diff --git a/.gitignore b/.gitignore
index b93fb7e..946c7ec 100644
--- a/.gitignore
+++ b/.gitignore
@@ -25,6 +25,7 @@
 *.elf
 *.bin
 *.gz
+*.bz2
 *.lzma
 *.patch
 *.gcno
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
index b0756d0..8bca1d5 100644
--- a/Documentation/DocBook/tracepoint.tmpl
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -86,4 +86,9 @@
 !Iinclude/trace/events/irq.h
   </chapter>
 
+  <chapter id="signal">
+   <title>SIGNAL</title>
+!Iinclude/trace/events/signal.h
+  </chapter>
+
 </book>
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 187bbf1..8608fd8 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -1,185 +1,10 @@
 CONFIG_RCU_TRACE debugfs Files and Formats
 
 
-The rcupreempt and rcutree implementations of RCU provide debugfs trace
-output that summarizes counters and state.  This information is useful for
-debugging RCU itself, and can sometimes also help to debug abuses of RCU.
-Note that the rcuclassic implementation of RCU does not provide debugfs
-trace output.
-
-The following sections describe the debugfs files and formats for
-preemptable RCU (rcupreempt) and hierarchical RCU (rcutree).
-
-
-Preemptable RCU debugfs Files and Formats
-
-This implementation of RCU provides three debugfs files under the
-top-level directory RCU: rcu/rcuctrs (which displays the per-CPU
-counters used by preemptable RCU) rcu/rcugp (which displays grace-period
-counters), and rcu/rcustats (which internal counters for debugging RCU).
-
-The output of "cat rcu/rcuctrs" looks as follows:
-
-CPU last cur F M
-  0    5  -5 0 0
-  1   -1   0 0 0
-  2    0   1 0 0
-  3    0   1 0 0
-  4    0   1 0 0
-  5    0   1 0 0
-  6    0   2 0 0
-  7    0  -1 0 0
-  8    0   1 0 0
-ggp = 26226, state = waitzero
-
-The per-CPU fields are as follows:
-
-o	"CPU" gives the CPU number.  Offline CPUs are not displayed.
-
-o	"last" gives the value of the counter that is being decremented
-	for the current grace period phase.  In the example above,
-	the counters sum to 4, indicating that there are still four
-	RCU read-side critical sections still running that started
-	before the last counter flip.
-
-o	"cur" gives the value of the counter that is currently being
-	both incremented (by rcu_read_lock()) and decremented (by
-	rcu_read_unlock()).  In the example above, the counters sum to
-	1, indicating that there is only one RCU read-side critical section
-	still running that started after the last counter flip.
-
-o	"F" indicates whether RCU is waiting for this CPU to acknowledge
-	a counter flip.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitack".
-
-o	"M" indicates whether RCU is waiting for this CPU to execute a
-	memory barrier.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitmb".
-
-o	"ggp" is the global grace-period counter.
-
-o	"state" is the RCU state, which can be one of the following:
-
-	o	"idle": there is no grace period in progress.
-
-	o	"waitack": RCU just incremented the global grace-period
-		counter, which has the effect of reversing the roles of
-		the "last" and "cur" counters above, and is waiting for
-		all the CPUs to acknowledge the flip.  Once the flip has
-		been acknowledged, CPUs will no longer be incrementing
-		what are now the "last" counters, so that their sum will
-		decrease monotonically down to zero.
-
-	o	"waitzero": RCU is waiting for the sum of the "last" counters
-		to decrease to zero.
-
-	o	"waitmb": RCU is waiting for each CPU to execute a memory
-		barrier, which ensures that instructions from a given CPU's
-		last RCU read-side critical section cannot be reordered
-		with instructions following the memory-barrier instruction.
-
-The output of "cat rcu/rcugp" looks as follows:
-
-oldggp=48870  newggp=48873
-
-Note that reading from this file provokes a synchronize_rcu().  The
-"oldggp" value is that of "ggp" from rcu/rcuctrs above, taken before
-executing the synchronize_rcu(), and the "newggp" value is also the
-"ggp" value, but taken after the synchronize_rcu() command returns.
-
-
-The output of "cat rcu/rcugp" looks as follows:
-
-na=1337955 nl=40 wa=1337915 wl=44 da=1337871 dl=0 dr=1337871 di=1337871
-1=50989 e1=6138 i1=49722 ie1=82 g1=49640 a1=315203 ae1=265563 a2=49640
-z1=1401244 ze1=1351605 z2=49639 m1=5661253 me1=5611614 m2=49639
-
-These are counters tracking internal preemptable-RCU events, however,
-some of them may be useful for debugging algorithms using RCU.  In
-particular, the "nl", "wl", and "dl" values track the number of RCU
-callbacks in various states.  The fields are as follows:
-
-o	"na" is the total number of RCU callbacks that have been enqueued
-	since boot.
-
-o	"nl" is the number of RCU callbacks waiting for the previous
-	grace period to end so that they can start waiting on the next
-	grace period.
-
-o	"wa" is the total number of RCU callbacks that have started waiting
-	for a grace period since boot.  "na" should be roughly equal to
-	"nl" plus "wa".
-
-o	"wl" is the number of RCU callbacks currently waiting for their
-	grace period to end.
-
-o	"da" is the total number of RCU callbacks whose grace periods
-	have completed since boot.  "wa" should be roughly equal to
-	"wl" plus "da".
-
-o	"dr" is the total number of RCU callbacks that have been removed
-	from the list of callbacks ready to invoke.  "dr" should be roughly
-	equal to "da".
-
-o	"di" is the total number of RCU callbacks that have been invoked
-	since boot.  "di" should be roughly equal to "da", though some
-	early versions of preemptable RCU had a bug so that only the
-	last CPU's count of invocations was displayed, rather than the
-	sum of all CPU's counts.
-
-o	"1" is the number of calls to rcu_try_flip().  This should be
-	roughly equal to the sum of "e1", "i1", "a1", "z1", and "m1"
-	described below.  In other words, the number of times that
-	the state machine is visited should be equal to the sum of the
-	number of times that each state is visited plus the number of
-	times that the state-machine lock acquisition failed.
-
-o	"e1" is the number of times that rcu_try_flip() was unable to
-	acquire the fliplock.
-
-o	"i1" is the number of calls to rcu_try_flip_idle().
-
-o	"ie1" is the number of times rcu_try_flip_idle() exited early
-	due to the calling CPU having no work for RCU.
-
-o	"g1" is the number of times that rcu_try_flip_idle() decided
-	to start a new grace period.  "i1" should be roughly equal to
-	"ie1" plus "g1".
-
-o	"a1" is the number of calls to rcu_try_flip_waitack().
-
-o	"ae1" is the number of times that rcu_try_flip_waitack() found
-	that at least one CPU had not yet acknowledge the new grace period
-	(AKA "counter flip").
-
-o	"a2" is the number of time rcu_try_flip_waitack() found that
-	all CPUs had acknowledged.  "a1" should be roughly equal to
-	"ae1" plus "a2".  (This particular output was collected on
-	a 128-CPU machine, hence the smaller-than-usual fraction of
-	calls to rcu_try_flip_waitack() finding all CPUs having already
-	acknowledged.)
-
-o	"z1" is the number of calls to rcu_try_flip_waitzero().
-
-o	"ze1" is the number of times that rcu_try_flip_waitzero() found
-	that not all of the old RCU read-side critical sections had
-	completed.
-
-o	"z2" is the number of times that rcu_try_flip_waitzero() finds
-	the sum of the counters equal to zero, in other words, that
-	all of the old RCU read-side critical sections had completed.
-	The value of "z1" should be roughly equal to "ze1" plus
-	"z2".
-
-o	"m1" is the number of calls to rcu_try_flip_waitmb().
-
-o	"me1" is the number of times that rcu_try_flip_waitmb() finds
-	that at least one CPU has not yet executed a memory barrier.
-
-o	"m2" is the number of times that rcu_try_flip_waitmb() finds that
-	all CPUs have executed a memory barrier.
+The rcutree implementation of RCU provides debugfs trace output that
+summarizes counters and state.  This information is useful for debugging
+RCU itself, and can sometimes also help to debug abuses of RCU.
+The following sections describe the debugfs files and formats.
 
 
 Hierarchical RCU debugfs Files and Formats
@@ -210,9 +35,10 @@
   6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
   7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
-The first section lists the rcu_data structures for rcu, the second for
-rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
-The fields are as follows:
+The first section lists the rcu_data structures for rcu_sched, the second
+for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
+additional section for rcu_preempt.  Each section has one line per CPU,
+or eight for this 8-CPU system.  The fields are as follows:
 
 o	The number at the beginning of each line is the CPU number.
 	CPUs numbers followed by an exclamation mark are offline,
@@ -223,9 +49,9 @@
 
 o	"c" is the count of grace periods that this CPU believes have
 	completed.  CPUs in dynticks idle mode may lag quite a ways
-	behind, for example, CPU 4 under "rcu" above, which has slept
-	through the past 25 RCU grace periods.	It is not unusual to
-	see CPUs lagging by thousands of grace periods.
+	behind, for example, CPU 4 under "rcu_sched" above, which has
+	slept through the past 25 RCU grace periods.  It is not unusual
+	to see CPUs lagging by thousands of grace periods.
 
 o	"g" is the count of grace periods that this CPU believes have
 	started.  Again, CPUs in dynticks idle mode may lag behind.
@@ -308,8 +134,10 @@
 rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
-Again, this output is for both "rcu" and "rcu_bh".  The fields are
-taken from the rcu_state structure, and are as follows:
+Again, this output is for both "rcu_sched" and "rcu_bh".  Note that
+kernels built with CONFIG_TREE_PREEMPT_RCU will have an additional
+"rcu_preempt" line.  The fields are taken from the rcu_state structure,
+and are as follows:
 
 o	"completed" is the number of grace periods that have completed.
 	It is comparable to the "c" field from rcu/rcudata in that a
@@ -324,23 +152,24 @@
 	If these two fields are equal (as they are for "rcu_bh" above),
 	then there is no grace period in progress, in other words, RCU
 	is idle.  On the other hand, if the two fields differ (as they
-	do for "rcu" above), then an RCU grace period is in progress.
+	do for "rcu_sched" above), then an RCU grace period is in progress.
 
 
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
-c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 0:127 ^0    
-3/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-3/3f 0:5 ^0    2/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3    
+c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0
+1/1 .>. 0:127 ^0    
+3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
 rcu_bh:
-c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 0:127 ^0    
-0/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-0/3f 0:5 ^0    0/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3
+c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0
+0/1 .>. 0:127 ^0    
+0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
 
-This is once again split into "rcu" and "rcu_bh" portions.  The fields are
-as follows:
+This is once again split into "rcu_sched" and "rcu_bh" portions,
+and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"c" is exactly the same as "completed" under rcu/rcugp.
 
@@ -372,6 +201,11 @@
 	exited immediately (without even being counted in nfqs above)
 	due to contention on ->fqslock.
 
+o	"oqlen" is the number of callbacks on the "orphan" callback
+	list.  RCU callbacks are placed on this list by CPUs going
+	offline, and are "adopted" either by the CPU helping the outgoing
+	CPU or by the next rcu_barrier*() call, whichever comes first.
+
 o	Each element of the form "1/1 0:127 ^0" represents one struct
 	rcu_node.  Each line represents one level of the hierarchy, from
 	root to leaves.  It is best to think of the rcu_data structures
@@ -379,7 +213,7 @@
 	might be either one, two, or three levels of rcu_node structures,
 	depending on the relationship between CONFIG_RCU_FANOUT and
 	CONFIG_NR_CPUS.
-	
+
 	o	The numbers separated by the "/" are the qsmask followed
 		by the qsmaskinit.  The qsmask will have one bit
 		set for each entity in the next lower level that
@@ -389,10 +223,19 @@
 		The value of qsmaskinit is assigned to that of qsmask
 		at the beginning of each grace period.
 
-		For example, for "rcu", the qsmask of the first entry
-		of the lowest level is 0x14, meaning that we are still
-		waiting for CPUs 2 and 4 to check in for the current
-		grace period.
+		For example, for "rcu_sched", the qsmask of the first
+		entry of the lowest level is 0x14, meaning that we
+		are still waiting for CPUs 2 and 4 to check in for the
+		current grace period.
+
+	o	The characters separated by the ">" indicate the state
+		of the blocked-tasks lists.  A "T" preceding the ">"
+		indicates that at least one task blocked in an RCU
+		read-side critical section blocks the current grace
+		period, while a "." preceding the ">" indicates otherwise.
+		The character following the ">" indicates similarly for
+		the next grace period.  A "T" should appear in this
+		field only for rcu-preempt.
 
 	o	The numbers separated by the ":" are the range of CPUs
 		served by this struct rcu_node.  This can be helpful
@@ -431,8 +274,9 @@
   6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
   7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
+As always, this is once again split into "rcu_sched" and "rcu_bh"
+portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"np" is the number of times that __rcu_pending() has been invoked
 	for the corresponding flavor of RCU.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index e41a7fe..d542ca2 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -830,7 +830,7 @@
 SRCU:	Critical sections	Grace period		Barrier
 
 	srcu_read_lock		synchronize_srcu	N/A
-	srcu_read_unlock
+	srcu_read_unlock	synchronize_srcu_expedited
 
 SRCU:	Initialization/cleanup
 	init_srcu_struct
diff --git a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
index 26422f0..b87292e 100644
--- a/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
+++ b/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
@@ -55,4 +55,4 @@
   This board is maintained by Simtec Electronics.
 
 
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 948c871..2af2cf3 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -134,4 +134,4 @@
 
 
 Ben Dooks, 03 October 2004
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index cff6227..081892d 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -299,4 +299,4 @@
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
+Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
index 295d971..f057876 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt
@@ -117,4 +117,4 @@
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
index ab2a888..909bdc7 100644
--- a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
+++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt
@@ -18,4 +18,4 @@
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/Samsung-S3C24XX/Suspend.txt b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
index a30fe51..7edd0e2 100644
--- a/Documentation/arm/Samsung-S3C24XX/Suspend.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Suspend.txt
@@ -133,5 +133,5 @@
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004 Simtec Electronics
+Ben Dooks, Copyright 2004 Simtec Electronics
 
diff --git a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
index 67671eb..f82b1fa 100644
--- a/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
+++ b/Documentation/arm/Samsung-S3C24XX/USB-Host.txt
@@ -90,4 +90,4 @@
 Document Author
 ---------------
 
-Ben Dooks, (c) 2005 Simtec Electronics
+Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg b/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg
new file mode 100644
index 0000000..f87cfa0
--- /dev/null
+++ b/Documentation/blockdev/drbd/DRBD-8.3-data-packets.svg
@@ -0,0 +1,588 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.0"
+   width="210mm"
+   height="297mm"
+   viewBox="0 0 21000 29700"
+   id="svg2"
+   style="fill-rule:evenodd">
+  <defs
+     id="defs4" />
+  <g
+     id="Default"
+     style="visibility:visible">
+    <desc
+       id="desc180">Master slide</desc>
+  </g>
+  <path
+     d="M 11999,8601 L 11899,8301 L 12099,8301 L 11999,8601 z"
+     id="path193"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,7801 L 11999,8361"
+     id="path197"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 7999,10401 L 7899,10101 L 8099,10101 L 7999,10401 z"
+     id="path209"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,9601 L 7999,10161"
+     id="path213"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 11999,7801 L 11685,7840 L 11724,7644 L 11999,7801 z"
+     id="path225"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,7001 L 11764,7754"
+     id="path229"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-1244.4792,1416.5139)"
+     id="g245"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text247">
+      <tspan
+         x="9139 9368 9579 9808 9986 10075 10252 10481 10659 10837 10909"
+         y="9284"
+         id="tspan249">RSDataReply</tspan>
+    </text>
+  </g>
+  <path
+     d="M 7999,9601 L 8281,9458 L 8311,9655 L 7999,9601 z"
+     id="path259"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,9001 L 8236,9565"
+     id="path263"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,1620.9382,-1639.4947)"
+     id="g279"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text281">
+      <tspan
+         x="8743 8972 9132 9310 9573 9801 10013 10242 10419 10597 10775 10953 11114"
+         y="7023"
+         id="tspan283">CsumRSRequest</tspan>
+    </text>
+  </g>
+  <text
+     id="text297"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
+       y="5707"
+       id="tspan299">w_make_resync_request()</tspan>
+  </text>
+  <text
+     id="text313"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
+       y="7806"
+       id="tspan315">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text329"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
+       y="8606"
+       id="tspan331">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text345"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13825 13986 14164 14426 14604 14710 14871 15049 15154 15332 15510 15616"
+       y="9007"
+       id="tspan347">w_e_end_csum_rs_req()</tspan>
+  </text>
+  <text
+     id="text361"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4444 4550 4728 4889 5066 5138 5299 5477 5655 5883 6095 6324 6501 6590 6768 6997 7175 7352 7424 7585 7691"
+       y="9507"
+       id="tspan363">receive_RSDataReply()</tspan>
+  </text>
+  <text
+     id="text377"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4457 4635 4741 4918 5096 5274 5452 5630 5807 5879 6057 6235 6464 6569 6641 6730 6908 7086 7247 7425 7585 7691"
+       y="10407"
+       id="tspan379">drbd_endio_write_sec()</tspan>
+  </text>
+  <text
+     id="text393"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4647 4825 5003 5180 5358 5536 5714 5820 5997 6158 6319 6497 6658 6836 7013 7085 7263 7424 7585 7691"
+       y="10907"
+       id="tspan395">e_end_resync_block()</tspan>
+  </text>
+  <path
+     d="M 11999,11601 L 11685,11640 L 11724,11444 L 11999,11601 z"
+     id="path405"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 7999,10801 L 11764,11554"
+     id="path409"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,2434.7562,-1674.649)"
+     id="g425"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text427">
+      <tspan
+         x="9320 9621 9726 9798 9887 10065 10277 10438"
+         y="10943"
+         id="tspan429">WriteAck</tspan>
+    </text>
+  </g>
+  <text
+     id="text443"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12555 12644 12821 13033 13105 13283 13444 13604 13816 13977 14138 14244"
+       y="11559"
+       id="tspan445">got_BlockAck()</tspan>
+  </text>
+  <text
+     id="text459"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7999 8304 8541 8778 8990 9201 9413 9650 10001 10120 10357 10594 10806 11043 11280 11398 11703 11940 12152 12364 12601 12812 12931 13049 13261 13498 13710 13947 14065 14302 14540 14658 14777 14870 15107 15225 15437 15649 15886"
+       y="4877"
+       id="tspan461">Checksum based Resync, case not in sync</tspan>
+  </text>
+  <text
+     id="text475"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="6961 7266 7571 7854 8159 8299 8536 8654 8891 9010 9247 9484 9603 9840 9958 10077 10170 10407"
+       y="2806"
+       id="tspan477">DRBD-8.3 data flow</tspan>
+  </text>
+  <text
+     id="text491"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5190 5419 5596 5774 5952 6113 6291 6468 6646 6824 6985 7146 7324 7586 7692"
+       y="7005"
+       id="tspan493">w_e_send_csum()</tspan>
+  </text>
+  <path
+     d="M 11999,17601 L 11899,17301 L 12099,17301 L 11999,17601 z"
+     id="path503"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,16801 L 11999,17361"
+     id="path507"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 11999,16801 L 11685,16840 L 11724,16644 L 11999,16801 z"
+     id="path519"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,16001 L 11764,16754"
+     id="path523"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-2539.5806,1529.3491)"
+     id="g539"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text541">
+      <tspan
+         x="9269 9498 9709 9798 9959 10048 10226 10437 10598 10776"
+         y="18265"
+         id="tspan543">RSIsInSync</tspan>
+    </text>
+  </g>
+  <path
+     d="M 7999,18601 L 8281,18458 L 8311,18655 L 7999,18601 z"
+     id="path553"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 11999,18001 L 8236,18565"
+     id="path557"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,3461.4027,-1449.3012)"
+     id="g573"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text575">
+      <tspan
+         x="8743 8972 9132 9310 9573 9801 10013 10242 10419 10597 10775 10953 11114"
+         y="16023"
+         id="tspan577">CsumRSRequest</tspan>
+    </text>
+  </g>
+  <text
+     id="text591"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
+       y="16806"
+       id="tspan593">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text607"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
+       y="17606"
+       id="tspan609">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text623"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13825 13986 14164 14426 14604 14710 14871 15049 15154 15332 15510 15616"
+       y="18007"
+       id="tspan625">w_e_end_csum_rs_req()</tspan>
+  </text>
+  <text
+     id="text639"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5735 5913 6091 6180 6357 6446 6607 6696 6874 7085 7246 7424 7585 7691"
+       y="18507"
+       id="tspan641">got_IsInSync()</tspan>
+  </text>
+  <text
+     id="text655"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7999 8304 8541 8778 8990 9201 9413 9650 10001 10120 10357 10594 10806 11043 11280 11398 11703 11940 12152 12364 12601 12812 12931 13049 13261 13498 13710 13947 14065 14159 14396 14514 14726 14937 15175"
+       y="13877"
+       id="tspan657">Checksum based Resync, case in sync</tspan>
+  </text>
+  <path
+     d="M 12000,24601 L 11900,24301 L 12100,24301 L 12000,24601 z"
+     id="path667"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,23801 L 12000,24361"
+     id="path671"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 8000,26401 L 7900,26101 L 8100,26101 L 8000,26401 z"
+     id="path683"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,25601 L 8000,26161"
+     id="path687"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 12000,23801 L 11686,23840 L 11725,23644 L 12000,23801 z"
+     id="path699"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,23001 L 11765,23754"
+     id="path703"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,-3543.8452,1630.5143)"
+     id="g719"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text721">
+      <tspan
+         x="9464 9710 9921 10150 10328 10505 10577"
+         y="25236"
+         id="tspan723">OVReply</tspan>
+    </text>
+  </g>
+  <path
+     d="M 8000,25601 L 8282,25458 L 8312,25655 L 8000,25601 z"
+     id="path733"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,25001 L 8237,25565"
+     id="path737"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,4918.2801,-1381.2128)"
+     id="g753"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text755">
+      <tspan
+         x="9142 9388 9599 9828 10006 10183 10361 10539 10700"
+         y="23106"
+         id="tspan757">OVRequest</tspan>
+    </text>
+  </g>
+  <text
+     id="text771"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13656 13868 14097 14274 14452 14630 14808 14969 15058 15163"
+       y="23806"
+       id="tspan773">receive_OVRequest()</tspan>
+  </text>
+  <text
+     id="text787"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14084 14262 14439 14617 14795 14956 15134 15295 15400"
+       y="24606"
+       id="tspan789">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text803"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12192 12421 12598 12776 12954 13132 13310 13487 13665 13843 14004 14182 14288 14465 14643 14749"
+       y="25007"
+       id="tspan805">w_e_end_ov_req()</tspan>
+  </text>
+  <text
+     id="text819"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5101 5207 5385 5546 5723 5795 5956 6134 6312 6557 6769 6998 7175 7353 7425 7586 7692"
+       y="25507"
+       id="tspan821">receive_OVReply()</tspan>
+  </text>
+  <text
+     id="text835"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
+       y="26407"
+       id="tspan837">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text851"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4902 5131 5308 5486 5664 5842 6020 6197 6375 6553 6714 6892 6998 7175 7353 7425 7586 7692"
+       y="26907"
+       id="tspan853">w_e_end_ov_reply()</tspan>
+  </text>
+  <path
+     d="M 12000,27601 L 11686,27640 L 11725,27444 L 12000,27601 z"
+     id="path863"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 8000,26801 L 11765,27554"
+     id="path867"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <g
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,5704.1907,-1328.312)"
+     id="g883"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <text
+       id="text885">
+      <tspan
+         x="9279 9525 9736 9965 10143 10303 10481 10553"
+         y="26935"
+         id="tspan887">OVResult</tspan>
+    </text>
+  </g>
+  <text
+     id="text901"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12556 12645 12822 13068 13280 13508 13686 13847 14025 14097 14185 14291"
+       y="27559"
+       id="tspan903">got_OVResult()</tspan>
+  </text>
+  <text
+     id="text917"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8000 8330 8567 8660 8754 8991 9228 9346 9558 9795 9935 10028 10146"
+       y="21877"
+       id="tspan919">Online verify</tspan>
+  </text>
+  <text
+     id="text933"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4641 4870 5047 5310 5488 5649 5826 6004 6182 6343 6521 6626 6804 6982 7160 7338 7499 7587 7693"
+       y="23005"
+       id="tspan935">w_make_ov_request()</tspan>
+  </text>
+  <path
+     d="M 8000,6500 L 7900,6200 L 8100,6200 L 8000,6500 z"
+     id="path945"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,5700 L 8000,6260"
+     id="path949"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 3900,5500 L 3700,5500 L 3700,11000 L 3900,11000"
+     id="path961"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 3900,14500 L 3700,14500 L 3700,18600 L 3900,18600"
+     id="path973"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 3900,22800 L 3700,22800 L 3700,26900 L 3900,26900"
+     id="path985"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <text
+     id="text1001"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
+       y="6506"
+       id="tspan1003">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text1017"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
+       y="14708"
+       id="tspan1019">w_make_resync_request()</tspan>
+  </text>
+  <text
+     id="text1033"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5190 5419 5596 5774 5952 6113 6291 6468 6646 6824 6985 7146 7324 7586 7692"
+       y="16006"
+       id="tspan1035">w_e_send_csum()</tspan>
+  </text>
+  <path
+     d="M 8000,15501 L 7900,15201 L 8100,15201 L 8000,15501 z"
+     id="path1045"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,14701 L 8000,15261"
+     id="path1049"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     id="text1065"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4492 4670 4776 4953 5131 5309 5487 5665 5842 5914 6092 6270 6376 6554 6731 6909 7087 7248 7426 7587 7692"
+       y="15507"
+       id="tspan1067">drbd_endio_read_sec()</tspan>
+  </text>
+  <path
+     d="M 16100,9000 L 16300,9000 L 16300,7500 L 16100,7500"
+     id="path1077"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 16100,18000 L 16300,18000 L 16300,16500 L 16100,16500"
+     id="path1089"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 16100,25000 L 16300,25000 L 16300,23500 L 16100,23500"
+     id="path1101"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <text
+     id="text1117"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2026 2132 2293 2471 2648 2826 3004 3076 3254 3431 3503 3681 3787"
+       y="5402"
+       id="tspan1119">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1133"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2027 2133 2294 2472 2649 2827 3005 3077 3255 3432 3504 3682 3788"
+       y="14402"
+       id="tspan1135">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1149"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2026 2132 2293 2471 2648 2826 3004 3076 3254 3431 3503 3681 3787"
+       y="22602"
+       id="tspan1151">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1165"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1426 1532 1693 1871 2031 2209 2472 2649 2721 2899 2988 3166 3344 3416 3593 3699"
+       y="11302"
+       id="tspan1167">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1181"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1526 1632 1793 1971 2131 2309 2572 2749 2821 2999 3088 3266 3444 3516 3693 3799"
+       y="18931"
+       id="tspan1183">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1197"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1526 1632 1793 1971 2131 2309 2572 2749 2821 2999 3088 3266 3444 3516 3693 3799"
+       y="27231"
+       id="tspan1199">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1213"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16126 16232 16393 16571 16748 16926 17104 17176 17354 17531 17603 17781 17887"
+       y="7402"
+       id="tspan1215">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1229"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16127 16233 16394 16572 16749 16927 17105 17177 17355 17532 17604 17782 17888"
+       y="16331"
+       id="tspan1231">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1245"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16127 16233 16394 16572 16749 16927 17105 17177 17355 17532 17604 17782 17888"
+       y="23302"
+       id="tspan1247">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1261"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
+       y="9302"
+       id="tspan1263">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1277"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
+       y="18331"
+       id="tspan1279">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1293"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16126 16232 16393 16571 16731 16909 17172 17349 17421 17599 17688 17866 18044 18116 18293 18399"
+       y="25302"
+       id="tspan1295">rs_complete_io()</tspan>
+  </text>
+</svg>
diff --git a/Documentation/blockdev/drbd/DRBD-data-packets.svg b/Documentation/blockdev/drbd/DRBD-data-packets.svg
new file mode 100644
index 0000000..48a1e21
--- /dev/null
+++ b/Documentation/blockdev/drbd/DRBD-data-packets.svg
@@ -0,0 +1,459 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+<svg
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   version="1.0"
+   width="210mm"
+   height="297mm"
+   viewBox="0 0 21000 29700"
+   id="svg2"
+   style="fill-rule:evenodd">
+  <defs
+     id="defs4" />
+  <g
+     id="Default"
+     style="visibility:visible">
+    <desc
+       id="desc176">Master slide</desc>
+  </g>
+  <path
+     d="M 11999,19601 L 11899,19301 L 12099,19301 L 11999,19601 z"
+     id="path189"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,18801 L 11999,19361"
+     id="path193"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 7999,21401 L 7899,21101 L 8099,21101 L 7999,21401 z"
+     id="path205"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,20601 L 7999,21161"
+     id="path209"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 11999,18801 L 11685,18840 L 11724,18644 L 11999,18801 z"
+     id="path221"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 7999,18001 L 11764,18754"
+     id="path225"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="-3023.845"
+     y="1106.8124"
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
+     id="text243"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="6115.1553 6344.1553 6555.1553 6784.1553 6962.1553 7051.1553 7228.1553 7457.1553 7635.1553 7813.1553 7885.1553"
+       y="21390.812"
+       id="tspan245">RSDataReply</tspan>
+  </text>
+  <path
+     d="M 7999,20601 L 8281,20458 L 8311,20655 L 7999,20601 z"
+     id="path255"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 11999,20001 L 8236,20565"
+     id="path259"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="3502.5356"
+     y="-2184.6621"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text277"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12321.536 12550.536 12761.536 12990.536 13168.536 13257.536 13434.536 13663.536 13841.536 14019.536 14196.536 14374.536 14535.536"
+       y="15854.338"
+       id="tspan279">RSDataRequest</tspan>
+  </text>
+  <text
+     id="text293"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4034 4263 4440 4703 4881 5042 5219 5397 5503 5681 5842 6003 6180 6341 6519 6625 6803 6980 7158 7336 7497 7586 7692"
+       y="17807"
+       id="tspan295">w_make_resync_request()</tspan>
+  </text>
+  <text
+     id="text309"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12305 12483 12644 12821 12893 13054 13232 13410 13638 13816 13905 14083 14311 14489 14667 14845 15023 15184 15272 15378"
+       y="18806"
+       id="tspan311">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text325"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12483 12660 12838 13016 13194 13372 13549 13621 13799 13977 14083 14261 14438 14616 14794 14955 15133 15294 15399"
+       y="19606"
+       id="tspan327">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text341"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12191 12420 12597 12775 12953 13131 13309 13486 13664 13770 13931 14109 14287 14375 14553 14731 14837 15015 15192 15298"
+       y="20007"
+       id="tspan343">w_e_end_rsdata_req()</tspan>
+  </text>
+  <text
+     id="text357"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4444 4550 4728 4889 5066 5138 5299 5477 5655 5883 6095 6324 6501 6590 6768 6997 7175 7352 7424 7585 7691"
+       y="20507"
+       id="tspan359">receive_RSDataReply()</tspan>
+  </text>
+  <text
+     id="text373"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4457 4635 4741 4918 5096 5274 5452 5630 5807 5879 6057 6235 6464 6569 6641 6730 6908 7086 7247 7425 7585 7691"
+       y="21407"
+       id="tspan375">drbd_endio_write_sec()</tspan>
+  </text>
+  <text
+     id="text389"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4647 4825 5003 5180 5358 5536 5714 5820 5997 6158 6319 6497 6658 6836 7013 7085 7263 7424 7585 7691"
+       y="21907"
+       id="tspan391">e_end_resync_block()</tspan>
+  </text>
+  <path
+     d="M 11999,22601 L 11685,22640 L 11724,22444 L 11999,22601 z"
+     id="path401"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 7999,21801 L 11764,22554"
+     id="path405"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <text
+     x="4290.3008"
+     y="-2369.6162"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text423"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="13610.301 13911.301 14016.301 14088.301 14177.301 14355.301 14567.301 14728.301"
+       y="19573.385"
+       id="tspan425">WriteAck</tspan>
+  </text>
+  <text
+     id="text439"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12199 12377 12555 12644 12821 13033 13105 13283 13444 13604 13816 13977 14138 14244"
+       y="22559"
+       id="tspan441">got_BlockAck()</tspan>
+  </text>
+  <text
+     id="text455"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7999 8304 8541 8753 8964 9201 9413 9531 9769 9862 10099 10310 10522 10734 10852 10971 11208 11348 11585 11822"
+       y="16877"
+       id="tspan457">Resync blocks, 4-32K</tspan>
+  </text>
+  <path
+     d="M 12000,7601 L 11900,7301 L 12100,7301 L 12000,7601 z"
+     id="path467"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,6801 L 12000,7361"
+     id="path471"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 12000,6801 L 11686,6840 L 11725,6644 L 12000,6801 z"
+     id="path483"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,6001 L 11765,6754"
+     id="path487"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="-1288.1796"
+     y="1279.7666"
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
+     id="text505"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8174.8208 8475.8203 8580.8203 8652.8203 8741.8203 8919.8203 9131.8203 9292.8203"
+       y="9516.7666"
+       id="tspan507">WriteAck</tspan>
+  </text>
+  <path
+     d="M 8000,8601 L 8282,8458 L 8312,8655 L 8000,8601 z"
+     id="path517"
+     style="fill:#000080;visibility:visible" />
+  <path
+     d="M 12000,8001 L 8237,8565"
+     id="path521"
+     style="fill:none;stroke:#000080;visibility:visible" />
+  <text
+     x="1065.6655"
+     y="-2097.7664"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text539"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="10682.666 10911.666 11088.666 11177.666"
+       y="4107.2339"
+       id="tspan541">Data</tspan>
+  </text>
+  <text
+     id="text555"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4746 4924 5030 5207 5385 5563 5826 6003 6164 6342 6520 6626 6803 6981 7159 7337 7498 7587 7692"
+       y="5505"
+       id="tspan557">drbd_make_request()</tspan>
+  </text>
+  <text
+     id="text571"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13639 13817 13906 14084 14190"
+       y="6806"
+       id="tspan573">receive_Data()</tspan>
+  </text>
+  <text
+     id="text587"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14207 14312 14384 14473 14651 14829 14990 15168 15328 15434"
+       y="7606"
+       id="tspan589">drbd_endio_write_sec()</tspan>
+  </text>
+  <text
+     id="text603"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12192 12370 12548 12725 12903 13081 13259 13437 13509 13686 13847 14008 14114"
+       y="8007"
+       id="tspan605">e_end_block()</tspan>
+  </text>
+  <text
+     id="text619"
+     style="font-size:318px;font-weight:400;fill:#000080;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5647 5825 6003 6092 6269 6481 6553 6731 6892 7052 7264 7425 7586 7692"
+       y="8606"
+       id="tspan621">got_BlockAck()</tspan>
+  </text>
+  <text
+     id="text635"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8000 8305 8542 8779 9016 9109 9346 9486 9604 9956 10049 10189 10328 10565 10705 10942 11179 11298 11603 11742 11835 11954 12191 12310 12428 12665 12902 13139 13279 13516 13753"
+       y="4877"
+       id="tspan637">Regular mirrored write, 512-32K</tspan>
+  </text>
+  <text
+     id="text651"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5381 5610 5787 5948 6126 6304 6482 6659 6837 7015 7087 7265 7426 7587 7692"
+       y="6003"
+       id="tspan653">w_send_dblock()</tspan>
+  </text>
+  <path
+     d="M 8000,6800 L 7900,6500 L 8100,6500 L 8000,6800 z"
+     id="path663"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,6000 L 8000,6560"
+     id="path667"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     id="text683"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4602 4780 4886 5063 5241 5419 5597 5775 5952 6024 6202 6380 6609 6714 6786 6875 7053 7231 7409 7515 7587 7692"
+       y="6905"
+       id="tspan685">drbd_endio_write_pri()</tspan>
+  </text>
+  <path
+     d="M 12000,13602 L 11900,13302 L 12100,13302 L 12000,13602 z"
+     id="path695"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,12802 L 12000,13362"
+     id="path699"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <path
+     d="M 12000,12802 L 11686,12841 L 11725,12645 L 12000,12802 z"
+     id="path711"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 8000,12002 L 11765,12755"
+     id="path715"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="-2155.5266"
+     y="1201.5964"
+     transform="matrix(0.9895258,-0.1443562,0.1443562,0.9895258,0,0)"
+     id="text733"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="7202.4736 7431.4736 7608.4736 7697.4736 7875.4736 8104.4736 8282.4736 8459.4736 8531.4736"
+       y="15454.597"
+       id="tspan735">DataReply</tspan>
+  </text>
+  <path
+     d="M 8000,14602 L 8282,14459 L 8312,14656 L 8000,14602 z"
+     id="path745"
+     style="fill:#008000;visibility:visible" />
+  <path
+     d="M 12000,14002 L 8237,14566"
+     id="path749"
+     style="fill:none;stroke:#008000;visibility:visible" />
+  <text
+     x="2280.3804"
+     y="-2103.2141"
+     transform="matrix(0.9788674,0.2044961,-0.2044961,0.9788674,0,0)"
+     id="text767"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="11316.381 11545.381 11722.381 11811.381 11989.381 12218.381 12396.381 12573.381 12751.381 12929.381 13090.381"
+       y="9981.7861"
+       id="tspan769">DataRequest</tspan>
+  </text>
+  <text
+     id="text783"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="4746 4924 5030 5207 5385 5563 5826 6003 6164 6342 6520 6626 6803 6981 7159 7337 7498 7587 7692"
+       y="11506"
+       id="tspan785">drbd_make_request()</tspan>
+  </text>
+  <text
+     id="text799"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12306 12484 12645 12822 12894 13055 13233 13411 13639 13817 13906 14084 14312 14490 14668 14846 15024 15185 15273 15379"
+       y="12807"
+       id="tspan801">receive_DataRequest()</tspan>
+  </text>
+  <text
+     id="text815"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12200 12378 12484 12661 12839 13017 13195 13373 13550 13622 13800 13978 14084 14262 14439 14617 14795 14956 15134 15295 15400"
+       y="13607"
+       id="tspan817">drbd_endio_read_sec()</tspan>
+  </text>
+  <text
+     id="text831"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="12192 12421 12598 12776 12954 13132 13310 13487 13665 13843 14021 14110 14288 14465 14571 14749 14927 15033"
+       y="14008"
+       id="tspan833">w_e_end_data_req()</tspan>
+  </text>
+  <g
+     id="g835"
+     style="visibility:visible">
+    <desc
+       id="desc837">Drawing</desc>
+    <text
+       id="text847"
+       style="font-size:318px;font-weight:400;fill:#008000;font-family:Helvetica embedded">
+      <tspan
+         x="4885 4991 5169 5330 5507 5579 5740 5918 6096 6324 6502 6591 6769 6997 7175 7353 7425 7586 7692"
+         y="14607"
+         id="tspan849">receive_DataReply()</tspan>
+    </text>
+  </g>
+  <text
+     id="text863"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="8000 8305 8398 8610 8821 8914 9151 9363 9575 9693 9833 10070 10307 10544 10663 10781 11018 11255 11493 11632 11869 12106"
+       y="10878"
+       id="tspan865">Diskless read, 512-32K</tspan>
+  </text>
+  <text
+     id="text879"
+     style="font-size:318px;font-weight:400;fill:#008000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="5029 5258 5435 5596 5774 5952 6130 6307 6413 6591 6769 6947 7125 7230 7408 7586 7692"
+       y="12004"
+       id="tspan881">w_send_read_req()</tspan>
+  </text>
+  <text
+     id="text895"
+     style="font-size:423px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="6961 7266 7571 7854 8159 8278 8515 8633 8870 9107 9226 9463 9581 9700 9793 10030"
+       y="2806"
+       id="tspan897">DRBD 8 data flow</tspan>
+  </text>
+  <path
+     d="M 3900,5300 L 3700,5300 L 3700,7000 L 3900,7000"
+     id="path907"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 3900,17600 L 3700,17600 L 3700,22000 L 3900,22000"
+     id="path919"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <path
+     d="M 16100,20000 L 16300,20000 L 16300,18500 L 16100,18500"
+     id="path931"
+     style="fill:none;stroke:#000000;visibility:visible" />
+  <text
+     id="text947"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2126 2304 2376 2554 2731 2909 3087 3159 3337 3515 3587 3764 3870"
+       y="5202"
+       id="tspan949">al_begin_io()</tspan>
+  </text>
+  <text
+     id="text963"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1632 1810 1882 2060 2220 2398 2661 2839 2910 3088 3177 3355 3533 3605 3783 3888"
+       y="7331"
+       id="tspan965">al_complete_io()</tspan>
+  </text>
+  <text
+     id="text979"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="2126 2232 2393 2571 2748 2926 3104 3176 3354 3531 3603 3781 3887"
+       y="17431"
+       id="tspan981">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text995"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="1626 1732 1893 2071 2231 2409 2672 2849 2921 3099 3188 3366 3544 3616 3793 3899"
+       y="22331"
+       id="tspan997">rs_complete_io()</tspan>
+  </text>
+  <text
+     id="text1011"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16027 16133 16294 16472 16649 16827 17005 17077 17255 17432 17504 17682 17788"
+       y="18402"
+       id="tspan1013">rs_begin_io()</tspan>
+  </text>
+  <text
+     id="text1027"
+     style="font-size:318px;font-weight:400;fill:#000000;visibility:visible;font-family:Helvetica embedded">
+    <tspan
+       x="16115 16221 16382 16560 16720 16898 17161 17338 17410 17588 17677 17855 18033 18105 18282 18388"
+       y="20331"
+       id="tspan1029">rs_complete_io()</tspan>
+  </text>
+</svg>
diff --git a/Documentation/blockdev/drbd/README.txt b/Documentation/blockdev/drbd/README.txt
new file mode 100644
index 0000000..627b0a1
--- /dev/null
+++ b/Documentation/blockdev/drbd/README.txt
@@ -0,0 +1,16 @@
+Description
+
+  DRBD is a shared-nothing, synchronously replicated block device. It
+  is designed to serve as a building block for high availability
+  clusters and in this context, is a "drop-in" replacement for shared
+  storage. Simplistically, you could see it as a network RAID 1.
+
+  Please visit http://www.drbd.org to find out more.
+
+The here included files are intended to help understand the implementation
+
+DRBD-8.3-data-packets.svg, DRBD-data-packets.svg  
+  relates some functions, and write packets.
+
+conn-states-8.dot, disk-states-8.dot, node-states-8.dot
+  The sub graphs of DRBD's state transitions
diff --git a/Documentation/blockdev/drbd/conn-states-8.dot b/Documentation/blockdev/drbd/conn-states-8.dot
new file mode 100644
index 0000000..025e8cf
--- /dev/null
+++ b/Documentation/blockdev/drbd/conn-states-8.dot
@@ -0,0 +1,18 @@
+digraph conn_states {
+	StandAllone  -> WFConnection   [ label = "ioctl_set_net()" ]
+	WFConnection -> Unconnected    [ label = "unable to bind()" ]
+	WFConnection -> WFReportParams [ label = "in connect() after accept" ]
+	WFReportParams -> StandAllone  [ label = "checks in receive_param()" ]
+	WFReportParams -> Connected    [ label = "in receive_param()" ]
+	WFReportParams -> WFBitMapS    [ label = "sync_handshake()" ]
+	WFReportParams -> WFBitMapT    [ label = "sync_handshake()" ]
+	WFBitMapS -> SyncSource        [ label = "receive_bitmap()" ]
+	WFBitMapT -> SyncTarget        [ label = "receive_bitmap()" ]
+	SyncSource -> Connected
+	SyncTarget -> Connected
+	SyncSource -> PausedSyncS
+	SyncTarget -> PausedSyncT
+	PausedSyncS -> SyncSource
+	PausedSyncT -> SyncTarget
+	Connected   -> WFConnection    [ label = "* on network error" ]
+}
diff --git a/Documentation/blockdev/drbd/disk-states-8.dot b/Documentation/blockdev/drbd/disk-states-8.dot
new file mode 100644
index 0000000..d06cfb4
--- /dev/null
+++ b/Documentation/blockdev/drbd/disk-states-8.dot
@@ -0,0 +1,16 @@
+digraph disk_states {
+	Diskless -> Inconsistent       [ label = "ioctl_set_disk()" ]
+	Diskless -> Consistent         [ label = "ioctl_set_disk()" ]
+	Diskless -> Outdated           [ label = "ioctl_set_disk()" ]
+	Consistent -> Outdated         [ label = "receive_param()" ]
+	Consistent -> UpToDate         [ label = "receive_param()" ]
+	Consistent -> Inconsistent     [ label = "start resync" ]
+	Outdated   -> Inconsistent     [ label = "start resync" ]
+	UpToDate   -> Inconsistent     [ label = "ioctl_replicate" ]
+	Inconsistent -> UpToDate       [ label = "resync completed" ]
+	Consistent -> Failed           [ label = "io completion error" ]
+	Outdated   -> Failed           [ label = "io completion error" ]
+	UpToDate   -> Failed           [ label = "io completion error" ]
+	Inconsistent -> Failed         [ label = "io completion error" ]
+	Failed -> Diskless             [ label = "sending notify to peer" ]
+}
diff --git a/Documentation/blockdev/drbd/drbd-connection-state-overview.dot b/Documentation/blockdev/drbd/drbd-connection-state-overview.dot
new file mode 100644
index 0000000..6d9cf0a
--- /dev/null
+++ b/Documentation/blockdev/drbd/drbd-connection-state-overview.dot
@@ -0,0 +1,85 @@
+// vim: set sw=2 sts=2 :
+digraph {
+  rankdir=BT
+  bgcolor=white
+
+  node [shape=plaintext]
+  node [fontcolor=black]
+
+  StandAlone     [ style=filled,fillcolor=gray,label=StandAlone ]
+
+  node [fontcolor=lightgray]
+
+  Unconnected    [ label=Unconnected ]
+
+  CommTrouble [ shape=record,
+    label="{communication loss|{Timeout|BrokenPipe|NetworkFailure}}" ]
+
+  node [fontcolor=gray]
+
+  subgraph cluster_try_connect {
+    label="try to connect, handshake"
+    rank=max
+    WFConnection   [ label=WFConnection ]
+    WFReportParams [ label=WFReportParams ]
+  }
+
+  TearDown       [ label=TearDown ]
+
+  Connected      [ label=Connected,style=filled,fillcolor=green,fontcolor=black ]
+
+  node [fontcolor=lightblue]
+
+  StartingSyncS  [ label=StartingSyncS ]
+  StartingSyncT  [ label=StartingSyncT ]
+
+  subgraph cluster_bitmap_exchange {
+    node [fontcolor=red]
+    fontcolor=red
+    label="new application (WRITE?) requests blocked\lwhile bitmap is exchanged"
+
+    WFBitMapT      [ label=WFBitMapT ]
+    WFSyncUUID     [ label=WFSyncUUID ]
+    WFBitMapS      [ label=WFBitMapS ]
+  }
+
+  node [fontcolor=blue]
+
+  cluster_resync [ shape=record,label="{<any>resynchronisation process running\l'concurrent' application requests allowed|{{<T>PausedSyncT\nSyncTarget}|{<S>PausedSyncS\nSyncSource}}}" ]
+
+  node [shape=box,fontcolor=black]
+
+  // drbdadm [label="drbdadm connect"]
+  // handshake [label="drbd_connect()\ndrbd_do_handshake\ndrbd_sync_handshake() etc."]
+  // comm_error [label="communication trouble"]
+
+  //
+  // edges
+  // --------------------------------------
+
+  StandAlone -> Unconnected [ label="drbdadm connect" ]
+  Unconnected -> StandAlone  [ label="drbdadm disconnect\lor serious communication trouble" ]
+  Unconnected -> WFConnection [ label="receiver thread is started" ]
+  WFConnection -> WFReportParams [ headlabel="accept()\land/or                        \lconnect()\l" ]
+
+  WFReportParams -> StandAlone [ label="during handshake\lpeers do not agree\labout something essential" ]
+  WFReportParams -> Connected [ label="data identical\lno sync needed",color=green,fontcolor=green ]
+
+    WFReportParams -> WFBitMapS
+    WFReportParams -> WFBitMapT
+    WFBitMapT -> WFSyncUUID [minlen=0.1,constraint=false]
+
+      WFBitMapS -> cluster_resync:S
+      WFSyncUUID -> cluster_resync:T
+
+  edge [color=green]
+  cluster_resync:any -> Connected [ label="resnyc done",fontcolor=green ]
+
+  edge [color=red]
+  WFReportParams -> CommTrouble
+  Connected -> CommTrouble
+  cluster_resync:any -> CommTrouble
+  edge [color=black]
+  CommTrouble -> Unconnected [label="receiver thread is stopped" ]
+
+}
diff --git a/Documentation/blockdev/drbd/node-states-8.dot b/Documentation/blockdev/drbd/node-states-8.dot
new file mode 100644
index 0000000..4a2b00c
--- /dev/null
+++ b/Documentation/blockdev/drbd/node-states-8.dot
@@ -0,0 +1,14 @@
+digraph node_states {
+	Secondary -> Primary           [ label = "ioctl_set_state()" ]
+	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
+}
+
+digraph peer_states {
+	Secondary -> Primary           [ label = "recv state packet" ]
+	Primary   -> Secondary 	       [ label = "recv state packet" ]
+	Primary   -> Unknown 	       [ label = "connection lost" ]
+	Secondary  -> Unknown  	       [ label = "connection lost" ]
+	Unknown   -> Primary           [ label = "connected" ]
+	Unknown   -> Secondary         [ label = "connected" ]
+}
+
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
new file mode 100644
index 0000000..630879c
--- /dev/null
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -0,0 +1,135 @@
+				Block IO Controller
+				===================
+Overview
+========
+cgroup subsys "blkio" implements the block io controller. There seems to be
+a need of various kinds of IO control policies (like proportional BW, max BW)
+both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
+Plan is to use the same cgroup based management interface for blkio controller
+and based on user options switch IO policies in the background.
+
+In the first phase, this patchset implements proportional weight time based
+division of disk policy. It is implemented in CFQ. Hence this policy takes
+effect only on leaf nodes when CFQ is being used.
+
+HOWTO
+=====
+You can do a very simple testing of running two dd threads in two different
+cgroups. Here is what you can do.
+
+- Enable group scheduling in CFQ
+	CONFIG_CFQ_GROUP_IOSCHED=y
+
+- Compile and boot into kernel and mount IO controller (blkio).
+
+	mount -t cgroup -o blkio none /cgroup
+
+- Create two cgroups
+	mkdir -p /cgroup/test1/ /cgroup/test2
+
+- Set weights of group test1 and test2
+	echo 1000 > /cgroup/test1/blkio.weight
+	echo 500 > /cgroup/test2/blkio.weight
+
+- Create two same size files (say 512MB each) on same disk (file1, file2) and
+  launch two dd threads in different cgroup to read those files.
+
+	sync
+	echo 3 > /proc/sys/vm/drop_caches
+
+	dd if=/mnt/sdb/zerofile1 of=/dev/null &
+	echo $! > /cgroup/test1/tasks
+	cat /cgroup/test1/tasks
+
+	dd if=/mnt/sdb/zerofile2 of=/dev/null &
+	echo $! > /cgroup/test2/tasks
+	cat /cgroup/test2/tasks
+
+- At macro level, first dd should finish first. To get more precise data, keep
+  on looking at (with the help of script), at blkio.disk_time and
+  blkio.disk_sectors files of both test1 and test2 groups. This will tell how
+  much disk time (in milli seconds), each group got and how many secotors each
+  group dispatched to the disk. We provide fairness in terms of disk time, so
+  ideally io.disk_time of cgroups should be in proportion to the weight.
+
+Various user visible config options
+===================================
+CONFIG_CFQ_GROUP_IOSCHED
+	- Enables group scheduling in CFQ. Currently only 1 level of group
+	  creation is allowed.
+
+CONFIG_DEBUG_CFQ_IOSCHED
+	- Enables some debugging messages in blktrace. Also creates extra
+	  cgroup file blkio.dequeue.
+
+Config options selected automatically
+=====================================
+These config options are not user visible and are selected/deselected
+automatically based on IO scheduler configuration.
+
+CONFIG_BLK_CGROUP
+	- Block IO controller. Selected by CONFIG_CFQ_GROUP_IOSCHED.
+
+CONFIG_DEBUG_BLK_CGROUP
+	- Debug help. Selected by CONFIG_DEBUG_CFQ_IOSCHED.
+
+Details of cgroup files
+=======================
+- blkio.weight
+	- Specifies per cgroup weight.
+
+	  Currently allowed range of weights is from 100 to 1000.
+
+- blkio.time
+	- disk time allocated to cgroup per device in milliseconds. First
+	  two fields specify the major and minor number of the device and
+	  third field specifies the disk time allocated to group in
+	  milliseconds.
+
+- blkio.sectors
+	- number of sectors transferred to/from disk by the group. First
+	  two fields specify the major and minor number of the device and
+	  third field specifies the number of sectors transferred by the
+	  group to/from the device.
+
+- blkio.dequeue
+	- Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y. This
+	  gives the statistics about how many a times a group was dequeued
+	  from service tree of the device. First two fields specify the major
+	  and minor number of the device and third field specifies the number
+	  of times a group was dequeued from a particular device.
+
+CFQ sysfs tunable
+=================
+/sys/block/<disk>/queue/iosched/group_isolation
+
+If group_isolation=1, it provides stronger isolation between groups at the
+expense of throughput. By default group_isolation is 0. In general that
+means that if group_isolation=0, expect fairness for sequential workload
+only. Set group_isolation=1 to see fairness for random IO workload also.
+
+Generally CFQ will put random seeky workload in sync-noidle category. CFQ
+will disable idling on these queues and it does a collective idling on group
+of such queues. Generally these are slow moving queues and if there is a
+sync-noidle service tree in each group, that group gets exclusive access to
+disk for certain period. That means it will bring the throughput down if
+group does not have enough IO to drive deeper queue depths and utilize disk
+capacity to the fullest in the slice allocated to it. But the flip side is
+that even a random reader should get better latencies and overall throughput
+if there are lots of sequential readers/sync-idle workload running in the
+system.
+
+If group_isolation=0, then CFQ automatically moves all the random seeky queues
+in the root group. That means there will be no service differentiation for
+that kind of workload. This leads to better throughput as we do collective
+idling on root sync-noidle tree.
+
+By default one should run with group_isolation=0. If that is not sufficient
+and one wants stronger isolation between groups, then set group_isolation=1
+but this will come at cost of reduced throughput.
+
+What works
+==========
+- Currently only sync IO queues are support. All the buffered writes are
+  still system wide and not per group. Hence we will not see service
+  differentiation between buffered writes between groups.
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index e1efc40..e151b2a 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -65,6 +65,7 @@
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
+av_permissions.h
 bbootsect
 bin2c
 binkernel.spec
@@ -95,12 +96,14 @@
 elf2ecoff
 elfconfig.h*
 fixdep
+flask.h
 fore200e_mkfirm
 fore200e_pca_fw.c*
 gconf
 gen-devlist
 gen_crc32table
 gen_init_cpio
+genheaders
 genksyms
 *_gray256.c
 ihex2fw
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt
index b3e3a03..fe79e3c 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -312,10 +312,8 @@
 8. Mailing list
 ---------------
 
-There are several frame buffer device related mailing lists at SourceForge:
-  - linux-fbdev-announce@lists.sourceforge.net, for announcements,
-  - linux-fbdev-user@lists.sourceforge.net, for generic user support,
-  - linux-fbdev-devel@lists.sourceforge.net, for project developers.
+There is a frame buffer device related mailing list at kernel.org:
+linux-fbdev@vger.kernel.org.
 
 Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for
 subscription information and archive browsing.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index bc693ff..591e944 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,6 +6,21 @@
 
 ---------------------------
 
+What:	USER_SCHED
+When:	2.6.34
+
+Why:	USER_SCHED was implemented as a proof of concept for group scheduling.
+	The effect of USER_SCHED can already be achieved from userspace with
+	the help of libcgroup. The removal of USER_SCHED will also simplify
+	the scheduler code with the removal of one major ifdef. There are also
+	issues USER_SCHED has with USER_NS. A decision was taken not to fix
+	those and instead remove USER_SCHED. Also new group scheduling
+	features will not be implemented for USER_SCHED.
+
+Who:	Dhaval Giani <dhaval@linux.vnet.ibm.com>
+
+---------------------------
+
 What:	PRISM54
 When:	2.6.34
 
@@ -302,18 +317,6 @@
 
 ---------------------------
 
-What:	SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
-	SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
-When: 	June 2009
-Why:    A newer version of the options have been introduced in 2005 that
-	removes the limitions of the old API.  The sctp library has been
-        converted to use these new options at the same time.  Any user
-	space app that directly uses the old options should convert to using
-	the new options.
-Who:	Vlad Yasevich <vladislav.yasevich@hp.com>
-
----------------------------
-
 What:	Ability for non root users to shm_get hugetlb pages based on mlock
 	resource limits
 When:	2.6.31
@@ -404,15 +407,6 @@
 
 ---------------------------
 
-What:	i2c-voodoo3 driver
-When:	October 2009
-Why:	Superseded by tdfxfb. I2C/DDC support used to live in a separate
-	driver but this caused driver conflicts.
-Who:	Jean Delvare <khali@linux-fr.org>
-	Krzysztof Helt <krzysztof.h1@wp.pl>
-
----------------------------
-
 What:	CONFIG_RFKILL_INPUT
 When:	2.6.33
 Why:	Should be implemented in userspace, policy daemon.
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
index 9e94b94..a91e2e2 100644
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -235,6 +235,7 @@
 		neg=N	Number of negative lookups made
 		pos=N	Number of positive lookups made
 		crt=N	Number of objects created by lookup
+		tmo=N	Number of lookups timed out and requeued
 	Updates	n=N	Number of update cookie requests seen
 		nul=N	Number of upd reqs given a NULL parent
 		run=N	Number of upd reqs granted CPU time
@@ -250,8 +251,10 @@
 		ok=N	Number of successful alloc reqs
 		wt=N	Number of alloc reqs that waited on lookup completion
 		nbf=N	Number of alloc reqs rejected -ENOBUFS
+		int=N	Number of alloc reqs aborted -ERESTARTSYS
 		ops=N	Number of alloc reqs submitted
 		owt=N	Number of alloc reqs waited for CPU time
+		abt=N	Number of alloc reqs aborted due to object death
 	Retrvls	n=N	Number of retrieval (read) requests seen
 		ok=N	Number of successful retr reqs
 		wt=N	Number of retr reqs that waited on lookup completion
@@ -261,6 +264,7 @@
 		oom=N	Number of retr reqs failed -ENOMEM
 		ops=N	Number of retr reqs submitted
 		owt=N	Number of retr reqs waited for CPU time
+		abt=N	Number of retr reqs aborted due to object death
 	Stores	n=N	Number of storage (write) requests seen
 		ok=N	Number of successful store reqs
 		agn=N	Number of store reqs on a page already pending storage
@@ -268,12 +272,37 @@
 		oom=N	Number of store reqs failed -ENOMEM
 		ops=N	Number of store reqs submitted
 		run=N	Number of store reqs granted CPU time
+		pgs=N	Number of pages given store req processing time
+		rxd=N	Number of store reqs deleted from tracking tree
+		olm=N	Number of store reqs over store limit
+	VmScan	nos=N	Number of release reqs against pages with no pending store
+		gon=N	Number of release reqs against pages stored by time lock granted
+		bsy=N	Number of release reqs ignored due to in-progress store
+		can=N	Number of page stores cancelled due to release req
 	Ops	pend=N	Number of times async ops added to pending queues
 		run=N	Number of times async ops given CPU time
 		enq=N	Number of times async ops queued for processing
+		can=N	Number of async ops cancelled
+		rej=N	Number of async ops rejected due to object lookup/create failure
 		dfr=N	Number of async ops queued for deferred release
 		rel=N	Number of async ops released
 		gc=N	Number of deferred-release async ops garbage collected
+	CacheOp	alo=N	Number of in-progress alloc_object() cache ops
+		luo=N	Number of in-progress lookup_object() cache ops
+		luc=N	Number of in-progress lookup_complete() cache ops
+		gro=N	Number of in-progress grab_object() cache ops
+		upo=N	Number of in-progress update_object() cache ops
+		dro=N	Number of in-progress drop_object() cache ops
+		pto=N	Number of in-progress put_object() cache ops
+		syn=N	Number of in-progress sync_cache() cache ops
+		atc=N	Number of in-progress attr_changed() cache ops
+		rap=N	Number of in-progress read_or_alloc_page() cache ops
+		ras=N	Number of in-progress read_or_alloc_pages() cache ops
+		alp=N	Number of in-progress allocate_page() cache ops
+		als=N	Number of in-progress allocate_pages() cache ops
+		wrp=N	Number of in-progress write_page() cache ops
+		ucp=N	Number of in-progress uncache_page() cache ops
+		dsp=N	Number of in-progress dissociate_pages() cache ops
 
 
  (*) /proc/fs/fscache/histogram
@@ -299,6 +328,87 @@
      jiffy range covered, and the SECS field the equivalent number of seconds.
 
 
+===========
+OBJECT LIST
+===========
+
+If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a
+list of all the objects currently allocated and allow them to be viewed
+through:
+
+	/proc/fs/fscache/objects
+
+This will look something like:
+
+	[root@andromeda ~]# head /proc/fs/fscache/objects
+	OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA       OBJECT_KEY, AUX_DATA
+	======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
+	   17e4b        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+	   1693a        2 ACTV     0   0   0   0  0     0 7b  4 0 8 | NFS.fh           DT  0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+
+where the first set of columns before the '|' describe the object:
+
+	COLUMN	DESCRIPTION
+	=======	===============================================================
+	OBJECT	Object debugging ID (appears as OBJ%x in some debug messages)
+	PARENT	Debugging ID of parent object
+	STAT	Object state
+	CHLDN	Number of child objects of this object
+	OPS	Number of outstanding operations on this object
+	OOP	Number of outstanding child object management operations
+	IPR
+	EX	Number of outstanding exclusive operations
+	READS	Number of outstanding read operations
+	EM	Object's event mask
+	EV	Events raised on this object
+	F	Object flags
+	S	Object slow-work work item flags
+
+and the second set of columns describe the object's cookie, if present:
+
+	COLUMN		DESCRIPTION
+	===============	=======================================================
+	NETFS_COOKIE_DEF Name of netfs cookie definition
+	TY		Cookie type (IX - index, DT - data, hex - special)
+	FL		Cookie flags
+	NETFS_DATA	Netfs private data stored in the cookie
+	OBJECT_KEY	Object key	} 1 column, with separating comma
+	AUX_DATA	Object aux data	} presence may be configured
+
+The data shown may be filtered by attaching the a key to an appropriate keyring
+before viewing the file.  Something like:
+
+		keyctl add user fscache:objlist <restrictions> @s
+
+where <restrictions> are a selection of the following letters:
+
+	K	Show hexdump of object key (don't show if not given)
+	A	Show hexdump of object aux data (don't show if not given)
+
+and the following paired letters:
+
+	C	Show objects that have a cookie
+	c	Show objects that don't have a cookie
+	B	Show objects that are busy
+	b	Show objects that aren't busy
+	W	Show objects that have pending writes
+	w	Show objects that don't have pending writes
+	R	Show objects that have outstanding reads
+	r	Show objects that don't have outstanding reads
+	S	Show objects that have slow work queued
+	s	Show objects that don't have slow work queued
+
+If neither side of a letter pair is given, then both are implied.  For example:
+
+	keyctl add user fscache:objlist KB @s
+
+shows objects that are busy, and lists their object keys, but does not dump
+their auxiliary data.  It also implies "CcWwRrSs", but as 'B' is given, 'b' is
+not implied.
+
+By default all objects and all fields will be shown.
+
+
 =========
 DEBUGGING
 =========
diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt
index 2666b1e..1902c57 100644
--- a/Documentation/filesystems/caching/netfs-api.txt
+++ b/Documentation/filesystems/caching/netfs-api.txt
@@ -641,7 +641,7 @@
 
 Furthermore, note that this does not cancel the asynchronous read or write
 operation started by the read/alloc and write functions, so the page
-invalidation and release functions must use:
+invalidation functions must use:
 
 	bool fscache_check_page_write(struct fscache_cookie *cookie,
 				      struct page *page);
@@ -654,6 +654,25 @@
 to wait for it to finish if it is.
 
 
+When releasepage() is being implemented, a special FS-Cache function exists to
+manage the heuristics of coping with vmscan trying to eject pages, which may
+conflict with the cache trying to write pages to the cache (which may itself
+need to allocate memory):
+
+	bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+					struct page *page,
+					gfp_t gfp);
+
+This takes the netfs cookie, and the page and gfp arguments as supplied to
+releasepage().  It will return false if the page cannot be released yet for
+some reason and if it returns true, the page has been uncached and can now be
+released.
+
+To make a page available for release, this function may wait for an outstanding
+storage request to complete, or it may attempt to cancel the storage request -
+in which case the page will not be stored in the cache this time.
+
+
 ==========================
 INDEX AND DATA FILE UPDATE
 ==========================
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 2c48f94..4af0018 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1072,7 +1072,8 @@
 - irq: servicing interrupts
 - softirq: servicing softirqs
 - steal: involuntary wait
-- guest: running a guest
+- guest: running a normal guest
+- guest_nice: running a niced guest
 
 The "intr" line gives counts of interrupts  serviced since boot time, for each
 of the  possible system interrupts.   The first  column  is the  total of  all
diff --git a/Documentation/i2c/busses/i2c-voodoo3 b/Documentation/i2c/busses/i2c-voodoo3
deleted file mode 100644
index 62d90a4..0000000
--- a/Documentation/i2c/busses/i2c-voodoo3
+++ /dev/null
@@ -1,62 +0,0 @@
-Kernel driver i2c-voodoo3
-
-Supported adapters:
-  * 3dfx Voodoo3 based cards
-  * Voodoo Banshee based cards
-
-Authors: 
-	Frodo Looijaard <frodol@dds.nl>, 
-	Philip Edelbrock <phil@netroedge.com>, 
-	Ralph Metzler <rjkm@thp.uni-koeln.de>,
-	Mark D. Studebaker <mdsxyz123@yahoo.com>
-
-Main contact: Philip Edelbrock <phil@netroedge.com>
-	
-The code is based upon Ralph's test code (he did the hard stuff ;')
-
-Description
------------
-
-The 3dfx Voodoo3 chip contains two I2C interfaces (aka a I2C 'master' or
-'host'). 
-
-The first interface is used for DDC (Data Display Channel) which is a
-serial channel through the VGA monitor connector to a DDC-compliant
-monitor. This interface is defined by the Video Electronics Standards
-Association (VESA). The standards are available for purchase at
-http://www.vesa.org .
-
-The second interface is a general-purpose I2C bus. The intent by 3dfx was
-to allow manufacturers to add extra chips to the video card such as a
-TV-out chip such as the BT869 or possibly even I2C based temperature
-sensors like the ADM1021 or LM75.
-
-Stability
----------
-
-Seems to be stable on the test machine, but needs more testing on other
-machines. Simultaneous accesses of the DDC and I2C busses may cause errors.
-
-Supported Devices
------------------
-
-Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
-3000' which has a tv-out feature (s-video or composite).  According to the
-docs and discussions, this code should work for any Voodoo3 based cards as
-well as Voodoo Banshee based cards.  The DDC interface has been tested on a
-Voodoo Banshee card.
-	
-Issues
-------
-
-Probably many, but it seems to work OK on my system. :')
-
-
-External Device Connection
---------------------------
-
-The digital video input jumpers give availability to the I2C bus. 
-Specifically, pins 13 and 25 (bottom row middle, and bottom right-end) are     
-the I2C clock and I2C data lines, respectively. +5V and GND are probably
-also easily available making the addition of extra I2C/SMBus devices easy
-to implement.
diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub
index 0d8be1c..fa4b669 100644
--- a/Documentation/i2c/i2c-stub
+++ b/Documentation/i2c/i2c-stub
@@ -2,9 +2,9 @@
 
 DESCRIPTION:
 
-This module is a very simple fake I2C/SMBus driver.  It implements four
-types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, and
-(r/w) word data.
+This module is a very simple fake I2C/SMBus driver.  It implements five
+types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, (r/w)
+word data, and (r/w) I2C block data.
 
 You need to provide chip addresses as a module parameter when loading this
 driver, which will then only react to SMBus commands to these addresses.
@@ -21,8 +21,8 @@
 
 The typical use-case is like this:
 	1. load this module
-	2. use i2cset (from lm_sensors project) to pre-load some data
-	3. load the target sensors chip driver module
+	2. use i2cset (from the i2c-tools project) to pre-load some data
+	3. load the target chip driver module
 	4. observe its behavior in the kernel log
 
 There's a script named i2c-stub-from-dump in the i2c-tools package which
@@ -33,6 +33,12 @@
 int chip_addr[10]:
 	The SMBus addresses to emulate chips at.
 
+unsigned long functionality:
+	Functionality override, to disable some commands. See I2C_FUNC_*
+	constants in <linux/i2c.h> for the suitable values. For example,
+	value 0x1f0000 would only enable the quick, byte and byte data
+	commands.
+
 CAVEATS:
 
 If your target driver polls some byte or word waiting for it to change, the
diff --git a/Documentation/i2c/old-module-parameters b/Documentation/i2c/old-module-parameters
new file mode 100644
index 0000000..8e2b629
--- /dev/null
+++ b/Documentation/i2c/old-module-parameters
@@ -0,0 +1,44 @@
+I2C device driver binding control from user-space
+=================================================
+
+Up to kernel 2.6.32, many i2c drivers used helper macros provided by
+<linux/i2c.h> which created standard module parameters to let the user
+control how the driver would probe i2c buses and attach to devices. These
+parameters were known as "probe" (to let the driver probe for an extra
+address), "force" (to forcibly attach the driver to a given device) and
+"ignore" (to prevent a driver from probing a given address).
+
+With the conversion of the i2c subsystem to the standard device driver
+binding model, it became clear that these per-module parameters were no
+longer needed, and that a centralized implementation was possible. The new,
+sysfs-based interface is described in the documentation file
+"instantiating-devices", section "Method 4: Instantiate from user-space".
+
+Below is a mapping from the old module parameters to the new interface.
+
+Attaching a driver to an I2C device
+-----------------------------------
+
+Old method (module parameters):
+# modprobe <driver> probe=1,0x2d
+# modprobe <driver> force=1,0x2d
+# modprobe <driver> force_<device>=1,0x2d
+
+New method (sysfs interface):
+# echo <device> 0x2d > /sys/bus/i2c/devices/i2c-1/new_device
+
+Preventing a driver from attaching to an I2C device
+---------------------------------------------------
+
+Old method (module parameters):
+# modprobe <driver> ignore=1,0x2f
+
+New method (sysfs interface):
+# echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device
+# modprobe <driver>
+
+Of course, it is important to instantiate the "dummy" device before loading
+the driver. The dummy device will be handled by i2c-core itself, preventing
+other drivers from binding to it later on. If there is a real device at the
+problematic address, and you want another driver to bind to it, then simply
+pass the name of the device in question instead of "dummy".
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index f996310..0fc9831 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -5,7 +5,7 @@
      ------------
 1.1. Hardware
      --------
-     This release supports the connection of the Gigaset 307x/417x family of
+     This driver supports the connection of the Gigaset 307x/417x family of
      ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
      connection. The following devices are reported to be compatible:
 
@@ -33,7 +33,7 @@
               http://gigaset307x.sourceforge.net/
 
      We had also reports from users of Gigaset M105 who could use the drivers
-     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.4.)
+     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.)
      If you have another device that works with our driver, please let us know.
 
      Chances of getting an USB device to work are good if the output of
@@ -49,7 +49,7 @@
      --------
      The driver works with ISDN4linux and so can be used with any software
      which is able to use ISDN4linux for ISDN connections (voice or data).
-     CAPI4Linux support is planned but not yet available.
+     Experimental Kernel CAPI support is available as a compilation option.
 
      There are some user space tools available at
      http://sourceforge.net/projects/gigaset307x/
@@ -102,20 +102,28 @@
 2.3. ISDN4linux
      ----------
      This is the "normal" mode of operation. After loading the module you can
-     set up the ISDN system just as you'd do with any ISDN card.
-     Your distribution should provide some configuration utility.
-     If not, you can use some HOWTOs like
+     set up the ISDN system just as you'd do with any ISDN card supported by
+     the ISDN4Linux subsystem. Most distributions provide some configuration
+     utility. If not, you can use some HOWTOs like
          http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-     If this doesn't work, because you have some recent device like SX100 where
+     If this doesn't work, because you have some device like SX100 where
      debug output (see section 3.2.) shows something like this when dialing
          CMD Received: ERROR
          Available Params: 0
          Connection State: 0, Response: -1
          gigaset_process_response: resp_code -1 in ConState 0 !
          Timeout occurred
-     you might need to use unimodem mode:
+     you might need to use unimodem mode. (see section 2.5.)
 
-2.4. Unimodem mode
+2.4. CAPI
+     ----
+     If the driver is compiled with CAPI support (kernel configuration option
+     GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
+     user space applications.  ISDN4Linux is supported in this configuration
+     via the capidrv compatibility driver. The kernel module capidrv.ko must
+     be loaded explicitly ("modprobe capidrv") if needed.
+
+2.5. Unimodem mode
      -------------
      This is needed for some devices [e.g. SX100] as they have problems with
      the "normal" commands.
@@ -160,7 +168,7 @@
      configuration file like /etc/modprobe.conf.local,
      using that should be preferred.
 
-2.5. Call-ID (CID) mode
+2.6. Call-ID (CID) mode
      ------------------
      Call-IDs are numbers used to tag commands to, and responses from, the
      Gigaset base in order to support the simultaneous handling of multiple
@@ -188,7 +196,7 @@
      You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
      setting (ttyGxy is ttyGU0 or ttyGB0).
 
-2.6. Unregistered Wireless Devices (M101/M105)
+2.7. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
      The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
      the M101 and M105 wireless devices to be used as ISDN devices for ISDN
@@ -228,7 +236,7 @@
         You have two or more DECT data adapters (M101/M105) and only the
         first one you turn on works.
      Solution:
-        Select Unimodem mode for all DECT data adapters. (see section 2.4.)
+        Select Unimodem mode for all DECT data adapters. (see section 2.5.)
 
      Problem:
 	Messages like this:
@@ -236,7 +244,7 @@
 	appear in your syslog.
      Solution:
 	Check whether your M10x wireless device is correctly registered to the
-	Gigaset base. (see section 2.6.)
+	Gigaset base. (see section 2.7.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 9107b38..777dc8a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -85,7 +85,6 @@
 	PPT	Parallel port support is enabled.
 	PS2	Appropriate PS/2 support is enabled.
 	RAM	RAM disk support is enabled.
-	ROOTPLUG The example Root Plug LSM is enabled.
 	S390	S390 architecture is enabled.
 	SCSI	Appropriate SCSI support is enabled.
 			A lot of drivers has their options described inside of
@@ -345,6 +344,15 @@
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
 
+	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
+			Limit apic dumping. The parameter defines the maximal
+			number of local apics being dumped. Also it is possible
+			to set it to "all" by meaning -- no limit here.
+			Format: { 1 (default) | 2 | ... | all }.
+			The parameter valid if only apic=debug or
+			apic=verbose is specified.
+			Example: apic=debug show_lapic=all
+
 	apm=		[APM] Advanced Power Management
 			See header of arch/x86/kernel/apm_32.c.
 
@@ -779,6 +787,13 @@
 			by the set_ftrace_notrace file in the debugfs
 			tracing directory.
 
+	ftrace_graph_filter=[function-list]
+			[FTRACE] Limit the top level callers functions traced
+			by the function graph tracer at boot up.
+			function-list is a comma separated list of functions
+			that can be changed at run time by the
+			set_graph_function file in the debugfs tracing directory.
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)
@@ -2032,8 +2047,15 @@
 
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
-			print-fatal-signals=1: print segfault info to
-			the kernel console.
+
+			If enabled, warn about various signal handling
+			related application anomalies: too many signals,
+			too many POSIX.1 timers, fatal signals causing a
+			coredump - etc.
+
+			If you hit the warning due to signal overflow,
+			you might want to try "ulimit -i unlimited".
+
 			default: off.
 
 	printk.time=	Show timing data prefixed to each printk message line
@@ -2164,15 +2186,6 @@
 			Useful for devices that are detected asynchronously
 			(e.g. USB and MMC devices).
 
-	root_plug.vendor_id=
-			[ROOTPLUG] Override the default vendor ID
-
-	root_plug.product_id=
-			[ROOTPLUG] Override the default product ID
-
-	root_plug.debug=
-			[ROOTPLUG] Enable debugging output
-
 	rw		[KNL] Mount root device read-write on boot
 
 	S		[KNL] Run init in single mode
@@ -2182,6 +2195,8 @@
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
 
+	sched_debug	[KNL] Enables verbose scheduler debug messages.
+
 	sc1200wdt=	[HW,WDT] SC1200 WDT (watchdog) driver
 			Format: <io>[,<timeout>[,<isapnp>]]
 
@@ -2590,6 +2605,9 @@
 	uart6850=	[HW,OSS]
 			Format: <io>,<irq>
 
+	uhash_entries=	[KNL,NET]
+			Set number of hash buckets for UDP/UDP-Lite connections
+
 	uhci-hcd.ignore_oc=
 			[USB] Ignore overcurrent events (default N).
 			Some badly-designed motherboards generate lots of
@@ -2729,6 +2747,15 @@
 			Default is 1, i.e. UTF-8 mode is enabled for all
 			newly opened terminals.
 
+	vt.global_cursor_default=
+			[VT]
+			Format=<-1|0|1>
+			Set system-wide default for whether a cursor
+			is shown on new VTs. Default is -1,
+			i.e. cursors will be created by default unless
+			overridden by individual drivers. 0 will hide
+			cursors, 1 will display them.
+
 	waveartist=	[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index 5a4bc8cf..e1a1141 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -593,6 +593,115 @@
 	} chip;
 };
 
+4.27 KVM_XEN_HVM_CONFIG
+
+Capability: KVM_CAP_XEN_HVM
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_xen_hvm_config (in)
+Returns: 0 on success, -1 on error
+
+Sets the MSR that the Xen HVM guest uses to initialize its hypercall
+page, and provides the starting address and size of the hypercall
+blobs in userspace.  When the guest writes the MSR, kvm copies one
+page of a blob (32- or 64-bit, depending on the vcpu mode) to guest
+memory.
+
+struct kvm_xen_hvm_config {
+	__u32 flags;
+	__u32 msr;
+	__u64 blob_addr_32;
+	__u64 blob_addr_64;
+	__u8 blob_size_32;
+	__u8 blob_size_64;
+	__u8 pad2[30];
+};
+
+4.27 KVM_GET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (out)
+Returns: 0 on success, -1 on error
+
+Gets the current timestamp of kvmclock as seen by the current guest. In
+conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+	__u64 clock;  /* kvmclock current value */
+	__u32 flags;
+	__u32 pad[9];
+};
+
+4.28 KVM_SET_CLOCK
+
+Capability: KVM_CAP_ADJUST_CLOCK
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_clock_data (in)
+Returns: 0 on success, -1 on error
+
+Sets the current timestamp of kvmclock to the valued specific in its parameter.
+In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
+such as migration.
+
+struct kvm_clock_data {
+	__u64 clock;  /* kvmclock current value */
+	__u32 flags;
+	__u32 pad[9];
+};
+
+4.29 KVM_GET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (out)
+Returns: 0 on success, -1 on error
+
+Gets currently pending exceptions, interrupts, and NMIs as well as related
+states of the vcpu.
+
+struct kvm_vcpu_events {
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 has_error_code;
+		__u8 pad;
+		__u32 error_code;
+	} exception;
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 soft;
+		__u8 pad;
+	} interrupt;
+	struct {
+		__u8 injected;
+		__u8 pending;
+		__u8 masked;
+		__u8 pad;
+	} nmi;
+	__u32 sipi_vector;
+	__u32 flags;   /* must be zero */
+};
+
+4.30 KVM_SET_VCPU_EVENTS
+
+Capability: KVM_CAP_VCPU_EVENTS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_vcpu_event (in)
+Returns: 0 on success, -1 on error
+
+Set pending exceptions, interrupts, and NMIs as well as related states of the
+vcpu.
+
+See KVM_GET_VCPU_EVENTS for the data structure.
+
+
 5. The kvm_run structure
 
 Application code obtains a pointer to the kvm_run structure by
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index d5181ce..61f516b 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 12 November 2007
+		Latest update: 23 September 2009
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -614,6 +614,46 @@
 
 	The primary option is only valid for active-backup mode.
 
+primary_reselect
+
+	Specifies the reselection policy for the primary slave.  This
+	affects how the primary slave is chosen to become the active slave
+	when failure of the active slave or recovery of the primary slave
+	occurs.  This option is designed to prevent flip-flopping between
+	the primary slave and other slaves.  Possible values are:
+
+	always or 0 (default)
+
+		The primary slave becomes the active slave whenever it
+		comes back up.
+
+	better or 1
+
+		The primary slave becomes the active slave when it comes
+		back up, if the speed and duplex of the primary slave is
+		better than the speed and duplex of the current active
+		slave.
+
+	failure or 2
+
+		The primary slave becomes the active slave only if the
+		current active slave fails and the primary slave is up.
+
+	The primary_reselect setting is ignored in two cases:
+
+		If no slaves are active, the first slave to recover is
+		made the active slave.
+
+		When initially enslaved, the primary slave is always made
+		the active slave.
+
+	Changing the primary_reselect policy via sysfs will cause an
+	immediate selection of the best active slave according to the new
+	policy.  This may or may not result in a change of the active
+	slave, depending upon the circumstances.
+
+	This option was added for bonding version 3.6.0.
+
 updelay
 
 	Specifies the time, in milliseconds, to wait before enabling a
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index fbe427a..006b39d 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -164,6 +164,14 @@
 	additional choices may be available based on kernel configuration.
 	Default is set as part of kernel configuration.
 
+tcp_cookie_size - INTEGER
+	Default size of TCP Cookie Transactions (TCPCT) option, that may be
+	overridden on a per socket basis by the TCPCT socket option.
+	Values greater than the maximum (16) are interpreted as the maximum.
+	Values greater than zero and less than the minimum (8) are interpreted
+	as the minimum.  Odd values are interpreted as the next even value.
+	Default: 0 (off).
+
 tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
@@ -723,6 +731,12 @@
 	default TRUE (router)
 		FALSE (host)
 
+accept_local - BOOLEAN
+	Accept packets with local source addresses. In combination with
+	suitable routing, this can be used to direct packets between two
+	local interfaces over the wire and have them accepted properly.
+	default FALSE
+
 rp_filter - INTEGER
 	0 - No source validation.
 	1 - Strict mode as defined in RFC3704 Strict Reverse Path
@@ -738,8 +752,8 @@
 	to prevent IP spoofing from DDos attacks. If using asymmetric routing
 	or other complicated routing, then loose mode is recommended.
 
-	conf/all/rp_filter must also be set to non-zero to do source validation
-	on the interface
+	The max value from conf/{all,interface}/rp_filter is used
+	when doing source validation on the {interface}.
 
 	Default value is 0. Note that some distributions enable it
 	in startup scripts.
@@ -1086,6 +1100,24 @@
 	2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
 	   link-local address has been found.
 
+force_tllao - BOOLEAN
+	Enable sending the target link-layer address option even when
+	responding to a unicast neighbor solicitation.
+	Default: FALSE
+
+	Quoting from RFC 2461, section 4.4, Target link-layer address:
+
+	"The option MUST be included for multicast solicitations in order to
+	avoid infinite Neighbor Solicitation "recursion" when the peer node
+	does not have a cache entry to return a Neighbor Advertisements
+	message.  When responding to unicast solicitations, the option can be
+	omitted since the sender of the solicitation has the correct link-
+	layer address; otherwise it would not have be able to send the unicast
+	solicitation in the first place. However, including the link-layer
+	address in this case adds little overhead and eliminates a potential
+	race condition where the sender deletes the cached link-layer address
+	prior to receiving a response to a previous solicitation."
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 0599343..446f43b 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,5 +1,17 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
+   Instead of the cs_error() callback or the CS_CHECK() macro, please use
+   Linux-style checking of return values, and -- if necessary -- debug
+   messages using "dev_dbg()" or "pr_debug()".
+
+* New CIS tuple access (as of 2.6.33)
+   Instead of pcmcia_get_{first,next}_tuple(), pcmcia_get_tuple_data() and
+   pcmcia_parse_tuple(), a driver shall use "pcmcia_get_tuple()" if it is
+   only interested in one (raw) tuple, or "pcmcia_loop_tuple()" if it is
+   interested in all tuples of one type. To decode the MAC from CISTPL_FUNCE,
+   a new helper "pcmcia_get_mac_from_cis()" was added.
+
 * New configuration loop helper (as of 2.6.28)
    By calling pcmcia_loop_config(), a driver can iterate over all available
    configuration options. During a driver's probe() phase, one doesn't need
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index f49a33b..4a3109b 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -38,7 +38,7 @@
 	...
 	int (*runtime_suspend)(struct device *dev);
 	int (*runtime_resume)(struct device *dev);
-	void (*runtime_idle)(struct device *dev);
+	int (*runtime_idle)(struct device *dev);
 	...
 };
 
@@ -71,9 +71,9 @@
     purpose).
 
 In particular, if the driver requires remote wakeup capability for proper
-functioning and device_may_wakeup() returns 'false' for the device, then
+functioning and device_run_wake() returns 'false' for the device, then
 ->runtime_suspend() should return -EBUSY.  On the other hand, if
-device_may_wakeup() returns 'true' for the device and the device is put
+device_run_wake() returns 'true' for the device and the device is put
 into a low power state during the execution of its bus type's
 ->runtime_suspend(), it is expected that remote wake-up (i.e. hardware mechanism
 allowing the device to request a change of its power state, such as PCI PME)
@@ -114,7 +114,8 @@
 dependent on the bus type in question, but the expected and recommended action
 is to check if the device can be suspended (i.e. if all of the conditions
 necessary for suspending the device are satisfied) and to queue up a suspend
-request for the device in that case.
+request for the device in that case.  The value returned by this callback is
+ignored by the PM core.
 
 The helper functions provided by the PM core, described in Section 4, guarantee
 that the following constraints are met with respect to the bus type's run-time
@@ -214,6 +215,9 @@
       being executed for that device and it is not practical to wait for the
       suspend to complete; means "start a resume as soon as you've suspended"
 
+  unsigned int run_wake;
+    - set if the device is capable of generating run-time wake-up events
+
   enum rpm_status runtime_status;
     - the run-time PM status of the device; this field's initial value is
       RPM_SUSPENDED, which means that each device is initially regarded by the
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index ddd5ee3..5c6602d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -193,3 +193,13 @@
 	external irq3:	interrupts = <1 3 n>;
 'n' is sense (0: level high, 1: edge rising, 2: edge falling 3: level low)
 
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properites, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source- a string describing the clock source. Valid values
+			  are:	"ip" for ip bus clock
+				"ref" for reference clock (XTAL)
+			  "ref" is default in case this property is not
+			  present.
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
index ebc50f8..9dbf4470c 100644
--- a/Documentation/slow-work.txt
+++ b/Documentation/slow-work.txt
@@ -41,6 +41,13 @@
 Operations of both types may sleep during execution, thus tying up the thread
 loaned to it.
 
+A further class of work item is available, based on the slow work item class:
+
+ (*) Delayed slow work items.
+
+These are slow work items that have a timer to defer queueing of the item for
+a while.
+
 
 THREAD-TO-CLASS ALLOCATION
 --------------------------
@@ -64,9 +71,11 @@
 Firstly, a module or subsystem wanting to make use of slow work items must
 register its interest:
 
-	 int ret = slow_work_register_user();
+	 int ret = slow_work_register_user(struct module *module);
 
-This will return 0 if successful, or a -ve error upon failure.
+This will return 0 if successful, or a -ve error upon failure.  The module
+pointer should be the module interested in using this facility (almost
+certainly THIS_MODULE).
 
 
 Slow work items may then be set up by:
@@ -93,6 +102,10 @@
 
      or:
 
+	delayed_slow_work_init(&myitem, &myitem_ops);
+
+     or:
+
 	vslow_work_init(&myitem, &myitem_ops);
 
      depending on its class.
@@ -102,15 +115,92 @@
 	int ret = slow_work_enqueue(&myitem);
 
 This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise.
+on the item, 0 otherwise, or (for delayed work):
+
+	int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
 
 
 The items are reference counted, so there ought to be no need for a flush
-operation.  When all a module's slow work items have been processed, and the
+operation.  But as the reference counting is optional, means to cancel
+existing work items are also included:
+
+	cancel_slow_work(&myitem);
+	cancel_delayed_slow_work(&myitem);
+
+can be used to cancel pending work.  The above cancel function waits for
+existing work to have been executed (or prevent execution of them, depending
+on timing).
+
+
+When all a module's slow work items have been processed, and the
 module has no further interest in the facility, it should unregister its
 interest:
 
-	slow_work_unregister_user();
+	slow_work_unregister_user(struct module *module);
+
+The module pointer is used to wait for all outstanding work items for that
+module before completing the unregistration.  This prevents the put_ref() code
+from being taken away before it completes.  module should almost certainly be
+THIS_MODULE.
+
+
+================
+HELPER FUNCTIONS
+================
+
+The slow-work facility provides a function by which it can be determined
+whether or not an item is queued for later execution:
+
+	bool queued = slow_work_is_queued(struct slow_work *work);
+
+If it returns false, then the item is not on the queue (it may be executing
+with a requeue pending).  This can be used to work out whether an item on which
+another depends is on the queue, thus allowing a dependent item to be queued
+after it.
+
+If the above shows an item on which another depends not to be queued, then the
+owner of the dependent item might need to wait.  However, to avoid locking up
+the threads unnecessarily be sleeping in them, it can make sense under some
+circumstances to return the work item to the queue, thus deferring it until
+some other items have had a chance to make use of the yielded thread.
+
+To yield a thread and defer an item, the work function should simply enqueue
+the work item again and return.  However, this doesn't work if there's nothing
+actually on the queue, as the thread just vacated will jump straight back into
+the item's work function, thus busy waiting on a CPU.
+
+Instead, the item should use the thread to wait for the dependency to go away,
+but rather than using schedule() or schedule_timeout() to sleep, it should use
+the following function:
+
+	bool requeue = slow_work_sleep_till_thread_needed(
+			struct slow_work *work,
+			signed long *_timeout);
+
+This will add a second wait and then sleep, such that it will be woken up if
+either something appears on the queue that could usefully make use of the
+thread - and behind which this item can be queued, or if the event the caller
+set up to wait for happens.  True will be returned if something else appeared
+on the queue and this work function should perhaps return, of false if
+something else woke it up.  The timeout is as for schedule_timeout().
+
+For example:
+
+	wq = bit_waitqueue(&my_flags, MY_BIT);
+	init_wait(&wait);
+	requeue = false;
+	do {
+		prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+		if (!test_bit(MY_BIT, &my_flags))
+			break;
+		requeue = slow_work_sleep_till_thread_needed(&my_work,
+							     &timeout);
+	} while (timeout > 0 && !requeue);
+	finish_wait(wq, &wait);
+	if (!test_bit(MY_BIT, &my_flags)
+		goto do_my_thing;
+	if (requeue)
+		return; // to slow_work
 
 
 ===============
@@ -118,7 +208,8 @@
 ===============
 
 Each work item requires a table of operations of type struct slow_work_ops.
-All members are required:
+Only ->execute() is required; the getting and putting of a reference and the
+describing of an item are all optional.
 
  (*) Get a reference on an item:
 
@@ -148,6 +239,16 @@
      This should perform the work required of the item.  It may sleep, it may
      perform disk I/O and it may wait for locks.
 
+ (*) View an item through /proc:
+
+	void (*desc)(struct slow_work *work, struct seq_file *m);
+
+     If supplied, this should print to 'm' a small string describing the work
+     the item is to do.  This should be no more than about 40 characters, and
+     shouldn't include a newline character.
+
+     See the 'Viewing executing and queued items' section below.
+
 
 ==================
 POOL CONFIGURATION
@@ -172,3 +273,50 @@
      is bounded to between 1 and one fewer than the number of active threads.
      This ensures there is always at least one thread that can process very
      slow work items, and always at least one thread that won't.
+
+
+==================================
+VIEWING EXECUTING AND QUEUED ITEMS
+==================================
+
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
+
+	/sys/kernel/debug/slow_work/runqueue
+
+through which the list of work items being executed and the queues of items to
+be executed may be viewed.  The owner of a work item is given the chance to
+add some information of its own.
+
+The contents look something like the following:
+
+    THR PID   ITEM ADDR        FL MARK  DESC
+    === ===== ================ == ===== ==========
+      0  3005 ffff880023f52348  a 952ms FSC: OBJ17d3: LOOK
+      1  3006 ffff880024e33668  2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
+      2  3165 ffff8800296dd180  a 424ms FSC: OBJ17e4: LOOK
+      3  4089 ffff8800262c8d78  a 212ms FSC: OBJ17ea: CRTN
+      4  4090 ffff88002792bed8  2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
+      5  4092 ffff88002a0ef308  2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
+      6  4094 ffff88002abaf4b8  2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
+      7  4095 ffff88002bb188e0  a 388ms FSC: OBJ17e9: CRTN
+    vsq     - ffff880023d99668  1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
+    vsq     - ffff8800295d1740  1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
+    vsq     - ffff880025ba3308  1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
+    vsq     - ffff880024ec83e0  1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
+    vsq     - ffff880026618e00  1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
+    vsq     - ffff880025a2a4b8  1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
+    vsq     - ffff880023cbe6d8  9 212ms FSC: OBJ17eb: LOOK
+    vsq     - ffff880024d37590  9 212ms FSC: OBJ17ec: LOOK
+    vsq     - ffff880027746cb0  9 212ms FSC: OBJ17ed: LOOK
+    vsq     - ffff880024d37ae8  9 212ms FSC: OBJ17ee: LOOK
+    vsq     - ffff880024d37cb0  9 212ms FSC: OBJ17ef: LOOK
+    vsq     - ffff880025036550  9 212ms FSC: OBJ17f0: LOOK
+    vsq     - ffff8800250368e0  9 212ms FSC: OBJ17f1: LOOK
+    vsq     - ffff880025036aa8  9 212ms FSC: OBJ17f2: LOOK
+
+In the 'THR' column, executing items show the thread they're occupying and
+queued threads indicate which queue they're on.  'PID' shows the process ID of
+a slow-work thread that's executing something.  'FL' shows the work item flags.
+'MARK' indicates how long since an item was queued or began executing.  Lastly,
+the 'DESC' column permits the owner of an item to give some information.
+
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index fd9a2f6..8923597 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -798,6 +798,9 @@
     		setup before initializing the codecs.  This option is
 		available only when CONFIG_SND_HDA_PATCH_LOADER=y is set.
 		See HD-Audio.txt for details.
+    beep_mode	- Selects the beep registration mode (0=off, 1=on, 2=
+		dynamic registration via mute switch on/off); the default
+		value is set via CONFIG_SND_HDA_INPUT_BEEP_MODE kconfig.
     
     [Single (global) options]
     single_cmd  - Use single immediate commands to communicate with
@@ -1454,6 +1457,7 @@
 
     Module for internal PC-Speaker.
 
+    nopcm	- Disable PC-Speaker PCM sound. Only beeps remain.
     nforce_wa	- enable NForce chipset workaround. Expect bad sound.
 
     This module supports system beeps, some kind of PCM playback and
@@ -1631,7 +1635,7 @@
   Module snd-sscape
   -----------------
 
-    Module for ENSONIQ SoundScape PnP cards.
+    Module for ENSONIQ SoundScape cards.
 
     port	- Port # (PnP setup)
     wss_port	- WSS Port # (PnP setup)
@@ -1639,10 +1643,11 @@
     mpu_irq	- MPU-401 IRQ # (PnP setup)
     dma		- DMA # (PnP setup)
     dma2	- 2nd DMA # (PnP setup, -1 to disable)
+    joystick	- Enable gameport - 0 = disable (default), 1 = enable
 
-    This module supports multiple cards.  ISA PnP must be enabled.
-    You need sscape_ctl tool in alsa-tools package for loading
-    the microcode.
+    This module supports multiple cards.
+
+    The driver requires the firmware loader support on kernel.
 
   Module snd-sun-amd7930 (on sparc only)
   --------------------------------------
diff --git a/Documentation/sound/alsa/ControlNames.txt b/Documentation/sound/alsa/ControlNames.txt
index 5b18298..fea65bb 100644
--- a/Documentation/sound/alsa/ControlNames.txt
+++ b/Documentation/sound/alsa/ControlNames.txt
@@ -18,8 +18,9 @@
   Master
   Master Mono
   Hardware Master
+  Speaker	(internal speaker)
   Headphone
-  PC Speaker
+  Beep		(beep generator)
   Phone
   Phone Input
   Phone Output
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 4c7f9ae..9000cd8 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -391,6 +391,7 @@
   ref		Reference board
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
+  hp		HP laptops with (inverted) mute-LED
   auto		BIOS setup (default)
 
 STAC9872
diff --git a/Documentation/sysctl/ctl_unnumbered.txt b/Documentation/sysctl/ctl_unnumbered.txt
deleted file mode 100644
index 23003a8e..0000000
--- a/Documentation/sysctl/ctl_unnumbered.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-
-Except for a few extremely rare exceptions user space applications do not use
-the binary sysctl interface.  Instead everyone uses /proc/sys/...  with
-readable ascii names.
-
-Recently the kernel has started supporting setting the binary sysctl value to
-CTL_UNNUMBERED so we no longer need to assign a binary sysctl path to allow
-sysctls to show up in /proc/sys.
-
-Assigning binary sysctl numbers is an endless source of conflicts in sysctl.h,
-breaking of the user space ABI (because of those conflicts), and maintenance
-problems.  A complete pass through all of the sysctl users revealed multiple
-instances where the sysctl binary interface was broken and had gone undetected
-for years.
-
-So please do not add new binary sysctl numbers.  They are unneeded and
-problematic.
-
-If you really need a new binary sysctl number please first merge your sysctl
-into the kernel and then as a separate patch allocate a binary sysctl number.
-
-(ebiederm@xmission.com, June 2007)
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index 7003e10..641a1ef 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -213,10 +213,19 @@
 <details to be filled>
 
 
-HAVE_FTRACE_SYSCALLS
+HAVE_SYSCALL_TRACEPOINTS
 ---------------------
 
-<details to be filled>
+You need very few things to get the syscalls tracing in an arch.
+
+- Have a NR_syscalls variable in <asm/unistd.h> that provides the number
+  of syscalls supported by the arch.
+- Implement arch_syscall_addr() that resolves a syscall address from a
+  syscall number.
+- Support the TIF_SYSCALL_TRACEPOINT thread flags
+- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
+  in the ptrace syscalls tracing path.
+- Tag this arch as HAVE_SYSCALL_TRACEPOINTS.
 
 
 HAVE_FTRACE_MCOUNT_RECORD
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
new file mode 100644
index 0000000..47aabee
--- /dev/null
+++ b/Documentation/trace/kprobetrace.txt
@@ -0,0 +1,149 @@
+                        Kprobe-based Event Tracing
+                        ==========================
+
+                 Documentation is written by Masami Hiramatsu
+
+
+Overview
+--------
+These events are similar to tracepoint based events. Instead of Tracepoint,
+this is based on kprobes (kprobe and kretprobe). So it can probe wherever
+kprobes can probe (this means, all functions body except for __kprobes
+functions). Unlike the Tracepoint based event, this can be added and removed
+dynamically, on the fly.
+
+To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y.
+
+Similar to the events tracer, this doesn't need to be activated via
+current_tracer. Instead of that, add probe points via
+/sys/kernel/debug/tracing/kprobe_events, and enable it via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/enabled.
+
+
+Synopsis of kprobe_events
+-------------------------
+  p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS]	: Set a probe
+  r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS]		: Set a return probe
+
+ GRP		: Group name. If omitted, use "kprobes" for it.
+ EVENT		: Event name. If omitted, the event name is generated
+		  based on SYMBOL+offs or MEMADDR.
+ SYMBOL[+offs]	: Symbol+offset where the probe is inserted.
+ MEMADDR	: Address where the probe is inserted.
+
+ FETCHARGS	: Arguments. Each probe can have up to 128 args.
+  %REG		: Fetch register REG
+  @ADDR		: Fetch memory at ADDR (ADDR should be in kernel)
+  @SYM[+|-offs]	: Fetch memory at SYM +|- offs (SYM should be a data symbol)
+  $stackN	: Fetch Nth entry of stack (N >= 0)
+  $stack	: Fetch stack address.
+  $argN		: Fetch function argument. (N >= 0)(*)
+  $retval	: Fetch return value.(**)
+  +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(***)
+  NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+
+  (*) aN may not correct on asmlinkaged functions and at the middle of
+      function body.
+  (**) only for return probe.
+  (***) this is useful for fetching a field of data structures.
+
+
+Per-Probe Event Filtering
+-------------------------
+ Per-probe event filtering feature allows you to set different filter on each
+probe and gives you what arguments will be shown in trace buffer. If an event
+name is specified right after 'p:' or 'r:' in kprobe_events, it adds an event
+under tracing/events/kprobes/<EVENT>, at the directory you can see 'id',
+'enabled', 'format' and 'filter'.
+
+enabled:
+  You can enable/disable the probe by writing 1 or 0 on it.
+
+format:
+  This shows the format of this probe event.
+
+filter:
+  You can write filtering rules of this event.
+
+id:
+  This shows the id of this probe event.
+
+
+Event Profiling
+---------------
+ You can check the total number of probe hits and probe miss-hits via
+/sys/kernel/debug/tracing/kprobe_profile.
+ The first column is event name, the second is the number of probe hits,
+the third is the number of probe miss-hits.
+
+
+Usage examples
+--------------
+To add a probe as a new event, write a new definition to kprobe_events
+as below.
+
+  echo p:myprobe do_sys_open dfd=$arg0 filename=$arg1 flags=$arg2 mode=$arg3 > /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kprobe on the top of do_sys_open() function with recording
+1st to 4th arguments as "myprobe" event. As this example shows, users can
+choose more familiar names for each arguments.
+
+  echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kretprobe on the return point of do_sys_open() function with
+recording return value as "myretprobe" event.
+ You can see the format of these events via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/format.
+
+  cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
+name: myprobe
+ID: 75
+format:
+	field:unsigned short common_type;	offset:0;	size:2;
+	field:unsigned char common_flags;	offset:2;	size:1;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;
+	field:int common_pid;	offset:4;	size:4;
+	field:int common_tgid;	offset:8;	size:4;
+
+	field: unsigned long ip;	offset:16;tsize:8;
+	field: int nargs;	offset:24;tsize:4;
+	field: unsigned long dfd;	offset:32;tsize:8;
+	field: unsigned long filename;	offset:40;tsize:8;
+	field: unsigned long flags;	offset:48;tsize:8;
+	field: unsigned long mode;	offset:56;tsize:8;
+
+print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, REC->filename, REC->flags, REC->mode
+
+
+ You can see that the event has 4 arguments as in the expressions you specified.
+
+  echo > /sys/kernel/debug/tracing/kprobe_events
+
+ This clears all probe points.
+
+ Right after definition, each event is disabled by default. For tracing these
+events, you need to enable it.
+
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
+
+ And you can see the traced information via /sys/kernel/debug/tracing/trace.
+
+  cat /sys/kernel/debug/tracing/trace
+# tracer: nop
+#
+#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
+#              | |       |          |         |
+           <...>-1447  [001] 1038282.286875: myprobe: (do_sys_open+0x0/0xd6) dfd=3 filename=7fffd1ec4440 flags=8000 mode=0
+           <...>-1447  [001] 1038282.286878: myretprobe: (sys_openat+0xc/0xe <- do_sys_open) $retval=fffffffffffffffe
+           <...>-1447  [001] 1038282.286885: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=40413c flags=8000 mode=1b6
+           <...>-1447  [001] 1038282.286915: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+           <...>-1447  [001] 1038282.286969: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=4041c6 flags=98800 mode=10
+           <...>-1447  [001] 1038282.286976: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+
+
+ Each line shows when the kernel hits an event, and <- SYMBOL means kernel
+returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
+returns from do_sys_open to sys_open+0x1b).
+
+
diff --git a/MAINTAINERS b/MAINTAINERS
index 5dd6722..3154f39 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -512,10 +512,32 @@
 S:	Maintained
 F:	arch/arm/
 
+ARM PRIMECELL AACI PL041 DRIVER
+M:	Russell King <linux@arm.linux.org.uk>
+S:	Maintained
+F:	sound/arm/aaci.*
+
+ARM PRIMECELL CLCD PL110 DRIVER
+M:	Russell King <linux@arm.linux.org.uk>
+S:	Maintained
+F:	drivers/video/amba-clcd.*
+
+ARM PRIMECELL KMI PL050 DRIVER
+M:	Russell King <linux@arm.linux.org.uk>
+S:	Maintained
+F:	drivers/input/serio/ambakmi.*
+F:	include/linux/amba/kmi.h
+
 ARM PRIMECELL MMCI PL180/1 DRIVER
 S:	Orphan
 F:	drivers/mmc/host/mmci.*
 
+ARM PRIMECELL BUS SUPPORT
+M:	Russell King <linux@arm.linux.org.uk>
+S:	Maintained
+F:	drivers/amba/
+F:	include/linux/amba/bus.h
+
 ARM/ADI ROADRUNNER MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -637,6 +659,9 @@
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git://git.pengutronix.de/git/imx/linux-2.6.git
+F:	arch/arm/mach-mx*/
+F:	arch/arm/plat-mxc/
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -707,6 +732,19 @@
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
+ARM/INTEL RESEARCH IMOTE 2 MACHINE SUPPORT
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/imote2.c
+
+ARM/INTEL RESEARCH STARGATE 2 MACHINE SUPPORT
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/stargate2.c
+F:	drivers/pcmcia/pxa2xx_stargate2.c
+
 ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
@@ -749,6 +787,14 @@
 M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
 
+ARM/NOMADIK ARCHITECTURE
+M:     Alessandro Rubini <rubini@unipv.it>
+M:     STEricsson <STEricsson_nomadik_linux@list.st.com>
+L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:     Maintained
+F:     arch/arm/mach-nomadik/
+F:     arch/arm/plat-nomadik/
+
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 M:	Nelson Castillo <arhuaco@freaks-unidos.net>
 L:	openmoko-kernel@lists.openmoko.org (subscribers-only)
@@ -893,6 +939,12 @@
 W:	http://www.mcuos.com
 S:	Maintained
 
+ARM/U8500 ARM ARCHITECTURE
+M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-ux500/
+
 ARM/VFP SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1027,7 +1079,7 @@
 
 ATMEL LCDFB DRIVER
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
@@ -1098,7 +1150,6 @@
 F:	net/ax25/
 
 B43 WIRELESS DRIVER
-M:	Michael Buesch <mb@bu3sch.de>
 M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
@@ -1797,6 +1848,19 @@
 F:	drivers/scsi/dpt*
 F:	drivers/scsi/dpt/
 
+DRBD DRIVER
+P:     Philipp Reisner
+P:     Lars Ellenberg
+M:     drbd-dev@lists.linbit.com
+L:     drbd-user@lists.linbit.com
+W:     http://www.drbd.org
+T:     git git://git.drbd.org/linux-2.6-drbd.git drbd
+T:     git git://git.drbd.org/drbd-8.3.git
+S:     Supported
+F:     drivers/block/drbd/
+F:     lib/lru_cache.c
+F:     Documentation/blockdev/drbd/
+
 DRIVER CORE, KOBJECTS, AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
@@ -2113,7 +2177,7 @@
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
 S:	Orphan
 F:	Documentation/fb/
@@ -2136,7 +2200,7 @@
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
 M:	Sascha Hauer <kernel@pengutronix.de>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2312,6 +2376,13 @@
 S:	Maintained
 F:	drivers/media/video/gspca/finepix.c
 
+GSPCA GL860 SUBDRIVER
+M:	Olivier Lorin <o.lorin@laposte.net>
+L:	linux-media@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S:	Maintained
+F:	drivers/media/video/gspca/gl860/
+
 GSPCA M5602 SUBDRIVER
 M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -2533,8 +2604,7 @@
 F:	Documentation/i2c/
 F:	drivers/i2c/
 F:	include/linux/i2c.h
-F:	include/linux/i2c-dev.h
-F:	include/linux/i2c-id.h
+F:	include/linux/i2c-*.h
 
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
@@ -2635,7 +2705,7 @@
 F:	security/integrity/ima/
 
 IMS TWINTURBO FRAMEBUFFER DRIVER
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Orphan
 F:	drivers/video/imsttfb.c
 
@@ -2670,14 +2740,14 @@
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
 M:	Sylvain Meyer <sylvain.meyer@worldonline.fr>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/i810/
 
@@ -2789,6 +2859,15 @@
 S:	Supported
 F:	drivers/net/wireless/iwlwifi/
 
+INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi)
+M:	Samuel Ortiz <samuel.ortiz@intel.com>
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	Intel Linux Wireless <ilw@linux.intel.com>
+L:	linux-wireless@vger.kernel.org
+S:	Supported
+W:	http://wireless.kernel.org/en/users/Drivers/iwmc3200wifi
+F:	drivers/net/wireless/iwmc3200wifi/
+
 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
@@ -2987,11 +3066,8 @@
 F:	fs/autofs4/
 
 KERNEL BUILD
-M:	Sam Ravnborg <sam@ravnborg.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:	linux-kbuild@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	Documentation/kbuild/
 F:	Makefile
 F:	scripts/Makefile.*
@@ -3406,7 +3482,7 @@
 
 MATROX FRAMEBUFFER DRIVER
 M:	Petr Vandrovec <vandrove@vc.cvut.cz>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
@@ -3731,9 +3807,9 @@
 F:	include/linux/*device.h
 
 NETXEN (1/10) GbE SUPPORT
-M:	Dhananjay Phadke <dhananjay@netxen.com>
+M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
 L:	netdev@vger.kernel.org
-W:	http://www.netxen.com
+W:	http://www.qlogic.com
 S:	Supported
 F:	drivers/net/netxen/
 
@@ -3793,7 +3869,7 @@
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
@@ -3828,7 +3904,7 @@
 
 OMAP FRAMEBUFFER SUPPORT
 M:	Imre Deak <imre.deak@nokia.com>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
@@ -4334,14 +4410,14 @@
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/aty/radeon*
 F:	include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
 M:	Paul Mackerras <paulus@samba.org>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/aty/aty128fb.c
 
@@ -4480,7 +4556,7 @@
 
 S3 SAVAGE FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/savage/
 
@@ -5643,7 +5719,7 @@
 
 UVESAFB DRIVER
 M:	Michal Januszewski <spock@gentoo.org>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 W:	http://dev.gentoo.org/~spock/projects/uvesafb/
 S:	Maintained
 F:	Documentation/fb/uvesafb.txt
@@ -5676,7 +5752,7 @@
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
 M:	Joseph Chan <JosephChan@via.com.tw>
 M:	Scott Fang <ScottFang@viatech.com.cn>
-L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
 F:	drivers/video/via/
 
diff --git a/Makefile b/Makefile
index ad82601..33d4732 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -379,6 +379,7 @@
 PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
 
 # To avoid any implicit rule to kick in, define an empty command.
 scripts/basic/%: scripts_basic ;
diff --git a/arch/Kconfig b/arch/Kconfig
index 7f418bb..d828758 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -83,6 +83,13 @@
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
 
+config USER_RETURN_NOTIFIER
+	bool
+	depends on HAVE_USER_RETURN_NOTIFIER
+	help
+	  Provide a kernel-internal notification when a cpu is about to
+	  switch to user mode.
+
 config HAVE_IOREMAP_PROT
 	bool
 
@@ -126,4 +133,13 @@
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
 
+config HAVE_HW_BREAKPOINT
+	bool
+	depends on HAVE_PERF_EVENTS
+	select ANON_INODES
+	select PERF_EVENTS
+
+config HAVE_USER_RETURN_NOTIFIER
+	bool
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index b686cc7..01d71e1 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -9,6 +9,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 26773e3..06edfef 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -67,6 +67,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 815680b..b3e8886 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -61,21 +61,24 @@
 /*
  * Thread information flags:
  * - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first to fit in and immediate operand.
+ * - pending work-to-be-done flags come first and must be assigned to be
+ *   within bits 0 to 7 to fit in and immediate operand.
+ * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
+ *   control flags.
  *
  * TIF_SYSCALL_TRACE is known to be 0 via blbs.
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL	4	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		5	/* see sysinfo.h */
-#define TIF_UAC_NOFIX		6
-#define TIF_UAC_SIGBUS		7
-#define TIF_MEMDIE		8
-#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
-#define TIF_NOTIFY_RESUME	10	/* callback before returning to user */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	8	/* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
+#define TIF_UAC_NOPRINT		10	/* see sysinfo.h */
+#define TIF_UAC_NOFIX		11
+#define TIF_UAC_SIGBUS		12
+#define TIF_MEMDIE		13
+#define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -94,7 +97,7 @@
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
 				 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT		6
+#define ALPHA_UAC_SHIFT		10
 #define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
 				 1 << TIF_UAC_SIGBUS)
 
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 5b5c174..7f23665 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -433,10 +433,11 @@
 #define __NR_signalfd			476
 #define __NR_timerfd			477
 #define __NR_eventfd			478
+#define __NR_recvmmsg			479
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			479
+#define NR_SYSCALLS			480
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 8e059e5..53dd2f1 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -1103,6 +1103,8 @@
 	 * Allocate the info structure.
 	 */
 	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+	if (!agp)
+		return NULL;
 
 	/*
 	 * Fill it in.
diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c
index 7668649..219bf27 100644
--- a/arch/alpha/kernel/core_titan.c
+++ b/arch/alpha/kernel/core_titan.c
@@ -757,6 +757,8 @@
 	 * Allocate the info structure.
 	 */
 	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+	if (!agp)
+		return NULL;
 
 	/*
 	 * Fill it in.
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index cc78346..c0de072 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -92,7 +92,7 @@
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
 #endif
-		seq_printf(p, " %14s", irq_desc[irq].chip->typename);
+		seq_printf(p, " %14s", irq_desc[irq].chip->name);
 		seq_printf(p, "  %c%s",
 			(action->flags & IRQF_DISABLED)?'+':' ',
 			action->name);
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 38c805d..cfde865 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -228,7 +228,7 @@
 };
 
 static struct irq_chip rtc_irq_type = {
-	.typename	= "RTC",
+	.name		= "RTC",
 	.startup	= rtc_startup,
 	.shutdown	= rtc_enable_disable,
 	.enable		= rtc_enable_disable,
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 50bfec9..83a9ac2 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -84,7 +84,7 @@
 }
 
 struct irq_chip i8259a_irq_type = {
-	.typename	= "XT-PIC",
+	.name		= "XT-PIC",
 	.startup	= i8259a_startup_irq,
 	.shutdown	= i8259a_disable_irq,
 	.enable		= i8259a_enable_irq,
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
index 69199a7..989ce46 100644
--- a/arch/alpha/kernel/irq_pyxis.c
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -71,7 +71,7 @@
 }
 
 static struct irq_chip pyxis_irq_type = {
-	.typename	= "PYXIS",
+	.name		= "PYXIS",
 	.startup	= pyxis_startup_irq,
 	.shutdown	= pyxis_disable_irq,
 	.enable		= pyxis_enable_irq,
diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index 8522936..d63e93e 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -49,7 +49,7 @@
 
 /* Handle interrupts from the SRM, assuming no additional weirdness.  */
 static struct irq_chip srm_irq_type = {
-	.typename	= "SRM",
+	.name		= "SRM",
 	.startup	= srm_startup_irq,
 	.shutdown	= srm_disable_irq,
 	.enable		= srm_enable_irq,
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index 382035e..20a30b8 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -90,7 +90,7 @@
 }
 
 static struct irq_chip alcor_irq_type = {
-	.typename	= "ALCOR",
+	.name		= "ALCOR",
 	.startup	= alcor_startup_irq,
 	.shutdown	= alcor_disable_irq,
 	.enable		= alcor_enable_irq,
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index ed34943..affd0f3 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -72,7 +72,7 @@
 }
 
 static struct irq_chip cabriolet_irq_type = {
-	.typename	= "CABRIOLET",
+	.name		= "CABRIOLET",
 	.startup	= cabriolet_startup_irq,
 	.shutdown	= cabriolet_disable_irq,
 	.enable		= cabriolet_enable_irq,
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index 46e70ec..d64e1e4 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -199,7 +199,7 @@
 }
 
 static struct irq_chip dp264_irq_type = {
-	.typename	= "DP264",
+	.name		= "DP264",
 	.startup	= dp264_startup_irq,
 	.shutdown	= dp264_disable_irq,
 	.enable		= dp264_enable_irq,
@@ -210,7 +210,7 @@
 };
 
 static struct irq_chip clipper_irq_type = {
-	.typename	= "CLIPPER",
+	.name		= "CLIPPER",
 	.startup	= clipper_startup_irq,
 	.shutdown	= clipper_disable_irq,
 	.enable		= clipper_enable_irq,
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
index 660c23e..df2090c 100644
--- a/arch/alpha/kernel/sys_eb64p.c
+++ b/arch/alpha/kernel/sys_eb64p.c
@@ -70,7 +70,7 @@
 }
 
 static struct irq_chip eb64p_irq_type = {
-	.typename	= "EB64P",
+	.name		= "EB64P",
 	.startup	= eb64p_startup_irq,
 	.shutdown	= eb64p_disable_irq,
 	.enable		= eb64p_enable_irq,
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
index b99ea48..3ca1dbc 100644
--- a/arch/alpha/kernel/sys_eiger.c
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -81,7 +81,7 @@
 }
 
 static struct irq_chip eiger_irq_type = {
-	.typename	= "EIGER",
+	.name		= "EIGER",
 	.startup	= eiger_startup_irq,
 	.shutdown	= eiger_disable_irq,
 	.enable		= eiger_enable_irq,
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index ef0b83a..7a7ae36 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -119,7 +119,7 @@
 }
 
 static struct irq_chip jensen_local_irq_type = {
-	.typename	= "LOCAL",
+	.name		= "LOCAL",
 	.startup	= jensen_local_startup,
 	.shutdown	= jensen_local_shutdown,
 	.enable		= jensen_local_enable,
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index bbfc4f2..0bb3b5c 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -170,7 +170,7 @@
 }
 
 static struct irq_chip marvel_legacy_irq_type = {
-	.typename	= "LEGACY",
+	.name		= "LEGACY",
 	.startup	= marvel_irq_noop_return,
 	.shutdown	= marvel_irq_noop,
 	.enable		= marvel_irq_noop,
@@ -180,7 +180,7 @@
 };
 
 static struct irq_chip io7_lsi_irq_type = {
-	.typename	= "LSI",
+	.name		= "LSI",
 	.startup	= io7_startup_irq,
 	.shutdown	= io7_disable_irq,
 	.enable		= io7_enable_irq,
@@ -190,7 +190,7 @@
 };
 
 static struct irq_chip io7_msi_irq_type = {
-	.typename	= "MSI",
+	.name		= "MSI",
 	.startup	= io7_startup_irq,
 	.shutdown	= io7_disable_irq,
 	.enable		= io7_enable_irq,
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 4e36664..ee88651 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -69,7 +69,7 @@
 }
 
 static struct irq_chip mikasa_irq_type = {
-	.typename	= "MIKASA",
+	.name		= "MIKASA",
 	.startup	= mikasa_startup_irq,
 	.shutdown	= mikasa_disable_irq,
 	.enable		= mikasa_enable_irq,
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index 35753a1..86503fe 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -74,7 +74,7 @@
 }
 
 static struct irq_chip noritake_irq_type = {
-	.typename	= "NORITAKE",
+	.name		= "NORITAKE",
 	.startup	= noritake_startup_irq,
 	.shutdown	= noritake_disable_irq,
 	.enable		= noritake_enable_irq,
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index f3aec7e..26c322b 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -136,7 +136,7 @@
 }
 
 static struct irq_chip rawhide_irq_type = {
-	.typename	= "RAWHIDE",
+	.name		= "RAWHIDE",
 	.startup	= rawhide_startup_irq,
 	.shutdown	= rawhide_disable_irq,
 	.enable		= rawhide_enable_irq,
diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
index d9f9cfe..8de1046 100644
--- a/arch/alpha/kernel/sys_ruffian.c
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -66,7 +66,7 @@
 	common_init_isa_dma();
 }
 
-#define RUFFIAN_LATCH	((PIT_TICK_RATE + HZ / 2) / HZ)
+#define RUFFIAN_LATCH	DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
 
 static void __init
 ruffian_init_rtc(void)
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
index fc92463..be16112 100644
--- a/arch/alpha/kernel/sys_rx164.c
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -73,7 +73,7 @@
 }
 
 static struct irq_chip rx164_irq_type = {
-	.typename	= "RX164",
+	.name		= "RX164",
 	.startup	= rx164_startup_irq,
 	.shutdown	= rx164_disable_irq,
 	.enable		= rx164_enable_irq,
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 426eb690..b2abe27 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -502,7 +502,7 @@
 }
 
 static struct irq_chip sable_lynx_irq_type = {
-	.typename	= "SABLE/LYNX",
+	.name		= "SABLE/LYNX",
 	.startup	= sable_lynx_startup_irq,
 	.shutdown	= sable_lynx_disable_irq,
 	.enable		= sable_lynx_enable_irq,
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index 830318c..2304648 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -75,7 +75,7 @@
 }
 
 static struct irq_chip takara_irq_type = {
-	.typename	= "TAKARA",
+	.name		= "TAKARA",
 	.startup	= takara_startup_irq,
 	.shutdown	= takara_disable_irq,
 	.enable		= takara_enable_irq,
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 88978fc..2880533 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -195,7 +195,7 @@
 }
 
 static struct irq_chip titan_irq_type = {
-       .typename       = "TITAN",
+       .name	       = "TITAN",
        .startup        = titan_startup_irq,
        .shutdown       = titan_disable_irq,
        .enable         = titan_enable_irq,
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index e91b4c3..62fd972 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -158,7 +158,7 @@
 }
 
 static struct irq_chip wildfire_irq_type = {
-	.typename	= "WILDFIRE",
+	.name		= "WILDFIRE",
 	.startup	= wildfire_startup_irq,
 	.shutdown	= wildfire_disable_irq,
 	.enable		= wildfire_enable_irq,
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 95c9aef..cda6b8b 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -497,6 +497,7 @@
 	.quad sys_signalfd
 	.quad sys_ni_syscall
 	.quad sys_eventfd
+	.quad sys_recvmmsg
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c..cf8a99f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -433,6 +433,17 @@
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_DOVE
+	bool "Marvell Dove"
+	select PCI
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Dove SoC 88AP510
+
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
@@ -702,6 +713,16 @@
 	help
 	  Support for Broadcom's BCMRing platform.
 
+config ARCH_U8500
+	bool "ST-Ericsson U8500 Series"
+	select CPU_V7
+	select ARM_AMBA
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select COMMON_CLKDEV
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -747,6 +768,9 @@
 
 source "arch/arm/mach-kirkwood/Kconfig"
 
+source "arch/arm/mach-dove/Kconfig"
+
+source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -787,6 +811,7 @@
 source "arch/arm/plat-mxc/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 
@@ -804,12 +829,16 @@
 
 source "arch/arm/mach-bcmring/Kconfig"
 
+source "arch/arm/mach-ux500/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
 
 config PLAT_IOP
 	bool
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_TIME
 
 config PLAT_ORION
 	bool
@@ -955,10 +984,10 @@
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1056,9 @@
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1a6f70e..ff54c23 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -83,6 +83,14 @@
 	  It does include a timeout to ensure that the system does not
 	  totally freeze when there is nothing connected to read.
 
+config OC_ETM
+	bool "On-chip ETM and ETB"
+	select ARM_AMBA
+	help
+	  Enables the on-chip embedded trace macrocell and embedded trace
+	  buffer driver that will allow you to collect traces of the
+	  kernel code.
+
 config DEBUG_DC21285_PORT
 	bool "Kernel low-level debugging messages via footbridge serial port"
 	depends on DEBUG_LL && FOOTBRIDGE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf..fa0cdab 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -122,6 +122,7 @@
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		:= gemini
@@ -166,6 +167,7 @@
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
@@ -176,11 +178,12 @@
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf4..d356af7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -743,6 +743,12 @@
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
+		.word	0x560f5810		@ Marvell PJ4 ARMv6
+		.word	0xff0ffff0
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
+
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac91..5a375e5 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -342,6 +342,22 @@
 }
 EXPORT_SYMBOL(dma_map_single);
 
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer.  (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		enum dma_data_direction dir)
+{
+	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+		__func__, (void *) dma_addr, size, dir);
+
+	unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size, enum dma_data_direction dir)
 {
@@ -366,8 +382,7 @@
  * the safe buffer.  (basically return things back to the way they
  * should be)
  */
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +390,7 @@
 
 	unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
 
 int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 		unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/configs/am3517_evm_defconfig b/arch/arm/configs/am3517_evm_defconfig
new file mode 100644
index 0000000..ad54e92
--- /dev/null
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -0,0 +1,1207 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Wed Oct 28 15:47:47 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_OMAP3517EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 238b218..c97e102 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -120,6 +120,7 @@
 # CONFIG_MACH_CARMEVA is not set
 # CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+CONFIG_MACH_ECO920=y
 
 #
 # AT91RM9200 Feature Selections
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
new file mode 100644
index 0000000..e42c5c8
--- /dev/null
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -0,0 +1,1733 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 17:10:40 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+CONFIG_MACH_CM_T35=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index d18d21b..a017086 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Thu Jun  4 09:53:21 2009
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 19:03:13 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +44,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -83,7 +82,6 @@
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -96,6 +94,10 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -103,13 +105,17 @@
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,11 +123,11 @@
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +148,22 @@
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -163,25 +172,27 @@
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -191,16 +202,19 @@
 # Supported PXA3xx Processor Variants
 #
 CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA310=y
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
 # CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
 # CONFIG_ARCH_VIPER is not set
@@ -218,6 +232,7 @@
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
 # CONFIG_MACH_HIMALAYA is not set
 # CONFIG_MACH_MIOA701 is not set
@@ -225,8 +240,8 @@
 # CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
 CONFIG_PLAT_PXA=y
 
 #
@@ -236,7 +251,7 @@
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -246,11 +261,12 @@
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -272,11 +288,12 @@
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
@@ -292,17 +309,19 @@
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -355,6 +374,7 @@
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -396,6 +416,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +431,7 @@
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -433,22 +455,27 @@
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -461,6 +488,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -472,9 +500,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -521,6 +549,9 @@
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -556,7 +587,15 @@
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -570,6 +609,7 @@
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -593,10 +633,6 @@
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -621,7 +657,6 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -636,6 +671,7 @@
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -648,20 +684,20 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_HOSTAP is not set
 
 #
@@ -683,6 +719,7 @@
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -706,33 +743,51 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -760,6 +815,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
@@ -774,6 +830,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -784,6 +841,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
@@ -807,19 +865,36 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -839,11 +914,17 @@
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -860,32 +941,33 @@
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_DA903X=y
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -925,7 +1007,17 @@
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
 # CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
 
 #
 # Display device support
@@ -956,38 +1048,48 @@
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
 CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 
 #
@@ -1006,10 +1108,12 @@
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1023,9 +1127,15 @@
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1054,6 +1164,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1151,8 +1262,9 @@
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1162,8 +1274,10 @@
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
 
 #
@@ -1179,6 +1293,7 @@
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1210,10 +1325,19 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1233,12 +1357,15 @@
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1256,10 +1383,13 @@
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1319,6 +1449,12 @@
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1329,12 +1465,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1378,7 +1514,7 @@
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1428,6 +1564,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1441,6 +1578,7 @@
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1460,32 +1598,20 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1509,7 +1635,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1551,11 +1676,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -1591,9 +1718,9 @@
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1608,7 +1735,7 @@
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1616,6 +1743,8 @@
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
new file mode 100644
index 0000000..b3a4916
--- /dev/null
+++ b/arch/arm/configs/dove_defconfig
@@ -0,0 +1,1620 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Tue Nov 24 13:53:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_DOVE=y
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Marvell Dove Implementations
+#
+CONFIG_MACH_DOVE_DB=y
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index d5ee16e..492f29a 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon Jul  7 17:52:21 2008
+# Linux kernel version: 2.6.32-rc5
+# Mon Nov  2 13:18:50 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,24 +9,22 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -35,7 +33,7 @@
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-ezxdev"
+CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -44,56 +42,78 @@
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,12 +121,10 @@
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -120,25 +138,27 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -146,39 +166,64 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
 CONFIG_MACH_EZX_A780=y
 CONFIG_MACH_EZX_E680=y
@@ -186,17 +231,11 @@
 CONFIG_MACH_EZX_A910=y
 CONFIG_MACH_EZX_E6=y
 CONFIG_MACH_EZX_E2=y
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA27x=y
 CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
@@ -205,7 +244,7 @@
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -216,9 +255,10 @@
 #
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -231,44 +271,71 @@
 # Kernel Features
 #
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -285,6 +352,8 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 
@@ -297,11 +366,8 @@
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -315,6 +381,7 @@
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -342,7 +409,6 @@
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -393,18 +459,22 @@
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -413,20 +483,23 @@
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -434,20 +507,21 @@
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -455,8 +529,8 @@
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -469,9 +543,9 @@
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -483,30 +557,29 @@
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 # CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -517,9 +590,11 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -529,64 +604,34 @@
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 CONFIG_BT=y
-CONFIG_BT_L2CAP=m
+CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
+CONFIG_BT_HIDP=y
 
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 # CONFIG_BT_HCIUART_BCSP is not set
 # CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -598,13 +643,19 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -616,9 +667,9 @@
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -647,7 +698,7 @@
 # CONFIG_MTD_CFI_I2 is not set
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
+CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -655,19 +706,15 @@
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_XIP=y
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -675,6 +722,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -690,6 +738,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -700,15 +753,14 @@
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -722,7 +774,6 @@
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -732,13 +783,11 @@
 # CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -765,6 +814,7 @@
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -786,29 +836,45 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=y
 CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
@@ -816,7 +882,10 @@
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_PCAP=y
 
 #
 # Hardware I/O ports
@@ -828,6 +897,7 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -842,92 +912,130 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
 
 #
-# GPIO Support
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -938,54 +1046,170 @@
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
-
-#
-# Multimedia devices
-#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_PCAP=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
 CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_PXA27x is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
 # CONFIG_DAB is not set
 
 #
@@ -996,6 +1220,7 @@
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1017,15 +1242,19 @@
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
 
 #
@@ -1053,85 +1282,60 @@
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1150,32 +1354,42 @@
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1183,7 +1397,6 @@
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1196,7 +1409,7 @@
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1204,62 +1417,94 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-CONFIG_USB_GADGET_PXA27X=y
-CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 # CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1267,7 +1512,14 @@
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1297,45 +1549,67 @@
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PCAP=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
-CONFIG_FS_MBCACHE=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -1350,6 +1624,10 @@
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1357,6 +1635,12 @@
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1381,15 +1665,13 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1397,13 +1679,35 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1411,19 +1715,18 @@
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1490,25 +1793,83 @@
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
@@ -1516,12 +1877,20 @@
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1549,14 +1918,20 @@
 #
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1587,28 +1962,40 @@
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index f6aed77..efa78e1 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,86 +1,189 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Thu Jun  9 01:59:03 2005
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 24 00:09:30 2009
 #
 CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
 #
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_AIO=y
 
 #
-# Loadable module support
+# Kernel Performance Events And Counters
 #
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # SA11x0 Implementations
@@ -106,27 +209,31 @@
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
 #
 CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -138,11 +245,41 @@
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -151,22 +288,26 @@
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 # CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_SA1100=y
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -183,6 +324,8 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -191,190 +334,13 @@
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -382,10 +348,16 @@
 #
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -394,18 +366,28 @@
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -413,23 +395,19 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -461,60 +439,185 @@
 #
 
 #
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
 # FIR device drivers
 #
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
-# CONFIG_VIA_FIR is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 # CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
@@ -525,10 +628,6 @@
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -537,20 +636,23 @@
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -560,7 +662,6 @@
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -568,47 +669,42 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
@@ -618,71 +714,125 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Misc devices
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
 #
 
 #
-# Multimedia devices
+# I2C GPIO expanders:
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
-# Digital Video Broadcasting Devices
+# PCI GPIO expanders:
 #
-# CONFIG_DVB is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+CONFIG_HTC_EGPIO=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_SA1100=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -691,65 +841,54 @@
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -771,16 +910,13 @@
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -788,34 +924,37 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -831,10 +970,6 @@
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -875,20 +1010,34 @@
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -896,21 +1045,120 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
 
 #
-# Hardware crypto devices
+# Authenticated Encryption with Associated Data
 #
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
new file mode 100644
index 0000000..3382676
--- /dev/null
+++ b/arch/arm/configs/htcherald_defconfig
@@ -0,0 +1,1142 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov 14 10:56:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP850=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_HTCWIZARD is not set
+CONFIG_MACH_HERALD=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_195MHZ=y
+# CONFIG_OMAP_ARM_182MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
new file mode 100644
index 0000000..c97f8d0
--- /dev/null
+++ b/arch/arm/configs/igep0020_defconfig
@@ -0,0 +1,1554 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Fri Nov 13 12:01:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+CONFIG_MACH_IGEP0020=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_SPI=m
+CONFIG_ATH_COMMON=m
+CONFIG_AR9170_USB=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+# CONFIG_WL1251 is not set
+# CONFIG_WL1271 is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index a4f9a2a..7734cca 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Tue Jul 28 14:11:34 2009
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov  1 22:56:24 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,7 +9,6 @@
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,16 +87,14 @@
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -139,6 +137,7 @@
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -153,6 +152,7 @@
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -175,18 +175,22 @@
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Freescale MXC Implementations
 #
 # CONFIG_ARCH_MX1 is not set
 # CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
 CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX31=y
 CONFIG_ARCH_MX35=y
 
@@ -205,6 +209,7 @@
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_ARCH_HAS_RNGA=y
@@ -218,7 +223,7 @@
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -236,6 +241,7 @@
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
@@ -257,6 +263,8 @@
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -277,6 +285,7 @@
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -326,6 +335,7 @@
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -367,6 +377,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -407,6 +418,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -416,9 +428,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -587,14 +599,12 @@
 # CONFIG_B44 is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -608,6 +618,7 @@
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -630,7 +641,14 @@
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -649,6 +667,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,15 +700,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -712,6 +733,10 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 CONFIG_W1=y
 
 #
@@ -734,7 +759,6 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -759,12 +783,24 @@
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 CONFIG_MFD_WM8350=y
 CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
 
 #
@@ -874,10 +910,12 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
@@ -896,16 +934,11 @@
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -921,6 +954,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -995,7 +1029,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1033,6 +1066,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1062,7 +1096,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1104,11 +1137,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
similarity index 100%
rename from arch/arm/configs/w90p910_defconfig
rename to arch/arm/configs/nuc910_defconfig
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 0000000..df1de9b
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 0000000..4b2cd9e
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,922 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index b3c8cce..9cfae37 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -52,8 +52,8 @@
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
new file mode 100644
index 0000000..2af28ea
--- /dev/null
+++ b/arch/arm/configs/omap3_defconfig
@@ -0,0 +1,2119 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Tue Dec  1 14:04:02 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_MACH_OMAP3517EVM=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_RX51=y
+CONFIG_MACH_OMAP_ZOOM2=y
+CONFIG_MACH_OMAP_ZOOM3=y
+CONFIG_MACH_CM_T35=y
+CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_OMAP_3630SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCD_VGA=y
+# CONFIG_FB_OMAP_031M3R is not set
+# CONFIG_FB_OMAP_048M3R is not set
+CONFIG_FB_OMAP_079M3R=y
+# CONFIG_FB_OMAP_092M9R is not set
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
+# CONFIG_SND_OMAP_SOC_SDP3430 is not set
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
+# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index d5ff477..e190fc8 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -59,8 +59,8 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -617,8 +617,8 @@
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
-CONFIG_SMC911X=y
-# CONFIG_SMSC911X is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -676,13 +676,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1126,7 +1132,7 @@
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=m
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 150deaf..b7a8d9f 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -51,8 +51,9 @@
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
+
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 5a305f0..8482958 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Tue Jun 23 10:36:45 2009
+# Linux kernel version: 2.6.31-rc9-omap1
+# Tue Sep 15 16:48:34 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,12 @@
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -61,12 +58,15 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -79,7 +79,7 @@
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -88,21 +88,29 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
+# CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,12 +118,11 @@
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,11 +133,11 @@
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_FREEZER=y
 
 #
@@ -142,12 +149,14 @@
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,24 +165,25 @@
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -182,17 +192,19 @@
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
 
 #
 # OMAP Feature Selections
 #
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -200,7 +212,8 @@
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
@@ -210,8 +223,11 @@
 # CONFIG_MACH_OMAP3_BEAGLE is not set
 # CONFIG_MACH_OMAP_LDP is not set
 # CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
 # CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
 
 #
 # Processor Type
@@ -234,12 +250,15 @@
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
+# CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -262,10 +281,10 @@
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -277,9 +296,12 @@
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_LEDS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -288,8 +310,7 @@
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
 # CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
+# CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
@@ -318,6 +339,9 @@
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 CONFIG_VFPv3=y
 CONFIG_NEON=y
@@ -326,8 +350,9 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
 
 #
@@ -345,9 +370,8 @@
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
+# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -372,7 +396,7 @@
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
@@ -383,25 +407,7 @@
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -419,6 +425,8 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -429,56 +437,9 @@
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -493,9 +454,7 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -506,7 +465,7 @@
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
 
@@ -526,8 +485,10 @@
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -538,6 +499,10 @@
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -546,6 +511,9 @@
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -569,6 +537,7 @@
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -589,20 +558,21 @@
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
+# CONFIG_OMAP_STI is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -611,14 +581,15 @@
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
-CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
@@ -632,12 +603,8 @@
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -655,34 +622,18 @@
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
+# CONFIG_TUN is not set
 # CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
@@ -695,7 +646,7 @@
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
+# CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
@@ -710,8 +661,10 @@
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
-CONFIG_SMC911X=m
-CONFIG_SMSC911X=m
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -720,33 +673,16 @@
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -755,41 +691,14 @@
 #
 # USB Network Adapters
 #
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -805,10 +714,7 @@
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
@@ -818,47 +724,54 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -878,6 +791,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -885,6 +799,7 @@
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -900,6 +815,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
@@ -925,8 +841,6 @@
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,68 +889,8 @@
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -1046,7 +900,8 @@
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
@@ -1077,237 +932,9 @@
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-# CONFIG_DVB_TDA8261 is not set
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-# CONFIG_DVB_TUNER_CX24113 is not set
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-# CONFIG_DVB_LGDT3304 is not set
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1366,53 +993,10 @@
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-CONFIG_SND_OMAP_SOC_SDP3430=y
-# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
+# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1425,35 +1009,35 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -1461,9 +1045,9 @@
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1476,8 +1060,12 @@
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
@@ -1493,23 +1081,25 @@
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1551,14 +1141,14 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TEST=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
@@ -1574,25 +1164,29 @@
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_CDC_COMPOSITE=m
 
 #
 # OTG and related infrastructure
@@ -1601,6 +1195,7 @@
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -1617,7 +1212,6 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
@@ -1628,9 +1222,16 @@
 #
 # LED drivers
 #
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+# CONFIG_LEDS_OMAP_PWM is not set
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1639,7 +1240,12 @@
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1672,6 +1278,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1703,6 +1310,7 @@
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -1711,32 +1319,36 @@
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
 #
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1749,16 +1361,18 @@
 CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
@@ -1793,15 +1407,13 @@
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
@@ -1816,20 +1428,20 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1917,12 +1529,15 @@
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1932,10 +1547,9 @@
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
@@ -1950,30 +1564,20 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1982,10 +1586,6 @@
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
 
 #
@@ -2000,13 +1600,15 @@
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -2021,58 +1623,58 @@
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
 #
-CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2080,6 +1682,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -2087,17 +1690,16 @@
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_CRC7=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
new file mode 100644
index 0000000..e836c8a
--- /dev/null
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -0,0 +1,1611 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Thu Nov 12 12:21:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+CONFIG_MACH_OMAP_3630SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 23e43ea..a464ca3 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -52,8 +52,8 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index b9c4891..9139532 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -49,8 +49,8 @@
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index f1739fa..eef9362 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -59,8 +59,8 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -202,7 +202,8 @@
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
new file mode 100644
index 0000000..f0e7d0f
--- /dev/null
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -0,0 +1,1610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Thu Nov 12 13:04:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+CONFIG_MACH_OMAP_ZOOM3=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index a57f9e4..b3ea2c4 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -54,8 +54,8 @@
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index e7e3133..1559734 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -784,7 +784,7 @@
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 0000000..15fde22
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,680 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+
+#
+# ST-Ericsson platform type
+#
+
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3d0cdd2..73eceb8 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -331,15 +331,15 @@
  * Convert calls to our calling convention.
  */
 #define flush_cache_all()		__cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_all();
 }
 
 static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +347,7 @@
 }
 
 static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +356,7 @@
 }
 
 static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long uaddr, void *kaddr,
 			 unsigned long len, int write)
 {
@@ -365,6 +365,16 @@
 		__cpuc_coherent_kern_range(addr, addr + len);
 	}
 }
+
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+		vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+		vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+		vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+		vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -408,10 +418,9 @@
  * about to change to user space.  This is the same method as used on SPARC64.
  * See update_mmu_cache for the user space part.
  */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
 static inline void __flush_icache_all(void)
 {
 #ifdef CONFIG_ARM_ERRATA_411920
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa..a96300b 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
  * must not be used by drivers.
  */
 #ifndef __arch_page_to_dma
-
-#if !defined(CONFIG_HIGHMEM)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
-{
-	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
-}
-#elif defined(__pfn_to_bus)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
 	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
 }
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
+
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+	return pfn_to_page(__bus_to_pfn(addr));
+}
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -45,6 +40,11 @@
 	return __arch_page_to_dma(dev, page);
 }
 
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+	return __arch_dma_to_page(dev, addr);
+}
+
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
 	return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@
  */
 extern dma_addr_t dma_map_single(struct device *, void *, size_t,
 		enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+		enum dma_data_direction);
 extern dma_addr_t dma_map_page(struct device *, struct page *,
 		unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
 		enum dma_data_direction);
 
 /*
@@ -352,7 +354,6 @@
 {
 	/* nothing to do */
 }
-#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	dma_unmap_single(dev, handle, size, dir);
+	/* nothing to do */
 }
+#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
new file mode 100644
index 0000000..538f17c
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
new file mode 100644
index 0000000..f82b25d
--- /dev/null
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -0,0 +1,165 @@
+/*
+ * linux/arch/arm/include/asm/hardware/coresight.h
+ *
+ * CoreSight components' registers
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_HARDWARE_CORESIGHT_H
+#define __ASM_HARDWARE_CORESIGHT_H
+
+#define TRACER_ACCESSED_BIT	0
+#define TRACER_RUNNING_BIT	1
+#define TRACER_CYCLE_ACC_BIT	2
+#define TRACER_ACCESSED		BIT(TRACER_ACCESSED_BIT)
+#define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
+#define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
+
+struct tracectx {
+	unsigned int	etb_bufsz;
+	void __iomem	*etb_regs;
+	void __iomem	*etm_regs;
+	unsigned long	flags;
+	int		ncmppairs;
+	int		etm_portsz;
+	struct device	*dev;
+	struct clk	*emu_clk;
+	struct mutex	mutex;
+};
+
+#define TRACER_TIMEOUT 10000
+
+#define etm_writel(t, v, x) \
+	(__raw_writel((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+
+/* CoreSight Management Registers */
+#define CSMR_LOCKACCESS 0xfb0
+#define CSMR_LOCKSTATUS 0xfb4
+#define CSMR_AUTHSTATUS 0xfb8
+#define CSMR_DEVID	0xfc8
+#define CSMR_DEVTYPE	0xfcc
+/* CoreSight Component Registers */
+#define CSCR_CLASS	0xff4
+
+#define CSCR_PRSR	0x314
+
+#define UNLOCK_MAGIC	0xc5acce55
+
+/* ETM control register, "ETM Architecture", 3.3.1 */
+#define ETMR_CTRL		0
+#define ETMCTRL_POWERDOWN	1
+#define ETMCTRL_PROGRAM		(1 << 10)
+#define ETMCTRL_PORTSEL		(1 << 11)
+#define ETMCTRL_DO_CONTEXTID	(3 << 14)
+#define ETMCTRL_PORTMASK1	(7 << 4)
+#define ETMCTRL_PORTMASK2	(1 << 21)
+#define ETMCTRL_PORTMASK	(ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
+#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
+#define ETMCTRL_DO_CPRT		(1 << 1)
+#define ETMCTRL_DATAMASK	(3 << 2)
+#define ETMCTRL_DATA_DO_DATA	(1 << 2)
+#define ETMCTRL_DATA_DO_ADDR	(1 << 3)
+#define ETMCTRL_DATA_DO_BOTH	(ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
+#define ETMCTRL_BRANCH_OUTPUT	(1 << 8)
+#define ETMCTRL_CYCLEACCURATE	(1 << 12)
+
+/* ETM configuration code register */
+#define ETMR_CONFCODE		(0x04)
+
+/* ETM trace start/stop resource control register */
+#define ETMR_TRACESSCTRL	(0x18)
+
+/* ETM trigger event register */
+#define ETMR_TRIGEVT		(0x08)
+
+/* address access type register bits, "ETM architecture",
+ * table 3-27 */
+/* - access type */
+#define ETMAAT_IFETCH		0
+#define ETMAAT_IEXEC		1
+#define ETMAAT_IEXECPASS	2
+#define ETMAAT_IEXECFAIL	3
+#define ETMAAT_DLOADSTORE	4
+#define ETMAAT_DLOAD		5
+#define ETMAAT_DSTORE		6
+/* - comparison access size */
+#define ETMAAT_JAVA		(0 << 3)
+#define ETMAAT_THUMB		(1 << 3)
+#define ETMAAT_ARM		(3 << 3)
+/* - data value comparison control */
+#define ETMAAT_NOVALCMP		(0 << 5)
+#define ETMAAT_VALMATCH		(1 << 5)
+#define ETMAAT_VALNOMATCH	(3 << 5)
+/* - exact match */
+#define ETMAAT_EXACTMATCH	(1 << 7)
+/* - context id comparator control */
+#define ETMAAT_IGNCONTEXTID	(0 << 8)
+#define ETMAAT_VALUE1		(1 << 8)
+#define ETMAAT_VALUE2		(2 << 8)
+#define ETMAAT_VALUE3		(3 << 8)
+/* - security level control */
+#define ETMAAT_IGNSECURITY	(0 << 10)
+#define ETMAAT_NSONLY		(1 << 10)
+#define ETMAAT_SONLY		(2 << 10)
+
+#define ETMR_COMP_VAL(x)	(0x40 + (x) * 4)
+#define ETMR_COMP_ACC_TYPE(x)	(0x80 + (x) * 4)
+
+/* ETM status register, "ETM Architecture", 3.3.2 */
+#define ETMR_STATUS		(0x10)
+#define ETMST_OVERFLOW		(1 << 0)
+#define ETMST_PROGBIT		(1 << 1)
+#define ETMST_STARTSTOP		(1 << 2)
+#define ETMST_TRIGGER		(1 << 3)
+
+#define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
+#define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
+#define etm_triggered(t)	(etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
+
+#define ETMR_TRACEENCTRL2	0x1c
+#define ETMR_TRACEENCTRL	0x24
+#define ETMTE_INCLEXCL		(1 << 24)
+#define ETMR_TRACEENEVT		0x20
+#define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT | \
+				ETMCTRL_DATA_DO_ADDR | \
+				ETMCTRL_BRANCH_OUTPUT | \
+				ETMCTRL_DO_CONTEXTID)
+
+/* ETB registers, "CoreSight Components TRM", 9.3 */
+#define ETBR_DEPTH		0x04
+#define ETBR_STATUS		0x0c
+#define ETBR_READMEM		0x10
+#define ETBR_READADDR		0x14
+#define ETBR_WRITEADDR		0x18
+#define ETBR_TRIGGERCOUNT	0x1c
+#define ETBR_CTRL		0x20
+#define ETBR_FORMATTERCTRL	0x304
+#define ETBFF_ENFTC		1
+#define ETBFF_ENFCONT		(1 << 1)
+#define ETBFF_FONFLIN		(1 << 4)
+#define ETBFF_MANUAL_FLUSH	(1 << 6)
+#define ETBFF_TRIGIN		(1 << 8)
+#define ETBFF_TRIGEVT		(1 << 9)
+#define ETBFF_TRIGFL		(1 << 10)
+
+#define etb_writel(t, v, x) \
+	(__raw_writel((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+
+#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etm_unlock(t) \
+	do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etb_unlock(t) \
+	do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#endif /* __ASM_HARDWARE_CORESIGHT_H */
+
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 8d60ad26..5daea29 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,7 +234,13 @@
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
+
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
+	return val;
+}
 
 static inline void write_tmr0(u32 val)
 {
@@ -253,6 +259,11 @@
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -260,6 +271,11 @@
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
index d16ec97..c019949 100644
--- a/arch/arm/include/asm/kmap_types.h
+++ b/arch/arm/include/asm/kmap_types.h
@@ -22,4 +22,10 @@
 	KM_TYPE_NR
 };
 
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI		(-1)
+#define KM_NMI_PTE	(-1)
+#define KM_IRQ_PTE	(-1)
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf0..5421d82 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  */
+#ifndef __virt_to_phys
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
 
 /*
  * Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
 #define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
 #define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
 
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -194,7 +202,8 @@
 #ifndef __virt_to_bus
 #define __virt_to_bus	__virt_to_phys
 #define __bus_to_virt	__phys_to_virt
-#define __pfn_to_bus(x)	((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x)	__pfn_to_phys(x)
+#define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
 static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@
 #endif /* !CONFIG_DISCONTIGMEM */
 
 /*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
  */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa..1139768 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@
 
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
+#define __pgprot_modify(prot,mask,bits)		\
+	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot) \
-	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
-	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define pmd_present(pmd)	(pmd_val(pmd))
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 92ac61d..90ffd04 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f..9997ad2 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
 #  define __SWAB_64_THRU_32__
 #endif
 
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+	__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+	return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#else
+
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__u32 t;
@@ -48,3 +66,4 @@
 
 #endif
 
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5..058e7e9 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		dmb()
+#define rmb()		dmb()
+#define wmb()		dmb()
+#else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+
+#ifndef CONFIG_SMP
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define mb()		dmb()
-#define rmb()		dmb()
-#define wmb()		dmb()
-#define smp_mb()	dmb()
-#define smp_rmb()	dmb()
-#define smp_wmb()	dmb()
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
 #endif
+
 #define read_barrier_depends()		do { } while(0)
 #define smp_read_barrier_depends()	do { } while(0)
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 79087dd..e7ccf7e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,8 @@
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_OC_ETM)		+= etm.o
+
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
 obj-$(CONFIG_FIQ)		+= fiq.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index fafce1b..f58c115 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -374,6 +374,7 @@
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
 		CALL(sys_perf_event_open)
+/* 365 */	CALL(sys_recvmmsg)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
new file mode 100644
index 0000000..8277539
--- /dev/null
+++ b/arch/arm/kernel/etm.c
@@ -0,0 +1,641 @@
+/*
+ * linux/arch/arm/kernel/etm.c
+ *
+ * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/mutex.h>
+#include <asm/hardware/coresight.h>
+#include <asm/sections.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+static struct tracectx tracer;
+
+static inline bool trace_isrunning(struct tracectx *t)
+{
+	return !!(t->flags & TRACER_RUNNING);
+}
+
+static int etm_setup_address_range(struct tracectx *t, int n,
+		unsigned long start, unsigned long end, int exclude, int data)
+{
+	u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \
+		    ETMAAT_NOVALCMP;
+
+	if (n < 1 || n > t->ncmppairs)
+		return -EINVAL;
+
+	/* comparators and ranges are numbered starting with 1 as opposed
+	 * to bits in a word */
+	n--;
+
+	if (data)
+		flags |= ETMAAT_DLOADSTORE;
+	else
+		flags |= ETMAAT_IEXEC;
+
+	/* first comparator for the range */
+	etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2));
+	etm_writel(t, start, ETMR_COMP_VAL(n * 2));
+
+	/* second comparator is right next to it */
+	etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1));
+	etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1));
+
+	flags = exclude ? ETMTE_INCLEXCL : 0;
+	etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL);
+
+	return 0;
+}
+
+static int trace_start(struct tracectx *t)
+{
+	u32 v;
+	unsigned long timeout = TRACER_TIMEOUT;
+
+	etb_unlock(t);
+
+	etb_writel(t, 0, ETBR_FORMATTERCTRL);
+	etb_writel(t, 1, ETBR_CTRL);
+
+	etb_lock(t);
+
+	/* configure etm */
+	v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz);
+
+	if (t->flags & TRACER_CYCLE_ACC)
+		v |= ETMCTRL_CYCLEACCURATE;
+
+	etm_unlock(t);
+
+	etm_writel(t, v, ETMR_CTRL);
+
+	while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_setup_address_range(t, 1, (unsigned long)_stext,
+			(unsigned long)_etext, 0, 0);
+	etm_writel(t, 0, ETMR_TRACEENCTRL2);
+	etm_writel(t, 0, ETMR_TRACESSCTRL);
+	etm_writel(t, 0x6f, ETMR_TRACEENEVT);
+
+	v &= ~ETMCTRL_PROGRAM;
+	v |= ETMCTRL_PORTSEL;
+
+	etm_writel(t, v, ETMR_CTRL);
+
+	timeout = TRACER_TIMEOUT;
+	while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_lock(t);
+
+	t->flags |= TRACER_RUNNING;
+
+	return 0;
+}
+
+static int trace_stop(struct tracectx *t)
+{
+	unsigned long timeout = TRACER_TIMEOUT;
+
+	etm_unlock(t);
+
+	etm_writel(t, 0x440, ETMR_CTRL);
+	while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_lock(t);
+
+	etb_unlock(t);
+	etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL);
+
+	timeout = TRACER_TIMEOUT;
+	while (etb_readl(t, ETBR_FORMATTERCTRL) &
+			ETBFF_MANUAL_FLUSH && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for formatter flush to commence "
+				"timed out\n");
+		etb_lock(t);
+		return -EFAULT;
+	}
+
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_lock(t);
+
+	t->flags &= ~TRACER_RUNNING;
+
+	return 0;
+}
+
+static int etb_getdatalen(struct tracectx *t)
+{
+	u32 v;
+	int rp, wp;
+
+	v = etb_readl(t, ETBR_STATUS);
+
+	if (v & 1)
+		return t->etb_bufsz;
+
+	rp = etb_readl(t, ETBR_READADDR);
+	wp = etb_readl(t, ETBR_WRITEADDR);
+
+	if (rp > wp) {
+		etb_writel(t, 0, ETBR_READADDR);
+		etb_writel(t, 0, ETBR_WRITEADDR);
+
+		return 0;
+	}
+
+	return wp - rp;
+}
+
+/* sysrq+v will always stop the running trace and leave it at that */
+static void etm_dump(void)
+{
+	struct tracectx *t = &tracer;
+	u32 first = 0;
+	int length;
+
+	if (!t->etb_regs) {
+		printk(KERN_INFO "No tracing hardware found\n");
+		return;
+	}
+
+	if (trace_isrunning(t))
+		trace_stop(t);
+
+	etb_unlock(t);
+
+	length = etb_getdatalen(t);
+
+	if (length == t->etb_bufsz)
+		first = etb_readl(t, ETBR_WRITEADDR);
+
+	etb_writel(t, first, ETBR_READADDR);
+
+	printk(KERN_INFO "Trace buffer contents length: %d\n", length);
+	printk(KERN_INFO "--- ETB buffer begin ---\n");
+	for (; length; length--)
+		printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM)));
+	printk(KERN_INFO "\n--- ETB buffer end ---\n");
+
+	/* deassert the overflow bit */
+	etb_writel(t, 1, ETBR_CTRL);
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+	etb_writel(t, 0, ETBR_READADDR);
+	etb_writel(t, 0, ETBR_WRITEADDR);
+
+	etb_lock(t);
+}
+
+static void sysrq_etm_dump(int key, struct tty_struct *tty)
+{
+	dev_dbg(tracer.dev, "Dumping ETB buffer\n");
+	etm_dump();
+}
+
+static struct sysrq_key_op sysrq_etm_op = {
+	.handler = sysrq_etm_dump,
+	.help_msg = "ETM buffer dump",
+	.action_msg = "etm",
+};
+
+static int etb_open(struct inode *inode, struct file *file)
+{
+	if (!tracer.etb_regs)
+		return -ENODEV;
+
+	file->private_data = &tracer;
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t etb_read(struct file *file, char __user *data,
+		size_t len, loff_t *ppos)
+{
+	int total, i;
+	long length;
+	struct tracectx *t = file->private_data;
+	u32 first = 0;
+	u32 *buf;
+
+	mutex_lock(&t->mutex);
+
+	if (trace_isrunning(t)) {
+		length = 0;
+		goto out;
+	}
+
+	etb_unlock(t);
+
+	total = etb_getdatalen(t);
+	if (total == t->etb_bufsz)
+		first = etb_readl(t, ETBR_WRITEADDR);
+
+	etb_writel(t, first, ETBR_READADDR);
+
+	length = min(total * 4, (int)len);
+	buf = vmalloc(length);
+
+	dev_dbg(t->dev, "ETB buffer length: %d\n", total);
+	dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS));
+	for (i = 0; i < length / 4; i++)
+		buf[i] = etb_readl(t, ETBR_READMEM);
+
+	/* the only way to deassert overflow bit in ETB status is this */
+	etb_writel(t, 1, ETBR_CTRL);
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_writel(t, 0, ETBR_WRITEADDR);
+	etb_writel(t, 0, ETBR_READADDR);
+	etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+
+	etb_lock(t);
+
+	length -= copy_to_user(data, buf, length);
+	vfree(buf);
+
+out:
+	mutex_unlock(&t->mutex);
+
+	return length;
+}
+
+static int etb_release(struct inode *inode, struct file *file)
+{
+	/* there's nothing to do here, actually */
+	return 0;
+}
+
+static const struct file_operations etb_fops = {
+	.owner = THIS_MODULE,
+	.read = etb_read,
+	.open = etb_open,
+	.release = etb_release,
+};
+
+static struct miscdevice etb_miscdev = {
+	.name = "tracebuf",
+	.minor = 0,
+	.fops = &etb_fops,
+};
+
+static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct tracectx *t = &tracer;
+	int ret = 0;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto out;
+
+	t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+	if (!t->etb_regs) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	amba_set_drvdata(dev, t);
+
+	etb_miscdev.parent = &dev->dev;
+
+	ret = misc_register(&etb_miscdev);
+	if (ret)
+		goto out_unmap;
+
+	t->emu_clk = clk_get(&dev->dev, "emu_src_ck");
+	if (IS_ERR(t->emu_clk)) {
+		dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n");
+		return -EFAULT;
+	}
+
+	clk_enable(t->emu_clk);
+
+	etb_unlock(t);
+	t->etb_bufsz = etb_readl(t, ETBR_DEPTH);
+	dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz);
+
+	/* make sure trace capture is disabled */
+	etb_writel(t, 0, ETBR_CTRL);
+	etb_writel(t, 0x1000, ETBR_FORMATTERCTRL);
+	etb_lock(t);
+
+	dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n");
+
+out:
+	return ret;
+
+out_unmap:
+	amba_set_drvdata(dev, NULL);
+	iounmap(t->etb_regs);
+
+out_release:
+	amba_release_regions(dev);
+
+	return ret;
+}
+
+static int etb_remove(struct amba_device *dev)
+{
+	struct tracectx *t = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	iounmap(t->etb_regs);
+	t->etb_regs = NULL;
+
+	clk_disable(t->emu_clk);
+	clk_put(t->emu_clk);
+
+	amba_release_regions(dev);
+
+	return 0;
+}
+
+static struct amba_id etb_ids[] = {
+	{
+		.id	= 0x0003b907,
+		.mask	= 0x0007ffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver etb_driver = {
+	.drv		= {
+		.name	= "etb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= etb_probe,
+	.remove		= etb_remove,
+	.id_table	= etb_ids,
+};
+
+/* use a sysfs file "trace_running" to start/stop tracing */
+static ssize_t trace_running_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%x\n", trace_isrunning(&tracer));
+}
+
+static ssize_t trace_running_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned int value;
+	int ret;
+
+	if (sscanf(buf, "%u", &value) != 1)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	ret = value ? trace_start(&tracer) : trace_stop(&tracer);
+	mutex_unlock(&tracer.mutex);
+
+	return ret ? : n;
+}
+
+static struct kobj_attribute trace_running_attr =
+	__ATTR(trace_running, 0644, trace_running_show, trace_running_store);
+
+static ssize_t trace_info_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st;
+	int datalen;
+
+	etb_unlock(&tracer);
+	datalen = etb_getdatalen(&tracer);
+	etb_wa = etb_readl(&tracer, ETBR_WRITEADDR);
+	etb_ra = etb_readl(&tracer, ETBR_READADDR);
+	etb_st = etb_readl(&tracer, ETBR_STATUS);
+	etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL);
+	etb_lock(&tracer);
+
+	etm_unlock(&tracer);
+	etm_ctrl = etm_readl(&tracer, ETMR_CTRL);
+	etm_st = etm_readl(&tracer, ETMR_STATUS);
+	etm_lock(&tracer);
+
+	return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n"
+			"ETBR_WRITEADDR:\t%08x\n"
+			"ETBR_READADDR:\t%08x\n"
+			"ETBR_STATUS:\t%08x\n"
+			"ETBR_FORMATTERCTRL:\t%08x\n"
+			"ETMR_CTRL:\t%08x\n"
+			"ETMR_STATUS:\t%08x\n",
+			datalen,
+			tracer.ncmppairs,
+			etb_wa,
+			etb_ra,
+			etb_st,
+			etb_fc,
+			etm_ctrl,
+			etm_st
+			);
+}
+
+static struct kobj_attribute trace_info_attr =
+	__ATTR(trace_info, 0444, trace_info_show, NULL);
+
+static ssize_t trace_mode_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%d %d\n",
+			!!(tracer.flags & TRACER_CYCLE_ACC),
+			tracer.etm_portsz);
+}
+
+static ssize_t trace_mode_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned int cycacc, portsz;
+
+	if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	if (cycacc)
+		tracer.flags |= TRACER_CYCLE_ACC;
+	else
+		tracer.flags &= ~TRACER_CYCLE_ACC;
+
+	tracer.etm_portsz = portsz & 0x0f;
+	mutex_unlock(&tracer.mutex);
+
+	return n;
+}
+
+static struct kobj_attribute trace_mode_attr =
+	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
+
+static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct tracectx *t = &tracer;
+	int ret = 0;
+
+	if (t->etm_regs) {
+		dev_dbg(&dev->dev, "ETM already initialized\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto out;
+
+	t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+	if (!t->etm_regs) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	amba_set_drvdata(dev, t);
+
+	mutex_init(&t->mutex);
+	t->dev = &dev->dev;
+	t->flags = TRACER_CYCLE_ACC;
+	t->etm_portsz = 1;
+
+	etm_unlock(t);
+	ret = etm_readl(t, CSCR_PRSR);
+
+	t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
+	etm_writel(t, 0x440, ETMR_CTRL);
+	etm_lock(t);
+
+	ret = sysfs_create_file(&dev->dev.kobj,
+			&trace_running_attr.attr);
+	if (ret)
+		goto out_unmap;
+
+	/* failing to create any of these two is not fatal */
+	ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
+
+	ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
+
+	dev_dbg(t->dev, "ETM AMBA driver initialized.\n");
+
+out:
+	return ret;
+
+out_unmap:
+	amba_set_drvdata(dev, NULL);
+	iounmap(t->etm_regs);
+
+out_release:
+	amba_release_regions(dev);
+
+	return ret;
+}
+
+static int etm_remove(struct amba_device *dev)
+{
+	struct tracectx *t = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	iounmap(t->etm_regs);
+	t->etm_regs = NULL;
+
+	amba_release_regions(dev);
+
+	sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr);
+	sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr);
+	sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr);
+
+	return 0;
+}
+
+static struct amba_id etm_ids[] = {
+	{
+		.id	= 0x0003b921,
+		.mask	= 0x0007ffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver etm_driver = {
+	.drv		= {
+		.name   = "etm",
+		.owner  = THIS_MODULE,
+	},
+	.probe		= etm_probe,
+	.remove		= etm_remove,
+	.id_table	= etm_ids,
+};
+
+static int __init etm_init(void)
+{
+	int retval;
+
+	retval = amba_driver_register(&etb_driver);
+	if (retval) {
+		printk(KERN_ERR "Failed to register etb\n");
+		return retval;
+	}
+
+	retval = amba_driver_register(&etm_driver);
+	if (retval) {
+		amba_driver_unregister(&etb_driver);
+		printk(KERN_ERR "Failed to probe etm\n");
+		return retval;
+	}
+
+	/* not being able to install this handler is not fatal */
+	(void)register_sysrq_key('v', &sysrq_etm_op);
+
+	return 0;
+}
+
+device_initcall(etm_init);
+
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index e5dfc28..573b803 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -32,7 +32,7 @@
  * numbers for r1.
  *
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 38ccbe1..eb62bf9 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -74,7 +74,7 @@
  * crap here - that's what the boot loader (or in extreme, well justified
  * circumstances, zImage) is for.
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index 8ac9b84..3464859 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -22,47 +22,42 @@
 
 static ctl_table ctl_isa_vars[4] = {
 	{
-		.ctl_name	= BUS_ISA_MEM_BASE,
 		.procname	= "membase",
 		.data		= &isa_membase, 
 		.maxlen		= sizeof(isa_membase),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	}, {
-		.ctl_name	= BUS_ISA_PORT_BASE,
 		.procname	= "portbase",
 		.data		= &isa_portbase, 
 		.maxlen		= sizeof(isa_portbase),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	}, {
-		.ctl_name	= BUS_ISA_PORT_SHIFT,
 		.procname	= "portshift",
 		.data		= &isa_portshift, 
 		.maxlen		= sizeof(isa_portshift),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-	}, {0}
+		.proc_handler	= proc_dointvec,
+	}, {}
 };
 
 static struct ctl_table_header *isa_sysctl_header;
 
 static ctl_table ctl_isa[2] = {
 	{
-		.ctl_name	= CTL_BUS_ISA,
 		.procname	= "isa",
 		.mode		= 0555,
 		.child		= ctl_isa_vars,
-	}, {0}
+	}, {}
 };
 
 static ctl_table ctl_bus[2] = {
 	{
-		.ctl_name	= CTL_BUS,
 		.procname	= "bus",
 		.mode		= 0555,
 		.child		= ctl_isa,
-	}, {0}
+	}, {}
 };
 
 void __init
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 2a573d4..e7714f3 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -662,8 +662,12 @@
 				regs->ARM_sp -= 4;
 				usp = (u32 __user *)regs->ARM_sp;
 
-				put_user(regs->ARM_pc, usp);
-				regs->ARM_pc = KERN_RESTART_CODE;
+				if (put_user(regs->ARM_pc, usp) == 0) {
+					regs->ARM_pc = KERN_RESTART_CODE;
+				} else {
+					regs->ARM_sp += 4;
+					force_sigsegv(0, current);
+				}
 #endif
 			}
 		}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index aecf87df..71151bd 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -24,13 +24,11 @@
 #else
 	. = PAGE_OFFSET + TEXT_OFFSET;
 #endif
-	.text.head : {
-		_stext = .;
-		_sinittext = .;
-		*(.text.head)
-	}
 
 	.init : {			/* Init code and data		*/
+		_stext = .;
+		_sinittext = .;
+			HEAD_TEXT
 			INIT_TEXT
 		_einittext = .;
 		__proc_info_begin = .;
@@ -42,43 +40,31 @@
 		__tagtable_begin = .;
 			*(.taglist.init)
 		__tagtable_end = .;
-		. = ALIGN(16);
-		__setup_start = .;
-			*(.init.setup)
-		__setup_end = .;
+
+		INIT_SETUP(16)
+
 		__early_begin = .;
 			*(.early_param.init)
 		__early_end = .;
-		__initcall_start = .;
-			INITCALLS
-		__initcall_end = .;
-		__con_initcall_start = .;
-			*(.con_initcall.init)
-		__con_initcall_end = .;
-		__security_initcall_start = .;
-			*(.security_initcall.init)
-		__security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
-		. = ALIGN(32);
-		__initramfs_start = .;
-			usr/built-in.o(.init.ramfs)
-		__initramfs_end = .;
-#endif
-		. = ALIGN(PAGE_SIZE);
-		__per_cpu_load = .;
-		__per_cpu_start = .;
-			*(.data.percpu.page_aligned)
-			*(.data.percpu)
-			*(.data.percpu.shared_aligned)
-		__per_cpu_end = .;
+
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
 #endif
 	}
 
+	PERCPU(PAGE_SIZE)
+
+#ifndef CONFIG_XIP_KERNEL
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+#endif
+
 	/DISCARD/ : {			/* Exit code and data		*/
 		EXIT_TEXT
 		EXIT_DATA
@@ -157,7 +143,7 @@
 		 * first, the init task union, aligned
 		 * to an 8192 byte boundary.
 		 */
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_XIP_KERNEL
 		. = ALIGN(PAGE_SIZE);
@@ -167,17 +153,8 @@
 		__init_end = .;
 #endif
 
-		. = ALIGN(PAGE_SIZE);
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		/*
-		 * then the cacheline aligned data
-		 */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(32)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
@@ -256,20 +233,10 @@
 	}
 #endif
 
-	.bss : {
-		__bss_start = .;	/* BSS				*/
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-		_end = .;
-	}
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
 	.comment 0 : { *(.comment) }
 }
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2fd8843..0b2ee95 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,20 @@
 if ARCH_AT91
 
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+config HAVE_NAND_ATMEL_BUSWIDTH_16
+	bool
+
+config HAVE_AT91_USART3
+	bool
+
+config HAVE_AT91_USART4
+	bool
+
+config HAVE_AT91_USART5
+	bool
+
 menu "Atmel AT91 System-on-Chip"
 
 choice
@@ -10,54 +25,69 @@
 	select CPU_ARM920T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91X40
 	bool "AT91x40"
@@ -76,93 +106,88 @@
 
 config MACH_ONEARM
 	bool "Ajeco 1ARM Single Board Computer"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
 	  <http://www.ajeco.fi/products.htm>
 
 config ARCH_AT91RM9200DK
 	bool "Atmel AT91RM9200-DK Development board"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
 	  (Discontinued)
 
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
 	bool "Cogent CSB337"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB337 board.
 	  <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
 	bool "Cogent CSB637"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB637 board.
 	  <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
 	bool "Conitec ARM&EVA"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
 	  <http://www.conitec.net/english/linuxboard.htm>
 
 config MACH_ATEB9200
 	bool "Embest ATEB9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Embest's ATEB9200 board.
 	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
 config MACH_KB9200
 	bool "KwikByte KB920x"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using KwikByte's KB920x board.
 	  <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_PICOTUX2XX
 	bool "picotux 200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using a picotux 200.
 	  <http://www.picotux.com/>
 
 config MACH_KAFA
 	bool "Sperry-Sun KAFA board"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
 config MACH_ECBAT91
 	bool "emQbit ECB_AT91 SBC"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using emQbit's ECB_AT91 board.
 	  <http://wiki.emqbit.com/free-ecb-at91>
 
 config MACH_YL9200
 	bool "ucDragon YL-9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
 config MACH_CPUAT91
 	bool "Eukrea CPUAT91"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the Eukrea Electromatique's
 	  CPUAT91 board <http://www.eukrea.com/>.
 
+config MACH_ECO920
+	bool "eco920"
+	help
+	  Select this if you are using the eco920 board
+
 endif
 
 # ----------------------------------------------------------
@@ -173,7 +198,6 @@
 
 config ARCH_AT91SAM9260_SAM9XE
 	bool "AT91SAM9XE"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
 	  They are basically AT91SAM9260s with various sizes of embedded Flash.
@@ -182,28 +206,27 @@
 
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 config MACH_CAM60
 	bool "KwikByte KB9260 (CAM60) board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 	  <http://www.kwikbyte.com/KB9260.html>
 
 config MACH_SAM9_L9260
 	bool "Olimex SAM9-L9260 board"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
 config MACH_AFEB9260
 	bool "Custom afeb9260 board v1"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using custom afeb9260 board based on
 	  open hardware design. Select this for revision 1 of the board.
@@ -212,21 +235,18 @@
 
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems USB-A9260.
 	  <http://www.calao-systems.com>
 
 config MACH_QIL_A9260
 	bool "CALAO QIL-A9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
 config MACH_CPU9260
 	bool "Eukrea CPU9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9260 Board <http://www.eukrea.com/>
@@ -241,7 +261,8 @@
 
 config MACH_AT91SAM9261EK
 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9261
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -256,7 +277,8 @@
 
 config MACH_AT91SAM9G10EK
 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G10
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -271,21 +293,21 @@
 
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
 config MACH_USB_A9263
 	bool "CALAO USB-A9263"
-	depends on ARCH_AT91SAM9263
 	help
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
 config MACH_NEOCORE926
 	bool "Adeneo NEOCORE926"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
@@ -299,7 +321,6 @@
 
 config MACH_AT91SAM9RLEK
 	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9RL
 	help
 	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
@@ -313,14 +334,15 @@
 
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
 
 config MACH_AT91SAM9G20EK_2MMC
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -328,7 +350,6 @@
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
-	depends on ARCH_AT91SAM9G20
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
@@ -343,7 +364,7 @@
 
 config MACH_AT91SAM9G45EKES
 	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
-	depends on ARCH_AT91SAM9G45
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 	  "ES" at the end of the name means that this board is an
@@ -359,7 +380,8 @@
 
 config MACH_AT91CAP9ADK
 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	depends on ARCH_AT91CAP9
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -388,13 +410,13 @@
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on HAVE_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -456,15 +478,15 @@
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
+	depends on HAVE_AT91_USART3
 
 config AT91_EARLY_USART4
 	bool "USART4"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART4
 
 config AT91_EARLY_USART5
 	bool "USART5"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART5
 
 endchoice
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ada440a..709fbad 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -35,6 +35,7 @@
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
+obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -77,6 +78,7 @@
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784..a57af3e 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -131,6 +131,62 @@
 
 
 /* --------------------------------------------------------------------
+ *  USB Host HS (EHCI)
+ *  Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+
+static struct resource usbh_ehci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_EHCI_BASE,
+		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ehci_device = {
+	.name		= "atmel-ehci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ehci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ehci_data,
+	},
+	.resource	= usbh_ehci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
+};
+
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ehci_data = *data;
+	at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+	platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
new file mode 100644
index 0000000..295a966
--- /dev/null
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -0,0 +1,158 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include "generic.h"
+
+static void __init eco920_map_io(void)
+{
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+	/* DBGU on ttyS0. (Rx & Tx only */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init eco920_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eco920_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC2,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata eco920_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata eco920_udc_data = {
+	.vbus_pin	= AT91_PIN_PB12,
+	.pullup_pin	= AT91_PIN_PB13,
+};
+
+static struct at91_mmc_data __initdata eco920_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 0,
+};
+
+static struct physmap_flash_data eco920_flash_data = {
+	.width  = 2,
+};
+
+static struct resource eco920_flash_resource = {
+	.start          = 0x11000000,
+	.end            = 0x11ffffff,
+	.flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device eco920_flash = {
+	.name           = "physmap-flash",
+	.id             = 0,
+	.dev            = {
+		.platform_data  = &eco920_flash_data,
+	},
+	.resource       = &eco920_flash_resource,
+	.num_resources  = 1,
+};
+
+static struct resource at91_beeper_resources[] = {
+	[0] = {
+		.start          = AT91RM9200_BASE_TC3,
+		.end            = AT91RM9200_BASE_TC3 + 0x39,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_beeper = {
+	.name           = "at91_beeper",
+	.id             = 0,
+	.resource       = at91_beeper_resources,
+	.num_resources  = ARRAY_SIZE(at91_beeper_resources),
+};
+
+static struct spi_board_info eco920_spi_devices[] = {
+	{	/* CAN controller */
+		.modalias	= "tlv5638",
+		.chip_select	= 3,
+		.max_speed_hz	= 20 * 1000 * 1000,
+		.mode		= SPI_CPHA,
+	},
+};
+
+static void __init eco920_board_init(void)
+{
+	at91_add_device_serial();
+	at91_add_device_eth(&eco920_eth_data);
+	at91_add_device_usbh(&eco920_usbh_data);
+	at91_add_device_udc(&eco920_udc_data);
+
+	at91_add_device_mmc(0, &eco920_mmc_data);
+	platform_device_register(&eco920_flash);
+
+	at91_sys_write(AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
+				| AT91_SMC_RWSETUP_(1)
+				| AT91_SMC_DBW_8
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(15));
+
+	at91_set_A_periph(AT91_PIN_PC6, 1);
+
+	at91_set_gpio_input(AT91_PIN_PA23, 0);
+	at91_set_deglitch(AT91_PIN_PA23, 1);
+
+/* Initialization of the Static Memory Controller for Chip Select 3 */
+	at91_sys_write(AT91_SMC_CSR(3),
+		AT91_SMC_DBW_16  |	/* 16 bit */
+		AT91_SMC_WSEN    |
+		AT91_SMC_NWS_(5) |	/* wait states */
+		AT91_SMC_TDF_(1)	/* float time */
+	);
+
+	at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
+	at91_set_B_periph(AT91_PIN_PB6, 0);
+	platform_device_register(&at91_beeper);
+
+	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+}
+
+MACHINE_START(ECO920, "eco920")
+	/* Maintainer: Sascha Hauer */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= eco920_map_io,
+	.init_irq	= eco920_init_irq,
+	.init_machine	= eco920_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843..1cf4d86 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -366,6 +366,7 @@
 	at91_add_device_serial();
 	/* USB HS Host */
 	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
 	/* USB HS Device */
 	at91_add_device_usba(&ek_usba_udc_data);
 	/* SPI */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
new file mode 100644
index 0000000..1cfeac1
--- /dev/null
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -0,0 +1,94 @@
+/*
+ * based on arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle support for AT91 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <linux/io.h>
+
+#include "pm.h"
+
+#define AT91_MAX_STATES	2
+
+static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
+
+static struct cpuidle_driver at91_idle_driver = {
+	.name =         "at91_idle",
+	.owner =        THIS_MODULE,
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int at91_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+	u32 saved_lpr;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		asm("b 1f; .align 5; 1:");
+		asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
+		saved_lpr = sdram_selfrefresh_enable();
+		cpu_do_idle();
+		sdram_selfrefresh_disable(saved_lpr);
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int at91_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&at91_idle_driver);
+
+	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
+	device->state_count = AT91_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = at91_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and RAM self refresh state */
+	device->states[1].enter = at91_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "RAM_SR");
+	strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2f4fced..2295d80 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,7 @@
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724..6156689 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
 #include <mach/cpu.h>
 
 #include "generic.h"
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable()	at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable()	do {} while (0)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-
-	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-
-#else
-#include <mach/at91sam9_sdramc.h>
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define	AT91_SDRAMC	AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-
-#endif
-
+#include "pm.h"
 
 /*
  * Show the reason for the previous system reset.
@@ -260,6 +205,7 @@
 
 static int at91_pm_enter(suspend_state_t state)
 {
+	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();
 
@@ -315,9 +261,9 @@
 			 */
 			asm("b 1f; .align 5; 1:");
 			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-			sdram_selfrefresh_enable();
+			saved_lpr = sdram_selfrefresh_enable();
 			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-			sdram_selfrefresh_disable();
+			sdram_selfrefresh_disable(saved_lpr);
 			break;
 
 		case PM_SUSPEND_ON:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 0000000..08322c4
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,67 @@
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	at91_sys_write(AT91_SDRAMC_LPR, 0);
+	at91_sys_write(AT91_SDRAMC_SRR, 1);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr, lpr;
+
+	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <mach/at91sam9_sdramc.h>
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define	AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr, lpr;
+
+	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#endif
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 0da693b..fbe6fa0 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -47,10 +47,6 @@
     EXPORT_SYMBOL(bcmring_gpio_reg_lock);
 #endif
 
-/* FIXME: temporary solution */
-#define BCM_SYSCTL_REBOOT_WARM               1
-#define CTL_BCM_REBOOT                 112
-
 /* sysctl */
 int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
 
@@ -58,18 +54,16 @@
 
 static struct ctl_table bcmring_sysctl_warm_reboot[] = {
 	{
-	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
 	 .procname = "warm",
 	 .data = &bcmring_arch_warm_reboot,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec},
+	 .proc_handler = proc_dointvec},
 	{}
 };
 
 static struct ctl_table bcmring_sysctl_reboot[] = {
 	{
-	 .ctl_name = CTL_BCM_REBOOT,
 	 .procname = "reboot",
 	 .mode = 0555,
 	 .child = bcmring_sysctl_warm_reboot},
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff..dae5e9b 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
-
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
-/* happen in readw/writew etc. */
-
-#define readb(c)        __raw_readb(c)
-#define readw(c)        __raw_readw(c)
-#define readl(c)        __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p, d, l)   __raw_readsb(p, d, l)
-#define readsw(p, d, l)   __raw_readsw(p, d, l)
-#define readsl(p, d, l)   __raw_readsl(p, d, l)
-
-#define writeb(v, c)     __raw_writeb(v, c)
-#define writew(v, c)     __raw_writew(v, c)
-#define writel(v, c)     __raw_writel(v, c)
-
-#define writesb(p, d, l)  __raw_writesb(p, d, l)
-#define writesw(p, d, l)  __raw_writesw(p, d, l)
-#define writesl(p, d, l)  __raw_writesl(p, d, l)
-
-#define memset_io(c, v, l)    _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
-
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 18e4ce3..e07f70e 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -51,6 +51,14 @@
 	u32 rx_dma_offset;
 	enum dma_event_q eventq_no;	/* event queue number */
 	unsigned int codec_fmt;
+	/*
+	 * Allowing this is more efficient and eliminates left and right swaps
+	 * caused by underruns, but will swap the left and right channels
+	 * when compared to previous behavior.
+	 */
+	unsigned enable_channel_combine:1;
+	unsigned sram_size_playback;
+	unsigned sram_size_capture;
 
 	/* McASP specific fields */
 	int tdm_slots;
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
new file mode 100644
index 0000000..3b9a32a
--- /dev/null
+++ b/arch/arm/mach-dove/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+	bool "Marvell DB-MV88AP510 Development Board"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
new file mode 100644
index 0000000..7ab3be5
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile
@@ -0,0 +1,3 @@
+obj-y				+= common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
new file mode 100644
index 0000000..67039c3
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
new file mode 100644
index 0000000..00be4fc
--- /dev/null
+++ b/arch/arm/mach-dove/addr-map.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0x0
+#define TARGET_BOOTROM		0x1
+#define TARGET_CESA		0x3
+#define TARGET_PCIE0		0x4
+#define TARGET_PCIE1		0x8
+#define TARGET_SCRATCHPAD	0xd
+
+#define ATTR_CESA		0x01
+#define ATTR_BOOTROM		0xfd
+#define ATTR_DEV_SPI0_ROM	0xfe
+#define ATTR_DEV_SPI1_ROM	0xfb
+#define ATTR_PCIE_IO		0xe0
+#define ATTR_PCIE_MEM		0xe8
+#define ATTR_SCRATCHPAD		0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+	if (win < 4)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, WIN_BASE(win));
+	writel(ctrl, WIN_CTRL(win));
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+		writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+		writel(0, WIN_REMAP_HI(win));
+	}
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel(0, WIN_BASE(i));
+		writel(0, WIN_CTRL(i));
+		if (cpu_win_can_remap(i)) {
+			writel(0, WIN_REMAP_LO(i));
+			writel(0, WIN_REMAP_HI(i));
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+	setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup window for CESA engine.
+	 */
+	setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+		      TARGET_CESA, ATTR_CESA, -1);
+
+	/*
+	 * Setup the Window to the BootROM for Standby and Sleep Resume
+	 */
+	setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+		      TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+	/*
+	 * Setup the Window to the PMU Scratch Pad space
+	 */
+	setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+		      TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 2; i++) {
+		u32 map = readl(ddr_map_sc(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (map & 1) {
+			struct mbus_dram_window *w;
+
+			w = &dove_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0; /* CS address decoding done inside */
+					  /* the DDR controller, no need to  */
+					  /* provide attributes */
+			w->base = map & 0xff800000;
+			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+		}
+	}
+	dove_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
new file mode 100644
index 0000000..806972a
--- /dev/null
+++ b/arch/arm/mach-dove/common.c
@@ -0,0 +1,781 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+	{
+		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+		.length		= DOVE_SB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+		.length		= DOVE_NB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+		.length		= DOVE_PCIE0_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+		.length		= DOVE_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init dove_map_io(void)
+{
+	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+	.dram		= &dove_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+	{
+		.start	= DOVE_USB0_PHYS_BASE,
+		.end	= DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB0,
+		.end	= IRQ_DOVE_USB0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+	platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+	{
+		.start	= DOVE_USB1_PHYS_BASE,
+		.end	= DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB1,
+		.end	= IRQ_DOVE_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+	platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+	.t_clk		= 0,
+	.dram		= &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= DOVE_GE00_PHYS_BASE + 0x2000,
+		.end	= DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &dove_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_DOVE_GE00_SUM,
+		.end	= IRQ_DOVE_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= dove_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &dove_ge00_shared;
+	dove_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&dove_ge00_shared);
+	platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+	{
+		.start	= DOVE_RTC_PHYS_BASE,
+		.end	= DOVE_RTC_PHYS_BASE + 32 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_RTC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+void __init dove_rtc_init(void)
+{
+	platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= DOVE_SATA_PHYS_BASE,
+		.end	= DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_DOVE_SATA,
+		.end	= IRQ_DOVE_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(dove_sata_resources),
+	.resource	= dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &dove_mbus_dram_info;
+	dove_sata.dev.platform_data = sata_data;
+	platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+	{
+		.mapbase	= DOVE_UART0_PHYS_BASE,
+		.membase	= (char *)DOVE_UART0_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart0_resources[] = {
+	{
+		.start		= DOVE_UART0_PHYS_BASE,
+		.end		= DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_0,
+		.end		= IRQ_DOVE_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= dove_uart0_data,
+	},
+	.resource		= dove_uart0_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+	platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+	{
+		.mapbase	= DOVE_UART1_PHYS_BASE,
+		.membase	= (char *)DOVE_UART1_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart1_resources[] = {
+	{
+		.start		= DOVE_UART1_PHYS_BASE,
+		.end		= DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_1,
+		.end		= IRQ_DOVE_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= dove_uart1_data,
+	},
+	.resource		= dove_uart1_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+	platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+	{
+		.mapbase	= DOVE_UART2_PHYS_BASE,
+		.membase	= (char *)DOVE_UART2_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_2,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart2_resources[] = {
+	{
+		.start		= DOVE_UART2_PHYS_BASE,
+		.end		= DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_2,
+		.end		= IRQ_DOVE_UART_2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart2 = {
+	.name			= "serial8250",
+	.id			= 2,
+	.dev			= {
+		.platform_data	= dove_uart2_data,
+	},
+	.resource		= dove_uart2_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+	platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+	{
+		.mapbase	= DOVE_UART3_PHYS_BASE,
+		.membase	= (char *)DOVE_UART3_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_3,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart3_resources[] = {
+	{
+		.start		= DOVE_UART3_PHYS_BASE,
+		.end		= DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_3,
+		.end		= IRQ_DOVE_UART_3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart3 = {
+	.name			= "serial8250",
+	.id			= 3,
+	.dev			= {
+		.platform_data	= dove_uart3_data,
+	},
+	.resource		= dove_uart3_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+	platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+	{
+		.start	= DOVE_SPI0_PHYS_BASE,
+		.end	= DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI0,
+		.end	= IRQ_DOVE_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi0 = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= dove_spi0_resources,
+	.dev		= {
+		.platform_data	= &dove_spi0_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+	platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+	{
+		.start	= DOVE_SPI1_PHYS_BASE,
+		.end	= DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI1,
+		.end	= IRQ_DOVE_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi1 = {
+	.name		= "orion_spi",
+	.id		= 1,
+	.resource	= dove_spi1_resources,
+	.dev		= {
+		.platform_data	= &dove_spi1_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+	platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+	.freq_m		= 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+	{
+		.name	= "i2c base",
+		.start	= DOVE_I2C_PHYS_BASE,
+		.end	= DOVE_I2C_PHYS_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c irq",
+		.start	= IRQ_DOVE_I2C,
+		.end	= IRQ_DOVE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_i2c_resources),
+	.resource	= dove_i2c_resources,
+	.dev		= {
+		.platform_data = &dove_i2c_data,
+	},
+};
+
+void __init dove_i2c_init(void)
+{
+	platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+	return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+	orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+	.init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+	.dram		= &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR0_PHYS_BASE,
+		.end	= DOVE_XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR0_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor0_shared_resources),
+	.resource	= dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_00,
+		.end	= IRQ_DOVE_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_xor00_resources),
+	.resource	= dove_xor00_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor00_data,
+	},
+};
+
+static struct resource dove_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_01,
+		.end	= IRQ_DOVE_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dove_xor01_resources),
+	.resource	= dove_xor01_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor01_data,
+	},
+};
+
+void __init dove_xor0_init(void)
+{
+	platform_device_register(&dove_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+	platform_device_register(&dove_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+	platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR1_PHYS_BASE,
+		.end	= DOVE_XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR1_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor1_shared_resources),
+	.resource	= dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_10,
+		.end	= IRQ_DOVE_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(dove_xor10_resources),
+	.resource	= dove_xor10_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor10_data,
+	},
+};
+
+static struct resource dove_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_11,
+		.end	= IRQ_DOVE_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(dove_xor11_resources),
+	.resource	= dove_xor11_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor11_data,
+	},
+};
+
+void __init dove_xor1_init(void)
+{
+	platform_device_register(&dove_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+	platform_device_register(&dove_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+	platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+	int tclk;
+
+	tclk = get_tclk();
+
+	printk(KERN_INFO "Dove 88AP510 SoC, ");
+	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	dove_ge00_shared_data.t_clk = tclk;
+	dove_uart0_data[0].uartclk = tclk;
+	dove_uart1_data[0].uartclk = tclk;
+	dove_uart2_data[0].uartclk = tclk;
+	dove_uart3_data[0].uartclk = tclk;
+	dove_spi0_data.tclk = tclk;
+	dove_spi1_data.tclk = tclk;
+
+	/* internal devices that every board has */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
new file mode 100644
index 0000000..b29e893
--- /dev/null
+++ b/arch/arm/mach-dove/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 0000000..f2971b7
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+	.n_ports        = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * 	SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+	.type		= "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &dove_db_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+	if (machine_is_dove_db())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&dove_db_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&dove_db_sata_data);
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(dove_db_spi_flash_info,
+				ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
+	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dove_db_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 0000000..214a4c3
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define  CPU_CTRL_PCIE0_LINK	0x00000001
+#define  CPU_RESET		0x00000002
+#define  CPU_CTRL_PCIE1_LINK	0x00000008
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define  SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define  SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define FIQ_MASK_LOW_OFF	0x0008
+#define ENDPOINT_MASK_LOW_OFF	0x000c
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+#define FIQ_MASK_HIGH_OFF	0x0018
+#define ENDPOINT_MASK_HIGH_OFF	0x001c
+#define PCIE_INTERRUPT_MASK_OFF	0x0020
+
+#define IRQ_MASK_LOW		(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW		(IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW	(IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH		(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH		(IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 0000000..9b89ec7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
+	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 0000000..f6a0839
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys		virt		size
+ * c8000000	fdb00000	1M	Cryptographic SRAM
+ * e0000000	@runtime	128M	PCIe-0 Memory space
+ * e8000000	@runtime	128M	PCIe-1 Memory space
+ * f1000000	fde00000	8M	on-chip south-bridge registers
+ * f1800000	fe600000	8M	on-chip north-bridge registers
+ * f2000000	fee00000	1M	PCIe-0 I/O space
+ * f2100000	fef00000	1M	PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE		0xc8000000
+#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_SIZE			SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define DOVE_PCIE0_MEM_SIZE		SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define DOVE_PCIE1_MEM_SIZE		SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE		0xf8000000
+#define DOVE_BOOTROM_SIZE		SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE		SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE		0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_SIZE		SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE		0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_SIZE		SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE		0x00000000
+#define DOVE_PCIE0_IO_SIZE		SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
+#define DOVE_PCIE1_IO_SIZE		SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
+#define  DOVE_NAND_GPIO_EN		(1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
+#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
+#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		(1 << 0)
+#define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
+#define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 0000000..e84c78c
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 0000000..0ee70ff
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX	64
+
+#define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	if (pin < NR_GPIO_IRQS)
+		return pin + IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 0000000..32b0826
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x1000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver.	*/
+#define __REG(x)	(*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+				DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x)	(((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+		DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 0000000..3b3e472
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+				   DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 0000000..4668146
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE		0
+#define IRQ_DOVE_H2C		1
+#define IRQ_DOVE_C2H		2
+#define IRQ_DOVE_NAND		3
+#define IRQ_DOVE_PDMA		4
+#define IRQ_DOVE_SPI1		5
+#define IRQ_DOVE_SPI0		6
+#define IRQ_DOVE_UART_0		7
+#define IRQ_DOVE_UART_1		8
+#define IRQ_DOVE_UART_2		9
+#define IRQ_DOVE_UART_3		10
+#define IRQ_DOVE_I2C		11
+#define IRQ_DOVE_GPIO_0_7	12
+#define IRQ_DOVE_GPIO_8_15	13
+#define IRQ_DOVE_GPIO_16_23	14
+#define IRQ_DOVE_PCIE0_ERR	15
+#define IRQ_DOVE_PCIE0		16
+#define IRQ_DOVE_PCIE1_ERR	17
+#define IRQ_DOVE_PCIE1		18
+#define IRQ_DOVE_I2S0		19
+#define IRQ_DOVE_I2S0_ERR	20
+#define IRQ_DOVE_I2S1		21
+#define IRQ_DOVE_I2S1_ERR	22
+#define IRQ_DOVE_USB_ERR	23
+#define IRQ_DOVE_USB0		24
+#define IRQ_DOVE_USB1		25
+#define IRQ_DOVE_GE00_RX	26
+#define IRQ_DOVE_GE00_TX	27
+#define IRQ_DOVE_GE00_MISC	28
+#define IRQ_DOVE_GE00_SUM	29
+#define IRQ_DOVE_GE00_ERR	30
+#define IRQ_DOVE_CRYPTO		31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97		32
+#define IRQ_DOVE_PMU		33
+#define IRQ_DOVE_CAM		34
+#define IRQ_DOVE_SDIO0		35
+#define IRQ_DOVE_SDIO1		36
+#define IRQ_DOVE_SDIO0_WAKEUP	37
+#define IRQ_DOVE_SDIO1_WAKEUP	38
+#define IRQ_DOVE_XOR_00		39
+#define IRQ_DOVE_XOR_01		40
+#define IRQ_DOVE_XOR0_ERR	41
+#define IRQ_DOVE_XOR_10		42
+#define IRQ_DOVE_XOR_11		43
+#define IRQ_DOVE_XOR1_ERR	44
+#define IRQ_DOVE_LCD_DCON	45
+#define IRQ_DOVE_LCD1		46
+#define IRQ_DOVE_LCD0		47
+#define IRQ_DOVE_GPU		48
+#define IRQ_DOVE_PERFORM_MNTR	49
+#define IRQ_DOVE_VPRO_DMA1	51
+#define IRQ_DOVE_SSP_TIMER	54
+#define IRQ_DOVE_SSP		55
+#define IRQ_DOVE_MC_L2_ERR	56
+#define IRQ_DOVE_CRYPTO_ERR	59
+#define IRQ_DOVE_GPIO_24_31	60
+#define IRQ_DOVE_HIGH_GPIO	61
+#define IRQ_DOVE_SATA		62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START	64
+#define NR_GPIO_IRQS		64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START	(IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS		7
+#define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver.	*/
+#define IRQ_AC97		IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver.	*/
+#define IRQ_DMA			IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver 	*/
+#define IRQ_NAND		IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 0000000..d668720
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 0000000..3ad9f94
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
+#define  CLOCK_GATING_USB0_MASK		(1 << 0)
+#define  CLOCK_GATING_USB1_MASK		(1 << 1)
+#define  CLOCK_GATING_GBE_MASK		(1 << 2)
+#define  CLOCK_GATING_SATA_MASK		(1 << 3)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
+#define  CLOCK_GATING_NAND_MASK		(1 << 10)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
+#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
+#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
+#define  CLOCK_GATING_AC97_MASK		(1 << 21)
+#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
+#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
+#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+
+#define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+	if (pin < NR_PMU_IRQS)
+		return pin + IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 0000000..356afda
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 0000000..251d538
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 0000000..2c5cdd7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE	0x20
+
+static void putc(const char c)
+{
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		/* Transmit fifo not full? */
+		if (*UART_LSR & LSR_THRE)
+			break;
+	}
+
+	*UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 0000000..8b2c974
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfd800000
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
new file mode 100644
index 0000000..61bfcb3
--- /dev/null
+++ b/arch/arm/mach-dove/irq.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int irqoff;
+	BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+	irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+		3 + irq - IRQ_DOVE_GPIO_24_31;
+
+	orion_gpio_irq_handler(irqoff << 3);
+	if (irq == IRQ_DOVE_HIGH_GPIO) {
+		orion_gpio_irq_handler(40);
+		orion_gpio_irq_handler(48);
+		orion_gpio_irq_handler(56);
+	}
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u &= ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u |= 1 << (pin & 31);
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+	.name		= "pmu_irq",
+	.mask		= pmu_irq_mask,
+	.unmask		= pmu_irq_unmask,
+	.ack		= pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+	cause &= readl(PMU_INTERRUPT_MASK);
+	if (cause == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+		if (!(cause & (1 << irq)))
+			continue;
+		irq = pmu_to_irq(irq);
+		desc = irq_desc + irq;
+		desc_handle_irq(irq, desc);
+	}
+}
+
+void __init dove_init_irq(void)
+{
+	int i;
+
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+
+	/*
+	 * Mask and clear PMU interrupts
+	 */
+	writel(0, PMU_INTERRUPT_MASK);
+	writel(0, PMU_INTERRUPT_CAUSE);
+
+	for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+		set_irq_chip(i, &orion_gpio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &pmu_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
new file mode 100644
index 0000000..502d1ca
--- /dev/null
+++ b/arch/arm/mach-dove/pcie.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+	u8			index;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	struct resource		res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+		 "PCIe %d I/O", pp->index);
+	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+	pp->res[0].name = pp->io_space_name;
+	if (pp->index == 0) {
+		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+	} else {
+		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+	}
+	pp->res[0].flags = IORESOURCE_IO;
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &pp->res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+		 "PCIe %d MEM", pp->index);
+	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+	pp->res[1].name = pp->mem_space_name;
+	if (pp->index == 0) {
+		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+	} else {
+		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+	}
+	pp->res[1].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &pp->res[1];
+
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = num_pcie_ports - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr < num_pcie_ports) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= dove_pcie_setup,
+	.scan		= dove_pcie_scan_bus,
+	.map_irq	= dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+	printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk(KERN_INFO "link up\n");
+
+		pp->index = index;
+		pp->root_bus_nr = -1;
+		pp->base = (void __iomem *)base;
+		spin_lock_init(&pp->conf_lock);
+		memset(pp->res, 0, sizeof(pp->res));
+	} else {
+		printk(KERN_INFO "link down, ignoring\n");
+	}
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+	if (init_port0)
+		add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+	if (init_port1)
+		add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+	pci_common_init(&dove_pci);
+}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b4357c3..1f0d665 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -728,6 +729,82 @@
 	platform_device_register(&ep93xx_fb_device);
 }
 
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+	{
+		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
+		.end	= EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_KEY,
+		.end	= IRQ_EP93XX_KEY,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_keypad_device = {
+	.name			= "ep93xx-keypad",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(ep93xx_keypad_resource),
+	.resource		= ep93xx_keypad_resource,
+};
+
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+	ep93xx_keypad_device.dev.platform_data = data;
+	platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+		if (err)
+			goto fail_gpio_c;
+		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+		if (err)
+			goto fail_gpio_d;
+	}
+
+	/* Enable the keypad controller; GPIO ports C and D used for keypad */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+				 EP93XX_SYSCON_DEVCFG_GONK);
+
+	return 0;
+
+fail_gpio_d:
+	gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+	for ( ; i >= 0; --i) {
+		gpio_free(EP93XX_GPIO_LINE_C(i));
+		gpio_free(EP93XX_GPIO_LINE_D(i));
+	}
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		gpio_free(EP93XX_GPIO_LINE_C(i));
+		gpio_free(EP93XX_GPIO_LINE_D(i));
+	}
+
+	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+			       EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a8..50cb991 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
+
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d..3a5961d 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
+
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937e..d55194a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
 #define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
+#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7c..5a3ce02 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/hardware.h
  */
+
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c..594b77f 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+
 #ifndef __ASM_MACH_IO_H
 #define __ASM_MACH_IO_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 469fd96..c6dc14db 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
 
 struct ep93xx_eth_data
 {
@@ -39,6 +40,9 @@
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b..25b1da9 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@
 		(dma_addr_t)page_to_phys(page);				\
 	})
 
+#define __arch_dma_to_page(dev, addr)	phys_to_page(addr)
+
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index d6d5252..f1c00d6 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -20,7 +20,6 @@
 #define IOP13XX_CORE_FREQ_1200		(5 << 16)
 
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
 
 static inline unsigned long iop13xx_core_freq(void)
 {
@@ -66,6 +65,13 @@
 	return 2;
 }
 
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
+	return val;
+}
+
 static inline void write_tmr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
@@ -83,6 +89,11 @@
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -90,6 +101,11 @@
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 5051c03..f91f315 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -87,7 +87,6 @@
 
 static struct sys_timer iq81340mc_timer = {
        .init       = iq81340mc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index bc44307..ddb7a34 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -89,7 +89,6 @@
 
 static struct sys_timer iq81340sc_timer = {
        .init       = iq81340sc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 3ad4696..2bef9b6 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -42,7 +42,6 @@
 
 static struct sys_timer em7210_timer = {
 	.init		= em7210_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 /*
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index a9c2dfd..93370a4 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -47,7 +47,6 @@
 
 static struct sys_timer glantank_timer = {
 	.init		= glantank_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index dd1cd99..a7a08dd 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -78,7 +78,6 @@
 
 static struct sys_timer iq31244_timer = {
 	.init		= iq31244_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index fbe2779..0200f80 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -46,7 +46,6 @@
 
 static struct sys_timer iq80321_timer = {
 	.init		= iq80321_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d2e4278..2a5c6376 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -53,7 +53,6 @@
 
 static struct sys_timer n2100_timer = {
 	.init		= n2100_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index d51e10c..394e95a 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -48,7 +48,6 @@
 
 static struct sys_timer iq80331_timer = {
 	.init		= iq80331_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 92fb44c..a40badf 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -48,7 +48,6 @@
 
 static struct sys_timer iq80332_timer = {
 	.init		= iq80332_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 0aca451..8bf09ae 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -33,10 +33,18 @@
 	  Marvell SheevaPlug Reference Board.
 
 config MACH_TS219
-	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-119 and TS-219 Turbo NAS devices.
+	  QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+	  devices.
+
+config MACH_TS41X
+	bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+	  devices.
 
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 80ab0ec..9f2f67b 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,7 +5,8 @@
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index ec1a64f..2830f0f 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -1,6 +1,6 @@
 /*
  *
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
  *
  * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
- *     the QNAP firmware.
- * Layout as used by QNAP:
- *  0x00000000-0x00080000 : "U-Boot"
- *  0x00200000-0x00400000 : "Kernel"
- *  0x00400000-0x00d00000 : "RootFS"
- *  0x00d00000-0x01000000 : "RootFS2"
- *  0x00080000-0x000c0000 : "U-Boot Config"
- *  0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00900000,
-		.offset		= 0x00400000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00300000,
-		.offset		= 0x00d00000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00040000,
-		.offset		= 0x00080000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00140000,
-		.offset		= 0x000c0000,
-	},
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
-	.type		= "m25p128",
-	.name		= "spi_flash",
-	.parts		= qnap_ts219_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &qnap_ts219_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "tsx1x-common.h"
 
 static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	0
 };
 
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack UART1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
 static void __init qnap_ts219_init(void)
 {
 	/*
@@ -192,9 +96,7 @@
 
 	kirkwood_uart0_init();
 	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	spi_register_board_info(qnap_ts219_spi_slave_info,
-				ARRAY_SIZE(qnap_ts219_spi_slave_info));
-	kirkwood_spi_init();
+	qnap_tsx1x_register_flash();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@
 	kirkwood_ehci_init();
 	platform_device_register(&qnap_ts219_button_device);
 
-	pm_power_off = qnap_ts219_power_off;
+	pm_power_off = qnap_tsx1x_power_off;
 
 }
 
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
new file mode 100644
index 0000000..de49c2d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -0,0 +1,154 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 43,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 37,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+	.buttons	= qnap_ts41x_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts41x_button_data,
+	}
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button */
+	MPP43_GPIO,		/* USB Copy button */
+	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
+	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP46_GPIO,		/* External SATA HDD1 error indicator */
+	MPP47_GPIO,		/* External SATA HDD2 error indicator */
+	MPP48_GPIO,		/* External SATA HDD3 error indicator */
+	MPP49_GPIO,		/* External SATA HDD4 error indicator */
+	0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+	kirkwood_sata_init(&qnap_ts41x_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts41x_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+	if (machine_is_ts41x())
+		kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts41x_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
new file mode 100644
index 0000000..7221c20
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_tsx1x_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_tsx1x_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+	spi_register_board_info(qnap_tsx1x_spi_slave_info,
+				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
new file mode 100644
index 0000000..9a59296
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308..ffa19aa 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@
 		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
 	   __dma; })
 
+#define __arch_dma_to_page(dev, x)	\
+	({ dma_addr_t __dma = x;				\
+	   if (!is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - KS8695_PCIMEM_PA;	\
+	   phys_to_page(__dma);					\
+	})
+
 #endif
 
 #endif
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 4562452..a2d307e 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -13,6 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -85,12 +88,48 @@
 	.resource	= smc91x_resources,
 };
 
+static struct mtd_partition aspenite_nand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct pxa3xx_nand_platform_data aspenite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 2d9cc5a..2a46ed5 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -34,6 +34,21 @@
 	.disable	= apbc_clk_disable,
 };
 
+static void apmu_clk_enable(struct clk *clk)
+{
+	__raw_writel(clk->enable_val, clk->clk_rst);
+}
+
+static void apmu_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apmu_clk_ops = {
+	.enable		= apmu_clk_enable,
+	.disable	= apmu_clk_disable,
+};
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index ed967e7..eefffbe 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -25,6 +25,7 @@
 };
 
 extern struct clkops apbc_clk_ops;
+extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index 16295cf..d68871b 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -31,7 +31,9 @@
 #define IRQ_PXA168_DDR_INT		26
 #define IRQ_PXA168_UART1		27
 #define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_UART3		29
 #define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_MAIN_PMU		36
 #define IRQ_PXA168_FRQ_CHANGE		38
 #define IRQ_PXA168_SDH1			39
 #define IRQ_PXA168_SDH2			40
@@ -46,7 +48,7 @@
 #define IRQ_PXA168_USB2			51
 #define IRQ_PXA168_AC97			57
 #define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_AP_PMU		60
 #define IRQ_PXA168_SM_INT		63
 
 /*
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 6bf1f0e..3ad612c 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -13,6 +14,7 @@
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -64,4 +66,9 @@
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 6ae1ed7..4f0b4ec 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
@@ -13,6 +14,7 @@
 extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
+extern struct pxa_device_desc pxa910_device_nand;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -64,4 +66,9 @@
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 71b1ae3..37dbdde 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -19,6 +19,7 @@
 #include <mach/addr-map.h>
 #include <mach/cputype.h>
 #include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/dma.h>
@@ -72,6 +73,8 @@
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -82,6 +85,7 @@
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -127,3 +131,4 @@
 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 5882ca6..d404950 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -110,6 +110,8 @@
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -120,6 +122,7 @@
 	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -174,3 +177,4 @@
 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 08cfef6..8f49b2b 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -11,9 +11,13 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
@@ -26,6 +30,86 @@
 	/* UART2 */
 	GPIO47_UART2_RXD,
 	GPIO48_UART2_TXD,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct mtd_partition ttc_dkb_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data ttc_dkb_onenand_info = {
+	.parts		= ttc_dkb_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
+};
+
+static struct resource ttc_dkb_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ttc_dkb_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= ttc_dkb_resource_onenand,
+	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
+	.dev		= {
+		.platform_data	= &ttc_dkb_onenand_info,
+	},
+};
+
+static struct platform_device *ttc_dkb_devices[] = {
+	&ttc_dkb_device_onenand,
 };
 
 static void __init ttc_dkb_init(void)
@@ -34,6 +118,9 @@
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c8a2eac..b96c6a3 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -6,11 +6,13 @@
 
 config MACH_MX21
 	bool "i.MX21 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -102,4 +104,11 @@
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	depends on MACH_MX27
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 19560f0..52aca0aa 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -20,4 +20,5 @@
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
 
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index eede798..91901b5 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1000,7 +1000,7 @@
 	clk_enable(&per_clk[0]);
 	clk_enable(&gpio_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart_clk[0]);
 #endif
 
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index ff5e332..b010bf9 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -651,8 +651,8 @@
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)
@@ -751,7 +751,7 @@
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart1_clk);
 #endif
 
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 50199af..3d398ce 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -530,6 +530,84 @@
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI1,
+		.end	= MXC_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI1_TX0,
+		.end	= DMA_REQ_SSI1_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI1_RX0,
+		.end	= DMA_REQ_SSI1_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI1_TX1,
+		.end	= DMA_REQ_SSI1_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI1_RX1,
+		.end	= DMA_REQ_SSI1_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI2,
+		.end	= MXC_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI2_TX0,
+		.end	= DMA_REQ_SSI2_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI2_RX0,
+		.end	= DMA_REQ_SSI2_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI2_TX1,
+		.end	= DMA_REQ_SSI2_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI2_RX1,
+		.end	= DMA_REQ_SSI2_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index d315406..97306aa 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -26,4 +26,5 @@
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
-
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
new file mode 100644
index 0000000..03dbbdc
--- /dev/null
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -0,0 +1,319 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA25_PF_CLS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	PF8_AF_ATA_IORDY,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+	.bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+				unsigned gpio_base, unsigned ngpio,
+				void *context)
+{
+	static int mxt_td60_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+		if (mxt_td60_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+						mxt_td60_gpio_value[n]);
+		gpio_export(gpio_base + n, 0);
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
+	.invert		= 0, /* Do not invert */
+	.setup		= mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9557", 0x18),
+		.platform_data = &mxt_td60_pca9557_pdata,
+	},
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+	{
+		.mode = {
+			.name		= "Chimei LW700AT9003",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30303,
+			.hsync_len	= 64,
+			.left_margin	= 0x67,
+			.right_margin	= 0x68,
+			.vsync_len	= 16,
+			.upper_margin	= 0x0f,
+			.lower_margin	= 0x0f,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFA208B83,
+	},
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+	.mode = mxt_td60_modes,
+	.num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+				"sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mxt_td60_sdhc1_init,
+	.exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mxt_td60_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+			"MXT_TD60");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+
+	i2c_register_board_info(0, mxt_td60_i2c_devices,
+				ARRAY_SIZE(mxt_td60_i2c_devices));
+
+	i2c_register_board_info(1, mxt_td60_i2c2_devices,
+				ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+	.init	= mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+	/* maintainer: Maxtrack Industrial */
+	.phys_io	= AIPI_BASE_ADDR,
+	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx27_map_io,
+	.init_irq	= mx27_init_irq,
+	.init_machine	= mxt_td60_board_init,
+	.timer		= &mxt_td60_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
index fe5b165..aea3d34 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/pca100.c
@@ -237,7 +237,7 @@
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,
 	.timer          = &pca100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 851f245..ea8ed10 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -2,11 +2,13 @@
 
 config ARCH_MX31
 	select ARCH_HAS_RNGA
+	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
 
 comment "MX3 platforms:"
 
@@ -61,6 +63,7 @@
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select MXC_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -100,4 +103,12 @@
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select ARCH_MX31
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 6b97754..93c7b29 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= mm.o devices.o
+obj-y				:= mm.o devices.o cpu.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
@@ -19,3 +19,4 @@
 obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 776c0ee..54aab40 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -97,6 +100,47 @@
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &armadillo5x0_button_data,
+	}
 };
 
 /*
@@ -278,7 +322,7 @@
 };
 
 static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT,
+	.flags		= SMSC911X_USE_16BIT,
 	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 };
@@ -300,6 +344,8 @@
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
+	&mxc_i2c_device1,
+	&armadillo5x0_button_device,
 };
 
 /*
@@ -335,6 +381,18 @@
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }
 
 static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index c595260..7584b4c 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -335,7 +335,7 @@
 
 DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
 DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
 DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
 DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
@@ -381,12 +381,43 @@
 DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
 
 DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
 DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
 DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 
+DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
+
+static int clk_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long div1;
+
+	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+	return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+	.id		= 0,
+	.enable_reg	= 0,
+	.enable_shift	= 0,
+	.get_rate	= get_rate_nfc,
+	.set_rate	= NULL, /* set_rate_nfc, */
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable
+};
+
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
 		.dev_id = d,		\
@@ -397,7 +428,6 @@
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "can", can1_clk)
 	_REGISTER_CLOCK(NULL, "can", can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@@ -434,8 +464,8 @@
 	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -443,12 +473,14 @@
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 };
 
 int __init mx35_clocks_init()
@@ -456,7 +488,7 @@
 	int i;
 	unsigned int ll = 0;
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	ll = (3 << 16);
 #endif
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b2a3bcf..27a318a 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -558,8 +558,8 @@
 	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK(NULL, "firi", firi_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@@ -616,6 +616,8 @@
 
 	clk_enable(&serial_pll_clk);
 
+	mx31_read_cpu_rev();
+
 	if (mx31_revision() >= CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
new file mode 100644
index 0000000..db82880
--- /dev/null
+++ b/arch/arm/mach-mx3/cpu.c
@@ -0,0 +1,57 @@
+/*
+ * MX3 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+struct mx3_cpu_type {
+	u8 srev;
+	const char *name;
+	const char *v;
+	unsigned int rev;
+};
+
+static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			printk(KERN_INFO
+				"CPU identified as %s, silicon rev %s\n",
+				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+			mx31_cpu_rev = mx31_cpu_type[i].rev;
+			return;
+		}
+
+	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index e6abe18..6adb586 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -537,6 +537,44 @@
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX31_INT_SSI1,
+		.end	= MX31_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX31_INT_SSI2,
+		.end	= MX31_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 static int mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
@@ -546,7 +584,7 @@
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -555,6 +593,10 @@
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+		imx_ssi_resources0[1].start = MX35_INT_SSI1;
+		imx_ssi_resources0[1].end = MX35_INT_SSI1;
+		imx_ssi_resources1[1].start = MX35_INT_SSI2;
+		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ab87419..42cf175 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -23,4 +23,6 @@
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
 
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c
new file mode 100644
index 0000000..6fa99ce
--- /dev/null
+++ b/arch/arm/mach-mx3/kzmarm11.c
@@ -0,0 +1,268 @@
+/*
+ * KZM-ARM11-01 support
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.mapbase	= KZM_ARM11_16550,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.irqflags	= IRQ_TYPE_EDGE_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 0,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_BUGGY_UART,
+	},
+	{},
+};
+
+static struct resource serial8250_resources[] = {
+	{
+		.start	= KZM_ARM11_16550,
+		.end	= KZM_ARM11_16550 + 0x10,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+				.platform_data = serial_platform_data,
+			  },
+	.num_resources	= ARRAY_SIZE(serial8250_resources),
+	.resource	= serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+	u8 tmp;
+
+	/*
+	 * GPIO 1-1: external UART interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/*
+	 * Unmask UART interrupt
+	 */
+	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp |= 0x2;
+	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+	{
+		.start	= CS5_BASE_ADDR,
+		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device kzm_smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
+	.resource	= kzm_smsc9118_resources,
+	.dev		= {
+				.platform_data = &kzm_smsc9118_config,
+			  },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+	/*
+	 * GPIO 1-2: SMSC9118 interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+	return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_DCD_DCE1__DCD_DCE1,
+	MX31_PIN_RI_DCE1__RI_DCE1,
+	MX31_PIN_DSR_DCE1__DSR_DCE1,
+	MX31_PIN_DTR_DCE1__DTR_DCE1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_DCD_DTE1__DCD_DTE2,
+	MX31_PIN_RI_DTE1__RI_DTE2,
+	MX31_PIN_DSR_DTE1__DSR_DTE2,
+	MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(kzm_pins,
+				      ARRAY_SIZE(kzm_pins), "kzm");
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+	kzm_init_imx_uart();
+
+	pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+	{
+		.virtual	= CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
+		.length		= CS4_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
+		.length		= CS5_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+	.init   = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = kzm_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = kzm_board_init,
+	.timer          = &kzm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 3b3a78f..7aebd74 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -109,6 +109,9 @@
 
 static int gpio_det, gpio_wp;
 
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 static int mxc_mmc1_init(struct device *dev,
 			 irq_handler_t detect_irq, void *data)
 {
@@ -117,6 +120,13 @@
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
 
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
 		return ret;
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 4230251..9ce029f 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -108,7 +111,36 @@
 static struct platform_device *devices[] __initdata = {
 	&smsc91x_device,
 	&physmap_flash_device,
-	&mxc_i2c_device1,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
 };
 
 static int mx31lilly_baseboard;
@@ -128,8 +160,27 @@
 	}
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
new file mode 100644
index 0000000..694611d
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -0,0 +1,198 @@
+/*
+ *  LogicPD i.MX31 SOM-LV development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	 = mxc_mmc1_get_ro,
+	.init	   = mxc_mmc1_init,
+	.exit	   = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+	{
+		.name           = "GPIO0",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name           = "GPIO1",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+	.leds           = litekit_leds,
+	.num_leds       = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &litekit_led_platform_data,
+	},
+};
+
+void __init mx31lite_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+					ARRAY_SIZE(litekit_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	platform_device_register(&litekit_led_device);
+}
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index a8d57de..def6b67 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -2,6 +2,7 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,38 +26,47 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
 #include "devices.h"
 
 /*
- * This file contains the board-specific initialization routines.
+ * This file contains the module-specific initialization routines.
  */
 
 static unsigned int mx31lite_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
 };
 
 static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -93,6 +103,111 @@
 };
 
 /*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13783_USE_RTC |
+		  MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/*
  * This structure defines the MX31 memory map.
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
@@ -118,19 +233,40 @@
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
-/*
- * Board specific initialization.
- */
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
 static void __init mxc_board_init(void)
 {
 	int ret;
 
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
 	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
 
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+	/* USB */
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -150,12 +286,7 @@
 	.init	= mx31lite_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31LITE data structure.
- */
-
-MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 5592cdb..8fc624f 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -22,11 +22,15 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -39,6 +43,12 @@
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -98,6 +108,80 @@
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= devboard_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= devboard_isp1105_init;
+	otg->set_vbus	= devboard_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -111,4 +195,6 @@
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 2bfaffb..85184a3 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,17 +16,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
 
 #include "devices.h"
 
@@ -37,7 +46,6 @@
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
 	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
 	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
 	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
 	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@@ -45,10 +53,19 @@
 	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
 	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+	/*battery detection */
+	MX31_PIN_LCS0__GPIO3_23,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -120,6 +137,166 @@
 	}
 }
 
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 1, /* according spi1_cs[] ! */
+	},
+};
+
+#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+	gpio_set_value(BASECAM_POWER, !on);
+	return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+	gpio_set_value(BASECAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(BASECAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= marxbot_basecam_power,
+	.reset		= marxbot_basecam_reset,
+	.board_info	= &marxbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device marxbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+	&marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_CHOICE, "cam-choice");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_CHOICE, 1);
+
+	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_RST_B, 1);
+	ret = gpio_request(BASECAM_POWER, "basecam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_POWER, 0);
+
+	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_RST_B, 1);
+	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_POWER, 0);
+
+	return 0;
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= marxbot_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= marxbot_isp1105_init;
+	otg->set_vbus	= marxbot_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -133,4 +310,17 @@
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	spi_register_board_info(marxbot_spi_board_info,
+		ARRAY_SIZE(marxbot_spi_board_info));
+
+	marxbot_cam_init();
+	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+	/* battery present pin */
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+	marxbot_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 9243de5..b705291 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -26,8 +27,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -37,16 +44,20 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
-#include <mach/mx31.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
 	/* UART4 */
 	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
 	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@@ -73,12 +84,31 @@
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 	/* SEL */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -101,7 +131,18 @@
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+	.init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -113,6 +154,103 @@
 	.bitrate = 100000,
 };
 
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev	= &mxcsdhc_device0.dev,
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev	= &mxcsdhc_device1.dev,
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= &mx3_camera.dev,
+		.supply	= "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+	.regulators = moboard_regulators,
+	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+		MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -208,6 +346,56 @@
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+	gpio_free(USBH2_EN_B);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= moboard_usbh2_hw_init,
+	.exit	= moboard_usbh2_hw_exit,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+}
+
+
 static struct gpio_led mx31moboard_leds[] = {
 	{
 		.name 	= "coreboard-led-0:red:running",
@@ -266,11 +454,48 @@
 	}
 }
 
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
 };
 
+static struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+#define CAMERA_BUF_SIZE	(4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -284,20 +509,34 @@
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
 	mx31moboard_init_sel_gpios();
 
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
+	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
 	usb_xcvr_reset();
 
 	moboard_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	moboard_usbh2_init();
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6ff186e..0bbc65e 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -69,6 +70,15 @@
 	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
 	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
 	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
 /*
@@ -81,6 +91,8 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init mx35pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e18a224..e3aa829 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -43,6 +43,7 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -206,6 +207,11 @@
 	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /*
  * Board specific initialization.
  */
@@ -216,6 +222,7 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49..3c5e0f5 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
+	select HAS_MTU
 
 endmenu
 
 config NOMADIK_8815
 	bool
 
-
 config I2C_BITBANG_8815NHK
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 4120409..36f67fb 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o gpio.o
+obj-y			+= clock.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537..1163944 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -25,11 +25,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+
+#include <plat/mtu.h>
+
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 #include "clock.h"
 
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
 /* These adresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
@@ -239,6 +246,26 @@
 	/* will add more devices */
 };
 
+static void __init nomadik_timer_init(void)
+{
+	u32 src_cr;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by platform timer code */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+static struct sys_timer nomadik_timer = {
+	.init	= nomadik_timer_init,
+};
+
 static void __init nhk8815_platform_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
deleted file mode 100644
index 76da7f0..0000000
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
-
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
-#define MTU_RIS		0x04	/* Raw interrupt status */
-#define MTU_MIS		0x08	/* Masked interrupt status */
-#define MTU_ICR		0x0C	/* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
-#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
-#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
-#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA		0x80
-#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK	0x0c
-#define MTU_CRn_PRESCALE_1		0x00
-#define MTU_CRn_PRESCALE_16		0x04
-#define MTU_CRn_PRESCALE_256		0x08
-#define MTU_CRn_32BITS		0x02
-#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR	0xff0
-#define MTU_ITOP	0xff4
-
-#define MTU_PERIPH_ID0	0xfe0
-#define MTU_PERIPH_ID1	0xfe4
-#define MTU_PERIPH_ID2	0xfe8
-#define MTU_PERIPH_ID3	0xfeC
-
-#define MTU_PCELL0	0xff0
-#define MTU_PCELL1	0xff4
-#define MTU_PCELL2	0xff8
-#define MTU_PCELL3	0xffC
-
-#endif /* __ASM_ARCH_MTU_H */
-
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468c..b7897ed 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
 extern void cpu8815_map_io(void);
 extern void cpu8815_platform_init(void);
 extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
 
 #endif /* NOMADIK_8815 */
 
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
deleted file mode 100644
index d1738e7..0000000
--- a/arch/arm/mach-nomadik/timer.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  linux/arch/arm/mach-nomadik/timer.c
- *
- * Copyright (C) 2008 STMicroelectronics
- * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clockchips.h>
-#include <linux/jiffies.h>
-#include <asm/mach/time.h>
-#include <mach/mtu.h>
-
-#define TIMER_CTRL	0x80	/* No divisor */
-#define TIMER_PERIODIC	0x40
-#define TIMER_SZ32BIT	0x02
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
-
-static u32	nmdk_count;		/* accumulated count */
-static u32	nmdk_cycle;		/* write-once */
-static __iomem void *mtu_base;
-
-/*
- * clocksource: the MTU device is a decrementing counters, so we negate
- * the value being read.
- */
-static cycle_t nmdk_read_timer(struct clocksource *cs)
-{
-	u32 count = readl(mtu_base + MTU_VAL(0));
-	return nmdk_count + nmdk_cycle - count;
-
-}
-
-static struct clocksource nmdk_clksrc = {
-	.name		= "mtu_0",
-	.rating		= 120,
-	.read		= nmdk_read_timer,
-	.shift		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Clockevent device: currently only periodic mode is supported
- */
-static void nmdk_clkevt_mode(enum clock_event_mode mode,
-			     struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		/* enable interrupts -- and count current value? */
-		raw_local_irq_save(flags);
-		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		BUG(); /* Not supported, yet */
-		/* FALLTHROUGH */
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq */
-		raw_local_irq_save(flags);
-		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
-		raw_local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	}
-}
-
-static struct clock_event_device nmdk_clkevt = {
-	.name		= "mtu_0",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.shift		= 32,
-	.rating		= 100,
-	.set_mode	= nmdk_clkevt_mode,
-};
-
-/*
- * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
- * as we are the only users of mtu0 by now.
- */
-static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
-{
-	/* ack: "interrupt clear register" */
-	writel( 1 << 0, mtu_base + MTU_ICR);
-
-	/* we can't count lost ticks, unfortunately */
-	nmdk_count += nmdk_cycle;
-	nmdk_clkevt.event_handler(&nmdk_clkevt);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-static struct irqaction nmdk_timer_irq = {
-	.name		= "Nomadik Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= nmdk_timer_interrupt,
-};
-
-static void nmdk_timer_reset(void)
-{
-	u32 cr;
-
-	writel(0, mtu_base + MTU_CR(0)); /* off */
-
-	/* configure load and background-load, and fire it up */
-	writel(nmdk_cycle, mtu_base + MTU_LR(0));
-	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
-	writel(cr, mtu_base + MTU_CR(0));
-	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
-}
-
-static void __init nmdk_timer_init(void)
-{
-	u32 src_cr;
-	unsigned long rate;
-	int bits;
-
-	rate = CLOCK_TICK_RATE; /* 2.4MHz */
-	nmdk_cycle = (rate + HZ/2) / HZ;
-
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
-	/* Save global pointer to mtu, used by functions above */
-	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
-	/* Init the timer and register clocksource */
-	nmdk_timer_reset();
-
-	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
-	bits =  8*sizeof(nmdk_count);
-	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
-
-	clocksource_register(&nmdk_clksrc);
-
-	/* Register irq and clockevents */
-	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
-	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
-	nmdk_clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&nmdk_clkevt);
-}
-
-struct sys_timer nomadik_timer = {
-	.init		= nmdk_timer_init,
-};
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 55ecc01..27f4897 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -11,6 +11,7 @@
 	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
 	select CPU_ARM926T
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
@@ -56,6 +57,12 @@
 	help
 	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
 
+config MACH_HERALD
+	bool "HTC Herald"
+	depends on ARCH_OMAP850
+	help
+	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
+
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 6867cd3..87e539a 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -34,6 +34,7 @@
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
+obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8ad5cc3..7fc11c3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -25,13 +25,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
-#include <mach/keypad.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/keypad.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b..f4b72c1 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -26,14 +26,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/nand.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */
 
@@ -107,7 +107,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -196,8 +196,8 @@
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -309,7 +309,7 @@
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -320,21 +320,21 @@
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6c8a41f..e1195a3 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,10 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 46098f5..b30c499 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index aab8603..89ba8ec 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -37,14 +37,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/nand.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include "board-h2.h"
 
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 5e8877c..54b0f06 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 89586b8..f5cc0a7 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -40,13 +40,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/dma.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/dma.h>
+#include <plat/common.h>
 
 #include "board-h3.h"
 
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
new file mode 100644
index 0000000..5f28a5c
--- /dev/null
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -0,0 +1,247 @@
+/*
+ * HTC Herald board configuration
+ * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ * Copyright (C) 2009 Wing Linux
+ *
+ * Based on the board-htcwizard.c file from the linwizard project:
+ * Copyright (C) 2006 Unai Uribarri
+ * Copyright (C) 2008 linwizard.sourceforge.net
+ *
+ * This  program is  free  software; you  can  redistribute it  and/or
+ * modify  it under the  terms of  the GNU  General Public  License as
+ * published by the Free Software  Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT  ANY  WARRANTY;  without   even  the  implied  warranty  of
+ * MERCHANTABILITY or  FITNESS FOR A PARTICULAR PURPOSE.   See the GNU
+ * General Public License for more details.
+ *
+ * You should have  received a copy of the  GNU General Public License
+ * along  with  this program;  if  not,  write  to the  Free  Software
+ * Foundation,  Inc.,  51 Franklin  Street,  Fifth  Floor, Boston,  MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/omap7xx.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+
+#include <mach/irqs.h>
+
+#include <linux/delay.h>
+
+/* LCD register definition */
+#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
+#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
+#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
+#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
+#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
+#define       OMAP_LCDC_STAT_DONE             (1 << 0)
+
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+	{ OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
+/* Keyboard definition */
+
+static int htc_herald_keymap[] = {
+	KEY(0, 0, KEY_RECORD), /* Mail button */
+	KEY(0, 1, KEY_CAMERA), /* Camera */
+	KEY(0, 2, KEY_PHONE), /* Send key */
+	KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
+	KEY(0, 4, KEY_F2),  /* Right bar (landscape) */
+	KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
+	KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
+	KEY(1, 1, KEY_COMMA),
+	KEY(1, 2, KEY_M),
+	KEY(1, 3, KEY_K),
+	KEY(1, 4, KEY_SLASH), /* OK key */
+	KEY(1, 5, KEY_I),
+	KEY(1, 6, KEY_U),
+	KEY(2, 0, KEY_LEFTALT),
+	KEY(2, 1, KEY_TAB),
+	KEY(2, 2, KEY_N),
+	KEY(2, 3, KEY_J),
+	KEY(2, 4, KEY_ENTER),
+	KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_Y),
+	KEY(3, 0, KEY_SPACE),
+	KEY(3, 1, KEY_L),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_V),
+	KEY(3, 4, KEY_BACKSPACE),
+	KEY(3, 5, KEY_G),
+	KEY(3, 6, KEY_T),
+	KEY(4, 0, KEY_CAPSLOCK), /* Shift */
+	KEY(4, 1, KEY_C),
+	KEY(4, 2, KEY_F),
+	KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_O),
+	KEY(4, 5, KEY_E),
+	KEY(4, 6, KEY_D),
+	KEY(5, 0, KEY_X),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_S),
+	KEY(5, 3, KEY_W),
+	KEY(5, 4, KEY_P),
+	KEY(5, 5, KEY_Q),
+	KEY(5, 6, KEY_A),
+	KEY(6, 0, KEY_CONNECT), /* Voice button */
+	KEY(6, 2, KEY_CANCEL), /* End key */
+	KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
+	KEY(6, 4, KEY_F1), /* Left bar (landscape) */
+	KEY(6, 5, KEY_WWW), /* OK button (portrait) */
+	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
+	0
+};
+
+struct omap_kp_platform_data htcherald_kp_data = {
+	.rows	= 7,
+	.cols	= 7,
+	.delay = 20,
+	.rep = 1,
+	.keymap = htc_herald_keymap,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &htcherald_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+/* LCD Device resources */
+static struct platform_device lcd_device = {
+	.name           = "lcd_htcherald",
+	.id             = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&kp_device,
+	&lcd_device,
+};
+
+/*
+ * Init functions from here on
+ */
+
+static void __init htcherald_lcd_init(void)
+{
+	u32 reg;
+	unsigned int tries = 200;
+
+	/* disable controller if active */
+	reg = omap_readl(OMAP_LCDC_CONTROL);
+	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
+		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
+		omap_writel(reg, OMAP_LCDC_CONTROL);
+
+		/* wait for end of frame */
+		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
+			tries--;
+			if (!tries)
+				break;
+		}
+		if (!tries)
+			printk(KERN_WARNING "Timeout waiting for end of frame "
+			       "-- LCD may not be available\n");
+
+		/* turn off DMA */
+		reg = omap_readw(OMAP_DMA_LCD_CCR);
+		reg &= ~(1 << 7);
+		omap_writew(reg, OMAP_DMA_LCD_CCR);
+
+		reg = omap_readw(OMAP_DMA_LCD_CTRL);
+		reg &= ~(1 << 8);
+		omap_writew(reg, OMAP_DMA_LCD_CTRL);
+	}
+}
+
+static void __init htcherald_map_io(void)
+{
+	omap1_map_common_io();
+
+	/*
+	 * The LCD panel must be disabled and DMA turned off here, as doing
+	 * it later causes the LCD never to reinitialize.
+	 */
+	htcherald_lcd_init();
+
+	printk(KERN_INFO "htcherald_map_io done.\n");
+}
+
+static void __init htcherald_disable_watchdog(void)
+{
+	/* Disable watchdog if running */
+	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
+		/*
+		 * disable a potentially running watchdog timer before
+		 * it kills us.
+		 */
+		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
+		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
+		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+static void __init htcherald_init(void)
+{
+	printk(KERN_INFO "HTC Herald init.\n");
+
+	omap_gpio_init();
+
+	omap_board_config = htcherald_config;
+	omap_board_config_size = ARRAY_SIZE(htcherald_config);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	htcherald_disable_watchdog();
+}
+
+static void __init htcherald_init_irq(void)
+{
+	printk(KERN_INFO "htcherald_init_irq.\n");
+	omap1_init_common_hw();
+	omap_init_irq();
+}
+
+MACHINE_START(HERALD, "HTC Herald")
+	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
+	/* Maintainer: wing-linux.sourceforge.net */
+	.phys_io        = 0xfff00000,
+	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params    = 0x10000100,
+	.map_io         = htcherald_map_io,
+	.init_irq       = htcherald_init_irq,
+	.init_machine   = htcherald_init,
+	.timer          = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cd6c395..cf0fdb9 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -30,14 +30,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index ed2a48a..5a275ba 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/dsp_common.h>
-#include <mach/omapfb.h>
-#include <mach/hwa742.h>
-#include <mach/lcd_mipid.h>
-#include <mach/mmc.h>
-#include <mach/clock.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/dsp_common.h>
+#include <plat/omapfb.h>
+#include <plat/hwa742.h>
+#include <plat/lcd_mipid.h>
+#include <plat/mmc.h>
+#include <plat/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ed891b8..50c92c1 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -47,10 +47,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/usb.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/common.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/common.h>
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
@@ -312,7 +312,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <mach/keypad.h>
+#include <plat/keypad.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4de2584..9fe8872 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,14 +34,14 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/dma.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d972cf9..af068e3 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -29,16 +29,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/led.h>
+#include <plat/led.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 986bd4d..c7a3b6f 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -33,15 +33,15 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/omap-alsa.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699..ca7df1e 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -26,14 +26,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/nand.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
@@ -74,7 +74,7 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -163,8 +163,8 @@
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -270,7 +270,7 @@
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -281,21 +281,21 @@
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 58a46e4..5b33ae8 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -15,9 +15,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/board-sx1.h>
+#include <plat/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 056ae64..7a97fac 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -33,15 +33,15 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/board-sx1.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 07b0752..35c75c1 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -29,11 +29,11 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 436eed2..42cbe20 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -22,10 +22,10 @@
 #include <asm/mach-types.h>
 #include <asm/clkdev.h>
 
-#include <mach/cpu.h>
-#include <mach/usb.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/usb.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 static const struct clkops clkops_generic;
 static const struct clkops clkops_uart;
@@ -69,13 +69,13 @@
 	}
 
 #define CK_310	(1 << 0)
-#define CK_730	(1 << 1)
+#define CK_7XX	(1 << 1)
 #define CK_1510	(1 << 2)
 #define CK_16XX	(1 << 3)
 
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
 	/* CK_GEN1 clocks */
 	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
@@ -83,7 +83,7 @@
 	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
@@ -97,9 +97,9 @@
 	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
 	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_730),
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
 	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
 	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
 	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
@@ -108,7 +108,7 @@
 	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
 	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
 	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_730),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
 	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
 	/* ULPD clocks */
 	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
@@ -120,12 +120,14 @@
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
 	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
 	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
 	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
 	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
 	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
 	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
 	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
 	/* Virtual clocks */
@@ -398,7 +400,7 @@
 	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
 	 * (on 730, bit 13 must always be 1)
 	 */
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
 	else
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
@@ -783,8 +785,8 @@
 		cpu_mask |= CK_16XX;
 	if (cpu_is_omap1510())
 		cpu_mask |= CK_1510;
-	if (cpu_is_omap730())
-		cpu_mask |= CK_730;
+	if (cpu_is_omap7xx())
+		cpu_mask |= CK_7XX;
 	if (cpu_is_omap310())
 		cpu_mask |= CK_310;
 
@@ -800,7 +802,7 @@
 			crystal_type = info->system_clock_type;
 	}
 
-#if defined(CONFIG_ARCH_OMAP730)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 	ck_ref.rate = 13000000;
 #elif defined(CONFIG_ARCH_OMAP16XX)
 	if (crystal_type == 2)
@@ -847,7 +849,7 @@
 		printk(KERN_ERR "System frequencies not set. Check your config.\n");
 		/* Guess sane values (60MHz) */
 		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
 	}
 #endif
@@ -862,7 +864,7 @@
 
 #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
 	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+	omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
 #endif
 
 	/* Amstrad Delta wants BCLK high when inactive */
@@ -873,7 +875,7 @@
 
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
 	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
 	else
 		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 17f8742..29ffa97 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -574,6 +574,16 @@
 	.enable_bit	= 4,
 };
 
+static struct clk usb_dc_ck7xx = {
+	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 8,
+};
+
 static struct clk mclk_1510 = {
 	.name		= "mclk",
 	.ops		= &clkops_generic,
@@ -637,6 +647,18 @@
 	.enable_bit	= 20,
 };
 
+static struct clk mmc3_ck = {
+	.name		= "mmc_ck",
+	.id		= 2,
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 12,
+};
+
 static struct clk virtual_ck_mpu = {
 	.name		= "mpu",
 	.ops		= &clkops_null,
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 0680843..23ded2d 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -18,11 +18,11 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -108,15 +108,22 @@
 			int controller_nr)
 {
 	if (controller_nr == 0) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_7XX_CMD);
+			omap_cfg_reg(MMC_7XX_CLK);
+			omap_cfg_reg(MMC_7XX_DAT0);
+		} else {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+		}
+
 		if (cpu_is_omap1710()) {
 			omap_cfg_reg(M15_1710_MMC_CLKI);
 			omap_cfg_reg(P19_1710_MMC_CMDDIR);
 			omap_cfg_reg(P20_1710_MMC_DATDIR0);
 		}
-		if (mmc_controller->slots[0].wires == 4) {
+		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
 			omap_cfg_reg(MMC_DAT1);
 			/* NOTE: DAT2 can be on W10 (here) or M15 */
 			if (!mmc_controller->slots[0].nomux)
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 4f2b8a7..5cfce16 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index e5dcdf7..a0e3560 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h
new file mode 100644
index 0000000..ea8640e
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
new file mode 100644
index 0000000..aedb746
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -0,0 +1,45 @@
+/* arch/arm/mach-omap1/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
new file mode 100644
index 0000000..df9060e
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-omap1/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
+
+#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+#define INT_IH2_IRQ		INT_7XX_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
new file mode 100644
index 0000000..e737706
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
new file mode 100644
index 0000000..a3f6287
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
new file mode 100644
index 0000000..57bdf74
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
new file mode 100644
index 0000000..9292fdc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
new file mode 100644
index 0000000..e9b600c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/mtd-xip.h
rename to arch/arm/mach-omap1/include/mach/mtd-xip.h
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h
new file mode 100644
index 0000000..80a371c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
new file mode 100644
index 0000000..a6c1b3a
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h
new file mode 100644
index 0000000..4793790
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
new file mode 100644
index 0000000..0ff22dc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
new file mode 100644
index 0000000..1b2af14
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-omap1/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 7030f928..2a6d68a 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
@@ -36,33 +36,17 @@
 	}
 };
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct map_desc omap730_io_desc[] __initdata = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
 	{
-		.virtual	= OMAP730_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP730_DSP_START),
-		.length		= OMAP730_DSP_SIZE,
+		.virtual	= OMAP7XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
+		.length		= OMAP7XX_DSP_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP730_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP730_DSPREG_START),
-		.length		= OMAP730_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-static struct map_desc omap850_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP850_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
-		.length		= OMAP850_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP850_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
-		.length		= OMAP850_DSPREG_SIZE,
+		.virtual	= OMAP7XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
+		.length		= OMAP7XX_DSPREG_SIZE,
 		.type		= MT_DEVICE
 	}
 };
@@ -120,18 +104,11 @@
 	 */
 	omap_check_revision();
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
 	}
 #endif
-
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
-	}
-#endif
-
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index de03c84..db913c3 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -46,7 +46,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/gpio.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
@@ -137,16 +137,8 @@
 	irq_bank_writel(val, bank, offset);
 }
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct omap_irq_bank omap730_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-static struct omap_irq_bank omap850_irq_banks[] = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct omap_irq_bank omap7xx_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
 	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
 	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
@@ -186,16 +178,10 @@
 {
 	int i, j;
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		irq_banks = omap730_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		irq_banks = omap850_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		irq_banks = omap7xx_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -247,10 +233,8 @@
 
 	/* Unmask level 2 handler */
 
-	if (cpu_is_omap730())
-		omap_unmask_irq(INT_730_IH2_IRQ);
-	else if (cpu_is_omap850())
-		omap_unmask_irq(INT_850_IH2_IRQ);
+	if (cpu_is_omap7xx())
+		omap_unmask_irq(INT_7XX_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 17c9d0e..b4f9be5 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -19,7 +19,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 8cbf256..277f356 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -10,7 +10,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 6810b4a..caf889a 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 505d98c..6bddce1 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -18,11 +18,11 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -79,29 +79,29 @@
 	.free		= omap1_mcbsp_free,
 };
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP730_MCBSP1_BASE,
+		.phys_base	= OMAP7XX_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
-		.rx_irq		= INT_730_McBSP1RX,
-		.tx_irq		= INT_730_McBSP1TX,
+		.rx_irq		= INT_7XX_McBSP1RX,
+		.tx_irq		= INT_7XX_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP730_MCBSP2_BASE,
+		.phys_base	= OMAP7XX_MCBSP2_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
-		.rx_irq		= INT_730_McBSP2RX,
-		.tx_irq		= INT_730_McBSP2TX,
+		.rx_irq		= INT_7XX_McBSP2RX,
+		.tx_irq		= INT_7XX_McBSP2TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 };
-#define OMAP730_MCBSP_PDATA_SZ		ARRAY_SIZE(omap730_mcbsp_pdata)
+#define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
 #else
-#define omap730_mcbsp_pdata		NULL
-#define OMAP730_MCBSP_PDATA_SZ		0
+#define omap7xx_mcbsp_pdata		NULL
+#define OMAP7XX_MCBSP_PDATA_SZ		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -172,8 +172,8 @@
 
 int __init omap1_mcbsp_init(void)
 {
-	if (cpu_is_omap730())
-		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+	if (cpu_is_omap7xx())
+		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
 	if (cpu_is_omap15xx())
 		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
 	if (cpu_is_omap16xx())
@@ -184,9 +184,9 @@
 	if (!mcbsp_ptr)
 		return -ENOMEM;
 
-	if (cpu_is_omap730())
-		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
-						OMAP730_MCBSP_PDATA_SZ);
+	if (cpu_is_omap7xx())
+		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
+						OMAP7XX_MCBSP_PDATA_SZ);
 
 	if (cpu_is_omap15xx())
 		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 721e0d9..785371e 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -29,53 +29,39 @@
 
 #include <asm/system.h>
 
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
 static struct omap_mux_cfg arch_mux_cfg;
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct pin_config __initdata_or_module omap730_pins[] = {
-MUX_CFG_730("E2_730_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_730("J7_730_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_730("E1_730_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_730("F3_730_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_730("D2_730_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_730("C2_730_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_730("D3_730_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_730("E4_730_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_730("F4_730_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_730("E3_730_KBC4",        13,   25,    0,   24,   1, 0)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct pin_config __initdata_or_module omap7xx_pins[] = {
+MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
 
-MUX_CFG_730("AA17_730_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_730("W16_730_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+
+/* MMC Pins */
+MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
 };
-#define OMAP730_PINS_SZ		ARRAY_SIZE(omap730_pins)
+#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else
-#define omap730_pins		NULL
-#define OMAP730_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 */
-
-#ifdef CONFIG_ARCH_OMAP850
-struct pin_config __initdata_or_module omap850_pins[] = {
-MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
-};
-#endif
+#define omap7xx_pins		NULL
+#define OMAP7XX_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
@@ -438,11 +424,6 @@
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
-
-#ifdef CONFIG_ARCH_OMAP850
-	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
-#endif
-
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS
@@ -454,9 +435,9 @@
 
 int __init omap1_mux_init(void)
 {
-	if (cpu_is_omap730()) {
-		arch_mux_cfg.pins	= omap730_pins;
-		arch_mux_cfg.size	= OMAP730_PINS_SZ;
+	if (cpu_is_omap7xx()) {
+		arch_mux_cfg.pins	= omap7xx_pins;
+		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
 		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
 	}
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 5218943..b1d3f9f 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -48,21 +48,21 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/dmtimer.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/tc.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
 
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
+static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -183,9 +183,9 @@
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap730())
-		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+	if (cpu_is_omap7xx())
+		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
@@ -195,10 +195,10 @@
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
+		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
+				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
 				OMAP_IH2_1_MIR);
 	} else if (cpu_is_omap15xx()) {
 		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
@@ -253,15 +253,15 @@
 	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(OMAP_IH1_MIR);
-		MPUI730_SAVE(OMAP_IH2_0_MIR);
-		MPUI730_SAVE(OMAP_IH2_1_MIR);
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(OMAP_IH1_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
 
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
@@ -306,7 +306,7 @@
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
 		/* shut down dsp_ck */
-	if (!cpu_is_omap730())
+	if (!cpu_is_omap7xx())
 		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
@@ -383,12 +383,12 @@
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap730()) {
-		MPUI730_RESTORE(EMIFS_CONFIG);
-		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI730_RESTORE(OMAP_IH1_MIR);
-		MPUI730_RESTORE(OMAP_IH2_0_MIR);
-		MPUI730_RESTORE(OMAP_IH2_1_MIR);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_RESTORE(EMIFS_CONFIG);
+		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_RESTORE(OMAP_IH1_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
@@ -461,13 +461,13 @@
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_STATUS);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_STATUS);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
@@ -517,20 +517,20 @@
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-		if (cpu_is_omap730()) {
+		if (cpu_is_omap7xx()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI730_CTRL_REG	     0x%-8x \n"
-			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI730_SHOW(MPUI_CTRL),
-			   MPUI730_SHOW(MPUI_DSP_STATUS),
-			   MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI730_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI730_SHOW(EMIFS_CONFIG));
+			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
+			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI7XX_SHOW(MPUI_CTRL),
+			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
+			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI7XX_SHOW(EMIFS_CONFIG));
 		} else if (cpu_is_omap15xx()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
@@ -668,9 +668,9 @@
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap730()) {
-		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
-						   omap730_cpu_suspend_sz);
+	if (cpu_is_omap7xx()) {
+		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
+						   omap7xx_cpu_suspend_sz);
 	} else if (cpu_is_omap15xx()) {
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 						   omap1510_cpu_suspend_sz);
@@ -686,8 +686,8 @@
 
 	pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap730())
-		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+	if (cpu_is_omap7xx())
+		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
 	else if (cpu_is_omap16xx())
 		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
 
@@ -700,8 +700,8 @@
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap730())
-		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+	if (cpu_is_omap7xx())
+		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
 	else if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index c4f05bd..56a6479 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -98,13 +98,14 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP730_IDLECT3_VAL		0x3f
-#define OMAP730_IDLECT3		0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP7XX_IDLECT3_VAL		0x3f
+#define OMAP7XX_IDLECT3		0xfffece24
+#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP850) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
@@ -122,17 +123,17 @@
 extern void omap1_pm_idle(void);
 extern void omap1_pm_suspend(void);
 
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap730_idle_loop_suspend(void);
+extern void omap7xx_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
-extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap7xx_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap7xx_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
 
@@ -155,9 +156,9 @@
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
+#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
 
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
@@ -232,24 +233,24 @@
 #endif
 };
 
-enum mpui730_save_state {
-	MPUI730_SLEEP_SAVE_START = 0,
+enum mpui7xx_save_state {
+	MPUI7XX_SLEEP_SAVE_START = 0,
 	/*
 	 * MPUI registers 32 bits
 	 */
-	MPUI730_SLEEP_SAVE_MPUI_CTRL,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
-	MPUI730_SLEEP_SAVE_SIZE
+	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	MPUI7XX_SLEEP_SAVE_SIZE
 #else
-	MPUI730_SLEEP_SAVE_SIZE = 0
+	MPUI7XX_SLEEP_SAVE_SIZE = 0
 #endif
 };
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d23979b..6e5207c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
@@ -64,7 +64,6 @@
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +72,6 @@
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +80,6 @@
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -110,18 +107,11 @@
 {
 	int i;
 
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		serial_platform_data[0].regshift = 0;
 		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_730_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
-	}
-
-	if (cpu_is_omap850()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
 	}
 
 	if (cpu_is_omap15xx()) {
@@ -130,7 +120,15 @@
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
+
+		/* Static mapping, never released */
+		serial_platform_data[i].membase =
+			ioremap(serial_platform_data[i].mapbase, SZ_2K);
+		if (!serial_platform_data[i].membase) {
+			printk(KERN_ERR "Could not ioremap uart%i\n", i);
+			continue;
+		}
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 22e8568..ef771ce8 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-omap1/sleep.S
  *
- * Low-level OMAP730/1510/1610 sleep/wakeUp support
+ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
  *
  * Initial SA1110 code:
  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
@@ -57,8 +57,8 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP730)
-ENTRY(omap730_cpu_suspend)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ENTRY(omap7xx_cpu_suspend)
 
 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}
@@ -91,13 +91,13 @@
 
 	@ turn off clock domains
 	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
-	mov	r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
+	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	@ disable instruction cache
@@ -113,7 +113,7 @@
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
 /*
- * omap730_cpu_suspend()'s resume point.
+ * omap7xx_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
  * stack.
@@ -132,9 +132,9 @@
 	@ restore regs and return
 	ldmfd	sp!, {r0 - r12, pc}
 
-ENTRY(omap730_cpu_suspend_sz)
-	.word	. - omap730_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 */
+ENTRY(omap7xx_cpu_suspend_sz)
+	.word	. - omap7xx_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_cpu_suspend)
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fd3f739..9ad1185 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -52,7 +52,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index aad194f..7309aab 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -65,6 +65,10 @@
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP3517EVM
+	bool "OMAP3517/ AM3517 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
@@ -97,6 +101,30 @@
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_OMAP_ZOOM3
+	bool "OMAP3630 Zoom3 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_CM_T35
+	bool "CompuLab CM-T35 module"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_IGEP0020
+	bool "IGEP0020"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_3630SDP
+	bool "OMAP3630 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4
+
+config OMAP3_EMU
+	bool "OMAP3 debugging peripherals"
+	depends on ARCH_OMAP3
+	select OC_ETM
+	help
+	  Say Y here to enable debugging hardware of omap3
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8cb1677..32548a4 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -31,7 +31,7 @@
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
@@ -44,6 +44,12 @@
 obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
+# EMU peripherals
+obj-$(CONFIG_OMAP3_EMU)		+= emu.o
+
+obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
+mailbox_mach-objs			:= mailbox.o
+
 iommu-y					+= iommu2.o
 iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
 
@@ -69,17 +75,33 @@
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   board-zoom-peripherals.o \
 					   mmc-twl4030.o \
 					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
+					   mmc-twl4030.o
 
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
+obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
+
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
+obj-y					+= usb-ehci.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 42217b32..db9374b 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -31,12 +31,12 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
@@ -221,7 +221,7 @@
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
 	.init_irq	= omap_2430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 0acb556..491364e 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -30,16 +30,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
 
-#include <mach/control.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/control.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
@@ -410,6 +410,15 @@
 	.consumer_supplies	= &sdp3430_vdvi_supply,
 };
 
+static struct twl4030_codec_audio_data sdp3430_audio = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data sdp3430_codec = {
+	.audio_mclk = 26000000,
+	.audio = &sdp3430_audio,
+};
+
 static struct twl4030_platform_data sdp3430_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -420,6 +429,7 @@
 	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
 	.usb		= &sdp3430_usb_data,
+	.codec		= &sdp3430_codec,
 
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -484,6 +494,18 @@
 	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -500,6 +522,7 @@
 	usb_musb_init();
 	board_smc91x_init();
 	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
 }
 
 static void __init omap_3430sdp_map_io(void)
@@ -511,7 +534,7 @@
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
 	.init_irq	= omap_3430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
new file mode 100755
index 0000000..348b70b
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+#include <mach/board-zoom.h>
+
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs             = 3,
+	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	board_smc91x_data.gpio_irq = 158;
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
+
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 126,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap_sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel sdp_config[] __initdata = {
+};
+
+static void __init omap_sdp_init_irq(void)
+{
+	omap_board_config = sdp_config;
+	omap_board_config_size = ARRAY_SIZE(sdp_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init omap_sdp_init(void)
+{
+	zoom_peripherals_init();
+	board_smc91x_init();
+	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
+}
+
+MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_sdp_map_io,
+	.init_irq	= omap_sdp_init_irq,
+	.init_machine	= omap_sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 609a5a4..0c6be6b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -23,10 +23,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/timer-gp.h>
 #include <asm/hardware/gic.h>
 
 static struct platform_device sdp4430_lcd_device = {
@@ -52,8 +52,17 @@
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	void __iomem *base;
+
+	/* Static mapping, never released */
+	base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+	BUG_ON(!base);
+	gic_dist_init(0, base, 29);
+
+	/* Static mapping, never released */
+	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!gic_cpu_base_addr);
+	gic_cpu_init(0, gic_cpu_base_addr);
 }
 
 static void __init omap_4430sdp_init_irq(void)
@@ -84,7 +93,7 @@
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
 	.init_irq	= omap_4430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
new file mode 100644
index 0000000..415a13d
--- /dev/null
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -0,0 +1,86 @@
+/*
+ * linux/arch/arm/mach-omap2/board-am3517evm.c
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ * Author: Ranjith Lohithakshan <ranjithl@ti.com>
+ *
+ * Based on mach-omap2/board-omap3evm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as  published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+
+/*
+ * Board initialization
+ */
+static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
+};
+
+static struct platform_device *am3517_evm_devices[] __initdata = {
+};
+
+static void __init am3517_evm_init_irq(void)
+{
+	omap_board_config = am3517_evm_config;
+	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
+
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init am3517_evm_init(void)
+{
+	platform_add_devices(am3517_evm_devices,
+				ARRAY_SIZE(am3517_evm_devices));
+
+	omap_serial_init();
+	usb_ehci_init(&ehci_pdata);
+}
+
+static void __init am3517_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= am3517_evm_map_io,
+	.init_irq	= am3517_evm_init_irq,
+	.init_machine	= am3517_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a113228..8a2ce77 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -33,13 +33,13 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/led.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/control.h>
+#include <plat/led.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -333,7 +333,7 @@
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
 	.init_irq	= omap_apollon_init_irq,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
new file mode 100644
index 0000000..22c4529
--- /dev/null
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -0,0 +1,507 @@
+/*
+ * board-cm-t35.c (CompuLab CM-T35 module)
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/at24.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/mux.h>
+#include <plat/nand.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include <mach/hardware.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define CM_T35_GPIO_PENDOWN	57
+
+#define CM_T35_SMSC911X_CS	5
+#define CM_T35_SMSC911X_GPIO	163
+#define SB_T35_SMSC911X_CS	4
+#define SB_T35_SMSC911X_GPIO	65
+
+#define NAND_BLOCK_SIZE		SZ_128K
+#define GPMC_CS0_BASE		0x60
+#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config cm_t35_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource cm_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device cm_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cm_t35_smsc911x_resources),
+	.resource	= cm_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static struct resource sb_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device sb_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sb_t35_smsc911x_resources),
+	.resource	= sb_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static void __init cm_t35_init_smsc911x(struct platform_device *dev,
+					int cs, int irq_gpio)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n");
+		return;
+	}
+
+	dev->resource[0].start = cs_mem_base + 0x0;
+	dev->resource[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(irq_gpio, "ETH IRQ") == 0) &&
+	    (gpio_direction_input(irq_gpio) == 0)) {
+		gpio_export(irq_gpio, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(dev);
+}
+
+static void __init cm_t35_init_ethernet(void)
+{
+	cm_t35_init_smsc911x(&cm_t35_smsc911x_device,
+			     CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO);
+	cm_t35_init_smsc911x(&sb_t35_smsc911x_device,
+			     SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO);
+}
+#else
+static inline void __init cm_t35_init_ethernet(void) { return; }
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led cm_t35_leds[] = {
+	[0] = {
+		.gpio			= 186,
+		.name			= "cm-t35:green",
+		.default_trigger	= "heartbeat",
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data cm_t35_led_pdata = {
+	.num_leds	= ARRAY_SIZE(cm_t35_leds),
+	.leds		= cm_t35_leds,
+};
+
+static struct platform_device cm_t35_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &cm_t35_led_pdata,
+	},
+};
+
+static void __init cm_t35_init_led(void)
+{
+	platform_device_register(&cm_t35_led_device);
+}
+#else
+static inline void cm_t35_init_led(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct mtd_partition cm_t35_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,			/* Offset = 0x00000 */
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size           = 15 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "uboot environment",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size           = 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "linux",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size           = 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data cm_t35_nand_data = {
+	.parts			= cm_t35_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
+	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
+	.cs			= 0,
+	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
+	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
+
+};
+
+static struct resource cm_t35_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cm_t35_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &cm_t35_nand_resource,
+	.dev		= {
+		.platform_data	= &cm_t35_nand_data,
+	},
+};
+
+static void __init cm_t35_init_nand(void)
+{
+	if (platform_device_register(&cm_t35_nand_device) < 0)
+		pr_err("CM-T35: Unable to register NAND device\n");
+}
+#else
+static inline void cm_t35_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <plat/mcspi.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(CM_T35_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info cm_t35_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init cm_t35_init_ads7846(void)
+{
+	if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) {
+		gpio_export(CM_T35_GPIO_PENDOWN, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(cm_t35_spi_board_info,
+				ARRAY_SIZE(cm_t35_spi_board_info));
+}
+#else
+static inline void cm_t35_init_ads7846(void) {}
+#endif
+
+static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply cm_t35_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data cm_t35_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data cm_t35_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vsim_supply,
+};
+
+static struct twl4030_usb_data cm_t35_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int cm_t35_keymap[] = {
+	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
+	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
+	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data cm_t35_keymap_data = {
+	.keymap			= cm_t35_keymap,
+	.keymap_size		= ARRAY_SIZE(cm_t35_keymap),
+};
+
+static struct twl4030_keypad_data cm_t35_kp_data = {
+	.keymap_data	= &cm_t35_keymap_data,
+	.rows		= 3,
+	.cols		= 3,
+	.rep		= 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.transceiver	= 1,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
+				 unsigned ngpio)
+{
+	int wlan_rst = gpio + 2;
+
+	if ((gpio_request(wlan_rst, "WLAN RST") == 0) &&
+	    (gpio_direction_output(wlan_rst, 1) == 0)) {
+		gpio_export(wlan_rst, 0);
+
+		udelay(10);
+		gpio_set_value(wlan_rst, 0);
+		udelay(10);
+		gpio_set_value(wlan_rst, 1);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
+	}
+
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	cm_t35_vmmc1_supply.dev = mmc[0].dev;
+	cm_t35_vsim_supply.dev = mmc[0].dev;
+
+	/* setup USB with proper PHY reset GPIOs */
+	ehci_pdata.reset_gpio_port[0] = gpio + 6;
+	ehci_pdata.reset_gpio_port[1] = gpio + 7;
+
+	usb_ehci_init(&ehci_pdata);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup          = cm_t35_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data cm_t35_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &cm_t35_kp_data,
+	.usb		= &cm_t35_usb_data,
+	.gpio		= &cm_t35_gpio_data,
+	.vmmc1		= &cm_t35_vmmc1,
+	.vsim		= &cm_t35_vsim,
+};
+
+static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tps65930", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &cm_t35_twldata,
+	},
+};
+
+static void __init cm_t35_init_i2c(void)
+{
+	omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo,
+			      ARRAY_SIZE(cm_t35_i2c_boardinfo));
+}
+
+static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+};
+
+static void __init cm_t35_init_irq(void)
+{
+	omap_board_config = cm_t35_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
+
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init cm_t35_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static void __init cm_t35_init(void)
+{
+	omap_serial_init();
+	cm_t35_init_i2c();
+	cm_t35_init_nand();
+	cm_t35_init_ads7846();
+	cm_t35_init_ethernet();
+	cm_t35_init_led();
+
+	usb_musb_init();
+
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ);
+}
+
+MACHINE_START(CM_T35, "Compulab CM-T35")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= cm_t35_map_io,
+	.init_irq	= cm_t35_init_irq,
+	.init_machine	= cm_t35_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2e09a1c..7e6e6ca 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -26,10 +26,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static struct omap_board_config_kernel generic_config[] = {
 };
@@ -56,7 +56,7 @@
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
 	.init_irq	= omap_generic_init_irq,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index eaa02d0..cfb7f12 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/menelaus.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/menelaus.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
@@ -376,7 +376,7 @@
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
 	.init_irq	= omap_h4_init_irq,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
new file mode 100644
index 0000000..fa62e80
--- /dev/null
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+#include "mmc-twl4030.h"
+
+#define IGEP2_SMSC911X_CS       5
+#define IGEP2_SMSC911X_GPIO     176
+#define IGEP2_GPIO_USBH_NRESET  24
+#define IGEP2_GPIO_LED0_RED 	26
+#define IGEP2_GPIO_LED0_GREEN 	27
+#define IGEP2_GPIO_LED1_RED   	28
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config igep2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS  ,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource igep2_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device igep2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(igep2_smsc911x_resources),
+	.resource	= igep2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &igep2_smsc911x_config,
+	},
+};
+
+static inline void __init igep2_init_smsc911x(void)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n");
+		gpmc_cs_free(IGEP2_SMSC911X_CS);
+		return;
+	}
+
+	igep2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	igep2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
+	    (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) {
+		gpio_export(IGEP2_SMSC911X_GPIO, 0);
+	} else {
+		pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(&igep2_smsc911x_device);
+}
+
+#else
+static inline void __init igep2_init_smsc911x(void) { }
+#endif
+
+static struct omap_board_config_kernel igep2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply igep2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data igep2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vmmc1_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int igep2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	igep2_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+};
+
+static struct twl4030_gpio_platform_data igep2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= false,
+	.setup		= igep2_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data igep2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init igep2_init_irq(void)
+{
+	omap_board_config = igep2_config;
+	omap_board_config_size = ARRAY_SIZE(igep2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct twl4030_platform_data igep2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &igep2_usb_data,
+	.gpio		= &igep2_gpio_data,
+	.vmmc1          = &igep2_vmmc1,
+
+};
+
+static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &igep2_twldata,
+	},
+};
+
+static int __init igep2_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo,
+			ARRAY_SIZE(igep2_i2c_boardinfo));
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
+	return 0;
+}
+
+static void __init igep2_init(void)
+{
+	igep2_i2c_init();
+	omap_serial_init();
+	usb_musb_init();
+
+	igep2_init_smsc911x();
+
+	/* GPIO userspace leds */
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED1_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+}
+
+static void __init igep2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(IGEP0020, "IGEP v2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= igep2_map_io,
+	.init_irq	= igep2_init_irq,
+	.init_machine	= igep2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d57ec2f..c062238 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -33,15 +33,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <mach/gpio.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
 
 #include <asm/delay.h>
-#include <mach/control.h>
-#include <mach/usb.h>
+#include <plat/control.h>
+#include <plat/usb.h>
 
 #include "mmc-twl4030.h"
 
@@ -399,7 +399,7 @@
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
 	.init_irq	= omap_ldp_init_irq,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8341632..764ab1e 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/irqs.h>
-#include <mach/mcspi.h>
-#include <mach/onenand.h>
-#include <mach/serial.h>
+#include <plat/mcspi.h>
+#include <plat/onenand.h>
+#include <plat/serial.h>
 
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
@@ -121,7 +121,7 @@
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -131,7 +131,7 @@
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -141,7 +141,7 @@
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 08b0816..41480bd 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -37,13 +37,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
 
 #include "mmc-twl4030.h"
 
@@ -254,6 +254,15 @@
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static struct twl4030_codec_audio_data beagle_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data beagle_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &beagle_audio_data,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -261,6 +270,7 @@
 	/* platform_data for children goes here */
 	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
+	.codec		= &beagle_codec_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
 	.vdac		= &beagle_vdac,
@@ -400,6 +410,18 @@
 	}
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
 static void __init omap3_beagle_init(void)
 {
 	omap3_beagle_i2c_init();
@@ -413,6 +435,7 @@
 	gpio_direction_output(170, true);
 
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
@@ -429,7 +452,7 @@
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
 	.init_irq	= omap3_beagle_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4c4d7f8d..5efc2e9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -22,34 +22,74 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
+#include <linux/interrupt.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/usb/otg.h>
+#include <linux/smsc911x.h>
+
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/mcspi.h>
+#include <plat/board.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/mcspi.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_EVM_TS_GPIO	175
+#define OMAP3_EVM_EHCI_VBUS	22
+#define OMAP3_EVM_EHCI_SELECT	61
 
 #define OMAP3EVM_ETHR_START	0x2c000000
 #define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_ID_REV	0x50
 #define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMC911X_CS	5
+#define OMAP3EVM_SMSC911X_CS	5
 
-static struct resource omap3evm_smc911x_resources[] = {
+static u8 omap3_evm_version;
+
+u8 get_omap3_evm_rev(void)
+{
+	return omap3_evm_version;
+}
+EXPORT_SYMBOL(get_omap3_evm_rev);
+
+static void __init omap3_evm_get_revision(void)
+{
+	void __iomem *ioaddr;
+	unsigned int smsc_id;
+
+	/* Ethernet PHY ID is stored at ID_REV register */
+	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
+	if (!ioaddr)
+		return;
+	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
+	iounmap(ioaddr);
+
+	switch (smsc_id) {
+	/*SMSC9115 chipset*/
+	case 0x01150000:
+		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
+		break;
+	/*SMSC 9220 chipset*/
+	case 0x92200000:
+	default:
+		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+	}
+}
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource omap3evm_smsc911x_resources[] = {
 	[0] =	{
 		.start	= OMAP3EVM_ETHR_START,
 		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
@@ -58,24 +98,34 @@
 	[1] =	{
 		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
 	},
 };
 
-static struct platform_device omap3evm_smc911x_device = {
-	.name		= "smc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
-	.resource	= &omap3evm_smc911x_resources[0],
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface  = PHY_INTERFACE_MODE_MII,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags          = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
 };
 
-static inline void __init omap3evm_init_smc911x(void)
+static struct platform_device omap3evm_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(omap3evm_smsc911x_resources),
+	.resource	= &omap3evm_smsc911x_resources[0],
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static inline void __init omap3evm_init_smsc911x(void)
 {
 	int eth_cs;
 	struct clk *l3ck;
 	unsigned int rate;
 
-	eth_cs = OMAP3EVM_SMC911X_CS;
+	eth_cs = OMAP3EVM_SMSC911X_CS;
 
 	l3ck = clk_get(NULL, "l3_ck");
 	if (IS_ERR(l3ck))
@@ -83,15 +133,58 @@
 	else
 		rate = clk_get_rate(l3ck);
 
-	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
 			OMAP3EVM_ETHR_GPIO_IRQ);
 		return;
 	}
 
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+	platform_device_register(&omap3evm_smsc911x_device);
 }
 
+#else
+static inline void __init omap3evm_init_smsc911x(void) { return; }
+#endif
+
+static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply omap3evm_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3evm_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3evm_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vsim_supply,
+};
+
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -134,6 +227,10 @@
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	omap3evm_vmmc1_supply.dev = mmc[0].dev;
+	omap3evm_vsim_supply.dev = mmc[0].dev;
+
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -194,6 +291,15 @@
 	.irq_line	= 1,
 };
 
+static struct twl4030_codec_audio_data omap3evm_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3evm_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &omap3evm_audio_data,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -203,6 +309,7 @@
 	.madc		= &omap3evm_madc_data,
 	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
+	.codec		= &omap3evm_codec_data,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -216,6 +323,13 @@
 
 static int __init omap3_evm_i2c_init(void)
 {
+	/*
+	 * REVISIT: These entries can be set in omap3evm_twl_data
+	 * after a merge with MFD tree
+	 */
+	omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
+	omap3evm_twldata.vsim = &omap3evm_vsim;
+
 	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
 			ARRAY_SIZE(omap3evm_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
@@ -289,16 +403,29 @@
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	omap3evm_init_smc911x();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
-	&omap3evm_smc911x_device,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	/* PHY reset GPIO will be runtime programmed based on EVM version */
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
 };
 
 static void __init omap3_evm_init(void)
 {
+	omap3_evm_get_revision();
+
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
@@ -311,8 +438,32 @@
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
 #endif
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+		/* enable EHCI VBUS using GPIO22 */
+		omap_cfg_reg(AF9_34XX_GPIO22);
+		gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
+		gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
+		gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
+
+		/* Select EHCI port on main board */
+		omap_cfg_reg(U3_34XX_GPIO61);
+		gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
+		gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
+		gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
+
+		/* setup EHCI phy reset config */
+		omap_cfg_reg(AH14_34XX_GPIO21);
+		ehci_pdata.reset_gpio_port[1] = 21;
+
+	} else {
+		/* setup EHCI phy reset on MDC */
+		omap_cfg_reg(AF4_34XX_GPIO135_OUT);
+		ehci_pdata.reset_gpio_port[1] = 135;
+	}
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	ads7846_dev_init();
+	omap3evm_init_smsc911x();
 }
 
 static void __init omap3_evm_map_io(void)
@@ -324,7 +475,7 @@
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
 	.init_irq	= omap3_evm_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7519edb..2db5ba5 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -34,13 +34,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
 #include <mach/hardware.h>
-#include <mach/mcspi.h>
-#include <mach/usb.h>
-#include <mach/mux.h>
+#include <plat/mcspi.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -281,11 +281,21 @@
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static struct twl4030_codec_audio_data omap3pandora_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3pandora_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &omap3pandora_audio_data,
+};
+
 static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
 	.keypad		= &pandora_kp_data,
@@ -387,6 +397,18 @@
 	&pandora_keys_gpio,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 16,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
 static void __init omap3pandora_init(void)
 {
 	omap3pandora_i2c_init();
@@ -396,6 +418,7 @@
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	usb_ehci_init(&ehci_pdata);
 	pandora_keys_gpio_init();
 	usb_musb_init();
 
@@ -412,7 +435,7 @@
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3pandora_map_io,
 	.init_irq	= omap3pandora_init_irq,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9917d2f..52dfd51 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -38,14 +38,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 #include <mach/hardware.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/nand.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -67,7 +67,7 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
@@ -329,6 +329,15 @@
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+static struct twl4030_codec_audio_data overo_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data overo_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &overo_audio_data,
+};
+
 /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
 
 static struct twl4030_platform_data overo_twldata = {
@@ -336,6 +345,7 @@
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
 	.usb		= &overo_usb_data,
+	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
 };
 
@@ -384,6 +394,18 @@
 	&overo_lcd_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+
 static void __init overo_init(void)
 {
 	overo_i2c_init();
@@ -391,6 +413,7 @@
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
@@ -433,14 +456,6 @@
 	else
 		printk(KERN_ERR "could not obtain gpio for "
 					"OVERO_GPIO_USBH_CPEN\n");
-
-	if ((gpio_request(OVERO_GPIO_USBH_NRESET,
-			  "OVERO_GPIO_USBH_NRESET") == 0) &&
-	    (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
-		gpio_export(OVERO_GPIO_USBH_NRESET, 0);
-	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_NRESET\n");
 }
 
 static void __init overo_map_io(void)
@@ -451,7 +466,7 @@
 
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
 	.init_irq	= overo_init_irq,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e34d96a..15ce651 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -14,28 +14,137 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/wl12xx.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/onenand.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
+#define RX51_WL1251_POWER_GPIO		87
+#define RX51_WL1251_IRQ_GPIO		42
+
+/* list all spi devices here */
+enum {
+	RX51_SPI_WL1251,
+};
+
+static struct wl12xx_platform_data wl1251_pdata;
+
+static struct omap2_mcspi_device_config wl1251_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
+static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
+	[RX51_SPI_WL1251] = {
+		.modalias		= "wl1251",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz   	= 48000000,
+		.mode                   = SPI_MODE_2,
+		.controller_data	= &wl1251_mcspi_config,
+		.platform_data		= &wl1251_pdata,
+	},
+};
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+
+#define RX51_GPIO_CAMERA_LENS_COVER	110
+#define RX51_GPIO_CAMERA_FOCUS		68
+#define RX51_GPIO_CAMERA_CAPTURE	69
+#define RX51_GPIO_KEYPAD_SLIDE		71
+#define RX51_GPIO_LOCK_BUTTON		113
+#define RX51_GPIO_PROXIMITY		89
+
+#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
+
+static struct gpio_keys_button rx51_gpio_keys[] = {
+	{
+		.desc			= "Camera Lens Cover",
+		.type			= EV_SW,
+		.code			= SW_CAMERA_LENS_COVER,
+		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Camera Focus",
+		.type			= EV_KEY,
+		.code			= KEY_CAMERA_FOCUS,
+		.gpio			= RX51_GPIO_CAMERA_FOCUS,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Camera Capture",
+		.type			= EV_KEY,
+		.code			= KEY_CAMERA,
+		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Lock Button",
+		.type			= EV_KEY,
+		.code			= KEY_SCREENLOCK,
+		.gpio			= RX51_GPIO_LOCK_BUTTON,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Keypad Slide",
+		.type			= EV_SW,
+		.code			= SW_KEYPAD_SLIDE,
+		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Proximity Sensor",
+		.type			= EV_SW,
+		.code			= SW_FRONT_PROXIMITY,
+		.gpio			= RX51_GPIO_PROXIMITY,
+		.active_low		= 0,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}
+};
+
+static struct gpio_keys_platform_data rx51_gpio_keys_data = {
+	.buttons	= rx51_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
+};
+
+static struct platform_device rx51_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &rx51_gpio_keys_data,
+	},
+};
+
+static void __init rx51_add_gpio_keys(void)
+{
+	platform_device_register(&rx51_gpio_keys_device);
+}
+#else
+static void __init rx51_add_gpio_keys(void)
+{
+}
+#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
+
 static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
@@ -536,10 +645,64 @@
 
 #endif
 
+static void rx51_wl1251_set_power(bool enable)
+{
+	gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
+}
+
+static void __init rx51_init_wl1251(void)
+{
+	int irq, ret;
+
+	ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
+	if (ret < 0)
+		goto error;
+
+	ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
+	if (ret < 0)
+		goto err_power;
+
+	ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto err_power;
+
+	ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
+	if (ret < 0)
+		goto err_irq;
+
+	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
+	if (irq < 0)
+		goto err_irq;
+
+	wl1251_pdata.set_power = rx51_wl1251_set_power;
+	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
+
+	return;
+
+err_irq:
+	gpio_free(RX51_WL1251_IRQ_GPIO);
+
+err_power:
+	gpio_free(RX51_WL1251_POWER_GPIO);
+
+error:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+	wl1251_pdata.set_power = NULL;
+
+	/*
+	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
+	 * set_power is null, and wl1251_probe() will fail.
+	 */
+}
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
 	board_onenand_init();
 	board_smc91x_init();
+	rx51_add_gpio_keys();
+	rx51_init_wl1251();
+	spi_register_board_info(rx51_peripherals_spi_board_info,
+				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/board-rx51-sdram.c
new file mode 100644
index 0000000..f392844
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-sdram.c
@@ -0,0 +1,221 @@
+/*
+ * SDRC register values for RX51
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * Original code by Juha Yrjola <juha.yrjola@solidboot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/io.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sdrc.h>
+
+
+/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
+struct sdram_timings {
+	u32 casl;
+	u32 tDAL;
+	u32 tDPL;
+	u32 tRRD;
+	u32 tRCD;
+	u32 tRP;
+	u32 tRAS;
+	u32 tRC;
+	u32 tRFC;
+	u32 tXSR;
+
+	u32 tREF; /* in ns */
+
+	u32 tXP;
+	u32 tCKE;
+	u32 tWTR;
+};
+
+struct omap_sdrc_params rx51_sdrc_params[4];
+
+static const struct sdram_timings rx51_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 33000,
+		.tDPL = 15000,
+		.tRRD = 12000,
+		.tRCD = 22500,
+		.tRP = 18000,
+		.tRAS = 42000,
+		.tRC = 66000,
+		.tRFC = 138000,
+		.tXSR = 200000,
+
+		.tREF = 7800,
+
+		.tXP = 2,
+		.tCKE = 2,
+		.tWTR = 2
+	},
+};
+
+static unsigned long sdrc_get_fclk_period(long rate)
+{
+	/* In picoseconds */
+	return 1000000000 / rate;
+}
+
+static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate)
+{
+	unsigned long tick_ps;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = sdrc_get_fclk_period(rate);
+
+	return (time_ps + tick_ps - 1) / tick_ps;
+}
+#undef DEBUG
+#ifdef DEBUG
+static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
+				int ticks, long rate, const char *name)
+#else
+static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
+			       int ticks)
+#endif
+{
+	int mask, nr_bits;
+
+	nr_bits = end_bit - st_bit + 1;
+	if (ticks >= 1 << nr_bits)
+		return -1;
+	mask = (1 << nr_bits) - 1;
+	*regval &= ~(mask << st_bit);
+	*regval |= ticks << st_bit;
+#ifdef DEBUG
+	printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks,
+			(unsigned int)sdrc_get_fclk_period(rate) * ticks /
+			1000);
+#endif
+
+	return 0;
+}
+
+#ifdef DEBUG
+#define SDRC_SET_ONE(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval((reg), (st), (end), \
+			rx51_timings->field, (rate), #field) < 0) \
+		err = -1;
+#else
+#define SDRC_SET_ONE(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval((reg), (st), (end), \
+			rx51_timings->field) < 0) \
+		err = -1;
+#endif
+
+#ifdef DEBUG
+static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
+				int time, long rate, const char *name)
+#else
+static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
+				int time, long rate)
+#endif
+{
+	int ticks, ret;
+	ret = 0;
+
+	if (time == 0)
+		ticks = 0;
+	else
+		ticks = sdrc_ps_to_ticks(time, rate);
+
+#ifdef DEBUG
+	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks,
+				     rate, name);
+#else
+	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks);
+#endif
+
+	return ret;
+}
+
+#ifdef DEBUG
+#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
+			rx51_timings->field, \
+			(rate), #field) < 0) \
+		err = -1;
+
+#else
+#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
+			rx51_timings->field, (rate)) < 0) \
+		err = -1;
+#endif
+
+static int sdrc_timings(int id, long rate)
+{
+	u32 ticks_per_ms;
+	u32 rfr, l;
+	u32 actim_ctrla = 0, actim_ctrlb = 0;
+	u32 rfr_ctrl;
+	int err = 0;
+	long l3_rate = rate / 1000;
+
+	SDRC_SET_ONE_PS(&actim_ctrla,  0,  4, tDAL, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla,  6,  8, tDPL, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla,  9, 11, tRRD, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate);
+
+	SDRC_SET_ONE_PS(&actim_ctrlb,  0,  7, tXSR, l3_rate);
+
+	SDRC_SET_ONE(&actim_ctrlb,  8, 10, tXP, l3_rate);
+	SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate);
+	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
+
+	ticks_per_ms = l3_rate;
+	rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000;
+	if (rfr > 65535 + 50)
+		rfr = 65535;
+	else
+		rfr -= 50;
+
+#ifdef DEBUG
+	printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr);
+#endif
+
+	l = rfr << 8;
+	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
+
+	rx51_sdrc_params[id].rate = rate;
+	rx51_sdrc_params[id].actim_ctrla = actim_ctrla;
+	rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb;
+	rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl;
+	rx51_sdrc_params[id].mr = 0x32;
+
+	rx51_sdrc_params[id + 1].rate = 0;
+
+	return err;
+}
+
+struct omap_sdrc_params *rx51_get_sdram_timings(void)
+{
+	int err;
+
+	err = sdrc_timings(0, 41500000);
+	err |= sdrc_timings(1, 83000000);
+	err |= sdrc_timings(2, 166000000);
+
+	return &rx51_sdrc_params[0];
+}
+
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 78869a9..1bb1de2 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -22,13 +22,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
@@ -55,9 +57,12 @@
 
 static void __init rx51_init_irq(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
-	omap2_init_common_hw(NULL, NULL);
+	sdrc_params = rx51_get_sdram_timings();
+	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -84,7 +89,7 @@
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
 	.init_irq	= rx51_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1f13e2a..bb4018b 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,20 +14,20 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#define ZOOM2_SMSC911X_CS	7
-#define ZOOM2_SMSC911X_GPIO	158
-#define ZOOM2_QUADUART_CS	3
-#define ZOOM2_QUADUART_GPIO	102
+#define ZOOM_SMSC911X_CS	7
+#define ZOOM_SMSC911X_GPIO	158
+#define ZOOM_QUADUART_CS	3
+#define ZOOM_QUADUART_GPIO	102
 #define QUART_CLK		1843200
 #define DEBUG_BASE		0x08000000
-#define ZOOM2_ETHR_START	DEBUG_BASE
+#define ZOOM_ETHR_START	DEBUG_BASE
 
-static struct resource zoom2_smsc911x_resources[] = {
+static struct resource zoom_smsc911x_resources[] = {
 	[0] = {
-		.start	= ZOOM2_ETHR_START,
-		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.start	= ZOOM_ETHR_START,
+		.end	= ZOOM_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -35,42 +35,42 @@
 	},
 };
 
-static struct smsc911x_platform_config zoom2_smsc911x_config = {
+static struct smsc911x_platform_config zoom_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct platform_device zoom2_smsc911x_device = {
+static struct platform_device zoom_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
-	.resource	= zoom2_smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(zoom_smsc911x_resources),
+	.resource	= zoom_smsc911x_resources,
 	.dev		= {
-		.platform_data = &zoom2_smsc911x_config,
+		.platform_data = &zoom_smsc911x_config,
 	},
 };
 
-static inline void __init zoom2_init_smsc911x(void)
+static inline void __init zoom_init_smsc911x(void)
 {
 	int eth_cs;
 	unsigned long cs_mem_base;
 	int eth_gpio = 0;
 
-	eth_cs = ZOOM2_SMSC911X_CS;
+	eth_cs = ZOOM_SMSC911X_CS;
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
 		return;
 	}
 
-	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+	zoom_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom_smsc911x_resources[0].end   = cs_mem_base + 0xff;
 
-	eth_gpio = ZOOM2_SMSC911X_GPIO;
+	eth_gpio = ZOOM_SMSC911X_GPIO;
 
-	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+	zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
 	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
@@ -94,7 +94,7 @@
 	}
 };
 
-static struct platform_device zoom2_debugboard_serial_device = {
+static struct platform_device zoom_debugboard_serial_device = {
 	.name			= "serial8250",
 	.id			= 3,
 	.dev			= {
@@ -102,13 +102,13 @@
 	},
 };
 
-static inline void __init zoom2_init_quaduart(void)
+static inline void __init zoom_init_quaduart(void)
 {
 	int quart_cs;
 	unsigned long cs_mem_base;
 	int quart_gpio = 0;
 
-	quart_cs = ZOOM2_QUADUART_CS;
+	quart_cs = ZOOM_QUADUART_CS;
 
 	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem"
@@ -116,7 +116,7 @@
 		return;
 	}
 
-	quart_gpio = ZOOM2_QUADUART_GPIO;
+	quart_gpio = ZOOM_QUADUART_GPIO;
 
 	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
@@ -126,15 +126,15 @@
 	gpio_direction_input(quart_gpio);
 }
 
-static inline int omap_zoom2_debugboard_detect(void)
+static inline int omap_zoom_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
 	int ret = 1;
 
-	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+	debug_board_detect = ZOOM_SMSC911X_GPIO;
 
-	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+	if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
 		"board detect\n", debug_board_detect);
 		return 0;
 	}
@@ -147,17 +147,17 @@
 	return ret;
 }
 
-static struct platform_device *zoom2_devices[] __initdata = {
-	&zoom2_smsc911x_device,
-	&zoom2_debugboard_serial_device,
+static struct platform_device *zoom_devices[] __initdata = {
+	&zoom_smsc911x_device,
+	&zoom_debugboard_serial_device,
 };
 
-int __init omap_zoom2_debugboard_init(void)
+int __init zoom_debugboard_init(void)
 {
-	if (!omap_zoom2_debugboard_detect())
+	if (!omap_zoom_debugboard_detect())
 		return 0;
 
-	zoom2_init_smsc911x();
-	zoom2_init_quaduart();
-	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+	zoom_init_smsc911x();
+	zoom_init_quaduart();
+	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
new file mode 100755
index 0000000..f14baa3
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -0,0 +1,267 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * Modified from mach-omap2/board-zoom2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mmc-twl4030.h"
+
+/* Zoom2 has Qwerty keyboard*/
+static int board_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+	KEY(1, 0, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(2, 3, KEY_END),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_ENTER),
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(6, 7, KEY_SELECT),
+	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
+	KEY(7, 5, KEY_RIGHT),
+	KEY(7, 6, KEY_UP),
+	KEY(7, 7, KEY_DOWN)
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data zoom_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 8,
+	.cols		= 8,
+	.rep		= 1,
+};
+
+static struct regulator_consumer_supply zoom_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ),
+	 * gpio + 1 is "mmc1_cd" (input/IRQ)
+	 */
+	mmc[0].gpio_cd = gpio + 0;
+	mmc[1].gpio_cd = gpio + 1;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom_vmmc1_supply.dev = mmc[0].dev;
+	zoom_vsim_supply.dev = mmc[0].dev;
+	zoom_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+
+static int zoom_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data zoom_bci_data = {
+	.battery_tmp_tbl	= zoom_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom_batt_table),
+};
+
+static struct twl4030_usb_data zoom_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_gpio_platform_data zoom_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_codec_audio_data zoom_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &zoom_audio_data,
+};
+
+static struct twl4030_platform_data zoom_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.bci		= &zoom_bci_data,
+	.madc		= &zoom_madc_data,
+	.usb		= &zoom_usb_data,
+	.gpio		= &zoom_gpio_data,
+	.keypad		= &zoom_kp_twl4030_data,
+	.codec		= &zoom_codec_data,
+	.vmmc2          = &zoom_vmmc2,
+	.vsim           = &zoom_vsim,
+
+};
+
+static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl5030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
+			ARRAY_SIZE(zoom_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+void __init zoom_peripherals_init(void)
+{
+	omap_i2c_init();
+	omap_serial_init();
+	usb_musb_init();
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 51e0b3b..d94d047 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,223 +13,42 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/usb.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
-#include "mmc-twl4030.h"
+#include <mach/board-zoom.h>
+
 #include "sdram-micron-mt46h32m32lf-6.h"
 
-/* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_ENTER),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_SELECT),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 5, KEY_RIGHT),
-	KEY(7, 6, KEY_UP),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
-	.supply		= "vmmc",
-};
-
-static struct regulator_consumer_supply zoom2_vsim_supply = {
-	.supply		= "vmmc_aux",
-};
-
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
-	.supply		= "vmmc",
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vsim_supply,
-};
-
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{}      /* Terminator */
-};
-
-static int zoom2_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(mmc);
-
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom2_vmmc1_supply.dev = mmc[0].dev;
-	zoom2_vsim_supply.dev = mmc[0].dev;
-	zoom2_vmmc2_supply.dev = mmc[1].dev;
-
-	return 0;
-}
-
-
-static int zoom2_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom2_bci_data = {
-	.battery_tmp_tbl	= zoom2_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
-};
-
-static struct twl4030_usb_data zoom2_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
-
 static void __init omap_zoom2_init_irq(void)
 {
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 				 mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= zoom2_twl_gpio_setup,
-};
+/* REVISIT: These audio entries can be removed once MFD code is merged */
+#if 0
 
 static struct twl4030_madc_platform_data zoom2_madc_data = {
 	.irq_line	= 1,
 };
 
+static struct twl4030_codec_audio_data zoom2_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom2_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &zoom2_audio_data,
+};
+
 static struct twl4030_platform_data zoom2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -240,38 +59,19 @@
 	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
 	.keypad		= &zoom2_kp_twl4030_data,
+	.codec		= &zoom2_codec_data,
 	.vmmc1          = &zoom2_vmmc1,
 	.vmmc2          = &zoom2_vmmc2,
 	.vsim           = &zoom2_vsim,
 
 };
 
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl4030", 0x48),
-		.flags		= I2C_CLIENT_WAKE,
-		.irq		= INT_34XX_SYS_NIRQ,
-		.platform_data	= &zoom2_twldata,
-	},
-};
-
-static int __init omap_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
-			ARRAY_SIZE(zoom2_i2c_boardinfo));
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-extern int __init omap_zoom2_debugboard_init(void);
+#endif
 
 static void __init omap_zoom2_init(void)
 {
-	omap_i2c_init();
-	omap_serial_init();
-	omap_zoom2_debugboard_init();
-	usb_musb_init();
+	zoom_peripherals_init();
+	zoom_debugboard_init();
 }
 
 static void __init omap_zoom2_map_io(void)
@@ -282,7 +82,7 @@
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
 	.init_irq	= omap_zoom2_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
new file mode 100644
index 0000000..8d965a6
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/board-zoom.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+static void __init omap_zoom_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel zoom_config[] __initdata = {
+};
+
+static void __init omap_zoom_init_irq(void)
+{
+	omap_board_config = zoom_config;
+	omap_board_config_size = ARRAY_SIZE(zoom_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init omap_zoom_init(void)
+{
+	zoom_peripherals_init();
+	zoom_debugboard_init();
+}
+
+MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom_map_io,
+	.init_irq	= omap_zoom_init_irq,
+	.init_machine	= omap_zoom_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f2a92d6..4716206 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -24,13 +24,13 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
-#include <mach/clockdomain.h>
-#include <mach/cpu.h>
-#include <mach/prcm.h>
+#include <plat/clock.h>
+#include <plat/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
 #include <asm/div64.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9ae7540..43b6bed 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index e2dbedd..e70e7e0 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,13 +28,13 @@
 #include <linux/cpufreq.h>
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/prcm.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/prcm.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 7c5c00d..9f2feaf 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,13 +27,13 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
-#include <mach/cpu.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "clock.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
@@ -119,7 +119,7 @@
 	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
 	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
 	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
-	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
 	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
 	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
 	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
@@ -138,7 +138,7 @@
 	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
 	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
 	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
-	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
 	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
 	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
 	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
@@ -147,7 +147,7 @@
 	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
 	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
 	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
-	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
 	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
 	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
 	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
@@ -302,7 +302,7 @@
 	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
 	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
 	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
-	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
+	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_343X),
 	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
 	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
 	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9565c05..8fe1bcb 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <mach/control.h>
+#include <plat/control.h>
 
 #include "clock.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 58aff84..fcd8232 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -28,14 +28,14 @@
 
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 /* clkdm_list contains all registered struct clockdomains */
 static LIST_HEAD(clkdm_list);
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index fe319ae..c4ee076 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 
 /*
  * OMAP2/3-common clockdomains
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index cfd0b72..a2fcfcc2 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global CM registers
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 5f3aad9..cdd1f35 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,11 +15,127 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/sdrc.h>
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "prm.h"
+#include "sdrc.h"
 
 static void __iomem *omap2_ctrl_base;
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+struct omap3_scratchpad {
+	u32 boot_config_ptr;
+	u32 public_restore_ptr;
+	u32 secure_ram_restore_ptr;
+	u32 sdrc_module_semaphore;
+	u32 prcm_block_offset;
+	u32 sdrc_block_offset;
+};
+
+struct omap3_scratchpad_prcm_block {
+	u32 prm_clksrc_ctrl;
+	u32 prm_clksel;
+	u32 cm_clksel_core;
+	u32 cm_clksel_wkup;
+	u32 cm_clken_pll;
+	u32 cm_autoidle_pll;
+	u32 cm_clksel1_pll;
+	u32 cm_clksel2_pll;
+	u32 cm_clksel3_pll;
+	u32 cm_clken_pll_mpu;
+	u32 cm_autoidle_pll_mpu;
+	u32 cm_clksel1_pll_mpu;
+	u32 cm_clksel2_pll_mpu;
+	u32 prcm_block_size;
+};
+
+struct omap3_scratchpad_sdrc_block {
+	u16 sysconfig;
+	u16 cs_cfg;
+	u16 sharing;
+	u16 err_type;
+	u32 dll_a_ctrl;
+	u32 dll_b_ctrl;
+	u32 power;
+	u32 cs_0;
+	u32 mcfg_0;
+	u16 mr_0;
+	u16 emr_1_0;
+	u16 emr_2_0;
+	u16 emr_3_0;
+	u32 actim_ctrla_0;
+	u32 actim_ctrlb_0;
+	u32 rfr_ctrl_0;
+	u32 cs_1;
+	u32 mcfg_1;
+	u16 mr_1;
+	u16 emr_1_1;
+	u16 emr_2_1;
+	u16 emr_3_1;
+	u32 actim_ctrla_1;
+	u32 actim_ctrlb_1;
+	u32 rfr_ctrl_1;
+	u16 dcdl_1_ctrl;
+	u16 dcdl_2_ctrl;
+	u32 flags;
+	u32 block_size;
+};
+
+void *omap3_secure_ram_storage;
+
+/*
+ * This is used to store ARM registers in SDRAM before attempting
+ * an MPU OFF. The save and restore happens from the SRAM sleep code.
+ * The address is stored in scratchpad, so that it can be used
+ * during the restore path.
+ */
+u32 omap3_arm_context[128];
+
+struct omap3_control_regs {
+	u32 sysconfig;
+	u32 devconf0;
+	u32 mem_dftrw0;
+	u32 mem_dftrw1;
+	u32 msuspendmux_0;
+	u32 msuspendmux_1;
+	u32 msuspendmux_2;
+	u32 msuspendmux_3;
+	u32 msuspendmux_4;
+	u32 msuspendmux_5;
+	u32 sec_ctrl;
+	u32 devconf1;
+	u32 csirxfe;
+	u32 iva2_bootaddr;
+	u32 iva2_bootmod;
+	u32 debobs_0;
+	u32 debobs_1;
+	u32 debobs_2;
+	u32 debobs_3;
+	u32 debobs_4;
+	u32 debobs_5;
+	u32 debobs_6;
+	u32 debobs_7;
+	u32 debobs_8;
+	u32 prog_io0;
+	u32 prog_io1;
+	u32 dss_dpll_spreading;
+	u32 core_dpll_spreading;
+	u32 per_dpll_spreading;
+	u32 usbhost_dpll_spreading;
+	u32 pbias_lite;
+	u32 temp_sensor;
+	u32 sramldo4;
+	u32 sramldo5;
+	u32 csi;
+};
+
+static struct omap3_control_regs control_context;
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
 #define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
@@ -62,3 +178,268 @@
 	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+/*
+ * Clears the scratchpad contents in case of cold boot-
+ * called during bootup
+ */
+void omap3_clear_scratchpad_contents(void)
+{
+	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
+	u32 *v_addr;
+	u32 offset = 0;
+	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
+	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+		OMAP3430_GLOBAL_COLD_RST) {
+		for ( ; offset <= max_offset; offset += 0x4)
+			__raw_writel(0x0, (v_addr + offset));
+		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
+			OMAP3_PRM_RSTST_OFFSET);
+	}
+}
+
+/* Populate the scratchpad structure with restore structure */
+void omap3_save_scratchpad_contents(void)
+{
+	void * __iomem scratchpad_address;
+	u32 arm_context_addr;
+	struct omap3_scratchpad scratchpad_contents;
+	struct omap3_scratchpad_prcm_block prcm_block_contents;
+	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
+
+	/* Populate the Scratchpad contents */
+	scratchpad_contents.boot_config_ptr = 0x0;
+	if (omap_rev() != OMAP3430_REV_ES3_0 &&
+					omap_rev() != OMAP3430_REV_ES3_1)
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_restore_pointer());
+	else
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_es3_restore_pointer());
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+		scratchpad_contents.secure_ram_restore_ptr = 0x0;
+	else
+		scratchpad_contents.secure_ram_restore_ptr =
+			(u32) __pa(omap3_secure_ram_storage);
+	scratchpad_contents.sdrc_module_semaphore = 0x0;
+	scratchpad_contents.prcm_block_offset = 0x2C;
+	scratchpad_contents.sdrc_block_offset = 0x64;
+
+	/* Populate the PRCM block contents */
+	prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
+			OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+	prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
+			OMAP3_PRM_CLKSEL_OFFSET);
+	prcm_block_contents.cm_clksel_core =
+			cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+	prcm_block_contents.cm_clksel_wkup =
+			cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	prcm_block_contents.cm_clken_pll =
+			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	prcm_block_contents.cm_autoidle_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	prcm_block_contents.cm_clksel1_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	prcm_block_contents.cm_clksel2_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	prcm_block_contents.cm_clksel3_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+	prcm_block_contents.cm_clken_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+	prcm_block_contents.cm_autoidle_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	prcm_block_contents.cm_clksel1_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	prcm_block_contents.cm_clksel2_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	prcm_block_contents.prcm_block_size = 0x0;
+
+	/* Populate the SDRC block contents */
+	sdrc_block_contents.sysconfig =
+			(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
+	sdrc_block_contents.cs_cfg =
+			(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
+	sdrc_block_contents.sharing =
+			(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
+	sdrc_block_contents.err_type =
+			(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
+	sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
+	sdrc_block_contents.dll_b_ctrl = 0x0;
+	/*
+	 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
+	 * be programed to issue automatic self refresh on timeout
+	 * of AUTO_CNT = 1 prior to any transition to OFF mode.
+	 */
+	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
+			&& (omap_rev() >= OMAP3430_REV_ES3_0))
+		sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
+				~(SDRC_POWER_AUTOCOUNT_MASK|
+				SDRC_POWER_CLKCTRL_MASK)) |
+				(1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
+				SDRC_SELF_REFRESH_ON_AUTOCOUNT;
+	else
+		sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
+
+	sdrc_block_contents.cs_0 = 0x0;
+	sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
+	sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
+	sdrc_block_contents.emr_1_0 = 0x0;
+	sdrc_block_contents.emr_2_0 = 0x0;
+	sdrc_block_contents.emr_3_0 = 0x0;
+	sdrc_block_contents.actim_ctrla_0 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
+	sdrc_block_contents.actim_ctrlb_0 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
+	sdrc_block_contents.rfr_ctrl_0 =
+			sdrc_read_reg(SDRC_RFR_CTRL_0);
+	sdrc_block_contents.cs_1 = 0x0;
+	sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
+	sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
+	sdrc_block_contents.emr_1_1 = 0x0;
+	sdrc_block_contents.emr_2_1 = 0x0;
+	sdrc_block_contents.emr_3_1 = 0x0;
+	sdrc_block_contents.actim_ctrla_1 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
+	sdrc_block_contents.actim_ctrlb_1 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
+	sdrc_block_contents.rfr_ctrl_1 =
+			sdrc_read_reg(SDRC_RFR_CTRL_1);
+	sdrc_block_contents.dcdl_1_ctrl = 0x0;
+	sdrc_block_contents.dcdl_2_ctrl = 0x0;
+	sdrc_block_contents.flags = 0x0;
+	sdrc_block_contents.block_size = 0x0;
+
+	arm_context_addr = virt_to_phys(omap3_arm_context);
+
+	/* Copy all the contents to the scratchpad location */
+	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+	memcpy_toio(scratchpad_address, &scratchpad_contents,
+		 sizeof(scratchpad_contents));
+	/* Scratchpad contents being 32 bits, a divide by 4 done here */
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.prcm_block_offset,
+		&prcm_block_contents, sizeof(prcm_block_contents));
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.sdrc_block_offset,
+		&sdrc_block_contents, sizeof(sdrc_block_contents));
+	/*
+	 * Copies the address of the location in SDRAM where ARM
+	 * registers get saved during a MPU OFF transition.
+	 */
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.sdrc_block_offset +
+		sizeof(sdrc_block_contents), &arm_context_addr, 4);
+}
+
+void omap3_control_save_context(void)
+{
+	control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
+	control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	control_context.mem_dftrw0 =
+			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
+	control_context.mem_dftrw1 =
+			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
+	control_context.msuspendmux_0 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
+	control_context.msuspendmux_1 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
+	control_context.msuspendmux_2 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
+	control_context.msuspendmux_3 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
+	control_context.msuspendmux_4 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
+	control_context.msuspendmux_5 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
+	control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
+	control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+	control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
+	control_context.iva2_bootaddr =
+			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
+	control_context.iva2_bootmod =
+			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
+	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
+	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
+	control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
+	control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
+	control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
+	control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
+	control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
+	control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
+	control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
+	control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+	control_context.dss_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+	control_context.core_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+	control_context.per_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
+	control_context.usbhost_dpll_spreading =
+		omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+	control_context.pbias_lite =
+			omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+	control_context.temp_sensor =
+			omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
+	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
+	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
+	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
+	return;
+}
+
+void omap3_control_restore_context(void)
+{
+	omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
+	omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
+	omap_ctrl_writel(control_context.mem_dftrw0,
+					OMAP343X_CONTROL_MEM_DFTRW0);
+	omap_ctrl_writel(control_context.mem_dftrw1,
+					OMAP343X_CONTROL_MEM_DFTRW1);
+	omap_ctrl_writel(control_context.msuspendmux_0,
+					OMAP2_CONTROL_MSUSPENDMUX_0);
+	omap_ctrl_writel(control_context.msuspendmux_1,
+					OMAP2_CONTROL_MSUSPENDMUX_1);
+	omap_ctrl_writel(control_context.msuspendmux_2,
+					OMAP2_CONTROL_MSUSPENDMUX_2);
+	omap_ctrl_writel(control_context.msuspendmux_3,
+					OMAP2_CONTROL_MSUSPENDMUX_3);
+	omap_ctrl_writel(control_context.msuspendmux_4,
+					OMAP2_CONTROL_MSUSPENDMUX_4);
+	omap_ctrl_writel(control_context.msuspendmux_5,
+					OMAP2_CONTROL_MSUSPENDMUX_5);
+	omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
+	omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
+	omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
+	omap_ctrl_writel(control_context.iva2_bootaddr,
+					OMAP343X_CONTROL_IVA2_BOOTADDR);
+	omap_ctrl_writel(control_context.iva2_bootmod,
+					OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
+	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
+	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
+	omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
+	omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
+	omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
+	omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
+	omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
+	omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
+	omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
+	omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
+	omap_ctrl_writel(control_context.dss_dpll_spreading,
+					OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.core_dpll_spreading,
+					OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.per_dpll_spreading,
+					OMAP343X_CONTROL_PER_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.usbhost_dpll_spreading,
+				OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.pbias_lite,
+					OMAP343X_CONTROL_PBIAS_LITE);
+	omap_ctrl_writel(control_context.temp_sensor,
+					OMAP343X_CONTROL_TEMP_SENSOR);
+	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
+	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
+	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
+	return;
+}
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
new file mode 100644
index 0000000..a26d6a0
--- /dev/null
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -0,0 +1,318 @@
+/*
+ * linux/arch/arm/mach-omap2/cpuidle34xx.c
+ *
+ * OMAP3 CPU IDLE Routines
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/cpuidle.h>
+
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_CPU_IDLE
+
+#define OMAP3_MAX_STATES 7
+#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */
+#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */
+#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */
+#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */
+#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */
+#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
+#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
+
+struct omap3_processor_cx {
+	u8 valid;
+	u8 type;
+	u32 sleep_latency;
+	u32 wakeup_latency;
+	u32 mpu_state;
+	u32 core_state;
+	u32 threshold;
+	u32 flags;
+};
+
+struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
+struct omap3_processor_cx current_cx_state;
+struct powerdomain *mpu_pd, *core_pd;
+
+static int omap3_idle_bm_check(void)
+{
+	if (!omap3_can_sleep())
+		return 1;
+	return 0;
+}
+
+static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
+				struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
+				struct clockdomain *clkdm)
+{
+	omap2_clkdm_deny_idle(clkdm);
+	return 0;
+}
+
+/**
+ * omap3_enter_idle - Programs OMAP3 to enter the specified state
+ * @dev: cpuidle device
+ * @state: The target state to be programmed
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int omap3_enter_idle(struct cpuidle_device *dev,
+			struct cpuidle_state *state)
+{
+	struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+
+	current_cx_state = *cx;
+
+	/* Used to keep track of the total time in idle */
+	getnstimeofday(&ts_preidle);
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!enable_off_mode) {
+		if (mpu_state < PWRDM_POWER_RET)
+			mpu_state = PWRDM_POWER_RET;
+		if (core_state < PWRDM_POWER_RET)
+			core_state = PWRDM_POWER_RET;
+	}
+
+	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
+	pwrdm_set_next_pwrst(core_pd, core_state);
+
+	if (omap_irq_pending() || need_resched())
+		goto return_sleep_time;
+
+	if (cx->type == OMAP3_STATE_C1) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+	}
+
+	/* Execute ARM wfi */
+	omap_sram_idle();
+
+	if (cx->type == OMAP3_STATE_C1) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+	}
+
+return_sleep_time:
+	getnstimeofday(&ts_postidle);
+	ts_idle = timespec_sub(ts_postidle, ts_preidle);
+
+	local_irq_enable();
+	local_fiq_enable();
+
+	return (u32)timespec_to_ns(&ts_idle)/1000;
+}
+
+/**
+ * omap3_enter_idle_bm - Checks for any bus activity
+ * @dev: cpuidle device
+ * @state: The target state to be programmed
+ *
+ * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This
+ * function checks for any pending activity and then programs the
+ * device to the specified or a safer state.
+ */
+static int omap3_enter_idle_bm(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct cpuidle_state *new_state = state;
+
+	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
+		BUG_ON(!dev->safe_state);
+		new_state = dev->safe_state;
+	}
+
+	dev->last_state = new_state;
+	return omap3_enter_idle(dev, new_state);
+}
+
+DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
+
+/* omap3_init_power_states - Initialises the OMAP3 specific C states.
+ *
+ * Below is the desciption of each C state.
+ * 	C1 . MPU WFI + Core active
+ *	C2 . MPU WFI + Core inactive
+ *	C3 . MPU CSWR + Core inactive
+ *	C4 . MPU OFF + Core inactive
+ *	C5 . MPU CSWR + Core CSWR
+ *	C6 . MPU OFF + Core CSWR
+ *	C7 . MPU OFF + Core OFF
+ */
+void omap_init_power_states(void)
+{
+	/* C1 . MPU WFI + Core active */
+	omap3_power_states[OMAP3_STATE_C1].valid = 1;
+	omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
+	omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
+	omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
+	omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+	omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C2 . MPU WFI + Core inactive */
+	omap3_power_states[OMAP3_STATE_C2].valid = 1;
+	omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
+	omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
+	omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
+	omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C3 . MPU CSWR + Core inactive */
+	omap3_power_states[OMAP3_STATE_C3].valid = 1;
+	omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
+	omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
+	omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
+	omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+	omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C4 . MPU OFF + Core inactive */
+	omap3_power_states[OMAP3_STATE_C4].valid = 1;
+	omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
+	omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
+	omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
+	omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+	omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C5 . MPU CSWR + Core CSWR*/
+	omap3_power_states[OMAP3_STATE_C5].valid = 1;
+	omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
+	omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
+	omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
+	omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+	omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C6 . MPU OFF + Core CSWR */
+	omap3_power_states[OMAP3_STATE_C6].valid = 1;
+	omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
+	omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
+	omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
+	omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+	omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C7 . MPU OFF + Core OFF */
+	omap3_power_states[OMAP3_STATE_C7].valid = 1;
+	omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
+	omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
+	omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
+	omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+	omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+}
+
+struct cpuidle_driver omap3_idle_driver = {
+	.name = 	"omap3_idle",
+	.owner = 	THIS_MODULE,
+};
+
+/**
+ * omap3_idle_init - Init routine for OMAP3 idle
+ *
+ * Registers the OMAP3 specific cpuidle driver with the cpuidle
+ * framework with the valid set of states.
+ */
+int __init omap3_idle_init(void)
+{
+	int i, count = 0;
+	struct omap3_processor_cx *cx;
+	struct cpuidle_state *state;
+	struct cpuidle_device *dev;
+
+	mpu_pd = pwrdm_lookup("mpu_pwrdm");
+	core_pd = pwrdm_lookup("core_pwrdm");
+
+	omap_init_power_states();
+	cpuidle_register_driver(&omap3_idle_driver);
+
+	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		cx = &omap3_power_states[i];
+		state = &dev->states[count];
+
+		if (!cx->valid)
+			continue;
+		cpuidle_set_statedata(state, cx);
+		state->exit_latency = cx->sleep_latency + cx->wakeup_latency;
+		state->target_residency = cx->threshold;
+		state->flags = cx->flags;
+		state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ?
+			omap3_enter_idle_bm : omap3_enter_idle;
+		if (cx->type == OMAP3_STATE_C1)
+			dev->safe_state = state;
+		sprintf(state->name, "C%d", count+1);
+		count++;
+	}
+
+	if (!count)
+		return -EINVAL;
+	dev->state_count = count;
+
+	if (cpuidle_register_device(dev)) {
+		printk(KERN_ERR "%s: CPUidle register device failed\n",
+		       __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+#else
+int __init omap3_idle_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_CPU_IDLE */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index faf7a1e..733d3dc 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,12 +20,12 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/control.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -136,9 +136,10 @@
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
-#define MBOX_REG_SIZE	0x120
+#define MBOX_REG_SIZE   0x120
 
-static struct resource omap2_mbox_resources[] = {
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap_mbox_resources[] = {
 	{
 		.start		= OMAP24XX_MAILBOX_BASE,
 		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -153,8 +154,10 @@
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+#endif
 
-static struct resource omap3_mbox_resources[] = {
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap_mbox_resources[] = {
 	{
 		.start		= OMAP34XX_MAILBOX_BASE,
 		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -165,6 +168,24 @@
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+
+#define OMAP4_MBOX_REG_SIZE	0x130
+static struct resource omap_mbox_resources[] = {
+	{
+		.start          = OMAP44XX_MAILBOX_BASE,
+		.end            = OMAP44XX_MAILBOX_BASE +
+					OMAP4_MBOX_REG_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = INT_44XX_MAIL_U0_MPU,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+#endif
 
 static struct platform_device mbox_device = {
 	.name		= "omap2-mailbox",
@@ -173,12 +194,9 @@
 
 static inline void omap_init_mbox(void)
 {
-	if (cpu_is_omap2420()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
-		mbox_device.resource = omap2_mbox_resources;
-	} else if (cpu_is_omap3430()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
-		mbox_device.resource = omap3_mbox_resources;
+	if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources);
+		mbox_device.resource = omap_mbox_resources;
 	} else {
 		pr_err("%s: platform not supported\n", __func__);
 		return;
@@ -250,7 +268,7 @@
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
@@ -575,7 +593,7 @@
 		}
 	}
 
-	if (cpu_is_omap3430()) {
+	if (cpu_is_omap34xx()) {
 		if (controller_nr == 0) {
 			omap_cfg_reg(N28_3430_MMC1_CLK);
 			omap_cfg_reg(M27_3430_MMC1_CMD);
@@ -609,6 +627,12 @@
 				omap_cfg_reg(AG4_3430_MMC2_DAT2);
 				omap_cfg_reg(AF4_3430_MMC2_DAT3);
 			}
+			if (mmc_controller->slots[0].wires == 8) {
+				omap_cfg_reg(AE4_3430_MMC2_DAT4);
+				omap_cfg_reg(AH3_3430_MMC2_DAT5);
+				omap_cfg_reg(AF3_3430_MMC2_DAT6);
+				omap_cfg_reg(AE3_3430_MMC2_DAT7);
+			}
 		}
 
 		/*
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
new file mode 100644
index 0000000..ec0d984
--- /dev/null
+++ b/arch/arm/mach-omap2/emu.c
@@ -0,0 +1,66 @@
+/*
+ * emu.c
+ *
+ * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+/* Cortex CoreSight components within omap3xxx EMU */
+#define ETM_BASE	(L4_EMU_34XX_PHYS + 0x10000)
+#define DBG_BASE	(L4_EMU_34XX_PHYS + 0x11000)
+#define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
+#define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
+
+static struct amba_device omap3_etb_device = {
+	.dev		= {
+		.init_name = "etb",
+	},
+	.res		= {
+		.start	= ETB_BASE,
+		.end	= ETB_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.periphid	= 0x000bb907,
+};
+
+static struct amba_device omap3_etm_device = {
+	.dev		= {
+		.init_name = "etm",
+	},
+	.res		= {
+		.start	= ETM_BASE,
+		.end	= ETM_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.periphid	= 0x102bb921,
+};
+
+static int __init emu_init(void)
+{
+	amba_device_register(&omap3_etb_device, &iomem_resource);
+	amba_device_register(&omap3_etm_device, &iomem_resource);
+
+	return 0;
+}
+
+subsys_initcall(emu_init);
+
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 54fec53..7bb6922 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -17,9 +17,9 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/onenand.h>
-#include <mach/board.h>
-#include <mach/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
 
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index df99d31..6083e21 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,9 +17,9 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <mach/board.h>
-#include <mach/gpmc.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+#include <plat/gpmc-smc91x.h>
 
 static struct omap_smc91x_platform_data *gpmc_cfg;
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f3c992e..e86f5ca 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -24,9 +24,9 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
@@ -62,6 +62,33 @@
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
 
+/* Structure to save gpmc cs context */
+struct gpmc_cs_config {
+	u32 config1;
+	u32 config2;
+	u32 config3;
+	u32 config4;
+	u32 config5;
+	u32 config6;
+	u32 config7;
+	int is_valid;
+};
+
+/*
+ * Structure to save/restore gpmc context
+ * to support core off on OMAP3
+ */
+struct omap3_gpmc_regs {
+	u32 sysconfig;
+	u32 irqenable;
+	u32 timeout_ctrl;
+	u32 config;
+	u32 prefetch_config1;
+	u32 prefetch_config2;
+	u32 prefetch_control;
+	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
+};
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -261,7 +288,7 @@
 	l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
 	l &= ~(0x0f << 8);
 	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
-	l |= 1 << 6;		/* CSVALID */
+	l |= GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 }
 
@@ -270,7 +297,7 @@
 	u32 l;
 
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	l &= ~(1 << 6);		/* CSVALID */
+	l &= ~GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 }
 
@@ -290,7 +317,7 @@
 	u32 l;
 
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	return l & (1 << 6);
+	return l & GPMC_CONFIG7_CSVALID;
 }
 
 int gpmc_cs_set_reserved(int cs, int reserved)
@@ -516,3 +543,68 @@
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
 	gpmc_mem_init();
 }
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap3_gpmc_regs gpmc_context;
+
+void omap3_gpmc_save_context()
+{
+	int i;
+	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
+	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
+	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
+	gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
+	gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+	gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
+	gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
+	for (i = 0; i < GPMC_CS_NUM; i++) {
+		gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
+		if (gpmc_context.cs_context[i].is_valid) {
+			gpmc_context.cs_context[i].config1 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
+			gpmc_context.cs_context[i].config2 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
+			gpmc_context.cs_context[i].config3 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
+			gpmc_context.cs_context[i].config4 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
+			gpmc_context.cs_context[i].config5 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
+			gpmc_context.cs_context[i].config6 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
+			gpmc_context.cs_context[i].config7 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
+		}
+	}
+}
+
+void omap3_gpmc_restore_context()
+{
+	int i;
+	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
+	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
+	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
+	gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
+	for (i = 0; i < GPMC_CS_NUM; i++) {
+		if (gpmc_context.cs_context[i].is_valid) {
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
+				gpmc_context.cs_context[i].config1);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
+				gpmc_context.cs_context[i].config2);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
+				gpmc_context.cs_context[i].config3);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
+				gpmc_context.cs_context[i].config4);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
+				gpmc_context.cs_context[i].config5);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
+				gpmc_context.cs_context[i].config6);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
+				gpmc_context.cs_context[i].config7);
+		}
+	}
+}
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a98201c..f48a4b2 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,13 +21,14 @@
 
 #include <asm/cputype.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/cpu.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/cpu.h>
 
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 
+u32 omap3_features;
 
 unsigned int omap_rev(void)
 {
@@ -52,11 +53,11 @@
 {
 	u32 val = 0;
 
-	if (cpu_is_omap24xx())
+	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	else if (cpu_is_omap34xx())
+	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
-	else {
+	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
 	}
@@ -155,12 +156,37 @@
 	pr_info("\n");
 }
 
-void __init omap34xx_check_revision(void)
+#define OMAP3_CHECK_FEATURE(status,feat)				\
+	if (((status & OMAP3_ ##feat## _MASK) 				\
+		>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { 	\
+		omap3_features |= OMAP3_HAS_ ##feat;			\
+	}
+
+void __init omap3_check_features(void)
+{
+	u32 status;
+
+	omap3_features = 0;
+
+	status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
+
+	OMAP3_CHECK_FEATURE(status, L2CACHE);
+	OMAP3_CHECK_FEATURE(status, IVA);
+	OMAP3_CHECK_FEATURE(status, SGX);
+	OMAP3_CHECK_FEATURE(status, NEON);
+	OMAP3_CHECK_FEATURE(status, ISP);
+
+	/*
+	 * TODO: Get additional info (where applicable)
+	 *       e.g. Size of L2 cache.
+	 */
+}
+
+void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
 	u8 rev;
-	char *rev_name = "ES1.0";
 
 	/*
 	 * We cannot access revision registers on ES1.0.
@@ -170,7 +196,7 @@
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
-		goto out;
+		return;
 	}
 
 	/*
@@ -183,33 +209,115 @@
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0xff;
 
-	if (hawkeye == 0xb7ae) {
+	switch (hawkeye) {
+	case 0xb7ae:
+		/* Handle 34xx/35xx devices */
 		switch (rev) {
-		case 0:
+		case 0: /* Take care of early samples */
+		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
-			rev_name = "ES2.0";
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
-			rev_name = "ES2.1";
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
-			rev_name = "ES3.0";
 			break;
 		case 4:
-			omap_revision = OMAP3430_REV_ES3_1;
-			rev_name = "ES3.1";
-			break;
+		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
 			omap_revision = OMAP3430_REV_ES3_1;
-			rev_name = "Unknown revision\n";
 		}
+		break;
+	case 0xb868:
+		/* Handle OMAP35xx/AM35xx devices
+		 *
+		 * Set the device to be OMAP3505 here. Actual device
+		 * is identified later based on the features.
+		 */
+		omap_revision = OMAP3505_REV(rev);
+		break;
+	case 0xb891:
+	/* FALLTHROUGH */
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP3630_REV_ES1_0;
+	}
+}
+
+#define OMAP3_SHOW_FEATURE(feat)		\
+	if (omap3_has_ ##feat())		\
+		printk(#feat" ");
+
+void __init omap3_cpuinfo(void)
+{
+	u8 rev = GET_OMAP_REVISION();
+	char cpu_name[16], cpu_rev[16];
+
+	/* OMAP3430 and OMAP3530 are assumed to be same.
+	 *
+	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
+	 * on available features. Upon detection, update the CPU id
+	 * and CPU class bits.
+	 */
+	if (cpu_is_omap3630()) {
+		strcpy(cpu_name, "OMAP3630");
+	} else if (cpu_is_omap3505()) {
+		/*
+		 * AM35xx devices
+		 */
+		if (omap3_has_sgx()) {
+			omap_revision = OMAP3517_REV(rev);
+			strcpy(cpu_name, "AM3517");
+		} else {
+			/* Already set in omap3_check_revision() */
+			strcpy(cpu_name, "AM3505");
+		}
+	} else if (omap3_has_iva() && omap3_has_sgx()) {
+		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
+		strcpy(cpu_name, "OMAP3430/3530");
+	} else if (omap3_has_sgx()) {
+		omap_revision = OMAP3525_REV(rev);
+		strcpy(cpu_name, "OMAP3525");
+	} else if (omap3_has_iva()) {
+		omap_revision = OMAP3515_REV(rev);
+		strcpy(cpu_name, "OMAP3515");
+	} else {
+		omap_revision = OMAP3503_REV(rev);
+		strcpy(cpu_name, "OMAP3503");
 	}
 
-out:
-	pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
+	switch (rev) {
+	case OMAP_REVBITS_00:
+		strcpy(cpu_rev, "1.0");
+		break;
+	case OMAP_REVBITS_10:
+		strcpy(cpu_rev, "2.0");
+		break;
+	case OMAP_REVBITS_20:
+		strcpy(cpu_rev, "2.1");
+		break;
+	case OMAP_REVBITS_30:
+		strcpy(cpu_rev, "3.0");
+		break;
+	case OMAP_REVBITS_40:
+	/* FALLTHROUGH */
+	default:
+		/* Use the latest known revision as default */
+		strcpy(cpu_rev, "3.1");
+	}
+
+	/* Print verbose information */
+	pr_info("%s ES%s (", cpu_name, cpu_rev);
+
+	OMAP3_SHOW_FEATURE(l2cache);
+	OMAP3_SHOW_FEATURE(iva);
+	OMAP3_SHOW_FEATURE(sgx);
+	OMAP3_SHOW_FEATURE(neon);
+	OMAP3_SHOW_FEATURE(isp);
+
+	printk(")\n");
 }
 
 /*
@@ -221,15 +329,18 @@
 	 * At this point we have an idea about the processor revision set
 	 * earlier with omap2_set_globals_tap().
 	 */
-	if (cpu_is_omap24xx())
+	if (cpu_is_omap24xx()) {
 		omap24xx_check_revision();
-	else if (cpu_is_omap34xx())
-		omap34xx_check_revision();
-	else if (cpu_is_omap44xx()) {
+	} else if (cpu_is_omap34xx()) {
+		omap3_check_revision();
+		omap3_check_features();
+		omap3_cpuinfo();
+	} else if (cpu_is_omap44xx()) {
 		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
 		return;
-	} else
+	} else {
 		pr_err("OMAP revision unknown, please fix!\n");
+	}
 
 	/*
 	 * OK, now we know the exact revision. Initialize omap_chip bits
@@ -241,6 +352,8 @@
 	} else if (cpu_is_omap242x()) {
 		/* Currently only supports 2420ES2.1.1 and 2420-all */
 		omap_chip.oc |= CHIP_IS_OMAP2420;
+	} else if (cpu_is_omap3505() || cpu_is_omap3517()) {
+		omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
 	} else if (cpu_is_omap343x()) {
 		omap_chip.oc = CHIP_IS_OMAP3430;
 		if (omap_rev() == OMAP3430_REV_ES1_0)
@@ -252,6 +365,8 @@
 			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
 		else if (omap_rev() == OMAP3430_REV_ES3_1)
 			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+		else if (omap_rev() == OMAP3630_REV_ES1_0)
+			omap_chip.oc |= CHIP_IS_OMAP3630ES1;
 	} else {
 		pr_err("Uninitialized omap_chip, please fix!\n");
 	}
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
new file mode 100644
index 0000000..c93b29e
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -0,0 +1,5 @@
+/*
+ * Defines for zoom boards
+ */
+extern int __init zoom_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);
diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h
new file mode 100644
index 0000000..53b0274
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
new file mode 100644
index 0000000..e9f255d
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -0,0 +1,59 @@
+/* arch/arm/mach-omap2/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+#ifdef  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xfa000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xfa000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00fb0000	@ UART 3
+		add	\rx, \rx, #0x00006000
+#endif
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
new file mode 100644
index 0000000..c7f1720
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <plat/omap44xx.h>
+#endif
+#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
+#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#ifndef CONFIG_ARCH_OMAP4
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP2_VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
+		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+
+		.endm
+#else
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020.  The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt.
+		 * We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr     \tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc   \irqnr, \irqnr
+		cmpne   \irqnr, \tmp
+		cmpcs   \irqnr, \irqnr
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif
+
+		.macro	irq_prio_table
+		.endm
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
new file mode 100644
index 0000000..be4d290
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
new file mode 100644
index 0000000..78edf9d
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h
new file mode 100644
index 0000000..fd78f31
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
new file mode 100644
index 0000000..44dab77
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
new file mode 100644
index 0000000..ca6d32a
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h
new file mode 100644
index 0000000..323675f
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
new file mode 100644
index 0000000..d488721
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
new file mode 100644
index 0000000..de9f8fc
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
new file mode 100644
index 0000000..78e0557b
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
new file mode 100644
index 0000000..9ce9b6e
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 56be87d..59d28b2 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -27,24 +27,24 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
-#include <mach/sram.h>
-#include <mach/sdrc.h>
-#include <mach/gpmc.h>
-#include <mach/serial.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+#include <plat/gpmc.h>
+#include <plat/serial.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
-#include <mach/omap-pm.h>
-#include <mach/powerdomain.h>
+#include <plat/omap-pm.h>
+#include <plat/powerdomain.h>
 #include "powerdomains.h"
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 #include "clockdomains.h"
 #endif
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include "omap_hwmod_2420.h"
 #include "omap_hwmod_2430.h"
 #include "omap_hwmod_34xx.h"
@@ -203,6 +203,24 @@
 		.type		= MT_DEVICE,
 	},
 	{
+		.virtual	= OMAP44XX_EMIF1_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
+		.length		= OMAP44XX_EMIF1_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_EMIF2_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
+		.length		= OMAP44XX_EMIF2_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_DMM_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_DMM_PHYS),
+		.length		= OMAP44XX_DMM_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
 		.virtual	= L4_PER_44XX_VIRT,
 		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
 		.length		= L4_PER_44XX_SIZE,
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 4a0e1cd..6f4b7cc 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/stringify.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 /*
  * omap2 architecture specific register bit definitions
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index b828638..e9bc782 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -25,6 +25,10 @@
 #define INTC_SYSSTATUS		0x0014
 #define INTC_SIR		0x0040
 #define INTC_CONTROL		0x0048
+#define INTC_PROTECTION		0x004C
+#define INTC_IDLE		0x0050
+#define INTC_THRESHOLD		0x0068
+#define INTC_MIR0		0x0084
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
@@ -48,6 +52,18 @@
 	},
 };
 
+/* Structure to save interrupt controller context */
+struct omap3_intc_regs {
+	u32 sysconfig;
+	u32 protection;
+	u32 idle;
+	u32 threshold;
+	u32 ilr[INTCPS_NR_IRQS];
+	u32 mir[INTCPS_NR_MIR_REGS];
+};
+
+static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
+
 /* INTC bank register get/set */
 
 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
@@ -178,12 +194,20 @@
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		unsigned long base;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
-			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+			base = OMAP24XX_IC_BASE;
 		else if (cpu_is_omap34xx())
-			bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
+			base = OMAP34XX_IC_BASE;
+
+		/* Static mapping, never released */
+		bank->base_reg = ioremap(base, SZ_4K);
+		if (!bank->base_reg) {
+			printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
+			continue;
+		}
 
 		omap_irq_bank_init_one(bank);
 
@@ -201,3 +225,53 @@
 	}
 }
 
+#ifdef CONFIG_ARCH_OMAP3
+void omap_intc_save_context(void)
+{
+	int ind = 0, i = 0;
+	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+		struct omap_irq_bank *bank = irq_banks + ind;
+		intc_context[ind].sysconfig =
+			intc_bank_read_reg(bank, INTC_SYSCONFIG);
+		intc_context[ind].protection =
+			intc_bank_read_reg(bank, INTC_PROTECTION);
+		intc_context[ind].idle =
+			intc_bank_read_reg(bank, INTC_IDLE);
+		intc_context[ind].threshold =
+			intc_bank_read_reg(bank, INTC_THRESHOLD);
+		for (i = 0; i < INTCPS_NR_IRQS; i++)
+			intc_context[ind].ilr[i] =
+				intc_bank_read_reg(bank, (0x100 + 0x4*i));
+		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+			intc_context[ind].mir[i] =
+				intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
+				(0x20 * i));
+	}
+}
+
+void omap_intc_restore_context(void)
+{
+	int ind = 0, i = 0;
+
+	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+		struct omap_irq_bank *bank = irq_banks + ind;
+		intc_bank_write_reg(intc_context[ind].sysconfig,
+					bank, INTC_SYSCONFIG);
+		intc_bank_write_reg(intc_context[ind].sysconfig,
+					bank, INTC_SYSCONFIG);
+		intc_bank_write_reg(intc_context[ind].protection,
+					bank, INTC_PROTECTION);
+		intc_bank_write_reg(intc_context[ind].idle,
+					bank, INTC_IDLE);
+		intc_bank_write_reg(intc_context[ind].threshold,
+					bank, INTC_THRESHOLD);
+		for (i = 0; i < INTCPS_NR_IRQS; i++)
+			intc_bank_write_reg(intc_context[ind].ilr[i],
+				bank, (0x100 + 0x4*i));
+		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+			intc_bank_write_reg(intc_context[ind].mir[i],
+				 &irq_banks[0], INTC_MIR0 + (0x20 * i));
+	}
+	/* MIRs are saved and restore with other PRCM registers */
+}
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index ef57b38..281ab63 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -15,9 +15,11 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
+#define DRV_NAME "omap2-mailbox"
+
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_SYSCONFIG		0x010
 #define MAILBOX_SYSSTATUS		0x014
@@ -27,8 +29,12 @@
 #define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
 #define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
 
-#define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
-#define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
+#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 10 * (u))
+
+#define MAILBOX_IRQ_NEWMSG(m)		(1 << (2 * (m)))
+#define MAILBOX_IRQ_NOTFULL(m)		(1 << (2 * (m) + 1))
 
 /* SYSCONFIG: register bit definition */
 #define AUTOIDLE	(1 << 0)
@@ -39,7 +45,11 @@
 #define RESETDONE	(1 << 0)
 
 #define MBOX_REG_SIZE			0x120
+
+#define OMAP4_MBOX_REG_SIZE		0x130
+
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
+#define OMAP4_MBOX_NR_REGS		(OMAP4_MBOX_REG_SIZE / sizeof(u32))
 
 static void __iomem *mbox_base;
 
@@ -56,7 +66,8 @@
 	unsigned long irqstatus;
 	u32 newmsg_bit;
 	u32 notfull_bit;
-	u32 ctx[MBOX_NR_REGS];
+	u32 ctx[OMAP4_MBOX_NR_REGS];
+	unsigned long irqdisable;
 };
 
 static struct clk *mbox_ick_handle;
@@ -82,8 +93,9 @@
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		pr_err("Can't get mailboxes_ick\n");
-		return -ENODEV;
+		printk(KERN_ERR "Could not get mailboxes_ick: %d\n",
+			PTR_ERR(mbox_ick_handle));
+		return PTR_ERR(mbox_ick_handle);
 	}
 	clk_enable(mbox_ick_handle);
 
@@ -115,6 +127,7 @@
 {
 	clk_disable(mbox_ick_handle);
 	clk_put(mbox_ick_handle);
+	mbox_ick_handle = NULL;
 }
 
 /* Mailbox FIFO handle functions */
@@ -143,7 +156,7 @@
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
-	return (mbox_read_reg(fifo->fifo_stat));
+	return mbox_read_reg(fifo->fifo_stat);
 }
 
 /* Mailbox IRQ handle functions */
@@ -163,10 +176,9 @@
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
 	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
-	l = mbox_read_reg(p->irqenable);
+	l = mbox_read_reg(p->irqdisable);
 	l &= ~bit;
-	mbox_write_reg(l, p->irqenable);
+	mbox_write_reg(l, p->irqdisable);
 }
 
 static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
@@ -189,15 +201,19 @@
 	u32 enable = mbox_read_reg(p->irqenable);
 	u32 status = mbox_read_reg(p->irqstatus);
 
-	return (enable & status & bit);
+	return (int)(enable & status & bit);
 }
 
 static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
 {
 	int i;
 	struct omap_mbox2_priv *p = mbox->priv;
-
-	for (i = 0; i < MBOX_NR_REGS; i++) {
+	int nr_regs;
+	if (cpu_is_omap44xx())
+		nr_regs = OMAP4_MBOX_NR_REGS;
+	else
+		nr_regs = MBOX_NR_REGS;
+	for (i = 0; i < nr_regs; i++) {
 		p->ctx[i] = mbox_read_reg(i * sizeof(u32));
 
 		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
@@ -209,8 +225,12 @@
 {
 	int i;
 	struct omap_mbox2_priv *p = mbox->priv;
-
-	for (i = 0; i < MBOX_NR_REGS; i++) {
+	int nr_regs;
+	if (cpu_is_omap44xx())
+		nr_regs = OMAP4_MBOX_NR_REGS;
+	else
+		nr_regs = MBOX_NR_REGS;
+	for (i = 0; i < nr_regs; i++) {
 		mbox_write_reg(p->ctx[i], i * sizeof(u32));
 
 		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
@@ -242,7 +262,6 @@
  */
 
 /* FIXME: the following structs should be filled automatically by the user id */
-
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -257,8 +276,36 @@
 	.irqstatus	= MAILBOX_IRQSTATUS(0),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
+	.irqdisable	= MAILBOX_IRQENABLE(0),
 };
 
+
+
+/* OMAP4 specific data structure. Use the cpu_is_omap4xxx()
+to use this*/
+static struct omap_mbox2_priv omap2_mbox_1_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(0),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(1),
+		.msg_stat	= MAILBOX_MSGSTATUS(1),
+	},
+	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
+	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
+	.irqdisable	= OMAP4_MAILBOX_IRQENABLE_CLR(0),
+};
+
+struct omap_mbox mbox_1_info = {
+	.name	= "mailbox-1",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_1_priv,
+};
+EXPORT_SYMBOL(mbox_1_info);
+
 struct omap_mbox mbox_dsp_info = {
 	.name	= "dsp",
 	.ops	= &omap2_mbox_ops,
@@ -266,6 +313,30 @@
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
+static struct omap_mbox2_priv omap2_mbox_2_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(3),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(3),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(2),
+		.msg_stat	= MAILBOX_MSGSTATUS(2),
+	},
+	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
+	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(3),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(2),
+	.irqdisable     = OMAP4_MAILBOX_IRQENABLE_CLR(0),
+};
+
+struct omap_mbox mbox_2_info = {
+	.name	= "mailbox-2",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_2_priv,
+};
+EXPORT_SYMBOL(mbox_2_info);
+
+
 #if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {
@@ -280,6 +351,7 @@
 	.irqstatus	= MAILBOX_IRQSTATUS(3),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
+	.irqdisable	= MAILBOX_IRQENABLE(3),
 };
 
 static struct omap_mbox mbox_iva_info = {
@@ -305,17 +377,31 @@
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (unlikely(!res)) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
+		ret = -ENODEV;
 		goto err_dsp;
 	}
-	mbox_dsp_info.irq = ret;
-
-	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	if (cpu_is_omap44xx()) {
+		mbox_1_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_1_info);
+	} else {
+		mbox_dsp_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	}
 	if (ret)
 		goto err_dsp;
 
+	if (cpu_is_omap44xx()) {
+		mbox_2_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_2_info);
+		if (ret) {
+			omap_mbox_unregister(&mbox_1_info);
+			goto err_dsp;
+		}
+	}
 #if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 	if (cpu_is_omap2420()) {
 		/* IVA IRQ */
@@ -335,6 +421,7 @@
 
 err_iva1:
 	omap_mbox_unregister(&mbox_dsp_info);
+
 err_dsp:
 	iounmap(mbox_base);
 	return ret;
@@ -345,7 +432,12 @@
 #if defined(CONFIG_ARCH_OMAP2420)
 	omap_mbox_unregister(&mbox_iva_info);
 #endif
-	omap_mbox_unregister(&mbox_dsp_info);
+
+	if (cpu_is_omap44xx()) {
+		omap_mbox_unregister(&mbox_2_info);
+		omap_mbox_unregister(&mbox_1_info);
+	} else
+		omap_mbox_unregister(&mbox_dsp_info);
 	iounmap(mbox_base);
 	return 0;
 }
@@ -354,7 +446,7 @@
 	.probe = omap2_mbox_probe,
 	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = "omap2-mailbox",
+		.name = DRV_NAME,
 	},
 };
 
@@ -372,6 +464,6 @@
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
 MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-MODULE_ALIAS("platform:omap2-mailbox");
+MODULE_ALIAS("platform:"DRV_NAME);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a846aa1..baa4517 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -18,10 +18,10 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
 
 static void omap2_mcbsp2_mux_setup(void)
 {
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index c9c59a2..0c3c72d 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -20,9 +20,9 @@
 #include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
-#include <mach/control.h>
-#include <mach/mmc.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/board.h>
 
 #include "mmc-twl4030.h"
 
@@ -213,7 +213,7 @@
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-	u32 reg;
+	u32 reg, prog_io;
 	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[0];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -245,7 +245,14 @@
 		}
 
 		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= OMAP2_PBIASSPEEDCTRL0;
+		if (cpu_is_omap3630()) {
+			/* Set MMC I/O to 52Mhz */
+			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+		} else {
+			reg |= OMAP2_PBIASSPEEDCTRL0;
+		}
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
@@ -489,6 +496,12 @@
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
 			mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
+
+			/* Omap3630 HSMMC1 supports only 4-bit */
+			if (cpu_is_omap3630() && c->wires > 4) {
+				c->wires = 4;
+				mmc->slots[0].wires = c->wires;
+			}
 			break;
 		case 2:
 			if (c->ext_clock)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index b5fac32..c18a94e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -30,8 +30,8 @@
 
 #include <asm/system.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -532,6 +532,14 @@
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
 		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
 
 /* MMC3 */
 MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
@@ -551,6 +559,13 @@
 MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
 		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
 		OMAP34XX_MUX_MODE0)
+/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
+MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
+	OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
+	OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
+	OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 48ee295..4890bcf 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -24,13 +24,14 @@
 #include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
+#include <plat/common.h>
 
 /* Registers used for communicating startup information */
-#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
-#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+static void __iomem *omap4_auxcoreboot_reg0;
+static void __iomem *omap4_auxcoreboot_reg1;
 
 /* SCU base address */
-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+static void __iomem *scu_base;
 
 /*
  * Use SCU config register to count number of cores
@@ -53,8 +54,7 @@
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-
-	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, gic_cpu_base_addr);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -79,7 +79,7 @@
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	__raw_writel(cpu, omap4_auxcoreboot_reg1);
 	smp_wmb();
 
 	timeout = jiffies + (1 * HZ);
@@ -104,7 +104,7 @@
 	 * A barrier is added to ensure that write buffer is drained
 	 */
 	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
-					OMAP4_AUXCOREBOOT_REG0);
+					omap4_auxcoreboot_reg0);
 	smp_wmb();
 
 	/*
@@ -120,7 +120,13 @@
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	unsigned int i, ncores;
+
+	/* Never released */
+	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+	BUG_ON(!scu_base);
+
+	ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
@@ -130,6 +136,7 @@
 {
 	unsigned int ncores = get_core_count();
 	unsigned int cpu = smp_processor_id();
+	void __iomem *omap4_wkupgen_base;
 	int i;
 
 	/* sanity check */
@@ -161,6 +168,12 @@
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
+	/* Never released */
+	omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K);
+	BUG_ON(!omap4_wkupgen_base);
+	omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800;
+	omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804;
+
 	if (max_cpus > 1) {
 		/*
 		 * Enable the local timer or broadcast device for the
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
index 194189c..fbbcb5c 100644
--- a/arch/arm/mach-omap2/omap3-iommu.c
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -12,49 +12,52 @@
 
 #include <linux/platform_device.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
-#define OMAP3_MMU1_BASE	0x480bd400
-#define OMAP3_MMU2_BASE	0x5d000000
-#define OMAP3_MMU1_IRQ	24
-#define OMAP3_MMU2_IRQ	28
-
-
-static unsigned long iommu_base[] __initdata = {
-	OMAP3_MMU1_BASE,
-	OMAP3_MMU2_BASE,
+struct iommu_device {
+	resource_size_t base;
+	int irq;
+	struct iommu_platform_data pdata;
+	struct resource res[2];
 };
 
-static int iommu_irq[] __initdata = {
-	OMAP3_MMU1_IRQ,
-	OMAP3_MMU2_IRQ,
-};
-
-static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+static struct iommu_device devices[] = {
 	{
-		.name = "isp",
-		.nr_tlb_entries = 8,
-		.clk_name = "cam_ick",
+		.base = 0x480bd400,
+		.irq = 24,
+		.pdata = {
+			.name = "isp",
+			.nr_tlb_entries = 8,
+			.clk_name = "cam_ick",
+		},
 	},
 #if defined(CONFIG_MPU_BRIDGE_IOMMU)
 	{
-		.name = "iva2",
-		.nr_tlb_entries = 32,
-		.clk_name = "iva2_ck",
+		.base = 0x5d000000,
+		.irq = 28,
+		.pdata = {
+			.name = "iva2",
+			.nr_tlb_entries = 32,
+			.clk_name = "iva2_ck",
+		},
 	},
 #endif
 };
-#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+#define NR_IOMMU_DEVICES ARRAY_SIZE(devices)
 
 static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
 
 static int __init omap3_iommu_init(void)
 {
 	int i, err;
+	struct resource res[] = {
+		{ .flags = IORESOURCE_MEM },
+		{ .flags = IORESOURCE_IRQ },
+	};
 
 	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
 		struct platform_device *pdev;
-		struct resource res[2];
+		const struct iommu_device *d = &devices[i];
 
 		pdev = platform_device_alloc("omap-iommu", i);
 		if (!pdev) {
@@ -62,19 +65,16 @@
 			goto err_out;
 		}
 
-		memset(res, 0,  sizeof(res));
-		res[0].start = iommu_base[i];
-		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
-		res[0].flags = IORESOURCE_MEM;
-		res[1].start = res[1].end = iommu_irq[i];
-		res[1].flags = IORESOURCE_IRQ;
+		res[0].start = d->base;
+		res[0].end = d->base + MMU_REG_SIZE - 1;
+		res[1].start = res[1].end = d->irq;
 
 		err = platform_device_add_resources(pdev, res,
 						    ARRAY_SIZE(res));
 		if (err)
 			goto err_out;
-		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
-					       sizeof(omap3_iommu_pdata[0]));
+		err = platform_device_add_data(pdev, &d->pdata,
+					       sizeof(d->pdata));
 		if (err)
 			goto err_out;
 		err = platform_device_add(pdev);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d2e0f1c..633b216 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -45,11 +45,11 @@
 #include <linux/mutex.h>
 #include <linux/bootmem.h>
 
-#include <mach/cpu.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/omap_hwmod.h>
+#include <plat/cpu.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/omap_hwmod.h>
 
 #include "cm.h"
 
@@ -496,6 +496,7 @@
 	struct omap_hwmod_addr_space *mem;
 	int i;
 	int found = 0;
+	void __iomem *va_start;
 
 	if (!oh || oh->slaves_cnt == 0)
 		return NULL;
@@ -509,16 +510,20 @@
 		}
 	}
 
-	/* XXX use ioremap() instead? */
-
-	if (found)
+	if (found) {
+		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
+		if (!va_start) {
+			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+			return NULL;
+		}
 		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
-			 oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
-	else
+			 oh->name, va_start);
+	} else {
 		pr_debug("omap_hwmod: %s: no MPU register target found\n",
 			 oh->name);
+	}
 
-	return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
+	return (found) ? va_start : NULL;
 }
 
 /**
@@ -1148,6 +1153,7 @@
 	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
 
 	mutex_lock(&omap_hwmod_mutex);
+	iounmap(oh->_rt_va);
 	list_del(&oh->node);
 	mutex_unlock(&omap_hwmod_mutex);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
index 767e496..a9ca1b9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2420.h
@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2420
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
index a412be6..59a208b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2430.h
@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2430
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
index 1e069f8..b6076b9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_34xx.h
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -14,10 +14,10 @@
 
 #ifdef CONFIG_ARCH_OMAP34XX
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-34xx.h"
 
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 2fc4d6a..8baa30d 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -26,10 +26,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <mach/clock.h>
-#include <mach/board.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/clock.h>
+#include <plat/board.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -51,7 +51,8 @@
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
+	regs[reg_count++].val = \
+			 __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
 static int __init pm_dbg_init(void);
 
@@ -526,6 +527,29 @@
 	return 0;
 }
 
+static int option_get(void *data, u64 *val)
+{
+	u32 *option = data;
+
+	*val = *option;
+
+	return 0;
+}
+
+static int option_set(void *data, u64 val)
+{
+	u32 *option = data;
+
+	*option = val;
+
+	if (option == &enable_off_mode)
+		omap3_pm_off_mode_enable(val);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
+
 static int __init pm_dbg_init(void)
 {
 	int i;
@@ -568,6 +592,12 @@
 
 		}
 
+	(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+				   &enable_off_mode, &pm_dbg_option_fops);
+	(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+				   &sleep_while_idle, &pm_dbg_option_fops);
+	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
+				   &wakeup_timer_seconds, &pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8400f57..0bf345d 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,11 +11,24 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
+
+extern u32 enable_off_mode;
+extern u32 sleep_while_idle;
+
+extern void *omap3_secure_ram_storage;
+extern void omap3_pm_off_mode_enable(int);
+extern void omap_sram_idle(void);
+extern int omap3_can_sleep(void);
+extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap3_idle_init(void);
 
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
+extern u32 wakeup_timer_seconds;
+extern struct omap_dm_timer *gptimer_wakeup;
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
@@ -36,6 +49,7 @@
 					void __iomem *sdrc_power);
 extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
 extern void save_secure_ram_context(u32 *addr);
+extern void omap3_save_scratchpad_contents(void);
 
 extern unsigned int omap24xx_idle_loop_suspend_sz;
 extern unsigned int omap34xx_suspend_sz;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bff5c4e..cba05b9 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -36,12 +36,12 @@
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/board.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/board.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -50,8 +50,8 @@
 #include "sdrc.h"
 #include "pm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 8946319..81ed252 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -5,6 +5,9 @@
  * Tony Lindgren <tony@atomide.com>
  * Jouni Hogander
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
  * Copyright (C) 2005 Texas Instruments, Inc.
  * Richard Woodruff <r-woodruff2@ti.com>
  *
@@ -22,12 +25,20 @@
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 
-#include <mach/sram.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/control.h>
-#include <mach/serial.h>
+#include <plat/sram.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
+#include <plat/sdrc.h>
+#include <plat/prcm.h>
+#include <plat/gpmc.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
+
+#include <asm/tlbflush.h>
 
 #include "cm.h"
 #include "cm-regbits-34xx.h"
@@ -35,6 +46,16 @@
 
 #include "prm.h"
 #include "pm.h"
+#include "sdrc.h"
+
+/* Scratchpad offsets */
+#define OMAP343X_TABLE_ADDRESS_OFFSET	   0x31
+#define OMAP343X_TABLE_VALUE_OFFSET	   0x30
+#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
+
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -49,7 +70,112 @@
 
 static void (*_omap_sram_idle)(u32 *addr, int save_state);
 
-static struct powerdomain *mpu_pwrdm;
+static int (*_omap_save_secure_sram)(u32 *addr);
+
+static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
+static struct powerdomain *core_pwrdm, *per_pwrdm;
+static struct powerdomain *cam_pwrdm;
+
+static inline void omap3_per_save_context(void)
+{
+	omap_gpio_save_context();
+}
+
+static inline void omap3_per_restore_context(void)
+{
+	omap_gpio_restore_context();
+}
+
+static void omap3_enable_io_chain(void)
+{
+	int timeout = 0;
+
+	if (omap_rev() >= OMAP3430_REV_ES3_1) {
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		/* Do a readback to assure write has been done */
+		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			 OMAP3430_ST_IO_CHAIN)) {
+			timeout++;
+			if (timeout > 1000) {
+				printk(KERN_ERR "Wake up daisy chain "
+				       "activation failed.\n");
+				return;
+			}
+			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN,
+					     WKUP_MOD, PM_WKST);
+		}
+	}
+}
+
+static void omap3_disable_io_chain(void)
+{
+	if (omap_rev() >= OMAP3430_REV_ES3_1)
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+}
+
+static void omap3_core_save_context(void)
+{
+	u32 control_padconf_off;
+
+	/* Save the padconf registers */
+	control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
+	control_padconf_off |= START_PADCONF_SAVE;
+	omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
+	/* wait for the save to complete */
+	while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+			& PADCONF_SAVE_DONE)
+		;
+	/* Save the Interrupt controller context */
+	omap_intc_save_context();
+	/* Save the GPMC context */
+	omap3_gpmc_save_context();
+	/* Save the system control module context, padconf already save above*/
+	omap3_control_save_context();
+	omap_dma_global_context_save();
+}
+
+static void omap3_core_restore_context(void)
+{
+	/* Restore the control module context, padconf restored by h/w */
+	omap3_control_restore_context();
+	/* Restore the GPMC context */
+	omap3_gpmc_restore_context();
+	/* Restore the interrupt controller context */
+	omap_intc_restore_context();
+	omap_dma_global_context_restore();
+}
+
+/*
+ * FIXME: This function should be called before entering off-mode after
+ * OMAP3 secure services have been accessed. Currently it is only called
+ * once during boot sequence, but this works as we are not using secure
+ * services.
+ */
+static void omap3_save_secure_ram_context(u32 target_mpu_state)
+{
+	u32 ret;
+
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		/*
+		 * MPU next state must be set to POWER_ON temporarily,
+		 * otherwise the WFI executed inside the ROM code
+		 * will hang the system.
+		 */
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+		ret = _omap_save_secure_sram((u32 *)
+				__pa(omap3_secure_ram_storage));
+		pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+		/* Following is for error tracking, it should not happen */
+		if (ret) {
+			printk(KERN_ERR "save_secure_sram() returns %08x\n",
+				ret);
+			while (1)
+				;
+		}
+	}
+}
 
 /*
  * PRCM Interrupt Handler Helper Function
@@ -161,7 +287,36 @@
 	return IRQ_HANDLED;
 }
 
-static void omap_sram_idle(void)
+static void restore_control_register(u32 val)
+{
+	__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val));
+}
+
+/* Function to restore the table entry that was modified for enabling MMU */
+static void restore_table_entry(void)
+{
+	u32 *scratchpad_address;
+	u32 previous_value, control_reg_value;
+	u32 *address;
+
+	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+
+	/* Get address of entry that was modified */
+	address = (u32 *)__raw_readl(scratchpad_address +
+				     OMAP343X_TABLE_ADDRESS_OFFSET);
+	/* Get the previous value which needs to be restored */
+	previous_value = __raw_readl(scratchpad_address +
+				     OMAP343X_TABLE_VALUE_OFFSET);
+	address = __va(address);
+	*address = previous_value;
+	flush_tlb_all();
+	control_reg_value = __raw_readl(scratchpad_address
+					+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
+	/* This will enable caches and prediction */
+	restore_control_register(control_reg_value);
+}
+
+void omap_sram_idle(void)
 {
 	/* Variable to tell what needs to be saved and restored
 	 * in omap_sram_idle*/
@@ -169,17 +324,32 @@
 	/* save_state = 1 => Only L1 and logic lost */
 	/* save_state = 2 => Only L2 lost */
 	/* save_state = 3 => L1, L2 and logic lost */
-	int save_state = 0, mpu_next_state;
+	int save_state = 0;
+	int mpu_next_state = PWRDM_POWER_ON;
+	int per_next_state = PWRDM_POWER_ON;
+	int core_next_state = PWRDM_POWER_ON;
+	int core_prev_state, per_prev_state;
+	u32 sdrc_pwr = 0;
+	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
 
+	pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
+	pwrdm_clear_all_prev_pwrst(neon_pwrdm);
+	pwrdm_clear_all_prev_pwrst(core_pwrdm);
+	pwrdm_clear_all_prev_pwrst(per_pwrdm);
+
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 	switch (mpu_next_state) {
+	case PWRDM_POWER_ON:
 	case PWRDM_POWER_RET:
 		/* No need to save context */
 		save_state = 0;
 		break;
+	case PWRDM_POWER_OFF:
+		save_state = 3;
+		break;
 	default:
 		/* Invalid state */
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
@@ -187,68 +357,115 @@
 	}
 	pwrdm_pre_transition();
 
-	omap2_gpio_prepare_for_retention();
-	omap_uart_prepare_idle(0);
-	omap_uart_prepare_idle(1);
-	omap_uart_prepare_idle(2);
+	/* NEON control */
+	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
+		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
 
-	_omap_sram_idle(NULL, save_state);
+	/* PER */
+	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
+	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON) {
+		omap_uart_prepare_idle(2);
+		omap2_gpio_prepare_for_retention();
+		if (per_next_state == PWRDM_POWER_OFF) {
+			if (core_next_state == PWRDM_POWER_ON) {
+				per_next_state = PWRDM_POWER_RET;
+				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
+				per_state_modified = 1;
+			} else
+				omap3_per_save_context();
+		}
+	}
+
+	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
+		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+
+	/* CORE */
+	if (core_next_state < PWRDM_POWER_ON) {
+		omap_uart_prepare_idle(0);
+		omap_uart_prepare_idle(1);
+		if (core_next_state == PWRDM_POWER_OFF) {
+			omap3_core_save_context();
+			omap3_prcm_save_context();
+		}
+		/* Enable IO-PAD and IO-CHAIN wakeups */
+		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_enable_io_chain();
+	}
+
+	/*
+	* On EMU/HS devices ROM code restores a SRDC value
+	* from scratchpad which has automatic self refresh on timeout
+	* of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+	* Hence store/restore the SDRC_POWER register here.
+	*/
+	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	    core_next_state == PWRDM_POWER_OFF)
+		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
+
+	/*
+	 * omap3_arm_context is the location where ARM registers
+	 * get saved. The restore path then reads from this
+	 * location and restores them back.
+	 */
+	_omap_sram_idle(omap3_arm_context, save_state);
 	cpu_init();
 
-	omap_uart_resume_idle(2);
-	omap_uart_resume_idle(1);
-	omap_uart_resume_idle(0);
-	omap2_gpio_resume_after_retention();
+	/* Restore normal SDRC POWER settings */
+	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	    core_next_state == PWRDM_POWER_OFF)
+		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
+
+	/* Restore table entry modified during MMU restoration */
+	if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
+		restore_table_entry();
+
+	/* CORE */
+	if (core_next_state < PWRDM_POWER_ON) {
+		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
+		if (core_prev_state == PWRDM_POWER_OFF) {
+			omap3_core_restore_context();
+			omap3_prcm_restore_context();
+			omap3_sram_restore_context();
+			omap2_sms_restore_context();
+		}
+		omap_uart_resume_idle(0);
+		omap_uart_resume_idle(1);
+		if (core_next_state == PWRDM_POWER_OFF)
+			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
+					       OMAP3430_GR_MOD,
+					       OMAP3_PRM_VOLTCTRL_OFFSET);
+	}
+
+	/* PER */
+	if (per_next_state < PWRDM_POWER_ON) {
+		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+		if (per_prev_state == PWRDM_POWER_OFF)
+			omap3_per_restore_context();
+		omap2_gpio_resume_after_retention();
+		omap_uart_resume_idle(2);
+		if (per_state_modified)
+			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
+	}
+
+	/* Disable IO-PAD and IO-CHAIN wakeup */
+	if (core_next_state < PWRDM_POWER_ON) {
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_disable_io_chain();
+	}
 
 	pwrdm_post_transition();
 
+	omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
-/*
- * Check if functional clocks are enabled before entering
- * sleep. This function could be behind CONFIG_PM_DEBUG
- * when all drivers are configuring their sysconfig registers
- * properly and using their clocks properly.
- */
-static int omap3_fclks_active(void)
+int omap3_can_sleep(void)
 {
-	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
-		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
-
-	fck_core1 = cm_read_mod_reg(CORE_MOD,
-				    CM_FCLKEN1);
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		fck_core3 = cm_read_mod_reg(CORE_MOD,
-					    OMAP3430ES2_CM_FCLKEN3);
-		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-					  CM_FCLKEN);
-		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					      CM_FCLKEN);
-	} else
-		fck_sgx = cm_read_mod_reg(GFX_MOD,
-					  OMAP3430ES2_CM_FCLKEN3);
-	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
-				  CM_FCLKEN);
-	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
-				  CM_FCLKEN);
-	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
-				  CM_FCLKEN);
-
-	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
-	fck_per &= ~OMAP3430_EN_UART3;
-
-	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
-	    fck_cam | fck_per | fck_usbhost)
-		return 1;
-	return 0;
-}
-
-static int omap3_can_sleep(void)
-{
-	if (!omap_uart_can_sleep())
+	if (!sleep_while_idle)
 		return 0;
-	if (omap3_fclks_active())
+	if (!omap_uart_can_sleep())
 		return 0;
 	return 1;
 }
@@ -256,7 +473,7 @@
 /* This sets pwrdm state (other than mpu & core. Currently only ON &
  * RET are supported. Function is assuming that clkdm doesn't have
  * hw_sup mode enabled. */
-static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 {
 	u32 cur_state;
 	int sleep_switch = 0;
@@ -306,7 +523,7 @@
 	if (!omap3_can_sleep())
 		goto out;
 
-	if (omap_irq_pending())
+	if (omap_irq_pending() || need_resched())
 		goto out;
 
 	omap_sram_idle();
@@ -319,6 +536,22 @@
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
+static void omap2_pm_wakeup_on_timer(u32 seconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
+		seconds, cycles, tick_rate);
+}
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -330,6 +563,9 @@
 	struct power_state *pwrst;
 	int state, ret = 0;
 
+	if (wakeup_timer_seconds)
+		omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
@@ -690,6 +926,22 @@
 	omap3_d2d_idle();
 }
 
+void omap3_pm_off_mode_enable(int enable)
+{
+	struct power_state *pwrst;
+	u32 state;
+
+	if (enable)
+		state = PWRDM_POWER_OFF;
+	else
+		state = PWRDM_POWER_RET;
+
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		pwrst->next_state = state;
+		set_pwrdm_state(pwrst->pwrdm, state);
+	}
+}
+
 int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
 {
 	struct power_state *pwrst;
@@ -749,6 +1001,15 @@
 	return 0;
 }
 
+void omap_push_sram_idle(void)
+{
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					omap34xx_cpu_suspend_sz);
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
+				save_secure_ram_context_sz);
+}
+
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
@@ -786,15 +1047,47 @@
 		goto err2;
 	}
 
-	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
-					 omap34xx_cpu_suspend_sz);
+	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
+	per_pwrdm = pwrdm_lookup("per_pwrdm");
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
+	omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
+	omap3_idle_init();
 
+	pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
+	/*
+	 * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
+	 * IO-pad wakeup.  Otherwise it will unnecessarily waste power
+	 * waking up PER with every CORE wakeup - see
+	 * http://marc.info/?l=linux-omap&m=121852150710062&w=2
+	*/
+	pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
+
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		omap3_secure_ram_storage =
+			kmalloc(0x803F, GFP_KERNEL);
+		if (!omap3_secure_ram_storage)
+			printk(KERN_ERR "Memory allocation failed when"
+					"allocating for secure sram context\n");
+
+		local_irq_disable();
+		local_fiq_disable();
+
+		omap_dma_global_context_save();
+		omap3_save_secure_ram_context(PWRDM_POWER_ON);
+		omap_dma_global_context_restore();
+
+		local_irq_enable();
+		local_fiq_enable();
+	}
+
+	omap3_save_scratchpad_contents();
 err1:
 	return ret;
 err2:
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index f00289a..b6990e3 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -31,9 +31,9 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
-#include <mach/cpu.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "pm.h"
 
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 691470e..057b2e3 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -63,7 +63,7 @@
  * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
index 9f08dc3..bd249a4 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 4dcf94b..fd09b08 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
@@ -338,7 +338,13 @@
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
-	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
+	/*
+	 * REVISIT: Enabling usb host save and restore mechanism seems to
+	 * leave the usb host domain permanently in ACTIVE mode after
+	 * changing the usb host power domain state from OFF to active once.
+	 * Disabling for now.
+	 */
+	/*.flags	  = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index ced555a..029d376 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -7,6 +7,9 @@
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
  * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,10 +22,13 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#include <mach/common.h>
-#include <mach/prcm.h>
+#include <plat/common.h>
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+#include <plat/control.h>
 
 #include "clock.h"
+#include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 
@@ -31,6 +37,89 @@
 
 #define MAX_MODULE_ENABLE_WAIT		100000
 
+struct omap3_prcm_regs {
+	u32 control_padconf_sys_nirq;
+	u32 iva2_cm_clksel1;
+	u32 iva2_cm_clksel2;
+	u32 cm_sysconfig;
+	u32 sgx_cm_clksel;
+	u32 wkup_cm_clksel;
+	u32 dss_cm_clksel;
+	u32 cam_cm_clksel;
+	u32 per_cm_clksel;
+	u32 emu_cm_clksel;
+	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle2;
+	u32 pll_cm_clksel4;
+	u32 pll_cm_clksel5;
+	u32 pll_cm_clken;
+	u32 pll_cm_clken2;
+	u32 cm_polctrl;
+	u32 iva2_cm_fclken;
+	u32 iva2_cm_clken_pll;
+	u32 core_cm_fclken1;
+	u32 core_cm_fclken3;
+	u32 sgx_cm_fclken;
+	u32 wkup_cm_fclken;
+	u32 dss_cm_fclken;
+	u32 cam_cm_fclken;
+	u32 per_cm_fclken;
+	u32 usbhost_cm_fclken;
+	u32 core_cm_iclken1;
+	u32 core_cm_iclken2;
+	u32 core_cm_iclken3;
+	u32 sgx_cm_iclken;
+	u32 wkup_cm_iclken;
+	u32 dss_cm_iclken;
+	u32 cam_cm_iclken;
+	u32 per_cm_iclken;
+	u32 usbhost_cm_iclken;
+	u32 iva2_cm_autiidle2;
+	u32 mpu_cm_autoidle2;
+	u32 pll_cm_autoidle;
+	u32 iva2_cm_clkstctrl;
+	u32 mpu_cm_clkstctrl;
+	u32 core_cm_clkstctrl;
+	u32 sgx_cm_clkstctrl;
+	u32 dss_cm_clkstctrl;
+	u32 cam_cm_clkstctrl;
+	u32 per_cm_clkstctrl;
+	u32 neon_cm_clkstctrl;
+	u32 usbhost_cm_clkstctrl;
+	u32 core_cm_autoidle1;
+	u32 core_cm_autoidle2;
+	u32 core_cm_autoidle3;
+	u32 wkup_cm_autoidle;
+	u32 dss_cm_autoidle;
+	u32 cam_cm_autoidle;
+	u32 per_cm_autoidle;
+	u32 usbhost_cm_autoidle;
+	u32 sgx_cm_sleepdep;
+	u32 dss_cm_sleepdep;
+	u32 cam_cm_sleepdep;
+	u32 per_cm_sleepdep;
+	u32 usbhost_cm_sleepdep;
+	u32 cm_clkout_ctrl;
+	u32 prm_clkout_ctrl;
+	u32 sgx_pm_wkdep;
+	u32 dss_pm_wkdep;
+	u32 cam_pm_wkdep;
+	u32 per_pm_wkdep;
+	u32 neon_pm_wkdep;
+	u32 usbhost_pm_wkdep;
+	u32 core_pm_mpugrpsel1;
+	u32 iva2_pm_ivagrpsel1;
+	u32 core_pm_mpugrpsel3;
+	u32 core_pm_ivagrpsel3;
+	u32 wkup_pm_mpugrpsel;
+	u32 wkup_pm_ivagrpsel;
+	u32 per_pm_mpugrpsel;
+	u32 per_pm_ivagrpsel;
+	u32 wkup_pm_wken;
+};
+
+struct omap3_prcm_regs prcm_context;
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
@@ -46,9 +135,18 @@
 
 	if (cpu_is_omap24xx())
 		prcm_offs = WKUP_MOD;
-	else if (cpu_is_omap34xx())
+	else if (cpu_is_omap34xx()) {
+		u32 l;
+
 		prcm_offs = OMAP3430_GR_MOD;
-	else
+		l = ('B' << 24) | ('M' << 16) | mode;
+		/* Reserve the first word in scratchpad for communicating
+		 * with the boot ROM. A pointer to a data structure
+		 * describing the boot process can be stored there,
+		 * cf. OMAP34xx TRM, Initialization / Software Booting
+		 * Configuration. */
+		omap_writel(l, OMAP343X_SCRATCHPAD + 4);
+	} else
 		WARN_ON(1);
 
 	prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
@@ -168,3 +266,308 @@
 	prm_base = omap2_globals->prm;
 	cm_base = omap2_globals->cm;
 }
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_prcm_save_context(void)
+{
+	prcm_context.control_padconf_sys_nirq =
+			 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+	prcm_context.iva2_cm_clksel1 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
+	prcm_context.iva2_cm_clksel2 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
+	prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	prcm_context.sgx_cm_clksel =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
+	prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	prcm_context.dss_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
+	prcm_context.cam_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
+	prcm_context.per_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
+	prcm_context.emu_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
+	prcm_context.emu_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL);
+	prcm_context.pll_cm_autoidle2 =
+			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
+	prcm_context.pll_cm_clksel4 =
+			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
+	prcm_context.pll_cm_clksel5 =
+			 cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
+	prcm_context.pll_cm_clken =
+			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	prcm_context.pll_cm_clken2 =
+			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
+	prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	prcm_context.iva2_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
+	prcm_context.iva2_cm_clken_pll = cm_read_mod_reg(OMAP3430_IVA2_MOD,
+			OMAP3430_CM_CLKEN_PLL);
+	prcm_context.core_cm_fclken1 =
+			 cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	prcm_context.core_cm_fclken3 =
+			 cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	prcm_context.sgx_cm_fclken =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
+	prcm_context.wkup_cm_fclken =
+			 cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+	prcm_context.dss_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
+	prcm_context.cam_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
+	prcm_context.per_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+	prcm_context.usbhost_cm_fclken =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	prcm_context.core_cm_iclken1 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+	prcm_context.core_cm_iclken2 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
+	prcm_context.core_cm_iclken3 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+	prcm_context.sgx_cm_iclken =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
+	prcm_context.wkup_cm_iclken =
+			 cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+	prcm_context.dss_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
+	prcm_context.cam_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
+	prcm_context.per_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+	prcm_context.usbhost_cm_iclken =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	prcm_context.iva2_cm_autiidle2 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	prcm_context.mpu_cm_autoidle2 =
+			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
+	prcm_context.pll_cm_autoidle =
+			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
+	prcm_context.iva2_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+	prcm_context.mpu_cm_clkstctrl =
+			 cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL);
+	prcm_context.core_cm_clkstctrl =
+			 cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL);
+	prcm_context.sgx_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL);
+	prcm_context.dss_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL);
+	prcm_context.cam_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL);
+	prcm_context.per_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL);
+	prcm_context.neon_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL);
+	prcm_context.usbhost_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+	prcm_context.core_cm_autoidle1 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
+	prcm_context.core_cm_autoidle2 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
+	prcm_context.core_cm_autoidle3 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
+	prcm_context.wkup_cm_autoidle =
+			 cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
+	prcm_context.dss_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
+	prcm_context.cam_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
+	prcm_context.per_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	prcm_context.usbhost_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	prcm_context.sgx_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.dss_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.cam_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.per_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.usbhost_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.cm_clkout_ctrl = cm_read_mod_reg(OMAP3430_CCR_MOD,
+		 OMAP3_CM_CLKOUT_CTRL_OFFSET);
+	prcm_context.prm_clkout_ctrl = prm_read_mod_reg(OMAP3430_CCR_MOD,
+		OMAP3_PRM_CLKOUT_CTRL_OFFSET);
+	prcm_context.sgx_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430ES2_SGX_MOD, PM_WKDEP);
+	prcm_context.dss_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_DSS_MOD, PM_WKDEP);
+	prcm_context.cam_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_CAM_MOD, PM_WKDEP);
+	prcm_context.per_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKDEP);
+	prcm_context.neon_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_NEON_MOD, PM_WKDEP);
+	prcm_context.usbhost_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	prcm_context.core_pm_mpugrpsel1 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430_PM_MPUGRPSEL1);
+	prcm_context.iva2_pm_ivagrpsel1 =
+		 prm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prcm_context.core_pm_mpugrpsel3 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_MPUGRPSEL3);
+	prcm_context.core_pm_ivagrpsel3 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prcm_context.wkup_pm_mpugrpsel =
+		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	prcm_context.wkup_pm_ivagrpsel =
+		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prcm_context.per_pm_mpugrpsel =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+	prcm_context.per_pm_ivagrpsel =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+	prcm_context.wkup_pm_wken = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	return;
+}
+
+void omap3_prcm_restore_context(void)
+{
+	omap_ctrl_writel(prcm_context.control_padconf_sys_nirq,
+					 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+	cm_write_mod_reg(prcm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
+					 CM_CLKSEL1);
+	cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
+					 CM_CLKSEL2);
+	__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.per_cm_clksel, OMAP3430_PER_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
+					 CM_CLKSEL1);
+	cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
+					 CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD,
+					 CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD,
+					OMAP3430ES2_CM_CLKSEL4);
+	cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
+					 OMAP3430ES2_CM_CLKSEL5);
+	cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
+	cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
+					OMAP3430ES2_CM_CLKEN2);
+	__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	cm_write_mod_reg(prcm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
+					OMAP3430_CM_CLKEN_PLL);
+	cm_write_mod_reg(prcm_context.core_cm_fclken1, CORE_MOD, CM_FCLKEN1);
+	cm_write_mod_reg(prcm_context.core_cm_fclken3, CORE_MOD,
+					 OMAP3430ES2_CM_FCLKEN3);
+	cm_write_mod_reg(prcm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.per_cm_fclken, OMAP3430_PER_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.usbhost_cm_fclken,
+					 OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.core_cm_iclken1, CORE_MOD, CM_ICLKEN1);
+	cm_write_mod_reg(prcm_context.core_cm_iclken2, CORE_MOD, CM_ICLKEN2);
+	cm_write_mod_reg(prcm_context.core_cm_iclken3, CORE_MOD, CM_ICLKEN3);
+	cm_write_mod_reg(prcm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.per_cm_iclken, OMAP3430_PER_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.usbhost_cm_iclken,
+					OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
+					CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl,
+					OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD,
+					CM_AUTOIDLE1);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD,
+					CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle3, CORE_MOD,
+					CM_AUTOIDLE3);
+	cm_write_mod_reg(prcm_context.wkup_cm_autoidle, WKUP_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.per_cm_autoidle, OMAP3430_PER_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.usbhost_cm_autoidle,
+					OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.usbhost_cm_sleepdep,
+				OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
+					OMAP3_CM_CLKOUT_CTRL_OFFSET);
+	prm_write_mod_reg(prcm_context.prm_clkout_ctrl, OMAP3430_CCR_MOD,
+					OMAP3_PRM_CLKOUT_CTRL_OFFSET);
+	prm_write_mod_reg(prcm_context.sgx_pm_wkdep, OMAP3430ES2_SGX_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.dss_pm_wkdep, OMAP3430_DSS_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.cam_pm_wkdep, OMAP3430_CAM_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.per_pm_wkdep, OMAP3430_PER_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.neon_pm_wkdep, OMAP3430_NEON_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.usbhost_pm_wkdep,
+					OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel1, CORE_MOD,
+					OMAP3430_PM_MPUGRPSEL1);
+	prm_write_mod_reg(prcm_context.iva2_pm_ivagrpsel1, OMAP3430_IVA2_MOD,
+					OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel3, CORE_MOD,
+					OMAP3430ES2_PM_MPUGRPSEL3);
+	prm_write_mod_reg(prcm_context.core_pm_ivagrpsel3, CORE_MOD,
+					OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(prcm_context.wkup_pm_mpugrpsel, WKUP_MOD,
+					OMAP3430_PM_MPUGRPSEL);
+	prm_write_mod_reg(prcm_context.wkup_pm_ivagrpsel, WKUP_MOD,
+					OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(prcm_context.per_pm_mpugrpsel, OMAP3430_PER_MOD,
+					OMAP3430_PM_MPUGRPSEL);
+	prm_write_mod_reg(prcm_context.per_pm_ivagrpsel, OMAP3430_PER_MOD,
+					 OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(prcm_context.wkup_pm_wken, WKUP_MOD, PM_WKEN);
+	return;
+}
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 9fd03a2..8f21bae6 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -365,6 +365,7 @@
 /* PM_PREPWSTST_GFX specific bits */
 
 /* PM_WKEN_WKUP specific bits */
+#define OMAP3430_EN_IO_CHAIN				(1 << 16)
 #define OMAP3430_EN_IO					(1 << 8)
 #define OMAP3430_EN_GPIO1				(1 << 3)
 
@@ -373,6 +374,7 @@
 /* PM_IVA2GRPSEL_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
+#define OMAP3430_ST_IO_CHAIN				(1 << 16)
 #define OMAP3430_ST_IO					(1 << 8)
 
 /* PRM_CLKSEL */
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 03c467c..a117f85 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -17,11 +17,11 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
new file mode 100644
index 0000000..8bfaf34
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -0,0 +1,51 @@
+/*
+ * SDRC register values for the Hynix H8MBX00U0MER-0EM
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
+
+#include <plat/sdrc.h>
+
+/* Hynix H8MBX00U0MER-0EM */
+static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
+	[0] = {
+		.rate        = 200000000,
+		.actim_ctrla = 0xa2e1b4c6,
+		.actim_ctrlb = 0x0002131c,
+		.rfr_ctrl    = 0x0005e601,
+		.mr          = 0x00000032,
+	},
+	[1] = {
+		.rate        = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr          = 0x00000032,
+	},
+	[2] = {
+		.rate        = 100000000,
+		.actim_ctrla = 0x51912284,
+		.actim_ctrlb = 0x0002120e,
+		.rfr_ctrl    = 0x0002d101,
+		.mr          = 0x00000022,
+	},
+	[3] = {
+		.rate        = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr          = 0x00000022,
+	},
+	[4] = {
+		.rate        = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index 02e1c2d..a391b49 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Micron MT46H32M32LF-6 */
 /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 3751d29..0e518a7 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Qimonda HYB18M512160AF-6 */
 static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 9e3bd4f..9a59219 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,13 +23,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -37,12 +37,38 @@
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+struct omap2_sms_regs {
+	u32	sms_sysconfig;
+};
+
+static struct omap2_sms_regs sms_context;
+
 /* SDRC_POWER register bits */
 #define SDRC_POWER_EXTCLKDIS_SHIFT		3
 #define SDRC_POWER_PWDENA_SHIFT			2
 #define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
+ * omap2_sms_save_context - Save SMS registers
+ *
+ * Save SMS registers that need to be restored after off mode.
+ */
+void omap2_sms_save_context(void)
+{
+	sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
+}
+
+/**
+ * omap2_sms_restore_context - Restore SMS registers
+ *
+ * Restore SMS registers that need to be Restored after off mode.
+ */
+void omap2_sms_restore_context(void)
+{
+	sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
+}
+
+/**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  * @r: SDRC clock rate (in Hz)
  * @sdrc_cs0: chip select 0 ram timings **
@@ -132,4 +158,5 @@
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
+	omap2_sms_save_context();
 }
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 0837eda..48207b0 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;
@@ -48,9 +48,12 @@
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index feaec7e..0f4d27a 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,13 +24,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 #include "clock.h"
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 /* Memory timing, DLL mode flags */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 54dfeb5..2e17b57 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -24,10 +24,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/clock.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/clock.h>
+#include <plat/control.h>
 
 #include "prm.h"
 #include "pm.h"
@@ -73,7 +73,6 @@
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +86,6 @@
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +99,6 @@
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -116,7 +113,6 @@
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -159,8 +155,6 @@
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 
-static int enable_off_mode; /* to be removed by full off-mode patches */
-
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;
@@ -539,7 +533,7 @@
 #define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+static struct omap_uart_state omap_uart[] = {
 	{
 		.pdev = {
 			.name			= "serial8250",
@@ -589,12 +583,22 @@
 	 * if not needed.
 	 */
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
+		/*
+		 * Module 4KB + L4 interconnect 4KB
+		 * Static mapping, never released
+		 */
+		p->membase = ioremap(p->mapbase, SZ_8K);
+		if (!p->membase) {
+			printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+			continue;
+		}
+
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
@@ -631,7 +635,7 @@
 {
 	int i;
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index 130aadb..c7780cc 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -29,7 +29,7 @@
 #include <asm/assembler.h>
 #include <mach/io.h>
 
-#include <mach/omap24xx.h>
+#include <plat/omap24xx.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index e5e2553..15268f8 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -27,22 +27,35 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/control.h>
+#include <plat/control.h>
 
+#include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
 
 #define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
 				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_CORE_P	0x48306AE8
 #define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
 				OMAP3430_PM_PREPWSTST)
-#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL
+#define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
+#define SRAM_BASE_P		0x40200000
+#define CONTROL_STAT		0x480022F0
 #define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
 				       * available */
-#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
-				OMAP343X_CONTROL_MEM_WKUP +\
-				SCRATCHPAD_MEM_OFFS)
+#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
+						+ SCRATCHPAD_MEM_OFFS)
 #define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+#define SDRC_SYSCONFIG_P	(OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
+#define SDRC_MR_0_P		(OMAP343X_SDRC_BASE + SDRC_MR_0)
+#define SDRC_EMR2_0_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_0)
+#define SDRC_MANUAL_0_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
+#define SDRC_MR_1_P		(OMAP343X_SDRC_BASE + SDRC_MR_1)
+#define SDRC_EMR2_1_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_1)
+#define SDRC_MANUAL_1_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
+#define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+#define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 	.text
 /* Function call to get the restore pointer for resume from OFF */
@@ -51,7 +64,93 @@
 	adr	r0, restore
         ldmfd   sp!, {pc}     @ restore regs and return
 ENTRY(get_restore_pointer_sz)
-        .word   . - get_restore_pointer_sz
+        .word   . - get_restore_pointer
+
+	.text
+/* Function call to get the restore pointer for for ES3 to resume from OFF */
+ENTRY(get_es3_restore_pointer)
+	stmfd	sp!, {lr}	@ save registers on stack
+	adr	r0, restore_es3
+	ldmfd	sp!, {pc}	@ restore regs and return
+ENTRY(get_es3_restore_pointer_sz)
+	.word	. - get_es3_restore_pointer
+
+ENTRY(es3_sdrc_fix)
+	ldr	r4, sdrc_syscfg		@ get config addr
+	ldr	r5, [r4]		@ get value
+	tst	r5, #0x100		@ is part access blocked
+	it	eq
+	biceq	r5, r5, #0x100		@ clear bit if set
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_mr_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_0	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	ldr	r4, sdrc_mr_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_1	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	bx	lr
+sdrc_syscfg:
+	.word	SDRC_SYSCONFIG_P
+sdrc_mr_0:
+	.word	SDRC_MR_0_P
+sdrc_emr2_0:
+	.word	SDRC_EMR2_0_P
+sdrc_manual_0:
+	.word	SDRC_MANUAL_0_P
+sdrc_mr_1:
+	.word	SDRC_MR_1_P
+sdrc_emr2_1:
+	.word	SDRC_EMR2_1_P
+sdrc_manual_1:
+	.word	SDRC_MANUAL_1_P
+ENTRY(es3_sdrc_fix_sz)
+	.word	. - es3_sdrc_fix
+
+/* Function to call rom code to save secure ram context */
+ENTRY(save_secure_ram_context)
+	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
+save_secure_ram_debug:
+	/* b save_secure_ram_debug */	@ enable to debug save code
+	adr	r3, api_params		@ r3 points to parameters
+	str	r0, [r3,#0x4]		@ r0 has sdram address
+	ldr	r12, high_mask
+	and	r3, r3, r12
+	ldr	r12, sram_phy_addr_mask
+	orr	r3, r3, r12
+	mov	r0, #25			@ set service ID for PPA
+	mov	r12, r0			@ copy secure service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
+	mov	r6, #0xff
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+	nop
+	nop
+	nop
+	nop
+	ldmfd	sp!, {r1-r12, pc}
+sram_phy_addr_mask:
+	.word	SRAM_BASE_P
+high_mask:
+	.word	0xffff
+api_params:
+	.word	0x4, 0x0, 0x0, 0x1, 0x1
+ENTRY(save_secure_ram_context_sz)
+	.word	. - save_secure_ram_context
+
 /*
  * Forces OMAP into idle state
  *
@@ -92,11 +191,29 @@
 	nop
 	nop
 	nop
-	bl i_dll_wait
+	bl wait_sdrc_ok
 
 	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore_es3:
+	/*b restore_es3*/		@ Enable to debug restore code
+	ldr	r5, pm_prepwstst_core_p
+	ldr	r4, [r5]
+	and	r4, r4, #0x3
+	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
+	bne	restore
+	adr	r0, es3_sdrc_fix
+	ldr	r1, sram_base
+	ldr	r2, es3_sdrc_fix_sz
+	mov	r2, r2, ror #2
+copy_to_sram:
+	ldmia	r0!, {r3}	@ val = *src
+	stmia	r1!, {r3}	@ *dst = val
+	subs	r2, r2, #0x1	@ num_words--
+	bne	copy_to_sram
+	ldr	r1, sram_base
+	blx	r1
 restore:
-	/* b restore*/ 	@ Enable to debug restore code
+	/* b restore*/  @ Enable to debug restore code
         /* Check what was the reason for mpu reset and store the reason in r9*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost - In this case, we wont be here */
@@ -108,9 +225,44 @@
         moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
 	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
+	ldr	r0, control_stat
+	ldr	r1, [r0]
+	and	r1, #0x700
+	cmp	r1, #0x300
+	beq	l2_inv_gp
+	mov	r0, #40		@ set service ID for PPA
+	mov	r12, r0		@ copy secure Service ID in r12
+	mov	r1, #0		@ set task id for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+	/* Write to Aux control register to set some bits */
+	mov	r0, #42		@ set service ID for PPA
+	mov	r12, r0		@ copy secure Service ID in r12
+	mov	r1, #0		@ set task id for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	adr	r3, write_aux_control_params	@ r3 points to parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+
+	b	logic_l1_restore
+l2_inv_api_params:
+	.word   0x1, 0x00
+write_aux_control_params:
+	.word   0x1, 0x72
+l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1                         @ set up to invalide L2
-smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
+	/* Write to Aux control register to set some bits */
+	mov	r0, #0x72
+	mov	r12, #0x3
+	.word 0xE1600070	@ Call SMI monitor (smieq)
 logic_l1_restore:
 	mov	r1, #0
 	/* Invalidate all instruction caches to PoU
@@ -391,33 +543,55 @@
 	nop
 	nop
 	nop
-	bl i_dll_wait
+	bl wait_sdrc_ok
 	/* restore regs and return */
 	ldmfd   sp!, {r0-r12, pc}
 
-i_dll_wait:
-	ldr     r4, clk_stabilize_delay
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+        ldr     r4, cm_idlest1_core
+        ldr     r5, [r4]
+        and     r5, r5, #0x2
+        cmp     r5, #0
+        bne     wait_sdrc_ok
+        ldr     r4, sdrc_power
+        ldr     r5, [r4]
+        bic     r5, r5, #0x40
+        str     r5, [r4]
+wait_dll_lock:
+        /* Is dll in lock mode? */
+        ldr     r4, sdrc_dlla_ctrl
+        ldr     r5, [r4]
+        tst     r5, #0x4
+        bxne    lr
+        /* wait till dll locks */
+        ldr     r4, sdrc_dlla_status
+        ldr     r5, [r4]
+        and     r5, r5, #0x4
+        cmp     r5, #0x4
+        bne     wait_dll_lock
+        bx      lr
 
-i_dll_delay:
-	subs    r4, r4, #0x1
-	bne     i_dll_delay
-	ldr     r4, sdrc_power
-	ldr     r5, [r4]
-	bic     r5, r5, #0x40
-	str     r5, [r4]
-	bx	lr
+cm_idlest1_core:
+	.word	CM_IDLEST1_CORE_V
+sdrc_dlla_status:
+	.word	SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+	.word	SDRC_DLLA_CTRL_V
 pm_prepwstst_core:
 	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_core_p:
+	.word	PM_PREPWSTST_CORE_P
 pm_prepwstst_mpu:
 	.word	PM_PREPWSTST_MPU_V
 pm_pwstctrl_mpu:
 	.word	PM_PWSTCTRL_MPU_P
 scratchpad_base:
 	.word	SCRATCHPAD_BASE_P
+sram_base:
+	.word	SRAM_BASE_P + 0x8000
 sdrc_power:
 	.word SDRC_POWER_V
-context_mem:
-	.word	0x803E3E14
 clk_stabilize_delay:
 	.word 0x000001FF
 assoc_mask:
@@ -432,5 +606,7 @@
 	.word	0x00000C02
 cache_pred_disable_mask:
 	.word	0xFFFFE7FB
+control_stat:
+	.word	CONTROL_STAT
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 9b62208..92e6e1a 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index df2cd92..ab49736 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index e2338c0..cd04dea 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -37,7 +37,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
@@ -47,6 +47,7 @@
 static struct clock_event_device clockevent_gpt;
 static u8 __initdata gptimer_id = 1;
 static u8 __initdata inited;
+struct omap_dm_timer *gptimer_wakeup;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
@@ -134,6 +135,7 @@
 
 	gptimer = omap_dm_timer_request_specific(gptimer_id);
 	BUG_ON(gptimer == NULL);
+	gptimer_wakeup = gptimer;
 
 #if defined(CONFIG_OMAP_32K_TIMER)
 	src = OMAP_TIMER_SRC_32_KHZ;
@@ -231,7 +233,8 @@
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+	BUG_ON(!twd_base);
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
new file mode 100644
index 0000000..e448abd
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -0,0 +1,192 @@
+/*
+ * linux/arch/arm/mach-omap2/usb-ehci.c
+ *
+ * This file will contain the board specific details for the
+ * Synopsys EHCI host controller on OMAP3430
+ *
+ * Copyright (C) 2007 Texas Instruments
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <plat/mux.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <plat/usb.h>
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+
+static struct resource ehci_resources[] = {
+	{
+		.start	= OMAP34XX_EHCI_BASE,
+		.end	= OMAP34XX_EHCI_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_UHH_CONFIG_BASE,
+		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_USBTLL_BASE,
+		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{         /* general IRQ */
+		.start   = INT_34XX_EHCI_IRQ,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+static struct platform_device ehci_device = {
+	.name           = "ehci-omap",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &ehci_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data          = NULL,
+	},
+	.num_resources  = ARRAY_SIZE(ehci_resources),
+	.resource       = ehci_resources,
+};
+
+/* MUX settings for EHCI pins */
+/*
+ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
+ */
+static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
+		omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
+		omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
+		omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
+		omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
+		omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
+		omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
+		omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
+		omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
+		omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
+		omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
+		omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
+		omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
+		omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
+		omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
+		omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
+		omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
+		omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
+		omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
+		omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
+		omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
+		omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
+		omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	switch (port_mode[1]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
+		omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
+		omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
+		omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
+		omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
+		omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
+		omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
+		omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
+		omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
+		omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
+		omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
+		omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
+		omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
+		omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
+		omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
+		omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
+		omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
+		omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
+		omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
+		omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
+		omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
+		omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
+		omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	switch (port_mode[2]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
+		omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
+		omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
+		omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
+		omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
+		omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
+		omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
+		omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
+		omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
+		omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
+		omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
+		omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	return;
+}
+
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+{
+	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
+
+	/* Setup Pin IO MUX for EHCI */
+	if (cpu_is_omap34xx())
+		setup_ehci_io_mux(pdata->port_mode);
+
+	if (platform_device_register(&ehci_device) < 0) {
+		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+		return;
+	}
+}
+
+#else
+
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+
+{
+}
+
+#endif /* CONFIG_USB_EHCI_HCD */
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 1145a25..a80441d 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,8 +28,8 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
 
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8622c24..10a2013 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -16,8 +16,8 @@
 
 #include <linux/usb/musb.h>
 
-#include <mach/gpmc.h>
-#include <mach/mux.h>
+#include <plat/gpmc.h>
+#include <plat/mux.h>
 
 
 static u8		async_cs, sync_cs;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a6f8eab..d89c6ad 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,34 +2,105 @@
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA300
-	bool "PXA300 (codename Monahans-L)"
+config MACH_MAINSTONE
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA310
-	bool "PXA310 (codename Monahans-LV)"
+config MACH_ZYLONITE
+	bool
+	select PXA3xx
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
 	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
 
-config CPU_PXA320
-	bool "PXA320 (codename Monahans-P)"
+config MACH_ZYLONITE320
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
 
-config CPU_PXA930
-	bool "PXA930 (codename Tavor-P)"
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select PXA3xx
+	select PXA_SSP
 
-config CPU_PXA935
-	bool "PXA935 (codename Tavor-P65)"
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
 	select CPU_PXA930
 
-config CPU_PXA950
-	bool "PXA950 (codename Tavor-PV2)"
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
 	select CPU_PXA930
 
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
 
-endif
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	select PXA25x
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select PXA27x
+	select IWMMXT
+	select PXA25x
+	select PXA_SSP
+
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
+	select PXA27x
+
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -62,11 +133,56 @@
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform"
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
 	select PXA25x
-	select SA1111
-	select PXA_HAVE_BOARD_IRQS
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+	select PXA_SSP
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
@@ -74,25 +190,215 @@
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform"
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	select HAVE_PWM
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+	bool "Toradex Colibri PXA270"
+	select PXA27x
+
+config MACH_COLIBRI300
+	bool "Toradex Colibri PXA300/310"
+	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
+	select HAVE_PWM
+
+config MACH_COLIBRI320
+	bool "Toradex Colibri PXA320"
+	select PXA3xx
+	select CPU_PXA320
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
+config MACH_MAGICIAN
+	bool "Enable HTC Magician Support"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
+	select GPIO_SYSFS
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
+
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
 config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
-config MACH_BALLOON3
-	bool "Balloon 3 board"
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
+
+config MACH_PALMTE2
+	bool "Palm Tungsten|E2"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+	  handheld computer.
+
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
 
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
+
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
+config MACH_PALMLD
+	bool "Palm LifeDrive"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+	  smartphone.
+
+config MACH_TREO680
+	bool "Palm Treo 680"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
 
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@@ -169,15 +475,6 @@
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-	select PXA_HAVE_ISA_IRQS
-
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -234,297 +531,6 @@
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-	select PXA_SSP
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
-	select PXA27x
-
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
-	select PXA27x
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	select PXA27x
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
-	select CPU_PXA300
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	select PXA3xx
-	select CPU_PXA320
-
-config MACH_ZYLONITE
-	bool "PXA3xx Development Platform (aka Zylonite)"
-	select PXA3xx
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select PXA_SSP
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select PXA_SSP
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-	select FB_W100
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-	select GPIO_SYSFS
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
-	select IWMMXT
-	select PXA_SSP
-	select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	select HAVE_PWM
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable supprot for CSB701 baseboard"
-	depends on MACH_CSB726
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PARTITIONS
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	select PXA_SSP
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
 endmenu
 
 config PXA25x
@@ -551,6 +557,42 @@
 	help
 	  Select code specific to PXA3xx variants
 
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+	bool
+	select CPU_PXA930
+	help
+	  PXA950 (codename Tavor-PV2)
+
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f10e152..b5d29e6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -24,33 +24,63 @@
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
-# Specific board support
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
+obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
+obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
+
+# 3rd Party Dev Platforms
+obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
+obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
+obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -58,34 +88,6 @@
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_TREO680)	+= treo680.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
-  obj-y				+= zylonite.o
-  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
-  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -95,8 +97,4 @@
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f23138b..b8cd07c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -306,6 +306,10 @@
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
 		pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b50ef39..bff6e78 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -453,6 +453,10 @@
 
 static void __init cmx2xx_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	cmx2xx_pm_init();
 
 	if (cpu_is_pxa25x())
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 102916f..d37cfa1 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -3,9 +3,10 @@
  *
  * Support for the CompuLab CM-X300 modules
  *
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
  *
  * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
 #include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
 
 #include <asm/mach/map.h>
 
 #include "generic.h"
+#include "devices.h"
 
 #define CM_X300_ETH_PHYS	0x08000010
 
@@ -53,7 +65,7 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
 	GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@
 	GPIO36_UART1_DTR,
 
 	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
@@ -151,6 +162,50 @@
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* PWM Backlight */
+	GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO77_GPIO,			/* WiFi reset */
+	GPIO78_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO76_GPIO,			/* LED */
+	GPIO71_GPIO,			/* WiFi reset */
+	GPIO70_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+	/* USB PORT 2 */
+	ULPI_STP,
+	ULPI_NXT,
+	ULPI_DIR,
+	GPIO30_ULPI_DATA_OUT_0,
+	GPIO31_ULPI_DATA_OUT_1,
+	GPIO32_ULPI_DATA_OUT_2,
+	GPIO33_ULPI_DATA_OUT_3,
+	GPIO34_ULPI_DATA_OUT_4,
+	GPIO35_ULPI_DATA_OUT_5,
+	GPIO36_ULPI_DATA_OUT_6,
+	GPIO37_ULPI_DATA_OUT_7,
+	GPIO38_ULPI_CLK,
+	/* external PHY reset pin */
+	GPIO127_GPIO,
+
+	/* USB PORT 3 */
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+	GPIO0_2_USBH_PEN,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@
 static inline void cm_x300_init_dm9000(void) {}
 #endif
 
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 	[0] = {
-		.pixclock	= 38000,
+		.pixclock	= 38250,
 		.bpp		= 16,
 		.xres		= 480,
 		.yres		= 640,
 		.hsync_len	= 8,
 		.vsync_len	= 2,
 		.left_margin	= 8,
-		.upper_margin	= 0,
+		.upper_margin	= 2,
 		.right_margin	= 24,
 		.lower_margin	= 4,
 		.cmap_greyscale	= 0,
@@ -227,7 +283,7 @@
 
 static struct pxafb_mach_info cm_x300_lcd = {
 	.modes			= cm_x300_lcd_modes,
-	.num_modes		= 2,
+	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
@@ -239,6 +295,87 @@
 static inline void cm_x300_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+	.pwm_id		= 2,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data	= &cm_x300_backlight_data,
+	},
+};
+
+static void cm_x300_init_bl(void)
+{
+	platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE	(144)
+#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
+#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
+#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
+#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM	(1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+	.sck		= GPIO_LCD_SCL,
+	.mosi		= GPIO_LCD_DIN,
+	.miso		= GPIO_LCD_DOUT,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+	.name		= "spi_gpio",
+	.id		= LCD_SPI_BUS_NUM,
+	.dev		= {
+		.platform_data	= &cm_x300_spi_gpio_pdata,
+	},
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= LCD_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.controller_data	= (void *) GPIO_LCD_CS,
+		.platform_data		= &cm_x300_tdo24m_pdata,
+	},
+};
+
+static void __init cm_x300_init_spi(void)
+{
+	spi_register_board_info(cm_x300_spi_devices,
+				ARRAY_SIZE(cm_x300_spi_devices));
+	platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
@@ -333,9 +470,19 @@
 #endif
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+	if (cpu_is_pxa300())
+		UP2OCR = UP2OCR_HXS
+			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
 static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+	.init		= cm_x300_ohci_init,
 };
 
 static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@
 	[0] = {
 		.name = "cm-x300:green",
 		.default_trigger = "heartbeat",
-		.gpio = 79,
 		.active_low = 1,
 	},
 };
@@ -371,6 +517,11 @@
 
 static void __init cm_x300_init_leds(void)
 {
+	if (system_rev < 130)
+		cm_x300_leds[0].gpio = 79;
+	else
+		cm_x300_leds[0].gpio = 76;
+
 	platform_device_register(&cm_x300_led_device);
 }
 #else
@@ -433,11 +584,94 @@
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+	{
+		.name = "da903x-backlight",
+		.id = DA9030_ID_WLED,
+	}
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+	.subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+	int bt_reset, wlan_en;
+	int err;
+
+	if (system_rev < 130) {
+		wlan_en = 77;
+		bt_reset = 78;
+	} else {
+		wlan_en = 71;
+		bt_reset = 70;
+	}
+
+	/* Libertas and CSR reset */
+	err = gpio_request(wlan_en, "wlan en");
+	if (err) {
+		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+	} else {
+		gpio_direction_output(wlan_en, 1);
+		gpio_free(wlan_en);
+	}
+
+	err = gpio_request(bt_reset, "bt reset");
+	if (err) {
+		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+	} else {
+		gpio_direction_output(bt_reset, 1);
+		udelay(10);
+		gpio_set_value(bt_reset, 0);
+		udelay(10);
+		gpio_set_value(bt_reset, 1);
+		gpio_free(bt_reset);
+	}
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
 {
 	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
 
+	if (system_rev < 130)
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+	else
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+	cm_x300_init_mfp();
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
 	cm_x300_init_ohci();
@@ -445,7 +679,11 @@
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_spi();
 	cm_x300_init_rtc();
+	cm_x300_init_ac97();
+	cm_x300_init_wi2wi();
+	cm_x300_init_bl();
 }
 
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 01bcfaa..061c453 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -130,6 +130,9 @@
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
 }
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 37c239c..45c23fd 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -170,6 +170,10 @@
 
 void __init colibri_pxa300_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
 	colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ec0e14b..ae835fa 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -199,6 +199,10 @@
 
 void __init colibri_pxa320_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
 	colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index efebaf4..e6c0a22 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,7 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b536b5a..74446cf 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -671,6 +671,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index a093282..d4a0733 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -214,8 +214,8 @@
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 983cc8c..9e4d981 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -447,6 +447,7 @@
 		pxa27x_freq_table[i].frequency = freq;
 		pxa27x_freq_table[i].index = i;
 	}
+	pxa27x_freq_table[i].index = i;
 	pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	/*
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 67f34a8..149cdd9 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -102,7 +102,7 @@
 		table[i].index = i;
 		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
 	}
-	table[num].frequency = i;
+	table[num].index = i;
 	table[num].frequency = CPUFREQ_TABLE_END;
 
 	pxa3xx_freqs = freqs;
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 965480e..88575b8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -268,6 +268,9 @@
 /*	MSC2 = 0x06697ff4; *//* none/SM501 */
 	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 46fabe1c..3395463 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,18 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
+#include <mach/hardware.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -167,13 +168,18 @@
 	}
 };
 
-struct platform_device pxa_device_ffuart= {
+struct platform_device pxa_device_ffuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
 	.resource	= pxa_resource_ffuart,
 	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
 };
 
+void __init pxa_set_ffuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_ffuart, info);
+}
+
 static struct resource pxa_resource_btuart[] = {
 	{
 		.start	= 0x40200000,
@@ -193,6 +199,11 @@
 	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
 };
 
+void __init pxa_set_btuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_btuart, info);
+}
+
 static struct resource pxa_resource_stuart[] = {
 	{
 		.start	= 0x40700000,
@@ -212,6 +223,11 @@
 	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
 };
 
+void __init pxa_set_stuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_stuart, info);
+}
+
 static struct resource pxa_resource_hwuart[] = {
 	{
 		.start	= 0x41600000,
@@ -231,6 +247,14 @@
 	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
 };
 
+void __init pxa_set_hwuart_info(void *info)
+{
+	if (cpu_is_pxa255())
+		pxa_register_device(&pxa_device_hwuart, info);
+	else
+		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
 static struct resource pxai2c_resources[] = {
 	{
 		.start	= 0x40301680,
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 74d3f89..8fde338 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -55,6 +55,9 @@
 
 static void __init e330_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 0800362..f50f055 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -56,6 +56,9 @@
 
 static void __init e350_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index ed9c0c3..55b950f 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -130,6 +130,9 @@
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 49acdfa..94b23a9 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -192,6 +192,9 @@
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 4052ece..5eccbce 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -194,6 +194,9 @@
 static void __init e750_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 9866c7b..aad129b 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -195,6 +195,9 @@
 
 static void __init e800_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index aec7f42..1c0de80 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -967,7 +967,7 @@
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 static struct regulator *em_x270_camera_ldo;
 
-static int em_x270_sensor_init(struct device *dev)
+static int em_x270_sensor_init(void)
 {
 	int ret;
 
@@ -996,7 +996,6 @@
 }
 
 struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.init	= em_x270_sensor_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 	.mclk_10khz = 2600,
@@ -1049,8 +1048,10 @@
 
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_camera_info(&em_x270_camera_platform_data);
-	platform_device_register(&em_x270_camera);
+	if (em_x270_sensor_init() == 0) {
+		pxa_set_camera_info(&em_x270_camera_platform_data);
+		platform_device_register(&em_x270_camera);
+	}
 }
 #else
 static inline void em_x270_init_camera(void) {}
@@ -1286,6 +1287,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 #ifdef CONFIG_PM
 	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
 #endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 588b265..626c82b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,7 +17,11 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -29,6 +33,7 @@
 #include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -38,6 +43,9 @@
 #define GPIO15_A910_FLIP_LID 		15
 #define GPIO12_E680_LOCK_SWITCH 	12
 #define GPIO15_E6_LOCK_SWITCH 		15
+#define GPIO50_nCAM_EN			50
+#define GPIO19_GEN1_CAM_RST		19
+#define GPIO28_GEN2_CAM_RST		28
 
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
@@ -191,8 +199,8 @@
 	GPIO94_CIF_DD_5,
 	GPIO17_CIF_DD_6,
 	GPIO108_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO19_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 
 	/* EMU */
 	GPIO120_GPIO,				/* EMU_MUX1 */
@@ -248,8 +256,8 @@
 	GPIO48_CIF_DD_5,
 	GPIO93_CIF_DD_6,
 	GPIO12_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO28_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 	GPIO17_GPIO,				/* CAM_FLASH */
 };
 #endif
@@ -683,6 +691,81 @@
 	},
 };
 
+/* camera */
+static int a780_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO19_GEN1_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+	.bus_id         = 0,
+	.flags          = SOCAM_SENSOR_INVERT_PCLK,
+	.i2c_adapter_id = 0,
+	.board_info     = &a780_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a780_camera_power,
+	.reset          = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a780_iclink,
+	},
+};
+
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
 };
@@ -693,12 +776,21 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 
 	set_pxa_fb_info(&ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
+	if (a780_camera_init() == 0) {
+		pxa_set_camera_info(&a780_pxacamera_platform_data);
+		platform_device_register(&a780_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -754,6 +846,10 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
@@ -816,6 +912,10 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
@@ -864,6 +964,131 @@
 	},
 };
 
+/* camera */
+static int a910_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO28_GEN2_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+	.bus_id         = 0,
+	.i2c_adapter_id = 0,
+	.board_info     = &a910_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a910_camera_power,
+	.reset          = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a910_iclink,
+	},
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+	.leds_size = LP3944_LEDS_MAX,
+	.leds = {
+		[0] = {
+			.name = "a910:red:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[1] = {
+			.name = "a910:green:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[2] {
+			.name = "a910:blue:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		/* Leds 3 and 4 are used as display power switches */
+		[3] = {
+			.name = "a910::cli_display",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[4] = {
+			.name = "a910::main_display",
+			.status = LP3944_LED_STATUS_ON,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[5] = { .type = LP3944_LED_TYPE_NONE },
+		[6] = {
+			.name = "a910::torch",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[7] = {
+			.name = "a910::flash",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED,
+		},
+	},
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("lp3944", 0x60),
+		.platform_data = &a910_lp3944_leds,
+	},
+};
+
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
 };
@@ -874,12 +1099,22 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
 	set_pxa_fb_info(&ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
+	if (a910_camera_init() == 0) {
+		pxa_set_camera_info(&a910_pxacamera_platform_data);
+		platform_device_register(&a910_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -935,6 +1170,10 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
@@ -971,6 +1210,10 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 485fede..890fb90 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -67,3 +67,8 @@
 extern struct sysdev_class pxa_gpio_sysclass;
 extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1708c01..96c3451 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -211,6 +211,11 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index f3d220c..c1cab08 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -193,6 +193,9 @@
 	fix_msc();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_udc_info(&h5000_udc_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index cea99fe..f9a2e4b 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -150,6 +150,9 @@
 
 static void __init himalaya_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	himalaya_lcd_init();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 83bd3c6..848c861 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -820,6 +820,7 @@
 	&gpio_keys,
 	&backlight,
 	&w3220,
+	&hx4700_lcd,
 	&egpio,
 	&bq24022,
 	&gpio_vbus,
@@ -849,6 +850,10 @@
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
 	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	pxa_set_ficp_info(&ficp_info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6486ef..5c9e11d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -179,6 +179,9 @@
 	printk("idp_init()\n");
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2a4945d..5b0862d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -554,8 +554,12 @@
 
 static void __init imote2_init(void)
 {
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index aa3d9f7..50f1297 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -105,6 +105,7 @@
  *
  *  PXA935	A0	0x56056931	0x1E653013
  *  PXA935	B0	0x56056936	0x6E653013
+ *  PXA935	B1	0x56056938	0x8E653013
  */
 #ifdef CONFIG_PXA25x
 #define __cpu_is_pxa210(id)				\
@@ -283,7 +284,7 @@
 		_id == 0x3;				\
 	 })
 
-#define __cpu_is_pxa9xx(id)				\
+#define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
@@ -299,9 +300,9 @@
 		__cpu_is_pxa3xx(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa9xx()					\
+#define cpu_is_pxa93x()					\
 	({						\
-		__cpu_is_pxa9xx(read_cpuid_id());	\
+		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
 /*
  * return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
new file mode 100644
index 0000000..2d3f14e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -0,0 +1,67 @@
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
+ *
+ * Author:     Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT	0
+#define GPIO_NR_TREO_AMP_EN		27
+#define GPIO_NR_TREO_GREEN_LED	20
+#define GPIO_NR_TREO_RED_LED		79
+#define GPIO_NR_TREO_SD_DETECT_N	113
+#define GPIO_NR_TREO_EP_DETECT_N	116
+#define GPIO_NR_TREO_USB_DETECT	1
+#define GPIO_NR_TREO_USB_PULLUP	114
+#define GPIO_NR_TREO_GSM_POWER	40
+#define GPIO_NR_TREO_GSM_RESET	87
+#define GPIO_NR_TREO_GSM_WAKE	57
+#define GPIO_NR_TREO_GSM_HOST_WAKE	14
+#define GPIO_NR_TREO_GSM_TRIGGER	10
+#define GPIO_NR_TREO_IR_EN		115
+#define GPIO_NR_TREO_IR_TXD		47
+#define GPIO_NR_TREO_BL_POWER	38
+#define GPIO_NR_TREO_LCD_POWER	25
+
+/* Treo680 specific GPIOs */
+#ifdef CONFIG_MACH_TREO680
+#define GPIO_NR_TREO680_SD_READONLY	33
+#define GPIO_NR_TREO680_SD_POWER	42
+#define GPIO_NR_TREO680_VIBRATE_EN	44
+#define GPIO_NR_TREO680_KEYB_BL		24
+#define GPIO_NR_TREO680_BT_EN		43
+#endif /* CONFIG_MACH_TREO680 */
+
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER		21
+#define GPIO_NR_CENTRO_VIBRATE_EN	22
+#define GPIO_NR_CENTRO_KEYB_BL		33
+#define GPIO_NR_CENTRO_BT_EN		80
+
+/* Various addresses  */
+#define TREO_PHYS_RAM_START	0xa0000000
+#define TREO_PHYS_IO_START	0x40000000
+#define TREO_STR_BASE	0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY		254
+#define TREO_DEFAULT_INTENSITY	160
+#define TREO_LIMIT_MASK		0x7F
+#define TREO_PRESCALER		63
+#define TREO_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index f73061c..160ec83 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -76,7 +76,8 @@
 	u_char		bpp;
 	u_int		cmap_greyscale:1,
 			depth:8,
-			unused:23;
+			transparency:1,
+			unused:22;
 
 	/* Parallel Mode Timing */
 	u_char		hsync_len;
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
new file mode 100644
index 0000000..44b0b20
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -0,0 +1,199 @@
+#ifndef __ASM_ARCH_PXA3xx_U2D_H
+#define __ASM_ARCH_PXA3xx_U2D_H
+
+#include <mach/bitfield.h>
+
+/*
+ * USB2 device controller registers and bits definitions
+ */
+#define U2DCR		(0x0000)	/* U2D Control Register */
+#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
+#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
+#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
+#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
+#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
+#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
+#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
+#define U2DCR_CC	(1   << 19)	/* Configuration Change */
+#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
+#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
+#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
+#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
+#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
+#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
+#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
+#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
+#define U2DCR_UDA	(1   << 1)	/* U2D Active */
+#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
+
+#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
+#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
+#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
+#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
+#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
+#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
+#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
+#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
+#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
+#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
+#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
+#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
+
+#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
+
+#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
+#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
+#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
+
+#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
+#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
+#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
+#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
+#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
+
+#ifdef CONFIG_CPU_PXA930
+#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
+#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
+#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
+#endif
+
+#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
+#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
+#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
+#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
+#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
+#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
+
+#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
+#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
+
+#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
+#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
+#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
+#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
+#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
+#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
+#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
+#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
+#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
+#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
+#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
+#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
+#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
+#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
+#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
+#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
+
+#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
+#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
+#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
+#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
+#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
+#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
+#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
+#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
+#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
+#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
+#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
+#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
+
+#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
+#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
+#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
+#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
+#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
+#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
+
+#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
+#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
+#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
+#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
+#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
+
+#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
+#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
+#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
+#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
+#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
+#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
+#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
+#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
+#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
+#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
+#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
+#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
+#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
+#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
+#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
+#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
+#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
+#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
+#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
+
+#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
+#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
+
+#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
+
+#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
+#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
+#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
+
+#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
+#define U2DSCA_VALUE	(0x0120)
+
+#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
+#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
+
+/* U2DMA registers */
+#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
+#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
+#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
+#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
+#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
+#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
+#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
+#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
+#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
+#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
+#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
+#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
+#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
+#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
+#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
+
+#define U2DMACR		(0x1080)		/* U2DMA Control Register */
+#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
+
+#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
+#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
+
+#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
+#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
+
+#define U2DMADADR_STOP	(1U << 0)
+
+#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
+#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
+#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
+#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
+
+#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
+#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
+
+#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
+#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
+#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
+
+#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
deleted file mode 100644
index af443b2..0000000
--- a/arch/arm/mach-pxa/include/mach/treo680.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo 680 smartphone
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_TREO680_H_
-#define _INCLUDE_TREO680_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO680_POWER_DETECT	0
-#define GPIO_NR_TREO680_AMP_EN		27
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_GREEN_LED	20
-#define GPIO_NR_TREO680_RED_LED		79
-#define GPIO_NR_TREO680_SD_DETECT_N	113
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_EP_DETECT_N	116
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_USB_DETECT	1
-#define GPIO_NR_TREO680_USB_PULLUP	114
-#define GPIO_NR_TREO680_GSM_POWER	40
-#define GPIO_NR_TREO680_GSM_RESET	87
-#define GPIO_NR_TREO680_GSM_WAKE	57
-#define GPIO_NR_TREO680_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO680_GSM_TRIGGER	10
-#define GPIO_NR_TREO680_BT_EN		43
-#define GPIO_NR_TREO680_IR_EN		115
-#define GPIO_NR_TREO680_IR_TXD		47
-#define GPIO_NR_TREO680_BL_POWER	38
-#define GPIO_NR_TREO680_LCD_POWER	25
-
-/* Various addresses  */
-#define TREO680_PHYS_RAM_START	0xa0000000
-#define TREO680_PHYS_IO_START	0x40000000
-#define TREO680_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO680_MAX_INTENSITY		254
-#define TREO680_DEFAULT_INTENSITY	160
-#define TREO680_LIMIT_MASK		0x7F
-#define TREO680_PRESCALER		63
-#define TREO680_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 1384895..f28c171 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -44,10 +44,10 @@
 #include <mach/ssp.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 
@@ -413,6 +413,10 @@
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/*
 	 * Note: we depend bootloader set the correct
 	 * value to MSC register for SMC91x.
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d64395f..1373c22 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -455,6 +455,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c6a94d3..98ee7e5 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -518,6 +518,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5360c07..8a38d60 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -742,6 +742,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a4eeae3..851ee0f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -576,6 +576,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 3cab452..2466a44 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -798,6 +798,9 @@
 	UP2OCR = UP2OCR_HXOE;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index a65713c..6d45039 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -84,6 +84,9 @@
 static void __init mp900c_init(void)
 {
 	printk(KERN_INFO "MobilePro 900/C machine init\n");
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1ad029d..5914021 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -530,6 +530,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 2dd7ce2..7f89ca2 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -419,6 +419,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 0b92291..3084175 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -416,6 +416,11 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	set_pxa_fb_info(&palmtc_lcd_screen);
 	pxa_set_mci_info(&palmtc_mci_platform_data);
 	pxa_set_udc_info(&palmtc_udc_info);
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 277c406..265d62b 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -373,6 +373,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
new file mode 100644
index 0000000..606eb7e
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -0,0 +1,716 @@
+/*
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
+ *
+ * Author:     Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+#include <linux/sysdev.h>
+#include <linux/w1-gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/palmtreo.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/ohci.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/palmasoc.h>
+#include <mach/camera.h>
+
+#include <sound/pxa2xx-lib.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long treo_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO113_GPIO,				/* SD detect */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO89_AC97_SYSCLK,
+	GPIO95_AC97_nRESET,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
+
+	/* MATRIX KEYPAD */
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO97_KP_MKIN_3,
+	GPIO98_KP_MKIN_4,
+	GPIO91_KP_MKIN_6,
+	GPIO13_KP_MKIN_7,
+	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* Quick Capture Interface */
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* GSM */
+	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO39_FFUART_TXD,
+	GPIO41_FFUART_RTS,
+
+	/* MISC. */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
+	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
+	GPIO116_GPIO,				/* headphone detect */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
+};
+
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+	GPIO33_GPIO,    /* SD read only */
+
+	/* MATRIX KEYPAD - different wake up source */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+	/* Bluetooth attached to BT UART*/
+	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* MATRIX KEYPAD - different wake up source */
+	GPIO100_KP_MKIN_0,
+	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct pxamci_platform_data treo680_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
+	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct pxamci_platform_data centro_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO_NR_CENTRO_SD_POWER,
+	.gpio_power_invert	= 1,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static unsigned int treo680_matrix_keys[] = {
+	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
+	KEY(0, 1, KEY_LEFT),
+	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
+	KEY(0, 3, KEY_L),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_P),
+
+	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
+	KEY(1, 1, KEY_RIGHT),
+	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
+	KEY(1, 3, KEY_Z),
+	KEY(1, 4, KEY_S),
+	KEY(1, 5, KEY_W),
+
+	KEY(2, 0, KEY_F1),		/* Phone */
+	KEY(2, 1, KEY_UP),
+	KEY(2, 2, KEY_0),
+	KEY(2, 3, KEY_X),
+	KEY(2, 4, KEY_D),
+	KEY(2, 5, KEY_E),
+
+	KEY(3, 0, KEY_F10),		/* Calendar */
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_SPACE),
+	KEY(3, 3, KEY_C),
+	KEY(3, 4, KEY_F),
+	KEY(3, 5, KEY_R),
+
+	KEY(4, 0, KEY_F12),		/* Mail */
+	KEY(4, 1, KEY_KPENTER),
+	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
+	KEY(4, 3, KEY_V),
+	KEY(4, 4, KEY_G),
+	KEY(4, 5, KEY_T),
+
+	KEY(5, 0, KEY_F9),		/* Home */
+	KEY(5, 1, KEY_PAGEUP),		/* Side up */
+	KEY(5, 2, KEY_DOT),
+	KEY(5, 3, KEY_B),
+	KEY(5, 4, KEY_H),
+	KEY(5, 5, KEY_Y),
+
+	KEY(6, 0, KEY_TAB),		/* Side Activate */
+	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
+	KEY(6, 2, KEY_ENTER),
+	KEY(6, 3, KEY_N),
+	KEY(6, 4, KEY_J),
+	KEY(6, 5, KEY_U),
+
+	KEY(7, 0, KEY_F6),		/* Green/Call */
+	KEY(7, 1, KEY_O),
+	KEY(7, 2, KEY_BACKSPACE),
+	KEY(7, 3, KEY_M),
+	KEY(7, 4, KEY_K),
+	KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= treo680_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
+	.direct_key_map		= { KEY_CONNECT },
+	.direct_key_num		= 1,
+
+	.debounce_interval	= 30,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned int centro_matrix_keys[] = {
+	KEY(0, 0, KEY_F9),		/* Home */
+	KEY(0, 1, KEY_LEFT),
+	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
+	KEY(0, 3, KEY_L),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_P),
+
+	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
+	KEY(1, 1, KEY_RIGHT),
+	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
+	KEY(1, 3, KEY_Z),
+	KEY(1, 4, KEY_S),
+	KEY(1, 5, KEY_W),
+
+	KEY(2, 0, KEY_F1),		/* Phone */
+	KEY(2, 1, KEY_UP),
+	KEY(2, 2, KEY_0),
+	KEY(2, 3, KEY_X),
+	KEY(2, 4, KEY_D),
+	KEY(2, 5, KEY_E),
+
+	KEY(3, 0, KEY_F10),		/* Calendar */
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_SPACE),
+	KEY(3, 3, KEY_C),
+	KEY(3, 4, KEY_F),
+	KEY(3, 5, KEY_R),
+
+	KEY(4, 0, KEY_F12),		/* Mail */
+	KEY(4, 1, KEY_KPENTER),
+	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
+	KEY(4, 3, KEY_V),
+	KEY(4, 4, KEY_G),
+	KEY(4, 5, KEY_T),
+
+	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
+	KEY(5, 1, KEY_PAGEUP),		/* Side up */
+	KEY(5, 2, KEY_DOT),
+	KEY(5, 3, KEY_B),
+	KEY(5, 4, KEY_H),
+	KEY(5, 5, KEY_Y),
+
+	KEY(6, 0, KEY_TAB),		/* Side Activate */
+	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
+	KEY(6, 2, KEY_ENTER),
+	KEY(6, 3, KEY_N),
+	KEY(6, 4, KEY_J),
+	KEY(6, 5, KEY_U),
+
+	KEY(7, 0, KEY_F6),		/* Green/Call */
+	KEY(7, 1, KEY_O),
+	KEY(7, 2, KEY_BACKSPACE),
+	KEY(7, 3, KEY_M),
+	KEY(7, 4, KEY_K),
+	KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= centro_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(centro_matrix_keys),
+	.direct_key_map		= { KEY_CONNECT },
+	.direct_key_num		= 1,
+
+	.debounce_interval	= 30,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+
+static pxa2xx_audio_ops_t treo_ac97_pdata = {
+	.reset_gpio	= 95,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int treo_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_TREO_BL_POWER);
+err:
+	return ret;
+}
+
+static int treo_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
+	return TREO_MAX_INTENSITY - brightness;
+};
+
+static void treo_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_TREO_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data treo_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= TREO_MAX_INTENSITY,
+	.dft_brightness	= TREO_DEFAULT_INTENSITY,
+	.pwm_period_ns	= TREO_PERIOD_NS,
+	.init		= treo_backlight_init,
+	.notify		= treo_backlight_notify,
+	.exit		= treo_backlight_exit,
+};
+
+static struct platform_device treo_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &treo_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data treo_ficp_info = {
+	.gpio_pwdown		= GPIO_NR_TREO_IR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_TREO_USB_DETECT,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_TREO_USB_PULLUP,
+};
+
+
+/******************************************************************************
+ * USB host
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct pxaohci_platform_data treo680_ohci_info = {
+	.port_mode    = PMM_PERPORT_MODE,
+	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
+	.power_budget = 0,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_TREO_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int treo_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_TREO_POWER_DETECT);
+}
+
+static char *treo_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init		 = power_supply_init,
+	.is_ac_online    = treo_is_ac_online,
+	.exit		 = power_supply_exit,
+	.supplied_to     = treo_supplicants,
+	.num_supplicants = ARRAY_SIZE(treo_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Vibra and LEDs
+ ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
+static struct gpio_led treo680_gpio_leds[] = {
+	{
+		.name			= "treo680:vibra:vibra",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
+	},
+	{
+		.name			= "treo680:green:led",
+		.default_trigger	= "mmc0",
+		.gpio			= GPIO_NR_TREO_GREEN_LED,
+	},
+	{
+		.name			= "treo680:white:keybbl",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_TREO680_KEYB_BL,
+	},
+};
+
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+	.leds		= treo680_gpio_leds,
+	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
+};
+
+static struct platform_device treo680_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &treo680_gpio_led_info,
+	}
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct gpio_led centro_gpio_leds[] = {
+	{
+		.name			= "centro:vibra:vibra",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
+	},
+	{
+		.name			= "centro:green:led",
+		.default_trigger	= "mmc0",
+		.gpio			= GPIO_NR_TREO_GREEN_LED,
+	},
+	{
+		.name			= "centro:white:keybbl",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
+	},
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+	.leds		= centro_gpio_leds,
+	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device centro_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &centro_gpio_led_info,
+	}
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+/* TODO: add support for 324x324 */
+static struct pxafb_mode_info treo_lcd_modes[] = {
+{
+	.pixclock		= 86538,
+	.xres			= 320,
+	.yres			= 320,
+	.bpp			= 16,
+
+	.left_margin		= 20,
+	.right_margin		= 8,
+	.upper_margin		= 8,
+	.lower_margin		= 5,
+
+	.hsync_len		= 4,
+	.vsync_len		= 1,
+},
+};
+
+static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
+}
+
+static struct pxafb_mach_info treo_lcd_screen = {
+	.modes		= treo_lcd_modes,
+	.num_modes	= ARRAY_SIZE(treo_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+static void __init treo_pm_init(void)
+{
+	static u32 resume[] = {
+		0xe3a00101,	/* mov	r0,	#0x40000000 */
+		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
+		0xe590f008,	/* ldr	pc, [r0, #0x08] */
+	};
+
+	/* this is where the bootloader jumps */
+	memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
+}
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *treo_devices[] __initdata = {
+	&treo_backlight,
+	&power_supply,
+};
+
+#ifdef CONFIG_MACH_TREO680
+static struct platform_device *treo680_devices[] __initdata = {
+	&treo680_leds,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct platform_device *centro_devices[] __initdata = {
+	&centro_leds,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
+/* setup udc GPIOs initial state */
+static void __init treo_udc_init(void)
+{
+	if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_TREO_USB_PULLUP);
+	}
+}
+
+static void __init treo_lcd_power_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
+	if (ret) {
+		pr_err("Treo680: LCD power GPIO request failed!\n");
+		return;
+	}
+
+	ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
+	if (ret) {
+		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+		gpio_free(GPIO_NR_TREO_LCD_POWER);
+		return;
+	}
+
+	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
+}
+
+static void __init treo_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	treo_pm_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+	treo_lcd_power_init();
+	set_pxa_fb_info(&treo_lcd_screen);
+	treo_udc_init();
+	pxa_set_udc_info(&treo_udc_info);
+	pxa_set_ac97_info(&treo_ac97_pdata);
+	pxa_set_ficp_info(&treo_ficp_info);
+
+	platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+}
+
+#ifdef CONFIG_MACH_TREO680
+static void __init treo680_init(void)
+{
+	treo_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
+	pxa_set_mci_info(&treo680_mci_platform_data);
+	pxa_set_keypad_info(&treo680_keypad_platform_data);
+	pxa_set_ohci_info(&treo680_ohci_info);
+
+	platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
+}
+
+MACHINE_START(TREO680, "Palm Treo 680")
+	.phys_io        = TREO_PHYS_IO_START,
+	.io_pg_offst    = io_p2v(0x40000000),
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = treo680_init,
+MACHINE_END
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+	treo_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+	pxa_set_mci_info(&centro_mci_platform_data);
+
+	pxa_set_keypad_info(&centro_keypad_platform_data);
+
+	platform_add_devices(ARRAY_AND_SIZE(centro_devices));
+}
+
+MACHINE_START(CENTRO, "Palm Centro 685")
+	.phys_io        = TREO_PHYS_IO_START,
+	.io_pg_offst    = io_p2v(0x40000000),
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+       .init_machine   = centro_init,
+MACHINE_END
+#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 76a2b37..7bf18c2 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -570,6 +570,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c2bf493..d787ac7 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -491,6 +491,10 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	set_pxa_fb_info(&palmz72_lcd_screen);
 	pxa_set_mci_info(&palmz72_mci_platform_data);
 	palmz72_udc_init();
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 6abfa29..2190af0 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -227,6 +227,10 @@
 
 	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* at last call the baseboard to initialize itself */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index bbda570..d5255ae 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -359,19 +359,12 @@
 	GPIO44_CIF_LV,
 };
 
-static int pcm990_pxacamera_init(struct device *dev)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
-	return 0;
-}
-
 /*
  * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
  *	MCLK_EN:	Master clock is generated by PXA
  *	PCP:		Data sampled on the falling edge of pixel clock
  */
 struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
-	.init	= pcm990_pxacamera_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
 	.mclk_10khz = 1000,
@@ -532,6 +525,7 @@
 	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index a186994..e5eeb3a 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -449,6 +449,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_scoop_config = &poodle_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 77c2693..2c1b0b7 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,9 +322,6 @@
 
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
@@ -372,10 +369,8 @@
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255()) {
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clkreg, 1);
-		ret = platform_device_register(&pxa_device_hwuart);
-	}
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index ec68cc1..6a0b731 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -364,9 +364,6 @@
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 09b7b1a..fcb0721 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,6 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
+#include <mach/regs-intc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -45,6 +46,9 @@
 #define ACCR_D0CS	(1 << 26)
 #define ACCR_PCCE	(1 << 11)
 
+#define PECR_IE(n)	((1 << ((n) * 2)) << 28)
+#define PECR_IS(n)	((1 << ((n) * 2)) << 29)
+
 /* crystal frequency to static memory controller multiplier (SMCFS) */
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
 
@@ -237,6 +241,7 @@
 static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
 static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
@@ -261,6 +266,7 @@
 	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
 	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
@@ -530,6 +536,43 @@
 #define pxa3xx_set_wake	NULL
 #endif
 
+static void pxa_ack_ext_wakeup(unsigned int irq)
+{
+	PECR |= PECR_IS(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(unsigned int irq)
+{
+	ICMR2 &= ~(1 << ((irq - PXA_IRQ(0)) & 0x1f));
+	PECR &= ~PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(unsigned int irq)
+{
+	ICMR2 |= 1 << ((irq - PXA_IRQ(0)) & 0x1f);
+	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+	.name		= "WAKEUP",
+	.ack		= pxa_ack_ext_wakeup,
+	.mask		= pxa_mask_ext_wakeup,
+	.unmask		= pxa_unmask_ext_wakeup,
+};
+
+static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+{
+	int irq;
+
+	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+		set_irq_chip(irq, &pxa_ext_wakeup_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	pxa_ext_wakeup_chip.set_wake = fn;
+}
+
 void __init pxa3xx_init_irq(void)
 {
 	/* enable CP6 access */
@@ -539,6 +582,7 @@
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
 	pxa_init_irq(56, pxa3xx_set_wake);
+	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
@@ -553,9 +597,6 @@
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 8241a63..115b6f2 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -22,9 +22,13 @@
 #include <linux/i2c.h>
 #include <linux/smc91x.h>
 #include <linux/mfd/da903x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 
 #include <mach/pxa930.h>
 #include <plat/i2c.h>
@@ -33,7 +37,7 @@
 #include "devices.h"
 #include "generic.h"
 
-#define GPIO_LCD_RESET	(16)
+#define GPIO_LCD_RESET		(16)
 
 /* SAAR MFP configurations */
 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
@@ -56,6 +60,31 @@
 	/* Ethernet */
 	DF_nCS1_nCS3,
 	GPIO97_GPIO,
+
+	/* DFI */
+	DF_INT_RnB_ND_INT_RnB,
+	DF_nRE_nOE_ND_nRE,
+	DF_nWE_ND_nWE,
+	DF_CLE_nOE_ND_CLE,
+	DF_nADV1_ALE_ND_ALE,
+	DF_nADV2_ALE_nCS3,
+	DF_nCS0_ND_nCS0,
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
 };
 
 #define SAAR_ETH_PHYS	(0x14000000)
@@ -451,10 +480,15 @@
 #endif
 
 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da9034_backlight_pdata saar_da9034_backlight = {
+	.output_current	= 4,	/* 4mA */
+};
+
 static struct da903x_subdev_info saar_da9034_subdevs[] = {
 	[0] = {
 		.name		= "da903x-backlight",
 		.id		= DA9034_ID_WLED,
+		.platform_data	= &saar_da9034_backlight,
 	},
 };
 
@@ -480,12 +514,81 @@
 #else
 static inline void saar_init_i2c(void) {}
 #endif
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition saar_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data saar_onenand_info = {
+	.parts		= saar_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
+};
+
+#define SMC_CS0_PHYS_BASE	(0x10000000)
+
+static struct resource saar_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device saar_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &saar_onenand_info,
+	},
+	.resource	= saar_resource_onenand,
+	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
+};
+
+static void __init saar_init_onenand(void)
+{
+	platform_device_register(&saar_device_onenand);
+}
+#else
+static void __init saar_init_onenand(void) {}
+#endif
+
 static void __init saar_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_device_register(&smc91x_device);
+	saar_init_onenand();
 
 	saar_init_i2c();
 	saar_init_lcd();
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 55259f4..1439785 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -42,8 +42,8 @@
 #define MAX1111_BATT_TEMP   2u
 #define MAX1111_ACIN_VOLT   6u
 
-extern struct battery_thresh spitz_battery_levels_acin[];
-extern struct battery_thresh spitz_battery_levels_noac[];
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 629e05d..67229a1 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -78,7 +78,7 @@
 
 
 
-struct battery_thresh spitz_battery_levels_acin[] = {
+struct battery_thresh sharpsl_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
 	{ 211,  95},
@@ -121,7 +121,7 @@
 	{   0,   0},
 };
 
-struct battery_thresh  spitz_battery_levels_noac[] = {
+struct battery_thresh sharpsl_battery_levels_noac[] = {
 	{ 213, 100},
 	{ 212,  98},
 	{ 211,  95},
@@ -165,19 +165,20 @@
 };
 
 /* MAX1111 Commands */
-#define MAXCTRL_PD0      1u << 0
-#define MAXCTRL_PD1      1u << 1
-#define MAXCTRL_SGL      1u << 2
-#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_PD0      (1u << 0)
+#define MAXCTRL_PD1      (1u << 1)
+#define MAXCTRL_SGL      (1u << 2)
+#define MAXCTRL_UNI      (1u << 3)
 #define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      1u << 7
+#define MAXCTRL_STR      (1u << 7)
 
 /*
  * Read MAX1111 ADC
  */
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
-	if (machine_is_tosa()) // Ugly, better move this function into another module
+	/* Ugly, better move this function into another module */
+	if (machine_is_tosa())
 	    return 0;
 
 #ifdef CONFIG_CORGI_SSP_DEPRECATED
@@ -238,7 +239,7 @@
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
-	int voltage, percent, apm_status, i = 0;
+	int voltage, percent, apm_status, i;
 
 	if (!sharpsl_pm.machinfo)
 		return;
@@ -250,15 +251,14 @@
 			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
 		schedule_delayed_work(&toggle_charger, 0);
 
-	while(1) {
+	for (i = 0; i < 5; i++) {
 		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+		if (voltage > 0)
 			break;
-		}
+	}
+	if (voltage <= 0) {
+		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
 	}
 
 	voltage = sharpsl_average_value(voltage);
@@ -266,8 +266,10 @@
 	percent = get_percentage(voltage);
 
 	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+	   creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
+	    || (apm_status == APM_BATTERY_STATUS_HIGH)
+	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
 		sharpsl_pm.battstat.mainbat_voltage = voltage;
 		sharpsl_pm.battstat.mainbat_status = apm_status;
 		sharpsl_pm.battstat.mainbat_percent = percent;
@@ -279,8 +281,8 @@
 #ifdef CONFIG_BACKLIGHT_CORGI
 	/* If battery is low. limit backlight intensity to save power. */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+	    && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
+	    || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
 		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
 			sharpsl_pm.machinfo->backlight_limit(1);
 			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
@@ -293,8 +295,8 @@
 
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
 		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 		dev_err(sharpsl_pm.dev, "Fatal Off\n");
 		apm_queue_event(APM_CRITICAL_SUSPEND);
@@ -346,7 +348,7 @@
 
 static void sharpsl_charge_toggle(struct work_struct *private_)
 {
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
 
 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 		sharpsl_charge_off();
@@ -368,7 +370,7 @@
 {
 	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
 
 	sharpsl_average_clear();
 	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
@@ -472,14 +474,14 @@
 	sharpsl_ad[sharpsl_ad_index] = ad;
 	sharpsl_ad_index++;
 	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
 			sharpsl_ad[i] = sharpsl_ad[i+1];
 		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
 	}
-	for (i=0; i < sharpsl_ad_index; i++)
+	for (i = 0; i < sharpsl_ad_index; i++)
 		ad_val += sharpsl_ad[i];
 
-	return (ad_val / sharpsl_ad_index);
+	return ad_val / sharpsl_ad_index;
 }
 
 /*
@@ -492,8 +494,8 @@
 
 	/* Find MAX val */
 	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
+	j = 0;
+	for (i = 1; i < 5; i++) {
 		if (temp < val[i]) {
 			temp = val[i];
 			j = i;
@@ -502,21 +504,21 @@
 
 	/* Find MIN val */
 	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
+	k = 4;
+	for (i = 3; i >= 0; i--) {
 		if (temp > val[i]) {
 			temp = val[i];
 			k = i;
 		}
 	}
 
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
+	for (i = 0; i < 5; i++)
+		if (i != j && i != k)
 			sum += val[i];
 
 	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
 
-	return (sum/3);
+	return sum/3;
 }
 
 static int sharpsl_check_battery_temp(void)
@@ -524,7 +526,7 @@
 	int val, i, buff[5];
 
 	/* Check battery temperature */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 		sharpsl_pm.machinfo->measure_temp(1);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
@@ -557,7 +559,7 @@
 		sharpsl_pm.machinfo->discharge1(1);
 
 	/* Check battery voltage */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 	}
@@ -581,16 +583,16 @@
 {
 	int temp, i, buff[5];
 
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
 	}
 
 	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
 
 	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
 		return -1;
 	}
 
@@ -624,9 +626,9 @@
 
 static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 {
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
 
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
 	/* not charging and AC-IN! */
 
 	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
@@ -644,12 +646,12 @@
 	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
 		RTSR &= RTSR_ALE;
 		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
 		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
 	} else if (alarm_enable) {
 		RTSR &= RTSR_ALE;
 		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
 	} else {
 		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
 	}
@@ -658,19 +660,18 @@
 
 	sharpsl_pm.machinfo->postsuspend();
 
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
 }
 
 static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 {
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
 		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
 			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
 			corgi_goto_sleep(alarm_time, alarm_enable, state);
 			return 1;
 		}
-		if(sharpsl_off_charge_battery()) {
+		if (sharpsl_off_charge_battery()) {
 			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
 			corgi_goto_sleep(alarm_time, alarm_enable, state);
 			return 1;
@@ -697,7 +698,7 @@
 
 	corgi_goto_sleep(alarm_time, alarm_status, state);
 
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+	while (corgi_enter_suspend(alarm_time, alarm_status, state))
 		{}
 
 	if (sharpsl_pm.machinfo->earlyresume)
@@ -732,7 +733,7 @@
 		sharpsl_pm.machinfo->discharge1(1);
 
 	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 	}
@@ -812,7 +813,7 @@
 		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 
 		time = RCNR;
-		while(1) {
+		while (1) {
 			/* Check if any wakeup event had occurred */
 			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 				return 0;
@@ -835,9 +836,9 @@
 	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 
 	time = RCNR;
-	while(1) {
+	while (1) {
 		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+		if (sharpsl_pm.machinfo->charger_wakeup())
 			return 0;
 		/* Check for timeout */
 		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
@@ -864,12 +865,12 @@
 
 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
 }
 
 static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
 }
 
 static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
@@ -943,8 +944,7 @@
 		}
 	}
 
-	if (sharpsl_pm.machinfo->batfull_irq)
-	{
+	if (sharpsl_pm.machinfo->batfull_irq) {
 		/* Register interrupt handler. */
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 3da45d0..4b50f14 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -768,6 +768,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
@@ -802,10 +806,12 @@
 {
 	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
 
+#ifdef CONFIG_MACH_BORZOI
 	if (machine_is_borzoi()) {
 		sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
 		sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
 	}
+#endif
 
 	platform_scoop_config = &spitz_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 724ffb0..fc5a70c 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -103,7 +103,7 @@
 	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
 	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
 	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PKSR = 0xffffffff; // clear
+	PKSR = 0xffffffff; /* clear */
 
 	/* nRESET_OUT Disable */
 	PSLR |= PSLR_SL_ROD;
@@ -149,7 +149,7 @@
 	if (resume_on_alarm && (PEDR & PWER_RTC))
 		is_resume |= PWER_RTC;
 
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
 	return is_resume;
 }
 
@@ -160,7 +160,7 @@
 
 unsigned long spitzpm_read_devdata(int type)
 {
-	switch(type) {
+	switch (type) {
 	case SHARPSL_STATUS_ACIN:
 		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
@@ -199,7 +199,7 @@
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
 #elif defined(CONFIG_BACKLIGHT_CORGI)
-        .backlight_limit  = corgibl_limit_intensity,
+	.backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
@@ -208,8 +208,8 @@
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
@@ -241,7 +241,7 @@
 
 static void spitzpm_exit(void)
 {
- 	platform_device_unregister(spitzpm_device);
+	platform_device_unregister(spitzpm_device);
 }
 
 module_init(spitzpm_init);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 965e38c..9ebe658 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -342,8 +342,9 @@
 }
 EXPORT_SYMBOL(ssp_free);
 
-static int __devinit ssp_probe(struct platform_device *pdev, int type)
+static int __devinit ssp_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct resource *res;
 	struct ssp_device *ssp;
 	int ret = 0;
@@ -413,7 +414,7 @@
 	 */
 	ssp->port_id = pdev->id + 1;
 	ssp->use_count = 0;
-	ssp->type = type;
+	ssp->type = (int)id->driver_data;
 
 	mutex_lock(&ssp_lock);
 	list_add(&ssp->node, &ssp_list);
@@ -457,75 +458,31 @@
 	return 0;
 }
 
-static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA25x_SSP);
-}
-
-static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA25x_NSSP);
-}
-
-static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA27x_SSP);
-}
-
-static struct platform_driver pxa25x_ssp_driver = {
-	.driver		= {
-		.name	= "pxa25x-ssp",
-	},
-	.probe		= pxa25x_ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ },
 };
 
-static struct platform_driver pxa25x_nssp_driver = {
-	.driver		= {
-		.name	= "pxa25x-nssp",
-	},
-	.probe		= pxa25x_nssp_probe,
+static struct platform_driver ssp_driver = {
+	.probe		= ssp_probe,
 	.remove		= __devexit_p(ssp_remove),
-};
-
-static struct platform_driver pxa27x_ssp_driver = {
 	.driver		= {
-		.name	= "pxa27x-ssp",
+		.owner	= THIS_MODULE,
+		.name	= "pxa2xx-ssp",
 	},
-	.probe		= pxa27x_ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
+	.id_table	= ssp_id_table,
 };
 
 static int __init pxa_ssp_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_ssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_ssp_driver");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa25x_nssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_nssp_driver");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_ssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_ssp_driver");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&ssp_driver);
 }
 
 static void __exit pxa_ssp_exit(void)
 {
-	platform_driver_unregister(&pxa25x_ssp_driver);
-	platform_driver_unregister(&pxa25x_nssp_driver);
-	platform_driver_unregister(&pxa27x_ssp_driver);
+	platform_driver_unregister(&ssp_driver);
 }
 
 arch_initcall(pxa_ssp_init);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3b205b6..a98a434f 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -760,6 +760,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* spi chip selects */
 	gpio_direction_output(37, 0);
 	gpio_direction_output(24, 0);
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index b75353a..f02dcb5 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -477,6 +477,10 @@
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_device_register(&smc91x_device);
 
 	tavorevb_init_lcd();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e81a526..c854c16 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -825,6 +825,11 @@
 	int dummy;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
deleted file mode 100644
index fe08507..0000000
--- a/arch/arm/mach-pxa/treo680.c
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * Hardware definitions for Palm Treo 680
- *
- * Author:     Tomas Cech <sleep_walker@suse.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * (find more info at www.hackndev.com)
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/pda_power.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
-#include <linux/power_supply.h>
-#include <linux/sysdev.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/audio.h>
-#include <mach/treo680.h>
-#include <mach/mmc.h>
-#include <mach/pxafb.h>
-#include <mach/irda.h>
-#include <mach/pxa27x_keypad.h>
-#include <mach/udc.h>
-#include <mach/ohci.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/palmasoc.h>
-#include <mach/camera.h>
-
-#include <sound/pxa2xx-lib.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static unsigned long treo680_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO33_GPIO,				/* SD read only */
-	GPIO113_GPIO,				/* SD detect */
-
-	/* AC97 */
-	GPIO28_AC97_BITCLK,
-	GPIO29_AC97_SDATA_IN_0,
-	GPIO30_AC97_SDATA_OUT,
-	GPIO31_AC97_SYNC,
-	GPIO89_AC97_SYSCLK,
-	GPIO95_AC97_nRESET,
-
-	/* IrDA */
-	GPIO46_FICP_RXD,
-	GPIO47_FICP_TXD,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* USB */
-	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
-
-	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
-	GPIO101_KP_MKIN_1,
-	GPIO102_KP_MKIN_2,
-	GPIO97_KP_MKIN_3,
-	GPIO98_KP_MKIN_4,
-	GPIO99_KP_MKIN_5,
-	GPIO91_KP_MKIN_6,
-	GPIO13_KP_MKIN_7,
-	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
-	GPIO104_KP_MKOUT_1,
-	GPIO105_KP_MKOUT_2,
-	GPIO106_KP_MKOUT_3,
-	GPIO107_KP_MKOUT_4,
-	GPIO108_KP_MKOUT_5,
-	GPIO96_KP_MKOUT_6,
-	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,	/* Hotsync button */
-
-	/* LCD */
-	GPIO58_LCD_LDD_0,
-	GPIO59_LCD_LDD_1,
-	GPIO60_LCD_LDD_2,
-	GPIO61_LCD_LDD_3,
-	GPIO62_LCD_LDD_4,
-	GPIO63_LCD_LDD_5,
-	GPIO64_LCD_LDD_6,
-	GPIO65_LCD_LDD_7,
-	GPIO66_LCD_LDD_8,
-	GPIO67_LCD_LDD_9,
-	GPIO68_LCD_LDD_10,
-	GPIO69_LCD_LDD_11,
-	GPIO70_LCD_LDD_12,
-	GPIO71_LCD_LDD_13,
-	GPIO72_LCD_LDD_14,
-	GPIO73_LCD_LDD_15,
-	GPIO74_LCD_FCLK,
-	GPIO75_LCD_LCLK,
-	GPIO76_LCD_PCLK,
-
-	/* Quick Capture Interface */
-	GPIO84_CIF_FV,
-	GPIO85_CIF_LV,
-	GPIO53_CIF_MCLK,
-	GPIO54_CIF_PCLK,
-	GPIO81_CIF_DD_0,
-	GPIO55_CIF_DD_1,
-	GPIO51_CIF_DD_2,
-	GPIO50_CIF_DD_3,
-	GPIO52_CIF_DD_4,
-	GPIO48_CIF_DD_5,
-	GPIO17_CIF_DD_6,
-	GPIO12_CIF_DD_7,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* GSM */
-	GPIO14_GPIO | WAKEUP_ON_EDGE_BOTH,	/* GSM host wake up */
-	GPIO34_FFUART_RXD,
-	GPIO35_FFUART_CTS,
-	GPIO39_FFUART_TXD,
-	GPIO41_FFUART_RTS,
-
-	/* MISC. */
-	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* external power detect */
-	GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,	/* silent switch */
-	GPIO116_GPIO,				/* headphone detect */
-	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
-};
-
-/******************************************************************************
- * SD/MMC card controller
- ******************************************************************************/
-static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
-	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
-	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
-};
-
-/******************************************************************************
- * GPIO keyboard
- ******************************************************************************/
-static unsigned int treo680_matrix_keys[] = {
-	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
-	KEY(0, 1, KEY_LEFT),
-	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
-	KEY(0, 3, KEY_L),
-	KEY(0, 4, KEY_A),
-	KEY(0, 5, KEY_Q),
-	KEY(0, 6, KEY_P),
-
-	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
-	KEY(1, 1, KEY_RIGHT),
-	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
-	KEY(1, 3, KEY_Z),
-	KEY(1, 4, KEY_S),
-	KEY(1, 5, KEY_W),
-
-	KEY(2, 0, KEY_F1),		/* Phone */
-	KEY(2, 1, KEY_UP),
-	KEY(2, 2, KEY_0),
-	KEY(2, 3, KEY_X),
-	KEY(2, 4, KEY_D),
-	KEY(2, 5, KEY_E),
-
-	KEY(3, 0, KEY_F10),		/* Calendar */
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_SPACE),
-	KEY(3, 3, KEY_C),
-	KEY(3, 4, KEY_F),
-	KEY(3, 5, KEY_R),
-
-	KEY(4, 0, KEY_F12),		/* Mail */
-	KEY(4, 1, KEY_KPENTER),
-	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
-	KEY(4, 3, KEY_V),
-	KEY(4, 4, KEY_G),
-	KEY(4, 5, KEY_T),
-
-	KEY(5, 0, KEY_F9),		/* Home */
-	KEY(5, 1, KEY_PAGEUP),		/* Side up */
-	KEY(5, 2, KEY_DOT),
-	KEY(5, 3, KEY_B),
-	KEY(5, 4, KEY_H),
-	KEY(5, 5, KEY_Y),
-
-	KEY(6, 0, KEY_TAB),		/* Side Activate */
-	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
-	KEY(6, 2, KEY_ENTER),
-	KEY(6, 3, KEY_N),
-	KEY(6, 4, KEY_J),
-	KEY(6, 5, KEY_U),
-
-	KEY(7, 0, KEY_F6),		/* Green/Call */
-	KEY(7, 1, KEY_O),
-	KEY(7, 2, KEY_BACKSPACE),
-	KEY(7, 3, KEY_M),
-	KEY(7, 4, KEY_K),
-	KEY(7, 5, KEY_I),
-};
-
-static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
-	.matrix_key_rows	= 8,
-	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
-	.direct_key_map		= { KEY_CONNECT },
-	.direct_key_num		= 1,
-
-	.debounce_interval	= 30,
-};
-
-/******************************************************************************
- * aSoC audio
- ******************************************************************************/
-
-static pxa2xx_audio_ops_t treo680_ac97_pdata = {
-	.reset_gpio	= 95,
-};
-
-/******************************************************************************
- * Backlight
- ******************************************************************************/
-static int treo680_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_TREO680_BL_POWER);
-err:
-	return ret;
-}
-
-static int treo680_backlight_notify(int brightness)
-{
-	gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
-	return TREO680_MAX_INTENSITY - brightness;
-};
-
-static void treo680_backlight_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO680_BL_POWER);
-}
-
-static struct platform_pwm_backlight_data treo680_backlight_data = {
-	.pwm_id		= 0,
-	.max_brightness	= TREO680_MAX_INTENSITY,
-	.dft_brightness	= TREO680_DEFAULT_INTENSITY,
-	.pwm_period_ns	= TREO680_PERIOD_NS,
-	.init		= treo680_backlight_init,
-	.notify		= treo680_backlight_notify,
-	.exit		= treo680_backlight_exit,
-};
-
-static struct platform_device treo680_backlight = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &treo680_backlight_data,
-	},
-};
-
-/******************************************************************************
- * IrDA
- ******************************************************************************/
-static struct pxaficp_platform_data treo680_ficp_info = {
-	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
-	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-};
-
-/******************************************************************************
- * UDC
- ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
-	.gpio_vbus		= GPIO_NR_TREO680_USB_DETECT,
-	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_TREO680_USB_PULLUP,
-};
-
-
-/******************************************************************************
- * USB host
- ******************************************************************************/
-static struct pxaohci_platform_data treo680_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
-	.power_budget = 0,
-};
-
-/******************************************************************************
- * Power supply
- ******************************************************************************/
-static int power_supply_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
-	if (ret)
-		goto err1;
-	ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
-	if (ret)
-		goto err2;
-
-	return 0;
-
-err2:
-	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
-err1:
-	return ret;
-}
-
-static int treo680_is_ac_online(void)
-{
-	return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
-}
-
-static void power_supply_exit(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
-}
-
-static char *treo680_supplicants[] = {
-	"main-battery",
-};
-
-static struct pda_power_pdata power_supply_info = {
-	.init		 = power_supply_init,
-	.is_ac_online    = treo680_is_ac_online,
-	.exit		 = power_supply_exit,
-	.supplied_to     = treo680_supplicants,
-	.num_supplicants = ARRAY_SIZE(treo680_supplicants),
-};
-
-static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-};
-
-/******************************************************************************
- * Vibra and LEDs
- ******************************************************************************/
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "treo680:vibra:vibra",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_VIBRATE_EN,
-	},
-	{
-		.name			= "treo680:green:led",
-		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO680_GREEN_LED,
-	},
-	{
-		.name			= "treo680:keybbl:keybbl",
-		.default_trigger	= "none",
-		.gpio			= GPIO_NR_TREO680_KEYB_BL,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device treo680_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &gpio_led_info,
-	}
-};
-
-
-/******************************************************************************
- * Framebuffer
- ******************************************************************************/
-/* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo680_lcd_modes[] = {
-{
-	.pixclock		= 86538,
-	.xres			= 320,
-	.yres			= 320,
-	.bpp			= 16,
-
-	.left_margin		= 20,
-	.right_margin		= 8,
-	.upper_margin		= 8,
-	.lower_margin		= 5,
-
-	.hsync_len		= 4,
-	.vsync_len		= 1,
-},
-};
-
-static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
-{
-	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
-}
-
-static struct pxafb_mach_info treo680_lcd_screen = {
-	.modes		= treo680_lcd_modes,
-	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-};
-
-/******************************************************************************
- * Power management - standby
- ******************************************************************************/
-static void __init treo680_pm_init(void)
-{
-	static u32 resume[] = {
-		0xe3a00101,	/* mov	r0,	#0x40000000 */
-		0xe380060f,	/* orr	r0, r0, #0x00f00000 */
-		0xe590f008,	/* ldr	pc, [r0, #0x08] */
-	};
-
-	/* this is where the bootloader jumps */
-	memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
-}
-
-/******************************************************************************
- * Machine init
- ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&treo680_backlight,
-	&treo680_leds,
-	&power_supply,
-};
-
-/* setup udc GPIOs initial state */
-static void __init treo680_udc_init(void)
-{
-	if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_TREO680_USB_PULLUP);
-	}
-}
-
-static void __init treo680_lcd_power_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
-	if (ret) {
-		pr_err("Treo680: LCD power GPIO request failed!\n");
-		return;
-	}
-
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
-	if (ret) {
-		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
-		gpio_free(GPIO_NR_TREO680_LCD_POWER);
-		return;
-	}
-
-	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
-}
-
-static void __init treo680_init(void)
-{
-	treo680_pm_init();
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	pxa_set_keypad_info(&treo680_keypad_platform_data);
-	treo680_lcd_power_init();
-	set_pxa_fb_info(&treo680_lcd_screen);
-	pxa_set_mci_info(&treo680_mci_platform_data);
-	treo680_udc_init();
-	pxa_set_udc_info(&treo680_udc_info);
-	pxa_set_ac97_info(&treo680_ac97_pdata);
-	pxa_set_ficp_info(&treo680_ficp_info);
-	pxa_set_ohci_info(&treo680_ohci_info);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(TREO680, "Palm Treo 680")
-	.phys_io	= TREO680_PHYS_IO_START,
-	.io_pg_offst	= io_p2v(0x40000000),
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= treo680_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3981e03..0aa858e 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -524,6 +524,10 @@
 					ARRAY_SIZE(trizeps4_devices));
 	}
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	if (0)	/* dont know how to determine LCD */
 		set_pxa_fb_info(&sharp_lcd);
 	else
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232..cf0d71b 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -301,15 +301,6 @@
 	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
 				viper_irq_handler);
 	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
-	/*
-	 * 8250 doesn't support IRQ_TYPE being passed as part
-	 * of the plat_serial8250_port structure...
-	 */
-	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
 }
 
 /* Flat Panel */
@@ -539,6 +530,7 @@
 	{
 		.mapbase	= VIPER_UARTA_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -548,6 +540,7 @@
 	{
 		.mapbase	= VIPER_UARTB_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -908,6 +901,10 @@
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* Wake-up serial console */
 	viper_init_serial_gpio();
 
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3fd79cb..d3b4e3f 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -165,6 +165,11 @@
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	/* See Intel XScale Developer's Guide for details */
 	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
 	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 09784d3..b66e9e2 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -31,7 +31,7 @@
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -444,6 +444,10 @@
 
 static void __init zylonite_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* board-processor specific initialization */
 	zylonite_pxa300_init();
 	zylonite_pxa320_init();
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1535540..3fd8892 100644
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2400/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da..dd1fcc7 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -81,6 +81,14 @@
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
 	bool
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4..0d468e9 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 9a37c87..217b102 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@
 	unsigned int i;
 
 	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
 
 		/* zap all the IRQs */
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d11868..75189df 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf11..b7d1f8d 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
@@ -24,21 +25,10 @@
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
 	if (on) {
-#ifdef CONFIG_LEDS_H1940
-		/* flashing Blue */
-		led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
 		/* Power on the chip */
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
@@ -46,48 +36,31 @@
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-		state = 1;
 	}
 	else {
-#ifdef CONFIG_LEDS_H1940
-		led_trigger_event(bt_led_trigger, 0);
-#endif
-
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		state = 0;
 	}
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", state);
+	h1940bt_enable(!blocked);
+	return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int new_state;
-	char *endp;
-
-	new_state = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
-		return -EINVAL;
-
-	h1940bt_enable(new_state);
-
-	return count;
-}
-static DEVICE_ATTR(enable, 0644,
-		h1940bt_show,
-		h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+	struct rfkill *rfk;
+	int ret = 0;
+
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@
 	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-	/* disable BT by default */
-	h1940bt_enable(0);
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
 
-	return device_create_file(&pdev->dev, &dev_attr_enable);
+	rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
+
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_unregister_simple(bt_led_trigger);
-#endif
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 20493b0..bee2a7a 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * BAST - CPLD control constants
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 501c202b..cac428c 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index c2c5baf..6e7dc9d 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - Memory map definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 61684cb..4c38b39 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687..08ac5f9 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff1..035a493 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index 639eff5..17380f8 100644
--- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 2a5d90e..9a0d169 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index f6e8eec..ebc85c6 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 2d36353..4932b87 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c943210..72f756c 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index f53f85b..47add13 100644
--- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine VR1000 - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 647c9ad..4c79ac8 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -273,7 +274,7 @@
  * socket.
 */
 
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 	[0] = {
 		.name		= "SmartMedia",
 		.nr_chips	= 1,
@@ -323,7 +324,7 @@
 	__raw_writeb(tmp, BAST_VA_CTRL2);
 }
 
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.tacls		= 30,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -608,6 +609,11 @@
 	.need_io	= 1,
 };
 
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -625,7 +631,6 @@
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_nand.dev.platform_data = &bast_nand_info;
 	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +644,7 @@
 	sysdev_register(&bast_pm_sysdev);
 
 	s3c_i2c0_set_platdata(&bast_i2c_info);
+	s3c_nand_set_platdata(&bast_nand_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
@@ -647,6 +653,7 @@
 
 	usb_simtec_init();
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, &bast_audio);
 
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index d9cd5dd..4905325 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -21,6 +21,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +37,12 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
@@ -46,6 +54,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/mci.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -171,16 +180,90 @@
 	.gpdup_mask=	0xffffffff,
 };
 
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
 	.name             = "h1940-leds",
 	.id               = -1,
 };
 
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
 	.name             = "h1940-bt",
 	.id               = -1,
 };
 
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+	.gpio_detect   = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power     = NULL,
+	.ocr_avail     = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+	gpio_request(S3C2410_GPB(0), "Backlight");
+
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+	return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	/* tcnt = 0x31 */
+	.pwm_period_ns  = 36296,
+	.init           = h1940_backlight_init,
+	.exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	int value;
+
+	if (!power) {
+		/* set to 3ec */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		/* wait for 3ac */
+		do {
+			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+		} while (value);
+		/* set to 38c */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+	} else {
+		/* Set to 3ac */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		/* Set to 3ad */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+	}
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+	.set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+	.name                   = "platform-lcd",
+	.dev.parent             = &s3c_device_lcd.dev,
+	.dev.platform_data      = &h1940_lcd_power_data,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_lcd,
@@ -188,8 +271,13 @@
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
-	&s3c_device_leds,
-	&s3c_device_bluetooth,
+	&h1940_device_leds,
+	&h1940_device_bluetooth,
+	&s3c_device_sdi,
+	&s3c_device_rtc,
+	&s3c_device_timer[0],
+	&h1940_backlight,
+	&h1940_lcd_powerdev,
 };
 
 static void __init h1940_map_io(void)
@@ -219,6 +307,8 @@
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
@@ -231,6 +321,11 @@
 	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
+	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(5), "LCD power");
+	gpio_request(S3C2410_GPC(6), "LCD power");
+
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0f6ed61..0405712 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -338,7 +338,7 @@
 	&n35_button_device,
 };
 
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.frequency	= 10*1000,
@@ -500,8 +500,8 @@
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 2cc9849..ab092bc 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -258,7 +258,7 @@
 	&qt2410_led,
 };
 
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
 		.size	= 0x30000,
@@ -286,7 +286,7 @@
 	},
 };
 
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -299,7 +299,7 @@
  * chips and beyond.
  */
 
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -331,7 +331,7 @@
 
 static void __init qt2410_machine_init(void)
 {
-	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+	s3c_nand_set_platdata(&qt2410_nand_info);
 
 	switch (tft_type) {
 	case 'p': /* production */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1628cc7..0d61fb5 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -393,6 +394,7 @@
 				ARRAY_SIZE(vr1000_i2c_devs));
 
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, NULL);
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index f178c2f..8338865 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/pll.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 50e25fc..6b9d0d8 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@
 {
 	int ret;
 
-	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
 
 	ret = gpio_request(S3C2410_GPB(4), "USB power control");
 	if (ret < 0) {
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8df506e..c9fa3fc 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -96,7 +96,7 @@
  * 0x017d0000-0x02bd0000 : cramfs B
  * 0x02bd0000-0x03fd0000 : yaffs
  */
-static struct mtd_partition jive_imageA_nand_part[] = {
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -154,7 +154,7 @@
         },
 };
 
-static struct mtd_partition jive_imageB_nand_part[] = {
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -213,7 +213,7 @@
         },
 };
 
-static struct s3c2410_nand_set jive_nand_sets[] = {
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 	[0] = {
 		.name           = "flash",
 		.nr_chips       = 1,
@@ -222,7 +222,7 @@
 	},
 };
 
-static struct s3c2410_platform_nand jive_nand_info = {
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	/* set taken from osiris nand timings, possibly still conservative */
 	.tacls		= 30,
 	.twrph0		= 55,
@@ -631,7 +631,8 @@
 
 	s3c_pm_init();
 
-	s3c_device_nand.dev.platform_data = &jive_nand_info;
+	/** TODO - check that this is after the cmdline option! */
+	s3c_nand_set_platdata(&jive_nand_info);
 
 	/* initialise the spi */
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 11e8ad4..a6ba591 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -76,7 +76,7 @@
 	}
 };
 
-static struct mtd_partition vstms_nand_part[] = {
+static struct mtd_partition __initdata vstms_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= 0x7C000,
@@ -99,7 +99,7 @@
 	},
 };
 
-static struct s3c2410_nand_set vstms_nand_sets[] = {
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -112,7 +112,7 @@
  * chips and beyond.
 */
 
-static struct s3c2410_platform_nand vstms_nand_info = {
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -143,8 +143,6 @@
 
 static void __init vstms_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
@@ -153,6 +151,8 @@
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&vstms_nand_info);
+
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a8b69d7..cf10e14 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -53,6 +53,19 @@
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
 
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index bfadcf6..5f32245 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,3 +23,7 @@
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+
+# extra machine support
+
+obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 63c5ab65..0c049b9 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 68f3870..62a4c3e 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -53,8 +53,9 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio-simtec.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
@@ -138,7 +139,7 @@
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -161,7 +162,7 @@
 	}
 };
 
-static struct mtd_partition anubis_default_nand_part_large[] = {
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -191,7 +192,7 @@
  * socket.
 */
 
-static struct s3c2410_nand_set anubis_nand_sets[] = {
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -233,7 +234,7 @@
 	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
 }
 
-static struct s3c2410_platform_nand anubis_nand_info = {
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -437,6 +438,17 @@
 	}
 };
 
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -454,8 +466,6 @@
 
 	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
 
-	s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
@@ -476,6 +486,9 @@
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index dfc70109..aa69290 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -96,7 +96,7 @@
 
 /* NAND Flash on AT2440EVB board */
 
-static struct mtd_partition at2440evb_default_nand_part[] = {
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_256K,
@@ -114,7 +114,7 @@
 	},
 };
 
-static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
 	[0] = {
 		.name		= "nand",
 		.nr_chips	= 1,
@@ -123,7 +123,7 @@
 	},
 };
 
-static struct s3c2410_platform_nand at2440evb_nand_info = {
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -216,8 +216,6 @@
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
-	s3c_device_sdi.name = "s3c2440-sdi";
 	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
@@ -228,6 +226,7 @@
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 1c3382f..547d4fc 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -532,7 +532,6 @@
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 
-	s3c_device_nand.dev.platform_data = &mini2440_nand_info;
 	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
@@ -677,8 +676,11 @@
 		printk("\n");
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
+
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
new file mode 100644
index 0000000..ad2792d
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+	unsigned vregs1 = 0, vdcdc2 = 0;
+
+	if (!on) {
+		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
+	}
+
+	dvs_en = on;
+	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+	tps65010_config_vregs1(vregs1);
+	tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+	/* at the moment, we assume ARMCLK = HCLK => DVS */
+	return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+			      unsigned long val, void *data)
+{
+	struct cpufreq_freqs *cf = data;
+	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+	bool old_dvs = is_dvs(&freqs->old);
+	bool new_dvs = is_dvs(&freqs->new);
+	int ret = 0;
+
+	if (!dvs_en)
+		return 0;
+
+	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+	       freqs->old.armclk, freqs->old.hclk,
+	       freqs->new.armclk, freqs->new.hclk);
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (old_dvs & !new_dvs ||
+		    cur_dvs & !new_dvs) {
+			pr_debug("%s: exiting dvs\n", __func__);
+			cur_dvs = false;
+			gpio_set_value(OSIRIS_GPIO_DVS, 1);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (!old_dvs & new_dvs ||
+		    !cur_dvs & new_dvs) {
+			pr_debug("entering dvs\n");
+			cur_dvs = true;
+			gpio_set_value(OSIRIS_GPIO_DVS, 0);
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+	.notifier_call	= osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "initialising\n");
+
+	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot claim gpio\n");
+		goto err_nogpio;
+	}
+
+	/* start with dvs disabled */
+	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+	ret = cpufreq_register_notifier(&osiris_dvs_nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register with cpufreq\n");
+		goto err_nofreq;
+	}
+
+	osiris_dvs_tps_setdvs(true);
+
+	return 0;
+
+err_nofreq:
+	gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+	return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "exiting\n");
+
+	/* disable any current dvs */
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+
+	cpufreq_unregister_notifier(&osiris_dvs_nb,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	gpio_free(OSIRIS_GPIO_DVS);
+
+	return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+	cur_dvs = false;
+
+	return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+	osiris_dvs_tps_setdvs(true);
+	return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+	.suspend	= osiris_dvs_suspend,
+	.resume		= osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+	.probe		= osiris_dvs_probe,
+	.remove		= __devexit_p(osiris_dvs_remove),
+	.driver		= {
+		.name	= "osiris-dvs",
+		.owner	= THIS_MODULE,
+		.pm	= &osiris_dvs_pm,
+	},
+};
+
+static int __init osiris_dvs_init(void)
+{
+	return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+	platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 2105a41..015dfb2 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -23,6 +23,8 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 
+#include <linux/i2c/tps65010.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -148,7 +150,7 @@
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition osiris_default_nand_part[] = {
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -171,7 +173,7 @@
 	}
 };
 
-static struct mtd_partition osiris_default_nand_part_large[] = {
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -201,7 +203,7 @@
  * socket.
 */
 
-static struct s3c2410_nand_set osiris_nand_sets[] = {
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -243,7 +245,7 @@
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 }
 
-static struct s3c2410_platform_nand osiris_nand_info = {
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -326,12 +328,44 @@
 	.cls		= &osiris_pm_sysclass,
 };
 
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+	/* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+	.name	= "osiris-dvs",
+	.id	= -1,
+	.dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+	osiris_tps_device.dev.parent = &client->dev;
+	return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+	platform_device_unregister(&osiris_tps_device);
+	return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+	.base		= -1,	/* GPIO can go anywhere at the moment */
+	.setup		= osiris_tps_setup,
+	.teardown	= osiris_tps_remove,
+};
+
 /* I2C devices fitted. */
 
 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("tps65011", 0x48),
 		.irq	= IRQ_EINT20,
+		.platform_data = &osiris_tps_board,
 	},
 };
 
@@ -377,8 +411,6 @@
 
 	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 
-	s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
@@ -408,6 +440,7 @@
 	sysdev_register(&osiris_pm_sysdev);
 
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&osiris_nand_info);
 
 	s3c_cpufreq_setboard(&osiris_cpufreq);
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bc8d8d1..a952a13a 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-rx3715.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.handhelds.org/projects/rx3715.html
@@ -149,7 +149,7 @@
 	.gpdup_mask =	0xffffffff,
 };
 
-static struct mtd_partition rx3715_nand_part[] = {
+static struct mtd_partition __initdata rx3715_nand_part[] = {
 	[0] = {
 		.name		= "Whole Flash",
 		.offset		= 0,
@@ -158,7 +158,7 @@
 	}
 };
 
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 	[0] = {
 		.name		= "Internal",
 		.nr_chips	= 1,
@@ -167,7 +167,7 @@
 	},
 };
 
-static struct s3c2410_platform_nand rx3715_nand_info = {
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 50,
 	.twrph1		= 15,
@@ -186,8 +186,6 @@
 
 static void __init rx3715_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
@@ -205,6 +203,7 @@
 #endif
 	s3c_pm_init();
 
+	s3c_nand_set_platdata(&rx3715_nand_info);
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 }
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index db6eafb..ec13e74 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.fluff.org/ben/smdk2440/
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0fb385b..f76d6ff 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -423,7 +423,7 @@
 	},
 };
 
-static struct s3c2410_nand_set gta02_nand_sets[] = {
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
 	[0] = {
 		/*
 		 * This name is also hard-coded in the boot loaders, so
@@ -442,7 +442,7 @@
  * data sheet (K5D2G13ACM-D075 MCP Memory).
  */
 
-static struct s3c2410_platform_nand gta02_nand_info = {
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.tacls		= 0,
 	.twrph0		= 25,
 	.twrph1		= 15,
@@ -621,9 +621,9 @@
 #endif
 
 	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-	s3c_device_nand.dev.platform_data = &gta02_nand_info;
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 79e4d93..d88c8b2 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
index af2abd7..be0af51 100644
--- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index fc8b223..106ee13 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -48,6 +48,8 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
 #define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
@@ -64,6 +66,9 @@
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -79,5 +84,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
index 4701979..f566115 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -1,195 +1,30 @@
-/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
+ * Copyright 2009 Samsung Electronics Co.
  *
- * S3C64XX - new-style framebuffer register definitions
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
  *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
- *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
+ * Framebuffer register definitions for Samsung S3C64xx.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
 
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
-/* Video buffer addresses */
-
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDINTCON0				(0x130)
-
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
-
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+#include <plat/regs-fb-v4.h>
 
 /* Palette registers */
-
 #define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
 #define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
 #define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
 #define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
 #define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
 static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 {
 	switch (window) {
@@ -203,57 +38,4 @@
 	BUG();
 }
 
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index b42bdd0f..d876ee5 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -45,6 +45,7 @@
 
 	s3c6400_default_sdhci0();
 	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 9b67c66..522c086 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -58,6 +58,7 @@
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index c574105..cdd4b53 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -250,7 +250,7 @@
 {
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+	s3c_nand_set_platdata(&hmt_nand_info);
 
 	gpio_request(S3C64XX_GPC(7), "usb power");
 	gpio_direction_output(S3C64XX_GPC(7), 0);
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 9f1a214..480d297 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -184,6 +185,43 @@
 	},
 };
 
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -198,6 +236,10 @@
 	&s3c_device_fb,
 	&s3c_device_usb,
 	&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
@@ -232,6 +274,14 @@
 };
 
 /* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
 static struct regulator_init_data wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
@@ -239,6 +289,8 @@
 		.max_uV = 3000000,
 		.always_on = 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
 /* ARM core */
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba5..0dd2b8c 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -14,9 +14,23 @@
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_SDHCI
+        bool
+        select S5PC1XX_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PC100 based SDHCI systems
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC1XX_SETUP_I2C0
 	select S5PC1XX_SETUP_I2C1
+	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index afc89b3..809ff10 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -13,5 +13,9 @@
 
 obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
 
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+
 # machine support
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 0e71889..d79e757 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,6 +22,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
+#include <asm/proc-fns.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -45,6 +48,23 @@
 static struct map_desc s5pc100_iodesc[] __initdata = {
 };
 
+static void s5pc100_idle(void)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S5PC100_PWR_CFG);
+	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+	__raw_writel(tmp, S5PC100_PWR_CFG);
+
+	tmp = __raw_readl(S5PC100_OTHERS);
+	tmp |= S5PC100_PMU_INT_DISABLE;
+	__raw_writel(tmp, S5PC100_OTHERS);
+
+	cpu_do_idle();
+}
+
 /* s5pc100_map_io
  *
  * register the standard cpu IO areas
@@ -55,6 +75,13 @@
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
 
 	/* initialise device information early */
+	s5pc100_default_sdhci0();
+	s5pc100_default_sdhci1();
+	s5pc100_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
 }
 
 void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@
 {
 	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
 
+	s5pc1xx_idle = s5pc100_idle;
+
 	return sysdev_register(&s5pc100_sysdev);
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index c74fc93..2c4cbe8 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -18,40 +18,45 @@
 #define gpio_to_irq	__gpio_to_irq
 
 /* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR	(8)
-#define S5PC1XX_GPIO_A1_NR	(5)
-#define S5PC1XX_GPIO_B_NR	(8)
-#define S5PC1XX_GPIO_C_NR	(5)
-#define S5PC1XX_GPIO_D_NR	(7)
-#define S5PC1XX_GPIO_E0_NR	(8)
-#define S5PC1XX_GPIO_E1_NR	(6)
-#define S5PC1XX_GPIO_F0_NR	(8)
-#define S5PC1XX_GPIO_F1_NR	(8)
-#define S5PC1XX_GPIO_F2_NR	(8)
-#define S5PC1XX_GPIO_F3_NR	(4)
-#define S5PC1XX_GPIO_G0_NR	(8)
-#define S5PC1XX_GPIO_G1_NR	(3)
-#define S5PC1XX_GPIO_G2_NR	(7)
-#define S5PC1XX_GPIO_G3_NR	(7)
-#define S5PC1XX_GPIO_H0_NR	(8)
-#define S5PC1XX_GPIO_H1_NR	(8)
-#define S5PC1XX_GPIO_H2_NR	(8)
-#define S5PC1XX_GPIO_H3_NR	(8)
-#define S5PC1XX_GPIO_I_NR	(8)
-#define S5PC1XX_GPIO_J0_NR	(8)
-#define S5PC1XX_GPIO_J1_NR	(5)
-#define S5PC1XX_GPIO_J2_NR	(8)
-#define S5PC1XX_GPIO_J3_NR	(8)
-#define S5PC1XX_GPIO_J4_NR	(4)
-#define S5PC1XX_GPIO_K0_NR	(8)
-#define S5PC1XX_GPIO_K1_NR	(6)
-#define S5PC1XX_GPIO_K2_NR	(8)
-#define S5PC1XX_GPIO_K3_NR	(8)
-#define S5PC1XX_GPIO_MP00_NR	(8)
-#define S5PC1XX_GPIO_MP01_NR	(8)
-#define S5PC1XX_GPIO_MP02_NR	(8)
-#define S5PC1XX_GPIO_MP03_NR	(8)
-#define S5PC1XX_GPIO_MP04_NR	(5)
+#define S5PC100_GPIO_A0_NR	(8)
+#define S5PC100_GPIO_A1_NR	(5)
+#define S5PC100_GPIO_B_NR	(8)
+#define S5PC100_GPIO_C_NR	(5)
+#define S5PC100_GPIO_D_NR	(7)
+#define S5PC100_GPIO_E0_NR	(8)
+#define S5PC100_GPIO_E1_NR	(6)
+#define S5PC100_GPIO_F0_NR	(8)
+#define S5PC100_GPIO_F1_NR	(8)
+#define S5PC100_GPIO_F2_NR	(8)
+#define S5PC100_GPIO_F3_NR	(4)
+#define S5PC100_GPIO_G0_NR	(8)
+#define S5PC100_GPIO_G1_NR	(3)
+#define S5PC100_GPIO_G2_NR	(7)
+#define S5PC100_GPIO_G3_NR	(7)
+#define S5PC100_GPIO_H0_NR	(8)
+#define S5PC100_GPIO_H1_NR	(8)
+#define S5PC100_GPIO_H2_NR	(8)
+#define S5PC100_GPIO_H3_NR	(8)
+#define S5PC100_GPIO_I_NR	(8)
+#define S5PC100_GPIO_J0_NR	(8)
+#define S5PC100_GPIO_J1_NR	(5)
+#define S5PC100_GPIO_J2_NR	(8)
+#define S5PC100_GPIO_J3_NR	(8)
+#define S5PC100_GPIO_J4_NR	(4)
+#define S5PC100_GPIO_K0_NR	(8)
+#define S5PC100_GPIO_K1_NR	(6)
+#define S5PC100_GPIO_K2_NR	(8)
+#define S5PC100_GPIO_K3_NR	(8)
+#define S5PC100_GPIO_L0_NR	(8)
+#define S5PC100_GPIO_L1_NR	(8)
+#define S5PC100_GPIO_L2_NR	(8)
+#define S5PC100_GPIO_L3_NR	(8)
+#define S5PC100_GPIO_L4_NR	(8)
+#define S5PC100_GPIO_MP00_NR	(8)
+#define S5PC100_GPIO_MP01_NR	(8)
+#define S5PC100_GPIO_MP02_NR	(8)
+#define S5PC100_GPIO_MP03_NR	(8)
+#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -64,83 +69,94 @@
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
 enum s3c_gpio_number {
-	S5PC1XX_GPIO_A0_START 	= 0,
-	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
-	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
-	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
-	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
-	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
-	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
-	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
-	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
-	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
-	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
-	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
-	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
-	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
-	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
-	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
-	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
-	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
-	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
-	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
-	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
-	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
-	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
-	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
-	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
-	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
-	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
-	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
-	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
-	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
-	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
-	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
-	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
-	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+	S5PC100_GPIO_A0_START	= 0,
+	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
 };
 
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END		S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 622720d..b53fa48 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,4 +11,9 @@
 
 #include <plat/irqs.h>
 
+/* LCD */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 9e9f391..4681ebe 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -17,6 +17,19 @@
 
 #include <plat/map-base.h>
 
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
+ * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
+ * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
+ * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
+ * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
+ * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
+ *
+ */
 
 /* Chip ID */
 #define S5PC100_PA_CHIPID	(0xE0000000)
@@ -24,13 +37,20 @@
 #define S5PC1XX_VA_CHIPID	S3C_VA_SYS
 
 /* System */
-#define S5PC100_PA_SYS		(0xE0100000)
-#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK		(0xE0100000)
+#define S5PC100_PA_CLK_OTHER	(0xE0200000)
+#define S5PC100_PA_PWR		(0xE0108000)
 #define S5PC1XX_PA_CLK		S5PC100_PA_CLK
 #define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
 #define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
 #define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO		(0xE0300000)
+#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
 #define S5PC100_PA_VIC		(0xE4000000)
@@ -40,23 +60,64 @@
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+/* DMA */
+#define S5PC100_PA_MDMA		(0xE8100000)
+#define S5PC100_PA_PDMA0	(0xE9000000)
+#define S5PC100_PA_PDMA1	(0xE9200000)
+
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
 #define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
 #define S5PC1XX_VA_TIMER	S3C_VA_TIMER
 
+/* RTC */
+#define S5PC100_PA_RTC		(0xEA300000)
+
 /* UART */
 #define S5PC100_PA_UART		(0xEC000000)
 #define S5PC1XX_PA_UART		S5PC100_PA_UART
 #define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* IIC */
-#define S5PC100_PA_IIC		(0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C		(0xEC100000)
+#define S5PC100_PA_I2C1		(0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG	(0xED200000)
+#define S5PC100_PA_USB_HSPHY	(0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB		(0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D		(0xEE800000)
+#define S5PC100_PA_JPEG		(0xEE500000)
+#define S5PC100_PA_ROTATOR	(0xEE100000)
+#define S5PC100_PA_G3D		(0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0		(0xF2000000)
+#define S5PC100_PA_I2S1		(0xF2100000)
+#define S5PC100_PA_I2S2		(0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD	(0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC	(0xF3000000)
 
 /* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
+#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
 
 /* compatibility defines. */
+#define S3C_PA_RTC		S5PC100_PA_RTC
 #define S3C_PA_UART		S5PC100_PA_UART
 #define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
 #define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
 #define S3C_VA_UART2		(S3C_VA_UART + 0x800)
 #define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
 #define S3C_UART_OFFSET		0x400
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB		S5PC100_PA_FB
+#define S3C_PA_G2D		S5PC100_PA_G2D
+#define S3C_PA_G3D		S5PC100_PA_G3D
+#define S3C_PA_JPEG		S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
 #define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_IIC
+#define S3C_PA_IIC		S5PC100_PA_I2C
+#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC		S5PC100_PA_TSADC
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
new file mode 100644
index 0000000..1732cd2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *   Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0						(0x118)
+#define VP1_RATECON_EN					(1 << 31)
+#define VP1_CLKRATE_MASK				(0xff)
+
+#define VP1CON1						(0x11c)
+#define VP1_VTREGCON_EN					(1 << 31)
+#define VP1_VBPD_MASK					(0xfff)
+#define VP1_VBPD_SHIFT					(16)
+
+
+#define WPALCON_H					(0x19c)
+#define WPALCON_L					(0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888			(0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888			(0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK				(0x1)
+#define WPALCON_L_W2PAL_L_SHIFT				(6)
+#define WPALCON_L_W3PAL_L_SHIFT				(7)
+#define WPALCON_L_W4PAL_L_SHIFT				(8)
+
+#define WPALCON_L_WxPAL_H_MASK				(0x3)
+#define WPALCON_H_W2PAL_H_SHIFT				(9)
+#define WPALCON_H_W3PAL_H_SHIFT				(13)
+#define WPALCON_H_W4PAL_H_SHIFT				(17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win)				(0x200 + (_win * 8))
+#define VIDWxALPHA1(_win)				(0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x)				((_x) << 16)
+#define VIDW0ALPHAx_R_MASK				(0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT				(16)
+#define VIDW0ALPHAx_G(_x)				((_x) << 8)
+#define VIDW0ALPHAx_G_MASK				(0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT				(8)
+#define VIDW0ALPHAx_B(_x)				((_x) << 0)
+#define VIDW0ALPHAx_B_MASK				(0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT				(0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x)				((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK				(0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT				(16)
+#define VIDW14ALPHAx_G_L(_x)				((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK				(0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT				(8)
+#define VIDW14ALPHAx_B_L(_x)				((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK				(0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT				(0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win)					(0x244 + ((_win) * 4))
+#define BLENDEQ1					(0x244)
+#define BLENDEQ2					(0x248)
+#define BLENDEQ3					(0x24c)
+#define BLENDEQ4					(0x250)
+
+#define BLENDEQx_Q_FUNC(_x)				((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK				(0xf << 18)
+#define BLENDEQx_P_FUNC(_x)				((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK				(0xf << 12)
+#define BLENDEQx_B_FUNC(_x)				((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK				(0xf << 6)
+#define BLENDEQx_A_FUNC(_x)				((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK				(0xf << 0)
+
+#define BLENDCON					(0x260)
+#define BLENDCON_8BIT_ALPHA				(1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE					(0x2400)
+#define WIN0_PAL_END					(0x27fc)
+#define WIN1_PAL_BASE					(0x2800)
+#define WIN1_PAL_END					(0x2bfc)
+#define WIN2_PAL_BASE					(0x2c00)
+#define WIN2_PAL_END					(0x2ffc)
+#define WIN3_PAL_BASE					(0x3000)
+#define WIN3_PAL_END					(0x33fc)
+#define WIN4_PAL_BASE					(0x3400)
+#define WIN4_PAL_END					(0x37fc)
+
+#define WIN0_PAL(_entry)			(WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry)			(WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry)			(WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry)			(WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index e390143..f0d31a2 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,14 +11,21 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
 static void arch_idle(void)
 {
-	/* nothing here yet */
+	if (s5pc1xx_idle)
+		s5pc1xx_idle();
 }
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+	return;
 }
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 214093c..ae3c52c 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -27,16 +27,22 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@
 	},
 };
 
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	/* backlight */
+	gpio_direction_output(S5PC100_GPD(0), power);
+
+	if (power) {
+		/* module reset */
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(100);
+		gpio_direction_output(S5PC100_GPH0(6), 0);
+		mdelay(10);
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(10);
+	}
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+	.set_power	= smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.refresh	= 70,
+		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+	.win[0]		= &smdkc100_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
+};
+
 static struct map_desc smdkc100_iodesc[] = {};
 
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&smdkc100_lcd_powerdev,
 };
 
 static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@
 
 static void __init smdkc100_machine_init(void)
 {
+	/* I2C */
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+	/* LCD init */
+	gpio_request(S5PC100_GPD(0), "GPD");
+	gpio_request(S5PC100_GPH0(6), "GPH0");
+	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.phys_io	= S5PC100_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5PC100_PA_SDRAM + 0x100,
 
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
new file mode 100644
index 0000000..4385986
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	/* [2] = "mmc_bus", not yet succesfuuly used yet */
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 4e5c07f..03a7f38 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -53,23 +53,23 @@
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index bb7b819..89349c1 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,8 +25,8 @@
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
-obj-$(CONFIG_SA1100_H3100)		+= h3600.o
-obj-$(CONFIG_SA1100_H3600)		+= h3600.o
+obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
+obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 55e6447..169e5b8 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -249,10 +249,10 @@
 #endif
 	}
 
-	sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
-			      ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_set_irda_data(&assabet_irda_data);
-	sa11x0_set_mcp_data(&assabet_mcp_data);
+	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
+			    ARRAY_SIZE(assabet_flash_resources));
+	sa11x0_register_irda(&assabet_irda_data);
+	sa11x0_register_mcp(&assabet_mcp_data);
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index ab5883b..051ec0f 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -212,7 +212,7 @@
 	/* maybe turn on 5v0 from the start */
 	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
 
-	sa11x0_set_flash_data(&badge4_flash_data, &badge4_flash_resource, 1);
+	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index fd3ad9c..bc950ef 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -129,8 +129,8 @@
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_set_mcp_data(&cerf_mcp_data);
+	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+	sa11x0_register_mcp(&cerf_mcp_data);
 }
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index bbf2ebc..9982c5c 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -56,6 +57,7 @@
 static struct scoop_config collie_scoop_setup = {
 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
 	.io_out		= COLLIE_SCOOP_IO_OUT,
+	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device colliescoop_device = {
@@ -85,6 +87,70 @@
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
+/*
+ * Collie AC IN
+ */
+static int collie_power_init(struct device *dev)
+{
+	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(COLLIE_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void collie_power_exit(struct device *dev)
+{
+	gpio_free(COLLIE_GPIO_AC_IN);
+}
+
+static int collie_power_ac_online(void)
+{
+	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
+}
+
+static char *collie_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct pda_power_pdata collie_power_data = {
+	.init			= collie_power_init,
+	.is_ac_online		= collie_power_ac_online,
+	.exit			= collie_power_exit,
+	.supplied_to		= collie_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct resource collie_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device collie_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &collie_power_data,
+	.resource		= collie_power_resource,
+	.num_resources		= ARRAY_SIZE(collie_power_resource),
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
@@ -178,6 +244,7 @@
 static struct platform_device *devices[] __initdata = {
 	&collie_locomo_device,
 	&colliescoop_device,
+	&collie_power_device,
 };
 
 static struct mtd_partition collie_partitions[] = {
@@ -248,22 +315,24 @@
 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
-		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
-		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
 
 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
 
-	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
-		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
+		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
 
-	PGSR = COLLIE_GPIO_nREMOCON_ON;
+	PGSR = _COLLIE_GPIO_nREMOCON_ON;
 
 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
 
 	PCFR = PCFR_OPDE;
 
+	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 
@@ -272,9 +341,9 @@
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
-	sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
-			      ARRAY_SIZE(collie_flash_resources));
-	sa11x0_set_mcp_data(&collie_mcp_data);
+	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+			    ARRAY_SIZE(collie_flash_resources));
+	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();
 }
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 23cfdd5..9faea15 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -162,6 +162,17 @@
 	PMCR = PMCR_SF;
 }
 
+static void sa11x0_register_device(struct platform_device *dev, void *data)
+{
+	int err;
+	dev->dev.platform_data = data;
+	err = platform_device_register(dev);
+	if (err)
+		printk(KERN_ERR "Unable to register device %s: %d\n",
+			dev->name, err);
+}
+
+
 static struct resource sa11x0udc_resources[] = {
 	[0] = {
 		.start	= 0x80000000,
@@ -234,9 +245,9 @@
 	.resource	= sa11x0mcp_resources,
 };
 
-void sa11x0_set_mcp_data(struct mcp_plat_data *data)
+void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
-	sa11x0mcp_device.dev.platform_data = data;
+	sa11x0_register_device(&sa11x0mcp_device, data);
 }
 
 static struct resource sa11x0ssp_resources[] = {
@@ -293,13 +304,13 @@
 	.id		= -1,
 };
 
-void sa11x0_set_flash_data(struct flash_platform_data *flash,
-			   struct resource *res, int nr)
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr)
 {
 	flash->name = "sa1100";
-	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
+	sa11x0_register_device(&sa11x0mtd_device, flash);
 }
 
 static struct resource sa11x0ir_resources[] = {
@@ -329,9 +340,9 @@
 	.resource	= sa11x0ir_resources,
 };
 
-void sa11x0_set_irda_data(struct irda_platform_data *irda)
+void sa11x0_register_irda(struct irda_platform_data *irda)
 {
-	sa11x0ir_device.dev.platform_data = irda;
+	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
 static struct platform_device sa11x0rtc_device = {
@@ -343,21 +354,15 @@
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
-	&sa11x0mcp_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
-	&sa11x0mtd_device,
 	&sa11x0rtc_device,
 };
 
 static int __init sa1100_init(void)
 {
 	pm_power_off = sa1100_power_off;
-
-	if (sa11x0ir_device.dev.platform_data)
-		platform_device_register(&sa11x0ir_device);
-
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 793c2e6..ec03f18 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -32,14 +32,11 @@
 struct flash_platform_data;
 struct resource;
 
-extern void sa11x0_set_flash_data(struct flash_platform_data *flash,
-				  struct resource *res, int nr);
-
-struct sa11x0_ssp_plat_ops;
-extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr);
 
 struct irda_platform_data;
-void sa11x0_set_irda_data(struct irda_platform_data *irda);
+void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
-void sa11x0_set_mcp_data(struct mcp_plat_data *data);
+void sa11x0_register_mcp(struct mcp_plat_data *data);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
new file mode 100644
index 0000000..0c7cea0
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -0,0 +1,95 @@
+/*
+ * Support for Compaq iPAQ H3100 handheld computer
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irda.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+/*
+ * helper for sa1100fb
+ */
+static void h3100_lcd_power(int enable)
+{
+	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
+		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+		gpio_free(H3XXX_EGPIO_LCD_ON);
+	} else {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+	}
+}
+
+
+static void __init h3100_map_io(void)
+{
+	h3xxx_map_io();
+
+	sa1100fb_lcd_power = h3100_lcd_power;
+
+	/* Older bootldrs put GPIO2-9 in alternate mode on the
+	   assumption that they are used for video */
+	GAFR &= ~0x000001fb;
+}
+
+/*
+ * This turns the IRDA power on or off on the Compaq H3100
+ */
+static int h3100_irda_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(H3100_GPIO_IR_ON, state);
+	return 0;
+}
+
+static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
+{
+	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static struct irda_platform_data h3100_irda_data = {
+	.set_power	= h3100_irda_set_power,
+	.set_speed	= h3100_irda_set_speed,
+};
+
+static struct gpio_default_state h3100_default_gpio[] = {
+	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
+	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
+};
+
+static void __init h3100_mach_init(void)
+{
+	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3100_irda_data);
+}
+
+MACHINE_START(H3100, "Compaq iPAQ H3100")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3100_map_io,
+	.init_irq	= sa1100_init_irq,
+	.timer		= &sa1100_timer,
+	.init_machine	= h3100_mach_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 0eb2f15..af3b714 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -1,421 +1,127 @@
 /*
- * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
+ * Support for Compaq iPAQ H3600 handheld computer
  *
- * Copyright 2000,1 Compaq Computer Corporation.
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
  *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *				   and abstracted EGPIO interface.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  */
-#include <linux/module.h>
+
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
+#include <linux/gpio.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/irda.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
 
-#include <mach/h3600.h>
-#include <mach/h3600_gpio.h>
+#include <mach/h3xxx.h>
 
 #include "generic.h"
 
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
-
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		.name		= "H3XXX boot firmware",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "H3XXX rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00040000,
-	}
-};
-
-static void h3xxx_set_vpp(int vpp)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
-}
-
-static struct flash_platform_data h3xxx_flash_data = {
-	.map_name	= "cfi_probe",
-	.set_vpp	= h3xxx_set_vpp,
-	.parts		= h3xxx_partitions,
-	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
-};
-
-static struct resource h3xxx_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-/*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
-
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-};
-
-static void h3xxx_mach_init(void)
-{
-	sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
-	sa11x0_set_irda_data(&h3600_irda_data);
-}
-
-/*
- * low-level UART features
- */
-
-static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
-{
-	if (port->mapbase == _Ser3UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			GPCR = GPIO_H3600_COM_RTS;
-		else
-			GPSR = GPIO_H3600_COM_RTS;
-	}
-}
-
-static u_int h3600_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		int gplr = GPLR;
-		/* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
-		if (gplr & GPIO_H3600_COM_DCD)
-			ret &= ~TIOCM_CD;
-		if (gplr & GPIO_H3600_COM_CTS)
-			ret &= ~TIOCM_CTS;
-	}
-
-	return ret;
-}
-
-static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
-		assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
-	} else if (port->mapbase == _Ser3UTCR0) {
-		assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
-	}
-}
-
-/*
- * Enable/Disable wake up events for this serial port.
- * Obviously, we only support this on the normal COM port.
- */
-static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
-{
-	int err = -EINVAL;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		if (enable)
-			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
-		else
-			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
-		err = 0;
-	}
-	return err;
-}
-
-static struct sa1100_port_fns h3600_port_fns __initdata = {
-	.set_mctrl	= h3600_uart_set_mctrl,
-	.get_mctrl	= h3600_uart_get_mctrl,
-	.pm		= h3600_uart_pm,
-	.set_wake	= h3600_uart_set_wake,
-};
-
 /*
  * helper for sa1100fb
  */
-static void h3xxx_lcd_power(int enable)
+static void h3600_lcd_power(int enable)
 {
-	assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
-}
-
-static struct map_desc h3600_io_desc[] __initdata = {
-  	{	/* static memory bank 2  CS#2 */
-		.virtual	=  H3600_BANK_2_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
-		.length		= 0x02800000,
-		.type		= MT_DEVICE
-	}, {	/* static memory bank 4  CS#4 */
-		.virtual	=  H3600_BANK_4_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* EGPIO 0		CS#5 */
-		.virtual	=  H3600_EGPIO_VIRT,
-		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
+	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+		goto err1;
 	}
-};
-
-/*
- * Common map_io initialization
- */
-
-static void __init h3xxx_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
-
-	sa1100_register_uart_fns(&h3600_port_fns);
-	sa1100_register_uart(0, 3); /* Common serial port */
-//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
-
-	/* Ensure those pins are outputs and driving low  */
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	/* Configure suspend conditions */
-	PGSR = 0;
-	PWER = PWER_GPIO0 | PWER_RTC;
-	PCFR = PCFR_OPDE;
-	PSDR = 0;
-
-	sa1100fb_lcd_power = h3xxx_lcd_power;
-}
-
-/************************* H3100 *************************/
-
-#ifdef CONFIG_SA1100_H3100
-
-#define H3100_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	unsigned int egpio = 0;
-	long	     gpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON;
-		gpio  |= GPIO_H3100_LCD_3V_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		gpio |= GPIO_H3100_AUD_PWR_ON
-			| GPIO_H3100_AUD_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		gpio |= GPIO_H3100_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		gpio |= GPIO_H3100_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		gpio |= GPIO_H3100_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
+	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
+		goto err2;
+	}
+	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
+		goto err3;
+	}
+	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
+		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
+		goto err4;
 	}
 
-	if (egpio || gpio) {
-		local_irq_save(flags);
-		if (setp) {
-			h3100_egpio |= egpio;
-			GPSR = gpio;
-		} else {
-			h3100_egpio &= ~egpio;
-			GPCR = gpio;
-		}
-		H3100_EGPIO = h3100_egpio;
-		local_irq_restore(flags);
-	}
-}
+	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
 
-#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
-			  | GPIO_H3100_GPIO3	  \
-			  | GPIO_H3100_QMUTE	  \
-			  | GPIO_H3100_LCD_3V_ON  \
-			  | GPIO_H3100_AUD_ON	  \
-			  | GPIO_H3100_AUD_PWR_ON \
-			  | GPIO_H3100_IR_ON	  \
-			  | GPIO_H3100_IR_FSEL)
-
-static void __init h3100_map_io(void)
-{
-	h3xxx_map_io();
-
-	/* Initialize h3100-specific values here */
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       H3100_DIRECT_EGPIO;
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~H3100_DIRECT_EGPIO;
-
-	H3100_EGPIO = h3100_egpio;
-	assign_h3600_egpio = h3100_control_egpio;
-}
-
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
-	.map_io		= h3100_map_io,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3100 */
-
-/************************* H3600 *************************/
-
-#ifdef CONFIG_SA1100_H3600
-
-#define H3600_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	unsigned int egpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON |
-			 EGPIO_H3600_LCD_PCI |
-			 EGPIO_H3600_LCD_5V_ON |
-			 EGPIO_H3600_LVDD_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		egpio |= EGPIO_H3600_AUD_AMP_ON |
-			 EGPIO_H3600_AUD_PWR_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		egpio |= EGPIO_H3600_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		egpio |= EGPIO_H3600_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		egpio |= EGPIO_H3600_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
-
-	if (egpio) {
-		local_irq_save(flags);
-		if (setp)
-			h3600_egpio |= egpio;
-		else
-			h3600_egpio &= ~egpio;
-		H3600_EGPIO = h3600_egpio;
-		local_irq_restore(flags);
-	}
+	gpio_free(H3600_EGPIO_LVDD_ON);
+err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
+err3:	gpio_free(H3600_EGPIO_LCD_PCI);
+err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
+err1:	return;
 }
 
 static void __init h3600_map_io(void)
 {
 	h3xxx_map_io();
 
-	/* Initialize h3600-specific values here */
+	sa1100fb_lcd_power = h3600_lcd_power;
+}
 
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-	       GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
+/*
+ * This turns the IRDA power on or off on the Compaq H3600
+ */
+static int h3600_irda_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(H3600_EGPIO_IR_ON, state);
+	return 0;
+}
 
-	H3600_EGPIO = h3600_egpio;	   /* Maintains across sleep? */
-	assign_h3600_egpio = h3600_control_egpio;
+static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
+{
+	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static int h3600_irda_startup(struct device *dev)
+{
+	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
+	if (err)
+		goto err1;
+	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
+	if (err)
+		goto err2;
+	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
+	if (err)
+		goto err2;
+	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
+	if (err)
+		goto err3;
+	return 0;
+
+err3:	gpio_free(H3600_EGPIO_IR_FSEL);
+err2:	gpio_free(H3600_EGPIO_IR_ON);
+err1:	return err;
+}
+
+static void h3600_irda_shutdown(struct device *dev)
+{
+	gpio_free(H3600_EGPIO_IR_ON);
+	gpio_free(H3600_EGPIO_IR_FSEL);
+}
+
+static struct irda_platform_data h3600_irda_data = {
+	.set_power	= h3600_irda_set_power,
+	.set_speed	= h3600_irda_set_speed,
+	.startup	= h3600_irda_startup,
+	.shutdown	= h3600_irda_shutdown,
+};
+
+static struct gpio_default_state h3600_default_gpio[] = {
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+};
+
+static void __init h3600_mach_init(void)
+{
+	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -425,8 +131,6 @@
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
+	.init_machine	= h3600_mach_init,
 MACHINE_END
 
-#endif /* CONFIG_SA1100_H3600 */
-
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
new file mode 100644
index 0000000..b0784c9
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -0,0 +1,313 @@
+/*
+ * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
+{
+	while (n--) {
+		const char *name = s->name;
+		int err;
+
+		if (!name)
+			name = "[init]";
+		err = gpio_request(s->gpio, name);
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to request: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (s->mode >= 0) {
+			err = gpio_direction_output(s->gpio, s->mode);
+		} else {
+			err = gpio_direction_input(s->gpio);
+		}
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (!s->name)
+			gpio_free(s->gpio);
+		s++;
+	}
+}
+
+
+/*
+ * H3xxx flash support
+ */
+static struct mtd_partition h3xxx_partitions[] = {
+	{
+		.name		= "H3XXX boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "H3XXX rootfs",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00040000,
+	}
+};
+
+static void h3xxx_set_vpp(int vpp)
+{
+	gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
+}
+
+static int h3xxx_flash_init(void)
+{
+	int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
+	if (err) {
+		pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
+		return err;
+	}
+
+	err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
+	if (err)
+		gpio_free(H3XXX_EGPIO_VPP_ON);
+
+	return err;
+}
+
+static void h3xxx_flash_exit(void)
+{
+	gpio_free(H3XXX_EGPIO_VPP_ON);
+}
+
+static struct flash_platform_data h3xxx_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= h3xxx_set_vpp,
+	.init		= h3xxx_flash_init,
+	.exit		= h3xxx_flash_exit,
+	.parts		= h3xxx_partitions,
+	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
+};
+
+static struct resource h3xxx_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+
+/*
+ * H3xxx uart support
+ */
+static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
+	}
+}
+
+static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
+{
+	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		/*
+		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
+		 */
+		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
+			ret &= ~TIOCM_CD;
+		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
+			ret &= ~TIOCM_CTS;
+	}
+
+	return ret;
+}
+
+static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
+			gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
+			gpio_free(H3XXX_EGPIO_RS232_ON);
+		} else {
+			pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
+				__func__);
+		}
+	}
+}
+
+/*
+ * Enable/Disable wake up events for this serial port.
+ * Obviously, we only support this on the normal COM port.
+ */
+static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
+{
+	int err = -EINVAL;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		if (enable)
+			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
+		else
+			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
+		err = 0;
+	}
+	return err;
+}
+
+static struct sa1100_port_fns h3xxx_port_fns __initdata = {
+	.set_mctrl	= h3xxx_uart_set_mctrl,
+	.get_mctrl	= h3xxx_uart_get_mctrl,
+	.pm		= h3xxx_uart_pm,
+	.set_wake	= h3xxx_uart_set_wake,
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start	= H3600_EGPIO_PHYS,
+		.end	= H3600_EGPIO_PHYS + 0x4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start	= 0,
+		.gpio_base	= H3XXX_EGPIO_BASE,
+		.num_gpios	= 16,
+		.direction	= HTC_EGPIO_OUTPUT,
+		.initial_values	= 0x0080, /* H3XXX_EGPIO_RS232_ON */
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width	= 16,
+	.bus_width	= 16,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device h3xxx_egpio = {
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
+	.dev		= {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * GPIO keys
+ */
+
+static struct gpio_keys_button h3xxx_button_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= H3XXX_GPIO_PWR_BUTTON,
+		.desc		= "Power Button",
+		.active_low	= 1,
+		.type		= EV_KEY,
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_ENTER,
+		.gpio		= H3XXX_GPIO_ACTION_BUTTON,
+		.active_low	= 1,
+		.desc		= "Action button",
+		.type		= EV_KEY,
+		.wakeup		= 0,
+	},
+};
+
+static struct gpio_keys_platform_data h3xxx_keys_data = {
+	.buttons  = h3xxx_button_table,
+	.nbuttons = ARRAY_SIZE(h3xxx_button_table),
+};
+
+static struct platform_device h3xxx_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3xxx_keys_data,
+	},
+};
+
+static struct platform_device *h3xxx_devices[] = {
+	&h3xxx_egpio,
+	&h3xxx_keys,
+};
+
+void __init h3xxx_mach_init(void)
+{
+	sa1100_register_uart_fns(&h3xxx_port_fns);
+	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
+}
+
+static struct map_desc h3600_io_desc[] __initdata = {
+	{	/* static memory bank 2  CS#2 */
+		.virtual	=  H3600_BANK_2_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
+		.length		= 0x02800000,
+		.type		= MT_DEVICE
+	}, {	/* static memory bank 4  CS#4 */
+		.virtual	=  H3600_BANK_4_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* EGPIO 0		CS#5 */
+		.virtual	=  H3600_EGPIO_VIRT,
+		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
+};
+
+/*
+ * Common map_io initialization
+ */
+
+void __init h3xxx_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
+
+	sa1100_register_uart(0, 3); /* Common serial port */
+//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
+
+	/* Ensure those pins are outputs and driving low  */
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+	/* Configure suspend conditions */
+	PGSR = 0;
+	PCFR = PCFR_OPDE;
+	PSDR = 0;
+
+	GPCR = 0x0fffffff;	/* All outputs are set low by default */
+	GPDR = 0;		/* Configure all GPIOs as input */
+}
+
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index e7056c0..51568df 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -187,7 +187,7 @@
 
 static void __init hackkit_init(void)
 {
-	sa11x0_set_flash_data(&hackkit_flash_data, &hackkit_flash_resource, 1);
+	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
 }
 
 /**********************************************************************
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9efb569..71a0b3f 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -25,29 +25,39 @@
 #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
 				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
-				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+				COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
 
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib  */
 
-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY		(0)
+#define COLLIE_GPIO_AC_IN		(1)
+#define COLLIE_GPIO_SDIO_INT		(11)
+#define COLLIE_GPIO_CF_IRQ		(14)
+#define COLLIE_GPIO_nREMOCON_INT	(15)
+#define COLLIE_GPIO_UCB1x00_RESET	(16)
+#define COLLIE_GPIO_nMIC_ON		(17)
+#define COLLIE_GPIO_nREMOCON_ON		(18)
+#define COLLIE_GPIO_CO			(20)
+#define COLLIE_GPIO_MCP_CLK		(21)
+#define COLLIE_GPIO_CF_CD		(22)
+#define COLLIE_GPIO_UCB1x00_IRQ		(23)
+#define COLLIE_GPIO_WAKEUP		(24)
+#define COLLIE_GPIO_GA_INT		(25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	(26)
 
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY		GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN		GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON		GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON	GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO			GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP		GPIO_GPIO(24)
 /* Interrupts */
 
 #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
@@ -70,19 +80,20 @@
 #define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
 
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON      	(COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN		(UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT		(UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+						| UCB_IO_6)
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 582a0c9..7befc10 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -49,20 +49,9 @@
 
 #define gpio_cansleep	__gpio_cansleep
 
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio)	((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+					(IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq)	((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+					(irq - IRQ_GPIO11 + 11))
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa..0000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT	0xf0000000
-#define H3600_BANK_2_VIRT	0xf1000000
-#define H3600_BANK_4_VIRT	0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
-	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
-	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
-	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
-	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
-	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
-	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
-	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
-	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
-	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
-	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
deleted file mode 100644
index a36ca76..0000000
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON		(1 << 0)
-#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 0000000..7d9df16
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON		0
+#define H3XXX_GPIO_PCMCIA_CD1		10
+#define H3XXX_GPIO_PCMCIA_IRQ1		11
+#define H3XXX_GPIO_PCMCIA_CD0		17
+#define H3XXX_GPIO_ACTION_BUTTON	18
+#define H3XXX_GPIO_SYS_CLK		19
+#define H3XXX_GPIO_PCMCIA_IRQ0		21
+#define H3XXX_GPIO_COM_DCD		23
+#define H3XXX_GPIO_OPTION		24
+#define H3XXX_GPIO_COM_CTS		25
+#define H3XXX_GPIO_COM_RTS		26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON		2
+#define H3100_GPIO_QMUTE		4
+#define H3100_GPIO_LCD_3V_ON		5
+#define H3100_GPIO_AUD_ON		6
+#define H3100_GPIO_AUD_PWR_ON		7
+#define H3100_GPIO_IR_ON		8
+#define H3100_GPIO_IR_FSEL		9
+
+#define H3600_GPIO_CLK_SET0		12	/* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1		13
+#define H3600_GPIO_SOFT_RESET		20	/* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK		22
+#define H3600_GPIO_OPT_DET		27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE		(GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON		(H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET		(H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
+#define H3XXX_EGPIO_OPT_RESET		(H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
+#define H3XXX_EGPIO_CODEC_NRESET	(H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON	(H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON		(H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
+#define H3XXX_EGPIO_LCD_ON		(H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
+#define H3XXX_EGPIO_RS232_ON		(H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI		(H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
+#define H3600_EGPIO_IR_ON		(H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
+#define H3600_EGPIO_AUD_AMP_ON		(H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
+#define H3600_EGPIO_AUD_PWR_ON		(H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
+#define H3600_EGPIO_QMUTE		(H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
+#define H3600_EGPIO_IR_FSEL		(H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+	int gpio;
+	int mode;
+	const char *name;
+};
+
+#define GPIO_MODE_IN	-1
+#define GPIO_MODE_OUT0	0
+#define GPIO_MODE_OUT1	1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a..ed1a331 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@
 	u32 mccr0;
 	u32 mccr1;
 	unsigned int sclk_rate;
+	int gpio_base;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index fd776bb..13ebd2d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -354,7 +354,7 @@
 
 static void __init jornada720_mach_init(void)
 {
-	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+	sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1);
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 1f940df..68069d6 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -28,7 +28,7 @@
 
 static void __init lart_init(void)
 {
-	sa11x0_set_mcp_data(&lart_mcp_data);
+	sa11x0_register_mcp(&lart_mcp_data);
 }
 
 static struct map_desc lart_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index e1458bc..1ccd601 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -109,7 +109,7 @@
 
 static void __init pleb_init(void)
 {
-	sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources,
+	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
 			      ARRAY_SIZE(pleb_flash_resources));
 
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index ddd917d..85e82bb 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -59,8 +59,8 @@
 
 static void __init shannon_init(void)
 {
-	sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_set_mcp_data(&shannon_mcp_data);
+	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+	sa11x0_register_mcp(&shannon_mcp_data);
 }
 
 static void __init shannon_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 3c74534..49cfd64 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -166,9 +166,9 @@
 	PCFR = 0;
 	PSDR = 0;
 
-	sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources,
+	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_set_mcp_data(&simpad_mcp_data);
+	sa11x0_register_mcp(&simpad_mcp_data);
 }
 
 static void simpad_power_off(void)
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c0..fab46fe 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_I2C_STU300)          += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f8..c73ed06 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
  */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
 #include <mach/irqs.h>
 
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING		0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING		0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING		0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING		0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING	0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING		0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING		0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING		0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING		0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING		0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING	0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING	0xAC
+
+static struct regulator_consumer_supply supply_ldo_c[] = {
+	{
+		.dev_name = "ab3100-codec",
+		.supply = "vaudio", /* Powers the codec */
+	},
+};
+
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+	{
+		.dev = NULL,
+		.supply = "vana15", /* Powers the SoC (CPU etc) */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_g[] = {
+	{
+		.dev_name = "mmci",
+		.supply = "vmmc", /* Powers MMC/SD card */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_h[] = {
+	{
+		.dev_name = "xgam_pdi",
+		.supply = "vdisp", /* Powers camera, display etc */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_k[] = {
+	{
+		.dev_name = "irda",
+		.supply = "vir", /* Power IrDA */
+	},
+};
+
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+	{
+		.dev = NULL,
+		.supply = "vext", /* External power */
+	},
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static struct ab3100_platform_data ab3100_plf_data = {
+	.reg_constraints = {
+		/* LDO A routing and constraints */
+		{
+			.constraints = {
+				.name = "vrad",
+				.min_uV = LDO_A_VOLTAGE,
+				.max_uV = LDO_A_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO C routing and constraints */
+		{
+			.constraints = {
+				.min_uV = LDO_C_VOLTAGE,
+				.max_uV = LDO_C_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+			.consumer_supplies = supply_ldo_c,
+		},
+		/* LDO D routing and constraints */
+		{
+			.constraints = {
+				.min_uV = LDO_D_VOLTAGE,
+				.max_uV = LDO_D_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+				/*
+				 * Actually this is boot_on but we need
+				 * to reference count it externally to
+				 * be able to shut down the system.
+				 */
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+			.consumer_supplies = supply_ldo_d,
+		},
+		/* LDO E routing and constraints */
+		{
+			.constraints = {
+				.name = "vio",
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO F routing and constraints */
+		{
+			.constraints = {
+				.name = "vana25",
+				.min_uV = 2500000,
+				.max_uV = 2500000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO G routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1500000,
+				.max_uV = 2850000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+			.consumer_supplies = supply_ldo_g,
+		},
+		/* LDO H routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1200000,
+				.max_uV = 2750000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+			.consumer_supplies = supply_ldo_h,
+		},
+		/* LDO K routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 2750000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+			.consumer_supplies = supply_ldo_k,
+		},
+		/* External regulator interface. No fixed voltage specified.
+		 * If we knew the voltage of the external regulator and it
+		 * was connected on the board, we could add the (fixed)
+		 * voltage for it here.
+		 */
+		{
+			.constraints = {
+				.min_uV = 0,
+				.max_uV = 0,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+			.consumer_supplies = supply_ldo_ext,
+		},
+		/* Buck converter routing and constraints */
+		{
+			.constraints = {
+				.name = "vcore",
+				.min_uV = 1200000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+	},
+	.reg_initvals = {
+		LDO_A_SETTING,
+		LDO_C_SETTING,
+		LDO_E_SETTING,
+		LDO_E_SLEEP_SETTING,
+		LDO_F_SETTING,
+		LDO_G_SETTING,
+		LDO_H_SETTING,
+		LDO_K_SETTING,
+		LDO_EXT_SETTING,
+		BUCK_SETTING,
+		BUCK_SLEEP_SETTING,
+		LDO_D_SETTING,
+	},
+};
+
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
 	{
 		.type = "ab3100",
 		.addr = 0x48,
 		.irq = IRQ_U300_IRQ0_EXT,
+		.platform_data = &ab3100_plf_data,
 	},
 };
 
@@ -38,6 +282,11 @@
 {
 	i2c_register_board_info(0, bus0_i2c_board_info,
 				ARRAY_SIZE(bus0_i2c_board_info));
+	/*
+	 * This makes the core shut down all unused regulators
+	 * after all the initcalls have completed.
+	 */
+	regulator_has_full_constraints();
 	i2c_register_board_info(1, bus1_i2c_board_info,
 				ARRAY_SIZE(bus1_i2c_board_info));
 }
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016..109f5a6 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@
 	return mmci_card->mmc_inserted;
 }
 
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
-	int v;
-
-	/*
-	 * MMC Spec:
-	 * bit 7:	1.70 - 1.95V
-	 * bit 8 - 14:	2.0 - 2.6V
-	 * bit 15 - 23:	2.7 - 3.6V
-	 *
-	 * ab3100 voltages:
-	 * 000 - 2.85V
-	 * 001 - 2.75V
-	 * 010 - 1.8V
-	 * 011 - 1.5V
-	 */
-	switch (voltage) {
-	case 8:
-		v = 3;
-		break;
-	case 9:
-	case 10:
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-	case 15:
-		v = 1;
-		break;
-	case 16:
-		v = 1;
-		break;
-	case 17:
-	case 18:
-	case 19:
-	case 20:
-	case 21:
-	case 22:
-	case 23:
-	case 24:
-		v = 0;
-		break;
-	default:
-		v = 0;
-		break;
-	}
-
-	/* PL180 voltage register bits */
-	return v << 2;
-}
-
-
-
 static int mmci_callback(void *data)
 {
 	struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@
 	if (!mmci_card)
 		return -ENOMEM;
 
+	/*
+	 * Do not set ocr_mask or voltage translation function,
+	 * we have a regulator we can control instead.
+	 */
 	/* Nominally 2.85V on our platform */
-	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
-	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 0000000..9c53f01
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+	sigset_t old, all;
+
+	sigfillset(&all);
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		/* Disable LDO D to shut down the system */
+		if (main_power_15)
+			regulator_disable(main_power_15);
+		else
+			pr_err("regulator not available to shut down system\n");
+		(void) sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+	return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+	int err;
+	u32 val;
+
+	pr_info("U300: setting up board power\n");
+	main_power_15 = regulator_get(NULL, "vana15");
+	if (IS_ERR(main_power_15)) {
+		pr_err("could not get vana15");
+		return PTR_ERR(main_power_15);
+	}
+	err = regulator_enable(main_power_15);
+	if (err) {
+		pr_err("could not enable vana15\n");
+		return err;
+	}
+
+	/*
+	 * On U300 a special system controller register pulls up the DC
+	 * until the vana15 (LDO D) regulator comes up. At this point, all
+	 * regulators are set and we do not need power control via
+	 * DC ON anymore. This function will likely be moved whenever
+	 * the rest of the U300 power management is implemented.
+	 */
+	pr_info("U300: disable system controller pull-up\n");
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	/* Register globally exported PM poweroff hook */
+	pm_power_off = u300_pm_poweroff;
+
+	return 0;
+}
+
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 0000000..03625d7
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+	depends on ARCH_U8500
+
+comment "ST-Ericsson Multicore Mobile Platforms"
+
+config MACH_U8500_MOP
+	bool "U8500 Early Development platform"
+	default y
+	select ARM_GIC
+	select HAS_MTU
+	help
+	  Include support for mop500 development platform
+	  based on U8500 architecture. The platform is based
+	  on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 0000000..95e6e24c
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+
+obj-y				:= clock.o
+obj-$(CONFIG_ARCH_U8500)	+= cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 0000000..c7e75ac
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 0000000..aa5afbc
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/mtu.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(U8500_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(U8500_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device uart2_device = {
+	.dev = { .init_name = "uart2" },
+	__MEM_4K_RESOURCE(U8500_UART2_BASE),
+	.irq = {IRQ_UART2, NO_IRQ},
+};
+
+static void ab4500_spi_cs_control(u32 command)
+{
+	/* set the FRM signal, which is CS  - TODO */
+}
+
+struct pl022_config_chip ab4500_chip_info = {
+	.lbm = LOOPBACK_DISABLED,
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* we can act as master only */
+	.hierarchy = SSP_MASTER,
+	.slave_tx_disable = 0,
+	.endian_rx = SSP_RX_MSB,
+	.endian_tx = SSP_TX_MSB,
+	.data_size = SSP_DATA_BITS_24,
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_HIGH,
+	.cs_control = ab4500_spi_cs_control,
+};
+
+static struct spi_board_info u8500_spi_devices[] = {
+	{
+		.modalias = "ab4500",
+		.controller_data = &ab4500_chip_info,
+		.max_speed_hz = 12000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+		.irq = IRQ_AB4500,
+	},
+};
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+	.bus_id = 0,
+	/* pl022 not yet supports dma */
+	.enable_dma = 0,
+	/* on this platform, gpio 31,142,144,214 &
+	 * 224 are connected as chip selects
+	 */
+	.num_chipselect = 5,
+};
+
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022",
+		.platform_data = &ssp0_platform_data,
+	},
+	.res = {
+		.start = U8500_SSP0_BASE,
+		.end   = U8500_SSP0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_SSP0, NO_IRQ },
+	/* ST-Ericsson modified id */
+	.periphid = SSP_PER_ID,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&pl022_device,
+};
+
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	/* Setup the local timer base */
+	twd_base = __io_address(U8500_TWD_BASE);
+#endif
+	/* Setup the MTU base */
+	mtu_base = __io_address(U8500_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+static struct sys_timer u8500_timer = {
+	.init	= u8500_timer_init,
+};
+
+static void __init u8500_init_machine(void)
+{
+	int i;
+
+	/* Register the active AMBA devices on this board */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+
+	spi_register_board_info(u8500_spi_devices,
+			ARRAY_SIZE(u8500_spi_devices));
+
+	u8500_init_devices();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+	.phys_io	= U8500_UART2_BASE,
+	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= u8500_map_io,
+	.init_irq	= u8500_init_irq,
+	/* we re-use nomadik timer here */
+	.timer		= &u8500_timer,
+	.init_machine	= u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 0000000..20b6ebb
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ * 	heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+	unsigned long		rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*TODO*/
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* ssp clock */
+static struct clk ssp_clk = {
+	.rate = 48000000,
+};
+
+/* fixed clock */
+static struct clk f38_clk = {
+	.rate = 38400000,
+};
+
+static struct clk_lookup lookups[] = {
+	{
+		/* UART0 */
+		.dev_id		= "uart0",
+		.clk		= &f38_clk,
+	}, {	/* UART1 */
+		.dev_id		= "uart1",
+		.clk		= &f38_clk,
+	}, {	/* UART2 */
+		.dev_id		= "uart2",
+		.clk		= &f38_clk,
+	}, {	/* SSP */
+		.dev_id		= "pl022",
+		.clk		= &ssp_clk,
+	}
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	/* register the clock lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 0000000..5f05e58
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+	/* yet to be added, add i2c0, gpio.. */
+};
+
+#define __IO_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_DEVICE,		\
+}
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+void __init u8500_map_io(void)
+{
+	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+
+void __init u8500_init_irq(void)
+{
+	gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+	return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 0000000..a6be2cd
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2009 ST-Ericsson
+ *	This file is based  ARM Realview platform
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+	dsb
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 0000000..04b37a8
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 0000000..8f21b6a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@MMU enabled?
+	moveq	\rx, #0x80000000	@MMU off, Physical address
+	movne	\rx, #0xF0000000	@MMU on, Virtual address
+	orr	\rx, \rx, #0x7000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 0000000..eece330
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ *	-just satisfied checkpatch script.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020. The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt. We then just
+		 * need to check whether it is in the valid range for an
+		 * IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		/* bits 12-10 = src CPU, 9-0 = int # */
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ
+		 * acknowledge register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of
+		 * interrupt on the controller, since this requires the
+		 * original irqstat value which we won't easily be able
+		 * to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base
+		 * are preserved..
+		 */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 0000000..6da6502
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL	0xf0000000
+#define U8500_IO_PHYSICAL	0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE		0x80000000
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_PER4_BASE		0x80150000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER5_BASE		0xa03e0000
+#define U8500_PER7_BASE		0xa03d0000
+
+#define U8500_SVA_BASE		0xa0100000
+#define U8500_SIA_BASE		0xa0200000
+
+#define U8500_SGA_BASE		0xa0300000
+#define U8500_MCDE_BASE		0xa0350000
+#define U8500_DMA_BASE		0xa0362000
+
+#define U8500_SCU_BASE		0xa0410000
+#define U8500_GIC_CPU_BASE	0xa0410100
+#define U8500_TWD_BASE		0xa0410600
+#define U8500_GIC_DIST_BASE	0xa0411000
+#define U8500_L2CC_BASE		0xa0412000
+
+#define U8500_TWD_SIZE		0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE		(U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE		(U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE		(U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE	(U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID		0x01080022
+
+#endif				/* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 0000000..1cf3f44
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 0000000..394b5dd
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *  Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER                  29
+#define IRQ_LOCALWDOG                   30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START			32
+
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0		(IRQ_SHPI_START + 4)
+#define IRQ_SPI2		(IRQ_SHPI_START + 6)
+#define IRQ_SPI0		(IRQ_SHPI_START + 8)
+#define IRQ_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_I2C3		(IRQ_SHPI_START + 12)
+#define IRQ_SSP0		(IRQ_SHPI_START + 14)
+#define IRQ_MTU1		(IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT		(IRQ_SHPI_START + 18)
+#define IRQ_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_I2C0		(IRQ_SHPI_START + 21)
+#define IRQ_I2C1		(IRQ_SHPI_START + 22)
+#define IRQ_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP		(IRQ_SHPI_START + 29)
+#define IRQ_MSP0		(IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
+#define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_DISP		(IRQ_SHPI_START + 48)
+#define IRQ_SiPI3		(IRQ_SHPI_START + 49)
+#define IRQ_SSP1		(IRQ_SHPI_START + 52)
+#define IRQ_I2C2		(IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_MSP1		(IRQ_SHPI_START + 62)
+#define IRQ_SPI1		(IRQ_SHPI_START + 96)
+#define IRQ_MSP2		(IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4		(IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0		(IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1		(IRQ_SHPI_START + 105)
+#define IRQ_HSITD0		(IRQ_SHPI_START + 106)
+#define IRQ_HSITD1		(IRQ_SHPI_START + 107)
+#define IRQ_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_GPIO7		(IRQ_SHPI_START + 126)
+#define IRQ_GPIO8		(IRQ_SHPI_START + 127)
+
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS			161
+
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 0000000..510571a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 0000000..cf0ce16
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 0000000..b59f7bc
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+#define hard_smp_processor_id()				\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 0000000..c0cd800
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* yet to be implemented - TODO */
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 0000000..d0942c1
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		110000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 0000000..8552eb1
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define U8500_UART_DR		0x80007000
+#define U8500_UART_LCRH		0x8000702c
+#define U8500_UART_CR		0x80007030
+#define U8500_UART_FR		0x80007018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(U8500_UART_CR) & 0x1))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(U8500_UART_FR) & (1 << 5))
+		barrier();
+	writeb(c, U8500_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(U8500_UART_CR) & 0x1))
+		return;
+	while (readb(U8500_UART_FR) & (1 << 3))
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 0000000..86cdbbc
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END	0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 0000000..2288f6a
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 0000000..8dfe7ca
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+	return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (pen_release == -1)
+			break;
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/* nobody is to be released from the pen yet */
+	pen_release = -1;
+
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This would wake up the secondary core from WFE
+	 */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+	__raw_writel(virt_to_phys(u8500_secondary_startup),
+		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		U8500_CPU1_JUMPADDR_OFFSET);
+
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+	__raw_writel(0xA1FEED01,
+		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		U8500_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "U8500: strange CM count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > num_possible_cpus())	{
+		printk(KERN_WARNING
+		       "U8500: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, num_possible_cpus());
+		ncores = num_possible_cpus();
+	}
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+		scu_enable(__io_address(U8500_SCU_BASE));
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98d..51f17b7 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
 #include <mach/map.h>
 
 #include "cpu.h"
@@ -196,6 +197,18 @@
 
 /* SPI device */
 
+static struct w90p910_spi_info nuc900_spiflash_data = {
+	.num_cs		= 1,
+	.lsb		= 0,
+	.txneg		= 1,
+	.rxneg		= 0,
+	.divider	= 24,
+	.sleep		= 0,
+	.txnum		= 0,
+	.txbitlen	= 1,
+	.bus_num	= 0,
+};
+
 static struct resource nuc900_spi_resource[] = {
 	[0] = {
 		.start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
 	.resource	= nuc900_spi_resource,
+	.dev		= {
+				.platform_data = &nuc900_spiflash_data,
+			}
 };
 
 /* spi device, spi flash info */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d81..dd4698c 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -388,7 +388,7 @@
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_V6
@@ -764,6 +764,15 @@
 	help
 	  This option enables the L2x0 PrimeCell.
 
+config CACHE_TAUROS2
+	bool "Enable the Tauros2 L2 cache controller"
+	depends on ARCH_DOVE
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the Tauros2 L2 cache controller (as
+	  found on PJ1/PJ4).
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3
@@ -774,5 +783,5 @@
 
 config ARM_L1_CACHE_SHIFT
 	int
-	default 6 if ARCH_OMAP3
+	default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
 	default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa..827e238 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@
 				   iomap.o
 
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
-				   pgd.o mmu.o
+				   pgd.o mmu.o vmregion.o
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
@@ -87,4 +87,4 @@
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d..747f9a9 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -99,18 +99,25 @@
 
 	l2x0_base = base;
 
-	/* disable L2X0 */
-	writel(0, l2x0_base + L2X0_CTRL);
+	/*
+	 * Check if l2x0 controller is already enabled.
+	 * If you are booting from non-secure mode
+	 * accessing the below registers will fault.
+	 */
+	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
 
-	aux = readl(l2x0_base + L2X0_AUX_CTRL);
-	aux &= aux_mask;
-	aux |= aux_val;
-	writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		/* l2x0 controller is disabled */
 
-	l2x0_inv_all();
+		aux = readl(l2x0_base + L2X0_AUX_CTRL);
+		aux &= aux_mask;
+		aux |= aux_val;
+		writel(aux, l2x0_base + L2X0_AUX_CTRL);
 
-	/* enable L2X0 */
-	writel(1, l2x0_base + L2X0_CTRL);
+		l2x0_inv_all();
+
+		/* enable L2X0 */
+		writel(1, l2x0_base + L2X0_CTRL);
+	}
 
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
new file mode 100644
index 0000000..5086865
--- /dev/null
+++ b/arch/arm/mm/cache-tauros2.c
@@ -0,0 +1,263 @@
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ *   Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ *   Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE		32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start < end) {
+		tauros2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+	u32 u;
+
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+	return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+	u32 u;
+
+	/*
+	 * Read the CPU Extra Features register and verify that the
+	 * Disable L2 Prefetch bit is set.
+	 */
+	u = read_extra_features();
+	if (!(u & 0x01000000)) {
+		printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+		write_extra_features(u | 0x01000000);
+	}
+}
+
+static inline int __init cpuid_scheme(void)
+{
+	extern int processor_id;
+
+	return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+	u32 mmfr3;
+
+	__asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+	return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+	u32 actlr;
+
+	__asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+	return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+	extern int processor_id;
+	char *mode;
+
+	disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+	if ((processor_id & 0xff0f0000) == 0x56050000) {
+		u32 feat;
+
+		/*
+		 * v5 CPUs with Tauros2 have the L2 cache enable bit
+		 * located in the CPU Extra Features register.
+		 */
+		feat = read_extra_features();
+		if (!(feat & 0x00400000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_extra_features(feat | 0x00400000);
+		}
+
+		mode = "ARMv5";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v6
+	/*
+	 * Check whether this CPU lacks support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v6 personality mode if the MMFR3
+	 * register indicates no support for the v7 hierarchical cache
+	 * ops.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+		/*
+		 * When Tauros2 is used in an ARMv6 system, the L2
+		 * enable bit is in the ARMv6 ARM-mandated position
+		 * (bit [26] of the System Control Register).
+		 */
+		if (!(get_cr() & 0x04000000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			adjust_cr(0x04000000, 0x04000000);
+		}
+
+		mode = "ARMv6";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v7
+	/*
+	 * Check whether this CPU has support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v7 personality mode if the MMFR3
+	 * register indicates support for the v7 hierarchical cache
+	 * ops.)
+	 *
+	 * (Although strictly speaking there may exist CPUs that
+	 * implement the v7 cache ops but are only ARMv6 CPUs (due to
+	 * not complying with all of the other ARMv7 requirements),
+	 * there are no real-life examples of Tauros2 being used on
+	 * such CPUs as of yet.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+		u32 actlr;
+
+		/*
+		 * When Tauros2 is used in an ARMv7 system, the L2
+		 * enable bit is located in the Auxiliary System Control
+		 * Register (which is the only register allowed by the
+		 * ARMv7 spec to contain fine-grained cache control bits).
+		 */
+		actlr = read_actlr();
+		if (!(actlr & 0x00000002)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_actlr(actlr | 0x00000002);
+		}
+
+		mode = "ARMv7";
+	}
+#endif
+
+	if (mode == NULL) {
+		printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+		return;
+	}
+
+	printk(KERN_INFO "Tauros2: L2 cache support initialised "
+			 "in %s mode.\n", mode);
+}
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7b..841f355 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@
 	kfrom = kmap_atomic(from, KM_USER0);
 	kto = kmap_atomic(to, KM_USER1);
 	copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(to) != NULL)
+#endif
+		__cpuc_flush_dcache_page(kto);
 	kunmap_atomic(kto, KM_USER1);
 	kunmap_atomic(kfrom, KM_USER0);
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b9590a7..26325cb 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,435 +63,86 @@
 	return mask;
 }
 
-#ifdef CONFIG_MMU
 /*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask.  Note that 'size' must be page aligned.
  */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
-static DEFINE_SPINLOCK(consistent_lock);
-
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- *  struct vm_struct {
- *    struct vm_region	region;
- *    unsigned long	flags;
- *    struct page	**pages;
- *    unsigned int	nr_pages;
- *    unsigned long	phys_addr;
- *  };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- *  struct vm_region vmalloc_head = {
- *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
- *	.vm_start	= VMALLOC_START,
- *	.vm_end		= VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
-	struct list_head	vm_list;
-	unsigned long		vm_start;
-	unsigned long		vm_end;
-	struct page		*vm_pages;
-	int			vm_active;
-};
-
-static struct arm_vm_region consistent_head = {
-	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
-	.vm_start	= CONSISTENT_BASE,
-	.vm_end		= CONSISTENT_END,
-};
-
-static struct arm_vm_region *
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
 {
-	unsigned long addr = head->vm_start, end = head->vm_end - size;
-	unsigned long flags;
-	struct arm_vm_region *c, *new;
-
-	new = kmalloc(sizeof(struct arm_vm_region), gfp);
-	if (!new)
-		goto out;
-
-	spin_lock_irqsave(&consistent_lock, flags);
-
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if ((addr + size) < addr)
-			goto nospc;
-		if ((addr + size) <= c->vm_start)
-			goto found;
-		addr = c->vm_end;
-		if (addr > end)
-			goto nospc;
-	}
-
- found:
-	/*
-	 * Insert this entry _before_ the one we found.
-	 */
-	list_add_tail(&new->vm_list, &c->vm_list);
-	new->vm_start = addr;
-	new->vm_end = addr + size;
-	new->vm_active = 1;
-
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	return new;
-
- nospc:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	kfree(new);
- out:
-	return NULL;
-}
-
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
-{
-	struct arm_vm_region *c;
-	
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_active && c->vm_start == addr)
-			goto out;
-	}
-	c = NULL;
- out:
-	return c;
-}
-
-#ifdef CONFIG_HUGETLB_PAGE
-#error ARM Coherent DMA allocator does not (yet) support huge TLB
-#endif
-
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot)
-{
-	struct page *page;
-	struct arm_vm_region *c;
-	unsigned long order;
+	unsigned long order = get_order(size);
+	struct page *page, *p, *e;
+	void *ptr;
 	u64 mask = get_coherent_dma_mask(dev);
-	u64 limit;
 
-	if (!consistent_pte[0]) {
-		printk(KERN_ERR "%s: not initialised\n", __func__);
-		dump_stack();
+#ifdef CONFIG_DMA_API_DEBUG
+	u64 limit = (mask + 1) & ~mask;
+	if (limit && size >= limit) {
+		dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
+			size, mask);
 		return NULL;
 	}
+#endif
 
 	if (!mask)
-		goto no_page;
-
-	/*
-	 * Sanity check the allocation size.
-	 */
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if ((limit && size >= limit) ||
-	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
-		printk(KERN_WARNING "coherent allocation too big "
-		       "(requested %#x mask %#llx)\n", size, mask);
-		goto no_page;
-	}
-
-	order = get_order(size);
+		return NULL;
 
 	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 
 	page = alloc_pages(gfp, order);
 	if (!page)
-		goto no_page;
+		return NULL;
 
 	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
+	 * Now split the huge page and free the excess pages
 	 */
-	{
-		void *ptr = page_address(page);
-		memset(ptr, 0, size);
-		dmac_flush_range(ptr, ptr + size);
-		outer_flush_range(__pa(ptr), __pa(ptr) + size);
-	}
+	split_page(page, order);
+	for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
+		__free_page(p);
 
 	/*
-	 * Allocate a virtual address in the consistent mapping region.
+	 * Ensure that the allocated pages are zeroed, and that any data
+	 * lurking in the kernel direct-mapped region is invalidated.
 	 */
-	c = arm_vm_region_alloc(&consistent_head, size,
-			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
-	if (c) {
-		pte_t *pte;
-		struct page *end = page + (1 << order);
-		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
-		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+	ptr = page_address(page);
+	memset(ptr, 0, size);
+	dmac_flush_range(ptr, ptr + size);
+	outer_flush_range(__pa(ptr), __pa(ptr) + size);
 
-		pte = consistent_pte[idx] + off;
-		c->vm_pages = page;
-
-		split_page(page, order);
-
-		/*
-		 * Set the "dma handle"
-		 */
-		*handle = page_to_dma(dev, page);
-
-		do {
-			BUG_ON(!pte_none(*pte));
-
-			/*
-			 * x86 does not mark the pages reserved...
-			 */
-			SetPageReserved(page);
-			set_pte_ext(pte, mk_pte(page, prot), 0);
-			page++;
-			pte++;
-			off++;
-			if (off >= PTRS_PER_PTE) {
-				off = 0;
-				pte = consistent_pte[++idx];
-			}
-		} while (size -= PAGE_SIZE);
-
-		/*
-		 * Free the otherwise unused pages.
-		 */
-		while (page < end) {
-			__free_page(page);
-			page++;
-		}
-
-		return (void *)c->vm_start;
-	}
-
-	if (page)
-		__free_pages(page, order);
- no_page:
-	*handle = ~0;
-	return NULL;
+	return page;
 }
-#else	/* !CONFIG_MMU */
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot)
-{
-	void *virt;
-	u64 mask = get_coherent_dma_mask(dev);
-
-	if (!mask)
-		goto error;
-
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
-	virt = kmalloc(size, gfp);
-	if (!virt)
-		goto error;
-
-	*handle =  virt_to_dma(dev, virt);
-	return virt;
-
-error:
-	*handle = ~0;
-	return NULL;
-}
-#endif	/* CONFIG_MMU */
 
 /*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
+ * Free a DMA buffer.  'size' must be page aligned.
  */
-void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+static void __dma_free_buffer(struct page *page, size_t size)
 {
-	void *memory;
+	struct page *e = page + (size >> PAGE_SHIFT);
 
-	if (dma_alloc_from_coherent(dev, size, handle, &memory))
-		return memory;
-
-	if (arch_is_coherent()) {
-		void *virt;
-
-		virt = kmalloc(size, gfp);
-		if (!virt)
-			return NULL;
-		*handle =  virt_to_dma(dev, virt);
-
-		return virt;
+	while (page < e) {
+		__free_page(page);
+		page++;
 	}
-
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_noncached(pgprot_kernel));
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-/*
- * Allocate a writecombining region, in much the same way as
- * dma_alloc_coherent above.
- */
-void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
-{
-	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_writecombine(pgprot_kernel));
-}
-EXPORT_SYMBOL(dma_alloc_writecombine);
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	int ret = -ENXIO;
 #ifdef CONFIG_MMU
-	unsigned long flags, user_size, kern_size;
-	struct arm_vm_region *c;
-
-	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	if (c) {
-		unsigned long off = vma->vm_pgoff;
-
-		kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
-
-		if (off < kern_size &&
-		    user_size <= (kern_size - off)) {
-			ret = remap_pfn_range(vma, vma->vm_start,
-					      page_to_pfn(c->vm_pages) + off,
-					      user_size << PAGE_SHIFT,
-					      vma->vm_page_prot);
-		}
-	}
-#endif	/* CONFIG_MMU */
-
-	return ret;
-}
-
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
 /*
- * free a page as defined by the above mapping.
- * Must not be called with IRQs disabled.
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
-#ifdef CONFIG_MMU
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-	struct arm_vm_region *c;
-	unsigned long flags, addr;
-	pte_t *ptep;
-	int idx;
-	u32 off;
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
 
-	WARN_ON(irqs_disabled());
+#include "vmregion.h"
 
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-		return;
+static struct arm_vmregion_head consistent_head = {
+	.vm_lock	= __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
 
-	if (arch_is_coherent()) {
-		kfree(cpu_addr);
-		return;
-	}
-
-	size = PAGE_ALIGN(size);
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	if (!c)
-		goto no_area;
-
-	c->vm_active = 0;
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	if ((c->vm_end - c->vm_start) != size) {
-		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-		       __func__, c->vm_end - c->vm_start, size);
-		dump_stack();
-		size = c->vm_end - c->vm_start;
-	}
-
-	idx = CONSISTENT_PTE_INDEX(c->vm_start);
-	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-	ptep = consistent_pte[idx] + off;
-	addr = c->vm_start;
-	do {
-		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-		unsigned long pfn;
-
-		ptep++;
-		addr += PAGE_SIZE;
-		off++;
-		if (off >= PTRS_PER_PTE) {
-			off = 0;
-			ptep = consistent_pte[++idx];
-		}
-
-		if (!pte_none(pte) && pte_present(pte)) {
-			pfn = pte_pfn(pte);
-
-			if (pfn_valid(pfn)) {
-				struct page *page = pfn_to_page(pfn);
-
-				/*
-				 * x86 does not mark the pages reserved...
-				 */
-				ClearPageReserved(page);
-
-				__free_page(page);
-				continue;
-			}
-		}
-
-		printk(KERN_CRIT "%s: bad page in kernel page table\n",
-		       __func__);
-	} while (size -= PAGE_SIZE);
-
-	flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	list_del(&c->vm_list);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	kfree(c);
-	return;
-
- no_area:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-	       __func__, cpu_addr);
-	dump_stack();
-}
-#else	/* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-		return;
-	kfree(cpu_addr);
-}
-#endif	/* CONFIG_MMU */
-EXPORT_SYMBOL(dma_free_coherent);
+#ifdef CONFIG_HUGETLB_PAGE
+#error ARM Coherent DMA allocator does not (yet) support huge TLB
+#endif
 
 /*
  * Initialise the consistent memory allocation.
@@ -499,7 +150,6 @@
 static int __init consistent_init(void)
 {
 	int ret = 0;
-#ifdef CONFIG_MMU
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
@@ -526,13 +176,228 @@
 		consistent_pte[i++] = pte;
 		base += (1 << PGDIR_SHIFT);
 	} while (base < CONSISTENT_END);
-#endif	/* !CONFIG_MMU */
 
 	return ret;
 }
 
 core_initcall(consistent_init);
 
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
+{
+	struct arm_vmregion *c;
+
+	if (!consistent_pte[0]) {
+		printk(KERN_ERR "%s: not initialised\n", __func__);
+		dump_stack();
+		return NULL;
+	}
+
+	/*
+	 * Allocate a virtual address in the consistent mapping region.
+	 */
+	c = arm_vmregion_alloc(&consistent_head, size,
+			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+	if (c) {
+		pte_t *pte;
+		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
+		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+
+		pte = consistent_pte[idx] + off;
+		c->vm_pages = page;
+
+		do {
+			BUG_ON(!pte_none(*pte));
+
+			set_pte_ext(pte, mk_pte(page, prot), 0);
+			page++;
+			pte++;
+			off++;
+			if (off >= PTRS_PER_PTE) {
+				off = 0;
+				pte = consistent_pte[++idx];
+			}
+		} while (size -= PAGE_SIZE);
+
+		return (void *)c->vm_start;
+	}
+	return NULL;
+}
+
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+	struct arm_vmregion *c;
+	unsigned long addr;
+	pte_t *ptep;
+	int idx;
+	u32 off;
+
+	c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+	if (!c) {
+		printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+		       __func__, cpu_addr);
+		dump_stack();
+		return;
+	}
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	idx = CONSISTENT_PTE_INDEX(c->vm_start);
+	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+	ptep = consistent_pte[idx] + off;
+	addr = c->vm_start;
+	do {
+		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+
+		ptep++;
+		addr += PAGE_SIZE;
+		off++;
+		if (off >= PTRS_PER_PTE) {
+			off = 0;
+			ptep = consistent_pte[++idx];
+		}
+
+		if (pte_none(pte) || !pte_present(pte))
+			printk(KERN_CRIT "%s: bad page in kernel page table\n",
+			       __func__);
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	arm_vmregion_free(&consistent_head, c);
+}
+
+#else	/* !CONFIG_MMU */
+
+#define __dma_alloc_remap(page, size, gfp, prot)	page_address(page)
+#define __dma_free_remap(addr, size)			do { } while (0)
+
+#endif	/* CONFIG_MMU */
+
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+	    pgprot_t prot)
+{
+	struct page *page;
+	void *addr;
+
+	*handle = ~0;
+	size = PAGE_ALIGN(size);
+
+	page = __dma_alloc_buffer(dev, size, gfp);
+	if (!page)
+		return NULL;
+
+	if (!arch_is_coherent())
+		addr = __dma_alloc_remap(page, size, gfp, prot);
+	else
+		addr = page_address(page);
+
+	if (addr)
+		*handle = page_to_dma(dev, page);
+
+	return addr;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
+	return __dma_alloc(dev, size, handle, gfp,
+			   pgprot_dmacoherent(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Allocate a writecombining region, in much the same way as
+ * dma_alloc_coherent above.
+ */
+void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	return __dma_alloc(dev, size, handle, gfp,
+			   pgprot_writecombine(pgprot_kernel));
+}
+EXPORT_SYMBOL(dma_alloc_writecombine);
+
+static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
+		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	int ret = -ENXIO;
+#ifdef CONFIG_MMU
+	unsigned long user_size, kern_size;
+	struct arm_vmregion *c;
+
+	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+
+	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
+	if (c) {
+		unsigned long off = vma->vm_pgoff;
+
+		kern_size = (c->vm_end - c->vm_start) >> PAGE_SHIFT;
+
+		if (off < kern_size &&
+		    user_size <= (kern_size - off)) {
+			ret = remap_pfn_range(vma, vma->vm_start,
+					      page_to_pfn(c->vm_pages) + off,
+					      user_size << PAGE_SHIFT,
+					      vma->vm_page_prot);
+		}
+	}
+#endif	/* CONFIG_MMU */
+
+	return ret;
+}
+
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
+	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_coherent);
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+EXPORT_SYMBOL(dma_mmap_writecombine);
+
+/*
+ * free a page as defined by the above mapping.
+ * Must not be called with IRQs disabled.
+ */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+	WARN_ON(irqs_disabled());
+
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+
+	size = PAGE_ALIGN(size);
+
+	if (!arch_is_coherent())
+		__dma_free_remap(cpu_addr, size);
+
+	__dma_free_buffer(dma_to_page(dev, handle), size);
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
 /*
  * Make an area consistent for devices.
  * Note: Drivers should NOT use this function directly, as it will break
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6..7296022 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+#include "mm.h"
+
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
 /*
@@ -151,7 +153,14 @@
 	if (!pfn_valid(pfn))
 		return;
 
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
 	page = pfn_to_page(pfn);
+	if (page == ZERO_PAGE(0))
+		return;
+
 	mapping = page_mapping(page);
 #ifndef CONFIG_SMP
 	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7f294f3..329594e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -35,14 +35,12 @@
 	    :
 	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
-	__flush_icache_all();
 }
 
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
-			__cpuc_flush_user_all();
+		vivt_flush_cache_mm(mm);
 		return;
 	}
 
@@ -52,16 +50,13 @@
 		    :
 		    : "r" (0)
 		    : "cc");
-		__flush_icache_all();
 	}
 }
 
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
-			__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-						vma->vm_flags);
+		vivt_flush_cache_range(vma, start, end);
 		return;
 	}
 
@@ -71,22 +66,26 @@
 		    :
 		    : "r" (0)
 		    : "cc");
-		__flush_icache_all();
 	}
+
+	if (vma->vm_flags & VM_EXEC)
+		__flush_icache_all();
 }
 
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = user_addr & PAGE_MASK;
-			__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-		}
+		vivt_flush_cache_page(vma, user_addr, pfn);
 		return;
 	}
 
-	if (cache_is_vipt_aliasing())
+	if (cache_is_vipt_aliasing()) {
 		flush_pfn_alias(pfn, user_addr);
+		__flush_icache_all();
+	}
+
+	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+		__flush_icache_all();
 }
 
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -94,15 +93,13 @@
 			 unsigned long len, int write)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = (unsigned long)kaddr;
-			__cpuc_coherent_kern_range(addr, addr + len);
-		}
+		vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
 		return;
 	}
 
 	if (cache_is_vipt_aliasing()) {
 		flush_pfn_alias(page_to_pfn(page), uaddr);
+		__flush_icache_all();
 		return;
 	}
 
@@ -120,6 +117,8 @@
 
 void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
+	void *addr = page_address(page);
+
 	/*
 	 * Writeback any data associated with the kernel mapping of this
 	 * page.  This ensures that data in the physical page is mutually
@@ -130,9 +129,9 @@
 	 * kmap_atomic() doesn't set the page virtual address, and
 	 * kunmap_atomic() takes care of cache flushing already.
 	 */
-	if (page_address(page))
+	if (addr)
 #endif
-		__cpuc_flush_dcache_page(page_address(page));
+		__cpuc_flush_dcache_page(addr);
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
@@ -196,7 +195,16 @@
  */
 void flush_dcache_page(struct page *page)
 {
-	struct address_space *mapping = page_mapping(page);
+	struct address_space *mapping;
+
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
+	if (page == ZERO_PAGE(0))
+		return;
+
+	mapping = page_mapping(page);
 
 #ifndef CONFIG_SMP
 	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -242,6 +250,7 @@
 		 * userspace address only.
 		 */
 		flush_pfn_alias(pfn, vmaddr);
+		__flush_icache_all();
 	}
 
 	/*
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05..a888363 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@
 
 const struct mem_type *get_mem_type(unsigned int type);
 
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
 #endif
 
 struct map_desc;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0..8c7fbd1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -881,7 +881,7 @@
 				BOOTMEM_EXCLUSIVE);
 	}
 
-	if (machine_is_treo680()) {
+	if (machine_is_treo680() || machine_is_centro()) {
 		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
@@ -1036,7 +1036,7 @@
 	 */
 	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
-	flush_dcache_page(empty_zero_page);
+	__flush_dcache_page(NULL, empty_zero_page);
 }
 
 /*
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 70f75d2..5485c82 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -130,9 +130,16 @@
 
 
 
-
+	.type	cpu_v6_name, #object
 cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
+	.size	cpu_v6_name, . - cpu_v6_name
+
+	.type	cpu_pj4_name, #object
+cpu_pj4_name:
+	.asciz	"Marvell PJ4 processor"
+	.size	cpu_pj4_name, . - cpu_pj4_name
+
 	.align
 
 	__INIT
@@ -241,3 +248,27 @@
 	.long	v6_user_fns
 	.long	v6_cache_fns
 	.size	__v6_proc_info, . - __v6_proc_info
+
+	.type	__pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+	.long	0x560f5810
+	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v6_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pj4_name
+	.long	v6_processor_functions
+	.long	v6wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v6_cache_fns
+	.size	__pj4_v6_proc_info, . - __pj4_v6_proc_info
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 2028f37..fab134e 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -396,7 +396,7 @@
 	orr	r4, r4, #0x18			@ cache the page table in L2
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
-	mov	r0, #0				@ don't allow CP access
+	mov	r0, #1 << 6			@ cp6 access for early sched_clock
 	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 0000000..19e09bdb
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include "vmregion.h"
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vmregion	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ *  struct vmregion vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct arm_vmregion *c, *new;
+
+	if (head->vm_end - head->vm_start < size) {
+		printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+			__func__, size);
+		goto out;
+	}
+
+	new = kmalloc(sizeof(struct arm_vmregion), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+	new->vm_active = 1;
+
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_active && c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	c = __arm_vmregion_find(head, addr);
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return c;
+}
+
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	c = __arm_vmregion_find(head, addr);
+	if (c)
+		c->vm_active = 0;
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return c;
+}
+
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	list_del(&c->vm_list);
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+
+	kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 0000000..6b2cdbd
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct page;
+
+struct arm_vmregion_head {
+	spinlock_t		vm_lock;
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+struct arm_vmregion {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+	struct page		*vm_pages;
+	int			vm_active;
+};
+
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+
+#endif
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 8da95d5..6c8a02a 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -19,6 +19,8 @@
 #include <linux/init.h>
 #include <linux/timex.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -26,45 +28,136 @@
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
-static unsigned long ticks_per_jiffy;
-static unsigned long ticks_per_usec;
-static unsigned long next_jiffy_time;
-
-unsigned long iop_gettimeoffset(void)
+/*
+ * IOP clocksource (free-running timer 1).
+ */
+static cycle_t iop_clocksource_read(struct clocksource *unused)
 {
-	unsigned long offset, temp;
+	return 0xffffffffu - read_tcr1();
+}
 
-	/* enable cp6, if necessary, to avoid taking the overhead of an
-	 * undefined instruction trap
-	 */
-	asm volatile (
-	"mrc	p15, 0, %0, c15, c1, 0\n\t"
-	"tst	%0, #(1 << 6)\n\t"
-	"orreq	%0, %0, #(1 << 6)\n\t"
-	"mcreq	p15, 0, %0, c15, c1, 0\n\t"
-#ifdef CONFIG_CPU_XSCALE
-	"mrceq	p15, 0, %0, c15, c1, 0\n\t"
-	"moveq	%0, %0\n\t"
-	"subeq	pc, pc, #4\n\t"
-#endif
-	: "=r"(temp) : : "cc");
+static struct clocksource iop_clocksource = {
+	.name 		= "iop_timer1",
+	.rating		= 300,
+	.read		= iop_clocksource_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
 
-	offset = next_jiffy_time - read_tcr1();
+static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
+{
+	u64 temp;
+	u32 shift;
 
-	return offset / ticks_per_usec;
+	/* Find shift and mult values for hz. */
+	shift = 32;
+	do {
+		temp = (u64) NSEC_PER_SEC << shift;
+		do_div(temp, hz);
+		if ((temp >> 32) == 0)
+			break;
+	} while (--shift != 0);
+
+	cs->shift = shift;
+	cs->mult = (u32) temp;
+
+	printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
+	       cs->name, cs->shift, cs->mult);
+}
+
+/*
+ * IOP sched_clock() implementation via its clocksource.
+ */
+unsigned long long sched_clock(void)
+{
+	cycle_t cyc = iop_clocksource_read(NULL);
+	struct clocksource *cs = &iop_clocksource;
+
+	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
+ * IOP clockevents (interrupting timer 0).
+ */
+static int iop_set_next_event(unsigned long delta,
+			      struct clock_event_device *unused)
+{
+	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
+
+	BUG_ON(delta == 0);
+	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
+	write_tcr0(delta);
+	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
+
+	return 0;
+}
+
+static unsigned long ticks_per_jiffy;
+
+static void iop_set_mode(enum clock_event_mode mode,
+			 struct clock_event_device *unused)
+{
+	u32 tmr = read_tmr0();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		write_tmr0(tmr & ~IOP_TMR_EN);
+		write_tcr0(ticks_per_jiffy - 1);
+		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* ->set_next_event sets period and enables timer */
+		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		tmr |= IOP_TMR_EN;
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	default:
+		tmr &= ~IOP_TMR_EN;
+		break;
+	}
+
+	write_tmr0(tmr);
+}
+
+static struct clock_event_device iop_clockevent = {
+	.name		= "iop_timer0",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating         = 300,
+	.set_next_event	= iop_set_next_event,
+	.set_mode	= iop_set_mode,
+};
+
+static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find shift and mult values for hz. */
+	shift = 32;
+	do {
+		temp = (u64) hz << shift;
+		do_div(temp, NSEC_PER_SEC);
+		if ((temp >> 32) == 0)
+			break;
+	} while (--shift != 0);
+
+	ce->shift = shift;
+	ce->mult = (u32) temp;
+
+	printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
+	       ce->name, ce->shift, ce->mult);
 }
 
 static irqreturn_t
 iop_timer_interrupt(int irq, void *dev_id)
 {
+	struct clock_event_device *evt = dev_id;
+
 	write_tisr(1);
-
-	while ((signed long)(next_jiffy_time - read_tcr1())
-		>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
-
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -72,6 +165,7 @@
 	.name		= "IOP Timer Tick",
 	.handler	= iop_timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.dev_id		= &iop_clockevent,
 };
 
 static unsigned long iop_tick_rate;
@@ -86,21 +180,33 @@
 	u32 timer_ctl;
 
 	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	ticks_per_usec = tick_rate / 1000000;
-	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
 
 	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
 			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
 
 	/*
-	 * We use timer 0 for our timer interrupt, and timer 1 as
-	 * monotonic counter for tracking missed jiffies.
+	 * Set up interrupting clockevent timer 0.
 	 */
-	write_trr0(ticks_per_jiffy - 1);
-	write_tmr0(timer_ctl);
-	write_trr1(0xffffffff);
-	write_tmr1(timer_ctl);
-
+	write_tmr0(timer_ctl & ~IOP_TMR_EN);
 	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+	iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+	iop_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
+	iop_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xf, &iop_clockevent);
+	iop_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&iop_clockevent);
+	write_trr0(ticks_per_jiffy - 1);
+	write_tcr0(ticks_per_jiffy - 1);
+	write_tmr0(timer_ctl);
+
+	/*
+	 * Set up free-running clocksource timer 1.
+	 */
+	write_trr1(0xffffffff);
+	write_tcr1(0xffffffff);
+	write_tmr1(timer_ctl);
+	iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+	clocksource_register(&iop_clocksource);
 }
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ca5c7c2..8b0a1ee 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -69,10 +69,20 @@
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_ULPI
+	bool
+
 config ARCH_HAS_RNGA
 	bool
 	depends on ARCH_MXC
 
 config ARCH_MXC_IOMUX_V3
 	bool
+
+config ARCH_MXC_AUDMUX_V1
+	bool
+
+config ARCH_MXC_AUDMUX_V2
+	bool
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e3212c8..4cbca9d 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,3 +9,6 @@
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
new file mode 100644
index 0000000..da6387d
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static void __iomem *audmux_base;
+
+static unsigned char port_mapping[] = {
+	0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
+};
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+	if (!audmux_base) {
+		printk("%s: not configured\n", __func__);
+		return -ENOSYS;
+	}
+
+	if (port >= ARRAY_SIZE(port_mapping))
+		return -EINVAL;
+
+	writel(pcr, audmux_base + port_mapping[port]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
+
+static int mxc_audmux_v1_init(void)
+{
+	if (cpu_is_mx27() || cpu_is_mx21())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v1_init);
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
new file mode 100644
index 0000000..6f21096
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static struct clk *audmux_clk;
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
+#define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr)
+{
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+
+static int mxc_audmux_v2_init(void)
+{
+	int ret;
+
+	if (cpu_is_mx35()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+	}
+
+	if (cpu_is_mx31() || cpu_is_mx35())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v2_init);
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 7764643..9c1b3f9 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -156,7 +156,8 @@
 	}
 
 	now = min(imxdma->resbytes, sg->length);
-	imxdma->resbytes -= now;
+	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
 		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index cfc4a8b..d65ebe3 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -282,7 +282,7 @@
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
 			set_irq_chip(j, &gpio_irq_chip);
-			set_irq_handler(j, handle_edge_irq);
+			set_irq_handler(j, handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
 
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
new file mode 100644
index 0000000..5cd6466
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -0,0 +1,52 @@
+#ifndef __MACH_AUDMUX_H
+#define __MACH_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0		0
+#define MX27_AUDMUX_HPCR2_SSI1		1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
+
+#define MX31_AUDMUX_PORT1_SSI0		0
+#define MX31_AUDMUX_PORT2_SSI1		1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
+#define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
+#define MXC_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
+#define MXC_AUDMUX_V1_PCR_SYN		(1 << 12)
+#define MXC_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
+#define MXC_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
+#define MXC_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
+#define MXC_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
+#define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
+#define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
+
+/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
+#define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
+#define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
+#define MXC_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
+#define MXC_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
+#define MXC_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
+#define MXC_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
+#define MXC_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
+#define MXC_AUDMUX_V2_PTCR_SYN		(1 << 11)
+
+#define MXC_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
+#define MXC_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
+#define MXC_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr);
+
+#endif /* __MACH_AUDMUX_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
new file mode 100644
index 0000000..05ff2f3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
+#define __ARM_ARCH_BOARD_KZM_ARM11_H
+
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+
+#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 8e64325..0184b63 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -1,15 +1,42 @@
 /*
  * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
  */
 
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
+#ifndef __ASSEMBLY__
 
+enum mx31lilly_boards {
+	MX31LITE_NOBOARD	= 0,
+	MX31LITE_DB		= 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lite_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index b3876cc..07be8ad 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -58,6 +58,14 @@
 		unsigned int dma_length, unsigned int dev_addr,
 		unsigned int dmamode);
 
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 446f867..eaabd4e 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -524,10 +524,18 @@
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DCE1__DCD_DCE1	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RI_DCE1__RI_DCE1	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DSR_DCE1__DSR_DCE1	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__DTR_DCE1	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD2__RXD2		IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__DCD_DTE2	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RI_DTE1__RI_DTE2	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DSR_DTE1__DSR_DTE2	IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DTR_DTE1__DTR_DTE2	IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
 #define MX31_PIN_PC_RST__CTS5		IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_PC_VS2__RTS5		IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_PC_BVD2__TXD5		IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
@@ -623,6 +631,8 @@
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
@@ -642,12 +652,22 @@
 #define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -693,7 +713,19 @@
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-
+#define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CTS1__GPIO2_7		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_LCS0__GPIO3_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD4__STXD4		IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD4__SRXD4		IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK4__SCK4		IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS4__SFS4		IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD5__STXD5		IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index a0fa402..1deda01 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -88,9 +88,7 @@
 #define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
- * setups a single pad:
- * 	- reserves the pad so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
 
@@ -101,19 +99,6 @@
 int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
 
 /*
- * releases a single pad:
- * 	- make it available for a future use by another driver
- * 	- DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_v3_release_pad(struct pad_desc *pad);
-
-/*
- * releases multiple pads
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
-
-/*
  * Initialise the iomux controller
  */
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 6d49f8a..011cfcd 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -123,6 +123,7 @@
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
 #define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
 
 
 extern void mxc_gpio_mode(int gpio_mode);
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 21112c6..bb297d8 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,46 +25,191 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
-/* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xC0000000
-#define CSD1_BASE_ADDR          0xC4000000
+#define MX21_AIPI_BASE_ADDR		0x10000000
+#define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX21_AIPI_SIZE			SZ_1M
+#define MX21_DMA_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_AUDMUX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3f000)
 
-#define CS0_BASE_ADDR           0xC8000000
-#define CS1_BASE_ADDR           0xCC000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD1000000
-#define CS4_BASE_ADDR           0xD2000000
-#define CS5_BASE_ADDR           0xDD000000
-#define PCMCIA_MEM_BASE_ADDR    0xD4000000
+#define MX21_AVIC_BASE_ADDR		0x10040000
+
+#define MX21_SAHB1_BASE_ADDR		0x80000000
+#define MX21_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX21_SAHB1_SIZE			SZ_1M
+#define MX21_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
+
+/* Memory regions and CS */
+#define MX21_SDRAM_BASE_ADDR		0xc0000000
+#define MX21_CSD1_BASE_ADDR		0xc4000000
+
+#define MX21_CS0_BASE_ADDR		0xc8000000
+#define MX21_CS1_BASE_ADDR		0xcc000000
+#define MX21_CS2_BASE_ADDR		0xd0000000
+#define MX21_CS3_BASE_ADDR		0xd1000000
+#define MX21_CS4_BASE_ADDR		0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR	0xd4000000
+#define MX21_CS5_BASE_ADDR		0xdd000000
 
 /* NAND, SDRAM, WEIM etc controllers */
-#define X_MEMC_BASE_ADDR        0xDF000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_256K
+#define MX21_X_MEMC_BASE_ADDR		0xdf000000
+#define MX21_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX21_X_MEMC_SIZE		SZ_256K
 
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x0000)
-#define EIM_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x1000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x2000)
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x3000)
+#define MX21_SDRAMC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR	(MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x3000)
 
-#define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
+#define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBMNP          57
-#define MXC_INT_USBFUNC         56
-#define MXC_INT_USBHOST         55
-#define MXC_INT_USBDMA          54
-#define MXC_INT_USBWKUP         53
-#define MXC_INT_EMMADEC         50
-#define MXC_INT_EMMAENC         49
-#define MXC_INT_BMI             30
-#define MXC_INT_FIRI            9
+#define MX21_INT_CSPI3		6
+#define MX21_INT_GPIO		8
+#define MX21_INT_FIRI		9
+#define MX21_INT_SDHC2		10
+#define MX21_INT_SDHC1		11
+#define MX21_INT_I2C		12
+#define MX21_INT_SSI2		13
+#define MX21_INT_SSI1		14
+#define MX21_INT_CSPI2		15
+#define MX21_INT_CSPI1		16
+#define MX21_INT_UART4		17
+#define MX21_INT_UART3		18
+#define MX21_INT_UART2		19
+#define MX21_INT_UART1		20
+#define MX21_INT_KPP		21
+#define MX21_INT_RTC		22
+#define MX21_INT_PWM		23
+#define MX21_INT_GPT3		24
+#define MX21_INT_GPT2		25
+#define MX21_INT_GPT1		26
+#define MX21_INT_WDOG		27
+#define MX21_INT_PCMCIA		28
+#define MX21_INT_NANDFC		29
+#define MX21_INT_BMI		30
+#define MX21_INT_CSI		31
+#define MX21_INT_DMACH0		32
+#define MX21_INT_DMACH1		33
+#define MX21_INT_DMACH2		34
+#define MX21_INT_DMACH3		35
+#define MX21_INT_DMACH4		36
+#define MX21_INT_DMACH5		37
+#define MX21_INT_DMACH6		38
+#define MX21_INT_DMACH7		39
+#define MX21_INT_DMACH8		40
+#define MX21_INT_DMACH9		41
+#define MX21_INT_DMACH10	42
+#define MX21_INT_DMACH11	43
+#define MX21_INT_DMACH12	44
+#define MX21_INT_DMACH13	45
+#define MX21_INT_DMACH14	46
+#define MX21_INT_DMACH15	47
+#define MX21_INT_EMMAENC	49
+#define MX21_INT_EMMADEC	50
+#define MX21_INT_EMMAPRP	51
+#define MX21_INT_EMMAPP		52
+#define MX21_INT_USBWKUP	53
+#define MX21_INT_USBDMA		54
+#define MX21_INT_USBHOST	55
+#define MX21_INT_USBFUNC	56
+#define MX21_INT_USBMNP		57
+#define MX21_INT_USBCTRL	58
+#define MX21_INT_SLCDC		60
+#define MX21_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_BMI_RX          29
-#define DMA_REQ_BMI_TX          28
-#define DMA_REQ_FIRI_RX         4
+#define MX21_DMA_REQ_CSPI3_RX	1
+#define MX21_DMA_REQ_CSPI3_TX	2
+#define MX21_DMA_REQ_EXT	3
+#define MX21_DMA_REQ_FIRI_RX	4
+#define MX21_DMA_REQ_SDHC2	6
+#define MX21_DMA_REQ_SDHC1	7
+#define MX21_DMA_REQ_SSI2_RX0	8
+#define MX21_DMA_REQ_SSI2_TX0	9
+#define MX21_DMA_REQ_SSI2_RX1	10
+#define MX21_DMA_REQ_SSI2_TX1	11
+#define MX21_DMA_REQ_SSI1_RX0	12
+#define MX21_DMA_REQ_SSI1_TX0	13
+#define MX21_DMA_REQ_SSI1_RX1	14
+#define MX21_DMA_REQ_SSI1_TX1	15
+#define MX21_DMA_REQ_CSPI2_RX	16
+#define MX21_DMA_REQ_CSPI2_TX	17
+#define MX21_DMA_REQ_CSPI1_RX	18
+#define MX21_DMA_REQ_CSPI1_TX	19
+#define MX21_DMA_REQ_UART4_RX	20
+#define MX21_DMA_REQ_UART4_TX	21
+#define MX21_DMA_REQ_UART3_RX	22
+#define MX21_DMA_REQ_UART3_TX	23
+#define MX21_DMA_REQ_UART2_RX	24
+#define MX21_DMA_REQ_UART2_TX	25
+#define MX21_DMA_REQ_UART1_RX	26
+#define MX21_DMA_REQ_UART1_TX	27
+#define MX21_DMA_REQ_BMI_TX	28
+#define MX21_DMA_REQ_BMI_RX	29
+#define MX21_DMA_REQ_CSI_STAT	30
+#define MX21_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
+#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX21_X_MEMC_SIZE
+#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
+#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
+#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
+#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
+#define MXC_INT_FIRI MX21_INT_FIRI
+#define MXC_INT_BMI MX21_INT_BMI
+#define MXC_INT_EMMAENC MX21_INT_EMMAENC
+#define MXC_INT_EMMADEC MX21_INT_EMMADEC
+#define MXC_INT_USBWKUP MX21_INT_USBWKUP
+#define MXC_INT_USBDMA MX21_INT_USBDMA
+#define MXC_INT_USBHOST MX21_INT_USBHOST
+#define MXC_INT_USBFUNC MX21_INT_USBFUNC
+#define MXC_INT_USBMNP MX21_INT_USBMNP
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
+#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
+#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
 
 #endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index ec64bd9..91e7381 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -1,14 +1,14 @@
 #ifndef __MACH_MX25_H__
 #define __MACH_MX25_H__
 
-#define MX25_AIPS1_BASE_ADDR		0x43F00000
-#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_BASE_ADDR		0x43f00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX25_AIPS1_SIZE			SZ_1M
-#define MX25_AIPS2_BASE_ADDR		0x53F00000
-#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_BASE_ADDR		0x53f00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX25_AIPS2_SIZE			SZ_1M
 #define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index dc3ad9a..e2ae19f 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,87 +24,198 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-/* IRAM */
-#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
+#define MX27_AIPI_BASE_ADDR		0x10000000
+#define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX27_AIPI_SIZE			SZ_1M
+#define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
+#define MX27_WDOG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x02000)
+#define MX27_GPT1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x03000)
+#define MX27_GPT2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x04000)
+#define MX27_GPT3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x05000)
+#define MX27_PWM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x06000)
+#define MX27_RTC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x07000)
+#define MX27_KPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x08000)
+#define MX27_OWIRE_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x09000)
+#define MX27_UART1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0a000)
+#define MX27_UART2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0b000)
+#define MX27_UART3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0c000)
+#define MX27_UART4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0d000)
+#define MX27_CSPI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0e000)
+#define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
+#define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
+#define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
+#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
+#define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
+#define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
+#define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
+#define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
+#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_UART5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1b000)
+#define MX27_UART6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1c000)
+#define MX27_I2C2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1d000)
+#define MX27_SDHC3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1e000)
+#define MX27_GPT6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1f000)
+#define MX27_LCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x21000)
+#define MX27_SLCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x22000)
+#define MX27_VPU_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x23000)
+#define MX27_USBOTG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_OTG_BASE_ADDR			MX27_USBOTG_BASE_ADDR
+#define MX27_SAHARA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x25000)
+#define MX27_EMMA_PP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMA_PRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_CCM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27000)
+#define MX27_SYSCTRL_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27800)
+#define MX27_IIM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x28000)
+#define MX27_RTIC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2a000)
+#define MX27_FEC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2b000)
+#define MX27_SCC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2c000)
+#define MX27_ETB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3b000)
+#define MX27_ETB_RAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3c000)
+#define MX27_JAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3e000)
+#define MX27_MAX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3f000)
 
-#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
-#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
-#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
-#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
-#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
-#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
-#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
-#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
-#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
-#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
-#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
-#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
-#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
+#define MX27_AVIC_BASE_ADDR		0x10040000
 
 /* ROM patch */
-#define ROMP_BASE_ADDR          0x10041000
+#define MX27_ROMP_BASE_ADDR		0x10041000
 
-#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
+#define MX27_SAHB1_BASE_ADDR		0x80000000
+#define MX27_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX27_SAHB1_SIZE			SZ_1M
+#define MX27_CSI_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x0000)
+#define MX27_ATA_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x1000)
 
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xA0000000
-#define CSD1_BASE_ADDR          0xB0000000
+#define MX27_SDRAM_BASE_ADDR		0xa0000000
+#define MX27_CSD1_BASE_ADDR		0xb0000000
 
-#define CS0_BASE_ADDR           0xC0000000
-#define CS1_BASE_ADDR           0xC8000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD2000000
-#define CS4_BASE_ADDR           0xD4000000
-#define CS5_BASE_ADDR           0xD6000000
-#define PCMCIA_MEM_BASE_ADDR    0xDC000000
+#define MX27_CS0_BASE_ADDR		0xc0000000
+#define MX27_CS1_BASE_ADDR		0xc8000000
+#define MX27_CS2_BASE_ADDR		0xd0000000
+#define MX27_CS3_BASE_ADDR		0xd2000000
+#define MX27_CS4_BASE_ADDR		0xd4000000
+#define MX27_CS5_BASE_ADDR		0xd6000000
 
 /* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
+#define MX27_X_MEMC_BASE_ADDR		0xd8000000
+#define MX27_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX27_X_MEMC_SIZE		SZ_1M
+#define MX27_NFC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR)
+#define MX27_SDRAMC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x1000)
+#define MX27_WEIM_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x2000)
+#define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
+#define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
+
+/* IRAM */
+#define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_CCM		63
-#define MXC_INT_IIM		62
-#define MXC_INT_SAHARA		59
-#define MXC_INT_SCC_SCM		58
-#define MXC_INT_SCC_SMN		57
-#define MXC_INT_USB3		56
-#define MXC_INT_USB2		55
-#define MXC_INT_USB1		54
-#define MXC_INT_VPU		53
-#define MXC_INT_FEC		50
-#define MXC_INT_UART5		49
-#define MXC_INT_UART6		48
-#define MXC_INT_ATA		30
-#define MXC_INT_SDHC3		9
-#define MXC_INT_SDHC		7
-#define MXC_INT_RTIC		5
-#define MXC_INT_GPT4		4
-#define MXC_INT_GPT5		3
-#define MXC_INT_GPT6		2
-#define MXC_INT_I2C2		1
+#define MX27_INT_I2C2		1
+#define MX27_INT_GPT6		2
+#define MX27_INT_GPT5		3
+#define MX27_INT_GPT4		4
+#define MX27_INT_RTIC		5
+#define MX27_INT_CSPI3		6
+#define MX27_INT_SDHC		7
+#define MX27_INT_GPIO		8
+#define MX27_INT_SDHC3		9
+#define MX27_INT_SDHC2		10
+#define MX27_INT_SDHC1		11
+#define MX27_INT_I2C		12
+#define MX27_INT_SSI2		13
+#define MX27_INT_SSI1		14
+#define MX27_INT_CSPI2		15
+#define MX27_INT_CSPI1		16
+#define MX27_INT_UART4		17
+#define MX27_INT_UART3		18
+#define MX27_INT_UART2		19
+#define MX27_INT_UART1		20
+#define MX27_INT_KPP		21
+#define MX27_INT_RTC		22
+#define MX27_INT_PWM		23
+#define MX27_INT_GPT3		24
+#define MX27_INT_GPT2		25
+#define MX27_INT_GPT1		26
+#define MX27_INT_WDOG		27
+#define MX27_INT_PCMCIA		28
+#define MX27_INT_NANDFC		29
+#define MX27_INT_ATA		30
+#define MX27_INT_CSI		31
+#define MX27_INT_DMACH0		32
+#define MX27_INT_DMACH1		33
+#define MX27_INT_DMACH2		34
+#define MX27_INT_DMACH3		35
+#define MX27_INT_DMACH4		36
+#define MX27_INT_DMACH5		37
+#define MX27_INT_DMACH6		38
+#define MX27_INT_DMACH7		39
+#define MX27_INT_DMACH8		40
+#define MX27_INT_DMACH9		41
+#define MX27_INT_DMACH10	42
+#define MX27_INT_DMACH11	43
+#define MX27_INT_DMACH12	44
+#define MX27_INT_DMACH13	45
+#define MX27_INT_DMACH14	46
+#define MX27_INT_DMACH15	47
+#define MX27_INT_UART6		48
+#define MX27_INT_UART5		49
+#define MX27_INT_FEC		50
+#define MX27_INT_EMMAPRP	51
+#define MX27_INT_EMMAPP		52
+#define MX27_INT_VPU		53
+#define MX27_INT_USB1		54
+#define MX27_INT_USB2		55
+#define MX27_INT_USB3		56
+#define MX27_INT_SCC_SMN	57
+#define MX27_INT_SCC_SCM	58
+#define MX27_INT_SAHARA		59
+#define MX27_INT_SLCDC		60
+#define MX27_INT_LCDC		61
+#define MX27_INT_IIM		62
+#define MX27_INT_CCM		63
 
 /* fixed DMA request numbers */
-#define DMA_REQ_NFC             37
-#define DMA_REQ_SDHC3           36
-#define DMA_REQ_UART6_RX        35
-#define DMA_REQ_UART6_TX        34
-#define DMA_REQ_UART5_RX        33
-#define DMA_REQ_UART5_TX        32
-#define DMA_REQ_ATA_RCV         29
-#define DMA_REQ_ATA_TX          28
-#define DMA_REQ_MSHC            4
+#define MX27_DMA_REQ_CSPI3_RX	1
+#define MX27_DMA_REQ_CSPI3_TX	2
+#define MX27_DMA_REQ_EXT	3
+#define MX27_DMA_REQ_MSHC	4
+#define MX27_DMA_REQ_SDHC2	6
+#define MX27_DMA_REQ_SDHC1	7
+#define MX27_DMA_REQ_SSI2_RX0	8
+#define MX27_DMA_REQ_SSI2_TX0	9
+#define MX27_DMA_REQ_SSI2_RX1	10
+#define MX27_DMA_REQ_SSI2_TX1	11
+#define MX27_DMA_REQ_SSI1_RX0	12
+#define MX27_DMA_REQ_SSI1_TX0	13
+#define MX27_DMA_REQ_SSI1_RX1	14
+#define MX27_DMA_REQ_SSI1_TX1	15
+#define MX27_DMA_REQ_CSPI2_RX	16
+#define MX27_DMA_REQ_CSPI2_TX	17
+#define MX27_DMA_REQ_CSPI1_RX	18
+#define MX27_DMA_REQ_CSPI1_TX	19
+#define MX27_DMA_REQ_UART4_RX	20
+#define MX27_DMA_REQ_UART4_TX	21
+#define MX27_DMA_REQ_UART3_RX	22
+#define MX27_DMA_REQ_UART3_TX	23
+#define MX27_DMA_REQ_UART2_RX	24
+#define MX27_DMA_REQ_UART2_TX	25
+#define MX27_DMA_REQ_UART1_RX	26
+#define MX27_DMA_REQ_UART1_TX	27
+#define MX27_DMA_REQ_ATA_TX	28
+#define MX27_DMA_REQ_ATA_RCV	29
+#define MX27_DMA_REQ_CSI_STAT	30
+#define MX27_DMA_REQ_CSI_RX	31
+#define MX27_DMA_REQ_UART5_TX	32
+#define MX27_DMA_REQ_UART5_RX	33
+#define MX27_DMA_REQ_UART6_TX	34
+#define MX27_DMA_REQ_UART6_RX	35
+#define MX27_DMA_REQ_SDHC3	36
+#define MX27_DMA_REQ_NFC	37
 
 /* silicon revisions specific to i.MX27 */
 #define CHIP_REV_1_0		0x00
@@ -114,6 +225,72 @@
 extern int mx27_revision(void);
 #endif
 
-/* Mandatory defines used globally */
+/* these should go away */
+#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
+#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
+#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
+#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
+#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
+#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
+#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
+#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
+#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
+#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
+#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
+#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
+#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
+#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
+#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
+#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
+#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
+#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
+#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
+#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
+#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX27_X_MEMC_SIZE
+#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
+#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
+#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
+#define MXC_INT_I2C2 MX27_INT_I2C2
+#define MXC_INT_GPT6 MX27_INT_GPT6
+#define MXC_INT_GPT5 MX27_INT_GPT5
+#define MXC_INT_GPT4 MX27_INT_GPT4
+#define MXC_INT_RTIC MX27_INT_RTIC
+#define MXC_INT_SDHC MX27_INT_SDHC
+#define MXC_INT_SDHC3 MX27_INT_SDHC3
+#define MXC_INT_ATA MX27_INT_ATA
+#define MXC_INT_UART6 MX27_INT_UART6
+#define MXC_INT_UART5 MX27_INT_UART5
+#define MXC_INT_FEC MX27_INT_FEC
+#define MXC_INT_VPU MX27_INT_VPU
+#define MXC_INT_USB1 MX27_INT_USB1
+#define MXC_INT_USB2 MX27_INT_USB2
+#define MXC_INT_USB3 MX27_INT_USB3
+#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
+#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
+#define MXC_INT_SAHARA MX27_INT_SAHARA
+#define MXC_INT_IIM MX27_INT_IIM
+#define MXC_INT_CCM MX27_INT_CCM
+#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
+#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
+#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
+#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
+#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
+#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
+#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
+#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
+#define DMA_REQ_NFC MX27_DMA_REQ_NFC
 
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index db5d921..f2eaf14 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -25,51 +25,49 @@
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
-/* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
+/* Register offsets */
+#define MX2x_AIPI_BASE_ADDR		0x10000000
+#define MX2x_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX2x_AIPI_SIZE			SZ_1M
+#define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
+#define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
+#define MX2x_GPT1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x03000)
+#define MX2x_GPT2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x04000)
+#define MX2x_GPT3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x05000)
+#define MX2x_PWM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x06000)
+#define MX2x_RTC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x07000)
+#define MX2x_KPP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x08000)
+#define MX2x_OWIRE_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x09000)
+#define MX2x_UART1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0a000)
+#define MX2x_UART2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0b000)
+#define MX2x_UART3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0c000)
+#define MX2x_UART4_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0d000)
+#define MX2x_CSPI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0e000)
+#define MX2x_CSPI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0f000)
+#define MX2x_SSI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x10000)
+#define MX2x_SSI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x11000)
+#define MX2x_I2C_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x12000)
+#define MX2x_SDHC1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x13000)
+#define MX2x_SDHC2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x14000)
+#define MX2x_GPIO_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x15000)
+#define MX2x_AUDMUX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x16000)
+#define MX2x_CSPI3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x17000)
+#define MX2x_LCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x21000)
+#define MX2x_SLCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x22000)
+#define MX2x_USBOTG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x24000)
+#define MX2x_EMMA_PP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26000)
+#define MX2x_EMMA_PRP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26400)
+#define MX2x_CCM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27000)
+#define MX2x_SYSCTRL_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27800)
+#define MX2x_JAM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3e000)
+#define MX2x_MAX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3f000)
 
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
+#define MX2x_AVIC_BASE_ADDR		0x10040000
 
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+#define MX2x_SAHB1_BASE_ADDR		0x80000000
+#define MX2x_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX2x_SAHB1_SIZE			SZ_1M
+#define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
 /*
  * This macro defines the physical to virtual address mapping for all the
@@ -105,78 +103,189 @@
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
 /* fixed interrupt numbers */
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
-#define MXC_INT_GPIO		8
-#define MXC_INT_CSPI3		6
+#define MX2x_INT_CSPI3		6
+#define MX2x_INT_GPIO		8
+#define MX2x_INT_SDHC2		10
+#define MX2x_INT_SDHC1		11
+#define MX2x_INT_I2C		12
+#define MX2x_INT_SSI2		13
+#define MX2x_INT_SSI1		14
+#define MX2x_INT_CSPI2		15
+#define MX2x_INT_CSPI1		16
+#define MX2x_INT_UART4		17
+#define MX2x_INT_UART3		18
+#define MX2x_INT_UART2		19
+#define MX2x_INT_UART1		20
+#define MX2x_INT_KPP		21
+#define MX2x_INT_RTC		22
+#define MX2x_INT_PWM		23
+#define MX2x_INT_GPT3		24
+#define MX2x_INT_GPT2		25
+#define MX2x_INT_GPT1		26
+#define MX2x_INT_WDOG		27
+#define MX2x_INT_PCMCIA		28
+#define MX2x_INT_NANDFC		29
+#define MX2x_INT_CSI		31
+#define MX2x_INT_DMACH0		32
+#define MX2x_INT_DMACH1		33
+#define MX2x_INT_DMACH2		34
+#define MX2x_INT_DMACH3		35
+#define MX2x_INT_DMACH4		36
+#define MX2x_INT_DMACH5		37
+#define MX2x_INT_DMACH6		38
+#define MX2x_INT_DMACH7		39
+#define MX2x_INT_DMACH8		40
+#define MX2x_INT_DMACH9		41
+#define MX2x_INT_DMACH10	42
+#define MX2x_INT_DMACH11	43
+#define MX2x_INT_DMACH12	44
+#define MX2x_INT_DMACH13	45
+#define MX2x_INT_DMACH14	46
+#define MX2x_INT_DMACH15	47
+#define MX2x_INT_EMMAPRP	51
+#define MX2x_INT_EMMAPP		52
+#define MX2x_INT_SLCDC		60
+#define MX2x_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
+#define MX2x_DMA_REQ_CSPI3_RX	1
+#define MX2x_DMA_REQ_CSPI3_TX	2
+#define MX2x_DMA_REQ_EXT	3
+#define MX2x_DMA_REQ_SDHC2	6
+#define MX2x_DMA_REQ_SDHC1	7
+#define MX2x_DMA_REQ_SSI2_RX0	8
+#define MX2x_DMA_REQ_SSI2_TX0	9
+#define MX2x_DMA_REQ_SSI2_RX1	10
+#define MX2x_DMA_REQ_SSI2_TX1	11
+#define MX2x_DMA_REQ_SSI1_RX0	12
+#define MX2x_DMA_REQ_SSI1_TX0	13
+#define MX2x_DMA_REQ_SSI1_RX1	14
+#define MX2x_DMA_REQ_SSI1_TX1	15
+#define MX2x_DMA_REQ_CSPI2_RX	16
+#define MX2x_DMA_REQ_CSPI2_TX	17
+#define MX2x_DMA_REQ_CSPI1_RX	18
+#define MX2x_DMA_REQ_CSPI1_TX	19
+#define MX2x_DMA_REQ_UART4_RX	20
+#define MX2x_DMA_REQ_UART4_TX	21
+#define MX2x_DMA_REQ_UART3_RX	22
+#define MX2x_DMA_REQ_UART3_TX	23
+#define MX2x_DMA_REQ_UART2_RX	24
+#define MX2x_DMA_REQ_UART2_TX	25
+#define MX2x_DMA_REQ_UART1_RX	26
+#define MX2x_DMA_REQ_UART1_TX	27
+#define MX2x_DMA_REQ_CSI_STAT	30
+#define MX2x_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
+#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
+#define AIPI_SIZE MX2x_AIPI_SIZE
+#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
+#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
+#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
+#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
+#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
+#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
+#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
+#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
+#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
+#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
+#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
+#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
+#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
+#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
+#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
+#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
+#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
+#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
+#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
+#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
+#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
+#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
+#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
+#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
+#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
+#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
+#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
+#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
+#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
+#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
+#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
+#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
+#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
+#define SAHB1_SIZE MX2x_SAHB1_SIZE
+#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
+#define MXC_INT_CSPI3 MX2x_INT_CSPI3
+#define MXC_INT_GPIO MX2x_INT_GPIO
+#define MXC_INT_SDHC2 MX2x_INT_SDHC2
+#define MXC_INT_SDHC1 MX2x_INT_SDHC1
+#define MXC_INT_I2C MX2x_INT_I2C
+#define MXC_INT_SSI2 MX2x_INT_SSI2
+#define MXC_INT_SSI1 MX2x_INT_SSI1
+#define MXC_INT_CSPI2 MX2x_INT_CSPI2
+#define MXC_INT_CSPI1 MX2x_INT_CSPI1
+#define MXC_INT_UART4 MX2x_INT_UART4
+#define MXC_INT_UART3 MX2x_INT_UART3
+#define MXC_INT_UART2 MX2x_INT_UART2
+#define MXC_INT_UART1 MX2x_INT_UART1
+#define MXC_INT_KPP MX2x_INT_KPP
+#define MXC_INT_RTC MX2x_INT_RTC
+#define MXC_INT_PWM MX2x_INT_PWM
+#define MXC_INT_GPT3 MX2x_INT_GPT3
+#define MXC_INT_GPT2 MX2x_INT_GPT2
+#define MXC_INT_GPT1 MX2x_INT_GPT1
+#define MXC_INT_WDOG MX2x_INT_WDOG
+#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
+#define MXC_INT_NANDFC MX2x_INT_NANDFC
+#define MXC_INT_CSI MX2x_INT_CSI
+#define MXC_INT_DMACH0 MX2x_INT_DMACH0
+#define MXC_INT_DMACH1 MX2x_INT_DMACH1
+#define MXC_INT_DMACH2 MX2x_INT_DMACH2
+#define MXC_INT_DMACH3 MX2x_INT_DMACH3
+#define MXC_INT_DMACH4 MX2x_INT_DMACH4
+#define MXC_INT_DMACH5 MX2x_INT_DMACH5
+#define MXC_INT_DMACH6 MX2x_INT_DMACH6
+#define MXC_INT_DMACH7 MX2x_INT_DMACH7
+#define MXC_INT_DMACH8 MX2x_INT_DMACH8
+#define MXC_INT_DMACH9 MX2x_INT_DMACH9
+#define MXC_INT_DMACH10 MX2x_INT_DMACH10
+#define MXC_INT_DMACH11 MX2x_INT_DMACH11
+#define MXC_INT_DMACH12 MX2x_INT_DMACH12
+#define MXC_INT_DMACH13 MX2x_INT_DMACH13
+#define MXC_INT_DMACH14 MX2x_INT_DMACH14
+#define MXC_INT_DMACH15 MX2x_INT_DMACH15
+#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
+#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
+#define MXC_INT_SLCDC MX2x_INT_SLCDC
+#define MXC_INT_LCDC MX2x_INT_LCDC
+#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
+#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
+#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
+#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
+#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
+#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
+#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
+#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
+#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
+#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
+#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
+#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
+#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
+#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
+#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
+#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
+#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
+#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
+#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
+#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
+#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
+#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
+#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
+#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
+#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
+#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
 
 #endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 14ac0dc..b8b47d1 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,45 +1,218 @@
 /*
  * IRAM
  */
-#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_BASE_ADDR		0x1ffc0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
-#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
-#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
+#define MX31_L2CC_BASE_ADDR		0x30000000
+#define MX31_L2CC_SIZE			SZ_1M
 
-#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
-#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
-#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
+#define MX31_AIPS1_BASE_ADDR		0x43f00000
+#define MX31_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX31_AIPS1_SIZE			SZ_1M
+#define MX31_MAX_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x04000)
+#define MX31_EVTMON_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x08000)
+#define MX31_CLKCTL_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x0c000)
+#define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
+#define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
+#define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
+#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
+#define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
+#define MX31_UART1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x90000)
+#define MX31_UART2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x94000)
+#define MX31_I2C2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x98000)
+#define MX31_OWIRE_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x9c000)
+#define MX31_SSI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa0000)
+#define MX31_CSPI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa4000)
+#define MX31_KPP_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa8000)
+#define MX31_IOMUXC_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xac000)
+#define MX31_UART4_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb0000)
+#define MX31_UART5_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb4000)
+#define MX31_ECT_IP1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb8000)
+#define MX31_ECT_IP2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xbc000)
 
-#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
-#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
-#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
+#define MX31_SPBA0_BASE_ADDR		0x50000000
+#define MX31_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX31_SPBA0_SIZE			SZ_1M
+#define MX31_MMC_SDHC1_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_MMC_SDHC2_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_UART3_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x0c000)
+#define MX31_CSPI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x10000)
+#define MX31_SSI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x14000)
+#define MX31_SIM1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x18000)
+#define MX31_IIM_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x1c000)
+#define MX31_ATA_DMA_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x20000)
+#define MX31_MSHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x24000)
+#define MX31_SPBA_CTRL_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x3c000)
 
-#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_AIPS2_BASE_ADDR		0x53f00000
+#define MX31_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX31_AIPS2_SIZE			SZ_1M
+#define MX31_CCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x80000)
+#define MX31_CSPI3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x84000)
+#define MX31_FIRI_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x8c000)
+#define MX31_GPT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x90000)
+#define MX31_EPIT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x94000)
+#define MX31_EPIT2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x98000)
+#define MX31_GPIO3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xa4000)
+#define MX31_SCC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xac000)
+#define MX31_SCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xae000)
+#define MX31_SMN_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xaf000)
+#define MX31_RNGA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xb0000)
+#define MX31_IPU_CTRL_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc0000)
+#define MX31_AUDMUX_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc4000)
+#define MX31_MPEG4_ENC_BASE_ADDR		(MX31_AIPS2_BASE_ADDR + 0xc8000)
+#define MX31_GPIO1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xcc000)
+#define MX31_GPIO2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd0000)
+#define MX31_SDMA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd4000)
+#define MX31_RTC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd8000)
+#define MX31_WDOG_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xdc000)
+#define MX31_PWM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xe0000)
+#define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
 
-#define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_FIRI		7
+#define MX31_ROMP_BASE_ADDR		0x60000000
+#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX31_ROMP_SIZE			SZ_1M
+
+#define MX31_AVIC_BASE_ADDR		0x68000000
+#define MX31_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX31_AVIC_SIZE			SZ_1M
+
+#define MX31_IPU_MEM_BASE_ADDR		0x70000000
+#define MX31_CSD0_BASE_ADDR		0x80000000
+#define MX31_CSD1_BASE_ADDR		0x90000000
+
+#define MX31_CS0_BASE_ADDR		0xa0000000
+#define MX31_CS1_BASE_ADDR		0xa8000000
+#define MX31_CS2_BASE_ADDR		0xb0000000
+#define MX31_CS3_BASE_ADDR		0xb2000000
+
+#define MX31_CS4_BASE_ADDR		0xb4000000
+#define MX31_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX31_CS4_SIZE			SZ_32M
+
+#define MX31_CS5_BASE_ADDR		0xb6000000
+#define MX31_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS5_SIZE			SZ_32M
+
+#define MX31_X_MEMC_BASE_ADDR		0xb8000000
+#define MX31_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX31_X_MEMC_SIZE		SZ_64K
+#define MX31_NFC_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_ESDCTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x1000)
+#define MX31_WEIM_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x2000)
+#define MX31_M3IF_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x3000)
+#define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
+#define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
+
+#define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
+
+#define MX31_INT_I2C3		3
+#define MX31_INT_I2C2		4
+#define MX31_INT_MPEG4_ENCODER	5
+#define MX31_INT_RTIC		6
+#define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC1	9
+#define MX31_INT_MMC_SDHC1	9
+#define MX31_INT_I2C		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
-#define MXC_INT_MBX		16
-#define MXC_INT_CSPI3		17
-#define MXC_INT_SIM2		20
-#define MXC_INT_SIM1		21
-#define MXC_INT_CCM_DVFS	31
-#define MXC_INT_USB1		35
-#define MXC_INT_USB2		36
-#define MXC_INT_USB3		37
-#define MXC_INT_USB4		38
-#define MXC_INT_MSHC2		40
-#define MXC_INT_UART4		46
-#define MXC_INT_UART5		47
-#define MXC_INT_CCM		53
-#define MXC_INT_PCMCIA		54
+#define MX31_INT_CSPI2		13
+#define MX31_INT_CSPI1		14
+#define MX31_INT_ATA		15
+#define MX31_INT_MBX		16
+#define MX31_INT_CSPI3		17
+#define MX31_INT_UART3		18
+#define MX31_INT_IIM		19
+#define MX31_INT_SIM2		20
+#define MX31_INT_SIM1		21
+#define MX31_INT_RNGA		22
+#define MX31_INT_EVTMON		23
+#define MX31_INT_KPP		24
+#define MX31_INT_RTC		25
+#define MX31_INT_PWM		26
+#define MX31_INT_EPIT2		27
+#define MX31_INT_EPIT1		28
+#define MX31_INT_GPT		29
+#define MX31_INT_POWER_FAIL	30
+#define MX31_INT_CCM_DVFS	31
+#define MX31_INT_UART2		32
+#define MX31_INT_NANDFC		33
+#define MX31_INT_SDMA		34
+#define MX31_INT_USB1		35
+#define MX31_INT_USB2		36
+#define MX31_INT_USB3		37
+#define MX31_INT_USB4		38
+#define MX31_INT_MSHC1		39
+#define MX31_INT_MSHC2		40
+#define MX31_INT_IPU_ERR	41
+#define MX31_INT_IPU_SYN	42
+#define MX31_INT_UART1		45
+#define MX31_INT_UART4		46
+#define MX31_INT_UART5		47
+#define MX31_INT_ECT		48
+#define MX31_INT_SCC_SCM	49
+#define MX31_INT_SCC_SMN	50
+#define MX31_INT_GPIO2		51
+#define MX31_INT_GPIO1		52
+#define MX31_INT_CCM		53
+#define MX31_INT_PCMCIA		54
+#define MX31_INT_WDOG		55
+#define MX31_INT_GPIO3		56
+#define MX31_INT_EXT_POWER	58
+#define MX31_INT_EXT_TEMPER	59
+#define MX31_INT_EXT_SENSOR60	60
+#define MX31_INT_EXT_SENSOR61	61
+#define MX31_INT_EXT_WDOG	62
+#define MX31_INT_EXT_TV		63
 
+#define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX31_CHIP_REV_1_0		0x10
+#define MX31_CHIP_REV_1_1		0x11
+#define MX31_CHIP_REV_1_2		0x12
+#define MX31_CHIP_REV_1_3		0x13
+#define MX31_CHIP_REV_2_0		0x20
+#define MX31_CHIP_REV_2_1		0x21
+#define MX31_CHIP_REV_2_2		0x22
+#define MX31_CHIP_REV_2_3		0x23
+#define MX31_CHIP_REV_3_0		0x30
+#define MX31_CHIP_REV_3_1		0x31
+#define MX31_CHIP_REV_3_2		0x32
+
+#define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
+#define MX31_SYSTEM_REV_NUM		3
+
+/* these should go away */
+#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
+#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
+#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
+#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
+#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
+#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
+#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
+#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
+#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
+#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
+#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
+#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
+#define MXC_INT_FIRI MX31_INT_FIRI
+#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
+#define MXC_INT_MBX MX31_INT_MBX
+#define MXC_INT_CSPI3 MX31_INT_CSPI3
+#define MXC_INT_SIM2 MX31_INT_SIM2
+#define MXC_INT_SIM1 MX31_INT_SIM1
+#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
+#define MXC_INT_USB1 MX31_INT_USB1
+#define MXC_INT_USB2 MX31_INT_USB2
+#define MXC_INT_USB3 MX31_INT_USB3
+#define MXC_INT_USB4 MX31_INT_USB4
+#define MXC_INT_MSHC2 MX31_INT_MSHC2
+#define MXC_INT_UART4 MX31_INT_UART4
+#define MXC_INT_UART5 MX31_INT_UART5
+#define MXC_INT_CCM MX31_INT_CCM
+#define MXC_INT_PCMCIA MX31_INT_PCMCIA
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index ab4cfec..af871bc 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -2,29 +2,196 @@
  * IRAM
  */
 #define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
-#define MX35_IRAM_SIZE		SZ_128K
+#define MX35_IRAM_SIZE			SZ_128K
 
-#define MXC_FEC_BASE_ADDR	0x50038000
-#define MX35_OTG_BASE_ADDR	0x53ff4000
-#define MX35_NFC_BASE_ADDR	0xBB000000
+#define MX35_L2CC_BASE_ADDR		0x30000000
+#define MX35_L2CC_SIZE			SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR		0x43f00000
+#define MX35_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX35_AIPS1_SIZE			SZ_1M
+#define MX35_MAX_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR		0x50000000
+#define MX35_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX35_SPBA0_SIZE			SZ_1M
+#define MX35_UART3_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_DMA_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR		0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR		(MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR		0x53f00000
+#define MX35_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX35_AIPS2_SIZE			SZ_1M
+#define MX35_CCM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_OTG_BASE_ADDR		0x53ff4000
+
+#define MX35_ROMP_BASE_ADDR		0x60000000
+#define MX35_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX35_ROMP_SIZE			SZ_1M
+
+#define MX35_AVIC_BASE_ADDR		0x68000000
+#define MX35_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX35_AVIC_SIZE			SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR		0x70000000
+#define MX35_CSD0_BASE_ADDR		0x80000000
+#define MX35_CSD1_BASE_ADDR		0x90000000
+
+#define MX35_CS0_BASE_ADDR		0xa0000000
+#define MX35_CS1_BASE_ADDR		0xa8000000
+#define MX35_CS2_BASE_ADDR		0xb0000000
+#define MX35_CS3_BASE_ADDR		0xb2000000
+
+#define MX35_CS4_BASE_ADDR		0xb4000000
+#define MX35_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX35_CS4_SIZE			SZ_32M
+
+#define MX35_CS5_BASE_ADDR		0xb6000000
+#define MX35_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX35_CS5_SIZE			SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR		0xb8000000
+#define MX35_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX35_X_MEMC_SIZE		SZ_64K
+#define MX35_ESDCTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR		MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR		0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*
  * Interrupt numbers
  */
-#define MXC_INT_OWIRE		2
+#define MX35_INT_OWIRE		2
+#define MX35_INT_I2C3		3
+#define MX35_INT_I2C2		4
+#define MX35_INT_RTIC		6
 #define MX35_INT_MMC_SDHC1	7
-#define MXC_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_MMC_SDHC2	8
+#define MX35_INT_MMC_SDHC3	9
+#define MX35_INT_I2C		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
-#define MXC_INT_GPU2D		16
-#define MXC_INT_ASRC		17
-#define MXC_INT_USBHS		35
-#define MXC_INT_USBOTG		37
-#define MXC_INT_ESAI		40
-#define MXC_INT_CAN1		43
-#define MXC_INT_CAN2		44
-#define MXC_INT_MLB		46
-#define MXC_INT_SPDIF		47
-#define MXC_INT_FEC		57
+#define MX35_INT_CSPI2		13
+#define MX35_INT_CSPI1		14
+#define MX35_INT_ATA		15
+#define MX35_INT_GPU2D		16
+#define MX35_INT_ASRC		17
+#define MX35_INT_UART3		18
+#define MX35_INT_IIM		19
+#define MX35_INT_RNGA		22
+#define MX35_INT_EVTMON		23
+#define MX35_INT_KPP		24
+#define MX35_INT_RTC		25
+#define MX35_INT_PWM		26
+#define MX35_INT_EPIT2		27
+#define MX35_INT_EPIT1		28
+#define MX35_INT_GPT		29
+#define MX35_INT_POWER_FAIL	30
+#define MX35_INT_UART2		32
+#define MX35_INT_NANDFC		33
+#define MX35_INT_SDMA		34
+#define MX35_INT_USBHS		35
+#define MX35_INT_USBOTG		37
+#define MX35_INT_MSHC1		39
+#define MX35_INT_ESAI		40
+#define MX35_INT_IPU_ERR	41
+#define MX35_INT_IPU_SYN	42
+#define MX35_INT_CAN1		43
+#define MX35_INT_CAN2		44
+#define MX35_INT_UART1		45
+#define MX35_INT_MLB		46
+#define MX35_INT_SPDIF		47
+#define MX35_INT_ECT		48
+#define MX35_INT_SCC_SCM	49
+#define MX35_INT_SCC_SMN	50
+#define MX35_INT_GPIO2		51
+#define MX35_INT_GPIO1		52
+#define MX35_INT_WDOG		55
+#define MX35_INT_GPIO3		56
+#define MX35_INT_FEC		57
+#define MX35_INT_EXT_POWER	58
+#define MX35_INT_EXT_TEMPER	59
+#define MX35_INT_EXT_SENSOR60	60
+#define MX35_INT_EXT_SENSOR61	61
+#define MX35_INT_EXT_WDOG	62
+#define MX35_INT_EXT_TV		63
 
+#define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX35_CHIP_REV_1_0		0x10
+#define MX35_CHIP_REV_1_1		0x11
+#define MX35_CHIP_REV_1_2		0x12
+#define MX35_CHIP_REV_1_3		0x13
+#define MX35_CHIP_REV_2_0		0x20
+#define MX35_CHIP_REV_2_1		0x21
+#define MX35_CHIP_REV_2_2		0x22
+#define MX35_CHIP_REV_2_3		0x23
+#define MX35_CHIP_REV_3_0		0x30
+#define MX35_CHIP_REV_3_1		0x31
+#define MX35_CHIP_REV_3_2		0x32
+
+#define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_NUM		3
+
+/* these should go away */
+#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
+#define MXC_INT_OWIRE MX35_INT_OWIRE
+#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
+#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
+#define MXC_INT_GPU2D MX35_INT_GPU2D
+#define MXC_INT_ASRC MX35_INT_ASRC
+#define MXC_INT_USBHS MX35_INT_USBHS
+#define MXC_INT_USBOTG MX35_INT_USBOTG
+#define MXC_INT_ESAI MX35_INT_ESAI
+#define MXC_INT_CAN1 MX35_INT_CAN1
+#define MXC_INT_CAN2 MX35_INT_CAN2
+#define MXC_INT_MLB MX35_INT_MLB
+#define MXC_INT_SPDIF MX35_INT_SPDIF
+#define MXC_INT_FEC MX35_INT_FEC
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 009f444..be69272 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -34,120 +34,117 @@
  *         	C0000000	64M	PCMCIA/CF
  */
 
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define CS5_BASE_ADDR_VIRT	0xF6000000
-#define CS5_SIZE		SZ_32M
-
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
 /*
  * L2CC
  */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_SIZE		SZ_1M
+#define MX3x_L2CC_BASE_ADDR		0x30000000
+#define MX3x_L2CC_SIZE			SZ_1M
 
 /*
  * AIPS 1
  */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
-
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+#define MX3x_AIPS1_BASE_ADDR		0x43f00000
+#define MX3x_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX3x_AIPS1_SIZE			SZ_1M
+#define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
+#define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
+#define MX3x_CLKCTL_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x0c000)
+#define MX3x_ETB_SLOT4_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x10000)
+#define MX3x_ETB_SLOT5_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x14000)
+#define MX3x_ECT_CTIO_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x18000)
+#define MX3x_I2C_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x80000)
+#define MX3x_I2C3_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x84000)
+#define MX3x_UART1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x90000)
+#define MX3x_UART2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x94000)
+#define MX3x_I2C2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x98000)
+#define MX3x_OWIRE_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x9c000)
+#define MX3x_SSI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa0000)
+#define MX3x_CSPI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa4000)
+#define MX3x_KPP_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa8000)
+#define MX3x_IOMUXC_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xac000)
+#define MX3x_ECT_IP1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xb8000)
+#define MX3x_ECT_IP2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xbc000)
 
 /*
  * SPBA global module enabled #0
  */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
-
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+#define MX3x_SPBA0_BASE_ADDR		0x50000000
+#define MX3x_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX3x_SPBA0_SIZE			SZ_1M
+#define MX3x_UART3_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x0c000)
+#define MX3x_CSPI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x10000)
+#define MX3x_SSI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x14000)
+#define MX3x_ATA_DMA_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x20000)
+#define MX3x_MSHC1_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x24000)
+#define MX3x_SPBA_CTRL_BASE_ADDR		(MX3x_SPBA0_BASE_ADDR + 0x3c000)
 
 /*
  * AIPS 2
  */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+#define MX3x_AIPS2_BASE_ADDR		0x53f00000
+#define MX3x_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX3x_AIPS2_SIZE			SZ_1M
+#define MX3x_CCM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x80000)
+#define MX3x_GPT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x90000)
+#define MX3x_EPIT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x94000)
+#define MX3x_EPIT2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x98000)
+#define MX3x_GPIO3_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xa4000)
+#define MX3x_SCC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xac000)
+#define MX3x_RNGA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xb0000)
+#define MX3x_IPU_CTRL_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc0000)
+#define MX3x_AUDMUX_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc4000)
+#define MX3x_GPIO1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xcc000)
+#define MX3x_GPIO2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd0000)
+#define MX3x_SDMA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd4000)
+#define MX3x_RTC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd8000)
+#define MX3x_WDOG_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xdc000)
+#define MX3x_PWM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xe0000)
+#define MX3x_RTIC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xec000)
 
 /*
  * ROMP and AVIC
  */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
+#define MX3x_ROMP_BASE_ADDR		0x60000000
+#define MX3x_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX3x_ROMP_SIZE			SZ_1M
 
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
-
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX3x_AVIC_BASE_ADDR		0x68000000
+#define MX3x_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX3x_AVIC_SIZE			SZ_1M
 
 /*
  * Memory regions and CS
  */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
+#define MX3x_IPU_MEM_BASE_ADDR		0x70000000
+#define MX3x_CSD0_BASE_ADDR		0x80000000
+#define MX3x_CSD1_BASE_ADDR		0x90000000
+
+#define MX3x_CS0_BASE_ADDR		0xa0000000
+#define MX3x_CS1_BASE_ADDR		0xa8000000
+#define MX3x_CS2_BASE_ADDR		0xb0000000
+#define MX3x_CS3_BASE_ADDR		0xb2000000
+
+#define MX3x_CS4_BASE_ADDR		0xb4000000
+#define MX3x_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX3x_CS4_SIZE			SZ_32M
+
+#define MX3x_CS5_BASE_ADDR		0xb6000000
+#define MX3x_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX3x_CS5_SIZE			SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX3x_X_MEMC_BASE_ADDR		0xb8000000
+#define MX3x_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX3x_X_MEMC_SIZE		SZ_64K
+#define MX3x_ESDCTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x1000)
+#define MX3x_WEIM_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x2000)
+#define MX3x_M3IF_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x3000)
+#define MX3x_EMI_CTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x4000)
+#define MX3x_PCMCIA_CTL_BASE_ADDR		MX3x_EMI_CTL_BASE_ADDR
+
+#define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*!
  * This macro defines the physical to virtual address mapping for all the
@@ -202,74 +199,207 @@
 /*
  * Interrupt numbers
  */
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
-#define MXC_INT_RTIC		6
-#define MXC_INT_I2C		10
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_POWER_FAIL	30
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
-#define MXC_INT_MSHC1		39
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_UART1		45
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
+#define MX3x_INT_I2C3		3
+#define MX3x_INT_I2C2		4
+#define MX3x_INT_RTIC		6
+#define MX3x_INT_I2C		10
+#define MX3x_INT_CSPI2		13
+#define MX3x_INT_CSPI1		14
+#define MX3x_INT_ATA		15
+#define MX3x_INT_UART3		18
+#define MX3x_INT_IIM		19
+#define MX3x_INT_RNGA		22
+#define MX3x_INT_EVTMON		23
+#define MX3x_INT_KPP		24
+#define MX3x_INT_RTC		25
+#define MX3x_INT_PWM		26
+#define MX3x_INT_EPIT2		27
+#define MX3x_INT_EPIT1		28
+#define MX3x_INT_GPT		29
+#define MX3x_INT_POWER_FAIL	30
+#define MX3x_INT_UART2		32
+#define MX3x_INT_NANDFC		33
+#define MX3x_INT_SDMA		34
+#define MX3x_INT_MSHC1		39
+#define MX3x_INT_IPU_ERR	41
+#define MX3x_INT_IPU_SYN	42
+#define MX3x_INT_UART1		45
+#define MX3x_INT_ECT		48
+#define MX3x_INT_SCC_SCM	49
+#define MX3x_INT_SCC_SMN	50
+#define MX3x_INT_GPIO2		51
+#define MX3x_INT_GPIO1		52
+#define MX3x_INT_WDOG		55
+#define MX3x_INT_GPIO3		56
+#define MX3x_INT_EXT_POWER	58
+#define MX3x_INT_EXT_TEMPER	59
+#define MX3x_INT_EXT_SENSOR60	60
+#define MX3x_INT_EXT_SENSOR61	61
+#define MX3x_INT_EXT_WDOG	62
+#define MX3x_INT_EXT_TV		63
 
-#define PROD_SIGNATURE		0x1	/* For MX31 */
+#define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
+#define MX3x_CHIP_REV_1_0		0x10
+#define MX3x_CHIP_REV_1_1		0x11
+#define MX3x_CHIP_REV_1_2		0x12
+#define MX3x_CHIP_REV_1_3		0x13
+#define MX3x_CHIP_REV_2_0		0x20
+#define MX3x_CHIP_REV_2_1		0x21
+#define MX3x_CHIP_REV_2_2		0x22
+#define MX3x_CHIP_REV_2_3		0x23
+#define MX3x_CHIP_REV_3_0		0x30
+#define MX3x_CHIP_REV_3_1		0x31
+#define MX3x_CHIP_REV_3_2		0x32
 
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
+#define MX3x_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
+#define MX3x_SYSTEM_REV_NUM		3
 
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
-extern unsigned int system_rev;
+extern unsigned int mx31_cpu_rev;
+extern void mx31_read_cpu_rev(void);
 
 static inline int mx31_revision(void)
 {
-	return system_rev;
+	return mx31_cpu_rev;
 }
 #endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+/* these should go away */
+#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
+#define L2CC_SIZE MX3x_L2CC_SIZE
+#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
+#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
+#define AIPS1_SIZE MX3x_AIPS1_SIZE
+#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
+#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
+#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
+#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
+#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
+#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
+#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
+#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
+#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
+#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
+#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
+#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
+#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
+#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
+#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
+#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
+#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
+#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
+#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
+#define SPBA0_SIZE MX3x_SPBA0_SIZE
+#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
+#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
+#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
+#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
+#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
+#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
+#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
+#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
+#define AIPS2_SIZE MX3x_AIPS2_SIZE
+#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
+#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
+#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
+#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
+#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
+#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
+#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
+#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
+#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
+#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
+#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
+#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
+#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
+#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
+#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
+#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
+#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
+#define ROMP_SIZE MX3x_ROMP_SIZE
+#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
+#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
+#define AVIC_SIZE MX3x_AVIC_SIZE
+#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
+#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
+#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
+#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
+#define CS4_SIZE MX3x_CS4_SIZE
+#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
+#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
+#define CS5_SIZE MX3x_CS5_SIZE
+#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
+#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
+#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
+#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
+#define MXC_INT_I2C3 MX3x_INT_I2C3
+#define MXC_INT_I2C2 MX3x_INT_I2C2
+#define MXC_INT_RTIC MX3x_INT_RTIC
+#define MXC_INT_I2C MX3x_INT_I2C
+#define MXC_INT_CSPI2 MX3x_INT_CSPI2
+#define MXC_INT_CSPI1 MX3x_INT_CSPI1
+#define MXC_INT_ATA MX3x_INT_ATA
+#define MXC_INT_UART3 MX3x_INT_UART3
+#define MXC_INT_IIM MX3x_INT_IIM
+#define MXC_INT_RNGA MX3x_INT_RNGA
+#define MXC_INT_EVTMON MX3x_INT_EVTMON
+#define MXC_INT_KPP MX3x_INT_KPP
+#define MXC_INT_RTC MX3x_INT_RTC
+#define MXC_INT_PWM MX3x_INT_PWM
+#define MXC_INT_EPIT2 MX3x_INT_EPIT2
+#define MXC_INT_EPIT1 MX3x_INT_EPIT1
+#define MXC_INT_GPT MX3x_INT_GPT
+#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
+#define MXC_INT_UART2 MX3x_INT_UART2
+#define MXC_INT_NANDFC MX3x_INT_NANDFC
+#define MXC_INT_SDMA MX3x_INT_SDMA
+#define MXC_INT_MSHC1 MX3x_INT_MSHC1
+#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
+#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
+#define MXC_INT_UART1 MX3x_INT_UART1
+#define MXC_INT_ECT MX3x_INT_ECT
+#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
+#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
+#define MXC_INT_GPIO2 MX3x_INT_GPIO2
+#define MXC_INT_GPIO1 MX3x_INT_GPIO1
+#define MXC_INT_WDOG MX3x_INT_WDOG
+#define MXC_INT_GPIO3 MX3x_INT_GPIO3
+#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
+#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
+#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
+#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
+#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
+#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
+#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
+#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
+#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
+#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
+#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
+#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
+#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
+#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
+#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
+#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
+#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
+#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
+#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
+#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
 
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
new file mode 100644
index 0000000..96b6ab4
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct otg_io_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 082a390..4d5d395 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -83,6 +83,8 @@
 	case MACH_TYPE_MX27ADS:
 	case MACH_TYPE_PCM038:
 	case MACH_TYPE_MX21ADS:
+	case MACH_TYPE_PCA100:
+	case MACH_TYPE_MXT_TD60:
 		uart_base = MX2X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX31LITE:
@@ -94,6 +96,7 @@
 	case MACH_TYPE_MX31ADS:
 	case MACH_TYPE_MX35_3DS:
 	case MACH_TYPE_PCM043:
+	case MACH_TYPE_LILLY1131:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 851ca99..b318c6a 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -31,19 +31,11 @@
 
 static void __iomem *base;
 
-static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
-
 /*
- * setups a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 {
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
-		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
 		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
@@ -66,37 +58,13 @@
 	for (i = 0; i < count; i++) {
 		ret = mxc_iomux_v3_setup_pad(p);
 		if (ret)
-			goto setup_error;
+			return ret;
 		p++;
 	}
 	return 0;
-
-setup_error:
-	mxc_iomux_v3_release_multiple_pads(pad_list, i);
-	return ret;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
 
-void mxc_iomux_v3_release_pad(struct pad_desc *pad)
-{
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
-
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
-{
-	struct pad_desc *p = pad_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_v3_release_pad(p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
-
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
 {
 	base = iomux_v3_base;
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
new file mode 100644
index 0000000..582c6df
--- /dev/null
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07	/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xff	/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xff	/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xff	/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+	int timeout = 10000;
+
+	while (timeout--) {
+		u32 data = __raw_readl(view);
+
+		if (!(data & bit))
+			return 0;
+
+		cpu_relax();
+	};
+
+	printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+	return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	/* read the register */
+	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+	/* wait for completion */
+	ret = ulpi_poll(view, ULPIVW_RUN);
+	if (ret)
+		return ret;
+
+	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure the interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+		      (reg << ULPIVW_ADDR_SHIFT) |
+		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+	/* wait for completion */
+	return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct otg_io_access_ops mxc_ulpi_access_ops = {
+	.read	= ulpi_read,
+	.write	= ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 0000000..159daf5
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+
+config PLAT_NOMADIK
+	bool
+	depends on ARCH_NOMADIK || ARCH_U8500
+	default y
+	help
+	  Common platform code for Nomadik and other ST-Ericsson
+	  platforms.
+
+if PLAT_NOMADIK
+
+config HAS_MTU
+	bool
+	help
+	  Support for Multi Timer Unit. MTU provides access
+	  to multiple interrupt generating programmable
+	  32-bit free running decrementing counters.
+
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 0000000..37c7cdd
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+
+obj-$(CONFIG_HAS_MTU)	+= timer.o
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
new file mode 100644
index 0000000..42c9072
--- /dev/null
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -0,0 +1,48 @@
+#ifndef __PLAT_MTU_H
+#define __PLAT_MTU_H
+
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
+#define MTU_RIS		0x04	/* Raw interrupt status */
+#define MTU_MIS		0x08	/* Masked interrupt status */
+#define MTU_ICR		0x0C	/* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
+#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
+#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
+#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA		0x80
+#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK	0x0c
+#define MTU_CRn_PRESCALE_1		0x00
+#define MTU_CRn_PRESCALE_16		0x04
+#define MTU_CRn_PRESCALE_256		0x08
+#define MTU_CRn_32BITS		0x02
+#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR	0xff0
+#define MTU_ITOP	0xff4
+
+#define MTU_PERIPH_ID0	0xfe0
+#define MTU_PERIPH_ID1	0xfe4
+#define MTU_PERIPH_ID2	0xfe8
+#define MTU_PERIPH_ID3	0xfeC
+
+#define MTU_PCELL0	0xff0
+#define MTU_PCELL1	0xff4
+#define MTU_PCELL2	0xff8
+#define MTU_PCELL3	0xffC
+
+#endif /* __PLAT_MTU_H */
+
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
new file mode 100644
index 0000000..62f18ad
--- /dev/null
+++ b/arch/arm/plat-nomadik/timer.c
@@ -0,0 +1,147 @@
+/*
+ *  linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+
+#include <plat/mtu.h>
+
+static u32	nmdk_count;		/* accumulated count */
+static u32	nmdk_cycle;		/* write-once */
+
+/* setup by the platform code */
+void __iomem *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	u32 count = readl(mtu_base + MTU_VAL(0));
+	return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+	.name		= "mtu_0",
+	.rating		= 120,
+	.read		= nmdk_read_timer,
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+			     struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* enable interrupts -- and count current value? */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		BUG(); /* Not supported, yet */
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* disable irq */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device nmdk_clkevt = {
+	.name		= "mtu_0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 100,
+	.set_mode	= nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+	/* ack: "interrupt clear register" */
+	writel(1 << 0, mtu_base + MTU_ICR);
+
+	/* we can't count lost ticks, unfortunately */
+	nmdk_count += nmdk_cycle;
+	nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+	.name		= "Nomadik Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+	u32 cr;
+
+	writel(0, mtu_base + MTU_CR(0)); /* off */
+
+	/* configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+	writel(cr, mtu_base + MTU_CR(0));
+	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+void __init nmdk_timer_init(void)
+{
+	unsigned long rate;
+	int bits;
+
+	rate = CLOCK_TICK_RATE; /* 2.4MHz */
+	nmdk_cycle = (rate + HZ/2) / HZ;
+
+	/* Init the timer and register clocksource */
+	nmdk_timer_reset();
+
+	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+	bits =  8*sizeof(nmdk_count);
+	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+	if (clocksource_register(&nmdk_clksrc))
+		printk(KERN_ERR "timer: failed to initialize clock "
+			"source %s\n", nmdk_clksrc.name);
+
+	/* Register irq and clockevents */
+	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&nmdk_clkevt);
+}
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 64b3f52..f348ddf 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -165,7 +165,7 @@
 choice
 	prompt "Low-level debug console UART"
 	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_UART1
+	default OMAP_LL_DEBUG_NONE
 
 config OMAP_LL_DEBUG_UART1
 	bool "UART1"
@@ -176,6 +176,9 @@
 config OMAP_LL_DEBUG_UART3
 	bool "UART3"
 
+config OMAP_LL_DEBUG_NONE
+	bool "None"
+
 endchoice
 
 config OMAP_SERIAL_WAKE
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index bf880e9..681bfc3 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -24,7 +24,7 @@
 #include <linux/debugfs.h>
 #include <linux/io.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3a4768d..cc050b3 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
@@ -49,6 +49,9 @@
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
+/* used by omap-smp.c and board-4430sdp.c */
+void __iomem *gic_cpu_base_addr;
+
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
@@ -224,12 +227,12 @@
 
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -242,12 +245,12 @@
 
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -260,12 +263,12 @@
 
 static struct omap_globals omap343x_globals = {
 	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_343x(void)
@@ -277,10 +280,10 @@
 #if defined(CONFIG_ARCH_OMAP4)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830a000),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 341235c..f8ddbdd 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f668483..09c1107 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -16,7 +16,7 @@
 
 #include <mach/hardware.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 #include <mach/gpio.h>
 
 
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9395898..6c768b7 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index a64b692..f866178 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -19,15 +19,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/control.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/control.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/menelaus.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/menelaus.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -113,17 +113,17 @@
 		omap_cfg_reg(E19_1610_KBR4);
 		omap_cfg_reg(N19_1610_KBR5);
 	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_730_KBR0);
-		omap_cfg_reg(J7_730_KBR1);
-		omap_cfg_reg(E1_730_KBR2);
-		omap_cfg_reg(F3_730_KBR3);
-		omap_cfg_reg(D2_730_KBR4);
+		omap_cfg_reg(E2_7XX_KBR0);
+		omap_cfg_reg(J7_7XX_KBR1);
+		omap_cfg_reg(E1_7XX_KBR2);
+		omap_cfg_reg(F3_7XX_KBR3);
+		omap_cfg_reg(D2_7XX_KBR4);
 
-		omap_cfg_reg(C2_730_KBC0);
-		omap_cfg_reg(D3_730_KBC1);
-		omap_cfg_reg(E4_730_KBC2);
-		omap_cfg_reg(F4_730_KBC3);
-		omap_cfg_reg(E3_730_KBC4);
+		omap_cfg_reg(C2_7XX_KBC0);
+		omap_cfg_reg(D3_7XX_KBC1);
+		omap_cfg_reg(E4_7XX_KBC2);
+		omap_cfg_reg(F4_7XX_KBC3);
+		omap_cfg_reg(E3_7XX_KBC4);
 	} else if (machine_is_omap_h4()) {
 		omap_cfg_reg(T19_24XX_KBR0);
 		omap_cfg_reg(R19_24XX_KBR1);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 68eaae3..be4ce07 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -32,9 +32,9 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 
 #undef DEBUG
 
@@ -54,6 +54,12 @@
 
 static int enable_1510_mode;
 
+static struct omap_dma_global_context_registers {
+	u32 dma_irqenable_l0;
+	u32 dma_ocp_sysconfig;
+	u32 dma_gcr;
+} omap_dma_global_context;
+
 struct omap_dma_lch {
 	int next_lch;
 	int dev_id;
@@ -2355,44 +2361,83 @@
 }
 EXPORT_SYMBOL(omap_stop_lcd_dma);
 
+void omap_dma_global_context_save(void)
+{
+	omap_dma_global_context.dma_irqenable_l0 =
+		dma_read(IRQENABLE_L0);
+	omap_dma_global_context.dma_ocp_sysconfig =
+		dma_read(OCP_SYSCONFIG);
+	omap_dma_global_context.dma_gcr = dma_read(GCR);
+}
+
+void omap_dma_global_context_restore(void)
+{
+	int ch;
+
+	dma_write(omap_dma_global_context.dma_gcr, GCR);
+	dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+		OCP_SYSCONFIG);
+	dma_write(omap_dma_global_context.dma_irqenable_l0,
+		IRQENABLE_L0);
+
+	/*
+	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+	 * after secure sram context save and restore. Hence we need to
+	 * manually clear those IRQs to avoid spurious interrupts. This
+	 * affects only secure devices.
+	 */
+	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		dma_write(0x3 , IRQSTATUS_L0);
+
+	for (ch = 0; ch < dma_chan_count; ch++)
+		if (dma_chan[ch].dev_id != -1)
+			omap_clear_dma(ch);
+}
+
 /*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)
 {
+	unsigned long base;
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
+		base = OMAP1_DMA_BASE;
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		base = OMAP24XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		base = OMAP34XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		base = OMAP44XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
 	}
 
+	omap_dma_base = ioremap(base, SZ_4K);
+	BUG_ON(!omap_dma_base);
+
 	if (cpu_class_is_omap2() && omap_dma_reserve_channels
 			&& (omap_dma_reserve_channels <= dma_lch_count))
 		dma_lch_count = omap_dma_reserve_channels;
 
 	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
 				GFP_KERNEL);
-	if (!dma_chan)
-		return -ENOMEM;
+	if (!dma_chan) {
+		r = -ENOMEM;
+		goto out_unmap;
+	}
 
 	if (cpu_class_is_omap2()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
 		if (!dma_linked_lch) {
-			kfree(dma_chan);
-			return -ENOMEM;
+			r = -ENOMEM;
+			goto out_free;
 		}
 	}
 
@@ -2466,7 +2511,7 @@
 				for (i = 0; i < ch; i++)
 					free_irq(omap1_dma_irq[i],
 						 (void *) (i + 1));
-				return r;
+				goto out_free;
 			}
 		}
 	}
@@ -2484,8 +2529,8 @@
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
-	/* Enable smartidle idlemodes and autoidle */
 	if (cpu_is_omap34xx()) {
+		/* Enable smartidle idlemodes and autoidle */
 		u32 v = dma_read(OCP_SYSCONFIG);
 		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
 				DMA_SYSCONFIG_SIDLEMODE_MASK |
@@ -2494,6 +2539,13 @@
 			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
 			DMA_SYSCONFIG_AUTOIDLE);
 		dma_write(v , OCP_SYSCONFIG);
+		/* reserve dma channels 0 and 1 in high security devices */
+		if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+			printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+					"HS ROM code\n");
+			dma_chan[0].dev_id = 0;
+			dma_chan[1].dev_id = 1;
+		}
 	}
 
 
@@ -2508,11 +2560,19 @@
 			       "(error %d)\n", r);
 			for (i = 0; i < dma_chan_count; i++)
 				free_irq(omap1_dma_irq[i], (void *) (i + 1));
-			return r;
+			goto out_free;
 		}
 	}
 
 	return 0;
+
+out_free:
+	kfree(dma_chan);
+
+out_unmap:
+	iounmap(omap_dma_base);
+
+	return r;
 }
 
 arch_initcall(omap_init_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index d325b54..64f407e 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,7 +38,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <mach/irqs.h>
 
 /* register offsets */
@@ -742,16 +742,17 @@
 int __init omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
-	int i;
+	int i, map_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 
 	if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
 		return -ENODEV;
 
 	spin_lock_init(&dm_timer_lock);
 
-	if (cpu_class_is_omap1())
+	if (cpu_class_is_omap1()) {
 		dm_timers = omap1_dm_timers;
-	else if (cpu_is_omap24xx()) {
+		map_size = SZ_2K;
+	} else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
 		dm_source_names = omap2_dm_source_names;
 		dm_source_clocks = omap2_dm_source_clocks;
@@ -774,10 +775,11 @@
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		if (cpu_class_is_omap1())
-			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
-		else
-			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
+
+		/* Static mapping, never released */
+		timer->io_base = ioremap(timer->phys_base, map_size);
+		BUG_ON(!timer->io_base);
+
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 3746222..78a4ce5 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -32,9 +32,9 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/sram.h>
-#include <mach/omapfb.h>
+#include <plat/board.h>
+#include <plat/sram.h>
+#include <plat/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7c345b7..055160e0 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -68,52 +68,36 @@
 #define OMAP1610_GPIO_SET_DATAOUT	0x00f0
 
 /*
- * OMAP730 specific GPIO registers
+ * OMAP7XX specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP730_GPIO_DATA_INPUT		0x00
-#define OMAP730_GPIO_DATA_OUTPUT	0x04
-#define OMAP730_GPIO_DIR_CONTROL	0x08
-#define OMAP730_GPIO_INT_CONTROL	0x0c
-#define OMAP730_GPIO_INT_MASK		0x10
-#define OMAP730_GPIO_INT_STATUS		0x14
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP7XX_GPIO_DATA_INPUT		0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
+#define OMAP7XX_GPIO_DIR_CONTROL	0x08
+#define OMAP7XX_GPIO_INT_CONTROL	0x0c
+#define OMAP7XX_GPIO_INT_MASK		0x10
+#define OMAP7XX_GPIO_INT_STATUS		0x14
 
-/*
- * OMAP850 specific GPIO registers
- */
-#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP850_GPIO_DATA_INPUT		0x00
-#define OMAP850_GPIO_DATA_OUTPUT	0x04
-#define OMAP850_GPIO_DIR_CONTROL	0x08
-#define OMAP850_GPIO_INT_CONTROL	0x0c
-#define OMAP850_GPIO_INT_MASK		0x10
-#define OMAP850_GPIO_INT_STATUS		0x14
-
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		0x48018000
+#define OMAP242X_GPIO2_BASE		0x4801a000
+#define OMAP242X_GPIO3_BASE		0x4801c000
+#define OMAP242X_GPIO4_BASE		0x4801e000
 
-#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		0x4900C000
+#define OMAP243X_GPIO2_BASE		0x4900E000
+#define OMAP243X_GPIO3_BASE		0x49010000
+#define OMAP243X_GPIO4_BASE		0x49012000
+#define OMAP243X_GPIO5_BASE		0x480B6000
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -170,24 +154,25 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		0x48310000
+#define OMAP34XX_GPIO2_BASE		0x49050000
+#define OMAP34XX_GPIO3_BASE		0x49052000
+#define OMAP34XX_GPIO4_BASE		0x49054000
+#define OMAP34XX_GPIO5_BASE		0x49056000
+#define OMAP34XX_GPIO6_BASE		0x49058000
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
+#define OMAP44XX_GPIO1_BASE             0x4a310000
+#define OMAP44XX_GPIO2_BASE             0x48055000
+#define OMAP44XX_GPIO3_BASE             0x48057000
+#define OMAP44XX_GPIO4_BASE             0x48059000
+#define OMAP44XX_GPIO5_BASE             0x4805B000
+#define OMAP44XX_GPIO6_BASE             0x4805D000
 
 struct gpio_bank {
+	unsigned long pbase;
 	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
@@ -210,101 +195,134 @@
 	spinlock_t lock;
 	struct gpio_chip chip;
 	struct clk *dbck;
+	u32 mod_usage;
 };
 
 #define METHOD_MPUIO		0
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
-#define METHOD_GPIO_730		3
-#define METHOD_GPIO_850		4
+#define METHOD_GPIO_7XX		3
 #define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
-	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
+		METHOD_GPIO_1610 },
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
-	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1510 }
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO4_BASE,  INT_730_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO5_BASE,  INT_730_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_730 },
-	{ OMAP730_GPIO6_BASE,  INT_730_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_730 },
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct gpio_bank gpio_bank_7xx[7] = {
+	{ OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160,
+		METHOD_GPIO_7XX },
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP850
-static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
-	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
-};
-#endif
-
-
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
-	{ OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
 };
 
 static struct gpio_bank gpio_bank_243x[5] = {
-	{ OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
 };
 
 #endif
 
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct gpio_bank gpio_bank_34xx[6] = {
-	{ OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+		METHOD_GPIO_24XX },
 };
 
+struct omap3_gpio_regs {
+	u32 sysconfig;
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+	u32 setwkuena;
+	u32 setdataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
 static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+	{ OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+	{ OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+	{ OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+	{ OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+	{ OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+	{ OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
 		METHOD_GPIO_24XX },
 };
 
@@ -402,14 +420,9 @@
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -469,19 +482,9 @@
 		l = 1 << gpio;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		l = __raw_readl(reg);
 		if (enable)
 			l |= 1 << gpio;
@@ -537,14 +540,9 @@
 		reg += OMAP1610_GPIO_DATAIN;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_INPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -588,14 +586,9 @@
 		reg += OMAP1610_GPIO_DATAOUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -636,6 +629,10 @@
 #else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 #endif
+	if (!(bank->mod_usage & l)) {
+		printk(KERN_ERR "GPIO %d not requested\n", gpio);
+		return;
+	}
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -671,6 +668,11 @@
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 
+	if (!bank->mod_usage) {
+		printk(KERN_ERR "GPIO not requested\n");
+		return;
+	}
+
 	enc_time &= 0xff;
 #ifdef CONFIG_ARCH_OMAP4
 	reg += OMAP4_GPIO_DEBOUNCINGTIME;
@@ -797,21 +799,9 @@
 			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
@@ -897,14 +887,9 @@
 		reg += OMAP1610_GPIO_IRQSTATUS1;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -971,16 +956,9 @@
 		mask = 0xffff;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		mask = 0xffffffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		mask = 0xffffffff;
 		inv = 1;
 		break;
@@ -1044,19 +1022,9 @@
 		l = gpio_mask;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		l = __raw_readl(reg);
 		if (enable)
 			l &= ~(gpio_mask);
@@ -1186,6 +1154,16 @@
 		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			/* Module is enabled, clocks are not gated */
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+		bank->mod_usage |= 1 << offset;
+	}
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1212,6 +1190,16 @@
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		bank->mod_usage &= ~(1 << offset);
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			/* Module is disabled, clocks are gated */
+			ctrl |= 1;
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+	}
 	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
@@ -1249,13 +1237,9 @@
 	if (bank->method == METHOD_GPIO_1610)
 		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (bank->method == METHOD_GPIO_730)
-		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (bank->method == METHOD_GPIO_850)
-		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (bank->method == METHOD_GPIO_7XX)
+		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
@@ -1524,11 +1508,8 @@
 	case METHOD_GPIO_1610:
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -1607,6 +1588,23 @@
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
+static void __init omap_gpio_show_rev(void)
+{
+	u32 rev;
+
+	if (cpu_is_omap16xx())
+		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+	else if (cpu_is_omap44xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+	else
+		return;
+
+	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+}
+
 /* This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
@@ -1617,6 +1615,7 @@
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
+	int bank_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 	char clk_name[11];
 
 	initialized = 1;
@@ -1679,77 +1678,45 @@
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
 		gpio_bank_count = 2;
 		gpio_bank = gpio_bank_1510;
+		bank_size = SZ_2K;
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		u32 rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
-		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
-		printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
-		       (rev >> 4) & 0x0f, rev & 0x0f);
+		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		printk(KERN_INFO "OMAP730 GPIO hardware\n");
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
 		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_730;
+		gpio_bank = gpio_bank_7xx;
+		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		printk(KERN_INFO "OMAP850 GPIO hardware\n");
-		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_850;
-	}
-#endif
-
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
-		int rev;
-
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 	if (cpu_is_omap243x()) {
-		int rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_243x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP34XX
 	if (cpu_is_omap34xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP4
 	if (cpu_is_omap44xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
-		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 	for (i = 0; i < gpio_bank_count; i++) {
@@ -1757,6 +1724,14 @@
 
 		bank = &gpio_bank[i];
 		spin_lock_init(&bank->lock);
+
+		/* Static mapping, never released */
+		bank->base = ioremap(bank->pbase, bank_size);
+		if (!bank->base) {
+			printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
+			continue;
+		}
+
 		if (bank_is_mpuio(bank))
 			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
 		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
@@ -1768,11 +1743,11 @@
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
-			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
 
-			gpio_count = 32; /* 730 has 32-bit GPIOs */
+			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -1804,6 +1779,8 @@
 			gpio_count = 32;
 		}
 #endif
+
+		bank->mod_usage = 0;
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1862,6 +1839,8 @@
 	if (cpu_is_omap34xx())
 		omap_writel(1 << 0, 0x48306814);
 
+	omap_gpio_show_rev();
+
 	return 0;
 }
 
@@ -2106,6 +2085,81 @@
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+	int i;
+
+	/* saving banks from 2-6 only since GPIO1 is in WKUP */
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		gpio_context[i].sysconfig =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		gpio_context[i].irqenable1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		gpio_context[i].irqenable2 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		gpio_context[i].wake_en =
+			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+		gpio_context[i].ctrl =
+			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+		gpio_context[i].oe =
+			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
+		gpio_context[i].leveldetect0 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		gpio_context[i].leveldetect1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		gpio_context[i].risingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		gpio_context[i].fallingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		gpio_context[i].dataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+		gpio_context[i].setwkuena =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
+		gpio_context[i].setdataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+	int i;
+
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		__raw_writel(gpio_context[i].sysconfig,
+				bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		__raw_writel(gpio_context[i].irqenable1,
+				bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		__raw_writel(gpio_context[i].irqenable2,
+				bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		__raw_writel(gpio_context[i].wake_en,
+				bank->base + OMAP24XX_GPIO_WAKE_EN);
+		__raw_writel(gpio_context[i].ctrl,
+				bank->base + OMAP24XX_GPIO_CTRL);
+		__raw_writel(gpio_context[i].oe,
+				bank->base + OMAP24XX_GPIO_OE);
+		__raw_writel(gpio_context[i].leveldetect0,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		__raw_writel(gpio_context[i].leveldetect1,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		__raw_writel(gpio_context[i].risingdetect,
+				bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		__raw_writel(gpio_context[i].fallingdetect,
+				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		__raw_writel(gpio_context[i].dataout,
+				bank->base + OMAP24XX_GPIO_DATAOUT);
+		__raw_writel(gpio_context[i].setwkuena,
+				bank->base + OMAP24XX_GPIO_SETWKUENA);
+		__raw_writel(gpio_context[i].setdataout,
+				bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+#endif
+
 /*
  * This may get called early from board specific init
  * for boards that have interrupts routed via FPGA.
@@ -2160,8 +2214,7 @@
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
-				cpu_is_omap850())
+		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 8b84839..c08362d 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
deleted file mode 100644
index 8e913c3..0000000
--- a/arch/arm/plat-omap/include/mach/board.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/board.h
- *
- *  Information structures for board-specific data
- *
- *  Copyright (C) 2004	Nokia Corporation
- *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <mach/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK		0x4f01
-#define OMAP_TAG_LCD		0x4f05
-#define OMAP_TAG_GPIO_SWITCH	0x4f06
-#define OMAP_TAG_FBMEM		0x4f08
-#define OMAP_TAG_STI_CONSOLE	0x4f09
-#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
-
-#define OMAP_TAG_BOOT_REASON    0x4f80
-#define OMAP_TAG_FLASH_PART	0x4f81
-#define OMAP_TAG_VERSION_STR	0x4f82
-
-struct omap_clock_config {
-	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
-	u8 system_clock_type;
-};
-
-struct omap_serial_console_config {
-	u8 console_uart;
-	u32 console_speed;
-};
-
-struct omap_sti_console_config {
-	unsigned enable:1;
-	u8 channel;
-};
-
-struct omap_camera_sensor_config {
-	u16 reset_gpio;
-	int (*power_on)(void * data);
-	int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
-	/* Configure drivers according to the connectors on your board:
-	 *  - "A" connector (rectagular)
-	 *	... for host/OHCI use, set "register_host".
-	 *  - "B" connector (squarish) or "Mini-B"
-	 *	... for device/gadget use, set "register_dev".
-	 *  - "Mini-AB" connector (very similar to Mini-B)
-	 *	... for OTG use as device OR host, initialize "otg"
-	 */
-	unsigned	register_host:1;
-	unsigned	register_dev:1;
-	u8		otg;	/* port number, 1-based:  usb1 == 2 */
-
-	u8		hmc_mode;
-
-	/* implicitly true if otg:  host supports remote wakeup? */
-	u8		rwc;
-
-	/* signaling pins used to talk to transceiver on usbN:
-	 *  0 == usbN unused
-	 *  2 == usb0-only, using internal transceiver
-	 *  3 == 3 wire bidirectional
-	 *  4 == 4 wire bidirectional
-	 *  6 == 6 wire unidirectional (or TLL)
-	 */
-	u8		pins[3];
-};
-
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
-	int default_intensity;
-	int (*set_power)(struct device *dev, int state);
-	int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
-	u32 start;
-	u32 size;
-};
-
-struct omap_pwm_led_platform_data {
-	const char *name;
-	int intensity_timer;
-	int blink_timer;
-	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
-	/* Bit field of UARTs present; bit 0 --> UART1 */
-	unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
-	char part_table[0];
-};
-
-struct omap_boot_reason_config {
-	char reason_str[12];
-};
-
-struct omap_version_config {
-	char component[12];
-	char version[12];
-};
-
-struct omap_board_config_entry {
-	u16 tag;
-	u16 len;
-	u8  data[0];
-};
-
-struct omap_board_config_kernel {
-	u16 tag;
-	const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
-	((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
-	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/mach/clockdomain.h
deleted file mode 100644
index 99ebd88..0000000
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
- * OMAP2/3 clockdomain framework functions
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
-#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
-
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/cpu.h>
-
-/* Clockdomain capability flags */
-#define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
-#define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
-#define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
-#define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
-
-#define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
-#define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
-#define CLKDM_CAN_HWSUP_SWSUP	(CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
-
-/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
-#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
-#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
-
-/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
-#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
-#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
-#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
-#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
-
-/*
- * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps
- * and sleepdeps added when a powerdomain should stay active in hwsup mode;
- * and conversely, removed when the powerdomain should be allowed to go
- * inactive in hwsup mode.
- */
-struct clkdm_pwrdm_autodep {
-
-	union {
-		/* Name of the powerdomain to add a wkdep/sleepdep on */
-		const char *name;
-
-		/* Powerdomain pointer (looked up at clkdm_init() time) */
-		struct powerdomain *ptr;
-	} pwrdm;
-
-	/* OMAP chip types that this clockdomain dep is valid on */
-	const struct omap_chip_id omap_chip;
-
-};
-
-struct clockdomain {
-
-	/* Clockdomain name */
-	const char *name;
-
-	union {
-		/* Powerdomain enclosing this clockdomain */
-		const char *name;
-
-		/* Powerdomain pointer assigned at clkdm_register() */
-		struct powerdomain *ptr;
-	} pwrdm;
-
-	/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
-	const u16 clktrctrl_mask;
-
-	/* Clockdomain capability flags */
-	const u8 flags;
-
-	/* OMAP chip types that this clockdomain is valid on */
-	const struct omap_chip_id omap_chip;
-
-	/* Usecount tracking */
-	atomic_t usecount;
-
-	struct list_head node;
-
-};
-
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps);
-int clkdm_register(struct clockdomain *clkdm);
-int clkdm_unregister(struct clockdomain *clkdm);
-struct clockdomain *clkdm_lookup(const char *name);
-
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
-			void *user);
-struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
-
-void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
-void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
-
-int omap2_clkdm_wakeup(struct clockdomain *clkdm);
-int omap2_clkdm_sleep(struct clockdomain *clkdm);
-
-int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
-int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
deleted file mode 100644
index fdeab42..0000000
--- a/arch/arm/plat-omap/include/mach/common.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/common.h
- *
- * Header for code common to all OMAP machines.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
-#define __ARCH_ARM_MACH_OMAP_COMMON_H
-
-#include <linux/i2c.h>
-
-struct sys_timer;
-
-extern void omap_map_common_io(void);
-extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
-
-/* IO bases for various OMAP processors */
-struct omap_globals {
-	u32		class;		/* OMAP class to detect */
-	void __iomem	*tap;		/* Control module ID code */
-	void __iomem	*sdrc;		/* SDRAM Controller */
-	void __iomem	*sms;		/* SDRAM Memory Scheduler */
-	void __iomem	*ctrl;		/* System Control Module */
-	void __iomem	*prm;		/* Power and Reset Management */
-	void __iomem	*cm;		/* Clock Management */
-};
-
-void omap2_set_globals_242x(void);
-void omap2_set_globals_243x(void);
-void omap2_set_globals_343x(void);
-void omap2_set_globals_443x(void);
-
-/* These get called from omap2_set_globals_xxxx(), do not call these */
-void omap2_set_globals_tap(struct omap_globals *);
-void omap2_set_globals_sdrc(struct omap_globals *);
-void omap2_set_globals_control(struct omap_globals *);
-void omap2_set_globals_prcm(struct omap_globals *);
-
-#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
deleted file mode 100644
index 826d317..0000000
--- a/arch/arm/plat-omap/include/mach/control.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/control.h
- *
- * OMAP2/3/4 System Control Module definitions
- *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
-#include <mach/io.h>
-
-#ifndef __ASSEMBLY__
-#define OMAP242X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#else
-#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
-#endif /* __ASSEMBLY__ */
-
-/*
- * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
- * OMAP24XX and OMAP34XX.
- */
-
-/* Control submodule offsets */
-
-#define OMAP2_CONTROL_INTERFACE		0x000
-#define OMAP2_CONTROL_PADCONFS		0x030
-#define OMAP2_CONTROL_GENERAL		0x270
-#define OMAP343X_CONTROL_MEM_WKUP	0x600
-#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
-#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
-
-/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
-
-#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
-
-/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
-#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
-#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
-#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
-#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
-#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
-#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
-#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
-#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
-#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
-#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
-#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
-#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
-
-/* 242x-only CONTROL_GENERAL register offsets */
-#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
-#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
-
-/* 243x-only CONTROL_GENERAL register offsets */
-/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
-#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
-#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
-#define OMAP243X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x0230)
-
-/* 24xx-only CONTROL_GENERAL register offsets */
-#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
-#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
-#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
-#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
-#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
-#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
-#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
-#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
-#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
-#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
-#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
-#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
-
-/* 34xx-only CONTROL_GENERAL register offsets */
-#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
-#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
-#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
-#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
-#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
-#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
-#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
-#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
-#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
-#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
-#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
-#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
-#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
-#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
-#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
-#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
-#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
-#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
-#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
-#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
-#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
-#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
-#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
-#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
-#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
-#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
-#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
-#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
-#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
-#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
-#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
-
-/* 34xx D2D idle-related pins, handled by PM core */
-#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
-#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
-
-/*
- * REVISIT: This list of registers is not comprehensive - there are more
- * that should be added.
- */
-
-/*
- * Control module register bit defines - these should eventually go into
- * their own regbits file.  Some of these will be complicated, depending
- * on the device type (general-purpose, emulator, test, secure, bad, other)
- * and the security mode (secure, non-secure, don't care)
- */
-/* CONTROL_DEVCONF0 bits */
-#define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
-#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
-#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
-#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
-
-/* CONTROL_DEVCONF1 bits */
-#define OMAP243X_MMC1_ACTIVE_OVERWRITE	(1 << 31)
-#define OMAP2_MMCSDIO2ADPCLKISEL	(1 << 6) /* MMC2 loop back clock */
-#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
-#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
-#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
-
-/* CONTROL_STATUS bits */
-#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
-#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
-#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
-#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
-#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
-#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
-#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
-
-/* CONTROL_PBIAS_LITE bits */
-#define OMAP343X_PBIASLITESUPPLY_HIGH1	(1 << 15)
-#define OMAP343X_PBIASLITEVMODEERROR1	(1 << 11)
-#define OMAP343X_PBIASSPEEDCTRL1	(1 << 10)
-#define OMAP343X_PBIASLITEPWRDNZ1	(1 << 9)
-#define OMAP343X_PBIASLITEVMODE1	(1 << 8)
-#define OMAP343X_PBIASLITESUPPLY_HIGH0	(1 << 7)
-#define OMAP343X_PBIASLITEVMODEERROR0	(1 << 3)
-#define OMAP2_PBIASSPEEDCTRL0		(1 << 2)
-#define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
-#define OMAP2_PBIASLITEVMODE0		(1 << 0)
-
-/* CONTROL_IVA2_BOOTMOD bits */
-#define OMAP3_IVA2_BOOTMOD_SHIFT	0
-#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
-#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
-
-/* CONTROL_PADCONF_X bits */
-#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
-#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-		defined(CONFIG_ARCH_OMAP4)
-extern void __iomem *omap_ctrl_base_get(void);
-extern u8 omap_ctrl_readb(u16 offset);
-extern u16 omap_ctrl_readw(u16 offset);
-extern u32 omap_ctrl_readl(u16 offset);
-extern void omap_ctrl_writeb(u8 val, u16 offset);
-extern void omap_ctrl_writew(u16 val, u16 offset);
-extern void omap_ctrl_writel(u32 val, u16 offset);
-#else
-#define omap_ctrl_base_get()		0
-#define omap_ctrl_readb(x)		0
-#define omap_ctrl_readw(x)		0
-#define omap_ctrl_readl(x)		0
-#define omap_ctrl_writeb(x, y)		WARN_ON(1)
-#define omap_ctrl_writew(x, y)		WARN_ON(1)
-#define omap_ctrl_writel(x, y)		WARN_ON(1)
-#endif
-#endif	/* __ASSEMBLY__ */
-
-#endif /* __ASM_ARCH_CONTROL_H */
-
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
deleted file mode 100644
index f129efb..0000000
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/cpu.h
- *
- * OMAP cpu type detection
- *
- * Copyright (C) 2004, 2008 Nokia Corporation
- *
- * Copyright (C) 2009 Texas Instruments.
- *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
- *
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_CPU_H
-#define __ASM_ARCH_OMAP_CPU_H
-
-/*
- * Omap device type i.e. EMU/HS/TST/GP/BAD
- */
-#define OMAP2_DEVICE_TYPE_TEST		0
-#define OMAP2_DEVICE_TYPE_EMU		1
-#define OMAP2_DEVICE_TYPE_SEC		2
-#define OMAP2_DEVICE_TYPE_GP		3
-#define OMAP2_DEVICE_TYPE_BAD		4
-
-int omap_type(void);
-
-struct omap_chip_id {
-	u8 oc;
-	u8 type;
-};
-
-#define OMAP_CHIP_INIT(x)	{ .oc = x }
-
-/*
- * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
- */
-unsigned int omap_rev(void);
-
-/*
- * Test if multicore OMAP support is needed
- */
-#undef MULTI_OMAP1
-#undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_OMAP730
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap730
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap850
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap1510
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP1
-#  define MULTI_OMAP1
-# else
-#  define OMAP_NAME omap16xx
-# endif
-#endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
-# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3430
-# endif
-#endif
-
-/*
- * Macros to group OMAP into cpu classes.
- * These can be used in most places.
- * cpu_is_omap7xx():	True for OMAP730, OMAP850
- * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
- * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- */
-#define GET_OMAP_CLASS	(omap_rev() & 0xff)
-
-#define IS_OMAP_CLASS(class, id)			\
-static inline int is_omap ##class (void)		\
-{							\
-	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
-}
-
-#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
-
-#define IS_OMAP_SUBCLASS(subclass, id)			\
-static inline int is_omap ##subclass (void)		\
-{							\
-	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
-}
-
-IS_OMAP_CLASS(7xx, 0x07)
-IS_OMAP_CLASS(15xx, 0x15)
-IS_OMAP_CLASS(16xx, 0x16)
-IS_OMAP_CLASS(24xx, 0x24)
-IS_OMAP_CLASS(34xx, 0x34)
-
-IS_OMAP_SUBCLASS(242x, 0x242)
-IS_OMAP_SUBCLASS(243x, 0x243)
-IS_OMAP_SUBCLASS(343x, 0x343)
-
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-#define cpu_is_omap44xx()		0
-#define cpu_is_omap443x()		0
-
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		is_omap7xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		is_omap15xx()
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		is_omap16xx()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-#  undef  cpu_is_omap7xx
-#  define cpu_is_omap7xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP15XX)
-#  undef  cpu_is_omap15xx
-#  define cpu_is_omap15xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP16XX)
-#  undef  cpu_is_omap16xx
-#  define cpu_is_omap16xx()		1
-# endif
-#endif
-
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  undef  cpu_is_omap242x
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap24xx()		is_omap24xx()
-#  define cpu_is_omap242x()		is_omap242x()
-#  define cpu_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP24XX)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP34XX)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
-# endif
-#endif
-
-/*
- * Macros to detect individual cpu types.
- * These are only rarely needed.
- * cpu_is_omap330():	True for OMAP330
- * cpu_is_omap730():	True for OMAP730
- * cpu_is_omap850():	True for OMAP850
- * cpu_is_omap1510():	True for OMAP1510
- * cpu_is_omap1610():	True for OMAP1610
- * cpu_is_omap1611():	True for OMAP1611
- * cpu_is_omap5912():	True for OMAP5912
- * cpu_is_omap1621():	True for OMAP1621
- * cpu_is_omap1710():	True for OMAP1710
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
- */
-#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
-
-#define IS_OMAP_TYPE(type, id)				\
-static inline int is_omap ##type (void)			\
-{							\
-	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
-}
-
-IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(850, 0x0850)
-IS_OMAP_TYPE(1510, 0x1510)
-IS_OMAP_TYPE(1610, 0x1610)
-IS_OMAP_TYPE(1611, 0x1611)
-IS_OMAP_TYPE(5912, 0x1611)
-IS_OMAP_TYPE(1621, 0x1621)
-IS_OMAP_TYPE(1710, 0x1710)
-IS_OMAP_TYPE(2420, 0x2420)
-IS_OMAP_TYPE(2422, 0x2422)
-IS_OMAP_TYPE(2423, 0x2423)
-IS_OMAP_TYPE(2430, 0x2430)
-IS_OMAP_TYPE(3430, 0x3430)
-
-#define cpu_is_omap310()		0
-#define cpu_is_omap730()		0
-#define cpu_is_omap850()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap5912()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-
-/*
- * Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
- */
-
-#if defined(CONFIG_ARCH_OMAP730)
-# undef  cpu_is_omap730
-# define cpu_is_omap730()		is_omap730()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP850)
-# undef  cpu_is_omap850
-# define cpu_is_omap850()		is_omap850()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP15XX)
-# undef  cpu_is_omap310
-# undef  cpu_is_omap1510
-# define cpu_is_omap310()		is_omap310()
-# define cpu_is_omap1510()		is_omap1510()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP16XX)
-# undef  cpu_is_omap1610
-# undef  cpu_is_omap1611
-# undef  cpu_is_omap5912
-# undef  cpu_is_omap1621
-# undef  cpu_is_omap1710
-# define cpu_is_omap1610()		is_omap1610()
-# define cpu_is_omap1611()		is_omap1611()
-# define cpu_is_omap5912()		is_omap5912()
-# define cpu_is_omap1621()		is_omap1621()
-# define cpu_is_omap1710()		is_omap1710()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP24XX)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP34XX)
-# undef cpu_is_omap3430
-# define cpu_is_omap3430()		is_omap3430()
-#endif
-
-# if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# define cpu_is_omap44xx()		1
-# define cpu_is_omap443x()		1
-# endif
-
-/* Macros to detect if we have OMAP1 or OMAP2 */
-#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
-				cpu_is_omap16xx())
-#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx())
-
-/* Various silicon revisions for omap2 */
-#define OMAP242X_CLASS		0x24200024
-#define OMAP2420_REV_ES1_0	0x24200024
-#define OMAP2420_REV_ES2_0	0x24201024
-
-#define OMAP243X_CLASS		0x24300024
-#define OMAP2430_REV_ES1_0	0x24300024
-
-#define OMAP343X_CLASS		0x34300034
-#define OMAP3430_REV_ES1_0	0x34300034
-#define OMAP3430_REV_ES2_0	0x34301034
-#define OMAP3430_REV_ES2_1	0x34302034
-#define OMAP3430_REV_ES3_0	0x34303034
-#define OMAP3430_REV_ES3_1	0x34304034
-
-#define OMAP443X_CLASS		0x44300034
-
-/*
- * omap_chip bits
- *
- * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
- * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
- * something that is only valid on that particular ES revision.
- *
- * These bits may be ORed together to indicate structures that are
- * available on multiple chip types.
- *
- * To test whether a particular structure matches the current OMAP chip type,
- * use omap_chip_is().
- *
- */
-#define CHIP_IS_OMAP2420		(1 << 0)
-#define CHIP_IS_OMAP2430		(1 << 1)
-#define CHIP_IS_OMAP3430		(1 << 2)
-#define CHIP_IS_OMAP3430ES1		(1 << 3)
-#define CHIP_IS_OMAP3430ES2		(1 << 4)
-#define CHIP_IS_OMAP3430ES3_0		(1 << 5)
-#define CHIP_IS_OMAP3430ES3_1		(1 << 6)
-
-#define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
-
-/*
- * "GE" here represents "greater than or equal to" in terms of ES
- * levels.  So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
- * chips at ES2 and beyond, but not, for example, any OMAP lines after
- * OMAP3.
- */
-#define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
-					 CHIP_IS_OMAP3430ES3_0 | \
-					 CHIP_IS_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1)
-
-
-int omap_chip_is(struct omap_chip_id oci);
-void omap2_check_revision(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
deleted file mode 100644
index ac24050..0000000
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/* arch/arm/plat-omap/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00004000	@ UART 3
-#endif
-
-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
-		orr	\rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
-		add	\rx, \rx, #0x00002000	@ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		add	\rx, \rx, #0x00fb0000	@ UART 3
-		add	\rx, \rx, #0x00006000
-#endif
-#endif
-		.endm
-
-		.macro	senduart,rd,rx
-		strb	\rd, [\rx]
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		beq	1002f
-		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
-		and	\rd, \rd, #0x60
-		teq	\rd, #0x60
-		bne	1001b
-1002:
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
deleted file mode 100644
index 72f680b..0000000
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/dma.h
- *
- *  Copyright (C) 2003 Nokia Corporation
- *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE			(0xfffed800)
-
-#define OMAP1_DMA_GCR			0x400
-#define OMAP1_DMA_GSCR			0x404
-#define OMAP1_DMA_GRST			0x408
-#define OMAP1_DMA_HW_ID			0x442
-#define OMAP1_DMA_PCH2_ID		0x444
-#define OMAP1_DMA_PCH0_ID		0x446
-#define OMAP1_DMA_PCH1_ID		0x448
-#define OMAP1_DMA_PCHG_ID		0x44a
-#define OMAP1_DMA_PCHD_ID		0x44c
-#define OMAP1_DMA_CAPS_0_U		0x44e
-#define OMAP1_DMA_CAPS_0_L		0x450
-#define OMAP1_DMA_CAPS_1_U		0x452
-#define OMAP1_DMA_CAPS_1_L		0x454
-#define OMAP1_DMA_CAPS_2		0x456
-#define OMAP1_DMA_CAPS_3		0x458
-#define OMAP1_DMA_CAPS_4		0x45a
-#define OMAP1_DMA_PCH2_SR		0x460
-#define OMAP1_DMA_PCH0_SR		0x480
-#define OMAP1_DMA_PCH1_SR		0x482
-#define OMAP1_DMA_PCHD_SR		0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
-#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION		0x00
-#define OMAP_DMA4_GCR			0x78
-#define OMAP_DMA4_IRQSTATUS_L0		0x08
-#define OMAP_DMA4_IRQSTATUS_L1		0x0c
-#define OMAP_DMA4_IRQSTATUS_L2		0x10
-#define OMAP_DMA4_IRQSTATUS_L3		0x14
-#define OMAP_DMA4_IRQENABLE_L0		0x18
-#define OMAP_DMA4_IRQENABLE_L1		0x1c
-#define OMAP_DMA4_IRQENABLE_L2		0x20
-#define OMAP_DMA4_IRQENABLE_L3		0x24
-#define OMAP_DMA4_SYSSTATUS		0x28
-#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
-#define OMAP_DMA4_CAPS_0		0x64
-#define OMAP_DMA4_CAPS_2		0x6c
-#define OMAP_DMA4_CAPS_3		0x70
-#define OMAP_DMA4_CAPS_4		0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
-#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
-#define OMAP1_DMA_CCEN(n)		0
-#define OMAP1_DMA_CCFN(n)		0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
-
-/* Additional registers available on OMAP4 */
-#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
-#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
-#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION		0
-#define OMAP1_DMA_IRQSTATUS_L0		0
-#define OMAP1_DMA_IRQENABLE_L0		0
-#define OMAP1_DMA_OCP_SYSCONFIG		0
-#define OMAP_DMA4_HW_ID			0
-#define OMAP_DMA4_CAPS_0_L		0
-#define OMAP_DMA4_CAPS_0_U		0
-#define OMAP_DMA4_CAPS_1_L		0
-#define OMAP_DMA4_CAPS_1_U		0
-#define OMAP_DMA4_GSCR			0
-#define OMAP_DMA4_CPC(n)		0
-
-#define OMAP_DMA4_LCH_CTRL(n)		0
-#define OMAP_DMA4_COLOR_L(n)		0
-#define OMAP_DMA4_COLOR_U(n)		0
-#define OMAP_DMA4_CCR2(n)		0
-#define OMAP1_DMA_CSSA(n)		0
-#define OMAP1_DMA_CDSA(n)		0
-#define OMAP_DMA4_CSSA_L(n)		0
-#define OMAP_DMA4_CSSA_U(n)		0
-#define OMAP_DMA4_CDSA_L(n)		0
-#define OMAP_DMA4_CDSA_U(n)		0
-#define OMAP1_DMA_COLOR(n)		0
-
-/*----------------------------------------------------------------------------*/
-
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
-/* DMA channels for 24xx */
-#define OMAP24XX_DMA_NO_DEVICE		0
-#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
-#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
-#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
-#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
-#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
-#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
-#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
-#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
-#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
-#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
-#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
-#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
-#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
-#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
-#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
-#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
-#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
-#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
-#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
-#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
-#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
-#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
-#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
-#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
-#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
-#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
-#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
-#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
-#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
-#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
-#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
-#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
-#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
-#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
-#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
-#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
-#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
-#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
-#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
-#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
-#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
-#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
-#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
-#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
-#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
-#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
-#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
-#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
-#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
-#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
-#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
-#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
-#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
-#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
-#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
-#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
-#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
-
-/* DMA request lines for 44xx */
-#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
-#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
-#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
-#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
-#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
-#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
-#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
-#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
-#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
-#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
-#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
-#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
-#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
-#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
-#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
-#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
-#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
-#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
-#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
-#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
-#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
-#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
-#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
-#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
-#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
-#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
-#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
-#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
-#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
-#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
-#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
-#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
-#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
-#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
-#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
-#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
-#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
-#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
-#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
-#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
-#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
-#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
-#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
-#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
-#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
-#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
-#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
-#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
-#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
-#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
-#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
-#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
-#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
-#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
-#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
-#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
-#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
-#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
-#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
-#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
-#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
-#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
-#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
-#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
-#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
-#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
-#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
-#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
-#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
-#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
-#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
-#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
-#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
-
-/*----------------------------------------------------------------------------*/
-
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
-#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
-#define OMAP_DMA_DROP_IRQ		(1 << 1)
-#define OMAP_DMA_HALF_IRQ		(1 << 2)
-#define OMAP_DMA_FRAME_IRQ		(1 << 3)
-#define OMAP_DMA_LAST_IRQ		(1 << 4)
-#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
-#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
-#define OMAP2_DMA_PKT_IRQ		(1 << 7)
-#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
-#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
-#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
-#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
-
-#define OMAP_DMA_DATA_TYPE_S8		0x00
-#define OMAP_DMA_DATA_TYPE_S16		0x01
-#define OMAP_DMA_DATA_TYPE_S32		0x02
-
-#define OMAP_DMA_SYNC_ELEMENT		0x00
-#define OMAP_DMA_SYNC_FRAME		0x01
-#define OMAP_DMA_SYNC_BLOCK		0x02
-#define OMAP_DMA_SYNC_PACKET		0x03
-
-#define OMAP_DMA_SRC_SYNC		0x01
-#define OMAP_DMA_DST_SYNC		0x00
-
-#define OMAP_DMA_PORT_EMIFF		0x00
-#define OMAP_DMA_PORT_EMIFS		0x01
-#define OMAP_DMA_PORT_OCP_T1		0x02
-#define OMAP_DMA_PORT_TIPB		0x03
-#define OMAP_DMA_PORT_OCP_T2		0x04
-#define OMAP_DMA_PORT_MPUI		0x05
-
-#define OMAP_DMA_AMODE_CONSTANT		0x00
-#define OMAP_DMA_AMODE_POST_INC		0x01
-#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
-#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
-
-#define DMA_DEFAULT_FIFO_DEPTH		0x10
-#define DMA_DEFAULT_ARB_RATE		0x01
-/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
-#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
-#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
-#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
-#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
-#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
-#define DMA_THREAD_FIFO_75		(0x01 << 14)
-#define DMA_THREAD_FIFO_25		(0x02 << 14)
-#define DMA_THREAD_FIFO_50		(0x03 << 14)
-
-/* DMA4_OCP_SYSCONFIG bits */
-#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
-#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
-#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
-#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
-#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
-#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
-
-#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
-#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
-
-#define DMA_IDLEMODE_SMARTIDLE			0x2
-#define DMA_IDLEMODE_NO_IDLE			0x1
-#define DMA_IDLEMODE_FORCE_IDLE			0x0
-
-/* Chaining modes*/
-#ifndef CONFIG_ARCH_OMAP1
-#define OMAP_DMA_STATIC_CHAIN		0x1
-#define OMAP_DMA_DYNAMIC_CHAIN		0x2
-#define OMAP_DMA_CHAIN_ACTIVE		0x1
-#define OMAP_DMA_CHAIN_INACTIVE		0x0
-#endif
-
-#define DMA_CH_PRIO_HIGH		0x1
-#define DMA_CH_PRIO_LOW			0x0 /* Def */
-
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
-enum omap_dma_burst_mode {
-	OMAP_DMA_DATA_BURST_DIS = 0,
-	OMAP_DMA_DATA_BURST_4,
-	OMAP_DMA_DATA_BURST_8,
-	OMAP_DMA_DATA_BURST_16,
-};
-
-enum end_type {
-	OMAP_DMA_LITTLE_ENDIAN = 0,
-	OMAP_DMA_BIG_ENDIAN
-};
-
-enum omap_dma_color_mode {
-	OMAP_DMA_COLOR_DIS = 0,
-	OMAP_DMA_CONSTANT_FILL,
-	OMAP_DMA_TRANSPARENT_COPY
-};
-
-enum omap_dma_write_mode {
-	OMAP_DMA_WRITE_NON_POSTED = 0,
-	OMAP_DMA_WRITE_POSTED,
-	OMAP_DMA_WRITE_LAST_NON_POSTED
-};
-
-enum omap_dma_channel_mode {
-	OMAP_DMA_LCH_2D = 0,
-	OMAP_DMA_LCH_G,
-	OMAP_DMA_LCH_P,
-	OMAP_DMA_LCH_PD
-};
-
-struct omap_dma_channel_params {
-	int data_type;		/* data type 8,16,32 */
-	int elem_count;		/* number of elements in a frame */
-	int frame_count;	/* number of frames in a element */
-
-	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int src_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long src_start;	/* source address : physical */
-	int src_ei;		/* source element index */
-	int src_fi;		/* source frame index */
-
-	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
-	int dst_amode;		/* constant, post increment, indexed,
-					double indexed */
-	unsigned long dst_start;	/* source address : physical */
-	int dst_ei;		/* source element index */
-	int dst_fi;		/* source frame index */
-
-	int trigger;		/* trigger attached if the channel is
-					synchronized */
-	int sync_mode;		/* sycn on element, frame , block or packet */
-	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
-
-	int ie;			/* interrupt enabled */
-
-	unsigned char read_prio;/* read priority */
-	unsigned char write_prio;/* write priority */
-
-#ifndef CONFIG_ARCH_OMAP1
-	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
-#endif
-};
-
-
-extern void omap_set_dma_priority(int lch, int dst_port, int priority);
-extern int omap_request_dma(int dev_id, const char *dev_name,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data, int *dma_ch);
-extern void omap_enable_dma_irq(int ch, u16 irq_bits);
-extern void omap_disable_dma_irq(int ch, u16 irq_bits);
-extern void omap_free_dma(int ch);
-extern void omap_start_dma(int lch);
-extern void omap_stop_dma(int lch);
-extern void omap_set_dma_transfer_params(int lch, int data_type,
-					 int elem_count, int frame_count,
-					 int sync_mode,
-					 int dma_trigger, int src_or_dst_synch);
-extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
-				    u32 color);
-extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
-extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
-
-extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
-				    unsigned long src_start,
-				    int src_ei, int src_fi);
-extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_src_data_pack(int lch, int enable);
-extern void omap_set_dma_src_burst_mode(int lch,
-					enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
-				     unsigned long dest_start,
-				     int dst_ei, int dst_fi);
-extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
-extern void omap_set_dma_dest_data_pack(int lch, int enable);
-extern void omap_set_dma_dest_burst_mode(int lch,
-					 enum omap_dma_burst_mode burst_mode);
-
-extern void omap_set_dma_params(int lch,
-				struct omap_dma_channel_params *params);
-
-extern void omap_dma_link_lch(int lch_head, int lch_queue);
-extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
-
-extern int omap_set_dma_callback(int lch,
-			void (*callback)(int lch, u16 ch_status, void *data),
-			void *data);
-extern dma_addr_t omap_get_dma_src_pos(int lch);
-extern dma_addr_t omap_get_dma_dst_pos(int lch);
-extern void omap_clear_dma(int lch);
-extern int omap_get_dma_active_status(int lch);
-extern int omap_dma_running(void);
-extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
-				       int tparams);
-extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
-				 unsigned char write_prio);
-extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
-extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
-extern int omap_get_dma_index(int lch, int *ei, int *fi);
-
-/* Chaining APIs */
-#ifndef CONFIG_ARCH_OMAP1
-extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int lch, u16 ch_status,
-						    void *data),
-				  int *chain_id, int no_of_chans,
-				  int chain_mode,
-				  struct omap_dma_channel_params params);
-extern int omap_free_dma_chain(int chain_id);
-extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
-				     int dest_start, int elem_count,
-				     int frame_count, void *callbk_data);
-extern int omap_start_dma_chain_transfers(int chain_id);
-extern int omap_stop_dma_chain_transfers(int chain_id);
-extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
-extern int omap_get_dma_chain_dst_pos(int chain_id);
-extern int omap_get_dma_chain_src_pos(int chain_id);
-
-extern int omap_modify_dma_chain_params(int chain_id,
-					struct omap_dma_channel_params params);
-extern int omap_dma_chain_status(int chain_id);
-#endif
-
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
-
-#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
deleted file mode 100644
index a559299..0000000
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
-
-/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
-#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
-#include <mach/omap44xx.h>
-#endif
-#define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
-
-		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#ifndef CONFIG_ARCH_OMAP4
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP2_VA_IC_BASE
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	2222f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-2222:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-		.endm
-#else
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an
-		 * interrupt if it's between 30 and 1020.  The test_for_ipi
-		 * routine below will pick up on IPIs.
-		 * A simple read from the controller will tell us the number
-		 * of the highest priority enabled interrupt.
-		 * We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr     \base, =OMAP44XX_VA_GIC_CPU_BASE
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-
-		ldr     \tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		itt	eq
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
-#endif
-
-		.macro	irq_prio_table
-		.endm
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
deleted file mode 100644
index 633ff68..0000000
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpio.h
- *
- * OMAP GPIO handling defines and functions
- *
- * Copyright (C) 2003-2005 Nokia Corporation
- *
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIO_H
-#define __ASM_ARCH_OMAP_GPIO_H
-
-#include <linux/io.h>
-#include <mach/irqs.h>
-
-#define OMAP1_MPUIO_BASE			0xfffb5000
-
-#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
-
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x02
-#define OMAP_MPUIO_IO_CNTL		0x04
-#define OMAP_MPUIO_KBR_LATCH		0x08
-#define OMAP_MPUIO_KBC			0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
-#define OMAP_MPUIO_KBD_INT		0x10
-#define OMAP_MPUIO_GPIO_INT		0x12
-#define OMAP_MPUIO_KBD_MASKIT		0x14
-#define OMAP_MPUIO_GPIO_MASKIT		0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
-#define OMAP_MPUIO_LATCH		0x1a
-#else
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x04
-#define OMAP_MPUIO_IO_CNTL		0x08
-#define OMAP_MPUIO_KBR_LATCH		0x10
-#define OMAP_MPUIO_KBC			0x14
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
-#define OMAP_MPUIO_KBD_INT		0x20
-#define OMAP_MPUIO_GPIO_INT		0x24
-#define OMAP_MPUIO_KBD_MASKIT		0x28
-#define OMAP_MPUIO_GPIO_MASKIT		0x2c
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
-#define OMAP_MPUIO_LATCH		0x34
-#endif
-
-#define OMAP34XX_NR_GPIOS		6
-
-#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
-#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
-
-#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
-				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
-				 IH_GPIO_BASE + (nr))
-
-extern int omap_gpio_init(void);	/* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
- * which lets us plug in FPGA, I2C, and other implementations.
- * *
- * The original OMAP-specfic calls should eventually be removed.
- */
-
-#include <linux/errno.h>
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	int tmp;
-
-	/* omap1 SOC mpuio */
-	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
-		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-
-	/* SOC gpio */
-	tmp = irq - IH_GPIO_BASE;
-	if (tmp < OMAP_MAX_GPIO_LINES)
-		return tmp;
-
-	/* we don't supply reverse mappings for non-SOC gpios */
-	return -EIO;
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
deleted file mode 100644
index 9c99cda..0000000
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * General-Purpose Memory Controller for OMAP2
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM		8
-
-#define GPMC_CS_CONFIG1		0x00
-#define GPMC_CS_CONFIG2		0x04
-#define GPMC_CS_CONFIG3		0x08
-#define GPMC_CS_CONFIG4		0x0c
-#define GPMC_CS_CONFIG5		0x10
-#define GPMC_CS_CONFIG6		0x14
-#define GPMC_CS_CONFIG7		0x18
-#define GPMC_CS_NAND_COMMAND	0x1c
-#define GPMC_CS_NAND_ADDRESS	0x20
-#define GPMC_CS_NAND_DATA	0x24
-
-#define GPMC_CONFIG		0x50
-#define GPMC_STATUS		0x54
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
-#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
-#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
-
-/*
- * Note that all values in this struct are in nanoseconds, while
- * the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
-	/* Minimum clock period for synchronous mode */
-	u16 sync_clk;
-
-	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
-	u16 cs_on;		/* Assertion time */
-	u16 cs_rd_off;		/* Read deassertion time */
-	u16 cs_wr_off;		/* Write deassertion time */
-
-	/* ADV signal timings corresponding to GPMC_CONFIG3 */
-	u16 adv_on;		/* Assertion time */
-	u16 adv_rd_off;		/* Read deassertion time */
-	u16 adv_wr_off;		/* Write deassertion time */
-
-	/* WE signals timings corresponding to GPMC_CONFIG4 */
-	u16 we_on;		/* WE assertion time */
-	u16 we_off;		/* WE deassertion time */
-
-	/* OE signals timings corresponding to GPMC_CONFIG4 */
-	u16 oe_on;		/* OE assertion time */
-	u16 oe_off;		/* OE deassertion time */
-
-	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
-	u16 page_burst_access;	/* Multiple access word delay */
-	u16 access;		/* Start-cycle to first data valid delay */
-	u16 rd_cycle;		/* Total read cycle time */
-	u16 wr_cycle;		/* Total write cycle time */
-
-	/* The following are only on OMAP3430 */
-	u16 wr_access;		/* WRACCESSTIME */
-	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
-};
-
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int dma_mode,
-					unsigned int u32_count, int is_write);
-extern void gpmc_prefetch_reset(void);
-extern int gpmc_prefetch_status(void);
-extern void __init gpmc_init(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
deleted file mode 100644
index 26c1fbf..0000000
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/hardware.h
- *
- * Hardware definitions for TI OMAP processors and boards
- *
- * NOTE: Please put device driver specific defines into a separate header
- *	 file for each driver.
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- *
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- *                          and Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP_HARDWARE_H
-#define __ASM_ARCH_OMAP_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#include <mach/cpu.h>
-#endif
-#include <mach/serial.h>
-
-/*
- * ---------------------------------------------------------------------------
- * Common definitions for all OMAP processors
- * NOTE: Put all processor or board specific parts to the special header
- *	 files.
- * ---------------------------------------------------------------------------
- */
-
-/*
- * ----------------------------------------------------------------------------
- * Timers
- * ----------------------------------------------------------------------------
- */
-#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
-#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
-#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
-#define MPU_TIMER_FREE		(1 << 6)
-#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
-#define MPU_TIMER_AR		(1 << 1)
-#define MPU_TIMER_ST		(1 << 0)
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE		(0xfffece00)
-#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
-
-#define CK_RATEF		1
-#define CK_IDLEF		2
-#define CK_ENABLEF		4
-#define CK_SELECTF		8
-#define SETARM_IDLE_SHIFT
-
-/* DPLL control registers */
-#define DPLL_CTL		(0xfffecf00)
-
-/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
-#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
-#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
-#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
-#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
-#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
-
-/*
- * ---------------------------------------------------------------------------
- * UPLD
- * ---------------------------------------------------------------------------
- */
-#define ULPD_REG_BASE		(0xfffe0800)
-#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
-#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
-#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
-#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
-#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
-#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
-#	define SOFT_UDC_REQ		(1 << 4)
-#	define SOFT_USB_CLK_REQ		(1 << 3)
-#	define SOFT_DPLL_REQ		(1 << 0)
-#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
-#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
-#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
-#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
-#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
-#	define DIS_MMC2_DPLL_REQ	(1 << 11)
-#	define DIS_MMC1_DPLL_REQ	(1 << 10)
-#	define DIS_UART3_DPLL_REQ	(1 << 9)
-#	define DIS_UART2_DPLL_REQ	(1 << 8)
-#	define DIS_UART1_DPLL_REQ	(1 << 7)
-#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
-#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
-#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
-
-/*
- * ---------------------------------------------------------------------------
- * Watchdog timer
- * ---------------------------------------------------------------------------
- */
-
-/* Watchdog timer within the OMAP3.2 gigacell */
-#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
-#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
-#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
-#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
-
-/*
- * ---------------------------------------------------------------------------
- * Interrupts
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_ARCH_OMAP1
-
-/*
- * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
- * or something similar.. -- PFM.
- */
-
-#define OMAP_IH1_BASE		0xfffecb00
-#define OMAP_IH2_BASE		0xfffe0000
-
-#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
-#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
-#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
-#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
-#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
-#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
-#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
-
-#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
-#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
-#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
-#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
-#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
-#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
-#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
-
-#define IRQ_ITR_REG_OFFSET	0x00
-#define IRQ_MIR_REG_OFFSET	0x04
-#define IRQ_SIR_IRQ_REG_OFFSET	0x10
-#define IRQ_SIR_FIQ_REG_OFFSET	0x14
-#define IRQ_CONTROL_REG_OFFSET	0x18
-#define IRQ_ISR_REG_OFFSET	0x9c
-#define IRQ_ILR0_REG_OFFSET	0x1c
-#define IRQ_GMR_REG_OFFSET	0xa0
-
-#endif
-
-/*
- * ----------------------------------------------------------------------------
- * System control registers
- * ----------------------------------------------------------------------------
- */
-#define MOD_CONF_CTRL_0		0xfffe1080
-#define MOD_CONF_CTRL_1		0xfffe1110
-
-/*
- * ----------------------------------------------------------------------------
- * Pin multiplexing registers
- * ----------------------------------------------------------------------------
- */
-#define FUNC_MUX_CTRL_0		0xfffe1000
-#define FUNC_MUX_CTRL_1		0xfffe1004
-#define FUNC_MUX_CTRL_2		0xfffe1008
-#define COMP_MODE_CTRL_0	0xfffe100c
-#define FUNC_MUX_CTRL_3		0xfffe1010
-#define FUNC_MUX_CTRL_4		0xfffe1014
-#define FUNC_MUX_CTRL_5		0xfffe1018
-#define FUNC_MUX_CTRL_6		0xfffe101C
-#define FUNC_MUX_CTRL_7		0xfffe1020
-#define FUNC_MUX_CTRL_8		0xfffe1024
-#define FUNC_MUX_CTRL_9		0xfffe1028
-#define FUNC_MUX_CTRL_A		0xfffe102C
-#define FUNC_MUX_CTRL_B		0xfffe1030
-#define FUNC_MUX_CTRL_C		0xfffe1034
-#define FUNC_MUX_CTRL_D		0xfffe1038
-#define PULL_DWN_CTRL_0		0xfffe1040
-#define PULL_DWN_CTRL_1		0xfffe1044
-#define PULL_DWN_CTRL_2		0xfffe1048
-#define PULL_DWN_CTRL_3		0xfffe104c
-#define PULL_DWN_CTRL_4		0xfffe10ac
-
-/* OMAP-1610 specific multiplexing registers */
-#define FUNC_MUX_CTRL_E		0xfffe1090
-#define FUNC_MUX_CTRL_F		0xfffe1094
-#define FUNC_MUX_CTRL_10	0xfffe1098
-#define FUNC_MUX_CTRL_11	0xfffe109c
-#define FUNC_MUX_CTRL_12	0xfffe10a0
-#define PU_PD_SEL_0		0xfffe10b4
-#define PU_PD_SEL_1		0xfffe10b8
-#define PU_PD_SEL_2		0xfffe10bc
-#define PU_PD_SEL_3		0xfffe10c0
-#define PU_PD_SEL_4		0xfffe10c4
-
-/* Timer32K for 1610 and 1710*/
-#define OMAP_TIMER32K_BASE	0xFFFBC400
-
-/*
- * ---------------------------------------------------------------------------
- * TIPB bus interface
- * ---------------------------------------------------------------------------
- */
-#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
-#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
-#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
-#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
-
-/*
- * ----------------------------------------------------------------------------
- * MPUI interface
- * ----------------------------------------------------------------------------
- */
-#define MPUI_BASE			(0xfffec900)
-#define MPUI_CTRL			(MPUI_BASE + 0x0)
-#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
-#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
-#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
-#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
-#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
-#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
-#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
-
-/*
- * ----------------------------------------------------------------------------
- * LED Pulse Generator
- * ----------------------------------------------------------------------------
- */
-#define OMAP_LPG1_BASE			0xfffbd000
-#define OMAP_LPG2_BASE			0xfffbd800
-#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
-#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
-#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
-#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
-
-/*
- * ----------------------------------------------------------------------------
- * Pulse-Width Light
- * ----------------------------------------------------------------------------
- */
-#define OMAP_PWL_BASE			0xfffb5800
-#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
-#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
-
-/*
- * ---------------------------------------------------------------------------
- * Processor specific defines
- * ---------------------------------------------------------------------------
- */
-
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap16xx.h"
-#include "omap24xx.h"
-#include "omap34xx.h"
-#include "omap44xx.h"
-
-#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
deleted file mode 100644
index 8d32df3..0000000
--- a/arch/arm/plat-omap/include/mach/io.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- *  06-12-1997	RMK	Created.
- *  07-04-1999	RMK	Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x)		(x)
-#else
-#define IOMEM(x)		((void __force __iomem *)(x))
-#endif
-
-#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
-
-#define OMAP2_IO_OFFSET		0x90000000
-#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap1 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1_IO_PHYS		0xFFFB0000
-#define OMAP1_IO_SIZE		0x40000
-#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap2 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
-#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
-#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
-
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
-#define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
-#define OMAP243X_GPMC_SIZE	SZ_1M
-#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
-#define OMAP243X_SDRC_SIZE	SZ_1M
-#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
-#define OMAP243X_SMS_SIZE	SZ_1M
-
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
-
-/*
- * ----------------------------------------------------------------------------
- * Omap3 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
-#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
-#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
-#define L4_WK_34XX_SIZE		SZ_1M
-
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
-#define L4_PER_34XX_SIZE	SZ_1M
-
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
-
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
-#define OMAP34XX_GPMC_SIZE	SZ_1M
-
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
-#define OMAP343X_SMS_SIZE	SZ_1M
-
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
-#define OMAP343X_SDRC_SIZE	SZ_1M
-
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
-
-/*
- * ----------------------------------------------------------------------------
- * Omap4 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS		L3_44XX_BASE
-#define L3_44XX_VIRT		0xd4000000
-#define L3_44XX_SIZE		SZ_1M
-
-#define L4_44XX_PHYS		L4_44XX_BASE
-#define L4_44XX_VIRT		0xda000000
-#define L4_44XX_SIZE		SZ_4M
-
-
-#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
-#define L4_WK_44XX_VIRT		0xda300000
-#define L4_WK_44XX_SIZE		SZ_1M
-
-#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
-#define L4_PER_44XX_VIRT	0xd8000000
-#define L4_PER_44XX_SIZE	SZ_4M
-
-#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-#define L4_EMU_44XX_VIRT	0xe4000000
-#define L4_EMU_44XX_SIZE	SZ_64M
-
-#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-#define OMAP44XX_GPMC_VIRT	0xe0000000
-#define OMAP44XX_GPMC_SIZE	SZ_1M
-
-
-/*
- * ----------------------------------------------------------------------------
- * Omap specific register access
- * ----------------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLER__
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-struct omap_sdrc_params;
-
-extern void omap1_map_common_io(void);
-extern void omap1_init_common_hw(void);
-
-extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
-				 struct omap_sdrc_params *sdrc_cs1);
-
-#define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
-#define __arch_iounmap(v)	omap_iounmap(v)
-
-void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
-void omap_iounmap(volatile void __iomem *addr);
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h
deleted file mode 100644
index 46d41ac..0000000
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * omap iommu: main structures
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_IOMMU_H
-#define __MACH_IOMMU_H
-
-struct iotlb_entry {
-	u32 da;
-	u32 pa;
-	u32 pgsz, prsvd, valid;
-	union {
-		u16 ap;
-		struct {
-			u32 endian, elsz, mixed;
-		};
-	};
-};
-
-struct iommu {
-	const char	*name;
-	struct module	*owner;
-	struct clk	*clk;
-	void __iomem	*regbase;
-	struct device	*dev;
-
-	unsigned int	refcount;
-	struct mutex	iommu_lock;	/* global for this whole object */
-
-	/*
-	 * We don't change iopgd for a situation like pgd for a task,
-	 * but share it globally for each iommu.
-	 */
-	u32		*iopgd;
-	spinlock_t	page_table_lock; /* protect iopgd */
-
-	int		nr_tlb_entries;
-
-	struct list_head	mmap;
-	struct mutex		mmap_lock; /* protect mmap */
-
-	int (*isr)(struct iommu *obj);
-
-	void *ctx; /* iommu context: registres saved area */
-};
-
-struct cr_regs {
-	union {
-		struct {
-			u16 cam_l;
-			u16 cam_h;
-		};
-		u32 cam;
-	};
-	union {
-		struct {
-			u16 ram_l;
-			u16 ram_h;
-		};
-		u32 ram;
-	};
-};
-
-struct iotlb_lock {
-	short base;
-	short vict;
-};
-
-/* architecture specific functions */
-struct iommu_functions {
-	unsigned long	version;
-
-	int (*enable)(struct iommu *obj);
-	void (*disable)(struct iommu *obj);
-	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
-
-	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
-	void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
-
-	struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
-	int (*cr_valid)(struct cr_regs *cr);
-	u32 (*cr_to_virt)(struct cr_regs *cr);
-	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
-	ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
-
-	u32 (*get_pte_attr)(struct iotlb_entry *e);
-
-	void (*save_ctx)(struct iommu *obj);
-	void (*restore_ctx)(struct iommu *obj);
-	ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
-};
-
-struct iommu_platform_data {
-	const char *name;
-	const char *clk_name;
-	const int nr_tlb_entries;
-};
-
-#if defined(CONFIG_ARCH_OMAP1)
-#error "iommu for this processor not implemented yet"
-#else
-#include <mach/iommu2.h>
-#endif
-
-/*
- * utilities for super page(16MB, 1MB, 64KB and 4KB)
- */
-
-#define iopgsz_max(bytes)			\
-	(((bytes) >= SZ_16M) ? SZ_16M :		\
-	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
-	 ((bytes) >= SZ_64K) ? SZ_64K :		\
-	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
-
-#define bytes_to_iopgsz(bytes)				\
-	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
-	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
-	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
-	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
-
-#define iopgsz_to_bytes(iopgsz)				\
-	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
-	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
-
-#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
-
-/*
- * global functions
- */
-extern u32 iommu_arch_version(void);
-
-extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
-extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
-
-extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
-extern void flush_iotlb_page(struct iommu *obj, u32 da);
-extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
-extern void flush_iotlb_all(struct iommu *obj);
-
-extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
-extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
-
-extern struct iommu *iommu_get(const char *name);
-extern void iommu_put(struct iommu *obj);
-
-extern void iommu_save_ctx(struct iommu *obj);
-extern void iommu_restore_ctx(struct iommu *obj);
-
-extern int install_iommu_arch(const struct iommu_functions *ops);
-extern void uninstall_iommu_arch(const struct iommu_functions *ops);
-
-extern int foreach_iommu_device(void *data,
-				int (*fn)(struct device *, void *));
-
-extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
-extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
-
-#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
deleted file mode 100644
index 28a1650..0000000
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ /dev/null
@@ -1,568 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/irqs.h
- *
- *  Copyright (C) Greg Lonnon 2001
- *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
- *	 are different.
- */
-
-#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
-#define __ASM_ARCH_OMAP15XX_IRQS_H
-
-/*
- * IRQ numbers for interrupt handler 1
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- *
- */
-#define INT_CAMERA		1
-#define INT_FIQ			3
-#define INT_RTDX		6
-#define INT_DSP_MMU_ABORT	7
-#define INT_HOST		8
-#define INT_ABORT		9
-#define INT_BRIDGE_PRIV		13
-#define INT_GPIO_BANK1		14
-#define INT_UART3		15
-#define INT_TIMER3		16
-#define INT_DMA_CH0_6		19
-#define INT_DMA_CH1_7		20
-#define INT_DMA_CH2_8		21
-#define INT_DMA_CH3		22
-#define INT_DMA_CH4		23
-#define INT_DMA_CH5		24
-#define INT_DMA_LCD		25
-#define INT_TIMER1		26
-#define INT_WD_TIMER		27
-#define INT_BRIDGE_PUB		28
-#define INT_TIMER2		30
-#define INT_LCD_CTRL		31
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1510_IH2_IRQ	0
-#define INT_1510_RES2		2
-#define INT_1510_SPI_TX		4
-#define INT_1510_SPI_RX		5
-#define INT_1510_DSP_MAILBOX1	10
-#define INT_1510_DSP_MAILBOX2	11
-#define INT_1510_RES12		12
-#define INT_1510_LB_MMU		17
-#define INT_1510_RES18		18
-#define INT_1510_LOCAL_BUS	29
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 1
- */
-#define INT_1610_IH2_IRQ	0
-#define INT_1610_IH2_FIQ	2
-#define INT_1610_McBSP2_TX	4
-#define INT_1610_McBSP2_RX	5
-#define INT_1610_DSP_MAILBOX1	10
-#define INT_1610_DSP_MAILBOX2	11
-#define INT_1610_LCD_LINE	12
-#define INT_1610_GPTIMER1	17
-#define INT_1610_GPTIMER2	18
-#define INT_1610_SSR_FIFO_0	29
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
- */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 1
- */
-#define INT_850_IH2_FIQ		0
-#define INT_850_IH2_IRQ		1
-#define INT_850_USB_NON_ISO	2
-#define INT_850_USB_ISO		3
-#define INT_850_ICR		4
-#define INT_850_EAC		5
-#define INT_850_GPIO_BANK1	6
-#define INT_850_GPIO_BANK2	7
-#define INT_850_GPIO_BANK3	8
-#define INT_850_McBSP2TX	10
-#define INT_850_McBSP2RX	11
-#define INT_850_McBSP2RX_OVF	12
-#define INT_850_LCD_LINE	14
-#define INT_850_GSM_PROTECT	15
-#define INT_850_TIMER3		16
-#define INT_850_GPIO_BANK5	17
-#define INT_850_GPIO_BANK6	18
-#define INT_850_SPGIO_WR	29
-
-
-/*
- * IRQ numbers for interrupt handler 2
- *
- * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
- */
-#define IH2_BASE		32
-
-#define INT_KEYBOARD		(1 + IH2_BASE)
-#define INT_uWireTX		(2 + IH2_BASE)
-#define INT_uWireRX		(3 + IH2_BASE)
-#define INT_I2C			(4 + IH2_BASE)
-#define INT_MPUIO		(5 + IH2_BASE)
-#define INT_USB_HHC_1		(6 + IH2_BASE)
-#define INT_McBSP3TX		(10 + IH2_BASE)
-#define INT_McBSP3RX		(11 + IH2_BASE)
-#define INT_McBSP1TX		(12 + IH2_BASE)
-#define INT_McBSP1RX		(13 + IH2_BASE)
-#define INT_UART1		(14 + IH2_BASE)
-#define INT_UART2		(15 + IH2_BASE)
-#define INT_BT_MCSI1TX		(16 + IH2_BASE)
-#define INT_BT_MCSI1RX		(17 + IH2_BASE)
-#define INT_SOSSI_MATCH		(19 + IH2_BASE)
-#define INT_USB_W2FC		(20 + IH2_BASE)
-#define INT_1WIRE		(21 + IH2_BASE)
-#define INT_OS_TIMER		(22 + IH2_BASE)
-#define INT_MMC			(23 + IH2_BASE)
-#define INT_GAUGE_32K		(24 + IH2_BASE)
-#define INT_RTC_TIMER		(25 + IH2_BASE)
-#define INT_RTC_ALARM		(26 + IH2_BASE)
-#define INT_MEM_STICK		(27 + IH2_BASE)
-
-/*
- * OMAP-1510 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1510_DSP_MMU	(28 + IH2_BASE)
-#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
-
-/*
- * OMAP-1610 specific IRQ numbers for interrupt handler 2
- */
-#define INT_1610_FAC		(0 + IH2_BASE)
-#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
-#define INT_1610_USB_OTG	(8 + IH2_BASE)
-#define INT_1610_SoSSI		(9 + IH2_BASE)
-#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
-#define INT_1610_DSP_MMU	(28 + IH2_BASE)
-#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
-#define INT_1610_STI		(32 + IH2_BASE)
-#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
-#define INT_1610_GPTIMER3	(34 + IH2_BASE)
-#define INT_1610_GPTIMER4	(35 + IH2_BASE)
-#define INT_1610_GPTIMER5	(36 + IH2_BASE)
-#define INT_1610_GPTIMER6	(37 + IH2_BASE)
-#define INT_1610_GPTIMER7	(38 + IH2_BASE)
-#define INT_1610_GPTIMER8	(39 + IH2_BASE)
-#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
-#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
-#define INT_1610_MMC2		(42 + IH2_BASE)
-#define INT_1610_CF		(43 + IH2_BASE)
-#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
-#define INT_1610_SPI		(49 + IH2_BASE)
-#define INT_1610_DMA_CH6	(53 + IH2_BASE)
-#define INT_1610_DMA_CH7	(54 + IH2_BASE)
-#define INT_1610_DMA_CH8	(55 + IH2_BASE)
-#define INT_1610_DMA_CH9	(56 + IH2_BASE)
-#define INT_1610_DMA_CH10	(57 + IH2_BASE)
-#define INT_1610_DMA_CH11	(58 + IH2_BASE)
-#define INT_1610_DMA_CH12	(59 + IH2_BASE)
-#define INT_1610_DMA_CH13	(60 + IH2_BASE)
-#define INT_1610_DMA_CH14	(61 + IH2_BASE)
-#define INT_1610_DMA_CH15	(62 + IH2_BASE)
-#define INT_1610_NAND		(63 + IH2_BASE)
-#define INT_1610_SHA1MD5	(91 + IH2_BASE)
-
-/*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 2
- */
-#define INT_850_HW_ERRORS	(0 + IH2_BASE)
-#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_850_CFCD		(2 + IH2_BASE)
-#define INT_850_CFIREQ		(3 + IH2_BASE)
-#define INT_850_I2C		(4 + IH2_BASE)
-#define INT_850_PCC		(5 + IH2_BASE)
-#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_850_SPI_100K_1	(7 + IH2_BASE)
-#define INT_850_SYREN_SPI	(8 + IH2_BASE)
-#define INT_850_VLYNQ		(9 + IH2_BASE)
-#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_850_McBSP1TX	(11 + IH2_BASE)
-#define INT_850_McBSP1RX	(12 + IH2_BASE)
-#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_850_MCSI		(16 + IH2_BASE)
-#define INT_850_uWireTX		(17 + IH2_BASE)
-#define INT_850_uWireRX		(18 + IH2_BASE)
-#define INT_850_SMC_CD		(19 + IH2_BASE)
-#define INT_850_SMC_IREQ	(20 + IH2_BASE)
-#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_850_TIMER32K	(22 + IH2_BASE)
-#define INT_850_MMC_SDIO	(23 + IH2_BASE)
-#define INT_850_UPLD		(24 + IH2_BASE)
-#define INT_850_USB_HHC_1	(27 + IH2_BASE)
-#define INT_850_USB_HHC_2	(28 + IH2_BASE)
-#define INT_850_USB_GENI	(29 + IH2_BASE)
-#define INT_850_USB_OTG		(30 + IH2_BASE)
-#define INT_850_CAMERA_IF	(31 + IH2_BASE)
-#define INT_850_RNG		(32 + IH2_BASE)
-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_850_SHA1_MD5	(36 + IH2_BASE)
-#define INT_850_SPI_100K_2	(37 + IH2_BASE)
-#define INT_850_RNG_IDLE	(38 + IH2_BASE)
-#define INT_850_MPUIO		(39 + IH2_BASE)
-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_850_DMA_CH6		(53 + IH2_BASE)
-#define INT_850_DMA_CH7		(54 + IH2_BASE)
-#define INT_850_DMA_CH8		(55 + IH2_BASE)
-#define INT_850_DMA_CH9		(56 + IH2_BASE)
-#define INT_850_DMA_CH10	(57 + IH2_BASE)
-#define INT_850_DMA_CH11	(58 + IH2_BASE)
-#define INT_850_DMA_CH12	(59 + IH2_BASE)
-#define INT_850_DMA_CH13	(60 + IH2_BASE)
-#define INT_850_DMA_CH14	(61 + IH2_BASE)
-#define INT_850_DMA_CH15	(62 + IH2_BASE)
-#define INT_850_NAND		(63 + IH2_BASE)
-
-#define INT_24XX_SYS_NIRQ	7
-#define INT_24XX_SDMA_IRQ0	12
-#define INT_24XX_SDMA_IRQ1	13
-#define INT_24XX_SDMA_IRQ2	14
-#define INT_24XX_SDMA_IRQ3	15
-#define INT_24XX_CAM_IRQ	24
-#define INT_24XX_DSS_IRQ	25
-#define INT_24XX_MAIL_U0_MPU	26
-#define INT_24XX_DSP_UMA	27
-#define INT_24XX_DSP_MMU	28
-#define INT_24XX_GPIO_BANK1	29
-#define INT_24XX_GPIO_BANK2	30
-#define INT_24XX_GPIO_BANK3	31
-#define INT_24XX_GPIO_BANK4	32
-#define INT_24XX_GPIO_BANK5	33
-#define INT_24XX_MAIL_U3_MPU	34
-#define INT_24XX_GPTIMER1	37
-#define INT_24XX_GPTIMER2	38
-#define INT_24XX_GPTIMER3	39
-#define INT_24XX_GPTIMER4	40
-#define INT_24XX_GPTIMER5	41
-#define INT_24XX_GPTIMER6	42
-#define INT_24XX_GPTIMER7	43
-#define INT_24XX_GPTIMER8	44
-#define INT_24XX_GPTIMER9	45
-#define INT_24XX_GPTIMER10	46
-#define INT_24XX_GPTIMER11	47
-#define INT_24XX_GPTIMER12	48
-#define INT_24XX_SHA1MD5	51
-#define INT_24XX_MCBSP4_IRQ_TX	54
-#define INT_24XX_MCBSP4_IRQ_RX	55
-#define INT_24XX_I2C1_IRQ	56
-#define INT_24XX_I2C2_IRQ	57
-#define INT_24XX_HDQ_IRQ	58
-#define INT_24XX_MCBSP1_IRQ_TX	59
-#define INT_24XX_MCBSP1_IRQ_RX	60
-#define INT_24XX_MCBSP2_IRQ_TX	62
-#define INT_24XX_MCBSP2_IRQ_RX	63
-#define INT_24XX_SPI1_IRQ	65
-#define INT_24XX_SPI2_IRQ	66
-#define INT_24XX_UART1_IRQ	72
-#define INT_24XX_UART2_IRQ	73
-#define INT_24XX_UART3_IRQ	74
-#define INT_24XX_USB_IRQ_GEN	75
-#define INT_24XX_USB_IRQ_NISO	76
-#define INT_24XX_USB_IRQ_ISO	77
-#define INT_24XX_USB_IRQ_HGEN	78
-#define INT_24XX_USB_IRQ_HSOF	79
-#define INT_24XX_USB_IRQ_OTG	80
-#define INT_24XX_MCBSP5_IRQ_TX	81
-#define INT_24XX_MCBSP5_IRQ_RX	82
-#define INT_24XX_MMC_IRQ	83
-#define INT_24XX_MMC2_IRQ	86
-#define INT_24XX_MCBSP3_IRQ_TX	89
-#define INT_24XX_MCBSP3_IRQ_RX	90
-#define INT_24XX_SPI3_IRQ	91
-
-#define INT_243X_MCBSP2_IRQ	16
-#define INT_243X_MCBSP3_IRQ	17
-#define INT_243X_MCBSP4_IRQ	18
-#define INT_243X_MCBSP5_IRQ	19
-#define INT_243X_MCBSP1_IRQ	64
-#define INT_243X_HS_USB_MC	92
-#define INT_243X_HS_USB_DMA	93
-#define INT_243X_CARKIT_IRQ	94
-
-#define INT_34XX_BENCH_MPU_EMUL	3
-#define INT_34XX_ST_MCBSP2_IRQ	4
-#define INT_34XX_ST_MCBSP3_IRQ	5
-#define INT_34XX_SSM_ABORT_IRQ	6
-#define INT_34XX_SYS_NIRQ	7
-#define INT_34XX_D2D_FW_IRQ	8
-#define INT_34XX_PRCM_MPU_IRQ	11
-#define INT_34XX_MCBSP1_IRQ	16
-#define INT_34XX_MCBSP2_IRQ	17
-#define INT_34XX_MCBSP3_IRQ	22
-#define INT_34XX_MCBSP4_IRQ	23
-#define INT_34XX_CAM_IRQ	24
-#define INT_34XX_MCBSP5_IRQ	27
-#define INT_34XX_GPIO_BANK1	29
-#define INT_34XX_GPIO_BANK2	30
-#define INT_34XX_GPIO_BANK3	31
-#define INT_34XX_GPIO_BANK4	32
-#define INT_34XX_GPIO_BANK5	33
-#define INT_34XX_GPIO_BANK6	34
-#define INT_34XX_USIM_IRQ	35
-#define INT_34XX_WDT3_IRQ	36
-#define INT_34XX_SPI4_IRQ	48
-#define INT_34XX_SHA1MD52_IRQ	49
-#define INT_34XX_FPKA_READY_IRQ	50
-#define INT_34XX_SHA1MD51_IRQ	51
-#define INT_34XX_RNG_IRQ	52
-#define INT_34XX_I2C3_IRQ	61
-#define INT_34XX_FPKA_ERROR_IRQ	64
-#define INT_34XX_PBIAS_IRQ	75
-#define INT_34XX_OHCI_IRQ	76
-#define INT_34XX_EHCI_IRQ	77
-#define INT_34XX_TLL_IRQ	78
-#define INT_34XX_PARTHASH_IRQ	79
-#define INT_34XX_MMC3_IRQ	94
-#define INT_34XX_GPT12_IRQ	95
-
-#define	INT_34XX_BENCH_MPU_EMUL	3
-
-
-#define IRQ_GIC_START		32
-#define INT_44XX_LOCALTIMER_IRQ	29
-#define INT_44XX_LOCALWDT_IRQ	30
-
-#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
-#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
-#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
-#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
-#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
-#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
-#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
-#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
-#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
-#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
-#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
-#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
-#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
-#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
-#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
-#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
-#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
-#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
-#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
-#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
-#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
-#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
-#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
-
-#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
-#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
-#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
-
-#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
-#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
-#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
-#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
-#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
-#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
-#define INT_44XX_MMC5_IRQ	(59 + IRQ_GIC_START)
-#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
-#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
-#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
-#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
-#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
-#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
-#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
-#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
-#define INT_44XX_MMC4_IRQ	(96 + IRQ_GIC_START)
-
-
-/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
- * 16 MPUIO lines */
-#define OMAP_MAX_GPIO_LINES	192
-#define IH_GPIO_BASE		(128 + IH2_BASE)
-#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
-#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
-
-/* External FPGA handles interrupts on Innovator boards */
-#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
-#ifdef	CONFIG_MACH_OMAP_INNOVATOR
-#define OMAP_FPGA_NR_IRQS	24
-#else
-#define OMAP_FPGA_NR_IRQS	0
-#endif
-#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
-
-/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
-#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
-#ifdef	CONFIG_TWL4030_CORE
-#define	TWL4030_BASE_NR_IRQS	8
-#define	TWL4030_PWR_NR_IRQS	8
-#else
-#define	TWL4030_BASE_NR_IRQS	0
-#define	TWL4030_PWR_NR_IRQS	0
-#endif
-#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
-#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
-#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
-
-/* External TWL4030 gpio interrupts are optional */
-#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
-#ifdef	CONFIG_GPIO_TWL4030
-#define TWL4030_GPIO_NR_IRQS	18
-#else
-#define	TWL4030_GPIO_NR_IRQS	0
-#endif
-#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
-
-/* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS			TWL4030_GPIO_IRQ_END
-
-#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
-
-#ifndef __ASSEMBLY__
-extern void omap_init_irq(void);
-extern int omap_irq_pending(void);
-#endif
-
-#include <mach/hardware.h>
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
deleted file mode 100644
index b7a6991..0000000
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* mailbox.h */
-
-#ifndef MAILBOX_H
-#define MAILBOX_H
-
-#include <linux/wait.h>
-#include <linux/workqueue.h>
-#include <linux/blkdev.h>
-
-typedef u32 mbox_msg_t;
-typedef void (mbox_receiver_t)(mbox_msg_t msg);
-struct omap_mbox;
-
-typedef int __bitwise omap_mbox_irq_t;
-#define IRQ_TX ((__force omap_mbox_irq_t) 1)
-#define IRQ_RX ((__force omap_mbox_irq_t) 2)
-
-typedef int __bitwise omap_mbox_type_t;
-#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
-#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
-
-struct omap_mbox_ops {
-	omap_mbox_type_t	type;
-	int		(*startup)(struct omap_mbox *mbox);
-	void		(*shutdown)(struct omap_mbox *mbox);
-	/* fifo */
-	mbox_msg_t	(*fifo_read)(struct omap_mbox *mbox);
-	void		(*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
-	int		(*fifo_empty)(struct omap_mbox *mbox);
-	int		(*fifo_full)(struct omap_mbox *mbox);
-	/* irq */
-	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	/* ctx */
-	void		(*save_ctx)(struct omap_mbox *mbox);
-	void		(*restore_ctx)(struct omap_mbox *mbox);
-};
-
-struct omap_mbox_queue {
-	spinlock_t		lock;
-	struct request_queue	*queue;
-	struct work_struct	work;
-	int	(*callback)(void *);
-	struct omap_mbox	*mbox;
-};
-
-struct omap_mbox {
-	char			*name;
-	unsigned int		irq;
-
-	struct omap_mbox_queue	*txq, *rxq;
-
-	struct omap_mbox_ops	*ops;
-
-	mbox_msg_t		seq_snd, seq_rcv;
-
-	struct device		*dev;
-
-	struct omap_mbox	*next;
-	void			*priv;
-
-	void			(*err_notify)(void);
-};
-
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
-void omap_mbox_init_seq(struct omap_mbox *);
-
-struct omap_mbox *omap_mbox_get(const char *);
-void omap_mbox_put(struct omap_mbox *);
-
-int omap_mbox_register(struct device *parent, struct omap_mbox *);
-int omap_mbox_unregister(struct omap_mbox *);
-
-static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
-{
-	if (!mbox->ops->save_ctx) {
-		dev_err(mbox->dev, "%s:\tno save\n", __func__);
-		return;
-	}
-
-	mbox->ops->save_ctx(mbox);
-}
-
-static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
-{
-	if (!mbox->ops->restore_ctx) {
-		dev_err(mbox->dev, "%s:\tno restore\n", __func__);
-		return;
-	}
-
-	mbox->ops->restore_ctx(mbox);
-}
-
-#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
deleted file mode 100644
index e0d6eca..0000000
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ /dev/null
@@ -1,462 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mcbsp.h
- *
- * Defines for Multi-Channel Buffered Serial Port
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __ASM_ARCH_OMAP_MCBSP_H
-#define __ASM_ARCH_OMAP_MCBSP_H
-
-#include <linux/completion.h>
-#include <linux/spinlock.h>
-
-#include <mach/hardware.h>
-#include <mach/clock.h>
-
-#define OMAP730_MCBSP1_BASE	0xfffb1000
-#define OMAP730_MCBSP2_BASE	0xfffb1800
-
-#define OMAP1510_MCBSP1_BASE	0xe1011800
-#define OMAP1510_MCBSP2_BASE	0xfffb1000
-#define OMAP1510_MCBSP3_BASE	0xe1017000
-
-#define OMAP1610_MCBSP1_BASE	0xe1011800
-#define OMAP1610_MCBSP2_BASE	0xfffb1000
-#define OMAP1610_MCBSP3_BASE	0xe1017000
-
-#define OMAP24XX_MCBSP1_BASE	0x48074000
-#define OMAP24XX_MCBSP2_BASE	0x48076000
-#define OMAP2430_MCBSP3_BASE	0x4808c000
-#define OMAP2430_MCBSP4_BASE	0x4808e000
-#define OMAP2430_MCBSP5_BASE	0x48096000
-
-#define OMAP34XX_MCBSP1_BASE	0x48074000
-#define OMAP34XX_MCBSP2_BASE	0x49022000
-#define OMAP34XX_MCBSP3_BASE	0x49024000
-#define OMAP34XX_MCBSP4_BASE	0x49026000
-#define OMAP34XX_MCBSP5_BASE	0x48096000
-
-#define OMAP44XX_MCBSP1_BASE	0x49022000
-#define OMAP44XX_MCBSP2_BASE	0x49024000
-#define OMAP44XX_MCBSP3_BASE	0x49026000
-#define OMAP44XX_MCBSP4_BASE	0x48074000
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
-
-#define OMAP_MCBSP_REG_DRR2	0x00
-#define OMAP_MCBSP_REG_DRR1	0x02
-#define OMAP_MCBSP_REG_DXR2	0x04
-#define OMAP_MCBSP_REG_DXR1	0x06
-#define OMAP_MCBSP_REG_SPCR2	0x08
-#define OMAP_MCBSP_REG_SPCR1	0x0a
-#define OMAP_MCBSP_REG_RCR2	0x0c
-#define OMAP_MCBSP_REG_RCR1	0x0e
-#define OMAP_MCBSP_REG_XCR2	0x10
-#define OMAP_MCBSP_REG_XCR1	0x12
-#define OMAP_MCBSP_REG_SRGR2	0x14
-#define OMAP_MCBSP_REG_SRGR1	0x16
-#define OMAP_MCBSP_REG_MCR2	0x18
-#define OMAP_MCBSP_REG_MCR1	0x1a
-#define OMAP_MCBSP_REG_RCERA	0x1c
-#define OMAP_MCBSP_REG_RCERB	0x1e
-#define OMAP_MCBSP_REG_XCERA	0x20
-#define OMAP_MCBSP_REG_XCERB	0x22
-#define OMAP_MCBSP_REG_PCR0	0x24
-#define OMAP_MCBSP_REG_RCERC	0x26
-#define OMAP_MCBSP_REG_RCERD	0x28
-#define OMAP_MCBSP_REG_XCERC	0x2A
-#define OMAP_MCBSP_REG_XCERD	0x2C
-#define OMAP_MCBSP_REG_RCERE	0x2E
-#define OMAP_MCBSP_REG_RCERF	0x30
-#define OMAP_MCBSP_REG_XCERE	0x32
-#define OMAP_MCBSP_REG_XCERF	0x34
-#define OMAP_MCBSP_REG_RCERG	0x36
-#define OMAP_MCBSP_REG_RCERH	0x38
-#define OMAP_MCBSP_REG_XCERG	0x3A
-#define OMAP_MCBSP_REG_XCERH	0x3C
-
-/* Dummy defines, these are not available on omap1 */
-#define OMAP_MCBSP_REG_XCCR	0x00
-#define OMAP_MCBSP_REG_RCCR	0x00
-
-#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP1
-#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
-#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
-
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-	defined(CONFIG_ARCH_OMAP4)
-
-#define OMAP_MCBSP_REG_DRR2	0x00
-#define OMAP_MCBSP_REG_DRR1	0x04
-#define OMAP_MCBSP_REG_DXR2	0x08
-#define OMAP_MCBSP_REG_DXR1	0x0C
-#define OMAP_MCBSP_REG_DRR	0x00
-#define OMAP_MCBSP_REG_DXR	0x08
-#define OMAP_MCBSP_REG_SPCR2	0x10
-#define OMAP_MCBSP_REG_SPCR1	0x14
-#define OMAP_MCBSP_REG_RCR2	0x18
-#define OMAP_MCBSP_REG_RCR1	0x1C
-#define OMAP_MCBSP_REG_XCR2	0x20
-#define OMAP_MCBSP_REG_XCR1	0x24
-#define OMAP_MCBSP_REG_SRGR2	0x28
-#define OMAP_MCBSP_REG_SRGR1	0x2C
-#define OMAP_MCBSP_REG_MCR2	0x30
-#define OMAP_MCBSP_REG_MCR1	0x34
-#define OMAP_MCBSP_REG_RCERA	0x38
-#define OMAP_MCBSP_REG_RCERB	0x3C
-#define OMAP_MCBSP_REG_XCERA	0x40
-#define OMAP_MCBSP_REG_XCERB	0x44
-#define OMAP_MCBSP_REG_PCR0	0x48
-#define OMAP_MCBSP_REG_RCERC	0x4C
-#define OMAP_MCBSP_REG_RCERD	0x50
-#define OMAP_MCBSP_REG_XCERC	0x54
-#define OMAP_MCBSP_REG_XCERD	0x58
-#define OMAP_MCBSP_REG_RCERE	0x5C
-#define OMAP_MCBSP_REG_RCERF	0x60
-#define OMAP_MCBSP_REG_XCERE	0x64
-#define OMAP_MCBSP_REG_XCERF	0x68
-#define OMAP_MCBSP_REG_RCERG	0x6C
-#define OMAP_MCBSP_REG_RCERH	0x70
-#define OMAP_MCBSP_REG_XCERG	0x74
-#define OMAP_MCBSP_REG_XCERH	0x78
-#define OMAP_MCBSP_REG_SYSCON	0x8C
-#define OMAP_MCBSP_REG_THRSH2	0x90
-#define OMAP_MCBSP_REG_THRSH1	0x94
-#define OMAP_MCBSP_REG_IRQST	0xA0
-#define OMAP_MCBSP_REG_IRQEN	0xA4
-#define OMAP_MCBSP_REG_WAKEUPEN	0xA8
-#define OMAP_MCBSP_REG_XCCR	0xAC
-#define OMAP_MCBSP_REG_RCCR	0xB0
-
-#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
-#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
-
-#define AUDIO_MCBSP		OMAP_MCBSP2
-#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
-#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
-
-#endif
-
-/************************** McBSP SPCR1 bit definitions ***********************/
-#define RRST			0x0001
-#define RRDY			0x0002
-#define RFULL			0x0004
-#define RSYNC_ERR		0x0008
-#define RINTM(value)		((value)<<4)	/* bits 4:5 */
-#define ABIS			0x0040
-#define DXENA			0x0080
-#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
-#define RJUST(value)		((value)<<13)	/* bits 13:14 */
-#define ALB			0x8000
-#define DLB			0x8000
-
-/************************** McBSP SPCR2 bit definitions ***********************/
-#define XRST		0x0001
-#define XRDY		0x0002
-#define XEMPTY		0x0004
-#define XSYNC_ERR	0x0008
-#define XINTM(value)	((value)<<4)		/* bits 4:5 */
-#define GRST		0x0040
-#define FRST		0x0080
-#define SOFT		0x0100
-#define FREE		0x0200
-
-/************************** McBSP PCR bit definitions *************************/
-#define CLKRP		0x0001
-#define CLKXP		0x0002
-#define FSRP		0x0004
-#define FSXP		0x0008
-#define DR_STAT		0x0010
-#define DX_STAT		0x0020
-#define CLKS_STAT	0x0040
-#define SCLKME		0x0080
-#define CLKRM		0x0100
-#define CLKXM		0x0200
-#define FSRM		0x0400
-#define FSXM		0x0800
-#define RIOEN		0x1000
-#define XIOEN		0x2000
-#define IDLE_EN		0x4000
-
-/************************** McBSP RCR1 bit definitions ************************/
-#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
-#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
-
-/************************** McBSP XCR1 bit definitions ************************/
-#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
-#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
-
-/*************************** McBSP RCR2 bit definitions ***********************/
-#define RDATDLY(value)		(value)		/* Bits 0:1 */
-#define RFIG			0x0004
-#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
-#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
-#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
-#define RPHASE			0x8000
-
-/*************************** McBSP XCR2 bit definitions ***********************/
-#define XDATDLY(value)		(value)		/* Bits 0:1 */
-#define XFIG			0x0004
-#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
-#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
-#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
-#define XPHASE			0x8000
-
-/************************* McBSP SRGR1 bit definitions ************************/
-#define CLKGDV(value)		(value)		/* Bits 0:7 */
-#define FWID(value)		((value)<<8)	/* Bits 8:15 */
-
-/************************* McBSP SRGR2 bit definitions ************************/
-#define FPER(value)		(value)		/* Bits 0:11 */
-#define FSGM			0x1000
-#define CLKSM			0x2000
-#define CLKSP			0x4000
-#define GSYNC			0x8000
-
-/************************* McBSP MCR1 bit definitions *************************/
-#define RMCM			0x0001
-#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
-#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
-#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
-
-/************************* McBSP MCR2 bit definitions *************************/
-#define XMCM(value)		(value)		/* Bits 0:1 */
-#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
-#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
-#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
-
-/*********************** McBSP XCCR bit definitions *************************/
-#define EXTCLKGATE		0x8000
-#define PPCONNECT		0x4000
-#define DXENDLY(value)		((value)<<12)	/* Bits 12:13 */
-#define XFULL_CYCLE		0x0800
-#define DILB			0x0020
-#define XDMAEN			0x0008
-#define XDISABLE		0x0001
-
-/********************** McBSP RCCR bit definitions *************************/
-#define RFULL_CYCLE		0x0800
-#define RDMAEN			0x0008
-#define RDISABLE		0x0001
-
-/********************** McBSP SYSCONFIG bit definitions ********************/
-#define CLOCKACTIVITY(value)	((value)<<8)
-#define SIDLEMODE(value)	((value)<<3)
-#define ENAWAKEUP		0x0004
-#define SOFTRST			0x0002
-
-/********************** McBSP DMA operating modes **************************/
-#define MCBSP_DMA_MODE_ELEMENT		0
-#define MCBSP_DMA_MODE_THRESHOLD	1
-#define MCBSP_DMA_MODE_FRAME		2
-
-/********************** McBSP WAKEUPEN bit definitions *********************/
-#define XEMPTYEOFEN		0x4000
-#define XRDYEN			0x0400
-#define XEOFEN			0x0200
-#define XFSXEN			0x0100
-#define XSYNCERREN		0x0080
-#define RRDYEN			0x0008
-#define REOFEN			0x0004
-#define RFSREN			0x0002
-#define RSYNCERREN		0x0001
-
-/* we don't do multichannel for now */
-struct omap_mcbsp_reg_cfg {
-	u16 spcr2;
-	u16 spcr1;
-	u16 rcr2;
-	u16 rcr1;
-	u16 xcr2;
-	u16 xcr1;
-	u16 srgr2;
-	u16 srgr1;
-	u16 mcr2;
-	u16 mcr1;
-	u16 pcr0;
-	u16 rcerc;
-	u16 rcerd;
-	u16 xcerc;
-	u16 xcerd;
-	u16 rcere;
-	u16 rcerf;
-	u16 xcere;
-	u16 xcerf;
-	u16 rcerg;
-	u16 rcerh;
-	u16 xcerg;
-	u16 xcerh;
-	u16 xccr;
-	u16 rccr;
-};
-
-typedef enum {
-	OMAP_MCBSP1 = 0,
-	OMAP_MCBSP2,
-	OMAP_MCBSP3,
-	OMAP_MCBSP4,
-	OMAP_MCBSP5
-} omap_mcbsp_id;
-
-typedef int __bitwise omap_mcbsp_io_type_t;
-#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
-#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
-
-typedef enum {
-	OMAP_MCBSP_WORD_8 = 0,
-	OMAP_MCBSP_WORD_12,
-	OMAP_MCBSP_WORD_16,
-	OMAP_MCBSP_WORD_20,
-	OMAP_MCBSP_WORD_24,
-	OMAP_MCBSP_WORD_32,
-} omap_mcbsp_word_length;
-
-typedef enum {
-	OMAP_MCBSP_CLK_RISING = 0,
-	OMAP_MCBSP_CLK_FALLING,
-} omap_mcbsp_clk_polarity;
-
-typedef enum {
-	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
-	OMAP_MCBSP_FS_ACTIVE_LOW,
-} omap_mcbsp_fs_polarity;
-
-typedef enum {
-	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
-	OMAP_MCBSP_CLK_STP_MODE_DELAY,
-} omap_mcbsp_clk_stp_mode;
-
-
-/******* SPI specific mode **********/
-typedef enum {
-	OMAP_MCBSP_SPI_MASTER = 0,
-	OMAP_MCBSP_SPI_SLAVE,
-} omap_mcbsp_spi_mode;
-
-struct omap_mcbsp_spi_cfg {
-	omap_mcbsp_spi_mode		spi_mode;
-	omap_mcbsp_clk_polarity		rx_clock_polarity;
-	omap_mcbsp_clk_polarity		tx_clock_polarity;
-	omap_mcbsp_fs_polarity		fsx_polarity;
-	u8				clk_div;
-	omap_mcbsp_clk_stp_mode		clk_stp_mode;
-	omap_mcbsp_word_length		word_length;
-};
-
-/* Platform specific configuration */
-struct omap_mcbsp_ops {
-	void (*request)(unsigned int);
-	void (*free)(unsigned int);
-};
-
-struct omap_mcbsp_platform_data {
-	unsigned long phys_base;
-	u8 dma_rx_sync, dma_tx_sync;
-	u16 rx_irq, tx_irq;
-	struct omap_mcbsp_ops *ops;
-#ifdef CONFIG_ARCH_OMAP34XX
-	u16 buffer_size;
-#endif
-};
-
-struct omap_mcbsp {
-	struct device *dev;
-	unsigned long phys_base;
-	void __iomem *io_base;
-	u8 id;
-	u8 free;
-	omap_mcbsp_word_length rx_word_length;
-	omap_mcbsp_word_length tx_word_length;
-
-	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
-	/* IRQ based TX/RX */
-	int rx_irq;
-	int tx_irq;
-
-	/* DMA stuff */
-	u8 dma_rx_sync;
-	short dma_rx_lch;
-	u8 dma_tx_sync;
-	short dma_tx_lch;
-
-	/* Completion queues */
-	struct completion tx_irq_completion;
-	struct completion rx_irq_completion;
-	struct completion tx_dma_completion;
-	struct completion rx_dma_completion;
-
-	/* Protect the field .free, while checking if the mcbsp is in use */
-	spinlock_t lock;
-	struct omap_mcbsp_platform_data *pdata;
-	struct clk *iclk;
-	struct clk *fclk;
-#ifdef CONFIG_ARCH_OMAP34XX
-	int dma_op_mode;
-	u16 max_tx_thres;
-	u16 max_rx_thres;
-#endif
-};
-extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count;
-
-int omap_mcbsp_init(void);
-void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
-					int size);
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-#ifdef CONFIG_ARCH_OMAP34XX
-void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
-void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
-u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
-u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
-int omap_mcbsp_get_dma_op_mode(unsigned int id);
-#else
-static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{ }
-static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
-static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
-static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
-#endif
-int omap_mcbsp_request(unsigned int id);
-void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id, int tx, int rx);
-void omap_mcbsp_stop(unsigned int id, int tx, int rx);
-void omap_mcbsp_xmit_word(unsigned int id, u32 word);
-u32 omap_mcbsp_recv_word(unsigned int id);
-
-int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
-int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
-int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
-
-
-/* SPI specific API */
-void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
-
-/* Polled read/write functions */
-int omap_mcbsp_pollread(unsigned int id, u16 * buf);
-int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
-int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
deleted file mode 100644
index 9ad41dc..0000000
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET		UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
-#define PHYS_OFFSET		UL(0x80000000)
-#endif
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
-#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_page_to_dma(dev, page)	\
-	({ dma_addr_t __dma = page_to_phys(page); \
-	   if (is_lbus_device(dev)) \
-		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
-	   __dma; })
-
-#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
-						lbus_to_virt(addr) : \
-						__phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
-					   (dma_addr_t) (is_lbus_device(dev) ? \
-						virt_to_lbus(__addr) : \
-						__virt_to_phys(__addr)); })
-
-#endif	/* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
-	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
deleted file mode 100644
index 7229b95..0000000
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * MMC definitions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __OMAP2_MMC_H
-#define __OMAP2_MMC_H
-
-#include <linux/types.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-
-#include <mach/board.h>
-
-#define OMAP15XX_NR_MMC		1
-#define OMAP16XX_NR_MMC		2
-#define OMAP1_MMC_SIZE		0x080
-#define OMAP1_MMC1_BASE		0xfffb7800
-#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
-
-#define OMAP24XX_NR_MMC		2
-#define OMAP34XX_NR_MMC		3
-#define OMAP44XX_NR_MMC		5
-#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
-#define OMAP3_HSMMC_SIZE	0x200
-#define OMAP4_HSMMC_SIZE	0x1000
-#define OMAP2_MMC1_BASE		0x4809c000
-#define OMAP2_MMC2_BASE		0x480b4000
-#define OMAP3_MMC3_BASE		0x480ad000
-#define OMAP4_MMC4_BASE		0x480d1000
-#define OMAP4_MMC5_BASE		0x480d5000
-#define OMAP4_MMC_REG_OFFSET	0x100
-#define HSMMC5			(1 << 4)
-#define HSMMC4			(1 << 3)
-#define HSMMC3			(1 << 2)
-#define HSMMC2			(1 << 1)
-#define HSMMC1			(1 << 0)
-
-#define OMAP_MMC_MAX_SLOTS	2
-
-struct omap_mmc_platform_data {
-	/* back-link to device */
-	struct device *dev;
-
-	/* number of slots per controller */
-	unsigned nr_slots:2;
-
-	/* set if your board has components or wiring that limits the
-	 * maximum frequency on the MMC bus */
-	unsigned int max_freq;
-
-	/* switch the bus to a new slot */
-	int (* switch_slot)(struct device *dev, int slot);
-	/* initialize board-specific MMC functionality, can be NULL if
-	 * not supported */
-	int (* init)(struct device *dev);
-	void (* cleanup)(struct device *dev);
-	void (* shutdown)(struct device *dev);
-
-	/* To handle board related suspend/resume functionality for MMC */
-	int (*suspend)(struct device *dev, int slot);
-	int (*resume)(struct device *dev, int slot);
-
-	/* Return context loss count due to PM states changing */
-	int (*get_context_loss_count)(struct device *dev);
-
-	u64 dma_mask;
-
-	struct omap_mmc_slot_data {
-
-		/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
-		 * 8 wire signaling is also optional, and is used with HSMMC
-		 */
-		u8 wires;
-
-		/*
-		 * nomux means "standard" muxing is wrong on this board, and
-		 * that board-specific code handled it before common init logic.
-		 */
-		unsigned nomux:1;
-
-		/* switch pin can be for card detect (default) or card cover */
-		unsigned cover:1;
-
-		/* use the internal clock */
-		unsigned internal_clock:1;
-
-		/* nonremovable e.g. eMMC */
-		unsigned nonremovable:1;
-
-		/* Try to sleep or power off when possible */
-		unsigned power_saving:1;
-
-		int switch_pin;			/* gpio (card detect) */
-		int gpio_wp;			/* gpio (write protect) */
-
-		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
-		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
-		int (* get_ro)(struct device *dev, int slot);
-		int (*set_sleep)(struct device *dev, int slot, int sleep,
-				 int vdd, int cardsleep);
-
-		/* return MMC cover switch state, can be NULL if not supported.
-		 *
-		 * possible return values:
-		 *   0 - closed
-		 *   1 - open
-		 */
-		int (* get_cover_state)(struct device *dev, int slot);
-
-		const char *name;
-		u32 ocr_mask;
-
-		/* Card detection IRQs */
-		int card_detect_irq;
-		int (* card_detect)(int irq);
-
-		unsigned int ban_openended:1;
-
-	} slots[OMAP_MMC_MAX_SLOTS];
-};
-
-/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
-
-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
-	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers);
-void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers);
-int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data);
-#else
-static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers)
-{
-}
-static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
-				int nr_controllers)
-{
-}
-static inline int omap_mmc_add(const char *name, int id, unsigned long base,
-				unsigned long size, unsigned int irq,
-				struct omap_mmc_platform_data *data)
-{
-	return 0;
-}
-
-#endif
-#endif
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
deleted file mode 100644
index 0f49d2d..0000000
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ /dev/null
@@ -1,914 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/mux.h
- *
- * Table of the Omap register configurations for the FUNC_MUX and
- * PULL_DWN combinations.
- *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * NOTE: Please use the following naming style for new pin entries.
- *	 For example, W8_1610_MMC2_DAT0, where:
- *	 - W8	     = ball
- *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
- *	 - MMC2_DAT0 = function
- */
-
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
-#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
-					.mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
-					.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
-					.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
-					.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
-					.pull_reg = OMAP850_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#else
-
-#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
-					.pu_pd_val = status,
-
-#define MUX_REG_730(reg, mode_offset, mode) \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#endif /* CONFIG_OMAP_MUX_DEBUG */
-
-#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
-		pull_reg, pull_bit, pull_status,	\
-		pu_pd_reg, pu_pd_status, debug_status)	\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG(mux_reg, mode_offset, mode)		\
-	PULL_REG(pull_reg, pull_bit, pull_status)	\
-	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
-},
-
-
-/*
- * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
- *   not the FUNC_MUX_CTRL_x regs from hardware.h
- * - for pull-up/down, only has one enable bit which is is in the same register
- *   as mux config
- */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_730(mux_reg, mode_offset, mode)		\
-	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_850(mux_reg, mode_offset, mode)		\
-	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-
-#define MUX_CFG_24XX(desc, reg_offset, mode,			\
-				pull_en, pull_mode, dbg)	\
-{								\
-	.name		= desc,					\
-	.debug		= dbg,					\
-	.mux_reg	= reg_offset,				\
-	.mask		= mode,					\
-	.pull_val	= pull_en,				\
-	.pu_pd_val	= pull_mode,				\
-},
-
-/* 24xx/34xx mux bit defines */
-#define OMAP2_PULL_ENA		(1 << 3)
-#define OMAP2_PULL_UP		(1 << 4)
-#define OMAP2_ALTELECTRICALSEL	(1 << 5)
-
-/* 34xx specific mux bit defines */
-#define OMAP3_INPUT_EN		(1 << 8)
-#define OMAP3_OFF_EN		(1 << 9)
-#define OMAP3_OFFOUT_EN		(1 << 10)
-#define OMAP3_OFFOUT_VAL	(1 << 11)
-#define OMAP3_OFF_PULL_EN	(1 << 12)
-#define OMAP3_OFF_PULL_UP	(1 << 13)
-#define OMAP3_WAKEUP_EN		(1 << 14)
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define	OMAP34XX_MUX_MODE0	0
-#define	OMAP34XX_MUX_MODE1	1
-#define	OMAP34XX_MUX_MODE2	2
-#define	OMAP34XX_MUX_MODE3	3
-#define	OMAP34XX_MUX_MODE4	4
-#define	OMAP34XX_MUX_MODE5	5
-#define	OMAP34XX_MUX_MODE6	6
-#define	OMAP34XX_MUX_MODE7	7
-
-/* 34xx active pin states */
-#define OMAP34XX_PIN_OUTPUT		0
-#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
-#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
-						| OMAP2_PULL_UP)
-#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
-
-/* 34xx off mode states */
-#define OMAP34XX_PIN_OFF_NONE           0
-#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
-						| OMAP3_OFFOUT_VAL)
-#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
-#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
-						| OMAP3_OFF_PULL_UP)
-#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
-#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
-
-#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
-	.name		= desc,					\
-	.debug		= 0,					\
-	.mux_reg	= reg_offset,				\
-	.mux_val	= mux_value				\
-},
-
-struct pin_config {
-	char 			*name;
-	const unsigned int 	mux_reg;
-	unsigned char		debug;
-
-#if	defined(CONFIG_ARCH_OMAP34XX)
-	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
-#endif
-
-#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
-	const unsigned char mask_offset;
-	const unsigned char mask;
-
-	const char *pull_name;
-	const unsigned int pull_reg;
-	const unsigned char pull_val;
-	const unsigned char pull_bit;
-
-	const char *pu_pd_name;
-	const unsigned int pu_pd_reg;
-	const unsigned char pu_pd_val;
-#endif
-
-#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-	const char *mux_reg_name;
-#endif
-
-};
-
-enum omap730_index {
-	/* OMAP 730 keyboard */
-	E2_730_KBR0,
-	J7_730_KBR1,
-	E1_730_KBR2,
-	F3_730_KBR3,
-	D2_730_KBR4,
-	C2_730_KBC0,
-	D3_730_KBC1,
-	E4_730_KBC2,
-	F4_730_KBC3,
-	E3_730_KBC4,
-
-	/* USB */
-	AA17_730_USB_DM,
-	W16_730_USB_PU_EN,
-	W17_730_USB_VBUSI,
-};
-
-enum omap850_index {
-	/* OMAP 850 keyboard */
-	E2_850_KBR0,
-	J7_850_KBR1,
-	E1_850_KBR2,
-	F3_850_KBR3,
-	D2_850_KBR4,
-	C2_850_KBC0,
-	D3_850_KBC1,
-	E4_850_KBC2,
-	F4_850_KBC3,
-	E3_850_KBC4,
-
-	/* USB */
-	AA17_850_USB_DM,
-	W16_850_USB_PU_EN,
-	W17_850_USB_VBUSI,
-};
-
-
-enum omap1xxx_index {
-	/* UART1 (BT_UART_GATING)*/
-	UART1_TX = 0,
-	UART1_RTS,
-
-	/* UART2 (COM_UART_GATING)*/
-	UART2_TX,
-	UART2_RX,
-	UART2_CTS,
-	UART2_RTS,
-
-	/* UART3 (GIGA_UART_GATING) */
-	UART3_TX,
-	UART3_RX,
-	UART3_CTS,
-	UART3_RTS,
-	UART3_CLKREQ,
-	UART3_BCLK,	/* 12MHz clock out */
-	Y15_1610_UART3_RTS,
-
-	/* PWT & PWL */
-	PWT,
-	PWL,
-
-	/* USB master generic */
-	R18_USB_VBUS,
-	R18_1510_USB_GPIO0,
-	W4_USB_PUEN,
-	W4_USB_CLKO,
-	W4_USB_HIGHZ,
-	W4_GPIO58,
-
-	/* USB1 master */
-	USB1_SUSP,
-	USB1_SEO,
-	W13_1610_USB1_SE0,
-	USB1_TXEN,
-	USB1_TXD,
-	USB1_VP,
-	USB1_VM,
-	USB1_RCV,
-	USB1_SPEED,
-	R13_1610_USB1_SPEED,
-	R13_1710_USB1_SE0,
-
-	/* USB2 master */
-	USB2_SUSP,
-	USB2_VP,
-	USB2_TXEN,
-	USB2_VM,
-	USB2_RCV,
-	USB2_SEO,
-	USB2_TXD,
-
-	/* OMAP-1510 GPIO */
-	R18_1510_GPIO0,
-	R19_1510_GPIO1,
-	M14_1510_GPIO2,
-
-	/* OMAP1610 GPIO */
-	P18_1610_GPIO3,
-	Y15_1610_GPIO17,
-
-	/* OMAP-1710 GPIO */
-	R18_1710_GPIO0,
-	V2_1710_GPIO10,
-	N21_1710_GPIO14,
-	W15_1710_GPIO40,
-
-	/* MPUIO */
-	MPUIO2,
-	N15_1610_MPUIO2,
-	MPUIO4,
-	MPUIO5,
-	T20_1610_MPUIO5,
-	W11_1610_MPUIO6,
-	V10_1610_MPUIO7,
-	W11_1610_MPUIO9,
-	V10_1610_MPUIO10,
-	W10_1610_MPUIO11,
-	E20_1610_MPUIO13,
-	U20_1610_MPUIO14,
-	E19_1610_MPUIO15,
-
-	/* MCBSP2 */
-	MCBSP2_CLKR,
-	MCBSP2_CLKX,
-	MCBSP2_DR,
-	MCBSP2_DX,
-	MCBSP2_FSR,
-	MCBSP2_FSX,
-
-	/* MCBSP3 */
-	MCBSP3_CLKX,
-
-	/* Misc ballouts */
-	BALLOUT_V8_ARMIO3,
-	N20_HDQ,
-
-	/* OMAP-1610 MMC2 */
-	W8_1610_MMC2_DAT0,
-	V8_1610_MMC2_DAT1,
-	W15_1610_MMC2_DAT2,
-	R10_1610_MMC2_DAT3,
-	Y10_1610_MMC2_CLK,
-	Y8_1610_MMC2_CMD,
-	V9_1610_MMC2_CMDDIR,
-	V5_1610_MMC2_DATDIR0,
-	W19_1610_MMC2_DATDIR1,
-	R18_1610_MMC2_CLKIN,
-
-	/* OMAP-1610 External Trace Interface */
-	M19_1610_ETM_PSTAT0,
-	L15_1610_ETM_PSTAT1,
-	L18_1610_ETM_PSTAT2,
-	L19_1610_ETM_D0,
-	J19_1610_ETM_D6,
-	J18_1610_ETM_D7,
-
-	/* OMAP16XX GPIO */
-	P20_1610_GPIO4,
-	V9_1610_GPIO7,
-	W8_1610_GPIO9,
-	N20_1610_GPIO11,
-	N19_1610_GPIO13,
-	P10_1610_GPIO22,
-	V5_1610_GPIO24,
-	AA20_1610_GPIO_41,
-	W19_1610_GPIO48,
-	M7_1610_GPIO62,
-	V14_16XX_GPIO37,
-	R9_16XX_GPIO18,
-	L14_16XX_GPIO49,
-
-	/* OMAP-1610 uWire */
-	V19_1610_UWIRE_SCLK,
-	U18_1610_UWIRE_SDI,
-	W21_1610_UWIRE_SDO,
-	N14_1610_UWIRE_CS0,
-	P15_1610_UWIRE_CS3,
-	N15_1610_UWIRE_CS1,
-
-	/* OMAP-1610 SPI */
-	U19_1610_SPIF_SCK,
-	U18_1610_SPIF_DIN,
-	P20_1610_SPIF_DIN,
-	W21_1610_SPIF_DOUT,
-	R18_1610_SPIF_DOUT,
-	N14_1610_SPIF_CS0,
-	N15_1610_SPIF_CS1,
-	T19_1610_SPIF_CS2,
-	P15_1610_SPIF_CS3,
-
-	/* OMAP-1610 Flash */
-	L3_1610_FLASH_CS2B_OE,
-	M8_1610_FLASH_CS2B_WE,
-
-	/* First MMC */
-	MMC_CMD,
-	MMC_DAT1,
-	MMC_DAT2,
-	MMC_DAT0,
-	MMC_CLK,
-	MMC_DAT3,
-
-	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
-	M15_1710_MMC_CLKI,
-	P19_1710_MMC_CMDDIR,
-	P20_1710_MMC_DATDIR0,
-
-	/* OMAP-1610 USB0 alternate pin configuration */
-	W9_USB0_TXEN,
-	AA9_USB0_VP,
-	Y5_USB0_RCV,
-	R9_USB0_VM,
-	V6_USB0_TXD,
-	W5_USB0_SE0,
-	V9_USB0_SPEED,
-	V9_USB0_SUSP,
-
-	/* USB2 */
-	W9_USB2_TXEN,
-	AA9_USB2_VP,
-	Y5_USB2_RCV,
-	R9_USB2_VM,
-	V6_USB2_TXD,
-	W5_USB2_SE0,
-
-	/* 16XX UART */
-	R13_1610_UART1_TX,
-	V14_16XX_UART1_RX,
-	R14_1610_UART1_CTS,
-	AA15_1610_UART1_RTS,
-	R9_16XX_UART2_RX,
-	L14_16XX_UART3_RX,
-
-	/* I2C OMAP-1610 */
-	I2C_SCL,
-	I2C_SDA,
-
-	/* Keypad */
-	F18_1610_KBC0,
-	D20_1610_KBC1,
-	D19_1610_KBC2,
-	E18_1610_KBC3,
-	C21_1610_KBC4,
-	G18_1610_KBR0,
-	F19_1610_KBR1,
-	H14_1610_KBR2,
-	E20_1610_KBR3,
-	E19_1610_KBR4,
-	N19_1610_KBR5,
-
-	/* Power management */
-	T20_1610_LOW_PWR,
-
-	/* MCLK Settings */
-	V5_1710_MCLK_ON,
-	V5_1710_MCLK_OFF,
-	R10_1610_MCLK_ON,
-	R10_1610_MCLK_OFF,
-
-	/* CompactFlash controller */
-	P11_1610_CF_CD2,
-	R11_1610_CF_IOIS16,
-	V10_1610_CF_IREQ,
-	W10_1610_CF_RESET,
-	W11_1610_CF_CD1,
-
-	/* parallel camera */
-	J15_1610_CAM_LCLK,
-	J18_1610_CAM_D7,
-	J19_1610_CAM_D6,
-	J14_1610_CAM_D5,
-	K18_1610_CAM_D4,
-	K19_1610_CAM_D3,
-	K15_1610_CAM_D2,
-	K14_1610_CAM_D1,
-	L19_1610_CAM_D0,
-	L18_1610_CAM_VS,
-	L15_1610_CAM_HS,
-	M19_1610_CAM_RSTZ,
-	Y15_1610_CAM_OUTCLK,
-
-	/* serial camera */
-	H19_1610_CAM_EXCLK,
-	Y12_1610_CCP_CLKP,
-	W13_1610_CCP_CLKM,
-	W14_1610_CCP_DATAP,
-	Y14_1610_CCP_DATAM,
-
-};
-
-enum omap24xx_index {
-	/* 24xx I2C */
-	M19_24XX_I2C1_SCL,
-	L15_24XX_I2C1_SDA,
-	J15_24XX_I2C2_SCL,
-	H19_24XX_I2C2_SDA,
-
-	/* 24xx Menelaus interrupt */
-	W19_24XX_SYS_NIRQ,
-
-	/* 24xx clock */
-	W14_24XX_SYS_CLKOUT,
-
-	/* 24xx GPMC chipselects, wait pin monitoring */
-	E2_GPMC_NCS2,
-	L2_GPMC_NCS7,
-	L3_GPMC_WAIT0,
-	N7_GPMC_WAIT1,
-	M1_GPMC_WAIT2,
-	P1_GPMC_WAIT3,
-
-	/* 242X McBSP */
-	Y15_24XX_MCBSP2_CLKX,
-	R14_24XX_MCBSP2_FSX,
-	W15_24XX_MCBSP2_DR,
-	V15_24XX_MCBSP2_DX,
-
-	/* 24xx GPIO */
-	M21_242X_GPIO11,
-	P21_242X_GPIO12,
-	AA10_242X_GPIO13,
-	AA6_242X_GPIO14,
-	AA4_242X_GPIO15,
-	Y11_242X_GPIO16,
-	AA12_242X_GPIO17,
-	AA8_242X_GPIO58,
-	Y20_24XX_GPIO60,
-	W4__24XX_GPIO74,
-	N15_24XX_GPIO85,
-	M15_24XX_GPIO92,
-	P20_24XX_GPIO93,
-	P18_24XX_GPIO95,
-	M18_24XX_GPIO96,
-	L14_24XX_GPIO97,
-	J15_24XX_GPIO99,
-	V14_24XX_GPIO117,
-	P14_24XX_GPIO125,
-
-	/* 242x DBG GPIO */
-	V4_242X_GPIO49,
-	W2_242X_GPIO50,
-	U4_242X_GPIO51,
-	V3_242X_GPIO52,
-	V2_242X_GPIO53,
-	V6_242X_GPIO53,
-	T4_242X_GPIO54,
-	Y4_242X_GPIO54,
-	T3_242X_GPIO55,
-	U2_242X_GPIO56,
-
-	/* 24xx external DMA requests */
-	AA10_242X_DMAREQ0,
-	AA6_242X_DMAREQ1,
-	E4_242X_DMAREQ2,
-	G4_242X_DMAREQ3,
-	D3_242X_DMAREQ4,
-	E3_242X_DMAREQ5,
-
-	/* UART3 */
-	K15_24XX_UART3_TX,
-	K14_24XX_UART3_RX,
-
-	/* MMC/SDIO */
-	G19_24XX_MMC_CLKO,
-	H18_24XX_MMC_CMD,
-	F20_24XX_MMC_DAT0,
-	H14_24XX_MMC_DAT1,
-	E19_24XX_MMC_DAT2,
-	D19_24XX_MMC_DAT3,
-	F19_24XX_MMC_DAT_DIR0,
-	E20_24XX_MMC_DAT_DIR1,
-	F18_24XX_MMC_DAT_DIR2,
-	E18_24XX_MMC_DAT_DIR3,
-	G18_24XX_MMC_CMD_DIR,
-	H15_24XX_MMC_CLKI,
-
-	/* Full speed USB */
-	J20_24XX_USB0_PUEN,
-	J19_24XX_USB0_VP,
-	K20_24XX_USB0_VM,
-	J18_24XX_USB0_RCV,
-	K19_24XX_USB0_TXEN,
-	J14_24XX_USB0_SE0,
-	K18_24XX_USB0_DAT,
-
-	N14_24XX_USB1_SE0,
-	W12_24XX_USB1_SE0,
-	P15_24XX_USB1_DAT,
-	R13_24XX_USB1_DAT,
-	W20_24XX_USB1_TXEN,
-	P13_24XX_USB1_TXEN,
-	V19_24XX_USB1_RCV,
-	V12_24XX_USB1_RCV,
-
-	AA10_24XX_USB2_SE0,
-	Y11_24XX_USB2_DAT,
-	AA12_24XX_USB2_TXEN,
-	AA6_24XX_USB2_RCV,
-	AA4_24XX_USB2_TLLSE0,
-
-	/* Keypad GPIO*/
-	T19_24XX_KBR0,
-	R19_24XX_KBR1,
-	V18_24XX_KBR2,
-	M21_24XX_KBR3,
-	E5__24XX_KBR4,
-	M18_24XX_KBR5,
-	R20_24XX_KBC0,
-	M14_24XX_KBC1,
-	H19_24XX_KBC2,
-	V17_24XX_KBC3,
-	P21_24XX_KBC4,
-	L14_24XX_KBC5,
-	N19_24XX_KBC6,
-
-	/* 24xx Menelaus Keypad GPIO */
-	B3__24XX_KBR5,
-	AA4_24XX_KBC2,
-	B13_24XX_KBC6,
-
-	/* 2430 USB */
-	AD9_2430_USB0_PUEN,
-	Y11_2430_USB0_VP,
-	AD7_2430_USB0_VM,
-	AE7_2430_USB0_RCV,
-	AD4_2430_USB0_TXEN,
-	AF9_2430_USB0_SE0,
-	AE6_2430_USB0_DAT,
-	AD24_2430_USB1_SE0,
-	AB24_2430_USB1_RCV,
-	Y25_2430_USB1_TXEN,
-	AA26_2430_USB1_DAT,
-
-	/* 2430 HS-USB */
-	AD9_2430_USB0HS_DATA3,
-	Y11_2430_USB0HS_DATA4,
-	AD7_2430_USB0HS_DATA5,
-	AE7_2430_USB0HS_DATA6,
-	AD4_2430_USB0HS_DATA2,
-	AF9_2430_USB0HS_DATA0,
-	AE6_2430_USB0HS_DATA1,
-	AE8_2430_USB0HS_CLK,
-	AD8_2430_USB0HS_DIR,
-	AE5_2430_USB0HS_STP,
-	AE9_2430_USB0HS_NXT,
-	AC7_2430_USB0HS_DATA7,
-
-	/* 2430 McBSP */
-	AD6_2430_MCBSP_CLKS,
-
-	AB2_2430_MCBSP1_CLKR,
-	AD5_2430_MCBSP1_FSR,
-	AA1_2430_MCBSP1_DX,
-	AF3_2430_MCBSP1_DR,
-	AB3_2430_MCBSP1_FSX,
-	Y9_2430_MCBSP1_CLKX,
-
-	AC10_2430_MCBSP2_FSX,
-	AD16_2430_MCBSP2_CLX,
-	AE13_2430_MCBSP2_DX,
-	AD13_2430_MCBSP2_DR,
-	AC10_2430_MCBSP2_FSX_OFF,
-	AD16_2430_MCBSP2_CLX_OFF,
-	AE13_2430_MCBSP2_DX_OFF,
-	AD13_2430_MCBSP2_DR_OFF,
-
-	AC9_2430_MCBSP3_CLKX,
-	AE4_2430_MCBSP3_FSX,
-	AE2_2430_MCBSP3_DR,
-	AF4_2430_MCBSP3_DX,
-
-	N3_2430_MCBSP4_CLKX,
-	AD23_2430_MCBSP4_DR,
-	AB25_2430_MCBSP4_DX,
-	AC25_2430_MCBSP4_FSX,
-
-	AE16_2430_MCBSP5_CLKX,
-	AF12_2430_MCBSP5_FSX,
-	K7_2430_MCBSP5_DX,
-	M1_2430_MCBSP5_DR,
-
-	/* 2430 McSPI*/
-	Y18_2430_MCSPI1_CLK,
-	AD15_2430_MCSPI1_SIMO,
-	AE17_2430_MCSPI1_SOMI,
-	U1_2430_MCSPI1_CS0,
-
-	/* Touchscreen GPIO */
-	AF19_2430_GPIO_85,
-
-};
-
-enum omap34xx_index {
-	/* 34xx I2C */
-	K21_34XX_I2C1_SCL,
-	J21_34XX_I2C1_SDA,
-	AF15_34XX_I2C2_SCL,
-	AE15_34XX_I2C2_SDA,
-	AF14_34XX_I2C3_SCL,
-	AG14_34XX_I2C3_SDA,
-	AD26_34XX_I2C4_SCL,
-	AE26_34XX_I2C4_SDA,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-	Y8_3430_USB1HS_PHY_CLK,
-	Y9_3430_USB1HS_PHY_STP,
-	AA14_3430_USB1HS_PHY_DIR,
-	AA11_3430_USB1HS_PHY_NXT,
-	W13_3430_USB1HS_PHY_DATA0,
-	W12_3430_USB1HS_PHY_DATA1,
-	W11_3430_USB1HS_PHY_DATA2,
-	Y11_3430_USB1HS_PHY_DATA3,
-	W9_3430_USB1HS_PHY_DATA4,
-	Y12_3430_USB1HS_PHY_DATA5,
-	W8_3430_USB1HS_PHY_DATA6,
-	Y13_3430_USB1HS_PHY_DATA7,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-	AA8_3430_USB2HS_PHY_CLK,
-	AA10_3430_USB2HS_PHY_STP,
-	AA9_3430_USB2HS_PHY_DIR,
-	AB11_3430_USB2HS_PHY_NXT,
-	AB10_3430_USB2HS_PHY_DATA0,
-	AB9_3430_USB2HS_PHY_DATA1,
-	W3_3430_USB2HS_PHY_DATA2,
-	T4_3430_USB2HS_PHY_DATA3,
-	T3_3430_USB2HS_PHY_DATA4,
-	R3_3430_USB2HS_PHY_DATA5,
-	R4_3430_USB2HS_PHY_DATA6,
-	T2_3430_USB2HS_PHY_DATA7,
-
-
-	/* TLL - HSUSB: 12-pin TLL Port 1*/
-	Y8_3430_USB1HS_TLL_CLK,
-	Y9_3430_USB1HS_TLL_STP,
-	AA14_3430_USB1HS_TLL_DIR,
-	AA11_3430_USB1HS_TLL_NXT,
-	W13_3430_USB1HS_TLL_DATA0,
-	W12_3430_USB1HS_TLL_DATA1,
-	W11_3430_USB1HS_TLL_DATA2,
-	Y11_3430_USB1HS_TLL_DATA3,
-	W9_3430_USB1HS_TLL_DATA4,
-	Y12_3430_USB1HS_TLL_DATA5,
-	W8_3430_USB1HS_TLL_DATA6,
-	Y13_3430_USB1HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 2*/
-	AA8_3430_USB2HS_TLL_CLK,
-	AA10_3430_USB2HS_TLL_STP,
-	AA9_3430_USB2HS_TLL_DIR,
-	AB11_3430_USB2HS_TLL_NXT,
-	AB10_3430_USB2HS_TLL_DATA0,
-	AB9_3430_USB2HS_TLL_DATA1,
-	W3_3430_USB2HS_TLL_DATA2,
-	T4_3430_USB2HS_TLL_DATA3,
-	T3_3430_USB2HS_TLL_DATA4,
-	R3_3430_USB2HS_TLL_DATA5,
-	R4_3430_USB2HS_TLL_DATA6,
-	T2_3430_USB2HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 3*/
-	AA6_3430_USB3HS_TLL_CLK,
-	AB3_3430_USB3HS_TLL_STP,
-	AA3_3430_USB3HS_TLL_DIR,
-	Y3_3430_USB3HS_TLL_NXT,
-	AA5_3430_USB3HS_TLL_DATA0,
-	Y4_3430_USB3HS_TLL_DATA1,
-	Y5_3430_USB3HS_TLL_DATA2,
-	W5_3430_USB3HS_TLL_DATA3,
-	AB12_3430_USB3HS_TLL_DATA4,
-	AB13_3430_USB3HS_TLL_DATA5,
-	AA13_3430_USB3HS_TLL_DATA6,
-	AA12_3430_USB3HS_TLL_DATA7,
-
-	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-	AF10_3430_USB1FS_PHY_MM1_RXDP,
-	AG9_3430_USB1FS_PHY_MM1_RXDM,
-	W13_3430_USB1FS_PHY_MM1_RXRCV,
-	W12_3430_USB1FS_PHY_MM1_TXSE0,
-	W11_3430_USB1FS_PHY_MM1_TXDAT,
-	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-	AF7_3430_USB2FS_PHY_MM2_RXDP,
-	AH7_3430_USB2FS_PHY_MM2_RXDM,
-	AB10_3430_USB2FS_PHY_MM2_RXRCV,
-	AB9_3430_USB2FS_PHY_MM2_TXSE0,
-	W3_3430_USB2FS_PHY_MM2_TXDAT,
-	T4_3430_USB2FS_PHY_MM2_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-	AH3_3430_USB3FS_PHY_MM3_RXDP,
-	AE3_3430_USB3FS_PHY_MM3_RXDM,
-	AD1_3430_USB3FS_PHY_MM3_RXRCV,
-	AE1_3430_USB3FS_PHY_MM3_TXSE0,
-	AD2_3430_USB3FS_PHY_MM3_TXDAT,
-	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
-
-	/* 34xx GPIO
-	 *  - normally these are bidirectional, no internal pullup/pulldown
-	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
-	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
-	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
-	 */
-	AF26_34XX_GPIO0,
-	AF22_34XX_GPIO9,
-	AG9_34XX_GPIO23,
-	AH8_34XX_GPIO29,
-	U8_34XX_GPIO54_OUT,
-	U8_34XX_GPIO54_DOWN,
-	L8_34XX_GPIO63,
-	G25_34XX_GPIO86_OUT,
-	AG4_34XX_GPIO134_OUT,
-	AF4_34XX_GPIO135_OUT,
-	AE4_34XX_GPIO136_OUT,
-	AF6_34XX_GPIO140_UP,
-	AE6_34XX_GPIO141,
-	AF5_34XX_GPIO142,
-	AE5_34XX_GPIO143,
-	H19_34XX_GPIO164_OUT,
-	J25_34XX_GPIO170,
-
-	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-	H16_34XX_SDRC_CKE0,
-	H17_34XX_SDRC_CKE1,
-
-	/* MMC1 */
-	N28_3430_MMC1_CLK,
-	M27_3430_MMC1_CMD,
-	N27_3430_MMC1_DAT0,
-	N26_3430_MMC1_DAT1,
-	N25_3430_MMC1_DAT2,
-	P28_3430_MMC1_DAT3,
-	P27_3430_MMC1_DAT4,
-	P26_3430_MMC1_DAT5,
-	R27_3430_MMC1_DAT6,
-	R25_3430_MMC1_DAT7,
-
-	/* MMC2 */
-	AE2_3430_MMC2_CLK,
-	AG5_3430_MMC2_CMD,
-	AH5_3430_MMC2_DAT0,
-	AH4_3430_MMC2_DAT1,
-	AG4_3430_MMC2_DAT2,
-	AF4_3430_MMC2_DAT3,
-
-	/* MMC3 */
-	AF10_3430_MMC3_CLK,
-	AC3_3430_MMC3_CMD,
-	AE11_3430_MMC3_DAT0,
-	AH9_3430_MMC3_DAT1,
-	AF13_3430_MMC3_DAT2,
-	AF13_3430_MMC3_DAT3,
-
-	/* SYS_NIRQ T2 INT1 */
-	AF26_34XX_SYS_NIRQ,
-};
-
-struct omap_mux_cfg {
-	struct pin_config	*pins;
-	unsigned long		size;
-	int			(*cfg_reg)(const struct pin_config *cfg);
-};
-
-#ifdef	CONFIG_OMAP_MUX
-/* setup pin muxing in Linux */
-extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
-extern int omap_mux_register(struct omap_mux_cfg *);
-extern int omap_cfg_reg(unsigned long reg_cfg);
-#else
-/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
-static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
-static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
deleted file mode 100644
index bdf30a0..0000000
--- a/arch/arm/plat-omap/include/mach/omap-alsa.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/omap-alsa.h
- *
- * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
- *
- * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
- *
- * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
- * Written by Daniel Petrini, David Cohen, Anderson Briglia
- *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *  History
- *  -------
- *
- *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
- *  					original version based in sa1100 driver
- *  					and omap oss driver.
- */
-
-#ifndef __OMAP_ALSA_H
-#define __OMAP_ALSA_H
-
-#include <mach/dma.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <mach/mcbsp.h>
-#include <linux/platform_device.h>
-
-#define DMA_BUF_SIZE	(1024 * 8)
-
-/*
- * Buffer management for alsa and dma
- */
-struct audio_stream {
-	char *id;		/* identification string */
-	int stream_id;		/* numeric identification */
-	int dma_dev;		/* dma number of that device */
-	int *lch;		/* Chain of channels this stream is linked to */
-	char started;		/* to store if the chain was started or not */
-	int dma_q_head;		/* DMA Channel Q Head */
-	int dma_q_tail;		/* DMA Channel Q Tail */
-	char dma_q_count;	/* DMA Channel Q Count */
-	int active:1;		/* we are using this stream for transfer now */
-	int period;		/* current transfer period */
-	int periods;		/* current count of periods registerd in the DMA engine */
-	spinlock_t dma_lock;	/* for locking in DMA operations */
-	struct snd_pcm_substream *stream;	/* the pcm stream */
-	unsigned linked:1;	/* dma channels linked */
-	int offset;		/* store start position of the last period in the alsa buffer */
-	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
-	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
-};
-
-/*
- * Alsa card structure for aic23
- */
-struct snd_card_omap_codec {
-	struct snd_card *card;
-	struct snd_pcm *pcm;
-	long samplerate;
-	struct audio_stream s[2];	/* playback & capture */
-};
-
-/* Codec specific information and function pointers.
- * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
- * are responsible for defining the function pointers.
- */
-struct omap_alsa_codec_config {
-	char 	*name;
-	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
-	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
-	struct	snd_pcm_hardware *snd_omap_alsa_playback;
-	struct	snd_pcm_hardware *snd_omap_alsa_capture;
-	void	(*codec_configure_dev)(void);
-	void	(*codec_set_samplerate)(long);
-	void	(*codec_clock_setup)(void);
-	int	(*codec_clock_on)(void);
-	int 	(*codec_clock_off)(void);
-	int	(*get_default_samplerate)(void);
-};
-
-/*********** Mixer function prototypes *************************/
-int snd_omap_mixer(struct snd_card_omap_codec *);
-void snd_omap_init_mixer(void);
-
-#ifdef CONFIG_PM
-void snd_omap_suspend_mixer(void);
-void snd_omap_resume_mixer(void);
-#endif
-
-int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
-int snd_omap_alsa_remove(struct platform_device *pdev);
-#ifdef CONFIG_PM
-int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
-int snd_omap_alsa_resume(struct platform_device *pdev);
-#else
-#define snd_omap_alsa_suspend	NULL
-#define snd_omap_alsa_resume	NULL
-#endif
-
-void callback_omap_alsa_sound_dma(void *);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
deleted file mode 100644
index f8d186a..0000000
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/omap34xx.h
- *
- * This file contains the processor specific definitions of the TI OMAP34XX.
- *
- * Copyright (C) 2007 Texas Instruments.
- * Copyright (C) 2007 Nokia Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_OMAP34XX_H
-#define __ASM_ARCH_OMAP34XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-
-#define L4_34XX_BASE		0x48000000
-#define L4_WK_34XX_BASE		0x48300000
-#define L4_PER_34XX_BASE	0x49000000
-#define L4_EMU_34XX_BASE	0x54000000
-#define L3_34XX_BASE		0x68000000
-
-#define OMAP3430_32KSYNCT_BASE	0x48320000
-#define OMAP3430_CM_BASE	0x48004800
-#define OMAP3430_PRM_BASE	0x48306800
-#define OMAP343X_SMS_BASE	0x6C000000
-#define OMAP343X_SDRC_BASE	0x6D000000
-#define OMAP34XX_GPMC_BASE	0x6E000000
-#define OMAP343X_SCM_BASE	0x48002000
-#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
-
-#define OMAP34XX_IC_BASE	0x48200000
-
-#define OMAP3430_ISP_BASE		(L4_34XX_BASE + 0xBC000)
-#define OMAP3430_ISP_CBUFF_BASE		(OMAP3430_ISP_BASE + 0x0100)
-#define OMAP3430_ISP_CCP2_BASE		(OMAP3430_ISP_BASE + 0x0400)
-#define OMAP3430_ISP_CCDC_BASE		(OMAP3430_ISP_BASE + 0x0600)
-#define OMAP3430_ISP_HIST_BASE		(OMAP3430_ISP_BASE + 0x0A00)
-#define OMAP3430_ISP_H3A_BASE		(OMAP3430_ISP_BASE + 0x0C00)
-#define OMAP3430_ISP_PREV_BASE		(OMAP3430_ISP_BASE + 0x0E00)
-#define OMAP3430_ISP_RESZ_BASE		(OMAP3430_ISP_BASE + 0x1000)
-#define OMAP3430_ISP_SBL_BASE		(OMAP3430_ISP_BASE + 0x1200)
-#define OMAP3430_ISP_MMU_BASE		(OMAP3430_ISP_BASE + 0x1400)
-#define OMAP3430_ISP_CSI2A_BASE		(OMAP3430_ISP_BASE + 0x1800)
-#define OMAP3430_ISP_CSI2PHY_BASE	(OMAP3430_ISP_BASE + 0x1970)
-
-#define OMAP3430_ISP_END		(OMAP3430_ISP_BASE         + 0x06F)
-#define OMAP3430_ISP_CBUFF_END		(OMAP3430_ISP_CBUFF_BASE   + 0x077)
-#define OMAP3430_ISP_CCP2_END		(OMAP3430_ISP_CCP2_BASE    + 0x1EF)
-#define OMAP3430_ISP_CCDC_END		(OMAP3430_ISP_CCDC_BASE    + 0x0A7)
-#define OMAP3430_ISP_HIST_END		(OMAP3430_ISP_HIST_BASE    + 0x047)
-#define OMAP3430_ISP_H3A_END		(OMAP3430_ISP_H3A_BASE     + 0x05F)
-#define OMAP3430_ISP_PREV_END		(OMAP3430_ISP_PREV_BASE    + 0x09F)
-#define OMAP3430_ISP_RESZ_END		(OMAP3430_ISP_RESZ_BASE    + 0x0AB)
-#define OMAP3430_ISP_SBL_END		(OMAP3430_ISP_SBL_BASE     + 0x0FB)
-#define OMAP3430_ISP_MMU_END		(OMAP3430_ISP_MMU_BASE     + 0x06F)
-#define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
-#define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
-
-#define OMAP34XX_IVA_INTC_BASE	0x40000000
-#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
-#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
-
-#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
-
-#define OMAP34XX_DSP_BASE	0x58000000
-#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
-#endif /* __ASM_ARCH_OMAP34XX_H */
-
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/mach/omap44xx.h
deleted file mode 100644
index b3ba5ac..0000000
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*:
- * Address mappings and base address for OMAP4 interconnects
- * and peripherals.
- *
- * Copyright (C) 2009 Texas Instruments
- *
- * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_OMAP44XX_H
-#define __ASM_ARCH_OMAP44XX_H
-
-/*
- * Please place only base defines here and put the rest in device
- * specific headers.
- */
-#define L4_44XX_BASE			0x4a000000
-#define L4_WK_44XX_BASE			0x4a300000
-#define L4_PER_44XX_BASE		0x48000000
-#define L4_EMU_44XX_BASE		0x54000000
-#define L3_44XX_BASE			0x44000000
-#define OMAP4430_32KSYNCT_BASE		0x4a304000
-#define OMAP4430_CM_BASE		0x4a004000
-#define OMAP4430_PRM_BASE		0x48306000
-#define OMAP44XX_GPMC_BASE		0x50000000
-#define OMAP443X_SCM_BASE		0x4a002000
-#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
-#define OMAP44XX_IC_BASE		0x48200000
-#define OMAP44XX_IVA_INTC_BASE		0x40000000
-#define IRQ_SIR_IRQ			0x0040
-#define OMAP44XX_GIC_DIST_BASE		0x48241000
-#define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
-#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
-#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
-#define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
-
-#endif /* __ASM_ARCH_OMAP44XX_H */
-
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/mach/omap_device.h
deleted file mode 100644
index bd0e136..0000000
--- a/arch/arm/plat-omap/include/mach/omap_device.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * omap_device headers
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
- * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
- * Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Eventually this type of functionality should either be
- * a) implemented via arch-specific pointers in platform_device
- * or
- * b) implemented as a proper omap_bus/omap_device in Linux, no more
- *    platform_device
- *
- * omap_device differs from omap_hwmod in that it includes external
- * (e.g., board- and system-level) integration details.  omap_hwmod
- * stores hardware data that is invariant for a given OMAP chip.
- *
- * To do:
- * - GPIO integration
- * - regulator integration
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <mach/omap_hwmod.h>
-
-/* omap_device._state values */
-#define OMAP_DEVICE_STATE_UNKNOWN	0
-#define OMAP_DEVICE_STATE_ENABLED	1
-#define OMAP_DEVICE_STATE_IDLE		2
-#define OMAP_DEVICE_STATE_SHUTDOWN	3
-
-/**
- * struct omap_device - omap_device wrapper for platform_devices
- * @pdev: platform_device
- * @hwmods: (one .. many per omap_device)
- * @hwmods_cnt: ARRAY_SIZE() of @hwmods
- * @pm_lats: ptr to an omap_device_pm_latency table
- * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
- * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in microseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
- * @_state: one of OMAP_DEVICE_STATE_* (see above)
- * @flags: device flags
- *
- * Integrates omap_hwmod data into Linux platform_device.
- *
- * Field names beginning with underscores are for the internal use of
- * the omap_device code.
- *
- */
-struct omap_device {
-	struct platform_device		pdev;
-	struct omap_hwmod		**hwmods;
-	struct omap_device_pm_latency	*pm_lats;
-	u32				dev_wakeup_lat;
-	u32				_dev_wakeup_lat_limit;
-	u8				pm_lats_cnt;
-	s8				pm_lat_level;
-	u8				hwmods_cnt;
-	u8				_state;
-};
-
-/* Device driver interface (call via platform_data fn ptrs) */
-
-int omap_device_enable(struct platform_device *pdev);
-int omap_device_idle(struct platform_device *pdev);
-int omap_device_shutdown(struct platform_device *pdev);
-
-/* Core code interface */
-
-int omap_device_count_resources(struct omap_device *od);
-int omap_device_fill_resources(struct omap_device *od, struct resource *res);
-
-struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
-				      struct omap_hwmod *oh, void *pdata,
-				      int pdata_len,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt);
-
-struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-					 struct omap_hwmod **oh, int oh_cnt,
-					 void *pdata, int pdata_len,
-					 struct omap_device_pm_latency *pm_lats,
-					 int pm_lats_cnt);
-
-int omap_device_register(struct omap_device *od);
-
-/* OMAP PM interface */
-int omap_device_align_pm_lat(struct platform_device *pdev,
-			     u32 new_wakeup_lat_limit);
-struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
-
-/* Other */
-
-int omap_device_idle_hwmods(struct omap_device *od);
-int omap_device_enable_hwmods(struct omap_device *od);
-
-int omap_device_disable_clocks(struct omap_device *od);
-int omap_device_enable_clocks(struct omap_device *od);
-
-
-/*
- * Entries should be kept in latency order ascending
- *
- * deact_lat is the maximum number of microseconds required to complete
- * deactivate_func() at the device's slowest OPP.
- *
- * act_lat is the maximum number of microseconds required to complete
- * activate_func() at the device's slowest OPP.
- *
- * This will result in some suboptimal power management decisions at fast
- * OPPs, but avoids having to recompute all device power management decisions
- * if the system shifts from a fast OPP to a slow OPP (in order to meet
- * latency requirements).
- *
- * XXX should deactivate_func/activate_func() take platform_device pointers
- * rather than omap_device pointers?
- */
-struct omap_device_pm_latency {
-	u32 deactivate_lat;
-	int (*deactivate_func)(struct omap_device *od);
-	u32 activate_lat;
-	int (*activate_func)(struct omap_device *od);
-};
-
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h
deleted file mode 100644
index 1f79c20..0000000
--- a/arch/arm/plat-omap/include/mach/omap_hwmod.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/*
- * omap_hwmod macros, structures
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * Created in collaboration with (alphabetical order): Benoit Cousson,
- * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
- * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These headers and macros are used to define OMAP on-chip module
- * data and their integration with other OMAP modules and Linux.
- *
- * References:
- * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
- * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
- * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
- * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
- * - Open Core Protocol Specification 2.2
- *
- * To do:
- * - add interconnect error log structures
- * - add pinmuxing
- * - init_conn_id_bit (CONNID_BIT_VECTOR)
- * - implement default hwmod SMS/SDRC flags?
- *
- */
-#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-
-#include <mach/cpu.h>
-
-struct omap_device;
-
-/* OCP SYSCONFIG bit shifts/masks */
-#define SYSC_MIDLEMODE_SHIFT		12
-#define SYSC_MIDLEMODE_MASK		(0x3 << SYSC_MIDLEMODE_SHIFT)
-#define SYSC_CLOCKACTIVITY_SHIFT	8
-#define SYSC_CLOCKACTIVITY_MASK		(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
-#define SYSC_SIDLEMODE_SHIFT		3
-#define SYSC_SIDLEMODE_MASK		(0x3 << SYSC_SIDLEMODE_SHIFT)
-#define SYSC_ENAWAKEUP_SHIFT		2
-#define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
-#define SYSC_SOFTRESET_SHIFT		1
-#define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
-
-/* OCP SYSSTATUS bit shifts/masks */
-#define SYSS_RESETDONE_SHIFT		0
-#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
-
-/* Master standby/slave idle mode flags */
-#define HWMOD_IDLEMODE_FORCE		(1 << 0)
-#define HWMOD_IDLEMODE_NO		(1 << 1)
-#define HWMOD_IDLEMODE_SMART		(1 << 2)
-
-
-/**
- * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
- * @name: name of the DMA channel (module local name)
- * @dma_ch: DMA channel ID
- *
- * @name should be something short, e.g., "tx" or "rx".  It is for use
- * by platform_get_resource_byname().  It is defined locally to the
- * hwmod.
- */
-struct omap_hwmod_dma_info {
-	const char	*name;
-	u16		dma_ch;
-};
-
-/**
- * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
- * @role: "sys", "32k", "tv", etc -- for use in clk_get()
- * @clkdev_dev_id: opt clock: clkdev dev_id string
- * @clkdev_con_id: opt clock: clkdev con_id string
- * @_clk: pointer to the struct clk (filled in at runtime)
- *
- * The module's interface clock and main functional clock should not
- * be added as optional clocks.
- */
-struct omap_hwmod_opt_clk {
-	const char	*role;
-	const char	*clkdev_dev_id;
-	const char	*clkdev_con_id;
-	struct clk	*_clk;
-};
-
-
-/* omap_hwmod_omap2_firewall.flags bits */
-#define OMAP_FIREWALL_L3		(1 << 0)
-#define OMAP_FIREWALL_L4		(1 << 1)
-
-/**
- * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
- * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
- * @l4_fw_region: L4 firewall region ID
- * @l4_prot_group: L4 protection group ID
- * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
- */
-struct omap_hwmod_omap2_firewall {
-	u8 l3_perm_bit;
-	u8 l4_fw_region;
-	u8 l4_prot_group;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_addr_space.flags bits
- *
- * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
- * ADDR_TYPE_RT: Address space contains module register target data.
- */
-#define ADDR_MAP_ON_INIT	(1 << 0)
-#define ADDR_TYPE_RT		(1 << 1)
-
-/**
- * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
- * @pa_start: starting physical address
- * @pa_end: ending physical address
- * @flags: (see omap_hwmod_addr_space.flags macros above)
- *
- * Address space doesn't necessarily follow physical interconnect
- * structure.  GPMC is one example.
- */
-struct omap_hwmod_addr_space {
-	u32 pa_start;
-	u32 pa_end;
-	u8 flags;
-};
-
-
-/*
- * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
- * interface to interact with the hwmod.  Used to add sleep dependencies
- * when the module is enabled or disabled.
- */
-#define OCP_USER_MPU			(1 << 0)
-#define OCP_USER_SDMA			(1 << 1)
-
-/* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_HAS_IDLEST		(1 << 0)
-#define OCPIF_SWSUP_IDLE		(1 << 1)
-#define OCPIF_CAN_BURST			(1 << 2)
-
-/**
- * struct omap_hwmod_ocp_if - OCP interface data
- * @master: struct omap_hwmod that initiates OCP transactions on this link
- * @slave: struct omap_hwmod that responds to OCP transactions on this link
- * @addr: address space associated with this link
- * @clkdev_dev_id: interface clock: clkdev dev_id string
- * @clkdev_con_id: interface clock: clkdev con_id string
- * @_clk: pointer to the interface struct clk (filled in at runtime)
- * @fw: interface firewall data
- * @addr_cnt: ARRAY_SIZE(@addr)
- * @width: OCP data width
- * @thread_cnt: number of threads
- * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
- * @user: initiators using this interface (see OCP_USER_* macros above)
- * @flags: OCP interface flags (see OCPIF_* macros above)
- *
- * It may also be useful to add a tag_cnt field for OCP2.x devices.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod_ocp_if {
-	struct omap_hwmod		*master;
-	struct omap_hwmod		*slave;
-	struct omap_hwmod_addr_space	*addr;
-	const char			*clkdev_dev_id;
-	const char			*clkdev_con_id;
-	struct clk			*_clk;
-	union {
-		struct omap_hwmod_omap2_firewall omap2;
-	}				fw;
-	u8				addr_cnt;
-	u8				width;
-	u8				thread_cnt;
-	u8				max_burst_len;
-	u8				user;
-	u8				flags;
-};
-
-
-/* Macros for use in struct omap_hwmod_sysconfig */
-
-/* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT	2
-#define SLAVE_IDLE_SHIFT	0
-#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
-#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
-#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
-#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
-#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
-
-/* omap_hwmod_sysconfig.sysc_flags capability flags */
-#define SYSC_HAS_AUTOIDLE	(1 << 0)
-#define SYSC_HAS_SOFTRESET	(1 << 1)
-#define SYSC_HAS_ENAWAKEUP	(1 << 2)
-#define SYSC_HAS_EMUFREE	(1 << 3)
-#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
-#define SYSC_HAS_SIDLEMODE	(1 << 5)
-#define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_MISSING		(1 << 7)
-
-/* omap_hwmod_sysconfig.clockact flags */
-#define CLOCKACT_TEST_BOTH	0x0
-#define CLOCKACT_TEST_MAIN	0x1
-#define CLOCKACT_TEST_ICLK	0x2
-#define CLOCKACT_TEST_NONE	0x3
-
-/**
- * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
- * @rev_offs: IP block revision register offset (from module base addr)
- * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
- * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
- * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
- * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
- * @clockact: the default value of the module CLOCKACTIVITY bits
- *
- * @clockact describes to the module which clocks are likely to be
- * disabled when the PRCM issues its idle request to the module.  Some
- * modules have separate clockdomains for the interface clock and main
- * functional clock, and can check whether they should acknowledge the
- * idle request based on the internal module functionality that has
- * been associated with the clocks marked in @clockact.  This field is
- * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
- *
- */
-struct omap_hwmod_sysconfig {
-	u16 rev_offs;
-	u16 sysc_offs;
-	u16 syss_offs;
-	u8 idlemodes;
-	u8 sysc_flags;
-	u8 clockact;
-};
-
-/**
- * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM
- * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
- * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
- * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
- * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
- * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
- *
- * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
- * WKEN, GRPSEL registers.  In an ideal world, no extra information
- * would be needed for IDLEST information, but alas, there are some
- * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
- * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
- */
-struct omap_hwmod_omap2_prcm {
-	s16 module_offs;
-	u8 prcm_reg_id;
-	u8 module_bit;
-	u8 idlest_reg_id;
-	u8 idlest_idle_bit;
-	u8 idlest_stdby_bit;
-};
-
-
-/**
- * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
- * @device_offs: device register offset from @module_offs
- * @submodule_wkdep_bit: bit shift of the WKDEP range
- */
-struct omap_hwmod_omap4_prcm {
-	u32 module_offs;
-	u16 device_offs;
-	u8 submodule_wkdep_bit;
-};
-
-
-/*
- * omap_hwmod.flags definitions
- *
- * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
- *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
- * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- *     SDRAM controller, etc.
- * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- *     controller, etc.
- * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- */
-#define HWMOD_SWSUP_SIDLE			(1 << 0)
-#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
-#define HWMOD_INIT_NO_RESET			(1 << 2)
-#define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
-
-/*
- * omap_hwmod._int_flags definitions
- * These are for internal use only and are managed by the omap_hwmod code.
- *
- * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
- * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
- */
-#define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
-
-/*
- * omap_hwmod._state definitions
- *
- * INITIALIZED: reset (optionally), initialized, enabled, disabled
- *              (optionally)
- *
- *
- */
-#define _HWMOD_STATE_UNKNOWN			0
-#define _HWMOD_STATE_REGISTERED			1
-#define _HWMOD_STATE_CLKS_INITED		2
-#define _HWMOD_STATE_INITIALIZED		3
-#define _HWMOD_STATE_ENABLED			4
-#define _HWMOD_STATE_IDLE			5
-#define _HWMOD_STATE_DISABLED			6
-
-/**
- * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
- * @name: name of the hwmod
- * @od: struct omap_device currently associated with this hwmod (internal use)
- * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
- * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
- * @prcm: PRCM data pertaining to this hwmod
- * @clkdev_dev_id: main clock: clkdev dev_id string
- * @clkdev_con_id: main clock: clkdev con_id string
- * @_clk: pointer to the main struct clk (filled in at runtime)
- * @opt_clks: other device clocks that drivers can request (0..*)
- * @masters: ptr to array of OCP ifs that this hwmod can initiate on
- * @slaves: ptr to array of OCP ifs that this hwmod can respond on
- * @sysconfig: device SYSCONFIG/SYSSTATUS register data
- * @dev_attr: arbitrary device attributes that can be passed to the driver
- * @_sysc_cache: internal-use hwmod flags
- * @_rt_va: cached register target start address (internal use)
- * @_mpu_port_index: cached MPU register target slave ID (internal use)
- * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
- * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
- * @mpu_irqs_cnt: number of @mpu_irqs
- * @sdma_chs_cnt: number of @sdma_chs
- * @opt_clks_cnt: number of @opt_clks
- * @master_cnt: number of @master entries
- * @slaves_cnt: number of @slave entries
- * @response_lat: device OCP response latency (in interface clock cycles)
- * @_int_flags: internal-use hwmod flags
- * @_state: internal-use hwmod state
- * @flags: hwmod flags (documented below)
- * @omap_chip: OMAP chips this hwmod is present on
- * @node: list node for hwmod list (internal use)
- *
- * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
- * clock," which for our purposes is defined as "the functional clock needed
- * for register accesses to complete."  Modules may not have a main clock if
- * the interface clock also serves as a main clock.
- *
- * Parameter names beginning with an underscore are managed internally by
- * the omap_hwmod code and should not be set during initialization.
- */
-struct omap_hwmod {
-	const char			*name;
-	struct omap_device		*od;
-	u8				*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_chs;
-	union {
-		struct omap_hwmod_omap2_prcm omap2;
-		struct omap_hwmod_omap4_prcm omap4;
-	}				prcm;
-	const char			*clkdev_dev_id;
-	const char			*clkdev_con_id;
-	struct clk			*_clk;
-	struct omap_hwmod_opt_clk	*opt_clks;
-	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
-	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
-	struct omap_hwmod_sysconfig	*sysconfig;
-	void				*dev_attr;
-	u32				_sysc_cache;
-	void __iomem			*_rt_va;
-	struct list_head		node;
-	u16				flags;
-	u8				_mpu_port_index;
-	u8				msuspendmux_reg_id;
-	u8				msuspendmux_shift;
-	u8				response_lat;
-	u8				mpu_irqs_cnt;
-	u8				sdma_chs_cnt;
-	u8				opt_clks_cnt;
-	u8				masters_cnt;
-	u8				slaves_cnt;
-	u8				hwmods_cnt;
-	u8				_int_flags;
-	u8				_state;
-	const struct omap_chip_id	omap_chip;
-};
-
-int omap_hwmod_init(struct omap_hwmod **ohs);
-int omap_hwmod_register(struct omap_hwmod *oh);
-int omap_hwmod_unregister(struct omap_hwmod *oh);
-struct omap_hwmod *omap_hwmod_lookup(const char *name);
-int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
-int omap_hwmod_late_init(void);
-
-int omap_hwmod_enable(struct omap_hwmod *oh);
-int omap_hwmod_idle(struct omap_hwmod *oh);
-int omap_hwmod_shutdown(struct omap_hwmod *oh);
-
-int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
-int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
-
-int omap_hwmod_reset(struct omap_hwmod *oh);
-void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
-
-void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
-u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
-
-int omap_hwmod_count_resources(struct omap_hwmod *oh);
-int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
-
-struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
-
-int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
-				 struct omap_hwmod *init_oh);
-
-int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
-int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
-
-int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
-int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
deleted file mode 100644
index b226bdf..0000000
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * File: arch/arm/plat-omap/include/mach/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <mach/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	u32		paddr;
-	void __iomem	*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*set_rotate)	  (int angle);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	const struct lcd_ctrl	*ctrl;			/* LCD controller */
-	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_reserve_sdram(void);
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/mach/powerdomain.h
deleted file mode 100644
index fa64614..0000000
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * OMAP2/3 powerdomain control
- *
- * Copyright (C) 2007-8 Texas Instruments, Inc.
- * Copyright (C) 2007-8 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN
-#define ASM_ARM_ARCH_OMAP_POWERDOMAIN
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-#include <asm/atomic.h>
-
-#include <mach/cpu.h>
-
-
-/* Powerdomain basic power states */
-#define PWRDM_POWER_OFF		0x0
-#define PWRDM_POWER_RET		0x1
-#define PWRDM_POWER_INACTIVE	0x2
-#define PWRDM_POWER_ON		0x3
-
-/* Powerdomain allowable state bitfields */
-#define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
-				 (1 << PWRDM_POWER_ON))
-
-#define PWRSTS_OFF_RET		((1 << PWRDM_POWER_OFF) | \
-				 (1 << PWRDM_POWER_RET))
-
-#define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
-
-
-/* Powerdomain flags */
-#define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
-
-
-/*
- * Number of memory banks that are power-controllable.	On OMAP3430, the
- * maximum is 4.
- */
-#define PWRDM_MAX_MEM_BANKS	4
-
-/*
- * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP3 is the worst case
- */
-#define PWRDM_MAX_CLKDMS	4
-
-/* XXX A completely arbitrary number. What is reasonable here? */
-#define PWRDM_TRANSITION_BAILOUT 100000
-
-struct clockdomain;
-struct powerdomain;
-
-/* Encodes dependencies between powerdomains - statically defined */
-struct pwrdm_dep {
-
-	/* Powerdomain name */
-	const char *pwrdm_name;
-
-	/* Powerdomain pointer - resolved by the powerdomain code */
-	struct powerdomain *pwrdm;
-
-	/* Flags to mark OMAP chip restrictions, etc. */
-	const struct omap_chip_id omap_chip;
-
-};
-
-struct powerdomain {
-
-	/* Powerdomain name */
-	const char *name;
-
-	/* the address offset from CM_BASE/PRM_BASE */
-	const s16 prcm_offs;
-
-	/* Used to represent the OMAP chip types containing this pwrdm */
-	const struct omap_chip_id omap_chip;
-
-	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
-	const u8 dep_bit;
-
-	/* Powerdomains that can be told to wake this powerdomain up */
-	struct pwrdm_dep *wkdep_srcs;
-
-	/* Powerdomains that can be told to keep this pwrdm from inactivity */
-	struct pwrdm_dep *sleepdep_srcs;
-
-	/* Possible powerdomain power states */
-	const u8 pwrsts;
-
-	/* Possible logic power states when pwrdm in RETENTION */
-	const u8 pwrsts_logic_ret;
-
-	/* Powerdomain flags */
-	const u8 flags;
-
-	/* Number of software-controllable memory banks in this powerdomain */
-	const u8 banks;
-
-	/* Possible memory bank pwrstates when pwrdm in RETENTION */
-	const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
-
-	/* Possible memory bank pwrstates when pwrdm is ON */
-	const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
-
-	/* Clockdomains in this powerdomain */
-	struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
-
-	struct list_head node;
-
-	int state;
-	unsigned state_counter[4];
-
-#ifdef CONFIG_PM_DEBUG
-	s64 timer;
-	s64 state_timer[4];
-#endif
-};
-
-
-void pwrdm_init(struct powerdomain **pwrdm_list);
-
-int pwrdm_register(struct powerdomain *pwrdm);
-int pwrdm_unregister(struct powerdomain *pwrdm);
-struct powerdomain *pwrdm_lookup(const char *name);
-
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
-			void *user);
-
-int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
-			 int (*fn)(struct powerdomain *pwrdm,
-				   struct clockdomain *clkdm));
-
-int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
-
-int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
-
-int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
-int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
-
-int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-
-int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-
-int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
-int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
-bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
-
-int pwrdm_wait_transition(struct powerdomain *pwrdm);
-
-int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
deleted file mode 100644
index cda2a70..0000000
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/prcm.h
- *
- * Access definations for use in OMAP24XX clock and power management
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
-#define __ASM_ARM_ARCH_OMAP_PRCM_H
-
-u32 omap_prcm_get_reset_sources(void);
-void omap_prcm_arch_reset(char mode);
-int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
-
-#endif
-
-
-
-
-
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
deleted file mode 100644
index 1c09c78..0000000
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef ____ASM_ARCH_SDRC_H
-#define ____ASM_ARCH_SDRC_H
-
-/*
- * OMAP2/3 SDRC/SMS register definitions
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Tony Lindgren
- * Paul Walmsley
- * Richard Woodruff
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <mach/io.h>
-
-/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
-
-#define SDRC_SYSCONFIG		0x010
-#define SDRC_CS_CFG		0x040
-#define SDRC_SHARING		0x044
-#define SDRC_ERR_TYPE		0x04C
-#define SDRC_DLLA_CTRL		0x060
-#define SDRC_DLLA_STATUS	0x064
-#define SDRC_DLLB_CTRL		0x068
-#define SDRC_DLLB_STATUS	0x06C
-#define SDRC_POWER		0x070
-#define SDRC_MCFG_0		0x080
-#define SDRC_MR_0		0x084
-#define SDRC_EMR2_0		0x08c
-#define SDRC_ACTIM_CTRL_A_0	0x09c
-#define SDRC_ACTIM_CTRL_B_0	0x0a0
-#define SDRC_RFR_CTRL_0		0x0a4
-#define SDRC_MANUAL_0		0x0a8
-#define SDRC_MCFG_1		0x0B0
-#define SDRC_MR_1		0x0B4
-#define SDRC_EMR2_1		0x0BC
-#define SDRC_ACTIM_CTRL_A_1	0x0C4
-#define SDRC_ACTIM_CTRL_B_1	0x0C8
-#define SDRC_RFR_CTRL_1		0x0D4
-#define SDRC_MANUAL_1		0x0D8
-
-/*
- * These values represent the number of memory clock cycles between
- * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
- * rows per device, and include a subtraction of a 50 cycle window in the
- * event that the autorefresh command is delayed due to other SDRC activity.
- * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
- * counter reaches 0.
- *
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
-#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-
-/*
- * SMS register access
- */
-
-#define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
-#define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
-#define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
-
-/* SMS register offsets - read/write with sms_{read,write}_reg() */
-
-#define SMS_SYSCONFIG		0x010
-/* REVISIT: fill in other SMS registers here */
-
-
-#ifndef __ASSEMBLER__
-
-/**
- * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
- * @rate: SDRC clock rate (in Hz)
- * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
- * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
- * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
- * @mr: Value to program to SDRC_MR for this rate
- *
- * This structure holds a pre-computed set of register values for the
- * SDRC for a given SDRC clock rate and SDRAM chip.  These are
- * intended to be pre-computed and specified in an array in the board-*.c
- * files.  The structure is keyed off the 'rate' field.
- */
-struct omap_sdrc_params {
-	unsigned long rate;
-	u32 actim_ctrla;
-	u32 actim_ctrlb;
-	u32 rfr_ctrl;
-	u32 mr;
-};
-
-void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
-			    struct omap_sdrc_params *sdrc_cs1);
-int omap2_sdrc_get_params(unsigned long r,
-			  struct omap_sdrc_params **sdrc_cs0,
-			  struct omap_sdrc_params **sdrc_cs1);
-
-#ifdef CONFIG_ARCH_OMAP2
-
-struct memory_timings {
-	u32 m_type;		/* ddr = 1, sdr = 0 */
-	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
-	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
-	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
-	u32 base_cs;		/* base chip select to use for calculations */
-};
-
-extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
-
-u32 omap2xxx_sdrc_dll_is_unlocked(void);
-u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
-
-#endif  /* CONFIG_ARCH_OMAP2 */
-
-#endif  /* __ASSEMBLER__ */
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
deleted file mode 100644
index e249186..0000000
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/serial.h
- *
- * Copyright (C) 2009 Texas Instruments
- * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SERIAL_H
-#define __ASM_ARCH_SERIAL_H
-
-#include <linux/init.h>
-
-#if defined(CONFIG_ARCH_OMAP1)
-/* OMAP1 serial ports */
-#define OMAP_UART1_BASE		0xfffb0000
-#define OMAP_UART2_BASE		0xfffb0800
-#define OMAP_UART3_BASE		0xfffb9800
-#define OMAP_MAX_NR_PORTS	3
-#elif defined(CONFIG_ARCH_OMAP2)
-/* OMAP2 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	3
-#elif defined(CONFIG_ARCH_OMAP3)
-/* OMAP3 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x49020000
-#define OMAP_MAX_NR_PORTS	3
-#elif defined(CONFIG_ARCH_OMAP4)
-/* OMAP4 serial ports */
-#define OMAP_UART1_BASE		0x4806a000
-#define OMAP_UART2_BASE		0x4806c000
-#define OMAP_UART3_BASE		0x48020000
-#define OMAP_UART4_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	4
-#endif
-
-#define OMAP1510_BASE_BAUD	(12000000/16)
-#define OMAP16XX_BASE_BAUD	(48000000/16)
-#define OMAP24XX_BASE_BAUD	(48000000/16)
-
-#define is_omap_port(pt)	({int __ret = 0;			\
-			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\
-			    (pt)->port.mapbase == OMAP_UART2_BASE ||	\
-			    (pt)->port.mapbase == OMAP_UART3_BASE)	\
-				__ret = 1;				\
-			__ret;						\
-			})
-
-#ifndef __ASSEMBLER__
-extern void __init omap_serial_early_init(void);
-extern void omap_serial_init(void);
-extern int omap_uart_can_sleep(void);
-extern void omap_uart_check_wakeup(void);
-extern void omap_uart_prepare_suspend(void);
-extern void omap_uart_prepare_idle(int num);
-extern void omap_uart_resume_idle(int num);
-extern void omap_uart_enable_irqs(int enable);
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
deleted file mode 100644
index 8974e3f..0000000
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-extern int __init omap_sram_init(void);
-extern void * omap_sram_push(void * start, unsigned long size);
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-				u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-				      u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
-						u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
-						int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
-						u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
deleted file mode 100644
index ed8ec74..0000000
--- a/arch/arm/plat-omap/include/mach/system.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <mach/prcm.h>
-
-#ifndef CONFIG_MACH_VOICEBLUE
-#define voiceblue_reset()		do {} while (0)
-#else
-extern void voiceblue_reset(void);
-#endif
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-static inline void omap1_arch_reset(char mode)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
-				 DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	if (machine_is_voiceblue())
-		voiceblue_reset();
-	else
-		omap_writew(1, ARM_RSTCT1);
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (!cpu_class_is_omap2())
-		omap1_arch_reset(mode);
-	else
-		omap_prcm_arch_reset(mode);
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
deleted file mode 100644
index 0814c5f..0000000
--- a/arch/arm/plat-omap/include/mach/uncompress.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <mach/serial.h>
-
-unsigned int system_rev;
-
-#define UART_OMAP_MDR1		0x08	/* mode definition register */
-#define OMAP_ID_730		0x355F
-#define ID_MASK			0x7fff
-#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
-#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
-
-static void putc(int c)
-{
-	volatile u8 * uart = 0;
-	int shift = 2;
-
-#ifdef CONFIG_MACH_OMAP_PALMTE
-	return;
-#endif
-
-#ifdef CONFIG_ARCH_OMAP
-#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
-	uart = (volatile u8 *)(OMAP_UART3_BASE);
-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
-	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
-	uart = (volatile u8 *)(OMAP_UART1_BASE);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP1
-	/* Determine which serial port to use */
-	do {
-		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
-		unsigned int omap_id = omap_get_id();
-
-		if (omap_id == OMAP_ID_730)
-			shift = 0;
-
-		if (check_port(uart, shift))
-			break;
-		/* Silent boot if no serial ports are enabled. */
-		return;
-	} while (0);
-#endif /* CONFIG_ARCH_OMAP1 */
-#endif
-
-	/*
-	 * Now, xmit each character
-	 */
-	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX << shift] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
deleted file mode 100644
index f337e17..0000000
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ /dev/null
@@ -1,145 +0,0 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <mach/board.h>
-
-/*-------------------------------------------------------------------------*/
-
-#define OMAP1_OTG_BASE			0xfffb0400
-#define OMAP1_UDC_BASE			0xfffb4000
-#define OMAP1_OHCI_BASE			0xfffba000
-
-#define OMAP2_OHCI_BASE			0x4805e000
-#define OMAP2_UDC_BASE			0x4805e200
-#define OMAP2_OTG_BASE			0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE			OMAP1_OTG_BASE
-#define UDC_BASE			OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE			OMAP2_OTG_BASE
-#define UDC_BASE			OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
-
-extern void usb_musb_init(void);
-
-#endif
-
-void omap_usb_init(struct omap_usb_config *pdata);
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV				(OTG_BASE + 0x00)
-#define OTG_SYSCON_1			(OTG_BASE + 0x04)
-#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
-#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
-#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
-#	define	 OTG_IDLE_EN		(1 << 15)
-#	define	 HST_IDLE_EN		(1 << 14)
-#	define	 DEV_IDLE_EN		(1 << 13)
-#	define	 OTG_RESET_DONE		(1 << 2)
-#	define	 OTG_SOFT_RESET		(1 << 1)
-#define OTG_SYSCON_2			(OTG_BASE + 0x08)
-#	define	 OTG_EN			(1 << 31)
-#	define	 USBX_SYNCHRO		(1 << 30)
-#	define	 OTG_MST16		(1 << 29)
-#	define	 SRP_GPDATA		(1 << 28)
-#	define	 SRP_GPDVBUS		(1 << 27)
-#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
-#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
-#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
-#	define	 SRP_DPW		(1 << 14)
-#	define	 SRP_DATA		(1 << 13)
-#	define	 SRP_VBUS		(1 << 12)
-#	define	 OTG_PADEN		(1 << 10)
-#	define	 HMC_PADEN		(1 << 9)
-#	define	 UHOST_EN		(1 << 8)
-#	define	 HMC_TLLSPEED		(1 << 7)
-#	define	 HMC_TLLATTACH		(1 << 6)
-#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
-#define OTG_CTRL			(OTG_BASE + 0x0c)
-#	define	 OTG_USB2_EN		(1 << 29)
-#	define	 OTG_USB2_DP		(1 << 28)
-#	define	 OTG_USB2_DM		(1 << 27)
-#	define	 OTG_USB1_EN		(1 << 26)
-#	define	 OTG_USB1_DP		(1 << 25)
-#	define	 OTG_USB1_DM		(1 << 24)
-#	define	 OTG_USB0_EN		(1 << 23)
-#	define	 OTG_USB0_DP		(1 << 22)
-#	define	 OTG_USB0_DM		(1 << 21)
-#	define	 OTG_ASESSVLD		(1 << 20)
-#	define	 OTG_BSESSEND		(1 << 19)
-#	define	 OTG_BSESSVLD		(1 << 18)
-#	define	 OTG_VBUSVLD		(1 << 17)
-#	define	 OTG_ID			(1 << 16)
-#	define	 OTG_DRIVER_SEL		(1 << 15)
-#	define	 OTG_A_SETB_HNPEN	(1 << 12)
-#	define	 OTG_A_BUSREQ		(1 << 11)
-#	define	 OTG_B_HNPEN		(1 << 9)
-#	define	 OTG_B_BUSREQ		(1 << 8)
-#	define	 OTG_BUSDROP		(1 << 7)
-#	define	 OTG_PULLDOWN		(1 << 5)
-#	define	 OTG_PULLUP		(1 << 4)
-#	define	 OTG_DRV_VBUS		(1 << 3)
-#	define	 OTG_PD_VBUS		(1 << 2)
-#	define	 OTG_PU_VBUS		(1 << 1)
-#	define	 OTG_PU_ID		(1 << 0)
-#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
-#	define	 DRIVER_SWITCH		(1 << 15)
-#	define	 A_VBUS_ERR		(1 << 13)
-#	define	 A_REQ_TMROUT		(1 << 12)
-#	define	 A_SRP_DETECT		(1 << 11)
-#	define	 B_HNP_FAIL		(1 << 10)
-#	define	 B_SRP_TMROUT		(1 << 9)
-#	define	 B_SRP_DONE		(1 << 8)
-#	define	 B_SRP_STARTED		(1 << 7)
-#	define	 OPRT_CHG		(1 << 0)
-#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
-	// same bits as in IRQ_EN
-#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
-#	define	 OTGVPD			(1 << 14)
-#	define	 OTGVPU			(1 << 13)
-#	define	 OTGPUID		(1 << 12)
-#	define	 USB2VDR		(1 << 10)
-#	define	 USB2PDEN		(1 << 9)
-#	define	 USB2PUEN		(1 << 8)
-#	define	 USB1VDR		(1 << 6)
-#	define	 USB1PDEN		(1 << 5)
-#	define	 USB1PUEN		(1 << 4)
-#	define	 USB0VDR		(1 << 2)
-#	define	 USB0PDEN		(1 << 1)
-#	define	 USB0PUEN		(1 << 0)
-#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
-#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
-#	define	CONF_USB2_UNI_R		(1 << 8)
-#	define	CONF_USB1_UNI_R		(1 << 7)
-#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
-#	define	CONF_USB0_ISOLATE_R	(1 << 3)
-#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
-#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
-
-/* OMAP2 */
-#	define	USB_UNIDIR			0x0
-#	define	USB_UNIDIR_TLL			0x1
-#	define	USB_BIDIR			0x2
-#	define	USB_BIDIR_TLL			0x3
-#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
-#	define	USBT2TLL5PI		(1 << 17)
-#	define	USB0PUENACTLOI		(1 << 16)
-#	define	USBSTANDBYCTRL		(1 << 15)
-
-#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
deleted file mode 100644
index b97dfaf..0000000
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  arch/arm/plat-omap/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
-
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/blizzard.h
rename to arch/arm/plat-omap/include/plat/blizzard.h
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/board-ams-delta.h
rename to arch/arm/plat-omap/include/plat/board-ams-delta.h
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/board-sx1.h
rename to arch/arm/plat-omap/include/plat/board-sx1.h
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/board-voiceblue.h
rename to arch/arm/plat-omap/include/plat/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
new file mode 100644
index 0000000..abb17b6
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -0,0 +1,178 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+	int default_intensity;
+	int (*set_power)(struct device *dev, int state);
+	int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+	const char *name;
+	int intensity_timer;
+	int blink_timer;
+	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/clkdev.h
rename to arch/arm/plat-omap/include/plat/clkdev.h
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/plat/clock.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/clock.h
rename to arch/arm/plat-omap/include/plat/clock.h
diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
new file mode 100644
index 0000000..eb73482
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -0,0 +1,111 @@
+/*
+ * arch/arm/plat-omap/include/mach/clockdomain.h
+ *
+ * OMAP2/3 clockdomain framework functions
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+
+/* Clockdomain capability flags */
+#define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
+#define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
+#define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
+#define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
+
+#define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
+#define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
+#define CLKDM_CAN_HWSUP_SWSUP	(CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
+
+/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
+#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
+#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
+
+/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
+#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
+#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
+#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
+#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
+
+/*
+ * struct clkdm_pwrdm_autodep - a powerdomain that should have wkdeps
+ * and sleepdeps added when a powerdomain should stay active in hwsup mode;
+ * and conversely, removed when the powerdomain should be allowed to go
+ * inactive in hwsup mode.
+ */
+struct clkdm_pwrdm_autodep {
+
+	union {
+		/* Name of the powerdomain to add a wkdep/sleepdep on */
+		const char *name;
+
+		/* Powerdomain pointer (looked up at clkdm_init() time) */
+		struct powerdomain *ptr;
+	} pwrdm;
+
+	/* OMAP chip types that this clockdomain dep is valid on */
+	const struct omap_chip_id omap_chip;
+
+};
+
+struct clockdomain {
+
+	/* Clockdomain name */
+	const char *name;
+
+	union {
+		/* Powerdomain enclosing this clockdomain */
+		const char *name;
+
+		/* Powerdomain pointer assigned at clkdm_register() */
+		struct powerdomain *ptr;
+	} pwrdm;
+
+	/* CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg */
+	const u16 clktrctrl_mask;
+
+	/* Clockdomain capability flags */
+	const u8 flags;
+
+	/* OMAP chip types that this clockdomain is valid on */
+	const struct omap_chip_id omap_chip;
+
+	/* Usecount tracking */
+	atomic_t usecount;
+
+	struct list_head node;
+
+};
+
+void clkdm_init(struct clockdomain **clkdms, struct clkdm_pwrdm_autodep *autodeps);
+int clkdm_register(struct clockdomain *clkdm);
+int clkdm_unregister(struct clockdomain *clkdm);
+struct clockdomain *clkdm_lookup(const char *name);
+
+int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
+			void *user);
+struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
+
+void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
+void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
+
+int omap2_clkdm_wakeup(struct clockdomain *clkdm);
+int omap2_clkdm_sleep(struct clockdomain *clkdm);
+
+int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
+int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
new file mode 100644
index 0000000..064f173
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/i2c.h>
+
+struct sys_timer;
+
+/* used by omap-smp.c and board-4430sdp.c */
+extern void __iomem *gic_cpu_base_addr;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap_timer;
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+/* IO bases for various OMAP processors */
+struct omap_globals {
+	u32		class;		/* OMAP class to detect */
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;		/* SDRAM Controller */
+	void __iomem	*sms;		/* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;		/* System Control Module */
+	void __iomem	*prm;		/* Power and Reset Management */
+	void __iomem	*cm;		/* Clock Management */
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
new file mode 100644
index 0000000..2ae8843
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -0,0 +1,325 @@
+/*
+ * arch/arm/plat-omap/include/mach/control.h
+ *
+ * OMAP2/3/4 System Control Module definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+#include <mach/io.h>
+
+#ifndef __ASSEMBLY__
+#define OMAP242X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE		0x000
+#define OMAP2_CONTROL_PADCONFS		0x030
+#define OMAP2_CONTROL_GENERAL		0x270
+#define OMAP343X_CONTROL_MEM_WKUP	0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+#define OMAP243X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x0230)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
+
+#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
+					+ ((i) >> 1) * 4 + (!(i) & 1) * 2)
+#define OMAP343X_CONTROL_PROG_IO0	(OMAP2_CONTROL_GENERAL + 0x01D4)
+#define OMAP343X_CONTROL_PROG_IO1	(OMAP2_CONTROL_GENERAL + 0x01D8)
+#define OMAP343X_CONTROL_DSS_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E0)
+#define OMAP343X_CONTROL_CORE_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E4)
+#define OMAP343X_CONTROL_PER_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E8)
+#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01EC)
+#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02B0)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02B4)
+#define OMAP343X_CONTROL_SRAMLDO4	(OMAP2_CONTROL_GENERAL + 0x02B8)
+#define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
+#define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
+
+
+/* 34xx PADCONF register offsets */
+#define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
+						(i)*2)
+#define OMAP343X_PADCONF_ETK_CLK	OMAP343X_PADCONF_ETK(0)
+#define OMAP343X_PADCONF_ETK_CTL	OMAP343X_PADCONF_ETK(1)
+#define OMAP343X_PADCONF_ETK_D0		OMAP343X_PADCONF_ETK(2)
+#define OMAP343X_PADCONF_ETK_D1		OMAP343X_PADCONF_ETK(3)
+#define OMAP343X_PADCONF_ETK_D2		OMAP343X_PADCONF_ETK(4)
+#define OMAP343X_PADCONF_ETK_D3		OMAP343X_PADCONF_ETK(5)
+#define OMAP343X_PADCONF_ETK_D4		OMAP343X_PADCONF_ETK(6)
+#define OMAP343X_PADCONF_ETK_D5		OMAP343X_PADCONF_ETK(7)
+#define OMAP343X_PADCONF_ETK_D6		OMAP343X_PADCONF_ETK(8)
+#define OMAP343X_PADCONF_ETK_D7		OMAP343X_PADCONF_ETK(9)
+#define OMAP343X_PADCONF_ETK_D8		OMAP343X_PADCONF_ETK(10)
+#define OMAP343X_PADCONF_ETK_D9		OMAP343X_PADCONF_ETK(11)
+#define OMAP343X_PADCONF_ETK_D10	OMAP343X_PADCONF_ETK(12)
+#define OMAP343X_PADCONF_ETK_D11	OMAP343X_PADCONF_ETK(13)
+#define OMAP343X_PADCONF_ETK_D12	OMAP343X_PADCONF_ETK(14)
+#define OMAP343X_PADCONF_ETK_D13	OMAP343X_PADCONF_ETK(15)
+#define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
+#define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
+
+/* 34xx GENERAL_WKUP regist offsets */
+#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
+						0x008 + (i))
+#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
+#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
+#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
+#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
+#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
+
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
+#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP243X_MMC1_ACTIVE_OVERWRITE	(1 << 31)
+#define OMAP2_MMCSDIO2ADPCLKISEL	(1 << 6) /* MMC2 loop back clock */
+#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
+#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
+#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
+#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
+#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
+#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
+
+/* CONTROL_PBIAS_LITE bits */
+#define OMAP343X_PBIASLITESUPPLY_HIGH1	(1 << 15)
+#define OMAP343X_PBIASLITEVMODEERROR1	(1 << 11)
+#define OMAP343X_PBIASSPEEDCTRL1	(1 << 10)
+#define OMAP343X_PBIASLITEPWRDNZ1	(1 << 9)
+#define OMAP343X_PBIASLITEVMODE1	(1 << 8)
+#define OMAP343X_PBIASLITESUPPLY_HIGH0	(1 << 7)
+#define OMAP343X_PBIASLITEVMODEERROR0	(1 << 3)
+#define OMAP2_PBIASSPEEDCTRL0		(1 << 2)
+#define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
+#define OMAP2_PBIASLITEVMODE0		(1 << 0)
+
+/* CONTROL_PROG_IO1 bits */
+#define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
+
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT	0
+#define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE		(0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
+
+#define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
+#define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
+#define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
+
+/*
+ * CONTROL OMAP STATUS register to identify OMAP3 features
+ */
+#define OMAP3_CONTROL_OMAP_STATUS	0x044c
+
+#define OMAP3_SGX_SHIFT			13
+#define OMAP3_SGX_MASK			(3 << OMAP3_SGX_SHIFT)
+#define		FEAT_SGX_FULL		0
+#define		FEAT_SGX_HALF		1
+#define		FEAT_SGX_NONE		2
+
+#define OMAP3_IVA_SHIFT			12
+#define OMAP3_IVA_MASK			(1 << OMAP3_SGX_SHIFT)
+#define		FEAT_IVA		0
+#define		FEAT_IVA_NONE		1
+
+#define OMAP3_L2CACHE_SHIFT		10
+#define OMAP3_L2CACHE_MASK		(3 << OMAP3_L2CACHE_SHIFT)
+#define		FEAT_L2CACHE_NONE	0
+#define		FEAT_L2CACHE_64KB	1
+#define		FEAT_L2CACHE_128KB	2
+#define		FEAT_L2CACHE_256KB	3
+
+#define OMAP3_ISP_SHIFT			5
+#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define		FEAT_ISP		0
+#define		FEAT_ISP_NONE		1
+
+#define OMAP3_NEON_SHIFT		4
+#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define		FEAT_NEON		0
+#define		FEAT_NEON_NONE		1
+
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+		defined(CONFIG_ARCH_OMAP4)
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+
+extern void omap3_save_scratchpad_contents(void);
+extern void omap3_clear_scratchpad_contents(void);
+extern u32 *get_restore_pointer(void);
+extern u32 *get_es3_restore_pointer(void);
+extern u32 omap3_arm_context[128];
+extern void omap3_control_save_context(void);
+extern void omap3_control_restore_context(void);
+
+#else
+#define omap_ctrl_base_get()		0
+#define omap_ctrl_readb(x)		0
+#define omap_ctrl_readw(x)		0
+#define omap_ctrl_readl(x)		0
+#define omap_ctrl_writeb(x, y)		WARN_ON(1)
+#define omap_ctrl_writew(x, y)		WARN_ON(1)
+#define omap_ctrl_writel(x, y)		WARN_ON(1)
+#endif
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
new file mode 100644
index 0000000..2e17890
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -0,0 +1,513 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#include <linux/bitops.h>
+
+/*
+ * Omap device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define OMAP2_DEVICE_TYPE_TEST		0
+#define OMAP2_DEVICE_TYPE_EMU		1
+#define OMAP2_DEVICE_TYPE_SEC		2
+#define OMAP2_DEVICE_TYPE_GP		3
+#define OMAP2_DEVICE_TYPE_BAD		4
+
+int omap_type(void);
+
+struct omap_chip_id {
+	u8 oc;
+	u8 type;
+};
+
+#define OMAP_CHIP_INIT(x)	{ .oc = x }
+
+/*
+ * omap_rev bits:
+ * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
+ * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ */
+unsigned int omap_rev(void);
+
+/*
+ * Define CPU revision bits
+ *
+ * Verbose meaning of the revision bits may be different for a silicon
+ * family. This difference can be handled separately.
+ */
+#define OMAP_REVBITS_00		0x00
+#define OMAP_REVBITS_10		0x10
+#define OMAP_REVBITS_20		0x20
+#define OMAP_REVBITS_30		0x30
+#define OMAP_REVBITS_40		0x40
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730, OMAP850
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
+ * cpu_is_omap343x():	True for OMAP3430
+ */
+#define GET_OMAP_CLASS	(omap_rev() & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap343x()		0
+#define cpu_is_omap44xx()		0
+#define cpu_is_omap443x()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP850)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap24xx()		is_omap24xx()
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()		is_omap34xx()
+#  define cpu_is_omap343x()		is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap850():	True for OMAP850
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
+ * cpu_is_omap3430():	True for OMAP3430
+ * cpu_is_omap3505():	True for OMAP3505
+ * cpu_is_omap3517():	True for OMAP3517
+ */
+#define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(850, 0x0850)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3517, 0x3517)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap730()		0
+#define cpu_is_omap850()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap3503()		0
+#define cpu_is_omap3515()		0
+#define cpu_is_omap3525()		0
+#define cpu_is_omap3530()		0
+#define cpu_is_omap3505()		0
+#define cpu_is_omap3517()		0
+#define cpu_is_omap3430()		0
+#define cpu_is_omap3630()		0
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef  cpu_is_omap730
+# define cpu_is_omap730()		is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef  cpu_is_omap850
+# define cpu_is_omap850()		is_omap850()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# undef cpu_is_omap3503
+# undef cpu_is_omap3515
+# undef cpu_is_omap3525
+# undef cpu_is_omap3530
+# undef cpu_is_omap3505
+# undef cpu_is_omap3517
+# define cpu_is_omap3430()		is_omap3430()
+# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(!omap3_has_sgx()))
+# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
+						(omap3_has_iva()) &&	\
+						(!omap3_has_sgx()))
+# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
+						(omap3_has_sgx()) &&	\
+						(!omap3_has_iva()))
+# define cpu_is_omap3530()		(cpu_is_omap3430())
+# define cpu_is_omap3505()		is_omap3505()
+# define cpu_is_omap3517()		is_omap3517()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()		is_omap363x()
+#endif
+
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx()		1
+# define cpu_is_omap443x()		1
+# endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
+				cpu_is_omap44xx())
+
+/* Various silicon revisions for omap2 */
+#define OMAP242X_CLASS		0x24200024
+#define OMAP2420_REV_ES1_0	0x24200024
+#define OMAP2420_REV_ES2_0	0x24201024
+
+#define OMAP243X_CLASS		0x24300024
+#define OMAP2430_REV_ES1_0	0x24300024
+
+#define OMAP343X_CLASS		0x34300034
+#define OMAP3430_REV_ES1_0	0x34300034
+#define OMAP3430_REV_ES2_0	0x34301034
+#define OMAP3430_REV_ES2_1	0x34302034
+#define OMAP3430_REV_ES3_0	0x34303034
+#define OMAP3430_REV_ES3_1	0x34304034
+
+#define OMAP3630_REV_ES1_0	0x36300034
+
+#define OMAP35XX_CLASS		0x35000034
+#define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 12))
+#define OMAP3515_REV(v)		(OMAP35XX_CLASS | (0x3515 << 16) | (v << 12))
+#define OMAP3525_REV(v)		(OMAP35XX_CLASS | (0x3525 << 16) | (v << 12))
+#define OMAP3530_REV(v)		(OMAP35XX_CLASS | (0x3530 << 16) | (v << 12))
+#define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 12))
+#define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 12))
+
+#define OMAP443X_CLASS		0x44300034
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420		(1 << 0)
+#define CHIP_IS_OMAP2430		(1 << 1)
+#define CHIP_IS_OMAP3430		(1 << 2)
+#define CHIP_IS_OMAP3430ES1		(1 << 3)
+#define CHIP_IS_OMAP3430ES2		(1 << 4)
+#define CHIP_IS_OMAP3430ES3_0		(1 << 5)
+#define CHIP_IS_OMAP3430ES3_1		(1 << 6)
+#define CHIP_IS_OMAP3630ES1		(1 << 7)
+
+#define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+/*
+ * "GE" here represents "greater than or equal to" in terms of ES
+ * levels.  So CHIP_GE_OMAP3430ES2 is intended to match all OMAP3430
+ * chips at ES2 and beyond, but not, for example, any OMAP lines after
+ * OMAP3.
+ */
+#define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
+					 CHIP_IS_OMAP3430ES3_0 | \
+					 CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
+#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
+
+
+int omap_chip_is(struct omap_chip_id oci);
+void omap2_check_revision(void);
+
+/*
+ * Runtime detection of OMAP3 features
+ */
+extern u32 omap3_features;
+
+#define OMAP3_HAS_L2CACHE		BIT(0)
+#define OMAP3_HAS_IVA			BIT(1)
+#define OMAP3_HAS_SGX			BIT(2)
+#define OMAP3_HAS_NEON			BIT(3)
+#define OMAP3_HAS_ISP			BIT(4)
+
+#define OMAP3_HAS_FEATURE(feat,flag)			\
+static inline unsigned int omap3_has_ ##feat(void)	\
+{							\
+	return (omap3_features & OMAP3_HAS_ ##flag);	\
+}							\
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
new file mode 100644
index 0000000..1c017b2
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -0,0 +1,680 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE			(0xfffed800)
+
+#define OMAP1_DMA_GCR			0x400
+#define OMAP1_DMA_GSCR			0x404
+#define OMAP1_DMA_GRST			0x408
+#define OMAP1_DMA_HW_ID			0x442
+#define OMAP1_DMA_PCH2_ID		0x444
+#define OMAP1_DMA_PCH0_ID		0x446
+#define OMAP1_DMA_PCH1_ID		0x448
+#define OMAP1_DMA_PCHG_ID		0x44a
+#define OMAP1_DMA_PCHD_ID		0x44c
+#define OMAP1_DMA_CAPS_0_U		0x44e
+#define OMAP1_DMA_CAPS_0_L		0x450
+#define OMAP1_DMA_CAPS_1_U		0x452
+#define OMAP1_DMA_CAPS_1_L		0x454
+#define OMAP1_DMA_CAPS_2		0x456
+#define OMAP1_DMA_CAPS_3		0x458
+#define OMAP1_DMA_CAPS_4		0x45a
+#define OMAP1_DMA_PCH2_SR		0x460
+#define OMAP1_DMA_PCH0_SR		0x480
+#define OMAP1_DMA_PCH1_SR		0x482
+#define OMAP1_DMA_PCHD_SR		0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION		0x00
+#define OMAP_DMA4_GCR			0x78
+#define OMAP_DMA4_IRQSTATUS_L0		0x08
+#define OMAP_DMA4_IRQSTATUS_L1		0x0c
+#define OMAP_DMA4_IRQSTATUS_L2		0x10
+#define OMAP_DMA4_IRQSTATUS_L3		0x14
+#define OMAP_DMA4_IRQENABLE_L0		0x18
+#define OMAP_DMA4_IRQENABLE_L1		0x1c
+#define OMAP_DMA4_IRQENABLE_L2		0x20
+#define OMAP_DMA4_IRQENABLE_L3		0x24
+#define OMAP_DMA4_SYSSTATUS		0x28
+#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
+#define OMAP_DMA4_CAPS_0		0x64
+#define OMAP_DMA4_CAPS_2		0x6c
+#define OMAP_DMA4_CAPS_3		0x70
+#define OMAP_DMA4_CAPS_4		0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
+#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
+#define OMAP1_DMA_CCEN(n)		0
+#define OMAP1_DMA_CCFN(n)		0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
+
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION		0
+#define OMAP1_DMA_IRQSTATUS_L0		0
+#define OMAP1_DMA_IRQENABLE_L0		0
+#define OMAP1_DMA_OCP_SYSCONFIG		0
+#define OMAP_DMA4_HW_ID			0
+#define OMAP_DMA4_CAPS_0_L		0
+#define OMAP_DMA4_CAPS_0_U		0
+#define OMAP_DMA4_CAPS_1_L		0
+#define OMAP_DMA4_CAPS_1_U		0
+#define OMAP_DMA4_GSCR			0
+#define OMAP_DMA4_CPC(n)		0
+
+#define OMAP_DMA4_LCH_CTRL(n)		0
+#define OMAP_DMA4_COLOR_L(n)		0
+#define OMAP_DMA4_COLOR_U(n)		0
+#define OMAP_DMA4_CCR2(n)		0
+#define OMAP1_DMA_CSSA(n)		0
+#define OMAP1_DMA_CDSA(n)		0
+#define OMAP_DMA4_CSSA_L(n)		0
+#define OMAP_DMA4_CSSA_U(n)		0
+#define OMAP_DMA4_CDSA_L(n)		0
+#define OMAP_DMA4_CDSA_U(n)		0
+#define OMAP1_DMA_COLOR(n)		0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
+
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_DROP_IRQ		(1 << 1)
+#define OMAP_DMA_HALF_IRQ		(1 << 2)
+#define OMAP_DMA_FRAME_IRQ		(1 << 3)
+#define OMAP_DMA_LAST_IRQ		(1 << 4)
+#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8		0x00
+#define OMAP_DMA_DATA_TYPE_S16		0x01
+#define OMAP_DMA_DATA_TYPE_S32		0x02
+
+#define OMAP_DMA_SYNC_ELEMENT		0x00
+#define OMAP_DMA_SYNC_FRAME		0x01
+#define OMAP_DMA_SYNC_BLOCK		0x02
+#define OMAP_DMA_SYNC_PACKET		0x03
+
+#define OMAP_DMA_SRC_SYNC		0x01
+#define OMAP_DMA_DST_SYNC		0x00
+
+#define OMAP_DMA_PORT_EMIFF		0x00
+#define OMAP_DMA_PORT_EMIFS		0x01
+#define OMAP_DMA_PORT_OCP_T1		0x02
+#define OMAP_DMA_PORT_TIPB		0x03
+#define OMAP_DMA_PORT_OCP_T2		0x04
+#define OMAP_DMA_PORT_MPUI		0x05
+
+#define OMAP_DMA_AMODE_CONSTANT		0x00
+#define OMAP_DMA_AMODE_POST_INC		0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH		0x10
+#define DMA_DEFAULT_ARB_RATE		0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
+#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75		(0x01 << 14)
+#define DMA_THREAD_FIFO_25		(0x02 << 14)
+#define DMA_THREAD_FIFO_50		(0x03 << 14)
+
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK		(3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK	(3 << 8)
+#define DMA_SYSCONFIG_EMUFREE			(1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK		(3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET			(1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE			(1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)		((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)		((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE			0x2
+#define DMA_IDLEMODE_NO_IDLE			0x1
+#define DMA_IDLEMODE_FORCE_IDLE			0x0
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN		0x1
+#define OMAP_DMA_DYNAMIC_CHAIN		0x2
+#define OMAP_DMA_CHAIN_ACTIVE		0x1
+#define OMAP_DMA_CHAIN_INACTIVE		0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH		0x1
+#define DMA_CH_PRIO_LOW			0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+	OMAP_DMA_DATA_BURST_DIS = 0,
+	OMAP_DMA_DATA_BURST_4,
+	OMAP_DMA_DATA_BURST_8,
+	OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+	OMAP_DMA_LITTLE_ENDIAN = 0,
+	OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+	OMAP_DMA_COLOR_DIS = 0,
+	OMAP_DMA_CONSTANT_FILL,
+	OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+	OMAP_DMA_WRITE_NON_POSTED = 0,
+	OMAP_DMA_WRITE_POSTED,
+	OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+	OMAP_DMA_LCH_2D = 0,
+	OMAP_DMA_LCH_G,
+	OMAP_DMA_LCH_P,
+	OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long src_start;	/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long dst_start;	/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is
+					synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+
+	unsigned char read_prio;/* read priority */
+	unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+					 int elem_count, int frame_count,
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+				    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+					enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+					 enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+				       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+				 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+				  void (*callback) (int lch, u16 ch_status,
+						    void *data),
+				  int *chain_id, int no_of_chans,
+				  int chain_mode,
+				  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+				     int dest_start, int elem_count,
+				     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+					struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/dmtimer.h
rename to arch/arm/plat-omap/include/plat/dmtimer.h
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/dsp_common.h
rename to arch/arm/plat-omap/include/plat/dsp_common.h
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/fpga.h
rename to arch/arm/plat-omap/include/plat/fpga.h
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/gpio-switch.h
rename to arch/arm/plat-omap/include/plat/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
new file mode 100644
index 0000000..de7c547
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <linux/io.h>
+#include <mach/irqs.h>
+
+#define OMAP1_MPUIO_BASE			0xfffb5000
+
+#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
+
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x02
+#define OMAP_MPUIO_IO_CNTL		0x04
+#define OMAP_MPUIO_KBR_LATCH		0x08
+#define OMAP_MPUIO_KBC			0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
+#define OMAP_MPUIO_KBD_INT		0x10
+#define OMAP_MPUIO_GPIO_INT		0x12
+#define OMAP_MPUIO_KBD_MASKIT		0x14
+#define OMAP_MPUIO_GPIO_MASKIT		0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
+#define OMAP_MPUIO_LATCH		0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x04
+#define OMAP_MPUIO_IO_CNTL		0x08
+#define OMAP_MPUIO_KBR_LATCH		0x10
+#define OMAP_MPUIO_KBC			0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
+#define OMAP_MPUIO_KBD_INT		0x20
+#define OMAP_MPUIO_GPIO_INT		0x24
+#define OMAP_MPUIO_KBD_MASKIT		0x28
+#define OMAP_MPUIO_GPIO_MASKIT		0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
+#define OMAP_MPUIO_LATCH		0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS		6
+
+#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
+				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+				 IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void);	/* Call from board init only */
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+extern void omap_gpio_save_context(void);
+extern void omap_gpio_restore_context(void);
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	int tmp;
+
+	/* omap1 SOC mpuio */
+	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+
+	/* SOC gpio */
+	tmp = irq - IH_GPIO_BASE;
+	if (tmp < OMAP_MAX_GPIO_LINES)
+		return tmp;
+
+	/* we don't supply reverse mappings for non-SOC gpios */
+	return -EIO;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/gpmc-smc91x.h
rename to arch/arm/plat-omap/include/plat/gpmc-smc91x.h
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
new file mode 100644
index 0000000..696e0ca
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -0,0 +1,115 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM		8
+
+#define GPMC_CS_CONFIG1		0x00
+#define GPMC_CS_CONFIG2		0x04
+#define GPMC_CS_CONFIG3		0x08
+#define GPMC_CS_CONFIG4		0x0c
+#define GPMC_CS_CONFIG5		0x10
+#define GPMC_CS_CONFIG6		0x14
+#define GPMC_CS_CONFIG7		0x18
+#define GPMC_CS_NAND_COMMAND	0x1c
+#define GPMC_CS_NAND_ADDRESS	0x20
+#define GPMC_CS_NAND_DATA	0x24
+
+#define GPMC_CONFIG		0x50
+#define GPMC_STATUS		0x54
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID		(1 << 6)
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode */
+	u16 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u16 cs_on;		/* Assertion time */
+	u16 cs_rd_off;		/* Read deassertion time */
+	u16 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u16 adv_on;		/* Assertion time */
+	u16 adv_rd_off;		/* Read deassertion time */
+	u16 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u16 we_on;		/* WE assertion time */
+	u16 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u16 oe_on;		/* OE assertion time */
+	u16 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u16 page_burst_access;	/* Multiple access word delay */
+	u16 access;		/* Start-cycle to first data valid delay */
+	u16 rd_cycle;		/* Total read cycle time */
+	u16 wr_cycle;		/* Total write cycle time */
+
+	/* The following are only on OMAP3430 */
+	u16 wr_access;		/* WRACCESSTIME */
+	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
+extern unsigned long gpmc_get_fclk_period(void);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_cs_set_reserved(int cs, int reserved);
+extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int dma_mode,
+					unsigned int u32_count, int is_write);
+extern void gpmc_prefetch_reset(void);
+extern int gpmc_prefetch_status(void);
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+extern void __init gpmc_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
new file mode 100644
index 0000000..d5b26ad
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+#endif
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/hwa742.h
rename to arch/arm/plat-omap/include/plat/hwa742.h
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
new file mode 100644
index 0000000..7e5319f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -0,0 +1,287 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_L3_IO_OFFSET	0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET	0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET		0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_243X_SIZE		SZ_1M
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SMS_SIZE	SZ_1M
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_VIRT	0xe0000000
+#define DSP_MEM_24XX_SIZE	0x28000
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_VIRT	0xe1000000
+#define DSP_IPI_24XX_SIZE	SZ_4K
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT	0xe2000000
+#define DSP_MMU_24XX_SIZE	SZ_4K
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE	/* 0x48300000 --> 0xfa300000 */
+#define L4_WK_34XX_VIRT		(L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE	SZ_8M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_44XX_SIZE		SZ_1M
+
+#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_44XX_SIZE		SZ_4M
+
+
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE	/* 0x4a300000 --> 0xfc300000 */
+#define L4_WK_44XX_VIRT		(L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_44XX_SIZE		SZ_1M
+
+#define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
+						/* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_44XX_SIZE	SZ_4M
+
+#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE	SZ_1M
+
+#define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE	SZ_8M
+
+#define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
+						/* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
+#define OMAP44XX_GPMC_SIZE	SZ_1M
+
+
+#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
+						/* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE	SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
+						/* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF2_SIZE	SZ_1M
+
+#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
+						/* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_VIRT	(OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_DMM_SIZE	SZ_1M
+/*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef __ASSEMBLER__
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+struct omap_sdrc_params;
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1);
+
+#define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
+#define __arch_iounmap(v)	omap_iounmap(v)
+
+void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
+void omap_iounmap(volatile void __iomem *addr);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
new file mode 100644
index 0000000..0752af9
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -0,0 +1,168 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+	u32 da;
+	u32 pa;
+	u32 pgsz, prsvd, valid;
+	union {
+		u16 ap;
+		struct {
+			u32 endian, elsz, mixed;
+		};
+	};
+};
+
+struct iommu {
+	const char	*name;
+	struct module	*owner;
+	struct clk	*clk;
+	void __iomem	*regbase;
+	struct device	*dev;
+
+	unsigned int	refcount;
+	struct mutex	iommu_lock;	/* global for this whole object */
+
+	/*
+	 * We don't change iopgd for a situation like pgd for a task,
+	 * but share it globally for each iommu.
+	 */
+	u32		*iopgd;
+	spinlock_t	page_table_lock; /* protect iopgd */
+
+	int		nr_tlb_entries;
+
+	struct list_head	mmap;
+	struct mutex		mmap_lock; /* protect mmap */
+
+	int (*isr)(struct iommu *obj);
+
+	void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+	union {
+		struct {
+			u16 cam_l;
+			u16 cam_h;
+		};
+		u32 cam;
+	};
+	union {
+		struct {
+			u16 ram_l;
+			u16 ram_h;
+		};
+		u32 ram;
+	};
+};
+
+struct iotlb_lock {
+	short base;
+	short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+	unsigned long	version;
+
+	int (*enable)(struct iommu *obj);
+	void (*disable)(struct iommu *obj);
+	u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+	void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+	void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+	struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+	int (*cr_valid)(struct cr_regs *cr);
+	u32 (*cr_to_virt)(struct cr_regs *cr);
+	void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+	ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+	u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+	void (*save_ctx)(struct iommu *obj);
+	void (*restore_ctx)(struct iommu *obj);
+	ssize_t (*dump_ctx)(struct iommu *obj, char *buf, ssize_t len);
+};
+
+struct iommu_platform_data {
+	const char *name;
+	const char *clk_name;
+	const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <plat/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)			\
+	(((bytes) >= SZ_16M) ? SZ_16M :		\
+	 ((bytes) >= SZ_1M)  ? SZ_1M  :		\
+	 ((bytes) >= SZ_64K) ? SZ_64K :		\
+	 ((bytes) >= SZ_4K)  ? SZ_4K  :	0)
+
+#define bytes_to_iopgsz(bytes)				\
+	(((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :	\
+	 ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :	\
+	 ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :	\
+	 ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)				\
+	(((iopgsz) == MMU_CAM_PGSZ_16M)	? SZ_16M :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_1M)	? SZ_1M  :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_64K)	? SZ_64K :	\
+	 ((iopgsz) == MMU_CAM_PGSZ_4K)	? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+				int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf, ssize_t len);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/iommu2.h
rename to arch/arm/plat-omap/include/plat/iommu2.h
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/iovmm.h
rename to arch/arm/plat-omap/include/plat/iovmm.h
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/plat/irda.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/irda.h
rename to arch/arm/plat-omap/include/plat/irda.h
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
new file mode 100644
index 0000000..ce5dd2d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -0,0 +1,492 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_DMA_LCD		25
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	0
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_SOSSI_MATCH		(19 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+#define INT_1610_SHA1MD5	(91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_CAM_IRQ	24
+#define INT_24XX_DSS_IRQ	25
+#define INT_24XX_MAIL_U0_MPU	26
+#define INT_24XX_DSP_UMA	27
+#define INT_24XX_DSP_MMU	28
+#define INT_24XX_GPIO_BANK1	29
+#define INT_24XX_GPIO_BANK2	30
+#define INT_24XX_GPIO_BANK3	31
+#define INT_24XX_GPIO_BANK4	32
+#define INT_24XX_GPIO_BANK5	33
+#define INT_24XX_MAIL_U3_MPU	34
+#define INT_24XX_GPTIMER1	37
+#define INT_24XX_GPTIMER2	38
+#define INT_24XX_GPTIMER3	39
+#define INT_24XX_GPTIMER4	40
+#define INT_24XX_GPTIMER5	41
+#define INT_24XX_GPTIMER6	42
+#define INT_24XX_GPTIMER7	43
+#define INT_24XX_GPTIMER8	44
+#define INT_24XX_GPTIMER9	45
+#define INT_24XX_GPTIMER10	46
+#define INT_24XX_GPTIMER11	47
+#define INT_24XX_GPTIMER12	48
+#define INT_24XX_SHA1MD5	51
+#define INT_24XX_MCBSP4_IRQ_TX	54
+#define INT_24XX_MCBSP4_IRQ_RX	55
+#define INT_24XX_I2C1_IRQ	56
+#define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_HDQ_IRQ	58
+#define INT_24XX_MCBSP1_IRQ_TX	59
+#define INT_24XX_MCBSP1_IRQ_RX	60
+#define INT_24XX_MCBSP2_IRQ_TX	62
+#define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_SPI1_IRQ	65
+#define INT_24XX_SPI2_IRQ	66
+#define INT_24XX_UART1_IRQ	72
+#define INT_24XX_UART2_IRQ	73
+#define INT_24XX_UART3_IRQ	74
+#define INT_24XX_USB_IRQ_GEN	75
+#define INT_24XX_USB_IRQ_NISO	76
+#define INT_24XX_USB_IRQ_ISO	77
+#define INT_24XX_USB_IRQ_HGEN	78
+#define INT_24XX_USB_IRQ_HSOF	79
+#define INT_24XX_USB_IRQ_OTG	80
+#define INT_24XX_MCBSP5_IRQ_TX	81
+#define INT_24XX_MCBSP5_IRQ_RX	82
+#define INT_24XX_MMC_IRQ	83
+#define INT_24XX_MMC2_IRQ	86
+#define INT_24XX_MCBSP3_IRQ_TX	89
+#define INT_24XX_MCBSP3_IRQ_RX	90
+#define INT_24XX_SPI3_IRQ	91
+
+#define INT_243X_MCBSP2_IRQ	16
+#define INT_243X_MCBSP3_IRQ	17
+#define INT_243X_MCBSP4_IRQ	18
+#define INT_243X_MCBSP5_IRQ	19
+#define INT_243X_MCBSP1_IRQ	64
+#define INT_243X_HS_USB_MC	92
+#define INT_243X_HS_USB_DMA	93
+#define INT_243X_CARKIT_IRQ	94
+
+#define INT_34XX_BENCH_MPU_EMUL	3
+#define INT_34XX_ST_MCBSP2_IRQ	4
+#define INT_34XX_ST_MCBSP3_IRQ	5
+#define INT_34XX_SSM_ABORT_IRQ	6
+#define INT_34XX_SYS_NIRQ	7
+#define INT_34XX_D2D_FW_IRQ	8
+#define INT_34XX_PRCM_MPU_IRQ	11
+#define INT_34XX_MCBSP1_IRQ	16
+#define INT_34XX_MCBSP2_IRQ	17
+#define INT_34XX_MCBSP3_IRQ	22
+#define INT_34XX_MCBSP4_IRQ	23
+#define INT_34XX_CAM_IRQ	24
+#define INT_34XX_MCBSP5_IRQ	27
+#define INT_34XX_GPIO_BANK1	29
+#define INT_34XX_GPIO_BANK2	30
+#define INT_34XX_GPIO_BANK3	31
+#define INT_34XX_GPIO_BANK4	32
+#define INT_34XX_GPIO_BANK5	33
+#define INT_34XX_GPIO_BANK6	34
+#define INT_34XX_USIM_IRQ	35
+#define INT_34XX_WDT3_IRQ	36
+#define INT_34XX_SPI4_IRQ	48
+#define INT_34XX_SHA1MD52_IRQ	49
+#define INT_34XX_FPKA_READY_IRQ	50
+#define INT_34XX_SHA1MD51_IRQ	51
+#define INT_34XX_RNG_IRQ	52
+#define INT_34XX_I2C3_IRQ	61
+#define INT_34XX_FPKA_ERROR_IRQ	64
+#define INT_34XX_PBIAS_IRQ	75
+#define INT_34XX_OHCI_IRQ	76
+#define INT_34XX_EHCI_IRQ	77
+#define INT_34XX_TLL_IRQ	78
+#define INT_34XX_PARTHASH_IRQ	79
+#define INT_34XX_MMC3_IRQ	94
+#define INT_34XX_GPT12_IRQ	95
+
+#define	INT_34XX_BENCH_MPU_EMUL	3
+
+
+#define IRQ_GIC_START		32
+#define INT_44XX_LOCALTIMER_IRQ	29
+#define INT_44XX_LOCALWDT_IRQ	30
+
+#define INT_44XX_BENCH_MPU_EMUL	(3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ	(6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ	(7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ	(8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ	(11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0	(12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1	(13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2	(14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3	(15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ	(24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ	(25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU	(26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU	(28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1	(37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2	(38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3	(39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4	(40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5	(41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6	(42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7	(43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8	(44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9	(45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10	(46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11	(47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12	(95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5	(51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ	(56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ	(57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ	(58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ	(65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ	(66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0	(67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1	(68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ	(71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ	(72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ	(73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ	(74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ	(70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO	(76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO	(77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN	(78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF	(79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG	(80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX	(81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX	(82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ	(83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ	(86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX	(89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX	(90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ	(91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ	(69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ	(16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ	(17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ	(22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ	(23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ	(27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC	(92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA	(93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1	(29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2	(30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3	(31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4	(32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5	(33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6	(34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ	(35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ	(36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ	(48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ	(49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ	(50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ	(51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ	(52 + IRQ_GIC_START)
+#define INT_44XX_MMC5_IRQ	(59 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ	(61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ	(64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ	(75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ	(76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ	(77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ	(78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ	(79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ	(94 + IRQ_GIC_START)
+#define INT_44XX_MMC4_IRQ	(96 + IRQ_GIC_START)
+
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef	CONFIG_TWL4030_CORE
+#define	TWL4030_BASE_NR_IRQS	8
+#define	TWL4030_PWR_NR_IRQS	8
+#else
+#define	TWL4030_BASE_NR_IRQS	0
+#define	TWL4030_PWR_NR_IRQS	0
+#endif
+#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
+#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
+#ifdef	CONFIG_GPIO_TWL4030
+#define TWL4030_GPIO_NR_IRQS	18
+#else
+#define	TWL4030_GPIO_NR_IRQS	0
+#endif
+#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS			TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/keypad.h
rename to arch/arm/plat-omap/include/plat/keypad.h
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/lcd_mipid.h
rename to arch/arm/plat-omap/include/plat/lcd_mipid.h
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/plat/led.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/led.h
rename to arch/arm/plat-omap/include/plat/led.h
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
new file mode 100644
index 0000000..729166b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -0,0 +1,111 @@
+/* mailbox.h */
+
+#ifndef MAILBOX_H
+#define MAILBOX_H
+
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+
+typedef u32 mbox_msg_t;
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+typedef int __bitwise omap_mbox_type_t;
+#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
+#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
+
+struct omap_mbox_ops {
+	omap_mbox_type_t	type;
+	int		(*startup)(struct omap_mbox *mbox);
+	void		(*shutdown)(struct omap_mbox *mbox);
+	/* fifo */
+	mbox_msg_t	(*fifo_read)(struct omap_mbox *mbox);
+	void		(*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
+	int		(*fifo_empty)(struct omap_mbox *mbox);
+	int		(*fifo_full)(struct omap_mbox *mbox);
+	/* irq */
+	void		(*enable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
+	void		(*disable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
+	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	/* ctx */
+	void		(*save_ctx)(struct omap_mbox *mbox);
+	void		(*restore_ctx)(struct omap_mbox *mbox);
+};
+
+struct omap_mbox_queue {
+	spinlock_t		lock;
+	struct request_queue	*queue;
+	struct work_struct	work;
+	struct tasklet_struct	tasklet;
+	int	(*callback)(void *);
+	struct omap_mbox	*mbox;
+};
+
+struct omap_mbox {
+	char			*name;
+	unsigned int		irq;
+
+	struct omap_mbox_queue	*txq, *rxq;
+
+	struct omap_mbox_ops	*ops;
+
+	mbox_msg_t		seq_snd, seq_rcv;
+
+	struct device		*dev;
+
+	struct omap_mbox	*next;
+	void			*priv;
+
+	void			(*err_notify)(void);
+};
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
+void omap_mbox_init_seq(struct omap_mbox *);
+
+struct omap_mbox *omap_mbox_get(const char *);
+void omap_mbox_put(struct omap_mbox *);
+
+int omap_mbox_register(struct device *parent, struct omap_mbox *);
+int omap_mbox_unregister(struct omap_mbox *);
+
+static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+	if (!mbox->ops->save_ctx) {
+		dev_err(mbox->dev, "%s:\tno save\n", __func__);
+		return;
+	}
+
+	mbox->ops->save_ctx(mbox);
+}
+
+static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+	if (!mbox->ops->restore_ctx) {
+		dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+		return;
+	}
+
+	mbox->ops->restore_ctx(mbox);
+}
+
+static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
+					omap_mbox_irq_t irq)
+{
+	mbox->ops->enable_irq(mbox, irq);
+}
+
+static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
+					 omap_mbox_irq_t irq)
+{
+	mbox->ops->disable_irq(mbox, irq);
+}
+
+#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
new file mode 100644
index 0000000..4f22e5b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -0,0 +1,462 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <plat/clock.h>
+
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
+#define OMAP24XX_MCBSP1_BASE	0x48074000
+#define OMAP24XX_MCBSP2_BASE	0x48076000
+#define OMAP2430_MCBSP3_BASE	0x4808c000
+#define OMAP2430_MCBSP4_BASE	0x4808e000
+#define OMAP2430_MCBSP5_BASE	0x48096000
+
+#define OMAP34XX_MCBSP1_BASE	0x48074000
+#define OMAP34XX_MCBSP2_BASE	0x49022000
+#define OMAP34XX_MCBSP3_BASE	0x49024000
+#define OMAP34XX_MCBSP4_BASE	0x49026000
+#define OMAP34XX_MCBSP5_BASE	0x48096000
+
+#define OMAP44XX_MCBSP1_BASE	0x49022000
+#define OMAP44XX_MCBSP2_BASE	0x49024000
+#define OMAP44XX_MCBSP3_BASE	0x49026000
+#define OMAP44XX_MCBSP4_BASE	0x48074000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x02
+#define OMAP_MCBSP_REG_DXR2	0x04
+#define OMAP_MCBSP_REG_DXR1	0x06
+#define OMAP_MCBSP_REG_SPCR2	0x08
+#define OMAP_MCBSP_REG_SPCR1	0x0a
+#define OMAP_MCBSP_REG_RCR2	0x0c
+#define OMAP_MCBSP_REG_RCR1	0x0e
+#define OMAP_MCBSP_REG_XCR2	0x10
+#define OMAP_MCBSP_REG_XCR1	0x12
+#define OMAP_MCBSP_REG_SRGR2	0x14
+#define OMAP_MCBSP_REG_SRGR1	0x16
+#define OMAP_MCBSP_REG_MCR2	0x18
+#define OMAP_MCBSP_REG_MCR1	0x1a
+#define OMAP_MCBSP_REG_RCERA	0x1c
+#define OMAP_MCBSP_REG_RCERB	0x1e
+#define OMAP_MCBSP_REG_XCERA	0x20
+#define OMAP_MCBSP_REG_XCERB	0x22
+#define OMAP_MCBSP_REG_PCR0	0x24
+#define OMAP_MCBSP_REG_RCERC	0x26
+#define OMAP_MCBSP_REG_RCERD	0x28
+#define OMAP_MCBSP_REG_XCERC	0x2A
+#define OMAP_MCBSP_REG_XCERD	0x2C
+#define OMAP_MCBSP_REG_RCERE	0x2E
+#define OMAP_MCBSP_REG_RCERF	0x30
+#define OMAP_MCBSP_REG_XCERE	0x32
+#define OMAP_MCBSP_REG_XCERF	0x34
+#define OMAP_MCBSP_REG_RCERG	0x36
+#define OMAP_MCBSP_REG_RCERH	0x38
+#define OMAP_MCBSP_REG_XCERG	0x3A
+#define OMAP_MCBSP_REG_XCERH	0x3C
+
+/* Dummy defines, these are not available on omap1 */
+#define OMAP_MCBSP_REG_XCCR	0x00
+#define OMAP_MCBSP_REG_RCCR	0x00
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP1
+#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+	defined(CONFIG_ARCH_OMAP4)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x04
+#define OMAP_MCBSP_REG_DXR2	0x08
+#define OMAP_MCBSP_REG_DXR1	0x0C
+#define OMAP_MCBSP_REG_DRR	0x00
+#define OMAP_MCBSP_REG_DXR	0x08
+#define OMAP_MCBSP_REG_SPCR2	0x10
+#define OMAP_MCBSP_REG_SPCR1	0x14
+#define OMAP_MCBSP_REG_RCR2	0x18
+#define OMAP_MCBSP_REG_RCR1	0x1C
+#define OMAP_MCBSP_REG_XCR2	0x20
+#define OMAP_MCBSP_REG_XCR1	0x24
+#define OMAP_MCBSP_REG_SRGR2	0x28
+#define OMAP_MCBSP_REG_SRGR1	0x2C
+#define OMAP_MCBSP_REG_MCR2	0x30
+#define OMAP_MCBSP_REG_MCR1	0x34
+#define OMAP_MCBSP_REG_RCERA	0x38
+#define OMAP_MCBSP_REG_RCERB	0x3C
+#define OMAP_MCBSP_REG_XCERA	0x40
+#define OMAP_MCBSP_REG_XCERB	0x44
+#define OMAP_MCBSP_REG_PCR0	0x48
+#define OMAP_MCBSP_REG_RCERC	0x4C
+#define OMAP_MCBSP_REG_RCERD	0x50
+#define OMAP_MCBSP_REG_XCERC	0x54
+#define OMAP_MCBSP_REG_XCERD	0x58
+#define OMAP_MCBSP_REG_RCERE	0x5C
+#define OMAP_MCBSP_REG_RCERF	0x60
+#define OMAP_MCBSP_REG_XCERE	0x64
+#define OMAP_MCBSP_REG_XCERF	0x68
+#define OMAP_MCBSP_REG_RCERG	0x6C
+#define OMAP_MCBSP_REG_RCERH	0x70
+#define OMAP_MCBSP_REG_XCERG	0x74
+#define OMAP_MCBSP_REG_XCERH	0x78
+#define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_THRSH2	0x90
+#define OMAP_MCBSP_REG_THRSH1	0x94
+#define OMAP_MCBSP_REG_IRQST	0xA0
+#define OMAP_MCBSP_REG_IRQEN	0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN	0xA8
+#define OMAP_MCBSP_REG_XCCR	0xAC
+#define OMAP_MCBSP_REG_RCCR	0xB0
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP2
+#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST			0x0001
+#define RRDY			0x0002
+#define RFULL			0x0004
+#define RSYNC_ERR		0x0008
+#define RINTM(value)		((value)<<4)	/* bits 4:5 */
+#define ABIS			0x0040
+#define DXENA			0x0080
+#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
+#define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define ALB			0x8000
+#define DLB			0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST		0x0001
+#define XRDY		0x0002
+#define XEMPTY		0x0004
+#define XSYNC_ERR	0x0008
+#define XINTM(value)	((value)<<4)		/* bits 4:5 */
+#define GRST		0x0040
+#define FRST		0x0080
+#define SOFT		0x0100
+#define FREE		0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP		0x0001
+#define CLKXP		0x0002
+#define FSRP		0x0004
+#define FSXP		0x0008
+#define DR_STAT		0x0010
+#define DX_STAT		0x0020
+#define CLKS_STAT	0x0040
+#define SCLKME		0x0080
+#define CLKRM		0x0100
+#define CLKXM		0x0200
+#define FSRM		0x0400
+#define FSXM		0x0800
+#define RIOEN		0x1000
+#define XIOEN		0x2000
+#define IDLE_EN		0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)		(value)		/* Bits 0:1 */
+#define RFIG			0x0004
+#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define RPHASE			0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)		(value)		/* Bits 0:1 */
+#define XFIG			0x0004
+#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define XPHASE			0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)		(value)		/* Bits 0:7 */
+#define FWID(value)		((value)<<8)	/* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)		(value)		/* Bits 0:11 */
+#define FSGM			0x1000
+#define CLKSM			0x2000
+#define CLKSP			0x4000
+#define GSYNC			0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM			0x0001
+#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)		(value)		/* Bits 0:1 */
+#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+/*********************** McBSP XCCR bit definitions *************************/
+#define EXTCLKGATE		0x8000
+#define PPCONNECT		0x4000
+#define DXENDLY(value)		((value)<<12)	/* Bits 12:13 */
+#define XFULL_CYCLE		0x0800
+#define DILB			0x0020
+#define XDMAEN			0x0008
+#define XDISABLE		0x0001
+
+/********************** McBSP RCCR bit definitions *************************/
+#define RFULL_CYCLE		0x0800
+#define RDMAEN			0x0008
+#define RDISABLE		0x0001
+
+/********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value)	((value)<<8)
+#define SIDLEMODE(value)	((value)<<3)
+#define ENAWAKEUP		0x0004
+#define SOFTRST			0x0002
+
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT		0
+#define MCBSP_DMA_MODE_THRESHOLD	1
+#define MCBSP_DMA_MODE_FRAME		2
+
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN		0x4000
+#define XRDYEN			0x0400
+#define XEOFEN			0x0200
+#define XFSXEN			0x0100
+#define XSYNCERREN		0x0080
+#define RRDYEN			0x0008
+#define REOFEN			0x0004
+#define RFSREN			0x0002
+#define RSYNCERREN		0x0001
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+	u16 spcr2;
+	u16 spcr1;
+	u16 rcr2;
+	u16 rcr1;
+	u16 xcr2;
+	u16 xcr1;
+	u16 srgr2;
+	u16 srgr1;
+	u16 mcr2;
+	u16 mcr1;
+	u16 pcr0;
+	u16 rcerc;
+	u16 rcerd;
+	u16 xcerc;
+	u16 xcerd;
+	u16 rcere;
+	u16 rcerf;
+	u16 xcere;
+	u16 xcerf;
+	u16 rcerg;
+	u16 rcerh;
+	u16 xcerg;
+	u16 xcerh;
+	u16 xccr;
+	u16 rccr;
+};
+
+typedef enum {
+	OMAP_MCBSP1 = 0,
+	OMAP_MCBSP2,
+	OMAP_MCBSP3,
+	OMAP_MCBSP4,
+	OMAP_MCBSP5
+} omap_mcbsp_id;
+
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
+typedef enum {
+	OMAP_MCBSP_WORD_8 = 0,
+	OMAP_MCBSP_WORD_12,
+	OMAP_MCBSP_WORD_16,
+	OMAP_MCBSP_WORD_20,
+	OMAP_MCBSP_WORD_24,
+	OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+	OMAP_MCBSP_CLK_RISING = 0,
+	OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+	OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+	OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+	OMAP_MCBSP_SPI_MASTER = 0,
+	OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+	omap_mcbsp_spi_mode		spi_mode;
+	omap_mcbsp_clk_polarity		rx_clock_polarity;
+	omap_mcbsp_clk_polarity		tx_clock_polarity;
+	omap_mcbsp_fs_polarity		fsx_polarity;
+	u8				clk_div;
+	omap_mcbsp_clk_stp_mode		clk_stp_mode;
+	omap_mcbsp_word_length		word_length;
+};
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+	void (*request)(unsigned int);
+	void (*free)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+	unsigned long phys_base;
+	u8 dma_rx_sync, dma_tx_sync;
+	u16 rx_irq, tx_irq;
+	struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 buffer_size;
+#endif
+};
+
+struct omap_mcbsp {
+	struct device *dev;
+	unsigned long phys_base;
+	void __iomem *io_base;
+	u8 id;
+	u8 free;
+	omap_mcbsp_word_length rx_word_length;
+	omap_mcbsp_word_length tx_word_length;
+
+	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+	/* IRQ based TX/RX */
+	int rx_irq;
+	int tx_irq;
+
+	/* DMA stuff */
+	u8 dma_rx_sync;
+	short dma_rx_lch;
+	u8 dma_tx_sync;
+	short dma_tx_lch;
+
+	/* Completion queues */
+	struct completion tx_irq_completion;
+	struct completion rx_irq_completion;
+	struct completion tx_dma_completion;
+	struct completion rx_dma_completion;
+
+	/* Protect the field .free, while checking if the mcbsp is in use */
+	spinlock_t lock;
+	struct omap_mcbsp_platform_data *pdata;
+	struct clk *iclk;
+	struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+	int dma_op_mode;
+	u16 max_tx_thres;
+	u16 max_rx_thres;
+#endif
+};
+extern struct omap_mcbsp **mcbsp_ptr;
+extern int omap_mcbsp_count;
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+					int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
+#endif
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/mcspi.h
rename to arch/arm/plat-omap/include/plat/mcspi.h
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
new file mode 100644
index 0000000..3325f7b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET		UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
+#define PHYS_OFFSET		UL(0x80000000)
+#endif
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)	\
+	({ dma_addr_t __dma = page_to_phys(page); \
+	   if (is_lbus_device(dev)) \
+		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+	   __dma; })
+
+#define __arch_dma_to_page(dev, addr)	\
+	({ dma_addr_t __dma = addr;				\
+	   if (is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
+	   phys_to_page(__dma);					\
+	})
+
+#define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
+						lbus_to_virt(addr) : \
+						__phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)	({ unsigned long __addr = (unsigned long)(addr); \
+					   (dma_addr_t) (is_lbus_device(dev) ? \
+						virt_to_lbus(__addr) : \
+						__virt_to_phys(__addr)); })
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/menelaus.h
rename to arch/arm/plat-omap/include/plat/menelaus.h
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
new file mode 100644
index 0000000..2993713
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -0,0 +1,157 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <plat/board.h>
+
+#define OMAP15XX_NR_MMC		1
+#define OMAP16XX_NR_MMC		2
+#define OMAP1_MMC_SIZE		0x080
+#define OMAP1_MMC1_BASE		0xfffb7800
+#define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+
+#define OMAP24XX_NR_MMC		2
+#define OMAP34XX_NR_MMC		3
+#define OMAP44XX_NR_MMC		5
+#define OMAP2420_MMC_SIZE	OMAP1_MMC_SIZE
+#define OMAP3_HSMMC_SIZE	0x200
+#define OMAP4_HSMMC_SIZE	0x1000
+#define OMAP2_MMC1_BASE		0x4809c000
+#define OMAP2_MMC2_BASE		0x480b4000
+#define OMAP3_MMC3_BASE		0x480ad000
+#define OMAP4_MMC4_BASE		0x480d1000
+#define OMAP4_MMC5_BASE		0x480d5000
+#define OMAP4_MMC_REG_OFFSET	0x100
+#define HSMMC5			(1 << 4)
+#define HSMMC4			(1 << 3)
+#define HSMMC3			(1 << 2)
+#define HSMMC2			(1 << 1)
+#define HSMMC1			(1 << 0)
+
+#define OMAP_MMC_MAX_SLOTS	2
+
+struct omap_mmc_platform_data {
+	/* back-link to device */
+	struct device *dev;
+
+	/* number of slots per controller */
+	unsigned nr_slots:2;
+
+	/* set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus */
+	unsigned int max_freq;
+
+	/* switch the bus to a new slot */
+	int (* switch_slot)(struct device *dev, int slot);
+	/* initialize board-specific MMC functionality, can be NULL if
+	 * not supported */
+	int (* init)(struct device *dev);
+	void (* cleanup)(struct device *dev);
+	void (* shutdown)(struct device *dev);
+
+	/* To handle board related suspend/resume functionality for MMC */
+	int (*suspend)(struct device *dev, int slot);
+	int (*resume)(struct device *dev, int slot);
+
+	/* Return context loss count due to PM states changing */
+	int (*get_context_loss_count)(struct device *dev);
+
+	u64 dma_mask;
+
+	struct omap_mmc_slot_data {
+
+		/* 4 wire signaling is optional, and is used for SD/SDIO/HSMMC;
+		 * 8 wire signaling is also optional, and is used with HSMMC
+		 */
+		u8 wires;
+
+		/*
+		 * nomux means "standard" muxing is wrong on this board, and
+		 * that board-specific code handled it before common init logic.
+		 */
+		unsigned nomux:1;
+
+		/* switch pin can be for card detect (default) or card cover */
+		unsigned cover:1;
+
+		/* use the internal clock */
+		unsigned internal_clock:1;
+
+		/* nonremovable e.g. eMMC */
+		unsigned nonremovable:1;
+
+		/* Try to sleep or power off when possible */
+		unsigned power_saving:1;
+
+		int switch_pin;			/* gpio (card detect) */
+		int gpio_wp;			/* gpio (write protect) */
+
+		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+		int (* get_ro)(struct device *dev, int slot);
+		int (*set_sleep)(struct device *dev, int slot, int sleep,
+				 int vdd, int cardsleep);
+
+		/* return MMC cover switch state, can be NULL if not supported.
+		 *
+		 * possible return values:
+		 *   0 - closed
+		 *   1 - open
+		 */
+		int (* get_cover_state)(struct device *dev, int slot);
+
+		const char *name;
+		u32 ocr_mask;
+
+		/* Card detection IRQs */
+		int card_detect_irq;
+		int (* card_detect)(int irq);
+
+		unsigned int ban_openended:1;
+
+	} slots[OMAP_MMC_MAX_SLOTS];
+};
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers);
+int omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
+				int nr_controllers)
+{
+}
+static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+				unsigned long size, unsigned int irq,
+				struct omap_mmc_platform_data *data)
+{
+	return 0;
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
new file mode 100644
index 0000000..ba77de6
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -0,0 +1,878 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+/* 24xx/34xx mux bit defines */
+#define OMAP2_PULL_ENA		(1 << 3)
+#define OMAP2_PULL_UP		(1 << 4)
+#define OMAP2_ALTELECTRICALSEL	(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP3_INPUT_EN		(1 << 8)
+#define OMAP3_OFF_EN		(1 << 9)
+#define OMAP3_OFFOUT_EN		(1 << 10)
+#define OMAP3_OFFOUT_VAL	(1 << 11)
+#define OMAP3_OFF_PULL_EN	(1 << 12)
+#define OMAP3_OFF_PULL_UP	(1 << 13)
+#define OMAP3_WAKEUP_EN		(1 << 14)
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define	OMAP34XX_MUX_MODE0	0
+#define	OMAP34XX_MUX_MODE1	1
+#define	OMAP34XX_MUX_MODE2	2
+#define	OMAP34XX_MUX_MODE3	3
+#define	OMAP34XX_MUX_MODE4	4
+#define	OMAP34XX_MUX_MODE5	5
+#define	OMAP34XX_MUX_MODE6	6
+#define	OMAP34XX_MUX_MODE7	7
+
+/* 34xx active pin states */
+#define OMAP34XX_PIN_OUTPUT		0
+#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
+#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
+						| OMAP2_PULL_UP)
+#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
+
+/* 34xx off mode states */
+#define OMAP34XX_PIN_OFF_NONE           0
+#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
+						| OMAP3_OFFOUT_VAL)
+#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
+#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
+						| OMAP3_OFF_PULL_UP)
+#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
+#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
+
+#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
+	.name		= desc,					\
+	.debug		= 0,					\
+	.mux_reg	= reg_offset,				\
+	.mux_val	= mux_value				\
+},
+
+struct pin_config {
+	char 			*name;
+	const unsigned int 	mux_reg;
+	unsigned char		debug;
+
+#if	defined(CONFIG_ARCH_OMAP34XX)
+	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
+#endif
+
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+#endif
+
+#if	defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+	const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+	/* OMAP 730 keyboard */
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
+
+	/* USB */
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
+
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
+
+	/* 24xx clock */
+	W14_24XX_SYS_CLKOUT,
+
+	/* 24xx GPMC chipselects, wait pin monitoring */
+	E2_GPMC_NCS2,
+	L2_GPMC_NCS7,
+	L3_GPMC_WAIT0,
+	N7_GPMC_WAIT1,
+	M1_GPMC_WAIT2,
+	P1_GPMC_WAIT3,
+
+	/* 242X McBSP */
+	Y15_24XX_MCBSP2_CLKX,
+	R14_24XX_MCBSP2_FSX,
+	W15_24XX_MCBSP2_DR,
+	V15_24XX_MCBSP2_DX,
+
+	/* 24xx GPIO */
+	M21_242X_GPIO11,
+	P21_242X_GPIO12,
+	AA10_242X_GPIO13,
+	AA6_242X_GPIO14,
+	AA4_242X_GPIO15,
+	Y11_242X_GPIO16,
+	AA12_242X_GPIO17,
+	AA8_242X_GPIO58,
+	Y20_24XX_GPIO60,
+	W4__24XX_GPIO74,
+	N15_24XX_GPIO85,
+	M15_24XX_GPIO92,
+	P20_24XX_GPIO93,
+	P18_24XX_GPIO95,
+	M18_24XX_GPIO96,
+	L14_24XX_GPIO97,
+	J15_24XX_GPIO99,
+	V14_24XX_GPIO117,
+	P14_24XX_GPIO125,
+
+	/* 242x DBG GPIO */
+	V4_242X_GPIO49,
+	W2_242X_GPIO50,
+	U4_242X_GPIO51,
+	V3_242X_GPIO52,
+	V2_242X_GPIO53,
+	V6_242X_GPIO53,
+	T4_242X_GPIO54,
+	Y4_242X_GPIO54,
+	T3_242X_GPIO55,
+	U2_242X_GPIO56,
+
+	/* 24xx external DMA requests */
+	AA10_242X_DMAREQ0,
+	AA6_242X_DMAREQ1,
+	E4_242X_DMAREQ2,
+	G4_242X_DMAREQ3,
+	D3_242X_DMAREQ4,
+	E3_242X_DMAREQ5,
+
+	/* UART3 */
+	K15_24XX_UART3_TX,
+	K14_24XX_UART3_RX,
+
+	/* MMC/SDIO */
+	G19_24XX_MMC_CLKO,
+	H18_24XX_MMC_CMD,
+	F20_24XX_MMC_DAT0,
+	H14_24XX_MMC_DAT1,
+	E19_24XX_MMC_DAT2,
+	D19_24XX_MMC_DAT3,
+	F19_24XX_MMC_DAT_DIR0,
+	E20_24XX_MMC_DAT_DIR1,
+	F18_24XX_MMC_DAT_DIR2,
+	E18_24XX_MMC_DAT_DIR3,
+	G18_24XX_MMC_CMD_DIR,
+	H15_24XX_MMC_CLKI,
+
+	/* Full speed USB */
+	J20_24XX_USB0_PUEN,
+	J19_24XX_USB0_VP,
+	K20_24XX_USB0_VM,
+	J18_24XX_USB0_RCV,
+	K19_24XX_USB0_TXEN,
+	J14_24XX_USB0_SE0,
+	K18_24XX_USB0_DAT,
+
+	N14_24XX_USB1_SE0,
+	W12_24XX_USB1_SE0,
+	P15_24XX_USB1_DAT,
+	R13_24XX_USB1_DAT,
+	W20_24XX_USB1_TXEN,
+	P13_24XX_USB1_TXEN,
+	V19_24XX_USB1_RCV,
+	V12_24XX_USB1_RCV,
+
+	AA10_24XX_USB2_SE0,
+	Y11_24XX_USB2_DAT,
+	AA12_24XX_USB2_TXEN,
+	AA6_24XX_USB2_RCV,
+	AA4_24XX_USB2_TLLSE0,
+
+	/* Keypad GPIO*/
+	T19_24XX_KBR0,
+	R19_24XX_KBR1,
+	V18_24XX_KBR2,
+	M21_24XX_KBR3,
+	E5__24XX_KBR4,
+	M18_24XX_KBR5,
+	R20_24XX_KBC0,
+	M14_24XX_KBC1,
+	H19_24XX_KBC2,
+	V17_24XX_KBC3,
+	P21_24XX_KBC4,
+	L14_24XX_KBC5,
+	N19_24XX_KBC6,
+
+	/* 24xx Menelaus Keypad GPIO */
+	B3__24XX_KBR5,
+	AA4_24XX_KBC2,
+	B13_24XX_KBC6,
+
+	/* 2430 USB */
+	AD9_2430_USB0_PUEN,
+	Y11_2430_USB0_VP,
+	AD7_2430_USB0_VM,
+	AE7_2430_USB0_RCV,
+	AD4_2430_USB0_TXEN,
+	AF9_2430_USB0_SE0,
+	AE6_2430_USB0_DAT,
+	AD24_2430_USB1_SE0,
+	AB24_2430_USB1_RCV,
+	Y25_2430_USB1_TXEN,
+	AA26_2430_USB1_DAT,
+
+	/* 2430 HS-USB */
+	AD9_2430_USB0HS_DATA3,
+	Y11_2430_USB0HS_DATA4,
+	AD7_2430_USB0HS_DATA5,
+	AE7_2430_USB0HS_DATA6,
+	AD4_2430_USB0HS_DATA2,
+	AF9_2430_USB0HS_DATA0,
+	AE6_2430_USB0HS_DATA1,
+	AE8_2430_USB0HS_CLK,
+	AD8_2430_USB0HS_DIR,
+	AE5_2430_USB0HS_STP,
+	AE9_2430_USB0HS_NXT,
+	AC7_2430_USB0HS_DATA7,
+
+	/* 2430 McBSP */
+	AD6_2430_MCBSP_CLKS,
+
+	AB2_2430_MCBSP1_CLKR,
+	AD5_2430_MCBSP1_FSR,
+	AA1_2430_MCBSP1_DX,
+	AF3_2430_MCBSP1_DR,
+	AB3_2430_MCBSP1_FSX,
+	Y9_2430_MCBSP1_CLKX,
+
+	AC10_2430_MCBSP2_FSX,
+	AD16_2430_MCBSP2_CLX,
+	AE13_2430_MCBSP2_DX,
+	AD13_2430_MCBSP2_DR,
+	AC10_2430_MCBSP2_FSX_OFF,
+	AD16_2430_MCBSP2_CLX_OFF,
+	AE13_2430_MCBSP2_DX_OFF,
+	AD13_2430_MCBSP2_DR_OFF,
+
+	AC9_2430_MCBSP3_CLKX,
+	AE4_2430_MCBSP3_FSX,
+	AE2_2430_MCBSP3_DR,
+	AF4_2430_MCBSP3_DX,
+
+	N3_2430_MCBSP4_CLKX,
+	AD23_2430_MCBSP4_DR,
+	AB25_2430_MCBSP4_DX,
+	AC25_2430_MCBSP4_FSX,
+
+	AE16_2430_MCBSP5_CLKX,
+	AF12_2430_MCBSP5_FSX,
+	K7_2430_MCBSP5_DX,
+	M1_2430_MCBSP5_DR,
+
+	/* 2430 McSPI*/
+	Y18_2430_MCSPI1_CLK,
+	AD15_2430_MCSPI1_SIMO,
+	AE17_2430_MCSPI1_SOMI,
+	U1_2430_MCSPI1_CS0,
+
+	/* Touchscreen GPIO */
+	AF19_2430_GPIO_85,
+
+};
+
+enum omap34xx_index {
+	/* 34xx I2C */
+	K21_34XX_I2C1_SCL,
+	J21_34XX_I2C1_SDA,
+	AF15_34XX_I2C2_SCL,
+	AE15_34XX_I2C2_SDA,
+	AF14_34XX_I2C3_SCL,
+	AG14_34XX_I2C3_SDA,
+	AD26_34XX_I2C4_SCL,
+	AE26_34XX_I2C4_SDA,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
+	Y8_3430_USB1HS_PHY_CLK,
+	Y9_3430_USB1HS_PHY_STP,
+	AA14_3430_USB1HS_PHY_DIR,
+	AA11_3430_USB1HS_PHY_NXT,
+	W13_3430_USB1HS_PHY_DATA0,
+	W12_3430_USB1HS_PHY_DATA1,
+	W11_3430_USB1HS_PHY_DATA2,
+	Y11_3430_USB1HS_PHY_DATA3,
+	W9_3430_USB1HS_PHY_DATA4,
+	Y12_3430_USB1HS_PHY_DATA5,
+	W8_3430_USB1HS_PHY_DATA6,
+	Y13_3430_USB1HS_PHY_DATA7,
+
+	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
+	AA8_3430_USB2HS_PHY_CLK,
+	AA10_3430_USB2HS_PHY_STP,
+	AA9_3430_USB2HS_PHY_DIR,
+	AB11_3430_USB2HS_PHY_NXT,
+	AB10_3430_USB2HS_PHY_DATA0,
+	AB9_3430_USB2HS_PHY_DATA1,
+	W3_3430_USB2HS_PHY_DATA2,
+	T4_3430_USB2HS_PHY_DATA3,
+	T3_3430_USB2HS_PHY_DATA4,
+	R3_3430_USB2HS_PHY_DATA5,
+	R4_3430_USB2HS_PHY_DATA6,
+	T2_3430_USB2HS_PHY_DATA7,
+
+
+	/* TLL - HSUSB: 12-pin TLL Port 1*/
+	Y8_3430_USB1HS_TLL_CLK,
+	Y9_3430_USB1HS_TLL_STP,
+	AA14_3430_USB1HS_TLL_DIR,
+	AA11_3430_USB1HS_TLL_NXT,
+	W13_3430_USB1HS_TLL_DATA0,
+	W12_3430_USB1HS_TLL_DATA1,
+	W11_3430_USB1HS_TLL_DATA2,
+	Y11_3430_USB1HS_TLL_DATA3,
+	W9_3430_USB1HS_TLL_DATA4,
+	Y12_3430_USB1HS_TLL_DATA5,
+	W8_3430_USB1HS_TLL_DATA6,
+	Y13_3430_USB1HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 2*/
+	AA8_3430_USB2HS_TLL_CLK,
+	AA10_3430_USB2HS_TLL_STP,
+	AA9_3430_USB2HS_TLL_DIR,
+	AB11_3430_USB2HS_TLL_NXT,
+	AB10_3430_USB2HS_TLL_DATA0,
+	AB9_3430_USB2HS_TLL_DATA1,
+	W3_3430_USB2HS_TLL_DATA2,
+	T4_3430_USB2HS_TLL_DATA3,
+	T3_3430_USB2HS_TLL_DATA4,
+	R3_3430_USB2HS_TLL_DATA5,
+	R4_3430_USB2HS_TLL_DATA6,
+	T2_3430_USB2HS_TLL_DATA7,
+
+	/* TLL - HSUSB: 12-pin TLL Port 3*/
+	AA6_3430_USB3HS_TLL_CLK,
+	AB3_3430_USB3HS_TLL_STP,
+	AA3_3430_USB3HS_TLL_DIR,
+	Y3_3430_USB3HS_TLL_NXT,
+	AA5_3430_USB3HS_TLL_DATA0,
+	Y4_3430_USB3HS_TLL_DATA1,
+	Y5_3430_USB3HS_TLL_DATA2,
+	W5_3430_USB3HS_TLL_DATA3,
+	AB12_3430_USB3HS_TLL_DATA4,
+	AB13_3430_USB3HS_TLL_DATA5,
+	AA13_3430_USB3HS_TLL_DATA6,
+	AA12_3430_USB3HS_TLL_DATA7,
+
+	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
+	AF10_3430_USB1FS_PHY_MM1_RXDP,
+	AG9_3430_USB1FS_PHY_MM1_RXDM,
+	W13_3430_USB1FS_PHY_MM1_RXRCV,
+	W12_3430_USB1FS_PHY_MM1_TXSE0,
+	W11_3430_USB1FS_PHY_MM1_TXDAT,
+	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
+	AF7_3430_USB2FS_PHY_MM2_RXDP,
+	AH7_3430_USB2FS_PHY_MM2_RXDM,
+	AB10_3430_USB2FS_PHY_MM2_RXRCV,
+	AB9_3430_USB2FS_PHY_MM2_TXSE0,
+	W3_3430_USB2FS_PHY_MM2_TXDAT,
+	T4_3430_USB2FS_PHY_MM2_TXEN_N,
+
+	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
+	AH3_3430_USB3FS_PHY_MM3_RXDP,
+	AE3_3430_USB3FS_PHY_MM3_RXDM,
+	AD1_3430_USB3FS_PHY_MM3_RXRCV,
+	AE1_3430_USB3FS_PHY_MM3_TXSE0,
+	AD2_3430_USB3FS_PHY_MM3_TXDAT,
+	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
+
+	/* 34xx GPIO
+	 *  - normally these are bidirectional, no internal pullup/pulldown
+	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
+	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
+	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
+	 */
+	AF26_34XX_GPIO0,
+	AF22_34XX_GPIO9,
+	AG9_34XX_GPIO23,
+	AH8_34XX_GPIO29,
+	U8_34XX_GPIO54_OUT,
+	U8_34XX_GPIO54_DOWN,
+	L8_34XX_GPIO63,
+	G25_34XX_GPIO86_OUT,
+	AG4_34XX_GPIO134_OUT,
+	AF4_34XX_GPIO135_OUT,
+	AE4_34XX_GPIO136_OUT,
+	AF6_34XX_GPIO140_UP,
+	AE6_34XX_GPIO141,
+	AF5_34XX_GPIO142,
+	AE5_34XX_GPIO143,
+	H19_34XX_GPIO164_OUT,
+	J25_34XX_GPIO170,
+
+	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+	H16_34XX_SDRC_CKE0,
+	H17_34XX_SDRC_CKE1,
+
+	/* MMC1 */
+	N28_3430_MMC1_CLK,
+	M27_3430_MMC1_CMD,
+	N27_3430_MMC1_DAT0,
+	N26_3430_MMC1_DAT1,
+	N25_3430_MMC1_DAT2,
+	P28_3430_MMC1_DAT3,
+	P27_3430_MMC1_DAT4,
+	P26_3430_MMC1_DAT5,
+	R27_3430_MMC1_DAT6,
+	R25_3430_MMC1_DAT7,
+
+	/* MMC2 */
+	AE2_3430_MMC2_CLK,
+	AG5_3430_MMC2_CMD,
+	AH5_3430_MMC2_DAT0,
+	AH4_3430_MMC2_DAT1,
+	AG4_3430_MMC2_DAT2,
+	AF4_3430_MMC2_DAT3,
+	AE4_3430_MMC2_DAT4,
+	AH3_3430_MMC2_DAT5,
+	AF3_3430_MMC2_DAT6,
+	AE3_3430_MMC2_DAT7,
+
+	/* MMC3 */
+	AF10_3430_MMC3_CLK,
+	AC3_3430_MMC3_CMD,
+	AE11_3430_MMC3_DAT0,
+	AH9_3430_MMC3_DAT1,
+	AF13_3430_MMC3_DAT2,
+	AF13_3430_MMC3_DAT3,
+
+	/* SYS_NIRQ T2 INT1 */
+	AF26_34XX_SYS_NIRQ,
+
+	/* EHCI GPIO's for OMAP3EVM (Rev >= E) */
+	AH14_34XX_GPIO21,
+	AF9_34XX_GPIO22,
+	U3_34XX_GPIO61,
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/plat/nand.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/nand.h
rename to arch/arm/plat-omap/include/plat/nand.h
diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
new file mode 100644
index 0000000..b53055b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History
+ *  -------
+ *
+ *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
+ *  					original version based in sa1100 driver
+ *  					and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <plat/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <plat/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE	(1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+	char *id;		/* identification string */
+	int stream_id;		/* numeric identification */
+	int dma_dev;		/* dma number of that device */
+	int *lch;		/* Chain of channels this stream is linked to */
+	char started;		/* to store if the chain was started or not */
+	int dma_q_head;		/* DMA Channel Q Head */
+	int dma_q_tail;		/* DMA Channel Q Tail */
+	char dma_q_count;	/* DMA Channel Q Count */
+	int active:1;		/* we are using this stream for transfer now */
+	int period;		/* current transfer period */
+	int periods;		/* current count of periods registerd in the DMA engine */
+	spinlock_t dma_lock;	/* for locking in DMA operations */
+	struct snd_pcm_substream *stream;	/* the pcm stream */
+	unsigned linked:1;	/* dma channels linked */
+	int offset;		/* store start position of the last period in the alsa buffer */
+	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
+	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	long samplerate;
+	struct audio_stream s[2];	/* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+	char 	*name;
+	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
+	struct	snd_pcm_hardware *snd_omap_alsa_playback;
+	struct	snd_pcm_hardware *snd_omap_alsa_capture;
+	void	(*codec_configure_dev)(void);
+	void	(*codec_set_samplerate)(long);
+	void	(*codec_clock_setup)(void);
+	int	(*codec_clock_on)(void);
+	int 	(*codec_clock_off)(void);
+	int	(*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend	NULL
+#define snd_omap_alsa_resume	NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/omap-pm.h
rename to arch/arm/plat-omap/include/plat/omap-pm.h
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/omap1510.h
rename to arch/arm/plat-omap/include/plat/omap1510.h
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/omap16xx.h
rename to arch/arm/plat-omap/include/plat/omap16xx.h
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/omap24xx.h
rename to arch/arm/plat-omap/include/plat/omap24xx.h
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
new file mode 100644
index 0000000..077f059
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE		0x48000000
+#define L4_WK_34XX_BASE		0x48300000
+#define L4_PER_34XX_BASE	0x49000000
+#define L4_EMU_34XX_BASE	0x54000000
+#define L3_34XX_BASE		0x68000000
+
+#define OMAP3430_32KSYNCT_BASE	0x48320000
+#define OMAP3430_CM_BASE	0x48004800
+#define OMAP3430_PRM_BASE	0x48306800
+#define OMAP343X_SMS_BASE	0x6C000000
+#define OMAP343X_SDRC_BASE	0x6D000000
+#define OMAP34XX_GPMC_BASE	0x6E000000
+#define OMAP343X_SCM_BASE	0x48002000
+#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE	0x48200000
+
+#define OMAP3430_ISP_BASE		(L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE		(OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE		(OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE		(OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE		(OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE		(OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE		(OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE		(OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE		(OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE		(OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_BASE		(OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSI2PHY_BASE	(OMAP3430_ISP_BASE + 0x1970)
+
+#define OMAP3430_ISP_END		(OMAP3430_ISP_BASE         + 0x06F)
+#define OMAP3430_ISP_CBUFF_END		(OMAP3430_ISP_CBUFF_BASE   + 0x077)
+#define OMAP3430_ISP_CCP2_END		(OMAP3430_ISP_CCP2_BASE    + 0x1EF)
+#define OMAP3430_ISP_CCDC_END		(OMAP3430_ISP_CCDC_BASE    + 0x0A7)
+#define OMAP3430_ISP_HIST_END		(OMAP3430_ISP_HIST_BASE    + 0x047)
+#define OMAP3430_ISP_H3A_END		(OMAP3430_ISP_H3A_BASE     + 0x05F)
+#define OMAP3430_ISP_PREV_END		(OMAP3430_ISP_PREV_BASE    + 0x09F)
+#define OMAP3430_ISP_RESZ_END		(OMAP3430_ISP_RESZ_BASE    + 0x0AB)
+#define OMAP3430_ISP_SBL_END		(OMAP3430_ISP_SBL_BASE     + 0x0FB)
+#define OMAP3430_ISP_MMU_END		(OMAP3430_ISP_MMU_BASE     + 0x06F)
+#define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
+#define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
+
+#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE	(L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE	(L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE	0x480C9000
+#define OMAP34XX_SR2_BASE	0x480CB000
+
+#define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
+
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
new file mode 100644
index 0000000..e52902a
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -0,0 +1,46 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE			0x4a000000
+#define L4_WK_44XX_BASE			0x4a300000
+#define L4_PER_44XX_BASE		0x48000000
+#define L4_EMU_44XX_BASE		0x54000000
+#define L3_44XX_BASE			0x44000000
+#define OMAP44XX_EMIF1_BASE		0x4c000000
+#define OMAP44XX_EMIF2_BASE		0x4d000000
+#define OMAP44XX_DMM_BASE		0x4e000000
+#define OMAP4430_32KSYNCT_BASE		0x4a304000
+#define OMAP4430_CM_BASE		0x4a004000
+#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP44XX_GPMC_BASE		0x50000000
+#define OMAP443X_SCM_BASE		0x4a002000
+#define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE		0x48200000
+#define OMAP44XX_IVA_INTC_BASE		0x40000000
+#define IRQ_SIR_IRQ			0x0040
+#define OMAP44XX_GIC_DIST_BASE		0x48241000
+#define OMAP44XX_GIC_CPU_BASE		0x48240100
+#define OMAP44XX_SCU_BASE		0x48240000
+#define OMAP44XX_LOCAL_TWD_BASE		0x48240600
+#define OMAP44XX_WKUPGEN_BASE		0x48281000
+
+#define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/omap730.h
rename to arch/arm/plat-omap/include/plat/omap730.h
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
new file mode 100644
index 0000000..53f5241
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -0,0 +1,104 @@
+/* arch/arm/plat-omap/include/mach/omap7xx.h
+ *
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/omap850.h
rename to arch/arm/plat-omap/include/plat/omap850.h
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
new file mode 100644
index 0000000..11a9773
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -0,0 +1,141 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/omap_hwmod.h>
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN	0
+#define OMAP_DEVICE_STATE_ENABLED	1
+#define OMAP_DEVICE_STATE_IDLE		2
+#define OMAP_DEVICE_STATE_SHUTDOWN	3
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in microseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+	struct platform_device		pdev;
+	struct omap_hwmod		**hwmods;
+	struct omap_device_pm_latency	*pm_lats;
+	u32				dev_wakeup_lat;
+	u32				_dev_wakeup_lat_limit;
+	u8				pm_lats_cnt;
+	s8				pm_lat_level;
+	u8				hwmods_cnt;
+	u8				_state;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+				      struct omap_hwmod *oh, void *pdata,
+				      int pdata_len,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+					 struct omap_hwmod **oh, int oh_cnt,
+					 void *pdata, int pdata_len,
+					 struct omap_device_pm_latency *pm_lats,
+					 int pm_lats_cnt);
+
+int omap_device_register(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+			     u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+	u32 deactivate_lat;
+	int (*deactivate_func)(struct omap_device *od);
+	u32 activate_lat;
+	int (*activate_func)(struct omap_device *od);
+};
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
new file mode 100644
index 0000000..dbdd123
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -0,0 +1,447 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoit Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ *
+ * References:
+ * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
+ * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
+ * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
+ * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
+ * - Open Core Protocol Specification 2.2
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+
+#include <plat/cpu.h>
+
+struct omap_device;
+
+/* OCP SYSCONFIG bit shifts/masks */
+#define SYSC_MIDLEMODE_SHIFT		12
+#define SYSC_MIDLEMODE_MASK		(0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_CLOCKACTIVITY_SHIFT	8
+#define SYSC_CLOCKACTIVITY_MASK		(0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_SIDLEMODE_SHIFT		3
+#define SYSC_SIDLEMODE_MASK		(0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_ENAWAKEUP_SHIFT		2
+#define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_SOFTRESET_SHIFT		1
+#define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT		0
+#define SYSS_RESETDONE_MASK		(1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE		(1 << 0)
+#define HWMOD_IDLEMODE_NO		(1 << 1)
+#define HWMOD_IDLEMODE_SMART		(1 << 2)
+
+
+/**
+ * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_ch: DMA channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+	const char	*name;
+	u16		dma_ch;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clkdev_dev_id: opt clock: clkdev dev_id string
+ * @clkdev_con_id: opt clock: clkdev con_id string
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+	const char	*role;
+	const char	*clkdev_dev_id;
+	const char	*clkdev_con_id;
+	struct clk	*_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3		(1 << 0)
+#define OMAP_FIREWALL_L4		(1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+	u8 l3_perm_bit;
+	u8 l4_fw_region;
+	u8 l4_prot_group;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT	(1 << 0)
+#define ADDR_TYPE_RT		(1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - MPU address space handled by the hwmod
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+	u32 pa_start;
+	u32 pa_end;
+	u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU			(1 << 0)
+#define OCP_USER_SDMA			(1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_HAS_IDLEST		(1 << 0)
+#define OCPIF_SWSUP_IDLE		(1 << 1)
+#define OCPIF_CAN_BURST			(1 << 2)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clkdev_dev_id: interface clock: clkdev dev_id string
+ * @clkdev_con_id: interface clock: clkdev con_id string
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @addr_cnt: ARRAY_SIZE(@addr)
+ * @width: OCP data width
+ * @thread_cnt: number of threads
+ * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+	struct omap_hwmod		*master;
+	struct omap_hwmod		*slave;
+	struct omap_hwmod_addr_space	*addr;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	union {
+		struct omap_hwmod_omap2_firewall omap2;
+	}				fw;
+	u8				addr_cnt;
+	u8				width;
+	u8				thread_cnt;
+	u8				max_burst_len;
+	u8				user;
+	u8				flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT	2
+#define SLAVE_IDLE_SHIFT	0
+#define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE	(1 << 0)
+#define SYSC_HAS_SOFTRESET	(1 << 1)
+#define SYSC_HAS_ENAWAKEUP	(1 << 2)
+#define SYSC_HAS_EMUFREE	(1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
+#define SYSC_HAS_SIDLEMODE	(1 << 5)
+#define SYSC_HAS_MIDLEMODE	(1 << 6)
+#define SYSS_MISSING		(1 << 7)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH	0x0
+#define CLOCKACT_TEST_MAIN	0x1
+#define CLOCKACT_TEST_ICLK	0x2
+#define CLOCKACT_TEST_NONE	0x3
+
+/**
+ * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ */
+struct omap_hwmod_sysconfig {
+	u16 rev_offs;
+	u16 sysc_offs;
+	u16 syss_offs;
+	u8 idlemodes;
+	u8 sysc_flags;
+	u8 clockact;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+	s16 module_offs;
+	u8 prcm_reg_id;
+	u8 module_bit;
+	u8 idlest_reg_id;
+	u8 idlest_idle_bit;
+	u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
+ * @device_offs: device register offset from @module_offs
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+	u32 module_offs;
+	u16 device_offs;
+	u8 submodule_wkdep_bit;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc.
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc.
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ */
+#define HWMOD_SWSUP_SIDLE			(1 << 0)
+#define HWMOD_SWSUP_MSTANDBY			(1 << 1)
+#define HWMOD_INIT_NO_RESET			(1 << 2)
+#define HWMOD_INIT_NO_IDLE			(1 << 3)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ */
+#define _HWMOD_NO_MPU_PORT			(1 << 0)
+#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN			0
+#define _HWMOD_STATE_REGISTERED			1
+#define _HWMOD_STATE_CLKS_INITED		2
+#define _HWMOD_STATE_INITIALIZED		3
+#define _HWMOD_STATE_ENABLED			4
+#define _HWMOD_STATE_IDLE			5
+#define _HWMOD_STATE_DISABLED			6
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
+ * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @prcm: PRCM data pertaining to this hwmod
+ * @clkdev_dev_id: main clock: clkdev dev_id string
+ * @clkdev_con_id: main clock: clkdev con_id string
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @sysconfig: device SYSCONFIG/SYSSTATUS register data
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
+ * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
+ * @mpu_irqs_cnt: number of @mpu_irqs
+ * @sdma_chs_cnt: number of @sdma_chs
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @flags: hwmod flags (documented below)
+ * @omap_chip: OMAP chips this hwmod is present on
+ * @node: list node for hwmod list (internal use)
+ *
+ * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main
+ * clock," which for our purposes is defined as "the functional clock needed
+ * for register accesses to complete."  Modules may not have a main clock if
+ * the interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+	const char			*name;
+	struct omap_device		*od;
+	u8				*mpu_irqs;
+	struct omap_hwmod_dma_info	*sdma_chs;
+	union {
+		struct omap_hwmod_omap2_prcm omap2;
+		struct omap_hwmod_omap4_prcm omap4;
+	}				prcm;
+	const char			*clkdev_dev_id;
+	const char			*clkdev_con_id;
+	struct clk			*_clk;
+	struct omap_hwmod_opt_clk	*opt_clks;
+	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
+	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
+	struct omap_hwmod_sysconfig	*sysconfig;
+	void				*dev_attr;
+	u32				_sysc_cache;
+	void __iomem			*_rt_va;
+	struct list_head		node;
+	u16				flags;
+	u8				_mpu_port_index;
+	u8				msuspendmux_reg_id;
+	u8				msuspendmux_shift;
+	u8				response_lat;
+	u8				mpu_irqs_cnt;
+	u8				sdma_chs_cnt;
+	u8				opt_clks_cnt;
+	u8				masters_cnt;
+	u8				slaves_cnt;
+	u8				hwmods_cnt;
+	u8				_int_flags;
+	u8				_state;
+	const struct omap_chip_id	omap_chip;
+};
+
+int omap_hwmod_init(struct omap_hwmod **ohs);
+int omap_hwmod_register(struct omap_hwmod *oh);
+int omap_hwmod_unregister(struct omap_hwmod *oh);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh));
+int omap_hwmod_late_init(void);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+				 struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h
new file mode 100644
index 0000000..bfef7ab
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omapfb.h
@@ -0,0 +1,398 @@
+/*
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_EVENT_READY	1
+#define OMAPFB_EVENT_DISABLED	2
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  reserved1;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <plat/board.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct lcd_panel *panel,
+					 struct omapfb_device *fbdev);
+	void		(*cleanup)	(struct lcd_panel *panel);
+	int		(*enable)	(struct lcd_panel *panel);
+	void		(*disable)	(struct lcd_panel *panel);
+	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+	int		(*set_bklight_level)(struct lcd_panel *panel,
+					     unsigned int level);
+	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];		/* set by extif->convert_timings */
+
+	int converted;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(struct omapfb_device *fbdev);
+	void (*cleanup)		(void);
+	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+	unsigned long (*get_max_tx_rate)(void);
+	int  (*convert_timings)	(struct extif_timings *timings);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*set_bits_per_cycle)(int bpc);
+	void (*write_command)	(const void *buf, unsigned int len);
+	void (*read_data)	(void *buf, unsigned int len);
+	void (*write_data)	(const void *buf, unsigned int len);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void * data), void *data);
+	int  (*setup_tearsync)	(unsigned pin_cnt,
+				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+				 int hs_pol_inv, int vs_pol_inv, int div);
+	int  (*enable_tearsync) (int enable, unsigned line);
+
+	unsigned long		max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+	struct notifier_block	nb;
+	void			*data;
+	int			plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+					  unsigned long event,
+					  void *fbi);
+
+struct omapfb_mem_region {
+	u32		paddr;
+	void __iomem	*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode,
+					   struct omapfb_mem_desc *req_md);
+	void		(*cleanup)	  (void);
+	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
+	int		(*setup_mem)	  (int plane, size_t size,
+					   int mem_type, unsigned long *paddr);
+	int		(*mmap)		  (struct fb_info *info,
+					   struct vm_area_struct *vma);
+	int		(*set_scale)	  (int plane,
+					   int orig_width, int orig_height,
+					   int out_width, int out_height);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct fb_info *fbi,
+					   struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+	int		(*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED	= 0,
+	OMAPFB_SUSPENDED= 99,
+	OMAPFB_ACTIVE	= 100
+};
+
+struct omapfb_plane_struct {
+	int				idx;
+	struct omapfb_plane_info	info;
+	enum omapfb_color_format	color_mode;
+	struct omapfb_device		*fbdev;
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+	struct mutex		rqueue_mutex;
+
+	int			palette_size;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	const struct lcd_ctrl	*ctrl;			/* LCD controller */
+	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct device		*dev;
+	struct fb_var_screeninfo	new_var;	/* for mode changes */
+
+	struct omapfb_mem_desc		mem_desc;
+	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+	struct omapfb_mem_desc		mem_desc;
+	void				*ctrl_platform_data;
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_reserve_sdram(void);
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+				  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+				   omapfb_notifier_callback_t callback,
+				   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int  omapfb_update_window_async(struct fb_info *fbi,
+				       struct omapfb_update_window *win,
+				       void (*callback)(void *),
+				       void *callback_data);
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/onenand.h
rename to arch/arm/plat-omap/include/plat/onenand.h
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/plat/param.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/param.h
rename to arch/arm/plat-omap/include/plat/param.h
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
new file mode 100644
index 0000000..3d45ee1
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -0,0 +1,182 @@
+/*
+ * OMAP2/3 powerdomain control
+ *
+ * Copyright (C) 2007-8 Texas Instruments, Inc.
+ * Copyright (C) 2007-8 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN
+#define ASM_ARM_ARCH_OMAP_POWERDOMAIN
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+#include <asm/atomic.h>
+
+#include <plat/cpu.h>
+
+
+/* Powerdomain basic power states */
+#define PWRDM_POWER_OFF		0x0
+#define PWRDM_POWER_RET		0x1
+#define PWRDM_POWER_INACTIVE	0x2
+#define PWRDM_POWER_ON		0x3
+
+/* Powerdomain allowable state bitfields */
+#define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
+				 (1 << PWRDM_POWER_ON))
+
+#define PWRSTS_OFF_RET		((1 << PWRDM_POWER_OFF) | \
+				 (1 << PWRDM_POWER_RET))
+
+#define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
+
+
+/* Powerdomain flags */
+#define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
+
+
+/*
+ * Number of memory banks that are power-controllable.	On OMAP3430, the
+ * maximum is 4.
+ */
+#define PWRDM_MAX_MEM_BANKS	4
+
+/*
+ * Maximum number of clockdomains that can be associated with a powerdomain.
+ * CORE powerdomain on OMAP3 is the worst case
+ */
+#define PWRDM_MAX_CLKDMS	4
+
+/* XXX A completely arbitrary number. What is reasonable here? */
+#define PWRDM_TRANSITION_BAILOUT 100000
+
+struct clockdomain;
+struct powerdomain;
+
+/* Encodes dependencies between powerdomains - statically defined */
+struct pwrdm_dep {
+
+	/* Powerdomain name */
+	const char *pwrdm_name;
+
+	/* Powerdomain pointer - resolved by the powerdomain code */
+	struct powerdomain *pwrdm;
+
+	/* Flags to mark OMAP chip restrictions, etc. */
+	const struct omap_chip_id omap_chip;
+
+};
+
+struct powerdomain {
+
+	/* Powerdomain name */
+	const char *name;
+
+	/* the address offset from CM_BASE/PRM_BASE */
+	const s16 prcm_offs;
+
+	/* Used to represent the OMAP chip types containing this pwrdm */
+	const struct omap_chip_id omap_chip;
+
+	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
+	const u8 dep_bit;
+
+	/* Powerdomains that can be told to wake this powerdomain up */
+	struct pwrdm_dep *wkdep_srcs;
+
+	/* Powerdomains that can be told to keep this pwrdm from inactivity */
+	struct pwrdm_dep *sleepdep_srcs;
+
+	/* Possible powerdomain power states */
+	const u8 pwrsts;
+
+	/* Possible logic power states when pwrdm in RETENTION */
+	const u8 pwrsts_logic_ret;
+
+	/* Powerdomain flags */
+	const u8 flags;
+
+	/* Number of software-controllable memory banks in this powerdomain */
+	const u8 banks;
+
+	/* Possible memory bank pwrstates when pwrdm in RETENTION */
+	const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
+
+	/* Possible memory bank pwrstates when pwrdm is ON */
+	const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
+
+	/* Clockdomains in this powerdomain */
+	struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
+
+	struct list_head node;
+
+	int state;
+	unsigned state_counter[4];
+
+#ifdef CONFIG_PM_DEBUG
+	s64 timer;
+	s64 state_timer[4];
+#endif
+};
+
+
+void pwrdm_init(struct powerdomain **pwrdm_list);
+
+int pwrdm_register(struct powerdomain *pwrdm);
+int pwrdm_unregister(struct powerdomain *pwrdm);
+struct powerdomain *pwrdm_lookup(const char *name);
+
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+			void *user);
+
+int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
+int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
+			 int (*fn)(struct powerdomain *pwrdm,
+				   struct clockdomain *clkdm));
+
+int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2);
+
+int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
+
+int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
+int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
+
+int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
+int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+
+int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
+int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
+
+int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
+int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
+bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
+
+int pwrdm_wait_transition(struct powerdomain *pwrdm);
+
+int pwrdm_state_switch(struct powerdomain *pwrdm);
+int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
+int pwrdm_pre_transition(void);
+int pwrdm_post_transition(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
new file mode 100644
index 0000000..e63e94e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
+
+#define START_PADCONF_SAVE 0x2
+#define PADCONF_SAVE_DONE  0x1
+
+void omap3_prcm_save_context(void);
+void omap3_prcm_restore_context(void);
+
+#endif
+
+
+
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
new file mode 100644
index 0000000..f704030
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -0,0 +1,151 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG		0x010
+#define SDRC_CS_CFG		0x040
+#define SDRC_SHARING		0x044
+#define SDRC_ERR_TYPE		0x04C
+#define SDRC_DLLA_CTRL		0x060
+#define SDRC_DLLA_STATUS	0x064
+#define SDRC_DLLB_CTRL		0x068
+#define SDRC_DLLB_STATUS	0x06C
+#define SDRC_POWER		0x070
+#define SDRC_MCFG_0		0x080
+#define SDRC_MR_0		0x084
+#define SDRC_EMR2_0		0x08c
+#define SDRC_ACTIM_CTRL_A_0	0x09c
+#define SDRC_ACTIM_CTRL_B_0	0x0a0
+#define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MANUAL_0		0x0a8
+#define SDRC_MCFG_1		0x0B0
+#define SDRC_MR_1		0x0B4
+#define SDRC_EMR2_1		0x0BC
+#define SDRC_ACTIM_CTRL_A_1	0x0C4
+#define SDRC_ACTIM_CTRL_B_1	0x0C8
+#define SDRC_RFR_CTRL_1		0x0D4
+#define SDRC_MANUAL_1		0x0D8
+
+#define SDRC_POWER_AUTOCOUNT_SHIFT	8
+#define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT	4
+#define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg)					\
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)					\
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)					\
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG		0x010
+/* REVISIT: fill in other SMS registers here */
+
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+	unsigned long rate;
+	u32 actim_ctrla;
+	u32 actim_ctrlb;
+	u32 rfr_ctrl;
+	u32 mr;
+};
+
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+	u32 m_type;		/* ddr = 1, sdr = 0 */
+	u32 dll_mode;		/* use lock mode = 1, unlock mode = 0 */
+	u32 slow_dll_ctrl;	/* unlock mode, dll value for slow speed */
+	u32 fast_dll_ctrl;	/* unlock mode, dll value for fast speed */
+	u32 base_cs;		/* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif  /* CONFIG_ARCH_OMAP2 */
+
+#endif  /* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
new file mode 100644
index 0000000..9951345
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -0,0 +1,64 @@
+/*
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE		0xfffb0000
+#define OMAP_UART2_BASE		0xfffb0800
+#define OMAP_UART3_BASE		0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x4806e000
+#elif defined(CONFIG_ARCH_OMAP3)
+/* OMAP3 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x49020000
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x48020000
+#define OMAP_UART4_BASE		0x4806e000
+#endif
+
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+#define OMAP24XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(pt)	({int __ret = 0;			\
+			if ((pt)->port.mapbase == OMAP_UART1_BASE ||	\
+			    (pt)->port.mapbase == OMAP_UART2_BASE ||	\
+			    (pt)->port.mapbase == OMAP_UART3_BASE)	\
+				__ret = 1;				\
+			__ret;						\
+			})
+
+#ifndef __ASSEMBLER__
+extern void __init omap_serial_early_init(void);
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/plat/smp.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/smp.h
rename to arch/arm/plat-omap/include/plat/smp.h
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
new file mode 100644
index 0000000..16a1b45
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern int __init omap_sram_init(void);
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
new file mode 100644
index 0000000..c58a4ef
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -0,0 +1,51 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#include <plat/prcm.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#else
+extern void voiceblue_reset(void);
+#endif
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+				 DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	if (machine_is_voiceblue())
+		voiceblue_reset();
+	else
+		omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	if (!cpu_class_is_omap2())
+		omap1_arch_reset(mode);
+	else
+		omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/plat/tc.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/tc.h
rename to arch/arm/plat-omap/include/plat/tc.h
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/timer-gp.h
rename to arch/arm/plat-omap/include/plat/timer-gp.h
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/plat/timex.h
similarity index 100%
rename from arch/arm/plat-omap/include/mach/timex.h
rename to arch/arm/plat-omap/include/plat/timex.h
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
new file mode 100644
index 0000000..13c305d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <plat/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1		0x08	/* mode definition register */
+#define OMAP_ID_730		0x355F
+#define OMAP_ID_850		0x362C
+#define ID_MASK			0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+	volatile u8 * uart = 0;
+	int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
+	uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+	uart = (volatile u8 *)(OMAP_UART2_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
+	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
+	return;
+#else
+	return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+	/* Determine which serial port to use */
+	do {
+		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
+		unsigned int omap_id = omap_get_id();
+
+		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
+			shift = 0;
+
+		if (check_port(uart, shift))
+			break;
+		/* Silent boot if no serial ports are enabled. */
+		return;
+	} while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+	/*
+	 * Now, xmit each character
+	 */
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
new file mode 100644
index 0000000..33a500e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -0,0 +1,162 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef	__ASM_ARCH_OMAP_USB_H
+#define	__ASM_ARCH_OMAP_USB_H
+
+#include <plat/board.h>
+
+#define OMAP3_HS_USB_PORTS	3
+enum ehci_hcd_omap_mode {
+	EHCI_HCD_OMAP_MODE_UNKNOWN,
+	EHCI_HCD_OMAP_MODE_PHY,
+	EHCI_HCD_OMAP_MODE_TLL,
+};
+
+struct ehci_hcd_omap_platform_data {
+	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+
+	/* have to be valid if phy_reset is true and portx is in phy mode */
+	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE			0xfffb0400
+#define OMAP1_UDC_BASE			0xfffb4000
+#define OMAP1_OHCI_BASE			0xfffba000
+
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP2_UDC_BASE			0x4805e200
+#define OMAP2_OTG_BASE			0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE			OMAP1_OTG_BASE
+#define UDC_BASE			OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE			OMAP2_OTG_BASE
+#define UDC_BASE			OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
+
+extern void usb_musb_init(void);
+
+extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+
+#endif
+
+void omap_usb_init(struct omap_usb_config *pdata);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV				(OTG_BASE + 0x00)
+#define OTG_SYSCON_1			(OTG_BASE + 0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#	define	 OTG_SOFT_RESET		(1 << 1)
+#define OTG_SYSCON_2			(OTG_BASE + 0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL			(OTG_BASE + 0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
+#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+/* OMAP2 */
+#	define	USB_UNIDIR			0x0
+#	define	USB_UNIDIR_TLL			0x1
+#	define	USB_BIDIR			0x2
+#	define	USB_BIDIR_TLL			0x3
+#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
+#	define	USBT2TLL5PI		(1 << 17)
+#	define	USB0PUENACTLOI		(1 << 16)
+#	define	USBSTANDBYCTRL		(1 << 15)
+
+#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index b6defa2..11f5d79 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -13,12 +13,12 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 
-#include <mach/omap730.h>
-#include <mach/omap1510.h>
-#include <mach/omap16xx.h>
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
-#include <mach/omap44xx.h>
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -33,13 +33,13 @@
 		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
 			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
-	if (cpu_is_omap730()) {
-		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-			return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+	if (cpu_is_omap7xx()) {
+		if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
+			return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
 
-		if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
-			return XLATE(p, OMAP730_DSPREG_BASE,
-					OMAP730_DSPREG_START);
+		if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
+			return XLATE(p, OMAP7XX_DSPREG_BASE,
+					OMAP7XX_DSPREG_START);
 	}
 	if (cpu_is_omap15xx()) {
 		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
@@ -114,6 +114,14 @@
 			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
 		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
 			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
+			return XLATE(p, OMAP44XX_EMIF1_PHYS,		\
+							OMAP44XX_EMIF1_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
+			return XLATE(p, OMAP44XX_EMIF2_PHYS,		\
+							OMAP44XX_EMIF2_VIRT);
+		if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
+			return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
 		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
 			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
 		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
@@ -142,7 +150,7 @@
 	if (cpu_class_is_omap1())
 		return __raw_readb(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+		return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readb);
 
@@ -151,7 +159,7 @@
 	if (cpu_class_is_omap1())
 		return __raw_readw(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+		return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readw);
 
@@ -160,7 +168,7 @@
 	if (cpu_class_is_omap1())
 		return __raw_readl(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+		return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readl);
 
@@ -169,7 +177,7 @@
 	if (cpu_class_is_omap1())
 		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writeb);
 
@@ -178,7 +186,7 @@
 	if (cpu_class_is_omap1())
 		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writew);
 
@@ -187,6 +195,6 @@
 	if (cpu_class_is_omap1())
 		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index c799b3b..afd1c27 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -17,8 +17,8 @@
 #include <linux/platform_device.h>
 #include <linux/debugfs.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 94584f1..c0ff1e3 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -20,7 +20,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index dc3fac3..936aef1 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -18,8 +18,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
@@ -392,7 +392,6 @@
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
@@ -427,8 +426,6 @@
 		len -= bytes;
 	}
 	BUG_ON(len);
-
-	clean_dcache_area(va, len);
 }
 
 static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
@@ -449,7 +446,7 @@
 	struct scatterlist *sg;
 	u32 da = new->da_start;
 
-	if (!obj || !new || !sgt)
+	if (!obj || !sgt)
 		return -EINVAL;
 
 	BUG_ON(!sgtable_ok(sgt));
@@ -617,7 +614,7 @@
 		 u32 flags)
 {
 	size_t bytes;
-	void *va;
+	void *va = NULL;
 
 	if (!obj || !obj->dev || !sgt)
 		return -EINVAL;
@@ -627,9 +624,11 @@
 		return -EINVAL;
 	bytes = PAGE_ALIGN(bytes);
 
-	va = vmap_sg(sgt);
-	if (IS_ERR(va))
-		return PTR_ERR(va);
+	if (flags & IOVMF_MMIO) {
+		va = vmap_sg(sgt);
+		if (IS_ERR(va))
+			return PTR_ERR(va);
+	}
 
 	flags &= IOVMF_HW_MASK;
 	flags |= IOVMF_DISCONT;
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 40424ed..8e90633 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -26,55 +26,12 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 
-#include <mach/mailbox.h>
-
-static int enable_seq_bit;
-module_param(enable_seq_bit, bool, 0);
-MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
+#include <plat/mailbox.h>
 
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
-/*
- * Mailbox sequence bit API
- */
-
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message.  */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* any value other than 0 and 1 << 31 */
-	mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* add seq_snd to msg */
-	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
-	/* flip seq_snd */
-	mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox_msg_t seq;
-
-	if (!enable_seq_bit)
-		return 0;
-
-	seq = msg & (1 << 31);
-	if (seq == mbox->seq_rcv)
-		return -1;
-	mbox->seq_rcv = seq;
-	return 0;
-}
+static int mbox_configured;
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
@@ -95,14 +52,6 @@
 }
 
 /* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
 static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 {
 	if (mbox->ops->ack_irq)
@@ -113,17 +62,10 @@
 	return mbox->ops->is_irq(mbox, irq);
 }
 
-/* Mailbox Sequence Bit function */
-void omap_mbox_init_seq(struct omap_mbox *mbox)
-{
-	mbox_seq_init(mbox);
-}
-EXPORT_SYMBOL(omap_mbox_init_seq);
-
 /*
  * message sender
  */
-static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
+static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	int ret = 0, i = 1000;
 
@@ -134,89 +76,49 @@
 			return -1;
 		udelay(1);
 	}
-
-	if (arg && mbox->txq->callback) {
-		ret = mbox->txq->callback(arg);
-		if (ret)
-			goto out;
-	}
-
-	mbox_seq_toggle(mbox, &msg);
 	mbox_fifo_write(mbox, msg);
- out:
 	return ret;
 }
 
-struct omap_msg_tx_data {
-	mbox_msg_t	msg;
-	void		*arg;
-};
 
-static void omap_msg_tx_end_io(struct request *rq, int error)
+int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
-	kfree(rq->special);
-	__blk_put_request(rq->q, rq);
-}
 
-int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
-{
-	struct omap_msg_tx_data *tx_data;
 	struct request *rq;
 	struct request_queue *q = mbox->txq->queue;
 
-	tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
-	if (unlikely(!tx_data))
-		return -ENOMEM;
-
 	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-	if (unlikely(!rq)) {
-		kfree(tx_data);
+	if (unlikely(!rq))
 		return -ENOMEM;
-	}
 
-	tx_data->msg = msg;
-	tx_data->arg = arg;
-	rq->end_io = omap_msg_tx_end_io;
-	blk_insert_request(q, rq, 0, tx_data);
+	blk_insert_request(q, rq, 0, (void *) msg);
+	tasklet_schedule(&mbox->txq->tasklet);
 
-	schedule_work(&mbox->txq->work);
 	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
-static void mbox_tx_work(struct work_struct *work)
+static void mbox_tx_tasklet(unsigned long tx_data)
 {
 	int ret;
 	struct request *rq;
-	struct omap_mbox_queue *mq = container_of(work,
-				struct omap_mbox_queue, work);
-	struct omap_mbox *mbox = mq->queue->queuedata;
+	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
 	struct request_queue *q = mbox->txq->queue;
 
 	while (1) {
-		struct omap_msg_tx_data *tx_data;
 
-		spin_lock(q->queue_lock);
 		rq = blk_fetch_request(q);
-		spin_unlock(q->queue_lock);
 
 		if (!rq)
 			break;
 
-		tx_data = rq->special;
-
-		ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
+		ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special);
 		if (ret) {
-			enable_mbox_irq(mbox, IRQ_TX);
-			spin_lock(q->queue_lock);
+			omap_mbox_enable_irq(mbox, IRQ_TX);
 			blk_requeue_request(q, rq);
-			spin_unlock(q->queue_lock);
 			return;
 		}
-
-		spin_lock(q->queue_lock);
-		__blk_end_request_all(rq, 0);
-		spin_unlock(q->queue_lock);
+		blk_end_request_all(rq, 0);
 	}
 }
 
@@ -233,11 +135,6 @@
 	mbox_msg_t msg;
 	unsigned long flags;
 
-	if (mbox->rxq->callback == NULL) {
-		sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
-		return;
-	}
-
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
 		rq = blk_fetch_request(q);
@@ -254,19 +151,19 @@
 /*
  * Mailbox interrupt handler
  */
-static void mbox_txq_fn(struct request_queue * q)
+static void mbox_txq_fn(struct request_queue *q)
 {
 }
 
-static void mbox_rxq_fn(struct request_queue * q)
+static void mbox_rxq_fn(struct request_queue *q)
 {
 }
 
 static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 {
-	disable_mbox_irq(mbox, IRQ_TX);
+	omap_mbox_disable_irq(mbox, IRQ_TX);
 	ack_mbox_irq(mbox, IRQ_TX);
-	schedule_work(&mbox->txq->work);
+	tasklet_schedule(&mbox->txq->tasklet);
 }
 
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
@@ -275,8 +172,6 @@
 	mbox_msg_t msg;
 	struct request_queue *q = mbox->rxq->queue;
 
-	disable_mbox_irq(mbox, IRQ_RX);
-
 	while (!mbox_fifo_empty(mbox)) {
 		rq = blk_get_request(q, WRITE, GFP_ATOMIC);
 		if (unlikely(!rq))
@@ -284,11 +179,6 @@
 
 		msg = mbox_fifo_read(mbox);
 
-		if (unlikely(mbox_seq_test(mbox, msg))) {
-			pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
-			if (mbox->err_notify)
-				mbox->err_notify();
-		}
 
 		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
@@ -297,7 +187,6 @@
 
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
-	enable_mbox_irq(mbox, IRQ_RX);
 nomem:
 	schedule_work(&mbox->rxq->work);
 }
@@ -315,76 +204,10 @@
 	return IRQ_HANDLED;
 }
 
-/*
- * sysfs files
- */
-static ssize_t
-omap_mbox_write(struct device *dev, struct device_attribute *attr,
-		const char * buf, size_t count)
-{
-	int ret;
-	mbox_msg_t *p = (mbox_msg_t *)buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-
-	for (; count >= sizeof(mbox_msg_t); count -= sizeof(mbox_msg_t)) {
-		ret = omap_mbox_msg_send(mbox, be32_to_cpu(*p), NULL);
-		if (ret)
-			return -EAGAIN;
-		p++;
-	}
-
-	return (size_t)((char *)p - buf);
-}
-
-static ssize_t
-omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	unsigned long flags;
-	struct request *rq;
-	mbox_msg_t *p = (mbox_msg_t *) buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-	struct request_queue *q = mbox->rxq->queue;
-
-	while (1) {
-		spin_lock_irqsave(q->queue_lock, flags);
-		rq = blk_fetch_request(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-
-		if (!rq)
-			break;
-
-		*p = (mbox_msg_t)rq->special;
-
-		blk_end_request_all(rq, 0);
-
-		if (unlikely(mbox_seq_test(mbox, *p))) {
-			pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
-			continue;
-		}
-		p++;
-	}
-
-	pr_debug("%02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]);
-
-	return (size_t) ((char *)p - buf);
-}
-
-static DEVICE_ATTR(mbox, S_IRUGO | S_IWUSR, omap_mbox_read, omap_mbox_write);
-
-static ssize_t mbox_show(struct class *class, char *buf)
-{
-	return sprintf(buf, "mbox");
-}
-
-static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
-
-static struct class omap_mbox_class = {
-	.name = "omap-mailbox",
-};
-
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					request_fn_proc * proc,
-					void (*work) (struct work_struct *))
+					request_fn_proc *proc,
+					void (*work) (struct work_struct *),
+					void (*tasklet)(unsigned long))
 {
 	struct request_queue *q;
 	struct omap_mbox_queue *mq;
@@ -401,8 +224,11 @@
 	q->queuedata = mbox;
 	mq->queue = q;
 
-	INIT_WORK(&mq->work, work);
+	if (work)
+		INIT_WORK(&mq->work, work);
 
+	if (tasklet)
+		tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
 	return mq;
 error:
 	kfree(mq);
@@ -415,18 +241,25 @@
 	kfree(q);
 }
 
-static int omap_mbox_init(struct omap_mbox *mbox)
+static int omap_mbox_startup(struct omap_mbox *mbox)
 {
-	int ret;
+	int ret = 0;
 	struct omap_mbox_queue *mq;
 
 	if (likely(mbox->ops->startup)) {
-		ret = mbox->ops->startup(mbox);
-		if (unlikely(ret))
+		write_lock(&mboxes_lock);
+		if (!mbox_configured)
+			ret = mbox->ops->startup(mbox);
+
+		if (unlikely(ret)) {
+			write_unlock(&mboxes_lock);
 			return ret;
+		}
+		mbox_configured++;
+		write_unlock(&mboxes_lock);
 	}
 
-	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
+	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
 				mbox->name, mbox);
 	if (unlikely(ret)) {
 		printk(KERN_ERR
@@ -434,14 +267,14 @@
 		goto fail_request_irq;
 	}
 
-	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
+	mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_txq;
 	}
 	mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work);
+	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_rxq;
@@ -468,8 +301,14 @@
 
 	free_irq(mbox->irq, mbox);
 
-	if (unlikely(mbox->ops->shutdown))
-		mbox->ops->shutdown(mbox);
+	if (unlikely(mbox->ops->shutdown)) {
+		write_lock(&mboxes_lock);
+		if (mbox_configured > 0)
+			mbox_configured--;
+		if (!mbox_configured)
+			mbox->ops->shutdown(mbox);
+		write_unlock(&mboxes_lock);
+	}
 }
 
 static struct omap_mbox **find_mboxes(const char *name)
@@ -498,7 +337,7 @@
 
 	read_unlock(&mboxes_lock);
 
-	ret = omap_mbox_init(mbox);
+	ret = omap_mbox_startup(mbox);
 	if (ret)
 		return ERR_PTR(-ENODEV);
 
@@ -522,15 +361,6 @@
 	if (mbox->next)
 		return -EBUSY;
 
-	mbox->dev = device_create(&omap_mbox_class,
-				  parent, 0, mbox, "%s", mbox->name);
-	if (IS_ERR(mbox->dev))
-		return PTR_ERR(mbox->dev);
-
-	ret = device_create_file(mbox->dev, &dev_attr_mbox);
-	if (ret)
-		goto err_sysfs;
-
 	write_lock(&mboxes_lock);
 	tmp = find_mboxes(mbox->name);
 	if (*tmp) {
@@ -544,9 +374,6 @@
 	return 0;
 
 err_find:
-	device_remove_file(mbox->dev, &dev_attr_mbox);
-err_sysfs:
-	device_unregister(mbox->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
@@ -562,8 +389,6 @@
 			*tmp = mbox->next;
 			mbox->next = NULL;
 			write_unlock(&mboxes_lock);
-			device_remove_file(mbox->dev, &dev_attr_mbox);
-			device_unregister(mbox->dev);
 			return 0;
 		}
 		tmp = &(*tmp)->next;
@@ -574,23 +399,16 @@
 }
 EXPORT_SYMBOL(omap_mbox_unregister);
 
-static int __init omap_mbox_class_init(void)
+static int __init omap_mbox_init(void)
 {
-	int ret = class_register(&omap_mbox_class);
-	if (!ret)
-		ret = class_create_file(&omap_mbox_class, &class_attr_mbox);
-
-	return ret;
+	return 0;
 }
+module_init(omap_mbox_init);
 
-static void __exit omap_mbox_class_exit(void)
+static void __exit omap_mbox_exit(void)
 {
-	class_remove_file(&omap_mbox_class, &class_attr_mbox);
-	class_unregister(&omap_mbox_class);
 }
-
-subsys_initcall(omap_mbox_class_init);
-module_exit(omap_mbox_class_exit);
+module_exit(omap_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e664b91..2cc1cc3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <mach/dma.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mcbsp.h>
 
 struct omap_mcbsp **mcbsp_ptr;
 int omap_mcbsp_count;
@@ -298,9 +298,7 @@
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	return dma_op_mode;
 }
@@ -318,7 +316,6 @@
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
-		spin_lock_irq(&mcbsp->lock);
 		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
 			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
 					CLOCKACTIVITY(0x02));
@@ -327,7 +324,6 @@
 		} else {
 			syscon |= SIDLEMODE(0x01);
 		}
-		spin_unlock_irq(&mcbsp->lock);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 	}
@@ -1145,9 +1141,7 @@
 	ssize_t len = 0;
 	const char * const *s;
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
 		if (dma_op_mode == i)
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 8d329fb..05aebca 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/spinlock.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index e98f0a2..186bca8 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,9 +22,9 @@
 #include <linux/device.h>
 
 /* Interface documentation is in mach/omap-pm.h */
-#include <mach/omap-pm.h>
+#include <plat/omap-pm.h>
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 struct omap_opp *dsp_opps;
 struct omap_opp *mpu_opps;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 2c409fc..bb16e62 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -82,8 +82,8 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/omap_device.h>
-#include <mach/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
 
 /* These parameters are passed to _omap_device_{de,}activate() */
 #define USE_WAKEUP_LAT			0
@@ -103,21 +103,6 @@
 /* Private functions */
 
 /**
- * _read_32ksynct - read the OMAP 32K sync timer
- *
- * Returns the current value of the 32KiHz synchronization counter.
- * XXX this should be generalized to simply read the system clocksource.
- * XXX this should be moved to a separate synctimer32k.c file
- */
-static u32 _read_32ksynct(void)
-{
-	if (!cpu_class_is_omap2())
-		BUG();
-
-	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
-}
-
-/**
  * _omap_device_activate - increase device readiness
  * @od: struct omap_device *
  * @ignore_lat: increase to latency target (0) or full readiness (1)?
@@ -133,13 +118,13 @@
  */
 static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: activating\n", od->pdev.name);
 
 	while (od->pm_lat_level > 0) {
 		struct omap_device_pm_latency *odpl;
-		int act_lat = 0;
+		unsigned long long act_lat = 0;
 
 		od->pm_lat_level--;
 
@@ -149,20 +134,22 @@
 		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		getnstimeofday(&a);
 
 		/* XXX check return code */
 		odpl->activate_func(od);
 
-		b = _read_32ksynct();
+		getnstimeofday(&b);
 
-		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		act_lat = timespec_to_ns(&c) * NSEC_PER_USEC;
 
 		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+			 "%llu usec\n", od->pdev.name, od->pm_lat_level,
+			 act_lat);
 
 		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
-		     "activate step %d took longer than expected (%d > %d)\n",
+		     "activate step %d took longer than expected (%llu > %d)\n",
 		     od->pdev.name, od->pdev.id, od->pm_lat_level,
 		     act_lat, odpl->activate_lat);
 
@@ -188,13 +175,13 @@
  */
 static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
 
 	while (od->pm_lat_level < od->pm_lats_cnt) {
 		struct omap_device_pm_latency *odpl;
-		int deact_lat = 0;
+		unsigned long long deact_lat = 0;
 
 		odpl = od->pm_lats + od->pm_lat_level;
 
@@ -203,23 +190,24 @@
 		     od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		getnstimeofday(&a);
 
 		/* XXX check return code */
 		odpl->deactivate_func(od);
 
-		b = _read_32ksynct();
+		getnstimeofday(&b);
 
-		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC;
 
 		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 "%llu usec\n", od->pdev.name, od->pm_lat_level,
 			 deact_lat);
 
 		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
-		     "deactivate step %d took longer than expected (%d > %d)\n",
-		     od->pdev.name, od->pdev.id, od->pm_lat_level,
-		     deact_lat, odpl->deactivate_lat);
+		     "deactivate step %d took longer than expected "
+		     "(%llu > %d)\n", od->pdev.name, od->pdev.id,
+		     od->pm_lat_level, deact_lat, odpl->deactivate_lat);
 
 		od->dev_wakeup_lat += odpl->activate_lat;
 
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 75d1f26..3e92366 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,11 +25,11 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/sram.h>
-#include <mach/board.h>
-#include <mach/cpu.h>
+#include <plat/sram.h>
+#include <plat/board.h>
+#include <plat/cpu.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
@@ -41,14 +41,14 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xe3000000
+#define OMAP3_SRAM_VA           0xfe400000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
 #define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
-#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
+#define OMAP4_SRAM_VA		0xfe400000		/*0xfe4f0000*/
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -56,16 +56,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
 
-#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
@@ -396,22 +396,24 @@
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
-void restore_sram_functions(void)
+#ifdef CONFIG_PM
+void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
+	omap_push_sram_idle();
 }
+#endif /* CONFIG_PM */
 
 int __init omap34xx_sram_init(void)
 {
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
-
+	omap_push_sram_idle();
 	return 0;
 }
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 509f2ed..51033a4 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,10 +33,10 @@
 #include <asm/system.h>
 #include <mach/hardware.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
@@ -159,11 +159,14 @@
 		 *  - OTG support on this port not yet written
 		 */
 
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~(7 << 4);
-		if (!is_device)
-			l |= (3 << 1);
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
 
 		return 3 << 16;
 	}
@@ -603,7 +606,12 @@
 	if (config->otg || config->register_dev) {
 		syscon &= ~DEV_IDLE_EN;
 		udc_device.dev.platform_data = config;
-		/* FIXME patch IRQ numbers for omap730 */
+		/* IRQ numbers for omap7xx */
+		if(cpu_is_omap7xx()) {
+			udc_resources[1].start = INT_7XX_USB_GENI;
+			udc_resources[2].start = INT_7XX_USB_NON_ISO;
+			udc_resources[3].start = INT_7XX_USB_ISO;
+		}
 		status = platform_device_register(&udc_device);
 		if (status)
 			pr_debug("can't register UDC device, %d\n", status);
@@ -614,8 +622,8 @@
 	if (config->otg || config->register_host) {
 		syscon &= ~HST_IDLE_EN;
 		ohci_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			ohci_resources[1].start = INT_730_USB_HHC_1;
+		if (cpu_is_omap7xx())
+			ohci_resources[1].start = INT_7XX_USB_HHC_1;
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
@@ -626,8 +634,8 @@
 	if (config->otg) {
 		syscon &= ~OTG_IDLE_EN;
 		otg_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			otg_resources[1].start = INT_730_USB_OTG;
+		if (cpu_is_omap7xx())
+			otg_resources[1].start = INT_7XX_USB_OTG;
 		status = platform_device_register(&otg_device);
 		if (status)
 			pr_debug("can't register OTG device, %d\n", status);
@@ -731,7 +739,7 @@
 
 void __init omap_usb_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
+	if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
similarity index 100%
rename from arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
rename to arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 8931c5f..e139a72 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -159,6 +159,12 @@
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
 # DMA
 
 config S3C_DMA
@@ -178,6 +184,11 @@
 	help
 	  Compile in platform device definitions for HSMMC channel 1
 
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
 config S3C_DEV_I2C1
 	bool
 	help
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3c09109..50444da 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -36,6 +36,7 @@
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index 4d01ef1..619cfa8 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Core clock control support
@@ -337,7 +337,7 @@
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
 
 	clk_xtal.rate = xtal;
 
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c
new file mode 100644
index 0000000..824580b
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc2.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * Copyright (c) 2009 Maurus Cuelenaere
+ *
+ * Based on arch/arm/plat-s3c/dev-hsmmc1.c
+ * original file Copyright (c) 2008 Simtec Electronics
+ *
+ * S3C series device definition for hsmmc device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC2,
+		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC2,
+		.end   = IRQ_HSMMC2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc2_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index 4283728..4c76152 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c0.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 8349c46..d44f791 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c1.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 4e53237..e771e77 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -9,8 +9,12 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
 #include <mach/map.h>
 #include <plat/devs.h>
+#include <plat/nand.h>
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
@@ -28,3 +32,96 @@
 };
 
 EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	size = sizeof(int) * set->nr_chips;
+	if (size) {
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */ 
+
+	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+		return;
+	}
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+		
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (!ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
index c9db75c..a995850 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-s3c/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dma.c
  *
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
index 0f440b9..53a9365 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -33,5 +33,5 @@
 	void	(*startup)(void);
 };
 
-extern int simtec_audio_add(const char *codec_name,
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
 			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-s3c/include/plat/audio.h
index de0e8da..f22d23b 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-s3c/include/plat/audio.h
@@ -1,45 +1,17 @@
-/* arch/arm/mach-s3c2410/include/mach/audio.h
+/* arch/arm/plat-s3c/include/plat/audio.h
  *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
-
-struct s3c24xx_iis_ops {
-	struct module *owner;
-
-	int	(*startup)(struct s3c24xx_iis_ops *me);
-	void	(*shutdown)(struct s3c24xx_iis_ops *me);
-	int	(*suspend)(struct s3c24xx_iis_ops *me);
-	int	(*resume)(struct s3c24xx_iis_ops *me);
-
-	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+	int (*cfg_gpio)(struct platform_device *);
 };
-
-struct s3c24xx_platdata_iis {
-	const char		*codec_clk;
-	struct s3c24xx_iis_ops	*ops;
-	int			(*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 7b982b7..94eb06a 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index fbc3d49..d1131ca 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -12,6 +12,9 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -73,3 +76,6 @@
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 
+extern void (*s5pc1xx_idle)(void);
+
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 0f540ea..932cbbb 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -28,6 +28,9 @@
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
 
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+
 extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
index 34dba98..e429d10 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C DMA support
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
index 214ff56..f8db879 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -70,4 +70,11 @@
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 67450f1..3083df0 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/iic.h
  *
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C - I2C Controller platform_device info
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f9588..0659859 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -55,3 +55,11 @@
 					       int chip);
 };
 
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
new file mode 100644
index 0000000..a60ed0d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
@@ -0,0 +1,235 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
index b2caa4b..238efea 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-s3c/include/plat/regs-nand.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 07659da..abf2fbc 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -67,6 +67,8 @@
 #define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
 #define S3C2412_IISMOD_8BIT		(1 << 0)
 
+#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
+
 #define S3C2412_IISPSR_PSREN		(1 << 15)
 
 #define S3C2412_IISFIC_TXFLUSH		(1 << 15)
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 66af75a..85d8904 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -6,7 +6,7 @@
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
  *
  *  Adapted from:
  *
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index f615308..5319867 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -57,6 +57,7 @@
  */
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -64,11 +65,16 @@
 
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 
 /* Helper function availablity */
 
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -103,6 +109,17 @@
 static inline void s3c6400_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
@@ -140,9 +157,70 @@
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C6410_SETUP_SDHCI */
 
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 39f2555..8eb1f43 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm-check.c
  *  originally in linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 8d97db2..7674706 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c7aca4..20fbf93 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -178,4 +178,11 @@
 	help
 	  Common machine code for SMDK2410 and SMDK2440
 
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
 endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7780d2d..5dee8c1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -55,3 +55,4 @@
 # machine common support
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 0afb217..ac061a1 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock-dclk.c
  *
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index aa11986..9e0e20a 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -198,7 +198,7 @@
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
-	s3c_device_nand.dev.platform_data = &smdk_nand_info;
+	s3c_nand_set_platdata(&smdk_nand_info);
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 4f1b789..2d42efb 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/cpu-freq.c
  *
- * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f046f8c..f65192d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core
@@ -1310,7 +1310,7 @@
 	int channel;
 	int ret;
 
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
 
 	dma_channels = channels;
 
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index c776120..33d421d 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index c2cef61..36aaa10 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -1,6 +1,31 @@
 #ifndef _ARCH_MCI_H
 #define _ARCH_MCI_H
 
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
 struct s3c24xx_mci_pdata {
 	unsigned int	no_wprotect : 1;
 	unsigned int	no_detect : 1;
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index 3bc0a21..1b0f4c3 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index b7acf1a..ea8dea3 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq-om.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f0..ef0f521 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics 
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index da0d321..663b280 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://armlinux.simtec.co.uk/
@@ -35,7 +35,7 @@
 
 #include <plat/pm.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
  *
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 56e5253..3620dd2 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Power Manager (Suspend-To-RAM) support
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index d0a3a14..963fb0b 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index fd45e47f..24993dc 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index ae2e6c6..976002f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
index ff9443b..49f6503 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index dde41f17..7937109 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
  *
- * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 0902afd..a75c0c2 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c
new file mode 100644
index 0000000..6bc832e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/simtec-audio.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Audio setup for various Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/audio-simtec.h>
+#include <plat/devs.h>
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+	unsigned int tmp;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tmp = __raw_readb(BAST_VA_CTRL1);
+	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+	tmp |= BAST_CPLD_CTRL1_LRCDAC;
+	__raw_writeb(tmp, BAST_VA_CTRL1);
+
+	local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+	.name	= our_name,
+	.id	= -1,
+	.dev	= {
+		.parent		= &s3c_device_iis.dev,
+		.platform_data	= &simtec_audio_platdata,
+	},
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *spd)
+{
+	if (!name)
+		name = "tlv320aic23";
+
+	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+	/* copy platform data so the source can be __initdata */
+	if (spd)
+		simtec_audio_platdata = *spd;
+
+	if (has_lr_routing)
+		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+	platform_device_register(&s3c_device_iis);
+	platform_device_register(&simtec_audio_dev);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index b1fdd8394..49796d2 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -107,6 +107,11 @@
 		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
index e6e0843..74c0e83 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/plat-s3c64xx/cpufreq.c
@@ -19,6 +19,7 @@
 
 static struct clk *armclk;
 static struct regulator *vddarm;
+static unsigned long regulator_latency;
 
 #ifdef CONFIG_CPU_S3C6410
 struct s3c64xx_dvfs {
@@ -27,11 +28,10 @@
 };
 
 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1000000 },
-	[1] = { 1000000, 1050000 },
-	[2] = { 1050000, 1100000 },
-	[3] = { 1050000, 1150000 },
-	[4] = { 1250000, 1350000 },
+	[0] = { 1000000, 1150000 },
+	[1] = { 1050000, 1150000 },
+	[2] = { 1100000, 1150000 },
+	[3] = { 1200000, 1350000 },
 };
 
 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
@@ -41,9 +41,9 @@
 	{ 1, 266000 },
 	{ 2, 333000 },
 	{ 2, 400000 },
-	{ 3, 532000 },
-	{ 3, 533000 },
-	{ 4, 667000 },
+	{ 2, 532000 },
+	{ 2, 533000 },
+	{ 3, 667000 },
 	{ 0, CPUFREQ_TABLE_END },
 };
 #endif
@@ -141,7 +141,7 @@
 }
 
 #ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_constrain_voltages(void)
+static void __init s3c64xx_cpufreq_config_regulator(void)
 {
 	int count, v, i, found;
 	struct cpufreq_frequency_table *freq;
@@ -150,11 +150,10 @@
 	count = regulator_count_voltages(vddarm);
 	if (count < 0) {
 		pr_err("cpufreq: Unable to check supported voltages\n");
-		return;
 	}
 
 	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
+	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 			continue;
 
@@ -175,6 +174,10 @@
 
 		freq++;
 	}
+
+	/* Guess based on having to do an I2C/SPI write; in future we
+	 * will be able to query the regulator performance here. */
+	regulator_latency = 1 * 1000 * 1000;
 }
 #endif
 
@@ -206,7 +209,7 @@
 		pr_err("cpufreq: Only frequency scaling available\n");
 		vddarm = NULL;
 	} else {
-		s3c64xx_cpufreq_constrain_voltages();
+		s3c64xx_cpufreq_config_regulator();
 	}
 #endif
 
@@ -217,8 +220,11 @@
 		/* Check for frequencies we can generate */
 		r = clk_round_rate(armclk, freq->frequency * 1000);
 		r /= 1000;
-		if (r != freq->frequency)
+		if (r != freq->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock\n",
+				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
 
 		/* If we have no regulator then assume startup
 		 * frequency is the maximum we can support. */
@@ -230,9 +236,11 @@
 
 	policy->cur = clk_get_rate(armclk) / 1000;
 
-	/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
-	 * write plus clock reprogramming. */
-	policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
+	/* Datasheet says PLL stabalisation time (if we were to use
+	 * the PLLs, which we don't currently) is ~300us worst case,
+	 * but add some fudge.
+	 */
+	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 	if (ret != 0) {
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb..a21a88f 100644
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
@@ -15,9 +15,14 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
 
 #include <plat/devs.h>
-
+#include <plat/audio.h>
+#include <plat/gpio-bank-d.h>
+#include <plat/gpio-bank-e.h>
+#include <plat/gpio-cfg.h>
 
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = {
@@ -66,3 +71,97 @@
 	.resource	  = s3c64xx_iisv4_resource,
 };
 EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 9285929..7785604 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -213,6 +213,11 @@
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit[] = {
 	{
 		.base	= S3C64XX_GPA_BASE,
@@ -269,10 +274,16 @@
 			.base	= S3C64XX_GPM(0),
 			.ngpio	= S3C64XX_GPIO_M_NR,
 			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
 		},
 	},
 };
 
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit2[] = {
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
@@ -297,6 +308,7 @@
 			.base	= S3C64XX_GPL(0),
 			.ngpio	= S3C64XX_GPIO_L_NR,
 			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
 		},
 	},
 };
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
index c47daf7..e22b49f 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -36,18 +36,18 @@
 
 #define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
 #define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S0_V40_DO	(0x05 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
 #define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
 
 #define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
 #define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S1_V40_DO	(0x05 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
 #define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
 
 #define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
 #define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
 
 #define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S2_V40_DO	(0x05 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
 #define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index f81b7b8..ebdf183 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -65,7 +65,7 @@
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
-	int pin;
+	int pin, pin_val;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -109,7 +109,10 @@
 		return -1;
 	}
 
-	shift = (offs / 2) * 4;
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
 	mask = 0x7 << shift;
 
 	ctrl = __raw_readl(reg);
@@ -119,12 +122,18 @@
 
 	/* set the GPIO pin appropriately */
 
-	if (offs < 23)
+	if (offs < 16) {
 		pin = S3C64XX_GPN(offs);
-	else
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
 		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
 
-	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin(pin, pin_val);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
index 5417123..a58c0cc 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -53,3 +53,23 @@
 	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
 }
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(6 + width);
+
+	/* Set all the necessary GPH pins to special-function 1 */
+	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPC pins to special-function 1 */
+	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c..1608e62 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -15,6 +15,9 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S5P_GPIO_CFG_S5PC1XX
 	help
 	  Base platform code for any Samsung S5PC1XX device
 
@@ -34,7 +37,12 @@
 
 # platform specific device setup
 
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC1XX_SETUP_I2C0
 	bool
 	default y
 	help
@@ -43,8 +51,14 @@
 	  Note, currently since i2c0 is always compiled, this setup helper
 	  is always compiled with it.
 
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
 	bool
 	help
 	  Common setup code for i2c bus 1.
+
+config S5PC1XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index f1ecb2c..278f268 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,7 +13,9 @@
 
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
-obj-y				+= irq.o
+obj-y				+= irq.o irq-gpio.o irq-eint.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
 
 # CPU support
 
@@ -22,5 +24,8 @@
 
 # Device setup
 
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
+obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
new file mode 100644
index 0000000..26c21d8
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -0,0 +1,728 @@
+/* linux/arch/arm/plat-s5pc1xx/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * S5PC1XX Base clock support
+ *
+ * Based on plat-s3c64xx/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC100_CLKSRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC100_CLKSRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+static int clk_dummy_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk s5pc100_init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	},
+};
+
+static struct clk s5pc100_init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 0 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+	/* Special Clocks 1 */
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+	int size;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	clkp = s5pc100_init_clocks;
+	size = ARRAY_SIZE(s5pc100_init_clocks);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = s5pc100_init_clocks_disable;
+	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
index 715a733..02baeaa 100644
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -55,6 +55,16 @@
 
 static struct map_desc s5pc1xx_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
 		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
 		.length		= SZ_16,
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
new file mode 100644
index 0000000..bba675d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * S5PC1XX GPIO Configuration.
+ *
+ * Based on plat-s3c64xx/gpio-config.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = 0xffff & (0x3 << shift);
+	drvstr = drvstr >> shift;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
new file mode 100644
index 0000000..facb410
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -0,0 +1,503 @@
+/*
+ * arch/arm/plat-s5pc1xx/gpiolib.c
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC1XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+#define OFF_GPCON	(0x00)
+#define OFF_GPDAT	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The s5pc1xx_gpiolib routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+ */
+
+static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + OFF_GPCON);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + OFF_GPDAT);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + OFF_GPDAT);
+	__raw_writel(con, base + OFF_GPCON);
+	__raw_writel(dat, base + OFF_GPDAT);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+	int base;
+
+	base = chip->base - S5PC100_GPH0(0);
+	if (base == 0)
+		return IRQ_EINT(offset);
+	base = chip->base - S5PC100_GPH1(0);
+	if (base == 0)
+		return IRQ_EINT(8 + offset);
+	base = chip->base - S5PC100_GPH2(0);
+	if (base == 0)
+		return IRQ_EINT(16 + offset);
+	base = chip->base - S5PC100_GPH3(0);
+	if (base == 0)
+		return IRQ_EINT(24 + offset);
+	return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.base	= S5PC100_GPA0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.base	= S5PC100_GPA1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.base	= S5PC100_GPB_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5PC100_GPC_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5PC100_GPD_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5PC100_GPE0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.base	= S5PC100_GPE1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.base	= S5PC100_GPF0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.base	= S5PC100_GPF1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.base	= S5PC100_GPF2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.base	= S5PC100_GPF3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.base	= S5PC100_GPG0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.base	= S5PC100_GPG1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.base	= S5PC100_GPG2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.base	= S5PC100_GPG3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.base	= S5PC100_GPH0_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= S5PC100_GPH1_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= S5PC100_GPH2_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= S5PC100_GPH3_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	}, {
+		.base	= S5PC100_GPI_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5PC100_GPJ0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.base	= S5PC100_GPJ1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.base	= S5PC100_GPJ2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.base	= S5PC100_GPJ3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.base	= S5PC100_GPJ4_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.base	= S5PC100_GPK0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.base	= S5PC100_GPK1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.base	= S5PC100_GPK2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.base	= S5PC100_GPK3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.base	= S5PC100_GPL0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.base	= S5PC100_GPL1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.base	= S5PC100_GPL2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= S5PC100_GPL3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.base	= S5PC100_GPL4_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	},
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc1xx_gpioint;
+extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = s5pc1xx_gpiolib_input;
+	chip->chip.direction_output = s5pc1xx_gpiolib_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+
+	/* Interrupt */
+	if (chip->config == &gpio_cfg) {
+		int i, irq;
+
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+
+		for (i = 0;  i < chip->chip.ngpio; i++) {
+			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+			set_irq_chip(irq, &s5pc1xx_gpioint);
+			set_irq_data(irq, &chip->chip);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	} else if (chip->config == &gpio_cfg_eint)
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
+}
+
+static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s5pc1xx_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips;
+	int nr_chips;
+
+		chips = s5pc100_gpio_chips;
+		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+	/* Interrupt */
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
+
+	return 0;
+}
+core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
new file mode 100644
index 0000000..72ad59f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
+ *
+ * Copyright 2009 Samsung Electronic
+ *
+ * S5PC1XX Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+#ifndef __GPIO_CFG_S5PC1XX_H
+#define __GPIO_CFG_S5PC1XX_H __FILE__
+
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+#define S5P_GPIO_DRVSTR_LV1	0x00
+#define S5P_GPIO_DRVSTR_LV2	0x01
+#define S5P_GPIO_DRVSTR_LV3	0x10
+#define S5P_GPIO_DRVSTR_LV4	0x11
+
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
+
+extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr);
+
+#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
new file mode 100644
index 0000000..33ad267
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * External Interrupt (GPH0 ~ GPH3) control register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
+#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
+#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
+#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
+#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
+#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
+#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
+#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
+#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
+#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
+#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
+#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
+#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
+#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
+#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
+#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
+#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
+#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
+#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
+#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
+#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
+#define S5PC1XX_WKUP_INT_HILEV		(0x01)
+#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
+#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
+#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index f07d8c3..ef87363 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -171,12 +171,21 @@
 #define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
 
+/* External interrupt */
 #define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
 
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
+#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
+#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
+#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
 
-#define NR_IRQS 		(IRQ_EINT(31)+1)
+/* GPIO interrupt */
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/*
+ * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
+ */
+#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
 
 #endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
 
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index 75c8390..c5cc86e 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -13,68 +13,69 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
-#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
 
-#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
-#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
-#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
+/* s5pc100 register for clock */
+#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
+#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
+#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
 
-#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
-#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
-#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
+#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
+#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
+#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
 
-#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
-#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
-#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
-#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
+#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
+#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
+#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
+#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
 
-#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
-#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
-#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
-#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
-#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
+#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
+#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
+#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
+#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
+#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
 
-#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
+#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
 
-#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
+#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
 
-#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
+#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
 
-#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
+#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
 
-#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
+#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
 
-#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
-
-#define S5PC1XX_EPLL_EN     (1<<31)
-#define S5PC1XX_EPLL_MASK   0xffffffff
-#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+/* EPLL_CON */
+#define S5PC100_EPLL_EN			(1<<31)
+#define S5PC100_EPLL_MASK		0xffffffff
+#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
 
 /* CLKSRC0 */
-#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
 #define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
 #define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
 #define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
 #define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
 #define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
 #define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
 
 
 /* CLKSRC1 */
@@ -127,10 +128,9 @@
 #define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
 #define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
 
-
 /* CLKDIV0 */
-#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
 #define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
 #define S5PC100_CLKDIV0_ARM_SHIFT		(4)
 #define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
@@ -141,8 +141,8 @@
 #define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
 
 /* CLKDIV1 */
-#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
 #define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
 #define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
 #define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
@@ -202,7 +202,6 @@
 #define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
 #define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
 
-
 /* HCLKD0/PCLKD0 Clock Gate 0 Registers */
 #define S5PC100_CLKGATE_D00_INTC		(1<<0)
 #define S5PC100_CLKGATE_D00_TZIC		(1<<1)
@@ -295,8 +294,8 @@
 #define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
 
 /* Special Clock Gate 0 Registers */
-#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
 #define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
 #define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
 #define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
@@ -329,89 +328,28 @@
 #define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
 #define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
 
-/* register for power management */
-#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
-#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
-#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
-#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
-#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
-#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
-#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
-#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
-#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
-#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
-#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
-#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
-#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
-#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
-#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
-#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
-#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
-#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
-#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
-#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
-#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
-#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
-#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
-#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
-#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
-#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
-#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
-#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
-#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
-#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
-#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
-#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
-#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
-#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
-#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
-#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
-#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
-#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
-#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
-#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
-#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
-#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
-#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
-#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
-#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
-#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
-#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
-#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
-#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
-#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
+#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
+#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
+#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
+#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
+#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
+#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
+#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
+#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
+#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
+#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
+#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
 
-#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
-#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
-#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
-#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
-#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
-#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
-#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
-#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
-#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
-#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
-#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
-
-#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
-#define S5PC100_CFG_WFI_IDLE	(1<<5)
-#define S5PC100_CFG_WFI_STOP	(2<<5)
-#define S5PC100_CFG_WFI_SLEEP	(3<<5)
-
+#define S5PC100_SWRESET_RESETVAL	0xc100
 #define S5PC100_OTHER_SYS_INT	24
 #define S5PC100_OTHER_STA_TYPE	23
 #define STA_TYPE_EXPON		0
 #define STA_TYPE_SFR		1
 
-#define S5PC100_PWR_STA_EXP_SCALE	0
-#define S5PC100_PWR_STA_CNT		4
-
-#define S5PC100_PWR_STABLE_COUNT	85500
-
 #define S5PC100_SLEEP_CFG_OSC_EN	0
 
 /* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
 #define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
 
 /* MIPI D-PHY Control Register 0 */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
new file mode 100644
index 0000000..43c7bc8
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
+#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
+#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
+#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
+
+#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
+#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
+
+/* PDNEN */
+#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
+#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
+#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
+#define S5PC100_PDNEN_NORMAL	(0 << 0)
+
+/* Common part */
+/* External interrupt base is same at both s5pc100 and s5pc110 */
+#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
+
+#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+
+#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
new file mode 100644
index 0000000..02ffa49
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
@@ -0,0 +1,84 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Jongse Won <jongse.won@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
+
+/* s5pc100 (0xE0108000) register for power management */
+#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
+#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
+#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
+#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
+#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
+#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
+#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
+#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
+#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
+#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
+#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
+#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
+#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
+#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
+#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
+#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
+#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
+#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
+#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
+#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
+#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
+#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
+#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
+#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
+#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
+#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
+#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
+#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
+#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
+#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
+#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
+#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
+#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
+#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
+#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
+#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
+#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
+#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
+#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
+#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
+#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
+#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
+#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
+#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
+#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
+#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
+#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
+#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
+#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
+#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
+
+/* PWR_CFG */
+#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
+#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
+
+/* SLEEP_CFG */
+#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
+
+/* OTHERS */
+#define S5PC100_PMU_INT_DISABLE			(1 << 24)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
index 45e2751..2531f34 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -35,10 +35,9 @@
 extern struct clk clk_hd0;
 extern struct clk clk_pd0;
 extern struct clk clk_54m;
-extern struct clk clk_dout_mpll2;
 extern void s5pc1xx_register_clocks(void);
-extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
 
 /* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
 extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
new file mode 100644
index 0000000..373122f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-eint.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-s5pc1xx/irq-eint.c
+ *
+ *  Copyright 2009 Samsung Electronics Co.
+ *  Byungho Min <bhmin@samsung.com>
+ *  Kyungin Park <kyungmin.park@samsung.com>
+ *
+ * Based on plat-s3c64xx/irq-eint.c
+ *
+ * S5PC1XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-ext.h>
+#include <plat/pm.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-irqtype.h>
+
+/*
+ * bank is a group of external interrupt
+ * bank0 means EINT0 ... EINT7
+ * bank1 means EINT8 ... EINT15
+ * bank2 means EINT16 ... EINT23
+ * bank3 means EINT24 ... EINT31
+ */
+
+static inline int s3c_get_eint(unsigned int irq)
+{
+	int real;
+
+	if (irq < IRQ_EINT16_31)
+		real = (irq - IRQ_EINT0);
+	else
+		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
+
+	return real;
+}
+
+static inline int s3c_get_bank(unsigned int irq)
+{
+	return s3c_get_eint(irq) >> 3;
+}
+
+static inline int s3c_eint_to_bit(unsigned int irq)
+{
+	int real, bit;
+
+	real = s3c_get_eint(irq);
+	bit = 1 << (real & (8 - 1));
+
+	return bit;
+}
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask |= s3c_eint_to_bit(irq);
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask &= ~(s3c_eint_to_bit(irq));
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	u32 bank = s3c_get_bank(irq);
+
+	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	u32 bank = s3c_get_bank(irq);
+	int real = s3c_get_eint(irq);
+	int gpio, shift, sfn;
+	u32 ctrl, con = 0;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		con = S5PC1XX_WKUP_INT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		con = S5PC1XX_WKUP_INT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		con = S5PC1XX_WKUP_INT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		con = S5PC1XX_WKUP_INT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		con = S5PC1XX_WKUP_INT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	gpio = real & (8 - 1);
+	shift = gpio << 2;
+
+	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
+	ctrl &= ~(0x7 << shift);
+	ctrl |= con << shift;
+	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
+
+	switch (real) {
+	case 0 ... 7:
+			gpio = S5PC100_GPH0(gpio);
+		break;
+	case 8 ... 15:
+			gpio = S5PC100_GPH1(gpio);
+		break;
+	case 16 ... 23:
+			gpio = S5PC100_GPH2(gpio);
+		break;
+	case 24 ... 31:
+			gpio = S5PC100_GPH3(gpio);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sfn = S3C_GPIO_SFN(0x2);
+	s3c_gpio_cfgpin(gpio, sfn);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from external interrupts,
+ * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
+	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(16, 23);
+	s3c_irq_demux_eint(24, 31);
+}
+
+/*
+ * Handle EINT0 ... EINT15 at VIC directly
+ */
+static void s3c_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_mask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s3c_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_unmask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE);
+}
+
+static inline void s3c_irq_vic_eint_ack(unsigned int irq)
+{
+	u32 bit;
+	u32 bank = s3c_get_bank(irq);
+
+	bit = s3c_eint_to_bit(irq);
+	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_vic_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_vic_eint_mask(irq);
+	s3c_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s3c_irq_vic_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_vic_eint_mask,
+	.unmask		= s3c_irq_vic_eint_unmask,
+	.mask_ack	= s3c_irq_vic_eint_maskack,
+	.ack		= s3c_irq_vic_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+static int __init s5pc1xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
+		set_irq_chip(irq, &s3c_irq_vic_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
+
+	return 0;
+}
+
+arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
new file mode 100644
index 0000000..fecca7a
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/plat-s5pc1xx/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
+
+#define CON_OFFSET			0x700
+#define MASK_OFFSET			0x900
+#define PEND_OFFSET			0xA00
+#define CON_OFFSET_2			0xE00
+#define MASK_OFFSET_2			0xF00
+#define PEND_OFFSET_2			0xF40
+
+#define GPIOINT_LEVEL_LOW		0x0
+#define GPIOINT_LEVEL_HIGH		0x1
+#define GPIOINT_EDGE_FALLING		0x2
+#define GPIOINT_EDGE_RISING		0x3
+#define GPIOINT_EDGE_BOTH		0x4
+
+static int group_to_con_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+	return group << 2;
+}
+
+static int s5pc1xx_get_start(unsigned int group)
+{
+	switch (group) {
+	case 0: return S5PC100_GPIO_A0_START;
+	case 1: return S5PC100_GPIO_A1_START;
+	case 2: return S5PC100_GPIO_B_START;
+	case 3: return S5PC100_GPIO_C_START;
+	case 4: return S5PC100_GPIO_D_START;
+	case 5: return S5PC100_GPIO_E0_START;
+	case 6: return S5PC100_GPIO_E1_START;
+	case 7: return S5PC100_GPIO_F0_START;
+	case 8: return S5PC100_GPIO_F1_START;
+	case 9: return S5PC100_GPIO_F2_START;
+	case 10: return S5PC100_GPIO_F3_START;
+	case 11: return S5PC100_GPIO_G0_START;
+	case 12: return S5PC100_GPIO_G1_START;
+	case 13: return S5PC100_GPIO_G2_START;
+	case 14: return S5PC100_GPIO_G3_START;
+	case 15: return S5PC100_GPIO_I_START;
+	case 16: return S5PC100_GPIO_J0_START;
+	case 17: return S5PC100_GPIO_J1_START;
+	case 18: return S5PC100_GPIO_J2_START;
+	case 19: return S5PC100_GPIO_J3_START;
+	case 20: return S5PC100_GPIO_J4_START;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_group(unsigned int irq)
+{
+	irq -= S3C_IRQ_GPIO(0);
+
+	switch (irq) {
+	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+		return 0;
+	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+		return 1;
+	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+		return 2;
+	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+		return 3;
+	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+		return 4;
+	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+		return 5;
+	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+		return 6;
+	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+		return 7;
+	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+		return 8;
+	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+		return 9;
+	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+		return 10;
+	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+		return 11;
+	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+		return 12;
+	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+		return 13;
+	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+		return 14;
+	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+		return 15;
+	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+		return 16;
+	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+		return 17;
+	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+		return 18;
+	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+		return 19;
+	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+		return 20;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc1xx_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	pend_offset = group_to_pend_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc1xx_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+{
+	s5pc1xx_gpioint_mask(irq);
+	s5pc1xx_gpioint_ack(irq);
+}
+
+static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	con_offset = group_to_con_offset(group);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	case IRQ_TYPE_EDGE_RISING:
+		type = GPIOINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = GPIOINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = GPIOINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = GPIOINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = GPIOINT_LEVEL_LOW;
+		break;
+	default:
+		BUG();
+	}
+
+
+	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+	value &= ~(0xf << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5pc1xx_gpioint = {
+	.name		= "GPIO",
+	.ack		= s5pc1xx_gpioint_ack,
+	.mask		= s5pc1xx_gpioint_mask,
+	.mask_ack	= s5pc1xx_gpioint_mask_ack,
+	.unmask		= s5pc1xx_gpioint_unmask,
+	.set_type	= s5pc1xx_gpioint_set_type,
+};
+
+void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq, group_end;
+	unsigned int pend, mask;
+
+	group_end = 21;
+
+	for (group = 0; group < group_end; group++) {
+		pend_offset = group_to_pend_offset(group);
+		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group_to_mask_offset(group);
+		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				real_irq = s5pc1xx_get_start(group) + offset;
+				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+			}
+		}
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index 80d6dd9..e44fd04 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -79,7 +79,7 @@
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
 
-	reg &= 0x1f;
+	reg &= 0x1f;  /* mask out pending interrupts */
 	reg |= (1 << 5) << (irq - IRQ_TIMER0);
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index 6b24035..b436d44 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -49,6 +49,7 @@
 #define clk_fin_hpll clk_ext_xtal_mux
 
 #define clk_fout_mpll	clk_mpll
+#define clk_vclk_54m	clk_54m
 
 struct clk_sources {
 	unsigned int	nr_sources;
@@ -67,723 +68,11 @@
 	void __iomem		*reg_source;
 };
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 1;
-}
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
-	.id		= -1,
-	.rate		= 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
-
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
-
-	val = __raw_readl(S5PC1XX_CLK_SRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
-
-	__raw_writel(val, S5PC1XX_CLK_SRC1);
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-struct clk clk_48m = {
-	.name		= "clk_48m",
-	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
-};
-
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-struct clk clk_hpll = {
-	.name		= "hpll",
-	.id		= -1,
-};
-
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
-
-static int s5pc1xx_clk_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
-
-	con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
-
-static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
-
-static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
-
-static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
-
-static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
-}
-
-static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
-
-static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
-
-static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
-
-static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
-}
-
-static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
-
-int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
-}
-
-int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan0",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan1",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	},
-};
-
-static struct clk init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
-
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
-
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
-	},
-
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
-
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
-
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
-	},
-
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
-
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
-
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "keyif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
-
-	/* Audio (D2_0) devices: all disabled */
-
-	/* Special Clocks 1 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
-
-	/* Special Clocks 2 */
-	{
-		.name		= "sclk_tv_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
-	}, {
-		.name		= "sclk_vdac_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
-	}, {
-		.name		= "sclk_spdif",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
-	},
-};
-
-void __init s5pc1xx_register_clocks(void)
-{
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		(clkp->enable)(clkp, 0);
-	}
-
-	s3c_pwmclk_init();
-}
+/* APLL */
 static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
+	.rate		= 27000000,
 };
 
 static struct clk *clk_src_apll_list[] = {
@@ -801,12 +90,305 @@
 		.name		= "mout_apll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
+	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_APLL_MASK,
 	.sources	= &clk_src_apll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
+static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
+	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll_get_rate,
+};
+
+static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
+	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+
+	if (parent < rate)
+		return rate;
+
+	div = (parent / rate) - 1;
+	if (div > S5PC100_CLKDIV0_ARM_MASK)
+		div = S5PC100_CLKDIV0_ARM_MASK;
+
+	return parent / (div + 1);
+}
+
+static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
+
+	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
+		return -EINVAL;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+
+	val = __raw_readl(S5PC100_CLKDIV0);
+	val &= S5PC100_CLKDIV0_ARM_MASK;
+	val |= (div - 1);
+	__raw_writel(val, S5PC100_CLKDIV0);
+
+	return 0;
+}
+
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_dout_apll,
+	.get_rate	= s5pc100_clk_arm_get_rate,
+	.set_rate	= s5pc100_clk_arm_set_rate,
+	.round_rate	= s5pc100_clk_arm_round_rate,
+};
+
+static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
+	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_d0_bus = {
+	.name		= "dout_d0_bus",
+	.id		= -1,
+	.parent		= &clk_arm,
+	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
+	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_pclkd0 = {
+	.name		= "dout_pclkd0",
+	.id		= -1,
+	.parent		= &clk_dout_d0_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_apll2 = {
+	.name		= "dout_apll2",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
+};
+
+/* MPLL */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC100_CLKSRC0,
+};
+
+static struct clk *clkset_am_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_dout_apll2,
+};
+
+static struct clk_sources clk_src_am = {
+	.sources	= clkset_am_list,
+	.nr_sources	= ARRAY_SIZE(clkset_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+	.clk = {
+		.name		= "mout_am",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
+	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
+	.sources	= &clk_src_am,
+	.reg_source	= S5PC100_CLKSRC0,
+};
+
+static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
+	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_d1_bus = {
+	.name		= "dout_d1_bus",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+};
+
+static struct clk *clkset_onenand_list[] = {
+	[0] = &clk_dout_d0_bus,
+	[1] = &clk_dout_d1_bus,
+};
+
+static struct clk_sources clk_src_onenand = {
+	.sources	= clkset_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+	.clk = {
+		.name		= "mout_onenand",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
+	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
+	.sources	= &clk_src_onenand,
+	.reg_source	= S5PC100_CLKSRC0,
+};
+
+static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
+	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_pclkd1 = {
+	.name		= "dout_pclkd1",
+	.id		= -1,
+	.parent		= &clk_dout_d1_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
+	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_cam = {
+	.name		= "dout_cam",
+	.id		= -1,
+	.parent		= &clk_dout_mpll2,
+	.get_rate	= s5pc100_clk_dout_cam_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
+};
+
+/* EPLL */
 static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
@@ -827,91 +409,57 @@
 		.name		= "mout_epll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
 	.sources	= &clk_src_epll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
+/* HPLL */
+static struct clk clk_fout_hpll = {
+	.name		= "fout_hpll",
+	.id		= -1,
 };
 
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+static struct clk *clk_src_hpll_list[] = {
+	[0] = &clk_27m,
+	[1] = &clk_fout_hpll,
 };
 
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
+static struct clk_sources clk_src_hpll = {
+	.sources	= clk_src_hpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+	.clk	= {
+		.name		= "mout_hpll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
-	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
+	.sources	= &clk_src_hpll,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
-};
-
-static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
-
-	return rate;
-}
-
-struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
-};
-
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
-};
-
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
-};
+/* Peripherals */
+/*
+ * The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S5PC100 version, and also
+ * have a common parent divisor so are not included here.
+ */
 
 static inline struct clksrc_clk *to_clksrc(struct clk *clk)
 {
 	return container_of(clk, struct clksrc_clk, clk);
 }
 
-static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -925,7 +473,7 @@
 	return rate;
 }
 
-static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	void __iomem *reg = sclk->reg_divider;
@@ -938,14 +486,14 @@
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
 }
 
-static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	struct clk_sources *srcs = sclk->sources;
@@ -970,7 +518,7 @@
 	return -EINVAL;
 }
 
-static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
 					      unsigned long rate)
 {
 	unsigned long parent_rate = clk_get_rate(clk->parent);
@@ -992,35 +540,466 @@
 	return rate;
 }
 
+static struct clk *clkset_spi_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll2,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_spi = {
+	.sources	= clkset_spi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clksrc_clk clk_spi0 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi1 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi2 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
 static struct clksrc_clk clk_uart_uclk1 = {
 	.clk	= {
 		.name		= "uclk1",
 		.id		= -1,
 		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.set_parent	= s5pc1xx_setparent_clksrc,
-		.get_rate	= s5pc1xx_getrate_clksrc,
-		.set_rate	= s5pc1xx_setrate_clksrc,
-		.round_rate	= s5pc1xx_roundrate_clksrc,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
 	},
 	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
 	.mask		= S5PC100_CLKSRC1_UART_MASK,
 	.sources	= &clkset_uart,
 	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC1XX_CLK_DIV2,
-	.reg_source	= S5PC1XX_CLK_SRC1,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd2 = {
+	.name		= "iis_cdclk2",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd0 = {
+	.name		= "pcm_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd1 = {
+	.name		= "pcm_cdclk1",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd0,
+	&clk_pcm_cd0,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
+	.sources	= &clkset_audio0,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd1,
+	&clk_pcm_cd1,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
+	.sources	= &clkset_audio1,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio2_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd2,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio2 = {
+	.sources	= clkset_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clksrc_clk clk_audio2 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
+	.sources	= &clkset_audio2,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_spdif_list[] = {
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+};
+
+static struct clk_sources clkset_spdif = {
+	.sources	= clkset_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
+};
+
+static struct clksrc_clk clk_spdif = {
+	.clk	= {
+		.name		= "spdif",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
+	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
+	.sources	= &clkset_spdif,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_lcd_fimc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_vclk_54m,
+};
+
+static struct clk_sources clkset_lcd_fimc = {
+	.sources	= clkset_lcd_fimc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
+};
+
+static struct clksrc_clk clk_lcd = {
+	.clk	= {
+		.name		= "lcd",
+		.id		= -1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
+	.mask		= S5PC100_CLKSRC2_LCD_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc0 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc1 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc2 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clk *clkset_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk ,
+};
+
+static struct clk_sources clkset_mmc = {
+	.sources	= clkset_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
+};
+
+static struct clksrc_clk clk_mmc0 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+
+static struct clk *clkset_usbhost_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_48m,
+};
+
+static struct clk_sources clkset_usbhost = {
+	.sources	= clkset_usbhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
+};
+
+static struct clksrc_clk clk_usbhost = {
+	.clk	= {
+		.name		= "usbhost",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
+	.sources	= &clkset_usbhost,
+	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
 };
 
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
 	&clk_mout_apll,
-	&clk_mout_epll,
 	&clk_mout_mpll,
+	&clk_mout_am,
+	&clk_mout_onenand,
+	&clk_mout_epll,
+	&clk_mout_hpll,
+	&clk_spi0,
+	&clk_spi1,
+	&clk_spi2,
 	&clk_uart_uclk1,
+	&clk_audio0,
+	&clk_audio1,
+	&clk_audio2,
+	&clk_spdif,
+	&clk_lcd,
+	&clk_fimc0,
+	&clk_fimc1,
+	&clk_fimc2,
+	&clk_mmc0,
+	&clk_mmc1,
+	&clk_mmc2,
+	&clk_usbhost,
 };
 
-static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
 {
 	struct clk_sources *srcs = clk->sources;
 	u32 clksrc = __raw_readl(clk->reg_source);
@@ -1036,9 +1015,9 @@
 
 	clk->clk.parent = srcs->sources[clksrc];
 
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
+		clk->clk.name, clk->clk.parent->name, clksrc,
+		print_mhz(clk_get_rate(&clk->clk)));
 }
 
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
@@ -1052,20 +1031,16 @@
 	unsigned long hclk;
 	unsigned long pclkd0;
 	unsigned long pclk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long hpll;
-	unsigned long epll;
+	unsigned long apll, mpll, epll, hpll;
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 
-	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
-	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
+	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
 
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
-			__func__, clkdiv0, clkdiv1);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
 
 	xtal_clk = clk_get(NULL, "xtal");
 	BUG_ON(IS_ERR(xtal_clk));
@@ -1075,48 +1050,81 @@
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
 	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
 
-	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
-	       apll, mpll, epll, hpll);
+	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
+		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
+		print_mhz(apll), print_mhz(mpll),
+		print_mhz(epll), print_mhz(hpll));
 
-	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
 	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
 	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
 	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
 	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
 	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
 
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
-	       armclk, hclkd0, pclkd0, hclk, pclk);
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
+		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
+		" PCLK=%ld.%03ld MHz\n",
+		print_mhz(armclk), print_mhz(hclkd0),
+		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
 
 	clk_fout_apll.rate = apll;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
+	clk_fout_hpll.rate = hpll;
 
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
+	clk_f.rate = armclk;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc1xx_set_clksrc(init_parents[ptr]);
+		s5pc100_set_clksrc(init_parents[ptr]);
 }
 
 static struct clk *clks[] __initdata = {
 	&clk_ext_xtal_mux,
+	&clk_mout_apll.clk,
+	&clk_dout_apll,
+	&clk_dout_d0_bus,
+	&clk_dout_pclkd0,
+	&clk_dout_apll2,
+	&clk_mout_mpll.clk,
+	&clk_mout_am.clk,
+	&clk_dout_d1_bus,
+	&clk_mout_onenand.clk,
+	&clk_dout_pclkd1,
+	&clk_dout_mpll2,
+	&clk_dout_cam,
+	&clk_dout_mpll,
 	&clk_mout_epll.clk,
 	&clk_fout_epll,
-	&clk_mout_mpll.clk,
-	&clk_dout_mpll,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_iis_cd2,
+	&clk_pcm_cd0,
+	&clk_pcm_cd1,
+	&clk_spi0.clk,
+	&clk_spi1.clk,
+	&clk_spi2.clk,
 	&clk_uart_uclk1.clk,
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+	&clk_spdif.clk,
+	&clk_lcd.clk,
+	&clk_fimc0.clk,
+	&clk_fimc1.clk,
+	&clk_fimc2.clk,
+	&clk_mmc0.clk,
+	&clk_mmc1.clk,
+	&clk_mmc2.clk,
+	&clk_usbhost.clk,
+	&clk_arm,
 };
 
 void __init s5pc100_register_clocks(void)
@@ -1133,7 +1141,4 @@
 			       clkp->name, ret);
 		}
 	}
-
-	clk_mpll.parent = &clk_mout_mpll.clk;
-	clk_epll.parent = &clk_mout_epll.clk;
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
new file mode 100644
index 0000000..1a63768
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+#define DISR_OFFSET	0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c02..5e4a7c3 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca4..a0a8b4a 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
new file mode 100644
index 0000000..185c894
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+	unsigned int num;
+
+	num = width;
+	/* In case of 8 width, we should decrease the 2 */
+	if (width == 8)
+		num = width - 2;
+
+	end = S5PC100_GPG0(2 + num);
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (width == 8) {
+		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG2(2 + width);
+
+	/* Set all the necessary GPG2 pins to special-function 2 */
+	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG3(2 + width);
+
+	/* Set all the necessary GPG3 pins to special-function 2 */
+	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
new file mode 100644
index 0000000..486a0d6
--- /dev/null
+++ b/arch/arm/plat-samsung/Kconfig
@@ -0,0 +1,17 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+	bool
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	default y
+	help
+	  Base platform code for all Samsung SoC based systems
+
+if PLAT_SAMSUNG
+
+
+endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
new file mode 100644
index 0000000..4478b9f
--- /dev/null
+++ b/arch/arm/plat-samsung/Makefile
@@ -0,0 +1,11 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 94be7bb..07b976d 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Fri Sep 18 21:42:00 2009
+# Last update: Wed Nov 25 22:14:58 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -928,7 +928,7 @@
 palmtc			MACH_PALMTC		PALMTC			918
 omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
 mxc30030evb		MACH_MXC30030EVB	MXC30030EVB		920
-rea_2d			MACH_REA_2D		REA_2D			921
+rea_cpu2		MACH_REA_2D		REA_2D			921
 eti3e524		MACH_TI3E524		TI3E524			922
 ateb9200		MACH_ATEB9200		ATEB9200		923
 auckland		MACH_AUCKLAND		AUCKLAND		924
@@ -2421,3 +2421,118 @@
 mh355			MACH_MH355		MH355			2435
 pc7802			MACH_PC7802		PC7802			2436
 gnet_sgc		MACH_GNET_SGC		GNET_SGC		2437
+einstein15		MACH_EINSTEIN15		EINSTEIN15		2438
+cmpd			MACH_CMPD		CMPD			2439
+davinci_hase1		MACH_DAVINCI_HASE1	DAVINCI_HASE1		2440
+lgeincitephone		MACH_LGEINCITEPHONE	LGEINCITEPHONE		2441
+ea313x			MACH_EA313X		EA313X			2442
+fwbd_39064		MACH_FWBD_39064		FWBD_39064		2443
+fwbd_390128		MACH_FWBD_390128	FWBD_390128		2444
+pelco_moe		MACH_PELCO_MOE		PELCO_MOE		2445
+minimix27		MACH_MINIMIX27		MINIMIX27		2446
+omap3_thunder		MACH_OMAP3_THUNDER	OMAP3_THUNDER		2447
+passionc		MACH_PASSIONC		PASSIONC		2448
+mx27amata		MACH_MX27AMATA		MX27AMATA		2449
+bgat1			MACH_BGAT1		BGAT1			2450
+buzz			MACH_BUZZ		BUZZ			2451
+mb9g20			MACH_MB9G20		MB9G20			2452
+yushan			MACH_YUSHAN		YUSHAN			2453
+lizard			MACH_LIZARD		LIZARD			2454
+omap3polycom		MACH_OMAP3POLYCOM	OMAP3POLYCOM		2455
+smdkv210		MACH_SMDKV210		SMDKV210		2456
+bravo			MACH_BRAVO		BRAVO			2457
+siogentoo1		MACH_SIOGENTOO1		SIOGENTOO1		2458
+siogentoo2		MACH_SIOGENTOO2		SIOGENTOO2		2459
+sm3k			MACH_SM3K		SM3K			2460
+acer_tempo_f900		MACH_ACER_TEMPO_F900	ACER_TEMPO_F900		2461
+sst61vc010_dev		MACH_SST61VC010_DEV	SST61VC010_DEV		2462
+glittertind		MACH_GLITTERTIND	GLITTERTIND		2463
+omap_zoom3		MACH_OMAP_ZOOM3		OMAP_ZOOM3		2464
+omap_3630sdp		MACH_OMAP_3630SDP	OMAP_3630SDP		2465
+cybook2440		MACH_CYBOOK2440		CYBOOK2440		2466
+torino_s		MACH_TORINO_S		TORINO_S		2467
+havana			MACH_HAVANA		HAVANA			2468
+beaumont_11		MACH_BEAUMONT_11	BEAUMONT_11		2469
+vanguard		MACH_VANGUARD		VANGUARD		2470
+s5pc110_draco		MACH_S5PC110_DRACO	S5PC110_DRACO		2471
+cartesio_two		MACH_CARTESIO_TWO	CARTESIO_TWO		2472
+aster			MACH_ASTER		ASTER			2473
+voguesv210		MACH_VOGUESV210		VOGUESV210		2474
+acm500x			MACH_ACM500X		ACM500X			2475
+km9260			MACH_KM9260		KM9260			2476
+nideflexg1		MACH_NIDEFLEXG1		NIDEFLEXG1		2477
+ctera_plug_io		MACH_CTERA_PLUG_IO	CTERA_PLUG_IO		2478
+smartq7			MACH_SMARTQ7		SMARTQ7			2479
+at91sam9g10ek2		MACH_AT91SAM9G10EK2	AT91SAM9G10EK2		2480
+asusp527		MACH_ASUSP527		ASUSP527		2481
+at91sam9g20mpm2		MACH_AT91SAM9G20MPM2	AT91SAM9G20MPM2		2482
+topasa900		MACH_TOPASA900		TOPASA900		2483
+electrum_100		MACH_ELECTRUM_100	ELECTRUM_100		2484
+mx51grb			MACH_MX51GRB		MX51GRB			2485
+xea300			MACH_XEA300		XEA300			2486
+htcstartrek		MACH_HTCSTARTREK	HTCSTARTREK		2487
+lima			MACH_LIMA		LIMA			2488
+csb740			MACH_CSB740		CSB740			2489
+usb_s8815		MACH_USB_S8815		USB_S8815		2490
+watson_efm_plugin	MACH_WATSON_EFM_PLUGIN	WATSON_EFM_PLUGIN	2491
+milkyway		MACH_MILKYWAY		MILKYWAY		2492
+g4evm			MACH_G4EVM		G4EVM			2493
+picomod6		MACH_PICOMOD6		PICOMOD6		2494
+omapl138_hawkboard	MACH_OMAPL138_HAWKBOARD	OMAPL138_HAWKBOARD	2495
+ip6000			MACH_IP6000		IP6000			2496
+ip6010			MACH_IP6010		IP6010			2497
+utm400			MACH_UTM400		UTM400			2498
+omap3_zybex		MACH_OMAP3_ZYBEX	OMAP3_ZYBEX		2499
+wireless_space		MACH_WIRELESS_SPACE	WIRELESS_SPACE		2500
+sx560			MACH_SX560		SX560			2501
+ts41x			MACH_TS41X		TS41X			2502
+elphel10373		MACH_ELPHEL10373	ELPHEL10373		2503
+rhobot			MACH_RHOBOT		RHOBOT			2504
+mx51_refresh		MACH_MX51_REFRESH	MX51_REFRESH		2505
+ls9260			MACH_LS9260		LS9260			2506
+shank			MACH_SHANK		SHANK			2507
+qsd8x50_st1		MACH_QSD8X50_ST1	QSD8X50_ST1		2508
+at91sam9m10ekes		MACH_AT91SAM9M10EKES	AT91SAM9M10EKES		2509
+hiram			MACH_HIRAM		HIRAM			2510
+phy3250			MACH_PHY3250		PHY3250			2511
+ea3250			MACH_EA3250		EA3250			2512
+fdi3250			MACH_FDI3250		FDI3250			2513
+whitestone		MACH_WHITESTONE		WHITESTONE		2514
+at91sam9263nit		MACH_AT91SAM9263NIT	AT91SAM9263NIT		2515
+ccmx51			MACH_CCMX51		CCMX51			2516
+ccmx51js		MACH_CCMX51JS		CCMX51JS		2517
+ccwmx51			MACH_CCWMX51		CCWMX51			2518
+ccwmx51js		MACH_CCWMX51JS		CCWMX51JS		2519
+mini6410		MACH_MINI6410		MINI6410		2520
+tiny6410		MACH_TINY6410		TINY6410		2521
+nano6410		MACH_NANO6410		NANO6410		2522
+at572d940hfnldb		MACH_AT572D940HFNLDB	AT572D940HFNLDB		2523
+htcleo			MACH_HTCLEO		HTCLEO			2524
+avp13			MACH_AVP13		AVP13			2525
+xxsvideod		MACH_XXSVIDEOD		XXSVIDEOD		2526
+vpnext			MACH_VPNEXT		VPNEXT			2527
+swarco_itc3		MACH_SWARCO_ITC3	SWARCO_ITC3		2528
+tx51			MACH_TX51		TX51			2529
+dolby_cat1021		MACH_DOLBY_CAT1021	DOLBY_CAT1021		2530
+mx28evk			MACH_MX28EVK		MX28EVK			2531
+phoenix260		MACH_PHOENIX260		PHOENIX260		2532
+uvaca_stork		MACH_UVACA_STORK	UVACA_STORK		2533
+smartq5			MACH_SMARTQ5		SMARTQ5			2534
+all3078			MACH_ALL3078		ALL3078			2535
+ctera_2bay_ds		MACH_CTERA_2BAY_DS	CTERA_2BAY_DS		2536
+siogentoo3		MACH_SIOGENTOO3		SIOGENTOO3		2537
+epb5000			MACH_EPB5000		EPB5000			2538
+hy9263			MACH_HY9263		HY9263			2539
+acer_tempo_m900		MACH_ACER_TEMPO_M900	ACER_TEMPO_M900		2540
+acer_tempo_dx650	MACH_ACER_TEMPO_DX900	ACER_TEMPO_DX900	2541
+acer_tempo_x960		MACH_ACER_TEMPO_X960	ACER_TEMPO_X960		2542
+acer_eten_v900		MACH_ACER_ETEN_V900	ACER_ETEN_V900		2543
+acer_eten_x900		MACH_ACER_ETEN_X900	ACER_ETEN_X900		2544
+bonnell			MACH_BONNELL		BONNELL			2545
+oht_mx27		MACH_OHT_MX27		OHT_MX27		2546
+htcquartz		MACH_HTCQUARTZ		HTCQUARTZ		2547
+davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
+c3ax03			MACH_C3AX03		C3AX03			2549
+mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
+esyx			MACH_ESYX		ESYX			2551
+bulldog			MACH_BULLDOG		BULLDOG			2553
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 35e3bd9..d856354 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -92,6 +92,7 @@
 	select PERFORMANCE_COUNTERS
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
+	select HAVE_FB_ATMEL
 
 #
 # CPU types
diff --git a/arch/avr32/include/asm/bug.h b/arch/avr32/include/asm/bug.h
index 331d45b..2aa373cc 100644
--- a/arch/avr32/include/asm/bug.h
+++ b/arch/avr32/include/asm/bug.h
@@ -52,7 +52,7 @@
 #define BUG()								\
 	do {								\
 		_BUG_OR_WARN(0);					\
-		for (;;);						\
+		unreachable();						\
 	} while (0)
 
 #define WARN_ON(condition)							\
diff --git a/arch/avr32/include/asm/cacheflush.h b/arch/avr32/include/asm/cacheflush.h
index 6706747..96e5382 100644
--- a/arch/avr32/include/asm/cacheflush.h
+++ b/arch/avr32/include/asm/cacheflush.h
@@ -107,6 +107,7 @@
  * do something here, but only for certain configurations.  No such
  * configurations exist at this time.
  */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(page)		do { } while (0)
 #define flush_dcache_mmap_unlock(page)		do { } while (0)
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index fe863f9..c8d1fae 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 7ee0057..e76bad1 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -295,4 +295,5 @@
 	.long	sys_signalfd
 	.long	sys_ni_syscall		/* 280, was sys_timerfd */
 	.long	sys_eventfd
+	.long	sys_recvmmsg
 	.long	sys_ni_syscall		/* r8 is saturated at nr_syscalls */
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index af03a36..417eaac 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -68,9 +68,11 @@
 #endif
 #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
 # define flush_dcache_range(start,end)		blackfin_dcache_flush_range((start), (end))
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 # define flush_dcache_page(page)		blackfin_dflush_page(page_address(page))
 #else
 # define flush_dcache_range(start,end)		do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 # define flush_dcache_page(page)		do { } while (0)
 #endif
 
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index 1f17021..3946aff 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -225,8 +225,13 @@
 void blackfin_dma_resume(void)
 {
 	int i;
-	for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i)
-		dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+
+	for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
+		dma_ch[i].regs->cfg = 0;
+
+		if (i < MAX_DMA_SUSPEND_CHANNELS)
+			dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+	}
 }
 #endif
 
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index f7b9cdc..b52c1f8 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -38,7 +38,7 @@
 
 #ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
 	d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
+#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
 	d_cache |= CPLB_L1_AOW | CPLB_WT;
 #endif
 #endif
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 430ae39..5cc7e2e 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -151,7 +151,7 @@
 	regs->pc = new_ip;
 	if (current->mm)
 		regs->p5 = current->mm->start_data;
-#ifdef CONFIG_SMP
+#ifndef CONFIG_SMP
 	task_thread_info(current)->l1_task_info.stack_start =
 		(void *)current->mm->context.stack_start;
 	task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp;
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 0982b5d..56b0ba1 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -315,7 +315,7 @@
 			case BFIN_MEM_ACCESS_CORE:
 			case BFIN_MEM_ACCESS_CORE_ONLY:
 				copied = access_process_vm(child, addr, &data,
-				                           to_copy, 0);
+				                           to_copy, 1);
 				if (copied)
 					break;
 
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index e9c6539..2829dd0 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf518/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -70,6 +74,10 @@
 #define ANOMALY_05000461 (1)
 /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
 #define ANOMALY_05000462 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -133,5 +141,7 @@
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 3f90526..02040df 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -1,14 +1,18 @@
 /*
- * File: include/asm-blackfin/mach-bf527/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
  *  - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List
+ *  - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -200,6 +204,10 @@
 #define ANOMALY_05000467 (1)
 /* PLL Latches Incorrect Settings During Reset */
 #define ANOMALY_05000469 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -250,5 +258,7 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index cd83db2..9b3f7a2 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf533/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -202,6 +206,10 @@
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* These anomalies have been "phased" out of analog.com anomaly sheets and are
  * here to show running on older silicon just isn't feasible.
@@ -349,5 +357,7 @@
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index f091ad2..d2c427b 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf537/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -156,6 +160,10 @@
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -202,5 +210,7 @@
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 26b7608..d882b7e 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf538/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -128,6 +132,10 @@
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -176,5 +184,7 @@
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
+#define ANOMALY_05000475 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 52b116a..7d08c75 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf548/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -24,6 +28,8 @@
 #define ANOMALY_05000119 (1)
 /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
 #define ANOMALY_05000122 (1)
+/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */
+#define ANOMALY_05000220 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
@@ -200,6 +206,14 @@
 #define ANOMALY_05000466 (1)
 /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
 #define ANOMALY_05000467 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */
+#define ANOMALY_05000474 (1)
+/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000475 (1)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000099 (0)
@@ -215,7 +229,6 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
-#define ANOMALY_05000220 (0)
 #define ANOMALY_05000227 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000231 (0)
diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S
index 0261a5e..f99f174 100644
--- a/arch/blackfin/mach-bf561/atomic.S
+++ b/arch/blackfin/mach-bf561/atomic.S
@@ -19,6 +19,16 @@
 	\reg\().h = _corelock;
 .endm
 
+.macro safe_testset addr:req, scratch:req
+#if ANOMALY_05000477
+	cli \scratch;
+	testset (\addr);
+	sti \scratch;
+#else
+	testset (\addr);
+#endif
+.endm
+
 /*
  * r0 = address of atomic data to flush and invalidate (32bit).
  *
@@ -33,7 +43,7 @@
 	cli r0;
 	coreslot_loadaddr p0;
 .Lretry_corelock:
-	testset (p0);
+	safe_testset p0, r2;
 	if cc jump .Ldone_corelock;
 	SSYNC(r2);
 	jump .Lretry_corelock
@@ -56,7 +66,7 @@
 	cli r0;
 	coreslot_loadaddr p0;
 .Lretry_corelock_noflush:
-	testset (p0);
+	safe_testset p0, r2;
 	if cc jump .Ldone_corelock_noflush;
 	SSYNC(r2);
 	jump .Lretry_corelock_noflush
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 70da495..5ddc981 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -1,9 +1,13 @@
 /*
- * File: include/asm-blackfin/mach-bf561/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * DO NOT EDIT THIS FILE
+ * This file is under version control at
+ *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
+ * and can be replaced with that version at any time
+ * DO NOT EDIT THIS FILE
  *
- * Copyright (C) 2004-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the ADI BSD license.
+ *   https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd
  */
 
 /* This file should be up to date with:
@@ -213,7 +217,11 @@
 /* Disabling Peripherals with DMA Running May Cause DMA System Instability */
 #define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
 /* False Hardware Error Exception when ISR Context Is Not Restored */
-#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
+/* Temporarily walk around for bug 5423 till this issue is confirmed by
+ * official anomaly document. It looks 05000281 still exists on bf561
+ * v0.5.
+ */
+#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5)
 /* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
 #define ANOMALY_05000283 (1)
 /* Reads Will Receive Incorrect Data under Certain Conditions */
@@ -280,6 +288,12 @@
 #define ANOMALY_05000443 (1)
 /* False Hardware Error when RETI Points to Invalid Memory */
 #define ANOMALY_05000461 (1)
+/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */
+#define ANOMALY_05000473 (1)
+/* Core Hang With L2/L3 Configured in Writeback Cache Mode */
+#define ANOMALY_05000475 (__SILICON_REVISION__ < 4)
+/* TESTSET Instruction Cannot Be Interrupted */
+#define ANOMALY_05000477 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000119 (0)
@@ -304,5 +318,6 @@
 #define ANOMALY_05000450 (0)
 #define ANOMALY_05000465 (0)
 #define ANOMALY_05000467 (0)
+#define ANOMALY_05000474 (0)
 
 #endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 9dbafcd..f2ca211 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -57,3 +57,8 @@
 	 (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
 # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
 #endif
+
+#if ANOMALY_05000475 && \
+	(defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK))
+# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory"
+#endif
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 94a0375..a50637a 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1600,6 +1600,7 @@
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
 	.long _sys_perf_event_open
+	.long _sys_recvmmsg		/* 370 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index d98585f..d92b168 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -276,10 +276,9 @@
 	if (cpu_is_offline(cpu))
 		return;
 
-	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
 	if (!msg)
 		return;
-	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_RESCHEDULE;
 
@@ -305,10 +304,9 @@
 	if (cpus_empty(callmap))
 		return;
 
-	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	msg = kzalloc(sizeof(*msg), GFP_ATOMIC);
 	if (!msg)
 		return;
-	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_CPU_STOP;
 
diff --git a/arch/cris/include/asm/cacheflush.h b/arch/cris/include/asm/cacheflush.h
index cf60e3f..36795bc 100644
--- a/arch/cris/include/asm/cacheflush.h
+++ b/arch/cris/include/asm/cacheflush.h
@@ -12,6 +12,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index 45ec49b..1a4a619 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -62,6 +62,8 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h
index 432a69e..edbac54 100644
--- a/arch/frv/include/asm/cacheflush.h
+++ b/arch/frv/include/asm/cacheflush.h
@@ -47,6 +47,7 @@
 }
 
 /* dcache/icache coherency... */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #ifdef CONFIG_MMU
 extern void flush_dcache_page(struct page *page);
 #else
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 2dea726..a6b2688 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -60,5 +60,7 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 0d4d3e3..5fa3889 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -211,37 +211,6 @@
 	return try_set_cmode(new_cmode)?:*lenp;
 }
 
-static int cmode_sysctl(ctl_table *table,
-			void __user *oldval, size_t __user *oldlenp,
-			void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t oldlen;
-
-		if (get_user(oldlen, oldlenp))
-			return -EFAULT;
-
-		if (oldlen != sizeof(int))
-			return -EINVAL;
-
-		if (put_user(clock_cmode_current, (unsigned __user *)oldval) ||
-		    put_user(sizeof(int), oldlenp))
-			return -EFAULT;
-	}
-	if (newval && newlen) {
-		int new_cmode;
-
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(new_cmode, (int __user *)newval))
-			return -EFAULT;
-
-		return try_set_cmode(new_cmode)?:1;
-	}
-	return 1;
-}
-
 static int try_set_p0(int new_p0)
 {
 	unsigned long flags, clkc;
@@ -314,37 +283,6 @@
 	return try_set_p0(new_p0)?:*lenp;
 }
 
-static int p0_sysctl(ctl_table *table,
-		     void __user *oldval, size_t __user *oldlenp,
-		     void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t oldlen;
-
-		if (get_user(oldlen, oldlenp))
-			return -EFAULT;
-
-		if (oldlen != sizeof(int))
-			return -EINVAL;
-
-		if (put_user(clock_p0_current, (unsigned __user *)oldval) ||
-		    put_user(sizeof(int), oldlenp))
-			return -EFAULT;
-	}
-	if (newval && newlen) {
-		int new_p0;
-
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(new_p0, (int __user *)newval))
-			return -EFAULT;
-
-		return try_set_p0(new_p0)?:1;
-	}
-	return 1;
-}
-
 static int cm_procctl(ctl_table *ctl, int write,
 		      void __user *buffer, size_t *lenp, loff_t *fpos)
 {
@@ -358,87 +296,47 @@
 	return try_set_cm(new_cm)?:*lenp;
 }
 
-static int cm_sysctl(ctl_table *table,
-		     void __user *oldval, size_t __user *oldlenp,
-		     void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t oldlen;
-
-		if (get_user(oldlen, oldlenp))
-			return -EFAULT;
-
-		if (oldlen != sizeof(int))
-			return -EINVAL;
-
-		if (put_user(clock_cm_current, (unsigned __user *)oldval) ||
-		    put_user(sizeof(int), oldlenp))
-			return -EFAULT;
-	}
-	if (newval && newlen) {
-		int new_cm;
-
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(new_cm, (int __user *)newval))
-			return -EFAULT;
-
-		return try_set_cm(new_cm)?:1;
-	}
-	return 1;
-}
-
-
 static struct ctl_table pm_table[] =
 {
 	{
-		.ctl_name	= CTL_PM_SUSPEND,
 		.procname	= "suspend",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0200,
-		.proc_handler	= &sysctl_pm_do_suspend,
+		.proc_handler	= sysctl_pm_do_suspend,
 	},
 	{
-		.ctl_name	= CTL_PM_CMODE,
 		.procname	= "cmode",
 		.data		= &clock_cmode_current,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cmode_procctl,
-		.strategy	= &cmode_sysctl,
+		.proc_handler	= cmode_procctl,
 	},
 	{
-		.ctl_name	= CTL_PM_P0,
 		.procname	= "p0",
 		.data		= &clock_p0_current,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &p0_procctl,
-		.strategy	= &p0_sysctl,
+		.proc_handler	= p0_procctl,
 	},
 	{
-		.ctl_name	= CTL_PM_CM,
 		.procname	= "cm",
 		.data		= &clock_cm_current,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cm_procctl,
-		.strategy	= &cm_sysctl,
+		.proc_handler	= cm_procctl,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static struct ctl_table pm_dir_table[] =
 {
 	{
-		.ctl_name	= CTL_PM,
 		.procname	= "pm",
 		.mode		= 0555,
 		.child		= pm_table,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 /*
diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c
index 3e9d7e0..035516cb 100644
--- a/arch/frv/kernel/sysctl.c
+++ b/arch/frv/kernel/sysctl.c
@@ -176,21 +176,19 @@
 static struct ctl_table frv_table[] =
 {
 	{
-		.ctl_name 	= 1,
 		.procname 	= "cache-mode",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0644,
-		.proc_handler	= &procctl_frv_cachemode,
+		.proc_handler	= procctl_frv_cachemode,
 	},
 #ifdef CONFIG_MMU
 	{
-		.ctl_name	= 2,
 		.procname	= "pin-cxnr",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0644,
-		.proc_handler	= &procctl_frv_pin_cxnr
+		.proc_handler	= procctl_frv_pin_cxnr
 	},
 #endif
 	{}
@@ -203,7 +201,6 @@
 static struct ctl_table frv_dir_table[] =
 {
 	{
-		.ctl_name	= CTL_FRV,
 		.procname	= "frv",
 		.mode 		= 0555,
 		.child		= frv_table
diff --git a/arch/h8300/include/asm/cacheflush.h b/arch/h8300/include/asm/cacheflush.h
index 5ffdca2..4cf2df2 100644
--- a/arch/h8300/include/asm/cacheflush.h
+++ b/arch/h8300/include/asm/cacheflush.h
@@ -15,6 +15,7 @@
 #define	flush_cache_dup_mm(mm)		do { } while (0)
 #define	flush_cache_range(vma,a,b)
 #define	flush_cache_page(vma,p,pfn)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define	flush_dcache_page(page)
 #define	flush_dcache_mmap_lock(mapping)
 #define	flush_dcache_mmap_unlock(mapping)
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 1547f01..04c0f45 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index af9405c..10c3751 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -327,7 +327,7 @@
 	data8 compat_sys_writev
 	data8 sys_getsid
 	data8 sys_fdatasync
-	data8 sys32_sysctl
+	data8 compat_sys_sysctl
 	data8 sys_mlock		  /* 150 */
 	data8 sys_munlock
 	data8 sys_mlockall
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 625ed8f..429ec96 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1628,61 +1628,6 @@
 	return sys_msync(addr, len + (start - addr), flags);
 }
 
-struct sysctl32 {
-	unsigned int	name;
-	int		nlen;
-	unsigned int	oldval;
-	unsigned int	oldlenp;
-	unsigned int	newval;
-	unsigned int	newlen;
-	unsigned int	__unused[4];
-};
-
-#ifdef CONFIG_SYSCTL_SYSCALL
-asmlinkage long
-sys32_sysctl (struct sysctl32 __user *args)
-{
-	struct sysctl32 a32;
-	mm_segment_t old_fs = get_fs ();
-	void __user *oldvalp, *newvalp;
-	size_t oldlen;
-	int __user *namep;
-	long ret;
-
-	if (copy_from_user(&a32, args, sizeof(a32)))
-		return -EFAULT;
-
-	/*
-	 * We need to pre-validate these because we have to disable address checking
-	 * before calling do_sysctl() because of OLDLEN but we can't run the risk of the
-	 * user specifying bad addresses here.  Well, since we're dealing with 32 bit
-	 * addresses, we KNOW that access_ok() will always succeed, so this is an
-	 * expensive NOP, but so what...
-	 */
-	namep = (int __user *) compat_ptr(a32.name);
-	oldvalp = compat_ptr(a32.oldval);
-	newvalp = compat_ptr(a32.newval);
-
-	if ((oldvalp && get_user(oldlen, (int __user *) compat_ptr(a32.oldlenp)))
-	    || !access_ok(VERIFY_WRITE, namep, 0)
-	    || !access_ok(VERIFY_WRITE, oldvalp, 0)
-	    || !access_ok(VERIFY_WRITE, newvalp, 0))
-		return -EFAULT;
-
-	set_fs(KERNEL_DS);
-	lock_kernel();
-	ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *) &oldlen,
-			newvalp, (size_t) a32.newlen);
-	unlock_kernel();
-	set_fs(old_fs);
-
-	if (oldvalp && put_user (oldlen, (int __user *) compat_ptr(a32.oldlenp)))
-		return -EFAULT;
-
-	return ret;
-}
-#endif
-
 asmlinkage long
 sys32_newuname (struct new_utsname __user *name)
 {
diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
index c8ce271..429eefc 100644
--- a/arch/ia64/include/asm/cacheflush.h
+++ b/arch/ia64/include/asm/cacheflush.h
@@ -25,6 +25,7 @@
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)			\
 do {						\
 	clear_bit(PG_arch_1, &(page)->flags);	\
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
index 18a7e49..bc90c75 100644
--- a/arch/ia64/include/asm/kvm.h
+++ b/arch/ia64/include/asm/kvm.h
@@ -60,6 +60,7 @@
 #define KVM_IRQCHIP_PIC_MASTER   0
 #define KVM_IRQCHIP_PIC_SLAVE    1
 #define KVM_IRQCHIP_IOAPIC       2
+#define KVM_NR_IRQCHIPS          3
 
 #define KVM_CONTEXT_SIZE	8*1024
 
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index d9b6325..a362e67 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -475,7 +475,6 @@
 	struct list_head assigned_dev_head;
 	struct iommu_domain *iommu_domain;
 	int iommu_flags;
-	struct hlist_head irq_ack_notifier_list;
 
 	unsigned long irq_sources_bitmap;
 	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 0b0d5ff..51427ea 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -69,4 +69,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/swiotlb.h b/arch/ia64/include/asm/swiotlb.h
index dcbaea7..f0acde6 100644
--- a/arch/ia64/include/asm/swiotlb.h
+++ b/arch/ia64/include/asm/swiotlb.h
@@ -4,8 +4,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/swiotlb.h>
 
-extern int swiotlb_force;
-
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
 extern void pci_swiotlb_init(void);
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 5a5347f..9c72e36 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -311,11 +311,12 @@
 #define __NR_preadv			1319
 #define __NR_pwritev			1320
 #define __NR_rt_tgsigqueueinfo		1321
+#define __NR_rt_recvmmsg		1322
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			298 /* length of syscall table */
+#define NR_syscalls			299 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index 6631a9d..b942f40 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -239,32 +239,29 @@
 #ifdef CONFIG_SYSCTL
 static ctl_table kdump_ctl_table[] = {
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "kdump_on_init",
 		.data = &kdump_on_init,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec,
+		.proc_handler = proc_dointvec,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "kdump_on_fatal_mca",
 		.data = &kdump_on_fatal_mca,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec,
+		.proc_handler = proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table sys_table[] = {
 	{
-	  .ctl_name = CTL_KERN,
 	  .procname = "kernel",
 	  .mode = 0555,
 	  .child = kdump_ctl_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d0e7d37..d75b872 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1806,6 +1806,7 @@
 	data8 sys_preadv
 	data8 sys_pwritev			// 1320
 	data8 sys_rt_tgsigqueueinfo
+	data8 sys_recvmmsg
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c
index 285aae8..53292ab 100644
--- a/arch/ia64/kernel/pci-swiotlb.c
+++ b/arch/ia64/kernel/pci-swiotlb.c
@@ -41,7 +41,7 @@
 void __init swiotlb_dma_init(void)
 {
 	dma_ops = &swiotlb_dma_ops;
-	swiotlb_init();
+	swiotlb_init(1);
 }
 
 void __init pci_swiotlb_init(void)
@@ -51,7 +51,7 @@
 		swiotlb = 1;
 		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
 		machvec_init("dig");
-		swiotlb_init();
+		swiotlb_init(1);
 		dma_ops = &swiotlb_dma_ops;
 #else
 		panic("Unable to find Intel IOMMU");
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index f178270..402698b 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -522,42 +522,37 @@
 
 static ctl_table pfm_ctl_table[]={
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "debug",
 		.data		= &pfm_sysctl.debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0666,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "debug_ovfl",
 		.data		= &pfm_sysctl.debug_ovfl,
 		.maxlen		= sizeof(int),
 		.mode		= 0666,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "fastctxsw",
 		.data		= &pfm_sysctl.fastctxsw,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	=  &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "expert_mode",
 		.data		= &pfm_sysctl.expert_mode,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{}
 };
 static ctl_table pfm_sysctl_dir[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "perfmon",
 		.mode		= 0555,
 		.child		= pfm_ctl_table,
@@ -566,7 +561,6 @@
 };
 static ctl_table pfm_sysctl_root[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= pfm_sysctl_dir,
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 0bb99b7..1089b3e 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -49,7 +49,7 @@
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
 common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-		coalesced_mmio.o irq_comm.o)
+		coalesced_mmio.o irq_comm.o assigned-dev.o)
 
 ifeq ($(CONFIG_IOMMU_API),y)
 common-objs += $(addprefix ../../../virt/kvm/, iommu.o)
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 0ad09f0..5fdeec5 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -124,7 +124,7 @@
 
 static  DEFINE_SPINLOCK(vp_lock);
 
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
 	long  status;
 	long  tmp_base;
@@ -137,7 +137,7 @@
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
 	local_irq_restore(saved_psr);
 	if (slot < 0)
-		return;
+		return -EINVAL;
 
 	spin_lock(&vp_lock);
 	status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -145,7 +145,7 @@
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
-		return ;
+		return -EINVAL;
 	}
 
 	if (!kvm_vsa_base) {
@@ -154,6 +154,8 @@
 	}
 	spin_unlock(&vp_lock);
 	ia64_ptr_entry(0x3, slot);
+
+	return 0;
 }
 
 void kvm_arch_hardware_disable(void *garbage)
@@ -851,8 +853,7 @@
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_IOAPIC:
-		memcpy(&chip->chip.ioapic, ioapic_irqchip(kvm),
-				sizeof(struct kvm_ioapic_state));
+		r = kvm_get_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -868,9 +869,7 @@
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_IOAPIC:
-		memcpy(ioapic_irqchip(kvm),
-				&chip->chip.ioapic,
-				sizeof(struct kvm_ioapic_state));
+		r = kvm_set_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -944,7 +943,7 @@
 {
 	struct kvm *kvm = filp->private_data;
 	void __user *argp = (void __user *)arg;
-	int r = -EINVAL;
+	int r = -ENOTTY;
 
 	switch (ioctl) {
 	case KVM_SET_MEMORY_REGION: {
@@ -985,10 +984,8 @@
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
diff --git a/arch/m32r/include/asm/cacheflush.h b/arch/m32r/include/asm/cacheflush.h
index 78587c9..8e8e045 100644
--- a/arch/m32r/include/asm/cacheflush.h
+++ b/arch/m32r/include/asm/cacheflush.h
@@ -12,6 +12,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -33,6 +34,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
@@ -46,6 +48,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index 3390a86..469787c3 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
index 16bf375..73de7c8 100644
--- a/arch/m68k/include/asm/cacheflush_mm.h
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -128,6 +128,7 @@
 	}
 }
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)		__flush_page_to_ram(page_address(page))
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
index c65f00a..89f1956 100644
--- a/arch/m68k/include/asm/cacheflush_no.h
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -12,6 +12,7 @@
 #define flush_cache_range(vma, start, end)	__flush_cache_all()
 #define flush_cache_page(vma, vmaddr)		do { } while (0)
 #define flush_dcache_range(start,len)		__flush_cache_all()
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index 8c9194b..a6ab663 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -71,6 +71,8 @@
 #define PTRACE_GETFPREGS          14
 #define PTRACE_SETFPREGS          15
 
+#define PTRACE_SINGLEBLOCK	33	/* resume execution until next branch */
+
 #ifdef __KERNEL__
 
 #ifndef PS_S
@@ -82,6 +84,21 @@
 #define instruction_pointer(regs) ((regs)->pc)
 #define profile_pc(regs) instruction_pointer(regs)
 extern void show_regs(struct pt_regs *);
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+struct task_struct;
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#ifdef CONFIG_MMU
+#define arch_has_block_step()	(1)
+extern void user_enable_block_step(struct task_struct *);
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 #endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index eee01cc..9bf49c8 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index b6da388..167e518 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -4,10 +4,12 @@
 #ifndef ASM_OFFSETS_C
 #include <asm/asm-offsets.h>
 #endif
-#include <asm/current.h>
 #include <asm/types.h>
 #include <asm/page.h>
 
+#ifndef __ASSEMBLY__
+#include <asm/current.h>
+
 struct thread_info {
 	struct task_struct	*task;		/* main task structure */
 	unsigned long		flags;
@@ -16,6 +18,7 @@
 	__u32 cpu; /* should always be 0 on m68k */
 	struct restart_block    restart_block;
 };
+#endif /* __ASSEMBLY__ */
 
 #define PREEMPT_ACTIVE		0x4000000
 
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index c5b3363..77fc7c1 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -179,7 +179,11 @@
 	addql	#8,%sp
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	jbra	resume_userspace
+	tstl	%d0
+	jeq	resume_userspace
+	| when single stepping into handler stop at the first insn
+	btst	#6,%curptr@(TASK_INFO+TINFO_FLAGS+2)
+	jeq	resume_userspace
 
 do_delayed_trace:
 	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 41230c5..0529659 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -317,15 +317,12 @@
 	char * filename;
 	struct pt_regs *regs = (struct pt_regs *) &name;
 
-	lock_kernel();
 	filename = getname(name);
 	error = PTR_ERR(filename);
 	if (IS_ERR(filename))
-		goto out;
+		return error;
 	error = do_execve(filename, argv, envp, regs);
 	putname(filename);
-out:
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c
index 2075543..1fc217e 100644
--- a/arch/m68k/kernel/ptrace.c
+++ b/arch/m68k/kernel/ptrace.c
@@ -35,7 +35,9 @@
 #define SR_MASK 0x001f
 
 /* sets the trace bits. */
-#define TRACE_BITS 0x8000
+#define TRACE_BITS 0xC000
+#define T1_BIT 0x8000
+#define T0_BIT 0x4000
 
 /* Find the stack offset for a register, relative to thread.esp0. */
 #define PT_REG(reg)	((long)&((struct pt_regs *)0)->reg)
@@ -44,7 +46,7 @@
 /* Mapping from PT_xxx to the stack offset at which the register is
    saved.  Notice that usp has no stack-slot and needs to be treated
    specially (see get_reg/put_reg below). */
-static int regoff[] = {
+static const int regoff[] = {
 	[0]	= PT_REG(d1),
 	[1]	= PT_REG(d2),
 	[2]	= PT_REG(d3),
@@ -79,6 +81,14 @@
 		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
 	else
 		return 0;
+	/* Need to take stkadj into account. */
+	if (regno == PT_SR || regno == PT_PC) {
+		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
+		addr = (unsigned long *) ((unsigned long)addr + stkadj);
+		/* The sr is actually a 16 bit register.  */
+		if (regno == PT_SR)
+			return *(unsigned short *)addr;
+	}
 	return *addr;
 }
 
@@ -96,6 +106,16 @@
 		addr = (unsigned long *)(task->thread.esp0 + regoff[regno]);
 	else
 		return -1;
+	/* Need to take stkadj into account. */
+	if (regno == PT_SR || regno == PT_PC) {
+		long stkadj = *(long *)(task->thread.esp0 + PT_REG(stkadj));
+		addr = (unsigned long *) ((unsigned long)addr + stkadj);
+		/* The sr is actually a 16 bit register.  */
+		if (regno == PT_SR) {
+			*(unsigned short *)addr = data;
+			return 0;
+		}
+	}
 	*addr = data;
 	return 0;
 }
@@ -105,7 +125,7 @@
  */
 static inline void singlestep_disable(struct task_struct *child)
 {
-	unsigned long tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
 	put_reg(child, PT_SR, tmp);
 	clear_tsk_thread_flag(child, TIF_DELAYED_TRACE);
 }
@@ -118,18 +138,30 @@
 	singlestep_disable(child);
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp | T1_BIT);
+	set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
+}
+
+void user_enable_block_step(struct task_struct *child)
+{
+	unsigned long tmp = get_reg(child, PT_SR) & ~TRACE_BITS;
+	put_reg(child, PT_SR, tmp | T0_BIT);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	singlestep_disable(child);
+}
+
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	unsigned long tmp;
 	int i, ret = 0;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT:	/* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR:
 		if (addr & 3)
@@ -138,8 +170,6 @@
 
 		if (addr >= 0 && addr < 19) {
 			tmp = get_reg(child, addr);
-			if (addr == PT_SR)
-				tmp >>= 16;
 		} else if (addr >= 21 && addr < 49) {
 			tmp = child->thread.fp[addr - 21];
 			/* Convert internal fpu reg representation
@@ -149,16 +179,10 @@
 				tmp = ((tmp & 0xffff0000) << 15) |
 				      ((tmp & 0x0000ffff) << 16);
 		} else
-			break;
+			goto out_eio;
 		ret = put_user(tmp, (unsigned long *)data);
 		break;
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT:	/* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR:	/* write the word at location addr in the USER area */
 		if (addr & 3)
 			goto out_eio;
@@ -166,9 +190,9 @@
 
 		if (addr == PT_SR) {
 			data &= SR_MASK;
-			data <<= 16;
-			data |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
-		} else if (addr >= 0 && addr < 19) {
+			data |= get_reg(child, PT_SR) & ~SR_MASK;
+		}
+		if (addr >= 0 && addr < 19) {
 			if (put_reg(child, addr, data))
 				goto out_eio;
 		} else if (addr >= 21 && addr < 48) {
@@ -185,52 +209,9 @@
 			goto out_eio;
 		break;
 
-	case PTRACE_SYSCALL:	/* continue and stop at next (return from) syscall */
-	case PTRACE_CONT:	/* restart after signal. */
-		if (!valid_signal(data))
-			goto out_eio;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		singlestep_disable(child);
-		wake_up_process(child);
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		if (child->exit_state == EXIT_ZOMBIE) /* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		singlestep_disable(child);
-		wake_up_process(child);
-		break;
-
-	case PTRACE_SINGLESTEP:	/* set the trap flag. */
-		if (!valid_signal(data))
-			goto out_eio;
-
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		tmp = get_reg(child, PT_SR) | (TRACE_BITS << 16);
-		put_reg(child, PT_SR, tmp);
-		set_tsk_thread_flag(child, TIF_DELAYED_TRACE);
-
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		break;
-
 	case PTRACE_GETREGS:	/* Get all gp regs from the child. */
 		for (i = 0; i < 19; i++) {
 			tmp = get_reg(child, i);
-			if (i == PT_SR)
-				tmp >>= 16;
 			ret = put_user(tmp, (unsigned long *)data);
 			if (ret)
 				break;
@@ -245,8 +226,7 @@
 				break;
 			if (i == PT_SR) {
 				tmp &= SR_MASK;
-				tmp <<= 16;
-				tmp |= get_reg(child, PT_SR) & ~(SR_MASK << 16);
+				tmp |= get_reg(child, PT_SR) & ~SR_MASK;
 			}
 			put_reg(child, i, tmp);
 			data += sizeof(long);
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 47eac19..878be5f 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -2,6 +2,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -22,73 +23,37 @@
 
   _etext = .;			/* End of text section */
 
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
+  EXCEPTION_TABLE(16)
 
   RODATA
 
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
+  RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE)
 
-  . = ALIGN(16);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  .bss : { *(.bss) }		/* BSS */
+  BSS_SECTION(0, 0, 0)
 
   _edata = .;			/* End of data section */
 
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  } :data
-  .init.data : { INIT_DATA }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
+  INIT_TEXT_SECTION(PAGE_SIZE) :data
+  INIT_DATA_SECTION(16)
   .m68k_fixup : {
 	__start_fixup = .;
 	*(.m68k_fixup)
 	__stop_fixup = .;
   }
-  SECURITY_INIT
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(8192);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
   NOTES
-  . = ALIGN(8192);
-  __init_end = .;
-
-  .data.init_task : { *(.data.init_task) }	/* The initial task and kernel stack */
+  .init_end : {
+	/* This ALIGN be in a section so that _end is at the end of the
+	   load segment. */
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+  }
 
   _end = . ;
 
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
+  STABS_DEBUG
   .comment 0 : { *(.comment) }
 
   /* Sections to be discarded */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 03efaf0..1ad6b7a 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -2,6 +2,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -23,14 +24,8 @@
 
   _etext = .;			/* End of text section */
 
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	. = ALIGN(16);		/* Exception table */
-	__start___ex_table = .;
-	*(__ex_table)
-	__stop___ex_table = .;
-	} :data
+  EXCEPTION_TABLE(16) :data
+  RW_DATA_SECTION(16, PAGE_SIZE, THREAD_SIZE) :data
   /* End of data goes *here* so that freeing init code works properly. */
   _edata = .;
   NOTES
@@ -38,56 +33,21 @@
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);	/* Init code and data */
 __init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : { INIT_DATA }
-	. = ALIGN(16);
-	__setup_start = .;
-	.init.setup : { *(.init.setup) }
-	__setup_end = .;
-	__initcall_start = .;
-	.initcall.init : {
-		INITCALLS
-	}
-	__initcall_end = .;
-	__con_initcall_start = .;
-	.con_initcall.init : { *(.con_initcall.init) }
-	__con_initcall_end = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 	.m68k_fixup : {
 		__start_fixup = .;
 		*(.m68k_fixup)
 		__stop_fixup = .;
 	}
-	SECURITY_INIT
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	__initramfs_start = .;
-	.init.ramfs : { *(.init.ramfs) }
-	__initramfs_end = .;
-#endif
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
-	.data.init.task : { *(.data.init_task) }
 
-
-  .bss : { *(.bss) }		/* BSS */
+  BSS_SECTION(0, 0, 0)
 
   _end = . ;
 
-  .crap : {
-	/* Stabs debugging sections.  */
-	*(.stab)
-	*(.stabstr)
-	*(.stab.excl)
-	*(.stab.exclstr)
-	*(.stab.index)
-	*(.stab.indexstr)
-	*(.comment)
-	*(.note)
-  }
+  STABS_DEBUG
 
   /* Sections to be discarded */
   DISCARDS
diff --git a/arch/m68knommu/kernel/ptrace.c b/arch/m68knommu/kernel/ptrace.c
index ef70ca0..4d38289 100644
--- a/arch/m68knommu/kernel/ptrace.c
+++ b/arch/m68knommu/kernel/ptrace.c
@@ -86,6 +86,20 @@
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *task)
+{
+	unsigned long srflags;
+	srflags = get_reg(task, PT_SR) | (TRACE_BITS << 16);
+	put_reg(task, PT_SR, srflags);
+}
+
+void user_disable_single_step(struct task_struct *task)
+{
+	unsigned long srflags;
+	srflags = get_reg(task, PT_SR) & ~(TRACE_BITS << 16);
+	put_reg(task, PT_SR, srflags);
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  *
@@ -93,10 +107,8 @@
  */
 void ptrace_disable(struct task_struct *child)
 {
-	unsigned long tmp;
 	/* make sure the single step bit is not set. */
-	tmp = get_reg(child, PT_SR) & ~(TRACE_BITS << 16);
-	put_reg(child, PT_SR, tmp);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index f989d6a..088076e 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -37,6 +37,7 @@
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
 
 #define flush_dcache_range(start, end)	__invalidate_dcache_range(start, end)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 37e6f30..ef3ec1d 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -12,23 +12,15 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
+
 #ifndef _ASM_MICROBLAZE_PROM_H
 #define _ASM_MICROBLAZE_PROM_H
 #ifdef __KERNEL__
-
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
-#define OF_DT_END_NODE		0x2 /* End node */
-#define OF_DT_PROP		0x3 /* Property: name off, size, content */
-#define OF_DT_NOP		0x4 /* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <linux/of_fdt.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
 #include <asm/irq.h>
@@ -41,122 +33,19 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header {
-	u32	magic; /* magic word OF_DT_HEADER */
-	u32	totalsize; /* total size of DT block */
-	u32	off_dt_struct; /* offset to structure */
-	u32	off_dt_strings; /* offset to strings */
-	u32	off_mem_rsvmap; /* offset to memory reserve map */
-	u32	version; /* format version */
-	u32	last_comp_version; /* last compatible version */
-	/* version 2 fields below */
-	u32	boot_cpuid_phys; /* Physical CPU id we're booting on */
-	/* version 3 fields below */
-	u32	dt_strings_size; /* size of the DT strings block */
-	/* version 17 fields below */
-	u32	dt_struct_size; /* size of the DT structure block */
-};
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-};
-
-struct device_node {
-	const char *name;
-	const char *type;
-	phandle	node;
-	phandle linux_phandle;
-	char	*full_name;
-
-	struct	property *properties;
-	struct	property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next; /* next device of same type */
-	struct	device_node *allnext; /* next in list of all nodes */
-	struct	proc_dir_entry *pde; /* this node's proc directory */
-	struct	kref kref;
-	unsigned long _flags;
-	void	*data;
-};
-
 extern struct device_node *of_chosen;
 
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-	return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-	set_bit(flag, &n->_flags);
-}
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-static inline void set_node_proc_entry(struct device_node *dn,
-					struct proc_dir_entry *de)
-{
-	dn->pde = de;
-}
-
 extern struct device_node *allnodes;	/* temporary while merging */
 extern rwlock_t devtree_lock;	/* temporary while merging */
 
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-					const char *uname, int depth,
-					void *data),
-				void *data);
-extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
-					unsigned long *size);
-extern int __init
-		of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
-
 /* For updating the device tree at runtime */
 extern void of_attach_node(struct device_node *);
 extern void of_detach_node(struct device_node *);
 
 /* Other Prototypes */
-extern void finish_device_tree(void);
-extern void unflatten_device_tree(void);
 extern int early_uartlite_console(void);
-extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node *np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node *np, struct property *prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
 
 extern struct resource *request_OF_resource(struct device_node *node,
 				int index, const char *name_postfix);
@@ -166,18 +55,6 @@
  * OF address retreival & translation
  */
 
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-#define of_read_ulong(cell, size)	of_read_number(cell, size)
-
 /* Translate an OF address block into a CPU physical address
  */
 extern u64 of_translate_address(struct device_node *np, const u32 *addr);
@@ -305,12 +182,6 @@
  */
 extern void __iomem *of_iomap(struct device_node *device, int index);
 
-/*
- * NB: This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 697ce30..3091619 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,7 +31,7 @@
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
-#include <asm/prom.h>		/* for OF_DT_HEADER */
+#include <linux/of_fdt.h>		/* for OF_DT_HEADER */
 
 #ifdef CONFIG_MMU
 #include <asm/setup.h> /* COMMAND_LINE_SIZE */
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index c005cc6..b817df1 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -860,29 +860,6 @@
 EXPORT_SYMBOL(of_find_node_by_phandle);
 
 /**
- *	of_find_all_nodes - Get next node in global list
- *	@prev:	Previous node or NULL to start iteration
- *		of_node_put() will be called on it
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	np = prev ? prev->allnext : allnodes;
-	for (; np != NULL; np = np->allnext)
-		if (of_node_get(np))
-			break;
-	of_node_put(prev);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_all_nodes);
-
-/**
  *	of_node_get - Increment refcount of a node
  *	@node:	Node to inc refcount, NULL is supported to
  *		simplify writing of callers
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index ecec191..c1ab1dc 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -371,3 +371,4 @@
 	.long sys_ni_syscall
 	.long sys_rt_tgsigqueueinfo	/* 365 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1aad0d9..fd7620f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -358,7 +358,14 @@
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
-	select SYS_HAS_EARLY_PRINTK
+	#
+	# Disable EARLY_PRINTK for now since it leads to overwritten prom
+	# memory during early boot on some machines.
+	#
+	# See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+	# for a more details discussion
+	#
+	# select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -410,7 +417,14 @@
 	select SGI_HAS_ZILOG
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_R10000
-	select SYS_HAS_EARLY_PRINTK
+	#
+	# Disable EARLY_PRINTK for now since it leads to overwritten prom
+	# memory during early boot on some machines.
+	#
+	# See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+	# for a more details discussion
+	#
+	# select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
       help
@@ -1439,6 +1453,7 @@
 
 config PAGE_SIZE_4KB
 	bool "4kB"
+	depends on !CPU_LOONGSON2
 	help
 	 This option select the standard 4kB Linux page size.  On some
 	 R3000-family processors this is the only available page size.  Using
@@ -1763,7 +1778,7 @@
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on !NUMA
+	depends on !NUMA && !CPU_LOONGSON2
 
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
diff --git a/arch/mips/include/asm/bug.h b/arch/mips/include/asm/bug.h
index 6cf29c2..540c98a 100644
--- a/arch/mips/include/asm/bug.h
+++ b/arch/mips/include/asm/bug.h
@@ -11,9 +11,7 @@
 static inline void __noreturn BUG(void)
 {
 	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
-	/* Fool GCC into thinking the function doesn't return. */
-	while (1)
-		;
+	unreachable();
 }
 
 #define HAVE_ARCH_BUG
diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h
index 03b1d69..40bb9fd 100644
--- a/arch/mips/include/asm/cacheflush.h
+++ b/arch/mips/include/asm/cacheflush.h
@@ -38,6 +38,7 @@
 extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
 extern void __flush_dcache_page(struct page *page);
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 static inline void flush_dcache_page(struct page *page)
 {
 	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h
index a2250f3..c892bfb 100644
--- a/arch/mips/include/asm/mman.h
+++ b/arch/mips/include/asm/mman.h
@@ -75,6 +75,7 @@
 
 #define MADV_MERGEABLE   12		/* KSM may merge identical pages */
 #define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+#define MADV_HWPOISON    100		/* poison a page for testing */
 
 /* compatibility flags */
 #define MAP_FILE	0
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index ae05acc..9de5190 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -80,6 +80,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types
diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h
index fcf5f98..83b5509 100644
--- a/arch/mips/include/asm/system.h
+++ b/arch/mips/include/asm/system.h
@@ -12,6 +12,7 @@
 #ifndef _ASM_SYSTEM_H
 #define _ASM_SYSTEM_H
 
+#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 
@@ -193,10 +194,6 @@
 #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
 #endif
 
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
 {
 	switch (size) {
@@ -205,11 +202,17 @@
 	case 8:
 		return __xchg_u64(ptr, x);
 	}
-	__xchg_called_with_bad_pointer();
+
 	return x;
 }
 
-#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, x)							\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc);				\
+									\
+	((__typeof__(*(ptr)))						\
+		__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))));	\
+})
 
 extern void set_handler(unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);
diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index 8c9dfa9..65c679e 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -355,16 +355,17 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 332)
 #define __NR_perf_event_open		(__NR_Linux + 333)
 #define __NR_accept4			(__NR_Linux + 334)
+#define __NR_recvmmsg			(__NR_Linux + 335)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		334
+#define __NR_Linux_syscalls		335
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		334
+#define __NR_O32_Linux_syscalls		335
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -666,16 +667,17 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 291)
 #define __NR_perf_event_open		(__NR_Linux + 292)
 #define __NR_accept4			(__NR_Linux + 293)
+#define __NR_recvmmsg			(__NR_Linux + 294)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		293
+#define __NR_Linux_syscalls		294
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		293
+#define __NR_64_Linux_syscalls		294
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -981,16 +983,17 @@
 #define __NR_rt_tgsigqueueinfo		(__NR_Linux + 295)
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
+#define __NR_recvmmsg			(__NR_Linux + 298)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		297
+#define __NR_Linux_syscalls		298
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		297
+#define __NR_N32_Linux_syscalls		298
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index b77fefa..1a2793e 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -265,67 +265,6 @@
 }
 #endif
 
-struct sysctl_args32
-{
-	compat_caddr_t name;
-	int nlen;
-	compat_caddr_t oldval;
-	compat_caddr_t oldlenp;
-	compat_caddr_t newval;
-	compat_size_t newlen;
-	unsigned int __unused[4];
-};
-
-#ifdef CONFIG_SYSCTL_SYSCALL
-
-SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
-{
-	struct sysctl_args32 tmp;
-	int error;
-	size_t oldlen;
-	size_t __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		if (get_user(oldlen, (u32 __user *)A(tmp.oldlenp)) ||
-		    put_user(oldlen, (size_t __user *)addr))
-			return -EFAULT;
-		oldlenp = (size_t __user *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl((int __user *)A(tmp.name), tmp.nlen, (void __user *)A(tmp.oldval),
-			  oldlenp, (void __user *)A(tmp.newval), tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t __user *)addr) ||
-			    put_user(oldlen, (u32 __user *)A(tmp.oldlenp)))
-				error = -EFAULT;
-		}
-		copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
-	}
-	return error;
-}
-
-#else
-
-SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_SYSCTL_SYSCALL */
-
 SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name)
 {
 	int ret = 0;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index fd2a9bb..17202bb 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -583,6 +583,7 @@
 	sys	sys_rt_tgsigqueueinfo	4
 	sys	sys_perf_event_open	5
 	sys	sys_accept4		4
+	sys     sys_recvmmsg            5
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 18bf7f3..a8a6c59 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -420,4 +420,5 @@
 	PTR	sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     sys_recvmmsg
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 6ebc079..66b5a48 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -272,7 +272,7 @@
 	PTR	sys_munlockall
 	PTR	sys_vhangup			/* 6150 */
 	PTR	sys_pivot_root
-	PTR	sys_32_sysctl
+	PTR	compat_sys_sysctl
 	PTR	sys_prctl
 	PTR	compat_sys_adjtimex
 	PTR	compat_sys_setrlimit		/* 6155 */
@@ -418,4 +418,5 @@
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     compat_sys_recvmmsg
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 14dde4c..515f9ea 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -356,7 +356,7 @@
 	PTR	sys_ni_syscall			/* 4150 */
 	PTR	sys_getsid
 	PTR	sys_fdatasync
-	PTR	sys_32_sysctl
+	PTR	compat_sys_sysctl
 	PTR	sys_mlock
 	PTR	sys_munlock			/* 4155 */
 	PTR	sys_mlockall
@@ -538,4 +538,5 @@
 	PTR	compat_sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     compat_sys_recvmmsg
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 3fe1fcf..fe0d798 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -306,6 +306,7 @@
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__ (
+		"	.set	mips3					\n"
 		"	li	%[err], 0				\n"
 		"1:	ll	%[old], (%[addr])			\n"
 		"	move	%[tmp], %[new]				\n"
@@ -320,6 +321,7 @@
 		"	"STR(PTR)"	1b, 4b				\n"
 		"	"STR(PTR)"	2b, 4b				\n"
 		"	.previous					\n"
+		"	.set	mips0					\n"
 		: [old] "=&r" (old),
 		  [err] "=&r" (err),
 		  [tmp] "=&r" (tmp)
@@ -329,6 +331,7 @@
 		: "memory");
 	} else if (cpu_has_llsc) {
 		__asm__ __volatile__ (
+		"	.set	mips3					\n"
 		"	li	%[err], 0				\n"
 		"1:	ll	%[old], (%[addr])			\n"
 		"	move	%[tmp], %[new]				\n"
@@ -347,6 +350,7 @@
 		"	"STR(PTR)"	1b, 5b				\n"
 		"	"STR(PTR)"	2b, 5b				\n"
 		"	.previous					\n"
+		"	.set	mips0					\n"
 		: [old] "=&r" (old),
 		  [err] "=&r" (err),
 		  [tmp] "=&r" (tmp)
diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c
index b3deed8..14b9a28 100644
--- a/arch/mips/lasat/sysctl.c
+++ b/arch/mips/lasat/sysctl.c
@@ -37,23 +37,6 @@
 #include "ds1603.h"
 #endif
 
-/* Strategy function to write EEPROM after changing string entry */
-int sysctl_lasatstring(ctl_table *table,
-		void *oldval, size_t *oldlenp,
-		void *newval, size_t newlen)
-{
-	int r;
-
-	r = sysctl_string(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-
-	if (newval && newlen)
-		lasat_write_eeprom_info();
-
-	return 0;
-}
-
 
 /* And the same for proc */
 int proc_dolasatstring(ctl_table *table, int write,
@@ -113,46 +96,6 @@
 }
 #endif
 
-/* Sysctl for setting the IP addresses */
-int sysctl_lasat_intvec(ctl_table *table,
-		    void *oldval, size_t *oldlenp,
-		    void *newval, size_t newlen)
-{
-	int r;
-
-	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-
-	if (newval && newlen)
-		lasat_write_eeprom_info();
-
-	return 0;
-}
-
-#ifdef CONFIG_DS1603
-/* Same for RTC */
-int sysctl_lasat_rtc(ctl_table *table,
-		    void *oldval, size_t *oldlenp,
-		    void *newval, size_t newlen)
-{
-	struct timespec ts;
-	int r;
-
-	read_persistent_clock(&ts);
-	rtctmp = ts.tv_sec;
-	if (rtctmp < 0)
-		rtctmp = 0;
-	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-	if (newval && newlen)
-		rtc_mips_set_mmss(rtctmp);
-
-	return r;
-}
-#endif
-
 #ifdef CONFIG_INET
 int proc_lasat_ip(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
@@ -214,23 +157,6 @@
 }
 #endif
 
-static int sysctl_lasat_prid(ctl_table *table,
-				     void *oldval, size_t *oldlenp,
-				     void *newval, size_t newlen)
-{
-	int r;
-
-	r = sysctl_intvec(table, oldval, oldlenp, newval, newlen);
-	if (r < 0)
-		return r;
-	if (newval && newlen) {
-		lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-		lasat_write_eeprom_info();
-		lasat_init_board_info();
-	}
-	return 0;
-}
-
 int proc_lasat_prid(ctl_table *table, int write,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -252,115 +178,92 @@
 
 static ctl_table lasat_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "cpu-hz",
 		.data		= &lasat_board_info.li_cpu_hz,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "bus-hz",
 		.data		= &lasat_board_info.li_bus_hz,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "bmid",
 		.data		= &lasat_board_info.li_bmid,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "prid",
 		.data		= &lasat_board_info.li_prid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_prid,
-		.strategy	= &sysctl_lasat_prid
-	},
+		.proc_handler	= proc_lasat_prid,
+.	},
 #ifdef CONFIG_INET
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "ipaddr",
 		.data		= &lasat_board_info.li_eeprom_info.ipaddr,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_ip,
-		.strategy	= &sysctl_lasat_intvec
+		.proc_handler	= proc_lasat_ip,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "netmask",
 		.data		= &lasat_board_info.li_eeprom_info.netmask,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_ip,
-		.strategy	= &sysctl_lasat_intvec
+		.proc_handler	= proc_lasat_ip,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "passwd_hash",
 		.data		= &lasat_board_info.li_eeprom_info.passwd_hash,
 		.maxlen		=
 			sizeof(lasat_board_info.li_eeprom_info.passwd_hash),
 		.mode		= 0600,
-		.proc_handler	= &proc_dolasatstring,
-		.strategy	= &sysctl_lasatstring
+		.proc_handler	= proc_dolasatstring,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "boot-service",
 		.data		= &lasat_boot_to_service,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_DS1603
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "rtc",
 		.data		= &rtctmp,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dolasatrtc,
-		.strategy	= &sysctl_lasat_rtc
+		.proc_handler	= proc_dolasatrtc,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "namestr",
 		.data		= &lasat_board_info.li_namestr,
 		.maxlen		= sizeof(lasat_board_info.li_namestr),
 		.mode		= 0444,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string
+		.proc_handler	= proc_dostring,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "typestr",
 		.data		= &lasat_board_info.li_typestr,
 		.maxlen		= sizeof(lasat_board_info.li_typestr),
 		.mode		= 0444,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string
+		.proc_handler	= proc_dostring,
 	},
 	{}
 };
 
 static ctl_table lasat_root_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "lasat",
 		.mode		=  0555,
 		.child		= lasat_table
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 9f40e1f..041fc1a 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -110,7 +110,6 @@
 static struct platform_device korina_dev0 = {
 	.id = -1,
 	.name = "korina",
-	.dev.driver_data = &korina_dev0_data,
 	.resource = korina_dev0_res,
 	.num_resources = ARRAY_SIZE(korina_dev0_res),
 };
@@ -332,6 +331,8 @@
 	/* set the uart clock to the current cpu frequency */
 	rb532_uart_res[0].uartclk = idt_cpu_freq;
 
+	dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data);
+
 	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
 }
 
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
index 1a55d61..29e692f 100644
--- a/arch/mn10300/include/asm/cacheflush.h
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -26,6 +26,7 @@
 #define flush_cache_page(vma, vmaddr, pfn)	do {} while (0)
 #define flush_cache_vmap(start, end)		do {} while (0)
 #define flush_cache_vunmap(start, end)		do {} while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do {} while (0)
 #define flush_dcache_mmap_lock(mapping)		do {} while (0)
 #define flush_dcache_mmap_unlock(mapping)	do {} while (0)
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 4df75af..4e60c42 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 7243951..7a73b61 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -42,6 +42,7 @@
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 
 #define flush_dcache_mmap_lock(mapping) \
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 960b1e5..225b7d6 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -59,6 +59,8 @@
 #define SO_TIMESTAMPING		0x4020
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             0x4021
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 561388b..76d23ec 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -90,77 +90,6 @@
     return -ENOSYS;
 }
 
-#ifdef CONFIG_SYSCTL
-
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
-{
-#ifndef CONFIG_SYSCTL_SYSCALL
-	return -ENOSYS;
-#else
-	struct __sysctl_args32 tmp;
-	int error;
-	unsigned int oldlen32;
-	size_t oldlen, __user *oldlenp = NULL;
-	unsigned long addr = (((long __force)&args->__unused[0]) + 7) & ~7;
-
-	DBG(("sysctl32(%p)\n", args));
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		/* a possibly better hack than this, which will avoid the
-		 * problem if the struct is read only, is to push the
-		 * 'oldlen' value out to the user's stack instead. -PB
-		 */
-		if (get_user(oldlen32, (u32 *)(u64)tmp.oldlenp))
-			return -EFAULT;
-		oldlen = oldlen32;
-		if (put_user(oldlen, (size_t *)addr))
-			return -EFAULT;
-		oldlenp = (size_t *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl((int __user *)(u64)tmp.name, tmp.nlen,
-			  (void __user *)(u64)tmp.oldval, oldlenp,
-			  (void __user *)(u64)tmp.newval, tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t *)addr)) {
-				error = -EFAULT;
-			} else {
-				oldlen32 = oldlen;
-				if (put_user(oldlen32, (u32 *)(u64)tmp.oldlenp))
-					error = -EFAULT;
-			}
-		}
-		if (copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused)))
-			error = -EFAULT;
-	}
-	return error;
-#endif
-}
-
-#endif /* CONFIG_SYSCTL */
-
 asmlinkage long sys32_sched_rr_get_interval(pid_t pid,
 	struct compat_timespec __user *interval)
 {
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 843f423..01c4fcf 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -234,7 +234,7 @@
 	ENTRY_SAME(getsid)
 	ENTRY_SAME(fdatasync)
 	/* struct __sysctl_args is a mess */
-	ENTRY_DIFF(sysctl)
+	ENTRY_COMP(sysctl)
 	ENTRY_SAME(mlock)		/* 150 */
 	ENTRY_SAME(munlock)
 	ENTRY_SAME(mlockall)
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c
index 69dad5a..a36799e 100644
--- a/arch/parisc/kernel/unwind.c
+++ b/arch/parisc/kernel/unwind.c
@@ -28,7 +28,7 @@
 #define dbg(x...)
 #endif
 
-#define KERNEL_START (KERNEL_BINARY_TEXT_START - 0x1000)
+#define KERNEL_START (KERNEL_BINARY_TEXT_START)
 
 extern struct unwind_table_entry __start___unwind[];
 extern struct unwind_table_entry __stop___unwind[];
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index fda4baa..9dab4a4 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -78,9 +78,6 @@
 	 */
 	. = ALIGN(PAGE_SIZE);
 	data_start = .;
-	EXCEPTION_TABLE(16)
-
-	NOTES
 
 	/* unwind info */
 	.PARISC.unwind : {
@@ -89,6 +86,9 @@
 		__stop___unwind = .;
 	}
 
+	EXCEPTION_TABLE(16)
+	NOTES
+
 	/* Data */
 	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 3b10051..bf3382f 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -46,7 +46,7 @@
 
 config HCALL_STATS
 	bool "Hypervisor call instrumentation"
-	depends on PPC_PSERIES && DEBUG_FS
+	depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
 	help
 	  Adds code to keep track of the number of hypervisor calls made and
 	  the amount of time spent in hypervisor calls.  Wall time spent in
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index f1889ab..c568329 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1683,7 +1683,7 @@
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HCALL_STATS=y
+# CONFIG_HCALL_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ba667a383..ab9e402 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -25,6 +25,7 @@
 #define flush_cache_vmap(start, end)		do { } while (0)
 #define flush_cache_vunmap(start, end)		do { } while (0)
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/powerpc/include/asm/emulated_ops.h b/arch/powerpc/include/asm/emulated_ops.h
index 9154e85..f0fb4fc 100644
--- a/arch/powerpc/include/asm/emulated_ops.h
+++ b/arch/powerpc/include/asm/emulated_ops.h
@@ -19,6 +19,7 @@
 #define _ASM_POWERPC_EMULATED_OPS_H
 
 #include <asm/atomic.h>
+#include <linux/perf_event.h>
 
 
 #ifdef CONFIG_PPC_EMULATED_STATS
@@ -57,7 +58,7 @@
 
 extern void ppc_warn_emulated_print(const char *type);
 
-#define PPC_WARN_EMULATED(type)						 \
+#define __PPC_WARN_EMULATED(type)					 \
 	do {								 \
 		atomic_inc(&ppc_emulated.type.val);			 \
 		if (ppc_warn_emulated)					 \
@@ -66,8 +67,22 @@
 
 #else /* !CONFIG_PPC_EMULATED_STATS */
 
-#define PPC_WARN_EMULATED(type)	do { } while (0)
+#define __PPC_WARN_EMULATED(type)	do { } while (0)
 
 #endif /* !CONFIG_PPC_EMULATED_STATS */
 
+#define PPC_WARN_EMULATED(type, regs)					\
+	do {								\
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,		\
+			1, 0, regs, 0);					\
+		__PPC_WARN_EMULATED(type);				\
+	} while (0)
+
+#define PPC_WARN_ALIGNMENT(type, regs)					\
+	do {								\
+		perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,		\
+			1, 0, regs, regs->dar);				\
+		__PPC_WARN_EMULATED(type);				\
+	} while (0)
+
 #endif /* _ASM_POWERPC_EMULATED_OPS_H */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 3bf38af..f027581 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -287,6 +287,8 @@
 	unsigned long	num_calls;	/* number of calls (on this CPU) */
 	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
 	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
+	unsigned long	tb_start;
+	unsigned long	purr_start;
 };
 #define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
 
diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
index 131011b..01d7182 100644
--- a/arch/powerpc/include/asm/pmac_low_i2c.h
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
@@ -72,11 +72,7 @@
 extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
 extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
 
-/* i2c layer adapter attach/detach */
-extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
-				    struct i2c_adapter *adapter);
-extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
-				    struct i2c_adapter *adapter);
+/* i2c layer adapter helpers */
 extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
 extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
 
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index 6ff0418..2ab9cbd 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -1,3 +1,4 @@
+#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
 #ifndef _POWERPC_PROM_H
 #define _POWERPC_PROM_H
 #ifdef __KERNEL__
@@ -16,6 +17,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/types.h>
+#include <linux/of_fdt.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
 #include <asm/irq.h>
@@ -28,133 +30,14 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed	/* marker */
-#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
-#define OF_DT_END_NODE		0x2		/* End node */
-#define OF_DT_PROP		0x3		/* Property: name off, size,
-						 * content */
-#define OF_DT_NOP		0x4		/* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
-/*
- * This is what gets passed to the kernel by prom_init or kexec
- *
- * The dt struct contains the device tree structure, full pathes and
- * property contents. The dt strings contain a separate block with just
- * the strings for the property names, and is fully page aligned and
- * self contained in a page, so that it can be kept around by the kernel,
- * each property name appears only once in this page (cheap compression)
- *
- * the mem_rsvmap contains a map of reserved ranges of physical memory,
- * passing it here instead of in the device-tree itself greatly simplifies
- * the job of everybody. It's just a list of u64 pairs (base/size) that
- * ends when size is 0
- */
-struct boot_param_header
-{
-	u32	magic;			/* magic word OF_DT_HEADER */
-	u32	totalsize;		/* total size of DT block */
-	u32	off_dt_struct;		/* offset to structure */
-	u32	off_dt_strings;		/* offset to strings */
-	u32	off_mem_rsvmap;		/* offset to memory reserve map */
-	u32	version;		/* format version */
-	u32	last_comp_version;	/* last compatible version */
-	/* version 2 fields below */
-	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
-	/* version 3 fields below */
-	u32	dt_strings_size;	/* size of the DT strings block */
-	/* version 17 fields below */
-	u32	dt_struct_size;		/* size of the DT structure block */
-};
-
-
-
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-};
-
-struct device_node {
-	const char *name;
-	const char *type;
-	phandle	node;
-	phandle linux_phandle;
-	char	*full_name;
-
-	struct	property *properties;
-	struct  property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  kref kref;
-	unsigned long _flags;
-	void	*data;
-};
-
 extern struct device_node *of_chosen;
 
-static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
-{
-	return test_bit(flag, &n->_flags);
-}
-
-static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
-{
-	set_bit(flag, &n->_flags);
-}
-
-
 #define HAVE_ARCH_DEVTREE_FIXUPS
 
-static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
-{
-	dn->pde = de;
-}
-
-
-extern struct device_node *of_find_all_nodes(struct device_node *prev);
-extern struct device_node *of_node_get(struct device_node *node);
-extern void of_node_put(struct device_node *node);
-
-/* For scanning the flat device-tree at boot time */
-extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
-					    const char *uname, int depth,
-					    void *data),
-				  void *data);
-extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
-					unsigned long *size);
-extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
-extern unsigned long __init of_get_flat_dt_root(void);
-
 /* For updating the device tree at runtime */
 extern void of_attach_node(struct device_node *);
 extern void of_detach_node(struct device_node *);
 
-/* Other Prototypes */
-extern void finish_device_tree(void);
-extern void unflatten_device_tree(void);
-extern void early_init_devtree(void *);
-extern int machine_is_compatible(const char *compat);
-extern void print_properties(struct device_node *node);
-extern int prom_n_intr_cells(struct device_node* np);
-extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
-extern int prom_add_property(struct device_node* np, struct property* prop);
-extern int prom_remove_property(struct device_node *np, struct property *prop);
-extern int prom_update_property(struct device_node *np,
-				struct property *newprop,
-				struct property *oldprop);
-
 #ifdef CONFIG_PPC32
 /*
  * PCI <-> OF matching functions
@@ -178,26 +61,6 @@
  * OF address retreival & translation
  */
 
-
-/* Helper to read a big number; size is in cells (not bytes) */
-static inline u64 of_read_number(const u32 *cell, int size)
-{
-	u64 r = 0;
-	while (size--)
-		r = (r << 32) | *(cell++);
-	return r;
-}
-
-/* Like of_read_number, but we want an unsigned long result */
-#ifdef CONFIG_PPC32
-static inline unsigned long of_read_ulong(const u32 *cell, int size)
-{
-	return cell[size-1];
-}
-#else
-#define of_read_ulong(cell, size)	of_read_number(cell, size)
-#endif
-
 /* Translate an OF address block into a CPU physical address
  */
 extern u64 of_translate_address(struct device_node *np, const u32 *addr);
@@ -349,11 +212,5 @@
  */
 extern void __iomem *of_iomap(struct device_node *device, int index);
 
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 6315edc..bc8dd53 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -489,6 +489,8 @@
 #define SPRN_MMCR1	798
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
+#define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
+#define   MMCRA_SDAR_ERAT_MISS   0x20000000UL
 #define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
 #define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
 #define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 3ab8b3e..866f760 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -67,4 +67,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h
new file mode 100644
index 0000000..cbe2297
--- /dev/null
+++ b/arch/powerpc/include/asm/trace.h
@@ -0,0 +1,133 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM powerpc
+
+#if !defined(_TRACE_POWERPC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_POWERPC_H
+
+#include <linux/tracepoint.h>
+
+struct pt_regs;
+
+TRACE_EVENT(irq_entry,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(irq_exit,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(timer_interrupt_entry,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(timer_interrupt_exit,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+#ifdef CONFIG_PPC_PSERIES
+extern void hcall_tracepoint_regfunc(void);
+extern void hcall_tracepoint_unregfunc(void);
+
+TRACE_EVENT_FN(hcall_entry,
+
+	TP_PROTO(unsigned long opcode, unsigned long *args),
+
+	TP_ARGS(opcode, args),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, opcode)
+	),
+
+	TP_fast_assign(
+		__entry->opcode = opcode;
+	),
+
+	TP_printk("opcode=%lu", __entry->opcode),
+
+	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+
+TRACE_EVENT_FN(hcall_exit,
+
+	TP_PROTO(unsigned long opcode, unsigned long retval,
+		unsigned long *retbuf),
+
+	TP_ARGS(opcode, retval, retbuf),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, opcode)
+		__field(unsigned long, retval)
+	),
+
+	TP_fast_assign(
+		__entry->opcode = opcode;
+		__entry->retval = retval;
+	),
+
+	TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval),
+
+	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+#endif
+
+#endif /* _TRACE_POWERPC_H */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH asm
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index a5b632e5..3839839 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -732,7 +732,7 @@
 
 #ifdef CONFIG_SPE
 	if ((instr >> 26) == 0x4) {
-		PPC_WARN_EMULATED(spe);
+		PPC_WARN_ALIGNMENT(spe, regs);
 		return emulate_spe(regs, reg, instr);
 	}
 #endif
@@ -786,7 +786,7 @@
 			flags |= SPLT;
 			nb = 8;
 		}
-		PPC_WARN_EMULATED(vsx);
+		PPC_WARN_ALIGNMENT(vsx, regs);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb);
 	}
 #endif
@@ -794,7 +794,7 @@
 	 * the exception of DCBZ which is handled as a special case here
 	 */
 	if (instr == DCBZ) {
-		PPC_WARN_EMULATED(dcbz);
+		PPC_WARN_ALIGNMENT(dcbz, regs);
 		return emulate_dcbz(regs, addr);
 	}
 	if (unlikely(nb == 0))
@@ -804,7 +804,7 @@
 	 * function
 	 */
 	if (flags & M) {
-		PPC_WARN_EMULATED(multiple);
+		PPC_WARN_ALIGNMENT(multiple, regs);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
 	}
@@ -825,11 +825,11 @@
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16) {
-		PPC_WARN_EMULATED(fp_pair);
+		PPC_WARN_ALIGNMENT(fp_pair, regs);
 		return emulate_fp_pair(addr, reg, flags);
 	}
 
-	PPC_WARN_EMULATED(unaligned);
+	PPC_WARN_ALIGNMENT(unaligned, regs);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 9763267..bdcb557 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -551,7 +551,7 @@
 BEGIN_FW_FTR_SECTION
 	ld	r5,SOFTE(r1)
 FW_FTR_SECTION_ELSE
-	b	iseries_check_pending_irqs
+	b	.Liseries_check_pending_irqs
 ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
@@ -623,7 +623,7 @@
 
 #endif /* CONFIG_PPC_BOOK3E */
 
-iseries_check_pending_irqs:
+.Liseries_check_pending_irqs:
 #ifdef CONFIG_PPC_ISERIES
 	ld	r5,SOFTE(r1)
 	cmpdi	0,r5,0
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index fc3ead0..e3be98f 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -190,14 +190,17 @@
 	 * prolog code of the PerformanceMonitor one. A little
 	 * trickery is thus necessary
 	 */
+performance_monitor_pSeries_1:
 	. = 0xf00
 	DO_KVM	0xf00
 	b	performance_monitor_pSeries
 
+altivec_unavailable_pSeries_1:
 	. = 0xf20
 	DO_KVM	0xf20
 	b	altivec_unavailable_pSeries
 
+vsx_unavailable_pSeries_1:
 	. = 0xf40
 	DO_KVM	0xf40
 	b	vsx_unavailable_pSeries
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 88d9c1d..049dda6 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -110,18 +110,16 @@
  */
 static ctl_table powersave_nap_ctl_table[]={
 	{
-		.ctl_name	= KERN_PPC_POWERSAVE_NAP,
 		.procname	= "powersave-nap",
 		.data		= &powersave_nap,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{}
 };
 static ctl_table powersave_nap_sysctl_root[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= powersave_nap_ctl_table,
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index 042a530..f6dca4f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -70,6 +70,8 @@
 #include <asm/firmware.h>
 #include <asm/lv1call.h>
 #endif
+#define CREATE_TRACE_POINTS
+#include <asm/trace.h>
 
 int __irq_offset_value;
 static int ppc_spurious_interrupts;
@@ -340,6 +342,8 @@
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	unsigned int irq;
 
+	trace_irq_entry(regs);
+
 	irq_enter();
 
 	check_stack_overflow();
@@ -363,6 +367,8 @@
 		timer_interrupt(regs);
 	}
 #endif
+
+	trace_irq_exit(regs);
 }
 
 void __init init_IRQ(void)
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 87f1663..1eb85fb 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -1165,7 +1165,7 @@
 	 */
 	if (record) {
 		struct perf_sample_data data = {
-			.addr	= 0,
+			.addr	= ~0ULL,
 			.period	= event->hw.last_period,
 		};
 
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 0f4c1c7..199de52 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -73,10 +73,6 @@
 #define MMCR1_PMCSEL_MSK	0x7f
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index c351b3a..98b6a72 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -73,10 +73,6 @@
 #define MMCR1_PMCSEL_MSK	0x7f
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
@@ -390,7 +386,7 @@
 			       unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	unsigned int pmc, unit, byte, psel;
 	unsigned int ttm, grp;
 	int i, isbus, bit, grsel;
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index ca399ba..84a607b 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -178,7 +178,7 @@
 			   unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	int i;
 	unsigned int pmc, ev, b, u, s, psel;
 	unsigned int ttmset = 0;
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 28a4daa..852f7b7 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -51,10 +51,6 @@
 #define MMCR1_PMCSEL_MSK	0xff
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
@@ -230,7 +226,7 @@
 			       unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	unsigned int pmc, unit, combine, l2sel, psel;
 	unsigned int pmc_inuse = 0;
 	int i;
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 4795744..8eff48e 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -84,10 +84,6 @@
 };
 
 /*
- * Bits in MMCRA
- */
-
-/*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
  * 3210987654321098765432109876543210987654321098765432109876543210
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index d4405b9..4ec3008 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1317,29 +1317,6 @@
 }
 
 /**
- *	of_find_all_nodes - Get next node in global list
- *	@prev:	Previous node or NULL to start iteration
- *		of_node_put() will be called on it
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
-	struct device_node *np;
-
-	read_lock(&devtree_lock);
-	np = prev ? prev->allnext : allnodes;
-	for (; np != 0; np = np->allnext)
-		if (of_node_get(np))
-			break;
-	of_node_put(prev);
-	read_unlock(&devtree_lock);
-	return np;
-}
-EXPORT_SYMBOL(of_find_all_nodes);
-
-/**
  *	of_node_get - Increment refcount of a node
  *	@node:	Node to inc refcount, NULL is supported to
  *		simplify writing of callers
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 4271f7a..845c72a 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -660,6 +660,7 @@
 
 #ifdef CONFIG_DEBUG_FS
 struct dentry *powerpc_debugfs_root;
+EXPORT_SYMBOL(powerpc_debugfs_root);
 
 static int powerpc_debugfs_init(void)
 {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 53bcf3d..b152de3 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -345,7 +345,7 @@
 
 #ifdef CONFIG_SWIOTLB
 	if (ppc_swiotlb_enable)
-		swiotlb_init();
+		swiotlb_init(1);
 #endif
 
 	paging_init();
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index fd785f7..6568406 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -545,7 +545,7 @@
 
 #ifdef CONFIG_SWIOTLB
 	if (ppc_swiotlb_enable)
-		swiotlb_init();
+		swiotlb_init(1);
 #endif
 
 	paging_init();
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index b97c2d6..c5a4732 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -520,58 +520,6 @@
 	return sys_umask((int)mask);
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long compat_sys_sysctl(struct __sysctl_args32 __user *args)
-{
-	struct __sysctl_args32 tmp;
-	int error;
-	size_t oldlen;
-	size_t __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		oldlenp = (size_t __user *)addr;
-		if (get_user(oldlen, (compat_size_t __user *)compat_ptr(tmp.oldlenp)) ||
-		    put_user(oldlen, oldlenp))
-			return -EFAULT;
-	}
-
-	lock_kernel();
-	error = do_sysctl(compat_ptr(tmp.name), tmp.nlen,
-			  compat_ptr(tmp.oldval), oldlenp,
-			  compat_ptr(tmp.newval), tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, oldlenp) ||
-			    put_user(oldlen, (compat_size_t __user *)compat_ptr(tmp.oldlenp)))
-				error = -EFAULT;
-		}
-		copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused));
-	}
-	return error;
-}
-#endif
-
 unsigned long compat_sys_mmap2(unsigned long addr, size_t len,
 			  unsigned long prot, unsigned long flags,
 			  unsigned long fd, unsigned long pgoff)
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 6c9e208..e9af16c 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -54,6 +54,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/perf_event.h>
+#include <asm/trace.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -572,6 +573,8 @@
 	struct clock_event_device *evt = &decrementer->event;
 	u64 now;
 
+	trace_timer_interrupt_entry(regs);
+
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continuue to take decrementer exceptions */
 	set_dec(DECREMENTER_MAX);
@@ -591,6 +594,7 @@
 		now = decrementer->next_tb - now;
 		if (now <= DECREMENTER_MAX)
 			set_dec((int)now);
+		trace_timer_interrupt_exit(regs);
 		return;
 	}
 	old_regs = set_irq_regs(regs);
@@ -621,6 +625,8 @@
 
 	irq_exit();
 	set_irq_regs(old_regs);
+
+	trace_timer_interrupt_exit(regs);
 }
 
 void wakeup_decrementer(void)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index a81c743..804f0f3 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -737,7 +737,7 @@
 
 	/* Emulate the mfspr rD, PVR. */
 	if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
-		PPC_WARN_EMULATED(mfpvr);
+		PPC_WARN_EMULATED(mfpvr, regs);
 		rd = (instword >> 21) & 0x1f;
 		regs->gpr[rd] = mfspr(SPRN_PVR);
 		return 0;
@@ -745,7 +745,7 @@
 
 	/* Emulating the dcba insn is just a no-op.  */
 	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) {
-		PPC_WARN_EMULATED(dcba);
+		PPC_WARN_EMULATED(dcba, regs);
 		return 0;
 	}
 
@@ -754,7 +754,7 @@
 		int shift = (instword >> 21) & 0x1c;
 		unsigned long msk = 0xf0000000UL >> shift;
 
-		PPC_WARN_EMULATED(mcrxr);
+		PPC_WARN_EMULATED(mcrxr, regs);
 		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
 		regs->xer &= ~0xf0000000UL;
 		return 0;
@@ -762,19 +762,19 @@
 
 	/* Emulate load/store string insn. */
 	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
-		PPC_WARN_EMULATED(string);
+		PPC_WARN_EMULATED(string, regs);
 		return emulate_string_inst(regs, instword);
 	}
 
 	/* Emulate the popcntb (Population Count Bytes) instruction. */
 	if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
-		PPC_WARN_EMULATED(popcntb);
+		PPC_WARN_EMULATED(popcntb, regs);
 		return emulate_popcntb_inst(regs, instword);
 	}
 
 	/* Emulate isel (Integer Select) instruction */
 	if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
-		PPC_WARN_EMULATED(isel);
+		PPC_WARN_EMULATED(isel, regs);
 		return emulate_isel(regs, instword);
 	}
 
@@ -973,7 +973,7 @@
 #ifdef CONFIG_MATH_EMULATION
 	errcode = do_mathemu(regs);
 	if (errcode >= 0)
-		PPC_WARN_EMULATED(math);
+		PPC_WARN_EMULATED(math, regs);
 
 	switch (errcode) {
 	case 0:
@@ -996,7 +996,7 @@
 #elif defined(CONFIG_8XX_MINIMAL_FPEMU)
 	errcode = Soft_emulate_8xx(regs);
 	if (errcode >= 0)
-		PPC_WARN_EMULATED(8xx);
+		PPC_WARN_EMULATED(8xx, regs);
 
 	switch (errcode) {
 	case 0:
@@ -1107,7 +1107,7 @@
 
 	flush_altivec_to_thread(current);
 
-	PPC_WARN_EMULATED(altivec);
+	PPC_WARN_EMULATED(altivec, regs);
 	err = emulate_altivec(regs);
 	if (err == 0) {
 		regs->nip += 4;		/* skip emulated instruction */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index d82551e..f06cf93 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -79,8 +79,9 @@
 	return r;
 }
 
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
+	return 0;
 }
 
 void kvm_arch_hardware_disable(void *garbage)
@@ -435,7 +436,7 @@
 
 	switch (ioctl) {
 	default:
-		r = -EINVAL;
+		r = -ENOTTY;
 	}
 
 	return r;
diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h
index 806ef67..8167d42 100644
--- a/arch/powerpc/kvm/timing.h
+++ b/arch/powerpc/kvm/timing.h
@@ -51,7 +51,7 @@
 
 	/* The BUILD_BUG_ON below breaks in funny ways, commented out
 	 * for now ... -BenH
-	BUILD_BUG_ON(__builtin_constant_p(type));
+	BUILD_BUG_ON(!__builtin_constant_p(type));
 	*/
 	switch (type) {
 	case EXT_INTR_EXITS:
diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S
index 75f3267..e68beac 100644
--- a/arch/powerpc/lib/copypage_64.S
+++ b/arch/powerpc/lib/copypage_64.S
@@ -26,11 +26,11 @@
 	srd	r8,r5,r11
 
 	mtctr	r8
-setup:
+.Lsetup:
 	dcbt	r9,r4
 	dcbz	r9,r3
 	add	r9,r9,r12
-	bdnz	setup
+	bdnz	.Lsetup
 END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
 	addi	r3,r3,-8
 	srdi    r8,r5,7		/* page is copied in 128 byte strides */
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 414ca98..345e2da 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -42,6 +42,7 @@
 #include <linux/interrupt.h>
 #include <linux/timer.h>
 #include <linux/mutex.h>
+#include <linux/i2c.h>
 #include <asm/keylargo.h>
 #include <asm/uninorth.h>
 #include <asm/io.h>
@@ -80,7 +81,7 @@
 	struct device_node	*busnode;
 	int			type;
 	int			flags;
-	struct i2c_adapter	*adapter;
+	struct i2c_adapter	adapter;
 	void			*hostdata;
 	int			channel;	/* some hosts have multiple */
 	int			mode;		/* current mode */
@@ -1014,25 +1015,9 @@
 EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
 
 
-void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
-			     struct i2c_adapter *adapter)
-{
-	WARN_ON(bus->adapter != NULL);
-	bus->adapter = adapter;
-}
-EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter);
-
-void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
-			     struct i2c_adapter *adapter)
-{
-	WARN_ON(bus->adapter != adapter);
-	bus->adapter = NULL;
-}
-EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter);
-
 struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
 {
-	return bus->adapter;
+	return &bus->adapter;
 }
 EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
 
@@ -1041,7 +1026,7 @@
 	struct pmac_i2c_bus *bus;
 
 	list_for_each_entry(bus, &pmac_i2c_busses, link)
-		if (bus->adapter == adapter)
+		if (&bus->adapter == adapter)
 			return bus;
 	return NULL;
 }
@@ -1053,7 +1038,7 @@
 
 	if (bus == NULL)
 		return 0;
-	return (bus->adapter == adapter);
+	return (&bus->adapter == adapter);
 }
 EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
 
diff --git a/arch/powerpc/platforms/pseries/hvCall.S b/arch/powerpc/platforms/pseries/hvCall.S
index c1427b3..383a5d0 100644
--- a/arch/powerpc/platforms/pseries/hvCall.S
+++ b/arch/powerpc/platforms/pseries/hvCall.S
@@ -14,68 +14,94 @@
 	
 #define STK_PARM(i)     (48 + ((i)-3)*8)
 
-#ifdef CONFIG_HCALL_STATS
+#ifdef CONFIG_TRACEPOINTS
+
+	.section	".toc","aw"
+
+	.globl hcall_tracepoint_refcount
+hcall_tracepoint_refcount:
+	.llong	0
+
+	.section	".text"
+
 /*
  * precall must preserve all registers.  use unused STK_PARM()
- * areas to save snapshots and opcode.
+ * areas to save snapshots and opcode. We branch around this
+ * in early init (eg when populating the MMU hashtable) by using an
+ * unconditional cpu feature.
  */
-#define HCALL_INST_PRECALL					\
-	std	r3,STK_PARM(r3)(r1);	/* save opcode */	\
-	mftb	r0;			/* get timebase and */	\
-	std     r0,STK_PARM(r5)(r1);	/* save for later */	\
+#define HCALL_INST_PRECALL(FIRST_REG)				\
 BEGIN_FTR_SECTION;						\
-	mfspr	r0,SPRN_PURR;		/* get PURR and */	\
-	std	r0,STK_PARM(r6)(r1);	/* save for later */	\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);
-	
+	b	1f;						\
+END_FTR_SECTION(0, 1);						\
+	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
+	cmpdi	r12,0;						\
+	beq+	1f;						\
+	mflr	r0;						\
+	std	r3,STK_PARM(r3)(r1);				\
+	std	r4,STK_PARM(r4)(r1);				\
+	std	r5,STK_PARM(r5)(r1);				\
+	std	r6,STK_PARM(r6)(r1);				\
+	std	r7,STK_PARM(r7)(r1);				\
+	std	r8,STK_PARM(r8)(r1);				\
+	std	r9,STK_PARM(r9)(r1);				\
+	std	r10,STK_PARM(r10)(r1);				\
+	std	r0,16(r1);					\
+	addi	r4,r1,STK_PARM(FIRST_REG);			\
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
+	bl	.__trace_hcall_entry;				\
+	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
+	ld	r0,16(r1);					\
+	ld	r3,STK_PARM(r3)(r1);				\
+	ld	r4,STK_PARM(r4)(r1);				\
+	ld	r5,STK_PARM(r5)(r1);				\
+	ld	r6,STK_PARM(r6)(r1);				\
+	ld	r7,STK_PARM(r7)(r1);				\
+	ld	r8,STK_PARM(r8)(r1);				\
+	ld	r9,STK_PARM(r9)(r1);				\
+	ld	r10,STK_PARM(r10)(r1);				\
+	mtlr	r0;						\
+1:
+
 /*
  * postcall is performed immediately before function return which
  * allows liberal use of volatile registers.  We branch around this
  * in early init (eg when populating the MMU hashtable) by using an
  * unconditional cpu feature.
  */
-#define HCALL_INST_POSTCALL					\
+#define __HCALL_INST_POSTCALL					\
 BEGIN_FTR_SECTION;						\
 	b	1f;						\
 END_FTR_SECTION(0, 1);						\
-	ld	r4,STK_PARM(r3)(r1);	/* validate opcode */	\
-	cmpldi	cr7,r4,MAX_HCALL_OPCODE;			\
-	bgt-	cr7,1f;						\
-								\
-	/* get time and PURR snapshots after hcall */		\
-	mftb	r7;			/* timebase after */	\
-BEGIN_FTR_SECTION;						\
-	mfspr	r8,SPRN_PURR;		/* PURR after */	\
-	ld	r6,STK_PARM(r6)(r1);	/* PURR before */	\
-	subf	r6,r6,r8;		/* delta */		\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);				\
-	ld	r5,STK_PARM(r5)(r1);	/* timebase before */	\
-	subf	r5,r5,r7;		/* time delta */	\
-								\
-	/* calculate address of stat structure r4 = opcode */	\
-	srdi	r4,r4,2;		/* index into array */	\
-	mulli	r4,r4,HCALL_STAT_SIZE;				\
-	LOAD_REG_ADDR(r7, per_cpu__hcall_stats);		\
-	add	r4,r4,r7;					\
-	ld	r7,PACA_DATA_OFFSET(r13); /* per cpu offset */	\
-	add	r4,r4,r7;					\
-								\
-	/* update stats	*/					\
-	ld	r7,HCALL_STAT_CALLS(r4); /* count */		\
-	addi	r7,r7,1;					\
-	std	r7,HCALL_STAT_CALLS(r4);			\
-	ld      r7,HCALL_STAT_TB(r4);	/* timebase */		\
-	add	r7,r7,r5;					\
-	std	r7,HCALL_STAT_TB(r4);				\
-BEGIN_FTR_SECTION;						\
-	ld	r7,HCALL_STAT_PURR(r4);	/* PURR */		\
-	add	r7,r7,r6;					\
-	std	r7,HCALL_STAT_PURR(r4);				\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);				\
+	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
+	cmpdi	r12,0;						\
+	beq+	1f;						\
+	mflr	r0;						\
+	ld	r6,STK_PARM(r3)(r1);				\
+	std	r3,STK_PARM(r3)(r1);				\
+	mr	r4,r3;						\
+	mr	r3,r6;						\
+	std	r0,16(r1);					\
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
+	bl	.__trace_hcall_exit;				\
+	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
+	ld	r0,16(r1);					\
+	ld	r3,STK_PARM(r3)(r1);				\
+	mtlr	r0;						\
 1:
+
+#define HCALL_INST_POSTCALL_NORETS				\
+	li	r5,0;						\
+	__HCALL_INST_POSTCALL
+
+#define HCALL_INST_POSTCALL(BUFREG)				\
+	mr	r5,BUFREG;					\
+	__HCALL_INST_POSTCALL
+
 #else
-#define HCALL_INST_PRECALL
-#define HCALL_INST_POSTCALL
+#define HCALL_INST_PRECALL(FIRST_ARG)
+#define HCALL_INST_POSTCALL_NORETS
+#define HCALL_INST_POSTCALL(BUFREG)
 #endif
 
 	.text
@@ -86,11 +112,11 @@
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r4)
 
 	HVSC				/* invoke the hypervisor */
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL_NORETS
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
@@ -102,7 +128,7 @@
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r5)
 
 	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
 
@@ -121,7 +147,7 @@
 	std	r6, 16(r12)
 	std	r7, 24(r12)
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
@@ -168,7 +194,7 @@
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r5)
 
 	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
 
@@ -196,7 +222,7 @@
 	std	r11,56(r12)
 	std	r0, 64(r12)
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c
index 3631a4f..2f58c71 100644
--- a/arch/powerpc/platforms/pseries/hvCall_inst.c
+++ b/arch/powerpc/platforms/pseries/hvCall_inst.c
@@ -26,6 +26,7 @@
 #include <asm/hvcall.h>
 #include <asm/firmware.h>
 #include <asm/cputable.h>
+#include <asm/trace.h>
 
 DEFINE_PER_CPU(struct hcall_stats[HCALL_STAT_ARRAY_SIZE], hcall_stats);
 
@@ -100,6 +101,35 @@
 #define	HCALL_ROOT_DIR		"hcall_inst"
 #define CPU_NAME_BUF_SIZE	32
 
+
+static void probe_hcall_entry(unsigned long opcode, unsigned long *args)
+{
+	struct hcall_stats *h;
+
+	if (opcode > MAX_HCALL_OPCODE)
+		return;
+
+	h = &get_cpu_var(hcall_stats)[opcode / 4];
+	h->tb_start = mftb();
+	h->purr_start = mfspr(SPRN_PURR);
+}
+
+static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
+			     unsigned long *retbuf)
+{
+	struct hcall_stats *h;
+
+	if (opcode > MAX_HCALL_OPCODE)
+		return;
+
+	h = &__get_cpu_var(hcall_stats)[opcode / 4];
+	h->num_calls++;
+	h->tb_total = mftb() - h->tb_start;
+	h->purr_total = mfspr(SPRN_PURR) - h->purr_start;
+
+	put_cpu_var(hcall_stats);
+}
+
 static int __init hcall_inst_init(void)
 {
 	struct dentry *hcall_root;
@@ -110,6 +140,14 @@
 	if (!firmware_has_feature(FW_FEATURE_LPAR))
 		return 0;
 
+	if (register_trace_hcall_entry(probe_hcall_entry))
+		return -EINVAL;
+
+	if (register_trace_hcall_exit(probe_hcall_exit)) {
+		unregister_trace_hcall_entry(probe_hcall_entry);
+		return -EINVAL;
+	}
+
 	hcall_root = debugfs_create_dir(HCALL_ROOT_DIR, NULL);
 	if (!hcall_root)
 		return -ENOMEM;
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 903eb9e..0707653 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -39,6 +39,7 @@
 #include <asm/cputable.h>
 #include <asm/udbg.h>
 #include <asm/smp.h>
+#include <asm/trace.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -661,3 +662,35 @@
 EXPORT_SYMBOL(arch_free_page);
 
 #endif
+
+#ifdef CONFIG_TRACEPOINTS
+/*
+ * We optimise our hcall path by placing hcall_tracepoint_refcount
+ * directly in the TOC so we can check if the hcall tracepoints are
+ * enabled via a single load.
+ */
+
+/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
+extern long hcall_tracepoint_refcount;
+
+void hcall_tracepoint_regfunc(void)
+{
+	hcall_tracepoint_refcount++;
+}
+
+void hcall_tracepoint_unregfunc(void)
+{
+	hcall_tracepoint_refcount--;
+}
+
+void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
+{
+	trace_hcall_entry(opcode, args);
+}
+
+void __trace_hcall_exit(long opcode, unsigned long retval,
+			unsigned long *retbuf)
+{
+	trace_hcall_exit(opcode, retval, retbuf);
+}
+#endif
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 43c0aca..16c6730 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,6 +95,34 @@
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_EVENTS
+	select ARCH_INLINE_SPIN_TRYLOCK
+	select ARCH_INLINE_SPIN_TRYLOCK_BH
+	select ARCH_INLINE_SPIN_LOCK
+	select ARCH_INLINE_SPIN_LOCK_BH
+	select ARCH_INLINE_SPIN_LOCK_IRQ
+	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
+	select ARCH_INLINE_SPIN_UNLOCK
+	select ARCH_INLINE_SPIN_UNLOCK_BH
+	select ARCH_INLINE_SPIN_UNLOCK_IRQ
+	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
+	select ARCH_INLINE_READ_TRYLOCK
+	select ARCH_INLINE_READ_LOCK
+	select ARCH_INLINE_READ_LOCK_BH
+	select ARCH_INLINE_READ_LOCK_IRQ
+	select ARCH_INLINE_READ_LOCK_IRQSAVE
+	select ARCH_INLINE_READ_UNLOCK
+	select ARCH_INLINE_READ_UNLOCK_BH
+	select ARCH_INLINE_READ_UNLOCK_IRQ
+	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
+	select ARCH_INLINE_WRITE_TRYLOCK
+	select ARCH_INLINE_WRITE_LOCK
+	select ARCH_INLINE_WRITE_LOCK_BH
+	select ARCH_INLINE_WRITE_LOCK_IRQ
+	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
+	select ARCH_INLINE_WRITE_UNLOCK
+	select ARCH_INLINE_WRITE_UNLOCK_BH
+	select ARCH_INLINE_WRITE_UNLOCK_IRQ
+	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
 
 config SCHED_OMIT_FRAME_POINTER
 	bool
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index b55fd7e..4955899 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -61,12 +61,12 @@
 	{
 		.procname	= "timer",
 		.mode		= S_IRUGO | S_IWUSR,
-		.proc_handler	= &appldata_timer_handler,
+		.proc_handler	= appldata_timer_handler,
 	},
 	{
 		.procname	= "interval",
 		.mode		= S_IRUGO | S_IWUSR,
-		.proc_handler	= &appldata_interval_handler,
+		.proc_handler	= appldata_interval_handler,
 	},
 	{ },
 };
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index fa741f8..4ce7fa9 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -83,8 +83,9 @@
 	rx_dropped = 0;
 	tx_dropped = 0;
 	collisions = 0;
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		const struct net_device_stats *stats = dev_get_stats(dev);
 
 		rx_packets += stats->rx_packets;
@@ -98,7 +99,8 @@
 		collisions += stats->collisions;
 		i++;
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
+
 	net_data->nr_interfaces = i;
 	net_data->rx_packets = rx_packets;
 	net_data->tx_packets = tx_packets;
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index 7efd0ab..efb74fd 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -49,7 +49,7 @@
 
 #define BUG() do {					\
 	__EMIT_BUG(0);					\
-	for (;;);					\
+	unreachable();					\
 } while (0)
 
 #define WARN_ON(x) ({					\
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
index 49d5af9..405cc97 100644
--- a/arch/s390/include/asm/cacheflush.h
+++ b/arch/s390/include/asm/cacheflush.h
@@ -10,6 +10,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
index 3dfcaeb..82b32a1 100644
--- a/arch/s390/include/asm/kvm.h
+++ b/arch/s390/include/asm/kvm.h
@@ -1,6 +1,5 @@
 #ifndef __LINUX_KVM_S390_H
 #define __LINUX_KVM_S390_H
-
 /*
  * asm-s390/kvm.h - KVM s390 specific structures and definitions
  *
@@ -15,6 +14,8 @@
  */
 #include <linux/types.h>
 
+#define __KVM_S390
+
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
 	/* general purpose regs for s390 */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index e42df89..fdff1e9 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -68,4 +68,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index 41ce686..c9af0d19 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -191,33 +191,4 @@
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
-#define __always_inline__spin_lock
-#define __always_inline__read_lock
-#define __always_inline__write_lock
-#define __always_inline__spin_lock_bh
-#define __always_inline__read_lock_bh
-#define __always_inline__write_lock_bh
-#define __always_inline__spin_lock_irq
-#define __always_inline__read_lock_irq
-#define __always_inline__write_lock_irq
-#define __always_inline__spin_lock_irqsave
-#define __always_inline__read_lock_irqsave
-#define __always_inline__write_lock_irqsave
-#define __always_inline__spin_trylock
-#define __always_inline__read_trylock
-#define __always_inline__write_trylock
-#define __always_inline__spin_trylock_bh
-#define __always_inline__spin_unlock
-#define __always_inline__read_unlock
-#define __always_inline__write_unlock
-#define __always_inline__spin_unlock_bh
-#define __always_inline__read_unlock_bh
-#define __always_inline__write_unlock_bh
-#define __always_inline__spin_unlock_irq
-#define __always_inline__read_unlock_irq
-#define __always_inline__write_unlock_irq
-#define __always_inline__spin_unlock_irqrestore
-#define __always_inline__read_unlock_irqrestore
-#define __always_inline__write_unlock_irqrestore
-
 #endif /* __ASM_SPINLOCK_H */
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 0debcec..fda1a81 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -527,59 +527,6 @@
 	return ret;
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
-{
-	struct __sysctl_args32 tmp;
-	int error;
-	size_t oldlen;
-	size_t __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7) & ~7;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		if (get_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)) ||
-		    put_user(oldlen, (size_t __user *)addr))
-			return -EFAULT;
-		oldlenp = (size_t __user *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl(compat_ptr(tmp.name), tmp.nlen, compat_ptr(tmp.oldval),
-			  oldlenp, compat_ptr(tmp.newval), tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t __user *)addr) ||
-			    put_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp)))
-				error = -EFAULT;
-		}
-		if (copy_to_user(args->__unused, tmp.__unused,
-				 sizeof(tmp.__unused)))
-			error = -EFAULT;
-	}
-	return error;
-}
-#endif
-
 struct stat64_emu31 {
 	unsigned long long  st_dev;
 	unsigned int    __pad1;
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index c07f9ca..45e9092 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -162,7 +162,6 @@
 	compat_sigset_t		uc_sigmask;	/* mask last for extensibility */
 };
 
-struct __sysctl_args32;
 struct stat64_emu31;
 struct mmap_arg_struct_emu31;
 struct fadvise64_64_args;
@@ -212,7 +211,6 @@
 		    size_t count);
 long sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset,
 		      s32 count);
-long sys32_sysctl(struct __sysctl_args32 __user *args);
 long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf);
 long sys32_lstat64(char __user * filename,
 		   struct stat64_emu31 __user * statbuf);
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index cbd9901..30de2d0 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -689,8 +689,6 @@
 	llgfr	%r2,%r2			# unsigned int
 	jg	sys_fdatasync		# branch to system call
 
-#sys32_sysctl_wrapper			# tbd
-
 	.globl	sys32_mlock_wrapper
 sys32_mlock_wrapper:
 	llgfr	%r2,%r2			# unsigned long
@@ -1087,8 +1085,8 @@
 
 	.globl	sys32_sysctl_wrapper
 sys32_sysctl_wrapper:
-	llgtr	%r2,%r2 		# struct __sysctl_args32 *
-	jg	sys32_sysctl
+	llgtr	%r2,%r2 		# struct compat_sysctl_args *
+	jg	compat_sys_sysctl
 
 	.globl	sys32_fstat64_wrapper
 sys32_fstat64_wrapper:
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 20f282c..071c81f 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -893,35 +893,30 @@
 
 static struct ctl_table s390dbf_table[] = {
 	{
-		.ctl_name       = CTL_S390DBF_STOPPABLE,
 		.procname       = "debug_stoppable",
 		.data		= &debug_stoppable,
 		.maxlen		= sizeof(int),
 		.mode           = S_IRUGO | S_IWUSR,
-		.proc_handler   = &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler   = proc_dointvec,
 	},
 	 {
-		.ctl_name       = CTL_S390DBF_ACTIVE,
 		.procname       = "debug_active",
 		.data		= &debug_active,
 		.maxlen		= sizeof(int),
 		.mode           = S_IRUGO | S_IWUSR,
-		.proc_handler   = &s390dbf_procactive,
-		.strategy	= &sysctl_intvec,
+		.proc_handler   = s390dbf_procactive,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table s390dbf_dir_table[] = {
 	{
-		.ctl_name       = CTL_S390DBF,
 		.procname       = "s390dbf",
 		.maxlen         = 0,
 		.mode           = S_IRUGO | S_IXUGO,
 		.child          = s390dbf_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header *s390dbf_sysctl_header;
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index f5fe34d..5a82bc6 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -203,73 +203,10 @@
 
 #ifdef CONFIG_FTRACE_SYSCALLS
 
-extern unsigned long __start_syscalls_metadata[];
-extern unsigned long __stop_syscalls_metadata[];
 extern unsigned int sys_call_table[];
 
-static struct syscall_metadata **syscalls_metadata;
-
-struct syscall_metadata *syscall_nr_to_meta(int nr)
+unsigned long __init arch_syscall_addr(int nr)
 {
-	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
-		return NULL;
-
-	return syscalls_metadata[nr];
+	return (unsigned long)sys_call_table[nr];
 }
-
-int syscall_name_to_nr(char *name)
-{
-	int i;
-
-	if (!syscalls_metadata)
-		return -1;
-	for (i = 0; i < NR_syscalls; i++)
-		if (syscalls_metadata[i])
-			if (!strcmp(syscalls_metadata[i]->name, name))
-				return i;
-	return -1;
-}
-
-void set_syscall_enter_id(int num, int id)
-{
-	syscalls_metadata[num]->enter_id = id;
-}
-
-void set_syscall_exit_id(int num, int id)
-{
-	syscalls_metadata[num]->exit_id = id;
-}
-
-static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
-{
-	struct syscall_metadata *start;
-	struct syscall_metadata *stop;
-	char str[KSYM_SYMBOL_LEN];
-
-	start = (struct syscall_metadata *)__start_syscalls_metadata;
-	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
-	kallsyms_lookup(syscall, NULL, NULL, NULL, str);
-
-	for ( ; start < stop; start++) {
-		if (start->name && !strcmp(start->name + 3, str + 3))
-			return start;
-	}
-	return NULL;
-}
-
-static int __init arch_init_ftrace_syscalls(void)
-{
-	struct syscall_metadata *meta;
-	int i;
-	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
-				    GFP_KERNEL);
-	if (!syscalls_metadata)
-		return -ENOMEM;
-	for (i = 0; i < NR_syscalls; i++) {
-		meta = find_syscall_meta((unsigned long)sys_call_table[i]);
-		syscalls_metadata[i] = meta;
-	}
-	return 0;
-}
-arch_initcall(arch_init_ftrace_syscalls);
 #endif
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 07ced89..f8bcaef 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -74,9 +74,10 @@
 static unsigned long long *facilities;
 
 /* Section: not file related */
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
 	/* every s390 is virtualization enabled ;-) */
+	return 0;
 }
 
 void kvm_arch_hardware_disable(void *garbage)
@@ -116,10 +117,16 @@
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
+	int r;
+
 	switch (ext) {
+	case KVM_CAP_S390_PSW:
+		r = 1;
+		break;
 	default:
-		return 0;
+		r = 0;
 	}
+	return r;
 }
 
 /* Section: vm related */
@@ -150,7 +157,7 @@
 		break;
 	}
 	default:
-		r = -EINVAL;
+		r = -ENOTTY;
 	}
 
 	return r;
@@ -419,8 +426,10 @@
 	vcpu_load(vcpu);
 	if (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_RUNNING)
 		rc = -EBUSY;
-	else
-		vcpu->arch.sie_block->gpsw = psw;
+	else {
+		vcpu->run->psw_mask = psw.mask;
+		vcpu->run->psw_addr = psw.addr;
+	}
 	vcpu_put(vcpu);
 	return rc;
 }
@@ -508,9 +517,6 @@
 
 	switch (kvm_run->exit_reason) {
 	case KVM_EXIT_S390_SIEIC:
-		vcpu->arch.sie_block->gpsw.mask = kvm_run->s390_sieic.mask;
-		vcpu->arch.sie_block->gpsw.addr = kvm_run->s390_sieic.addr;
-		break;
 	case KVM_EXIT_UNKNOWN:
 	case KVM_EXIT_INTR:
 	case KVM_EXIT_S390_RESET:
@@ -519,6 +525,9 @@
 		BUG();
 	}
 
+	vcpu->arch.sie_block->gpsw.mask = kvm_run->psw_mask;
+	vcpu->arch.sie_block->gpsw.addr = kvm_run->psw_addr;
+
 	might_fault();
 
 	do {
@@ -538,8 +547,6 @@
 		/* intercept cannot be handled in-kernel, prepare kvm-run */
 		kvm_run->exit_reason         = KVM_EXIT_S390_SIEIC;
 		kvm_run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode;
-		kvm_run->s390_sieic.mask     = vcpu->arch.sie_block->gpsw.mask;
-		kvm_run->s390_sieic.addr     = vcpu->arch.sie_block->gpsw.addr;
 		kvm_run->s390_sieic.ipa      = vcpu->arch.sie_block->ipa;
 		kvm_run->s390_sieic.ipb      = vcpu->arch.sie_block->ipb;
 		rc = 0;
@@ -551,6 +558,9 @@
 		rc = 0;
 	}
 
+	kvm_run->psw_mask     = vcpu->arch.sie_block->gpsw.mask;
+	kvm_run->psw_addr     = vcpu->arch.sie_block->gpsw.addr;
+
 	if (vcpu->sigset_active)
 		sigprocmask(SIG_SETMASK, &sigsaved, NULL);
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 40c8c67..15ee111 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -188,9 +188,9 @@
 
 	/* make sure that the new value is valid memory */
 	address = address & 0x7fffe000u;
-	if ((copy_from_guest(vcpu, &tmp,
-		(u64) (address + vcpu->arch.sie_block->gmsor) , 1)) ||
-	   (copy_from_guest(vcpu, &tmp, (u64) (address +
+	if ((copy_from_user(&tmp, (void __user *)
+		(address + vcpu->arch.sie_block->gmsor) , 1)) ||
+	   (copy_from_user(&tmp, (void __user *)(address +
 			vcpu->arch.sie_block->gmsor + PAGE_SIZE), 1))) {
 		*reg |= SIGP_STAT_INVALID_PARAMETER;
 		return 1; /* invalid parameter */
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index b201135..ff58779 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -343,30 +343,29 @@
 	{
 		.procname	= "cmm_pages",
 		.mode		= 0644,
-		.proc_handler	= &cmm_pages_handler,
+		.proc_handler	= cmm_pages_handler,
 	},
 	{
 		.procname	= "cmm_timed_pages",
 		.mode		= 0644,
-		.proc_handler	= &cmm_pages_handler,
+		.proc_handler	= cmm_pages_handler,
 	},
 	{
 		.procname	= "cmm_timeout",
 		.mode		= 0644,
-		.proc_handler	= &cmm_timeout_handler,
+		.proc_handler	= cmm_timeout_handler,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table cmm_dir_table[] = {
 	{
-		.ctl_name	= CTL_VM,
 		.procname	= "vm",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= cmm_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
diff --git a/arch/score/include/asm/cacheflush.h b/arch/score/include/asm/cacheflush.h
index 07cc8fc..caaba24 100644
--- a/arch/score/include/asm/cacheflush.h
+++ b/arch/score/include/asm/cacheflush.h
@@ -16,6 +16,7 @@
 extern void flush_dcache_range(unsigned long start, unsigned long end);
 
 #define flush_cache_dup_mm(mm)			do {} while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do {} while (0)
 #define flush_dcache_mmap_lock(mapping)		do {} while (0)
 #define flush_dcache_mmap_unlock(mapping)	do {} while (0)
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index 8f305b3..e6dd5e9 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <sound/sh_dac_audio.h>
 #include <asm/hd64461.h>
 #include <asm/io.h>
 #include <mach/hp6xx.h>
@@ -51,9 +52,63 @@
 	.id		= -1,
 };
 
+static void dac_audio_start(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker on */
+	v = inw(HD64461_GPADR);
+	v &= ~HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker on */
+	v8 = inb(PKDR);
+	v8 &= ~PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_enable(pdata->channel);
+}
+
+static void dac_audio_stop(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker off */
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker off */
+	v8 = inb(PKDR);
+	v8 |= PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_output(0, pdata->channel);
+	sh_dac_disable(pdata->channel);
+}
+
+static struct dac_audio_pdata dac_audio_platform_data = {
+	.buffer_size		= 64000,
+	.channel		= 1,
+	.start			= dac_audio_start,
+	.stop			= dac_audio_stop,
+};
+
+static struct platform_device dac_audio_device = {
+	.name		= "dac_audio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dac_audio_platform_data,
+	}
+
+};
+
 static struct platform_device *hp6xx_devices[] __initdata = {
 	&cf_ide_device,
 	&jornadakbd_device,
+	&dac_audio_device,
 };
 
 static void __init hp6xx_init_irq(void)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index e78c3be..0894bba 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -313,6 +313,9 @@
 	.dev	= {
 		.platform_data	= &fsi_info,
 	},
+	.archdata = {
+		.hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
+	},
 };
 
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index c29918f..dda96eb 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -42,6 +42,7 @@
 				unsigned long addr, unsigned long pfn);
 extern void flush_cache_range(struct vm_area_struct *vma,
 				 unsigned long start, unsigned long end);
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void flush_icache_page(struct vm_area_struct *vma,
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
index acf9970..f739061 100644
--- a/arch/sh/include/asm/sh_eth.h
+++ b/arch/sh/include/asm/sh_eth.h
@@ -7,6 +7,7 @@
 	int phy;
 	int edmac_endian;
 
+	unsigned char mac_addr[6];
 	unsigned no_ether_link:1;
 	unsigned ether_link_active_low:1;
 };
diff --git a/arch/sh/include/mach-common/mach/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h
index 0d4165a..bcc301a 100644
--- a/arch/sh/include/mach-common/mach/hp6xx.h
+++ b/arch/sh/include/mach-common/mach/hp6xx.h
@@ -29,6 +29,9 @@
 
 #define PKDR_LED_GREEN		0x10
 
+/* HP Palmtop 620lx/660lx speaker on/off */
+#define PKDR_SPEAKER		0x20
+
 #define SCPDR_TS_SCAN_ENABLE	0x20
 #define SCPDR_TS_SCAN_Y		0x02
 #define SCPDR_TS_SCAN_X		0x01
@@ -42,6 +45,7 @@
 #define ADC_CHANNEL_BACKUP	4
 #define ADC_CHANNEL_CHARGE	5
 
+/* HP Jornada 680/690 speaker on/off */
 #define HD64461_GPADR_SPEAKER	0x01
 #define HD64461_GPADR_PCMCIA0	(0x02|0x08)
 
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 5bfde6c..07d2aae 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -391,3 +391,4 @@
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo
 	.long sys_perf_event_open
+	.long sys_recvmmsg		/* 365 */
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index 267e5eb..75c0cbe 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -877,44 +877,39 @@
 
 static ctl_table unaligned_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "kernel_reports",
 		.data		= &kernel_mode_unaligned_fixup_count,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "user_reports",
 		.data		= &user_mode_unaligned_fixup_count,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "user_enable",
 		.data		= &user_mode_unaligned_fixup_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec},
+		.proc_handler	= proc_dointvec},
 	{}
 };
 
 static ctl_table unaligned_root[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "unaligned_fixup",
 		.mode		= 0555,
-		unaligned_table
+		.child		= unaligned_table
 	},
 	{}
 };
 
 static ctl_table sh64_root[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sh64",
 		.mode		= 0555,
 		.child		= unaligned_root
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 05ef538..33ac1a9 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -221,6 +221,13 @@
 	default y
 	depends on SPARC64 && SMP
 
+config EARLYFB
+	bool "Support for early boot text console"
+	default y
+	depends on SPARC64
+	help
+	  Say Y here to enable a faster early framebuffer boot console.
+
 choice
 	prompt "Kernel page size" if SPARC64
 	default SPARC64_PAGE_SIZE_8KB
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index dfe272d..113225b 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -27,6 +27,7 @@
 LDFLAGS        := -m elf32_sparc
 CHECKFLAGS     += -D__sparc__
 export BITS    := 32
+UTS_MACHINE    := sparc
 
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
@@ -46,6 +47,7 @@
 
 LDFLAGS              := -m elf64_sparc
 export BITS          := 64
+UTS_MACHINE          := sparc64
 
 KBUILD_CFLAGS += -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow   \
                  -ffixed-g4 -ffixed-g5 -fcall-used-g7 -Wno-sign-compare \
diff --git a/arch/sparc/include/asm/btext.h b/arch/sparc/include/asm/btext.h
new file mode 100644
index 0000000..9b2bc6b
--- /dev/null
+++ b/arch/sparc/include/asm/btext.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_BTEXT_H
+#define _SPARC_BTEXT_H
+
+extern int btext_find_display(void);
+
+#endif /* _SPARC_BTEXT_H */
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
index 68ac109..2e46877 100644
--- a/arch/sparc/include/asm/cacheflush_32.h
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -75,6 +75,7 @@
 
 extern void sparc_flush_page_to_ram(struct page *page);
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 #define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
index c433217..b953840 100644
--- a/arch/sparc/include/asm/cacheflush_64.h
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -37,6 +37,7 @@
 #endif
 
 extern void __flush_dcache_range(unsigned long start, unsigned long end);
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *page);
 
 #define flush_icache_page(vma, pg)	do { } while(0)
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
index 28a42b7..3ea5964 100644
--- a/arch/sparc/include/asm/leon.h
+++ b/arch/sparc/include/asm/leon.h
@@ -148,7 +148,7 @@
 	return retval;
 }
 
-extern inline void leon_srmmu_disabletlb(void)
+static inline void leon_srmmu_disabletlb(void)
 {
 	unsigned int retval;
 	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
@@ -158,7 +158,7 @@
 			     "i"(ASI_LEON_MMUREGS) : "memory");
 }
 
-extern inline void leon_srmmu_enabletlb(void)
+static inline void leon_srmmu_enabletlb(void)
 {
 	unsigned int retval;
 	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
@@ -190,7 +190,7 @@
 
 extern unsigned long last_valid_pfn;
 
-extern inline unsigned long sparc_leon3_get_dcachecfg(void)
+static inline unsigned long sparc_leon3_get_dcachecfg(void)
 {
 	unsigned int retval;
 	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
@@ -201,7 +201,7 @@
 }
 
 /* enable snooping */
-extern inline void sparc_leon3_enable_snooping(void)
+static inline void sparc_leon3_enable_snooping(void)
 {
 	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
 			  "set 0x800000, %%l2\n\t"
@@ -209,7 +209,14 @@
 			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
 };
 
-extern inline void sparc_leon3_disable_cache(void)
+static inline int sparc_leon3_snooping_enabled(void)
+{
+	u32 cctrl;
+	__asm__ __volatile__("lda [%%g0] 2, %0\n\t" : "=r"(cctrl));
+        return (cctrl >> 23) & 1;
+};
+
+static inline void sparc_leon3_disable_cache(void)
 {
 	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
 			  "set 0x00000f, %%l2\n\t"
@@ -340,6 +347,30 @@
 extern void leon_switch_mm(void);
 extern int srmmu_swprobe_trace;
 
+#ifdef CONFIG_SMP
+extern int leon_smp_nrcpus(void);
+extern void leon_clear_profile_irq(int cpu);
+extern void leon_smp_done(void);
+extern void leon_boot_cpus(void);
+extern int leon_boot_one_cpu(int i);
+void leon_init_smp(void);
+extern void cpu_probe(void);
+extern void cpu_idle(void);
+extern void init_IRQ(void);
+extern void cpu_panic(void);
+extern int __leon_processor_id(void);
+void leon_enable_irq_cpu(unsigned int irq_nr, unsigned int cpu);
+
+extern unsigned int real_irq_entry[], smpleon_ticker[];
+extern unsigned int patchme_maybe_smp_msg[];
+extern unsigned long trapbase_cpu1[];
+extern unsigned long trapbase_cpu2[];
+extern unsigned long trapbase_cpu3[];
+extern unsigned int t_nmi[], linux_trap_ipi15_leon[];
+extern unsigned int linux_trap_ipi15_sun4m[];
+
+#endif /* CONFIG_SMP */
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */
@@ -356,6 +387,10 @@
 #define leon_switch_mm() do {} while (0)
 #define leon_init_IRQ() do {} while (0)
 #define init_leon() do {} while (0)
+#define leon_smp_done() do {} while (0)
+#define leon_boot_cpus() do {} while (0)
+#define leon_boot_one_cpu(i) 1
+#define leon_init_smp() do {} while (0)
 
 #endif /* !defined(CONFIG_SPARC_LEON) */
 
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index 82a190d..f845828 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -1,3 +1,4 @@
+#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
 #ifndef _SPARC_PROM_H
 #define _SPARC_PROM_H
 #ifdef __KERNEL__
@@ -28,50 +29,11 @@
 #define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcmp((s1), (s2))
 
-typedef u32 phandle;
-typedef u32 ihandle;
-
-struct property {
-	char	*name;
-	int	length;
-	void	*value;
-	struct property *next;
-	unsigned long _flags;
-	unsigned int unique_id;
-};
-
-struct of_irq_controller;
-struct device_node {
-	const char	*name;
-	const char	*type;
-	phandle	node;
-	char	*path_component_name;
-	char	*full_name;
-
-	struct	property *properties;
-	struct  property *deadprops; /* removed properties */
-	struct	device_node *parent;
-	struct	device_node *child;
-	struct	device_node *sibling;
-	struct	device_node *next;	/* next device of same type */
-	struct	device_node *allnext;	/* next in list of all nodes */
-	struct  proc_dir_entry *pde;	/* this node's proc directory */
-	struct  kref kref;
-	unsigned long _flags;
-	void	*data;
-	unsigned int unique_id;
-
-	struct of_irq_controller *irq_trans;
-};
-
 struct of_irq_controller {
 	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
 	void		*data;
 };
 
-#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
-#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
-
 extern struct device_node *of_find_node_by_cpuid(int cpuid);
 extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
 extern struct mutex of_set_property_mutex;
@@ -89,15 +51,6 @@
 extern void of_populate_present_mask(void);
 extern void of_fill_in_cpu_data(void);
 
-/* Dummy ref counting routines - to be implemented later */
-static inline struct device_node *of_node_get(struct device_node *node)
-{
-	return node;
-}
-static inline void of_node_put(struct device_node *node)
-{
-}
-
 /* These routines are here to provide compatibility with how powerpc
  * handles IRQ mapping for OF device nodes.  We precompute and permanently
  * register them in the of_device objects, whereas powerpc computes them
@@ -108,12 +61,6 @@
 {
 }
 
-/*
- * NB:  This is here while we transition from using asm/prom.h
- * to linux/of.h
- */
-#include <linux/of.h>
-
 extern struct device_node *of_console_device;
 extern char *of_console_path;
 extern char *of_console_options;
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
index 1dc129a..6e56210 100644
--- a/arch/sparc/include/asm/rwsem.h
+++ b/arch/sparc/include/asm/rwsem.h
@@ -35,8 +35,8 @@
 #endif
 
 #define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
-  __RWSEM_DEP_MAP_INIT(name) }
+{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
 
 #define DECLARE_RWSEM(name) \
 	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
index 58101dc..841905c 100644
--- a/arch/sparc/include/asm/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
@@ -106,6 +106,15 @@
 	return cpuid;
 }
 
+extern inline int hard_smpleon_processor_id(void)
+{
+	int cpuid;
+	__asm__ __volatile__("rd     %%asr17,%0\n\t"
+			     "srl    %0,28,%0" :
+			     "=&r" (cpuid) : );
+	return cpuid;
+}
+
 #ifndef MODULE
 static inline int hard_smp_processor_id(void)
 {
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 3a5ae3d..9d3fefc 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -56,6 +56,8 @@
 #define SO_TIMESTAMPING		0x0023
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             0x0024
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 42f2316..d8d25bd 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -396,8 +396,9 @@
 #define __NR_pwritev		325
 #define __NR_rt_tgsigqueueinfo	326
 #define __NR_perf_event_open	327
+#define __NR_recvmmsg		328
 
-#define NR_SYSCALLS		328
+#define NR_SYSCALLS		329
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 5b47fab..c631614 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -72,7 +72,7 @@
 obj-$(CONFIG_SPARC32_PCI) += pcic.o
 
 obj-$(CONFIG_SMP)         += trampoline_$(BITS).o smp_$(BITS).o
-obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o
+obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
 obj-$(CONFIG_SPARC64_SMP) += hvtramp.o
 
 obj-y                     += auxio_$(BITS).o
@@ -87,6 +87,7 @@
 obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
 CFLAGS_REMOVE_ftrace.o := -pg
 
+obj-$(CONFIG_EARLYFB) += btext.o
 obj-$(CONFIG_STACKTRACE)     += stacktrace.o
 # sparc64 PCI
 obj-$(CONFIG_SPARC64_PCI)    += pci.o pci_common.o psycho_common.o
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 9c11582..71ec90b 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -76,7 +75,6 @@
 
 static int apc_open(struct inode *inode, struct file *f)
 {
-	cycle_kernel_lock();
 	return 0;
 }
 
@@ -87,61 +85,46 @@
 
 static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
 {
-	__u8 inarg, __user *arg;
-
-	arg = (__u8 __user *) __arg;
-
-	lock_kernel();
+	__u8 inarg, __user *arg = (__u8 __user *) __arg;
 
 	switch (cmd) {
 	case APCIOCGFANCTL:
-		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg)) {
-			unlock_kernel();
+		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg))
 			return -EFAULT;
-		}
 		break;
 
 	case APCIOCGCPWR:
-		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg)) {
-			unlock_kernel();
+		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg))
 			return -EFAULT;
-		}
 		break;
 
 	case APCIOCGBPORT:
-		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg)) {
-			unlock_kernel();
+		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg))
 			return -EFAULT;
-		}
 		break;
 
 	case APCIOCSFANCTL:
-		if (get_user(inarg, arg)) {
-			unlock_kernel();
+		if (get_user(inarg, arg))
 			return -EFAULT;
-		}
 		apc_writeb(inarg & APC_REGMASK, APC_FANCTL_REG);
 		break;
+
 	case APCIOCSCPWR:
-		if (get_user(inarg, arg)) {
-			unlock_kernel();
+		if (get_user(inarg, arg))
 			return -EFAULT;
-		}
 		apc_writeb(inarg & APC_REGMASK, APC_CPOWER_REG);
 		break;
+
 	case APCIOCSBPORT:
-		if (get_user(inarg, arg)) {
-			unlock_kernel();
+		if (get_user(inarg, arg))
 			return -EFAULT;
-		}
 		apc_writeb(inarg & APC_BPMASK, APC_BPORT_REG);
 		break;
+
 	default:
-		unlock_kernel();
 		return -EINVAL;
 	};
 
-	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/sparc/kernel/auxio_32.c b/arch/sparc/kernel/auxio_32.c
index 45c4123..ee8d214 100644
--- a/arch/sparc/kernel/auxio_32.c
+++ b/arch/sparc/kernel/auxio_32.c
@@ -28,6 +28,7 @@
 	struct resource r;
 
 	switch (sparc_cpu_model) {
+	case sparc_leon:
 	case sun4d:
 	case sun4:
 		return;
diff --git a/arch/sparc/kernel/btext.c b/arch/sparc/kernel/btext.c
new file mode 100644
index 0000000..8cc2d56
--- /dev/null
+++ b/arch/sparc/kernel/btext.c
@@ -0,0 +1,673 @@
+/*
+ * Procedures for drawing on the screen early on in the boot process.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/console.h>
+
+#include <asm/btext.h>
+#include <asm/oplib.h>
+#include <asm/io.h>
+
+#define NO_SCROLL
+
+#ifndef NO_SCROLL
+static void scrollscreen(void);
+#endif
+
+static void draw_byte(unsigned char c, long locX, long locY);
+static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb);
+static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb);
+static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb);
+
+#define __force_data __attribute__((__section__(".data")))
+
+static int g_loc_X __force_data;
+static int g_loc_Y __force_data;
+static int g_max_loc_X __force_data;
+static int g_max_loc_Y __force_data;
+
+static int dispDeviceRowBytes __force_data;
+static int dispDeviceDepth  __force_data;
+static int dispDeviceRect[4] __force_data;
+static unsigned char *dispDeviceBase __force_data;
+
+#define cmapsz	(16*256)
+
+static unsigned char vga_font[cmapsz];
+
+static int __init btext_initialize(unsigned int node)
+{
+	unsigned int width, height, depth, pitch;
+	unsigned long address = 0;
+	u32 prop;
+
+	if (prom_getproperty(node, "width", (char *)&width, 4) < 0)
+		return -EINVAL;
+	if (prom_getproperty(node, "height", (char *)&height, 4) < 0)
+		return -EINVAL;
+	if (prom_getproperty(node, "depth", (char *)&depth, 4) < 0)
+		return -EINVAL;
+	pitch = width * ((depth + 7) / 8);
+
+	if (prom_getproperty(node, "linebytes", (char *)&prop, 4) >= 0 &&
+	    prop != 0xffffffffu)
+		pitch = prop;
+
+	if (pitch == 1)
+		pitch = 0x1000;
+
+	if (prom_getproperty(node, "address", (char *)&prop, 4) >= 0)
+		address = prop;
+
+	/* FIXME: Add support for PCI reg properties. Right now, only
+	 * reliable on macs
+	 */
+	if (address == 0)
+		return -EINVAL;
+
+	g_loc_X = 0;
+	g_loc_Y = 0;
+	g_max_loc_X = width / 8;
+	g_max_loc_Y = height / 16;
+	dispDeviceBase = (unsigned char *)address;
+	dispDeviceRowBytes = pitch;
+	dispDeviceDepth = depth == 15 ? 16 : depth;
+	dispDeviceRect[0] = dispDeviceRect[1] = 0;
+	dispDeviceRect[2] = width;
+	dispDeviceRect[3] = height;
+
+	return 0;
+}
+
+/* Calc the base address of a given point (x,y) */
+static unsigned char * calc_base(int x, int y)
+{
+	unsigned char *base = dispDeviceBase;
+
+	base += (x + dispDeviceRect[0]) * (dispDeviceDepth >> 3);
+	base += (y + dispDeviceRect[1]) * dispDeviceRowBytes;
+	return base;
+}
+
+static void btext_clearscreen(void)
+{
+	unsigned int *base	= (unsigned int *)calc_base(0, 0);
+	unsigned long width 	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
+					(dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++)
+	{
+		unsigned int *ptr = base;
+		for(j=width; j; --j)
+			*(ptr++) = 0;
+		base += (dispDeviceRowBytes >> 2);
+	}
+}
+
+#ifndef NO_SCROLL
+static void scrollscreen(void)
+{
+	unsigned int *src     	= (unsigned int *)calc_base(0,16);
+	unsigned int *dst     	= (unsigned int *)calc_base(0,0);
+	unsigned long width    	= ((dispDeviceRect[2] - dispDeviceRect[0]) *
+				   (dispDeviceDepth >> 3)) >> 2;
+	int i,j;
+
+	for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++)
+	{
+		unsigned int *src_ptr = src;
+		unsigned int *dst_ptr = dst;
+		for(j=width; j; --j)
+			*(dst_ptr++) = *(src_ptr++);
+		src += (dispDeviceRowBytes >> 2);
+		dst += (dispDeviceRowBytes >> 2);
+	}
+	for (i=0; i<16; i++)
+	{
+		unsigned int *dst_ptr = dst;
+		for(j=width; j; --j)
+			*(dst_ptr++) = 0;
+		dst += (dispDeviceRowBytes >> 2);
+	}
+}
+#endif /* ndef NO_SCROLL */
+
+void btext_drawchar(char c)
+{
+	int cline = 0;
+#ifdef NO_SCROLL
+	int x;
+#endif
+	switch (c) {
+	case '\b':
+		if (g_loc_X > 0)
+			--g_loc_X;
+		break;
+	case '\t':
+		g_loc_X = (g_loc_X & -8) + 8;
+		break;
+	case '\r':
+		g_loc_X = 0;
+		break;
+	case '\n':
+		g_loc_X = 0;
+		g_loc_Y++;
+		cline = 1;
+		break;
+	default:
+		draw_byte(c, g_loc_X++, g_loc_Y);
+	}
+	if (g_loc_X >= g_max_loc_X) {
+		g_loc_X = 0;
+		g_loc_Y++;
+		cline = 1;
+	}
+#ifndef NO_SCROLL
+	while (g_loc_Y >= g_max_loc_Y) {
+		scrollscreen();
+		g_loc_Y--;
+	}
+#else
+	/* wrap around from bottom to top of screen so we don't
+	   waste time scrolling each line.  -- paulus. */
+	if (g_loc_Y >= g_max_loc_Y)
+		g_loc_Y = 0;
+	if (cline) {
+		for (x = 0; x < g_max_loc_X; ++x)
+			draw_byte(' ', x, g_loc_Y);
+	}
+#endif
+}
+
+static void btext_drawtext(const char *c, unsigned int len)
+{
+	while (len--)
+		btext_drawchar(*c++);
+}
+
+static void draw_byte(unsigned char c, long locX, long locY)
+{
+	unsigned char *base	= calc_base(locX << 3, locY << 4);
+	unsigned char *font	= &vga_font[((unsigned int)c) * 16];
+	int rb			= dispDeviceRowBytes;
+
+	switch(dispDeviceDepth) {
+	case 24:
+	case 32:
+		draw_byte_32(font, (unsigned int *)base, rb);
+		break;
+	case 15:
+	case 16:
+		draw_byte_16(font, (unsigned int *)base, rb);
+		break;
+	case 8:
+		draw_byte_8(font, (unsigned int *)base, rb);
+		break;
+	}
+}
+
+static unsigned int expand_bits_8[16] = {
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff,
+	0xff000000,
+	0xff0000ff,
+	0xff00ff00,
+	0xff00ffff,
+	0xffff0000,
+	0xffff00ff,
+	0xffffff00,
+	0xffffffff
+};
+
+static unsigned int expand_bits_16[4] = {
+	0x00000000,
+	0x0000ffff,
+	0xffff0000,
+	0xffffffff
+};
+
+
+static void draw_byte_32(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (-(bits >> 7) & fg) ^ bg;
+		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
+		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
+		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
+		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
+		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
+		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
+		base[7] = (-(bits & 1) & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static void draw_byte_16(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0xFFFFFFFFUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_16;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 6] & fg) ^ bg;
+		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
+		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
+		base[3] = (eb[bits & 3] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static void draw_byte_8(unsigned char *font, unsigned int *base, int rb)
+{
+	int l, bits;
+	int fg = 0x0F0F0F0FUL;
+	int bg = 0x00000000UL;
+	unsigned int *eb = (int *)expand_bits_8;
+
+	for (l = 0; l < 16; ++l)
+	{
+		bits = *font++;
+		base[0] = (eb[bits >> 4] & fg) ^ bg;
+		base[1] = (eb[bits & 0xf] & fg) ^ bg;
+		base = (unsigned int *) ((char *)base + rb);
+	}
+}
+
+static void btext_console_write(struct console *con, const char *s,
+				unsigned int n)
+{
+	btext_drawtext(s, n);
+}
+
+static struct console btext_console = {
+	.name	= "btext",
+	.write	= btext_console_write,
+	.flags	= CON_PRINTBUFFER | CON_ENABLED | CON_BOOT | CON_ANYTIME,
+	.index	= 0,
+};
+
+int __init btext_find_display(void)
+{
+	unsigned int node;
+	char type[32];
+	int ret;
+
+	node = prom_inst2pkg(prom_stdout);
+	if (prom_getproperty(node, "device_type", type, 32) < 0)
+		return -ENODEV;
+	if (strcmp(type, "display"))
+		return -ENODEV;
+
+	ret = btext_initialize(node);
+	if (!ret) {
+		btext_clearscreen();
+		register_console(&btext_console);
+	}
+	return ret;
+}
+
+static unsigned char vga_font[cmapsz] = {
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
+0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
+0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
+0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
+0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
+0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
+0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
+0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
+0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
+0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
+0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
+0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
+0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
+0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
+0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
+0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
+0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
+0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
+0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
+0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
+0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
+0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
+0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
+0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
+0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
+0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
+0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
+0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
+0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
+0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
+0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
+0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
+0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
+0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
+0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
+0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
+0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
+0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
+0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
+0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
+0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
+0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
+0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
+0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
+0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
+0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
+0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
+0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
+0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
+0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
+0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
+0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
+0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
+0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
+0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
+0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
+0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
+0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
+0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
+0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
+0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
+0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
+0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
+0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
+0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
+0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
+0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
+0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
+0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
+0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
+0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
+0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
+0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
+0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
+0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
+0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
+0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
+0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
+0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
+0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
+0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
+0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
+0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
+0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
+0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
+0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
+0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
+0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
+0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
+0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
+0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
+0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
+0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
+0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
+0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
+0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
+0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
+0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
+0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
+0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
+0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
+0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
+0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
+0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
+0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
+0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
+0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
+0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
+0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
+0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
+0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
+0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+0x00, 0x00, 0x00, 0x00,
+};
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 1446df9..e447938 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -185,6 +185,17 @@
 		FPU(-1, NULL)
 	}
 },{
+	0xF,		/* Aeroflex Gaisler */
+	.cpu_info = {
+		CPU(3, "LEON"),
+		CPU(-1, NULL)
+	},
+	.fpu_info = {
+		FPU(2, "GRFPU"),
+		FPU(3, "GRFPU-Lite"),
+		FPU(-1, NULL)
+	}
+},{
 	0x17,
 	.cpu_info = {
 		CPU_PMU(0x10, "TI UltraSparc I   (SpitFire)", "ultra12"),
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index f41ecc5..ec9c7bc 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -400,6 +400,39 @@
 	/* FIXME */
 1:	b,a	1b
 
+#ifdef CONFIG_SPARC_LEON
+
+	.globl	smpleon_ticker
+	/* SMP per-cpu ticker interrupts are handled specially. */
+smpleon_ticker:
+        SAVE_ALL
+	or	%l0, PSR_PIL, %g2
+	wr	%g2, 0x0, %psr
+	WRITE_PAUSE
+	wr	%g2, PSR_ET, %psr
+	WRITE_PAUSE
+	call	leon_percpu_timer_interrupt
+	 add	%sp, STACKFRAME_SZ, %o0
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+	RESTORE_ALL
+
+	.align	4
+	.globl	linux_trap_ipi15_leon
+linux_trap_ipi15_leon:
+	SAVE_ALL
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	call	leon_cross_call_irq
+	 nop
+	b	ret_trap_lockless_ipi
+	 clr	%l6
+
+#endif /* CONFIG_SPARC_LEON */
+
 #endif /* CONFIG_SMP */
 
 	/* This routine handles illegal instructions and privileged
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 439d82a..21bb259 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -811,9 +811,31 @@
 got_prop:
 #ifdef CONFIG_SPARC_LEON
 	        /* no cpu-type check is needed, it is a SPARC-LEON */
+#ifdef CONFIG_SMP
+		ba leon_smp_init
+		 nop
+
+		.global leon_smp_init
+leon_smp_init:
+		sethi	%hi(boot_cpu_id), %g1    ! master always 0
+		stb	%g0, [%g1 + %lo(boot_cpu_id)]
+		sethi	%hi(boot_cpu_id4), %g1   ! master always 0
+		stb	%g0, [%g1 + %lo(boot_cpu_id4)]
+
+		rd     %asr17,%g1
+		srl    %g1,28,%g1
+
+		cmp %g0,%g1
+		 beq sun4c_continue_boot         !continue with master
+		nop
+
+		ba leon_smp_cpu_startup
+		 nop
+#else
 		ba sun4c_continue_boot
 		 nop
 #endif
+#endif
 		set	cputypval, %o2
 		ldub	[%o2 + 0x4], %l1
 
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 9f61fd8..3c8c44f 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -48,8 +48,13 @@
 #include <asm/dma.h>
 #include <asm/iommu.h>
 #include <asm/io-unit.h>
+#include <asm/leon.h>
 
+#ifdef CONFIG_SPARC_LEON
+#define mmu_inval_dma_area(p, l) leon_flush_dcache_all()
+#else
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
+#endif
 
 static struct resource *_sparc_find_resource(struct resource *r,
 					     unsigned long);
diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c
index 8ab1d47..ce996f9 100644
--- a/arch/sparc/kernel/irq_64.c
+++ b/arch/sparc/kernel/irq_64.c
@@ -187,7 +187,7 @@
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
 #endif
-		seq_printf(p, " %9s", irq_desc[i].chip->typename);
+		seq_printf(p, " %9s", irq_desc[i].chip->name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)
@@ -484,7 +484,7 @@
 }
 
 static struct irq_chip sun4u_irq = {
-	.typename	= "sun4u",
+	.name		= "sun4u",
 	.enable		= sun4u_irq_enable,
 	.disable	= sun4u_irq_disable,
 	.eoi		= sun4u_irq_eoi,
@@ -492,7 +492,7 @@
 };
 
 static struct irq_chip sun4v_irq = {
-	.typename	= "sun4v",
+	.name		= "sun4v",
 	.enable		= sun4v_irq_enable,
 	.disable	= sun4v_irq_disable,
 	.eoi		= sun4v_irq_eoi,
@@ -500,7 +500,7 @@
 };
 
 static struct irq_chip sun4v_virq = {
-	.typename	= "vsun4v",
+	.name		= "vsun4v",
 	.enable		= sun4v_virq_enable,
 	.disable	= sun4v_virq_disable,
 	.eoi		= sun4v_virq_eoi,
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 54d8a5b..87f1760 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -12,11 +12,14 @@
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
 #include <linux/of_device.h>
+
 #include <asm/oplib.h>
 #include <asm/timer.h>
 #include <asm/prom.h>
 #include <asm/leon.h>
 #include <asm/leon_amba.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
 
 #include "prom.h"
 #include "irq.h"
@@ -115,6 +118,21 @@
 				      (((1000000 / 100) - 1)));
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
 
+#ifdef CONFIG_SMP
+		leon_percpu_timer_dev[0].start = (int)leon3_gptimer_regs;
+		leon_percpu_timer_dev[0].irq = leon3_gptimer_irq+1;
+
+		if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
+		      (1<<LEON3_GPTIMER_SEPIRQ))) {
+			prom_printf("irq timer not configured with seperate irqs \n");
+			BUG();
+		}
+
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
+# endif
+
 	} else {
 		printk(KERN_ERR "No Timer/irqctrl found\n");
 		BUG();
@@ -130,11 +148,41 @@
 		prom_halt();
 	}
 
+# ifdef CONFIG_SMP
+	{
+		unsigned long flags;
+		struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (leon_percpu_timer_dev[0].irq - 1)];
+
+		/* For SMP we use the level 14 ticker, however the bootup code
+		 * has copied the firmwares level 14 vector into boot cpu's
+		 * trap table, we must fix this now or we get squashed.
+		 */
+		local_irq_save(flags);
+
+		patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
+
+		/* Adjust so that we jump directly to smpleon_ticker */
+		trap_table->inst_three += smpleon_ticker - real_irq_entry;
+
+		local_flush_cache_all();
+		local_irq_restore(flags);
+	}
+# endif
+
 	if (leon3_gptimer_regs) {
 		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl,
 				      LEON3_GPTIMER_EN |
 				      LEON3_GPTIMER_RL |
 				      LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+
+#ifdef CONFIG_SMP
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl,
+				      LEON3_GPTIMER_EN |
+				      LEON3_GPTIMER_RL |
+				      LEON3_GPTIMER_LD |
+				      LEON3_GPTIMER_IRQEN);
+#endif
+
 	}
 }
 
@@ -175,6 +223,42 @@
 	}
 }
 
+#ifdef CONFIG_SMP
+
+void leon_set_cpu_int(int cpu, int level)
+{
+	unsigned long mask;
+	mask = get_irqmask(level);
+	LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->force[cpu], mask);
+}
+
+static void leon_clear_ipi(int cpu, int level)
+{
+	unsigned long mask;
+	mask = get_irqmask(level);
+	LEON3_BYPASS_STORE_PA(&leon3_irqctrl_regs->force[cpu], mask<<16);
+}
+
+static void leon_set_udt(int cpu)
+{
+}
+
+void leon_clear_profile_irq(int cpu)
+{
+}
+
+void leon_enable_irq_cpu(unsigned int irq_nr, unsigned int cpu)
+{
+	unsigned long mask, flags, *addr;
+	mask = get_irqmask(irq_nr);
+	local_irq_save(flags);
+	addr = (unsigned long *)&(leon3_irqctrl_regs->mask[cpu]);
+	LEON3_BYPASS_STORE_PA(addr, (LEON3_BYPASS_LOAD_PA(addr) | (mask)));
+	local_irq_restore(flags);
+}
+
+#endif
+
 void __init leon_init_IRQ(void)
 {
 	sparc_init_timers = leon_init_timers;
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
new file mode 100644
index 0000000..05c0dad
--- /dev/null
+++ b/arch/sparc/kernel/leon_smp.c
@@ -0,0 +1,468 @@
+/* leon_smp.c: Sparc-Leon SMP support.
+ *
+ * based on sun4m_smp.c
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#include <asm/head.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/profile.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq_regs.h>
+
+#include <asm/delay.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/oplib.h>
+#include <asm/cpudata.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
+
+#ifdef CONFIG_SPARC_LEON
+
+#include "irq.h"
+
+extern ctxd_t *srmmu_ctx_table_phys;
+static int smp_processors_ready;
+extern volatile unsigned long cpu_callin_map[NR_CPUS];
+extern unsigned char boot_cpu_id;
+extern cpumask_t smp_commenced_mask;
+void __init leon_configure_cache_smp(void);
+
+static inline unsigned long do_swap(volatile unsigned long *ptr,
+				    unsigned long val)
+{
+	__asm__ __volatile__("swapa [%1] %2, %0\n\t" : "=&r"(val)
+			     : "r"(ptr), "i"(ASI_LEON_DCACHE_MISS)
+			     : "memory");
+	return val;
+}
+
+static void smp_setup_percpu_timer(void);
+
+void __cpuinit leon_callin(void)
+{
+	int cpuid = hard_smpleon_processor_id();
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+	leon_configure_cache_smp();
+
+	/* Get our local ticker going. */
+	smp_setup_percpu_timer();
+
+	calibrate_delay();
+	smp_store_cpu_info(cpuid);
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+
+	/*
+	 * Unblock the master CPU _only_ when the scheduler state
+	 * of all secondary CPUs will be up-to-date, so after
+	 * the SMP initialization the master will be just allowed
+	 * to call the scheduler code.
+	 * Allow master to continue.
+	 */
+	do_swap(&cpu_callin_map[cpuid], 1);
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+
+	cpu_probe();
+
+	/* Fix idle thread fields. */
+	__asm__ __volatile__("ld [%0], %%g6\n\t" : : "r"(&current_set[cpuid])
+			     : "memory" /* paranoid */);
+
+	/* Attach to the address space of init_task. */
+	atomic_inc(&init_mm.mm_count);
+	current->active_mm = &init_mm;
+
+	while (!cpu_isset(cpuid, smp_commenced_mask))
+		mb();
+
+	local_irq_enable();
+	cpu_set(cpuid, cpu_online_map);
+}
+
+/*
+ *	Cycle through the processors asking the PROM to start each one.
+ */
+
+extern struct linux_prom_registers smp_penguin_ctable;
+
+void __init leon_configure_cache_smp(void)
+{
+	unsigned long cfg = sparc_leon3_get_dcachecfg();
+	int me = smp_processor_id();
+
+	if (ASI_LEON3_SYSCTRL_CFG_SSIZE(cfg) > 4) {
+		printk(KERN_INFO "Note: SMP with snooping only works on 4k cache, found %dk(0x%x) on cpu %d, disabling caches\n",
+		     (unsigned int)ASI_LEON3_SYSCTRL_CFG_SSIZE(cfg),
+		     (unsigned int)cfg, (unsigned int)me);
+		sparc_leon3_disable_cache();
+	} else {
+		if (cfg & ASI_LEON3_SYSCTRL_CFG_SNOOPING) {
+			sparc_leon3_enable_snooping();
+		} else {
+			printk(KERN_INFO "Note: You have to enable snooping in the vhdl model cpu %d, disabling caches\n",
+			     me);
+			sparc_leon3_disable_cache();
+		}
+	}
+
+	local_flush_cache_all();
+	local_flush_tlb_all();
+}
+
+void leon_smp_setbroadcast(unsigned int mask)
+{
+	int broadcast =
+	    ((LEON3_BYPASS_LOAD_PA(&(leon3_irqctrl_regs->mpstatus)) >>
+	      LEON3_IRQMPSTATUS_BROADCAST) & 1);
+	if (!broadcast) {
+		prom_printf("######## !!!! The irqmp-ctrl must have broadcast enabled, smp wont work !!!!! ####### nr cpus: %d\n",
+		     leon_smp_nrcpus());
+		if (leon_smp_nrcpus() > 1) {
+			BUG();
+		} else {
+			prom_printf("continue anyway\n");
+			return;
+		}
+	}
+	LEON_BYPASS_STORE_PA(&(leon3_irqctrl_regs->mpbroadcast), mask);
+}
+
+unsigned int leon_smp_getbroadcast(void)
+{
+	unsigned int mask;
+	mask = LEON_BYPASS_LOAD_PA(&(leon3_irqctrl_regs->mpbroadcast));
+	return mask;
+}
+
+int leon_smp_nrcpus(void)
+{
+	int nrcpu =
+	    ((LEON3_BYPASS_LOAD_PA(&(leon3_irqctrl_regs->mpstatus)) >>
+	      LEON3_IRQMPSTATUS_CPUNR) & 0xf) + 1;
+	return nrcpu;
+}
+
+void __init leon_boot_cpus(void)
+{
+	int nrcpu = leon_smp_nrcpus();
+	int me = smp_processor_id();
+
+	printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x \n", (unsigned int)me,
+	       (unsigned int)nrcpu, (unsigned int)NR_CPUS,
+	       (unsigned int)&(leon3_irqctrl_regs->mpstatus));
+
+	leon_enable_irq_cpu(LEON3_IRQ_CROSS_CALL, me);
+	leon_enable_irq_cpu(LEON3_IRQ_TICKER, me);
+	leon_enable_irq_cpu(LEON3_IRQ_RESCHEDULE, me);
+
+	leon_smp_setbroadcast(1 << LEON3_IRQ_TICKER);
+
+	leon_configure_cache_smp();
+	smp_setup_percpu_timer();
+	local_flush_cache_all();
+
+}
+
+int __cpuinit leon_boot_one_cpu(int i)
+{
+
+	struct task_struct *p;
+	int timeout;
+
+	/* Cook up an idler for this guy. */
+	p = fork_idle(i);
+
+	current_set[i] = task_thread_info(p);
+
+	/* See trampoline.S:leon_smp_cpu_startup for details...
+	 * Initialize the contexts table
+	 * Since the call to prom_startcpu() trashes the structure,
+	 * we need to re-initialize it for each cpu
+	 */
+	smp_penguin_ctable.which_io = 0;
+	smp_penguin_ctable.phys_addr = (unsigned int)srmmu_ctx_table_phys;
+	smp_penguin_ctable.reg_size = 0;
+
+	/* whirrr, whirrr, whirrrrrrrrr... */
+	printk(KERN_INFO "Starting CPU %d : (irqmp: 0x%x)\n", (unsigned int)i,
+	       (unsigned int)&leon3_irqctrl_regs->mpstatus);
+	local_flush_cache_all();
+
+	LEON_BYPASS_STORE_PA(&(leon3_irqctrl_regs->mpstatus), 1 << i);
+
+	/* wheee... it's going... */
+	for (timeout = 0; timeout < 10000; timeout++) {
+		if (cpu_callin_map[i])
+			break;
+		udelay(200);
+	}
+	printk(KERN_INFO "Started CPU %d \n", (unsigned int)i);
+
+	if (!(cpu_callin_map[i])) {
+		printk(KERN_ERR "Processor %d is stuck.\n", i);
+		return -ENODEV;
+	} else {
+		leon_enable_irq_cpu(LEON3_IRQ_CROSS_CALL, i);
+		leon_enable_irq_cpu(LEON3_IRQ_TICKER, i);
+		leon_enable_irq_cpu(LEON3_IRQ_RESCHEDULE, i);
+	}
+
+	local_flush_cache_all();
+	return 0;
+}
+
+void __init leon_smp_done(void)
+{
+
+	int i, first;
+	int *prev;
+
+	/* setup cpu list for irq rotation */
+	first = 0;
+	prev = &first;
+	for (i = 0; i < NR_CPUS; i++) {
+		if (cpu_online(i)) {
+			*prev = i;
+			prev = &cpu_data(i).next;
+		}
+	}
+	*prev = first;
+	local_flush_cache_all();
+
+	/* Free unneeded trap tables */
+	if (!cpu_isset(1, cpu_present_map)) {
+		ClearPageReserved(virt_to_page(trapbase_cpu1));
+		init_page_count(virt_to_page(trapbase_cpu1));
+		free_page((unsigned long)trapbase_cpu1);
+		totalram_pages++;
+		num_physpages++;
+	}
+	if (!cpu_isset(2, cpu_present_map)) {
+		ClearPageReserved(virt_to_page(trapbase_cpu2));
+		init_page_count(virt_to_page(trapbase_cpu2));
+		free_page((unsigned long)trapbase_cpu2);
+		totalram_pages++;
+		num_physpages++;
+	}
+	if (!cpu_isset(3, cpu_present_map)) {
+		ClearPageReserved(virt_to_page(trapbase_cpu3));
+		init_page_count(virt_to_page(trapbase_cpu3));
+		free_page((unsigned long)trapbase_cpu3);
+		totalram_pages++;
+		num_physpages++;
+	}
+	/* Ok, they are spinning and ready to go. */
+	smp_processors_ready = 1;
+
+}
+
+void leon_irq_rotate(int cpu)
+{
+}
+
+static struct smp_funcall {
+	smpfunc_t func;
+	unsigned long arg1;
+	unsigned long arg2;
+	unsigned long arg3;
+	unsigned long arg4;
+	unsigned long arg5;
+	unsigned long processors_in[NR_CPUS];	/* Set when ipi entered. */
+	unsigned long processors_out[NR_CPUS];	/* Set when ipi exited. */
+} ccall_info;
+
+static DEFINE_SPINLOCK(cross_call_lock);
+
+/* Cross calls must be serialized, at least currently. */
+static void leon_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			    unsigned long arg2, unsigned long arg3,
+			    unsigned long arg4)
+{
+	if (smp_processors_ready) {
+		register int high = NR_CPUS - 1;
+		unsigned long flags;
+
+		spin_lock_irqsave(&cross_call_lock, flags);
+
+		{
+			/* If you make changes here, make sure gcc generates proper code... */
+			register smpfunc_t f asm("i0") = func;
+			register unsigned long a1 asm("i1") = arg1;
+			register unsigned long a2 asm("i2") = arg2;
+			register unsigned long a3 asm("i3") = arg3;
+			register unsigned long a4 asm("i4") = arg4;
+			register unsigned long a5 asm("i5") = 0;
+
+			__asm__ __volatile__("std %0, [%6]\n\t"
+					     "std %2, [%6 + 8]\n\t"
+					     "std %4, [%6 + 16]\n\t" : :
+					     "r"(f), "r"(a1), "r"(a2), "r"(a3),
+					     "r"(a4), "r"(a5),
+					     "r"(&ccall_info.func));
+		}
+
+		/* Init receive/complete mapping, plus fire the IPI's off. */
+		{
+			register int i;
+
+			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
+			for (i = 0; i <= high; i++) {
+				if (cpu_isset(i, mask)) {
+					ccall_info.processors_in[i] = 0;
+					ccall_info.processors_out[i] = 0;
+					set_cpu_int(i, LEON3_IRQ_CROSS_CALL);
+
+				}
+			}
+		}
+
+		{
+			register int i;
+
+			i = 0;
+			do {
+				if (!cpu_isset(i, mask))
+					continue;
+
+				while (!ccall_info.processors_in[i])
+					barrier();
+			} while (++i <= high);
+
+			i = 0;
+			do {
+				if (!cpu_isset(i, mask))
+					continue;
+
+				while (!ccall_info.processors_out[i])
+					barrier();
+			} while (++i <= high);
+		}
+
+		spin_unlock_irqrestore(&cross_call_lock, flags);
+	}
+}
+
+/* Running cross calls. */
+void leon_cross_call_irq(void)
+{
+	int i = smp_processor_id();
+
+	ccall_info.processors_in[i] = 1;
+	ccall_info.func(ccall_info.arg1, ccall_info.arg2, ccall_info.arg3,
+			ccall_info.arg4, ccall_info.arg5);
+	ccall_info.processors_out[i] = 1;
+}
+
+void leon_percpu_timer_interrupt(struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	int cpu = smp_processor_id();
+
+	old_regs = set_irq_regs(regs);
+
+	leon_clear_profile_irq(cpu);
+
+	profile_tick(CPU_PROFILING);
+
+	if (!--prof_counter(cpu)) {
+		int user = user_mode(regs);
+
+		irq_enter();
+		update_process_times(user);
+		irq_exit();
+
+		prof_counter(cpu) = prof_multiplier(cpu);
+	}
+	set_irq_regs(old_regs);
+}
+
+static void __init smp_setup_percpu_timer(void)
+{
+	int cpu = smp_processor_id();
+
+	prof_counter(cpu) = prof_multiplier(cpu) = 1;
+}
+
+void __init leon_blackbox_id(unsigned *addr)
+{
+	int rd = *addr & 0x3e000000;
+	int rs1 = rd >> 11;
+
+	/* patch places where ___b_hard_smp_processor_id appears */
+	addr[0] = 0x81444000 | rd;	/* rd %asr17, reg */
+	addr[1] = 0x8130201c | rd | rs1;	/* srl reg, 0x1c, reg */
+	addr[2] = 0x01000000;	/* nop */
+}
+
+void __init leon_blackbox_current(unsigned *addr)
+{
+	int rd = *addr & 0x3e000000;
+	int rs1 = rd >> 11;
+
+	/* patch LOAD_CURRENT macro where ___b_load_current appears */
+	addr[0] = 0x81444000 | rd;	/* rd %asr17, reg */
+	addr[2] = 0x8130201c | rd | rs1;	/* srl reg, 0x1c, reg */
+	addr[4] = 0x81282002 | rd | rs1;	/* sll reg, 0x2, reg */
+
+}
+
+/*
+ * CPU idle callback function
+ * See .../arch/sparc/kernel/process.c
+ */
+void pmc_leon_idle(void)
+{
+	__asm__ volatile ("mov %g0, %asr19");
+}
+
+void __init leon_init_smp(void)
+{
+	/* Patch ipi15 trap table */
+	t_nmi[1] = t_nmi[1] + (linux_trap_ipi15_leon - linux_trap_ipi15_sun4m);
+
+	BTFIXUPSET_BLACKBOX(hard_smp_processor_id, leon_blackbox_id);
+	BTFIXUPSET_BLACKBOX(load_current, leon_blackbox_current);
+	BTFIXUPSET_CALL(smp_cross_call, leon_cross_call, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(__hard_smp_processor_id, __leon_processor_id,
+			BTFIXUPCALL_NORM);
+
+#ifndef PMC_NO_IDLE
+	/* Assign power management IDLE handler */
+	pm_idle = pmc_leon_idle;
+	printk(KERN_INFO "leon: power management initialized\n");
+#endif
+
+}
+
+#endif /* CONFIG_SPARC_LEON */
diff --git a/arch/sparc/kernel/pci_msi.c b/arch/sparc/kernel/pci_msi.c
index f1be37a..e1b0541 100644
--- a/arch/sparc/kernel/pci_msi.c
+++ b/arch/sparc/kernel/pci_msi.c
@@ -112,7 +112,7 @@
 }
 
 static struct irq_chip msi_irq = {
-	.typename	= "PCI-MSI",
+	.name		= "PCI-MSI",
 	.mask		= mask_msi_irq,
 	.unmask		= unmask_msi_irq,
 	.enable		= unmask_msi_irq,
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 2118033..a2a79e7 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -46,6 +46,7 @@
 #include <asm/setup.h>
 #include <asm/mmu.h>
 #include <asm/ns87303.h>
+#include <asm/btext.h>
 
 #ifdef CONFIG_IP_PNP
 #include <net/ipconfig.h>
@@ -286,7 +287,10 @@
 	parse_early_param();
 
 	boot_flags_init(*cmdline_p);
-	register_console(&prom_early_console);
+#ifdef CONFIG_EARLYFB
+	if (btext_find_display())
+#endif
+		register_console(&prom_early_console);
 
 	if (tlb_type == hypervisor)
 		printk("ARCH: SUN4V\n");
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index 132d81f..91c10fb 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -32,6 +32,7 @@
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/cpudata.h>
+#include <asm/leon.h>
 
 #include "irq.h"
 
@@ -96,6 +97,9 @@
 	case sun4d:
 		smp4d_smp_done();
 		break;
+	case sparc_leon:
+		leon_smp_done();
+		break;
 	case sun4e:
 		printk("SUN4E\n");
 		BUG();
@@ -306,6 +310,9 @@
 	case sun4d:
 		smp4d_boot_cpus();
 		break;
+	case sparc_leon:
+		leon_boot_cpus();
+		break;
 	case sun4e:
 		printk("SUN4E\n");
 		BUG();
@@ -376,6 +383,9 @@
 	case sun4d:
 		ret = smp4d_boot_one_cpu(cpu);
 		break;
+	case sparc_leon:
+		ret = leon_boot_one_cpu(cpu);
+		break;
 	case sun4e:
 		printk("SUN4E\n");
 		BUG();
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index 04e28b2..00abe87e5 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -26,11 +26,6 @@
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
 #include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
 #include <linux/poll.h>
 #include <linux/personality.h>
 #include <linux/stat.h>
@@ -591,63 +586,6 @@
 	return ret;       
 }
 
-struct __sysctl_args32 {
-	u32 name;
-	int nlen;
-	u32 oldval;
-	u32 oldlenp;
-	u32 newval;
-	u32 newlen;
-	u32 __unused[4];
-};
-
-asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
-{
-#ifndef CONFIG_SYSCTL_SYSCALL
-	return -ENOSYS;
-#else
-	struct __sysctl_args32 tmp;
-	int error;
-	size_t oldlen, __user *oldlenp = NULL;
-	unsigned long addr = (((unsigned long)&args->__unused[0]) + 7UL) & ~7UL;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	if (tmp.oldval && tmp.oldlenp) {
-		/* Duh, this is ugly and might not work if sysctl_args
-		   is in read-only memory, but do_sysctl does indirectly
-		   a lot of uaccess in both directions and we'd have to
-		   basically copy the whole sysctl.c here, and
-		   glibc's __sysctl uses rw memory for the structure
-		   anyway.  */
-		if (get_user(oldlen, (u32 __user *)(unsigned long)tmp.oldlenp) ||
-		    put_user(oldlen, (size_t __user *)addr))
-			return -EFAULT;
-		oldlenp = (size_t __user *)addr;
-	}
-
-	lock_kernel();
-	error = do_sysctl((int __user *)(unsigned long) tmp.name,
-			  tmp.nlen,
-			  (void __user *)(unsigned long) tmp.oldval,
-			  oldlenp,
-			  (void __user *)(unsigned long) tmp.newval,
-			  tmp.newlen);
-	unlock_kernel();
-	if (oldlenp) {
-		if (!error) {
-			if (get_user(oldlen, (size_t __user *)addr) ||
-			    put_user(oldlen, (u32 __user *)(unsigned long) tmp.oldlenp))
-				error = -EFAULT;
-		}
-		if (copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused)))
-			error = -EFAULT;
-	}
-	return error;
-#endif
-}
-
 long sys32_lookup_dcookie(unsigned long cookie_high,
 			  unsigned long cookie_low,
 			  char __user *buf, size_t len)
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 0f1658d..ceb1530 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -82,5 +82,5 @@
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 009825f..cc8e786 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -68,7 +68,7 @@
 	.word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall
 /*240*/	.word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler
 	.word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep
-/*250*/	.word sys32_mremap, sys32_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
+/*250*/	.word sys32_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl
 	.word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep
 /*260*/	.word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun
 	.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
@@ -83,7 +83,7 @@
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
-	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg
 
 #endif /* CONFIG_COMPAT */
 
@@ -158,4 +158,4 @@
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
+	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 614ac7b..5b2f595 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -210,9 +210,6 @@
 	btfixup();
 
 	sparc_init_timers(timer_interrupt);
-	
-	/* Now that OBP ticker has been silenced, it is safe to enable IRQ. */
-	local_irq_enable();
 }
 
 void __init time_init(void)
diff --git a/arch/sparc/kernel/trampoline_32.S b/arch/sparc/kernel/trampoline_32.S
index 5e235c5..691f484 100644
--- a/arch/sparc/kernel/trampoline_32.S
+++ b/arch/sparc/kernel/trampoline_32.S
@@ -15,7 +15,7 @@
 #include <asm/contregs.h>
 #include <asm/thread_info.h>
 
-	.globl sun4m_cpu_startup, __smp4m_processor_id
+	.globl sun4m_cpu_startup, __smp4m_processor_id, __leon_processor_id
 	.globl sun4d_cpu_startup, __smp4d_processor_id
 
 	__CPUINIT
@@ -106,6 +106,12 @@
 	retl
 	 mov	%g1, %o7
 
+__leon_processor_id:
+	rd     %asr17,%g2
+        srl    %g2,28,%g2
+	retl
+	 mov	%g1, %o7
+
 /* CPUID in bootbus can be found at PA 0xff0140000 */
 #define SUN4D_BOOTBUS_CPUID	0xf0140000
 
@@ -160,3 +166,64 @@
 	 nop
 
 	b,a	smp_do_cpu_idle
+
+#ifdef CONFIG_SPARC_LEON
+
+	__CPUINIT
+	.align	4
+        .global leon_smp_cpu_startup, smp_penguin_ctable
+
+leon_smp_cpu_startup:
+
+        set smp_penguin_ctable,%g1
+        ld [%g1+4],%g1
+        srl %g1,4,%g1
+        set 0x00000100,%g5 /* SRMMU_CTXTBL_PTR */
+	sta %g1, [%g5] ASI_M_MMUREGS
+
+	/* Set up a sane %psr -- PIL<0xf> S<0x1> PS<0x1> CWP<0x0> */
+	set	(PSR_PIL | PSR_S | PSR_PS), %g1
+	wr	%g1, 0x0, %psr		! traps off though
+	WRITE_PAUSE
+
+	/* Our %wim is one behind CWP */
+	mov	2, %g1
+	wr	%g1, 0x0, %wim
+	WRITE_PAUSE
+
+	/* Set tbr - we use just one trap table. */
+	set	trapbase, %g1
+	wr	%g1, 0x0, %tbr
+	WRITE_PAUSE
+
+	/* Get our CPU id */
+        rd     %asr17,%g3
+
+	/* Give ourselves a stack and curptr. */
+	set	current_set, %g5
+	srl	%g3, 28, %g4
+	sll	%g4, 2, %g4
+	ld	[%g5 + %g4], %g6
+
+	sethi	%hi(THREAD_SIZE - STACKFRAME_SZ), %sp
+	or	%sp, %lo(THREAD_SIZE - STACKFRAME_SZ), %sp
+	add	%g6, %sp, %sp
+
+	/* Turn on traps (PSR_ET). */
+	rd	%psr, %g1
+	wr	%g1, PSR_ET, %psr	! traps on
+	WRITE_PAUSE
+
+	/* Init our caches, etc. */
+	set	poke_srmmu, %g5
+	ld	[%g5], %g5
+	call	%g5
+	 nop
+
+	/* Start this processor. */
+	call	leon_callin
+	 nop
+
+	b,a	smp_do_cpu_idle
+
+#endif
diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h
index c2f772d..77d1b31 100644
--- a/arch/sparc/mm/init_64.h
+++ b/arch/sparc/mm/init_64.h
@@ -45,7 +45,7 @@
 #define VMEMMAP_ALIGN(x)	(((x)+VMEMMAP_CHUNK-1UL)&VMEMMAP_CHUNK_MASK)
 
 #define VMEMMAP_SIZE	((((1UL << MAX_PHYSADDR_BITS) >> PAGE_SHIFT) * \
-			  sizeof(struct page *)) >> VMEMMAP_CHUNK_SHIFT)
+			  sizeof(struct page)) >> VMEMMAP_CHUNK_SHIFT)
 extern unsigned long vmemmap_table[VMEMMAP_SIZE];
 #endif
 
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 509b1ff..367321a 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -1990,7 +1990,7 @@
 void __init init_leon(void)
 {
 
-	srmmu_name = "Leon";
+	srmmu_name = "LEON";
 
 	BTFIXUPSET_CALL(flush_cache_all, leon_flush_cache_all,
 			BTFIXUPCALL_NORM);
@@ -2037,8 +2037,6 @@
 
 	/* First, check for sparc-leon. */
 	if (sparc_cpu_model == sparc_leon) {
-		psr_typ = 0xf;	/* hardcoded ids for older models/simulators */
-		psr_vers = 2;
 		init_leon();
 		return;
 	}
@@ -2301,7 +2299,8 @@
 	BTFIXUPSET_CALL(flush_cache_mm, smp_flush_cache_mm, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(flush_cache_range, smp_flush_cache_range, BTFIXUPCALL_NORM);
 	BTFIXUPSET_CALL(flush_cache_page, smp_flush_cache_page, BTFIXUPCALL_NORM);
-	if (sparc_cpu_model != sun4d) {
+	if (sparc_cpu_model != sun4d &&
+	    sparc_cpu_model != sparc_leon) {
 		BTFIXUPSET_CALL(flush_tlb_all, smp_flush_tlb_all, BTFIXUPCALL_NORM);
 		BTFIXUPSET_CALL(flush_tlb_mm, smp_flush_tlb_mm, BTFIXUPCALL_NORM);
 		BTFIXUPSET_CALL(flush_tlb_range, smp_flush_tlb_range, BTFIXUPCALL_NORM);
@@ -2330,6 +2329,8 @@
 #ifdef CONFIG_SMP
 	if (sparc_cpu_model == sun4d)
 		sun4d_init_smp();
+	else if (sparc_cpu_model == sparc_leon)
+		leon_init_smp();
 	else
 		sun4m_init_smp();
 #endif
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 72ace95..32a1918 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -49,7 +49,9 @@
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_HW_BREAKPOINT
 	select HAVE_ARCH_KMEMCHECK
+	select HAVE_USER_RETURN_NOTIFIER
 
 config OUTPUT_FORMAT
 	string
@@ -1330,7 +1332,9 @@
 	  kernel, it won't hurt.
 
 config MTRR
-	bool "MTRR (Memory Type Range Register) support"
+	bool
+	default y
+	prompt "MTRR (Memory Type Range Register) support" if EMBEDDED
 	---help---
 	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
 	  the Memory Type Range Registers (MTRRs) may be used to control
@@ -1396,7 +1400,8 @@
 
 config X86_PAT
 	bool
-	prompt "x86 PAT support"
+	default y
+	prompt "x86 PAT support" if EMBEDDED
 	depends on MTRR
 	---help---
 	  Use PAT attributes to setup page level cache control.
@@ -1602,7 +1607,7 @@
 	depends on X86_32 || IA32_EMULATION
 	---help---
 	  Map the 32-bit VDSO to the predictable old-style address too.
-	---help---
+
 	  Say N here if you are running a sufficiently recent glibc
 	  version (2.3.3 or later), to remove the high-mapped
 	  VDSO mapping and to exclusively use the randomized VDSO.
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2649840..08e442b 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -301,15 +301,11 @@
 
 #
 # Define implied options from the CPU selection here
-config X86_L1_CACHE_BYTES
+config X86_INTERNODE_CACHE_SHIFT
 	int
-	default "128" if MPSC
-	default "64" if GENERIC_CPU || MK8 || MCORE2 || MATOM || X86_32
-
-config X86_INTERNODE_CACHE_BYTES
-	int
-	default "4096" if X86_VSMP
-	default X86_L1_CACHE_BYTES if !X86_VSMP
+	default "12" if X86_VSMP
+	default "7" if NUMA
+	default X86_L1_CACHE_SHIFT
 
 config X86_CMPXCHG
 	def_bool X86_64 || (X86_32 && !M386)
@@ -317,9 +313,9 @@
 config X86_L1_CACHE_SHIFT
 	int
 	default "7" if MPENTIUM4 || MPSC
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
 
 config X86_XADD
 	def_bool y
@@ -406,7 +402,7 @@
 # generates cmov.
 config X86_CMOV
 	def_bool y
-	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM)
+	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX)
 
 config X86_MINIMUM_CPU_FAMILY
 	int
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index d105f29..731318e 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -186,6 +186,15 @@
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 
+config X86_DECODER_SELFTEST
+     bool "x86 instruction decoder selftest"
+     depends on DEBUG_KERNEL
+	---help---
+	 Perform x86 instruction decoder selftests at build time.
+	 This option is useful for checking the sanity of x86 instruction
+	 decoder code.
+	 If unsure, say "N".
+
 #
 # IO delay types:
 #
@@ -287,4 +296,18 @@
 
 	  If unsure, say N.
 
+config DEBUG_STRICT_USER_COPY_CHECKS
+	bool "Strict copy size checks"
+	depends on DEBUG_KERNEL && !TRACE_BRANCH_PROFILING
+	---help---
+	  Enabling this option turns a certain set of sanity checks for user
+	  copy operations into compile time failures.
+
+	  The copy_from_user() etc checks are there to help test if there
+	  are sufficient security checks on the length argument of
+	  the copy operation, by having gcc prove that the argument is
+	  within bounds.
+
+	  If unsure, or if you run an older (pre 4.4) gcc, say N.
+
 endmenu
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index d2d24c9..78b32be 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -155,6 +155,9 @@
 KBUILD_IMAGE := $(boot)/bzImage
 
 bzImage: vmlinux
+ifeq ($(CONFIG_X86_DECODER_SELFTEST),y)
+	$(Q)$(MAKE) $(build)=arch/x86/tools posttest
+endif
 	$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
 	$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
 	$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 30e9a26..1255d95 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -41,11 +41,18 @@
 
 # Geode GX1 support
 cflags-$(CONFIG_MGEODEGX1)	+= -march=pentium-mmx
-
+cflags-$(CONFIG_MGEODE_LX)	+= $(call cc-option,-march=geode,-march=pentium-mmx)
 # add at the end to overwrite eventual tuning options from earlier
 # cpu entries
 cflags-$(CONFIG_X86_GENERIC) 	+= $(call tune,generic,$(call tune,i686))
 
+# Work around the pentium-mmx code generator madness of gcc4.4.x which
+# does stack alignment by generating horrible code _before_ the mcount
+# prologue (push %ebp, mov %esp, %ebp) which breaks the function graph
+# tracer assumptions. For i686, generic, core2 this is set by the
+# compiler anyway
+cflags-$(CONFIG_FUNCTION_GRAPH_TRACER) += $(call cc-option,-maccumulate-outgoing-args)
+
 # Bug fix for binutils: this option is required in order to keep
 # binutils from generating NOPL instructions against our will.
 ifneq ($(CONFIG_X86_P6_NOP),y)
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 077e1b6..faff0dc 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -107,8 +107,7 @@
 	lgdt	gdt(%ebp)
 
 	/* Enable PAE mode */
-	xorl	%eax, %eax
-	orl	$(X86_CR4_PAE), %eax
+	movl	$(X86_CR4_PAE), %eax
 	movl	%eax, %cr4
 
  /*
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index f4193bb..a6f1a59 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -4,6 +4,7 @@
 
 #undef i386
 
+#include <asm/cache.h>
 #include <asm/page_types.h>
 
 #ifdef CONFIG_X86_64
@@ -46,7 +47,7 @@
 		*(.data.*)
 		_edata = . ;
 	}
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.bss : {
 		_bss = . ;
 		*(.bss)
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index d42da38..f767164 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -27,6 +27,12 @@
 
 	boot_params.screen_info.orig_x = oreg.dl;
 	boot_params.screen_info.orig_y = oreg.dh;
+
+	if (oreg.ch & 0x20)
+		boot_params.screen_info.flags |= VIDEO_FLAGS_NOCURSOR;
+
+	if ((oreg.ch & 0x1f) > (oreg.cl & 0x1f))
+		boot_params.screen_info.flags |= VIDEO_FLAGS_NOCURSOR;
 }
 
 static void store_video_mode(void)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 581b056..4eefdca 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -653,7 +653,7 @@
 	.quad compat_sys_writev
 	.quad sys_getsid
 	.quad sys_fdatasync
-	.quad sys32_sysctl	/* sysctl */
+	.quad compat_sys_sysctl	/* sysctl */
 	.quad sys_mlock		/* 150 */
 	.quad sys_munlock
 	.quad sys_mlockall
@@ -841,4 +841,5 @@
 	.quad compat_sys_pwritev
 	.quad compat_sys_rt_tgsigqueueinfo	/* 335 */
 	.quad sys_perf_event_open
+	.quad compat_sys_recvmmsg
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 9f55271..df82c0e 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -434,62 +434,6 @@
 	return ret;
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct sysctl_ia32 {
-	unsigned int	name;
-	int		nlen;
-	unsigned int	oldval;
-	unsigned int	oldlenp;
-	unsigned int	newval;
-	unsigned int	newlen;
-	unsigned int	__unused[4];
-};
-
-
-asmlinkage long sys32_sysctl(struct sysctl_ia32 __user *args32)
-{
-	struct sysctl_ia32 a32;
-	mm_segment_t old_fs = get_fs();
-	void __user *oldvalp, *newvalp;
-	size_t oldlen;
-	int __user *namep;
-	long ret;
-
-	if (copy_from_user(&a32, args32, sizeof(a32)))
-		return -EFAULT;
-
-	/*
-	 * We need to pre-validate these because we have to disable
-	 * address checking before calling do_sysctl() because of
-	 * OLDLEN but we can't run the risk of the user specifying bad
-	 * addresses here.  Well, since we're dealing with 32 bit
-	 * addresses, we KNOW that access_ok() will always succeed, so
-	 * this is an expensive NOP, but so what...
-	 */
-	namep = compat_ptr(a32.name);
-	oldvalp = compat_ptr(a32.oldval);
-	newvalp =  compat_ptr(a32.newval);
-
-	if ((oldvalp && get_user(oldlen, (int __user *)compat_ptr(a32.oldlenp)))
-	    || !access_ok(VERIFY_WRITE, namep, 0)
-	    || !access_ok(VERIFY_WRITE, oldvalp, 0)
-	    || !access_ok(VERIFY_WRITE, newvalp, 0))
-		return -EFAULT;
-
-	set_fs(KERNEL_DS);
-	lock_kernel();
-	ret = do_sysctl(namep, a32.nlen, oldvalp, (size_t __user *)&oldlen,
-			newvalp, (size_t) a32.newlen);
-	unlock_kernel();
-	set_fs(old_fs);
-
-	if (oldvalp && put_user(oldlen, (int __user *)compat_ptr(a32.oldlenp)))
-		return -EFAULT;
-
-	return ret;
-}
-#endif
-
 /* warning: next two assume little endian */
 asmlinkage long sys32_pread(unsigned int fd, char __user *ubuf, u32 count,
 			    u32 poslo, u32 poshi)
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index 4a8e80c..9f828f8 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -10,6 +10,7 @@
 header-y += sigcontext32.h
 header-y += ucontext.h
 header-y += processor-flags.h
+header-y += hw_breakpoint.h
 
 unifdef-y += e820.h
 unifdef-y += ist.h
diff --git a/arch/x86/include/asm/a.out-core.h b/arch/x86/include/asm/a.out-core.h
index bb70e39..7a15588 100644
--- a/arch/x86/include/asm/a.out-core.h
+++ b/arch/x86/include/asm/a.out-core.h
@@ -17,6 +17,7 @@
 
 #include <linux/user.h>
 #include <linux/elfcore.h>
+#include <asm/debugreg.h>
 
 /*
  * fill in the user structure for an a.out core dump
@@ -32,14 +33,7 @@
 			>> PAGE_SHIFT;
 	dump->u_dsize -= dump->u_tsize;
 	dump->u_ssize = 0;
-	dump->u_debugreg[0] = current->thread.debugreg0;
-	dump->u_debugreg[1] = current->thread.debugreg1;
-	dump->u_debugreg[2] = current->thread.debugreg2;
-	dump->u_debugreg[3] = current->thread.debugreg3;
-	dump->u_debugreg[4] = 0;
-	dump->u_debugreg[5] = 0;
-	dump->u_debugreg[6] = current->thread.debugreg6;
-	dump->u_debugreg[7] = current->thread.debugreg7;
+	aout_dump_debugregs(dump);
 
 	if (dump->start_stack < TASK_SIZE)
 		dump->u_ssize = ((unsigned long)(TASK_SIZE - dump->start_stack))
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 4518dc5..60d2b2d 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -118,7 +118,7 @@
 extern unsigned long acpi_wakeup_address;
 
 /* early initialization routine */
-extern void acpi_reserve_bootmem(void);
+extern void acpi_reserve_wakeup_memory(void);
 
 /*
  * Check if the CPU can handle C2 and deeper
@@ -158,6 +158,7 @@
 
 #ifdef CONFIG_ACPI_NUMA
 extern int acpi_numa;
+extern int acpi_get_nodes(struct bootnode *physnodes);
 extern int acpi_scan_nodes(unsigned long start, unsigned long end);
 #define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
 extern void acpi_fake_nodes(const struct bootnode *fake_nodes,
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index e2077d3..b97f786 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -1,17 +1,13 @@
 #ifdef __ASSEMBLY__
 
-#ifdef CONFIG_X86_32
-# define X86_ALIGN .long
-#else
-# define X86_ALIGN .quad
-#endif
+#include <asm/asm.h>
 
 #ifdef CONFIG_SMP
 	.macro LOCK_PREFIX
 1:	lock
 	.section .smp_locks,"a"
-	.align 4
-	X86_ALIGN 1b
+	_ASM_ALIGN
+	_ASM_PTR 1b
 	.previous
 	.endm
 #else
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index c240efc..69b74a7 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -84,6 +84,7 @@
       "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
       "	 .byte 662b-661b\n"			/* sourcelen       */	\
       "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      "	 .byte 0xff + (664f-663f) - (662b-661b)\n" /* rlen <= slen */	\
       ".previous\n"							\
       ".section .altinstr_replacement, \"ax\"\n"			\
       "663:\n\t" newinstr "\n664:\n"		/* replacement     */	\
diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index 4b18089..5af2982 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -23,19 +23,13 @@
 #include <linux/irqreturn.h>
 
 #ifdef CONFIG_AMD_IOMMU
-extern int amd_iommu_init(void);
-extern int amd_iommu_init_dma_ops(void);
-extern int amd_iommu_init_passthrough(void);
+
 extern void amd_iommu_detect(void);
-extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
-extern void amd_iommu_flush_all_domains(void);
-extern void amd_iommu_flush_all_devices(void);
-extern void amd_iommu_shutdown(void);
-extern void amd_iommu_apply_erratum_63(u16 devid);
+
 #else
-static inline int amd_iommu_init(void) { return -ENODEV; }
+
 static inline void amd_iommu_detect(void) { }
-static inline void amd_iommu_shutdown(void) { }
+
 #endif
 
 #endif /* _ASM_X86_AMD_IOMMU_H */
diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
new file mode 100644
index 0000000..84786fb
--- /dev/null
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2009 Advanced Micro Devices, Inc.
+ * Author: Joerg Roedel <joerg.roedel@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_X86_AMD_IOMMU_PROTO_H
+#define _ASM_X86_AMD_IOMMU_PROTO_H
+
+struct amd_iommu;
+
+extern int amd_iommu_init_dma_ops(void);
+extern int amd_iommu_init_passthrough(void);
+extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+extern void amd_iommu_flush_all_domains(void);
+extern void amd_iommu_flush_all_devices(void);
+extern void amd_iommu_apply_erratum_63(u16 devid);
+extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
+
+#ifndef CONFIG_AMD_IOMMU_STATS
+
+static inline void amd_iommu_stats_init(void) { }
+
+#endif /* !CONFIG_AMD_IOMMU_STATS */
+
+#endif /* _ASM_X86_AMD_IOMMU_PROTO_H  */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 2a2cc7a..ba19ad4 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -25,6 +25,11 @@
 #include <linux/spinlock.h>
 
 /*
+ * Maximum number of IOMMUs supported
+ */
+#define MAX_IOMMUS	32
+
+/*
  * some size calculation constants
  */
 #define DEV_TABLE_ENTRY_SIZE		32
@@ -206,6 +211,9 @@
 			printk(KERN_INFO "AMD-Vi: " format, ## arg);	\
 	} while(0);
 
+/* global flag if IOMMUs cache non-present entries */
+extern bool amd_iommu_np_cache;
+
 /*
  * Make iterating over all IOMMUs easier
  */
@@ -226,6 +234,8 @@
  * independent of their use.
  */
 struct protection_domain {
+	struct list_head list;  /* for list of all protection domains */
+	struct list_head dev_list; /* List of all devices in this domain */
 	spinlock_t lock;	/* mostly used to lock the page table*/
 	u16 id;			/* the domain id written to the device table */
 	int mode;		/* paging mode (0-6 levels) */
@@ -233,7 +243,20 @@
 	unsigned long flags;	/* flags to find out type of domain */
 	bool updated;		/* complete domain flush required */
 	unsigned dev_cnt;	/* devices assigned to this domain */
+	unsigned dev_iommu[MAX_IOMMUS]; /* per-IOMMU reference count */
 	void *priv;		/* private data */
+
+};
+
+/*
+ * This struct contains device specific data for the IOMMU
+ */
+struct iommu_dev_data {
+	struct list_head list;		  /* For domain->dev_list */
+	struct device *dev;		  /* Device this data belong to */
+	struct device *alias;		  /* The Alias Device */
+	struct protection_domain *domain; /* Domain the device is bound to */
+	atomic_t bind;			  /* Domain attach reverent count */
 };
 
 /*
@@ -291,6 +314,9 @@
 struct amd_iommu {
 	struct list_head list;
 
+	/* Index within the IOMMU array */
+	int index;
+
 	/* locks the accesses to the hardware */
 	spinlock_t lock;
 
@@ -357,6 +383,21 @@
 extern struct list_head amd_iommu_list;
 
 /*
+ * Array with pointers to each IOMMU struct
+ * The indices are referenced in the protection domains
+ */
+extern struct amd_iommu *amd_iommus[MAX_IOMMUS];
+
+/* Number of IOMMUs present in the system */
+extern int amd_iommus_present;
+
+/*
+ * Declarations for the global list of all protection domains
+ */
+extern spinlock_t amd_iommu_pd_lock;
+extern struct list_head amd_iommu_pd_list;
+
+/*
  * Structure defining one entry in the device table
  */
 struct dev_table_entry {
@@ -416,15 +457,9 @@
 /* largest PCI device id we expect translation requests for */
 extern u16 amd_iommu_last_bdf;
 
-/* data structures for protection domain handling */
-extern struct protection_domain **amd_iommu_pd_table;
-
 /* allocation bitmap for domain ids */
 extern unsigned long *amd_iommu_pd_alloc_bitmap;
 
-/* will be 1 if device isolation is enabled */
-extern bool amd_iommu_isolate;
-
 /*
  * If true, the addresses will be flushed on unmap time, not when
  * they are reused
@@ -462,11 +497,6 @@
 #define ADD_STATS_COUNTER(name, x)
 #define SUB_STATS_COUNTER(name, x)
 
-static inline void amd_iommu_stats_init(void) { }
-
 #endif /* CONFIG_AMD_IOMMU_STATS */
 
-/* some function prototypes */
-extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
-
 #endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 474d80d..b4ac2cd 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -297,20 +297,20 @@
 	int disable_esr;
 
 	int dest_logical;
-	unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
+	unsigned long (*check_apicid_used)(physid_mask_t *map, int apicid);
 	unsigned long (*check_apicid_present)(int apicid);
 
 	void (*vector_allocation_domain)(int cpu, struct cpumask *retmask);
 	void (*init_apic_ldr)(void);
 
-	physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
+	void (*ioapic_phys_id_map)(physid_mask_t *phys_map, physid_mask_t *retmap);
 
 	void (*setup_apic_routing)(void);
 	int (*multi_timer_check)(int apic, int irq);
 	int (*apicid_to_node)(int logical_apicid);
 	int (*cpu_to_logical_apicid)(int cpu);
 	int (*cpu_present_to_apicid)(int mps_cpu);
-	physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
+	void (*apicid_to_cpu_present)(int phys_apicid, physid_mask_t *retmap);
 	void (*setup_portio_remap)(void);
 	int (*check_phys_apicid_present)(int phys_apicid);
 	void (*enable_apic_mode)(void);
@@ -488,6 +488,8 @@
 
 extern void default_setup_apic_routing(void);
 
+extern struct apic apic_noop;
+
 #ifdef CONFIG_X86_32
 
 extern struct apic apic_default;
@@ -532,9 +534,9 @@
 	return (unsigned int)(mask1 & mask2 & mask3);
 }
 
-static inline unsigned long default_check_apicid_used(physid_mask_t bitmap, int apicid)
+static inline unsigned long default_check_apicid_used(physid_mask_t *map, int apicid)
 {
-	return physid_isset(apicid, bitmap);
+	return physid_isset(apicid, *map);
 }
 
 static inline unsigned long default_check_apicid_present(int bit)
@@ -542,9 +544,9 @@
 	return physid_isset(bit, phys_cpu_present_map);
 }
 
-static inline physid_mask_t default_ioapic_phys_id_map(physid_mask_t phys_map)
+static inline void default_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
-	return phys_map;
+	*retmap = *phys_map;
 }
 
 /* Mapping from cpu number to logical apicid */
@@ -583,11 +585,6 @@
 extern int default_check_phys_apicid_present(int phys_apicid);
 #endif
 
-static inline physid_mask_t default_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 3b62da9..7fe3b30 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -11,6 +11,12 @@
 #define IO_APIC_DEFAULT_PHYS_BASE	0xfec00000
 #define	APIC_DEFAULT_PHYS_BASE		0xfee00000
 
+/*
+ * This is the IO-APIC register space as specified
+ * by Intel docs:
+ */
+#define IO_APIC_SLOT_SIZE		1024
+
 #define	APIC_ID		0x20
 
 #define	APIC_LVR	0x30
diff --git a/arch/x86/include/asm/apicnum.h b/arch/x86/include/asm/apicnum.h
deleted file mode 100644
index 82f613c..0000000
--- a/arch/x86/include/asm/apicnum.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_X86_APICNUM_H
-#define _ASM_X86_APICNUM_H
-
-/* define MAX_IO_APICS */
-#ifdef CONFIG_X86_32
-# define MAX_IO_APICS 64
-#else
-# define MAX_IO_APICS 128
-# define MAX_LOCAL_APIC 32768
-#endif
-
-#endif /* _ASM_X86_APICNUM_H */
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
index d9cf1cd..f654d1b 100644
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -22,14 +22,14 @@
 		     ".popsection"				\
 		     : : "i" (__FILE__), "i" (__LINE__),	\
 		     "i" (sizeof(struct bug_entry)));		\
-	for (;;) ;						\
+	unreachable();						\
 } while (0)
 
 #else
 #define BUG()							\
 do {								\
 	asm volatile("ud2");					\
-	for (;;) ;						\
+	unreachable();						\
 } while (0)
 #endif
 
diff --git a/arch/x86/include/asm/cache.h b/arch/x86/include/asm/cache.h
index 549860d..2f9047c 100644
--- a/arch/x86/include/asm/cache.h
+++ b/arch/x86/include/asm/cache.h
@@ -9,12 +9,13 @@
 
 #define __read_mostly __attribute__((__section__(".data.read_mostly")))
 
+#define INTERNODE_CACHE_SHIFT CONFIG_X86_INTERNODE_CACHE_SHIFT
+#define INTERNODE_CACHE_BYTES (1 << INTERNODE_CACHE_SHIFT)
+
 #ifdef CONFIG_X86_VSMP
-/* vSMP Internode cacheline shift */
-#define INTERNODE_CACHE_SHIFT (12)
 #ifdef CONFIG_SMP
 #define __cacheline_aligned_in_smp					\
-	__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT))))	\
+	__attribute__((__aligned__(INTERNODE_CACHE_BYTES)))		\
 	__page_aligned_data
 #endif
 #endif
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index b54f6af..634c40a 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -12,6 +12,7 @@
 				     unsigned long start, unsigned long end) { }
 static inline void flush_cache_page(struct vm_area_struct *vma,
 				    unsigned long vmaddr, unsigned long pfn) { }
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 static inline void flush_dcache_page(struct page *page) { }
 static inline void flush_dcache_mmap_lock(struct address_space *mapping) { }
 static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { }
@@ -176,6 +177,7 @@
 #ifdef CONFIG_DEBUG_RODATA
 void mark_rodata_ro(void);
 extern const int rodata_test_data;
+extern int kernel_set_to_readonly;
 void set_kernel_text_rw(void);
 void set_kernel_text_ro(void);
 #else
diff --git a/arch/x86/include/asm/calgary.h b/arch/x86/include/asm/calgary.h
index b03bedb..0918654 100644
--- a/arch/x86/include/asm/calgary.h
+++ b/arch/x86/include/asm/calgary.h
@@ -62,10 +62,8 @@
 extern int use_calgary;
 
 #ifdef CONFIG_CALGARY_IOMMU
-extern int calgary_iommu_init(void);
 extern void detect_calgary(void);
 #else
-static inline int calgary_iommu_init(void) { return 1; }
 static inline void detect_calgary(void) { return; }
 #endif
 
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index ee1931b..ffb9bb6 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -8,14 +8,50 @@
  *       you need to test for the feature in boot_cpu_data.
  */
 
-#define xchg(ptr, v)							\
-	((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), sizeof(*(ptr))))
+extern void __xchg_wrong_size(void);
+
+/*
+ * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
+ * Note 2: xchg has side effect, so that attribute volatile is necessary,
+ *	  but generally the primitive is invalid, *ptr is output argument. --ANK
+ */
 
 struct __xchg_dummy {
 	unsigned long a[100];
 };
 #define __xg(x) ((struct __xchg_dummy *)(x))
 
+#define __xchg(x, ptr, size)						\
+({									\
+	__typeof(*(ptr)) __x = (x);					\
+	switch (size) {							\
+	case 1:								\
+		asm volatile("xchgb %b0,%1"				\
+			     : "=q" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile("xchgw %w0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile("xchgl %0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__xchg_wrong_size();					\
+	}								\
+	__x;								\
+})
+
+#define xchg(ptr, v)							\
+	__xchg((v), (ptr), sizeof(*ptr))
+
 /*
  * The semantics of XCHGCMP8B are a bit strange, this is why
  * there is a loop and the loading of %%eax and %%edx has to
@@ -71,57 +107,63 @@
 		       (unsigned int)((value) >> 32))			\
 	 : __set_64bit(ptr, ll_low((value)), ll_high((value))))
 
-/*
- * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
- * Note 2: xchg has side effect, so that attribute volatile is necessary,
- *	  but generally the primitive is invalid, *ptr is output argument. --ANK
- */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	switch (size) {
-	case 1:
-		asm volatile("xchgb %b0,%1"
-			     : "=q" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 2:
-		asm volatile("xchgw %w0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 4:
-		asm volatile("xchgl %0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	}
-	return x;
-}
+extern void __cmpxchg_wrong_size(void);
 
 /*
  * Atomic compare and exchange.  Compare OLD with MEM, if identical,
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  */
+#define __raw_cmpxchg(ptr, old, new, size, lock)			\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__typeof__(*(ptr)) __old = (old);				\
+	__typeof__(*(ptr)) __new = (new);				\
+	switch (size) {							\
+	case 1:								\
+		asm volatile(lock "cmpxchgb %b1,%2"			\
+			     : "=a"(__ret)				\
+			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile(lock "cmpxchgw %w1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile(lock "cmpxchgl %1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__cmpxchg_wrong_size();					\
+	}								\
+	__ret;								\
+})
+
+#define __cmpxchg(ptr, old, new, size)					\
+	__raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
+
+#define __sync_cmpxchg(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
+
+#define __cmpxchg_local(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "")
 
 #ifdef CONFIG_X86_CMPXCHG
 #define __HAVE_ARCH_CMPXCHG 1
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-				       (unsigned long)(n),		\
-				       sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
-					    (unsigned long)(n),		\
-					    sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-					     (unsigned long)(n),	\
-					     sizeof(*(ptr))))
+
+#define cmpxchg(ptr, old, new)						\
+	__cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define sync_cmpxchg(ptr, old, new)					\
+	__sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define cmpxchg_local(ptr, old, new)					\
+	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
 #endif
 
 #ifdef CONFIG_X86_CMPXCHG64
@@ -133,94 +175,6 @@
 					       (unsigned long long)(n)))
 #endif
 
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile(LOCK_PREFIX "cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-/*
- * Always use locked operations when touching memory shared with a
- * hypervisor, since the system may be SMP even if the guest kernel
- * isn't.
- */
-static inline unsigned long __sync_cmpxchg(volatile void *ptr,
-					   unsigned long old,
-					   unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("lock; cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("lock; cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("lock; cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
-
 static inline unsigned long long __cmpxchg64(volatile void *ptr,
 					     unsigned long long old,
 					     unsigned long long new)
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 52de72e..485ae41 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -3,9 +3,6 @@
 
 #include <asm/alternative.h> /* Provides LOCK_PREFIX */
 
-#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), \
-						 (ptr), sizeof(*(ptr))))
-
 #define __xg(x) ((volatile long *)(x))
 
 static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
@@ -15,167 +12,118 @@
 
 #define _set_64bit set_64bit
 
+extern void __xchg_wrong_size(void);
+extern void __cmpxchg_wrong_size(void);
+
 /*
  * Note: no "lock" prefix even on SMP: xchg always implies lock anyway
  * Note 2: xchg has side effect, so that attribute volatile is necessary,
  *	  but generally the primitive is invalid, *ptr is output argument. --ANK
  */
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-				   int size)
-{
-	switch (size) {
-	case 1:
-		asm volatile("xchgb %b0,%1"
-			     : "=q" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 2:
-		asm volatile("xchgw %w0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 4:
-		asm volatile("xchgl %k0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	case 8:
-		asm volatile("xchgq %0,%1"
-			     : "=r" (x)
-			     : "m" (*__xg(ptr)), "0" (x)
-			     : "memory");
-		break;
-	}
-	return x;
-}
+#define __xchg(x, ptr, size)						\
+({									\
+	__typeof(*(ptr)) __x = (x);					\
+	switch (size) {							\
+	case 1:								\
+		asm volatile("xchgb %b0,%1"				\
+			     : "=q" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile("xchgw %w0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile("xchgl %k0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	case 8:								\
+		asm volatile("xchgq %0,%1"				\
+			     : "=r" (__x)				\
+			     : "m" (*__xg(ptr)), "0" (__x)		\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__xchg_wrong_size();					\
+	}								\
+	__x;								\
+})
+
+#define xchg(ptr, v)							\
+	__xchg((v), (ptr), sizeof(*ptr))
+
+#define __HAVE_ARCH_CMPXCHG 1
 
 /*
  * Atomic compare and exchange.  Compare OLD with MEM, if identical,
  * store NEW in MEM.  Return the initial value in MEM.  Success is
  * indicated by comparing RETURN with OLD.
  */
+#define __raw_cmpxchg(ptr, old, new, size, lock)			\
+({									\
+	__typeof__(*(ptr)) __ret;					\
+	__typeof__(*(ptr)) __old = (old);				\
+	__typeof__(*(ptr)) __new = (new);				\
+	switch (size) {							\
+	case 1:								\
+		asm volatile(lock "cmpxchgb %b1,%2"			\
+			     : "=a"(__ret)				\
+			     : "q"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 2:								\
+		asm volatile(lock "cmpxchgw %w1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 4:								\
+		asm volatile(lock "cmpxchgl %k1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	case 8:								\
+		asm volatile(lock "cmpxchgq %1,%2"			\
+			     : "=a"(__ret)				\
+			     : "r"(__new), "m"(*__xg(ptr)), "0"(__old)	\
+			     : "memory");				\
+		break;							\
+	default:							\
+		__cmpxchg_wrong_size();					\
+	}								\
+	__ret;								\
+})
 
-#define __HAVE_ARCH_CMPXCHG 1
+#define __cmpxchg(ptr, old, new, size)					\
+	__raw_cmpxchg((ptr), (old), (new), (size), LOCK_PREFIX)
 
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile(LOCK_PREFIX "cmpxchgl %k1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 8:
-		asm volatile(LOCK_PREFIX "cmpxchgq %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
+#define __sync_cmpxchg(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "lock; ")
 
-/*
- * Always use locked operations when touching memory shared with a
- * hypervisor, since the system may be SMP even if the guest kernel
- * isn't.
- */
-static inline unsigned long __sync_cmpxchg(volatile void *ptr,
-					   unsigned long old,
-					   unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("lock; cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("lock; cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("lock; cmpxchgl %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
+#define __cmpxchg_local(ptr, old, new, size)				\
+	__raw_cmpxchg((ptr), (old), (new), (size), "")
 
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
-					    unsigned long old,
-					    unsigned long new, int size)
-{
-	unsigned long prev;
-	switch (size) {
-	case 1:
-		asm volatile("cmpxchgb %b1,%2"
-			     : "=a"(prev)
-			     : "q"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 2:
-		asm volatile("cmpxchgw %w1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 4:
-		asm volatile("cmpxchgl %k1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	case 8:
-		asm volatile("cmpxchgq %1,%2"
-			     : "=a"(prev)
-			     : "r"(new), "m"(*__xg(ptr)), "0"(old)
-			     : "memory");
-		return prev;
-	}
-	return old;
-}
+#define cmpxchg(ptr, old, new)						\
+	__cmpxchg((ptr), (old), (new), sizeof(*ptr))
 
-#define cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
-				       (unsigned long)(n), sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, old, new)					\
+	__sync_cmpxchg((ptr), (old), (new), sizeof(*ptr))
+
+#define cmpxchg_local(ptr, old, new)					\
+	__cmpxchg_local((ptr), (old), (new), sizeof(*ptr))
+
 #define cmpxchg64(ptr, o, n)						\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
 	cmpxchg((ptr), (o), (n));					\
 })
-#define cmpxchg_local(ptr, o, n)					\
-	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
-					     (unsigned long)(n),	\
-					     sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n)						\
-	((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o),	\
-					    (unsigned long)(n),		\
-					    sizeof(*(ptr))))
+
 #define cmpxchg64_local(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
index 3ea6f37..8240f76 100644
--- a/arch/x86/include/asm/debugreg.h
+++ b/arch/x86/include/asm/debugreg.h
@@ -18,6 +18,7 @@
 #define DR_TRAP1	(0x2)		/* db1 */
 #define DR_TRAP2	(0x4)		/* db2 */
 #define DR_TRAP3	(0x8)		/* db3 */
+#define DR_TRAP_BITS	(DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)
 
 #define DR_STEP		(0x4000)	/* single-step */
 #define DR_SWITCH	(0x8000)	/* task switch */
@@ -49,6 +50,8 @@
 
 #define DR_LOCAL_ENABLE_SHIFT 0    /* Extra shift to the local enable bit */
 #define DR_GLOBAL_ENABLE_SHIFT 1   /* Extra shift to the global enable bit */
+#define DR_LOCAL_ENABLE (0x1)      /* Local enable for reg 0 */
+#define DR_GLOBAL_ENABLE (0x2)     /* Global enable for reg 0 */
 #define DR_ENABLE_SIZE 2           /* 2 enable bits per register */
 
 #define DR_LOCAL_ENABLE_MASK (0x55)  /* Set  local bits for all 4 regs */
@@ -67,4 +70,34 @@
 #define DR_LOCAL_SLOWDOWN (0x100)   /* Local slow the pipeline */
 #define DR_GLOBAL_SLOWDOWN (0x200)  /* Global slow the pipeline */
 
+/*
+ * HW breakpoint additions
+ */
+#ifdef __KERNEL__
+
+DECLARE_PER_CPU(unsigned long, cpu_dr7);
+
+static inline void hw_breakpoint_disable(void)
+{
+	/* Zero the control register for HW Breakpoint */
+	set_debugreg(0UL, 7);
+
+	/* Zero-out the individual HW breakpoint address registers */
+	set_debugreg(0UL, 0);
+	set_debugreg(0UL, 1);
+	set_debugreg(0UL, 2);
+	set_debugreg(0UL, 3);
+}
+
+static inline int hw_breakpoint_active(void)
+{
+	return __get_cpu_var(cpu_dr7) & DR_GLOBAL_ENABLE_MASK;
+}
+
+extern void aout_dump_debugregs(struct user *dump);
+
+extern void hw_breakpoint_restore(void);
+
+#endif	/* __KERNEL__ */
+
 #endif /* _ASM_X86_DEBUGREG_H */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index cee34e9..029f230 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -8,7 +8,7 @@
 #ifdef CONFIG_X86_64
 struct dma_map_ops *dma_ops;
 #endif
-#ifdef CONFIG_DMAR
+#if defined(CONFIG_DMAR) || defined(CONFIG_AMD_IOMMU)
 	void *iommu; /* hook for IOMMU specific extension */
 #endif
 };
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 6a25d5d..0f6c02f 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -20,7 +20,8 @@
 # define ISA_DMA_BIT_MASK DMA_BIT_MASK(32)
 #endif
 
-extern dma_addr_t bad_dma_address;
+#define DMA_ERROR_CODE	0
+
 extern int iommu_merge;
 extern struct device x86_dma_fallback_dev;
 extern int panic_on_overflow;
@@ -48,7 +49,7 @@
 	if (ops->mapping_error)
 		return ops->mapping_error(dev, dma_addr);
 
-	return (dma_addr == bad_dma_address);
+	return (dma_addr == DMA_ERROR_CODE);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 40b4e61..761249e 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -61,6 +61,12 @@
 	struct e820entry map[E820_X_MAX];
 };
 
+#define ISA_START_ADDRESS	0xa0000
+#define ISA_END_ADDRESS		0x100000
+
+#define BIOS_BEGIN		0x000a0000
+#define BIOS_END		0x00100000
+
 #ifdef __KERNEL__
 /* see comment in arch/x86/kernel/e820.c */
 extern struct e820map e820;
@@ -126,16 +132,19 @@
 extern void e820_reserve_resources_late(void);
 extern void setup_memory_map(void);
 extern char *default_machine_specific_memory_setup(void);
+
+/*
+ * Returns true iff the specified range [s,e) is completely contained inside
+ * the ISA region.
+ */
+static inline bool is_ISA_range(u64 s, u64 e)
+{
+	return s >= ISA_START_ADDRESS && e <= ISA_END_ADDRESS;
+}
+
 #endif /* __KERNEL__ */
 #endif /* __ASSEMBLY__ */
 
-#define ISA_START_ADDRESS	0xa0000
-#define ISA_END_ADDRESS		0x100000
-#define is_ISA_range(s, e) ((s) >= ISA_START_ADDRESS && (e) < ISA_END_ADDRESS)
-
-#define BIOS_BEGIN		0x000a0000
-#define BIOS_END		0x00100000
-
 #ifdef __KERNEL__
 #include <linux/ioport.h>
 
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 456a304..8a024ba 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -157,19 +157,6 @@
 
 #define compat_elf_check_arch(x)	elf_check_arch_ia32(x)
 
-static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
-{
-	loadsegment(fs, 0);
-	loadsegment(ds, __USER32_DS);
-	loadsegment(es, __USER32_DS);
-	load_gs_index(0);
-	regs->ip = ip;
-	regs->sp = sp;
-	regs->flags = X86_EFLAGS_IF;
-	regs->cs = __USER32_CS;
-	regs->ss = __USER32_DS;
-}
-
 static inline void elf_common_init(struct thread_struct *t,
 				   struct pt_regs *regs, const u16 ds)
 {
@@ -191,11 +178,8 @@
 #define	COMPAT_ELF_PLAT_INIT(regs, load_addr)		\
 	elf_common_init(&current->thread, regs, __USER_DS)
 
-#define	compat_start_thread(regs, ip, sp)		\
-do {							\
-	start_ia32_thread(regs, ip, sp);		\
-	set_fs(USER_DS);				\
-} while (0)
+void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp);
+#define compat_start_thread start_thread_ia32
 
 #define COMPAT_SET_PERSONALITY(ex)			\
 do {							\
diff --git a/arch/x86/include/asm/entry_arch.h b/arch/x86/include/asm/entry_arch.h
index f5693c8..8e8ec66 100644
--- a/arch/x86/include/asm/entry_arch.h
+++ b/arch/x86/include/asm/entry_arch.h
@@ -34,7 +34,7 @@
 		 smp_invalidate_interrupt)
 #endif
 
-BUILD_INTERRUPT(generic_interrupt, GENERIC_INTERRUPT_VECTOR)
+BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)
 
 /*
  * every pentium local APIC has two 'local interrupts', with a
diff --git a/arch/x86/include/asm/gart.h b/arch/x86/include/asm/gart.h
index 6cfdafa..4ac5b0f 100644
--- a/arch/x86/include/asm/gart.h
+++ b/arch/x86/include/asm/gart.h
@@ -35,8 +35,7 @@
 extern int gart_iommu_aperture_disabled;
 
 extern void early_gart_iommu_check(void);
-extern void gart_iommu_init(void);
-extern void gart_iommu_shutdown(void);
+extern int gart_iommu_init(void);
 extern void __init gart_parse_options(char *);
 extern void gart_iommu_hole_init(void);
 
@@ -48,12 +47,6 @@
 static inline void early_gart_iommu_check(void)
 {
 }
-static inline void gart_iommu_init(void)
-{
-}
-static inline void gart_iommu_shutdown(void)
-{
-}
 static inline void gart_parse_options(char *options)
 {
 }
diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 82e3e8f..0f85764 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -12,7 +12,7 @@
 	unsigned int apic_timer_irqs;	/* arch dependent */
 	unsigned int irq_spurious_count;
 #endif
-	unsigned int generic_irqs;	/* arch dependent */
+	unsigned int x86_platform_ipis;	/* arch dependent */
 	unsigned int apic_perf_irqs;
 	unsigned int apic_pending_irqs;
 #ifdef CONFIG_SMP
@@ -20,11 +20,11 @@
 	unsigned int irq_call_count;
 	unsigned int irq_tlb_count;
 #endif
-#ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	unsigned int irq_thermal_count;
-# ifdef CONFIG_X86_MCE_THRESHOLD
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	unsigned int irq_threshold_count;
-# endif
 #endif
 } ____cacheline_aligned irq_cpustat_t;
 
diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
new file mode 100644
index 0000000..0675a7c
--- /dev/null
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -0,0 +1,73 @@
+#ifndef	_I386_HW_BREAKPOINT_H
+#define	_I386_HW_BREAKPOINT_H
+
+#ifdef	__KERNEL__
+#define	__ARCH_HW_BREAKPOINT_H
+
+/*
+ * The name should probably be something dealt in
+ * a higher level. While dealing with the user
+ * (display/resolving)
+ */
+struct arch_hw_breakpoint {
+	char		*name; /* Contains name of the symbol to set bkpt */
+	unsigned long	address;
+	u8		len;
+	u8		type;
+};
+
+#include <linux/kdebug.h>
+#include <linux/percpu.h>
+#include <linux/list.h>
+
+/* Available HW breakpoint length encodings */
+#define X86_BREAKPOINT_LEN_1		0x40
+#define X86_BREAKPOINT_LEN_2		0x44
+#define X86_BREAKPOINT_LEN_4		0x4c
+#define X86_BREAKPOINT_LEN_EXECUTE	0x40
+
+#ifdef CONFIG_X86_64
+#define X86_BREAKPOINT_LEN_8		0x48
+#endif
+
+/* Available HW breakpoint type encodings */
+
+/* trigger on instruction execute */
+#define X86_BREAKPOINT_EXECUTE	0x80
+/* trigger on memory write */
+#define X86_BREAKPOINT_WRITE	0x81
+/* trigger on memory read or write */
+#define X86_BREAKPOINT_RW	0x83
+
+/* Total number of available HW breakpoint registers */
+#define HBP_NUM 4
+
+struct perf_event;
+struct pmu;
+
+extern int arch_check_va_in_userspace(unsigned long va, u8 hbp_len);
+extern int arch_validate_hwbkpt_settings(struct perf_event *bp,
+					 struct task_struct *tsk);
+extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+					   unsigned long val, void *data);
+
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp);
+
+extern void
+arch_fill_perf_breakpoint(struct perf_event *bp);
+
+unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type);
+int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type);
+
+extern int arch_bp_generic_fields(int x86_len, int x86_type,
+				  int *gen_len, int *gen_type);
+
+extern struct pmu perf_ops_bp;
+
+#endif	/* __KERNEL__ */
+#endif	/* _I386_HW_BREAKPOINT_H */
+
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index ba180d9..08c48a8 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -27,7 +27,7 @@
 
 /* Interrupt handlers registered during init_IRQ */
 extern void apic_timer_interrupt(void);
-extern void generic_interrupt(void);
+extern void x86_platform_ipi(void);
 extern void error_interrupt(void);
 extern void perf_pending_interrupt(void);
 
@@ -79,14 +79,32 @@
 					int ioapic, int ioapic_pin,
 					int trigger, int polarity)
 {
-	irq_attr->ioapic     = ioapic;
-	irq_attr->ioapic_pin = ioapic_pin;
-	irq_attr->trigger    = trigger;
-	irq_attr->polarity   = polarity;
+	irq_attr->ioapic	= ioapic;
+	irq_attr->ioapic_pin	= ioapic_pin;
+	irq_attr->trigger	= trigger;
+	irq_attr->polarity	= polarity;
 }
 
-extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
-					struct io_apic_irq_attr *irq_attr);
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
+struct irq_cfg {
+	struct irq_pin_list	*irq_2_pin;
+	cpumask_var_t		domain;
+	cpumask_var_t		old_domain;
+	u8			vector;
+	u8			move_in_progress : 1;
+};
+
+extern struct irq_cfg *irq_cfg(unsigned int);
+extern int assign_irq_vector(int, struct irq_cfg *, const struct cpumask *);
+extern void send_cleanup_vector(struct irq_cfg *);
+
+struct irq_desc;
+extern unsigned int set_desc_affinity(struct irq_desc *, const struct cpumask *);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin, struct io_apic_irq_attr *irq_attr);
 extern void setup_ioapic_dest(void);
 
 extern void enable_IO_APIC(void);
@@ -101,7 +119,7 @@
 /* SMP */
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
-extern void smp_generic_interrupt(struct pt_regs *);
+extern void smp_x86_platform_ipi(struct pt_regs *);
 extern void smp_error_interrupt(struct pt_regs *);
 #ifdef CONFIG_X86_IO_APIC
 extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
diff --git a/arch/x86/include/asm/inat.h b/arch/x86/include/asm/inat.h
new file mode 100644
index 0000000..205b063
--- /dev/null
+++ b/arch/x86/include/asm/inat.h
@@ -0,0 +1,220 @@
+#ifndef _ASM_X86_INAT_H
+#define _ASM_X86_INAT_H
+/*
+ * x86 instruction attributes
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <asm/inat_types.h>
+
+/*
+ * Internal bits. Don't use bitmasks directly, because these bits are
+ * unstable. You should use checking functions.
+ */
+
+#define INAT_OPCODE_TABLE_SIZE 256
+#define INAT_GROUP_TABLE_SIZE 8
+
+/* Legacy last prefixes */
+#define INAT_PFX_OPNDSZ	1	/* 0x66 */ /* LPFX1 */
+#define INAT_PFX_REPE	2	/* 0xF3 */ /* LPFX2 */
+#define INAT_PFX_REPNE	3	/* 0xF2 */ /* LPFX3 */
+/* Other Legacy prefixes */
+#define INAT_PFX_LOCK	4	/* 0xF0 */
+#define INAT_PFX_CS	5	/* 0x2E */
+#define INAT_PFX_DS	6	/* 0x3E */
+#define INAT_PFX_ES	7	/* 0x26 */
+#define INAT_PFX_FS	8	/* 0x64 */
+#define INAT_PFX_GS	9	/* 0x65 */
+#define INAT_PFX_SS	10	/* 0x36 */
+#define INAT_PFX_ADDRSZ	11	/* 0x67 */
+/* x86-64 REX prefix */
+#define INAT_PFX_REX	12	/* 0x4X */
+/* AVX VEX prefixes */
+#define INAT_PFX_VEX2	13	/* 2-bytes VEX prefix */
+#define INAT_PFX_VEX3	14	/* 3-bytes VEX prefix */
+
+#define INAT_LSTPFX_MAX	3
+#define INAT_LGCPFX_MAX	11
+
+/* Immediate size */
+#define INAT_IMM_BYTE		1
+#define INAT_IMM_WORD		2
+#define INAT_IMM_DWORD		3
+#define INAT_IMM_QWORD		4
+#define INAT_IMM_PTR		5
+#define INAT_IMM_VWORD32	6
+#define INAT_IMM_VWORD		7
+
+/* Legacy prefix */
+#define INAT_PFX_OFFS	0
+#define INAT_PFX_BITS	4
+#define INAT_PFX_MAX    ((1 << INAT_PFX_BITS) - 1)
+#define INAT_PFX_MASK	(INAT_PFX_MAX << INAT_PFX_OFFS)
+/* Escape opcodes */
+#define INAT_ESC_OFFS	(INAT_PFX_OFFS + INAT_PFX_BITS)
+#define INAT_ESC_BITS	2
+#define INAT_ESC_MAX	((1 << INAT_ESC_BITS) - 1)
+#define INAT_ESC_MASK	(INAT_ESC_MAX << INAT_ESC_OFFS)
+/* Group opcodes (1-16) */
+#define INAT_GRP_OFFS	(INAT_ESC_OFFS + INAT_ESC_BITS)
+#define INAT_GRP_BITS	5
+#define INAT_GRP_MAX	((1 << INAT_GRP_BITS) - 1)
+#define INAT_GRP_MASK	(INAT_GRP_MAX << INAT_GRP_OFFS)
+/* Immediates */
+#define INAT_IMM_OFFS	(INAT_GRP_OFFS + INAT_GRP_BITS)
+#define INAT_IMM_BITS	3
+#define INAT_IMM_MASK	(((1 << INAT_IMM_BITS) - 1) << INAT_IMM_OFFS)
+/* Flags */
+#define INAT_FLAG_OFFS	(INAT_IMM_OFFS + INAT_IMM_BITS)
+#define INAT_MODRM	(1 << (INAT_FLAG_OFFS))
+#define INAT_FORCE64	(1 << (INAT_FLAG_OFFS + 1))
+#define INAT_SCNDIMM	(1 << (INAT_FLAG_OFFS + 2))
+#define INAT_MOFFSET	(1 << (INAT_FLAG_OFFS + 3))
+#define INAT_VARIANT	(1 << (INAT_FLAG_OFFS + 4))
+#define INAT_VEXOK	(1 << (INAT_FLAG_OFFS + 5))
+#define INAT_VEXONLY	(1 << (INAT_FLAG_OFFS + 6))
+/* Attribute making macros for attribute tables */
+#define INAT_MAKE_PREFIX(pfx)	(pfx << INAT_PFX_OFFS)
+#define INAT_MAKE_ESCAPE(esc)	(esc << INAT_ESC_OFFS)
+#define INAT_MAKE_GROUP(grp)	((grp << INAT_GRP_OFFS) | INAT_MODRM)
+#define INAT_MAKE_IMM(imm)	(imm << INAT_IMM_OFFS)
+
+/* Attribute search APIs */
+extern insn_attr_t inat_get_opcode_attribute(insn_byte_t opcode);
+extern insn_attr_t inat_get_escape_attribute(insn_byte_t opcode,
+					     insn_byte_t last_pfx,
+					     insn_attr_t esc_attr);
+extern insn_attr_t inat_get_group_attribute(insn_byte_t modrm,
+					    insn_byte_t last_pfx,
+					    insn_attr_t esc_attr);
+extern insn_attr_t inat_get_avx_attribute(insn_byte_t opcode,
+					  insn_byte_t vex_m,
+					  insn_byte_t vex_pp);
+
+/* Attribute checking functions */
+static inline int inat_is_legacy_prefix(insn_attr_t attr)
+{
+	attr &= INAT_PFX_MASK;
+	return attr && attr <= INAT_LGCPFX_MAX;
+}
+
+static inline int inat_is_address_size_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_ADDRSZ;
+}
+
+static inline int inat_is_operand_size_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_OPNDSZ;
+}
+
+static inline int inat_is_rex_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_REX;
+}
+
+static inline int inat_last_prefix_id(insn_attr_t attr)
+{
+	if ((attr & INAT_PFX_MASK) > INAT_LSTPFX_MAX)
+		return 0;
+	else
+		return attr & INAT_PFX_MASK;
+}
+
+static inline int inat_is_vex_prefix(insn_attr_t attr)
+{
+	attr &= INAT_PFX_MASK;
+	return attr == INAT_PFX_VEX2 || attr == INAT_PFX_VEX3;
+}
+
+static inline int inat_is_vex3_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_VEX3;
+}
+
+static inline int inat_is_escape(insn_attr_t attr)
+{
+	return attr & INAT_ESC_MASK;
+}
+
+static inline int inat_escape_id(insn_attr_t attr)
+{
+	return (attr & INAT_ESC_MASK) >> INAT_ESC_OFFS;
+}
+
+static inline int inat_is_group(insn_attr_t attr)
+{
+	return attr & INAT_GRP_MASK;
+}
+
+static inline int inat_group_id(insn_attr_t attr)
+{
+	return (attr & INAT_GRP_MASK) >> INAT_GRP_OFFS;
+}
+
+static inline int inat_group_common_attribute(insn_attr_t attr)
+{
+	return attr & ~INAT_GRP_MASK;
+}
+
+static inline int inat_has_immediate(insn_attr_t attr)
+{
+	return attr & INAT_IMM_MASK;
+}
+
+static inline int inat_immediate_size(insn_attr_t attr)
+{
+	return (attr & INAT_IMM_MASK) >> INAT_IMM_OFFS;
+}
+
+static inline int inat_has_modrm(insn_attr_t attr)
+{
+	return attr & INAT_MODRM;
+}
+
+static inline int inat_is_force64(insn_attr_t attr)
+{
+	return attr & INAT_FORCE64;
+}
+
+static inline int inat_has_second_immediate(insn_attr_t attr)
+{
+	return attr & INAT_SCNDIMM;
+}
+
+static inline int inat_has_moffset(insn_attr_t attr)
+{
+	return attr & INAT_MOFFSET;
+}
+
+static inline int inat_has_variant(insn_attr_t attr)
+{
+	return attr & INAT_VARIANT;
+}
+
+static inline int inat_accept_vex(insn_attr_t attr)
+{
+	return attr & INAT_VEXOK;
+}
+
+static inline int inat_must_vex(insn_attr_t attr)
+{
+	return attr & INAT_VEXONLY;
+}
+#endif
diff --git a/arch/x86/include/asm/inat_types.h b/arch/x86/include/asm/inat_types.h
new file mode 100644
index 0000000..cb3c20c
--- /dev/null
+++ b/arch/x86/include/asm/inat_types.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_X86_INAT_TYPES_H
+#define _ASM_X86_INAT_TYPES_H
+/*
+ * x86 instruction attributes
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/* Instruction attributes */
+typedef unsigned int insn_attr_t;
+typedef unsigned char insn_byte_t;
+typedef signed int insn_value_t;
+
+#endif
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
new file mode 100644
index 0000000..96c2e0a
--- /dev/null
+++ b/arch/x86/include/asm/insn.h
@@ -0,0 +1,184 @@
+#ifndef _ASM_X86_INSN_H
+#define _ASM_X86_INSN_H
+/*
+ * x86 instruction analysis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ */
+
+/* insn_attr_t is defined in inat.h */
+#include <asm/inat.h>
+
+struct insn_field {
+	union {
+		insn_value_t value;
+		insn_byte_t bytes[4];
+	};
+	/* !0 if we've run insn_get_xxx() for this field */
+	unsigned char got;
+	unsigned char nbytes;
+};
+
+struct insn {
+	struct insn_field prefixes;	/*
+					 * Prefixes
+					 * prefixes.bytes[3]: last prefix
+					 */
+	struct insn_field rex_prefix;	/* REX prefix */
+	struct insn_field vex_prefix;	/* VEX prefix */
+	struct insn_field opcode;	/*
+					 * opcode.bytes[0]: opcode1
+					 * opcode.bytes[1]: opcode2
+					 * opcode.bytes[2]: opcode3
+					 */
+	struct insn_field modrm;
+	struct insn_field sib;
+	struct insn_field displacement;
+	union {
+		struct insn_field immediate;
+		struct insn_field moffset1;	/* for 64bit MOV */
+		struct insn_field immediate1;	/* for 64bit imm or off16/32 */
+	};
+	union {
+		struct insn_field moffset2;	/* for 64bit MOV */
+		struct insn_field immediate2;	/* for 64bit imm or seg16 */
+	};
+
+	insn_attr_t attr;
+	unsigned char opnd_bytes;
+	unsigned char addr_bytes;
+	unsigned char length;
+	unsigned char x86_64;
+
+	const insn_byte_t *kaddr;	/* kernel address of insn to analyze */
+	const insn_byte_t *next_byte;
+};
+
+#define X86_MODRM_MOD(modrm) (((modrm) & 0xc0) >> 6)
+#define X86_MODRM_REG(modrm) (((modrm) & 0x38) >> 3)
+#define X86_MODRM_RM(modrm) ((modrm) & 0x07)
+
+#define X86_SIB_SCALE(sib) (((sib) & 0xc0) >> 6)
+#define X86_SIB_INDEX(sib) (((sib) & 0x38) >> 3)
+#define X86_SIB_BASE(sib) ((sib) & 0x07)
+
+#define X86_REX_W(rex) ((rex) & 8)
+#define X86_REX_R(rex) ((rex) & 4)
+#define X86_REX_X(rex) ((rex) & 2)
+#define X86_REX_B(rex) ((rex) & 1)
+
+/* VEX bit flags  */
+#define X86_VEX_W(vex)	((vex) & 0x80)	/* VEX3 Byte2 */
+#define X86_VEX_R(vex)	((vex) & 0x80)	/* VEX2/3 Byte1 */
+#define X86_VEX_X(vex)	((vex) & 0x40)	/* VEX3 Byte1 */
+#define X86_VEX_B(vex)	((vex) & 0x20)	/* VEX3 Byte1 */
+#define X86_VEX_L(vex)	((vex) & 0x04)	/* VEX3 Byte2, VEX2 Byte1 */
+/* VEX bit fields */
+#define X86_VEX3_M(vex)	((vex) & 0x1f)		/* VEX3 Byte1 */
+#define X86_VEX2_M	1			/* VEX2.M always 1 */
+#define X86_VEX_V(vex)	(((vex) & 0x78) >> 3)	/* VEX3 Byte2, VEX2 Byte1 */
+#define X86_VEX_P(vex)	((vex) & 0x03)		/* VEX3 Byte2, VEX2 Byte1 */
+#define X86_VEX_M_MAX	0x1f			/* VEX3.M Maximum value */
+
+/* The last prefix is needed for two-byte and three-byte opcodes */
+static inline insn_byte_t insn_last_prefix(struct insn *insn)
+{
+	return insn->prefixes.bytes[3];
+}
+
+extern void insn_init(struct insn *insn, const void *kaddr, int x86_64);
+extern void insn_get_prefixes(struct insn *insn);
+extern void insn_get_opcode(struct insn *insn);
+extern void insn_get_modrm(struct insn *insn);
+extern void insn_get_sib(struct insn *insn);
+extern void insn_get_displacement(struct insn *insn);
+extern void insn_get_immediate(struct insn *insn);
+extern void insn_get_length(struct insn *insn);
+
+/* Attribute will be determined after getting ModRM (for opcode groups) */
+static inline void insn_get_attribute(struct insn *insn)
+{
+	insn_get_modrm(insn);
+}
+
+/* Instruction uses RIP-relative addressing */
+extern int insn_rip_relative(struct insn *insn);
+
+/* Init insn for kernel text */
+static inline void kernel_insn_init(struct insn *insn, const void *kaddr)
+{
+#ifdef CONFIG_X86_64
+	insn_init(insn, kaddr, 1);
+#else /* CONFIG_X86_32 */
+	insn_init(insn, kaddr, 0);
+#endif
+}
+
+static inline int insn_is_avx(struct insn *insn)
+{
+	if (!insn->prefixes.got)
+		insn_get_prefixes(insn);
+	return (insn->vex_prefix.value != 0);
+}
+
+static inline insn_byte_t insn_vex_m_bits(struct insn *insn)
+{
+	if (insn->vex_prefix.nbytes == 2)	/* 2 bytes VEX */
+		return X86_VEX2_M;
+	else
+		return X86_VEX3_M(insn->vex_prefix.bytes[1]);
+}
+
+static inline insn_byte_t insn_vex_p_bits(struct insn *insn)
+{
+	if (insn->vex_prefix.nbytes == 2)	/* 2 bytes VEX */
+		return X86_VEX_P(insn->vex_prefix.bytes[1]);
+	else
+		return X86_VEX_P(insn->vex_prefix.bytes[2]);
+}
+
+/* Offset of each field from kaddr */
+static inline int insn_offset_rex_prefix(struct insn *insn)
+{
+	return insn->prefixes.nbytes;
+}
+static inline int insn_offset_vex_prefix(struct insn *insn)
+{
+	return insn_offset_rex_prefix(insn) + insn->rex_prefix.nbytes;
+}
+static inline int insn_offset_opcode(struct insn *insn)
+{
+	return insn_offset_vex_prefix(insn) + insn->vex_prefix.nbytes;
+}
+static inline int insn_offset_modrm(struct insn *insn)
+{
+	return insn_offset_opcode(insn) + insn->opcode.nbytes;
+}
+static inline int insn_offset_sib(struct insn *insn)
+{
+	return insn_offset_modrm(insn) + insn->modrm.nbytes;
+}
+static inline int insn_offset_displacement(struct insn *insn)
+{
+	return insn_offset_sib(insn) + insn->sib.nbytes;
+}
+static inline int insn_offset_immediate(struct insn *insn)
+{
+	return insn_offset_displacement(insn) + insn->displacement.nbytes;
+}
+
+#endif /* _ASM_X86_INSN_H */
diff --git a/arch/x86/include/asm/iommu.h b/arch/x86/include/asm/iommu.h
index fd6d21b..345c99c 100644
--- a/arch/x86/include/asm/iommu.h
+++ b/arch/x86/include/asm/iommu.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_X86_IOMMU_H
 #define _ASM_X86_IOMMU_H
 
-extern void pci_iommu_shutdown(void);
-extern void no_iommu_init(void);
 extern struct dma_map_ops nommu_dma_ops;
 extern int force_iommu, no_iommu;
 extern int iommu_detected;
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index ddda6cb..5458380 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -34,9 +34,10 @@
 #ifdef CONFIG_HOTPLUG_CPU
 #include <linux/cpumask.h>
 extern void fixup_irqs(void);
+extern void irq_force_complete_move(int);
 #endif
 
-extern void (*generic_interrupt_extension)(void);
+extern void (*x86_platform_ipi_callback)(void);
 extern void native_init_IRQ(void);
 extern bool handle_irq(unsigned irq, struct pt_regs *regs);
 
diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h
index 5b21f0e..6a635bd 100644
--- a/arch/x86/include/asm/irq_vectors.h
+++ b/arch/x86/include/asm/irq_vectors.h
@@ -106,7 +106,7 @@
 /*
  * Generic system vector for platform specific use
  */
-#define GENERIC_INTERRUPT_VECTOR	0xed
+#define X86_PLATFORM_IPI_VECTOR		0xed
 
 /*
  * Performance monitoring pending work vector:
diff --git a/arch/x86/include/asm/k8.h b/arch/x86/include/asm/k8.h
index c2d1f3b..f70e600 100644
--- a/arch/x86/include/asm/k8.h
+++ b/arch/x86/include/asm/k8.h
@@ -4,13 +4,16 @@
 #include <linux/pci.h>
 
 extern struct pci_device_id k8_nb_ids[];
+struct bootnode;
 
 extern int early_is_k8_nb(u32 value);
 extern struct pci_dev **k8_northbridges;
 extern int num_k8_northbridges;
 extern int cache_k8_northbridges(void);
 extern void k8_flush_garts(void);
-extern int k8_scan_nodes(unsigned long start, unsigned long end);
+extern int k8_get_nodes(struct bootnode *nodes);
+extern int k8_numa_init(unsigned long start_pfn, unsigned long end_pfn);
+extern int k8_scan_nodes(void);
 
 #ifdef CONFIG_K8_NB
 static inline struct pci_dev *node_to_k8_nb_misc(int node)
diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 4a5fe91..950df43 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -19,6 +19,8 @@
 #define __KVM_HAVE_MSIX
 #define __KVM_HAVE_MCE
 #define __KVM_HAVE_PIT_STATE2
+#define __KVM_HAVE_XEN_HVM
+#define __KVM_HAVE_VCPU_EVENTS
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
@@ -79,6 +81,7 @@
 #define KVM_IRQCHIP_PIC_MASTER   0
 #define KVM_IRQCHIP_PIC_SLAVE    1
 #define KVM_IRQCHIP_IOAPIC       2
+#define KVM_NR_IRQCHIPS          3
 
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
@@ -250,4 +253,31 @@
 	__u8 pit_reinject;
 	__u8 reserved[31];
 };
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 has_error_code;
+		__u8 pad;
+		__u32 error_code;
+	} exception;
+	struct {
+		__u8 injected;
+		__u8 nr;
+		__u8 soft;
+		__u8 pad;
+	} interrupt;
+	struct {
+		__u8 injected;
+		__u8 pending;
+		__u8 masked;
+		__u8 pad;
+	} nmi;
+	__u32 sipi_vector;
+	__u32 flags;
+	__u32 reserved[10];
+};
+
 #endif /* _ASM_X86_KVM_H */
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index b7ed2c4..7c18e12 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -129,7 +129,7 @@
 	u8 seg_override;
 	unsigned int d;
 	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip;
+	unsigned long eip, eip_orig;
 	/* modrm */
 	u8 modrm;
 	u8 modrm_mod;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index d838922..4f865e8 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -354,7 +354,6 @@
 	unsigned int time_offset;
 	struct page *time_page;
 
-	bool singlestep; /* guest is single stepped by KVM */
 	bool nmi_pending;
 	bool nmi_injected;
 
@@ -371,6 +370,10 @@
 	u64 mcg_status;
 	u64 mcg_ctl;
 	u64 *mce_banks;
+
+	/* used for guest single stepping over the given code position */
+	u16 singlestep_cs;
+	unsigned long singlestep_rip;
 };
 
 struct kvm_mem_alias {
@@ -397,7 +400,6 @@
 	struct kvm_pic *vpic;
 	struct kvm_ioapic *vioapic;
 	struct kvm_pit *vpit;
-	struct hlist_head irq_ack_notifier_list;
 	int vapics_in_nmi_mode;
 
 	unsigned int tss_addr;
@@ -410,8 +412,10 @@
 	gpa_t ept_identity_map_addr;
 
 	unsigned long irq_sources_bitmap;
-	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
 	u64 vm_init_tsc;
+	s64 kvmclock_offset;
+
+	struct kvm_xen_hvm_config xen_hvm_config;
 };
 
 struct kvm_vm_stat {
@@ -461,7 +465,7 @@
 struct kvm_x86_ops {
 	int (*cpu_has_kvm_support)(void);          /* __init */
 	int (*disabled_by_bios)(void);             /* __init */
-	void (*hardware_enable)(void *dummy);      /* __init */
+	int (*hardware_enable)(void *dummy);
 	void (*hardware_disable)(void *dummy);
 	void (*check_processor_compatibility)(void *rtn);
 	int (*hardware_setup)(void);               /* __init */
@@ -477,8 +481,8 @@
 	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
 	void (*vcpu_put)(struct kvm_vcpu *vcpu);
 
-	int (*set_guest_debug)(struct kvm_vcpu *vcpu,
-			       struct kvm_guest_debug *dbg);
+	void (*set_guest_debug)(struct kvm_vcpu *vcpu,
+				struct kvm_guest_debug *dbg);
 	int (*get_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata);
 	int (*set_msr)(struct kvm_vcpu *vcpu, u32 msr_index, u64 data);
 	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
@@ -506,8 +510,8 @@
 
 	void (*tlb_flush)(struct kvm_vcpu *vcpu);
 
-	void (*run)(struct kvm_vcpu *vcpu, struct kvm_run *run);
-	int (*handle_exit)(struct kvm_run *run, struct kvm_vcpu *vcpu);
+	void (*run)(struct kvm_vcpu *vcpu);
+	int (*handle_exit)(struct kvm_vcpu *vcpu);
 	void (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
 	void (*set_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
 	u32 (*get_interrupt_shadow)(struct kvm_vcpu *vcpu, int mask);
@@ -519,6 +523,8 @@
 				bool has_error_code, u32 error_code);
 	int (*interrupt_allowed)(struct kvm_vcpu *vcpu);
 	int (*nmi_allowed)(struct kvm_vcpu *vcpu);
+	bool (*get_nmi_mask)(struct kvm_vcpu *vcpu);
+	void (*set_nmi_mask)(struct kvm_vcpu *vcpu, bool masked);
 	void (*enable_nmi_window)(struct kvm_vcpu *vcpu);
 	void (*enable_irq_window)(struct kvm_vcpu *vcpu);
 	void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
@@ -568,7 +574,7 @@
 #define EMULTYPE_NO_DECODE	    (1 << 0)
 #define EMULTYPE_TRAP_UD	    (1 << 1)
 #define EMULTYPE_SKIP		    (1 << 2)
-int emulate_instruction(struct kvm_vcpu *vcpu, struct kvm_run *run,
+int emulate_instruction(struct kvm_vcpu *vcpu,
 			unsigned long cr2, u16 error_code, int emulation_type);
 void kvm_report_emulation_failure(struct kvm_vcpu *cvpu, const char *context);
 void realmode_lgdt(struct kvm_vcpu *vcpu, u16 size, unsigned long address);
@@ -585,9 +591,9 @@
 
 struct x86_emulate_ctxt;
 
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+int kvm_emulate_pio(struct kvm_vcpu *vcpu, int in,
 		     int size, unsigned port);
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, int in,
 			   int size, unsigned long count, int down,
 			    gva_t address, int rep, unsigned port);
 void kvm_emulate_cpuid(struct kvm_vcpu *vcpu);
@@ -616,6 +622,9 @@
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data);
 
+unsigned long kvm_get_rflags(struct kvm_vcpu *vcpu);
+void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
+
 void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
@@ -802,4 +811,7 @@
 int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
 int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 
+void kvm_define_shared_msr(unsigned index, u32 msr);
+void kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
+
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index f1363b7..858baa0 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -108,6 +108,8 @@
 #define K8_MCE_THRESHOLD_BANK_5    (MCE_THRESHOLD_BASE + 5 * 9)
 #define K8_MCE_THRESHOLD_DRAM_ECC  (MCE_THRESHOLD_BANK_4 + 0)
 
+extern struct atomic_notifier_head x86_mce_decoder_chain;
+
 #ifdef __KERNEL__
 
 #include <linux/percpu.h>
@@ -118,9 +120,11 @@
 extern int mce_p5_enabled;
 
 #ifdef CONFIG_X86_MCE
-void mcheck_init(struct cpuinfo_x86 *c);
+int mcheck_init(void);
+void mcheck_cpu_init(struct cpuinfo_x86 *c);
 #else
-static inline void mcheck_init(struct cpuinfo_x86 *c) {}
+static inline int mcheck_init(void) { return 0; }
+static inline void mcheck_cpu_init(struct cpuinfo_x86 *c) {}
 #endif
 
 #ifdef CONFIG_X86_ANCIENT_MCE
@@ -214,5 +218,11 @@
 
 void mce_log_therm_throt_event(__u64 status);
 
+#ifdef CONFIG_X86_THERMAL_VECTOR
+extern void mcheck_intel_therm_init(void);
+#else
+static inline void mcheck_intel_therm_init(void) { }
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index ef51b50..c24ca9a 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -12,6 +12,8 @@
 enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
 
 struct microcode_ops {
+	void (*init)(struct device *device);
+	void (*fini)(void);
 	enum ucode_state (*request_microcode_user) (int cpu,
 				const void __user *buf, size_t size);
 
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index 79c9450..d8bf23a 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -71,12 +71,7 @@
 
 static inline void find_smp_config(void)
 {
-	x86_init.mpparse.find_smp_config(1);
-}
-
-static inline void early_find_smp_config(void)
-{
-	x86_init.mpparse.find_smp_config(0);
+	x86_init.mpparse.find_smp_config();
 }
 
 #ifdef CONFIG_X86_MPPARSE
@@ -89,7 +84,7 @@
 # else
 #  define default_mpc_oem_bus_info NULL
 # endif
-extern void default_find_smp_config(unsigned int reserve);
+extern void default_find_smp_config(void);
 extern void default_get_smp_config(unsigned int early);
 #else
 static inline void early_reserve_e820_mpc_new(void) { }
@@ -97,7 +92,7 @@
 #define default_mpc_apic_id NULL
 #define default_smp_read_mpc_oem NULL
 #define default_mpc_oem_bus_info NULL
-#define default_find_smp_config x86_init_uint_noop
+#define default_find_smp_config x86_init_noop
 #define default_get_smp_config x86_init_uint_noop
 #endif
 
@@ -163,14 +158,16 @@
 #define physids_shift_left(d, s, n)				\
 	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
 
-#define physids_coerce(map)			((map).mask[0])
+static inline unsigned long physids_coerce(physid_mask_t *map)
+{
+	return map->mask[0];
+}
 
-#define physids_promote(physids)					\
-	({								\
-		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
-		__physid_mask.mask[0] = physids;			\
-		__physid_mask;						\
-	})
+static inline void physids_promote(unsigned long physids, physid_mask_t *map)
+{
+	physids_clear(*map);
+	map->mask[0] = physids;
+}
 
 /* Note: will create very large stack frames if physid_mask_t is big */
 #define physid_mask_of_physid(physid)					\
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 7e2b6ba..5bef931 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -247,8 +247,8 @@
 #ifdef CONFIG_SMP
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
-void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
-void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
+void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
+void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
@@ -264,12 +264,12 @@
 	wrmsr(msr_no, l, h);
 	return 0;
 }
-static inline void rdmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+static inline void rdmsr_on_cpus(const struct cpumask *m, u32 msr_no,
 				struct msr *msrs)
 {
        rdmsr_on_cpu(0, msr_no, &(msrs[0].l), &(msrs[0].h));
 }
-static inline void wrmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+static inline void wrmsr_on_cpus(const struct cpumask *m, u32 msr_no,
 				struct msr *msrs)
 {
        wrmsr_on_cpu(0, msr_no, msrs[0].l, msrs[0].h);
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index 6473f5c..642fe34 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -49,7 +49,8 @@
 extern unsigned long init_memory_mapping(unsigned long start,
 					 unsigned long end);
 
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8);
 extern void free_initmem(void);
 
 #endif	/* !__ASSEMBLY__ */
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index ad7ce3f..8d9f854 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -28,9 +28,20 @@
  */
 #define ARCH_PERFMON_EVENT_MASK				    0xffff
 
+/*
+ * filter mask to validate fixed counter events.
+ * the following filters disqualify for fixed counters:
+ *  - inv
+ *  - edge
+ *  - cnt-mask
+ *  The other filters are supported by fixed counters.
+ *  The any-thread option is supported starting with v3.
+ */
+#define ARCH_PERFMON_EVENT_FILTER_MASK			0xff840000
+
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL		      0x3c
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK		(0x00 << 8)
-#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX 		 0
+#define ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX			 0
 #define ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT \
 		(1 << (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX))
 
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index af6fd36..a34c785 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -16,6 +16,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/x86_init.h>
+
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -270,9 +272,9 @@
 					 unsigned long new_flags)
 {
 	/*
-	 * PAT type is always WB for ISA. So no need to check.
+	 * PAT type is always WB for untracked ranges, so no need to check.
 	 */
-	if (is_ISA_range(paddr, paddr + size - 1))
+	if (x86_platform.is_untracked_pat_range(paddr, paddr + size))
 		return 1;
 
 	/*
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c978648..6f8ec1c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -30,6 +30,7 @@
 #include <linux/math64.h>
 #include <linux/init.h>
 
+#define HBP_NUM 4
 /*
  * Default implementation of macro that returns current
  * instruction pointer ("program counter").
@@ -422,6 +423,8 @@
 extern void free_thread_xstate(struct task_struct *);
 extern struct kmem_cache *task_xstate_cachep;
 
+struct perf_event;
+
 struct thread_struct {
 	/* Cached TLS descriptors: */
 	struct desc_struct	tls_array[GDT_ENTRY_TLS_ENTRIES];
@@ -443,13 +446,10 @@
 	unsigned long		fs;
 #endif
 	unsigned long		gs;
-	/* Hardware debugging registers: */
-	unsigned long		debugreg0;
-	unsigned long		debugreg1;
-	unsigned long		debugreg2;
-	unsigned long		debugreg3;
-	unsigned long		debugreg6;
-	unsigned long		debugreg7;
+	/* Save middle states of ptrace breakpoints */
+	struct perf_event	*ptrace_bps[HBP_NUM];
+	/* Debug status used for traps, single steps, etc... */
+	unsigned long           debugreg6;
 	/* Fault info: */
 	unsigned long		cr2;
 	unsigned long		trap_no;
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index 621f56d..4009f65 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -5,18 +5,19 @@
 
 /* misc architecture specific prototypes */
 
-extern void early_idt_handler(void);
+void early_idt_handler(void);
 
-extern void system_call(void);
-extern void syscall_init(void);
+void system_call(void);
+void syscall_init(void);
 
-extern void ia32_syscall(void);
-extern void ia32_cstar_target(void);
-extern void ia32_sysenter_target(void);
+void ia32_syscall(void);
+void ia32_cstar_target(void);
+void ia32_sysenter_target(void);
 
-extern void syscall32_cpu_init(void);
+void syscall32_cpu_init(void);
 
-extern void check_efer(void);
+void x86_configure_nx(void);
+void x86_report_nx(void);
 
 extern int reboot_force;
 
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 0f0d908..3d11fd0 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -7,6 +7,7 @@
 
 #ifdef __KERNEL__
 #include <asm/segment.h>
+#include <asm/page_types.h>
 #endif
 
 #ifndef __ASSEMBLY__
@@ -216,6 +217,67 @@
 	return regs->sp;
 }
 
+/* Query offset/name of register from its name/offset */
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, ss))
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten.
+ * @offset:	offset number of the register.
+ *
+ * regs_get_register returns the value of a register. The @offset is the
+ * offset of the register in struct pt_regs address which specified by @regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @addr:	address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static inline int regs_within_kernel_stack(struct pt_regs *regs,
+					   unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						      unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
+/* Get Nth argument at function call */
+extern unsigned long regs_get_argument_nth(struct pt_regs *regs,
+					   unsigned int n);
+
 /*
  * These are defined as per linux/ptrace.h, which see.
  */
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 1b7ee5d..0a52424 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -2,7 +2,13 @@
 #define _ASM_X86_SECTIONS_H
 
 #include <asm-generic/sections.h>
+#include <asm/uaccess.h>
 
 extern char __brk_base[], __brk_limit[];
+extern struct exception_table_entry __stop___ex_table[];
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+extern char __end_rodata_hpage_align[];
+#endif
 
 #endif	/* _ASM_X86_SECTIONS_H */
diff --git a/arch/x86/include/asm/string_32.h b/arch/x86/include/asm/string_32.h
index ae907e6..3d3e835 100644
--- a/arch/x86/include/asm/string_32.h
+++ b/arch/x86/include/asm/string_32.h
@@ -177,10 +177,15 @@
  */
 
 #ifndef CONFIG_KMEMCHECK
+
+#if (__GNUC__ >= 4)
+#define memcpy(t, f, n) __builtin_memcpy(t, f, n)
+#else
 #define memcpy(t, f, n)				\
 	(__builtin_constant_p((n))		\
 	 ? __constant_memcpy((t), (f), (n))	\
 	 : __memcpy((t), (f), (n)))
+#endif
 #else
 /*
  * kmemcheck becomes very happy if we use the REP instructions unconditionally,
@@ -316,11 +321,15 @@
 	 : __memset_generic((s), (c), (count)))
 
 #define __HAVE_ARCH_MEMSET
+#if (__GNUC__ >= 4)
+#define memset(s, c, count) __builtin_memset(s, c, count)
+#else
 #define memset(s, c, count)						\
 	(__builtin_constant_p(c)					\
 	 ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \
 				 (count))				\
 	 : __memset((s), (c), (count)))
+#endif
 
 /*
  * find the first occurrence of byte 'c', or 1 past the area if none
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 85574b7..1fecb7e 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -57,7 +57,8 @@
 	u16 intercept_dr_write;
 	u32 intercept_exceptions;
 	u64 intercept;
-	u8 reserved_1[44];
+	u8 reserved_1[42];
+	u16 pause_filter_count;
 	u64 iopm_base_pa;
 	u64 msrpm_base_pa;
 	u64 tsc_offset;
diff --git a/arch/x86/include/asm/swiotlb.h b/arch/x86/include/asm/swiotlb.h
index b9e4e20..87ffcb1 100644
--- a/arch/x86/include/asm/swiotlb.h
+++ b/arch/x86/include/asm/swiotlb.h
@@ -3,17 +3,14 @@
 
 #include <linux/swiotlb.h>
 
-/* SWIOTLB interface */
-
-extern int swiotlb_force;
-
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
-extern void pci_swiotlb_init(void);
+extern int pci_swiotlb_init(void);
 #else
 #define swiotlb 0
-static inline void pci_swiotlb_init(void)
+static inline int pci_swiotlb_init(void)
 {
+	return 0;
 }
 #endif
 
diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h
index 72a6dcd..9af9dec 100644
--- a/arch/x86/include/asm/sys_ia32.h
+++ b/arch/x86/include/asm/sys_ia32.h
@@ -51,11 +51,6 @@
 asmlinkage long sys32_rt_sigpending(compat_sigset_t __user *, compat_size_t);
 asmlinkage long sys32_rt_sigqueueinfo(int, int, compat_siginfo_t __user *);
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-struct sysctl_ia32;
-asmlinkage long sys32_sysctl(struct sysctl_ia32 __user *);
-#endif
-
 asmlinkage long sys32_pread(unsigned int, char __user *, u32, u32, u32);
 asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32);
 
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index f08f973..022a843 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -128,8 +128,6 @@
 	     "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */	  \
 	     "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */	  \
 	     "call __switch_to\n\t"					  \
-	     ".globl thread_return\n"					  \
-	     "thread_return:\n\t"					  \
 	     "movq "__percpu_arg([current_task])",%%rsi\n\t"		  \
 	     __switch_canary						  \
 	     "movq %P[thread_info](%%rsi),%%r8\n\t"			  \
@@ -157,19 +155,22 @@
  * Load a segment. Fall back on loading the zero
  * segment if something goes wrong..
  */
-#define loadsegment(seg, value)			\
-	asm volatile("\n"			\
-		     "1:\t"			\
-		     "movl %k0,%%" #seg "\n"	\
-		     "2:\n"			\
-		     ".section .fixup,\"ax\"\n"	\
-		     "3:\t"			\
-		     "movl %k1, %%" #seg "\n\t"	\
-		     "jmp 2b\n"			\
-		     ".previous\n"		\
-		     _ASM_EXTABLE(1b,3b)	\
-		     : :"r" (value), "r" (0) : "memory")
-
+#define loadsegment(seg, value)						\
+do {									\
+	unsigned short __val = (value);					\
+									\
+	asm volatile("						\n"	\
+		     "1:	movl %k0,%%" #seg "		\n"	\
+									\
+		     ".section .fixup,\"ax\"			\n"	\
+		     "2:	xorl %k0,%k0			\n"	\
+		     "		jmp 1b				\n"	\
+		     ".previous					\n"	\
+									\
+		     _ASM_EXTABLE(1b, 2b)				\
+									\
+		     : "+r" (__val) : : "memory");			\
+} while (0)
 
 /*
  * Save a segment register away
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index d27d0a2..375c917 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -83,6 +83,7 @@
 #define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
 #define TIF_SECCOMP		8	/* secure computing */
 #define TIF_MCE_NOTIFY		10	/* notify userspace of an MCE */
+#define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_IA32		17	/* 32bit process */
 #define TIF_FORK		18	/* ret_from_fork */
@@ -107,6 +108,7 @@
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 #define _TIF_MCE_NOTIFY		(1 << TIF_MCE_NOTIFY)
+#define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_IA32		(1 << TIF_IA32)
 #define _TIF_FORK		(1 << TIF_FORK)
@@ -142,13 +144,14 @@
 
 /* Only used for 64 bit */
 #define _TIF_DO_NOTIFY_MASK						\
-	(_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_NOTIFY_RESUME)
+	(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME |	\
+	 _TIF_USER_RETURN_NOTIFY)
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW							\
 	(_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_NOTSC)
 
-#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
+#define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)
 #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
 
 #define PREEMPT_ACTIVE		0x10000000
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index d2c6c93..abd3e0e 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -570,7 +570,6 @@
 #ifdef CONFIG_X86_32
 # include "uaccess_32.h"
 #else
-# define ARCH_HAS_SEARCH_EXTABLE
 # include "uaccess_64.h"
 #endif
 
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index 632fb44..0c9825e 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -187,9 +187,34 @@
 
 unsigned long __must_check copy_to_user(void __user *to,
 					const void *from, unsigned long n);
-unsigned long __must_check copy_from_user(void *to,
+unsigned long __must_check _copy_from_user(void *to,
 					  const void __user *from,
 					  unsigned long n);
+
+
+extern void copy_from_user_overflow(void)
+#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
+	__compiletime_error("copy_from_user() buffer size is not provably correct")
+#else
+	__compiletime_warning("copy_from_user() buffer size is not provably correct")
+#endif
+;
+
+static inline unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n)
+{
+	int sz = __compiletime_object_size(to);
+	int ret = -EFAULT;
+
+	if (likely(sz == -1 || sz >= n))
+		ret = _copy_from_user(to, from, n);
+	else
+		copy_from_user_overflow();
+
+	return ret;
+}
+
 long __must_check strncpy_from_user(char *dst, const char __user *src,
 				    long count);
 long __must_check __strncpy_from_user(char *dst,
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index db24b21..46324c6 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -19,12 +19,37 @@
 copy_user_generic(void *to, const void *from, unsigned len);
 
 __must_check unsigned long
-copy_to_user(void __user *to, const void *from, unsigned len);
+_copy_to_user(void __user *to, const void *from, unsigned len);
 __must_check unsigned long
-copy_from_user(void *to, const void __user *from, unsigned len);
+_copy_from_user(void *to, const void __user *from, unsigned len);
 __must_check unsigned long
 copy_in_user(void __user *to, const void __user *from, unsigned len);
 
+static inline unsigned long __must_check copy_from_user(void *to,
+					  const void __user *from,
+					  unsigned long n)
+{
+	int sz = __compiletime_object_size(to);
+	int ret = -EFAULT;
+
+	might_fault();
+	if (likely(sz == -1 || sz >= n))
+		ret = _copy_from_user(to, from, n);
+#ifdef CONFIG_DEBUG_VM
+	else
+		WARN(1, "Buffer overflow detected!\n");
+#endif
+	return ret;
+}
+
+static __always_inline __must_check
+int copy_to_user(void __user *dst, const void *src, unsigned size)
+{
+	might_fault();
+
+	return _copy_to_user(dst, src, size);
+}
+
 static __always_inline __must_check
 int __copy_from_user(void *dst, const void __user *src, unsigned size)
 {
@@ -176,8 +201,11 @@
 __must_check unsigned long clear_user(void __user *mem, unsigned long len);
 __must_check unsigned long __clear_user(void __user *mem, unsigned long len);
 
-__must_check long __copy_from_user_inatomic(void *dst, const void __user *src,
-					    unsigned size);
+static __must_check __always_inline int
+__copy_from_user_inatomic(void *dst, const void __user *src, unsigned size)
+{
+	return copy_user_generic(dst, (__force const void *)src, size);
+}
 
 static __must_check __always_inline int
 __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 6fb3c20..3baf379 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -342,10 +342,11 @@
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
 #define __NR_perf_event_open	336
+#define __NR_recvmmsg		337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 337
+#define NR_syscalls 338
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 8d3ad0a..4843f7b 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -661,6 +661,8 @@
 __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
 #define __NR_perf_event_open			298
 __SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_recvmmsg				299
+__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/uv/uv_irq.h b/arch/x86/include/asm/uv/uv_irq.h
index 9613c8c..d6b17c7 100644
--- a/arch/x86/include/asm/uv/uv_irq.h
+++ b/arch/x86/include/asm/uv/uv_irq.h
@@ -25,12 +25,14 @@
 		dest		: 32;
 };
 
-extern struct irq_chip uv_irq_chip;
+enum {
+	UV_AFFINITY_ALL,
+	UV_AFFINITY_NODE,
+	UV_AFFINITY_CPU
+};
 
-extern int arch_enable_uv_irq(char *, unsigned int, int, int, unsigned long);
-extern void arch_disable_uv_irq(int, unsigned long);
-
-extern int uv_setup_irq(char *, int, int, unsigned long);
-extern void uv_teardown_irq(unsigned int, int, unsigned long);
+extern int uv_irq_2_mmr_info(int, unsigned long *, int *);
+extern int uv_setup_irq(char *, int, int, unsigned long, int);
+extern void uv_teardown_irq(unsigned int);
 
 #endif /* _ASM_X86_UV_UV_IRQ_H */
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 272514c..2b49454 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -56,6 +56,7 @@
 #define SECONDARY_EXEC_ENABLE_VPID              0x00000020
 #define SECONDARY_EXEC_WBINVD_EXITING		0x00000040
 #define SECONDARY_EXEC_UNRESTRICTED_GUEST	0x00000080
+#define SECONDARY_EXEC_PAUSE_LOOP_EXITING	0x00000400
 
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
@@ -144,6 +145,8 @@
 	VM_ENTRY_INSTRUCTION_LEN        = 0x0000401a,
 	TPR_THRESHOLD                   = 0x0000401c,
 	SECONDARY_VM_EXEC_CONTROL       = 0x0000401e,
+	PLE_GAP                         = 0x00004020,
+	PLE_WINDOW                      = 0x00004022,
 	VM_INSTRUCTION_ERROR            = 0x00004400,
 	VM_EXIT_REASON                  = 0x00004402,
 	VM_EXIT_INTR_INFO               = 0x00004404,
@@ -248,6 +251,7 @@
 #define EXIT_REASON_MSR_READ            31
 #define EXIT_REASON_MSR_WRITE           32
 #define EXIT_REASON_MWAIT_INSTRUCTION   36
+#define EXIT_REASON_PAUSE_INSTRUCTION   40
 #define EXIT_REASON_MCE_DURING_VMENTRY	 41
 #define EXIT_REASON_TPR_BELOW_THRESHOLD 43
 #define EXIT_REASON_APIC_ACCESS         44
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 2c756fd..ea0e8ea 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -26,7 +26,7 @@
 	void (*smp_read_mpc_oem)(struct mpc_table *mpc);
 	void (*mpc_oem_pci_bus)(struct mpc_bus *m);
 	void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name);
-	void (*find_smp_config)(unsigned int reserve);
+	void (*find_smp_config)(void);
 	void (*get_smp_config)(unsigned int early);
 };
 
@@ -91,6 +91,14 @@
 };
 
 /**
+ * struct x86_init_iommu - platform specific iommu setup
+ * @iommu_init:			platform specific iommu setup
+ */
+struct x86_init_iommu {
+	int (*iommu_init)(void);
+};
+
+/**
  * struct x86_init_ops - functions for platform specific setup
  *
  */
@@ -101,6 +109,7 @@
 	struct x86_init_oem		oem;
 	struct x86_init_paging		paging;
 	struct x86_init_timers		timers;
+	struct x86_init_iommu		iommu;
 };
 
 /**
@@ -116,11 +125,14 @@
  * @calibrate_tsc:		calibrate TSC
  * @get_wallclock:		get time from HW clock like RTC etc.
  * @set_wallclock:		set time back to HW clock
+ * @is_untracked_pat_range	exclude from PAT logic
  */
 struct x86_platform_ops {
 	unsigned long (*calibrate_tsc)(void);
 	unsigned long (*get_wallclock)(void);
 	int (*set_wallclock)(unsigned long nowtime);
+	void (*iommu_shutdown)(void);
+	bool (*is_untracked_pat_range)(u64 start, u64 end);
 };
 
 extern struct x86_init_ops x86_init;
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index d8e5d0cd..4f2e66e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -40,7 +40,7 @@
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o
 obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
-obj-y			+= alternative.o i8253.o pci-nommu.o
+obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index d296f4a..d85d1b2 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -79,7 +79,8 @@
 	struct cpuinfo_x86 *c = &cpu_data(pr->id);
 
 	pr->pdc = NULL;
-	if (c->x86_vendor == X86_VENDOR_INTEL)
+	if (c->x86_vendor == X86_VENDOR_INTEL ||
+	    c->x86_vendor == X86_VENDOR_CENTAUR)
 		init_intel_pdc(pr, c);
 
 	return;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index ca93638..82e5086 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -78,12 +78,9 @@
 #ifndef CONFIG_64BIT
 	store_gdt((struct desc_ptr *)&header->pmode_gdt);
 
-	header->pmode_efer_low = nx_enabled;
-	if (header->pmode_efer_low & 1) {
-		/* This is strange, why not save efer, always? */
-		rdmsr(MSR_EFER, header->pmode_efer_low,
-			header->pmode_efer_high);
-	}
+	if (rdmsr_safe(MSR_EFER, &header->pmode_efer_low,
+		       &header->pmode_efer_high))
+		header->pmode_efer_low = header->pmode_efer_high = 0;
 #endif /* !CONFIG_64BIT */
 
 	header->pmode_cr0 = read_cr0();
@@ -119,29 +116,32 @@
 
 
 /**
- * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation
  *
  * We allocate a page from the first 1MB of memory for the wakeup
  * routine for when we come back from a sleep state. The
  * runtime allocator allows specification of <16MB pages, but not
  * <1MB pages.
  */
-void __init acpi_reserve_bootmem(void)
+void __init acpi_reserve_wakeup_memory(void)
 {
+	unsigned long mem;
+
 	if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
 		printk(KERN_ERR
 		       "ACPI: Wakeup code way too big, S3 disabled.\n");
 		return;
 	}
 
-	acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE);
+	mem = find_e820_area(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE);
 
-	if (!acpi_realmode) {
+	if (mem == -1L) {
 		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
 		return;
 	}
-
-	acpi_wakeup_address = virt_to_phys((void *)acpi_realmode);
+	acpi_realmode = (unsigned long) phys_to_virt(mem);
+	acpi_wakeup_address = mem;
+	reserve_early(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP");
 }
 
 
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0285521..32fb091 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -28,6 +28,7 @@
 #include <asm/proto.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/amd_iommu_proto.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 
@@ -56,20 +57,115 @@
 	u32 data[4];
 };
 
-static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
-			     struct unity_map_entry *e);
-static struct dma_ops_domain *find_protection_domain(u16 devid);
-static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address, int end_lvl,
-		      u64 **pte_page, gfp_t gfp);
-static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
-				      unsigned long start_page,
-				      unsigned int pages);
 static void reset_iommu_command_buffer(struct amd_iommu *iommu);
-static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address, int map_size);
 static void update_domain(struct protection_domain *domain);
 
+/****************************************************************************
+ *
+ * Helper functions
+ *
+ ****************************************************************************/
+
+static inline u16 get_device_id(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	return calc_devid(pdev->bus->number, pdev->devfn);
+}
+
+static struct iommu_dev_data *get_dev_data(struct device *dev)
+{
+	return dev->archdata.iommu;
+}
+
+/*
+ * In this function the list of preallocated protection domains is traversed to
+ * find the domain for a specific device
+ */
+static struct dma_ops_domain *find_protection_domain(u16 devid)
+{
+	struct dma_ops_domain *entry, *ret = NULL;
+	unsigned long flags;
+	u16 alias = amd_iommu_alias_table[devid];
+
+	if (list_empty(&iommu_pd_list))
+		return NULL;
+
+	spin_lock_irqsave(&iommu_pd_list_lock, flags);
+
+	list_for_each_entry(entry, &iommu_pd_list, list) {
+		if (entry->target_dev == devid ||
+		    entry->target_dev == alias) {
+			ret = entry;
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+
+	return ret;
+}
+
+/*
+ * This function checks if the driver got a valid device from the caller to
+ * avoid dereferencing invalid pointers.
+ */
+static bool check_device(struct device *dev)
+{
+	u16 devid;
+
+	if (!dev || !dev->dma_mask)
+		return false;
+
+	/* No device or no PCI device */
+	if (!dev || dev->bus != &pci_bus_type)
+		return false;
+
+	devid = get_device_id(dev);
+
+	/* Out of our scope? */
+	if (devid > amd_iommu_last_bdf)
+		return false;
+
+	if (amd_iommu_rlookup_table[devid] == NULL)
+		return false;
+
+	return true;
+}
+
+static int iommu_init_device(struct device *dev)
+{
+	struct iommu_dev_data *dev_data;
+	struct pci_dev *pdev;
+	u16 devid, alias;
+
+	if (dev->archdata.iommu)
+		return 0;
+
+	dev_data = kzalloc(sizeof(*dev_data), GFP_KERNEL);
+	if (!dev_data)
+		return -ENOMEM;
+
+	dev_data->dev = dev;
+
+	devid = get_device_id(dev);
+	alias = amd_iommu_alias_table[devid];
+	pdev = pci_get_bus_and_slot(PCI_BUS(alias), alias & 0xff);
+	if (pdev)
+		dev_data->alias = &pdev->dev;
+
+	atomic_set(&dev_data->bind, 0);
+
+	dev->archdata.iommu = dev_data;
+
+
+	return 0;
+}
+
+static void iommu_uninit_device(struct device *dev)
+{
+	kfree(dev->archdata.iommu);
+}
 #ifdef CONFIG_AMD_IOMMU_STATS
 
 /*
@@ -90,7 +186,6 @@
 DECLARE_STATS_COUNTER(total_map_requests);
 
 static struct dentry *stats_dir;
-static struct dentry *de_isolate;
 static struct dentry *de_fflush;
 
 static void amd_iommu_stats_add(struct __iommu_counter *cnt)
@@ -108,9 +203,6 @@
 	if (stats_dir == NULL)
 		return;
 
-	de_isolate = debugfs_create_bool("isolation", 0444, stats_dir,
-					 (u32 *)&amd_iommu_isolate);
-
 	de_fflush  = debugfs_create_bool("fullflush", 0444, stats_dir,
 					 (u32 *)&amd_iommu_unmap_flush);
 
@@ -130,12 +222,6 @@
 
 #endif
 
-/* returns !0 if the IOMMU is caching non-present entries in its TLB */
-static int iommu_has_npcache(struct amd_iommu *iommu)
-{
-	return iommu->cap & (1UL << IOMMU_CAP_NPCACHE);
-}
-
 /****************************************************************************
  *
  * Interrupt handling functions
@@ -199,6 +285,7 @@
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		iommu->reset_in_progress = true;
 		reset_iommu_command_buffer(iommu);
 		dump_command(address);
 		break;
@@ -321,11 +408,8 @@
 	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
 	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-	if (unlikely(i == EXIT_LOOP_COUNT)) {
-		spin_unlock(&iommu->lock);
-		reset_iommu_command_buffer(iommu);
-		spin_lock(&iommu->lock);
-	}
+	if (unlikely(i == EXIT_LOOP_COUNT))
+		iommu->reset_in_progress = true;
 }
 
 /*
@@ -372,26 +456,46 @@
 out:
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
+	if (iommu->reset_in_progress)
+		reset_iommu_command_buffer(iommu);
+
 	return 0;
 }
 
+static void iommu_flush_complete(struct protection_domain *domain)
+{
+	int i;
+
+	for (i = 0; i < amd_iommus_present; ++i) {
+		if (!domain->dev_iommu[i])
+			continue;
+
+		/*
+		 * Devices of this domain are behind this IOMMU
+		 * We need to wait for completion of all commands.
+		 */
+		iommu_completion_wait(amd_iommus[i]);
+	}
+}
+
 /*
  * Command send function for invalidating a device table entry
  */
-static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
+static int iommu_flush_device(struct device *dev)
 {
+	struct amd_iommu *iommu;
 	struct iommu_cmd cmd;
-	int ret;
+	u16 devid;
 
-	BUG_ON(iommu == NULL);
+	devid = get_device_id(dev);
+	iommu = amd_iommu_rlookup_table[devid];
 
+	/* Build command */
 	memset(&cmd, 0, sizeof(cmd));
 	CMD_SET_TYPE(&cmd, CMD_INV_DEV_ENTRY);
 	cmd.data[0] = devid;
 
-	ret = iommu_queue_command(iommu, &cmd);
-
-	return ret;
+	return iommu_queue_command(iommu, &cmd);
 }
 
 static void __iommu_build_inv_iommu_pages(struct iommu_cmd *cmd, u64 address,
@@ -430,11 +534,11 @@
  * It invalidates a single PTE if the range to flush is within a single
  * page. Otherwise it flushes the whole TLB of the IOMMU.
  */
-static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
-		u64 address, size_t size)
+static void __iommu_flush_pages(struct protection_domain *domain,
+				u64 address, size_t size, int pde)
 {
-	int s = 0;
-	unsigned pages = iommu_num_pages(address, size, PAGE_SIZE);
+	int s = 0, i;
+	unsigned long pages = iommu_num_pages(address, size, PAGE_SIZE);
 
 	address &= PAGE_MASK;
 
@@ -447,113 +551,96 @@
 		s = 1;
 	}
 
-	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, s);
 
-	return 0;
+	for (i = 0; i < amd_iommus_present; ++i) {
+		if (!domain->dev_iommu[i])
+			continue;
+
+		/*
+		 * Devices of this domain are behind this IOMMU
+		 * We need a TLB flush
+		 */
+		iommu_queue_inv_iommu_pages(amd_iommus[i], address,
+					    domain->id, pde, s);
+	}
+
+	return;
+}
+
+static void iommu_flush_pages(struct protection_domain *domain,
+			     u64 address, size_t size)
+{
+	__iommu_flush_pages(domain, address, size, 0);
 }
 
 /* Flush the whole IO/TLB for a given protection domain */
-static void iommu_flush_tlb(struct amd_iommu *iommu, u16 domid)
+static void iommu_flush_tlb(struct protection_domain *domain)
 {
-	u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
-
-	INC_STATS_COUNTER(domain_flush_single);
-
-	iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 1);
+	__iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 0);
 }
 
 /* Flush the whole IO/TLB for a given protection domain - including PDE */
-static void iommu_flush_tlb_pde(struct amd_iommu *iommu, u16 domid)
+static void iommu_flush_tlb_pde(struct protection_domain *domain)
 {
-       u64 address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS;
-
-       INC_STATS_COUNTER(domain_flush_single);
-
-       iommu_queue_inv_iommu_pages(iommu, address, domid, 1, 1);
+	__iommu_flush_pages(domain, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS, 1);
 }
 
+
 /*
- * This function flushes one domain on one IOMMU
+ * This function flushes the DTEs for all devices in domain
  */
-static void flush_domain_on_iommu(struct amd_iommu *iommu, u16 domid)
+static void iommu_flush_domain_devices(struct protection_domain *domain)
 {
-	struct iommu_cmd cmd;
+	struct iommu_dev_data *dev_data;
 	unsigned long flags;
 
-	__iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
-				      domid, 1, 1);
+	spin_lock_irqsave(&domain->lock, flags);
 
-	spin_lock_irqsave(&iommu->lock, flags);
-	__iommu_queue_command(iommu, &cmd);
-	__iommu_completion_wait(iommu);
-	__iommu_wait_for_completion(iommu);
-	spin_unlock_irqrestore(&iommu->lock, flags);
+	list_for_each_entry(dev_data, &domain->dev_list, list)
+		iommu_flush_device(dev_data->dev);
+
+	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
-static void flush_all_domains_on_iommu(struct amd_iommu *iommu)
+static void iommu_flush_all_domain_devices(void)
 {
-	int i;
+	struct protection_domain *domain;
+	unsigned long flags;
 
-	for (i = 1; i < MAX_DOMAIN_ID; ++i) {
-		if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
-			continue;
-		flush_domain_on_iommu(iommu, i);
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+
+	list_for_each_entry(domain, &amd_iommu_pd_list, list) {
+		iommu_flush_domain_devices(domain);
+		iommu_flush_complete(domain);
 	}
 
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
+}
+
+void amd_iommu_flush_all_devices(void)
+{
+	iommu_flush_all_domain_devices();
 }
 
 /*
- * This function is used to flush the IO/TLB for a given protection domain
- * on every IOMMU in the system
+ * This function uses heavy locking and may disable irqs for some time. But
+ * this is no issue because it is only called during resume.
  */
-static void iommu_flush_domain(u16 domid)
-{
-	struct amd_iommu *iommu;
-
-	INC_STATS_COUNTER(domain_flush_all);
-
-	for_each_iommu(iommu)
-		flush_domain_on_iommu(iommu, domid);
-}
-
 void amd_iommu_flush_all_domains(void)
 {
-	struct amd_iommu *iommu;
+	struct protection_domain *domain;
+	unsigned long flags;
 
-	for_each_iommu(iommu)
-		flush_all_domains_on_iommu(iommu);
-}
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
 
-static void flush_all_devices_for_iommu(struct amd_iommu *iommu)
-{
-	int i;
-
-	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (iommu != amd_iommu_rlookup_table[i])
-			continue;
-
-		iommu_queue_inv_dev_entry(iommu, i);
-		iommu_completion_wait(iommu);
+	list_for_each_entry(domain, &amd_iommu_pd_list, list) {
+		spin_lock(&domain->lock);
+		iommu_flush_tlb_pde(domain);
+		iommu_flush_complete(domain);
+		spin_unlock(&domain->lock);
 	}
-}
 
-static void flush_devices_by_domain(struct protection_domain *domain)
-{
-	struct amd_iommu *iommu;
-	int i;
-
-	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if ((domain == NULL && amd_iommu_pd_table[i] == NULL) ||
-		    (amd_iommu_pd_table[i] != domain))
-			continue;
-
-		iommu = amd_iommu_rlookup_table[i];
-		if (!iommu)
-			continue;
-
-		iommu_queue_inv_dev_entry(iommu, i);
-		iommu_completion_wait(iommu);
-	}
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
 }
 
 static void reset_iommu_command_buffer(struct amd_iommu *iommu)
@@ -563,20 +650,13 @@
 	if (iommu->reset_in_progress)
 		panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
 
-	iommu->reset_in_progress = true;
-
 	amd_iommu_reset_cmd_buffer(iommu);
-	flush_all_devices_for_iommu(iommu);
-	flush_all_domains_on_iommu(iommu);
+	amd_iommu_flush_all_devices();
+	amd_iommu_flush_all_domains();
 
 	iommu->reset_in_progress = false;
 }
 
-void amd_iommu_flush_all_devices(void)
-{
-	flush_devices_by_domain(NULL);
-}
-
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
@@ -585,6 +665,100 @@
  ****************************************************************************/
 
 /*
+ * This function is used to add another level to an IO page table. Adding
+ * another level increases the size of the address space by 9 bits to a size up
+ * to 64 bits.
+ */
+static bool increase_address_space(struct protection_domain *domain,
+				   gfp_t gfp)
+{
+	u64 *pte;
+
+	if (domain->mode == PAGE_MODE_6_LEVEL)
+		/* address space already 64 bit large */
+		return false;
+
+	pte = (void *)get_zeroed_page(gfp);
+	if (!pte)
+		return false;
+
+	*pte             = PM_LEVEL_PDE(domain->mode,
+					virt_to_phys(domain->pt_root));
+	domain->pt_root  = pte;
+	domain->mode    += 1;
+	domain->updated  = true;
+
+	return true;
+}
+
+static u64 *alloc_pte(struct protection_domain *domain,
+		      unsigned long address,
+		      int end_lvl,
+		      u64 **pte_page,
+		      gfp_t gfp)
+{
+	u64 *pte, *page;
+	int level;
+
+	while (address > PM_LEVEL_SIZE(domain->mode))
+		increase_address_space(domain, gfp);
+
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+
+	while (level > end_lvl) {
+		if (!IOMMU_PTE_PRESENT(*pte)) {
+			page = (u64 *)get_zeroed_page(gfp);
+			if (!page)
+				return NULL;
+			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
+		}
+
+		level -= 1;
+
+		pte = IOMMU_PTE_PAGE(*pte);
+
+		if (pte_page && level == end_lvl)
+			*pte_page = pte;
+
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
+	}
+
+	return pte;
+}
+
+/*
+ * This function checks if there is a PTE for a given dma address. If
+ * there is one, it returns the pointer to it.
+ */
+static u64 *fetch_pte(struct protection_domain *domain,
+		      unsigned long address, int map_size)
+{
+	int level;
+	u64 *pte;
+
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+
+	while (level > map_size) {
+		if (!IOMMU_PTE_PRESENT(*pte))
+			return NULL;
+
+		level -= 1;
+
+		pte = IOMMU_PTE_PAGE(*pte);
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
+
+		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
+			pte = NULL;
+			break;
+		}
+	}
+
+	return pte;
+}
+
+/*
  * Generic mapping functions. It maps a physical address into a DMA
  * address space. It allocates the page table pages if necessary.
  * In the future it can be extended to a generic mapping function
@@ -654,28 +828,6 @@
 }
 
 /*
- * Init the unity mappings for a specific IOMMU in the system
- *
- * Basically iterates over all unity mapping entries and applies them to
- * the default domain DMA of that IOMMU if necessary.
- */
-static int iommu_init_unity_mappings(struct amd_iommu *iommu)
-{
-	struct unity_map_entry *entry;
-	int ret;
-
-	list_for_each_entry(entry, &amd_iommu_unity_map, list) {
-		if (!iommu_for_unity_map(iommu, entry))
-			continue;
-		ret = dma_ops_unity_map(iommu->default_dom, entry);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-/*
  * This function actually applies the mapping to the page table of the
  * dma_ops domain.
  */
@@ -704,6 +856,28 @@
 }
 
 /*
+ * Init the unity mappings for a specific IOMMU in the system
+ *
+ * Basically iterates over all unity mapping entries and applies them to
+ * the default domain DMA of that IOMMU if necessary.
+ */
+static int iommu_init_unity_mappings(struct amd_iommu *iommu)
+{
+	struct unity_map_entry *entry;
+	int ret;
+
+	list_for_each_entry(entry, &amd_iommu_unity_map, list) {
+		if (!iommu_for_unity_map(iommu, entry))
+			continue;
+		ret = dma_ops_unity_map(iommu->default_dom, entry);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/*
  * Inits the unity mappings required for a specific device
  */
 static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
@@ -740,34 +914,23 @@
  */
 
 /*
- * This function checks if there is a PTE for a given dma address. If
- * there is one, it returns the pointer to it.
+ * Used to reserve address ranges in the aperture (e.g. for exclusion
+ * ranges.
  */
-static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address, int map_size)
+static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
+				      unsigned long start_page,
+				      unsigned int pages)
 {
-	int level;
-	u64 *pte;
+	unsigned int i, last_page = dom->aperture_size >> PAGE_SHIFT;
 
-	level =  domain->mode - 1;
-	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
+	if (start_page + pages > last_page)
+		pages = last_page - start_page;
 
-	while (level > map_size) {
-		if (!IOMMU_PTE_PRESENT(*pte))
-			return NULL;
-
-		level -= 1;
-
-		pte = IOMMU_PTE_PAGE(*pte);
-		pte = &pte[PM_LEVEL_INDEX(level, address)];
-
-		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
-			pte = NULL;
-			break;
-		}
+	for (i = start_page; i < start_page + pages; ++i) {
+		int index = i / APERTURE_RANGE_PAGES;
+		int page  = i % APERTURE_RANGE_PAGES;
+		__set_bit(page, dom->aperture[index]->bitmap);
 	}
-
-	return pte;
 }
 
 /*
@@ -775,11 +938,11 @@
  * aperture in case of dma_ops domain allocation or address allocation
  * failure.
  */
-static int alloc_new_range(struct amd_iommu *iommu,
-			   struct dma_ops_domain *dma_dom,
+static int alloc_new_range(struct dma_ops_domain *dma_dom,
 			   bool populate, gfp_t gfp)
 {
 	int index = dma_dom->aperture_size >> APERTURE_RANGE_SHIFT;
+	struct amd_iommu *iommu;
 	int i;
 
 #ifdef CONFIG_IOMMU_STRESS
@@ -819,14 +982,17 @@
 	dma_dom->aperture_size += APERTURE_RANGE_SIZE;
 
 	/* Intialize the exclusion range if necessary */
-	if (iommu->exclusion_start &&
-	    iommu->exclusion_start >= dma_dom->aperture[index]->offset &&
-	    iommu->exclusion_start < dma_dom->aperture_size) {
-		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = iommu_num_pages(iommu->exclusion_start,
-					    iommu->exclusion_length,
-					    PAGE_SIZE);
-		dma_ops_reserve_addresses(dma_dom, startpage, pages);
+	for_each_iommu(iommu) {
+		if (iommu->exclusion_start &&
+		    iommu->exclusion_start >= dma_dom->aperture[index]->offset
+		    && iommu->exclusion_start < dma_dom->aperture_size) {
+			unsigned long startpage;
+			int pages = iommu_num_pages(iommu->exclusion_start,
+						    iommu->exclusion_length,
+						    PAGE_SIZE);
+			startpage = iommu->exclusion_start >> PAGE_SHIFT;
+			dma_ops_reserve_addresses(dma_dom, startpage, pages);
+		}
 	}
 
 	/*
@@ -928,7 +1094,7 @@
 	}
 
 	if (unlikely(address == -1))
-		address = bad_dma_address;
+		address = DMA_ERROR_CODE;
 
 	WARN_ON((address + (PAGE_SIZE*pages)) > dom->aperture_size);
 
@@ -973,6 +1139,31 @@
  *
  ****************************************************************************/
 
+/*
+ * This function adds a protection domain to the global protection domain list
+ */
+static void add_domain_to_list(struct protection_domain *domain)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+	list_add(&domain->list, &amd_iommu_pd_list);
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
+}
+
+/*
+ * This function removes a protection domain to the global
+ * protection domain list
+ */
+static void del_domain_from_list(struct protection_domain *domain)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&amd_iommu_pd_lock, flags);
+	list_del(&domain->list);
+	spin_unlock_irqrestore(&amd_iommu_pd_lock, flags);
+}
+
 static u16 domain_id_alloc(void)
 {
 	unsigned long flags;
@@ -1000,26 +1191,6 @@
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
 
-/*
- * Used to reserve address ranges in the aperture (e.g. for exclusion
- * ranges.
- */
-static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
-				      unsigned long start_page,
-				      unsigned int pages)
-{
-	unsigned int i, last_page = dom->aperture_size >> PAGE_SHIFT;
-
-	if (start_page + pages > last_page)
-		pages = last_page - start_page;
-
-	for (i = start_page; i < start_page + pages; ++i) {
-		int index = i / APERTURE_RANGE_PAGES;
-		int page  = i % APERTURE_RANGE_PAGES;
-		__set_bit(page, dom->aperture[index]->bitmap);
-	}
-}
-
 static void free_pagetable(struct protection_domain *domain)
 {
 	int i, j;
@@ -1061,6 +1232,8 @@
 	if (!dom)
 		return;
 
+	del_domain_from_list(&dom->domain);
+
 	free_pagetable(&dom->domain);
 
 	for (i = 0; i < APERTURE_MAX_RANGES; ++i) {
@@ -1078,7 +1251,7 @@
  * It also intializes the page table and the address allocator data
  * structures required for the dma_ops interface
  */
-static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
+static struct dma_ops_domain *dma_ops_domain_alloc(void)
 {
 	struct dma_ops_domain *dma_dom;
 
@@ -1091,6 +1264,7 @@
 	dma_dom->domain.id = domain_id_alloc();
 	if (dma_dom->domain.id == 0)
 		goto free_dma_dom;
+	INIT_LIST_HEAD(&dma_dom->domain.dev_list);
 	dma_dom->domain.mode = PAGE_MODE_2_LEVEL;
 	dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
 	dma_dom->domain.flags = PD_DMA_OPS_MASK;
@@ -1101,7 +1275,9 @@
 	dma_dom->need_flush = false;
 	dma_dom->target_dev = 0xffff;
 
-	if (alloc_new_range(iommu, dma_dom, true, GFP_KERNEL))
+	add_domain_to_list(&dma_dom->domain);
+
+	if (alloc_new_range(dma_dom, true, GFP_KERNEL))
 		goto free_dma_dom;
 
 	/*
@@ -1129,22 +1305,6 @@
 	return domain->flags & PD_DMA_OPS_MASK;
 }
 
-/*
- * Find out the protection domain structure for a given PCI device. This
- * will give us the pointer to the page table root for example.
- */
-static struct protection_domain *domain_for_device(u16 devid)
-{
-	struct protection_domain *dom;
-	unsigned long flags;
-
-	read_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	dom = amd_iommu_pd_table[devid];
-	read_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
-
-	return dom;
-}
-
 static void set_dte_entry(u16 devid, struct protection_domain *domain)
 {
 	u64 pte_root = virt_to_phys(domain->pt_root);
@@ -1156,42 +1316,123 @@
 	amd_iommu_dev_table[devid].data[2] = domain->id;
 	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
+}
 
-	amd_iommu_pd_table[devid] = domain;
+static void clear_dte_entry(u16 devid)
+{
+	/* remove entry from the device table seen by the hardware */
+	amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
+	amd_iommu_dev_table[devid].data[1] = 0;
+	amd_iommu_dev_table[devid].data[2] = 0;
+
+	amd_iommu_apply_erratum_63(devid);
+}
+
+static void do_attach(struct device *dev, struct protection_domain *domain)
+{
+	struct iommu_dev_data *dev_data;
+	struct amd_iommu *iommu;
+	u16 devid;
+
+	devid    = get_device_id(dev);
+	iommu    = amd_iommu_rlookup_table[devid];
+	dev_data = get_dev_data(dev);
+
+	/* Update data structures */
+	dev_data->domain = domain;
+	list_add(&dev_data->list, &domain->dev_list);
+	set_dte_entry(devid, domain);
+
+	/* Do reference counting */
+	domain->dev_iommu[iommu->index] += 1;
+	domain->dev_cnt                 += 1;
+
+	/* Flush the DTE entry */
+	iommu_flush_device(dev);
+}
+
+static void do_detach(struct device *dev)
+{
+	struct iommu_dev_data *dev_data;
+	struct amd_iommu *iommu;
+	u16 devid;
+
+	devid    = get_device_id(dev);
+	iommu    = amd_iommu_rlookup_table[devid];
+	dev_data = get_dev_data(dev);
+
+	/* decrease reference counters */
+	dev_data->domain->dev_iommu[iommu->index] -= 1;
+	dev_data->domain->dev_cnt                 -= 1;
+
+	/* Update data structures */
+	dev_data->domain = NULL;
+	list_del(&dev_data->list);
+	clear_dte_entry(devid);
+
+	/* Flush the DTE entry */
+	iommu_flush_device(dev);
 }
 
 /*
  * If a device is not yet associated with a domain, this function does
  * assigns it visible for the hardware
  */
-static void __attach_device(struct amd_iommu *iommu,
-			    struct protection_domain *domain,
-			    u16 devid)
+static int __attach_device(struct device *dev,
+			   struct protection_domain *domain)
 {
+	struct iommu_dev_data *dev_data, *alias_data;
+
+	dev_data   = get_dev_data(dev);
+	alias_data = get_dev_data(dev_data->alias);
+
+	if (!alias_data)
+		return -EINVAL;
+
 	/* lock domain */
 	spin_lock(&domain->lock);
 
-	/* update DTE entry */
-	set_dte_entry(devid, domain);
+	/* Some sanity checks */
+	if (alias_data->domain != NULL &&
+	    alias_data->domain != domain)
+		return -EBUSY;
 
-	domain->dev_cnt += 1;
+	if (dev_data->domain != NULL &&
+	    dev_data->domain != domain)
+		return -EBUSY;
+
+	/* Do real assignment */
+	if (dev_data->alias != dev) {
+		alias_data = get_dev_data(dev_data->alias);
+		if (alias_data->domain == NULL)
+			do_attach(dev_data->alias, domain);
+
+		atomic_inc(&alias_data->bind);
+	}
+
+	if (dev_data->domain == NULL)
+		do_attach(dev, domain);
+
+	atomic_inc(&dev_data->bind);
 
 	/* ready */
 	spin_unlock(&domain->lock);
+
+	return 0;
 }
 
 /*
  * If a device is not yet associated with a domain, this function does
  * assigns it visible for the hardware
  */
-static void attach_device(struct amd_iommu *iommu,
-			  struct protection_domain *domain,
-			  u16 devid)
+static int attach_device(struct device *dev,
+			 struct protection_domain *domain)
 {
 	unsigned long flags;
+	int ret;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	__attach_device(iommu, domain, devid);
+	ret = __attach_device(dev, domain);
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
 	/*
@@ -1199,98 +1440,125 @@
 	 * left the caches in the IOMMU dirty. So we have to flush
 	 * here to evict all dirty stuff.
 	 */
-	iommu_queue_inv_dev_entry(iommu, devid);
-	iommu_flush_tlb_pde(iommu, domain->id);
+	iommu_flush_tlb_pde(domain);
+
+	return ret;
 }
 
 /*
  * Removes a device from a protection domain (unlocked)
  */
-static void __detach_device(struct protection_domain *domain, u16 devid)
+static void __detach_device(struct device *dev)
 {
+	struct iommu_dev_data *dev_data = get_dev_data(dev);
+	struct iommu_dev_data *alias_data;
+	unsigned long flags;
 
-	/* lock domain */
-	spin_lock(&domain->lock);
+	BUG_ON(!dev_data->domain);
 
-	/* remove domain from the lookup table */
-	amd_iommu_pd_table[devid] = NULL;
+	spin_lock_irqsave(&dev_data->domain->lock, flags);
 
-	/* remove entry from the device table seen by the hardware */
-	amd_iommu_dev_table[devid].data[0] = IOMMU_PTE_P | IOMMU_PTE_TV;
-	amd_iommu_dev_table[devid].data[1] = 0;
-	amd_iommu_dev_table[devid].data[2] = 0;
+	if (dev_data->alias != dev) {
+		alias_data = get_dev_data(dev_data->alias);
+		if (atomic_dec_and_test(&alias_data->bind))
+			do_detach(dev_data->alias);
+	}
 
-	amd_iommu_apply_erratum_63(devid);
+	if (atomic_dec_and_test(&dev_data->bind))
+		do_detach(dev);
 
-	/* decrease reference counter */
-	domain->dev_cnt -= 1;
-
-	/* ready */
-	spin_unlock(&domain->lock);
+	spin_unlock_irqrestore(&dev_data->domain->lock, flags);
 
 	/*
 	 * If we run in passthrough mode the device must be assigned to the
 	 * passthrough domain if it is detached from any other domain
 	 */
-	if (iommu_pass_through) {
-		struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
-		__attach_device(iommu, pt_domain, devid);
-	}
+	if (iommu_pass_through && dev_data->domain == NULL)
+		__attach_device(dev, pt_domain);
 }
 
 /*
  * Removes a device from a protection domain (with devtable_lock held)
  */
-static void detach_device(struct protection_domain *domain, u16 devid)
+static void detach_device(struct device *dev)
 {
 	unsigned long flags;
 
 	/* lock device table */
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	__detach_device(domain, devid);
+	__detach_device(dev);
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
 
+/*
+ * Find out the protection domain structure for a given PCI device. This
+ * will give us the pointer to the page table root for example.
+ */
+static struct protection_domain *domain_for_device(struct device *dev)
+{
+	struct protection_domain *dom;
+	struct iommu_dev_data *dev_data, *alias_data;
+	unsigned long flags;
+	u16 devid, alias;
+
+	devid      = get_device_id(dev);
+	alias      = amd_iommu_alias_table[devid];
+	dev_data   = get_dev_data(dev);
+	alias_data = get_dev_data(dev_data->alias);
+	if (!alias_data)
+		return NULL;
+
+	read_lock_irqsave(&amd_iommu_devtable_lock, flags);
+	dom = dev_data->domain;
+	if (dom == NULL &&
+	    alias_data->domain != NULL) {
+		__attach_device(dev, alias_data->domain);
+		dom = alias_data->domain;
+	}
+
+	read_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	return dom;
+}
+
 static int device_change_notifier(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
 	struct device *dev = data;
-	struct pci_dev *pdev = to_pci_dev(dev);
-	u16 devid = calc_devid(pdev->bus->number, pdev->devfn);
+	u16 devid;
 	struct protection_domain *domain;
 	struct dma_ops_domain *dma_domain;
 	struct amd_iommu *iommu;
 	unsigned long flags;
 
-	if (devid > amd_iommu_last_bdf)
-		goto out;
+	if (!check_device(dev))
+		return 0;
 
-	devid = amd_iommu_alias_table[devid];
-
-	iommu = amd_iommu_rlookup_table[devid];
-	if (iommu == NULL)
-		goto out;
-
-	domain = domain_for_device(devid);
-
-	if (domain && !dma_ops_domain(domain))
-		WARN_ONCE(1, "AMD IOMMU WARNING: device %s already bound "
-			  "to a non-dma-ops domain\n", dev_name(dev));
+	devid  = get_device_id(dev);
+	iommu  = amd_iommu_rlookup_table[devid];
 
 	switch (action) {
 	case BUS_NOTIFY_UNBOUND_DRIVER:
+
+		domain = domain_for_device(dev);
+
 		if (!domain)
 			goto out;
 		if (iommu_pass_through)
 			break;
-		detach_device(domain, devid);
+		detach_device(dev);
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
+
+		iommu_init_device(dev);
+
+		domain = domain_for_device(dev);
+
 		/* allocate a protection domain if a device is added */
 		dma_domain = find_protection_domain(devid);
 		if (dma_domain)
 			goto out;
-		dma_domain = dma_ops_domain_alloc(iommu);
+		dma_domain = dma_ops_domain_alloc();
 		if (!dma_domain)
 			goto out;
 		dma_domain->target_dev = devid;
@@ -1300,11 +1568,15 @@
 		spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
 
 		break;
+	case BUS_NOTIFY_DEL_DEVICE:
+
+		iommu_uninit_device(dev);
+
 	default:
 		goto out;
 	}
 
-	iommu_queue_inv_dev_entry(iommu, devid);
+	iommu_flush_device(dev);
 	iommu_completion_wait(iommu);
 
 out:
@@ -1322,106 +1594,46 @@
  *****************************************************************************/
 
 /*
- * This function checks if the driver got a valid device from the caller to
- * avoid dereferencing invalid pointers.
- */
-static bool check_device(struct device *dev)
-{
-	if (!dev || !dev->dma_mask)
-		return false;
-
-	return true;
-}
-
-/*
- * In this function the list of preallocated protection domains is traversed to
- * find the domain for a specific device
- */
-static struct dma_ops_domain *find_protection_domain(u16 devid)
-{
-	struct dma_ops_domain *entry, *ret = NULL;
-	unsigned long flags;
-
-	if (list_empty(&iommu_pd_list))
-		return NULL;
-
-	spin_lock_irqsave(&iommu_pd_list_lock, flags);
-
-	list_for_each_entry(entry, &iommu_pd_list, list) {
-		if (entry->target_dev == devid) {
-			ret = entry;
-			break;
-		}
-	}
-
-	spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
-
-	return ret;
-}
-
-/*
  * In the dma_ops path we only have the struct device. This function
  * finds the corresponding IOMMU, the protection domain and the
  * requestor id for a given device.
  * If the device is not yet associated with a domain this is also done
  * in this function.
  */
-static int get_device_resources(struct device *dev,
-				struct amd_iommu **iommu,
-				struct protection_domain **domain,
-				u16 *bdf)
+static struct protection_domain *get_domain(struct device *dev)
 {
+	struct protection_domain *domain;
 	struct dma_ops_domain *dma_dom;
-	struct pci_dev *pcidev;
-	u16 _bdf;
+	u16 devid = get_device_id(dev);
 
-	*iommu = NULL;
-	*domain = NULL;
-	*bdf = 0xffff;
+	if (!check_device(dev))
+		return ERR_PTR(-EINVAL);
 
-	if (dev->bus != &pci_bus_type)
-		return 0;
+	domain = domain_for_device(dev);
+	if (domain != NULL && !dma_ops_domain(domain))
+		return ERR_PTR(-EBUSY);
 
-	pcidev = to_pci_dev(dev);
-	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
+	if (domain != NULL)
+		return domain;
 
-	/* device not translated by any IOMMU in the system? */
-	if (_bdf > amd_iommu_last_bdf)
-		return 0;
+	/* Device not bount yet - bind it */
+	dma_dom = find_protection_domain(devid);
+	if (!dma_dom)
+		dma_dom = amd_iommu_rlookup_table[devid]->default_dom;
+	attach_device(dev, &dma_dom->domain);
+	DUMP_printk("Using protection domain %d for device %s\n",
+		    dma_dom->domain.id, dev_name(dev));
 
-	*bdf = amd_iommu_alias_table[_bdf];
-
-	*iommu = amd_iommu_rlookup_table[*bdf];
-	if (*iommu == NULL)
-		return 0;
-	*domain = domain_for_device(*bdf);
-	if (*domain == NULL) {
-		dma_dom = find_protection_domain(*bdf);
-		if (!dma_dom)
-			dma_dom = (*iommu)->default_dom;
-		*domain = &dma_dom->domain;
-		attach_device(*iommu, *domain, *bdf);
-		DUMP_printk("Using protection domain %d for device %s\n",
-			    (*domain)->id, dev_name(dev));
-	}
-
-	if (domain_for_device(_bdf) == NULL)
-		attach_device(*iommu, *domain, _bdf);
-
-	return 1;
+	return &dma_dom->domain;
 }
 
 static void update_device_table(struct protection_domain *domain)
 {
-	unsigned long flags;
-	int i;
+	struct iommu_dev_data *dev_data;
 
-	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (amd_iommu_pd_table[i] != domain)
-			continue;
-		write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-		set_dte_entry(i, domain);
-		write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+	list_for_each_entry(dev_data, &domain->dev_list, list) {
+		u16 devid = get_device_id(dev_data->dev);
+		set_dte_entry(devid, domain);
 	}
 }
 
@@ -1431,76 +1643,13 @@
 		return;
 
 	update_device_table(domain);
-	flush_devices_by_domain(domain);
-	iommu_flush_domain(domain->id);
+	iommu_flush_domain_devices(domain);
+	iommu_flush_tlb_pde(domain);
 
 	domain->updated = false;
 }
 
 /*
- * This function is used to add another level to an IO page table. Adding
- * another level increases the size of the address space by 9 bits to a size up
- * to 64 bits.
- */
-static bool increase_address_space(struct protection_domain *domain,
-				   gfp_t gfp)
-{
-	u64 *pte;
-
-	if (domain->mode == PAGE_MODE_6_LEVEL)
-		/* address space already 64 bit large */
-		return false;
-
-	pte = (void *)get_zeroed_page(gfp);
-	if (!pte)
-		return false;
-
-	*pte             = PM_LEVEL_PDE(domain->mode,
-					virt_to_phys(domain->pt_root));
-	domain->pt_root  = pte;
-	domain->mode    += 1;
-	domain->updated  = true;
-
-	return true;
-}
-
-static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address,
-		      int end_lvl,
-		      u64 **pte_page,
-		      gfp_t gfp)
-{
-	u64 *pte, *page;
-	int level;
-
-	while (address > PM_LEVEL_SIZE(domain->mode))
-		increase_address_space(domain, gfp);
-
-	level =  domain->mode - 1;
-	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
-
-	while (level > end_lvl) {
-		if (!IOMMU_PTE_PRESENT(*pte)) {
-			page = (u64 *)get_zeroed_page(gfp);
-			if (!page)
-				return NULL;
-			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
-		}
-
-		level -= 1;
-
-		pte = IOMMU_PTE_PAGE(*pte);
-
-		if (pte_page && level == end_lvl)
-			*pte_page = pte;
-
-		pte = &pte[PM_LEVEL_INDEX(level, address)];
-	}
-
-	return pte;
-}
-
-/*
  * This function fetches the PTE for a given address in the aperture
  */
 static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
@@ -1530,8 +1679,7 @@
  * This is the generic map function. It maps one 4kb page at paddr to
  * the given address in the DMA address space for the domain.
  */
-static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
-				     struct dma_ops_domain *dom,
+static dma_addr_t dma_ops_domain_map(struct dma_ops_domain *dom,
 				     unsigned long address,
 				     phys_addr_t paddr,
 				     int direction)
@@ -1544,7 +1692,7 @@
 
 	pte  = dma_ops_get_pte(dom, address);
 	if (!pte)
-		return bad_dma_address;
+		return DMA_ERROR_CODE;
 
 	__pte = paddr | IOMMU_PTE_P | IOMMU_PTE_FC;
 
@@ -1565,8 +1713,7 @@
 /*
  * The generic unmapping function for on page in the DMA address space.
  */
-static void dma_ops_domain_unmap(struct amd_iommu *iommu,
-				 struct dma_ops_domain *dom,
+static void dma_ops_domain_unmap(struct dma_ops_domain *dom,
 				 unsigned long address)
 {
 	struct aperture_range *aperture;
@@ -1597,7 +1744,6 @@
  * Must be called with the domain lock held.
  */
 static dma_addr_t __map_single(struct device *dev,
-			       struct amd_iommu *iommu,
 			       struct dma_ops_domain *dma_dom,
 			       phys_addr_t paddr,
 			       size_t size,
@@ -1625,7 +1771,7 @@
 retry:
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages, align_mask,
 					  dma_mask);
-	if (unlikely(address == bad_dma_address)) {
+	if (unlikely(address == DMA_ERROR_CODE)) {
 		/*
 		 * setting next_address here will let the address
 		 * allocator only scan the new allocated range in the
@@ -1633,7 +1779,7 @@
 		 */
 		dma_dom->next_address = dma_dom->aperture_size;
 
-		if (alloc_new_range(iommu, dma_dom, false, GFP_ATOMIC))
+		if (alloc_new_range(dma_dom, false, GFP_ATOMIC))
 			goto out;
 
 		/*
@@ -1645,8 +1791,8 @@
 
 	start = address;
 	for (i = 0; i < pages; ++i) {
-		ret = dma_ops_domain_map(iommu, dma_dom, start, paddr, dir);
-		if (ret == bad_dma_address)
+		ret = dma_ops_domain_map(dma_dom, start, paddr, dir);
+		if (ret == DMA_ERROR_CODE)
 			goto out_unmap;
 
 		paddr += PAGE_SIZE;
@@ -1657,10 +1803,10 @@
 	ADD_STATS_COUNTER(alloced_io_mem, size);
 
 	if (unlikely(dma_dom->need_flush && !amd_iommu_unmap_flush)) {
-		iommu_flush_tlb(iommu, dma_dom->domain.id);
+		iommu_flush_tlb(&dma_dom->domain);
 		dma_dom->need_flush = false;
-	} else if (unlikely(iommu_has_npcache(iommu)))
-		iommu_flush_pages(iommu, dma_dom->domain.id, address, size);
+	} else if (unlikely(amd_iommu_np_cache))
+		iommu_flush_pages(&dma_dom->domain, address, size);
 
 out:
 	return address;
@@ -1669,20 +1815,19 @@
 
 	for (--i; i >= 0; --i) {
 		start -= PAGE_SIZE;
-		dma_ops_domain_unmap(iommu, dma_dom, start);
+		dma_ops_domain_unmap(dma_dom, start);
 	}
 
 	dma_ops_free_addresses(dma_dom, address, pages);
 
-	return bad_dma_address;
+	return DMA_ERROR_CODE;
 }
 
 /*
  * Does the reverse of the __map_single function. Must be called with
  * the domain lock held too
  */
-static void __unmap_single(struct amd_iommu *iommu,
-			   struct dma_ops_domain *dma_dom,
+static void __unmap_single(struct dma_ops_domain *dma_dom,
 			   dma_addr_t dma_addr,
 			   size_t size,
 			   int dir)
@@ -1690,7 +1835,7 @@
 	dma_addr_t i, start;
 	unsigned int pages;
 
-	if ((dma_addr == bad_dma_address) ||
+	if ((dma_addr == DMA_ERROR_CODE) ||
 	    (dma_addr + size > dma_dom->aperture_size))
 		return;
 
@@ -1699,7 +1844,7 @@
 	start = dma_addr;
 
 	for (i = 0; i < pages; ++i) {
-		dma_ops_domain_unmap(iommu, dma_dom, start);
+		dma_ops_domain_unmap(dma_dom, start);
 		start += PAGE_SIZE;
 	}
 
@@ -1708,7 +1853,7 @@
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
 
 	if (amd_iommu_unmap_flush || dma_dom->need_flush) {
-		iommu_flush_pages(iommu, dma_dom->domain.id, dma_addr, size);
+		iommu_flush_pages(&dma_dom->domain, dma_addr, size);
 		dma_dom->need_flush = false;
 	}
 }
@@ -1722,36 +1867,29 @@
 			   struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 	dma_addr_t addr;
 	u64 dma_mask;
 	phys_addr_t paddr = page_to_phys(page) + offset;
 
 	INC_STATS_COUNTER(cnt_map_single);
 
-	if (!check_device(dev))
-		return bad_dma_address;
+	domain = get_domain(dev);
+	if (PTR_ERR(domain) == -EINVAL)
+		return (dma_addr_t)paddr;
+	else if (IS_ERR(domain))
+		return DMA_ERROR_CODE;
 
 	dma_mask = *dev->dma_mask;
 
-	get_device_resources(dev, &iommu, &domain, &devid);
-
-	if (iommu == NULL || domain == NULL)
-		/* device not handled by any AMD IOMMU */
-		return (dma_addr_t)paddr;
-
-	if (!dma_ops_domain(domain))
-		return bad_dma_address;
-
 	spin_lock_irqsave(&domain->lock, flags);
-	addr = __map_single(dev, iommu, domain->priv, paddr, size, dir, false,
+
+	addr = __map_single(dev, domain->priv, paddr, size, dir, false,
 			    dma_mask);
-	if (addr == bad_dma_address)
+	if (addr == DMA_ERROR_CODE)
 		goto out;
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1766,25 +1904,19 @@
 		       enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 
 	INC_STATS_COUNTER(cnt_unmap_single);
 
-	if (!check_device(dev) ||
-	    !get_device_resources(dev, &iommu, &domain, &devid))
-		/* device not handled by any AMD IOMMU */
-		return;
-
-	if (!dma_ops_domain(domain))
+	domain = get_domain(dev);
+	if (IS_ERR(domain))
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
-	__unmap_single(iommu, domain->priv, dma_addr, size, dir);
+	__unmap_single(domain->priv, dma_addr, size, dir);
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1816,9 +1948,7 @@
 		  struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 	int i;
 	struct scatterlist *s;
 	phys_addr_t paddr;
@@ -1827,25 +1957,20 @@
 
 	INC_STATS_COUNTER(cnt_map_sg);
 
-	if (!check_device(dev))
+	domain = get_domain(dev);
+	if (PTR_ERR(domain) == -EINVAL)
+		return map_sg_no_iommu(dev, sglist, nelems, dir);
+	else if (IS_ERR(domain))
 		return 0;
 
 	dma_mask = *dev->dma_mask;
 
-	get_device_resources(dev, &iommu, &domain, &devid);
-
-	if (!iommu || !domain)
-		return map_sg_no_iommu(dev, sglist, nelems, dir);
-
-	if (!dma_ops_domain(domain))
-		return 0;
-
 	spin_lock_irqsave(&domain->lock, flags);
 
 	for_each_sg(sglist, s, nelems, i) {
 		paddr = sg_phys(s);
 
-		s->dma_address = __map_single(dev, iommu, domain->priv,
+		s->dma_address = __map_single(dev, domain->priv,
 					      paddr, s->length, dir, false,
 					      dma_mask);
 
@@ -1856,7 +1981,7 @@
 			goto unmap;
 	}
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 out:
 	spin_unlock_irqrestore(&domain->lock, flags);
@@ -1865,7 +1990,7 @@
 unmap:
 	for_each_sg(sglist, s, mapped_elems, i) {
 		if (s->dma_address)
-			__unmap_single(iommu, domain->priv, s->dma_address,
+			__unmap_single(domain->priv, s->dma_address,
 				       s->dma_length, dir);
 		s->dma_address = s->dma_length = 0;
 	}
@@ -1884,30 +2009,25 @@
 		     struct dma_attrs *attrs)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
 	struct scatterlist *s;
-	u16 devid;
 	int i;
 
 	INC_STATS_COUNTER(cnt_unmap_sg);
 
-	if (!check_device(dev) ||
-	    !get_device_resources(dev, &iommu, &domain, &devid))
-		return;
-
-	if (!dma_ops_domain(domain))
+	domain = get_domain(dev);
+	if (IS_ERR(domain))
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
 	for_each_sg(sglist, s, nelems, i) {
-		__unmap_single(iommu, domain->priv, s->dma_address,
+		__unmap_single(domain->priv, s->dma_address,
 			       s->dma_length, dir);
 		s->dma_address = s->dma_length = 0;
 	}
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
@@ -1920,49 +2040,44 @@
 {
 	unsigned long flags;
 	void *virt_addr;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 	phys_addr_t paddr;
 	u64 dma_mask = dev->coherent_dma_mask;
 
 	INC_STATS_COUNTER(cnt_alloc_coherent);
 
-	if (!check_device(dev))
+	domain = get_domain(dev);
+	if (PTR_ERR(domain) == -EINVAL) {
+		virt_addr = (void *)__get_free_pages(flag, get_order(size));
+		*dma_addr = __pa(virt_addr);
+		return virt_addr;
+	} else if (IS_ERR(domain))
 		return NULL;
 
-	if (!get_device_resources(dev, &iommu, &domain, &devid))
-		flag &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+	dma_mask  = dev->coherent_dma_mask;
+	flag     &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+	flag     |= __GFP_ZERO;
 
-	flag |= __GFP_ZERO;
 	virt_addr = (void *)__get_free_pages(flag, get_order(size));
 	if (!virt_addr)
 		return NULL;
 
 	paddr = virt_to_phys(virt_addr);
 
-	if (!iommu || !domain) {
-		*dma_addr = (dma_addr_t)paddr;
-		return virt_addr;
-	}
-
-	if (!dma_ops_domain(domain))
-		goto out_free;
-
 	if (!dma_mask)
 		dma_mask = *dev->dma_mask;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
-	*dma_addr = __map_single(dev, iommu, domain->priv, paddr,
+	*dma_addr = __map_single(dev, domain->priv, paddr,
 				 size, DMA_BIDIRECTIONAL, true, dma_mask);
 
-	if (*dma_addr == bad_dma_address) {
+	if (*dma_addr == DMA_ERROR_CODE) {
 		spin_unlock_irqrestore(&domain->lock, flags);
 		goto out_free;
 	}
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
@@ -1982,28 +2097,19 @@
 			  void *virt_addr, dma_addr_t dma_addr)
 {
 	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct protection_domain *domain;
-	u16 devid;
 
 	INC_STATS_COUNTER(cnt_free_coherent);
 
-	if (!check_device(dev))
-		return;
-
-	get_device_resources(dev, &iommu, &domain, &devid);
-
-	if (!iommu || !domain)
-		goto free_mem;
-
-	if (!dma_ops_domain(domain))
+	domain = get_domain(dev);
+	if (IS_ERR(domain))
 		goto free_mem;
 
 	spin_lock_irqsave(&domain->lock, flags);
 
-	__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
+	__unmap_single(domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
 
-	iommu_completion_wait(iommu);
+	iommu_flush_complete(domain);
 
 	spin_unlock_irqrestore(&domain->lock, flags);
 
@@ -2017,22 +2123,7 @@
  */
 static int amd_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	u16 bdf;
-	struct pci_dev *pcidev;
-
-	/* No device or no PCI device */
-	if (!dev || dev->bus != &pci_bus_type)
-		return 0;
-
-	pcidev = to_pci_dev(dev);
-
-	bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
-
-	/* Out of our scope? */
-	if (bdf > amd_iommu_last_bdf)
-		return 0;
-
-	return 1;
+	return check_device(dev);
 }
 
 /*
@@ -2046,25 +2137,30 @@
 {
 	struct pci_dev *dev = NULL;
 	struct dma_ops_domain *dma_dom;
-	struct amd_iommu *iommu;
 	u16 devid;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		devid = calc_devid(dev->bus->number, dev->devfn);
-		if (devid > amd_iommu_last_bdf)
+
+		/* Do we handle this device? */
+		if (!check_device(&dev->dev))
 			continue;
-		devid = amd_iommu_alias_table[devid];
-		if (domain_for_device(devid))
+
+		iommu_init_device(&dev->dev);
+
+		/* Is there already any domain for it? */
+		if (domain_for_device(&dev->dev))
 			continue;
-		iommu = amd_iommu_rlookup_table[devid];
-		if (!iommu)
-			continue;
-		dma_dom = dma_ops_domain_alloc(iommu);
+
+		devid = get_device_id(&dev->dev);
+
+		dma_dom = dma_ops_domain_alloc();
 		if (!dma_dom)
 			continue;
 		init_unity_mappings_for_device(dma_dom, devid);
 		dma_dom->target_dev = devid;
 
+		attach_device(&dev->dev, &dma_dom->domain);
+
 		list_add_tail(&dma_dom->list, &iommu_pd_list);
 	}
 }
@@ -2093,7 +2189,7 @@
 	 * protection domain will be assigned to the default one.
 	 */
 	for_each_iommu(iommu) {
-		iommu->default_dom = dma_ops_domain_alloc(iommu);
+		iommu->default_dom = dma_ops_domain_alloc();
 		if (iommu->default_dom == NULL)
 			return -ENOMEM;
 		iommu->default_dom->domain.flags |= PD_DEFAULT_MASK;
@@ -2103,15 +2199,12 @@
 	}
 
 	/*
-	 * If device isolation is enabled, pre-allocate the protection
-	 * domains for each device.
+	 * Pre-allocate the protection domains for each device.
 	 */
-	if (amd_iommu_isolate)
-		prealloc_protection_domains();
+	prealloc_protection_domains();
 
 	iommu_detected = 1;
-	force_iommu = 1;
-	bad_dma_address = 0;
+	swiotlb = 0;
 #ifdef CONFIG_GART_IOMMU
 	gart_iommu_aperture_disabled = 1;
 	gart_iommu_aperture = 0;
@@ -2150,14 +2243,17 @@
 
 static void cleanup_domain(struct protection_domain *domain)
 {
+	struct iommu_dev_data *dev_data, *next;
 	unsigned long flags;
-	u16 devid;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 
-	for (devid = 0; devid <= amd_iommu_last_bdf; ++devid)
-		if (amd_iommu_pd_table[devid] == domain)
-			__detach_device(domain, devid);
+	list_for_each_entry_safe(dev_data, next, &domain->dev_list, list) {
+		struct device *dev = dev_data->dev;
+
+		do_detach(dev);
+		atomic_set(&dev_data->bind, 0);
+	}
 
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
@@ -2167,6 +2263,8 @@
 	if (!domain)
 		return;
 
+	del_domain_from_list(domain);
+
 	if (domain->id)
 		domain_id_free(domain->id);
 
@@ -2185,6 +2283,9 @@
 	domain->id = domain_id_alloc();
 	if (!domain->id)
 		goto out_err;
+	INIT_LIST_HEAD(&domain->dev_list);
+
+	add_domain_to_list(domain);
 
 	return domain;
 
@@ -2241,26 +2342,23 @@
 static void amd_iommu_detach_device(struct iommu_domain *dom,
 				    struct device *dev)
 {
-	struct protection_domain *domain = dom->priv;
+	struct iommu_dev_data *dev_data = dev->archdata.iommu;
 	struct amd_iommu *iommu;
-	struct pci_dev *pdev;
 	u16 devid;
 
-	if (dev->bus != &pci_bus_type)
+	if (!check_device(dev))
 		return;
 
-	pdev = to_pci_dev(dev);
+	devid = get_device_id(dev);
 
-	devid = calc_devid(pdev->bus->number, pdev->devfn);
-
-	if (devid > 0)
-		detach_device(domain, devid);
+	if (dev_data->domain != NULL)
+		detach_device(dev);
 
 	iommu = amd_iommu_rlookup_table[devid];
 	if (!iommu)
 		return;
 
-	iommu_queue_inv_dev_entry(iommu, devid);
+	iommu_flush_device(dev);
 	iommu_completion_wait(iommu);
 }
 
@@ -2268,35 +2366,30 @@
 				   struct device *dev)
 {
 	struct protection_domain *domain = dom->priv;
-	struct protection_domain *old_domain;
+	struct iommu_dev_data *dev_data;
 	struct amd_iommu *iommu;
-	struct pci_dev *pdev;
+	int ret;
 	u16 devid;
 
-	if (dev->bus != &pci_bus_type)
+	if (!check_device(dev))
 		return -EINVAL;
 
-	pdev = to_pci_dev(dev);
+	dev_data = dev->archdata.iommu;
 
-	devid = calc_devid(pdev->bus->number, pdev->devfn);
-
-	if (devid >= amd_iommu_last_bdf ||
-			devid != amd_iommu_alias_table[devid])
-		return -EINVAL;
+	devid = get_device_id(dev);
 
 	iommu = amd_iommu_rlookup_table[devid];
 	if (!iommu)
 		return -EINVAL;
 
-	old_domain = domain_for_device(devid);
-	if (old_domain)
-		detach_device(old_domain, devid);
+	if (dev_data->domain)
+		detach_device(dev);
 
-	attach_device(iommu, domain, devid);
+	ret = attach_device(dev, domain);
 
 	iommu_completion_wait(iommu);
 
-	return 0;
+	return ret;
 }
 
 static int amd_iommu_map_range(struct iommu_domain *dom,
@@ -2342,7 +2435,7 @@
 		iova  += PAGE_SIZE;
 	}
 
-	iommu_flush_domain(domain->id);
+	iommu_flush_tlb_pde(domain);
 }
 
 static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
@@ -2393,8 +2486,9 @@
 
 int __init amd_iommu_init_passthrough(void)
 {
+	struct amd_iommu *iommu;
 	struct pci_dev *dev = NULL;
-	u16 devid, devid2;
+	u16 devid;
 
 	/* allocate passthroug domain */
 	pt_domain = protection_domain_alloc();
@@ -2404,20 +2498,17 @@
 	pt_domain->mode |= PAGE_MODE_NONE;
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		struct amd_iommu *iommu;
 
-		devid = calc_devid(dev->bus->number, dev->devfn);
-		if (devid > amd_iommu_last_bdf)
+		if (!check_device(&dev->dev))
 			continue;
 
-		devid2 = amd_iommu_alias_table[devid];
+		devid = get_device_id(&dev->dev);
 
-		iommu = amd_iommu_rlookup_table[devid2];
+		iommu = amd_iommu_rlookup_table[devid];
 		if (!iommu)
 			continue;
 
-		__attach_device(iommu, pt_domain, devid);
-		__attach_device(iommu, pt_domain, devid2);
+		attach_device(&dev->dev, pt_domain);
 	}
 
 	pr_info("AMD-Vi: Initialized for Passthrough Mode\n");
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c20001e..7ffc399 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
+ * Copyright (C) 2007-2009 Advanced Micro Devices, Inc.
  * Author: Joerg Roedel <joerg.roedel@amd.com>
  *         Leo Duran <leo.duran@amd.com>
  *
@@ -25,10 +25,12 @@
 #include <linux/interrupt.h>
 #include <linux/msi.h>
 #include <asm/pci-direct.h>
+#include <asm/amd_iommu_proto.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
+#include <asm/x86_init.h>
 
 /*
  * definitions for the ACPI scanning code
@@ -123,18 +125,24 @@
 					   to handle */
 LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
 					   we find in ACPI */
-#ifdef CONFIG_IOMMU_STRESS
-bool amd_iommu_isolate = false;
-#else
-bool amd_iommu_isolate = true;		/* if true, device isolation is
-					   enabled */
-#endif
-
 bool amd_iommu_unmap_flush;		/* if true, flush on every unmap */
 
 LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
 					   system */
 
+/* Array to assign indices to IOMMUs*/
+struct amd_iommu *amd_iommus[MAX_IOMMUS];
+int amd_iommus_present;
+
+/* IOMMUs have a non-present cache? */
+bool amd_iommu_np_cache __read_mostly;
+
+/*
+ * List of protection domains - used during resume
+ */
+LIST_HEAD(amd_iommu_pd_list);
+spinlock_t amd_iommu_pd_lock;
+
 /*
  * Pointer to the device table which is shared by all AMD IOMMUs
  * it is indexed by the PCI device id or the HT unit id and contains
@@ -157,12 +165,6 @@
 struct amd_iommu **amd_iommu_rlookup_table;
 
 /*
- * The pd table (protection domain table) is used to find the protection domain
- * data structure a device belongs to. Indexed with the PCI device id too.
- */
-struct protection_domain **amd_iommu_pd_table;
-
-/*
  * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
  * to know which ones are already in use.
  */
@@ -838,7 +840,18 @@
 static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 {
 	spin_lock_init(&iommu->lock);
+
+	/* Add IOMMU to internal data structures */
 	list_add_tail(&iommu->list, &amd_iommu_list);
+	iommu->index             = amd_iommus_present++;
+
+	if (unlikely(iommu->index >= MAX_IOMMUS)) {
+		WARN(1, "AMD-Vi: System has more IOMMUs than supported by this driver\n");
+		return -ENOSYS;
+	}
+
+	/* Index is fine - add IOMMU to the array */
+	amd_iommus[iommu->index] = iommu;
 
 	/*
 	 * Copy data from ACPI table entry to the iommu struct
@@ -868,6 +881,9 @@
 	init_iommu_from_acpi(iommu, h);
 	init_iommu_devices(iommu);
 
+	if (iommu->cap & (1UL << IOMMU_CAP_NPCACHE))
+		amd_iommu_np_cache = true;
+
 	return pci_enable_device(iommu->dev);
 }
 
@@ -925,7 +941,7 @@
  *
  ****************************************************************************/
 
-static int __init iommu_setup_msi(struct amd_iommu *iommu)
+static int iommu_setup_msi(struct amd_iommu *iommu)
 {
 	int r;
 
@@ -1176,19 +1192,10 @@
  * functions. Finally it prints some information about AMD IOMMUs and
  * the driver state and enables the hardware.
  */
-int __init amd_iommu_init(void)
+static int __init amd_iommu_init(void)
 {
 	int i, ret = 0;
 
-
-	if (no_iommu) {
-		printk(KERN_INFO "AMD-Vi disabled by kernel command line\n");
-		return 0;
-	}
-
-	if (!amd_iommu_detected)
-		return -ENODEV;
-
 	/*
 	 * First parse ACPI tables to find the largest Bus/Dev/Func
 	 * we need to handle. Upon this information the shared data
@@ -1225,15 +1232,6 @@
 	if (amd_iommu_rlookup_table == NULL)
 		goto free;
 
-	/*
-	 * Protection Domain table - maps devices to protection domains
-	 * This table has the same size as the rlookup_table
-	 */
-	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
-				     get_order(rlookup_table_size));
-	if (amd_iommu_pd_table == NULL)
-		goto free;
-
 	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
 					    GFP_KERNEL | __GFP_ZERO,
 					    get_order(MAX_DOMAIN_ID/8));
@@ -1255,6 +1253,8 @@
 	 */
 	amd_iommu_pd_alloc_bitmap[0] = 1;
 
+	spin_lock_init(&amd_iommu_pd_lock);
+
 	/*
 	 * now the data structures are allocated and basically initialized
 	 * start the real acpi table scan
@@ -1286,17 +1286,12 @@
 	if (iommu_pass_through)
 		goto out;
 
-	printk(KERN_INFO "AMD-Vi: device isolation ");
-	if (amd_iommu_isolate)
-		printk("enabled\n");
-	else
-		printk("disabled\n");
-
 	if (amd_iommu_unmap_flush)
 		printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
 	else
 		printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
 
+	x86_platform.iommu_shutdown = disable_iommus;
 out:
 	return ret;
 
@@ -1304,9 +1299,6 @@
 	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
 		   get_order(MAX_DOMAIN_ID/8));
 
-	free_pages((unsigned long)amd_iommu_pd_table,
-		   get_order(rlookup_table_size));
-
 	free_pages((unsigned long)amd_iommu_rlookup_table,
 		   get_order(rlookup_table_size));
 
@@ -1323,11 +1315,6 @@
 	goto out;
 }
 
-void amd_iommu_shutdown(void)
-{
-	disable_iommus();
-}
-
 /****************************************************************************
  *
  * Early detect code. This code runs at IOMMU detection time in the DMA
@@ -1342,16 +1329,13 @@
 
 void __init amd_iommu_detect(void)
 {
-	if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
+	if (no_iommu || (iommu_detected && !gart_iommu_aperture))
 		return;
 
 	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
 		iommu_detected = 1;
 		amd_iommu_detected = 1;
-#ifdef CONFIG_GART_IOMMU
-		gart_iommu_aperture_disabled = 1;
-		gart_iommu_aperture = 0;
-#endif
+		x86_init.iommu.iommu_init = amd_iommu_init;
 	}
 }
 
@@ -1372,10 +1356,6 @@
 static int __init parse_amd_iommu_options(char *str)
 {
 	for (; *str; ++str) {
-		if (strncmp(str, "isolate", 7) == 0)
-			amd_iommu_isolate = true;
-		if (strncmp(str, "share", 5) == 0)
-			amd_iommu_isolate = false;
 		if (strncmp(str, "fullflush", 9) == 0)
 			amd_iommu_unmap_flush = true;
 	}
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 128111d..e0dfb68 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -28,6 +28,7 @@
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
 #include <asm/k8.h>
+#include <asm/x86_init.h>
 
 int gart_iommu_aperture;
 int gart_iommu_aperture_disabled __initdata;
@@ -400,6 +401,7 @@
 
 			iommu_detected = 1;
 			gart_iommu_aperture = 1;
+			x86_init.iommu.iommu_init = gart_iommu_init;
 
 			aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
 			aper_size = (32 * 1024 * 1024) << aper_order;
@@ -456,7 +458,7 @@
 
 	if (aper_alloc) {
 		/* Got the aperture from the AGP bridge */
-	} else if (swiotlb && !valid_agp) {
+	} else if (!valid_agp) {
 		/* Do nothing */
 	} else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) ||
 		   force_iommu ||
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index da7b7b9..565c1bf 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -2,7 +2,7 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
-obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o probe_$(BITS).o ipi.o nmi.o
+obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o nmi.o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 894aa97..ad8c75b 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -241,28 +241,13 @@
 }
 
 /*
- * bare function to substitute write operation
- * and it's _that_ fast :)
- */
-static void native_apic_write_dummy(u32 reg, u32 v)
-{
-	WARN_ON_ONCE((cpu_has_apic || !disable_apic));
-}
-
-static u32 native_apic_read_dummy(u32 reg)
-{
-	WARN_ON_ONCE((cpu_has_apic && !disable_apic));
-	return 0;
-}
-
-/*
- * right after this call apic->write/read doesn't do anything
- * note that there is no restore operation it works one way
+ * right after this call apic become NOOP driven
+ * so apic->write/read doesn't do anything
  */
 void apic_disable(void)
 {
-	apic->read = native_apic_read_dummy;
-	apic->write = native_apic_write_dummy;
+	pr_info("APIC: switched to apic NOOP\n");
+	apic = &apic_noop;
 }
 
 void native_apic_wait_icr_idle(void)
@@ -459,7 +444,7 @@
 		v = apic_read(APIC_LVTT);
 		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
 		apic_write(APIC_LVTT, v);
-		apic_write(APIC_TMICT, 0xffffffff);
+		apic_write(APIC_TMICT, 0);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		/* Nothing to do here */
@@ -1392,14 +1377,11 @@
 	unsigned long flags;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 	int ret, x2apic_enabled = 0;
-	int dmar_table_init_ret = 0;
+	int dmar_table_init_ret;
 
-#ifdef CONFIG_INTR_REMAP
 	dmar_table_init_ret = dmar_table_init();
-	if (dmar_table_init_ret)
-		pr_debug("dmar_table_init() failed with %d:\n",
-				dmar_table_init_ret);
-#endif
+	if (dmar_table_init_ret && !x2apic_supported())
+		return;
 
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
new file mode 100644
index 0000000..d9acc3b
--- /dev/null
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -0,0 +1,200 @@
+/*
+ * NOOP APIC driver.
+ *
+ * Does almost nothing and should be substituted by a real apic driver via
+ * probe routine.
+ *
+ * Though in case if apic is disabled (for some reason) we try
+ * to not uglify the caller's code and allow to call (some) apic routines
+ * like self-ipi, etc...
+ */
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <asm/fixmap.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+
+#include <linux/smp.h>
+#include <asm/ipi.h>
+
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/e820.h>
+
+static void noop_init_apic_ldr(void) { }
+static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
+static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
+static void noop_send_IPI_allbutself(int vector) { }
+static void noop_send_IPI_all(int vector) { }
+static void noop_send_IPI_self(int vector) { }
+static void noop_apic_wait_icr_idle(void) { }
+static void noop_apic_icr_write(u32 low, u32 id) { }
+
+static int noop_wakeup_secondary_cpu(int apicid, unsigned long start_eip)
+{
+	return -1;
+}
+
+static u32 noop_safe_apic_wait_icr_idle(void)
+{
+	return 0;
+}
+
+static u64 noop_apic_icr_read(void)
+{
+	return 0;
+}
+
+static int noop_cpu_to_logical_apicid(int cpu)
+{
+	return 0;
+}
+
+static int noop_phys_pkg_id(int cpuid_apic, int index_msb)
+{
+	return 0;
+}
+
+static unsigned int noop_get_apic_id(unsigned long x)
+{
+	return 0;
+}
+
+static int noop_probe(void)
+{
+	/*
+	 * NOOP apic should not ever be
+	 * enabled via probe routine
+	 */
+	return 0;
+}
+
+static int noop_apic_id_registered(void)
+{
+	/*
+	 * if we would be really "pedantic"
+	 * we should pass read_apic_id() here
+	 * but since NOOP suppose APIC ID = 0
+	 * lets save a few cycles
+	 */
+	return physid_isset(0, phys_cpu_present_map);
+}
+
+static const struct cpumask *noop_target_cpus(void)
+{
+	/* only BSP here */
+	return cpumask_of(0);
+}
+
+static unsigned long noop_check_apicid_used(physid_mask_t *map, int apicid)
+{
+	return physid_isset(apicid, *map);
+}
+
+static unsigned long noop_check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+static void noop_vector_allocation_domain(int cpu, struct cpumask *retmask)
+{
+	if (cpu != 0)
+		pr_warning("APIC: Vector allocated for non-BSP cpu\n");
+	cpumask_clear(retmask);
+	cpumask_set_cpu(cpu, retmask);
+}
+
+int noop_apicid_to_node(int logical_apicid)
+{
+	/* we're always on node 0 */
+	return 0;
+}
+
+static u32 noop_apic_read(u32 reg)
+{
+	WARN_ON_ONCE((cpu_has_apic && !disable_apic));
+	return 0;
+}
+
+static void noop_apic_write(u32 reg, u32 v)
+{
+	WARN_ON_ONCE((cpu_has_apic || !disable_apic));
+}
+
+struct apic apic_noop = {
+	.name				= "noop",
+	.probe				= noop_probe,
+	.acpi_madt_oem_check		= NULL,
+
+	.apic_id_registered		= noop_apic_id_registered,
+
+	.irq_delivery_mode		= dest_LowestPrio,
+	/* logical delivery broadcast to all CPUs: */
+	.irq_dest_mode			= 1,
+
+	.target_cpus			= noop_target_cpus,
+	.disable_esr			= 0,
+	.dest_logical			= APIC_DEST_LOGICAL,
+	.check_apicid_used		= noop_check_apicid_used,
+	.check_apicid_present		= noop_check_apicid_present,
+
+	.vector_allocation_domain	= noop_vector_allocation_domain,
+	.init_apic_ldr			= noop_init_apic_ldr,
+
+	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
+	.setup_apic_routing		= NULL,
+	.multi_timer_check		= NULL,
+	.apicid_to_node			= noop_apicid_to_node,
+
+	.cpu_to_logical_apicid		= noop_cpu_to_logical_apicid,
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.apicid_to_cpu_present		= physid_set_mask_of_physid,
+
+	.setup_portio_remap		= NULL,
+	.check_phys_apicid_present	= default_check_phys_apicid_present,
+	.enable_apic_mode		= NULL,
+
+	.phys_pkg_id			= noop_phys_pkg_id,
+
+	.mps_oem_check			= NULL,
+
+	.get_apic_id			= noop_get_apic_id,
+	.set_apic_id			= NULL,
+	.apic_id_mask			= 0x0F << 24,
+
+	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
+	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
+
+	.send_IPI_mask			= noop_send_IPI_mask,
+	.send_IPI_mask_allbutself	= noop_send_IPI_mask_allbutself,
+	.send_IPI_allbutself		= noop_send_IPI_allbutself,
+	.send_IPI_all			= noop_send_IPI_all,
+	.send_IPI_self			= noop_send_IPI_self,
+
+	.wakeup_secondary_cpu		= noop_wakeup_secondary_cpu,
+
+	/* should be safe */
+	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
+	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
+
+	.wait_for_init_deassert		= NULL,
+
+	.smp_callin_clear_local_apic	= NULL,
+	.inquire_remote_apic		= NULL,
+
+	.read				= noop_apic_read,
+	.write				= noop_apic_write,
+	.icr_read			= noop_apic_icr_read,
+	.icr_write			= noop_apic_icr_write,
+	.wait_icr_idle			= noop_apic_wait_icr_idle,
+	.safe_wait_icr_idle		= noop_safe_apic_wait_icr_idle,
+};
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 77a0641..38dcecf 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -35,7 +35,7 @@
 #endif
 }
 
-static unsigned long bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long bigsmp_check_apicid_used(physid_mask_t *map, int apicid)
 {
 	return 0;
 }
@@ -93,11 +93,6 @@
 	return BAD_APICID;
 }
 
-static physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
 /* Mapping from cpu number to logical apicid */
 static inline int bigsmp_cpu_to_logical_apicid(int cpu)
 {
@@ -106,10 +101,10 @@
 	return cpu_physical_id(cpu);
 }
 
-static physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
+static void bigsmp_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
+	physids_promote(0xFFL, retmap);
 }
 
 static int bigsmp_check_phys_apicid_present(int phys_apicid)
@@ -230,7 +225,7 @@
 	.apicid_to_node			= bigsmp_apicid_to_node,
 	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= bigsmp_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= bigsmp_apicid_to_cpu_present,
+	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= bigsmp_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 89174f8..e85f8fb 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -466,11 +466,11 @@
 	return cpumask_of(smp_processor_id());
 }
 
-static unsigned long
-es7000_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long es7000_check_apicid_used(physid_mask_t *map, int apicid)
 {
 	return 0;
 }
+
 static unsigned long es7000_check_apicid_present(int bit)
 {
 	return physid_isset(bit, phys_cpu_present_map);
@@ -539,14 +539,10 @@
 
 static int cpu_id;
 
-static physid_mask_t es7000_apicid_to_cpu_present(int phys_apicid)
+static void es7000_apicid_to_cpu_present(int phys_apicid, physid_mask_t *retmap)
 {
-	physid_mask_t mask;
-
-	mask = physid_mask_of_physid(cpu_id);
+	physid_set_mask_of_physid(cpu_id, retmap);
 	++cpu_id;
-
-	return mask;
 }
 
 /* Mapping from cpu number to logical apicid */
@@ -561,10 +557,10 @@
 #endif
 }
 
-static physid_mask_t es7000_ioapic_phys_id_map(physid_mask_t phys_map)
+static void es7000_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xff);
+	physids_promote(0xFFL, retmap);
 }
 
 static int es7000_check_phys_apicid_present(int cpu_physical_apicid)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index dc69f28..c0b4468 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -60,8 +60,6 @@
 #include <asm/irq_remapping.h>
 #include <asm/hpet.h>
 #include <asm/hw_irq.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/uv_irq.h>
 
 #include <asm/apic.h>
 
@@ -140,20 +138,6 @@
 	return pin;
 }
 
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * Most irqs are mapped 1:1 with pins.
- */
-struct irq_cfg {
-	struct irq_pin_list *irq_2_pin;
-	cpumask_var_t domain;
-	cpumask_var_t old_domain;
-	unsigned move_cleanup_count;
-	u8 vector;
-	u8 move_in_progress : 1;
-};
-
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
 #ifdef CONFIG_SPARSE_IRQ
 static struct irq_cfg irq_cfgx[] = {
@@ -209,7 +193,7 @@
 }
 
 #ifdef CONFIG_SPARSE_IRQ
-static struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	struct irq_cfg *cfg = NULL;
 	struct irq_desc *desc;
@@ -361,7 +345,7 @@
 /* end for move_irq_desc */
 
 #else
-static struct irq_cfg *irq_cfg(unsigned int irq)
+struct irq_cfg *irq_cfg(unsigned int irq)
 {
 	return irq < nr_irqs ? irq_cfgx + irq : NULL;
 }
@@ -555,23 +539,41 @@
 	add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
+static void __io_apic_modify_irq(struct irq_pin_list *entry,
+				 int mask_and, int mask_or,
+				 void (*final)(struct irq_pin_list *entry))
+{
+	unsigned int reg, pin;
+
+	pin = entry->pin;
+	reg = io_apic_read(entry->apic, 0x10 + pin * 2);
+	reg &= mask_and;
+	reg |= mask_or;
+	io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
+	if (final)
+		final(entry);
+}
+
 static void io_apic_modify_irq(struct irq_cfg *cfg,
 			       int mask_and, int mask_or,
 			       void (*final)(struct irq_pin_list *entry))
 {
-	int pin;
 	struct irq_pin_list *entry;
 
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
-		unsigned int reg;
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
-		reg &= mask_and;
-		reg |= mask_or;
-		io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
-		if (final)
-			final(entry);
-	}
+	for_each_irq_pin(entry, cfg->irq_2_pin)
+		__io_apic_modify_irq(entry, mask_and, mask_or, final);
+}
+
+static void __mask_and_edge_IO_APIC_irq(struct irq_pin_list *entry)
+{
+	__io_apic_modify_irq(entry, ~IO_APIC_REDIR_LEVEL_TRIGGER,
+			     IO_APIC_REDIR_MASKED, NULL);
+}
+
+static void __unmask_and_level_IO_APIC_irq(struct irq_pin_list *entry)
+{
+	__io_apic_modify_irq(entry, ~IO_APIC_REDIR_MASKED,
+			     IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
 }
 
 static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
@@ -595,18 +597,6 @@
 	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 }
 
-static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
-			IO_APIC_REDIR_MASKED, NULL);
-}
-
-static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
-			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
-}
-
 static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
 {
 	struct irq_cfg *cfg = desc->chip_data;
@@ -1177,7 +1167,7 @@
 	int cpu, err;
 	cpumask_var_t tmp_mask;
 
-	if ((cfg->move_in_progress) || cfg->move_cleanup_count)
+	if (cfg->move_in_progress)
 		return -EBUSY;
 
 	if (!alloc_cpumask_var(&tmp_mask, GFP_ATOMIC))
@@ -1237,8 +1227,7 @@
 	return err;
 }
 
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
+int assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
 {
 	int err;
 	unsigned long flags;
@@ -1599,9 +1588,6 @@
 	struct irq_desc *desc;
 	unsigned int irq;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 	for (i = 0; i < nr_ioapics; i++)
 		printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
@@ -1708,9 +1694,6 @@
 {
 	int i;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
@@ -1724,9 +1707,6 @@
 	unsigned int i, v, ver, maxlvt;
 	u64 icr;
 
-	if (apic_verbosity == APIC_QUIET)
-		return;
-
 	printk(KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
 	v = apic_read(APIC_ID);
@@ -1824,13 +1804,19 @@
 	printk("\n");
 }
 
-__apicdebuginit(void) print_all_local_APICs(void)
+__apicdebuginit(void) print_local_APICs(int maxcpu)
 {
 	int cpu;
 
+	if (!maxcpu)
+		return;
+
 	preempt_disable();
-	for_each_online_cpu(cpu)
+	for_each_online_cpu(cpu) {
+		if (cpu >= maxcpu)
+			break;
 		smp_call_function_single(cpu, print_local_APIC, NULL, 1);
+	}
 	preempt_enable();
 }
 
@@ -1839,7 +1825,7 @@
 	unsigned int v;
 	unsigned long flags;
 
-	if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs)
+	if (!nr_legacy_irqs)
 		return;
 
 	printk(KERN_DEBUG "\nprinting PIC contents\n");
@@ -1866,21 +1852,41 @@
 	printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
 }
 
-__apicdebuginit(int) print_all_ICs(void)
+static int __initdata show_lapic = 1;
+static __init int setup_show_lapic(char *arg)
 {
+	int num = -1;
+
+	if (strcmp(arg, "all") == 0) {
+		show_lapic = CONFIG_NR_CPUS;
+	} else {
+		get_option(&arg, &num);
+		if (num >= 0)
+			show_lapic = num;
+	}
+
+	return 1;
+}
+__setup("show_lapic=", setup_show_lapic);
+
+__apicdebuginit(int) print_ICs(void)
+{
+	if (apic_verbosity == APIC_QUIET)
+		return 0;
+
 	print_PIC();
 
 	/* don't print out if apic is not there */
 	if (!cpu_has_apic && !apic_from_smp_config())
 		return 0;
 
-	print_all_local_APICs();
+	print_local_APICs(show_lapic);
 	print_IO_APIC();
 
 	return 0;
 }
 
-fs_initcall(print_all_ICs);
+fs_initcall(print_ICs);
 
 
 /* Where if anywhere is the i8259 connect in external int mode */
@@ -2031,7 +2037,7 @@
 	 * This is broken; anything with a real cpu count has to
 	 * circumvent this idiocy regardless.
 	 */
-	phys_id_present_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
+	apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map);
 
 	/*
 	 * Set the IOAPIC ID to the value stored in the MPC table.
@@ -2058,7 +2064,7 @@
 		 * system must have a unique ID or we get lots of nice
 		 * 'stuck on smp_invalidate_needed IPI wait' messages.
 		 */
-		if (apic->check_apicid_used(phys_id_present_map,
+		if (apic->check_apicid_used(&phys_id_present_map,
 					mp_ioapics[apic_id].apicid)) {
 			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
 				apic_id, mp_ioapics[apic_id].apicid);
@@ -2073,7 +2079,7 @@
 			mp_ioapics[apic_id].apicid = i;
 		} else {
 			physid_mask_t tmp;
-			tmp = apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid);
+			apic->apicid_to_cpu_present(mp_ioapics[apic_id].apicid, &tmp);
 			apic_printk(APIC_VERBOSE, "Setting %d in the "
 					"phys_id_present_map\n",
 					mp_ioapics[apic_id].apicid);
@@ -2228,20 +2234,16 @@
  */
 
 #ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
+void send_cleanup_vector(struct irq_cfg *cfg)
 {
 	cpumask_var_t cleanup_mask;
 
 	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
 		unsigned int i;
-		cfg->move_cleanup_count = 0;
-		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
-			cfg->move_cleanup_count++;
 		for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
 			apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
 	} else {
 		cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
-		cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
 		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
 		free_cpumask_var(cleanup_mask);
 	}
@@ -2272,15 +2274,12 @@
 	}
 }
 
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
 /*
  * Either sets desc->affinity to a valid value, and returns
  * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
  * leaves desc->affinity untouched.
  */
-static unsigned int
+unsigned int
 set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
 {
 	struct irq_cfg *cfg;
@@ -2433,8 +2432,6 @@
 
 		cfg = irq_cfg(irq);
 		spin_lock(&desc->lock);
-		if (!cfg->move_cleanup_count)
-			goto unlock;
 
 		if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 			goto unlock;
@@ -2452,7 +2449,6 @@
 			goto unlock;
 		}
 		__get_cpu_var(vector_irq)[vector] = -1;
-		cfg->move_cleanup_count--;
 unlock:
 		spin_unlock(&desc->lock);
 	}
@@ -2460,21 +2456,33 @@
 	irq_exit();
 }
 
-static void irq_complete_move(struct irq_desc **descp)
+static void __irq_complete_move(struct irq_desc **descp, unsigned vector)
 {
 	struct irq_desc *desc = *descp;
 	struct irq_cfg *cfg = desc->chip_data;
-	unsigned vector, me;
+	unsigned me;
 
 	if (likely(!cfg->move_in_progress))
 		return;
 
-	vector = ~get_irq_regs()->orig_ax;
 	me = smp_processor_id();
 
 	if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
 		send_cleanup_vector(cfg);
 }
+
+static void irq_complete_move(struct irq_desc **descp)
+{
+	__irq_complete_move(descp, ~get_irq_regs()->orig_ax);
+}
+
+void irq_force_complete_move(int irq)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg = desc->chip_data;
+
+	__irq_complete_move(&desc, cfg->vector);
+}
 #else
 static inline void irq_complete_move(struct irq_desc **descp) {}
 #endif
@@ -2490,6 +2498,59 @@
 
 atomic_t irq_mis_count;
 
+/*
+ * IO-APIC versions below 0x20 don't support EOI register.
+ * For the record, here is the information about various versions:
+ *     0Xh     82489DX
+ *     1Xh     I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant
+ *     2Xh     I/O(x)APIC which is PCI 2.2 Compliant
+ *     30h-FFh Reserved
+ *
+ * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic
+ * version as 0x2. This is an error with documentation and these ICH chips
+ * use io-apic's of version 0x20.
+ *
+ * For IO-APIC's with EOI register, we use that to do an explicit EOI.
+ * Otherwise, we simulate the EOI message manually by changing the trigger
+ * mode to edge and then back to level, with RTE being masked during this.
+*/
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+	struct irq_pin_list *entry;
+
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
+		if (mp_ioapics[entry->apic].apicver >= 0x20) {
+			/*
+			 * Intr-remapping uses pin number as the virtual vector
+			 * in the RTE. Actual vector is programmed in
+			 * intr-remapping table entry. Hence for the io-apic
+			 * EOI we use the pin number.
+			 */
+			if (irq_remapped(irq))
+				io_apic_eoi(entry->apic, entry->pin);
+			else
+				io_apic_eoi(entry->apic, cfg->vector);
+		} else {
+			__mask_and_edge_IO_APIC_irq(entry);
+			__unmask_and_level_IO_APIC_irq(entry);
+		}
+	}
+}
+
+static void eoi_ioapic_irq(struct irq_desc *desc)
+{
+	struct irq_cfg *cfg;
+	unsigned long flags;
+	unsigned int irq;
+
+	irq = desc->irq;
+	cfg = desc->chip_data;
+
+	spin_lock_irqsave(&ioapic_lock, flags);
+	__eoi_ioapic_irq(irq, cfg);
+	spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
 static void ack_apic_level(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
@@ -2525,6 +2586,19 @@
 	 * level-triggered interrupt.  We mask the source for the time of the
 	 * operation to prevent an edge-triggered interrupt escaping meanwhile.
 	 * The idea is from Manfred Spraul.  --macro
+	 *
+	 * Also in the case when cpu goes offline, fixup_irqs() will forward
+	 * any unhandled interrupt on the offlined cpu to the new cpu
+	 * destination that is handling the corresponding interrupt. This
+	 * interrupt forwarding is done via IPI's. Hence, in this case also
+	 * level-triggered io-apic interrupt will be seen as an edge
+	 * interrupt in the IRR. And we can't rely on the cpu's EOI
+	 * to be broadcasted to the IO-APIC's which will clear the remoteIRR
+	 * corresponding to the level-triggered interrupt. Hence on IO-APIC's
+	 * supporting EOI register, we do an explicit EOI to clear the
+	 * remote IRR and on IO-APIC's which don't have an EOI register,
+	 * we use the above logic (mask+edge followed by unmask+level) from
+	 * Manfred Spraul to clear the remote IRR.
 	 */
 	cfg = desc->chip_data;
 	i = cfg->vector;
@@ -2536,6 +2610,19 @@
 	 */
 	ack_APIC_irq();
 
+	/*
+	 * Tail end of clearing remote IRR bit (either by delivering the EOI
+	 * message via io-apic EOI register write or simulating it using
+	 * mask+edge followed by unnask+level logic) manually when the
+	 * level triggered interrupt is seen as the edge triggered interrupt
+	 * at the cpu.
+	 */
+	if (!(v & (1 << (i & 0x1f)))) {
+		atomic_inc(&irq_mis_count);
+
+		eoi_ioapic_irq(desc);
+	}
+
 	/* Now we can move and renable the irq */
 	if (unlikely(do_unmask_irq)) {
 		/* Only migrate the irq if the ack has been received.
@@ -2569,41 +2656,9 @@
 			move_masked_irq(irq);
 		unmask_IO_APIC_irq_desc(desc);
 	}
-
-	/* Tail end of version 0x11 I/O APIC bug workaround */
-	if (!(v & (1 << (i & 0x1f)))) {
-		atomic_inc(&irq_mis_count);
-		spin_lock(&ioapic_lock);
-		__mask_and_edge_IO_APIC_irq(cfg);
-		__unmask_and_level_IO_APIC_irq(cfg);
-		spin_unlock(&ioapic_lock);
-	}
 }
 
 #ifdef CONFIG_INTR_REMAP
-static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
-	struct irq_pin_list *entry;
-
-	for_each_irq_pin(entry, cfg->irq_2_pin)
-		io_apic_eoi(entry->apic, entry->pin);
-}
-
-static void
-eoi_ioapic_irq(struct irq_desc *desc)
-{
-	struct irq_cfg *cfg;
-	unsigned long flags;
-	unsigned int irq;
-
-	irq = desc->irq;
-	cfg = desc->chip_data;
-
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__eoi_ioapic_irq(irq, cfg);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
 static void ir_ack_apic_edge(unsigned int irq)
 {
 	ack_APIC_irq();
@@ -3157,6 +3212,7 @@
 			continue;
 
 		desc_new = move_irq_desc(desc_new, node);
+		cfg_new = desc_new->chip_data;
 
 		if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
 			irq = new;
@@ -3708,75 +3764,6 @@
 }
 #endif /* CONFIG_HT_IRQ */
 
-#ifdef CONFIG_X86_UV
-/*
- * Re-target the irq to the specified CPU and enable the specified MMR located
- * on the specified blade to allow the sending of MSIs to the specified CPU.
- */
-int arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
-		       unsigned long mmr_offset)
-{
-	const struct cpumask *eligible_cpu = cpumask_of(cpu);
-	struct irq_cfg *cfg;
-	int mmr_pnode;
-	unsigned long mmr_value;
-	struct uv_IO_APIC_route_entry *entry;
-	unsigned long flags;
-	int err;
-
-	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	cfg = irq_cfg(irq);
-
-	err = assign_irq_vector(irq, cfg, eligible_cpu);
-	if (err != 0)
-		return err;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
-				      irq_name);
-	spin_unlock_irqrestore(&vector_lock, flags);
-
-	mmr_value = 0;
-	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	entry->vector		= cfg->vector;
-	entry->delivery_mode	= apic->irq_delivery_mode;
-	entry->dest_mode	= apic->irq_dest_mode;
-	entry->polarity		= 0;
-	entry->trigger		= 0;
-	entry->mask		= 0;
-	entry->dest		= apic->cpu_mask_to_apicid(eligible_cpu);
-
-	mmr_pnode = uv_blade_to_pnode(mmr_blade);
-	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-
-	if (cfg->move_in_progress)
-		send_cleanup_vector(cfg);
-
-	return irq;
-}
-
-/*
- * Disable the specified MMR located on the specified blade so that MSIs are
- * longer allowed to be sent.
- */
-void arch_disable_uv_irq(int mmr_blade, unsigned long mmr_offset)
-{
-	unsigned long mmr_value;
-	struct uv_IO_APIC_route_entry *entry;
-	int mmr_pnode;
-
-	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
-	mmr_value = 0;
-	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
-	entry->mask = 1;
-
-	mmr_pnode = uv_blade_to_pnode(mmr_blade);
-	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
-}
-#endif /* CONFIG_X86_64 */
-
 int __init io_apic_get_redir_entries (int ioapic)
 {
 	union IO_APIC_reg_01	reg_01;
@@ -3944,7 +3931,7 @@
 	 */
 
 	if (physids_empty(apic_id_map))
-		apic_id_map = apic->ioapic_phys_id_map(phys_cpu_present_map);
+		apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	reg_00.raw = io_apic_read(ioapic, 0);
@@ -3960,10 +3947,10 @@
 	 * Every APIC in a system must have a unique ID or we get lots of nice
 	 * 'stuck on smp_invalidate_needed IPI wait' messages.
 	 */
-	if (apic->check_apicid_used(apic_id_map, apic_id)) {
+	if (apic->check_apicid_used(&apic_id_map, apic_id)) {
 
 		for (i = 0; i < get_physical_broadcast(); i++) {
-			if (!apic->check_apicid_used(apic_id_map, i))
+			if (!apic->check_apicid_used(&apic_id_map, i))
 				break;
 		}
 
@@ -3976,7 +3963,7 @@
 		apic_id = i;
 	}
 
-	tmp = apic->apicid_to_cpu_present(apic_id);
+	apic->apicid_to_cpu_present(apic_id, &tmp);
 	physids_or(apic_id_map, apic_id_map, tmp);
 
 	if (reg_00.bits.ID != apic_id) {
@@ -4106,7 +4093,7 @@
 	for (i = 0; i < nr_ioapics; i++) {
 		res[i].name = mem;
 		res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		sprintf(mem,  "IOAPIC %u", i);
+		snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i);
 		mem += IOAPIC_RESOURCE_NAME_SIZE;
 	}
 
@@ -4140,18 +4127,17 @@
 #ifdef CONFIG_X86_32
 fake_ioapic_page:
 #endif
-			ioapic_phys = (unsigned long)
-				alloc_bootmem_pages(PAGE_SIZE);
+			ioapic_phys = (unsigned long)alloc_bootmem_pages(PAGE_SIZE);
 			ioapic_phys = __pa(ioapic_phys);
 		}
 		set_fixmap_nocache(idx, ioapic_phys);
-		apic_printk(APIC_VERBOSE,
-			    "mapped IOAPIC to %08lx (%08lx)\n",
-			    __fix_to_virt(idx), ioapic_phys);
+		apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n",
+			__fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK),
+			ioapic_phys);
 		idx++;
 
 		ioapic_res->start = ioapic_phys;
-		ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+		ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
 		ioapic_res++;
 	}
 }
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 7ff61d6..6389432 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -39,7 +39,8 @@
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
 
-static cpumask_t backtrace_mask __read_mostly;
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
 
 /* nmi_active:
  * >0: the lapic NMI watchdog is active, but can be disabled
@@ -414,7 +415,7 @@
 	}
 
 	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (cpumask_test_cpu(cpu, &backtrace_mask)) {
+	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
@@ -422,7 +423,7 @@
 		show_regs(regs);
 		dump_stack();
 		spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, &backtrace_mask);
+		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
 
 		rc = 1;
 	}
@@ -558,14 +559,14 @@
 {
 	int i;
 
-	cpumask_copy(&backtrace_mask, cpu_online_mask);
+	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
 
 	printk(KERN_INFO "sending NMI to all CPUs:\n");
 	apic->send_IPI_all(NMI_VECTOR);
 
 	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
 	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(&backtrace_mask))
+		if (cpumask_empty(to_cpumask(backtrace_mask)))
 			break;
 		mdelay(1);
 	}
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index efa00e2..98c4665 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -264,11 +264,6 @@
 static __init void early_check_numaq(void)
 {
 	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-	early_find_smp_config();
-
-	/*
 	 * get boot-time SMP configuration:
 	 */
 	if (smp_found_config)
@@ -334,10 +329,9 @@
 	return cpu_all_mask;
 }
 
-static inline unsigned long
-numaq_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long numaq_check_apicid_used(physid_mask_t *map, int apicid)
 {
-	return physid_isset(apicid, bitmap);
+	return physid_isset(apicid, *map);
 }
 
 static inline unsigned long numaq_check_apicid_present(int bit)
@@ -371,10 +365,10 @@
 	return apic != 0 && irq == 0;
 }
 
-static inline physid_mask_t numaq_ioapic_phys_id_map(physid_mask_t phys_map)
+static inline void numaq_ioapic_phys_id_map(physid_mask_t *phys_map, physid_mask_t *retmap)
 {
 	/* We don't have a good way to do this yet - hack */
-	return physids_promote(0xFUL);
+	return physids_promote(0xFUL, retmap);
 }
 
 static inline int numaq_cpu_to_logical_apicid(int cpu)
@@ -402,12 +396,12 @@
 	return logical_apicid >> 4;
 }
 
-static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid)
+static void numaq_apicid_to_cpu_present(int logical_apicid, physid_mask_t *retmap)
 {
 	int node = numaq_apicid_to_node(logical_apicid);
 	int cpu = __ffs(logical_apicid & 0xf);
 
-	return physid_mask_of_physid(cpu + 4*node);
+	physid_set_mask_of_physid(cpu + 4*node, retmap);
 }
 
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 0c0182c..1a6559f 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -108,7 +108,7 @@
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-	.apicid_to_cpu_present		= default_apicid_to_cpu_present,
+	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 	.setup_portio_remap		= NULL,
 	.check_phys_apicid_present	= default_check_phys_apicid_present,
 	.enable_apic_mode		= NULL,
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 645ecc4..9b41926 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -183,7 +183,7 @@
 	return cpumask_of(0);
 }
 
-static unsigned long summit_check_apicid_used(physid_mask_t bitmap, int apicid)
+static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid)
 {
 	return 0;
 }
@@ -261,15 +261,15 @@
 		return BAD_APICID;
 }
 
-static physid_mask_t summit_ioapic_phys_id_map(physid_mask_t phys_id_map)
+static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap)
 {
 	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0x0F);
+	physids_promote(0x0FL, retmap);
 }
 
-static physid_mask_t summit_apicid_to_cpu_present(int apicid)
+static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap)
 {
-	return physid_mask_of_physid(0);
+	physid_set_mask_of_physid(0, retmap);
 }
 
 static int summit_check_phys_apicid_present(int physical_apicid)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 326c254..b684bb3 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -30,10 +30,22 @@
 #include <asm/apic.h>
 #include <asm/ipi.h>
 #include <asm/smp.h>
+#include <asm/x86_init.h>
 
 DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 static enum uv_system_type uv_system_type;
+static u64 gru_start_paddr, gru_end_paddr;
+
+static inline bool is_GRU_range(u64 start, u64 end)
+{
+	return start >= gru_start_paddr && end <= gru_end_paddr;
+}
+
+static bool uv_is_untracked_pat_range(u64 start, u64 end)
+{
+	return is_ISA_range(start, end) || is_GRU_range(start, end);
+}
 
 static int early_get_nodeid(void)
 {
@@ -49,6 +61,7 @@
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (!strcmp(oem_id, "SGI")) {
+		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		if (!strcmp(oem_table_id, "UVL"))
 			uv_system_type = UV_LEGACY_APIC;
 		else if (!strcmp(oem_table_id, "UVX"))
@@ -385,8 +398,12 @@
 	int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
 
 	gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
-	if (gru.s.enable)
+	if (gru.s.enable) {
 		map_high("GRU", gru.s.base, shift, max_pnode, map_wb);
+		gru_start_paddr = ((u64)gru.s.base << shift);
+		gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
+
+	}
 }
 
 static __init void map_mmr_high(int max_pnode)
@@ -409,6 +426,12 @@
 		map_high("MMIOH", mmioh.s.base, shift, max_pnode, map_uc);
 }
 
+static __init void map_low_mmrs(void)
+{
+	init_extra_mapping_uc(UV_GLOBAL_MMR32_BASE, UV_GLOBAL_MMR32_SIZE);
+	init_extra_mapping_uc(UV_LOCAL_MMR_BASE, UV_LOCAL_MMR_SIZE);
+}
+
 static __init void uv_rtc_init(void)
 {
 	long status;
@@ -550,6 +573,8 @@
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 
+	map_low_mmrs();
+
 	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 151ace6..b5b6b23 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -204,7 +204,6 @@
 #include <linux/module.h>
 
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/timer.h>
@@ -403,6 +402,7 @@
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
+static DEFINE_MUTEX(apm_mutex);
 
 /*
  * Set up a segment that references the real mode segment 0x40
@@ -1531,7 +1531,7 @@
 		return -EPERM;
 	switch (cmd) {
 	case APM_IOC_STANDBY:
-		lock_kernel();
+		mutex_lock(&apm_mutex);
 		if (as->standbys_read > 0) {
 			as->standbys_read--;
 			as->standbys_pending--;
@@ -1540,10 +1540,10 @@
 			queue_event(APM_USER_STANDBY, as);
 		if (standbys_pending <= 0)
 			standby();
-		unlock_kernel();
+		mutex_unlock(&apm_mutex);
 		break;
 	case APM_IOC_SUSPEND:
-		lock_kernel();
+		mutex_lock(&apm_mutex);
 		if (as->suspends_read > 0) {
 			as->suspends_read--;
 			as->suspends_pending--;
@@ -1552,13 +1552,14 @@
 			queue_event(APM_USER_SUSPEND, as);
 		if (suspends_pending <= 0) {
 			ret = suspend(1);
+			mutex_unlock(&apm_mutex);
 		} else {
 			as->suspend_wait = 1;
+			mutex_unlock(&apm_mutex);
 			wait_event_interruptible(apm_suspend_waitqueue,
 					as->suspend_wait == 0);
 			ret = as->suspend_result;
 		}
-		unlock_kernel();
 		return ret;
 	default:
 		return -ENOTTY;
@@ -1608,12 +1609,10 @@
 {
 	struct apm_user *as;
 
-	lock_kernel();
 	as = kmalloc(sizeof(*as), GFP_KERNEL);
 	if (as == NULL) {
 		printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
 		       sizeof(*as));
-		       unlock_kernel();
 		return -ENOMEM;
 	}
 	as->magic = APM_BIOS_MAGIC;
@@ -1635,7 +1634,6 @@
 	user_list = as;
 	spin_unlock(&user_list_lock);
 	filp->private_data = as;
-	unlock_kernel();
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 68537e9..1d2cb38 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -5,6 +5,7 @@
 # Don't trace early stages of a secondary CPU boot
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_common.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
 endif
 
 # Make sure load_percpu_segment has no stackprotector
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index c910a716..7128b37 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -535,7 +535,7 @@
 		}
 	}
 
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */
 	if (c->extended_cpuid_level >= 0x80000008) {
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index c95e831..e58d978 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -294,7 +294,7 @@
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
 
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 }
 
 enum {
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index cc25c2b..c1afa99 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -61,7 +61,7 @@
 static void __cpuinit default_init(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_64
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 #else
 	/* Not much we can do here... */
 	/* Check if at least it has cpuid */
@@ -383,7 +383,7 @@
 	}
 }
 
-void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
+void __cpuinit cpu_detect_cache_sizes(struct cpuinfo_x86 *c)
 {
 	unsigned int n, dummy, ebx, ecx, edx, l2size;
 
@@ -391,8 +391,6 @@
 
 	if (n >= 0x80000005) {
 		cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
-		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
-				edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
 		c->x86_cache_size = (ecx>>24) + (edx>>24);
 #ifdef CONFIG_X86_64
 		/* On K8 L1 TLB is inclusive, so don't count it */
@@ -422,9 +420,6 @@
 #endif
 
 	c->x86_cache_size = l2size;
-
-	printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
-			l2size, ecx & 0xFF);
 }
 
 void __cpuinit detect_ht(struct cpuinfo_x86 *c)
@@ -659,24 +654,31 @@
 	const struct cpu_dev *const *cdev;
 	int count = 0;
 
+#ifdef PROCESSOR_SELECT
 	printk(KERN_INFO "KERNEL supported cpus:\n");
+#endif
+
 	for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
 		const struct cpu_dev *cpudev = *cdev;
-		unsigned int j;
 
 		if (count >= X86_VENDOR_NUM)
 			break;
 		cpu_devs[count] = cpudev;
 		count++;
 
-		for (j = 0; j < 2; j++) {
-			if (!cpudev->c_ident[j])
-				continue;
-			printk(KERN_INFO "  %s %s\n", cpudev->c_vendor,
-				cpudev->c_ident[j]);
-		}
-	}
+#ifdef PROCESSOR_SELECT
+		{
+			unsigned int j;
 
+			for (j = 0; j < 2; j++) {
+				if (!cpudev->c_ident[j])
+					continue;
+				printk(KERN_INFO "  %s %s\n", cpudev->c_vendor,
+					cpudev->c_ident[j]);
+			}
+		}
+#endif
+	}
 	early_identify_cpu(&boot_cpu_data);
 }
 
@@ -837,10 +839,8 @@
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
-#ifdef CONFIG_X86_MCE
 	/* Init Machine Check Exception if available. */
-	mcheck_init(c);
-#endif
+	mcheck_cpu_init(c);
 
 	select_idle_routine(c);
 
@@ -1136,7 +1136,7 @@
 	wrmsrl(MSR_KERNEL_GS_BASE, 0);
 	barrier();
 
-	check_efer();
+	x86_configure_nx();
 	if (cpu != 0)
 		enable_x2apic();
 
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 6de9a90..3624e8a 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -32,6 +32,6 @@
 extern const struct cpu_dev *const __x86_cpu_dev_start[],
 			    *const __x86_cpu_dev_end[];
 
-extern void display_cacheinfo(struct cpuinfo_x86 *c);
+extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
 
 #endif
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 19807b8..4fbd384 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -373,7 +373,7 @@
 	/* Handle the GX (Formally known as the GX2) */
 
 	if (c->x86 == 5 && c->x86_model == 5)
-		display_cacheinfo(c);
+		cpu_detect_cache_sizes(c);
 	else
 		init_cyrix(c);
 }
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 40e1835..c900b73 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -263,8 +263,12 @@
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
 	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE || !node_online(node))
+	if (node == NUMA_NO_NODE)
 		node = first_node(node_online_map);
+	else if (!node_online(node)) {
+		/* reuse the value from init_cpu_to_node() */
+		node = cpu_to_node(cpu);
+	}
 	numa_set_node(cpu, node);
 
 	printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node);
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 804c40e..6c40f6b 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -94,7 +94,7 @@
 	{ 0xd1, LVL_3,    1024 },	/* 4-way set assoc, 64 byte line size */
 	{ 0xd2, LVL_3,    2048 },	/* 4-way set assoc, 64 byte line size */
 	{ 0xd6, LVL_3,    1024 },	/* 8-way set assoc, 64 byte line size */
-	{ 0xd7, LVL_3,    2038 },	/* 8-way set assoc, 64 byte line size */
+	{ 0xd7, LVL_3,    2048 },	/* 8-way set assoc, 64 byte line size */
 	{ 0xd8, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
 	{ 0xdc, LVL_3,    2048 },	/* 12-way set assoc, 64 byte line size */
 	{ 0xdd, LVL_3,    4096 },	/* 12-way set assoc, 64 byte line size */
@@ -102,6 +102,9 @@
 	{ 0xe2, LVL_3,    2048 },	/* 16-way set assoc, 64 byte line size */
 	{ 0xe3, LVL_3,    4096 },	/* 16-way set assoc, 64 byte line size */
 	{ 0xe4, LVL_3,    8192 },	/* 16-way set assoc, 64 byte line size */
+	{ 0xea, LVL_3,    12288 },	/* 24-way set assoc, 64 byte line size */
+	{ 0xeb, LVL_3,    18432 },	/* 24-way set assoc, 64 byte line size */
+	{ 0xec, LVL_3,    24576 },	/* 24-way set assoc, 64 byte line size */
 	{ 0x00, 0, 0}
 };
 
@@ -488,22 +491,6 @@
 #endif
 	}
 
-	if (trace)
-		printk(KERN_INFO "CPU: Trace cache: %dK uops", trace);
-	else if (l1i)
-		printk(KERN_INFO "CPU: L1 I cache: %dK", l1i);
-
-	if (l1d)
-		printk(KERN_CONT ", L1 D cache: %dK\n", l1d);
-	else
-		printk(KERN_CONT "\n");
-
-	if (l2)
-		printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
-
-	if (l3)
-		printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
-
 	c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
 
 	return l2;
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 721a77c..d7ebf25 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -46,6 +46,9 @@
 
 #include "mce-internal.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/mce.h>
+
 int mce_disabled __read_mostly;
 
 #define MISC_MCELOG_MINOR	227
@@ -85,18 +88,26 @@
 static DEFINE_PER_CPU(struct mce, mces_seen);
 static int			cpu_missing;
 
-static void default_decode_mce(struct mce *m)
+/*
+ * CPU/chipset specific EDAC code can register a notifier call here to print
+ * MCE errors in a human-readable form.
+ */
+ATOMIC_NOTIFIER_HEAD(x86_mce_decoder_chain);
+EXPORT_SYMBOL_GPL(x86_mce_decoder_chain);
+
+static int default_decode_mce(struct notifier_block *nb, unsigned long val,
+			       void *data)
 {
 	pr_emerg("No human readable MCE decoding support on this CPU type.\n");
 	pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+
+	return NOTIFY_STOP;
 }
 
-/*
- * CPU/chipset specific EDAC code can register a callback here to print
- * MCE errors in a human-readable form:
- */
-void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce;
-EXPORT_SYMBOL(x86_mce_decode_callback);
+static struct notifier_block mce_dec_nb = {
+	.notifier_call = default_decode_mce,
+	.priority      = -1,
+};
 
 /* MCA banks polled by the period polling timer for corrected events */
 DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
@@ -141,6 +152,9 @@
 {
 	unsigned next, entry;
 
+	/* Emit the trace record: */
+	trace_mce_record(mce);
+
 	mce->finished = 0;
 	wmb();
 	for (;;) {
@@ -204,9 +218,9 @@
 
 	/*
 	 * Print out human-readable details about the MCE error,
-	 * (if the CPU has an implementation for that):
+	 * (if the CPU has an implementation for that)
 	 */
-	x86_mce_decode_callback(m);
+	atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, m);
 }
 
 static void print_mce_head(void)
@@ -1122,7 +1136,7 @@
 static DEFINE_PER_CPU(int, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
-static void mcheck_timer(unsigned long data)
+static void mce_start_timer(unsigned long data)
 {
 	struct timer_list *t = &per_cpu(mce_timer, data);
 	int *n;
@@ -1187,7 +1201,7 @@
 }
 EXPORT_SYMBOL_GPL(mce_notify_irq);
 
-static int mce_banks_init(void)
+static int __cpuinit __mcheck_cpu_mce_banks_init(void)
 {
 	int i;
 
@@ -1206,7 +1220,7 @@
 /*
  * Initialize Machine Checks for a CPU.
  */
-static int __cpuinit mce_cap_init(void)
+static int __cpuinit __mcheck_cpu_cap_init(void)
 {
 	unsigned b;
 	u64 cap;
@@ -1228,7 +1242,7 @@
 	WARN_ON(banks != 0 && b != banks);
 	banks = b;
 	if (!mce_banks) {
-		int err = mce_banks_init();
+		int err = __mcheck_cpu_mce_banks_init();
 
 		if (err)
 			return err;
@@ -1244,7 +1258,7 @@
 	return 0;
 }
 
-static void mce_init(void)
+static void __mcheck_cpu_init_generic(void)
 {
 	mce_banks_t all_banks;
 	u64 cap;
@@ -1273,7 +1287,7 @@
 }
 
 /* Add per CPU specific workarounds here */
-static int __cpuinit mce_cpu_quirks(struct cpuinfo_x86 *c)
+static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 {
 	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
 		pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
@@ -1341,7 +1355,7 @@
 	return 0;
 }
 
-static void __cpuinit mce_ancient_init(struct cpuinfo_x86 *c)
+static void __cpuinit __mcheck_cpu_ancient_init(struct cpuinfo_x86 *c)
 {
 	if (c->x86 != 5)
 		return;
@@ -1355,7 +1369,7 @@
 	}
 }
 
-static void mce_cpu_features(struct cpuinfo_x86 *c)
+static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 {
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
@@ -1369,7 +1383,7 @@
 	}
 }
 
-static void mce_init_timer(void)
+static void __mcheck_cpu_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
 	int *n = &__get_cpu_var(mce_next_interval);
@@ -1380,7 +1394,7 @@
 	*n = check_interval * HZ;
 	if (!*n)
 		return;
-	setup_timer(t, mcheck_timer, smp_processor_id());
+	setup_timer(t, mce_start_timer, smp_processor_id());
 	t->expires = round_jiffies(jiffies + *n);
 	add_timer_on(t, smp_processor_id());
 }
@@ -1400,27 +1414,28 @@
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off:
  */
-void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
+void __cpuinit mcheck_cpu_init(struct cpuinfo_x86 *c)
 {
 	if (mce_disabled)
 		return;
 
-	mce_ancient_init(c);
+	__mcheck_cpu_ancient_init(c);
 
 	if (!mce_available(c))
 		return;
 
-	if (mce_cap_init() < 0 || mce_cpu_quirks(c) < 0) {
+	if (__mcheck_cpu_cap_init() < 0 || __mcheck_cpu_apply_quirks(c) < 0) {
 		mce_disabled = 1;
 		return;
 	}
 
 	machine_check_vector = do_machine_check;
 
-	mce_init();
-	mce_cpu_features(c);
-	mce_init_timer();
+	__mcheck_cpu_init_generic();
+	__mcheck_cpu_init_vendor(c);
+	__mcheck_cpu_init_timer();
 	INIT_WORK(&__get_cpu_var(mce_work), mce_process_work);
+
 }
 
 /*
@@ -1640,6 +1655,15 @@
 }
 __setup("mce", mcheck_enable);
 
+int __init mcheck_init(void)
+{
+	atomic_notifier_chain_register(&x86_mce_decoder_chain, &mce_dec_nb);
+
+	mcheck_intel_therm_init();
+
+	return 0;
+}
+
 /*
  * Sysfs support
  */
@@ -1648,7 +1672,7 @@
  * Disable machine checks on suspend and shutdown. We can't really handle
  * them later.
  */
-static int mce_disable(void)
+static int mce_disable_error_reporting(void)
 {
 	int i;
 
@@ -1663,12 +1687,12 @@
 
 static int mce_suspend(struct sys_device *dev, pm_message_t state)
 {
-	return mce_disable();
+	return mce_disable_error_reporting();
 }
 
 static int mce_shutdown(struct sys_device *dev)
 {
-	return mce_disable();
+	return mce_disable_error_reporting();
 }
 
 /*
@@ -1678,8 +1702,8 @@
  */
 static int mce_resume(struct sys_device *dev)
 {
-	mce_init();
-	mce_cpu_features(&current_cpu_data);
+	__mcheck_cpu_init_generic();
+	__mcheck_cpu_init_vendor(&current_cpu_data);
 
 	return 0;
 }
@@ -1689,8 +1713,8 @@
 	del_timer_sync(&__get_cpu_var(mce_timer));
 	if (!mce_available(&current_cpu_data))
 		return;
-	mce_init();
-	mce_init_timer();
+	__mcheck_cpu_init_generic();
+	__mcheck_cpu_init_timer();
 }
 
 /* Reinit MCEs after user configuration changes */
@@ -1716,7 +1740,7 @@
 	cmci_reenable();
 	cmci_recheck();
 	if (all)
-		mce_init_timer();
+		__mcheck_cpu_init_timer();
 }
 
 static struct sysdev_class mce_sysclass = {
@@ -1929,13 +1953,14 @@
 }
 
 /* Make sure there are no machine checks on offlined CPUs. */
-static void mce_disable_cpu(void *h)
+static void __cpuinit mce_disable_cpu(void *h)
 {
 	unsigned long action = *(unsigned long *)h;
 	int i;
 
 	if (!mce_available(&current_cpu_data))
 		return;
+
 	if (!(action & CPU_TASKS_FROZEN))
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
@@ -1946,7 +1971,7 @@
 	}
 }
 
-static void mce_reenable_cpu(void *h)
+static void __cpuinit mce_reenable_cpu(void *h)
 {
 	unsigned long action = *(unsigned long *)h;
 	int i;
@@ -1991,9 +2016,11 @@
 		break;
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
-		t->expires = round_jiffies(jiffies +
+		if (!mce_ignore_ce && check_interval) {
+			t->expires = round_jiffies(jiffies +
 					   __get_cpu_var(mce_next_interval));
-		add_timer_on(t, cpu);
+			add_timer_on(t, cpu);
+		}
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;
 	case CPU_POST_DEAD:
@@ -2025,7 +2052,7 @@
 	}
 }
 
-static __init int mce_init_device(void)
+static __init int mcheck_init_device(void)
 {
 	int err;
 	int i = 0;
@@ -2053,7 +2080,7 @@
 	return err;
 }
 
-device_initcall(mce_init_device);
+device_initcall(mcheck_init_device);
 
 /*
  * Old style boot options parsing. Only for compatibility.
@@ -2101,7 +2128,7 @@
 DEFINE_SIMPLE_ATTRIBUTE(fake_panic_fops, fake_panic_get,
 			fake_panic_set, "%llu\n");
 
-static int __init mce_debugfs_init(void)
+static int __init mcheck_debugfs_init(void)
 {
 	struct dentry *dmce, *ffake_panic;
 
@@ -2115,5 +2142,5 @@
 
 	return 0;
 }
-late_initcall(mce_debugfs_init);
+late_initcall(mcheck_debugfs_init);
 #endif
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index b3a1dba..4fef985 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -49,6 +49,8 @@
 
 static atomic_t therm_throt_en	= ATOMIC_INIT(0);
 
+static u32 lvtthmr_init __read_mostly;
+
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
 	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
@@ -254,6 +256,18 @@
 	ack_APIC_irq();
 }
 
+void __init mcheck_intel_therm_init(void)
+{
+	/*
+	 * This function is only called on boot CPU. Save the init thermal
+	 * LVT value on BSP and use that value to restore APs' thermal LVT
+	 * entry BIOS programmed later
+	 */
+	if (cpu_has(&boot_cpu_data, X86_FEATURE_ACPI) &&
+		cpu_has(&boot_cpu_data, X86_FEATURE_ACC))
+		lvtthmr_init = apic_read(APIC_LVTTHMR);
+}
+
 void intel_init_thermal(struct cpuinfo_x86 *c)
 {
 	unsigned int cpu = smp_processor_id();
@@ -270,7 +284,20 @@
 	 * since it might be delivered via SMI already:
 	 */
 	rdmsr(MSR_IA32_MISC_ENABLE, l, h);
-	h = apic_read(APIC_LVTTHMR);
+
+	/*
+	 * The initial value of thermal LVT entries on all APs always reads
+	 * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI
+	 * sequence to them and LVT registers are reset to 0s except for
+	 * the mask bits which are set to 1s when APs receive INIT IPI.
+	 * Always restore the value that BIOS has programmed on AP based on
+	 * BSP's info we saved since BIOS is always setting the same value
+	 * for all threads/cores
+	 */
+	apic_write(APIC_LVTTHMR, lvtthmr_init);
+
+	h = lvtthmr_init;
+
 	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		printk(KERN_DEBUG
 		       "CPU%d: Thermal monitoring handled by SMI\n", cpu);
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 73c86db..09b1698 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -170,6 +170,41 @@
 	return start1 - start2;
 }
 
+static int __init clean_sort_range(struct res_range *range, int az)
+{
+	int i, j, k = az - 1, nr_range = 0;
+
+	for (i = 0; i < k; i++) {
+		if (range[i].end)
+			continue;
+		for (j = k; j > i; j--) {
+			if (range[j].end) {
+				k = j;
+				break;
+			}
+		}
+		if (j == i)
+			break;
+		range[i].start = range[k].start;
+		range[i].end   = range[k].end;
+		range[k].start = 0;
+		range[k].end   = 0;
+		k--;
+	}
+	/* count it */
+	for (i = 0; i < az; i++) {
+		if (!range[i].end) {
+			nr_range = i;
+			break;
+		}
+	}
+
+	/* sort them */
+	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+
+	return nr_range;
+}
+
 #define BIOS_BUG_MSG KERN_WARNING \
 	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
@@ -223,22 +258,18 @@
 		subtract_range(range, extra_remove_base,
 				 extra_remove_base + extra_remove_size  - 1);
 
-	/* get new range num */
-	nr_range = 0;
-	for (i = 0; i < RANGE_NUM; i++) {
-		if (!range[i].end)
-			continue;
-		nr_range++;
-	}
 	if  (debug_print) {
 		printk(KERN_DEBUG "After UC checking\n");
-		for (i = 0; i < nr_range; i++)
+		for (i = 0; i < RANGE_NUM; i++) {
+			if (!range[i].end)
+				continue;
 			printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n",
 				 range[i].start, range[i].end + 1);
+		}
 	}
 
 	/* sort the ranges */
-	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
+	nr_range = clean_sort_range(range, RANGE_NUM);
 	if  (debug_print) {
 		printk(KERN_DEBUG "After sorting\n");
 		for (i = 0; i < nr_range; i++)
@@ -689,8 +720,6 @@
 			continue;
 		if (!size)
 			type = MTRR_NUM_TYPES;
-		if (type == MTRR_TYPE_WRPROT)
-			type = MTRR_TYPE_UNCACHABLE;
 		num[type]++;
 	}
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index b5801c3..c1bbed1 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -77,6 +77,18 @@
 	struct debug_store	*ds;
 };
 
+struct event_constraint {
+	unsigned long	idxmsk[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	int		code;
+};
+
+#define EVENT_CONSTRAINT(c, m) { .code = (c), .idxmsk[0] = (m) }
+#define EVENT_CONSTRAINT_END  { .code = 0, .idxmsk[0] = 0 }
+
+#define for_each_event_constraint(e, c) \
+	for ((e) = (c); (e)->idxmsk[0]; (e)++)
+
+
 /*
  * struct x86_pmu - generic x86 pmu
  */
@@ -102,6 +114,8 @@
 	u64		intel_ctrl;
 	void		(*enable_bts)(u64 config);
 	void		(*disable_bts)(void);
+	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
+					 struct hw_perf_event *hwc);
 };
 
 static struct x86_pmu x86_pmu __read_mostly;
@@ -110,6 +124,8 @@
 	.enabled = 1,
 };
 
+static const struct event_constraint *event_constraints;
+
 /*
  * Not sure about some of these
  */
@@ -155,6 +171,16 @@
 	return hw_event & P6_EVNTSEL_MASK;
 }
 
+static const struct event_constraint intel_p6_event_constraints[] =
+{
+	EVENT_CONSTRAINT(0xc1, 0x1),	/* FLOPS */
+	EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
+	EVENT_CONSTRAINT(0x11, 0x1),	/* FP_ASSIST */
+	EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
+	EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
+	EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
+	EVENT_CONSTRAINT_END
+};
 
 /*
  * Intel PerfMon v3. Used on Core2 and later.
@@ -170,6 +196,35 @@
   [PERF_COUNT_HW_BUS_CYCLES]		= 0x013c,
 };
 
+static const struct event_constraint intel_core_event_constraints[] =
+{
+	EVENT_CONSTRAINT(0x10, 0x1),	/* FP_COMP_OPS_EXE */
+	EVENT_CONSTRAINT(0x11, 0x2),	/* FP_ASSIST */
+	EVENT_CONSTRAINT(0x12, 0x2),	/* MUL */
+	EVENT_CONSTRAINT(0x13, 0x2),	/* DIV */
+	EVENT_CONSTRAINT(0x14, 0x1),	/* CYCLES_DIV_BUSY */
+	EVENT_CONSTRAINT(0x18, 0x1),	/* IDLE_DURING_DIV */
+	EVENT_CONSTRAINT(0x19, 0x2),	/* DELAYED_BYPASS */
+	EVENT_CONSTRAINT(0xa1, 0x1),	/* RS_UOPS_DISPATCH_CYCLES */
+	EVENT_CONSTRAINT(0xcb, 0x1),	/* MEM_LOAD_RETIRED */
+	EVENT_CONSTRAINT_END
+};
+
+static const struct event_constraint intel_nehalem_event_constraints[] =
+{
+	EVENT_CONSTRAINT(0x40, 0x3),	/* L1D_CACHE_LD */
+	EVENT_CONSTRAINT(0x41, 0x3),	/* L1D_CACHE_ST */
+	EVENT_CONSTRAINT(0x42, 0x3),	/* L1D_CACHE_LOCK */
+	EVENT_CONSTRAINT(0x43, 0x3),	/* L1D_ALL_REF */
+	EVENT_CONSTRAINT(0x4e, 0x3),	/* L1D_PREFETCH */
+	EVENT_CONSTRAINT(0x4c, 0x3),	/* LOAD_HIT_PRE */
+	EVENT_CONSTRAINT(0x51, 0x3),	/* L1D */
+	EVENT_CONSTRAINT(0x52, 0x3),	/* L1D_CACHE_PREFETCH_LOCK_FB_HIT */
+	EVENT_CONSTRAINT(0x53, 0x3),	/* L1D_CACHE_LOCK_FB_HIT */
+	EVENT_CONSTRAINT(0xc5, 0x3),	/* CACHE_LOCK_CYCLES */
+	EVENT_CONSTRAINT_END
+};
+
 static u64 intel_pmu_event_map(int hw_event)
 {
 	return intel_perfmon_event_map[hw_event];
@@ -190,7 +245,7 @@
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX];
 
-static const u64 nehalem_hw_cache_event_ids
+static __initconst u64 nehalem_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -281,7 +336,7 @@
  },
 };
 
-static const u64 core2_hw_cache_event_ids
+static __initconst u64 core2_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -372,7 +427,7 @@
  },
 };
 
-static const u64 atom_hw_cache_event_ids
+static __initconst u64 atom_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -469,7 +524,7 @@
 #define CORE_EVNTSEL_UNIT_MASK		0x0000FF00ULL
 #define CORE_EVNTSEL_EDGE_MASK		0x00040000ULL
 #define CORE_EVNTSEL_INV_MASK		0x00800000ULL
-#define CORE_EVNTSEL_REG_MASK	0xFF000000ULL
+#define CORE_EVNTSEL_REG_MASK		0xFF000000ULL
 
 #define CORE_EVNTSEL_MASK		\
 	(CORE_EVNTSEL_EVENT_MASK |	\
@@ -481,7 +536,7 @@
 	return hw_event & CORE_EVNTSEL_MASK;
 }
 
-static const u64 amd_hw_cache_event_ids
+static __initconst u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
 				[PERF_COUNT_HW_CACHE_RESULT_MAX] =
@@ -932,6 +987,8 @@
 	 */
 	hwc->config = ARCH_PERFMON_EVENTSEL_INT;
 
+	hwc->idx = -1;
+
 	/*
 	 * Count user and OS events unless requested not to.
 	 */
@@ -1334,8 +1391,7 @@
 		x86_pmu_enable_event(hwc, idx);
 }
 
-static int
-fixed_mode_idx(struct perf_event *event, struct hw_perf_event *hwc)
+static int fixed_mode_idx(struct hw_perf_event *hwc)
 {
 	unsigned int hw_event;
 
@@ -1349,6 +1405,12 @@
 	if (!x86_pmu.num_events_fixed)
 		return -1;
 
+	/*
+	 * fixed counters do not take all possible filters
+	 */
+	if (hwc->config & ARCH_PERFMON_EVENT_FILTER_MASK)
+		return -1;
+
 	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
 		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
 	if (unlikely(hw_event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
@@ -1360,22 +1422,57 @@
 }
 
 /*
- * Find a PMC slot for the freshly enabled / scheduled in event:
+ * generic counter allocator: get next free counter
  */
-static int x86_pmu_enable(struct perf_event *event)
+static int
+gen_get_event_idx(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	struct hw_perf_event *hwc = &event->hw;
 	int idx;
 
-	idx = fixed_mode_idx(event, hwc);
+	idx = find_first_zero_bit(cpuc->used_mask, x86_pmu.num_events);
+	return idx == x86_pmu.num_events ? -1 : idx;
+}
+
+/*
+ * intel-specific counter allocator: check event constraints
+ */
+static int
+intel_get_event_idx(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
+{
+	const struct event_constraint *event_constraint;
+	int i, code;
+
+	if (!event_constraints)
+		goto skip;
+
+	code = hwc->config & CORE_EVNTSEL_EVENT_MASK;
+
+	for_each_event_constraint(event_constraint, event_constraints) {
+		if (code == event_constraint->code) {
+			for_each_bit(i, event_constraint->idxmsk, X86_PMC_IDX_MAX) {
+				if (!test_and_set_bit(i, cpuc->used_mask))
+					return i;
+			}
+			return -1;
+		}
+	}
+skip:
+	return gen_get_event_idx(cpuc, hwc);
+}
+
+static int
+x86_schedule_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc)
+{
+	int idx;
+
+	idx = fixed_mode_idx(hwc);
 	if (idx == X86_PMC_IDX_FIXED_BTS) {
 		/* BTS is already occupied. */
 		if (test_and_set_bit(idx, cpuc->used_mask))
 			return -EAGAIN;
 
 		hwc->config_base	= 0;
-		hwc->event_base	= 0;
+		hwc->event_base		= 0;
 		hwc->idx		= idx;
 	} else if (idx >= 0) {
 		/*
@@ -1396,20 +1493,35 @@
 	} else {
 		idx = hwc->idx;
 		/* Try to get the previous generic event again */
-		if (test_and_set_bit(idx, cpuc->used_mask)) {
+		if (idx == -1 || test_and_set_bit(idx, cpuc->used_mask)) {
 try_generic:
-			idx = find_first_zero_bit(cpuc->used_mask,
-						  x86_pmu.num_events);
-			if (idx == x86_pmu.num_events)
+			idx = x86_pmu.get_event_idx(cpuc, hwc);
+			if (idx == -1)
 				return -EAGAIN;
 
 			set_bit(idx, cpuc->used_mask);
 			hwc->idx = idx;
 		}
-		hwc->config_base  = x86_pmu.eventsel;
-		hwc->event_base = x86_pmu.perfctr;
+		hwc->config_base = x86_pmu.eventsel;
+		hwc->event_base  = x86_pmu.perfctr;
 	}
 
+	return idx;
+}
+
+/*
+ * Find a PMC slot for the freshly enabled / scheduled in event:
+ */
+static int x86_pmu_enable(struct perf_event *event)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct hw_perf_event *hwc = &event->hw;
+	int idx;
+
+	idx = x86_schedule_event(cpuc, hwc);
+	if (idx < 0)
+		return idx;
+
 	perf_events_lapic_init();
 
 	x86_pmu.disable(hwc, idx);
@@ -1852,7 +1964,7 @@
 	.priority		= 1
 };
 
-static struct x86_pmu p6_pmu = {
+static __initconst struct x86_pmu p6_pmu = {
 	.name			= "p6",
 	.handle_irq		= p6_pmu_handle_irq,
 	.disable_all		= p6_pmu_disable_all,
@@ -1877,9 +1989,10 @@
 	 */
 	.event_bits		= 32,
 	.event_mask		= (1ULL << 32) - 1,
+	.get_event_idx		= intel_get_event_idx,
 };
 
-static struct x86_pmu intel_pmu = {
+static __initconst struct x86_pmu intel_pmu = {
 	.name			= "Intel",
 	.handle_irq		= intel_pmu_handle_irq,
 	.disable_all		= intel_pmu_disable_all,
@@ -1900,9 +2013,10 @@
 	.max_period		= (1ULL << 31) - 1,
 	.enable_bts		= intel_pmu_enable_bts,
 	.disable_bts		= intel_pmu_disable_bts,
+	.get_event_idx		= intel_get_event_idx,
 };
 
-static struct x86_pmu amd_pmu = {
+static __initconst struct x86_pmu amd_pmu = {
 	.name			= "AMD",
 	.handle_irq		= amd_pmu_handle_irq,
 	.disable_all		= amd_pmu_disable_all,
@@ -1920,9 +2034,10 @@
 	.apic			= 1,
 	/* use highest bit to detect overflow */
 	.max_period		= (1ULL << 47) - 1,
+	.get_event_idx		= gen_get_event_idx,
 };
 
-static int p6_pmu_init(void)
+static __init int p6_pmu_init(void)
 {
 	switch (boot_cpu_data.x86_model) {
 	case 1:
@@ -1932,10 +2047,12 @@
 	case 7:
 	case 8:
 	case 11: /* Pentium III */
+		event_constraints = intel_p6_event_constraints;
 		break;
 	case 9:
 	case 13:
 		/* Pentium M */
+		event_constraints = intel_p6_event_constraints;
 		break;
 	default:
 		pr_cont("unsupported p6 CPU model %d ",
@@ -1954,7 +2071,7 @@
 	return 0;
 }
 
-static int intel_pmu_init(void)
+static __init int intel_pmu_init(void)
 {
 	union cpuid10_edx edx;
 	union cpuid10_eax eax;
@@ -2007,12 +2124,14 @@
 		       sizeof(hw_cache_event_ids));
 
 		pr_cont("Core2 events, ");
+		event_constraints = intel_core_event_constraints;
 		break;
 	default:
 	case 26:
 		memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
+		event_constraints = intel_nehalem_event_constraints;
 		pr_cont("Nehalem/Corei7 events, ");
 		break;
 	case 28:
@@ -2025,7 +2144,7 @@
 	return 0;
 }
 
-static int amd_pmu_init(void)
+static __init int amd_pmu_init(void)
 {
 	/* Performance-monitoring supported from K7 and later: */
 	if (boot_cpu_data.x86 < 6)
@@ -2105,11 +2224,47 @@
 	.unthrottle	= x86_pmu_unthrottle,
 };
 
+static int
+validate_event(struct cpu_hw_events *cpuc, struct perf_event *event)
+{
+	struct hw_perf_event fake_event = event->hw;
+
+	if (event->pmu && event->pmu != &pmu)
+		return 0;
+
+	return x86_schedule_event(cpuc, &fake_event) >= 0;
+}
+
+static int validate_group(struct perf_event *event)
+{
+	struct perf_event *sibling, *leader = event->group_leader;
+	struct cpu_hw_events fake_pmu;
+
+	memset(&fake_pmu, 0, sizeof(fake_pmu));
+
+	if (!validate_event(&fake_pmu, leader))
+		return -ENOSPC;
+
+	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+		if (!validate_event(&fake_pmu, sibling))
+			return -ENOSPC;
+	}
+
+	if (!validate_event(&fake_pmu, event))
+		return -ENOSPC;
+
+	return 0;
+}
+
 const struct pmu *hw_perf_event_init(struct perf_event *event)
 {
 	int err;
 
 	err = __hw_perf_event_init(event);
+	if (!err) {
+		if (event->group_leader != event)
+			err = validate_group(event);
+	}
 	if (err) {
 		if (event->destroy)
 			event->destroy(event);
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index fab786f..898df97 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -712,7 +712,7 @@
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
 		if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15 &&
-		    boot_cpu_data.x86 != 16)
+		    boot_cpu_data.x86 != 16 && boot_cpu_data.x86 != 17)
 			return;
 		wd_ops = &k7_wd_ops;
 		break;
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index bb62b3e..2800074 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -26,7 +26,7 @@
 
 	early_init_transmeta(c);
 
-	display_cacheinfo(c);
+	cpu_detect_cache_sizes(c);
 
 	/* Print CMS and CPU revision */
 	max = cpuid_eax(0x80860000);
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 6a52d4b..7ef24a7 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -116,21 +116,16 @@
 {
 	unsigned int cpu;
 	struct cpuinfo_x86 *c;
-	int ret = 0;
-
-	lock_kernel();
 
 	cpu = iminor(file->f_path.dentry->d_inode);
-	if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
-		ret = -ENXIO;	/* No such CPU */
-		goto out;
-	}
+	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
+		return -ENXIO;	/* No such CPU */
+
 	c = &cpu_data(cpu);
 	if (c->cpuid_level < 0)
-		ret = -EIO;	/* CPUID not supported */
-out:
-	unlock_kernel();
-	return ret;
+		return -EIO;	/* CPUID not supported */
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 5e409dc..a4849c1 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -27,8 +27,7 @@
 #include <asm/cpu.h>
 #include <asm/reboot.h>
 #include <asm/virtext.h>
-#include <asm/iommu.h>
-
+#include <asm/x86_init.h>
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
 
@@ -106,7 +105,7 @@
 #endif
 
 #ifdef CONFIG_X86_64
-	pci_iommu_shutdown();
+	x86_platform.iommu_shutdown();
 #endif
 
 	crash_save_cpu(regs, safe_smp_processor_id());
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 2d8a371..b8ce165 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -268,11 +268,12 @@
 
 	show_registers(regs);
 #ifdef CONFIG_X86_32
-	sp = (unsigned long) (&regs->sp);
-	savesegment(ss, ss);
-	if (user_mode(regs)) {
+	if (user_mode_vm(regs)) {
 		sp = regs->sp;
 		ss = regs->ss & 0xffff;
+	} else {
+		sp = kernel_stack_pointer(regs);
+		savesegment(ss, ss);
 	}
 	printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
 	print_symbol("%s", regs->ip);
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index f7dd2a7..e0ed4c7 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -10,9 +10,9 @@
 #include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/kexec.h>
+#include <linux/sysfs.h>
 #include <linux/bug.h>
 #include <linux/nmi.h>
-#include <linux/sysfs.h>
 
 #include <asm/stacktrace.h>
 
@@ -35,6 +35,7 @@
 
 	if (!stack) {
 		unsigned long dummy;
+
 		stack = &dummy;
 		if (task && task != current)
 			stack = (unsigned long *)task->thread.sp;
@@ -57,8 +58,7 @@
 
 		context = (struct thread_info *)
 			((unsigned long)stack & (~(THREAD_SIZE - 1)));
-		bp = print_context_stack(context, stack, bp, ops,
-					 data, NULL, &graph);
+		bp = print_context_stack(context, stack, bp, ops, data, NULL, &graph);
 
 		stack = (unsigned long *)context->previous_esp;
 		if (!stack)
@@ -72,7 +72,7 @@
 
 void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl)
+		   unsigned long *sp, unsigned long bp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
@@ -156,4 +156,3 @@
 
 	return ud2 == 0x0b0f;
 }
-
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index a071e6b..8e74093 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -10,26 +10,28 @@
 #include <linux/module.h>
 #include <linux/ptrace.h>
 #include <linux/kexec.h>
+#include <linux/sysfs.h>
 #include <linux/bug.h>
 #include <linux/nmi.h>
-#include <linux/sysfs.h>
 
 #include <asm/stacktrace.h>
 
 #include "dumpstack.h"
 
+#define N_EXCEPTION_STACKS_END \
+		(N_EXCEPTION_STACKS + DEBUG_STKSZ/EXCEPTION_STKSZ - 2)
 
 static char x86_stack_ids[][8] = {
-		[DEBUG_STACK - 1] = "#DB",
-		[NMI_STACK - 1] = "NMI",
-		[DOUBLEFAULT_STACK - 1] = "#DF",
-		[STACKFAULT_STACK - 1] = "#SS",
-		[MCE_STACK - 1] = "#MC",
+		[ DEBUG_STACK-1			]	= "#DB",
+		[ NMI_STACK-1			]	= "NMI",
+		[ DOUBLEFAULT_STACK-1		]	= "#DF",
+		[ STACKFAULT_STACK-1		]	= "#SS",
+		[ MCE_STACK-1			]	= "#MC",
 #if DEBUG_STKSZ > EXCEPTION_STKSZ
-		[N_EXCEPTION_STACKS ...
-			N_EXCEPTION_STACKS + DEBUG_STKSZ / EXCEPTION_STKSZ - 2] = "#DB[?]"
+		[ N_EXCEPTION_STACKS ...
+		  N_EXCEPTION_STACKS_END	]	= "#DB[?]"
 #endif
-	};
+};
 
 int x86_is_stack_id(int id, char *name)
 {
@@ -37,7 +39,7 @@
 }
 
 static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack,
-					unsigned *usedp, char **idp)
+					 unsigned *usedp, char **idp)
 {
 	unsigned k;
 
@@ -202,21 +204,24 @@
 
 void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl)
+		   unsigned long *sp, unsigned long bp, char *log_lvl)
 {
+	unsigned long *irq_stack_end;
+	unsigned long *irq_stack;
 	unsigned long *stack;
+	int cpu;
 	int i;
-	const int cpu = smp_processor_id();
-	unsigned long *irq_stack_end =
-		(unsigned long *)(per_cpu(irq_stack_ptr, cpu));
-	unsigned long *irq_stack =
-		(unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE);
+
+	preempt_disable();
+	cpu = smp_processor_id();
+
+	irq_stack_end	= (unsigned long *)(per_cpu(irq_stack_ptr, cpu));
+	irq_stack	= (unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE);
 
 	/*
-	 * debugging aid: "show_stack(NULL, NULL);" prints the
-	 * back trace for this cpu.
+	 * Debugging aid: "show_stack(NULL, NULL);" prints the
+	 * back trace for this cpu:
 	 */
-
 	if (sp == NULL) {
 		if (task)
 			sp = (unsigned long *)task->thread.sp;
@@ -240,6 +245,8 @@
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
+	preempt_enable();
+
 	printk("\n");
 	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
@@ -303,4 +310,3 @@
 
 	return ud2 == 0x0b0f;
 }
-
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index c097e7d..50b9c22 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -334,6 +334,10 @@
 END(ret_from_fork)
 
 /*
+ * Interrupt exit functions should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
+/*
  * Return to user mode is not as complex as all this looks,
  * but we want the default path for a system call return to
  * go as quickly as possible which is why some of this is
@@ -383,6 +387,10 @@
 END(resume_kernel)
 #endif
 	CFI_ENDPROC
+/*
+ * End of kprobes section
+ */
+	.popsection
 
 /* SYSENTER_RETURN points to after the "sysenter" instruction in
    the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
@@ -513,6 +521,10 @@
 	PTGS_TO_GS_EX
 ENDPROC(ia32_sysenter_target)
 
+/*
+ * syscall stub including irq exit should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
 	# system call handler stub
 ENTRY(system_call)
 	RING0_INT_FRAME			# can't unwind into user space anyway
@@ -705,6 +717,10 @@
 	jmp resume_userspace
 END(syscall_badsys)
 	CFI_ENDPROC
+/*
+ * End of kprobes section
+ */
+	.popsection
 
 /*
  * System calls that need a pt_regs pointer.
@@ -814,6 +830,10 @@
 ENDPROC(common_interrupt)
 	CFI_ENDPROC
 
+/*
+ *  Irq entries should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
 #define BUILD_INTERRUPT3(name, nr, fn)	\
 ENTRY(name)				\
 	RING0_INT_FRAME;		\
@@ -980,6 +1000,10 @@
 	jmp error_code
 	CFI_ENDPROC
 END(spurious_interrupt_bug)
+/*
+ * End of kprobes section
+ */
+	.popsection
 
 ENTRY(kernel_thread_helper)
 	pushl $0		# fake return address for unwinder
@@ -1185,17 +1209,14 @@
 
 .globl return_to_handler
 return_to_handler:
-	pushl $0
 	pushl %eax
-	pushl %ecx
 	pushl %edx
 	movl %ebp, %eax
 	call ftrace_return_to_handler
-	movl %eax, 0xc(%esp)
+	movl %eax, %ecx
 	popl %edx
-	popl %ecx
 	popl %eax
-	ret
+	jmp *%ecx
 #endif
 
 .section .rodata,"a"
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b5c061f..63bca79 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -155,11 +155,11 @@
 
 	call ftrace_return_to_handler
 
-	movq %rax, 16(%rsp)
+	movq %rax, %rdi
 	movq 8(%rsp), %rdx
 	movq (%rsp), %rax
-	addq $16, %rsp
-	retq
+	addq $24, %rsp
+	jmp *%rdi
 #endif
 
 
@@ -803,6 +803,10 @@
 	call \func
 	.endm
 
+/*
+ * Interrupt entry/exit should be protected against kprobes
+ */
+	.pushsection .kprobes.text, "ax"
 	/*
 	 * The interrupt stubs push (~vector+0x80) onto the stack and
 	 * then jump to common_interrupt.
@@ -941,6 +945,10 @@
 
 	CFI_ENDPROC
 END(common_interrupt)
+/*
+ * End of kprobes section
+ */
+       .popsection
 
 /*
  * APIC interrupts.
@@ -969,8 +977,8 @@
 #endif
 apicinterrupt LOCAL_TIMER_VECTOR \
 	apic_timer_interrupt smp_apic_timer_interrupt
-apicinterrupt GENERIC_INTERRUPT_VECTOR \
-	generic_interrupt smp_generic_interrupt
+apicinterrupt X86_PLATFORM_IPI_VECTOR \
+	x86_platform_ipi smp_x86_platform_ipi
 
 #ifdef CONFIG_SMP
 apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
@@ -1491,12 +1499,17 @@
 	leaq irq_return(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
 	je error_swapgs
-	movl %ecx,%ecx	/* zero extend */
-	cmpq %rcx,RIP+8(%rsp)
-	je error_swapgs
+	movl %ecx,%eax	/* zero extend */
+	cmpq %rax,RIP+8(%rsp)
+	je bstep_iret
 	cmpq $gs_change,RIP+8(%rsp)
 	je error_swapgs
 	jmp error_sti
+
+bstep_iret:
+	/* Fix truncated RIP */
+	movq %rcx,RIP+8(%rsp)
+	jmp error_swapgs
 END(error_entry)
 
 
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 9dbb527..3096892 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -9,6 +9,8 @@
  * the dangers of modifying code on the run.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/spinlock.h>
 #include <linux/hardirq.h>
 #include <linux/uaccess.h>
@@ -187,9 +189,26 @@
 	nmi_wait_count++;
 }
 
+static inline int
+within(unsigned long addr, unsigned long start, unsigned long end)
+{
+	return addr >= start && addr < end;
+}
+
 static int
 do_ftrace_mod_code(unsigned long ip, void *new_code)
 {
+	/*
+	 * On x86_64, kernel text mappings are mapped read-only with
+	 * CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
+	 * of the kernel text mapping to modify the kernel text.
+	 *
+	 * For 32bit kernels, these mappings are same and we can use
+	 * kernel identity mapping to modify code.
+	 */
+	if (within(ip, (unsigned long)_text, (unsigned long)_etext))
+		ip = (unsigned long)__va(__pa(ip));
+
 	mod_code_ip = (void *)ip;
 	mod_code_newcode = new_code;
 
@@ -336,15 +355,15 @@
 
 	switch (faulted) {
 	case 0:
-		pr_info("ftrace: converting mcount calls to 0f 1f 44 00 00\n");
+		pr_info("converting mcount calls to 0f 1f 44 00 00\n");
 		memcpy(ftrace_nop, ftrace_test_p6nop, MCOUNT_INSN_SIZE);
 		break;
 	case 1:
-		pr_info("ftrace: converting mcount calls to 66 66 66 66 90\n");
+		pr_info("converting mcount calls to 66 66 66 66 90\n");
 		memcpy(ftrace_nop, ftrace_test_nop5, MCOUNT_INSN_SIZE);
 		break;
 	case 2:
-		pr_info("ftrace: converting mcount calls to jmp . + 5\n");
+		pr_info("converting mcount calls to jmp . + 5\n");
 		memcpy(ftrace_nop, ftrace_test_jmp, MCOUNT_INSN_SIZE);
 		break;
 	}
@@ -468,82 +487,10 @@
 
 #ifdef CONFIG_FTRACE_SYSCALLS
 
-extern unsigned long __start_syscalls_metadata[];
-extern unsigned long __stop_syscalls_metadata[];
 extern unsigned long *sys_call_table;
 
-static struct syscall_metadata **syscalls_metadata;
-
-static struct syscall_metadata *find_syscall_meta(unsigned long *syscall)
+unsigned long __init arch_syscall_addr(int nr)
 {
-	struct syscall_metadata *start;
-	struct syscall_metadata *stop;
-	char str[KSYM_SYMBOL_LEN];
-
-
-	start = (struct syscall_metadata *)__start_syscalls_metadata;
-	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
-	kallsyms_lookup((unsigned long) syscall, NULL, NULL, NULL, str);
-
-	for ( ; start < stop; start++) {
-		if (start->name && !strcmp(start->name, str))
-			return start;
-	}
-	return NULL;
+	return (unsigned long)(&sys_call_table)[nr];
 }
-
-struct syscall_metadata *syscall_nr_to_meta(int nr)
-{
-	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
-		return NULL;
-
-	return syscalls_metadata[nr];
-}
-
-int syscall_name_to_nr(char *name)
-{
-	int i;
-
-	if (!syscalls_metadata)
-		return -1;
-
-	for (i = 0; i < NR_syscalls; i++) {
-		if (syscalls_metadata[i]) {
-			if (!strcmp(syscalls_metadata[i]->name, name))
-				return i;
-		}
-	}
-	return -1;
-}
-
-void set_syscall_enter_id(int num, int id)
-{
-	syscalls_metadata[num]->enter_id = id;
-}
-
-void set_syscall_exit_id(int num, int id)
-{
-	syscalls_metadata[num]->exit_id = id;
-}
-
-static int __init arch_init_ftrace_syscalls(void)
-{
-	int i;
-	struct syscall_metadata *meta;
-	unsigned long **psys_syscall_table = &sys_call_table;
-
-	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
-					NR_syscalls, GFP_KERNEL);
-	if (!syscalls_metadata) {
-		WARN_ON(1);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < NR_syscalls; i++) {
-		meta = find_syscall_meta(psys_syscall_table[i]);
-		syscalls_metadata[i] = meta;
-	}
-	return 0;
-}
-arch_initcall(arch_init_ftrace_syscalls);
 #endif
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 050c278..7fd318b 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -18,6 +18,8 @@
 #include <asm/asm-offsets.h>
 #include <asm/setup.h>
 #include <asm/processor-flags.h>
+#include <asm/msr-index.h>
+#include <asm/cpufeature.h>
 #include <asm/percpu.h>
 
 /* Physical address */
@@ -297,25 +299,27 @@
 	orl %edx,%eax
 	movl %eax,%cr4
 
-	btl $5, %eax		# check if PAE is enabled
-	jnc 6f
+	testb $X86_CR4_PAE, %al		# check if PAE is enabled
+	jz 6f
 
 	/* Check if extended functions are implemented */
 	movl $0x80000000, %eax
 	cpuid
-	cmpl $0x80000000, %eax
-	jbe 6f
+	/* Value must be in the range 0x80000001 to 0x8000ffff */
+	subl $0x80000001, %eax
+	cmpl $(0x8000ffff-0x80000001), %eax
+	ja 6f
 	mov $0x80000001, %eax
 	cpuid
 	/* Execute Disable bit supported? */
-	btl $20, %edx
+	btl $(X86_FEATURE_NX & 31), %edx
 	jnc 6f
 
 	/* Setup EFER (Extended Feature Enable Register) */
-	movl $0xc0000080, %ecx
+	movl $MSR_EFER, %ecx
 	rdmsr
 
-	btsl $11, %eax
+	btsl $_EFER_NX, %eax
 	/* Make changes effective */
 	wrmsr
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 780cd92..2d8b503 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -212,8 +212,8 @@
 	 */
 	lgdt	early_gdt_descr(%rip)
 
-	/* set up data segments. actually 0 would do too */
-	movl $__KERNEL_DS,%eax
+	/* set up data segments */
+	xorl %eax,%eax
 	movl %eax,%ds
 	movl %eax,%ss
 	movl %eax,%es
@@ -262,11 +262,11 @@
 	.quad	x86_64_start_kernel
 	ENTRY(initial_gs)
 	.quad	INIT_PER_CPU_VAR(irq_stack_union)
-	__FINITDATA
 
 	ENTRY(stack_start)
 	.quad  init_thread_union+THREAD_SIZE-8
 	.word  0
+	__FINITDATA
 
 bad_address:
 	jmp bad_address
@@ -340,6 +340,7 @@
 	i = i + 1 ;					\
 	.endr
 
+	.data
 	/*
 	 * This default setting generates an ident mapping at address 0x100000
 	 * and a mapping for the kernel that precisely maps virtual address
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
new file mode 100644
index 0000000..d42f65a
--- /dev/null
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -0,0 +1,555 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 Alan Stern
+ * Copyright (C) 2009 IBM Corporation
+ * Copyright (C) 2009 Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Authors: Alan Stern <stern@rowland.harvard.edu>
+ *          K.Prasad <prasad@linux.vnet.ibm.com>
+ *          Frederic Weisbecker <fweisbec@gmail.com>
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ */
+
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/kallsyms.h>
+#include <linux/kprobes.h>
+#include <linux/percpu.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/hw_breakpoint.h>
+#include <asm/processor.h>
+#include <asm/debugreg.h>
+
+/* Per cpu debug control register value */
+DEFINE_PER_CPU(unsigned long, cpu_dr7);
+EXPORT_PER_CPU_SYMBOL(cpu_dr7);
+
+/* Per cpu debug address registers values */
+static DEFINE_PER_CPU(unsigned long, cpu_debugreg[HBP_NUM]);
+
+/*
+ * Stores the breakpoints currently in use on each breakpoint address
+ * register for each cpus
+ */
+static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);
+
+
+static inline unsigned long
+__encode_dr7(int drnum, unsigned int len, unsigned int type)
+{
+	unsigned long bp_info;
+
+	bp_info = (len | type) & 0xf;
+	bp_info <<= (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
+	bp_info |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));
+
+	return bp_info;
+}
+
+/*
+ * Encode the length, type, Exact, and Enable bits for a particular breakpoint
+ * as stored in debug register 7.
+ */
+unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type)
+{
+	return __encode_dr7(drnum, len, type) | DR_GLOBAL_SLOWDOWN;
+}
+
+/*
+ * Decode the length and type bits for a particular breakpoint as
+ * stored in debug register 7.  Return the "enabled" status.
+ */
+int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type)
+{
+	int bp_info = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);
+
+	*len = (bp_info & 0xc) | 0x40;
+	*type = (bp_info & 0x3) | 0x80;
+
+	return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
+}
+
+/*
+ * Install a perf counter breakpoint.
+ *
+ * We seek a free debug address register and use it for this
+ * breakpoint. Eventually we enable it in the debug control register.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned long *dr7;
+	int i;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+		if (!*slot) {
+			*slot = bp;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
+		return -EBUSY;
+
+	set_debugreg(info->address, i);
+	__get_cpu_var(cpu_debugreg[i]) = info->address;
+
+	dr7 = &__get_cpu_var(cpu_dr7);
+	*dr7 |= encode_dr7(i, info->len, info->type);
+
+	set_debugreg(*dr7, 7);
+
+	return 0;
+}
+
+/*
+ * Uninstall the breakpoint contained in the given counter.
+ *
+ * First we search the debug address register it uses and then we disable
+ * it.
+ *
+ * Atomic: we hold the counter->ctx->lock and we only handle variables
+ * and registers local to this cpu.
+ */
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned long *dr7;
+	int i;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+
+		if (*slot == bp) {
+			*slot = NULL;
+			break;
+		}
+	}
+
+	if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
+		return;
+
+	dr7 = &__get_cpu_var(cpu_dr7);
+	*dr7 &= ~__encode_dr7(i, info->len, info->type);
+
+	set_debugreg(*dr7, 7);
+}
+
+static int get_hbp_len(u8 hbp_len)
+{
+	unsigned int len_in_bytes = 0;
+
+	switch (hbp_len) {
+	case X86_BREAKPOINT_LEN_1:
+		len_in_bytes = 1;
+		break;
+	case X86_BREAKPOINT_LEN_2:
+		len_in_bytes = 2;
+		break;
+	case X86_BREAKPOINT_LEN_4:
+		len_in_bytes = 4;
+		break;
+#ifdef CONFIG_X86_64
+	case X86_BREAKPOINT_LEN_8:
+		len_in_bytes = 8;
+		break;
+#endif
+	}
+	return len_in_bytes;
+}
+
+/*
+ * Check for virtual address in user space.
+ */
+int arch_check_va_in_userspace(unsigned long va, u8 hbp_len)
+{
+	unsigned int len;
+
+	len = get_hbp_len(hbp_len);
+
+	return (va <= TASK_SIZE - len);
+}
+
+/*
+ * Check for virtual address in kernel space.
+ */
+static int arch_check_va_in_kernelspace(unsigned long va, u8 hbp_len)
+{
+	unsigned int len;
+
+	len = get_hbp_len(hbp_len);
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Store a breakpoint's encoded address, length, and type.
+ */
+static int arch_store_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	/*
+	 * For kernel-addresses, either the address or symbol name can be
+	 * specified.
+	 */
+	if (info->name)
+		info->address = (unsigned long)
+				kallsyms_lookup_name(info->name);
+	if (info->address)
+		return 0;
+
+	return -EINVAL;
+}
+
+int arch_bp_generic_fields(int x86_len, int x86_type,
+			   int *gen_len, int *gen_type)
+{
+	/* Len */
+	switch (x86_len) {
+	case X86_BREAKPOINT_LEN_1:
+		*gen_len = HW_BREAKPOINT_LEN_1;
+		break;
+	case X86_BREAKPOINT_LEN_2:
+		*gen_len = HW_BREAKPOINT_LEN_2;
+		break;
+	case X86_BREAKPOINT_LEN_4:
+		*gen_len = HW_BREAKPOINT_LEN_4;
+		break;
+#ifdef CONFIG_X86_64
+	case X86_BREAKPOINT_LEN_8:
+		*gen_len = HW_BREAKPOINT_LEN_8;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (x86_type) {
+	case X86_BREAKPOINT_EXECUTE:
+		*gen_type = HW_BREAKPOINT_X;
+		break;
+	case X86_BREAKPOINT_WRITE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case X86_BREAKPOINT_RW:
+		*gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	info->address = bp->attr.bp_addr;
+
+	/* Len */
+	switch (bp->attr.bp_len) {
+	case HW_BREAKPOINT_LEN_1:
+		info->len = X86_BREAKPOINT_LEN_1;
+		break;
+	case HW_BREAKPOINT_LEN_2:
+		info->len = X86_BREAKPOINT_LEN_2;
+		break;
+	case HW_BREAKPOINT_LEN_4:
+		info->len = X86_BREAKPOINT_LEN_4;
+		break;
+#ifdef CONFIG_X86_64
+	case HW_BREAKPOINT_LEN_8:
+		info->len = X86_BREAKPOINT_LEN_8;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_W:
+		info->type = X86_BREAKPOINT_WRITE;
+		break;
+	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+		info->type = X86_BREAKPOINT_RW;
+		break;
+	case HW_BREAKPOINT_X:
+		info->type = X86_BREAKPOINT_EXECUTE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+/*
+ * Validate the arch-specific HW Breakpoint register settings
+ */
+int arch_validate_hwbkpt_settings(struct perf_event *bp,
+				  struct task_struct *tsk)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned int align;
+	int ret;
+
+
+	ret = arch_build_bp_info(bp);
+	if (ret)
+		return ret;
+
+	ret = -EINVAL;
+
+	if (info->type == X86_BREAKPOINT_EXECUTE)
+		/*
+		 * Ptrace-refactoring code
+		 * For now, we'll allow instruction breakpoint only for user-space
+		 * addresses
+		 */
+		if ((!arch_check_va_in_userspace(info->address, info->len)) &&
+			info->len != X86_BREAKPOINT_EXECUTE)
+			return ret;
+
+	switch (info->len) {
+	case X86_BREAKPOINT_LEN_1:
+		align = 0;
+		break;
+	case X86_BREAKPOINT_LEN_2:
+		align = 1;
+		break;
+	case X86_BREAKPOINT_LEN_4:
+		align = 3;
+		break;
+#ifdef CONFIG_X86_64
+	case X86_BREAKPOINT_LEN_8:
+		align = 7;
+		break;
+#endif
+	default:
+		return ret;
+	}
+
+	if (bp->callback)
+		ret = arch_store_info(bp);
+
+	if (ret < 0)
+		return ret;
+	/*
+	 * Check that the low-order bits of the address are appropriate
+	 * for the alignment implied by len.
+	 */
+	if (info->address & align)
+		return -EINVAL;
+
+	/* Check that the virtual address is in the proper range */
+	if (tsk) {
+		if (!arch_check_va_in_userspace(info->address, info->len))
+			return -EFAULT;
+	} else {
+		if (!arch_check_va_in_kernelspace(info->address, info->len))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*
+ * Dump the debug register contents to the user.
+ * We can't dump our per cpu values because it
+ * may contain cpu wide breakpoint, something that
+ * doesn't belong to the current task.
+ *
+ * TODO: include non-ptrace user breakpoints (perf)
+ */
+void aout_dump_debugregs(struct user *dump)
+{
+	int i;
+	int dr7 = 0;
+	struct perf_event *bp;
+	struct arch_hw_breakpoint *info;
+	struct thread_struct *thread = &current->thread;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		bp = thread->ptrace_bps[i];
+
+		if (bp && !bp->attr.disabled) {
+			dump->u_debugreg[i] = bp->attr.bp_addr;
+			info = counter_arch_bp(bp);
+			dr7 |= encode_dr7(i, info->len, info->type);
+		} else {
+			dump->u_debugreg[i] = 0;
+		}
+	}
+
+	dump->u_debugreg[4] = 0;
+	dump->u_debugreg[5] = 0;
+	dump->u_debugreg[6] = current->thread.debugreg6;
+
+	dump->u_debugreg[7] = dr7;
+}
+EXPORT_SYMBOL_GPL(aout_dump_debugregs);
+
+/*
+ * Release the user breakpoints used by ptrace
+ */
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		unregister_hw_breakpoint(t->ptrace_bps[i]);
+		t->ptrace_bps[i] = NULL;
+	}
+}
+
+void hw_breakpoint_restore(void)
+{
+	set_debugreg(__get_cpu_var(cpu_debugreg[0]), 0);
+	set_debugreg(__get_cpu_var(cpu_debugreg[1]), 1);
+	set_debugreg(__get_cpu_var(cpu_debugreg[2]), 2);
+	set_debugreg(__get_cpu_var(cpu_debugreg[3]), 3);
+	set_debugreg(current->thread.debugreg6, 6);
+	set_debugreg(__get_cpu_var(cpu_dr7), 7);
+}
+EXPORT_SYMBOL_GPL(hw_breakpoint_restore);
+
+/*
+ * Handle debug exception notifications.
+ *
+ * Return value is either NOTIFY_STOP or NOTIFY_DONE as explained below.
+ *
+ * NOTIFY_DONE returned if one of the following conditions is true.
+ * i) When the causative address is from user-space and the exception
+ * is a valid one, i.e. not triggered as a result of lazy debug register
+ * switching
+ * ii) When there are more bits than trap<n> set in DR6 register (such
+ * as BD, BS or BT) indicating that more than one debug condition is
+ * met and requires some more action in do_debug().
+ *
+ * NOTIFY_STOP returned for all other cases
+ *
+ */
+static int __kprobes hw_breakpoint_handler(struct die_args *args)
+{
+	int i, cpu, rc = NOTIFY_STOP;
+	struct perf_event *bp;
+	unsigned long dr7, dr6;
+	unsigned long *dr6_p;
+
+	/* The DR6 value is pointed by args->err */
+	dr6_p = (unsigned long *)ERR_PTR(args->err);
+	dr6 = *dr6_p;
+
+	/* Do an early return if no trap bits are set in DR6 */
+	if ((dr6 & DR_TRAP_BITS) == 0)
+		return NOTIFY_DONE;
+
+	get_debugreg(dr7, 7);
+	/* Disable breakpoints during exception handling */
+	set_debugreg(0UL, 7);
+	/*
+	 * Assert that local interrupts are disabled
+	 * Reset the DRn bits in the virtualized register value.
+	 * The ptrace trigger routine will add in whatever is needed.
+	 */
+	current->thread.debugreg6 &= ~DR_TRAP_BITS;
+	cpu = get_cpu();
+
+	/* Handle all the breakpoints that were triggered */
+	for (i = 0; i < HBP_NUM; ++i) {
+		if (likely(!(dr6 & (DR_TRAP0 << i))))
+			continue;
+
+		/*
+		 * The counter may be concurrently released but that can only
+		 * occur from a call_rcu() path. We can then safely fetch
+		 * the breakpoint, use its callback, touch its counter
+		 * while we are in an rcu_read_lock() path.
+		 */
+		rcu_read_lock();
+
+		bp = per_cpu(bp_per_reg[i], cpu);
+		if (bp)
+			rc = NOTIFY_DONE;
+		/*
+		 * Reset the 'i'th TRAP bit in dr6 to denote completion of
+		 * exception handling
+		 */
+		(*dr6_p) &= ~(DR_TRAP0 << i);
+		/*
+		 * bp can be NULL due to lazy debug register switching
+		 * or due to concurrent perf counter removing.
+		 */
+		if (!bp) {
+			rcu_read_unlock();
+			break;
+		}
+
+		(bp->callback)(bp, args->regs);
+
+		rcu_read_unlock();
+	}
+	if (dr6 & (~DR_TRAP_BITS))
+		rc = NOTIFY_DONE;
+
+	set_debugreg(dr7, 7);
+	put_cpu();
+
+	return rc;
+}
+
+/*
+ * Handle debug exception notifications.
+ */
+int __kprobes hw_breakpoint_exceptions_notify(
+		struct notifier_block *unused, unsigned long val, void *data)
+{
+	if (val != DIE_DEBUG)
+		return NOTIFY_DONE;
+
+	return hw_breakpoint_handler(data);
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+	/* TODO */
+}
+
+void hw_breakpoint_pmu_unthrottle(struct perf_event *bp)
+{
+	/* TODO */
+}
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 04bbd52..664bcb7 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -18,7 +18,7 @@
 atomic_t irq_err_count;
 
 /* Function pointer for generic interrupt vector handling */
-void (*generic_interrupt_extension)(void) = NULL;
+void (*x86_platform_ipi_callback)(void) = NULL;
 
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
@@ -72,10 +72,10 @@
 		seq_printf(p, "%10u ", irq_stats(j)->apic_pending_irqs);
 	seq_printf(p, "  Performance pending work\n");
 #endif
-	if (generic_interrupt_extension) {
+	if (x86_platform_ipi_callback) {
 		seq_printf(p, "%*s: ", prec, "PLT");
 		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", irq_stats(j)->generic_irqs);
+			seq_printf(p, "%10u ", irq_stats(j)->x86_platform_ipis);
 		seq_printf(p, "  Platform interrupts\n");
 	}
 #ifdef CONFIG_SMP
@@ -92,17 +92,17 @@
 		seq_printf(p, "%10u ", irq_stats(j)->irq_tlb_count);
 	seq_printf(p, "  TLB shootdowns\n");
 #endif
-#ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	seq_printf(p, "%*s: ", prec, "TRM");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_thermal_count);
 	seq_printf(p, "  Thermal event interrupts\n");
-# ifdef CONFIG_X86_MCE_THRESHOLD
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	seq_printf(p, "%*s: ", prec, "THR");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_threshold_count);
 	seq_printf(p, "  Threshold APIC interrupts\n");
-# endif
 #endif
 #ifdef CONFIG_X86_MCE
 	seq_printf(p, "%*s: ", prec, "MCE");
@@ -187,18 +187,18 @@
 	sum += irq_stats(cpu)->apic_perf_irqs;
 	sum += irq_stats(cpu)->apic_pending_irqs;
 #endif
-	if (generic_interrupt_extension)
-		sum += irq_stats(cpu)->generic_irqs;
+	if (x86_platform_ipi_callback)
+		sum += irq_stats(cpu)->x86_platform_ipis;
 #ifdef CONFIG_SMP
 	sum += irq_stats(cpu)->irq_resched_count;
 	sum += irq_stats(cpu)->irq_call_count;
 	sum += irq_stats(cpu)->irq_tlb_count;
 #endif
-#ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	sum += irq_stats(cpu)->irq_thermal_count;
-# ifdef CONFIG_X86_MCE_THRESHOLD
+#endif
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	sum += irq_stats(cpu)->irq_threshold_count;
-# endif
 #endif
 #ifdef CONFIG_X86_MCE
 	sum += per_cpu(mce_exception_count, cpu);
@@ -251,9 +251,9 @@
 }
 
 /*
- * Handler for GENERIC_INTERRUPT_VECTOR.
+ * Handler for X86_PLATFORM_IPI_VECTOR.
  */
-void smp_generic_interrupt(struct pt_regs *regs)
+void smp_x86_platform_ipi(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -263,10 +263,10 @@
 
 	irq_enter();
 
-	inc_irq_stat(generic_irqs);
+	inc_irq_stat(x86_platform_ipis);
 
-	if (generic_interrupt_extension)
-		generic_interrupt_extension();
+	if (x86_platform_ipi_callback)
+		x86_platform_ipi_callback();
 
 	irq_exit();
 
@@ -274,3 +274,93 @@
 }
 
 EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
+
+#ifdef CONFIG_HOTPLUG_CPU
+/* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
+void fixup_irqs(void)
+{
+	unsigned int irq, vector;
+	static int warned;
+	struct irq_desc *desc;
+
+	for_each_irq_desc(irq, desc) {
+		int break_affinity = 0;
+		int set_affinity = 1;
+		const struct cpumask *affinity;
+
+		if (!desc)
+			continue;
+		if (irq == 2)
+			continue;
+
+		/* interrupt's are disabled at this point */
+		spin_lock(&desc->lock);
+
+		affinity = desc->affinity;
+		if (!irq_has_action(irq) ||
+		    cpumask_equal(affinity, cpu_online_mask)) {
+			spin_unlock(&desc->lock);
+			continue;
+		}
+
+		/*
+		 * Complete the irq move. This cpu is going down and for
+		 * non intr-remapping case, we can't wait till this interrupt
+		 * arrives at this cpu before completing the irq move.
+		 */
+		irq_force_complete_move(irq);
+
+		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+			break_affinity = 1;
+			affinity = cpu_all_mask;
+		}
+
+		if (!(desc->status & IRQ_MOVE_PCNTXT) && desc->chip->mask)
+			desc->chip->mask(irq);
+
+		if (desc->chip->set_affinity)
+			desc->chip->set_affinity(irq, affinity);
+		else if (!(warned++))
+			set_affinity = 0;
+
+		if (!(desc->status & IRQ_MOVE_PCNTXT) && desc->chip->unmask)
+			desc->chip->unmask(irq);
+
+		spin_unlock(&desc->lock);
+
+		if (break_affinity && set_affinity)
+			printk("Broke affinity for irq %i\n", irq);
+		else if (!set_affinity)
+			printk("Cannot set affinity for irq %i\n", irq);
+	}
+
+	/*
+	 * We can remove mdelay() and then send spuriuous interrupts to
+	 * new cpu targets for all the irqs that were handled previously by
+	 * this cpu. While it works, I have seen spurious interrupt messages
+	 * (nothing wrong but still...).
+	 *
+	 * So for now, retain mdelay(1) and check the IRR and then send those
+	 * interrupts to new targets as this cpu is already offlined...
+	 */
+	mdelay(1);
+
+	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
+		unsigned int irr;
+
+		if (__get_cpu_var(vector_irq)[vector] < 0)
+			continue;
+
+		irr = apic_read(APIC_IRR + (vector / 32 * 0x10));
+		if (irr  & (1 << (vector % 32))) {
+			irq = __get_cpu_var(vector_irq)[vector];
+
+			desc = irq_to_desc(irq);
+			spin_lock(&desc->lock);
+			if (desc->chip->retrigger)
+				desc->chip->retrigger(irq);
+			spin_unlock(&desc->lock);
+		}
+	}
+}
+#endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 7d35d0f..10709f2 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -211,48 +211,3 @@
 
 	return true;
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
-void fixup_irqs(void)
-{
-	unsigned int irq;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(irq, desc) {
-		const struct cpumask *affinity;
-
-		if (!desc)
-			continue;
-		if (irq == 2)
-			continue;
-
-		affinity = desc->affinity;
-		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-			printk("Breaking affinity for irq %i\n", irq);
-			affinity = cpu_all_mask;
-		}
-		if (desc->chip->set_affinity)
-			desc->chip->set_affinity(irq, affinity);
-		else if (desc->action)
-			printk_once("Cannot set affinity for irq %i\n", irq);
-	}
-
-#if 0
-	barrier();
-	/* Ingo Molnar says: "after the IO-APIC masks have been redirected
-	   [note the nop - the interrupt-enable boundary on x86 is two
-	   instructions from sti] - to flush out pending hardirqs and
-	   IPIs. After this point nothing is supposed to reach this CPU." */
-	__asm__ __volatile__("sti; nop; cli");
-	barrier();
-#else
-	/* That doesn't seem sufficient.  Give it 1ms. */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-#endif
-}
-#endif
-
diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c
index 977d8b4..acf8fbf 100644
--- a/arch/x86/kernel/irq_64.c
+++ b/arch/x86/kernel/irq_64.c
@@ -62,64 +62,6 @@
 	return true;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-/* A cpu has been removed from cpu_online_mask.  Reset irq affinities. */
-void fixup_irqs(void)
-{
-	unsigned int irq;
-	static int warned;
-	struct irq_desc *desc;
-
-	for_each_irq_desc(irq, desc) {
-		int break_affinity = 0;
-		int set_affinity = 1;
-		const struct cpumask *affinity;
-
-		if (!desc)
-			continue;
-		if (irq == 2)
-			continue;
-
-		/* interrupt's are disabled at this point */
-		spin_lock(&desc->lock);
-
-		affinity = desc->affinity;
-		if (!irq_has_action(irq) ||
-		    cpumask_equal(affinity, cpu_online_mask)) {
-			spin_unlock(&desc->lock);
-			continue;
-		}
-
-		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-			break_affinity = 1;
-			affinity = cpu_all_mask;
-		}
-
-		if (desc->chip->mask)
-			desc->chip->mask(irq);
-
-		if (desc->chip->set_affinity)
-			desc->chip->set_affinity(irq, affinity);
-		else if (!(warned++))
-			set_affinity = 0;
-
-		if (desc->chip->unmask)
-			desc->chip->unmask(irq);
-
-		spin_unlock(&desc->lock);
-
-		if (break_affinity && set_affinity)
-			printk("Broke affinity for irq %i\n", irq);
-		else if (!set_affinity)
-			printk("Cannot set affinity for irq %i\n", irq);
-	}
-
-	/* That doesn't seem sufficient.  Give it 1ms. */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-}
-#endif
 
 extern void call_softirq(void);
 
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 40f3077..d593222 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -200,8 +200,8 @@
 	/* self generated IPI for local APIC timer */
 	alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
 
-	/* generic IPI for platform specific use */
-	alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
+	/* IPI for X86 platform specific use */
+	alloc_intr_gate(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi);
 
 	/* IPI vectors for APIC spurious and error interrupts */
 	alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8d82a77..20a5b36 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -43,6 +43,7 @@
 #include <linux/smp.h>
 #include <linux/nmi.h>
 
+#include <asm/debugreg.h>
 #include <asm/apicdef.h>
 #include <asm/system.h>
 
@@ -88,7 +89,6 @@
 	gdb_regs[GDB_SS]	= __KERNEL_DS;
 	gdb_regs[GDB_FS]	= 0xFFFF;
 	gdb_regs[GDB_GS]	= 0xFFFF;
-	gdb_regs[GDB_SP]	= (int)&regs->sp;
 #else
 	gdb_regs[GDB_R8]	= regs->r8;
 	gdb_regs[GDB_R9]	= regs->r9;
@@ -101,8 +101,8 @@
 	gdb_regs32[GDB_PS]	= regs->flags;
 	gdb_regs32[GDB_CS]	= regs->cs;
 	gdb_regs32[GDB_SS]	= regs->ss;
-	gdb_regs[GDB_SP]	= regs->sp;
 #endif
+	gdb_regs[GDB_SP]	= kernel_stack_pointer(regs);
 }
 
 /**
@@ -434,6 +434,11 @@
 			"resuming...\n");
 	kgdb_arch_handle_exception(args->trapnr, args->signr,
 				   args->err, "c", "", regs);
+	/*
+	 * Reset the BS bit in dr6 (pointed by args->err) to
+	 * denote completion of processing
+	 */
+	(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 
 	return NOTIFY_STOP;
 }
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 7b5169d..1f3186c 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -48,31 +48,22 @@
 #include <linux/preempt.h>
 #include <linux/module.h>
 #include <linux/kdebug.h>
+#include <linux/kallsyms.h>
 
 #include <asm/cacheflush.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/alternative.h>
+#include <asm/insn.h>
+#include <asm/debugreg.h>
 
 void jprobe_return_end(void);
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
-#ifdef CONFIG_X86_64
-#define stack_addr(regs) ((unsigned long *)regs->sp)
-#else
-/*
- * "&regs->sp" looks wrong, but it's correct for x86_32.  x86_32 CPUs
- * don't save the ss and esp registers if the CPU is already in kernel
- * mode when it traps.  So for kprobes, regs->sp and regs->ss are not
- * the [nonexistent] saved stack pointer and ss register, but rather
- * the top 8 bytes of the pre-int3 stack.  So &regs->sp happens to
- * point to the top of the pre-int3 stack.
- */
-#define stack_addr(regs) ((unsigned long *)&regs->sp)
-#endif
+#define stack_addr(regs) ((unsigned long *)kernel_stack_pointer(regs))
 
 #define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
 	(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) |   \
@@ -106,50 +97,6 @@
 	/*      -----------------------------------------------         */
 	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
 };
-static const u32 onebyte_has_modrm[256 / 32] = {
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-	/*      -----------------------------------------------         */
-	W(0x00, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 00 */
-	W(0x10, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) , /* 10 */
-	W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 20 */
-	W(0x30, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) , /* 30 */
-	W(0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 40 */
-	W(0x50, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 50 */
-	W(0x60, 0, 0, 1, 1, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0) | /* 60 */
-	W(0x70, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 70 */
-	W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
-	W(0x90, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 90 */
-	W(0xa0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* a0 */
-	W(0xb0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* b0 */
-	W(0xc0, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0) | /* c0 */
-	W(0xd0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
-	W(0xe0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* e0 */
-	W(0xf0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1)   /* f0 */
-	/*      -----------------------------------------------         */
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-};
-static const u32 twobyte_has_modrm[256 / 32] = {
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-	/*      -----------------------------------------------         */
-	W(0x00, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1) | /* 0f */
-	W(0x10, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0) , /* 1f */
-	W(0x20, 1, 1, 1, 1, 1, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 2f */
-	W(0x30, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 3f */
-	W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 4f */
-	W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 5f */
-	W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 6f */
-	W(0x70, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 1, 1, 1, 1) , /* 7f */
-	W(0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 8f */
-	W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 9f */
-	W(0xa0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1) | /* af */
-	W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1) , /* bf */
-	W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0) | /* cf */
-	W(0xd0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* df */
-	W(0xe0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* ef */
-	W(0xf0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0)   /* ff */
-	/*      -----------------------------------------------         */
-	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f          */
-};
 #undef W
 
 struct kretprobe_blackpoint kretprobe_blacklist[] = {
@@ -244,6 +191,75 @@
 	}
 }
 
+/* Recover the probed instruction at addr for further analysis. */
+static int recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr)
+{
+	struct kprobe *kp;
+	kp = get_kprobe((void *)addr);
+	if (!kp)
+		return -EINVAL;
+
+	/*
+	 *  Basically, kp->ainsn.insn has an original instruction.
+	 *  However, RIP-relative instruction can not do single-stepping
+	 *  at different place, fix_riprel() tweaks the displacement of
+	 *  that instruction. In that case, we can't recover the instruction
+	 *  from the kp->ainsn.insn.
+	 *
+	 *  On the other hand, kp->opcode has a copy of the first byte of
+	 *  the probed instruction, which is overwritten by int3. And
+	 *  the instruction at kp->addr is not modified by kprobes except
+	 *  for the first byte, we can recover the original instruction
+	 *  from it and kp->opcode.
+	 */
+	memcpy(buf, kp->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	buf[0] = kp->opcode;
+	return 0;
+}
+
+/* Dummy buffers for kallsyms_lookup */
+static char __dummy_buf[KSYM_NAME_LEN];
+
+/* Check if paddr is at an instruction boundary */
+static int __kprobes can_probe(unsigned long paddr)
+{
+	int ret;
+	unsigned long addr, offset = 0;
+	struct insn insn;
+	kprobe_opcode_t buf[MAX_INSN_SIZE];
+
+	if (!kallsyms_lookup(paddr, NULL, &offset, NULL, __dummy_buf))
+		return 0;
+
+	/* Decode instructions */
+	addr = paddr - offset;
+	while (addr < paddr) {
+		kernel_insn_init(&insn, (void *)addr);
+		insn_get_opcode(&insn);
+
+		/*
+		 * Check if the instruction has been modified by another
+		 * kprobe, in which case we replace the breakpoint by the
+		 * original instruction in our buffer.
+		 */
+		if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
+			ret = recover_probed_instruction(buf, addr);
+			if (ret)
+				/*
+				 * Another debugging subsystem might insert
+				 * this breakpoint. In that case, we can't
+				 * recover it.
+				 */
+				return 0;
+			kernel_insn_init(&insn, buf);
+		}
+		insn_get_length(&insn);
+		addr += insn.length;
+	}
+
+	return (addr == paddr);
+}
+
 /*
  * Returns non-zero if opcode modifies the interrupt flag.
  */
@@ -277,68 +293,30 @@
 static void __kprobes fix_riprel(struct kprobe *p)
 {
 #ifdef CONFIG_X86_64
-	u8 *insn = p->ainsn.insn;
-	s64 disp;
-	int need_modrm;
+	struct insn insn;
+	kernel_insn_init(&insn, p->ainsn.insn);
 
-	/* Skip legacy instruction prefixes.  */
-	while (1) {
-		switch (*insn) {
-		case 0x66:
-		case 0x67:
-		case 0x2e:
-		case 0x3e:
-		case 0x26:
-		case 0x64:
-		case 0x65:
-		case 0x36:
-		case 0xf0:
-		case 0xf3:
-		case 0xf2:
-			++insn;
-			continue;
-		}
-		break;
-	}
-
-	/* Skip REX instruction prefix.  */
-	if (is_REX_prefix(insn))
-		++insn;
-
-	if (*insn == 0x0f) {
-		/* Two-byte opcode.  */
-		++insn;
-		need_modrm = test_bit(*insn,
-				      (unsigned long *)twobyte_has_modrm);
-	} else
-		/* One-byte opcode.  */
-		need_modrm = test_bit(*insn,
-				      (unsigned long *)onebyte_has_modrm);
-
-	if (need_modrm) {
-		u8 modrm = *++insn;
-		if ((modrm & 0xc7) == 0x05) {
-			/* %rip+disp32 addressing mode */
-			/* Displacement follows ModRM byte.  */
-			++insn;
-			/*
-			 * The copied instruction uses the %rip-relative
-			 * addressing mode.  Adjust the displacement for the
-			 * difference between the original location of this
-			 * instruction and the location of the copy that will
-			 * actually be run.  The tricky bit here is making sure
-			 * that the sign extension happens correctly in this
-			 * calculation, since we need a signed 32-bit result to
-			 * be sign-extended to 64 bits when it's added to the
-			 * %rip value and yield the same 64-bit result that the
-			 * sign-extension of the original signed 32-bit
-			 * displacement would have given.
-			 */
-			disp = (u8 *) p->addr + *((s32 *) insn) -
-			       (u8 *) p->ainsn.insn;
-			BUG_ON((s64) (s32) disp != disp); /* Sanity check.  */
-			*(s32 *)insn = (s32) disp;
-		}
+	if (insn_rip_relative(&insn)) {
+		s64 newdisp;
+		u8 *disp;
+		insn_get_displacement(&insn);
+		/*
+		 * The copied instruction uses the %rip-relative addressing
+		 * mode.  Adjust the displacement for the difference between
+		 * the original location of this instruction and the location
+		 * of the copy that will actually be run.  The tricky bit here
+		 * is making sure that the sign extension happens correctly in
+		 * this calculation, since we need a signed 32-bit result to
+		 * be sign-extended to 64 bits when it's added to the %rip
+		 * value and yield the same 64-bit result that the sign-
+		 * extension of the original signed 32-bit displacement would
+		 * have given.
+		 */
+		newdisp = (u8 *) p->addr + (s64) insn.displacement.value -
+			  (u8 *) p->ainsn.insn;
+		BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check.  */
+		disp = (u8 *) p->ainsn.insn + insn_offset_displacement(&insn);
+		*(s32 *) disp = (s32) newdisp;
 	}
 #endif
 }
@@ -359,6 +337,8 @@
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
+	if (!can_probe((unsigned long)p->addr))
+		return -EILSEQ;
 	/* insn: must be on special executable page on x86. */
 	p->ainsn.insn = get_insn_slot();
 	if (!p->ainsn.insn)
@@ -472,17 +452,6 @@
 {
 	switch (kcb->kprobe_status) {
 	case KPROBE_HIT_SSDONE:
-#ifdef CONFIG_X86_64
-		/* TODO: Provide re-entrancy from post_kprobes_handler() and
-		 * avoid exception stack corruption while single-stepping on
-		 * the instruction of the new probe.
-		 */
-		arch_disarm_kprobe(p);
-		regs->ip = (unsigned long)p->addr;
-		reset_current_kprobe();
-		preempt_enable_no_resched();
-		break;
-#endif
 	case KPROBE_HIT_ACTIVE:
 		save_previous_kprobe(kcb);
 		set_current_kprobe(p, regs, kcb);
@@ -491,18 +460,16 @@
 		kcb->kprobe_status = KPROBE_REENTER;
 		break;
 	case KPROBE_HIT_SS:
-		if (p == kprobe_running()) {
-			regs->flags &= ~X86_EFLAGS_TF;
-			regs->flags |= kcb->kprobe_saved_flags;
-			return 0;
-		} else {
-			/* A probe has been hit in the codepath leading up
-			 * to, or just after, single-stepping of a probed
-			 * instruction. This entire codepath should strictly
-			 * reside in .kprobes.text section. Raise a warning
-			 * to highlight this peculiar case.
-			 */
-		}
+		/* A probe has been hit in the codepath leading up to, or just
+		 * after, single-stepping of a probed instruction. This entire
+		 * codepath should strictly reside in .kprobes.text section.
+		 * Raise a BUG or we'll continue in an endless reentering loop
+		 * and eventually a stack overflow.
+		 */
+		printk(KERN_WARNING "Unrecoverable kprobe detected at %p.\n",
+		       p->addr);
+		dump_kprobe(p);
+		BUG();
 	default:
 		/* impossible cases */
 		WARN_ON(1);
@@ -967,8 +934,14 @@
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_DEBUG:
-		if (post_kprobe_handler(args->regs))
+		if (post_kprobe_handler(args->regs)) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
 			ret = NOTIFY_STOP;
+		}
 		break;
 	case DIE_GPF:
 		/*
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index c1c429d..a3fa43b 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -25,6 +25,7 @@
 #include <asm/desc.h>
 #include <asm/system.h>
 #include <asm/cacheflush.h>
+#include <asm/debugreg.h>
 
 static void set_idt(void *newidt, __u16 limit)
 {
@@ -157,8 +158,7 @@
 {
 	int error;
 
-	if (nx_enabled)
-		set_pages_x(image->control_code_page, 1);
+	set_pages_x(image->control_code_page, 1);
 	error = machine_kexec_alloc_page_tables(image);
 	if (error)
 		return error;
@@ -172,8 +172,7 @@
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
-	if (nx_enabled)
-		set_pages_nx(image->control_code_page, 1);
+	set_pages_nx(image->control_code_page, 1);
 	machine_kexec_free_page_tables(image);
 }
 
@@ -202,6 +201,7 @@
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 84c3bf20..4a8bb82 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -18,6 +18,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
+#include <asm/debugreg.h>
 
 static int init_one_level2_page(struct kimage *image, pgd_t *pgd,
 				unsigned long addr)
@@ -282,6 +283,7 @@
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
+	hw_breakpoint_disable();
 
 	if (image->preserve_context) {
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index f4c538b..63123d9 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -33,6 +33,9 @@
 #define UCODE_EQUIV_CPU_TABLE_TYPE 0x00000000
 #define UCODE_UCODE_TYPE           0x00000001
 
+const struct firmware *firmware;
+static int supported_cpu;
+
 struct equiv_cpu_entry {
 	u32	installed_cpu;
 	u32	fixed_errata_mask;
@@ -71,17 +74,14 @@
 
 static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	u32 dummy;
 
-	memset(csig, 0, sizeof(*csig));
-	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		printk(KERN_WARNING "microcode: CPU%d: AMD CPU family 0x%x not "
-		       "supported\n", cpu, c->x86);
+	if (!supported_cpu)
 		return -1;
-	}
+
+	memset(csig, 0, sizeof(*csig));
 	rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
-	printk(KERN_INFO "microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
+	pr_info("microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
 	return 0;
 }
 
@@ -103,22 +103,15 @@
 		i++;
 	}
 
-	if (!equiv_cpu_id) {
-		printk(KERN_WARNING "microcode: CPU%d: cpu revision "
-		       "not listed in equivalent cpu table\n", cpu);
+	if (!equiv_cpu_id)
 		return 0;
-	}
 
-	if (mc_header->processor_rev_id != equiv_cpu_id) {
-		printk(KERN_ERR	"microcode: CPU%d: patch mismatch "
-		       "(processor_rev_id: %x, equiv_cpu_id: %x)\n",
-		       cpu, mc_header->processor_rev_id, equiv_cpu_id);
+	if (mc_header->processor_rev_id != equiv_cpu_id)
 		return 0;
-	}
 
 	/* ucode might be chipset specific -- currently we don't support this */
 	if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
-		printk(KERN_ERR "microcode: CPU%d: loading of chipset "
+		pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "
 		       "specific code not yet supported\n", cpu);
 		return 0;
 	}
@@ -148,14 +141,12 @@
 
 	/* check current patch id and patch's id for match */
 	if (rev != mc_amd->hdr.patch_id) {
-		printk(KERN_ERR "microcode: CPU%d: update failed "
+		pr_err("microcode: CPU%d: update failed "
 		       "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
 		return -1;
 	}
 
-	printk(KERN_INFO "microcode: CPU%d: updated (new patch_level=0x%x)\n",
-	       cpu, rev);
-
+	pr_info("microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
 	uci->cpu_sig.rev = rev;
 
 	return 0;
@@ -178,18 +169,15 @@
 		return NULL;
 
 	if (section_hdr[0] != UCODE_UCODE_TYPE) {
-		printk(KERN_ERR "microcode: error: invalid type field in "
+		pr_err("microcode: error: invalid type field in "
 		       "container file section header\n");
 		return NULL;
 	}
 
 	total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
 
-	printk(KERN_DEBUG "microcode: size %u, total_size %u\n",
-	       size, total_size);
-
 	if (total_size > size || total_size > UCODE_MAX_SIZE) {
-		printk(KERN_ERR "microcode: error: size mismatch\n");
+		pr_err("microcode: error: size mismatch\n");
 		return NULL;
 	}
 
@@ -218,15 +206,14 @@
 	size = buf_pos[2];
 
 	if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
-		printk(KERN_ERR "microcode: error: invalid type field in "
+		pr_err("microcode: error: invalid type field in "
 		       "container file section header\n");
 		return 0;
 	}
 
 	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
 	if (!equiv_cpu_table) {
-		printk(KERN_ERR "microcode: failed to allocate "
-		       "equivalent CPU table\n");
+		pr_err("microcode: failed to allocate equivalent CPU table\n");
 		return 0;
 	}
 
@@ -259,8 +246,7 @@
 
 	offset = install_equiv_cpu_table(ucode_ptr);
 	if (!offset) {
-		printk(KERN_ERR "microcode: failed to create "
-		       "equivalent cpu table\n");
+		pr_err("microcode: failed to create equivalent cpu table\n");
 		return UCODE_ERROR;
 	}
 
@@ -308,33 +294,27 @@
 
 static enum ucode_state request_microcode_fw(int cpu, struct device *device)
 {
-	const char *fw_name = "amd-ucode/microcode_amd.bin";
-	const struct firmware *firmware;
 	enum ucode_state ret;
 
-	if (request_firmware(&firmware, fw_name, device)) {
-		printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
+	if (firmware == NULL)
 		return UCODE_NFOUND;
-	}
 
 	if (*(u32 *)firmware->data != UCODE_MAGIC) {
-		printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n",
+		pr_err("microcode: invalid UCODE_MAGIC (0x%08x)\n",
 		       *(u32 *)firmware->data);
 		return UCODE_ERROR;
 	}
 
 	ret = generic_load_microcode(cpu, firmware->data, firmware->size);
 
-	release_firmware(firmware);
-
 	return ret;
 }
 
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	printk(KERN_INFO "microcode: AMD microcode update via "
-	       "/dev/cpu/microcode not supported\n");
+	pr_info("microcode: AMD microcode update via "
+		"/dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 
@@ -346,7 +326,32 @@
 	uci->mc = NULL;
 }
 
+void init_microcode_amd(struct device *device)
+{
+	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	WARN_ON(c->x86_vendor != X86_VENDOR_AMD);
+
+	if (c->x86 < 0x10) {
+		pr_warning("microcode: AMD CPU family 0x%x not supported\n",
+			   c->x86);
+		return;
+	}
+	supported_cpu = 1;
+
+	if (request_firmware(&firmware, fw_name, device))
+		pr_err("microcode: failed to load file %s\n", fw_name);
+}
+
+void fini_microcode_amd(void)
+{
+	release_firmware(firmware);
+}
+
 static struct microcode_ops microcode_amd_ops = {
+	.init				  = init_microcode_amd,
+	.fini				  = fini_microcode_amd,
 	.request_microcode_user           = request_microcode_user,
 	.request_microcode_fw             = request_microcode_fw,
 	.collect_cpu_info                 = collect_cpu_info_amd,
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 378e9a8..e68aae3 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -73,7 +73,6 @@
 #include <linux/platform_device.h>
 #include <linux/miscdevice.h>
 #include <linux/capability.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -201,7 +200,6 @@
 
 static int microcode_open(struct inode *unused1, struct file *unused2)
 {
-	cycle_kernel_lock();
 	return capable(CAP_SYS_RAWIO) ? 0 : -EPERM;
 }
 
@@ -393,7 +391,7 @@
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 	enum ucode_state ustate;
 
-	if (uci->valid)
+	if (uci->valid && uci->mc)
 		ustate = microcode_resume_cpu(cpu);
 	else
 		ustate = microcode_init_cpu(cpu);
@@ -520,6 +518,9 @@
 		return PTR_ERR(microcode_pdev);
 	}
 
+	if (microcode_ops->init)
+		microcode_ops->init(&microcode_pdev->dev);
+
 	get_online_cpus();
 	mutex_lock(&microcode_mutex);
 
@@ -563,6 +564,9 @@
 
 	platform_device_unregister(microcode_pdev);
 
+	if (microcode_ops->fini)
+		microcode_ops->fini();
+
 	microcode_ops = NULL;
 
 	pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 5be95ef..35a57c9 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -667,36 +667,18 @@
 	 */
 }
 
-static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
+static void __init smp_reserve_memory(struct mpf_intel *mpf)
 {
 	unsigned long size = get_mpc_size(mpf->physptr);
-#ifdef CONFIG_X86_32
-	/*
-	 * We cannot access to MPC table to compute table size yet,
-	 * as only few megabytes from the bottom is mapped now.
-	 * PC-9800's MPC table places on the very last of physical
-	 * memory; so that simply reserving PAGE_SIZE from mpf->physptr
-	 * yields BUG() in reserve_bootmem.
-	 * also need to make sure physptr is below than max_low_pfn
-	 * we don't need reserve the area above max_low_pfn
-	 */
-	unsigned long end = max_low_pfn * PAGE_SIZE;
 
-	if (mpf->physptr < end) {
-		if (mpf->physptr + size > end)
-			size = end - mpf->physptr;
-		reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-	}
-#else
-	reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT);
-#endif
+	reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
 }
 
-static int __init smp_scan_config(unsigned long base, unsigned long length,
-				  unsigned reserve)
+static int __init smp_scan_config(unsigned long base, unsigned long length)
 {
 	unsigned int *bp = phys_to_virt(base);
 	struct mpf_intel *mpf;
+	unsigned long mem;
 
 	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
 			bp, length);
@@ -717,12 +699,10 @@
 			printk(KERN_INFO "found SMP MP-table at [%p] %llx\n",
 			       mpf, (u64)virt_to_phys(mpf));
 
-			if (!reserve)
-				return 1;
-			reserve_bootmem_generic(virt_to_phys(mpf), sizeof(*mpf),
-						BOOTMEM_DEFAULT);
+			mem = virt_to_phys(mpf);
+			reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
 			if (mpf->physptr)
-				smp_reserve_bootmem(mpf);
+				smp_reserve_memory(mpf);
 
 			return 1;
 		}
@@ -732,7 +712,7 @@
 	return 0;
 }
 
-void __init default_find_smp_config(unsigned int reserve)
+void __init default_find_smp_config(void)
 {
 	unsigned int address;
 
@@ -744,9 +724,9 @@
 	 * 2) Scan the top 1K of base RAM
 	 * 3) Scan the 64K of bios
 	 */
-	if (smp_scan_config(0x0, 0x400, reserve) ||
-	    smp_scan_config(639 * 0x400, 0x400, reserve) ||
-	    smp_scan_config(0xF0000, 0x10000, reserve))
+	if (smp_scan_config(0x0, 0x400) ||
+	    smp_scan_config(639 * 0x400, 0x400) ||
+	    smp_scan_config(0xF0000, 0x10000))
 		return;
 	/*
 	 * If it is an SMP machine we should know now, unless the
@@ -767,7 +747,7 @@
 
 	address = get_bios_ebda();
 	if (address)
-		smp_scan_config(address, 0x400, reserve);
+		smp_scan_config(address, 0x400);
 }
 
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 6a3cefc..5534499 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -174,21 +174,17 @@
 {
 	unsigned int cpu = iminor(file->f_path.dentry->d_inode);
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	int ret = 0;
 
-	lock_kernel();
 	cpu = iminor(file->f_path.dentry->d_inode);
 
-	if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
-		ret = -ENXIO;	/* No such CPU */
-		goto out;
-	}
+	if (cpu >= nr_cpu_ids || !cpu_online(cpu))
+		return -ENXIO;	/* No such CPU */
+
 	c = &cpu_data(cpu);
 	if (!cpu_has(c, X86_FEATURE_MSR))
-		ret = -EIO;	/* MSR not supported */
-out:
-	unlock_kernel();
-	return ret;
+		return -EIO;	/* MSR not supported */
+
+	return 0;
 }
 
 /*
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 971a3be..c563e4c 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -46,6 +46,7 @@
 #include <asm/dma.h>
 #include <asm/rio.h>
 #include <asm/bios_ebda.h>
+#include <asm/x86_init.h>
 
 #ifdef CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT
 int use_calgary __read_mostly = 1;
@@ -244,7 +245,7 @@
 			if (panic_on_overflow)
 				panic("Calgary: fix the allocator.\n");
 			else
-				return bad_dma_address;
+				return DMA_ERROR_CODE;
 		}
 	}
 
@@ -260,12 +261,15 @@
 			      void *vaddr, unsigned int npages, int direction)
 {
 	unsigned long entry;
-	dma_addr_t ret = bad_dma_address;
+	dma_addr_t ret;
 
 	entry = iommu_range_alloc(dev, tbl, npages);
 
-	if (unlikely(entry == bad_dma_address))
-		goto error;
+	if (unlikely(entry == DMA_ERROR_CODE)) {
+		printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
+		       "iommu %p\n", npages, tbl);
+		return DMA_ERROR_CODE;
+	}
 
 	/* set the return dma address */
 	ret = (entry << PAGE_SHIFT) | ((unsigned long)vaddr & ~PAGE_MASK);
@@ -273,13 +277,7 @@
 	/* put the TCEs in the HW table */
 	tce_build(tbl, entry, npages, (unsigned long)vaddr & PAGE_MASK,
 		  direction);
-
 	return ret;
-
-error:
-	printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
-	       "iommu %p\n", npages, tbl);
-	return bad_dma_address;
 }
 
 static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
@@ -290,8 +288,8 @@
 	unsigned long flags;
 
 	/* were we called with bad_dma_address? */
-	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
-	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
+	badend = DMA_ERROR_CODE + (EMERGENCY_PAGES * PAGE_SIZE);
+	if (unlikely((dma_addr >= DMA_ERROR_CODE) && (dma_addr < badend))) {
 		WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
 		       "address 0x%Lx\n", dma_addr);
 		return;
@@ -318,13 +316,15 @@
 
 	pdev = to_pci_dev(dev);
 
+	/* search up the device tree for an iommu */
 	pbus = pdev->bus;
-
-	/* is the device behind a bridge? Look for the root bus */
-	while (pbus->parent)
+	do {
+		tbl = pci_iommu(pbus);
+		if (tbl && tbl->it_busno == pbus->number)
+			break;
+		tbl = NULL;
 		pbus = pbus->parent;
-
-	tbl = pci_iommu(pbus);
+	} while (pbus);
 
 	BUG_ON(tbl && (tbl->it_busno != pbus->number));
 
@@ -373,7 +373,7 @@
 		npages = iommu_num_pages(vaddr, s->length, PAGE_SIZE);
 
 		entry = iommu_range_alloc(dev, tbl, npages);
-		if (entry == bad_dma_address) {
+		if (entry == DMA_ERROR_CODE) {
 			/* makes sure unmap knows to stop */
 			s->dma_length = 0;
 			goto error;
@@ -391,7 +391,7 @@
 error:
 	calgary_unmap_sg(dev, sg, nelems, dir, NULL);
 	for_each_sg(sg, s, nelems, i) {
-		sg->dma_address = bad_dma_address;
+		sg->dma_address = DMA_ERROR_CODE;
 		sg->dma_length = 0;
 	}
 	return 0;
@@ -446,7 +446,7 @@
 
 	/* set up tces to cover the allocated range */
 	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-	if (mapping == bad_dma_address)
+	if (mapping == DMA_ERROR_CODE)
 		goto free;
 	*dma_handle = mapping;
 	return ret;
@@ -727,7 +727,7 @@
 	struct iommu_table *tbl = pci_iommu(dev->bus);
 
 	/* reserve EMERGENCY_PAGES from bad_dma_address and up */
-	iommu_range_reserve(tbl, bad_dma_address, EMERGENCY_PAGES);
+	iommu_range_reserve(tbl, DMA_ERROR_CODE, EMERGENCY_PAGES);
 
 	/* avoid the BIOS/VGA first 640KB-1MB region */
 	/* for CalIOC2 - avoid the entire first MB */
@@ -1344,6 +1344,23 @@
 	return;
 }
 
+static int __init calgary_iommu_init(void)
+{
+	int ret;
+
+	/* ok, we're trying to use Calgary - let's roll */
+	printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n");
+
+	ret = calgary_init();
+	if (ret) {
+		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
+		       "falling back to no_iommu\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1357,7 +1374,7 @@
 	 * if the user specified iommu=off or iommu=soft or we found
 	 * another HW IOMMU already, bail out.
 	 */
-	if (swiotlb || no_iommu || iommu_detected)
+	if (no_iommu || iommu_detected)
 		return;
 
 	if (!use_calgary)
@@ -1442,9 +1459,7 @@
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d\n",
 		       specified_table_size);
 
-		/* swiotlb for devices that aren't behind the Calgary. */
-		if (max_pfn > MAX_DMA32_PFN)
-			swiotlb = 1;
+		x86_init.iommu.iommu_init = calgary_iommu_init;
 	}
 	return;
 
@@ -1457,35 +1472,6 @@
 	}
 }
 
-int __init calgary_iommu_init(void)
-{
-	int ret;
-
-	if (no_iommu || (swiotlb && !calgary_detected))
-		return -ENODEV;
-
-	if (!calgary_detected)
-		return -ENODEV;
-
-	/* ok, we're trying to use Calgary - let's roll */
-	printk(KERN_INFO "PCI-DMA: Using Calgary IOMMU\n");
-
-	ret = calgary_init();
-	if (ret) {
-		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
-		       "falling back to no_iommu\n", ret);
-		return ret;
-	}
-
-	force_iommu = 1;
-	bad_dma_address = 0x0;
-	/* dma_ops is set to swiotlb or nommu */
-	if (!dma_ops)
-		dma_ops = &nommu_dma_ops;
-
-	return 0;
-}
-
 static int __init calgary_parse_options(char *p)
 {
 	unsigned int bridge;
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index a6e804d..afcc58b 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -11,10 +11,11 @@
 #include <asm/gart.h>
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
+#include <asm/x86_init.h>
 
 static int forbid_dac __read_mostly;
 
-struct dma_map_ops *dma_ops;
+struct dma_map_ops *dma_ops = &nommu_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -42,9 +43,6 @@
  */
 int iommu_pass_through __read_mostly;
 
-dma_addr_t bad_dma_address __read_mostly = 0;
-EXPORT_SYMBOL(bad_dma_address);
-
 /* Dummy device used for NULL arguments (normally ISA). */
 struct device x86_dma_fallback_dev = {
 	.init_name = "fallback device",
@@ -126,20 +124,17 @@
 	/* free the range so iommu could get some range less than 4G */
 	dma32_free_bootmem();
 #endif
+	if (pci_swiotlb_init())
+		return;
 
-	/*
-	 * The order of these functions is important for
-	 * fall-back/fail-over reasons
-	 */
 	gart_iommu_hole_init();
 
 	detect_calgary();
 
 	detect_intel_iommu();
 
+	/* needs to be called after gart_iommu_hole_init */
 	amd_iommu_detect();
-
-	pci_swiotlb_init();
 }
 
 void *dma_generic_alloc_coherent(struct device *dev, size_t size,
@@ -214,7 +209,7 @@
 		if (!strncmp(p, "allowdac", 8))
 			forbid_dac = 0;
 		if (!strncmp(p, "nodac", 5))
-			forbid_dac = -1;
+			forbid_dac = 1;
 		if (!strncmp(p, "usedac", 6)) {
 			forbid_dac = -1;
 			return 1;
@@ -289,25 +284,17 @@
 #ifdef CONFIG_PCI
 	dma_debug_add_bus(&pci_bus_type);
 #endif
+	x86_init.iommu.iommu_init();
 
-	calgary_iommu_init();
+	if (swiotlb) {
+		printk(KERN_INFO "PCI-DMA: "
+		       "Using software bounce buffering for IO (SWIOTLB)\n");
+		swiotlb_print_info();
+	} else
+		swiotlb_free();
 
-	intel_iommu_init();
-
-	amd_iommu_init();
-
-	gart_iommu_init();
-
-	no_iommu_init();
 	return 0;
 }
-
-void pci_iommu_shutdown(void)
-{
-	gart_iommu_shutdown();
-
-	amd_iommu_shutdown();
-}
 /* Must execute after PCI subsystem */
 rootfs_initcall(pci_iommu_init);
 
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index a7f1b64..e6a0d40 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -39,6 +39,7 @@
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 #include <asm/k8.h>
+#include <asm/x86_init.h>
 
 static unsigned long iommu_bus_base;	/* GART remapping area (physical) */
 static unsigned long iommu_size;	/* size of remapping area bytes */
@@ -46,6 +47,8 @@
 
 static u32 *iommu_gatt_base;		/* Remapping table */
 
+static dma_addr_t bad_dma_addr;
+
 /*
  * If this is disabled the IOMMU will use an optimized flushing strategy
  * of only flushing when an mapping is reused. With it true the GART is
@@ -92,7 +95,7 @@
 
 	base_index = ALIGN(iommu_bus_base & dma_get_seg_boundary(dev),
 			   PAGE_SIZE) >> PAGE_SHIFT;
-	boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
+	boundary_size = ALIGN((u64)dma_get_seg_boundary(dev) + 1,
 			      PAGE_SIZE) >> PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
@@ -216,7 +219,7 @@
 		if (panic_on_overflow)
 			panic("dma_map_area overflow %lu bytes\n", size);
 		iommu_full(dev, size, dir);
-		return bad_dma_address;
+		return bad_dma_addr;
 	}
 
 	for (i = 0; i < npages; i++) {
@@ -294,7 +297,7 @@
 	int i;
 
 #ifdef CONFIG_IOMMU_DEBUG
-	printk(KERN_DEBUG "dma_map_sg overflow\n");
+	pr_debug("dma_map_sg overflow\n");
 #endif
 
 	for_each_sg(sg, s, nents, i) {
@@ -302,7 +305,7 @@
 
 		if (nonforced_iommu(dev, addr, s->length)) {
 			addr = dma_map_area(dev, addr, s->length, dir, 0);
-			if (addr == bad_dma_address) {
+			if (addr == bad_dma_addr) {
 				if (i > 0)
 					gart_unmap_sg(dev, sg, i, dir, NULL);
 				nents = 0;
@@ -389,12 +392,14 @@
 	if (!dev)
 		dev = &x86_dma_fallback_dev;
 
-	out = 0;
-	start = 0;
-	start_sg = sgmap = sg;
-	seg_size = 0;
-	max_seg_size = dma_get_max_seg_size(dev);
-	ps = NULL; /* shut up gcc */
+	out		= 0;
+	start		= 0;
+	start_sg	= sg;
+	sgmap		= sg;
+	seg_size	= 0;
+	max_seg_size	= dma_get_max_seg_size(dev);
+	ps		= NULL; /* shut up gcc */
+
 	for_each_sg(sg, s, nents, i) {
 		dma_addr_t addr = sg_phys(s);
 
@@ -417,11 +422,12 @@
 						 sgmap, pages, need) < 0)
 					goto error;
 				out++;
-				seg_size = 0;
-				sgmap = sg_next(sgmap);
-				pages = 0;
-				start = i;
-				start_sg = s;
+
+				seg_size	= 0;
+				sgmap		= sg_next(sgmap);
+				pages		= 0;
+				start		= i;
+				start_sg	= s;
 			}
 		}
 
@@ -455,7 +461,7 @@
 
 	iommu_full(dev, pages << PAGE_SHIFT, dir);
 	for_each_sg(sg, s, nents, i)
-		s->dma_address = bad_dma_address;
+		s->dma_address = bad_dma_addr;
 	return 0;
 }
 
@@ -479,7 +485,7 @@
 				     DMA_BIDIRECTIONAL, align_mask);
 
 		flush_gart();
-		if (paddr != bad_dma_address) {
+		if (paddr != bad_dma_addr) {
 			*dma_addr = paddr;
 			return page_address(page);
 		}
@@ -499,6 +505,11 @@
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
+static int gart_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == bad_dma_addr);
+}
+
 static int no_agp;
 
 static __init unsigned long check_iommu_size(unsigned long aper, u64 aper_size)
@@ -515,7 +526,7 @@
 	iommu_size -= round_up(a, PMD_PAGE_SIZE) - a;
 
 	if (iommu_size < 64*1024*1024) {
-		printk(KERN_WARNING
+		pr_warning(
 			"PCI-DMA: Warning: Small IOMMU %luMB."
 			" Consider increasing the AGP aperture in BIOS\n",
 				iommu_size >> 20);
@@ -570,28 +581,32 @@
 	aperture_alloc = aper_alloc;
 }
 
+static void gart_fixup_northbridges(struct sys_device *dev)
+{
+	int i;
+
+	if (!fix_up_north_bridges)
+		return;
+
+	pr_info("PCI-DMA: Restoring GART aperture settings\n");
+
+	for (i = 0; i < num_k8_northbridges; i++) {
+		struct pci_dev *dev = k8_northbridges[i];
+
+		/*
+		 * Don't enable translations just yet.  That is the next
+		 * step.  Restore the pre-suspend aperture settings.
+		 */
+		pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, aperture_order << 1);
+		pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE, aperture_alloc >> 25);
+	}
+}
+
 static int gart_resume(struct sys_device *dev)
 {
-	printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n");
+	pr_info("PCI-DMA: Resuming GART IOMMU\n");
 
-	if (fix_up_north_bridges) {
-		int i;
-
-		printk(KERN_INFO "PCI-DMA: Restoring GART aperture settings\n");
-
-		for (i = 0; i < num_k8_northbridges; i++) {
-			struct pci_dev *dev = k8_northbridges[i];
-
-			/*
-			 * Don't enable translations just yet.  That is the next
-			 * step.  Restore the pre-suspend aperture settings.
-			 */
-			pci_write_config_dword(dev, AMD64_GARTAPERTURECTL,
-						aperture_order << 1);
-			pci_write_config_dword(dev, AMD64_GARTAPERTUREBASE,
-						aperture_alloc >> 25);
-		}
-	}
+	gart_fixup_northbridges(dev);
 
 	enable_gart_translations();
 
@@ -604,15 +619,14 @@
 }
 
 static struct sysdev_class gart_sysdev_class = {
-	.name = "gart",
-	.suspend = gart_suspend,
-	.resume = gart_resume,
+	.name		= "gart",
+	.suspend	= gart_suspend,
+	.resume		= gart_resume,
 
 };
 
 static struct sys_device device_gart = {
-	.id	= 0,
-	.cls	= &gart_sysdev_class,
+	.cls		= &gart_sysdev_class,
 };
 
 /*
@@ -627,7 +641,8 @@
 	void *gatt;
 	int i, error;
 
-	printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
+	pr_info("PCI-DMA: Disabling AGP.\n");
+
 	aper_size = aper_base = info->aper_size = 0;
 	dev = NULL;
 	for (i = 0; i < num_k8_northbridges; i++) {
@@ -645,6 +660,7 @@
 	}
 	if (!aper_base)
 		goto nommu;
+
 	info->aper_base = aper_base;
 	info->aper_size = aper_size >> 20;
 
@@ -667,14 +683,14 @@
 
 	flush_gart();
 
-	printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
+	pr_info("PCI-DMA: aperture base @ %x size %u KB\n",
 	       aper_base, aper_size>>10);
 
 	return 0;
 
  nommu:
 	/* Should not happen anymore */
-	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+	pr_warning("PCI-DMA: More than 4GB of RAM and no IOMMU\n"
 	       "falling back to iommu=soft.\n");
 	return -1;
 }
@@ -686,14 +702,15 @@
 	.unmap_page			= gart_unmap_page,
 	.alloc_coherent			= gart_alloc_coherent,
 	.free_coherent			= gart_free_coherent,
+	.mapping_error			= gart_mapping_error,
 };
 
-void gart_iommu_shutdown(void)
+static void gart_iommu_shutdown(void)
 {
 	struct pci_dev *dev;
 	int i;
 
-	if (no_agp && (dma_ops != &gart_dma_ops))
+	if (no_agp)
 		return;
 
 	for (i = 0; i < num_k8_northbridges; i++) {
@@ -708,7 +725,7 @@
 	}
 }
 
-void __init gart_iommu_init(void)
+int __init gart_iommu_init(void)
 {
 	struct agp_kern_info info;
 	unsigned long iommu_start;
@@ -718,7 +735,7 @@
 	long i;
 
 	if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
-		return;
+		return 0;
 
 #ifndef CONFIG_AGP_AMD64
 	no_agp = 1;
@@ -730,35 +747,28 @@
 		(agp_copy_info(agp_bridge, &info) < 0);
 #endif
 
-	if (swiotlb)
-		return;
-
-	/* Did we detect a different HW IOMMU? */
-	if (iommu_detected && !gart_iommu_aperture)
-		return;
-
 	if (no_iommu ||
 	    (!force_iommu && max_pfn <= MAX_DMA32_PFN) ||
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
 		if (max_pfn > MAX_DMA32_PFN) {
-			printk(KERN_WARNING "More than 4GB of memory "
-			       "but GART IOMMU not available.\n");
-			printk(KERN_WARNING "falling back to iommu=soft.\n");
+			pr_warning("More than 4GB of memory but GART IOMMU not available.\n");
+			pr_warning("falling back to iommu=soft.\n");
 		}
-		return;
+		return 0;
 	}
 
 	/* need to map that range */
-	aper_size = info.aper_size << 20;
-	aper_base = info.aper_base;
-	end_pfn = (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+	aper_size	= info.aper_size << 20;
+	aper_base	= info.aper_base;
+	end_pfn		= (aper_base>>PAGE_SHIFT) + (aper_size>>PAGE_SHIFT);
+
 	if (end_pfn > max_low_pfn_mapped) {
 		start_pfn = (aper_base>>PAGE_SHIFT);
 		init_memory_mapping(start_pfn<<PAGE_SHIFT, end_pfn<<PAGE_SHIFT);
 	}
 
-	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
+	pr_info("PCI-DMA: using GART IOMMU.\n");
 	iommu_size = check_iommu_size(info.aper_base, aper_size);
 	iommu_pages = iommu_size >> PAGE_SHIFT;
 
@@ -773,8 +783,7 @@
 
 		ret = dma_debug_resize_entries(iommu_pages);
 		if (ret)
-			printk(KERN_DEBUG
-			       "PCI-DMA: Cannot trace all the entries\n");
+			pr_debug("PCI-DMA: Cannot trace all the entries\n");
 	}
 #endif
 
@@ -784,15 +793,14 @@
 	 */
 	iommu_area_reserve(iommu_gart_bitmap, 0, EMERGENCY_PAGES);
 
-	agp_memory_reserved = iommu_size;
-	printk(KERN_INFO
-	       "PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n",
+	pr_info("PCI-DMA: Reserving %luMB of IOMMU area in the AGP aperture\n",
 	       iommu_size >> 20);
 
-	iommu_start = aper_size - iommu_size;
-	iommu_bus_base = info.aper_base + iommu_start;
-	bad_dma_address = iommu_bus_base;
-	iommu_gatt_base = agp_gatt_table + (iommu_start>>PAGE_SHIFT);
+	agp_memory_reserved	= iommu_size;
+	iommu_start		= aper_size - iommu_size;
+	iommu_bus_base		= info.aper_base + iommu_start;
+	bad_dma_addr		= iommu_bus_base;
+	iommu_gatt_base		= agp_gatt_table + (iommu_start>>PAGE_SHIFT);
 
 	/*
 	 * Unmap the IOMMU part of the GART. The alias of the page is
@@ -814,7 +822,7 @@
 	 * the pages as Not-Present:
 	 */
 	wbinvd();
-	
+
 	/*
 	 * Now all caches are flushed and we can safely enable
 	 * GART hardware.  Doing it early leaves the possibility
@@ -838,6 +846,10 @@
 
 	flush_gart();
 	dma_ops = &gart_dma_ops;
+	x86_platform.iommu_shutdown = gart_iommu_shutdown;
+	swiotlb = 0;
+
+	return 0;
 }
 
 void __init gart_parse_options(char *p)
@@ -856,7 +868,7 @@
 #endif
 	if (isdigit(*p) && get_option(&p, &arg))
 		iommu_size = arg;
-	if (!strncmp(p, "fullflush", 8))
+	if (!strncmp(p, "fullflush", 9))
 		iommu_fullflush = 1;
 	if (!strncmp(p, "nofullflush", 11))
 		iommu_fullflush = 0;
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index a3933d4..22be12b 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -33,7 +33,7 @@
 	dma_addr_t bus = page_to_phys(page) + offset;
 	WARN_ON(size == 0);
 	if (!check_addr("map_single", dev, bus, size))
-		return bad_dma_address;
+		return DMA_ERROR_CODE;
 	flush_write_buffers();
 	return bus;
 }
@@ -103,12 +103,3 @@
 	.sync_sg_for_device	= nommu_sync_sg_for_device,
 	.is_phys		= 1,
 };
-
-void __init no_iommu_init(void)
-{
-	if (dma_ops)
-		return;
-
-	force_iommu = 0; /* no HW IOMMU */
-	dma_ops = &nommu_dma_ops;
-}
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index aaa6b78..e3c0a66 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -42,18 +42,28 @@
 	.dma_supported = NULL,
 };
 
-void __init pci_swiotlb_init(void)
+/*
+ * pci_swiotlb_init - initialize swiotlb if necessary
+ *
+ * This returns non-zero if we are forced to use swiotlb (by the boot
+ * option).
+ */
+int __init pci_swiotlb_init(void)
 {
+	int use_swiotlb = swiotlb | swiotlb_force;
+
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
 #ifdef CONFIG_X86_64
-	if ((!iommu_detected && !no_iommu && max_pfn > MAX_DMA32_PFN))
+	if (!no_iommu && max_pfn > MAX_DMA32_PFN)
 		swiotlb = 1;
 #endif
 	if (swiotlb_force)
 		swiotlb = 1;
+
 	if (swiotlb) {
-		printk(KERN_INFO "PCI-DMA: Using software bounce buffering for IO (SWIOTLB)\n");
-		swiotlb_init();
+		swiotlb_init(0);
 		dma_ops = &swiotlb_dma_ops;
 	}
+
+	return use_swiotlb;
 }
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 5284cd2..5e2ba63 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -9,7 +9,9 @@
 #include <linux/pm.h>
 #include <linux/clockchips.h>
 #include <linux/random.h>
+#include <linux/user-return-notifier.h>
 #include <trace/events/power.h>
+#include <linux/hw_breakpoint.h>
 #include <asm/system.h>
 #include <asm/apic.h>
 #include <asm/syscalls.h>
@@ -17,6 +19,7 @@
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
 
 unsigned long idle_halt;
 EXPORT_SYMBOL(idle_halt);
@@ -103,14 +106,7 @@
 	}
 #endif
 
-	clear_tsk_thread_flag(tsk, TIF_DEBUG);
-
-	tsk->thread.debugreg0 = 0;
-	tsk->thread.debugreg1 = 0;
-	tsk->thread.debugreg2 = 0;
-	tsk->thread.debugreg3 = 0;
-	tsk->thread.debugreg6 = 0;
-	tsk->thread.debugreg7 = 0;
+	flush_ptrace_hw_breakpoint(tsk);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
 	/*
 	 * Forget coprocessor state..
@@ -192,16 +188,6 @@
 	else if (next->debugctlmsr != prev->debugctlmsr)
 		update_debugctlmsr(next->debugctlmsr);
 
-	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
-		set_debugreg(next->debugreg0, 0);
-		set_debugreg(next->debugreg1, 1);
-		set_debugreg(next->debugreg2, 2);
-		set_debugreg(next->debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg6, 6);
-		set_debugreg(next->debugreg7, 7);
-	}
-
 	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
 	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
 		/* prev and next are different */
@@ -224,6 +210,7 @@
 		 */
 		memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
 	}
+	propagate_user_return_notify(prev_p, next_p);
 }
 
 int sys_fork(struct pt_regs *regs)
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 4cf7956..075580b 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -58,6 +58,7 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
@@ -134,7 +135,7 @@
 		ss = regs->ss & 0xffff;
 		gs = get_user_gs(regs);
 	} else {
-		sp = (unsigned long) (&regs->sp);
+		sp = kernel_stack_pointer(regs);
 		savesegment(ss, ss);
 		savesegment(gs, gs);
 	}
@@ -187,7 +188,7 @@
 
 void show_regs(struct pt_regs *regs)
 {
-	__show_regs(regs, 1);
+	show_registers(regs);
 	show_trace(NULL, regs, &regs->sp, regs->bp);
 }
 
@@ -259,7 +260,12 @@
 
 	task_user_gs(p) = get_user_gs(regs);
 
+	p->thread.io_bitmap_ptr = NULL;
 	tsk = current;
+	err = -ENOMEM;
+
+	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
+
 	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
 						IO_BITMAP_BYTES, GFP_KERNEL);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index eb62cbc..c95c8f4 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -52,6 +52,7 @@
 #include <asm/idle.h>
 #include <asm/syscalls.h>
 #include <asm/ds.h>
+#include <asm/debugreg.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -226,8 +227,7 @@
 
 void show_regs(struct pt_regs *regs)
 {
-	printk(KERN_INFO "CPU %d:", smp_processor_id());
-	__show_regs(regs, 1);
+	show_registers(regs);
 	show_trace(NULL, regs, (void *)(regs + 1), regs->bp);
 }
 
@@ -297,12 +297,16 @@
 
 	p->thread.fs = me->thread.fs;
 	p->thread.gs = me->thread.gs;
+	p->thread.io_bitmap_ptr = NULL;
 
 	savesegment(gs, p->thread.gsindex);
 	savesegment(fs, p->thread.fsindex);
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
 
+	err = -ENOMEM;
+	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
+
 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
@@ -341,29 +345,46 @@
 		kfree(p->thread.io_bitmap_ptr);
 		p->thread.io_bitmap_max = 0;
 	}
+
 	return err;
 }
 
-void
-start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+static void
+start_thread_common(struct pt_regs *regs, unsigned long new_ip,
+		    unsigned long new_sp,
+		    unsigned int _cs, unsigned int _ss, unsigned int _ds)
 {
 	loadsegment(fs, 0);
-	loadsegment(es, 0);
-	loadsegment(ds, 0);
+	loadsegment(es, _ds);
+	loadsegment(ds, _ds);
 	load_gs_index(0);
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
 	percpu_write(old_rsp, new_sp);
-	regs->cs		= __USER_CS;
-	regs->ss		= __USER_DS;
-	regs->flags		= 0x200;
+	regs->cs		= _cs;
+	regs->ss		= _ss;
+	regs->flags		= X86_EFLAGS_IF;
 	set_fs(USER_DS);
 	/*
 	 * Free the old FP and other extended state
 	 */
 	free_thread_xstate(current);
 }
-EXPORT_SYMBOL_GPL(start_thread);
+
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	start_thread_common(regs, new_ip, new_sp,
+			    __USER_CS, __USER_DS, 0);
+}
+
+#ifdef CONFIG_IA32_EMULATION
+void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp)
+{
+	start_thread_common(regs, new_ip, new_sp,
+			    __USER32_CS, __USER32_DS, __USER32_DS);
+}
+#endif
 
 /*
  *	switch_to(x,y) should switch tasks from x to y.
@@ -495,6 +516,7 @@
 	 */
 	if (preload_fpu)
 		__math_state_restore();
+
 	return prev_p;
 }
 
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 7b058a2..04d182a 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -22,6 +22,8 @@
 #include <linux/seccomp.h>
 #include <linux/signal.h>
 #include <linux/workqueue.h>
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -34,6 +36,7 @@
 #include <asm/prctl.h>
 #include <asm/proto.h>
 #include <asm/ds.h>
+#include <asm/hw_breakpoint.h>
 
 #include "tls.h"
 
@@ -49,6 +52,118 @@
 	REGSET_IOPERM32,
 };
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+#ifdef CONFIG_X86_64
+	REG_OFFSET_NAME(r15),
+	REG_OFFSET_NAME(r14),
+	REG_OFFSET_NAME(r13),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r8),
+#endif
+	REG_OFFSET_NAME(bx),
+	REG_OFFSET_NAME(cx),
+	REG_OFFSET_NAME(dx),
+	REG_OFFSET_NAME(si),
+	REG_OFFSET_NAME(di),
+	REG_OFFSET_NAME(bp),
+	REG_OFFSET_NAME(ax),
+#ifdef CONFIG_X86_32
+	REG_OFFSET_NAME(ds),
+	REG_OFFSET_NAME(es),
+	REG_OFFSET_NAME(fs),
+	REG_OFFSET_NAME(gs),
+#endif
+	REG_OFFSET_NAME(orig_ax),
+	REG_OFFSET_NAME(ip),
+	REG_OFFSET_NAME(cs),
+	REG_OFFSET_NAME(flags),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(ss),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+static const int arg_offs_table[] = {
+#ifdef CONFIG_X86_32
+	[0] = offsetof(struct pt_regs, ax),
+	[1] = offsetof(struct pt_regs, dx),
+	[2] = offsetof(struct pt_regs, cx)
+#else /* CONFIG_X86_64 */
+	[0] = offsetof(struct pt_regs, di),
+	[1] = offsetof(struct pt_regs, si),
+	[2] = offsetof(struct pt_regs, dx),
+	[3] = offsetof(struct pt_regs, cx),
+	[4] = offsetof(struct pt_regs, r8),
+	[5] = offsetof(struct pt_regs, r9)
+#endif
+};
+
+/**
+ * regs_get_argument_nth() - get Nth argument at function call
+ * @regs:	pt_regs which contains registers at function entry.
+ * @n:		argument number.
+ *
+ * regs_get_argument_nth() returns @n th argument of a function call.
+ * Since usually the kernel stack will be changed right after function entry,
+ * you must use this at function entry. If the @n th entry is NOT in the
+ * kernel stack or pt_regs, this returns 0.
+ */
+unsigned long regs_get_argument_nth(struct pt_regs *regs, unsigned int n)
+{
+	if (n < ARRAY_SIZE(arg_offs_table))
+		return *(unsigned long *)((char *)regs + arg_offs_table[n]);
+	else {
+		/*
+		 * The typical case: arg n is on the stack.
+		 * (Note: stack[0] = return address, so skip it)
+		 */
+		n -= ARRAY_SIZE(arg_offs_table);
+		return regs_get_kernel_stack_nth(regs, 1 + n);
+	}
+}
+
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
@@ -137,11 +252,6 @@
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-	return TASK_SIZE - 3;
-}
-
 #else  /* CONFIG_X86_64 */
 
 #define FLAG_MASK		(FLAG_MASK_32 | X86_EFLAGS_NT)
@@ -266,15 +376,6 @@
 	return 0;
 }
 
-static unsigned long debugreg_addr_limit(struct task_struct *task)
-{
-#ifdef CONFIG_IA32_EMULATION
-	if (test_tsk_thread_flag(task, TIF_IA32))
-		return IA32_PAGE_OFFSET - 3;
-#endif
-	return TASK_SIZE_MAX - 7;
-}
-
 #endif	/* CONFIG_X86_32 */
 
 static unsigned long get_flags(struct task_struct *task)
@@ -454,96 +555,236 @@
 	return ret;
 }
 
-/*
- * This function is trivial and will be inlined by the compiler.
- * Having it separates the implementation details of debug
- * registers from the interface details of ptrace.
- */
-static unsigned long ptrace_get_debugreg(struct task_struct *child, int n)
+static void ptrace_triggered(struct perf_event *bp, void *data)
 {
-	switch (n) {
-	case 0:		return child->thread.debugreg0;
-	case 1:		return child->thread.debugreg1;
-	case 2:		return child->thread.debugreg2;
-	case 3:		return child->thread.debugreg3;
-	case 6:		return child->thread.debugreg6;
-	case 7:		return child->thread.debugreg7;
+	int i;
+	struct thread_struct *thread = &(current->thread);
+
+	/*
+	 * Store in the virtual DR6 register the fact that the breakpoint
+	 * was hit so the thread's debugger will see it.
+	 */
+	for (i = 0; i < HBP_NUM; i++) {
+		if (thread->ptrace_bps[i] == bp)
+			break;
 	}
+
+	thread->debugreg6 |= (DR_TRAP0 << i);
+}
+
+/*
+ * Walk through every ptrace breakpoints for this thread and
+ * build the dr7 value on top of their attributes.
+ *
+ */
+static unsigned long ptrace_get_dr7(struct perf_event *bp[])
+{
+	int i;
+	int dr7 = 0;
+	struct arch_hw_breakpoint *info;
+
+	for (i = 0; i < HBP_NUM; i++) {
+		if (bp[i] && !bp[i]->attr.disabled) {
+			info = counter_arch_bp(bp[i]);
+			dr7 |= encode_dr7(i, info->len, info->type);
+		}
+	}
+
+	return dr7;
+}
+
+static struct perf_event *
+ptrace_modify_breakpoint(struct perf_event *bp, int len, int type,
+			 struct task_struct *tsk, int disabled)
+{
+	int err;
+	int gen_len, gen_type;
+	DEFINE_BREAKPOINT_ATTR(attr);
+
+	/*
+	 * We shoud have at least an inactive breakpoint at this
+	 * slot. It means the user is writing dr7 without having
+	 * written the address register first
+	 */
+	if (!bp)
+		return ERR_PTR(-EINVAL);
+
+	err = arch_bp_generic_fields(len, type, &gen_len, &gen_type);
+	if (err)
+		return ERR_PTR(err);
+
+	attr = bp->attr;
+	attr.bp_len = gen_len;
+	attr.bp_type = gen_type;
+	attr.disabled = disabled;
+
+	return modify_user_hw_breakpoint(bp, &attr, bp->callback, tsk);
+}
+
+/*
+ * Handle ptrace writes to debug register 7.
+ */
+static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long old_dr7;
+	int i, orig_ret = 0, rc = 0;
+	int enabled, second_pass = 0;
+	unsigned len, type;
+	struct perf_event *bp;
+
+	data &= ~DR_CONTROL_RESERVED;
+	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
+restore:
+	/*
+	 * Loop through all the hardware breakpoints, making the
+	 * appropriate changes to each.
+	 */
+	for (i = 0; i < HBP_NUM; i++) {
+		enabled = decode_dr7(data, i, &len, &type);
+		bp = thread->ptrace_bps[i];
+
+		if (!enabled) {
+			if (bp) {
+				/*
+				 * Don't unregister the breakpoints right-away,
+				 * unless all register_user_hw_breakpoint()
+				 * requests have succeeded. This prevents
+				 * any window of opportunity for debug
+				 * register grabbing by other users.
+				 */
+				if (!second_pass)
+					continue;
+
+				thread->ptrace_bps[i] = NULL;
+				bp = ptrace_modify_breakpoint(bp, len, type,
+							      tsk, 1);
+				if (IS_ERR(bp)) {
+					rc = PTR_ERR(bp);
+					thread->ptrace_bps[i] = NULL;
+					break;
+				}
+				thread->ptrace_bps[i] = bp;
+			}
+			continue;
+		}
+
+		bp = ptrace_modify_breakpoint(bp, len, type, tsk, 0);
+
+		/* Incorrect bp, or we have a bug in bp API */
+		if (IS_ERR(bp)) {
+			rc = PTR_ERR(bp);
+			thread->ptrace_bps[i] = NULL;
+			break;
+		}
+		thread->ptrace_bps[i] = bp;
+	}
+	/*
+	 * Make a second pass to free the remaining unused breakpoints
+	 * or to restore the original breakpoints if an error occurred.
+	 */
+	if (!second_pass) {
+		second_pass = 1;
+		if (rc < 0) {
+			orig_ret = rc;
+			data = old_dr7;
+		}
+		goto restore;
+	}
+	return ((orig_ret < 0) ? orig_ret : rc);
+}
+
+/*
+ * Handle PTRACE_PEEKUSR calls for the debug register area.
+ */
+static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
+{
+	struct thread_struct *thread = &(tsk->thread);
+	unsigned long val = 0;
+
+	if (n < HBP_NUM) {
+		struct perf_event *bp;
+		bp = thread->ptrace_bps[n];
+		if (!bp)
+			return 0;
+		val = bp->hw.info.address;
+	} else if (n == 6) {
+		val = thread->debugreg6;
+	 } else if (n == 7) {
+		val = ptrace_get_dr7(thread->ptrace_bps);
+	}
+	return val;
+}
+
+static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
+				      unsigned long addr)
+{
+	struct perf_event *bp;
+	struct thread_struct *t = &tsk->thread;
+	DEFINE_BREAKPOINT_ATTR(attr);
+
+	if (!t->ptrace_bps[nr]) {
+		/*
+		 * Put stub len and type to register (reserve) an inactive but
+		 * correct bp
+		 */
+		attr.bp_addr = addr;
+		attr.bp_len = HW_BREAKPOINT_LEN_1;
+		attr.bp_type = HW_BREAKPOINT_W;
+		attr.disabled = 1;
+
+		bp = register_user_hw_breakpoint(&attr, ptrace_triggered, tsk);
+	} else {
+		bp = t->ptrace_bps[nr];
+		t->ptrace_bps[nr] = NULL;
+
+		attr = bp->attr;
+		attr.bp_addr = addr;
+		bp = modify_user_hw_breakpoint(bp, &attr, bp->callback, tsk);
+	}
+	/*
+	 * CHECKME: the previous code returned -EIO if the addr wasn't a
+	 * valid task virtual addr. The new one will return -EINVAL in this
+	 * case.
+	 * -EINVAL may be what we want for in-kernel breakpoints users, but
+	 * -EIO looks better for ptrace, since we refuse a register writing
+	 * for the user. And anyway this is the previous behaviour.
+	 */
+	if (IS_ERR(bp))
+		return PTR_ERR(bp);
+
+	t->ptrace_bps[nr] = bp;
+
 	return 0;
 }
 
-static int ptrace_set_debugreg(struct task_struct *child,
-			       int n, unsigned long data)
+/*
+ * Handle PTRACE_POKEUSR calls for the debug register area.
+ */
+int ptrace_set_debugreg(struct task_struct *tsk, int n, unsigned long val)
 {
-	int i;
+	struct thread_struct *thread = &(tsk->thread);
+	int rc = 0;
 
-	if (unlikely(n == 4 || n == 5))
+	/* There are no DR4 or DR5 registers */
+	if (n == 4 || n == 5)
 		return -EIO;
 
-	if (n < 4 && unlikely(data >= debugreg_addr_limit(child)))
-		return -EIO;
-
-	switch (n) {
-	case 0:		child->thread.debugreg0 = data; break;
-	case 1:		child->thread.debugreg1 = data; break;
-	case 2:		child->thread.debugreg2 = data; break;
-	case 3:		child->thread.debugreg3 = data; break;
-
-	case 6:
-		if ((data & ~0xffffffffUL) != 0)
-			return -EIO;
-		child->thread.debugreg6 = data;
-		break;
-
-	case 7:
-		/*
-		 * Sanity-check data. Take one half-byte at once with
-		 * check = (val >> (16 + 4*i)) & 0xf. It contains the
-		 * R/Wi and LENi bits; bits 0 and 1 are R/Wi, and bits
-		 * 2 and 3 are LENi. Given a list of invalid values,
-		 * we do mask |= 1 << invalid_value, so that
-		 * (mask >> check) & 1 is a correct test for invalid
-		 * values.
-		 *
-		 * R/Wi contains the type of the breakpoint /
-		 * watchpoint, LENi contains the length of the watched
-		 * data in the watchpoint case.
-		 *
-		 * The invalid values are:
-		 * - LENi == 0x10 (undefined), so mask |= 0x0f00.	[32-bit]
-		 * - R/Wi == 0x10 (break on I/O reads or writes), so
-		 *   mask |= 0x4444.
-		 * - R/Wi == 0x00 && LENi != 0x00, so we have mask |=
-		 *   0x1110.
-		 *
-		 * Finally, mask = 0x0f00 | 0x4444 | 0x1110 == 0x5f54.
-		 *
-		 * See the Intel Manual "System Programming Guide",
-		 * 15.2.4
-		 *
-		 * Note that LENi == 0x10 is defined on x86_64 in long
-		 * mode (i.e. even for 32-bit userspace software, but
-		 * 64-bit kernel), so the x86_64 mask value is 0x5454.
-		 * See the AMD manual no. 24593 (AMD64 System Programming)
-		 */
-#ifdef CONFIG_X86_32
-#define	DR7_MASK	0x5f54
-#else
-#define	DR7_MASK	0x5554
-#endif
-		data &= ~DR_CONTROL_RESERVED;
-		for (i = 0; i < 4; i++)
-			if ((DR7_MASK >> ((data >> (16 + 4*i)) & 0xf)) & 1)
-				return -EIO;
-		child->thread.debugreg7 = data;
-		if (data)
-			set_tsk_thread_flag(child, TIF_DEBUG);
-		else
-			clear_tsk_thread_flag(child, TIF_DEBUG);
-		break;
+	if (n == 6) {
+		thread->debugreg6 = val;
+		goto ret_path;
 	}
+	if (n < HBP_NUM) {
+		rc = ptrace_set_breakpoint_addr(tsk, n, val);
+		if (rc)
+			return rc;
+	}
+	/* All that's left is DR7 */
+	if (n == 7)
+		rc = ptrace_write_dr7(tsk, val);
 
-	return 0;
+ret_path:
+	return rc;
 }
 
 /*
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 6c3b2c6..18093d7 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -499,6 +499,7 @@
 {
 	struct pci_dev *nb_ht;
 	unsigned int devfn;
+	u32 node;
 	u32 val;
 
 	devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
@@ -507,7 +508,13 @@
 		return;
 
 	pci_read_config_dword(nb_ht, 0x60, &val);
-	set_dev_node(&dev->dev, val & 7);
+	node = val & 7;
+	/*
+	 * Some hardware may return an invalid node ID,
+	 * so check it first:
+	 */
+	if (node_online(node))
+		set_dev_node(&dev->dev, node);
 	pci_dev_put(nb_ht);
 }
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f930787..2b97fc5 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -23,7 +23,7 @@
 # include <linux/ctype.h>
 # include <linux/mc146818rtc.h>
 #else
-# include <asm/iommu.h>
+# include <asm/x86_init.h>
 #endif
 
 /*
@@ -622,7 +622,7 @@
 #endif
 
 #ifdef CONFIG_X86_64
-	pci_iommu_shutdown();
+	x86_platform.iommu_shutdown();
 #endif
 }
 
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index 61a8377..201eab6 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -80,6 +80,7 @@
 			continue;
 
 		cur->reboot_fixup(dev);
+		pci_dev_put(dev);
 	}
 }
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2a34f9c..946a311 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -106,9 +106,11 @@
 #include <asm/percpu.h>
 #include <asm/topology.h>
 #include <asm/apicdef.h>
+#include <asm/k8.h>
 #ifdef CONFIG_X86_64
 #include <asm/numa_64.h>
 #endif
+#include <asm/mce.h>
 
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -247,7 +249,7 @@
  *              from boot_params into a safe place.
  *
  */
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
 {
      memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
 	    sizeof(edd.mbr_signature));
@@ -256,7 +258,7 @@
      edd.edd_info_nr = boot_params.eddbuf_entries;
 }
 #else
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
 {
 }
 #endif
@@ -486,42 +488,11 @@
 
 #ifdef CONFIG_KEXEC
 
-/**
- * Reserve @size bytes of crashkernel memory at any suitable offset.
- *
- * @size: Size of the crashkernel memory to reserve.
- * Returns the base address on success, and -1ULL on failure.
- */
-static
-unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
-{
-	const unsigned long long alignment = 16<<20; 	/* 16M */
-	unsigned long long start = 0LL;
-
-	while (1) {
-		int ret;
-
-		start = find_e820_area(start, ULONG_MAX, size, alignment);
-		if (start == -1ULL)
-			return start;
-
-		/* try to reserve it */
-		ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE);
-		if (ret >= 0)
-			return start;
-
-		start += alignment;
-	}
-}
-
 static inline unsigned long long get_total_mem(void)
 {
 	unsigned long long total;
 
-	total = max_low_pfn - min_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	total += highend_pfn - highstart_pfn;
-#endif
+	total = max_pfn - min_low_pfn;
 
 	return total << PAGE_SHIFT;
 }
@@ -541,21 +512,25 @@
 
 	/* 0 means: find the address automatically */
 	if (crash_base <= 0) {
-		crash_base = find_and_reserve_crashkernel(crash_size);
+		const unsigned long long alignment = 16<<20;	/* 16M */
+
+		crash_base = find_e820_area(alignment, ULONG_MAX, crash_size,
+				 alignment);
 		if (crash_base == -1ULL) {
-			pr_info("crashkernel reservation failed. "
-				"No suitable area found.\n");
+			pr_info("crashkernel reservation failed - No suitable area found.\n");
 			return;
 		}
 	} else {
-		ret = reserve_bootmem_generic(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE);
-		if (ret < 0) {
-			pr_info("crashkernel reservation failed - "
-				"memory is in use\n");
+		unsigned long long start;
+
+		start = find_e820_area(crash_base, ULONG_MAX, crash_size,
+				 1<<20);
+		if (start != crash_base) {
+			pr_info("crashkernel reservation failed - memory is in use.\n");
 			return;
 		}
 	}
+	reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL");
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 			"for crashkernel (System RAM: %ldMB)\n",
@@ -698,6 +673,9 @@
 
 void __init setup_arch(char **cmdline_p)
 {
+	int acpi = 0;
+	int k8 = 0;
+
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
@@ -790,21 +768,18 @@
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
-#ifdef CONFIG_X86_64
 	/*
-	 * Must call this twice: Once just to detect whether hardware doesn't
-	 * support NX (so that the early EHCI debug console setup can safely
-	 * call set_fixmap(), and then again after parsing early parameters to
-	 * honor the respective command line option.
+	 * x86_configure_nx() is called before parse_early_param() to detect
+	 * whether hardware doesn't support NX (so that the early EHCI debug
+	 * console setup can safely call set_fixmap()). It may then be called
+	 * again from within noexec_setup() during parsing early parameters
+	 * to honor the respective command line option.
 	 */
-	check_efer();
-#endif
+	x86_configure_nx();
 
 	parse_early_param();
 
-#ifdef CONFIG_X86_64
-	check_efer();
-#endif
+	x86_report_nx();
 
 	/* Must be before kernel pagetables are setup */
 	vmi_activate();
@@ -900,6 +875,13 @@
 
 	reserve_brk();
 
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 * even before init_memory_mapping
+	 */
+	acpi_reserve_wakeup_memory();
+#endif
 	init_gbpages();
 
 	/* max_pfn_mapped is updated here */
@@ -926,6 +908,8 @@
 
 	reserve_initrd();
 
+	reserve_crashkernel();
+
 	vsmp_init();
 
 	io_delay_init();
@@ -937,27 +921,24 @@
 
 	early_acpi_boot_init();
 
-#ifdef CONFIG_ACPI_NUMA
-	/*
-	 * Parse SRAT to discover nodes.
-	 */
-	acpi_numa_init();
-#endif
-
-	initmem_init(0, max_pfn);
-
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-	acpi_reserve_bootmem();
-#endif
 	/*
 	 * Find and reserve possible boot-time SMP configuration:
 	 */
 	find_smp_config();
 
-	reserve_crashkernel();
+#ifdef CONFIG_ACPI_NUMA
+	/*
+	 * Parse SRAT to discover nodes.
+	 */
+	acpi = acpi_numa_init();
+#endif
+
+#ifdef CONFIG_K8_NUMA
+	if (!acpi)
+		k8 = !k8_numa_init(0, max_pfn);
+#endif
+
+	initmem_init(0, max_pfn, acpi, k8);
 
 #ifdef CONFIG_X86_64
 	/*
@@ -1031,6 +1012,8 @@
 #endif
 #endif
 	x86_init.oem.banner();
+
+	mcheck_init();
 }
 
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 6a44a76..74fe6d8 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -19,6 +19,7 @@
 #include <linux/stddef.h>
 #include <linux/personality.h>
 #include <linux/uaccess.h>
+#include <linux/user-return-notifier.h>
 
 #include <asm/processor.h>
 #include <asm/ucontext.h>
@@ -799,15 +800,6 @@
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/*
-		 * Re-enable any watchpoints before delivering the
-		 * signal to user space. The processor register will
-		 * have been cleared if the watchpoint triggered
-		 * inside the kernel.
-		 */
-		if (current->thread.debugreg7)
-			set_debugreg(current->thread.debugreg7, 7);
-
 		/* Whee! Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
 			/*
@@ -872,6 +864,8 @@
 		if (current->replacement_session_keyring)
 			key_replace_session_keyring();
 	}
+	if (thread_info_flags & _TIF_USER_RETURN_NOTIFY)
+		fire_user_return_notifiers();
 
 #ifdef CONFIG_X86_32
 	clear_thread_flag(TIF_IRET);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 565ebc6..324f2a4 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1250,16 +1250,7 @@
 void cpu_disable_common(void)
 {
 	int cpu = smp_processor_id();
-	/*
-	 * HACK:
-	 * Allow any queued timer interrupts to get serviced
-	 * This is only a temporary solution until we cleanup
-	 * fixup_irqs as we do for IA64.
-	 */
-	local_irq_enable();
-	mdelay(1);
 
-	local_irq_disable();
 	remove_siblinginfo(cpu);
 
 	/* It's now safe to remove this processor from the online map */
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 0157cd2..70c2125 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -336,3 +336,4 @@
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 1740c85..364d015ef 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -817,10 +817,8 @@
 	 */
 	apicid = blade_to_first_apicid(blade);
 	pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
-	if ((pa & 0xff) != UV_BAU_MESSAGE) {
-		uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
+	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
 				      ((apicid << 32) | UV_BAU_MESSAGE));
-	}
 	return 0;
 }
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 7e37dce..3339917 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -529,77 +529,56 @@
 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
 	struct task_struct *tsk = current;
-	unsigned long condition;
+	unsigned long dr6;
 	int si_code;
 
-	get_debugreg(condition, 6);
+	get_debugreg(dr6, 6);
 
 	/* Catch kmemcheck conditions first of all! */
-	if (condition & DR_STEP && kmemcheck_trap(regs))
+	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
 		return;
 
+	/* DR6 may or may not be cleared by the CPU */
+	set_debugreg(0, 6);
 	/*
 	 * The processor cleared BTF, so don't mark that we need it set.
 	 */
 	clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
 	tsk->thread.debugctlmsr = 0;
 
-	if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
-						SIGTRAP) == NOTIFY_STOP)
+	/* Store the virtualized DR6 value */
+	tsk->thread.debugreg6 = dr6;
+
+	if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
+							SIGTRAP) == NOTIFY_STOP)
 		return;
 
 	/* It's safe to allow irq's after DR6 has been saved */
 	preempt_conditional_sti(regs);
 
-	/* Mask out spurious debug traps due to lazy DR7 setting */
-	if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
-		if (!tsk->thread.debugreg7)
-			goto clear_dr7;
+	if (regs->flags & X86_VM_MASK) {
+		handle_vm86_trap((struct kernel_vm86_regs *) regs,
+				error_code, 1);
+		return;
 	}
 
-#ifdef CONFIG_X86_32
-	if (regs->flags & X86_VM_MASK)
-		goto debug_vm86;
-#endif
-
-	/* Save debug status register where ptrace can see it */
-	tsk->thread.debugreg6 = condition;
-
 	/*
-	 * Single-stepping through TF: make sure we ignore any events in
-	 * kernel space (but re-enable TF when returning to user mode).
+	 * Single-stepping through system calls: ignore any exceptions in
+	 * kernel space, but re-enable TF when returning to user mode.
+	 *
+	 * We already checked v86 mode above, so we can check for kernel mode
+	 * by just checking the CPL of CS.
 	 */
-	if (condition & DR_STEP) {
-		if (!user_mode(regs))
-			goto clear_TF_reenable;
+	if ((dr6 & DR_STEP) && !user_mode(regs)) {
+		tsk->thread.debugreg6 &= ~DR_STEP;
+		set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
+		regs->flags &= ~X86_EFLAGS_TF;
 	}
-
-	si_code = get_si_code(condition);
-	/* Ok, finally something we can handle */
-	send_sigtrap(tsk, regs, error_code, si_code);
-
-	/*
-	 * Disable additional traps. They'll be re-enabled when
-	 * the signal is delivered.
-	 */
-clear_dr7:
-	set_debugreg(0, 7);
+	si_code = get_si_code(tsk->thread.debugreg6);
+	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
+		send_sigtrap(tsk, regs, error_code, si_code);
 	preempt_conditional_cli(regs);
-	return;
 
-#ifdef CONFIG_X86_32
-debug_vm86:
-	/* reenable preemption: handle_vm86_trap() might sleep */
-	dec_preempt_count();
-	handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
-	conditional_cli(regs);
-	return;
-#endif
-
-clear_TF_reenable:
-	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~X86_EFLAGS_TF;
-	preempt_conditional_cli(regs);
 	return;
 }
 
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index f379309..eed1568 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -114,13 +114,12 @@
 		return;
 
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
-		printk_once(KERN_INFO "Skipping synchronization checks as TSC is reliable.\n");
+		if (cpu == (nr_cpu_ids-1) || system_state != SYSTEM_BOOTING)
+			pr_info(
+			"Skipped synchronization checks as TSC is reliable.\n");
 		return;
 	}
 
-	pr_info("checking TSC synchronization [CPU#%d -> CPU#%d]:",
-		smp_processor_id(), cpu);
-
 	/*
 	 * Reset it - in case this is a second bootup:
 	 */
@@ -142,12 +141,14 @@
 		cpu_relax();
 
 	if (nr_warps) {
-		printk("\n");
+		pr_warning("TSC synchronization [CPU#%d -> CPU#%d]:\n",
+			smp_processor_id(), cpu);
 		pr_warning("Measured %Ld cycles TSC warp between CPUs, "
 			   "turning off TSC clock.\n", max_warp);
 		mark_tsc_unstable("check_tsc_sync_source failed");
 	} else {
-		printk(" passed.\n");
+		pr_debug("TSC synchronization [CPU#%d -> CPU#%d]: passed\n",
+			smp_processor_id(), cpu);
 	}
 
 	/*
diff --git a/arch/x86/kernel/uv_irq.c b/arch/x86/kernel/uv_irq.c
index aeef529..61d805d 100644
--- a/arch/x86/kernel/uv_irq.c
+++ b/arch/x86/kernel/uv_irq.c
@@ -9,10 +9,25 @@
  */
 
 #include <linux/module.h>
+#include <linux/rbtree.h>
 #include <linux/irq.h>
 
 #include <asm/apic.h>
 #include <asm/uv/uv_irq.h>
+#include <asm/uv/uv_hub.h>
+
+/* MMR offset and pnode of hub sourcing interrupts for a given irq */
+struct uv_irq_2_mmr_pnode{
+	struct rb_node		list;
+	unsigned long		offset;
+	int			pnode;
+	int			irq;
+};
+
+static spinlock_t		uv_irq_lock;
+static struct rb_root		uv_irq_root;
+
+static int uv_set_irq_affinity(unsigned int, const struct cpumask *);
 
 static void uv_noop(unsigned int irq)
 {
@@ -39,25 +54,214 @@
 	.unmask		= uv_noop,
 	.eoi		= uv_ack_apic,
 	.end		= uv_noop,
+	.set_affinity	= uv_set_irq_affinity,
 };
 
 /*
+ * Add offset and pnode information of the hub sourcing interrupts to the
+ * rb tree for a specific irq.
+ */
+static int uv_set_irq_2_mmr_info(int irq, unsigned long offset, unsigned blade)
+{
+	struct rb_node **link = &uv_irq_root.rb_node;
+	struct rb_node *parent = NULL;
+	struct uv_irq_2_mmr_pnode *n;
+	struct uv_irq_2_mmr_pnode *e;
+	unsigned long irqflags;
+
+	n = kmalloc_node(sizeof(struct uv_irq_2_mmr_pnode), GFP_KERNEL,
+				uv_blade_to_memory_nid(blade));
+	if (!n)
+		return -ENOMEM;
+
+	n->irq = irq;
+	n->offset = offset;
+	n->pnode = uv_blade_to_pnode(blade);
+	spin_lock_irqsave(&uv_irq_lock, irqflags);
+	/* Find the right place in the rbtree: */
+	while (*link) {
+		parent = *link;
+		e = rb_entry(parent, struct uv_irq_2_mmr_pnode, list);
+
+		if (unlikely(irq == e->irq)) {
+			/* irq entry exists */
+			e->pnode = uv_blade_to_pnode(blade);
+			e->offset = offset;
+			spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+			kfree(n);
+			return 0;
+		}
+
+		if (irq < e->irq)
+			link = &(*link)->rb_left;
+		else
+			link = &(*link)->rb_right;
+	}
+
+	/* Insert the node into the rbtree. */
+	rb_link_node(&n->list, parent, link);
+	rb_insert_color(&n->list, &uv_irq_root);
+
+	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+	return 0;
+}
+
+/* Retrieve offset and pnode information from the rb tree for a specific irq */
+int uv_irq_2_mmr_info(int irq, unsigned long *offset, int *pnode)
+{
+	struct uv_irq_2_mmr_pnode *e;
+	struct rb_node *n;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&uv_irq_lock, irqflags);
+	n = uv_irq_root.rb_node;
+	while (n) {
+		e = rb_entry(n, struct uv_irq_2_mmr_pnode, list);
+
+		if (e->irq == irq) {
+			*offset = e->offset;
+			*pnode = e->pnode;
+			spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+			return 0;
+		}
+
+		if (irq < e->irq)
+			n = n->rb_left;
+		else
+			n = n->rb_right;
+	}
+	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
+	return -1;
+}
+
+/*
+ * Re-target the irq to the specified CPU and enable the specified MMR located
+ * on the specified blade to allow the sending of MSIs to the specified CPU.
+ */
+static int
+arch_enable_uv_irq(char *irq_name, unsigned int irq, int cpu, int mmr_blade,
+		       unsigned long mmr_offset, int restrict)
+{
+	const struct cpumask *eligible_cpu = cpumask_of(cpu);
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg;
+	int mmr_pnode;
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	int err;
+
+	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
+			sizeof(unsigned long));
+
+	cfg = irq_cfg(irq);
+
+	err = assign_irq_vector(irq, cfg, eligible_cpu);
+	if (err != 0)
+		return err;
+
+	if (restrict == UV_AFFINITY_CPU)
+		desc->status |= IRQ_NO_BALANCING;
+	else
+		desc->status |= IRQ_MOVE_PCNTXT;
+
+	set_irq_chip_and_handler_name(irq, &uv_irq_chip, handle_percpu_irq,
+				      irq_name);
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	entry->vector		= cfg->vector;
+	entry->delivery_mode	= apic->irq_delivery_mode;
+	entry->dest_mode	= apic->irq_dest_mode;
+	entry->polarity		= 0;
+	entry->trigger		= 0;
+	entry->mask		= 0;
+	entry->dest		= apic->cpu_mask_to_apicid(eligible_cpu);
+
+	mmr_pnode = uv_blade_to_pnode(mmr_blade);
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	return irq;
+}
+
+/*
+ * Disable the specified MMR located on the specified blade so that MSIs are
+ * longer allowed to be sent.
+ */
+static void arch_disable_uv_irq(int mmr_pnode, unsigned long mmr_offset)
+{
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+
+	BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) !=
+			sizeof(unsigned long));
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+	entry->mask = 1;
+
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+}
+
+static int uv_set_irq_affinity(unsigned int irq, const struct cpumask *mask)
+{
+	struct irq_desc *desc = irq_to_desc(irq);
+	struct irq_cfg *cfg = desc->chip_data;
+	unsigned int dest;
+	unsigned long mmr_value;
+	struct uv_IO_APIC_route_entry *entry;
+	unsigned long mmr_offset;
+	unsigned mmr_pnode;
+
+	dest = set_desc_affinity(desc, mask);
+	if (dest == BAD_APICID)
+		return -1;
+
+	mmr_value = 0;
+	entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
+
+	entry->vector		= cfg->vector;
+	entry->delivery_mode	= apic->irq_delivery_mode;
+	entry->dest_mode	= apic->irq_dest_mode;
+	entry->polarity		= 0;
+	entry->trigger		= 0;
+	entry->mask		= 0;
+	entry->dest		= dest;
+
+	/* Get previously stored MMR and pnode of hub sourcing interrupts */
+	if (uv_irq_2_mmr_info(irq, &mmr_offset, &mmr_pnode))
+		return -1;
+
+	uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
+
+	if (cfg->move_in_progress)
+		send_cleanup_vector(cfg);
+
+	return 0;
+}
+
+/*
  * Set up a mapping of an available irq and vector, and enable the specified
  * MMR that defines the MSI that is to be sent to the specified CPU when an
  * interrupt is raised.
  */
 int uv_setup_irq(char *irq_name, int cpu, int mmr_blade,
-		 unsigned long mmr_offset)
+		 unsigned long mmr_offset, int restrict)
 {
-	int irq;
-	int ret;
+	int irq, ret;
 
-	irq = create_irq();
+	irq = create_irq_nr(NR_IRQS_LEGACY, uv_blade_to_memory_nid(mmr_blade));
+
 	if (irq <= 0)
 		return -EBUSY;
 
-	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset);
-	if (ret != irq)
+	ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset,
+		restrict);
+	if (ret == irq)
+		uv_set_irq_2_mmr_info(irq, mmr_offset, mmr_blade);
+	else
 		destroy_irq(irq);
 
 	return ret;
@@ -71,9 +275,28 @@
  *
  * Set mmr_blade and mmr_offset to what was passed in on uv_setup_irq().
  */
-void uv_teardown_irq(unsigned int irq, int mmr_blade, unsigned long mmr_offset)
+void uv_teardown_irq(unsigned int irq)
 {
-	arch_disable_uv_irq(mmr_blade, mmr_offset);
+	struct uv_irq_2_mmr_pnode *e;
+	struct rb_node *n;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&uv_irq_lock, irqflags);
+	n = uv_irq_root.rb_node;
+	while (n) {
+		e = rb_entry(n, struct uv_irq_2_mmr_pnode, list);
+		if (e->irq == irq) {
+			arch_disable_uv_irq(e->pnode, e->offset);
+			rb_erase(n, &uv_irq_root);
+			kfree(e);
+			break;
+		}
+		if (irq < e->irq)
+			n = n->rb_left;
+		else
+			n = n->rb_right;
+	}
+	spin_unlock_irqrestore(&uv_irq_lock, irqflags);
 	destroy_irq(irq);
 }
 EXPORT_SYMBOL_GPL(uv_teardown_irq);
diff --git a/arch/x86/kernel/uv_time.c b/arch/x86/kernel/uv_time.c
index 583f11d..3c84aa0 100644
--- a/arch/x86/kernel/uv_time.c
+++ b/arch/x86/kernel/uv_time.c
@@ -74,7 +74,7 @@
  */
 static struct uv_rtc_timer_head		**blade_info __read_mostly;
 
-static int				uv_rtc_enable;
+static int				uv_rtc_evt_enable;
 
 /*
  * Hardware interface routines
@@ -90,7 +90,7 @@
 	pnode = uv_apicid_to_pnode(apicid);
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
-	      (GENERIC_INTERRUPT_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
+	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
 
 	uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
 }
@@ -115,7 +115,7 @@
 	uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS,
 		UVH_EVENT_OCCURRED0_RTC1_MASK);
 
-	val = (GENERIC_INTERRUPT_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
+	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
 		((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
 
 	/* Set configuration */
@@ -123,7 +123,10 @@
 	/* Initialize comparator value */
 	uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
 
-	return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
+	if (uv_read_rtc(NULL) <= expires)
+		return 0;
+
+	return !uv_intr_pending(pnode);
 }
 
 /*
@@ -223,6 +226,7 @@
 
 	next_cpu = head->next_cpu;
 	*t = expires;
+
 	/* Will this one be next to go off? */
 	if (next_cpu < 0 || bcpu == next_cpu ||
 			expires < head->cpu[next_cpu].expires) {
@@ -231,7 +235,7 @@
 			*t = ULLONG_MAX;
 			uv_rtc_find_next_timer(head, pnode);
 			spin_unlock_irqrestore(&head->lock, flags);
-			return 1;
+			return -ETIME;
 		}
 	}
 
@@ -244,7 +248,7 @@
  *
  * Returns 1 if this timer was pending.
  */
-static int uv_rtc_unset_timer(int cpu)
+static int uv_rtc_unset_timer(int cpu, int force)
 {
 	int pnode = uv_cpu_to_pnode(cpu);
 	int bid = uv_cpu_to_blade_id(cpu);
@@ -256,14 +260,15 @@
 
 	spin_lock_irqsave(&head->lock, flags);
 
-	if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
+	if ((head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t) || force)
 		rc = 1;
 
-	*t = ULLONG_MAX;
-
-	/* Was the hardware setup for this timer? */
-	if (head->next_cpu == bcpu)
-		uv_rtc_find_next_timer(head, pnode);
+	if (rc) {
+		*t = ULLONG_MAX;
+		/* Was the hardware setup for this timer? */
+		if (head->next_cpu == bcpu)
+			uv_rtc_find_next_timer(head, pnode);
+	}
 
 	spin_unlock_irqrestore(&head->lock, flags);
 
@@ -310,32 +315,32 @@
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
-		uv_rtc_unset_timer(ced_cpu);
+		uv_rtc_unset_timer(ced_cpu, 1);
 		break;
 	}
 }
 
 static void uv_rtc_interrupt(void)
 {
-	struct clock_event_device *ced = &__get_cpu_var(cpu_ced);
 	int cpu = smp_processor_id();
+	struct clock_event_device *ced = &per_cpu(cpu_ced, cpu);
 
 	if (!ced || !ced->event_handler)
 		return;
 
-	if (uv_rtc_unset_timer(cpu) != 1)
+	if (uv_rtc_unset_timer(cpu, 0) != 1)
 		return;
 
 	ced->event_handler(ced);
 }
 
-static int __init uv_enable_rtc(char *str)
+static int __init uv_enable_evt_rtc(char *str)
 {
-	uv_rtc_enable = 1;
+	uv_rtc_evt_enable = 1;
 
 	return 1;
 }
-__setup("uvrtc", uv_enable_rtc);
+__setup("uvrtcevt", uv_enable_evt_rtc);
 
 static __init void uv_rtc_register_clockevents(struct work_struct *dummy)
 {
@@ -350,27 +355,32 @@
 {
 	int rc;
 
-	if (!uv_rtc_enable || !is_uv_system() || generic_interrupt_extension)
+	if (!is_uv_system())
 		return -ENODEV;
 
-	generic_interrupt_extension = uv_rtc_interrupt;
-
 	clocksource_uv.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
 				clocksource_uv.shift);
 
+	/* If single blade, prefer tsc */
+	if (uv_num_possible_blades() == 1)
+		clocksource_uv.rating = 250;
+
 	rc = clocksource_register(&clocksource_uv);
-	if (rc) {
-		generic_interrupt_extension = NULL;
+	if (rc)
+		printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
+	else
+		printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
+			sn_rtc_cycles_per_second/(unsigned long)1E6);
+
+	if (rc || !uv_rtc_evt_enable || x86_platform_ipi_callback)
 		return rc;
-	}
 
 	/* Setup and register clockevents */
 	rc = uv_rtc_allocate_timers();
-	if (rc) {
-		clocksource_unregister(&clocksource_uv);
-		generic_interrupt_extension = NULL;
-		return rc;
-	}
+	if (rc)
+		goto error;
+
+	x86_platform_ipi_callback = uv_rtc_interrupt;
 
 	clock_event_device_uv.mult = div_sc(sn_rtc_cycles_per_second,
 				NSEC_PER_SEC, clock_event_device_uv.shift);
@@ -383,11 +393,19 @@
 
 	rc = schedule_on_each_cpu(uv_rtc_register_clockevents);
 	if (rc) {
-		clocksource_unregister(&clocksource_uv);
-		generic_interrupt_extension = NULL;
+		x86_platform_ipi_callback = NULL;
 		uv_rtc_deallocate_timers();
+		goto error;
 	}
 
+	printk(KERN_INFO "UV RTC clockevents registered\n");
+
+	return 0;
+
+error:
+	clocksource_unregister(&clocksource_uv);
+	printk(KERN_INFO "UV RTC clockevents failed rc %d\n", rc);
+
 	return rc;
 }
 arch_initcall(uv_rtc_setup_clock);
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index f068553..34a279a 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -183,7 +183,7 @@
 		return;
 	}
 
-	apic_cpus = apic->apicid_to_cpu_present(m->apicid);
+	apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
 	physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
 	/*
 	 * Validate version
@@ -197,7 +197,7 @@
 	apic_version[m->apicid] = ver;
 }
 
-static void __init visws_find_smp_config(unsigned int reserve)
+static void __init visws_find_smp_config(void)
 {
 	struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
 	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
@@ -486,7 +486,7 @@
 }
 
 static struct irq_chip cobalt_irq_type = {
-	.typename =	"Cobalt-APIC",
+	.name =		"Cobalt-APIC",
 	.startup =	startup_cobalt_irq,
 	.shutdown =	disable_cobalt_irq,
 	.enable =	enable_cobalt_irq,
@@ -523,7 +523,7 @@
 }
 
 static struct irq_chip piix4_master_irq_type = {
-	.typename =	"PIIX4-master",
+	.name =		"PIIX4-master",
 	.startup =	startup_piix4_master_irq,
 	.ack =		ack_cobalt_irq,
 	.end =		end_piix4_master_irq,
@@ -531,7 +531,7 @@
 
 
 static struct irq_chip piix4_virtual_irq_type = {
-	.typename =	"PIIX4-virtual",
+	.name =		"PIIX4-virtual",
 	.shutdown =	disable_8259A_irq,
 	.enable =	enable_8259A_irq,
 	.disable =	disable_8259A_irq,
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 3c68fe2..f3f2104 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -41,6 +41,32 @@
 jiffies_64 = jiffies;
 #endif
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+/*
+ * On 64-bit, align RODATA to 2MB so that even with CONFIG_DEBUG_RODATA
+ * we retain large page mappings for boundaries spanning kernel text, rodata
+ * and data sections.
+ *
+ * However, kernel identity mappings will have different RWX permissions
+ * to the pages mapping to text and to the pages padding (which are freed) the
+ * text section. Hence kernel identity mappings will be broken to smaller
+ * pages. For 64-bit, kernel text and kernel identity mappings are different,
+ * so we can enable protection checks that come with CONFIG_DEBUG_RODATA,
+ * as well as retain 2MB large page mappings for kernel text.
+ */
+#define X64_ALIGN_DEBUG_RODATA_BEGIN	. = ALIGN(HPAGE_SIZE);
+
+#define X64_ALIGN_DEBUG_RODATA_END				\
+		. = ALIGN(HPAGE_SIZE);				\
+		__end_rodata_hpage_align = .;
+
+#else
+
+#define X64_ALIGN_DEBUG_RODATA_BEGIN
+#define X64_ALIGN_DEBUG_RODATA_END
+
+#endif
+
 PHDRS {
 	text PT_LOAD FLAGS(5);          /* R_E */
 	data PT_LOAD FLAGS(7);          /* RWE */
@@ -90,7 +116,9 @@
 
 	EXCEPTION_TABLE(16) :text = 0x9090
 
+	X64_ALIGN_DEBUG_RODATA_BEGIN
 	RO_DATA(PAGE_SIZE)
+	X64_ALIGN_DEBUG_RODATA_END
 
 	/* Data */
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
@@ -107,13 +135,13 @@
 
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
 
-		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 
 		DATA_DATA
 		CONSTRUCTORS
 
 		/* rarely changed data like cpu maps */
-		READ_MOSTLY_DATA(CONFIG_X86_INTERNODE_CACHE_BYTES)
+		READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
 
 		/* End of data section */
 		_edata = .;
@@ -137,12 +165,12 @@
 		*(.vsyscall_0)
 	} :user
 
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
 		*(.vsyscall_fn)
 	}
 
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
 		*(.vsyscall_gtod_data)
 	}
@@ -166,7 +194,7 @@
 	}
 	vgetcpu_mode = VVIRT(.vgetcpu_mode);
 
-	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+	. = ALIGN(L1_CACHE_BYTES);
 	.jiffies : AT(VLOAD(.jiffies)) {
 		*(.jiffies)
 	}
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 8cb4974..e02d92d 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -237,7 +237,7 @@
 };
 
 static ctl_table kernel_root_table2[] = {
-	{ .ctl_name = CTL_KERN, .procname = "kernel", .mode = 0555,
+	{ .procname = "kernel", .mode = 0555,
 	  .child = kernel_table2 },
 	{}
 };
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 3909e3b..a102976 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -30,9 +30,8 @@
 
 EXPORT_SYMBOL(copy_user_generic);
 EXPORT_SYMBOL(__copy_user_nocache);
-EXPORT_SYMBOL(copy_from_user);
-EXPORT_SYMBOL(copy_to_user);
-EXPORT_SYMBOL(__copy_from_user_inatomic);
+EXPORT_SYMBOL(_copy_from_user);
+EXPORT_SYMBOL(_copy_to_user);
 
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 4449a4a..ccd179d 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -13,11 +13,15 @@
 #include <asm/e820.h>
 #include <asm/time.h>
 #include <asm/irq.h>
+#include <asm/pat.h>
 #include <asm/tsc.h>
+#include <asm/iommu.h>
 
 void __cpuinit x86_init_noop(void) { }
 void __init x86_init_uint_noop(unsigned int unused) { }
 void __init x86_init_pgd_noop(pgd_t *unused) { }
+int __init iommu_init_noop(void) { return 0; }
+void iommu_shutdown_noop(void) { }
 
 /*
  * The platform setup functions are preset with the default functions
@@ -62,6 +66,10 @@
 		.tsc_pre_init		= x86_init_noop,
 		.timer_init		= hpet_time_init,
 	},
+
+	.iommu = {
+		.iommu_init		= iommu_init_noop,
+	},
 };
 
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
@@ -72,4 +80,6 @@
 	.calibrate_tsc			= native_calibrate_tsc,
 	.get_wallclock			= mach_get_cmos_time,
 	.set_wallclock			= mach_set_rtc_mmss,
+	.iommu_shutdown			= iommu_shutdown_noop,
+	.is_untracked_pat_range		= is_ISA_range,
 };
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index b84e571..4cd4983 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -28,6 +28,7 @@
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_EVENTFD
 	select KVM_APIC_ARCHITECTURE
+	select USER_RETURN_NOTIFIER
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 0e7fe78..31a7035 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -6,7 +6,8 @@
 CFLAGS_vmx.o := -I.
 
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-				coalesced_mmio.o irq_comm.o eventfd.o)
+				coalesced_mmio.o irq_comm.o eventfd.o \
+				assigned-dev.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
 kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 1be5cd6..7e8faea 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -75,6 +75,8 @@
 #define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
 #define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
 #define GroupMask   0xff        /* Group number stored in bits 0:7 */
+/* Misc flags */
+#define No64	    (1<<28)
 /* Source 2 operand type */
 #define Src2None    (0<<29)
 #define Src2CL      (1<<29)
@@ -92,19 +94,23 @@
 	/* 0x00 - 0x07 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x08 - 0x0F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, 0,
 	/* 0x10 - 0x17 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x18 - 0x1F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
 	/* 0x20 - 0x27 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
@@ -133,7 +139,8 @@
 	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
 	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
 	/* 0x60 - 0x67 */
-	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
+	ImplicitOps | Stack | No64, ImplicitOps | Stack | No64,
+	0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
 	0, 0, 0, 0,
 	/* 0x68 - 0x6F */
 	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
@@ -158,7 +165,7 @@
 	/* 0x90 - 0x97 */
 	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
 	/* 0x98 - 0x9F */
-	0, 0, SrcImm | Src2Imm16, 0,
+	0, 0, SrcImm | Src2Imm16 | No64, 0,
 	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
@@ -185,7 +192,7 @@
 	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
 	/* 0xC8 - 0xCF */
 	0, 0, 0, ImplicitOps | Stack,
-	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
+	ImplicitOps, SrcImmByte, ImplicitOps | No64, ImplicitOps,
 	/* 0xD0 - 0xD7 */
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
 	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
@@ -198,7 +205,7 @@
 	ByteOp | SrcImmUByte, SrcImmUByte,
 	/* 0xE8 - 0xEF */
 	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
+	SrcImmU | Src2Imm16 | No64, SrcImmByte | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xF0 - 0xF7 */
@@ -244,11 +251,13 @@
 	/* 0x90 - 0x9F */
 	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xA0 - 0xA7 */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	ImplicitOps | Stack, ImplicitOps | Stack,
+	0, DstMem | SrcReg | ModRM | BitOp,
 	DstMem | SrcReg | Src2ImmByte | ModRM,
 	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
 	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	ImplicitOps | Stack, ImplicitOps | Stack,
+	0, DstMem | SrcReg | ModRM | BitOp,
 	DstMem | SrcReg | Src2ImmByte | ModRM,
 	DstMem | SrcReg | Src2CL | ModRM,
 	ModRM, 0,
@@ -613,6 +622,9 @@
 {
 	int rc = 0;
 
+	/* x86 instructions are limited to 15 bytes. */
+	if (eip + size - ctxt->decode.eip_orig > 15)
+		return X86EMUL_UNHANDLEABLE;
 	eip += ctxt->cs_base;
 	while (size--) {
 		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
@@ -871,7 +883,7 @@
 	/* Shadow copy of register state. Committed on successful emulation. */
 
 	memset(c, 0, sizeof(struct decode_cache));
-	c->eip = kvm_rip_read(ctxt->vcpu);
+	c->eip = c->eip_orig = kvm_rip_read(ctxt->vcpu);
 	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
@@ -962,6 +974,11 @@
 		}
 	}
 
+	if (mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
+		kvm_report_emulation_failure(ctxt->vcpu, "invalid x86/64 instruction");;
+		return -1;
+	}
+
 	if (c->d & Group) {
 		group = c->d & GroupMask;
 		c->modrm = insn_fetch(u8, 1, c->eip);
@@ -1186,6 +1203,69 @@
 	return rc;
 }
 
+static void emulate_push_sreg(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment segment;
+
+	kvm_x86_ops->get_segment(ctxt->vcpu, &segment, seg);
+
+	c->src.val = segment.selector;
+	emulate_push(ctxt);
+}
+
+static int emulate_pop_sreg(struct x86_emulate_ctxt *ctxt,
+			     struct x86_emulate_ops *ops, int seg)
+{
+	struct decode_cache *c = &ctxt->decode;
+	unsigned long selector;
+	int rc;
+
+	rc = emulate_pop(ctxt, ops, &selector, c->op_bytes);
+	if (rc != 0)
+		return rc;
+
+	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)selector, 1, seg);
+	return rc;
+}
+
+static void emulate_pusha(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	unsigned long old_esp = c->regs[VCPU_REGS_RSP];
+	int reg = VCPU_REGS_RAX;
+
+	while (reg <= VCPU_REGS_RDI) {
+		(reg == VCPU_REGS_RSP) ?
+		(c->src.val = old_esp) : (c->src.val = c->regs[reg]);
+
+		emulate_push(ctxt);
+		++reg;
+	}
+}
+
+static int emulate_popa(struct x86_emulate_ctxt *ctxt,
+			struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+	int reg = VCPU_REGS_RDI;
+
+	while (reg >= VCPU_REGS_RAX) {
+		if (reg == VCPU_REGS_RSP) {
+			register_address_increment(c, &c->regs[VCPU_REGS_RSP],
+							c->op_bytes);
+			--reg;
+		}
+
+		rc = emulate_pop(ctxt, ops, &c->regs[reg], c->op_bytes);
+		if (rc != 0)
+			break;
+		--reg;
+	}
+	return rc;
+}
+
 static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 				struct x86_emulate_ops *ops)
 {
@@ -1707,18 +1787,45 @@
 	      add:		/* add */
 		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x06:		/* push es */
+		emulate_push_sreg(ctxt, VCPU_SREG_ES);
+		break;
+	case 0x07:		/* pop es */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_ES);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x08 ... 0x0d:
 	      or:		/* or */
 		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x0e:		/* push cs */
+		emulate_push_sreg(ctxt, VCPU_SREG_CS);
+		break;
 	case 0x10 ... 0x15:
 	      adc:		/* adc */
 		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x16:		/* push ss */
+		emulate_push_sreg(ctxt, VCPU_SREG_SS);
+		break;
+	case 0x17:		/* pop ss */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_SS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x18 ... 0x1d:
 	      sbb:		/* sbb */
 		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0x1e:		/* push ds */
+		emulate_push_sreg(ctxt, VCPU_SREG_DS);
+		break;
+	case 0x1f:		/* pop ds */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_DS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x20 ... 0x25:
 	      and:		/* and */
 		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
@@ -1750,6 +1857,14 @@
 		if (rc != 0)
 			goto done;
 		break;
+	case 0x60:	/* pusha */
+		emulate_pusha(ctxt);
+		break;
+	case 0x61:	/* popa */
+		rc = emulate_popa(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0x63:		/* movsxd */
 		if (ctxt->mode != X86EMUL_MODE_PROT64)
 			goto cannot_emulate;
@@ -1761,7 +1876,7 @@
 		break;
 	case 0x6c:		/* insb */
 	case 0x6d:		/* insw/insd */
-		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+		 if (kvm_emulate_pio_string(ctxt->vcpu,
 				1,
 				(c->d & ByteOp) ? 1 : c->op_bytes,
 				c->rep_prefix ?
@@ -1777,7 +1892,7 @@
 		return 0;
 	case 0x6e:		/* outsb */
 	case 0x6f:		/* outsw/outsd */
-		if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+		if (kvm_emulate_pio_string(ctxt->vcpu,
 				0,
 				(c->d & ByteOp) ? 1 : c->op_bytes,
 				c->rep_prefix ?
@@ -2070,7 +2185,7 @@
 	case 0xef: /* out (e/r)ax,dx */
 		port = c->regs[VCPU_REGS_RDX];
 		io_dir_in = 0;
-	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
+	do_io:	if (kvm_emulate_pio(ctxt->vcpu, io_dir_in,
 				   (c->d & ByteOp) ? 1 : c->op_bytes,
 				   port) != 0) {
 			c->eip = saved_eip;
@@ -2297,6 +2412,14 @@
 			jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE;
 		break;
+	case 0xa0:	  /* push fs */
+		emulate_push_sreg(ctxt, VCPU_SREG_FS);
+		break;
+	case 0xa1:	 /* pop fs */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_FS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0xa3:
 	      bt:		/* bt */
 		c->dst.type = OP_NONE;
@@ -2308,6 +2431,14 @@
 	case 0xa5: /* shld cl, r, r/m */
 		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
 		break;
+	case 0xa8:	/* push gs */
+		emulate_push_sreg(ctxt, VCPU_SREG_GS);
+		break;
+	case 0xa9:	/* pop gs */
+		rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_GS);
+		if (rc != 0)
+			goto done;
+		break;
 	case 0xab:
 	      bts:		/* bts */
 		/* only subword offset */
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 144e7f6..fab7440 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -688,10 +688,8 @@
 	struct kvm_vcpu *vcpu;
 	int i;
 
-	mutex_lock(&kvm->irq_lock);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
-	mutex_unlock(&kvm->irq_lock);
 
 	/*
 	 * Provides NMI watchdog support via Virtual Wire mode.
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 01f1516..d057c0c 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -38,7 +38,15 @@
 	s->isr_ack |= (1 << irq);
 	if (s != &s->pics_state->pics[0])
 		irq += 8;
+	/*
+	 * We are dropping lock while calling ack notifiers since ack
+	 * notifier callbacks for assigned devices call into PIC recursively.
+	 * Other interrupt may be delivered to PIC while lock is dropped but
+	 * it should be safe since PIC state is already updated at this stage.
+	 */
+	spin_unlock(&s->pics_state->lock);
 	kvm_notify_acked_irq(s->pics_state->kvm, SELECT_PIC(irq), irq);
+	spin_lock(&s->pics_state->lock);
 }
 
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
@@ -176,16 +184,18 @@
 static inline void pic_intack(struct kvm_kpic_state *s, int irq)
 {
 	s->isr |= 1 << irq;
-	if (s->auto_eoi) {
-		if (s->rotate_on_auto_eoi)
-			s->priority_add = (irq + 1) & 7;
-		pic_clear_isr(s, irq);
-	}
 	/*
 	 * We don't clear a level sensitive interrupt here
 	 */
 	if (!(s->elcr & (1 << irq)))
 		s->irr &= ~(1 << irq);
+
+	if (s->auto_eoi) {
+		if (s->rotate_on_auto_eoi)
+			s->priority_add = (irq + 1) & 7;
+		pic_clear_isr(s, irq);
+	}
+
 }
 
 int kvm_pic_read_irq(struct kvm *kvm)
@@ -225,22 +235,11 @@
 
 void kvm_pic_reset(struct kvm_kpic_state *s)
 {
-	int irq, irqbase, n;
+	int irq;
 	struct kvm *kvm = s->pics_state->irq_request_opaque;
 	struct kvm_vcpu *vcpu0 = kvm->bsp_vcpu;
+	u8 irr = s->irr, isr = s->imr;
 
-	if (s == &s->pics_state->pics[0])
-		irqbase = 0;
-	else
-		irqbase = 8;
-
-	for (irq = 0; irq < PIC_NUM_PINS/2; irq++) {
-		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
-			if (s->irr & (1 << irq) || s->isr & (1 << irq)) {
-				n = irq + irqbase;
-				kvm_notify_acked_irq(kvm, SELECT_PIC(n), n);
-			}
-	}
 	s->last_irr = 0;
 	s->irr = 0;
 	s->imr = 0;
@@ -256,6 +255,13 @@
 	s->rotate_on_auto_eoi = 0;
 	s->special_fully_nested_mode = 0;
 	s->init4 = 0;
+
+	for (irq = 0; irq < PIC_NUM_PINS/2; irq++) {
+		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
+			if (irr & (1 << irq) || isr & (1 << irq)) {
+				pic_clear_isr(s, irq);
+			}
+	}
 }
 
 static void pic_ioport_write(void *opaque, u32 addr, u32 val)
@@ -298,9 +304,9 @@
 				priority = get_priority(s, s->isr);
 				if (priority != 8) {
 					irq = (priority + s->priority_add) & 7;
-					pic_clear_isr(s, irq);
 					if (cmd == 5)
 						s->priority_add = (irq + 1) & 7;
+					pic_clear_isr(s, irq);
 					pic_update_irq(s->pics_state);
 				}
 				break;
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 7d6058a..be399e2 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -71,6 +71,7 @@
 	int output;		/* intr from master PIC */
 	struct kvm_io_device dev;
 	void (*ack_notifier)(void *opaque, int irq);
+	unsigned long irq_states[16];
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm);
@@ -85,7 +86,11 @@
 
 static inline int irqchip_in_kernel(struct kvm *kvm)
 {
-	return pic_irqchip(kvm) != NULL;
+	int ret;
+
+	ret = (pic_irqchip(kvm) != NULL);
+	smp_rmb();
+	return ret;
 }
 
 void kvm_pic_reset(struct kvm_kpic_state *s);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 23c2176..cd60c0b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -32,7 +32,6 @@
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
-#include <asm/apicdef.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
@@ -471,11 +470,8 @@
 		trigger_mode = IOAPIC_LEVEL_TRIG;
 	else
 		trigger_mode = IOAPIC_EDGE_TRIG;
-	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)) {
-		mutex_lock(&apic->vcpu->kvm->irq_lock);
+	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI))
 		kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
-		mutex_unlock(&apic->vcpu->kvm->irq_lock);
-	}
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -504,9 +500,7 @@
 		   irq.trig_mode, irq.level, irq.dest_mode, irq.delivery_mode,
 		   irq.vector);
 
-	mutex_lock(&apic->vcpu->kvm->irq_lock);
 	kvm_irq_delivery_to_apic(apic->vcpu->kvm, apic, &irq);
-	mutex_unlock(&apic->vcpu->kvm->irq_lock);
 }
 
 static u32 apic_get_tmcct(struct kvm_lapic *apic)
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 818b92a..4c3e5b2 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2789,7 +2789,7 @@
 	if (r)
 		goto out;
 
-	er = emulate_instruction(vcpu, vcpu->run, cr2, error_code, 0);
+	er = emulate_instruction(vcpu, cr2, error_code, 0);
 
 	switch (er) {
 	case EMULATE_DONE:
@@ -2800,6 +2800,7 @@
 	case EMULATE_FAIL:
 		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+		vcpu->run->internal.ndata = 0;
 		return 0;
 	default:
 		BUG();
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 72558f8..a601713 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -467,7 +467,6 @@
 		level = iterator.level;
 		sptep = iterator.sptep;
 
-		/* FIXME: properly handle invlpg on large guest pages */
 		if (level == PT_PAGE_TABLE_LEVEL  ||
 		    ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
 		    ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index c17404a..3de0b37 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -46,6 +46,7 @@
 #define SVM_FEATURE_NPT  (1 << 0)
 #define SVM_FEATURE_LBRV (1 << 1)
 #define SVM_FEATURE_SVML (1 << 2)
+#define SVM_FEATURE_PAUSE_FILTER (1 << 10)
 
 #define NESTED_EXIT_HOST	0	/* Exit handled on host level */
 #define NESTED_EXIT_DONE	1	/* Exit caused nested vmexit  */
@@ -53,15 +54,6 @@
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
-/* Turn on to get debugging output*/
-/* #define NESTED_DEBUG */
-
-#ifdef NESTED_DEBUG
-#define nsvm_printk(fmt, args...) printk(KERN_INFO fmt, ## args)
-#else
-#define nsvm_printk(fmt, args...) do {} while(0)
-#endif
-
 static const u32 host_save_user_msrs[] = {
 #ifdef CONFIG_X86_64
 	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
@@ -85,6 +77,9 @@
 	/* gpa pointers to the real vectors */
 	u64 vmcb_msrpm;
 
+	/* A VMEXIT is required but not yet emulated */
+	bool exit_required;
+
 	/* cache for intercepts of the guest */
 	u16 intercept_cr_read;
 	u16 intercept_cr_write;
@@ -112,6 +107,8 @@
 	u32 *msrpm;
 
 	struct nested_state nested;
+
+	bool nmi_singlestep;
 };
 
 /* enable NPT for AMD64 and X86 with PAE */
@@ -286,7 +283,7 @@
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	if (!svm->next_rip) {
-		if (emulate_instruction(vcpu, vcpu->run, 0, 0, EMULTYPE_SKIP) !=
+		if (emulate_instruction(vcpu, 0, 0, EMULTYPE_SKIP) !=
 				EMULATE_DONE)
 			printk(KERN_DEBUG "%s: NOP\n", __func__);
 		return;
@@ -316,7 +313,7 @@
 	cpu_svm_disable();
 }
 
-static void svm_hardware_enable(void *garbage)
+static int svm_hardware_enable(void *garbage)
 {
 
 	struct svm_cpu_data *svm_data;
@@ -325,16 +322,21 @@
 	struct desc_struct *gdt;
 	int me = raw_smp_processor_id();
 
+	rdmsrl(MSR_EFER, efer);
+	if (efer & EFER_SVME)
+		return -EBUSY;
+
 	if (!has_svm()) {
-		printk(KERN_ERR "svm_cpu_init: err EOPNOTSUPP on %d\n", me);
-		return;
+		printk(KERN_ERR "svm_hardware_enable: err EOPNOTSUPP on %d\n",
+		       me);
+		return -EINVAL;
 	}
 	svm_data = per_cpu(svm_data, me);
 
 	if (!svm_data) {
-		printk(KERN_ERR "svm_cpu_init: svm_data is NULL on %d\n",
+		printk(KERN_ERR "svm_hardware_enable: svm_data is NULL on %d\n",
 		       me);
-		return;
+		return -EINVAL;
 	}
 
 	svm_data->asid_generation = 1;
@@ -345,11 +347,12 @@
 	gdt = (struct desc_struct *)gdt_descr.base;
 	svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
 
-	rdmsrl(MSR_EFER, efer);
 	wrmsrl(MSR_EFER, efer | EFER_SVME);
 
 	wrmsrl(MSR_VM_HSAVE_PA,
 	       page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
+
+	return 0;
 }
 
 static void svm_cpu_uninit(int cpu)
@@ -476,7 +479,7 @@
 		kvm_enable_efer_bits(EFER_SVME);
 	}
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		r = svm_cpu_init(cpu);
 		if (r)
 			goto err;
@@ -510,7 +513,7 @@
 {
 	int cpu;
 
-	for_each_online_cpu(cpu)
+	for_each_possible_cpu(cpu)
 		svm_cpu_uninit(cpu);
 
 	__free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
@@ -625,11 +628,12 @@
 	save->rip = 0x0000fff0;
 	svm->vcpu.arch.regs[VCPU_REGS_RIP] = save->rip;
 
-	/*
-	 * cr0 val on cpu init should be 0x60000010, we enable cpu
-	 * cache by default. the orderly way is to enable cache in bios.
+	/* This is the guest-visible cr0 value.
+	 * svm_set_cr0() sets PG and WP and clears NW and CD on save->cr0.
 	 */
-	save->cr0 = 0x00000010 | X86_CR0_PG | X86_CR0_WP;
+	svm->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
+	kvm_set_cr0(&svm->vcpu, svm->vcpu.arch.cr0);
+
 	save->cr4 = X86_CR4_PAE;
 	/* rdx = ?? */
 
@@ -644,8 +648,6 @@
 		control->intercept_cr_write &= ~(INTERCEPT_CR0_MASK|
 						 INTERCEPT_CR3_MASK);
 		save->g_pat = 0x0007040600070406ULL;
-		/* enable caching because the QEMU Bios doesn't enable it */
-		save->cr0 = X86_CR0_ET;
 		save->cr3 = 0;
 		save->cr4 = 0;
 	}
@@ -654,6 +656,11 @@
 	svm->nested.vmcb = 0;
 	svm->vcpu.arch.hflags = 0;
 
+	if (svm_has(SVM_FEATURE_PAUSE_FILTER)) {
+		control->pause_filter_count = 3000;
+		control->intercept |= (1ULL << INTERCEPT_PAUSE);
+	}
+
 	enable_gif(svm);
 }
 
@@ -758,14 +765,13 @@
 	int i;
 
 	if (unlikely(cpu != vcpu->cpu)) {
-		u64 tsc_this, delta;
+		u64 delta;
 
 		/*
 		 * Make sure that the guest sees a monotonically
 		 * increasing TSC.
 		 */
-		rdtscll(tsc_this);
-		delta = vcpu->arch.host_tsc - tsc_this;
+		delta = vcpu->arch.host_tsc - native_read_tsc();
 		svm->vmcb->control.tsc_offset += delta;
 		if (is_nested(svm))
 			svm->nested.hsave->control.tsc_offset += delta;
@@ -787,7 +793,7 @@
 	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
 		wrmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]);
 
-	rdtscll(vcpu->arch.host_tsc);
+	vcpu->arch.host_tsc = native_read_tsc();
 }
 
 static unsigned long svm_get_rflags(struct kvm_vcpu *vcpu)
@@ -1045,7 +1051,7 @@
 	svm->vmcb->control.intercept_exceptions &=
 		~((1 << DB_VECTOR) | (1 << BP_VECTOR));
 
-	if (vcpu->arch.singlestep)
+	if (svm->nmi_singlestep)
 		svm->vmcb->control.intercept_exceptions |= (1 << DB_VECTOR);
 
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
@@ -1060,26 +1066,16 @@
 		vcpu->guest_debug = 0;
 }
 
-static int svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
+static void svm_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 {
-	int old_debug = vcpu->guest_debug;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	vcpu->guest_debug = dbg->control;
-
-	update_db_intercept(vcpu);
-
 	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
 		svm->vmcb->save.dr7 = dbg->arch.debugreg[7];
 	else
 		svm->vmcb->save.dr7 = vcpu->arch.dr7;
 
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		svm->vmcb->save.rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
-	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
-		svm->vmcb->save.rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-
-	return 0;
+	update_db_intercept(vcpu);
 }
 
 static void load_host_msrs(struct kvm_vcpu *vcpu)
@@ -1180,7 +1176,7 @@
 	}
 }
 
-static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int pf_interception(struct vcpu_svm *svm)
 {
 	u64 fault_address;
 	u32 error_code;
@@ -1194,17 +1190,19 @@
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
-static int db_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int db_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	if (!(svm->vcpu.guest_debug &
 	      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP)) &&
-		!svm->vcpu.arch.singlestep) {
+		!svm->nmi_singlestep) {
 		kvm_queue_exception(&svm->vcpu, DB_VECTOR);
 		return 1;
 	}
 
-	if (svm->vcpu.arch.singlestep) {
-		svm->vcpu.arch.singlestep = false;
+	if (svm->nmi_singlestep) {
+		svm->nmi_singlestep = false;
 		if (!(svm->vcpu.guest_debug & KVM_GUESTDBG_SINGLESTEP))
 			svm->vmcb->save.rflags &=
 				~(X86_EFLAGS_TF | X86_EFLAGS_RF);
@@ -1223,25 +1221,27 @@
 	return 1;
 }
 
-static int bp_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int bp_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	kvm_run->exit_reason = KVM_EXIT_DEBUG;
 	kvm_run->debug.arch.pc = svm->vmcb->save.cs.base + svm->vmcb->save.rip;
 	kvm_run->debug.arch.exception = BP_VECTOR;
 	return 0;
 }
 
-static int ud_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int ud_interception(struct vcpu_svm *svm)
 {
 	int er;
 
-	er = emulate_instruction(&svm->vcpu, kvm_run, 0, 0, EMULTYPE_TRAP_UD);
+	er = emulate_instruction(&svm->vcpu, 0, 0, EMULTYPE_TRAP_UD);
 	if (er != EMULATE_DONE)
 		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 	return 1;
 }
 
-static int nm_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int nm_interception(struct vcpu_svm *svm)
 {
 	svm->vmcb->control.intercept_exceptions &= ~(1 << NM_VECTOR);
 	if (!(svm->vcpu.arch.cr0 & X86_CR0_TS))
@@ -1251,7 +1251,7 @@
 	return 1;
 }
 
-static int mc_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int mc_interception(struct vcpu_svm *svm)
 {
 	/*
 	 * On an #MC intercept the MCE handler is not called automatically in
@@ -1264,8 +1264,10 @@
 	return 1;
 }
 
-static int shutdown_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int shutdown_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	/*
 	 * VMCB is undefined after a SHUTDOWN intercept
 	 * so reinitialize it.
@@ -1277,7 +1279,7 @@
 	return 0;
 }
 
-static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int io_interception(struct vcpu_svm *svm)
 {
 	u32 io_info = svm->vmcb->control.exit_info_1; /* address size bug? */
 	int size, in, string;
@@ -1291,7 +1293,7 @@
 
 	if (string) {
 		if (emulate_instruction(&svm->vcpu,
-					kvm_run, 0, 0, 0) == EMULATE_DO_MMIO)
+					0, 0, 0) == EMULATE_DO_MMIO)
 			return 0;
 		return 1;
 	}
@@ -1301,33 +1303,33 @@
 	size = (io_info & SVM_IOIO_SIZE_MASK) >> SVM_IOIO_SIZE_SHIFT;
 
 	skip_emulated_instruction(&svm->vcpu);
-	return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
+	return kvm_emulate_pio(&svm->vcpu, in, size, port);
 }
 
-static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int nmi_interception(struct vcpu_svm *svm)
 {
 	return 1;
 }
 
-static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int intr_interception(struct vcpu_svm *svm)
 {
 	++svm->vcpu.stat.irq_exits;
 	return 1;
 }
 
-static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int nop_on_interception(struct vcpu_svm *svm)
 {
 	return 1;
 }
 
-static int halt_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int halt_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 1;
 	skip_emulated_instruction(&svm->vcpu);
 	return kvm_emulate_halt(&svm->vcpu);
 }
 
-static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmmcall_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
@@ -1378,8 +1380,15 @@
 
 	svm->vmcb->control.exit_code = SVM_EXIT_INTR;
 
-	if (nested_svm_exit_handled(svm)) {
-		nsvm_printk("VMexit -> INTR\n");
+	if (svm->nested.intercept & 1ULL) {
+		/*
+		 * The #vmexit can't be emulated here directly because this
+		 * code path runs with irqs and preemtion disabled. A
+		 * #vmexit emulation might sleep. Only signal request for
+		 * the #vmexit here.
+		 */
+		svm->nested.exit_required = true;
+		trace_kvm_nested_intr_vmexit(svm->vmcb->save.rip);
 		return 1;
 	}
 
@@ -1390,10 +1399,7 @@
 {
 	struct page *page;
 
-	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
-
 	if (is_error_page(page))
 		goto error;
 
@@ -1532,14 +1538,12 @@
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
-		nsvm_printk("exit code: 0x%x\n", exit_code);
 		if (svm->nested.intercept & exit_bits)
 			vmexit = NESTED_EXIT_DONE;
 	}
 	}
 
 	if (vmexit == NESTED_EXIT_DONE) {
-		nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
 		nested_svm_vmexit(svm);
 	}
 
@@ -1584,6 +1588,12 @@
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
+	trace_kvm_nested_vmexit_inject(vmcb->control.exit_code,
+				       vmcb->control.exit_info_1,
+				       vmcb->control.exit_info_2,
+				       vmcb->control.exit_int_info,
+				       vmcb->control.exit_int_info_err);
+
 	nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, KM_USER0);
 	if (!nested_vmcb)
 		return 1;
@@ -1617,6 +1627,22 @@
 	nested_vmcb->control.exit_info_2       = vmcb->control.exit_info_2;
 	nested_vmcb->control.exit_int_info     = vmcb->control.exit_int_info;
 	nested_vmcb->control.exit_int_info_err = vmcb->control.exit_int_info_err;
+
+	/*
+	 * If we emulate a VMRUN/#VMEXIT in the same host #vmexit cycle we have
+	 * to make sure that we do not lose injected events. So check event_inj
+	 * here and copy it to exit_int_info if it is valid.
+	 * Exit_int_info and event_inj can't be both valid because the case
+	 * below only happens on a VMRUN instruction intercept which has
+	 * no valid exit_int_info set.
+	 */
+	if (vmcb->control.event_inj & SVM_EVTINJ_VALID) {
+		struct vmcb_control_area *nc = &nested_vmcb->control;
+
+		nc->exit_int_info     = vmcb->control.event_inj;
+		nc->exit_int_info_err = vmcb->control.event_inj_err;
+	}
+
 	nested_vmcb->control.tlb_ctl           = 0;
 	nested_vmcb->control.event_inj         = 0;
 	nested_vmcb->control.event_inj_err     = 0;
@@ -1628,10 +1654,6 @@
 	/* Restore the original control entries */
 	copy_vmcb_control_area(vmcb, hsave);
 
-	/* Kill any pending exceptions */
-	if (svm->vcpu.arch.exception.pending == true)
-		nsvm_printk("WARNING: Pending Exception\n");
-
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
 
@@ -1702,6 +1724,12 @@
 	/* nested_vmcb is our indicator if nested SVM is activated */
 	svm->nested.vmcb = svm->vmcb->save.rax;
 
+	trace_kvm_nested_vmrun(svm->vmcb->save.rip - 3, svm->nested.vmcb,
+			       nested_vmcb->save.rip,
+			       nested_vmcb->control.int_ctl,
+			       nested_vmcb->control.event_inj,
+			       nested_vmcb->control.nested_ctl);
+
 	/* Clear internal status */
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
@@ -1789,28 +1817,15 @@
 	svm->nested.intercept            = nested_vmcb->control.intercept;
 
 	force_new_asid(&svm->vcpu);
-	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
-	svm->vmcb->control.exit_int_info_err = nested_vmcb->control.exit_int_info_err;
 	svm->vmcb->control.int_ctl = nested_vmcb->control.int_ctl | V_INTR_MASKING_MASK;
-	if (nested_vmcb->control.int_ctl & V_IRQ_MASK) {
-		nsvm_printk("nSVM Injecting Interrupt: 0x%x\n",
-				nested_vmcb->control.int_ctl);
-	}
 	if (nested_vmcb->control.int_ctl & V_INTR_MASKING_MASK)
 		svm->vcpu.arch.hflags |= HF_VINTR_MASK;
 	else
 		svm->vcpu.arch.hflags &= ~HF_VINTR_MASK;
 
-	nsvm_printk("nSVM exit_int_info: 0x%x | int_state: 0x%x\n",
-			nested_vmcb->control.exit_int_info,
-			nested_vmcb->control.int_state);
-
 	svm->vmcb->control.int_vector = nested_vmcb->control.int_vector;
 	svm->vmcb->control.int_state = nested_vmcb->control.int_state;
 	svm->vmcb->control.tsc_offset += nested_vmcb->control.tsc_offset;
-	if (nested_vmcb->control.event_inj & SVM_EVTINJ_VALID)
-		nsvm_printk("Injecting Event: 0x%x\n",
-				nested_vmcb->control.event_inj);
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
@@ -1837,7 +1852,7 @@
 	to_vmcb->save.sysenter_eip = from_vmcb->save.sysenter_eip;
 }
 
-static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmload_interception(struct vcpu_svm *svm)
 {
 	struct vmcb *nested_vmcb;
 
@@ -1857,7 +1872,7 @@
 	return 1;
 }
 
-static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmsave_interception(struct vcpu_svm *svm)
 {
 	struct vmcb *nested_vmcb;
 
@@ -1877,10 +1892,8 @@
 	return 1;
 }
 
-static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int vmrun_interception(struct vcpu_svm *svm)
 {
-	nsvm_printk("VMrun\n");
-
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
@@ -1907,7 +1920,7 @@
 	return 1;
 }
 
-static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int stgi_interception(struct vcpu_svm *svm)
 {
 	if (nested_svm_check_permissions(svm))
 		return 1;
@@ -1920,7 +1933,7 @@
 	return 1;
 }
 
-static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int clgi_interception(struct vcpu_svm *svm)
 {
 	if (nested_svm_check_permissions(svm))
 		return 1;
@@ -1937,10 +1950,12 @@
 	return 1;
 }
 
-static int invlpga_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int invlpga_interception(struct vcpu_svm *svm)
 {
 	struct kvm_vcpu *vcpu = &svm->vcpu;
-	nsvm_printk("INVLPGA\n");
+
+	trace_kvm_invlpga(svm->vmcb->save.rip, vcpu->arch.regs[VCPU_REGS_RCX],
+			  vcpu->arch.regs[VCPU_REGS_RAX]);
 
 	/* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
 	kvm_mmu_invlpg(vcpu, vcpu->arch.regs[VCPU_REGS_RAX]);
@@ -1950,15 +1965,21 @@
 	return 1;
 }
 
-static int invalid_op_interception(struct vcpu_svm *svm,
-				   struct kvm_run *kvm_run)
+static int skinit_interception(struct vcpu_svm *svm)
+{
+	trace_kvm_skinit(svm->vmcb->save.rip, svm->vcpu.arch.regs[VCPU_REGS_RAX]);
+
+	kvm_queue_exception(&svm->vcpu, UD_VECTOR);
+	return 1;
+}
+
+static int invalid_op_interception(struct vcpu_svm *svm)
 {
 	kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 	return 1;
 }
 
-static int task_switch_interception(struct vcpu_svm *svm,
-				    struct kvm_run *kvm_run)
+static int task_switch_interception(struct vcpu_svm *svm)
 {
 	u16 tss_selector;
 	int reason;
@@ -2008,14 +2029,14 @@
 	return kvm_task_switch(&svm->vcpu, tss_selector, reason);
 }
 
-static int cpuid_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int cpuid_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 	kvm_emulate_cpuid(&svm->vcpu);
 	return 1;
 }
 
-static int iret_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int iret_interception(struct vcpu_svm *svm)
 {
 	++svm->vcpu.stat.nmi_window_exits;
 	svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
@@ -2023,26 +2044,27 @@
 	return 1;
 }
 
-static int invlpg_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int invlpg_interception(struct vcpu_svm *svm)
 {
-	if (emulate_instruction(&svm->vcpu, kvm_run, 0, 0, 0) != EMULATE_DONE)
+	if (emulate_instruction(&svm->vcpu, 0, 0, 0) != EMULATE_DONE)
 		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
 	return 1;
 }
 
-static int emulate_on_interception(struct vcpu_svm *svm,
-				   struct kvm_run *kvm_run)
+static int emulate_on_interception(struct vcpu_svm *svm)
 {
-	if (emulate_instruction(&svm->vcpu, NULL, 0, 0, 0) != EMULATE_DONE)
+	if (emulate_instruction(&svm->vcpu, 0, 0, 0) != EMULATE_DONE)
 		pr_unimpl(&svm->vcpu, "%s: failed\n", __func__);
 	return 1;
 }
 
-static int cr8_write_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int cr8_write_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	u8 cr8_prev = kvm_get_cr8(&svm->vcpu);
 	/* instruction emulation calls kvm_set_cr8() */
-	emulate_instruction(&svm->vcpu, NULL, 0, 0, 0);
+	emulate_instruction(&svm->vcpu, 0, 0, 0);
 	if (irqchip_in_kernel(svm->vcpu.kvm)) {
 		svm->vmcb->control.intercept_cr_write &= ~INTERCEPT_CR8_MASK;
 		return 1;
@@ -2128,7 +2150,7 @@
 	return 0;
 }
 
-static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int rdmsr_interception(struct vcpu_svm *svm)
 {
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data;
@@ -2221,7 +2243,7 @@
 	return 0;
 }
 
-static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int wrmsr_interception(struct vcpu_svm *svm)
 {
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
@@ -2237,17 +2259,18 @@
 	return 1;
 }
 
-static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+static int msr_interception(struct vcpu_svm *svm)
 {
 	if (svm->vmcb->control.exit_info_1)
-		return wrmsr_interception(svm, kvm_run);
+		return wrmsr_interception(svm);
 	else
-		return rdmsr_interception(svm, kvm_run);
+		return rdmsr_interception(svm);
 }
 
-static int interrupt_window_interception(struct vcpu_svm *svm,
-				   struct kvm_run *kvm_run)
+static int interrupt_window_interception(struct vcpu_svm *svm)
 {
+	struct kvm_run *kvm_run = svm->vcpu.run;
+
 	svm_clear_vintr(svm);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -2265,8 +2288,13 @@
 	return 1;
 }
 
-static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
-				      struct kvm_run *kvm_run) = {
+static int pause_interception(struct vcpu_svm *svm)
+{
+	kvm_vcpu_on_spin(&(svm->vcpu));
+	return 1;
+}
+
+static int (*svm_exit_handlers[])(struct vcpu_svm *svm) = {
 	[SVM_EXIT_READ_CR0]           		= emulate_on_interception,
 	[SVM_EXIT_READ_CR3]           		= emulate_on_interception,
 	[SVM_EXIT_READ_CR4]           		= emulate_on_interception,
@@ -2301,6 +2329,7 @@
 	[SVM_EXIT_CPUID]			= cpuid_interception,
 	[SVM_EXIT_IRET]                         = iret_interception,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
+	[SVM_EXIT_PAUSE]			= pause_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= invlpg_interception,
 	[SVM_EXIT_INVLPGA]			= invlpga_interception,
@@ -2314,26 +2343,36 @@
 	[SVM_EXIT_VMSAVE]			= vmsave_interception,
 	[SVM_EXIT_STGI]				= stgi_interception,
 	[SVM_EXIT_CLGI]				= clgi_interception,
-	[SVM_EXIT_SKINIT]			= invalid_op_interception,
+	[SVM_EXIT_SKINIT]			= skinit_interception,
 	[SVM_EXIT_WBINVD]                       = emulate_on_interception,
 	[SVM_EXIT_MONITOR]			= invalid_op_interception,
 	[SVM_EXIT_MWAIT]			= invalid_op_interception,
 	[SVM_EXIT_NPF]				= pf_interception,
 };
 
-static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+static int handle_exit(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
+	struct kvm_run *kvm_run = vcpu->run;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
 	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
 
+	if (unlikely(svm->nested.exit_required)) {
+		nested_svm_vmexit(svm);
+		svm->nested.exit_required = false;
+
+		return 1;
+	}
+
 	if (is_nested(svm)) {
 		int vmexit;
 
-		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
-			    exit_code, svm->vmcb->control.exit_info_1,
-			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
+		trace_kvm_nested_vmexit(svm->vmcb->save.rip, exit_code,
+					svm->vmcb->control.exit_info_1,
+					svm->vmcb->control.exit_info_2,
+					svm->vmcb->control.exit_int_info,
+					svm->vmcb->control.exit_int_info_err);
 
 		vmexit = nested_svm_exit_special(svm);
 
@@ -2383,7 +2422,7 @@
 		return 0;
 	}
 
-	return svm_exit_handlers[exit_code](svm, kvm_run);
+	return svm_exit_handlers[exit_code](svm);
 }
 
 static void reload_tss(struct kvm_vcpu *vcpu)
@@ -2460,20 +2499,47 @@
 		!(svm->vcpu.arch.hflags & HF_NMI_MASK);
 }
 
+static bool svm_get_nmi_mask(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	return !!(svm->vcpu.arch.hflags & HF_NMI_MASK);
+}
+
+static void svm_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
+{
+	struct vcpu_svm *svm = to_svm(vcpu);
+
+	if (masked) {
+		svm->vcpu.arch.hflags |= HF_NMI_MASK;
+		svm->vmcb->control.intercept |= (1UL << INTERCEPT_IRET);
+	} else {
+		svm->vcpu.arch.hflags &= ~HF_NMI_MASK;
+		svm->vmcb->control.intercept &= ~(1UL << INTERCEPT_IRET);
+	}
+}
+
 static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	struct vmcb *vmcb = svm->vmcb;
-	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
-		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		gif_set(svm) &&
-		!(is_nested(svm) && (svm->vcpu.arch.hflags & HF_VINTR_MASK));
+	int ret;
+
+	if (!gif_set(svm) ||
+	     (vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK))
+		return 0;
+
+	ret = !!(vmcb->save.rflags & X86_EFLAGS_IF);
+
+	if (is_nested(svm))
+		return ret && !(svm->vcpu.arch.hflags & HF_VINTR_MASK);
+
+	return ret;
 }
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
-	nsvm_printk("Trying to open IRQ window\n");
 
 	nested_svm_intr(svm);
 
@@ -2498,7 +2564,7 @@
 	/* Something prevents NMI from been injected. Single step over
 	   possible problem (IRET or exception injection or interrupt
 	   shadow) */
-	vcpu->arch.singlestep = true;
+	svm->nmi_singlestep = true;
 	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
 	update_db_intercept(vcpu);
 }
@@ -2588,13 +2654,20 @@
 #define R "e"
 #endif
 
-static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u16 fs_selector;
 	u16 gs_selector;
 	u16 ldt_selector;
 
+	/*
+	 * A vmexit emulation is required before the vcpu can be executed
+	 * again.
+	 */
+	if (unlikely(svm->nested.exit_required))
+		return;
+
 	svm->vmcb->save.rax = vcpu->arch.regs[VCPU_REGS_RAX];
 	svm->vmcb->save.rsp = vcpu->arch.regs[VCPU_REGS_RSP];
 	svm->vmcb->save.rip = vcpu->arch.regs[VCPU_REGS_RIP];
@@ -2893,6 +2966,8 @@
 	.queue_exception = svm_queue_exception,
 	.interrupt_allowed = svm_interrupt_allowed,
 	.nmi_allowed = svm_nmi_allowed,
+	.get_nmi_mask = svm_get_nmi_mask,
+	.set_nmi_mask = svm_set_nmi_mask,
 	.enable_nmi_window = enable_nmi_window,
 	.enable_irq_window = enable_irq_window,
 	.update_cr8_intercept = update_cr8_intercept,
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 0d480e7..816e044 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -349,6 +349,171 @@
 		  __entry->coalesced ? " (coalesced)" : "")
 );
 
+/*
+ * Tracepoint for nested VMRUN
+ */
+TRACE_EVENT(kvm_nested_vmrun,
+	    TP_PROTO(__u64 rip, __u64 vmcb, __u64 nested_rip, __u32 int_ctl,
+		     __u32 event_inj, bool npt),
+	    TP_ARGS(rip, vmcb, nested_rip, int_ctl, event_inj, npt),
+
+	TP_STRUCT__entry(
+		__field(	__u64,		rip		)
+		__field(	__u64,		vmcb		)
+		__field(	__u64,		nested_rip	)
+		__field(	__u32,		int_ctl		)
+		__field(	__u32,		event_inj	)
+		__field(	bool,		npt		)
+	),
+
+	TP_fast_assign(
+		__entry->rip		= rip;
+		__entry->vmcb		= vmcb;
+		__entry->nested_rip	= nested_rip;
+		__entry->int_ctl	= int_ctl;
+		__entry->event_inj	= event_inj;
+		__entry->npt		= npt;
+	),
+
+	TP_printk("rip: 0x%016llx vmcb: 0x%016llx nrip: 0x%016llx int_ctl: 0x%08x "
+		  "event_inj: 0x%08x npt: %s\n",
+		__entry->rip, __entry->vmcb, __entry->nested_rip,
+		__entry->int_ctl, __entry->event_inj,
+		__entry->npt ? "on" : "off")
+);
+
+/*
+ * Tracepoint for #VMEXIT while nested
+ */
+TRACE_EVENT(kvm_nested_vmexit,
+	    TP_PROTO(__u64 rip, __u32 exit_code,
+		     __u64 exit_info1, __u64 exit_info2,
+		     __u32 exit_int_info, __u32 exit_int_info_err),
+	    TP_ARGS(rip, exit_code, exit_info1, exit_info2,
+		    exit_int_info, exit_int_info_err),
+
+	TP_STRUCT__entry(
+		__field(	__u64,		rip			)
+		__field(	__u32,		exit_code		)
+		__field(	__u64,		exit_info1		)
+		__field(	__u64,		exit_info2		)
+		__field(	__u32,		exit_int_info		)
+		__field(	__u32,		exit_int_info_err	)
+	),
+
+	TP_fast_assign(
+		__entry->rip			= rip;
+		__entry->exit_code		= exit_code;
+		__entry->exit_info1		= exit_info1;
+		__entry->exit_info2		= exit_info2;
+		__entry->exit_int_info		= exit_int_info;
+		__entry->exit_int_info_err	= exit_int_info_err;
+	),
+	TP_printk("rip: 0x%016llx reason: %s ext_inf1: 0x%016llx "
+		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x\n",
+		  __entry->rip,
+		  ftrace_print_symbols_seq(p, __entry->exit_code,
+					   kvm_x86_ops->exit_reasons_str),
+		  __entry->exit_info1, __entry->exit_info2,
+		  __entry->exit_int_info, __entry->exit_int_info_err)
+);
+
+/*
+ * Tracepoint for #VMEXIT reinjected to the guest
+ */
+TRACE_EVENT(kvm_nested_vmexit_inject,
+	    TP_PROTO(__u32 exit_code,
+		     __u64 exit_info1, __u64 exit_info2,
+		     __u32 exit_int_info, __u32 exit_int_info_err),
+	    TP_ARGS(exit_code, exit_info1, exit_info2,
+		    exit_int_info, exit_int_info_err),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		exit_code		)
+		__field(	__u64,		exit_info1		)
+		__field(	__u64,		exit_info2		)
+		__field(	__u32,		exit_int_info		)
+		__field(	__u32,		exit_int_info_err	)
+	),
+
+	TP_fast_assign(
+		__entry->exit_code		= exit_code;
+		__entry->exit_info1		= exit_info1;
+		__entry->exit_info2		= exit_info2;
+		__entry->exit_int_info		= exit_int_info;
+		__entry->exit_int_info_err	= exit_int_info_err;
+	),
+
+	TP_printk("reason: %s ext_inf1: 0x%016llx "
+		  "ext_inf2: 0x%016llx ext_int: 0x%08x ext_int_err: 0x%08x\n",
+		  ftrace_print_symbols_seq(p, __entry->exit_code,
+					   kvm_x86_ops->exit_reasons_str),
+		__entry->exit_info1, __entry->exit_info2,
+		__entry->exit_int_info, __entry->exit_int_info_err)
+);
+
+/*
+ * Tracepoint for nested #vmexit because of interrupt pending
+ */
+TRACE_EVENT(kvm_nested_intr_vmexit,
+	    TP_PROTO(__u64 rip),
+	    TP_ARGS(rip),
+
+	TP_STRUCT__entry(
+		__field(	__u64,	rip	)
+	),
+
+	TP_fast_assign(
+		__entry->rip	=	rip
+	),
+
+	TP_printk("rip: 0x%016llx\n", __entry->rip)
+);
+
+/*
+ * Tracepoint for nested #vmexit because of interrupt pending
+ */
+TRACE_EVENT(kvm_invlpga,
+	    TP_PROTO(__u64 rip, int asid, u64 address),
+	    TP_ARGS(rip, asid, address),
+
+	TP_STRUCT__entry(
+		__field(	__u64,	rip	)
+		__field(	int,	asid	)
+		__field(	__u64,	address	)
+	),
+
+	TP_fast_assign(
+		__entry->rip		=	rip;
+		__entry->asid		=	asid;
+		__entry->address	=	address;
+	),
+
+	TP_printk("rip: 0x%016llx asid: %d address: 0x%016llx\n",
+		  __entry->rip, __entry->asid, __entry->address)
+);
+
+/*
+ * Tracepoint for nested #vmexit because of interrupt pending
+ */
+TRACE_EVENT(kvm_skinit,
+	    TP_PROTO(__u64 rip, __u32 slb),
+	    TP_ARGS(rip, slb),
+
+	TP_STRUCT__entry(
+		__field(	__u64,	rip	)
+		__field(	__u32,	slb	)
+	),
+
+	TP_fast_assign(
+		__entry->rip		=	rip;
+		__entry->slb		=	slb;
+	),
+
+	TP_printk("rip: 0x%016llx slb: 0x%08x\n",
+		  __entry->rip, __entry->slb)
+);
+
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ed53b42..d4918d6 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -61,12 +61,37 @@
 static int __read_mostly emulate_invalid_guest_state = 0;
 module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
+/*
+ * These 2 parameters are used to config the controls for Pause-Loop Exiting:
+ * ple_gap:    upper bound on the amount of time between two successive
+ *             executions of PAUSE in a loop. Also indicate if ple enabled.
+ *             According to test, this time is usually small than 41 cycles.
+ * ple_window: upper bound on the amount of time a guest is allowed to execute
+ *             in a PAUSE loop. Tests indicate that most spinlocks are held for
+ *             less than 2^12 cycles
+ * Time is measured based on a counter that runs at the same rate as the TSC,
+ * refer SDM volume 3b section 21.6.13 & 22.1.3.
+ */
+#define KVM_VMX_DEFAULT_PLE_GAP    41
+#define KVM_VMX_DEFAULT_PLE_WINDOW 4096
+static int ple_gap = KVM_VMX_DEFAULT_PLE_GAP;
+module_param(ple_gap, int, S_IRUGO);
+
+static int ple_window = KVM_VMX_DEFAULT_PLE_WINDOW;
+module_param(ple_window, int, S_IRUGO);
+
 struct vmcs {
 	u32 revision_id;
 	u32 abort;
 	char data[0];
 };
 
+struct shared_msr_entry {
+	unsigned index;
+	u64 data;
+	u64 mask;
+};
+
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
 	struct list_head      local_vcpus_link;
@@ -74,13 +99,12 @@
 	int                   launched;
 	u8                    fail;
 	u32                   idt_vectoring_info;
-	struct kvm_msr_entry *guest_msrs;
-	struct kvm_msr_entry *host_msrs;
+	struct shared_msr_entry *guest_msrs;
 	int                   nmsrs;
 	int                   save_nmsrs;
-	int                   msr_offset_efer;
 #ifdef CONFIG_X86_64
-	int                   msr_offset_kernel_gs_base;
+	u64 		      msr_host_kernel_gs_base;
+	u64 		      msr_guest_kernel_gs_base;
 #endif
 	struct vmcs          *vmcs;
 	struct {
@@ -88,7 +112,6 @@
 		u16           fs_sel, gs_sel, ldt_sel;
 		int           gs_ldt_reload_needed;
 		int           fs_reload_needed;
-		int           guest_efer_loaded;
 	} host_state;
 	struct {
 		int vm86_active;
@@ -107,7 +130,6 @@
 	} rmode;
 	int vpid;
 	bool emulation_required;
-	enum emulation_result invalid_state_emulation_result;
 
 	/* Support for vnmi-less CPUs */
 	int soft_vnmi_blocked;
@@ -176,6 +198,8 @@
 	VMX_SEGMENT_FIELD(LDTR),
 };
 
+static u64 host_efer;
+
 static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
 
 /*
@@ -184,28 +208,12 @@
  */
 static const u32 vmx_msr_index[] = {
 #ifdef CONFIG_X86_64
-	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR, MSR_KERNEL_GS_BASE,
+	MSR_SYSCALL_MASK, MSR_LSTAR, MSR_CSTAR,
 #endif
 	MSR_EFER, MSR_K6_STAR,
 };
 #define NR_VMX_MSR ARRAY_SIZE(vmx_msr_index)
 
-static void load_msrs(struct kvm_msr_entry *e, int n)
-{
-	int i;
-
-	for (i = 0; i < n; ++i)
-		wrmsrl(e[i].index, e[i].data);
-}
-
-static void save_msrs(struct kvm_msr_entry *e, int n)
-{
-	int i;
-
-	for (i = 0; i < n; ++i)
-		rdmsrl(e[i].index, e[i].data);
-}
-
 static inline int is_page_fault(u32 intr_info)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
@@ -320,6 +328,12 @@
 		SECONDARY_EXEC_UNRESTRICTED_GUEST;
 }
 
+static inline int cpu_has_vmx_ple(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_PAUSE_LOOP_EXITING;
+}
+
 static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
 	return flexpriority_enabled &&
@@ -348,7 +362,7 @@
 	int i;
 
 	for (i = 0; i < vmx->nmsrs; ++i)
-		if (vmx->guest_msrs[i].index == msr)
+		if (vmx_msr_index[vmx->guest_msrs[i].index] == msr)
 			return i;
 	return -1;
 }
@@ -379,7 +393,7 @@
 			: : "a" (&operand), "c" (ext) : "cc", "memory");
 }
 
-static struct kvm_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
+static struct shared_msr_entry *find_msr_entry(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
 
@@ -570,17 +584,12 @@
 	load_TR_desc();
 }
 
-static void load_transition_efer(struct vcpu_vmx *vmx)
+static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 {
-	int efer_offset = vmx->msr_offset_efer;
-	u64 host_efer;
 	u64 guest_efer;
 	u64 ignore_bits;
 
-	if (efer_offset < 0)
-		return;
-	host_efer = vmx->host_msrs[efer_offset].data;
-	guest_efer = vmx->guest_msrs[efer_offset].data;
+	guest_efer = vmx->vcpu.arch.shadow_efer;
 
 	/*
 	 * NX is emulated; LMA and LME handled by hardware; SCE meaninless
@@ -593,27 +602,17 @@
 	if (guest_efer & EFER_LMA)
 		ignore_bits &= ~(u64)EFER_SCE;
 #endif
-	if ((guest_efer & ~ignore_bits) == (host_efer & ~ignore_bits))
-		return;
-
-	vmx->host_state.guest_efer_loaded = 1;
 	guest_efer &= ~ignore_bits;
 	guest_efer |= host_efer & ignore_bits;
-	wrmsrl(MSR_EFER, guest_efer);
-	vmx->vcpu.stat.efer_reload++;
-}
-
-static void reload_host_efer(struct vcpu_vmx *vmx)
-{
-	if (vmx->host_state.guest_efer_loaded) {
-		vmx->host_state.guest_efer_loaded = 0;
-		load_msrs(vmx->host_msrs + vmx->msr_offset_efer, 1);
-	}
+	vmx->guest_msrs[efer_offset].data = guest_efer;
+	vmx->guest_msrs[efer_offset].mask = ~ignore_bits;
+	return true;
 }
 
 static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	int i;
 
 	if (vmx->host_state.loaded)
 		return;
@@ -650,13 +649,15 @@
 #endif
 
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu))
-		save_msrs(vmx->host_msrs +
-			  vmx->msr_offset_kernel_gs_base, 1);
-
+	if (is_long_mode(&vmx->vcpu)) {
+		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+	}
 #endif
-	load_msrs(vmx->guest_msrs, vmx->save_nmsrs);
-	load_transition_efer(vmx);
+	for (i = 0; i < vmx->save_nmsrs; ++i)
+		kvm_set_shared_msr(vmx->guest_msrs[i].index,
+				   vmx->guest_msrs[i].data,
+				   vmx->guest_msrs[i].mask);
 }
 
 static void __vmx_load_host_state(struct vcpu_vmx *vmx)
@@ -684,9 +685,12 @@
 		local_irq_restore(flags);
 	}
 	reload_tss();
-	save_msrs(vmx->guest_msrs, vmx->save_nmsrs);
-	load_msrs(vmx->host_msrs, vmx->save_nmsrs);
-	reload_host_efer(vmx);
+#ifdef CONFIG_X86_64
+	if (is_long_mode(&vmx->vcpu)) {
+		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+	}
+#endif
 }
 
 static void vmx_load_host_state(struct vcpu_vmx *vmx)
@@ -877,19 +881,14 @@
 /*
  * Swap MSR entry in host/guest MSR entry array.
  */
-#ifdef CONFIG_X86_64
 static void move_msr_up(struct vcpu_vmx *vmx, int from, int to)
 {
-	struct kvm_msr_entry tmp;
+	struct shared_msr_entry tmp;
 
 	tmp = vmx->guest_msrs[to];
 	vmx->guest_msrs[to] = vmx->guest_msrs[from];
 	vmx->guest_msrs[from] = tmp;
-	tmp = vmx->host_msrs[to];
-	vmx->host_msrs[to] = vmx->host_msrs[from];
-	vmx->host_msrs[from] = tmp;
 }
-#endif
 
 /*
  * Set up the vmcs to automatically save and restore system
@@ -898,15 +897,13 @@
  */
 static void setup_msrs(struct vcpu_vmx *vmx)
 {
-	int save_nmsrs;
+	int save_nmsrs, index;
 	unsigned long *msr_bitmap;
 
 	vmx_load_host_state(vmx);
 	save_nmsrs = 0;
 #ifdef CONFIG_X86_64
 	if (is_long_mode(&vmx->vcpu)) {
-		int index;
-
 		index = __find_msr_index(vmx, MSR_SYSCALL_MASK);
 		if (index >= 0)
 			move_msr_up(vmx, index, save_nmsrs++);
@@ -916,9 +913,6 @@
 		index = __find_msr_index(vmx, MSR_CSTAR);
 		if (index >= 0)
 			move_msr_up(vmx, index, save_nmsrs++);
-		index = __find_msr_index(vmx, MSR_KERNEL_GS_BASE);
-		if (index >= 0)
-			move_msr_up(vmx, index, save_nmsrs++);
 		/*
 		 * MSR_K6_STAR is only needed on long mode guests, and only
 		 * if efer.sce is enabled.
@@ -928,13 +922,11 @@
 			move_msr_up(vmx, index, save_nmsrs++);
 	}
 #endif
-	vmx->save_nmsrs = save_nmsrs;
+	index = __find_msr_index(vmx, MSR_EFER);
+	if (index >= 0 && update_transition_efer(vmx, index))
+		move_msr_up(vmx, index, save_nmsrs++);
 
-#ifdef CONFIG_X86_64
-	vmx->msr_offset_kernel_gs_base =
-		__find_msr_index(vmx, MSR_KERNEL_GS_BASE);
-#endif
-	vmx->msr_offset_efer = __find_msr_index(vmx, MSR_EFER);
+	vmx->save_nmsrs = save_nmsrs;
 
 	if (cpu_has_vmx_msr_bitmap()) {
 		if (is_long_mode(&vmx->vcpu))
@@ -976,7 +968,7 @@
 static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 {
 	u64 data;
-	struct kvm_msr_entry *msr;
+	struct shared_msr_entry *msr;
 
 	if (!pdata) {
 		printk(KERN_ERR "BUG: get_msr called with NULL pdata\n");
@@ -991,9 +983,13 @@
 	case MSR_GS_BASE:
 		data = vmcs_readl(GUEST_GS_BASE);
 		break;
+	case MSR_KERNEL_GS_BASE:
+		vmx_load_host_state(to_vmx(vcpu));
+		data = to_vmx(vcpu)->msr_guest_kernel_gs_base;
+		break;
+#endif
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_index, pdata);
-#endif
 	case MSR_IA32_TSC:
 		data = guest_read_tsc();
 		break;
@@ -1007,6 +1003,7 @@
 		data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
 	default:
+		vmx_load_host_state(to_vmx(vcpu));
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
 		if (msr) {
 			vmx_load_host_state(to_vmx(vcpu));
@@ -1028,7 +1025,7 @@
 static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_msr_entry *msr;
+	struct shared_msr_entry *msr;
 	u64 host_tsc;
 	int ret = 0;
 
@@ -1044,6 +1041,10 @@
 	case MSR_GS_BASE:
 		vmcs_writel(GUEST_GS_BASE, data);
 		break;
+	case MSR_KERNEL_GS_BASE:
+		vmx_load_host_state(vmx);
+		vmx->msr_guest_kernel_gs_base = data;
+		break;
 #endif
 	case MSR_IA32_SYSENTER_CS:
 		vmcs_write32(GUEST_SYSENTER_CS, data);
@@ -1097,30 +1098,14 @@
 	}
 }
 
-static int set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
+static void set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg)
 {
-	int old_debug = vcpu->guest_debug;
-	unsigned long flags;
-
-	vcpu->guest_debug = dbg->control;
-	if (!(vcpu->guest_debug & KVM_GUESTDBG_ENABLE))
-		vcpu->guest_debug = 0;
-
 	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)
 		vmcs_writel(GUEST_DR7, dbg->arch.debugreg[7]);
 	else
 		vmcs_writel(GUEST_DR7, vcpu->arch.dr7);
 
-	flags = vmcs_readl(GUEST_RFLAGS);
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		flags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
-	else if (old_debug & KVM_GUESTDBG_SINGLESTEP)
-		flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-	vmcs_writel(GUEST_RFLAGS, flags);
-
 	update_exception_bitmap(vcpu);
-
-	return 0;
 }
 
 static __init int cpu_has_kvm_support(void)
@@ -1139,12 +1124,15 @@
 	/* locked but not enabled */
 }
 
-static void hardware_enable(void *garbage)
+static int hardware_enable(void *garbage)
 {
 	int cpu = raw_smp_processor_id();
 	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
 	u64 old;
 
+	if (read_cr4() & X86_CR4_VMXE)
+		return -EBUSY;
+
 	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 	if ((old & (FEATURE_CONTROL_LOCKED |
@@ -1159,6 +1147,10 @@
 	asm volatile (ASM_VMX_VMXON_RAX
 		      : : "a"(&phys_addr), "m"(phys_addr)
 		      : "memory", "cc");
+
+	ept_sync_global();
+
+	return 0;
 }
 
 static void vmclear_local_vcpus(void)
@@ -1250,7 +1242,8 @@
 			SECONDARY_EXEC_WBINVD_EXITING |
 			SECONDARY_EXEC_ENABLE_VPID |
 			SECONDARY_EXEC_ENABLE_EPT |
-			SECONDARY_EXEC_UNRESTRICTED_GUEST;
+			SECONDARY_EXEC_UNRESTRICTED_GUEST |
+			SECONDARY_EXEC_PAUSE_LOOP_EXITING;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -1344,15 +1337,17 @@
 {
 	int cpu;
 
-	for_each_online_cpu(cpu)
+	for_each_possible_cpu(cpu) {
 		free_vmcs(per_cpu(vmxarea, cpu));
+		per_cpu(vmxarea, cpu) = NULL;
+	}
 }
 
 static __init int alloc_kvm_area(void)
 {
 	int cpu;
 
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		struct vmcs *vmcs;
 
 		vmcs = alloc_vmcs_cpu(cpu);
@@ -1394,6 +1389,9 @@
 	if (enable_ept && !cpu_has_vmx_ept_2m_page())
 		kvm_disable_largepages();
 
+	if (!cpu_has_vmx_ple())
+		ple_gap = 0;
+
 	return alloc_kvm_area();
 }
 
@@ -1536,8 +1534,16 @@
 static void vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct kvm_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
+	struct shared_msr_entry *msr = find_msr_entry(vmx, MSR_EFER);
 
+	if (!msr)
+		return;
+
+	/*
+	 * Force kernel_gs_base reloading before EFER changes, as control
+	 * of this msr depends on is_long_mode().
+	 */
+	vmx_load_host_state(to_vmx(vcpu));
 	vcpu->arch.shadow_efer = efer;
 	if (!msr)
 		return;
@@ -1727,6 +1733,7 @@
 		vmcs_write64(EPT_POINTER, eptp);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			vcpu->kvm->arch.ept_identity_map_addr;
+		ept_load_pdptrs(vcpu);
 	}
 
 	vmx_flush_tlb(vcpu);
@@ -2302,13 +2309,22 @@
 				~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
 		if (vmx->vpid == 0)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
-		if (!enable_ept)
+		if (!enable_ept) {
 			exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
+			enable_unrestricted_guest = 0;
+		}
 		if (!enable_unrestricted_guest)
 			exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
+		if (!ple_gap)
+			exec_control &= ~SECONDARY_EXEC_PAUSE_LOOP_EXITING;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
 	}
 
+	if (ple_gap) {
+		vmcs_write32(PLE_GAP, ple_gap);
+		vmcs_write32(PLE_WINDOW, ple_window);
+	}
+
 	vmcs_write32(PAGE_FAULT_ERROR_CODE_MASK, !!bypass_guest_pf);
 	vmcs_write32(PAGE_FAULT_ERROR_CODE_MATCH, !!bypass_guest_pf);
 	vmcs_write32(CR3_TARGET_COUNT, 0);           /* 22.2.1 */
@@ -2376,10 +2392,9 @@
 		if (wrmsr_safe(index, data_low, data_high) < 0)
 			continue;
 		data = data_low | ((u64)data_high << 32);
-		vmx->host_msrs[j].index = index;
-		vmx->host_msrs[j].reserved = 0;
-		vmx->host_msrs[j].data = data;
-		vmx->guest_msrs[j] = vmx->host_msrs[j];
+		vmx->guest_msrs[j].index = i;
+		vmx->guest_msrs[j].data = 0;
+		vmx->guest_msrs[j].mask = -1ull;
 		++vmx->nmsrs;
 	}
 
@@ -2510,7 +2525,7 @@
 	if (vmx->vpid != 0)
 		vmcs_write16(VIRTUAL_PROCESSOR_ID, vmx->vpid);
 
-	vmx->vcpu.arch.cr0 = 0x60000010;
+	vmx->vcpu.arch.cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
 	vmx_set_cr0(&vmx->vcpu, vmx->vcpu.arch.cr0); /* enter rmode */
 	vmx_set_cr4(&vmx->vcpu, 0);
 	vmx_set_efer(&vmx->vcpu, 0);
@@ -2627,6 +2642,34 @@
 				GUEST_INTR_STATE_NMI));
 }
 
+static bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu)
+{
+	if (!cpu_has_virtual_nmis())
+		return to_vmx(vcpu)->soft_vnmi_blocked;
+	else
+		return !!(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+			  GUEST_INTR_STATE_NMI);
+}
+
+static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	if (!cpu_has_virtual_nmis()) {
+		if (vmx->soft_vnmi_blocked != masked) {
+			vmx->soft_vnmi_blocked = masked;
+			vmx->vnmi_blocked_time = 0;
+		}
+	} else {
+		if (masked)
+			vmcs_set_bits(GUEST_INTERRUPTIBILITY_INFO,
+				      GUEST_INTR_STATE_NMI);
+		else
+			vmcs_clear_bits(GUEST_INTERRUPTIBILITY_INFO,
+					GUEST_INTR_STATE_NMI);
+	}
+}
+
 static int vmx_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
 	return (vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
@@ -2659,7 +2702,7 @@
 	 * Cause the #SS fault with 0 error code in VM86 mode.
 	 */
 	if (((vec == GP_VECTOR) || (vec == SS_VECTOR)) && err_code == 0)
-		if (emulate_instruction(vcpu, NULL, 0, 0, 0) == EMULATE_DONE)
+		if (emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DONE)
 			return 1;
 	/*
 	 * Forward all other exceptions that are valid in real mode.
@@ -2710,15 +2753,16 @@
 #endif
 }
 
-static int handle_machine_check(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_machine_check(struct kvm_vcpu *vcpu)
 {
 	/* already handled by vcpu_run */
 	return 1;
 }
 
-static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_exception(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	struct kvm_run *kvm_run = vcpu->run;
 	u32 intr_info, ex_no, error_code;
 	unsigned long cr2, rip, dr6;
 	u32 vect_info;
@@ -2728,12 +2772,17 @@
 	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
 	if (is_machine_check(intr_info))
-		return handle_machine_check(vcpu, kvm_run);
+		return handle_machine_check(vcpu);
 
 	if ((vect_info & VECTORING_INFO_VALID_MASK) &&
-						!is_page_fault(intr_info))
-		printk(KERN_ERR "%s: unexpected, vectoring info 0x%x "
-		       "intr info 0x%x\n", __func__, vect_info, intr_info);
+	    !is_page_fault(intr_info)) {
+		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_SIMUL_EX;
+		vcpu->run->internal.ndata = 2;
+		vcpu->run->internal.data[0] = vect_info;
+		vcpu->run->internal.data[1] = intr_info;
+		return 0;
+	}
 
 	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR)
 		return 1;  /* already handled by vmx_vcpu_run() */
@@ -2744,7 +2793,7 @@
 	}
 
 	if (is_invalid_opcode(intr_info)) {
-		er = emulate_instruction(vcpu, kvm_run, 0, 0, EMULTYPE_TRAP_UD);
+		er = emulate_instruction(vcpu, 0, 0, EMULTYPE_TRAP_UD);
 		if (er != EMULATE_DONE)
 			kvm_queue_exception(vcpu, UD_VECTOR);
 		return 1;
@@ -2803,20 +2852,19 @@
 	return 0;
 }
 
-static int handle_external_interrupt(struct kvm_vcpu *vcpu,
-				     struct kvm_run *kvm_run)
+static int handle_external_interrupt(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.irq_exits;
 	return 1;
 }
 
-static int handle_triple_fault(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_triple_fault(struct kvm_vcpu *vcpu)
 {
-	kvm_run->exit_reason = KVM_EXIT_SHUTDOWN;
+	vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
 	return 0;
 }
 
-static int handle_io(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_io(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	int size, in, string;
@@ -2827,8 +2875,7 @@
 	string = (exit_qualification & 16) != 0;
 
 	if (string) {
-		if (emulate_instruction(vcpu,
-					kvm_run, 0, 0, 0) == EMULATE_DO_MMIO)
+		if (emulate_instruction(vcpu, 0, 0, 0) == EMULATE_DO_MMIO)
 			return 0;
 		return 1;
 	}
@@ -2838,7 +2885,7 @@
 	port = exit_qualification >> 16;
 
 	skip_emulated_instruction(vcpu);
-	return kvm_emulate_pio(vcpu, kvm_run, in, size, port);
+	return kvm_emulate_pio(vcpu, in, size, port);
 }
 
 static void
@@ -2852,7 +2899,7 @@
 	hypercall[2] = 0xc1;
 }
 
-static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_cr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification, val;
 	int cr;
@@ -2887,7 +2934,7 @@
 					return 1;
 				if (cr8_prev <= cr8)
 					return 1;
-				kvm_run->exit_reason = KVM_EXIT_SET_TPR;
+				vcpu->run->exit_reason = KVM_EXIT_SET_TPR;
 				return 0;
 			}
 		};
@@ -2922,13 +2969,13 @@
 	default:
 		break;
 	}
-	kvm_run->exit_reason = 0;
+	vcpu->run->exit_reason = 0;
 	pr_unimpl(vcpu, "unhandled control register: op %d cr %d\n",
 	       (int)(exit_qualification >> 4) & 3, cr);
 	return 0;
 }
 
-static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_dr(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	unsigned long val;
@@ -2944,13 +2991,13 @@
 		 * guest debugging itself.
 		 */
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
-			kvm_run->debug.arch.dr6 = vcpu->arch.dr6;
-			kvm_run->debug.arch.dr7 = dr;
-			kvm_run->debug.arch.pc =
+			vcpu->run->debug.arch.dr6 = vcpu->arch.dr6;
+			vcpu->run->debug.arch.dr7 = dr;
+			vcpu->run->debug.arch.pc =
 				vmcs_readl(GUEST_CS_BASE) +
 				vmcs_readl(GUEST_RIP);
-			kvm_run->debug.arch.exception = DB_VECTOR;
-			kvm_run->exit_reason = KVM_EXIT_DEBUG;
+			vcpu->run->debug.arch.exception = DB_VECTOR;
+			vcpu->run->exit_reason = KVM_EXIT_DEBUG;
 			return 0;
 		} else {
 			vcpu->arch.dr7 &= ~DR7_GD;
@@ -3016,13 +3063,13 @@
 	return 1;
 }
 
-static int handle_cpuid(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_cpuid(struct kvm_vcpu *vcpu)
 {
 	kvm_emulate_cpuid(vcpu);
 	return 1;
 }
 
-static int handle_rdmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_rdmsr(struct kvm_vcpu *vcpu)
 {
 	u32 ecx = vcpu->arch.regs[VCPU_REGS_RCX];
 	u64 data;
@@ -3041,7 +3088,7 @@
 	return 1;
 }
 
-static int handle_wrmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_wrmsr(struct kvm_vcpu *vcpu)
 {
 	u32 ecx = vcpu->arch.regs[VCPU_REGS_RCX];
 	u64 data = (vcpu->arch.regs[VCPU_REGS_RAX] & -1u)
@@ -3058,14 +3105,12 @@
 	return 1;
 }
 
-static int handle_tpr_below_threshold(struct kvm_vcpu *vcpu,
-				      struct kvm_run *kvm_run)
+static int handle_tpr_below_threshold(struct kvm_vcpu *vcpu)
 {
 	return 1;
 }
 
-static int handle_interrupt_window(struct kvm_vcpu *vcpu,
-				   struct kvm_run *kvm_run)
+static int handle_interrupt_window(struct kvm_vcpu *vcpu)
 {
 	u32 cpu_based_vm_exec_control;
 
@@ -3081,34 +3126,34 @@
 	 * possible
 	 */
 	if (!irqchip_in_kernel(vcpu->kvm) &&
-	    kvm_run->request_interrupt_window &&
+	    vcpu->run->request_interrupt_window &&
 	    !kvm_cpu_has_interrupt(vcpu)) {
-		kvm_run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
+		vcpu->run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
 		return 0;
 	}
 	return 1;
 }
 
-static int handle_halt(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_halt(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
 	return kvm_emulate_halt(vcpu);
 }
 
-static int handle_vmcall(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_vmcall(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
 	kvm_emulate_hypercall(vcpu);
 	return 1;
 }
 
-static int handle_vmx_insn(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_vmx_insn(struct kvm_vcpu *vcpu)
 {
 	kvm_queue_exception(vcpu, UD_VECTOR);
 	return 1;
 }
 
-static int handle_invlpg(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_invlpg(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 
@@ -3117,14 +3162,14 @@
 	return 1;
 }
 
-static int handle_wbinvd(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_wbinvd(struct kvm_vcpu *vcpu)
 {
 	skip_emulated_instruction(vcpu);
 	/* TODO: Add support for VT-d/pass-through device */
 	return 1;
 }
 
-static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_apic_access(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	enum emulation_result er;
@@ -3133,7 +3178,7 @@
 	exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	offset = exit_qualification & 0xffful;
 
-	er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+	er = emulate_instruction(vcpu, 0, 0, 0);
 
 	if (er !=  EMULATE_DONE) {
 		printk(KERN_ERR
@@ -3144,7 +3189,7 @@
 	return 1;
 }
 
-static int handle_task_switch(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_task_switch(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long exit_qualification;
@@ -3198,7 +3243,7 @@
 	return 1;
 }
 
-static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_ept_violation(struct kvm_vcpu *vcpu)
 {
 	unsigned long exit_qualification;
 	gpa_t gpa;
@@ -3219,8 +3264,8 @@
 			vmcs_readl(GUEST_LINEAR_ADDRESS));
 		printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
 			(long unsigned int)exit_qualification);
-		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-		kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
+		vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
+		vcpu->run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
 		return 0;
 	}
 
@@ -3290,7 +3335,7 @@
 	}
 }
 
-static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 {
 	u64 sptes[4];
 	int nr_sptes, i;
@@ -3306,13 +3351,13 @@
 	for (i = PT64_ROOT_LEVEL; i > PT64_ROOT_LEVEL - nr_sptes; --i)
 		ept_misconfig_inspect_spte(vcpu, sptes[i-1], i);
 
-	kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-	kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+	vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
+	vcpu->run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
 
 	return 0;
 }
 
-static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int handle_nmi_window(struct kvm_vcpu *vcpu)
 {
 	u32 cpu_based_vm_exec_control;
 
@@ -3325,36 +3370,50 @@
 	return 1;
 }
 
-static void handle_invalid_guest_state(struct kvm_vcpu *vcpu,
-				struct kvm_run *kvm_run)
+static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	enum emulation_result err = EMULATE_DONE;
-
-	local_irq_enable();
-	preempt_enable();
+	int ret = 1;
 
 	while (!guest_state_valid(vcpu)) {
-		err = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
+		err = emulate_instruction(vcpu, 0, 0, 0);
 
-		if (err == EMULATE_DO_MMIO)
-			break;
+		if (err == EMULATE_DO_MMIO) {
+			ret = 0;
+			goto out;
+		}
 
 		if (err != EMULATE_DONE) {
 			kvm_report_emulation_failure(vcpu, "emulation failure");
-			break;
+			vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+			vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+			vcpu->run->internal.ndata = 0;
+			ret = 0;
+			goto out;
 		}
 
 		if (signal_pending(current))
-			break;
+			goto out;
 		if (need_resched())
 			schedule();
 	}
 
-	preempt_disable();
-	local_irq_disable();
+	vmx->emulation_required = 0;
+out:
+	return ret;
+}
 
-	vmx->invalid_state_emulation_result = err;
+/*
+ * Indicate a busy-waiting vcpu in spinlock. We do not enable the PAUSE
+ * exiting, so only get here on cpu with PAUSE-Loop-Exiting.
+ */
+static int handle_pause(struct kvm_vcpu *vcpu)
+{
+	skip_emulated_instruction(vcpu);
+	kvm_vcpu_on_spin(vcpu);
+
+	return 1;
 }
 
 /*
@@ -3362,8 +3421,7 @@
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
  * to be done to userspace and return 0.
  */
-static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
-				      struct kvm_run *kvm_run) = {
+static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = {
 	[EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
 	[EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
 	[EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
@@ -3394,6 +3452,7 @@
 	[EXIT_REASON_MCE_DURING_VMENTRY]      = handle_machine_check,
 	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
 	[EXIT_REASON_EPT_MISCONFIG]           = handle_ept_misconfig,
+	[EXIT_REASON_PAUSE_INSTRUCTION]       = handle_pause,
 };
 
 static const int kvm_vmx_max_exit_handlers =
@@ -3403,7 +3462,7 @@
  * The guest has exited.  See if we can fix it or if we need userspace
  * assistance.
  */
-static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 exit_reason = vmx->exit_reason;
@@ -3411,13 +3470,9 @@
 
 	trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
 
-	/* If we need to emulate an MMIO from handle_invalid_guest_state
-	 * we just return 0 */
-	if (vmx->emulation_required && emulate_invalid_guest_state) {
-		if (guest_state_valid(vcpu))
-			vmx->emulation_required = 0;
-		return vmx->invalid_state_emulation_result != EMULATE_DO_MMIO;
-	}
+	/* If guest state is invalid, start emulating */
+	if (vmx->emulation_required && emulate_invalid_guest_state)
+		return handle_invalid_guest_state(vcpu);
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
@@ -3425,8 +3480,8 @@
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
 
 	if (unlikely(vmx->fail)) {
-		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
-		kvm_run->fail_entry.hardware_entry_failure_reason
+		vcpu->run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+		vcpu->run->fail_entry.hardware_entry_failure_reason
 			= vmcs_read32(VM_INSTRUCTION_ERROR);
 		return 0;
 	}
@@ -3459,10 +3514,10 @@
 
 	if (exit_reason < kvm_vmx_max_exit_handlers
 	    && kvm_vmx_exit_handlers[exit_reason])
-		return kvm_vmx_exit_handlers[exit_reason](vcpu, kvm_run);
+		return kvm_vmx_exit_handlers[exit_reason](vcpu);
 	else {
-		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-		kvm_run->hw.hardware_exit_reason = exit_reason;
+		vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
+		vcpu->run->hw.hardware_exit_reason = exit_reason;
 	}
 	return 0;
 }
@@ -3600,23 +3655,18 @@
 #define Q "l"
 #endif
 
-static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
-	if (enable_ept && is_paging(vcpu)) {
-		vmcs_writel(GUEST_CR3, vcpu->arch.cr3);
-		ept_load_pdptrs(vcpu);
-	}
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
 		vmx->entry_time = ktime_get();
 
-	/* Handle invalid guest state instead of entering VMX */
-	if (vmx->emulation_required && emulate_invalid_guest_state) {
-		handle_invalid_guest_state(vcpu, kvm_run);
+	/* Don't enter VMX if guest state is invalid, let the exit handler
+	   start emulation until we arrive back to a valid state */
+	if (vmx->emulation_required && emulate_invalid_guest_state)
 		return;
-	}
 
 	if (test_bit(VCPU_REGS_RSP, (unsigned long *)&vcpu->arch.regs_dirty))
 		vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
@@ -3775,7 +3825,6 @@
 		__clear_bit(vmx->vpid, vmx_vpid_bitmap);
 	spin_unlock(&vmx_vpid_lock);
 	vmx_free_vmcs(vcpu);
-	kfree(vmx->host_msrs);
 	kfree(vmx->guest_msrs);
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vmx);
@@ -3802,10 +3851,6 @@
 		goto uninit_vcpu;
 	}
 
-	vmx->host_msrs = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!vmx->host_msrs)
-		goto free_guest_msrs;
-
 	vmx->vmcs = alloc_vmcs();
 	if (!vmx->vmcs)
 		goto free_msrs;
@@ -3836,8 +3881,6 @@
 free_vmcs:
 	free_vmcs(vmx->vmcs);
 free_msrs:
-	kfree(vmx->host_msrs);
-free_guest_msrs:
 	kfree(vmx->guest_msrs);
 uninit_vcpu:
 	kvm_vcpu_uninit(&vmx->vcpu);
@@ -3973,6 +4016,8 @@
 	.queue_exception = vmx_queue_exception,
 	.interrupt_allowed = vmx_interrupt_allowed,
 	.nmi_allowed = vmx_nmi_allowed,
+	.get_nmi_mask = vmx_get_nmi_mask,
+	.set_nmi_mask = vmx_set_nmi_mask,
 	.enable_nmi_window = enable_nmi_window,
 	.enable_irq_window = enable_irq_window,
 	.update_cr8_intercept = update_cr8_intercept,
@@ -3987,7 +4032,12 @@
 
 static int __init vmx_init(void)
 {
-	int r;
+	int r, i;
+
+	rdmsrl_safe(MSR_EFER, &host_efer);
+
+	for (i = 0; i < NR_VMX_MSR; ++i)
+		kvm_define_shared_msr(i, vmx_msr_index[i]);
 
 	vmx_io_bitmap_a = (unsigned long *)__get_free_page(GFP_KERNEL);
 	if (!vmx_io_bitmap_a)
@@ -4049,8 +4099,6 @@
 	if (bypass_guest_pf)
 		kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
 
-	ept_sync_global();
-
 	return 0;
 
 out3:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index ae07d26..9d06896 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,11 +37,13 @@
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
+#include <linux/user-return-notifier.h>
 #include <trace/events/kvm.h>
 #undef TRACE_INCLUDE_FILE
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
+#include <asm/debugreg.h>
 #include <asm/uaccess.h>
 #include <asm/msr.h>
 #include <asm/desc.h>
@@ -87,6 +89,25 @@
 int ignore_msrs = 0;
 module_param_named(ignore_msrs, ignore_msrs, bool, S_IRUGO | S_IWUSR);
 
+#define KVM_NR_SHARED_MSRS 16
+
+struct kvm_shared_msrs_global {
+	int nr;
+	struct kvm_shared_msr {
+		u32 msr;
+		u64 value;
+	} msrs[KVM_NR_SHARED_MSRS];
+};
+
+struct kvm_shared_msrs {
+	struct user_return_notifier urn;
+	bool registered;
+	u64 current_value[KVM_NR_SHARED_MSRS];
+};
+
+static struct kvm_shared_msrs_global __read_mostly shared_msrs_global;
+static DEFINE_PER_CPU(struct kvm_shared_msrs, shared_msrs);
+
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "pf_fixed", VCPU_STAT(pf_fixed) },
 	{ "pf_guest", VCPU_STAT(pf_guest) },
@@ -123,6 +144,72 @@
 	{ NULL }
 };
 
+static void kvm_on_user_return(struct user_return_notifier *urn)
+{
+	unsigned slot;
+	struct kvm_shared_msr *global;
+	struct kvm_shared_msrs *locals
+		= container_of(urn, struct kvm_shared_msrs, urn);
+
+	for (slot = 0; slot < shared_msrs_global.nr; ++slot) {
+		global = &shared_msrs_global.msrs[slot];
+		if (global->value != locals->current_value[slot]) {
+			wrmsrl(global->msr, global->value);
+			locals->current_value[slot] = global->value;
+		}
+	}
+	locals->registered = false;
+	user_return_notifier_unregister(urn);
+}
+
+void kvm_define_shared_msr(unsigned slot, u32 msr)
+{
+	int cpu;
+	u64 value;
+
+	if (slot >= shared_msrs_global.nr)
+		shared_msrs_global.nr = slot + 1;
+	shared_msrs_global.msrs[slot].msr = msr;
+	rdmsrl_safe(msr, &value);
+	shared_msrs_global.msrs[slot].value = value;
+	for_each_online_cpu(cpu)
+		per_cpu(shared_msrs, cpu).current_value[slot] = value;
+}
+EXPORT_SYMBOL_GPL(kvm_define_shared_msr);
+
+static void kvm_shared_msr_cpu_online(void)
+{
+	unsigned i;
+	struct kvm_shared_msrs *locals = &__get_cpu_var(shared_msrs);
+
+	for (i = 0; i < shared_msrs_global.nr; ++i)
+		locals->current_value[i] = shared_msrs_global.msrs[i].value;
+}
+
+void kvm_set_shared_msr(unsigned slot, u64 value, u64 mask)
+{
+	struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs);
+
+	if (((value ^ smsr->current_value[slot]) & mask) == 0)
+		return;
+	smsr->current_value[slot] = value;
+	wrmsrl(shared_msrs_global.msrs[slot].msr, value);
+	if (!smsr->registered) {
+		smsr->urn.on_user_return = kvm_on_user_return;
+		user_return_notifier_register(&smsr->urn);
+		smsr->registered = true;
+	}
+}
+EXPORT_SYMBOL_GPL(kvm_set_shared_msr);
+
+static void drop_user_return_notifiers(void *ignore)
+{
+	struct kvm_shared_msrs *smsr = &__get_cpu_var(shared_msrs);
+
+	if (smsr->registered)
+		kvm_on_user_return(&smsr->urn);
+}
+
 unsigned long segment_base(u16 selector)
 {
 	struct descriptor_table gdt;
@@ -484,16 +571,19 @@
  * and KVM_SET_MSRS, and KVM_GET_MSR_INDEX_LIST.
  *
  * This list is modified at module load time to reflect the
- * capabilities of the host cpu.
+ * capabilities of the host cpu. This capabilities test skips MSRs that are
+ * kvm-specific. Those are put in the beginning of the list.
  */
+
+#define KVM_SAVE_MSRS_BEGIN	2
 static u32 msrs_to_save[] = {
+	MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
 	MSR_K6_STAR,
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
-	MSR_IA32_TSC, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
-	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
+	MSR_IA32_TSC, MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
 };
 
 static unsigned num_msrs_to_save;
@@ -677,7 +767,8 @@
 	/* With all the info we got, fill in the values */
 
 	vcpu->hv_clock.system_time = ts.tv_nsec +
-				     (NSEC_PER_SEC * (u64)ts.tv_sec);
+				     (NSEC_PER_SEC * (u64)ts.tv_sec) + v->kvm->arch.kvmclock_offset;
+
 	/*
 	 * The interface expects us to write an even number signaling that the
 	 * update is finished. Since the guest won't see the intermediate
@@ -835,6 +926,38 @@
 	return 0;
 }
 
+static int xen_hvm_config(struct kvm_vcpu *vcpu, u64 data)
+{
+	struct kvm *kvm = vcpu->kvm;
+	int lm = is_long_mode(vcpu);
+	u8 *blob_addr = lm ? (u8 *)(long)kvm->arch.xen_hvm_config.blob_addr_64
+		: (u8 *)(long)kvm->arch.xen_hvm_config.blob_addr_32;
+	u8 blob_size = lm ? kvm->arch.xen_hvm_config.blob_size_64
+		: kvm->arch.xen_hvm_config.blob_size_32;
+	u32 page_num = data & ~PAGE_MASK;
+	u64 page_addr = data & PAGE_MASK;
+	u8 *page;
+	int r;
+
+	r = -E2BIG;
+	if (page_num >= blob_size)
+		goto out;
+	r = -ENOMEM;
+	page = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!page)
+		goto out;
+	r = -EFAULT;
+	if (copy_from_user(page, blob_addr + (page_num * PAGE_SIZE), PAGE_SIZE))
+		goto out_free;
+	if (kvm_write_guest(kvm, page_addr, page, PAGE_SIZE))
+		goto out_free;
+	r = 0;
+out_free:
+	kfree(page);
+out:
+	return r;
+}
+
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
 	switch (msr) {
@@ -950,6 +1073,8 @@
 			"0x%x data 0x%llx\n", msr, data);
 		break;
 	default:
+		if (msr && (msr == vcpu->kvm->arch.xen_hvm_config.msr))
+			return xen_hvm_config(vcpu, data);
 		if (!ignore_msrs) {
 			pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n",
 				msr, data);
@@ -1224,6 +1349,9 @@
 	case KVM_CAP_PIT2:
 	case KVM_CAP_PIT_STATE2:
 	case KVM_CAP_SET_IDENTITY_MAP_ADDR:
+	case KVM_CAP_XEN_HVM:
+	case KVM_CAP_ADJUST_CLOCK:
+	case KVM_CAP_VCPU_EVENTS:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1238,8 +1366,8 @@
 	case KVM_CAP_NR_MEMSLOTS:
 		r = KVM_MEMORY_SLOTS;
 		break;
-	case KVM_CAP_PV_MMU:
-		r = !tdp_enabled;
+	case KVM_CAP_PV_MMU:	/* obsolete */
+		r = 0;
 		break;
 	case KVM_CAP_IOMMU:
 		r = iommu_found();
@@ -1326,6 +1454,12 @@
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	kvm_x86_ops->vcpu_load(vcpu, cpu);
+	if (unlikely(per_cpu(cpu_tsc_khz, cpu) == 0)) {
+		unsigned long khz = cpufreq_quick_get(cpu);
+		if (!khz)
+			khz = tsc_khz;
+		per_cpu(cpu_tsc_khz, cpu) = khz;
+	}
 	kvm_request_guest_time_update(vcpu);
 }
 
@@ -1759,6 +1893,61 @@
 	return 0;
 }
 
+static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu,
+					       struct kvm_vcpu_events *events)
+{
+	vcpu_load(vcpu);
+
+	events->exception.injected = vcpu->arch.exception.pending;
+	events->exception.nr = vcpu->arch.exception.nr;
+	events->exception.has_error_code = vcpu->arch.exception.has_error_code;
+	events->exception.error_code = vcpu->arch.exception.error_code;
+
+	events->interrupt.injected = vcpu->arch.interrupt.pending;
+	events->interrupt.nr = vcpu->arch.interrupt.nr;
+	events->interrupt.soft = vcpu->arch.interrupt.soft;
+
+	events->nmi.injected = vcpu->arch.nmi_injected;
+	events->nmi.pending = vcpu->arch.nmi_pending;
+	events->nmi.masked = kvm_x86_ops->get_nmi_mask(vcpu);
+
+	events->sipi_vector = vcpu->arch.sipi_vector;
+
+	events->flags = 0;
+
+	vcpu_put(vcpu);
+}
+
+static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
+					      struct kvm_vcpu_events *events)
+{
+	if (events->flags)
+		return -EINVAL;
+
+	vcpu_load(vcpu);
+
+	vcpu->arch.exception.pending = events->exception.injected;
+	vcpu->arch.exception.nr = events->exception.nr;
+	vcpu->arch.exception.has_error_code = events->exception.has_error_code;
+	vcpu->arch.exception.error_code = events->exception.error_code;
+
+	vcpu->arch.interrupt.pending = events->interrupt.injected;
+	vcpu->arch.interrupt.nr = events->interrupt.nr;
+	vcpu->arch.interrupt.soft = events->interrupt.soft;
+	if (vcpu->arch.interrupt.pending && irqchip_in_kernel(vcpu->kvm))
+		kvm_pic_clear_isr_ack(vcpu->kvm);
+
+	vcpu->arch.nmi_injected = events->nmi.injected;
+	vcpu->arch.nmi_pending = events->nmi.pending;
+	kvm_x86_ops->set_nmi_mask(vcpu, events->nmi.masked);
+
+	vcpu->arch.sipi_vector = events->sipi_vector;
+
+	vcpu_put(vcpu);
+
+	return 0;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -1769,6 +1958,9 @@
 
 	switch (ioctl) {
 	case KVM_GET_LAPIC: {
+		r = -EINVAL;
+		if (!vcpu->arch.apic)
+			goto out;
 		lapic = kzalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 
 		r = -ENOMEM;
@@ -1784,6 +1976,9 @@
 		break;
 	}
 	case KVM_SET_LAPIC: {
+		r = -EINVAL;
+		if (!vcpu->arch.apic)
+			goto out;
 		lapic = kmalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 		r = -ENOMEM;
 		if (!lapic)
@@ -1910,6 +2105,27 @@
 		r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
 		break;
 	}
+	case KVM_GET_VCPU_EVENTS: {
+		struct kvm_vcpu_events events;
+
+		kvm_vcpu_ioctl_x86_get_vcpu_events(vcpu, &events);
+
+		r = -EFAULT;
+		if (copy_to_user(argp, &events, sizeof(struct kvm_vcpu_events)))
+			break;
+		r = 0;
+		break;
+	}
+	case KVM_SET_VCPU_EVENTS: {
+		struct kvm_vcpu_events events;
+
+		r = -EFAULT;
+		if (copy_from_user(&events, argp, sizeof(struct kvm_vcpu_events)))
+			break;
+
+		r = kvm_vcpu_ioctl_x86_set_vcpu_events(vcpu, &events);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -2038,9 +2254,7 @@
 			sizeof(struct kvm_pic_state));
 		break;
 	case KVM_IRQCHIP_IOAPIC:
-		memcpy(&chip->chip.ioapic,
-			ioapic_irqchip(kvm),
-			sizeof(struct kvm_ioapic_state));
+		r = kvm_get_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -2070,11 +2284,7 @@
 		spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_IOAPIC:
-		mutex_lock(&kvm->irq_lock);
-		memcpy(ioapic_irqchip(kvm),
-			&chip->chip.ioapic,
-			sizeof(struct kvm_ioapic_state));
-		mutex_unlock(&kvm->irq_lock);
+		r = kvm_set_ioapic(kvm, &chip->chip.ioapic);
 		break;
 	default:
 		r = -EINVAL;
@@ -2182,7 +2392,7 @@
 {
 	struct kvm *kvm = filp->private_data;
 	void __user *argp = (void __user *)arg;
-	int r = -EINVAL;
+	int r = -ENOTTY;
 	/*
 	 * This union makes it completely explicit to gcc-3.x
 	 * that these two variables' stack usage should be
@@ -2244,25 +2454,39 @@
 		if (r)
 			goto out;
 		break;
-	case KVM_CREATE_IRQCHIP:
+	case KVM_CREATE_IRQCHIP: {
+		struct kvm_pic *vpic;
+
+		mutex_lock(&kvm->lock);
+		r = -EEXIST;
+		if (kvm->arch.vpic)
+			goto create_irqchip_unlock;
 		r = -ENOMEM;
-		kvm->arch.vpic = kvm_create_pic(kvm);
-		if (kvm->arch.vpic) {
+		vpic = kvm_create_pic(kvm);
+		if (vpic) {
 			r = kvm_ioapic_init(kvm);
 			if (r) {
-				kfree(kvm->arch.vpic);
-				kvm->arch.vpic = NULL;
-				goto out;
+				kfree(vpic);
+				goto create_irqchip_unlock;
 			}
 		} else
-			goto out;
+			goto create_irqchip_unlock;
+		smp_wmb();
+		kvm->arch.vpic = vpic;
+		smp_wmb();
 		r = kvm_setup_default_irq_routing(kvm);
 		if (r) {
+			mutex_lock(&kvm->irq_lock);
 			kfree(kvm->arch.vpic);
 			kfree(kvm->arch.vioapic);
-			goto out;
+			kvm->arch.vpic = NULL;
+			kvm->arch.vioapic = NULL;
+			mutex_unlock(&kvm->irq_lock);
 		}
+	create_irqchip_unlock:
+		mutex_unlock(&kvm->lock);
 		break;
+	}
 	case KVM_CREATE_PIT:
 		u.pit_config.flags = KVM_PIT_SPEAKER_DUMMY;
 		goto create_pit;
@@ -2292,10 +2516,8 @@
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 					irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
@@ -2421,6 +2643,55 @@
 		r = 0;
 		break;
 	}
+	case KVM_XEN_HVM_CONFIG: {
+		r = -EFAULT;
+		if (copy_from_user(&kvm->arch.xen_hvm_config, argp,
+				   sizeof(struct kvm_xen_hvm_config)))
+			goto out;
+		r = -EINVAL;
+		if (kvm->arch.xen_hvm_config.flags)
+			goto out;
+		r = 0;
+		break;
+	}
+	case KVM_SET_CLOCK: {
+		struct timespec now;
+		struct kvm_clock_data user_ns;
+		u64 now_ns;
+		s64 delta;
+
+		r = -EFAULT;
+		if (copy_from_user(&user_ns, argp, sizeof(user_ns)))
+			goto out;
+
+		r = -EINVAL;
+		if (user_ns.flags)
+			goto out;
+
+		r = 0;
+		ktime_get_ts(&now);
+		now_ns = timespec_to_ns(&now);
+		delta = user_ns.clock - now_ns;
+		kvm->arch.kvmclock_offset = delta;
+		break;
+	}
+	case KVM_GET_CLOCK: {
+		struct timespec now;
+		struct kvm_clock_data user_ns;
+		u64 now_ns;
+
+		ktime_get_ts(&now);
+		now_ns = timespec_to_ns(&now);
+		user_ns.clock = kvm->arch.kvmclock_offset + now_ns;
+		user_ns.flags = 0;
+
+		r = -EFAULT;
+		if (copy_to_user(argp, &user_ns, sizeof(user_ns)))
+			goto out;
+		r = 0;
+		break;
+	}
+
 	default:
 		;
 	}
@@ -2433,7 +2704,8 @@
 	u32 dummy[2];
 	unsigned i, j;
 
-	for (i = j = 0; i < ARRAY_SIZE(msrs_to_save); i++) {
+	/* skip the first msrs in the list. KVM-specific */
+	for (i = j = KVM_SAVE_MSRS_BEGIN; i < ARRAY_SIZE(msrs_to_save); i++) {
 		if (rdmsr_safe(msrs_to_save[i], &dummy[0], &dummy[1]) < 0)
 			continue;
 		if (j < i)
@@ -2757,13 +3029,13 @@
 }
 
 int emulate_instruction(struct kvm_vcpu *vcpu,
-			struct kvm_run *run,
 			unsigned long cr2,
 			u16 error_code,
 			int emulation_type)
 {
 	int r, shadow_mask;
 	struct decode_cache *c;
+	struct kvm_run *run = vcpu->run;
 
 	kvm_clear_exception_queue(vcpu);
 	vcpu->arch.mmio_fault_cr2 = cr2;
@@ -2783,7 +3055,7 @@
 		kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 
 		vcpu->arch.emulate_ctxt.vcpu = vcpu;
-		vcpu->arch.emulate_ctxt.eflags = kvm_x86_ops->get_rflags(vcpu);
+		vcpu->arch.emulate_ctxt.eflags = kvm_get_rflags(vcpu);
 		vcpu->arch.emulate_ctxt.mode =
 			(vcpu->arch.emulate_ctxt.eflags & X86_EFLAGS_VM)
 			? X86EMUL_MODE_REAL : cs_l
@@ -2861,7 +3133,7 @@
 		return EMULATE_DO_MMIO;
 	}
 
-	kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
+	kvm_set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
 
 	if (vcpu->mmio_is_write) {
 		vcpu->mmio_needed = 0;
@@ -2969,8 +3241,7 @@
 	return r;
 }
 
-int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
-		  int size, unsigned port)
+int kvm_emulate_pio(struct kvm_vcpu *vcpu, int in, int size, unsigned port)
 {
 	unsigned long val;
 
@@ -2999,7 +3270,7 @@
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_pio);
 
-int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
+int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, int in,
 		  int size, unsigned long count, int down,
 		  gva_t address, int rep, unsigned port)
 {
@@ -3072,9 +3343,6 @@
 	/* nothing */
 }
 
-static unsigned int  ref_freq;
-static unsigned long tsc_khz_ref;
-
 static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 				     void *data)
 {
@@ -3083,14 +3351,11 @@
 	struct kvm_vcpu *vcpu;
 	int i, send_ipi = 0;
 
-	if (!ref_freq)
-		ref_freq = freq->old;
-
 	if (val == CPUFREQ_PRECHANGE && freq->old > freq->new)
 		return 0;
 	if (val == CPUFREQ_POSTCHANGE && freq->old < freq->new)
 		return 0;
-	per_cpu(cpu_tsc_khz, freq->cpu) = cpufreq_scale(tsc_khz_ref, ref_freq, freq->new);
+	per_cpu(cpu_tsc_khz, freq->cpu) = freq->new;
 
 	spin_lock(&kvm_lock);
 	list_for_each_entry(kvm, &vm_list, vm_list) {
@@ -3127,9 +3392,28 @@
         .notifier_call  = kvmclock_cpufreq_notifier
 };
 
+static void kvm_timer_init(void)
+{
+	int cpu;
+
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
+		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
+					  CPUFREQ_TRANSITION_NOTIFIER);
+		for_each_online_cpu(cpu) {
+			unsigned long khz = cpufreq_get(cpu);
+			if (!khz)
+				khz = tsc_khz;
+			per_cpu(cpu_tsc_khz, cpu) = khz;
+		}
+	} else {
+		for_each_possible_cpu(cpu)
+			per_cpu(cpu_tsc_khz, cpu) = tsc_khz;
+	}
+}
+
 int kvm_arch_init(void *opaque)
 {
-	int r, cpu;
+	int r;
 	struct kvm_x86_ops *ops = (struct kvm_x86_ops *)opaque;
 
 	if (kvm_x86_ops) {
@@ -3161,13 +3445,7 @@
 	kvm_mmu_set_mask_ptes(PT_USER_MASK, PT_ACCESSED_MASK,
 			PT_DIRTY_MASK, PT64_NX_MASK, 0);
 
-	for_each_possible_cpu(cpu)
-		per_cpu(cpu_tsc_khz, cpu) = tsc_khz;
-	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
-		tsc_khz_ref = tsc_khz;
-		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
-					  CPUFREQ_TRANSITION_NOTIFIER);
-	}
+	kvm_timer_init();
 
 	return 0;
 
@@ -3295,7 +3573,7 @@
 		   unsigned long *rflags)
 {
 	kvm_lmsw(vcpu, msw);
-	*rflags = kvm_x86_ops->get_rflags(vcpu);
+	*rflags = kvm_get_rflags(vcpu);
 }
 
 unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
@@ -3333,7 +3611,7 @@
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
-		*rflags = kvm_x86_ops->get_rflags(vcpu);
+		*rflags = kvm_get_rflags(vcpu);
 		break;
 	case 2:
 		vcpu->arch.cr2 = val;
@@ -3453,18 +3731,18 @@
  *
  * No need to exit to userspace if we already have an interrupt queued.
  */
-static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu,
-					  struct kvm_run *kvm_run)
+static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu)
 {
 	return (!irqchip_in_kernel(vcpu->kvm) && !kvm_cpu_has_interrupt(vcpu) &&
-		kvm_run->request_interrupt_window &&
+		vcpu->run->request_interrupt_window &&
 		kvm_arch_interrupt_allowed(vcpu));
 }
 
-static void post_kvm_run_save(struct kvm_vcpu *vcpu,
-			      struct kvm_run *kvm_run)
+static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 {
-	kvm_run->if_flag = (kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_IF) != 0;
+	struct kvm_run *kvm_run = vcpu->run;
+
+	kvm_run->if_flag = (kvm_get_rflags(vcpu) & X86_EFLAGS_IF) != 0;
 	kvm_run->cr8 = kvm_get_cr8(vcpu);
 	kvm_run->apic_base = kvm_get_apic_base(vcpu);
 	if (irqchip_in_kernel(vcpu->kvm))
@@ -3525,7 +3803,7 @@
 	kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
 }
 
-static void inject_pending_event(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void inject_pending_event(struct kvm_vcpu *vcpu)
 {
 	/* try to reinject previous events if any */
 	if (vcpu->arch.exception.pending) {
@@ -3561,11 +3839,11 @@
 	}
 }
 
-static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 {
 	int r;
 	bool req_int_win = !irqchip_in_kernel(vcpu->kvm) &&
-		kvm_run->request_interrupt_window;
+		vcpu->run->request_interrupt_window;
 
 	if (vcpu->requests)
 		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
@@ -3586,12 +3864,12 @@
 			kvm_x86_ops->tlb_flush(vcpu);
 		if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
 				       &vcpu->requests)) {
-			kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
+			vcpu->run->exit_reason = KVM_EXIT_TPR_ACCESS;
 			r = 0;
 			goto out;
 		}
 		if (test_and_clear_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests)) {
-			kvm_run->exit_reason = KVM_EXIT_SHUTDOWN;
+			vcpu->run->exit_reason = KVM_EXIT_SHUTDOWN;
 			r = 0;
 			goto out;
 		}
@@ -3615,7 +3893,7 @@
 		goto out;
 	}
 
-	inject_pending_event(vcpu, kvm_run);
+	inject_pending_event(vcpu);
 
 	/* enable NMI/IRQ window open exits if needed */
 	if (vcpu->arch.nmi_pending)
@@ -3641,16 +3919,17 @@
 	}
 
 	trace_kvm_entry(vcpu->vcpu_id);
-	kvm_x86_ops->run(vcpu, kvm_run);
+	kvm_x86_ops->run(vcpu);
 
-	if (unlikely(vcpu->arch.switch_db_regs || test_thread_flag(TIF_DEBUG))) {
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-	}
+	/*
+	 * If the guest has used debug registers, at least dr7
+	 * will be disabled while returning to the host.
+	 * If we don't have active breakpoints in the host, we don't
+	 * care about the messed up debug address registers. But if
+	 * we have some of them active, restore the old state.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_restore();
 
 	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
@@ -3682,13 +3961,13 @@
 
 	kvm_lapic_sync_from_vapic(vcpu);
 
-	r = kvm_x86_ops->handle_exit(kvm_run, vcpu);
+	r = kvm_x86_ops->handle_exit(vcpu);
 out:
 	return r;
 }
 
 
-static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static int __vcpu_run(struct kvm_vcpu *vcpu)
 {
 	int r;
 
@@ -3708,7 +3987,7 @@
 	r = 1;
 	while (r > 0) {
 		if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
-			r = vcpu_enter_guest(vcpu, kvm_run);
+			r = vcpu_enter_guest(vcpu);
 		else {
 			up_read(&vcpu->kvm->slots_lock);
 			kvm_vcpu_block(vcpu);
@@ -3736,14 +4015,14 @@
 		if (kvm_cpu_has_pending_timer(vcpu))
 			kvm_inject_pending_timer_irqs(vcpu);
 
-		if (dm_request_for_irq_injection(vcpu, kvm_run)) {
+		if (dm_request_for_irq_injection(vcpu)) {
 			r = -EINTR;
-			kvm_run->exit_reason = KVM_EXIT_INTR;
+			vcpu->run->exit_reason = KVM_EXIT_INTR;
 			++vcpu->stat.request_irq_exits;
 		}
 		if (signal_pending(current)) {
 			r = -EINTR;
-			kvm_run->exit_reason = KVM_EXIT_INTR;
+			vcpu->run->exit_reason = KVM_EXIT_INTR;
 			++vcpu->stat.signal_exits;
 		}
 		if (need_resched()) {
@@ -3754,7 +4033,7 @@
 	}
 
 	up_read(&vcpu->kvm->slots_lock);
-	post_kvm_run_save(vcpu, kvm_run);
+	post_kvm_run_save(vcpu);
 
 	vapic_exit(vcpu);
 
@@ -3787,15 +4066,13 @@
 		if (r)
 			goto out;
 	}
-#if CONFIG_HAS_IOMEM
 	if (vcpu->mmio_needed) {
 		memcpy(vcpu->mmio_data, kvm_run->mmio.data, 8);
 		vcpu->mmio_read_completed = 1;
 		vcpu->mmio_needed = 0;
 
 		down_read(&vcpu->kvm->slots_lock);
-		r = emulate_instruction(vcpu, kvm_run,
-					vcpu->arch.mmio_fault_cr2, 0,
+		r = emulate_instruction(vcpu, vcpu->arch.mmio_fault_cr2, 0,
 					EMULTYPE_NO_DECODE);
 		up_read(&vcpu->kvm->slots_lock);
 		if (r == EMULATE_DO_MMIO) {
@@ -3806,12 +4083,11 @@
 			goto out;
 		}
 	}
-#endif
 	if (kvm_run->exit_reason == KVM_EXIT_HYPERCALL)
 		kvm_register_write(vcpu, VCPU_REGS_RAX,
 				     kvm_run->hypercall.ret);
 
-	r = __vcpu_run(vcpu, kvm_run);
+	r = __vcpu_run(vcpu);
 
 out:
 	if (vcpu->sigset_active)
@@ -3845,13 +4121,7 @@
 #endif
 
 	regs->rip = kvm_rip_read(vcpu);
-	regs->rflags = kvm_x86_ops->get_rflags(vcpu);
-
-	/*
-	 * Don't leak debug flags in case they were set for guest debugging
-	 */
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		regs->rflags &= ~(X86_EFLAGS_TF | X86_EFLAGS_RF);
+	regs->rflags = kvm_get_rflags(vcpu);
 
 	vcpu_put(vcpu);
 
@@ -3879,12 +4149,10 @@
 	kvm_register_write(vcpu, VCPU_REGS_R13, regs->r13);
 	kvm_register_write(vcpu, VCPU_REGS_R14, regs->r14);
 	kvm_register_write(vcpu, VCPU_REGS_R15, regs->r15);
-
 #endif
 
 	kvm_rip_write(vcpu, regs->rip);
-	kvm_x86_ops->set_rflags(vcpu, regs->rflags);
-
+	kvm_set_rflags(vcpu, regs->rflags);
 
 	vcpu->arch.exception.pending = false;
 
@@ -4103,7 +4371,7 @@
 {
 	return (seg != VCPU_SREG_LDTR) &&
 		(seg != VCPU_SREG_TR) &&
-		(kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_VM);
+		(kvm_get_rflags(vcpu) & X86_EFLAGS_VM);
 }
 
 int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
@@ -4131,7 +4399,7 @@
 {
 	tss->cr3 = vcpu->arch.cr3;
 	tss->eip = kvm_rip_read(vcpu);
-	tss->eflags = kvm_x86_ops->get_rflags(vcpu);
+	tss->eflags = kvm_get_rflags(vcpu);
 	tss->eax = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	tss->ecx = kvm_register_read(vcpu, VCPU_REGS_RCX);
 	tss->edx = kvm_register_read(vcpu, VCPU_REGS_RDX);
@@ -4155,7 +4423,7 @@
 	kvm_set_cr3(vcpu, tss->cr3);
 
 	kvm_rip_write(vcpu, tss->eip);
-	kvm_x86_ops->set_rflags(vcpu, tss->eflags | 2);
+	kvm_set_rflags(vcpu, tss->eflags | 2);
 
 	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->eax);
 	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->ecx);
@@ -4193,7 +4461,7 @@
 				struct tss_segment_16 *tss)
 {
 	tss->ip = kvm_rip_read(vcpu);
-	tss->flag = kvm_x86_ops->get_rflags(vcpu);
+	tss->flag = kvm_get_rflags(vcpu);
 	tss->ax = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	tss->cx = kvm_register_read(vcpu, VCPU_REGS_RCX);
 	tss->dx = kvm_register_read(vcpu, VCPU_REGS_RDX);
@@ -4208,14 +4476,13 @@
 	tss->ss = get_segment_selector(vcpu, VCPU_SREG_SS);
 	tss->ds = get_segment_selector(vcpu, VCPU_SREG_DS);
 	tss->ldt = get_segment_selector(vcpu, VCPU_SREG_LDTR);
-	tss->prev_task_link = get_segment_selector(vcpu, VCPU_SREG_TR);
 }
 
 static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 				 struct tss_segment_16 *tss)
 {
 	kvm_rip_write(vcpu, tss->ip);
-	kvm_x86_ops->set_rflags(vcpu, tss->flag | 2);
+	kvm_set_rflags(vcpu, tss->flag | 2);
 	kvm_register_write(vcpu, VCPU_REGS_RAX, tss->ax);
 	kvm_register_write(vcpu, VCPU_REGS_RCX, tss->cx);
 	kvm_register_write(vcpu, VCPU_REGS_RDX, tss->dx);
@@ -4361,8 +4628,8 @@
 	}
 
 	if (reason == TASK_SWITCH_IRET) {
-		u32 eflags = kvm_x86_ops->get_rflags(vcpu);
-		kvm_x86_ops->set_rflags(vcpu, eflags & ~X86_EFLAGS_NT);
+		u32 eflags = kvm_get_rflags(vcpu);
+		kvm_set_rflags(vcpu, eflags & ~X86_EFLAGS_NT);
 	}
 
 	/* set back link to prev task only if NT bit is set in eflags
@@ -4370,11 +4637,6 @@
 	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
 		old_tss_sel = 0xffff;
 
-	/* set back link to prev task only if NT bit is set in eflags
-	   note that old_tss_sel is not used afetr this point */
-	if (reason != TASK_SWITCH_CALL && reason != TASK_SWITCH_GATE)
-		old_tss_sel = 0xffff;
-
 	if (nseg_desc.type & 8)
 		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_sel,
 					 old_tss_base, &nseg_desc);
@@ -4383,8 +4645,8 @@
 					 old_tss_base, &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
-		u32 eflags = kvm_x86_ops->get_rflags(vcpu);
-		kvm_x86_ops->set_rflags(vcpu, eflags | X86_EFLAGS_NT);
+		u32 eflags = kvm_get_rflags(vcpu);
+		kvm_set_rflags(vcpu, eflags | X86_EFLAGS_NT);
 	}
 
 	if (reason != TASK_SWITCH_IRET) {
@@ -4436,8 +4698,10 @@
 
 	mmu_reset_needed |= vcpu->arch.cr4 != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
-	if (!is_long_mode(vcpu) && is_pae(vcpu))
+	if (!is_long_mode(vcpu) && is_pae(vcpu)) {
 		load_pdptrs(vcpu, vcpu->arch.cr3);
+		mmu_reset_needed = 1;
+	}
 
 	if (mmu_reset_needed)
 		kvm_mmu_reset_context(vcpu);
@@ -4478,12 +4742,32 @@
 int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 					struct kvm_guest_debug *dbg)
 {
+	unsigned long rflags;
 	int i, r;
 
 	vcpu_load(vcpu);
 
-	if ((dbg->control & (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP)) ==
-	    (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_HW_BP)) {
+	if (dbg->control & (KVM_GUESTDBG_INJECT_DB | KVM_GUESTDBG_INJECT_BP)) {
+		r = -EBUSY;
+		if (vcpu->arch.exception.pending)
+			goto unlock_out;
+		if (dbg->control & KVM_GUESTDBG_INJECT_DB)
+			kvm_queue_exception(vcpu, DB_VECTOR);
+		else
+			kvm_queue_exception(vcpu, BP_VECTOR);
+	}
+
+	/*
+	 * Read rflags as long as potentially injected trace flags are still
+	 * filtered out.
+	 */
+	rflags = kvm_get_rflags(vcpu);
+
+	vcpu->guest_debug = dbg->control;
+	if (!(vcpu->guest_debug & KVM_GUESTDBG_ENABLE))
+		vcpu->guest_debug = 0;
+
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) {
 		for (i = 0; i < KVM_NR_DB_REGS; ++i)
 			vcpu->arch.eff_db[i] = dbg->arch.debugreg[i];
 		vcpu->arch.switch_db_regs =
@@ -4494,13 +4778,23 @@
 		vcpu->arch.switch_db_regs = (vcpu->arch.dr7 & DR7_BP_EN_MASK);
 	}
 
-	r = kvm_x86_ops->set_guest_debug(vcpu, dbg);
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+		vcpu->arch.singlestep_cs =
+			get_segment_selector(vcpu, VCPU_SREG_CS);
+		vcpu->arch.singlestep_rip = kvm_rip_read(vcpu);
+	}
 
-	if (dbg->control & KVM_GUESTDBG_INJECT_DB)
-		kvm_queue_exception(vcpu, DB_VECTOR);
-	else if (dbg->control & KVM_GUESTDBG_INJECT_BP)
-		kvm_queue_exception(vcpu, BP_VECTOR);
+	/*
+	 * Trigger an rflags update that will inject or remove the trace
+	 * flags.
+	 */
+	kvm_set_rflags(vcpu, rflags);
 
+	kvm_x86_ops->set_guest_debug(vcpu, dbg);
+
+	r = 0;
+
+unlock_out:
 	vcpu_put(vcpu);
 
 	return r;
@@ -4701,14 +4995,26 @@
 	return kvm_x86_ops->vcpu_reset(vcpu);
 }
 
-void kvm_arch_hardware_enable(void *garbage)
+int kvm_arch_hardware_enable(void *garbage)
 {
-	kvm_x86_ops->hardware_enable(garbage);
+	/*
+	 * Since this may be called from a hotplug notifcation,
+	 * we can't get the CPU frequency directly.
+	 */
+	if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) {
+		int cpu = raw_smp_processor_id();
+		per_cpu(cpu_tsc_khz, cpu) = 0;
+	}
+
+	kvm_shared_msr_cpu_online();
+
+	return kvm_x86_ops->hardware_enable(garbage);
 }
 
 void kvm_arch_hardware_disable(void *garbage)
 {
 	kvm_x86_ops->hardware_disable(garbage);
+	drop_user_return_notifiers(garbage);
 }
 
 int kvm_arch_hardware_setup(void)
@@ -4946,8 +5252,36 @@
 	return kvm_x86_ops->interrupt_allowed(vcpu);
 }
 
+unsigned long kvm_get_rflags(struct kvm_vcpu *vcpu)
+{
+	unsigned long rflags;
+
+	rflags = kvm_x86_ops->get_rflags(vcpu);
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		rflags &= ~(unsigned long)(X86_EFLAGS_TF | X86_EFLAGS_RF);
+	return rflags;
+}
+EXPORT_SYMBOL_GPL(kvm_get_rflags);
+
+void kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
+{
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP &&
+	    vcpu->arch.singlestep_cs ==
+			get_segment_selector(vcpu, VCPU_SREG_CS) &&
+	    vcpu->arch.singlestep_rip == kvm_rip_read(vcpu))
+		rflags |= X86_EFLAGS_TF | X86_EFLAGS_RF;
+	kvm_x86_ops->set_rflags(vcpu, rflags);
+}
+EXPORT_SYMBOL_GPL(kvm_set_rflags);
+
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_msr);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_cr);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmrun);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmexit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_vmexit_inject);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_nested_intr_vmexit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_invlpga);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_skinit);
diff --git a/arch/x86/lib/.gitignore b/arch/x86/lib/.gitignore
new file mode 100644
index 0000000..8df89f0
--- /dev/null
+++ b/arch/x86/lib/.gitignore
@@ -0,0 +1 @@
+inat-tables.c
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 85f5db9..a2d6472 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -2,12 +2,25 @@
 # Makefile for x86 specific library files.
 #
 
+inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk
+inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt
+quiet_cmd_inat_tables = GEN     $@
+      cmd_inat_tables = $(AWK) -f $(inat_tables_script) $(inat_tables_maps) > $@
+
+$(obj)/inat-tables.c: $(inat_tables_script) $(inat_tables_maps)
+	$(call cmd,inat_tables)
+
+$(obj)/inat.o: $(obj)/inat-tables.c
+
+clean-files := inat-tables.c
+
 obj-$(CONFIG_SMP) := msr.o
 
 lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
+lib-y += insn.o inat.o
 
 obj-y += msr-reg.o msr-reg-export.o
 
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 6ba0f7b..cf889d4 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -65,7 +65,7 @@
 	.endm
 
 /* Standard copy_to_user with segment limit checking */
-ENTRY(copy_to_user)
+ENTRY(_copy_to_user)
 	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rdi,%rcx
@@ -75,10 +75,10 @@
 	jae bad_to_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
-ENDPROC(copy_to_user)
+ENDPROC(_copy_to_user)
 
 /* Standard copy_from_user with segment limit checking */
-ENTRY(copy_from_user)
+ENTRY(_copy_from_user)
 	CFI_STARTPROC
 	GET_THREAD_INFO(%rax)
 	movq %rsi,%rcx
@@ -88,7 +88,7 @@
 	jae bad_from_user
 	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
 	CFI_ENDPROC
-ENDPROC(copy_from_user)
+ENDPROC(_copy_from_user)
 
 ENTRY(copy_user_generic)
 	CFI_STARTPROC
@@ -96,12 +96,6 @@
 	CFI_ENDPROC
 ENDPROC(copy_user_generic)
 
-ENTRY(__copy_from_user_inatomic)
-	CFI_STARTPROC
-	ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
-	CFI_ENDPROC
-ENDPROC(__copy_from_user_inatomic)
-
 	.section .fixup,"ax"
 	/* must zero dest */
 ENTRY(bad_from_user)
diff --git a/arch/x86/lib/inat.c b/arch/x86/lib/inat.c
new file mode 100644
index 0000000..46fc4ee
--- /dev/null
+++ b/arch/x86/lib/inat.c
@@ -0,0 +1,90 @@
+/*
+ * x86 instruction attribute tables
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#include <asm/insn.h>
+
+/* Attribute tables are generated from opcode map */
+#include "inat-tables.c"
+
+/* Attribute search APIs */
+insn_attr_t inat_get_opcode_attribute(insn_byte_t opcode)
+{
+	return inat_primary_table[opcode];
+}
+
+insn_attr_t inat_get_escape_attribute(insn_byte_t opcode, insn_byte_t last_pfx,
+				      insn_attr_t esc_attr)
+{
+	const insn_attr_t *table;
+	insn_attr_t lpfx_attr;
+	int n, m = 0;
+
+	n = inat_escape_id(esc_attr);
+	if (last_pfx) {
+		lpfx_attr = inat_get_opcode_attribute(last_pfx);
+		m = inat_last_prefix_id(lpfx_attr);
+	}
+	table = inat_escape_tables[n][0];
+	if (!table)
+		return 0;
+	if (inat_has_variant(table[opcode]) && m) {
+		table = inat_escape_tables[n][m];
+		if (!table)
+			return 0;
+	}
+	return table[opcode];
+}
+
+insn_attr_t inat_get_group_attribute(insn_byte_t modrm, insn_byte_t last_pfx,
+				     insn_attr_t grp_attr)
+{
+	const insn_attr_t *table;
+	insn_attr_t lpfx_attr;
+	int n, m = 0;
+
+	n = inat_group_id(grp_attr);
+	if (last_pfx) {
+		lpfx_attr = inat_get_opcode_attribute(last_pfx);
+		m = inat_last_prefix_id(lpfx_attr);
+	}
+	table = inat_group_tables[n][0];
+	if (!table)
+		return inat_group_common_attribute(grp_attr);
+	if (inat_has_variant(table[X86_MODRM_REG(modrm)]) && m) {
+		table = inat_group_tables[n][m];
+		if (!table)
+			return inat_group_common_attribute(grp_attr);
+	}
+	return table[X86_MODRM_REG(modrm)] |
+	       inat_group_common_attribute(grp_attr);
+}
+
+insn_attr_t inat_get_avx_attribute(insn_byte_t opcode, insn_byte_t vex_m,
+				   insn_byte_t vex_p)
+{
+	const insn_attr_t *table;
+	if (vex_m > X86_VEX_M_MAX || vex_p > INAT_LSTPFX_MAX)
+		return 0;
+	table = inat_avx_tables[vex_m][vex_p];
+	if (!table)
+		return 0;
+	return table[opcode];
+}
+
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
new file mode 100644
index 0000000..9f33b98
--- /dev/null
+++ b/arch/x86/lib/insn.c
@@ -0,0 +1,516 @@
+/*
+ * x86 instruction analysis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004, 2009
+ */
+
+#include <linux/string.h>
+#include <asm/inat.h>
+#include <asm/insn.h>
+
+#define get_next(t, insn)	\
+	({t r; r = *(t*)insn->next_byte; insn->next_byte += sizeof(t); r; })
+
+#define peek_next(t, insn)	\
+	({t r; r = *(t*)insn->next_byte; r; })
+
+#define peek_nbyte_next(t, insn, n)	\
+	({t r; r = *(t*)((insn)->next_byte + n); r; })
+
+/**
+ * insn_init() - initialize struct insn
+ * @insn:	&struct insn to be initialized
+ * @kaddr:	address (in kernel memory) of instruction (or copy thereof)
+ * @x86_64:	!0 for 64-bit kernel or 64-bit app
+ */
+void insn_init(struct insn *insn, const void *kaddr, int x86_64)
+{
+	memset(insn, 0, sizeof(*insn));
+	insn->kaddr = kaddr;
+	insn->next_byte = kaddr;
+	insn->x86_64 = x86_64 ? 1 : 0;
+	insn->opnd_bytes = 4;
+	if (x86_64)
+		insn->addr_bytes = 8;
+	else
+		insn->addr_bytes = 4;
+}
+
+/**
+ * insn_get_prefixes - scan x86 instruction prefix bytes
+ * @insn:	&struct insn containing instruction
+ *
+ * Populates the @insn->prefixes bitmap, and updates @insn->next_byte
+ * to point to the (first) opcode.  No effect if @insn->prefixes.got
+ * is already set.
+ */
+void insn_get_prefixes(struct insn *insn)
+{
+	struct insn_field *prefixes = &insn->prefixes;
+	insn_attr_t attr;
+	insn_byte_t b, lb;
+	int i, nb;
+
+	if (prefixes->got)
+		return;
+
+	nb = 0;
+	lb = 0;
+	b = peek_next(insn_byte_t, insn);
+	attr = inat_get_opcode_attribute(b);
+	while (inat_is_legacy_prefix(attr)) {
+		/* Skip if same prefix */
+		for (i = 0; i < nb; i++)
+			if (prefixes->bytes[i] == b)
+				goto found;
+		if (nb == 4)
+			/* Invalid instruction */
+			break;
+		prefixes->bytes[nb++] = b;
+		if (inat_is_address_size_prefix(attr)) {
+			/* address size switches 2/4 or 4/8 */
+			if (insn->x86_64)
+				insn->addr_bytes ^= 12;
+			else
+				insn->addr_bytes ^= 6;
+		} else if (inat_is_operand_size_prefix(attr)) {
+			/* oprand size switches 2/4 */
+			insn->opnd_bytes ^= 6;
+		}
+found:
+		prefixes->nbytes++;
+		insn->next_byte++;
+		lb = b;
+		b = peek_next(insn_byte_t, insn);
+		attr = inat_get_opcode_attribute(b);
+	}
+	/* Set the last prefix */
+	if (lb && lb != insn->prefixes.bytes[3]) {
+		if (unlikely(insn->prefixes.bytes[3])) {
+			/* Swap the last prefix */
+			b = insn->prefixes.bytes[3];
+			for (i = 0; i < nb; i++)
+				if (prefixes->bytes[i] == lb)
+					prefixes->bytes[i] = b;
+		}
+		insn->prefixes.bytes[3] = lb;
+	}
+
+	/* Decode REX prefix */
+	if (insn->x86_64) {
+		b = peek_next(insn_byte_t, insn);
+		attr = inat_get_opcode_attribute(b);
+		if (inat_is_rex_prefix(attr)) {
+			insn->rex_prefix.value = b;
+			insn->rex_prefix.nbytes = 1;
+			insn->next_byte++;
+			if (X86_REX_W(b))
+				/* REX.W overrides opnd_size */
+				insn->opnd_bytes = 8;
+		}
+	}
+	insn->rex_prefix.got = 1;
+
+	/* Decode VEX prefix */
+	b = peek_next(insn_byte_t, insn);
+	attr = inat_get_opcode_attribute(b);
+	if (inat_is_vex_prefix(attr)) {
+		insn_byte_t b2 = peek_nbyte_next(insn_byte_t, insn, 1);
+		if (!insn->x86_64) {
+			/*
+			 * In 32-bits mode, if the [7:6] bits (mod bits of
+			 * ModRM) on the second byte are not 11b, it is
+			 * LDS or LES.
+			 */
+			if (X86_MODRM_MOD(b2) != 3)
+				goto vex_end;
+		}
+		insn->vex_prefix.bytes[0] = b;
+		insn->vex_prefix.bytes[1] = b2;
+		if (inat_is_vex3_prefix(attr)) {
+			b2 = peek_nbyte_next(insn_byte_t, insn, 2);
+			insn->vex_prefix.bytes[2] = b2;
+			insn->vex_prefix.nbytes = 3;
+			insn->next_byte += 3;
+			if (insn->x86_64 && X86_VEX_W(b2))
+				/* VEX.W overrides opnd_size */
+				insn->opnd_bytes = 8;
+		} else {
+			insn->vex_prefix.nbytes = 2;
+			insn->next_byte += 2;
+		}
+	}
+vex_end:
+	insn->vex_prefix.got = 1;
+
+	prefixes->got = 1;
+	return;
+}
+
+/**
+ * insn_get_opcode - collect opcode(s)
+ * @insn:	&struct insn containing instruction
+ *
+ * Populates @insn->opcode, updates @insn->next_byte to point past the
+ * opcode byte(s), and set @insn->attr (except for groups).
+ * If necessary, first collects any preceding (prefix) bytes.
+ * Sets @insn->opcode.value = opcode1.  No effect if @insn->opcode.got
+ * is already 1.
+ */
+void insn_get_opcode(struct insn *insn)
+{
+	struct insn_field *opcode = &insn->opcode;
+	insn_byte_t op, pfx;
+	if (opcode->got)
+		return;
+	if (!insn->prefixes.got)
+		insn_get_prefixes(insn);
+
+	/* Get first opcode */
+	op = get_next(insn_byte_t, insn);
+	opcode->bytes[0] = op;
+	opcode->nbytes = 1;
+
+	/* Check if there is VEX prefix or not */
+	if (insn_is_avx(insn)) {
+		insn_byte_t m, p;
+		m = insn_vex_m_bits(insn);
+		p = insn_vex_p_bits(insn);
+		insn->attr = inat_get_avx_attribute(op, m, p);
+		if (!inat_accept_vex(insn->attr))
+			insn->attr = 0;	/* This instruction is bad */
+		goto end;	/* VEX has only 1 byte for opcode */
+	}
+
+	insn->attr = inat_get_opcode_attribute(op);
+	while (inat_is_escape(insn->attr)) {
+		/* Get escaped opcode */
+		op = get_next(insn_byte_t, insn);
+		opcode->bytes[opcode->nbytes++] = op;
+		pfx = insn_last_prefix(insn);
+		insn->attr = inat_get_escape_attribute(op, pfx, insn->attr);
+	}
+	if (inat_must_vex(insn->attr))
+		insn->attr = 0;	/* This instruction is bad */
+end:
+	opcode->got = 1;
+}
+
+/**
+ * insn_get_modrm - collect ModRM byte, if any
+ * @insn:	&struct insn containing instruction
+ *
+ * Populates @insn->modrm and updates @insn->next_byte to point past the
+ * ModRM byte, if any.  If necessary, first collects the preceding bytes
+ * (prefixes and opcode(s)).  No effect if @insn->modrm.got is already 1.
+ */
+void insn_get_modrm(struct insn *insn)
+{
+	struct insn_field *modrm = &insn->modrm;
+	insn_byte_t pfx, mod;
+	if (modrm->got)
+		return;
+	if (!insn->opcode.got)
+		insn_get_opcode(insn);
+
+	if (inat_has_modrm(insn->attr)) {
+		mod = get_next(insn_byte_t, insn);
+		modrm->value = mod;
+		modrm->nbytes = 1;
+		if (inat_is_group(insn->attr)) {
+			pfx = insn_last_prefix(insn);
+			insn->attr = inat_get_group_attribute(mod, pfx,
+							      insn->attr);
+		}
+	}
+
+	if (insn->x86_64 && inat_is_force64(insn->attr))
+		insn->opnd_bytes = 8;
+	modrm->got = 1;
+}
+
+
+/**
+ * insn_rip_relative() - Does instruction use RIP-relative addressing mode?
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * ModRM byte.  No effect if @insn->x86_64 is 0.
+ */
+int insn_rip_relative(struct insn *insn)
+{
+	struct insn_field *modrm = &insn->modrm;
+
+	if (!insn->x86_64)
+		return 0;
+	if (!modrm->got)
+		insn_get_modrm(insn);
+	/*
+	 * For rip-relative instructions, the mod field (top 2 bits)
+	 * is zero and the r/m field (bottom 3 bits) is 0x5.
+	 */
+	return (modrm->nbytes && (modrm->value & 0xc7) == 0x5);
+}
+
+/**
+ * insn_get_sib() - Get the SIB byte of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * ModRM byte.
+ */
+void insn_get_sib(struct insn *insn)
+{
+	insn_byte_t modrm;
+
+	if (insn->sib.got)
+		return;
+	if (!insn->modrm.got)
+		insn_get_modrm(insn);
+	if (insn->modrm.nbytes) {
+		modrm = (insn_byte_t)insn->modrm.value;
+		if (insn->addr_bytes != 2 &&
+		    X86_MODRM_MOD(modrm) != 3 && X86_MODRM_RM(modrm) == 4) {
+			insn->sib.value = get_next(insn_byte_t, insn);
+			insn->sib.nbytes = 1;
+		}
+	}
+	insn->sib.got = 1;
+}
+
+
+/**
+ * insn_get_displacement() - Get the displacement of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * SIB byte.
+ * Displacement value is sign-expanded.
+ */
+void insn_get_displacement(struct insn *insn)
+{
+	insn_byte_t mod, rm, base;
+
+	if (insn->displacement.got)
+		return;
+	if (!insn->sib.got)
+		insn_get_sib(insn);
+	if (insn->modrm.nbytes) {
+		/*
+		 * Interpreting the modrm byte:
+		 * mod = 00 - no displacement fields (exceptions below)
+		 * mod = 01 - 1-byte displacement field
+		 * mod = 10 - displacement field is 4 bytes, or 2 bytes if
+		 * 	address size = 2 (0x67 prefix in 32-bit mode)
+		 * mod = 11 - no memory operand
+		 *
+		 * If address size = 2...
+		 * mod = 00, r/m = 110 - displacement field is 2 bytes
+		 *
+		 * If address size != 2...
+		 * mod != 11, r/m = 100 - SIB byte exists
+		 * mod = 00, SIB base = 101 - displacement field is 4 bytes
+		 * mod = 00, r/m = 101 - rip-relative addressing, displacement
+		 * 	field is 4 bytes
+		 */
+		mod = X86_MODRM_MOD(insn->modrm.value);
+		rm = X86_MODRM_RM(insn->modrm.value);
+		base = X86_SIB_BASE(insn->sib.value);
+		if (mod == 3)
+			goto out;
+		if (mod == 1) {
+			insn->displacement.value = get_next(char, insn);
+			insn->displacement.nbytes = 1;
+		} else if (insn->addr_bytes == 2) {
+			if ((mod == 0 && rm == 6) || mod == 2) {
+				insn->displacement.value =
+					 get_next(short, insn);
+				insn->displacement.nbytes = 2;
+			}
+		} else {
+			if ((mod == 0 && rm == 5) || mod == 2 ||
+			    (mod == 0 && base == 5)) {
+				insn->displacement.value = get_next(int, insn);
+				insn->displacement.nbytes = 4;
+			}
+		}
+	}
+out:
+	insn->displacement.got = 1;
+}
+
+/* Decode moffset16/32/64 */
+static void __get_moffset(struct insn *insn)
+{
+	switch (insn->addr_bytes) {
+	case 2:
+		insn->moffset1.value = get_next(short, insn);
+		insn->moffset1.nbytes = 2;
+		break;
+	case 4:
+		insn->moffset1.value = get_next(int, insn);
+		insn->moffset1.nbytes = 4;
+		break;
+	case 8:
+		insn->moffset1.value = get_next(int, insn);
+		insn->moffset1.nbytes = 4;
+		insn->moffset2.value = get_next(int, insn);
+		insn->moffset2.nbytes = 4;
+		break;
+	}
+	insn->moffset1.got = insn->moffset2.got = 1;
+}
+
+/* Decode imm v32(Iz) */
+static void __get_immv32(struct insn *insn)
+{
+	switch (insn->opnd_bytes) {
+	case 2:
+		insn->immediate.value = get_next(short, insn);
+		insn->immediate.nbytes = 2;
+		break;
+	case 4:
+	case 8:
+		insn->immediate.value = get_next(int, insn);
+		insn->immediate.nbytes = 4;
+		break;
+	}
+}
+
+/* Decode imm v64(Iv/Ov) */
+static void __get_immv(struct insn *insn)
+{
+	switch (insn->opnd_bytes) {
+	case 2:
+		insn->immediate1.value = get_next(short, insn);
+		insn->immediate1.nbytes = 2;
+		break;
+	case 4:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		break;
+	case 8:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		insn->immediate2.value = get_next(int, insn);
+		insn->immediate2.nbytes = 4;
+		break;
+	}
+	insn->immediate1.got = insn->immediate2.got = 1;
+}
+
+/* Decode ptr16:16/32(Ap) */
+static void __get_immptr(struct insn *insn)
+{
+	switch (insn->opnd_bytes) {
+	case 2:
+		insn->immediate1.value = get_next(short, insn);
+		insn->immediate1.nbytes = 2;
+		break;
+	case 4:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		break;
+	case 8:
+		/* ptr16:64 is not exist (no segment) */
+		return;
+	}
+	insn->immediate2.value = get_next(unsigned short, insn);
+	insn->immediate2.nbytes = 2;
+	insn->immediate1.got = insn->immediate2.got = 1;
+}
+
+/**
+ * insn_get_immediate() - Get the immediates of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * displacement bytes.
+ * Basically, most of immediates are sign-expanded. Unsigned-value can be
+ * get by bit masking with ((1 << (nbytes * 8)) - 1)
+ */
+void insn_get_immediate(struct insn *insn)
+{
+	if (insn->immediate.got)
+		return;
+	if (!insn->displacement.got)
+		insn_get_displacement(insn);
+
+	if (inat_has_moffset(insn->attr)) {
+		__get_moffset(insn);
+		goto done;
+	}
+
+	if (!inat_has_immediate(insn->attr))
+		/* no immediates */
+		goto done;
+
+	switch (inat_immediate_size(insn->attr)) {
+	case INAT_IMM_BYTE:
+		insn->immediate.value = get_next(char, insn);
+		insn->immediate.nbytes = 1;
+		break;
+	case INAT_IMM_WORD:
+		insn->immediate.value = get_next(short, insn);
+		insn->immediate.nbytes = 2;
+		break;
+	case INAT_IMM_DWORD:
+		insn->immediate.value = get_next(int, insn);
+		insn->immediate.nbytes = 4;
+		break;
+	case INAT_IMM_QWORD:
+		insn->immediate1.value = get_next(int, insn);
+		insn->immediate1.nbytes = 4;
+		insn->immediate2.value = get_next(int, insn);
+		insn->immediate2.nbytes = 4;
+		break;
+	case INAT_IMM_PTR:
+		__get_immptr(insn);
+		break;
+	case INAT_IMM_VWORD32:
+		__get_immv32(insn);
+		break;
+	case INAT_IMM_VWORD:
+		__get_immv(insn);
+		break;
+	default:
+		break;
+	}
+	if (inat_has_second_immediate(insn->attr)) {
+		insn->immediate2.value = get_next(char, insn);
+		insn->immediate2.nbytes = 1;
+	}
+done:
+	insn->immediate.got = 1;
+}
+
+/**
+ * insn_get_length() - Get the length of instruction
+ * @insn:	&struct insn containing instruction
+ *
+ * If necessary, first collects the instruction up to and including the
+ * immediates bytes.
+ */
+void insn_get_length(struct insn *insn)
+{
+	if (insn->length)
+		return;
+	if (!insn->immediate.got)
+		insn_get_immediate(insn);
+	insn->length = (unsigned char)((unsigned long)insn->next_byte
+				     - (unsigned long)insn->kaddr);
+}
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 33a1e3c..41628b1 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -71,14 +71,9 @@
 }
 EXPORT_SYMBOL(wrmsr_on_cpu);
 
-/* rdmsr on a bunch of CPUs
- *
- * @mask:       which CPUs
- * @msr_no:     which MSR
- * @msrs:       array of MSR values
- *
- */
-void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no,
+			    struct msr *msrs,
+			    void (*msr_func) (void *info))
 {
 	struct msr_info rv;
 	int this_cpu;
@@ -92,11 +87,23 @@
 	this_cpu = get_cpu();
 
 	if (cpumask_test_cpu(this_cpu, mask))
-		__rdmsr_on_cpu(&rv);
+		msr_func(&rv);
 
-	smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
+	smp_call_function_many(mask, msr_func, &rv, 1);
 	put_cpu();
 }
+
+/* rdmsr on a bunch of CPUs
+ *
+ * @mask:       which CPUs
+ * @msr_no:     which MSR
+ * @msrs:       array of MSR values
+ *
+ */
+void rdmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs)
+{
+	__rwmsr_on_cpus(mask, msr_no, msrs, __rdmsr_on_cpu);
+}
 EXPORT_SYMBOL(rdmsr_on_cpus);
 
 /*
@@ -107,24 +114,9 @@
  * @msrs:       array of MSR values
  *
  */
-void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs)
 {
-	struct msr_info rv;
-	int this_cpu;
-
-	memset(&rv, 0, sizeof(rv));
-
-	rv.off    = cpumask_first(mask);
-	rv.msrs   = msrs;
-	rv.msr_no = msr_no;
-
-	this_cpu = get_cpu();
-
-	if (cpumask_test_cpu(this_cpu, mask))
-		__wrmsr_on_cpu(&rv);
-
-	smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
-	put_cpu();
+	__rwmsr_on_cpus(mask, msr_no, msrs, __wrmsr_on_cpu);
 }
 EXPORT_SYMBOL(wrmsr_on_cpus);
 
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index 1f118d4..e218d5d 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -874,7 +874,7 @@
  * data to the requested size using zero bytes.
  */
 unsigned long
-copy_from_user(void *to, const void __user *from, unsigned long n)
+_copy_from_user(void *to, const void __user *from, unsigned long n)
 {
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);
@@ -882,4 +882,10 @@
 		memset(to, 0, n);
 	return n;
 }
-EXPORT_SYMBOL(copy_from_user);
+EXPORT_SYMBOL(_copy_from_user);
+
+void copy_from_user_overflow(void)
+{
+	WARN(1, "Buffer overflow detected!\n");
+}
+EXPORT_SYMBOL(copy_from_user_overflow);
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
new file mode 100644
index 0000000..a793da5
--- /dev/null
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -0,0 +1,893 @@
+# x86 Opcode Maps
+#
+#<Opcode maps>
+# Table: table-name
+# Referrer: escaped-name
+# AVXcode: avx-code
+# opcode: mnemonic|GrpXXX [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
+# (or)
+# opcode: escape # escaped-name
+# EndTable
+#
+#<group maps>
+# GrpTable: GrpXXX
+# reg:  mnemonic [operand1[,operand2...]] [(extra1)[,(extra2)...] [| 2nd-mnemonic ...]
+# EndTable
+#
+# AVX Superscripts
+#  (VEX): this opcode can accept VEX prefix.
+#  (oVEX): this opcode requires VEX prefix.
+#  (o128): this opcode only supports 128bit VEX.
+#  (o256): this opcode only supports 256bit VEX.
+#
+
+Table: one byte opcode
+Referrer:
+AVXcode:
+# 0x00 - 0x0f
+00: ADD Eb,Gb
+01: ADD Ev,Gv
+02: ADD Gb,Eb
+03: ADD Gv,Ev
+04: ADD AL,Ib
+05: ADD rAX,Iz
+06: PUSH ES (i64)
+07: POP ES (i64)
+08: OR Eb,Gb
+09: OR Ev,Gv
+0a: OR Gb,Eb
+0b: OR Gv,Ev
+0c: OR AL,Ib
+0d: OR rAX,Iz
+0e: PUSH CS (i64)
+0f: escape # 2-byte escape
+# 0x10 - 0x1f
+10: ADC Eb,Gb
+11: ADC Ev,Gv
+12: ADC Gb,Eb
+13: ADC Gv,Ev
+14: ADC AL,Ib
+15: ADC rAX,Iz
+16: PUSH SS (i64)
+17: POP SS (i64)
+18: SBB Eb,Gb
+19: SBB Ev,Gv
+1a: SBB Gb,Eb
+1b: SBB Gv,Ev
+1c: SBB AL,Ib
+1d: SBB rAX,Iz
+1e: PUSH DS (i64)
+1f: POP DS (i64)
+# 0x20 - 0x2f
+20: AND Eb,Gb
+21: AND Ev,Gv
+22: AND Gb,Eb
+23: AND Gv,Ev
+24: AND AL,Ib
+25: AND rAx,Iz
+26: SEG=ES (Prefix)
+27: DAA (i64)
+28: SUB Eb,Gb
+29: SUB Ev,Gv
+2a: SUB Gb,Eb
+2b: SUB Gv,Ev
+2c: SUB AL,Ib
+2d: SUB rAX,Iz
+2e: SEG=CS (Prefix)
+2f: DAS (i64)
+# 0x30 - 0x3f
+30: XOR Eb,Gb
+31: XOR Ev,Gv
+32: XOR Gb,Eb
+33: XOR Gv,Ev
+34: XOR AL,Ib
+35: XOR rAX,Iz
+36: SEG=SS (Prefix)
+37: AAA (i64)
+38: CMP Eb,Gb
+39: CMP Ev,Gv
+3a: CMP Gb,Eb
+3b: CMP Gv,Ev
+3c: CMP AL,Ib
+3d: CMP rAX,Iz
+3e: SEG=DS (Prefix)
+3f: AAS (i64)
+# 0x40 - 0x4f
+40: INC eAX (i64) | REX (o64)
+41: INC eCX (i64) | REX.B (o64)
+42: INC eDX (i64) | REX.X (o64)
+43: INC eBX (i64) | REX.XB (o64)
+44: INC eSP (i64) | REX.R (o64)
+45: INC eBP (i64) | REX.RB (o64)
+46: INC eSI (i64) | REX.RX (o64)
+47: INC eDI (i64) | REX.RXB (o64)
+48: DEC eAX (i64) | REX.W (o64)
+49: DEC eCX (i64) | REX.WB (o64)
+4a: DEC eDX (i64) | REX.WX (o64)
+4b: DEC eBX (i64) | REX.WXB (o64)
+4c: DEC eSP (i64) | REX.WR (o64)
+4d: DEC eBP (i64) | REX.WRB (o64)
+4e: DEC eSI (i64) | REX.WRX (o64)
+4f: DEC eDI (i64) | REX.WRXB (o64)
+# 0x50 - 0x5f
+50: PUSH rAX/r8 (d64)
+51: PUSH rCX/r9 (d64)
+52: PUSH rDX/r10 (d64)
+53: PUSH rBX/r11 (d64)
+54: PUSH rSP/r12 (d64)
+55: PUSH rBP/r13 (d64)
+56: PUSH rSI/r14 (d64)
+57: PUSH rDI/r15 (d64)
+58: POP rAX/r8 (d64)
+59: POP rCX/r9 (d64)
+5a: POP rDX/r10 (d64)
+5b: POP rBX/r11 (d64)
+5c: POP rSP/r12 (d64)
+5d: POP rBP/r13 (d64)
+5e: POP rSI/r14 (d64)
+5f: POP rDI/r15 (d64)
+# 0x60 - 0x6f
+60: PUSHA/PUSHAD (i64)
+61: POPA/POPAD (i64)
+62: BOUND Gv,Ma (i64)
+63: ARPL Ew,Gw (i64) | MOVSXD Gv,Ev (o64)
+64: SEG=FS (Prefix)
+65: SEG=GS (Prefix)
+66: Operand-Size (Prefix)
+67: Address-Size (Prefix)
+68: PUSH Iz (d64)
+69: IMUL Gv,Ev,Iz
+6a: PUSH Ib (d64)
+6b: IMUL Gv,Ev,Ib
+6c: INS/INSB Yb,DX
+6d: INS/INSW/INSD Yz,DX
+6e: OUTS/OUTSB DX,Xb
+6f: OUTS/OUTSW/OUTSD DX,Xz
+# 0x70 - 0x7f
+70: JO Jb
+71: JNO Jb
+72: JB/JNAE/JC Jb
+73: JNB/JAE/JNC Jb
+74: JZ/JE Jb
+75: JNZ/JNE Jb
+76: JBE/JNA Jb
+77: JNBE/JA Jb
+78: JS Jb
+79: JNS Jb
+7a: JP/JPE Jb
+7b: JNP/JPO Jb
+7c: JL/JNGE Jb
+7d: JNL/JGE Jb
+7e: JLE/JNG Jb
+7f: JNLE/JG Jb
+# 0x80 - 0x8f
+80: Grp1 Eb,Ib (1A)
+81: Grp1 Ev,Iz (1A)
+82: Grp1 Eb,Ib (1A),(i64)
+83: Grp1 Ev,Ib (1A)
+84: TEST Eb,Gb
+85: TEST Ev,Gv
+86: XCHG Eb,Gb
+87: XCHG Ev,Gv
+88: MOV Eb,Gb
+89: MOV Ev,Gv
+8a: MOV Gb,Eb
+8b: MOV Gv,Ev
+8c: MOV Ev,Sw
+8d: LEA Gv,M
+8e: MOV Sw,Ew
+8f: Grp1A (1A) | POP Ev (d64)
+# 0x90 - 0x9f
+90: NOP | PAUSE (F3) | XCHG r8,rAX
+91: XCHG rCX/r9,rAX
+92: XCHG rDX/r10,rAX
+93: XCHG rBX/r11,rAX
+94: XCHG rSP/r12,rAX
+95: XCHG rBP/r13,rAX
+96: XCHG rSI/r14,rAX
+97: XCHG rDI/r15,rAX
+98: CBW/CWDE/CDQE
+99: CWD/CDQ/CQO
+9a: CALLF Ap (i64)
+9b: FWAIT/WAIT
+9c: PUSHF/D/Q Fv (d64)
+9d: POPF/D/Q Fv (d64)
+9e: SAHF
+9f: LAHF
+# 0xa0 - 0xaf
+a0: MOV AL,Ob
+a1: MOV rAX,Ov
+a2: MOV Ob,AL
+a3: MOV Ov,rAX
+a4: MOVS/B Xb,Yb
+a5: MOVS/W/D/Q Xv,Yv
+a6: CMPS/B Xb,Yb
+a7: CMPS/W/D Xv,Yv
+a8: TEST AL,Ib
+a9: TEST rAX,Iz
+aa: STOS/B Yb,AL
+ab: STOS/W/D/Q Yv,rAX
+ac: LODS/B AL,Xb
+ad: LODS/W/D/Q rAX,Xv
+ae: SCAS/B AL,Yb
+af: SCAS/W/D/Q rAX,Xv
+# 0xb0 - 0xbf
+b0: MOV AL/R8L,Ib
+b1: MOV CL/R9L,Ib
+b2: MOV DL/R10L,Ib
+b3: MOV BL/R11L,Ib
+b4: MOV AH/R12L,Ib
+b5: MOV CH/R13L,Ib
+b6: MOV DH/R14L,Ib
+b7: MOV BH/R15L,Ib
+b8: MOV rAX/r8,Iv
+b9: MOV rCX/r9,Iv
+ba: MOV rDX/r10,Iv
+bb: MOV rBX/r11,Iv
+bc: MOV rSP/r12,Iv
+bd: MOV rBP/r13,Iv
+be: MOV rSI/r14,Iv
+bf: MOV rDI/r15,Iv
+# 0xc0 - 0xcf
+c0: Grp2 Eb,Ib (1A)
+c1: Grp2 Ev,Ib (1A)
+c2: RETN Iw (f64)
+c3: RETN
+c4: LES Gz,Mp (i64) | 3bytes-VEX (Prefix)
+c5: LDS Gz,Mp (i64) | 2bytes-VEX (Prefix)
+c6: Grp11 Eb,Ib (1A)
+c7: Grp11 Ev,Iz (1A)
+c8: ENTER Iw,Ib
+c9: LEAVE (d64)
+ca: RETF Iw
+cb: RETF
+cc: INT3
+cd: INT Ib
+ce: INTO (i64)
+cf: IRET/D/Q
+# 0xd0 - 0xdf
+d0: Grp2 Eb,1 (1A)
+d1: Grp2 Ev,1 (1A)
+d2: Grp2 Eb,CL (1A)
+d3: Grp2 Ev,CL (1A)
+d4: AAM Ib (i64)
+d5: AAD Ib (i64)
+d6:
+d7: XLAT/XLATB
+d8: ESC
+d9: ESC
+da: ESC
+db: ESC
+dc: ESC
+dd: ESC
+de: ESC
+df: ESC
+# 0xe0 - 0xef
+e0: LOOPNE/LOOPNZ Jb (f64)
+e1: LOOPE/LOOPZ Jb (f64)
+e2: LOOP Jb (f64)
+e3: JrCXZ Jb (f64)
+e4: IN AL,Ib
+e5: IN eAX,Ib
+e6: OUT Ib,AL
+e7: OUT Ib,eAX
+e8: CALL Jz (f64)
+e9: JMP-near Jz (f64)
+ea: JMP-far Ap (i64)
+eb: JMP-short Jb (f64)
+ec: IN AL,DX
+ed: IN eAX,DX
+ee: OUT DX,AL
+ef: OUT DX,eAX
+# 0xf0 - 0xff
+f0: LOCK (Prefix)
+f1:
+f2: REPNE (Prefix)
+f3: REP/REPE (Prefix)
+f4: HLT
+f5: CMC
+f6: Grp3_1 Eb (1A)
+f7: Grp3_2 Ev (1A)
+f8: CLC
+f9: STC
+fa: CLI
+fb: STI
+fc: CLD
+fd: STD
+fe: Grp4 (1A)
+ff: Grp5 (1A)
+EndTable
+
+Table: 2-byte opcode (0x0f)
+Referrer: 2-byte escape
+AVXcode: 1
+# 0x0f 0x00-0x0f
+00: Grp6 (1A)
+01: Grp7 (1A)
+02: LAR Gv,Ew
+03: LSL Gv,Ew
+04:
+05: SYSCALL (o64)
+06: CLTS
+07: SYSRET (o64)
+08: INVD
+09: WBINVD
+0a:
+0b: UD2 (1B)
+0c:
+0d: NOP Ev | GrpP
+0e: FEMMS
+# 3DNow! uses the last imm byte as opcode extension.
+0f: 3DNow! Pq,Qq,Ib
+# 0x0f 0x10-0x1f
+10: movups Vps,Wps (VEX) | movss Vss,Wss (F3),(VEX),(o128) | movupd Vpd,Wpd (66),(VEX) | movsd Vsd,Wsd (F2),(VEX),(o128)
+11: movups Wps,Vps (VEX) | movss Wss,Vss (F3),(VEX),(o128) | movupd Wpd,Vpd (66),(VEX) | movsd Wsd,Vsd (F2),(VEX),(o128)
+12: movlps Vq,Mq (VEX),(o128) | movlpd Vq,Mq (66),(VEX),(o128) | movhlps Vq,Uq (VEX),(o128) | movddup Vq,Wq (F2),(VEX) | movsldup Vq,Wq (F3),(VEX)
+13: mpvlps Mq,Vq (VEX),(o128) | movlpd Mq,Vq (66),(VEX),(o128)
+14: unpcklps Vps,Wq (VEX) | unpcklpd Vpd,Wq (66),(VEX)
+15: unpckhps Vps,Wq (VEX) | unpckhpd Vpd,Wq (66),(VEX)
+16: movhps Vq,Mq (VEX),(o128) | movhpd Vq,Mq (66),(VEX),(o128) | movlsps Vq,Uq (VEX),(o128) | movshdup Vq,Wq (F3),(VEX)
+17: movhps Mq,Vq (VEX),(o128) | movhpd Mq,Vq (66),(VEX),(o128)
+18: Grp16 (1A)
+19:
+1a:
+1b:
+1c:
+1d:
+1e:
+1f: NOP Ev
+# 0x0f 0x20-0x2f
+20: MOV Rd,Cd
+21: MOV Rd,Dd
+22: MOV Cd,Rd
+23: MOV Dd,Rd
+24:
+25:
+26:
+27:
+28: movaps Vps,Wps (VEX) | movapd Vpd,Wpd (66),(VEX)
+29: movaps Wps,Vps (VEX) | movapd Wpd,Vpd (66),(VEX)
+2a: cvtpi2ps Vps,Qpi | cvtsi2ss Vss,Ed/q (F3),(VEX),(o128) | cvtpi2pd Vpd,Qpi (66) | cvtsi2sd Vsd,Ed/q (F2),(VEX),(o128)
+2b: movntps Mps,Vps (VEX) | movntpd Mpd,Vpd (66),(VEX)
+2c: cvttps2pi Ppi,Wps | cvttss2si  Gd/q,Wss (F3),(VEX),(o128) | cvttpd2pi Ppi,Wpd (66) | cvttsd2si Gd/q,Wsd (F2),(VEX),(o128)
+2d: cvtps2pi Ppi,Wps | cvtss2si Gd/q,Wss (F3),(VEX),(o128) | cvtpd2pi Qpi,Wpd (66) | cvtsd2si Gd/q,Wsd (F2),(VEX),(o128)
+2e: ucomiss Vss,Wss (VEX),(o128) | ucomisd  Vsd,Wsd (66),(VEX),(o128)
+2f: comiss Vss,Wss (VEX),(o128) | comisd  Vsd,Wsd (66),(VEX),(o128)
+# 0x0f 0x30-0x3f
+30: WRMSR
+31: RDTSC
+32: RDMSR
+33: RDPMC
+34: SYSENTER
+35: SYSEXIT
+36:
+37: GETSEC
+38: escape # 3-byte escape 1
+39:
+3a: escape # 3-byte escape 2
+3b:
+3c:
+3d:
+3e:
+3f:
+# 0x0f 0x40-0x4f
+40: CMOVO Gv,Ev
+41: CMOVNO Gv,Ev
+42: CMOVB/C/NAE Gv,Ev
+43: CMOVAE/NB/NC Gv,Ev
+44: CMOVE/Z Gv,Ev
+45: CMOVNE/NZ Gv,Ev
+46: CMOVBE/NA Gv,Ev
+47: CMOVA/NBE Gv,Ev
+48: CMOVS Gv,Ev
+49: CMOVNS Gv,Ev
+4a: CMOVP/PE Gv,Ev
+4b: CMOVNP/PO Gv,Ev
+4c: CMOVL/NGE Gv,Ev
+4d: CMOVNL/GE Gv,Ev
+4e: CMOVLE/NG Gv,Ev
+4f: CMOVNLE/G Gv,Ev
+# 0x0f 0x50-0x5f
+50: movmskps Gd/q,Ups (VEX) | movmskpd Gd/q,Upd (66),(VEX)
+51: sqrtps Vps,Wps (VEX) | sqrtss Vss,Wss (F3),(VEX),(o128) | sqrtpd Vpd,Wpd (66),(VEX) | sqrtsd Vsd,Wsd (F2),(VEX),(o128)
+52: rsqrtps Vps,Wps (VEX) | rsqrtss Vss,Wss (F3),(VEX),(o128)
+53: rcpps Vps,Wps (VEX) | rcpss Vss,Wss (F3),(VEX),(o128)
+54: andps Vps,Wps (VEX) | andpd Vpd,Wpd (66),(VEX)
+55: andnps Vps,Wps (VEX) | andnpd Vpd,Wpd (66),(VEX)
+56: orps Vps,Wps (VEX) | orpd Vpd,Wpd (66),(VEX)
+57: xorps Vps,Wps (VEX) | xorpd Vpd,Wpd (66),(VEX)
+58: addps Vps,Wps (VEX) | addss Vss,Wss (F3),(VEX),(o128) | addpd Vpd,Wpd (66),(VEX) | addsd Vsd,Wsd (F2),(VEX),(o128)
+59: mulps Vps,Wps (VEX) | mulss Vss,Wss (F3),(VEX),(o128) | mulpd Vpd,Wpd (66),(VEX) | mulsd Vsd,Wsd (F2),(VEX),(o128)
+5a: cvtps2pd Vpd,Wps (VEX) | cvtss2sd Vsd,Wss (F3),(VEX),(o128) | cvtpd2ps Vps,Wpd (66),(VEX) | cvtsd2ss Vsd,Wsd (F2),(VEX),(o128)
+5b: cvtdq2ps Vps,Wdq (VEX) | cvtps2dq Vdq,Wps (66),(VEX) | cvttps2dq Vdq,Wps (F3),(VEX)
+5c: subps Vps,Wps (VEX) | subss Vss,Wss (F3),(VEX),(o128) | subpd Vpd,Wpd (66),(VEX) | subsd Vsd,Wsd (F2),(VEX),(o128)
+5d: minps Vps,Wps (VEX) | minss Vss,Wss (F3),(VEX),(o128) | minpd Vpd,Wpd (66),(VEX) | minsd Vsd,Wsd (F2),(VEX),(o128)
+5e: divps Vps,Wps (VEX) | divss Vss,Wss (F3),(VEX),(o128) | divpd Vpd,Wpd (66),(VEX) | divsd Vsd,Wsd (F2),(VEX),(o128)
+5f: maxps Vps,Wps (VEX) | maxss Vss,Wss (F3),(VEX),(o128) | maxpd Vpd,Wpd (66),(VEX) | maxsd Vsd,Wsd (F2),(VEX),(o128)
+# 0x0f 0x60-0x6f
+60: punpcklbw Pq,Qd | punpcklbw Vdq,Wdq (66),(VEX),(o128)
+61: punpcklwd Pq,Qd | punpcklwd Vdq,Wdq (66),(VEX),(o128)
+62: punpckldq Pq,Qd | punpckldq Vdq,Wdq (66),(VEX),(o128)
+63: packsswb Pq,Qq | packsswb Vdq,Wdq (66),(VEX),(o128)
+64: pcmpgtb Pq,Qq | pcmpgtb Vdq,Wdq (66),(VEX),(o128)
+65: pcmpgtw Pq,Qq | pcmpgtw Vdq,Wdq (66),(VEX),(o128)
+66: pcmpgtd Pq,Qq | pcmpgtd Vdq,Wdq (66),(VEX),(o128)
+67: packuswb Pq,Qq | packuswb Vdq,Wdq (66),(VEX),(o128)
+68: punpckhbw Pq,Qd | punpckhbw Vdq,Wdq (66),(VEX),(o128)
+69: punpckhwd Pq,Qd | punpckhwd Vdq,Wdq (66),(VEX),(o128)
+6a: punpckhdq Pq,Qd | punpckhdq Vdq,Wdq (66),(VEX),(o128)
+6b: packssdw Pq,Qd | packssdw Vdq,Wdq (66),(VEX),(o128)
+6c: punpcklqdq Vdq,Wdq (66),(VEX),(o128)
+6d: punpckhqdq Vdq,Wdq (66),(VEX),(o128)
+6e: movd/q/ Pd,Ed/q | movd/q Vdq,Ed/q (66),(VEX),(o128)
+6f: movq Pq,Qq | movdqa Vdq,Wdq (66),(VEX) | movdqu Vdq,Wdq (F3),(VEX)
+# 0x0f 0x70-0x7f
+70: pshufw Pq,Qq,Ib | pshufd Vdq,Wdq,Ib (66),(VEX),(o128) | pshufhw Vdq,Wdq,Ib (F3),(VEX),(o128) | pshuflw VdqWdq,Ib (F2),(VEX),(o128)
+71: Grp12 (1A)
+72: Grp13 (1A)
+73: Grp14 (1A)
+74: pcmpeqb Pq,Qq | pcmpeqb Vdq,Wdq (66),(VEX),(o128)
+75: pcmpeqw Pq,Qq | pcmpeqw Vdq,Wdq (66),(VEX),(o128)
+76: pcmpeqd Pq,Qq | pcmpeqd Vdq,Wdq (66),(VEX),(o128)
+77: emms/vzeroupper/vzeroall (VEX)
+78: VMREAD Ed/q,Gd/q
+79: VMWRITE Gd/q,Ed/q
+7a:
+7b:
+7c: haddps Vps,Wps (F2),(VEX) | haddpd Vpd,Wpd (66),(VEX)
+7d: hsubps Vps,Wps (F2),(VEX) | hsubpd Vpd,Wpd (66),(VEX)
+7e: movd/q Ed/q,Pd | movd/q Ed/q,Vdq (66),(VEX),(o128) | movq Vq,Wq (F3),(VEX),(o128)
+7f: movq Qq,Pq | movdqa Wdq,Vdq (66),(VEX) | movdqu Wdq,Vdq (F3),(VEX)
+# 0x0f 0x80-0x8f
+80: JO Jz (f64)
+81: JNO Jz (f64)
+82: JB/JNAE/JC Jz (f64)
+83: JNB/JAE/JNC Jz (f64)
+84: JZ/JE Jz (f64)
+85: JNZ/JNE Jz (f64)
+86: JBE/JNA Jz (f64)
+87: JNBE/JA Jz (f64)
+88: JS Jz (f64)
+89: JNS Jz (f64)
+8a: JP/JPE Jz (f64)
+8b: JNP/JPO Jz (f64)
+8c: JL/JNGE Jz (f64)
+8d: JNL/JGE Jz (f64)
+8e: JLE/JNG Jz (f64)
+8f: JNLE/JG Jz (f64)
+# 0x0f 0x90-0x9f
+90: SETO Eb
+91: SETNO Eb
+92: SETB/C/NAE Eb
+93: SETAE/NB/NC Eb
+94: SETE/Z Eb
+95: SETNE/NZ Eb
+96: SETBE/NA Eb
+97: SETA/NBE Eb
+98: SETS Eb
+99: SETNS Eb
+9a: SETP/PE Eb
+9b: SETNP/PO Eb
+9c: SETL/NGE Eb
+9d: SETNL/GE Eb
+9e: SETLE/NG Eb
+9f: SETNLE/G Eb
+# 0x0f 0xa0-0xaf
+a0: PUSH FS (d64)
+a1: POP FS (d64)
+a2: CPUID
+a3: BT Ev,Gv
+a4: SHLD Ev,Gv,Ib
+a5: SHLD Ev,Gv,CL
+a6: GrpPDLK
+a7: GrpRNG
+a8: PUSH GS (d64)
+a9: POP GS (d64)
+aa: RSM
+ab: BTS Ev,Gv
+ac: SHRD Ev,Gv,Ib
+ad: SHRD Ev,Gv,CL
+ae: Grp15 (1A),(1C)
+af: IMUL Gv,Ev
+# 0x0f 0xb0-0xbf
+b0: CMPXCHG Eb,Gb
+b1: CMPXCHG Ev,Gv
+b2: LSS Gv,Mp
+b3: BTR Ev,Gv
+b4: LFS Gv,Mp
+b5: LGS Gv,Mp
+b6: MOVZX Gv,Eb
+b7: MOVZX Gv,Ew
+b8: JMPE | POPCNT Gv,Ev (F3)
+b9: Grp10 (1A)
+ba: Grp8 Ev,Ib (1A)
+bb: BTC Ev,Gv
+bc: BSF Gv,Ev
+bd: BSR Gv,Ev
+be: MOVSX Gv,Eb
+bf: MOVSX Gv,Ew
+# 0x0f 0xc0-0xcf
+c0: XADD Eb,Gb
+c1: XADD Ev,Gv
+c2: cmpps Vps,Wps,Ib (VEX) | cmpss Vss,Wss,Ib (F3),(VEX),(o128) | cmppd Vpd,Wpd,Ib (66),(VEX) | cmpsd Vsd,Wsd,Ib (F2),(VEX)
+c3: movnti Md/q,Gd/q
+c4: pinsrw Pq,Rd/q/Mw,Ib | pinsrw Vdq,Rd/q/Mw,Ib (66),(VEX),(o128)
+c5: pextrw Gd,Nq,Ib | pextrw Gd,Udq,Ib (66),(VEX),(o128)
+c6: shufps Vps,Wps,Ib (VEX) | shufpd Vpd,Wpd,Ib (66),(VEX)
+c7: Grp9 (1A)
+c8: BSWAP RAX/EAX/R8/R8D
+c9: BSWAP RCX/ECX/R9/R9D
+ca: BSWAP RDX/EDX/R10/R10D
+cb: BSWAP RBX/EBX/R11/R11D
+cc: BSWAP RSP/ESP/R12/R12D
+cd: BSWAP RBP/EBP/R13/R13D
+ce: BSWAP RSI/ESI/R14/R14D
+cf: BSWAP RDI/EDI/R15/R15D
+# 0x0f 0xd0-0xdf
+d0: addsubps Vps,Wps (F2),(VEX) | addsubpd Vpd,Wpd (66),(VEX)
+d1: psrlw Pq,Qq | psrlw Vdq,Wdq (66),(VEX),(o128)
+d2: psrld Pq,Qq | psrld Vdq,Wdq (66),(VEX),(o128)
+d3: psrlq Pq,Qq | psrlq Vdq,Wdq (66),(VEX),(o128)
+d4: paddq Pq,Qq | paddq Vdq,Wdq (66),(VEX),(o128)
+d5: pmullw Pq,Qq | pmullw Vdq,Wdq (66),(VEX),(o128)
+d6: movq Wq,Vq (66),(VEX),(o128) | movq2dq Vdq,Nq (F3) | movdq2q Pq,Uq (F2)
+d7: pmovmskb Gd,Nq | pmovmskb Gd,Udq (66),(VEX),(o128)
+d8: psubusb Pq,Qq | psubusb Vdq,Wdq (66),(VEX),(o128)
+d9: psubusw Pq,Qq | psubusw Vdq,Wdq (66),(VEX),(o128)
+da: pminub Pq,Qq | pminub Vdq,Wdq (66),(VEX),(o128)
+db: pand Pq,Qq | pand Vdq,Wdq (66),(VEX),(o128)
+dc: paddusb Pq,Qq | paddusb Vdq,Wdq (66),(VEX),(o128)
+dd: paddusw Pq,Qq | paddusw Vdq,Wdq (66),(VEX),(o128)
+de: pmaxub Pq,Qq | pmaxub Vdq,Wdq (66),(VEX),(o128)
+df: pandn Pq,Qq | pandn Vdq,Wdq (66),(VEX),(o128)
+# 0x0f 0xe0-0xef
+e0: pavgb Pq,Qq | pavgb Vdq,Wdq (66),(VEX),(o128)
+e1: psraw Pq,Qq | psraw Vdq,Wdq (66),(VEX),(o128)
+e2: psrad Pq,Qq | psrad Vdq,Wdq (66),(VEX),(o128)
+e3: pavgw Pq,Qq | pavgw Vdq,Wdq (66),(VEX),(o128)
+e4: pmulhuw Pq,Qq | pmulhuw Vdq,Wdq (66),(VEX),(o128)
+e5: pmulhw Pq,Qq | pmulhw Vdq,Wdq (66),(VEX),(o128)
+e6: cvtpd2dq Vdq,Wpd (F2),(VEX) | cvttpd2dq Vdq,Wpd (66),(VEX) | cvtdq2pd Vpd,Wdq (F3),(VEX)
+e7: movntq Mq,Pq | movntdq Mdq,Vdq (66),(VEX)
+e8: psubsb Pq,Qq | psubsb Vdq,Wdq (66),(VEX),(o128)
+e9: psubsw Pq,Qq | psubsw Vdq,Wdq (66),(VEX),(o128)
+ea: pminsw Pq,Qq | pminsw Vdq,Wdq (66),(VEX),(o128)
+eb: por Pq,Qq | por Vdq,Wdq (66),(VEX),(o128)
+ec: paddsb Pq,Qq | paddsb Vdq,Wdq (66),(VEX),(o128)
+ed: paddsw Pq,Qq | paddsw Vdq,Wdq (66),(VEX),(o128)
+ee: pmaxsw Pq,Qq | pmaxsw Vdq,Wdq (66),(VEX),(o128)
+ef: pxor Pq,Qq | pxor Vdq,Wdq (66),(VEX),(o128)
+# 0x0f 0xf0-0xff
+f0: lddqu Vdq,Mdq (F2),(VEX)
+f1: psllw Pq,Qq | psllw Vdq,Wdq (66),(VEX),(o128)
+f2: pslld Pq,Qq | pslld Vdq,Wdq (66),(VEX),(o128)
+f3: psllq Pq,Qq | psllq Vdq,Wdq (66),(VEX),(o128)
+f4: pmuludq Pq,Qq | pmuludq Vdq,Wdq (66),(VEX),(o128)
+f5: pmaddwd Pq,Qq | pmaddwd Vdq,Wdq (66),(VEX),(o128)
+f6: psadbw Pq,Qq | psadbw Vdq,Wdq (66),(VEX),(o128)
+f7: maskmovq Pq,Nq | maskmovdqu Vdq,Udq (66),(VEX),(o128)
+f8: psubb Pq,Qq | psubb Vdq,Wdq (66),(VEX),(o128)
+f9: psubw Pq,Qq | psubw Vdq,Wdq (66),(VEX),(o128)
+fa: psubd Pq,Qq | psubd Vdq,Wdq (66),(VEX),(o128)
+fb: psubq Pq,Qq | psubq Vdq,Wdq (66),(VEX),(o128)
+fc: paddb Pq,Qq | paddb Vdq,Wdq (66),(VEX),(o128)
+fd: paddw Pq,Qq | paddw Vdq,Wdq (66),(VEX),(o128)
+fe: paddd Pq,Qq | paddd Vdq,Wdq (66),(VEX),(o128)
+ff:
+EndTable
+
+Table: 3-byte opcode 1 (0x0f 0x38)
+Referrer: 3-byte escape 1
+AVXcode: 2
+# 0x0f 0x38 0x00-0x0f
+00: pshufb Pq,Qq | pshufb Vdq,Wdq (66),(VEX),(o128)
+01: phaddw Pq,Qq | phaddw Vdq,Wdq (66),(VEX),(o128)
+02: phaddd Pq,Qq | phaddd Vdq,Wdq (66),(VEX),(o128)
+03: phaddsw Pq,Qq | phaddsw Vdq,Wdq (66),(VEX),(o128)
+04: pmaddubsw Pq,Qq | pmaddubsw Vdq,Wdq (66),(VEX),(o128)
+05: phsubw Pq,Qq | phsubw Vdq,Wdq (66),(VEX),(o128)
+06: phsubd Pq,Qq | phsubd Vdq,Wdq (66),(VEX),(o128)
+07: phsubsw Pq,Qq | phsubsw Vdq,Wdq (66),(VEX),(o128)
+08: psignb Pq,Qq | psignb Vdq,Wdq (66),(VEX),(o128)
+09: psignw Pq,Qq | psignw Vdq,Wdq (66),(VEX),(o128)
+0a: psignd Pq,Qq | psignd Vdq,Wdq (66),(VEX),(o128)
+0b: pmulhrsw Pq,Qq | pmulhrsw Vdq,Wdq (66),(VEX),(o128)
+0c: Vpermilps /r (66),(oVEX)
+0d: Vpermilpd /r (66),(oVEX)
+0e: vtestps /r (66),(oVEX)
+0f: vtestpd /r (66),(oVEX)
+# 0x0f 0x38 0x10-0x1f
+10: pblendvb Vdq,Wdq (66)
+11:
+12:
+13:
+14: blendvps Vdq,Wdq (66)
+15: blendvpd Vdq,Wdq (66)
+16:
+17: ptest Vdq,Wdq (66),(VEX)
+18: vbroadcastss /r (66),(oVEX)
+19: vbroadcastsd /r (66),(oVEX),(o256)
+1a: vbroadcastf128 /r (66),(oVEX),(o256)
+1b:
+1c: pabsb Pq,Qq | pabsb Vdq,Wdq (66),(VEX),(o128)
+1d: pabsw Pq,Qq | pabsw Vdq,Wdq (66),(VEX),(o128)
+1e: pabsd Pq,Qq | pabsd Vdq,Wdq (66),(VEX),(o128)
+1f:
+# 0x0f 0x38 0x20-0x2f
+20: pmovsxbw Vdq,Udq/Mq (66),(VEX),(o128)
+21: pmovsxbd Vdq,Udq/Md (66),(VEX),(o128)
+22: pmovsxbq Vdq,Udq/Mw (66),(VEX),(o128)
+23: pmovsxwd Vdq,Udq/Mq (66),(VEX),(o128)
+24: pmovsxwq Vdq,Udq/Md (66),(VEX),(o128)
+25: pmovsxdq Vdq,Udq/Mq (66),(VEX),(o128)
+26:
+27:
+28: pmuldq Vdq,Wdq (66),(VEX),(o128)
+29: pcmpeqq Vdq,Wdq (66),(VEX),(o128)
+2a: movntdqa Vdq,Mdq (66),(VEX),(o128)
+2b: packusdw Vdq,Wdq (66),(VEX),(o128)
+2c: vmaskmovps(ld) /r (66),(oVEX)
+2d: vmaskmovpd(ld) /r (66),(oVEX)
+2e: vmaskmovps(st) /r (66),(oVEX)
+2f: vmaskmovpd(st) /r (66),(oVEX)
+# 0x0f 0x38 0x30-0x3f
+30: pmovzxbw Vdq,Udq/Mq (66),(VEX),(o128)
+31: pmovzxbd Vdq,Udq/Md (66),(VEX),(o128)
+32: pmovzxbq Vdq,Udq/Mw (66),(VEX),(o128)
+33: pmovzxwd Vdq,Udq/Mq (66),(VEX),(o128)
+34: pmovzxwq Vdq,Udq/Md (66),(VEX),(o128)
+35: pmovzxdq Vdq,Udq/Mq (66),(VEX),(o128)
+36:
+37: pcmpgtq Vdq,Wdq (66),(VEX),(o128)
+38: pminsb Vdq,Wdq (66),(VEX),(o128)
+39: pminsd Vdq,Wdq (66),(VEX),(o128)
+3a: pminuw Vdq,Wdq (66),(VEX),(o128)
+3b: pminud Vdq,Wdq (66),(VEX),(o128)
+3c: pmaxsb Vdq,Wdq (66),(VEX),(o128)
+3d: pmaxsd Vdq,Wdq (66),(VEX),(o128)
+3e: pmaxuw Vdq,Wdq (66),(VEX),(o128)
+3f: pmaxud Vdq,Wdq (66),(VEX),(o128)
+# 0x0f 0x38 0x40-0x8f
+40: pmulld Vdq,Wdq (66),(VEX),(o128)
+41: phminposuw Vdq,Wdq (66),(VEX),(o128)
+80: INVEPT Gd/q,Mdq (66)
+81: INVPID Gd/q,Mdq (66)
+# 0x0f 0x38 0x90-0xbf (FMA)
+96: vfmaddsub132pd/ps /r (66),(VEX)
+97: vfmsubadd132pd/ps /r (66),(VEX)
+98: vfmadd132pd/ps /r (66),(VEX)
+99: vfmadd132sd/ss /r (66),(VEX),(o128)
+9a: vfmsub132pd/ps /r (66),(VEX)
+9b: vfmsub132sd/ss /r (66),(VEX),(o128)
+9c: vfnmadd132pd/ps /r (66),(VEX)
+9d: vfnmadd132sd/ss /r (66),(VEX),(o128)
+9e: vfnmsub132pd/ps /r (66),(VEX)
+9f: vfnmsub132sd/ss /r (66),(VEX),(o128)
+a6: vfmaddsub213pd/ps /r (66),(VEX)
+a7: vfmsubadd213pd/ps /r (66),(VEX)
+a8: vfmadd213pd/ps /r (66),(VEX)
+a9: vfmadd213sd/ss /r (66),(VEX),(o128)
+aa: vfmsub213pd/ps /r (66),(VEX)
+ab: vfmsub213sd/ss /r (66),(VEX),(o128)
+ac: vfnmadd213pd/ps /r (66),(VEX)
+ad: vfnmadd213sd/ss /r (66),(VEX),(o128)
+ae: vfnmsub213pd/ps /r (66),(VEX)
+af: vfnmsub213sd/ss /r (66),(VEX),(o128)
+b6: vfmaddsub231pd/ps /r (66),(VEX)
+b7: vfmsubadd231pd/ps /r (66),(VEX)
+b8: vfmadd231pd/ps /r (66),(VEX)
+b9: vfmadd231sd/ss /r (66),(VEX),(o128)
+ba: vfmsub231pd/ps /r (66),(VEX)
+bb: vfmsub231sd/ss /r (66),(VEX),(o128)
+bc: vfnmadd231pd/ps /r (66),(VEX)
+bd: vfnmadd231sd/ss /r (66),(VEX),(o128)
+be: vfnmsub231pd/ps /r (66),(VEX)
+bf: vfnmsub231sd/ss /r (66),(VEX),(o128)
+# 0x0f 0x38 0xc0-0xff
+db: aesimc Vdq,Wdq (66),(VEX),(o128)
+dc: aesenc Vdq,Wdq (66),(VEX),(o128)
+dd: aesenclast Vdq,Wdq (66),(VEX),(o128)
+de: aesdec Vdq,Wdq (66),(VEX),(o128)
+df: aesdeclast Vdq,Wdq (66),(VEX),(o128)
+f0: MOVBE Gv,Mv | CRC32 Gd,Eb (F2)
+f1: MOVBE Mv,Gv | CRC32 Gd,Ev (F2)
+EndTable
+
+Table: 3-byte opcode 2 (0x0f 0x3a)
+Referrer: 3-byte escape 2
+AVXcode: 3
+# 0x0f 0x3a 0x00-0xff
+04: vpermilps /r,Ib (66),(oVEX)
+05: vpermilpd /r,Ib (66),(oVEX)
+06: vperm2f128 /r,Ib (66),(oVEX),(o256)
+08: roundps Vdq,Wdq,Ib (66),(VEX)
+09: roundpd Vdq,Wdq,Ib (66),(VEX)
+0a: roundss Vss,Wss,Ib (66),(VEX),(o128)
+0b: roundsd Vsd,Wsd,Ib (66),(VEX),(o128)
+0c: blendps Vdq,Wdq,Ib (66),(VEX)
+0d: blendpd Vdq,Wdq,Ib (66),(VEX)
+0e: pblendw Vdq,Wdq,Ib (66),(VEX),(o128)
+0f: palignr Pq,Qq,Ib | palignr Vdq,Wdq,Ib (66),(VEX),(o128)
+14: pextrb Rd/Mb,Vdq,Ib (66),(VEX),(o128)
+15: pextrw Rd/Mw,Vdq,Ib (66),(VEX),(o128)
+16: pextrd/pextrq Ed/q,Vdq,Ib (66),(VEX),(o128)
+17: extractps Ed,Vdq,Ib (66),(VEX),(o128)
+18: vinsertf128 /r,Ib (66),(oVEX),(o256)
+19: vextractf128 /r,Ib (66),(oVEX),(o256)
+20: pinsrb Vdq,Rd/q/Mb,Ib (66),(VEX),(o128)
+21: insertps Vdq,Udq/Md,Ib (66),(VEX),(o128)
+22: pinsrd/pinsrq Vdq,Ed/q,Ib (66),(VEX),(o128)
+40: dpps Vdq,Wdq,Ib (66),(VEX)
+41: dppd Vdq,Wdq,Ib (66),(VEX),(o128)
+42: mpsadbw Vdq,Wdq,Ib (66),(VEX),(o128)
+44: pclmulq Vdq,Wdq,Ib (66),(VEX),(o128)
+4a: vblendvps /r,Ib (66),(oVEX)
+4b: vblendvpd /r,Ib (66),(oVEX)
+4c: vpblendvb /r,Ib (66),(oVEX),(o128)
+60: pcmpestrm Vdq,Wdq,Ib (66),(VEX),(o128)
+61: pcmpestri Vdq,Wdq,Ib (66),(VEX),(o128)
+62: pcmpistrm Vdq,Wdq,Ib (66),(VEX),(o128)
+63: pcmpistri Vdq,Wdq,Ib (66),(VEX),(o128)
+df: aeskeygenassist Vdq,Wdq,Ib (66),(VEX),(o128)
+EndTable
+
+GrpTable: Grp1
+0: ADD
+1: OR
+2: ADC
+3: SBB
+4: AND
+5: SUB
+6: XOR
+7: CMP
+EndTable
+
+GrpTable: Grp1A
+0: POP
+EndTable
+
+GrpTable: Grp2
+0: ROL
+1: ROR
+2: RCL
+3: RCR
+4: SHL/SAL
+5: SHR
+6:
+7: SAR
+EndTable
+
+GrpTable: Grp3_1
+0: TEST Eb,Ib
+1:
+2: NOT Eb
+3: NEG Eb
+4: MUL AL,Eb
+5: IMUL AL,Eb
+6: DIV AL,Eb
+7: IDIV AL,Eb
+EndTable
+
+GrpTable: Grp3_2
+0: TEST Ev,Iz
+1:
+2: NOT Ev
+3: NEG Ev
+4: MUL rAX,Ev
+5: IMUL rAX,Ev
+6: DIV rAX,Ev
+7: IDIV rAX,Ev
+EndTable
+
+GrpTable: Grp4
+0: INC Eb
+1: DEC Eb
+EndTable
+
+GrpTable: Grp5
+0: INC Ev
+1: DEC Ev
+2: CALLN Ev (f64)
+3: CALLF Ep
+4: JMPN Ev (f64)
+5: JMPF Ep
+6: PUSH Ev (d64)
+7:
+EndTable
+
+GrpTable: Grp6
+0: SLDT Rv/Mw
+1: STR Rv/Mw
+2: LLDT Ew
+3: LTR Ew
+4: VERR Ew
+5: VERW Ew
+EndTable
+
+GrpTable: Grp7
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B)
+3: LIDT Ms
+4: SMSW Mw/Rv
+5:
+6: LMSW Ew
+7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
+EndTable
+
+GrpTable: Grp8
+4: BT
+5: BTS
+6: BTR
+7: BTC
+EndTable
+
+GrpTable: Grp9
+1: CMPXCHG8B/16B Mq/Mdq
+6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3)
+7: VMPTRST Mq
+EndTable
+
+GrpTable: Grp10
+EndTable
+
+GrpTable: Grp11
+0: MOV
+EndTable
+
+GrpTable: Grp12
+2: psrlw Nq,Ib (11B) | psrlw Udq,Ib (66),(11B),(VEX),(o128)
+4: psraw Nq,Ib (11B) | psraw Udq,Ib (66),(11B),(VEX),(o128)
+6: psllw Nq,Ib (11B) | psllw Udq,Ib (66),(11B),(VEX),(o128)
+EndTable
+
+GrpTable: Grp13
+2: psrld Nq,Ib (11B) | psrld Udq,Ib (66),(11B),(VEX),(o128)
+4: psrad Nq,Ib (11B) | psrad Udq,Ib (66),(11B),(VEX),(o128)
+6: pslld Nq,Ib (11B) | pslld Udq,Ib (66),(11B),(VEX),(o128)
+EndTable
+
+GrpTable: Grp14
+2: psrlq Nq,Ib (11B) | psrlq Udq,Ib (66),(11B),(VEX),(o128)
+3: psrldq Udq,Ib (66),(11B),(VEX),(o128)
+6: psllq Nq,Ib (11B) | psllq Udq,Ib (66),(11B),(VEX),(o128)
+7: pslldq Udq,Ib (66),(11B),(VEX),(o128)
+EndTable
+
+GrpTable: Grp15
+0: fxsave
+1: fxstor
+2: ldmxcsr (VEX)
+3: stmxcsr (VEX)
+4: XSAVE
+5: XRSTOR | lfence (11B)
+6: mfence (11B)
+7: clflush | sfence (11B)
+EndTable
+
+GrpTable: Grp16
+0: prefetch NTA
+1: prefetch T0
+2: prefetch T1
+3: prefetch T2
+EndTable
+
+# AMD's Prefetch Group
+GrpTable: GrpP
+0: PREFETCH
+1: PREFETCHW
+EndTable
+
+GrpTable: GrpPDLK
+0: MONTMUL
+1: XSHA1
+2: XSHA2
+EndTable
+
+GrpTable: GrpRNG
+0: xstore-rng
+1: xcrypt-ecb
+2: xcrypt-cbc
+4: xcrypt-cfb
+5: xcrypt-ofb
+EndTable
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index 61b41ca..d0474ad 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -35,34 +35,3 @@
 
 	return 0;
 }
-
-#ifdef CONFIG_X86_64
-/*
- * Need to defined our own search_extable on X86_64 to work around
- * a B stepping K8 bug.
- */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	/* B stepping K8 bug */
-	if ((value >> 32) == 0)
-		value |= 0xffffffffUL << 32;
-
-	while (first <= last) {
-		const struct exception_table_entry *mid;
-		long diff;
-
-		mid = (last - first) / 2 + first;
-		diff = mid->insn - value;
-		if (diff == 0)
-			return mid;
-		else if (diff < 0)
-			first = mid+1;
-		else
-			last = mid-1;
-	}
-	return NULL;
-}
-#endif
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index f4cee90..f627779 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -38,7 +38,8 @@
  * Returns 0 if mmiotrace is disabled, or if the fault is not
  * handled by mmiotrace:
  */
-static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr)
+static inline int __kprobes
+kmmio_fault(struct pt_regs *regs, unsigned long addr)
 {
 	if (unlikely(is_kmmio_active()))
 		if (kmmio_handler(regs, addr) == 1)
@@ -46,7 +47,7 @@
 	return 0;
 }
 
-static inline int notify_page_fault(struct pt_regs *regs)
+static inline int __kprobes notify_page_fault(struct pt_regs *regs)
 {
 	int ret = 0;
 
@@ -240,7 +241,7 @@
  *
  *   Handle a fault on the vmalloc or module mapping area
  */
-static noinline int vmalloc_fault(unsigned long address)
+static noinline __kprobes int vmalloc_fault(unsigned long address)
 {
 	unsigned long pgd_paddr;
 	pmd_t *pmd_k;
@@ -357,7 +358,7 @@
  *
  * This assumes no large pages in there.
  */
-static noinline int vmalloc_fault(unsigned long address)
+static noinline __kprobes int vmalloc_fault(unsigned long address)
 {
 	pgd_t *pgd, *pgd_ref;
 	pud_t *pud, *pud_ref;
@@ -658,7 +659,7 @@
 	show_fault_oops(regs, error_code, address);
 
 	stackend = end_of_stack(tsk);
-	if (*stackend != STACK_END_MAGIC)
+	if (tsk != &init_task && *stackend != STACK_END_MAGIC)
 		printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
 
 	tsk->thread.cr2		= address;
@@ -860,7 +861,7 @@
  * There are no security implications to leaving a stale TLB when
  * increasing the permissions on a page.
  */
-static noinline int
+static noinline __kprobes int
 spurious_fault(unsigned long error_code, unsigned long address)
 {
 	pgd_t *pgd;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 73ffd55..d406c52 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -146,10 +146,6 @@
 	use_gbpages = direct_gbpages;
 #endif
 
-	set_nx();
-	if (nx_enabled)
-		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
-
 	/* Enable PSE if available */
 	if (cpu_has_pse)
 		set_in_cr4(X86_CR4_PSE);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 30938c1..c973f8e 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -412,7 +412,7 @@
 	pkmap_page_table = pte;
 }
 
-static void __init add_one_highpage_init(struct page *page, int pfn)
+static void __init add_one_highpage_init(struct page *page)
 {
 	ClearPageReserved(page);
 	init_page_count(page);
@@ -445,7 +445,7 @@
 		if (!pfn_valid(node_pfn))
 			continue;
 		page = pfn_to_page(node_pfn);
-		add_one_highpage_init(page, node_pfn);
+		add_one_highpage_init(page);
 	}
 
 	return 0;
@@ -703,8 +703,8 @@
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init initmem_init(unsigned long start_pfn,
-				  unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8)
 {
 #ifdef CONFIG_HIGHMEM
 	highstart_pfn = highend_pfn = max_pfn;
@@ -997,7 +997,7 @@
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
 
-static int kernel_set_to_readonly;
+int kernel_set_to_readonly __read_mostly;
 
 void set_kernel_text_rw(void)
 {
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5a4398a..5198b9b 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -568,7 +568,8 @@
 }
 
 #ifndef CONFIG_NUMA
-void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8)
 {
 	unsigned long bootmap_size, bootmap;
 
@@ -694,12 +695,12 @@
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
 
-static int kernel_set_to_readonly;
+int kernel_set_to_readonly;
 
 void set_kernel_text_rw(void)
 {
-	unsigned long start = PFN_ALIGN(_stext);
-	unsigned long end = PFN_ALIGN(__start_rodata);
+	unsigned long start = PFN_ALIGN(_text);
+	unsigned long end = PFN_ALIGN(__stop___ex_table);
 
 	if (!kernel_set_to_readonly)
 		return;
@@ -707,13 +708,18 @@
 	pr_debug("Set kernel text: %lx - %lx for read write\n",
 		 start, end);
 
+	/*
+	 * Make the kernel identity mapping for text RW. Kernel text
+	 * mapping will always be RO. Refer to the comment in
+	 * static_protections() in pageattr.c
+	 */
 	set_memory_rw(start, (end - start) >> PAGE_SHIFT);
 }
 
 void set_kernel_text_ro(void)
 {
-	unsigned long start = PFN_ALIGN(_stext);
-	unsigned long end = PFN_ALIGN(__start_rodata);
+	unsigned long start = PFN_ALIGN(_text);
+	unsigned long end = PFN_ALIGN(__stop___ex_table);
 
 	if (!kernel_set_to_readonly)
 		return;
@@ -721,14 +727,21 @@
 	pr_debug("Set kernel text: %lx - %lx for read only\n",
 		 start, end);
 
+	/*
+	 * Set the kernel identity mapping for text RO.
+	 */
 	set_memory_ro(start, (end - start) >> PAGE_SHIFT);
 }
 
 void mark_rodata_ro(void)
 {
-	unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata);
+	unsigned long start = PFN_ALIGN(_text);
 	unsigned long rodata_start =
 		((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK;
+	unsigned long end = (unsigned long) &__end_rodata_hpage_align;
+	unsigned long text_end = PAGE_ALIGN((unsigned long) &__stop___ex_table);
+	unsigned long rodata_end = PAGE_ALIGN((unsigned long) &__end_rodata);
+	unsigned long data_start = (unsigned long) &_sdata;
 
 	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
 	       (end - start) >> 10);
@@ -751,6 +764,14 @@
 	printk(KERN_INFO "Testing CPA: again\n");
 	set_memory_ro(start, (end-start) >> PAGE_SHIFT);
 #endif
+
+	free_init_pages("unused kernel memory",
+			(unsigned long) page_address(virt_to_page(text_end)),
+			(unsigned long)
+				 page_address(virt_to_page(rodata_start)));
+	free_init_pages("unused kernel memory",
+			(unsigned long) page_address(virt_to_page(rodata_end)),
+			(unsigned long) page_address(virt_to_page(data_start)));
 }
 
 #endif
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 2feb9bd..c246d25 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -281,30 +281,6 @@
 }
 EXPORT_SYMBOL(ioremap_cache);
 
-static void __iomem *ioremap_default(resource_size_t phys_addr,
-					unsigned long size)
-{
-	unsigned long flags;
-	void __iomem *ret;
-	int err;
-
-	/*
-	 * - WB for WB-able memory and no other conflicting mappings
-	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
-	 * - Inherit from confliting mappings otherwise
-	 */
-	err = reserve_memtype(phys_addr, phys_addr + size,
-				_PAGE_CACHE_WB, &flags);
-	if (err < 0)
-		return NULL;
-
-	ret = __ioremap_caller(phys_addr, size, flags,
-			       __builtin_return_address(0));
-
-	free_memtype(phys_addr, phys_addr + size);
-	return ret;
-}
-
 void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
 				unsigned long prot_val)
 {
@@ -380,7 +356,7 @@
 	if (page_is_ram(start >> PAGE_SHIFT))
 		return __va(phys);
 
-	addr = (void __force *)ioremap_default(start, PAGE_SIZE);
+	addr = (void __force *)ioremap_cache(start, PAGE_SIZE);
 	if (addr)
 		addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK));
 
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 268f825..970ed57 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -24,6 +24,9 @@
 #include <asm/apic.h>
 #include <asm/k8.h>
 
+static struct bootnode __initdata nodes[8];
+static nodemask_t __initdata nodes_parsed = NODE_MASK_NONE;
+
 static __init int find_northbridge(void)
 {
 	int num;
@@ -54,18 +57,6 @@
 	 * need to get boot_cpu_id so can use that to create apicid_to_node
 	 * in k8_scan_nodes()
 	 */
-	/*
-	 * Find possible boot-time SMP configuration:
-	 */
-#ifdef CONFIG_X86_MPPARSE
-	early_find_smp_config();
-#endif
-#ifdef CONFIG_ACPI
-	/*
-	 * Read APIC information from ACPI tables.
-	 */
-	early_acpi_boot_init();
-#endif
 #ifdef CONFIG_X86_MPPARSE
 	/*
 	 * get boot-time SMP configuration:
@@ -76,12 +67,26 @@
 	early_init_lapic_mapping();
 }
 
-int __init k8_scan_nodes(unsigned long start, unsigned long end)
+int __init k8_get_nodes(struct bootnode *physnodes)
 {
-	unsigned numnodes, cores, bits, apicid_base;
+	int i;
+	int ret = 0;
+
+	for_each_node_mask(i, nodes_parsed) {
+		physnodes[ret].start = nodes[i].start;
+		physnodes[ret].end = nodes[i].end;
+		ret++;
+	}
+	return ret;
+}
+
+int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn)
+{
+	unsigned long start = PFN_PHYS(start_pfn);
+	unsigned long end = PFN_PHYS(end_pfn);
+	unsigned numnodes;
 	unsigned long prevbase;
-	struct bootnode nodes[8];
-	int i, j, nb, found = 0;
+	int i, nb, found = 0;
 	u32 nodeid, reg;
 
 	if (!early_pci_allowed())
@@ -91,16 +96,15 @@
 	if (nb < 0)
 		return nb;
 
-	printk(KERN_INFO "Scanning NUMA topology in Northbridge %d\n", nb);
+	pr_info("Scanning NUMA topology in Northbridge %d\n", nb);
 
 	reg = read_pci_config(0, nb, 0, 0x60);
 	numnodes = ((reg >> 4) & 0xF) + 1;
 	if (numnodes <= 1)
 		return -1;
 
-	printk(KERN_INFO "Number of nodes %d\n", numnodes);
+	pr_info("Number of physical nodes %d\n", numnodes);
 
-	memset(&nodes, 0, sizeof(nodes));
 	prevbase = 0;
 	for (i = 0; i < 8; i++) {
 		unsigned long base, limit;
@@ -111,28 +115,28 @@
 		nodeid = limit & 7;
 		if ((base & 3) == 0) {
 			if (i < numnodes)
-				printk("Skipping disabled node %d\n", i);
+				pr_info("Skipping disabled node %d\n", i);
 			continue;
 		}
 		if (nodeid >= numnodes) {
-			printk("Ignoring excess node %d (%lx:%lx)\n", nodeid,
-			       base, limit);
+			pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid,
+				base, limit);
 			continue;
 		}
 
 		if (!limit) {
-			printk(KERN_INFO "Skipping node entry %d (base %lx)\n",
-			       i, base);
+			pr_info("Skipping node entry %d (base %lx)\n",
+				i, base);
 			continue;
 		}
 		if ((base >> 8) & 3 || (limit >> 8) & 3) {
-			printk(KERN_ERR "Node %d using interleaving mode %lx/%lx\n",
-			       nodeid, (base>>8)&3, (limit>>8) & 3);
+			pr_err("Node %d using interleaving mode %lx/%lx\n",
+			       nodeid, (base >> 8) & 3, (limit >> 8) & 3);
 			return -1;
 		}
-		if (node_isset(nodeid, node_possible_map)) {
-			printk(KERN_INFO "Node %d already present. Skipping\n",
-			       nodeid);
+		if (node_isset(nodeid, nodes_parsed)) {
+			pr_info("Node %d already present, skipping\n",
+				nodeid);
 			continue;
 		}
 
@@ -141,8 +145,8 @@
 		limit |= (1<<24)-1;
 		limit++;
 
-		if (limit > max_pfn << PAGE_SHIFT)
-			limit = max_pfn << PAGE_SHIFT;
+		if (limit > end)
+			limit = end;
 		if (limit <= base)
 			continue;
 
@@ -154,24 +158,24 @@
 		if (limit > end)
 			limit = end;
 		if (limit == base) {
-			printk(KERN_ERR "Empty node %d\n", nodeid);
+			pr_err("Empty node %d\n", nodeid);
 			continue;
 		}
 		if (limit < base) {
-			printk(KERN_ERR "Node %d bogus settings %lx-%lx.\n",
+			pr_err("Node %d bogus settings %lx-%lx.\n",
 			       nodeid, base, limit);
 			continue;
 		}
 
 		/* Could sort here, but pun for now. Should not happen anyroads. */
 		if (prevbase > base) {
-			printk(KERN_ERR "Node map not sorted %lx,%lx\n",
+			pr_err("Node map not sorted %lx,%lx\n",
 			       prevbase, base);
 			return -1;
 		}
 
-		printk(KERN_INFO "Node %d MemBase %016lx Limit %016lx\n",
-		       nodeid, base, limit);
+		pr_info("Node %d MemBase %016lx Limit %016lx\n",
+			nodeid, base, limit);
 
 		found++;
 
@@ -180,18 +184,29 @@
 
 		prevbase = base;
 
-		node_set(nodeid, node_possible_map);
+		node_set(nodeid, nodes_parsed);
 	}
 
 	if (!found)
 		return -1;
+	return 0;
+}
 
+int __init k8_scan_nodes(void)
+{
+	unsigned int bits;
+	unsigned int cores;
+	unsigned int apicid_base;
+	int i;
+
+	BUG_ON(nodes_empty(nodes_parsed));
+	node_possible_map = nodes_parsed;
 	memnode_shift = compute_hash_shift(nodes, 8, NULL);
 	if (memnode_shift < 0) {
-		printk(KERN_ERR "No NUMA node hash function found. Contact maintainer\n");
+		pr_err("No NUMA node hash function found. Contact maintainer\n");
 		return -1;
 	}
-	printk(KERN_INFO "Using node hash shift of %d\n", memnode_shift);
+	pr_info("Using node hash shift of %d\n", memnode_shift);
 
 	/* use the coreid bits from early_identify_cpu */
 	bits = boot_cpu_data.x86_coreid_bits;
@@ -200,14 +215,12 @@
 	/* need to get boot_cpu_id early for system with apicid lifting */
 	early_get_boot_cpu_id();
 	if (boot_cpu_physical_apicid > 0) {
-		printk(KERN_INFO "BSP APIC ID: %02x\n",
-				 boot_cpu_physical_apicid);
+		pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid);
 		apicid_base = boot_cpu_physical_apicid;
 	}
 
-	for (i = 0; i < 8; i++) {
-		if (nodes[i].start == nodes[i].end)
-			continue;
+	for_each_node_mask(i, node_possible_map) {
+		int j;
 
 		e820_register_active_regions(i,
 				nodes[i].start >> PAGE_SHIFT,
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 16ccbd7..11a4ad4 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -540,8 +540,14 @@
 	struct die_args *arg = args;
 
 	if (val == DIE_DEBUG && (arg->err & DR_STEP))
-		if (post_kmmio_handler(arg->err, arg->regs) == 1)
+		if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+			/*
+			 * Reset the BS bit in dr6 (pointed by args->err) to
+			 * denote completion of processing
+			 */
+			(*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
 			return NOTIFY_STOP;
+		}
 
 	return NOTIFY_DONE;
 }
diff --git a/arch/x86/mm/numa_32.c b/arch/x86/mm/numa_32.c
index d253006..b20760c 100644
--- a/arch/x86/mm/numa_32.c
+++ b/arch/x86/mm/numa_32.c
@@ -347,8 +347,8 @@
 		(ulong) node_remap_end_vaddr[nid]);
 }
 
-void __init initmem_init(unsigned long start_pfn,
-				  unsigned long end_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long end_pfn,
+				int acpi, int k8)
 {
 	int nid;
 	long kva_target_pfn;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 459913b..83bbc70 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -239,8 +239,14 @@
 	bootmap = early_node_mem(nodeid, bootmap_start, end,
 				 bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
 	if (bootmap == NULL)  {
-		if (nodedata_phys < start || nodedata_phys >= end)
-			free_bootmem(nodedata_phys, pgdat_size);
+		if (nodedata_phys < start || nodedata_phys >= end) {
+			/*
+			 * only need to free it if it is from other node
+			 * bootmem
+			 */
+			if (nid != nodeid)
+				free_bootmem(nodedata_phys, pgdat_size);
+		}
 		node_data[nodeid] = NULL;
 		return;
 	}
@@ -306,8 +312,71 @@
 
 #ifdef CONFIG_NUMA_EMU
 /* Numa emulation */
+static struct bootnode nodes[MAX_NUMNODES] __initdata;
+static struct bootnode physnodes[MAX_NUMNODES] __initdata;
 static char *cmdline __initdata;
 
+static int __init setup_physnodes(unsigned long start, unsigned long end,
+					int acpi, int k8)
+{
+	int nr_nodes = 0;
+	int ret = 0;
+	int i;
+
+#ifdef CONFIG_ACPI_NUMA
+	if (acpi)
+		nr_nodes = acpi_get_nodes(physnodes);
+#endif
+#ifdef CONFIG_K8_NUMA
+	if (k8)
+		nr_nodes = k8_get_nodes(physnodes);
+#endif
+	/*
+	 * Basic sanity checking on the physical node map: there may be errors
+	 * if the SRAT or K8 incorrectly reported the topology or the mem=
+	 * kernel parameter is used.
+	 */
+	for (i = 0; i < nr_nodes; i++) {
+		if (physnodes[i].start == physnodes[i].end)
+			continue;
+		if (physnodes[i].start > end) {
+			physnodes[i].end = physnodes[i].start;
+			continue;
+		}
+		if (physnodes[i].end < start) {
+			physnodes[i].start = physnodes[i].end;
+			continue;
+		}
+		if (physnodes[i].start < start)
+			physnodes[i].start = start;
+		if (physnodes[i].end > end)
+			physnodes[i].end = end;
+	}
+
+	/*
+	 * Remove all nodes that have no memory or were truncated because of the
+	 * limited address range.
+	 */
+	for (i = 0; i < nr_nodes; i++) {
+		if (physnodes[i].start == physnodes[i].end)
+			continue;
+		physnodes[ret].start = physnodes[i].start;
+		physnodes[ret].end = physnodes[i].end;
+		ret++;
+	}
+
+	/*
+	 * If no physical topology was detected, a single node is faked to cover
+	 * the entire address space.
+	 */
+	if (!ret) {
+		physnodes[ret].start = start;
+		physnodes[ret].end = end;
+		ret = 1;
+	}
+	return ret;
+}
+
 /*
  * Setups up nid to range from addr to addr + size.  If the end
  * boundary is greater than max_addr, then max_addr is used instead.
@@ -315,11 +384,9 @@
  * allocation past addr and -1 otherwise.  addr is adjusted to be at
  * the end of the node.
  */
-static int __init setup_node_range(int nid, struct bootnode *nodes, u64 *addr,
-				   u64 size, u64 max_addr)
+static int __init setup_node_range(int nid, u64 *addr, u64 size, u64 max_addr)
 {
 	int ret = 0;
-
 	nodes[nid].start = *addr;
 	*addr += size;
 	if (*addr >= max_addr) {
@@ -335,12 +402,111 @@
 }
 
 /*
+ * Sets up nr_nodes fake nodes interleaved over physical nodes ranging from addr
+ * to max_addr.  The return value is the number of nodes allocated.
+ */
+static int __init split_nodes_interleave(u64 addr, u64 max_addr,
+						int nr_phys_nodes, int nr_nodes)
+{
+	nodemask_t physnode_mask = NODE_MASK_NONE;
+	u64 size;
+	int big;
+	int ret = 0;
+	int i;
+
+	if (nr_nodes <= 0)
+		return -1;
+	if (nr_nodes > MAX_NUMNODES) {
+		pr_info("numa=fake=%d too large, reducing to %d\n",
+			nr_nodes, MAX_NUMNODES);
+		nr_nodes = MAX_NUMNODES;
+	}
+
+	size = (max_addr - addr - e820_hole_size(addr, max_addr)) / nr_nodes;
+	/*
+	 * Calculate the number of big nodes that can be allocated as a result
+	 * of consolidating the remainder.
+	 */
+	big = ((size & ~FAKE_NODE_MIN_HASH_MASK) & nr_nodes) /
+		FAKE_NODE_MIN_SIZE;
+
+	size &= FAKE_NODE_MIN_HASH_MASK;
+	if (!size) {
+		pr_err("Not enough memory for each node.  "
+			"NUMA emulation disabled.\n");
+		return -1;
+	}
+
+	for (i = 0; i < nr_phys_nodes; i++)
+		if (physnodes[i].start != physnodes[i].end)
+			node_set(i, physnode_mask);
+
+	/*
+	 * Continue to fill physical nodes with fake nodes until there is no
+	 * memory left on any of them.
+	 */
+	while (nodes_weight(physnode_mask)) {
+		for_each_node_mask(i, physnode_mask) {
+			u64 end = physnodes[i].start + size;
+			u64 dma32_end = PFN_PHYS(MAX_DMA32_PFN);
+
+			if (ret < big)
+				end += FAKE_NODE_MIN_SIZE;
+
+			/*
+			 * Continue to add memory to this fake node if its
+			 * non-reserved memory is less than the per-node size.
+			 */
+			while (end - physnodes[i].start -
+				e820_hole_size(physnodes[i].start, end) < size) {
+				end += FAKE_NODE_MIN_SIZE;
+				if (end > physnodes[i].end) {
+					end = physnodes[i].end;
+					break;
+				}
+			}
+
+			/*
+			 * If there won't be at least FAKE_NODE_MIN_SIZE of
+			 * non-reserved memory in ZONE_DMA32 for the next node,
+			 * this one must extend to the boundary.
+			 */
+			if (end < dma32_end && dma32_end - end -
+			    e820_hole_size(end, dma32_end) < FAKE_NODE_MIN_SIZE)
+				end = dma32_end;
+
+			/*
+			 * If there won't be enough non-reserved memory for the
+			 * next node, this one must extend to the end of the
+			 * physical node.
+			 */
+			if (physnodes[i].end - end -
+			    e820_hole_size(end, physnodes[i].end) < size)
+				end = physnodes[i].end;
+
+			/*
+			 * Avoid allocating more nodes than requested, which can
+			 * happen as a result of rounding down each node's size
+			 * to FAKE_NODE_MIN_SIZE.
+			 */
+			if (nodes_weight(physnode_mask) + ret >= nr_nodes)
+				end = physnodes[i].end;
+
+			if (setup_node_range(ret++, &physnodes[i].start,
+						end - physnodes[i].start,
+						physnodes[i].end) < 0)
+				node_clear(i, physnode_mask);
+		}
+	}
+	return ret;
+}
+
+/*
  * Splits num_nodes nodes up equally starting at node_start.  The return value
  * is the number of nodes split up and addr is adjusted to be at the end of the
  * last node allocated.
  */
-static int __init split_nodes_equally(struct bootnode *nodes, u64 *addr,
-				      u64 max_addr, int node_start,
+static int __init split_nodes_equally(u64 *addr, u64 max_addr, int node_start,
 				      int num_nodes)
 {
 	unsigned int big;
@@ -388,7 +554,7 @@
 					break;
 				}
 			}
-		if (setup_node_range(i, nodes, addr, end - *addr, max_addr) < 0)
+		if (setup_node_range(i, addr, end - *addr, max_addr) < 0)
 			break;
 	}
 	return i - node_start + 1;
@@ -399,12 +565,12 @@
  * always assigned to a final node and can be asymmetric.  Returns the number of
  * nodes split.
  */
-static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
-				      u64 max_addr, int node_start, u64 size)
+static int __init split_nodes_by_size(u64 *addr, u64 max_addr, int node_start,
+				      u64 size)
 {
 	int i = node_start;
 	size = (size << 20) & FAKE_NODE_MIN_HASH_MASK;
-	while (!setup_node_range(i++, nodes, addr, size, max_addr))
+	while (!setup_node_range(i++, addr, size, max_addr))
 		;
 	return i - node_start;
 }
@@ -413,15 +579,15 @@
  * Sets up the system RAM area from start_pfn to last_pfn according to the
  * numa=fake command-line option.
  */
-static struct bootnode nodes[MAX_NUMNODES] __initdata;
-
-static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn)
+static int __init numa_emulation(unsigned long start_pfn,
+			unsigned long last_pfn, int acpi, int k8)
 {
 	u64 size, addr = start_pfn << PAGE_SHIFT;
 	u64 max_addr = last_pfn << PAGE_SHIFT;
 	int num_nodes = 0, num = 0, coeff_flag, coeff = -1, i;
+	int num_phys_nodes;
 
-	memset(&nodes, 0, sizeof(nodes));
+	num_phys_nodes = setup_physnodes(addr, max_addr, acpi, k8);
 	/*
 	 * If the numa=fake command-line is just a single number N, split the
 	 * system RAM into N fake nodes.
@@ -429,7 +595,8 @@
 	if (!strchr(cmdline, '*') && !strchr(cmdline, ',')) {
 		long n = simple_strtol(cmdline, NULL, 0);
 
-		num_nodes = split_nodes_equally(nodes, &addr, max_addr, 0, n);
+		num_nodes = split_nodes_interleave(addr, max_addr,
+							num_phys_nodes, n);
 		if (num_nodes < 0)
 			return num_nodes;
 		goto out;
@@ -456,8 +623,8 @@
 			size = ((u64)num << 20) & FAKE_NODE_MIN_HASH_MASK;
 			if (size)
 				for (i = 0; i < coeff; i++, num_nodes++)
-					if (setup_node_range(num_nodes, nodes,
-						&addr, size, max_addr) < 0)
+					if (setup_node_range(num_nodes, &addr,
+						size, max_addr) < 0)
 						goto done;
 			if (!*cmdline)
 				break;
@@ -473,7 +640,7 @@
 	if (addr < max_addr) {
 		if (coeff_flag && coeff < 0) {
 			/* Split remaining nodes into num-sized chunks */
-			num_nodes += split_nodes_by_size(nodes, &addr, max_addr,
+			num_nodes += split_nodes_by_size(&addr, max_addr,
 							 num_nodes, num);
 			goto out;
 		}
@@ -482,7 +649,7 @@
 			/* Split remaining nodes into coeff chunks */
 			if (coeff <= 0)
 				break;
-			num_nodes += split_nodes_equally(nodes, &addr, max_addr,
+			num_nodes += split_nodes_equally(&addr, max_addr,
 							 num_nodes, coeff);
 			break;
 		case ',':
@@ -490,8 +657,8 @@
 			break;
 		default:
 			/* Give one final node */
-			setup_node_range(num_nodes, nodes, &addr,
-					 max_addr - addr, max_addr);
+			setup_node_range(num_nodes, &addr, max_addr - addr,
+					 max_addr);
 			num_nodes++;
 		}
 	}
@@ -505,14 +672,10 @@
 	}
 
 	/*
-	 * We need to vacate all active ranges that may have been registered by
-	 * SRAT and set acpi_numa to -1 so that srat_disabled() always returns
-	 * true.  NUMA emulation has succeeded so we will not scan ACPI nodes.
+	 * We need to vacate all active ranges that may have been registered for
+	 * the e820 memory map.
 	 */
 	remove_all_active_ranges();
-#ifdef CONFIG_ACPI_NUMA
-	acpi_numa = -1;
-#endif
 	for_each_node_mask(i, node_possible_map) {
 		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
 						nodes[i].end >> PAGE_SHIFT);
@@ -524,7 +687,8 @@
 }
 #endif /* CONFIG_NUMA_EMU */
 
-void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn)
+void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn,
+				int acpi, int k8)
 {
 	int i;
 
@@ -532,23 +696,22 @@
 	nodes_clear(node_online_map);
 
 #ifdef CONFIG_NUMA_EMU
-	if (cmdline && !numa_emulation(start_pfn, last_pfn))
+	if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, k8))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 #endif
 
 #ifdef CONFIG_ACPI_NUMA
-	if (!numa_off && !acpi_scan_nodes(start_pfn << PAGE_SHIFT,
-					  last_pfn << PAGE_SHIFT))
+	if (!numa_off && acpi && !acpi_scan_nodes(start_pfn << PAGE_SHIFT,
+						  last_pfn << PAGE_SHIFT))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
 #endif
 
 #ifdef CONFIG_K8_NUMA
-	if (!numa_off && !k8_scan_nodes(start_pfn<<PAGE_SHIFT,
-					last_pfn<<PAGE_SHIFT))
+	if (!numa_off && k8 && !k8_scan_nodes())
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
@@ -601,6 +764,25 @@
 early_param("numa", numa_setup);
 
 #ifdef CONFIG_NUMA
+
+static __init int find_near_online_node(int node)
+{
+	int n, val;
+	int min_val = INT_MAX;
+	int best_node = -1;
+
+	for_each_online_node(n) {
+		val = node_distance(node, n);
+
+		if (val < min_val) {
+			min_val = val;
+			best_node = n;
+		}
+	}
+
+	return best_node;
+}
+
 /*
  * Setup early cpu_to_node.
  *
@@ -632,7 +814,7 @@
 		if (node == NUMA_NO_NODE)
 			continue;
 		if (!node_online(node))
-			continue;
+			node = find_near_online_node(node);
 		numa_set_node(cpu, node);
 	}
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index dd38bfb..1d4eb93 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -279,6 +279,22 @@
 		   __pa((unsigned long)__end_rodata) >> PAGE_SHIFT))
 		pgprot_val(forbidden) |= _PAGE_RW;
 
+#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+	/*
+	 * Once the kernel maps the text as RO (kernel_set_to_readonly is set),
+	 * kernel text mappings for the large page aligned text, rodata sections
+	 * will be always read-only. For the kernel identity mappings covering
+	 * the holes caused by this alignment can be anything that user asks.
+	 *
+	 * This will preserve the large page mappings for kernel text/data
+	 * at no extra cost.
+	 */
+	if (kernel_set_to_readonly &&
+	    within(address, (unsigned long)_text,
+		   (unsigned long)__end_rodata_hpage_align))
+		pgprot_val(forbidden) |= _PAGE_RW;
+#endif
+
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
 
 	return prot;
@@ -1069,12 +1085,18 @@
 
 int set_memory_x(unsigned long addr, int numpages)
 {
+	if (!(__supported_pte_mask & _PAGE_NX))
+		return 0;
+
 	return change_page_attr_clear(&addr, numpages, __pgprot(_PAGE_NX), 0);
 }
 EXPORT_SYMBOL(set_memory_x);
 
 int set_memory_nx(unsigned long addr, int numpages)
 {
+	if (!(__supported_pte_mask & _PAGE_NX))
+		return 0;
+
 	return change_page_attr_set(&addr, numpages, __pgprot(_PAGE_NX), 0);
 }
 EXPORT_SYMBOL(set_memory_nx);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e78cd0e..66b55d6 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -20,6 +20,7 @@
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/tlbflush.h>
+#include <asm/x86_init.h>
 #include <asm/pgtable.h>
 #include <asm/fcntl.h>
 #include <asm/e820.h>
@@ -355,9 +356,6 @@
  * - _PAGE_CACHE_UC_MINUS
  * - _PAGE_CACHE_UC
  *
- * req_type will have a special case value '-1', when requester want to inherit
- * the memory type from mtrr (if WB), existing PAT, defaulting to UC_MINUS.
- *
  * If new_type is NULL, function will return an error if it cannot reserve the
  * region with req_type. If new_type is non-NULL, function will return
  * available type in new_type in case of no error. In case of any error
@@ -377,9 +375,7 @@
 	if (!pat_enabled) {
 		/* This is identical to page table setting without PAT */
 		if (new_type) {
-			if (req_type == -1)
-				*new_type = _PAGE_CACHE_WB;
-			else if (req_type == _PAGE_CACHE_WC)
+			if (req_type == _PAGE_CACHE_WC)
 				*new_type = _PAGE_CACHE_UC_MINUS;
 			else
 				*new_type = req_type & _PAGE_CACHE_MASK;
@@ -388,7 +384,7 @@
 	}
 
 	/* Low ISA region is always mapped WB in page table. No need to track */
-	if (is_ISA_range(start, end - 1)) {
+	if (x86_platform.is_untracked_pat_range(start, end)) {
 		if (new_type)
 			*new_type = _PAGE_CACHE_WB;
 		return 0;
@@ -499,7 +495,7 @@
 		return 0;
 
 	/* Low ISA region is always mapped WB. No need to track */
-	if (is_ISA_range(start, end - 1))
+	if (x86_platform.is_untracked_pat_range(start, end))
 		return 0;
 
 	is_range_ram = pat_pagerange_is_ram(start, end);
@@ -582,7 +578,7 @@
 	int rettype = _PAGE_CACHE_WB;
 	struct memtype *entry;
 
-	if (is_ISA_range(paddr, paddr + PAGE_SIZE - 1))
+	if (x86_platform.is_untracked_pat_range(paddr, paddr + PAGE_SIZE))
 		return rettype;
 
 	if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
@@ -1018,8 +1014,10 @@
 
 static int __init pat_memtype_list_init(void)
 {
-	debugfs_create_file("pat_memtype_list", S_IRUSR, arch_debugfs_dir,
-				NULL, &memtype_fops);
+	if (pat_enabled) {
+		debugfs_create_file("pat_memtype_list", S_IRUSR,
+				    arch_debugfs_dir, NULL, &memtype_fops);
+	}
 	return 0;
 }
 
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
index 513d8ed..a3250aa 100644
--- a/arch/x86/mm/setup_nx.c
+++ b/arch/x86/mm/setup_nx.c
@@ -3,10 +3,8 @@
 #include <linux/init.h>
 
 #include <asm/pgtable.h>
+#include <asm/proto.h>
 
-int nx_enabled;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static int disable_nx __cpuinitdata;
 
 /*
@@ -22,48 +20,41 @@
 	if (!str)
 		return -EINVAL;
 	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
 		disable_nx = 0;
 	} else if (!strncmp(str, "off", 3)) {
 		disable_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
 	}
+	x86_configure_nx();
 	return 0;
 }
 early_param("noexec", noexec_setup);
-#endif
 
-#ifdef CONFIG_X86_PAE
-void __init set_nx(void)
+void __cpuinit x86_configure_nx(void)
 {
-	unsigned int v[4], l, h;
-
-	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
-		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
-		if ((v[3] & (1 << 20)) && !disable_nx) {
-			rdmsr(MSR_EFER, l, h);
-			l |= EFER_NX;
-			wrmsr(MSR_EFER, l, h);
-			nx_enabled = 1;
-			__supported_pte_mask |= _PAGE_NX;
-		}
-	}
-}
-#else
-void set_nx(void)
-{
-}
-#endif
-
-#ifdef CONFIG_X86_64
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || disable_nx)
+	if (cpu_has_nx && !disable_nx)
+		__supported_pte_mask |= _PAGE_NX;
+	else
 		__supported_pte_mask &= ~_PAGE_NX;
 }
-#endif
 
+void __init x86_report_nx(void)
+{
+	if (!cpu_has_nx) {
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "missing in CPU or disabled in BIOS!\n");
+	} else {
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+		if (disable_nx) {
+			printk(KERN_INFO "NX (Execute Disable) protection: "
+			       "disabled by kernel command line option\n");
+		} else {
+			printk(KERN_INFO "NX (Execute Disable) protection: "
+			       "active\n");
+		}
+#else
+		/* 32bit non-PAE kernel, NX cannot be used */
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "cannot be enabled: non-PAE kernel!\n");
+#endif
+	}
+}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index dbb5381..d890754 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -136,7 +136,7 @@
 	apicid_to_node[apic_id] = node;
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
+	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
 	       pxm, apic_id, node);
 }
 
@@ -170,7 +170,7 @@
 	apicid_to_node[apic_id] = node;
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
+	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
 	       pxm, apic_id, node);
 }
 
@@ -290,8 +290,6 @@
 
 	printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
 	       start, end);
-	e820_register_active_regions(node, start >> PAGE_SHIFT,
-				     end >> PAGE_SHIFT);
 
 	if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
 		update_nodes_add(node, start, end);
@@ -338,6 +336,19 @@
 
 void __init acpi_numa_arch_fixup(void) {}
 
+int __init acpi_get_nodes(struct bootnode *physnodes)
+{
+	int i;
+	int ret = 0;
+
+	for_each_node_mask(i, nodes_parsed) {
+		physnodes[ret].start = nodes[i].start;
+		physnodes[ret].end = nodes[i].end;
+		ret++;
+	}
+	return ret;
+}
+
 /* Use the information discovered above to actually set up the nodes. */
 int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 {
@@ -350,11 +361,6 @@
 	for (i = 0; i < MAX_NUMNODES; i++)
 		cutoff_node(i, start, end);
 
-	if (!nodes_cover_memory(nodes)) {
-		bad_srat();
-		return -1;
-	}
-
 	memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks,
 					   memblk_nodeid);
 	if (memnode_shift < 0) {
@@ -364,6 +370,14 @@
 		return -1;
 	}
 
+	for_each_node_mask(i, nodes_parsed)
+		e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
+						nodes[i].end >> PAGE_SHIFT);
+	if (!nodes_cover_memory(nodes)) {
+		bad_srat();
+		return -1;
+	}
+
 	/* Account for nodes with cpus and no memory */
 	nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
 
@@ -454,7 +468,6 @@
 	for (i = 0; i < num_nodes; i++)
 		if (fake_nodes[i].start != fake_nodes[i].end)
 			node_set(i, nodes_parsed);
-	WARN_ON(!nodes_cover_memory(fake_nodes));
 }
 
 static int null_slit_node_compare(int a, int b)
diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c
index 427fd1b..8565d94 100644
--- a/arch/x86/mm/testmmiotrace.c
+++ b/arch/x86/mm/testmmiotrace.c
@@ -1,12 +1,13 @@
 /*
  * Written by Pekka Paalanen, 2008-2009 <pq@iki.fi>
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mmiotrace.h>
 
-#define MODULE_NAME "testmmiotrace"
-
 static unsigned long mmio_address;
 module_param(mmio_address, ulong, 0);
 MODULE_PARM_DESC(mmio_address, " Start address of the mapping of 16 kB "
@@ -30,7 +31,7 @@
 static void do_write_test(void __iomem *p)
 {
 	unsigned int i;
-	pr_info(MODULE_NAME ": write test.\n");
+	pr_info("write test.\n");
 	mmiotrace_printk("Write test.\n");
 
 	for (i = 0; i < 256; i++)
@@ -47,7 +48,7 @@
 {
 	unsigned int i;
 	unsigned errs[3] = { 0 };
-	pr_info(MODULE_NAME ": read test.\n");
+	pr_info("read test.\n");
 	mmiotrace_printk("Read test.\n");
 
 	for (i = 0; i < 256; i++)
@@ -68,7 +69,7 @@
 
 static void do_read_far_test(void __iomem *p)
 {
-	pr_info(MODULE_NAME ": read far test.\n");
+	pr_info("read far test.\n");
 	mmiotrace_printk("Read far test.\n");
 
 	ioread32(p + read_far);
@@ -78,7 +79,7 @@
 {
 	void __iomem *p = ioremap_nocache(mmio_address, size);
 	if (!p) {
-		pr_err(MODULE_NAME ": could not ioremap, aborting.\n");
+		pr_err("could not ioremap, aborting.\n");
 		return;
 	}
 	mmiotrace_printk("ioremap returned %p.\n", p);
@@ -94,24 +95,22 @@
 	unsigned long size = (read_far) ? (8 << 20) : (16 << 10);
 
 	if (mmio_address == 0) {
-		pr_err(MODULE_NAME ": you have to use the module argument "
-							"mmio_address.\n");
-		pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS"
-				" YOU REALLY KNOW WHAT YOU ARE DOING!\n");
+		pr_err("you have to use the module argument mmio_address.\n");
+		pr_err("DO NOT LOAD THIS MODULE UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!\n");
 		return -ENXIO;
 	}
 
-	pr_warning(MODULE_NAME ": WARNING: mapping %lu kB @ 0x%08lx in PCI "
-		"address space, and writing 16 kB of rubbish in there.\n",
-		 size >> 10, mmio_address);
+	pr_warning("WARNING: mapping %lu kB @ 0x%08lx in PCI address space, "
+		   "and writing 16 kB of rubbish in there.\n",
+		   size >> 10, mmio_address);
 	do_test(size);
-	pr_info(MODULE_NAME ": All done.\n");
+	pr_info("All done.\n");
 	return 0;
 }
 
 static void __exit cleanup(void)
 {
-	pr_debug(MODULE_NAME ": unloaded.\n");
+	pr_debug("unloaded.\n");
 }
 
 module_init(init);
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 36fe08e..65b58e4 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -8,6 +8,7 @@
 
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
+#include <asm/cache.h>
 #include <asm/apic.h>
 #include <asm/uv/uv.h>
 
@@ -43,7 +44,7 @@
 		spinlock_t tlbstate_lock;
 		DECLARE_BITMAP(flush_cpumask, NR_CPUS);
 	};
-	char pad[CONFIG_X86_INTERNODE_CACHE_BYTES];
+	char pad[INTERNODE_CACHE_BYTES];
 } ____cacheline_internodealigned_in_smp;
 
 /* State is put into the per CPU data section, but padded
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 8aa85f1..0a979f3 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -18,6 +18,7 @@
 #include <asm/mce.h>
 #include <asm/xcr.h>
 #include <asm/suspend.h>
+#include <asm/debugreg.h>
 
 #ifdef CONFIG_X86_32
 static struct saved_context saved_context;
@@ -142,31 +143,6 @@
 #endif
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
-
-	/*
-	 * Now maybe reload the debug registers
-	 */
-	if (current->thread.debugreg7) {
-#ifdef CONFIG_X86_32
-		set_debugreg(current->thread.debugreg0, 0);
-		set_debugreg(current->thread.debugreg1, 1);
-		set_debugreg(current->thread.debugreg2, 2);
-		set_debugreg(current->thread.debugreg3, 3);
-		/* no 4 and 5 */
-		set_debugreg(current->thread.debugreg6, 6);
-		set_debugreg(current->thread.debugreg7, 7);
-#else
-		/* CONFIG_X86_64 */
-		loaddebug(&current->thread, 0);
-		loaddebug(&current->thread, 1);
-		loaddebug(&current->thread, 2);
-		loaddebug(&current->thread, 3);
-		/* no 4 and 5 */
-		loaddebug(&current->thread, 6);
-		loaddebug(&current->thread, 7);
-#endif
-	}
-
 }
 
 /**
diff --git a/arch/x86/tools/Makefile b/arch/x86/tools/Makefile
new file mode 100644
index 0000000..f820826
--- /dev/null
+++ b/arch/x86/tools/Makefile
@@ -0,0 +1,31 @@
+PHONY += posttest
+
+ifeq ($(KBUILD_VERBOSE),1)
+  posttest_verbose = -v
+else
+  posttest_verbose =
+endif
+
+ifeq ($(CONFIG_64BIT),y)
+  posttest_64bit = -y
+else
+  posttest_64bit = -n
+endif
+
+distill_awk = $(srctree)/arch/x86/tools/distill.awk
+chkobjdump = $(srctree)/arch/x86/tools/chkobjdump.awk
+
+quiet_cmd_posttest = TEST    $@
+      cmd_posttest = ($(OBJDUMP) -v | $(AWK) -f $(chkobjdump)) || $(OBJDUMP) -d -j .text $(objtree)/vmlinux | $(AWK) -f $(distill_awk) | $(obj)/test_get_len $(posttest_64bit) $(posttest_verbose)
+
+posttest: $(obj)/test_get_len vmlinux
+	$(call cmd,posttest)
+
+hostprogs-y	:= test_get_len
+
+# -I needed for generated C source and C source which in the kernel tree.
+HOSTCFLAGS_test_get_len.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/
+
+# Dependencies are also needed.
+$(obj)/test_get_len.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
+
diff --git a/arch/x86/tools/chkobjdump.awk b/arch/x86/tools/chkobjdump.awk
new file mode 100644
index 0000000..0d13cd9
--- /dev/null
+++ b/arch/x86/tools/chkobjdump.awk
@@ -0,0 +1,23 @@
+# GNU objdump version checker
+#
+# Usage:
+# objdump -v | awk -f chkobjdump.awk
+BEGIN {
+	# objdump version 2.19 or later is OK for the test.
+	od_ver = 2;
+	od_sver = 19;
+}
+
+/^GNU/ {
+	split($4, ver, ".");
+	if (ver[1] > od_ver ||
+	    (ver[1] == od_ver && ver[2] >= od_sver)) {
+		exit 1;
+	} else {
+		printf("Warning: objdump version %s is older than %d.%d\n",
+		       $4, od_ver, od_sver);
+		print("Warning: Skipping posttest.");
+		# Logic is inverted, because we just skip test without error.
+		exit 0;
+	}
+}
diff --git a/arch/x86/tools/distill.awk b/arch/x86/tools/distill.awk
new file mode 100644
index 0000000..c13c0ee
--- /dev/null
+++ b/arch/x86/tools/distill.awk
@@ -0,0 +1,47 @@
+#!/bin/awk -f
+# Usage: objdump -d a.out | awk -f distill.awk | ./test_get_len
+# Distills the disassembly as follows:
+# - Removes all lines except the disassembled instructions.
+# - For instructions that exceed 1 line (7 bytes), crams all the hex bytes
+# into a single line.
+# - Remove bad(or prefix only) instructions
+
+BEGIN {
+	prev_addr = ""
+	prev_hex = ""
+	prev_mnemonic = ""
+	bad_expr = "(\\(bad\\)|^rex|^.byte|^rep(z|nz)$|^lock$|^es$|^cs$|^ss$|^ds$|^fs$|^gs$|^data(16|32)$|^addr(16|32|64))"
+	fwait_expr = "^9b "
+	fwait_str="9b\tfwait"
+}
+
+/^ *[0-9a-f]+ <[^>]*>:/ {
+	# Symbol entry
+	printf("%s%s\n", $2, $1)
+}
+
+/^ *[0-9a-f]+:/ {
+	if (split($0, field, "\t") < 3) {
+		# This is a continuation of the same insn.
+		prev_hex = prev_hex field[2]
+	} else {
+		# Skip bad instructions
+		if (match(prev_mnemonic, bad_expr))
+			prev_addr = ""
+		# Split fwait from other f* instructions
+		if (match(prev_hex, fwait_expr) && prev_mnemonic != "fwait") {
+			printf "%s\t%s\n", prev_addr, fwait_str
+			sub(fwait_expr, "", prev_hex)
+		}
+		if (prev_addr != "")
+			printf "%s\t%s\t%s\n", prev_addr, prev_hex, prev_mnemonic
+		prev_addr = field[1]
+		prev_hex = field[2]
+		prev_mnemonic = field[3]
+	}
+}
+
+END {
+	if (prev_addr != "")
+		printf "%s\t%s\t%s\n", prev_addr, prev_hex, prev_mnemonic
+}
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
new file mode 100644
index 0000000..e34e92a
--- /dev/null
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -0,0 +1,380 @@
+#!/bin/awk -f
+# gen-insn-attr-x86.awk: Instruction attribute table generator
+# Written by Masami Hiramatsu <mhiramat@redhat.com>
+#
+# Usage: awk -f gen-insn-attr-x86.awk x86-opcode-map.txt > inat-tables.c
+
+# Awk implementation sanity check
+function check_awk_implement() {
+	if (!match("abc", "[[:lower:]]+"))
+		return "Your awk doesn't support charactor-class."
+	if (sprintf("%x", 0) != "0")
+		return "Your awk has a printf-format problem."
+	return ""
+}
+
+# Clear working vars
+function clear_vars() {
+	delete table
+	delete lptable2
+	delete lptable1
+	delete lptable3
+	eid = -1 # escape id
+	gid = -1 # group id
+	aid = -1 # AVX id
+	tname = ""
+}
+
+BEGIN {
+	# Implementation error checking
+	awkchecked = check_awk_implement()
+	if (awkchecked != "") {
+		print "Error: " awkchecked > "/dev/stderr"
+		print "Please try to use gawk." > "/dev/stderr"
+		exit 1
+	}
+
+	# Setup generating tables
+	print "/* x86 opcode map generated from x86-opcode-map.txt */"
+	print "/* Do not change this code. */\n"
+	ggid = 1
+	geid = 1
+	gaid = 0
+	delete etable
+	delete gtable
+	delete atable
+
+	opnd_expr = "^[[:alpha:]/]"
+	ext_expr = "^\\("
+	sep_expr = "^\\|$"
+	group_expr = "^Grp[[:alnum:]]+"
+
+	imm_expr = "^[IJAO][[:lower:]]"
+	imm_flag["Ib"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
+	imm_flag["Jb"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
+	imm_flag["Iw"] = "INAT_MAKE_IMM(INAT_IMM_WORD)"
+	imm_flag["Id"] = "INAT_MAKE_IMM(INAT_IMM_DWORD)"
+	imm_flag["Iq"] = "INAT_MAKE_IMM(INAT_IMM_QWORD)"
+	imm_flag["Ap"] = "INAT_MAKE_IMM(INAT_IMM_PTR)"
+	imm_flag["Iz"] = "INAT_MAKE_IMM(INAT_IMM_VWORD32)"
+	imm_flag["Jz"] = "INAT_MAKE_IMM(INAT_IMM_VWORD32)"
+	imm_flag["Iv"] = "INAT_MAKE_IMM(INAT_IMM_VWORD)"
+	imm_flag["Ob"] = "INAT_MOFFSET"
+	imm_flag["Ov"] = "INAT_MOFFSET"
+
+	modrm_expr = "^([CDEGMNPQRSUVW/][[:lower:]]+|NTA|T[012])"
+	force64_expr = "\\([df]64\\)"
+	rex_expr = "^REX(\\.[XRWB]+)*"
+	fpu_expr = "^ESC" # TODO
+
+	lprefix1_expr = "\\(66\\)"
+	lprefix2_expr = "\\(F3\\)"
+	lprefix3_expr = "\\(F2\\)"
+	max_lprefix = 4
+
+	vexok_expr = "\\(VEX\\)"
+	vexonly_expr = "\\(oVEX\\)"
+
+	prefix_expr = "\\(Prefix\\)"
+	prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ"
+	prefix_num["REPNE"] = "INAT_PFX_REPNE"
+	prefix_num["REP/REPE"] = "INAT_PFX_REPE"
+	prefix_num["LOCK"] = "INAT_PFX_LOCK"
+	prefix_num["SEG=CS"] = "INAT_PFX_CS"
+	prefix_num["SEG=DS"] = "INAT_PFX_DS"
+	prefix_num["SEG=ES"] = "INAT_PFX_ES"
+	prefix_num["SEG=FS"] = "INAT_PFX_FS"
+	prefix_num["SEG=GS"] = "INAT_PFX_GS"
+	prefix_num["SEG=SS"] = "INAT_PFX_SS"
+	prefix_num["Address-Size"] = "INAT_PFX_ADDRSZ"
+	prefix_num["2bytes-VEX"] = "INAT_PFX_VEX2"
+	prefix_num["3bytes-VEX"] = "INAT_PFX_VEX3"
+
+	clear_vars()
+}
+
+function semantic_error(msg) {
+	print "Semantic error at " NR ": " msg > "/dev/stderr"
+	exit 1
+}
+
+function debug(msg) {
+	print "DEBUG: " msg
+}
+
+function array_size(arr,   i,c) {
+	c = 0
+	for (i in arr)
+		c++
+	return c
+}
+
+/^Table:/ {
+	print "/* " $0 " */"
+	if (tname != "")
+		semantic_error("Hit Table: before EndTable:.");
+}
+
+/^Referrer:/ {
+	if (NF != 1) {
+		# escape opcode table
+		ref = ""
+		for (i = 2; i <= NF; i++)
+			ref = ref $i
+		eid = escape[ref]
+		tname = sprintf("inat_escape_table_%d", eid)
+	}
+}
+
+/^AVXcode:/ {
+	if (NF != 1) {
+		# AVX/escape opcode table
+		aid = $2
+		if (gaid <= aid)
+			gaid = aid + 1
+		if (tname == "")	# AVX only opcode table
+			tname = sprintf("inat_avx_table_%d", $2)
+	}
+	if (aid == -1 && eid == -1)	# primary opcode table
+		tname = "inat_primary_table"
+}
+
+/^GrpTable:/ {
+	print "/* " $0 " */"
+	if (!($2 in group))
+		semantic_error("No group: " $2 )
+	gid = group[$2]
+	tname = "inat_group_table_" gid
+}
+
+function print_table(tbl,name,fmt,n)
+{
+	print "const insn_attr_t " name " = {"
+	for (i = 0; i < n; i++) {
+		id = sprintf(fmt, i)
+		if (tbl[id])
+			print "	[" id "] = " tbl[id] ","
+	}
+	print "};"
+}
+
+/^EndTable/ {
+	if (gid != -1) {
+		# print group tables
+		if (array_size(table) != 0) {
+			print_table(table, tname "[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,0] = tname
+		}
+		if (array_size(lptable1) != 0) {
+			print_table(lptable1, tname "_1[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,1] = tname "_1"
+		}
+		if (array_size(lptable2) != 0) {
+			print_table(lptable2, tname "_2[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,2] = tname "_2"
+		}
+		if (array_size(lptable3) != 0) {
+			print_table(lptable3, tname "_3[INAT_GROUP_TABLE_SIZE]",
+				    "0x%x", 8)
+			gtable[gid,3] = tname "_3"
+		}
+	} else {
+		# print primary/escaped tables
+		if (array_size(table) != 0) {
+			print_table(table, tname "[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,0] = tname
+			if (aid >= 0)
+				atable[aid,0] = tname
+		}
+		if (array_size(lptable1) != 0) {
+			print_table(lptable1,tname "_1[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,1] = tname "_1"
+			if (aid >= 0)
+				atable[aid,1] = tname "_1"
+		}
+		if (array_size(lptable2) != 0) {
+			print_table(lptable2,tname "_2[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,2] = tname "_2"
+			if (aid >= 0)
+				atable[aid,2] = tname "_2"
+		}
+		if (array_size(lptable3) != 0) {
+			print_table(lptable3,tname "_3[INAT_OPCODE_TABLE_SIZE]",
+				    "0x%02x", 256)
+			etable[eid,3] = tname "_3"
+			if (aid >= 0)
+				atable[aid,3] = tname "_3"
+		}
+	}
+	print ""
+	clear_vars()
+}
+
+function add_flags(old,new) {
+	if (old && new)
+		return old " | " new
+	else if (old)
+		return old
+	else
+		return new
+}
+
+# convert operands to flags.
+function convert_operands(opnd,       i,imm,mod)
+{
+	imm = null
+	mod = null
+	for (i in opnd) {
+		i  = opnd[i]
+		if (match(i, imm_expr) == 1) {
+			if (!imm_flag[i])
+				semantic_error("Unknown imm opnd: " i)
+			if (imm) {
+				if (i != "Ib")
+					semantic_error("Second IMM error")
+				imm = add_flags(imm, "INAT_SCNDIMM")
+			} else
+				imm = imm_flag[i]
+		} else if (match(i, modrm_expr))
+			mod = "INAT_MODRM"
+	}
+	return add_flags(imm, mod)
+}
+
+/^[0-9a-f]+\:/ {
+	if (NR == 1)
+		next
+	# get index
+	idx = "0x" substr($1, 1, index($1,":") - 1)
+	if (idx in table)
+		semantic_error("Redefine " idx " in " tname)
+
+	# check if escaped opcode
+	if ("escape" == $2) {
+		if ($3 != "#")
+			semantic_error("No escaped name")
+		ref = ""
+		for (i = 4; i <= NF; i++)
+			ref = ref $i
+		if (ref in escape)
+			semantic_error("Redefine escape (" ref ")")
+		escape[ref] = geid
+		geid++
+		table[idx] = "INAT_MAKE_ESCAPE(" escape[ref] ")"
+		next
+	}
+
+	variant = null
+	# converts
+	i = 2
+	while (i <= NF) {
+		opcode = $(i++)
+		delete opnds
+		ext = null
+		flags = null
+		opnd = null
+		# parse one opcode
+		if (match($i, opnd_expr)) {
+			opnd = $i
+			split($(i++), opnds, ",")
+			flags = convert_operands(opnds)
+		}
+		if (match($i, ext_expr))
+			ext = $(i++)
+		if (match($i, sep_expr))
+			i++
+		else if (i < NF)
+			semantic_error($i " is not a separator")
+
+		# check if group opcode
+		if (match(opcode, group_expr)) {
+			if (!(opcode in group)) {
+				group[opcode] = ggid
+				ggid++
+			}
+			flags = add_flags(flags, "INAT_MAKE_GROUP(" group[opcode] ")")
+		}
+		# check force(or default) 64bit
+		if (match(ext, force64_expr))
+			flags = add_flags(flags, "INAT_FORCE64")
+
+		# check REX prefix
+		if (match(opcode, rex_expr))
+			flags = add_flags(flags, "INAT_MAKE_PREFIX(INAT_PFX_REX)")
+
+		# check coprocessor escape : TODO
+		if (match(opcode, fpu_expr))
+			flags = add_flags(flags, "INAT_MODRM")
+
+		# check VEX only code
+		if (match(ext, vexonly_expr))
+			flags = add_flags(flags, "INAT_VEXOK | INAT_VEXONLY")
+
+		# check VEX only code
+		if (match(ext, vexok_expr))
+			flags = add_flags(flags, "INAT_VEXOK")
+
+		# check prefixes
+		if (match(ext, prefix_expr)) {
+			if (!prefix_num[opcode])
+				semantic_error("Unknown prefix: " opcode)
+			flags = add_flags(flags, "INAT_MAKE_PREFIX(" prefix_num[opcode] ")")
+		}
+		if (length(flags) == 0)
+			continue
+		# check if last prefix
+		if (match(ext, lprefix1_expr)) {
+			lptable1[idx] = add_flags(lptable1[idx],flags)
+			variant = "INAT_VARIANT"
+		} else if (match(ext, lprefix2_expr)) {
+			lptable2[idx] = add_flags(lptable2[idx],flags)
+			variant = "INAT_VARIANT"
+		} else if (match(ext, lprefix3_expr)) {
+			lptable3[idx] = add_flags(lptable3[idx],flags)
+			variant = "INAT_VARIANT"
+		} else {
+			table[idx] = add_flags(table[idx],flags)
+		}
+	}
+	if (variant)
+		table[idx] = add_flags(table[idx],variant)
+}
+
+END {
+	if (awkchecked != "")
+		exit 1
+	# print escape opcode map's array
+	print "/* Escape opcode map array */"
+	print "const insn_attr_t const *inat_escape_tables[INAT_ESC_MAX + 1]" \
+	      "[INAT_LSTPFX_MAX + 1] = {"
+	for (i = 0; i < geid; i++)
+		for (j = 0; j < max_lprefix; j++)
+			if (etable[i,j])
+				print "	["i"]["j"] = "etable[i,j]","
+	print "};\n"
+	# print group opcode map's array
+	print "/* Group opcode map array */"
+	print "const insn_attr_t const *inat_group_tables[INAT_GRP_MAX + 1]"\
+	      "[INAT_LSTPFX_MAX + 1] = {"
+	for (i = 0; i < ggid; i++)
+		for (j = 0; j < max_lprefix; j++)
+			if (gtable[i,j])
+				print "	["i"]["j"] = "gtable[i,j]","
+	print "};\n"
+	# print AVX opcode map's array
+	print "/* AVX opcode map array */"
+	print "const insn_attr_t const *inat_avx_tables[X86_VEX_M_MAX + 1]"\
+	      "[INAT_LSTPFX_MAX + 1] = {"
+	for (i = 0; i < gaid; i++)
+		for (j = 0; j < max_lprefix; j++)
+			if (atable[i,j])
+				print "	["i"]["j"] = "atable[i,j]","
+	print "};"
+}
+
diff --git a/arch/x86/tools/test_get_len.c b/arch/x86/tools/test_get_len.c
new file mode 100644
index 0000000..d8214dc
--- /dev/null
+++ b/arch/x86/tools/test_get_len.c
@@ -0,0 +1,173 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <unistd.h>
+
+#define unlikely(cond) (cond)
+
+#include <asm/insn.h>
+#include <inat.c>
+#include <insn.c>
+
+/*
+ * Test of instruction analysis in general and insn_get_length() in
+ * particular.  See if insn_get_length() and the disassembler agree
+ * on the length of each instruction in an elf disassembly.
+ *
+ * Usage: objdump -d a.out | awk -f distill.awk | ./test_get_len
+ */
+
+const char *prog;
+static int verbose;
+static int x86_64;
+
+static void usage(void)
+{
+	fprintf(stderr, "Usage: objdump -d a.out | awk -f distill.awk |"
+		" %s [-y|-n] [-v] \n", prog);
+	fprintf(stderr, "\t-y	64bit mode\n");
+	fprintf(stderr, "\t-n	32bit mode\n");
+	fprintf(stderr, "\t-v	verbose mode\n");
+	exit(1);
+}
+
+static void malformed_line(const char *line, int line_nr)
+{
+	fprintf(stderr, "%s: malformed line %d:\n%s", prog, line_nr, line);
+	exit(3);
+}
+
+static void dump_field(FILE *fp, const char *name, const char *indent,
+		       struct insn_field *field)
+{
+	fprintf(fp, "%s.%s = {\n", indent, name);
+	fprintf(fp, "%s\t.value = %d, bytes[] = {%x, %x, %x, %x},\n",
+		indent, field->value, field->bytes[0], field->bytes[1],
+		field->bytes[2], field->bytes[3]);
+	fprintf(fp, "%s\t.got = %d, .nbytes = %d},\n", indent,
+		field->got, field->nbytes);
+}
+
+static void dump_insn(FILE *fp, struct insn *insn)
+{
+	fprintf(fp, "Instruction = { \n");
+	dump_field(fp, "prefixes", "\t",	&insn->prefixes);
+	dump_field(fp, "rex_prefix", "\t",	&insn->rex_prefix);
+	dump_field(fp, "vex_prefix", "\t",	&insn->vex_prefix);
+	dump_field(fp, "opcode", "\t",		&insn->opcode);
+	dump_field(fp, "modrm", "\t",		&insn->modrm);
+	dump_field(fp, "sib", "\t",		&insn->sib);
+	dump_field(fp, "displacement", "\t",	&insn->displacement);
+	dump_field(fp, "immediate1", "\t",	&insn->immediate1);
+	dump_field(fp, "immediate2", "\t",	&insn->immediate2);
+	fprintf(fp, "\t.attr = %x, .opnd_bytes = %d, .addr_bytes = %d,\n",
+		insn->attr, insn->opnd_bytes, insn->addr_bytes);
+	fprintf(fp, "\t.length = %d, .x86_64 = %d, .kaddr = %p}\n",
+		insn->length, insn->x86_64, insn->kaddr);
+}
+
+static void parse_args(int argc, char **argv)
+{
+	int c;
+	prog = argv[0];
+	while ((c = getopt(argc, argv, "ynv")) != -1) {
+		switch (c) {
+		case 'y':
+			x86_64 = 1;
+			break;
+		case 'n':
+			x86_64 = 0;
+			break;
+		case 'v':
+			verbose = 1;
+			break;
+		default:
+			usage();
+		}
+	}
+}
+
+#define BUFSIZE 256
+
+int main(int argc, char **argv)
+{
+	char line[BUFSIZE], sym[BUFSIZE] = "<unknown>";
+	unsigned char insn_buf[16];
+	struct insn insn;
+	int insns = 0, c;
+	int warnings = 0;
+
+	parse_args(argc, argv);
+
+	while (fgets(line, BUFSIZE, stdin)) {
+		char copy[BUFSIZE], *s, *tab1, *tab2;
+		int nb = 0;
+		unsigned int b;
+
+		if (line[0] == '<') {
+			/* Symbol line */
+			strcpy(sym, line);
+			continue;
+		}
+
+		insns++;
+		memset(insn_buf, 0, 16);
+		strcpy(copy, line);
+		tab1 = strchr(copy, '\t');
+		if (!tab1)
+			malformed_line(line, insns);
+		s = tab1 + 1;
+		s += strspn(s, " ");
+		tab2 = strchr(s, '\t');
+		if (!tab2)
+			malformed_line(line, insns);
+		*tab2 = '\0';	/* Characters beyond tab2 aren't examined */
+		while (s < tab2) {
+			if (sscanf(s, "%x", &b) == 1) {
+				insn_buf[nb++] = (unsigned char) b;
+				s += 3;
+			} else
+				break;
+		}
+		/* Decode an instruction */
+		insn_init(&insn, insn_buf, x86_64);
+		insn_get_length(&insn);
+		if (insn.length != nb) {
+			warnings++;
+			fprintf(stderr, "Warning: %s found difference at %s\n",
+				prog, sym);
+			fprintf(stderr, "Warning: %s", line);
+			fprintf(stderr, "Warning: objdump says %d bytes, but "
+				"insn_get_length() says %d\n", nb,
+				insn.length);
+			if (verbose)
+				dump_insn(stderr, &insn);
+		}
+	}
+	if (warnings)
+		fprintf(stderr, "Warning: decoded and checked %d"
+			" instructions with %d warnings\n", insns, warnings);
+	else
+		fprintf(stderr, "Succeed: decoded and checked %d"
+			" instructions\n", insns);
+	return 0;
+}
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 58bc00f..02b442e 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -393,7 +393,6 @@
 
 static ctl_table abi_root_table2[] = {
 	{
-		.ctl_name = CTL_ABI,
 		.procname = "abi",
 		.mode = 0555,
 		.child = abi_table2
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index dfbf70e..c462cea 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1093,10 +1093,8 @@
 
 	__supported_pte_mask |= _PAGE_IOMAP;
 
-#ifdef CONFIG_X86_64
 	/* Work out if we support NX */
-	check_efer();
-#endif
+	x86_configure_nx();
 
 	xen_setup_features();
 
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index fe03eee..738da0c 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -73,7 +73,7 @@
 
 	xen_setup_cpu_clockevents();
 
-	cpu_set(cpu, cpu_online_map);
+	set_cpu_online(cpu, true);
 	percpu_write(cpu_state, CPU_ONLINE);
 	wmb();
 
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index b7b8fbe..a508f2f 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -101,6 +101,7 @@
 #define flush_cache_vmap(start,end)	flush_cache_all()
 #define flush_cache_vunmap(start,end)	flush_cache_all()
 
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page*);
 extern void flush_cache_range(struct vm_area_struct*, ulong, ulong);
 extern void flush_cache_page(struct vm_area_struct*, unsigned long, unsigned long);
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index beb3a6b..cbdf2ff 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -71,4 +71,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h
index c092c8f..4e55dc7 100644
--- a/arch/xtensa/include/asm/unistd.h
+++ b/arch/xtensa/include/asm/unistd.h
@@ -681,8 +681,10 @@
 __SYSCALL(305, sys_ni_syscall, 0)
 #define __NR_eventfd				306
 __SYSCALL(306, sys_eventfd, 1)
+#define __NR_recvmmsg				307
+__SYSCALL(307, sys_recvmmsg, 5)
 
-#define __NR_syscall_count			307
+#define __NR_syscall_count			308
 
 /*
  * sysxtensa syscall handler
diff --git a/block/Kconfig b/block/Kconfig
index 9be0b56..e20fbde 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -77,6 +77,28 @@
 	T10/SCSI Data Integrity Field or the T13/ATA External Path
 	Protection.  If in doubt, say N.
 
+config BLK_CGROUP
+	bool
+	depends on CGROUPS
+	default n
+	---help---
+	Generic block IO controller cgroup interface. This is the common
+	cgroup interface which should be used by various IO controlling
+	policies.
+
+	Currently, CFQ IO scheduler uses it to recognize task groups and
+	control disk bandwidth allocation (proportional time slice allocation)
+	to such task groups.
+
+config DEBUG_BLK_CGROUP
+	bool
+	depends on BLK_CGROUP
+	default n
+	---help---
+	Enable some debugging help. Currently it stores the cgroup path
+	in the blk group which can be used by cfq for tracing various
+	group related activity.
+
 endif # BLOCK
 
 config BLOCK_COMPAT
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 7e803fc8..b71abfb 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -12,24 +12,14 @@
 	  that do their own scheduling and require only minimal assistance from
 	  the kernel.
 
-config IOSCHED_AS
-	tristate "Anticipatory I/O scheduler"
-	default y
-	---help---
-	  The anticipatory I/O scheduler is generally a good choice for most
-	  environments, but is quite large and complex when compared to the
-	  deadline I/O scheduler, it can also be slower in some cases
-	  especially some database loads.
-
 config IOSCHED_DEADLINE
 	tristate "Deadline I/O scheduler"
 	default y
 	---help---
-	  The deadline I/O scheduler is simple and compact, and is often as
-	  good as the anticipatory I/O scheduler, and in some database
-	  workloads, better. In the case of a single process performing I/O to
-	  a disk at any one time, its behaviour is almost identical to the
-	  anticipatory I/O scheduler and so is a good choice.
+	  The deadline I/O scheduler is simple and compact. It will provide
+	  CSCAN service with FIFO expiration of requests, switching to
+	  a new point in the service tree and doing a batch of IO from there
+	  in case of expiry.
 
 config IOSCHED_CFQ
 	tristate "CFQ I/O scheduler"
@@ -37,9 +27,28 @@
 	---help---
 	  The CFQ I/O scheduler tries to distribute bandwidth equally
 	  among all processes in the system. It should provide a fair
-	  working environment, suitable for desktop systems.
+	  and low latency working environment, suitable for both desktop
+	  and server systems.
+
 	  This is the default I/O scheduler.
 
+config CFQ_GROUP_IOSCHED
+	bool "CFQ Group Scheduling support"
+	depends on IOSCHED_CFQ && CGROUPS
+	select BLK_CGROUP
+	default n
+	---help---
+	  Enable group IO scheduling in CFQ.
+
+config DEBUG_CFQ_IOSCHED
+	bool "Debug CFQ Scheduling"
+	depends on CFQ_GROUP_IOSCHED
+	select DEBUG_BLK_CGROUP
+	default n
+	---help---
+	  Enable CFQ IO scheduling debugging in CFQ. Currently it makes
+	  blktrace output more verbose.
+
 choice
 	prompt "Default I/O scheduler"
 	default DEFAULT_CFQ
@@ -47,9 +56,6 @@
 	  Select the I/O scheduler which will be used by default for all
 	  block devices.
 
-	config DEFAULT_AS
-		bool "Anticipatory" if IOSCHED_AS=y
-
 	config DEFAULT_DEADLINE
 		bool "Deadline" if IOSCHED_DEADLINE=y
 
@@ -63,7 +69,6 @@
 
 config DEFAULT_IOSCHED
 	string
-	default "anticipatory" if DEFAULT_AS
 	default "deadline" if DEFAULT_DEADLINE
 	default "cfq" if DEFAULT_CFQ
 	default "noop" if DEFAULT_NOOP
diff --git a/block/Makefile b/block/Makefile
index ba74ca6..cb2d515 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -8,8 +8,8 @@
 			blk-iopoll.o ioctl.o genhd.o scsi_ioctl.o
 
 obj-$(CONFIG_BLK_DEV_BSG)	+= bsg.o
+obj-$(CONFIG_BLK_CGROUP)	+= blk-cgroup.o
 obj-$(CONFIG_IOSCHED_NOOP)	+= noop-iosched.o
-obj-$(CONFIG_IOSCHED_AS)	+= as-iosched.o
 obj-$(CONFIG_IOSCHED_DEADLINE)	+= deadline-iosched.o
 obj-$(CONFIG_IOSCHED_CFQ)	+= cfq-iosched.o
 
diff --git a/block/as-iosched.c b/block/as-iosched.c
deleted file mode 100644
index ce8ba57..0000000
--- a/block/as-iosched.c
+++ /dev/null
@@ -1,1520 +0,0 @@
-/*
- *  Anticipatory & deadline i/o scheduler.
- *
- *  Copyright (C) 2002 Jens Axboe <axboe@kernel.dk>
- *                     Nick Piggin <nickpiggin@yahoo.com.au>
- *
- */
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/blkdev.h>
-#include <linux/elevator.h>
-#include <linux/bio.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/compiler.h>
-#include <linux/rbtree.h>
-#include <linux/interrupt.h>
-
-/*
- * See Documentation/block/as-iosched.txt
- */
-
-/*
- * max time before a read is submitted.
- */
-#define default_read_expire (HZ / 8)
-
-/*
- * ditto for writes, these limits are not hard, even
- * if the disk is capable of satisfying them.
- */
-#define default_write_expire (HZ / 4)
-
-/*
- * read_batch_expire describes how long we will allow a stream of reads to
- * persist before looking to see whether it is time to switch over to writes.
- */
-#define default_read_batch_expire (HZ / 2)
-
-/*
- * write_batch_expire describes how long we want a stream of writes to run for.
- * This is not a hard limit, but a target we set for the auto-tuning thingy.
- * See, the problem is: we can send a lot of writes to disk cache / TCQ in
- * a short amount of time...
- */
-#define default_write_batch_expire (HZ / 8)
-
-/*
- * max time we may wait to anticipate a read (default around 6ms)
- */
-#define default_antic_expire ((HZ / 150) ? HZ / 150 : 1)
-
-/*
- * Keep track of up to 20ms thinktimes. We can go as big as we like here,
- * however huge values tend to interfere and not decay fast enough. A program
- * might be in a non-io phase of operation. Waiting on user input for example,
- * or doing a lengthy computation. A small penalty can be justified there, and
- * will still catch out those processes that constantly have large thinktimes.
- */
-#define MAX_THINKTIME (HZ/50UL)
-
-/* Bits in as_io_context.state */
-enum as_io_states {
-	AS_TASK_RUNNING=0,	/* Process has not exited */
-	AS_TASK_IOSTARTED,	/* Process has started some IO */
-	AS_TASK_IORUNNING,	/* Process has completed some IO */
-};
-
-enum anticipation_status {
-	ANTIC_OFF=0,		/* Not anticipating (normal operation)	*/
-	ANTIC_WAIT_REQ,		/* The last read has not yet completed  */
-	ANTIC_WAIT_NEXT,	/* Currently anticipating a request vs
-				   last read (which has completed) */
-	ANTIC_FINISHED,		/* Anticipating but have found a candidate
-				 * or timed out */
-};
-
-struct as_data {
-	/*
-	 * run time data
-	 */
-
-	struct request_queue *q;	/* the "owner" queue */
-
-	/*
-	 * requests (as_rq s) are present on both sort_list and fifo_list
-	 */
-	struct rb_root sort_list[2];
-	struct list_head fifo_list[2];
-
-	struct request *next_rq[2];	/* next in sort order */
-	sector_t last_sector[2];	/* last SYNC & ASYNC sectors */
-
-	unsigned long exit_prob;	/* probability a task will exit while
-					   being waited on */
-	unsigned long exit_no_coop;	/* probablility an exited task will
-					   not be part of a later cooperating
-					   request */
-	unsigned long new_ttime_total; 	/* mean thinktime on new proc */
-	unsigned long new_ttime_mean;
-	u64 new_seek_total;		/* mean seek on new proc */
-	sector_t new_seek_mean;
-
-	unsigned long current_batch_expires;
-	unsigned long last_check_fifo[2];
-	int changed_batch;		/* 1: waiting for old batch to end */
-	int new_batch;			/* 1: waiting on first read complete */
-	int batch_data_dir;		/* current batch SYNC / ASYNC */
-	int write_batch_count;		/* max # of reqs in a write batch */
-	int current_write_count;	/* how many requests left this batch */
-	int write_batch_idled;		/* has the write batch gone idle? */
-
-	enum anticipation_status antic_status;
-	unsigned long antic_start;	/* jiffies: when it started */
-	struct timer_list antic_timer;	/* anticipatory scheduling timer */
-	struct work_struct antic_work;	/* Deferred unplugging */
-	struct io_context *io_context;	/* Identify the expected process */
-	int ioc_finished; /* IO associated with io_context is finished */
-	int nr_dispatched;
-
-	/*
-	 * settings that change how the i/o scheduler behaves
-	 */
-	unsigned long fifo_expire[2];
-	unsigned long batch_expire[2];
-	unsigned long antic_expire;
-};
-
-/*
- * per-request data.
- */
-enum arq_state {
-	AS_RQ_NEW=0,		/* New - not referenced and not on any lists */
-	AS_RQ_QUEUED,		/* In the request queue. It belongs to the
-				   scheduler */
-	AS_RQ_DISPATCHED,	/* On the dispatch list. It belongs to the
-				   driver now */
-	AS_RQ_PRESCHED,		/* Debug poisoning for requests being used */
-	AS_RQ_REMOVED,
-	AS_RQ_MERGED,
-	AS_RQ_POSTSCHED,	/* when they shouldn't be */
-};
-
-#define RQ_IOC(rq)	((struct io_context *) (rq)->elevator_private)
-#define RQ_STATE(rq)	((enum arq_state)(rq)->elevator_private2)
-#define RQ_SET_STATE(rq, state)	((rq)->elevator_private2 = (void *) state)
-
-static DEFINE_PER_CPU(unsigned long, as_ioc_count);
-static struct completion *ioc_gone;
-static DEFINE_SPINLOCK(ioc_gone_lock);
-
-static void as_move_to_dispatch(struct as_data *ad, struct request *rq);
-static void as_antic_stop(struct as_data *ad);
-
-/*
- * IO Context helper functions
- */
-
-/* Called to deallocate the as_io_context */
-static void free_as_io_context(struct as_io_context *aic)
-{
-	kfree(aic);
-	elv_ioc_count_dec(as_ioc_count);
-	if (ioc_gone) {
-		/*
-		 * AS scheduler is exiting, grab exit lock and check
-		 * the pending io context count. If it hits zero,
-		 * complete ioc_gone and set it back to NULL.
-		 */
-		spin_lock(&ioc_gone_lock);
-		if (ioc_gone && !elv_ioc_count_read(as_ioc_count)) {
-			complete(ioc_gone);
-			ioc_gone = NULL;
-		}
-		spin_unlock(&ioc_gone_lock);
-	}
-}
-
-static void as_trim(struct io_context *ioc)
-{
-	spin_lock_irq(&ioc->lock);
-	if (ioc->aic)
-		free_as_io_context(ioc->aic);
-	ioc->aic = NULL;
-	spin_unlock_irq(&ioc->lock);
-}
-
-/* Called when the task exits */
-static void exit_as_io_context(struct as_io_context *aic)
-{
-	WARN_ON(!test_bit(AS_TASK_RUNNING, &aic->state));
-	clear_bit(AS_TASK_RUNNING, &aic->state);
-}
-
-static struct as_io_context *alloc_as_io_context(void)
-{
-	struct as_io_context *ret;
-
-	ret = kmalloc(sizeof(*ret), GFP_ATOMIC);
-	if (ret) {
-		ret->dtor = free_as_io_context;
-		ret->exit = exit_as_io_context;
-		ret->state = 1 << AS_TASK_RUNNING;
-		atomic_set(&ret->nr_queued, 0);
-		atomic_set(&ret->nr_dispatched, 0);
-		spin_lock_init(&ret->lock);
-		ret->ttime_total = 0;
-		ret->ttime_samples = 0;
-		ret->ttime_mean = 0;
-		ret->seek_total = 0;
-		ret->seek_samples = 0;
-		ret->seek_mean = 0;
-		elv_ioc_count_inc(as_ioc_count);
-	}
-
-	return ret;
-}
-
-/*
- * If the current task has no AS IO context then create one and initialise it.
- * Then take a ref on the task's io context and return it.
- */
-static struct io_context *as_get_io_context(int node)
-{
-	struct io_context *ioc = get_io_context(GFP_ATOMIC, node);
-	if (ioc && !ioc->aic) {
-		ioc->aic = alloc_as_io_context();
-		if (!ioc->aic) {
-			put_io_context(ioc);
-			ioc = NULL;
-		}
-	}
-	return ioc;
-}
-
-static void as_put_io_context(struct request *rq)
-{
-	struct as_io_context *aic;
-
-	if (unlikely(!RQ_IOC(rq)))
-		return;
-
-	aic = RQ_IOC(rq)->aic;
-
-	if (rq_is_sync(rq) && aic) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&aic->lock, flags);
-		set_bit(AS_TASK_IORUNNING, &aic->state);
-		aic->last_end_request = jiffies;
-		spin_unlock_irqrestore(&aic->lock, flags);
-	}
-
-	put_io_context(RQ_IOC(rq));
-}
-
-/*
- * rb tree support functions
- */
-#define RQ_RB_ROOT(ad, rq)	(&(ad)->sort_list[rq_is_sync((rq))])
-
-static void as_add_rq_rb(struct as_data *ad, struct request *rq)
-{
-	struct request *alias;
-
-	while ((unlikely(alias = elv_rb_add(RQ_RB_ROOT(ad, rq), rq)))) {
-		as_move_to_dispatch(ad, alias);
-		as_antic_stop(ad);
-	}
-}
-
-static inline void as_del_rq_rb(struct as_data *ad, struct request *rq)
-{
-	elv_rb_del(RQ_RB_ROOT(ad, rq), rq);
-}
-
-/*
- * IO Scheduler proper
- */
-
-#define MAXBACK (1024 * 1024)	/*
-				 * Maximum distance the disk will go backward
-				 * for a request.
-				 */
-
-#define BACK_PENALTY	2
-
-/*
- * as_choose_req selects the preferred one of two requests of the same data_dir
- * ignoring time - eg. timeouts, which is the job of as_dispatch_request
- */
-static struct request *
-as_choose_req(struct as_data *ad, struct request *rq1, struct request *rq2)
-{
-	int data_dir;
-	sector_t last, s1, s2, d1, d2;
-	int r1_wrap=0, r2_wrap=0;	/* requests are behind the disk head */
-	const sector_t maxback = MAXBACK;
-
-	if (rq1 == NULL || rq1 == rq2)
-		return rq2;
-	if (rq2 == NULL)
-		return rq1;
-
-	data_dir = rq_is_sync(rq1);
-
-	last = ad->last_sector[data_dir];
-	s1 = blk_rq_pos(rq1);
-	s2 = blk_rq_pos(rq2);
-
-	BUG_ON(data_dir != rq_is_sync(rq2));
-
-	/*
-	 * Strict one way elevator _except_ in the case where we allow
-	 * short backward seeks which are biased as twice the cost of a
-	 * similar forward seek.
-	 */
-	if (s1 >= last)
-		d1 = s1 - last;
-	else if (s1+maxback >= last)
-		d1 = (last - s1)*BACK_PENALTY;
-	else {
-		r1_wrap = 1;
-		d1 = 0; /* shut up, gcc */
-	}
-
-	if (s2 >= last)
-		d2 = s2 - last;
-	else if (s2+maxback >= last)
-		d2 = (last - s2)*BACK_PENALTY;
-	else {
-		r2_wrap = 1;
-		d2 = 0;
-	}
-
-	/* Found required data */
-	if (!r1_wrap && r2_wrap)
-		return rq1;
-	else if (!r2_wrap && r1_wrap)
-		return rq2;
-	else if (r1_wrap && r2_wrap) {
-		/* both behind the head */
-		if (s1 <= s2)
-			return rq1;
-		else
-			return rq2;
-	}
-
-	/* Both requests in front of the head */
-	if (d1 < d2)
-		return rq1;
-	else if (d2 < d1)
-		return rq2;
-	else {
-		if (s1 >= s2)
-			return rq1;
-		else
-			return rq2;
-	}
-}
-
-/*
- * as_find_next_rq finds the next request after @prev in elevator order.
- * this with as_choose_req form the basis for how the scheduler chooses
- * what request to process next. Anticipation works on top of this.
- */
-static struct request *
-as_find_next_rq(struct as_data *ad, struct request *last)
-{
-	struct rb_node *rbnext = rb_next(&last->rb_node);
-	struct rb_node *rbprev = rb_prev(&last->rb_node);
-	struct request *next = NULL, *prev = NULL;
-
-	BUG_ON(RB_EMPTY_NODE(&last->rb_node));
-
-	if (rbprev)
-		prev = rb_entry_rq(rbprev);
-
-	if (rbnext)
-		next = rb_entry_rq(rbnext);
-	else {
-		const int data_dir = rq_is_sync(last);
-
-		rbnext = rb_first(&ad->sort_list[data_dir]);
-		if (rbnext && rbnext != &last->rb_node)
-			next = rb_entry_rq(rbnext);
-	}
-
-	return as_choose_req(ad, next, prev);
-}
-
-/*
- * anticipatory scheduling functions follow
- */
-
-/*
- * as_antic_expired tells us when we have anticipated too long.
- * The funny "absolute difference" math on the elapsed time is to handle
- * jiffy wraps, and disks which have been idle for 0x80000000 jiffies.
- */
-static int as_antic_expired(struct as_data *ad)
-{
-	long delta_jif;
-
-	delta_jif = jiffies - ad->antic_start;
-	if (unlikely(delta_jif < 0))
-		delta_jif = -delta_jif;
-	if (delta_jif < ad->antic_expire)
-		return 0;
-
-	return 1;
-}
-
-/*
- * as_antic_waitnext starts anticipating that a nice request will soon be
- * submitted. See also as_antic_waitreq
- */
-static void as_antic_waitnext(struct as_data *ad)
-{
-	unsigned long timeout;
-
-	BUG_ON(ad->antic_status != ANTIC_OFF
-			&& ad->antic_status != ANTIC_WAIT_REQ);
-
-	timeout = ad->antic_start + ad->antic_expire;
-
-	mod_timer(&ad->antic_timer, timeout);
-
-	ad->antic_status = ANTIC_WAIT_NEXT;
-}
-
-/*
- * as_antic_waitreq starts anticipating. We don't start timing the anticipation
- * until the request that we're anticipating on has finished. This means we
- * are timing from when the candidate process wakes up hopefully.
- */
-static void as_antic_waitreq(struct as_data *ad)
-{
-	BUG_ON(ad->antic_status == ANTIC_FINISHED);
-	if (ad->antic_status == ANTIC_OFF) {
-		if (!ad->io_context || ad->ioc_finished)
-			as_antic_waitnext(ad);
-		else
-			ad->antic_status = ANTIC_WAIT_REQ;
-	}
-}
-
-/*
- * This is called directly by the functions in this file to stop anticipation.
- * We kill the timer and schedule a call to the request_fn asap.
- */
-static void as_antic_stop(struct as_data *ad)
-{
-	int status = ad->antic_status;
-
-	if (status == ANTIC_WAIT_REQ || status == ANTIC_WAIT_NEXT) {
-		if (status == ANTIC_WAIT_NEXT)
-			del_timer(&ad->antic_timer);
-		ad->antic_status = ANTIC_FINISHED;
-		/* see as_work_handler */
-		kblockd_schedule_work(ad->q, &ad->antic_work);
-	}
-}
-
-/*
- * as_antic_timeout is the timer function set by as_antic_waitnext.
- */
-static void as_antic_timeout(unsigned long data)
-{
-	struct request_queue *q = (struct request_queue *)data;
-	struct as_data *ad = q->elevator->elevator_data;
-	unsigned long flags;
-
-	spin_lock_irqsave(q->queue_lock, flags);
-	if (ad->antic_status == ANTIC_WAIT_REQ
-			|| ad->antic_status == ANTIC_WAIT_NEXT) {
-		struct as_io_context *aic;
-		spin_lock(&ad->io_context->lock);
-		aic = ad->io_context->aic;
-
-		ad->antic_status = ANTIC_FINISHED;
-		kblockd_schedule_work(q, &ad->antic_work);
-
-		if (aic->ttime_samples == 0) {
-			/* process anticipated on has exited or timed out*/
-			ad->exit_prob = (7*ad->exit_prob + 256)/8;
-		}
-		if (!test_bit(AS_TASK_RUNNING, &aic->state)) {
-			/* process not "saved" by a cooperating request */
-			ad->exit_no_coop = (7*ad->exit_no_coop + 256)/8;
-		}
-		spin_unlock(&ad->io_context->lock);
-	}
-	spin_unlock_irqrestore(q->queue_lock, flags);
-}
-
-static void as_update_thinktime(struct as_data *ad, struct as_io_context *aic,
-				unsigned long ttime)
-{
-	/* fixed point: 1.0 == 1<<8 */
-	if (aic->ttime_samples == 0) {
-		ad->new_ttime_total = (7*ad->new_ttime_total + 256*ttime) / 8;
-		ad->new_ttime_mean = ad->new_ttime_total / 256;
-
-		ad->exit_prob = (7*ad->exit_prob)/8;
-	}
-	aic->ttime_samples = (7*aic->ttime_samples + 256) / 8;
-	aic->ttime_total = (7*aic->ttime_total + 256*ttime) / 8;
-	aic->ttime_mean = (aic->ttime_total + 128) / aic->ttime_samples;
-}
-
-static void as_update_seekdist(struct as_data *ad, struct as_io_context *aic,
-				sector_t sdist)
-{
-	u64 total;
-
-	if (aic->seek_samples == 0) {
-		ad->new_seek_total = (7*ad->new_seek_total + 256*(u64)sdist)/8;
-		ad->new_seek_mean = ad->new_seek_total / 256;
-	}
-
-	/*
-	 * Don't allow the seek distance to get too large from the
-	 * odd fragment, pagein, etc
-	 */
-	if (aic->seek_samples <= 60) /* second&third seek */
-		sdist = min(sdist, (aic->seek_mean * 4) + 2*1024*1024);
-	else
-		sdist = min(sdist, (aic->seek_mean * 4)	+ 2*1024*64);
-
-	aic->seek_samples = (7*aic->seek_samples + 256) / 8;
-	aic->seek_total = (7*aic->seek_total + (u64)256*sdist) / 8;
-	total = aic->seek_total + (aic->seek_samples/2);
-	do_div(total, aic->seek_samples);
-	aic->seek_mean = (sector_t)total;
-}
-
-/*
- * as_update_iohist keeps a decaying histogram of IO thinktimes, and
- * updates @aic->ttime_mean based on that. It is called when a new
- * request is queued.
- */
-static void as_update_iohist(struct as_data *ad, struct as_io_context *aic,
-				struct request *rq)
-{
-	int data_dir = rq_is_sync(rq);
-	unsigned long thinktime = 0;
-	sector_t seek_dist;
-
-	if (aic == NULL)
-		return;
-
-	if (data_dir == BLK_RW_SYNC) {
-		unsigned long in_flight = atomic_read(&aic->nr_queued)
-					+ atomic_read(&aic->nr_dispatched);
-		spin_lock(&aic->lock);
-		if (test_bit(AS_TASK_IORUNNING, &aic->state) ||
-			test_bit(AS_TASK_IOSTARTED, &aic->state)) {
-			/* Calculate read -> read thinktime */
-			if (test_bit(AS_TASK_IORUNNING, &aic->state)
-							&& in_flight == 0) {
-				thinktime = jiffies - aic->last_end_request;
-				thinktime = min(thinktime, MAX_THINKTIME-1);
-			}
-			as_update_thinktime(ad, aic, thinktime);
-
-			/* Calculate read -> read seek distance */
-			if (aic->last_request_pos < blk_rq_pos(rq))
-				seek_dist = blk_rq_pos(rq) -
-					    aic->last_request_pos;
-			else
-				seek_dist = aic->last_request_pos -
-					    blk_rq_pos(rq);
-			as_update_seekdist(ad, aic, seek_dist);
-		}
-		aic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
-		set_bit(AS_TASK_IOSTARTED, &aic->state);
-		spin_unlock(&aic->lock);
-	}
-}
-
-/*
- * as_close_req decides if one request is considered "close" to the
- * previous one issued.
- */
-static int as_close_req(struct as_data *ad, struct as_io_context *aic,
-			struct request *rq)
-{
-	unsigned long delay;	/* jiffies */
-	sector_t last = ad->last_sector[ad->batch_data_dir];
-	sector_t next = blk_rq_pos(rq);
-	sector_t delta; /* acceptable close offset (in sectors) */
-	sector_t s;
-
-	if (ad->antic_status == ANTIC_OFF || !ad->ioc_finished)
-		delay = 0;
-	else
-		delay = jiffies - ad->antic_start;
-
-	if (delay == 0)
-		delta = 8192;
-	else if (delay <= (20 * HZ / 1000) && delay <= ad->antic_expire)
-		delta = 8192 << delay;
-	else
-		return 1;
-
-	if ((last <= next + (delta>>1)) && (next <= last + delta))
-		return 1;
-
-	if (last < next)
-		s = next - last;
-	else
-		s = last - next;
-
-	if (aic->seek_samples == 0) {
-		/*
-		 * Process has just started IO. Use past statistics to
-		 * gauge success possibility
-		 */
-		if (ad->new_seek_mean > s) {
-			/* this request is better than what we're expecting */
-			return 1;
-		}
-
-	} else {
-		if (aic->seek_mean > s) {
-			/* this request is better than what we're expecting */
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * as_can_break_anticipation returns true if we have been anticipating this
- * request.
- *
- * It also returns true if the process against which we are anticipating
- * submits a write - that's presumably an fsync, O_SYNC write, etc. We want to
- * dispatch it ASAP, because we know that application will not be submitting
- * any new reads.
- *
- * If the task which has submitted the request has exited, break anticipation.
- *
- * If this task has queued some other IO, do not enter enticipation.
- */
-static int as_can_break_anticipation(struct as_data *ad, struct request *rq)
-{
-	struct io_context *ioc;
-	struct as_io_context *aic;
-
-	ioc = ad->io_context;
-	BUG_ON(!ioc);
-	spin_lock(&ioc->lock);
-
-	if (rq && ioc == RQ_IOC(rq)) {
-		/* request from same process */
-		spin_unlock(&ioc->lock);
-		return 1;
-	}
-
-	if (ad->ioc_finished && as_antic_expired(ad)) {
-		/*
-		 * In this situation status should really be FINISHED,
-		 * however the timer hasn't had the chance to run yet.
-		 */
-		spin_unlock(&ioc->lock);
-		return 1;
-	}
-
-	aic = ioc->aic;
-	if (!aic) {
-		spin_unlock(&ioc->lock);
-		return 0;
-	}
-
-	if (atomic_read(&aic->nr_queued) > 0) {
-		/* process has more requests queued */
-		spin_unlock(&ioc->lock);
-		return 1;
-	}
-
-	if (atomic_read(&aic->nr_dispatched) > 0) {
-		/* process has more requests dispatched */
-		spin_unlock(&ioc->lock);
-		return 1;
-	}
-
-	if (rq && rq_is_sync(rq) && as_close_req(ad, aic, rq)) {
-		/*
-		 * Found a close request that is not one of ours.
-		 *
-		 * This makes close requests from another process update
-		 * our IO history. Is generally useful when there are
-		 * two or more cooperating processes working in the same
-		 * area.
-		 */
-		if (!test_bit(AS_TASK_RUNNING, &aic->state)) {
-			if (aic->ttime_samples == 0)
-				ad->exit_prob = (7*ad->exit_prob + 256)/8;
-
-			ad->exit_no_coop = (7*ad->exit_no_coop)/8;
-		}
-
-		as_update_iohist(ad, aic, rq);
-		spin_unlock(&ioc->lock);
-		return 1;
-	}
-
-	if (!test_bit(AS_TASK_RUNNING, &aic->state)) {
-		/* process anticipated on has exited */
-		if (aic->ttime_samples == 0)
-			ad->exit_prob = (7*ad->exit_prob + 256)/8;
-
-		if (ad->exit_no_coop > 128) {
-			spin_unlock(&ioc->lock);
-			return 1;
-		}
-	}
-
-	if (aic->ttime_samples == 0) {
-		if (ad->new_ttime_mean > ad->antic_expire) {
-			spin_unlock(&ioc->lock);
-			return 1;
-		}
-		if (ad->exit_prob * ad->exit_no_coop > 128*256) {
-			spin_unlock(&ioc->lock);
-			return 1;
-		}
-	} else if (aic->ttime_mean > ad->antic_expire) {
-		/* the process thinks too much between requests */
-		spin_unlock(&ioc->lock);
-		return 1;
-	}
-	spin_unlock(&ioc->lock);
-	return 0;
-}
-
-/*
- * as_can_anticipate indicates whether we should either run rq
- * or keep anticipating a better request.
- */
-static int as_can_anticipate(struct as_data *ad, struct request *rq)
-{
-#if 0 /* disable for now, we need to check tag level as well */
-	/*
-	 * SSD device without seek penalty, disable idling
-	 */
-	if (blk_queue_nonrot(ad->q)) axman
-		return 0;
-#endif
-
-	if (!ad->io_context)
-		/*
-		 * Last request submitted was a write
-		 */
-		return 0;
-
-	if (ad->antic_status == ANTIC_FINISHED)
-		/*
-		 * Don't restart if we have just finished. Run the next request
-		 */
-		return 0;
-
-	if (as_can_break_anticipation(ad, rq))
-		/*
-		 * This request is a good candidate. Don't keep anticipating,
-		 * run it.
-		 */
-		return 0;
-
-	/*
-	 * OK from here, we haven't finished, and don't have a decent request!
-	 * Status is either ANTIC_OFF so start waiting,
-	 * ANTIC_WAIT_REQ so continue waiting for request to finish
-	 * or ANTIC_WAIT_NEXT so continue waiting for an acceptable request.
-	 */
-
-	return 1;
-}
-
-/*
- * as_update_rq must be called whenever a request (rq) is added to
- * the sort_list. This function keeps caches up to date, and checks if the
- * request might be one we are "anticipating"
- */
-static void as_update_rq(struct as_data *ad, struct request *rq)
-{
-	const int data_dir = rq_is_sync(rq);
-
-	/* keep the next_rq cache up to date */
-	ad->next_rq[data_dir] = as_choose_req(ad, rq, ad->next_rq[data_dir]);
-
-	/*
-	 * have we been anticipating this request?
-	 * or does it come from the same process as the one we are anticipating
-	 * for?
-	 */
-	if (ad->antic_status == ANTIC_WAIT_REQ
-			|| ad->antic_status == ANTIC_WAIT_NEXT) {
-		if (as_can_break_anticipation(ad, rq))
-			as_antic_stop(ad);
-	}
-}
-
-/*
- * Gathers timings and resizes the write batch automatically
- */
-static void update_write_batch(struct as_data *ad)
-{
-	unsigned long batch = ad->batch_expire[BLK_RW_ASYNC];
-	long write_time;
-
-	write_time = (jiffies - ad->current_batch_expires) + batch;
-	if (write_time < 0)
-		write_time = 0;
-
-	if (write_time > batch && !ad->write_batch_idled) {
-		if (write_time > batch * 3)
-			ad->write_batch_count /= 2;
-		else
-			ad->write_batch_count--;
-	} else if (write_time < batch && ad->current_write_count == 0) {
-		if (batch > write_time * 3)
-			ad->write_batch_count *= 2;
-		else
-			ad->write_batch_count++;
-	}
-
-	if (ad->write_batch_count < 1)
-		ad->write_batch_count = 1;
-}
-
-/*
- * as_completed_request is to be called when a request has completed and
- * returned something to the requesting process, be it an error or data.
- */
-static void as_completed_request(struct request_queue *q, struct request *rq)
-{
-	struct as_data *ad = q->elevator->elevator_data;
-
-	WARN_ON(!list_empty(&rq->queuelist));
-
-	if (RQ_STATE(rq) != AS_RQ_REMOVED) {
-		WARN(1, "rq->state %d\n", RQ_STATE(rq));
-		goto out;
-	}
-
-	if (ad->changed_batch && ad->nr_dispatched == 1) {
-		ad->current_batch_expires = jiffies +
-					ad->batch_expire[ad->batch_data_dir];
-		kblockd_schedule_work(q, &ad->antic_work);
-		ad->changed_batch = 0;
-
-		if (ad->batch_data_dir == BLK_RW_SYNC)
-			ad->new_batch = 1;
-	}
-	WARN_ON(ad->nr_dispatched == 0);
-	ad->nr_dispatched--;
-
-	/*
-	 * Start counting the batch from when a request of that direction is
-	 * actually serviced. This should help devices with big TCQ windows
-	 * and writeback caches
-	 */
-	if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) {
-		update_write_batch(ad);
-		ad->current_batch_expires = jiffies +
-				ad->batch_expire[BLK_RW_SYNC];
-		ad->new_batch = 0;
-	}
-
-	if (ad->io_context == RQ_IOC(rq) && ad->io_context) {
-		ad->antic_start = jiffies;
-		ad->ioc_finished = 1;
-		if (ad->antic_status == ANTIC_WAIT_REQ) {
-			/*
-			 * We were waiting on this request, now anticipate
-			 * the next one
-			 */
-			as_antic_waitnext(ad);
-		}
-	}
-
-	as_put_io_context(rq);
-out:
-	RQ_SET_STATE(rq, AS_RQ_POSTSCHED);
-}
-
-/*
- * as_remove_queued_request removes a request from the pre dispatch queue
- * without updating refcounts. It is expected the caller will drop the
- * reference unless it replaces the request at somepart of the elevator
- * (ie. the dispatch queue)
- */
-static void as_remove_queued_request(struct request_queue *q,
-				     struct request *rq)
-{
-	const int data_dir = rq_is_sync(rq);
-	struct as_data *ad = q->elevator->elevator_data;
-	struct io_context *ioc;
-
-	WARN_ON(RQ_STATE(rq) != AS_RQ_QUEUED);
-
-	ioc = RQ_IOC(rq);
-	if (ioc && ioc->aic) {
-		BUG_ON(!atomic_read(&ioc->aic->nr_queued));
-		atomic_dec(&ioc->aic->nr_queued);
-	}
-
-	/*
-	 * Update the "next_rq" cache if we are about to remove its
-	 * entry
-	 */
-	if (ad->next_rq[data_dir] == rq)
-		ad->next_rq[data_dir] = as_find_next_rq(ad, rq);
-
-	rq_fifo_clear(rq);
-	as_del_rq_rb(ad, rq);
-}
-
-/*
- * as_fifo_expired returns 0 if there are no expired requests on the fifo,
- * 1 otherwise.  It is ratelimited so that we only perform the check once per
- * `fifo_expire' interval.  Otherwise a large number of expired requests
- * would create a hopeless seekstorm.
- *
- * See as_antic_expired comment.
- */
-static int as_fifo_expired(struct as_data *ad, int adir)
-{
-	struct request *rq;
-	long delta_jif;
-
-	delta_jif = jiffies - ad->last_check_fifo[adir];
-	if (unlikely(delta_jif < 0))
-		delta_jif = -delta_jif;
-	if (delta_jif < ad->fifo_expire[adir])
-		return 0;
-
-	ad->last_check_fifo[adir] = jiffies;
-
-	if (list_empty(&ad->fifo_list[adir]))
-		return 0;
-
-	rq = rq_entry_fifo(ad->fifo_list[adir].next);
-
-	return time_after(jiffies, rq_fifo_time(rq));
-}
-
-/*
- * as_batch_expired returns true if the current batch has expired. A batch
- * is a set of reads or a set of writes.
- */
-static inline int as_batch_expired(struct as_data *ad)
-{
-	if (ad->changed_batch || ad->new_batch)
-		return 0;
-
-	if (ad->batch_data_dir == BLK_RW_SYNC)
-		/* TODO! add a check so a complete fifo gets written? */
-		return time_after(jiffies, ad->current_batch_expires);
-
-	return time_after(jiffies, ad->current_batch_expires)
-		|| ad->current_write_count == 0;
-}
-
-/*
- * move an entry to dispatch queue
- */
-static void as_move_to_dispatch(struct as_data *ad, struct request *rq)
-{
-	const int data_dir = rq_is_sync(rq);
-
-	BUG_ON(RB_EMPTY_NODE(&rq->rb_node));
-
-	as_antic_stop(ad);
-	ad->antic_status = ANTIC_OFF;
-
-	/*
-	 * This has to be set in order to be correctly updated by
-	 * as_find_next_rq
-	 */
-	ad->last_sector[data_dir] = blk_rq_pos(rq) + blk_rq_sectors(rq);
-
-	if (data_dir == BLK_RW_SYNC) {
-		struct io_context *ioc = RQ_IOC(rq);
-		/* In case we have to anticipate after this */
-		copy_io_context(&ad->io_context, &ioc);
-	} else {
-		if (ad->io_context) {
-			put_io_context(ad->io_context);
-			ad->io_context = NULL;
-		}
-
-		if (ad->current_write_count != 0)
-			ad->current_write_count--;
-	}
-	ad->ioc_finished = 0;
-
-	ad->next_rq[data_dir] = as_find_next_rq(ad, rq);
-
-	/*
-	 * take it off the sort and fifo list, add to dispatch queue
-	 */
-	as_remove_queued_request(ad->q, rq);
-	WARN_ON(RQ_STATE(rq) != AS_RQ_QUEUED);
-
-	elv_dispatch_sort(ad->q, rq);
-
-	RQ_SET_STATE(rq, AS_RQ_DISPATCHED);
-	if (RQ_IOC(rq) && RQ_IOC(rq)->aic)
-		atomic_inc(&RQ_IOC(rq)->aic->nr_dispatched);
-	ad->nr_dispatched++;
-}
-
-/*
- * as_dispatch_request selects the best request according to
- * read/write expire, batch expire, etc, and moves it to the dispatch
- * queue. Returns 1 if a request was found, 0 otherwise.
- */
-static int as_dispatch_request(struct request_queue *q, int force)
-{
-	struct as_data *ad = q->elevator->elevator_data;
-	const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]);
-	const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]);
-	struct request *rq;
-
-	if (unlikely(force)) {
-		/*
-		 * Forced dispatch, accounting is useless.  Reset
-		 * accounting states and dump fifo_lists.  Note that
-		 * batch_data_dir is reset to BLK_RW_SYNC to avoid
-		 * screwing write batch accounting as write batch
-		 * accounting occurs on W->R transition.
-		 */
-		int dispatched = 0;
-
-		ad->batch_data_dir = BLK_RW_SYNC;
-		ad->changed_batch = 0;
-		ad->new_batch = 0;
-
-		while (ad->next_rq[BLK_RW_SYNC]) {
-			as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]);
-			dispatched++;
-		}
-		ad->last_check_fifo[BLK_RW_SYNC] = jiffies;
-
-		while (ad->next_rq[BLK_RW_ASYNC]) {
-			as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]);
-			dispatched++;
-		}
-		ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
-
-		return dispatched;
-	}
-
-	/* Signal that the write batch was uncontended, so we can't time it */
-	if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) {
-		if (ad->current_write_count == 0 || !writes)
-			ad->write_batch_idled = 1;
-	}
-
-	if (!(reads || writes)
-		|| ad->antic_status == ANTIC_WAIT_REQ
-		|| ad->antic_status == ANTIC_WAIT_NEXT
-		|| ad->changed_batch)
-		return 0;
-
-	if (!(reads && writes && as_batch_expired(ad))) {
-		/*
-		 * batch is still running or no reads or no writes
-		 */
-		rq = ad->next_rq[ad->batch_data_dir];
-
-		if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) {
-			if (as_fifo_expired(ad, BLK_RW_SYNC))
-				goto fifo_expired;
-
-			if (as_can_anticipate(ad, rq)) {
-				as_antic_waitreq(ad);
-				return 0;
-			}
-		}
-
-		if (rq) {
-			/* we have a "next request" */
-			if (reads && !writes)
-				ad->current_batch_expires =
-					jiffies + ad->batch_expire[BLK_RW_SYNC];
-			goto dispatch_request;
-		}
-	}
-
-	/*
-	 * at this point we are not running a batch. select the appropriate
-	 * data direction (read / write)
-	 */
-
-	if (reads) {
-		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC]));
-
-		if (writes && ad->batch_data_dir == BLK_RW_SYNC)
-			/*
-			 * Last batch was a read, switch to writes
-			 */
-			goto dispatch_writes;
-
-		if (ad->batch_data_dir == BLK_RW_ASYNC) {
-			WARN_ON(ad->new_batch);
-			ad->changed_batch = 1;
-		}
-		ad->batch_data_dir = BLK_RW_SYNC;
-		rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next);
-		ad->last_check_fifo[ad->batch_data_dir] = jiffies;
-		goto dispatch_request;
-	}
-
-	/*
-	 * the last batch was a read
-	 */
-
-	if (writes) {
-dispatch_writes:
-		BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC]));
-
-		if (ad->batch_data_dir == BLK_RW_SYNC) {
-			ad->changed_batch = 1;
-
-			/*
-			 * new_batch might be 1 when the queue runs out of
-			 * reads. A subsequent submission of a write might
-			 * cause a change of batch before the read is finished.
-			 */
-			ad->new_batch = 0;
-		}
-		ad->batch_data_dir = BLK_RW_ASYNC;
-		ad->current_write_count = ad->write_batch_count;
-		ad->write_batch_idled = 0;
-		rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next);
-		ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
-		goto dispatch_request;
-	}
-
-	BUG();
-	return 0;
-
-dispatch_request:
-	/*
-	 * If a request has expired, service it.
-	 */
-
-	if (as_fifo_expired(ad, ad->batch_data_dir)) {
-fifo_expired:
-		rq = rq_entry_fifo(ad->fifo_list[ad->batch_data_dir].next);
-	}
-
-	if (ad->changed_batch) {
-		WARN_ON(ad->new_batch);
-
-		if (ad->nr_dispatched)
-			return 0;
-
-		if (ad->batch_data_dir == BLK_RW_ASYNC)
-			ad->current_batch_expires = jiffies +
-					ad->batch_expire[BLK_RW_ASYNC];
-		else
-			ad->new_batch = 1;
-
-		ad->changed_batch = 0;
-	}
-
-	/*
-	 * rq is the selected appropriate request.
-	 */
-	as_move_to_dispatch(ad, rq);
-
-	return 1;
-}
-
-/*
- * add rq to rbtree and fifo
- */
-static void as_add_request(struct request_queue *q, struct request *rq)
-{
-	struct as_data *ad = q->elevator->elevator_data;
-	int data_dir;
-
-	RQ_SET_STATE(rq, AS_RQ_NEW);
-
-	data_dir = rq_is_sync(rq);
-
-	rq->elevator_private = as_get_io_context(q->node);
-
-	if (RQ_IOC(rq)) {
-		as_update_iohist(ad, RQ_IOC(rq)->aic, rq);
-		atomic_inc(&RQ_IOC(rq)->aic->nr_queued);
-	}
-
-	as_add_rq_rb(ad, rq);
-
-	/*
-	 * set expire time and add to fifo list
-	 */
-	rq_set_fifo_time(rq, jiffies + ad->fifo_expire[data_dir]);
-	list_add_tail(&rq->queuelist, &ad->fifo_list[data_dir]);
-
-	as_update_rq(ad, rq); /* keep state machine up to date */
-	RQ_SET_STATE(rq, AS_RQ_QUEUED);
-}
-
-static void as_activate_request(struct request_queue *q, struct request *rq)
-{
-	WARN_ON(RQ_STATE(rq) != AS_RQ_DISPATCHED);
-	RQ_SET_STATE(rq, AS_RQ_REMOVED);
-	if (RQ_IOC(rq) && RQ_IOC(rq)->aic)
-		atomic_dec(&RQ_IOC(rq)->aic->nr_dispatched);
-}
-
-static void as_deactivate_request(struct request_queue *q, struct request *rq)
-{
-	WARN_ON(RQ_STATE(rq) != AS_RQ_REMOVED);
-	RQ_SET_STATE(rq, AS_RQ_DISPATCHED);
-	if (RQ_IOC(rq) && RQ_IOC(rq)->aic)
-		atomic_inc(&RQ_IOC(rq)->aic->nr_dispatched);
-}
-
-/*
- * as_queue_empty tells us if there are requests left in the device. It may
- * not be the case that a driver can get the next request even if the queue
- * is not empty - it is used in the block layer to check for plugging and
- * merging opportunities
- */
-static int as_queue_empty(struct request_queue *q)
-{
-	struct as_data *ad = q->elevator->elevator_data;
-
-	return list_empty(&ad->fifo_list[BLK_RW_ASYNC])
-		&& list_empty(&ad->fifo_list[BLK_RW_SYNC]);
-}
-
-static int
-as_merge(struct request_queue *q, struct request **req, struct bio *bio)
-{
-	struct as_data *ad = q->elevator->elevator_data;
-	sector_t rb_key = bio->bi_sector + bio_sectors(bio);
-	struct request *__rq;
-
-	/*
-	 * check for front merge
-	 */
-	__rq = elv_rb_find(&ad->sort_list[bio_data_dir(bio)], rb_key);
-	if (__rq && elv_rq_merge_ok(__rq, bio)) {
-		*req = __rq;
-		return ELEVATOR_FRONT_MERGE;
-	}
-
-	return ELEVATOR_NO_MERGE;
-}
-
-static void as_merged_request(struct request_queue *q, struct request *req,
-			      int type)
-{
-	struct as_data *ad = q->elevator->elevator_data;
-
-	/*
-	 * if the merge was a front merge, we need to reposition request
-	 */
-	if (type == ELEVATOR_FRONT_MERGE) {
-		as_del_rq_rb(ad, req);
-		as_add_rq_rb(ad, req);
-		/*
-		 * Note! At this stage of this and the next function, our next
-		 * request may not be optimal - eg the request may have "grown"
-		 * behind the disk head. We currently don't bother adjusting.
-		 */
-	}
-}
-
-static void as_merged_requests(struct request_queue *q, struct request *req,
-			 	struct request *next)
-{
-	/*
-	 * if next expires before rq, assign its expire time to arq
-	 * and move into next position (next will be deleted) in fifo
-	 */
-	if (!list_empty(&req->queuelist) && !list_empty(&next->queuelist)) {
-		if (time_before(rq_fifo_time(next), rq_fifo_time(req))) {
-			list_move(&req->queuelist, &next->queuelist);
-			rq_set_fifo_time(req, rq_fifo_time(next));
-		}
-	}
-
-	/*
-	 * kill knowledge of next, this one is a goner
-	 */
-	as_remove_queued_request(q, next);
-	as_put_io_context(next);
-
-	RQ_SET_STATE(next, AS_RQ_MERGED);
-}
-
-/*
- * This is executed in a "deferred" process context, by kblockd. It calls the
- * driver's request_fn so the driver can submit that request.
- *
- * IMPORTANT! This guy will reenter the elevator, so set up all queue global
- * state before calling, and don't rely on any state over calls.
- *
- * FIXME! dispatch queue is not a queue at all!
- */
-static void as_work_handler(struct work_struct *work)
-{
-	struct as_data *ad = container_of(work, struct as_data, antic_work);
-
-	blk_run_queue(ad->q);
-}
-
-static int as_may_queue(struct request_queue *q, int rw)
-{
-	int ret = ELV_MQUEUE_MAY;
-	struct as_data *ad = q->elevator->elevator_data;
-	struct io_context *ioc;
-	if (ad->antic_status == ANTIC_WAIT_REQ ||
-			ad->antic_status == ANTIC_WAIT_NEXT) {
-		ioc = as_get_io_context(q->node);
-		if (ad->io_context == ioc)
-			ret = ELV_MQUEUE_MUST;
-		put_io_context(ioc);
-	}
-
-	return ret;
-}
-
-static void as_exit_queue(struct elevator_queue *e)
-{
-	struct as_data *ad = e->elevator_data;
-
-	del_timer_sync(&ad->antic_timer);
-	cancel_work_sync(&ad->antic_work);
-
-	BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC]));
-	BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC]));
-
-	put_io_context(ad->io_context);
-	kfree(ad);
-}
-
-/*
- * initialize elevator private data (as_data).
- */
-static void *as_init_queue(struct request_queue *q)
-{
-	struct as_data *ad;
-
-	ad = kmalloc_node(sizeof(*ad), GFP_KERNEL | __GFP_ZERO, q->node);
-	if (!ad)
-		return NULL;
-
-	ad->q = q; /* Identify what queue the data belongs to */
-
-	/* anticipatory scheduling helpers */
-	ad->antic_timer.function = as_antic_timeout;
-	ad->antic_timer.data = (unsigned long)q;
-	init_timer(&ad->antic_timer);
-	INIT_WORK(&ad->antic_work, as_work_handler);
-
-	INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]);
-	INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]);
-	ad->sort_list[BLK_RW_SYNC] = RB_ROOT;
-	ad->sort_list[BLK_RW_ASYNC] = RB_ROOT;
-	ad->fifo_expire[BLK_RW_SYNC] = default_read_expire;
-	ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire;
-	ad->antic_expire = default_antic_expire;
-	ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire;
-	ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire;
-
-	ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC];
-	ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10;
-	if (ad->write_batch_count < 2)
-		ad->write_batch_count = 2;
-
-	return ad;
-}
-
-/*
- * sysfs parts below
- */
-
-static ssize_t
-as_var_show(unsigned int var, char *page)
-{
-	return sprintf(page, "%d\n", var);
-}
-
-static ssize_t
-as_var_store(unsigned long *var, const char *page, size_t count)
-{
-	char *p = (char *) page;
-
-	*var = simple_strtoul(p, &p, 10);
-	return count;
-}
-
-static ssize_t est_time_show(struct elevator_queue *e, char *page)
-{
-	struct as_data *ad = e->elevator_data;
-	int pos = 0;
-
-	pos += sprintf(page+pos, "%lu %% exit probability\n",
-				100*ad->exit_prob/256);
-	pos += sprintf(page+pos, "%lu %% probability of exiting without a "
-				"cooperating process submitting IO\n",
-				100*ad->exit_no_coop/256);
-	pos += sprintf(page+pos, "%lu ms new thinktime\n", ad->new_ttime_mean);
-	pos += sprintf(page+pos, "%llu sectors new seek distance\n",
-				(unsigned long long)ad->new_seek_mean);
-
-	return pos;
-}
-
-#define SHOW_FUNCTION(__FUNC, __VAR)				\
-static ssize_t __FUNC(struct elevator_queue *e, char *page)	\
-{								\
-	struct as_data *ad = e->elevator_data;			\
-	return as_var_show(jiffies_to_msecs((__VAR)), (page));	\
-}
-SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]);
-SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]);
-SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire);
-SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]);
-SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]);
-#undef SHOW_FUNCTION
-
-#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX)				\
-static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count)	\
-{									\
-	struct as_data *ad = e->elevator_data;				\
-	int ret = as_var_store(__PTR, (page), count);			\
-	if (*(__PTR) < (MIN))						\
-		*(__PTR) = (MIN);					\
-	else if (*(__PTR) > (MAX))					\
-		*(__PTR) = (MAX);					\
-	*(__PTR) = msecs_to_jiffies(*(__PTR));				\
-	return ret;							\
-}
-STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_expire_store,
-			&ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX);
-STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX);
-STORE_FUNCTION(as_read_batch_expire_store,
-			&ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_batch_expire_store,
-			&ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX);
-#undef STORE_FUNCTION
-
-#define AS_ATTR(name) \
-	__ATTR(name, S_IRUGO|S_IWUSR, as_##name##_show, as_##name##_store)
-
-static struct elv_fs_entry as_attrs[] = {
-	__ATTR_RO(est_time),
-	AS_ATTR(read_expire),
-	AS_ATTR(write_expire),
-	AS_ATTR(antic_expire),
-	AS_ATTR(read_batch_expire),
-	AS_ATTR(write_batch_expire),
-	__ATTR_NULL
-};
-
-static struct elevator_type iosched_as = {
-	.ops = {
-		.elevator_merge_fn = 		as_merge,
-		.elevator_merged_fn =		as_merged_request,
-		.elevator_merge_req_fn =	as_merged_requests,
-		.elevator_dispatch_fn =		as_dispatch_request,
-		.elevator_add_req_fn =		as_add_request,
-		.elevator_activate_req_fn =	as_activate_request,
-		.elevator_deactivate_req_fn = 	as_deactivate_request,
-		.elevator_queue_empty_fn =	as_queue_empty,
-		.elevator_completed_req_fn =	as_completed_request,
-		.elevator_former_req_fn =	elv_rb_former_request,
-		.elevator_latter_req_fn =	elv_rb_latter_request,
-		.elevator_may_queue_fn =	as_may_queue,
-		.elevator_init_fn =		as_init_queue,
-		.elevator_exit_fn =		as_exit_queue,
-		.trim =				as_trim,
-	},
-
-	.elevator_attrs = as_attrs,
-	.elevator_name = "anticipatory",
-	.elevator_owner = THIS_MODULE,
-};
-
-static int __init as_init(void)
-{
-	elv_register(&iosched_as);
-
-	return 0;
-}
-
-static void __exit as_exit(void)
-{
-	DECLARE_COMPLETION_ONSTACK(all_gone);
-	elv_unregister(&iosched_as);
-	ioc_gone = &all_gone;
-	/* ioc_gone's update must be visible before reading ioc_count */
-	smp_wmb();
-	if (elv_ioc_count_read(as_ioc_count))
-		wait_for_completion(&all_gone);
-	synchronize_rcu();
-}
-
-module_init(as_init);
-module_exit(as_exit);
-
-MODULE_AUTHOR("Nick Piggin");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("anticipatory IO scheduler");
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
new file mode 100644
index 0000000..1fa2654
--- /dev/null
+++ b/block/blk-cgroup.c
@@ -0,0 +1,361 @@
+/*
+ * Common Block IO controller cgroup interface
+ *
+ * Based on ideas and code from CFQ, CFS and BFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2009 Vivek Goyal <vgoyal@redhat.com>
+ * 	              Nauman Rafique <nauman@google.com>
+ */
+#include <linux/ioprio.h>
+#include <linux/seq_file.h>
+#include <linux/kdev_t.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include "blk-cgroup.h"
+
+static DEFINE_SPINLOCK(blkio_list_lock);
+static LIST_HEAD(blkio_list);
+
+struct blkio_cgroup blkio_root_cgroup = { .weight = 2*BLKIO_WEIGHT_DEFAULT };
+EXPORT_SYMBOL_GPL(blkio_root_cgroup);
+
+bool blkiocg_css_tryget(struct blkio_cgroup *blkcg)
+{
+	if (!css_tryget(&blkcg->css))
+		return false;
+	return true;
+}
+EXPORT_SYMBOL_GPL(blkiocg_css_tryget);
+
+void blkiocg_css_put(struct blkio_cgroup *blkcg)
+{
+	css_put(&blkcg->css);
+}
+EXPORT_SYMBOL_GPL(blkiocg_css_put);
+
+struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup)
+{
+	return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id),
+			    struct blkio_cgroup, css);
+}
+EXPORT_SYMBOL_GPL(cgroup_to_blkio_cgroup);
+
+void blkiocg_update_blkio_group_stats(struct blkio_group *blkg,
+			unsigned long time, unsigned long sectors)
+{
+	blkg->time += time;
+	blkg->sectors += sectors;
+}
+EXPORT_SYMBOL_GPL(blkiocg_update_blkio_group_stats);
+
+void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&blkcg->lock, flags);
+	rcu_assign_pointer(blkg->key, key);
+	blkg->blkcg_id = css_id(&blkcg->css);
+	hlist_add_head_rcu(&blkg->blkcg_node, &blkcg->blkg_list);
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+#ifdef CONFIG_DEBUG_BLK_CGROUP
+	/* Need to take css reference ? */
+	cgroup_path(blkcg->css.cgroup, blkg->path, sizeof(blkg->path));
+#endif
+	blkg->dev = dev;
+}
+EXPORT_SYMBOL_GPL(blkiocg_add_blkio_group);
+
+static void __blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	hlist_del_init_rcu(&blkg->blkcg_node);
+	blkg->blkcg_id = 0;
+}
+
+/*
+ * returns 0 if blkio_group was still on cgroup list. Otherwise returns 1
+ * indicating that blk_group was unhashed by the time we got to it.
+ */
+int blkiocg_del_blkio_group(struct blkio_group *blkg)
+{
+	struct blkio_cgroup *blkcg;
+	unsigned long flags;
+	struct cgroup_subsys_state *css;
+	int ret = 1;
+
+	rcu_read_lock();
+	css = css_lookup(&blkio_subsys, blkg->blkcg_id);
+	if (!css)
+		goto out;
+
+	blkcg = container_of(css, struct blkio_cgroup, css);
+	spin_lock_irqsave(&blkcg->lock, flags);
+	if (!hlist_unhashed(&blkg->blkcg_node)) {
+		__blkiocg_del_blkio_group(blkg);
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+out:
+	rcu_read_unlock();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(blkiocg_del_blkio_group);
+
+/* called under rcu_read_lock(). */
+struct blkio_group *blkiocg_lookup_group(struct blkio_cgroup *blkcg, void *key)
+{
+	struct blkio_group *blkg;
+	struct hlist_node *n;
+	void *__key;
+
+	hlist_for_each_entry_rcu(blkg, n, &blkcg->blkg_list, blkcg_node) {
+		__key = blkg->key;
+		if (__key == key)
+			return blkg;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(blkiocg_lookup_group);
+
+#define SHOW_FUNCTION(__VAR)						\
+static u64 blkiocg_##__VAR##_read(struct cgroup *cgroup,		\
+				       struct cftype *cftype)		\
+{									\
+	struct blkio_cgroup *blkcg;					\
+									\
+	blkcg = cgroup_to_blkio_cgroup(cgroup);				\
+	return (u64)blkcg->__VAR;					\
+}
+
+SHOW_FUNCTION(weight);
+#undef SHOW_FUNCTION
+
+static int
+blkiocg_weight_write(struct cgroup *cgroup, struct cftype *cftype, u64 val)
+{
+	struct blkio_cgroup *blkcg;
+	struct blkio_group *blkg;
+	struct hlist_node *n;
+	struct blkio_policy_type *blkiop;
+
+	if (val < BLKIO_WEIGHT_MIN || val > BLKIO_WEIGHT_MAX)
+		return -EINVAL;
+
+	blkcg = cgroup_to_blkio_cgroup(cgroup);
+	spin_lock_irq(&blkcg->lock);
+	blkcg->weight = (unsigned int)val;
+	hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) {
+		spin_lock(&blkio_list_lock);
+		list_for_each_entry(blkiop, &blkio_list, list)
+			blkiop->ops.blkio_update_group_weight_fn(blkg,
+					blkcg->weight);
+		spin_unlock(&blkio_list_lock);
+	}
+	spin_unlock_irq(&blkcg->lock);
+	return 0;
+}
+
+#define SHOW_FUNCTION_PER_GROUP(__VAR)					\
+static int blkiocg_##__VAR##_read(struct cgroup *cgroup,		\
+			struct cftype *cftype, struct seq_file *m)	\
+{									\
+	struct blkio_cgroup *blkcg;					\
+	struct blkio_group *blkg;					\
+	struct hlist_node *n;						\
+									\
+	if (!cgroup_lock_live_group(cgroup))				\
+		return -ENODEV;						\
+									\
+	blkcg = cgroup_to_blkio_cgroup(cgroup);				\
+	rcu_read_lock();						\
+	hlist_for_each_entry_rcu(blkg, n, &blkcg->blkg_list, blkcg_node) {\
+		if (blkg->dev)						\
+			seq_printf(m, "%u:%u %lu\n", MAJOR(blkg->dev),	\
+				 MINOR(blkg->dev), blkg->__VAR);	\
+	}								\
+	rcu_read_unlock();						\
+	cgroup_unlock();						\
+	return 0;							\
+}
+
+SHOW_FUNCTION_PER_GROUP(time);
+SHOW_FUNCTION_PER_GROUP(sectors);
+#ifdef CONFIG_DEBUG_BLK_CGROUP
+SHOW_FUNCTION_PER_GROUP(dequeue);
+#endif
+#undef SHOW_FUNCTION_PER_GROUP
+
+#ifdef CONFIG_DEBUG_BLK_CGROUP
+void blkiocg_update_blkio_group_dequeue_stats(struct blkio_group *blkg,
+			unsigned long dequeue)
+{
+	blkg->dequeue += dequeue;
+}
+EXPORT_SYMBOL_GPL(blkiocg_update_blkio_group_dequeue_stats);
+#endif
+
+struct cftype blkio_files[] = {
+	{
+		.name = "weight",
+		.read_u64 = blkiocg_weight_read,
+		.write_u64 = blkiocg_weight_write,
+	},
+	{
+		.name = "time",
+		.read_seq_string = blkiocg_time_read,
+	},
+	{
+		.name = "sectors",
+		.read_seq_string = blkiocg_sectors_read,
+	},
+#ifdef CONFIG_DEBUG_BLK_CGROUP
+       {
+		.name = "dequeue",
+		.read_seq_string = blkiocg_dequeue_read,
+       },
+#endif
+};
+
+static int blkiocg_populate(struct cgroup_subsys *subsys, struct cgroup *cgroup)
+{
+	return cgroup_add_files(cgroup, subsys, blkio_files,
+				ARRAY_SIZE(blkio_files));
+}
+
+static void blkiocg_destroy(struct cgroup_subsys *subsys, struct cgroup *cgroup)
+{
+	struct blkio_cgroup *blkcg = cgroup_to_blkio_cgroup(cgroup);
+	unsigned long flags;
+	struct blkio_group *blkg;
+	void *key;
+	struct blkio_policy_type *blkiop;
+
+	rcu_read_lock();
+remove_entry:
+	spin_lock_irqsave(&blkcg->lock, flags);
+
+	if (hlist_empty(&blkcg->blkg_list)) {
+		spin_unlock_irqrestore(&blkcg->lock, flags);
+		goto done;
+	}
+
+	blkg = hlist_entry(blkcg->blkg_list.first, struct blkio_group,
+				blkcg_node);
+	key = rcu_dereference(blkg->key);
+	__blkiocg_del_blkio_group(blkg);
+
+	spin_unlock_irqrestore(&blkcg->lock, flags);
+
+	/*
+	 * This blkio_group is being unlinked as associated cgroup is going
+	 * away. Let all the IO controlling policies know about this event.
+	 *
+	 * Currently this is static call to one io controlling policy. Once
+	 * we have more policies in place, we need some dynamic registration
+	 * of callback function.
+	 */
+	spin_lock(&blkio_list_lock);
+	list_for_each_entry(blkiop, &blkio_list, list)
+		blkiop->ops.blkio_unlink_group_fn(key, blkg);
+	spin_unlock(&blkio_list_lock);
+	goto remove_entry;
+done:
+	free_css_id(&blkio_subsys, &blkcg->css);
+	rcu_read_unlock();
+	kfree(blkcg);
+}
+
+static struct cgroup_subsys_state *
+blkiocg_create(struct cgroup_subsys *subsys, struct cgroup *cgroup)
+{
+	struct blkio_cgroup *blkcg, *parent_blkcg;
+
+	if (!cgroup->parent) {
+		blkcg = &blkio_root_cgroup;
+		goto done;
+	}
+
+	/* Currently we do not support hierarchy deeper than two level (0,1) */
+	parent_blkcg = cgroup_to_blkio_cgroup(cgroup->parent);
+	if (css_depth(&parent_blkcg->css) > 0)
+		return ERR_PTR(-EINVAL);
+
+	blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL);
+	if (!blkcg)
+		return ERR_PTR(-ENOMEM);
+
+	blkcg->weight = BLKIO_WEIGHT_DEFAULT;
+done:
+	spin_lock_init(&blkcg->lock);
+	INIT_HLIST_HEAD(&blkcg->blkg_list);
+
+	return &blkcg->css;
+}
+
+/*
+ * We cannot support shared io contexts, as we have no mean to support
+ * two tasks with the same ioc in two different groups without major rework
+ * of the main cic data structures.  For now we allow a task to change
+ * its cgroup only if it's the only owner of its ioc.
+ */
+static int blkiocg_can_attach(struct cgroup_subsys *subsys,
+				struct cgroup *cgroup, struct task_struct *tsk,
+				bool threadgroup)
+{
+	struct io_context *ioc;
+	int ret = 0;
+
+	/* task_lock() is needed to avoid races with exit_io_context() */
+	task_lock(tsk);
+	ioc = tsk->io_context;
+	if (ioc && atomic_read(&ioc->nr_tasks) > 1)
+		ret = -EINVAL;
+	task_unlock(tsk);
+
+	return ret;
+}
+
+static void blkiocg_attach(struct cgroup_subsys *subsys, struct cgroup *cgroup,
+				struct cgroup *prev, struct task_struct *tsk,
+				bool threadgroup)
+{
+	struct io_context *ioc;
+
+	task_lock(tsk);
+	ioc = tsk->io_context;
+	if (ioc)
+		ioc->cgroup_changed = 1;
+	task_unlock(tsk);
+}
+
+struct cgroup_subsys blkio_subsys = {
+	.name = "blkio",
+	.create = blkiocg_create,
+	.can_attach = blkiocg_can_attach,
+	.attach = blkiocg_attach,
+	.destroy = blkiocg_destroy,
+	.populate = blkiocg_populate,
+	.subsys_id = blkio_subsys_id,
+	.use_id = 1,
+};
+
+void blkio_policy_register(struct blkio_policy_type *blkiop)
+{
+	spin_lock(&blkio_list_lock);
+	list_add_tail(&blkiop->list, &blkio_list);
+	spin_unlock(&blkio_list_lock);
+}
+EXPORT_SYMBOL_GPL(blkio_policy_register);
+
+void blkio_policy_unregister(struct blkio_policy_type *blkiop)
+{
+	spin_lock(&blkio_list_lock);
+	list_del_init(&blkiop->list);
+	spin_unlock(&blkio_list_lock);
+}
+EXPORT_SYMBOL_GPL(blkio_policy_unregister);
diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h
new file mode 100644
index 0000000..4d316df
--- /dev/null
+++ b/block/blk-cgroup.h
@@ -0,0 +1,127 @@
+#ifndef _BLK_CGROUP_H
+#define _BLK_CGROUP_H
+/*
+ * Common Block IO controller cgroup interface
+ *
+ * Based on ideas and code from CFQ, CFS and BFQ:
+ * Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
+ *
+ * Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
+ *		      Paolo Valente <paolo.valente@unimore.it>
+ *
+ * Copyright (C) 2009 Vivek Goyal <vgoyal@redhat.com>
+ * 	              Nauman Rafique <nauman@google.com>
+ */
+
+#include <linux/cgroup.h>
+
+#ifdef CONFIG_BLK_CGROUP
+
+struct blkio_cgroup {
+	struct cgroup_subsys_state css;
+	unsigned int weight;
+	spinlock_t lock;
+	struct hlist_head blkg_list;
+};
+
+struct blkio_group {
+	/* An rcu protected unique identifier for the group */
+	void *key;
+	struct hlist_node blkcg_node;
+	unsigned short blkcg_id;
+#ifdef CONFIG_DEBUG_BLK_CGROUP
+	/* Store cgroup path */
+	char path[128];
+	/* How many times this group has been removed from service tree */
+	unsigned long dequeue;
+#endif
+	/* The device MKDEV(major, minor), this group has been created for */
+	dev_t   dev;
+
+	/* total disk time and nr sectors dispatched by this group */
+	unsigned long time;
+	unsigned long sectors;
+};
+
+extern bool blkiocg_css_tryget(struct blkio_cgroup *blkcg);
+extern void blkiocg_css_put(struct blkio_cgroup *blkcg);
+
+typedef void (blkio_unlink_group_fn) (void *key, struct blkio_group *blkg);
+typedef void (blkio_update_group_weight_fn) (struct blkio_group *blkg,
+						unsigned int weight);
+
+struct blkio_policy_ops {
+	blkio_unlink_group_fn *blkio_unlink_group_fn;
+	blkio_update_group_weight_fn *blkio_update_group_weight_fn;
+};
+
+struct blkio_policy_type {
+	struct list_head list;
+	struct blkio_policy_ops ops;
+};
+
+/* Blkio controller policy registration */
+extern void blkio_policy_register(struct blkio_policy_type *);
+extern void blkio_policy_unregister(struct blkio_policy_type *);
+
+#else
+
+struct blkio_group {
+};
+
+struct blkio_policy_type {
+};
+
+static inline void blkio_policy_register(struct blkio_policy_type *blkiop) { }
+static inline void blkio_policy_unregister(struct blkio_policy_type *blkiop) { }
+
+#endif
+
+#define BLKIO_WEIGHT_MIN	100
+#define BLKIO_WEIGHT_MAX	1000
+#define BLKIO_WEIGHT_DEFAULT	500
+
+#ifdef CONFIG_DEBUG_BLK_CGROUP
+static inline char *blkg_path(struct blkio_group *blkg)
+{
+	return blkg->path;
+}
+void blkiocg_update_blkio_group_dequeue_stats(struct blkio_group *blkg,
+				unsigned long dequeue);
+#else
+static inline char *blkg_path(struct blkio_group *blkg) { return NULL; }
+static inline void blkiocg_update_blkio_group_dequeue_stats(
+			struct blkio_group *blkg, unsigned long dequeue) {}
+#endif
+
+#ifdef CONFIG_BLK_CGROUP
+extern struct blkio_cgroup blkio_root_cgroup;
+extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup);
+extern void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev);
+extern int blkiocg_del_blkio_group(struct blkio_group *blkg);
+extern struct blkio_group *blkiocg_lookup_group(struct blkio_cgroup *blkcg,
+						void *key);
+void blkiocg_update_blkio_group_stats(struct blkio_group *blkg,
+			unsigned long time, unsigned long sectors);
+#else
+struct cgroup;
+static inline struct blkio_cgroup *
+cgroup_to_blkio_cgroup(struct cgroup *cgroup) { return NULL; }
+
+static inline void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
+			struct blkio_group *blkg, void *key, dev_t dev)
+{
+}
+
+static inline int
+blkiocg_del_blkio_group(struct blkio_group *blkg) { return 0; }
+
+static inline struct blkio_group *
+blkiocg_lookup_group(struct blkio_cgroup *blkcg, void *key) { return NULL; }
+static inline void blkiocg_update_blkio_group_stats(struct blkio_group *blkg,
+			unsigned long time, unsigned long sectors)
+{
+}
+#endif
+#endif /* _BLK_CGROUP_H */
diff --git a/block/blk-core.c b/block/blk-core.c
index 71da511..718897e6 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -2358,6 +2358,25 @@
 		rq->rq_disk = bio->bi_bdev->bd_disk;
 }
 
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+/**
+ * rq_flush_dcache_pages - Helper function to flush all pages in a request
+ * @rq: the request to be flushed
+ *
+ * Description:
+ *     Flush all pages in @rq.
+ */
+void rq_flush_dcache_pages(struct request *rq)
+{
+	struct req_iterator iter;
+	struct bio_vec *bvec;
+
+	rq_for_each_segment(bvec, rq, iter)
+		flush_dcache_page(bvec->bv_page);
+}
+EXPORT_SYMBOL_GPL(rq_flush_dcache_pages);
+#endif
+
 /**
  * blk_lld_busy - Check if underlying low-level drivers of a device are busy
  * @q : the queue of the device being checked
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index d4ed600..cbdabb0 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -66,22 +66,22 @@
 }
 
 /* Called by the exitting task */
-void exit_io_context(void)
+void exit_io_context(struct task_struct *task)
 {
 	struct io_context *ioc;
 
-	task_lock(current);
-	ioc = current->io_context;
-	current->io_context = NULL;
-	task_unlock(current);
+	task_lock(task);
+	ioc = task->io_context;
+	task->io_context = NULL;
+	task_unlock(task);
 
 	if (atomic_dec_and_test(&ioc->nr_tasks)) {
 		if (ioc->aic && ioc->aic->exit)
 			ioc->aic->exit(ioc->aic);
 		cfq_exit(ioc);
 
-		put_io_context(ioc);
 	}
+	put_io_context(ioc);
 }
 
 struct io_context *alloc_io_context(gfp_t gfp_flags, int node)
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 66d4aa8..dd1f1e0 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -8,6 +8,7 @@
 #include <linux/blkdev.h>
 #include <linux/bootmem.h>	/* for max_pfn/max_low_pfn */
 #include <linux/gcd.h>
+#include <linux/jiffies.h>
 
 #include "blk.h"
 
@@ -96,7 +97,11 @@
 	lim->max_segment_size = MAX_SEGMENT_SIZE;
 	lim->max_sectors = BLK_DEF_MAX_SECTORS;
 	lim->max_hw_sectors = INT_MAX;
-	lim->max_discard_sectors = SAFE_MAX_SECTORS;
+	lim->max_discard_sectors = 0;
+	lim->discard_granularity = 0;
+	lim->discard_alignment = 0;
+	lim->discard_misaligned = 0;
+	lim->discard_zeroes_data = -1;
 	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
 	lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
 	lim->alignment_offset = 0;
@@ -141,7 +146,7 @@
 	q->nr_batching = BLK_BATCH_REQ;
 
 	q->unplug_thresh = 4;		/* hmm */
-	q->unplug_delay = (3 * HZ) / 1000;	/* 3 milliseconds */
+	q->unplug_delay = msecs_to_jiffies(3);	/* 3 milliseconds */
 	if (q->unplug_delay == 0)
 		q->unplug_delay = 1;
 
@@ -488,6 +493,16 @@
 }
 EXPORT_SYMBOL(blk_queue_stack_limits);
 
+static unsigned int lcm(unsigned int a, unsigned int b)
+{
+	if (a && b)
+		return (a * b) / gcd(a, b);
+	else if (b)
+		return b;
+
+	return a;
+}
+
 /**
  * blk_stack_limits - adjust queue_limits for stacked devices
  * @t:	the stacking driver limits (top)
@@ -502,6 +517,10 @@
 int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 		     sector_t offset)
 {
+	int ret;
+
+	ret = 0;
+
 	t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
 	t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
 	t->bounce_pfn = min_not_zero(t->bounce_pfn, b->bounce_pfn);
@@ -526,12 +545,19 @@
 
 	t->io_min = max(t->io_min, b->io_min);
 	t->no_cluster |= b->no_cluster;
+	t->discard_zeroes_data &= b->discard_zeroes_data;
 
 	/* Bottom device offset aligned? */
 	if (offset &&
 	    (offset & (b->physical_block_size - 1)) != b->alignment_offset) {
 		t->misaligned = 1;
-		return -1;
+		ret = -1;
+	}
+
+	if (offset &&
+	    (offset & (b->discard_granularity - 1)) != b->discard_alignment) {
+		t->discard_misaligned = 1;
+		ret = -1;
 	}
 
 	/* If top has no alignment offset, inherit from bottom */
@@ -539,23 +565,26 @@
 		t->alignment_offset =
 			b->alignment_offset & (b->physical_block_size - 1);
 
+	if (!t->discard_alignment)
+		t->discard_alignment =
+			b->discard_alignment & (b->discard_granularity - 1);
+
 	/* Top device aligned on logical block boundary? */
 	if (t->alignment_offset & (t->logical_block_size - 1)) {
 		t->misaligned = 1;
-		return -1;
+		ret = -1;
 	}
 
-	/* Find lcm() of optimal I/O size */
-	if (t->io_opt && b->io_opt)
-		t->io_opt = (t->io_opt * b->io_opt) / gcd(t->io_opt, b->io_opt);
-	else if (b->io_opt)
-		t->io_opt = b->io_opt;
+	/* Find lcm() of optimal I/O size and granularity */
+	t->io_opt = lcm(t->io_opt, b->io_opt);
+	t->discard_granularity = lcm(t->discard_granularity,
+				     b->discard_granularity);
 
 	/* Verify that optimal I/O size is a multiple of io_min */
 	if (t->io_min && t->io_opt % t->io_min)
-		return -1;
+		ret = -1;
 
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(blk_stack_limits);
 
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 8a6d81a..8606c95 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -126,6 +126,21 @@
 	return queue_var_show(queue_io_opt(q), page);
 }
 
+static ssize_t queue_discard_granularity_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(q->limits.discard_granularity, page);
+}
+
+static ssize_t queue_discard_max_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(q->limits.max_discard_sectors << 9, page);
+}
+
+static ssize_t queue_discard_zeroes_data_show(struct request_queue *q, char *page)
+{
+	return queue_var_show(queue_discard_zeroes_data(q), page);
+}
+
 static ssize_t
 queue_max_sectors_store(struct request_queue *q, const char *page, size_t count)
 {
@@ -293,6 +308,21 @@
 	.show = queue_io_opt_show,
 };
 
+static struct queue_sysfs_entry queue_discard_granularity_entry = {
+	.attr = {.name = "discard_granularity", .mode = S_IRUGO },
+	.show = queue_discard_granularity_show,
+};
+
+static struct queue_sysfs_entry queue_discard_max_entry = {
+	.attr = {.name = "discard_max_bytes", .mode = S_IRUGO },
+	.show = queue_discard_max_show,
+};
+
+static struct queue_sysfs_entry queue_discard_zeroes_data_entry = {
+	.attr = {.name = "discard_zeroes_data", .mode = S_IRUGO },
+	.show = queue_discard_zeroes_data_show,
+};
+
 static struct queue_sysfs_entry queue_nonrot_entry = {
 	.attr = {.name = "rotational", .mode = S_IRUGO | S_IWUSR },
 	.show = queue_nonrot_show,
@@ -328,6 +358,9 @@
 	&queue_physical_block_size_entry.attr,
 	&queue_io_min_entry.attr,
 	&queue_io_opt_entry.attr,
+	&queue_discard_granularity_entry.attr,
+	&queue_discard_max_entry.attr,
+	&queue_discard_zeroes_data_entry.attr,
 	&queue_nonrot_entry.attr,
 	&queue_nomerges_entry.attr,
 	&queue_rq_affinity_entry.attr,
diff --git a/block/bsg.c b/block/bsg.c
index 0676301..a9fd2d8 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -15,6 +15,7 @@
 #include <linux/blkdev.h>
 #include <linux/poll.h>
 #include <linux/cdev.h>
+#include <linux/jiffies.h>
 #include <linux/percpu.h>
 #include <linux/uio.h>
 #include <linux/idr.h>
@@ -197,7 +198,7 @@
 	rq->cmd_len = hdr->request_len;
 	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 
-	rq->timeout = (hdr->timeout * HZ) / 1000;
+	rq->timeout = msecs_to_jiffies(hdr->timeout);
 	if (!rq->timeout)
 		rq->timeout = q->sg_timeout;
 	if (!rq->timeout)
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index aa1e953..cfb0b2f 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -9,9 +9,11 @@
 #include <linux/module.h>
 #include <linux/blkdev.h>
 #include <linux/elevator.h>
+#include <linux/jiffies.h>
 #include <linux/rbtree.h>
 #include <linux/ioprio.h>
 #include <linux/blktrace_api.h>
+#include "blk-cgroup.h"
 
 /*
  * tunables
@@ -27,6 +29,8 @@
 static int cfq_slice_async = HZ / 25;
 static const int cfq_slice_async_rq = 2;
 static int cfq_slice_idle = HZ / 125;
+static const int cfq_target_latency = HZ * 3/10; /* 300 ms */
+static const int cfq_hist_divisor = 4;
 
 /*
  * offset from end of service tree
@@ -38,8 +42,15 @@
  */
 #define CFQ_MIN_TT		(2)
 
+/*
+ * Allow merged cfqqs to perform this amount of seeky I/O before
+ * deciding to break the queues up again.
+ */
+#define CFQQ_COOP_TOUT		(HZ)
+
 #define CFQ_SLICE_SCALE		(5)
 #define CFQ_HW_QUEUE_MIN	(5)
+#define CFQ_SERVICE_SHIFT       12
 
 #define RQ_CIC(rq)		\
 	((struct cfq_io_context *) (rq)->elevator_private)
@@ -57,6 +68,7 @@
 #define cfq_class_rt(cfqq)	((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
 
 #define sample_valid(samples)	((samples) > 80)
+#define rb_entry_cfqg(node)	rb_entry((node), struct cfq_group, rb_node)
 
 /*
  * Most of our rbtree usage is for sorting with min extraction, so
@@ -67,8 +79,12 @@
 struct cfq_rb_root {
 	struct rb_root rb;
 	struct rb_node *left;
+	unsigned count;
+	u64 min_vdisktime;
+	struct rb_node *active;
+	unsigned total_weight;
 };
-#define CFQ_RB_ROOT	(struct cfq_rb_root) { RB_ROOT, NULL, }
+#define CFQ_RB_ROOT	(struct cfq_rb_root) { RB_ROOT, NULL, 0, 0, }
 
 /*
  * Per process-grouping structure
@@ -99,6 +115,11 @@
 	/* fifo list of requests in sort_list */
 	struct list_head fifo;
 
+	/* time when queue got scheduled in to dispatch first request. */
+	unsigned long dispatch_start;
+	unsigned int allocated_slice;
+	/* time when first request from queue completed and slice started. */
+	unsigned long slice_start;
 	unsigned long slice_end;
 	long slice_resid;
 	unsigned int slice_dispatch;
@@ -112,7 +133,71 @@
 	unsigned short ioprio, org_ioprio;
 	unsigned short ioprio_class, org_ioprio_class;
 
+	unsigned int seek_samples;
+	u64 seek_total;
+	sector_t seek_mean;
+	sector_t last_request_pos;
+	unsigned long seeky_start;
+
 	pid_t pid;
+
+	struct cfq_rb_root *service_tree;
+	struct cfq_queue *new_cfqq;
+	struct cfq_group *cfqg;
+	struct cfq_group *orig_cfqg;
+	/* Sectors dispatched in current dispatch round */
+	unsigned long nr_sectors;
+};
+
+/*
+ * First index in the service_trees.
+ * IDLE is handled separately, so it has negative index
+ */
+enum wl_prio_t {
+	BE_WORKLOAD = 0,
+	RT_WORKLOAD = 1,
+	IDLE_WORKLOAD = 2,
+};
+
+/*
+ * Second index in the service_trees.
+ */
+enum wl_type_t {
+	ASYNC_WORKLOAD = 0,
+	SYNC_NOIDLE_WORKLOAD = 1,
+	SYNC_WORKLOAD = 2
+};
+
+/* This is per cgroup per device grouping structure */
+struct cfq_group {
+	/* group service_tree member */
+	struct rb_node rb_node;
+
+	/* group service_tree key */
+	u64 vdisktime;
+	unsigned int weight;
+	bool on_st;
+
+	/* number of cfqq currently on this group */
+	int nr_cfqq;
+
+	/* Per group busy queus average. Useful for workload slice calc. */
+	unsigned int busy_queues_avg[2];
+	/*
+	 * rr lists of queues with requests, onle rr for each priority class.
+	 * Counts are embedded in the cfq_rb_root
+	 */
+	struct cfq_rb_root service_trees[2][3];
+	struct cfq_rb_root service_tree_idle;
+
+	unsigned long saved_workload_slice;
+	enum wl_type_t saved_workload;
+	enum wl_prio_t saved_serving_prio;
+	struct blkio_group blkg;
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+	struct hlist_node cfqd_node;
+	atomic_t ref;
+#endif
 };
 
 /*
@@ -120,11 +205,20 @@
  */
 struct cfq_data {
 	struct request_queue *queue;
+	/* Root service tree for cfq_groups */
+	struct cfq_rb_root grp_service_tree;
+	struct cfq_group root_group;
+	/* Number of active cfq groups on group service tree */
+	int nr_groups;
 
 	/*
-	 * rr list of queues with requests and the count of them
+	 * The priority currently being served
 	 */
-	struct cfq_rb_root service_tree;
+	enum wl_prio_t serving_prio;
+	enum wl_type_t serving_type;
+	unsigned long workload_expires;
+	struct cfq_group *serving_group;
+	bool noidle_tree_requires_idle;
 
 	/*
 	 * Each priority tree is sorted by next_request position.  These
@@ -143,8 +237,14 @@
 	 */
 	int rq_queued;
 	int hw_tag;
-	int hw_tag_samples;
-	int rq_in_driver_peak;
+	/*
+	 * hw_tag can be
+	 * -1 => indeterminate, (cfq will behave as if NCQ is present, to allow better detection)
+	 *  1 => NCQ is present (hw_tag_est_depth is the estimated max depth)
+	 *  0 => no NCQ
+	 */
+	int hw_tag_est_depth;
+	unsigned int hw_tag_samples;
 
 	/*
 	 * idle window management
@@ -174,6 +274,7 @@
 	unsigned int cfq_slice_async_rq;
 	unsigned int cfq_slice_idle;
 	unsigned int cfq_latency;
+	unsigned int cfq_group_isolation;
 
 	struct list_head cic_list;
 
@@ -183,8 +284,28 @@
 	struct cfq_queue oom_cfqq;
 
 	unsigned long last_end_sync_rq;
+
+	/* List of cfq groups being managed on this device*/
+	struct hlist_head cfqg_list;
+	struct rcu_head rcu;
 };
 
+static struct cfq_group *cfq_get_next_cfqg(struct cfq_data *cfqd);
+
+static struct cfq_rb_root *service_tree_for(struct cfq_group *cfqg,
+					    enum wl_prio_t prio,
+					    enum wl_type_t type,
+					    struct cfq_data *cfqd)
+{
+	if (!cfqg)
+		return NULL;
+
+	if (prio == IDLE_WORKLOAD)
+		return &cfqg->service_tree_idle;
+
+	return &cfqg->service_trees[prio][type];
+}
+
 enum cfqq_state_flags {
 	CFQ_CFQQ_FLAG_on_rr = 0,	/* on round-robin busy list */
 	CFQ_CFQQ_FLAG_wait_request,	/* waiting for a request */
@@ -195,8 +316,10 @@
 	CFQ_CFQQ_FLAG_prio_changed,	/* task priority has changed */
 	CFQ_CFQQ_FLAG_slice_new,	/* no requests dispatched in slice */
 	CFQ_CFQQ_FLAG_sync,		/* synchronous queue */
-	CFQ_CFQQ_FLAG_coop,		/* has done a coop jump of the queue */
-	CFQ_CFQQ_FLAG_coop_preempt,	/* coop preempt */
+	CFQ_CFQQ_FLAG_coop,		/* cfqq is shared */
+	CFQ_CFQQ_FLAG_deep,		/* sync cfqq experienced large depth */
+	CFQ_CFQQ_FLAG_wait_busy,	/* Waiting for next request */
+	CFQ_CFQQ_FLAG_wait_busy_done,	/* Got new request. Expire the queue */
 };
 
 #define CFQ_CFQQ_FNS(name)						\
@@ -223,14 +346,78 @@
 CFQ_CFQQ_FNS(slice_new);
 CFQ_CFQQ_FNS(sync);
 CFQ_CFQQ_FNS(coop);
-CFQ_CFQQ_FNS(coop_preempt);
+CFQ_CFQQ_FNS(deep);
+CFQ_CFQQ_FNS(wait_busy);
+CFQ_CFQQ_FNS(wait_busy_done);
 #undef CFQ_CFQQ_FNS
 
+#ifdef CONFIG_DEBUG_CFQ_IOSCHED
+#define cfq_log_cfqq(cfqd, cfqq, fmt, args...)	\
+	blk_add_trace_msg((cfqd)->queue, "cfq%d%c %s " fmt, (cfqq)->pid, \
+			cfq_cfqq_sync((cfqq)) ? 'S' : 'A', \
+			blkg_path(&(cfqq)->cfqg->blkg), ##args);
+
+#define cfq_log_cfqg(cfqd, cfqg, fmt, args...)				\
+	blk_add_trace_msg((cfqd)->queue, "%s " fmt,			\
+				blkg_path(&(cfqg)->blkg), ##args);      \
+
+#else
 #define cfq_log_cfqq(cfqd, cfqq, fmt, args...)	\
 	blk_add_trace_msg((cfqd)->queue, "cfq%d " fmt, (cfqq)->pid, ##args)
+#define cfq_log_cfqg(cfqd, cfqg, fmt, args...)		do {} while (0);
+#endif
 #define cfq_log(cfqd, fmt, args...)	\
 	blk_add_trace_msg((cfqd)->queue, "cfq " fmt, ##args)
 
+/* Traverses through cfq group service trees */
+#define for_each_cfqg_st(cfqg, i, j, st) \
+	for (i = 0; i <= IDLE_WORKLOAD; i++) \
+		for (j = 0, st = i < IDLE_WORKLOAD ? &cfqg->service_trees[i][j]\
+			: &cfqg->service_tree_idle; \
+			(i < IDLE_WORKLOAD && j <= SYNC_WORKLOAD) || \
+			(i == IDLE_WORKLOAD && j == 0); \
+			j++, st = i < IDLE_WORKLOAD ? \
+			&cfqg->service_trees[i][j]: NULL) \
+
+
+static inline enum wl_prio_t cfqq_prio(struct cfq_queue *cfqq)
+{
+	if (cfq_class_idle(cfqq))
+		return IDLE_WORKLOAD;
+	if (cfq_class_rt(cfqq))
+		return RT_WORKLOAD;
+	return BE_WORKLOAD;
+}
+
+
+static enum wl_type_t cfqq_type(struct cfq_queue *cfqq)
+{
+	if (!cfq_cfqq_sync(cfqq))
+		return ASYNC_WORKLOAD;
+	if (!cfq_cfqq_idle_window(cfqq))
+		return SYNC_NOIDLE_WORKLOAD;
+	return SYNC_WORKLOAD;
+}
+
+static inline int cfq_group_busy_queues_wl(enum wl_prio_t wl,
+					struct cfq_data *cfqd,
+					struct cfq_group *cfqg)
+{
+	if (wl == IDLE_WORKLOAD)
+		return cfqg->service_tree_idle.count;
+
+	return cfqg->service_trees[wl][ASYNC_WORKLOAD].count
+		+ cfqg->service_trees[wl][SYNC_NOIDLE_WORKLOAD].count
+		+ cfqg->service_trees[wl][SYNC_WORKLOAD].count;
+}
+
+static inline int cfqg_busy_async_queues(struct cfq_data *cfqd,
+					struct cfq_group *cfqg)
+{
+	return cfqg->service_trees[RT_WORKLOAD][ASYNC_WORKLOAD].count
+		+ cfqg->service_trees[BE_WORKLOAD][ASYNC_WORKLOAD].count;
+}
+
 static void cfq_dispatch_insert(struct request_queue *, struct request *);
 static struct cfq_queue *cfq_get_queue(struct cfq_data *, bool,
 				       struct io_context *, gfp_t);
@@ -279,7 +466,7 @@
 {
 	struct cfq_data *cfqd = q->elevator->elevator_data;
 
-	return !cfqd->busy_queues;
+	return !cfqd->rq_queued;
 }
 
 /*
@@ -303,10 +490,110 @@
 	return cfq_prio_slice(cfqd, cfq_cfqq_sync(cfqq), cfqq->ioprio);
 }
 
+static inline u64 cfq_scale_slice(unsigned long delta, struct cfq_group *cfqg)
+{
+	u64 d = delta << CFQ_SERVICE_SHIFT;
+
+	d = d * BLKIO_WEIGHT_DEFAULT;
+	do_div(d, cfqg->weight);
+	return d;
+}
+
+static inline u64 max_vdisktime(u64 min_vdisktime, u64 vdisktime)
+{
+	s64 delta = (s64)(vdisktime - min_vdisktime);
+	if (delta > 0)
+		min_vdisktime = vdisktime;
+
+	return min_vdisktime;
+}
+
+static inline u64 min_vdisktime(u64 min_vdisktime, u64 vdisktime)
+{
+	s64 delta = (s64)(vdisktime - min_vdisktime);
+	if (delta < 0)
+		min_vdisktime = vdisktime;
+
+	return min_vdisktime;
+}
+
+static void update_min_vdisktime(struct cfq_rb_root *st)
+{
+	u64 vdisktime = st->min_vdisktime;
+	struct cfq_group *cfqg;
+
+	if (st->active) {
+		cfqg = rb_entry_cfqg(st->active);
+		vdisktime = cfqg->vdisktime;
+	}
+
+	if (st->left) {
+		cfqg = rb_entry_cfqg(st->left);
+		vdisktime = min_vdisktime(vdisktime, cfqg->vdisktime);
+	}
+
+	st->min_vdisktime = max_vdisktime(st->min_vdisktime, vdisktime);
+}
+
+/*
+ * get averaged number of queues of RT/BE priority.
+ * average is updated, with a formula that gives more weight to higher numbers,
+ * to quickly follows sudden increases and decrease slowly
+ */
+
+static inline unsigned cfq_group_get_avg_queues(struct cfq_data *cfqd,
+					struct cfq_group *cfqg, bool rt)
+{
+	unsigned min_q, max_q;
+	unsigned mult  = cfq_hist_divisor - 1;
+	unsigned round = cfq_hist_divisor / 2;
+	unsigned busy = cfq_group_busy_queues_wl(rt, cfqd, cfqg);
+
+	min_q = min(cfqg->busy_queues_avg[rt], busy);
+	max_q = max(cfqg->busy_queues_avg[rt], busy);
+	cfqg->busy_queues_avg[rt] = (mult * max_q + min_q + round) /
+		cfq_hist_divisor;
+	return cfqg->busy_queues_avg[rt];
+}
+
+static inline unsigned
+cfq_group_slice(struct cfq_data *cfqd, struct cfq_group *cfqg)
+{
+	struct cfq_rb_root *st = &cfqd->grp_service_tree;
+
+	return cfq_target_latency * cfqg->weight / st->total_weight;
+}
+
 static inline void
 cfq_set_prio_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
-	cfqq->slice_end = cfq_prio_to_slice(cfqd, cfqq) + jiffies;
+	unsigned slice = cfq_prio_to_slice(cfqd, cfqq);
+	if (cfqd->cfq_latency) {
+		/*
+		 * interested queues (we consider only the ones with the same
+		 * priority class in the cfq group)
+		 */
+		unsigned iq = cfq_group_get_avg_queues(cfqd, cfqq->cfqg,
+						cfq_class_rt(cfqq));
+		unsigned sync_slice = cfqd->cfq_slice[1];
+		unsigned expect_latency = sync_slice * iq;
+		unsigned group_slice = cfq_group_slice(cfqd, cfqq->cfqg);
+
+		if (expect_latency > group_slice) {
+			unsigned base_low_slice = 2 * cfqd->cfq_slice_idle;
+			/* scale low_slice according to IO priority
+			 * and sync vs async */
+			unsigned low_slice =
+				min(slice, base_low_slice * slice / sync_slice);
+			/* the adapted slice value is scaled to fit all iqs
+			 * into the target latency */
+			slice = max(slice * group_slice / expect_latency,
+				    low_slice);
+		}
+	}
+	cfqq->slice_start = jiffies;
+	cfqq->slice_end = jiffies + slice;
+	cfqq->allocated_slice = slice;
 	cfq_log_cfqq(cfqd, cfqq, "set_slice=%lu", cfqq->slice_end - jiffies);
 }
 
@@ -331,9 +618,9 @@
  * behind the head is penalized and only allowed to a certain extent.
  */
 static struct request *
-cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2)
+cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2, sector_t last)
 {
-	sector_t last, s1, s2, d1 = 0, d2 = 0;
+	sector_t s1, s2, d1 = 0, d2 = 0;
 	unsigned long back_max;
 #define CFQ_RQ1_WRAP	0x01 /* request 1 wraps */
 #define CFQ_RQ2_WRAP	0x02 /* request 2 wraps */
@@ -356,8 +643,6 @@
 	s1 = blk_rq_pos(rq1);
 	s2 = blk_rq_pos(rq2);
 
-	last = cfqd->last_position;
-
 	/*
 	 * by definition, 1KiB is 2 sectors
 	 */
@@ -425,6 +710,10 @@
  */
 static struct cfq_queue *cfq_rb_first(struct cfq_rb_root *root)
 {
+	/* Service tree is empty */
+	if (!root->count)
+		return NULL;
+
 	if (!root->left)
 		root->left = rb_first(&root->rb);
 
@@ -434,6 +723,17 @@
 	return NULL;
 }
 
+static struct cfq_group *cfq_rb_first_group(struct cfq_rb_root *root)
+{
+	if (!root->left)
+		root->left = rb_first(&root->rb);
+
+	if (root->left)
+		return rb_entry_cfqg(root->left);
+
+	return NULL;
+}
+
 static void rb_erase_init(struct rb_node *n, struct rb_root *root)
 {
 	rb_erase(n, root);
@@ -445,6 +745,7 @@
 	if (root->left == n)
 		root->left = NULL;
 	rb_erase_init(n, &root->rb);
+	--root->count;
 }
 
 /*
@@ -471,7 +772,7 @@
 			next = rb_entry_rq(rbnext);
 	}
 
-	return cfq_choose_req(cfqd, next, prev);
+	return cfq_choose_req(cfqd, next, prev, blk_rq_pos(last));
 }
 
 static unsigned long cfq_slice_offset(struct cfq_data *cfqd,
@@ -480,12 +781,336 @@
 	/*
 	 * just an approximation, should be ok.
 	 */
-	return (cfqd->busy_queues - 1) * (cfq_prio_slice(cfqd, 1, 0) -
+	return (cfqq->cfqg->nr_cfqq - 1) * (cfq_prio_slice(cfqd, 1, 0) -
 		       cfq_prio_slice(cfqd, cfq_cfqq_sync(cfqq), cfqq->ioprio));
 }
 
+static inline s64
+cfqg_key(struct cfq_rb_root *st, struct cfq_group *cfqg)
+{
+	return cfqg->vdisktime - st->min_vdisktime;
+}
+
+static void
+__cfq_group_service_tree_add(struct cfq_rb_root *st, struct cfq_group *cfqg)
+{
+	struct rb_node **node = &st->rb.rb_node;
+	struct rb_node *parent = NULL;
+	struct cfq_group *__cfqg;
+	s64 key = cfqg_key(st, cfqg);
+	int left = 1;
+
+	while (*node != NULL) {
+		parent = *node;
+		__cfqg = rb_entry_cfqg(parent);
+
+		if (key < cfqg_key(st, __cfqg))
+			node = &parent->rb_left;
+		else {
+			node = &parent->rb_right;
+			left = 0;
+		}
+	}
+
+	if (left)
+		st->left = &cfqg->rb_node;
+
+	rb_link_node(&cfqg->rb_node, parent, node);
+	rb_insert_color(&cfqg->rb_node, &st->rb);
+}
+
+static void
+cfq_group_service_tree_add(struct cfq_data *cfqd, struct cfq_group *cfqg)
+{
+	struct cfq_rb_root *st = &cfqd->grp_service_tree;
+	struct cfq_group *__cfqg;
+	struct rb_node *n;
+
+	cfqg->nr_cfqq++;
+	if (cfqg->on_st)
+		return;
+
+	/*
+	 * Currently put the group at the end. Later implement something
+	 * so that groups get lesser vtime based on their weights, so that
+	 * if group does not loose all if it was not continously backlogged.
+	 */
+	n = rb_last(&st->rb);
+	if (n) {
+		__cfqg = rb_entry_cfqg(n);
+		cfqg->vdisktime = __cfqg->vdisktime + CFQ_IDLE_DELAY;
+	} else
+		cfqg->vdisktime = st->min_vdisktime;
+
+	__cfq_group_service_tree_add(st, cfqg);
+	cfqg->on_st = true;
+	cfqd->nr_groups++;
+	st->total_weight += cfqg->weight;
+}
+
+static void
+cfq_group_service_tree_del(struct cfq_data *cfqd, struct cfq_group *cfqg)
+{
+	struct cfq_rb_root *st = &cfqd->grp_service_tree;
+
+	if (st->active == &cfqg->rb_node)
+		st->active = NULL;
+
+	BUG_ON(cfqg->nr_cfqq < 1);
+	cfqg->nr_cfqq--;
+
+	/* If there are other cfq queues under this group, don't delete it */
+	if (cfqg->nr_cfqq)
+		return;
+
+	cfq_log_cfqg(cfqd, cfqg, "del_from_rr group");
+	cfqg->on_st = false;
+	cfqd->nr_groups--;
+	st->total_weight -= cfqg->weight;
+	if (!RB_EMPTY_NODE(&cfqg->rb_node))
+		cfq_rb_erase(&cfqg->rb_node, st);
+	cfqg->saved_workload_slice = 0;
+	blkiocg_update_blkio_group_dequeue_stats(&cfqg->blkg, 1);
+}
+
+static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
+{
+	unsigned int slice_used;
+
+	/*
+	 * Queue got expired before even a single request completed or
+	 * got expired immediately after first request completion.
+	 */
+	if (!cfqq->slice_start || cfqq->slice_start == jiffies) {
+		/*
+		 * Also charge the seek time incurred to the group, otherwise
+		 * if there are mutiple queues in the group, each can dispatch
+		 * a single request on seeky media and cause lots of seek time
+		 * and group will never know it.
+		 */
+		slice_used = max_t(unsigned, (jiffies - cfqq->dispatch_start),
+					1);
+	} else {
+		slice_used = jiffies - cfqq->slice_start;
+		if (slice_used > cfqq->allocated_slice)
+			slice_used = cfqq->allocated_slice;
+	}
+
+	cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u sect=%lu", slice_used,
+				cfqq->nr_sectors);
+	return slice_used;
+}
+
+static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
+				struct cfq_queue *cfqq)
+{
+	struct cfq_rb_root *st = &cfqd->grp_service_tree;
+	unsigned int used_sl, charge_sl;
+	int nr_sync = cfqg->nr_cfqq - cfqg_busy_async_queues(cfqd, cfqg)
+			- cfqg->service_tree_idle.count;
+
+	BUG_ON(nr_sync < 0);
+	used_sl = charge_sl = cfq_cfqq_slice_usage(cfqq);
+
+	if (!cfq_cfqq_sync(cfqq) && !nr_sync)
+		charge_sl = cfqq->allocated_slice;
+
+	/* Can't update vdisktime while group is on service tree */
+	cfq_rb_erase(&cfqg->rb_node, st);
+	cfqg->vdisktime += cfq_scale_slice(charge_sl, cfqg);
+	__cfq_group_service_tree_add(st, cfqg);
+
+	/* This group is being expired. Save the context */
+	if (time_after(cfqd->workload_expires, jiffies)) {
+		cfqg->saved_workload_slice = cfqd->workload_expires
+						- jiffies;
+		cfqg->saved_workload = cfqd->serving_type;
+		cfqg->saved_serving_prio = cfqd->serving_prio;
+	} else
+		cfqg->saved_workload_slice = 0;
+
+	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
+					st->min_vdisktime);
+	blkiocg_update_blkio_group_stats(&cfqg->blkg, used_sl,
+						cfqq->nr_sectors);
+}
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static inline struct cfq_group *cfqg_of_blkg(struct blkio_group *blkg)
+{
+	if (blkg)
+		return container_of(blkg, struct cfq_group, blkg);
+	return NULL;
+}
+
+void
+cfq_update_blkio_group_weight(struct blkio_group *blkg, unsigned int weight)
+{
+	cfqg_of_blkg(blkg)->weight = weight;
+}
+
+static struct cfq_group *
+cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)
+{
+	struct blkio_cgroup *blkcg = cgroup_to_blkio_cgroup(cgroup);
+	struct cfq_group *cfqg = NULL;
+	void *key = cfqd;
+	int i, j;
+	struct cfq_rb_root *st;
+	struct backing_dev_info *bdi = &cfqd->queue->backing_dev_info;
+	unsigned int major, minor;
+
+	/* Do we need to take this reference */
+	if (!blkiocg_css_tryget(blkcg))
+		return NULL;;
+
+	cfqg = cfqg_of_blkg(blkiocg_lookup_group(blkcg, key));
+	if (cfqg || !create)
+		goto done;
+
+	cfqg = kzalloc_node(sizeof(*cfqg), GFP_ATOMIC, cfqd->queue->node);
+	if (!cfqg)
+		goto done;
+
+	cfqg->weight = blkcg->weight;
+	for_each_cfqg_st(cfqg, i, j, st)
+		*st = CFQ_RB_ROOT;
+	RB_CLEAR_NODE(&cfqg->rb_node);
+
+	/*
+	 * Take the initial reference that will be released on destroy
+	 * This can be thought of a joint reference by cgroup and
+	 * elevator which will be dropped by either elevator exit
+	 * or cgroup deletion path depending on who is exiting first.
+	 */
+	atomic_set(&cfqg->ref, 1);
+
+	/* Add group onto cgroup list */
+	sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
+	blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+					MKDEV(major, minor));
+
+	/* Add group on cfqd list */
+	hlist_add_head(&cfqg->cfqd_node, &cfqd->cfqg_list);
+
+done:
+	blkiocg_css_put(blkcg);
+	return cfqg;
+}
+
 /*
- * The cfqd->service_tree holds all pending cfq_queue's that have
+ * Search for the cfq group current task belongs to. If create = 1, then also
+ * create the cfq group if it does not exist. request_queue lock must be held.
+ */
+static struct cfq_group *cfq_get_cfqg(struct cfq_data *cfqd, int create)
+{
+	struct cgroup *cgroup;
+	struct cfq_group *cfqg = NULL;
+
+	rcu_read_lock();
+	cgroup = task_cgroup(current, blkio_subsys_id);
+	cfqg = cfq_find_alloc_cfqg(cfqd, cgroup, create);
+	if (!cfqg && create)
+		cfqg = &cfqd->root_group;
+	rcu_read_unlock();
+	return cfqg;
+}
+
+static void cfq_link_cfqq_cfqg(struct cfq_queue *cfqq, struct cfq_group *cfqg)
+{
+	/* Currently, all async queues are mapped to root group */
+	if (!cfq_cfqq_sync(cfqq))
+		cfqg = &cfqq->cfqd->root_group;
+
+	cfqq->cfqg = cfqg;
+	/* cfqq reference on cfqg */
+	atomic_inc(&cfqq->cfqg->ref);
+}
+
+static void cfq_put_cfqg(struct cfq_group *cfqg)
+{
+	struct cfq_rb_root *st;
+	int i, j;
+
+	BUG_ON(atomic_read(&cfqg->ref) <= 0);
+	if (!atomic_dec_and_test(&cfqg->ref))
+		return;
+	for_each_cfqg_st(cfqg, i, j, st)
+		BUG_ON(!RB_EMPTY_ROOT(&st->rb) || st->active != NULL);
+	kfree(cfqg);
+}
+
+static void cfq_destroy_cfqg(struct cfq_data *cfqd, struct cfq_group *cfqg)
+{
+	/* Something wrong if we are trying to remove same group twice */
+	BUG_ON(hlist_unhashed(&cfqg->cfqd_node));
+
+	hlist_del_init(&cfqg->cfqd_node);
+
+	/*
+	 * Put the reference taken at the time of creation so that when all
+	 * queues are gone, group can be destroyed.
+	 */
+	cfq_put_cfqg(cfqg);
+}
+
+static void cfq_release_cfq_groups(struct cfq_data *cfqd)
+{
+	struct hlist_node *pos, *n;
+	struct cfq_group *cfqg;
+
+	hlist_for_each_entry_safe(cfqg, pos, n, &cfqd->cfqg_list, cfqd_node) {
+		/*
+		 * If cgroup removal path got to blk_group first and removed
+		 * it from cgroup list, then it will take care of destroying
+		 * cfqg also.
+		 */
+		if (!blkiocg_del_blkio_group(&cfqg->blkg))
+			cfq_destroy_cfqg(cfqd, cfqg);
+	}
+}
+
+/*
+ * Blk cgroup controller notification saying that blkio_group object is being
+ * delinked as associated cgroup object is going away. That also means that
+ * no new IO will come in this group. So get rid of this group as soon as
+ * any pending IO in the group is finished.
+ *
+ * This function is called under rcu_read_lock(). key is the rcu protected
+ * pointer. That means "key" is a valid cfq_data pointer as long as we are rcu
+ * read lock.
+ *
+ * "key" was fetched from blkio_group under blkio_cgroup->lock. That means
+ * it should not be NULL as even if elevator was exiting, cgroup deltion
+ * path got to it first.
+ */
+void cfq_unlink_blkio_group(void *key, struct blkio_group *blkg)
+{
+	unsigned long  flags;
+	struct cfq_data *cfqd = key;
+
+	spin_lock_irqsave(cfqd->queue->queue_lock, flags);
+	cfq_destroy_cfqg(cfqd, cfqg_of_blkg(blkg));
+	spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
+}
+
+#else /* GROUP_IOSCHED */
+static struct cfq_group *cfq_get_cfqg(struct cfq_data *cfqd, int create)
+{
+	return &cfqd->root_group;
+}
+static inline void
+cfq_link_cfqq_cfqg(struct cfq_queue *cfqq, struct cfq_group *cfqg) {
+	cfqq->cfqg = cfqg;
+}
+
+static void cfq_release_cfq_groups(struct cfq_data *cfqd) {}
+static inline void cfq_put_cfqg(struct cfq_group *cfqg) {}
+
+#endif /* GROUP_IOSCHED */
+
+/*
+ * The cfqd->service_trees holds all pending cfq_queue's that have
  * requests waiting to be processed. It is sorted in the order that
  * we will service the queues.
  */
@@ -495,11 +1120,42 @@
 	struct rb_node **p, *parent;
 	struct cfq_queue *__cfqq;
 	unsigned long rb_key;
+	struct cfq_rb_root *service_tree;
 	int left;
+	int new_cfqq = 1;
+	int group_changed = 0;
 
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+	if (!cfqd->cfq_group_isolation
+	    && cfqq_type(cfqq) == SYNC_NOIDLE_WORKLOAD
+	    && cfqq->cfqg && cfqq->cfqg != &cfqd->root_group) {
+		/* Move this cfq to root group */
+		cfq_log_cfqq(cfqd, cfqq, "moving to root group");
+		if (!RB_EMPTY_NODE(&cfqq->rb_node))
+			cfq_group_service_tree_del(cfqd, cfqq->cfqg);
+		cfqq->orig_cfqg = cfqq->cfqg;
+		cfqq->cfqg = &cfqd->root_group;
+		atomic_inc(&cfqd->root_group.ref);
+		group_changed = 1;
+	} else if (!cfqd->cfq_group_isolation
+		   && cfqq_type(cfqq) == SYNC_WORKLOAD && cfqq->orig_cfqg) {
+		/* cfqq is sequential now needs to go to its original group */
+		BUG_ON(cfqq->cfqg != &cfqd->root_group);
+		if (!RB_EMPTY_NODE(&cfqq->rb_node))
+			cfq_group_service_tree_del(cfqd, cfqq->cfqg);
+		cfq_put_cfqg(cfqq->cfqg);
+		cfqq->cfqg = cfqq->orig_cfqg;
+		cfqq->orig_cfqg = NULL;
+		group_changed = 1;
+		cfq_log_cfqq(cfqd, cfqq, "moved to origin group");
+	}
+#endif
+
+	service_tree = service_tree_for(cfqq->cfqg, cfqq_prio(cfqq),
+						cfqq_type(cfqq), cfqd);
 	if (cfq_class_idle(cfqq)) {
 		rb_key = CFQ_IDLE_DELAY;
-		parent = rb_last(&cfqd->service_tree.rb);
+		parent = rb_last(&service_tree->rb);
 		if (parent && parent != &cfqq->rb_node) {
 			__cfqq = rb_entry(parent, struct cfq_queue, rb_node);
 			rb_key += __cfqq->rb_key;
@@ -517,23 +1173,27 @@
 		cfqq->slice_resid = 0;
 	} else {
 		rb_key = -HZ;
-		__cfqq = cfq_rb_first(&cfqd->service_tree);
+		__cfqq = cfq_rb_first(service_tree);
 		rb_key += __cfqq ? __cfqq->rb_key : jiffies;
 	}
 
 	if (!RB_EMPTY_NODE(&cfqq->rb_node)) {
+		new_cfqq = 0;
 		/*
 		 * same position, nothing more to do
 		 */
-		if (rb_key == cfqq->rb_key)
+		if (rb_key == cfqq->rb_key &&
+		    cfqq->service_tree == service_tree)
 			return;
 
-		cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+		cfq_rb_erase(&cfqq->rb_node, cfqq->service_tree);
+		cfqq->service_tree = NULL;
 	}
 
 	left = 1;
 	parent = NULL;
-	p = &cfqd->service_tree.rb.rb_node;
+	cfqq->service_tree = service_tree;
+	p = &service_tree->rb.rb_node;
 	while (*p) {
 		struct rb_node **n;
 
@@ -541,35 +1201,28 @@
 		__cfqq = rb_entry(parent, struct cfq_queue, rb_node);
 
 		/*
-		 * sort RT queues first, we always want to give
-		 * preference to them. IDLE queues goes to the back.
-		 * after that, sort on the next service time.
+		 * sort by key, that represents service time.
 		 */
-		if (cfq_class_rt(cfqq) > cfq_class_rt(__cfqq))
+		if (time_before(rb_key, __cfqq->rb_key))
 			n = &(*p)->rb_left;
-		else if (cfq_class_rt(cfqq) < cfq_class_rt(__cfqq))
+		else {
 			n = &(*p)->rb_right;
-		else if (cfq_class_idle(cfqq) < cfq_class_idle(__cfqq))
-			n = &(*p)->rb_left;
-		else if (cfq_class_idle(cfqq) > cfq_class_idle(__cfqq))
-			n = &(*p)->rb_right;
-		else if (time_before(rb_key, __cfqq->rb_key))
-			n = &(*p)->rb_left;
-		else
-			n = &(*p)->rb_right;
-
-		if (n == &(*p)->rb_right)
 			left = 0;
+		}
 
 		p = n;
 	}
 
 	if (left)
-		cfqd->service_tree.left = &cfqq->rb_node;
+		service_tree->left = &cfqq->rb_node;
 
 	cfqq->rb_key = rb_key;
 	rb_link_node(&cfqq->rb_node, parent, p);
-	rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb);
+	rb_insert_color(&cfqq->rb_node, &service_tree->rb);
+	service_tree->count++;
+	if ((add_front || !new_cfqq) && !group_changed)
+		return;
+	cfq_group_service_tree_add(cfqd, cfqq->cfqg);
 }
 
 static struct cfq_queue *
@@ -671,13 +1324,16 @@
 	BUG_ON(!cfq_cfqq_on_rr(cfqq));
 	cfq_clear_cfqq_on_rr(cfqq);
 
-	if (!RB_EMPTY_NODE(&cfqq->rb_node))
-		cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+	if (!RB_EMPTY_NODE(&cfqq->rb_node)) {
+		cfq_rb_erase(&cfqq->rb_node, cfqq->service_tree);
+		cfqq->service_tree = NULL;
+	}
 	if (cfqq->p_root) {
 		rb_erase(&cfqq->p_node, cfqq->p_root);
 		cfqq->p_root = NULL;
 	}
 
+	cfq_group_service_tree_del(cfqd, cfqq->cfqg);
 	BUG_ON(!cfqd->busy_queues);
 	cfqd->busy_queues--;
 }
@@ -688,7 +1344,6 @@
 static void cfq_del_rq_rb(struct request *rq)
 {
 	struct cfq_queue *cfqq = RQ_CFQQ(rq);
-	struct cfq_data *cfqd = cfqq->cfqd;
 	const int sync = rq_is_sync(rq);
 
 	BUG_ON(!cfqq->queued[sync]);
@@ -696,8 +1351,17 @@
 
 	elv_rb_del(&cfqq->sort_list, rq);
 
-	if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY_ROOT(&cfqq->sort_list))
-		cfq_del_cfqq_rr(cfqd, cfqq);
+	if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY_ROOT(&cfqq->sort_list)) {
+		/*
+		 * Queue will be deleted from service tree when we actually
+		 * expire it later. Right now just remove it from prio tree
+		 * as it is empty.
+		 */
+		if (cfqq->p_root) {
+			rb_erase(&cfqq->p_node, cfqq->p_root);
+			cfqq->p_root = NULL;
+		}
+	}
 }
 
 static void cfq_add_rq_rb(struct request *rq)
@@ -722,7 +1386,7 @@
 	 * check if this request is a better next-serve candidate
 	 */
 	prev = cfqq->next_rq;
-	cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+	cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq, cfqd->last_position);
 
 	/*
 	 * adjust priority tree position, if ->next_rq changes
@@ -829,6 +1493,7 @@
 cfq_merged_requests(struct request_queue *q, struct request *rq,
 		    struct request *next)
 {
+	struct cfq_queue *cfqq = RQ_CFQQ(rq);
 	/*
 	 * reposition in fifo if next is older than rq
 	 */
@@ -838,6 +1503,8 @@
 		rq_set_fifo_time(rq, rq_fifo_time(next));
 	}
 
+	if (cfqq->next_rq == next)
+		cfqq->next_rq = rq;
 	cfq_remove_request(next);
 }
 
@@ -848,6 +1515,9 @@
 	struct cfq_io_context *cic;
 	struct cfq_queue *cfqq;
 
+	/* Deny merge if bio and rq don't belong to same cfq group */
+	if ((RQ_CFQQ(rq))->cfqg != cfq_get_cfqg(cfqd, 0))
+		return false;
 	/*
 	 * Disallow merge of a sync bio into an async request.
 	 */
@@ -871,8 +1541,12 @@
 {
 	if (cfqq) {
 		cfq_log_cfqq(cfqd, cfqq, "set_active");
+		cfqq->slice_start = 0;
+		cfqq->dispatch_start = jiffies;
+		cfqq->allocated_slice = 0;
 		cfqq->slice_end = 0;
 		cfqq->slice_dispatch = 0;
+		cfqq->nr_sectors = 0;
 
 		cfq_clear_cfqq_wait_request(cfqq);
 		cfq_clear_cfqq_must_dispatch(cfqq);
@@ -899,6 +1573,8 @@
 		del_timer(&cfqd->idle_slice_timer);
 
 	cfq_clear_cfqq_wait_request(cfqq);
+	cfq_clear_cfqq_wait_busy(cfqq);
+	cfq_clear_cfqq_wait_busy_done(cfqq);
 
 	/*
 	 * store what was left of this slice, if the queue idled/timed out
@@ -908,11 +1584,19 @@
 		cfq_log_cfqq(cfqd, cfqq, "resid=%ld", cfqq->slice_resid);
 	}
 
+	cfq_group_served(cfqd, cfqq->cfqg, cfqq);
+
+	if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY_ROOT(&cfqq->sort_list))
+		cfq_del_cfqq_rr(cfqd, cfqq);
+
 	cfq_resort_rr_list(cfqd, cfqq);
 
 	if (cfqq == cfqd->active_queue)
 		cfqd->active_queue = NULL;
 
+	if (&cfqq->cfqg->rb_node == cfqd->grp_service_tree.active)
+		cfqd->grp_service_tree.active = NULL;
+
 	if (cfqd->active_cic) {
 		put_io_context(cfqd->active_cic->ioc);
 		cfqd->active_cic = NULL;
@@ -933,10 +1617,39 @@
  */
 static struct cfq_queue *cfq_get_next_queue(struct cfq_data *cfqd)
 {
-	if (RB_EMPTY_ROOT(&cfqd->service_tree.rb))
+	struct cfq_rb_root *service_tree =
+		service_tree_for(cfqd->serving_group, cfqd->serving_prio,
+					cfqd->serving_type, cfqd);
+
+	if (!cfqd->rq_queued)
 		return NULL;
 
-	return cfq_rb_first(&cfqd->service_tree);
+	/* There is nothing to dispatch */
+	if (!service_tree)
+		return NULL;
+	if (RB_EMPTY_ROOT(&service_tree->rb))
+		return NULL;
+	return cfq_rb_first(service_tree);
+}
+
+static struct cfq_queue *cfq_get_next_queue_forced(struct cfq_data *cfqd)
+{
+	struct cfq_group *cfqg;
+	struct cfq_queue *cfqq;
+	int i, j;
+	struct cfq_rb_root *st;
+
+	if (!cfqd->rq_queued)
+		return NULL;
+
+	cfqg = cfq_get_next_cfqg(cfqd);
+	if (!cfqg)
+		return NULL;
+
+	for_each_cfqg_st(cfqg, i, j, st)
+		if ((cfqq = cfq_rb_first(st)) != NULL)
+			return cfqq;
+	return NULL;
 }
 
 /*
@@ -945,14 +1658,8 @@
 static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
 					      struct cfq_queue *cfqq)
 {
-	if (!cfqq) {
+	if (!cfqq)
 		cfqq = cfq_get_next_queue(cfqd);
-		if (cfqq && !cfq_cfqq_coop_preempt(cfqq))
-			cfq_clear_cfqq_coop(cfqq);
-	}
-
-	if (cfqq)
-		cfq_clear_cfqq_coop_preempt(cfqq);
 
 	__cfq_set_active_queue(cfqd, cfqq);
 	return cfqq;
@@ -967,16 +1674,16 @@
 		return cfqd->last_position - blk_rq_pos(rq);
 }
 
-#define CIC_SEEK_THR	8 * 1024
-#define CIC_SEEKY(cic)	((cic)->seek_mean > CIC_SEEK_THR)
+#define CFQQ_SEEK_THR		8 * 1024
+#define CFQQ_SEEKY(cfqq)	((cfqq)->seek_mean > CFQQ_SEEK_THR)
 
-static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
+static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+			       struct request *rq)
 {
-	struct cfq_io_context *cic = cfqd->active_cic;
-	sector_t sdist = cic->seek_mean;
+	sector_t sdist = cfqq->seek_mean;
 
-	if (!sample_valid(cic->seek_samples))
-		sdist = CIC_SEEK_THR;
+	if (!sample_valid(cfqq->seek_samples))
+		sdist = CFQQ_SEEK_THR;
 
 	return cfq_dist_from_last(cfqd, rq) <= sdist;
 }
@@ -1005,7 +1712,7 @@
 	 * will contain the closest sector.
 	 */
 	__cfqq = rb_entry(parent, struct cfq_queue, p_node);
-	if (cfq_rq_close(cfqd, __cfqq->next_rq))
+	if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
 		return __cfqq;
 
 	if (blk_rq_pos(__cfqq->next_rq) < sector)
@@ -1016,7 +1723,7 @@
 		return NULL;
 
 	__cfqq = rb_entry(node, struct cfq_queue, p_node);
-	if (cfq_rq_close(cfqd, __cfqq->next_rq))
+	if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
 		return __cfqq;
 
 	return NULL;
@@ -1033,16 +1740,13 @@
  * assumption.
  */
 static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
-					      struct cfq_queue *cur_cfqq,
-					      bool probe)
+					      struct cfq_queue *cur_cfqq)
 {
 	struct cfq_queue *cfqq;
 
-	/*
-	 * A valid cfq_io_context is necessary to compare requests against
-	 * the seek_mean of the current cfqq.
-	 */
-	if (!cfqd->active_cic)
+	if (!cfq_cfqq_sync(cur_cfqq))
+		return NULL;
+	if (CFQQ_SEEKY(cur_cfqq))
 		return NULL;
 
 	/*
@@ -1054,14 +1758,55 @@
 	if (!cfqq)
 		return NULL;
 
-	if (cfq_cfqq_coop(cfqq))
+	/* If new queue belongs to different cfq_group, don't choose it */
+	if (cur_cfqq->cfqg != cfqq->cfqg)
 		return NULL;
 
-	if (!probe)
-		cfq_mark_cfqq_coop(cfqq);
+	/*
+	 * It only makes sense to merge sync queues.
+	 */
+	if (!cfq_cfqq_sync(cfqq))
+		return NULL;
+	if (CFQQ_SEEKY(cfqq))
+		return NULL;
+
+	/*
+	 * Do not merge queues of different priority classes
+	 */
+	if (cfq_class_rt(cfqq) != cfq_class_rt(cur_cfqq))
+		return NULL;
+
 	return cfqq;
 }
 
+/*
+ * Determine whether we should enforce idle window for this queue.
+ */
+
+static bool cfq_should_idle(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+	enum wl_prio_t prio = cfqq_prio(cfqq);
+	struct cfq_rb_root *service_tree = cfqq->service_tree;
+
+	BUG_ON(!service_tree);
+	BUG_ON(!service_tree->count);
+
+	/* We never do for idle class queues. */
+	if (prio == IDLE_WORKLOAD)
+		return false;
+
+	/* We do for queues that were marked with idle window flag. */
+	if (cfq_cfqq_idle_window(cfqq) &&
+	   !(blk_queue_nonrot(cfqd->queue) && cfqd->hw_tag))
+		return true;
+
+	/*
+	 * Otherwise, we do only if they are the last ones
+	 * in their service tree.
+	 */
+	return service_tree->count == 1;
+}
+
 static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 {
 	struct cfq_queue *cfqq = cfqd->active_queue;
@@ -1082,13 +1827,13 @@
 	/*
 	 * idle is disabled, either manually or by past process history
 	 */
-	if (!cfqd->cfq_slice_idle || !cfq_cfqq_idle_window(cfqq))
+	if (!cfqd->cfq_slice_idle || !cfq_should_idle(cfqd, cfqq))
 		return;
 
 	/*
-	 * still requests with the driver, don't idle
+	 * still active requests from this queue, don't idle
 	 */
-	if (rq_in_driver(cfqd))
+	if (cfqq->dispatched)
 		return;
 
 	/*
@@ -1109,14 +1854,7 @@
 
 	cfq_mark_cfqq_wait_request(cfqq);
 
-	/*
-	 * we don't want to idle for seeks, but we do want to allow
-	 * fair distribution of slice time for a process doing back-to-back
-	 * seeks. so allow a little bit of time for him to submit a new rq
-	 */
 	sl = cfqd->cfq_slice_idle;
-	if (sample_valid(cic->seek_samples) && CIC_SEEKY(cic))
-		sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
 	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
@@ -1139,6 +1877,7 @@
 
 	if (cfq_cfqq_sync(cfqq))
 		cfqd->sync_flight++;
+	cfqq->nr_sectors += blk_rq_sectors(rq);
 }
 
 /*
@@ -1175,6 +1914,207 @@
 }
 
 /*
+ * Must be called with the queue_lock held.
+ */
+static int cfqq_process_refs(struct cfq_queue *cfqq)
+{
+	int process_refs, io_refs;
+
+	io_refs = cfqq->allocated[READ] + cfqq->allocated[WRITE];
+	process_refs = atomic_read(&cfqq->ref) - io_refs;
+	BUG_ON(process_refs < 0);
+	return process_refs;
+}
+
+static void cfq_setup_merge(struct cfq_queue *cfqq, struct cfq_queue *new_cfqq)
+{
+	int process_refs, new_process_refs;
+	struct cfq_queue *__cfqq;
+
+	/* Avoid a circular list and skip interim queue merges */
+	while ((__cfqq = new_cfqq->new_cfqq)) {
+		if (__cfqq == cfqq)
+			return;
+		new_cfqq = __cfqq;
+	}
+
+	process_refs = cfqq_process_refs(cfqq);
+	/*
+	 * If the process for the cfqq has gone away, there is no
+	 * sense in merging the queues.
+	 */
+	if (process_refs == 0)
+		return;
+
+	/*
+	 * Merge in the direction of the lesser amount of work.
+	 */
+	new_process_refs = cfqq_process_refs(new_cfqq);
+	if (new_process_refs >= process_refs) {
+		cfqq->new_cfqq = new_cfqq;
+		atomic_add(process_refs, &new_cfqq->ref);
+	} else {
+		new_cfqq->new_cfqq = cfqq;
+		atomic_add(new_process_refs, &cfqq->ref);
+	}
+}
+
+static enum wl_type_t cfq_choose_wl(struct cfq_data *cfqd,
+				struct cfq_group *cfqg, enum wl_prio_t prio,
+				bool prio_changed)
+{
+	struct cfq_queue *queue;
+	int i;
+	bool key_valid = false;
+	unsigned long lowest_key = 0;
+	enum wl_type_t cur_best = SYNC_NOIDLE_WORKLOAD;
+
+	if (prio_changed) {
+		/*
+		 * When priorities switched, we prefer starting
+		 * from SYNC_NOIDLE (first choice), or just SYNC
+		 * over ASYNC
+		 */
+		if (service_tree_for(cfqg, prio, cur_best, cfqd)->count)
+			return cur_best;
+		cur_best = SYNC_WORKLOAD;
+		if (service_tree_for(cfqg, prio, cur_best, cfqd)->count)
+			return cur_best;
+
+		return ASYNC_WORKLOAD;
+	}
+
+	for (i = 0; i < 3; ++i) {
+		/* otherwise, select the one with lowest rb_key */
+		queue = cfq_rb_first(service_tree_for(cfqg, prio, i, cfqd));
+		if (queue &&
+		    (!key_valid || time_before(queue->rb_key, lowest_key))) {
+			lowest_key = queue->rb_key;
+			cur_best = i;
+			key_valid = true;
+		}
+	}
+
+	return cur_best;
+}
+
+static void choose_service_tree(struct cfq_data *cfqd, struct cfq_group *cfqg)
+{
+	enum wl_prio_t previous_prio = cfqd->serving_prio;
+	bool prio_changed;
+	unsigned slice;
+	unsigned count;
+	struct cfq_rb_root *st;
+	unsigned group_slice;
+
+	if (!cfqg) {
+		cfqd->serving_prio = IDLE_WORKLOAD;
+		cfqd->workload_expires = jiffies + 1;
+		return;
+	}
+
+	/* Choose next priority. RT > BE > IDLE */
+	if (cfq_group_busy_queues_wl(RT_WORKLOAD, cfqd, cfqg))
+		cfqd->serving_prio = RT_WORKLOAD;
+	else if (cfq_group_busy_queues_wl(BE_WORKLOAD, cfqd, cfqg))
+		cfqd->serving_prio = BE_WORKLOAD;
+	else {
+		cfqd->serving_prio = IDLE_WORKLOAD;
+		cfqd->workload_expires = jiffies + 1;
+		return;
+	}
+
+	/*
+	 * For RT and BE, we have to choose also the type
+	 * (SYNC, SYNC_NOIDLE, ASYNC), and to compute a workload
+	 * expiration time
+	 */
+	prio_changed = (cfqd->serving_prio != previous_prio);
+	st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type,
+				cfqd);
+	count = st->count;
+
+	/*
+	 * If priority didn't change, check workload expiration,
+	 * and that we still have other queues ready
+	 */
+	if (!prio_changed && count &&
+	    !time_after(jiffies, cfqd->workload_expires))
+		return;
+
+	/* otherwise select new workload type */
+	cfqd->serving_type =
+		cfq_choose_wl(cfqd, cfqg, cfqd->serving_prio, prio_changed);
+	st = service_tree_for(cfqg, cfqd->serving_prio, cfqd->serving_type,
+				cfqd);
+	count = st->count;
+
+	/*
+	 * the workload slice is computed as a fraction of target latency
+	 * proportional to the number of queues in that workload, over
+	 * all the queues in the same priority class
+	 */
+	group_slice = cfq_group_slice(cfqd, cfqg);
+
+	slice = group_slice * count /
+		max_t(unsigned, cfqg->busy_queues_avg[cfqd->serving_prio],
+		      cfq_group_busy_queues_wl(cfqd->serving_prio, cfqd, cfqg));
+
+	if (cfqd->serving_type == ASYNC_WORKLOAD) {
+		unsigned int tmp;
+
+		/*
+		 * Async queues are currently system wide. Just taking
+		 * proportion of queues with-in same group will lead to higher
+		 * async ratio system wide as generally root group is going
+		 * to have higher weight. A more accurate thing would be to
+		 * calculate system wide asnc/sync ratio.
+		 */
+		tmp = cfq_target_latency * cfqg_busy_async_queues(cfqd, cfqg);
+		tmp = tmp/cfqd->busy_queues;
+		slice = min_t(unsigned, slice, tmp);
+
+		/* async workload slice is scaled down according to
+		 * the sync/async slice ratio. */
+		slice = slice * cfqd->cfq_slice[0] / cfqd->cfq_slice[1];
+	} else
+		/* sync workload slice is at least 2 * cfq_slice_idle */
+		slice = max(slice, 2 * cfqd->cfq_slice_idle);
+
+	slice = max_t(unsigned, slice, CFQ_MIN_TT);
+	cfqd->workload_expires = jiffies + slice;
+	cfqd->noidle_tree_requires_idle = false;
+}
+
+static struct cfq_group *cfq_get_next_cfqg(struct cfq_data *cfqd)
+{
+	struct cfq_rb_root *st = &cfqd->grp_service_tree;
+	struct cfq_group *cfqg;
+
+	if (RB_EMPTY_ROOT(&st->rb))
+		return NULL;
+	cfqg = cfq_rb_first_group(st);
+	st->active = &cfqg->rb_node;
+	update_min_vdisktime(st);
+	return cfqg;
+}
+
+static void cfq_choose_cfqg(struct cfq_data *cfqd)
+{
+	struct cfq_group *cfqg = cfq_get_next_cfqg(cfqd);
+
+	cfqd->serving_group = cfqg;
+
+	/* Restore the workload type data */
+	if (cfqg->saved_workload_slice) {
+		cfqd->workload_expires = jiffies + cfqg->saved_workload_slice;
+		cfqd->serving_type = cfqg->saved_workload;
+		cfqd->serving_prio = cfqg->saved_serving_prio;
+	}
+	choose_service_tree(cfqd, cfqg);
+}
+
+/*
  * Select a queue for service. If we have a current active queue,
  * check whether to continue servicing it, or retrieve and set a new one.
  */
@@ -1186,10 +2126,13 @@
 	if (!cfqq)
 		goto new_queue;
 
+	if (!cfqd->rq_queued)
+		return NULL;
 	/*
 	 * The active queue has run out of time, expire it and select new.
 	 */
-	if (cfq_slice_used(cfqq) && !cfq_cfqq_must_dispatch(cfqq))
+	if ((cfq_slice_used(cfqq) || cfq_cfqq_wait_busy_done(cfqq))
+	     && !cfq_cfqq_must_dispatch(cfqq))
 		goto expire;
 
 	/*
@@ -1203,11 +2146,14 @@
 	 * If another queue has a request waiting within our mean seek
 	 * distance, let it run.  The expire code will check for close
 	 * cooperators and put the close queue at the front of the service
-	 * tree.
+	 * tree.  If possible, merge the expiring queue with the new cfqq.
 	 */
-	new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0);
-	if (new_cfqq)
+	new_cfqq = cfq_close_cooperator(cfqd, cfqq);
+	if (new_cfqq) {
+		if (!cfqq->new_cfqq)
+			cfq_setup_merge(cfqq, new_cfqq);
 		goto expire;
+	}
 
 	/*
 	 * No requests pending. If the active queue still has requests in
@@ -1215,7 +2161,7 @@
 	 * conditions to happen (or time out) before selecting a new queue.
 	 */
 	if (timer_pending(&cfqd->idle_slice_timer) ||
-	    (cfqq->dispatched && cfq_cfqq_idle_window(cfqq))) {
+	    (cfqq->dispatched && cfq_should_idle(cfqd, cfqq))) {
 		cfqq = NULL;
 		goto keep_queue;
 	}
@@ -1223,6 +2169,13 @@
 expire:
 	cfq_slice_expired(cfqd, 0);
 new_queue:
+	/*
+	 * Current queue expired. Check if we have to switch to a new
+	 * service tree
+	 */
+	if (!new_cfqq)
+		cfq_choose_cfqg(cfqd);
+
 	cfqq = cfq_set_active_queue(cfqd, new_cfqq);
 keep_queue:
 	return cfqq;
@@ -1238,6 +2191,9 @@
 	}
 
 	BUG_ON(!list_empty(&cfqq->fifo));
+
+	/* By default cfqq is not expired if it is empty. Do it explicitly */
+	__cfq_slice_expired(cfqq->cfqd, cfqq, 0);
 	return dispatched;
 }
 
@@ -1250,11 +2206,10 @@
 	struct cfq_queue *cfqq;
 	int dispatched = 0;
 
-	while ((cfqq = cfq_rb_first(&cfqd->service_tree)) != NULL)
+	while ((cfqq = cfq_get_next_queue_forced(cfqd)) != NULL)
 		dispatched += __cfq_forced_dispatch_cfqq(cfqq);
 
 	cfq_slice_expired(cfqd, 0);
-
 	BUG_ON(cfqd->busy_queues);
 
 	cfq_log(cfqd, "forced_dispatch=%d", dispatched);
@@ -1268,7 +2223,7 @@
 	/*
 	 * Drain async requests before we start sync IO
 	 */
-	if (cfq_cfqq_idle_window(cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
+	if (cfq_should_idle(cfqd, cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
 		return false;
 
 	/*
@@ -1298,9 +2253,9 @@
 			return false;
 
 		/*
-		 * Sole queue user, allow bigger slice
+		 * Sole queue user, no limit
 		 */
-		max_dispatch *= 4;
+		max_dispatch = -1;
 	}
 
 	/*
@@ -1407,11 +2362,13 @@
  * task holds one reference to the queue, dropped when task exits. each rq
  * in-flight on this queue also holds a reference, dropped when rq is freed.
  *
+ * Each cfq queue took a reference on the parent group. Drop it now.
  * queue lock must be held here.
  */
 static void cfq_put_queue(struct cfq_queue *cfqq)
 {
 	struct cfq_data *cfqd = cfqq->cfqd;
+	struct cfq_group *cfqg, *orig_cfqg;
 
 	BUG_ON(atomic_read(&cfqq->ref) <= 0);
 
@@ -1421,14 +2378,19 @@
 	cfq_log_cfqq(cfqd, cfqq, "put_queue");
 	BUG_ON(rb_first(&cfqq->sort_list));
 	BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
-	BUG_ON(cfq_cfqq_on_rr(cfqq));
+	cfqg = cfqq->cfqg;
+	orig_cfqg = cfqq->orig_cfqg;
 
 	if (unlikely(cfqd->active_queue == cfqq)) {
 		__cfq_slice_expired(cfqd, cfqq, 0);
 		cfq_schedule_dispatch(cfqd);
 	}
 
+	BUG_ON(cfq_cfqq_on_rr(cfqq));
 	kmem_cache_free(cfq_pool, cfqq);
+	cfq_put_cfqg(cfqg);
+	if (orig_cfqg)
+		cfq_put_cfqg(orig_cfqg);
 }
 
 /*
@@ -1518,11 +2480,29 @@
 
 static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
+	struct cfq_queue *__cfqq, *next;
+
 	if (unlikely(cfqq == cfqd->active_queue)) {
 		__cfq_slice_expired(cfqd, cfqq, 0);
 		cfq_schedule_dispatch(cfqd);
 	}
 
+	/*
+	 * If this queue was scheduled to merge with another queue, be
+	 * sure to drop the reference taken on that queue (and others in
+	 * the merge chain).  See cfq_setup_merge and cfq_merge_cfqqs.
+	 */
+	__cfqq = cfqq->new_cfqq;
+	while (__cfqq) {
+		if (__cfqq == cfqq) {
+			WARN(1, "cfqq->new_cfqq loop detected\n");
+			break;
+		}
+		next = __cfqq->new_cfqq;
+		cfq_put_queue(__cfqq);
+		__cfqq = next;
+	}
+
 	cfq_put_queue(cfqq);
 }
 
@@ -1703,14 +2683,51 @@
 	cfqq->pid = pid;
 }
 
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static void changed_cgroup(struct io_context *ioc, struct cfq_io_context *cic)
+{
+	struct cfq_queue *sync_cfqq = cic_to_cfqq(cic, 1);
+	struct cfq_data *cfqd = cic->key;
+	unsigned long flags;
+	struct request_queue *q;
+
+	if (unlikely(!cfqd))
+		return;
+
+	q = cfqd->queue;
+
+	spin_lock_irqsave(q->queue_lock, flags);
+
+	if (sync_cfqq) {
+		/*
+		 * Drop reference to sync queue. A new sync queue will be
+		 * assigned in new group upon arrival of a fresh request.
+		 */
+		cfq_log_cfqq(cfqd, sync_cfqq, "changed cgroup");
+		cic_set_cfqq(cic, NULL, 1);
+		cfq_put_queue(sync_cfqq);
+	}
+
+	spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
+static void cfq_ioc_set_cgroup(struct io_context *ioc)
+{
+	call_for_each_cic(ioc, changed_cgroup);
+	ioc->cgroup_changed = 0;
+}
+#endif  /* CONFIG_CFQ_GROUP_IOSCHED */
+
 static struct cfq_queue *
 cfq_find_alloc_queue(struct cfq_data *cfqd, bool is_sync,
 		     struct io_context *ioc, gfp_t gfp_mask)
 {
 	struct cfq_queue *cfqq, *new_cfqq = NULL;
 	struct cfq_io_context *cic;
+	struct cfq_group *cfqg;
 
 retry:
+	cfqg = cfq_get_cfqg(cfqd, 1);
 	cic = cfq_cic_lookup(cfqd, ioc);
 	/* cic always exists here */
 	cfqq = cic_to_cfqq(cic, is_sync);
@@ -1741,6 +2758,7 @@
 		if (cfqq) {
 			cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
 			cfq_init_prio_data(cfqq, ioc);
+			cfq_link_cfqq_cfqg(cfqq, cfqg);
 			cfq_log_cfqq(cfqd, cfqq, "alloced");
 		} else
 			cfqq = &cfqd->oom_cfqq;
@@ -1932,6 +2950,10 @@
 	if (unlikely(ioc->ioprio_changed))
 		cfq_ioc_set_ioprio(ioc);
 
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+	if (unlikely(ioc->cgroup_changed))
+		cfq_ioc_set_cgroup(ioc);
+#endif
 	return cic;
 err_free:
 	cfq_cic_free(cic);
@@ -1952,33 +2974,46 @@
 }
 
 static void
-cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic,
+cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 		       struct request *rq)
 {
 	sector_t sdist;
 	u64 total;
 
-	if (!cic->last_request_pos)
+	if (!cfqq->last_request_pos)
 		sdist = 0;
-	else if (cic->last_request_pos < blk_rq_pos(rq))
-		sdist = blk_rq_pos(rq) - cic->last_request_pos;
+	else if (cfqq->last_request_pos < blk_rq_pos(rq))
+		sdist = blk_rq_pos(rq) - cfqq->last_request_pos;
 	else
-		sdist = cic->last_request_pos - blk_rq_pos(rq);
+		sdist = cfqq->last_request_pos - blk_rq_pos(rq);
 
 	/*
 	 * Don't allow the seek distance to get too large from the
 	 * odd fragment, pagein, etc
 	 */
-	if (cic->seek_samples <= 60) /* second&third seek */
-		sdist = min(sdist, (cic->seek_mean * 4) + 2*1024*1024);
+	if (cfqq->seek_samples <= 60) /* second&third seek */
+		sdist = min(sdist, (cfqq->seek_mean * 4) + 2*1024*1024);
 	else
-		sdist = min(sdist, (cic->seek_mean * 4)	+ 2*1024*64);
+		sdist = min(sdist, (cfqq->seek_mean * 4) + 2*1024*64);
 
-	cic->seek_samples = (7*cic->seek_samples + 256) / 8;
-	cic->seek_total = (7*cic->seek_total + (u64)256*sdist) / 8;
-	total = cic->seek_total + (cic->seek_samples/2);
-	do_div(total, cic->seek_samples);
-	cic->seek_mean = (sector_t)total;
+	cfqq->seek_samples = (7*cfqq->seek_samples + 256) / 8;
+	cfqq->seek_total = (7*cfqq->seek_total + (u64)256*sdist) / 8;
+	total = cfqq->seek_total + (cfqq->seek_samples/2);
+	do_div(total, cfqq->seek_samples);
+	cfqq->seek_mean = (sector_t)total;
+
+	/*
+	 * If this cfqq is shared between multiple processes, check to
+	 * make sure that those processes are still issuing I/Os within
+	 * the mean seek distance.  If not, it may be time to break the
+	 * queues apart again.
+	 */
+	if (cfq_cfqq_coop(cfqq)) {
+		if (CFQQ_SEEKY(cfqq) && !cfqq->seeky_start)
+			cfqq->seeky_start = jiffies;
+		else if (!CFQQ_SEEKY(cfqq))
+			cfqq->seeky_start = 0;
+	}
 }
 
 /*
@@ -1999,14 +3034,15 @@
 
 	enable_idle = old_idle = cfq_cfqq_idle_window(cfqq);
 
+	if (cfqq->queued[0] + cfqq->queued[1] >= 4)
+		cfq_mark_cfqq_deep(cfqq);
+
 	if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
-	    (!cfqd->cfq_latency && cfqd->hw_tag && CIC_SEEKY(cic)))
+	    (!cfq_cfqq_deep(cfqq) && sample_valid(cfqq->seek_samples)
+	     && CFQQ_SEEKY(cfqq)))
 		enable_idle = 0;
 	else if (sample_valid(cic->ttime_samples)) {
-		unsigned int slice_idle = cfqd->cfq_slice_idle;
-		if (sample_valid(cic->seek_samples) && CIC_SEEKY(cic))
-			slice_idle = msecs_to_jiffies(CFQ_MIN_TT);
-		if (cic->ttime_mean > slice_idle)
+		if (cic->ttime_mean > cfqd->cfq_slice_idle)
 			enable_idle = 0;
 		else
 			enable_idle = 1;
@@ -2035,9 +3071,6 @@
 	if (!cfqq)
 		return false;
 
-	if (cfq_slice_used(cfqq))
-		return true;
-
 	if (cfq_class_idle(new_cfqq))
 		return false;
 
@@ -2051,6 +3084,19 @@
 	if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq))
 		return true;
 
+	if (new_cfqq->cfqg != cfqq->cfqg)
+		return false;
+
+	if (cfq_slice_used(cfqq))
+		return true;
+
+	/* Allow preemption only if we are idling on sync-noidle tree */
+	if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD &&
+	    cfqq_type(new_cfqq) == SYNC_NOIDLE_WORKLOAD &&
+	    new_cfqq->service_tree->count == 2 &&
+	    RB_EMPTY_ROOT(&cfqq->sort_list))
+		return true;
+
 	/*
 	 * So both queues are sync. Let the new request get disk time if
 	 * it's a metadata request and the current queue is doing regular IO.
@@ -2071,16 +3117,8 @@
 	 * if this request is as-good as one we would expect from the
 	 * current cfqq, let it preempt
 	 */
-	if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) ||
-	    cfqd->busy_queues == 1)) {
-		/*
-		 * Mark new queue coop_preempt, so its coop flag will not be
-		 * cleared when new queue gets scheduled at the very first time
-		 */
-		cfq_mark_cfqq_coop_preempt(new_cfqq);
-		cfq_mark_cfqq_coop(new_cfqq);
+	if (cfq_rq_close(cfqd, cfqq, rq))
 		return true;
-	}
 
 	return false;
 }
@@ -2121,12 +3159,16 @@
 		cfqq->meta_pending++;
 
 	cfq_update_io_thinktime(cfqd, cic);
-	cfq_update_io_seektime(cfqd, cic, rq);
+	cfq_update_io_seektime(cfqd, cfqq, rq);
 	cfq_update_idle_window(cfqd, cfqq, cic);
 
-	cic->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
+	cfqq->last_request_pos = blk_rq_pos(rq) + blk_rq_sectors(rq);
 
 	if (cfqq == cfqd->active_queue) {
+		if (cfq_cfqq_wait_busy(cfqq)) {
+			cfq_clear_cfqq_wait_busy(cfqq);
+			cfq_mark_cfqq_wait_busy_done(cfqq);
+		}
 		/*
 		 * Remember that we saw a request from this process, but
 		 * don't start queuing just yet. Otherwise we risk seeing lots
@@ -2141,9 +3183,9 @@
 			if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
 			    cfqd->busy_queues > 1) {
 				del_timer(&cfqd->idle_slice_timer);
-			__blk_run_queue(cfqd->queue);
-			}
-			cfq_mark_cfqq_must_dispatch(cfqq);
+				__blk_run_queue(cfqd->queue);
+			} else
+				cfq_mark_cfqq_must_dispatch(cfqq);
 		}
 	} else if (cfq_should_preempt(cfqd, cfqq, rq)) {
 		/*
@@ -2165,10 +3207,9 @@
 	cfq_log_cfqq(cfqd, cfqq, "insert_request");
 	cfq_init_prio_data(cfqq, RQ_CIC(rq)->ioc);
 
-	cfq_add_rq_rb(rq);
-
 	rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
 	list_add_tail(&rq->queuelist, &cfqq->fifo);
+	cfq_add_rq_rb(rq);
 
 	cfq_rq_enqueued(cfqd, cfqq, rq);
 }
@@ -2179,23 +3220,35 @@
  */
 static void cfq_update_hw_tag(struct cfq_data *cfqd)
 {
-	if (rq_in_driver(cfqd) > cfqd->rq_in_driver_peak)
-		cfqd->rq_in_driver_peak = rq_in_driver(cfqd);
+	struct cfq_queue *cfqq = cfqd->active_queue;
+
+	if (rq_in_driver(cfqd) > cfqd->hw_tag_est_depth)
+		cfqd->hw_tag_est_depth = rq_in_driver(cfqd);
+
+	if (cfqd->hw_tag == 1)
+		return;
 
 	if (cfqd->rq_queued <= CFQ_HW_QUEUE_MIN &&
 	    rq_in_driver(cfqd) <= CFQ_HW_QUEUE_MIN)
 		return;
 
+	/*
+	 * If active queue hasn't enough requests and can idle, cfq might not
+	 * dispatch sufficient requests to hardware. Don't zero hw_tag in this
+	 * case
+	 */
+	if (cfqq && cfq_cfqq_idle_window(cfqq) &&
+	    cfqq->dispatched + cfqq->queued[0] + cfqq->queued[1] <
+	    CFQ_HW_QUEUE_MIN && rq_in_driver(cfqd) < CFQ_HW_QUEUE_MIN)
+		return;
+
 	if (cfqd->hw_tag_samples++ < 50)
 		return;
 
-	if (cfqd->rq_in_driver_peak >= CFQ_HW_QUEUE_MIN)
+	if (cfqd->hw_tag_est_depth >= CFQ_HW_QUEUE_MIN)
 		cfqd->hw_tag = 1;
 	else
 		cfqd->hw_tag = 0;
-
-	cfqd->hw_tag_samples = 0;
-	cfqd->rq_in_driver_peak = 0;
 }
 
 static void cfq_completed_request(struct request_queue *q, struct request *rq)
@@ -2206,7 +3259,7 @@
 	unsigned long now;
 
 	now = jiffies;
-	cfq_log_cfqq(cfqd, cfqq, "complete");
+	cfq_log_cfqq(cfqd, cfqq, "complete rqnoidle %d", !!rq_noidle(rq));
 
 	cfq_update_hw_tag(cfqd);
 
@@ -2234,18 +3287,40 @@
 			cfq_set_prio_slice(cfqd, cfqq);
 			cfq_clear_cfqq_slice_new(cfqq);
 		}
+
 		/*
-		 * If there are no requests waiting in this queue, and
-		 * there are other queues ready to issue requests, AND
-		 * those other queues are issuing requests within our
-		 * mean seek distance, give them a chance to run instead
-		 * of idling.
+		 * If this queue consumed its slice and this is last queue
+		 * in the group, wait for next request before we expire
+		 * the queue
+		 */
+		if (cfq_slice_used(cfqq) && cfqq->cfqg->nr_cfqq == 1) {
+			cfqq->slice_end = jiffies + cfqd->cfq_slice_idle;
+			cfq_mark_cfqq_wait_busy(cfqq);
+		}
+
+		/*
+		 * Idling is not enabled on:
+		 * - expired queues
+		 * - idle-priority queues
+		 * - async queues
+		 * - queues with still some requests queued
+		 * - when there is a close cooperator
 		 */
 		if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
 			cfq_slice_expired(cfqd, 1);
-		else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) &&
-			 sync && !rq_noidle(rq))
-			cfq_arm_slice_timer(cfqd);
+		else if (sync && cfqq_empty &&
+			 !cfq_close_cooperator(cfqd, cfqq)) {
+			cfqd->noidle_tree_requires_idle |= !rq_noidle(rq);
+			/*
+			 * Idling is enabled for SYNC_WORKLOAD.
+			 * SYNC_NOIDLE_WORKLOAD idles at the end of the tree
+			 * only if we processed at least one !rq_noidle request
+			 */
+			if (cfqd->serving_type == SYNC_WORKLOAD
+			    || cfqd->noidle_tree_requires_idle
+			    || cfqq->cfqg->nr_cfqq == 1)
+				cfq_arm_slice_timer(cfqd);
+		}
 	}
 
 	if (!rq_in_driver(cfqd))
@@ -2269,12 +3344,10 @@
 			cfqq->ioprio = IOPRIO_NORM;
 	} else {
 		/*
-		 * check if we need to unboost the queue
+		 * unboost the queue (if needed)
 		 */
-		if (cfqq->ioprio_class != cfqq->org_ioprio_class)
-			cfqq->ioprio_class = cfqq->org_ioprio_class;
-		if (cfqq->ioprio != cfqq->org_ioprio)
-			cfqq->ioprio = cfqq->org_ioprio;
+		cfqq->ioprio_class = cfqq->org_ioprio_class;
+		cfqq->ioprio = cfqq->org_ioprio;
 	}
 }
 
@@ -2338,6 +3411,43 @@
 	}
 }
 
+static struct cfq_queue *
+cfq_merge_cfqqs(struct cfq_data *cfqd, struct cfq_io_context *cic,
+		struct cfq_queue *cfqq)
+{
+	cfq_log_cfqq(cfqd, cfqq, "merging with queue %p", cfqq->new_cfqq);
+	cic_set_cfqq(cic, cfqq->new_cfqq, 1);
+	cfq_mark_cfqq_coop(cfqq->new_cfqq);
+	cfq_put_queue(cfqq);
+	return cic_to_cfqq(cic, 1);
+}
+
+static int should_split_cfqq(struct cfq_queue *cfqq)
+{
+	if (cfqq->seeky_start &&
+	    time_after(jiffies, cfqq->seeky_start + CFQQ_COOP_TOUT))
+		return 1;
+	return 0;
+}
+
+/*
+ * Returns NULL if a new cfqq should be allocated, or the old cfqq if this
+ * was the last process referring to said cfqq.
+ */
+static struct cfq_queue *
+split_cfqq(struct cfq_io_context *cic, struct cfq_queue *cfqq)
+{
+	if (cfqq_process_refs(cfqq) == 1) {
+		cfqq->seeky_start = 0;
+		cfqq->pid = current->pid;
+		cfq_clear_cfqq_coop(cfqq);
+		return cfqq;
+	}
+
+	cic_set_cfqq(cic, NULL, 1);
+	cfq_put_queue(cfqq);
+	return NULL;
+}
 /*
  * Allocate cfq data structures associated with this request.
  */
@@ -2360,10 +3470,30 @@
 	if (!cic)
 		goto queue_fail;
 
+new_queue:
 	cfqq = cic_to_cfqq(cic, is_sync);
 	if (!cfqq || cfqq == &cfqd->oom_cfqq) {
 		cfqq = cfq_get_queue(cfqd, is_sync, cic->ioc, gfp_mask);
 		cic_set_cfqq(cic, cfqq, is_sync);
+	} else {
+		/*
+		 * If the queue was seeky for too long, break it apart.
+		 */
+		if (cfq_cfqq_coop(cfqq) && should_split_cfqq(cfqq)) {
+			cfq_log_cfqq(cfqd, cfqq, "breaking apart cfqq");
+			cfqq = split_cfqq(cic, cfqq);
+			if (!cfqq)
+				goto new_queue;
+		}
+
+		/*
+		 * Check to see if this queue is scheduled to merge with
+		 * another, closely cooperating queue.  The merging of
+		 * queues happens here as it must be done in process context.
+		 * The reference on new_cfqq was taken in merge_cfqqs.
+		 */
+		if (cfqq->new_cfqq)
+			cfqq = cfq_merge_cfqqs(cfqd, cic, cfqq);
 	}
 
 	cfqq->allocated[rw]++;
@@ -2438,6 +3568,11 @@
 		 */
 		if (!RB_EMPTY_ROOT(&cfqq->sort_list))
 			goto out_kick;
+
+		/*
+		 * Queue depth flag is reset only when the idle didn't succeed
+		 */
+		cfq_clear_cfqq_deep(cfqq);
 	}
 expire:
 	cfq_slice_expired(cfqd, timed_out);
@@ -2468,6 +3603,11 @@
 		cfq_put_queue(cfqd->async_idle_cfqq);
 }
 
+static void cfq_cfqd_free(struct rcu_head *head)
+{
+	kfree(container_of(head, struct cfq_data, rcu));
+}
+
 static void cfq_exit_queue(struct elevator_queue *e)
 {
 	struct cfq_data *cfqd = e->elevator_data;
@@ -2489,25 +3629,49 @@
 	}
 
 	cfq_put_async_queues(cfqd);
+	cfq_release_cfq_groups(cfqd);
+	blkiocg_del_blkio_group(&cfqd->root_group.blkg);
 
 	spin_unlock_irq(q->queue_lock);
 
 	cfq_shutdown_timer_wq(cfqd);
 
-	kfree(cfqd);
+	/* Wait for cfqg->blkg->key accessors to exit their grace periods. */
+	call_rcu(&cfqd->rcu, cfq_cfqd_free);
 }
 
 static void *cfq_init_queue(struct request_queue *q)
 {
 	struct cfq_data *cfqd;
-	int i;
+	int i, j;
+	struct cfq_group *cfqg;
+	struct cfq_rb_root *st;
 
 	cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
 	if (!cfqd)
 		return NULL;
 
-	cfqd->service_tree = CFQ_RB_ROOT;
+	/* Init root service tree */
+	cfqd->grp_service_tree = CFQ_RB_ROOT;
 
+	/* Init root group */
+	cfqg = &cfqd->root_group;
+	for_each_cfqg_st(cfqg, i, j, st)
+		*st = CFQ_RB_ROOT;
+	RB_CLEAR_NODE(&cfqg->rb_node);
+
+	/* Give preference to root group over other groups */
+	cfqg->weight = 2*BLKIO_WEIGHT_DEFAULT;
+
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+	/*
+	 * Take a reference to root group which we never drop. This is just
+	 * to make sure that cfq_put_cfqg() does not try to kfree root group
+	 */
+	atomic_set(&cfqg->ref, 1);
+	blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
+					0);
+#endif
 	/*
 	 * Not strictly needed (since RB_ROOT just clears the node and we
 	 * zeroed cfqd on alloc), but better be safe in case someone decides
@@ -2523,6 +3687,7 @@
 	 */
 	cfq_init_cfqq(cfqd, &cfqd->oom_cfqq, 1, 0);
 	atomic_inc(&cfqd->oom_cfqq.ref);
+	cfq_link_cfqq_cfqg(&cfqd->oom_cfqq, &cfqd->root_group);
 
 	INIT_LIST_HEAD(&cfqd->cic_list);
 
@@ -2544,8 +3709,10 @@
 	cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
 	cfqd->cfq_slice_idle = cfq_slice_idle;
 	cfqd->cfq_latency = 1;
-	cfqd->hw_tag = 1;
+	cfqd->cfq_group_isolation = 0;
+	cfqd->hw_tag = -1;
 	cfqd->last_end_sync_rq = jiffies;
+	INIT_RCU_HEAD(&cfqd->rcu);
 	return cfqd;
 }
 
@@ -2614,6 +3781,7 @@
 SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1);
 SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0);
 SHOW_FUNCTION(cfq_low_latency_show, cfqd->cfq_latency, 0);
+SHOW_FUNCTION(cfq_group_isolation_show, cfqd->cfq_group_isolation, 0);
 #undef SHOW_FUNCTION
 
 #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV)			\
@@ -2646,6 +3814,7 @@
 STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1,
 		UINT_MAX, 0);
 STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
+STORE_FUNCTION(cfq_group_isolation_store, &cfqd->cfq_group_isolation, 0, 1, 0);
 #undef STORE_FUNCTION
 
 #define CFQ_ATTR(name) \
@@ -2662,6 +3831,7 @@
 	CFQ_ATTR(slice_async_rq),
 	CFQ_ATTR(slice_idle),
 	CFQ_ATTR(low_latency),
+	CFQ_ATTR(group_isolation),
 	__ATTR_NULL
 };
 
@@ -2691,6 +3861,17 @@
 	.elevator_owner =	THIS_MODULE,
 };
 
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+static struct blkio_policy_type blkio_policy_cfq = {
+	.ops = {
+		.blkio_unlink_group_fn =	cfq_unlink_blkio_group,
+		.blkio_update_group_weight_fn =	cfq_update_blkio_group_weight,
+	},
+};
+#else
+static struct blkio_policy_type blkio_policy_cfq;
+#endif
+
 static int __init cfq_init(void)
 {
 	/*
@@ -2705,6 +3886,7 @@
 		return -ENOMEM;
 
 	elv_register(&iosched_cfq);
+	blkio_policy_register(&blkio_policy_cfq);
 
 	return 0;
 }
@@ -2712,6 +3894,7 @@
 static void __exit cfq_exit(void)
 {
 	DECLARE_COMPLETION_ONSTACK(all_gone);
+	blkio_policy_unregister(&blkio_policy_cfq);
 	elv_unregister(&iosched_cfq);
 	ioc_gone = &all_gone;
 	/* ioc_gone's update must be visible before reading ioc_count */
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 9bd086c..4eb8e9e 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -747,6 +747,8 @@
 		return compat_put_uint(arg, bdev_io_opt(bdev));
 	case BLKALIGNOFF:
 		return compat_put_int(arg, bdev_alignment_offset(bdev));
+	case BLKDISCARDZEROES:
+		return compat_put_uint(arg, bdev_discard_zeroes_data(bdev));
 	case BLKFLSBUF:
 	case BLKROSET:
 	case BLKDISCARD:
diff --git a/block/elevator.c b/block/elevator.c
index a847046..9ad5ccc 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -154,10 +154,7 @@
 
 		spin_unlock(&elv_list_lock);
 
-		if (!strcmp(name, "anticipatory"))
-			sprintf(elv, "as-iosched");
-		else
-			sprintf(elv, "%s-iosched", name);
+		sprintf(elv, "%s-iosched", name);
 
 		request_module("%s", elv);
 		spin_lock(&elv_list_lock);
@@ -193,10 +190,7 @@
 	 * Be backwards-compatible with previous kernels, so users
 	 * won't get the wrong elevator.
 	 */
-	if (!strcmp(str, "as"))
-		strcpy(chosen_elevator, "anticipatory");
-	else
-		strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
+	strncpy(chosen_elevator, str, sizeof(chosen_elevator) - 1);
 	return 1;
 }
 
diff --git a/block/genhd.c b/block/genhd.c
index 517e433..b11a4ad 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -861,12 +861,23 @@
 	return sprintf(buf, "%d\n", queue_alignment_offset(disk->queue));
 }
 
+static ssize_t disk_discard_alignment_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct gendisk *disk = dev_to_disk(dev);
+
+	return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue));
+}
+
 static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL);
 static DEVICE_ATTR(ext_range, S_IRUGO, disk_ext_range_show, NULL);
 static DEVICE_ATTR(removable, S_IRUGO, disk_removable_show, NULL);
 static DEVICE_ATTR(ro, S_IRUGO, disk_ro_show, NULL);
 static DEVICE_ATTR(size, S_IRUGO, part_size_show, NULL);
 static DEVICE_ATTR(alignment_offset, S_IRUGO, disk_alignment_offset_show, NULL);
+static DEVICE_ATTR(discard_alignment, S_IRUGO, disk_discard_alignment_show,
+		   NULL);
 static DEVICE_ATTR(capability, S_IRUGO, disk_capability_show, NULL);
 static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL);
 static DEVICE_ATTR(inflight, S_IRUGO, part_inflight_show, NULL);
@@ -887,6 +898,7 @@
 	&dev_attr_ro.attr,
 	&dev_attr_size.attr,
 	&dev_attr_alignment_offset.attr,
+	&dev_attr_discard_alignment.attr,
 	&dev_attr_capability.attr,
 	&dev_attr_stat.attr,
 	&dev_attr_inflight.attr,
diff --git a/block/ioctl.c b/block/ioctl.c
index 1f4d1de..be48ea5 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -280,6 +280,8 @@
 		return put_uint(arg, bdev_io_opt(bdev));
 	case BLKALIGNOFF:
 		return put_int(arg, bdev_alignment_offset(bdev));
+	case BLKDISCARDZEROES:
+		return put_uint(arg, bdev_discard_zeroes_data(bdev));
 	case BLKSECTGET:
 		return put_ushort(arg, queue_max_sectors(bdev_get_queue(bdev)));
 	case BLKRASET:
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index e5b1001..a8b5a10 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -35,7 +35,9 @@
 struct blk_cmd_filter {
 	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
 	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-} blk_default_cmd_filter;
+};
+
+static struct blk_cmd_filter blk_default_cmd_filter;
 
 /* Command group 3 is reserved and should never be used.  */
 const unsigned char scsi_command_size_tbl[8] =
@@ -675,7 +677,7 @@
 }
 EXPORT_SYMBOL(scsi_cmd_ioctl);
 
-int __init blk_scsi_ioctl_init(void)
+static int __init blk_scsi_ioctl_init(void)
 {
 	blk_set_cmd_filter_defaults(&blk_default_cmd_filter);
 	return 0;
diff --git a/crypto/async_tx/Kconfig b/crypto/async_tx/Kconfig
index e5aeb2b..e28e276 100644
--- a/crypto/async_tx/Kconfig
+++ b/crypto/async_tx/Kconfig
@@ -23,3 +23,8 @@
 	select ASYNC_CORE
 	select ASYNC_PQ
 
+config ASYNC_TX_DISABLE_PQ_VAL_DMA
+	bool
+
+config ASYNC_TX_DISABLE_XOR_VAL_DMA
+	bool
diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
index 6b5cc4f..ec87f53 100644
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -240,6 +240,16 @@
 }
 EXPORT_SYMBOL_GPL(async_gen_syndrome);
 
+static inline struct dma_chan *
+pq_val_chan(struct async_submit_ctl *submit, struct page **blocks, int disks, size_t len)
+{
+	#ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA
+	return NULL;
+	#endif
+	return async_tx_find_channel(submit, DMA_PQ_VAL, NULL, 0,  blocks,
+				     disks, len);
+}
+
 /**
  * async_syndrome_val - asynchronously validate a raid6 syndrome
  * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
@@ -260,9 +270,7 @@
 		   size_t len, enum sum_check_flags *pqres, struct page *spare,
 		   struct async_submit_ctl *submit)
 {
-	struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ_VAL,
-						      NULL, 0,  blocks, disks,
-						      len);
+	struct dma_chan *chan = pq_val_chan(submit, blocks, disks, len);
 	struct dma_device *device = chan ? chan->device : NULL;
 	struct dma_async_tx_descriptor *tx;
 	unsigned char coefs[disks-2];
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 79182dc..079ae8c 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -234,6 +234,17 @@
 		memcmp(a, a + 4, len - 4) == 0);
 }
 
+static inline struct dma_chan *
+xor_val_chan(struct async_submit_ctl *submit, struct page *dest,
+		 struct page **src_list, int src_cnt, size_t len)
+{
+	#ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA
+	return NULL;
+	#endif
+	return async_tx_find_channel(submit, DMA_XOR_VAL, &dest, 1, src_list,
+				     src_cnt, len);
+}
+
 /**
  * async_xor_val - attempt a xor parity check with a dma engine.
  * @dest: destination page used if the xor is performed synchronously
@@ -255,9 +266,7 @@
 	      int src_cnt, size_t len, enum sum_check_flags *result,
 	      struct async_submit_ctl *submit)
 {
-	struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR_VAL,
-						      &dest, 1, src_list,
-						      src_cnt, len);
+	struct dma_chan *chan = xor_val_chan(submit, dest, src_list, src_cnt, len);
 	struct dma_device *device = chan ? chan->device : NULL;
 	struct dma_async_tx_descriptor *tx = NULL;
 	dma_addr_t *dma_src = NULL;
diff --git a/crypto/gcm.c b/crypto/gcm.c
index 5fc3292..c654713 100644
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -40,7 +40,7 @@
 struct crypto_gcm_ghash_ctx {
 	unsigned int cryptlen;
 	struct scatterlist *src;
-	crypto_completion_t complete;
+	void (*complete)(struct aead_request *req, int err);
 };
 
 struct crypto_gcm_req_priv_ctx {
@@ -267,23 +267,26 @@
 	return crypto_ahash_final(ahreq);
 }
 
-static void gcm_hash_final_done(struct crypto_async_request *areq,
-				int err)
+static void __gcm_hash_final_done(struct aead_request *req, int err)
 {
-	struct aead_request *req = areq->data;
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 	struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
 
 	if (!err)
 		crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
 
-	gctx->complete(areq, err);
+	gctx->complete(req, err);
 }
 
-static void gcm_hash_len_done(struct crypto_async_request *areq,
-			      int err)
+static void gcm_hash_final_done(struct crypto_async_request *areq, int err)
 {
 	struct aead_request *req = areq->data;
+
+	__gcm_hash_final_done(req, err);
+}
+
+static void __gcm_hash_len_done(struct aead_request *req, int err)
+{
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 
 	if (!err) {
@@ -292,13 +295,18 @@
 			return;
 	}
 
-	gcm_hash_final_done(areq, err);
+	__gcm_hash_final_done(req, err);
 }
 
-static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq,
-				       int err)
+static void gcm_hash_len_done(struct crypto_async_request *areq, int err)
 {
 	struct aead_request *req = areq->data;
+
+	__gcm_hash_len_done(req, err);
+}
+
+static void __gcm_hash_crypt_remain_done(struct aead_request *req, int err)
+{
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 
 	if (!err) {
@@ -307,13 +315,19 @@
 			return;
 	}
 
-	gcm_hash_len_done(areq, err);
+	__gcm_hash_len_done(req, err);
 }
 
-static void gcm_hash_crypt_done(struct crypto_async_request *areq,
-				int err)
+static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq,
+				       int err)
 {
 	struct aead_request *req = areq->data;
+
+	__gcm_hash_crypt_remain_done(req, err);
+}
+
+static void __gcm_hash_crypt_done(struct aead_request *req, int err)
+{
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 	struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
 	unsigned int remain;
@@ -327,13 +341,18 @@
 			return;
 	}
 
-	gcm_hash_crypt_remain_done(areq, err);
+	__gcm_hash_crypt_remain_done(req, err);
 }
 
-static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq,
-					   int err)
+static void gcm_hash_crypt_done(struct crypto_async_request *areq, int err)
 {
 	struct aead_request *req = areq->data;
+
+	__gcm_hash_crypt_done(req, err);
+}
+
+static void __gcm_hash_assoc_remain_done(struct aead_request *req, int err)
+{
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 	struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
 	crypto_completion_t complete;
@@ -350,15 +369,21 @@
 	}
 
 	if (remain)
-		gcm_hash_crypt_done(areq, err);
+		__gcm_hash_crypt_done(req, err);
 	else
-		gcm_hash_crypt_remain_done(areq, err);
+		__gcm_hash_crypt_remain_done(req, err);
 }
 
-static void gcm_hash_assoc_done(struct crypto_async_request *areq,
-				int err)
+static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq,
+				       int err)
 {
 	struct aead_request *req = areq->data;
+
+	__gcm_hash_assoc_remain_done(req, err);
+}
+
+static void __gcm_hash_assoc_done(struct aead_request *req, int err)
+{
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 	unsigned int remain;
 
@@ -371,13 +396,18 @@
 			return;
 	}
 
-	gcm_hash_assoc_remain_done(areq, err);
+	__gcm_hash_assoc_remain_done(req, err);
 }
 
-static void gcm_hash_init_done(struct crypto_async_request *areq,
-			       int err)
+static void gcm_hash_assoc_done(struct crypto_async_request *areq, int err)
 {
 	struct aead_request *req = areq->data;
+
+	__gcm_hash_assoc_done(req, err);
+}
+
+static void __gcm_hash_init_done(struct aead_request *req, int err)
+{
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 	crypto_completion_t complete;
 	unsigned int remain = 0;
@@ -393,9 +423,16 @@
 	}
 
 	if (remain)
-		gcm_hash_assoc_done(areq, err);
+		__gcm_hash_assoc_done(req, err);
 	else
-		gcm_hash_assoc_remain_done(areq, err);
+		__gcm_hash_assoc_remain_done(req, err);
+}
+
+static void gcm_hash_init_done(struct crypto_async_request *areq, int err)
+{
+	struct aead_request *req = areq->data;
+
+	__gcm_hash_init_done(req, err);
 }
 
 static int gcm_hash(struct aead_request *req,
@@ -457,10 +494,8 @@
 				 crypto_aead_authsize(aead), 1);
 }
 
-static void gcm_enc_hash_done(struct crypto_async_request *areq,
-				     int err)
+static void gcm_enc_hash_done(struct aead_request *req, int err)
 {
-	struct aead_request *req = areq->data;
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 
 	if (!err)
@@ -469,8 +504,7 @@
 	aead_request_complete(req, err);
 }
 
-static void gcm_encrypt_done(struct crypto_async_request *areq,
-				     int err)
+static void gcm_encrypt_done(struct crypto_async_request *areq, int err)
 {
 	struct aead_request *req = areq->data;
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
@@ -479,9 +513,13 @@
 		err = gcm_hash(req, pctx);
 		if (err == -EINPROGRESS || err == -EBUSY)
 			return;
+		else if (!err) {
+			crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16);
+			gcm_enc_copy_hash(req, pctx);
+		}
 	}
 
-	gcm_enc_hash_done(areq, err);
+	aead_request_complete(req, err);
 }
 
 static int crypto_gcm_encrypt(struct aead_request *req)
@@ -538,9 +576,8 @@
 	aead_request_complete(req, err);
 }
 
-static void gcm_dec_hash_done(struct crypto_async_request *areq, int err)
+static void gcm_dec_hash_done(struct aead_request *req, int err)
 {
-	struct aead_request *req = areq->data;
 	struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req);
 	struct ablkcipher_request *abreq = &pctx->u.abreq;
 	struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx;
@@ -552,9 +589,11 @@
 		err = crypto_ablkcipher_decrypt(abreq);
 		if (err == -EINPROGRESS || err == -EBUSY)
 			return;
+		else if (!err)
+			err = crypto_gcm_verify(req, pctx);
 	}
 
-	gcm_decrypt_done(areq, err);
+	aead_request_complete(req, err);
 }
 
 static int crypto_gcm_decrypt(struct aead_request *req)
diff --git a/crypto/proc.c b/crypto/proc.c
index 5dc07e4..1c38733 100644
--- a/crypto/proc.c
+++ b/crypto/proc.c
@@ -25,28 +25,22 @@
 #ifdef CONFIG_CRYPTO_FIPS
 static struct ctl_table crypto_sysctl_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "fips_enabled",
 		.data           = &fips_enabled,
 		.maxlen         = sizeof(int),
 		.mode           = 0444,
-		.proc_handler   = &proc_dointvec
+		.proc_handler   = proc_dointvec
 	},
-	{
-		.ctl_name = 0,
-	},
+	{}
 };
 
 static struct ctl_table crypto_dir_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "crypto",
 		.mode           = 0555,
 		.child          = crypto_sysctl_table
 	},
-	{
-		.ctl_name = 0,
-	},
+	{}
 };
 
 static struct ctl_table_header *crypto_sysctls;
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index cd80d1d..57bdaf6 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -203,8 +203,9 @@
 	{{"_BCT", 1, ACPI_RTYPE_INTEGER}},
 	{{"_BDN", 0, ACPI_RTYPE_INTEGER}},
 	{{"_BFS", 1, 0}},
-	{{"_BIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (9 Int),(4 Str) */
-			  {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, ACPI_RTYPE_STRING}, 4,0}},
+	{{"_BIF", 0, ACPI_RTYPE_PACKAGE} }, /* Fixed-length (9 Int),(4 Str/Buf) */
+			  {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9,
+			     ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER}, 4, 0} },
 
 	{{"_BIX", 0, ACPI_RTYPE_PACKAGE}},	/* Fixed-length (16 Int),(4 Str) */
 	{{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, ACPI_RTYPE_STRING}, 4,
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index e56b2a7..23e5a05 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -224,6 +224,7 @@
 	 * _OSI(Linux) helps sound
 	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"),
 	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"),
+	 * T400, T500
 	 * _OSI(Linux) has Linux specific hooks
 	 * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
 	 * _OSI(Linux) is a NOP:
@@ -254,6 +255,22 @@
 		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
 		},
 	},
+	{
+	.callback = dmi_enable_osi_linux,
+	.ident = "Lenovo ThinkPad T400",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T400"),
+		},
+	},
+	{
+	.callback = dmi_enable_osi_linux,
+	.ident = "Lenovo ThinkPad T500",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		     DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T500"),
+		},
+	},
 	{}
 };
 
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 202dd0c..2be2fb6 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -283,22 +283,24 @@
 
 int __init acpi_numa_init(void)
 {
+	int ret = 0;
+
 	/* SRAT: Static Resource Affinity Table */
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
 				      acpi_parse_x2apic_affinity, NR_CPUS);
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
 				      acpi_parse_processor_affinity, NR_CPUS);
-		acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
-				      acpi_parse_memory_affinity,
-				      NR_NODE_MEMBLKS);
+		ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
+					    acpi_parse_memory_affinity,
+					    NR_NODE_MEMBLKS);
 	}
 
 	/* SLIT: System Locality Information Table */
 	acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
 
 	acpi_numa_arch_fixup();
-	return 0;
+	return ret;
 }
 
 int acpi_get_pxm(acpi_handle h)
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 4cc1b81..5f2c379 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -430,6 +430,14 @@
 	},
 	{
 	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard Compaq Presario C700 Notebook PC",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario C700 Notebook PC"),
+		},
+	},
+	{
+	.callback = init_set_sci_en_on_resume,
 	.ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 51eea30..85844d0 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menuconfig ATA
-	tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
+	tristate "Serial ATA and Parallel ATA drivers"
 	depends on HAS_IOMEM
 	depends on BLOCK
 	depends on !(M32R || M68K) || BROKEN
@@ -374,8 +374,8 @@
 	  If unsure, say N.
 
 config PATA_HPT37X
-	tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "HPT 370/370A/371/372/374/302 PATA support"
+	depends on PCI
 	help
 	  This option enables support for the majority of the later HPT
 	  PATA controllers via the new ATA layer.
@@ -383,8 +383,8 @@
 	  If unsure, say N.
 
 config PATA_HPT3X2N
-	tristate "HPT 372N/302N PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "HPT 372N/302N PATA support"
+	depends on PCI
 	help
 	  This option enables support for the N variant HPT PATA
 	  controllers via the new ATA layer
@@ -401,7 +401,7 @@
 	  If unsure, say N.
 
 config PATA_HPT3X3_DMA
-	bool "HPT 343/363 DMA support (Experimental)"
+	bool "HPT 343/363 DMA support"
 	depends on PATA_HPT3X3
 	help
 	  This option enables DMA support for the HPT343/363
@@ -510,8 +510,8 @@
 	  If unsure, say N.
 
 config PATA_NINJA32
-	tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Ninja32/Delkin Cardbus ATA support"
+	depends on PCI
 	help
 	  This option enables support for the Ninja32, Delkin and
 	  possibly other brands of Cardbus ATA adapter
@@ -573,6 +573,14 @@
 
 	  If unsure, say N.
 
+config PATA_PDC2027X
+	tristate "Promise PATA 2027x support"
+	depends on PCI
+	help
+	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
+
+	  If unsure, say N.
+
 config PATA_PDC_OLD
 	tristate "Older Promise PATA controller support"
 	depends on PCI
@@ -643,14 +651,6 @@
 
 	  If unsure, say N.
 
-config PATA_PDC2027X
-	tristate "Promise PATA 2027x support"
-	depends on PCI
-	help
-	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
-
-	  If unsure, say N.
-
 config PATA_SIL680
 	tristate "CMD / Silicon Image 680 PATA support"
 	depends on PCI
@@ -667,6 +667,15 @@
 
 	  If unsure, say N.
 
+config PATA_TOSHIBA
+	tristate "Toshiba Piccolo support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  Support for the Toshiba Piccolo controllers. Currently only the
+	  primary channel is supported by this driver.
+
+	  If unsure, say N.
+
 config PATA_VIA
 	tristate "VIA PATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index e439141..fc936d4 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -64,6 +64,7 @@
 obj-$(CONFIG_PATA_SC1200)	+= pata_sc1200.o
 obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
 obj-$(CONFIG_PATA_SIL680)	+= pata_sil680.o
+obj-$(CONFIG_PATA_TOSHIBA)	+= pata_piccolo.o
 obj-$(CONFIG_PATA_VIA)		+= pata_via.o
 obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
 obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a3241a1..b8bea10 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -113,6 +113,7 @@
 	board_ahci_mcp65	= 6,
 	board_ahci_nopmp	= 7,
 	board_ahci_yesncq	= 8,
+	board_ahci_nosntf	= 9,
 
 	/* global controller registers */
 	HOST_CAP		= 0x00, /* host capabilities */
@@ -235,6 +236,7 @@
 	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
 	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
 							link offline */
+	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
 
 	/* ap->flags bits */
 
@@ -508,7 +510,7 @@
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	/* board_ahci_yesncq */
+	[board_ahci_yesncq] =
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_YES_NCQ),
 		.flags		= AHCI_FLAG_COMMON,
@@ -516,6 +518,14 @@
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
+	[board_ahci_nosntf] =
+	{
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_SNTF),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 };
 
 static const struct pci_device_id ahci_pci_tbl[] = {
@@ -531,7 +541,7 @@
 	{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
 	{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
 	{ PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
-	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
+	{ PCI_VDEVICE(INTEL, 0x2822), board_ahci_nosntf }, /* ICH8 */
 	{ PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
 	{ PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
 	{ PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
@@ -849,6 +859,12 @@
 		cap &= ~HOST_CAP_PMP;
 	}
 
+	if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
+		dev_printk(KERN_INFO, &pdev->dev,
+			   "controller can't do SNTF, turning off CAP_SNTF\n");
+		cap &= ~HOST_CAP_SNTF;
+	}
+
 	if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
 	    port_map != 1) {
 		dev_printk(KERN_INFO, &pdev->dev,
@@ -2988,6 +3004,14 @@
 	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
 		return -ENODEV;
 
+	/* Promise's PDC42819 is a SAS/SATA controller that has an AHCI mode.
+	 * At the moment, we can only use the AHCI mode. Let the users know
+	 * that for SAS drives they're out of luck.
+	 */
+	if (pdev->vendor == PCI_VENDOR_ID_PROMISE)
+		dev_printk(KERN_INFO, &pdev->dev, "PDC42819 "
+			   "can only drive SATA devices with this driver\n");
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index ecfd22b..12e26c3 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -168,9 +168,12 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA,    PCI_DEVICE_ID_VIA_82C561), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_OPTI,   PCI_DEVICE_ID_OPTI_82C558), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_CENATEK,PCI_DEVICE_ID_CENATEK_IDE), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO), },
+#if !defined(CONFIG_PATA_TOSHIBA) && !defined(CONFIG_PATA_TOSHIBA_MODULE)
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3),  },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5),  },
+#endif	
 	/* Must come last. If you add entries adjust this table appropriately */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
 	{ 0, },
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 9ac4e37..0c6155f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -869,10 +869,10 @@
 				(timings[pio][1] << 8);
 		}
 
-		if (ap->udma_mask) {
+		if (ap->udma_mask)
 			udma_enable &= ~(1 << devid);
-			pci_write_config_word(dev, master_port, master_data);
-		}
+
+		pci_write_config_word(dev, master_port, master_data);
 	}
 	/* Don't scribble on 0x48 if the controller does not support UDMA */
 	if (ap->udma_mask)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index b0882cd..1245838 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -807,12 +807,11 @@
  * EH context.
  *
  * RETURNS:
- * 0 on success, -errno on failure.
+ * 0 on success, -ENOENT if _SDD doesn't exist, -errno on failure.
  */
 static int ata_acpi_push_id(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->link->ap;
-	int err;
 	acpi_status status;
 	struct acpi_object_list input;
 	union acpi_object in_params[1];
@@ -835,12 +834,16 @@
 	status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
 
-	err = ACPI_FAILURE(status) ? -EIO : 0;
-	if (err < 0)
+	if (status == AE_NOT_FOUND)
+		return -ENOENT;
+
+	if (ACPI_FAILURE(status)) {
 		ata_dev_printk(dev, KERN_WARNING,
 			       "ACPI _SDD failed (AE 0x%x)\n", status);
+		return -EIO;
+	}
 
-	return err;
+	return 0;
 }
 
 /**
@@ -971,7 +974,7 @@
 	/* do _SDD if SATA */
 	if (acpi_sata) {
 		rc = ata_acpi_push_id(dev);
-		if (rc)
+		if (rc && rc != -ENOENT)
 			goto acpi_err;
 	}
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dc72690..22ff51b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6616,6 +6616,13 @@
 {
 	ata_parse_force_param();
 
+	/*
+	 * FIXME: In UP case, there is only one workqueue thread and if you
+	 * have more than one PIO device, latency is bloody awful, with
+	 * occasional multi-second "hiccups" as one PIO device waits for
+	 * another.  It's an ugly wart that users DO occasionally complain
+	 * about; luckily most users have at most one PIO polled device.
+	 */
 	ata_wq = create_workqueue("ata");
 	if (!ata_wq)
 		goto free_force_tbl;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bba2ae5..0ea97c9 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -110,6 +110,13 @@
 	ULONG_MAX,
 };
 
+static const unsigned long ata_eh_flush_timeouts[] = {
+	15000,	/* be generous with flush */
+	15000,  /* ditto */
+	30000,	/* and even more generous */
+	ULONG_MAX,
+};
+
 static const unsigned long ata_eh_other_timeouts[] = {
 	 5000,	/* same rationale as identify timeout */
 	10000,	/* ditto */
@@ -147,6 +154,8 @@
 	  .timeouts = ata_eh_other_timeouts, },
 	{ .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS),
 	  .timeouts = ata_eh_other_timeouts, },
+	{ .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT),
+	  .timeouts = ata_eh_flush_timeouts },
 };
 #undef CMDS
 
@@ -3112,6 +3121,82 @@
 	return 0;
 }
 
+/**
+ *	ata_eh_maybe_retry_flush - Retry FLUSH if necessary
+ *	@dev: ATA device which may need FLUSH retry
+ *
+ *	If @dev failed FLUSH, it needs to be reported upper layer
+ *	immediately as it means that @dev failed to remap and already
+ *	lost at least a sector and further FLUSH retrials won't make
+ *	any difference to the lost sector.  However, if FLUSH failed
+ *	for other reasons, for example transmission error, FLUSH needs
+ *	to be retried.
+ *
+ *	This function determines whether FLUSH failure retry is
+ *	necessary and performs it if so.
+ *
+ *	RETURNS:
+ *	0 if EH can continue, -errno if EH needs to be repeated.
+ */
+static int ata_eh_maybe_retry_flush(struct ata_device *dev)
+{
+	struct ata_link *link = dev->link;
+	struct ata_port *ap = link->ap;
+	struct ata_queued_cmd *qc;
+	struct ata_taskfile tf;
+	unsigned int err_mask;
+	int rc = 0;
+
+	/* did flush fail for this device? */
+	if (!ata_tag_valid(link->active_tag))
+		return 0;
+
+	qc = __ata_qc_from_tag(ap, link->active_tag);
+	if (qc->dev != dev || (qc->tf.command != ATA_CMD_FLUSH_EXT &&
+			       qc->tf.command != ATA_CMD_FLUSH))
+		return 0;
+
+	/* if the device failed it, it should be reported to upper layers */
+	if (qc->err_mask & AC_ERR_DEV)
+		return 0;
+
+	/* flush failed for some other reason, give it another shot */
+	ata_tf_init(dev, &tf);
+
+	tf.command = qc->tf.command;
+	tf.flags |= ATA_TFLAG_DEVICE;
+	tf.protocol = ATA_PROT_NODATA;
+
+	ata_dev_printk(dev, KERN_WARNING, "retrying FLUSH 0x%x Emask 0x%x\n",
+		       tf.command, qc->err_mask);
+
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	if (!err_mask) {
+		/*
+		 * FLUSH is complete but there's no way to
+		 * successfully complete a failed command from EH.
+		 * Making sure retry is allowed at least once and
+		 * retrying it should do the trick - whatever was in
+		 * the cache is already on the platter and this won't
+		 * cause infinite loop.
+		 */
+		qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1);
+	} else {
+		ata_dev_printk(dev, KERN_WARNING, "FLUSH failed Emask 0x%x\n",
+			       err_mask);
+		rc = -EIO;
+
+		/* if device failed it, report it to upper layers */
+		if (err_mask & AC_ERR_DEV) {
+			qc->err_mask |= AC_ERR_DEV;
+			qc->result_tf = tf;
+			if (!(ap->pflags & ATA_PFLAG_FROZEN))
+				rc = 0;
+		}
+	}
+	return rc;
+}
+
 static int ata_link_nr_enabled(struct ata_link *link)
 {
 	struct ata_device *dev;
@@ -3455,6 +3540,15 @@
 			}
 		}
 
+		/* retry flush if necessary */
+		ata_for_each_dev(dev, link, ALL) {
+			if (dev->class != ATA_DEV_ATA)
+				continue;
+			rc = ata_eh_maybe_retry_flush(dev);
+			if (rc)
+				goto dev_fail;
+		}
+
 		/* configure link power saving */
 		if (ehc->i.action & ATA_EH_LPM)
 			ata_for_each_dev(dev, link, ALL)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b4ee28d..62e6b9e 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -47,6 +47,7 @@
 #include <linux/hdreg.h>
 #include <linux/uaccess.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #include "libata.h"
 
@@ -154,8 +155,7 @@
 	 */
 	for (i = 1; i < ARRAY_SIZE(link_pm_policy); i++) {
 		const int len = strlen(link_pm_policy[i].name);
-		if (strncmp(link_pm_policy[i].name, buf, len) == 0 &&
-		   buf[len] == '\n') {
+		if (strncmp(link_pm_policy[i].name, buf, len) == 0) {
 			policy = link_pm_policy[i].value;
 			break;
 		}
@@ -1964,6 +1964,7 @@
 		0x80,	/* page 0x80, unit serial no page */
 		0x83,	/* page 0x83, device ident page */
 		0x89,	/* page 0x89, ata info page */
+		0xb0,	/* page 0xb0, block limits page */
 		0xb1,	/* page 0xb1, block device characteristics page */
 	};
 
@@ -2085,6 +2086,43 @@
 	return 0;
 }
 
+static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
+{
+	u32 min_io_sectors;
+
+	rbuf[1] = 0xb0;
+	rbuf[3] = 0x3c;		/* required VPD size with unmap support */
+
+	/*
+	 * Optimal transfer length granularity.
+	 *
+	 * This is always one physical block, but for disks with a smaller
+	 * logical than physical sector size we need to figure out what the
+	 * latter is.
+	 */
+	if (ata_id_has_large_logical_sectors(args->id))
+		min_io_sectors = ata_id_logical_per_physical_sectors(args->id);
+	else
+		min_io_sectors = 1;
+	put_unaligned_be16(min_io_sectors, &rbuf[6]);
+
+	/*
+	 * Optimal unmap granularity.
+	 *
+	 * The ATA spec doesn't even know about a granularity or alignment
+	 * for the TRIM command.  We can leave away most of the unmap related
+	 * VPD page entries, but we have specifify a granularity to signal
+	 * that we support some form of unmap - in thise case via WRITE SAME
+	 * with the unmap bit set.
+	 */
+	if (ata_id_has_trim(args->id)) {
+		put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
+		put_unaligned_be32(1, &rbuf[28]);
+	}
+
+	return 0;
+}
+
 static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
 {
 	int form_factor = ata_id_form_factor(args->id);
@@ -2374,6 +2412,13 @@
 		rbuf[13] = log_per_phys;
 		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
 		rbuf[15] = lowest_aligned;
+
+		if (ata_id_has_trim(args->id)) {
+			rbuf[14] |= 0x80; /* TPE */
+
+			if (ata_id_has_zero_after_trim(args->id))
+				rbuf[14] |= 0x40; /* TPRZ */
+		}
 	}
 
 	return 0;
@@ -2896,6 +2941,58 @@
 	return 1;
 }
 
+static unsigned int ata_scsi_write_same_xlat(struct ata_queued_cmd *qc)
+{
+	struct ata_taskfile *tf = &qc->tf;
+	struct scsi_cmnd *scmd = qc->scsicmd;
+	struct ata_device *dev = qc->dev;
+	const u8 *cdb = scmd->cmnd;
+	u64 block;
+	u32 n_block;
+	u32 size;
+	void *buf;
+
+	/* we may not issue DMA commands if no DMA mode is set */
+	if (unlikely(!dev->dma_mode))
+		goto invalid_fld;
+
+	if (unlikely(scmd->cmd_len < 16))
+		goto invalid_fld;
+	scsi_16_lba_len(cdb, &block, &n_block);
+
+	/* for now we only support WRITE SAME with the unmap bit set */
+	if (unlikely(!(cdb[1] & 0x8)))
+		goto invalid_fld;
+
+	/*
+	 * WRITE SAME always has a sector sized buffer as payload, this
+	 * should never be a multiple entry S/G list.
+	 */
+	if (!scsi_sg_count(scmd))
+		goto invalid_fld;
+
+	buf = page_address(sg_page(scsi_sglist(scmd)));
+	size = ata_set_lba_range_entries(buf, 512, block, n_block);
+
+	tf->protocol = ATA_PROT_DMA;
+	tf->hob_feature = 0;
+	tf->feature = ATA_DSM_TRIM;
+	tf->hob_nsect = (size / 512) >> 8;
+	tf->nsect = size / 512;
+	tf->command = ATA_CMD_DSM;
+	tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_LBA48 |
+		     ATA_TFLAG_WRITE;
+
+	ata_qc_set_pc_nbytes(qc);
+
+	return 0;
+
+ invalid_fld:
+	ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x00);
+	/* "Invalid field in cdb" */
+	return 1;
+}
+
 /**
  *	ata_get_xlat_func - check if SCSI to ATA translation is possible
  *	@dev: ATA device
@@ -2920,6 +3017,9 @@
 	case WRITE_16:
 		return ata_scsi_rw_xlat;
 
+	case 0x93 /*WRITE_SAME_16*/:
+		return ata_scsi_write_same_xlat;
+
 	case SYNCHRONIZE_CACHE:
 		if (ata_try_flush_cache(dev))
 			return ata_scsi_flush_xlat;
@@ -3109,6 +3209,9 @@
 		case 0x89:
 			ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89);
 			break;
+		case 0xb0:
+			ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b0);
+			break;
 		case 0xb1:
 			ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1);
 			break;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 1432dc9..9434114 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -453,7 +453,9 @@
 			/* Clear CD-ROM DMA write bit */
 			tmp &= 0x7F;
 		/* Cable and UDMA */
-		pci_write_config_byte(pdev, 0x4B, tmp | 0x09);
+		if (pdev->revision >= 0xc2)
+			tmp |= 0x01;
+		pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
 		/*
 		 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
 		 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index f98dffe..dadfc35 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -31,7 +31,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.3.1"
 
 /*
  * CMD64x specific registers definition.
@@ -254,17 +254,109 @@
 }
 
 /**
- *	cmd646r1_dma_stop	-	DMA stop callback
+ *	cmd64x_bmdma_stop	-	DMA stop callback
  *	@qc: Command in progress
  *
- *	Stub for now while investigating the r1 quirk in the old driver.
+ *	Track the completion of live DMA commands and clear the
+ *	host->private_data DMA tracking flag as we do.
  */
 
-static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
+static void cmd64x_bmdma_stop(struct ata_queued_cmd *qc)
 {
+	struct ata_port *ap = qc->ap;
 	ata_bmdma_stop(qc);
+	WARN_ON(ap->host->private_data != ap);
+	ap->host->private_data = NULL;
 }
 
+/**
+ *	cmd64x_qc_defer		-	Defer logic for chip limits
+ *	@qc: queued command
+ *
+ *	Decide whether we can issue the command. Called under the host lock.
+ */
+
+static int cmd64x_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_host *host = qc->ap->host;
+	struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+	int rc;
+	int dma = 0;
+
+	/* Apply the ATA rules first */
+	rc = ata_std_qc_defer(qc);
+	if (rc)
+		return rc;
+
+	if (qc->tf.protocol == ATAPI_PROT_DMA ||
+			qc->tf.protocol == ATA_PROT_DMA)
+		dma = 1;
+
+	/* If the other port is not live then issue the command */
+	if (alt == NULL || !alt->qc_active) {
+		if (dma)
+			host->private_data = qc->ap;
+		return 0;
+	}
+	/* If there is a live DMA command then wait */
+	if (host->private_data != NULL)
+		return 	ATA_DEFER_PORT;
+	if (dma)
+		/* Cannot overlap our DMA command */
+		return ATA_DEFER_PORT;
+	return 0;
+}
+
+/**
+ *	cmd64x_interrupt - ATA host interrupt handler
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host information structure
+ *
+ *	Our interrupt handler for PCI IDE devices.  Calls
+ *	ata_sff_host_intr() for each port that is flagging an IRQ. We cannot
+ *	use the defaults as we need to avoid touching status/altstatus during
+ *	a DMA.
+ *
+ *	LOCKING:
+ *	Obtains host lock during operation.
+ *
+ *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t cmd64x_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	unsigned int i;
+	unsigned int handled = 0;
+	unsigned long flags;
+	static const u8 irq_reg[2] = { CFR, ARTTIM23 };
+	static const u8 irq_mask[2] = { 1 << 2, 1 << 4 };
+
+	/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
+	spin_lock_irqsave(&host->lock, flags);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap;
+		u8 reg;
+
+		pci_read_config_byte(pdev, irq_reg[i], &reg);
+		ap = host->ports[i];
+		if (ap && (reg & irq_mask[i]) &&
+		    !(ap->flags & ATA_FLAG_DISABLED)) {
+			struct ata_queued_cmd *qc;
+
+			qc = ata_qc_from_tag(ap, ap->link.active_tag);
+			if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+			    (qc->flags & ATA_QCFLAG_ACTIVE))
+				handled |= ata_sff_host_intr(ap, qc);
+		}
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return IRQ_RETVAL(handled);
+}
 static struct scsi_host_template cmd64x_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -273,6 +365,8 @@
 	.inherits	= &ata_bmdma_port_ops,
 	.set_piomode	= cmd64x_set_piomode,
 	.set_dmamode	= cmd64x_set_dmamode,
+	.bmdma_stop	= cmd64x_bmdma_stop,
+	.qc_defer	= cmd64x_qc_defer,
 };
 
 static struct ata_port_operations cmd64x_port_ops = {
@@ -282,7 +376,6 @@
 
 static struct ata_port_operations cmd646r1_port_ops = {
 	.inherits	= &cmd64x_base_ops,
-	.bmdma_stop	= cmd646r1_bmdma_stop,
 	.cable_detect	= ata_cable_40wire,
 };
 
@@ -290,12 +383,11 @@
 	.inherits	= &cmd64x_base_ops,
 	.bmdma_stop	= cmd648_bmdma_stop,
 	.cable_detect	= cmd648_cable_detect,
+	.qc_defer	= ata_std_qc_defer
 };
 
 static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	u32 class_rev;
-
 	static const struct ata_port_info cmd_info[6] = {
 		{	/* CMD 643 - no UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
@@ -340,40 +432,43 @@
 	const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
 	u8 mrdmode;
 	int rc;
+	struct ata_host *host;
 
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
 
-	pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
-	class_rev &= 0xFF;
-
 	if (id->driver_data == 0)	/* 643 */
 		ata_pci_bmdma_clear_simplex(pdev);
 
 	if (pdev->device == PCI_DEVICE_ID_CMD_646) {
 		/* Does UDMA work ? */
-		if (class_rev > 4)
+		if (pdev->revision > 4)
 			ppi[0] = &cmd_info[2];
 		/* Early rev with other problems ? */
-		else if (class_rev == 1)
+		else if (pdev->revision == 1)
 			ppi[0] = &cmd_info[3];
 	}
 
+
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
 	pci_read_config_byte(pdev, MRDMODE, &mrdmode);
 	mrdmode &= ~ 0x30;	/* IRQ set up */
 	mrdmode |= 0x02;	/* Memory read line enable */
 	pci_write_config_byte(pdev, MRDMODE, mrdmode);
 
-	/* Force PIO 0 here.. */
-
 	/* PPC specific fixup copied from old driver */
 #ifdef CONFIG_PPC
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	if (rc)
+		return rc;
+	/* We use this pointer to track the AP which has DMA running */
+	host->private_data = NULL;
 
-	return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
+	pci_set_master(pdev);
+	return ata_pci_sff_activate_host(host, cmd64x_interrupt, &cmd64x_sht);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 0df83cf..95ebdac 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -90,48 +90,12 @@
 }
 
 /**
- *	cs5520_enable_dma	-	turn on DMA bits
- *
- *	Turn on the DMA bits for this disk. Needed because the BIOS probably
- *	has not done the work for us. Belongs in the core SATA code.
- */
-
-static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev)
-{
-	/* Set the DMA enable/disable flag */
-	u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02);
-	reg |= 1<<(adev->devno + 5);
-	iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02);
-}
-
-/**
- *	cs5520_set_dmamode	-	program DMA timings
- *	@ap: ATA port
- *	@adev: ATA device
- *
- *	Program the DMA mode timings for the controller according to the pio
- *	clocking table. Note that this device sets the DMA timings to PIO
- *	mode values. This may seem bizarre but the 5520 architecture talks
- *	PIO mode to the disk and DMA mode to the controller so the underlying
- *	transfers are PIO timed.
- */
-
-static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev)
-{
-	static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 };
-	cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]);
-	cs5520_enable_dma(ap, adev);
-}
-
-/**
  *	cs5520_set_piomode	-	program PIO timings
  *	@ap: ATA port
  *	@adev: ATA device
  *
  *	Program the PIO mode timings for the controller according to the pio
- *	clocking table. We know pio_mode will equal dma_mode because of the
- *	CS5520 architecture. At least once we turned DMA on and wrote a
- *	mode setter.
+ *	clocking table.
  */
 
 static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -149,7 +113,6 @@
 	.qc_prep		= ata_sff_dumb_qc_prep,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= cs5520_set_piomode,
-	.set_dmamode		= cs5520_set_dmamode,
 };
 
 static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 6da4cb4..ffee397 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -224,7 +224,7 @@
 };
 
 static struct ata_port_operations cs5536_port_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &ata_bmdma32_port_ops,
 	.cable_detect		= cs5536_cable_detect,
 	.set_piomode		= cs5536_set_piomode,
 	.set_dmamode		= cs5536_set_dmamode,
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 2a6412f..b2e71e6 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -2,6 +2,7 @@
  *    pata_efar.c - EFAR PIIX clone controller driver
  *
  *	(C) 2005 Red Hat
+ *	(C) 2009 Bartlomiej Zolnierkiewicz
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
@@ -118,12 +119,12 @@
 		int shift = 4 * ap->port_no;
 		u8 slave_data;
 
-		idetm_data &= 0xCC0F;
+		idetm_data &= 0xFF0F;
 		idetm_data |= (control << 4);
 
 		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
-		slave_data &= 0x0F << shift;
+		slave_data &= ap->port_no ? 0x0F : 0xF0;
 		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift;
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
@@ -200,7 +201,7 @@
 			master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
 			master_data |= control << 4;
 			pci_read_config_byte(dev, 0x44, &slave_data);
-			slave_data &= (0x0F + 0xE1 * ap->port_no);
+			slave_data &= ap->port_no ? 0x0F : 0xF0;
 			/* Load the matching timing */
 			slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
 			pci_write_config_byte(dev, 0x44, slave_data);
@@ -251,7 +252,7 @@
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
+		.mwdma_mask	= ATA_MWDMA12_ONLY,
 		.udma_mask 	= ATA_UDMA4,
 		.port_ops	= &efar_ops,
 	};
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index d7f2da1..0bd48e8 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.6.2"
+#define DRV_VERSION	"0.6.7"
 
 struct hpt_clock {
 	u8	xfer_mode;
@@ -36,24 +36,22 @@
 
 /* key for bus clock timings
  * bit
- * 0:3    data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
- *        DMA. cycles = value + 1
- * 4:8    data_low_time. active time of DIOW_/DIOR_ for PIO and MW
- *        DMA. cycles = value + 1
- * 9:12   cmd_high_time. inactive time of DIOW_/DIOR_ during task file
+ * 0:3    data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
+ *        cycles = value + 1
+ * 4:7    data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
+ *        cycles = value + 1
+ * 8:11   cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
  *        register access.
- * 13:17  cmd_low_time. active time of DIOW_/DIOR_ during task file
+ * 12:15  cmd_low_time. Active time of DIOW_/DIOR_ during task file
  *        register access.
- * 18:21  udma_cycle_time. clock freq and clock cycles for UDMA xfer.
- *        during task file register access.
- * 22:24  pre_high_time. time to initialize 1st cycle for PIO and MW DMA
- *        xfer.
- * 25:27  cmd_pre_high_time. time to initialize 1st PIO cycle for task
+ * 16:18  udma_cycle_time. Clock cycles for UDMA xfer?
+ * 19:21  pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer.
+ * 22:24  cmd_pre_high_time. Time to initialize 1st PIO cycle for task file
  *        register access.
- * 28     UDMA enable
- * 29     DMA enable
- * 30     PIO_MST enable. if set, the chip is in bus master mode during
- *        PIO.
+ * 28     UDMA enable.
+ * 29     DMA  enable.
+ * 30     PIO_MST enable. If set, the chip is in bus master mode during
+ *        PIO xfer.
  * 31     FIFO enable.
  */
 
@@ -344,7 +342,6 @@
 	const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
 
 	void *hpriv = NULL;
-	u32 class_rev;
 	u32 reg1;
 	int rc;
 
@@ -352,13 +349,10 @@
 	if (rc)
 		return rc;
 
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
-	class_rev &= 0xFF;
-
 	/* May be a later chip in disguise. Check */
 	/* Newer chips are not in the HPT36x driver. Ignore them */
-	if (class_rev > 2)
-			return -ENODEV;
+	if (dev->revision > 2)
+		return -ENODEV;
 
 	hpt36x_init_chipset(dev);
 
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index d0a7df2..4224cfc 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.12"
+#define DRV_VERSION	"0.6.14"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -303,72 +303,79 @@
 }
 
 /**
- *	hpt37x_pre_reset	-	reset the hpt37x bus
- *	@link: ATA link to reset
- *	@deadline: deadline jiffies for the operation
+ *	hpt37x_cable_detect	-	Detect the cable type
+ *	@ap: ATA port to detect on
  *
- *	Perform the initial reset handling for the 370/372 and 374 func 0
+ *	Return the cable type attached to this port
  */
 
-static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt37x_cable_detect(struct ata_port *ap)
 {
-	u8 scr2, ata66;
-	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	static const struct pci_bits hpt37x_enable_bits[] = {
-		{ 0x50, 1, 0x04, 0x04 },
-		{ 0x54, 1, 0x04, 0x04 }
-	};
-	if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
-		return -ENOENT;
+	u8 scr2, ata66;
 
 	pci_read_config_byte(pdev, 0x5B, &scr2);
 	pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
+
+	udelay(10); /* debounce */
+
 	/* Cable register now active */
 	pci_read_config_byte(pdev, 0x5A, &ata66);
 	/* Restore state */
 	pci_write_config_byte(pdev, 0x5B, scr2);
 
 	if (ata66 & (2 >> ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
+		return ATA_CBL_PATA40;
 	else
-		ap->cbl = ATA_CBL_PATA80;
-
-	/* Reset the state machine */
-	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
-	udelay(100);
-
-	return ata_sff_prereset(link, deadline);
+		return ATA_CBL_PATA80;
 }
 
-static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
+/**
+ *	hpt374_fn1_cable_detect	-	Detect the cable type
+ *	@ap: ATA port to detect on
+ *
+ *	Return the cable type attached to this port
+ */
+
+static int hpt374_fn1_cable_detect(struct ata_port *ap)
 {
-	static const struct pci_bits hpt37x_enable_bits[] = {
-		{ 0x50, 1, 0x04, 0x04 },
-		{ 0x54, 1, 0x04, 0x04 }
-	};
-	u16 mcr3;
-	u8 ata66;
-	struct ata_port *ap = link->ap;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	unsigned int mcrbase = 0x50 + 4 * ap->port_no;
-
-	if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
-		return -ENOENT;
+	u16 mcr3;
+	u8 ata66;
 
 	/* Do the extra channel work */
 	pci_read_config_word(pdev, mcrbase + 2, &mcr3);
-	/* Set bit 15 of 0x52 to enable TCBLID as input
-	 */
+	/* Set bit 15 of 0x52 to enable TCBLID as input */
 	pci_write_config_word(pdev, mcrbase + 2, mcr3 | 0x8000);
 	pci_read_config_byte(pdev, 0x5A, &ata66);
 	/* Reset TCBLID/FCBLID to output */
 	pci_write_config_word(pdev, mcrbase + 2, mcr3);
 
 	if (ata66 & (2 >> ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
+		return ATA_CBL_PATA40;
 	else
-		ap->cbl = ATA_CBL_PATA80;
+		return ATA_CBL_PATA80;
+}
+
+/**
+ *	hpt37x_pre_reset	-	reset the hpt37x bus
+ *	@link: ATA link to reset
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the initial reset handling for the HPT37x.
+ */
+
+static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	static const struct pci_bits hpt37x_enable_bits[] = {
+		{ 0x50, 1, 0x04, 0x04 },
+		{ 0x54, 1, 0x04, 0x04 }
+	};
+	if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
+		return -ENOENT;
 
 	/* Reset the state machine */
 	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
@@ -404,9 +411,8 @@
 
 	pci_read_config_dword(pdev, addr1, &reg);
 	mode = hpt37x_find_mode(ap, adev->pio_mode);
-	mode &= ~0x8000000;	/* No FIFO in PIO */
-	mode &= ~0x30070000;	/* Leave config bits alone */
-	reg &= 0x30070000;	/* Strip timing bits */
+	mode &= 0xCFC3FFFF;	/* Leave DMA bits alone */
+	reg &= ~0xCFC3FFFF;	/* Strip timing bits */
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -423,8 +429,7 @@
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 addr1, addr2;
-	u32 reg;
-	u32 mode;
+	u32 reg, mode, mask;
 	u8 fast;
 
 	addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -436,11 +441,12 @@
 	fast |= 0x01;
 	pci_write_config_byte(pdev, addr2, fast);
 
+	mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
 	pci_read_config_dword(pdev, addr1, &reg);
 	mode = hpt37x_find_mode(ap, adev->dma_mode);
-	mode |= 0x8000000;	/* FIFO in MWDMA or UDMA */
-	mode &= ~0xC0000000;	/* Leave config bits alone */
-	reg &= 0xC0000000;	/* Strip timing bits */
+	mode &= mask;
+	reg &= ~mask;
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -508,9 +514,8 @@
 	mode = hpt37x_find_mode(ap, adev->pio_mode);
 
 	printk("Find mode for %d reports %X\n", adev->pio_mode, mode);
-	mode &= ~0x80000000;	/* No FIFO in PIO */
-	mode &= ~0x30070000;	/* Leave config bits alone */
-	reg &= 0x30070000;	/* Strip timing bits */
+	mode &= 0xCFC3FFFF;	/* Leave DMA bits alone */
+	reg &= ~0xCFC3FFFF;	/* Strip timing bits */
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -527,8 +532,7 @@
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 addr1, addr2;
-	u32 reg;
-	u32 mode;
+	u32 reg, mode, mask;
 	u8 fast;
 
 	addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -539,12 +543,13 @@
 	fast &= ~0x07;
 	pci_write_config_byte(pdev, addr2, fast);
 
+	mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
 	pci_read_config_dword(pdev, addr1, &reg);
 	mode = hpt37x_find_mode(ap, adev->dma_mode);
 	printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode);
-	mode &= ~0xC0000000;	/* Leave config bits alone */
-	mode |= 0x80000000;	/* FIFO in MWDMA or UDMA */
-	reg &= 0xC0000000;	/* Strip timing bits */
+	mode &= mask;
+	reg &= ~mask;
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -584,6 +589,7 @@
 	.bmdma_stop	= hpt370_bmdma_stop,
 
 	.mode_filter	= hpt370_filter,
+	.cable_detect	= hpt37x_cable_detect,
 	.set_piomode	= hpt370_set_piomode,
 	.set_dmamode	= hpt370_set_dmamode,
 	.prereset	= hpt37x_pre_reset,
@@ -608,6 +614,7 @@
 
 	.bmdma_stop	= hpt37x_bmdma_stop,
 
+	.cable_detect	= hpt37x_cable_detect,
 	.set_piomode	= hpt372_set_piomode,
 	.set_dmamode	= hpt372_set_dmamode,
 	.prereset	= hpt37x_pre_reset,
@@ -620,7 +627,8 @@
 
 static struct ata_port_operations hpt374_fn1_port_ops = {
 	.inherits	= &hpt372_port_ops,
-	.prereset	= hpt374_fn1_pre_reset,
+	.cable_detect	= hpt374_fn1_cable_detect,
+	.prereset	= hpt37x_pre_reset,
 };
 
 /**
@@ -791,9 +799,8 @@
 	static const int MHz[4] = { 33, 40, 50, 66 };
 	void *private_data = NULL;
 	const struct ata_port_info *ppi[] = { NULL, NULL };
-
+	u8 rev = dev->revision;
 	u8 irqmask;
-	u32 class_rev;
 	u8 mcr1;
 	u32 freq;
 	int prefer_dpll = 1;
@@ -808,19 +815,16 @@
 	if (rc)
 		return rc;
 
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
-	class_rev &= 0xFF;
-
 	if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
 		/* May be a later chip in disguise. Check */
 		/* Older chips are in the HPT366 driver. Ignore them */
-		if (class_rev < 3)
+		if (rev < 3)
 			return -ENODEV;
 		/* N series chips have their own driver. Ignore */
-		if (class_rev == 6)
+		if (rev == 6)
 			return -ENODEV;
 
-		switch(class_rev) {
+		switch(rev) {
 			case 3:
 				ppi[0] = &info_hpt370;
 				chip_table = &hpt370;
@@ -836,28 +840,29 @@
 				chip_table = &hpt372;
 				break;
 			default:
-				printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype please report (%d).\n", class_rev);
+				printk(KERN_ERR "pata_hpt37x: Unknown HPT366 "
+				       "subtype, please report (%d).\n", rev);
 				return -ENODEV;
 		}
 	} else {
 		switch(dev->device) {
 			case PCI_DEVICE_ID_TTI_HPT372:
 				/* 372N if rev >= 2*/
-				if (class_rev >= 2)
+				if (rev >= 2)
 					return -ENODEV;
 				ppi[0] = &info_hpt372;
 				chip_table = &hpt372a;
 				break;
 			case PCI_DEVICE_ID_TTI_HPT302:
 				/* 302N if rev > 1 */
-				if (class_rev > 1)
+				if (rev > 1)
 					return -ENODEV;
 				ppi[0] = &info_hpt372;
 				/* Check this */
 				chip_table = &hpt302;
 				break;
 			case PCI_DEVICE_ID_TTI_HPT371:
-				if (class_rev > 1)
+				if (rev > 1)
 					return -ENODEV;
 				ppi[0] = &info_hpt372;
 				chip_table = &hpt371;
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 3d59fe0..9a09a1b 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.4"
+#define DRV_VERSION	"0.3.7"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -80,14 +80,13 @@
 
 	{	XFER_MW_DMA_2,	0x2c829c62	},
 	{	XFER_MW_DMA_1,	0x2c829c66	},
-	{	XFER_MW_DMA_0,	0x2c829d2c	},
+	{	XFER_MW_DMA_0,	0x2c829d2e	},
 
 	{	XFER_PIO_4,	0x0c829c62	},
 	{	XFER_PIO_3,	0x0c829c84	},
 	{	XFER_PIO_2,	0x0c829ca6	},
 	{	XFER_PIO_1,	0x0d029d26	},
 	{	XFER_PIO_0,	0x0d029d5e	},
-	{	0,		0x0d029d5e	}
 };
 
 /**
@@ -128,12 +127,15 @@
 
 	pci_read_config_byte(pdev, 0x5B, &scr2);
 	pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
+
+	udelay(10); /* debounce */
+
 	/* Cable register now active */
 	pci_read_config_byte(pdev, 0x5A, &ata66);
 	/* Restore state */
 	pci_write_config_byte(pdev, 0x5B, scr2);
 
-	if (ata66 & (1 << ap->port_no))
+	if (ata66 & (2 >> ap->port_no))
 		return ATA_CBL_PATA40;
 	else
 		return ATA_CBL_PATA80;
@@ -185,9 +187,8 @@
 
 	pci_read_config_dword(pdev, addr1, &reg);
 	mode = hpt3x2n_find_mode(ap, adev->pio_mode);
-	mode &= ~0x8000000;	/* No FIFO in PIO */
-	mode &= ~0x30070000;	/* Leave config bits alone */
-	reg &= 0x30070000;	/* Strip timing bits */
+	mode &= 0xCFC3FFFF;	/* Leave DMA bits alone */
+	reg &= ~0xCFC3FFFF;	/* Strip timing bits */
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -204,8 +205,7 @@
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 addr1, addr2;
-	u32 reg;
-	u32 mode;
+	u32 reg, mode, mask;
 	u8 fast;
 
 	addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
@@ -216,11 +216,12 @@
 	fast &= ~0x07;
 	pci_write_config_byte(pdev, addr2, fast);
 
+	mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000;
+
 	pci_read_config_dword(pdev, addr1, &reg);
 	mode = hpt3x2n_find_mode(ap, adev->dma_mode);
-	mode |= 0x8000000;	/* FIFO in MWDMA or UDMA */
-	mode &= ~0xC0000000;	/* Leave config bits alone */
-	reg &= 0xC0000000;	/* Strip timing bits */
+	mode &= mask;
+	reg &= ~mask;
 	pci_write_config_dword(pdev, addr1, reg | mode);
 }
 
@@ -447,10 +448,8 @@
 		.port_ops = &hpt3x2n_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
-
+	u8 rev = dev->revision;
 	u8 irqmask;
-	u32 class_rev;
-
 	unsigned int pci_mhz;
 	unsigned int f_low, f_high;
 	int adjust;
@@ -462,26 +461,23 @@
 	if (rc)
 		return rc;
 
-	pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
-	class_rev &= 0xFF;
-
 	switch(dev->device) {
 		case PCI_DEVICE_ID_TTI_HPT366:
-			if (class_rev < 6)
+			if (rev < 6)
 				return -ENODEV;
 			break;
 		case PCI_DEVICE_ID_TTI_HPT371:
-			if (class_rev < 2)
+			if (rev < 2)
 				return -ENODEV;
 			/* 371N if rev > 1 */
 			break;
 		case PCI_DEVICE_ID_TTI_HPT372:
 			/* 372N if rev >= 2*/
-			if (class_rev < 2)
+			if (rev < 2)
 				return -ENODEV;
 			break;
 		case PCI_DEVICE_ID_TTI_HPT302:
-			if (class_rev < 2)
+			if (rev < 2)
 				return -ENODEV;
 			break;
 		case PCI_DEVICE_ID_TTI_HPT372N:
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 7e31025..c86c716 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -255,8 +255,17 @@
 #ifdef CONFIG_PM
 static int hpt3x3_reinit_one(struct pci_dev *dev)
 {
+	struct ata_host *host = dev_get_drvdata(&dev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(dev);
+	if (rc)
+		return rc;
+
 	hpt3x3_init_chipset(dev);
-	return ata_pci_device_resume(dev);
+
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index f156da8..8f3325a 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -22,7 +22,7 @@
 #define DRV_VERSION	"0.0.3"
 
 /**
- *	it8213_pre_reset	-	check for 40/80 pin
+ *	it8213_pre_reset	-	probe begin
  *	@link: link
  *	@deadline: deadline jiffies for the operation
  *
@@ -92,18 +92,17 @@
 			    { 2, 1 },
 			    { 2, 3 }, };
 
-	if (pio > 2)
-		control |= 1;	/* TIME1 enable */
+	if (pio > 1)
+		control |= 1;	/* TIME */
 	if (ata_pio_need_iordy(adev))	/* PIO 3/4 require IORDY */
-		control |= 2;	/* IORDY enable */
+		control |= 2;	/* IE */
 	/* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */
 	if (adev->class != ATA_DEV_ATA)
-		control |= 4;
+		control |= 4;	/* PPE */
 
 	pci_read_config_word(dev, idetm_port, &idetm_data);
 
-	/* Enable PPE, IE and TIME as appropriate */
-
+	/* Set PPE, IE, and TIME as appropriate */
 	if (adev->devno == 0) {
 		idetm_data &= 0xCCF0;
 		idetm_data |= control;
@@ -112,17 +111,17 @@
 	} else {
 		u8 slave_data;
 
-		idetm_data &= 0xCC0F;
+		idetm_data &= 0xFF0F;
 		idetm_data |= (control << 4);
 
 		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);
 		slave_data &= 0xF0;
-		slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4;
+		slave_data |= (timings[pio][0] << 2) | timings[pio][1];
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
-	idetm_data |= 0x4000;	/* Ensure SITRE is enabled */
+	idetm_data |= 0x4000;	/* Ensure SITRE is set */
 	pci_write_config_word(dev, idetm_port, idetm_data);
 }
 
@@ -173,10 +172,10 @@
 
 		udma_enable |= (1 << devid);
 
-		/* Load the UDMA mode number */
+		/* Load the UDMA cycle time */
 		pci_read_config_word(dev, 0x4A, &udma_timing);
 		udma_timing &= ~(3 << (4 * devid));
-		udma_timing |= (udma & 3) << (4 * devid);
+		udma_timing |= u_speed << (4 * devid);
 		pci_write_config_word(dev, 0x4A, udma_timing);
 
 		/* Load the clock selection */
@@ -211,7 +210,7 @@
 			master_data &= 0xFF4F;  /* Mask out IORDY|TIME1|DMAONLY */
 			master_data |= control << 4;
 			pci_read_config_byte(dev, 0x44, &slave_data);
-			slave_data &= (0x0F + 0xE1 * ap->port_no);
+			slave_data &= 0xF0;
 			/* Load the matching timing */
 			slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
 			pci_write_config_byte(dev, 0x44, slave_data);
@@ -263,7 +262,7 @@
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
+		.mwdma_mask	= ATA_MWDMA12_ONLY,
 		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
 		.port_ops	= &it8213_ops,
 	};
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 188bc2f..edc5c1f 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -955,7 +955,7 @@
 static const struct pci_device_id it821x[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
-	{ PCI_VDEVICE(RDC, 0x1010), },
+	{ PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), },
 
 	{ },
 };
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 6932e56..9df1ff7 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -25,6 +25,13 @@
  *		http://www.ryston.cz/petr/vlb/pdc20230b.html
  *		http://www.ryston.cz/petr/vlb/pdc20230c.html
  *		http://www.ryston.cz/petr/vlb/pdc20630.html
+ *	QDI65x0:
+ *		http://www.ryston.cz/petr/vlb/qd6500.html
+ *		http://www.ryston.cz/petr/vlb/qd6580.html
+ *
+ *	QDI65x0 probe code based on drivers/ide/legacy/qd65xx.c
+ *	Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+ *	Samuel Thibault <samuel.thibault@ens-lyon.org>
  *
  *  Unsupported but docs exist:
  *	Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
@@ -35,7 +42,7 @@
  *  the MPIIX where the tuning is PCI side but the IDE is "ISA side".
  *
  *  Specific support is included for the ht6560a/ht6560b/opti82c611a/
- *  opti82c465mv/promise 20230c/20630/winbond83759A
+ *  opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A
  *
  *  Use the autospeed and pio_mask options with:
  *	Appian ADI/2 aka CLPD7220 or AIC25VL01.
@@ -672,7 +679,7 @@
 	outb(timing, ld_qdi->timing + 2 * ap->port_no);
 	/* Clear the FIFO */
 	if (adev->class != ATA_DEV_ATA)
-		outb(0x5F, ld_qdi->timing + 3);
+		outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
 }
 
 /**
@@ -707,7 +714,7 @@
 	outb(timing, ld_qdi->timing + 2 * adev->devno);
 	/* Clear the FIFO */
 	if (adev->class != ATA_DEV_ATA)
-		outb(0x5F, ld_qdi->timing + 3);
+		outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
 }
 
 /**
@@ -787,6 +794,7 @@
 static struct ata_port_operations qdi6580dp_port_ops = {
 	.inherits	= &legacy_base_port_ops,
 	.set_piomode	= qdi6580dp_set_piomode,
+	.qc_issue	= qdi_qc_issue,
 	.sff_data_xfer	= vlb32_data_xfer,
 };
 
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 2096fb7..950da39 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -58,7 +58,7 @@
 }
 
 /**
- *	marvell_pre_reset	-	check for 40/80 pin
+ *	marvell_pre_reset	-	probe begin
  *	@link: link
  *	@deadline: deadline jiffies for the operation
  *
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 773b159..061aa1c 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -325,6 +325,13 @@
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
+static void ns87415_fixup(struct pci_dev *pdev)
+{
+	/* Select 512 byte sectors */
+	pci_write_config_byte(pdev, 0x55, 0xEE);
+	/* Select PIO0 8bit clocking */
+	pci_write_config_byte(pdev, 0x54, 0xB7);
+}
 
 /**
  *	ns87415_init_one - Register 87415 ATA PCI device with kernel services
@@ -371,10 +378,8 @@
 	if (rc)
 		return rc;
 
-	/* Select 512 byte sectors */
-	pci_write_config_byte(pdev, 0x55, 0xEE);
-	/* Select PIO0 8bit clocking */
-	pci_write_config_byte(pdev, 0x54, 0xB7);
+	ns87415_fixup(pdev);
+
 	return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
 }
 
@@ -384,6 +389,23 @@
 	{ }	/* terminate list */
 };
 
+#ifdef CONFIG_PM
+static int ns87415_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	ns87415_fixup(pdev);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static struct pci_driver ns87415_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= ns87415_pci_tbl,
@@ -391,7 +413,7 @@
 	.remove			= ata_pci_remove_one,
 #ifdef CONFIG_PM
 	.suspend		= ata_pci_device_suspend,
-	.resume			= ata_pci_device_resume,
+	.resume			= ns87415_reinit_one,
 #endif
 };
 
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 84ac503..9a8687d 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -239,7 +239,7 @@
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
+		.mwdma_mask	= ATA_MWDMA12_ONLY,
 		.port_ops	= &oldpiix_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index dc99e26..1b392c9 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -177,9 +177,6 @@
 	.drain_fifo	= pcmcia_8bit_drain_fifo,
 };
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 
 struct pcmcia_config_check {
 	unsigned long ctl_base;
@@ -252,7 +249,7 @@
 	struct ata_port *ap;
 	struct ata_pcmcia_info *info;
 	struct pcmcia_config_check *stk = NULL;
-	int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+	int is_kme = 0, ret = -ENOMEM, p;
 	unsigned long io_base, ctl_base;
 	void __iomem *io_addr, *ctl_addr;
 	int n_ports = 1;
@@ -271,7 +268,6 @@
 	pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
 	pdev->io.IOAddrLines = 3;
 	pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	pdev->conf.Attributes = CONF_ENABLE_IRQ;
 	pdev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -296,8 +292,13 @@
 	}
 	io_base = pdev->io.BasePort1;
 	ctl_base = stk->ctl_base;
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
+	ret = pcmcia_request_irq(pdev, &pdev->irq);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_request_configuration(pdev, &pdev->conf);
+	if (ret)
+		goto failed;
 
 	/* iomap */
 	ret = -ENOMEM;
@@ -351,8 +352,6 @@
 	kfree(stk);
 	return 0;
 
-cs_failed:
-	cs_error(pdev, last_fn, last_ret);
 failed:
 	kfree(stk);
 	info->ndev = 0;
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
new file mode 100644
index 0000000..bfe0180
--- /dev/null
+++ b/drivers/ata/pata_piccolo.c
@@ -0,0 +1,140 @@
+/*
+ *  pata_piccolo.c - Toshiba Piccolo PATA/SATA controller driver.
+ *
+ *  This is basically an update to ata_generic.c to add Toshiba Piccolo support
+ *  then split out to keep ata_generic "clean".
+ *
+ *  Copyright 2005 Red Hat Inc, all rights reserved.
+ *
+ *  Elements from ide/pci/generic.c
+ *	    Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
+ *	    Portions (C) Copyright 2002  Red Hat Inc <alan@redhat.com>
+ *
+ *  May be copied or modified under the terms of the GNU General Public License
+ *
+ *  The timing data tables/programming info are courtesy of the NetBSD driver
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_piccolo"
+#define DRV_VERSION "0.0.1"
+
+
+
+static void tosh_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	static const u16 pio[6] = {	/* For reg 0x50 low word & E088 */
+		0x0566, 0x0433, 0x0311, 0x0201, 0x0200, 0x0100
+	};
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u16 conf;
+	pci_read_config_word(pdev, 0x50, &conf);
+	conf &= 0xE088;
+	conf |= pio[adev->pio_mode - XFER_PIO_0];
+	pci_write_config_word(pdev, 0x50, conf);
+}
+
+static void tosh_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u32 conf;
+	pci_read_config_dword(pdev, 0x5C, &conf);
+	conf &= 0x78FFE088;	/* Keep the other bits */
+	if (adev->dma_mode >= XFER_UDMA_0) {
+		int udma = adev->dma_mode - XFER_UDMA_0;
+		conf |= 0x80000000;
+		conf |= (udma + 2) << 28;
+		conf |= (2 - udma) * 0x111;	/* spread into three nibbles */
+	} else {
+		static const u32 mwdma[4] = {
+			0x0655, 0x0200, 0x0200, 0x0100
+		};
+		conf |= mwdma[adev->dma_mode - XFER_MW_DMA_0];
+	}
+	pci_write_config_dword(pdev, 0x5C, conf);
+}
+
+
+static struct scsi_host_template tosh_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations tosh_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.cable_detect	= ata_cable_unknown,
+	.set_piomode	= tosh_set_piomode,
+	.set_dmamode	= tosh_set_dmamode
+};
+
+/**
+ *	ata_tosh_init		-	attach generic IDE
+ *	@dev: PCI device found
+ *	@id: match entry
+ *
+ *	Called each time a matching IDE interface is found. We check if the
+ *	interface is one we wish to claim and if so we perform any chip
+ *	specific hacks then let the ATA layer do the heavy lifting.
+ */
+
+static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	static const struct ata_port_info info = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = ATA_PIO5,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
+		.port_ops = &tosh_port_ops
+	};
+	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+	/* Just one port for the moment */
+	return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL);
+}
+
+static struct pci_device_id ata_tosh[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),  },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_3),  },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_5),  },
+	{ 0, },
+};
+
+static struct pci_driver ata_tosh_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= ata_tosh,
+	.probe 		= ata_tosh_init_one,
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
+#endif
+};
+
+static int __init ata_tosh_init(void)
+{
+	return pci_register_driver(&ata_tosh_pci_driver);
+}
+
+
+static void __exit ata_tosh_exit(void)
+{
+	pci_unregister_driver(&ata_tosh_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("Low level driver for Toshiba Piccolo ATA");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, ata_tosh);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(ata_tosh_init);
+module_exit(ata_tosh_exit);
+
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 4401b33..4fd25e7 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -139,9 +139,9 @@
 		pci_read_config_byte(dev, 0x4A, &udma_mode);
 
 		if (adev->xfer_mode == XFER_UDMA_2)
-			udma_mode &= ~ (1 << adev->devno);
+			udma_mode &= ~(2 << (adev->devno * 4));
 		else /* UDMA 4 */
-			udma_mode |= (1 << adev->devno);
+			udma_mode |= (2 << (adev->devno * 4));
 
 		pci_write_config_byte(dev, 0x4A, udma_mode);
 
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index c843a1e..237a24d 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -284,7 +284,7 @@
 
 	.flags		= ATA_FLAG_SLAVE_POSS,
 	.pio_mask	= ATA_PIO4,
-	.mwdma_mask	= ATA_MWDMA2,
+	.mwdma_mask	= ATA_MWDMA12_ONLY,
 	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &rdc_pata_ops,
 };
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index a5e4dfe..2932998 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -105,11 +105,20 @@
 #ifdef CONFIG_PM
 static int rz1000_reinit_one(struct pci_dev *pdev)
 {
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
 	/* If this fails on resume (which is a "cant happen" case), we
 	   must stop as any progress risks data loss */
 	if (rz1000_fifo_disable(pdev))
 		panic("rz1000 fifo");
-	return ata_pci_device_resume(pdev);
+
+	ata_host_resume(host);
+	return 0;
 }
 #endif
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 4cb649d..a2ace48 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -212,13 +212,11 @@
 
 static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
 {
-	u32 class_rev	= 0;
 	u8 tmpbyte	= 0;
 
-        pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
-        class_rev &= 0xff;
         /* FIXME: double check */
-	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, (class_rev) ? 1 : 255);
+	pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
+			      pdev->revision ? 1 : 255);
 
 	pci_write_config_byte(pdev, 0x80, 0x00);
 	pci_write_config_byte(pdev, 0x84, 0x00);
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 488e77b..5c30d56 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -2,7 +2,7 @@
  *    pata_sis.c - SiS ATA driver
  *
  *	(C) 2005 Red Hat
- *	(C) 2007 Bartlomiej Zolnierkiewicz
+ *	(C) 2007,2009 Bartlomiej Zolnierkiewicz
  *
  *    Based upon linux/drivers/ide/pci/sis5513.c
  * Copyright (C) 1999-2000	Andre Hedrick <andre@linux-ide.org>
@@ -829,6 +829,23 @@
 	return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
 }
 
+#ifdef CONFIG_PM
+static int sis_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	sis_fixup(pdev, host->private_data);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static const struct pci_device_id sis_pci_tbl[] = {
 	{ PCI_VDEVICE(SI, 0x5513), },	/* SiS 5513 */
 	{ PCI_VDEVICE(SI, 0x5518), },	/* SiS 5518 */
@@ -844,7 +861,7 @@
 	.remove			= ata_pci_remove_one,
 #ifdef CONFIG_PM
 	.suspend		= ata_pci_device_suspend,
-	.resume			= ata_pci_device_resume,
+	.resume			= sis_reinit_one,
 #endif
 };
 
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 88984b8..0d97890 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -303,14 +303,21 @@
 	}
 
 	/* Set UDMA unless device is not UDMA capable */
-	if (udma_type && t.udma) {
-		u8 cable80_status;
+	if (udma_type) {
+		u8 udma_etc;
 
-		/* Get 80-wire cable detection bit */
-		pci_read_config_byte(pdev, 0x50 + offset, &cable80_status);
-		cable80_status &= 0x10;
+		pci_read_config_byte(pdev, 0x50 + offset, &udma_etc);
 
-		pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status);
+		/* clear transfer mode bit */
+		udma_etc &= ~0x20;
+
+		if (t.udma) {
+			/* preserve 80-wire cable detection bit */
+			udma_etc &= 0x10;
+			udma_etc |= ut;
+		}
+
+		pci_write_config_byte(pdev, 0x50 + offset, udma_etc);
 	}
 }
 
@@ -337,6 +344,32 @@
 }
 
 /**
+ *	via_mode_filter		-	filter buggy device/mode pairs
+ *	@dev: ATA device
+ *	@mask: Mode bitmask
+ *
+ *	We need to apply some minimal filtering for old controllers and at least
+ *	one breed of Transcend SSD. Return the updated mask.
+ */
+
+static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask)
+{
+	struct ata_host *host = dev->link->ap->host;
+	const struct via_isa_bridge *config = host->private_data;
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+
+	if (config->id == PCI_DEVICE_ID_VIA_82C586_0) {
+		ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
+		if (strcmp(model_num, "TS64GSSD25-M") == 0) {
+			ata_dev_printk(dev, KERN_WARNING,
+	"disabling UDMA mode due to reported lockups with this device.\n");
+			mask &= ~ ATA_MASK_UDMA;
+		}
+	}
+	return ata_bmdma_mode_filter(dev, mask);
+}
+
+/**
  *	via_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
@@ -427,6 +460,7 @@
 	.prereset	= via_pre_reset,
 	.sff_tf_load	= via_tf_load,
 	.port_start	= via_port_start,
+	.mode_filter	= via_mode_filter,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
@@ -526,7 +560,7 @@
 		.port_ops = &via_port_ops
 	};
 	const struct ata_port_info *ppi[] = { NULL, NULL };
-	struct pci_dev *isa = NULL;
+	struct pci_dev *isa;
 	const struct via_isa_bridge *config;
 	static int printed_version;
 	u8 enable;
@@ -551,14 +585,12 @@
 		if ((isa = pci_get_device(PCI_VENDOR_ID_VIA +
 			!!(config->flags & VIA_BAD_ID),
 			config->id, NULL))) {
-
-			if (isa->revision >= config->rev_min &&
-			    isa->revision <= config->rev_max)
-				break;
+			u8 rev = isa->revision;
 			pci_dev_put(isa);
-		}
 
-	pci_dev_put(isa);
+			if (rev >= config->rev_min && rev <= config->rev_max)
+				break;
+		}
 
 	if (!(config->flags & VIA_NO_ENABLES)) {
 		/* 0x40 low bits indicate enabled channels */
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index d344db4..8a5d35b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,7 @@
 
 	SATA_FSL_HOST_FLAGS	= (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-				ATA_FLAG_PMP | ATA_FLAG_NCQ),
+				ATA_FLAG_PMP | ATA_FLAG_NCQ | ATA_FLAG_AN),
 
 	SATA_FSL_MAX_CMDS	= SATA_FSL_QUEUE_DEPTH,
 	SATA_FSL_CMD_HDR_SIZE	= 16,	/* 4 DWORDS */
@@ -132,7 +132,7 @@
 	INT_ON_SINGL_DEVICE_ERR = (1 << 1),
 	INT_ON_CMD_COMPLETE = 1,
 
-	INT_ON_ERROR = INT_ON_FATAL_ERR |
+	INT_ON_ERROR = INT_ON_FATAL_ERR | INT_ON_SNOTIFY_UPDATE |
 	    INT_ON_PHYRDY_CHG | INT_ON_SINGL_DEVICE_ERR,
 
 	/*
@@ -153,7 +153,7 @@
 	IE_ON_CMD_COMPLETE = 1,
 
 	DEFAULT_PORT_IRQ_ENABLE_MASK = IE_ON_FATAL_ERR | IE_ON_PHYRDY_CHG |
-	    IE_ON_SIGNATURE_UPDATE |
+	    IE_ON_SIGNATURE_UPDATE | IE_ON_SNOTIFY_UPDATE |
 	    IE_ON_SINGL_DEVICE_ERR | IE_ON_CMD_COMPLETE,
 
 	EXT_INDIRECT_SEG_PRD_FLAG = (1 << 31),
@@ -707,34 +707,17 @@
 	return ata_dev_classify(&tf);
 }
 
-static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline)
-{
-	/* FIXME: Never skip softreset, sata_fsl_softreset() is
-	 * combination of soft and hard resets.  sata_fsl_softreset()
-	 * needs to be splitted into soft and hard resets.
-	 */
-	return 0;
-}
-
-static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
+static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class,
 					unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
-	struct sata_fsl_port_priv *pp = ap->private_data;
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
-	int pmp = sata_srst_pmp(link);
 	u32 temp;
-	struct ata_taskfile tf;
-	u8 *cfis;
-	u32 Serror;
 	int i = 0;
 	unsigned long start_jiffies;
 
-	DPRINTK("in xx_softreset\n");
-
-	if (pmp != SATA_PMP_CTRL_PORT)
-		goto issue_srst;
+	DPRINTK("in xx_hardreset\n");
 
 try_offline_again:
 	/*
@@ -749,7 +732,7 @@
 
 	if (temp & ONLINE) {
 		ata_port_printk(ap, KERN_ERR,
-				"Softreset failed, not off-lined %d\n", i);
+				"Hardreset failed, not off-lined %d\n", i);
 
 		/*
 		 * Try to offline controller atleast twice
@@ -761,7 +744,7 @@
 			goto try_offline_again;
 	}
 
-	DPRINTK("softreset, controller off-lined\n");
+	DPRINTK("hardreset, controller off-lined\n");
 	VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
 	VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
 
@@ -786,11 +769,11 @@
 
 	if (!(temp & ONLINE)) {
 		ata_port_printk(ap, KERN_ERR,
-				"Softreset failed, not on-lined\n");
+				"Hardreset failed, not on-lined\n");
 		goto err;
 	}
 
-	DPRINTK("softreset, controller off-lined & on-lined\n");
+	DPRINTK("hardreset, controller off-lined & on-lined\n");
 	VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS));
 	VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL));
 
@@ -806,7 +789,7 @@
 				"No Device OR PHYRDY change,Hstatus = 0x%x\n",
 				ioread32(hcr_base + HSTATUS));
 		*class = ATA_DEV_NONE;
-		goto out;
+		return 0;
 	}
 
 	/*
@@ -819,11 +802,44 @@
 	if ((temp & 0xFF) != 0x18) {
 		ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
 		*class = ATA_DEV_NONE;
-		goto out;
+		goto do_followup_srst;
 	} else {
 		ata_port_printk(ap, KERN_INFO,
 				"Signature Update detected @ %d msecs\n",
 				jiffies_to_msecs(jiffies - start_jiffies));
+		*class = sata_fsl_dev_classify(ap);
+		return 0;
+	}
+
+do_followup_srst:
+	/*
+	 * request libATA to perform follow-up softreset
+	 */
+	return -EAGAIN;
+
+err:
+	return -EIO;
+}
+
+static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
+					unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct sata_fsl_port_priv *pp = ap->private_data;
+	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	int pmp = sata_srst_pmp(link);
+	u32 temp;
+	struct ata_taskfile tf;
+	u8 *cfis;
+	u32 Serror;
+
+	DPRINTK("in xx_softreset\n");
+
+	if (ata_link_offline(link)) {
+		DPRINTK("PHY reports no device\n");
+		*class = ATA_DEV_NONE;
+		return 0;
 	}
 
 	/*
@@ -834,7 +850,6 @@
 	 * reached here, we can send a command to the target device
 	 */
 
-issue_srst:
 	DPRINTK("Sending SRST/device reset\n");
 
 	ata_tf_init(link->device, &tf);
@@ -860,6 +875,8 @@
 		ioread32(CA + hcr_base), ioread32(CC + hcr_base));
 
 	iowrite32(0xFFFF, CC + hcr_base);
+	if (pmp != SATA_PMP_CTRL_PORT)
+		iowrite32(pmp, CQPMP + hcr_base);
 	iowrite32(1, CQ + hcr_base);
 
 	temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000);
@@ -926,7 +943,6 @@
 		VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
 	}
 
-out:
 	return 0;
 
 err:
@@ -976,9 +992,8 @@
 	 */
 
 	sata_fsl_scr_read(&ap->link, SCR_ERROR, &SError);
-	if (unlikely(SError & 0xFFFF0000)) {
+	if (unlikely(SError & 0xFFFF0000))
 		sata_fsl_scr_write(&ap->link, SCR_ERROR, SError);
-	}
 
 	DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
 		hstatus, cereg, ioread32(hcr_base + DE), SError);
@@ -988,21 +1003,13 @@
 		ehi->err_mask |= AC_ERR_ATA_BUS;
 		ehi->action |= ATA_EH_SOFTRESET;
 
-		/*
-		 * Ignore serror in case of fatal errors as we always want
-		 * to do a soft-reset of the FSL SATA controller. Analyzing
-		 * serror may cause libata to schedule a hard-reset action,
-		 * and hard-reset currently does not do controller
-		 * offline/online, causing command timeouts and leads to an
-		 * un-recoverable state, hence make libATA ignore
-		 * autopsy in case of fatal errors.
-		 */
-
-		ehi->flags |= ATA_EHI_NO_AUTOPSY;
-
 		freeze = 1;
 	}
 
+	/* Handle SDB FIS receive & notify update */
+	if (hstatus & INT_ON_SNOTIFY_UPDATE)
+		sata_async_notification(ap);
+
 	/* Handle PHYRDY change notification */
 	if (hstatus & INT_ON_PHYRDY_CHG) {
 		DPRINTK("SATA FSL: PHYRDY change indication\n");
@@ -1066,9 +1073,9 @@
 	}
 
 	/* record error info */
-	if (qc) {
+	if (qc)
 		qc->err_mask |= err_mask;
-	} else
+	else
 		ehi->err_mask |= err_mask;
 
 	ehi->action |= action;
@@ -1099,7 +1106,6 @@
 	if (unlikely(SError & 0xFFFF0000)) {
 		DPRINTK("serror @host_intr : 0x%x\n", SError);
 		sata_fsl_error_intr(ap);
-
 	}
 
 	if (unlikely(hstatus & INT_ON_ERROR)) {
@@ -1267,8 +1273,8 @@
 
 	.freeze = sata_fsl_freeze,
 	.thaw = sata_fsl_thaw,
-	.prereset = sata_fsl_prereset,
 	.softreset = sata_fsl_softreset,
+	.hardreset = sata_fsl_hardreset,
 	.pmp_softreset = sata_fsl_softreset,
 	.error_handler = sata_fsl_error_handler,
 	.post_internal_cmd = sata_fsl_post_internal_cmd,
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 6f5093b..a8a7be0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2217,7 +2217,7 @@
 	int err = 0;
 
 	ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis);
-	err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0]));
+	err = mv_send_fis(ap, fis, ARRAY_SIZE(fis));
 	if (err)
 		return err;
 
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e6946fc..1370df6 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -417,6 +417,10 @@
 #endif
 };
 
+static int sata_sil24_msi;    /* Disable MSI */
+module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
+MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
+
 /*
  * Use bits 30-31 of port_flags to encode available port numbers.
  * Current maxium is 4.
@@ -1340,6 +1344,11 @@
 
 	sil24_init_controller(host);
 
+	if (sata_sil24_msi && !pci_enable_msi(pdev)) {
+		dev_printk(KERN_INFO, &pdev->dev, "Using MSI\n");
+		pci_intx(pdev, 0);
+	}
+
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
 				 &sil24_sht);
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 66e1813..8af2341 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -2351,6 +2351,7 @@
 MODULE_AUTHOR(maintainer_string);
 MODULE_DESCRIPTION(description_string);
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("atmsar11.fw");
 module_param(debug,   ushort, 0644);
 module_param(cmds,    uint, 0);
 module_param(txs,     uint, 0);
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index f766cc4..bc53fed 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2906,8 +2906,8 @@
 	u32 media_index    = FORE200E_MEDIA_INDEX(fore200e->bus->read(&fore200e->cp_queues->media_type));
 	u32 oc3_index;
 
-	if ((media_index < 0) || (media_index > 4))
-	    media_index = 5;
+	if (media_index > 4)
+		media_index = 5;
 	
 	switch (fore200e->loop_mode) {
 	    case ATM_LM_NONE:    oc3_index = 0;
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 7066703..e906658 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -2739,7 +2739,7 @@
 			spin_lock_irqsave(&he_dev->global_lock, flags);
 			switch (reg.type) {
 				case HE_REGTYPE_PCI:
-					if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) {
+					if (reg.addr >= HE_REGMAP_SIZE) {
 						err = -EINVAL;
 						break;
 					}
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index c5f5186..51eed67 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -142,6 +142,9 @@
 MODULE_DESCRIPTION("Solos PCI driver");
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("solos-FPGA.bin");
+MODULE_FIRMWARE("solos-Firmware.bin");
+MODULE_FIRMWARE("solos-db-FPGA.bin");
 MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
 MODULE_PARM_DESC(atmdebug, "Print ATM data");
 MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
@@ -528,34 +531,37 @@
 	int numblocks = 0;
 	int offset;
 
-	if (chip == 0) {
+	switch (chip) {
+	case 0:
 		fw_name = "solos-FPGA.bin";
 		blocksize = FPGA_BLOCK;
-	} 
-	
-	if (chip == 1) {
+		break;
+	case 1:
 		fw_name = "solos-Firmware.bin";
 		blocksize = SOLOS_BLOCK;
-	}
-	
-	if (chip == 2){
+		break;
+	case 2:
 		if (card->fpga_version > LEGACY_BUFFERS){
 			fw_name = "solos-db-FPGA.bin";
 			blocksize = FPGA_BLOCK;
 		} else {
-			dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+			dev_info(&card->dev->dev, "FPGA version doesn't support"
+					" daughter board upgrades\n");
 			return -EPERM;
 		}
-	}
-	
-	if (chip == 3){
+		break;
+	case 3:
 		if (card->fpga_version > LEGACY_BUFFERS){
 			fw_name = "solos-Firmware.bin";
 			blocksize = SOLOS_BLOCK;
 		} else {
-		dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
-		return -EPERM;
+			dev_info(&card->dev->dev, "FPGA version doesn't support"
+					" daughter board upgrades\n");
+			return -EPERM;
 		}
+		break;
+	default:
+		return -ENODEV;
 	}
 
 	if (request_firmware(&fw, fw_name, &card->dev->dev))
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index a770498..5a01ece 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -185,6 +185,7 @@
 	}
 
 	dev->power.runtime_status = RPM_SUSPENDING;
+	dev->power.deferred_resume = false;
 
 	if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend) {
 		spin_unlock_irq(&dev->power.lock);
@@ -200,7 +201,6 @@
 	if (retval) {
 		dev->power.runtime_status = RPM_ACTIVE;
 		pm_runtime_cancel_pending(dev);
-		dev->power.deferred_resume = false;
 
 		if (retval == -EAGAIN || retval == -EBUSY) {
 			notify = true;
@@ -217,7 +217,6 @@
 	wake_up_all(&dev->power.wait_queue);
 
 	if (dev->power.deferred_resume) {
-		dev->power.deferred_resume = false;
 		__pm_runtime_resume(dev, false);
 		retval = -EAGAIN;
 		goto out;
@@ -328,11 +327,11 @@
 		 * necessary.
 		 */
 		parent = dev->parent;
-		spin_unlock_irq(&dev->power.lock);
+		spin_unlock(&dev->power.lock);
 
 		pm_runtime_get_noresume(parent);
 
-		spin_lock_irq(&parent->power.lock);
+		spin_lock(&parent->power.lock);
 		/*
 		 * We can resume if the parent's run-time PM is disabled or it
 		 * is set to ignore children.
@@ -343,9 +342,9 @@
 			if (parent->power.runtime_status != RPM_ACTIVE)
 				retval = -EBUSY;
 		}
-		spin_unlock_irq(&parent->power.lock);
+		spin_unlock(&parent->power.lock);
 
-		spin_lock_irq(&dev->power.lock);
+		spin_lock(&dev->power.lock);
 		if (retval)
 			goto out;
 		goto repeat;
@@ -626,6 +625,8 @@
 		goto out;
 
 	dev->power.timer_expires = jiffies + msecs_to_jiffies(delay);
+	if (!dev->power.timer_expires)
+		dev->power.timer_expires = 1;
 	mod_timer(&dev->power.suspend_timer, dev->power.timer_expires);
 
  out:
@@ -659,13 +660,17 @@
 
 	pm_runtime_deactivate_timer(dev);
 
+	if (dev->power.runtime_status == RPM_SUSPENDING) {
+		dev->power.deferred_resume = true;
+		return retval;
+	}
 	if (dev->power.request_pending) {
 		/* If non-resume request is pending, we can overtake it. */
 		dev->power.request = retval ? RPM_REQ_NONE : RPM_REQ_RESUME;
 		return retval;
-	} else if (retval) {
-		return retval;
 	}
+	if (retval)
+		return retval;
 
 	dev->power.request = RPM_REQ_RESUME;
 	dev->power.request_pending = true;
@@ -777,7 +782,7 @@
 	}
 
 	if (parent) {
-		spin_lock_irq(&parent->power.lock);
+		spin_lock_nested(&parent->power.lock, SINGLE_DEPTH_NESTING);
 
 		/*
 		 * It is invalid to put an active child under a parent that is
@@ -786,14 +791,12 @@
 		 */
 		if (!parent->power.disable_depth
 		    && !parent->power.ignore_children
-		    && parent->power.runtime_status != RPM_ACTIVE) {
+		    && parent->power.runtime_status != RPM_ACTIVE)
 			error = -EBUSY;
-		} else {
-			if (dev->power.runtime_status == RPM_SUSPENDED)
-				atomic_inc(&parent->power.child_count);
-		}
+		else if (dev->power.runtime_status == RPM_SUSPENDED)
+			atomic_inc(&parent->power.child_count);
 
-		spin_unlock_irq(&parent->power.lock);
+		spin_unlock(&parent->power.lock);
 
 		if (error)
 			goto out;
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 1d886e0..77bfce5 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -271,6 +271,8 @@
 	  instead, which can be configured to be on-disk compatible with the
 	  cryptoloop device.
 
+source "drivers/block/drbd/Kconfig"
+
 config BLK_DEV_NBD
 	tristate "Network block device support"
 	depends on NET
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index cdaa3f8..aff5ac9 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -36,5 +36,6 @@
 obj-$(CONFIG_BLK_DEV_HD)	+= hd.o
 
 obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o
+obj-$(CONFIG_BLK_DEV_DRBD)     += drbd/
 
 swim_mod-objs	:= swim.o swim_asm.o
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 965ece2..13bb69d 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -735,6 +735,21 @@
 	part_stat_unlock();
 }
 
+/*
+ * Ensure we don't create aliases in VI caches
+ */
+static inline void
+killalias(struct bio *bio)
+{
+	struct bio_vec *bv;
+	int i;
+
+	if (bio_data_dir(bio) == READ)
+		__bio_for_each_segment(bv, bio, i, 0) {
+			flush_dcache_page(bv->bv_page);
+		}
+}
+
 void
 aoecmd_ata_rsp(struct sk_buff *skb)
 {
@@ -853,8 +868,12 @@
 
 	if (buf && --buf->nframesout == 0 && buf->resid == 0) {
 		diskstats(d->gd, buf->bio, jiffies - buf->stime, buf->sector);
-		n = (buf->flags & BUFFL_FAIL) ? -EIO : 0;
-		bio_endio(buf->bio, n);
+		if (buf->flags & BUFFL_FAIL)
+			bio_endio(buf->bio, -EIO);
+		else {
+			killalias(buf->bio);
+			bio_endio(buf->bio, 0);
+		}
 		mempool_free(buf, d->bufpool);
 	}
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 6399e50..873e594 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -179,19 +179,17 @@
 static int deregister_disk(ctlr_info_t *h, int drv_index,
 			   int clear_all, int via_ioctl);
 
-static void cciss_read_capacity(int ctlr, int logvol, int withirq,
+static void cciss_read_capacity(int ctlr, int logvol,
 			sector_t *total_size, unsigned int *block_size);
-static void cciss_read_capacity_16(int ctlr, int logvol, int withirq,
+static void cciss_read_capacity_16(int ctlr, int logvol,
 			sector_t *total_size, unsigned int *block_size);
 static void cciss_geometry_inquiry(int ctlr, int logvol,
-			int withirq, sector_t total_size,
+			sector_t total_size,
 			unsigned int block_size, InquiryData_struct *inq_buff,
 				   drive_info_struct *drv);
 static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
 					   __u32);
 static void start_io(ctlr_info_t *h);
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
-		   __u8 page_code, unsigned char *scsi3addr, int cmd_type);
 static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
 			__u8 page_code, unsigned char scsi3addr[],
 			int cmd_type);
@@ -424,12 +422,9 @@
 	if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
 		struct seq_file *seq = file->private_data;
 		ctlr_info_t *h = seq->private;
-		int rc;
 
-		rc = cciss_engage_scsi(h->ctlr);
-		if (rc != 0)
-			err = -rc;
-		else
+		err = cciss_engage_scsi(h->ctlr);
+		if (err == 0)
 			err = length;
 	} else
 #endif /* CONFIG_CISS_SCSI_TAPE */
@@ -482,7 +477,7 @@
 
 	return count;
 }
-DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
+static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
 
 static ssize_t dev_show_unique_id(struct device *dev,
 				 struct device_attribute *attr,
@@ -512,7 +507,7 @@
 				sn[8], sn[9], sn[10], sn[11],
 				sn[12], sn[13], sn[14], sn[15]);
 }
-DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
+static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
 
 static ssize_t dev_show_vendor(struct device *dev,
 			       struct device_attribute *attr,
@@ -536,7 +531,7 @@
 	else
 		return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
 }
-DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
+static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
 
 static ssize_t dev_show_model(struct device *dev,
 			      struct device_attribute *attr,
@@ -560,7 +555,7 @@
 	else
 		return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
 }
-DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
+static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
 
 static ssize_t dev_show_rev(struct device *dev,
 			    struct device_attribute *attr,
@@ -584,7 +579,7 @@
 	else
 		return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
 }
-DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
+static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
 
 static ssize_t cciss_show_lunid(struct device *dev,
 				struct device_attribute *attr, char *buf)
@@ -609,7 +604,7 @@
 		lunid[0], lunid[1], lunid[2], lunid[3],
 		lunid[4], lunid[5], lunid[6], lunid[7]);
 }
-DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
+static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
 
 static ssize_t cciss_show_raid_level(struct device *dev,
 				     struct device_attribute *attr, char *buf)
@@ -632,7 +627,7 @@
 	return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
 			raid_label[raid]);
 }
-DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
+static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
 
 static ssize_t cciss_show_usage_count(struct device *dev,
 				      struct device_attribute *attr, char *buf)
@@ -651,7 +646,7 @@
 	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 	return snprintf(buf, 20, "%d\n", count);
 }
-DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
+static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
 
 static struct attribute *cciss_host_attrs[] = {
 	&dev_attr_rescan.attr,
@@ -1657,9 +1652,11 @@
 {
 	CommandList_struct *cmd = rq->completion_data;
 	ctlr_info_t *h = hba[cmd->ctlr];
+	SGDescriptor_struct *curr_sg = cmd->SG;
 	unsigned long flags;
 	u64bit temp64;
 	int i, ddir;
+	int sg_index = 0;
 
 	if (cmd->Request.Type.Direction == XFER_READ)
 		ddir = PCI_DMA_FROMDEVICE;
@@ -1669,9 +1666,22 @@
 	/* command did not need to be retried */
 	/* unmap the DMA mapping for all the scatter gather elements */
 	for (i = 0; i < cmd->Header.SGList; i++) {
-		temp64.val32.lower = cmd->SG[i].Addr.lower;
-		temp64.val32.upper = cmd->SG[i].Addr.upper;
-		pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
+		if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
+			temp64.val32.lower = cmd->SG[i].Addr.lower;
+			temp64.val32.upper = cmd->SG[i].Addr.upper;
+			pci_dma_sync_single_for_cpu(h->pdev, temp64.val,
+						cmd->SG[i].Len, ddir);
+			pci_unmap_single(h->pdev, temp64.val,
+						cmd->SG[i].Len, ddir);
+			/* Point to the next block */
+			curr_sg = h->cmd_sg_list[cmd->cmdindex]->sgchain;
+			sg_index = 0;
+		}
+		temp64.val32.lower = curr_sg[sg_index].Addr.lower;
+		temp64.val32.upper = curr_sg[sg_index].Addr.upper;
+		pci_unmap_page(h->pdev, temp64.val, curr_sg[sg_index].Len,
+				ddir);
+		++sg_index;
 	}
 
 #ifdef CCISS_DEBUG
@@ -1701,7 +1711,7 @@
  * via the inquiry page 0.  Model, vendor, and rev are set to empty strings if
  * they cannot be read.
  */
-static void cciss_get_device_descr(int ctlr, int logvol, int withirq,
+static void cciss_get_device_descr(int ctlr, int logvol,
 				   char *vendor, char *model, char *rev)
 {
 	int rc;
@@ -1717,14 +1727,8 @@
 		return;
 
 	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
-	if (withirq)
-		rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf,
-			     sizeof(InquiryData_struct), 0,
-				scsi3addr, TYPE_CMD);
-	else
-		rc = sendcmd(CISS_INQUIRY, ctlr, inq_buf,
-			     sizeof(InquiryData_struct), 0,
-				scsi3addr, TYPE_CMD);
+	rc = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buf, sizeof(*inq_buf), 0,
+			scsi3addr, TYPE_CMD);
 	if (rc == IO_OK) {
 		memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
 		vendor[VENDOR_LEN] = '\0';
@@ -1743,7 +1747,7 @@
  * number cannot be had, for whatever reason, 16 bytes of 0xff
  * are returned instead.
  */
-static void cciss_get_serial_no(int ctlr, int logvol, int withirq,
+static void cciss_get_serial_no(int ctlr, int logvol,
 				unsigned char *serial_no, int buflen)
 {
 #define PAGE_83_INQ_BYTES 64
@@ -1759,12 +1763,8 @@
 		return;
 	memset(serial_no, 0, buflen);
 	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
-	if (withirq)
-		rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
-			PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
-	else
-		rc = sendcmd(CISS_INQUIRY, ctlr, buf,
-			PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
+	rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf,
+		PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
 	if (rc == IO_OK)
 		memcpy(serial_no, &buf[8], buflen);
 	kfree(buf);
@@ -1793,10 +1793,10 @@
 	blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
 
 	/* This is a hardware imposed limit. */
-	blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
+	blk_queue_max_hw_segments(disk->queue, h->maxsgentries);
 
 	/* This is a limit in the driver and could be eliminated. */
-	blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
+	blk_queue_max_phys_segments(disk->queue, h->maxsgentries);
 
 	blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
 
@@ -1852,18 +1852,16 @@
 
 	/* testing to see if 16-byte CDBs are already being used */
 	if (h->cciss_read == CCISS_READ_16) {
-		cciss_read_capacity_16(h->ctlr, drv_index, 1,
+		cciss_read_capacity_16(h->ctlr, drv_index,
 			&total_size, &block_size);
 
 	} else {
-		cciss_read_capacity(ctlr, drv_index, 1,
-				    &total_size, &block_size);
-
+		cciss_read_capacity(ctlr, drv_index, &total_size, &block_size);
 		/* if read_capacity returns all F's this volume is >2TB */
 		/* in size so we switch to 16-byte CDB's for all */
 		/* read/write ops */
 		if (total_size == 0xFFFFFFFFULL) {
-			cciss_read_capacity_16(ctlr, drv_index, 1,
+			cciss_read_capacity_16(ctlr, drv_index,
 			&total_size, &block_size);
 			h->cciss_read = CCISS_READ_16;
 			h->cciss_write = CCISS_WRITE_16;
@@ -1873,14 +1871,14 @@
 		}
 	}
 
-	cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
+	cciss_geometry_inquiry(ctlr, drv_index, total_size, block_size,
 			       inq_buff, drvinfo);
 	drvinfo->block_size = block_size;
 	drvinfo->nr_blocks = total_size + 1;
 
-	cciss_get_device_descr(ctlr, drv_index, 1, drvinfo->vendor,
+	cciss_get_device_descr(ctlr, drv_index, drvinfo->vendor,
 				drvinfo->model, drvinfo->rev);
-	cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
+	cciss_get_serial_no(ctlr, drv_index, drvinfo->serial_no,
 			sizeof(drvinfo->serial_no));
 	/* Save the lunid in case we deregister the disk, below. */
 	memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
@@ -2531,6 +2529,8 @@
 		case 0: return IO_OK; /* no sense */
 		case 1: return IO_OK; /* recovered error */
 		default:
+			if (check_for_unit_attention(h, c))
+				return IO_NEEDS_RETRY;
 			printk(KERN_WARNING "cciss%d: cmd 0x%02x "
 				"check condition, sense key = 0x%02x\n",
 				h->ctlr, c->Request.CDB[0],
@@ -2672,7 +2672,7 @@
 }
 
 static void cciss_geometry_inquiry(int ctlr, int logvol,
-				   int withirq, sector_t total_size,
+				   sector_t total_size,
 				   unsigned int block_size,
 				   InquiryData_struct *inq_buff,
 				   drive_info_struct *drv)
@@ -2683,14 +2683,8 @@
 
 	memset(inq_buff, 0, sizeof(InquiryData_struct));
 	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
-	if (withirq)
-		return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
-					      inq_buff, sizeof(*inq_buff),
-					      0xC1, scsi3addr, TYPE_CMD);
-	else
-		return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
-				      sizeof(*inq_buff), 0xC1, scsi3addr,
-				      TYPE_CMD);
+	return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, inq_buff,
+			sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
 	if (return_code == IO_OK) {
 		if (inq_buff->data_byte[8] == 0xFF) {
 			printk(KERN_WARNING
@@ -2723,7 +2717,7 @@
 }
 
 static void
-cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
+cciss_read_capacity(int ctlr, int logvol, sector_t *total_size,
 		    unsigned int *block_size)
 {
 	ReadCapdata_struct *buf;
@@ -2737,14 +2731,8 @@
 	}
 
 	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
-	if (withirq)
-		return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
-				ctlr, buf, sizeof(ReadCapdata_struct),
-					0, scsi3addr, TYPE_CMD);
-	else
-		return_code = sendcmd(CCISS_READ_CAPACITY,
-				ctlr, buf, sizeof(ReadCapdata_struct),
-					0, scsi3addr, TYPE_CMD);
+	return_code = sendcmd_withirq(CCISS_READ_CAPACITY, ctlr, buf,
+		sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD);
 	if (return_code == IO_OK) {
 		*total_size = be32_to_cpu(*(__be32 *) buf->total_size);
 		*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
@@ -2756,8 +2744,8 @@
 	kfree(buf);
 }
 
-static void
-cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size, 				unsigned int *block_size)
+static void cciss_read_capacity_16(int ctlr, int logvol,
+	sector_t *total_size, unsigned int *block_size)
 {
 	ReadCapdata_struct_16 *buf;
 	int return_code;
@@ -2770,16 +2758,9 @@
 	}
 
 	log_unit_to_scsi3addr(hba[ctlr], scsi3addr, logvol);
-	if (withirq) {
-		return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
-			ctlr, buf, sizeof(ReadCapdata_struct_16),
-				0, scsi3addr, TYPE_CMD);
-	}
-	else {
-		return_code = sendcmd(CCISS_READ_CAPACITY_16,
-			ctlr, buf, sizeof(ReadCapdata_struct_16),
-				0, scsi3addr, TYPE_CMD);
-	}
+	return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
+		ctlr, buf, sizeof(ReadCapdata_struct_16),
+			0, scsi3addr, TYPE_CMD);
 	if (return_code == IO_OK) {
 		*total_size = be64_to_cpu(*(__be64 *) buf->total_size);
 		*block_size = be32_to_cpu(*(__be32 *) buf->block_size);
@@ -2820,13 +2801,13 @@
 		return 1;
 	}
 	if (h->cciss_read == CCISS_READ_10) {
-		cciss_read_capacity(h->ctlr, logvol, 1,
+		cciss_read_capacity(h->ctlr, logvol,
 					&total_size, &block_size);
 	} else {
-		cciss_read_capacity_16(h->ctlr, logvol, 1,
+		cciss_read_capacity_16(h->ctlr, logvol,
 					&total_size, &block_size);
 	}
-	cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
+	cciss_geometry_inquiry(h->ctlr, logvol, total_size, block_size,
 			       inq_buff, drv);
 
 	blk_queue_logical_block_size(drv->queue, drv->block_size);
@@ -2837,167 +2818,6 @@
 }
 
 /*
- *   Wait polling for a command to complete.
- *   The memory mapped FIFO is polled for the completion.
- *   Used only at init time, interrupts from the HBA are disabled.
- */
-static unsigned long pollcomplete(int ctlr)
-{
-	unsigned long done;
-	int i;
-
-	/* Wait (up to 20 seconds) for a command to complete */
-
-	for (i = 20 * HZ; i > 0; i--) {
-		done = hba[ctlr]->access.command_completed(hba[ctlr]);
-		if (done == FIFO_EMPTY)
-			schedule_timeout_uninterruptible(1);
-		else
-			return done;
-	}
-	/* Invalid address to tell caller we ran out of time */
-	return 1;
-}
-
-/* Send command c to controller h and poll for it to complete.
- * Turns interrupts off on the board.  Used at driver init time
- * and during SCSI error recovery.
- */
-static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
-{
-	int i;
-	unsigned long complete;
-	int status = IO_ERROR;
-	u64bit buff_dma_handle;
-
-resend_cmd1:
-
-	/* Disable interrupt on the board. */
-	h->access.set_intr_mask(h, CCISS_INTR_OFF);
-
-	/* Make sure there is room in the command FIFO */
-	/* Actually it should be completely empty at this time */
-	/* unless we are in here doing error handling for the scsi */
-	/* tape side of the driver. */
-	for (i = 200000; i > 0; i--) {
-		/* if fifo isn't full go */
-		if (!(h->access.fifo_full(h)))
-			break;
-		udelay(10);
-		printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
-		       " waiting!\n", h->ctlr);
-	}
-	h->access.submit_command(h, c); /* Send the cmd */
-	do {
-		complete = pollcomplete(h->ctlr);
-
-#ifdef CCISS_DEBUG
-		printk(KERN_DEBUG "cciss: command completed\n");
-#endif				/* CCISS_DEBUG */
-
-		if (complete == 1) {
-			printk(KERN_WARNING
-			       "cciss cciss%d: SendCmd Timeout out, "
-			       "No command list address returned!\n", h->ctlr);
-			status = IO_ERROR;
-			break;
-		}
-
-		/* Make sure it's the command we're expecting. */
-		if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
-			printk(KERN_WARNING "cciss%d: Unexpected command "
-				"completion.\n", h->ctlr);
-			continue;
-		}
-
-		/* It is our command.  If no error, we're done. */
-		if (!(complete & CISS_ERROR_BIT)) {
-			status = IO_OK;
-			break;
-		}
-
-		/* There is an error... */
-
-		/* if data overrun or underun on Report command ignore it */
-		if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
-		     (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
-		     (c->Request.CDB[0] == CISS_INQUIRY)) &&
-			((c->err_info->CommandStatus == CMD_DATA_OVERRUN) ||
-			 (c->err_info->CommandStatus == CMD_DATA_UNDERRUN))) {
-			complete = c->busaddr;
-			status = IO_OK;
-			break;
-		}
-
-		if (c->err_info->CommandStatus == CMD_UNSOLICITED_ABORT) {
-			printk(KERN_WARNING "cciss%d: unsolicited abort %p\n",
-				h->ctlr, c);
-			if (c->retry_count < MAX_CMD_RETRIES) {
-				printk(KERN_WARNING "cciss%d: retrying %p\n",
-				   h->ctlr, c);
-				c->retry_count++;
-				/* erase the old error information */
-				memset(c->err_info, 0, sizeof(c->err_info));
-				goto resend_cmd1;
-			}
-			printk(KERN_WARNING "cciss%d: retried %p too many "
-				"times\n", h->ctlr, c);
-			status = IO_ERROR;
-			break;
-		}
-
-		if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
-			printk(KERN_WARNING "cciss%d: command could not be "
-				"aborted.\n", h->ctlr);
-			status = IO_ERROR;
-			break;
-		}
-
-		if (c->err_info->CommandStatus == CMD_TARGET_STATUS) {
-			status = check_target_status(h, c);
-			break;
-		}
-
-		printk(KERN_WARNING "cciss%d: sendcmd error\n", h->ctlr);
-		printk(KERN_WARNING "cmd = 0x%02x, CommandStatus = 0x%02x\n",
-			c->Request.CDB[0], c->err_info->CommandStatus);
-		status = IO_ERROR;
-		break;
-
-	} while (1);
-
-	/* unlock the data buffer from DMA */
-	buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
-	buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
-	pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
-			 c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
-	return status;
-}
-
-/*
- * Send a command to the controller, and wait for it to complete.
- * Used at init time, and during SCSI error recovery.
- */
-static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
-	__u8 page_code, unsigned char *scsi3addr, int cmd_type)
-{
-	CommandList_struct *c;
-	int status;
-
-	c = cmd_alloc(hba[ctlr], 1);
-	if (!c) {
-		printk(KERN_WARNING "cciss: unable to get memory");
-		return IO_ERROR;
-	}
-	status = fill_cmd(c, cmd, ctlr, buff, size, page_code,
-		scsi3addr, cmd_type);
-	if (status == IO_OK)
-		status = sendcmd_core(hba[ctlr], c);
-	cmd_free(hba[ctlr], c, 1);
-	return status;
-}
-
-/*
  * Map (physical) PCI mem into (virtual) kernel space
  */
 static void __iomem *remap_pci_mem(ulong base, ulong size)
@@ -3255,9 +3075,13 @@
 	int seg;
 	struct request *creq;
 	u64bit temp64;
-	struct scatterlist tmp_sg[MAXSGENTRIES];
+	struct scatterlist *tmp_sg;
+	SGDescriptor_struct *curr_sg;
 	drive_info_struct *drv;
 	int i, dir;
+	int nseg = 0;
+	int sg_index = 0;
+	int chained = 0;
 
 	/* We call start_io here in case there is a command waiting on the
 	 * queue that has not been sent.
@@ -3270,13 +3094,14 @@
 	if (!creq)
 		goto startio;
 
-	BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
+	BUG_ON(creq->nr_phys_segments > h->maxsgentries);
 
 	if ((c = cmd_alloc(h, 1)) == NULL)
 		goto full;
 
 	blk_start_request(creq);
 
+	tmp_sg = h->scatter_list[c->cmdindex];
 	spin_unlock_irq(q->queue_lock);
 
 	c->cmd_type = CMD_RWREQ;
@@ -3305,7 +3130,7 @@
 	       (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
 #endif				/* CCISS_DEBUG */
 
-	sg_init_table(tmp_sg, MAXSGENTRIES);
+	sg_init_table(tmp_sg, h->maxsgentries);
 	seg = blk_rq_map_sg(q, creq, tmp_sg);
 
 	/* get the DMA records for the setup */
@@ -3314,25 +3139,70 @@
 	else
 		dir = PCI_DMA_TODEVICE;
 
+	curr_sg = c->SG;
+	sg_index = 0;
+	chained = 0;
+
 	for (i = 0; i < seg; i++) {
-		c->SG[i].Len = tmp_sg[i].length;
+		if (((sg_index+1) == (h->max_cmd_sgentries)) &&
+			!chained && ((seg - i) > 1)) {
+			nseg = seg - i;
+			curr_sg[sg_index].Len = (nseg) *
+					sizeof(SGDescriptor_struct);
+			curr_sg[sg_index].Ext = CCISS_SG_CHAIN;
+
+			/* Point to next chain block. */
+			curr_sg = h->cmd_sg_list[c->cmdindex]->sgchain;
+			sg_index = 0;
+			chained = 1;
+		}
+		curr_sg[sg_index].Len = tmp_sg[i].length;
 		temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
-						  tmp_sg[i].offset,
-						  tmp_sg[i].length, dir);
-		c->SG[i].Addr.lower = temp64.val32.lower;
-		c->SG[i].Addr.upper = temp64.val32.upper;
-		c->SG[i].Ext = 0;	// we are not chaining
+						tmp_sg[i].offset,
+						tmp_sg[i].length, dir);
+		curr_sg[sg_index].Addr.lower = temp64.val32.lower;
+		curr_sg[sg_index].Addr.upper = temp64.val32.upper;
+		curr_sg[sg_index].Ext = 0;  /* we are not chaining */
+
+		++sg_index;
 	}
+
+	if (chained) {
+		int len;
+		curr_sg = c->SG;
+		sg_index = h->max_cmd_sgentries - 1;
+		len = curr_sg[sg_index].Len;
+		/* Setup pointer to next chain block.
+		 * Fill out last element in current chain
+		 * block with address of next chain block.
+		 */
+		temp64.val = pci_map_single(h->pdev,
+					h->cmd_sg_list[c->cmdindex]->sgchain,
+					len, dir);
+
+		h->cmd_sg_list[c->cmdindex]->sg_chain_dma = temp64.val;
+		curr_sg[sg_index].Addr.lower = temp64.val32.lower;
+		curr_sg[sg_index].Addr.upper = temp64.val32.upper;
+
+		pci_dma_sync_single_for_device(h->pdev,
+				h->cmd_sg_list[c->cmdindex]->sg_chain_dma,
+				len, dir);
+	}
+
 	/* track how many SG entries we are using */
 	if (seg > h->maxSG)
 		h->maxSG = seg;
 
 #ifdef CCISS_DEBUG
-	printk(KERN_DEBUG "cciss: Submitting %u sectors in %d segments\n",
-	       blk_rq_sectors(creq), seg);
+	printk(KERN_DEBUG "cciss: Submitting %ld sectors in %d segments "
+			"chained[%d]\n",
+			blk_rq_sectors(creq), seg, chained);
 #endif				/* CCISS_DEBUG */
 
-	c->Header.SGList = c->Header.SGTotal = seg;
+	c->Header.SGList = c->Header.SGTotal = seg + chained;
+	if (seg > h->max_cmd_sgentries)
+		c->Header.SGList = h->max_cmd_sgentries;
+
 	if (likely(blk_fs_request(creq))) {
 		if(h->cciss_read == CCISS_READ_10) {
 			c->Request.CDB[1] = 0;
@@ -3513,28 +3383,33 @@
  * @h:			   Pointer to the controller.
  *
  * Removes the controller from the rescan queue if present. Blocks if
- * the controller is currently conducting a rescan.
+ * the controller is currently conducting a rescan.  The controller
+ * can be in one of three states:
+ * 1. Doesn't need a scan
+ * 2. On the scan list, but not scanning yet (we remove it)
+ * 3. Busy scanning (and not on the list). In this case we want to wait for
+ *    the scan to complete to make sure the scanning thread for this
+ *    controller is completely idle.
  **/
 static void remove_from_scan_list(struct ctlr_info *h)
 {
 	struct ctlr_info *test_h, *tmp_h;
-	int scanning = 0;
 
 	mutex_lock(&scan_mutex);
 	list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
-		if (test_h == h) {
+		if (test_h == h) { /* state 2. */
 			list_del(&h->scan_list);
 			complete_all(&h->scan_wait);
 			mutex_unlock(&scan_mutex);
 			return;
 		}
 	}
-	if (&h->busy_scanning)
-		scanning = 0;
-	mutex_unlock(&scan_mutex);
-
-	if (scanning)
+	if (h->busy_scanning) { /* state 3. */
+		mutex_unlock(&scan_mutex);
 		wait_for_completion(&h->scan_wait);
+	} else { /* state 1, nothing to do. */
+		mutex_unlock(&scan_mutex);
+	}
 }
 
 /**
@@ -3573,13 +3448,11 @@
 			h->busy_scanning = 1;
 			mutex_unlock(&scan_mutex);
 
-			if (h) {
-				rebuild_lun_table(h, 0, 0);
-				complete_all(&h->scan_wait);
-				mutex_lock(&scan_mutex);
-				h->busy_scanning = 0;
-				mutex_unlock(&scan_mutex);
-			}
+			rebuild_lun_table(h, 0, 0);
+			complete_all(&h->scan_wait);
+			mutex_lock(&scan_mutex);
+			h->busy_scanning = 0;
+			mutex_unlock(&scan_mutex);
 		}
 	}
 
@@ -3605,8 +3478,22 @@
 	case REPORT_LUNS_CHANGED:
 		printk(KERN_WARNING "cciss%d: report LUN data "
 			"changed\n", h->ctlr);
-		add_to_scan_list(h);
-		wake_up_process(cciss_scan_thread);
+	/*
+	 * Here, we could call add_to_scan_list and wake up the scan thread,
+	 * except that it's quite likely that we will get more than one
+	 * REPORT_LUNS_CHANGED condition in quick succession, which means
+	 * that those which occur after the first one will likely happen
+	 * *during* the scan_thread's rescan.  And the rescan code is not
+	 * robust enough to restart in the middle, undoing what it has already
+	 * done, and it's not clear that it's even possible to do this, since
+	 * part of what it does is notify the block layer, which starts
+	 * doing it's own i/o to read partition tables and so on, and the
+	 * driver doesn't have visibility to know what might need undoing.
+	 * In any event, if possible, it is horribly complicated to get right
+	 * so we just don't do it for now.
+	 *
+	 * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
+	 */
 		return 1;
 	break;
 	case POWER_OR_RESET:
@@ -3888,6 +3775,23 @@
 	 * leave a little room for ioctl calls.
 	 */
 	c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
+	c->maxsgentries = readl(&(c->cfgtable->MaxSGElements));
+
+	/*
+	 * Limit native command to 32 s/g elements to save dma'able memory.
+	 * Howvever spec says if 0, use 31
+	 */
+
+	c->max_cmd_sgentries = 31;
+	if (c->maxsgentries > 512) {
+		c->max_cmd_sgentries = 32;
+		c->chainsize = c->maxsgentries - c->max_cmd_sgentries + 1;
+		c->maxsgentries -= 1;   /* account for chain pointer */
+	} else {
+		c->maxsgentries = 31;   /* Default to traditional value */
+		c->chainsize = 0;       /* traditional */
+	}
+
 	c->product_name = products[prod_index].product_name;
 	c->access = *(products[prod_index].access);
 	c->nr_cmds = c->max_commands - 4;
@@ -4214,6 +4118,7 @@
 {
 	int i;
 	int j = 0;
+	int k = 0;
 	int rc;
 	int dac, return_code;
 	InquiryData_struct *inq_buff;
@@ -4317,6 +4222,53 @@
 		printk(KERN_ERR "cciss: out of memory");
 		goto clean4;
 	}
+
+	/* Need space for temp scatter list */
+	hba[i]->scatter_list = kmalloc(hba[i]->max_commands *
+						sizeof(struct scatterlist *),
+						GFP_KERNEL);
+	for (k = 0; k < hba[i]->nr_cmds; k++) {
+		hba[i]->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
+							hba[i]->maxsgentries,
+							GFP_KERNEL);
+		if (hba[i]->scatter_list[k] == NULL) {
+			printk(KERN_ERR "cciss%d: could not allocate "
+				"s/g lists\n", i);
+			goto clean4;
+		}
+	}
+	hba[i]->cmd_sg_list = kmalloc(sizeof(struct Cmd_sg_list *) *
+						hba[i]->nr_cmds,
+						GFP_KERNEL);
+	if (!hba[i]->cmd_sg_list) {
+		printk(KERN_ERR "cciss%d: Cannot get memory for "
+			"s/g chaining.\n", i);
+		goto clean4;
+	}
+	/* Build up chain blocks for each command */
+	if (hba[i]->chainsize > 0) {
+		for (j = 0; j < hba[i]->nr_cmds; j++) {
+			hba[i]->cmd_sg_list[j] =
+					kmalloc(sizeof(struct Cmd_sg_list),
+							GFP_KERNEL);
+			if (!hba[i]->cmd_sg_list[j]) {
+				printk(KERN_ERR "cciss%d: Cannot get memory "
+					"for chain block.\n", i);
+				goto clean4;
+			}
+			/* Need a block of chainsized s/g elements. */
+			hba[i]->cmd_sg_list[j]->sgchain =
+					kmalloc((hba[i]->chainsize *
+						sizeof(SGDescriptor_struct)),
+						GFP_KERNEL);
+			if (!hba[i]->cmd_sg_list[j]->sgchain) {
+				printk(KERN_ERR "cciss%d: Cannot get memory "
+					"for s/g chains\n", i);
+				goto clean4;
+			}
+		}
+	}
+
 	spin_lock_init(&hba[i]->lock);
 
 	/* Initialize the pdev driver private data.
@@ -4362,7 +4314,7 @@
 
 	cciss_procinit(i);
 
-	hba[i]->cciss_max_sectors = 2048;
+	hba[i]->cciss_max_sectors = 8192;
 
 	rebuild_lun_table(hba[i], 1, 0);
 	hba[i]->busy_initializing = 0;
@@ -4370,6 +4322,20 @@
 
 clean4:
 	kfree(hba[i]->cmd_pool_bits);
+	/* Free up sg elements */
+	for (k = 0; k < hba[i]->nr_cmds; k++)
+		kfree(hba[i]->scatter_list[k]);
+	kfree(hba[i]->scatter_list);
+	/* Only free up extra s/g lists if controller supports them */
+	if (hba[i]->chainsize > 0) {
+		for (j = 0; j < hba[i]->nr_cmds; j++) {
+			if (hba[i]->cmd_sg_list[j]) {
+				kfree(hba[i]->cmd_sg_list[j]->sgchain);
+				kfree(hba[i]->cmd_sg_list[j]);
+			}
+		}
+		kfree(hba[i]->cmd_sg_list);
+	}
 	if (hba[i]->cmd_pool)
 		pci_free_consistent(hba[i]->pdev,
 				    hba[i]->nr_cmds * sizeof(CommandList_struct),
@@ -4400,30 +4366,28 @@
 
 static void cciss_shutdown(struct pci_dev *pdev)
 {
-	ctlr_info_t *tmp_ptr;
-	int i;
-	char flush_buf[4];
+	ctlr_info_t *h;
+	char *flush_buf;
 	int return_code;
 
-	tmp_ptr = pci_get_drvdata(pdev);
-	if (tmp_ptr == NULL)
+	h = pci_get_drvdata(pdev);
+	flush_buf = kzalloc(4, GFP_KERNEL);
+	if (!flush_buf) {
+		printk(KERN_WARNING
+			"cciss:%d cache not flushed, out of memory.\n",
+			h->ctlr);
 		return;
-	i = tmp_ptr->ctlr;
-	if (hba[i] == NULL)
-		return;
-
-	/* Turn board interrupts off  and send the flush cache command */
-	/* sendcmd will turn off interrupt, and send the flush...
-	 * To write all data in the battery backed cache to disks */
-	memset(flush_buf, 0, 4);
-	return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0,
-		CTLR_LUNID, TYPE_CMD);
-	if (return_code == IO_OK) {
-		printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
-	} else {
-		printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
 	}
-	free_irq(hba[i]->intr[2], hba[i]);
+	/* write all data in the battery backed cache to disk */
+	memset(flush_buf, 0, 4);
+	return_code = sendcmd_withirq(CCISS_CACHE_FLUSH, h->ctlr, flush_buf,
+		4, 0, CTLR_LUNID, TYPE_CMD);
+	kfree(flush_buf);
+	if (return_code != IO_OK)
+		printk(KERN_WARNING "cciss%d: Error flushing cache\n",
+			h->ctlr);
+	h->access.set_intr_mask(h, CCISS_INTR_OFF);
+	free_irq(h->intr[2], h);
 }
 
 static void __devexit cciss_remove_one(struct pci_dev *pdev)
@@ -4485,6 +4449,20 @@
 	pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
 			    hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
 	kfree(hba[i]->cmd_pool_bits);
+	/* Free up sg elements */
+	for (j = 0; j < hba[i]->nr_cmds; j++)
+		kfree(hba[i]->scatter_list[j]);
+	kfree(hba[i]->scatter_list);
+	/* Only free up extra s/g lists if controller supports them */
+	if (hba[i]->chainsize > 0) {
+		for (j = 0; j < hba[i]->nr_cmds; j++) {
+			if (hba[i]->cmd_sg_list[j]) {
+				kfree(hba[i]->cmd_sg_list[j]->sgchain);
+				kfree(hba[i]->cmd_sg_list[j]);
+			}
+		}
+		kfree(hba[i]->cmd_sg_list);
+	}
 	/*
 	 * Deliberately omit pci_disable_device(): it does something nasty to
 	 * Smart Array controllers that pci_enable_device does not undo
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 31524cf..1d95db2 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -55,7 +55,13 @@
 	char device_initialized;     /* indicates whether dev is initialized */
 } drive_info_struct;
 
-struct ctlr_info 
+struct Cmd_sg_list {
+	SGDescriptor_struct	*sgchain;
+	dma_addr_t		sg_chain_dma;
+	int			chain_block_size;
+};
+
+struct ctlr_info
 {
 	int	ctlr;
 	char	devname[8];
@@ -75,6 +81,16 @@
 	int	num_luns;
 	int 	highest_lun;
 	int	usage_count;  /* number of opens all all minor devices */
+	/* Need space for temp sg list
+	 * number of scatter/gathers supported
+	 * number of scatter/gathers in chained block
+	 */
+	struct	scatterlist **scatter_list;
+	int	maxsgentries;
+	int	chainsize;
+	int	max_cmd_sgentries;
+	struct Cmd_sg_list **cmd_sg_list;
+
 #	define DOORBELL_INT	0
 #	define PERF_MODE_INT	1
 #	define SIMPLE_MODE_INT	2
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index dbaed1e..b50a9b2 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -7,7 +7,8 @@
 
 //general boundary defintions
 #define SENSEINFOBYTES          32//note that this value may vary between host implementations
-#define MAXSGENTRIES            31
+#define MAXSGENTRIES            32
+#define CCISS_SG_CHAIN          0x80000000
 #define MAXREPLYQS              256
 
 //Command Status value
@@ -319,6 +320,10 @@
   BYTE             ServerName[16];
   DWORD            HeartBeat;
   DWORD            SCSI_Prefetch;
+  DWORD            MaxSGElements;
+  DWORD            MaxLogicalUnits;
+  DWORD            MaxPhysicalDrives;
+  DWORD            MaxPhysicalDrivesPerLogicalUnit;
 } CfgTable_struct;
 #pragma pack()	 
 #endif // CCISS_CMD_H
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 3315268..5d0e46d 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -755,7 +755,7 @@
                         			cp,  
 						ei->ScsiStatus); 
 #endif
-					cmd->result |= (ei->ScsiStatus < 1);
+					cmd->result |= (ei->ScsiStatus << 1);
                 		}
 				else {  /* scsi status is zero??? How??? */
 					
@@ -1547,7 +1547,7 @@
 	if (sa->registered) {
 		printk("cciss%d: SCSI subsystem already engaged.\n", ctlr);
 		spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
-		return ENXIO;
+		return -ENXIO;
 	}
 	sa->registered = 1;
 	spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
diff --git a/drivers/block/drbd/Kconfig b/drivers/block/drbd/Kconfig
new file mode 100644
index 0000000..f4acd04
--- /dev/null
+++ b/drivers/block/drbd/Kconfig
@@ -0,0 +1,71 @@
+#
+# DRBD device driver configuration
+#
+
+comment "DRBD disabled because PROC_FS, INET or CONNECTOR not selected"
+	depends on !PROC_FS || !INET || !CONNECTOR
+
+config BLK_DEV_DRBD
+	tristate "DRBD Distributed Replicated Block Device support"
+	depends on PROC_FS && INET && CONNECTOR
+	select LRU_CACHE
+	default n
+	help
+
+	  NOTE: In order to authenticate connections you have to select
+	  CRYPTO_HMAC and a hash function as well.
+
+	  DRBD is a shared-nothing, synchronously replicated block device. It
+	  is designed to serve as a building block for high availability
+	  clusters and in this context, is a "drop-in" replacement for shared
+	  storage. Simplistically, you could see it as a network RAID 1.
+
+	  Each minor device has a role, which can be 'primary' or 'secondary'.
+	  On the node with the primary device the application is supposed to
+	  run and to access the device (/dev/drbdX). Every write is sent to
+	  the local 'lower level block device' and, across the network, to the
+	  node with the device in 'secondary' state.  The secondary device
+	  simply writes the data to its lower level block device.
+
+	  DRBD can also be used in dual-Primary mode (device writable on both
+	  nodes), which means it can exhibit shared disk semantics in a
+	  shared-nothing cluster.  Needless to say, on top of dual-Primary
+	  DRBD utilizing a cluster file system is necessary to maintain for
+	  cache coherency.
+
+	  For automatic failover you need a cluster manager (e.g. heartbeat).
+	  See also: http://www.drbd.org/, http://www.linux-ha.org
+
+	  If unsure, say N.
+
+config DRBD_FAULT_INJECTION
+	bool "DRBD fault injection"
+	depends on BLK_DEV_DRBD
+	help
+
+	  Say Y here if you want to simulate IO errors, in order to test DRBD's
+	  behavior.
+
+	  The actual simulation of IO errors is done by writing 3 values to
+	  /sys/module/drbd/parameters/
+
+	  enable_faults: bitmask of...
+	  1	meta data write
+	  2               read
+	  4	resync data write
+	  8	            read
+	  16	data write
+	  32	data read
+	  64	read ahead
+	  128	kmalloc of bitmap
+	  256	allocation of EE (epoch_entries)
+
+	  fault_devs: bitmask of minor numbers
+	  fault_rate: frequency in percent
+
+	  Example: Simulate data write errors on /dev/drbd0 with a probability of 5%.
+		echo 16 > /sys/module/drbd/parameters/enable_faults
+		echo 1 > /sys/module/drbd/parameters/fault_devs
+		echo 5 > /sys/module/drbd/parameters/fault_rate
+
+	  If unsure, say N.
diff --git a/drivers/block/drbd/Makefile b/drivers/block/drbd/Makefile
new file mode 100644
index 0000000..0d3f337
--- /dev/null
+++ b/drivers/block/drbd/Makefile
@@ -0,0 +1,5 @@
+drbd-y := drbd_bitmap.o drbd_proc.o
+drbd-y += drbd_worker.o drbd_receiver.o drbd_req.o drbd_actlog.o
+drbd-y += drbd_main.o drbd_strings.o drbd_nl.o
+
+obj-$(CONFIG_BLK_DEV_DRBD)     += drbd.o
diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
new file mode 100644
index 0000000..17956ff
--- /dev/null
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -0,0 +1,1424 @@
+/*
+   drbd_actlog.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2003-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/slab.h>
+#include <linux/drbd.h>
+#include "drbd_int.h"
+#include "drbd_wrappers.h"
+
+/* We maintain a trivial check sum in our on disk activity log.
+ * With that we can ensure correct operation even when the storage
+ * device might do a partial (last) sector write while loosing power.
+ */
+struct __packed al_transaction {
+	u32       magic;
+	u32       tr_number;
+	struct __packed {
+		u32 pos;
+		u32 extent; } updates[1 + AL_EXTENTS_PT];
+	u32       xor_sum;
+};
+
+struct update_odbm_work {
+	struct drbd_work w;
+	unsigned int enr;
+};
+
+struct update_al_work {
+	struct drbd_work w;
+	struct lc_element *al_ext;
+	struct completion event;
+	unsigned int enr;
+	/* if old_enr != LC_FREE, write corresponding bitmap sector, too */
+	unsigned int old_enr;
+};
+
+struct drbd_atodb_wait {
+	atomic_t           count;
+	struct completion  io_done;
+	struct drbd_conf   *mdev;
+	int                error;
+};
+
+
+int w_al_write_transaction(struct drbd_conf *, struct drbd_work *, int);
+
+static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
+				 struct drbd_backing_dev *bdev,
+				 struct page *page, sector_t sector,
+				 int rw, int size)
+{
+	struct bio *bio;
+	struct drbd_md_io md_io;
+	int ok;
+
+	md_io.mdev = mdev;
+	init_completion(&md_io.event);
+	md_io.error = 0;
+
+	if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
+		rw |= (1 << BIO_RW_BARRIER);
+	rw |= ((1<<BIO_RW_UNPLUG) | (1<<BIO_RW_SYNCIO));
+
+ retry:
+	bio = bio_alloc(GFP_NOIO, 1);
+	bio->bi_bdev = bdev->md_bdev;
+	bio->bi_sector = sector;
+	ok = (bio_add_page(bio, page, size, 0) == size);
+	if (!ok)
+		goto out;
+	bio->bi_private = &md_io;
+	bio->bi_end_io = drbd_md_io_complete;
+	bio->bi_rw = rw;
+
+	if (FAULT_ACTIVE(mdev, (rw & WRITE) ? DRBD_FAULT_MD_WR : DRBD_FAULT_MD_RD))
+		bio_endio(bio, -EIO);
+	else
+		submit_bio(rw, bio);
+	wait_for_completion(&md_io.event);
+	ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0;
+
+	/* check for unsupported barrier op.
+	 * would rather check on EOPNOTSUPP, but that is not reliable.
+	 * don't try again for ANY return value != 0 */
+	if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER) && !ok)) {
+		/* Try again with no barrier */
+		dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
+		set_bit(MD_NO_BARRIER, &mdev->flags);
+		rw &= ~(1 << BIO_RW_BARRIER);
+		bio_put(bio);
+		goto retry;
+	}
+ out:
+	bio_put(bio);
+	return ok;
+}
+
+int drbd_md_sync_page_io(struct drbd_conf *mdev, struct drbd_backing_dev *bdev,
+			 sector_t sector, int rw)
+{
+	int logical_block_size, mask, ok;
+	int offset = 0;
+	struct page *iop = mdev->md_io_page;
+
+	D_ASSERT(mutex_is_locked(&mdev->md_io_mutex));
+
+	BUG_ON(!bdev->md_bdev);
+
+	logical_block_size = bdev_logical_block_size(bdev->md_bdev);
+	if (logical_block_size == 0)
+		logical_block_size = MD_SECTOR_SIZE;
+
+	/* in case logical_block_size != 512 [ s390 only? ] */
+	if (logical_block_size != MD_SECTOR_SIZE) {
+		mask = (logical_block_size / MD_SECTOR_SIZE) - 1;
+		D_ASSERT(mask == 1 || mask == 3 || mask == 7);
+		D_ASSERT(logical_block_size == (mask+1) * MD_SECTOR_SIZE);
+		offset = sector & mask;
+		sector = sector & ~mask;
+		iop = mdev->md_io_tmpp;
+
+		if (rw & WRITE) {
+			/* these are GFP_KERNEL pages, pre-allocated
+			 * on device initialization */
+			void *p = page_address(mdev->md_io_page);
+			void *hp = page_address(mdev->md_io_tmpp);
+
+			ok = _drbd_md_sync_page_io(mdev, bdev, iop, sector,
+					READ, logical_block_size);
+
+			if (unlikely(!ok)) {
+				dev_err(DEV, "drbd_md_sync_page_io(,%llus,"
+				    "READ [logical_block_size!=512]) failed!\n",
+				    (unsigned long long)sector);
+				return 0;
+			}
+
+			memcpy(hp + offset*MD_SECTOR_SIZE, p, MD_SECTOR_SIZE);
+		}
+	}
+
+	if (sector < drbd_md_first_sector(bdev) ||
+	    sector > drbd_md_last_sector(bdev))
+		dev_alert(DEV, "%s [%d]:%s(,%llus,%s) out of range md access!\n",
+		     current->comm, current->pid, __func__,
+		     (unsigned long long)sector, (rw & WRITE) ? "WRITE" : "READ");
+
+	ok = _drbd_md_sync_page_io(mdev, bdev, iop, sector, rw, logical_block_size);
+	if (unlikely(!ok)) {
+		dev_err(DEV, "drbd_md_sync_page_io(,%llus,%s) failed!\n",
+		    (unsigned long long)sector, (rw & WRITE) ? "WRITE" : "READ");
+		return 0;
+	}
+
+	if (logical_block_size != MD_SECTOR_SIZE && !(rw & WRITE)) {
+		void *p = page_address(mdev->md_io_page);
+		void *hp = page_address(mdev->md_io_tmpp);
+
+		memcpy(p, hp + offset*MD_SECTOR_SIZE, MD_SECTOR_SIZE);
+	}
+
+	return ok;
+}
+
+static struct lc_element *_al_get(struct drbd_conf *mdev, unsigned int enr)
+{
+	struct lc_element *al_ext;
+	struct lc_element *tmp;
+	unsigned long     al_flags = 0;
+
+	spin_lock_irq(&mdev->al_lock);
+	tmp = lc_find(mdev->resync, enr/AL_EXT_PER_BM_SECT);
+	if (unlikely(tmp != NULL)) {
+		struct bm_extent  *bm_ext = lc_entry(tmp, struct bm_extent, lce);
+		if (test_bit(BME_NO_WRITES, &bm_ext->flags)) {
+			spin_unlock_irq(&mdev->al_lock);
+			return NULL;
+		}
+	}
+	al_ext   = lc_get(mdev->act_log, enr);
+	al_flags = mdev->act_log->flags;
+	spin_unlock_irq(&mdev->al_lock);
+
+	/*
+	if (!al_ext) {
+		if (al_flags & LC_STARVING)
+			dev_warn(DEV, "Have to wait for LRU element (AL too small?)\n");
+		if (al_flags & LC_DIRTY)
+			dev_warn(DEV, "Ongoing AL update (AL device too slow?)\n");
+	}
+	*/
+
+	return al_ext;
+}
+
+void drbd_al_begin_io(struct drbd_conf *mdev, sector_t sector)
+{
+	unsigned int enr = (sector >> (AL_EXTENT_SHIFT-9));
+	struct lc_element *al_ext;
+	struct update_al_work al_work;
+
+	D_ASSERT(atomic_read(&mdev->local_cnt) > 0);
+
+	wait_event(mdev->al_wait, (al_ext = _al_get(mdev, enr)));
+
+	if (al_ext->lc_number != enr) {
+		/* drbd_al_write_transaction(mdev,al_ext,enr);
+		 * recurses into generic_make_request(), which
+		 * disallows recursion, bios being serialized on the
+		 * current->bio_tail list now.
+		 * we have to delegate updates to the activity log
+		 * to the worker thread. */
+		init_completion(&al_work.event);
+		al_work.al_ext = al_ext;
+		al_work.enr = enr;
+		al_work.old_enr = al_ext->lc_number;
+		al_work.w.cb = w_al_write_transaction;
+		drbd_queue_work_front(&mdev->data.work, &al_work.w);
+		wait_for_completion(&al_work.event);
+
+		mdev->al_writ_cnt++;
+
+		spin_lock_irq(&mdev->al_lock);
+		lc_changed(mdev->act_log, al_ext);
+		spin_unlock_irq(&mdev->al_lock);
+		wake_up(&mdev->al_wait);
+	}
+}
+
+void drbd_al_complete_io(struct drbd_conf *mdev, sector_t sector)
+{
+	unsigned int enr = (sector >> (AL_EXTENT_SHIFT-9));
+	struct lc_element *extent;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->al_lock, flags);
+
+	extent = lc_find(mdev->act_log, enr);
+
+	if (!extent) {
+		spin_unlock_irqrestore(&mdev->al_lock, flags);
+		dev_err(DEV, "al_complete_io() called on inactive extent %u\n", enr);
+		return;
+	}
+
+	if (lc_put(mdev->act_log, extent) == 0)
+		wake_up(&mdev->al_wait);
+
+	spin_unlock_irqrestore(&mdev->al_lock, flags);
+}
+
+int
+w_al_write_transaction(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	struct update_al_work *aw = container_of(w, struct update_al_work, w);
+	struct lc_element *updated = aw->al_ext;
+	const unsigned int new_enr = aw->enr;
+	const unsigned int evicted = aw->old_enr;
+	struct al_transaction *buffer;
+	sector_t sector;
+	int i, n, mx;
+	unsigned int extent_nr;
+	u32 xor_sum = 0;
+
+	if (!get_ldev(mdev)) {
+		dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n");
+		complete(&((struct update_al_work *)w)->event);
+		return 1;
+	}
+	/* do we have to do a bitmap write, first?
+	 * TODO reduce maximum latency:
+	 * submit both bios, then wait for both,
+	 * instead of doing two synchronous sector writes. */
+	if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE)
+		drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT);
+
+	mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */
+	buffer = (struct al_transaction *)page_address(mdev->md_io_page);
+
+	buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC);
+	buffer->tr_number = cpu_to_be32(mdev->al_tr_number);
+
+	n = lc_index_of(mdev->act_log, updated);
+
+	buffer->updates[0].pos = cpu_to_be32(n);
+	buffer->updates[0].extent = cpu_to_be32(new_enr);
+
+	xor_sum ^= new_enr;
+
+	mx = min_t(int, AL_EXTENTS_PT,
+		   mdev->act_log->nr_elements - mdev->al_tr_cycle);
+	for (i = 0; i < mx; i++) {
+		unsigned idx = mdev->al_tr_cycle + i;
+		extent_nr = lc_element_by_index(mdev->act_log, idx)->lc_number;
+		buffer->updates[i+1].pos = cpu_to_be32(idx);
+		buffer->updates[i+1].extent = cpu_to_be32(extent_nr);
+		xor_sum ^= extent_nr;
+	}
+	for (; i < AL_EXTENTS_PT; i++) {
+		buffer->updates[i+1].pos = __constant_cpu_to_be32(-1);
+		buffer->updates[i+1].extent = __constant_cpu_to_be32(LC_FREE);
+		xor_sum ^= LC_FREE;
+	}
+	mdev->al_tr_cycle += AL_EXTENTS_PT;
+	if (mdev->al_tr_cycle >= mdev->act_log->nr_elements)
+		mdev->al_tr_cycle = 0;
+
+	buffer->xor_sum = cpu_to_be32(xor_sum);
+
+	sector =  mdev->ldev->md.md_offset
+		+ mdev->ldev->md.al_offset + mdev->al_tr_pos;
+
+	if (!drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE))
+		drbd_chk_io_error(mdev, 1, TRUE);
+
+	if (++mdev->al_tr_pos >
+	    div_ceil(mdev->act_log->nr_elements, AL_EXTENTS_PT))
+		mdev->al_tr_pos = 0;
+
+	D_ASSERT(mdev->al_tr_pos < MD_AL_MAX_SIZE);
+	mdev->al_tr_number++;
+
+	mutex_unlock(&mdev->md_io_mutex);
+
+	complete(&((struct update_al_work *)w)->event);
+	put_ldev(mdev);
+
+	return 1;
+}
+
+/**
+ * drbd_al_read_tr() - Read a single transaction from the on disk activity log
+ * @mdev:	DRBD device.
+ * @bdev:	Block device to read form.
+ * @b:		pointer to an al_transaction.
+ * @index:	On disk slot of the transaction to read.
+ *
+ * Returns -1 on IO error, 0 on checksum error and 1 upon success.
+ */
+static int drbd_al_read_tr(struct drbd_conf *mdev,
+			   struct drbd_backing_dev *bdev,
+			   struct al_transaction *b,
+			   int index)
+{
+	sector_t sector;
+	int rv, i;
+	u32 xor_sum = 0;
+
+	sector = bdev->md.md_offset + bdev->md.al_offset + index;
+
+	/* Dont process error normally,
+	 * as this is done before disk is attached! */
+	if (!drbd_md_sync_page_io(mdev, bdev, sector, READ))
+		return -1;
+
+	rv = (be32_to_cpu(b->magic) == DRBD_MAGIC);
+
+	for (i = 0; i < AL_EXTENTS_PT + 1; i++)
+		xor_sum ^= be32_to_cpu(b->updates[i].extent);
+	rv &= (xor_sum == be32_to_cpu(b->xor_sum));
+
+	return rv;
+}
+
+/**
+ * drbd_al_read_log() - Restores the activity log from its on disk representation.
+ * @mdev:	DRBD device.
+ * @bdev:	Block device to read form.
+ *
+ * Returns 1 on success, returns 0 when reading the log failed due to IO errors.
+ */
+int drbd_al_read_log(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
+{
+	struct al_transaction *buffer;
+	int i;
+	int rv;
+	int mx;
+	int active_extents = 0;
+	int transactions = 0;
+	int found_valid = 0;
+	int from = 0;
+	int to = 0;
+	u32 from_tnr = 0;
+	u32 to_tnr = 0;
+	u32 cnr;
+
+	mx = div_ceil(mdev->act_log->nr_elements, AL_EXTENTS_PT);
+
+	/* lock out all other meta data io for now,
+	 * and make sure the page is mapped.
+	 */
+	mutex_lock(&mdev->md_io_mutex);
+	buffer = page_address(mdev->md_io_page);
+
+	/* Find the valid transaction in the log */
+	for (i = 0; i <= mx; i++) {
+		rv = drbd_al_read_tr(mdev, bdev, buffer, i);
+		if (rv == 0)
+			continue;
+		if (rv == -1) {
+			mutex_unlock(&mdev->md_io_mutex);
+			return 0;
+		}
+		cnr = be32_to_cpu(buffer->tr_number);
+
+		if (++found_valid == 1) {
+			from = i;
+			to = i;
+			from_tnr = cnr;
+			to_tnr = cnr;
+			continue;
+		}
+		if ((int)cnr - (int)from_tnr < 0) {
+			D_ASSERT(from_tnr - cnr + i - from == mx+1);
+			from = i;
+			from_tnr = cnr;
+		}
+		if ((int)cnr - (int)to_tnr > 0) {
+			D_ASSERT(cnr - to_tnr == i - to);
+			to = i;
+			to_tnr = cnr;
+		}
+	}
+
+	if (!found_valid) {
+		dev_warn(DEV, "No usable activity log found.\n");
+		mutex_unlock(&mdev->md_io_mutex);
+		return 1;
+	}
+
+	/* Read the valid transactions.
+	 * dev_info(DEV, "Reading from %d to %d.\n",from,to); */
+	i = from;
+	while (1) {
+		int j, pos;
+		unsigned int extent_nr;
+		unsigned int trn;
+
+		rv = drbd_al_read_tr(mdev, bdev, buffer, i);
+		ERR_IF(rv == 0) goto cancel;
+		if (rv == -1) {
+			mutex_unlock(&mdev->md_io_mutex);
+			return 0;
+		}
+
+		trn = be32_to_cpu(buffer->tr_number);
+
+		spin_lock_irq(&mdev->al_lock);
+
+		/* This loop runs backwards because in the cyclic
+		   elements there might be an old version of the
+		   updated element (in slot 0). So the element in slot 0
+		   can overwrite old versions. */
+		for (j = AL_EXTENTS_PT; j >= 0; j--) {
+			pos = be32_to_cpu(buffer->updates[j].pos);
+			extent_nr = be32_to_cpu(buffer->updates[j].extent);
+
+			if (extent_nr == LC_FREE)
+				continue;
+
+			lc_set(mdev->act_log, extent_nr, pos);
+			active_extents++;
+		}
+		spin_unlock_irq(&mdev->al_lock);
+
+		transactions++;
+
+cancel:
+		if (i == to)
+			break;
+		i++;
+		if (i > mx)
+			i = 0;
+	}
+
+	mdev->al_tr_number = to_tnr+1;
+	mdev->al_tr_pos = to;
+	if (++mdev->al_tr_pos >
+	    div_ceil(mdev->act_log->nr_elements, AL_EXTENTS_PT))
+		mdev->al_tr_pos = 0;
+
+	/* ok, we are done with it */
+	mutex_unlock(&mdev->md_io_mutex);
+
+	dev_info(DEV, "Found %d transactions (%d active extents) in activity log.\n",
+	     transactions, active_extents);
+
+	return 1;
+}
+
+static void atodb_endio(struct bio *bio, int error)
+{
+	struct drbd_atodb_wait *wc = bio->bi_private;
+	struct drbd_conf *mdev = wc->mdev;
+	struct page *page;
+	int uptodate = bio_flagged(bio, BIO_UPTODATE);
+
+	/* strange behavior of some lower level drivers...
+	 * fail the request by clearing the uptodate flag,
+	 * but do not return any error?! */
+	if (!error && !uptodate)
+		error = -EIO;
+
+	drbd_chk_io_error(mdev, error, TRUE);
+	if (error && wc->error == 0)
+		wc->error = error;
+
+	if (atomic_dec_and_test(&wc->count))
+		complete(&wc->io_done);
+
+	page = bio->bi_io_vec[0].bv_page;
+	put_page(page);
+	bio_put(bio);
+	mdev->bm_writ_cnt++;
+	put_ldev(mdev);
+}
+
+#define S2W(s)	((s)<<(BM_EXT_SHIFT-BM_BLOCK_SHIFT-LN2_BPL))
+/* activity log to on disk bitmap -- prepare bio unless that sector
+ * is already covered by previously prepared bios */
+static int atodb_prepare_unless_covered(struct drbd_conf *mdev,
+					struct bio **bios,
+					unsigned int enr,
+					struct drbd_atodb_wait *wc) __must_hold(local)
+{
+	struct bio *bio;
+	struct page *page;
+	sector_t on_disk_sector = enr + mdev->ldev->md.md_offset
+				      + mdev->ldev->md.bm_offset;
+	unsigned int page_offset = PAGE_SIZE;
+	int offset;
+	int i = 0;
+	int err = -ENOMEM;
+
+	/* Check if that enr is already covered by an already created bio.
+	 * Caution, bios[] is not NULL terminated,
+	 * but only initialized to all NULL.
+	 * For completely scattered activity log,
+	 * the last invocation iterates over all bios,
+	 * and finds the last NULL entry.
+	 */
+	while ((bio = bios[i])) {
+		if (bio->bi_sector == on_disk_sector)
+			return 0;
+		i++;
+	}
+	/* bios[i] == NULL, the next not yet used slot */
+
+	/* GFP_KERNEL, we are not in the write-out path */
+	bio = bio_alloc(GFP_KERNEL, 1);
+	if (bio == NULL)
+		return -ENOMEM;
+
+	if (i > 0) {
+		const struct bio_vec *prev_bv = bios[i-1]->bi_io_vec;
+		page_offset = prev_bv->bv_offset + prev_bv->bv_len;
+		page = prev_bv->bv_page;
+	}
+	if (page_offset == PAGE_SIZE) {
+		page = alloc_page(__GFP_HIGHMEM);
+		if (page == NULL)
+			goto out_bio_put;
+		page_offset = 0;
+	} else {
+		get_page(page);
+	}
+
+	offset = S2W(enr);
+	drbd_bm_get_lel(mdev, offset,
+			min_t(size_t, S2W(1), drbd_bm_words(mdev) - offset),
+			kmap(page) + page_offset);
+	kunmap(page);
+
+	bio->bi_private = wc;
+	bio->bi_end_io = atodb_endio;
+	bio->bi_bdev = mdev->ldev->md_bdev;
+	bio->bi_sector = on_disk_sector;
+
+	if (bio_add_page(bio, page, MD_SECTOR_SIZE, page_offset) != MD_SECTOR_SIZE)
+		goto out_put_page;
+
+	atomic_inc(&wc->count);
+	/* we already know that we may do this...
+	 * get_ldev_if_state(mdev,D_ATTACHING);
+	 * just get the extra reference, so that the local_cnt reflects
+	 * the number of pending IO requests DRBD at its backing device.
+	 */
+	atomic_inc(&mdev->local_cnt);
+
+	bios[i] = bio;
+
+	return 0;
+
+out_put_page:
+	err = -EINVAL;
+	put_page(page);
+out_bio_put:
+	bio_put(bio);
+	return err;
+}
+
+/**
+ * drbd_al_to_on_disk_bm() -  * Writes bitmap parts covered by active AL extents
+ * @mdev:	DRBD device.
+ *
+ * Called when we detach (unconfigure) local storage,
+ * or when we go from R_PRIMARY to R_SECONDARY role.
+ */
+void drbd_al_to_on_disk_bm(struct drbd_conf *mdev)
+{
+	int i, nr_elements;
+	unsigned int enr;
+	struct bio **bios;
+	struct drbd_atodb_wait wc;
+
+	ERR_IF (!get_ldev_if_state(mdev, D_ATTACHING))
+		return; /* sorry, I don't have any act_log etc... */
+
+	wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
+
+	nr_elements = mdev->act_log->nr_elements;
+
+	/* GFP_KERNEL, we are not in anyone's write-out path */
+	bios = kzalloc(sizeof(struct bio *) * nr_elements, GFP_KERNEL);
+	if (!bios)
+		goto submit_one_by_one;
+
+	atomic_set(&wc.count, 0);
+	init_completion(&wc.io_done);
+	wc.mdev = mdev;
+	wc.error = 0;
+
+	for (i = 0; i < nr_elements; i++) {
+		enr = lc_element_by_index(mdev->act_log, i)->lc_number;
+		if (enr == LC_FREE)
+			continue;
+		/* next statement also does atomic_inc wc.count and local_cnt */
+		if (atodb_prepare_unless_covered(mdev, bios,
+						enr/AL_EXT_PER_BM_SECT,
+						&wc))
+			goto free_bios_submit_one_by_one;
+	}
+
+	/* unnecessary optimization? */
+	lc_unlock(mdev->act_log);
+	wake_up(&mdev->al_wait);
+
+	/* all prepared, submit them */
+	for (i = 0; i < nr_elements; i++) {
+		if (bios[i] == NULL)
+			break;
+		if (FAULT_ACTIVE(mdev, DRBD_FAULT_MD_WR)) {
+			bios[i]->bi_rw = WRITE;
+			bio_endio(bios[i], -EIO);
+		} else {
+			submit_bio(WRITE, bios[i]);
+		}
+	}
+
+	drbd_blk_run_queue(bdev_get_queue(mdev->ldev->md_bdev));
+
+	/* always (try to) flush bitmap to stable storage */
+	drbd_md_flush(mdev);
+
+	/* In case we did not submit a single IO do not wait for
+	 * them to complete. ( Because we would wait forever here. )
+	 *
+	 * In case we had IOs and they are already complete, there
+	 * is not point in waiting anyways.
+	 * Therefore this if () ... */
+	if (atomic_read(&wc.count))
+		wait_for_completion(&wc.io_done);
+
+	put_ldev(mdev);
+
+	kfree(bios);
+	return;
+
+ free_bios_submit_one_by_one:
+	/* free everything by calling the endio callback directly. */
+	for (i = 0; i < nr_elements && bios[i]; i++)
+		bio_endio(bios[i], 0);
+
+	kfree(bios);
+
+ submit_one_by_one:
+	dev_warn(DEV, "Using the slow drbd_al_to_on_disk_bm()\n");
+
+	for (i = 0; i < mdev->act_log->nr_elements; i++) {
+		enr = lc_element_by_index(mdev->act_log, i)->lc_number;
+		if (enr == LC_FREE)
+			continue;
+		/* Really slow: if we have al-extents 16..19 active,
+		 * sector 4 will be written four times! Synchronous! */
+		drbd_bm_write_sect(mdev, enr/AL_EXT_PER_BM_SECT);
+	}
+
+	lc_unlock(mdev->act_log);
+	wake_up(&mdev->al_wait);
+	put_ldev(mdev);
+}
+
+/**
+ * drbd_al_apply_to_bm() - Sets the bitmap to diry(1) where covered ba active AL extents
+ * @mdev:	DRBD device.
+ */
+void drbd_al_apply_to_bm(struct drbd_conf *mdev)
+{
+	unsigned int enr;
+	unsigned long add = 0;
+	char ppb[10];
+	int i;
+
+	wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
+
+	for (i = 0; i < mdev->act_log->nr_elements; i++) {
+		enr = lc_element_by_index(mdev->act_log, i)->lc_number;
+		if (enr == LC_FREE)
+			continue;
+		add += drbd_bm_ALe_set_all(mdev, enr);
+	}
+
+	lc_unlock(mdev->act_log);
+	wake_up(&mdev->al_wait);
+
+	dev_info(DEV, "Marked additional %s as out-of-sync based on AL.\n",
+	     ppsize(ppb, Bit2KB(add)));
+}
+
+static int _try_lc_del(struct drbd_conf *mdev, struct lc_element *al_ext)
+{
+	int rv;
+
+	spin_lock_irq(&mdev->al_lock);
+	rv = (al_ext->refcnt == 0);
+	if (likely(rv))
+		lc_del(mdev->act_log, al_ext);
+	spin_unlock_irq(&mdev->al_lock);
+
+	return rv;
+}
+
+/**
+ * drbd_al_shrink() - Removes all active extents form the activity log
+ * @mdev:	DRBD device.
+ *
+ * Removes all active extents form the activity log, waiting until
+ * the reference count of each entry dropped to 0 first, of course.
+ *
+ * You need to lock mdev->act_log with lc_try_lock() / lc_unlock()
+ */
+void drbd_al_shrink(struct drbd_conf *mdev)
+{
+	struct lc_element *al_ext;
+	int i;
+
+	D_ASSERT(test_bit(__LC_DIRTY, &mdev->act_log->flags));
+
+	for (i = 0; i < mdev->act_log->nr_elements; i++) {
+		al_ext = lc_element_by_index(mdev->act_log, i);
+		if (al_ext->lc_number == LC_FREE)
+			continue;
+		wait_event(mdev->al_wait, _try_lc_del(mdev, al_ext));
+	}
+
+	wake_up(&mdev->al_wait);
+}
+
+static int w_update_odbm(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	struct update_odbm_work *udw = container_of(w, struct update_odbm_work, w);
+
+	if (!get_ldev(mdev)) {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_warn(DEV, "Can not update on disk bitmap, local IO disabled.\n");
+		kfree(udw);
+		return 1;
+	}
+
+	drbd_bm_write_sect(mdev, udw->enr);
+	put_ldev(mdev);
+
+	kfree(udw);
+
+	if (drbd_bm_total_weight(mdev) <= mdev->rs_failed) {
+		switch (mdev->state.conn) {
+		case C_SYNC_SOURCE:  case C_SYNC_TARGET:
+		case C_PAUSED_SYNC_S: case C_PAUSED_SYNC_T:
+			drbd_resync_finished(mdev);
+		default:
+			/* nothing to do */
+			break;
+		}
+	}
+	drbd_bcast_sync_progress(mdev);
+
+	return 1;
+}
+
+
+/* ATTENTION. The AL's extents are 4MB each, while the extents in the
+ * resync LRU-cache are 16MB each.
+ * The caller of this function has to hold an get_ldev() reference.
+ *
+ * TODO will be obsoleted once we have a caching lru of the on disk bitmap
+ */
+static void drbd_try_clear_on_disk_bm(struct drbd_conf *mdev, sector_t sector,
+				      int count, int success)
+{
+	struct lc_element *e;
+	struct update_odbm_work *udw;
+
+	unsigned int enr;
+
+	D_ASSERT(atomic_read(&mdev->local_cnt));
+
+	/* I simply assume that a sector/size pair never crosses
+	 * a 16 MB extent border. (Currently this is true...) */
+	enr = BM_SECT_TO_EXT(sector);
+
+	e = lc_get(mdev->resync, enr);
+	if (e) {
+		struct bm_extent *ext = lc_entry(e, struct bm_extent, lce);
+		if (ext->lce.lc_number == enr) {
+			if (success)
+				ext->rs_left -= count;
+			else
+				ext->rs_failed += count;
+			if (ext->rs_left < ext->rs_failed) {
+				dev_err(DEV, "BAD! sector=%llus enr=%u rs_left=%d "
+				    "rs_failed=%d count=%d\n",
+				     (unsigned long long)sector,
+				     ext->lce.lc_number, ext->rs_left,
+				     ext->rs_failed, count);
+				dump_stack();
+
+				lc_put(mdev->resync, &ext->lce);
+				drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+				return;
+			}
+		} else {
+			/* Normally this element should be in the cache,
+			 * since drbd_rs_begin_io() pulled it already in.
+			 *
+			 * But maybe an application write finished, and we set
+			 * something outside the resync lru_cache in sync.
+			 */
+			int rs_left = drbd_bm_e_weight(mdev, enr);
+			if (ext->flags != 0) {
+				dev_warn(DEV, "changing resync lce: %d[%u;%02lx]"
+				     " -> %d[%u;00]\n",
+				     ext->lce.lc_number, ext->rs_left,
+				     ext->flags, enr, rs_left);
+				ext->flags = 0;
+			}
+			if (ext->rs_failed) {
+				dev_warn(DEV, "Kicking resync_lru element enr=%u "
+				     "out with rs_failed=%d\n",
+				     ext->lce.lc_number, ext->rs_failed);
+				set_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags);
+			}
+			ext->rs_left = rs_left;
+			ext->rs_failed = success ? 0 : count;
+			lc_changed(mdev->resync, &ext->lce);
+		}
+		lc_put(mdev->resync, &ext->lce);
+		/* no race, we are within the al_lock! */
+
+		if (ext->rs_left == ext->rs_failed) {
+			ext->rs_failed = 0;
+
+			udw = kmalloc(sizeof(*udw), GFP_ATOMIC);
+			if (udw) {
+				udw->enr = ext->lce.lc_number;
+				udw->w.cb = w_update_odbm;
+				drbd_queue_work_front(&mdev->data.work, &udw->w);
+			} else {
+				dev_warn(DEV, "Could not kmalloc an udw\n");
+				set_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags);
+			}
+		}
+	} else {
+		dev_err(DEV, "lc_get() failed! locked=%d/%d flags=%lu\n",
+		    mdev->resync_locked,
+		    mdev->resync->nr_elements,
+		    mdev->resync->flags);
+	}
+}
+
+/* clear the bit corresponding to the piece of storage in question:
+ * size byte of data starting from sector.  Only clear a bits of the affected
+ * one ore more _aligned_ BM_BLOCK_SIZE blocks.
+ *
+ * called by worker on C_SYNC_TARGET and receiver on SyncSource.
+ *
+ */
+void __drbd_set_in_sync(struct drbd_conf *mdev, sector_t sector, int size,
+		       const char *file, const unsigned int line)
+{
+	/* Is called from worker and receiver context _only_ */
+	unsigned long sbnr, ebnr, lbnr;
+	unsigned long count = 0;
+	sector_t esector, nr_sectors;
+	int wake_up = 0;
+	unsigned long flags;
+
+	if (size <= 0 || (size & 0x1ff) != 0 || size > DRBD_MAX_SEGMENT_SIZE) {
+		dev_err(DEV, "drbd_set_in_sync: sector=%llus size=%d nonsense!\n",
+				(unsigned long long)sector, size);
+		return;
+	}
+	nr_sectors = drbd_get_capacity(mdev->this_bdev);
+	esector = sector + (size >> 9) - 1;
+
+	ERR_IF(sector >= nr_sectors) return;
+	ERR_IF(esector >= nr_sectors) esector = (nr_sectors-1);
+
+	lbnr = BM_SECT_TO_BIT(nr_sectors-1);
+
+	/* we clear it (in sync).
+	 * round up start sector, round down end sector.  we make sure we only
+	 * clear full, aligned, BM_BLOCK_SIZE (4K) blocks */
+	if (unlikely(esector < BM_SECT_PER_BIT-1))
+		return;
+	if (unlikely(esector == (nr_sectors-1)))
+		ebnr = lbnr;
+	else
+		ebnr = BM_SECT_TO_BIT(esector - (BM_SECT_PER_BIT-1));
+	sbnr = BM_SECT_TO_BIT(sector + BM_SECT_PER_BIT-1);
+
+	if (sbnr > ebnr)
+		return;
+
+	/*
+	 * ok, (capacity & 7) != 0 sometimes, but who cares...
+	 * we count rs_{total,left} in bits, not sectors.
+	 */
+	spin_lock_irqsave(&mdev->al_lock, flags);
+	count = drbd_bm_clear_bits(mdev, sbnr, ebnr);
+	if (count) {
+		/* we need the lock for drbd_try_clear_on_disk_bm */
+		if (jiffies - mdev->rs_mark_time > HZ*10) {
+			/* should be rolling marks,
+			 * but we estimate only anyways. */
+			if (mdev->rs_mark_left != drbd_bm_total_weight(mdev) &&
+			    mdev->state.conn != C_PAUSED_SYNC_T &&
+			    mdev->state.conn != C_PAUSED_SYNC_S) {
+				mdev->rs_mark_time = jiffies;
+				mdev->rs_mark_left = drbd_bm_total_weight(mdev);
+			}
+		}
+		if (get_ldev(mdev)) {
+			drbd_try_clear_on_disk_bm(mdev, sector, count, TRUE);
+			put_ldev(mdev);
+		}
+		/* just wake_up unconditional now, various lc_chaged(),
+		 * lc_put() in drbd_try_clear_on_disk_bm(). */
+		wake_up = 1;
+	}
+	spin_unlock_irqrestore(&mdev->al_lock, flags);
+	if (wake_up)
+		wake_up(&mdev->al_wait);
+}
+
+/*
+ * this is intended to set one request worth of data out of sync.
+ * affects at least 1 bit,
+ * and at most 1+DRBD_MAX_SEGMENT_SIZE/BM_BLOCK_SIZE bits.
+ *
+ * called by tl_clear and drbd_send_dblock (==drbd_make_request).
+ * so this can be _any_ process.
+ */
+void __drbd_set_out_of_sync(struct drbd_conf *mdev, sector_t sector, int size,
+			    const char *file, const unsigned int line)
+{
+	unsigned long sbnr, ebnr, lbnr, flags;
+	sector_t esector, nr_sectors;
+	unsigned int enr, count;
+	struct lc_element *e;
+
+	if (size <= 0 || (size & 0x1ff) != 0 || size > DRBD_MAX_SEGMENT_SIZE) {
+		dev_err(DEV, "sector: %llus, size: %d\n",
+			(unsigned long long)sector, size);
+		return;
+	}
+
+	if (!get_ldev(mdev))
+		return; /* no disk, no metadata, no bitmap to set bits in */
+
+	nr_sectors = drbd_get_capacity(mdev->this_bdev);
+	esector = sector + (size >> 9) - 1;
+
+	ERR_IF(sector >= nr_sectors)
+		goto out;
+	ERR_IF(esector >= nr_sectors)
+		esector = (nr_sectors-1);
+
+	lbnr = BM_SECT_TO_BIT(nr_sectors-1);
+
+	/* we set it out of sync,
+	 * we do not need to round anything here */
+	sbnr = BM_SECT_TO_BIT(sector);
+	ebnr = BM_SECT_TO_BIT(esector);
+
+	/* ok, (capacity & 7) != 0 sometimes, but who cares...
+	 * we count rs_{total,left} in bits, not sectors.  */
+	spin_lock_irqsave(&mdev->al_lock, flags);
+	count = drbd_bm_set_bits(mdev, sbnr, ebnr);
+
+	enr = BM_SECT_TO_EXT(sector);
+	e = lc_find(mdev->resync, enr);
+	if (e)
+		lc_entry(e, struct bm_extent, lce)->rs_left += count;
+	spin_unlock_irqrestore(&mdev->al_lock, flags);
+
+out:
+	put_ldev(mdev);
+}
+
+static
+struct bm_extent *_bme_get(struct drbd_conf *mdev, unsigned int enr)
+{
+	struct lc_element *e;
+	struct bm_extent *bm_ext;
+	int wakeup = 0;
+	unsigned long rs_flags;
+
+	spin_lock_irq(&mdev->al_lock);
+	if (mdev->resync_locked > mdev->resync->nr_elements/2) {
+		spin_unlock_irq(&mdev->al_lock);
+		return NULL;
+	}
+	e = lc_get(mdev->resync, enr);
+	bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+	if (bm_ext) {
+		if (bm_ext->lce.lc_number != enr) {
+			bm_ext->rs_left = drbd_bm_e_weight(mdev, enr);
+			bm_ext->rs_failed = 0;
+			lc_changed(mdev->resync, &bm_ext->lce);
+			wakeup = 1;
+		}
+		if (bm_ext->lce.refcnt == 1)
+			mdev->resync_locked++;
+		set_bit(BME_NO_WRITES, &bm_ext->flags);
+	}
+	rs_flags = mdev->resync->flags;
+	spin_unlock_irq(&mdev->al_lock);
+	if (wakeup)
+		wake_up(&mdev->al_wait);
+
+	if (!bm_ext) {
+		if (rs_flags & LC_STARVING)
+			dev_warn(DEV, "Have to wait for element"
+			     " (resync LRU too small?)\n");
+		BUG_ON(rs_flags & LC_DIRTY);
+	}
+
+	return bm_ext;
+}
+
+static int _is_in_al(struct drbd_conf *mdev, unsigned int enr)
+{
+	struct lc_element *al_ext;
+	int rv = 0;
+
+	spin_lock_irq(&mdev->al_lock);
+	if (unlikely(enr == mdev->act_log->new_number))
+		rv = 1;
+	else {
+		al_ext = lc_find(mdev->act_log, enr);
+		if (al_ext) {
+			if (al_ext->refcnt)
+				rv = 1;
+		}
+	}
+	spin_unlock_irq(&mdev->al_lock);
+
+	/*
+	if (unlikely(rv)) {
+		dev_info(DEV, "Delaying sync read until app's write is done\n");
+	}
+	*/
+	return rv;
+}
+
+/**
+ * drbd_rs_begin_io() - Gets an extent in the resync LRU cache and sets it to BME_LOCKED
+ * @mdev:	DRBD device.
+ * @sector:	The sector number.
+ *
+ * This functions sleeps on al_wait. Returns 1 on success, 0 if interrupted.
+ */
+int drbd_rs_begin_io(struct drbd_conf *mdev, sector_t sector)
+{
+	unsigned int enr = BM_SECT_TO_EXT(sector);
+	struct bm_extent *bm_ext;
+	int i, sig;
+
+	sig = wait_event_interruptible(mdev->al_wait,
+			(bm_ext = _bme_get(mdev, enr)));
+	if (sig)
+		return 0;
+
+	if (test_bit(BME_LOCKED, &bm_ext->flags))
+		return 1;
+
+	for (i = 0; i < AL_EXT_PER_BM_SECT; i++) {
+		sig = wait_event_interruptible(mdev->al_wait,
+				!_is_in_al(mdev, enr * AL_EXT_PER_BM_SECT + i));
+		if (sig) {
+			spin_lock_irq(&mdev->al_lock);
+			if (lc_put(mdev->resync, &bm_ext->lce) == 0) {
+				clear_bit(BME_NO_WRITES, &bm_ext->flags);
+				mdev->resync_locked--;
+				wake_up(&mdev->al_wait);
+			}
+			spin_unlock_irq(&mdev->al_lock);
+			return 0;
+		}
+	}
+
+	set_bit(BME_LOCKED, &bm_ext->flags);
+
+	return 1;
+}
+
+/**
+ * drbd_try_rs_begin_io() - Gets an extent in the resync LRU cache, does not sleep
+ * @mdev:	DRBD device.
+ * @sector:	The sector number.
+ *
+ * Gets an extent in the resync LRU cache, sets it to BME_NO_WRITES, then
+ * tries to set it to BME_LOCKED. Returns 0 upon success, and -EAGAIN
+ * if there is still application IO going on in this area.
+ */
+int drbd_try_rs_begin_io(struct drbd_conf *mdev, sector_t sector)
+{
+	unsigned int enr = BM_SECT_TO_EXT(sector);
+	const unsigned int al_enr = enr*AL_EXT_PER_BM_SECT;
+	struct lc_element *e;
+	struct bm_extent *bm_ext;
+	int i;
+
+	spin_lock_irq(&mdev->al_lock);
+	if (mdev->resync_wenr != LC_FREE && mdev->resync_wenr != enr) {
+		/* in case you have very heavy scattered io, it may
+		 * stall the syncer undefined if we give up the ref count
+		 * when we try again and requeue.
+		 *
+		 * if we don't give up the refcount, but the next time
+		 * we are scheduled this extent has been "synced" by new
+		 * application writes, we'd miss the lc_put on the
+		 * extent we keep the refcount on.
+		 * so we remembered which extent we had to try again, and
+		 * if the next requested one is something else, we do
+		 * the lc_put here...
+		 * we also have to wake_up
+		 */
+		e = lc_find(mdev->resync, mdev->resync_wenr);
+		bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+		if (bm_ext) {
+			D_ASSERT(!test_bit(BME_LOCKED, &bm_ext->flags));
+			D_ASSERT(test_bit(BME_NO_WRITES, &bm_ext->flags));
+			clear_bit(BME_NO_WRITES, &bm_ext->flags);
+			mdev->resync_wenr = LC_FREE;
+			if (lc_put(mdev->resync, &bm_ext->lce) == 0)
+				mdev->resync_locked--;
+			wake_up(&mdev->al_wait);
+		} else {
+			dev_alert(DEV, "LOGIC BUG\n");
+		}
+	}
+	/* TRY. */
+	e = lc_try_get(mdev->resync, enr);
+	bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+	if (bm_ext) {
+		if (test_bit(BME_LOCKED, &bm_ext->flags))
+			goto proceed;
+		if (!test_and_set_bit(BME_NO_WRITES, &bm_ext->flags)) {
+			mdev->resync_locked++;
+		} else {
+			/* we did set the BME_NO_WRITES,
+			 * but then could not set BME_LOCKED,
+			 * so we tried again.
+			 * drop the extra reference. */
+			bm_ext->lce.refcnt--;
+			D_ASSERT(bm_ext->lce.refcnt > 0);
+		}
+		goto check_al;
+	} else {
+		/* do we rather want to try later? */
+		if (mdev->resync_locked > mdev->resync->nr_elements-3)
+			goto try_again;
+		/* Do or do not. There is no try. -- Yoda */
+		e = lc_get(mdev->resync, enr);
+		bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+		if (!bm_ext) {
+			const unsigned long rs_flags = mdev->resync->flags;
+			if (rs_flags & LC_STARVING)
+				dev_warn(DEV, "Have to wait for element"
+				     " (resync LRU too small?)\n");
+			BUG_ON(rs_flags & LC_DIRTY);
+			goto try_again;
+		}
+		if (bm_ext->lce.lc_number != enr) {
+			bm_ext->rs_left = drbd_bm_e_weight(mdev, enr);
+			bm_ext->rs_failed = 0;
+			lc_changed(mdev->resync, &bm_ext->lce);
+			wake_up(&mdev->al_wait);
+			D_ASSERT(test_bit(BME_LOCKED, &bm_ext->flags) == 0);
+		}
+		set_bit(BME_NO_WRITES, &bm_ext->flags);
+		D_ASSERT(bm_ext->lce.refcnt == 1);
+		mdev->resync_locked++;
+		goto check_al;
+	}
+check_al:
+	for (i = 0; i < AL_EXT_PER_BM_SECT; i++) {
+		if (unlikely(al_enr+i == mdev->act_log->new_number))
+			goto try_again;
+		if (lc_is_used(mdev->act_log, al_enr+i))
+			goto try_again;
+	}
+	set_bit(BME_LOCKED, &bm_ext->flags);
+proceed:
+	mdev->resync_wenr = LC_FREE;
+	spin_unlock_irq(&mdev->al_lock);
+	return 0;
+
+try_again:
+	if (bm_ext)
+		mdev->resync_wenr = enr;
+	spin_unlock_irq(&mdev->al_lock);
+	return -EAGAIN;
+}
+
+void drbd_rs_complete_io(struct drbd_conf *mdev, sector_t sector)
+{
+	unsigned int enr = BM_SECT_TO_EXT(sector);
+	struct lc_element *e;
+	struct bm_extent *bm_ext;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mdev->al_lock, flags);
+	e = lc_find(mdev->resync, enr);
+	bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+	if (!bm_ext) {
+		spin_unlock_irqrestore(&mdev->al_lock, flags);
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "drbd_rs_complete_io() called, but extent not found\n");
+		return;
+	}
+
+	if (bm_ext->lce.refcnt == 0) {
+		spin_unlock_irqrestore(&mdev->al_lock, flags);
+		dev_err(DEV, "drbd_rs_complete_io(,%llu [=%u]) called, "
+		    "but refcnt is 0!?\n",
+		    (unsigned long long)sector, enr);
+		return;
+	}
+
+	if (lc_put(mdev->resync, &bm_ext->lce) == 0) {
+		clear_bit(BME_LOCKED, &bm_ext->flags);
+		clear_bit(BME_NO_WRITES, &bm_ext->flags);
+		mdev->resync_locked--;
+		wake_up(&mdev->al_wait);
+	}
+
+	spin_unlock_irqrestore(&mdev->al_lock, flags);
+}
+
+/**
+ * drbd_rs_cancel_all() - Removes all extents from the resync LRU (even BME_LOCKED)
+ * @mdev:	DRBD device.
+ */
+void drbd_rs_cancel_all(struct drbd_conf *mdev)
+{
+	spin_lock_irq(&mdev->al_lock);
+
+	if (get_ldev_if_state(mdev, D_FAILED)) { /* Makes sure ->resync is there. */
+		lc_reset(mdev->resync);
+		put_ldev(mdev);
+	}
+	mdev->resync_locked = 0;
+	mdev->resync_wenr = LC_FREE;
+	spin_unlock_irq(&mdev->al_lock);
+	wake_up(&mdev->al_wait);
+}
+
+/**
+ * drbd_rs_del_all() - Gracefully remove all extents from the resync LRU
+ * @mdev:	DRBD device.
+ *
+ * Returns 0 upon success, -EAGAIN if at least one reference count was
+ * not zero.
+ */
+int drbd_rs_del_all(struct drbd_conf *mdev)
+{
+	struct lc_element *e;
+	struct bm_extent *bm_ext;
+	int i;
+
+	spin_lock_irq(&mdev->al_lock);
+
+	if (get_ldev_if_state(mdev, D_FAILED)) {
+		/* ok, ->resync is there. */
+		for (i = 0; i < mdev->resync->nr_elements; i++) {
+			e = lc_element_by_index(mdev->resync, i);
+			bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+			if (bm_ext->lce.lc_number == LC_FREE)
+				continue;
+			if (bm_ext->lce.lc_number == mdev->resync_wenr) {
+				dev_info(DEV, "dropping %u in drbd_rs_del_all, apparently"
+				     " got 'synced' by application io\n",
+				     mdev->resync_wenr);
+				D_ASSERT(!test_bit(BME_LOCKED, &bm_ext->flags));
+				D_ASSERT(test_bit(BME_NO_WRITES, &bm_ext->flags));
+				clear_bit(BME_NO_WRITES, &bm_ext->flags);
+				mdev->resync_wenr = LC_FREE;
+				lc_put(mdev->resync, &bm_ext->lce);
+			}
+			if (bm_ext->lce.refcnt != 0) {
+				dev_info(DEV, "Retrying drbd_rs_del_all() later. "
+				     "refcnt=%d\n", bm_ext->lce.refcnt);
+				put_ldev(mdev);
+				spin_unlock_irq(&mdev->al_lock);
+				return -EAGAIN;
+			}
+			D_ASSERT(!test_bit(BME_LOCKED, &bm_ext->flags));
+			D_ASSERT(!test_bit(BME_NO_WRITES, &bm_ext->flags));
+			lc_del(mdev->resync, &bm_ext->lce);
+		}
+		D_ASSERT(mdev->resync->used == 0);
+		put_ldev(mdev);
+	}
+	spin_unlock_irq(&mdev->al_lock);
+
+	return 0;
+}
+
+/**
+ * drbd_rs_failed_io() - Record information on a failure to resync the specified blocks
+ * @mdev:	DRBD device.
+ * @sector:	The sector number.
+ * @size:	Size of failed IO operation, in byte.
+ */
+void drbd_rs_failed_io(struct drbd_conf *mdev, sector_t sector, int size)
+{
+	/* Is called from worker and receiver context _only_ */
+	unsigned long sbnr, ebnr, lbnr;
+	unsigned long count;
+	sector_t esector, nr_sectors;
+	int wake_up = 0;
+
+	if (size <= 0 || (size & 0x1ff) != 0 || size > DRBD_MAX_SEGMENT_SIZE) {
+		dev_err(DEV, "drbd_rs_failed_io: sector=%llus size=%d nonsense!\n",
+				(unsigned long long)sector, size);
+		return;
+	}
+	nr_sectors = drbd_get_capacity(mdev->this_bdev);
+	esector = sector + (size >> 9) - 1;
+
+	ERR_IF(sector >= nr_sectors) return;
+	ERR_IF(esector >= nr_sectors) esector = (nr_sectors-1);
+
+	lbnr = BM_SECT_TO_BIT(nr_sectors-1);
+
+	/*
+	 * round up start sector, round down end sector.  we make sure we only
+	 * handle full, aligned, BM_BLOCK_SIZE (4K) blocks */
+	if (unlikely(esector < BM_SECT_PER_BIT-1))
+		return;
+	if (unlikely(esector == (nr_sectors-1)))
+		ebnr = lbnr;
+	else
+		ebnr = BM_SECT_TO_BIT(esector - (BM_SECT_PER_BIT-1));
+	sbnr = BM_SECT_TO_BIT(sector + BM_SECT_PER_BIT-1);
+
+	if (sbnr > ebnr)
+		return;
+
+	/*
+	 * ok, (capacity & 7) != 0 sometimes, but who cares...
+	 * we count rs_{total,left} in bits, not sectors.
+	 */
+	spin_lock_irq(&mdev->al_lock);
+	count = drbd_bm_count_bits(mdev, sbnr, ebnr);
+	if (count) {
+		mdev->rs_failed += count;
+
+		if (get_ldev(mdev)) {
+			drbd_try_clear_on_disk_bm(mdev, sector, count, FALSE);
+			put_ldev(mdev);
+		}
+
+		/* just wake_up unconditional now, various lc_chaged(),
+		 * lc_put() in drbd_try_clear_on_disk_bm(). */
+		wake_up = 1;
+	}
+	spin_unlock_irq(&mdev->al_lock);
+	if (wake_up)
+		wake_up(&mdev->al_wait);
+}
diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c
new file mode 100644
index 0000000..b61057e
--- /dev/null
+++ b/drivers/block/drbd/drbd_bitmap.c
@@ -0,0 +1,1327 @@
+/*
+   drbd_bitmap.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2004-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2004-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2004-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/drbd.h>
+#include <asm/kmap_types.h>
+#include "drbd_int.h"
+
+/* OPAQUE outside this file!
+ * interface defined in drbd_int.h
+
+ * convention:
+ * function name drbd_bm_... => used elsewhere, "public".
+ * function name      bm_... => internal to implementation, "private".
+
+ * Note that since find_first_bit returns int, at the current granularity of
+ * the bitmap (4KB per byte), this implementation "only" supports up to
+ * 1<<(32+12) == 16 TB...
+ */
+
+/*
+ * NOTE
+ *  Access to the *bm_pages is protected by bm_lock.
+ *  It is safe to read the other members within the lock.
+ *
+ *  drbd_bm_set_bits is called from bio_endio callbacks,
+ *  We may be called with irq already disabled,
+ *  so we need spin_lock_irqsave().
+ *  And we need the kmap_atomic.
+ */
+struct drbd_bitmap {
+	struct page **bm_pages;
+	spinlock_t bm_lock;
+	/* WARNING unsigned long bm_*:
+	 * 32bit number of bit offset is just enough for 512 MB bitmap.
+	 * it will blow up if we make the bitmap bigger...
+	 * not that it makes much sense to have a bitmap that large,
+	 * rather change the granularity to 16k or 64k or something.
+	 * (that implies other problems, however...)
+	 */
+	unsigned long bm_set;       /* nr of set bits; THINK maybe atomic_t? */
+	unsigned long bm_bits;
+	size_t   bm_words;
+	size_t   bm_number_of_pages;
+	sector_t bm_dev_capacity;
+	struct semaphore bm_change; /* serializes resize operations */
+
+	atomic_t bm_async_io;
+	wait_queue_head_t bm_io_wait;
+
+	unsigned long  bm_flags;
+
+	/* debugging aid, in case we are still racy somewhere */
+	char          *bm_why;
+	struct task_struct *bm_task;
+};
+
+/* definition of bits in bm_flags */
+#define BM_LOCKED       0
+#define BM_MD_IO_ERROR  1
+#define BM_P_VMALLOCED  2
+
+static int bm_is_locked(struct drbd_bitmap *b)
+{
+	return test_bit(BM_LOCKED, &b->bm_flags);
+}
+
+#define bm_print_lock_info(m) __bm_print_lock_info(m, __func__)
+static void __bm_print_lock_info(struct drbd_conf *mdev, const char *func)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	if (!__ratelimit(&drbd_ratelimit_state))
+		return;
+	dev_err(DEV, "FIXME %s in %s, bitmap locked for '%s' by %s\n",
+	    current == mdev->receiver.task ? "receiver" :
+	    current == mdev->asender.task  ? "asender"  :
+	    current == mdev->worker.task   ? "worker"   : current->comm,
+	    func, b->bm_why ?: "?",
+	    b->bm_task == mdev->receiver.task ? "receiver" :
+	    b->bm_task == mdev->asender.task  ? "asender"  :
+	    b->bm_task == mdev->worker.task   ? "worker"   : "?");
+}
+
+void drbd_bm_lock(struct drbd_conf *mdev, char *why)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	int trylock_failed;
+
+	if (!b) {
+		dev_err(DEV, "FIXME no bitmap in drbd_bm_lock!?\n");
+		return;
+	}
+
+	trylock_failed = down_trylock(&b->bm_change);
+
+	if (trylock_failed) {
+		dev_warn(DEV, "%s going to '%s' but bitmap already locked for '%s' by %s\n",
+		    current == mdev->receiver.task ? "receiver" :
+		    current == mdev->asender.task  ? "asender"  :
+		    current == mdev->worker.task   ? "worker"   : current->comm,
+		    why, b->bm_why ?: "?",
+		    b->bm_task == mdev->receiver.task ? "receiver" :
+		    b->bm_task == mdev->asender.task  ? "asender"  :
+		    b->bm_task == mdev->worker.task   ? "worker"   : "?");
+		down(&b->bm_change);
+	}
+	if (__test_and_set_bit(BM_LOCKED, &b->bm_flags))
+		dev_err(DEV, "FIXME bitmap already locked in bm_lock\n");
+
+	b->bm_why  = why;
+	b->bm_task = current;
+}
+
+void drbd_bm_unlock(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	if (!b) {
+		dev_err(DEV, "FIXME no bitmap in drbd_bm_unlock!?\n");
+		return;
+	}
+
+	if (!__test_and_clear_bit(BM_LOCKED, &mdev->bitmap->bm_flags))
+		dev_err(DEV, "FIXME bitmap not locked in bm_unlock\n");
+
+	b->bm_why  = NULL;
+	b->bm_task = NULL;
+	up(&b->bm_change);
+}
+
+/* word offset to long pointer */
+static unsigned long *__bm_map_paddr(struct drbd_bitmap *b, unsigned long offset, const enum km_type km)
+{
+	struct page *page;
+	unsigned long page_nr;
+
+	/* page_nr = (word*sizeof(long)) >> PAGE_SHIFT; */
+	page_nr = offset >> (PAGE_SHIFT - LN2_BPL + 3);
+	BUG_ON(page_nr >= b->bm_number_of_pages);
+	page = b->bm_pages[page_nr];
+
+	return (unsigned long *) kmap_atomic(page, km);
+}
+
+static unsigned long * bm_map_paddr(struct drbd_bitmap *b, unsigned long offset)
+{
+	return __bm_map_paddr(b, offset, KM_IRQ1);
+}
+
+static void __bm_unmap(unsigned long *p_addr, const enum km_type km)
+{
+	kunmap_atomic(p_addr, km);
+};
+
+static void bm_unmap(unsigned long *p_addr)
+{
+	return __bm_unmap(p_addr, KM_IRQ1);
+}
+
+/* long word offset of _bitmap_ sector */
+#define S2W(s)	((s)<<(BM_EXT_SHIFT-BM_BLOCK_SHIFT-LN2_BPL))
+/* word offset from start of bitmap to word number _in_page_
+ * modulo longs per page
+#define MLPP(X) ((X) % (PAGE_SIZE/sizeof(long))
+ hm, well, Philipp thinks gcc might not optimze the % into & (... - 1)
+ so do it explicitly:
+ */
+#define MLPP(X) ((X) & ((PAGE_SIZE/sizeof(long))-1))
+
+/* Long words per page */
+#define LWPP (PAGE_SIZE/sizeof(long))
+
+/*
+ * actually most functions herein should take a struct drbd_bitmap*, not a
+ * struct drbd_conf*, but for the debug macros I like to have the mdev around
+ * to be able to report device specific.
+ */
+
+static void bm_free_pages(struct page **pages, unsigned long number)
+{
+	unsigned long i;
+	if (!pages)
+		return;
+
+	for (i = 0; i < number; i++) {
+		if (!pages[i]) {
+			printk(KERN_ALERT "drbd: bm_free_pages tried to free "
+					  "a NULL pointer; i=%lu n=%lu\n",
+					  i, number);
+			continue;
+		}
+		__free_page(pages[i]);
+		pages[i] = NULL;
+	}
+}
+
+static void bm_vk_free(void *ptr, int v)
+{
+	if (v)
+		vfree(ptr);
+	else
+		kfree(ptr);
+}
+
+/*
+ * "have" and "want" are NUMBER OF PAGES.
+ */
+static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want)
+{
+	struct page **old_pages = b->bm_pages;
+	struct page **new_pages, *page;
+	unsigned int i, bytes, vmalloced = 0;
+	unsigned long have = b->bm_number_of_pages;
+
+	BUG_ON(have == 0 && old_pages != NULL);
+	BUG_ON(have != 0 && old_pages == NULL);
+
+	if (have == want)
+		return old_pages;
+
+	/* Trying kmalloc first, falling back to vmalloc.
+	 * GFP_KERNEL is ok, as this is done when a lower level disk is
+	 * "attached" to the drbd.  Context is receiver thread or cqueue
+	 * thread.  As we have no disk yet, we are not in the IO path,
+	 * not even the IO path of the peer. */
+	bytes = sizeof(struct page *)*want;
+	new_pages = kmalloc(bytes, GFP_KERNEL);
+	if (!new_pages) {
+		new_pages = vmalloc(bytes);
+		if (!new_pages)
+			return NULL;
+		vmalloced = 1;
+	}
+
+	memset(new_pages, 0, bytes);
+	if (want >= have) {
+		for (i = 0; i < have; i++)
+			new_pages[i] = old_pages[i];
+		for (; i < want; i++) {
+			page = alloc_page(GFP_HIGHUSER);
+			if (!page) {
+				bm_free_pages(new_pages + have, i - have);
+				bm_vk_free(new_pages, vmalloced);
+				return NULL;
+			}
+			new_pages[i] = page;
+		}
+	} else {
+		for (i = 0; i < want; i++)
+			new_pages[i] = old_pages[i];
+		/* NOT HERE, we are outside the spinlock!
+		bm_free_pages(old_pages + want, have - want);
+		*/
+	}
+
+	if (vmalloced)
+		set_bit(BM_P_VMALLOCED, &b->bm_flags);
+	else
+		clear_bit(BM_P_VMALLOCED, &b->bm_flags);
+
+	return new_pages;
+}
+
+/*
+ * called on driver init only. TODO call when a device is created.
+ * allocates the drbd_bitmap, and stores it in mdev->bitmap.
+ */
+int drbd_bm_init(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	WARN_ON(b != NULL);
+	b = kzalloc(sizeof(struct drbd_bitmap), GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+	spin_lock_init(&b->bm_lock);
+	init_MUTEX(&b->bm_change);
+	init_waitqueue_head(&b->bm_io_wait);
+
+	mdev->bitmap = b;
+
+	return 0;
+}
+
+sector_t drbd_bm_capacity(struct drbd_conf *mdev)
+{
+	ERR_IF(!mdev->bitmap) return 0;
+	return mdev->bitmap->bm_dev_capacity;
+}
+
+/* called on driver unload. TODO: call when a device is destroyed.
+ */
+void drbd_bm_cleanup(struct drbd_conf *mdev)
+{
+	ERR_IF (!mdev->bitmap) return;
+	bm_free_pages(mdev->bitmap->bm_pages, mdev->bitmap->bm_number_of_pages);
+	bm_vk_free(mdev->bitmap->bm_pages, test_bit(BM_P_VMALLOCED, &mdev->bitmap->bm_flags));
+	kfree(mdev->bitmap);
+	mdev->bitmap = NULL;
+}
+
+/*
+ * since (b->bm_bits % BITS_PER_LONG) != 0,
+ * this masks out the remaining bits.
+ * Returns the number of bits cleared.
+ */
+static int bm_clear_surplus(struct drbd_bitmap *b)
+{
+	const unsigned long mask = (1UL << (b->bm_bits & (BITS_PER_LONG-1))) - 1;
+	size_t w = b->bm_bits >> LN2_BPL;
+	int cleared = 0;
+	unsigned long *p_addr, *bm;
+
+	p_addr = bm_map_paddr(b, w);
+	bm = p_addr + MLPP(w);
+	if (w < b->bm_words) {
+		cleared = hweight_long(*bm & ~mask);
+		*bm &= mask;
+		w++; bm++;
+	}
+
+	if (w < b->bm_words) {
+		cleared += hweight_long(*bm);
+		*bm = 0;
+	}
+	bm_unmap(p_addr);
+	return cleared;
+}
+
+static void bm_set_surplus(struct drbd_bitmap *b)
+{
+	const unsigned long mask = (1UL << (b->bm_bits & (BITS_PER_LONG-1))) - 1;
+	size_t w = b->bm_bits >> LN2_BPL;
+	unsigned long *p_addr, *bm;
+
+	p_addr = bm_map_paddr(b, w);
+	bm = p_addr + MLPP(w);
+	if (w < b->bm_words) {
+		*bm |= ~mask;
+		bm++; w++;
+	}
+
+	if (w < b->bm_words) {
+		*bm = ~(0UL);
+	}
+	bm_unmap(p_addr);
+}
+
+static unsigned long __bm_count_bits(struct drbd_bitmap *b, const int swap_endian)
+{
+	unsigned long *p_addr, *bm, offset = 0;
+	unsigned long bits = 0;
+	unsigned long i, do_now;
+
+	while (offset < b->bm_words) {
+		i = do_now = min_t(size_t, b->bm_words-offset, LWPP);
+		p_addr = __bm_map_paddr(b, offset, KM_USER0);
+		bm = p_addr + MLPP(offset);
+		while (i--) {
+#ifndef __LITTLE_ENDIAN
+			if (swap_endian)
+				*bm = lel_to_cpu(*bm);
+#endif
+			bits += hweight_long(*bm++);
+		}
+		__bm_unmap(p_addr, KM_USER0);
+		offset += do_now;
+		cond_resched();
+	}
+
+	return bits;
+}
+
+static unsigned long bm_count_bits(struct drbd_bitmap *b)
+{
+	return __bm_count_bits(b, 0);
+}
+
+static unsigned long bm_count_bits_swap_endian(struct drbd_bitmap *b)
+{
+	return __bm_count_bits(b, 1);
+}
+
+/* offset and len in long words.*/
+static void bm_memset(struct drbd_bitmap *b, size_t offset, int c, size_t len)
+{
+	unsigned long *p_addr, *bm;
+	size_t do_now, end;
+
+#define BM_SECTORS_PER_BIT (BM_BLOCK_SIZE/512)
+
+	end = offset + len;
+
+	if (end > b->bm_words) {
+		printk(KERN_ALERT "drbd: bm_memset end > bm_words\n");
+		return;
+	}
+
+	while (offset < end) {
+		do_now = min_t(size_t, ALIGN(offset + 1, LWPP), end) - offset;
+		p_addr = bm_map_paddr(b, offset);
+		bm = p_addr + MLPP(offset);
+		if (bm+do_now > p_addr + LWPP) {
+			printk(KERN_ALERT "drbd: BUG BUG BUG! p_addr:%p bm:%p do_now:%d\n",
+			       p_addr, bm, (int)do_now);
+			break; /* breaks to after catch_oob_access_end() only! */
+		}
+		memset(bm, c, do_now * sizeof(long));
+		bm_unmap(p_addr);
+		offset += do_now;
+	}
+}
+
+/*
+ * make sure the bitmap has enough room for the attached storage,
+ * if necessary, resize.
+ * called whenever we may have changed the device size.
+ * returns -ENOMEM if we could not allocate enough memory, 0 on success.
+ * In case this is actually a resize, we copy the old bitmap into the new one.
+ * Otherwise, the bitmap is initialized to all bits set.
+ */
+int drbd_bm_resize(struct drbd_conf *mdev, sector_t capacity)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long bits, words, owords, obits, *p_addr, *bm;
+	unsigned long want, have, onpages; /* number of pages */
+	struct page **npages, **opages = NULL;
+	int err = 0, growing;
+	int opages_vmalloced;
+
+	ERR_IF(!b) return -ENOMEM;
+
+	drbd_bm_lock(mdev, "resize");
+
+	dev_info(DEV, "drbd_bm_resize called with capacity == %llu\n",
+			(unsigned long long)capacity);
+
+	if (capacity == b->bm_dev_capacity)
+		goto out;
+
+	opages_vmalloced = test_bit(BM_P_VMALLOCED, &b->bm_flags);
+
+	if (capacity == 0) {
+		spin_lock_irq(&b->bm_lock);
+		opages = b->bm_pages;
+		onpages = b->bm_number_of_pages;
+		owords = b->bm_words;
+		b->bm_pages = NULL;
+		b->bm_number_of_pages =
+		b->bm_set   =
+		b->bm_bits  =
+		b->bm_words =
+		b->bm_dev_capacity = 0;
+		spin_unlock_irq(&b->bm_lock);
+		bm_free_pages(opages, onpages);
+		bm_vk_free(opages, opages_vmalloced);
+		goto out;
+	}
+	bits  = BM_SECT_TO_BIT(ALIGN(capacity, BM_SECT_PER_BIT));
+
+	/* if we would use
+	   words = ALIGN(bits,BITS_PER_LONG) >> LN2_BPL;
+	   a 32bit host could present the wrong number of words
+	   to a 64bit host.
+	*/
+	words = ALIGN(bits, 64) >> LN2_BPL;
+
+	if (get_ldev(mdev)) {
+		D_ASSERT((u64)bits <= (((u64)mdev->ldev->md.md_size_sect-MD_BM_OFFSET) << 12));
+		put_ldev(mdev);
+	}
+
+	/* one extra long to catch off by one errors */
+	want = ALIGN((words+1)*sizeof(long), PAGE_SIZE) >> PAGE_SHIFT;
+	have = b->bm_number_of_pages;
+	if (want == have) {
+		D_ASSERT(b->bm_pages != NULL);
+		npages = b->bm_pages;
+	} else {
+		if (FAULT_ACTIVE(mdev, DRBD_FAULT_BM_ALLOC))
+			npages = NULL;
+		else
+			npages = bm_realloc_pages(b, want);
+	}
+
+	if (!npages) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	spin_lock_irq(&b->bm_lock);
+	opages = b->bm_pages;
+	owords = b->bm_words;
+	obits  = b->bm_bits;
+
+	growing = bits > obits;
+	if (opages)
+		bm_set_surplus(b);
+
+	b->bm_pages = npages;
+	b->bm_number_of_pages = want;
+	b->bm_bits  = bits;
+	b->bm_words = words;
+	b->bm_dev_capacity = capacity;
+
+	if (growing) {
+		bm_memset(b, owords, 0xff, words-owords);
+		b->bm_set += bits - obits;
+	}
+
+	if (want < have) {
+		/* implicit: (opages != NULL) && (opages != npages) */
+		bm_free_pages(opages + want, have - want);
+	}
+
+	p_addr = bm_map_paddr(b, words);
+	bm = p_addr + MLPP(words);
+	*bm = DRBD_MAGIC;
+	bm_unmap(p_addr);
+
+	(void)bm_clear_surplus(b);
+
+	spin_unlock_irq(&b->bm_lock);
+	if (opages != npages)
+		bm_vk_free(opages, opages_vmalloced);
+	if (!growing)
+		b->bm_set = bm_count_bits(b);
+	dev_info(DEV, "resync bitmap: bits=%lu words=%lu\n", bits, words);
+
+ out:
+	drbd_bm_unlock(mdev);
+	return err;
+}
+
+/* inherently racy:
+ * if not protected by other means, return value may be out of date when
+ * leaving this function...
+ * we still need to lock it, since it is important that this returns
+ * bm_set == 0 precisely.
+ *
+ * maybe bm_set should be atomic_t ?
+ */
+static unsigned long _drbd_bm_total_weight(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long s;
+	unsigned long flags;
+
+	ERR_IF(!b) return 0;
+	ERR_IF(!b->bm_pages) return 0;
+
+	spin_lock_irqsave(&b->bm_lock, flags);
+	s = b->bm_set;
+	spin_unlock_irqrestore(&b->bm_lock, flags);
+
+	return s;
+}
+
+unsigned long drbd_bm_total_weight(struct drbd_conf *mdev)
+{
+	unsigned long s;
+	/* if I don't have a disk, I don't know about out-of-sync status */
+	if (!get_ldev_if_state(mdev, D_NEGOTIATING))
+		return 0;
+	s = _drbd_bm_total_weight(mdev);
+	put_ldev(mdev);
+	return s;
+}
+
+size_t drbd_bm_words(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	ERR_IF(!b) return 0;
+	ERR_IF(!b->bm_pages) return 0;
+
+	return b->bm_words;
+}
+
+unsigned long drbd_bm_bits(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	ERR_IF(!b) return 0;
+
+	return b->bm_bits;
+}
+
+/* merge number words from buffer into the bitmap starting at offset.
+ * buffer[i] is expected to be little endian unsigned long.
+ * bitmap must be locked by drbd_bm_lock.
+ * currently only used from receive_bitmap.
+ */
+void drbd_bm_merge_lel(struct drbd_conf *mdev, size_t offset, size_t number,
+			unsigned long *buffer)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long *p_addr, *bm;
+	unsigned long word, bits;
+	size_t end, do_now;
+
+	end = offset + number;
+
+	ERR_IF(!b) return;
+	ERR_IF(!b->bm_pages) return;
+	if (number == 0)
+		return;
+	WARN_ON(offset >= b->bm_words);
+	WARN_ON(end    >  b->bm_words);
+
+	spin_lock_irq(&b->bm_lock);
+	while (offset < end) {
+		do_now = min_t(size_t, ALIGN(offset+1, LWPP), end) - offset;
+		p_addr = bm_map_paddr(b, offset);
+		bm = p_addr + MLPP(offset);
+		offset += do_now;
+		while (do_now--) {
+			bits = hweight_long(*bm);
+			word = *bm | lel_to_cpu(*buffer++);
+			*bm++ = word;
+			b->bm_set += hweight_long(word) - bits;
+		}
+		bm_unmap(p_addr);
+	}
+	/* with 32bit <-> 64bit cross-platform connect
+	 * this is only correct for current usage,
+	 * where we _know_ that we are 64 bit aligned,
+	 * and know that this function is used in this way, too...
+	 */
+	if (end == b->bm_words)
+		b->bm_set -= bm_clear_surplus(b);
+
+	spin_unlock_irq(&b->bm_lock);
+}
+
+/* copy number words from the bitmap starting at offset into the buffer.
+ * buffer[i] will be little endian unsigned long.
+ */
+void drbd_bm_get_lel(struct drbd_conf *mdev, size_t offset, size_t number,
+		     unsigned long *buffer)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long *p_addr, *bm;
+	size_t end, do_now;
+
+	end = offset + number;
+
+	ERR_IF(!b) return;
+	ERR_IF(!b->bm_pages) return;
+
+	spin_lock_irq(&b->bm_lock);
+	if ((offset >= b->bm_words) ||
+	    (end    >  b->bm_words) ||
+	    (number <= 0))
+		dev_err(DEV, "offset=%lu number=%lu bm_words=%lu\n",
+			(unsigned long)	offset,
+			(unsigned long)	number,
+			(unsigned long) b->bm_words);
+	else {
+		while (offset < end) {
+			do_now = min_t(size_t, ALIGN(offset+1, LWPP), end) - offset;
+			p_addr = bm_map_paddr(b, offset);
+			bm = p_addr + MLPP(offset);
+			offset += do_now;
+			while (do_now--)
+				*buffer++ = cpu_to_lel(*bm++);
+			bm_unmap(p_addr);
+		}
+	}
+	spin_unlock_irq(&b->bm_lock);
+}
+
+/* set all bits in the bitmap */
+void drbd_bm_set_all(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	ERR_IF(!b) return;
+	ERR_IF(!b->bm_pages) return;
+
+	spin_lock_irq(&b->bm_lock);
+	bm_memset(b, 0, 0xff, b->bm_words);
+	(void)bm_clear_surplus(b);
+	b->bm_set = b->bm_bits;
+	spin_unlock_irq(&b->bm_lock);
+}
+
+/* clear all bits in the bitmap */
+void drbd_bm_clear_all(struct drbd_conf *mdev)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	ERR_IF(!b) return;
+	ERR_IF(!b->bm_pages) return;
+
+	spin_lock_irq(&b->bm_lock);
+	bm_memset(b, 0, 0, b->bm_words);
+	b->bm_set = 0;
+	spin_unlock_irq(&b->bm_lock);
+}
+
+static void bm_async_io_complete(struct bio *bio, int error)
+{
+	struct drbd_bitmap *b = bio->bi_private;
+	int uptodate = bio_flagged(bio, BIO_UPTODATE);
+
+
+	/* strange behavior of some lower level drivers...
+	 * fail the request by clearing the uptodate flag,
+	 * but do not return any error?!
+	 * do we want to WARN() on this? */
+	if (!error && !uptodate)
+		error = -EIO;
+
+	if (error) {
+		/* doh. what now?
+		 * for now, set all bits, and flag MD_IO_ERROR */
+		__set_bit(BM_MD_IO_ERROR, &b->bm_flags);
+	}
+	if (atomic_dec_and_test(&b->bm_async_io))
+		wake_up(&b->bm_io_wait);
+
+	bio_put(bio);
+}
+
+static void bm_page_io_async(struct drbd_conf *mdev, struct drbd_bitmap *b, int page_nr, int rw) __must_hold(local)
+{
+	/* we are process context. we always get a bio */
+	struct bio *bio = bio_alloc(GFP_KERNEL, 1);
+	unsigned int len;
+	sector_t on_disk_sector =
+		mdev->ldev->md.md_offset + mdev->ldev->md.bm_offset;
+	on_disk_sector += ((sector_t)page_nr) << (PAGE_SHIFT-9);
+
+	/* this might happen with very small
+	 * flexible external meta data device */
+	len = min_t(unsigned int, PAGE_SIZE,
+		(drbd_md_last_sector(mdev->ldev) - on_disk_sector + 1)<<9);
+
+	bio->bi_bdev = mdev->ldev->md_bdev;
+	bio->bi_sector = on_disk_sector;
+	bio_add_page(bio, b->bm_pages[page_nr], len, 0);
+	bio->bi_private = b;
+	bio->bi_end_io = bm_async_io_complete;
+
+	if (FAULT_ACTIVE(mdev, (rw & WRITE) ? DRBD_FAULT_MD_WR : DRBD_FAULT_MD_RD)) {
+		bio->bi_rw |= rw;
+		bio_endio(bio, -EIO);
+	} else {
+		submit_bio(rw, bio);
+	}
+}
+
+# if defined(__LITTLE_ENDIAN)
+	/* nothing to do, on disk == in memory */
+# define bm_cpu_to_lel(x) ((void)0)
+# else
+void bm_cpu_to_lel(struct drbd_bitmap *b)
+{
+	/* need to cpu_to_lel all the pages ...
+	 * this may be optimized by using
+	 * cpu_to_lel(-1) == -1 and cpu_to_lel(0) == 0;
+	 * the following is still not optimal, but better than nothing */
+	unsigned int i;
+	unsigned long *p_addr, *bm;
+	if (b->bm_set == 0) {
+		/* no page at all; avoid swap if all is 0 */
+		i = b->bm_number_of_pages;
+	} else if (b->bm_set == b->bm_bits) {
+		/* only the last page */
+		i = b->bm_number_of_pages - 1;
+	} else {
+		/* all pages */
+		i = 0;
+	}
+	for (; i < b->bm_number_of_pages; i++) {
+		p_addr = kmap_atomic(b->bm_pages[i], KM_USER0);
+		for (bm = p_addr; bm < p_addr + PAGE_SIZE/sizeof(long); bm++)
+			*bm = cpu_to_lel(*bm);
+		kunmap_atomic(p_addr, KM_USER0);
+	}
+}
+# endif
+/* lel_to_cpu == cpu_to_lel */
+# define bm_lel_to_cpu(x) bm_cpu_to_lel(x)
+
+/*
+ * bm_rw: read/write the whole bitmap from/to its on disk location.
+ */
+static int bm_rw(struct drbd_conf *mdev, int rw) __must_hold(local)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	/* sector_t sector; */
+	int bm_words, num_pages, i;
+	unsigned long now;
+	char ppb[10];
+	int err = 0;
+
+	WARN_ON(!bm_is_locked(b));
+
+	/* no spinlock here, the drbd_bm_lock should be enough! */
+
+	bm_words  = drbd_bm_words(mdev);
+	num_pages = (bm_words*sizeof(long) + PAGE_SIZE-1) >> PAGE_SHIFT;
+
+	/* on disk bitmap is little endian */
+	if (rw == WRITE)
+		bm_cpu_to_lel(b);
+
+	now = jiffies;
+	atomic_set(&b->bm_async_io, num_pages);
+	__clear_bit(BM_MD_IO_ERROR, &b->bm_flags);
+
+	/* let the layers below us try to merge these bios... */
+	for (i = 0; i < num_pages; i++)
+		bm_page_io_async(mdev, b, i, rw);
+
+	drbd_blk_run_queue(bdev_get_queue(mdev->ldev->md_bdev));
+	wait_event(b->bm_io_wait, atomic_read(&b->bm_async_io) == 0);
+
+	if (test_bit(BM_MD_IO_ERROR, &b->bm_flags)) {
+		dev_alert(DEV, "we had at least one MD IO ERROR during bitmap IO\n");
+		drbd_chk_io_error(mdev, 1, TRUE);
+		err = -EIO;
+	}
+
+	now = jiffies;
+	if (rw == WRITE) {
+		/* swap back endianness */
+		bm_lel_to_cpu(b);
+		/* flush bitmap to stable storage */
+		drbd_md_flush(mdev);
+	} else /* rw == READ */ {
+		/* just read, if necessary adjust endianness */
+		b->bm_set = bm_count_bits_swap_endian(b);
+		dev_info(DEV, "recounting of set bits took additional %lu jiffies\n",
+		     jiffies - now);
+	}
+	now = b->bm_set;
+
+	dev_info(DEV, "%s (%lu bits) marked out-of-sync by on disk bit-map.\n",
+	     ppsize(ppb, now << (BM_BLOCK_SHIFT-10)), now);
+
+	return err;
+}
+
+/**
+ * drbd_bm_read() - Read the whole bitmap from its on disk location.
+ * @mdev:	DRBD device.
+ */
+int drbd_bm_read(struct drbd_conf *mdev) __must_hold(local)
+{
+	return bm_rw(mdev, READ);
+}
+
+/**
+ * drbd_bm_write() - Write the whole bitmap to its on disk location.
+ * @mdev:	DRBD device.
+ */
+int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local)
+{
+	return bm_rw(mdev, WRITE);
+}
+
+/**
+ * drbd_bm_write_sect: Writes a 512 (MD_SECTOR_SIZE) byte piece of the bitmap
+ * @mdev:	DRBD device.
+ * @enr:	Extent number in the resync lru (happens to be sector offset)
+ *
+ * The BM_EXT_SIZE is on purpose exactly the amount of the bitmap covered
+ * by a single sector write. Therefore enr == sector offset from the
+ * start of the bitmap.
+ */
+int drbd_bm_write_sect(struct drbd_conf *mdev, unsigned long enr) __must_hold(local)
+{
+	sector_t on_disk_sector = enr + mdev->ldev->md.md_offset
+				      + mdev->ldev->md.bm_offset;
+	int bm_words, num_words, offset;
+	int err = 0;
+
+	mutex_lock(&mdev->md_io_mutex);
+	bm_words  = drbd_bm_words(mdev);
+	offset    = S2W(enr);	/* word offset into bitmap */
+	num_words = min(S2W(1), bm_words - offset);
+	if (num_words < S2W(1))
+		memset(page_address(mdev->md_io_page), 0, MD_SECTOR_SIZE);
+	drbd_bm_get_lel(mdev, offset, num_words,
+			page_address(mdev->md_io_page));
+	if (!drbd_md_sync_page_io(mdev, mdev->ldev, on_disk_sector, WRITE)) {
+		int i;
+		err = -EIO;
+		dev_err(DEV, "IO ERROR writing bitmap sector %lu "
+		    "(meta-disk sector %llus)\n",
+		    enr, (unsigned long long)on_disk_sector);
+		drbd_chk_io_error(mdev, 1, TRUE);
+		for (i = 0; i < AL_EXT_PER_BM_SECT; i++)
+			drbd_bm_ALe_set_all(mdev, enr*AL_EXT_PER_BM_SECT+i);
+	}
+	mdev->bm_writ_cnt++;
+	mutex_unlock(&mdev->md_io_mutex);
+	return err;
+}
+
+/* NOTE
+ * find_first_bit returns int, we return unsigned long.
+ * should not make much difference anyways, but ...
+ *
+ * this returns a bit number, NOT a sector!
+ */
+#define BPP_MASK ((1UL << (PAGE_SHIFT+3)) - 1)
+static unsigned long __bm_find_next(struct drbd_conf *mdev, unsigned long bm_fo,
+	const int find_zero_bit, const enum km_type km)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long i = -1UL;
+	unsigned long *p_addr;
+	unsigned long bit_offset; /* bit offset of the mapped page. */
+
+	if (bm_fo > b->bm_bits) {
+		dev_err(DEV, "bm_fo=%lu bm_bits=%lu\n", bm_fo, b->bm_bits);
+	} else {
+		while (bm_fo < b->bm_bits) {
+			unsigned long offset;
+			bit_offset = bm_fo & ~BPP_MASK; /* bit offset of the page */
+			offset = bit_offset >> LN2_BPL;    /* word offset of the page */
+			p_addr = __bm_map_paddr(b, offset, km);
+
+			if (find_zero_bit)
+				i = find_next_zero_bit(p_addr, PAGE_SIZE*8, bm_fo & BPP_MASK);
+			else
+				i = find_next_bit(p_addr, PAGE_SIZE*8, bm_fo & BPP_MASK);
+
+			__bm_unmap(p_addr, km);
+			if (i < PAGE_SIZE*8) {
+				i = bit_offset + i;
+				if (i >= b->bm_bits)
+					break;
+				goto found;
+			}
+			bm_fo = bit_offset + PAGE_SIZE*8;
+		}
+		i = -1UL;
+	}
+ found:
+	return i;
+}
+
+static unsigned long bm_find_next(struct drbd_conf *mdev,
+	unsigned long bm_fo, const int find_zero_bit)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long i = -1UL;
+
+	ERR_IF(!b) return i;
+	ERR_IF(!b->bm_pages) return i;
+
+	spin_lock_irq(&b->bm_lock);
+	if (bm_is_locked(b))
+		bm_print_lock_info(mdev);
+
+	i = __bm_find_next(mdev, bm_fo, find_zero_bit, KM_IRQ1);
+
+	spin_unlock_irq(&b->bm_lock);
+	return i;
+}
+
+unsigned long drbd_bm_find_next(struct drbd_conf *mdev, unsigned long bm_fo)
+{
+	return bm_find_next(mdev, bm_fo, 0);
+}
+
+#if 0
+/* not yet needed for anything. */
+unsigned long drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_fo)
+{
+	return bm_find_next(mdev, bm_fo, 1);
+}
+#endif
+
+/* does not spin_lock_irqsave.
+ * you must take drbd_bm_lock() first */
+unsigned long _drbd_bm_find_next(struct drbd_conf *mdev, unsigned long bm_fo)
+{
+	/* WARN_ON(!bm_is_locked(mdev)); */
+	return __bm_find_next(mdev, bm_fo, 0, KM_USER1);
+}
+
+unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_fo)
+{
+	/* WARN_ON(!bm_is_locked(mdev)); */
+	return __bm_find_next(mdev, bm_fo, 1, KM_USER1);
+}
+
+/* returns number of bits actually changed.
+ * for val != 0, we change 0 -> 1, return code positive
+ * for val == 0, we change 1 -> 0, return code negative
+ * wants bitnr, not sector.
+ * expected to be called for only a few bits (e - s about BITS_PER_LONG).
+ * Must hold bitmap lock already. */
+int __bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
+	unsigned long e, int val, const enum km_type km)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long *p_addr = NULL;
+	unsigned long bitnr;
+	unsigned long last_page_nr = -1UL;
+	int c = 0;
+
+	if (e >= b->bm_bits) {
+		dev_err(DEV, "ASSERT FAILED: bit_s=%lu bit_e=%lu bm_bits=%lu\n",
+				s, e, b->bm_bits);
+		e = b->bm_bits ? b->bm_bits -1 : 0;
+	}
+	for (bitnr = s; bitnr <= e; bitnr++) {
+		unsigned long offset = bitnr>>LN2_BPL;
+		unsigned long page_nr = offset >> (PAGE_SHIFT - LN2_BPL + 3);
+		if (page_nr != last_page_nr) {
+			if (p_addr)
+				__bm_unmap(p_addr, km);
+			p_addr = __bm_map_paddr(b, offset, km);
+			last_page_nr = page_nr;
+		}
+		if (val)
+			c += (0 == __test_and_set_bit(bitnr & BPP_MASK, p_addr));
+		else
+			c -= (0 != __test_and_clear_bit(bitnr & BPP_MASK, p_addr));
+	}
+	if (p_addr)
+		__bm_unmap(p_addr, km);
+	b->bm_set += c;
+	return c;
+}
+
+/* returns number of bits actually changed.
+ * for val != 0, we change 0 -> 1, return code positive
+ * for val == 0, we change 1 -> 0, return code negative
+ * wants bitnr, not sector */
+int bm_change_bits_to(struct drbd_conf *mdev, const unsigned long s,
+	const unsigned long e, int val)
+{
+	unsigned long flags;
+	struct drbd_bitmap *b = mdev->bitmap;
+	int c = 0;
+
+	ERR_IF(!b) return 1;
+	ERR_IF(!b->bm_pages) return 0;
+
+	spin_lock_irqsave(&b->bm_lock, flags);
+	if (bm_is_locked(b))
+		bm_print_lock_info(mdev);
+
+	c = __bm_change_bits_to(mdev, s, e, val, KM_IRQ1);
+
+	spin_unlock_irqrestore(&b->bm_lock, flags);
+	return c;
+}
+
+/* returns number of bits changed 0 -> 1 */
+int drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsigned long e)
+{
+	return bm_change_bits_to(mdev, s, e, 1);
+}
+
+/* returns number of bits changed 1 -> 0 */
+int drbd_bm_clear_bits(struct drbd_conf *mdev, const unsigned long s, const unsigned long e)
+{
+	return -bm_change_bits_to(mdev, s, e, 0);
+}
+
+/* sets all bits in full words,
+ * from first_word up to, but not including, last_word */
+static inline void bm_set_full_words_within_one_page(struct drbd_bitmap *b,
+		int page_nr, int first_word, int last_word)
+{
+	int i;
+	int bits;
+	unsigned long *paddr = kmap_atomic(b->bm_pages[page_nr], KM_USER0);
+	for (i = first_word; i < last_word; i++) {
+		bits = hweight_long(paddr[i]);
+		paddr[i] = ~0UL;
+		b->bm_set += BITS_PER_LONG - bits;
+	}
+	kunmap_atomic(paddr, KM_USER0);
+}
+
+/* Same thing as drbd_bm_set_bits, but without taking the spin_lock_irqsave.
+ * You must first drbd_bm_lock().
+ * Can be called to set the whole bitmap in one go.
+ * Sets bits from s to e _inclusive_. */
+void _drbd_bm_set_bits(struct drbd_conf *mdev, const unsigned long s, const unsigned long e)
+{
+	/* First set_bit from the first bit (s)
+	 * up to the next long boundary (sl),
+	 * then assign full words up to the last long boundary (el),
+	 * then set_bit up to and including the last bit (e).
+	 *
+	 * Do not use memset, because we must account for changes,
+	 * so we need to loop over the words with hweight() anyways.
+	 */
+	unsigned long sl = ALIGN(s,BITS_PER_LONG);
+	unsigned long el = (e+1) & ~((unsigned long)BITS_PER_LONG-1);
+	int first_page;
+	int last_page;
+	int page_nr;
+	int first_word;
+	int last_word;
+
+	if (e - s <= 3*BITS_PER_LONG) {
+		/* don't bother; el and sl may even be wrong. */
+		__bm_change_bits_to(mdev, s, e, 1, KM_USER0);
+		return;
+	}
+
+	/* difference is large enough that we can trust sl and el */
+
+	/* bits filling the current long */
+	if (sl)
+		__bm_change_bits_to(mdev, s, sl-1, 1, KM_USER0);
+
+	first_page = sl >> (3 + PAGE_SHIFT);
+	last_page = el >> (3 + PAGE_SHIFT);
+
+	/* MLPP: modulo longs per page */
+	/* LWPP: long words per page */
+	first_word = MLPP(sl >> LN2_BPL);
+	last_word = LWPP;
+
+	/* first and full pages, unless first page == last page */
+	for (page_nr = first_page; page_nr < last_page; page_nr++) {
+		bm_set_full_words_within_one_page(mdev->bitmap, page_nr, first_word, last_word);
+		cond_resched();
+		first_word = 0;
+	}
+
+	/* last page (respectively only page, for first page == last page) */
+	last_word = MLPP(el >> LN2_BPL);
+	bm_set_full_words_within_one_page(mdev->bitmap, last_page, first_word, last_word);
+
+	/* possibly trailing bits.
+	 * example: (e & 63) == 63, el will be e+1.
+	 * if that even was the very last bit,
+	 * it would trigger an assert in __bm_change_bits_to()
+	 */
+	if (el <= e)
+		__bm_change_bits_to(mdev, el, e, 1, KM_USER0);
+}
+
+/* returns bit state
+ * wants bitnr, NOT sector.
+ * inherently racy... area needs to be locked by means of {al,rs}_lru
+ *  1 ... bit set
+ *  0 ... bit not set
+ * -1 ... first out of bounds access, stop testing for bits!
+ */
+int drbd_bm_test_bit(struct drbd_conf *mdev, const unsigned long bitnr)
+{
+	unsigned long flags;
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long *p_addr;
+	int i;
+
+	ERR_IF(!b) return 0;
+	ERR_IF(!b->bm_pages) return 0;
+
+	spin_lock_irqsave(&b->bm_lock, flags);
+	if (bm_is_locked(b))
+		bm_print_lock_info(mdev);
+	if (bitnr < b->bm_bits) {
+		unsigned long offset = bitnr>>LN2_BPL;
+		p_addr = bm_map_paddr(b, offset);
+		i = test_bit(bitnr & BPP_MASK, p_addr) ? 1 : 0;
+		bm_unmap(p_addr);
+	} else if (bitnr == b->bm_bits) {
+		i = -1;
+	} else { /* (bitnr > b->bm_bits) */
+		dev_err(DEV, "bitnr=%lu > bm_bits=%lu\n", bitnr, b->bm_bits);
+		i = 0;
+	}
+
+	spin_unlock_irqrestore(&b->bm_lock, flags);
+	return i;
+}
+
+/* returns number of bits set in the range [s, e] */
+int drbd_bm_count_bits(struct drbd_conf *mdev, const unsigned long s, const unsigned long e)
+{
+	unsigned long flags;
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long *p_addr = NULL, page_nr = -1;
+	unsigned long bitnr;
+	int c = 0;
+	size_t w;
+
+	/* If this is called without a bitmap, that is a bug.  But just to be
+	 * robust in case we screwed up elsewhere, in that case pretend there
+	 * was one dirty bit in the requested area, so we won't try to do a
+	 * local read there (no bitmap probably implies no disk) */
+	ERR_IF(!b) return 1;
+	ERR_IF(!b->bm_pages) return 1;
+
+	spin_lock_irqsave(&b->bm_lock, flags);
+	if (bm_is_locked(b))
+		bm_print_lock_info(mdev);
+	for (bitnr = s; bitnr <= e; bitnr++) {
+		w = bitnr >> LN2_BPL;
+		if (page_nr != w >> (PAGE_SHIFT - LN2_BPL + 3)) {
+			page_nr = w >> (PAGE_SHIFT - LN2_BPL + 3);
+			if (p_addr)
+				bm_unmap(p_addr);
+			p_addr = bm_map_paddr(b, w);
+		}
+		ERR_IF (bitnr >= b->bm_bits) {
+			dev_err(DEV, "bitnr=%lu bm_bits=%lu\n", bitnr, b->bm_bits);
+		} else {
+			c += (0 != test_bit(bitnr - (page_nr << (PAGE_SHIFT+3)), p_addr));
+		}
+	}
+	if (p_addr)
+		bm_unmap(p_addr);
+	spin_unlock_irqrestore(&b->bm_lock, flags);
+	return c;
+}
+
+
+/* inherently racy...
+ * return value may be already out-of-date when this function returns.
+ * but the general usage is that this is only use during a cstate when bits are
+ * only cleared, not set, and typically only care for the case when the return
+ * value is zero, or we already "locked" this "bitmap extent" by other means.
+ *
+ * enr is bm-extent number, since we chose to name one sector (512 bytes)
+ * worth of the bitmap a "bitmap extent".
+ *
+ * TODO
+ * I think since we use it like a reference count, we should use the real
+ * reference count of some bitmap extent element from some lru instead...
+ *
+ */
+int drbd_bm_e_weight(struct drbd_conf *mdev, unsigned long enr)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	int count, s, e;
+	unsigned long flags;
+	unsigned long *p_addr, *bm;
+
+	ERR_IF(!b) return 0;
+	ERR_IF(!b->bm_pages) return 0;
+
+	spin_lock_irqsave(&b->bm_lock, flags);
+	if (bm_is_locked(b))
+		bm_print_lock_info(mdev);
+
+	s = S2W(enr);
+	e = min((size_t)S2W(enr+1), b->bm_words);
+	count = 0;
+	if (s < b->bm_words) {
+		int n = e-s;
+		p_addr = bm_map_paddr(b, s);
+		bm = p_addr + MLPP(s);
+		while (n--)
+			count += hweight_long(*bm++);
+		bm_unmap(p_addr);
+	} else {
+		dev_err(DEV, "start offset (%d) too large in drbd_bm_e_weight\n", s);
+	}
+	spin_unlock_irqrestore(&b->bm_lock, flags);
+	return count;
+}
+
+/* set all bits covered by the AL-extent al_enr */
+unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev, unsigned long al_enr)
+{
+	struct drbd_bitmap *b = mdev->bitmap;
+	unsigned long *p_addr, *bm;
+	unsigned long weight;
+	int count, s, e, i, do_now;
+	ERR_IF(!b) return 0;
+	ERR_IF(!b->bm_pages) return 0;
+
+	spin_lock_irq(&b->bm_lock);
+	if (bm_is_locked(b))
+		bm_print_lock_info(mdev);
+	weight = b->bm_set;
+
+	s = al_enr * BM_WORDS_PER_AL_EXT;
+	e = min_t(size_t, s + BM_WORDS_PER_AL_EXT, b->bm_words);
+	/* assert that s and e are on the same page */
+	D_ASSERT((e-1) >> (PAGE_SHIFT - LN2_BPL + 3)
+	      ==  s    >> (PAGE_SHIFT - LN2_BPL + 3));
+	count = 0;
+	if (s < b->bm_words) {
+		i = do_now = e-s;
+		p_addr = bm_map_paddr(b, s);
+		bm = p_addr + MLPP(s);
+		while (i--) {
+			count += hweight_long(*bm);
+			*bm = -1UL;
+			bm++;
+		}
+		bm_unmap(p_addr);
+		b->bm_set += do_now*BITS_PER_LONG - count;
+		if (e == b->bm_words)
+			b->bm_set -= bm_clear_surplus(b);
+	} else {
+		dev_err(DEV, "start offset (%d) too large in drbd_bm_ALe_set_all\n", s);
+	}
+	weight = b->bm_set - weight;
+	spin_unlock_irq(&b->bm_lock);
+	return weight;
+}
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
new file mode 100644
index 0000000..2312d78
--- /dev/null
+++ b/drivers/block/drbd/drbd_int.h
@@ -0,0 +1,2252 @@
+/*
+  drbd_int.h
+
+  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+  Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+  Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+  Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+  drbd is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2, or (at your option)
+  any later version.
+
+  drbd is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with drbd; see the file COPYING.  If not, write to
+  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#ifndef _DRBD_INT_H
+#define _DRBD_INT_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/list.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/crypto.h>
+#include <linux/ratelimit.h>
+#include <linux/tcp.h>
+#include <linux/mutex.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/genhd.h>
+#include <net/tcp.h>
+#include <linux/lru_cache.h>
+
+#ifdef __CHECKER__
+# define __protected_by(x)       __attribute__((require_context(x,1,999,"rdwr")))
+# define __protected_read_by(x)  __attribute__((require_context(x,1,999,"read")))
+# define __protected_write_by(x) __attribute__((require_context(x,1,999,"write")))
+# define __must_hold(x)       __attribute__((context(x,1,1), require_context(x,1,999,"call")))
+#else
+# define __protected_by(x)
+# define __protected_read_by(x)
+# define __protected_write_by(x)
+# define __must_hold(x)
+#endif
+
+#define __no_warn(lock, stmt) do { __acquire(lock); stmt; __release(lock); } while (0)
+
+/* module parameter, defined in drbd_main.c */
+extern unsigned int minor_count;
+extern int disable_sendpage;
+extern int allow_oos;
+extern unsigned int cn_idx;
+
+#ifdef CONFIG_DRBD_FAULT_INJECTION
+extern int enable_faults;
+extern int fault_rate;
+extern int fault_devs;
+#endif
+
+extern char usermode_helper[];
+
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* I don't remember why XCPU ...
+ * This is used to wake the asender,
+ * and to interrupt sending the sending task
+ * on disconnect.
+ */
+#define DRBD_SIG SIGXCPU
+
+/* This is used to stop/restart our threads.
+ * Cannot use SIGTERM nor SIGKILL, since these
+ * are sent out by init on runlevel changes
+ * I choose SIGHUP for now.
+ */
+#define DRBD_SIGKILL SIGHUP
+
+/* All EEs on the free list should have ID_VACANT (== 0)
+ * freshly allocated EEs get !ID_VACANT (== 1)
+ * so if it says "cannot dereference null pointer at adress 0x00000001",
+ * it is most likely one of these :( */
+
+#define ID_IN_SYNC      (4711ULL)
+#define ID_OUT_OF_SYNC  (4712ULL)
+
+#define ID_SYNCER (-1ULL)
+#define ID_VACANT 0
+#define is_syncer_block_id(id) ((id) == ID_SYNCER)
+
+struct drbd_conf;
+
+
+/* to shorten dev_warn(DEV, "msg"); and relatives statements */
+#define DEV (disk_to_dev(mdev->vdisk))
+
+#define D_ASSERT(exp)	if (!(exp)) \
+	 dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__)
+
+#define ERR_IF(exp) if (({				\
+	int _b = (exp) != 0;				\
+	if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n",	\
+		__func__, #exp, __FILE__, __LINE__);	\
+	 _b;						\
+	}))
+
+/* Defines to control fault insertion */
+enum {
+	DRBD_FAULT_MD_WR = 0,	/* meta data write */
+	DRBD_FAULT_MD_RD = 1,	/*           read  */
+	DRBD_FAULT_RS_WR = 2,	/* resync          */
+	DRBD_FAULT_RS_RD = 3,
+	DRBD_FAULT_DT_WR = 4,	/* data            */
+	DRBD_FAULT_DT_RD = 5,
+	DRBD_FAULT_DT_RA = 6,	/* data read ahead */
+	DRBD_FAULT_BM_ALLOC = 7,	/* bitmap allocation */
+	DRBD_FAULT_AL_EE = 8,	/* alloc ee */
+
+	DRBD_FAULT_MAX,
+};
+
+#ifdef CONFIG_DRBD_FAULT_INJECTION
+extern unsigned int
+_drbd_insert_fault(struct drbd_conf *mdev, unsigned int type);
+static inline int
+drbd_insert_fault(struct drbd_conf *mdev, unsigned int type) {
+	return fault_rate &&
+		(enable_faults & (1<<type)) &&
+		_drbd_insert_fault(mdev, type);
+}
+#define FAULT_ACTIVE(_m, _t) (drbd_insert_fault((_m), (_t)))
+
+#else
+#define FAULT_ACTIVE(_m, _t) (0)
+#endif
+
+/* integer division, round _UP_ to the next integer */
+#define div_ceil(A, B) ((A)/(B) + ((A)%(B) ? 1 : 0))
+/* usual integer division */
+#define div_floor(A, B) ((A)/(B))
+
+/* drbd_meta-data.c (still in drbd_main.c) */
+/* 4th incarnation of the disk layout. */
+#define DRBD_MD_MAGIC (DRBD_MAGIC+4)
+
+extern struct drbd_conf **minor_table;
+extern struct ratelimit_state drbd_ratelimit_state;
+
+/* on the wire */
+enum drbd_packets {
+	/* receiver (data socket) */
+	P_DATA		      = 0x00,
+	P_DATA_REPLY	      = 0x01, /* Response to P_DATA_REQUEST */
+	P_RS_DATA_REPLY	      = 0x02, /* Response to P_RS_DATA_REQUEST */
+	P_BARRIER	      = 0x03,
+	P_BITMAP	      = 0x04,
+	P_BECOME_SYNC_TARGET  = 0x05,
+	P_BECOME_SYNC_SOURCE  = 0x06,
+	P_UNPLUG_REMOTE	      = 0x07, /* Used at various times to hint the peer */
+	P_DATA_REQUEST	      = 0x08, /* Used to ask for a data block */
+	P_RS_DATA_REQUEST     = 0x09, /* Used to ask for a data block for resync */
+	P_SYNC_PARAM	      = 0x0a,
+	P_PROTOCOL	      = 0x0b,
+	P_UUIDS		      = 0x0c,
+	P_SIZES		      = 0x0d,
+	P_STATE		      = 0x0e,
+	P_SYNC_UUID	      = 0x0f,
+	P_AUTH_CHALLENGE      = 0x10,
+	P_AUTH_RESPONSE	      = 0x11,
+	P_STATE_CHG_REQ	      = 0x12,
+
+	/* asender (meta socket */
+	P_PING		      = 0x13,
+	P_PING_ACK	      = 0x14,
+	P_RECV_ACK	      = 0x15, /* Used in protocol B */
+	P_WRITE_ACK	      = 0x16, /* Used in protocol C */
+	P_RS_WRITE_ACK	      = 0x17, /* Is a P_WRITE_ACK, additionally call set_in_sync(). */
+	P_DISCARD_ACK	      = 0x18, /* Used in proto C, two-primaries conflict detection */
+	P_NEG_ACK	      = 0x19, /* Sent if local disk is unusable */
+	P_NEG_DREPLY	      = 0x1a, /* Local disk is broken... */
+	P_NEG_RS_DREPLY	      = 0x1b, /* Local disk is broken... */
+	P_BARRIER_ACK	      = 0x1c,
+	P_STATE_CHG_REPLY     = 0x1d,
+
+	/* "new" commands, no longer fitting into the ordering scheme above */
+
+	P_OV_REQUEST	      = 0x1e, /* data socket */
+	P_OV_REPLY	      = 0x1f,
+	P_OV_RESULT	      = 0x20, /* meta socket */
+	P_CSUM_RS_REQUEST     = 0x21, /* data socket */
+	P_RS_IS_IN_SYNC	      = 0x22, /* meta socket */
+	P_SYNC_PARAM89	      = 0x23, /* data socket, protocol version 89 replacement for P_SYNC_PARAM */
+	P_COMPRESSED_BITMAP   = 0x24, /* compressed or otherwise encoded bitmap transfer */
+
+	P_MAX_CMD	      = 0x25,
+	P_MAY_IGNORE	      = 0x100, /* Flag to test if (cmd > P_MAY_IGNORE) ... */
+	P_MAX_OPT_CMD	      = 0x101,
+
+	/* special command ids for handshake */
+
+	P_HAND_SHAKE_M	      = 0xfff1, /* First Packet on the MetaSock */
+	P_HAND_SHAKE_S	      = 0xfff2, /* First Packet on the Socket */
+
+	P_HAND_SHAKE	      = 0xfffe	/* FIXED for the next century! */
+};
+
+static inline const char *cmdname(enum drbd_packets cmd)
+{
+	/* THINK may need to become several global tables
+	 * when we want to support more than
+	 * one PRO_VERSION */
+	static const char *cmdnames[] = {
+		[P_DATA]	        = "Data",
+		[P_DATA_REPLY]	        = "DataReply",
+		[P_RS_DATA_REPLY]	= "RSDataReply",
+		[P_BARRIER]	        = "Barrier",
+		[P_BITMAP]	        = "ReportBitMap",
+		[P_BECOME_SYNC_TARGET]  = "BecomeSyncTarget",
+		[P_BECOME_SYNC_SOURCE]  = "BecomeSyncSource",
+		[P_UNPLUG_REMOTE]	= "UnplugRemote",
+		[P_DATA_REQUEST]	= "DataRequest",
+		[P_RS_DATA_REQUEST]     = "RSDataRequest",
+		[P_SYNC_PARAM]	        = "SyncParam",
+		[P_SYNC_PARAM89]	= "SyncParam89",
+		[P_PROTOCOL]            = "ReportProtocol",
+		[P_UUIDS]	        = "ReportUUIDs",
+		[P_SIZES]	        = "ReportSizes",
+		[P_STATE]	        = "ReportState",
+		[P_SYNC_UUID]           = "ReportSyncUUID",
+		[P_AUTH_CHALLENGE]      = "AuthChallenge",
+		[P_AUTH_RESPONSE]	= "AuthResponse",
+		[P_PING]		= "Ping",
+		[P_PING_ACK]	        = "PingAck",
+		[P_RECV_ACK]	        = "RecvAck",
+		[P_WRITE_ACK]	        = "WriteAck",
+		[P_RS_WRITE_ACK]	= "RSWriteAck",
+		[P_DISCARD_ACK]	        = "DiscardAck",
+		[P_NEG_ACK]	        = "NegAck",
+		[P_NEG_DREPLY]	        = "NegDReply",
+		[P_NEG_RS_DREPLY]	= "NegRSDReply",
+		[P_BARRIER_ACK]	        = "BarrierAck",
+		[P_STATE_CHG_REQ]       = "StateChgRequest",
+		[P_STATE_CHG_REPLY]     = "StateChgReply",
+		[P_OV_REQUEST]          = "OVRequest",
+		[P_OV_REPLY]            = "OVReply",
+		[P_OV_RESULT]           = "OVResult",
+		[P_MAX_CMD]	        = NULL,
+	};
+
+	if (cmd == P_HAND_SHAKE_M)
+		return "HandShakeM";
+	if (cmd == P_HAND_SHAKE_S)
+		return "HandShakeS";
+	if (cmd == P_HAND_SHAKE)
+		return "HandShake";
+	if (cmd >= P_MAX_CMD)
+		return "Unknown";
+	return cmdnames[cmd];
+}
+
+/* for sending/receiving the bitmap,
+ * possibly in some encoding scheme */
+struct bm_xfer_ctx {
+	/* "const"
+	 * stores total bits and long words
+	 * of the bitmap, so we don't need to
+	 * call the accessor functions over and again. */
+	unsigned long bm_bits;
+	unsigned long bm_words;
+	/* during xfer, current position within the bitmap */
+	unsigned long bit_offset;
+	unsigned long word_offset;
+
+	/* statistics; index: (h->command == P_BITMAP) */
+	unsigned packets[2];
+	unsigned bytes[2];
+};
+
+extern void INFO_bm_xfer_stats(struct drbd_conf *mdev,
+		const char *direction, struct bm_xfer_ctx *c);
+
+static inline void bm_xfer_ctx_bit_to_word_offset(struct bm_xfer_ctx *c)
+{
+	/* word_offset counts "native long words" (32 or 64 bit),
+	 * aligned at 64 bit.
+	 * Encoded packet may end at an unaligned bit offset.
+	 * In case a fallback clear text packet is transmitted in
+	 * between, we adjust this offset back to the last 64bit
+	 * aligned "native long word", which makes coding and decoding
+	 * the plain text bitmap much more convenient.  */
+#if BITS_PER_LONG == 64
+	c->word_offset = c->bit_offset >> 6;
+#elif BITS_PER_LONG == 32
+	c->word_offset = c->bit_offset >> 5;
+	c->word_offset &= ~(1UL);
+#else
+# error "unsupported BITS_PER_LONG"
+#endif
+}
+
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
+/* This is the layout for a packet on the wire.
+ * The byteorder is the network byte order.
+ *     (except block_id and barrier fields.
+ *	these are pointers to local structs
+ *	and have no relevance for the partner,
+ *	which just echoes them as received.)
+ *
+ * NOTE that the payload starts at a long aligned offset,
+ * regardless of 32 or 64 bit arch!
+ */
+struct p_header {
+	u32	  magic;
+	u16	  command;
+	u16	  length;	/* bytes of data after this header */
+	u8	  payload[0];
+} __packed;
+/* 8 bytes. packet FIXED for the next century! */
+
+/*
+ * short commands, packets without payload, plain p_header:
+ *   P_PING
+ *   P_PING_ACK
+ *   P_BECOME_SYNC_TARGET
+ *   P_BECOME_SYNC_SOURCE
+ *   P_UNPLUG_REMOTE
+ */
+
+/*
+ * commands with out-of-struct payload:
+ *   P_BITMAP    (no additional fields)
+ *   P_DATA, P_DATA_REPLY (see p_data)
+ *   P_COMPRESSED_BITMAP (see receive_compressed_bitmap)
+ */
+
+/* these defines must not be changed without changing the protocol version */
+#define DP_HARDBARRIER	      1
+#define DP_RW_SYNC	      2
+#define DP_MAY_SET_IN_SYNC    4
+
+struct p_data {
+	struct p_header head;
+	u64	    sector;    /* 64 bits sector number */
+	u64	    block_id;  /* to identify the request in protocol B&C */
+	u32	    seq_num;
+	u32	    dp_flags;
+} __packed;
+
+/*
+ * commands which share a struct:
+ *  p_block_ack:
+ *   P_RECV_ACK (proto B), P_WRITE_ACK (proto C),
+ *   P_DISCARD_ACK (proto C, two-primaries conflict detection)
+ *  p_block_req:
+ *   P_DATA_REQUEST, P_RS_DATA_REQUEST
+ */
+struct p_block_ack {
+	struct p_header head;
+	u64	    sector;
+	u64	    block_id;
+	u32	    blksize;
+	u32	    seq_num;
+} __packed;
+
+
+struct p_block_req {
+	struct p_header head;
+	u64 sector;
+	u64 block_id;
+	u32 blksize;
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+/*
+ * commands with their own struct for additional fields:
+ *   P_HAND_SHAKE
+ *   P_BARRIER
+ *   P_BARRIER_ACK
+ *   P_SYNC_PARAM
+ *   ReportParams
+ */
+
+struct p_handshake {
+	struct p_header head;	/* 8 bytes */
+	u32 protocol_min;
+	u32 feature_flags;
+	u32 protocol_max;
+
+	/* should be more than enough for future enhancements
+	 * for now, feature_flags and the reserverd array shall be zero.
+	 */
+
+	u32 _pad;
+	u64 reserverd[7];
+} __packed;
+/* 80 bytes, FIXED for the next century */
+
+struct p_barrier {
+	struct p_header head;
+	u32 barrier;	/* barrier number _handle_ only */
+	u32 pad;	/* to multiple of 8 Byte */
+} __packed;
+
+struct p_barrier_ack {
+	struct p_header head;
+	u32 barrier;
+	u32 set_size;
+} __packed;
+
+struct p_rs_param {
+	struct p_header head;
+	u32 rate;
+
+	      /* Since protocol version 88 and higher. */
+	char verify_alg[0];
+} __packed;
+
+struct p_rs_param_89 {
+	struct p_header head;
+	u32 rate;
+        /* protocol version 89: */
+	char verify_alg[SHARED_SECRET_MAX];
+	char csums_alg[SHARED_SECRET_MAX];
+} __packed;
+
+struct p_protocol {
+	struct p_header head;
+	u32 protocol;
+	u32 after_sb_0p;
+	u32 after_sb_1p;
+	u32 after_sb_2p;
+	u32 want_lose;
+	u32 two_primaries;
+
+              /* Since protocol version 87 and higher. */
+	char integrity_alg[0];
+
+} __packed;
+
+struct p_uuids {
+	struct p_header head;
+	u64 uuid[UI_EXTENDED_SIZE];
+} __packed;
+
+struct p_rs_uuid {
+	struct p_header head;
+	u64	    uuid;
+} __packed;
+
+struct p_sizes {
+	struct p_header head;
+	u64	    d_size;  /* size of disk */
+	u64	    u_size;  /* user requested size */
+	u64	    c_size;  /* current exported size */
+	u32	    max_segment_size;  /* Maximal size of a BIO */
+	u32	    queue_order_type;
+} __packed;
+
+struct p_state {
+	struct p_header head;
+	u32	    state;
+} __packed;
+
+struct p_req_state {
+	struct p_header head;
+	u32	    mask;
+	u32	    val;
+} __packed;
+
+struct p_req_state_reply {
+	struct p_header head;
+	u32	    retcode;
+} __packed;
+
+struct p_drbd06_param {
+	u64	  size;
+	u32	  state;
+	u32	  blksize;
+	u32	  protocol;
+	u32	  version;
+	u32	  gen_cnt[5];
+	u32	  bit_map_gen[5];
+} __packed;
+
+struct p_discard {
+	struct p_header head;
+	u64	    block_id;
+	u32	    seq_num;
+	u32	    pad;
+} __packed;
+
+/* Valid values for the encoding field.
+ * Bump proto version when changing this. */
+enum drbd_bitmap_code {
+	/* RLE_VLI_Bytes = 0,
+	 * and other bit variants had been defined during
+	 * algorithm evaluation. */
+	RLE_VLI_Bits = 2,
+};
+
+struct p_compressed_bm {
+	struct p_header head;
+	/* (encoding & 0x0f): actual encoding, see enum drbd_bitmap_code
+	 * (encoding & 0x80): polarity (set/unset) of first runlength
+	 * ((encoding >> 4) & 0x07): pad_bits, number of trailing zero bits
+	 * used to pad up to head.length bytes
+	 */
+	u8 encoding;
+
+	u8 code[0];
+} __packed;
+
+/* DCBP: Drbd Compressed Bitmap Packet ... */
+static inline enum drbd_bitmap_code
+DCBP_get_code(struct p_compressed_bm *p)
+{
+	return (enum drbd_bitmap_code)(p->encoding & 0x0f);
+}
+
+static inline void
+DCBP_set_code(struct p_compressed_bm *p, enum drbd_bitmap_code code)
+{
+	BUG_ON(code & ~0xf);
+	p->encoding = (p->encoding & ~0xf) | code;
+}
+
+static inline int
+DCBP_get_start(struct p_compressed_bm *p)
+{
+	return (p->encoding & 0x80) != 0;
+}
+
+static inline void
+DCBP_set_start(struct p_compressed_bm *p, int set)
+{
+	p->encoding = (p->encoding & ~0x80) | (set ? 0x80 : 0);
+}
+
+static inline int
+DCBP_get_pad_bits(struct p_compressed_bm *p)
+{
+	return (p->encoding >> 4) & 0x7;
+}
+
+static inline void
+DCBP_set_pad_bits(struct p_compressed_bm *p, int n)
+{
+	BUG_ON(n & ~0x7);
+	p->encoding = (p->encoding & (~0x7 << 4)) | (n << 4);
+}
+
+/* one bitmap packet, including the p_header,
+ * should fit within one _architecture independend_ page.
+ * so we need to use the fixed size 4KiB page size
+ * most architechtures have used for a long time.
+ */
+#define BM_PACKET_PAYLOAD_BYTES (4096 - sizeof(struct p_header))
+#define BM_PACKET_WORDS (BM_PACKET_PAYLOAD_BYTES/sizeof(long))
+#define BM_PACKET_VLI_BYTES_MAX (4096 - sizeof(struct p_compressed_bm))
+#if (PAGE_SIZE < 4096)
+/* drbd_send_bitmap / receive_bitmap would break horribly */
+#error "PAGE_SIZE too small"
+#endif
+
+union p_polymorph {
+        struct p_header          header;
+        struct p_handshake       handshake;
+        struct p_data            data;
+        struct p_block_ack       block_ack;
+        struct p_barrier         barrier;
+        struct p_barrier_ack     barrier_ack;
+        struct p_rs_param_89     rs_param_89;
+        struct p_protocol        protocol;
+        struct p_sizes           sizes;
+        struct p_uuids           uuids;
+        struct p_state           state;
+        struct p_req_state       req_state;
+        struct p_req_state_reply req_state_reply;
+        struct p_block_req       block_req;
+} __packed;
+
+/**********************************************************************/
+enum drbd_thread_state {
+	None,
+	Running,
+	Exiting,
+	Restarting
+};
+
+struct drbd_thread {
+	spinlock_t t_lock;
+	struct task_struct *task;
+	struct completion stop;
+	enum drbd_thread_state t_state;
+	int (*function) (struct drbd_thread *);
+	struct drbd_conf *mdev;
+	int reset_cpu_mask;
+};
+
+static inline enum drbd_thread_state get_t_state(struct drbd_thread *thi)
+{
+	/* THINK testing the t_state seems to be uncritical in all cases
+	 * (but thread_{start,stop}), so we can read it *without* the lock.
+	 *	--lge */
+
+	smp_rmb();
+	return thi->t_state;
+}
+
+
+/*
+ * Having this as the first member of a struct provides sort of "inheritance".
+ * "derived" structs can be "drbd_queue_work()"ed.
+ * The callback should know and cast back to the descendant struct.
+ * drbd_request and drbd_epoch_entry are descendants of drbd_work.
+ */
+struct drbd_work;
+typedef int (*drbd_work_cb)(struct drbd_conf *, struct drbd_work *, int cancel);
+struct drbd_work {
+	struct list_head list;
+	drbd_work_cb cb;
+};
+
+struct drbd_tl_epoch;
+struct drbd_request {
+	struct drbd_work w;
+	struct drbd_conf *mdev;
+
+	/* if local IO is not allowed, will be NULL.
+	 * if local IO _is_ allowed, holds the locally submitted bio clone,
+	 * or, after local IO completion, the ERR_PTR(error).
+	 * see drbd_endio_pri(). */
+	struct bio *private_bio;
+
+	struct hlist_node colision;
+	sector_t sector;
+	unsigned int size;
+	unsigned int epoch; /* barrier_nr */
+
+	/* barrier_nr: used to check on "completion" whether this req was in
+	 * the current epoch, and we therefore have to close it,
+	 * starting a new epoch...
+	 */
+
+	/* up to here, the struct layout is identical to drbd_epoch_entry;
+	 * we might be able to use that to our advantage...  */
+
+	struct list_head tl_requests; /* ring list in the transfer log */
+	struct bio *master_bio;       /* master bio pointer */
+	unsigned long rq_state; /* see comments above _req_mod() */
+	int seq_num;
+	unsigned long start_time;
+};
+
+struct drbd_tl_epoch {
+	struct drbd_work w;
+	struct list_head requests; /* requests before */
+	struct drbd_tl_epoch *next; /* pointer to the next barrier */
+	unsigned int br_number;  /* the barriers identifier. */
+	int n_req;	/* number of requests attached before this barrier */
+};
+
+struct drbd_request;
+
+/* These Tl_epoch_entries may be in one of 6 lists:
+   active_ee .. data packet being written
+   sync_ee   .. syncer block being written
+   done_ee   .. block written, need to send P_WRITE_ACK
+   read_ee   .. [RS]P_DATA_REQUEST being read
+*/
+
+struct drbd_epoch {
+	struct list_head list;
+	unsigned int barrier_nr;
+	atomic_t epoch_size; /* increased on every request added. */
+	atomic_t active;     /* increased on every req. added, and dec on every finished. */
+	unsigned long flags;
+};
+
+/* drbd_epoch flag bits */
+enum {
+	DE_BARRIER_IN_NEXT_EPOCH_ISSUED,
+	DE_BARRIER_IN_NEXT_EPOCH_DONE,
+	DE_CONTAINS_A_BARRIER,
+	DE_HAVE_BARRIER_NUMBER,
+	DE_IS_FINISHING,
+};
+
+enum epoch_event {
+	EV_PUT,
+	EV_GOT_BARRIER_NR,
+	EV_BARRIER_DONE,
+	EV_BECAME_LAST,
+	EV_CLEANUP = 32, /* used as flag */
+};
+
+struct drbd_epoch_entry {
+	struct drbd_work    w;
+	struct drbd_conf *mdev;
+	struct bio *private_bio;
+	struct hlist_node colision;
+	sector_t sector;
+	unsigned int size;
+	struct drbd_epoch *epoch;
+
+	/* up to here, the struct layout is identical to drbd_request;
+	 * we might be able to use that to our advantage...  */
+
+	unsigned int flags;
+	u64    block_id;
+};
+
+struct drbd_wq_barrier {
+	struct drbd_work w;
+	struct completion done;
+};
+
+struct digest_info {
+	int digest_size;
+	void *digest;
+};
+
+/* ee flag bits */
+enum {
+	__EE_CALL_AL_COMPLETE_IO,
+	__EE_CONFLICT_PENDING,
+	__EE_MAY_SET_IN_SYNC,
+	__EE_IS_BARRIER,
+};
+#define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO)
+#define EE_CONFLICT_PENDING    (1<<__EE_CONFLICT_PENDING)
+#define EE_MAY_SET_IN_SYNC     (1<<__EE_MAY_SET_IN_SYNC)
+#define EE_IS_BARRIER          (1<<__EE_IS_BARRIER)
+
+/* global flag bits */
+enum {
+	CREATE_BARRIER,		/* next P_DATA is preceeded by a P_BARRIER */
+	SIGNAL_ASENDER,		/* whether asender wants to be interrupted */
+	SEND_PING,		/* whether asender should send a ping asap */
+
+	STOP_SYNC_TIMER,	/* tell timer to cancel itself */
+	UNPLUG_QUEUED,		/* only relevant with kernel 2.4 */
+	UNPLUG_REMOTE,		/* sending a "UnplugRemote" could help */
+	MD_DIRTY,		/* current uuids and flags not yet on disk */
+	DISCARD_CONCURRENT,	/* Set on one node, cleared on the peer! */
+	USE_DEGR_WFC_T,		/* degr-wfc-timeout instead of wfc-timeout. */
+	CLUSTER_ST_CHANGE,	/* Cluster wide state change going on... */
+	CL_ST_CHG_SUCCESS,
+	CL_ST_CHG_FAIL,
+	CRASHED_PRIMARY,	/* This node was a crashed primary.
+				 * Gets cleared when the state.conn
+				 * goes into C_CONNECTED state. */
+	WRITE_BM_AFTER_RESYNC,	/* A kmalloc() during resync failed */
+	NO_BARRIER_SUPP,	/* underlying block device doesn't implement barriers */
+	CONSIDER_RESYNC,
+
+	MD_NO_BARRIER,		/* meta data device does not support barriers,
+				   so don't even try */
+	SUSPEND_IO,		/* suspend application io */
+	BITMAP_IO,		/* suspend application io;
+				   once no more io in flight, start bitmap io */
+	BITMAP_IO_QUEUED,       /* Started bitmap IO */
+	RESYNC_AFTER_NEG,       /* Resync after online grow after the attach&negotiate finished. */
+	NET_CONGESTED,		/* The data socket is congested */
+
+	CONFIG_PENDING,		/* serialization of (re)configuration requests.
+				 * if set, also prevents the device from dying */
+	DEVICE_DYING,		/* device became unconfigured,
+				 * but worker thread is still handling the cleanup.
+				 * reconfiguring (nl_disk_conf, nl_net_conf) is dissalowed,
+				 * while this is set. */
+	RESIZE_PENDING,		/* Size change detected locally, waiting for the response from
+				 * the peer, if it changed there as well. */
+};
+
+struct drbd_bitmap; /* opaque for drbd_conf */
+
+/* TODO sort members for performance
+ * MAYBE group them further */
+
+/* THINK maybe we actually want to use the default "event/%s" worker threads
+ * or similar in linux 2.6, which uses per cpu data and threads.
+ *
+ * To be general, this might need a spin_lock member.
+ * For now, please use the mdev->req_lock to protect list_head,
+ * see drbd_queue_work below.
+ */
+struct drbd_work_queue {
+	struct list_head q;
+	struct semaphore s; /* producers up it, worker down()s it */
+	spinlock_t q_lock;  /* to protect the list. */
+};
+
+struct drbd_socket {
+	struct drbd_work_queue work;
+	struct mutex mutex;
+	struct socket    *socket;
+	/* this way we get our
+	 * send/receive buffers off the stack */
+	union p_polymorph sbuf;
+	union p_polymorph rbuf;
+};
+
+struct drbd_md {
+	u64 md_offset;		/* sector offset to 'super' block */
+
+	u64 la_size_sect;	/* last agreed size, unit sectors */
+	u64 uuid[UI_SIZE];
+	u64 device_uuid;
+	u32 flags;
+	u32 md_size_sect;
+
+	s32 al_offset;	/* signed relative sector offset to al area */
+	s32 bm_offset;	/* signed relative sector offset to bitmap */
+
+	/* u32 al_nr_extents;	   important for restoring the AL
+	 * is stored into  sync_conf.al_extents, which in turn
+	 * gets applied to act_log->nr_elements
+	 */
+};
+
+/* for sync_conf and other types... */
+#define NL_PACKET(name, number, fields) struct name { fields };
+#define NL_INTEGER(pn,pr,member) int member;
+#define NL_INT64(pn,pr,member) __u64 member;
+#define NL_BIT(pn,pr,member)   unsigned member:1;
+#define NL_STRING(pn,pr,member,len) unsigned char member[len]; int member ## _len;
+#include "linux/drbd_nl.h"
+
+struct drbd_backing_dev {
+	struct block_device *backing_bdev;
+	struct block_device *md_bdev;
+	struct file *lo_file;
+	struct file *md_file;
+	struct drbd_md md;
+	struct disk_conf dc; /* The user provided config... */
+	sector_t known_size; /* last known size of that backing device */
+};
+
+struct drbd_md_io {
+	struct drbd_conf *mdev;
+	struct completion event;
+	int error;
+};
+
+struct bm_io_work {
+	struct drbd_work w;
+	char *why;
+	int (*io_fn)(struct drbd_conf *mdev);
+	void (*done)(struct drbd_conf *mdev, int rv);
+};
+
+enum write_ordering_e {
+	WO_none,
+	WO_drain_io,
+	WO_bdev_flush,
+	WO_bio_barrier
+};
+
+struct drbd_conf {
+	/* things that are stored as / read from meta data on disk */
+	unsigned long flags;
+
+	/* configured by drbdsetup */
+	struct net_conf *net_conf; /* protected by get_net_conf() and put_net_conf() */
+	struct syncer_conf sync_conf;
+	struct drbd_backing_dev *ldev __protected_by(local);
+
+	sector_t p_size;     /* partner's disk size */
+	struct request_queue *rq_queue;
+	struct block_device *this_bdev;
+	struct gendisk	    *vdisk;
+
+	struct drbd_socket data; /* data/barrier/cstate/parameter packets */
+	struct drbd_socket meta; /* ping/ack (metadata) packets */
+	int agreed_pro_version;  /* actually used protocol version */
+	unsigned long last_received; /* in jiffies, either socket */
+	unsigned int ko_count;
+	struct drbd_work  resync_work,
+			  unplug_work,
+			  md_sync_work;
+	struct timer_list resync_timer;
+	struct timer_list md_sync_timer;
+
+	/* Used after attach while negotiating new disk state. */
+	union drbd_state new_state_tmp;
+
+	union drbd_state state;
+	wait_queue_head_t misc_wait;
+	wait_queue_head_t state_wait;  /* upon each state change. */
+	unsigned int send_cnt;
+	unsigned int recv_cnt;
+	unsigned int read_cnt;
+	unsigned int writ_cnt;
+	unsigned int al_writ_cnt;
+	unsigned int bm_writ_cnt;
+	atomic_t ap_bio_cnt;	 /* Requests we need to complete */
+	atomic_t ap_pending_cnt; /* AP data packets on the wire, ack expected */
+	atomic_t rs_pending_cnt; /* RS request/data packets on the wire */
+	atomic_t unacked_cnt;	 /* Need to send replys for */
+	atomic_t local_cnt;	 /* Waiting for local completion */
+	atomic_t net_cnt;	 /* Users of net_conf */
+	spinlock_t req_lock;
+	struct drbd_tl_epoch *unused_spare_tle; /* for pre-allocation */
+	struct drbd_tl_epoch *newest_tle;
+	struct drbd_tl_epoch *oldest_tle;
+	struct list_head out_of_sequence_requests;
+	struct hlist_head *tl_hash;
+	unsigned int tl_hash_s;
+
+	/* blocks to sync in this run [unit BM_BLOCK_SIZE] */
+	unsigned long rs_total;
+	/* number of sync IOs that failed in this run */
+	unsigned long rs_failed;
+	/* Syncer's start time [unit jiffies] */
+	unsigned long rs_start;
+	/* cumulated time in PausedSyncX state [unit jiffies] */
+	unsigned long rs_paused;
+	/* block not up-to-date at mark [unit BM_BLOCK_SIZE] */
+	unsigned long rs_mark_left;
+	/* marks's time [unit jiffies] */
+	unsigned long rs_mark_time;
+	/* skipped because csum was equeal [unit BM_BLOCK_SIZE] */
+	unsigned long rs_same_csum;
+
+	/* where does the admin want us to start? (sector) */
+	sector_t ov_start_sector;
+	/* where are we now? (sector) */
+	sector_t ov_position;
+	/* Start sector of out of sync range (to merge printk reporting). */
+	sector_t ov_last_oos_start;
+	/* size of out-of-sync range in sectors. */
+	sector_t ov_last_oos_size;
+	unsigned long ov_left; /* in bits */
+	struct crypto_hash *csums_tfm;
+	struct crypto_hash *verify_tfm;
+
+	struct drbd_thread receiver;
+	struct drbd_thread worker;
+	struct drbd_thread asender;
+	struct drbd_bitmap *bitmap;
+	unsigned long bm_resync_fo; /* bit offset for drbd_bm_find_next */
+
+	/* Used to track operations of resync... */
+	struct lru_cache *resync;
+	/* Number of locked elements in resync LRU */
+	unsigned int resync_locked;
+	/* resync extent number waiting for application requests */
+	unsigned int resync_wenr;
+
+	int open_cnt;
+	u64 *p_uuid;
+	struct drbd_epoch *current_epoch;
+	spinlock_t epoch_lock;
+	unsigned int epochs;
+	enum write_ordering_e write_ordering;
+	struct list_head active_ee; /* IO in progress */
+	struct list_head sync_ee;   /* IO in progress */
+	struct list_head done_ee;   /* send ack */
+	struct list_head read_ee;   /* IO in progress */
+	struct list_head net_ee;    /* zero-copy network send in progress */
+	struct hlist_head *ee_hash; /* is proteced by req_lock! */
+	unsigned int ee_hash_s;
+
+	/* this one is protected by ee_lock, single thread */
+	struct drbd_epoch_entry *last_write_w_barrier;
+
+	int next_barrier_nr;
+	struct hlist_head *app_reads_hash; /* is proteced by req_lock */
+	struct list_head resync_reads;
+	atomic_t pp_in_use;
+	wait_queue_head_t ee_wait;
+	struct page *md_io_page;	/* one page buffer for md_io */
+	struct page *md_io_tmpp;	/* for logical_block_size != 512 */
+	struct mutex md_io_mutex;	/* protects the md_io_buffer */
+	spinlock_t al_lock;
+	wait_queue_head_t al_wait;
+	struct lru_cache *act_log;	/* activity log */
+	unsigned int al_tr_number;
+	int al_tr_cycle;
+	int al_tr_pos;   /* position of the next transaction in the journal */
+	struct crypto_hash *cram_hmac_tfm;
+	struct crypto_hash *integrity_w_tfm; /* to be used by the worker thread */
+	struct crypto_hash *integrity_r_tfm; /* to be used by the receiver thread */
+	void *int_dig_out;
+	void *int_dig_in;
+	void *int_dig_vv;
+	wait_queue_head_t seq_wait;
+	atomic_t packet_seq;
+	unsigned int peer_seq;
+	spinlock_t peer_seq_lock;
+	unsigned int minor;
+	unsigned long comm_bm_set; /* communicated number of set bits. */
+	cpumask_var_t cpu_mask;
+	struct bm_io_work bm_io_work;
+	u64 ed_uuid; /* UUID of the exposed data */
+	struct mutex state_mutex;
+	char congestion_reason;  /* Why we where congested... */
+};
+
+static inline struct drbd_conf *minor_to_mdev(unsigned int minor)
+{
+	struct drbd_conf *mdev;
+
+	mdev = minor < minor_count ? minor_table[minor] : NULL;
+
+	return mdev;
+}
+
+static inline unsigned int mdev_to_minor(struct drbd_conf *mdev)
+{
+	return mdev->minor;
+}
+
+/* returns 1 if it was successfull,
+ * returns 0 if there was no data socket.
+ * so wherever you are going to use the data.socket, e.g. do
+ * if (!drbd_get_data_sock(mdev))
+ *	return 0;
+ *	CODE();
+ * drbd_put_data_sock(mdev);
+ */
+static inline int drbd_get_data_sock(struct drbd_conf *mdev)
+{
+	mutex_lock(&mdev->data.mutex);
+	/* drbd_disconnect() could have called drbd_free_sock()
+	 * while we were waiting in down()... */
+	if (unlikely(mdev->data.socket == NULL)) {
+		mutex_unlock(&mdev->data.mutex);
+		return 0;
+	}
+	return 1;
+}
+
+static inline void drbd_put_data_sock(struct drbd_conf *mdev)
+{
+	mutex_unlock(&mdev->data.mutex);
+}
+
+/*
+ * function declarations
+ *************************/
+
+/* drbd_main.c */
+
+enum chg_state_flags {
+	CS_HARD	= 1,
+	CS_VERBOSE = 2,
+	CS_WAIT_COMPLETE = 4,
+	CS_SERIALIZE    = 8,
+	CS_ORDERED      = CS_WAIT_COMPLETE + CS_SERIALIZE,
+};
+
+extern void drbd_init_set_defaults(struct drbd_conf *mdev);
+extern int drbd_change_state(struct drbd_conf *mdev, enum chg_state_flags f,
+			union drbd_state mask, union drbd_state val);
+extern void drbd_force_state(struct drbd_conf *, union drbd_state,
+			union drbd_state);
+extern int _drbd_request_state(struct drbd_conf *, union drbd_state,
+			union drbd_state, enum chg_state_flags);
+extern int __drbd_set_state(struct drbd_conf *, union drbd_state,
+			    enum chg_state_flags, struct completion *done);
+extern void print_st_err(struct drbd_conf *, union drbd_state,
+			union drbd_state, int);
+extern int  drbd_thread_start(struct drbd_thread *thi);
+extern void _drbd_thread_stop(struct drbd_thread *thi, int restart, int wait);
+#ifdef CONFIG_SMP
+extern void drbd_thread_current_set_cpu(struct drbd_conf *mdev);
+extern void drbd_calc_cpu_mask(struct drbd_conf *mdev);
+#else
+#define drbd_thread_current_set_cpu(A) ({})
+#define drbd_calc_cpu_mask(A) ({})
+#endif
+extern void drbd_free_resources(struct drbd_conf *mdev);
+extern void tl_release(struct drbd_conf *mdev, unsigned int barrier_nr,
+		       unsigned int set_size);
+extern void tl_clear(struct drbd_conf *mdev);
+extern void _tl_add_barrier(struct drbd_conf *, struct drbd_tl_epoch *);
+extern void drbd_free_sock(struct drbd_conf *mdev);
+extern int drbd_send(struct drbd_conf *mdev, struct socket *sock,
+			void *buf, size_t size, unsigned msg_flags);
+extern int drbd_send_protocol(struct drbd_conf *mdev);
+extern int drbd_send_uuids(struct drbd_conf *mdev);
+extern int drbd_send_uuids_skip_initial_sync(struct drbd_conf *mdev);
+extern int drbd_send_sync_uuid(struct drbd_conf *mdev, u64 val);
+extern int drbd_send_sizes(struct drbd_conf *mdev, int trigger_reply);
+extern int _drbd_send_state(struct drbd_conf *mdev);
+extern int drbd_send_state(struct drbd_conf *mdev);
+extern int _drbd_send_cmd(struct drbd_conf *mdev, struct socket *sock,
+			enum drbd_packets cmd, struct p_header *h,
+			size_t size, unsigned msg_flags);
+#define USE_DATA_SOCKET 1
+#define USE_META_SOCKET 0
+extern int drbd_send_cmd(struct drbd_conf *mdev, int use_data_socket,
+			enum drbd_packets cmd, struct p_header *h,
+			size_t size);
+extern int drbd_send_cmd2(struct drbd_conf *mdev, enum drbd_packets cmd,
+			char *data, size_t size);
+extern int drbd_send_sync_param(struct drbd_conf *mdev, struct syncer_conf *sc);
+extern int drbd_send_b_ack(struct drbd_conf *mdev, u32 barrier_nr,
+			u32 set_size);
+extern int drbd_send_ack(struct drbd_conf *mdev, enum drbd_packets cmd,
+			struct drbd_epoch_entry *e);
+extern int drbd_send_ack_rp(struct drbd_conf *mdev, enum drbd_packets cmd,
+			struct p_block_req *rp);
+extern int drbd_send_ack_dp(struct drbd_conf *mdev, enum drbd_packets cmd,
+			struct p_data *dp);
+extern int drbd_send_ack_ex(struct drbd_conf *mdev, enum drbd_packets cmd,
+			    sector_t sector, int blksize, u64 block_id);
+extern int drbd_send_block(struct drbd_conf *mdev, enum drbd_packets cmd,
+			   struct drbd_epoch_entry *e);
+extern int drbd_send_dblock(struct drbd_conf *mdev, struct drbd_request *req);
+extern int _drbd_send_barrier(struct drbd_conf *mdev,
+			struct drbd_tl_epoch *barrier);
+extern int drbd_send_drequest(struct drbd_conf *mdev, int cmd,
+			      sector_t sector, int size, u64 block_id);
+extern int drbd_send_drequest_csum(struct drbd_conf *mdev,
+				   sector_t sector,int size,
+				   void *digest, int digest_size,
+				   enum drbd_packets cmd);
+extern int drbd_send_ov_request(struct drbd_conf *mdev,sector_t sector,int size);
+
+extern int drbd_send_bitmap(struct drbd_conf *mdev);
+extern int _drbd_send_bitmap(struct drbd_conf *mdev);
+extern int drbd_send_sr_reply(struct drbd_conf *mdev, int retcode);
+extern void drbd_free_bc(struct drbd_backing_dev *ldev);
+extern void drbd_mdev_cleanup(struct drbd_conf *mdev);
+
+/* drbd_meta-data.c (still in drbd_main.c) */
+extern void drbd_md_sync(struct drbd_conf *mdev);
+extern int  drbd_md_read(struct drbd_conf *mdev, struct drbd_backing_dev *bdev);
+/* maybe define them below as inline? */
+extern void drbd_uuid_set(struct drbd_conf *mdev, int idx, u64 val) __must_hold(local);
+extern void _drbd_uuid_set(struct drbd_conf *mdev, int idx, u64 val) __must_hold(local);
+extern void drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local);
+extern void _drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local);
+extern void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local);
+extern void drbd_md_set_flag(struct drbd_conf *mdev, int flags) __must_hold(local);
+extern void drbd_md_clear_flag(struct drbd_conf *mdev, int flags)__must_hold(local);
+extern int drbd_md_test_flag(struct drbd_backing_dev *, int);
+extern void drbd_md_mark_dirty(struct drbd_conf *mdev);
+extern void drbd_queue_bitmap_io(struct drbd_conf *mdev,
+				 int (*io_fn)(struct drbd_conf *),
+				 void (*done)(struct drbd_conf *, int),
+				 char *why);
+extern int drbd_bmio_set_n_write(struct drbd_conf *mdev);
+extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev);
+extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why);
+
+
+/* Meta data layout
+   We reserve a 128MB Block (4k aligned)
+   * either at the end of the backing device
+   * or on a seperate meta data device. */
+
+#define MD_RESERVED_SECT (128LU << 11)  /* 128 MB, unit sectors */
+/* The following numbers are sectors */
+#define MD_AL_OFFSET 8	    /* 8 Sectors after start of meta area */
+#define MD_AL_MAX_SIZE 64   /* = 32 kb LOG  ~ 3776 extents ~ 14 GB Storage */
+/* Allows up to about 3.8TB */
+#define MD_BM_OFFSET (MD_AL_OFFSET + MD_AL_MAX_SIZE)
+
+/* Since the smalles IO unit is usually 512 byte */
+#define MD_SECTOR_SHIFT	 9
+#define MD_SECTOR_SIZE	 (1<<MD_SECTOR_SHIFT)
+
+/* activity log */
+#define AL_EXTENTS_PT ((MD_SECTOR_SIZE-12)/8-1) /* 61 ; Extents per 512B sector */
+#define AL_EXTENT_SHIFT 22		 /* One extent represents 4M Storage */
+#define AL_EXTENT_SIZE (1<<AL_EXTENT_SHIFT)
+
+#if BITS_PER_LONG == 32
+#define LN2_BPL 5
+#define cpu_to_lel(A) cpu_to_le32(A)
+#define lel_to_cpu(A) le32_to_cpu(A)
+#elif BITS_PER_LONG == 64
+#define LN2_BPL 6
+#define cpu_to_lel(A) cpu_to_le64(A)
+#define lel_to_cpu(A) le64_to_cpu(A)
+#else
+#error "LN2 of BITS_PER_LONG unknown!"
+#endif
+
+/* resync bitmap */
+/* 16MB sized 'bitmap extent' to track syncer usage */
+struct bm_extent {
+	int rs_left; /* number of bits set (out of sync) in this extent. */
+	int rs_failed; /* number of failed resync requests in this extent. */
+	unsigned long flags;
+	struct lc_element lce;
+};
+
+#define BME_NO_WRITES  0  /* bm_extent.flags: no more requests on this one! */
+#define BME_LOCKED     1  /* bm_extent.flags: syncer active on this one. */
+
+/* drbd_bitmap.c */
+/*
+ * We need to store one bit for a block.
+ * Example: 1GB disk @ 4096 byte blocks ==> we need 32 KB bitmap.
+ * Bit 0 ==> local node thinks this block is binary identical on both nodes
+ * Bit 1 ==> local node thinks this block needs to be synced.
+ */
+
+#define BM_BLOCK_SHIFT  12			 /* 4k per bit */
+#define BM_BLOCK_SIZE	 (1<<BM_BLOCK_SHIFT)
+/* (9+3) : 512 bytes @ 8 bits; representing 16M storage
+ * per sector of on disk bitmap */
+#define BM_EXT_SHIFT	 (BM_BLOCK_SHIFT + MD_SECTOR_SHIFT + 3)  /* = 24 */
+#define BM_EXT_SIZE	 (1<<BM_EXT_SHIFT)
+
+#if (BM_EXT_SHIFT != 24) || (BM_BLOCK_SHIFT != 12)
+#error "HAVE YOU FIXED drbdmeta AS WELL??"
+#endif
+
+/* thus many _storage_ sectors are described by one bit */
+#define BM_SECT_TO_BIT(x)   ((x)>>(BM_BLOCK_SHIFT-9))
+#define BM_BIT_TO_SECT(x)   ((sector_t)(x)<<(BM_BLOCK_SHIFT-9))
+#define BM_SECT_PER_BIT     BM_BIT_TO_SECT(1)
+
+/* bit to represented kilo byte conversion */
+#define Bit2KB(bits) ((bits)<<(BM_BLOCK_SHIFT-10))
+
+/* in which _bitmap_ extent (resp. sector) the bit for a certain
+ * _storage_ sector is located in */
+#define BM_SECT_TO_EXT(x)   ((x)>>(BM_EXT_SHIFT-9))
+
+/* how much _storage_ sectors we have per bitmap sector */
+#define BM_EXT_TO_SECT(x)   ((sector_t)(x) << (BM_EXT_SHIFT-9))
+#define BM_SECT_PER_EXT     BM_EXT_TO_SECT(1)
+
+/* in one sector of the bitmap, we have this many activity_log extents. */
+#define AL_EXT_PER_BM_SECT  (1 << (BM_EXT_SHIFT - AL_EXTENT_SHIFT))
+#define BM_WORDS_PER_AL_EXT (1 << (AL_EXTENT_SHIFT-BM_BLOCK_SHIFT-LN2_BPL))
+
+#define BM_BLOCKS_PER_BM_EXT_B (BM_EXT_SHIFT - BM_BLOCK_SHIFT)
+#define BM_BLOCKS_PER_BM_EXT_MASK  ((1<<BM_BLOCKS_PER_BM_EXT_B) - 1)
+
+/* the extent in "PER_EXTENT" below is an activity log extent
+ * we need that many (long words/bytes) to store the bitmap
+ *		     of one AL_EXTENT_SIZE chunk of storage.
+ * we can store the bitmap for that many AL_EXTENTS within
+ * one sector of the _on_disk_ bitmap:
+ * bit	 0	  bit 37   bit 38	     bit (512*8)-1
+ *	     ...|........|........|.. // ..|........|
+ * sect. 0	 `296	  `304			   ^(512*8*8)-1
+ *
+#define BM_WORDS_PER_EXT    ( (AL_EXT_SIZE/BM_BLOCK_SIZE) / BITS_PER_LONG )
+#define BM_BYTES_PER_EXT    ( (AL_EXT_SIZE/BM_BLOCK_SIZE) / 8 )  // 128
+#define BM_EXT_PER_SECT	    ( 512 / BM_BYTES_PER_EXTENT )	 //   4
+ */
+
+#define DRBD_MAX_SECTORS_32 (0xffffffffLU)
+#define DRBD_MAX_SECTORS_BM \
+	  ((MD_RESERVED_SECT - MD_BM_OFFSET) * (1LL<<(BM_EXT_SHIFT-9)))
+#if DRBD_MAX_SECTORS_BM < DRBD_MAX_SECTORS_32
+#define DRBD_MAX_SECTORS      DRBD_MAX_SECTORS_BM
+#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_BM
+#elif !defined(CONFIG_LBD) && BITS_PER_LONG == 32
+#define DRBD_MAX_SECTORS      DRBD_MAX_SECTORS_32
+#define DRBD_MAX_SECTORS_FLEX DRBD_MAX_SECTORS_32
+#else
+#define DRBD_MAX_SECTORS      DRBD_MAX_SECTORS_BM
+/* 16 TB in units of sectors */
+#if BITS_PER_LONG == 32
+/* adjust by one page worth of bitmap,
+ * so we won't wrap around in drbd_bm_find_next_bit.
+ * you should use 64bit OS for that much storage, anyways. */
+#define DRBD_MAX_SECTORS_FLEX BM_BIT_TO_SECT(0xffff7fff)
+#else
+#define DRBD_MAX_SECTORS_FLEX BM_BIT_TO_SECT(0x1LU << 32)
+#endif
+#endif
+
+/* Sector shift value for the "hash" functions of tl_hash and ee_hash tables.
+ * With a value of 6 all IO in one 32K block make it to the same slot of the
+ * hash table. */
+#define HT_SHIFT 6
+#define DRBD_MAX_SEGMENT_SIZE (1U<<(9+HT_SHIFT))
+
+/* Number of elements in the app_reads_hash */
+#define APP_R_HSIZE 15
+
+extern int  drbd_bm_init(struct drbd_conf *mdev);
+extern int  drbd_bm_resize(struct drbd_conf *mdev, sector_t sectors);
+extern void drbd_bm_cleanup(struct drbd_conf *mdev);
+extern void drbd_bm_set_all(struct drbd_conf *mdev);
+extern void drbd_bm_clear_all(struct drbd_conf *mdev);
+extern int  drbd_bm_set_bits(
+		struct drbd_conf *mdev, unsigned long s, unsigned long e);
+extern int  drbd_bm_clear_bits(
+		struct drbd_conf *mdev, unsigned long s, unsigned long e);
+/* bm_set_bits variant for use while holding drbd_bm_lock */
+extern void _drbd_bm_set_bits(struct drbd_conf *mdev,
+		const unsigned long s, const unsigned long e);
+extern int  drbd_bm_test_bit(struct drbd_conf *mdev, unsigned long bitnr);
+extern int  drbd_bm_e_weight(struct drbd_conf *mdev, unsigned long enr);
+extern int  drbd_bm_write_sect(struct drbd_conf *mdev, unsigned long enr) __must_hold(local);
+extern int  drbd_bm_read(struct drbd_conf *mdev) __must_hold(local);
+extern int  drbd_bm_write(struct drbd_conf *mdev) __must_hold(local);
+extern unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev,
+		unsigned long al_enr);
+extern size_t	     drbd_bm_words(struct drbd_conf *mdev);
+extern unsigned long drbd_bm_bits(struct drbd_conf *mdev);
+extern sector_t      drbd_bm_capacity(struct drbd_conf *mdev);
+extern unsigned long drbd_bm_find_next(struct drbd_conf *mdev, unsigned long bm_fo);
+/* bm_find_next variants for use while you hold drbd_bm_lock() */
+extern unsigned long _drbd_bm_find_next(struct drbd_conf *mdev, unsigned long bm_fo);
+extern unsigned long _drbd_bm_find_next_zero(struct drbd_conf *mdev, unsigned long bm_fo);
+extern unsigned long drbd_bm_total_weight(struct drbd_conf *mdev);
+extern int drbd_bm_rs_done(struct drbd_conf *mdev);
+/* for receive_bitmap */
+extern void drbd_bm_merge_lel(struct drbd_conf *mdev, size_t offset,
+		size_t number, unsigned long *buffer);
+/* for _drbd_send_bitmap and drbd_bm_write_sect */
+extern void drbd_bm_get_lel(struct drbd_conf *mdev, size_t offset,
+		size_t number, unsigned long *buffer);
+
+extern void drbd_bm_lock(struct drbd_conf *mdev, char *why);
+extern void drbd_bm_unlock(struct drbd_conf *mdev);
+
+extern int drbd_bm_count_bits(struct drbd_conf *mdev, const unsigned long s, const unsigned long e);
+/* drbd_main.c */
+
+extern struct kmem_cache *drbd_request_cache;
+extern struct kmem_cache *drbd_ee_cache;	/* epoch entries */
+extern struct kmem_cache *drbd_bm_ext_cache;	/* bitmap extents */
+extern struct kmem_cache *drbd_al_ext_cache;	/* activity log extents */
+extern mempool_t *drbd_request_mempool;
+extern mempool_t *drbd_ee_mempool;
+
+extern struct page *drbd_pp_pool; /* drbd's page pool */
+extern spinlock_t   drbd_pp_lock;
+extern int	    drbd_pp_vacant;
+extern wait_queue_head_t drbd_pp_wait;
+
+extern rwlock_t global_state_lock;
+
+extern struct drbd_conf *drbd_new_device(unsigned int minor);
+extern void drbd_free_mdev(struct drbd_conf *mdev);
+
+extern int proc_details;
+
+/* drbd_req */
+extern int drbd_make_request_26(struct request_queue *q, struct bio *bio);
+extern int drbd_read_remote(struct drbd_conf *mdev, struct drbd_request *req);
+extern int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct bio_vec *bvec);
+extern int is_valid_ar_handle(struct drbd_request *, sector_t);
+
+
+/* drbd_nl.c */
+extern void drbd_suspend_io(struct drbd_conf *mdev);
+extern void drbd_resume_io(struct drbd_conf *mdev);
+extern char *ppsize(char *buf, unsigned long long size);
+extern sector_t drbd_new_dev_size(struct drbd_conf *,
+		struct drbd_backing_dev *);
+enum determine_dev_size { dev_size_error = -1, unchanged = 0, shrunk = 1, grew = 2 };
+extern enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *) __must_hold(local);
+extern void resync_after_online_grow(struct drbd_conf *);
+extern void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int) __must_hold(local);
+extern int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role,
+		int force);
+enum drbd_disk_state drbd_try_outdate_peer(struct drbd_conf *mdev);
+extern int drbd_khelper(struct drbd_conf *mdev, char *cmd);
+
+/* drbd_worker.c */
+extern int drbd_worker(struct drbd_thread *thi);
+extern int drbd_alter_sa(struct drbd_conf *mdev, int na);
+extern void drbd_start_resync(struct drbd_conf *mdev, enum drbd_conns side);
+extern void resume_next_sg(struct drbd_conf *mdev);
+extern void suspend_other_sg(struct drbd_conf *mdev);
+extern int drbd_resync_finished(struct drbd_conf *mdev);
+/* maybe rather drbd_main.c ? */
+extern int drbd_md_sync_page_io(struct drbd_conf *mdev,
+		struct drbd_backing_dev *bdev, sector_t sector, int rw);
+extern void drbd_ov_oos_found(struct drbd_conf*, sector_t, int);
+
+static inline void ov_oos_print(struct drbd_conf *mdev)
+{
+	if (mdev->ov_last_oos_size) {
+		dev_err(DEV, "Out of sync: start=%llu, size=%lu (sectors)\n",
+		     (unsigned long long)mdev->ov_last_oos_start,
+		     (unsigned long)mdev->ov_last_oos_size);
+	}
+	mdev->ov_last_oos_size=0;
+}
+
+
+extern void drbd_csum(struct drbd_conf *, struct crypto_hash *, struct bio *, void *);
+/* worker callbacks */
+extern int w_req_cancel_conflict(struct drbd_conf *, struct drbd_work *, int);
+extern int w_read_retry_remote(struct drbd_conf *, struct drbd_work *, int);
+extern int w_e_end_data_req(struct drbd_conf *, struct drbd_work *, int);
+extern int w_e_end_rsdata_req(struct drbd_conf *, struct drbd_work *, int);
+extern int w_e_end_csum_rs_req(struct drbd_conf *, struct drbd_work *, int);
+extern int w_e_end_ov_reply(struct drbd_conf *, struct drbd_work *, int);
+extern int w_e_end_ov_req(struct drbd_conf *, struct drbd_work *, int);
+extern int w_ov_finished(struct drbd_conf *, struct drbd_work *, int);
+extern int w_resync_inactive(struct drbd_conf *, struct drbd_work *, int);
+extern int w_resume_next_sg(struct drbd_conf *, struct drbd_work *, int);
+extern int w_io_error(struct drbd_conf *, struct drbd_work *, int);
+extern int w_send_write_hint(struct drbd_conf *, struct drbd_work *, int);
+extern int w_make_resync_request(struct drbd_conf *, struct drbd_work *, int);
+extern int w_send_dblock(struct drbd_conf *, struct drbd_work *, int);
+extern int w_send_barrier(struct drbd_conf *, struct drbd_work *, int);
+extern int w_send_read_req(struct drbd_conf *, struct drbd_work *, int);
+extern int w_prev_work_done(struct drbd_conf *, struct drbd_work *, int);
+extern int w_e_reissue(struct drbd_conf *, struct drbd_work *, int);
+
+extern void resync_timer_fn(unsigned long data);
+
+/* drbd_receiver.c */
+extern int drbd_release_ee(struct drbd_conf *mdev, struct list_head *list);
+extern struct drbd_epoch_entry *drbd_alloc_ee(struct drbd_conf *mdev,
+					    u64 id,
+					    sector_t sector,
+					    unsigned int data_size,
+					    gfp_t gfp_mask) __must_hold(local);
+extern void drbd_free_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e);
+extern void drbd_wait_ee_list_empty(struct drbd_conf *mdev,
+		struct list_head *head);
+extern void _drbd_wait_ee_list_empty(struct drbd_conf *mdev,
+		struct list_head *head);
+extern void drbd_set_recv_tcq(struct drbd_conf *mdev, int tcq_enabled);
+extern void _drbd_clear_done_ee(struct drbd_conf *mdev, struct list_head *to_be_freed);
+extern void drbd_flush_workqueue(struct drbd_conf *mdev);
+
+/* yes, there is kernel_setsockopt, but only since 2.6.18. we don't need to
+ * mess with get_fs/set_fs, we know we are KERNEL_DS always. */
+static inline int drbd_setsockopt(struct socket *sock, int level, int optname,
+			char __user *optval, int optlen)
+{
+	int err;
+	if (level == SOL_SOCKET)
+		err = sock_setsockopt(sock, level, optname, optval, optlen);
+	else
+		err = sock->ops->setsockopt(sock, level, optname, optval,
+					    optlen);
+	return err;
+}
+
+static inline void drbd_tcp_cork(struct socket *sock)
+{
+	int __user val = 1;
+	(void) drbd_setsockopt(sock, SOL_TCP, TCP_CORK,
+			(char __user *)&val, sizeof(val));
+}
+
+static inline void drbd_tcp_uncork(struct socket *sock)
+{
+	int __user val = 0;
+	(void) drbd_setsockopt(sock, SOL_TCP, TCP_CORK,
+			(char __user *)&val, sizeof(val));
+}
+
+static inline void drbd_tcp_nodelay(struct socket *sock)
+{
+	int __user val = 1;
+	(void) drbd_setsockopt(sock, SOL_TCP, TCP_NODELAY,
+			(char __user *)&val, sizeof(val));
+}
+
+static inline void drbd_tcp_quickack(struct socket *sock)
+{
+	int __user val = 1;
+	(void) drbd_setsockopt(sock, SOL_TCP, TCP_QUICKACK,
+			(char __user *)&val, sizeof(val));
+}
+
+void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo);
+
+/* drbd_proc.c */
+extern struct proc_dir_entry *drbd_proc;
+extern struct file_operations drbd_proc_fops;
+extern const char *drbd_conn_str(enum drbd_conns s);
+extern const char *drbd_role_str(enum drbd_role s);
+
+/* drbd_actlog.c */
+extern void drbd_al_begin_io(struct drbd_conf *mdev, sector_t sector);
+extern void drbd_al_complete_io(struct drbd_conf *mdev, sector_t sector);
+extern void drbd_rs_complete_io(struct drbd_conf *mdev, sector_t sector);
+extern int drbd_rs_begin_io(struct drbd_conf *mdev, sector_t sector);
+extern int drbd_try_rs_begin_io(struct drbd_conf *mdev, sector_t sector);
+extern void drbd_rs_cancel_all(struct drbd_conf *mdev);
+extern int drbd_rs_del_all(struct drbd_conf *mdev);
+extern void drbd_rs_failed_io(struct drbd_conf *mdev,
+		sector_t sector, int size);
+extern int drbd_al_read_log(struct drbd_conf *mdev, struct drbd_backing_dev *);
+extern void __drbd_set_in_sync(struct drbd_conf *mdev, sector_t sector,
+		int size, const char *file, const unsigned int line);
+#define drbd_set_in_sync(mdev, sector, size) \
+	__drbd_set_in_sync(mdev, sector, size, __FILE__, __LINE__)
+extern void __drbd_set_out_of_sync(struct drbd_conf *mdev, sector_t sector,
+		int size, const char *file, const unsigned int line);
+#define drbd_set_out_of_sync(mdev, sector, size) \
+	__drbd_set_out_of_sync(mdev, sector, size, __FILE__, __LINE__)
+extern void drbd_al_apply_to_bm(struct drbd_conf *mdev);
+extern void drbd_al_to_on_disk_bm(struct drbd_conf *mdev);
+extern void drbd_al_shrink(struct drbd_conf *mdev);
+
+
+/* drbd_nl.c */
+
+void drbd_nl_cleanup(void);
+int __init drbd_nl_init(void);
+void drbd_bcast_state(struct drbd_conf *mdev, union drbd_state);
+void drbd_bcast_sync_progress(struct drbd_conf *mdev);
+void drbd_bcast_ee(struct drbd_conf *mdev,
+		const char *reason, const int dgs,
+		const char* seen_hash, const char* calc_hash,
+		const struct drbd_epoch_entry* e);
+
+
+/**
+ * DOC: DRBD State macros
+ *
+ * These macros are used to express state changes in easily readable form.
+ *
+ * The NS macros expand to a mask and a value, that can be bit ored onto the
+ * current state as soon as the spinlock (req_lock) was taken.
+ *
+ * The _NS macros are used for state functions that get called with the
+ * spinlock. These macros expand directly to the new state value.
+ *
+ * Besides the basic forms NS() and _NS() additional _?NS[23] are defined
+ * to express state changes that affect more than one aspect of the state.
+ *
+ * E.g. NS2(conn, C_CONNECTED, peer, R_SECONDARY)
+ * Means that the network connection was established and that the peer
+ * is in secondary role.
+ */
+#define role_MASK R_MASK
+#define peer_MASK R_MASK
+#define disk_MASK D_MASK
+#define pdsk_MASK D_MASK
+#define conn_MASK C_MASK
+#define susp_MASK 1
+#define user_isp_MASK 1
+#define aftr_isp_MASK 1
+
+#define NS(T, S) \
+	({ union drbd_state mask; mask.i = 0; mask.T = T##_MASK; mask; }), \
+	({ union drbd_state val; val.i = 0; val.T = (S); val; })
+#define NS2(T1, S1, T2, S2) \
+	({ union drbd_state mask; mask.i = 0; mask.T1 = T1##_MASK; \
+	  mask.T2 = T2##_MASK; mask; }), \
+	({ union drbd_state val; val.i = 0; val.T1 = (S1); \
+	  val.T2 = (S2); val; })
+#define NS3(T1, S1, T2, S2, T3, S3) \
+	({ union drbd_state mask; mask.i = 0; mask.T1 = T1##_MASK; \
+	  mask.T2 = T2##_MASK; mask.T3 = T3##_MASK; mask; }), \
+	({ union drbd_state val;  val.i = 0; val.T1 = (S1); \
+	  val.T2 = (S2); val.T3 = (S3); val; })
+
+#define _NS(D, T, S) \
+	D, ({ union drbd_state __ns; __ns.i = D->state.i; __ns.T = (S); __ns; })
+#define _NS2(D, T1, S1, T2, S2) \
+	D, ({ union drbd_state __ns; __ns.i = D->state.i; __ns.T1 = (S1); \
+	__ns.T2 = (S2); __ns; })
+#define _NS3(D, T1, S1, T2, S2, T3, S3) \
+	D, ({ union drbd_state __ns; __ns.i = D->state.i; __ns.T1 = (S1); \
+	__ns.T2 = (S2); __ns.T3 = (S3); __ns; })
+
+/*
+ * inline helper functions
+ *************************/
+
+static inline void drbd_state_lock(struct drbd_conf *mdev)
+{
+	wait_event(mdev->misc_wait,
+		   !test_and_set_bit(CLUSTER_ST_CHANGE, &mdev->flags));
+}
+
+static inline void drbd_state_unlock(struct drbd_conf *mdev)
+{
+	clear_bit(CLUSTER_ST_CHANGE, &mdev->flags);
+	wake_up(&mdev->misc_wait);
+}
+
+static inline int _drbd_set_state(struct drbd_conf *mdev,
+				   union drbd_state ns, enum chg_state_flags flags,
+				   struct completion *done)
+{
+	int rv;
+
+	read_lock(&global_state_lock);
+	rv = __drbd_set_state(mdev, ns, flags, done);
+	read_unlock(&global_state_lock);
+
+	return rv;
+}
+
+/**
+ * drbd_request_state() - Reqest a state change
+ * @mdev:	DRBD device.
+ * @mask:	mask of state bits to change.
+ * @val:	value of new state bits.
+ *
+ * This is the most graceful way of requesting a state change. It is verbose
+ * quite verbose in case the state change is not possible, and all those
+ * state changes are globally serialized.
+ */
+static inline int drbd_request_state(struct drbd_conf *mdev,
+				     union drbd_state mask,
+				     union drbd_state val)
+{
+	return _drbd_request_state(mdev, mask, val, CS_VERBOSE + CS_ORDERED);
+}
+
+#define __drbd_chk_io_error(m,f) __drbd_chk_io_error_(m,f, __func__)
+static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach, const char *where)
+{
+	switch (mdev->ldev->dc.on_io_error) {
+	case EP_PASS_ON:
+		if (!forcedetach) {
+			if (printk_ratelimit())
+				dev_err(DEV, "Local IO failed in %s."
+					     "Passing error on...\n", where);
+			break;
+		}
+		/* NOTE fall through to detach case if forcedetach set */
+	case EP_DETACH:
+	case EP_CALL_HELPER:
+		if (mdev->state.disk > D_FAILED) {
+			_drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL);
+			dev_err(DEV, "Local IO failed in %s."
+				     "Detaching...\n", where);
+		}
+		break;
+	}
+}
+
+/**
+ * drbd_chk_io_error: Handle the on_io_error setting, should be called from all io completion handlers
+ * @mdev:	 DRBD device.
+ * @error:	 Error code passed to the IO completion callback
+ * @forcedetach: Force detach. I.e. the error happened while accessing the meta data
+ *
+ * See also drbd_main.c:after_state_ch() if (os.disk > D_FAILED && ns.disk == D_FAILED)
+ */
+#define drbd_chk_io_error(m,e,f) drbd_chk_io_error_(m,e,f, __func__)
+static inline void drbd_chk_io_error_(struct drbd_conf *mdev,
+	int error, int forcedetach, const char *where)
+{
+	if (error) {
+		unsigned long flags;
+		spin_lock_irqsave(&mdev->req_lock, flags);
+		__drbd_chk_io_error_(mdev, forcedetach, where);
+		spin_unlock_irqrestore(&mdev->req_lock, flags);
+	}
+}
+
+
+/**
+ * drbd_md_first_sector() - Returns the first sector number of the meta data area
+ * @bdev:	Meta data block device.
+ *
+ * BTW, for internal meta data, this happens to be the maximum capacity
+ * we could agree upon with our peer node.
+ */
+static inline sector_t drbd_md_first_sector(struct drbd_backing_dev *bdev)
+{
+	switch (bdev->dc.meta_dev_idx) {
+	case DRBD_MD_INDEX_INTERNAL:
+	case DRBD_MD_INDEX_FLEX_INT:
+		return bdev->md.md_offset + bdev->md.bm_offset;
+	case DRBD_MD_INDEX_FLEX_EXT:
+	default:
+		return bdev->md.md_offset;
+	}
+}
+
+/**
+ * drbd_md_last_sector() - Return the last sector number of the meta data area
+ * @bdev:	Meta data block device.
+ */
+static inline sector_t drbd_md_last_sector(struct drbd_backing_dev *bdev)
+{
+	switch (bdev->dc.meta_dev_idx) {
+	case DRBD_MD_INDEX_INTERNAL:
+	case DRBD_MD_INDEX_FLEX_INT:
+		return bdev->md.md_offset + MD_AL_OFFSET - 1;
+	case DRBD_MD_INDEX_FLEX_EXT:
+	default:
+		return bdev->md.md_offset + bdev->md.md_size_sect;
+	}
+}
+
+/* Returns the number of 512 byte sectors of the device */
+static inline sector_t drbd_get_capacity(struct block_device *bdev)
+{
+	/* return bdev ? get_capacity(bdev->bd_disk) : 0; */
+	return bdev ? bdev->bd_inode->i_size >> 9 : 0;
+}
+
+/**
+ * drbd_get_max_capacity() - Returns the capacity we announce to out peer
+ * @bdev:	Meta data block device.
+ *
+ * returns the capacity we announce to out peer.  we clip ourselves at the
+ * various MAX_SECTORS, because if we don't, current implementation will
+ * oops sooner or later
+ */
+static inline sector_t drbd_get_max_capacity(struct drbd_backing_dev *bdev)
+{
+	sector_t s;
+	switch (bdev->dc.meta_dev_idx) {
+	case DRBD_MD_INDEX_INTERNAL:
+	case DRBD_MD_INDEX_FLEX_INT:
+		s = drbd_get_capacity(bdev->backing_bdev)
+			? min_t(sector_t, DRBD_MAX_SECTORS_FLEX,
+					drbd_md_first_sector(bdev))
+			: 0;
+		break;
+	case DRBD_MD_INDEX_FLEX_EXT:
+		s = min_t(sector_t, DRBD_MAX_SECTORS_FLEX,
+				drbd_get_capacity(bdev->backing_bdev));
+		/* clip at maximum size the meta device can support */
+		s = min_t(sector_t, s,
+			BM_EXT_TO_SECT(bdev->md.md_size_sect
+				     - bdev->md.bm_offset));
+		break;
+	default:
+		s = min_t(sector_t, DRBD_MAX_SECTORS,
+				drbd_get_capacity(bdev->backing_bdev));
+	}
+	return s;
+}
+
+/**
+ * drbd_md_ss__() - Return the sector number of our meta data super block
+ * @mdev:	DRBD device.
+ * @bdev:	Meta data block device.
+ */
+static inline sector_t drbd_md_ss__(struct drbd_conf *mdev,
+				    struct drbd_backing_dev *bdev)
+{
+	switch (bdev->dc.meta_dev_idx) {
+	default: /* external, some index */
+		return MD_RESERVED_SECT * bdev->dc.meta_dev_idx;
+	case DRBD_MD_INDEX_INTERNAL:
+		/* with drbd08, internal meta data is always "flexible" */
+	case DRBD_MD_INDEX_FLEX_INT:
+		/* sizeof(struct md_on_disk_07) == 4k
+		 * position: last 4k aligned block of 4k size */
+		if (!bdev->backing_bdev) {
+			if (__ratelimit(&drbd_ratelimit_state)) {
+				dev_err(DEV, "bdev->backing_bdev==NULL\n");
+				dump_stack();
+			}
+			return 0;
+		}
+		return (drbd_get_capacity(bdev->backing_bdev) & ~7ULL)
+			- MD_AL_OFFSET;
+	case DRBD_MD_INDEX_FLEX_EXT:
+		return 0;
+	}
+}
+
+static inline void
+_drbd_queue_work(struct drbd_work_queue *q, struct drbd_work *w)
+{
+	list_add_tail(&w->list, &q->q);
+	up(&q->s);
+}
+
+static inline void
+drbd_queue_work_front(struct drbd_work_queue *q, struct drbd_work *w)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&q->q_lock, flags);
+	list_add(&w->list, &q->q);
+	up(&q->s); /* within the spinlock,
+		      see comment near end of drbd_worker() */
+	spin_unlock_irqrestore(&q->q_lock, flags);
+}
+
+static inline void
+drbd_queue_work(struct drbd_work_queue *q, struct drbd_work *w)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&q->q_lock, flags);
+	list_add_tail(&w->list, &q->q);
+	up(&q->s); /* within the spinlock,
+		      see comment near end of drbd_worker() */
+	spin_unlock_irqrestore(&q->q_lock, flags);
+}
+
+static inline void wake_asender(struct drbd_conf *mdev)
+{
+	if (test_bit(SIGNAL_ASENDER, &mdev->flags))
+		force_sig(DRBD_SIG, mdev->asender.task);
+}
+
+static inline void request_ping(struct drbd_conf *mdev)
+{
+	set_bit(SEND_PING, &mdev->flags);
+	wake_asender(mdev);
+}
+
+static inline int drbd_send_short_cmd(struct drbd_conf *mdev,
+	enum drbd_packets cmd)
+{
+	struct p_header h;
+	return drbd_send_cmd(mdev, USE_DATA_SOCKET, cmd, &h, sizeof(h));
+}
+
+static inline int drbd_send_ping(struct drbd_conf *mdev)
+{
+	struct p_header h;
+	return drbd_send_cmd(mdev, USE_META_SOCKET, P_PING, &h, sizeof(h));
+}
+
+static inline int drbd_send_ping_ack(struct drbd_conf *mdev)
+{
+	struct p_header h;
+	return drbd_send_cmd(mdev, USE_META_SOCKET, P_PING_ACK, &h, sizeof(h));
+}
+
+static inline void drbd_thread_stop(struct drbd_thread *thi)
+{
+	_drbd_thread_stop(thi, FALSE, TRUE);
+}
+
+static inline void drbd_thread_stop_nowait(struct drbd_thread *thi)
+{
+	_drbd_thread_stop(thi, FALSE, FALSE);
+}
+
+static inline void drbd_thread_restart_nowait(struct drbd_thread *thi)
+{
+	_drbd_thread_stop(thi, TRUE, FALSE);
+}
+
+/* counts how many answer packets packets we expect from our peer,
+ * for either explicit application requests,
+ * or implicit barrier packets as necessary.
+ * increased:
+ *  w_send_barrier
+ *  _req_mod(req, queue_for_net_write or queue_for_net_read);
+ *    it is much easier and equally valid to count what we queue for the
+ *    worker, even before it actually was queued or send.
+ *    (drbd_make_request_common; recovery path on read io-error)
+ * decreased:
+ *  got_BarrierAck (respective tl_clear, tl_clear_barrier)
+ *  _req_mod(req, data_received)
+ *     [from receive_DataReply]
+ *  _req_mod(req, write_acked_by_peer or recv_acked_by_peer or neg_acked)
+ *     [from got_BlockAck (P_WRITE_ACK, P_RECV_ACK)]
+ *     for some reason it is NOT decreased in got_NegAck,
+ *     but in the resulting cleanup code from report_params.
+ *     we should try to remember the reason for that...
+ *  _req_mod(req, send_failed or send_canceled)
+ *  _req_mod(req, connection_lost_while_pending)
+ *     [from tl_clear_barrier]
+ */
+static inline void inc_ap_pending(struct drbd_conf *mdev)
+{
+	atomic_inc(&mdev->ap_pending_cnt);
+}
+
+#define ERR_IF_CNT_IS_NEGATIVE(which)				\
+	if (atomic_read(&mdev->which) < 0)			\
+		dev_err(DEV, "in %s:%d: " #which " = %d < 0 !\n",	\
+		    __func__ , __LINE__ ,			\
+		    atomic_read(&mdev->which))
+
+#define dec_ap_pending(mdev)	do {				\
+	typecheck(struct drbd_conf *, mdev);			\
+	if (atomic_dec_and_test(&mdev->ap_pending_cnt))		\
+		wake_up(&mdev->misc_wait);			\
+	ERR_IF_CNT_IS_NEGATIVE(ap_pending_cnt); } while (0)
+
+/* counts how many resync-related answers we still expect from the peer
+ *		     increase			decrease
+ * C_SYNC_TARGET sends P_RS_DATA_REQUEST (and expects P_RS_DATA_REPLY)
+ * C_SYNC_SOURCE sends P_RS_DATA_REPLY   (and expects P_WRITE_ACK whith ID_SYNCER)
+ *					   (or P_NEG_ACK with ID_SYNCER)
+ */
+static inline void inc_rs_pending(struct drbd_conf *mdev)
+{
+	atomic_inc(&mdev->rs_pending_cnt);
+}
+
+#define dec_rs_pending(mdev)	do {				\
+	typecheck(struct drbd_conf *, mdev);			\
+	atomic_dec(&mdev->rs_pending_cnt);			\
+	ERR_IF_CNT_IS_NEGATIVE(rs_pending_cnt); } while (0)
+
+/* counts how many answers we still need to send to the peer.
+ * increased on
+ *  receive_Data	unless protocol A;
+ *			we need to send a P_RECV_ACK (proto B)
+ *			or P_WRITE_ACK (proto C)
+ *  receive_RSDataReply (recv_resync_read) we need to send a P_WRITE_ACK
+ *  receive_DataRequest (receive_RSDataRequest) we need to send back P_DATA
+ *  receive_Barrier_*	we need to send a P_BARRIER_ACK
+ */
+static inline void inc_unacked(struct drbd_conf *mdev)
+{
+	atomic_inc(&mdev->unacked_cnt);
+}
+
+#define dec_unacked(mdev)	do {				\
+	typecheck(struct drbd_conf *, mdev);			\
+	atomic_dec(&mdev->unacked_cnt);				\
+	ERR_IF_CNT_IS_NEGATIVE(unacked_cnt); } while (0)
+
+#define sub_unacked(mdev, n)	do {				\
+	typecheck(struct drbd_conf *, mdev);			\
+	atomic_sub(n, &mdev->unacked_cnt);			\
+	ERR_IF_CNT_IS_NEGATIVE(unacked_cnt); } while (0)
+
+
+static inline void put_net_conf(struct drbd_conf *mdev)
+{
+	if (atomic_dec_and_test(&mdev->net_cnt))
+		wake_up(&mdev->misc_wait);
+}
+
+/**
+ * get_net_conf() - Increase ref count on mdev->net_conf; Returns 0 if nothing there
+ * @mdev:	DRBD device.
+ *
+ * You have to call put_net_conf() when finished working with mdev->net_conf.
+ */
+static inline int get_net_conf(struct drbd_conf *mdev)
+{
+	int have_net_conf;
+
+	atomic_inc(&mdev->net_cnt);
+	have_net_conf = mdev->state.conn >= C_UNCONNECTED;
+	if (!have_net_conf)
+		put_net_conf(mdev);
+	return have_net_conf;
+}
+
+/**
+ * get_ldev() - Increase the ref count on mdev->ldev. Returns 0 if there is no ldev
+ * @M:		DRBD device.
+ *
+ * You have to call put_ldev() when finished working with mdev->ldev.
+ */
+#define get_ldev(M) __cond_lock(local, _get_ldev_if_state(M,D_INCONSISTENT))
+#define get_ldev_if_state(M,MINS) __cond_lock(local, _get_ldev_if_state(M,MINS))
+
+static inline void put_ldev(struct drbd_conf *mdev)
+{
+	__release(local);
+	if (atomic_dec_and_test(&mdev->local_cnt))
+		wake_up(&mdev->misc_wait);
+	D_ASSERT(atomic_read(&mdev->local_cnt) >= 0);
+}
+
+#ifndef __CHECKER__
+static inline int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_state mins)
+{
+	int io_allowed;
+
+	atomic_inc(&mdev->local_cnt);
+	io_allowed = (mdev->state.disk >= mins);
+	if (!io_allowed)
+		put_ldev(mdev);
+	return io_allowed;
+}
+#else
+extern int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_state mins);
+#endif
+
+/* you must have an "get_ldev" reference */
+static inline void drbd_get_syncer_progress(struct drbd_conf *mdev,
+		unsigned long *bits_left, unsigned int *per_mil_done)
+{
+	/*
+	 * this is to break it at compile time when we change that
+	 * (we may feel 4TB maximum storage per drbd is not enough)
+	 */
+	typecheck(unsigned long, mdev->rs_total);
+
+	/* note: both rs_total and rs_left are in bits, i.e. in
+	 * units of BM_BLOCK_SIZE.
+	 * for the percentage, we don't care. */
+
+	*bits_left = drbd_bm_total_weight(mdev) - mdev->rs_failed;
+	/* >> 10 to prevent overflow,
+	 * +1 to prevent division by zero */
+	if (*bits_left > mdev->rs_total) {
+		/* doh. maybe a logic bug somewhere.
+		 * may also be just a race condition
+		 * between this and a disconnect during sync.
+		 * for now, just prevent in-kernel buffer overflow.
+		 */
+		smp_rmb();
+		dev_warn(DEV, "cs:%s rs_left=%lu > rs_total=%lu (rs_failed %lu)\n",
+				drbd_conn_str(mdev->state.conn),
+				*bits_left, mdev->rs_total, mdev->rs_failed);
+		*per_mil_done = 0;
+	} else {
+		/* make sure the calculation happens in long context */
+		unsigned long tmp = 1000UL -
+				(*bits_left >> 10)*1000UL
+				/ ((mdev->rs_total >> 10) + 1UL);
+		*per_mil_done = tmp;
+	}
+}
+
+
+/* this throttles on-the-fly application requests
+ * according to max_buffers settings;
+ * maybe re-implement using semaphores? */
+static inline int drbd_get_max_buffers(struct drbd_conf *mdev)
+{
+	int mxb = 1000000; /* arbitrary limit on open requests */
+	if (get_net_conf(mdev)) {
+		mxb = mdev->net_conf->max_buffers;
+		put_net_conf(mdev);
+	}
+	return mxb;
+}
+
+static inline int drbd_state_is_stable(union drbd_state s)
+{
+
+	/* DO NOT add a default clause, we want the compiler to warn us
+	 * for any newly introduced state we may have forgotten to add here */
+
+	switch ((enum drbd_conns)s.conn) {
+	/* new io only accepted when there is no connection, ... */
+	case C_STANDALONE:
+	case C_WF_CONNECTION:
+	/* ... or there is a well established connection. */
+	case C_CONNECTED:
+	case C_SYNC_SOURCE:
+	case C_SYNC_TARGET:
+	case C_VERIFY_S:
+	case C_VERIFY_T:
+	case C_PAUSED_SYNC_S:
+	case C_PAUSED_SYNC_T:
+		/* maybe stable, look at the disk state */
+		break;
+
+	/* no new io accepted during tansitional states
+	 * like handshake or teardown */
+	case C_DISCONNECTING:
+	case C_UNCONNECTED:
+	case C_TIMEOUT:
+	case C_BROKEN_PIPE:
+	case C_NETWORK_FAILURE:
+	case C_PROTOCOL_ERROR:
+	case C_TEAR_DOWN:
+	case C_WF_REPORT_PARAMS:
+	case C_STARTING_SYNC_S:
+	case C_STARTING_SYNC_T:
+	case C_WF_BITMAP_S:
+	case C_WF_BITMAP_T:
+	case C_WF_SYNC_UUID:
+	case C_MASK:
+		/* not "stable" */
+		return 0;
+	}
+
+	switch ((enum drbd_disk_state)s.disk) {
+	case D_DISKLESS:
+	case D_INCONSISTENT:
+	case D_OUTDATED:
+	case D_CONSISTENT:
+	case D_UP_TO_DATE:
+		/* disk state is stable as well. */
+		break;
+
+	/* no new io accepted during tansitional states */
+	case D_ATTACHING:
+	case D_FAILED:
+	case D_NEGOTIATING:
+	case D_UNKNOWN:
+	case D_MASK:
+		/* not "stable" */
+		return 0;
+	}
+
+	return 1;
+}
+
+static inline int __inc_ap_bio_cond(struct drbd_conf *mdev)
+{
+	int mxb = drbd_get_max_buffers(mdev);
+
+	if (mdev->state.susp)
+		return 0;
+	if (test_bit(SUSPEND_IO, &mdev->flags))
+		return 0;
+
+	/* to avoid potential deadlock or bitmap corruption,
+	 * in various places, we only allow new application io
+	 * to start during "stable" states. */
+
+	/* no new io accepted when attaching or detaching the disk */
+	if (!drbd_state_is_stable(mdev->state))
+		return 0;
+
+	/* since some older kernels don't have atomic_add_unless,
+	 * and we are within the spinlock anyways, we have this workaround.  */
+	if (atomic_read(&mdev->ap_bio_cnt) > mxb)
+		return 0;
+	if (test_bit(BITMAP_IO, &mdev->flags))
+		return 0;
+	return 1;
+}
+
+/* I'd like to use wait_event_lock_irq,
+ * but I'm not sure when it got introduced,
+ * and not sure when it has 3 or 4 arguments */
+static inline void inc_ap_bio(struct drbd_conf *mdev, int one_or_two)
+{
+	/* compare with after_state_ch,
+	 * os.conn != C_WF_BITMAP_S && ns.conn == C_WF_BITMAP_S */
+	DEFINE_WAIT(wait);
+
+	/* we wait here
+	 *    as long as the device is suspended
+	 *    until the bitmap is no longer on the fly during connection
+	 *    handshake as long as we would exeed the max_buffer limit.
+	 *
+	 * to avoid races with the reconnect code,
+	 * we need to atomic_inc within the spinlock. */
+
+	spin_lock_irq(&mdev->req_lock);
+	while (!__inc_ap_bio_cond(mdev)) {
+		prepare_to_wait(&mdev->misc_wait, &wait, TASK_UNINTERRUPTIBLE);
+		spin_unlock_irq(&mdev->req_lock);
+		schedule();
+		finish_wait(&mdev->misc_wait, &wait);
+		spin_lock_irq(&mdev->req_lock);
+	}
+	atomic_add(one_or_two, &mdev->ap_bio_cnt);
+	spin_unlock_irq(&mdev->req_lock);
+}
+
+static inline void dec_ap_bio(struct drbd_conf *mdev)
+{
+	int mxb = drbd_get_max_buffers(mdev);
+	int ap_bio = atomic_dec_return(&mdev->ap_bio_cnt);
+
+	D_ASSERT(ap_bio >= 0);
+	/* this currently does wake_up for every dec_ap_bio!
+	 * maybe rather introduce some type of hysteresis?
+	 * e.g. (ap_bio == mxb/2 || ap_bio == 0) ? */
+	if (ap_bio < mxb)
+		wake_up(&mdev->misc_wait);
+	if (ap_bio == 0 && test_bit(BITMAP_IO, &mdev->flags)) {
+		if (!test_and_set_bit(BITMAP_IO_QUEUED, &mdev->flags))
+			drbd_queue_work(&mdev->data.work, &mdev->bm_io_work.w);
+	}
+}
+
+static inline void drbd_set_ed_uuid(struct drbd_conf *mdev, u64 val)
+{
+	mdev->ed_uuid = val;
+}
+
+static inline int seq_cmp(u32 a, u32 b)
+{
+	/* we assume wrap around at 32bit.
+	 * for wrap around at 24bit (old atomic_t),
+	 * we'd have to
+	 *  a <<= 8; b <<= 8;
+	 */
+	return (s32)(a) - (s32)(b);
+}
+#define seq_lt(a, b) (seq_cmp((a), (b)) < 0)
+#define seq_gt(a, b) (seq_cmp((a), (b)) > 0)
+#define seq_ge(a, b) (seq_cmp((a), (b)) >= 0)
+#define seq_le(a, b) (seq_cmp((a), (b)) <= 0)
+/* CAUTION: please no side effects in arguments! */
+#define seq_max(a, b) ((u32)(seq_gt((a), (b)) ? (a) : (b)))
+
+static inline void update_peer_seq(struct drbd_conf *mdev, unsigned int new_seq)
+{
+	unsigned int m;
+	spin_lock(&mdev->peer_seq_lock);
+	m = seq_max(mdev->peer_seq, new_seq);
+	mdev->peer_seq = m;
+	spin_unlock(&mdev->peer_seq_lock);
+	if (m == new_seq)
+		wake_up(&mdev->seq_wait);
+}
+
+static inline void drbd_update_congested(struct drbd_conf *mdev)
+{
+	struct sock *sk = mdev->data.socket->sk;
+	if (sk->sk_wmem_queued > sk->sk_sndbuf * 4 / 5)
+		set_bit(NET_CONGESTED, &mdev->flags);
+}
+
+static inline int drbd_queue_order_type(struct drbd_conf *mdev)
+{
+	/* sorry, we currently have no working implementation
+	 * of distributed TCQ stuff */
+#ifndef QUEUE_ORDERED_NONE
+#define QUEUE_ORDERED_NONE 0
+#endif
+	return QUEUE_ORDERED_NONE;
+}
+
+static inline void drbd_blk_run_queue(struct request_queue *q)
+{
+	if (q && q->unplug_fn)
+		q->unplug_fn(q);
+}
+
+static inline void drbd_kick_lo(struct drbd_conf *mdev)
+{
+	if (get_ldev(mdev)) {
+		drbd_blk_run_queue(bdev_get_queue(mdev->ldev->backing_bdev));
+		put_ldev(mdev);
+	}
+}
+
+static inline void drbd_md_flush(struct drbd_conf *mdev)
+{
+	int r;
+
+	if (test_bit(MD_NO_BARRIER, &mdev->flags))
+		return;
+
+	r = blkdev_issue_flush(mdev->ldev->md_bdev, NULL);
+	if (r) {
+		set_bit(MD_NO_BARRIER, &mdev->flags);
+		dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r);
+	}
+}
+
+#endif
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
new file mode 100644
index 0000000..157d1e4
--- /dev/null
+++ b/drivers/block/drbd/drbd_main.c
@@ -0,0 +1,3699 @@
+/*
+   drbd.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   Thanks to Carter Burden, Bart Grantham and Gennadiy Nerubayev
+   from Logicworks, Inc. for making SDP replication support possible.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/drbd.h>
+#include <asm/uaccess.h>
+#include <asm/types.h>
+#include <net/sock.h>
+#include <linux/ctype.h>
+#include <linux/smp_lock.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
+#include <linux/mm_inline.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/reboot.h>
+#include <linux/notifier.h>
+#include <linux/kthread.h>
+
+#define __KERNEL_SYSCALLS__
+#include <linux/unistd.h>
+#include <linux/vmalloc.h>
+
+#include <linux/drbd_limits.h>
+#include "drbd_int.h"
+#include "drbd_req.h" /* only for _req_mod in tl_release and tl_clear */
+
+#include "drbd_vli.h"
+
+struct after_state_chg_work {
+	struct drbd_work w;
+	union drbd_state os;
+	union drbd_state ns;
+	enum chg_state_flags flags;
+	struct completion *done;
+};
+
+int drbdd_init(struct drbd_thread *);
+int drbd_worker(struct drbd_thread *);
+int drbd_asender(struct drbd_thread *);
+
+int drbd_init(void);
+static int drbd_open(struct block_device *bdev, fmode_t mode);
+static int drbd_release(struct gendisk *gd, fmode_t mode);
+static int w_after_state_ch(struct drbd_conf *mdev, struct drbd_work *w, int unused);
+static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
+			   union drbd_state ns, enum chg_state_flags flags);
+static int w_md_sync(struct drbd_conf *mdev, struct drbd_work *w, int unused);
+static void md_sync_timer_fn(unsigned long data);
+static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused);
+
+MODULE_AUTHOR("Philipp Reisner <phil@linbit.com>, "
+	      "Lars Ellenberg <lars@linbit.com>");
+MODULE_DESCRIPTION("drbd - Distributed Replicated Block Device v" REL_VERSION);
+MODULE_VERSION(REL_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_PARM_DESC(minor_count, "Maximum number of drbd devices (1-255)");
+MODULE_ALIAS_BLOCKDEV_MAJOR(DRBD_MAJOR);
+
+#include <linux/moduleparam.h>
+/* allow_open_on_secondary */
+MODULE_PARM_DESC(allow_oos, "DONT USE!");
+/* thanks to these macros, if compiled into the kernel (not-module),
+ * this becomes the boot parameter drbd.minor_count */
+module_param(minor_count, uint, 0444);
+module_param(disable_sendpage, bool, 0644);
+module_param(allow_oos, bool, 0);
+module_param(cn_idx, uint, 0444);
+module_param(proc_details, int, 0644);
+
+#ifdef CONFIG_DRBD_FAULT_INJECTION
+int enable_faults;
+int fault_rate;
+static int fault_count;
+int fault_devs;
+/* bitmap of enabled faults */
+module_param(enable_faults, int, 0664);
+/* fault rate % value - applies to all enabled faults */
+module_param(fault_rate, int, 0664);
+/* count of faults inserted */
+module_param(fault_count, int, 0664);
+/* bitmap of devices to insert faults on */
+module_param(fault_devs, int, 0644);
+#endif
+
+/* module parameter, defined */
+unsigned int minor_count = 32;
+int disable_sendpage;
+int allow_oos;
+unsigned int cn_idx = CN_IDX_DRBD;
+int proc_details;       /* Detail level in proc drbd*/
+
+/* Module parameter for setting the user mode helper program
+ * to run. Default is /sbin/drbdadm */
+char usermode_helper[80] = "/sbin/drbdadm";
+
+module_param_string(usermode_helper, usermode_helper, sizeof(usermode_helper), 0644);
+
+/* in 2.6.x, our device mapping and config info contains our virtual gendisks
+ * as member "struct gendisk *vdisk;"
+ */
+struct drbd_conf **minor_table;
+
+struct kmem_cache *drbd_request_cache;
+struct kmem_cache *drbd_ee_cache;	/* epoch entries */
+struct kmem_cache *drbd_bm_ext_cache;	/* bitmap extents */
+struct kmem_cache *drbd_al_ext_cache;	/* activity log extents */
+mempool_t *drbd_request_mempool;
+mempool_t *drbd_ee_mempool;
+
+/* I do not use a standard mempool, because:
+   1) I want to hand out the pre-allocated objects first.
+   2) I want to be able to interrupt sleeping allocation with a signal.
+   Note: This is a single linked list, the next pointer is the private
+	 member of struct page.
+ */
+struct page *drbd_pp_pool;
+spinlock_t   drbd_pp_lock;
+int          drbd_pp_vacant;
+wait_queue_head_t drbd_pp_wait;
+
+DEFINE_RATELIMIT_STATE(drbd_ratelimit_state, 5 * HZ, 5);
+
+static struct block_device_operations drbd_ops = {
+	.owner =   THIS_MODULE,
+	.open =    drbd_open,
+	.release = drbd_release,
+};
+
+#define ARRY_SIZE(A) (sizeof(A)/sizeof(A[0]))
+
+#ifdef __CHECKER__
+/* When checking with sparse, and this is an inline function, sparse will
+   give tons of false positives. When this is a real functions sparse works.
+ */
+int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_state mins)
+{
+	int io_allowed;
+
+	atomic_inc(&mdev->local_cnt);
+	io_allowed = (mdev->state.disk >= mins);
+	if (!io_allowed) {
+		if (atomic_dec_and_test(&mdev->local_cnt))
+			wake_up(&mdev->misc_wait);
+	}
+	return io_allowed;
+}
+
+#endif
+
+/**
+ * DOC: The transfer log
+ *
+ * The transfer log is a single linked list of &struct drbd_tl_epoch objects.
+ * mdev->newest_tle points to the head, mdev->oldest_tle points to the tail
+ * of the list. There is always at least one &struct drbd_tl_epoch object.
+ *
+ * Each &struct drbd_tl_epoch has a circular double linked list of requests
+ * attached.
+ */
+static int tl_init(struct drbd_conf *mdev)
+{
+	struct drbd_tl_epoch *b;
+
+	/* during device minor initialization, we may well use GFP_KERNEL */
+	b = kmalloc(sizeof(struct drbd_tl_epoch), GFP_KERNEL);
+	if (!b)
+		return 0;
+	INIT_LIST_HEAD(&b->requests);
+	INIT_LIST_HEAD(&b->w.list);
+	b->next = NULL;
+	b->br_number = 4711;
+	b->n_req = 0;
+	b->w.cb = NULL; /* if this is != NULL, we need to dec_ap_pending in tl_clear */
+
+	mdev->oldest_tle = b;
+	mdev->newest_tle = b;
+	INIT_LIST_HEAD(&mdev->out_of_sequence_requests);
+
+	mdev->tl_hash = NULL;
+	mdev->tl_hash_s = 0;
+
+	return 1;
+}
+
+static void tl_cleanup(struct drbd_conf *mdev)
+{
+	D_ASSERT(mdev->oldest_tle == mdev->newest_tle);
+	D_ASSERT(list_empty(&mdev->out_of_sequence_requests));
+	kfree(mdev->oldest_tle);
+	mdev->oldest_tle = NULL;
+	kfree(mdev->unused_spare_tle);
+	mdev->unused_spare_tle = NULL;
+	kfree(mdev->tl_hash);
+	mdev->tl_hash = NULL;
+	mdev->tl_hash_s = 0;
+}
+
+/**
+ * _tl_add_barrier() - Adds a barrier to the transfer log
+ * @mdev:	DRBD device.
+ * @new:	Barrier to be added before the current head of the TL.
+ *
+ * The caller must hold the req_lock.
+ */
+void _tl_add_barrier(struct drbd_conf *mdev, struct drbd_tl_epoch *new)
+{
+	struct drbd_tl_epoch *newest_before;
+
+	INIT_LIST_HEAD(&new->requests);
+	INIT_LIST_HEAD(&new->w.list);
+	new->w.cb = NULL; /* if this is != NULL, we need to dec_ap_pending in tl_clear */
+	new->next = NULL;
+	new->n_req = 0;
+
+	newest_before = mdev->newest_tle;
+	/* never send a barrier number == 0, because that is special-cased
+	 * when using TCQ for our write ordering code */
+	new->br_number = (newest_before->br_number+1) ?: 1;
+	if (mdev->newest_tle != new) {
+		mdev->newest_tle->next = new;
+		mdev->newest_tle = new;
+	}
+}
+
+/**
+ * tl_release() - Free or recycle the oldest &struct drbd_tl_epoch object of the TL
+ * @mdev:	DRBD device.
+ * @barrier_nr:	Expected identifier of the DRBD write barrier packet.
+ * @set_size:	Expected number of requests before that barrier.
+ *
+ * In case the passed barrier_nr or set_size does not match the oldest
+ * &struct drbd_tl_epoch objects this function will cause a termination
+ * of the connection.
+ */
+void tl_release(struct drbd_conf *mdev, unsigned int barrier_nr,
+		       unsigned int set_size)
+{
+	struct drbd_tl_epoch *b, *nob; /* next old barrier */
+	struct list_head *le, *tle;
+	struct drbd_request *r;
+
+	spin_lock_irq(&mdev->req_lock);
+
+	b = mdev->oldest_tle;
+
+	/* first some paranoia code */
+	if (b == NULL) {
+		dev_err(DEV, "BAD! BarrierAck #%u received, but no epoch in tl!?\n",
+			barrier_nr);
+		goto bail;
+	}
+	if (b->br_number != barrier_nr) {
+		dev_err(DEV, "BAD! BarrierAck #%u received, expected #%u!\n",
+			barrier_nr, b->br_number);
+		goto bail;
+	}
+	if (b->n_req != set_size) {
+		dev_err(DEV, "BAD! BarrierAck #%u received with n_req=%u, expected n_req=%u!\n",
+			barrier_nr, set_size, b->n_req);
+		goto bail;
+	}
+
+	/* Clean up list of requests processed during current epoch */
+	list_for_each_safe(le, tle, &b->requests) {
+		r = list_entry(le, struct drbd_request, tl_requests);
+		_req_mod(r, barrier_acked);
+	}
+	/* There could be requests on the list waiting for completion
+	   of the write to the local disk. To avoid corruptions of
+	   slab's data structures we have to remove the lists head.
+
+	   Also there could have been a barrier ack out of sequence, overtaking
+	   the write acks - which would be a bug and violating write ordering.
+	   To not deadlock in case we lose connection while such requests are
+	   still pending, we need some way to find them for the
+	   _req_mode(connection_lost_while_pending).
+
+	   These have been list_move'd to the out_of_sequence_requests list in
+	   _req_mod(, barrier_acked) above.
+	   */
+	list_del_init(&b->requests);
+
+	nob = b->next;
+	if (test_and_clear_bit(CREATE_BARRIER, &mdev->flags)) {
+		_tl_add_barrier(mdev, b);
+		if (nob)
+			mdev->oldest_tle = nob;
+		/* if nob == NULL b was the only barrier, and becomes the new
+		   barrier. Therefore mdev->oldest_tle points already to b */
+	} else {
+		D_ASSERT(nob != NULL);
+		mdev->oldest_tle = nob;
+		kfree(b);
+	}
+
+	spin_unlock_irq(&mdev->req_lock);
+	dec_ap_pending(mdev);
+
+	return;
+
+bail:
+	spin_unlock_irq(&mdev->req_lock);
+	drbd_force_state(mdev, NS(conn, C_PROTOCOL_ERROR));
+}
+
+
+/**
+ * tl_clear() - Clears all requests and &struct drbd_tl_epoch objects out of the TL
+ * @mdev:	DRBD device.
+ *
+ * This is called after the connection to the peer was lost. The storage covered
+ * by the requests on the transfer gets marked as our of sync. Called from the
+ * receiver thread and the worker thread.
+ */
+void tl_clear(struct drbd_conf *mdev)
+{
+	struct drbd_tl_epoch *b, *tmp;
+	struct list_head *le, *tle;
+	struct drbd_request *r;
+	int new_initial_bnr = net_random();
+
+	spin_lock_irq(&mdev->req_lock);
+
+	b = mdev->oldest_tle;
+	while (b) {
+		list_for_each_safe(le, tle, &b->requests) {
+			r = list_entry(le, struct drbd_request, tl_requests);
+			/* It would be nice to complete outside of spinlock.
+			 * But this is easier for now. */
+			_req_mod(r, connection_lost_while_pending);
+		}
+		tmp = b->next;
+
+		/* there could still be requests on that ring list,
+		 * in case local io is still pending */
+		list_del(&b->requests);
+
+		/* dec_ap_pending corresponding to queue_barrier.
+		 * the newest barrier may not have been queued yet,
+		 * in which case w.cb is still NULL. */
+		if (b->w.cb != NULL)
+			dec_ap_pending(mdev);
+
+		if (b == mdev->newest_tle) {
+			/* recycle, but reinit! */
+			D_ASSERT(tmp == NULL);
+			INIT_LIST_HEAD(&b->requests);
+			INIT_LIST_HEAD(&b->w.list);
+			b->w.cb = NULL;
+			b->br_number = new_initial_bnr;
+			b->n_req = 0;
+
+			mdev->oldest_tle = b;
+			break;
+		}
+		kfree(b);
+		b = tmp;
+	}
+
+	/* we expect this list to be empty. */
+	D_ASSERT(list_empty(&mdev->out_of_sequence_requests));
+
+	/* but just in case, clean it up anyways! */
+	list_for_each_safe(le, tle, &mdev->out_of_sequence_requests) {
+		r = list_entry(le, struct drbd_request, tl_requests);
+		/* It would be nice to complete outside of spinlock.
+		 * But this is easier for now. */
+		_req_mod(r, connection_lost_while_pending);
+	}
+
+	/* ensure bit indicating barrier is required is clear */
+	clear_bit(CREATE_BARRIER, &mdev->flags);
+
+	spin_unlock_irq(&mdev->req_lock);
+}
+
+/**
+ * cl_wide_st_chg() - TRUE if the state change is a cluster wide one
+ * @mdev:	DRBD device.
+ * @os:		old (current) state.
+ * @ns:		new (wanted) state.
+ */
+static int cl_wide_st_chg(struct drbd_conf *mdev,
+			  union drbd_state os, union drbd_state ns)
+{
+	return (os.conn >= C_CONNECTED && ns.conn >= C_CONNECTED &&
+		 ((os.role != R_PRIMARY && ns.role == R_PRIMARY) ||
+		  (os.conn != C_STARTING_SYNC_T && ns.conn == C_STARTING_SYNC_T) ||
+		  (os.conn != C_STARTING_SYNC_S && ns.conn == C_STARTING_SYNC_S) ||
+		  (os.disk != D_DISKLESS && ns.disk == D_DISKLESS))) ||
+		(os.conn >= C_CONNECTED && ns.conn == C_DISCONNECTING) ||
+		(os.conn == C_CONNECTED && ns.conn == C_VERIFY_S);
+}
+
+int drbd_change_state(struct drbd_conf *mdev, enum chg_state_flags f,
+		      union drbd_state mask, union drbd_state val)
+{
+	unsigned long flags;
+	union drbd_state os, ns;
+	int rv;
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	os = mdev->state;
+	ns.i = (os.i & ~mask.i) | val.i;
+	rv = _drbd_set_state(mdev, ns, f, NULL);
+	ns = mdev->state;
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	return rv;
+}
+
+/**
+ * drbd_force_state() - Impose a change which happens outside our control on our state
+ * @mdev:	DRBD device.
+ * @mask:	mask of state bits to change.
+ * @val:	value of new state bits.
+ */
+void drbd_force_state(struct drbd_conf *mdev,
+	union drbd_state mask, union drbd_state val)
+{
+	drbd_change_state(mdev, CS_HARD, mask, val);
+}
+
+static int is_valid_state(struct drbd_conf *mdev, union drbd_state ns);
+static int is_valid_state_transition(struct drbd_conf *,
+				     union drbd_state, union drbd_state);
+static union drbd_state sanitize_state(struct drbd_conf *mdev, union drbd_state os,
+				       union drbd_state ns, int *warn_sync_abort);
+int drbd_send_state_req(struct drbd_conf *,
+			union drbd_state, union drbd_state);
+
+static enum drbd_state_ret_codes _req_st_cond(struct drbd_conf *mdev,
+				    union drbd_state mask, union drbd_state val)
+{
+	union drbd_state os, ns;
+	unsigned long flags;
+	int rv;
+
+	if (test_and_clear_bit(CL_ST_CHG_SUCCESS, &mdev->flags))
+		return SS_CW_SUCCESS;
+
+	if (test_and_clear_bit(CL_ST_CHG_FAIL, &mdev->flags))
+		return SS_CW_FAILED_BY_PEER;
+
+	rv = 0;
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	os = mdev->state;
+	ns.i = (os.i & ~mask.i) | val.i;
+	ns = sanitize_state(mdev, os, ns, NULL);
+
+	if (!cl_wide_st_chg(mdev, os, ns))
+		rv = SS_CW_NO_NEED;
+	if (!rv) {
+		rv = is_valid_state(mdev, ns);
+		if (rv == SS_SUCCESS) {
+			rv = is_valid_state_transition(mdev, ns, os);
+			if (rv == SS_SUCCESS)
+				rv = 0; /* cont waiting, otherwise fail. */
+		}
+	}
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	return rv;
+}
+
+/**
+ * drbd_req_state() - Perform an eventually cluster wide state change
+ * @mdev:	DRBD device.
+ * @mask:	mask of state bits to change.
+ * @val:	value of new state bits.
+ * @f:		flags
+ *
+ * Should not be called directly, use drbd_request_state() or
+ * _drbd_request_state().
+ */
+static int drbd_req_state(struct drbd_conf *mdev,
+			  union drbd_state mask, union drbd_state val,
+			  enum chg_state_flags f)
+{
+	struct completion done;
+	unsigned long flags;
+	union drbd_state os, ns;
+	int rv;
+
+	init_completion(&done);
+
+	if (f & CS_SERIALIZE)
+		mutex_lock(&mdev->state_mutex);
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	os = mdev->state;
+	ns.i = (os.i & ~mask.i) | val.i;
+	ns = sanitize_state(mdev, os, ns, NULL);
+
+	if (cl_wide_st_chg(mdev, os, ns)) {
+		rv = is_valid_state(mdev, ns);
+		if (rv == SS_SUCCESS)
+			rv = is_valid_state_transition(mdev, ns, os);
+		spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+		if (rv < SS_SUCCESS) {
+			if (f & CS_VERBOSE)
+				print_st_err(mdev, os, ns, rv);
+			goto abort;
+		}
+
+		drbd_state_lock(mdev);
+		if (!drbd_send_state_req(mdev, mask, val)) {
+			drbd_state_unlock(mdev);
+			rv = SS_CW_FAILED_BY_PEER;
+			if (f & CS_VERBOSE)
+				print_st_err(mdev, os, ns, rv);
+			goto abort;
+		}
+
+		wait_event(mdev->state_wait,
+			(rv = _req_st_cond(mdev, mask, val)));
+
+		if (rv < SS_SUCCESS) {
+			drbd_state_unlock(mdev);
+			if (f & CS_VERBOSE)
+				print_st_err(mdev, os, ns, rv);
+			goto abort;
+		}
+		spin_lock_irqsave(&mdev->req_lock, flags);
+		os = mdev->state;
+		ns.i = (os.i & ~mask.i) | val.i;
+		rv = _drbd_set_state(mdev, ns, f, &done);
+		drbd_state_unlock(mdev);
+	} else {
+		rv = _drbd_set_state(mdev, ns, f, &done);
+	}
+
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	if (f & CS_WAIT_COMPLETE && rv == SS_SUCCESS) {
+		D_ASSERT(current != mdev->worker.task);
+		wait_for_completion(&done);
+	}
+
+abort:
+	if (f & CS_SERIALIZE)
+		mutex_unlock(&mdev->state_mutex);
+
+	return rv;
+}
+
+/**
+ * _drbd_request_state() - Request a state change (with flags)
+ * @mdev:	DRBD device.
+ * @mask:	mask of state bits to change.
+ * @val:	value of new state bits.
+ * @f:		flags
+ *
+ * Cousin of drbd_request_state(), useful with the CS_WAIT_COMPLETE
+ * flag, or when logging of failed state change requests is not desired.
+ */
+int _drbd_request_state(struct drbd_conf *mdev,	union drbd_state mask,
+			union drbd_state val,	enum chg_state_flags f)
+{
+	int rv;
+
+	wait_event(mdev->state_wait,
+		   (rv = drbd_req_state(mdev, mask, val, f)) != SS_IN_TRANSIENT_STATE);
+
+	return rv;
+}
+
+static void print_st(struct drbd_conf *mdev, char *name, union drbd_state ns)
+{
+	dev_err(DEV, " %s = { cs:%s ro:%s/%s ds:%s/%s %c%c%c%c }\n",
+	    name,
+	    drbd_conn_str(ns.conn),
+	    drbd_role_str(ns.role),
+	    drbd_role_str(ns.peer),
+	    drbd_disk_str(ns.disk),
+	    drbd_disk_str(ns.pdsk),
+	    ns.susp ? 's' : 'r',
+	    ns.aftr_isp ? 'a' : '-',
+	    ns.peer_isp ? 'p' : '-',
+	    ns.user_isp ? 'u' : '-'
+	    );
+}
+
+void print_st_err(struct drbd_conf *mdev,
+	union drbd_state os, union drbd_state ns, int err)
+{
+	if (err == SS_IN_TRANSIENT_STATE)
+		return;
+	dev_err(DEV, "State change failed: %s\n", drbd_set_st_err_str(err));
+	print_st(mdev, " state", os);
+	print_st(mdev, "wanted", ns);
+}
+
+
+#define drbd_peer_str drbd_role_str
+#define drbd_pdsk_str drbd_disk_str
+
+#define drbd_susp_str(A)     ((A) ? "1" : "0")
+#define drbd_aftr_isp_str(A) ((A) ? "1" : "0")
+#define drbd_peer_isp_str(A) ((A) ? "1" : "0")
+#define drbd_user_isp_str(A) ((A) ? "1" : "0")
+
+#define PSC(A) \
+	({ if (ns.A != os.A) { \
+		pbp += sprintf(pbp, #A "( %s -> %s ) ", \
+			      drbd_##A##_str(os.A), \
+			      drbd_##A##_str(ns.A)); \
+	} })
+
+/**
+ * is_valid_state() - Returns an SS_ error code if ns is not valid
+ * @mdev:	DRBD device.
+ * @ns:		State to consider.
+ */
+static int is_valid_state(struct drbd_conf *mdev, union drbd_state ns)
+{
+	/* See drbd_state_sw_errors in drbd_strings.c */
+
+	enum drbd_fencing_p fp;
+	int rv = SS_SUCCESS;
+
+	fp = FP_DONT_CARE;
+	if (get_ldev(mdev)) {
+		fp = mdev->ldev->dc.fencing;
+		put_ldev(mdev);
+	}
+
+	if (get_net_conf(mdev)) {
+		if (!mdev->net_conf->two_primaries &&
+		    ns.role == R_PRIMARY && ns.peer == R_PRIMARY)
+			rv = SS_TWO_PRIMARIES;
+		put_net_conf(mdev);
+	}
+
+	if (rv <= 0)
+		/* already found a reason to abort */;
+	else if (ns.role == R_SECONDARY && mdev->open_cnt)
+		rv = SS_DEVICE_IN_USE;
+
+	else if (ns.role == R_PRIMARY && ns.conn < C_CONNECTED && ns.disk < D_UP_TO_DATE)
+		rv = SS_NO_UP_TO_DATE_DISK;
+
+	else if (fp >= FP_RESOURCE &&
+		 ns.role == R_PRIMARY && ns.conn < C_CONNECTED && ns.pdsk >= D_UNKNOWN)
+		rv = SS_PRIMARY_NOP;
+
+	else if (ns.role == R_PRIMARY && ns.disk <= D_INCONSISTENT && ns.pdsk <= D_INCONSISTENT)
+		rv = SS_NO_UP_TO_DATE_DISK;
+
+	else if (ns.conn > C_CONNECTED && ns.disk < D_INCONSISTENT)
+		rv = SS_NO_LOCAL_DISK;
+
+	else if (ns.conn > C_CONNECTED && ns.pdsk < D_INCONSISTENT)
+		rv = SS_NO_REMOTE_DISK;
+
+	else if ((ns.conn == C_CONNECTED ||
+		  ns.conn == C_WF_BITMAP_S ||
+		  ns.conn == C_SYNC_SOURCE ||
+		  ns.conn == C_PAUSED_SYNC_S) &&
+		  ns.disk == D_OUTDATED)
+		rv = SS_CONNECTED_OUTDATES;
+
+	else if ((ns.conn == C_VERIFY_S || ns.conn == C_VERIFY_T) &&
+		 (mdev->sync_conf.verify_alg[0] == 0))
+		rv = SS_NO_VERIFY_ALG;
+
+	else if ((ns.conn == C_VERIFY_S || ns.conn == C_VERIFY_T) &&
+		  mdev->agreed_pro_version < 88)
+		rv = SS_NOT_SUPPORTED;
+
+	return rv;
+}
+
+/**
+ * is_valid_state_transition() - Returns an SS_ error code if the state transition is not possible
+ * @mdev:	DRBD device.
+ * @ns:		new state.
+ * @os:		old state.
+ */
+static int is_valid_state_transition(struct drbd_conf *mdev,
+				     union drbd_state ns, union drbd_state os)
+{
+	int rv = SS_SUCCESS;
+
+	if ((ns.conn == C_STARTING_SYNC_T || ns.conn == C_STARTING_SYNC_S) &&
+	    os.conn > C_CONNECTED)
+		rv = SS_RESYNC_RUNNING;
+
+	if (ns.conn == C_DISCONNECTING && os.conn == C_STANDALONE)
+		rv = SS_ALREADY_STANDALONE;
+
+	if (ns.disk > D_ATTACHING && os.disk == D_DISKLESS)
+		rv = SS_IS_DISKLESS;
+
+	if (ns.conn == C_WF_CONNECTION && os.conn < C_UNCONNECTED)
+		rv = SS_NO_NET_CONFIG;
+
+	if (ns.disk == D_OUTDATED && os.disk < D_OUTDATED && os.disk != D_ATTACHING)
+		rv = SS_LOWER_THAN_OUTDATED;
+
+	if (ns.conn == C_DISCONNECTING && os.conn == C_UNCONNECTED)
+		rv = SS_IN_TRANSIENT_STATE;
+
+	if (ns.conn == os.conn && ns.conn == C_WF_REPORT_PARAMS)
+		rv = SS_IN_TRANSIENT_STATE;
+
+	if ((ns.conn == C_VERIFY_S || ns.conn == C_VERIFY_T) && os.conn < C_CONNECTED)
+		rv = SS_NEED_CONNECTION;
+
+	if ((ns.conn == C_VERIFY_S || ns.conn == C_VERIFY_T) &&
+	    ns.conn != os.conn && os.conn > C_CONNECTED)
+		rv = SS_RESYNC_RUNNING;
+
+	if ((ns.conn == C_STARTING_SYNC_S || ns.conn == C_STARTING_SYNC_T) &&
+	    os.conn < C_CONNECTED)
+		rv = SS_NEED_CONNECTION;
+
+	return rv;
+}
+
+/**
+ * sanitize_state() - Resolves implicitly necessary additional changes to a state transition
+ * @mdev:	DRBD device.
+ * @os:		old state.
+ * @ns:		new state.
+ * @warn_sync_abort:
+ *
+ * When we loose connection, we have to set the state of the peers disk (pdsk)
+ * to D_UNKNOWN. This rule and many more along those lines are in this function.
+ */
+static union drbd_state sanitize_state(struct drbd_conf *mdev, union drbd_state os,
+				       union drbd_state ns, int *warn_sync_abort)
+{
+	enum drbd_fencing_p fp;
+
+	fp = FP_DONT_CARE;
+	if (get_ldev(mdev)) {
+		fp = mdev->ldev->dc.fencing;
+		put_ldev(mdev);
+	}
+
+	/* Disallow Network errors to configure a device's network part */
+	if ((ns.conn >= C_TIMEOUT && ns.conn <= C_TEAR_DOWN) &&
+	    os.conn <= C_DISCONNECTING)
+		ns.conn = os.conn;
+
+	/* After a network error (+C_TEAR_DOWN) only C_UNCONNECTED or C_DISCONNECTING can follow */
+	if (os.conn >= C_TIMEOUT && os.conn <= C_TEAR_DOWN &&
+	    ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING)
+		ns.conn = os.conn;
+
+	/* After C_DISCONNECTING only C_STANDALONE may follow */
+	if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE)
+		ns.conn = os.conn;
+
+	if (ns.conn < C_CONNECTED) {
+		ns.peer_isp = 0;
+		ns.peer = R_UNKNOWN;
+		if (ns.pdsk > D_UNKNOWN || ns.pdsk < D_INCONSISTENT)
+			ns.pdsk = D_UNKNOWN;
+	}
+
+	/* Clear the aftr_isp when becoming unconfigured */
+	if (ns.conn == C_STANDALONE && ns.disk == D_DISKLESS && ns.role == R_SECONDARY)
+		ns.aftr_isp = 0;
+
+	if (ns.conn <= C_DISCONNECTING && ns.disk == D_DISKLESS)
+		ns.pdsk = D_UNKNOWN;
+
+	/* Abort resync if a disk fails/detaches */
+	if (os.conn > C_CONNECTED && ns.conn > C_CONNECTED &&
+	    (ns.disk <= D_FAILED || ns.pdsk <= D_FAILED)) {
+		if (warn_sync_abort)
+			*warn_sync_abort = 1;
+		ns.conn = C_CONNECTED;
+	}
+
+	if (ns.conn >= C_CONNECTED &&
+	    ((ns.disk == D_CONSISTENT || ns.disk == D_OUTDATED) ||
+	     (ns.disk == D_NEGOTIATING && ns.conn == C_WF_BITMAP_T))) {
+		switch (ns.conn) {
+		case C_WF_BITMAP_T:
+		case C_PAUSED_SYNC_T:
+			ns.disk = D_OUTDATED;
+			break;
+		case C_CONNECTED:
+		case C_WF_BITMAP_S:
+		case C_SYNC_SOURCE:
+		case C_PAUSED_SYNC_S:
+			ns.disk = D_UP_TO_DATE;
+			break;
+		case C_SYNC_TARGET:
+			ns.disk = D_INCONSISTENT;
+			dev_warn(DEV, "Implicitly set disk state Inconsistent!\n");
+			break;
+		}
+		if (os.disk == D_OUTDATED && ns.disk == D_UP_TO_DATE)
+			dev_warn(DEV, "Implicitly set disk from Outdated to UpToDate\n");
+	}
+
+	if (ns.conn >= C_CONNECTED &&
+	    (ns.pdsk == D_CONSISTENT || ns.pdsk == D_OUTDATED)) {
+		switch (ns.conn) {
+		case C_CONNECTED:
+		case C_WF_BITMAP_T:
+		case C_PAUSED_SYNC_T:
+		case C_SYNC_TARGET:
+			ns.pdsk = D_UP_TO_DATE;
+			break;
+		case C_WF_BITMAP_S:
+		case C_PAUSED_SYNC_S:
+			ns.pdsk = D_OUTDATED;
+			break;
+		case C_SYNC_SOURCE:
+			ns.pdsk = D_INCONSISTENT;
+			dev_warn(DEV, "Implicitly set pdsk Inconsistent!\n");
+			break;
+		}
+		if (os.pdsk == D_OUTDATED && ns.pdsk == D_UP_TO_DATE)
+			dev_warn(DEV, "Implicitly set pdsk from Outdated to UpToDate\n");
+	}
+
+	/* Connection breaks down before we finished "Negotiating" */
+	if (ns.conn < C_CONNECTED && ns.disk == D_NEGOTIATING &&
+	    get_ldev_if_state(mdev, D_NEGOTIATING)) {
+		if (mdev->ed_uuid == mdev->ldev->md.uuid[UI_CURRENT]) {
+			ns.disk = mdev->new_state_tmp.disk;
+			ns.pdsk = mdev->new_state_tmp.pdsk;
+		} else {
+			dev_alert(DEV, "Connection lost while negotiating, no data!\n");
+			ns.disk = D_DISKLESS;
+			ns.pdsk = D_UNKNOWN;
+		}
+		put_ldev(mdev);
+	}
+
+	if (fp == FP_STONITH &&
+	    (ns.role == R_PRIMARY && ns.conn < C_CONNECTED && ns.pdsk > D_OUTDATED) &&
+	    !(os.role == R_PRIMARY && os.conn < C_CONNECTED && os.pdsk > D_OUTDATED))
+		ns.susp = 1;
+
+	if (ns.aftr_isp || ns.peer_isp || ns.user_isp) {
+		if (ns.conn == C_SYNC_SOURCE)
+			ns.conn = C_PAUSED_SYNC_S;
+		if (ns.conn == C_SYNC_TARGET)
+			ns.conn = C_PAUSED_SYNC_T;
+	} else {
+		if (ns.conn == C_PAUSED_SYNC_S)
+			ns.conn = C_SYNC_SOURCE;
+		if (ns.conn == C_PAUSED_SYNC_T)
+			ns.conn = C_SYNC_TARGET;
+	}
+
+	return ns;
+}
+
+/* helper for __drbd_set_state */
+static void set_ov_position(struct drbd_conf *mdev, enum drbd_conns cs)
+{
+	if (cs == C_VERIFY_T) {
+		/* starting online verify from an arbitrary position
+		 * does not fit well into the existing protocol.
+		 * on C_VERIFY_T, we initialize ov_left and friends
+		 * implicitly in receive_DataRequest once the
+		 * first P_OV_REQUEST is received */
+		mdev->ov_start_sector = ~(sector_t)0;
+	} else {
+		unsigned long bit = BM_SECT_TO_BIT(mdev->ov_start_sector);
+		if (bit >= mdev->rs_total)
+			mdev->ov_start_sector =
+				BM_BIT_TO_SECT(mdev->rs_total - 1);
+		mdev->ov_position = mdev->ov_start_sector;
+	}
+}
+
+/**
+ * __drbd_set_state() - Set a new DRBD state
+ * @mdev:	DRBD device.
+ * @ns:		new state.
+ * @flags:	Flags
+ * @done:	Optional completion, that will get completed after the after_state_ch() finished
+ *
+ * Caller needs to hold req_lock, and global_state_lock. Do not call directly.
+ */
+int __drbd_set_state(struct drbd_conf *mdev,
+		    union drbd_state ns, enum chg_state_flags flags,
+		    struct completion *done)
+{
+	union drbd_state os;
+	int rv = SS_SUCCESS;
+	int warn_sync_abort = 0;
+	struct after_state_chg_work *ascw;
+
+	os = mdev->state;
+
+	ns = sanitize_state(mdev, os, ns, &warn_sync_abort);
+
+	if (ns.i == os.i)
+		return SS_NOTHING_TO_DO;
+
+	if (!(flags & CS_HARD)) {
+		/*  pre-state-change checks ; only look at ns  */
+		/* See drbd_state_sw_errors in drbd_strings.c */
+
+		rv = is_valid_state(mdev, ns);
+		if (rv < SS_SUCCESS) {
+			/* If the old state was illegal as well, then let
+			   this happen...*/
+
+			if (is_valid_state(mdev, os) == rv) {
+				dev_err(DEV, "Considering state change from bad state. "
+				    "Error would be: '%s'\n",
+				    drbd_set_st_err_str(rv));
+				print_st(mdev, "old", os);
+				print_st(mdev, "new", ns);
+				rv = is_valid_state_transition(mdev, ns, os);
+			}
+		} else
+			rv = is_valid_state_transition(mdev, ns, os);
+	}
+
+	if (rv < SS_SUCCESS) {
+		if (flags & CS_VERBOSE)
+			print_st_err(mdev, os, ns, rv);
+		return rv;
+	}
+
+	if (warn_sync_abort)
+		dev_warn(DEV, "Resync aborted.\n");
+
+	{
+		char *pbp, pb[300];
+		pbp = pb;
+		*pbp = 0;
+		PSC(role);
+		PSC(peer);
+		PSC(conn);
+		PSC(disk);
+		PSC(pdsk);
+		PSC(susp);
+		PSC(aftr_isp);
+		PSC(peer_isp);
+		PSC(user_isp);
+		dev_info(DEV, "%s\n", pb);
+	}
+
+	/* solve the race between becoming unconfigured,
+	 * worker doing the cleanup, and
+	 * admin reconfiguring us:
+	 * on (re)configure, first set CONFIG_PENDING,
+	 * then wait for a potentially exiting worker,
+	 * start the worker, and schedule one no_op.
+	 * then proceed with configuration.
+	 */
+	if (ns.disk == D_DISKLESS &&
+	    ns.conn == C_STANDALONE &&
+	    ns.role == R_SECONDARY &&
+	    !test_and_set_bit(CONFIG_PENDING, &mdev->flags))
+		set_bit(DEVICE_DYING, &mdev->flags);
+
+	mdev->state.i = ns.i;
+	wake_up(&mdev->misc_wait);
+	wake_up(&mdev->state_wait);
+
+	/*   post-state-change actions   */
+	if (os.conn >= C_SYNC_SOURCE   && ns.conn <= C_CONNECTED) {
+		set_bit(STOP_SYNC_TIMER, &mdev->flags);
+		mod_timer(&mdev->resync_timer, jiffies);
+	}
+
+	/* aborted verify run. log the last position */
+	if ((os.conn == C_VERIFY_S || os.conn == C_VERIFY_T) &&
+	    ns.conn < C_CONNECTED) {
+		mdev->ov_start_sector =
+			BM_BIT_TO_SECT(mdev->rs_total - mdev->ov_left);
+		dev_info(DEV, "Online Verify reached sector %llu\n",
+			(unsigned long long)mdev->ov_start_sector);
+	}
+
+	if ((os.conn == C_PAUSED_SYNC_T || os.conn == C_PAUSED_SYNC_S) &&
+	    (ns.conn == C_SYNC_TARGET  || ns.conn == C_SYNC_SOURCE)) {
+		dev_info(DEV, "Syncer continues.\n");
+		mdev->rs_paused += (long)jiffies-(long)mdev->rs_mark_time;
+		if (ns.conn == C_SYNC_TARGET) {
+			if (!test_and_clear_bit(STOP_SYNC_TIMER, &mdev->flags))
+				mod_timer(&mdev->resync_timer, jiffies);
+			/* This if (!test_bit) is only needed for the case
+			   that a device that has ceased to used its timer,
+			   i.e. it is already in drbd_resync_finished() gets
+			   paused and resumed. */
+		}
+	}
+
+	if ((os.conn == C_SYNC_TARGET  || os.conn == C_SYNC_SOURCE) &&
+	    (ns.conn == C_PAUSED_SYNC_T || ns.conn == C_PAUSED_SYNC_S)) {
+		dev_info(DEV, "Resync suspended\n");
+		mdev->rs_mark_time = jiffies;
+		if (ns.conn == C_PAUSED_SYNC_T)
+			set_bit(STOP_SYNC_TIMER, &mdev->flags);
+	}
+
+	if (os.conn == C_CONNECTED &&
+	    (ns.conn == C_VERIFY_S || ns.conn == C_VERIFY_T)) {
+		mdev->ov_position = 0;
+		mdev->rs_total =
+		mdev->rs_mark_left = drbd_bm_bits(mdev);
+		if (mdev->agreed_pro_version >= 90)
+			set_ov_position(mdev, ns.conn);
+		else
+			mdev->ov_start_sector = 0;
+		mdev->ov_left = mdev->rs_total
+			      - BM_SECT_TO_BIT(mdev->ov_position);
+		mdev->rs_start     =
+		mdev->rs_mark_time = jiffies;
+		mdev->ov_last_oos_size = 0;
+		mdev->ov_last_oos_start = 0;
+
+		if (ns.conn == C_VERIFY_S) {
+			dev_info(DEV, "Starting Online Verify from sector %llu\n",
+					(unsigned long long)mdev->ov_position);
+			mod_timer(&mdev->resync_timer, jiffies);
+		}
+	}
+
+	if (get_ldev(mdev)) {
+		u32 mdf = mdev->ldev->md.flags & ~(MDF_CONSISTENT|MDF_PRIMARY_IND|
+						 MDF_CONNECTED_IND|MDF_WAS_UP_TO_DATE|
+						 MDF_PEER_OUT_DATED|MDF_CRASHED_PRIMARY);
+
+		if (test_bit(CRASHED_PRIMARY, &mdev->flags))
+			mdf |= MDF_CRASHED_PRIMARY;
+		if (mdev->state.role == R_PRIMARY ||
+		    (mdev->state.pdsk < D_INCONSISTENT && mdev->state.peer == R_PRIMARY))
+			mdf |= MDF_PRIMARY_IND;
+		if (mdev->state.conn > C_WF_REPORT_PARAMS)
+			mdf |= MDF_CONNECTED_IND;
+		if (mdev->state.disk > D_INCONSISTENT)
+			mdf |= MDF_CONSISTENT;
+		if (mdev->state.disk > D_OUTDATED)
+			mdf |= MDF_WAS_UP_TO_DATE;
+		if (mdev->state.pdsk <= D_OUTDATED && mdev->state.pdsk >= D_INCONSISTENT)
+			mdf |= MDF_PEER_OUT_DATED;
+		if (mdf != mdev->ldev->md.flags) {
+			mdev->ldev->md.flags = mdf;
+			drbd_md_mark_dirty(mdev);
+		}
+		if (os.disk < D_CONSISTENT && ns.disk >= D_CONSISTENT)
+			drbd_set_ed_uuid(mdev, mdev->ldev->md.uuid[UI_CURRENT]);
+		put_ldev(mdev);
+	}
+
+	/* Peer was forced D_UP_TO_DATE & R_PRIMARY, consider to resync */
+	if (os.disk == D_INCONSISTENT && os.pdsk == D_INCONSISTENT &&
+	    os.peer == R_SECONDARY && ns.peer == R_PRIMARY)
+		set_bit(CONSIDER_RESYNC, &mdev->flags);
+
+	/* Receiver should clean up itself */
+	if (os.conn != C_DISCONNECTING && ns.conn == C_DISCONNECTING)
+		drbd_thread_stop_nowait(&mdev->receiver);
+
+	/* Now the receiver finished cleaning up itself, it should die */
+	if (os.conn != C_STANDALONE && ns.conn == C_STANDALONE)
+		drbd_thread_stop_nowait(&mdev->receiver);
+
+	/* Upon network failure, we need to restart the receiver. */
+	if (os.conn > C_TEAR_DOWN &&
+	    ns.conn <= C_TEAR_DOWN && ns.conn >= C_TIMEOUT)
+		drbd_thread_restart_nowait(&mdev->receiver);
+
+	ascw = kmalloc(sizeof(*ascw), GFP_ATOMIC);
+	if (ascw) {
+		ascw->os = os;
+		ascw->ns = ns;
+		ascw->flags = flags;
+		ascw->w.cb = w_after_state_ch;
+		ascw->done = done;
+		drbd_queue_work(&mdev->data.work, &ascw->w);
+	} else {
+		dev_warn(DEV, "Could not kmalloc an ascw\n");
+	}
+
+	return rv;
+}
+
+static int w_after_state_ch(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	struct after_state_chg_work *ascw =
+		container_of(w, struct after_state_chg_work, w);
+	after_state_ch(mdev, ascw->os, ascw->ns, ascw->flags);
+	if (ascw->flags & CS_WAIT_COMPLETE) {
+		D_ASSERT(ascw->done != NULL);
+		complete(ascw->done);
+	}
+	kfree(ascw);
+
+	return 1;
+}
+
+static void abw_start_sync(struct drbd_conf *mdev, int rv)
+{
+	if (rv) {
+		dev_err(DEV, "Writing the bitmap failed not starting resync.\n");
+		_drbd_request_state(mdev, NS(conn, C_CONNECTED), CS_VERBOSE);
+		return;
+	}
+
+	switch (mdev->state.conn) {
+	case C_STARTING_SYNC_T:
+		_drbd_request_state(mdev, NS(conn, C_WF_SYNC_UUID), CS_VERBOSE);
+		break;
+	case C_STARTING_SYNC_S:
+		drbd_start_resync(mdev, C_SYNC_SOURCE);
+		break;
+	}
+}
+
+/**
+ * after_state_ch() - Perform after state change actions that may sleep
+ * @mdev:	DRBD device.
+ * @os:		old state.
+ * @ns:		new state.
+ * @flags:	Flags
+ */
+static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
+			   union drbd_state ns, enum chg_state_flags flags)
+{
+	enum drbd_fencing_p fp;
+
+	if (os.conn != C_CONNECTED && ns.conn == C_CONNECTED) {
+		clear_bit(CRASHED_PRIMARY, &mdev->flags);
+		if (mdev->p_uuid)
+			mdev->p_uuid[UI_FLAGS] &= ~((u64)2);
+	}
+
+	fp = FP_DONT_CARE;
+	if (get_ldev(mdev)) {
+		fp = mdev->ldev->dc.fencing;
+		put_ldev(mdev);
+	}
+
+	/* Inform userspace about the change... */
+	drbd_bcast_state(mdev, ns);
+
+	if (!(os.role == R_PRIMARY && os.disk < D_UP_TO_DATE && os.pdsk < D_UP_TO_DATE) &&
+	    (ns.role == R_PRIMARY && ns.disk < D_UP_TO_DATE && ns.pdsk < D_UP_TO_DATE))
+		drbd_khelper(mdev, "pri-on-incon-degr");
+
+	/* Here we have the actions that are performed after a
+	   state change. This function might sleep */
+
+	if (fp == FP_STONITH && ns.susp) {
+		/* case1: The outdate peer handler is successful:
+		 * case2: The connection was established again: */
+		if ((os.pdsk > D_OUTDATED  && ns.pdsk <= D_OUTDATED) ||
+		    (os.conn < C_CONNECTED && ns.conn >= C_CONNECTED)) {
+			tl_clear(mdev);
+			spin_lock_irq(&mdev->req_lock);
+			_drbd_set_state(_NS(mdev, susp, 0), CS_VERBOSE, NULL);
+			spin_unlock_irq(&mdev->req_lock);
+		}
+	}
+	/* Do not change the order of the if above and the two below... */
+	if (os.pdsk == D_DISKLESS && ns.pdsk > D_DISKLESS) {      /* attach on the peer */
+		drbd_send_uuids(mdev);
+		drbd_send_state(mdev);
+	}
+	if (os.conn != C_WF_BITMAP_S && ns.conn == C_WF_BITMAP_S)
+		drbd_queue_bitmap_io(mdev, &drbd_send_bitmap, NULL, "send_bitmap (WFBitMapS)");
+
+	/* Lost contact to peer's copy of the data */
+	if ((os.pdsk >= D_INCONSISTENT &&
+	     os.pdsk != D_UNKNOWN &&
+	     os.pdsk != D_OUTDATED)
+	&&  (ns.pdsk < D_INCONSISTENT ||
+	     ns.pdsk == D_UNKNOWN ||
+	     ns.pdsk == D_OUTDATED)) {
+		kfree(mdev->p_uuid);
+		mdev->p_uuid = NULL;
+		if (get_ldev(mdev)) {
+			if ((ns.role == R_PRIMARY || ns.peer == R_PRIMARY) &&
+			    mdev->ldev->md.uuid[UI_BITMAP] == 0 && ns.disk >= D_UP_TO_DATE) {
+				drbd_uuid_new_current(mdev);
+				drbd_send_uuids(mdev);
+			}
+			put_ldev(mdev);
+		}
+	}
+
+	if (ns.pdsk < D_INCONSISTENT && get_ldev(mdev)) {
+		if (ns.peer == R_PRIMARY && mdev->ldev->md.uuid[UI_BITMAP] == 0)
+			drbd_uuid_new_current(mdev);
+
+		/* D_DISKLESS Peer becomes secondary */
+		if (os.peer == R_PRIMARY && ns.peer == R_SECONDARY)
+			drbd_al_to_on_disk_bm(mdev);
+		put_ldev(mdev);
+	}
+
+	/* Last part of the attaching process ... */
+	if (ns.conn >= C_CONNECTED &&
+	    os.disk == D_ATTACHING && ns.disk == D_NEGOTIATING) {
+		kfree(mdev->p_uuid); /* We expect to receive up-to-date UUIDs soon. */
+		mdev->p_uuid = NULL; /* ...to not use the old ones in the mean time */
+		drbd_send_sizes(mdev, 0);  /* to start sync... */
+		drbd_send_uuids(mdev);
+		drbd_send_state(mdev);
+	}
+
+	/* We want to pause/continue resync, tell peer. */
+	if (ns.conn >= C_CONNECTED &&
+	     ((os.aftr_isp != ns.aftr_isp) ||
+	      (os.user_isp != ns.user_isp)))
+		drbd_send_state(mdev);
+
+	/* In case one of the isp bits got set, suspend other devices. */
+	if ((!os.aftr_isp && !os.peer_isp && !os.user_isp) &&
+	    (ns.aftr_isp || ns.peer_isp || ns.user_isp))
+		suspend_other_sg(mdev);
+
+	/* Make sure the peer gets informed about eventual state
+	   changes (ISP bits) while we were in WFReportParams. */
+	if (os.conn == C_WF_REPORT_PARAMS && ns.conn >= C_CONNECTED)
+		drbd_send_state(mdev);
+
+	/* We are in the progress to start a full sync... */
+	if ((os.conn != C_STARTING_SYNC_T && ns.conn == C_STARTING_SYNC_T) ||
+	    (os.conn != C_STARTING_SYNC_S && ns.conn == C_STARTING_SYNC_S))
+		drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, &abw_start_sync, "set_n_write from StartingSync");
+
+	/* We are invalidating our self... */
+	if (os.conn < C_CONNECTED && ns.conn < C_CONNECTED &&
+	    os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT)
+		drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate");
+
+	if (os.disk > D_FAILED && ns.disk == D_FAILED) {
+		enum drbd_io_error_p eh;
+
+		eh = EP_PASS_ON;
+		if (get_ldev_if_state(mdev, D_FAILED)) {
+			eh = mdev->ldev->dc.on_io_error;
+			put_ldev(mdev);
+		}
+
+		drbd_rs_cancel_all(mdev);
+		/* since get_ldev() only works as long as disk>=D_INCONSISTENT,
+		   and it is D_DISKLESS here, local_cnt can only go down, it can
+		   not increase... It will reach zero */
+		wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
+		mdev->rs_total = 0;
+		mdev->rs_failed = 0;
+		atomic_set(&mdev->rs_pending_cnt, 0);
+
+		spin_lock_irq(&mdev->req_lock);
+		_drbd_set_state(_NS(mdev, disk, D_DISKLESS), CS_HARD, NULL);
+		spin_unlock_irq(&mdev->req_lock);
+
+		if (eh == EP_CALL_HELPER)
+			drbd_khelper(mdev, "local-io-error");
+	}
+
+	if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) {
+
+		if (os.disk == D_FAILED) /* && ns.disk == D_DISKLESS*/ {
+			if (drbd_send_state(mdev))
+				dev_warn(DEV, "Notified peer that my disk is broken.\n");
+			else
+				dev_err(DEV, "Sending state in drbd_io_error() failed\n");
+		}
+
+		lc_destroy(mdev->resync);
+		mdev->resync = NULL;
+		lc_destroy(mdev->act_log);
+		mdev->act_log = NULL;
+		__no_warn(local,
+			drbd_free_bc(mdev->ldev);
+			mdev->ldev = NULL;);
+
+		if (mdev->md_io_tmpp)
+			__free_page(mdev->md_io_tmpp);
+	}
+
+	/* Disks got bigger while they were detached */
+	if (ns.disk > D_NEGOTIATING && ns.pdsk > D_NEGOTIATING &&
+	    test_and_clear_bit(RESYNC_AFTER_NEG, &mdev->flags)) {
+		if (ns.conn == C_CONNECTED)
+			resync_after_online_grow(mdev);
+	}
+
+	/* A resync finished or aborted, wake paused devices... */
+	if ((os.conn > C_CONNECTED && ns.conn <= C_CONNECTED) ||
+	    (os.peer_isp && !ns.peer_isp) ||
+	    (os.user_isp && !ns.user_isp))
+		resume_next_sg(mdev);
+
+	/* Upon network connection, we need to start the receiver */
+	if (os.conn == C_STANDALONE && ns.conn == C_UNCONNECTED)
+		drbd_thread_start(&mdev->receiver);
+
+	/* Terminate worker thread if we are unconfigured - it will be
+	   restarted as needed... */
+	if (ns.disk == D_DISKLESS &&
+	    ns.conn == C_STANDALONE &&
+	    ns.role == R_SECONDARY) {
+		if (os.aftr_isp != ns.aftr_isp)
+			resume_next_sg(mdev);
+		/* set in __drbd_set_state, unless CONFIG_PENDING was set */
+		if (test_bit(DEVICE_DYING, &mdev->flags))
+			drbd_thread_stop_nowait(&mdev->worker);
+	}
+
+	drbd_md_sync(mdev);
+}
+
+
+static int drbd_thread_setup(void *arg)
+{
+	struct drbd_thread *thi = (struct drbd_thread *) arg;
+	struct drbd_conf *mdev = thi->mdev;
+	unsigned long flags;
+	int retval;
+
+restart:
+	retval = thi->function(thi);
+
+	spin_lock_irqsave(&thi->t_lock, flags);
+
+	/* if the receiver has been "Exiting", the last thing it did
+	 * was set the conn state to "StandAlone",
+	 * if now a re-connect request comes in, conn state goes C_UNCONNECTED,
+	 * and receiver thread will be "started".
+	 * drbd_thread_start needs to set "Restarting" in that case.
+	 * t_state check and assignment needs to be within the same spinlock,
+	 * so either thread_start sees Exiting, and can remap to Restarting,
+	 * or thread_start see None, and can proceed as normal.
+	 */
+
+	if (thi->t_state == Restarting) {
+		dev_info(DEV, "Restarting %s\n", current->comm);
+		thi->t_state = Running;
+		spin_unlock_irqrestore(&thi->t_lock, flags);
+		goto restart;
+	}
+
+	thi->task = NULL;
+	thi->t_state = None;
+	smp_mb();
+	complete(&thi->stop);
+	spin_unlock_irqrestore(&thi->t_lock, flags);
+
+	dev_info(DEV, "Terminating %s\n", current->comm);
+
+	/* Release mod reference taken when thread was started */
+	module_put(THIS_MODULE);
+	return retval;
+}
+
+static void drbd_thread_init(struct drbd_conf *mdev, struct drbd_thread *thi,
+		      int (*func) (struct drbd_thread *))
+{
+	spin_lock_init(&thi->t_lock);
+	thi->task    = NULL;
+	thi->t_state = None;
+	thi->function = func;
+	thi->mdev = mdev;
+}
+
+int drbd_thread_start(struct drbd_thread *thi)
+{
+	struct drbd_conf *mdev = thi->mdev;
+	struct task_struct *nt;
+	unsigned long flags;
+
+	const char *me =
+		thi == &mdev->receiver ? "receiver" :
+		thi == &mdev->asender  ? "asender"  :
+		thi == &mdev->worker   ? "worker"   : "NONSENSE";
+
+	/* is used from state engine doing drbd_thread_stop_nowait,
+	 * while holding the req lock irqsave */
+	spin_lock_irqsave(&thi->t_lock, flags);
+
+	switch (thi->t_state) {
+	case None:
+		dev_info(DEV, "Starting %s thread (from %s [%d])\n",
+				me, current->comm, current->pid);
+
+		/* Get ref on module for thread - this is released when thread exits */
+		if (!try_module_get(THIS_MODULE)) {
+			dev_err(DEV, "Failed to get module reference in drbd_thread_start\n");
+			spin_unlock_irqrestore(&thi->t_lock, flags);
+			return FALSE;
+		}
+
+		init_completion(&thi->stop);
+		D_ASSERT(thi->task == NULL);
+		thi->reset_cpu_mask = 1;
+		thi->t_state = Running;
+		spin_unlock_irqrestore(&thi->t_lock, flags);
+		flush_signals(current); /* otherw. may get -ERESTARTNOINTR */
+
+		nt = kthread_create(drbd_thread_setup, (void *) thi,
+				    "drbd%d_%s", mdev_to_minor(mdev), me);
+
+		if (IS_ERR(nt)) {
+			dev_err(DEV, "Couldn't start thread\n");
+
+			module_put(THIS_MODULE);
+			return FALSE;
+		}
+		spin_lock_irqsave(&thi->t_lock, flags);
+		thi->task = nt;
+		thi->t_state = Running;
+		spin_unlock_irqrestore(&thi->t_lock, flags);
+		wake_up_process(nt);
+		break;
+	case Exiting:
+		thi->t_state = Restarting;
+		dev_info(DEV, "Restarting %s thread (from %s [%d])\n",
+				me, current->comm, current->pid);
+		/* fall through */
+	case Running:
+	case Restarting:
+	default:
+		spin_unlock_irqrestore(&thi->t_lock, flags);
+		break;
+	}
+
+	return TRUE;
+}
+
+
+void _drbd_thread_stop(struct drbd_thread *thi, int restart, int wait)
+{
+	unsigned long flags;
+
+	enum drbd_thread_state ns = restart ? Restarting : Exiting;
+
+	/* may be called from state engine, holding the req lock irqsave */
+	spin_lock_irqsave(&thi->t_lock, flags);
+
+	if (thi->t_state == None) {
+		spin_unlock_irqrestore(&thi->t_lock, flags);
+		if (restart)
+			drbd_thread_start(thi);
+		return;
+	}
+
+	if (thi->t_state != ns) {
+		if (thi->task == NULL) {
+			spin_unlock_irqrestore(&thi->t_lock, flags);
+			return;
+		}
+
+		thi->t_state = ns;
+		smp_mb();
+		init_completion(&thi->stop);
+		if (thi->task != current)
+			force_sig(DRBD_SIGKILL, thi->task);
+
+	}
+
+	spin_unlock_irqrestore(&thi->t_lock, flags);
+
+	if (wait)
+		wait_for_completion(&thi->stop);
+}
+
+#ifdef CONFIG_SMP
+/**
+ * drbd_calc_cpu_mask() - Generate CPU masks, spread over all CPUs
+ * @mdev:	DRBD device.
+ *
+ * Forces all threads of a device onto the same CPU. This is beneficial for
+ * DRBD's performance. May be overwritten by user's configuration.
+ */
+void drbd_calc_cpu_mask(struct drbd_conf *mdev)
+{
+	int ord, cpu;
+
+	/* user override. */
+	if (cpumask_weight(mdev->cpu_mask))
+		return;
+
+	ord = mdev_to_minor(mdev) % cpumask_weight(cpu_online_mask);
+	for_each_online_cpu(cpu) {
+		if (ord-- == 0) {
+			cpumask_set_cpu(cpu, mdev->cpu_mask);
+			return;
+		}
+	}
+	/* should not be reached */
+	cpumask_setall(mdev->cpu_mask);
+}
+
+/**
+ * drbd_thread_current_set_cpu() - modifies the cpu mask of the _current_ thread
+ * @mdev:	DRBD device.
+ *
+ * call in the "main loop" of _all_ threads, no need for any mutex, current won't die
+ * prematurely.
+ */
+void drbd_thread_current_set_cpu(struct drbd_conf *mdev)
+{
+	struct task_struct *p = current;
+	struct drbd_thread *thi =
+		p == mdev->asender.task  ? &mdev->asender  :
+		p == mdev->receiver.task ? &mdev->receiver :
+		p == mdev->worker.task   ? &mdev->worker   :
+		NULL;
+	ERR_IF(thi == NULL)
+		return;
+	if (!thi->reset_cpu_mask)
+		return;
+	thi->reset_cpu_mask = 0;
+	set_cpus_allowed_ptr(p, mdev->cpu_mask);
+}
+#endif
+
+/* the appropriate socket mutex must be held already */
+int _drbd_send_cmd(struct drbd_conf *mdev, struct socket *sock,
+			  enum drbd_packets cmd, struct p_header *h,
+			  size_t size, unsigned msg_flags)
+{
+	int sent, ok;
+
+	ERR_IF(!h) return FALSE;
+	ERR_IF(!size) return FALSE;
+
+	h->magic   = BE_DRBD_MAGIC;
+	h->command = cpu_to_be16(cmd);
+	h->length  = cpu_to_be16(size-sizeof(struct p_header));
+
+	sent = drbd_send(mdev, sock, h, size, msg_flags);
+
+	ok = (sent == size);
+	if (!ok)
+		dev_err(DEV, "short sent %s size=%d sent=%d\n",
+		    cmdname(cmd), (int)size, sent);
+	return ok;
+}
+
+/* don't pass the socket. we may only look at it
+ * when we hold the appropriate socket mutex.
+ */
+int drbd_send_cmd(struct drbd_conf *mdev, int use_data_socket,
+		  enum drbd_packets cmd, struct p_header *h, size_t size)
+{
+	int ok = 0;
+	struct socket *sock;
+
+	if (use_data_socket) {
+		mutex_lock(&mdev->data.mutex);
+		sock = mdev->data.socket;
+	} else {
+		mutex_lock(&mdev->meta.mutex);
+		sock = mdev->meta.socket;
+	}
+
+	/* drbd_disconnect() could have called drbd_free_sock()
+	 * while we were waiting in down()... */
+	if (likely(sock != NULL))
+		ok = _drbd_send_cmd(mdev, sock, cmd, h, size, 0);
+
+	if (use_data_socket)
+		mutex_unlock(&mdev->data.mutex);
+	else
+		mutex_unlock(&mdev->meta.mutex);
+	return ok;
+}
+
+int drbd_send_cmd2(struct drbd_conf *mdev, enum drbd_packets cmd, char *data,
+		   size_t size)
+{
+	struct p_header h;
+	int ok;
+
+	h.magic   = BE_DRBD_MAGIC;
+	h.command = cpu_to_be16(cmd);
+	h.length  = cpu_to_be16(size);
+
+	if (!drbd_get_data_sock(mdev))
+		return 0;
+
+	ok = (sizeof(h) ==
+		drbd_send(mdev, mdev->data.socket, &h, sizeof(h), 0));
+	ok = ok && (size ==
+		drbd_send(mdev, mdev->data.socket, data, size, 0));
+
+	drbd_put_data_sock(mdev);
+
+	return ok;
+}
+
+int drbd_send_sync_param(struct drbd_conf *mdev, struct syncer_conf *sc)
+{
+	struct p_rs_param_89 *p;
+	struct socket *sock;
+	int size, rv;
+	const int apv = mdev->agreed_pro_version;
+
+	size = apv <= 87 ? sizeof(struct p_rs_param)
+		: apv == 88 ? sizeof(struct p_rs_param)
+			+ strlen(mdev->sync_conf.verify_alg) + 1
+		: /* 89 */    sizeof(struct p_rs_param_89);
+
+	/* used from admin command context and receiver/worker context.
+	 * to avoid kmalloc, grab the socket right here,
+	 * then use the pre-allocated sbuf there */
+	mutex_lock(&mdev->data.mutex);
+	sock = mdev->data.socket;
+
+	if (likely(sock != NULL)) {
+		enum drbd_packets cmd = apv >= 89 ? P_SYNC_PARAM89 : P_SYNC_PARAM;
+
+		p = &mdev->data.sbuf.rs_param_89;
+
+		/* initialize verify_alg and csums_alg */
+		memset(p->verify_alg, 0, 2 * SHARED_SECRET_MAX);
+
+		p->rate = cpu_to_be32(sc->rate);
+
+		if (apv >= 88)
+			strcpy(p->verify_alg, mdev->sync_conf.verify_alg);
+		if (apv >= 89)
+			strcpy(p->csums_alg, mdev->sync_conf.csums_alg);
+
+		rv = _drbd_send_cmd(mdev, sock, cmd, &p->head, size, 0);
+	} else
+		rv = 0; /* not ok */
+
+	mutex_unlock(&mdev->data.mutex);
+
+	return rv;
+}
+
+int drbd_send_protocol(struct drbd_conf *mdev)
+{
+	struct p_protocol *p;
+	int size, rv;
+
+	size = sizeof(struct p_protocol);
+
+	if (mdev->agreed_pro_version >= 87)
+		size += strlen(mdev->net_conf->integrity_alg) + 1;
+
+	/* we must not recurse into our own queue,
+	 * as that is blocked during handshake */
+	p = kmalloc(size, GFP_NOIO);
+	if (p == NULL)
+		return 0;
+
+	p->protocol      = cpu_to_be32(mdev->net_conf->wire_protocol);
+	p->after_sb_0p   = cpu_to_be32(mdev->net_conf->after_sb_0p);
+	p->after_sb_1p   = cpu_to_be32(mdev->net_conf->after_sb_1p);
+	p->after_sb_2p   = cpu_to_be32(mdev->net_conf->after_sb_2p);
+	p->want_lose     = cpu_to_be32(mdev->net_conf->want_lose);
+	p->two_primaries = cpu_to_be32(mdev->net_conf->two_primaries);
+
+	if (mdev->agreed_pro_version >= 87)
+		strcpy(p->integrity_alg, mdev->net_conf->integrity_alg);
+
+	rv = drbd_send_cmd(mdev, USE_DATA_SOCKET, P_PROTOCOL,
+			   (struct p_header *)p, size);
+	kfree(p);
+	return rv;
+}
+
+int _drbd_send_uuids(struct drbd_conf *mdev, u64 uuid_flags)
+{
+	struct p_uuids p;
+	int i;
+
+	if (!get_ldev_if_state(mdev, D_NEGOTIATING))
+		return 1;
+
+	for (i = UI_CURRENT; i < UI_SIZE; i++)
+		p.uuid[i] = mdev->ldev ? cpu_to_be64(mdev->ldev->md.uuid[i]) : 0;
+
+	mdev->comm_bm_set = drbd_bm_total_weight(mdev);
+	p.uuid[UI_SIZE] = cpu_to_be64(mdev->comm_bm_set);
+	uuid_flags |= mdev->net_conf->want_lose ? 1 : 0;
+	uuid_flags |= test_bit(CRASHED_PRIMARY, &mdev->flags) ? 2 : 0;
+	uuid_flags |= mdev->new_state_tmp.disk == D_INCONSISTENT ? 4 : 0;
+	p.uuid[UI_FLAGS] = cpu_to_be64(uuid_flags);
+
+	put_ldev(mdev);
+
+	return drbd_send_cmd(mdev, USE_DATA_SOCKET, P_UUIDS,
+			     (struct p_header *)&p, sizeof(p));
+}
+
+int drbd_send_uuids(struct drbd_conf *mdev)
+{
+	return _drbd_send_uuids(mdev, 0);
+}
+
+int drbd_send_uuids_skip_initial_sync(struct drbd_conf *mdev)
+{
+	return _drbd_send_uuids(mdev, 8);
+}
+
+
+int drbd_send_sync_uuid(struct drbd_conf *mdev, u64 val)
+{
+	struct p_rs_uuid p;
+
+	p.uuid = cpu_to_be64(val);
+
+	return drbd_send_cmd(mdev, USE_DATA_SOCKET, P_SYNC_UUID,
+			     (struct p_header *)&p, sizeof(p));
+}
+
+int drbd_send_sizes(struct drbd_conf *mdev, int trigger_reply)
+{
+	struct p_sizes p;
+	sector_t d_size, u_size;
+	int q_order_type;
+	int ok;
+
+	if (get_ldev_if_state(mdev, D_NEGOTIATING)) {
+		D_ASSERT(mdev->ldev->backing_bdev);
+		d_size = drbd_get_max_capacity(mdev->ldev);
+		u_size = mdev->ldev->dc.disk_size;
+		q_order_type = drbd_queue_order_type(mdev);
+		p.queue_order_type = cpu_to_be32(drbd_queue_order_type(mdev));
+		put_ldev(mdev);
+	} else {
+		d_size = 0;
+		u_size = 0;
+		q_order_type = QUEUE_ORDERED_NONE;
+	}
+
+	p.d_size = cpu_to_be64(d_size);
+	p.u_size = cpu_to_be64(u_size);
+	p.c_size = cpu_to_be64(trigger_reply ? 0 : drbd_get_capacity(mdev->this_bdev));
+	p.max_segment_size = cpu_to_be32(queue_max_segment_size(mdev->rq_queue));
+	p.queue_order_type = cpu_to_be32(q_order_type);
+
+	ok = drbd_send_cmd(mdev, USE_DATA_SOCKET, P_SIZES,
+			   (struct p_header *)&p, sizeof(p));
+	return ok;
+}
+
+/**
+ * drbd_send_state() - Sends the drbd state to the peer
+ * @mdev:	DRBD device.
+ */
+int drbd_send_state(struct drbd_conf *mdev)
+{
+	struct socket *sock;
+	struct p_state p;
+	int ok = 0;
+
+	/* Grab state lock so we wont send state if we're in the middle
+	 * of a cluster wide state change on another thread */
+	drbd_state_lock(mdev);
+
+	mutex_lock(&mdev->data.mutex);
+
+	p.state = cpu_to_be32(mdev->state.i); /* Within the send mutex */
+	sock = mdev->data.socket;
+
+	if (likely(sock != NULL)) {
+		ok = _drbd_send_cmd(mdev, sock, P_STATE,
+				    (struct p_header *)&p, sizeof(p), 0);
+	}
+
+	mutex_unlock(&mdev->data.mutex);
+
+	drbd_state_unlock(mdev);
+	return ok;
+}
+
+int drbd_send_state_req(struct drbd_conf *mdev,
+	union drbd_state mask, union drbd_state val)
+{
+	struct p_req_state p;
+
+	p.mask    = cpu_to_be32(mask.i);
+	p.val     = cpu_to_be32(val.i);
+
+	return drbd_send_cmd(mdev, USE_DATA_SOCKET, P_STATE_CHG_REQ,
+			     (struct p_header *)&p, sizeof(p));
+}
+
+int drbd_send_sr_reply(struct drbd_conf *mdev, int retcode)
+{
+	struct p_req_state_reply p;
+
+	p.retcode    = cpu_to_be32(retcode);
+
+	return drbd_send_cmd(mdev, USE_META_SOCKET, P_STATE_CHG_REPLY,
+			     (struct p_header *)&p, sizeof(p));
+}
+
+int fill_bitmap_rle_bits(struct drbd_conf *mdev,
+	struct p_compressed_bm *p,
+	struct bm_xfer_ctx *c)
+{
+	struct bitstream bs;
+	unsigned long plain_bits;
+	unsigned long tmp;
+	unsigned long rl;
+	unsigned len;
+	unsigned toggle;
+	int bits;
+
+	/* may we use this feature? */
+	if ((mdev->sync_conf.use_rle == 0) ||
+		(mdev->agreed_pro_version < 90))
+			return 0;
+
+	if (c->bit_offset >= c->bm_bits)
+		return 0; /* nothing to do. */
+
+	/* use at most thus many bytes */
+	bitstream_init(&bs, p->code, BM_PACKET_VLI_BYTES_MAX, 0);
+	memset(p->code, 0, BM_PACKET_VLI_BYTES_MAX);
+	/* plain bits covered in this code string */
+	plain_bits = 0;
+
+	/* p->encoding & 0x80 stores whether the first run length is set.
+	 * bit offset is implicit.
+	 * start with toggle == 2 to be able to tell the first iteration */
+	toggle = 2;
+
+	/* see how much plain bits we can stuff into one packet
+	 * using RLE and VLI. */
+	do {
+		tmp = (toggle == 0) ? _drbd_bm_find_next_zero(mdev, c->bit_offset)
+				    : _drbd_bm_find_next(mdev, c->bit_offset);
+		if (tmp == -1UL)
+			tmp = c->bm_bits;
+		rl = tmp - c->bit_offset;
+
+		if (toggle == 2) { /* first iteration */
+			if (rl == 0) {
+				/* the first checked bit was set,
+				 * store start value, */
+				DCBP_set_start(p, 1);
+				/* but skip encoding of zero run length */
+				toggle = !toggle;
+				continue;
+			}
+			DCBP_set_start(p, 0);
+		}
+
+		/* paranoia: catch zero runlength.
+		 * can only happen if bitmap is modified while we scan it. */
+		if (rl == 0) {
+			dev_err(DEV, "unexpected zero runlength while encoding bitmap "
+			    "t:%u bo:%lu\n", toggle, c->bit_offset);
+			return -1;
+		}
+
+		bits = vli_encode_bits(&bs, rl);
+		if (bits == -ENOBUFS) /* buffer full */
+			break;
+		if (bits <= 0) {
+			dev_err(DEV, "error while encoding bitmap: %d\n", bits);
+			return 0;
+		}
+
+		toggle = !toggle;
+		plain_bits += rl;
+		c->bit_offset = tmp;
+	} while (c->bit_offset < c->bm_bits);
+
+	len = bs.cur.b - p->code + !!bs.cur.bit;
+
+	if (plain_bits < (len << 3)) {
+		/* incompressible with this method.
+		 * we need to rewind both word and bit position. */
+		c->bit_offset -= plain_bits;
+		bm_xfer_ctx_bit_to_word_offset(c);
+		c->bit_offset = c->word_offset * BITS_PER_LONG;
+		return 0;
+	}
+
+	/* RLE + VLI was able to compress it just fine.
+	 * update c->word_offset. */
+	bm_xfer_ctx_bit_to_word_offset(c);
+
+	/* store pad_bits */
+	DCBP_set_pad_bits(p, (8 - bs.cur.bit) & 0x7);
+
+	return len;
+}
+
+enum { OK, FAILED, DONE }
+send_bitmap_rle_or_plain(struct drbd_conf *mdev,
+	struct p_header *h, struct bm_xfer_ctx *c)
+{
+	struct p_compressed_bm *p = (void*)h;
+	unsigned long num_words;
+	int len;
+	int ok;
+
+	len = fill_bitmap_rle_bits(mdev, p, c);
+
+	if (len < 0)
+		return FAILED;
+
+	if (len) {
+		DCBP_set_code(p, RLE_VLI_Bits);
+		ok = _drbd_send_cmd(mdev, mdev->data.socket, P_COMPRESSED_BITMAP, h,
+			sizeof(*p) + len, 0);
+
+		c->packets[0]++;
+		c->bytes[0] += sizeof(*p) + len;
+
+		if (c->bit_offset >= c->bm_bits)
+			len = 0; /* DONE */
+	} else {
+		/* was not compressible.
+		 * send a buffer full of plain text bits instead. */
+		num_words = min_t(size_t, BM_PACKET_WORDS, c->bm_words - c->word_offset);
+		len = num_words * sizeof(long);
+		if (len)
+			drbd_bm_get_lel(mdev, c->word_offset, num_words, (unsigned long*)h->payload);
+		ok = _drbd_send_cmd(mdev, mdev->data.socket, P_BITMAP,
+				   h, sizeof(struct p_header) + len, 0);
+		c->word_offset += num_words;
+		c->bit_offset = c->word_offset * BITS_PER_LONG;
+
+		c->packets[1]++;
+		c->bytes[1] += sizeof(struct p_header) + len;
+
+		if (c->bit_offset > c->bm_bits)
+			c->bit_offset = c->bm_bits;
+	}
+	ok = ok ? ((len == 0) ? DONE : OK) : FAILED;
+
+	if (ok == DONE)
+		INFO_bm_xfer_stats(mdev, "send", c);
+	return ok;
+}
+
+/* See the comment at receive_bitmap() */
+int _drbd_send_bitmap(struct drbd_conf *mdev)
+{
+	struct bm_xfer_ctx c;
+	struct p_header *p;
+	int ret;
+
+	ERR_IF(!mdev->bitmap) return FALSE;
+
+	/* maybe we should use some per thread scratch page,
+	 * and allocate that during initial device creation? */
+	p = (struct p_header *) __get_free_page(GFP_NOIO);
+	if (!p) {
+		dev_err(DEV, "failed to allocate one page buffer in %s\n", __func__);
+		return FALSE;
+	}
+
+	if (get_ldev(mdev)) {
+		if (drbd_md_test_flag(mdev->ldev, MDF_FULL_SYNC)) {
+			dev_info(DEV, "Writing the whole bitmap, MDF_FullSync was set.\n");
+			drbd_bm_set_all(mdev);
+			if (drbd_bm_write(mdev)) {
+				/* write_bm did fail! Leave full sync flag set in Meta P_DATA
+				 * but otherwise process as per normal - need to tell other
+				 * side that a full resync is required! */
+				dev_err(DEV, "Failed to write bitmap to disk!\n");
+			} else {
+				drbd_md_clear_flag(mdev, MDF_FULL_SYNC);
+				drbd_md_sync(mdev);
+			}
+		}
+		put_ldev(mdev);
+	}
+
+	c = (struct bm_xfer_ctx) {
+		.bm_bits = drbd_bm_bits(mdev),
+		.bm_words = drbd_bm_words(mdev),
+	};
+
+	do {
+		ret = send_bitmap_rle_or_plain(mdev, p, &c);
+	} while (ret == OK);
+
+	free_page((unsigned long) p);
+	return (ret == DONE);
+}
+
+int drbd_send_bitmap(struct drbd_conf *mdev)
+{
+	int err;
+
+	if (!drbd_get_data_sock(mdev))
+		return -1;
+	err = !_drbd_send_bitmap(mdev);
+	drbd_put_data_sock(mdev);
+	return err;
+}
+
+int drbd_send_b_ack(struct drbd_conf *mdev, u32 barrier_nr, u32 set_size)
+{
+	int ok;
+	struct p_barrier_ack p;
+
+	p.barrier  = barrier_nr;
+	p.set_size = cpu_to_be32(set_size);
+
+	if (mdev->state.conn < C_CONNECTED)
+		return FALSE;
+	ok = drbd_send_cmd(mdev, USE_META_SOCKET, P_BARRIER_ACK,
+			(struct p_header *)&p, sizeof(p));
+	return ok;
+}
+
+/**
+ * _drbd_send_ack() - Sends an ack packet
+ * @mdev:	DRBD device.
+ * @cmd:	Packet command code.
+ * @sector:	sector, needs to be in big endian byte order
+ * @blksize:	size in byte, needs to be in big endian byte order
+ * @block_id:	Id, big endian byte order
+ */
+static int _drbd_send_ack(struct drbd_conf *mdev, enum drbd_packets cmd,
+			  u64 sector,
+			  u32 blksize,
+			  u64 block_id)
+{
+	int ok;
+	struct p_block_ack p;
+
+	p.sector   = sector;
+	p.block_id = block_id;
+	p.blksize  = blksize;
+	p.seq_num  = cpu_to_be32(atomic_add_return(1, &mdev->packet_seq));
+
+	if (!mdev->meta.socket || mdev->state.conn < C_CONNECTED)
+		return FALSE;
+	ok = drbd_send_cmd(mdev, USE_META_SOCKET, cmd,
+				(struct p_header *)&p, sizeof(p));
+	return ok;
+}
+
+int drbd_send_ack_dp(struct drbd_conf *mdev, enum drbd_packets cmd,
+		     struct p_data *dp)
+{
+	const int header_size = sizeof(struct p_data)
+			      - sizeof(struct p_header);
+	int data_size  = ((struct p_header *)dp)->length - header_size;
+
+	return _drbd_send_ack(mdev, cmd, dp->sector, cpu_to_be32(data_size),
+			      dp->block_id);
+}
+
+int drbd_send_ack_rp(struct drbd_conf *mdev, enum drbd_packets cmd,
+		     struct p_block_req *rp)
+{
+	return _drbd_send_ack(mdev, cmd, rp->sector, rp->blksize, rp->block_id);
+}
+
+/**
+ * drbd_send_ack() - Sends an ack packet
+ * @mdev:	DRBD device.
+ * @cmd:	Packet command code.
+ * @e:		Epoch entry.
+ */
+int drbd_send_ack(struct drbd_conf *mdev,
+	enum drbd_packets cmd, struct drbd_epoch_entry *e)
+{
+	return _drbd_send_ack(mdev, cmd,
+			      cpu_to_be64(e->sector),
+			      cpu_to_be32(e->size),
+			      e->block_id);
+}
+
+/* This function misuses the block_id field to signal if the blocks
+ * are is sync or not. */
+int drbd_send_ack_ex(struct drbd_conf *mdev, enum drbd_packets cmd,
+		     sector_t sector, int blksize, u64 block_id)
+{
+	return _drbd_send_ack(mdev, cmd,
+			      cpu_to_be64(sector),
+			      cpu_to_be32(blksize),
+			      cpu_to_be64(block_id));
+}
+
+int drbd_send_drequest(struct drbd_conf *mdev, int cmd,
+		       sector_t sector, int size, u64 block_id)
+{
+	int ok;
+	struct p_block_req p;
+
+	p.sector   = cpu_to_be64(sector);
+	p.block_id = block_id;
+	p.blksize  = cpu_to_be32(size);
+
+	ok = drbd_send_cmd(mdev, USE_DATA_SOCKET, cmd,
+				(struct p_header *)&p, sizeof(p));
+	return ok;
+}
+
+int drbd_send_drequest_csum(struct drbd_conf *mdev,
+			    sector_t sector, int size,
+			    void *digest, int digest_size,
+			    enum drbd_packets cmd)
+{
+	int ok;
+	struct p_block_req p;
+
+	p.sector   = cpu_to_be64(sector);
+	p.block_id = BE_DRBD_MAGIC + 0xbeef;
+	p.blksize  = cpu_to_be32(size);
+
+	p.head.magic   = BE_DRBD_MAGIC;
+	p.head.command = cpu_to_be16(cmd);
+	p.head.length  = cpu_to_be16(sizeof(p) - sizeof(struct p_header) + digest_size);
+
+	mutex_lock(&mdev->data.mutex);
+
+	ok = (sizeof(p) == drbd_send(mdev, mdev->data.socket, &p, sizeof(p), 0));
+	ok = ok && (digest_size == drbd_send(mdev, mdev->data.socket, digest, digest_size, 0));
+
+	mutex_unlock(&mdev->data.mutex);
+
+	return ok;
+}
+
+int drbd_send_ov_request(struct drbd_conf *mdev, sector_t sector, int size)
+{
+	int ok;
+	struct p_block_req p;
+
+	p.sector   = cpu_to_be64(sector);
+	p.block_id = BE_DRBD_MAGIC + 0xbabe;
+	p.blksize  = cpu_to_be32(size);
+
+	ok = drbd_send_cmd(mdev, USE_DATA_SOCKET, P_OV_REQUEST,
+			   (struct p_header *)&p, sizeof(p));
+	return ok;
+}
+
+/* called on sndtimeo
+ * returns FALSE if we should retry,
+ * TRUE if we think connection is dead
+ */
+static int we_should_drop_the_connection(struct drbd_conf *mdev, struct socket *sock)
+{
+	int drop_it;
+	/* long elapsed = (long)(jiffies - mdev->last_received); */
+
+	drop_it =   mdev->meta.socket == sock
+		|| !mdev->asender.task
+		|| get_t_state(&mdev->asender) != Running
+		|| mdev->state.conn < C_CONNECTED;
+
+	if (drop_it)
+		return TRUE;
+
+	drop_it = !--mdev->ko_count;
+	if (!drop_it) {
+		dev_err(DEV, "[%s/%d] sock_sendmsg time expired, ko = %u\n",
+		       current->comm, current->pid, mdev->ko_count);
+		request_ping(mdev);
+	}
+
+	return drop_it; /* && (mdev->state == R_PRIMARY) */;
+}
+
+/* The idea of sendpage seems to be to put some kind of reference
+ * to the page into the skb, and to hand it over to the NIC. In
+ * this process get_page() gets called.
+ *
+ * As soon as the page was really sent over the network put_page()
+ * gets called by some part of the network layer. [ NIC driver? ]
+ *
+ * [ get_page() / put_page() increment/decrement the count. If count
+ *   reaches 0 the page will be freed. ]
+ *
+ * This works nicely with pages from FSs.
+ * But this means that in protocol A we might signal IO completion too early!
+ *
+ * In order not to corrupt data during a resync we must make sure
+ * that we do not reuse our own buffer pages (EEs) to early, therefore
+ * we have the net_ee list.
+ *
+ * XFS seems to have problems, still, it submits pages with page_count == 0!
+ * As a workaround, we disable sendpage on pages
+ * with page_count == 0 or PageSlab.
+ */
+static int _drbd_no_send_page(struct drbd_conf *mdev, struct page *page,
+		   int offset, size_t size)
+{
+	int sent = drbd_send(mdev, mdev->data.socket, kmap(page) + offset, size, 0);
+	kunmap(page);
+	if (sent == size)
+		mdev->send_cnt += size>>9;
+	return sent == size;
+}
+
+static int _drbd_send_page(struct drbd_conf *mdev, struct page *page,
+		    int offset, size_t size)
+{
+	mm_segment_t oldfs = get_fs();
+	int sent, ok;
+	int len = size;
+
+	/* e.g. XFS meta- & log-data is in slab pages, which have a
+	 * page_count of 0 and/or have PageSlab() set.
+	 * we cannot use send_page for those, as that does get_page();
+	 * put_page(); and would cause either a VM_BUG directly, or
+	 * __page_cache_release a page that would actually still be referenced
+	 * by someone, leading to some obscure delayed Oops somewhere else. */
+	if (disable_sendpage || (page_count(page) < 1) || PageSlab(page))
+		return _drbd_no_send_page(mdev, page, offset, size);
+
+	drbd_update_congested(mdev);
+	set_fs(KERNEL_DS);
+	do {
+		sent = mdev->data.socket->ops->sendpage(mdev->data.socket, page,
+							offset, len,
+							MSG_NOSIGNAL);
+		if (sent == -EAGAIN) {
+			if (we_should_drop_the_connection(mdev,
+							  mdev->data.socket))
+				break;
+			else
+				continue;
+		}
+		if (sent <= 0) {
+			dev_warn(DEV, "%s: size=%d len=%d sent=%d\n",
+			     __func__, (int)size, len, sent);
+			break;
+		}
+		len    -= sent;
+		offset += sent;
+	} while (len > 0 /* THINK && mdev->cstate >= C_CONNECTED*/);
+	set_fs(oldfs);
+	clear_bit(NET_CONGESTED, &mdev->flags);
+
+	ok = (len == 0);
+	if (likely(ok))
+		mdev->send_cnt += size>>9;
+	return ok;
+}
+
+static int _drbd_send_bio(struct drbd_conf *mdev, struct bio *bio)
+{
+	struct bio_vec *bvec;
+	int i;
+	__bio_for_each_segment(bvec, bio, i, 0) {
+		if (!_drbd_no_send_page(mdev, bvec->bv_page,
+				     bvec->bv_offset, bvec->bv_len))
+			return 0;
+	}
+	return 1;
+}
+
+static int _drbd_send_zc_bio(struct drbd_conf *mdev, struct bio *bio)
+{
+	struct bio_vec *bvec;
+	int i;
+	__bio_for_each_segment(bvec, bio, i, 0) {
+		if (!_drbd_send_page(mdev, bvec->bv_page,
+				     bvec->bv_offset, bvec->bv_len))
+			return 0;
+	}
+
+	return 1;
+}
+
+/* Used to send write requests
+ * R_PRIMARY -> Peer	(P_DATA)
+ */
+int drbd_send_dblock(struct drbd_conf *mdev, struct drbd_request *req)
+{
+	int ok = 1;
+	struct p_data p;
+	unsigned int dp_flags = 0;
+	void *dgb;
+	int dgs;
+
+	if (!drbd_get_data_sock(mdev))
+		return 0;
+
+	dgs = (mdev->agreed_pro_version >= 87 && mdev->integrity_w_tfm) ?
+		crypto_hash_digestsize(mdev->integrity_w_tfm) : 0;
+
+	p.head.magic   = BE_DRBD_MAGIC;
+	p.head.command = cpu_to_be16(P_DATA);
+	p.head.length  =
+		cpu_to_be16(sizeof(p) - sizeof(struct p_header) + dgs + req->size);
+
+	p.sector   = cpu_to_be64(req->sector);
+	p.block_id = (unsigned long)req;
+	p.seq_num  = cpu_to_be32(req->seq_num =
+				 atomic_add_return(1, &mdev->packet_seq));
+	dp_flags = 0;
+
+	/* NOTE: no need to check if barriers supported here as we would
+	 *       not pass the test in make_request_common in that case
+	 */
+	if (bio_rw_flagged(req->master_bio, BIO_RW_BARRIER)) {
+		dev_err(DEV, "ASSERT FAILED would have set DP_HARDBARRIER\n");
+		/* dp_flags |= DP_HARDBARRIER; */
+	}
+	if (bio_rw_flagged(req->master_bio, BIO_RW_SYNCIO))
+		dp_flags |= DP_RW_SYNC;
+	/* for now handle SYNCIO and UNPLUG
+	 * as if they still were one and the same flag */
+	if (bio_rw_flagged(req->master_bio, BIO_RW_UNPLUG))
+		dp_flags |= DP_RW_SYNC;
+	if (mdev->state.conn >= C_SYNC_SOURCE &&
+	    mdev->state.conn <= C_PAUSED_SYNC_T)
+		dp_flags |= DP_MAY_SET_IN_SYNC;
+
+	p.dp_flags = cpu_to_be32(dp_flags);
+	set_bit(UNPLUG_REMOTE, &mdev->flags);
+	ok = (sizeof(p) ==
+		drbd_send(mdev, mdev->data.socket, &p, sizeof(p), MSG_MORE));
+	if (ok && dgs) {
+		dgb = mdev->int_dig_out;
+		drbd_csum(mdev, mdev->integrity_w_tfm, req->master_bio, dgb);
+		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+	}
+	if (ok) {
+		if (mdev->net_conf->wire_protocol == DRBD_PROT_A)
+			ok = _drbd_send_bio(mdev, req->master_bio);
+		else
+			ok = _drbd_send_zc_bio(mdev, req->master_bio);
+	}
+
+	drbd_put_data_sock(mdev);
+	return ok;
+}
+
+/* answer packet, used to send data back for read requests:
+ *  Peer       -> (diskless) R_PRIMARY   (P_DATA_REPLY)
+ *  C_SYNC_SOURCE -> C_SYNC_TARGET         (P_RS_DATA_REPLY)
+ */
+int drbd_send_block(struct drbd_conf *mdev, enum drbd_packets cmd,
+		    struct drbd_epoch_entry *e)
+{
+	int ok;
+	struct p_data p;
+	void *dgb;
+	int dgs;
+
+	dgs = (mdev->agreed_pro_version >= 87 && mdev->integrity_w_tfm) ?
+		crypto_hash_digestsize(mdev->integrity_w_tfm) : 0;
+
+	p.head.magic   = BE_DRBD_MAGIC;
+	p.head.command = cpu_to_be16(cmd);
+	p.head.length  =
+		cpu_to_be16(sizeof(p) - sizeof(struct p_header) + dgs + e->size);
+
+	p.sector   = cpu_to_be64(e->sector);
+	p.block_id = e->block_id;
+	/* p.seq_num  = 0;    No sequence numbers here.. */
+
+	/* Only called by our kernel thread.
+	 * This one may be interrupted by DRBD_SIG and/or DRBD_SIGKILL
+	 * in response to admin command or module unload.
+	 */
+	if (!drbd_get_data_sock(mdev))
+		return 0;
+
+	ok = sizeof(p) == drbd_send(mdev, mdev->data.socket, &p,
+					sizeof(p), MSG_MORE);
+	if (ok && dgs) {
+		dgb = mdev->int_dig_out;
+		drbd_csum(mdev, mdev->integrity_w_tfm, e->private_bio, dgb);
+		ok = drbd_send(mdev, mdev->data.socket, dgb, dgs, MSG_MORE);
+	}
+	if (ok)
+		ok = _drbd_send_zc_bio(mdev, e->private_bio);
+
+	drbd_put_data_sock(mdev);
+	return ok;
+}
+
+/*
+  drbd_send distinguishes two cases:
+
+  Packets sent via the data socket "sock"
+  and packets sent via the meta data socket "msock"
+
+		    sock                      msock
+  -----------------+-------------------------+------------------------------
+  timeout           conf.timeout / 2          conf.timeout / 2
+  timeout action    send a ping via msock     Abort communication
+					      and close all sockets
+*/
+
+/*
+ * you must have down()ed the appropriate [m]sock_mutex elsewhere!
+ */
+int drbd_send(struct drbd_conf *mdev, struct socket *sock,
+	      void *buf, size_t size, unsigned msg_flags)
+{
+	struct kvec iov;
+	struct msghdr msg;
+	int rv, sent = 0;
+
+	if (!sock)
+		return -1000;
+
+	/* THINK  if (signal_pending) return ... ? */
+
+	iov.iov_base = buf;
+	iov.iov_len  = size;
+
+	msg.msg_name       = NULL;
+	msg.msg_namelen    = 0;
+	msg.msg_control    = NULL;
+	msg.msg_controllen = 0;
+	msg.msg_flags      = msg_flags | MSG_NOSIGNAL;
+
+	if (sock == mdev->data.socket) {
+		mdev->ko_count = mdev->net_conf->ko_count;
+		drbd_update_congested(mdev);
+	}
+	do {
+		/* STRANGE
+		 * tcp_sendmsg does _not_ use its size parameter at all ?
+		 *
+		 * -EAGAIN on timeout, -EINTR on signal.
+		 */
+/* THINK
+ * do we need to block DRBD_SIG if sock == &meta.socket ??
+ * otherwise wake_asender() might interrupt some send_*Ack !
+ */
+		rv = kernel_sendmsg(sock, &msg, &iov, 1, size);
+		if (rv == -EAGAIN) {
+			if (we_should_drop_the_connection(mdev, sock))
+				break;
+			else
+				continue;
+		}
+		D_ASSERT(rv != 0);
+		if (rv == -EINTR) {
+			flush_signals(current);
+			rv = 0;
+		}
+		if (rv < 0)
+			break;
+		sent += rv;
+		iov.iov_base += rv;
+		iov.iov_len  -= rv;
+	} while (sent < size);
+
+	if (sock == mdev->data.socket)
+		clear_bit(NET_CONGESTED, &mdev->flags);
+
+	if (rv <= 0) {
+		if (rv != -EAGAIN) {
+			dev_err(DEV, "%s_sendmsg returned %d\n",
+			    sock == mdev->meta.socket ? "msock" : "sock",
+			    rv);
+			drbd_force_state(mdev, NS(conn, C_BROKEN_PIPE));
+		} else
+			drbd_force_state(mdev, NS(conn, C_TIMEOUT));
+	}
+
+	return sent;
+}
+
+static int drbd_open(struct block_device *bdev, fmode_t mode)
+{
+	struct drbd_conf *mdev = bdev->bd_disk->private_data;
+	unsigned long flags;
+	int rv = 0;
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	/* to have a stable mdev->state.role
+	 * and no race with updating open_cnt */
+
+	if (mdev->state.role != R_PRIMARY) {
+		if (mode & FMODE_WRITE)
+			rv = -EROFS;
+		else if (!allow_oos)
+			rv = -EMEDIUMTYPE;
+	}
+
+	if (!rv)
+		mdev->open_cnt++;
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	return rv;
+}
+
+static int drbd_release(struct gendisk *gd, fmode_t mode)
+{
+	struct drbd_conf *mdev = gd->private_data;
+	mdev->open_cnt--;
+	return 0;
+}
+
+static void drbd_unplug_fn(struct request_queue *q)
+{
+	struct drbd_conf *mdev = q->queuedata;
+
+	/* unplug FIRST */
+	spin_lock_irq(q->queue_lock);
+	blk_remove_plug(q);
+	spin_unlock_irq(q->queue_lock);
+
+	/* only if connected */
+	spin_lock_irq(&mdev->req_lock);
+	if (mdev->state.pdsk >= D_INCONSISTENT && mdev->state.conn >= C_CONNECTED) {
+		D_ASSERT(mdev->state.role == R_PRIMARY);
+		if (test_and_clear_bit(UNPLUG_REMOTE, &mdev->flags)) {
+			/* add to the data.work queue,
+			 * unless already queued.
+			 * XXX this might be a good addition to drbd_queue_work
+			 * anyways, to detect "double queuing" ... */
+			if (list_empty(&mdev->unplug_work.list))
+				drbd_queue_work(&mdev->data.work,
+						&mdev->unplug_work);
+		}
+	}
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (mdev->state.disk >= D_INCONSISTENT)
+		drbd_kick_lo(mdev);
+}
+
+static void drbd_set_defaults(struct drbd_conf *mdev)
+{
+	mdev->sync_conf.after      = DRBD_AFTER_DEF;
+	mdev->sync_conf.rate       = DRBD_RATE_DEF;
+	mdev->sync_conf.al_extents = DRBD_AL_EXTENTS_DEF;
+	mdev->state = (union drbd_state) {
+		{ .role = R_SECONDARY,
+		  .peer = R_UNKNOWN,
+		  .conn = C_STANDALONE,
+		  .disk = D_DISKLESS,
+		  .pdsk = D_UNKNOWN,
+		  .susp = 0
+		} };
+}
+
+void drbd_init_set_defaults(struct drbd_conf *mdev)
+{
+	/* the memset(,0,) did most of this.
+	 * note: only assignments, no allocation in here */
+
+	drbd_set_defaults(mdev);
+
+	/* for now, we do NOT yet support it,
+	 * even though we start some framework
+	 * to eventually support barriers */
+	set_bit(NO_BARRIER_SUPP, &mdev->flags);
+
+	atomic_set(&mdev->ap_bio_cnt, 0);
+	atomic_set(&mdev->ap_pending_cnt, 0);
+	atomic_set(&mdev->rs_pending_cnt, 0);
+	atomic_set(&mdev->unacked_cnt, 0);
+	atomic_set(&mdev->local_cnt, 0);
+	atomic_set(&mdev->net_cnt, 0);
+	atomic_set(&mdev->packet_seq, 0);
+	atomic_set(&mdev->pp_in_use, 0);
+
+	mutex_init(&mdev->md_io_mutex);
+	mutex_init(&mdev->data.mutex);
+	mutex_init(&mdev->meta.mutex);
+	sema_init(&mdev->data.work.s, 0);
+	sema_init(&mdev->meta.work.s, 0);
+	mutex_init(&mdev->state_mutex);
+
+	spin_lock_init(&mdev->data.work.q_lock);
+	spin_lock_init(&mdev->meta.work.q_lock);
+
+	spin_lock_init(&mdev->al_lock);
+	spin_lock_init(&mdev->req_lock);
+	spin_lock_init(&mdev->peer_seq_lock);
+	spin_lock_init(&mdev->epoch_lock);
+
+	INIT_LIST_HEAD(&mdev->active_ee);
+	INIT_LIST_HEAD(&mdev->sync_ee);
+	INIT_LIST_HEAD(&mdev->done_ee);
+	INIT_LIST_HEAD(&mdev->read_ee);
+	INIT_LIST_HEAD(&mdev->net_ee);
+	INIT_LIST_HEAD(&mdev->resync_reads);
+	INIT_LIST_HEAD(&mdev->data.work.q);
+	INIT_LIST_HEAD(&mdev->meta.work.q);
+	INIT_LIST_HEAD(&mdev->resync_work.list);
+	INIT_LIST_HEAD(&mdev->unplug_work.list);
+	INIT_LIST_HEAD(&mdev->md_sync_work.list);
+	INIT_LIST_HEAD(&mdev->bm_io_work.w.list);
+	mdev->resync_work.cb  = w_resync_inactive;
+	mdev->unplug_work.cb  = w_send_write_hint;
+	mdev->md_sync_work.cb = w_md_sync;
+	mdev->bm_io_work.w.cb = w_bitmap_io;
+	init_timer(&mdev->resync_timer);
+	init_timer(&mdev->md_sync_timer);
+	mdev->resync_timer.function = resync_timer_fn;
+	mdev->resync_timer.data = (unsigned long) mdev;
+	mdev->md_sync_timer.function = md_sync_timer_fn;
+	mdev->md_sync_timer.data = (unsigned long) mdev;
+
+	init_waitqueue_head(&mdev->misc_wait);
+	init_waitqueue_head(&mdev->state_wait);
+	init_waitqueue_head(&mdev->ee_wait);
+	init_waitqueue_head(&mdev->al_wait);
+	init_waitqueue_head(&mdev->seq_wait);
+
+	drbd_thread_init(mdev, &mdev->receiver, drbdd_init);
+	drbd_thread_init(mdev, &mdev->worker, drbd_worker);
+	drbd_thread_init(mdev, &mdev->asender, drbd_asender);
+
+	mdev->agreed_pro_version = PRO_VERSION_MAX;
+	mdev->write_ordering = WO_bio_barrier;
+	mdev->resync_wenr = LC_FREE;
+}
+
+void drbd_mdev_cleanup(struct drbd_conf *mdev)
+{
+	if (mdev->receiver.t_state != None)
+		dev_err(DEV, "ASSERT FAILED: receiver t_state == %d expected 0.\n",
+				mdev->receiver.t_state);
+
+	/* no need to lock it, I'm the only thread alive */
+	if (atomic_read(&mdev->current_epoch->epoch_size) !=  0)
+		dev_err(DEV, "epoch_size:%d\n", atomic_read(&mdev->current_epoch->epoch_size));
+	mdev->al_writ_cnt  =
+	mdev->bm_writ_cnt  =
+	mdev->read_cnt     =
+	mdev->recv_cnt     =
+	mdev->send_cnt     =
+	mdev->writ_cnt     =
+	mdev->p_size       =
+	mdev->rs_start     =
+	mdev->rs_total     =
+	mdev->rs_failed    =
+	mdev->rs_mark_left =
+	mdev->rs_mark_time = 0;
+	D_ASSERT(mdev->net_conf == NULL);
+
+	drbd_set_my_capacity(mdev, 0);
+	if (mdev->bitmap) {
+		/* maybe never allocated. */
+		drbd_bm_resize(mdev, 0);
+		drbd_bm_cleanup(mdev);
+	}
+
+	drbd_free_resources(mdev);
+
+	/*
+	 * currently we drbd_init_ee only on module load, so
+	 * we may do drbd_release_ee only on module unload!
+	 */
+	D_ASSERT(list_empty(&mdev->active_ee));
+	D_ASSERT(list_empty(&mdev->sync_ee));
+	D_ASSERT(list_empty(&mdev->done_ee));
+	D_ASSERT(list_empty(&mdev->read_ee));
+	D_ASSERT(list_empty(&mdev->net_ee));
+	D_ASSERT(list_empty(&mdev->resync_reads));
+	D_ASSERT(list_empty(&mdev->data.work.q));
+	D_ASSERT(list_empty(&mdev->meta.work.q));
+	D_ASSERT(list_empty(&mdev->resync_work.list));
+	D_ASSERT(list_empty(&mdev->unplug_work.list));
+
+}
+
+
+static void drbd_destroy_mempools(void)
+{
+	struct page *page;
+
+	while (drbd_pp_pool) {
+		page = drbd_pp_pool;
+		drbd_pp_pool = (struct page *)page_private(page);
+		__free_page(page);
+		drbd_pp_vacant--;
+	}
+
+	/* D_ASSERT(atomic_read(&drbd_pp_vacant)==0); */
+
+	if (drbd_ee_mempool)
+		mempool_destroy(drbd_ee_mempool);
+	if (drbd_request_mempool)
+		mempool_destroy(drbd_request_mempool);
+	if (drbd_ee_cache)
+		kmem_cache_destroy(drbd_ee_cache);
+	if (drbd_request_cache)
+		kmem_cache_destroy(drbd_request_cache);
+	if (drbd_bm_ext_cache)
+		kmem_cache_destroy(drbd_bm_ext_cache);
+	if (drbd_al_ext_cache)
+		kmem_cache_destroy(drbd_al_ext_cache);
+
+	drbd_ee_mempool      = NULL;
+	drbd_request_mempool = NULL;
+	drbd_ee_cache        = NULL;
+	drbd_request_cache   = NULL;
+	drbd_bm_ext_cache    = NULL;
+	drbd_al_ext_cache    = NULL;
+
+	return;
+}
+
+static int drbd_create_mempools(void)
+{
+	struct page *page;
+	const int number = (DRBD_MAX_SEGMENT_SIZE/PAGE_SIZE) * minor_count;
+	int i;
+
+	/* prepare our caches and mempools */
+	drbd_request_mempool = NULL;
+	drbd_ee_cache        = NULL;
+	drbd_request_cache   = NULL;
+	drbd_bm_ext_cache    = NULL;
+	drbd_al_ext_cache    = NULL;
+	drbd_pp_pool         = NULL;
+
+	/* caches */
+	drbd_request_cache = kmem_cache_create(
+		"drbd_req", sizeof(struct drbd_request), 0, 0, NULL);
+	if (drbd_request_cache == NULL)
+		goto Enomem;
+
+	drbd_ee_cache = kmem_cache_create(
+		"drbd_ee", sizeof(struct drbd_epoch_entry), 0, 0, NULL);
+	if (drbd_ee_cache == NULL)
+		goto Enomem;
+
+	drbd_bm_ext_cache = kmem_cache_create(
+		"drbd_bm", sizeof(struct bm_extent), 0, 0, NULL);
+	if (drbd_bm_ext_cache == NULL)
+		goto Enomem;
+
+	drbd_al_ext_cache = kmem_cache_create(
+		"drbd_al", sizeof(struct lc_element), 0, 0, NULL);
+	if (drbd_al_ext_cache == NULL)
+		goto Enomem;
+
+	/* mempools */
+	drbd_request_mempool = mempool_create(number,
+		mempool_alloc_slab, mempool_free_slab, drbd_request_cache);
+	if (drbd_request_mempool == NULL)
+		goto Enomem;
+
+	drbd_ee_mempool = mempool_create(number,
+		mempool_alloc_slab, mempool_free_slab, drbd_ee_cache);
+	if (drbd_request_mempool == NULL)
+		goto Enomem;
+
+	/* drbd's page pool */
+	spin_lock_init(&drbd_pp_lock);
+
+	for (i = 0; i < number; i++) {
+		page = alloc_page(GFP_HIGHUSER);
+		if (!page)
+			goto Enomem;
+		set_page_private(page, (unsigned long)drbd_pp_pool);
+		drbd_pp_pool = page;
+	}
+	drbd_pp_vacant = number;
+
+	return 0;
+
+Enomem:
+	drbd_destroy_mempools(); /* in case we allocated some */
+	return -ENOMEM;
+}
+
+static int drbd_notify_sys(struct notifier_block *this, unsigned long code,
+	void *unused)
+{
+	/* just so we have it.  you never know what interesting things we
+	 * might want to do here some day...
+	 */
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block drbd_notifier = {
+	.notifier_call = drbd_notify_sys,
+};
+
+static void drbd_release_ee_lists(struct drbd_conf *mdev)
+{
+	int rr;
+
+	rr = drbd_release_ee(mdev, &mdev->active_ee);
+	if (rr)
+		dev_err(DEV, "%d EEs in active list found!\n", rr);
+
+	rr = drbd_release_ee(mdev, &mdev->sync_ee);
+	if (rr)
+		dev_err(DEV, "%d EEs in sync list found!\n", rr);
+
+	rr = drbd_release_ee(mdev, &mdev->read_ee);
+	if (rr)
+		dev_err(DEV, "%d EEs in read list found!\n", rr);
+
+	rr = drbd_release_ee(mdev, &mdev->done_ee);
+	if (rr)
+		dev_err(DEV, "%d EEs in done list found!\n", rr);
+
+	rr = drbd_release_ee(mdev, &mdev->net_ee);
+	if (rr)
+		dev_err(DEV, "%d EEs in net list found!\n", rr);
+}
+
+/* caution. no locking.
+ * currently only used from module cleanup code. */
+static void drbd_delete_device(unsigned int minor)
+{
+	struct drbd_conf *mdev = minor_to_mdev(minor);
+
+	if (!mdev)
+		return;
+
+	/* paranoia asserts */
+	if (mdev->open_cnt != 0)
+		dev_err(DEV, "open_cnt = %d in %s:%u", mdev->open_cnt,
+				__FILE__ , __LINE__);
+
+	ERR_IF (!list_empty(&mdev->data.work.q)) {
+		struct list_head *lp;
+		list_for_each(lp, &mdev->data.work.q) {
+			dev_err(DEV, "lp = %p\n", lp);
+		}
+	};
+	/* end paranoia asserts */
+
+	del_gendisk(mdev->vdisk);
+
+	/* cleanup stuff that may have been allocated during
+	 * device (re-)configuration or state changes */
+
+	if (mdev->this_bdev)
+		bdput(mdev->this_bdev);
+
+	drbd_free_resources(mdev);
+
+	drbd_release_ee_lists(mdev);
+
+	/* should be free'd on disconnect? */
+	kfree(mdev->ee_hash);
+	/*
+	mdev->ee_hash_s = 0;
+	mdev->ee_hash = NULL;
+	*/
+
+	lc_destroy(mdev->act_log);
+	lc_destroy(mdev->resync);
+
+	kfree(mdev->p_uuid);
+	/* mdev->p_uuid = NULL; */
+
+	kfree(mdev->int_dig_out);
+	kfree(mdev->int_dig_in);
+	kfree(mdev->int_dig_vv);
+
+	/* cleanup the rest that has been
+	 * allocated from drbd_new_device
+	 * and actually free the mdev itself */
+	drbd_free_mdev(mdev);
+}
+
+static void drbd_cleanup(void)
+{
+	unsigned int i;
+
+	unregister_reboot_notifier(&drbd_notifier);
+
+	drbd_nl_cleanup();
+
+	if (minor_table) {
+		if (drbd_proc)
+			remove_proc_entry("drbd", NULL);
+		i = minor_count;
+		while (i--)
+			drbd_delete_device(i);
+		drbd_destroy_mempools();
+	}
+
+	kfree(minor_table);
+
+	unregister_blkdev(DRBD_MAJOR, "drbd");
+
+	printk(KERN_INFO "drbd: module cleanup done.\n");
+}
+
+/**
+ * drbd_congested() - Callback for pdflush
+ * @congested_data:	User data
+ * @bdi_bits:		Bits pdflush is currently interested in
+ *
+ * Returns 1<<BDI_async_congested and/or 1<<BDI_sync_congested if we are congested.
+ */
+static int drbd_congested(void *congested_data, int bdi_bits)
+{
+	struct drbd_conf *mdev = congested_data;
+	struct request_queue *q;
+	char reason = '-';
+	int r = 0;
+
+	if (!__inc_ap_bio_cond(mdev)) {
+		/* DRBD has frozen IO */
+		r = bdi_bits;
+		reason = 'd';
+		goto out;
+	}
+
+	if (get_ldev(mdev)) {
+		q = bdev_get_queue(mdev->ldev->backing_bdev);
+		r = bdi_congested(&q->backing_dev_info, bdi_bits);
+		put_ldev(mdev);
+		if (r)
+			reason = 'b';
+	}
+
+	if (bdi_bits & (1 << BDI_async_congested) && test_bit(NET_CONGESTED, &mdev->flags)) {
+		r |= (1 << BDI_async_congested);
+		reason = reason == 'b' ? 'a' : 'n';
+	}
+
+out:
+	mdev->congestion_reason = reason;
+	return r;
+}
+
+struct drbd_conf *drbd_new_device(unsigned int minor)
+{
+	struct drbd_conf *mdev;
+	struct gendisk *disk;
+	struct request_queue *q;
+
+	/* GFP_KERNEL, we are outside of all write-out paths */
+	mdev = kzalloc(sizeof(struct drbd_conf), GFP_KERNEL);
+	if (!mdev)
+		return NULL;
+	if (!zalloc_cpumask_var(&mdev->cpu_mask, GFP_KERNEL))
+		goto out_no_cpumask;
+
+	mdev->minor = minor;
+
+	drbd_init_set_defaults(mdev);
+
+	q = blk_alloc_queue(GFP_KERNEL);
+	if (!q)
+		goto out_no_q;
+	mdev->rq_queue = q;
+	q->queuedata   = mdev;
+	blk_queue_max_segment_size(q, DRBD_MAX_SEGMENT_SIZE);
+
+	disk = alloc_disk(1);
+	if (!disk)
+		goto out_no_disk;
+	mdev->vdisk = disk;
+
+	set_disk_ro(disk, TRUE);
+
+	disk->queue = q;
+	disk->major = DRBD_MAJOR;
+	disk->first_minor = minor;
+	disk->fops = &drbd_ops;
+	sprintf(disk->disk_name, "drbd%d", minor);
+	disk->private_data = mdev;
+
+	mdev->this_bdev = bdget(MKDEV(DRBD_MAJOR, minor));
+	/* we have no partitions. we contain only ourselves. */
+	mdev->this_bdev->bd_contains = mdev->this_bdev;
+
+	q->backing_dev_info.congested_fn = drbd_congested;
+	q->backing_dev_info.congested_data = mdev;
+
+	blk_queue_make_request(q, drbd_make_request_26);
+	blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
+	blk_queue_merge_bvec(q, drbd_merge_bvec);
+	q->queue_lock = &mdev->req_lock; /* needed since we use */
+		/* plugging on a queue, that actually has no requests! */
+	q->unplug_fn = drbd_unplug_fn;
+
+	mdev->md_io_page = alloc_page(GFP_KERNEL);
+	if (!mdev->md_io_page)
+		goto out_no_io_page;
+
+	if (drbd_bm_init(mdev))
+		goto out_no_bitmap;
+	/* no need to lock access, we are still initializing this minor device. */
+	if (!tl_init(mdev))
+		goto out_no_tl;
+
+	mdev->app_reads_hash = kzalloc(APP_R_HSIZE*sizeof(void *), GFP_KERNEL);
+	if (!mdev->app_reads_hash)
+		goto out_no_app_reads;
+
+	mdev->current_epoch = kzalloc(sizeof(struct drbd_epoch), GFP_KERNEL);
+	if (!mdev->current_epoch)
+		goto out_no_epoch;
+
+	INIT_LIST_HEAD(&mdev->current_epoch->list);
+	mdev->epochs = 1;
+
+	return mdev;
+
+/* out_whatever_else:
+	kfree(mdev->current_epoch); */
+out_no_epoch:
+	kfree(mdev->app_reads_hash);
+out_no_app_reads:
+	tl_cleanup(mdev);
+out_no_tl:
+	drbd_bm_cleanup(mdev);
+out_no_bitmap:
+	__free_page(mdev->md_io_page);
+out_no_io_page:
+	put_disk(disk);
+out_no_disk:
+	blk_cleanup_queue(q);
+out_no_q:
+	free_cpumask_var(mdev->cpu_mask);
+out_no_cpumask:
+	kfree(mdev);
+	return NULL;
+}
+
+/* counterpart of drbd_new_device.
+ * last part of drbd_delete_device. */
+void drbd_free_mdev(struct drbd_conf *mdev)
+{
+	kfree(mdev->current_epoch);
+	kfree(mdev->app_reads_hash);
+	tl_cleanup(mdev);
+	if (mdev->bitmap) /* should no longer be there. */
+		drbd_bm_cleanup(mdev);
+	__free_page(mdev->md_io_page);
+	put_disk(mdev->vdisk);
+	blk_cleanup_queue(mdev->rq_queue);
+	free_cpumask_var(mdev->cpu_mask);
+	kfree(mdev);
+}
+
+
+int __init drbd_init(void)
+{
+	int err;
+
+	if (sizeof(struct p_handshake) != 80) {
+		printk(KERN_ERR
+		       "drbd: never change the size or layout "
+		       "of the HandShake packet.\n");
+		return -EINVAL;
+	}
+
+	if (1 > minor_count || minor_count > 255) {
+		printk(KERN_ERR
+			"drbd: invalid minor_count (%d)\n", minor_count);
+#ifdef MODULE
+		return -EINVAL;
+#else
+		minor_count = 8;
+#endif
+	}
+
+	err = drbd_nl_init();
+	if (err)
+		return err;
+
+	err = register_blkdev(DRBD_MAJOR, "drbd");
+	if (err) {
+		printk(KERN_ERR
+		       "drbd: unable to register block device major %d\n",
+		       DRBD_MAJOR);
+		return err;
+	}
+
+	register_reboot_notifier(&drbd_notifier);
+
+	/*
+	 * allocate all necessary structs
+	 */
+	err = -ENOMEM;
+
+	init_waitqueue_head(&drbd_pp_wait);
+
+	drbd_proc = NULL; /* play safe for drbd_cleanup */
+	minor_table = kzalloc(sizeof(struct drbd_conf *)*minor_count,
+				GFP_KERNEL);
+	if (!minor_table)
+		goto Enomem;
+
+	err = drbd_create_mempools();
+	if (err)
+		goto Enomem;
+
+	drbd_proc = proc_create("drbd", S_IFREG | S_IRUGO , NULL, &drbd_proc_fops);
+	if (!drbd_proc)	{
+		printk(KERN_ERR "drbd: unable to register proc file\n");
+		goto Enomem;
+	}
+
+	rwlock_init(&global_state_lock);
+
+	printk(KERN_INFO "drbd: initialized. "
+	       "Version: " REL_VERSION " (api:%d/proto:%d-%d)\n",
+	       API_VERSION, PRO_VERSION_MIN, PRO_VERSION_MAX);
+	printk(KERN_INFO "drbd: %s\n", drbd_buildtag());
+	printk(KERN_INFO "drbd: registered as block device major %d\n",
+		DRBD_MAJOR);
+	printk(KERN_INFO "drbd: minor_table @ 0x%p\n", minor_table);
+
+	return 0; /* Success! */
+
+Enomem:
+	drbd_cleanup();
+	if (err == -ENOMEM)
+		/* currently always the case */
+		printk(KERN_ERR "drbd: ran out of memory\n");
+	else
+		printk(KERN_ERR "drbd: initialization failure\n");
+	return err;
+}
+
+void drbd_free_bc(struct drbd_backing_dev *ldev)
+{
+	if (ldev == NULL)
+		return;
+
+	bd_release(ldev->backing_bdev);
+	bd_release(ldev->md_bdev);
+
+	fput(ldev->lo_file);
+	fput(ldev->md_file);
+
+	kfree(ldev);
+}
+
+void drbd_free_sock(struct drbd_conf *mdev)
+{
+	if (mdev->data.socket) {
+		kernel_sock_shutdown(mdev->data.socket, SHUT_RDWR);
+		sock_release(mdev->data.socket);
+		mdev->data.socket = NULL;
+	}
+	if (mdev->meta.socket) {
+		kernel_sock_shutdown(mdev->meta.socket, SHUT_RDWR);
+		sock_release(mdev->meta.socket);
+		mdev->meta.socket = NULL;
+	}
+}
+
+
+void drbd_free_resources(struct drbd_conf *mdev)
+{
+	crypto_free_hash(mdev->csums_tfm);
+	mdev->csums_tfm = NULL;
+	crypto_free_hash(mdev->verify_tfm);
+	mdev->verify_tfm = NULL;
+	crypto_free_hash(mdev->cram_hmac_tfm);
+	mdev->cram_hmac_tfm = NULL;
+	crypto_free_hash(mdev->integrity_w_tfm);
+	mdev->integrity_w_tfm = NULL;
+	crypto_free_hash(mdev->integrity_r_tfm);
+	mdev->integrity_r_tfm = NULL;
+
+	drbd_free_sock(mdev);
+
+	__no_warn(local,
+		  drbd_free_bc(mdev->ldev);
+		  mdev->ldev = NULL;);
+}
+
+/* meta data management */
+
+struct meta_data_on_disk {
+	u64 la_size;           /* last agreed size. */
+	u64 uuid[UI_SIZE];   /* UUIDs. */
+	u64 device_uuid;
+	u64 reserved_u64_1;
+	u32 flags;             /* MDF */
+	u32 magic;
+	u32 md_size_sect;
+	u32 al_offset;         /* offset to this block */
+	u32 al_nr_extents;     /* important for restoring the AL */
+	      /* `-- act_log->nr_elements <-- sync_conf.al_extents */
+	u32 bm_offset;         /* offset to the bitmap, from here */
+	u32 bm_bytes_per_bit;  /* BM_BLOCK_SIZE */
+	u32 reserved_u32[4];
+
+} __packed;
+
+/**
+ * drbd_md_sync() - Writes the meta data super block if the MD_DIRTY flag bit is set
+ * @mdev:	DRBD device.
+ */
+void drbd_md_sync(struct drbd_conf *mdev)
+{
+	struct meta_data_on_disk *buffer;
+	sector_t sector;
+	int i;
+
+	if (!test_and_clear_bit(MD_DIRTY, &mdev->flags))
+		return;
+	del_timer(&mdev->md_sync_timer);
+
+	/* We use here D_FAILED and not D_ATTACHING because we try to write
+	 * metadata even if we detach due to a disk failure! */
+	if (!get_ldev_if_state(mdev, D_FAILED))
+		return;
+
+	mutex_lock(&mdev->md_io_mutex);
+	buffer = (struct meta_data_on_disk *)page_address(mdev->md_io_page);
+	memset(buffer, 0, 512);
+
+	buffer->la_size = cpu_to_be64(drbd_get_capacity(mdev->this_bdev));
+	for (i = UI_CURRENT; i < UI_SIZE; i++)
+		buffer->uuid[i] = cpu_to_be64(mdev->ldev->md.uuid[i]);
+	buffer->flags = cpu_to_be32(mdev->ldev->md.flags);
+	buffer->magic = cpu_to_be32(DRBD_MD_MAGIC);
+
+	buffer->md_size_sect  = cpu_to_be32(mdev->ldev->md.md_size_sect);
+	buffer->al_offset     = cpu_to_be32(mdev->ldev->md.al_offset);
+	buffer->al_nr_extents = cpu_to_be32(mdev->act_log->nr_elements);
+	buffer->bm_bytes_per_bit = cpu_to_be32(BM_BLOCK_SIZE);
+	buffer->device_uuid = cpu_to_be64(mdev->ldev->md.device_uuid);
+
+	buffer->bm_offset = cpu_to_be32(mdev->ldev->md.bm_offset);
+
+	D_ASSERT(drbd_md_ss__(mdev, mdev->ldev) == mdev->ldev->md.md_offset);
+	sector = mdev->ldev->md.md_offset;
+
+	if (drbd_md_sync_page_io(mdev, mdev->ldev, sector, WRITE)) {
+		clear_bit(MD_DIRTY, &mdev->flags);
+	} else {
+		/* this was a try anyways ... */
+		dev_err(DEV, "meta data update failed!\n");
+
+		drbd_chk_io_error(mdev, 1, TRUE);
+	}
+
+	/* Update mdev->ldev->md.la_size_sect,
+	 * since we updated it on metadata. */
+	mdev->ldev->md.la_size_sect = drbd_get_capacity(mdev->this_bdev);
+
+	mutex_unlock(&mdev->md_io_mutex);
+	put_ldev(mdev);
+}
+
+/**
+ * drbd_md_read() - Reads in the meta data super block
+ * @mdev:	DRBD device.
+ * @bdev:	Device from which the meta data should be read in.
+ *
+ * Return 0 (NO_ERROR) on success, and an enum drbd_ret_codes in case
+ * something goes wrong.  Currently only: ERR_IO_MD_DISK, ERR_MD_INVALID.
+ */
+int drbd_md_read(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
+{
+	struct meta_data_on_disk *buffer;
+	int i, rv = NO_ERROR;
+
+	if (!get_ldev_if_state(mdev, D_ATTACHING))
+		return ERR_IO_MD_DISK;
+
+	mutex_lock(&mdev->md_io_mutex);
+	buffer = (struct meta_data_on_disk *)page_address(mdev->md_io_page);
+
+	if (!drbd_md_sync_page_io(mdev, bdev, bdev->md.md_offset, READ)) {
+		/* NOTE: cant do normal error processing here as this is
+		   called BEFORE disk is attached */
+		dev_err(DEV, "Error while reading metadata.\n");
+		rv = ERR_IO_MD_DISK;
+		goto err;
+	}
+
+	if (be32_to_cpu(buffer->magic) != DRBD_MD_MAGIC) {
+		dev_err(DEV, "Error while reading metadata, magic not found.\n");
+		rv = ERR_MD_INVALID;
+		goto err;
+	}
+	if (be32_to_cpu(buffer->al_offset) != bdev->md.al_offset) {
+		dev_err(DEV, "unexpected al_offset: %d (expected %d)\n",
+		    be32_to_cpu(buffer->al_offset), bdev->md.al_offset);
+		rv = ERR_MD_INVALID;
+		goto err;
+	}
+	if (be32_to_cpu(buffer->bm_offset) != bdev->md.bm_offset) {
+		dev_err(DEV, "unexpected bm_offset: %d (expected %d)\n",
+		    be32_to_cpu(buffer->bm_offset), bdev->md.bm_offset);
+		rv = ERR_MD_INVALID;
+		goto err;
+	}
+	if (be32_to_cpu(buffer->md_size_sect) != bdev->md.md_size_sect) {
+		dev_err(DEV, "unexpected md_size: %u (expected %u)\n",
+		    be32_to_cpu(buffer->md_size_sect), bdev->md.md_size_sect);
+		rv = ERR_MD_INVALID;
+		goto err;
+	}
+
+	if (be32_to_cpu(buffer->bm_bytes_per_bit) != BM_BLOCK_SIZE) {
+		dev_err(DEV, "unexpected bm_bytes_per_bit: %u (expected %u)\n",
+		    be32_to_cpu(buffer->bm_bytes_per_bit), BM_BLOCK_SIZE);
+		rv = ERR_MD_INVALID;
+		goto err;
+	}
+
+	bdev->md.la_size_sect = be64_to_cpu(buffer->la_size);
+	for (i = UI_CURRENT; i < UI_SIZE; i++)
+		bdev->md.uuid[i] = be64_to_cpu(buffer->uuid[i]);
+	bdev->md.flags = be32_to_cpu(buffer->flags);
+	mdev->sync_conf.al_extents = be32_to_cpu(buffer->al_nr_extents);
+	bdev->md.device_uuid = be64_to_cpu(buffer->device_uuid);
+
+	if (mdev->sync_conf.al_extents < 7)
+		mdev->sync_conf.al_extents = 127;
+
+ err:
+	mutex_unlock(&mdev->md_io_mutex);
+	put_ldev(mdev);
+
+	return rv;
+}
+
+/**
+ * drbd_md_mark_dirty() - Mark meta data super block as dirty
+ * @mdev:	DRBD device.
+ *
+ * Call this function if you change anything that should be written to
+ * the meta-data super block. This function sets MD_DIRTY, and starts a
+ * timer that ensures that within five seconds you have to call drbd_md_sync().
+ */
+void drbd_md_mark_dirty(struct drbd_conf *mdev)
+{
+	set_bit(MD_DIRTY, &mdev->flags);
+	mod_timer(&mdev->md_sync_timer, jiffies + 5*HZ);
+}
+
+
+static void drbd_uuid_move_history(struct drbd_conf *mdev) __must_hold(local)
+{
+	int i;
+
+	for (i = UI_HISTORY_START; i < UI_HISTORY_END; i++)
+		mdev->ldev->md.uuid[i+1] = mdev->ldev->md.uuid[i];
+}
+
+void _drbd_uuid_set(struct drbd_conf *mdev, int idx, u64 val) __must_hold(local)
+{
+	if (idx == UI_CURRENT) {
+		if (mdev->state.role == R_PRIMARY)
+			val |= 1;
+		else
+			val &= ~((u64)1);
+
+		drbd_set_ed_uuid(mdev, val);
+	}
+
+	mdev->ldev->md.uuid[idx] = val;
+	drbd_md_mark_dirty(mdev);
+}
+
+
+void drbd_uuid_set(struct drbd_conf *mdev, int idx, u64 val) __must_hold(local)
+{
+	if (mdev->ldev->md.uuid[idx]) {
+		drbd_uuid_move_history(mdev);
+		mdev->ldev->md.uuid[UI_HISTORY_START] = mdev->ldev->md.uuid[idx];
+	}
+	_drbd_uuid_set(mdev, idx, val);
+}
+
+/**
+ * drbd_uuid_new_current() - Creates a new current UUID
+ * @mdev:	DRBD device.
+ *
+ * Creates a new current UUID, and rotates the old current UUID into
+ * the bitmap slot. Causes an incremental resync upon next connect.
+ */
+void drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local)
+{
+	u64 val;
+
+	dev_info(DEV, "Creating new current UUID\n");
+	D_ASSERT(mdev->ldev->md.uuid[UI_BITMAP] == 0);
+	mdev->ldev->md.uuid[UI_BITMAP] = mdev->ldev->md.uuid[UI_CURRENT];
+
+	get_random_bytes(&val, sizeof(u64));
+	_drbd_uuid_set(mdev, UI_CURRENT, val);
+}
+
+void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local)
+{
+	if (mdev->ldev->md.uuid[UI_BITMAP] == 0 && val == 0)
+		return;
+
+	if (val == 0) {
+		drbd_uuid_move_history(mdev);
+		mdev->ldev->md.uuid[UI_HISTORY_START] = mdev->ldev->md.uuid[UI_BITMAP];
+		mdev->ldev->md.uuid[UI_BITMAP] = 0;
+	} else {
+		if (mdev->ldev->md.uuid[UI_BITMAP])
+			dev_warn(DEV, "bm UUID already set");
+
+		mdev->ldev->md.uuid[UI_BITMAP] = val;
+		mdev->ldev->md.uuid[UI_BITMAP] &= ~((u64)1);
+
+	}
+	drbd_md_mark_dirty(mdev);
+}
+
+/**
+ * drbd_bmio_set_n_write() - io_fn for drbd_queue_bitmap_io() or drbd_bitmap_io()
+ * @mdev:	DRBD device.
+ *
+ * Sets all bits in the bitmap and writes the whole bitmap to stable storage.
+ */
+int drbd_bmio_set_n_write(struct drbd_conf *mdev)
+{
+	int rv = -EIO;
+
+	if (get_ldev_if_state(mdev, D_ATTACHING)) {
+		drbd_md_set_flag(mdev, MDF_FULL_SYNC);
+		drbd_md_sync(mdev);
+		drbd_bm_set_all(mdev);
+
+		rv = drbd_bm_write(mdev);
+
+		if (!rv) {
+			drbd_md_clear_flag(mdev, MDF_FULL_SYNC);
+			drbd_md_sync(mdev);
+		}
+
+		put_ldev(mdev);
+	}
+
+	return rv;
+}
+
+/**
+ * drbd_bmio_clear_n_write() - io_fn for drbd_queue_bitmap_io() or drbd_bitmap_io()
+ * @mdev:	DRBD device.
+ *
+ * Clears all bits in the bitmap and writes the whole bitmap to stable storage.
+ */
+int drbd_bmio_clear_n_write(struct drbd_conf *mdev)
+{
+	int rv = -EIO;
+
+	if (get_ldev_if_state(mdev, D_ATTACHING)) {
+		drbd_bm_clear_all(mdev);
+		rv = drbd_bm_write(mdev);
+		put_ldev(mdev);
+	}
+
+	return rv;
+}
+
+static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	struct bm_io_work *work = container_of(w, struct bm_io_work, w);
+	int rv;
+
+	D_ASSERT(atomic_read(&mdev->ap_bio_cnt) == 0);
+
+	drbd_bm_lock(mdev, work->why);
+	rv = work->io_fn(mdev);
+	drbd_bm_unlock(mdev);
+
+	clear_bit(BITMAP_IO, &mdev->flags);
+	wake_up(&mdev->misc_wait);
+
+	if (work->done)
+		work->done(mdev, rv);
+
+	clear_bit(BITMAP_IO_QUEUED, &mdev->flags);
+	work->why = NULL;
+
+	return 1;
+}
+
+/**
+ * drbd_queue_bitmap_io() - Queues an IO operation on the whole bitmap
+ * @mdev:	DRBD device.
+ * @io_fn:	IO callback to be called when bitmap IO is possible
+ * @done:	callback to be called after the bitmap IO was performed
+ * @why:	Descriptive text of the reason for doing the IO
+ *
+ * While IO on the bitmap happens we freeze application IO thus we ensure
+ * that drbd_set_out_of_sync() can not be called. This function MAY ONLY be
+ * called from worker context. It MUST NOT be used while a previous such
+ * work is still pending!
+ */
+void drbd_queue_bitmap_io(struct drbd_conf *mdev,
+			  int (*io_fn)(struct drbd_conf *),
+			  void (*done)(struct drbd_conf *, int),
+			  char *why)
+{
+	D_ASSERT(current == mdev->worker.task);
+
+	D_ASSERT(!test_bit(BITMAP_IO_QUEUED, &mdev->flags));
+	D_ASSERT(!test_bit(BITMAP_IO, &mdev->flags));
+	D_ASSERT(list_empty(&mdev->bm_io_work.w.list));
+	if (mdev->bm_io_work.why)
+		dev_err(DEV, "FIXME going to queue '%s' but '%s' still pending?\n",
+			why, mdev->bm_io_work.why);
+
+	mdev->bm_io_work.io_fn = io_fn;
+	mdev->bm_io_work.done = done;
+	mdev->bm_io_work.why = why;
+
+	set_bit(BITMAP_IO, &mdev->flags);
+	if (atomic_read(&mdev->ap_bio_cnt) == 0) {
+		if (list_empty(&mdev->bm_io_work.w.list)) {
+			set_bit(BITMAP_IO_QUEUED, &mdev->flags);
+			drbd_queue_work(&mdev->data.work, &mdev->bm_io_work.w);
+		} else
+			dev_err(DEV, "FIXME avoided double queuing bm_io_work\n");
+	}
+}
+
+/**
+ * drbd_bitmap_io() -  Does an IO operation on the whole bitmap
+ * @mdev:	DRBD device.
+ * @io_fn:	IO callback to be called when bitmap IO is possible
+ * @why:	Descriptive text of the reason for doing the IO
+ *
+ * freezes application IO while that the actual IO operations runs. This
+ * functions MAY NOT be called from worker context.
+ */
+int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why)
+{
+	int rv;
+
+	D_ASSERT(current != mdev->worker.task);
+
+	drbd_suspend_io(mdev);
+
+	drbd_bm_lock(mdev, why);
+	rv = io_fn(mdev);
+	drbd_bm_unlock(mdev);
+
+	drbd_resume_io(mdev);
+
+	return rv;
+}
+
+void drbd_md_set_flag(struct drbd_conf *mdev, int flag) __must_hold(local)
+{
+	if ((mdev->ldev->md.flags & flag) != flag) {
+		drbd_md_mark_dirty(mdev);
+		mdev->ldev->md.flags |= flag;
+	}
+}
+
+void drbd_md_clear_flag(struct drbd_conf *mdev, int flag) __must_hold(local)
+{
+	if ((mdev->ldev->md.flags & flag) != 0) {
+		drbd_md_mark_dirty(mdev);
+		mdev->ldev->md.flags &= ~flag;
+	}
+}
+int drbd_md_test_flag(struct drbd_backing_dev *bdev, int flag)
+{
+	return (bdev->md.flags & flag) != 0;
+}
+
+static void md_sync_timer_fn(unsigned long data)
+{
+	struct drbd_conf *mdev = (struct drbd_conf *) data;
+
+	drbd_queue_work_front(&mdev->data.work, &mdev->md_sync_work);
+}
+
+static int w_md_sync(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	dev_warn(DEV, "md_sync_timer expired! Worker calls drbd_md_sync().\n");
+	drbd_md_sync(mdev);
+
+	return 1;
+}
+
+#ifdef CONFIG_DRBD_FAULT_INJECTION
+/* Fault insertion support including random number generator shamelessly
+ * stolen from kernel/rcutorture.c */
+struct fault_random_state {
+	unsigned long state;
+	unsigned long count;
+};
+
+#define FAULT_RANDOM_MULT 39916801  /* prime */
+#define FAULT_RANDOM_ADD	479001701 /* prime */
+#define FAULT_RANDOM_REFRESH 10000
+
+/*
+ * Crude but fast random-number generator.  Uses a linear congruential
+ * generator, with occasional help from get_random_bytes().
+ */
+static unsigned long
+_drbd_fault_random(struct fault_random_state *rsp)
+{
+	long refresh;
+
+	if (--rsp->count < 0) {
+		get_random_bytes(&refresh, sizeof(refresh));
+		rsp->state += refresh;
+		rsp->count = FAULT_RANDOM_REFRESH;
+	}
+	rsp->state = rsp->state * FAULT_RANDOM_MULT + FAULT_RANDOM_ADD;
+	return swahw32(rsp->state);
+}
+
+static char *
+_drbd_fault_str(unsigned int type) {
+	static char *_faults[] = {
+		[DRBD_FAULT_MD_WR] = "Meta-data write",
+		[DRBD_FAULT_MD_RD] = "Meta-data read",
+		[DRBD_FAULT_RS_WR] = "Resync write",
+		[DRBD_FAULT_RS_RD] = "Resync read",
+		[DRBD_FAULT_DT_WR] = "Data write",
+		[DRBD_FAULT_DT_RD] = "Data read",
+		[DRBD_FAULT_DT_RA] = "Data read ahead",
+		[DRBD_FAULT_BM_ALLOC] = "BM allocation",
+		[DRBD_FAULT_AL_EE] = "EE allocation"
+	};
+
+	return (type < DRBD_FAULT_MAX) ? _faults[type] : "**Unknown**";
+}
+
+unsigned int
+_drbd_insert_fault(struct drbd_conf *mdev, unsigned int type)
+{
+	static struct fault_random_state rrs = {0, 0};
+
+	unsigned int ret = (
+		(fault_devs == 0 ||
+			((1 << mdev_to_minor(mdev)) & fault_devs) != 0) &&
+		(((_drbd_fault_random(&rrs) % 100) + 1) <= fault_rate));
+
+	if (ret) {
+		fault_count++;
+
+		if (printk_ratelimit())
+			dev_warn(DEV, "***Simulating %s failure\n",
+				_drbd_fault_str(type));
+	}
+
+	return ret;
+}
+#endif
+
+const char *drbd_buildtag(void)
+{
+	/* DRBD built from external sources has here a reference to the
+	   git hash of the source code. */
+
+	static char buildtag[38] = "\0uilt-in";
+
+	if (buildtag[0] == 0) {
+#ifdef CONFIG_MODULES
+		if (THIS_MODULE != NULL)
+			sprintf(buildtag, "srcversion: %-24s", THIS_MODULE->srcversion);
+		else
+#endif
+			buildtag[0] = 'b';
+	}
+
+	return buildtag;
+}
+
+module_init(drbd_init)
+module_exit(drbd_cleanup)
+
+EXPORT_SYMBOL(drbd_conn_str);
+EXPORT_SYMBOL(drbd_role_str);
+EXPORT_SYMBOL(drbd_disk_str);
+EXPORT_SYMBOL(drbd_set_st_err_str);
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
new file mode 100644
index 0000000..436a090
--- /dev/null
+++ b/drivers/block/drbd/drbd_nl.c
@@ -0,0 +1,2364 @@
+/*
+   drbd_nl.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/module.h>
+#include <linux/drbd.h>
+#include <linux/in.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/slab.h>
+#include <linux/connector.h>
+#include <linux/blkpg.h>
+#include <linux/cpumask.h>
+#include "drbd_int.h"
+#include "drbd_wrappers.h"
+#include <asm/unaligned.h>
+#include <linux/drbd_tag_magic.h>
+#include <linux/drbd_limits.h>
+
+static unsigned short *tl_add_blob(unsigned short *, enum drbd_tags, const void *, int);
+static unsigned short *tl_add_str(unsigned short *, enum drbd_tags, const char *);
+static unsigned short *tl_add_int(unsigned short *, enum drbd_tags, const void *);
+
+/* see get_sb_bdev and bd_claim */
+static char *drbd_m_holder = "Hands off! this is DRBD's meta data device.";
+
+/* Generate the tag_list to struct functions */
+#define NL_PACKET(name, number, fields) \
+static int name ## _from_tags(struct drbd_conf *mdev, \
+	unsigned short *tags, struct name *arg) __attribute__ ((unused)); \
+static int name ## _from_tags(struct drbd_conf *mdev, \
+	unsigned short *tags, struct name *arg) \
+{ \
+	int tag; \
+	int dlen; \
+	\
+	while ((tag = get_unaligned(tags++)) != TT_END) {	\
+		dlen = get_unaligned(tags++);			\
+		switch (tag_number(tag)) { \
+		fields \
+		default: \
+			if (tag & T_MANDATORY) { \
+				dev_err(DEV, "Unknown tag: %d\n", tag_number(tag)); \
+				return 0; \
+			} \
+		} \
+		tags = (unsigned short *)((char *)tags + dlen); \
+	} \
+	return 1; \
+}
+#define NL_INTEGER(pn, pr, member) \
+	case pn: /* D_ASSERT( tag_type(tag) == TT_INTEGER ); */ \
+		arg->member = get_unaligned((int *)(tags));	\
+		break;
+#define NL_INT64(pn, pr, member) \
+	case pn: /* D_ASSERT( tag_type(tag) == TT_INT64 ); */ \
+		arg->member = get_unaligned((u64 *)(tags));	\
+		break;
+#define NL_BIT(pn, pr, member) \
+	case pn: /* D_ASSERT( tag_type(tag) == TT_BIT ); */ \
+		arg->member = *(char *)(tags) ? 1 : 0; \
+		break;
+#define NL_STRING(pn, pr, member, len) \
+	case pn: /* D_ASSERT( tag_type(tag) == TT_STRING ); */ \
+		if (dlen > len) { \
+			dev_err(DEV, "arg too long: %s (%u wanted, max len: %u bytes)\n", \
+				#member, dlen, (unsigned int)len); \
+			return 0; \
+		} \
+		 arg->member ## _len = dlen; \
+		 memcpy(arg->member, tags, min_t(size_t, dlen, len)); \
+		 break;
+#include "linux/drbd_nl.h"
+
+/* Generate the struct to tag_list functions */
+#define NL_PACKET(name, number, fields) \
+static unsigned short* \
+name ## _to_tags(struct drbd_conf *mdev, \
+	struct name *arg, unsigned short *tags) __attribute__ ((unused)); \
+static unsigned short* \
+name ## _to_tags(struct drbd_conf *mdev, \
+	struct name *arg, unsigned short *tags) \
+{ \
+	fields \
+	return tags; \
+}
+
+#define NL_INTEGER(pn, pr, member) \
+	put_unaligned(pn | pr | TT_INTEGER, tags++);	\
+	put_unaligned(sizeof(int), tags++);		\
+	put_unaligned(arg->member, (int *)tags);	\
+	tags = (unsigned short *)((char *)tags+sizeof(int));
+#define NL_INT64(pn, pr, member) \
+	put_unaligned(pn | pr | TT_INT64, tags++);	\
+	put_unaligned(sizeof(u64), tags++);		\
+	put_unaligned(arg->member, (u64 *)tags);	\
+	tags = (unsigned short *)((char *)tags+sizeof(u64));
+#define NL_BIT(pn, pr, member) \
+	put_unaligned(pn | pr | TT_BIT, tags++);	\
+	put_unaligned(sizeof(char), tags++);		\
+	*(char *)tags = arg->member; \
+	tags = (unsigned short *)((char *)tags+sizeof(char));
+#define NL_STRING(pn, pr, member, len) \
+	put_unaligned(pn | pr | TT_STRING, tags++);	\
+	put_unaligned(arg->member ## _len, tags++);	\
+	memcpy(tags, arg->member, arg->member ## _len); \
+	tags = (unsigned short *)((char *)tags + arg->member ## _len);
+#include "linux/drbd_nl.h"
+
+void drbd_bcast_ev_helper(struct drbd_conf *mdev, char *helper_name);
+void drbd_nl_send_reply(struct cn_msg *, int);
+
+int drbd_khelper(struct drbd_conf *mdev, char *cmd)
+{
+	char *envp[] = { "HOME=/",
+			"TERM=linux",
+			"PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+			NULL, /* Will be set to address family */
+			NULL, /* Will be set to address */
+			NULL };
+
+	char mb[12], af[20], ad[60], *afs;
+	char *argv[] = {usermode_helper, cmd, mb, NULL };
+	int ret;
+
+	snprintf(mb, 12, "minor-%d", mdev_to_minor(mdev));
+
+	if (get_net_conf(mdev)) {
+		switch (((struct sockaddr *)mdev->net_conf->peer_addr)->sa_family) {
+		case AF_INET6:
+			afs = "ipv6";
+			snprintf(ad, 60, "DRBD_PEER_ADDRESS=%pI6",
+				 &((struct sockaddr_in6 *)mdev->net_conf->peer_addr)->sin6_addr);
+			break;
+		case AF_INET:
+			afs = "ipv4";
+			snprintf(ad, 60, "DRBD_PEER_ADDRESS=%pI4",
+				 &((struct sockaddr_in *)mdev->net_conf->peer_addr)->sin_addr);
+			break;
+		default:
+			afs = "ssocks";
+			snprintf(ad, 60, "DRBD_PEER_ADDRESS=%pI4",
+				 &((struct sockaddr_in *)mdev->net_conf->peer_addr)->sin_addr);
+		}
+		snprintf(af, 20, "DRBD_PEER_AF=%s", afs);
+		envp[3]=af;
+		envp[4]=ad;
+		put_net_conf(mdev);
+	}
+
+	dev_info(DEV, "helper command: %s %s %s\n", usermode_helper, cmd, mb);
+
+	drbd_bcast_ev_helper(mdev, cmd);
+	ret = call_usermodehelper(usermode_helper, argv, envp, 1);
+	if (ret)
+		dev_warn(DEV, "helper command: %s %s %s exit code %u (0x%x)\n",
+				usermode_helper, cmd, mb,
+				(ret >> 8) & 0xff, ret);
+	else
+		dev_info(DEV, "helper command: %s %s %s exit code %u (0x%x)\n",
+				usermode_helper, cmd, mb,
+				(ret >> 8) & 0xff, ret);
+
+	if (ret < 0) /* Ignore any ERRNOs we got. */
+		ret = 0;
+
+	return ret;
+}
+
+enum drbd_disk_state drbd_try_outdate_peer(struct drbd_conf *mdev)
+{
+	char *ex_to_string;
+	int r;
+	enum drbd_disk_state nps;
+	enum drbd_fencing_p fp;
+
+	D_ASSERT(mdev->state.pdsk == D_UNKNOWN);
+
+	if (get_ldev_if_state(mdev, D_CONSISTENT)) {
+		fp = mdev->ldev->dc.fencing;
+		put_ldev(mdev);
+	} else {
+		dev_warn(DEV, "Not fencing peer, I'm not even Consistent myself.\n");
+		return mdev->state.pdsk;
+	}
+
+	if (fp == FP_STONITH)
+		_drbd_request_state(mdev, NS(susp, 1), CS_WAIT_COMPLETE);
+
+	r = drbd_khelper(mdev, "fence-peer");
+
+	switch ((r>>8) & 0xff) {
+	case 3: /* peer is inconsistent */
+		ex_to_string = "peer is inconsistent or worse";
+		nps = D_INCONSISTENT;
+		break;
+	case 4: /* peer got outdated, or was already outdated */
+		ex_to_string = "peer was fenced";
+		nps = D_OUTDATED;
+		break;
+	case 5: /* peer was down */
+		if (mdev->state.disk == D_UP_TO_DATE) {
+			/* we will(have) create(d) a new UUID anyways... */
+			ex_to_string = "peer is unreachable, assumed to be dead";
+			nps = D_OUTDATED;
+		} else {
+			ex_to_string = "peer unreachable, doing nothing since disk != UpToDate";
+			nps = mdev->state.pdsk;
+		}
+		break;
+	case 6: /* Peer is primary, voluntarily outdate myself.
+		 * This is useful when an unconnected R_SECONDARY is asked to
+		 * become R_PRIMARY, but finds the other peer being active. */
+		ex_to_string = "peer is active";
+		dev_warn(DEV, "Peer is primary, outdating myself.\n");
+		nps = D_UNKNOWN;
+		_drbd_request_state(mdev, NS(disk, D_OUTDATED), CS_WAIT_COMPLETE);
+		break;
+	case 7:
+		if (fp != FP_STONITH)
+			dev_err(DEV, "fence-peer() = 7 && fencing != Stonith !!!\n");
+		ex_to_string = "peer was stonithed";
+		nps = D_OUTDATED;
+		break;
+	default:
+		/* The script is broken ... */
+		nps = D_UNKNOWN;
+		dev_err(DEV, "fence-peer helper broken, returned %d\n", (r>>8)&0xff);
+		return nps;
+	}
+
+	dev_info(DEV, "fence-peer helper returned %d (%s)\n",
+			(r>>8) & 0xff, ex_to_string);
+	return nps;
+}
+
+
+int drbd_set_role(struct drbd_conf *mdev, enum drbd_role new_role, int force)
+{
+	const int max_tries = 4;
+	int r = 0;
+	int try = 0;
+	int forced = 0;
+	union drbd_state mask, val;
+	enum drbd_disk_state nps;
+
+	if (new_role == R_PRIMARY)
+		request_ping(mdev); /* Detect a dead peer ASAP */
+
+	mutex_lock(&mdev->state_mutex);
+
+	mask.i = 0; mask.role = R_MASK;
+	val.i  = 0; val.role  = new_role;
+
+	while (try++ < max_tries) {
+		r = _drbd_request_state(mdev, mask, val, CS_WAIT_COMPLETE);
+
+		/* in case we first succeeded to outdate,
+		 * but now suddenly could establish a connection */
+		if (r == SS_CW_FAILED_BY_PEER && mask.pdsk != 0) {
+			val.pdsk = 0;
+			mask.pdsk = 0;
+			continue;
+		}
+
+		if (r == SS_NO_UP_TO_DATE_DISK && force &&
+		    (mdev->state.disk == D_INCONSISTENT ||
+		     mdev->state.disk == D_OUTDATED)) {
+			mask.disk = D_MASK;
+			val.disk  = D_UP_TO_DATE;
+			forced = 1;
+			continue;
+		}
+
+		if (r == SS_NO_UP_TO_DATE_DISK &&
+		    mdev->state.disk == D_CONSISTENT && mask.pdsk == 0) {
+			D_ASSERT(mdev->state.pdsk == D_UNKNOWN);
+			nps = drbd_try_outdate_peer(mdev);
+
+			if (nps == D_OUTDATED || nps == D_INCONSISTENT) {
+				val.disk = D_UP_TO_DATE;
+				mask.disk = D_MASK;
+			}
+
+			val.pdsk = nps;
+			mask.pdsk = D_MASK;
+
+			continue;
+		}
+
+		if (r == SS_NOTHING_TO_DO)
+			goto fail;
+		if (r == SS_PRIMARY_NOP && mask.pdsk == 0) {
+			nps = drbd_try_outdate_peer(mdev);
+
+			if (force && nps > D_OUTDATED) {
+				dev_warn(DEV, "Forced into split brain situation!\n");
+				nps = D_OUTDATED;
+			}
+
+			mask.pdsk = D_MASK;
+			val.pdsk  = nps;
+
+			continue;
+		}
+		if (r == SS_TWO_PRIMARIES) {
+			/* Maybe the peer is detected as dead very soon...
+			   retry at most once more in this case. */
+			__set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout((mdev->net_conf->ping_timeo+1)*HZ/10);
+			if (try < max_tries)
+				try = max_tries - 1;
+			continue;
+		}
+		if (r < SS_SUCCESS) {
+			r = _drbd_request_state(mdev, mask, val,
+						CS_VERBOSE + CS_WAIT_COMPLETE);
+			if (r < SS_SUCCESS)
+				goto fail;
+		}
+		break;
+	}
+
+	if (r < SS_SUCCESS)
+		goto fail;
+
+	if (forced)
+		dev_warn(DEV, "Forced to consider local data as UpToDate!\n");
+
+	/* Wait until nothing is on the fly :) */
+	wait_event(mdev->misc_wait, atomic_read(&mdev->ap_pending_cnt) == 0);
+
+	if (new_role == R_SECONDARY) {
+		set_disk_ro(mdev->vdisk, TRUE);
+		if (get_ldev(mdev)) {
+			mdev->ldev->md.uuid[UI_CURRENT] &= ~(u64)1;
+			put_ldev(mdev);
+		}
+	} else {
+		if (get_net_conf(mdev)) {
+			mdev->net_conf->want_lose = 0;
+			put_net_conf(mdev);
+		}
+		set_disk_ro(mdev->vdisk, FALSE);
+		if (get_ldev(mdev)) {
+			if (((mdev->state.conn < C_CONNECTED ||
+			       mdev->state.pdsk <= D_FAILED)
+			      && mdev->ldev->md.uuid[UI_BITMAP] == 0) || forced)
+				drbd_uuid_new_current(mdev);
+
+			mdev->ldev->md.uuid[UI_CURRENT] |=  (u64)1;
+			put_ldev(mdev);
+		}
+	}
+
+	if ((new_role == R_SECONDARY) && get_ldev(mdev)) {
+		drbd_al_to_on_disk_bm(mdev);
+		put_ldev(mdev);
+	}
+
+	if (mdev->state.conn >= C_WF_REPORT_PARAMS) {
+		/* if this was forced, we should consider sync */
+		if (forced)
+			drbd_send_uuids(mdev);
+		drbd_send_state(mdev);
+	}
+
+	drbd_md_sync(mdev);
+
+	kobject_uevent(&disk_to_dev(mdev->vdisk)->kobj, KOBJ_CHANGE);
+ fail:
+	mutex_unlock(&mdev->state_mutex);
+	return r;
+}
+
+
+static int drbd_nl_primary(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			   struct drbd_nl_cfg_reply *reply)
+{
+	struct primary primary_args;
+
+	memset(&primary_args, 0, sizeof(struct primary));
+	if (!primary_from_tags(mdev, nlp->tag_list, &primary_args)) {
+		reply->ret_code = ERR_MANDATORY_TAG;
+		return 0;
+	}
+
+	reply->ret_code =
+		drbd_set_role(mdev, R_PRIMARY, primary_args.overwrite_peer);
+
+	return 0;
+}
+
+static int drbd_nl_secondary(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			     struct drbd_nl_cfg_reply *reply)
+{
+	reply->ret_code = drbd_set_role(mdev, R_SECONDARY, 0);
+
+	return 0;
+}
+
+/* initializes the md.*_offset members, so we are able to find
+ * the on disk meta data */
+static void drbd_md_set_sector_offsets(struct drbd_conf *mdev,
+				       struct drbd_backing_dev *bdev)
+{
+	sector_t md_size_sect = 0;
+	switch (bdev->dc.meta_dev_idx) {
+	default:
+		/* v07 style fixed size indexed meta data */
+		bdev->md.md_size_sect = MD_RESERVED_SECT;
+		bdev->md.md_offset = drbd_md_ss__(mdev, bdev);
+		bdev->md.al_offset = MD_AL_OFFSET;
+		bdev->md.bm_offset = MD_BM_OFFSET;
+		break;
+	case DRBD_MD_INDEX_FLEX_EXT:
+		/* just occupy the full device; unit: sectors */
+		bdev->md.md_size_sect = drbd_get_capacity(bdev->md_bdev);
+		bdev->md.md_offset = 0;
+		bdev->md.al_offset = MD_AL_OFFSET;
+		bdev->md.bm_offset = MD_BM_OFFSET;
+		break;
+	case DRBD_MD_INDEX_INTERNAL:
+	case DRBD_MD_INDEX_FLEX_INT:
+		bdev->md.md_offset = drbd_md_ss__(mdev, bdev);
+		/* al size is still fixed */
+		bdev->md.al_offset = -MD_AL_MAX_SIZE;
+		/* we need (slightly less than) ~ this much bitmap sectors: */
+		md_size_sect = drbd_get_capacity(bdev->backing_bdev);
+		md_size_sect = ALIGN(md_size_sect, BM_SECT_PER_EXT);
+		md_size_sect = BM_SECT_TO_EXT(md_size_sect);
+		md_size_sect = ALIGN(md_size_sect, 8);
+
+		/* plus the "drbd meta data super block",
+		 * and the activity log; */
+		md_size_sect += MD_BM_OFFSET;
+
+		bdev->md.md_size_sect = md_size_sect;
+		/* bitmap offset is adjusted by 'super' block size */
+		bdev->md.bm_offset   = -md_size_sect + MD_AL_OFFSET;
+		break;
+	}
+}
+
+char *ppsize(char *buf, unsigned long long size)
+{
+	/* Needs 9 bytes at max. */
+	static char units[] = { 'K', 'M', 'G', 'T', 'P', 'E' };
+	int base = 0;
+	while (size >= 10000) {
+		/* shift + round */
+		size = (size >> 10) + !!(size & (1<<9));
+		base++;
+	}
+	sprintf(buf, "%lu %cB", (long)size, units[base]);
+
+	return buf;
+}
+
+/* there is still a theoretical deadlock when called from receiver
+ * on an D_INCONSISTENT R_PRIMARY:
+ *  remote READ does inc_ap_bio, receiver would need to receive answer
+ *  packet from remote to dec_ap_bio again.
+ *  receiver receive_sizes(), comes here,
+ *  waits for ap_bio_cnt == 0. -> deadlock.
+ * but this cannot happen, actually, because:
+ *  R_PRIMARY D_INCONSISTENT, and peer's disk is unreachable
+ *  (not connected, or bad/no disk on peer):
+ *  see drbd_fail_request_early, ap_bio_cnt is zero.
+ *  R_PRIMARY D_INCONSISTENT, and C_SYNC_TARGET:
+ *  peer may not initiate a resize.
+ */
+void drbd_suspend_io(struct drbd_conf *mdev)
+{
+	set_bit(SUSPEND_IO, &mdev->flags);
+	wait_event(mdev->misc_wait, !atomic_read(&mdev->ap_bio_cnt));
+}
+
+void drbd_resume_io(struct drbd_conf *mdev)
+{
+	clear_bit(SUSPEND_IO, &mdev->flags);
+	wake_up(&mdev->misc_wait);
+}
+
+/**
+ * drbd_determine_dev_size() -  Sets the right device size obeying all constraints
+ * @mdev:	DRBD device.
+ *
+ * Returns 0 on success, negative return values indicate errors.
+ * You should call drbd_md_sync() after calling this function.
+ */
+enum determine_dev_size drbd_determin_dev_size(struct drbd_conf *mdev) __must_hold(local)
+{
+	sector_t prev_first_sect, prev_size; /* previous meta location */
+	sector_t la_size;
+	sector_t size;
+	char ppb[10];
+
+	int md_moved, la_size_changed;
+	enum determine_dev_size rv = unchanged;
+
+	/* race:
+	 * application request passes inc_ap_bio,
+	 * but then cannot get an AL-reference.
+	 * this function later may wait on ap_bio_cnt == 0. -> deadlock.
+	 *
+	 * to avoid that:
+	 * Suspend IO right here.
+	 * still lock the act_log to not trigger ASSERTs there.
+	 */
+	drbd_suspend_io(mdev);
+
+	/* no wait necessary anymore, actually we could assert that */
+	wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
+
+	prev_first_sect = drbd_md_first_sector(mdev->ldev);
+	prev_size = mdev->ldev->md.md_size_sect;
+	la_size = mdev->ldev->md.la_size_sect;
+
+	/* TODO: should only be some assert here, not (re)init... */
+	drbd_md_set_sector_offsets(mdev, mdev->ldev);
+
+	size = drbd_new_dev_size(mdev, mdev->ldev);
+
+	if (drbd_get_capacity(mdev->this_bdev) != size ||
+	    drbd_bm_capacity(mdev) != size) {
+		int err;
+		err = drbd_bm_resize(mdev, size);
+		if (unlikely(err)) {
+			/* currently there is only one error: ENOMEM! */
+			size = drbd_bm_capacity(mdev)>>1;
+			if (size == 0) {
+				dev_err(DEV, "OUT OF MEMORY! "
+				    "Could not allocate bitmap!\n");
+			} else {
+				dev_err(DEV, "BM resizing failed. "
+				    "Leaving size unchanged at size = %lu KB\n",
+				    (unsigned long)size);
+			}
+			rv = dev_size_error;
+		}
+		/* racy, see comments above. */
+		drbd_set_my_capacity(mdev, size);
+		mdev->ldev->md.la_size_sect = size;
+		dev_info(DEV, "size = %s (%llu KB)\n", ppsize(ppb, size>>1),
+		     (unsigned long long)size>>1);
+	}
+	if (rv == dev_size_error)
+		goto out;
+
+	la_size_changed = (la_size != mdev->ldev->md.la_size_sect);
+
+	md_moved = prev_first_sect != drbd_md_first_sector(mdev->ldev)
+		|| prev_size	   != mdev->ldev->md.md_size_sect;
+
+	if (la_size_changed || md_moved) {
+		drbd_al_shrink(mdev); /* All extents inactive. */
+		dev_info(DEV, "Writing the whole bitmap, %s\n",
+			 la_size_changed && md_moved ? "size changed and md moved" :
+			 la_size_changed ? "size changed" : "md moved");
+		rv = drbd_bitmap_io(mdev, &drbd_bm_write, "size changed"); /* does drbd_resume_io() ! */
+		drbd_md_mark_dirty(mdev);
+	}
+
+	if (size > la_size)
+		rv = grew;
+	if (size < la_size)
+		rv = shrunk;
+out:
+	lc_unlock(mdev->act_log);
+	wake_up(&mdev->al_wait);
+	drbd_resume_io(mdev);
+
+	return rv;
+}
+
+sector_t
+drbd_new_dev_size(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
+{
+	sector_t p_size = mdev->p_size;   /* partner's disk size. */
+	sector_t la_size = bdev->md.la_size_sect; /* last agreed size. */
+	sector_t m_size; /* my size */
+	sector_t u_size = bdev->dc.disk_size; /* size requested by user. */
+	sector_t size = 0;
+
+	m_size = drbd_get_max_capacity(bdev);
+
+	if (p_size && m_size) {
+		size = min_t(sector_t, p_size, m_size);
+	} else {
+		if (la_size) {
+			size = la_size;
+			if (m_size && m_size < size)
+				size = m_size;
+			if (p_size && p_size < size)
+				size = p_size;
+		} else {
+			if (m_size)
+				size = m_size;
+			if (p_size)
+				size = p_size;
+		}
+	}
+
+	if (size == 0)
+		dev_err(DEV, "Both nodes diskless!\n");
+
+	if (u_size) {
+		if (u_size > size)
+			dev_err(DEV, "Requested disk size is too big (%lu > %lu)\n",
+			    (unsigned long)u_size>>1, (unsigned long)size>>1);
+		else
+			size = u_size;
+	}
+
+	return size;
+}
+
+/**
+ * drbd_check_al_size() - Ensures that the AL is of the right size
+ * @mdev:	DRBD device.
+ *
+ * Returns -EBUSY if current al lru is still used, -ENOMEM when allocation
+ * failed, and 0 on success. You should call drbd_md_sync() after you called
+ * this function.
+ */
+static int drbd_check_al_size(struct drbd_conf *mdev)
+{
+	struct lru_cache *n, *t;
+	struct lc_element *e;
+	unsigned int in_use;
+	int i;
+
+	ERR_IF(mdev->sync_conf.al_extents < 7)
+		mdev->sync_conf.al_extents = 127;
+
+	if (mdev->act_log &&
+	    mdev->act_log->nr_elements == mdev->sync_conf.al_extents)
+		return 0;
+
+	in_use = 0;
+	t = mdev->act_log;
+	n = lc_create("act_log", drbd_al_ext_cache,
+		mdev->sync_conf.al_extents, sizeof(struct lc_element), 0);
+
+	if (n == NULL) {
+		dev_err(DEV, "Cannot allocate act_log lru!\n");
+		return -ENOMEM;
+	}
+	spin_lock_irq(&mdev->al_lock);
+	if (t) {
+		for (i = 0; i < t->nr_elements; i++) {
+			e = lc_element_by_index(t, i);
+			if (e->refcnt)
+				dev_err(DEV, "refcnt(%d)==%d\n",
+				    e->lc_number, e->refcnt);
+			in_use += e->refcnt;
+		}
+	}
+	if (!in_use)
+		mdev->act_log = n;
+	spin_unlock_irq(&mdev->al_lock);
+	if (in_use) {
+		dev_err(DEV, "Activity log still in use!\n");
+		lc_destroy(n);
+		return -EBUSY;
+	} else {
+		if (t)
+			lc_destroy(t);
+	}
+	drbd_md_mark_dirty(mdev); /* we changed mdev->act_log->nr_elemens */
+	return 0;
+}
+
+void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int max_seg_s) __must_hold(local)
+{
+	struct request_queue * const q = mdev->rq_queue;
+	struct request_queue * const b = mdev->ldev->backing_bdev->bd_disk->queue;
+	int max_segments = mdev->ldev->dc.max_bio_bvecs;
+
+	if (b->merge_bvec_fn && !mdev->ldev->dc.use_bmbv)
+		max_seg_s = PAGE_SIZE;
+
+	max_seg_s = min(queue_max_sectors(b) * queue_logical_block_size(b), max_seg_s);
+
+	blk_queue_max_sectors(q, max_seg_s >> 9);
+	blk_queue_max_phys_segments(q, max_segments ? max_segments : MAX_PHYS_SEGMENTS);
+	blk_queue_max_hw_segments(q, max_segments ? max_segments : MAX_HW_SEGMENTS);
+	blk_queue_max_segment_size(q, max_seg_s);
+	blk_queue_logical_block_size(q, 512);
+	blk_queue_segment_boundary(q, PAGE_SIZE-1);
+	blk_stack_limits(&q->limits, &b->limits, 0);
+
+	if (b->merge_bvec_fn)
+		dev_warn(DEV, "Backing device's merge_bvec_fn() = %p\n",
+		     b->merge_bvec_fn);
+	dev_info(DEV, "max_segment_size ( = BIO size ) = %u\n", queue_max_segment_size(q));
+
+	if (q->backing_dev_info.ra_pages != b->backing_dev_info.ra_pages) {
+		dev_info(DEV, "Adjusting my ra_pages to backing device's (%lu -> %lu)\n",
+		     q->backing_dev_info.ra_pages,
+		     b->backing_dev_info.ra_pages);
+		q->backing_dev_info.ra_pages = b->backing_dev_info.ra_pages;
+	}
+}
+
+/* serialize deconfig (worker exiting, doing cleanup)
+ * and reconfig (drbdsetup disk, drbdsetup net)
+ *
+ * wait for a potentially exiting worker, then restart it,
+ * or start a new one.
+ */
+static void drbd_reconfig_start(struct drbd_conf *mdev)
+{
+	wait_event(mdev->state_wait, !test_and_set_bit(CONFIG_PENDING, &mdev->flags));
+	wait_event(mdev->state_wait, !test_bit(DEVICE_DYING, &mdev->flags));
+	drbd_thread_start(&mdev->worker);
+}
+
+/* if still unconfigured, stops worker again.
+ * if configured now, clears CONFIG_PENDING.
+ * wakes potential waiters */
+static void drbd_reconfig_done(struct drbd_conf *mdev)
+{
+	spin_lock_irq(&mdev->req_lock);
+	if (mdev->state.disk == D_DISKLESS &&
+	    mdev->state.conn == C_STANDALONE &&
+	    mdev->state.role == R_SECONDARY) {
+		set_bit(DEVICE_DYING, &mdev->flags);
+		drbd_thread_stop_nowait(&mdev->worker);
+	} else
+		clear_bit(CONFIG_PENDING, &mdev->flags);
+	spin_unlock_irq(&mdev->req_lock);
+	wake_up(&mdev->state_wait);
+}
+
+/* does always return 0;
+ * interesting return code is in reply->ret_code */
+static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			     struct drbd_nl_cfg_reply *reply)
+{
+	enum drbd_ret_codes retcode;
+	enum determine_dev_size dd;
+	sector_t max_possible_sectors;
+	sector_t min_md_device_sectors;
+	struct drbd_backing_dev *nbc = NULL; /* new_backing_conf */
+	struct inode *inode, *inode2;
+	struct lru_cache *resync_lru = NULL;
+	union drbd_state ns, os;
+	int rv;
+	int cp_discovered = 0;
+	int logical_block_size;
+
+	drbd_reconfig_start(mdev);
+
+	/* if you want to reconfigure, please tear down first */
+	if (mdev->state.disk > D_DISKLESS) {
+		retcode = ERR_DISK_CONFIGURED;
+		goto fail;
+	}
+
+	/* allocation not in the IO path, cqueue thread context */
+	nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL);
+	if (!nbc) {
+		retcode = ERR_NOMEM;
+		goto fail;
+	}
+
+	nbc->dc.disk_size     = DRBD_DISK_SIZE_SECT_DEF;
+	nbc->dc.on_io_error   = DRBD_ON_IO_ERROR_DEF;
+	nbc->dc.fencing       = DRBD_FENCING_DEF;
+	nbc->dc.max_bio_bvecs = DRBD_MAX_BIO_BVECS_DEF;
+
+	if (!disk_conf_from_tags(mdev, nlp->tag_list, &nbc->dc)) {
+		retcode = ERR_MANDATORY_TAG;
+		goto fail;
+	}
+
+	if (nbc->dc.meta_dev_idx < DRBD_MD_INDEX_FLEX_INT) {
+		retcode = ERR_MD_IDX_INVALID;
+		goto fail;
+	}
+
+	nbc->lo_file = filp_open(nbc->dc.backing_dev, O_RDWR, 0);
+	if (IS_ERR(nbc->lo_file)) {
+		dev_err(DEV, "open(\"%s\") failed with %ld\n", nbc->dc.backing_dev,
+		    PTR_ERR(nbc->lo_file));
+		nbc->lo_file = NULL;
+		retcode = ERR_OPEN_DISK;
+		goto fail;
+	}
+
+	inode = nbc->lo_file->f_dentry->d_inode;
+
+	if (!S_ISBLK(inode->i_mode)) {
+		retcode = ERR_DISK_NOT_BDEV;
+		goto fail;
+	}
+
+	nbc->md_file = filp_open(nbc->dc.meta_dev, O_RDWR, 0);
+	if (IS_ERR(nbc->md_file)) {
+		dev_err(DEV, "open(\"%s\") failed with %ld\n", nbc->dc.meta_dev,
+		    PTR_ERR(nbc->md_file));
+		nbc->md_file = NULL;
+		retcode = ERR_OPEN_MD_DISK;
+		goto fail;
+	}
+
+	inode2 = nbc->md_file->f_dentry->d_inode;
+
+	if (!S_ISBLK(inode2->i_mode)) {
+		retcode = ERR_MD_NOT_BDEV;
+		goto fail;
+	}
+
+	nbc->backing_bdev = inode->i_bdev;
+	if (bd_claim(nbc->backing_bdev, mdev)) {
+		printk(KERN_ERR "drbd: bd_claim(%p,%p); failed [%p;%p;%u]\n",
+		       nbc->backing_bdev, mdev,
+		       nbc->backing_bdev->bd_holder,
+		       nbc->backing_bdev->bd_contains->bd_holder,
+		       nbc->backing_bdev->bd_holders);
+		retcode = ERR_BDCLAIM_DISK;
+		goto fail;
+	}
+
+	resync_lru = lc_create("resync", drbd_bm_ext_cache,
+			61, sizeof(struct bm_extent),
+			offsetof(struct bm_extent, lce));
+	if (!resync_lru) {
+		retcode = ERR_NOMEM;
+		goto release_bdev_fail;
+	}
+
+	/* meta_dev_idx >= 0: external fixed size,
+	 * possibly multiple drbd sharing one meta device.
+	 * TODO in that case, paranoia check that [md_bdev, meta_dev_idx] is
+	 * not yet used by some other drbd minor!
+	 * (if you use drbd.conf + drbdadm,
+	 * that should check it for you already; but if you don't, or someone
+	 * fooled it, we need to double check here) */
+	nbc->md_bdev = inode2->i_bdev;
+	if (bd_claim(nbc->md_bdev, (nbc->dc.meta_dev_idx < 0) ? (void *)mdev
+				: (void *) drbd_m_holder)) {
+		retcode = ERR_BDCLAIM_MD_DISK;
+		goto release_bdev_fail;
+	}
+
+	if ((nbc->backing_bdev == nbc->md_bdev) !=
+	    (nbc->dc.meta_dev_idx == DRBD_MD_INDEX_INTERNAL ||
+	     nbc->dc.meta_dev_idx == DRBD_MD_INDEX_FLEX_INT)) {
+		retcode = ERR_MD_IDX_INVALID;
+		goto release_bdev2_fail;
+	}
+
+	/* RT - for drbd_get_max_capacity() DRBD_MD_INDEX_FLEX_INT */
+	drbd_md_set_sector_offsets(mdev, nbc);
+
+	if (drbd_get_max_capacity(nbc) < nbc->dc.disk_size) {
+		dev_err(DEV, "max capacity %llu smaller than disk size %llu\n",
+			(unsigned long long) drbd_get_max_capacity(nbc),
+			(unsigned long long) nbc->dc.disk_size);
+		retcode = ERR_DISK_TO_SMALL;
+		goto release_bdev2_fail;
+	}
+
+	if (nbc->dc.meta_dev_idx < 0) {
+		max_possible_sectors = DRBD_MAX_SECTORS_FLEX;
+		/* at least one MB, otherwise it does not make sense */
+		min_md_device_sectors = (2<<10);
+	} else {
+		max_possible_sectors = DRBD_MAX_SECTORS;
+		min_md_device_sectors = MD_RESERVED_SECT * (nbc->dc.meta_dev_idx + 1);
+	}
+
+	if (drbd_get_capacity(nbc->md_bdev) < min_md_device_sectors) {
+		retcode = ERR_MD_DISK_TO_SMALL;
+		dev_warn(DEV, "refusing attach: md-device too small, "
+		     "at least %llu sectors needed for this meta-disk type\n",
+		     (unsigned long long) min_md_device_sectors);
+		goto release_bdev2_fail;
+	}
+
+	/* Make sure the new disk is big enough
+	 * (we may currently be R_PRIMARY with no local disk...) */
+	if (drbd_get_max_capacity(nbc) <
+	    drbd_get_capacity(mdev->this_bdev)) {
+		retcode = ERR_DISK_TO_SMALL;
+		goto release_bdev2_fail;
+	}
+
+	nbc->known_size = drbd_get_capacity(nbc->backing_bdev);
+
+	if (nbc->known_size > max_possible_sectors) {
+		dev_warn(DEV, "==> truncating very big lower level device "
+			"to currently maximum possible %llu sectors <==\n",
+			(unsigned long long) max_possible_sectors);
+		if (nbc->dc.meta_dev_idx >= 0)
+			dev_warn(DEV, "==>> using internal or flexible "
+				      "meta data may help <<==\n");
+	}
+
+	drbd_suspend_io(mdev);
+	/* also wait for the last barrier ack. */
+	wait_event(mdev->misc_wait, !atomic_read(&mdev->ap_pending_cnt));
+	/* and for any other previously queued work */
+	drbd_flush_workqueue(mdev);
+
+	retcode = _drbd_request_state(mdev, NS(disk, D_ATTACHING), CS_VERBOSE);
+	drbd_resume_io(mdev);
+	if (retcode < SS_SUCCESS)
+		goto release_bdev2_fail;
+
+	if (!get_ldev_if_state(mdev, D_ATTACHING))
+		goto force_diskless;
+
+	drbd_md_set_sector_offsets(mdev, nbc);
+
+	if (!mdev->bitmap) {
+		if (drbd_bm_init(mdev)) {
+			retcode = ERR_NOMEM;
+			goto force_diskless_dec;
+		}
+	}
+
+	retcode = drbd_md_read(mdev, nbc);
+	if (retcode != NO_ERROR)
+		goto force_diskless_dec;
+
+	if (mdev->state.conn < C_CONNECTED &&
+	    mdev->state.role == R_PRIMARY &&
+	    (mdev->ed_uuid & ~((u64)1)) != (nbc->md.uuid[UI_CURRENT] & ~((u64)1))) {
+		dev_err(DEV, "Can only attach to data with current UUID=%016llX\n",
+		    (unsigned long long)mdev->ed_uuid);
+		retcode = ERR_DATA_NOT_CURRENT;
+		goto force_diskless_dec;
+	}
+
+	/* Since we are diskless, fix the activity log first... */
+	if (drbd_check_al_size(mdev)) {
+		retcode = ERR_NOMEM;
+		goto force_diskless_dec;
+	}
+
+	/* Prevent shrinking of consistent devices ! */
+	if (drbd_md_test_flag(nbc, MDF_CONSISTENT) &&
+	   drbd_new_dev_size(mdev, nbc) < nbc->md.la_size_sect) {
+		dev_warn(DEV, "refusing to truncate a consistent device\n");
+		retcode = ERR_DISK_TO_SMALL;
+		goto force_diskless_dec;
+	}
+
+	if (!drbd_al_read_log(mdev, nbc)) {
+		retcode = ERR_IO_MD_DISK;
+		goto force_diskless_dec;
+	}
+
+	/* allocate a second IO page if logical_block_size != 512 */
+	logical_block_size = bdev_logical_block_size(nbc->md_bdev);
+	if (logical_block_size == 0)
+		logical_block_size = MD_SECTOR_SIZE;
+
+	if (logical_block_size != MD_SECTOR_SIZE) {
+		if (!mdev->md_io_tmpp) {
+			struct page *page = alloc_page(GFP_NOIO);
+			if (!page)
+				goto force_diskless_dec;
+
+			dev_warn(DEV, "Meta data's bdev logical_block_size = %d != %d\n",
+			     logical_block_size, MD_SECTOR_SIZE);
+			dev_warn(DEV, "Workaround engaged (has performance impact).\n");
+
+			mdev->md_io_tmpp = page;
+		}
+	}
+
+	/* Reset the "barriers don't work" bits here, then force meta data to
+	 * be written, to ensure we determine if barriers are supported. */
+	if (nbc->dc.no_md_flush)
+		set_bit(MD_NO_BARRIER, &mdev->flags);
+	else
+		clear_bit(MD_NO_BARRIER, &mdev->flags);
+
+	/* Point of no return reached.
+	 * Devices and memory are no longer released by error cleanup below.
+	 * now mdev takes over responsibility, and the state engine should
+	 * clean it up somewhere.  */
+	D_ASSERT(mdev->ldev == NULL);
+	mdev->ldev = nbc;
+	mdev->resync = resync_lru;
+	nbc = NULL;
+	resync_lru = NULL;
+
+	mdev->write_ordering = WO_bio_barrier;
+	drbd_bump_write_ordering(mdev, WO_bio_barrier);
+
+	if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY))
+		set_bit(CRASHED_PRIMARY, &mdev->flags);
+	else
+		clear_bit(CRASHED_PRIMARY, &mdev->flags);
+
+	if (drbd_md_test_flag(mdev->ldev, MDF_PRIMARY_IND)) {
+		set_bit(CRASHED_PRIMARY, &mdev->flags);
+		cp_discovered = 1;
+	}
+
+	mdev->send_cnt = 0;
+	mdev->recv_cnt = 0;
+	mdev->read_cnt = 0;
+	mdev->writ_cnt = 0;
+
+	drbd_setup_queue_param(mdev, DRBD_MAX_SEGMENT_SIZE);
+
+	/* If I am currently not R_PRIMARY,
+	 * but meta data primary indicator is set,
+	 * I just now recover from a hard crash,
+	 * and have been R_PRIMARY before that crash.
+	 *
+	 * Now, if I had no connection before that crash
+	 * (have been degraded R_PRIMARY), chances are that
+	 * I won't find my peer now either.
+	 *
+	 * In that case, and _only_ in that case,
+	 * we use the degr-wfc-timeout instead of the default,
+	 * so we can automatically recover from a crash of a
+	 * degraded but active "cluster" after a certain timeout.
+	 */
+	clear_bit(USE_DEGR_WFC_T, &mdev->flags);
+	if (mdev->state.role != R_PRIMARY &&
+	     drbd_md_test_flag(mdev->ldev, MDF_PRIMARY_IND) &&
+	    !drbd_md_test_flag(mdev->ldev, MDF_CONNECTED_IND))
+		set_bit(USE_DEGR_WFC_T, &mdev->flags);
+
+	dd = drbd_determin_dev_size(mdev);
+	if (dd == dev_size_error) {
+		retcode = ERR_NOMEM_BITMAP;
+		goto force_diskless_dec;
+	} else if (dd == grew)
+		set_bit(RESYNC_AFTER_NEG, &mdev->flags);
+
+	if (drbd_md_test_flag(mdev->ldev, MDF_FULL_SYNC)) {
+		dev_info(DEV, "Assuming that all blocks are out of sync "
+		     "(aka FullSync)\n");
+		if (drbd_bitmap_io(mdev, &drbd_bmio_set_n_write, "set_n_write from attaching")) {
+			retcode = ERR_IO_MD_DISK;
+			goto force_diskless_dec;
+		}
+	} else {
+		if (drbd_bitmap_io(mdev, &drbd_bm_read, "read from attaching") < 0) {
+			retcode = ERR_IO_MD_DISK;
+			goto force_diskless_dec;
+		}
+	}
+
+	if (cp_discovered) {
+		drbd_al_apply_to_bm(mdev);
+		drbd_al_to_on_disk_bm(mdev);
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+	os = mdev->state;
+	ns.i = os.i;
+	/* If MDF_CONSISTENT is not set go into inconsistent state,
+	   otherwise investigate MDF_WasUpToDate...
+	   If MDF_WAS_UP_TO_DATE is not set go into D_OUTDATED disk state,
+	   otherwise into D_CONSISTENT state.
+	*/
+	if (drbd_md_test_flag(mdev->ldev, MDF_CONSISTENT)) {
+		if (drbd_md_test_flag(mdev->ldev, MDF_WAS_UP_TO_DATE))
+			ns.disk = D_CONSISTENT;
+		else
+			ns.disk = D_OUTDATED;
+	} else {
+		ns.disk = D_INCONSISTENT;
+	}
+
+	if (drbd_md_test_flag(mdev->ldev, MDF_PEER_OUT_DATED))
+		ns.pdsk = D_OUTDATED;
+
+	if ( ns.disk == D_CONSISTENT &&
+	    (ns.pdsk == D_OUTDATED || mdev->ldev->dc.fencing == FP_DONT_CARE))
+		ns.disk = D_UP_TO_DATE;
+
+	/* All tests on MDF_PRIMARY_IND, MDF_CONNECTED_IND,
+	   MDF_CONSISTENT and MDF_WAS_UP_TO_DATE must happen before
+	   this point, because drbd_request_state() modifies these
+	   flags. */
+
+	/* In case we are C_CONNECTED postpone any decision on the new disk
+	   state after the negotiation phase. */
+	if (mdev->state.conn == C_CONNECTED) {
+		mdev->new_state_tmp.i = ns.i;
+		ns.i = os.i;
+		ns.disk = D_NEGOTIATING;
+	}
+
+	rv = _drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
+	ns = mdev->state;
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (rv < SS_SUCCESS)
+		goto force_diskless_dec;
+
+	if (mdev->state.role == R_PRIMARY)
+		mdev->ldev->md.uuid[UI_CURRENT] |=  (u64)1;
+	else
+		mdev->ldev->md.uuid[UI_CURRENT] &= ~(u64)1;
+
+	drbd_md_mark_dirty(mdev);
+	drbd_md_sync(mdev);
+
+	kobject_uevent(&disk_to_dev(mdev->vdisk)->kobj, KOBJ_CHANGE);
+	put_ldev(mdev);
+	reply->ret_code = retcode;
+	drbd_reconfig_done(mdev);
+	return 0;
+
+ force_diskless_dec:
+	put_ldev(mdev);
+ force_diskless:
+	drbd_force_state(mdev, NS(disk, D_DISKLESS));
+	drbd_md_sync(mdev);
+ release_bdev2_fail:
+	if (nbc)
+		bd_release(nbc->md_bdev);
+ release_bdev_fail:
+	if (nbc)
+		bd_release(nbc->backing_bdev);
+ fail:
+	if (nbc) {
+		if (nbc->lo_file)
+			fput(nbc->lo_file);
+		if (nbc->md_file)
+			fput(nbc->md_file);
+		kfree(nbc);
+	}
+	lc_destroy(resync_lru);
+
+	reply->ret_code = retcode;
+	drbd_reconfig_done(mdev);
+	return 0;
+}
+
+static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			  struct drbd_nl_cfg_reply *reply)
+{
+	reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS));
+	return 0;
+}
+
+static int drbd_nl_net_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			    struct drbd_nl_cfg_reply *reply)
+{
+	int i, ns;
+	enum drbd_ret_codes retcode;
+	struct net_conf *new_conf = NULL;
+	struct crypto_hash *tfm = NULL;
+	struct crypto_hash *integrity_w_tfm = NULL;
+	struct crypto_hash *integrity_r_tfm = NULL;
+	struct hlist_head *new_tl_hash = NULL;
+	struct hlist_head *new_ee_hash = NULL;
+	struct drbd_conf *odev;
+	char hmac_name[CRYPTO_MAX_ALG_NAME];
+	void *int_dig_out = NULL;
+	void *int_dig_in = NULL;
+	void *int_dig_vv = NULL;
+	struct sockaddr *new_my_addr, *new_peer_addr, *taken_addr;
+
+	drbd_reconfig_start(mdev);
+
+	if (mdev->state.conn > C_STANDALONE) {
+		retcode = ERR_NET_CONFIGURED;
+		goto fail;
+	}
+
+	/* allocation not in the IO path, cqueue thread context */
+	new_conf = kmalloc(sizeof(struct net_conf), GFP_KERNEL);
+	if (!new_conf) {
+		retcode = ERR_NOMEM;
+		goto fail;
+	}
+
+	memset(new_conf, 0, sizeof(struct net_conf));
+	new_conf->timeout	   = DRBD_TIMEOUT_DEF;
+	new_conf->try_connect_int  = DRBD_CONNECT_INT_DEF;
+	new_conf->ping_int	   = DRBD_PING_INT_DEF;
+	new_conf->max_epoch_size   = DRBD_MAX_EPOCH_SIZE_DEF;
+	new_conf->max_buffers	   = DRBD_MAX_BUFFERS_DEF;
+	new_conf->unplug_watermark = DRBD_UNPLUG_WATERMARK_DEF;
+	new_conf->sndbuf_size	   = DRBD_SNDBUF_SIZE_DEF;
+	new_conf->rcvbuf_size	   = DRBD_RCVBUF_SIZE_DEF;
+	new_conf->ko_count	   = DRBD_KO_COUNT_DEF;
+	new_conf->after_sb_0p	   = DRBD_AFTER_SB_0P_DEF;
+	new_conf->after_sb_1p	   = DRBD_AFTER_SB_1P_DEF;
+	new_conf->after_sb_2p	   = DRBD_AFTER_SB_2P_DEF;
+	new_conf->want_lose	   = 0;
+	new_conf->two_primaries    = 0;
+	new_conf->wire_protocol    = DRBD_PROT_C;
+	new_conf->ping_timeo	   = DRBD_PING_TIMEO_DEF;
+	new_conf->rr_conflict	   = DRBD_RR_CONFLICT_DEF;
+
+	if (!net_conf_from_tags(mdev, nlp->tag_list, new_conf)) {
+		retcode = ERR_MANDATORY_TAG;
+		goto fail;
+	}
+
+	if (new_conf->two_primaries
+	    && (new_conf->wire_protocol != DRBD_PROT_C)) {
+		retcode = ERR_NOT_PROTO_C;
+		goto fail;
+	};
+
+	if (mdev->state.role == R_PRIMARY && new_conf->want_lose) {
+		retcode = ERR_DISCARD;
+		goto fail;
+	}
+
+	retcode = NO_ERROR;
+
+	new_my_addr = (struct sockaddr *)&new_conf->my_addr;
+	new_peer_addr = (struct sockaddr *)&new_conf->peer_addr;
+	for (i = 0; i < minor_count; i++) {
+		odev = minor_to_mdev(i);
+		if (!odev || odev == mdev)
+			continue;
+		if (get_net_conf(odev)) {
+			taken_addr = (struct sockaddr *)&odev->net_conf->my_addr;
+			if (new_conf->my_addr_len == odev->net_conf->my_addr_len &&
+			    !memcmp(new_my_addr, taken_addr, new_conf->my_addr_len))
+				retcode = ERR_LOCAL_ADDR;
+
+			taken_addr = (struct sockaddr *)&odev->net_conf->peer_addr;
+			if (new_conf->peer_addr_len == odev->net_conf->peer_addr_len &&
+			    !memcmp(new_peer_addr, taken_addr, new_conf->peer_addr_len))
+				retcode = ERR_PEER_ADDR;
+
+			put_net_conf(odev);
+			if (retcode != NO_ERROR)
+				goto fail;
+		}
+	}
+
+	if (new_conf->cram_hmac_alg[0] != 0) {
+		snprintf(hmac_name, CRYPTO_MAX_ALG_NAME, "hmac(%s)",
+			new_conf->cram_hmac_alg);
+		tfm = crypto_alloc_hash(hmac_name, 0, CRYPTO_ALG_ASYNC);
+		if (IS_ERR(tfm)) {
+			tfm = NULL;
+			retcode = ERR_AUTH_ALG;
+			goto fail;
+		}
+
+		if (crypto_tfm_alg_type(crypto_hash_tfm(tfm))
+						!= CRYPTO_ALG_TYPE_HASH) {
+			retcode = ERR_AUTH_ALG_ND;
+			goto fail;
+		}
+	}
+
+	if (new_conf->integrity_alg[0]) {
+		integrity_w_tfm = crypto_alloc_hash(new_conf->integrity_alg, 0, CRYPTO_ALG_ASYNC);
+		if (IS_ERR(integrity_w_tfm)) {
+			integrity_w_tfm = NULL;
+			retcode=ERR_INTEGRITY_ALG;
+			goto fail;
+		}
+
+		if (!drbd_crypto_is_hash(crypto_hash_tfm(integrity_w_tfm))) {
+			retcode=ERR_INTEGRITY_ALG_ND;
+			goto fail;
+		}
+
+		integrity_r_tfm = crypto_alloc_hash(new_conf->integrity_alg, 0, CRYPTO_ALG_ASYNC);
+		if (IS_ERR(integrity_r_tfm)) {
+			integrity_r_tfm = NULL;
+			retcode=ERR_INTEGRITY_ALG;
+			goto fail;
+		}
+	}
+
+	ns = new_conf->max_epoch_size/8;
+	if (mdev->tl_hash_s != ns) {
+		new_tl_hash = kzalloc(ns*sizeof(void *), GFP_KERNEL);
+		if (!new_tl_hash) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+	}
+
+	ns = new_conf->max_buffers/8;
+	if (new_conf->two_primaries && (mdev->ee_hash_s != ns)) {
+		new_ee_hash = kzalloc(ns*sizeof(void *), GFP_KERNEL);
+		if (!new_ee_hash) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+	}
+
+	((char *)new_conf->shared_secret)[SHARED_SECRET_MAX-1] = 0;
+
+	if (integrity_w_tfm) {
+		i = crypto_hash_digestsize(integrity_w_tfm);
+		int_dig_out = kmalloc(i, GFP_KERNEL);
+		if (!int_dig_out) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+		int_dig_in = kmalloc(i, GFP_KERNEL);
+		if (!int_dig_in) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+		int_dig_vv = kmalloc(i, GFP_KERNEL);
+		if (!int_dig_vv) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+	}
+
+	if (!mdev->bitmap) {
+		if(drbd_bm_init(mdev)) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+	if (mdev->net_conf != NULL) {
+		retcode = ERR_NET_CONFIGURED;
+		spin_unlock_irq(&mdev->req_lock);
+		goto fail;
+	}
+	mdev->net_conf = new_conf;
+
+	mdev->send_cnt = 0;
+	mdev->recv_cnt = 0;
+
+	if (new_tl_hash) {
+		kfree(mdev->tl_hash);
+		mdev->tl_hash_s = mdev->net_conf->max_epoch_size/8;
+		mdev->tl_hash = new_tl_hash;
+	}
+
+	if (new_ee_hash) {
+		kfree(mdev->ee_hash);
+		mdev->ee_hash_s = mdev->net_conf->max_buffers/8;
+		mdev->ee_hash = new_ee_hash;
+	}
+
+	crypto_free_hash(mdev->cram_hmac_tfm);
+	mdev->cram_hmac_tfm = tfm;
+
+	crypto_free_hash(mdev->integrity_w_tfm);
+	mdev->integrity_w_tfm = integrity_w_tfm;
+
+	crypto_free_hash(mdev->integrity_r_tfm);
+	mdev->integrity_r_tfm = integrity_r_tfm;
+
+	kfree(mdev->int_dig_out);
+	kfree(mdev->int_dig_in);
+	kfree(mdev->int_dig_vv);
+	mdev->int_dig_out=int_dig_out;
+	mdev->int_dig_in=int_dig_in;
+	mdev->int_dig_vv=int_dig_vv;
+	spin_unlock_irq(&mdev->req_lock);
+
+	retcode = _drbd_request_state(mdev, NS(conn, C_UNCONNECTED), CS_VERBOSE);
+
+	kobject_uevent(&disk_to_dev(mdev->vdisk)->kobj, KOBJ_CHANGE);
+	reply->ret_code = retcode;
+	drbd_reconfig_done(mdev);
+	return 0;
+
+fail:
+	kfree(int_dig_out);
+	kfree(int_dig_in);
+	kfree(int_dig_vv);
+	crypto_free_hash(tfm);
+	crypto_free_hash(integrity_w_tfm);
+	crypto_free_hash(integrity_r_tfm);
+	kfree(new_tl_hash);
+	kfree(new_ee_hash);
+	kfree(new_conf);
+
+	reply->ret_code = retcode;
+	drbd_reconfig_done(mdev);
+	return 0;
+}
+
+static int drbd_nl_disconnect(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			      struct drbd_nl_cfg_reply *reply)
+{
+	int retcode;
+
+	retcode = _drbd_request_state(mdev, NS(conn, C_DISCONNECTING), CS_ORDERED);
+
+	if (retcode == SS_NOTHING_TO_DO)
+		goto done;
+	else if (retcode == SS_ALREADY_STANDALONE)
+		goto done;
+	else if (retcode == SS_PRIMARY_NOP) {
+		/* Our statche checking code wants to see the peer outdated. */
+		retcode = drbd_request_state(mdev, NS2(conn, C_DISCONNECTING,
+						      pdsk, D_OUTDATED));
+	} else if (retcode == SS_CW_FAILED_BY_PEER) {
+		/* The peer probably wants to see us outdated. */
+		retcode = _drbd_request_state(mdev, NS2(conn, C_DISCONNECTING,
+							disk, D_OUTDATED),
+					      CS_ORDERED);
+		if (retcode == SS_IS_DISKLESS || retcode == SS_LOWER_THAN_OUTDATED) {
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+			retcode = SS_SUCCESS;
+		}
+	}
+
+	if (retcode < SS_SUCCESS)
+		goto fail;
+
+	if (wait_event_interruptible(mdev->state_wait,
+				     mdev->state.conn != C_DISCONNECTING)) {
+		/* Do not test for mdev->state.conn == C_STANDALONE, since
+		   someone else might connect us in the mean time! */
+		retcode = ERR_INTR;
+		goto fail;
+	}
+
+ done:
+	retcode = NO_ERROR;
+ fail:
+	drbd_md_sync(mdev);
+	reply->ret_code = retcode;
+	return 0;
+}
+
+void resync_after_online_grow(struct drbd_conf *mdev)
+{
+	int iass; /* I am sync source */
+
+	dev_info(DEV, "Resync of new storage after online grow\n");
+	if (mdev->state.role != mdev->state.peer)
+		iass = (mdev->state.role == R_PRIMARY);
+	else
+		iass = test_bit(DISCARD_CONCURRENT, &mdev->flags);
+
+	if (iass)
+		drbd_start_resync(mdev, C_SYNC_SOURCE);
+	else
+		_drbd_request_state(mdev, NS(conn, C_WF_SYNC_UUID), CS_VERBOSE + CS_SERIALIZE);
+}
+
+static int drbd_nl_resize(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			  struct drbd_nl_cfg_reply *reply)
+{
+	struct resize rs;
+	int retcode = NO_ERROR;
+	int ldsc = 0; /* local disk size changed */
+	enum determine_dev_size dd;
+
+	memset(&rs, 0, sizeof(struct resize));
+	if (!resize_from_tags(mdev, nlp->tag_list, &rs)) {
+		retcode = ERR_MANDATORY_TAG;
+		goto fail;
+	}
+
+	if (mdev->state.conn > C_CONNECTED) {
+		retcode = ERR_RESIZE_RESYNC;
+		goto fail;
+	}
+
+	if (mdev->state.role == R_SECONDARY &&
+	    mdev->state.peer == R_SECONDARY) {
+		retcode = ERR_NO_PRIMARY;
+		goto fail;
+	}
+
+	if (!get_ldev(mdev)) {
+		retcode = ERR_NO_DISK;
+		goto fail;
+	}
+
+	if (mdev->ldev->known_size != drbd_get_capacity(mdev->ldev->backing_bdev)) {
+		mdev->ldev->known_size = drbd_get_capacity(mdev->ldev->backing_bdev);
+		ldsc = 1;
+	}
+
+	mdev->ldev->dc.disk_size = (sector_t)rs.resize_size;
+	dd = drbd_determin_dev_size(mdev);
+	drbd_md_sync(mdev);
+	put_ldev(mdev);
+	if (dd == dev_size_error) {
+		retcode = ERR_NOMEM_BITMAP;
+		goto fail;
+	}
+
+	if (mdev->state.conn == C_CONNECTED && (dd != unchanged || ldsc)) {
+		if (dd == grew)
+			set_bit(RESIZE_PENDING, &mdev->flags);
+
+		drbd_send_uuids(mdev);
+		drbd_send_sizes(mdev, 1);
+	}
+
+ fail:
+	reply->ret_code = retcode;
+	return 0;
+}
+
+static int drbd_nl_syncer_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			       struct drbd_nl_cfg_reply *reply)
+{
+	int retcode = NO_ERROR;
+	int err;
+	int ovr; /* online verify running */
+	int rsr; /* re-sync running */
+	struct crypto_hash *verify_tfm = NULL;
+	struct crypto_hash *csums_tfm = NULL;
+	struct syncer_conf sc;
+	cpumask_var_t new_cpu_mask;
+
+	if (!zalloc_cpumask_var(&new_cpu_mask, GFP_KERNEL)) {
+		retcode = ERR_NOMEM;
+		goto fail;
+	}
+
+	if (nlp->flags & DRBD_NL_SET_DEFAULTS) {
+		memset(&sc, 0, sizeof(struct syncer_conf));
+		sc.rate       = DRBD_RATE_DEF;
+		sc.after      = DRBD_AFTER_DEF;
+		sc.al_extents = DRBD_AL_EXTENTS_DEF;
+	} else
+		memcpy(&sc, &mdev->sync_conf, sizeof(struct syncer_conf));
+
+	if (!syncer_conf_from_tags(mdev, nlp->tag_list, &sc)) {
+		retcode = ERR_MANDATORY_TAG;
+		goto fail;
+	}
+
+	/* re-sync running */
+	rsr = (	mdev->state.conn == C_SYNC_SOURCE ||
+		mdev->state.conn == C_SYNC_TARGET ||
+		mdev->state.conn == C_PAUSED_SYNC_S ||
+		mdev->state.conn == C_PAUSED_SYNC_T );
+
+	if (rsr && strcmp(sc.csums_alg, mdev->sync_conf.csums_alg)) {
+		retcode = ERR_CSUMS_RESYNC_RUNNING;
+		goto fail;
+	}
+
+	if (!rsr && sc.csums_alg[0]) {
+		csums_tfm = crypto_alloc_hash(sc.csums_alg, 0, CRYPTO_ALG_ASYNC);
+		if (IS_ERR(csums_tfm)) {
+			csums_tfm = NULL;
+			retcode = ERR_CSUMS_ALG;
+			goto fail;
+		}
+
+		if (!drbd_crypto_is_hash(crypto_hash_tfm(csums_tfm))) {
+			retcode = ERR_CSUMS_ALG_ND;
+			goto fail;
+		}
+	}
+
+	/* online verify running */
+	ovr = (mdev->state.conn == C_VERIFY_S || mdev->state.conn == C_VERIFY_T);
+
+	if (ovr) {
+		if (strcmp(sc.verify_alg, mdev->sync_conf.verify_alg)) {
+			retcode = ERR_VERIFY_RUNNING;
+			goto fail;
+		}
+	}
+
+	if (!ovr && sc.verify_alg[0]) {
+		verify_tfm = crypto_alloc_hash(sc.verify_alg, 0, CRYPTO_ALG_ASYNC);
+		if (IS_ERR(verify_tfm)) {
+			verify_tfm = NULL;
+			retcode = ERR_VERIFY_ALG;
+			goto fail;
+		}
+
+		if (!drbd_crypto_is_hash(crypto_hash_tfm(verify_tfm))) {
+			retcode = ERR_VERIFY_ALG_ND;
+			goto fail;
+		}
+	}
+
+	/* silently ignore cpu mask on UP kernel */
+	if (nr_cpu_ids > 1 && sc.cpu_mask[0] != 0) {
+		err = __bitmap_parse(sc.cpu_mask, 32, 0,
+				cpumask_bits(new_cpu_mask), nr_cpu_ids);
+		if (err) {
+			dev_warn(DEV, "__bitmap_parse() failed with %d\n", err);
+			retcode = ERR_CPU_MASK_PARSE;
+			goto fail;
+		}
+	}
+
+	ERR_IF (sc.rate < 1) sc.rate = 1;
+	ERR_IF (sc.al_extents < 7) sc.al_extents = 127; /* arbitrary minimum */
+#define AL_MAX ((MD_AL_MAX_SIZE-1) * AL_EXTENTS_PT)
+	if (sc.al_extents > AL_MAX) {
+		dev_err(DEV, "sc.al_extents > %d\n", AL_MAX);
+		sc.al_extents = AL_MAX;
+	}
+#undef AL_MAX
+
+	/* most sanity checks done, try to assign the new sync-after
+	 * dependency.  need to hold the global lock in there,
+	 * to avoid a race in the dependency loop check. */
+	retcode = drbd_alter_sa(mdev, sc.after);
+	if (retcode != NO_ERROR)
+		goto fail;
+
+	/* ok, assign the rest of it as well.
+	 * lock against receive_SyncParam() */
+	spin_lock(&mdev->peer_seq_lock);
+	mdev->sync_conf = sc;
+
+	if (!rsr) {
+		crypto_free_hash(mdev->csums_tfm);
+		mdev->csums_tfm = csums_tfm;
+		csums_tfm = NULL;
+	}
+
+	if (!ovr) {
+		crypto_free_hash(mdev->verify_tfm);
+		mdev->verify_tfm = verify_tfm;
+		verify_tfm = NULL;
+	}
+	spin_unlock(&mdev->peer_seq_lock);
+
+	if (get_ldev(mdev)) {
+		wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
+		drbd_al_shrink(mdev);
+		err = drbd_check_al_size(mdev);
+		lc_unlock(mdev->act_log);
+		wake_up(&mdev->al_wait);
+
+		put_ldev(mdev);
+		drbd_md_sync(mdev);
+
+		if (err) {
+			retcode = ERR_NOMEM;
+			goto fail;
+		}
+	}
+
+	if (mdev->state.conn >= C_CONNECTED)
+		drbd_send_sync_param(mdev, &sc);
+
+	if (!cpumask_equal(mdev->cpu_mask, new_cpu_mask)) {
+		cpumask_copy(mdev->cpu_mask, new_cpu_mask);
+		drbd_calc_cpu_mask(mdev);
+		mdev->receiver.reset_cpu_mask = 1;
+		mdev->asender.reset_cpu_mask = 1;
+		mdev->worker.reset_cpu_mask = 1;
+	}
+
+	kobject_uevent(&disk_to_dev(mdev->vdisk)->kobj, KOBJ_CHANGE);
+fail:
+	free_cpumask_var(new_cpu_mask);
+	crypto_free_hash(csums_tfm);
+	crypto_free_hash(verify_tfm);
+	reply->ret_code = retcode;
+	return 0;
+}
+
+static int drbd_nl_invalidate(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			      struct drbd_nl_cfg_reply *reply)
+{
+	int retcode;
+
+	retcode = _drbd_request_state(mdev, NS(conn, C_STARTING_SYNC_T), CS_ORDERED);
+
+	if (retcode < SS_SUCCESS && retcode != SS_NEED_CONNECTION)
+		retcode = drbd_request_state(mdev, NS(conn, C_STARTING_SYNC_T));
+
+	while (retcode == SS_NEED_CONNECTION) {
+		spin_lock_irq(&mdev->req_lock);
+		if (mdev->state.conn < C_CONNECTED)
+			retcode = _drbd_set_state(_NS(mdev, disk, D_INCONSISTENT), CS_VERBOSE, NULL);
+		spin_unlock_irq(&mdev->req_lock);
+
+		if (retcode != SS_NEED_CONNECTION)
+			break;
+
+		retcode = drbd_request_state(mdev, NS(conn, C_STARTING_SYNC_T));
+	}
+
+	reply->ret_code = retcode;
+	return 0;
+}
+
+static int drbd_nl_invalidate_peer(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+				   struct drbd_nl_cfg_reply *reply)
+{
+
+	reply->ret_code = drbd_request_state(mdev, NS(conn, C_STARTING_SYNC_S));
+
+	return 0;
+}
+
+static int drbd_nl_pause_sync(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			      struct drbd_nl_cfg_reply *reply)
+{
+	int retcode = NO_ERROR;
+
+	if (drbd_request_state(mdev, NS(user_isp, 1)) == SS_NOTHING_TO_DO)
+		retcode = ERR_PAUSE_IS_SET;
+
+	reply->ret_code = retcode;
+	return 0;
+}
+
+static int drbd_nl_resume_sync(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			       struct drbd_nl_cfg_reply *reply)
+{
+	int retcode = NO_ERROR;
+
+	if (drbd_request_state(mdev, NS(user_isp, 0)) == SS_NOTHING_TO_DO)
+		retcode = ERR_PAUSE_IS_CLEAR;
+
+	reply->ret_code = retcode;
+	return 0;
+}
+
+static int drbd_nl_suspend_io(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			      struct drbd_nl_cfg_reply *reply)
+{
+	reply->ret_code = drbd_request_state(mdev, NS(susp, 1));
+
+	return 0;
+}
+
+static int drbd_nl_resume_io(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			     struct drbd_nl_cfg_reply *reply)
+{
+	reply->ret_code = drbd_request_state(mdev, NS(susp, 0));
+	return 0;
+}
+
+static int drbd_nl_outdate(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			   struct drbd_nl_cfg_reply *reply)
+{
+	reply->ret_code = drbd_request_state(mdev, NS(disk, D_OUTDATED));
+	return 0;
+}
+
+static int drbd_nl_get_config(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			   struct drbd_nl_cfg_reply *reply)
+{
+	unsigned short *tl;
+
+	tl = reply->tag_list;
+
+	if (get_ldev(mdev)) {
+		tl = disk_conf_to_tags(mdev, &mdev->ldev->dc, tl);
+		put_ldev(mdev);
+	}
+
+	if (get_net_conf(mdev)) {
+		tl = net_conf_to_tags(mdev, mdev->net_conf, tl);
+		put_net_conf(mdev);
+	}
+	tl = syncer_conf_to_tags(mdev, &mdev->sync_conf, tl);
+
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	return (int)((char *)tl - (char *)reply->tag_list);
+}
+
+static int drbd_nl_get_state(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			     struct drbd_nl_cfg_reply *reply)
+{
+	unsigned short *tl = reply->tag_list;
+	union drbd_state s = mdev->state;
+	unsigned long rs_left;
+	unsigned int res;
+
+	tl = get_state_to_tags(mdev, (struct get_state *)&s, tl);
+
+	/* no local ref, no bitmap, no syncer progress. */
+	if (s.conn >= C_SYNC_SOURCE && s.conn <= C_PAUSED_SYNC_T) {
+		if (get_ldev(mdev)) {
+			drbd_get_syncer_progress(mdev, &rs_left, &res);
+			tl = tl_add_int(tl, T_sync_progress, &res);
+			put_ldev(mdev);
+		}
+	}
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	return (int)((char *)tl - (char *)reply->tag_list);
+}
+
+static int drbd_nl_get_uuids(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			     struct drbd_nl_cfg_reply *reply)
+{
+	unsigned short *tl;
+
+	tl = reply->tag_list;
+
+	if (get_ldev(mdev)) {
+		tl = tl_add_blob(tl, T_uuids, mdev->ldev->md.uuid, UI_SIZE*sizeof(u64));
+		tl = tl_add_int(tl, T_uuids_flags, &mdev->ldev->md.flags);
+		put_ldev(mdev);
+	}
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	return (int)((char *)tl - (char *)reply->tag_list);
+}
+
+/**
+ * drbd_nl_get_timeout_flag() - Used by drbdsetup to find out which timeout value to use
+ * @mdev:	DRBD device.
+ * @nlp:	Netlink/connector packet from drbdsetup
+ * @reply:	Reply packet for drbdsetup
+ */
+static int drbd_nl_get_timeout_flag(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+				    struct drbd_nl_cfg_reply *reply)
+{
+	unsigned short *tl;
+	char rv;
+
+	tl = reply->tag_list;
+
+	rv = mdev->state.pdsk == D_OUTDATED        ? UT_PEER_OUTDATED :
+	  test_bit(USE_DEGR_WFC_T, &mdev->flags) ? UT_DEGRADED : UT_DEFAULT;
+
+	tl = tl_add_blob(tl, T_use_degraded, &rv, sizeof(rv));
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	return (int)((char *)tl - (char *)reply->tag_list);
+}
+
+static int drbd_nl_start_ov(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+				    struct drbd_nl_cfg_reply *reply)
+{
+	/* default to resume from last known position, if possible */
+	struct start_ov args =
+		{ .start_sector = mdev->ov_start_sector };
+
+	if (!start_ov_from_tags(mdev, nlp->tag_list, &args)) {
+		reply->ret_code = ERR_MANDATORY_TAG;
+		return 0;
+	}
+	/* w_make_ov_request expects position to be aligned */
+	mdev->ov_start_sector = args.start_sector & ~BM_SECT_PER_BIT;
+	reply->ret_code = drbd_request_state(mdev,NS(conn,C_VERIFY_S));
+	return 0;
+}
+
+
+static int drbd_nl_new_c_uuid(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
+			      struct drbd_nl_cfg_reply *reply)
+{
+	int retcode = NO_ERROR;
+	int skip_initial_sync = 0;
+	int err;
+
+	struct new_c_uuid args;
+
+	memset(&args, 0, sizeof(struct new_c_uuid));
+	if (!new_c_uuid_from_tags(mdev, nlp->tag_list, &args)) {
+		reply->ret_code = ERR_MANDATORY_TAG;
+		return 0;
+	}
+
+	mutex_lock(&mdev->state_mutex); /* Protects us against serialized state changes. */
+
+	if (!get_ldev(mdev)) {
+		retcode = ERR_NO_DISK;
+		goto out;
+	}
+
+	/* this is "skip initial sync", assume to be clean */
+	if (mdev->state.conn == C_CONNECTED && mdev->agreed_pro_version >= 90 &&
+	    mdev->ldev->md.uuid[UI_CURRENT] == UUID_JUST_CREATED && args.clear_bm) {
+		dev_info(DEV, "Preparing to skip initial sync\n");
+		skip_initial_sync = 1;
+	} else if (mdev->state.conn != C_STANDALONE) {
+		retcode = ERR_CONNECTED;
+		goto out_dec;
+	}
+
+	drbd_uuid_set(mdev, UI_BITMAP, 0); /* Rotate UI_BITMAP to History 1, etc... */
+	drbd_uuid_new_current(mdev); /* New current, previous to UI_BITMAP */
+
+	if (args.clear_bm) {
+		err = drbd_bitmap_io(mdev, &drbd_bmio_clear_n_write, "clear_n_write from new_c_uuid");
+		if (err) {
+			dev_err(DEV, "Writing bitmap failed with %d\n",err);
+			retcode = ERR_IO_MD_DISK;
+		}
+		if (skip_initial_sync) {
+			drbd_send_uuids_skip_initial_sync(mdev);
+			_drbd_uuid_set(mdev, UI_BITMAP, 0);
+			spin_lock_irq(&mdev->req_lock);
+			_drbd_set_state(_NS2(mdev, disk, D_UP_TO_DATE, pdsk, D_UP_TO_DATE),
+					CS_VERBOSE, NULL);
+			spin_unlock_irq(&mdev->req_lock);
+		}
+	}
+
+	drbd_md_sync(mdev);
+out_dec:
+	put_ldev(mdev);
+out:
+	mutex_unlock(&mdev->state_mutex);
+
+	reply->ret_code = retcode;
+	return 0;
+}
+
+static struct drbd_conf *ensure_mdev(struct drbd_nl_cfg_req *nlp)
+{
+	struct drbd_conf *mdev;
+
+	if (nlp->drbd_minor >= minor_count)
+		return NULL;
+
+	mdev = minor_to_mdev(nlp->drbd_minor);
+
+	if (!mdev && (nlp->flags & DRBD_NL_CREATE_DEVICE)) {
+		struct gendisk *disk = NULL;
+		mdev = drbd_new_device(nlp->drbd_minor);
+
+		spin_lock_irq(&drbd_pp_lock);
+		if (minor_table[nlp->drbd_minor] == NULL) {
+			minor_table[nlp->drbd_minor] = mdev;
+			disk = mdev->vdisk;
+			mdev = NULL;
+		} /* else: we lost the race */
+		spin_unlock_irq(&drbd_pp_lock);
+
+		if (disk) /* we won the race above */
+			/* in case we ever add a drbd_delete_device(),
+			 * don't forget the del_gendisk! */
+			add_disk(disk);
+		else /* we lost the race above */
+			drbd_free_mdev(mdev);
+
+		mdev = minor_to_mdev(nlp->drbd_minor);
+	}
+
+	return mdev;
+}
+
+struct cn_handler_struct {
+	int (*function)(struct drbd_conf *,
+			 struct drbd_nl_cfg_req *,
+			 struct drbd_nl_cfg_reply *);
+	int reply_body_size;
+};
+
+static struct cn_handler_struct cnd_table[] = {
+	[ P_primary ]		= { &drbd_nl_primary,		0 },
+	[ P_secondary ]		= { &drbd_nl_secondary,		0 },
+	[ P_disk_conf ]		= { &drbd_nl_disk_conf,		0 },
+	[ P_detach ]		= { &drbd_nl_detach,		0 },
+	[ P_net_conf ]		= { &drbd_nl_net_conf,		0 },
+	[ P_disconnect ]	= { &drbd_nl_disconnect,	0 },
+	[ P_resize ]		= { &drbd_nl_resize,		0 },
+	[ P_syncer_conf ]	= { &drbd_nl_syncer_conf,	0 },
+	[ P_invalidate ]	= { &drbd_nl_invalidate,	0 },
+	[ P_invalidate_peer ]	= { &drbd_nl_invalidate_peer,	0 },
+	[ P_pause_sync ]	= { &drbd_nl_pause_sync,	0 },
+	[ P_resume_sync ]	= { &drbd_nl_resume_sync,	0 },
+	[ P_suspend_io ]	= { &drbd_nl_suspend_io,	0 },
+	[ P_resume_io ]		= { &drbd_nl_resume_io,		0 },
+	[ P_outdate ]		= { &drbd_nl_outdate,		0 },
+	[ P_get_config ]	= { &drbd_nl_get_config,
+				    sizeof(struct syncer_conf_tag_len_struct) +
+				    sizeof(struct disk_conf_tag_len_struct) +
+				    sizeof(struct net_conf_tag_len_struct) },
+	[ P_get_state ]		= { &drbd_nl_get_state,
+				    sizeof(struct get_state_tag_len_struct) +
+				    sizeof(struct sync_progress_tag_len_struct)	},
+	[ P_get_uuids ]		= { &drbd_nl_get_uuids,
+				    sizeof(struct get_uuids_tag_len_struct) },
+	[ P_get_timeout_flag ]	= { &drbd_nl_get_timeout_flag,
+				    sizeof(struct get_timeout_flag_tag_len_struct)},
+	[ P_start_ov ]		= { &drbd_nl_start_ov,		0 },
+	[ P_new_c_uuid ]	= { &drbd_nl_new_c_uuid,	0 },
+};
+
+static void drbd_connector_callback(struct cn_msg *req, struct netlink_skb_parms *nsp)
+{
+	struct drbd_nl_cfg_req *nlp = (struct drbd_nl_cfg_req *)req->data;
+	struct cn_handler_struct *cm;
+	struct cn_msg *cn_reply;
+	struct drbd_nl_cfg_reply *reply;
+	struct drbd_conf *mdev;
+	int retcode, rr;
+	int reply_size = sizeof(struct cn_msg)
+		+ sizeof(struct drbd_nl_cfg_reply)
+		+ sizeof(short int);
+
+	if (!try_module_get(THIS_MODULE)) {
+		printk(KERN_ERR "drbd: try_module_get() failed!\n");
+		return;
+	}
+
+	if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN)) {
+		retcode = ERR_PERM;
+		goto fail;
+	}
+
+	mdev = ensure_mdev(nlp);
+	if (!mdev) {
+		retcode = ERR_MINOR_INVALID;
+		goto fail;
+	}
+
+	if (nlp->packet_type >= P_nl_after_last_packet) {
+		retcode = ERR_PACKET_NR;
+		goto fail;
+	}
+
+	cm = cnd_table + nlp->packet_type;
+
+	/* This may happen if packet number is 0: */
+	if (cm->function == NULL) {
+		retcode = ERR_PACKET_NR;
+		goto fail;
+	}
+
+	reply_size += cm->reply_body_size;
+
+	/* allocation not in the IO path, cqueue thread context */
+	cn_reply = kmalloc(reply_size, GFP_KERNEL);
+	if (!cn_reply) {
+		retcode = ERR_NOMEM;
+		goto fail;
+	}
+	reply = (struct drbd_nl_cfg_reply *) cn_reply->data;
+
+	reply->packet_type =
+		cm->reply_body_size ? nlp->packet_type : P_nl_after_last_packet;
+	reply->minor = nlp->drbd_minor;
+	reply->ret_code = NO_ERROR; /* Might by modified by cm->function. */
+	/* reply->tag_list; might be modified by cm->function. */
+
+	rr = cm->function(mdev, nlp, reply);
+
+	cn_reply->id = req->id;
+	cn_reply->seq = req->seq;
+	cn_reply->ack = req->ack  + 1;
+	cn_reply->len = sizeof(struct drbd_nl_cfg_reply) + rr;
+	cn_reply->flags = 0;
+
+	rr = cn_netlink_send(cn_reply, CN_IDX_DRBD, GFP_KERNEL);
+	if (rr && rr != -ESRCH)
+		printk(KERN_INFO "drbd: cn_netlink_send()=%d\n", rr);
+
+	kfree(cn_reply);
+	module_put(THIS_MODULE);
+	return;
+ fail:
+	drbd_nl_send_reply(req, retcode);
+	module_put(THIS_MODULE);
+}
+
+static atomic_t drbd_nl_seq = ATOMIC_INIT(2); /* two. */
+
+static unsigned short *
+__tl_add_blob(unsigned short *tl, enum drbd_tags tag, const void *data,
+	unsigned short len, int nul_terminated)
+{
+	unsigned short l = tag_descriptions[tag_number(tag)].max_len;
+	len = (len < l) ? len :  l;
+	put_unaligned(tag, tl++);
+	put_unaligned(len, tl++);
+	memcpy(tl, data, len);
+	tl = (unsigned short*)((char*)tl + len);
+	if (nul_terminated)
+		*((char*)tl - 1) = 0;
+	return tl;
+}
+
+static unsigned short *
+tl_add_blob(unsigned short *tl, enum drbd_tags tag, const void *data, int len)
+{
+	return __tl_add_blob(tl, tag, data, len, 0);
+}
+
+static unsigned short *
+tl_add_str(unsigned short *tl, enum drbd_tags tag, const char *str)
+{
+	return __tl_add_blob(tl, tag, str, strlen(str)+1, 0);
+}
+
+static unsigned short *
+tl_add_int(unsigned short *tl, enum drbd_tags tag, const void *val)
+{
+	put_unaligned(tag, tl++);
+	switch(tag_type(tag)) {
+	case TT_INTEGER:
+		put_unaligned(sizeof(int), tl++);
+		put_unaligned(*(int *)val, (int *)tl);
+		tl = (unsigned short*)((char*)tl+sizeof(int));
+		break;
+	case TT_INT64:
+		put_unaligned(sizeof(u64), tl++);
+		put_unaligned(*(u64 *)val, (u64 *)tl);
+		tl = (unsigned short*)((char*)tl+sizeof(u64));
+		break;
+	default:
+		/* someone did something stupid. */
+		;
+	}
+	return tl;
+}
+
+void drbd_bcast_state(struct drbd_conf *mdev, union drbd_state state)
+{
+	char buffer[sizeof(struct cn_msg)+
+		    sizeof(struct drbd_nl_cfg_reply)+
+		    sizeof(struct get_state_tag_len_struct)+
+		    sizeof(short int)];
+	struct cn_msg *cn_reply = (struct cn_msg *) buffer;
+	struct drbd_nl_cfg_reply *reply =
+		(struct drbd_nl_cfg_reply *)cn_reply->data;
+	unsigned short *tl = reply->tag_list;
+
+	/* dev_warn(DEV, "drbd_bcast_state() got called\n"); */
+
+	tl = get_state_to_tags(mdev, (struct get_state *)&state, tl);
+
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	cn_reply->id.idx = CN_IDX_DRBD;
+	cn_reply->id.val = CN_VAL_DRBD;
+
+	cn_reply->seq = atomic_add_return(1, &drbd_nl_seq);
+	cn_reply->ack = 0; /* not used here. */
+	cn_reply->len = sizeof(struct drbd_nl_cfg_reply) +
+		(int)((char *)tl - (char *)reply->tag_list);
+	cn_reply->flags = 0;
+
+	reply->packet_type = P_get_state;
+	reply->minor = mdev_to_minor(mdev);
+	reply->ret_code = NO_ERROR;
+
+	cn_netlink_send(cn_reply, CN_IDX_DRBD, GFP_NOIO);
+}
+
+void drbd_bcast_ev_helper(struct drbd_conf *mdev, char *helper_name)
+{
+	char buffer[sizeof(struct cn_msg)+
+		    sizeof(struct drbd_nl_cfg_reply)+
+		    sizeof(struct call_helper_tag_len_struct)+
+		    sizeof(short int)];
+	struct cn_msg *cn_reply = (struct cn_msg *) buffer;
+	struct drbd_nl_cfg_reply *reply =
+		(struct drbd_nl_cfg_reply *)cn_reply->data;
+	unsigned short *tl = reply->tag_list;
+
+	/* dev_warn(DEV, "drbd_bcast_state() got called\n"); */
+
+	tl = tl_add_str(tl, T_helper, helper_name);
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	cn_reply->id.idx = CN_IDX_DRBD;
+	cn_reply->id.val = CN_VAL_DRBD;
+
+	cn_reply->seq = atomic_add_return(1, &drbd_nl_seq);
+	cn_reply->ack = 0; /* not used here. */
+	cn_reply->len = sizeof(struct drbd_nl_cfg_reply) +
+		(int)((char *)tl - (char *)reply->tag_list);
+	cn_reply->flags = 0;
+
+	reply->packet_type = P_call_helper;
+	reply->minor = mdev_to_minor(mdev);
+	reply->ret_code = NO_ERROR;
+
+	cn_netlink_send(cn_reply, CN_IDX_DRBD, GFP_NOIO);
+}
+
+void drbd_bcast_ee(struct drbd_conf *mdev,
+		const char *reason, const int dgs,
+		const char* seen_hash, const char* calc_hash,
+		const struct drbd_epoch_entry* e)
+{
+	struct cn_msg *cn_reply;
+	struct drbd_nl_cfg_reply *reply;
+	struct bio_vec *bvec;
+	unsigned short *tl;
+	int i;
+
+	if (!e)
+		return;
+	if (!reason || !reason[0])
+		return;
+
+	/* apparently we have to memcpy twice, first to prepare the data for the
+	 * struct cn_msg, then within cn_netlink_send from the cn_msg to the
+	 * netlink skb. */
+	/* receiver thread context, which is not in the writeout path (of this node),
+	 * but may be in the writeout path of the _other_ node.
+	 * GFP_NOIO to avoid potential "distributed deadlock". */
+	cn_reply = kmalloc(
+		sizeof(struct cn_msg)+
+		sizeof(struct drbd_nl_cfg_reply)+
+		sizeof(struct dump_ee_tag_len_struct)+
+		sizeof(short int),
+		GFP_NOIO);
+
+	if (!cn_reply) {
+		dev_err(DEV, "could not kmalloc buffer for drbd_bcast_ee, sector %llu, size %u\n",
+				(unsigned long long)e->sector, e->size);
+		return;
+	}
+
+	reply = (struct drbd_nl_cfg_reply*)cn_reply->data;
+	tl = reply->tag_list;
+
+	tl = tl_add_str(tl, T_dump_ee_reason, reason);
+	tl = tl_add_blob(tl, T_seen_digest, seen_hash, dgs);
+	tl = tl_add_blob(tl, T_calc_digest, calc_hash, dgs);
+	tl = tl_add_int(tl, T_ee_sector, &e->sector);
+	tl = tl_add_int(tl, T_ee_block_id, &e->block_id);
+
+	put_unaligned(T_ee_data, tl++);
+	put_unaligned(e->size, tl++);
+
+	__bio_for_each_segment(bvec, e->private_bio, i, 0) {
+		void *d = kmap(bvec->bv_page);
+		memcpy(tl, d + bvec->bv_offset, bvec->bv_len);
+		kunmap(bvec->bv_page);
+		tl=(unsigned short*)((char*)tl + bvec->bv_len);
+	}
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	cn_reply->id.idx = CN_IDX_DRBD;
+	cn_reply->id.val = CN_VAL_DRBD;
+
+	cn_reply->seq = atomic_add_return(1,&drbd_nl_seq);
+	cn_reply->ack = 0; // not used here.
+	cn_reply->len = sizeof(struct drbd_nl_cfg_reply) +
+		(int)((char*)tl - (char*)reply->tag_list);
+	cn_reply->flags = 0;
+
+	reply->packet_type = P_dump_ee;
+	reply->minor = mdev_to_minor(mdev);
+	reply->ret_code = NO_ERROR;
+
+	cn_netlink_send(cn_reply, CN_IDX_DRBD, GFP_NOIO);
+	kfree(cn_reply);
+}
+
+void drbd_bcast_sync_progress(struct drbd_conf *mdev)
+{
+	char buffer[sizeof(struct cn_msg)+
+		    sizeof(struct drbd_nl_cfg_reply)+
+		    sizeof(struct sync_progress_tag_len_struct)+
+		    sizeof(short int)];
+	struct cn_msg *cn_reply = (struct cn_msg *) buffer;
+	struct drbd_nl_cfg_reply *reply =
+		(struct drbd_nl_cfg_reply *)cn_reply->data;
+	unsigned short *tl = reply->tag_list;
+	unsigned long rs_left;
+	unsigned int res;
+
+	/* no local ref, no bitmap, no syncer progress, no broadcast. */
+	if (!get_ldev(mdev))
+		return;
+	drbd_get_syncer_progress(mdev, &rs_left, &res);
+	put_ldev(mdev);
+
+	tl = tl_add_int(tl, T_sync_progress, &res);
+	put_unaligned(TT_END, tl++); /* Close the tag list */
+
+	cn_reply->id.idx = CN_IDX_DRBD;
+	cn_reply->id.val = CN_VAL_DRBD;
+
+	cn_reply->seq = atomic_add_return(1, &drbd_nl_seq);
+	cn_reply->ack = 0; /* not used here. */
+	cn_reply->len = sizeof(struct drbd_nl_cfg_reply) +
+		(int)((char *)tl - (char *)reply->tag_list);
+	cn_reply->flags = 0;
+
+	reply->packet_type = P_sync_progress;
+	reply->minor = mdev_to_minor(mdev);
+	reply->ret_code = NO_ERROR;
+
+	cn_netlink_send(cn_reply, CN_IDX_DRBD, GFP_NOIO);
+}
+
+int __init drbd_nl_init(void)
+{
+	static struct cb_id cn_id_drbd;
+	int err, try=10;
+
+	cn_id_drbd.val = CN_VAL_DRBD;
+	do {
+		cn_id_drbd.idx = cn_idx;
+		err = cn_add_callback(&cn_id_drbd, "cn_drbd", &drbd_connector_callback);
+		if (!err)
+			break;
+		cn_idx = (cn_idx + CN_IDX_STEP);
+	} while (try--);
+
+	if (err) {
+		printk(KERN_ERR "drbd: cn_drbd failed to register\n");
+		return err;
+	}
+
+	return 0;
+}
+
+void drbd_nl_cleanup(void)
+{
+	static struct cb_id cn_id_drbd;
+
+	cn_id_drbd.idx = cn_idx;
+	cn_id_drbd.val = CN_VAL_DRBD;
+
+	cn_del_callback(&cn_id_drbd);
+}
+
+void drbd_nl_send_reply(struct cn_msg *req, int ret_code)
+{
+	char buffer[sizeof(struct cn_msg)+sizeof(struct drbd_nl_cfg_reply)];
+	struct cn_msg *cn_reply = (struct cn_msg *) buffer;
+	struct drbd_nl_cfg_reply *reply =
+		(struct drbd_nl_cfg_reply *)cn_reply->data;
+	int rr;
+
+	cn_reply->id = req->id;
+
+	cn_reply->seq = req->seq;
+	cn_reply->ack = req->ack  + 1;
+	cn_reply->len = sizeof(struct drbd_nl_cfg_reply);
+	cn_reply->flags = 0;
+
+	reply->minor = ((struct drbd_nl_cfg_req *)req->data)->drbd_minor;
+	reply->ret_code = ret_code;
+
+	rr = cn_netlink_send(cn_reply, CN_IDX_DRBD, GFP_NOIO);
+	if (rr && rr != -ESRCH)
+		printk(KERN_INFO "drbd: cn_netlink_send()=%d\n", rr);
+}
+
diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
new file mode 100644
index 0000000..bdd0b49
--- /dev/null
+++ b/drivers/block/drbd/drbd_proc.c
@@ -0,0 +1,265 @@
+/*
+   drbd_proc.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/module.h>
+
+#include <asm/uaccess.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/drbd.h>
+#include "drbd_int.h"
+
+static int drbd_proc_open(struct inode *inode, struct file *file);
+
+
+struct proc_dir_entry *drbd_proc;
+struct file_operations drbd_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= drbd_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+
+/*lge
+ * progress bars shamelessly adapted from driver/md/md.c
+ * output looks like
+ *	[=====>..............] 33.5% (23456/123456)
+ *	finish: 2:20:20 speed: 6,345 (6,456) K/sec
+ */
+static void drbd_syncer_progress(struct drbd_conf *mdev, struct seq_file *seq)
+{
+	unsigned long db, dt, dbdt, rt, rs_left;
+	unsigned int res;
+	int i, x, y;
+
+	drbd_get_syncer_progress(mdev, &rs_left, &res);
+
+	x = res/50;
+	y = 20-x;
+	seq_printf(seq, "\t[");
+	for (i = 1; i < x; i++)
+		seq_printf(seq, "=");
+	seq_printf(seq, ">");
+	for (i = 0; i < y; i++)
+		seq_printf(seq, ".");
+	seq_printf(seq, "] ");
+
+	seq_printf(seq, "sync'ed:%3u.%u%% ", res / 10, res % 10);
+	/* if more than 1 GB display in MB */
+	if (mdev->rs_total > 0x100000L)
+		seq_printf(seq, "(%lu/%lu)M\n\t",
+			    (unsigned long) Bit2KB(rs_left >> 10),
+			    (unsigned long) Bit2KB(mdev->rs_total >> 10));
+	else
+		seq_printf(seq, "(%lu/%lu)K\n\t",
+			    (unsigned long) Bit2KB(rs_left),
+			    (unsigned long) Bit2KB(mdev->rs_total));
+
+	/* see drivers/md/md.c
+	 * We do not want to overflow, so the order of operands and
+	 * the * 100 / 100 trick are important. We do a +1 to be
+	 * safe against division by zero. We only estimate anyway.
+	 *
+	 * dt: time from mark until now
+	 * db: blocks written from mark until now
+	 * rt: remaining time
+	 */
+	dt = (jiffies - mdev->rs_mark_time) / HZ;
+
+	if (dt > 20) {
+		/* if we made no update to rs_mark_time for too long,
+		 * we are stalled. show that. */
+		seq_printf(seq, "stalled\n");
+		return;
+	}
+
+	if (!dt)
+		dt++;
+	db = mdev->rs_mark_left - rs_left;
+	rt = (dt * (rs_left / (db/100+1)))/100; /* seconds */
+
+	seq_printf(seq, "finish: %lu:%02lu:%02lu",
+		rt / 3600, (rt % 3600) / 60, rt % 60);
+
+	/* current speed average over (SYNC_MARKS * SYNC_MARK_STEP) jiffies */
+	dbdt = Bit2KB(db/dt);
+	if (dbdt > 1000)
+		seq_printf(seq, " speed: %ld,%03ld",
+			dbdt/1000, dbdt % 1000);
+	else
+		seq_printf(seq, " speed: %ld", dbdt);
+
+	/* mean speed since syncer started
+	 * we do account for PausedSync periods */
+	dt = (jiffies - mdev->rs_start - mdev->rs_paused) / HZ;
+	if (dt <= 0)
+		dt = 1;
+	db = mdev->rs_total - rs_left;
+	dbdt = Bit2KB(db/dt);
+	if (dbdt > 1000)
+		seq_printf(seq, " (%ld,%03ld)",
+			dbdt/1000, dbdt % 1000);
+	else
+		seq_printf(seq, " (%ld)", dbdt);
+
+	seq_printf(seq, " K/sec\n");
+}
+
+static void resync_dump_detail(struct seq_file *seq, struct lc_element *e)
+{
+	struct bm_extent *bme = lc_entry(e, struct bm_extent, lce);
+
+	seq_printf(seq, "%5d %s %s\n", bme->rs_left,
+		   bme->flags & BME_NO_WRITES ? "NO_WRITES" : "---------",
+		   bme->flags & BME_LOCKED ? "LOCKED" : "------"
+		   );
+}
+
+static int drbd_seq_show(struct seq_file *seq, void *v)
+{
+	int i, hole = 0;
+	const char *sn;
+	struct drbd_conf *mdev;
+
+	static char write_ordering_chars[] = {
+		[WO_none] = 'n',
+		[WO_drain_io] = 'd',
+		[WO_bdev_flush] = 'f',
+		[WO_bio_barrier] = 'b',
+	};
+
+	seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
+		   API_VERSION, PRO_VERSION_MIN, PRO_VERSION_MAX, drbd_buildtag());
+
+	/*
+	  cs .. connection state
+	  ro .. node role (local/remote)
+	  ds .. disk state (local/remote)
+	     protocol
+	     various flags
+	  ns .. network send
+	  nr .. network receive
+	  dw .. disk write
+	  dr .. disk read
+	  al .. activity log write count
+	  bm .. bitmap update write count
+	  pe .. pending (waiting for ack or data reply)
+	  ua .. unack'd (still need to send ack or data reply)
+	  ap .. application requests accepted, but not yet completed
+	  ep .. number of epochs currently "on the fly", P_BARRIER_ACK pending
+	  wo .. write ordering mode currently in use
+	 oos .. known out-of-sync kB
+	*/
+
+	for (i = 0; i < minor_count; i++) {
+		mdev = minor_to_mdev(i);
+		if (!mdev) {
+			hole = 1;
+			continue;
+		}
+		if (hole) {
+			hole = 0;
+			seq_printf(seq, "\n");
+		}
+
+		sn = drbd_conn_str(mdev->state.conn);
+
+		if (mdev->state.conn == C_STANDALONE &&
+		    mdev->state.disk == D_DISKLESS &&
+		    mdev->state.role == R_SECONDARY) {
+			seq_printf(seq, "%2d: cs:Unconfigured\n", i);
+		} else {
+			seq_printf(seq,
+			   "%2d: cs:%s ro:%s/%s ds:%s/%s %c %c%c%c%c%c\n"
+			   "    ns:%u nr:%u dw:%u dr:%u al:%u bm:%u "
+			   "lo:%d pe:%d ua:%d ap:%d ep:%d wo:%c",
+			   i, sn,
+			   drbd_role_str(mdev->state.role),
+			   drbd_role_str(mdev->state.peer),
+			   drbd_disk_str(mdev->state.disk),
+			   drbd_disk_str(mdev->state.pdsk),
+			   (mdev->net_conf == NULL ? ' ' :
+			    (mdev->net_conf->wire_protocol - DRBD_PROT_A+'A')),
+			   mdev->state.susp ? 's' : 'r',
+			   mdev->state.aftr_isp ? 'a' : '-',
+			   mdev->state.peer_isp ? 'p' : '-',
+			   mdev->state.user_isp ? 'u' : '-',
+			   mdev->congestion_reason ?: '-',
+			   mdev->send_cnt/2,
+			   mdev->recv_cnt/2,
+			   mdev->writ_cnt/2,
+			   mdev->read_cnt/2,
+			   mdev->al_writ_cnt,
+			   mdev->bm_writ_cnt,
+			   atomic_read(&mdev->local_cnt),
+			   atomic_read(&mdev->ap_pending_cnt) +
+			   atomic_read(&mdev->rs_pending_cnt),
+			   atomic_read(&mdev->unacked_cnt),
+			   atomic_read(&mdev->ap_bio_cnt),
+			   mdev->epochs,
+			   write_ordering_chars[mdev->write_ordering]
+			);
+			seq_printf(seq, " oos:%lu\n",
+				   Bit2KB(drbd_bm_total_weight(mdev)));
+		}
+		if (mdev->state.conn == C_SYNC_SOURCE ||
+		    mdev->state.conn == C_SYNC_TARGET)
+			drbd_syncer_progress(mdev, seq);
+
+		if (mdev->state.conn == C_VERIFY_S || mdev->state.conn == C_VERIFY_T)
+			seq_printf(seq, "\t%3d%%      %lu/%lu\n",
+				   (int)((mdev->rs_total-mdev->ov_left) /
+					 (mdev->rs_total/100+1)),
+				   mdev->rs_total - mdev->ov_left,
+				   mdev->rs_total);
+
+		if (proc_details >= 1 && get_ldev_if_state(mdev, D_FAILED)) {
+			lc_seq_printf_stats(seq, mdev->resync);
+			lc_seq_printf_stats(seq, mdev->act_log);
+			put_ldev(mdev);
+		}
+
+		if (proc_details >= 2) {
+			if (mdev->resync) {
+				lc_seq_dump_details(seq, mdev->resync, "rs_left",
+					resync_dump_detail);
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int drbd_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, drbd_seq_show, PDE(inode)->data);
+}
+
+/* PROC FS stuff end */
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
new file mode 100644
index 0000000..c548f24
--- /dev/null
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -0,0 +1,4426 @@
+/*
+   drbd_receiver.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/module.h>
+
+#include <asm/uaccess.h>
+#include <net/sock.h>
+
+#include <linux/version.h>
+#include <linux/drbd.h>
+#include <linux/fs.h>
+#include <linux/file.h>
+#include <linux/in.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
+#include <linux/mm_inline.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/pkt_sched.h>
+#define __KERNEL_SYSCALLS__
+#include <linux/unistd.h>
+#include <linux/vmalloc.h>
+#include <linux/random.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/scatterlist.h>
+#include "drbd_int.h"
+#include "drbd_req.h"
+
+#include "drbd_vli.h"
+
+struct flush_work {
+	struct drbd_work w;
+	struct drbd_epoch *epoch;
+};
+
+enum finish_epoch {
+	FE_STILL_LIVE,
+	FE_DESTROYED,
+	FE_RECYCLED,
+};
+
+static int drbd_do_handshake(struct drbd_conf *mdev);
+static int drbd_do_auth(struct drbd_conf *mdev);
+
+static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event);
+static int e_end_block(struct drbd_conf *, struct drbd_work *, int);
+
+static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
+{
+	struct drbd_epoch *prev;
+	spin_lock(&mdev->epoch_lock);
+	prev = list_entry(epoch->list.prev, struct drbd_epoch, list);
+	if (prev == epoch || prev == mdev->current_epoch)
+		prev = NULL;
+	spin_unlock(&mdev->epoch_lock);
+	return prev;
+}
+
+#define GFP_TRY	(__GFP_HIGHMEM | __GFP_NOWARN)
+
+static struct page *drbd_pp_first_page_or_try_alloc(struct drbd_conf *mdev)
+{
+	struct page *page = NULL;
+
+	/* Yes, testing drbd_pp_vacant outside the lock is racy.
+	 * So what. It saves a spin_lock. */
+	if (drbd_pp_vacant > 0) {
+		spin_lock(&drbd_pp_lock);
+		page = drbd_pp_pool;
+		if (page) {
+			drbd_pp_pool = (struct page *)page_private(page);
+			set_page_private(page, 0); /* just to be polite */
+			drbd_pp_vacant--;
+		}
+		spin_unlock(&drbd_pp_lock);
+	}
+	/* GFP_TRY, because we must not cause arbitrary write-out: in a DRBD
+	 * "criss-cross" setup, that might cause write-out on some other DRBD,
+	 * which in turn might block on the other node at this very place.  */
+	if (!page)
+		page = alloc_page(GFP_TRY);
+	if (page)
+		atomic_inc(&mdev->pp_in_use);
+	return page;
+}
+
+/* kick lower level device, if we have more than (arbitrary number)
+ * reference counts on it, which typically are locally submitted io
+ * requests.  don't use unacked_cnt, so we speed up proto A and B, too. */
+static void maybe_kick_lo(struct drbd_conf *mdev)
+{
+	if (atomic_read(&mdev->local_cnt) >= mdev->net_conf->unplug_watermark)
+		drbd_kick_lo(mdev);
+}
+
+static void reclaim_net_ee(struct drbd_conf *mdev, struct list_head *to_be_freed)
+{
+	struct drbd_epoch_entry *e;
+	struct list_head *le, *tle;
+
+	/* The EEs are always appended to the end of the list. Since
+	   they are sent in order over the wire, they have to finish
+	   in order. As soon as we see the first not finished we can
+	   stop to examine the list... */
+
+	list_for_each_safe(le, tle, &mdev->net_ee) {
+		e = list_entry(le, struct drbd_epoch_entry, w.list);
+		if (drbd_bio_has_active_page(e->private_bio))
+			break;
+		list_move(le, to_be_freed);
+	}
+}
+
+static void drbd_kick_lo_and_reclaim_net(struct drbd_conf *mdev)
+{
+	LIST_HEAD(reclaimed);
+	struct drbd_epoch_entry *e, *t;
+
+	maybe_kick_lo(mdev);
+	spin_lock_irq(&mdev->req_lock);
+	reclaim_net_ee(mdev, &reclaimed);
+	spin_unlock_irq(&mdev->req_lock);
+
+	list_for_each_entry_safe(e, t, &reclaimed, w.list)
+		drbd_free_ee(mdev, e);
+}
+
+/**
+ * drbd_pp_alloc() - Returns a page, fails only if a signal comes in
+ * @mdev:	DRBD device.
+ * @retry:	whether or not to retry allocation forever (or until signalled)
+ *
+ * Tries to allocate a page, first from our own page pool, then from the
+ * kernel, unless this allocation would exceed the max_buffers setting.
+ * If @retry is non-zero, retry until DRBD frees a page somewhere else.
+ */
+static struct page *drbd_pp_alloc(struct drbd_conf *mdev, int retry)
+{
+	struct page *page = NULL;
+	DEFINE_WAIT(wait);
+
+	if (atomic_read(&mdev->pp_in_use) < mdev->net_conf->max_buffers) {
+		page = drbd_pp_first_page_or_try_alloc(mdev);
+		if (page)
+			return page;
+	}
+
+	for (;;) {
+		prepare_to_wait(&drbd_pp_wait, &wait, TASK_INTERRUPTIBLE);
+
+		drbd_kick_lo_and_reclaim_net(mdev);
+
+		if (atomic_read(&mdev->pp_in_use) < mdev->net_conf->max_buffers) {
+			page = drbd_pp_first_page_or_try_alloc(mdev);
+			if (page)
+				break;
+		}
+
+		if (!retry)
+			break;
+
+		if (signal_pending(current)) {
+			dev_warn(DEV, "drbd_pp_alloc interrupted!\n");
+			break;
+		}
+
+		schedule();
+	}
+	finish_wait(&drbd_pp_wait, &wait);
+
+	return page;
+}
+
+/* Must not be used from irq, as that may deadlock: see drbd_pp_alloc.
+ * Is also used from inside an other spin_lock_irq(&mdev->req_lock) */
+static void drbd_pp_free(struct drbd_conf *mdev, struct page *page)
+{
+	int free_it;
+
+	spin_lock(&drbd_pp_lock);
+	if (drbd_pp_vacant > (DRBD_MAX_SEGMENT_SIZE/PAGE_SIZE)*minor_count) {
+		free_it = 1;
+	} else {
+		set_page_private(page, (unsigned long)drbd_pp_pool);
+		drbd_pp_pool = page;
+		drbd_pp_vacant++;
+		free_it = 0;
+	}
+	spin_unlock(&drbd_pp_lock);
+
+	atomic_dec(&mdev->pp_in_use);
+
+	if (free_it)
+		__free_page(page);
+
+	wake_up(&drbd_pp_wait);
+}
+
+static void drbd_pp_free_bio_pages(struct drbd_conf *mdev, struct bio *bio)
+{
+	struct page *p_to_be_freed = NULL;
+	struct page *page;
+	struct bio_vec *bvec;
+	int i;
+
+	spin_lock(&drbd_pp_lock);
+	__bio_for_each_segment(bvec, bio, i, 0) {
+		if (drbd_pp_vacant > (DRBD_MAX_SEGMENT_SIZE/PAGE_SIZE)*minor_count) {
+			set_page_private(bvec->bv_page, (unsigned long)p_to_be_freed);
+			p_to_be_freed = bvec->bv_page;
+		} else {
+			set_page_private(bvec->bv_page, (unsigned long)drbd_pp_pool);
+			drbd_pp_pool = bvec->bv_page;
+			drbd_pp_vacant++;
+		}
+	}
+	spin_unlock(&drbd_pp_lock);
+	atomic_sub(bio->bi_vcnt, &mdev->pp_in_use);
+
+	while (p_to_be_freed) {
+		page = p_to_be_freed;
+		p_to_be_freed = (struct page *)page_private(page);
+		set_page_private(page, 0); /* just to be polite */
+		put_page(page);
+	}
+
+	wake_up(&drbd_pp_wait);
+}
+
+/*
+You need to hold the req_lock:
+ _drbd_wait_ee_list_empty()
+
+You must not have the req_lock:
+ drbd_free_ee()
+ drbd_alloc_ee()
+ drbd_init_ee()
+ drbd_release_ee()
+ drbd_ee_fix_bhs()
+ drbd_process_done_ee()
+ drbd_clear_done_ee()
+ drbd_wait_ee_list_empty()
+*/
+
+struct drbd_epoch_entry *drbd_alloc_ee(struct drbd_conf *mdev,
+				     u64 id,
+				     sector_t sector,
+				     unsigned int data_size,
+				     gfp_t gfp_mask) __must_hold(local)
+{
+	struct request_queue *q;
+	struct drbd_epoch_entry *e;
+	struct page *page;
+	struct bio *bio;
+	unsigned int ds;
+
+	if (FAULT_ACTIVE(mdev, DRBD_FAULT_AL_EE))
+		return NULL;
+
+	e = mempool_alloc(drbd_ee_mempool, gfp_mask & ~__GFP_HIGHMEM);
+	if (!e) {
+		if (!(gfp_mask & __GFP_NOWARN))
+			dev_err(DEV, "alloc_ee: Allocation of an EE failed\n");
+		return NULL;
+	}
+
+	bio = bio_alloc(gfp_mask & ~__GFP_HIGHMEM, div_ceil(data_size, PAGE_SIZE));
+	if (!bio) {
+		if (!(gfp_mask & __GFP_NOWARN))
+			dev_err(DEV, "alloc_ee: Allocation of a bio failed\n");
+		goto fail1;
+	}
+
+	bio->bi_bdev = mdev->ldev->backing_bdev;
+	bio->bi_sector = sector;
+
+	ds = data_size;
+	while (ds) {
+		page = drbd_pp_alloc(mdev, (gfp_mask & __GFP_WAIT));
+		if (!page) {
+			if (!(gfp_mask & __GFP_NOWARN))
+				dev_err(DEV, "alloc_ee: Allocation of a page failed\n");
+			goto fail2;
+		}
+		if (!bio_add_page(bio, page, min_t(int, ds, PAGE_SIZE), 0)) {
+			drbd_pp_free(mdev, page);
+			dev_err(DEV, "alloc_ee: bio_add_page(s=%llu,"
+			    "data_size=%u,ds=%u) failed\n",
+			    (unsigned long long)sector, data_size, ds);
+
+			q = bdev_get_queue(bio->bi_bdev);
+			if (q->merge_bvec_fn) {
+				struct bvec_merge_data bvm = {
+					.bi_bdev = bio->bi_bdev,
+					.bi_sector = bio->bi_sector,
+					.bi_size = bio->bi_size,
+					.bi_rw = bio->bi_rw,
+				};
+				int l = q->merge_bvec_fn(q, &bvm,
+						&bio->bi_io_vec[bio->bi_vcnt]);
+				dev_err(DEV, "merge_bvec_fn() = %d\n", l);
+			}
+
+			/* dump more of the bio. */
+			dev_err(DEV, "bio->bi_max_vecs = %d\n", bio->bi_max_vecs);
+			dev_err(DEV, "bio->bi_vcnt = %d\n", bio->bi_vcnt);
+			dev_err(DEV, "bio->bi_size = %d\n", bio->bi_size);
+			dev_err(DEV, "bio->bi_phys_segments = %d\n", bio->bi_phys_segments);
+
+			goto fail2;
+			break;
+		}
+		ds -= min_t(int, ds, PAGE_SIZE);
+	}
+
+	D_ASSERT(data_size == bio->bi_size);
+
+	bio->bi_private = e;
+	e->mdev = mdev;
+	e->sector = sector;
+	e->size = bio->bi_size;
+
+	e->private_bio = bio;
+	e->block_id = id;
+	INIT_HLIST_NODE(&e->colision);
+	e->epoch = NULL;
+	e->flags = 0;
+
+	return e;
+
+ fail2:
+	drbd_pp_free_bio_pages(mdev, bio);
+	bio_put(bio);
+ fail1:
+	mempool_free(e, drbd_ee_mempool);
+
+	return NULL;
+}
+
+void drbd_free_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e)
+{
+	struct bio *bio = e->private_bio;
+	drbd_pp_free_bio_pages(mdev, bio);
+	bio_put(bio);
+	D_ASSERT(hlist_unhashed(&e->colision));
+	mempool_free(e, drbd_ee_mempool);
+}
+
+int drbd_release_ee(struct drbd_conf *mdev, struct list_head *list)
+{
+	LIST_HEAD(work_list);
+	struct drbd_epoch_entry *e, *t;
+	int count = 0;
+
+	spin_lock_irq(&mdev->req_lock);
+	list_splice_init(list, &work_list);
+	spin_unlock_irq(&mdev->req_lock);
+
+	list_for_each_entry_safe(e, t, &work_list, w.list) {
+		drbd_free_ee(mdev, e);
+		count++;
+	}
+	return count;
+}
+
+
+/*
+ * This function is called from _asender only_
+ * but see also comments in _req_mod(,barrier_acked)
+ * and receive_Barrier.
+ *
+ * Move entries from net_ee to done_ee, if ready.
+ * Grab done_ee, call all callbacks, free the entries.
+ * The callbacks typically send out ACKs.
+ */
+static int drbd_process_done_ee(struct drbd_conf *mdev)
+{
+	LIST_HEAD(work_list);
+	LIST_HEAD(reclaimed);
+	struct drbd_epoch_entry *e, *t;
+	int ok = (mdev->state.conn >= C_WF_REPORT_PARAMS);
+
+	spin_lock_irq(&mdev->req_lock);
+	reclaim_net_ee(mdev, &reclaimed);
+	list_splice_init(&mdev->done_ee, &work_list);
+	spin_unlock_irq(&mdev->req_lock);
+
+	list_for_each_entry_safe(e, t, &reclaimed, w.list)
+		drbd_free_ee(mdev, e);
+
+	/* possible callbacks here:
+	 * e_end_block, and e_end_resync_block, e_send_discard_ack.
+	 * all ignore the last argument.
+	 */
+	list_for_each_entry_safe(e, t, &work_list, w.list) {
+		/* list_del not necessary, next/prev members not touched */
+		ok = e->w.cb(mdev, &e->w, !ok) && ok;
+		drbd_free_ee(mdev, e);
+	}
+	wake_up(&mdev->ee_wait);
+
+	return ok;
+}
+
+void _drbd_wait_ee_list_empty(struct drbd_conf *mdev, struct list_head *head)
+{
+	DEFINE_WAIT(wait);
+
+	/* avoids spin_lock/unlock
+	 * and calling prepare_to_wait in the fast path */
+	while (!list_empty(head)) {
+		prepare_to_wait(&mdev->ee_wait, &wait, TASK_UNINTERRUPTIBLE);
+		spin_unlock_irq(&mdev->req_lock);
+		drbd_kick_lo(mdev);
+		schedule();
+		finish_wait(&mdev->ee_wait, &wait);
+		spin_lock_irq(&mdev->req_lock);
+	}
+}
+
+void drbd_wait_ee_list_empty(struct drbd_conf *mdev, struct list_head *head)
+{
+	spin_lock_irq(&mdev->req_lock);
+	_drbd_wait_ee_list_empty(mdev, head);
+	spin_unlock_irq(&mdev->req_lock);
+}
+
+/* see also kernel_accept; which is only present since 2.6.18.
+ * also we want to log which part of it failed, exactly */
+static int drbd_accept(struct drbd_conf *mdev, const char **what,
+		struct socket *sock, struct socket **newsock)
+{
+	struct sock *sk = sock->sk;
+	int err = 0;
+
+	*what = "listen";
+	err = sock->ops->listen(sock, 5);
+	if (err < 0)
+		goto out;
+
+	*what = "sock_create_lite";
+	err = sock_create_lite(sk->sk_family, sk->sk_type, sk->sk_protocol,
+			       newsock);
+	if (err < 0)
+		goto out;
+
+	*what = "accept";
+	err = sock->ops->accept(sock, *newsock, 0);
+	if (err < 0) {
+		sock_release(*newsock);
+		*newsock = NULL;
+		goto out;
+	}
+	(*newsock)->ops  = sock->ops;
+
+out:
+	return err;
+}
+
+static int drbd_recv_short(struct drbd_conf *mdev, struct socket *sock,
+		    void *buf, size_t size, int flags)
+{
+	mm_segment_t oldfs;
+	struct kvec iov = {
+		.iov_base = buf,
+		.iov_len = size,
+	};
+	struct msghdr msg = {
+		.msg_iovlen = 1,
+		.msg_iov = (struct iovec *)&iov,
+		.msg_flags = (flags ? flags : MSG_WAITALL | MSG_NOSIGNAL)
+	};
+	int rv;
+
+	oldfs = get_fs();
+	set_fs(KERNEL_DS);
+	rv = sock_recvmsg(sock, &msg, size, msg.msg_flags);
+	set_fs(oldfs);
+
+	return rv;
+}
+
+static int drbd_recv(struct drbd_conf *mdev, void *buf, size_t size)
+{
+	mm_segment_t oldfs;
+	struct kvec iov = {
+		.iov_base = buf,
+		.iov_len = size,
+	};
+	struct msghdr msg = {
+		.msg_iovlen = 1,
+		.msg_iov = (struct iovec *)&iov,
+		.msg_flags = MSG_WAITALL | MSG_NOSIGNAL
+	};
+	int rv;
+
+	oldfs = get_fs();
+	set_fs(KERNEL_DS);
+
+	for (;;) {
+		rv = sock_recvmsg(mdev->data.socket, &msg, size, msg.msg_flags);
+		if (rv == size)
+			break;
+
+		/* Note:
+		 * ECONNRESET	other side closed the connection
+		 * ERESTARTSYS	(on  sock) we got a signal
+		 */
+
+		if (rv < 0) {
+			if (rv == -ECONNRESET)
+				dev_info(DEV, "sock was reset by peer\n");
+			else if (rv != -ERESTARTSYS)
+				dev_err(DEV, "sock_recvmsg returned %d\n", rv);
+			break;
+		} else if (rv == 0) {
+			dev_info(DEV, "sock was shut down by peer\n");
+			break;
+		} else	{
+			/* signal came in, or peer/link went down,
+			 * after we read a partial message
+			 */
+			/* D_ASSERT(signal_pending(current)); */
+			break;
+		}
+	};
+
+	set_fs(oldfs);
+
+	if (rv != size)
+		drbd_force_state(mdev, NS(conn, C_BROKEN_PIPE));
+
+	return rv;
+}
+
+static struct socket *drbd_try_connect(struct drbd_conf *mdev)
+{
+	const char *what;
+	struct socket *sock;
+	struct sockaddr_in6 src_in6;
+	int err;
+	int disconnect_on_error = 1;
+
+	if (!get_net_conf(mdev))
+		return NULL;
+
+	what = "sock_create_kern";
+	err = sock_create_kern(((struct sockaddr *)mdev->net_conf->my_addr)->sa_family,
+		SOCK_STREAM, IPPROTO_TCP, &sock);
+	if (err < 0) {
+		sock = NULL;
+		goto out;
+	}
+
+	sock->sk->sk_rcvtimeo =
+	sock->sk->sk_sndtimeo =  mdev->net_conf->try_connect_int*HZ;
+
+       /* explicitly bind to the configured IP as source IP
+	*  for the outgoing connections.
+	*  This is needed for multihomed hosts and to be
+	*  able to use lo: interfaces for drbd.
+	* Make sure to use 0 as port number, so linux selects
+	*  a free one dynamically.
+	*/
+	memcpy(&src_in6, mdev->net_conf->my_addr,
+	       min_t(int, mdev->net_conf->my_addr_len, sizeof(src_in6)));
+	if (((struct sockaddr *)mdev->net_conf->my_addr)->sa_family == AF_INET6)
+		src_in6.sin6_port = 0;
+	else
+		((struct sockaddr_in *)&src_in6)->sin_port = 0; /* AF_INET & AF_SCI */
+
+	what = "bind before connect";
+	err = sock->ops->bind(sock,
+			      (struct sockaddr *) &src_in6,
+			      mdev->net_conf->my_addr_len);
+	if (err < 0)
+		goto out;
+
+	/* connect may fail, peer not yet available.
+	 * stay C_WF_CONNECTION, don't go Disconnecting! */
+	disconnect_on_error = 0;
+	what = "connect";
+	err = sock->ops->connect(sock,
+				 (struct sockaddr *)mdev->net_conf->peer_addr,
+				 mdev->net_conf->peer_addr_len, 0);
+
+out:
+	if (err < 0) {
+		if (sock) {
+			sock_release(sock);
+			sock = NULL;
+		}
+		switch (-err) {
+			/* timeout, busy, signal pending */
+		case ETIMEDOUT: case EAGAIN: case EINPROGRESS:
+		case EINTR: case ERESTARTSYS:
+			/* peer not (yet) available, network problem */
+		case ECONNREFUSED: case ENETUNREACH:
+		case EHOSTDOWN:    case EHOSTUNREACH:
+			disconnect_on_error = 0;
+			break;
+		default:
+			dev_err(DEV, "%s failed, err = %d\n", what, err);
+		}
+		if (disconnect_on_error)
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+	}
+	put_net_conf(mdev);
+	return sock;
+}
+
+static struct socket *drbd_wait_for_connect(struct drbd_conf *mdev)
+{
+	int timeo, err;
+	struct socket *s_estab = NULL, *s_listen;
+	const char *what;
+
+	if (!get_net_conf(mdev))
+		return NULL;
+
+	what = "sock_create_kern";
+	err = sock_create_kern(((struct sockaddr *)mdev->net_conf->my_addr)->sa_family,
+		SOCK_STREAM, IPPROTO_TCP, &s_listen);
+	if (err) {
+		s_listen = NULL;
+		goto out;
+	}
+
+	timeo = mdev->net_conf->try_connect_int * HZ;
+	timeo += (random32() & 1) ? timeo / 7 : -timeo / 7; /* 28.5% random jitter */
+
+	s_listen->sk->sk_reuse    = 1; /* SO_REUSEADDR */
+	s_listen->sk->sk_rcvtimeo = timeo;
+	s_listen->sk->sk_sndtimeo = timeo;
+
+	what = "bind before listen";
+	err = s_listen->ops->bind(s_listen,
+			      (struct sockaddr *) mdev->net_conf->my_addr,
+			      mdev->net_conf->my_addr_len);
+	if (err < 0)
+		goto out;
+
+	err = drbd_accept(mdev, &what, s_listen, &s_estab);
+
+out:
+	if (s_listen)
+		sock_release(s_listen);
+	if (err < 0) {
+		if (err != -EAGAIN && err != -EINTR && err != -ERESTARTSYS) {
+			dev_err(DEV, "%s failed, err = %d\n", what, err);
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+		}
+	}
+	put_net_conf(mdev);
+
+	return s_estab;
+}
+
+static int drbd_send_fp(struct drbd_conf *mdev,
+	struct socket *sock, enum drbd_packets cmd)
+{
+	struct p_header *h = (struct p_header *) &mdev->data.sbuf.header;
+
+	return _drbd_send_cmd(mdev, sock, cmd, h, sizeof(*h), 0);
+}
+
+static enum drbd_packets drbd_recv_fp(struct drbd_conf *mdev, struct socket *sock)
+{
+	struct p_header *h = (struct p_header *) &mdev->data.sbuf.header;
+	int rr;
+
+	rr = drbd_recv_short(mdev, sock, h, sizeof(*h), 0);
+
+	if (rr == sizeof(*h) && h->magic == BE_DRBD_MAGIC)
+		return be16_to_cpu(h->command);
+
+	return 0xffff;
+}
+
+/**
+ * drbd_socket_okay() - Free the socket if its connection is not okay
+ * @mdev:	DRBD device.
+ * @sock:	pointer to the pointer to the socket.
+ */
+static int drbd_socket_okay(struct drbd_conf *mdev, struct socket **sock)
+{
+	int rr;
+	char tb[4];
+
+	if (!*sock)
+		return FALSE;
+
+	rr = drbd_recv_short(mdev, *sock, tb, 4, MSG_DONTWAIT | MSG_PEEK);
+
+	if (rr > 0 || rr == -EAGAIN) {
+		return TRUE;
+	} else {
+		sock_release(*sock);
+		*sock = NULL;
+		return FALSE;
+	}
+}
+
+/*
+ * return values:
+ *   1 yes, we have a valid connection
+ *   0 oops, did not work out, please try again
+ *  -1 peer talks different language,
+ *     no point in trying again, please go standalone.
+ *  -2 We do not have a network config...
+ */
+static int drbd_connect(struct drbd_conf *mdev)
+{
+	struct socket *s, *sock, *msock;
+	int try, h, ok;
+
+	D_ASSERT(!mdev->data.socket);
+
+	if (test_and_clear_bit(CREATE_BARRIER, &mdev->flags))
+		dev_err(DEV, "CREATE_BARRIER flag was set in drbd_connect - now cleared!\n");
+
+	if (drbd_request_state(mdev, NS(conn, C_WF_CONNECTION)) < SS_SUCCESS)
+		return -2;
+
+	clear_bit(DISCARD_CONCURRENT, &mdev->flags);
+
+	sock  = NULL;
+	msock = NULL;
+
+	do {
+		for (try = 0;;) {
+			/* 3 tries, this should take less than a second! */
+			s = drbd_try_connect(mdev);
+			if (s || ++try >= 3)
+				break;
+			/* give the other side time to call bind() & listen() */
+			__set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(HZ / 10);
+		}
+
+		if (s) {
+			if (!sock) {
+				drbd_send_fp(mdev, s, P_HAND_SHAKE_S);
+				sock = s;
+				s = NULL;
+			} else if (!msock) {
+				drbd_send_fp(mdev, s, P_HAND_SHAKE_M);
+				msock = s;
+				s = NULL;
+			} else {
+				dev_err(DEV, "Logic error in drbd_connect()\n");
+				goto out_release_sockets;
+			}
+		}
+
+		if (sock && msock) {
+			__set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(HZ / 10);
+			ok = drbd_socket_okay(mdev, &sock);
+			ok = drbd_socket_okay(mdev, &msock) && ok;
+			if (ok)
+				break;
+		}
+
+retry:
+		s = drbd_wait_for_connect(mdev);
+		if (s) {
+			try = drbd_recv_fp(mdev, s);
+			drbd_socket_okay(mdev, &sock);
+			drbd_socket_okay(mdev, &msock);
+			switch (try) {
+			case P_HAND_SHAKE_S:
+				if (sock) {
+					dev_warn(DEV, "initial packet S crossed\n");
+					sock_release(sock);
+				}
+				sock = s;
+				break;
+			case P_HAND_SHAKE_M:
+				if (msock) {
+					dev_warn(DEV, "initial packet M crossed\n");
+					sock_release(msock);
+				}
+				msock = s;
+				set_bit(DISCARD_CONCURRENT, &mdev->flags);
+				break;
+			default:
+				dev_warn(DEV, "Error receiving initial packet\n");
+				sock_release(s);
+				if (random32() & 1)
+					goto retry;
+			}
+		}
+
+		if (mdev->state.conn <= C_DISCONNECTING)
+			goto out_release_sockets;
+		if (signal_pending(current)) {
+			flush_signals(current);
+			smp_rmb();
+			if (get_t_state(&mdev->receiver) == Exiting)
+				goto out_release_sockets;
+		}
+
+		if (sock && msock) {
+			ok = drbd_socket_okay(mdev, &sock);
+			ok = drbd_socket_okay(mdev, &msock) && ok;
+			if (ok)
+				break;
+		}
+	} while (1);
+
+	msock->sk->sk_reuse = 1; /* SO_REUSEADDR */
+	sock->sk->sk_reuse = 1; /* SO_REUSEADDR */
+
+	sock->sk->sk_allocation = GFP_NOIO;
+	msock->sk->sk_allocation = GFP_NOIO;
+
+	sock->sk->sk_priority = TC_PRIO_INTERACTIVE_BULK;
+	msock->sk->sk_priority = TC_PRIO_INTERACTIVE;
+
+	if (mdev->net_conf->sndbuf_size) {
+		sock->sk->sk_sndbuf = mdev->net_conf->sndbuf_size;
+		sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
+	}
+
+	if (mdev->net_conf->rcvbuf_size) {
+		sock->sk->sk_rcvbuf = mdev->net_conf->rcvbuf_size;
+		sock->sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
+	}
+
+	/* NOT YET ...
+	 * sock->sk->sk_sndtimeo = mdev->net_conf->timeout*HZ/10;
+	 * sock->sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT;
+	 * first set it to the P_HAND_SHAKE timeout,
+	 * which we set to 4x the configured ping_timeout. */
+	sock->sk->sk_sndtimeo =
+	sock->sk->sk_rcvtimeo = mdev->net_conf->ping_timeo*4*HZ/10;
+
+	msock->sk->sk_sndtimeo = mdev->net_conf->timeout*HZ/10;
+	msock->sk->sk_rcvtimeo = mdev->net_conf->ping_int*HZ;
+
+	/* we don't want delays.
+	 * we use TCP_CORK where apropriate, though */
+	drbd_tcp_nodelay(sock);
+	drbd_tcp_nodelay(msock);
+
+	mdev->data.socket = sock;
+	mdev->meta.socket = msock;
+	mdev->last_received = jiffies;
+
+	D_ASSERT(mdev->asender.task == NULL);
+
+	h = drbd_do_handshake(mdev);
+	if (h <= 0)
+		return h;
+
+	if (mdev->cram_hmac_tfm) {
+		/* drbd_request_state(mdev, NS(conn, WFAuth)); */
+		if (!drbd_do_auth(mdev)) {
+			dev_err(DEV, "Authentication of peer failed\n");
+			return -1;
+		}
+	}
+
+	if (drbd_request_state(mdev, NS(conn, C_WF_REPORT_PARAMS)) < SS_SUCCESS)
+		return 0;
+
+	sock->sk->sk_sndtimeo = mdev->net_conf->timeout*HZ/10;
+	sock->sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT;
+
+	atomic_set(&mdev->packet_seq, 0);
+	mdev->peer_seq = 0;
+
+	drbd_thread_start(&mdev->asender);
+
+	drbd_send_protocol(mdev);
+	drbd_send_sync_param(mdev, &mdev->sync_conf);
+	drbd_send_sizes(mdev, 0);
+	drbd_send_uuids(mdev);
+	drbd_send_state(mdev);
+	clear_bit(USE_DEGR_WFC_T, &mdev->flags);
+	clear_bit(RESIZE_PENDING, &mdev->flags);
+
+	return 1;
+
+out_release_sockets:
+	if (sock)
+		sock_release(sock);
+	if (msock)
+		sock_release(msock);
+	return -1;
+}
+
+static int drbd_recv_header(struct drbd_conf *mdev, struct p_header *h)
+{
+	int r;
+
+	r = drbd_recv(mdev, h, sizeof(*h));
+
+	if (unlikely(r != sizeof(*h))) {
+		dev_err(DEV, "short read expecting header on sock: r=%d\n", r);
+		return FALSE;
+	};
+	h->command = be16_to_cpu(h->command);
+	h->length  = be16_to_cpu(h->length);
+	if (unlikely(h->magic != BE_DRBD_MAGIC)) {
+		dev_err(DEV, "magic?? on data m: 0x%lx c: %d l: %d\n",
+		    (long)be32_to_cpu(h->magic),
+		    h->command, h->length);
+		return FALSE;
+	}
+	mdev->last_received = jiffies;
+
+	return TRUE;
+}
+
+static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
+{
+	int rv;
+
+	if (mdev->write_ordering >= WO_bdev_flush && get_ldev(mdev)) {
+		rv = blkdev_issue_flush(mdev->ldev->backing_bdev, NULL);
+		if (rv) {
+			dev_err(DEV, "local disk flush failed with status %d\n", rv);
+			/* would rather check on EOPNOTSUPP, but that is not reliable.
+			 * don't try again for ANY return value != 0
+			 * if (rv == -EOPNOTSUPP) */
+			drbd_bump_write_ordering(mdev, WO_drain_io);
+		}
+		put_ldev(mdev);
+	}
+
+	return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
+}
+
+static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct flush_work *fw = (struct flush_work *)w;
+	struct drbd_epoch *epoch = fw->epoch;
+
+	kfree(w);
+
+	if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags))
+		drbd_flush_after_epoch(mdev, epoch);
+
+	drbd_may_finish_epoch(mdev, epoch, EV_PUT |
+			      (mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0));
+
+	return 1;
+}
+
+/**
+ * drbd_may_finish_epoch() - Applies an epoch_event to the epoch's state, eventually finishes it.
+ * @mdev:	DRBD device.
+ * @epoch:	Epoch object.
+ * @ev:		Epoch event.
+ */
+static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
+					       struct drbd_epoch *epoch,
+					       enum epoch_event ev)
+{
+	int finish, epoch_size;
+	struct drbd_epoch *next_epoch;
+	int schedule_flush = 0;
+	enum finish_epoch rv = FE_STILL_LIVE;
+
+	spin_lock(&mdev->epoch_lock);
+	do {
+		next_epoch = NULL;
+		finish = 0;
+
+		epoch_size = atomic_read(&epoch->epoch_size);
+
+		switch (ev & ~EV_CLEANUP) {
+		case EV_PUT:
+			atomic_dec(&epoch->active);
+			break;
+		case EV_GOT_BARRIER_NR:
+			set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags);
+
+			/* Special case: If we just switched from WO_bio_barrier to
+			   WO_bdev_flush we should not finish the current epoch */
+			if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 &&
+			    mdev->write_ordering != WO_bio_barrier &&
+			    epoch == mdev->current_epoch)
+				clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags);
+			break;
+		case EV_BARRIER_DONE:
+			set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags);
+			break;
+		case EV_BECAME_LAST:
+			/* nothing to do*/
+			break;
+		}
+
+		if (epoch_size != 0 &&
+		    atomic_read(&epoch->active) == 0 &&
+		    test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) &&
+		    epoch->list.prev == &mdev->current_epoch->list &&
+		    !test_bit(DE_IS_FINISHING, &epoch->flags)) {
+			/* Nearly all conditions are met to finish that epoch... */
+			if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) ||
+			    mdev->write_ordering == WO_none ||
+			    (epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) ||
+			    ev & EV_CLEANUP) {
+				finish = 1;
+				set_bit(DE_IS_FINISHING, &epoch->flags);
+			} else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) &&
+				 mdev->write_ordering == WO_bio_barrier) {
+				atomic_inc(&epoch->active);
+				schedule_flush = 1;
+			}
+		}
+		if (finish) {
+			if (!(ev & EV_CLEANUP)) {
+				spin_unlock(&mdev->epoch_lock);
+				drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size);
+				spin_lock(&mdev->epoch_lock);
+			}
+			dec_unacked(mdev);
+
+			if (mdev->current_epoch != epoch) {
+				next_epoch = list_entry(epoch->list.next, struct drbd_epoch, list);
+				list_del(&epoch->list);
+				ev = EV_BECAME_LAST | (ev & EV_CLEANUP);
+				mdev->epochs--;
+				kfree(epoch);
+
+				if (rv == FE_STILL_LIVE)
+					rv = FE_DESTROYED;
+			} else {
+				epoch->flags = 0;
+				atomic_set(&epoch->epoch_size, 0);
+				/* atomic_set(&epoch->active, 0); is alrady zero */
+				if (rv == FE_STILL_LIVE)
+					rv = FE_RECYCLED;
+			}
+		}
+
+		if (!next_epoch)
+			break;
+
+		epoch = next_epoch;
+	} while (1);
+
+	spin_unlock(&mdev->epoch_lock);
+
+	if (schedule_flush) {
+		struct flush_work *fw;
+		fw = kmalloc(sizeof(*fw), GFP_ATOMIC);
+		if (fw) {
+			fw->w.cb = w_flush;
+			fw->epoch = epoch;
+			drbd_queue_work(&mdev->data.work, &fw->w);
+		} else {
+			dev_warn(DEV, "Could not kmalloc a flush_work obj\n");
+			set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
+			/* That is not a recursion, only one level */
+			drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
+			drbd_may_finish_epoch(mdev, epoch, EV_PUT);
+		}
+	}
+
+	return rv;
+}
+
+/**
+ * drbd_bump_write_ordering() - Fall back to an other write ordering method
+ * @mdev:	DRBD device.
+ * @wo:		Write ordering method to try.
+ */
+void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo) __must_hold(local)
+{
+	enum write_ordering_e pwo;
+	static char *write_ordering_str[] = {
+		[WO_none] = "none",
+		[WO_drain_io] = "drain",
+		[WO_bdev_flush] = "flush",
+		[WO_bio_barrier] = "barrier",
+	};
+
+	pwo = mdev->write_ordering;
+	wo = min(pwo, wo);
+	if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier)
+		wo = WO_bdev_flush;
+	if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush)
+		wo = WO_drain_io;
+	if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain)
+		wo = WO_none;
+	mdev->write_ordering = wo;
+	if (pwo != mdev->write_ordering || wo == WO_bio_barrier)
+		dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]);
+}
+
+/**
+ * w_e_reissue() - Worker callback; Resubmit a bio, without BIO_RW_BARRIER set
+ * @mdev:	DRBD device.
+ * @w:		work object.
+ * @cancel:	The connection will be closed anyways (unused in this callback)
+ */
+int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local)
+{
+	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
+	struct bio *bio = e->private_bio;
+
+	/* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place,
+	   (and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
+	   so that we can finish that epoch in drbd_may_finish_epoch().
+	   That is necessary if we already have a long chain of Epochs, before
+	   we realize that BIO_RW_BARRIER is actually not supported */
+
+	/* As long as the -ENOTSUPP on the barrier is reported immediately
+	   that will never trigger. If it is reported late, we will just
+	   print that warning and continue correctly for all future requests
+	   with WO_bdev_flush */
+	if (previous_epoch(mdev, e->epoch))
+		dev_warn(DEV, "Write ordering was not enforced (one time event)\n");
+
+	/* prepare bio for re-submit,
+	 * re-init volatile members */
+	/* we still have a local reference,
+	 * get_ldev was done in receive_Data. */
+	bio->bi_bdev = mdev->ldev->backing_bdev;
+	bio->bi_sector = e->sector;
+	bio->bi_size = e->size;
+	bio->bi_idx = 0;
+
+	bio->bi_flags &= ~(BIO_POOL_MASK - 1);
+	bio->bi_flags |= 1 << BIO_UPTODATE;
+
+	/* don't know whether this is necessary: */
+	bio->bi_phys_segments = 0;
+	bio->bi_next = NULL;
+
+	/* these should be unchanged: */
+	/* bio->bi_end_io = drbd_endio_write_sec; */
+	/* bio->bi_vcnt = whatever; */
+
+	e->w.cb = e_end_block;
+
+	/* This is no longer a barrier request. */
+	bio->bi_rw &= ~(1UL << BIO_RW_BARRIER);
+
+	drbd_generic_make_request(mdev, DRBD_FAULT_DT_WR, bio);
+
+	return 1;
+}
+
+static int receive_Barrier(struct drbd_conf *mdev, struct p_header *h)
+{
+	int rv, issue_flush;
+	struct p_barrier *p = (struct p_barrier *)h;
+	struct drbd_epoch *epoch;
+
+	ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
+
+	rv = drbd_recv(mdev, h->payload, h->length);
+	ERR_IF(rv != h->length) return FALSE;
+
+	inc_unacked(mdev);
+
+	if (mdev->net_conf->wire_protocol != DRBD_PROT_C)
+		drbd_kick_lo(mdev);
+
+	mdev->current_epoch->barrier_nr = p->barrier;
+	rv = drbd_may_finish_epoch(mdev, mdev->current_epoch, EV_GOT_BARRIER_NR);
+
+	/* P_BARRIER_ACK may imply that the corresponding extent is dropped from
+	 * the activity log, which means it would not be resynced in case the
+	 * R_PRIMARY crashes now.
+	 * Therefore we must send the barrier_ack after the barrier request was
+	 * completed. */
+	switch (mdev->write_ordering) {
+	case WO_bio_barrier:
+	case WO_none:
+		if (rv == FE_RECYCLED)
+			return TRUE;
+		break;
+
+	case WO_bdev_flush:
+	case WO_drain_io:
+		D_ASSERT(rv == FE_STILL_LIVE);
+		set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
+		drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
+		rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+		if (rv == FE_RECYCLED)
+			return TRUE;
+
+		/* The asender will send all the ACKs and barrier ACKs out, since
+		   all EEs moved from the active_ee to the done_ee. We need to
+		   provide a new epoch object for the EEs that come in soon */
+		break;
+	}
+
+	/* receiver context, in the writeout path of the other node.
+	 * avoid potential distributed deadlock */
+	epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+	if (!epoch) {
+		dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
+		issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
+		drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
+		if (issue_flush) {
+			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
+			if (rv == FE_RECYCLED)
+				return TRUE;
+		}
+
+		drbd_wait_ee_list_empty(mdev, &mdev->done_ee);
+
+		return TRUE;
+	}
+
+	epoch->flags = 0;
+	atomic_set(&epoch->epoch_size, 0);
+	atomic_set(&epoch->active, 0);
+
+	spin_lock(&mdev->epoch_lock);
+	if (atomic_read(&mdev->current_epoch->epoch_size)) {
+		list_add(&epoch->list, &mdev->current_epoch->list);
+		mdev->current_epoch = epoch;
+		mdev->epochs++;
+	} else {
+		/* The current_epoch got recycled while we allocated this one... */
+		kfree(epoch);
+	}
+	spin_unlock(&mdev->epoch_lock);
+
+	return TRUE;
+}
+
+/* used from receive_RSDataReply (recv_resync_read)
+ * and from receive_Data */
+static struct drbd_epoch_entry *
+read_in_block(struct drbd_conf *mdev, u64 id, sector_t sector, int data_size) __must_hold(local)
+{
+	struct drbd_epoch_entry *e;
+	struct bio_vec *bvec;
+	struct page *page;
+	struct bio *bio;
+	int dgs, ds, i, rr;
+	void *dig_in = mdev->int_dig_in;
+	void *dig_vv = mdev->int_dig_vv;
+
+	dgs = (mdev->agreed_pro_version >= 87 && mdev->integrity_r_tfm) ?
+		crypto_hash_digestsize(mdev->integrity_r_tfm) : 0;
+
+	if (dgs) {
+		rr = drbd_recv(mdev, dig_in, dgs);
+		if (rr != dgs) {
+			dev_warn(DEV, "short read receiving data digest: read %d expected %d\n",
+			     rr, dgs);
+			return NULL;
+		}
+	}
+
+	data_size -= dgs;
+
+	ERR_IF(data_size &  0x1ff) return NULL;
+	ERR_IF(data_size >  DRBD_MAX_SEGMENT_SIZE) return NULL;
+
+	/* GFP_NOIO, because we must not cause arbitrary write-out: in a DRBD
+	 * "criss-cross" setup, that might cause write-out on some other DRBD,
+	 * which in turn might block on the other node at this very place.  */
+	e = drbd_alloc_ee(mdev, id, sector, data_size, GFP_NOIO);
+	if (!e)
+		return NULL;
+	bio = e->private_bio;
+	ds = data_size;
+	bio_for_each_segment(bvec, bio, i) {
+		page = bvec->bv_page;
+		rr = drbd_recv(mdev, kmap(page), min_t(int, ds, PAGE_SIZE));
+		kunmap(page);
+		if (rr != min_t(int, ds, PAGE_SIZE)) {
+			drbd_free_ee(mdev, e);
+			dev_warn(DEV, "short read receiving data: read %d expected %d\n",
+			     rr, min_t(int, ds, PAGE_SIZE));
+			return NULL;
+		}
+		ds -= rr;
+	}
+
+	if (dgs) {
+		drbd_csum(mdev, mdev->integrity_r_tfm, bio, dig_vv);
+		if (memcmp(dig_in, dig_vv, dgs)) {
+			dev_err(DEV, "Digest integrity check FAILED.\n");
+			drbd_bcast_ee(mdev, "digest failed",
+					dgs, dig_in, dig_vv, e);
+			drbd_free_ee(mdev, e);
+			return NULL;
+		}
+	}
+	mdev->recv_cnt += data_size>>9;
+	return e;
+}
+
+/* drbd_drain_block() just takes a data block
+ * out of the socket input buffer, and discards it.
+ */
+static int drbd_drain_block(struct drbd_conf *mdev, int data_size)
+{
+	struct page *page;
+	int rr, rv = 1;
+	void *data;
+
+	page = drbd_pp_alloc(mdev, 1);
+
+	data = kmap(page);
+	while (data_size) {
+		rr = drbd_recv(mdev, data, min_t(int, data_size, PAGE_SIZE));
+		if (rr != min_t(int, data_size, PAGE_SIZE)) {
+			rv = 0;
+			dev_warn(DEV, "short read receiving data: read %d expected %d\n",
+			     rr, min_t(int, data_size, PAGE_SIZE));
+			break;
+		}
+		data_size -= rr;
+	}
+	kunmap(page);
+	drbd_pp_free(mdev, page);
+	return rv;
+}
+
+static int recv_dless_read(struct drbd_conf *mdev, struct drbd_request *req,
+			   sector_t sector, int data_size)
+{
+	struct bio_vec *bvec;
+	struct bio *bio;
+	int dgs, rr, i, expect;
+	void *dig_in = mdev->int_dig_in;
+	void *dig_vv = mdev->int_dig_vv;
+
+	dgs = (mdev->agreed_pro_version >= 87 && mdev->integrity_r_tfm) ?
+		crypto_hash_digestsize(mdev->integrity_r_tfm) : 0;
+
+	if (dgs) {
+		rr = drbd_recv(mdev, dig_in, dgs);
+		if (rr != dgs) {
+			dev_warn(DEV, "short read receiving data reply digest: read %d expected %d\n",
+			     rr, dgs);
+			return 0;
+		}
+	}
+
+	data_size -= dgs;
+
+	/* optimistically update recv_cnt.  if receiving fails below,
+	 * we disconnect anyways, and counters will be reset. */
+	mdev->recv_cnt += data_size>>9;
+
+	bio = req->master_bio;
+	D_ASSERT(sector == bio->bi_sector);
+
+	bio_for_each_segment(bvec, bio, i) {
+		expect = min_t(int, data_size, bvec->bv_len);
+		rr = drbd_recv(mdev,
+			     kmap(bvec->bv_page)+bvec->bv_offset,
+			     expect);
+		kunmap(bvec->bv_page);
+		if (rr != expect) {
+			dev_warn(DEV, "short read receiving data reply: "
+			     "read %d expected %d\n",
+			     rr, expect);
+			return 0;
+		}
+		data_size -= rr;
+	}
+
+	if (dgs) {
+		drbd_csum(mdev, mdev->integrity_r_tfm, bio, dig_vv);
+		if (memcmp(dig_in, dig_vv, dgs)) {
+			dev_err(DEV, "Digest integrity check FAILED. Broken NICs?\n");
+			return 0;
+		}
+	}
+
+	D_ASSERT(data_size == 0);
+	return 1;
+}
+
+/* e_end_resync_block() is called via
+ * drbd_process_done_ee() by asender only */
+static int e_end_resync_block(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
+	sector_t sector = e->sector;
+	int ok;
+
+	D_ASSERT(hlist_unhashed(&e->colision));
+
+	if (likely(drbd_bio_uptodate(e->private_bio))) {
+		drbd_set_in_sync(mdev, sector, e->size);
+		ok = drbd_send_ack(mdev, P_RS_WRITE_ACK, e);
+	} else {
+		/* Record failure to sync */
+		drbd_rs_failed_io(mdev, sector, e->size);
+
+		ok  = drbd_send_ack(mdev, P_NEG_ACK, e);
+	}
+	dec_unacked(mdev);
+
+	return ok;
+}
+
+static int recv_resync_read(struct drbd_conf *mdev, sector_t sector, int data_size) __releases(local)
+{
+	struct drbd_epoch_entry *e;
+
+	e = read_in_block(mdev, ID_SYNCER, sector, data_size);
+	if (!e) {
+		put_ldev(mdev);
+		return FALSE;
+	}
+
+	dec_rs_pending(mdev);
+
+	e->private_bio->bi_end_io = drbd_endio_write_sec;
+	e->private_bio->bi_rw = WRITE;
+	e->w.cb = e_end_resync_block;
+
+	inc_unacked(mdev);
+	/* corresponding dec_unacked() in e_end_resync_block()
+	 * respective _drbd_clear_done_ee */
+
+	spin_lock_irq(&mdev->req_lock);
+	list_add(&e->w.list, &mdev->sync_ee);
+	spin_unlock_irq(&mdev->req_lock);
+
+	drbd_generic_make_request(mdev, DRBD_FAULT_RS_WR, e->private_bio);
+	/* accounting done in endio */
+
+	maybe_kick_lo(mdev);
+	return TRUE;
+}
+
+static int receive_DataReply(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct drbd_request *req;
+	sector_t sector;
+	unsigned int header_size, data_size;
+	int ok;
+	struct p_data *p = (struct p_data *)h;
+
+	header_size = sizeof(*p) - sizeof(*h);
+	data_size   = h->length  - header_size;
+
+	ERR_IF(data_size == 0) return FALSE;
+
+	if (drbd_recv(mdev, h->payload, header_size) != header_size)
+		return FALSE;
+
+	sector = be64_to_cpu(p->sector);
+
+	spin_lock_irq(&mdev->req_lock);
+	req = _ar_id_to_req(mdev, p->block_id, sector);
+	spin_unlock_irq(&mdev->req_lock);
+	if (unlikely(!req)) {
+		dev_err(DEV, "Got a corrupt block_id/sector pair(1).\n");
+		return FALSE;
+	}
+
+	/* hlist_del(&req->colision) is done in _req_may_be_done, to avoid
+	 * special casing it there for the various failure cases.
+	 * still no race with drbd_fail_pending_reads */
+	ok = recv_dless_read(mdev, req, sector, data_size);
+
+	if (ok)
+		req_mod(req, data_received);
+	/* else: nothing. handled from drbd_disconnect...
+	 * I don't think we may complete this just yet
+	 * in case we are "on-disconnect: freeze" */
+
+	return ok;
+}
+
+static int receive_RSDataReply(struct drbd_conf *mdev, struct p_header *h)
+{
+	sector_t sector;
+	unsigned int header_size, data_size;
+	int ok;
+	struct p_data *p = (struct p_data *)h;
+
+	header_size = sizeof(*p) - sizeof(*h);
+	data_size   = h->length  - header_size;
+
+	ERR_IF(data_size == 0) return FALSE;
+
+	if (drbd_recv(mdev, h->payload, header_size) != header_size)
+		return FALSE;
+
+	sector = be64_to_cpu(p->sector);
+	D_ASSERT(p->block_id == ID_SYNCER);
+
+	if (get_ldev(mdev)) {
+		/* data is submitted to disk within recv_resync_read.
+		 * corresponding put_ldev done below on error,
+		 * or in drbd_endio_write_sec. */
+		ok = recv_resync_read(mdev, sector, data_size);
+	} else {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Can not write resync data to local disk.\n");
+
+		ok = drbd_drain_block(mdev, data_size);
+
+		drbd_send_ack_dp(mdev, P_NEG_ACK, p);
+	}
+
+	return ok;
+}
+
+/* e_end_block() is called via drbd_process_done_ee().
+ * this means this function only runs in the asender thread
+ */
+static int e_end_block(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
+	sector_t sector = e->sector;
+	struct drbd_epoch *epoch;
+	int ok = 1, pcmd;
+
+	if (e->flags & EE_IS_BARRIER) {
+		epoch = previous_epoch(mdev, e->epoch);
+		if (epoch)
+			drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0));
+	}
+
+	if (mdev->net_conf->wire_protocol == DRBD_PROT_C) {
+		if (likely(drbd_bio_uptodate(e->private_bio))) {
+			pcmd = (mdev->state.conn >= C_SYNC_SOURCE &&
+				mdev->state.conn <= C_PAUSED_SYNC_T &&
+				e->flags & EE_MAY_SET_IN_SYNC) ?
+				P_RS_WRITE_ACK : P_WRITE_ACK;
+			ok &= drbd_send_ack(mdev, pcmd, e);
+			if (pcmd == P_RS_WRITE_ACK)
+				drbd_set_in_sync(mdev, sector, e->size);
+		} else {
+			ok  = drbd_send_ack(mdev, P_NEG_ACK, e);
+			/* we expect it to be marked out of sync anyways...
+			 * maybe assert this?  */
+		}
+		dec_unacked(mdev);
+	}
+	/* we delete from the conflict detection hash _after_ we sent out the
+	 * P_WRITE_ACK / P_NEG_ACK, to get the sequence number right.  */
+	if (mdev->net_conf->two_primaries) {
+		spin_lock_irq(&mdev->req_lock);
+		D_ASSERT(!hlist_unhashed(&e->colision));
+		hlist_del_init(&e->colision);
+		spin_unlock_irq(&mdev->req_lock);
+	} else {
+		D_ASSERT(hlist_unhashed(&e->colision));
+	}
+
+	drbd_may_finish_epoch(mdev, e->epoch, EV_PUT + (cancel ? EV_CLEANUP : 0));
+
+	return ok;
+}
+
+static int e_send_discard_ack(struct drbd_conf *mdev, struct drbd_work *w, int unused)
+{
+	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
+	int ok = 1;
+
+	D_ASSERT(mdev->net_conf->wire_protocol == DRBD_PROT_C);
+	ok = drbd_send_ack(mdev, P_DISCARD_ACK, e);
+
+	spin_lock_irq(&mdev->req_lock);
+	D_ASSERT(!hlist_unhashed(&e->colision));
+	hlist_del_init(&e->colision);
+	spin_unlock_irq(&mdev->req_lock);
+
+	dec_unacked(mdev);
+
+	return ok;
+}
+
+/* Called from receive_Data.
+ * Synchronize packets on sock with packets on msock.
+ *
+ * This is here so even when a P_DATA packet traveling via sock overtook an Ack
+ * packet traveling on msock, they are still processed in the order they have
+ * been sent.
+ *
+ * Note: we don't care for Ack packets overtaking P_DATA packets.
+ *
+ * In case packet_seq is larger than mdev->peer_seq number, there are
+ * outstanding packets on the msock. We wait for them to arrive.
+ * In case we are the logically next packet, we update mdev->peer_seq
+ * ourselves. Correctly handles 32bit wrap around.
+ *
+ * Assume we have a 10 GBit connection, that is about 1<<30 byte per second,
+ * about 1<<21 sectors per second. So "worst" case, we have 1<<3 == 8 seconds
+ * for the 24bit wrap (historical atomic_t guarantee on some archs), and we have
+ * 1<<9 == 512 seconds aka ages for the 32bit wrap around...
+ *
+ * returns 0 if we may process the packet,
+ * -ERESTARTSYS if we were interrupted (by disconnect signal). */
+static int drbd_wait_peer_seq(struct drbd_conf *mdev, const u32 packet_seq)
+{
+	DEFINE_WAIT(wait);
+	unsigned int p_seq;
+	long timeout;
+	int ret = 0;
+	spin_lock(&mdev->peer_seq_lock);
+	for (;;) {
+		prepare_to_wait(&mdev->seq_wait, &wait, TASK_INTERRUPTIBLE);
+		if (seq_le(packet_seq, mdev->peer_seq+1))
+			break;
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+		p_seq = mdev->peer_seq;
+		spin_unlock(&mdev->peer_seq_lock);
+		timeout = schedule_timeout(30*HZ);
+		spin_lock(&mdev->peer_seq_lock);
+		if (timeout == 0 && p_seq == mdev->peer_seq) {
+			ret = -ETIMEDOUT;
+			dev_err(DEV, "ASSERT FAILED waited 30 seconds for sequence update, forcing reconnect\n");
+			break;
+		}
+	}
+	finish_wait(&mdev->seq_wait, &wait);
+	if (mdev->peer_seq+1 == packet_seq)
+		mdev->peer_seq++;
+	spin_unlock(&mdev->peer_seq_lock);
+	return ret;
+}
+
+/* mirrored write */
+static int receive_Data(struct drbd_conf *mdev, struct p_header *h)
+{
+	sector_t sector;
+	struct drbd_epoch_entry *e;
+	struct p_data *p = (struct p_data *)h;
+	int header_size, data_size;
+	int rw = WRITE;
+	u32 dp_flags;
+
+	header_size = sizeof(*p) - sizeof(*h);
+	data_size   = h->length  - header_size;
+
+	ERR_IF(data_size == 0) return FALSE;
+
+	if (drbd_recv(mdev, h->payload, header_size) != header_size)
+		return FALSE;
+
+	if (!get_ldev(mdev)) {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Can not write mirrored data block "
+			    "to local disk.\n");
+		spin_lock(&mdev->peer_seq_lock);
+		if (mdev->peer_seq+1 == be32_to_cpu(p->seq_num))
+			mdev->peer_seq++;
+		spin_unlock(&mdev->peer_seq_lock);
+
+		drbd_send_ack_dp(mdev, P_NEG_ACK, p);
+		atomic_inc(&mdev->current_epoch->epoch_size);
+		return drbd_drain_block(mdev, data_size);
+	}
+
+	/* get_ldev(mdev) successful.
+	 * Corresponding put_ldev done either below (on various errors),
+	 * or in drbd_endio_write_sec, if we successfully submit the data at
+	 * the end of this function. */
+
+	sector = be64_to_cpu(p->sector);
+	e = read_in_block(mdev, p->block_id, sector, data_size);
+	if (!e) {
+		put_ldev(mdev);
+		return FALSE;
+	}
+
+	e->private_bio->bi_end_io = drbd_endio_write_sec;
+	e->w.cb = e_end_block;
+
+	spin_lock(&mdev->epoch_lock);
+	e->epoch = mdev->current_epoch;
+	atomic_inc(&e->epoch->epoch_size);
+	atomic_inc(&e->epoch->active);
+
+	if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) {
+		struct drbd_epoch *epoch;
+		/* Issue a barrier if we start a new epoch, and the previous epoch
+		   was not a epoch containing a single request which already was
+		   a Barrier. */
+		epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
+		if (epoch == e->epoch) {
+			set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
+			rw |= (1<<BIO_RW_BARRIER);
+			e->flags |= EE_IS_BARRIER;
+		} else {
+			if (atomic_read(&epoch->epoch_size) > 1 ||
+			    !test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
+				set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
+				set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
+				rw |= (1<<BIO_RW_BARRIER);
+				e->flags |= EE_IS_BARRIER;
+			}
+		}
+	}
+	spin_unlock(&mdev->epoch_lock);
+
+	dp_flags = be32_to_cpu(p->dp_flags);
+	if (dp_flags & DP_HARDBARRIER) {
+		dev_err(DEV, "ASSERT FAILED would have submitted barrier request\n");
+		/* rw |= (1<<BIO_RW_BARRIER); */
+	}
+	if (dp_flags & DP_RW_SYNC)
+		rw |= (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG);
+	if (dp_flags & DP_MAY_SET_IN_SYNC)
+		e->flags |= EE_MAY_SET_IN_SYNC;
+
+	/* I'm the receiver, I do hold a net_cnt reference. */
+	if (!mdev->net_conf->two_primaries) {
+		spin_lock_irq(&mdev->req_lock);
+	} else {
+		/* don't get the req_lock yet,
+		 * we may sleep in drbd_wait_peer_seq */
+		const int size = e->size;
+		const int discard = test_bit(DISCARD_CONCURRENT, &mdev->flags);
+		DEFINE_WAIT(wait);
+		struct drbd_request *i;
+		struct hlist_node *n;
+		struct hlist_head *slot;
+		int first;
+
+		D_ASSERT(mdev->net_conf->wire_protocol == DRBD_PROT_C);
+		BUG_ON(mdev->ee_hash == NULL);
+		BUG_ON(mdev->tl_hash == NULL);
+
+		/* conflict detection and handling:
+		 * 1. wait on the sequence number,
+		 *    in case this data packet overtook ACK packets.
+		 * 2. check our hash tables for conflicting requests.
+		 *    we only need to walk the tl_hash, since an ee can not
+		 *    have a conflict with an other ee: on the submitting
+		 *    node, the corresponding req had already been conflicting,
+		 *    and a conflicting req is never sent.
+		 *
+		 * Note: for two_primaries, we are protocol C,
+		 * so there cannot be any request that is DONE
+		 * but still on the transfer log.
+		 *
+		 * unconditionally add to the ee_hash.
+		 *
+		 * if no conflicting request is found:
+		 *    submit.
+		 *
+		 * if any conflicting request is found
+		 * that has not yet been acked,
+		 * AND I have the "discard concurrent writes" flag:
+		 *	 queue (via done_ee) the P_DISCARD_ACK; OUT.
+		 *
+		 * if any conflicting request is found:
+		 *	 block the receiver, waiting on misc_wait
+		 *	 until no more conflicting requests are there,
+		 *	 or we get interrupted (disconnect).
+		 *
+		 *	 we do not just write after local io completion of those
+		 *	 requests, but only after req is done completely, i.e.
+		 *	 we wait for the P_DISCARD_ACK to arrive!
+		 *
+		 *	 then proceed normally, i.e. submit.
+		 */
+		if (drbd_wait_peer_seq(mdev, be32_to_cpu(p->seq_num)))
+			goto out_interrupted;
+
+		spin_lock_irq(&mdev->req_lock);
+
+		hlist_add_head(&e->colision, ee_hash_slot(mdev, sector));
+
+#define OVERLAPS overlaps(i->sector, i->size, sector, size)
+		slot = tl_hash_slot(mdev, sector);
+		first = 1;
+		for (;;) {
+			int have_unacked = 0;
+			int have_conflict = 0;
+			prepare_to_wait(&mdev->misc_wait, &wait,
+				TASK_INTERRUPTIBLE);
+			hlist_for_each_entry(i, n, slot, colision) {
+				if (OVERLAPS) {
+					/* only ALERT on first iteration,
+					 * we may be woken up early... */
+					if (first)
+						dev_alert(DEV, "%s[%u] Concurrent local write detected!"
+						      "	new: %llus +%u; pending: %llus +%u\n",
+						      current->comm, current->pid,
+						      (unsigned long long)sector, size,
+						      (unsigned long long)i->sector, i->size);
+					if (i->rq_state & RQ_NET_PENDING)
+						++have_unacked;
+					++have_conflict;
+				}
+			}
+#undef OVERLAPS
+			if (!have_conflict)
+				break;
+
+			/* Discard Ack only for the _first_ iteration */
+			if (first && discard && have_unacked) {
+				dev_alert(DEV, "Concurrent write! [DISCARD BY FLAG] sec=%llus\n",
+				     (unsigned long long)sector);
+				inc_unacked(mdev);
+				e->w.cb = e_send_discard_ack;
+				list_add_tail(&e->w.list, &mdev->done_ee);
+
+				spin_unlock_irq(&mdev->req_lock);
+
+				/* we could probably send that P_DISCARD_ACK ourselves,
+				 * but I don't like the receiver using the msock */
+
+				put_ldev(mdev);
+				wake_asender(mdev);
+				finish_wait(&mdev->misc_wait, &wait);
+				return TRUE;
+			}
+
+			if (signal_pending(current)) {
+				hlist_del_init(&e->colision);
+
+				spin_unlock_irq(&mdev->req_lock);
+
+				finish_wait(&mdev->misc_wait, &wait);
+				goto out_interrupted;
+			}
+
+			spin_unlock_irq(&mdev->req_lock);
+			if (first) {
+				first = 0;
+				dev_alert(DEV, "Concurrent write! [W AFTERWARDS] "
+				     "sec=%llus\n", (unsigned long long)sector);
+			} else if (discard) {
+				/* we had none on the first iteration.
+				 * there must be none now. */
+				D_ASSERT(have_unacked == 0);
+			}
+			schedule();
+			spin_lock_irq(&mdev->req_lock);
+		}
+		finish_wait(&mdev->misc_wait, &wait);
+	}
+
+	list_add(&e->w.list, &mdev->active_ee);
+	spin_unlock_irq(&mdev->req_lock);
+
+	switch (mdev->net_conf->wire_protocol) {
+	case DRBD_PROT_C:
+		inc_unacked(mdev);
+		/* corresponding dec_unacked() in e_end_block()
+		 * respective _drbd_clear_done_ee */
+		break;
+	case DRBD_PROT_B:
+		/* I really don't like it that the receiver thread
+		 * sends on the msock, but anyways */
+		drbd_send_ack(mdev, P_RECV_ACK, e);
+		break;
+	case DRBD_PROT_A:
+		/* nothing to do */
+		break;
+	}
+
+	if (mdev->state.pdsk == D_DISKLESS) {
+		/* In case we have the only disk of the cluster, */
+		drbd_set_out_of_sync(mdev, e->sector, e->size);
+		e->flags |= EE_CALL_AL_COMPLETE_IO;
+		drbd_al_begin_io(mdev, e->sector);
+	}
+
+	e->private_bio->bi_rw = rw;
+	drbd_generic_make_request(mdev, DRBD_FAULT_DT_WR, e->private_bio);
+	/* accounting done in endio */
+
+	maybe_kick_lo(mdev);
+	return TRUE;
+
+out_interrupted:
+	/* yes, the epoch_size now is imbalanced.
+	 * but we drop the connection anyways, so we don't have a chance to
+	 * receive a barrier... atomic_inc(&mdev->epoch_size); */
+	put_ldev(mdev);
+	drbd_free_ee(mdev, e);
+	return FALSE;
+}
+
+static int receive_DataRequest(struct drbd_conf *mdev, struct p_header *h)
+{
+	sector_t sector;
+	const sector_t capacity = drbd_get_capacity(mdev->this_bdev);
+	struct drbd_epoch_entry *e;
+	struct digest_info *di = NULL;
+	int size, digest_size;
+	unsigned int fault_type;
+	struct p_block_req *p =
+		(struct p_block_req *)h;
+	const int brps = sizeof(*p)-sizeof(*h);
+
+	if (drbd_recv(mdev, h->payload, brps) != brps)
+		return FALSE;
+
+	sector = be64_to_cpu(p->sector);
+	size   = be32_to_cpu(p->blksize);
+
+	if (size <= 0 || (size & 0x1ff) != 0 || size > DRBD_MAX_SEGMENT_SIZE) {
+		dev_err(DEV, "%s:%d: sector: %llus, size: %u\n", __FILE__, __LINE__,
+				(unsigned long long)sector, size);
+		return FALSE;
+	}
+	if (sector + (size>>9) > capacity) {
+		dev_err(DEV, "%s:%d: sector: %llus, size: %u\n", __FILE__, __LINE__,
+				(unsigned long long)sector, size);
+		return FALSE;
+	}
+
+	if (!get_ldev_if_state(mdev, D_UP_TO_DATE)) {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Can not satisfy peer's read request, "
+			    "no local data.\n");
+		drbd_send_ack_rp(mdev, h->command == P_DATA_REQUEST ? P_NEG_DREPLY :
+				 P_NEG_RS_DREPLY , p);
+		return TRUE;
+	}
+
+	/* GFP_NOIO, because we must not cause arbitrary write-out: in a DRBD
+	 * "criss-cross" setup, that might cause write-out on some other DRBD,
+	 * which in turn might block on the other node at this very place.  */
+	e = drbd_alloc_ee(mdev, p->block_id, sector, size, GFP_NOIO);
+	if (!e) {
+		put_ldev(mdev);
+		return FALSE;
+	}
+
+	e->private_bio->bi_rw = READ;
+	e->private_bio->bi_end_io = drbd_endio_read_sec;
+
+	switch (h->command) {
+	case P_DATA_REQUEST:
+		e->w.cb = w_e_end_data_req;
+		fault_type = DRBD_FAULT_DT_RD;
+		break;
+	case P_RS_DATA_REQUEST:
+		e->w.cb = w_e_end_rsdata_req;
+		fault_type = DRBD_FAULT_RS_RD;
+		/* Eventually this should become asynchronously. Currently it
+		 * blocks the whole receiver just to delay the reading of a
+		 * resync data block.
+		 * the drbd_work_queue mechanism is made for this...
+		 */
+		if (!drbd_rs_begin_io(mdev, sector)) {
+			/* we have been interrupted,
+			 * probably connection lost! */
+			D_ASSERT(signal_pending(current));
+			goto out_free_e;
+		}
+		break;
+
+	case P_OV_REPLY:
+	case P_CSUM_RS_REQUEST:
+		fault_type = DRBD_FAULT_RS_RD;
+		digest_size = h->length - brps ;
+		di = kmalloc(sizeof(*di) + digest_size, GFP_NOIO);
+		if (!di)
+			goto out_free_e;
+
+		di->digest_size = digest_size;
+		di->digest = (((char *)di)+sizeof(struct digest_info));
+
+		if (drbd_recv(mdev, di->digest, digest_size) != digest_size)
+			goto out_free_e;
+
+		e->block_id = (u64)(unsigned long)di;
+		if (h->command == P_CSUM_RS_REQUEST) {
+			D_ASSERT(mdev->agreed_pro_version >= 89);
+			e->w.cb = w_e_end_csum_rs_req;
+		} else if (h->command == P_OV_REPLY) {
+			e->w.cb = w_e_end_ov_reply;
+			dec_rs_pending(mdev);
+			break;
+		}
+
+		if (!drbd_rs_begin_io(mdev, sector)) {
+			/* we have been interrupted, probably connection lost! */
+			D_ASSERT(signal_pending(current));
+			goto out_free_e;
+		}
+		break;
+
+	case P_OV_REQUEST:
+		if (mdev->state.conn >= C_CONNECTED &&
+		    mdev->state.conn != C_VERIFY_T)
+			dev_warn(DEV, "ASSERT FAILED: got P_OV_REQUEST while being %s\n",
+				drbd_conn_str(mdev->state.conn));
+		if (mdev->ov_start_sector == ~(sector_t)0 &&
+		    mdev->agreed_pro_version >= 90) {
+			mdev->ov_start_sector = sector;
+			mdev->ov_position = sector;
+			mdev->ov_left = mdev->rs_total - BM_SECT_TO_BIT(sector);
+			dev_info(DEV, "Online Verify start sector: %llu\n",
+					(unsigned long long)sector);
+		}
+		e->w.cb = w_e_end_ov_req;
+		fault_type = DRBD_FAULT_RS_RD;
+		/* Eventually this should become asynchronous. Currently it
+		 * blocks the whole receiver just to delay the reading of a
+		 * resync data block.
+		 * the drbd_work_queue mechanism is made for this...
+		 */
+		if (!drbd_rs_begin_io(mdev, sector)) {
+			/* we have been interrupted,
+			 * probably connection lost! */
+			D_ASSERT(signal_pending(current));
+			goto out_free_e;
+		}
+		break;
+
+
+	default:
+		dev_err(DEV, "unexpected command (%s) in receive_DataRequest\n",
+		    cmdname(h->command));
+		fault_type = DRBD_FAULT_MAX;
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+	list_add(&e->w.list, &mdev->read_ee);
+	spin_unlock_irq(&mdev->req_lock);
+
+	inc_unacked(mdev);
+
+	drbd_generic_make_request(mdev, fault_type, e->private_bio);
+	maybe_kick_lo(mdev);
+
+	return TRUE;
+
+out_free_e:
+	kfree(di);
+	put_ldev(mdev);
+	drbd_free_ee(mdev, e);
+	return FALSE;
+}
+
+static int drbd_asb_recover_0p(struct drbd_conf *mdev) __must_hold(local)
+{
+	int self, peer, rv = -100;
+	unsigned long ch_self, ch_peer;
+
+	self = mdev->ldev->md.uuid[UI_BITMAP] & 1;
+	peer = mdev->p_uuid[UI_BITMAP] & 1;
+
+	ch_peer = mdev->p_uuid[UI_SIZE];
+	ch_self = mdev->comm_bm_set;
+
+	switch (mdev->net_conf->after_sb_0p) {
+	case ASB_CONSENSUS:
+	case ASB_DISCARD_SECONDARY:
+	case ASB_CALL_HELPER:
+		dev_err(DEV, "Configuration error.\n");
+		break;
+	case ASB_DISCONNECT:
+		break;
+	case ASB_DISCARD_YOUNGER_PRI:
+		if (self == 0 && peer == 1) {
+			rv = -1;
+			break;
+		}
+		if (self == 1 && peer == 0) {
+			rv =  1;
+			break;
+		}
+		/* Else fall through to one of the other strategies... */
+	case ASB_DISCARD_OLDER_PRI:
+		if (self == 0 && peer == 1) {
+			rv = 1;
+			break;
+		}
+		if (self == 1 && peer == 0) {
+			rv = -1;
+			break;
+		}
+		/* Else fall through to one of the other strategies... */
+		dev_warn(DEV, "Discard younger/older primary did not find a decision\n"
+		     "Using discard-least-changes instead\n");
+	case ASB_DISCARD_ZERO_CHG:
+		if (ch_peer == 0 && ch_self == 0) {
+			rv = test_bit(DISCARD_CONCURRENT, &mdev->flags)
+				? -1 : 1;
+			break;
+		} else {
+			if (ch_peer == 0) { rv =  1; break; }
+			if (ch_self == 0) { rv = -1; break; }
+		}
+		if (mdev->net_conf->after_sb_0p == ASB_DISCARD_ZERO_CHG)
+			break;
+	case ASB_DISCARD_LEAST_CHG:
+		if	(ch_self < ch_peer)
+			rv = -1;
+		else if (ch_self > ch_peer)
+			rv =  1;
+		else /* ( ch_self == ch_peer ) */
+		     /* Well, then use something else. */
+			rv = test_bit(DISCARD_CONCURRENT, &mdev->flags)
+				? -1 : 1;
+		break;
+	case ASB_DISCARD_LOCAL:
+		rv = -1;
+		break;
+	case ASB_DISCARD_REMOTE:
+		rv =  1;
+	}
+
+	return rv;
+}
+
+static int drbd_asb_recover_1p(struct drbd_conf *mdev) __must_hold(local)
+{
+	int self, peer, hg, rv = -100;
+
+	self = mdev->ldev->md.uuid[UI_BITMAP] & 1;
+	peer = mdev->p_uuid[UI_BITMAP] & 1;
+
+	switch (mdev->net_conf->after_sb_1p) {
+	case ASB_DISCARD_YOUNGER_PRI:
+	case ASB_DISCARD_OLDER_PRI:
+	case ASB_DISCARD_LEAST_CHG:
+	case ASB_DISCARD_LOCAL:
+	case ASB_DISCARD_REMOTE:
+		dev_err(DEV, "Configuration error.\n");
+		break;
+	case ASB_DISCONNECT:
+		break;
+	case ASB_CONSENSUS:
+		hg = drbd_asb_recover_0p(mdev);
+		if (hg == -1 && mdev->state.role == R_SECONDARY)
+			rv = hg;
+		if (hg == 1  && mdev->state.role == R_PRIMARY)
+			rv = hg;
+		break;
+	case ASB_VIOLENTLY:
+		rv = drbd_asb_recover_0p(mdev);
+		break;
+	case ASB_DISCARD_SECONDARY:
+		return mdev->state.role == R_PRIMARY ? 1 : -1;
+	case ASB_CALL_HELPER:
+		hg = drbd_asb_recover_0p(mdev);
+		if (hg == -1 && mdev->state.role == R_PRIMARY) {
+			self = drbd_set_role(mdev, R_SECONDARY, 0);
+			 /* drbd_change_state() does not sleep while in SS_IN_TRANSIENT_STATE,
+			  * we might be here in C_WF_REPORT_PARAMS which is transient.
+			  * we do not need to wait for the after state change work either. */
+			self = drbd_change_state(mdev, CS_VERBOSE, NS(role, R_SECONDARY));
+			if (self != SS_SUCCESS) {
+				drbd_khelper(mdev, "pri-lost-after-sb");
+			} else {
+				dev_warn(DEV, "Successfully gave up primary role.\n");
+				rv = hg;
+			}
+		} else
+			rv = hg;
+	}
+
+	return rv;
+}
+
+static int drbd_asb_recover_2p(struct drbd_conf *mdev) __must_hold(local)
+{
+	int self, peer, hg, rv = -100;
+
+	self = mdev->ldev->md.uuid[UI_BITMAP] & 1;
+	peer = mdev->p_uuid[UI_BITMAP] & 1;
+
+	switch (mdev->net_conf->after_sb_2p) {
+	case ASB_DISCARD_YOUNGER_PRI:
+	case ASB_DISCARD_OLDER_PRI:
+	case ASB_DISCARD_LEAST_CHG:
+	case ASB_DISCARD_LOCAL:
+	case ASB_DISCARD_REMOTE:
+	case ASB_CONSENSUS:
+	case ASB_DISCARD_SECONDARY:
+		dev_err(DEV, "Configuration error.\n");
+		break;
+	case ASB_VIOLENTLY:
+		rv = drbd_asb_recover_0p(mdev);
+		break;
+	case ASB_DISCONNECT:
+		break;
+	case ASB_CALL_HELPER:
+		hg = drbd_asb_recover_0p(mdev);
+		if (hg == -1) {
+			 /* drbd_change_state() does not sleep while in SS_IN_TRANSIENT_STATE,
+			  * we might be here in C_WF_REPORT_PARAMS which is transient.
+			  * we do not need to wait for the after state change work either. */
+			self = drbd_change_state(mdev, CS_VERBOSE, NS(role, R_SECONDARY));
+			if (self != SS_SUCCESS) {
+				drbd_khelper(mdev, "pri-lost-after-sb");
+			} else {
+				dev_warn(DEV, "Successfully gave up primary role.\n");
+				rv = hg;
+			}
+		} else
+			rv = hg;
+	}
+
+	return rv;
+}
+
+static void drbd_uuid_dump(struct drbd_conf *mdev, char *text, u64 *uuid,
+			   u64 bits, u64 flags)
+{
+	if (!uuid) {
+		dev_info(DEV, "%s uuid info vanished while I was looking!\n", text);
+		return;
+	}
+	dev_info(DEV, "%s %016llX:%016llX:%016llX:%016llX bits:%llu flags:%llX\n",
+	     text,
+	     (unsigned long long)uuid[UI_CURRENT],
+	     (unsigned long long)uuid[UI_BITMAP],
+	     (unsigned long long)uuid[UI_HISTORY_START],
+	     (unsigned long long)uuid[UI_HISTORY_END],
+	     (unsigned long long)bits,
+	     (unsigned long long)flags);
+}
+
+/*
+  100	after split brain try auto recover
+    2	C_SYNC_SOURCE set BitMap
+    1	C_SYNC_SOURCE use BitMap
+    0	no Sync
+   -1	C_SYNC_TARGET use BitMap
+   -2	C_SYNC_TARGET set BitMap
+ -100	after split brain, disconnect
+-1000	unrelated data
+ */
+static int drbd_uuid_compare(struct drbd_conf *mdev, int *rule_nr) __must_hold(local)
+{
+	u64 self, peer;
+	int i, j;
+
+	self = mdev->ldev->md.uuid[UI_CURRENT] & ~((u64)1);
+	peer = mdev->p_uuid[UI_CURRENT] & ~((u64)1);
+
+	*rule_nr = 10;
+	if (self == UUID_JUST_CREATED && peer == UUID_JUST_CREATED)
+		return 0;
+
+	*rule_nr = 20;
+	if ((self == UUID_JUST_CREATED || self == (u64)0) &&
+	     peer != UUID_JUST_CREATED)
+		return -2;
+
+	*rule_nr = 30;
+	if (self != UUID_JUST_CREATED &&
+	    (peer == UUID_JUST_CREATED || peer == (u64)0))
+		return 2;
+
+	if (self == peer) {
+		int rct, dc; /* roles at crash time */
+
+		if (mdev->p_uuid[UI_BITMAP] == (u64)0 && mdev->ldev->md.uuid[UI_BITMAP] != (u64)0) {
+
+			if (mdev->agreed_pro_version < 91)
+				return -1001;
+
+			if ((mdev->ldev->md.uuid[UI_BITMAP] & ~((u64)1)) == (mdev->p_uuid[UI_HISTORY_START] & ~((u64)1)) &&
+			    (mdev->ldev->md.uuid[UI_HISTORY_START] & ~((u64)1)) == (mdev->p_uuid[UI_HISTORY_START + 1] & ~((u64)1))) {
+				dev_info(DEV, "was SyncSource, missed the resync finished event, corrected myself:\n");
+				drbd_uuid_set_bm(mdev, 0UL);
+
+				drbd_uuid_dump(mdev, "self", mdev->ldev->md.uuid,
+					       mdev->state.disk >= D_NEGOTIATING ? drbd_bm_total_weight(mdev) : 0, 0);
+				*rule_nr = 34;
+			} else {
+				dev_info(DEV, "was SyncSource (peer failed to write sync_uuid)\n");
+				*rule_nr = 36;
+			}
+
+			return 1;
+		}
+
+		if (mdev->ldev->md.uuid[UI_BITMAP] == (u64)0 && mdev->p_uuid[UI_BITMAP] != (u64)0) {
+
+			if (mdev->agreed_pro_version < 91)
+				return -1001;
+
+			if ((mdev->ldev->md.uuid[UI_HISTORY_START] & ~((u64)1)) == (mdev->p_uuid[UI_BITMAP] & ~((u64)1)) &&
+			    (mdev->ldev->md.uuid[UI_HISTORY_START + 1] & ~((u64)1)) == (mdev->p_uuid[UI_HISTORY_START] & ~((u64)1))) {
+				dev_info(DEV, "was SyncTarget, peer missed the resync finished event, corrected peer:\n");
+
+				mdev->p_uuid[UI_HISTORY_START + 1] = mdev->p_uuid[UI_HISTORY_START];
+				mdev->p_uuid[UI_HISTORY_START] = mdev->p_uuid[UI_BITMAP];
+				mdev->p_uuid[UI_BITMAP] = 0UL;
+
+				drbd_uuid_dump(mdev, "peer", mdev->p_uuid, mdev->p_uuid[UI_SIZE], mdev->p_uuid[UI_FLAGS]);
+				*rule_nr = 35;
+			} else {
+				dev_info(DEV, "was SyncTarget (failed to write sync_uuid)\n");
+				*rule_nr = 37;
+			}
+
+			return -1;
+		}
+
+		/* Common power [off|failure] */
+		rct = (test_bit(CRASHED_PRIMARY, &mdev->flags) ? 1 : 0) +
+			(mdev->p_uuid[UI_FLAGS] & 2);
+		/* lowest bit is set when we were primary,
+		 * next bit (weight 2) is set when peer was primary */
+		*rule_nr = 40;
+
+		switch (rct) {
+		case 0: /* !self_pri && !peer_pri */ return 0;
+		case 1: /*  self_pri && !peer_pri */ return 1;
+		case 2: /* !self_pri &&  peer_pri */ return -1;
+		case 3: /*  self_pri &&  peer_pri */
+			dc = test_bit(DISCARD_CONCURRENT, &mdev->flags);
+			return dc ? -1 : 1;
+		}
+	}
+
+	*rule_nr = 50;
+	peer = mdev->p_uuid[UI_BITMAP] & ~((u64)1);
+	if (self == peer)
+		return -1;
+
+	*rule_nr = 51;
+	peer = mdev->p_uuid[UI_HISTORY_START] & ~((u64)1);
+	if (self == peer) {
+		self = mdev->ldev->md.uuid[UI_HISTORY_START] & ~((u64)1);
+		peer = mdev->p_uuid[UI_HISTORY_START + 1] & ~((u64)1);
+		if (self == peer) {
+			/* The last P_SYNC_UUID did not get though. Undo the last start of
+			   resync as sync source modifications of the peer's UUIDs. */
+
+			if (mdev->agreed_pro_version < 91)
+				return -1001;
+
+			mdev->p_uuid[UI_BITMAP] = mdev->p_uuid[UI_HISTORY_START];
+			mdev->p_uuid[UI_HISTORY_START] = mdev->p_uuid[UI_HISTORY_START + 1];
+			return -1;
+		}
+	}
+
+	*rule_nr = 60;
+	self = mdev->ldev->md.uuid[UI_CURRENT] & ~((u64)1);
+	for (i = UI_HISTORY_START; i <= UI_HISTORY_END; i++) {
+		peer = mdev->p_uuid[i] & ~((u64)1);
+		if (self == peer)
+			return -2;
+	}
+
+	*rule_nr = 70;
+	self = mdev->ldev->md.uuid[UI_BITMAP] & ~((u64)1);
+	peer = mdev->p_uuid[UI_CURRENT] & ~((u64)1);
+	if (self == peer)
+		return 1;
+
+	*rule_nr = 71;
+	self = mdev->ldev->md.uuid[UI_HISTORY_START] & ~((u64)1);
+	if (self == peer) {
+		self = mdev->ldev->md.uuid[UI_HISTORY_START + 1] & ~((u64)1);
+		peer = mdev->p_uuid[UI_HISTORY_START] & ~((u64)1);
+		if (self == peer) {
+			/* The last P_SYNC_UUID did not get though. Undo the last start of
+			   resync as sync source modifications of our UUIDs. */
+
+			if (mdev->agreed_pro_version < 91)
+				return -1001;
+
+			_drbd_uuid_set(mdev, UI_BITMAP, mdev->ldev->md.uuid[UI_HISTORY_START]);
+			_drbd_uuid_set(mdev, UI_HISTORY_START, mdev->ldev->md.uuid[UI_HISTORY_START + 1]);
+
+			dev_info(DEV, "Undid last start of resync:\n");
+
+			drbd_uuid_dump(mdev, "self", mdev->ldev->md.uuid,
+				       mdev->state.disk >= D_NEGOTIATING ? drbd_bm_total_weight(mdev) : 0, 0);
+
+			return 1;
+		}
+	}
+
+
+	*rule_nr = 80;
+	peer = mdev->p_uuid[UI_CURRENT] & ~((u64)1);
+	for (i = UI_HISTORY_START; i <= UI_HISTORY_END; i++) {
+		self = mdev->ldev->md.uuid[i] & ~((u64)1);
+		if (self == peer)
+			return 2;
+	}
+
+	*rule_nr = 90;
+	self = mdev->ldev->md.uuid[UI_BITMAP] & ~((u64)1);
+	peer = mdev->p_uuid[UI_BITMAP] & ~((u64)1);
+	if (self == peer && self != ((u64)0))
+		return 100;
+
+	*rule_nr = 100;
+	for (i = UI_HISTORY_START; i <= UI_HISTORY_END; i++) {
+		self = mdev->ldev->md.uuid[i] & ~((u64)1);
+		for (j = UI_HISTORY_START; j <= UI_HISTORY_END; j++) {
+			peer = mdev->p_uuid[j] & ~((u64)1);
+			if (self == peer)
+				return -100;
+		}
+	}
+
+	return -1000;
+}
+
+/* drbd_sync_handshake() returns the new conn state on success, or
+   CONN_MASK (-1) on failure.
+ */
+static enum drbd_conns drbd_sync_handshake(struct drbd_conf *mdev, enum drbd_role peer_role,
+					   enum drbd_disk_state peer_disk) __must_hold(local)
+{
+	int hg, rule_nr;
+	enum drbd_conns rv = C_MASK;
+	enum drbd_disk_state mydisk;
+
+	mydisk = mdev->state.disk;
+	if (mydisk == D_NEGOTIATING)
+		mydisk = mdev->new_state_tmp.disk;
+
+	dev_info(DEV, "drbd_sync_handshake:\n");
+	drbd_uuid_dump(mdev, "self", mdev->ldev->md.uuid, mdev->comm_bm_set, 0);
+	drbd_uuid_dump(mdev, "peer", mdev->p_uuid,
+		       mdev->p_uuid[UI_SIZE], mdev->p_uuid[UI_FLAGS]);
+
+	hg = drbd_uuid_compare(mdev, &rule_nr);
+
+	dev_info(DEV, "uuid_compare()=%d by rule %d\n", hg, rule_nr);
+
+	if (hg == -1000) {
+		dev_alert(DEV, "Unrelated data, aborting!\n");
+		return C_MASK;
+	}
+	if (hg == -1001) {
+		dev_alert(DEV, "To resolve this both sides have to support at least protocol\n");
+		return C_MASK;
+	}
+
+	if    ((mydisk == D_INCONSISTENT && peer_disk > D_INCONSISTENT) ||
+	    (peer_disk == D_INCONSISTENT && mydisk    > D_INCONSISTENT)) {
+		int f = (hg == -100) || abs(hg) == 2;
+		hg = mydisk > D_INCONSISTENT ? 1 : -1;
+		if (f)
+			hg = hg*2;
+		dev_info(DEV, "Becoming sync %s due to disk states.\n",
+		     hg > 0 ? "source" : "target");
+	}
+
+	if (hg == 100 || (hg == -100 && mdev->net_conf->always_asbp)) {
+		int pcount = (mdev->state.role == R_PRIMARY)
+			   + (peer_role == R_PRIMARY);
+		int forced = (hg == -100);
+
+		switch (pcount) {
+		case 0:
+			hg = drbd_asb_recover_0p(mdev);
+			break;
+		case 1:
+			hg = drbd_asb_recover_1p(mdev);
+			break;
+		case 2:
+			hg = drbd_asb_recover_2p(mdev);
+			break;
+		}
+		if (abs(hg) < 100) {
+			dev_warn(DEV, "Split-Brain detected, %d primaries, "
+			     "automatically solved. Sync from %s node\n",
+			     pcount, (hg < 0) ? "peer" : "this");
+			if (forced) {
+				dev_warn(DEV, "Doing a full sync, since"
+				     " UUIDs where ambiguous.\n");
+				hg = hg*2;
+			}
+		}
+	}
+
+	if (hg == -100) {
+		if (mdev->net_conf->want_lose && !(mdev->p_uuid[UI_FLAGS]&1))
+			hg = -1;
+		if (!mdev->net_conf->want_lose && (mdev->p_uuid[UI_FLAGS]&1))
+			hg = 1;
+
+		if (abs(hg) < 100)
+			dev_warn(DEV, "Split-Brain detected, manually solved. "
+			     "Sync from %s node\n",
+			     (hg < 0) ? "peer" : "this");
+	}
+
+	if (hg == -100) {
+		dev_alert(DEV, "Split-Brain detected, dropping connection!\n");
+		drbd_khelper(mdev, "split-brain");
+		return C_MASK;
+	}
+
+	if (hg > 0 && mydisk <= D_INCONSISTENT) {
+		dev_err(DEV, "I shall become SyncSource, but I am inconsistent!\n");
+		return C_MASK;
+	}
+
+	if (hg < 0 && /* by intention we do not use mydisk here. */
+	    mdev->state.role == R_PRIMARY && mdev->state.disk >= D_CONSISTENT) {
+		switch (mdev->net_conf->rr_conflict) {
+		case ASB_CALL_HELPER:
+			drbd_khelper(mdev, "pri-lost");
+			/* fall through */
+		case ASB_DISCONNECT:
+			dev_err(DEV, "I shall become SyncTarget, but I am primary!\n");
+			return C_MASK;
+		case ASB_VIOLENTLY:
+			dev_warn(DEV, "Becoming SyncTarget, violating the stable-data"
+			     "assumption\n");
+		}
+	}
+
+	if (abs(hg) >= 2) {
+		dev_info(DEV, "Writing the whole bitmap, full sync required after drbd_sync_handshake.\n");
+		if (drbd_bitmap_io(mdev, &drbd_bmio_set_n_write, "set_n_write from sync_handshake"))
+			return C_MASK;
+	}
+
+	if (hg > 0) { /* become sync source. */
+		rv = C_WF_BITMAP_S;
+	} else if (hg < 0) { /* become sync target */
+		rv = C_WF_BITMAP_T;
+	} else {
+		rv = C_CONNECTED;
+		if (drbd_bm_total_weight(mdev)) {
+			dev_info(DEV, "No resync, but %lu bits in bitmap!\n",
+			     drbd_bm_total_weight(mdev));
+		}
+	}
+
+	return rv;
+}
+
+/* returns 1 if invalid */
+static int cmp_after_sb(enum drbd_after_sb_p peer, enum drbd_after_sb_p self)
+{
+	/* ASB_DISCARD_REMOTE - ASB_DISCARD_LOCAL is valid */
+	if ((peer == ASB_DISCARD_REMOTE && self == ASB_DISCARD_LOCAL) ||
+	    (self == ASB_DISCARD_REMOTE && peer == ASB_DISCARD_LOCAL))
+		return 0;
+
+	/* any other things with ASB_DISCARD_REMOTE or ASB_DISCARD_LOCAL are invalid */
+	if (peer == ASB_DISCARD_REMOTE || peer == ASB_DISCARD_LOCAL ||
+	    self == ASB_DISCARD_REMOTE || self == ASB_DISCARD_LOCAL)
+		return 1;
+
+	/* everything else is valid if they are equal on both sides. */
+	if (peer == self)
+		return 0;
+
+	/* everything es is invalid. */
+	return 1;
+}
+
+static int receive_protocol(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_protocol *p = (struct p_protocol *)h;
+	int header_size, data_size;
+	int p_proto, p_after_sb_0p, p_after_sb_1p, p_after_sb_2p;
+	int p_want_lose, p_two_primaries;
+	char p_integrity_alg[SHARED_SECRET_MAX] = "";
+
+	header_size = sizeof(*p) - sizeof(*h);
+	data_size   = h->length  - header_size;
+
+	if (drbd_recv(mdev, h->payload, header_size) != header_size)
+		return FALSE;
+
+	p_proto		= be32_to_cpu(p->protocol);
+	p_after_sb_0p	= be32_to_cpu(p->after_sb_0p);
+	p_after_sb_1p	= be32_to_cpu(p->after_sb_1p);
+	p_after_sb_2p	= be32_to_cpu(p->after_sb_2p);
+	p_want_lose	= be32_to_cpu(p->want_lose);
+	p_two_primaries = be32_to_cpu(p->two_primaries);
+
+	if (p_proto != mdev->net_conf->wire_protocol) {
+		dev_err(DEV, "incompatible communication protocols\n");
+		goto disconnect;
+	}
+
+	if (cmp_after_sb(p_after_sb_0p, mdev->net_conf->after_sb_0p)) {
+		dev_err(DEV, "incompatible after-sb-0pri settings\n");
+		goto disconnect;
+	}
+
+	if (cmp_after_sb(p_after_sb_1p, mdev->net_conf->after_sb_1p)) {
+		dev_err(DEV, "incompatible after-sb-1pri settings\n");
+		goto disconnect;
+	}
+
+	if (cmp_after_sb(p_after_sb_2p, mdev->net_conf->after_sb_2p)) {
+		dev_err(DEV, "incompatible after-sb-2pri settings\n");
+		goto disconnect;
+	}
+
+	if (p_want_lose && mdev->net_conf->want_lose) {
+		dev_err(DEV, "both sides have the 'want_lose' flag set\n");
+		goto disconnect;
+	}
+
+	if (p_two_primaries != mdev->net_conf->two_primaries) {
+		dev_err(DEV, "incompatible setting of the two-primaries options\n");
+		goto disconnect;
+	}
+
+	if (mdev->agreed_pro_version >= 87) {
+		unsigned char *my_alg = mdev->net_conf->integrity_alg;
+
+		if (drbd_recv(mdev, p_integrity_alg, data_size) != data_size)
+			return FALSE;
+
+		p_integrity_alg[SHARED_SECRET_MAX-1] = 0;
+		if (strcmp(p_integrity_alg, my_alg)) {
+			dev_err(DEV, "incompatible setting of the data-integrity-alg\n");
+			goto disconnect;
+		}
+		dev_info(DEV, "data-integrity-alg: %s\n",
+		     my_alg[0] ? my_alg : (unsigned char *)"<not-used>");
+	}
+
+	return TRUE;
+
+disconnect:
+	drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+	return FALSE;
+}
+
+/* helper function
+ * input: alg name, feature name
+ * return: NULL (alg name was "")
+ *         ERR_PTR(error) if something goes wrong
+ *         or the crypto hash ptr, if it worked out ok. */
+struct crypto_hash *drbd_crypto_alloc_digest_safe(const struct drbd_conf *mdev,
+		const char *alg, const char *name)
+{
+	struct crypto_hash *tfm;
+
+	if (!alg[0])
+		return NULL;
+
+	tfm = crypto_alloc_hash(alg, 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(tfm)) {
+		dev_err(DEV, "Can not allocate \"%s\" as %s (reason: %ld)\n",
+			alg, name, PTR_ERR(tfm));
+		return tfm;
+	}
+	if (!drbd_crypto_is_hash(crypto_hash_tfm(tfm))) {
+		crypto_free_hash(tfm);
+		dev_err(DEV, "\"%s\" is not a digest (%s)\n", alg, name);
+		return ERR_PTR(-EINVAL);
+	}
+	return tfm;
+}
+
+static int receive_SyncParam(struct drbd_conf *mdev, struct p_header *h)
+{
+	int ok = TRUE;
+	struct p_rs_param_89 *p = (struct p_rs_param_89 *)h;
+	unsigned int header_size, data_size, exp_max_sz;
+	struct crypto_hash *verify_tfm = NULL;
+	struct crypto_hash *csums_tfm = NULL;
+	const int apv = mdev->agreed_pro_version;
+
+	exp_max_sz  = apv <= 87 ? sizeof(struct p_rs_param)
+		    : apv == 88 ? sizeof(struct p_rs_param)
+					+ SHARED_SECRET_MAX
+		    : /* 89 */    sizeof(struct p_rs_param_89);
+
+	if (h->length > exp_max_sz) {
+		dev_err(DEV, "SyncParam packet too long: received %u, expected <= %u bytes\n",
+		    h->length, exp_max_sz);
+		return FALSE;
+	}
+
+	if (apv <= 88) {
+		header_size = sizeof(struct p_rs_param) - sizeof(*h);
+		data_size   = h->length  - header_size;
+	} else /* apv >= 89 */ {
+		header_size = sizeof(struct p_rs_param_89) - sizeof(*h);
+		data_size   = h->length  - header_size;
+		D_ASSERT(data_size == 0);
+	}
+
+	/* initialize verify_alg and csums_alg */
+	memset(p->verify_alg, 0, 2 * SHARED_SECRET_MAX);
+
+	if (drbd_recv(mdev, h->payload, header_size) != header_size)
+		return FALSE;
+
+	mdev->sync_conf.rate	  = be32_to_cpu(p->rate);
+
+	if (apv >= 88) {
+		if (apv == 88) {
+			if (data_size > SHARED_SECRET_MAX) {
+				dev_err(DEV, "verify-alg too long, "
+				    "peer wants %u, accepting only %u byte\n",
+						data_size, SHARED_SECRET_MAX);
+				return FALSE;
+			}
+
+			if (drbd_recv(mdev, p->verify_alg, data_size) != data_size)
+				return FALSE;
+
+			/* we expect NUL terminated string */
+			/* but just in case someone tries to be evil */
+			D_ASSERT(p->verify_alg[data_size-1] == 0);
+			p->verify_alg[data_size-1] = 0;
+
+		} else /* apv >= 89 */ {
+			/* we still expect NUL terminated strings */
+			/* but just in case someone tries to be evil */
+			D_ASSERT(p->verify_alg[SHARED_SECRET_MAX-1] == 0);
+			D_ASSERT(p->csums_alg[SHARED_SECRET_MAX-1] == 0);
+			p->verify_alg[SHARED_SECRET_MAX-1] = 0;
+			p->csums_alg[SHARED_SECRET_MAX-1] = 0;
+		}
+
+		if (strcmp(mdev->sync_conf.verify_alg, p->verify_alg)) {
+			if (mdev->state.conn == C_WF_REPORT_PARAMS) {
+				dev_err(DEV, "Different verify-alg settings. me=\"%s\" peer=\"%s\"\n",
+				    mdev->sync_conf.verify_alg, p->verify_alg);
+				goto disconnect;
+			}
+			verify_tfm = drbd_crypto_alloc_digest_safe(mdev,
+					p->verify_alg, "verify-alg");
+			if (IS_ERR(verify_tfm)) {
+				verify_tfm = NULL;
+				goto disconnect;
+			}
+		}
+
+		if (apv >= 89 && strcmp(mdev->sync_conf.csums_alg, p->csums_alg)) {
+			if (mdev->state.conn == C_WF_REPORT_PARAMS) {
+				dev_err(DEV, "Different csums-alg settings. me=\"%s\" peer=\"%s\"\n",
+				    mdev->sync_conf.csums_alg, p->csums_alg);
+				goto disconnect;
+			}
+			csums_tfm = drbd_crypto_alloc_digest_safe(mdev,
+					p->csums_alg, "csums-alg");
+			if (IS_ERR(csums_tfm)) {
+				csums_tfm = NULL;
+				goto disconnect;
+			}
+		}
+
+
+		spin_lock(&mdev->peer_seq_lock);
+		/* lock against drbd_nl_syncer_conf() */
+		if (verify_tfm) {
+			strcpy(mdev->sync_conf.verify_alg, p->verify_alg);
+			mdev->sync_conf.verify_alg_len = strlen(p->verify_alg) + 1;
+			crypto_free_hash(mdev->verify_tfm);
+			mdev->verify_tfm = verify_tfm;
+			dev_info(DEV, "using verify-alg: \"%s\"\n", p->verify_alg);
+		}
+		if (csums_tfm) {
+			strcpy(mdev->sync_conf.csums_alg, p->csums_alg);
+			mdev->sync_conf.csums_alg_len = strlen(p->csums_alg) + 1;
+			crypto_free_hash(mdev->csums_tfm);
+			mdev->csums_tfm = csums_tfm;
+			dev_info(DEV, "using csums-alg: \"%s\"\n", p->csums_alg);
+		}
+		spin_unlock(&mdev->peer_seq_lock);
+	}
+
+	return ok;
+disconnect:
+	/* just for completeness: actually not needed,
+	 * as this is not reached if csums_tfm was ok. */
+	crypto_free_hash(csums_tfm);
+	/* but free the verify_tfm again, if csums_tfm did not work out */
+	crypto_free_hash(verify_tfm);
+	drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+	return FALSE;
+}
+
+static void drbd_setup_order_type(struct drbd_conf *mdev, int peer)
+{
+	/* sorry, we currently have no working implementation
+	 * of distributed TCQ */
+}
+
+/* warn if the arguments differ by more than 12.5% */
+static void warn_if_differ_considerably(struct drbd_conf *mdev,
+	const char *s, sector_t a, sector_t b)
+{
+	sector_t d;
+	if (a == 0 || b == 0)
+		return;
+	d = (a > b) ? (a - b) : (b - a);
+	if (d > (a>>3) || d > (b>>3))
+		dev_warn(DEV, "Considerable difference in %s: %llus vs. %llus\n", s,
+		     (unsigned long long)a, (unsigned long long)b);
+}
+
+static int receive_sizes(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_sizes *p = (struct p_sizes *)h;
+	enum determine_dev_size dd = unchanged;
+	unsigned int max_seg_s;
+	sector_t p_size, p_usize, my_usize;
+	int ldsc = 0; /* local disk size changed */
+	enum drbd_conns nconn;
+
+	ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
+	if (drbd_recv(mdev, h->payload, h->length) != h->length)
+		return FALSE;
+
+	p_size = be64_to_cpu(p->d_size);
+	p_usize = be64_to_cpu(p->u_size);
+
+	if (p_size == 0 && mdev->state.disk == D_DISKLESS) {
+		dev_err(DEV, "some backing storage is needed\n");
+		drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+		return FALSE;
+	}
+
+	/* just store the peer's disk size for now.
+	 * we still need to figure out whether we accept that. */
+	mdev->p_size = p_size;
+
+#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
+	if (get_ldev(mdev)) {
+		warn_if_differ_considerably(mdev, "lower level device sizes",
+			   p_size, drbd_get_max_capacity(mdev->ldev));
+		warn_if_differ_considerably(mdev, "user requested size",
+					    p_usize, mdev->ldev->dc.disk_size);
+
+		/* if this is the first connect, or an otherwise expected
+		 * param exchange, choose the minimum */
+		if (mdev->state.conn == C_WF_REPORT_PARAMS)
+			p_usize = min_not_zero((sector_t)mdev->ldev->dc.disk_size,
+					     p_usize);
+
+		my_usize = mdev->ldev->dc.disk_size;
+
+		if (mdev->ldev->dc.disk_size != p_usize) {
+			mdev->ldev->dc.disk_size = p_usize;
+			dev_info(DEV, "Peer sets u_size to %lu sectors\n",
+			     (unsigned long)mdev->ldev->dc.disk_size);
+		}
+
+		/* Never shrink a device with usable data during connect.
+		   But allow online shrinking if we are connected. */
+		if (drbd_new_dev_size(mdev, mdev->ldev) <
+		   drbd_get_capacity(mdev->this_bdev) &&
+		   mdev->state.disk >= D_OUTDATED &&
+		   mdev->state.conn < C_CONNECTED) {
+			dev_err(DEV, "The peer's disk size is too small!\n");
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+			mdev->ldev->dc.disk_size = my_usize;
+			put_ldev(mdev);
+			return FALSE;
+		}
+		put_ldev(mdev);
+	}
+#undef min_not_zero
+
+	if (get_ldev(mdev)) {
+		dd = drbd_determin_dev_size(mdev);
+		put_ldev(mdev);
+		if (dd == dev_size_error)
+			return FALSE;
+		drbd_md_sync(mdev);
+	} else {
+		/* I am diskless, need to accept the peer's size. */
+		drbd_set_my_capacity(mdev, p_size);
+	}
+
+	if (mdev->p_uuid && mdev->state.conn <= C_CONNECTED && get_ldev(mdev)) {
+		nconn = drbd_sync_handshake(mdev,
+				mdev->state.peer, mdev->state.pdsk);
+		put_ldev(mdev);
+
+		if (nconn == C_MASK) {
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+			return FALSE;
+		}
+
+		if (drbd_request_state(mdev, NS(conn, nconn)) < SS_SUCCESS) {
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+			return FALSE;
+		}
+	}
+
+	if (get_ldev(mdev)) {
+		if (mdev->ldev->known_size != drbd_get_capacity(mdev->ldev->backing_bdev)) {
+			mdev->ldev->known_size = drbd_get_capacity(mdev->ldev->backing_bdev);
+			ldsc = 1;
+		}
+
+		max_seg_s = be32_to_cpu(p->max_segment_size);
+		if (max_seg_s != queue_max_segment_size(mdev->rq_queue))
+			drbd_setup_queue_param(mdev, max_seg_s);
+
+		drbd_setup_order_type(mdev, be32_to_cpu(p->queue_order_type));
+		put_ldev(mdev);
+	}
+
+	if (mdev->state.conn > C_WF_REPORT_PARAMS) {
+		if (be64_to_cpu(p->c_size) !=
+		    drbd_get_capacity(mdev->this_bdev) || ldsc) {
+			/* we have different sizes, probably peer
+			 * needs to know my new size... */
+			drbd_send_sizes(mdev, 0);
+		}
+		if (test_and_clear_bit(RESIZE_PENDING, &mdev->flags) ||
+		    (dd == grew && mdev->state.conn == C_CONNECTED)) {
+			if (mdev->state.pdsk >= D_INCONSISTENT &&
+			    mdev->state.disk >= D_INCONSISTENT)
+				resync_after_online_grow(mdev);
+			else
+				set_bit(RESYNC_AFTER_NEG, &mdev->flags);
+		}
+	}
+
+	return TRUE;
+}
+
+static int receive_uuids(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_uuids *p = (struct p_uuids *)h;
+	u64 *p_uuid;
+	int i;
+
+	ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
+	if (drbd_recv(mdev, h->payload, h->length) != h->length)
+		return FALSE;
+
+	p_uuid = kmalloc(sizeof(u64)*UI_EXTENDED_SIZE, GFP_NOIO);
+
+	for (i = UI_CURRENT; i < UI_EXTENDED_SIZE; i++)
+		p_uuid[i] = be64_to_cpu(p->uuid[i]);
+
+	kfree(mdev->p_uuid);
+	mdev->p_uuid = p_uuid;
+
+	if (mdev->state.conn < C_CONNECTED &&
+	    mdev->state.disk < D_INCONSISTENT &&
+	    mdev->state.role == R_PRIMARY &&
+	    (mdev->ed_uuid & ~((u64)1)) != (p_uuid[UI_CURRENT] & ~((u64)1))) {
+		dev_err(DEV, "Can only connect to data with current UUID=%016llX\n",
+		    (unsigned long long)mdev->ed_uuid);
+		drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+		return FALSE;
+	}
+
+	if (get_ldev(mdev)) {
+		int skip_initial_sync =
+			mdev->state.conn == C_CONNECTED &&
+			mdev->agreed_pro_version >= 90 &&
+			mdev->ldev->md.uuid[UI_CURRENT] == UUID_JUST_CREATED &&
+			(p_uuid[UI_FLAGS] & 8);
+		if (skip_initial_sync) {
+			dev_info(DEV, "Accepted new current UUID, preparing to skip initial sync\n");
+			drbd_bitmap_io(mdev, &drbd_bmio_clear_n_write,
+					"clear_n_write from receive_uuids");
+			_drbd_uuid_set(mdev, UI_CURRENT, p_uuid[UI_CURRENT]);
+			_drbd_uuid_set(mdev, UI_BITMAP, 0);
+			_drbd_set_state(_NS2(mdev, disk, D_UP_TO_DATE, pdsk, D_UP_TO_DATE),
+					CS_VERBOSE, NULL);
+			drbd_md_sync(mdev);
+		}
+		put_ldev(mdev);
+	}
+
+	/* Before we test for the disk state, we should wait until an eventually
+	   ongoing cluster wide state change is finished. That is important if
+	   we are primary and are detaching from our disk. We need to see the
+	   new disk state... */
+	wait_event(mdev->misc_wait, !test_bit(CLUSTER_ST_CHANGE, &mdev->flags));
+	if (mdev->state.conn >= C_CONNECTED && mdev->state.disk < D_INCONSISTENT)
+		drbd_set_ed_uuid(mdev, p_uuid[UI_CURRENT]);
+
+	return TRUE;
+}
+
+/**
+ * convert_state() - Converts the peer's view of the cluster state to our point of view
+ * @ps:		The state as seen by the peer.
+ */
+static union drbd_state convert_state(union drbd_state ps)
+{
+	union drbd_state ms;
+
+	static enum drbd_conns c_tab[] = {
+		[C_CONNECTED] = C_CONNECTED,
+
+		[C_STARTING_SYNC_S] = C_STARTING_SYNC_T,
+		[C_STARTING_SYNC_T] = C_STARTING_SYNC_S,
+		[C_DISCONNECTING] = C_TEAR_DOWN, /* C_NETWORK_FAILURE, */
+		[C_VERIFY_S]       = C_VERIFY_T,
+		[C_MASK]   = C_MASK,
+	};
+
+	ms.i = ps.i;
+
+	ms.conn = c_tab[ps.conn];
+	ms.peer = ps.role;
+	ms.role = ps.peer;
+	ms.pdsk = ps.disk;
+	ms.disk = ps.pdsk;
+	ms.peer_isp = (ps.aftr_isp | ps.user_isp);
+
+	return ms;
+}
+
+static int receive_req_state(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_req_state *p = (struct p_req_state *)h;
+	union drbd_state mask, val;
+	int rv;
+
+	ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
+	if (drbd_recv(mdev, h->payload, h->length) != h->length)
+		return FALSE;
+
+	mask.i = be32_to_cpu(p->mask);
+	val.i = be32_to_cpu(p->val);
+
+	if (test_bit(DISCARD_CONCURRENT, &mdev->flags) &&
+	    test_bit(CLUSTER_ST_CHANGE, &mdev->flags)) {
+		drbd_send_sr_reply(mdev, SS_CONCURRENT_ST_CHG);
+		return TRUE;
+	}
+
+	mask = convert_state(mask);
+	val = convert_state(val);
+
+	rv = drbd_change_state(mdev, CS_VERBOSE, mask, val);
+
+	drbd_send_sr_reply(mdev, rv);
+	drbd_md_sync(mdev);
+
+	return TRUE;
+}
+
+static int receive_state(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_state *p = (struct p_state *)h;
+	enum drbd_conns nconn, oconn;
+	union drbd_state ns, peer_state;
+	enum drbd_disk_state real_peer_disk;
+	int rv;
+
+	ERR_IF(h->length != (sizeof(*p)-sizeof(*h)))
+		return FALSE;
+
+	if (drbd_recv(mdev, h->payload, h->length) != h->length)
+		return FALSE;
+
+	peer_state.i = be32_to_cpu(p->state);
+
+	real_peer_disk = peer_state.disk;
+	if (peer_state.disk == D_NEGOTIATING) {
+		real_peer_disk = mdev->p_uuid[UI_FLAGS] & 4 ? D_INCONSISTENT : D_CONSISTENT;
+		dev_info(DEV, "real peer disk state = %s\n", drbd_disk_str(real_peer_disk));
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+ retry:
+	oconn = nconn = mdev->state.conn;
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (nconn == C_WF_REPORT_PARAMS)
+		nconn = C_CONNECTED;
+
+	if (mdev->p_uuid && peer_state.disk >= D_NEGOTIATING &&
+	    get_ldev_if_state(mdev, D_NEGOTIATING)) {
+		int cr; /* consider resync */
+
+		/* if we established a new connection */
+		cr  = (oconn < C_CONNECTED);
+		/* if we had an established connection
+		 * and one of the nodes newly attaches a disk */
+		cr |= (oconn == C_CONNECTED &&
+		       (peer_state.disk == D_NEGOTIATING ||
+			mdev->state.disk == D_NEGOTIATING));
+		/* if we have both been inconsistent, and the peer has been
+		 * forced to be UpToDate with --overwrite-data */
+		cr |= test_bit(CONSIDER_RESYNC, &mdev->flags);
+		/* if we had been plain connected, and the admin requested to
+		 * start a sync by "invalidate" or "invalidate-remote" */
+		cr |= (oconn == C_CONNECTED &&
+				(peer_state.conn >= C_STARTING_SYNC_S &&
+				 peer_state.conn <= C_WF_BITMAP_T));
+
+		if (cr)
+			nconn = drbd_sync_handshake(mdev, peer_state.role, real_peer_disk);
+
+		put_ldev(mdev);
+		if (nconn == C_MASK) {
+			if (mdev->state.disk == D_NEGOTIATING) {
+				drbd_force_state(mdev, NS(disk, D_DISKLESS));
+				nconn = C_CONNECTED;
+			} else if (peer_state.disk == D_NEGOTIATING) {
+				dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
+				peer_state.disk = D_DISKLESS;
+			} else {
+				D_ASSERT(oconn == C_WF_REPORT_PARAMS);
+				drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+				return FALSE;
+			}
+		}
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+	if (mdev->state.conn != oconn)
+		goto retry;
+	clear_bit(CONSIDER_RESYNC, &mdev->flags);
+	ns.i = mdev->state.i;
+	ns.conn = nconn;
+	ns.peer = peer_state.role;
+	ns.pdsk = real_peer_disk;
+	ns.peer_isp = (peer_state.aftr_isp | peer_state.user_isp);
+	if ((nconn == C_CONNECTED || nconn == C_WF_BITMAP_S) && ns.disk == D_NEGOTIATING)
+		ns.disk = mdev->new_state_tmp.disk;
+
+	rv = _drbd_set_state(mdev, ns, CS_VERBOSE | CS_HARD, NULL);
+	ns = mdev->state;
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (rv < SS_SUCCESS) {
+		drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+		return FALSE;
+	}
+
+	if (oconn > C_WF_REPORT_PARAMS) {
+		if (nconn > C_CONNECTED && peer_state.conn <= C_CONNECTED &&
+		    peer_state.disk != D_NEGOTIATING ) {
+			/* we want resync, peer has not yet decided to sync... */
+			/* Nowadays only used when forcing a node into primary role and
+			   setting its disk to UpToDate with that */
+			drbd_send_uuids(mdev);
+			drbd_send_state(mdev);
+		}
+	}
+
+	mdev->net_conf->want_lose = 0;
+
+	drbd_md_sync(mdev); /* update connected indicator, la_size, ... */
+
+	return TRUE;
+}
+
+static int receive_sync_uuid(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_rs_uuid *p = (struct p_rs_uuid *)h;
+
+	wait_event(mdev->misc_wait,
+		   mdev->state.conn == C_WF_SYNC_UUID ||
+		   mdev->state.conn < C_CONNECTED ||
+		   mdev->state.disk < D_NEGOTIATING);
+
+	/* D_ASSERT( mdev->state.conn == C_WF_SYNC_UUID ); */
+
+	ERR_IF(h->length != (sizeof(*p)-sizeof(*h))) return FALSE;
+	if (drbd_recv(mdev, h->payload, h->length) != h->length)
+		return FALSE;
+
+	/* Here the _drbd_uuid_ functions are right, current should
+	   _not_ be rotated into the history */
+	if (get_ldev_if_state(mdev, D_NEGOTIATING)) {
+		_drbd_uuid_set(mdev, UI_CURRENT, be64_to_cpu(p->uuid));
+		_drbd_uuid_set(mdev, UI_BITMAP, 0UL);
+
+		drbd_start_resync(mdev, C_SYNC_TARGET);
+
+		put_ldev(mdev);
+	} else
+		dev_err(DEV, "Ignoring SyncUUID packet!\n");
+
+	return TRUE;
+}
+
+enum receive_bitmap_ret { OK, DONE, FAILED };
+
+static enum receive_bitmap_ret
+receive_bitmap_plain(struct drbd_conf *mdev, struct p_header *h,
+	unsigned long *buffer, struct bm_xfer_ctx *c)
+{
+	unsigned num_words = min_t(size_t, BM_PACKET_WORDS, c->bm_words - c->word_offset);
+	unsigned want = num_words * sizeof(long);
+
+	if (want != h->length) {
+		dev_err(DEV, "%s:want (%u) != h->length (%u)\n", __func__, want, h->length);
+		return FAILED;
+	}
+	if (want == 0)
+		return DONE;
+	if (drbd_recv(mdev, buffer, want) != want)
+		return FAILED;
+
+	drbd_bm_merge_lel(mdev, c->word_offset, num_words, buffer);
+
+	c->word_offset += num_words;
+	c->bit_offset = c->word_offset * BITS_PER_LONG;
+	if (c->bit_offset > c->bm_bits)
+		c->bit_offset = c->bm_bits;
+
+	return OK;
+}
+
+static enum receive_bitmap_ret
+recv_bm_rle_bits(struct drbd_conf *mdev,
+		struct p_compressed_bm *p,
+		struct bm_xfer_ctx *c)
+{
+	struct bitstream bs;
+	u64 look_ahead;
+	u64 rl;
+	u64 tmp;
+	unsigned long s = c->bit_offset;
+	unsigned long e;
+	int len = p->head.length - (sizeof(*p) - sizeof(p->head));
+	int toggle = DCBP_get_start(p);
+	int have;
+	int bits;
+
+	bitstream_init(&bs, p->code, len, DCBP_get_pad_bits(p));
+
+	bits = bitstream_get_bits(&bs, &look_ahead, 64);
+	if (bits < 0)
+		return FAILED;
+
+	for (have = bits; have > 0; s += rl, toggle = !toggle) {
+		bits = vli_decode_bits(&rl, look_ahead);
+		if (bits <= 0)
+			return FAILED;
+
+		if (toggle) {
+			e = s + rl -1;
+			if (e >= c->bm_bits) {
+				dev_err(DEV, "bitmap overflow (e:%lu) while decoding bm RLE packet\n", e);
+				return FAILED;
+			}
+			_drbd_bm_set_bits(mdev, s, e);
+		}
+
+		if (have < bits) {
+			dev_err(DEV, "bitmap decoding error: h:%d b:%d la:0x%08llx l:%u/%u\n",
+				have, bits, look_ahead,
+				(unsigned int)(bs.cur.b - p->code),
+				(unsigned int)bs.buf_len);
+			return FAILED;
+		}
+		look_ahead >>= bits;
+		have -= bits;
+
+		bits = bitstream_get_bits(&bs, &tmp, 64 - have);
+		if (bits < 0)
+			return FAILED;
+		look_ahead |= tmp << have;
+		have += bits;
+	}
+
+	c->bit_offset = s;
+	bm_xfer_ctx_bit_to_word_offset(c);
+
+	return (s == c->bm_bits) ? DONE : OK;
+}
+
+static enum receive_bitmap_ret
+decode_bitmap_c(struct drbd_conf *mdev,
+		struct p_compressed_bm *p,
+		struct bm_xfer_ctx *c)
+{
+	if (DCBP_get_code(p) == RLE_VLI_Bits)
+		return recv_bm_rle_bits(mdev, p, c);
+
+	/* other variants had been implemented for evaluation,
+	 * but have been dropped as this one turned out to be "best"
+	 * during all our tests. */
+
+	dev_err(DEV, "receive_bitmap_c: unknown encoding %u\n", p->encoding);
+	drbd_force_state(mdev, NS(conn, C_PROTOCOL_ERROR));
+	return FAILED;
+}
+
+void INFO_bm_xfer_stats(struct drbd_conf *mdev,
+		const char *direction, struct bm_xfer_ctx *c)
+{
+	/* what would it take to transfer it "plaintext" */
+	unsigned plain = sizeof(struct p_header) *
+		((c->bm_words+BM_PACKET_WORDS-1)/BM_PACKET_WORDS+1)
+		+ c->bm_words * sizeof(long);
+	unsigned total = c->bytes[0] + c->bytes[1];
+	unsigned r;
+
+	/* total can not be zero. but just in case: */
+	if (total == 0)
+		return;
+
+	/* don't report if not compressed */
+	if (total >= plain)
+		return;
+
+	/* total < plain. check for overflow, still */
+	r = (total > UINT_MAX/1000) ? (total / (plain/1000))
+		                    : (1000 * total / plain);
+
+	if (r > 1000)
+		r = 1000;
+
+	r = 1000 - r;
+	dev_info(DEV, "%s bitmap stats [Bytes(packets)]: plain %u(%u), RLE %u(%u), "
+	     "total %u; compression: %u.%u%%\n",
+			direction,
+			c->bytes[1], c->packets[1],
+			c->bytes[0], c->packets[0],
+			total, r/10, r % 10);
+}
+
+/* Since we are processing the bitfield from lower addresses to higher,
+   it does not matter if the process it in 32 bit chunks or 64 bit
+   chunks as long as it is little endian. (Understand it as byte stream,
+   beginning with the lowest byte...) If we would use big endian
+   we would need to process it from the highest address to the lowest,
+   in order to be agnostic to the 32 vs 64 bits issue.
+
+   returns 0 on failure, 1 if we successfully received it. */
+static int receive_bitmap(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct bm_xfer_ctx c;
+	void *buffer;
+	enum receive_bitmap_ret ret;
+	int ok = FALSE;
+
+	wait_event(mdev->misc_wait, !atomic_read(&mdev->ap_bio_cnt));
+
+	drbd_bm_lock(mdev, "receive bitmap");
+
+	/* maybe we should use some per thread scratch page,
+	 * and allocate that during initial device creation? */
+	buffer	 = (unsigned long *) __get_free_page(GFP_NOIO);
+	if (!buffer) {
+		dev_err(DEV, "failed to allocate one page buffer in %s\n", __func__);
+		goto out;
+	}
+
+	c = (struct bm_xfer_ctx) {
+		.bm_bits = drbd_bm_bits(mdev),
+		.bm_words = drbd_bm_words(mdev),
+	};
+
+	do {
+		if (h->command == P_BITMAP) {
+			ret = receive_bitmap_plain(mdev, h, buffer, &c);
+		} else if (h->command == P_COMPRESSED_BITMAP) {
+			/* MAYBE: sanity check that we speak proto >= 90,
+			 * and the feature is enabled! */
+			struct p_compressed_bm *p;
+
+			if (h->length > BM_PACKET_PAYLOAD_BYTES) {
+				dev_err(DEV, "ReportCBitmap packet too large\n");
+				goto out;
+			}
+			/* use the page buff */
+			p = buffer;
+			memcpy(p, h, sizeof(*h));
+			if (drbd_recv(mdev, p->head.payload, h->length) != h->length)
+				goto out;
+			if (p->head.length <= (sizeof(*p) - sizeof(p->head))) {
+				dev_err(DEV, "ReportCBitmap packet too small (l:%u)\n", p->head.length);
+				return FAILED;
+			}
+			ret = decode_bitmap_c(mdev, p, &c);
+		} else {
+			dev_warn(DEV, "receive_bitmap: h->command neither ReportBitMap nor ReportCBitMap (is 0x%x)", h->command);
+			goto out;
+		}
+
+		c.packets[h->command == P_BITMAP]++;
+		c.bytes[h->command == P_BITMAP] += sizeof(struct p_header) + h->length;
+
+		if (ret != OK)
+			break;
+
+		if (!drbd_recv_header(mdev, h))
+			goto out;
+	} while (ret == OK);
+	if (ret == FAILED)
+		goto out;
+
+	INFO_bm_xfer_stats(mdev, "receive", &c);
+
+	if (mdev->state.conn == C_WF_BITMAP_T) {
+		ok = !drbd_send_bitmap(mdev);
+		if (!ok)
+			goto out;
+		/* Omit CS_ORDERED with this state transition to avoid deadlocks. */
+		ok = _drbd_request_state(mdev, NS(conn, C_WF_SYNC_UUID), CS_VERBOSE);
+		D_ASSERT(ok == SS_SUCCESS);
+	} else if (mdev->state.conn != C_WF_BITMAP_S) {
+		/* admin may have requested C_DISCONNECTING,
+		 * other threads may have noticed network errors */
+		dev_info(DEV, "unexpected cstate (%s) in receive_bitmap\n",
+		    drbd_conn_str(mdev->state.conn));
+	}
+
+	ok = TRUE;
+ out:
+	drbd_bm_unlock(mdev);
+	if (ok && mdev->state.conn == C_WF_BITMAP_S)
+		drbd_start_resync(mdev, C_SYNC_SOURCE);
+	free_page((unsigned long) buffer);
+	return ok;
+}
+
+static int receive_skip(struct drbd_conf *mdev, struct p_header *h)
+{
+	/* TODO zero copy sink :) */
+	static char sink[128];
+	int size, want, r;
+
+	dev_warn(DEV, "skipping unknown optional packet type %d, l: %d!\n",
+	     h->command, h->length);
+
+	size = h->length;
+	while (size > 0) {
+		want = min_t(int, size, sizeof(sink));
+		r = drbd_recv(mdev, sink, want);
+		ERR_IF(r <= 0) break;
+		size -= r;
+	}
+	return size == 0;
+}
+
+static int receive_UnplugRemote(struct drbd_conf *mdev, struct p_header *h)
+{
+	if (mdev->state.disk >= D_INCONSISTENT)
+		drbd_kick_lo(mdev);
+
+	/* Make sure we've acked all the TCP data associated
+	 * with the data requests being unplugged */
+	drbd_tcp_quickack(mdev->data.socket);
+
+	return TRUE;
+}
+
+typedef int (*drbd_cmd_handler_f)(struct drbd_conf *, struct p_header *);
+
+static drbd_cmd_handler_f drbd_default_handler[] = {
+	[P_DATA]	    = receive_Data,
+	[P_DATA_REPLY]	    = receive_DataReply,
+	[P_RS_DATA_REPLY]   = receive_RSDataReply,
+	[P_BARRIER]	    = receive_Barrier,
+	[P_BITMAP]	    = receive_bitmap,
+	[P_COMPRESSED_BITMAP]    = receive_bitmap,
+	[P_UNPLUG_REMOTE]   = receive_UnplugRemote,
+	[P_DATA_REQUEST]    = receive_DataRequest,
+	[P_RS_DATA_REQUEST] = receive_DataRequest,
+	[P_SYNC_PARAM]	    = receive_SyncParam,
+	[P_SYNC_PARAM89]	   = receive_SyncParam,
+	[P_PROTOCOL]        = receive_protocol,
+	[P_UUIDS]	    = receive_uuids,
+	[P_SIZES]	    = receive_sizes,
+	[P_STATE]	    = receive_state,
+	[P_STATE_CHG_REQ]   = receive_req_state,
+	[P_SYNC_UUID]       = receive_sync_uuid,
+	[P_OV_REQUEST]      = receive_DataRequest,
+	[P_OV_REPLY]        = receive_DataRequest,
+	[P_CSUM_RS_REQUEST]    = receive_DataRequest,
+	/* anything missing from this table is in
+	 * the asender_tbl, see get_asender_cmd */
+	[P_MAX_CMD]	    = NULL,
+};
+
+static drbd_cmd_handler_f *drbd_cmd_handler = drbd_default_handler;
+static drbd_cmd_handler_f *drbd_opt_cmd_handler;
+
+static void drbdd(struct drbd_conf *mdev)
+{
+	drbd_cmd_handler_f handler;
+	struct p_header *header = &mdev->data.rbuf.header;
+
+	while (get_t_state(&mdev->receiver) == Running) {
+		drbd_thread_current_set_cpu(mdev);
+		if (!drbd_recv_header(mdev, header)) {
+			drbd_force_state(mdev, NS(conn, C_PROTOCOL_ERROR));
+			break;
+		}
+
+		if (header->command < P_MAX_CMD)
+			handler = drbd_cmd_handler[header->command];
+		else if (P_MAY_IGNORE < header->command
+		     && header->command < P_MAX_OPT_CMD)
+			handler = drbd_opt_cmd_handler[header->command-P_MAY_IGNORE];
+		else if (header->command > P_MAX_OPT_CMD)
+			handler = receive_skip;
+		else
+			handler = NULL;
+
+		if (unlikely(!handler)) {
+			dev_err(DEV, "unknown packet type %d, l: %d!\n",
+			    header->command, header->length);
+			drbd_force_state(mdev, NS(conn, C_PROTOCOL_ERROR));
+			break;
+		}
+		if (unlikely(!handler(mdev, header))) {
+			dev_err(DEV, "error receiving %s, l: %d!\n",
+			    cmdname(header->command), header->length);
+			drbd_force_state(mdev, NS(conn, C_PROTOCOL_ERROR));
+			break;
+		}
+	}
+}
+
+static void drbd_fail_pending_reads(struct drbd_conf *mdev)
+{
+	struct hlist_head *slot;
+	struct hlist_node *pos;
+	struct hlist_node *tmp;
+	struct drbd_request *req;
+	int i;
+
+	/*
+	 * Application READ requests
+	 */
+	spin_lock_irq(&mdev->req_lock);
+	for (i = 0; i < APP_R_HSIZE; i++) {
+		slot = mdev->app_reads_hash+i;
+		hlist_for_each_entry_safe(req, pos, tmp, slot, colision) {
+			/* it may (but should not any longer!)
+			 * be on the work queue; if that assert triggers,
+			 * we need to also grab the
+			 * spin_lock_irq(&mdev->data.work.q_lock);
+			 * and list_del_init here. */
+			D_ASSERT(list_empty(&req->w.list));
+			/* It would be nice to complete outside of spinlock.
+			 * But this is easier for now. */
+			_req_mod(req, connection_lost_while_pending);
+		}
+	}
+	for (i = 0; i < APP_R_HSIZE; i++)
+		if (!hlist_empty(mdev->app_reads_hash+i))
+			dev_warn(DEV, "ASSERT FAILED: app_reads_hash[%d].first: "
+				"%p, should be NULL\n", i, mdev->app_reads_hash[i].first);
+
+	memset(mdev->app_reads_hash, 0, APP_R_HSIZE*sizeof(void *));
+	spin_unlock_irq(&mdev->req_lock);
+}
+
+void drbd_flush_workqueue(struct drbd_conf *mdev)
+{
+	struct drbd_wq_barrier barr;
+
+	barr.w.cb = w_prev_work_done;
+	init_completion(&barr.done);
+	drbd_queue_work(&mdev->data.work, &barr.w);
+	wait_for_completion(&barr.done);
+}
+
+static void drbd_disconnect(struct drbd_conf *mdev)
+{
+	enum drbd_fencing_p fp;
+	union drbd_state os, ns;
+	int rv = SS_UNKNOWN_ERROR;
+	unsigned int i;
+
+	if (mdev->state.conn == C_STANDALONE)
+		return;
+	if (mdev->state.conn >= C_WF_CONNECTION)
+		dev_err(DEV, "ASSERT FAILED cstate = %s, expected < WFConnection\n",
+				drbd_conn_str(mdev->state.conn));
+
+	/* asender does not clean up anything. it must not interfere, either */
+	drbd_thread_stop(&mdev->asender);
+
+	mutex_lock(&mdev->data.mutex);
+	drbd_free_sock(mdev);
+	mutex_unlock(&mdev->data.mutex);
+
+	spin_lock_irq(&mdev->req_lock);
+	_drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
+	_drbd_wait_ee_list_empty(mdev, &mdev->sync_ee);
+	_drbd_wait_ee_list_empty(mdev, &mdev->read_ee);
+	spin_unlock_irq(&mdev->req_lock);
+
+	/* We do not have data structures that would allow us to
+	 * get the rs_pending_cnt down to 0 again.
+	 *  * On C_SYNC_TARGET we do not have any data structures describing
+	 *    the pending RSDataRequest's we have sent.
+	 *  * On C_SYNC_SOURCE there is no data structure that tracks
+	 *    the P_RS_DATA_REPLY blocks that we sent to the SyncTarget.
+	 *  And no, it is not the sum of the reference counts in the
+	 *  resync_LRU. The resync_LRU tracks the whole operation including
+	 *  the disk-IO, while the rs_pending_cnt only tracks the blocks
+	 *  on the fly. */
+	drbd_rs_cancel_all(mdev);
+	mdev->rs_total = 0;
+	mdev->rs_failed = 0;
+	atomic_set(&mdev->rs_pending_cnt, 0);
+	wake_up(&mdev->misc_wait);
+
+	/* make sure syncer is stopped and w_resume_next_sg queued */
+	del_timer_sync(&mdev->resync_timer);
+	set_bit(STOP_SYNC_TIMER, &mdev->flags);
+	resync_timer_fn((unsigned long)mdev);
+
+	/* wait for all w_e_end_data_req, w_e_end_rsdata_req, w_send_barrier,
+	 * w_make_resync_request etc. which may still be on the worker queue
+	 * to be "canceled" */
+	drbd_flush_workqueue(mdev);
+
+	/* This also does reclaim_net_ee().  If we do this too early, we might
+	 * miss some resync ee and pages.*/
+	drbd_process_done_ee(mdev);
+
+	kfree(mdev->p_uuid);
+	mdev->p_uuid = NULL;
+
+	if (!mdev->state.susp)
+		tl_clear(mdev);
+
+	drbd_fail_pending_reads(mdev);
+
+	dev_info(DEV, "Connection closed\n");
+
+	drbd_md_sync(mdev);
+
+	fp = FP_DONT_CARE;
+	if (get_ldev(mdev)) {
+		fp = mdev->ldev->dc.fencing;
+		put_ldev(mdev);
+	}
+
+	if (mdev->state.role == R_PRIMARY) {
+		if (fp >= FP_RESOURCE && mdev->state.pdsk >= D_UNKNOWN) {
+			enum drbd_disk_state nps = drbd_try_outdate_peer(mdev);
+			drbd_request_state(mdev, NS(pdsk, nps));
+		}
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+	os = mdev->state;
+	if (os.conn >= C_UNCONNECTED) {
+		/* Do not restart in case we are C_DISCONNECTING */
+		ns = os;
+		ns.conn = C_UNCONNECTED;
+		rv = _drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
+	}
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (os.conn == C_DISCONNECTING) {
+		struct hlist_head *h;
+		wait_event(mdev->misc_wait, atomic_read(&mdev->net_cnt) == 0);
+
+		/* we must not free the tl_hash
+		 * while application io is still on the fly */
+		wait_event(mdev->misc_wait, atomic_read(&mdev->ap_bio_cnt) == 0);
+
+		spin_lock_irq(&mdev->req_lock);
+		/* paranoia code */
+		for (h = mdev->ee_hash; h < mdev->ee_hash + mdev->ee_hash_s; h++)
+			if (h->first)
+				dev_err(DEV, "ASSERT FAILED ee_hash[%u].first == %p, expected NULL\n",
+						(int)(h - mdev->ee_hash), h->first);
+		kfree(mdev->ee_hash);
+		mdev->ee_hash = NULL;
+		mdev->ee_hash_s = 0;
+
+		/* paranoia code */
+		for (h = mdev->tl_hash; h < mdev->tl_hash + mdev->tl_hash_s; h++)
+			if (h->first)
+				dev_err(DEV, "ASSERT FAILED tl_hash[%u] == %p, expected NULL\n",
+						(int)(h - mdev->tl_hash), h->first);
+		kfree(mdev->tl_hash);
+		mdev->tl_hash = NULL;
+		mdev->tl_hash_s = 0;
+		spin_unlock_irq(&mdev->req_lock);
+
+		crypto_free_hash(mdev->cram_hmac_tfm);
+		mdev->cram_hmac_tfm = NULL;
+
+		kfree(mdev->net_conf);
+		mdev->net_conf = NULL;
+		drbd_request_state(mdev, NS(conn, C_STANDALONE));
+	}
+
+	/* tcp_close and release of sendpage pages can be deferred.  I don't
+	 * want to use SO_LINGER, because apparently it can be deferred for
+	 * more than 20 seconds (longest time I checked).
+	 *
+	 * Actually we don't care for exactly when the network stack does its
+	 * put_page(), but release our reference on these pages right here.
+	 */
+	i = drbd_release_ee(mdev, &mdev->net_ee);
+	if (i)
+		dev_info(DEV, "net_ee not empty, killed %u entries\n", i);
+	i = atomic_read(&mdev->pp_in_use);
+	if (i)
+		dev_info(DEV, "pp_in_use = %u, expected 0\n", i);
+
+	D_ASSERT(list_empty(&mdev->read_ee));
+	D_ASSERT(list_empty(&mdev->active_ee));
+	D_ASSERT(list_empty(&mdev->sync_ee));
+	D_ASSERT(list_empty(&mdev->done_ee));
+
+	/* ok, no more ee's on the fly, it is safe to reset the epoch_size */
+	atomic_set(&mdev->current_epoch->epoch_size, 0);
+	D_ASSERT(list_empty(&mdev->current_epoch->list));
+}
+
+/*
+ * We support PRO_VERSION_MIN to PRO_VERSION_MAX. The protocol version
+ * we can agree on is stored in agreed_pro_version.
+ *
+ * feature flags and the reserved array should be enough room for future
+ * enhancements of the handshake protocol, and possible plugins...
+ *
+ * for now, they are expected to be zero, but ignored.
+ */
+static int drbd_send_handshake(struct drbd_conf *mdev)
+{
+	/* ASSERT current == mdev->receiver ... */
+	struct p_handshake *p = &mdev->data.sbuf.handshake;
+	int ok;
+
+	if (mutex_lock_interruptible(&mdev->data.mutex)) {
+		dev_err(DEV, "interrupted during initial handshake\n");
+		return 0; /* interrupted. not ok. */
+	}
+
+	if (mdev->data.socket == NULL) {
+		mutex_unlock(&mdev->data.mutex);
+		return 0;
+	}
+
+	memset(p, 0, sizeof(*p));
+	p->protocol_min = cpu_to_be32(PRO_VERSION_MIN);
+	p->protocol_max = cpu_to_be32(PRO_VERSION_MAX);
+	ok = _drbd_send_cmd( mdev, mdev->data.socket, P_HAND_SHAKE,
+			     (struct p_header *)p, sizeof(*p), 0 );
+	mutex_unlock(&mdev->data.mutex);
+	return ok;
+}
+
+/*
+ * return values:
+ *   1 yes, we have a valid connection
+ *   0 oops, did not work out, please try again
+ *  -1 peer talks different language,
+ *     no point in trying again, please go standalone.
+ */
+static int drbd_do_handshake(struct drbd_conf *mdev)
+{
+	/* ASSERT current == mdev->receiver ... */
+	struct p_handshake *p = &mdev->data.rbuf.handshake;
+	const int expect = sizeof(struct p_handshake)
+			  -sizeof(struct p_header);
+	int rv;
+
+	rv = drbd_send_handshake(mdev);
+	if (!rv)
+		return 0;
+
+	rv = drbd_recv_header(mdev, &p->head);
+	if (!rv)
+		return 0;
+
+	if (p->head.command != P_HAND_SHAKE) {
+		dev_err(DEV, "expected HandShake packet, received: %s (0x%04x)\n",
+		     cmdname(p->head.command), p->head.command);
+		return -1;
+	}
+
+	if (p->head.length != expect) {
+		dev_err(DEV, "expected HandShake length: %u, received: %u\n",
+		     expect, p->head.length);
+		return -1;
+	}
+
+	rv = drbd_recv(mdev, &p->head.payload, expect);
+
+	if (rv != expect) {
+		dev_err(DEV, "short read receiving handshake packet: l=%u\n", rv);
+		return 0;
+	}
+
+	p->protocol_min = be32_to_cpu(p->protocol_min);
+	p->protocol_max = be32_to_cpu(p->protocol_max);
+	if (p->protocol_max == 0)
+		p->protocol_max = p->protocol_min;
+
+	if (PRO_VERSION_MAX < p->protocol_min ||
+	    PRO_VERSION_MIN > p->protocol_max)
+		goto incompat;
+
+	mdev->agreed_pro_version = min_t(int, PRO_VERSION_MAX, p->protocol_max);
+
+	dev_info(DEV, "Handshake successful: "
+	     "Agreed network protocol version %d\n", mdev->agreed_pro_version);
+
+	return 1;
+
+ incompat:
+	dev_err(DEV, "incompatible DRBD dialects: "
+	    "I support %d-%d, peer supports %d-%d\n",
+	    PRO_VERSION_MIN, PRO_VERSION_MAX,
+	    p->protocol_min, p->protocol_max);
+	return -1;
+}
+
+#if !defined(CONFIG_CRYPTO_HMAC) && !defined(CONFIG_CRYPTO_HMAC_MODULE)
+static int drbd_do_auth(struct drbd_conf *mdev)
+{
+	dev_err(DEV, "This kernel was build without CONFIG_CRYPTO_HMAC.\n");
+	dev_err(DEV, "You need to disable 'cram-hmac-alg' in drbd.conf.\n");
+	return 0;
+}
+#else
+#define CHALLENGE_LEN 64
+static int drbd_do_auth(struct drbd_conf *mdev)
+{
+	char my_challenge[CHALLENGE_LEN];  /* 64 Bytes... */
+	struct scatterlist sg;
+	char *response = NULL;
+	char *right_response = NULL;
+	char *peers_ch = NULL;
+	struct p_header p;
+	unsigned int key_len = strlen(mdev->net_conf->shared_secret);
+	unsigned int resp_size;
+	struct hash_desc desc;
+	int rv;
+
+	desc.tfm = mdev->cram_hmac_tfm;
+	desc.flags = 0;
+
+	rv = crypto_hash_setkey(mdev->cram_hmac_tfm,
+				(u8 *)mdev->net_conf->shared_secret, key_len);
+	if (rv) {
+		dev_err(DEV, "crypto_hash_setkey() failed with %d\n", rv);
+		rv = 0;
+		goto fail;
+	}
+
+	get_random_bytes(my_challenge, CHALLENGE_LEN);
+
+	rv = drbd_send_cmd2(mdev, P_AUTH_CHALLENGE, my_challenge, CHALLENGE_LEN);
+	if (!rv)
+		goto fail;
+
+	rv = drbd_recv_header(mdev, &p);
+	if (!rv)
+		goto fail;
+
+	if (p.command != P_AUTH_CHALLENGE) {
+		dev_err(DEV, "expected AuthChallenge packet, received: %s (0x%04x)\n",
+		    cmdname(p.command), p.command);
+		rv = 0;
+		goto fail;
+	}
+
+	if (p.length > CHALLENGE_LEN*2) {
+		dev_err(DEV, "expected AuthChallenge payload too big.\n");
+		rv = 0;
+		goto fail;
+	}
+
+	peers_ch = kmalloc(p.length, GFP_NOIO);
+	if (peers_ch == NULL) {
+		dev_err(DEV, "kmalloc of peers_ch failed\n");
+		rv = 0;
+		goto fail;
+	}
+
+	rv = drbd_recv(mdev, peers_ch, p.length);
+
+	if (rv != p.length) {
+		dev_err(DEV, "short read AuthChallenge: l=%u\n", rv);
+		rv = 0;
+		goto fail;
+	}
+
+	resp_size = crypto_hash_digestsize(mdev->cram_hmac_tfm);
+	response = kmalloc(resp_size, GFP_NOIO);
+	if (response == NULL) {
+		dev_err(DEV, "kmalloc of response failed\n");
+		rv = 0;
+		goto fail;
+	}
+
+	sg_init_table(&sg, 1);
+	sg_set_buf(&sg, peers_ch, p.length);
+
+	rv = crypto_hash_digest(&desc, &sg, sg.length, response);
+	if (rv) {
+		dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
+		rv = 0;
+		goto fail;
+	}
+
+	rv = drbd_send_cmd2(mdev, P_AUTH_RESPONSE, response, resp_size);
+	if (!rv)
+		goto fail;
+
+	rv = drbd_recv_header(mdev, &p);
+	if (!rv)
+		goto fail;
+
+	if (p.command != P_AUTH_RESPONSE) {
+		dev_err(DEV, "expected AuthResponse packet, received: %s (0x%04x)\n",
+		    cmdname(p.command), p.command);
+		rv = 0;
+		goto fail;
+	}
+
+	if (p.length != resp_size) {
+		dev_err(DEV, "expected AuthResponse payload of wrong size\n");
+		rv = 0;
+		goto fail;
+	}
+
+	rv = drbd_recv(mdev, response , resp_size);
+
+	if (rv != resp_size) {
+		dev_err(DEV, "short read receiving AuthResponse: l=%u\n", rv);
+		rv = 0;
+		goto fail;
+	}
+
+	right_response = kmalloc(resp_size, GFP_NOIO);
+	if (response == NULL) {
+		dev_err(DEV, "kmalloc of right_response failed\n");
+		rv = 0;
+		goto fail;
+	}
+
+	sg_set_buf(&sg, my_challenge, CHALLENGE_LEN);
+
+	rv = crypto_hash_digest(&desc, &sg, sg.length, right_response);
+	if (rv) {
+		dev_err(DEV, "crypto_hash_digest() failed with %d\n", rv);
+		rv = 0;
+		goto fail;
+	}
+
+	rv = !memcmp(response, right_response, resp_size);
+
+	if (rv)
+		dev_info(DEV, "Peer authenticated using %d bytes of '%s' HMAC\n",
+		     resp_size, mdev->net_conf->cram_hmac_alg);
+
+ fail:
+	kfree(peers_ch);
+	kfree(response);
+	kfree(right_response);
+
+	return rv;
+}
+#endif
+
+int drbdd_init(struct drbd_thread *thi)
+{
+	struct drbd_conf *mdev = thi->mdev;
+	unsigned int minor = mdev_to_minor(mdev);
+	int h;
+
+	sprintf(current->comm, "drbd%d_receiver", minor);
+
+	dev_info(DEV, "receiver (re)started\n");
+
+	do {
+		h = drbd_connect(mdev);
+		if (h == 0) {
+			drbd_disconnect(mdev);
+			__set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(HZ);
+		}
+		if (h == -1) {
+			dev_warn(DEV, "Discarding network configuration.\n");
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+		}
+	} while (h == 0);
+
+	if (h > 0) {
+		if (get_net_conf(mdev)) {
+			drbdd(mdev);
+			put_net_conf(mdev);
+		}
+	}
+
+	drbd_disconnect(mdev);
+
+	dev_info(DEV, "receiver terminated\n");
+	return 0;
+}
+
+/* ********* acknowledge sender ******** */
+
+static int got_RqSReply(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_req_state_reply *p = (struct p_req_state_reply *)h;
+
+	int retcode = be32_to_cpu(p->retcode);
+
+	if (retcode >= SS_SUCCESS) {
+		set_bit(CL_ST_CHG_SUCCESS, &mdev->flags);
+	} else {
+		set_bit(CL_ST_CHG_FAIL, &mdev->flags);
+		dev_err(DEV, "Requested state change failed by peer: %s (%d)\n",
+		    drbd_set_st_err_str(retcode), retcode);
+	}
+	wake_up(&mdev->state_wait);
+
+	return TRUE;
+}
+
+static int got_Ping(struct drbd_conf *mdev, struct p_header *h)
+{
+	return drbd_send_ping_ack(mdev);
+
+}
+
+static int got_PingAck(struct drbd_conf *mdev, struct p_header *h)
+{
+	/* restore idle timeout */
+	mdev->meta.socket->sk->sk_rcvtimeo = mdev->net_conf->ping_int*HZ;
+
+	return TRUE;
+}
+
+static int got_IsInSync(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_block_ack *p = (struct p_block_ack *)h;
+	sector_t sector = be64_to_cpu(p->sector);
+	int blksize = be32_to_cpu(p->blksize);
+
+	D_ASSERT(mdev->agreed_pro_version >= 89);
+
+	update_peer_seq(mdev, be32_to_cpu(p->seq_num));
+
+	drbd_rs_complete_io(mdev, sector);
+	drbd_set_in_sync(mdev, sector, blksize);
+	/* rs_same_csums is supposed to count in units of BM_BLOCK_SIZE */
+	mdev->rs_same_csum += (blksize >> BM_BLOCK_SHIFT);
+	dec_rs_pending(mdev);
+
+	return TRUE;
+}
+
+/* when we receive the ACK for a write request,
+ * verify that we actually know about it */
+static struct drbd_request *_ack_id_to_req(struct drbd_conf *mdev,
+	u64 id, sector_t sector)
+{
+	struct hlist_head *slot = tl_hash_slot(mdev, sector);
+	struct hlist_node *n;
+	struct drbd_request *req;
+
+	hlist_for_each_entry(req, n, slot, colision) {
+		if ((unsigned long)req == (unsigned long)id) {
+			if (req->sector != sector) {
+				dev_err(DEV, "_ack_id_to_req: found req %p but it has "
+				    "wrong sector (%llus versus %llus)\n", req,
+				    (unsigned long long)req->sector,
+				    (unsigned long long)sector);
+				break;
+			}
+			return req;
+		}
+	}
+	dev_err(DEV, "_ack_id_to_req: failed to find req %p, sector %llus in list\n",
+		(void *)(unsigned long)id, (unsigned long long)sector);
+	return NULL;
+}
+
+typedef struct drbd_request *(req_validator_fn)
+	(struct drbd_conf *mdev, u64 id, sector_t sector);
+
+static int validate_req_change_req_state(struct drbd_conf *mdev,
+	u64 id, sector_t sector, req_validator_fn validator,
+	const char *func, enum drbd_req_event what)
+{
+	struct drbd_request *req;
+	struct bio_and_error m;
+
+	spin_lock_irq(&mdev->req_lock);
+	req = validator(mdev, id, sector);
+	if (unlikely(!req)) {
+		spin_unlock_irq(&mdev->req_lock);
+		dev_err(DEV, "%s: got a corrupt block_id/sector pair\n", func);
+		return FALSE;
+	}
+	__req_mod(req, what, &m);
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (m.bio)
+		complete_master_bio(mdev, &m);
+	return TRUE;
+}
+
+static int got_BlockAck(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_block_ack *p = (struct p_block_ack *)h;
+	sector_t sector = be64_to_cpu(p->sector);
+	int blksize = be32_to_cpu(p->blksize);
+	enum drbd_req_event what;
+
+	update_peer_seq(mdev, be32_to_cpu(p->seq_num));
+
+	if (is_syncer_block_id(p->block_id)) {
+		drbd_set_in_sync(mdev, sector, blksize);
+		dec_rs_pending(mdev);
+		return TRUE;
+	}
+	switch (be16_to_cpu(h->command)) {
+	case P_RS_WRITE_ACK:
+		D_ASSERT(mdev->net_conf->wire_protocol == DRBD_PROT_C);
+		what = write_acked_by_peer_and_sis;
+		break;
+	case P_WRITE_ACK:
+		D_ASSERT(mdev->net_conf->wire_protocol == DRBD_PROT_C);
+		what = write_acked_by_peer;
+		break;
+	case P_RECV_ACK:
+		D_ASSERT(mdev->net_conf->wire_protocol == DRBD_PROT_B);
+		what = recv_acked_by_peer;
+		break;
+	case P_DISCARD_ACK:
+		D_ASSERT(mdev->net_conf->wire_protocol == DRBD_PROT_C);
+		what = conflict_discarded_by_peer;
+		break;
+	default:
+		D_ASSERT(0);
+		return FALSE;
+	}
+
+	return validate_req_change_req_state(mdev, p->block_id, sector,
+		_ack_id_to_req, __func__ , what);
+}
+
+static int got_NegAck(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_block_ack *p = (struct p_block_ack *)h;
+	sector_t sector = be64_to_cpu(p->sector);
+
+	if (__ratelimit(&drbd_ratelimit_state))
+		dev_warn(DEV, "Got NegAck packet. Peer is in troubles?\n");
+
+	update_peer_seq(mdev, be32_to_cpu(p->seq_num));
+
+	if (is_syncer_block_id(p->block_id)) {
+		int size = be32_to_cpu(p->blksize);
+		dec_rs_pending(mdev);
+		drbd_rs_failed_io(mdev, sector, size);
+		return TRUE;
+	}
+	return validate_req_change_req_state(mdev, p->block_id, sector,
+		_ack_id_to_req, __func__ , neg_acked);
+}
+
+static int got_NegDReply(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_block_ack *p = (struct p_block_ack *)h;
+	sector_t sector = be64_to_cpu(p->sector);
+
+	update_peer_seq(mdev, be32_to_cpu(p->seq_num));
+	dev_err(DEV, "Got NegDReply; Sector %llus, len %u; Fail original request.\n",
+	    (unsigned long long)sector, be32_to_cpu(p->blksize));
+
+	return validate_req_change_req_state(mdev, p->block_id, sector,
+		_ar_id_to_req, __func__ , neg_acked);
+}
+
+static int got_NegRSDReply(struct drbd_conf *mdev, struct p_header *h)
+{
+	sector_t sector;
+	int size;
+	struct p_block_ack *p = (struct p_block_ack *)h;
+
+	sector = be64_to_cpu(p->sector);
+	size = be32_to_cpu(p->blksize);
+	D_ASSERT(p->block_id == ID_SYNCER);
+
+	update_peer_seq(mdev, be32_to_cpu(p->seq_num));
+
+	dec_rs_pending(mdev);
+
+	if (get_ldev_if_state(mdev, D_FAILED)) {
+		drbd_rs_complete_io(mdev, sector);
+		drbd_rs_failed_io(mdev, sector, size);
+		put_ldev(mdev);
+	}
+
+	return TRUE;
+}
+
+static int got_BarrierAck(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_barrier_ack *p = (struct p_barrier_ack *)h;
+
+	tl_release(mdev, p->barrier, be32_to_cpu(p->set_size));
+
+	return TRUE;
+}
+
+static int got_OVResult(struct drbd_conf *mdev, struct p_header *h)
+{
+	struct p_block_ack *p = (struct p_block_ack *)h;
+	struct drbd_work *w;
+	sector_t sector;
+	int size;
+
+	sector = be64_to_cpu(p->sector);
+	size = be32_to_cpu(p->blksize);
+
+	update_peer_seq(mdev, be32_to_cpu(p->seq_num));
+
+	if (be64_to_cpu(p->block_id) == ID_OUT_OF_SYNC)
+		drbd_ov_oos_found(mdev, sector, size);
+	else
+		ov_oos_print(mdev);
+
+	drbd_rs_complete_io(mdev, sector);
+	dec_rs_pending(mdev);
+
+	if (--mdev->ov_left == 0) {
+		w = kmalloc(sizeof(*w), GFP_NOIO);
+		if (w) {
+			w->cb = w_ov_finished;
+			drbd_queue_work_front(&mdev->data.work, w);
+		} else {
+			dev_err(DEV, "kmalloc(w) failed.");
+			ov_oos_print(mdev);
+			drbd_resync_finished(mdev);
+		}
+	}
+	return TRUE;
+}
+
+struct asender_cmd {
+	size_t pkt_size;
+	int (*process)(struct drbd_conf *mdev, struct p_header *h);
+};
+
+static struct asender_cmd *get_asender_cmd(int cmd)
+{
+	static struct asender_cmd asender_tbl[] = {
+		/* anything missing from this table is in
+		 * the drbd_cmd_handler (drbd_default_handler) table,
+		 * see the beginning of drbdd() */
+	[P_PING]	    = { sizeof(struct p_header), got_Ping },
+	[P_PING_ACK]	    = { sizeof(struct p_header), got_PingAck },
+	[P_RECV_ACK]	    = { sizeof(struct p_block_ack), got_BlockAck },
+	[P_WRITE_ACK]	    = { sizeof(struct p_block_ack), got_BlockAck },
+	[P_RS_WRITE_ACK]    = { sizeof(struct p_block_ack), got_BlockAck },
+	[P_DISCARD_ACK]	    = { sizeof(struct p_block_ack), got_BlockAck },
+	[P_NEG_ACK]	    = { sizeof(struct p_block_ack), got_NegAck },
+	[P_NEG_DREPLY]	    = { sizeof(struct p_block_ack), got_NegDReply },
+	[P_NEG_RS_DREPLY]   = { sizeof(struct p_block_ack), got_NegRSDReply},
+	[P_OV_RESULT]	    = { sizeof(struct p_block_ack), got_OVResult },
+	[P_BARRIER_ACK]	    = { sizeof(struct p_barrier_ack), got_BarrierAck },
+	[P_STATE_CHG_REPLY] = { sizeof(struct p_req_state_reply), got_RqSReply },
+	[P_RS_IS_IN_SYNC]   = { sizeof(struct p_block_ack), got_IsInSync },
+	[P_MAX_CMD]	    = { 0, NULL },
+	};
+	if (cmd > P_MAX_CMD || asender_tbl[cmd].process == NULL)
+		return NULL;
+	return &asender_tbl[cmd];
+}
+
+int drbd_asender(struct drbd_thread *thi)
+{
+	struct drbd_conf *mdev = thi->mdev;
+	struct p_header *h = &mdev->meta.rbuf.header;
+	struct asender_cmd *cmd = NULL;
+
+	int rv, len;
+	void *buf    = h;
+	int received = 0;
+	int expect   = sizeof(struct p_header);
+	int empty;
+
+	sprintf(current->comm, "drbd%d_asender", mdev_to_minor(mdev));
+
+	current->policy = SCHED_RR;  /* Make this a realtime task! */
+	current->rt_priority = 2;    /* more important than all other tasks */
+
+	while (get_t_state(thi) == Running) {
+		drbd_thread_current_set_cpu(mdev);
+		if (test_and_clear_bit(SEND_PING, &mdev->flags)) {
+			ERR_IF(!drbd_send_ping(mdev)) goto reconnect;
+			mdev->meta.socket->sk->sk_rcvtimeo =
+				mdev->net_conf->ping_timeo*HZ/10;
+		}
+
+		/* conditionally cork;
+		 * it may hurt latency if we cork without much to send */
+		if (!mdev->net_conf->no_cork &&
+			3 < atomic_read(&mdev->unacked_cnt))
+			drbd_tcp_cork(mdev->meta.socket);
+		while (1) {
+			clear_bit(SIGNAL_ASENDER, &mdev->flags);
+			flush_signals(current);
+			if (!drbd_process_done_ee(mdev)) {
+				dev_err(DEV, "process_done_ee() = NOT_OK\n");
+				goto reconnect;
+			}
+			/* to avoid race with newly queued ACKs */
+			set_bit(SIGNAL_ASENDER, &mdev->flags);
+			spin_lock_irq(&mdev->req_lock);
+			empty = list_empty(&mdev->done_ee);
+			spin_unlock_irq(&mdev->req_lock);
+			/* new ack may have been queued right here,
+			 * but then there is also a signal pending,
+			 * and we start over... */
+			if (empty)
+				break;
+		}
+		/* but unconditionally uncork unless disabled */
+		if (!mdev->net_conf->no_cork)
+			drbd_tcp_uncork(mdev->meta.socket);
+
+		/* short circuit, recv_msg would return EINTR anyways. */
+		if (signal_pending(current))
+			continue;
+
+		rv = drbd_recv_short(mdev, mdev->meta.socket,
+				     buf, expect-received, 0);
+		clear_bit(SIGNAL_ASENDER, &mdev->flags);
+
+		flush_signals(current);
+
+		/* Note:
+		 * -EINTR	 (on meta) we got a signal
+		 * -EAGAIN	 (on meta) rcvtimeo expired
+		 * -ECONNRESET	 other side closed the connection
+		 * -ERESTARTSYS  (on data) we got a signal
+		 * rv <  0	 other than above: unexpected error!
+		 * rv == expected: full header or command
+		 * rv <  expected: "woken" by signal during receive
+		 * rv == 0	 : "connection shut down by peer"
+		 */
+		if (likely(rv > 0)) {
+			received += rv;
+			buf	 += rv;
+		} else if (rv == 0) {
+			dev_err(DEV, "meta connection shut down by peer.\n");
+			goto reconnect;
+		} else if (rv == -EAGAIN) {
+			if (mdev->meta.socket->sk->sk_rcvtimeo ==
+			    mdev->net_conf->ping_timeo*HZ/10) {
+				dev_err(DEV, "PingAck did not arrive in time.\n");
+				goto reconnect;
+			}
+			set_bit(SEND_PING, &mdev->flags);
+			continue;
+		} else if (rv == -EINTR) {
+			continue;
+		} else {
+			dev_err(DEV, "sock_recvmsg returned %d\n", rv);
+			goto reconnect;
+		}
+
+		if (received == expect && cmd == NULL) {
+			if (unlikely(h->magic != BE_DRBD_MAGIC)) {
+				dev_err(DEV, "magic?? on meta m: 0x%lx c: %d l: %d\n",
+				    (long)be32_to_cpu(h->magic),
+				    h->command, h->length);
+				goto reconnect;
+			}
+			cmd = get_asender_cmd(be16_to_cpu(h->command));
+			len = be16_to_cpu(h->length);
+			if (unlikely(cmd == NULL)) {
+				dev_err(DEV, "unknown command?? on meta m: 0x%lx c: %d l: %d\n",
+				    (long)be32_to_cpu(h->magic),
+				    h->command, h->length);
+				goto disconnect;
+			}
+			expect = cmd->pkt_size;
+			ERR_IF(len != expect-sizeof(struct p_header))
+				goto reconnect;
+		}
+		if (received == expect) {
+			D_ASSERT(cmd != NULL);
+			if (!cmd->process(mdev, h))
+				goto reconnect;
+
+			buf	 = h;
+			received = 0;
+			expect	 = sizeof(struct p_header);
+			cmd	 = NULL;
+		}
+	}
+
+	if (0) {
+reconnect:
+		drbd_force_state(mdev, NS(conn, C_NETWORK_FAILURE));
+	}
+	if (0) {
+disconnect:
+		drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+	}
+	clear_bit(SIGNAL_ASENDER, &mdev->flags);
+
+	D_ASSERT(mdev->state.conn < C_CONNECTED);
+	dev_info(DEV, "asender terminated\n");
+
+	return 0;
+}
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
new file mode 100644
index 0000000..de81ab7
--- /dev/null
+++ b/drivers/block/drbd/drbd_req.c
@@ -0,0 +1,1125 @@
+/*
+   drbd_req.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/drbd.h>
+#include "drbd_int.h"
+#include "drbd_req.h"
+
+
+/* Update disk stats at start of I/O request */
+static void _drbd_start_io_acct(struct drbd_conf *mdev, struct drbd_request *req, struct bio *bio)
+{
+	const int rw = bio_data_dir(bio);
+	int cpu;
+	cpu = part_stat_lock();
+	part_stat_inc(cpu, &mdev->vdisk->part0, ios[rw]);
+	part_stat_add(cpu, &mdev->vdisk->part0, sectors[rw], bio_sectors(bio));
+	part_inc_in_flight(&mdev->vdisk->part0, rw);
+	part_stat_unlock();
+}
+
+/* Update disk stats when completing request upwards */
+static void _drbd_end_io_acct(struct drbd_conf *mdev, struct drbd_request *req)
+{
+	int rw = bio_data_dir(req->master_bio);
+	unsigned long duration = jiffies - req->start_time;
+	int cpu;
+	cpu = part_stat_lock();
+	part_stat_add(cpu, &mdev->vdisk->part0, ticks[rw], duration);
+	part_round_stats(cpu, &mdev->vdisk->part0);
+	part_dec_in_flight(&mdev->vdisk->part0, rw);
+	part_stat_unlock();
+}
+
+static void _req_is_done(struct drbd_conf *mdev, struct drbd_request *req, const int rw)
+{
+	const unsigned long s = req->rq_state;
+	/* if it was a write, we may have to set the corresponding
+	 * bit(s) out-of-sync first. If it had a local part, we need to
+	 * release the reference to the activity log. */
+	if (rw == WRITE) {
+		/* remove it from the transfer log.
+		 * well, only if it had been there in the first
+		 * place... if it had not (local only or conflicting
+		 * and never sent), it should still be "empty" as
+		 * initialized in drbd_req_new(), so we can list_del() it
+		 * here unconditionally */
+		list_del(&req->tl_requests);
+		/* Set out-of-sync unless both OK flags are set
+		 * (local only or remote failed).
+		 * Other places where we set out-of-sync:
+		 * READ with local io-error */
+		if (!(s & RQ_NET_OK) || !(s & RQ_LOCAL_OK))
+			drbd_set_out_of_sync(mdev, req->sector, req->size);
+
+		if ((s & RQ_NET_OK) && (s & RQ_LOCAL_OK) && (s & RQ_NET_SIS))
+			drbd_set_in_sync(mdev, req->sector, req->size);
+
+		/* one might be tempted to move the drbd_al_complete_io
+		 * to the local io completion callback drbd_endio_pri.
+		 * but, if this was a mirror write, we may only
+		 * drbd_al_complete_io after this is RQ_NET_DONE,
+		 * otherwise the extent could be dropped from the al
+		 * before it has actually been written on the peer.
+		 * if we crash before our peer knows about the request,
+		 * but after the extent has been dropped from the al,
+		 * we would forget to resync the corresponding extent.
+		 */
+		if (s & RQ_LOCAL_MASK) {
+			if (get_ldev_if_state(mdev, D_FAILED)) {
+				drbd_al_complete_io(mdev, req->sector);
+				put_ldev(mdev);
+			} else if (__ratelimit(&drbd_ratelimit_state)) {
+				dev_warn(DEV, "Should have called drbd_al_complete_io(, %llu), "
+				     "but my Disk seems to have failed :(\n",
+				     (unsigned long long) req->sector);
+			}
+		}
+	}
+
+	/* if it was a local io error, we want to notify our
+	 * peer about that, and see if we need to
+	 * detach the disk and stuff.
+	 * to avoid allocating some special work
+	 * struct, reuse the request. */
+
+	/* THINK
+	 * why do we do this not when we detect the error,
+	 * but delay it until it is "done", i.e. possibly
+	 * until the next barrier ack? */
+
+	if (rw == WRITE &&
+	    ((s & RQ_LOCAL_MASK) && !(s & RQ_LOCAL_OK))) {
+		if (!(req->w.list.next == LIST_POISON1 ||
+		      list_empty(&req->w.list))) {
+			/* DEBUG ASSERT only; if this triggers, we
+			 * probably corrupt the worker list here */
+			dev_err(DEV, "req->w.list.next = %p\n", req->w.list.next);
+			dev_err(DEV, "req->w.list.prev = %p\n", req->w.list.prev);
+		}
+		req->w.cb = w_io_error;
+		drbd_queue_work(&mdev->data.work, &req->w);
+		/* drbd_req_free() is done in w_io_error */
+	} else {
+		drbd_req_free(req);
+	}
+}
+
+static void queue_barrier(struct drbd_conf *mdev)
+{
+	struct drbd_tl_epoch *b;
+
+	/* We are within the req_lock. Once we queued the barrier for sending,
+	 * we set the CREATE_BARRIER bit. It is cleared as soon as a new
+	 * barrier/epoch object is added. This is the only place this bit is
+	 * set. It indicates that the barrier for this epoch is already queued,
+	 * and no new epoch has been created yet. */
+	if (test_bit(CREATE_BARRIER, &mdev->flags))
+		return;
+
+	b = mdev->newest_tle;
+	b->w.cb = w_send_barrier;
+	/* inc_ap_pending done here, so we won't
+	 * get imbalanced on connection loss.
+	 * dec_ap_pending will be done in got_BarrierAck
+	 * or (on connection loss) in tl_clear.  */
+	inc_ap_pending(mdev);
+	drbd_queue_work(&mdev->data.work, &b->w);
+	set_bit(CREATE_BARRIER, &mdev->flags);
+}
+
+static void _about_to_complete_local_write(struct drbd_conf *mdev,
+	struct drbd_request *req)
+{
+	const unsigned long s = req->rq_state;
+	struct drbd_request *i;
+	struct drbd_epoch_entry *e;
+	struct hlist_node *n;
+	struct hlist_head *slot;
+
+	/* before we can signal completion to the upper layers,
+	 * we may need to close the current epoch */
+	if (mdev->state.conn >= C_CONNECTED &&
+	    req->epoch == mdev->newest_tle->br_number)
+		queue_barrier(mdev);
+
+	/* we need to do the conflict detection stuff,
+	 * if we have the ee_hash (two_primaries) and
+	 * this has been on the network */
+	if ((s & RQ_NET_DONE) && mdev->ee_hash != NULL) {
+		const sector_t sector = req->sector;
+		const int size = req->size;
+
+		/* ASSERT:
+		 * there must be no conflicting requests, since
+		 * they must have been failed on the spot */
+#define OVERLAPS overlaps(sector, size, i->sector, i->size)
+		slot = tl_hash_slot(mdev, sector);
+		hlist_for_each_entry(i, n, slot, colision) {
+			if (OVERLAPS) {
+				dev_alert(DEV, "LOGIC BUG: completed: %p %llus +%u; "
+				      "other: %p %llus +%u\n",
+				      req, (unsigned long long)sector, size,
+				      i, (unsigned long long)i->sector, i->size);
+			}
+		}
+
+		/* maybe "wake" those conflicting epoch entries
+		 * that wait for this request to finish.
+		 *
+		 * currently, there can be only _one_ such ee
+		 * (well, or some more, which would be pending
+		 * P_DISCARD_ACK not yet sent by the asender...),
+		 * since we block the receiver thread upon the
+		 * first conflict detection, which will wait on
+		 * misc_wait.  maybe we want to assert that?
+		 *
+		 * anyways, if we found one,
+		 * we just have to do a wake_up.  */
+#undef OVERLAPS
+#define OVERLAPS overlaps(sector, size, e->sector, e->size)
+		slot = ee_hash_slot(mdev, req->sector);
+		hlist_for_each_entry(e, n, slot, colision) {
+			if (OVERLAPS) {
+				wake_up(&mdev->misc_wait);
+				break;
+			}
+		}
+	}
+#undef OVERLAPS
+}
+
+void complete_master_bio(struct drbd_conf *mdev,
+		struct bio_and_error *m)
+{
+	bio_endio(m->bio, m->error);
+	dec_ap_bio(mdev);
+}
+
+/* Helper for __req_mod().
+ * Set m->bio to the master bio, if it is fit to be completed,
+ * or leave it alone (it is initialized to NULL in __req_mod),
+ * if it has already been completed, or cannot be completed yet.
+ * If m->bio is set, the error status to be returned is placed in m->error.
+ */
+void _req_may_be_done(struct drbd_request *req, struct bio_and_error *m)
+{
+	const unsigned long s = req->rq_state;
+	struct drbd_conf *mdev = req->mdev;
+	/* only WRITES may end up here without a master bio (on barrier ack) */
+	int rw = req->master_bio ? bio_data_dir(req->master_bio) : WRITE;
+
+	/* we must not complete the master bio, while it is
+	 *	still being processed by _drbd_send_zc_bio (drbd_send_dblock)
+	 *	not yet acknowledged by the peer
+	 *	not yet completed by the local io subsystem
+	 * these flags may get cleared in any order by
+	 *	the worker,
+	 *	the receiver,
+	 *	the bio_endio completion callbacks.
+	 */
+	if (s & RQ_NET_QUEUED)
+		return;
+	if (s & RQ_NET_PENDING)
+		return;
+	if (s & RQ_LOCAL_PENDING)
+		return;
+
+	if (req->master_bio) {
+		/* this is data_received (remote read)
+		 * or protocol C P_WRITE_ACK
+		 * or protocol B P_RECV_ACK
+		 * or protocol A "handed_over_to_network" (SendAck)
+		 * or canceled or failed,
+		 * or killed from the transfer log due to connection loss.
+		 */
+
+		/*
+		 * figure out whether to report success or failure.
+		 *
+		 * report success when at least one of the operations succeeded.
+		 * or, to put the other way,
+		 * only report failure, when both operations failed.
+		 *
+		 * what to do about the failures is handled elsewhere.
+		 * what we need to do here is just: complete the master_bio.
+		 *
+		 * local completion error, if any, has been stored as ERR_PTR
+		 * in private_bio within drbd_endio_pri.
+		 */
+		int ok = (s & RQ_LOCAL_OK) || (s & RQ_NET_OK);
+		int error = PTR_ERR(req->private_bio);
+
+		/* remove the request from the conflict detection
+		 * respective block_id verification hash */
+		if (!hlist_unhashed(&req->colision))
+			hlist_del(&req->colision);
+		else
+			D_ASSERT((s & RQ_NET_MASK) == 0);
+
+		/* for writes we need to do some extra housekeeping */
+		if (rw == WRITE)
+			_about_to_complete_local_write(mdev, req);
+
+		/* Update disk stats */
+		_drbd_end_io_acct(mdev, req);
+
+		m->error = ok ? 0 : (error ?: -EIO);
+		m->bio = req->master_bio;
+		req->master_bio = NULL;
+	}
+
+	if ((s & RQ_NET_MASK) == 0 || (s & RQ_NET_DONE)) {
+		/* this is disconnected (local only) operation,
+		 * or protocol C P_WRITE_ACK,
+		 * or protocol A or B P_BARRIER_ACK,
+		 * or killed from the transfer log due to connection loss. */
+		_req_is_done(mdev, req, rw);
+	}
+	/* else: network part and not DONE yet. that is
+	 * protocol A or B, barrier ack still pending... */
+}
+
+/*
+ * checks whether there was an overlapping request
+ * or ee already registered.
+ *
+ * if so, return 1, in which case this request is completed on the spot,
+ * without ever being submitted or send.
+ *
+ * return 0 if it is ok to submit this request.
+ *
+ * NOTE:
+ * paranoia: assume something above us is broken, and issues different write
+ * requests for the same block simultaneously...
+ *
+ * To ensure these won't be reordered differently on both nodes, resulting in
+ * diverging data sets, we discard the later one(s). Not that this is supposed
+ * to happen, but this is the rationale why we also have to check for
+ * conflicting requests with local origin, and why we have to do so regardless
+ * of whether we allowed multiple primaries.
+ *
+ * BTW, in case we only have one primary, the ee_hash is empty anyways, and the
+ * second hlist_for_each_entry becomes a noop. This is even simpler than to
+ * grab a reference on the net_conf, and check for the two_primaries flag...
+ */
+static int _req_conflicts(struct drbd_request *req)
+{
+	struct drbd_conf *mdev = req->mdev;
+	const sector_t sector = req->sector;
+	const int size = req->size;
+	struct drbd_request *i;
+	struct drbd_epoch_entry *e;
+	struct hlist_node *n;
+	struct hlist_head *slot;
+
+	D_ASSERT(hlist_unhashed(&req->colision));
+
+	if (!get_net_conf(mdev))
+		return 0;
+
+	/* BUG_ON */
+	ERR_IF (mdev->tl_hash_s == 0)
+		goto out_no_conflict;
+	BUG_ON(mdev->tl_hash == NULL);
+
+#define OVERLAPS overlaps(i->sector, i->size, sector, size)
+	slot = tl_hash_slot(mdev, sector);
+	hlist_for_each_entry(i, n, slot, colision) {
+		if (OVERLAPS) {
+			dev_alert(DEV, "%s[%u] Concurrent local write detected! "
+			      "[DISCARD L] new: %llus +%u; "
+			      "pending: %llus +%u\n",
+			      current->comm, current->pid,
+			      (unsigned long long)sector, size,
+			      (unsigned long long)i->sector, i->size);
+			goto out_conflict;
+		}
+	}
+
+	if (mdev->ee_hash_s) {
+		/* now, check for overlapping requests with remote origin */
+		BUG_ON(mdev->ee_hash == NULL);
+#undef OVERLAPS
+#define OVERLAPS overlaps(e->sector, e->size, sector, size)
+		slot = ee_hash_slot(mdev, sector);
+		hlist_for_each_entry(e, n, slot, colision) {
+			if (OVERLAPS) {
+				dev_alert(DEV, "%s[%u] Concurrent remote write detected!"
+				      " [DISCARD L] new: %llus +%u; "
+				      "pending: %llus +%u\n",
+				      current->comm, current->pid,
+				      (unsigned long long)sector, size,
+				      (unsigned long long)e->sector, e->size);
+				goto out_conflict;
+			}
+		}
+	}
+#undef OVERLAPS
+
+out_no_conflict:
+	/* this is like it should be, and what we expected.
+	 * our users do behave after all... */
+	put_net_conf(mdev);
+	return 0;
+
+out_conflict:
+	put_net_conf(mdev);
+	return 1;
+}
+
+/* obviously this could be coded as many single functions
+ * instead of one huge switch,
+ * or by putting the code directly in the respective locations
+ * (as it has been before).
+ *
+ * but having it this way
+ *  enforces that it is all in this one place, where it is easier to audit,
+ *  it makes it obvious that whatever "event" "happens" to a request should
+ *  happen "atomically" within the req_lock,
+ *  and it enforces that we have to think in a very structured manner
+ *  about the "events" that may happen to a request during its life time ...
+ */
+void __req_mod(struct drbd_request *req, enum drbd_req_event what,
+		struct bio_and_error *m)
+{
+	struct drbd_conf *mdev = req->mdev;
+	m->bio = NULL;
+
+	switch (what) {
+	default:
+		dev_err(DEV, "LOGIC BUG in %s:%u\n", __FILE__ , __LINE__);
+		break;
+
+	/* does not happen...
+	 * initialization done in drbd_req_new
+	case created:
+		break;
+		*/
+
+	case to_be_send: /* via network */
+		/* reached via drbd_make_request_common
+		 * and from w_read_retry_remote */
+		D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+		req->rq_state |= RQ_NET_PENDING;
+		inc_ap_pending(mdev);
+		break;
+
+	case to_be_submitted: /* locally */
+		/* reached via drbd_make_request_common */
+		D_ASSERT(!(req->rq_state & RQ_LOCAL_MASK));
+		req->rq_state |= RQ_LOCAL_PENDING;
+		break;
+
+	case completed_ok:
+		if (bio_data_dir(req->master_bio) == WRITE)
+			mdev->writ_cnt += req->size>>9;
+		else
+			mdev->read_cnt += req->size>>9;
+
+		req->rq_state |= (RQ_LOCAL_COMPLETED|RQ_LOCAL_OK);
+		req->rq_state &= ~RQ_LOCAL_PENDING;
+
+		_req_may_be_done(req, m);
+		put_ldev(mdev);
+		break;
+
+	case write_completed_with_error:
+		req->rq_state |= RQ_LOCAL_COMPLETED;
+		req->rq_state &= ~RQ_LOCAL_PENDING;
+
+		dev_alert(DEV, "Local WRITE failed sec=%llus size=%u\n",
+		      (unsigned long long)req->sector, req->size);
+		/* and now: check how to handle local io error. */
+		__drbd_chk_io_error(mdev, FALSE);
+		_req_may_be_done(req, m);
+		put_ldev(mdev);
+		break;
+
+	case read_ahead_completed_with_error:
+		/* it is legal to fail READA */
+		req->rq_state |= RQ_LOCAL_COMPLETED;
+		req->rq_state &= ~RQ_LOCAL_PENDING;
+		_req_may_be_done(req, m);
+		put_ldev(mdev);
+		break;
+
+	case read_completed_with_error:
+		drbd_set_out_of_sync(mdev, req->sector, req->size);
+
+		req->rq_state |= RQ_LOCAL_COMPLETED;
+		req->rq_state &= ~RQ_LOCAL_PENDING;
+
+		dev_alert(DEV, "Local READ failed sec=%llus size=%u\n",
+		      (unsigned long long)req->sector, req->size);
+		/* _req_mod(req,to_be_send); oops, recursion... */
+		D_ASSERT(!(req->rq_state & RQ_NET_MASK));
+		req->rq_state |= RQ_NET_PENDING;
+		inc_ap_pending(mdev);
+
+		__drbd_chk_io_error(mdev, FALSE);
+		put_ldev(mdev);
+		/* NOTE: if we have no connection,
+		 * or know the peer has no good data either,
+		 * then we don't actually need to "queue_for_net_read",
+		 * but we do so anyways, since the drbd_io_error()
+		 * and the potential state change to "Diskless"
+		 * needs to be done from process context */
+
+		/* fall through: _req_mod(req,queue_for_net_read); */
+
+	case queue_for_net_read:
+		/* READ or READA, and
+		 * no local disk,
+		 * or target area marked as invalid,
+		 * or just got an io-error. */
+		/* from drbd_make_request_common
+		 * or from bio_endio during read io-error recovery */
+
+		/* so we can verify the handle in the answer packet
+		 * corresponding hlist_del is in _req_may_be_done() */
+		hlist_add_head(&req->colision, ar_hash_slot(mdev, req->sector));
+
+		set_bit(UNPLUG_REMOTE, &mdev->flags);
+
+		D_ASSERT(req->rq_state & RQ_NET_PENDING);
+		req->rq_state |= RQ_NET_QUEUED;
+		req->w.cb = (req->rq_state & RQ_LOCAL_MASK)
+			? w_read_retry_remote
+			: w_send_read_req;
+		drbd_queue_work(&mdev->data.work, &req->w);
+		break;
+
+	case queue_for_net_write:
+		/* assert something? */
+		/* from drbd_make_request_common only */
+
+		hlist_add_head(&req->colision, tl_hash_slot(mdev, req->sector));
+		/* corresponding hlist_del is in _req_may_be_done() */
+
+		/* NOTE
+		 * In case the req ended up on the transfer log before being
+		 * queued on the worker, it could lead to this request being
+		 * missed during cleanup after connection loss.
+		 * So we have to do both operations here,
+		 * within the same lock that protects the transfer log.
+		 *
+		 * _req_add_to_epoch(req); this has to be after the
+		 * _maybe_start_new_epoch(req); which happened in
+		 * drbd_make_request_common, because we now may set the bit
+		 * again ourselves to close the current epoch.
+		 *
+		 * Add req to the (now) current epoch (barrier). */
+
+		/* otherwise we may lose an unplug, which may cause some remote
+		 * io-scheduler timeout to expire, increasing maximum latency,
+		 * hurting performance. */
+		set_bit(UNPLUG_REMOTE, &mdev->flags);
+
+		/* see drbd_make_request_common,
+		 * just after it grabs the req_lock */
+		D_ASSERT(test_bit(CREATE_BARRIER, &mdev->flags) == 0);
+
+		req->epoch = mdev->newest_tle->br_number;
+		list_add_tail(&req->tl_requests,
+				&mdev->newest_tle->requests);
+
+		/* increment size of current epoch */
+		mdev->newest_tle->n_req++;
+
+		/* queue work item to send data */
+		D_ASSERT(req->rq_state & RQ_NET_PENDING);
+		req->rq_state |= RQ_NET_QUEUED;
+		req->w.cb =  w_send_dblock;
+		drbd_queue_work(&mdev->data.work, &req->w);
+
+		/* close the epoch, in case it outgrew the limit */
+		if (mdev->newest_tle->n_req >= mdev->net_conf->max_epoch_size)
+			queue_barrier(mdev);
+
+		break;
+
+	case send_canceled:
+		/* treat it the same */
+	case send_failed:
+		/* real cleanup will be done from tl_clear.  just update flags
+		 * so it is no longer marked as on the worker queue */
+		req->rq_state &= ~RQ_NET_QUEUED;
+		/* if we did it right, tl_clear should be scheduled only after
+		 * this, so this should not be necessary! */
+		_req_may_be_done(req, m);
+		break;
+
+	case handed_over_to_network:
+		/* assert something? */
+		if (bio_data_dir(req->master_bio) == WRITE &&
+		    mdev->net_conf->wire_protocol == DRBD_PROT_A) {
+			/* this is what is dangerous about protocol A:
+			 * pretend it was successfully written on the peer. */
+			if (req->rq_state & RQ_NET_PENDING) {
+				dec_ap_pending(mdev);
+				req->rq_state &= ~RQ_NET_PENDING;
+				req->rq_state |= RQ_NET_OK;
+			} /* else: neg-ack was faster... */
+			/* it is still not yet RQ_NET_DONE until the
+			 * corresponding epoch barrier got acked as well,
+			 * so we know what to dirty on connection loss */
+		}
+		req->rq_state &= ~RQ_NET_QUEUED;
+		req->rq_state |= RQ_NET_SENT;
+		/* because _drbd_send_zc_bio could sleep, and may want to
+		 * dereference the bio even after the "write_acked_by_peer" and
+		 * "completed_ok" events came in, once we return from
+		 * _drbd_send_zc_bio (drbd_send_dblock), we have to check
+		 * whether it is done already, and end it.  */
+		_req_may_be_done(req, m);
+		break;
+
+	case connection_lost_while_pending:
+		/* transfer log cleanup after connection loss */
+		/* assert something? */
+		if (req->rq_state & RQ_NET_PENDING)
+			dec_ap_pending(mdev);
+		req->rq_state &= ~(RQ_NET_OK|RQ_NET_PENDING);
+		req->rq_state |= RQ_NET_DONE;
+		/* if it is still queued, we may not complete it here.
+		 * it will be canceled soon. */
+		if (!(req->rq_state & RQ_NET_QUEUED))
+			_req_may_be_done(req, m);
+		break;
+
+	case write_acked_by_peer_and_sis:
+		req->rq_state |= RQ_NET_SIS;
+	case conflict_discarded_by_peer:
+		/* for discarded conflicting writes of multiple primaries,
+		 * there is no need to keep anything in the tl, potential
+		 * node crashes are covered by the activity log. */
+		if (what == conflict_discarded_by_peer)
+			dev_alert(DEV, "Got DiscardAck packet %llus +%u!"
+			      " DRBD is not a random data generator!\n",
+			      (unsigned long long)req->sector, req->size);
+		req->rq_state |= RQ_NET_DONE;
+		/* fall through */
+	case write_acked_by_peer:
+		/* protocol C; successfully written on peer.
+		 * Nothing to do here.
+		 * We want to keep the tl in place for all protocols, to cater
+		 * for volatile write-back caches on lower level devices.
+		 *
+		 * A barrier request is expected to have forced all prior
+		 * requests onto stable storage, so completion of a barrier
+		 * request could set NET_DONE right here, and not wait for the
+		 * P_BARRIER_ACK, but that is an unnecessary optimization. */
+
+		/* this makes it effectively the same as for: */
+	case recv_acked_by_peer:
+		/* protocol B; pretends to be successfully written on peer.
+		 * see also notes above in handed_over_to_network about
+		 * protocol != C */
+		req->rq_state |= RQ_NET_OK;
+		D_ASSERT(req->rq_state & RQ_NET_PENDING);
+		dec_ap_pending(mdev);
+		req->rq_state &= ~RQ_NET_PENDING;
+		_req_may_be_done(req, m);
+		break;
+
+	case neg_acked:
+		/* assert something? */
+		if (req->rq_state & RQ_NET_PENDING)
+			dec_ap_pending(mdev);
+		req->rq_state &= ~(RQ_NET_OK|RQ_NET_PENDING);
+
+		req->rq_state |= RQ_NET_DONE;
+		_req_may_be_done(req, m);
+		/* else: done by handed_over_to_network */
+		break;
+
+	case barrier_acked:
+		if (req->rq_state & RQ_NET_PENDING) {
+			/* barrier came in before all requests have been acked.
+			 * this is bad, because if the connection is lost now,
+			 * we won't be able to clean them up... */
+			dev_err(DEV, "FIXME (barrier_acked but pending)\n");
+			list_move(&req->tl_requests, &mdev->out_of_sequence_requests);
+		}
+		D_ASSERT(req->rq_state & RQ_NET_SENT);
+		req->rq_state |= RQ_NET_DONE;
+		_req_may_be_done(req, m);
+		break;
+
+	case data_received:
+		D_ASSERT(req->rq_state & RQ_NET_PENDING);
+		dec_ap_pending(mdev);
+		req->rq_state &= ~RQ_NET_PENDING;
+		req->rq_state |= (RQ_NET_OK|RQ_NET_DONE);
+		_req_may_be_done(req, m);
+		break;
+	};
+}
+
+/* we may do a local read if:
+ * - we are consistent (of course),
+ * - or we are generally inconsistent,
+ *   BUT we are still/already IN SYNC for this area.
+ *   since size may be bigger than BM_BLOCK_SIZE,
+ *   we may need to check several bits.
+ */
+static int drbd_may_do_local_read(struct drbd_conf *mdev, sector_t sector, int size)
+{
+	unsigned long sbnr, ebnr;
+	sector_t esector, nr_sectors;
+
+	if (mdev->state.disk == D_UP_TO_DATE)
+		return 1;
+	if (mdev->state.disk >= D_OUTDATED)
+		return 0;
+	if (mdev->state.disk <  D_INCONSISTENT)
+		return 0;
+	/* state.disk == D_INCONSISTENT   We will have a look at the BitMap */
+	nr_sectors = drbd_get_capacity(mdev->this_bdev);
+	esector = sector + (size >> 9) - 1;
+
+	D_ASSERT(sector  < nr_sectors);
+	D_ASSERT(esector < nr_sectors);
+
+	sbnr = BM_SECT_TO_BIT(sector);
+	ebnr = BM_SECT_TO_BIT(esector);
+
+	return 0 == drbd_bm_count_bits(mdev, sbnr, ebnr);
+}
+
+static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio)
+{
+	const int rw = bio_rw(bio);
+	const int size = bio->bi_size;
+	const sector_t sector = bio->bi_sector;
+	struct drbd_tl_epoch *b = NULL;
+	struct drbd_request *req;
+	int local, remote;
+	int err = -EIO;
+
+	/* allocate outside of all locks; */
+	req = drbd_req_new(mdev, bio);
+	if (!req) {
+		dec_ap_bio(mdev);
+		/* only pass the error to the upper layers.
+		 * if user cannot handle io errors, that's not our business. */
+		dev_err(DEV, "could not kmalloc() req\n");
+		bio_endio(bio, -ENOMEM);
+		return 0;
+	}
+
+	local = get_ldev(mdev);
+	if (!local) {
+		bio_put(req->private_bio); /* or we get a bio leak */
+		req->private_bio = NULL;
+	}
+	if (rw == WRITE) {
+		remote = 1;
+	} else {
+		/* READ || READA */
+		if (local) {
+			if (!drbd_may_do_local_read(mdev, sector, size)) {
+				/* we could kick the syncer to
+				 * sync this extent asap, wait for
+				 * it, then continue locally.
+				 * Or just issue the request remotely.
+				 */
+				local = 0;
+				bio_put(req->private_bio);
+				req->private_bio = NULL;
+				put_ldev(mdev);
+			}
+		}
+		remote = !local && mdev->state.pdsk >= D_UP_TO_DATE;
+	}
+
+	/* If we have a disk, but a READA request is mapped to remote,
+	 * we are R_PRIMARY, D_INCONSISTENT, SyncTarget.
+	 * Just fail that READA request right here.
+	 *
+	 * THINK: maybe fail all READA when not local?
+	 *        or make this configurable...
+	 *        if network is slow, READA won't do any good.
+	 */
+	if (rw == READA && mdev->state.disk >= D_INCONSISTENT && !local) {
+		err = -EWOULDBLOCK;
+		goto fail_and_free_req;
+	}
+
+	/* For WRITES going to the local disk, grab a reference on the target
+	 * extent.  This waits for any resync activity in the corresponding
+	 * resync extent to finish, and, if necessary, pulls in the target
+	 * extent into the activity log, which involves further disk io because
+	 * of transactional on-disk meta data updates. */
+	if (rw == WRITE && local)
+		drbd_al_begin_io(mdev, sector);
+
+	remote = remote && (mdev->state.pdsk == D_UP_TO_DATE ||
+			    (mdev->state.pdsk == D_INCONSISTENT &&
+			     mdev->state.conn >= C_CONNECTED));
+
+	if (!(local || remote)) {
+		dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
+		goto fail_free_complete;
+	}
+
+	/* For WRITE request, we have to make sure that we have an
+	 * unused_spare_tle, in case we need to start a new epoch.
+	 * I try to be smart and avoid to pre-allocate always "just in case",
+	 * but there is a race between testing the bit and pointer outside the
+	 * spinlock, and grabbing the spinlock.
+	 * if we lost that race, we retry.  */
+	if (rw == WRITE && remote &&
+	    mdev->unused_spare_tle == NULL &&
+	    test_bit(CREATE_BARRIER, &mdev->flags)) {
+allocate_barrier:
+		b = kmalloc(sizeof(struct drbd_tl_epoch), GFP_NOIO);
+		if (!b) {
+			dev_err(DEV, "Failed to alloc barrier.\n");
+			err = -ENOMEM;
+			goto fail_free_complete;
+		}
+	}
+
+	/* GOOD, everything prepared, grab the spin_lock */
+	spin_lock_irq(&mdev->req_lock);
+
+	if (remote) {
+		remote = (mdev->state.pdsk == D_UP_TO_DATE ||
+			    (mdev->state.pdsk == D_INCONSISTENT &&
+			     mdev->state.conn >= C_CONNECTED));
+		if (!remote)
+			dev_warn(DEV, "lost connection while grabbing the req_lock!\n");
+		if (!(local || remote)) {
+			dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
+			spin_unlock_irq(&mdev->req_lock);
+			goto fail_free_complete;
+		}
+	}
+
+	if (b && mdev->unused_spare_tle == NULL) {
+		mdev->unused_spare_tle = b;
+		b = NULL;
+	}
+	if (rw == WRITE && remote &&
+	    mdev->unused_spare_tle == NULL &&
+	    test_bit(CREATE_BARRIER, &mdev->flags)) {
+		/* someone closed the current epoch
+		 * while we were grabbing the spinlock */
+		spin_unlock_irq(&mdev->req_lock);
+		goto allocate_barrier;
+	}
+
+
+	/* Update disk stats */
+	_drbd_start_io_acct(mdev, req, bio);
+
+	/* _maybe_start_new_epoch(mdev);
+	 * If we need to generate a write barrier packet, we have to add the
+	 * new epoch (barrier) object, and queue the barrier packet for sending,
+	 * and queue the req's data after it _within the same lock_, otherwise
+	 * we have race conditions were the reorder domains could be mixed up.
+	 *
+	 * Even read requests may start a new epoch and queue the corresponding
+	 * barrier packet.  To get the write ordering right, we only have to
+	 * make sure that, if this is a write request and it triggered a
+	 * barrier packet, this request is queued within the same spinlock. */
+	if (remote && mdev->unused_spare_tle &&
+	    test_and_clear_bit(CREATE_BARRIER, &mdev->flags)) {
+		_tl_add_barrier(mdev, mdev->unused_spare_tle);
+		mdev->unused_spare_tle = NULL;
+	} else {
+		D_ASSERT(!(remote && rw == WRITE &&
+			   test_bit(CREATE_BARRIER, &mdev->flags)));
+	}
+
+	/* NOTE
+	 * Actually, 'local' may be wrong here already, since we may have failed
+	 * to write to the meta data, and may become wrong anytime because of
+	 * local io-error for some other request, which would lead to us
+	 * "detaching" the local disk.
+	 *
+	 * 'remote' may become wrong any time because the network could fail.
+	 *
+	 * This is a harmless race condition, though, since it is handled
+	 * correctly at the appropriate places; so it just defers the failure
+	 * of the respective operation.
+	 */
+
+	/* mark them early for readability.
+	 * this just sets some state flags. */
+	if (remote)
+		_req_mod(req, to_be_send);
+	if (local)
+		_req_mod(req, to_be_submitted);
+
+	/* check this request on the collision detection hash tables.
+	 * if we have a conflict, just complete it here.
+	 * THINK do we want to check reads, too? (I don't think so...) */
+	if (rw == WRITE && _req_conflicts(req)) {
+		/* this is a conflicting request.
+		 * even though it may have been only _partially_
+		 * overlapping with one of the currently pending requests,
+		 * without even submitting or sending it, we will
+		 * pretend that it was successfully served right now.
+		 */
+		if (local) {
+			bio_put(req->private_bio);
+			req->private_bio = NULL;
+			drbd_al_complete_io(mdev, req->sector);
+			put_ldev(mdev);
+			local = 0;
+		}
+		if (remote)
+			dec_ap_pending(mdev);
+		_drbd_end_io_acct(mdev, req);
+		/* THINK: do we want to fail it (-EIO), or pretend success? */
+		bio_endio(req->master_bio, 0);
+		req->master_bio = NULL;
+		dec_ap_bio(mdev);
+		drbd_req_free(req);
+		remote = 0;
+	}
+
+	/* NOTE remote first: to get the concurrent write detection right,
+	 * we must register the request before start of local IO.  */
+	if (remote) {
+		/* either WRITE and C_CONNECTED,
+		 * or READ, and no local disk,
+		 * or READ, but not in sync.
+		 */
+		_req_mod(req, (rw == WRITE)
+				? queue_for_net_write
+				: queue_for_net_read);
+	}
+	spin_unlock_irq(&mdev->req_lock);
+	kfree(b); /* if someone else has beaten us to it... */
+
+	if (local) {
+		req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
+
+		if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
+				     : rw == READ  ? DRBD_FAULT_DT_RD
+				     :               DRBD_FAULT_DT_RA))
+			bio_endio(req->private_bio, -EIO);
+		else
+			generic_make_request(req->private_bio);
+	}
+
+	/* we need to plug ALWAYS since we possibly need to kick lo_dev.
+	 * we plug after submit, so we won't miss an unplug event */
+	drbd_plug_device(mdev);
+
+	return 0;
+
+fail_free_complete:
+	if (rw == WRITE && local)
+		drbd_al_complete_io(mdev, sector);
+fail_and_free_req:
+	if (local) {
+		bio_put(req->private_bio);
+		req->private_bio = NULL;
+		put_ldev(mdev);
+	}
+	bio_endio(bio, err);
+	drbd_req_free(req);
+	dec_ap_bio(mdev);
+	kfree(b);
+
+	return 0;
+}
+
+/* helper function for drbd_make_request
+ * if we can determine just by the mdev (state) that this request will fail,
+ * return 1
+ * otherwise return 0
+ */
+static int drbd_fail_request_early(struct drbd_conf *mdev, int is_write)
+{
+	/* Unconfigured */
+	if (mdev->state.conn == C_DISCONNECTING &&
+	    mdev->state.disk == D_DISKLESS)
+		return 1;
+
+	if (mdev->state.role != R_PRIMARY &&
+		(!allow_oos || is_write)) {
+		if (__ratelimit(&drbd_ratelimit_state)) {
+			dev_err(DEV, "Process %s[%u] tried to %s; "
+			    "since we are not in Primary state, "
+			    "we cannot allow this\n",
+			    current->comm, current->pid,
+			    is_write ? "WRITE" : "READ");
+		}
+		return 1;
+	}
+
+	/*
+	 * Paranoia: we might have been primary, but sync target, or
+	 * even diskless, then lost the connection.
+	 * This should have been handled (panic? suspend?) somewhere
+	 * else. But maybe it was not, so check again here.
+	 * Caution: as long as we do not have a read/write lock on mdev,
+	 * to serialize state changes, this is racy, since we may lose
+	 * the connection *after* we test for the cstate.
+	 */
+	if (mdev->state.disk < D_UP_TO_DATE && mdev->state.pdsk < D_UP_TO_DATE) {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Sorry, I have no access to good data anymore.\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+int drbd_make_request_26(struct request_queue *q, struct bio *bio)
+{
+	unsigned int s_enr, e_enr;
+	struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata;
+
+	if (drbd_fail_request_early(mdev, bio_data_dir(bio) & WRITE)) {
+		bio_endio(bio, -EPERM);
+		return 0;
+	}
+
+	/* Reject barrier requests if we know the underlying device does
+	 * not support them.
+	 * XXX: Need to get this info from peer as well some how so we
+	 * XXX: reject if EITHER side/data/metadata area does not support them.
+	 *
+	 * because of those XXX, this is not yet enabled,
+	 * i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
+	 */
+	if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags))) {
+		/* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
+		bio_endio(bio, -EOPNOTSUPP);
+		return 0;
+	}
+
+	/*
+	 * what we "blindly" assume:
+	 */
+	D_ASSERT(bio->bi_size > 0);
+	D_ASSERT((bio->bi_size & 0x1ff) == 0);
+	D_ASSERT(bio->bi_idx == 0);
+
+	/* to make some things easier, force alignment of requests within the
+	 * granularity of our hash tables */
+	s_enr = bio->bi_sector >> HT_SHIFT;
+	e_enr = (bio->bi_sector+(bio->bi_size>>9)-1) >> HT_SHIFT;
+
+	if (likely(s_enr == e_enr)) {
+		inc_ap_bio(mdev, 1);
+		return drbd_make_request_common(mdev, bio);
+	}
+
+	/* can this bio be split generically?
+	 * Maybe add our own split-arbitrary-bios function. */
+	if (bio->bi_vcnt != 1 || bio->bi_idx != 0 || bio->bi_size > DRBD_MAX_SEGMENT_SIZE) {
+		/* rather error out here than BUG in bio_split */
+		dev_err(DEV, "bio would need to, but cannot, be split: "
+		    "(vcnt=%u,idx=%u,size=%u,sector=%llu)\n",
+		    bio->bi_vcnt, bio->bi_idx, bio->bi_size,
+		    (unsigned long long)bio->bi_sector);
+		bio_endio(bio, -EINVAL);
+	} else {
+		/* This bio crosses some boundary, so we have to split it. */
+		struct bio_pair *bp;
+		/* works for the "do not cross hash slot boundaries" case
+		 * e.g. sector 262269, size 4096
+		 * s_enr = 262269 >> 6 = 4097
+		 * e_enr = (262269+8-1) >> 6 = 4098
+		 * HT_SHIFT = 6
+		 * sps = 64, mask = 63
+		 * first_sectors = 64 - (262269 & 63) = 3
+		 */
+		const sector_t sect = bio->bi_sector;
+		const int sps = 1 << HT_SHIFT; /* sectors per slot */
+		const int mask = sps - 1;
+		const sector_t first_sectors = sps - (sect & mask);
+		bp = bio_split(bio,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
+				bio_split_pool,
+#endif
+				first_sectors);
+
+		/* we need to get a "reference count" (ap_bio_cnt)
+		 * to avoid races with the disconnect/reconnect/suspend code.
+		 * In case we need to split the bio here, we need to get two references
+		 * atomically, otherwise we might deadlock when trying to submit the
+		 * second one! */
+		inc_ap_bio(mdev, 2);
+
+		D_ASSERT(e_enr == s_enr + 1);
+
+		drbd_make_request_common(mdev, &bp->bio1);
+		drbd_make_request_common(mdev, &bp->bio2);
+		bio_pair_release(bp);
+	}
+	return 0;
+}
+
+/* This is called by bio_add_page().  With this function we reduce
+ * the number of BIOs that span over multiple DRBD_MAX_SEGMENT_SIZEs
+ * units (was AL_EXTENTs).
+ *
+ * we do the calculation within the lower 32bit of the byte offsets,
+ * since we don't care for actual offset, but only check whether it
+ * would cross "activity log extent" boundaries.
+ *
+ * As long as the BIO is empty we have to allow at least one bvec,
+ * regardless of size and offset.  so the resulting bio may still
+ * cross extent boundaries.  those are dealt with (bio_split) in
+ * drbd_make_request_26.
+ */
+int drbd_merge_bvec(struct request_queue *q, struct bvec_merge_data *bvm, struct bio_vec *bvec)
+{
+	struct drbd_conf *mdev = (struct drbd_conf *) q->queuedata;
+	unsigned int bio_offset =
+		(unsigned int)bvm->bi_sector << 9; /* 32 bit */
+	unsigned int bio_size = bvm->bi_size;
+	int limit, backing_limit;
+
+	limit = DRBD_MAX_SEGMENT_SIZE
+	      - ((bio_offset & (DRBD_MAX_SEGMENT_SIZE-1)) + bio_size);
+	if (limit < 0)
+		limit = 0;
+	if (bio_size == 0) {
+		if (limit <= bvec->bv_len)
+			limit = bvec->bv_len;
+	} else if (limit && get_ldev(mdev)) {
+		struct request_queue * const b =
+			mdev->ldev->backing_bdev->bd_disk->queue;
+		if (b->merge_bvec_fn && mdev->ldev->dc.use_bmbv) {
+			backing_limit = b->merge_bvec_fn(b, bvm, bvec);
+			limit = min(limit, backing_limit);
+		}
+		put_ldev(mdev);
+	}
+	return limit;
+}
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
new file mode 100644
index 0000000..f22c1bc
--- /dev/null
+++ b/drivers/block/drbd/drbd_req.h
@@ -0,0 +1,326 @@
+/*
+   drbd_req.h
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2006-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2006-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+   Copyright (C) 2006-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+
+   DRBD is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   DRBD is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DRBD_REQ_H
+#define _DRBD_REQ_H
+
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/drbd.h>
+#include "drbd_int.h"
+#include "drbd_wrappers.h"
+
+/* The request callbacks will be called in irq context by the IDE drivers,
+   and in Softirqs/Tasklets/BH context by the SCSI drivers,
+   and by the receiver and worker in kernel-thread context.
+   Try to get the locking right :) */
+
+/*
+ * Objects of type struct drbd_request do only exist on a R_PRIMARY node, and are
+ * associated with IO requests originating from the block layer above us.
+ *
+ * There are quite a few things that may happen to a drbd request
+ * during its lifetime.
+ *
+ *  It will be created.
+ *  It will be marked with the intention to be
+ *    submitted to local disk and/or
+ *    send via the network.
+ *
+ *  It has to be placed on the transfer log and other housekeeping lists,
+ *  In case we have a network connection.
+ *
+ *  It may be identified as a concurrent (write) request
+ *    and be handled accordingly.
+ *
+ *  It may me handed over to the local disk subsystem.
+ *  It may be completed by the local disk subsystem,
+ *    either sucessfully or with io-error.
+ *  In case it is a READ request, and it failed locally,
+ *    it may be retried remotely.
+ *
+ *  It may be queued for sending.
+ *  It may be handed over to the network stack,
+ *    which may fail.
+ *  It may be acknowledged by the "peer" according to the wire_protocol in use.
+ *    this may be a negative ack.
+ *  It may receive a faked ack when the network connection is lost and the
+ *  transfer log is cleaned up.
+ *  Sending may be canceled due to network connection loss.
+ *  When it finally has outlived its time,
+ *    corresponding dirty bits in the resync-bitmap may be cleared or set,
+ *    it will be destroyed,
+ *    and completion will be signalled to the originator,
+ *      with or without "success".
+ */
+
+enum drbd_req_event {
+	created,
+	to_be_send,
+	to_be_submitted,
+
+	/* XXX yes, now I am inconsistent...
+	 * these two are not "events" but "actions"
+	 * oh, well... */
+	queue_for_net_write,
+	queue_for_net_read,
+
+	send_canceled,
+	send_failed,
+	handed_over_to_network,
+	connection_lost_while_pending,
+	recv_acked_by_peer,
+	write_acked_by_peer,
+	write_acked_by_peer_and_sis, /* and set_in_sync */
+	conflict_discarded_by_peer,
+	neg_acked,
+	barrier_acked, /* in protocol A and B */
+	data_received, /* (remote read) */
+
+	read_completed_with_error,
+	read_ahead_completed_with_error,
+	write_completed_with_error,
+	completed_ok,
+	nothing, /* for tracing only */
+};
+
+/* encoding of request states for now.  we don't actually need that many bits.
+ * we don't need to do atomic bit operations either, since most of the time we
+ * need to look at the connection state and/or manipulate some lists at the
+ * same time, so we should hold the request lock anyways.
+ */
+enum drbd_req_state_bits {
+	/* 210
+	 * 000: no local possible
+	 * 001: to be submitted
+	 *    UNUSED, we could map: 011: submitted, completion still pending
+	 * 110: completed ok
+	 * 010: completed with error
+	 */
+	__RQ_LOCAL_PENDING,
+	__RQ_LOCAL_COMPLETED,
+	__RQ_LOCAL_OK,
+
+	/* 76543
+	 * 00000: no network possible
+	 * 00001: to be send
+	 * 00011: to be send, on worker queue
+	 * 00101: sent, expecting recv_ack (B) or write_ack (C)
+	 * 11101: sent,
+	 *        recv_ack (B) or implicit "ack" (A),
+	 *        still waiting for the barrier ack.
+	 *        master_bio may already be completed and invalidated.
+	 * 11100: write_acked (C),
+	 *        data_received (for remote read, any protocol)
+	 *        or finally the barrier ack has arrived (B,A)...
+	 *        request can be freed
+	 * 01100: neg-acked (write, protocol C)
+	 *        or neg-d-acked (read, any protocol)
+	 *        or killed from the transfer log
+	 *        during cleanup after connection loss
+	 *        request can be freed
+	 * 01000: canceled or send failed...
+	 *        request can be freed
+	 */
+
+	/* if "SENT" is not set, yet, this can still fail or be canceled.
+	 * if "SENT" is set already, we still wait for an Ack packet.
+	 * when cleared, the master_bio may be completed.
+	 * in (B,A) the request object may still linger on the transaction log
+	 * until the corresponding barrier ack comes in */
+	__RQ_NET_PENDING,
+
+	/* If it is QUEUED, and it is a WRITE, it is also registered in the
+	 * transfer log. Currently we need this flag to avoid conflicts between
+	 * worker canceling the request and tl_clear_barrier killing it from
+	 * transfer log.  We should restructure the code so this conflict does
+	 * no longer occur. */
+	__RQ_NET_QUEUED,
+
+	/* well, actually only "handed over to the network stack".
+	 *
+	 * TODO can potentially be dropped because of the similar meaning
+	 * of RQ_NET_SENT and ~RQ_NET_QUEUED.
+	 * however it is not exactly the same. before we drop it
+	 * we must ensure that we can tell a request with network part
+	 * from a request without, regardless of what happens to it. */
+	__RQ_NET_SENT,
+
+	/* when set, the request may be freed (if RQ_NET_QUEUED is clear).
+	 * basically this means the corresponding P_BARRIER_ACK was received */
+	__RQ_NET_DONE,
+
+	/* whether or not we know (C) or pretend (B,A) that the write
+	 * was successfully written on the peer.
+	 */
+	__RQ_NET_OK,
+
+	/* peer called drbd_set_in_sync() for this write */
+	__RQ_NET_SIS,
+
+	/* keep this last, its for the RQ_NET_MASK */
+	__RQ_NET_MAX,
+};
+
+#define RQ_LOCAL_PENDING   (1UL << __RQ_LOCAL_PENDING)
+#define RQ_LOCAL_COMPLETED (1UL << __RQ_LOCAL_COMPLETED)
+#define RQ_LOCAL_OK        (1UL << __RQ_LOCAL_OK)
+
+#define RQ_LOCAL_MASK      ((RQ_LOCAL_OK << 1)-1) /* 0x07 */
+
+#define RQ_NET_PENDING     (1UL << __RQ_NET_PENDING)
+#define RQ_NET_QUEUED      (1UL << __RQ_NET_QUEUED)
+#define RQ_NET_SENT        (1UL << __RQ_NET_SENT)
+#define RQ_NET_DONE        (1UL << __RQ_NET_DONE)
+#define RQ_NET_OK          (1UL << __RQ_NET_OK)
+#define RQ_NET_SIS         (1UL << __RQ_NET_SIS)
+
+/* 0x1f8 */
+#define RQ_NET_MASK        (((1UL << __RQ_NET_MAX)-1) & ~RQ_LOCAL_MASK)
+
+/* epoch entries */
+static inline
+struct hlist_head *ee_hash_slot(struct drbd_conf *mdev, sector_t sector)
+{
+	BUG_ON(mdev->ee_hash_s == 0);
+	return mdev->ee_hash +
+		((unsigned int)(sector>>HT_SHIFT) % mdev->ee_hash_s);
+}
+
+/* transfer log (drbd_request objects) */
+static inline
+struct hlist_head *tl_hash_slot(struct drbd_conf *mdev, sector_t sector)
+{
+	BUG_ON(mdev->tl_hash_s == 0);
+	return mdev->tl_hash +
+		((unsigned int)(sector>>HT_SHIFT) % mdev->tl_hash_s);
+}
+
+/* application reads (drbd_request objects) */
+static struct hlist_head *ar_hash_slot(struct drbd_conf *mdev, sector_t sector)
+{
+	return mdev->app_reads_hash
+		+ ((unsigned int)(sector) % APP_R_HSIZE);
+}
+
+/* when we receive the answer for a read request,
+ * verify that we actually know about it */
+static inline struct drbd_request *_ar_id_to_req(struct drbd_conf *mdev,
+	u64 id, sector_t sector)
+{
+	struct hlist_head *slot = ar_hash_slot(mdev, sector);
+	struct hlist_node *n;
+	struct drbd_request *req;
+
+	hlist_for_each_entry(req, n, slot, colision) {
+		if ((unsigned long)req == (unsigned long)id) {
+			D_ASSERT(req->sector == sector);
+			return req;
+		}
+	}
+	return NULL;
+}
+
+static inline struct drbd_request *drbd_req_new(struct drbd_conf *mdev,
+	struct bio *bio_src)
+{
+	struct bio *bio;
+	struct drbd_request *req =
+		mempool_alloc(drbd_request_mempool, GFP_NOIO);
+	if (likely(req)) {
+		bio = bio_clone(bio_src, GFP_NOIO); /* XXX cannot fail?? */
+
+		req->rq_state    = 0;
+		req->mdev        = mdev;
+		req->master_bio  = bio_src;
+		req->private_bio = bio;
+		req->epoch       = 0;
+		req->sector      = bio->bi_sector;
+		req->size        = bio->bi_size;
+		req->start_time  = jiffies;
+		INIT_HLIST_NODE(&req->colision);
+		INIT_LIST_HEAD(&req->tl_requests);
+		INIT_LIST_HEAD(&req->w.list);
+
+		bio->bi_private  = req;
+		bio->bi_end_io   = drbd_endio_pri;
+		bio->bi_next     = NULL;
+	}
+	return req;
+}
+
+static inline void drbd_req_free(struct drbd_request *req)
+{
+	mempool_free(req, drbd_request_mempool);
+}
+
+static inline int overlaps(sector_t s1, int l1, sector_t s2, int l2)
+{
+	return !((s1 + (l1>>9) <= s2) || (s1 >= s2 + (l2>>9)));
+}
+
+/* Short lived temporary struct on the stack.
+ * We could squirrel the error to be returned into
+ * bio->bi_size, or similar. But that would be too ugly. */
+struct bio_and_error {
+	struct bio *bio;
+	int error;
+};
+
+extern void _req_may_be_done(struct drbd_request *req,
+		struct bio_and_error *m);
+extern void __req_mod(struct drbd_request *req, enum drbd_req_event what,
+		struct bio_and_error *m);
+extern void complete_master_bio(struct drbd_conf *mdev,
+		struct bio_and_error *m);
+
+/* use this if you don't want to deal with calling complete_master_bio()
+ * outside the spinlock, e.g. when walking some list on cleanup. */
+static inline void _req_mod(struct drbd_request *req, enum drbd_req_event what)
+{
+	struct drbd_conf *mdev = req->mdev;
+	struct bio_and_error m;
+
+	/* __req_mod possibly frees req, do not touch req after that! */
+	__req_mod(req, what, &m);
+	if (m.bio)
+		complete_master_bio(mdev, &m);
+}
+
+/* completion of master bio is outside of spinlock.
+ * If you need it irqsave, do it your self! */
+static inline void req_mod(struct drbd_request *req,
+		enum drbd_req_event what)
+{
+	struct drbd_conf *mdev = req->mdev;
+	struct bio_and_error m;
+	spin_lock_irq(&mdev->req_lock);
+	__req_mod(req, what, &m);
+	spin_unlock_irq(&mdev->req_lock);
+
+	if (m.bio)
+		complete_master_bio(mdev, &m);
+}
+#endif
diff --git a/drivers/block/drbd/drbd_strings.c b/drivers/block/drbd/drbd_strings.c
new file mode 100644
index 0000000..76863e3
--- /dev/null
+++ b/drivers/block/drbd/drbd_strings.c
@@ -0,0 +1,113 @@
+/*
+  drbd.h
+
+  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+  Copyright (C) 2003-2008, LINBIT Information Technologies GmbH.
+  Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+  Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+  drbd is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2, or (at your option)
+  any later version.
+
+  drbd is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with drbd; see the file COPYING.  If not, write to
+  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/drbd.h>
+
+static const char *drbd_conn_s_names[] = {
+	[C_STANDALONE]       = "StandAlone",
+	[C_DISCONNECTING]    = "Disconnecting",
+	[C_UNCONNECTED]      = "Unconnected",
+	[C_TIMEOUT]          = "Timeout",
+	[C_BROKEN_PIPE]      = "BrokenPipe",
+	[C_NETWORK_FAILURE]  = "NetworkFailure",
+	[C_PROTOCOL_ERROR]   = "ProtocolError",
+	[C_WF_CONNECTION]    = "WFConnection",
+	[C_WF_REPORT_PARAMS] = "WFReportParams",
+	[C_TEAR_DOWN]        = "TearDown",
+	[C_CONNECTED]        = "Connected",
+	[C_STARTING_SYNC_S]  = "StartingSyncS",
+	[C_STARTING_SYNC_T]  = "StartingSyncT",
+	[C_WF_BITMAP_S]      = "WFBitMapS",
+	[C_WF_BITMAP_T]      = "WFBitMapT",
+	[C_WF_SYNC_UUID]     = "WFSyncUUID",
+	[C_SYNC_SOURCE]      = "SyncSource",
+	[C_SYNC_TARGET]      = "SyncTarget",
+	[C_PAUSED_SYNC_S]    = "PausedSyncS",
+	[C_PAUSED_SYNC_T]    = "PausedSyncT",
+	[C_VERIFY_S]         = "VerifyS",
+	[C_VERIFY_T]         = "VerifyT",
+};
+
+static const char *drbd_role_s_names[] = {
+	[R_PRIMARY]   = "Primary",
+	[R_SECONDARY] = "Secondary",
+	[R_UNKNOWN]   = "Unknown"
+};
+
+static const char *drbd_disk_s_names[] = {
+	[D_DISKLESS]     = "Diskless",
+	[D_ATTACHING]    = "Attaching",
+	[D_FAILED]       = "Failed",
+	[D_NEGOTIATING]  = "Negotiating",
+	[D_INCONSISTENT] = "Inconsistent",
+	[D_OUTDATED]     = "Outdated",
+	[D_UNKNOWN]      = "DUnknown",
+	[D_CONSISTENT]   = "Consistent",
+	[D_UP_TO_DATE]   = "UpToDate",
+};
+
+static const char *drbd_state_sw_errors[] = {
+	[-SS_TWO_PRIMARIES] = "Multiple primaries not allowed by config",
+	[-SS_NO_UP_TO_DATE_DISK] = "Refusing to be Primary without at least one UpToDate disk",
+	[-SS_NO_LOCAL_DISK] = "Can not resync without local disk",
+	[-SS_NO_REMOTE_DISK] = "Can not resync without remote disk",
+	[-SS_CONNECTED_OUTDATES] = "Refusing to be Outdated while Connected",
+	[-SS_PRIMARY_NOP] = "Refusing to be Primary while peer is not outdated",
+	[-SS_RESYNC_RUNNING] = "Can not start OV/resync since it is already active",
+	[-SS_ALREADY_STANDALONE] = "Can not disconnect a StandAlone device",
+	[-SS_CW_FAILED_BY_PEER] = "State change was refused by peer node",
+	[-SS_IS_DISKLESS] = "Device is diskless, the requested operation requires a disk",
+	[-SS_DEVICE_IN_USE] = "Device is held open by someone",
+	[-SS_NO_NET_CONFIG] = "Have no net/connection configuration",
+	[-SS_NO_VERIFY_ALG] = "Need a verify algorithm to start online verify",
+	[-SS_NEED_CONNECTION] = "Need a connection to start verify or resync",
+	[-SS_NOT_SUPPORTED] = "Peer does not support protocol",
+	[-SS_LOWER_THAN_OUTDATED] = "Disk state is lower than outdated",
+	[-SS_IN_TRANSIENT_STATE] = "In transient state, retry after next state change",
+	[-SS_CONCURRENT_ST_CHG] = "Concurrent state changes detected and aborted",
+};
+
+const char *drbd_conn_str(enum drbd_conns s)
+{
+	/* enums are unsigned... */
+	return s > C_PAUSED_SYNC_T ? "TOO_LARGE" : drbd_conn_s_names[s];
+}
+
+const char *drbd_role_str(enum drbd_role s)
+{
+	return s > R_SECONDARY   ? "TOO_LARGE" : drbd_role_s_names[s];
+}
+
+const char *drbd_disk_str(enum drbd_disk_state s)
+{
+	return s > D_UP_TO_DATE    ? "TOO_LARGE" : drbd_disk_s_names[s];
+}
+
+const char *drbd_set_st_err_str(enum drbd_state_ret_codes err)
+{
+	return err <= SS_AFTER_LAST_ERROR ? "TOO_SMALL" :
+	       err > SS_TWO_PRIMARIES ? "TOO_LARGE"
+			: drbd_state_sw_errors[-err];
+}
diff --git a/drivers/block/drbd/drbd_vli.h b/drivers/block/drbd/drbd_vli.h
new file mode 100644
index 0000000..fc82400
--- /dev/null
+++ b/drivers/block/drbd/drbd_vli.h
@@ -0,0 +1,351 @@
+/*
+-*- linux-c -*-
+   drbd_receiver.c
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _DRBD_VLI_H
+#define _DRBD_VLI_H
+
+/*
+ * At a granularity of 4KiB storage represented per bit,
+ * and stroage sizes of several TiB,
+ * and possibly small-bandwidth replication,
+ * the bitmap transfer time can take much too long,
+ * if transmitted in plain text.
+ *
+ * We try to reduce the transfered bitmap information
+ * by encoding runlengths of bit polarity.
+ *
+ * We never actually need to encode a "zero" (runlengths are positive).
+ * But then we have to store the value of the first bit.
+ * The first bit of information thus shall encode if the first runlength
+ * gives the number of set or unset bits.
+ *
+ * We assume that large areas are either completely set or unset,
+ * which gives good compression with any runlength method,
+ * even when encoding the runlength as fixed size 32bit/64bit integers.
+ *
+ * Still, there may be areas where the polarity flips every few bits,
+ * and encoding the runlength sequence of those areas with fix size
+ * integers would be much worse than plaintext.
+ *
+ * We want to encode small runlength values with minimum code length,
+ * while still being able to encode a Huge run of all zeros.
+ *
+ * Thus we need a Variable Length Integer encoding, VLI.
+ *
+ * For some cases, we produce more code bits than plaintext input.
+ * We need to send incompressible chunks as plaintext, skip over them
+ * and then see if the next chunk compresses better.
+ *
+ * We don't care too much about "excellent" compression ratio for large
+ * runlengths (all set/all clear): whether we achieve a factor of 100
+ * or 1000 is not that much of an issue.
+ * We do not want to waste too much on short runlengths in the "noisy"
+ * parts of the bitmap, though.
+ *
+ * There are endless variants of VLI, we experimented with:
+ *  * simple byte-based
+ *  * various bit based with different code word length.
+ *
+ * To avoid yet an other configuration parameter (choice of bitmap compression
+ * algorithm) which was difficult to explain and tune, we just chose the one
+ * variant that turned out best in all test cases.
+ * Based on real world usage patterns, with device sizes ranging from a few GiB
+ * to several TiB, file server/mailserver/webserver/mysql/postgress,
+ * mostly idle to really busy, the all time winner (though sometimes only
+ * marginally better) is:
+ */
+
+/*
+ * encoding is "visualised" as
+ * __little endian__ bitstream, least significant bit first (left most)
+ *
+ * this particular encoding is chosen so that the prefix code
+ * starts as unary encoding the level, then modified so that
+ * 10 levels can be described in 8bit, with minimal overhead
+ * for the smaller levels.
+ *
+ * Number of data bits follow fibonacci sequence, with the exception of the
+ * last level (+1 data bit, so it makes 64bit total).  The only worse code when
+ * encoding bit polarity runlength is 1 plain bits => 2 code bits.
+prefix    data bits                                    max val  Nº data bits
+0 x                                                         0x2            1
+10 x                                                        0x4            1
+110 xx                                                      0x8            2
+1110 xxx                                                   0x10            3
+11110 xxx xx                                               0x30            5
+111110 xx xxxxxx                                          0x130            8
+11111100  xxxxxxxx xxxxx                                 0x2130           13
+11111110  xxxxxxxx xxxxxxxx xxxxx                      0x202130           21
+11111101  xxxxxxxx xxxxxxxx xxxxxxxx  xxxxxxxx xx   0x400202130           34
+11111111  xxxxxxxx xxxxxxxx xxxxxxxx  xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx 56
+ * maximum encodable value: 0x100000400202130 == 2**56 + some */
+
+/* compression "table":
+ transmitted   x                                0.29
+ as plaintext x                                  ........................
+             x                                   ........................
+            x                                    ........................
+           x    0.59                         0.21........................
+          x      ........................................................
+         x       .. c ...................................................
+        x    0.44.. o ...................................................
+       x .......... d ...................................................
+      x  .......... e ...................................................
+     X.............   ...................................................
+    x.............. b ...................................................
+2.0x............... i ...................................................
+ #X................ t ...................................................
+ #................. s ...........................  plain bits  ..........
+-+-----------------------------------------------------------------------
+ 1             16              32                              64
+*/
+
+/* LEVEL: (total bits, prefix bits, prefix value),
+ * sorted ascending by number of total bits.
+ * The rest of the code table is calculated at compiletime from this. */
+
+/* fibonacci data 1, 1, ... */
+#define VLI_L_1_1() do { \
+	LEVEL( 2, 1, 0x00); \
+	LEVEL( 3, 2, 0x01); \
+	LEVEL( 5, 3, 0x03); \
+	LEVEL( 7, 4, 0x07); \
+	LEVEL(10, 5, 0x0f); \
+	LEVEL(14, 6, 0x1f); \
+	LEVEL(21, 8, 0x3f); \
+	LEVEL(29, 8, 0x7f); \
+	LEVEL(42, 8, 0xbf); \
+	LEVEL(64, 8, 0xff); \
+	} while (0)
+
+/* finds a suitable level to decode the least significant part of in.
+ * returns number of bits consumed.
+ *
+ * BUG() for bad input, as that would mean a buggy code table. */
+static inline int vli_decode_bits(u64 *out, const u64 in)
+{
+	u64 adj = 1;
+
+#define LEVEL(t,b,v)					\
+	do {						\
+		if ((in & ((1 << b) -1)) == v) {	\
+			*out = ((in & ((~0ULL) >> (64-t))) >> b) + adj;	\
+			return t;			\
+		}					\
+		adj += 1ULL << (t - b);			\
+	} while (0)
+
+	VLI_L_1_1();
+
+	/* NOT REACHED, if VLI_LEVELS code table is defined properly */
+	BUG();
+#undef LEVEL
+}
+
+/* return number of code bits needed,
+ * or negative error number */
+static inline int __vli_encode_bits(u64 *out, const u64 in)
+{
+	u64 max = 0;
+	u64 adj = 1;
+
+	if (in == 0)
+		return -EINVAL;
+
+#define LEVEL(t,b,v) do {		\
+		max += 1ULL << (t - b);	\
+		if (in <= max) {	\
+			if (out)	\
+				*out = ((in - adj) << b) | v;	\
+			return t;	\
+		}			\
+		adj = max + 1;		\
+	} while (0)
+
+	VLI_L_1_1();
+
+	return -EOVERFLOW;
+#undef LEVEL
+}
+
+#undef VLI_L_1_1
+
+/* code from here down is independend of actually used bit code */
+
+/*
+ * Code length is determined by some unique (e.g. unary) prefix.
+ * This encodes arbitrary bit length, not whole bytes: we have a bit-stream,
+ * not a byte stream.
+ */
+
+/* for the bitstream, we need a cursor */
+struct bitstream_cursor {
+	/* the current byte */
+	u8 *b;
+	/* the current bit within *b, nomalized: 0..7 */
+	unsigned int bit;
+};
+
+/* initialize cursor to point to first bit of stream */
+static inline void bitstream_cursor_reset(struct bitstream_cursor *cur, void *s)
+{
+	cur->b = s;
+	cur->bit = 0;
+}
+
+/* advance cursor by that many bits; maximum expected input value: 64,
+ * but depending on VLI implementation, it may be more. */
+static inline void bitstream_cursor_advance(struct bitstream_cursor *cur, unsigned int bits)
+{
+	bits += cur->bit;
+	cur->b = cur->b + (bits >> 3);
+	cur->bit = bits & 7;
+}
+
+/* the bitstream itself knows its length */
+struct bitstream {
+	struct bitstream_cursor cur;
+	unsigned char *buf;
+	size_t buf_len;		/* in bytes */
+
+	/* for input stream:
+	 * number of trailing 0 bits for padding
+	 * total number of valid bits in stream: buf_len * 8 - pad_bits */
+	unsigned int pad_bits;
+};
+
+static inline void bitstream_init(struct bitstream *bs, void *s, size_t len, unsigned int pad_bits)
+{
+	bs->buf = s;
+	bs->buf_len = len;
+	bs->pad_bits = pad_bits;
+	bitstream_cursor_reset(&bs->cur, bs->buf);
+}
+
+static inline void bitstream_rewind(struct bitstream *bs)
+{
+	bitstream_cursor_reset(&bs->cur, bs->buf);
+	memset(bs->buf, 0, bs->buf_len);
+}
+
+/* Put (at most 64) least significant bits of val into bitstream, and advance cursor.
+ * Ignores "pad_bits".
+ * Returns zero if bits == 0 (nothing to do).
+ * Returns number of bits used if successful.
+ *
+ * If there is not enough room left in bitstream,
+ * leaves bitstream unchanged and returns -ENOBUFS.
+ */
+static inline int bitstream_put_bits(struct bitstream *bs, u64 val, const unsigned int bits)
+{
+	unsigned char *b = bs->cur.b;
+	unsigned int tmp;
+
+	if (bits == 0)
+		return 0;
+
+	if ((bs->cur.b + ((bs->cur.bit + bits -1) >> 3)) - bs->buf >= bs->buf_len)
+		return -ENOBUFS;
+
+	/* paranoia: strip off hi bits; they should not be set anyways. */
+	if (bits < 64)
+		val &= ~0ULL >> (64 - bits);
+
+	*b++ |= (val & 0xff) << bs->cur.bit;
+
+	for (tmp = 8 - bs->cur.bit; tmp < bits; tmp += 8)
+		*b++ |= (val >> tmp) & 0xff;
+
+	bitstream_cursor_advance(&bs->cur, bits);
+	return bits;
+}
+
+/* Fetch (at most 64) bits from bitstream into *out, and advance cursor.
+ *
+ * If more than 64 bits are requested, returns -EINVAL and leave *out unchanged.
+ *
+ * If there are less than the requested number of valid bits left in the
+ * bitstream, still fetches all available bits.
+ *
+ * Returns number of actually fetched bits.
+ */
+static inline int bitstream_get_bits(struct bitstream *bs, u64 *out, int bits)
+{
+	u64 val;
+	unsigned int n;
+
+	if (bits > 64)
+		return -EINVAL;
+
+	if (bs->cur.b + ((bs->cur.bit + bs->pad_bits + bits -1) >> 3) - bs->buf >= bs->buf_len)
+		bits = ((bs->buf_len - (bs->cur.b - bs->buf)) << 3)
+			- bs->cur.bit - bs->pad_bits;
+
+	if (bits == 0) {
+		*out = 0;
+		return 0;
+	}
+
+	/* get the high bits */
+	val = 0;
+	n = (bs->cur.bit + bits + 7) >> 3;
+	/* n may be at most 9, if cur.bit + bits > 64 */
+	/* which means this copies at most 8 byte */
+	if (n) {
+		memcpy(&val, bs->cur.b+1, n - 1);
+		val = le64_to_cpu(val) << (8 - bs->cur.bit);
+	}
+
+	/* we still need the low bits */
+	val |= bs->cur.b[0] >> bs->cur.bit;
+
+	/* and mask out bits we don't want */
+	val &= ~0ULL >> (64 - bits);
+
+	bitstream_cursor_advance(&bs->cur, bits);
+	*out = val;
+
+	return bits;
+}
+
+/* encodes @in as vli into @bs;
+
+ * return values
+ *  > 0: number of bits successfully stored in bitstream
+ * -ENOBUFS @bs is full
+ * -EINVAL input zero (invalid)
+ * -EOVERFLOW input too large for this vli code (invalid)
+ */
+static inline int vli_encode_bits(struct bitstream *bs, u64 in)
+{
+	u64 code = code;
+	int bits = __vli_encode_bits(&code, in);
+
+	if (bits <= 0)
+		return bits;
+
+	return bitstream_put_bits(bs, code, bits);
+}
+
+#endif
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
new file mode 100644
index 0000000..ed8796f
--- /dev/null
+++ b/drivers/block/drbd/drbd_worker.c
@@ -0,0 +1,1512 @@
+/*
+   drbd_worker.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 1999-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2002-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/drbd.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/wait.h>
+#include <linux/mm.h>
+#include <linux/memcontrol.h>
+#include <linux/mm_inline.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/scatterlist.h>
+
+#include "drbd_int.h"
+#include "drbd_req.h"
+
+#define SLEEP_TIME (HZ/10)
+
+static int w_make_ov_request(struct drbd_conf *mdev, struct drbd_work *w, int cancel);
+
+
+
+/* defined here:
+   drbd_md_io_complete
+   drbd_endio_write_sec
+   drbd_endio_read_sec
+   drbd_endio_pri
+
+ * more endio handlers:
+   atodb_endio in drbd_actlog.c
+   drbd_bm_async_io_complete in drbd_bitmap.c
+
+ * For all these callbacks, note the following:
+ * The callbacks will be called in irq context by the IDE drivers,
+ * and in Softirqs/Tasklets/BH context by the SCSI drivers.
+ * Try to get the locking right :)
+ *
+ */
+
+
+/* About the global_state_lock
+   Each state transition on an device holds a read lock. In case we have
+   to evaluate the sync after dependencies, we grab a write lock, because
+   we need stable states on all devices for that.  */
+rwlock_t global_state_lock;
+
+/* used for synchronous meta data and bitmap IO
+ * submitted by drbd_md_sync_page_io()
+ */
+void drbd_md_io_complete(struct bio *bio, int error)
+{
+	struct drbd_md_io *md_io;
+
+	md_io = (struct drbd_md_io *)bio->bi_private;
+	md_io->error = error;
+
+	complete(&md_io->event);
+}
+
+/* reads on behalf of the partner,
+ * "submitted" by the receiver
+ */
+void drbd_endio_read_sec(struct bio *bio, int error) __releases(local)
+{
+	unsigned long flags = 0;
+	struct drbd_epoch_entry *e = NULL;
+	struct drbd_conf *mdev;
+	int uptodate = bio_flagged(bio, BIO_UPTODATE);
+
+	e = bio->bi_private;
+	mdev = e->mdev;
+
+	if (error)
+		dev_warn(DEV, "read: error=%d s=%llus\n", error,
+				(unsigned long long)e->sector);
+	if (!error && !uptodate) {
+		dev_warn(DEV, "read: setting error to -EIO s=%llus\n",
+				(unsigned long long)e->sector);
+		/* strange behavior of some lower level drivers...
+		 * fail the request by clearing the uptodate flag,
+		 * but do not return any error?! */
+		error = -EIO;
+	}
+
+	D_ASSERT(e->block_id != ID_VACANT);
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	mdev->read_cnt += e->size >> 9;
+	list_del(&e->w.list);
+	if (list_empty(&mdev->read_ee))
+		wake_up(&mdev->ee_wait);
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	drbd_chk_io_error(mdev, error, FALSE);
+	drbd_queue_work(&mdev->data.work, &e->w);
+	put_ldev(mdev);
+}
+
+/* writes on behalf of the partner, or resync writes,
+ * "submitted" by the receiver.
+ */
+void drbd_endio_write_sec(struct bio *bio, int error) __releases(local)
+{
+	unsigned long flags = 0;
+	struct drbd_epoch_entry *e = NULL;
+	struct drbd_conf *mdev;
+	sector_t e_sector;
+	int do_wake;
+	int is_syncer_req;
+	int do_al_complete_io;
+	int uptodate = bio_flagged(bio, BIO_UPTODATE);
+	int is_barrier = bio_rw_flagged(bio, BIO_RW_BARRIER);
+
+	e = bio->bi_private;
+	mdev = e->mdev;
+
+	if (error)
+		dev_warn(DEV, "write: error=%d s=%llus\n", error,
+				(unsigned long long)e->sector);
+	if (!error && !uptodate) {
+		dev_warn(DEV, "write: setting error to -EIO s=%llus\n",
+				(unsigned long long)e->sector);
+		/* strange behavior of some lower level drivers...
+		 * fail the request by clearing the uptodate flag,
+		 * but do not return any error?! */
+		error = -EIO;
+	}
+
+	/* error == -ENOTSUPP would be a better test,
+	 * alas it is not reliable */
+	if (error && is_barrier && e->flags & EE_IS_BARRIER) {
+		drbd_bump_write_ordering(mdev, WO_bdev_flush);
+		spin_lock_irqsave(&mdev->req_lock, flags);
+		list_del(&e->w.list);
+		e->w.cb = w_e_reissue;
+		/* put_ldev actually happens below, once we come here again. */
+		__release(local);
+		spin_unlock_irqrestore(&mdev->req_lock, flags);
+		drbd_queue_work(&mdev->data.work, &e->w);
+		return;
+	}
+
+	D_ASSERT(e->block_id != ID_VACANT);
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	mdev->writ_cnt += e->size >> 9;
+	is_syncer_req = is_syncer_block_id(e->block_id);
+
+	/* after we moved e to done_ee,
+	 * we may no longer access it,
+	 * it may be freed/reused already!
+	 * (as soon as we release the req_lock) */
+	e_sector = e->sector;
+	do_al_complete_io = e->flags & EE_CALL_AL_COMPLETE_IO;
+
+	list_del(&e->w.list); /* has been on active_ee or sync_ee */
+	list_add_tail(&e->w.list, &mdev->done_ee);
+
+	/* No hlist_del_init(&e->colision) here, we did not send the Ack yet,
+	 * neither did we wake possibly waiting conflicting requests.
+	 * done from "drbd_process_done_ee" within the appropriate w.cb
+	 * (e_end_block/e_end_resync_block) or from _drbd_clear_done_ee */
+
+	do_wake = is_syncer_req
+		? list_empty(&mdev->sync_ee)
+		: list_empty(&mdev->active_ee);
+
+	if (error)
+		__drbd_chk_io_error(mdev, FALSE);
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	if (is_syncer_req)
+		drbd_rs_complete_io(mdev, e_sector);
+
+	if (do_wake)
+		wake_up(&mdev->ee_wait);
+
+	if (do_al_complete_io)
+		drbd_al_complete_io(mdev, e_sector);
+
+	wake_asender(mdev);
+	put_ldev(mdev);
+
+}
+
+/* read, readA or write requests on R_PRIMARY coming from drbd_make_request
+ */
+void drbd_endio_pri(struct bio *bio, int error)
+{
+	unsigned long flags;
+	struct drbd_request *req = bio->bi_private;
+	struct drbd_conf *mdev = req->mdev;
+	struct bio_and_error m;
+	enum drbd_req_event what;
+	int uptodate = bio_flagged(bio, BIO_UPTODATE);
+
+	if (error)
+		dev_warn(DEV, "p %s: error=%d\n",
+			 bio_data_dir(bio) == WRITE ? "write" : "read", error);
+	if (!error && !uptodate) {
+		dev_warn(DEV, "p %s: setting error to -EIO\n",
+			 bio_data_dir(bio) == WRITE ? "write" : "read");
+		/* strange behavior of some lower level drivers...
+		 * fail the request by clearing the uptodate flag,
+		 * but do not return any error?! */
+		error = -EIO;
+	}
+
+	/* to avoid recursion in __req_mod */
+	if (unlikely(error)) {
+		what = (bio_data_dir(bio) == WRITE)
+			? write_completed_with_error
+			: (bio_rw(bio) == READA)
+			  ? read_completed_with_error
+			  : read_ahead_completed_with_error;
+	} else
+		what = completed_ok;
+
+	bio_put(req->private_bio);
+	req->private_bio = ERR_PTR(error);
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	__req_mod(req, what, &m);
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	if (m.bio)
+		complete_master_bio(mdev, &m);
+}
+
+int w_io_error(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_request *req = container_of(w, struct drbd_request, w);
+
+	/* NOTE: mdev->ldev can be NULL by the time we get here! */
+	/* D_ASSERT(mdev->ldev->dc.on_io_error != EP_PASS_ON); */
+
+	/* the only way this callback is scheduled is from _req_may_be_done,
+	 * when it is done and had a local write error, see comments there */
+	drbd_req_free(req);
+
+	return TRUE;
+}
+
+int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_request *req = container_of(w, struct drbd_request, w);
+
+	/* We should not detach for read io-error,
+	 * but try to WRITE the P_DATA_REPLY to the failed location,
+	 * to give the disk the chance to relocate that block */
+
+	spin_lock_irq(&mdev->req_lock);
+	if (cancel ||
+	    mdev->state.conn < C_CONNECTED ||
+	    mdev->state.pdsk <= D_INCONSISTENT) {
+		_req_mod(req, send_canceled);
+		spin_unlock_irq(&mdev->req_lock);
+		dev_alert(DEV, "WE ARE LOST. Local IO failure, no peer.\n");
+		return 1;
+	}
+	spin_unlock_irq(&mdev->req_lock);
+
+	return w_send_read_req(mdev, w, 0);
+}
+
+int w_resync_inactive(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	ERR_IF(cancel) return 1;
+	dev_err(DEV, "resync inactive, but callback triggered??\n");
+	return 1; /* Simply ignore this! */
+}
+
+void drbd_csum(struct drbd_conf *mdev, struct crypto_hash *tfm, struct bio *bio, void *digest)
+{
+	struct hash_desc desc;
+	struct scatterlist sg;
+	struct bio_vec *bvec;
+	int i;
+
+	desc.tfm = tfm;
+	desc.flags = 0;
+
+	sg_init_table(&sg, 1);
+	crypto_hash_init(&desc);
+
+	__bio_for_each_segment(bvec, bio, i, 0) {
+		sg_set_page(&sg, bvec->bv_page, bvec->bv_len, bvec->bv_offset);
+		crypto_hash_update(&desc, &sg, sg.length);
+	}
+	crypto_hash_final(&desc, digest);
+}
+
+static int w_e_send_csum(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w);
+	int digest_size;
+	void *digest;
+	int ok;
+
+	D_ASSERT(e->block_id == DRBD_MAGIC + 0xbeef);
+
+	if (unlikely(cancel)) {
+		drbd_free_ee(mdev, e);
+		return 1;
+	}
+
+	if (likely(drbd_bio_uptodate(e->private_bio))) {
+		digest_size = crypto_hash_digestsize(mdev->csums_tfm);
+		digest = kmalloc(digest_size, GFP_NOIO);
+		if (digest) {
+			drbd_csum(mdev, mdev->csums_tfm, e->private_bio, digest);
+
+			inc_rs_pending(mdev);
+			ok = drbd_send_drequest_csum(mdev,
+						     e->sector,
+						     e->size,
+						     digest,
+						     digest_size,
+						     P_CSUM_RS_REQUEST);
+			kfree(digest);
+		} else {
+			dev_err(DEV, "kmalloc() of digest failed.\n");
+			ok = 0;
+		}
+	} else
+		ok = 1;
+
+	drbd_free_ee(mdev, e);
+
+	if (unlikely(!ok))
+		dev_err(DEV, "drbd_send_drequest(..., csum) failed\n");
+	return ok;
+}
+
+#define GFP_TRY	(__GFP_HIGHMEM | __GFP_NOWARN)
+
+static int read_for_csum(struct drbd_conf *mdev, sector_t sector, int size)
+{
+	struct drbd_epoch_entry *e;
+
+	if (!get_ldev(mdev))
+		return 0;
+
+	/* GFP_TRY, because if there is no memory available right now, this may
+	 * be rescheduled for later. It is "only" background resync, after all. */
+	e = drbd_alloc_ee(mdev, DRBD_MAGIC+0xbeef, sector, size, GFP_TRY);
+	if (!e) {
+		put_ldev(mdev);
+		return 2;
+	}
+
+	spin_lock_irq(&mdev->req_lock);
+	list_add(&e->w.list, &mdev->read_ee);
+	spin_unlock_irq(&mdev->req_lock);
+
+	e->private_bio->bi_end_io = drbd_endio_read_sec;
+	e->private_bio->bi_rw = READ;
+	e->w.cb = w_e_send_csum;
+
+	mdev->read_cnt += size >> 9;
+	drbd_generic_make_request(mdev, DRBD_FAULT_RS_RD, e->private_bio);
+
+	return 1;
+}
+
+void resync_timer_fn(unsigned long data)
+{
+	unsigned long flags;
+	struct drbd_conf *mdev = (struct drbd_conf *) data;
+	int queue;
+
+	spin_lock_irqsave(&mdev->req_lock, flags);
+
+	if (likely(!test_and_clear_bit(STOP_SYNC_TIMER, &mdev->flags))) {
+		queue = 1;
+		if (mdev->state.conn == C_VERIFY_S)
+			mdev->resync_work.cb = w_make_ov_request;
+		else
+			mdev->resync_work.cb = w_make_resync_request;
+	} else {
+		queue = 0;
+		mdev->resync_work.cb = w_resync_inactive;
+	}
+
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	/* harmless race: list_empty outside data.work.q_lock */
+	if (list_empty(&mdev->resync_work.list) && queue)
+		drbd_queue_work(&mdev->data.work, &mdev->resync_work);
+}
+
+int w_make_resync_request(struct drbd_conf *mdev,
+		struct drbd_work *w, int cancel)
+{
+	unsigned long bit;
+	sector_t sector;
+	const sector_t capacity = drbd_get_capacity(mdev->this_bdev);
+	int max_segment_size = queue_max_segment_size(mdev->rq_queue);
+	int number, i, size, pe, mx;
+	int align, queued, sndbuf;
+
+	if (unlikely(cancel))
+		return 1;
+
+	if (unlikely(mdev->state.conn < C_CONNECTED)) {
+		dev_err(DEV, "Confused in w_make_resync_request()! cstate < Connected");
+		return 0;
+	}
+
+	if (mdev->state.conn != C_SYNC_TARGET)
+		dev_err(DEV, "%s in w_make_resync_request\n",
+			drbd_conn_str(mdev->state.conn));
+
+	if (!get_ldev(mdev)) {
+		/* Since we only need to access mdev->rsync a
+		   get_ldev_if_state(mdev,D_FAILED) would be sufficient, but
+		   to continue resync with a broken disk makes no sense at
+		   all */
+		dev_err(DEV, "Disk broke down during resync!\n");
+		mdev->resync_work.cb = w_resync_inactive;
+		return 1;
+	}
+
+	number = SLEEP_TIME * mdev->sync_conf.rate / ((BM_BLOCK_SIZE/1024)*HZ);
+	pe = atomic_read(&mdev->rs_pending_cnt);
+
+	mutex_lock(&mdev->data.mutex);
+	if (mdev->data.socket)
+		mx = mdev->data.socket->sk->sk_rcvbuf / sizeof(struct p_block_req);
+	else
+		mx = 1;
+	mutex_unlock(&mdev->data.mutex);
+
+	/* For resync rates >160MB/sec, allow more pending RS requests */
+	if (number > mx)
+		mx = number;
+
+	/* Limit the number of pending RS requests to no more than the peer's receive buffer */
+	if ((pe + number) > mx) {
+		number = mx - pe;
+	}
+
+	for (i = 0; i < number; i++) {
+		/* Stop generating RS requests, when half of the send buffer is filled */
+		mutex_lock(&mdev->data.mutex);
+		if (mdev->data.socket) {
+			queued = mdev->data.socket->sk->sk_wmem_queued;
+			sndbuf = mdev->data.socket->sk->sk_sndbuf;
+		} else {
+			queued = 1;
+			sndbuf = 0;
+		}
+		mutex_unlock(&mdev->data.mutex);
+		if (queued > sndbuf / 2)
+			goto requeue;
+
+next_sector:
+		size = BM_BLOCK_SIZE;
+		bit  = drbd_bm_find_next(mdev, mdev->bm_resync_fo);
+
+		if (bit == -1UL) {
+			mdev->bm_resync_fo = drbd_bm_bits(mdev);
+			mdev->resync_work.cb = w_resync_inactive;
+			put_ldev(mdev);
+			return 1;
+		}
+
+		sector = BM_BIT_TO_SECT(bit);
+
+		if (drbd_try_rs_begin_io(mdev, sector)) {
+			mdev->bm_resync_fo = bit;
+			goto requeue;
+		}
+		mdev->bm_resync_fo = bit + 1;
+
+		if (unlikely(drbd_bm_test_bit(mdev, bit) == 0)) {
+			drbd_rs_complete_io(mdev, sector);
+			goto next_sector;
+		}
+
+#if DRBD_MAX_SEGMENT_SIZE > BM_BLOCK_SIZE
+		/* try to find some adjacent bits.
+		 * we stop if we have already the maximum req size.
+		 *
+		 * Additionally always align bigger requests, in order to
+		 * be prepared for all stripe sizes of software RAIDs.
+		 *
+		 * we _do_ care about the agreed-upon q->max_segment_size
+		 * here, as splitting up the requests on the other side is more
+		 * difficult.  the consequence is, that on lvm and md and other
+		 * "indirect" devices, this is dead code, since
+		 * q->max_segment_size will be PAGE_SIZE.
+		 */
+		align = 1;
+		for (;;) {
+			if (size + BM_BLOCK_SIZE > max_segment_size)
+				break;
+
+			/* Be always aligned */
+			if (sector & ((1<<(align+3))-1))
+				break;
+
+			/* do not cross extent boundaries */
+			if (((bit+1) & BM_BLOCKS_PER_BM_EXT_MASK) == 0)
+				break;
+			/* now, is it actually dirty, after all?
+			 * caution, drbd_bm_test_bit is tri-state for some
+			 * obscure reason; ( b == 0 ) would get the out-of-band
+			 * only accidentally right because of the "oddly sized"
+			 * adjustment below */
+			if (drbd_bm_test_bit(mdev, bit+1) != 1)
+				break;
+			bit++;
+			size += BM_BLOCK_SIZE;
+			if ((BM_BLOCK_SIZE << align) <= size)
+				align++;
+			i++;
+		}
+		/* if we merged some,
+		 * reset the offset to start the next drbd_bm_find_next from */
+		if (size > BM_BLOCK_SIZE)
+			mdev->bm_resync_fo = bit + 1;
+#endif
+
+		/* adjust very last sectors, in case we are oddly sized */
+		if (sector + (size>>9) > capacity)
+			size = (capacity-sector)<<9;
+		if (mdev->agreed_pro_version >= 89 && mdev->csums_tfm) {
+			switch (read_for_csum(mdev, sector, size)) {
+			case 0: /* Disk failure*/
+				put_ldev(mdev);
+				return 0;
+			case 2: /* Allocation failed */
+				drbd_rs_complete_io(mdev, sector);
+				mdev->bm_resync_fo = BM_SECT_TO_BIT(sector);
+				goto requeue;
+			/* case 1: everything ok */
+			}
+		} else {
+			inc_rs_pending(mdev);
+			if (!drbd_send_drequest(mdev, P_RS_DATA_REQUEST,
+					       sector, size, ID_SYNCER)) {
+				dev_err(DEV, "drbd_send_drequest() failed, aborting...\n");
+				dec_rs_pending(mdev);
+				put_ldev(mdev);
+				return 0;
+			}
+		}
+	}
+
+	if (mdev->bm_resync_fo >= drbd_bm_bits(mdev)) {
+		/* last syncer _request_ was sent,
+		 * but the P_RS_DATA_REPLY not yet received.  sync will end (and
+		 * next sync group will resume), as soon as we receive the last
+		 * resync data block, and the last bit is cleared.
+		 * until then resync "work" is "inactive" ...
+		 */
+		mdev->resync_work.cb = w_resync_inactive;
+		put_ldev(mdev);
+		return 1;
+	}
+
+ requeue:
+	mod_timer(&mdev->resync_timer, jiffies + SLEEP_TIME);
+	put_ldev(mdev);
+	return 1;
+}
+
+static int w_make_ov_request(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	int number, i, size;
+	sector_t sector;
+	const sector_t capacity = drbd_get_capacity(mdev->this_bdev);
+
+	if (unlikely(cancel))
+		return 1;
+
+	if (unlikely(mdev->state.conn < C_CONNECTED)) {
+		dev_err(DEV, "Confused in w_make_ov_request()! cstate < Connected");
+		return 0;
+	}
+
+	number = SLEEP_TIME*mdev->sync_conf.rate / ((BM_BLOCK_SIZE/1024)*HZ);
+	if (atomic_read(&mdev->rs_pending_cnt) > number)
+		goto requeue;
+
+	number -= atomic_read(&mdev->rs_pending_cnt);
+
+	sector = mdev->ov_position;
+	for (i = 0; i < number; i++) {
+		if (sector >= capacity) {
+			mdev->resync_work.cb = w_resync_inactive;
+			return 1;
+		}
+
+		size = BM_BLOCK_SIZE;
+
+		if (drbd_try_rs_begin_io(mdev, sector)) {
+			mdev->ov_position = sector;
+			goto requeue;
+		}
+
+		if (sector + (size>>9) > capacity)
+			size = (capacity-sector)<<9;
+
+		inc_rs_pending(mdev);
+		if (!drbd_send_ov_request(mdev, sector, size)) {
+			dec_rs_pending(mdev);
+			return 0;
+		}
+		sector += BM_SECT_PER_BIT;
+	}
+	mdev->ov_position = sector;
+
+ requeue:
+	mod_timer(&mdev->resync_timer, jiffies + SLEEP_TIME);
+	return 1;
+}
+
+
+int w_ov_finished(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	kfree(w);
+	ov_oos_print(mdev);
+	drbd_resync_finished(mdev);
+
+	return 1;
+}
+
+static int w_resync_finished(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	kfree(w);
+
+	drbd_resync_finished(mdev);
+
+	return 1;
+}
+
+int drbd_resync_finished(struct drbd_conf *mdev)
+{
+	unsigned long db, dt, dbdt;
+	unsigned long n_oos;
+	union drbd_state os, ns;
+	struct drbd_work *w;
+	char *khelper_cmd = NULL;
+
+	/* Remove all elements from the resync LRU. Since future actions
+	 * might set bits in the (main) bitmap, then the entries in the
+	 * resync LRU would be wrong. */
+	if (drbd_rs_del_all(mdev)) {
+		/* In case this is not possible now, most probably because
+		 * there are P_RS_DATA_REPLY Packets lingering on the worker's
+		 * queue (or even the read operations for those packets
+		 * is not finished by now).   Retry in 100ms. */
+
+		drbd_kick_lo(mdev);
+		__set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ / 10);
+		w = kmalloc(sizeof(struct drbd_work), GFP_ATOMIC);
+		if (w) {
+			w->cb = w_resync_finished;
+			drbd_queue_work(&mdev->data.work, w);
+			return 1;
+		}
+		dev_err(DEV, "Warn failed to drbd_rs_del_all() and to kmalloc(w).\n");
+	}
+
+	dt = (jiffies - mdev->rs_start - mdev->rs_paused) / HZ;
+	if (dt <= 0)
+		dt = 1;
+	db = mdev->rs_total;
+	dbdt = Bit2KB(db/dt);
+	mdev->rs_paused /= HZ;
+
+	if (!get_ldev(mdev))
+		goto out;
+
+	spin_lock_irq(&mdev->req_lock);
+	os = mdev->state;
+
+	/* This protects us against multiple calls (that can happen in the presence
+	   of application IO), and against connectivity loss just before we arrive here. */
+	if (os.conn <= C_CONNECTED)
+		goto out_unlock;
+
+	ns = os;
+	ns.conn = C_CONNECTED;
+
+	dev_info(DEV, "%s done (total %lu sec; paused %lu sec; %lu K/sec)\n",
+	     (os.conn == C_VERIFY_S || os.conn == C_VERIFY_T) ?
+	     "Online verify " : "Resync",
+	     dt + mdev->rs_paused, mdev->rs_paused, dbdt);
+
+	n_oos = drbd_bm_total_weight(mdev);
+
+	if (os.conn == C_VERIFY_S || os.conn == C_VERIFY_T) {
+		if (n_oos) {
+			dev_alert(DEV, "Online verify found %lu %dk block out of sync!\n",
+			      n_oos, Bit2KB(1));
+			khelper_cmd = "out-of-sync";
+		}
+	} else {
+		D_ASSERT((n_oos - mdev->rs_failed) == 0);
+
+		if (os.conn == C_SYNC_TARGET || os.conn == C_PAUSED_SYNC_T)
+			khelper_cmd = "after-resync-target";
+
+		if (mdev->csums_tfm && mdev->rs_total) {
+			const unsigned long s = mdev->rs_same_csum;
+			const unsigned long t = mdev->rs_total;
+			const int ratio =
+				(t == 0)     ? 0 :
+			(t < 100000) ? ((s*100)/t) : (s/(t/100));
+			dev_info(DEV, "%u %% had equal check sums, eliminated: %luK; "
+			     "transferred %luK total %luK\n",
+			     ratio,
+			     Bit2KB(mdev->rs_same_csum),
+			     Bit2KB(mdev->rs_total - mdev->rs_same_csum),
+			     Bit2KB(mdev->rs_total));
+		}
+	}
+
+	if (mdev->rs_failed) {
+		dev_info(DEV, "            %lu failed blocks\n", mdev->rs_failed);
+
+		if (os.conn == C_SYNC_TARGET || os.conn == C_PAUSED_SYNC_T) {
+			ns.disk = D_INCONSISTENT;
+			ns.pdsk = D_UP_TO_DATE;
+		} else {
+			ns.disk = D_UP_TO_DATE;
+			ns.pdsk = D_INCONSISTENT;
+		}
+	} else {
+		ns.disk = D_UP_TO_DATE;
+		ns.pdsk = D_UP_TO_DATE;
+
+		if (os.conn == C_SYNC_TARGET || os.conn == C_PAUSED_SYNC_T) {
+			if (mdev->p_uuid) {
+				int i;
+				for (i = UI_BITMAP ; i <= UI_HISTORY_END ; i++)
+					_drbd_uuid_set(mdev, i, mdev->p_uuid[i]);
+				drbd_uuid_set(mdev, UI_BITMAP, mdev->ldev->md.uuid[UI_CURRENT]);
+				_drbd_uuid_set(mdev, UI_CURRENT, mdev->p_uuid[UI_CURRENT]);
+			} else {
+				dev_err(DEV, "mdev->p_uuid is NULL! BUG\n");
+			}
+		}
+
+		drbd_uuid_set_bm(mdev, 0UL);
+
+		if (mdev->p_uuid) {
+			/* Now the two UUID sets are equal, update what we
+			 * know of the peer. */
+			int i;
+			for (i = UI_CURRENT ; i <= UI_HISTORY_END ; i++)
+				mdev->p_uuid[i] = mdev->ldev->md.uuid[i];
+		}
+	}
+
+	_drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
+out_unlock:
+	spin_unlock_irq(&mdev->req_lock);
+	put_ldev(mdev);
+out:
+	mdev->rs_total  = 0;
+	mdev->rs_failed = 0;
+	mdev->rs_paused = 0;
+	mdev->ov_start_sector = 0;
+
+	if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) {
+		dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n");
+		drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished");
+	}
+
+	if (khelper_cmd)
+		drbd_khelper(mdev, khelper_cmd);
+
+	return 1;
+}
+
+/* helper */
+static void move_to_net_ee_or_free(struct drbd_conf *mdev, struct drbd_epoch_entry *e)
+{
+	if (drbd_bio_has_active_page(e->private_bio)) {
+		/* This might happen if sendpage() has not finished */
+		spin_lock_irq(&mdev->req_lock);
+		list_add_tail(&e->w.list, &mdev->net_ee);
+		spin_unlock_irq(&mdev->req_lock);
+	} else
+		drbd_free_ee(mdev, e);
+}
+
+/**
+ * w_e_end_data_req() - Worker callback, to send a P_DATA_REPLY packet in response to a P_DATA_REQUEST
+ * @mdev:	DRBD device.
+ * @w:		work object.
+ * @cancel:	The connection will be closed anyways
+ */
+int w_e_end_data_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w);
+	int ok;
+
+	if (unlikely(cancel)) {
+		drbd_free_ee(mdev, e);
+		dec_unacked(mdev);
+		return 1;
+	}
+
+	if (likely(drbd_bio_uptodate(e->private_bio))) {
+		ok = drbd_send_block(mdev, P_DATA_REPLY, e);
+	} else {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Sending NegDReply. sector=%llus.\n",
+			    (unsigned long long)e->sector);
+
+		ok = drbd_send_ack(mdev, P_NEG_DREPLY, e);
+	}
+
+	dec_unacked(mdev);
+
+	move_to_net_ee_or_free(mdev, e);
+
+	if (unlikely(!ok))
+		dev_err(DEV, "drbd_send_block() failed\n");
+	return ok;
+}
+
+/**
+ * w_e_end_rsdata_req() - Worker callback to send a P_RS_DATA_REPLY packet in response to a P_RS_DATA_REQUESTRS
+ * @mdev:	DRBD device.
+ * @w:		work object.
+ * @cancel:	The connection will be closed anyways
+ */
+int w_e_end_rsdata_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w);
+	int ok;
+
+	if (unlikely(cancel)) {
+		drbd_free_ee(mdev, e);
+		dec_unacked(mdev);
+		return 1;
+	}
+
+	if (get_ldev_if_state(mdev, D_FAILED)) {
+		drbd_rs_complete_io(mdev, e->sector);
+		put_ldev(mdev);
+	}
+
+	if (likely(drbd_bio_uptodate(e->private_bio))) {
+		if (likely(mdev->state.pdsk >= D_INCONSISTENT)) {
+			inc_rs_pending(mdev);
+			ok = drbd_send_block(mdev, P_RS_DATA_REPLY, e);
+		} else {
+			if (__ratelimit(&drbd_ratelimit_state))
+				dev_err(DEV, "Not sending RSDataReply, "
+				    "partner DISKLESS!\n");
+			ok = 1;
+		}
+	} else {
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Sending NegRSDReply. sector %llus.\n",
+			    (unsigned long long)e->sector);
+
+		ok = drbd_send_ack(mdev, P_NEG_RS_DREPLY, e);
+
+		/* update resync data with failure */
+		drbd_rs_failed_io(mdev, e->sector, e->size);
+	}
+
+	dec_unacked(mdev);
+
+	move_to_net_ee_or_free(mdev, e);
+
+	if (unlikely(!ok))
+		dev_err(DEV, "drbd_send_block() failed\n");
+	return ok;
+}
+
+int w_e_end_csum_rs_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w);
+	struct digest_info *di;
+	int digest_size;
+	void *digest = NULL;
+	int ok, eq = 0;
+
+	if (unlikely(cancel)) {
+		drbd_free_ee(mdev, e);
+		dec_unacked(mdev);
+		return 1;
+	}
+
+	drbd_rs_complete_io(mdev, e->sector);
+
+	di = (struct digest_info *)(unsigned long)e->block_id;
+
+	if (likely(drbd_bio_uptodate(e->private_bio))) {
+		/* quick hack to try to avoid a race against reconfiguration.
+		 * a real fix would be much more involved,
+		 * introducing more locking mechanisms */
+		if (mdev->csums_tfm) {
+			digest_size = crypto_hash_digestsize(mdev->csums_tfm);
+			D_ASSERT(digest_size == di->digest_size);
+			digest = kmalloc(digest_size, GFP_NOIO);
+		}
+		if (digest) {
+			drbd_csum(mdev, mdev->csums_tfm, e->private_bio, digest);
+			eq = !memcmp(digest, di->digest, digest_size);
+			kfree(digest);
+		}
+
+		if (eq) {
+			drbd_set_in_sync(mdev, e->sector, e->size);
+			mdev->rs_same_csum++;
+			ok = drbd_send_ack(mdev, P_RS_IS_IN_SYNC, e);
+		} else {
+			inc_rs_pending(mdev);
+			e->block_id = ID_SYNCER;
+			ok = drbd_send_block(mdev, P_RS_DATA_REPLY, e);
+		}
+	} else {
+		ok = drbd_send_ack(mdev, P_NEG_RS_DREPLY, e);
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Sending NegDReply. I guess it gets messy.\n");
+	}
+
+	dec_unacked(mdev);
+
+	kfree(di);
+
+	move_to_net_ee_or_free(mdev, e);
+
+	if (unlikely(!ok))
+		dev_err(DEV, "drbd_send_block/ack() failed\n");
+	return ok;
+}
+
+int w_e_end_ov_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w);
+	int digest_size;
+	void *digest;
+	int ok = 1;
+
+	if (unlikely(cancel))
+		goto out;
+
+	if (unlikely(!drbd_bio_uptodate(e->private_bio)))
+		goto out;
+
+	digest_size = crypto_hash_digestsize(mdev->verify_tfm);
+	/* FIXME if this allocation fails, online verify will not terminate! */
+	digest = kmalloc(digest_size, GFP_NOIO);
+	if (digest) {
+		drbd_csum(mdev, mdev->verify_tfm, e->private_bio, digest);
+		inc_rs_pending(mdev);
+		ok = drbd_send_drequest_csum(mdev, e->sector, e->size,
+					     digest, digest_size, P_OV_REPLY);
+		if (!ok)
+			dec_rs_pending(mdev);
+		kfree(digest);
+	}
+
+out:
+	drbd_free_ee(mdev, e);
+
+	dec_unacked(mdev);
+
+	return ok;
+}
+
+void drbd_ov_oos_found(struct drbd_conf *mdev, sector_t sector, int size)
+{
+	if (mdev->ov_last_oos_start + mdev->ov_last_oos_size == sector) {
+		mdev->ov_last_oos_size += size>>9;
+	} else {
+		mdev->ov_last_oos_start = sector;
+		mdev->ov_last_oos_size = size>>9;
+	}
+	drbd_set_out_of_sync(mdev, sector, size);
+	set_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags);
+}
+
+int w_e_end_ov_reply(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_epoch_entry *e = container_of(w, struct drbd_epoch_entry, w);
+	struct digest_info *di;
+	int digest_size;
+	void *digest;
+	int ok, eq = 0;
+
+	if (unlikely(cancel)) {
+		drbd_free_ee(mdev, e);
+		dec_unacked(mdev);
+		return 1;
+	}
+
+	/* after "cancel", because after drbd_disconnect/drbd_rs_cancel_all
+	 * the resync lru has been cleaned up already */
+	drbd_rs_complete_io(mdev, e->sector);
+
+	di = (struct digest_info *)(unsigned long)e->block_id;
+
+	if (likely(drbd_bio_uptodate(e->private_bio))) {
+		digest_size = crypto_hash_digestsize(mdev->verify_tfm);
+		digest = kmalloc(digest_size, GFP_NOIO);
+		if (digest) {
+			drbd_csum(mdev, mdev->verify_tfm, e->private_bio, digest);
+
+			D_ASSERT(digest_size == di->digest_size);
+			eq = !memcmp(digest, di->digest, digest_size);
+			kfree(digest);
+		}
+	} else {
+		ok = drbd_send_ack(mdev, P_NEG_RS_DREPLY, e);
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "Sending NegDReply. I guess it gets messy.\n");
+	}
+
+	dec_unacked(mdev);
+
+	kfree(di);
+
+	if (!eq)
+		drbd_ov_oos_found(mdev, e->sector, e->size);
+	else
+		ov_oos_print(mdev);
+
+	ok = drbd_send_ack_ex(mdev, P_OV_RESULT, e->sector, e->size,
+			      eq ? ID_IN_SYNC : ID_OUT_OF_SYNC);
+
+	drbd_free_ee(mdev, e);
+
+	if (--mdev->ov_left == 0) {
+		ov_oos_print(mdev);
+		drbd_resync_finished(mdev);
+	}
+
+	return ok;
+}
+
+int w_prev_work_done(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_wq_barrier *b = container_of(w, struct drbd_wq_barrier, w);
+	complete(&b->done);
+	return 1;
+}
+
+int w_send_barrier(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_tl_epoch *b = container_of(w, struct drbd_tl_epoch, w);
+	struct p_barrier *p = &mdev->data.sbuf.barrier;
+	int ok = 1;
+
+	/* really avoid racing with tl_clear.  w.cb may have been referenced
+	 * just before it was reassigned and re-queued, so double check that.
+	 * actually, this race was harmless, since we only try to send the
+	 * barrier packet here, and otherwise do nothing with the object.
+	 * but compare with the head of w_clear_epoch */
+	spin_lock_irq(&mdev->req_lock);
+	if (w->cb != w_send_barrier || mdev->state.conn < C_CONNECTED)
+		cancel = 1;
+	spin_unlock_irq(&mdev->req_lock);
+	if (cancel)
+		return 1;
+
+	if (!drbd_get_data_sock(mdev))
+		return 0;
+	p->barrier = b->br_number;
+	/* inc_ap_pending was done where this was queued.
+	 * dec_ap_pending will be done in got_BarrierAck
+	 * or (on connection loss) in w_clear_epoch.  */
+	ok = _drbd_send_cmd(mdev, mdev->data.socket, P_BARRIER,
+				(struct p_header *)p, sizeof(*p), 0);
+	drbd_put_data_sock(mdev);
+
+	return ok;
+}
+
+int w_send_write_hint(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	if (cancel)
+		return 1;
+	return drbd_send_short_cmd(mdev, P_UNPLUG_REMOTE);
+}
+
+/**
+ * w_send_dblock() - Worker callback to send a P_DATA packet in order to mirror a write request
+ * @mdev:	DRBD device.
+ * @w:		work object.
+ * @cancel:	The connection will be closed anyways
+ */
+int w_send_dblock(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_request *req = container_of(w, struct drbd_request, w);
+	int ok;
+
+	if (unlikely(cancel)) {
+		req_mod(req, send_canceled);
+		return 1;
+	}
+
+	ok = drbd_send_dblock(mdev, req);
+	req_mod(req, ok ? handed_over_to_network : send_failed);
+
+	return ok;
+}
+
+/**
+ * w_send_read_req() - Worker callback to send a read request (P_DATA_REQUEST) packet
+ * @mdev:	DRBD device.
+ * @w:		work object.
+ * @cancel:	The connection will be closed anyways
+ */
+int w_send_read_req(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
+{
+	struct drbd_request *req = container_of(w, struct drbd_request, w);
+	int ok;
+
+	if (unlikely(cancel)) {
+		req_mod(req, send_canceled);
+		return 1;
+	}
+
+	ok = drbd_send_drequest(mdev, P_DATA_REQUEST, req->sector, req->size,
+				(unsigned long)req);
+
+	if (!ok) {
+		/* ?? we set C_TIMEOUT or C_BROKEN_PIPE in drbd_send();
+		 * so this is probably redundant */
+		if (mdev->state.conn >= C_CONNECTED)
+			drbd_force_state(mdev, NS(conn, C_NETWORK_FAILURE));
+	}
+	req_mod(req, ok ? handed_over_to_network : send_failed);
+
+	return ok;
+}
+
+static int _drbd_may_sync_now(struct drbd_conf *mdev)
+{
+	struct drbd_conf *odev = mdev;
+
+	while (1) {
+		if (odev->sync_conf.after == -1)
+			return 1;
+		odev = minor_to_mdev(odev->sync_conf.after);
+		ERR_IF(!odev) return 1;
+		if ((odev->state.conn >= C_SYNC_SOURCE &&
+		     odev->state.conn <= C_PAUSED_SYNC_T) ||
+		    odev->state.aftr_isp || odev->state.peer_isp ||
+		    odev->state.user_isp)
+			return 0;
+	}
+}
+
+/**
+ * _drbd_pause_after() - Pause resync on all devices that may not resync now
+ * @mdev:	DRBD device.
+ *
+ * Called from process context only (admin command and after_state_ch).
+ */
+static int _drbd_pause_after(struct drbd_conf *mdev)
+{
+	struct drbd_conf *odev;
+	int i, rv = 0;
+
+	for (i = 0; i < minor_count; i++) {
+		odev = minor_to_mdev(i);
+		if (!odev)
+			continue;
+		if (odev->state.conn == C_STANDALONE && odev->state.disk == D_DISKLESS)
+			continue;
+		if (!_drbd_may_sync_now(odev))
+			rv |= (__drbd_set_state(_NS(odev, aftr_isp, 1), CS_HARD, NULL)
+			       != SS_NOTHING_TO_DO);
+	}
+
+	return rv;
+}
+
+/**
+ * _drbd_resume_next() - Resume resync on all devices that may resync now
+ * @mdev:	DRBD device.
+ *
+ * Called from process context only (admin command and worker).
+ */
+static int _drbd_resume_next(struct drbd_conf *mdev)
+{
+	struct drbd_conf *odev;
+	int i, rv = 0;
+
+	for (i = 0; i < minor_count; i++) {
+		odev = minor_to_mdev(i);
+		if (!odev)
+			continue;
+		if (odev->state.conn == C_STANDALONE && odev->state.disk == D_DISKLESS)
+			continue;
+		if (odev->state.aftr_isp) {
+			if (_drbd_may_sync_now(odev))
+				rv |= (__drbd_set_state(_NS(odev, aftr_isp, 0),
+							CS_HARD, NULL)
+				       != SS_NOTHING_TO_DO) ;
+		}
+	}
+	return rv;
+}
+
+void resume_next_sg(struct drbd_conf *mdev)
+{
+	write_lock_irq(&global_state_lock);
+	_drbd_resume_next(mdev);
+	write_unlock_irq(&global_state_lock);
+}
+
+void suspend_other_sg(struct drbd_conf *mdev)
+{
+	write_lock_irq(&global_state_lock);
+	_drbd_pause_after(mdev);
+	write_unlock_irq(&global_state_lock);
+}
+
+static int sync_after_error(struct drbd_conf *mdev, int o_minor)
+{
+	struct drbd_conf *odev;
+
+	if (o_minor == -1)
+		return NO_ERROR;
+	if (o_minor < -1 || minor_to_mdev(o_minor) == NULL)
+		return ERR_SYNC_AFTER;
+
+	/* check for loops */
+	odev = minor_to_mdev(o_minor);
+	while (1) {
+		if (odev == mdev)
+			return ERR_SYNC_AFTER_CYCLE;
+
+		/* dependency chain ends here, no cycles. */
+		if (odev->sync_conf.after == -1)
+			return NO_ERROR;
+
+		/* follow the dependency chain */
+		odev = minor_to_mdev(odev->sync_conf.after);
+	}
+}
+
+int drbd_alter_sa(struct drbd_conf *mdev, int na)
+{
+	int changes;
+	int retcode;
+
+	write_lock_irq(&global_state_lock);
+	retcode = sync_after_error(mdev, na);
+	if (retcode == NO_ERROR) {
+		mdev->sync_conf.after = na;
+		do {
+			changes  = _drbd_pause_after(mdev);
+			changes |= _drbd_resume_next(mdev);
+		} while (changes);
+	}
+	write_unlock_irq(&global_state_lock);
+	return retcode;
+}
+
+/**
+ * drbd_start_resync() - Start the resync process
+ * @mdev:	DRBD device.
+ * @side:	Either C_SYNC_SOURCE or C_SYNC_TARGET
+ *
+ * This function might bring you directly into one of the
+ * C_PAUSED_SYNC_* states.
+ */
+void drbd_start_resync(struct drbd_conf *mdev, enum drbd_conns side)
+{
+	union drbd_state ns;
+	int r;
+
+	if (mdev->state.conn >= C_SYNC_SOURCE) {
+		dev_err(DEV, "Resync already running!\n");
+		return;
+	}
+
+	/* In case a previous resync run was aborted by an IO error/detach on the peer. */
+	drbd_rs_cancel_all(mdev);
+
+	if (side == C_SYNC_TARGET) {
+		/* Since application IO was locked out during C_WF_BITMAP_T and
+		   C_WF_SYNC_UUID we are still unmodified. Before going to C_SYNC_TARGET
+		   we check that we might make the data inconsistent. */
+		r = drbd_khelper(mdev, "before-resync-target");
+		r = (r >> 8) & 0xff;
+		if (r > 0) {
+			dev_info(DEV, "before-resync-target handler returned %d, "
+			     "dropping connection.\n", r);
+			drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
+			return;
+		}
+	}
+
+	drbd_state_lock(mdev);
+
+	if (!get_ldev_if_state(mdev, D_NEGOTIATING)) {
+		drbd_state_unlock(mdev);
+		return;
+	}
+
+	if (side == C_SYNC_TARGET) {
+		mdev->bm_resync_fo = 0;
+	} else /* side == C_SYNC_SOURCE */ {
+		u64 uuid;
+
+		get_random_bytes(&uuid, sizeof(u64));
+		drbd_uuid_set(mdev, UI_BITMAP, uuid);
+		drbd_send_sync_uuid(mdev, uuid);
+
+		D_ASSERT(mdev->state.disk == D_UP_TO_DATE);
+	}
+
+	write_lock_irq(&global_state_lock);
+	ns = mdev->state;
+
+	ns.aftr_isp = !_drbd_may_sync_now(mdev);
+
+	ns.conn = side;
+
+	if (side == C_SYNC_TARGET)
+		ns.disk = D_INCONSISTENT;
+	else /* side == C_SYNC_SOURCE */
+		ns.pdsk = D_INCONSISTENT;
+
+	r = __drbd_set_state(mdev, ns, CS_VERBOSE, NULL);
+	ns = mdev->state;
+
+	if (ns.conn < C_CONNECTED)
+		r = SS_UNKNOWN_ERROR;
+
+	if (r == SS_SUCCESS) {
+		mdev->rs_total     =
+		mdev->rs_mark_left = drbd_bm_total_weight(mdev);
+		mdev->rs_failed    = 0;
+		mdev->rs_paused    = 0;
+		mdev->rs_start     =
+		mdev->rs_mark_time = jiffies;
+		mdev->rs_same_csum = 0;
+		_drbd_pause_after(mdev);
+	}
+	write_unlock_irq(&global_state_lock);
+	drbd_state_unlock(mdev);
+	put_ldev(mdev);
+
+	if (r == SS_SUCCESS) {
+		dev_info(DEV, "Began resync as %s (will sync %lu KB [%lu bits set]).\n",
+		     drbd_conn_str(ns.conn),
+		     (unsigned long) mdev->rs_total << (BM_BLOCK_SHIFT-10),
+		     (unsigned long) mdev->rs_total);
+
+		if (mdev->rs_total == 0) {
+			/* Peer still reachable? Beware of failing before-resync-target handlers! */
+			request_ping(mdev);
+			__set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(mdev->net_conf->ping_timeo*HZ/9); /* 9 instead 10 */
+			drbd_resync_finished(mdev);
+			return;
+		}
+
+		/* ns.conn may already be != mdev->state.conn,
+		 * we may have been paused in between, or become paused until
+		 * the timer triggers.
+		 * No matter, that is handled in resync_timer_fn() */
+		if (ns.conn == C_SYNC_TARGET)
+			mod_timer(&mdev->resync_timer, jiffies);
+
+		drbd_md_sync(mdev);
+	}
+}
+
+int drbd_worker(struct drbd_thread *thi)
+{
+	struct drbd_conf *mdev = thi->mdev;
+	struct drbd_work *w = NULL;
+	LIST_HEAD(work_list);
+	int intr = 0, i;
+
+	sprintf(current->comm, "drbd%d_worker", mdev_to_minor(mdev));
+
+	while (get_t_state(thi) == Running) {
+		drbd_thread_current_set_cpu(mdev);
+
+		if (down_trylock(&mdev->data.work.s)) {
+			mutex_lock(&mdev->data.mutex);
+			if (mdev->data.socket && !mdev->net_conf->no_cork)
+				drbd_tcp_uncork(mdev->data.socket);
+			mutex_unlock(&mdev->data.mutex);
+
+			intr = down_interruptible(&mdev->data.work.s);
+
+			mutex_lock(&mdev->data.mutex);
+			if (mdev->data.socket  && !mdev->net_conf->no_cork)
+				drbd_tcp_cork(mdev->data.socket);
+			mutex_unlock(&mdev->data.mutex);
+		}
+
+		if (intr) {
+			D_ASSERT(intr == -EINTR);
+			flush_signals(current);
+			ERR_IF (get_t_state(thi) == Running)
+				continue;
+			break;
+		}
+
+		if (get_t_state(thi) != Running)
+			break;
+		/* With this break, we have done a down() but not consumed
+		   the entry from the list. The cleanup code takes care of
+		   this...   */
+
+		w = NULL;
+		spin_lock_irq(&mdev->data.work.q_lock);
+		ERR_IF(list_empty(&mdev->data.work.q)) {
+			/* something terribly wrong in our logic.
+			 * we were able to down() the semaphore,
+			 * but the list is empty... doh.
+			 *
+			 * what is the best thing to do now?
+			 * try again from scratch, restarting the receiver,
+			 * asender, whatnot? could break even more ugly,
+			 * e.g. when we are primary, but no good local data.
+			 *
+			 * I'll try to get away just starting over this loop.
+			 */
+			spin_unlock_irq(&mdev->data.work.q_lock);
+			continue;
+		}
+		w = list_entry(mdev->data.work.q.next, struct drbd_work, list);
+		list_del_init(&w->list);
+		spin_unlock_irq(&mdev->data.work.q_lock);
+
+		if (!w->cb(mdev, w, mdev->state.conn < C_CONNECTED)) {
+			/* dev_warn(DEV, "worker: a callback failed! \n"); */
+			if (mdev->state.conn >= C_CONNECTED)
+				drbd_force_state(mdev,
+						NS(conn, C_NETWORK_FAILURE));
+		}
+	}
+	D_ASSERT(test_bit(DEVICE_DYING, &mdev->flags));
+	D_ASSERT(test_bit(CONFIG_PENDING, &mdev->flags));
+
+	spin_lock_irq(&mdev->data.work.q_lock);
+	i = 0;
+	while (!list_empty(&mdev->data.work.q)) {
+		list_splice_init(&mdev->data.work.q, &work_list);
+		spin_unlock_irq(&mdev->data.work.q_lock);
+
+		while (!list_empty(&work_list)) {
+			w = list_entry(work_list.next, struct drbd_work, list);
+			list_del_init(&w->list);
+			w->cb(mdev, w, 1);
+			i++; /* dead debugging code */
+		}
+
+		spin_lock_irq(&mdev->data.work.q_lock);
+	}
+	sema_init(&mdev->data.work.s, 0);
+	/* DANGEROUS race: if someone did queue his work within the spinlock,
+	 * but up() ed outside the spinlock, we could get an up() on the
+	 * semaphore without corresponding list entry.
+	 * So don't do that.
+	 */
+	spin_unlock_irq(&mdev->data.work.q_lock);
+
+	D_ASSERT(mdev->state.disk == D_DISKLESS && mdev->state.conn == C_STANDALONE);
+	/* _drbd_set_state only uses stop_nowait.
+	 * wait here for the Exiting receiver. */
+	drbd_thread_stop(&mdev->receiver);
+	drbd_mdev_cleanup(mdev);
+
+	dev_info(DEV, "worker terminated\n");
+
+	clear_bit(DEVICE_DYING, &mdev->flags);
+	clear_bit(CONFIG_PENDING, &mdev->flags);
+	wake_up(&mdev->state_wait);
+
+	return 0;
+}
diff --git a/drivers/block/drbd/drbd_wrappers.h b/drivers/block/drbd/drbd_wrappers.h
new file mode 100644
index 0000000..f93fa11
--- /dev/null
+++ b/drivers/block/drbd/drbd_wrappers.h
@@ -0,0 +1,91 @@
+#ifndef _DRBD_WRAPPERS_H
+#define _DRBD_WRAPPERS_H
+
+#include <linux/ctype.h>
+#include <linux/mm.h>
+
+/* see get_sb_bdev and bd_claim */
+extern char *drbd_sec_holder;
+
+/* sets the number of 512 byte sectors of our virtual device */
+static inline void drbd_set_my_capacity(struct drbd_conf *mdev,
+					sector_t size)
+{
+	/* set_capacity(mdev->this_bdev->bd_disk, size); */
+	set_capacity(mdev->vdisk, size);
+	mdev->this_bdev->bd_inode->i_size = (loff_t)size << 9;
+}
+
+#define drbd_bio_uptodate(bio) bio_flagged(bio, BIO_UPTODATE)
+
+static inline int drbd_bio_has_active_page(struct bio *bio)
+{
+	struct bio_vec *bvec;
+	int i;
+
+	__bio_for_each_segment(bvec, bio, i, 0) {
+		if (page_count(bvec->bv_page) > 1)
+			return 1;
+	}
+
+	return 0;
+}
+
+/* bi_end_io handlers */
+extern void drbd_md_io_complete(struct bio *bio, int error);
+extern void drbd_endio_read_sec(struct bio *bio, int error);
+extern void drbd_endio_write_sec(struct bio *bio, int error);
+extern void drbd_endio_pri(struct bio *bio, int error);
+
+/*
+ * used to submit our private bio
+ */
+static inline void drbd_generic_make_request(struct drbd_conf *mdev,
+					     int fault_type, struct bio *bio)
+{
+	__release(local);
+	if (!bio->bi_bdev) {
+		printk(KERN_ERR "drbd%d: drbd_generic_make_request: "
+				"bio->bi_bdev == NULL\n",
+		       mdev_to_minor(mdev));
+		dump_stack();
+		bio_endio(bio, -ENODEV);
+		return;
+	}
+
+	if (FAULT_ACTIVE(mdev, fault_type))
+		bio_endio(bio, -EIO);
+	else
+		generic_make_request(bio);
+}
+
+static inline void drbd_plug_device(struct drbd_conf *mdev)
+{
+	struct request_queue *q;
+	q = bdev_get_queue(mdev->this_bdev);
+
+	spin_lock_irq(q->queue_lock);
+
+/* XXX the check on !blk_queue_plugged is redundant,
+ * implicitly checked in blk_plug_device */
+
+	if (!blk_queue_plugged(q)) {
+		blk_plug_device(q);
+		del_timer(&q->unplug_timer);
+		/* unplugging should not happen automatically... */
+	}
+	spin_unlock_irq(q->queue_lock);
+}
+
+static inline int drbd_crypto_is_hash(struct crypto_tfm *tfm)
+{
+        return (crypto_tfm_alg_type(tfm) & CRYPTO_ALG_TYPE_HASH_MASK)
+                == CRYPTO_ALG_TYPE_HASH;
+}
+
+#ifndef __CHECKER__
+# undef __cond_lock
+# define __cond_lock(x,c) (c)
+#endif
+
+#endif
diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c
index 3bb7c47..1fb6c31 100644
--- a/drivers/block/ps3vram.c
+++ b/drivers/block/ps3vram.c
@@ -123,7 +123,15 @@
 {
 	struct ps3vram_priv *priv = ps3_system_bus_get_drvdata(dev);
 	u32 *notify = ps3vram_get_notifier(priv->reports, NOTIFIER);
-	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	unsigned long timeout;
+
+	for (timeout = 20; timeout; timeout--) {
+		if (!notify[3])
+			return 0;
+		udelay(10);
+	}
+
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
 
 	do {
 		if (!notify[3])
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index b0e569b..2acdc60 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -867,11 +867,9 @@
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = bluecard_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -905,22 +903,16 @@
 			break;
 	}
 
-	if (i != 0) {
-		cs_error(link, RequestIO, i);
+	if (i != 0)
 		goto failed;
-	}
 
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		goto failed;
-	}
 
 	if (bluecard_open(info) != 0)
 		goto failed;
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index d58e22b..d814a27 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -659,11 +659,9 @@
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = bt3c_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -740,21 +738,16 @@
 		goto found_port;
 
 	BT_ERR("No usable port range found");
-	cs_error(link, RequestIO, -ENODEV);
 	goto failed;
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		goto failed;
-	}
 
 	if (bt3c_open(info) != 0)
 		goto failed;
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
index 4617bd1..d43b5cb 100644
--- a/drivers/bluetooth/btmrvl_debugfs.c
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -29,7 +29,6 @@
 	struct dentry *root_dir, *config_dir, *status_dir;
 
 	/* config */
-	struct dentry *drvdbg;
 	struct dentry *psmode;
 	struct dentry *pscmd;
 	struct dentry *hsmode;
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 411c7a7..523d197 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -131,6 +131,7 @@
 int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
 
 int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
+int btmrvl_enable_ps(struct btmrvl_private *priv);
 int btmrvl_prepare_command(struct btmrvl_private *priv);
 
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index e605563b..f97771c 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -189,6 +189,38 @@
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+int btmrvl_enable_ps(struct btmrvl_private *priv)
+{
+	struct sk_buff *skb;
+	struct btmrvl_cmd *cmd;
+
+	skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+	if (skb == NULL) {
+		BT_ERR("No free skb");
+		return -ENOMEM;
+	}
+
+	cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+	cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF,
+					BT_CMD_AUTO_SLEEP_MODE));
+	cmd->length = 1;
+
+	if (priv->btmrvl_dev.psmode)
+		cmd->data[0] = BT_PS_ENABLE;
+	else
+		cmd->data[0] = BT_PS_DISABLE;
+
+	bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+	skb->dev = (void *) priv->btmrvl_dev.hcidev;
+	skb_queue_head(&priv->adapter->tx_queue, skb);
+
+	BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
+
 static int btmrvl_enable_hs(struct btmrvl_private *priv)
 {
 	struct sk_buff *skb;
@@ -258,28 +290,7 @@
 
 	if (priv->btmrvl_dev.pscmd) {
 		priv->btmrvl_dev.pscmd = 0;
-
-		skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
-		if (skb == NULL) {
-			BT_ERR("No free skb");
-			return -ENOMEM;
-		}
-
-		cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
-		cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_AUTO_SLEEP_MODE));
-		cmd->length = 1;
-
-		if (priv->btmrvl_dev.psmode)
-			cmd->data[0] = BT_PS_ENABLE;
-		else
-			cmd->data[0] = BT_PS_DISABLE;
-
-		bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
-
-		skb->dev = (void *) priv->btmrvl_dev.hcidev;
-		skb_queue_head(&priv->adapter->tx_queue, skb);
-
-		BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+		btmrvl_enable_ps(priv);
 	}
 
 	if (priv->btmrvl_dev.hscmd) {
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 5b33b85..1e6eb1a 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -930,6 +930,8 @@
 	priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
 
 	btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+	priv->btmrvl_dev.psmode = 1;
+	btmrvl_enable_ps(priv);
 
 	return 0;
 
@@ -1001,3 +1003,5 @@
 MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL v2");
+MODULE_FIRMWARE("sd8688_helper.bin");
+MODULE_FIRMWARE("sd8688.bin");
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index efd689a..d339464 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -588,11 +588,9 @@
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = btuart_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -669,21 +667,16 @@
 		goto found_port;
 
 	BT_ERR("No usable port range found");
-	cs_error(link, RequestIO, -ENODEV);
 	goto failed;
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		goto failed;
-	}
 
 	if (btuart_open(info) != 0)
 		goto failed;
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index b881a9c..4f02a6f 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -573,11 +573,9 @@
 
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 
 	link->irq.Handler = dtl1_interrupt;
-	link->irq.Instance = info;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -622,16 +620,12 @@
 		goto failed;
 
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		goto failed;
-	}
 
 	if (dtl1_open(info) != 0)
 		goto failed;
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index d5cde6d..75952741 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -41,8 +41,6 @@
 
 #define VERSION "1.3"
 
-static int minor = MISC_DYNAMIC_MINOR;
-
 struct vhci_data {
 	struct hci_dev *hdev;
 
@@ -218,12 +216,6 @@
 	return POLLOUT | POLLWRNORM;
 }
 
-static int vhci_ioctl(struct inode *inode, struct file *file,
-					unsigned int cmd, unsigned long arg)
-{
-	return -EINVAL;
-}
-
 static int vhci_open(struct inode *inode, struct file *file)
 {
 	struct vhci_data *data;
@@ -284,10 +276,10 @@
 }
 
 static const struct file_operations vhci_fops = {
+	.owner		= THIS_MODULE,
 	.read		= vhci_read,
 	.write		= vhci_write,
 	.poll		= vhci_poll,
-	.ioctl		= vhci_ioctl,
 	.open		= vhci_open,
 	.release	= vhci_release,
 };
@@ -302,18 +294,12 @@
 {
 	BT_INFO("Virtual HCI driver ver %s", VERSION);
 
-	if (misc_register(&vhci_miscdev) < 0) {
-		BT_ERR("Can't register misc device with minor %d", minor);
-		return -EIO;
-	}
-
-	return 0;
+	return misc_register(&vhci_miscdev);
 }
 
 static void __exit vhci_exit(void)
 {
-	if (misc_deregister(&vhci_miscdev) < 0)
-		BT_ERR("Can't unregister misc device with minor %d", minor);
+	misc_deregister(&vhci_miscdev);
 }
 
 module_init(vhci_init);
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index 614da5b..e3749d0 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -3557,67 +3557,65 @@
 		.data		= &cdrom_sysctl_settings.info, 
 		.maxlen		= CDROM_STR_SIZE,
 		.mode		= 0444,
-		.proc_handler	= &cdrom_sysctl_info,
+		.proc_handler	= cdrom_sysctl_info,
 	},
 	{
 		.procname	= "autoclose",
 		.data		= &cdrom_sysctl_settings.autoclose,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cdrom_sysctl_handler,
+		.proc_handler	= cdrom_sysctl_handler,
 	},
 	{
 		.procname	= "autoeject",
 		.data		= &cdrom_sysctl_settings.autoeject,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cdrom_sysctl_handler,
+		.proc_handler	= cdrom_sysctl_handler,
 	},
 	{
 		.procname	= "debug",
 		.data		= &cdrom_sysctl_settings.debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cdrom_sysctl_handler,
+		.proc_handler	= cdrom_sysctl_handler,
 	},
 	{
 		.procname	= "lock",
 		.data		= &cdrom_sysctl_settings.lock,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cdrom_sysctl_handler,
+		.proc_handler	= cdrom_sysctl_handler,
 	},
 	{
 		.procname	= "check_media",
 		.data		= &cdrom_sysctl_settings.check,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &cdrom_sysctl_handler
+		.proc_handler	= cdrom_sysctl_handler
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table cdrom_cdrom_table[] = {
 	{
-		.ctl_name	= DEV_CDROM,
 		.procname	= "cdrom",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= cdrom_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 /* Make sure that /proc/sys/dev is there */
 static ctl_table cdrom_root_table[] = {
 	{
-		.ctl_name	= CTL_DEV,
 		.procname	= "dev",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= cdrom_cdrom_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 static struct ctl_table_header *cdrom_sysctl_header;
 
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index ccb1fa8..2fb3a48 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -56,9 +56,8 @@
 	  X on AMD Irongate, 761, and 762 chipsets.
 
 config AGP_AMD64
-	tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU
+	tristate "AMD Opteron/Athlon64 on-CPU GART support"
 	depends on AGP && X86
-	default y if GART_IOMMU
 	help
 	  This option gives you AGP support for the GLX component of
 	  X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs.
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 10e1f03..3cb56a0 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -62,6 +62,7 @@
 #define PCI_DEVICE_ID_INTEL_IGDNG_D_IG	    0x0042
 #define PCI_DEVICE_ID_INTEL_IGDNG_M_HB	    0x0044
 #define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB	    0x0062
+#define PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB    0x006a
 #define PCI_DEVICE_ID_INTEL_IGDNG_M_IG	    0x0046
 
 /* cover 915 and 945 variants */
@@ -96,7 +97,8 @@
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_B43_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
 		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \
-		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB)
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB || \
+		agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB)
 
 extern int agp_memory_reserved;
 
@@ -1358,6 +1360,7 @@
 	case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
 	case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
 	case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB:
+	case PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB:
 		*gtt_offset = *gtt_size = MB(2);
 		break;
 	default:
@@ -2359,6 +2362,8 @@
 	    "IGDNG/M", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
 	    "IGDNG/MA", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0,
+	    "IGDNG/MC2", NULL, &intel_i965_driver },
 	{ 0, 0, 0, NULL, NULL, NULL }
 };
 
@@ -2560,6 +2565,7 @@
 	ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
 	ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB),
+	ID(PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB),
 	{ }
 };
 
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 70a770a..e481c59 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -675,36 +675,33 @@
 
 static ctl_table hpet_table[] = {
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "max-user-freq",
 	 .data = &hpet_max_freq,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec,
+	 .proc_handler = proc_dointvec,
 	 },
-	{.ctl_name = 0}
+	{}
 };
 
 static ctl_table hpet_root[] = {
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "hpet",
 	 .maxlen = 0,
 	 .mode = 0555,
 	 .child = hpet_table,
 	 },
-	{.ctl_name = 0}
+	{}
 };
 
 static ctl_table dev_root[] = {
 	{
-	 .ctl_name = CTL_DEV,
 	 .procname = "dev",
 	 .maxlen = 0,
 	 .mode = 0555,
 	 .child = hpet_root,
 	 },
-	{.ctl_name = 0}
+	{}
 };
 
 static struct ctl_table_header *sysctl_header;
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index 2e66b5f..0dec5da 100644
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -660,26 +660,23 @@
 #include <linux/sysctl.h>
 
 static ctl_table ipmi_table[] = {
-	{ .ctl_name	= DEV_IPMI_POWEROFF_POWERCYCLE,
-	  .procname	= "poweroff_powercycle",
+	{ .procname	= "poweroff_powercycle",
 	  .data		= &poweroff_powercycle,
 	  .maxlen	= sizeof(poweroff_powercycle),
 	  .mode		= 0644,
-	  .proc_handler	= &proc_dointvec },
+	  .proc_handler	= proc_dointvec },
 	{ }
 };
 
 static ctl_table ipmi_dir_table[] = {
-	{ .ctl_name	= DEV_IPMI,
-	  .procname	= "ipmi",
+	{ .procname	= "ipmi",
 	  .mode		= 0555,
 	  .child	= ipmi_table },
 	{ }
 };
 
 static ctl_table ipmi_root_table[] = {
-	{ .ctl_name	= CTL_DEV,
-	  .procname	= "dev",
+	{ .procname	= "dev",
 	  .mode		= 0555,
 	  .child	= ipmi_dir_table },
 	{ }
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 737be95..950837c 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -1249,7 +1249,7 @@
 
 	if (keycode >= NR_KEYS)
 		if (keycode >= KEY_BRL_DOT1 && keycode <= KEY_BRL_DOT8)
-			keysym = K(KT_BRL, keycode - KEY_BRL_DOT1 + 1);
+			keysym = U(K(KT_BRL, keycode - KEY_BRL_DOT1 + 1));
 		else
 			return;
 	else
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index c250a31..2db4c0a 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -23,8 +23,6 @@
   * All rights reserved. Licensed under dual BSD/GPL license.
   */
 
-/* #define PCMCIA_DEBUG 6 */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -47,18 +45,17 @@
 
 /* #define ATR_CSUM */
 
-#ifdef PCMCIA_DEBUG
-#define reader_to_dev(x)	(&handle_to_dev(x->p_dev))
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0600);
-#define DEBUGP(n, rdr, x, args...) do { 				\
-	if (pc_debug >= (n))						\
-		dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, 	\
-			   __func__ , ## args);			\
+#define reader_to_dev(x)	(&x->p_dev->dev)
+
+/* n (debug level) is ignored */
+/* additional debug output may be enabled by re-compiling with
+ * CM4000_DEBUG set */
+/* #define CM4000_DEBUG */
+#define DEBUGP(n, rdr, x, args...) do { 		\
+		dev_dbg(reader_to_dev(rdr), "%s:" x, 	\
+			   __func__ , ## args);		\
 	} while (0)
-#else
-#define DEBUGP(n, rdr, x, args...)
-#endif
+
 static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
 
 #define	T_1SEC		(HZ)
@@ -174,14 +171,13 @@
 /* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9}
 };
 
-#ifndef PCMCIA_DEBUG
+#ifndef CM4000_DEBUG
 #define	xoutb	outb
 #define	xinb	inb
 #else
 static inline void xoutb(unsigned char val, unsigned short port)
 {
-	if (pc_debug >= 7)
-		printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port);
+	pr_debug("outb(val=%.2x,port=%.4x)\n", val, port);
 	outb(val, port);
 }
 static inline unsigned char xinb(unsigned short port)
@@ -189,8 +185,7 @@
 	unsigned char val;
 
 	val = inb(port);
-	if (pc_debug >= 7)
-		printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port);
+	pr_debug("%.2x=inb(%.4x)\n", val, port);
 
 	return val;
 }
@@ -514,12 +509,10 @@
 	for (i = 0; i < 4; i++) {
 		xoutb(i, REG_BUF_ADDR(iobase));
 		xoutb(dev->pts[i], REG_BUF_DATA(iobase));	/* buf data */
-#ifdef PCMCIA_DEBUG
-		if (pc_debug >= 5)
-			printk("0x%.2x ", dev->pts[i]);
+#ifdef CM4000_DEBUG
+		pr_debug("0x%.2x ", dev->pts[i]);
 	}
-	if (pc_debug >= 5)
-		printk("\n");
+	pr_debug("\n");
 #else
 	}
 #endif
@@ -579,14 +572,13 @@
 		pts_reply[i] = inb(REG_BUF_DATA(iobase));
 	}
 
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
 	DEBUGP(2, dev, "PTSreply: ");
 	for (i = 0; i < num_bytes_read; i++) {
-		if (pc_debug >= 5)
-			printk("0x%.2x ", pts_reply[i]);
+		pr_debug("0x%.2x ", pts_reply[i]);
 	}
-	printk("\n");
-#endif	/* PCMCIA_DEBUG */
+	pr_debug("\n");
+#endif	/* CM4000_DEBUG */
 
 	DEBUGP(5, dev, "Clear Tactive in Flags1\n");
 	xoutb(0x20, REG_FLAGS1(iobase));
@@ -655,7 +647,7 @@
 
 	DEBUGP(5, dev, "Delete timer\n");
 	del_timer_sync(&dev->timer);
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
 	dev->monitor_running = 0;
 #endif
 
@@ -898,7 +890,7 @@
 				DEBUGP(4, dev, "ATR checksum (0x%.2x, should "
 				       "be zero) failed\n", dev->atr_csum);
 			}
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
 			else if (test_bit(IS_BAD_LENGTH, &dev->flags)) {
 				DEBUGP(4, dev, "ATR length error\n");
 			} else {
@@ -1415,7 +1407,7 @@
 	int size;
 	int rc;
 	void __user *argp = (void __user *)arg;
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
 	char *ioctl_names[CM_IOC_MAXNR + 1] = {
 		[_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS",
 		[_IOC_NR(CM_IOCGATR)] "CM_IOCGATR",
@@ -1423,9 +1415,9 @@
 		[_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS",
 		[_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL",
 	};
-#endif
 	DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode),
 	       iminor(inode), ioctl_names[_IOC_NR(cmd)]);
+#endif
 
 	lock_kernel();
 	rc = -ENODEV;
@@ -1523,7 +1515,7 @@
 		}
 	case CM_IOCARDOFF:
 
-#ifdef PCMCIA_DEBUG
+#ifdef CM4000_DEBUG
 		DEBUGP(4, dev, "... in CM_IOCARDOFF\n");
 		if (dev->flags0 & 0x01) {
 			DEBUGP(4, dev, "    Card inserted\n");
@@ -1625,18 +1617,9 @@
 
 		}
 		break;
-#ifdef PCMCIA_DEBUG
-	case CM_IOSDBGLVL:	/* set debug log level */
-		{
-			int old_pc_debug = 0;
-
-			old_pc_debug = pc_debug;
-			if (copy_from_user(&pc_debug, argp, sizeof(int)))
-				rc = -EFAULT;
-			else if (old_pc_debug != pc_debug)
-				DEBUGP(0, dev, "Changed debug log level "
-				       "to %i\n", pc_debug);
-		}
+#ifdef CM4000_DEBUG
+	case CM_IOSDBGLVL:
+		rc = -ENOTTY;
 		break;
 #endif
 	default:
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 4f0723b..a6a70e4 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -17,8 +17,6 @@
  * All rights reserved, Dual BSD/GPL Licensed.
  */
 
-/* #define PCMCIA_DEBUG 6 */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -41,18 +39,16 @@
 #include "cm4040_cs.h"
 
 
-#ifdef PCMCIA_DEBUG
-#define reader_to_dev(x)	(&handle_to_dev(x->p_dev))
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0600);
-#define DEBUGP(n, rdr, x, args...) do { 				\
-	if (pc_debug >= (n)) 						\
-		dev_printk(KERN_DEBUG, reader_to_dev(rdr), "%s:" x, 	\
-			   __func__ , ##args); 			\
+#define reader_to_dev(x)	(&x->p_dev->dev)
+
+/* n (debug level) is ignored */
+/* additional debug output may be enabled by re-compiling with
+ * CM4040_DEBUG set */
+/* #define CM4040_DEBUG */
+#define DEBUGP(n, rdr, x, args...) do { 		\
+		dev_dbg(reader_to_dev(rdr), "%s:" x, 	\
+			   __func__ , ## args);		\
 	} while (0)
-#else
-#define DEBUGP(n, rdr, x, args...)
-#endif
 
 static char *version =
 "OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
@@ -90,14 +86,13 @@
 
 static struct pcmcia_device *dev_table[CM_MAX_DEV];
 
-#ifndef PCMCIA_DEBUG
+#ifndef CM4040_DEBUG
 #define	xoutb	outb
 #define	xinb	inb
 #else
 static inline void xoutb(unsigned char val, unsigned short port)
 {
-	if (pc_debug >= 7)
-		printk(KERN_DEBUG "outb(val=%.2x,port=%.4x)\n", val, port);
+	pr_debug("outb(val=%.2x,port=%.4x)\n", val, port);
 	outb(val, port);
 }
 
@@ -106,8 +101,7 @@
 	unsigned char val;
 
 	val = inb(port);
-	if (pc_debug >= 7)
-		printk(KERN_DEBUG "%.2x=inb(%.4x)\n", val, port);
+	pr_debug("%.2x=inb(%.4x)\n", val, port);
 	return val;
 }
 #endif
@@ -260,23 +254,22 @@
 			return -EIO;
 		}
 	  	dev->r_buf[i] = xinb(iobase + REG_OFFSET_BULK_IN);
-#ifdef PCMCIA_DEBUG
-		if (pc_debug >= 6)
-			printk(KERN_DEBUG "%lu:%2x ", i, dev->r_buf[i]);
+#ifdef CM4040_DEBUG
+		pr_debug("%lu:%2x ", i, dev->r_buf[i]);
 	}
-	printk("\n");
+	pr_debug("\n");
 #else
 	}
 #endif
 
 	bytes_to_read = 5 + le32_to_cpu(*(__le32 *)&dev->r_buf[1]);
 
-	DEBUGP(6, dev, "BytesToRead=%lu\n", bytes_to_read);
+	DEBUGP(6, dev, "BytesToRead=%zu\n", bytes_to_read);
 
 	min_bytes_to_read = min(count, bytes_to_read + 5);
 	min_bytes_to_read = min_t(size_t, min_bytes_to_read, READ_WRITE_BUFFER_SIZE);
 
-	DEBUGP(6, dev, "Min=%lu\n", min_bytes_to_read);
+	DEBUGP(6, dev, "Min=%zu\n", min_bytes_to_read);
 
 	for (i = 0; i < (min_bytes_to_read-5); i++) {
 		rc = wait_for_bulk_in_ready(dev);
@@ -288,11 +281,10 @@
 			return -EIO;
 		}
 		dev->r_buf[i+5] = xinb(iobase + REG_OFFSET_BULK_IN);
-#ifdef PCMCIA_DEBUG
-		if (pc_debug >= 6)
-			printk(KERN_DEBUG "%lu:%2x ", i, dev->r_buf[i]);
+#ifdef CM4040_DEBUG
+		pr_debug("%lu:%2x ", i, dev->r_buf[i]);
 	}
-	printk("\n");
+	pr_debug("\n");
 #else
 	}
 #endif
@@ -547,7 +539,7 @@
 	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
 
 	rc = pcmcia_request_io(p_dev, &p_dev->io);
-	dev_printk(KERN_INFO, &handle_to_dev(p_dev),
+	dev_printk(KERN_INFO, &p_dev->dev,
 		   "pcmcia_request_io returned 0x%x\n", rc);
 	return rc;
 }
@@ -569,7 +561,7 @@
 
 	fail_rc = pcmcia_request_configuration(link, &link->conf);
 	if (fail_rc != 0) {
-		dev_printk(KERN_INFO, &handle_to_dev(link),
+		dev_printk(KERN_INFO, &link->dev,
 			   "pcmcia_request_configuration failed 0x%x\n",
 			   fail_rc);
 		goto cs_release;
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index 4c1820c..99cffda 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -1213,12 +1213,12 @@
 
 irqreturn_t ipwireless_interrupt(int irq, void *dev_id)
 {
-	struct ipw_hardware *hw = dev_id;
+	struct ipw_dev *ipw = dev_id;
 
-	if (hw->hw_version == HW_VERSION_1)
-		return ipwireless_handle_v1_interrupt(irq, hw);
+	if (ipw->hardware->hw_version == HW_VERSION_1)
+		return ipwireless_handle_v1_interrupt(irq, ipw->hardware);
 	else
-		return ipwireless_handle_v2_v3_interrupt(irq, hw);
+		return ipwireless_handle_v2_v3_interrupt(irq, ipw->hardware);
 }
 
 static void flush_packets_to_hw(struct ipw_hardware *hw)
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 5216fce..dff24da 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -65,10 +65,7 @@
 	struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev,
 			work_reboot);
 	struct pcmcia_device *link = ipw->link;
-	int ret = pcmcia_reset_card(link->socket);
-
-	if (ret != 0)
-		cs_error(link, ResetCard, ret);
+	pcmcia_reset_card(link->socket);
 }
 
 static void signalled_reboot_callback(void *callback_data)
@@ -79,208 +76,127 @@
 	schedule_work(&ipw->work_reboot);
 }
 
-static int config_ipwireless(struct ipw_dev *ipw)
+static int ipwireless_probe(struct pcmcia_device *p_dev,
+			    cistpl_cftable_entry_t *cfg,
+			    cistpl_cftable_entry_t *dflt,
+			    unsigned int vcc,
+			    void *priv_data)
 {
-	struct pcmcia_device *link = ipw->link;
-	int ret;
-	tuple_t tuple;
-	unsigned short buf[64];
-	cisparse_t parse;
-	unsigned short cor_value;
+	struct ipw_dev *ipw = priv_data;
+	struct resource *io_resource;
 	memreq_t memreq_attr_memory;
 	memreq_t memreq_common_memory;
+	int ret;
 
-	ipw->is_v2_card = 0;
-
-	tuple.Attributes = 0;
-	tuple.TupleData = (cisdata_t *) buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	tuple.DesiredTuple = RETURN_FIRST_TUPLE;
-
-	ret = pcmcia_get_first_tuple(link, &tuple);
-
-	while (ret == 0) {
-		ret = pcmcia_get_tuple_data(link, &tuple);
-
-		if (ret != 0) {
-			cs_error(link, GetTupleData, ret);
-			goto exit0;
-		}
-		ret = pcmcia_get_next_tuple(link, &tuple);
-	}
-
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
-	ret = pcmcia_get_first_tuple(link, &tuple);
-
-	if (ret != 0) {
-		cs_error(link, GetFirstTuple, ret);
-		goto exit0;
-	}
-
-	ret = pcmcia_get_tuple_data(link, &tuple);
-
-	if (ret != 0) {
-		cs_error(link, GetTupleData, ret);
-		goto exit0;
-	}
-
-	ret = pcmcia_parse_tuple(&tuple, &parse);
-
-	if (ret != 0) {
-		cs_error(link, ParseTuple, ret);
-		goto exit0;
-	}
-
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
-	link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
-	link->io.IOAddrLines = 16;
-
-	link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1;
+	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+	p_dev->io.BasePort1 = cfg->io.win[0].base;
+	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+	p_dev->io.IOAddrLines = 16;
 
 	/* 0x40 causes it to generate level mode interrupts. */
 	/* 0x04 enables IREQ pin. */
-	cor_value = parse.cftable_entry.index | 0x44;
-	link->conf.ConfigIndex = cor_value;
+	p_dev->conf.ConfigIndex = cfg->index | 0x44;
+	ret = pcmcia_request_io(p_dev, &p_dev->io);
+	if (ret)
+		return ret;
 
-	/* IRQ and I/O settings */
-	tuple.DesiredTuple = CISTPL_CONFIG;
+	io_resource = request_region(p_dev->io.BasePort1, p_dev->io.NumPorts1,
+				IPWIRELESS_PCCARD_NAME);
 
-	ret = pcmcia_get_first_tuple(link, &tuple);
+	if (cfg->mem.nwin == 0)
+		return 0;
 
-	if (ret != 0) {
-		cs_error(link, GetFirstTuple, ret);
-		goto exit0;
-	}
+	ipw->request_common_memory.Attributes =
+		WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
+	ipw->request_common_memory.Base = cfg->mem.win[0].host_addr;
+	ipw->request_common_memory.Size = cfg->mem.win[0].len;
+	if (ipw->request_common_memory.Size < 0x1000)
+		ipw->request_common_memory.Size = 0x1000;
+	ipw->request_common_memory.AccessSpeed = 0;
 
-	ret = pcmcia_get_tuple_data(link, &tuple);
-
-	if (ret != 0) {
-		cs_error(link, GetTupleData, ret);
-		goto exit0;
-	}
-
-	ret = pcmcia_parse_tuple(&tuple, &parse);
-
-	if (ret != 0) {
-		cs_error(link, GetTupleData, ret);
-		goto exit0;
-	}
-	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-	link->conf.IntType = INT_MEMORY_AND_IO;
-
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.Handler = ipwireless_interrupt;
-	link->irq.Instance = ipw->hardware;
-
-	ret = pcmcia_request_io(link, &link->io);
-
-	if (ret != 0) {
-		cs_error(link, RequestIO, ret);
-		goto exit0;
-	}
-
-	request_region(link->io.BasePort1, link->io.NumPorts1,
-			IPWIRELESS_PCCARD_NAME);
-
-	/* memory settings */
-
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
-	ret = pcmcia_get_first_tuple(link, &tuple);
-
-	if (ret != 0) {
-		cs_error(link, GetFirstTuple, ret);
-		goto exit1;
-	}
-
-	ret = pcmcia_get_tuple_data(link, &tuple);
-
-	if (ret != 0) {
-		cs_error(link, GetTupleData, ret);
-		goto exit1;
-	}
-
-	ret = pcmcia_parse_tuple(&tuple, &parse);
-
-	if (ret != 0) {
-		cs_error(link, ParseTuple, ret);
-		goto exit1;
-	}
-
-	if (parse.cftable_entry.mem.nwin > 0) {
-		ipw->request_common_memory.Attributes =
-			WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE;
-		ipw->request_common_memory.Base =
-			parse.cftable_entry.mem.win[0].host_addr;
-		ipw->request_common_memory.Size = parse.cftable_entry.mem.win[0].len;
-		if (ipw->request_common_memory.Size < 0x1000)
-			ipw->request_common_memory.Size = 0x1000;
-		ipw->request_common_memory.AccessSpeed = 0;
-
-		ret = pcmcia_request_window(&link, &ipw->request_common_memory,
+	ret = pcmcia_request_window(p_dev, &ipw->request_common_memory,
 				&ipw->handle_common_memory);
 
-		if (ret != 0) {
-			cs_error(link, RequestWindow, ret);
-			goto exit1;
-		}
+	if (ret != 0)
+		goto exit1;
 
-		memreq_common_memory.CardOffset =
-			parse.cftable_entry.mem.win[0].card_addr;
-		memreq_common_memory.Page = 0;
+	memreq_common_memory.CardOffset = cfg->mem.win[0].card_addr;
+	memreq_common_memory.Page = 0;
 
-		ret = pcmcia_map_mem_page(ipw->handle_common_memory,
+	ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory,
 				&memreq_common_memory);
 
-		if (ret != 0) {
-			cs_error(link, MapMemPage, ret);
-			goto exit1;
-		}
+	if (ret != 0)
+		goto exit2;
 
-		ipw->is_v2_card =
-			parse.cftable_entry.mem.win[0].len == 0x100;
+	ipw->is_v2_card = cfg->mem.win[0].len == 0x100;
 
-		ipw->common_memory = ioremap(ipw->request_common_memory.Base,
+	ipw->common_memory = ioremap(ipw->request_common_memory.Base,
 				ipw->request_common_memory.Size);
-		request_mem_region(ipw->request_common_memory.Base,
-				ipw->request_common_memory.Size, IPWIRELESS_PCCARD_NAME);
+	request_mem_region(ipw->request_common_memory.Base,
+			ipw->request_common_memory.Size,
+			IPWIRELESS_PCCARD_NAME);
 
-		ipw->request_attr_memory.Attributes =
-			WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE;
-		ipw->request_attr_memory.Base = 0;
-		ipw->request_attr_memory.Size = 0;	/* this used to be 0x1000 */
-		ipw->request_attr_memory.AccessSpeed = 0;
+	ipw->request_attr_memory.Attributes =
+		WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE;
+	ipw->request_attr_memory.Base = 0;
+	ipw->request_attr_memory.Size = 0;	/* this used to be 0x1000 */
+	ipw->request_attr_memory.AccessSpeed = 0;
 
-		ret = pcmcia_request_window(&link, &ipw->request_attr_memory,
+	ret = pcmcia_request_window(p_dev, &ipw->request_attr_memory,
 				&ipw->handle_attr_memory);
 
-		if (ret != 0) {
-			cs_error(link, RequestWindow, ret);
-			goto exit2;
-		}
+	if (ret != 0)
+		goto exit2;
 
-		memreq_attr_memory.CardOffset = 0;
-		memreq_attr_memory.Page = 0;
+	memreq_attr_memory.CardOffset = 0;
+	memreq_attr_memory.Page = 0;
 
-		ret = pcmcia_map_mem_page(ipw->handle_attr_memory,
+	ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory,
 				&memreq_attr_memory);
 
-		if (ret != 0) {
-			cs_error(link, MapMemPage, ret);
-			goto exit2;
-		}
+	if (ret != 0)
+		goto exit3;
 
-		ipw->attr_memory = ioremap(ipw->request_attr_memory.Base,
+	ipw->attr_memory = ioremap(ipw->request_attr_memory.Base,
 				ipw->request_attr_memory.Size);
-		request_mem_region(ipw->request_attr_memory.Base, ipw->request_attr_memory.Size,
-				IPWIRELESS_PCCARD_NAME);
-	}
+	request_mem_region(ipw->request_attr_memory.Base,
+			ipw->request_attr_memory.Size, IPWIRELESS_PCCARD_NAME);
+
+	return 0;
+
+exit3:
+	pcmcia_release_window(p_dev, ipw->handle_attr_memory);
+exit2:
+	if (ipw->common_memory) {
+		release_mem_region(ipw->request_common_memory.Base,
+				ipw->request_common_memory.Size);
+		iounmap(ipw->common_memory);
+		pcmcia_release_window(p_dev, ipw->handle_common_memory);
+	} else
+		pcmcia_release_window(p_dev, ipw->handle_common_memory);
+exit1:
+	release_resource(io_resource);
+	pcmcia_disable_device(p_dev);
+	return -1;
+}
+
+static int config_ipwireless(struct ipw_dev *ipw)
+{
+	struct pcmcia_device *link = ipw->link;
+	int ret = 0;
+
+	ipw->is_v2_card = 0;
+
+	ret = pcmcia_loop_config(link, ipwireless_probe, ipw);
+	if (ret != 0)
+		return ret;
+
+	link->conf.Attributes = CONF_ENABLE_IRQ;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+	link->irq.Handler = ipwireless_interrupt;
 
 	INIT_WORK(&ipw->work_reboot, signalled_reboot_work);
 
@@ -291,10 +207,8 @@
 
 	ret = pcmcia_request_irq(link, &link->irq);
 
-	if (ret != 0) {
-		cs_error(link, RequestIRQ, ret);
-		goto exit3;
-	}
+	if (ret != 0)
+		goto exit;
 
 	printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
 			ipw->is_v2_card ? "V2/V3" : "V1");
@@ -316,12 +230,12 @@
 
 	ipw->network = ipwireless_network_create(ipw->hardware);
 	if (!ipw->network)
-		goto exit3;
+		goto exit;
 
 	ipw->tty = ipwireless_tty_create(ipw->hardware, ipw->network,
 			ipw->nodes);
 	if (!ipw->tty)
-		goto exit3;
+		goto exit;
 
 	ipwireless_init_hardware_v2_v3(ipw->hardware);
 
@@ -331,35 +245,27 @@
 	 */
 	ret = pcmcia_request_configuration(link, &link->conf);
 
-	if (ret != 0) {
-		cs_error(link, RequestConfiguration, ret);
-		goto exit4;
-	}
+	if (ret != 0)
+		goto exit;
 
 	link->dev_node = &ipw->nodes[0];
 
 	return 0;
 
-exit4:
-	pcmcia_disable_device(link);
-exit3:
+exit:
 	if (ipw->attr_memory) {
 		release_mem_region(ipw->request_attr_memory.Base,
 				ipw->request_attr_memory.Size);
 		iounmap(ipw->attr_memory);
-		pcmcia_release_window(ipw->handle_attr_memory);
-		pcmcia_disable_device(link);
+		pcmcia_release_window(link, ipw->handle_attr_memory);
 	}
-exit2:
 	if (ipw->common_memory) {
 		release_mem_region(ipw->request_common_memory.Base,
 				ipw->request_common_memory.Size);
 		iounmap(ipw->common_memory);
-		pcmcia_release_window(ipw->handle_common_memory);
+		pcmcia_release_window(link, ipw->handle_common_memory);
 	}
-exit1:
 	pcmcia_disable_device(link);
-exit0:
 	return -1;
 }
 
@@ -378,9 +284,9 @@
 		iounmap(ipw->attr_memory);
 	}
 	if (ipw->common_memory)
-		pcmcia_release_window(ipw->handle_common_memory);
+		pcmcia_release_window(ipw->link, ipw->handle_common_memory);
 	if (ipw->attr_memory)
-		pcmcia_release_window(ipw->handle_attr_memory);
+		pcmcia_release_window(ipw->link, ipw->handle_attr_memory);
 
 	/* Break the link with Card Services */
 	pcmcia_disable_device(ipw->link);
@@ -406,7 +312,6 @@
 
 	ipw->link = link;
 	link->priv = ipw;
-	link->irq.Instance = ipw;
 
 	/* Link this device into our device list. */
 	link->dev_node = &ipw->nodes[0];
@@ -421,7 +326,6 @@
 	ret = config_ipwireless(ipw);
 
 	if (ret != 0) {
-		cs_error(link, RegisterClient, ret);
 		ipwireless_detach(link);
 		return ret;
 	}
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index caf6e4d..c31a0d9 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -554,7 +554,6 @@
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1   = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;
 
     link->conf.Attributes = 0;
@@ -572,69 +571,51 @@
 /* Card has been inserted.
  */
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int mgslpc_ioprobe(struct pcmcia_device *p_dev,
+			  cistpl_cftable_entry_t *cfg,
+			  cistpl_cftable_entry_t *dflt,
+			  unsigned int vcc,
+			  void *priv_data)
+{
+	if (cfg->io.nwin > 0) {
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(cfg->io.flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(cfg->io.flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = cfg->io.win[0].base;
+		p_dev->io.NumPorts1 = cfg->io.win[0].len;
+		return pcmcia_request_io(p_dev, &p_dev->io);
+	}
+	return -ENODEV;
+}
 
 static int mgslpc_config(struct pcmcia_device *link)
 {
     MGSLPC_INFO *info = link->priv;
-    tuple_t tuple;
-    cisparse_t parse;
-    int last_fn, last_ret;
-    u_char buf[64];
-    cistpl_cftable_entry_t dflt = { 0 };
-    cistpl_cftable_entry_t *cfg;
+    int ret;
 
     if (debug_level >= DEBUG_LEVEL_INFO)
 	    printk("mgslpc_config(0x%p)\n", link);
 
-    tuple.Attributes = 0;
-    tuple.TupleData = buf;
-    tuple.TupleDataMax = sizeof(buf);
-    tuple.TupleOffset = 0;
-
-    /* get CIS configuration entry */
-
-    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-
-    cfg = &(parse.cftable_entry);
-    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-    CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
-
-    if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
-    if (cfg->index == 0)
-	    goto cs_failed;
-
-    link->conf.ConfigIndex = cfg->index;
-    link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-    /* IO window settings */
-    link->io.NumPorts1 = 0;
-    if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-	    cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-	    link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	    if (!(io->flags & CISTPL_IO_8BIT))
-		    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	    if (!(io->flags & CISTPL_IO_16BIT))
-		    link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-	    link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-	    link->io.BasePort1 = io->win[0].base;
-	    link->io.NumPorts1 = io->win[0].len;
-	    CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
-    }
+    ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
+    if (ret != 0)
+	    goto failed;
 
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 8;
     link->conf.Present = PRESENT_OPTION;
 
-    link->irq.Attributes |= IRQ_HANDLE_PRESENT;
     link->irq.Handler     = mgslpc_isr;
-    link->irq.Instance    = info;
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
 
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     info->io_base = link->io.BasePort1;
     info->irq_level = link->irq.AssignedIRQ;
@@ -654,8 +635,7 @@
     printk("\n");
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
+failed:
     mgslpc_release((u_long)link);
     return -ENODEV;
 }
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 62f282e..d86c0bc 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -431,30 +431,25 @@
 
 static struct ctl_table pty_table[] = {
 	{
-		.ctl_name	= PTY_MAX,
 		.procname	= "max",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.data		= &pty_limit,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &pty_limit_min,
 		.extra2		= &pty_limit_max,
 	}, {
-		.ctl_name	= PTY_NR,
 		.procname	= "nr",
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
 		.data		= &pty_count,
-		.proc_handler	= &proc_dointvec,
-	}, {
-		.ctl_name	= 0
-	}
+		.proc_handler	= proc_dointvec,
+	}, 
+	{}
 };
 
 static struct ctl_table pty_kern_table[] = {
 	{
-		.ctl_name	= KERN_PTY,
 		.procname	= "pty",
 		.mode		= 0555,
 		.child		= pty_table,
@@ -464,7 +459,6 @@
 
 static struct ctl_table pty_root_table[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= pty_kern_table,
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 04b505e..dcd08635 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1257,94 +1257,54 @@
 	return proc_dostring(&fake_table, write, buffer, lenp, ppos);
 }
 
-static int uuid_strategy(ctl_table *table,
-			 void __user *oldval, size_t __user *oldlenp,
-			 void __user *newval, size_t newlen)
-{
-	unsigned char tmp_uuid[16], *uuid;
-	unsigned int len;
-
-	if (!oldval || !oldlenp)
-		return 1;
-
-	uuid = table->data;
-	if (!uuid) {
-		uuid = tmp_uuid;
-		uuid[8] = 0;
-	}
-	if (uuid[8] == 0)
-		generate_random_uuid(uuid);
-
-	if (get_user(len, oldlenp))
-		return -EFAULT;
-	if (len) {
-		if (len > 16)
-			len = 16;
-		if (copy_to_user(oldval, uuid, len) ||
-		    put_user(len, oldlenp))
-			return -EFAULT;
-	}
-	return 1;
-}
-
 static int sysctl_poolsize = INPUT_POOL_WORDS * 32;
 ctl_table random_table[] = {
 	{
-		.ctl_name 	= RANDOM_POOLSIZE,
 		.procname	= "poolsize",
 		.data		= &sysctl_poolsize,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= RANDOM_ENTROPY_COUNT,
 		.procname	= "entropy_avail",
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 		.data		= &input_pool.entropy_count,
 	},
 	{
-		.ctl_name	= RANDOM_READ_THRESH,
 		.procname	= "read_wakeup_threshold",
 		.data		= &random_read_wakeup_thresh,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_read_thresh,
 		.extra2		= &max_read_thresh,
 	},
 	{
-		.ctl_name	= RANDOM_WRITE_THRESH,
 		.procname	= "write_wakeup_threshold",
 		.data		= &random_write_wakeup_thresh,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_write_thresh,
 		.extra2		= &max_write_thresh,
 	},
 	{
-		.ctl_name	= RANDOM_BOOT_ID,
 		.procname	= "boot_id",
 		.data		= &sysctl_bootid,
 		.maxlen		= 16,
 		.mode		= 0444,
-		.proc_handler	= &proc_do_uuid,
-		.strategy	= &uuid_strategy,
+		.proc_handler	= proc_do_uuid,
 	},
 	{
-		.ctl_name	= RANDOM_UUID,
 		.procname	= "uuid",
 		.maxlen		= 16,
 		.mode		= 0444,
-		.proc_handler	= &proc_do_uuid,
-		.strategy	= &uuid_strategy,
+		.proc_handler	= proc_do_uuid,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif 	/* CONFIG_SYSCTL */
 
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index bc4ab3e..95acb8c 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -282,34 +282,31 @@
  */
 static ctl_table rtc_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "max-user-freq",
 		.data		= &rtc_max_user_freq,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table rtc_root[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "rtc",
 		.mode		= 0555,
 		.child		= rtc_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table dev_root[] = {
 	{
-		.ctl_name	= CTL_DEV,
 		.procname	= "dev",
 		.mode		= 0555,
 		.child		= rtc_root,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header *sysctl_header;
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 47c2d27..f06bb37 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -31,7 +31,7 @@
 
 enum tpm_const {
 	TPM_MINOR = 224,	/* officially assigned */
-	TPM_BUFSIZE = 2048,
+	TPM_BUFSIZE = 4096,
 	TPM_NUM_DEVICES = 256,
 };
 
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 0b73e4e..2405f17 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -257,6 +257,10 @@
 	return size;
 }
 
+static int itpm;
+module_param(itpm, bool, 0444);
+MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
+
 /*
  * If interrupts are used (signaled by an irq set in the vendor structure)
  * tpm.c can skip polling for the data to be available as the interrupt is
@@ -293,7 +297,7 @@
 		wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
 			      &chip->vendor.int_queue);
 		status = tpm_tis_status(chip);
-		if ((status & TPM_STS_DATA_EXPECT) == 0) {
+		if (!itpm && (status & TPM_STS_DATA_EXPECT) == 0) {
 			rc = -EIO;
 			goto out_err;
 		}
@@ -467,6 +471,10 @@
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
+	if (itpm)
+		dev_info(dev, "Intel iTPM workaround enabled\n");
+
+
 	/* Figure out the capabilities */
 	intfcaps =
 	    ioread32(chip->vendor.iobase +
@@ -629,6 +637,7 @@
 	{"", 0},		/* User Specified */
 	{"", 0}			/* Terminator */
 };
+MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl);
 
 static __devexit void tpm_tis_pnp_remove(struct pnp_dev *dev)
 {
diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index 2e8552d..c63f3d33 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -219,8 +219,11 @@
 
 	/* if non-blocking mode is set we can pass directly to open unless
 	   the port has just hung up or is in another error state */
-	if ((filp->f_flags & O_NONBLOCK) ||
-			(tty->flags & (1 << TTY_IO_ERROR))) {
+	if (tty->flags & (1 << TTY_IO_ERROR)) {
+		port->flags |= ASYNC_NORMAL_ACTIVE;
+		return 0;
+	}
+	if (filp->f_flags & O_NONBLOCK) {
 		/* Indicate we are open */
 		if (tty->termios->c_cflag & CBAUD)
 			tty_port_raise_dtr_rts(port);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 0c80c68..1e3d728 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -161,6 +161,8 @@
 static int printable;		/* Is console ready for printing? */
 int default_utf8 = true;
 module_param(default_utf8, int, S_IRUGO | S_IWUSR);
+int global_cursor_default = -1;
+module_param(global_cursor_default, int, S_IRUGO | S_IWUSR);
 
 /*
  * ignore_poke: don't unblank the screen when things are typed.  This is
@@ -775,6 +777,12 @@
 		vc_cons[currcons].d = NULL;
 		return -ENOMEM;
 	    }
+
+	    /* If no drivers have overridden us and the user didn't pass a
+	       boot option, default to displaying the cursor */
+	    if (global_cursor_default == -1)
+		    global_cursor_default = 1;
+
 	    vc_init(vc, vc->vc_rows, vc->vc_cols, 1);
 	    vcs_make_sysfs(currcons);
 	    atomic_notifier_call_chain(&vt_notifier_list, VT_ALLOCATE, &param);
@@ -1616,7 +1624,7 @@
 	vc->vc_decscnm		= 0;
 	vc->vc_decom		= 0;
 	vc->vc_decawm		= 1;
-	vc->vc_deccm		= 1;
+	vc->vc_deccm		= global_cursor_default;
 	vc->vc_decim		= 0;
 
 	set_kbd(vc, decarm);
@@ -4078,6 +4086,7 @@
 EXPORT_SYMBOL(console_blank_hook);
 EXPORT_SYMBOL(console_blanked);
 EXPORT_SYMBOL(vc_cons);
+EXPORT_SYMBOL(global_cursor_default);
 #ifndef VT_SINGLE_DRIVER
 EXPORT_SYMBOL(take_over_console);
 EXPORT_SYMBOL(give_up_console);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index a9952b1..84c51e1 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -236,7 +236,7 @@
 	/* Padlock in ECB mode fetches at least ecb_fetch_bytes of data.
 	 * We could avoid some copying here but it's probably not worth it.
 	 */
-	if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) {
+	if (unlikely(((unsigned long)in & ~PAGE_MASK) + ecb_fetch_bytes > PAGE_SIZE)) {
 		ecb_crypt_copy(in, out, key, cword, count);
 		return;
 	}
@@ -248,7 +248,7 @@
 			    u8 *iv, struct cword *cword, int count)
 {
 	/* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */
-	if (unlikely(((unsigned long)in & PAGE_SIZE) + cbc_fetch_bytes > PAGE_SIZE))
+	if (unlikely(((unsigned long)in & ~PAGE_MASK) + cbc_fetch_bytes > PAGE_SIZE))
 		return cbc_crypt_copy(in, out, key, iv, cword, count);
 
 	return rep_xcrypt_cbc(in, out, key, iv, cword, count);
diff --git a/drivers/dio/dio-driver.c b/drivers/dio/dio-driver.c
index 9c0c9af..a7b174e 100644
--- a/drivers/dio/dio-driver.c
+++ b/drivers/dio/dio-driver.c
@@ -140,5 +140,4 @@
 EXPORT_SYMBOL(dio_match_device);
 EXPORT_SYMBOL(dio_register_driver);
 EXPORT_SYMBOL(dio_unregister_driver);
-EXPORT_SYMBOL(dio_dev_driver);
 EXPORT_SYMBOL(dio_bus_type);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5903a88..eb140ff 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -26,6 +26,8 @@
 	select DMA_ENGINE
 	select DCA
 	select ASYNC_TX_DISABLE_CHANNEL_SWITCH
+	select ASYNC_TX_DISABLE_PQ_VAL_DMA
+	select ASYNC_TX_DISABLE_XOR_VAL_DMA
 	help
 	  Enable support for the Intel(R) I/OAT DMA engine present
 	  in recent Intel Xeon chipsets.
@@ -52,7 +54,7 @@
 
 config AT_HDMAC
 	tristate "Atmel AHB DMA support"
-	depends on ARCH_AT91SAM9RL
+	depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 	select DMA_ENGINE
 	help
 	  Support the Atmel AHB DMA controller.  This can be integrated in
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index bd0b248..8f99354 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -632,11 +632,21 @@
 	#if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE)
 	if (!dma_has_cap(DMA_XOR, device->cap_mask))
 		return false;
+
+	#ifndef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA
+	if (!dma_has_cap(DMA_XOR_VAL, device->cap_mask))
+		return false;
+	#endif
 	#endif
 
 	#if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE)
 	if (!dma_has_cap(DMA_PQ, device->cap_mask))
 		return false;
+
+	#ifndef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA
+	if (!dma_has_cap(DMA_PQ_VAL, device->cap_mask))
+		return false;
+	#endif
 	#endif
 
 	return true;
diff --git a/drivers/dma/ioat/dca.c b/drivers/dma/ioat/dca.c
index 69d0261..abd9038 100644
--- a/drivers/dma/ioat/dca.c
+++ b/drivers/dma/ioat/dca.c
@@ -98,17 +98,17 @@
 	cpuid_level_9 = cpuid_eax(9);
 	res = test_bit(0, &cpuid_level_9);
 	if (!res)
-		dev_err(&pdev->dev, "DCA is disabled in BIOS\n");
+		dev_dbg(&pdev->dev, "DCA is disabled in BIOS\n");
 
 	return res;
 }
 
-static int system_has_dca_enabled(struct pci_dev *pdev)
+int system_has_dca_enabled(struct pci_dev *pdev)
 {
 	if (boot_cpu_has(X86_FEATURE_DCA))
 		return dca_enabled_in_bios(pdev);
 
-	dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n");
+	dev_dbg(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n");
 	return 0;
 }
 
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index c14fdfe..45edde9 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -297,9 +297,7 @@
 /* channel was fatally programmed */
 static inline bool is_ioat_bug(unsigned long err)
 {
-	return !!(err & (IOAT_CHANERR_SRC_ADDR_ERR|IOAT_CHANERR_DEST_ADDR_ERR|
-			 IOAT_CHANERR_NEXT_ADDR_ERR|IOAT_CHANERR_CONTROL_ERR|
-			 IOAT_CHANERR_LENGTH_ERR));
+	return !!err;
 }
 
 static inline void ioat_unmap(struct pci_dev *pdev, dma_addr_t addr, size_t len,
diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c
index 96ffab7..8f1f7f0 100644
--- a/drivers/dma/ioat/dma_v2.c
+++ b/drivers/dma/ioat/dma_v2.c
@@ -279,6 +279,8 @@
 			u32 chanerr;
 
 			chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+			dev_err(to_dev(chan), "%s: Channel halted (%x)\n",
+				__func__, chanerr);
 			BUG_ON(is_ioat_bug(chanerr));
 		}
 
diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c
index 35d1e33..42f6f10 100644
--- a/drivers/dma/ioat/dma_v3.c
+++ b/drivers/dma/ioat/dma_v3.c
@@ -378,6 +378,8 @@
 			u32 chanerr;
 
 			chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+			dev_err(to_dev(chan), "%s: Channel halted (%x)\n",
+				__func__, chanerr);
 			BUG_ON(is_ioat_bug(chanerr));
 		}
 
@@ -569,7 +571,7 @@
 	dump_desc_dbg(ioat, compl_desc);
 
 	/* we leave the channel locked to ensure in order submission */
-	return &desc->txd;
+	return &compl_desc->txd;
 }
 
 static struct dma_async_tx_descriptor *
@@ -728,7 +730,7 @@
 	dump_desc_dbg(ioat, compl_desc);
 
 	/* we leave the channel locked to ensure in order submission */
-	return &desc->txd;
+	return &compl_desc->txd;
 }
 
 static struct dma_async_tx_descriptor *
@@ -736,10 +738,16 @@
 	      unsigned int src_cnt, const unsigned char *scf, size_t len,
 	      unsigned long flags)
 {
+	/* specify valid address for disabled result */
+	if (flags & DMA_PREP_PQ_DISABLE_P)
+		dst[0] = dst[1];
+	if (flags & DMA_PREP_PQ_DISABLE_Q)
+		dst[1] = dst[0];
+
 	/* handle the single source multiply case from the raid6
 	 * recovery path
 	 */
-	if (unlikely((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1)) {
+	if ((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1) {
 		dma_addr_t single_source[2];
 		unsigned char single_source_coef[2];
 
@@ -761,6 +769,12 @@
 		  unsigned int src_cnt, const unsigned char *scf, size_t len,
 		  enum sum_check_flags *pqres, unsigned long flags)
 {
+	/* specify valid address for disabled result */
+	if (flags & DMA_PREP_PQ_DISABLE_P)
+		pq[0] = pq[1];
+	if (flags & DMA_PREP_PQ_DISABLE_Q)
+		pq[1] = pq[0];
+
 	/* the cleanup routine only sets bits on validate failure, it
 	 * does not clear bits on validate success... so clear it here
 	 */
@@ -778,9 +792,9 @@
 	dma_addr_t pq[2];
 
 	memset(scf, 0, src_cnt);
-	flags |= DMA_PREP_PQ_DISABLE_Q;
 	pq[0] = dst;
-	pq[1] = ~0;
+	flags |= DMA_PREP_PQ_DISABLE_Q;
+	pq[1] = dst; /* specify valid address for disabled result */
 
 	return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len,
 				    flags);
@@ -800,9 +814,9 @@
 	*result = 0;
 
 	memset(scf, 0, src_cnt);
-	flags |= DMA_PREP_PQ_DISABLE_Q;
 	pq[0] = src[0];
-	pq[1] = ~0;
+	flags |= DMA_PREP_PQ_DISABLE_Q;
+	pq[1] = pq[0]; /* specify valid address for disabled result */
 
 	return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf,
 				    len, flags);
@@ -1117,6 +1131,7 @@
 int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
 {
 	struct pci_dev *pdev = device->pdev;
+	int dca_en = system_has_dca_enabled(pdev);
 	struct dma_device *dma;
 	struct dma_chan *c;
 	struct ioat_chan_common *chan;
@@ -1137,6 +1152,11 @@
 	dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock;
 
 	cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET);
+
+	/* dca is incompatible with raid operations */
+	if (dca_en && (cap & (IOAT_CAP_XOR|IOAT_CAP_PQ)))
+		cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ);
+
 	if (cap & IOAT_CAP_XOR) {
 		is_raid_device = true;
 		dma->max_xor = 8;
@@ -1186,6 +1206,16 @@
 		device->timer_fn = ioat2_timer_event;
 	}
 
+	#ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA
+	dma_cap_clear(DMA_PQ_VAL, dma->cap_mask);
+	dma->device_prep_dma_pq_val = NULL;
+	#endif
+
+	#ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA
+	dma_cap_clear(DMA_XOR_VAL, dma->cap_mask);
+	dma->device_prep_dma_xor_val = NULL;
+	#endif
+
 	/* -= IOAT ver.3 workarounds =- */
 	/* Write CHANERRMSK_INT with 3E07h to mask out the errors
 	 * that can cause stability issues for IOAT ver.3
diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h
index 99afb12b..60e6754 100644
--- a/drivers/dma/ioat/hw.h
+++ b/drivers/dma/ioat/hw.h
@@ -39,6 +39,8 @@
 #define IOAT_VER_3_0            0x30    /* Version 3.0 */
 #define IOAT_VER_3_2            0x32    /* Version 3.2 */
 
+int system_has_dca_enabled(struct pci_dev *pdev);
+
 struct ioat_dma_descriptor {
 	uint32_t	size;
 	union {
diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h
index 63038e1..f015ec1 100644
--- a/drivers/dma/ioat/registers.h
+++ b/drivers/dma/ioat/registers.h
@@ -92,9 +92,7 @@
 #define IOAT_CHANCTRL_ERR_COMPLETION_EN		0x0004
 #define IOAT_CHANCTRL_INT_REARM			0x0001
 #define IOAT_CHANCTRL_RUN			(IOAT_CHANCTRL_INT_REARM |\
-						 IOAT_CHANCTRL_ERR_COMPLETION_EN |\
-						 IOAT_CHANCTRL_ANY_ERR_ABORT_EN |\
-						 IOAT_CHANCTRL_ERR_INT_EN)
+						 IOAT_CHANCTRL_ANY_ERR_ABORT_EN)
 
 #define IOAT_DMA_COMP_OFFSET			0x02	/* 16-bit DMA channel compatibility */
 #define IOAT_DMA_COMP_V1			0x0001	/* Compatibility with DMA version 1 */
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index b3b065c4..034ecf0 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -640,17 +640,16 @@
 #endif
 	struct sh_dmae_device *shdev;
 
+	/* get platform data */
+	if (!pdev->dev.platform_data)
+		return -ENODEV;
+
 	shdev = kzalloc(sizeof(struct sh_dmae_device), GFP_KERNEL);
 	if (!shdev) {
 		dev_err(&pdev->dev, "No enough memory\n");
-		err = -ENOMEM;
-		goto shdev_err;
+		return -ENOMEM;
 	}
 
-	/* get platform data */
-	if (!pdev->dev.platform_data)
-		goto shdev_err;
-
 	/* platform data */
 	memcpy(&shdev->pdata, pdev->dev.platform_data,
 			sizeof(struct sh_dmae_pdata));
@@ -722,7 +721,6 @@
 rst_err:
 	kfree(shdev);
 
-shdev_err:
 	return err;
 }
 
diff --git a/drivers/edac/edac_mce_amd.c b/drivers/edac/edac_mce_amd.c
index 713ed7d..689cc6a 100644
--- a/drivers/edac/edac_mce_amd.c
+++ b/drivers/edac/edac_mce_amd.c
@@ -3,7 +3,6 @@
 
 static bool report_gart_errors;
 static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
-static void (*orig_mce_callback)(struct mce *m);
 
 void amd_report_gart_errors(bool v)
 {
@@ -363,8 +362,10 @@
 		pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
 }
 
-static void amd_decode_mce(struct mce *m)
+static int amd_decode_mce(struct notifier_block *nb, unsigned long val,
+			   void *data)
 {
+	struct mce *m = (struct mce *)data;
 	struct err_regs regs;
 	int node, ecc;
 
@@ -420,20 +421,22 @@
 	}
 
 	amd_decode_err_code(m->status & 0xffff);
+
+	return NOTIFY_STOP;
 }
 
+static struct notifier_block amd_mce_dec_nb = {
+	.notifier_call	= amd_decode_mce,
+};
+
 static int __init mce_amd_init(void)
 {
 	/*
 	 * We can decode MCEs for Opteron and later CPUs:
 	 */
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
-	    (boot_cpu_data.x86 >= 0xf)) {
-		/* safe the default decode mce callback */
-		orig_mce_callback = x86_mce_decode_callback;
-
-		x86_mce_decode_callback = amd_decode_mce;
-	}
+	    (boot_cpu_data.x86 >= 0xf))
+		atomic_notifier_chain_register(&x86_mce_decoder_chain, &amd_mce_dec_nb);
 
 	return 0;
 }
@@ -442,7 +445,7 @@
 #ifdef MODULE
 static void __exit mce_amd_exit(void)
 {
-	x86_mce_decode_callback = orig_mce_callback;
+	atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &amd_mce_dec_nb);
 }
 
 MODULE_DESCRIPTION("AMD MCE decoder");
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c
index e4864e8..7083bcc 100644
--- a/drivers/firewire/core-card.c
+++ b/drivers/firewire/core-card.c
@@ -38,15 +38,14 @@
 
 #include "core.h"
 
-int fw_compute_block_crc(u32 *block)
+int fw_compute_block_crc(__be32 *block)
 {
-	__be32 be32_block[256];
-	int i, length;
+	int length;
+	u16 crc;
 
-	length = (*block >> 16) & 0xff;
-	for (i = 0; i < length; i++)
-		be32_block[i] = cpu_to_be32(block[i + 1]);
-	*block |= crc_itu_t(0, (u8 *) be32_block, length * 4);
+	length = (be32_to_cpu(block[0]) >> 16) & 0xff;
+	crc = crc_itu_t(0, (u8 *)&block[1], length * 4);
+	*block |= cpu_to_be32(crc);
 
 	return length;
 }
@@ -57,6 +56,8 @@
 static LIST_HEAD(descriptor_list);
 static int descriptor_count;
 
+static __be32 tmp_config_rom[256];
+
 #define BIB_CRC(v)		((v) <<  0)
 #define BIB_CRC_LENGTH(v)	((v) << 16)
 #define BIB_INFO_LENGTH(v)	((v) << 24)
@@ -72,11 +73,10 @@
 #define BIB_CMC			((1) << 30)
 #define BIB_IMC			((1) << 31)
 
-static u32 *generate_config_rom(struct fw_card *card, size_t *config_rom_length)
+static size_t generate_config_rom(struct fw_card *card, __be32 *config_rom)
 {
 	struct fw_descriptor *desc;
-	static u32 config_rom[256];
-	int i, j, length;
+	int i, j, k, length;
 
 	/*
 	 * Initialize contents of config rom buffer.  On the OHCI
@@ -87,40 +87,39 @@
 	 * the version stored in the OHCI registers.
 	 */
 
-	memset(config_rom, 0, sizeof(config_rom));
-	config_rom[0] = BIB_CRC_LENGTH(4) | BIB_INFO_LENGTH(4) | BIB_CRC(0);
-	config_rom[1] = 0x31333934;
-
-	config_rom[2] =
+	config_rom[0] = cpu_to_be32(
+		BIB_CRC_LENGTH(4) | BIB_INFO_LENGTH(4) | BIB_CRC(0));
+	config_rom[1] = cpu_to_be32(0x31333934);
+	config_rom[2] = cpu_to_be32(
 		BIB_LINK_SPEED(card->link_speed) |
 		BIB_GENERATION(card->config_rom_generation++ % 14 + 2) |
 		BIB_MAX_ROM(2) |
 		BIB_MAX_RECEIVE(card->max_receive) |
-		BIB_BMC | BIB_ISC | BIB_CMC | BIB_IMC;
-	config_rom[3] = card->guid >> 32;
-	config_rom[4] = card->guid;
+		BIB_BMC | BIB_ISC | BIB_CMC | BIB_IMC);
+	config_rom[3] = cpu_to_be32(card->guid >> 32);
+	config_rom[4] = cpu_to_be32(card->guid);
 
 	/* Generate root directory. */
-	i = 5;
-	config_rom[i++] = 0;
-	config_rom[i++] = 0x0c0083c0; /* node capabilities */
-	j = i + descriptor_count;
+	config_rom[6] = cpu_to_be32(0x0c0083c0); /* node capabilities */
+	i = 7;
+	j = 7 + descriptor_count;
 
 	/* Generate root directory entries for descriptors. */
 	list_for_each_entry (desc, &descriptor_list, link) {
 		if (desc->immediate > 0)
-			config_rom[i++] = desc->immediate;
-		config_rom[i] = desc->key | (j - i);
+			config_rom[i++] = cpu_to_be32(desc->immediate);
+		config_rom[i] = cpu_to_be32(desc->key | (j - i));
 		i++;
 		j += desc->length;
 	}
 
 	/* Update root directory length. */
-	config_rom[5] = (i - 5 - 1) << 16;
+	config_rom[5] = cpu_to_be32((i - 5 - 1) << 16);
 
 	/* End of root directory, now copy in descriptors. */
 	list_for_each_entry (desc, &descriptor_list, link) {
-		memcpy(&config_rom[i], desc->data, desc->length * 4);
+		for (k = 0; k < desc->length; k++)
+			config_rom[i + k] = cpu_to_be32(desc->data[k]);
 		i += desc->length;
 	}
 
@@ -131,20 +130,17 @@
 	for (i = 0; i < j; i += length + 1)
 		length = fw_compute_block_crc(config_rom + i);
 
-	*config_rom_length = j;
-
-	return config_rom;
+	return j;
 }
 
 static void update_config_roms(void)
 {
 	struct fw_card *card;
-	u32 *config_rom;
 	size_t length;
 
 	list_for_each_entry (card, &card_list, link) {
-		config_rom = generate_config_rom(card, &length);
-		card->driver->set_config_rom(card, config_rom, length);
+		length = generate_config_rom(card, tmp_config_rom);
+		card->driver->set_config_rom(card, tmp_config_rom, length);
 	}
 }
 
@@ -211,11 +207,8 @@
 
 void fw_schedule_bm_work(struct fw_card *card, unsigned long delay)
 {
-	int scheduled;
-
 	fw_card_get(card);
-	scheduled = schedule_delayed_work(&card->work, delay);
-	if (!scheduled)
+	if (!schedule_delayed_work(&card->work, delay))
 		fw_card_put(card);
 }
 
@@ -435,7 +428,6 @@
 int fw_card_add(struct fw_card *card,
 		u32 max_receive, u32 link_speed, u64 guid)
 {
-	u32 *config_rom;
 	size_t length;
 	int ret;
 
@@ -445,8 +437,8 @@
 
 	mutex_lock(&card_mutex);
 
-	config_rom = generate_config_rom(card, &length);
-	ret = card->driver->enable(card, config_rom, length);
+	length = generate_config_rom(card, tmp_config_rom);
+	ret = card->driver->enable(card, tmp_config_rom, length);
 	if (ret == 0)
 		list_add_tail(&card->link, &card_list);
 
@@ -465,7 +457,8 @@
  * shutdown still need to be provided by the card driver.
  */
 
-static int dummy_enable(struct fw_card *card, u32 *config_rom, size_t length)
+static int dummy_enable(struct fw_card *card,
+			const __be32 *config_rom, size_t length)
 {
 	BUG();
 	return -1;
@@ -478,7 +471,7 @@
 }
 
 static int dummy_set_config_rom(struct fw_card *card,
-				u32 *config_rom, size_t length)
+				const __be32 *config_rom, size_t length)
 {
 	/*
 	 * We take the card out of card_list before setting the dummy
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index 5089331..231e6ee 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -130,9 +130,22 @@
 	struct iso_resource_event *e_alloc, *e_dealloc;
 };
 
-static void schedule_iso_resource(struct iso_resource *);
 static void release_iso_resource(struct client *, struct client_resource *);
 
+static void schedule_iso_resource(struct iso_resource *r, unsigned long delay)
+{
+	client_get(r->client);
+	if (!schedule_delayed_work(&r->work, delay))
+		client_put(r->client);
+}
+
+static void schedule_if_iso_resource(struct client_resource *resource)
+{
+	if (resource->release == release_iso_resource)
+		schedule_iso_resource(container_of(resource,
+					struct iso_resource, resource), 0);
+}
+
 /*
  * dequeue_event() just kfree()'s the event, so the event has to be
  * the first field in a struct XYZ_event.
@@ -166,7 +179,7 @@
 
 struct iso_resource_event {
 	struct event event;
-	struct fw_cdev_event_iso_resource resource;
+	struct fw_cdev_event_iso_resource iso_resource;
 };
 
 static inline void __user *u64_to_uptr(__u64 value)
@@ -314,11 +327,8 @@
 
 static int schedule_reallocations(int id, void *p, void *data)
 {
-	struct client_resource *r = p;
+	schedule_if_iso_resource(p);
 
-	if (r->release == release_iso_resource)
-		schedule_iso_resource(container_of(r,
-					struct iso_resource, resource));
 	return 0;
 }
 
@@ -414,9 +424,7 @@
 				  &resource->handle);
 	if (ret >= 0) {
 		client_get(client);
-		if (resource->release == release_iso_resource)
-			schedule_iso_resource(container_of(resource,
-						struct iso_resource, resource));
+		schedule_if_iso_resource(resource);
 	}
 	spin_unlock_irqrestore(&client->lock, flags);
 
@@ -428,26 +436,26 @@
 
 static int release_client_resource(struct client *client, u32 handle,
 				   client_resource_release_fn_t release,
-				   struct client_resource **resource)
+				   struct client_resource **return_resource)
 {
-	struct client_resource *r;
+	struct client_resource *resource;
 
 	spin_lock_irq(&client->lock);
 	if (client->in_shutdown)
-		r = NULL;
+		resource = NULL;
 	else
-		r = idr_find(&client->resource_idr, handle);
-	if (r && r->release == release)
+		resource = idr_find(&client->resource_idr, handle);
+	if (resource && resource->release == release)
 		idr_remove(&client->resource_idr, handle);
 	spin_unlock_irq(&client->lock);
 
-	if (!(r && r->release == release))
+	if (!(resource && resource->release == release))
 		return -EINVAL;
 
-	if (resource)
-		*resource = r;
+	if (return_resource)
+		*return_resource = resource;
 	else
-		r->release(client, r);
+		resource->release(client, resource);
 
 	client_put(client);
 
@@ -699,6 +707,7 @@
 	struct fw_cdev_send_response *request = buffer;
 	struct client_resource *resource;
 	struct inbound_transaction_resource *r;
+	int ret = 0;
 
 	if (release_client_resource(client, request->handle,
 				    release_request, &resource) < 0)
@@ -708,13 +717,17 @@
 			 resource);
 	if (request->length < r->length)
 		r->length = request->length;
-	if (copy_from_user(r->data, u64_to_uptr(request->data), r->length))
-		return -EFAULT;
+
+	if (copy_from_user(r->data, u64_to_uptr(request->data), r->length)) {
+		ret = -EFAULT;
+		goto out;
+	}
 
 	fw_send_response(client->device->card, r->request, request->rcode);
+ out:
 	kfree(r);
 
-	return 0;
+	return ret;
 }
 
 static int ioctl_initiate_bus_reset(struct client *client, void *buffer)
@@ -1028,8 +1041,7 @@
 	/* Allow 1000ms grace period for other reallocations. */
 	if (todo == ISO_RES_ALLOC &&
 	    time_is_after_jiffies(client->device->card->reset_jiffies + HZ)) {
-		if (schedule_delayed_work(&r->work, DIV_ROUND_UP(HZ, 3)))
-			client_get(client);
+		schedule_iso_resource(r, DIV_ROUND_UP(HZ, 3));
 		skip = true;
 	} else {
 		/* We could be called twice within the same generation. */
@@ -1097,12 +1109,12 @@
 		e = r->e_dealloc;
 		r->e_dealloc = NULL;
 	}
-	e->resource.handle	= r->resource.handle;
-	e->resource.channel	= channel;
-	e->resource.bandwidth	= bandwidth;
+	e->iso_resource.handle    = r->resource.handle;
+	e->iso_resource.channel   = channel;
+	e->iso_resource.bandwidth = bandwidth;
 
 	queue_event(client, &e->event,
-		    &e->resource, sizeof(e->resource), NULL, 0);
+		    &e->iso_resource, sizeof(e->iso_resource), NULL, 0);
 
 	if (free) {
 		cancel_delayed_work(&r->work);
@@ -1114,13 +1126,6 @@
 	client_put(client);
 }
 
-static void schedule_iso_resource(struct iso_resource *r)
-{
-	client_get(r->client);
-	if (!schedule_delayed_work(&r->work, 0))
-		client_put(r->client);
-}
-
 static void release_iso_resource(struct client *client,
 				 struct client_resource *resource)
 {
@@ -1129,7 +1134,7 @@
 
 	spin_lock_irq(&client->lock);
 	r->todo = ISO_RES_DEALLOC;
-	schedule_iso_resource(r);
+	schedule_iso_resource(r, 0);
 	spin_unlock_irq(&client->lock);
 }
 
@@ -1162,10 +1167,10 @@
 	r->e_alloc	= e1;
 	r->e_dealloc	= e2;
 
-	e1->resource.closure	= request->closure;
-	e1->resource.type	= FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED;
-	e2->resource.closure	= request->closure;
-	e2->resource.type	= FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED;
+	e1->iso_resource.closure = request->closure;
+	e1->iso_resource.type    = FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED;
+	e2->iso_resource.closure = request->closure;
+	e2->iso_resource.type    = FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED;
 
 	if (todo == ISO_RES_ALLOC) {
 		r->resource.release = release_iso_resource;
@@ -1175,7 +1180,7 @@
 	} else {
 		r->resource.release = NULL;
 		r->resource.handle = -1;
-		schedule_iso_resource(r);
+		schedule_iso_resource(r, 0);
 	}
 	request->handle = r->resource.handle;
 
@@ -1295,7 +1300,23 @@
 static int dispatch_ioctl(struct client *client,
 			  unsigned int cmd, void __user *arg)
 {
-	char buffer[256];
+	char buffer[sizeof(union {
+		struct fw_cdev_get_info			_00;
+		struct fw_cdev_send_request		_01;
+		struct fw_cdev_allocate			_02;
+		struct fw_cdev_deallocate		_03;
+		struct fw_cdev_send_response		_04;
+		struct fw_cdev_initiate_bus_reset	_05;
+		struct fw_cdev_add_descriptor		_06;
+		struct fw_cdev_remove_descriptor	_07;
+		struct fw_cdev_create_iso_context	_08;
+		struct fw_cdev_queue_iso		_09;
+		struct fw_cdev_start_iso		_0a;
+		struct fw_cdev_stop_iso			_0b;
+		struct fw_cdev_get_cycle_timer		_0c;
+		struct fw_cdev_allocate_iso_resource	_0d;
+		struct fw_cdev_send_stream_packet	_13;
+	})];
 	int ret;
 
 	if (_IOC_TYPE(cmd) != '#' ||
@@ -1390,10 +1411,10 @@
 
 static int shutdown_resource(int id, void *p, void *data)
 {
-	struct client_resource *r = p;
+	struct client_resource *resource = p;
 	struct client *client = data;
 
-	r->release(client, r);
+	resource->release(client, resource);
 	client_put(client);
 
 	return 0;
@@ -1402,7 +1423,7 @@
 static int fw_device_op_release(struct inode *inode, struct file *file)
 {
 	struct client *client = file->private_data;
-	struct event *e, *next_e;
+	struct event *event, *next_event;
 
 	mutex_lock(&client->device->client_list_mutex);
 	list_del(&client->link);
@@ -1423,8 +1444,8 @@
 	idr_remove_all(&client->resource_idr);
 	idr_destroy(&client->resource_idr);
 
-	list_for_each_entry_safe(e, next_e, &client->event_list, link)
-		kfree(e);
+	list_for_each_entry_safe(event, next_event, &client->event_list, link)
+		kfree(event);
 
 	client_put(client);
 
diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c
index fddf2b3..9a5f38c 100644
--- a/drivers/firewire/core-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -28,9 +28,9 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/string.h>
 
 #include <asm/atomic.h>
+#include <asm/byteorder.h>
 #include <asm/system.h>
 
 #include "core.h"
@@ -510,13 +510,16 @@
 static void update_topology_map(struct fw_card *card,
 				u32 *self_ids, int self_id_count)
 {
-	int node_count;
+	int node_count = (card->root_node->node_id & 0x3f) + 1;
+	__be32 *map = card->topology_map;
 
-	card->topology_map[1]++;
-	node_count = (card->root_node->node_id & 0x3f) + 1;
-	card->topology_map[2] = (node_count << 16) | self_id_count;
-	card->topology_map[0] = (self_id_count + 2) << 16;
-	memcpy(&card->topology_map[3], self_ids, self_id_count * 4);
+	*map++ = cpu_to_be32((self_id_count + 2) << 16);
+	*map++ = cpu_to_be32(be32_to_cpu(card->topology_map[1]) + 1);
+	*map++ = cpu_to_be32((node_count << 16) | self_id_count);
+
+	while (self_id_count--)
+		*map++ = cpu_to_be32p(self_ids++);
+
 	fw_compute_block_crc(card->topology_map);
 }
 
diff --git a/drivers/firewire/core-transaction.c b/drivers/firewire/core-transaction.c
index da628c7..842739d 100644
--- a/drivers/firewire/core-transaction.c
+++ b/drivers/firewire/core-transaction.c
@@ -218,12 +218,15 @@
 		packet->header_length = 16;
 		packet->payload_length = 0;
 		break;
+
+	default:
+		WARN(1, KERN_ERR "wrong tcode %d", tcode);
 	}
  common:
 	packet->speed = speed;
 	packet->generation = generation;
 	packet->ack = 0;
-	packet->payload_bus = 0;
+	packet->payload_mapped = false;
 }
 
 /**
@@ -595,11 +598,10 @@
 		break;
 
 	default:
-		BUG();
-		return;
+		WARN(1, KERN_ERR "wrong tcode %d", tcode);
 	}
 
-	response->payload_bus = 0;
+	response->payload_mapped = false;
 }
 EXPORT_SYMBOL(fw_fill_response);
 
@@ -810,8 +812,7 @@
 		int speed, unsigned long long offset,
 		void *payload, size_t length, void *callback_data)
 {
-	int i, start, end;
-	__be32 *map;
+	int start;
 
 	if (!TCODE_IS_READ_REQUEST(tcode)) {
 		fw_send_response(card, request, RCODE_TYPE_ERROR);
@@ -824,11 +825,7 @@
 	}
 
 	start = (offset - topology_map_region.start) / 4;
-	end = start + length / 4;
-	map = payload;
-
-	for (i = 0; i < length / 4; i++)
-		map[i] = cpu_to_be32(card->topology_map[start + i]);
+	memcpy(payload, &card->topology_map[start], length);
 
 	fw_send_response(card, request, RCODE_COMPLETE);
 }
diff --git a/drivers/firewire/core.h b/drivers/firewire/core.h
index 7ff6e75..ed3b1a7 100644
--- a/drivers/firewire/core.h
+++ b/drivers/firewire/core.h
@@ -40,7 +40,8 @@
 	 * enable the PHY or set the link_on bit and initiate a bus
 	 * reset.
 	 */
-	int (*enable)(struct fw_card *card, u32 *config_rom, size_t length);
+	int (*enable)(struct fw_card *card,
+		      const __be32 *config_rom, size_t length);
 
 	int (*update_phy_reg)(struct fw_card *card, int address,
 			      int clear_bits, int set_bits);
@@ -48,10 +49,10 @@
 	/*
 	 * Update the config rom for an enabled card.  This function
 	 * should change the config rom that is presented on the bus
-	 * an initiate a bus reset.
+	 * and initiate a bus reset.
 	 */
 	int (*set_config_rom)(struct fw_card *card,
-			      u32 *config_rom, size_t length);
+			      const __be32 *config_rom, size_t length);
 
 	void (*send_request)(struct fw_card *card, struct fw_packet *packet);
 	void (*send_response)(struct fw_card *card, struct fw_packet *packet);
@@ -93,7 +94,7 @@
 		u32 max_receive, u32 link_speed, u64 guid);
 void fw_core_remove_card(struct fw_card *card);
 int fw_core_initiate_bus_reset(struct fw_card *card, int short_reset);
-int fw_compute_block_crc(u32 *block);
+int fw_compute_block_crc(__be32 *block);
 void fw_schedule_bm_work(struct fw_card *card, unsigned long delay);
 
 static inline struct fw_card *fw_card_get(struct fw_card *card)
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 5d52425..ae4556f 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -205,7 +205,7 @@
 	dma_addr_t config_rom_bus;
 	__be32 *next_config_rom;
 	dma_addr_t next_config_rom_bus;
-	u32 next_header;
+	__be32 next_header;
 
 	struct ar_context ar_request_ctx;
 	struct ar_context ar_response_ctx;
@@ -275,7 +275,7 @@
 	    !(evt & OHCI1394_busReset))
 		return;
 
-	fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+	fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
 	    evt & OHCI1394_selfIDComplete	? " selfID"		: "",
 	    evt & OHCI1394_RQPkt		? " AR_req"		: "",
 	    evt & OHCI1394_RSPkt		? " AR_resp"		: "",
@@ -286,6 +286,7 @@
 	    evt & OHCI1394_postedWriteErr	? " postedWriteErr"	: "",
 	    evt & OHCI1394_cycleTooLong		? " cycleTooLong"	: "",
 	    evt & OHCI1394_cycle64Seconds	? " cycle64Seconds"	: "",
+	    evt & OHCI1394_cycleInconsistent	? " cycleInconsistent"	: "",
 	    evt & OHCI1394_regAccessFail	? " regAccessFail"	: "",
 	    evt & OHCI1394_busReset		? " busReset"		: "",
 	    evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
@@ -293,6 +294,7 @@
 		    OHCI1394_respTxComplete | OHCI1394_isochRx |
 		    OHCI1394_isochTx | OHCI1394_postedWriteErr |
 		    OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+		    OHCI1394_cycleInconsistent |
 		    OHCI1394_regAccessFail | OHCI1394_busReset)
 						? " ?"			: "");
 }
@@ -995,7 +997,8 @@
 			packet->ack = RCODE_SEND_ERROR;
 			return -1;
 		}
-		packet->payload_bus = payload_bus;
+		packet->payload_bus	= payload_bus;
+		packet->payload_mapped	= true;
 
 		d[2].req_count    = cpu_to_le16(packet->payload_length);
 		d[2].data_address = cpu_to_le32(payload_bus);
@@ -1023,7 +1026,7 @@
 	 */
 	if (ohci->generation != packet->generation ||
 	    reg_read(ohci, OHCI1394_IntEventSet) & OHCI1394_busReset) {
-		if (packet->payload_length > 0)
+		if (packet->payload_mapped)
 			dma_unmap_single(ohci->card.device, payload_bus,
 					 packet->payload_length, DMA_TO_DEVICE);
 		packet->ack = RCODE_GENERATION;
@@ -1059,7 +1062,7 @@
 		/* This packet was cancelled, just continue. */
 		return 1;
 
-	if (packet->payload_bus)
+	if (packet->payload_mapped)
 		dma_unmap_single(ohci->card.device, packet->payload_bus,
 				 packet->payload_length, DMA_TO_DEVICE);
 
@@ -1355,8 +1358,9 @@
 		 */
 		reg_write(ohci, OHCI1394_BusOptions,
 			  be32_to_cpu(ohci->config_rom[2]));
-		ohci->config_rom[0] = cpu_to_be32(ohci->next_header);
-		reg_write(ohci, OHCI1394_ConfigROMhdr, ohci->next_header);
+		ohci->config_rom[0] = ohci->next_header;
+		reg_write(ohci, OHCI1394_ConfigROMhdr,
+			  be32_to_cpu(ohci->next_header));
 	}
 
 #ifdef CONFIG_FIREWIRE_OHCI_REMOTE_DMA
@@ -1439,6 +1443,17 @@
 			  OHCI1394_LinkControl_cycleMaster);
 	}
 
+	if (unlikely(event & OHCI1394_cycleInconsistent)) {
+		/*
+		 * We need to clear this event bit in order to make
+		 * cycleMatch isochronous I/O work.  In theory we should
+		 * stop active cycleMatch iso contexts now and restart
+		 * them at least two cycles later.  (FIXME?)
+		 */
+		if (printk_ratelimit())
+			fw_notify("isochronous cycle inconsistent\n");
+	}
+
 	if (event & OHCI1394_cycle64Seconds) {
 		cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer);
 		if ((cycle_time & 0x80000000) == 0)
@@ -1464,7 +1479,17 @@
 	return -EBUSY;
 }
 
-static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
+static void copy_config_rom(__be32 *dest, const __be32 *src, size_t length)
+{
+	size_t size = length * 4;
+
+	memcpy(dest, src, size);
+	if (size < CONFIG_ROM_SIZE)
+		memset(&dest[length], 0, CONFIG_ROM_SIZE - size);
+}
+
+static int ohci_enable(struct fw_card *card,
+		       const __be32 *config_rom, size_t length)
 {
 	struct fw_ohci *ohci = fw_ohci(card);
 	struct pci_dev *dev = to_pci_dev(card->device);
@@ -1528,6 +1553,7 @@
 		  OHCI1394_reqTxComplete | OHCI1394_respTxComplete |
 		  OHCI1394_isochRx | OHCI1394_isochTx |
 		  OHCI1394_postedWriteErr | OHCI1394_cycleTooLong |
+		  OHCI1394_cycleInconsistent |
 		  OHCI1394_cycle64Seconds | OHCI1394_regAccessFail |
 		  OHCI1394_masterIntEnable);
 	if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS)
@@ -1565,8 +1591,7 @@
 		if (ohci->next_config_rom == NULL)
 			return -ENOMEM;
 
-		memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
-		fw_memcpy_to_be32(ohci->next_config_rom, config_rom, length * 4);
+		copy_config_rom(ohci->next_config_rom, config_rom, length);
 	} else {
 		/*
 		 * In the suspend case, config_rom is NULL, which
@@ -1576,7 +1601,7 @@
 		ohci->next_config_rom_bus = ohci->config_rom_bus;
 	}
 
-	ohci->next_header = be32_to_cpu(ohci->next_config_rom[0]);
+	ohci->next_header = ohci->next_config_rom[0];
 	ohci->next_config_rom[0] = 0;
 	reg_write(ohci, OHCI1394_ConfigROMhdr, 0);
 	reg_write(ohci, OHCI1394_BusOptions,
@@ -1610,7 +1635,7 @@
 }
 
 static int ohci_set_config_rom(struct fw_card *card,
-			       u32 *config_rom, size_t length)
+			       const __be32 *config_rom, size_t length)
 {
 	struct fw_ohci *ohci;
 	unsigned long flags;
@@ -1659,9 +1684,7 @@
 		ohci->next_config_rom = next_config_rom;
 		ohci->next_config_rom_bus = next_config_rom_bus;
 
-		memset(ohci->next_config_rom, 0, CONFIG_ROM_SIZE);
-		fw_memcpy_to_be32(ohci->next_config_rom, config_rom,
-				  length * 4);
+		copy_config_rom(ohci->next_config_rom, config_rom, length);
 
 		ohci->next_header = config_rom[0];
 		ohci->next_config_rom[0] = 0;
@@ -1715,7 +1738,7 @@
 	if (packet->ack != 0)
 		goto out;
 
-	if (packet->payload_bus)
+	if (packet->payload_mapped)
 		dma_unmap_single(ohci->card.device, packet->payload_bus,
 				 packet->payload_length, DMA_TO_DEVICE);
 
@@ -1890,15 +1913,30 @@
 {
 	struct iso_context *ctx =
 		container_of(context, struct iso_context, context);
+	int i;
+	struct descriptor *pd;
 
-	if (last->transfer_status == 0)
-		/* This descriptor isn't done yet, stop iteration. */
+	for (pd = d; pd <= last; pd++)
+		if (pd->transfer_status)
+			break;
+	if (pd > last)
+		/* Descriptor(s) not done yet, stop iteration */
 		return 0;
 
-	if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS)
+	i = ctx->header_length;
+	if (i + 4 < PAGE_SIZE) {
+		/* Present this value as big-endian to match the receive code */
+		*(__be32 *)(ctx->header + i) = cpu_to_be32(
+				((u32)le16_to_cpu(pd->transfer_status) << 16) |
+				le16_to_cpu(pd->res_count));
+		ctx->header_length += 4;
+	}
+	if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) {
 		ctx->base.callback(&ctx->base, le16_to_cpu(last->res_count),
-				   0, NULL, ctx->base.callback_data);
-
+				   ctx->header_length, ctx->header,
+				   ctx->base.callback_data);
+		ctx->header_length = 0;
+	}
 	return 1;
 }
 
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index 98dbbda..d485cdd 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -820,20 +820,25 @@
 	fw_device_put(device);
 }
 
-static struct workqueue_struct *sbp2_wq;
+static void sbp2_target_get(struct sbp2_target *tgt)
+{
+	kref_get(&tgt->kref);
+}
 
 static void sbp2_target_put(struct sbp2_target *tgt)
 {
 	kref_put(&tgt->kref, sbp2_release_target);
 }
 
+static struct workqueue_struct *sbp2_wq;
+
 /*
  * Always get the target's kref when scheduling work on one its units.
  * Each workqueue job is responsible to call sbp2_target_put() upon return.
  */
 static void sbp2_queue_work(struct sbp2_logical_unit *lu, unsigned long delay)
 {
-	kref_get(&lu->tgt->kref);
+	sbp2_target_get(lu->tgt);
 	if (!queue_delayed_work(sbp2_wq, &lu->work, delay))
 		sbp2_target_put(lu->tgt);
 }
diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c
index 5711ce5..4baf3d7 100644
--- a/drivers/gpio/langwell_gpio.c
+++ b/drivers/gpio/langwell_gpio.c
@@ -144,13 +144,6 @@
 
 static void lnw_irq_unmask(unsigned irq)
 {
-	struct lnw_gpio *lnw = get_irq_chip_data(irq);
-	u32 gpio = irq - lnw->irq_base;
-	u8 reg = gpio / 32;
-	void __iomem *gedr;
-
-	gedr = (void __iomem *)(&lnw->reg_base->GEDR[reg]);
-	writel(BIT(gpio % 32), gedr);
 };
 
 static void lnw_irq_mask(unsigned irq)
@@ -183,13 +176,11 @@
 		gedr_v = readl(gedr);
 		if (!gedr_v)
 			continue;
-		for (gpio = reg*32; gpio < reg*32+32; gpio++) {
-			gedr_v = readl(gedr);
+		for (gpio = reg*32; gpio < reg*32+32; gpio++)
 			if (gedr_v & BIT(gpio % 32)) {
 				pr_debug("pin %d triggered\n", gpio);
 				generic_handle_irq(lnw->irq_base + gpio);
 			}
-		}
 		/* clear the edge detect status bit */
 		writel(gedr_v, gedr);
 	}
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index f831ea1..96eddd1 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -92,6 +92,7 @@
 config DRM_I915
 	tristate "i915 driver"
 	depends on AGP_INTEL
+	select SHMEM
 	select DRM_KMS_HELPER
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index cea665d..b54ba63 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -662,6 +662,12 @@
 		return NULL;
 	}
 
+	/* Some EDIDs have bogus h/vtotal values */
+	if (mode->hsync_end > mode->htotal)
+		mode->htotal = mode->hsync_end + 1;
+	if (mode->vsync_end > mode->vtotal)
+		mode->vtotal = mode->vsync_end + 1;
+
 	drm_mode_set_name(mode);
 
 	if (pt->misc & DRM_EDID_PT_INTERLACED)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index dc8e374..65ef011 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -599,7 +599,7 @@
 	struct drm_framebuffer *fb = fb_helper->fb;
 	int depth;
 
-	if (var->pixclock == -1 || !var->pixclock)
+	if (var->pixclock != 0)
 		return -EINVAL;
 
 	/* Need to resize the fb object !!! */
@@ -691,7 +691,7 @@
 	int ret;
 	int i;
 
-	if (var->pixclock != -1) {
+	if (var->pixclock != 0) {
 		DRM_ERROR("PIXEL CLCOK SET\n");
 		return -EINVAL;
 	}
@@ -904,7 +904,7 @@
 	fb_helper->fb = fb;
 
 	if (new_fb) {
-		info->var.pixclock = -1;
+		info->var.pixclock = 0;
 		if (register_framebuffer(info) < 0)
 			return -EINVAL;
 	} else {
diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 8039199..e9dbb48 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -552,7 +552,7 @@
 	vma->vm_flags |= VM_RESERVED | VM_IO | VM_PFNMAP | VM_DONTEXPAND;
 	vma->vm_ops = obj->dev->driver->gem_vm_ops;
 	vma->vm_private_data = map->handle;
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	vma->vm_page_prot =  pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
 
 	/* Take a ref for this mapping of the object, so that the fault
 	 * handler can dereference the mmap offset's pointer to the object.
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index c861d80..97dc5a4 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -103,6 +103,11 @@
 	return child;
 }
 
+/* drm_mm_pre_get() - pre allocate drm_mm_node structure
+ * drm_mm:	memory manager struct we are pre-allocating for
+ *
+ * Returns 0 on success or -ENOMEM if allocation fails.
+ */
 int drm_mm_pre_get(struct drm_mm *mm)
 {
 	struct drm_mm_node *node;
@@ -253,12 +258,14 @@
 				prev_node->size += next_node->size;
 				list_del(&next_node->ml_entry);
 				list_del(&next_node->fl_entry);
+				spin_lock(&mm->unused_lock);
 				if (mm->num_unused < MM_UNUSED_TARGET) {
 					list_add(&next_node->fl_entry,
 						 &mm->unused_nodes);
 					++mm->num_unused;
 				} else
 					kfree(next_node);
+				spin_unlock(&mm->unused_lock);
 			} else {
 				next_node->size += cur->size;
 				next_node->start = cur->start;
@@ -271,11 +278,13 @@
 		list_add(&cur->fl_entry, &mm->fl_entry);
 	} else {
 		list_del(&cur->ml_entry);
+		spin_lock(&mm->unused_lock);
 		if (mm->num_unused < MM_UNUSED_TARGET) {
 			list_add(&cur->fl_entry, &mm->unused_nodes);
 			++mm->num_unused;
 		} else
 			kfree(cur);
+		spin_unlock(&mm->unused_lock);
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index f8ce9a3..26bf055 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -267,10 +267,10 @@
 	uint32_t *mem;
 
 	for (page = 0; page < page_count; page++) {
-		mem = kmap(pages[page]);
+		mem = kmap_atomic(pages[page], KM_USER0);
 		for (i = 0; i < PAGE_SIZE; i += 4)
 			seq_printf(m, "%08x :  %08x\n", i, mem[i / 4]);
-		kunmap(pages[page]);
+		kunmap_atomic(pages[page], KM_USER0);
 	}
 }
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 57204e2..a725f659 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -296,6 +296,7 @@
 	u32 saveVBLANK_A;
 	u32 saveVSYNC_A;
 	u32 saveBCLRPAT_A;
+	u32 saveTRANSACONF;
 	u32 saveTRANS_HTOTAL_A;
 	u32 saveTRANS_HBLANK_A;
 	u32 saveTRANS_HSYNC_A;
@@ -326,6 +327,7 @@
 	u32 saveVBLANK_B;
 	u32 saveVSYNC_B;
 	u32 saveBCLRPAT_B;
+	u32 saveTRANSBCONF;
 	u32 saveTRANS_HTOTAL_B;
 	u32 saveTRANS_HBLANK_B;
 	u32 saveTRANS_HSYNC_B;
@@ -414,6 +416,16 @@
 	u32 savePFB_WIN_SZ;
 	u32 savePFA_WIN_POS;
 	u32 savePFB_WIN_POS;
+	u32 savePCH_DREF_CONTROL;
+	u32 saveDISP_ARB_CTL;
+	u32 savePIPEA_DATA_M1;
+	u32 savePIPEA_DATA_N1;
+	u32 savePIPEA_LINK_M1;
+	u32 savePIPEA_LINK_N1;
+	u32 savePIPEB_DATA_M1;
+	u32 savePIPEB_DATA_N1;
+	u32 savePIPEB_LINK_M1;
+	u32 savePIPEB_LINK_N1;
 
 	struct {
 		struct drm_mm gtt_space;
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index c3ceffa..aa7fd82 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -254,10 +254,15 @@
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	int ret = IRQ_NONE;
-	u32 de_iir, gt_iir;
+	u32 de_iir, gt_iir, de_ier;
 	u32 new_de_iir, new_gt_iir;
 	struct drm_i915_master_private *master_priv;
 
+	/* disable master interrupt before clearing iir  */
+	de_ier = I915_READ(DEIER);
+	I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL);
+	(void)I915_READ(DEIER);
+
 	de_iir = I915_READ(DEIIR);
 	gt_iir = I915_READ(GTIIR);
 
@@ -290,6 +295,9 @@
 		gt_iir = new_gt_iir;
 	}
 
+	I915_WRITE(DEIER, de_ier);
+	(void)I915_READ(DEIER);
+
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 992d561..6eec8171 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -239,6 +239,11 @@
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		return;
 
+	if (IS_IGDNG(dev)) {
+		dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL);
+		dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL);
+	}
+
 	/* Pipe & plane A info */
 	dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
 	dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
@@ -263,6 +268,11 @@
 		dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
 
 	if (IS_IGDNG(dev)) {
+		dev_priv->savePIPEA_DATA_M1 = I915_READ(PIPEA_DATA_M1);
+		dev_priv->savePIPEA_DATA_N1 = I915_READ(PIPEA_DATA_N1);
+		dev_priv->savePIPEA_LINK_M1 = I915_READ(PIPEA_LINK_M1);
+		dev_priv->savePIPEA_LINK_N1 = I915_READ(PIPEA_LINK_N1);
+
 		dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL);
 		dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL);
 
@@ -270,6 +280,7 @@
 		dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ);
 		dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS);
 
+		dev_priv->saveTRANSACONF = I915_READ(TRANSACONF);
 		dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A);
 		dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A);
 		dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A);
@@ -314,6 +325,11 @@
 		dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B);
 
 	if (IS_IGDNG(dev)) {
+		dev_priv->savePIPEB_DATA_M1 = I915_READ(PIPEB_DATA_M1);
+		dev_priv->savePIPEB_DATA_N1 = I915_READ(PIPEB_DATA_N1);
+		dev_priv->savePIPEB_LINK_M1 = I915_READ(PIPEB_LINK_M1);
+		dev_priv->savePIPEB_LINK_N1 = I915_READ(PIPEB_LINK_N1);
+
 		dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL);
 		dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL);
 
@@ -321,6 +337,7 @@
 		dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ);
 		dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS);
 
+		dev_priv->saveTRANSBCONF = I915_READ(TRANSBCONF);
 		dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B);
 		dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B);
 		dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B);
@@ -368,6 +385,11 @@
 		fpb1_reg = FPB1;
 	}
 
+	if (IS_IGDNG(dev)) {
+		I915_WRITE(PCH_DREF_CONTROL, dev_priv->savePCH_DREF_CONTROL);
+		I915_WRITE(DISP_ARB_CTL, dev_priv->saveDISP_ARB_CTL);
+	}
+
 	/* Pipe & plane A info */
 	/* Prime the clock */
 	if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -395,6 +417,11 @@
 		I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
 
 	if (IS_IGDNG(dev)) {
+		I915_WRITE(PIPEA_DATA_M1, dev_priv->savePIPEA_DATA_M1);
+		I915_WRITE(PIPEA_DATA_N1, dev_priv->savePIPEA_DATA_N1);
+		I915_WRITE(PIPEA_LINK_M1, dev_priv->savePIPEA_LINK_M1);
+		I915_WRITE(PIPEA_LINK_N1, dev_priv->savePIPEA_LINK_N1);
+
 		I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL);
 		I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL);
 
@@ -402,6 +429,7 @@
 		I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ);
 		I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS);
 
+		I915_WRITE(TRANSACONF, dev_priv->saveTRANSACONF);
 		I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A);
 		I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A);
 		I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A);
@@ -439,7 +467,7 @@
 	/* Actually enable it */
 	I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B);
 	DRM_UDELAY(150);
-	if (IS_I965G(dev))
+	if (IS_I965G(dev) && !IS_IGDNG(dev))
 		I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
 	DRM_UDELAY(150);
 
@@ -454,6 +482,11 @@
 		I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
 
 	if (IS_IGDNG(dev)) {
+		I915_WRITE(PIPEB_DATA_M1, dev_priv->savePIPEB_DATA_M1);
+		I915_WRITE(PIPEB_DATA_N1, dev_priv->savePIPEB_DATA_N1);
+		I915_WRITE(PIPEB_LINK_M1, dev_priv->savePIPEB_LINK_M1);
+		I915_WRITE(PIPEB_LINK_N1, dev_priv->savePIPEB_LINK_N1);
+
 		I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL);
 		I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL);
 
@@ -461,6 +494,7 @@
 		I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ);
 		I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS);
 
+		I915_WRITE(TRANSBCONF, dev_priv->saveTRANSBCONF);
 		I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B);
 		I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B);
 		I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B);
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 212e227..e505144 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -262,8 +262,8 @@
 		} while (time_after(timeout, jiffies));
 	}
 
-	if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) ==
-	    CRT_HOTPLUG_MONITOR_COLOR)
+	if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
+	    CRT_HOTPLUG_MONITOR_NONE)
 		return true;
 
 	return false;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3ba6546b..099f420 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -863,10 +863,8 @@
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	intel_clock_t clock;
-	int max_n;
-	bool found;
 	int err_most = 47;
-	found = false;
+	int err_min = 10000;
 
 	/* eDP has only 2 clock choice, no n/m/p setting */
 	if (HAS_eDP)
@@ -890,10 +888,9 @@
 	}
 
 	memset(best_clock, 0, sizeof(*best_clock));
-	max_n = limit->n.max;
 	for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
 		/* based on hardware requriment prefer smaller n to precision */
-		for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) {
 			/* based on hardware requirment prefere larger m1,m2 */
 			for (clock.m1 = limit->m1.max;
 			     clock.m1 >= limit->m1.min; clock.m1--) {
@@ -907,18 +904,18 @@
 					this_err = abs((10000 - (target*10000/clock.dot)));
 					if (this_err < err_most) {
 						*best_clock = clock;
-						err_most = this_err;
-						max_n = clock.n;
-						found = true;
 						/* found on first matching */
 						goto out;
+					} else if (this_err < err_min) {
+						*best_clock = clock;
+						err_min = this_err;
 					}
 				}
 			}
 		}
 	}
 out:
-	return found;
+	return true;
 }
 
 /* DisplayPort has only two frequencies, 162MHz and 270MHz */
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 663ab6d..c33451a 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -77,14 +77,32 @@
 	struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
 	u32 temp;
 
-	if (mode != DRM_MODE_DPMS_ON) {
-		temp = I915_READ(hdmi_priv->sdvox_reg);
+	temp = I915_READ(hdmi_priv->sdvox_reg);
+
+	/* HW workaround, need to toggle enable bit off and on for 12bpc, but
+	 * we do this anyway which shows more stable in testing.
+	 */
+	if (IS_IGDNG(dev)) {
 		I915_WRITE(hdmi_priv->sdvox_reg, temp & ~SDVO_ENABLE);
-	} else {
-		temp = I915_READ(hdmi_priv->sdvox_reg);
-		I915_WRITE(hdmi_priv->sdvox_reg, temp | SDVO_ENABLE);
+		POSTING_READ(hdmi_priv->sdvox_reg);
 	}
+
+	if (mode != DRM_MODE_DPMS_ON) {
+		temp &= ~SDVO_ENABLE;
+	} else {
+		temp |= SDVO_ENABLE;
+	}
+
+	I915_WRITE(hdmi_priv->sdvox_reg, temp);
 	POSTING_READ(hdmi_priv->sdvox_reg);
+
+	/* HW workaround, need to write this twice for issue that may result
+	 * in first write getting masked.
+	 */
+	if (IS_IGDNG(dev)) {
+		I915_WRITE(hdmi_priv->sdvox_reg, temp);
+		POSTING_READ(hdmi_priv->sdvox_reg);
+	}
 }
 
 static void intel_hdmi_save(struct drm_connector *connector)
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 901befe..d67c425 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -107,6 +107,7 @@
 			base += 3;
 			break;
 		case ATOM_IIO_WRITE:
+			(void)ctx->card->reg_read(ctx->card, CU16(base + 1));
 			ctx->card->reg_write(ctx->card, CU16(base + 1), temp);
 			base += 3;
 			break;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 757f5cd..224506a2 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -519,6 +519,7 @@
  * AGP
  */
 int radeon_agp_init(struct radeon_device *rdev);
+void radeon_agp_resume(struct radeon_device *rdev);
 void radeon_agp_fini(struct radeon_device *rdev);
 
 
diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c
index 23ea995..54bf49a 100644
--- a/drivers/gpu/drm/radeon/radeon_agp.c
+++ b/drivers/gpu/drm/radeon/radeon_agp.c
@@ -237,6 +237,18 @@
 #endif
 }
 
+void radeon_agp_resume(struct radeon_device *rdev)
+{
+#if __OS_HAS_AGP
+	int r;
+	if (rdev->flags & RADEON_IS_AGP) {
+		r = radeon_agp_init(rdev);
+		if (r)
+			dev_warn(rdev->dev, "radeon AGP reinit failed\n");
+	}
+#endif
+}
+
 void radeon_agp_fini(struct radeon_device *rdev)
 {
 #if __OS_HAS_AGP
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index fce4c40..29763ce 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -566,8 +566,9 @@
 		radeon_i2c_do_lock(radeon_connector, 0);
 
 		if (!radeon_connector->edid) {
-			DRM_ERROR("DDC responded but not EDID found for %s\n",
-				  drm_get_connector_name(connector));
+			DRM_ERROR("%s: probed a monitor but no|invalid EDID\n",
+					drm_get_connector_name(connector));
+			ret = connector_status_connected;
 		} else {
 			radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
 
@@ -720,8 +721,8 @@
 		radeon_i2c_do_lock(radeon_connector, 0);
 
 		if (!radeon_connector->edid) {
-			DRM_ERROR("DDC responded but not EDID found for %s\n",
-				  drm_get_connector_name(connector));
+			DRM_ERROR("%s: probed a monitor but no|invalid EDID\n",
+					drm_get_connector_name(connector));
 		} else {
 			radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
 
@@ -1149,6 +1150,13 @@
 			if (ret)
 				goto failed;
 			radeon_connector->dac_load_detect = true;
+			/* RS400,RC410,RS480 chipset seems to report a lot
+			 * of false positive on load detect, we haven't yet
+			 * found a way to make load detect reliable on those
+			 * chipset, thus just disable it for TV.
+			 */
+			if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480)
+				radeon_connector->dac_load_detect = false;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index e3f9edf..41bb76f 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -688,6 +688,8 @@
 		return -1;
 	}
 	pci_set_master(dev->pdev);
+	/* resume AGP if in use */
+	radeon_agp_resume(rdev);
 	radeon_resume(rdev);
 	radeon_restore_bios_scratch_regs(rdev);
 	fb_set_suspend(rdev->fbdev_info, 0);
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index 7935f79..ba68c9f 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -137,8 +137,6 @@
 
 void rv515_vga_render_disable(struct radeon_device *rdev)
 {
-	WREG32(R_000330_D1VGA_CONTROL, 0);
-	WREG32(R_000338_D2VGA_CONTROL, 0);
 	WREG32(R_000300_VGA_RENDER_CONTROL,
 		RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL);
 }
@@ -382,7 +380,6 @@
 	save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL);
 
 	/* Stop all video */
-	WREG32(R_000330_D1VGA_CONTROL, 0);
 	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
 	WREG32(R_000300_VGA_RENDER_CONTROL, 0);
 	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
@@ -391,6 +388,8 @@
 	WREG32(R_006880_D2CRTC_CONTROL, 0);
 	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
 	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000330_D1VGA_CONTROL, 0);
+	WREG32(R_000338_D2VGA_CONTROL, 0);
 }
 
 void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save)
@@ -404,14 +403,14 @@
 	WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control);
 	mdelay(1);
 	/* Restore video state */
+	WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
+	WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
 	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
 	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
 	WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control);
 	WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control);
 	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
 	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
-	WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
-	WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
 	WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control);
 }
 
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d7ece13..8d8a00e 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -5,6 +5,7 @@
 menuconfig I2C
 	tristate "I2C support"
 	depends on HAS_IOMEM
+	select RT_MUTEXES
 	---help---
 	  I2C (pronounce: I-square-C) is a slow serial bus protocol used in
 	  many micro controller applications and developed by Philips.  SMBus,
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index e8fe7f1..5f318ce 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -640,22 +640,6 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-tiny-usb.
 
-comment "Graphics adapter I2C/DDC channel drivers"
-	depends on PCI
-
-config I2C_VOODOO3
-	tristate "Voodoo 3 (DEPRECATED)"
-	depends on PCI
-	select I2C_ALGOBIT
-	help
-	  If you say yes to this option, support will be included for the
-	  Voodoo 3 I2C interface. This driver is deprecated and you should
-	  use the tdfxfb driver instead, which additionally provides
-	  framebuffer support.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called i2c-voodoo3.
-
 comment "Other I2C/SMBus bus drivers"
 
 config I2C_ACORN
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ff937ac..302c551 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -61,9 +61,6 @@
 obj-$(CONFIG_I2C_TAOS_EVM)	+= i2c-taos-evm.o
 obj-$(CONFIG_I2C_TINY_USB)	+= i2c-tiny-usb.o
 
-# Graphics adapter I2C/DDC channel drivers
-obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o
-
 # Other I2C/SMBus bus drivers
 obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index d108450..8de7d7b 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -138,7 +138,7 @@
    Note the differences between kernels with the old PCI BIOS interface and
    newer kernels with the real PCI interface. In compat.h some things are
    defined to make the transition easier. */
-static int ali1535_setup(struct pci_dev *dev)
+static int __devinit ali1535_setup(struct pci_dev *dev)
 {
 	int retval = -ENODEV;
 	unsigned char temp;
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index d627fce..e7e3205 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -131,7 +131,7 @@
 static struct pci_driver ali15x3_driver;
 static unsigned short ali15x3_smba;
 
-static int ali15x3_setup(struct pci_dev *ALI15X3_dev)
+static int __devinit ali15x3_setup(struct pci_dev *ALI15X3_dev)
 {
 	u16 a;
 	unsigned char temp;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 55edcfe..df6ab553 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -767,6 +767,9 @@
 	/* set up the sysfs linkage to our parent device */
 	i801_adapter.dev.parent = &dev->dev;
 
+	/* Retry up to 3 times on lost arbitration */
+	i801_adapter.retries = 3;
+
 	snprintf(i801_adapter.name, sizeof(i801_adapter.name),
 		"SMBus I801 adapter at %04lx", i801_smba);
 	err = i2c_add_adapter(&i801_adapter);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index a75c75e..5901707 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -56,12 +56,6 @@
 	if (msg->flags & I2C_M_RD)
 		addr |= 1;
 
-	/*
-	 * Read or Write?
-	 */
-	if (msg->flags & I2C_M_REV_DIR_ADDR)
-		addr ^= 1;
-
 	return addr;   
 }
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index bbab0e1..ed387ff 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -338,9 +338,6 @@
 	if (msg->flags & I2C_M_RD)
 		dir = 1;
 
-	if (msg->flags & I2C_M_REV_DIR_ADDR)
-		dir ^= 1;
-
 	if (msg->flags & I2C_M_TEN) {
 		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
 		drv_data->addr2 = (u32)msg->addr & 0xff;
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 1fca590..fbab684 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -650,7 +650,7 @@
 	return 0;
 
 out_irq:
-	free_irq(alg_data->irq, alg_data);
+	free_irq(alg_data->irq, i2c_pnx->adapter);
 out_clock:
 	i2c_pnx->set_clock_stop(pdev);
 out_unmap:
@@ -669,7 +669,7 @@
 	struct i2c_adapter *adap = i2c_pnx->adapter;
 	struct i2c_pnx_algo_data *alg_data = adap->algo_data;
 
-	free_irq(alg_data->irq, alg_data);
+	free_irq(alg_data->irq, i2c_pnx->adapter);
 	i2c_del_adapter(adap);
 	i2c_pnx->set_clock_stop(pdev);
 	iounmap((void *)alg_data->ioaddr);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 3c9d71f..1c440a7 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -49,48 +49,38 @@
 	int			rc = 0;
 	int			read = (read_write == I2C_SMBUS_READ);
 	int			addrdir = (addr << 1) | read;
+	int			mode, subsize, len;
+	u32			subaddr;
+	u8			*buf;
 	u8			local[2];
 
-	rc = pmac_i2c_open(bus, 0);
-	if (rc)
-		return rc;
+	if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) {
+		mode = pmac_i2c_mode_std;
+		subsize = 0;
+		subaddr = 0;
+	} else {
+		mode = read ? pmac_i2c_mode_combined : pmac_i2c_mode_stdsub;
+		subsize = 1;
+		subaddr = command;
+	}
 
 	switch (size) {
         case I2C_SMBUS_QUICK:
-		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, NULL, 0);
+		buf = NULL;
+		len = 0;
 	    	break;
         case I2C_SMBUS_BYTE:
-		rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 0, 0, &data->byte, 1);
-	    	break;
         case I2C_SMBUS_BYTE_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command, &data->byte, 1);
+		buf = &data->byte;
+		len = 1;
 	    	break;
         case I2C_SMBUS_WORD_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
 		if (!read) {
 			local[0] = data->word & 0xff;
 			local[1] = (data->word >> 8) & 0xff;
 		}
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command, local, 2);
-		if (rc == 0 && read) {
-			data->word = ((u16)local[1]) << 8;
-			data->word |= local[0];
-		}
+		buf = local;
+		len = 2;
 	    	break;
 
 	/* Note that these are broken vs. the expected smbus API where
@@ -105,28 +95,44 @@
 	 * a repeat start/addr phase (but not stop in between)
 	 */
         case I2C_SMBUS_BLOCK_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command, data->block,
-				   data->block[0] + 1);
-
+		buf = data->block;
+		len = data->block[0] + 1;
 		break;
 	case I2C_SMBUS_I2C_BLOCK_DATA:
-		rc = pmac_i2c_setmode(bus, read ?
-				      pmac_i2c_mode_combined :
-				      pmac_i2c_mode_stdsub);
-		if (rc)
-			goto bail;
-		rc = pmac_i2c_xfer(bus, addrdir, 1, command,
-				   &data->block[1], data->block[0]);
+		buf = &data->block[1];
+		len = data->block[0];
 		break;
 
         default:
-	    	rc = -EINVAL;
+		return -EINVAL;
 	}
+
+	rc = pmac_i2c_open(bus, 0);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
+		return rc;
+	}
+
+	rc = pmac_i2c_setmode(bus, mode);
+	if (rc) {
+		dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+			mode, rc);
+		goto bail;
+	}
+
+	rc = pmac_i2c_xfer(bus, addrdir, subsize, subaddr, buf, len);
+	if (rc) {
+		dev_err(&adap->dev,
+			"I2C transfer at 0x%02x failed, size %d, err %d\n",
+			addrdir >> 1, size, rc);
+		goto bail;
+	}
+
+	if (size == I2C_SMBUS_WORD_DATA && read) {
+		data->word = ((u16)local[1]) << 8;
+		data->word |= local[0];
+	}
+
  bail:
 	pmac_i2c_close(bus);
 	return rc;
@@ -146,20 +152,33 @@
 	int			read;
 	int			addrdir;
 
+	if (num != 1) {
+		dev_err(&adap->dev,
+			"Multi-message I2C transactions not supported\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (msgs->flags & I2C_M_TEN)
 		return -EINVAL;
 	read = (msgs->flags & I2C_M_RD) != 0;
 	addrdir = (msgs->addr << 1) | read;
-	if (msgs->flags & I2C_M_REV_DIR_ADDR)
-		addrdir ^= 1;
 
 	rc = pmac_i2c_open(bus, 0);
-	if (rc)
+	if (rc) {
+		dev_err(&adap->dev, "Failed to open I2C, err %d\n", rc);
 		return rc;
+	}
 	rc = pmac_i2c_setmode(bus, pmac_i2c_mode_std);
-	if (rc)
+	if (rc) {
+		dev_err(&adap->dev, "Failed to set I2C mode %d, err %d\n",
+			pmac_i2c_mode_std, rc);
 		goto bail;
+	}
 	rc = pmac_i2c_xfer(bus, addrdir, 0, 0, msgs->buf, msgs->len);
+	if (rc < 0)
+		dev_err(&adap->dev, "I2C %s 0x%02x failed, err %d\n",
+			addrdir & 1 ? "read from" : "write to", addrdir >> 1,
+			rc);
  bail:
 	pmac_i2c_close(bus);
 	return rc < 0 ? rc : 1;
@@ -183,19 +202,16 @@
 static int __devexit i2c_powermac_remove(struct platform_device *dev)
 {
 	struct i2c_adapter	*adapter = platform_get_drvdata(dev);
-	struct pmac_i2c_bus	*bus = i2c_get_adapdata(adapter);
 	int			rc;
 
 	rc = i2c_del_adapter(adapter);
-	pmac_i2c_detach_adapter(bus, adapter);
-	i2c_set_adapdata(adapter, NULL);
 	/* We aren't that prepared to deal with this... */
 	if (rc)
 		printk(KERN_WARNING
 		       "i2c-powermac.c: Failed to remove bus %s !\n",
 		       adapter->name);
 	platform_set_drvdata(dev, NULL);
-	kfree(adapter);
+	memset(adapter, 0, sizeof(*adapter));
 
 	return 0;
 }
@@ -206,12 +222,12 @@
 	struct pmac_i2c_bus *bus = dev->dev.platform_data;
 	struct device_node *parent = NULL;
 	struct i2c_adapter *adapter;
-	char name[32];
 	const char *basename;
 	int rc;
 
 	if (bus == NULL)
 		return -EINVAL;
+	adapter = pmac_i2c_get_adapter(bus);
 
 	/* Ok, now we need to make up a name for the interface that will
 	 * match what we used to do in the past, that is basically the
@@ -237,29 +253,22 @@
 	default:
 		return -EINVAL;
 	}
-	snprintf(name, 32, "%s %d", basename, pmac_i2c_get_channel(bus));
+	snprintf(adapter->name, sizeof(adapter->name), "%s %d", basename,
+		 pmac_i2c_get_channel(bus));
 	of_node_put(parent);
 
-	adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
-	if (adapter == NULL) {
-		printk(KERN_ERR "i2c-powermac: can't allocate inteface !\n");
-		return -ENOMEM;
-	}
 	platform_set_drvdata(dev, adapter);
-	strcpy(adapter->name, name);
 	adapter->algo = &i2c_powermac_algorithm;
 	i2c_set_adapdata(adapter, bus);
 	adapter->dev.parent = &dev->dev;
-	pmac_i2c_attach_adapter(bus, adapter);
 	rc = i2c_add_adapter(adapter);
 	if (rc) {
 		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
-		       "failed\n", name);
-		i2c_set_adapdata(adapter, NULL);
-		pmac_i2c_detach_adapter(bus, adapter);
+		       "failed\n", adapter->name);
+		memset(adapter, 0, sizeof(*adapter));
 	}
 
-	printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+	printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
 
 	if (!strncmp(basename, "uni-n", 5)) {
 		struct device_node *np;
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 139f0c7..844569f 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -142,7 +142,7 @@
 	outb(data, sis5595_base + SMB_DAT);
 }
 
-static int sis5595_setup(struct pci_dev *SIS5595_dev)
+static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev)
 {
 	u16 a;
 	u8 val;
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 70ca41e..68cff7a 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -389,7 +389,7 @@
 		I2C_FUNC_SMBUS_BLOCK_DATA;
 }
 
-static int sis630_setup(struct pci_dev *sis630_dev)
+static int __devinit sis630_setup(struct pci_dev *sis630_dev)
 {
 	unsigned char b;
 	struct pci_dev *dummy = NULL;
diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c
index 1b7b2af..0c770ea 100644
--- a/drivers/i2c/busses/i2c-stub.c
+++ b/drivers/i2c/busses/i2c-stub.c
@@ -35,6 +35,10 @@
 MODULE_PARM_DESC(chip_addr,
 		 "Chip addresses (up to 10, between 0x03 and 0x77)");
 
+static unsigned long functionality = ~0UL;
+module_param(functionality, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(functionality, "Override functionality bitfield");
+
 struct stub_chip {
 	u8 pointer;
 	u16 words[256];		/* Byte operations use the LSB as per SMBus
@@ -48,7 +52,7 @@
 	char read_write, u8 command, int size, union i2c_smbus_data * data)
 {
 	s32 ret;
-	int i;
+	int i, len;
 	struct stub_chip *chip = NULL;
 
 	/* Search for the right chip */
@@ -118,6 +122,29 @@
 		ret = 0;
 		break;
 
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		len = data->block[0];
+		if (read_write == I2C_SMBUS_WRITE) {
+			for (i = 0; i < len; i++) {
+				chip->words[command + i] &= 0xff00;
+				chip->words[command + i] |= data->block[1 + i];
+			}
+			dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
+					"wrote %d bytes at 0x%02x.\n",
+					addr, len, command);
+		} else {
+			for (i = 0; i < len; i++) {
+				data->block[1 + i] =
+					chip->words[command + i] & 0xff;
+			}
+			dev_dbg(&adap->dev, "i2c block data - addr 0x%02x, "
+					"read  %d bytes at 0x%02x.\n",
+					addr, len, command);
+		}
+
+		ret = 0;
+		break;
+
 	default:
 		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n");
 		ret = -EOPNOTSUPP;
@@ -129,8 +156,9 @@
 
 static u32 stub_func(struct i2c_adapter *adapter)
 {
-	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_I2C_BLOCK) & functionality;
 }
 
 static const struct i2c_algorithm smbus_algorithm = {
diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c
deleted file mode 100644
index 7663d57..0000000
--- a/drivers/i2c/busses/i2c-voodoo3.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
-    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
-    Philip Edelbrock <phil@netroedge.com>,
-    Ralph Metzler <rjkm@thp.uni-koeln.de>, and
-    Mark D. Studebaker <mdsxyz123@yahoo.com>
-    
-    Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
-    Simon Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This interfaces to the I2C bus of the Voodoo3 to gain access to
-    the BT869 and possibly other I2C devices. */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <asm/io.h>
-
-/* the only registers we use */
-#define REG		0x78
-#define REG2 		0x70
-
-/* bit locations in the register */
-#define DDC_ENAB	0x00040000
-#define DDC_SCL_OUT	0x00080000
-#define DDC_SDA_OUT	0x00100000
-#define DDC_SCL_IN	0x00200000
-#define DDC_SDA_IN	0x00400000
-#define I2C_ENAB	0x00800000
-#define I2C_SCL_OUT	0x01000000
-#define I2C_SDA_OUT	0x02000000
-#define I2C_SCL_IN	0x04000000
-#define I2C_SDA_IN	0x08000000
-
-/* initialization states */
-#define INIT2		0x2
-#define INIT3		0x4
-
-/* delays */
-#define CYCLE_DELAY	10
-#define TIMEOUT		(HZ / 2)
-
-
-static void __iomem *ioaddr;
-
-/* The voo GPIO registers don't have individual masks for each bit
-   so we always have to read before writing. */
-
-static void bit_vooi2c_setscl(void *data, int val)
-{
-	unsigned int r;
-	r = readl(ioaddr + REG);
-	if (val)
-		r |= I2C_SCL_OUT;
-	else
-		r &= ~I2C_SCL_OUT;
-	writel(r, ioaddr + REG);
-	readl(ioaddr + REG);	/* flush posted write */
-}
-
-static void bit_vooi2c_setsda(void *data, int val)
-{
-	unsigned int r;
-	r = readl(ioaddr + REG);
-	if (val)
-		r |= I2C_SDA_OUT;
-	else
-		r &= ~I2C_SDA_OUT;
-	writel(r, ioaddr + REG);
-	readl(ioaddr + REG);	/* flush posted write */
-}
-
-/* The GPIO pins are open drain, so the pins always remain outputs.
-   We rely on the i2c-algo-bit routines to set the pins high before
-   reading the input from other chips. */
-
-static int bit_vooi2c_getscl(void *data)
-{
-	return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
-}
-
-static int bit_vooi2c_getsda(void *data)
-{
-	return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
-}
-
-static void bit_vooddc_setscl(void *data, int val)
-{
-	unsigned int r;
-	r = readl(ioaddr + REG);
-	if (val)
-		r |= DDC_SCL_OUT;
-	else
-		r &= ~DDC_SCL_OUT;
-	writel(r, ioaddr + REG);
-	readl(ioaddr + REG);	/* flush posted write */
-}
-
-static void bit_vooddc_setsda(void *data, int val)
-{
-	unsigned int r;
-	r = readl(ioaddr + REG);
-	if (val)
-		r |= DDC_SDA_OUT;
-	else
-		r &= ~DDC_SDA_OUT;
-	writel(r, ioaddr + REG);
-	readl(ioaddr + REG);	/* flush posted write */
-}
-
-static int bit_vooddc_getscl(void *data)
-{
-	return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
-}
-
-static int bit_vooddc_getsda(void *data)
-{
-	return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
-}
-
-static int config_v3(struct pci_dev *dev)
-{
-	unsigned long cadr;
-
-	/* map Voodoo3 memory */
-	cadr = dev->resource[0].start;
-	cadr &= PCI_BASE_ADDRESS_MEM_MASK;
-	ioaddr = ioremap_nocache(cadr, 0x1000);
-	if (ioaddr) {
-		writel(0x8160, ioaddr + REG2);
-		writel(0xcffc0020, ioaddr + REG);
-		dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static struct i2c_algo_bit_data voo_i2c_bit_data = {
-	.setsda		= bit_vooi2c_setsda,
-	.setscl		= bit_vooi2c_setscl,
-	.getsda		= bit_vooi2c_getsda,
-	.getscl		= bit_vooi2c_getscl,
-	.udelay		= CYCLE_DELAY,
-	.timeout	= TIMEOUT
-};
-
-static struct i2c_adapter voodoo3_i2c_adapter = {
-	.owner		= THIS_MODULE,
-	.name		= "I2C Voodoo3/Banshee adapter",
-	.algo_data	= &voo_i2c_bit_data,
-};
-
-static struct i2c_algo_bit_data voo_ddc_bit_data = {
-	.setsda		= bit_vooddc_setsda,
-	.setscl		= bit_vooddc_setscl,
-	.getsda		= bit_vooddc_getsda,
-	.getscl		= bit_vooddc_getscl,
-	.udelay		= CYCLE_DELAY,
-	.timeout	= TIMEOUT
-};
-
-static struct i2c_adapter voodoo3_ddc_adapter = {
-	.owner		= THIS_MODULE,
-	.class		= I2C_CLASS_DDC, 
-	.name		= "DDC Voodoo3/Banshee adapter",
-	.algo_data	= &voo_ddc_bit_data,
-};
-
-static struct pci_device_id voodoo3_ids[] __devinitdata = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
-	{ 0, }
-};
-
-MODULE_DEVICE_TABLE (pci, voodoo3_ids);
-
-static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	int retval;
-
-	retval = config_v3(dev);
-	if (retval)
-		return retval;
-
-	/* set up the sysfs linkage to our parent device */
-	voodoo3_i2c_adapter.dev.parent = &dev->dev;
-	voodoo3_ddc_adapter.dev.parent = &dev->dev;
-
-	retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
-	if (retval)
-		return retval;
-	retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
-	if (retval)
-		i2c_del_adapter(&voodoo3_i2c_adapter);
-	return retval;
-}
-
-static void __devexit voodoo3_remove(struct pci_dev *dev)
-{
-	i2c_del_adapter(&voodoo3_i2c_adapter);
-	i2c_del_adapter(&voodoo3_ddc_adapter);
-	iounmap(ioaddr);
-}
-
-static struct pci_driver voodoo3_driver = {
-	.name		= "voodoo3_smbus",
-	.id_table	= voodoo3_ids,
-	.probe		= voodoo3_probe,
-	.remove		= __devexit_p(voodoo3_remove),
-};
-
-static int __init i2c_voodoo3_init(void)
-{
-	return pci_register_driver(&voodoo3_driver);
-}
-
-static void __exit i2c_voodoo3_exit(void)
-{
-	pci_unregister_driver(&voodoo3_driver);
-}
-
-
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
-		"Philip Edelbrock <phil@netroedge.com>, "
-		"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
-		"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
-MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_voodoo3_init);
-module_exit(i2c_voodoo3_exit);
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index f9618f4..ae4539d 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -6,16 +6,6 @@
 
 menu "Miscellaneous I2C Chip support"
 
-config DS1682
-	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
-	depends on EXPERIMENTAL
-	help
-	  If you say yes here you get support for Dallas Semiconductor
-	  DS1682 Total Elapsed Time Recorder.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called ds1682.
-
 config SENSORS_TSL2550
 	tristate "Taos TSL2550 ambient light sensor"
 	depends on EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 749cf36..fe0af0f 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -10,7 +10,6 @@
 # * I/O expander drivers go to drivers/gpio
 #
 
-obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index aa96bd2..a0702f3 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -257,6 +257,7 @@
 
 static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
 {
+	struct tsl2550_data *data = i2c_get_clientdata(client);
 	u8 ch0, ch1;
 	int ret;
 
@@ -274,6 +275,8 @@
 	ret = tsl2550_calculate_lux(ch0, ch1);
 	if (ret < 0)
 		return ret;
+	if (data->operating_mode == 1)
+		ret *= 5;
 
 	return sprintf(buf, "%d\n", ret);
 }
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 8d80fce..4f34823 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -558,11 +558,9 @@
 	up_read(&__i2c_board_lock);
 }
 
-static int i2c_do_add_adapter(struct device_driver *d, void *data)
+static int i2c_do_add_adapter(struct i2c_driver *driver,
+			      struct i2c_adapter *adap)
 {
-	struct i2c_driver *driver = to_i2c_driver(d);
-	struct i2c_adapter *adap = data;
-
 	/* Detect supported devices on that bus, and instantiate them */
 	i2c_detect(adap, driver);
 
@@ -574,6 +572,11 @@
 	return 0;
 }
 
+static int __process_new_adapter(struct device_driver *d, void *data)
+{
+	return i2c_do_add_adapter(to_i2c_driver(d), data);
+}
+
 static int i2c_register_adapter(struct i2c_adapter *adap)
 {
 	int res = 0, dummy;
@@ -584,7 +587,7 @@
 		goto out_list;
 	}
 
-	mutex_init(&adap->bus_lock);
+	rt_mutex_init(&adap->bus_lock);
 
 	/* Set default timeout to 1 second if not already set */
 	if (adap->timeout == 0)
@@ -614,7 +617,7 @@
 	/* Notify drivers */
 	mutex_lock(&core_lock);
 	dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap,
-				 i2c_do_add_adapter);
+				 __process_new_adapter);
 	mutex_unlock(&core_lock);
 
 	return 0;
@@ -715,10 +718,9 @@
 }
 EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
 
-static int i2c_do_del_adapter(struct device_driver *d, void *data)
+static int i2c_do_del_adapter(struct i2c_driver *driver,
+			      struct i2c_adapter *adapter)
 {
-	struct i2c_driver *driver = to_i2c_driver(d);
-	struct i2c_adapter *adapter = data;
 	struct i2c_client *client, *_n;
 	int res;
 
@@ -750,6 +752,11 @@
 	return 0;
 }
 
+static int __process_removed_adapter(struct device_driver *d, void *data)
+{
+	return i2c_do_del_adapter(to_i2c_driver(d), data);
+}
+
 /**
  * i2c_del_adapter - unregister I2C adapter
  * @adap: the adapter being unregistered
@@ -762,6 +769,7 @@
 {
 	int res = 0;
 	struct i2c_adapter *found;
+	struct i2c_client *client, *next;
 
 	/* First make sure that this adapter was ever added */
 	mutex_lock(&core_lock);
@@ -776,11 +784,21 @@
 	/* Tell drivers about this removal */
 	mutex_lock(&core_lock);
 	res = bus_for_each_drv(&i2c_bus_type, NULL, adap,
-			       i2c_do_del_adapter);
+			       __process_removed_adapter);
 	mutex_unlock(&core_lock);
 	if (res)
 		return res;
 
+	/* Remove devices instantiated from sysfs */
+	list_for_each_entry_safe(client, next, &userspace_devices, detected) {
+		if (client->adapter == adap) {
+			dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
+				client->name, client->addr);
+			list_del(&client->detected);
+			i2c_unregister_device(client);
+		}
+	}
+
 	/* Detach any active clients. This can't fail, thus we do not
 	   checking the returned value. */
 	res = device_for_each_child(&adap->dev, NULL, __unregister_client);
@@ -815,22 +833,11 @@
 
 /* ------------------------------------------------------------------------- */
 
-static int __attach_adapter(struct device *dev, void *data)
+static int __process_new_driver(struct device *dev, void *data)
 {
-	struct i2c_adapter *adapter;
-	struct i2c_driver *driver = data;
-
 	if (dev->type != &i2c_adapter_type)
 		return 0;
-	adapter = to_i2c_adapter(dev);
-
-	i2c_detect(adapter, driver);
-
-	/* Legacy drivers scan i2c busses directly */
-	if (driver->attach_adapter)
-		driver->attach_adapter(adapter);
-
-	return 0;
+	return i2c_do_add_adapter(data, to_i2c_adapter(dev));
 }
 
 /*
@@ -862,40 +869,18 @@
 	INIT_LIST_HEAD(&driver->clients);
 	/* Walk the adapters that are already present */
 	mutex_lock(&core_lock);
-	bus_for_each_dev(&i2c_bus_type, NULL, driver, __attach_adapter);
+	bus_for_each_dev(&i2c_bus_type, NULL, driver, __process_new_driver);
 	mutex_unlock(&core_lock);
 
 	return 0;
 }
 EXPORT_SYMBOL(i2c_register_driver);
 
-static int __detach_adapter(struct device *dev, void *data)
+static int __process_removed_driver(struct device *dev, void *data)
 {
-	struct i2c_adapter *adapter;
-	struct i2c_driver *driver = data;
-	struct i2c_client *client, *_n;
-
 	if (dev->type != &i2c_adapter_type)
 		return 0;
-	adapter = to_i2c_adapter(dev);
-
-	/* Remove the devices we created ourselves as the result of hardware
-	 * probing (using a driver's detect method) */
-	list_for_each_entry_safe(client, _n, &driver->clients, detected) {
-		dev_dbg(&adapter->dev, "Removing %s at 0x%x\n",
-			client->name, client->addr);
-		list_del(&client->detected);
-		i2c_unregister_device(client);
-	}
-
-	if (driver->detach_adapter) {
-		if (driver->detach_adapter(adapter))
-			dev_err(&adapter->dev,
-				"detach_adapter failed for driver [%s]\n",
-				driver->driver.name);
-	}
-
-	return 0;
+	return i2c_do_del_adapter(data, to_i2c_adapter(dev));
 }
 
 /**
@@ -906,7 +891,7 @@
 void i2c_del_driver(struct i2c_driver *driver)
 {
 	mutex_lock(&core_lock);
-	bus_for_each_dev(&i2c_bus_type, NULL, driver, __detach_adapter);
+	bus_for_each_dev(&i2c_bus_type, NULL, driver, __process_removed_driver);
 	mutex_unlock(&core_lock);
 
 	driver_unregister(&driver->driver);
@@ -1081,12 +1066,12 @@
 #endif
 
 		if (in_atomic() || irqs_disabled()) {
-			ret = mutex_trylock(&adap->bus_lock);
+			ret = rt_mutex_trylock(&adap->bus_lock);
 			if (!ret)
 				/* I2C activity is ongoing. */
 				return -EAGAIN;
 		} else {
-			mutex_lock_nested(&adap->bus_lock, adap->level);
+			rt_mutex_lock(&adap->bus_lock);
 		}
 
 		/* Retry automatically on arbitration loss */
@@ -1098,7 +1083,7 @@
 			if (time_after(jiffies, orig_jiffies + adap->timeout))
 				break;
 		}
-		mutex_unlock(&adap->bus_lock);
+		rt_mutex_unlock(&adap->bus_lock);
 
 		return ret;
 	} else {
@@ -1169,7 +1154,7 @@
  * ----------------------------------------------------
  */
 
-static int i2c_detect_address(struct i2c_client *temp_client, int kind,
+static int i2c_detect_address(struct i2c_client *temp_client,
 			      struct i2c_driver *driver)
 {
 	struct i2c_board_info info;
@@ -1188,22 +1173,18 @@
 	if (i2c_check_addr(adapter, addr))
 		return 0;
 
-	/* Make sure there is something at this address, unless forced */
-	if (kind < 0) {
-		if (i2c_smbus_xfer(adapter, addr, 0, 0, 0,
-				   I2C_SMBUS_QUICK, NULL) < 0)
-			return 0;
+	/* Make sure there is something at this address */
+	if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
+		return 0;
 
-		/* prevent 24RF08 corruption */
-		if ((addr & ~0x0f) == 0x50)
-			i2c_smbus_xfer(adapter, addr, 0, 0, 0,
-				       I2C_SMBUS_QUICK, NULL);
-	}
+	/* Prevent 24RF08 corruption */
+	if ((addr & ~0x0f) == 0x50)
+		i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL);
 
 	/* Finally call the custom detection function */
 	memset(&info, 0, sizeof(struct i2c_board_info));
 	info.addr = addr;
-	err = driver->detect(temp_client, kind, &info);
+	err = driver->detect(temp_client, -1, &info);
 	if (err) {
 		/* -ENODEV is returned if the detection fails. We catch it
 		   here as this isn't an error. */
@@ -1248,40 +1229,13 @@
 		return -ENOMEM;
 	temp_client->adapter = adapter;
 
-	/* Force entries are done first, and are not affected by ignore
-	   entries */
-	if (address_data->forces) {
-		const unsigned short * const *forces = address_data->forces;
-		int kind;
-
-		for (kind = 0; forces[kind]; kind++) {
-			for (i = 0; forces[kind][i] != I2C_CLIENT_END;
-			     i += 2) {
-				if (forces[kind][i] == adap_id
-				 || forces[kind][i] == ANY_I2C_BUS) {
-					dev_dbg(&adapter->dev, "found force "
-						"parameter for adapter %d, "
-						"addr 0x%02x, kind %d\n",
-						adap_id, forces[kind][i + 1],
-						kind);
-					temp_client->addr = forces[kind][i + 1];
-					err = i2c_detect_address(temp_client,
-						kind, driver);
-					if (err)
-						goto exit_free;
-				}
-			}
-		}
-	}
-
 	/* Stop here if the classes do not match */
 	if (!(adapter->class & driver->class))
 		goto exit_free;
 
 	/* Stop here if we can't use SMBUS_QUICK */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
-		if (address_data->probe[0] == I2C_CLIENT_END
-		 && address_data->normal_i2c[0] == I2C_CLIENT_END)
+		if (address_data->normal_i2c[0] == I2C_CLIENT_END)
 			goto exit_free;
 
 		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
@@ -1290,48 +1244,12 @@
 		goto exit_free;
 	}
 
-	/* Probe entries are done second, and are not affected by ignore
-	   entries either */
-	for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
-		if (address_data->probe[i] == adap_id
-		 || address_data->probe[i] == ANY_I2C_BUS) {
-			dev_dbg(&adapter->dev, "found probe parameter for "
-				"adapter %d, addr 0x%02x\n", adap_id,
-				address_data->probe[i + 1]);
-			temp_client->addr = address_data->probe[i + 1];
-			err = i2c_detect_address(temp_client, -1, driver);
-			if (err)
-				goto exit_free;
-		}
-	}
-
-	/* Normal entries are done last, unless shadowed by an ignore entry */
 	for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) {
-		int j, ignore;
-
-		ignore = 0;
-		for (j = 0; address_data->ignore[j] != I2C_CLIENT_END;
-		     j += 2) {
-			if ((address_data->ignore[j] == adap_id ||
-			     address_data->ignore[j] == ANY_I2C_BUS)
-			 && address_data->ignore[j + 1]
-			    == address_data->normal_i2c[i]) {
-				dev_dbg(&adapter->dev, "found ignore "
-					"parameter for adapter %d, "
-					"addr 0x%02x\n", adap_id,
-					address_data->ignore[j + 1]);
-				ignore = 1;
-				break;
-			}
-		}
-		if (ignore)
-			continue;
-
 		dev_dbg(&adapter->dev, "found normal entry for adapter %d, "
 			"addr 0x%02x\n", adap_id,
 			address_data->normal_i2c[i]);
 		temp_client->addr = address_data->normal_i2c[i];
-		err = i2c_detect_address(temp_client, -1, driver);
+		err = i2c_detect_address(temp_client, driver);
 		if (err)
 			goto exit_free;
 	}
@@ -1902,7 +1820,7 @@
 	flags &= I2C_M_TEN | I2C_CLIENT_PEC;
 
 	if (adapter->algo->smbus_xfer) {
-		mutex_lock(&adapter->bus_lock);
+		rt_mutex_lock(&adapter->bus_lock);
 
 		/* Retry automatically on arbitration loss */
 		orig_jiffies = jiffies;
@@ -1916,7 +1834,7 @@
 				       orig_jiffies + adapter->timeout))
 				break;
 		}
-		mutex_unlock(&adapter->bus_lock);
+		rt_mutex_unlock(&adapter->bus_lock);
 	} else
 		res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
 					      command, protocol, data);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 7e13d2d..f4110aa 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -34,7 +34,6 @@
 #include <linux/list.h>
 #include <linux/i2c.h>
 #include <linux/i2c-dev.h>
-#include <linux/smp_lock.h>
 #include <linux/jiffies.h>
 #include <asm/uaccess.h>
 
@@ -445,20 +444,14 @@
 	struct i2c_client *client;
 	struct i2c_adapter *adap;
 	struct i2c_dev *i2c_dev;
-	int ret = 0;
 
-	lock_kernel();
 	i2c_dev = i2c_dev_get_by_minor(minor);
-	if (!i2c_dev) {
-		ret = -ENODEV;
-		goto out;
-	}
+	if (!i2c_dev)
+		return -ENODEV;
 
 	adap = i2c_get_adapter(i2c_dev->adap->nr);
-	if (!adap) {
-		ret = -ENODEV;
-		goto out;
-	}
+	if (!adap)
+		return -ENODEV;
 
 	/* This creates an anonymous i2c_client, which may later be
 	 * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE.
@@ -470,8 +463,7 @@
 	client = kzalloc(sizeof(*client), GFP_KERNEL);
 	if (!client) {
 		i2c_put_adapter(adap);
-		ret = -ENOMEM;
-		goto out;
+		return -ENOMEM;
 	}
 	snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr);
 	client->driver = &i2cdev_driver;
@@ -479,9 +471,7 @@
 	client->adapter = adap;
 	file->private_data = client;
 
-out:
-	unlock_kernel();
-	return ret;
+	return 0;
 }
 
 static int i2cdev_release(struct inode *inode, struct file *file)
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c
index 063b933..dd63963 100644
--- a/drivers/ide/ide-cs.c
+++ b/drivers/ide/ide-cs.c
@@ -60,15 +60,6 @@
 MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
 MODULE_LICENSE("Dual MPL/GPL");
 
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-#ifdef CONFIG_PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
-
 /*====================================================================*/
 
 typedef struct ide_info_t {
@@ -98,7 +89,7 @@
 {
     ide_info_t *info;
 
-    DEBUG(0, "ide_attach()\n");
+    dev_dbg(&link->dev, "ide_attach()\n");
 
     /* Create new ide device */
     info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -112,7 +103,6 @@
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.IOAddrLines = 3;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -134,7 +124,7 @@
     ide_hwif_t *hwif = info->host->ports[0];
     unsigned long data_addr, ctl_addr;
 
-    DEBUG(0, "ide_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
 
     data_addr = hwif->io_ports.data_addr;
     ctl_addr  = hwif->io_ports.ctl_addr;
@@ -217,9 +207,6 @@
 
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 struct pcmcia_config_check {
 	unsigned long ctl_base;
 	int skip_vcc;
@@ -282,11 +269,11 @@
 {
     ide_info_t *info = link->priv;
     struct pcmcia_config_check *stk = NULL;
-    int last_ret = 0, last_fn = 0, is_kme = 0;
+    int ret = 0, is_kme = 0;
     unsigned long io_base, ctl_base;
     struct ide_host *host;
 
-    DEBUG(0, "ide_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "ide_config(0x%p)\n", link);
 
     is_kme = ((link->manf_id == MANFID_KME) &&
 	      ((link->card_id == PRODID_KME_KXLC005_A) ||
@@ -306,8 +293,12 @@
     io_base = link->io.BasePort1;
     ctl_base = stk->ctl_base;
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     /* disable drive interrupts during IDE probe */
     outb(0x02, ctl_base);
@@ -342,8 +333,6 @@
     printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n");
     goto failed;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     kfree(stk);
     ide_release(link);
@@ -363,7 +352,7 @@
     ide_info_t *info = link->priv;
     struct ide_host *host = info->host;
 
-    DEBUG(0, "ide_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
 
     if (info->ndev)
 	/* FIXME: if this fails we need to queue the cleanup somehow
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index d3440b5..6e7ae2b 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -162,7 +162,7 @@
 	if (tf->command == ATA_CMD_SET_FEATURES &&
 	    tf->feature == SETFEATURES_XFER &&
 	    tf->nsect >= XFER_SW_DMA_0) {
-		xfer_rate = ide_find_dma_mode(drive, XFER_UDMA_6);
+		xfer_rate = ide_find_dma_mode(drive, tf->nsect);
 		if (xfer_rate != tf->nsect) {
 			err = -EINVAL;
 			goto abort;
diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c
index 39d4e01..a743e68 100644
--- a/drivers/ide/ide-pci-generic.c
+++ b/drivers/ide/ide-pci-generic.c
@@ -162,9 +162,10 @@
 #ifdef CONFIG_BLK_DEV_IDE_SATA
 	{ PCI_VDEVICE(VIA,	PCI_DEVICE_ID_VIA_8237_SATA),		 5 },
 #endif
-	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO),		 4 },
 	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_1),	 4 },
 	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_2),	 4 },
+	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_3),	 4 },
+	{ PCI_VDEVICE(TOSHIBA,	PCI_DEVICE_ID_TOSHIBA_PICCOLO_5),	 4 },
 	{ PCI_VDEVICE(NETCELL,	PCI_DEVICE_ID_REVOLUTION),		 6 },
 	/*
 	 * Must come last.  If you add entries adjust
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 65c1429..d0dc1db 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -82,6 +82,7 @@
  *
  */
 
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/slab.h>
@@ -434,7 +435,6 @@
 /* Count the number of available iso contexts */
 static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg)
 {
-	int i,ctx=0;
 	u32 tmp;
 
 	reg_write(ohci, reg, 0xffffffff);
@@ -443,11 +443,7 @@
 	DBGMSG("Iso contexts reg: %08x implemented: %08x", reg, tmp);
 
 	/* Count the number of contexts */
-	for (i=0; i<32; i++) {
-	    	if (tmp & 1) ctx++;
-		tmp >>= 1;
-	}
-	return ctx;
+	return hweight32(tmp);
 }
 
 /* Global initialization */
diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c
index 96a2959..d9d0e13 100644
--- a/drivers/ieee802154/fakehard.c
+++ b/drivers/ieee802154/fakehard.c
@@ -32,9 +32,29 @@
 #include <net/nl802154.h>
 #include <net/wpan-phy.h>
 
-struct wpan_phy *net_to_phy(struct net_device *dev)
+struct fakehard_priv {
+	struct wpan_phy *phy;
+};
+
+static struct wpan_phy *fake_to_phy(const struct net_device *dev)
 {
-	return container_of(dev->dev.parent, struct wpan_phy, dev);
+	struct fakehard_priv *priv = netdev_priv(dev);
+	return priv->phy;
+}
+
+/**
+ * fake_get_phy - Return a phy corresponding to this device.
+ * @dev: The network device for which to return the wan-phy object
+ *
+ * This function returns a wpan-phy object corresponding to the passed
+ * network device. Reference counter for wpan-phy object is incremented,
+ * so when the wpan-phy isn't necessary, you should drop the reference
+ * via @wpan_phy_put() call.
+ */
+static struct wpan_phy *fake_get_phy(const struct net_device *dev)
+{
+	struct wpan_phy *phy = fake_to_phy(dev);
+	return to_phy(get_device(&phy->dev));
 }
 
 /**
@@ -43,7 +63,7 @@
  *
  * Return the ID of the PAN from the PIB.
  */
-static u16 fake_get_pan_id(struct net_device *dev)
+static u16 fake_get_pan_id(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
@@ -58,7 +78,7 @@
  * device. If the device has not yet had a short address assigned
  * then this should return 0xFFFF to indicate a lack of association.
  */
-static u16 fake_get_short_addr(struct net_device *dev)
+static u16 fake_get_short_addr(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
@@ -78,7 +98,7 @@
  * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
  *       document.
  */
-static u8 fake_get_dsn(struct net_device *dev)
+static u8 fake_get_dsn(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
@@ -98,7 +118,7 @@
  * Note: This is in section 7.2.1.2 of the IEEE 802.15.4-2006
  *       document.
  */
-static u8 fake_get_bsn(struct net_device *dev)
+static u8 fake_get_bsn(const struct net_device *dev)
 {
 	BUG_ON(dev->type != ARPHRD_IEEE802154);
 
@@ -121,7 +141,7 @@
 static int fake_assoc_req(struct net_device *dev,
 		struct ieee802154_addr *addr, u8 channel, u8 page, u8 cap)
 {
-	struct wpan_phy *phy = net_to_phy(dev);
+	struct wpan_phy *phy = fake_to_phy(dev);
 
 	mutex_lock(&phy->pib_lock);
 	phy->current_channel = channel;
@@ -196,7 +216,7 @@
 				u8 bcn_ord, u8 sf_ord, u8 pan_coord, u8 blx,
 				u8 coord_realign)
 {
-	struct wpan_phy *phy = net_to_phy(dev);
+	struct wpan_phy *phy = fake_to_phy(dev);
 
 	mutex_lock(&phy->pib_lock);
 	phy->current_channel = channel;
@@ -239,6 +259,8 @@
 	.start_req = fake_start_req,
 	.scan_req = fake_scan_req,
 
+	.get_phy = fake_get_phy,
+
 	.get_pan_id = fake_get_pan_id,
 	.get_short_addr = fake_get_short_addr,
 	.get_dsn = fake_get_dsn,
@@ -260,15 +282,12 @@
 static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb,
 					      struct net_device *dev)
 {
-	skb->iif = dev->ifindex;
-	skb->dev = dev;
 	dev->stats.tx_packets++;
 	dev->stats.tx_bytes += skb->len;
 
-	dev->trans_start = jiffies;
-
 	/* FIXME: do hardware work here ... */
 
+	dev_kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
 
@@ -313,7 +332,7 @@
 
 static void ieee802154_fake_destruct(struct net_device *dev)
 {
-	struct wpan_phy *phy = net_to_phy(dev);
+	struct wpan_phy *phy = fake_to_phy(dev);
 
 	wpan_phy_unregister(phy);
 	free_netdev(dev);
@@ -338,13 +357,14 @@
 static int __devinit ieee802154fake_probe(struct platform_device *pdev)
 {
 	struct net_device *dev;
+	struct fakehard_priv *priv;
 	struct wpan_phy *phy = wpan_phy_alloc(0);
 	int err;
 
 	if (!phy)
 		return -ENOMEM;
 
-	dev = alloc_netdev(0, "hardwpan%d", ieee802154_fake_setup);
+	dev = alloc_netdev(sizeof(struct fakehard_priv), "hardwpan%d", ieee802154_fake_setup);
 	if (!dev) {
 		wpan_phy_free(phy);
 		return -ENOMEM;
@@ -356,12 +376,23 @@
 			dev->addr_len);
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
-	phy->channels_supported = (1 << 27) - 1;
+	/*
+	 * For now we'd like to emulate 2.4 GHz-only device,
+	 * both O-QPSK and CSS
+	 */
+	/* 2.4 GHz O-QPSK 802.15.4-2003 */
+	phy->channels_supported[0] |= 0x7FFF800;
+	/* 2.4 GHz CSS 802.15.4a-2007 */
+	phy->channels_supported[3] |= 0x3fff;
+
 	phy->transmit_power = 0xbf;
 
 	dev->netdev_ops = &fake_ops;
 	dev->ml_priv = &fake_mlme;
 
+	priv = netdev_priv(dev);
+	priv->phy = phy;
+
 	/*
 	 * If the name is a format string the caller wants us to do a
 	 * name allocation.
@@ -372,11 +403,12 @@
 			goto out;
 	}
 
+	wpan_phy_set_dev(phy, &pdev->dev);
 	SET_NETDEV_DEV(dev, &phy->dev);
 
 	platform_set_drvdata(pdev, dev);
 
-	err = wpan_phy_register(&pdev->dev, phy);
+	err = wpan_phy_register(phy);
 	if (err)
 		goto out;
 
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index e593af3..de18fdf 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1080,11 +1080,14 @@
 
 
 /**
- * nes_netdev_get_stats_count
+ * nes_netdev_get_sset_count
  */
-static int nes_netdev_get_stats_count(struct net_device *netdev)
+static int nes_netdev_get_sset_count(struct net_device *netdev, int stringset)
 {
-	return NES_ETHTOOL_STAT_COUNT;
+	if (stringset == ETH_SS_STATS)
+		return NES_ETHTOOL_STAT_COUNT;
+	else
+		return -EINVAL;
 }
 
 
@@ -1264,7 +1267,6 @@
 	sprintf(drvinfo->fw_version, "%u.%u", nesadapter->firmware_version>>16,
 				nesadapter->firmware_version & 0x000000ff);
 	strcpy(drvinfo->version, DRV_VERSION);
-	drvinfo->n_stats = nes_netdev_get_stats_count(netdev);
 	drvinfo->testinfo_len = 0;
 	drvinfo->eedump_len = 0;
 	drvinfo->regdump_len = 0;
@@ -1516,7 +1518,7 @@
 	.get_rx_csum = nes_netdev_get_rx_csum,
 	.get_sg = ethtool_op_get_sg,
 	.get_strings = nes_netdev_get_strings,
-	.get_stats_count = nes_netdev_get_stats_count,
+	.get_sset_count = nes_netdev_get_sset_count,
 	.get_ethtool_stats = nes_netdev_get_ethtool_stats,
 	.get_drvinfo = nes_netdev_get_drvinfo,
 	.get_coalesce = nes_netdev_get_coalesce,
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index bba85ad..1a494d5 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,12 +35,12 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <mach/gpio.h>
-#include <mach/keypad.h>
-#include <mach/menelaus.h>
+#include <plat/keypad.h>
+#include <plat/menelaus.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #undef NEW_BOARD_LEARNING_MODE
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index a537925..2bcf1ac 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -447,6 +447,27 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
 		},
 	},
+	{
+		.ident = "Dell Vostro 1320",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"),
+		},
+	},
+	{
+		.ident = "Dell Vostro 1520",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"),
+		},
+	},
+	{
+		.ident = "Dell Vostro 1720",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index 18ab865..dcefedc 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -1,6 +1,5 @@
 menuconfig ISDN_DRV_GIGASET
 	tristate "Siemens Gigaset support"
-	depends on ISDN_I4L
 	select CRC_CCITT
 	select BITREVERSE
 	help
@@ -11,9 +10,33 @@
 	  If you have one of these devices, say M here and for at least
 	  one of the connection specific parts that follow.
 	  This will build a module called "gigaset".
+	  Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
+	  as a module, you have to build this driver as a module too,
+	  otherwise the Gigaset device won't show up as an ISDN device.
 
 if ISDN_DRV_GIGASET
 
+config GIGASET_CAPI
+	bool "Gigaset CAPI support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
+	default ISDN_I4L='n'
+	help
+	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
+	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
+	  subsystem you'll have to enable the capidrv glue driver.
+	  (select ISDN_CAPI_CAPIDRV.)
+	  Say N to build the old native ISDN4Linux variant.
+
+config GIGASET_I4L
+	bool
+	depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
+	default !GIGASET_CAPI
+
+config GIGASET_DUMMYLL
+	bool
+	default !GIGASET_CAPI&&!GIGASET_I4L
+
 config GIGASET_BASE
 	tristate "Gigaset base station support"
 	depends on USB
diff --git a/drivers/isdn/gigaset/Makefile b/drivers/isdn/gigaset/Makefile
index e9d3189..c453b72 100644
--- a/drivers/isdn/gigaset/Makefile
+++ b/drivers/isdn/gigaset/Makefile
@@ -1,4 +1,7 @@
-gigaset-y := common.o interface.o proc.o ev-layer.o i4l.o asyncdata.o
+gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
+gigaset-$(CONFIG_GIGASET_CAPI) += capi.o
+gigaset-$(CONFIG_GIGASET_I4L) += i4l.o
+gigaset-$(CONFIG_GIGASET_DUMMYLL) += dummyll.o
 usb_gigaset-y := usb-gigaset.o
 ser_gigaset-y := ser-gigaset.o
 bas_gigaset-y := bas-gigaset.o isocdata.o
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index 44a58e6..ccb2a7b 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -19,7 +19,7 @@
 
 /* check if byte must be stuffed/escaped
  * I'm not sure which data should be encoded.
- * Therefore I will go the hard way and decode every value
+ * Therefore I will go the hard way and encode every value
  * less than 0x20, the flag sequence and the control escape char.
  */
 static inline int muststuff(unsigned char c)
@@ -35,303 +35,383 @@
 
 /* == data input =========================================================== */
 
-/* process a block of received bytes in command mode (modem response)
+/* process a block of received bytes in command mode
+ * (mstate != MS_LOCKED && (inputstate & INS_command))
+ * Append received bytes to the command response buffer and forward them
+ * line by line to the response handler. Exit whenever a mode/state change
+ * might have occurred.
  * Return value:
  *	number of processed bytes
  */
-static inline int cmd_loop(unsigned char c, unsigned char *src, int numbytes,
-			   struct inbuf_t *inbuf)
+static unsigned cmd_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
+	unsigned char *src = inbuf->data + inbuf->head;
 	struct cardstate *cs = inbuf->cs;
-	unsigned cbytes      = cs->cbytes;
-	int inputstate = inbuf->inputstate;
-	int startbytes = numbytes;
+	unsigned cbytes = cs->cbytes;
+	unsigned procbytes = 0;
+	unsigned char c;
 
-	for (;;) {
-		cs->respdata[cbytes] = c;
-		if (c == 10 || c == 13) {
-			gig_dbg(DEBUG_TRANSCMD, "%s: End of Command (%d Bytes)",
-				__func__, cbytes);
-			cs->cbytes = cbytes;
-			gigaset_handle_modem_response(cs); /* can change
-							      cs->dle */
-			cbytes = 0;
+	while (procbytes < numbytes) {
+		c = *src++;
+		procbytes++;
 
-			if (cs->dle &&
-			    !(inputstate & INS_DLE_command)) {
-				inputstate &= ~INS_command;
+		switch (c) {
+		case '\n':
+			if (cbytes == 0 && cs->respdata[0] == '\r') {
+				/* collapse LF with preceding CR */
+				cs->respdata[0] = 0;
 				break;
 			}
-		} else {
-			/* advance in line buffer, checking for overflow */
-			if (cbytes < MAX_RESP_SIZE - 1)
-				cbytes++;
-			else
-				dev_warn(cs->dev, "response too large\n");
-		}
+			/* --v-- fall through --v-- */
+		case '\r':
+			/* end of message line, pass to response handler */
+			gig_dbg(DEBUG_TRANSCMD, "%s: End of Message (%d Bytes)",
+				__func__, cbytes);
+			if (cbytes >= MAX_RESP_SIZE) {
+				dev_warn(cs->dev, "response too large (%d)\n",
+					 cbytes);
+				cbytes = MAX_RESP_SIZE;
+			}
+			cs->cbytes = cbytes;
+			gigaset_handle_modem_response(cs);
+			cbytes = 0;
 
-		if (!numbytes)
-			break;
-		c = *src++;
-		--numbytes;
-		if (c == DLE_FLAG &&
-		    (cs->dle || inputstate & INS_DLE_command)) {
-			inputstate |= INS_DLE_char;
-			break;
+			/* store EOL byte for CRLF collapsing */
+			cs->respdata[0] = c;
+
+			/* cs->dle may have changed */
+			if (cs->dle && !(inbuf->inputstate & INS_DLE_command))
+				inbuf->inputstate &= ~INS_command;
+
+			/* return for reevaluating state */
+			goto exit;
+
+		case DLE_FLAG:
+			if (inbuf->inputstate & INS_DLE_char) {
+				/* quoted DLE: clear quote flag */
+				inbuf->inputstate &= ~INS_DLE_char;
+			} else if (cs->dle ||
+				   (inbuf->inputstate & INS_DLE_command)) {
+				/* DLE escape, pass up for handling */
+				inbuf->inputstate |= INS_DLE_char;
+				goto exit;
+			}
+			/* quoted or not in DLE mode: treat as regular data */
+			/* --v-- fall through --v-- */
+		default:
+			/* append to line buffer if possible */
+			if (cbytes < MAX_RESP_SIZE)
+				cs->respdata[cbytes] = c;
+			cbytes++;
 		}
 	}
-
+exit:
 	cs->cbytes = cbytes;
-	inbuf->inputstate = inputstate;
-
-	return startbytes - numbytes;
+	return procbytes;
 }
 
-/* process a block of received bytes in lock mode (tty i/f)
+/* process a block of received bytes in lock mode
+ * All received bytes are passed unmodified to the tty i/f.
  * Return value:
  *	number of processed bytes
  */
-static inline int lock_loop(unsigned char *src, int numbytes,
-			    struct inbuf_t *inbuf)
+static unsigned lock_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
-	struct cardstate *cs = inbuf->cs;
+	unsigned char *src = inbuf->data + inbuf->head;
 
-	gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response",
-			   numbytes, src);
-	gigaset_if_receive(cs, src, numbytes);
-
+	gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response", numbytes, src);
+	gigaset_if_receive(inbuf->cs, src, numbytes);
 	return numbytes;
 }
 
+/* set up next receive skb for data mode
+ */
+static void new_rcv_skb(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	unsigned short hw_hdr_len = cs->hw_hdr_len;
+
+	if (bcs->ignore) {
+		bcs->skb = NULL;
+		return;
+	}
+
+	bcs->skb = dev_alloc_skb(SBUFSIZE + hw_hdr_len);
+	if (bcs->skb == NULL) {
+		dev_warn(cs->dev, "could not allocate new skb\n");
+		return;
+	}
+	skb_reserve(bcs->skb, hw_hdr_len);
+}
+
 /* process a block of received bytes in HDLC data mode
+ * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC)
  * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
  * When a frame is complete, check the FCS and pass valid frames to the LL.
  * If DLE is encountered, return immediately to let the caller handle it.
  * Return value:
  *	number of processed bytes
- *	numbytes (all bytes processed) on error --FIXME
  */
-static inline int hdlc_loop(unsigned char c, unsigned char *src, int numbytes,
-			    struct inbuf_t *inbuf)
+static unsigned hdlc_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
 	struct cardstate *cs = inbuf->cs;
-	struct bc_state *bcs = inbuf->bcs;
+	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
 	__u16 fcs = bcs->fcs;
 	struct sk_buff *skb = bcs->skb;
-	unsigned char error;
-	struct sk_buff *compskb;
-	int startbytes = numbytes;
-	int l;
+	unsigned char *src = inbuf->data + inbuf->head;
+	unsigned procbytes = 0;
+	unsigned char c;
 
-	if (unlikely(inputstate & INS_byte_stuff)) {
+	if (inputstate & INS_byte_stuff) {
+		if (!numbytes)
+			return 0;
 		inputstate &= ~INS_byte_stuff;
 		goto byte_stuff;
 	}
-	for (;;) {
-		if (unlikely(c == PPP_ESCAPE)) {
-			if (unlikely(!numbytes)) {
-				inputstate |= INS_byte_stuff;
+
+	while (procbytes < numbytes) {
+		c = *src++;
+		procbytes++;
+		if (c == DLE_FLAG) {
+			if (inputstate & INS_DLE_char) {
+				/* quoted DLE: clear quote flag */
+				inputstate &= ~INS_DLE_char;
+			} else if (cs->dle || (inputstate & INS_DLE_command)) {
+				/* DLE escape, pass up for handling */
+				inputstate |= INS_DLE_char;
 				break;
 			}
-			c = *src++;
-			--numbytes;
-			if (unlikely(c == DLE_FLAG &&
-				     (cs->dle ||
-				      inbuf->inputstate & INS_DLE_command))) {
-				inbuf->inputstate |= INS_DLE_char;
+		}
+
+		if (c == PPP_ESCAPE) {
+			/* byte stuffing indicator: pull in next byte */
+			if (procbytes >= numbytes) {
+				/* end of buffer, save for later processing */
 				inputstate |= INS_byte_stuff;
 				break;
 			}
 byte_stuff:
+			c = *src++;
+			procbytes++;
+			if (c == DLE_FLAG) {
+				if (inputstate & INS_DLE_char) {
+					/* quoted DLE: clear quote flag */
+					inputstate &= ~INS_DLE_char;
+				} else if (cs->dle ||
+					   (inputstate & INS_DLE_command)) {
+					/* DLE escape, pass up for handling */
+					inputstate |=
+						INS_DLE_char | INS_byte_stuff;
+					break;
+				}
+			}
 			c ^= PPP_TRANS;
-			if (unlikely(!muststuff(c)))
+#ifdef CONFIG_GIGASET_DEBUG
+			if (!muststuff(c))
 				gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c);
-		} else if (unlikely(c == PPP_FLAG)) {
-			if (unlikely(inputstate & INS_skip_frame)) {
-#ifdef CONFIG_GIGASET_DEBUG
-				if (!(inputstate & INS_have_data)) { /* 7E 7E */
-					++bcs->emptycount;
-				} else
-					gig_dbg(DEBUG_HDLC,
-					    "7e----------------------------");
 #endif
-
-				/* end of frame */
-				error = 1;
-				gigaset_rcv_error(NULL, cs, bcs);
-			} else if (!(inputstate & INS_have_data)) { /* 7E 7E */
-#ifdef CONFIG_GIGASET_DEBUG
-				++bcs->emptycount;
-#endif
-				break;
-			} else {
+		} else if (c == PPP_FLAG) {
+			/* end of frame: process content if any */
+			if (inputstate & INS_have_data) {
 				gig_dbg(DEBUG_HDLC,
 					"7e----------------------------");
 
-				/* end of frame */
-				error = 0;
-
-				if (unlikely(fcs != PPP_GOODFCS)) {
+				/* check and pass received frame */
+				if (!skb) {
+					/* skipped frame */
+					gigaset_isdn_rcv_err(bcs);
+				} else if (skb->len < 2) {
+					/* frame too short for FCS */
+					dev_warn(cs->dev,
+						 "short frame (%d)\n",
+						 skb->len);
+					gigaset_isdn_rcv_err(bcs);
+					dev_kfree_skb_any(skb);
+				} else if (fcs != PPP_GOODFCS) {
+					/* frame check error */
 					dev_err(cs->dev,
 				"Checksum failed, %u bytes corrupted!\n",
 						skb->len);
-					compskb = NULL;
-					gigaset_rcv_error(compskb, cs, bcs);
-					error = 1;
+					gigaset_isdn_rcv_err(bcs);
+					dev_kfree_skb_any(skb);
 				} else {
-					if (likely((l = skb->len) > 2)) {
-						skb->tail -= 2;
-						skb->len -= 2;
-					} else {
-						dev_kfree_skb(skb);
-						skb = NULL;
-						inputstate |= INS_skip_frame;
-						if (l == 1) {
-							dev_err(cs->dev,
-						  "invalid packet size (1)!\n");
-							error = 1;
-							gigaset_rcv_error(NULL,
-								cs, bcs);
-						}
-					}
-					if (likely(!(error ||
-						     (inputstate &
-						      INS_skip_frame)))) {
-						gigaset_rcv_skb(skb, cs, bcs);
-					}
+					/* good frame */
+					__skb_trim(skb, skb->len - 2);
+					gigaset_skb_rcvd(bcs, skb);
+				}
+
+				/* prepare reception of next frame */
+				inputstate &= ~INS_have_data;
+				new_rcv_skb(bcs);
+				skb = bcs->skb;
+			} else {
+				/* empty frame (7E 7E) */
+#ifdef CONFIG_GIGASET_DEBUG
+				++bcs->emptycount;
+#endif
+				if (!skb) {
+					/* skipped (?) */
+					gigaset_isdn_rcv_err(bcs);
+					new_rcv_skb(bcs);
+					skb = bcs->skb;
 				}
 			}
 
-			if (unlikely(error))
-				if (skb)
-					dev_kfree_skb(skb);
-
 			fcs = PPP_INITFCS;
-			inputstate &= ~(INS_have_data | INS_skip_frame);
-			if (unlikely(bcs->ignore)) {
-				inputstate |= INS_skip_frame;
-				skb = NULL;
-			} else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)) {
-				skb_reserve(skb, HW_HDR_LEN);
-			} else {
-				dev_warn(cs->dev,
-					 "could not allocate new skb\n");
-				inputstate |= INS_skip_frame;
-			}
-
-			break;
-		} else if (unlikely(muststuff(c))) {
+			continue;
+#ifdef CONFIG_GIGASET_DEBUG
+		} else if (muststuff(c)) {
 			/* Should not happen. Possible after ZDLE=1<CR><LF>. */
 			gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c);
+#endif
 		}
 
-		/* add character */
-
+		/* regular data byte, append to skb */
 #ifdef CONFIG_GIGASET_DEBUG
-		if (unlikely(!(inputstate & INS_have_data))) {
+		if (!(inputstate & INS_have_data)) {
 			gig_dbg(DEBUG_HDLC, "7e (%d x) ================",
 				bcs->emptycount);
 			bcs->emptycount = 0;
 		}
 #endif
-
 		inputstate |= INS_have_data;
-
-		if (likely(!(inputstate & INS_skip_frame))) {
-			if (unlikely(skb->len == SBUFSIZE)) {
+		if (skb) {
+			if (skb->len == SBUFSIZE) {
 				dev_warn(cs->dev, "received packet too long\n");
 				dev_kfree_skb_any(skb);
-				skb = NULL;
-				inputstate |= INS_skip_frame;
-				break;
+				/* skip remainder of packet */
+				bcs->skb = skb = NULL;
+			} else {
+				*__skb_put(skb, 1) = c;
+				fcs = crc_ccitt_byte(fcs, c);
 			}
-			*__skb_put(skb, 1) = c;
-			fcs = crc_ccitt_byte(fcs, c);
-		}
-
-		if (unlikely(!numbytes))
-			break;
-		c = *src++;
-		--numbytes;
-		if (unlikely(c == DLE_FLAG &&
-			     (cs->dle ||
-			      inbuf->inputstate & INS_DLE_command))) {
-			inbuf->inputstate |= INS_DLE_char;
-			break;
 		}
 	}
+
 	bcs->inputstate = inputstate;
 	bcs->fcs = fcs;
-	bcs->skb = skb;
-	return startbytes - numbytes;
+	return procbytes;
 }
 
 /* process a block of received bytes in transparent data mode
+ * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 != L2_HDLC)
  * Invert bytes, undoing byte stuffing and watching for DLE escapes.
  * If DLE is encountered, return immediately to let the caller handle it.
  * Return value:
  *	number of processed bytes
- *	numbytes (all bytes processed) on error --FIXME
  */
-static inline int iraw_loop(unsigned char c, unsigned char *src, int numbytes,
-			    struct inbuf_t *inbuf)
+static unsigned iraw_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
 	struct cardstate *cs = inbuf->cs;
-	struct bc_state *bcs = inbuf->bcs;
+	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
 	struct sk_buff *skb = bcs->skb;
-	int startbytes = numbytes;
+	unsigned char *src = inbuf->data + inbuf->head;
+	unsigned procbytes = 0;
+	unsigned char c;
 
-	for (;;) {
-		/* add character */
-		inputstate |= INS_have_data;
+	if (!skb) {
+		/* skip this block */
+		new_rcv_skb(bcs);
+		return numbytes;
+	}
 
-		if (likely(!(inputstate & INS_skip_frame))) {
-			if (unlikely(skb->len == SBUFSIZE)) {
-				//FIXME just pass skb up and allocate a new one
-				dev_warn(cs->dev, "received packet too long\n");
-				dev_kfree_skb_any(skb);
-				skb = NULL;
-				inputstate |= INS_skip_frame;
+	while (procbytes < numbytes && skb->len < SBUFSIZE) {
+		c = *src++;
+		procbytes++;
+
+		if (c == DLE_FLAG) {
+			if (inputstate & INS_DLE_char) {
+				/* quoted DLE: clear quote flag */
+				inputstate &= ~INS_DLE_char;
+			} else if (cs->dle || (inputstate & INS_DLE_command)) {
+				/* DLE escape, pass up for handling */
+				inputstate |= INS_DLE_char;
 				break;
 			}
-			*__skb_put(skb, 1) = bitrev8(c);
 		}
 
-		if (unlikely(!numbytes))
-			break;
-		c = *src++;
-		--numbytes;
-		if (unlikely(c == DLE_FLAG &&
-			     (cs->dle ||
-			      inbuf->inputstate & INS_DLE_command))) {
-			inbuf->inputstate |= INS_DLE_char;
-			break;
-		}
+		/* regular data byte: append to current skb */
+		inputstate |= INS_have_data;
+		*__skb_put(skb, 1) = bitrev8(c);
 	}
 
 	/* pass data up */
-	if (likely(inputstate & INS_have_data)) {
-		if (likely(!(inputstate & INS_skip_frame))) {
-			gigaset_rcv_skb(skb, cs, bcs);
-		}
-		inputstate &= ~(INS_have_data | INS_skip_frame);
-		if (unlikely(bcs->ignore)) {
-			inputstate |= INS_skip_frame;
-			skb = NULL;
-		} else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN))
-				  != NULL)) {
-			skb_reserve(skb, HW_HDR_LEN);
-		} else {
-			dev_warn(cs->dev, "could not allocate new skb\n");
-			inputstate |= INS_skip_frame;
-		}
+	if (inputstate & INS_have_data) {
+		gigaset_skb_rcvd(bcs, skb);
+		inputstate &= ~INS_have_data;
+		new_rcv_skb(bcs);
 	}
 
 	bcs->inputstate = inputstate;
-	bcs->skb = skb;
-	return startbytes - numbytes;
+	return procbytes;
+}
+
+/* process DLE escapes
+ * Called whenever a DLE sequence might be encountered in the input stream.
+ * Either processes the entire DLE sequence or, if that isn't possible,
+ * notes the fact that an initial DLE has been received in the INS_DLE_char
+ * inputstate flag and resumes processing of the sequence on the next call.
+ */
+static void handle_dle(struct inbuf_t *inbuf)
+{
+	struct cardstate *cs = inbuf->cs;
+
+	if (cs->mstate == MS_LOCKED)
+		return;		/* no DLE processing in lock mode */
+
+	if (!(inbuf->inputstate & INS_DLE_char)) {
+		/* no DLE pending */
+		if (inbuf->data[inbuf->head] == DLE_FLAG &&
+		    (cs->dle || inbuf->inputstate & INS_DLE_command)) {
+			/* start of DLE sequence */
+			inbuf->head++;
+			if (inbuf->head == inbuf->tail ||
+			    inbuf->head == RBUFSIZE) {
+				/* end of buffer, save for later processing */
+				inbuf->inputstate |= INS_DLE_char;
+				return;
+			}
+		} else {
+			/* regular data byte */
+			return;
+		}
+	}
+
+	/* consume pending DLE */
+	inbuf->inputstate &= ~INS_DLE_char;
+
+	switch (inbuf->data[inbuf->head]) {
+	case 'X':	/* begin of event message */
+		if (inbuf->inputstate & INS_command)
+			dev_notice(cs->dev,
+				   "received <DLE>X in command mode\n");
+		inbuf->inputstate |= INS_command | INS_DLE_command;
+		inbuf->head++;	/* byte consumed */
+		break;
+	case '.':	/* end of event message */
+		if (!(inbuf->inputstate & INS_DLE_command))
+			dev_notice(cs->dev,
+				   "received <DLE>. without <DLE>X\n");
+		inbuf->inputstate &= ~INS_DLE_command;
+		/* return to data mode if in DLE mode */
+		if (cs->dle)
+			inbuf->inputstate &= ~INS_command;
+		inbuf->head++;	/* byte consumed */
+		break;
+	case DLE_FLAG:	/* DLE in data stream */
+		/* mark as quoted */
+		inbuf->inputstate |= INS_DLE_char;
+		if (!(cs->dle || inbuf->inputstate & INS_DLE_command))
+			dev_notice(cs->dev,
+				   "received <DLE><DLE> not in DLE mode\n");
+		break;	/* quoted byte left in buffer */
+	default:
+		dev_notice(cs->dev, "received <DLE><%02x>\n",
+			   inbuf->data[inbuf->head]);
+		/* quoted byte left in buffer */
+	}
 }
 
 /**
@@ -345,94 +425,39 @@
  */
 void gigaset_m10x_input(struct inbuf_t *inbuf)
 {
-	struct cardstate *cs;
-	unsigned tail, head, numbytes;
-	unsigned char *src, c;
-	int procbytes;
+	struct cardstate *cs = inbuf->cs;
+	unsigned numbytes, procbytes;
 
-	head = inbuf->head;
-	tail = inbuf->tail;
-	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail);
+	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", inbuf->head, inbuf->tail);
 
-	if (head != tail) {
-		cs = inbuf->cs;
-		src = inbuf->data + head;
-		numbytes = (head > tail ? RBUFSIZE : tail) - head;
+	while (inbuf->head != inbuf->tail) {
+		/* check for DLE escape */
+		handle_dle(inbuf);
+
+		/* process a contiguous block of bytes */
+		numbytes = (inbuf->head > inbuf->tail ?
+			    RBUFSIZE : inbuf->tail) - inbuf->head;
 		gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes);
+		/*
+		 * numbytes may be 0 if handle_dle() ate the last byte.
+		 * This does no harm, *_loop() will just return 0 immediately.
+		 */
 
-		while (numbytes) {
-			if (cs->mstate == MS_LOCKED) {
-				procbytes = lock_loop(src, numbytes, inbuf);
-				src += procbytes;
-				numbytes -= procbytes;
-			} else {
-				c = *src++;
-				--numbytes;
-				if (c == DLE_FLAG && (cs->dle ||
-				    inbuf->inputstate & INS_DLE_command)) {
-					if (!(inbuf->inputstate & INS_DLE_char)) {
-						inbuf->inputstate |= INS_DLE_char;
-						goto nextbyte;
-					}
-					/* <DLE> <DLE> => <DLE> in data stream */
-					inbuf->inputstate &= ~INS_DLE_char;
-				}
+		if (cs->mstate == MS_LOCKED)
+			procbytes = lock_loop(numbytes, inbuf);
+		else if (inbuf->inputstate & INS_command)
+			procbytes = cmd_loop(numbytes, inbuf);
+		else if (cs->bcs->proto2 == L2_HDLC)
+			procbytes = hdlc_loop(numbytes, inbuf);
+		else
+			procbytes = iraw_loop(numbytes, inbuf);
+		inbuf->head += procbytes;
 
-				if (!(inbuf->inputstate & INS_DLE_char)) {
+		/* check for buffer wraparound */
+		if (inbuf->head >= RBUFSIZE)
+			inbuf->head = 0;
 
-					/* FIXME use function pointers?  */
-					if (inbuf->inputstate & INS_command)
-						procbytes = cmd_loop(c, src, numbytes, inbuf);
-					else if (inbuf->bcs->proto2 == ISDN_PROTO_L2_HDLC)
-						procbytes = hdlc_loop(c, src, numbytes, inbuf);
-					else
-						procbytes = iraw_loop(c, src, numbytes, inbuf);
-
-					src += procbytes;
-					numbytes -= procbytes;
-				} else {  /* DLE char */
-					inbuf->inputstate &= ~INS_DLE_char;
-					switch (c) {
-					case 'X': /*begin of command*/
-						if (inbuf->inputstate & INS_command)
-							dev_warn(cs->dev,
-					"received <DLE> 'X' in command mode\n");
-						inbuf->inputstate |=
-							INS_command | INS_DLE_command;
-						break;
-					case '.': /*end of command*/
-						if (!(inbuf->inputstate & INS_command))
-							dev_warn(cs->dev,
-					"received <DLE> '.' in hdlc mode\n");
-						inbuf->inputstate &= cs->dle ?
-							~(INS_DLE_command|INS_command)
-							: ~INS_DLE_command;
-						break;
-					//case DLE_FLAG: /*DLE_FLAG in data stream*/ /* schon oben behandelt! */
-					default:
-						dev_err(cs->dev,
-						      "received 0x10 0x%02x!\n",
-							(int) c);
-						/* FIXME: reset driver?? */
-					}
-				}
-			}
-nextbyte:
-			if (!numbytes) {
-				/* end of buffer, check for wrap */
-				if (head > tail) {
-					head = 0;
-					src = inbuf->data;
-					numbytes = tail;
-				} else {
-					head = tail;
-					break;
-				}
-			}
-		}
-
-		gig_dbg(DEBUG_INTR, "setting head to %u", head);
-		inbuf->head = head;
+		gig_dbg(DEBUG_INTR, "head set to %u", inbuf->head);
 	}
 }
 EXPORT_SYMBOL_GPL(gigaset_m10x_input);
@@ -440,16 +465,16 @@
 
 /* == data output ========================================================== */
 
-/* Encoding of a PPP packet into an octet stuffed HDLC frame
- * with FCS, opening and closing flags.
+/*
+ * Encode a data packet into an octet stuffed HDLC frame with FCS,
+ * opening and closing flags, preserving headroom data.
  * parameters:
- *	skb	skb containing original packet (freed upon return)
- *	head	number of headroom bytes to allocate in result skb
- *	tail	number of tailroom bytes to allocate in result skb
+ *	skb		skb containing original packet (freed upon return)
  * Return value:
  *	pointer to newly allocated skb containing the result frame
+ *	and the original link layer header, NULL on error
  */
-static struct sk_buff *HDLC_Encode(struct sk_buff *skb, int head, int tail)
+static struct sk_buff *HDLC_Encode(struct sk_buff *skb)
 {
 	struct sk_buff *hdlc_skb;
 	__u16 fcs;
@@ -471,16 +496,19 @@
 
 	/* size of new buffer: original size + number of stuffing bytes
 	 * + 2 bytes FCS + 2 stuffing bytes for FCS (if needed) + 2 flag bytes
+	 * + room for link layer header
 	 */
-	hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + tail + head);
+	hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + skb->mac_len);
 	if (!hdlc_skb) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NULL;
 	}
-	skb_reserve(hdlc_skb, head);
 
-	/* Copy acknowledge request into new skb */
-	memcpy(hdlc_skb->head, skb->head, 2);
+	/* Copy link layer header into new skb */
+	skb_reset_mac_header(hdlc_skb);
+	skb_reserve(hdlc_skb, skb->mac_len);
+	memcpy(skb_mac_header(hdlc_skb), skb_mac_header(skb), skb->mac_len);
+	hdlc_skb->mac_len = skb->mac_len;
 
 	/* Add flag sequence in front of everything.. */
 	*(skb_put(hdlc_skb, 1)) = PPP_FLAG;
@@ -511,33 +539,42 @@
 
 	*(skb_put(hdlc_skb, 1)) = PPP_FLAG;
 
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return hdlc_skb;
 }
 
-/* Encoding of a raw packet into an octet stuffed bit inverted frame
+/*
+ * Encode a data packet into an octet stuffed raw bit inverted frame,
+ * preserving headroom data.
  * parameters:
- *	skb	skb containing original packet (freed upon return)
- *	head	number of headroom bytes to allocate in result skb
- *	tail	number of tailroom bytes to allocate in result skb
+ *	skb		skb containing original packet (freed upon return)
  * Return value:
  *	pointer to newly allocated skb containing the result frame
+ *	and the original link layer header, NULL on error
  */
-static struct sk_buff *iraw_encode(struct sk_buff *skb, int head, int tail)
+static struct sk_buff *iraw_encode(struct sk_buff *skb)
 {
 	struct sk_buff *iraw_skb;
 	unsigned char c;
 	unsigned char *cp;
 	int len;
 
-	/* worst case: every byte must be stuffed */
-	iraw_skb = dev_alloc_skb(2*skb->len + tail + head);
+	/* size of new buffer (worst case = every byte must be stuffed):
+	 * 2 * original size + room for link layer header
+	 */
+	iraw_skb = dev_alloc_skb(2*skb->len + skb->mac_len);
 	if (!iraw_skb) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NULL;
 	}
-	skb_reserve(iraw_skb, head);
 
+	/* copy link layer header into new skb */
+	skb_reset_mac_header(iraw_skb);
+	skb_reserve(iraw_skb, skb->mac_len);
+	memcpy(skb_mac_header(iraw_skb), skb_mac_header(skb), skb->mac_len);
+	iraw_skb->mac_len = skb->mac_len;
+
+	/* copy and stuff data */
 	cp = skb->data;
 	len = skb->len;
 	while (len--) {
@@ -546,7 +583,7 @@
 			*(skb_put(iraw_skb, 1)) = c;
 		*(skb_put(iraw_skb, 1)) = c;
 	}
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return iraw_skb;
 }
 
@@ -555,8 +592,10 @@
  * @bcs:	B channel descriptor structure.
  * @skb:	data to send.
  *
- * Called by i4l.c to encode and queue an skb for sending, and start
+ * Called by LL to encode and queue an skb for sending, and start
  * transmission if necessary.
+ * Once the payload data has been transmitted completely, gigaset_skb_sent()
+ * will be called with the skb's link layer header preserved.
  *
  * Return value:
  *	number of bytes accepted for sending (skb->len) if ok,
@@ -564,24 +603,25 @@
  */
 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 {
+	struct cardstate *cs = bcs->cs;
 	unsigned len = skb->len;
 	unsigned long flags;
 
-	if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
-		skb = HDLC_Encode(skb, HW_HDR_LEN, 0);
+	if (bcs->proto2 == L2_HDLC)
+		skb = HDLC_Encode(skb);
 	else
-		skb = iraw_encode(skb, HW_HDR_LEN, 0);
+		skb = iraw_encode(skb);
 	if (!skb) {
-		dev_err(bcs->cs->dev,
+		dev_err(cs->dev,
 			"unable to allocate memory for encoding!\n");
 		return -ENOMEM;
 	}
 
 	skb_queue_tail(&bcs->squeue, skb);
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (bcs->cs->connected)
-		tasklet_schedule(&bcs->cs->write_tasklet);
-	spin_unlock_irqrestore(&bcs->cs->lock, flags);
+	spin_lock_irqsave(&cs->lock, flags);
+	if (cs->connected)
+		tasklet_schedule(&cs->write_tasklet);
+	spin_unlock_irqrestore(&cs->lock, flags);
 
 	return len;	/* ok so far */
 }
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 5ed1d99..95ebc51 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -57,7 +57,7 @@
 #define USB_SX353_PRODUCT_ID    0x0022
 
 /* table of devices that work with this driver */
-static const struct usb_device_id gigaset_table [] = {
+static const struct usb_device_id gigaset_table[] = {
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
@@ -137,7 +137,7 @@
 #define BS_RESETTING	0x200	/* waiting for HD_RESET_INTERRUPT_PIPE_ACK */
 
 
-static struct gigaset_driver *driver = NULL;
+static struct gigaset_driver *driver;
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver gigaset_usb_driver = {
@@ -601,11 +601,12 @@
 	ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size);
 	usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev,
 			     usb_rcvctrlpipe(ucs->udev, 0),
-			     (unsigned char*) & ucs->dr_cmd_in,
+			     (unsigned char *) &ucs->dr_cmd_in,
 			     ucs->rcvbuf, ucs->rcvbuf_size,
 			     read_ctrl_callback, cs->inbuf);
 
-	if ((ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC)) != 0) {
+	ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC);
+	if (ret != 0) {
 		update_basstate(ucs, 0, BS_ATRDPEND);
 		dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
 			get_usb_rcmsg(ret));
@@ -652,13 +653,11 @@
 		return;
 	case -ENODEV:			/* device removed */
 	case -ESHUTDOWN:		/* device shut down */
-		//FIXME use this as disconnect indicator?
 		gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__);
 		return;
 	default:		/* severe trouble */
 		dev_warn(cs->dev, "interrupt read: %s\n",
 			 get_usb_statmsg(status));
-		//FIXME corrective action? resubmission always ok?
 		goto resubmit;
 	}
 
@@ -742,7 +741,8 @@
 			kfree(ucs->rcvbuf);
 			ucs->rcvbuf_size = 0;
 		}
-		if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
+		ucs->rcvbuf = kmalloc(l, GFP_ATOMIC);
+		if (ucs->rcvbuf == NULL) {
 			spin_unlock_irqrestore(&cs->lock, flags);
 			dev_err(cs->dev, "out of memory receiving AT data\n");
 			error_reset(cs);
@@ -750,12 +750,12 @@
 		}
 		ucs->rcvbuf_size = l;
 		ucs->retry_cmd_in = 0;
-		if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) {
+		rc = atread_submit(cs, BAS_TIMEOUT);
+		if (rc < 0) {
 			kfree(ucs->rcvbuf);
 			ucs->rcvbuf = NULL;
 			ucs->rcvbuf_size = 0;
 			if (rc != -ENODEV) {
-				//FIXME corrective action?
 				spin_unlock_irqrestore(&cs->lock, flags);
 				error_reset(cs);
 				break;
@@ -911,7 +911,7 @@
 	int rc;
 
 	/* initialize L2 reception */
-	if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
+	if (bcs->proto2 == L2_HDLC)
 		bcs->inputstate |= INS_flag_hunt;
 
 	/* submit all isochronous input URBs */
@@ -940,7 +940,8 @@
 		}
 
 		dump_urb(DEBUG_ISO, "Initial isoc read", urb);
-		if ((rc = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
+		rc = usb_submit_urb(urb, GFP_ATOMIC);
+		if (rc != 0)
 			goto error;
 	}
 
@@ -1045,7 +1046,8 @@
 
 		/* compute frame length according to flow control */
 		ifd->length = BAS_NORMFRAME;
-		if ((corrbytes = atomic_read(&ubc->corrbytes)) != 0) {
+		corrbytes = atomic_read(&ubc->corrbytes);
+		if (corrbytes != 0) {
 			gig_dbg(DEBUG_ISO, "%s: corrbytes=%d",
 				__func__, corrbytes);
 			if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME)
@@ -1064,7 +1066,7 @@
 					"%s: buffer busy at frame %d",
 					__func__, nframe);
 				/* tasklet will be restarted from
-				   gigaset_send_skb() */
+				   gigaset_isoc_send_skb() */
 			} else {
 				dev_err(ucx->bcs->cs->dev,
 					"%s: buffer error %d at frame %d\n",
@@ -1284,7 +1286,8 @@
 	for (;;) {
 		/* retrieve URB */
 		spin_lock_irqsave(&ubc->isoinlock, flags);
-		if (!(urb = ubc->isoindone)) {
+		urb = ubc->isoindone;
+		if (!urb) {
 			spin_unlock_irqrestore(&ubc->isoinlock, flags);
 			return;
 		}
@@ -1371,7 +1374,7 @@
 				 "isochronous read: %d data bytes missing\n",
 				 totleft);
 
-	error:
+error:
 		/* URB processed, resubmit */
 		for (frame = 0; frame < BAS_NUMFRAMES; frame++) {
 			urb->iso_frame_desc[frame].status = 0;
@@ -1568,7 +1571,7 @@
 	ucs->dr_ctrl.wLength = 0;
 	usb_fill_control_urb(ucs->urb_ctrl, ucs->udev,
 			     usb_sndctrlpipe(ucs->udev, 0),
-			     (unsigned char*) &ucs->dr_ctrl, NULL, 0,
+			     (unsigned char *) &ucs->dr_ctrl, NULL, 0,
 			     write_ctrl_callback, ucs);
 	ucs->retry_ctrl = 0;
 	ret = usb_submit_urb(ucs->urb_ctrl, GFP_ATOMIC);
@@ -1621,7 +1624,8 @@
 		return -EHOSTUNREACH;
 	}
 
-	if ((ret = starturbs(bcs)) < 0) {
+	ret = starturbs(bcs);
+	if (ret < 0) {
 		dev_err(cs->dev,
 			"could not start isochronous I/O for channel B%d: %s\n",
 			bcs->channel + 1,
@@ -1633,7 +1637,8 @@
 	}
 
 	req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
-	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
+	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
+	if (ret < 0) {
 		dev_err(cs->dev, "could not open channel B%d\n",
 			bcs->channel + 1);
 		stopurbs(bcs->hw.bas);
@@ -1677,7 +1682,8 @@
 
 	/* channel running: tell device to close it */
 	req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
-	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
+	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
+	if (ret < 0)
 		dev_err(cs->dev, "closing channel B%d failed\n",
 			bcs->channel + 1);
 
@@ -1703,10 +1709,12 @@
 	gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD,
 		"write_command: sent %u bytes, %u left",
 		cs->curlen, cs->cmdbytes);
-	if ((cs->cmdbuf = cb->next) != NULL) {
+	if (cb->next != NULL) {
+		cs->cmdbuf = cb->next;
 		cs->cmdbuf->prev = NULL;
 		cs->curlen = cs->cmdbuf->len;
 	} else {
+		cs->cmdbuf = NULL;
 		cs->lastcmdbuf = NULL;
 		cs->curlen = 0;
 	}
@@ -1833,7 +1841,7 @@
 	ucs->dr_cmd_out.wLength = cpu_to_le16(len);
 	usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev,
 			     usb_sndctrlpipe(ucs->udev, 0),
-			     (unsigned char*) &ucs->dr_cmd_out, buf, len,
+			     (unsigned char *) &ucs->dr_cmd_out, buf, len,
 			     write_command_callback, cs);
 	rc = usb_submit_urb(ucs->urb_cmd_out, GFP_ATOMIC);
 	if (unlikely(rc)) {
@@ -1953,7 +1961,8 @@
 
 	if (len > IF_WRITEBUF)
 		len = IF_WRITEBUF;
-	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+	cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
+	if (!cb) {
 		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		rc = -ENOMEM;
 		goto notqueued;
@@ -2100,14 +2109,15 @@
 	}
 	ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL;
 	ubc->numsub = 0;
-	if (!(ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL))) {
+	ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL);
+	if (!ubc->isooutbuf) {
 		pr_err("out of memory\n");
 		kfree(ubc);
 		bcs->hw.bas = NULL;
 		return 0;
 	}
 	tasklet_init(&ubc->sent_tasklet,
-		     &write_iso_tasklet, (unsigned long) bcs);
+		     write_iso_tasklet, (unsigned long) bcs);
 
 	spin_lock_init(&ubc->isoinlock);
 	for (i = 0; i < BAS_INURBS; ++i)
@@ -2128,7 +2138,7 @@
 	ubc->shared0s = 0;
 	ubc->stolen0s = 0;
 	tasklet_init(&ubc->rcvd_tasklet,
-		     &read_iso_tasklet, (unsigned long) bcs);
+		     read_iso_tasklet, (unsigned long) bcs);
 	return 1;
 }
 
@@ -2252,7 +2262,8 @@
 		gig_dbg(DEBUG_ANY,
 			"%s: wrong alternate setting %d - trying to switch",
 			__func__, hostif->desc.bAlternateSetting);
-		if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3) < 0) {
+		if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3)
+		    < 0) {
 			dev_warn(&udev->dev, "usb_set_interface failed, "
 				 "device %d interface %d altsetting %d\n",
 				 udev->devnum, hostif->desc.bInterfaceNumber,
@@ -2321,14 +2332,16 @@
 					(endpoint->bEndpointAddress) & 0x0f),
 			 ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
 			 endpoint->bInterval);
-	if ((rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL)) != 0) {
+	rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
+	if (rc != 0) {
 		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
 			get_usb_rcmsg(rc));
 		goto error;
 	}
 
 	/* tell the device that the driver is ready */
-	if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
+	rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0);
+	if (rc != 0)
 		goto error;
 
 	/* tell common part that the device is ready */
@@ -2524,9 +2537,10 @@
 	int result;
 
 	/* allocate memory for our driver state and intialize it */
-	if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				       GIGASET_MODULENAME, GIGASET_DEVNAME,
-				       &gigops, THIS_MODULE)) == NULL)
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+				    GIGASET_MODULENAME, GIGASET_DEVNAME,
+				    &gigops, THIS_MODULE);
+	if (driver == NULL)
 		goto error;
 
 	/* register this driver with the USB subsystem */
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
new file mode 100644
index 0000000..3f5cd06
--- /dev/null
+++ b/drivers/isdn/gigaset/capi.c
@@ -0,0 +1,2292 @@
+/*
+ * Kernel CAPI interface for the Gigaset driver
+ *
+ * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
+ *
+ * =====================================================================
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+#include <linux/ctype.h>
+#include <linux/isdn/capilli.h>
+#include <linux/isdn/capicmd.h>
+#include <linux/isdn/capiutil.h>
+
+/* missing from kernelcapi.h */
+#define CapiNcpiNotSupportedByProtocol	0x0001
+#define CapiFlagsNotSupportedByProtocol	0x0002
+#define CapiAlertAlreadySent		0x0003
+#define CapiFacilitySpecificFunctionNotSupported	0x3011
+
+/* missing from capicmd.h */
+#define CAPI_CONNECT_IND_BASELEN	(CAPI_MSG_BASELEN+4+2+8*1)
+#define CAPI_CONNECT_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN+4+3*1)
+#define CAPI_CONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN+4+1)
+#define CAPI_CONNECT_B3_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN+4+1)
+#define CAPI_DATA_B3_REQ_LEN64		(CAPI_MSG_BASELEN+4+4+2+2+2+8)
+#define CAPI_DATA_B3_CONF_LEN		(CAPI_MSG_BASELEN+4+2+2)
+#define CAPI_DISCONNECT_IND_LEN		(CAPI_MSG_BASELEN+4+2)
+#define CAPI_DISCONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN+4+2+1)
+#define CAPI_FACILITY_CONF_BASELEN	(CAPI_MSG_BASELEN+4+2+2+1)
+/* most _CONF messages contain only Controller/PLCI/NCCI and Info parameters */
+#define CAPI_STDCONF_LEN		(CAPI_MSG_BASELEN+4+2)
+
+#define CAPI_FACILITY_HANDSET	0x0000
+#define CAPI_FACILITY_DTMF	0x0001
+#define CAPI_FACILITY_V42BIS	0x0002
+#define CAPI_FACILITY_SUPPSVC	0x0003
+#define CAPI_FACILITY_WAKEUP	0x0004
+#define CAPI_FACILITY_LI	0x0005
+
+#define CAPI_SUPPSVC_GETSUPPORTED	0x0000
+
+/* missing from capiutil.h */
+#define CAPIMSG_PLCI_PART(m)	CAPIMSG_U8(m, 9)
+#define CAPIMSG_NCCI_PART(m)	CAPIMSG_U16(m, 10)
+#define CAPIMSG_HANDLE_REQ(m)	CAPIMSG_U16(m, 18) /* DATA_B3_REQ/_IND only! */
+#define CAPIMSG_FLAGS(m)	CAPIMSG_U16(m, 20)
+#define CAPIMSG_SETCONTROLLER(m, contr)	capimsg_setu8(m, 8, contr)
+#define CAPIMSG_SETPLCI_PART(m, plci)	capimsg_setu8(m, 9, plci)
+#define CAPIMSG_SETNCCI_PART(m, ncci)	capimsg_setu16(m, 10, ncci)
+#define CAPIMSG_SETFLAGS(m, flags)	capimsg_setu16(m, 20, flags)
+
+/* parameters with differing location in DATA_B3_CONF/_RESP: */
+#define CAPIMSG_SETHANDLE_CONF(m, handle)	capimsg_setu16(m, 12, handle)
+#define	CAPIMSG_SETINFO_CONF(m, info)		capimsg_setu16(m, 14, info)
+
+/* Flags (DATA_B3_REQ/_IND) */
+#define CAPI_FLAGS_DELIVERY_CONFIRMATION	0x04
+#define CAPI_FLAGS_RESERVED			(~0x1f)
+
+/* buffer sizes */
+#define MAX_BC_OCTETS 11
+#define MAX_HLC_OCTETS 3
+#define MAX_NUMBER_DIGITS 20
+#define MAX_FMT_IE_LEN 20
+
+/* values for gigaset_capi_appl.connected */
+#define APCONN_NONE	0	/* inactive/listening */
+#define APCONN_SETUP	1	/* connecting */
+#define APCONN_ACTIVE	2	/* B channel up */
+
+/* registered application data structure */
+struct gigaset_capi_appl {
+	struct list_head ctrlist;
+	struct gigaset_capi_appl *bcnext;
+	u16 id;
+	u16 nextMessageNumber;
+	u32 listenInfoMask;
+	u32 listenCIPmask;
+	int connected;
+};
+
+/* CAPI specific controller data structure */
+struct gigaset_capi_ctr {
+	struct capi_ctr ctr;
+	struct list_head appls;
+	struct sk_buff_head sendqueue;
+	atomic_t sendqlen;
+	/* two _cmsg structures possibly used concurrently: */
+	_cmsg hcmsg;	/* for message composition triggered from hardware */
+	_cmsg acmsg;	/* for dissection of messages sent from application */
+	u8 bc_buf[MAX_BC_OCTETS+1];
+	u8 hlc_buf[MAX_HLC_OCTETS+1];
+	u8 cgpty_buf[MAX_NUMBER_DIGITS+3];
+	u8 cdpty_buf[MAX_NUMBER_DIGITS+2];
+};
+
+/* CIP Value table (from CAPI 2.0 standard, ch. 6.1) */
+static struct {
+	u8 *bc;
+	u8 *hlc;
+} cip2bchlc[] = {
+	[1] = { "8090A3", NULL },
+		/* Speech (A-law) */
+	[2] = { "8890", NULL },
+		/* Unrestricted digital information */
+	[3] = { "8990", NULL },
+		/* Restricted digital information */
+	[4] = { "9090A3", NULL },
+		/* 3,1 kHz audio (A-law) */
+	[5] = { "9190", NULL },
+		/* 7 kHz audio */
+	[6] = { "9890", NULL },
+		/* Video */
+	[7] = { "88C0C6E6", NULL },
+		/* Packet mode */
+	[8] = { "8890218F", NULL },
+		/* 56 kbit/s rate adaptation */
+	[9] = { "9190A5", NULL },
+		/* Unrestricted digital information with tones/announcements */
+	[16] = { "8090A3", "9181" },
+		/* Telephony */
+	[17] = { "9090A3", "9184" },
+		/* Group 2/3 facsimile */
+	[18] = { "8890", "91A1" },
+		/* Group 4 facsimile Class 1 */
+	[19] = { "8890", "91A4" },
+		/* Teletex service basic and mixed mode
+		   and Group 4 facsimile service Classes II and III */
+	[20] = { "8890", "91A8" },
+		/* Teletex service basic and processable mode */
+	[21] = { "8890", "91B1" },
+		/* Teletex service basic mode */
+	[22] = { "8890", "91B2" },
+		/* International interworking for Videotex */
+	[23] = { "8890", "91B5" },
+		/* Telex */
+	[24] = { "8890", "91B8" },
+		/* Message Handling Systems in accordance with X.400 */
+	[25] = { "8890", "91C1" },
+		/* OSI application in accordance with X.200 */
+	[26] = { "9190A5", "9181" },
+		/* 7 kHz telephony */
+	[27] = { "9190A5", "916001" },
+		/* Video telephony, first connection */
+	[28] = { "8890", "916002" },
+		/* Video telephony, second connection */
+};
+
+/*
+ * helper functions
+ * ================
+ */
+
+/*
+ * emit unsupported parameter warning
+ */
+static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
+				       char *msgname, char *paramname)
+{
+	if (param && *param)
+		dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
+			 msgname, paramname);
+}
+
+/*
+ * check for legal hex digit
+ */
+static inline int ishexdigit(char c)
+{
+	if (c >= '0' && c <= '9')
+		return 1;
+	if (c >= 'A' && c <= 'F')
+		return 1;
+	if (c >= 'a' && c <= 'f')
+		return 1;
+	return 0;
+}
+
+/*
+ * convert hex to binary
+ */
+static inline u8 hex2bin(char c)
+{
+	int result = c & 0x0f;
+	if (c & 0x40)
+		result += 9;
+	return result;
+}
+
+/*
+ * convert an IE from Gigaset hex string to ETSI binary representation
+ * including length byte
+ * return value: result length, -1 on error
+ */
+static int encode_ie(char *in, u8 *out, int maxlen)
+{
+	int l = 0;
+	while (*in) {
+		if (!ishexdigit(in[0]) || !ishexdigit(in[1]) || l >= maxlen)
+			return -1;
+		out[++l] = (hex2bin(in[0]) << 4) + hex2bin(in[1]);
+		in += 2;
+	}
+	out[0] = l;
+	return l;
+}
+
+/*
+ * convert an IE from ETSI binary representation including length byte
+ * to Gigaset hex string
+ */
+static void decode_ie(u8 *in, char *out)
+{
+	int i = *in;
+	while (i-- > 0) {
+		/* ToDo: conversion to upper case necessary? */
+		*out++ = toupper(hex_asc_hi(*++in));
+		*out++ = toupper(hex_asc_lo(*in));
+	}
+}
+
+/*
+ * retrieve application data structure for an application ID
+ */
+static inline struct gigaset_capi_appl *
+get_appl(struct gigaset_capi_ctr *iif, u16 appl)
+{
+	struct gigaset_capi_appl *ap;
+
+	list_for_each_entry(ap, &iif->appls, ctrlist)
+		if (ap->id == appl)
+			return ap;
+	return NULL;
+}
+
+/*
+ * dump CAPI message to kernel messages for debugging
+ */
+static inline void dump_cmsg(enum debuglevel level, const char *tag, _cmsg *p)
+{
+#ifdef CONFIG_GIGASET_DEBUG
+	_cdebbuf *cdb;
+
+	if (!(gigaset_debuglevel & level))
+		return;
+
+	cdb = capi_cmsg2str(p);
+	if (cdb) {
+		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, cdb->buf);
+		cdebbuf_free(cdb);
+	} else {
+		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId,
+			capi_cmd2str(p->Command, p->Subcommand));
+	}
+#endif
+}
+
+static inline void dump_rawmsg(enum debuglevel level, const char *tag,
+			       unsigned char *data)
+{
+#ifdef CONFIG_GIGASET_DEBUG
+	char *dbgline;
+	int i, l;
+
+	if (!(gigaset_debuglevel & level))
+		return;
+
+	l = CAPIMSG_LEN(data);
+	if (l < 12) {
+		gig_dbg(level, "%s: ??? LEN=%04d", tag, l);
+		return;
+	}
+	gig_dbg(level, "%s: 0x%02x:0x%02x: ID=%03d #0x%04x LEN=%04d NCCI=0x%x",
+		tag, CAPIMSG_COMMAND(data), CAPIMSG_SUBCOMMAND(data),
+		CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l,
+		CAPIMSG_CONTROL(data));
+	l -= 12;
+	dbgline = kmalloc(3*l, GFP_ATOMIC);
+	if (!dbgline)
+		return;
+	for (i = 0; i < l; i++) {
+		dbgline[3*i] = hex_asc_hi(data[12+i]);
+		dbgline[3*i+1] = hex_asc_lo(data[12+i]);
+		dbgline[3*i+2] = ' ';
+	}
+	dbgline[3*l-1] = '\0';
+	gig_dbg(level, "  %s", dbgline);
+	kfree(dbgline);
+	if (CAPIMSG_COMMAND(data) == CAPI_DATA_B3 &&
+	    (CAPIMSG_SUBCOMMAND(data) == CAPI_REQ ||
+	     CAPIMSG_SUBCOMMAND(data) == CAPI_IND) &&
+	    CAPIMSG_DATALEN(data) > 0) {
+		l = CAPIMSG_DATALEN(data);
+		dbgline = kmalloc(3*l, GFP_ATOMIC);
+		if (!dbgline)
+			return;
+		data += CAPIMSG_LEN(data);
+		for (i = 0; i < l; i++) {
+			dbgline[3*i] = hex_asc_hi(data[i]);
+			dbgline[3*i+1] = hex_asc_lo(data[i]);
+			dbgline[3*i+2] = ' ';
+		}
+		dbgline[3*l-1] = '\0';
+		gig_dbg(level, "  %s", dbgline);
+		kfree(dbgline);
+	}
+#endif
+}
+
+/*
+ * format CAPI IE as string
+ */
+
+static const char *format_ie(const char *ie)
+{
+	static char result[3*MAX_FMT_IE_LEN];
+	int len, count;
+	char *pout = result;
+
+	if (!ie)
+		return "NULL";
+
+	count = len = ie[0];
+	if (count > MAX_FMT_IE_LEN)
+		count = MAX_FMT_IE_LEN-1;
+	while (count--) {
+		*pout++ = hex_asc_hi(*++ie);
+		*pout++ = hex_asc_lo(*ie);
+		*pout++ = ' ';
+	}
+	if (len > MAX_FMT_IE_LEN) {
+		*pout++ = '.';
+		*pout++ = '.';
+		*pout++ = '.';
+	}
+	*--pout = 0;
+	return result;
+}
+
+
+/*
+ * driver interface functions
+ * ==========================
+ */
+
+/**
+ * gigaset_skb_sent() - acknowledge transmission of outgoing skb
+ * @bcs:	B channel descriptor structure.
+ * @skb:	sent data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when the data in a
+ * skb has been successfully sent, for signalling completion to the LL.
+ */
+void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	unsigned char *req = skb_mac_header(dskb);
+	struct sk_buff *cskb;
+	u16 flags;
+
+	/* update statistics */
+	++bcs->trans_up;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+
+	/* don't send further B3 messages if disconnected */
+	if (ap->connected < APCONN_ACTIVE) {
+		gig_dbg(DEBUG_LLDATA, "disconnected, discarding ack");
+		return;
+	}
+
+	/* ToDo: honor unset "delivery confirmation" bit */
+	flags = CAPIMSG_FLAGS(req);
+
+	/* build DATA_B3_CONF message */
+	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
+	if (!cskb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	/* frequent message, avoid _cmsg overhead */
+	CAPIMSG_SETLEN(cskb->data, CAPI_DATA_B3_CONF_LEN);
+	CAPIMSG_SETAPPID(cskb->data, ap->id);
+	CAPIMSG_SETCOMMAND(cskb->data, CAPI_DATA_B3);
+	CAPIMSG_SETSUBCOMMAND(cskb->data,  CAPI_CONF);
+	CAPIMSG_SETMSGID(cskb->data, CAPIMSG_MSGID(req));
+	CAPIMSG_SETCONTROLLER(cskb->data, iif->ctr.cnr);
+	CAPIMSG_SETPLCI_PART(cskb->data, bcs->channel + 1);
+	CAPIMSG_SETNCCI_PART(cskb->data, 1);
+	CAPIMSG_SETHANDLE_CONF(cskb->data, CAPIMSG_HANDLE_REQ(req));
+	if (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION)
+		CAPIMSG_SETINFO_CONF(cskb->data,
+				     CapiFlagsNotSupportedByProtocol);
+	else
+		CAPIMSG_SETINFO_CONF(cskb->data, CAPI_NOERROR);
+
+	/* emit message */
+	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_CONF", cskb->data);
+	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_sent);
+
+/**
+ * gigaset_skb_rcvd() - pass received skb to LL
+ * @bcs:	B channel descriptor structure.
+ * @skb:	received data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when user data has
+ * been successfully received, for passing to the LL.
+ * Warning: skb must not be accessed anymore!
+ */
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	int len = skb->len;
+
+	/* update statistics */
+	bcs->trans_down++;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+
+	/* don't send further B3 messages if disconnected */
+	if (ap->connected < APCONN_ACTIVE) {
+		gig_dbg(DEBUG_LLDATA, "disconnected, discarding data");
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/*
+	 * prepend DATA_B3_IND message to payload
+	 * Parameters: NCCI = 1, all others 0/unused
+	 * frequent message, avoid _cmsg overhead
+	 */
+	skb_push(skb, CAPI_DATA_B3_REQ_LEN);
+	CAPIMSG_SETLEN(skb->data, CAPI_DATA_B3_REQ_LEN);
+	CAPIMSG_SETAPPID(skb->data, ap->id);
+	CAPIMSG_SETCOMMAND(skb->data, CAPI_DATA_B3);
+	CAPIMSG_SETSUBCOMMAND(skb->data,  CAPI_IND);
+	CAPIMSG_SETMSGID(skb->data, ap->nextMessageNumber++);
+	CAPIMSG_SETCONTROLLER(skb->data, iif->ctr.cnr);
+	CAPIMSG_SETPLCI_PART(skb->data, bcs->channel + 1);
+	CAPIMSG_SETNCCI_PART(skb->data, 1);
+	/* Data parameter not used */
+	CAPIMSG_SETDATALEN(skb->data, len);
+	/* Data handle parameter not used */
+	CAPIMSG_SETFLAGS(skb->data, 0);
+	/* Data64 parameter not present */
+
+	/* emit message */
+	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_IND", skb->data);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
+
+/**
+ * gigaset_isdn_rcv_err() - signal receive error
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when a receive error
+ * has occurred, for signalling to the LL.
+ */
+void gigaset_isdn_rcv_err(struct bc_state *bcs)
+{
+	/* if currently ignoring packets, just count down */
+	if (bcs->ignore) {
+		bcs->ignore--;
+		return;
+	}
+
+	/* update statistics */
+	bcs->corrupted++;
+
+	/* ToDo: signal error -> LL */
+}
+EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
+
+/**
+ * gigaset_isdn_icall() - signal incoming call
+ * @at_state:	connection state structure.
+ *
+ * Called by main module at tasklet level to notify the LL that an incoming
+ * call has been received. @at_state contains the parameters of the call.
+ *
+ * Return value: call disposition (ICALL_*)
+ */
+int gigaset_isdn_icall(struct at_state_t *at_state)
+{
+	struct cardstate *cs = at_state->cs;
+	struct bc_state *bcs = at_state->bcs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap;
+	u32 actCIPmask;
+	struct sk_buff *skb;
+	unsigned int msgsize;
+	int i;
+
+	/*
+	 * ToDo: signal calls without a free B channel, too
+	 * (requires a u8 handle for the at_state structure that can
+	 * be stored in the PLCI and used in the CONNECT_RESP message
+	 * handler to retrieve it)
+	 */
+	if (!bcs)
+		return ICALL_IGNORE;
+
+	/* prepare CONNECT_IND message, using B channel number as PLCI */
+	capi_cmsg_header(&iif->hcmsg, 0, CAPI_CONNECT, CAPI_IND, 0,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
+
+	/* minimum size, all structs empty */
+	msgsize = CAPI_CONNECT_IND_BASELEN;
+
+	/* Bearer Capability (mandatory) */
+	if (at_state->str_var[STR_ZBC]) {
+		/* pass on BC from Gigaset */
+		if (encode_ie(at_state->str_var[STR_ZBC], iif->bc_buf,
+			      MAX_BC_OCTETS) < 0) {
+			dev_warn(cs->dev, "RING ignored - bad BC %s\n",
+				 at_state->str_var[STR_ZBC]);
+			return ICALL_IGNORE;
+		}
+
+		/* look up corresponding CIP value */
+		iif->hcmsg.CIPValue = 0;	/* default if nothing found */
+		for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++)
+			if (cip2bchlc[i].bc != NULL &&
+			    cip2bchlc[i].hlc == NULL &&
+			    !strcmp(cip2bchlc[i].bc,
+				    at_state->str_var[STR_ZBC])) {
+				iif->hcmsg.CIPValue = i;
+				break;
+			}
+	} else {
+		/* no BC (internal call): assume CIP 1 (speech, A-law) */
+		iif->hcmsg.CIPValue = 1;
+		encode_ie(cip2bchlc[1].bc, iif->bc_buf, MAX_BC_OCTETS);
+	}
+	iif->hcmsg.BC = iif->bc_buf;
+	msgsize += iif->hcmsg.BC[0];
+
+	/* High Layer Compatibility (optional) */
+	if (at_state->str_var[STR_ZHLC]) {
+		/* pass on HLC from Gigaset */
+		if (encode_ie(at_state->str_var[STR_ZHLC], iif->hlc_buf,
+			      MAX_HLC_OCTETS) < 0) {
+			dev_warn(cs->dev, "RING ignored - bad HLC %s\n",
+				 at_state->str_var[STR_ZHLC]);
+			return ICALL_IGNORE;
+		}
+		iif->hcmsg.HLC = iif->hlc_buf;
+		msgsize += iif->hcmsg.HLC[0];
+
+		/* look up corresponding CIP value */
+		/* keep BC based CIP value if none found */
+		if (at_state->str_var[STR_ZBC])
+			for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++)
+				if (cip2bchlc[i].hlc != NULL &&
+				    !strcmp(cip2bchlc[i].hlc,
+					    at_state->str_var[STR_ZHLC]) &&
+				    !strcmp(cip2bchlc[i].bc,
+					    at_state->str_var[STR_ZBC])) {
+					iif->hcmsg.CIPValue = i;
+					break;
+				}
+	}
+
+	/* Called Party Number (optional) */
+	if (at_state->str_var[STR_ZCPN]) {
+		i = strlen(at_state->str_var[STR_ZCPN]);
+		if (i > MAX_NUMBER_DIGITS) {
+			dev_warn(cs->dev, "RING ignored - bad number %s\n",
+				 at_state->str_var[STR_ZBC]);
+			return ICALL_IGNORE;
+		}
+		iif->cdpty_buf[0] = i + 1;
+		iif->cdpty_buf[1] = 0x80; /* type / numbering plan unknown */
+		memcpy(iif->cdpty_buf+2, at_state->str_var[STR_ZCPN], i);
+		iif->hcmsg.CalledPartyNumber = iif->cdpty_buf;
+		msgsize += iif->hcmsg.CalledPartyNumber[0];
+	}
+
+	/* Calling Party Number (optional) */
+	if (at_state->str_var[STR_NMBR]) {
+		i = strlen(at_state->str_var[STR_NMBR]);
+		if (i > MAX_NUMBER_DIGITS) {
+			dev_warn(cs->dev, "RING ignored - bad number %s\n",
+				 at_state->str_var[STR_ZBC]);
+			return ICALL_IGNORE;
+		}
+		iif->cgpty_buf[0] = i + 2;
+		iif->cgpty_buf[1] = 0x00; /* type / numbering plan unknown */
+		iif->cgpty_buf[2] = 0x80; /* pres. allowed, not screened */
+		memcpy(iif->cgpty_buf+3, at_state->str_var[STR_NMBR], i);
+		iif->hcmsg.CallingPartyNumber = iif->cgpty_buf;
+		msgsize += iif->hcmsg.CallingPartyNumber[0];
+	}
+
+	/* remaining parameters (not supported, always left NULL):
+	 * - CalledPartySubaddress
+	 * - CallingPartySubaddress
+	 * - AdditionalInfo
+	 *   - BChannelinformation
+	 *   - Keypadfacility
+	 *   - Useruserdata
+	 *   - Facilitydataarray
+	 */
+
+	gig_dbg(DEBUG_CMD, "icall: PLCI %x CIP %d BC %s",
+		iif->hcmsg.adr.adrPLCI, iif->hcmsg.CIPValue,
+		format_ie(iif->hcmsg.BC));
+	gig_dbg(DEBUG_CMD, "icall: HLC %s",
+		format_ie(iif->hcmsg.HLC));
+	gig_dbg(DEBUG_CMD, "icall: CgPty %s",
+		format_ie(iif->hcmsg.CallingPartyNumber));
+	gig_dbg(DEBUG_CMD, "icall: CdPty %s",
+		format_ie(iif->hcmsg.CalledPartyNumber));
+
+	/* scan application list for matching listeners */
+	bcs->ap = NULL;
+	actCIPmask = 1 | (1 << iif->hcmsg.CIPValue);
+	list_for_each_entry(ap, &iif->appls, ctrlist)
+		if (actCIPmask & ap->listenCIPmask) {
+			/* build CONNECT_IND message for this application */
+			iif->hcmsg.ApplId = ap->id;
+			iif->hcmsg.Messagenumber = ap->nextMessageNumber++;
+
+			skb = alloc_skb(msgsize, GFP_ATOMIC);
+			if (!skb) {
+				dev_err(cs->dev, "%s: out of memory\n",
+					__func__);
+				break;
+			}
+			capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
+			dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+
+			/* add to listeners on this B channel, update state */
+			ap->bcnext = bcs->ap;
+			bcs->ap = ap;
+			bcs->chstate |= CHS_NOTIFY_LL;
+			ap->connected = APCONN_SETUP;
+
+			/* emit message */
+			capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+		}
+
+	/*
+	 * Return "accept" if any listeners.
+	 * Gigaset will send ALERTING.
+	 * There doesn't seem to be a way to avoid this.
+	 */
+	return bcs->ap ? ICALL_ACCEPT : ICALL_IGNORE;
+}
+
+/*
+ * send a DISCONNECT_IND message to an application
+ * does not sleep, clobbers the controller's hcmsg structure
+ */
+static void send_disconnect_ind(struct bc_state *bcs,
+				struct gigaset_capi_appl *ap, u16 reason)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct sk_buff *skb;
+
+	if (ap->connected == APCONN_NONE)
+		return;
+
+	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
+	iif->hcmsg.Reason = reason;
+	skb = alloc_skb(CAPI_DISCONNECT_IND_LEN, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, CAPI_DISCONNECT_IND_LEN));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	ap->connected = APCONN_NONE;
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/*
+ * send a DISCONNECT_B3_IND message to an application
+ * Parameters: NCCI = 1, NCPI empty, Reason_B3 = 0
+ * does not sleep, clobbers the controller's hcmsg structure
+ */
+static void send_disconnect_b3_ind(struct bc_state *bcs,
+				   struct gigaset_capi_appl *ap)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct sk_buff *skb;
+
+	/* nothing to do if no logical connection active */
+	if (ap->connected < APCONN_ACTIVE)
+		return;
+	ap->connected = APCONN_SETUP;
+
+	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
+	skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg,
+			  __skb_put(skb, CAPI_DISCONNECT_B3_IND_BASELEN));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/**
+ * gigaset_isdn_connD() - signal D channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module at tasklet level to notify the LL that the D channel
+ * connection has been established.
+ */
+void gigaset_isdn_connD(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	struct sk_buff *skb;
+	unsigned int msgsize;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+	while (ap->bcnext) {
+		/* this should never happen */
+		dev_warn(cs->dev, "%s: dropping extra application %u\n",
+			 __func__, ap->bcnext->id);
+		send_disconnect_ind(bcs, ap->bcnext,
+				    CapiCallGivenToOtherApplication);
+		ap->bcnext = ap->bcnext->bcnext;
+	}
+	if (ap->connected == APCONN_NONE) {
+		dev_warn(cs->dev, "%s: application %u not connected\n",
+			 __func__, ap->id);
+		return;
+	}
+
+	/* prepare CONNECT_ACTIVE_IND message
+	 * Note: LLC not supported by device
+	 */
+	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_CONNECT_ACTIVE, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
+
+	/* minimum size, all structs empty */
+	msgsize = CAPI_CONNECT_ACTIVE_IND_BASELEN;
+
+	/* ToDo: set parameter: Connected number
+	 * (requires ev-layer state machine extension to collect
+	 * ZCON device reply)
+	 */
+
+	/* build and emit CONNECT_ACTIVE_IND message */
+	skb = alloc_skb(msgsize, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/**
+ * gigaset_isdn_hupD() - signal D channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module at tasklet level to notify the LL that the D channel
+ * connection has been shut down.
+ */
+void gigaset_isdn_hupD(struct bc_state *bcs)
+{
+	struct gigaset_capi_appl *ap;
+
+	/*
+	 * ToDo: pass on reason code reported by device
+	 * (requires ev-layer state machine extension to collect
+	 * ZCAU device reply)
+	 */
+	for (ap = bcs->ap; ap != NULL; ap = ap->bcnext) {
+		send_disconnect_b3_ind(bcs, ap);
+		send_disconnect_ind(bcs, ap, 0);
+	}
+	bcs->ap = NULL;
+}
+
+/**
+ * gigaset_isdn_connB() - signal B channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module at tasklet level to notify the LL that the B channel
+ * connection has been established.
+ */
+void gigaset_isdn_connB(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	struct sk_buff *skb;
+	unsigned int msgsize;
+	u8 command;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+	while (ap->bcnext) {
+		/* this should never happen */
+		dev_warn(cs->dev, "%s: dropping extra application %u\n",
+			 __func__, ap->bcnext->id);
+		send_disconnect_ind(bcs, ap->bcnext,
+				    CapiCallGivenToOtherApplication);
+		ap->bcnext = ap->bcnext->bcnext;
+	}
+	if (!ap->connected) {
+		dev_warn(cs->dev, "%s: application %u not connected\n",
+			 __func__, ap->id);
+		return;
+	}
+
+	/*
+	 * emit CONNECT_B3_ACTIVE_IND if we already got CONNECT_B3_REQ;
+	 * otherwise we have to emit CONNECT_B3_IND first, and follow up with
+	 * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP
+	 * Parameters in both cases always: NCCI = 1, NCPI empty
+	 */
+	if (ap->connected >= APCONN_ACTIVE) {
+		command = CAPI_CONNECT_B3_ACTIVE;
+		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
+	} else {
+		command = CAPI_CONNECT_B3;
+		msgsize = CAPI_CONNECT_B3_IND_BASELEN;
+	}
+	capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
+	skb = alloc_skb(msgsize, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	ap->connected = APCONN_ACTIVE;
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/**
+ * gigaset_isdn_hupB() - signal B channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the B channel connection has
+ * been shut down.
+ */
+void gigaset_isdn_hupB(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_appl *ap = bcs->ap;
+
+	/* ToDo: assure order of DISCONNECT_B3_IND and DISCONNECT_IND ? */
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+
+	send_disconnect_b3_ind(bcs, ap);
+}
+
+/**
+ * gigaset_isdn_start() - signal device availability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is available for
+ * use.
+ */
+void gigaset_isdn_start(struct cardstate *cs)
+{
+	struct gigaset_capi_ctr *iif = cs->iif;
+
+	/* fill profile data: manufacturer name */
+	strcpy(iif->ctr.manu, "Siemens");
+	/* CAPI and device version */
+	iif->ctr.version.majorversion = 2;		/* CAPI 2.0 */
+	iif->ctr.version.minorversion = 0;
+	/* ToDo: check/assert cs->gotfwver? */
+	iif->ctr.version.majormanuversion = cs->fwver[0];
+	iif->ctr.version.minormanuversion = cs->fwver[1];
+	/* number of B channels supported */
+	iif->ctr.profile.nbchannel = cs->channels;
+	/* global options: internal controller, supplementary services */
+	iif->ctr.profile.goptions = 0x11;
+	/* B1 protocols: 64 kbit/s HDLC or transparent */
+	iif->ctr.profile.support1 =  0x03;
+	/* B2 protocols: transparent only */
+	/* ToDo: X.75 SLP ? */
+	iif->ctr.profile.support2 =  0x02;
+	/* B3 protocols: transparent only */
+	iif->ctr.profile.support3 =  0x01;
+	/* no serial number */
+	strcpy(iif->ctr.serial, "0");
+	capi_ctr_ready(&iif->ctr);
+}
+
+/**
+ * gigaset_isdn_stop() - signal device unavailability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is no longer
+ * available for use.
+ */
+void gigaset_isdn_stop(struct cardstate *cs)
+{
+	struct gigaset_capi_ctr *iif = cs->iif;
+	capi_ctr_down(&iif->ctr);
+}
+
+/*
+ * kernel CAPI callback methods
+ * ============================
+ */
+
+/*
+ * load firmware
+ */
+static int gigaset_load_firmware(struct capi_ctr *ctr, capiloaddata *data)
+{
+	struct cardstate *cs = ctr->driverdata;
+
+	/* AVM specific operation, not needed for Gigaset -- ignore */
+	dev_notice(cs->dev, "load_firmware ignored\n");
+
+	return 0;
+}
+
+/*
+ * reset (deactivate) controller
+ */
+static void gigaset_reset_ctr(struct capi_ctr *ctr)
+{
+	struct cardstate *cs = ctr->driverdata;
+
+	/* AVM specific operation, not needed for Gigaset -- ignore */
+	dev_notice(cs->dev, "reset_ctr ignored\n");
+}
+
+/*
+ * register CAPI application
+ */
+static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl,
+			   capi_register_params *rp)
+{
+	struct gigaset_capi_ctr *iif
+		= container_of(ctr, struct gigaset_capi_ctr, ctr);
+	struct cardstate *cs = ctr->driverdata;
+	struct gigaset_capi_appl *ap;
+
+	list_for_each_entry(ap, &iif->appls, ctrlist)
+		if (ap->id == appl) {
+			dev_notice(cs->dev,
+				   "application %u already registered\n", appl);
+			return;
+		}
+
+	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	if (!ap) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	ap->id = appl;
+
+	list_add(&ap->ctrlist, &iif->appls);
+}
+
+/*
+ * release CAPI application
+ */
+static void gigaset_release_appl(struct capi_ctr *ctr, u16 appl)
+{
+	struct gigaset_capi_ctr *iif
+		= container_of(ctr, struct gigaset_capi_ctr, ctr);
+	struct cardstate *cs = iif->ctr.driverdata;
+	struct gigaset_capi_appl *ap, *tmp;
+
+	list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist)
+		if (ap->id == appl) {
+			if (ap->connected != APCONN_NONE) {
+				dev_err(cs->dev,
+					"%s: application %u still connected\n",
+					__func__, ap->id);
+				/* ToDo: clear active connection */
+			}
+			list_del(&ap->ctrlist);
+			kfree(ap);
+		}
+
+}
+
+/*
+ * =====================================================================
+ * outgoing CAPI message handler
+ * =====================================================================
+ */
+
+/*
+ * helper function: emit reply message with given Info value
+ */
+static void send_conf(struct gigaset_capi_ctr *iif,
+		      struct gigaset_capi_appl *ap,
+		      struct sk_buff *skb,
+		      u16 info)
+{
+	/*
+	 * _CONF replies always only have NCCI and Info parameters
+	 * so they'll fit into the _REQ message skb
+	 */
+	capi_cmsg_answer(&iif->acmsg);
+	iif->acmsg.Info = info;
+	capi_cmsg2message(&iif->acmsg, skb->data);
+	__skb_trim(skb, CAPI_STDCONF_LEN);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/*
+ * process FACILITY_REQ message
+ */
+static void do_facility_req(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct sk_buff *cskb;
+	u8 *pparam;
+	unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
+	u16 function, info;
+	static u8 confparam[10];	/* max. 9 octets + length byte */
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/*
+	 * Facility Request Parameter is not decoded by capi_message2cmsg()
+	 * encoding depends on Facility Selector
+	 */
+	switch (cmsg->FacilitySelector) {
+	case CAPI_FACILITY_DTMF:	/* ToDo */
+		info = CapiFacilityNotSupported;
+		confparam[0] = 2;	/* length */
+		/* DTMF information: Unknown DTMF request */
+		capimsg_setu16(confparam, 1, 2);
+		break;
+
+	case CAPI_FACILITY_V42BIS:	/* not supported */
+		info = CapiFacilityNotSupported;
+		confparam[0] = 2;	/* length */
+		/* V.42 bis information: not available */
+		capimsg_setu16(confparam, 1, 1);
+		break;
+
+	case CAPI_FACILITY_SUPPSVC:
+		/* decode Function parameter */
+		pparam = cmsg->FacilityRequestParameter;
+		if (pparam == NULL || *pparam < 2) {
+			dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
+				   "Facility Request Parameter");
+			send_conf(iif, ap, skb, CapiIllMessageParmCoding);
+			return;
+		}
+		function = CAPIMSG_U16(pparam, 1);
+		switch (function) {
+		case CAPI_SUPPSVC_GETSUPPORTED:
+			info = CapiSuccess;
+			/* Supplementary Service specific parameter */
+			confparam[3] = 6;	/* length */
+			/* Supplementary services info: Success */
+			capimsg_setu16(confparam, 4, CapiSuccess);
+			/* Supported Services: none */
+			capimsg_setu32(confparam, 6, 0);
+			break;
+		/* ToDo: add supported services */
+		default:
+			info = CapiFacilitySpecificFunctionNotSupported;
+			/* Supplementary Service specific parameter */
+			confparam[3] = 2;	/* length */
+			/* Supplementary services info: not supported */
+			capimsg_setu16(confparam, 4,
+				       CapiSupplementaryServiceNotSupported);
+		}
+
+		/* Facility confirmation parameter */
+		confparam[0] = confparam[3] + 3;	/* total length */
+		/* Function: copy from _REQ message */
+		capimsg_setu16(confparam, 1, function);
+		/* Supplementary Service specific parameter already set above */
+		break;
+
+	case CAPI_FACILITY_WAKEUP:	/* ToDo */
+		info = CapiFacilityNotSupported;
+		confparam[0] = 2;	/* length */
+		/* Number of accepted awake request parameters: 0 */
+		capimsg_setu16(confparam, 1, 0);
+		break;
+
+	default:
+		info = CapiFacilityNotSupported;
+		confparam[0] = 0;	/* empty struct */
+	}
+
+	/* send FACILITY_CONF with given Info and confirmation parameter */
+	capi_cmsg_answer(cmsg);
+	cmsg->Info = info;
+	cmsg->FacilityConfirmationParameter = confparam;
+	msgsize += confparam[0];	/* length */
+	cskb = alloc_skb(msgsize, GFP_ATOMIC);
+	if (!cskb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(cmsg, __skb_put(cskb, msgsize));
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+}
+
+
+/*
+ * process LISTEN_REQ message
+ * just store the masks in the application data structure
+ */
+static void do_listen_req(struct gigaset_capi_ctr *iif,
+			  struct gigaset_capi_appl *ap,
+			  struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+
+	/* store listening parameters */
+	ap->listenInfoMask = iif->acmsg.InfoMask;
+	ap->listenCIPmask = iif->acmsg.CIPmask;
+	send_conf(iif, ap, skb, CapiSuccess);
+}
+
+/*
+ * process ALERT_REQ message
+ * nothing to do, Gigaset always alerts anyway
+ */
+static void do_alert_req(struct gigaset_capi_ctr *iif,
+			 struct gigaset_capi_appl *ap,
+			 struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	send_conf(iif, ap, skb, CapiAlertAlreadySent);
+}
+
+/*
+ * process CONNECT_REQ message
+ * allocate a B channel, prepare dial commands, queue a DIAL event,
+ * emit CONNECT_CONF reply
+ */
+static void do_connect_req(struct gigaset_capi_ctr *iif,
+			   struct gigaset_capi_appl *ap,
+			   struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	char **commands;
+	char *s;
+	u8 *pp;
+	int i, l;
+	u16 info;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* get free B channel & construct PLCI */
+	bcs = gigaset_get_free_channel(cs);
+	if (!bcs) {
+		dev_notice(cs->dev, "%s: no B channel available\n",
+			   "CONNECT_REQ");
+		send_conf(iif, ap, skb, CapiNoPlciAvailable);
+		return;
+	}
+	ap->bcnext = NULL;
+	bcs->ap = ap;
+	cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8;
+
+	/* build command table */
+	commands = kzalloc(AT_NUM*(sizeof *commands), GFP_KERNEL);
+	if (!commands)
+		goto oom;
+
+	/* encode parameter: Called party number */
+	pp = cmsg->CalledPartyNumber;
+	if (pp == NULL || *pp == 0) {
+		dev_notice(cs->dev, "%s: %s missing\n",
+			   "CONNECT_REQ", "Called party number");
+		info = CapiIllMessageParmCoding;
+		goto error;
+	}
+	l = *pp++;
+	/* check type of number/numbering plan byte */
+	switch (*pp) {
+	case 0x80:	/* unknown type / unknown numbering plan */
+	case 0x81:	/* unknown type / ISDN/Telephony numbering plan */
+		break;
+	default:	/* others: warn about potential misinterpretation */
+		dev_notice(cs->dev, "%s: %s type/plan 0x%02x unsupported\n",
+			   "CONNECT_REQ", "Called party number", *pp);
+	}
+	pp++;
+	l--;
+	/* translate "**" internal call prefix to CTP value */
+	if (l >= 2 && pp[0] == '*' && pp[1] == '*') {
+		s = "^SCTP=0\r";
+		pp += 2;
+		l -= 2;
+	} else {
+		s = "^SCTP=1\r";
+	}
+	commands[AT_TYPE] = kstrdup(s, GFP_KERNEL);
+	if (!commands[AT_TYPE])
+		goto oom;
+	commands[AT_DIAL] = kmalloc(l+3, GFP_KERNEL);
+	if (!commands[AT_DIAL])
+		goto oom;
+	snprintf(commands[AT_DIAL], l+3, "D%.*s\r", l, pp);
+
+	/* encode parameter: Calling party number */
+	pp = cmsg->CallingPartyNumber;
+	if (pp != NULL && *pp > 0) {
+		l = *pp++;
+
+		/* check type of number/numbering plan byte */
+		/* ToDo: allow for/handle Ext=1? */
+		switch (*pp) {
+		case 0x00:	/* unknown type / unknown numbering plan */
+		case 0x01:	/* unknown type / ISDN/Telephony num. plan */
+			break;
+		default:
+			dev_notice(cs->dev,
+				   "%s: %s type/plan 0x%02x unsupported\n",
+				   "CONNECT_REQ", "Calling party number", *pp);
+		}
+		pp++;
+		l--;
+
+		/* check presentation indicator */
+		if (!l) {
+			dev_notice(cs->dev, "%s: %s IE truncated\n",
+				   "CONNECT_REQ", "Calling party number");
+			info = CapiIllMessageParmCoding;
+			goto error;
+		}
+		switch (*pp & 0xfc) { /* ignore Screening indicator */
+		case 0x80:	/* Presentation allowed */
+			s = "^SCLIP=1\r";
+			break;
+		case 0xa0:	/* Presentation restricted */
+			s = "^SCLIP=0\r";
+			break;
+		default:
+			dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+				   "CONNECT_REQ",
+				   "Presentation/Screening indicator",
+				   *pp);
+			s = "^SCLIP=1\r";
+		}
+		commands[AT_CLIP] = kstrdup(s, GFP_KERNEL);
+		if (!commands[AT_CLIP])
+			goto oom;
+		pp++;
+		l--;
+
+		if (l) {
+			/* number */
+			commands[AT_MSN] = kmalloc(l+8, GFP_KERNEL);
+			if (!commands[AT_MSN])
+				goto oom;
+			snprintf(commands[AT_MSN], l+8, "^SMSN=%*s\r", l, pp);
+		}
+	}
+
+	/* check parameter: CIP Value */
+	if (cmsg->CIPValue > ARRAY_SIZE(cip2bchlc) ||
+	    (cmsg->CIPValue > 0 && cip2bchlc[cmsg->CIPValue].bc == NULL)) {
+		dev_notice(cs->dev, "%s: unknown CIP value %d\n",
+			   "CONNECT_REQ", cmsg->CIPValue);
+		info = CapiCipValueUnknown;
+		goto error;
+	}
+
+	/* check/encode parameter: BC */
+	if (cmsg->BC && cmsg->BC[0]) {
+		/* explicit BC overrides CIP */
+		l = 2*cmsg->BC[0] + 7;
+		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_BC])
+			goto oom;
+		strcpy(commands[AT_BC], "^SBC=");
+		decode_ie(cmsg->BC, commands[AT_BC]+5);
+		strcpy(commands[AT_BC] + l - 2, "\r");
+	} else if (cip2bchlc[cmsg->CIPValue].bc) {
+		l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
+		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_BC])
+			goto oom;
+		snprintf(commands[AT_BC], l, "^SBC=%s\r",
+			 cip2bchlc[cmsg->CIPValue].bc);
+	}
+
+	/* check/encode parameter: HLC */
+	if (cmsg->HLC && cmsg->HLC[0]) {
+		/* explicit HLC overrides CIP */
+		l = 2*cmsg->HLC[0] + 7;
+		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_HLC])
+			goto oom;
+		strcpy(commands[AT_HLC], "^SHLC=");
+		decode_ie(cmsg->HLC, commands[AT_HLC]+5);
+		strcpy(commands[AT_HLC] + l - 2, "\r");
+	} else if (cip2bchlc[cmsg->CIPValue].hlc) {
+		l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
+		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_HLC])
+			goto oom;
+		snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
+			 cip2bchlc[cmsg->CIPValue].hlc);
+	}
+
+	/* check/encode parameter: B Protocol */
+	if (cmsg->BProtocol == CAPI_DEFAULT) {
+		bcs->proto2 = L2_HDLC;
+		dev_warn(cs->dev,
+		    "B2 Protocol X.75 SLP unsupported, using Transparent\n");
+	} else {
+		switch (cmsg->B1protocol) {
+		case 0:
+			bcs->proto2 = L2_HDLC;
+			break;
+		case 1:
+			bcs->proto2 = L2_BITSYNC;
+			break;
+		default:
+			dev_warn(cs->dev,
+			    "B1 Protocol %u unsupported, using Transparent\n",
+				 cmsg->B1protocol);
+			bcs->proto2 = L2_BITSYNC;
+		}
+		if (cmsg->B2protocol != 1)
+			dev_warn(cs->dev,
+			    "B2 Protocol %u unsupported, using Transparent\n",
+				 cmsg->B2protocol);
+		if (cmsg->B3protocol != 0)
+			dev_warn(cs->dev,
+			    "B3 Protocol %u unsupported, using Transparent\n",
+				 cmsg->B3protocol);
+		ignore_cstruct_param(cs, cmsg->B1configuration,
+					"CONNECT_REQ", "B1 Configuration");
+		ignore_cstruct_param(cs, cmsg->B2configuration,
+					"CONNECT_REQ", "B2 Configuration");
+		ignore_cstruct_param(cs, cmsg->B3configuration,
+					"CONNECT_REQ", "B3 Configuration");
+	}
+	commands[AT_PROTO] = kmalloc(9, GFP_KERNEL);
+	if (!commands[AT_PROTO])
+		goto oom;
+	snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
+
+	/* ToDo: check/encode remaining parameters */
+	ignore_cstruct_param(cs, cmsg->CalledPartySubaddress,
+					"CONNECT_REQ", "Called pty subaddr");
+	ignore_cstruct_param(cs, cmsg->CallingPartySubaddress,
+					"CONNECT_REQ", "Calling pty subaddr");
+	ignore_cstruct_param(cs, cmsg->LLC,
+					"CONNECT_REQ", "LLC");
+	if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+		ignore_cstruct_param(cs, cmsg->BChannelinformation,
+					"CONNECT_REQ", "B Channel Information");
+		ignore_cstruct_param(cs, cmsg->Keypadfacility,
+					"CONNECT_REQ", "Keypad Facility");
+		ignore_cstruct_param(cs, cmsg->Useruserdata,
+					"CONNECT_REQ", "User-User Data");
+		ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+					"CONNECT_REQ", "Facility Data Array");
+	}
+
+	/* encode parameter: B channel to use */
+	commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
+	if (!commands[AT_ISO])
+		goto oom;
+	snprintf(commands[AT_ISO], 9, "^SISO=%u\r",
+		 (unsigned) bcs->channel + 1);
+
+	/* queue & schedule EV_DIAL event */
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands,
+			       bcs->at_state.seq_index, NULL))
+		goto oom;
+	gig_dbg(DEBUG_CMD, "scheduling DIAL");
+	gigaset_schedule_event(cs);
+	ap->connected = APCONN_SETUP;
+	send_conf(iif, ap, skb, CapiSuccess);
+	return;
+
+oom:
+	dev_err(cs->dev, "%s: out of memory\n", __func__);
+	info = CAPI_MSGOSRESOURCEERR;
+error:
+	if (commands)
+		for (i = 0; i < AT_NUM; i++)
+			kfree(commands[i]);
+	kfree(commands);
+	gigaset_free_channel(bcs);
+	send_conf(iif, ap, skb, info);
+}
+
+/*
+ * process CONNECT_RESP message
+ * checks protocol parameters and queues an ACCEPT or HUP event
+ */
+static void do_connect_resp(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	struct gigaset_capi_appl *oap;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+	dev_kfree_skb_any(skb);
+
+	/* extract and check channel number from PLCI */
+	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "CONNECT_RESP", "PLCI", cmsg->adr.adrPLCI);
+		return;
+	}
+	bcs = cs->bcs + channel - 1;
+
+	switch (cmsg->Reject) {
+	case 0:		/* Accept */
+		/* drop all competing applications, keep only this one */
+		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
+			if (oap != ap)
+				send_disconnect_ind(bcs, oap,
+					CapiCallGivenToOtherApplication);
+		ap->bcnext = NULL;
+		bcs->ap = ap;
+		bcs->chstate |= CHS_NOTIFY_LL;
+
+		/* check/encode B channel protocol */
+		if (cmsg->BProtocol == CAPI_DEFAULT) {
+			bcs->proto2 = L2_HDLC;
+			dev_warn(cs->dev,
+		"B2 Protocol X.75 SLP unsupported, using Transparent\n");
+		} else {
+			switch (cmsg->B1protocol) {
+			case 0:
+				bcs->proto2 = L2_HDLC;
+				break;
+			case 1:
+				bcs->proto2 = L2_BITSYNC;
+				break;
+			default:
+				dev_warn(cs->dev,
+			"B1 Protocol %u unsupported, using Transparent\n",
+					 cmsg->B1protocol);
+				bcs->proto2 = L2_BITSYNC;
+			}
+			if (cmsg->B2protocol != 1)
+				dev_warn(cs->dev,
+			"B2 Protocol %u unsupported, using Transparent\n",
+					 cmsg->B2protocol);
+			if (cmsg->B3protocol != 0)
+				dev_warn(cs->dev,
+			"B3 Protocol %u unsupported, using Transparent\n",
+					 cmsg->B3protocol);
+			ignore_cstruct_param(cs, cmsg->B1configuration,
+					"CONNECT_RESP", "B1 Configuration");
+			ignore_cstruct_param(cs, cmsg->B2configuration,
+					"CONNECT_RESP", "B2 Configuration");
+			ignore_cstruct_param(cs, cmsg->B3configuration,
+					"CONNECT_RESP", "B3 Configuration");
+		}
+
+		/* ToDo: check/encode remaining parameters */
+		ignore_cstruct_param(cs, cmsg->ConnectedNumber,
+					"CONNECT_RESP", "Connected Number");
+		ignore_cstruct_param(cs, cmsg->ConnectedSubaddress,
+					"CONNECT_RESP", "Connected Subaddress");
+		ignore_cstruct_param(cs, cmsg->LLC,
+					"CONNECT_RESP", "LLC");
+		if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+			ignore_cstruct_param(cs, cmsg->BChannelinformation,
+					"CONNECT_RESP", "BChannel Information");
+			ignore_cstruct_param(cs, cmsg->Keypadfacility,
+					"CONNECT_RESP", "Keypad Facility");
+			ignore_cstruct_param(cs, cmsg->Useruserdata,
+					"CONNECT_RESP", "User-User Data");
+			ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+					"CONNECT_RESP", "Facility Data Array");
+		}
+
+		/* Accept call */
+		if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
+				       EV_ACCEPT, NULL, 0, NULL))
+			return;
+		gig_dbg(DEBUG_CMD, "scheduling ACCEPT");
+		gigaset_schedule_event(cs);
+		return;
+
+	case 1:			/* Ignore */
+		/* send DISCONNECT_IND to this application */
+		send_disconnect_ind(bcs, ap, 0);
+
+		/* remove it from the list of listening apps */
+		if (bcs->ap == ap) {
+			bcs->ap = ap->bcnext;
+			if (bcs->ap == NULL)
+				/* last one: stop ev-layer hupD notifications */
+				bcs->chstate &= ~CHS_NOTIFY_LL;
+			return;
+		}
+		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) {
+			if (oap->bcnext == ap) {
+				oap->bcnext = oap->bcnext->bcnext;
+				return;
+			}
+		}
+		dev_err(cs->dev, "%s: application %u not found\n",
+			__func__, ap->id);
+		return;
+
+	default:		/* Reject */
+		/* drop all competing applications, keep only this one */
+		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
+			if (oap != ap)
+				send_disconnect_ind(bcs, oap,
+					CapiCallGivenToOtherApplication);
+		ap->bcnext = NULL;
+		bcs->ap = ap;
+
+		/* reject call - will trigger DISCONNECT_IND for this app */
+		dev_info(cs->dev, "%s: Reject=%x\n",
+			 "CONNECT_RESP", cmsg->Reject);
+		if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
+				       EV_HUP, NULL, 0, NULL))
+			return;
+		gig_dbg(DEBUG_CMD, "scheduling HUP");
+		gigaset_schedule_event(cs);
+		return;
+	}
+}
+
+/*
+ * process CONNECT_B3_REQ message
+ * build NCCI and emit CONNECT_B3_CONF reply
+ */
+static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
+			      struct gigaset_capi_appl *ap,
+			      struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number from PLCI */
+	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+
+	/* mark logical connection active */
+	ap->connected = APCONN_ACTIVE;
+
+	/* build NCCI: always 1 (one B3 connection only) */
+	cmsg->adr.adrNCCI |= 1 << 16;
+
+	/* NCPI parameter: not applicable for B3 Transparent */
+	ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
+	send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+				CapiNcpiNotSupportedByProtocol : CapiSuccess);
+}
+
+/*
+ * process CONNECT_B3_RESP message
+ * Depending on the Reject parameter, either emit CONNECT_B3_ACTIVE_IND
+ * or queue EV_HUP and emit DISCONNECT_B3_IND.
+ * The emitted message is always shorter than the received one,
+ * allowing to reuse the skb.
+ */
+static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
+			       struct gigaset_capi_appl *ap,
+			       struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	int channel;
+	unsigned int msgsize;
+	u8 command;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number and NCCI */
+	channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels ||
+	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+	bcs = &cs->bcs[channel-1];
+
+	if (cmsg->Reject) {
+		/* Reject: clear B3 connect received flag */
+		ap->connected = APCONN_SETUP;
+
+		/* trigger hangup, causing eventual DISCONNECT_IND */
+		if (!gigaset_add_event(cs, &bcs->at_state,
+				       EV_HUP, NULL, 0, NULL)) {
+			dev_err(cs->dev, "%s: out of memory\n", __func__);
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		gig_dbg(DEBUG_CMD, "scheduling HUP");
+		gigaset_schedule_event(cs);
+
+		/* emit DISCONNECT_B3_IND */
+		command = CAPI_DISCONNECT_B3;
+		msgsize = CAPI_DISCONNECT_B3_IND_BASELEN;
+	} else {
+		/*
+		 * Accept: emit CONNECT_B3_ACTIVE_IND immediately, as
+		 * we only send CONNECT_B3_IND if the B channel is up
+		 */
+		command = CAPI_CONNECT_B3_ACTIVE;
+		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
+	}
+	capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
+			 ap->nextMessageNumber++, cmsg->adr.adrNCCI);
+	__skb_trim(skb, msgsize);
+	capi_cmsg2message(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/*
+ * process DISCONNECT_REQ message
+ * schedule EV_HUP and emit DISCONNECT_B3_IND if necessary,
+ * emit DISCONNECT_CONF reply
+ */
+static void do_disconnect_req(struct gigaset_capi_ctr *iif,
+			      struct gigaset_capi_appl *ap,
+			      struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	_cmsg *b3cmsg;
+	struct sk_buff *b3skb;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number from PLCI */
+	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+	bcs = cs->bcs + channel - 1;
+
+	/* ToDo: process parameter: Additional info */
+	if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+		ignore_cstruct_param(cs, cmsg->BChannelinformation,
+				     "DISCONNECT_REQ", "B Channel Information");
+		ignore_cstruct_param(cs, cmsg->Keypadfacility,
+				     "DISCONNECT_REQ", "Keypad Facility");
+		ignore_cstruct_param(cs, cmsg->Useruserdata,
+				     "DISCONNECT_REQ", "User-User Data");
+		ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+				     "DISCONNECT_REQ", "Facility Data Array");
+	}
+
+	/* skip if DISCONNECT_IND already sent */
+	if (!ap->connected)
+		return;
+
+	/* check for active logical connection */
+	if (ap->connected >= APCONN_ACTIVE) {
+		/*
+		 * emit DISCONNECT_B3_IND with cause 0x3301
+		 * use separate cmsg structure, as the content of iif->acmsg
+		 * is still needed for creating the _CONF message
+		 */
+		b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL);
+		if (!b3cmsg) {
+			dev_err(cs->dev, "%s: out of memory\n", __func__);
+			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+			return;
+		}
+		capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
+				 ap->nextMessageNumber++,
+				 cmsg->adr.adrPLCI | (1 << 16));
+		b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
+		b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
+		if (b3skb == NULL) {
+			dev_err(cs->dev, "%s: out of memory\n", __func__);
+			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+			return;
+		}
+		capi_cmsg2message(b3cmsg,
+			__skb_put(b3skb, CAPI_DISCONNECT_B3_IND_BASELEN));
+		kfree(b3cmsg);
+		capi_ctr_handle_message(&iif->ctr, ap->id, b3skb);
+	}
+
+	/* trigger hangup, causing eventual DISCONNECT_IND */
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+		return;
+	}
+	gig_dbg(DEBUG_CMD, "scheduling HUP");
+	gigaset_schedule_event(cs);
+
+	/* emit reply */
+	send_conf(iif, ap, skb, CapiSuccess);
+}
+
+/*
+ * process DISCONNECT_B3_REQ message
+ * schedule EV_HUP and emit DISCONNECT_B3_CONF reply
+ */
+static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
+				 struct gigaset_capi_appl *ap,
+				 struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number and NCCI */
+	channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels ||
+	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+
+	/* reject if logical connection not active */
+	if (ap->connected < APCONN_ACTIVE) {
+		send_conf(iif, ap, skb,
+			  CapiMessageNotSupportedInCurrentState);
+		return;
+	}
+
+	/* trigger hangup, causing eventual DISCONNECT_B3_IND */
+	if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
+			       EV_HUP, NULL, 0, NULL)) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+		return;
+	}
+	gig_dbg(DEBUG_CMD, "scheduling HUP");
+	gigaset_schedule_event(cs);
+
+	/* NCPI parameter: not applicable for B3 Transparent */
+	ignore_cstruct_param(cs, cmsg->NCPI,
+				"DISCONNECT_B3_REQ", "NCPI");
+	send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+				CapiNcpiNotSupportedByProtocol : CapiSuccess);
+}
+
+/*
+ * process DATA_B3_REQ message
+ */
+static void do_data_b3_req(struct gigaset_capi_ctr *iif,
+			   struct gigaset_capi_appl *ap,
+			   struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	int channel = CAPIMSG_PLCI_PART(skb->data);
+	u16 ncci = CAPIMSG_NCCI_PART(skb->data);
+	u16 msglen = CAPIMSG_LEN(skb->data);
+	u16 datalen = CAPIMSG_DATALEN(skb->data);
+	u16 flags = CAPIMSG_FLAGS(skb->data);
+
+	/* frequent message, avoid _cmsg overhead */
+	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_REQ", skb->data);
+
+	gig_dbg(DEBUG_LLDATA,
+		"Receiving data from LL (ch: %d, flg: %x, sz: %d|%d)",
+		channel, flags, msglen, datalen);
+
+	/* check parameters */
+	if (channel == 0 || channel > cs->channels || ncci != 1) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "DATA_B3_REQ", "NCCI", CAPIMSG_NCCI(skb->data));
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+	if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64)
+		dev_notice(cs->dev, "%s: unexpected length %d\n",
+			   "DATA_B3_REQ", msglen);
+	if (msglen + datalen != skb->len)
+		dev_notice(cs->dev, "%s: length mismatch (%d+%d!=%d)\n",
+			   "DATA_B3_REQ", msglen, datalen, skb->len);
+	if (msglen + datalen > skb->len) {
+		/* message too short for announced data length */
+		send_conf(iif, ap, skb, CapiIllMessageParmCoding); /* ? */
+		return;
+	}
+	if (flags & CAPI_FLAGS_RESERVED) {
+		dev_notice(cs->dev, "%s: reserved flags set (%x)\n",
+			   "DATA_B3_REQ", flags);
+		send_conf(iif, ap, skb, CapiIllMessageParmCoding);
+		return;
+	}
+
+	/* reject if logical connection not active */
+	if (ap->connected < APCONN_ACTIVE) {
+		send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
+		return;
+	}
+
+	/* pull CAPI message into link layer header */
+	skb_reset_mac_header(skb);
+	skb->mac_len = msglen;
+	skb_pull(skb, msglen);
+
+	/* pass to device-specific module */
+	if (cs->ops->send_skb(&cs->bcs[channel-1], skb) < 0) {
+		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+		return;
+	}
+
+	/* DATA_B3_CONF reply will be sent by gigaset_skb_sent() */
+
+	/*
+	 * ToDo: honor unset "delivery confirmation" bit
+	 * (send DATA_B3_CONF immediately?)
+	 */
+}
+
+/*
+ * process RESET_B3_REQ message
+ * just always reply "not supported by current protocol"
+ */
+static void do_reset_b3_req(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	send_conf(iif, ap, skb,
+		  CapiResetProcedureNotSupportedByCurrentProtocol);
+}
+
+/*
+ * dump unsupported/ignored messages at most twice per minute,
+ * some apps send those very frequently
+ */
+static unsigned long ignored_msg_dump_time;
+
+/*
+ * unsupported CAPI message handler
+ */
+static void do_unsupported(struct gigaset_capi_ctr *iif,
+			   struct gigaset_capi_appl *ap,
+			   struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	if (printk_timed_ratelimit(&ignored_msg_dump_time, 30 * 1000))
+		dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
+}
+
+/*
+ * CAPI message handler: no-op
+ */
+static void do_nothing(struct gigaset_capi_ctr *iif,
+		       struct gigaset_capi_appl *ap,
+		       struct sk_buff *skb)
+{
+	if (printk_timed_ratelimit(&ignored_msg_dump_time, 30 * 1000)) {
+		/* decode message */
+		capi_message2cmsg(&iif->acmsg, skb->data);
+		dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	}
+	dev_kfree_skb_any(skb);
+}
+
+static void do_data_b3_resp(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	dump_rawmsg(DEBUG_LLDATA, __func__, skb->data);
+	dev_kfree_skb_any(skb);
+}
+
+/* table of outgoing CAPI message handlers with lookup function */
+typedef void (*capi_send_handler_t)(struct gigaset_capi_ctr *,
+				    struct gigaset_capi_appl *,
+				    struct sk_buff *);
+
+static struct {
+	u16 cmd;
+	capi_send_handler_t handler;
+} capi_send_handler_table[] = {
+	/* most frequent messages first for faster lookup */
+	{ CAPI_DATA_B3_REQ, do_data_b3_req },
+	{ CAPI_DATA_B3_RESP, do_data_b3_resp },
+
+	{ CAPI_ALERT_REQ, do_alert_req },
+	{ CAPI_CONNECT_ACTIVE_RESP, do_nothing },
+	{ CAPI_CONNECT_B3_ACTIVE_RESP, do_nothing },
+	{ CAPI_CONNECT_B3_REQ, do_connect_b3_req },
+	{ CAPI_CONNECT_B3_RESP, do_connect_b3_resp },
+	{ CAPI_CONNECT_B3_T90_ACTIVE_RESP, do_nothing },
+	{ CAPI_CONNECT_REQ, do_connect_req },
+	{ CAPI_CONNECT_RESP, do_connect_resp },
+	{ CAPI_DISCONNECT_B3_REQ, do_disconnect_b3_req },
+	{ CAPI_DISCONNECT_B3_RESP, do_nothing },
+	{ CAPI_DISCONNECT_REQ, do_disconnect_req },
+	{ CAPI_DISCONNECT_RESP, do_nothing },
+	{ CAPI_FACILITY_REQ, do_facility_req },
+	{ CAPI_FACILITY_RESP, do_nothing },
+	{ CAPI_LISTEN_REQ, do_listen_req },
+	{ CAPI_SELECT_B_PROTOCOL_REQ, do_unsupported },
+	{ CAPI_RESET_B3_REQ, do_reset_b3_req },
+	{ CAPI_RESET_B3_RESP, do_nothing },
+
+	/*
+	 * ToDo: support overlap sending (requires ev-layer state
+	 * machine extension to generate additional ATD commands)
+	 */
+	{ CAPI_INFO_REQ, do_unsupported },
+	{ CAPI_INFO_RESP, do_nothing },
+
+	/*
+	 * ToDo: what's the proper response for these?
+	 */
+	{ CAPI_MANUFACTURER_REQ, do_nothing },
+	{ CAPI_MANUFACTURER_RESP, do_nothing },
+};
+
+/* look up handler */
+static inline capi_send_handler_t lookup_capi_send_handler(const u16 cmd)
+{
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(capi_send_handler_table); i++)
+		if (capi_send_handler_table[i].cmd == cmd)
+			return capi_send_handler_table[i].handler;
+	return NULL;
+}
+
+
+/**
+ * gigaset_send_message() - accept a CAPI message from an application
+ * @ctr:	controller descriptor structure.
+ * @skb:	CAPI message.
+ *
+ * Return value: CAPI error code
+ * Note: capidrv (and probably others, too) only uses the return value to
+ * decide whether it has to free the skb (only if result != CAPI_NOERROR (0))
+ */
+static u16 gigaset_send_message(struct capi_ctr *ctr, struct sk_buff *skb)
+{
+	struct gigaset_capi_ctr *iif
+		= container_of(ctr, struct gigaset_capi_ctr, ctr);
+	struct cardstate *cs = ctr->driverdata;
+	struct gigaset_capi_appl *ap;
+	capi_send_handler_t handler;
+
+	/* can only handle linear sk_buffs */
+	if (skb_linearize(skb) < 0) {
+		dev_warn(cs->dev, "%s: skb_linearize failed\n", __func__);
+		return CAPI_MSGOSRESOURCEERR;
+	}
+
+	/* retrieve application data structure */
+	ap = get_appl(iif, CAPIMSG_APPID(skb->data));
+	if (!ap) {
+		dev_notice(cs->dev, "%s: application %u not registered\n",
+			   __func__, CAPIMSG_APPID(skb->data));
+		return CAPI_ILLAPPNR;
+	}
+
+	/* look up command */
+	handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data));
+	if (!handler) {
+		/* unknown/unsupported message type */
+		if (printk_ratelimit())
+			dev_notice(cs->dev, "%s: unsupported message %u\n",
+				   __func__, CAPIMSG_CMD(skb->data));
+		return CAPI_ILLCMDORSUBCMDORMSGTOSMALL;
+	}
+
+	/* serialize */
+	if (atomic_add_return(1, &iif->sendqlen) > 1) {
+		/* queue behind other messages */
+		skb_queue_tail(&iif->sendqueue, skb);
+		return CAPI_NOERROR;
+	}
+
+	/* process message */
+	handler(iif, ap, skb);
+
+	/* process other messages arrived in the meantime */
+	while (atomic_sub_return(1, &iif->sendqlen) > 0) {
+		skb = skb_dequeue(&iif->sendqueue);
+		if (!skb) {
+			/* should never happen */
+			dev_err(cs->dev, "%s: send queue empty\n", __func__);
+			continue;
+		}
+		ap = get_appl(iif, CAPIMSG_APPID(skb->data));
+		if (!ap) {
+			/* could that happen? */
+			dev_warn(cs->dev, "%s: application %u vanished\n",
+				 __func__, CAPIMSG_APPID(skb->data));
+			continue;
+		}
+		handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data));
+		if (!handler) {
+			/* should never happen */
+			dev_err(cs->dev, "%s: handler %x vanished\n",
+				__func__, CAPIMSG_CMD(skb->data));
+			continue;
+		}
+		handler(iif, ap, skb);
+	}
+
+	return CAPI_NOERROR;
+}
+
+/**
+ * gigaset_procinfo() - build single line description for controller
+ * @ctr:	controller descriptor structure.
+ *
+ * Return value: pointer to generated string (null terminated)
+ */
+static char *gigaset_procinfo(struct capi_ctr *ctr)
+{
+	return ctr->name;	/* ToDo: more? */
+}
+
+/**
+ * gigaset_ctr_read_proc() - build controller proc file entry
+ * @page:	buffer of PAGE_SIZE bytes for receiving the entry.
+ * @start:	unused.
+ * @off:	unused.
+ * @count:	unused.
+ * @eof:	unused.
+ * @ctr:	controller descriptor structure.
+ *
+ * Return value: length of generated entry
+ */
+static int gigaset_ctr_read_proc(char *page, char **start, off_t off,
+			  int count, int *eof, struct capi_ctr *ctr)
+{
+	struct cardstate *cs = ctr->driverdata;
+	char *s;
+	int i;
+	int len = 0;
+	len += sprintf(page+len, "%-16s %s\n", "name", ctr->name);
+	len += sprintf(page+len, "%-16s %s %s\n", "dev",
+			dev_driver_string(cs->dev), dev_name(cs->dev));
+	len += sprintf(page+len, "%-16s %d\n", "id", cs->myid);
+	if (cs->gotfwver)
+		len += sprintf(page+len, "%-16s %d.%d.%d.%d\n", "firmware",
+			cs->fwver[0], cs->fwver[1], cs->fwver[2], cs->fwver[3]);
+	len += sprintf(page+len, "%-16s %d\n", "channels",
+			cs->channels);
+	len += sprintf(page+len, "%-16s %s\n", "onechannel",
+			cs->onechannel ? "yes" : "no");
+
+	switch (cs->mode) {
+	case M_UNKNOWN:
+		s = "unknown";
+		break;
+	case M_CONFIG:
+		s = "config";
+		break;
+	case M_UNIMODEM:
+		s = "Unimodem";
+		break;
+	case M_CID:
+		s = "CID";
+		break;
+	default:
+		s = "??";
+	}
+	len += sprintf(page+len, "%-16s %s\n", "mode", s);
+
+	switch (cs->mstate) {
+	case MS_UNINITIALIZED:
+		s = "uninitialized";
+		break;
+	case MS_INIT:
+		s = "init";
+		break;
+	case MS_LOCKED:
+		s = "locked";
+		break;
+	case MS_SHUTDOWN:
+		s = "shutdown";
+		break;
+	case MS_RECOVER:
+		s = "recover";
+		break;
+	case MS_READY:
+		s = "ready";
+		break;
+	default:
+		s = "??";
+	}
+	len += sprintf(page+len, "%-16s %s\n", "mstate", s);
+
+	len += sprintf(page+len, "%-16s %s\n", "running",
+			cs->running ? "yes" : "no");
+	len += sprintf(page+len, "%-16s %s\n", "connected",
+			cs->connected ? "yes" : "no");
+	len += sprintf(page+len, "%-16s %s\n", "isdn_up",
+			cs->isdn_up ? "yes" : "no");
+	len += sprintf(page+len, "%-16s %s\n", "cidmode",
+			cs->cidmode ? "yes" : "no");
+
+	for (i = 0; i < cs->channels; i++) {
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "corrupted",
+				cs->bcs[i].corrupted);
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "trans_down",
+				cs->bcs[i].trans_down);
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "trans_up",
+				cs->bcs[i].trans_up);
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "chstate",
+				cs->bcs[i].chstate);
+		switch (cs->bcs[i].proto2) {
+		case L2_BITSYNC:
+			s = "bitsync";
+			break;
+		case L2_HDLC:
+			s = "HDLC";
+			break;
+		case L2_VOICE:
+			s = "voice";
+			break;
+		default:
+			s = "??";
+		}
+		len += sprintf(page+len, "[%d]%-13s %s\n", i, "proto2", s);
+	}
+	return len;
+}
+
+
+static struct capi_driver capi_driver_gigaset = {
+	.name		= "gigaset",
+	.revision	= "1.0",
+};
+
+/**
+ * gigaset_isdn_register() - register to LL
+ * @cs:		device descriptor structure.
+ * @isdnid:	device name.
+ *
+ * Called by main module to register the device with the LL.
+ *
+ * Return value: 1 for success, 0 for failure
+ */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+{
+	struct gigaset_capi_ctr *iif;
+	int rc;
+
+	pr_info("Kernel CAPI interface\n");
+
+	iif = kmalloc(sizeof(*iif), GFP_KERNEL);
+	if (!iif) {
+		pr_err("%s: out of memory\n", __func__);
+		return 0;
+	}
+
+	/* register driver with CAPI (ToDo: what for?) */
+	register_capi_driver(&capi_driver_gigaset);
+
+	/* prepare controller structure */
+	iif->ctr.owner         = THIS_MODULE;
+	iif->ctr.driverdata    = cs;
+	strncpy(iif->ctr.name, isdnid, sizeof(iif->ctr.name));
+	iif->ctr.driver_name   = "gigaset";
+	iif->ctr.load_firmware = gigaset_load_firmware;
+	iif->ctr.reset_ctr     = gigaset_reset_ctr;
+	iif->ctr.register_appl = gigaset_register_appl;
+	iif->ctr.release_appl  = gigaset_release_appl;
+	iif->ctr.send_message  = gigaset_send_message;
+	iif->ctr.procinfo      = gigaset_procinfo;
+	iif->ctr.ctr_read_proc = gigaset_ctr_read_proc;
+	INIT_LIST_HEAD(&iif->appls);
+	skb_queue_head_init(&iif->sendqueue);
+	atomic_set(&iif->sendqlen, 0);
+
+	/* register controller with CAPI */
+	rc = attach_capi_ctr(&iif->ctr);
+	if (rc) {
+		pr_err("attach_capi_ctr failed (%d)\n", rc);
+		unregister_capi_driver(&capi_driver_gigaset);
+		kfree(iif);
+		return 0;
+	}
+
+	cs->iif = iif;
+	cs->hw_hdr_len = CAPI_DATA_B3_REQ_LEN;
+	return 1;
+}
+
+/**
+ * gigaset_isdn_unregister() - unregister from LL
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to unregister the device from the LL.
+ */
+void gigaset_isdn_unregister(struct cardstate *cs)
+{
+	struct gigaset_capi_ctr *iif = cs->iif;
+
+	detach_capi_ctr(&iif->ctr);
+	kfree(iif);
+	cs->iif = NULL;
+	unregister_capi_driver(&capi_driver_gigaset);
+}
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 33dcd8d..82ed1cd 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -108,7 +108,7 @@
 {
 	int i, r;
 
-	cs->control_state = TIOCM_RTS; //FIXME
+	cs->control_state = TIOCM_RTS;
 
 	r = setflags(cs, TIOCM_DTR, 200);
 	if (r < 0)
@@ -132,10 +132,10 @@
 
 error:
 	dev_err(cs->dev, "error %d on setuartbits\n", -r);
-	cs->control_state = TIOCM_RTS|TIOCM_DTR; // FIXME is this a good value?
+	cs->control_state = TIOCM_RTS|TIOCM_DTR;
 	cs->ops->set_modem_ctrl(cs, 0, TIOCM_RTS|TIOCM_DTR);
 
-	return -1; //r
+	return -1;
 }
 
 static int test_timeout(struct at_state_t *at_state)
@@ -150,10 +150,9 @@
 	}
 
 	if (!gigaset_add_event(at_state->cs, at_state, EV_TIMEOUT, NULL,
-			       at_state->timer_index, NULL)) {
-		//FIXME what should we do?
-	}
-
+			       at_state->timer_index, NULL))
+			dev_err(at_state->cs->dev, "%s: out of memory\n",
+				__func__);
 	return 1;
 }
 
@@ -207,6 +206,32 @@
 	return 1;
 }
 
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&cs->lock, flags);
+	if (!try_module_get(cs->driver->owner)) {
+		gig_dbg(DEBUG_ANY,
+			"could not get module for allocating channel");
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return NULL;
+	}
+	for (i = 0; i < cs->channels; ++i)
+		if (!cs->bcs[i].use_count) {
+			++cs->bcs[i].use_count;
+			cs->bcs[i].busy = 1;
+			spin_unlock_irqrestore(&cs->lock, flags);
+			gig_dbg(DEBUG_ANY, "allocated channel %d", i);
+			return cs->bcs + i;
+		}
+	module_put(cs->driver->owner);
+	spin_unlock_irqrestore(&cs->lock, flags);
+	gig_dbg(DEBUG_ANY, "no free channel");
+	return NULL;
+}
+
 void gigaset_free_channel(struct bc_state *bcs)
 {
 	unsigned long flags;
@@ -367,16 +392,15 @@
 	int i;
 
 	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->hw", bcs->channel);
-	if (!bcs->cs->ops->freebcshw(bcs)) {
+	if (!bcs->cs->ops->freebcshw(bcs))
 		gig_dbg(DEBUG_INIT, "failed");
-	}
 
 	gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
 	clear_at_state(&bcs->at_state);
 	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
+	dev_kfree_skb(bcs->skb);
+	bcs->skb = NULL;
 
-	if (bcs->skb)
-		dev_kfree_skb(bcs->skb);
 	for (i = 0; i < AT_NUM; ++i) {
 		kfree(bcs->commands[i]);
 		bcs->commands[i] = NULL;
@@ -463,6 +487,12 @@
 
 	switch (cs->cs_init) {
 	default:
+		/* clear B channel structures */
+		for (i = 0; i < cs->channels; ++i) {
+			gig_dbg(DEBUG_INIT, "clearing bcs[%d]", i);
+			gigaset_freebcs(cs->bcs + i);
+		}
+
 		/* clear device sysfs */
 		gigaset_free_dev_sysfs(cs);
 
@@ -471,28 +501,20 @@
 		gig_dbg(DEBUG_INIT, "clearing hw");
 		cs->ops->freecshw(cs);
 
-		//FIXME cmdbuf
-
 		/* fall through */
 	case 2: /* error in initcshw */
 		/* Deregister from LL */
 		make_invalid(cs, VALID_ID);
-		gig_dbg(DEBUG_INIT, "clearing iif");
-		gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
+		gigaset_isdn_unregister(cs);
 
 		/* fall through */
-	case 1: /* error when regestering to LL */
+	case 1: /* error when registering to LL */
 		gig_dbg(DEBUG_INIT, "clearing at_state");
 		clear_at_state(&cs->at_state);
 		dealloc_at_states(cs);
 
 		/* fall through */
-	case 0: /* error in one call to initbcs */
-		for (i = 0; i < cs->channels; ++i) {
-			gig_dbg(DEBUG_INIT, "clearing bcs[%d]", i);
-			gigaset_freebcs(cs->bcs + i);
-		}
-
+	case 0:	/* error in basic setup */
 		clear_events(cs);
 		gig_dbg(DEBUG_INIT, "freeing inbuf");
 		kfree(cs->inbuf);
@@ -534,16 +556,13 @@
 }
 
 
-static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct bc_state *bcs,
-			       struct cardstate *cs, int inputstate)
+static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct cardstate *cs)
 /* inbuf->read must be allocated before! */
 {
 	inbuf->head = 0;
 	inbuf->tail = 0;
 	inbuf->cs = cs;
-	inbuf->bcs = bcs; /*base driver: NULL*/
-	inbuf->rcvbuf = NULL;
-	inbuf->inputstate = inputstate;
+	inbuf->inputstate = INS_command;
 }
 
 /**
@@ -599,7 +618,7 @@
 {
 	int i;
 
-	bcs->tx_skb = NULL; //FIXME -> hw part
+	bcs->tx_skb = NULL;
 
 	skb_queue_head_init(&bcs->squeue);
 
@@ -618,13 +637,13 @@
 	bcs->fcs = PPP_INITFCS;
 	bcs->inputstate = 0;
 	if (cs->ignoreframes) {
-		bcs->inputstate |= INS_skip_frame;
 		bcs->skb = NULL;
-	} else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-		skb_reserve(bcs->skb, HW_HDR_LEN);
-	else {
-		pr_err("out of memory\n");
-		bcs->inputstate |= INS_skip_frame;
+	} else {
+		bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
+		if (bcs->skb != NULL)
+			skb_reserve(bcs->skb, cs->hw_hdr_len);
+		else
+			pr_err("out of memory\n");
 	}
 
 	bcs->channel = channel;
@@ -645,8 +664,8 @@
 	gig_dbg(DEBUG_INIT, "  failed");
 
 	gig_dbg(DEBUG_INIT, "  freeing bcs[%d]->skb", channel);
-	if (bcs->skb)
-		dev_kfree_skb(bcs->skb);
+	dev_kfree_skb(bcs->skb);
+	bcs->skb = NULL;
 
 	return NULL;
 }
@@ -673,12 +692,13 @@
 				 int onechannel, int ignoreframes,
 				 int cidmode, const char *modulename)
 {
-	struct cardstate *cs = NULL;
+	struct cardstate *cs;
 	unsigned long flags;
 	int i;
 
 	gig_dbg(DEBUG_INIT, "allocating cs");
-	if (!(cs = alloc_cs(drv))) {
+	cs = alloc_cs(drv);
+	if (!cs) {
 		pr_err("maximum number of devices exceeded\n");
 		return NULL;
 	}
@@ -707,7 +727,7 @@
 	cs->ev_tail = 0;
 	cs->ev_head = 0;
 
-	tasklet_init(&cs->event_tasklet, &gigaset_handle_event,
+	tasklet_init(&cs->event_tasklet, gigaset_handle_event,
 		     (unsigned long) cs);
 	cs->commands_pending = 0;
 	cs->cur_at_seq = 0;
@@ -726,14 +746,6 @@
 	cs->mode = M_UNKNOWN;
 	cs->mstate = MS_UNINITIALIZED;
 
-	for (i = 0; i < channels; ++i) {
-		gig_dbg(DEBUG_INIT, "setting up bcs[%d].read", i);
-		if (!gigaset_initbcs(cs->bcs + i, cs, i)) {
-			pr_err("could not allocate channel %d data\n", i);
-			goto error;
-		}
-	}
-
 	++cs->cs_init;
 
 	gig_dbg(DEBUG_INIT, "setting up at_state");
@@ -743,10 +755,7 @@
 	cs->cbytes = 0;
 
 	gig_dbg(DEBUG_INIT, "setting up inbuf");
-	if (onechannel) {			//FIXME distinction necessary?
-		gigaset_inbuf_init(cs->inbuf, cs->bcs, cs, INS_command);
-	} else
-		gigaset_inbuf_init(cs->inbuf, NULL,    cs, INS_command);
+	gigaset_inbuf_init(cs->inbuf, cs);
 
 	cs->connected = 0;
 	cs->isdn_up = 0;
@@ -758,7 +767,7 @@
 	cs->cmdbytes = 0;
 
 	gig_dbg(DEBUG_INIT, "setting up iif");
-	if (!gigaset_register_to_LL(cs, modulename)) {
+	if (!gigaset_isdn_register(cs, modulename)) {
 		pr_err("error registering ISDN device\n");
 		goto error;
 	}
@@ -777,6 +786,15 @@
 	/* set up device sysfs */
 	gigaset_init_dev_sysfs(cs);
 
+	/* set up channel data structures */
+	for (i = 0; i < channels; ++i) {
+		gig_dbg(DEBUG_INIT, "setting up bcs[%d]", i);
+		if (!gigaset_initbcs(cs->bcs + i, cs, i)) {
+			pr_err("could not allocate channel %d data\n", i);
+			goto error;
+		}
+	}
+
 	spin_lock_irqsave(&cs->lock, flags);
 	cs->running = 1;
 	spin_unlock_irqrestore(&cs->lock, flags);
@@ -824,9 +842,10 @@
 	bcs->chstate = 0;
 
 	bcs->ignore = cs->ignoreframes;
-	if (bcs->ignore)
-		bcs->inputstate |= INS_skip_frame;
-
+	if (bcs->ignore) {
+		dev_kfree_skb(bcs->skb);
+		bcs->skb = NULL;
+	}
 
 	cs->ops->reinitbcshw(bcs);
 }
@@ -847,8 +866,6 @@
 	free_strings(&cs->at_state);
 	gigaset_at_init(&cs->at_state, NULL, cs, 0);
 
-	kfree(cs->inbuf->rcvbuf);
-	cs->inbuf->rcvbuf = NULL;
 	cs->inbuf->inputstate = INS_command;
 	cs->inbuf->head = 0;
 	cs->inbuf->tail = 0;
@@ -911,15 +928,13 @@
 		cs->ops->baud_rate(cs, B115200);
 		cs->ops->set_line_ctrl(cs, CS8);
 		cs->control_state = TIOCM_DTR|TIOCM_RTS;
-	} else {
-		//FIXME use some saved values?
 	}
 
 	cs->waiting = 1;
 
 	if (!gigaset_add_event(cs, &cs->at_state, EV_START, NULL, 0, NULL)) {
 		cs->waiting = 0;
-		//FIXME what should we do?
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		goto error;
 	}
 
@@ -959,7 +974,7 @@
 	cs->waiting = 1;
 
 	if (!gigaset_add_event(cs, &cs->at_state, EV_SHUTDOWN, NULL, 0, NULL)) {
-		//FIXME what should we do?
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		goto exit;
 	}
 
@@ -990,7 +1005,7 @@
 	cs->waiting = 1;
 
 	if (!gigaset_add_event(cs, &cs->at_state, EV_STOP, NULL, 0, NULL)) {
-		//FIXME what should we do?
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		goto exit;
 	}
 
diff --git a/drivers/isdn/gigaset/dummyll.c b/drivers/isdn/gigaset/dummyll.c
new file mode 100644
index 0000000..5b27c99
--- /dev/null
+++ b/drivers/isdn/gigaset/dummyll.c
@@ -0,0 +1,68 @@
+/*
+ * Dummy LL interface for the Gigaset driver
+ *
+ * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
+ *
+ * =====================================================================
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+
+void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
+{
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_sent);
+
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
+{
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
+
+void gigaset_isdn_rcv_err(struct bc_state *bcs)
+{
+}
+EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
+
+int gigaset_isdn_icall(struct at_state_t *at_state)
+{
+	return ICALL_IGNORE;
+}
+
+void gigaset_isdn_connD(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_hupD(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_connB(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_hupB(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_start(struct cardstate *cs)
+{
+}
+
+void gigaset_isdn_stop(struct cardstate *cs)
+{
+}
+
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+{
+	pr_info("no ISDN subsystem interface\n");
+	return 1;
+}
+
+void gigaset_isdn_unregister(struct cardstate *cs)
+{
+}
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index cc768ca..ddeb045 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -40,8 +40,8 @@
 
 /* Possible ASCII responses */
 #define RSP_OK		0
-//#define RSP_BUSY	1
-//#define RSP_CONNECT	2
+#define RSP_BUSY	1
+#define RSP_CONNECT	2
 #define RSP_ZGCI	3
 #define RSP_RING	4
 #define RSP_ZAOC	5
@@ -68,7 +68,6 @@
 #define RSP_ZHLC	(RSP_STR + STR_ZHLC)
 #define RSP_ERROR	-1	/* ERROR              */
 #define RSP_WRONG_CID	-2	/* unknown cid in cmd */
-//#define RSP_EMPTY	-3
 #define RSP_UNKNOWN	-4	/* unknown response   */
 #define RSP_FAIL	-5	/* internal error     */
 #define RSP_INVAL	-6	/* invalid response   */
@@ -76,9 +75,9 @@
 #define RSP_NONE	-19
 #define RSP_STRING	-20
 #define RSP_NULL	-21
-//#define RSP_RETRYFAIL	-22
-//#define RSP_RETRY	-23
-//#define RSP_SKIP	-24
+#define RSP_RETRYFAIL	-22
+#define RSP_RETRY	-23
+#define RSP_SKIP	-24
 #define RSP_INIT	-27
 #define RSP_ANY		-26
 #define RSP_LAST	-28
@@ -127,7 +126,6 @@
 #define ACT_NOTIFY_BC_UP	39
 #define ACT_DIAL		40
 #define ACT_ACCEPT		41
-#define ACT_PROTO_L2		42
 #define ACT_HUP			43
 #define ACT_IF_LOCK		44
 #define ACT_START		45
@@ -159,229 +157,229 @@
 #define SEQ_UMMODE	11
 
 
-// 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring
+/* 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid),
+ * 400: hup, 500: reset, 600: dial, 700: ring */
 struct reply_t gigaset_tab_nocid[] =
 {
-	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
+/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout,
+ * action, command */
 
-	/* initialize device, set cid mode if possible */
-	//{RSP_INIT,     -1, -1,100,                900, 0, {ACT_TEST}},
-	//{RSP_ERROR,   900,900, -1,                  0, 0, {ACT_FAILINIT}},
-	//{RSP_OK,      900,900, -1,                100, INIT_TIMEOUT,
-	//                                                  {ACT_TIMEOUT}},
+/* initialize device, set cid mode if possible */
+{RSP_INIT,	 -1,  -1, SEQ_INIT,		100,  1, {ACT_TIMEOUT} },
 
-	{RSP_INIT,     -1, -1,SEQ_INIT,           100, INIT_TIMEOUT,
-							  {ACT_TIMEOUT}},                /* wait until device is ready */
+{EV_TIMEOUT,	100, 100, -1,			101,  3, {0},	"Z\r"},
+{RSP_OK,	101, 103, -1,			120,  5, {ACT_GETSTRING},
+								"+GMR\r"},
 
-	{EV_TIMEOUT,  100,100, -1,                101, 3, {0},             "Z\r"},       /* device in transparent mode? try to initialize it. */
-	{RSP_OK,      101,103, -1,                120, 5, {ACT_GETSTRING}, "+GMR\r"},    /* get version */
+{EV_TIMEOUT,	101, 101, -1,			102,  5, {0},	"Z\r"},
+{RSP_ERROR,	101, 101, -1,			102,  5, {0},	"Z\r"},
 
-	{EV_TIMEOUT,  101,101, -1,                102, 5, {0},             "Z\r"},       /* timeout => try once again. */
-	{RSP_ERROR,   101,101, -1,                102, 5, {0},             "Z\r"},       /* error => try once again. */
+{EV_TIMEOUT,	102, 102, -1,			108,  5, {ACT_SETDLE1},
+								"^SDLE=0\r"},
+{RSP_OK,	108, 108, -1,			104, -1},
+{RSP_ZDLE,	104, 104,  0,			103,  5, {0},	"Z\r"},
+{EV_TIMEOUT,	104, 104, -1,			  0,  0, {ACT_FAILINIT} },
+{RSP_ERROR,	108, 108, -1,			  0,  0, {ACT_FAILINIT} },
 
-	{EV_TIMEOUT,  102,102, -1,                108, 5, {ACT_SETDLE1},   "^SDLE=0\r"}, /* timeout => try again in DLE mode. */
-	{RSP_OK,      108,108, -1,                104,-1},
-	{RSP_ZDLE,    104,104,  0,                103, 5, {0},             "Z\r"},
-	{EV_TIMEOUT,  104,104, -1,                  0, 0, {ACT_FAILINIT}},
-	{RSP_ERROR,   108,108, -1,                  0, 0, {ACT_FAILINIT}},
+{EV_TIMEOUT,	108, 108, -1,			105,  2, {ACT_SETDLE0,
+							  ACT_HUPMODEM,
+							  ACT_TIMEOUT} },
+{EV_TIMEOUT,	105, 105, -1,			103,  5, {0},	"Z\r"},
 
-	{EV_TIMEOUT,  108,108, -1,                105, 2, {ACT_SETDLE0,
-							   ACT_HUPMODEM,
-							   ACT_TIMEOUT}},                /* still timeout => connection in unimodem mode? */
-	{EV_TIMEOUT,  105,105, -1,                103, 5, {0},             "Z\r"},
+{RSP_ERROR,	102, 102, -1,			107,  5, {0},	"^GETPRE\r"},
+{RSP_OK,	107, 107, -1,			  0,  0, {ACT_CONFIGMODE} },
+{RSP_ERROR,	107, 107, -1,			  0,  0, {ACT_FAILINIT} },
+{EV_TIMEOUT,	107, 107, -1,			  0,  0, {ACT_FAILINIT} },
 
-	{RSP_ERROR,   102,102, -1,                107, 5, {0},             "^GETPRE\r"}, /* ERROR on ATZ => maybe in config mode? */
-	{RSP_OK,      107,107, -1,                  0, 0, {ACT_CONFIGMODE}},
-	{RSP_ERROR,   107,107, -1,                  0, 0, {ACT_FAILINIT}},
-	{EV_TIMEOUT,  107,107, -1,                  0, 0, {ACT_FAILINIT}},
+{RSP_ERROR,	103, 103, -1,			  0,  0, {ACT_FAILINIT} },
+{EV_TIMEOUT,	103, 103, -1,			  0,  0, {ACT_FAILINIT} },
 
-	{RSP_ERROR,   103,103, -1,                  0, 0, {ACT_FAILINIT}},
-	{EV_TIMEOUT,  103,103, -1,                  0, 0, {ACT_FAILINIT}},
+{RSP_STRING,	120, 120, -1,			121, -1, {ACT_SETVER} },
 
-	{RSP_STRING,  120,120, -1,                121,-1, {ACT_SETVER}},
+{EV_TIMEOUT,	120, 121, -1,			  0,  0, {ACT_FAILVER,
+							  ACT_INIT} },
+{RSP_ERROR,	120, 121, -1,			  0,  0, {ACT_FAILVER,
+							  ACT_INIT} },
+{RSP_OK,	121, 121, -1,			  0,  0, {ACT_GOTVER,
+							  ACT_INIT} },
 
-	{EV_TIMEOUT,  120,121, -1,                  0, 0, {ACT_FAILVER, ACT_INIT}},
-	{RSP_ERROR,   120,121, -1,                  0, 0, {ACT_FAILVER, ACT_INIT}},
-	{RSP_OK,      121,121, -1,                  0, 0, {ACT_GOTVER,  ACT_INIT}},
+/* leave dle mode */
+{RSP_INIT,	  0,   0, SEQ_DLE0,		201,  5, {0},	"^SDLE=0\r"},
+{RSP_OK,	201, 201, -1,			202, -1},
+{RSP_ZDLE,	202, 202,  0,			  0,  0, {ACT_DLE0} },
+{RSP_NODEV,	200, 249, -1,			  0,  0, {ACT_FAKEDLE0} },
+{RSP_ERROR,	200, 249, -1,			  0,  0, {ACT_FAILDLE0} },
+{EV_TIMEOUT,	200, 249, -1,			  0,  0, {ACT_FAILDLE0} },
 
-	/* leave dle mode */
-	{RSP_INIT,      0,  0,SEQ_DLE0,           201, 5, {0},             "^SDLE=0\r"},
-	{RSP_OK,      201,201, -1,                202,-1},
-	{RSP_ZDLE,    202,202,  0,                  0, 0, {ACT_DLE0}},
-	{RSP_NODEV,   200,249, -1,                  0, 0, {ACT_FAKEDLE0}},
-	{RSP_ERROR,   200,249, -1,                  0, 0, {ACT_FAILDLE0}},
-	{EV_TIMEOUT,  200,249, -1,                  0, 0, {ACT_FAILDLE0}},
+/* enter dle mode */
+{RSP_INIT,	  0,   0, SEQ_DLE1,		251,  5, {0},	"^SDLE=1\r"},
+{RSP_OK,	251, 251, -1,			252, -1},
+{RSP_ZDLE,	252, 252,  1,			  0,  0, {ACT_DLE1} },
+{RSP_ERROR,	250, 299, -1,			  0,  0, {ACT_FAILDLE1} },
+{EV_TIMEOUT,	250, 299, -1,			  0,  0, {ACT_FAILDLE1} },
 
-	/* enter dle mode */
-	{RSP_INIT,      0,  0,SEQ_DLE1,           251, 5, {0},             "^SDLE=1\r"},
-	{RSP_OK,      251,251, -1,                252,-1},
-	{RSP_ZDLE,    252,252,  1,                  0, 0, {ACT_DLE1}},
-	{RSP_ERROR,   250,299, -1,                  0, 0, {ACT_FAILDLE1}},
-	{EV_TIMEOUT,  250,299, -1,                  0, 0, {ACT_FAILDLE1}},
+/* incoming call */
+{RSP_RING,	 -1,  -1, -1,			 -1, -1, {ACT_RING} },
 
-	/* incoming call */
-	{RSP_RING,     -1, -1, -1,                 -1,-1, {ACT_RING}},
+/* get cid */
+{RSP_INIT,	  0,   0, SEQ_CID,		301,  5, {0},	"^SGCI?\r"},
+{RSP_OK,	301, 301, -1,			302, -1},
+{RSP_ZGCI,	302, 302, -1,			  0,  0, {ACT_CID} },
+{RSP_ERROR,	301, 349, -1,			  0,  0, {ACT_FAILCID} },
+{EV_TIMEOUT,	301, 349, -1,			  0,  0, {ACT_FAILCID} },
 
-	/* get cid */
-	//{RSP_INIT,      0,  0,300,                901, 0, {ACT_TEST}},
-	//{RSP_ERROR,   901,901, -1,                  0, 0, {ACT_FAILCID}},
-	//{RSP_OK,      901,901, -1,                301, 5, {0},             "^SGCI?\r"},
+/* enter cid mode */
+{RSP_INIT,	  0,   0, SEQ_CIDMODE,		150,  5, {0},	"^SGCI=1\r"},
+{RSP_OK,	150, 150, -1,			  0,  0, {ACT_CMODESET} },
+{RSP_ERROR,	150, 150, -1,			  0,  0, {ACT_FAILCMODE} },
+{EV_TIMEOUT,	150, 150, -1,			  0,  0, {ACT_FAILCMODE} },
 
-	{RSP_INIT,      0,  0,SEQ_CID,            301, 5, {0},             "^SGCI?\r"},
-	{RSP_OK,      301,301, -1,                302,-1},
-	{RSP_ZGCI,    302,302, -1,                  0, 0, {ACT_CID}},
-	{RSP_ERROR,   301,349, -1,                  0, 0, {ACT_FAILCID}},
-	{EV_TIMEOUT,  301,349, -1,                  0, 0, {ACT_FAILCID}},
+/* leave cid mode */
+{RSP_INIT,	  0,   0, SEQ_UMMODE,		160,  5, {0},	"Z\r"},
+{RSP_OK,	160, 160, -1,			  0,  0, {ACT_UMODESET} },
+{RSP_ERROR,	160, 160, -1,			  0,  0, {ACT_FAILUMODE} },
+{EV_TIMEOUT,	160, 160, -1,			  0,  0, {ACT_FAILUMODE} },
 
-	/* enter cid mode */
-	{RSP_INIT,      0,  0,SEQ_CIDMODE,        150, 5, {0},             "^SGCI=1\r"},
-	{RSP_OK,      150,150, -1,                  0, 0, {ACT_CMODESET}},
-	{RSP_ERROR,   150,150, -1,                  0, 0, {ACT_FAILCMODE}},
-	{EV_TIMEOUT,  150,150, -1,                  0, 0, {ACT_FAILCMODE}},
+/* abort getting cid */
+{RSP_INIT,	  0,   0, SEQ_NOCID,		  0,  0, {ACT_ABORTCID} },
 
-	/* leave cid mode */
-	//{RSP_INIT,      0,  0,SEQ_UMMODE,         160, 5, {0},             "^SGCI=0\r"},
-	{RSP_INIT,      0,  0,SEQ_UMMODE,         160, 5, {0},             "Z\r"},
-	{RSP_OK,      160,160, -1,                  0, 0, {ACT_UMODESET}},
-	{RSP_ERROR,   160,160, -1,                  0, 0, {ACT_FAILUMODE}},
-	{EV_TIMEOUT,  160,160, -1,                  0, 0, {ACT_FAILUMODE}},
+/* reset */
+{RSP_INIT,	  0,   0, SEQ_SHUTDOWN,		504,  5, {0},	"Z\r"},
+{RSP_OK,	504, 504, -1,			  0,  0, {ACT_SDOWN} },
+{RSP_ERROR,	501, 599, -1,			  0,  0, {ACT_FAILSDOWN} },
+{EV_TIMEOUT,	501, 599, -1,			  0,  0, {ACT_FAILSDOWN} },
+{RSP_NODEV,	501, 599, -1,			  0,  0, {ACT_FAKESDOWN} },
 
-	/* abort getting cid */
-	{RSP_INIT,      0,  0,SEQ_NOCID,            0, 0, {ACT_ABORTCID}},
+{EV_PROC_CIDMODE, -1, -1, -1,			 -1, -1, {ACT_PROC_CIDMODE} },
+{EV_IF_LOCK,	 -1,  -1, -1,			 -1, -1, {ACT_IF_LOCK} },
+{EV_IF_VER,	 -1,  -1, -1,			 -1, -1, {ACT_IF_VER} },
+{EV_START,	 -1,  -1, -1,			 -1, -1, {ACT_START} },
+{EV_STOP,	 -1,  -1, -1,			 -1, -1, {ACT_STOP} },
+{EV_SHUTDOWN,	 -1,  -1, -1,			 -1, -1, {ACT_SHUTDOWN} },
 
-	/* reset */
-	{RSP_INIT,      0,  0,SEQ_SHUTDOWN,       504, 5, {0},             "Z\r"},
-	{RSP_OK,      504,504, -1,                  0, 0, {ACT_SDOWN}},
-	{RSP_ERROR,   501,599, -1,                  0, 0, {ACT_FAILSDOWN}},
-	{EV_TIMEOUT,  501,599, -1,                  0, 0, {ACT_FAILSDOWN}},
-	{RSP_NODEV,   501,599, -1,                  0, 0, {ACT_FAKESDOWN}},
+/* misc. */
+{RSP_ERROR,	 -1,  -1, -1,			 -1, -1, {ACT_ERROR} },
+{RSP_ZCFGT,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCFG,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZLOG,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZMWI,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZABINFO,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZSMLSTCHG,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
 
-	{EV_PROC_CIDMODE,-1, -1, -1,               -1,-1, {ACT_PROC_CIDMODE}}, //FIXME
-	{EV_IF_LOCK,   -1, -1, -1,                 -1,-1, {ACT_IF_LOCK}}, //FIXME
-	{EV_IF_VER,    -1, -1, -1,                 -1,-1, {ACT_IF_VER}}, //FIXME
-	{EV_START,     -1, -1, -1,                 -1,-1, {ACT_START}}, //FIXME
-	{EV_STOP,      -1, -1, -1,                 -1,-1, {ACT_STOP}}, //FIXME
-	{EV_SHUTDOWN,  -1, -1, -1,                 -1,-1, {ACT_SHUTDOWN}}, //FIXME
-
-	/* misc. */
-	{RSP_ERROR,    -1, -1, -1,                 -1, -1, {ACT_ERROR} },
-	{RSP_EMPTY,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCFGT,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCFG,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZLOG,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZMWI,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZABINFO,  -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZSMLSTCHG,-1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-
-	{RSP_ZCAU,     -1, -1, -1,                 -1,-1, {ACT_ZCAU}},
-	{RSP_NONE,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ANY,      -1, -1, -1,                 -1,-1, {ACT_WARN}},
-	{RSP_LAST}
+{RSP_ZCAU,	 -1,  -1, -1,			 -1, -1, {ACT_ZCAU} },
+{RSP_NONE,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ANY,	 -1,  -1, -1,			 -1, -1, {ACT_WARN} },
+{RSP_LAST}
 };
 
-// 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring, 400: hup, 750: accepted icall
+/* 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring,
+ * 400: hup, 750: accepted icall */
 struct reply_t gigaset_tab_cid[] =
 {
-	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
+/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout,
+ * action, command */
 
-	/* dial */
-	{EV_DIAL,      -1, -1, -1,                 -1,-1, {ACT_DIAL}}, //FIXME
-	{RSP_INIT,      0,  0,SEQ_DIAL,           601, 5, {ACT_CMD+AT_BC}},
-	{RSP_OK,      601,601, -1,                602, 5, {ACT_CMD+AT_HLC}},
-	{RSP_NULL,    602,602, -1,                603, 5, {ACT_CMD+AT_PROTO}},
-	{RSP_OK,      602,602, -1,                603, 5, {ACT_CMD+AT_PROTO}},
-	{RSP_OK,      603,603, -1,                604, 5, {ACT_CMD+AT_TYPE}},
-	{RSP_OK,      604,604, -1,                605, 5, {ACT_CMD+AT_MSN}},
-	{RSP_OK,      605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_NULL,    605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      606,606, -1,                607, 5, {0}, "+VLS=17\r"},
-	{RSP_OK,      607,607, -1,                608,-1},
-	{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    609, 5, {ACT_CMD+AT_DIAL}},
-	{RSP_OK,      609,609, -1,                650, 0, {ACT_DIALING}},
+/* dial */
+{EV_DIAL,	 -1,  -1, -1,			 -1, -1, {ACT_DIAL} },
+{RSP_INIT,	  0,   0, SEQ_DIAL,		601,  5, {ACT_CMD+AT_BC} },
+{RSP_OK,	601, 601, -1,			602,  5, {ACT_CMD+AT_HLC} },
+{RSP_NULL,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	603, 603, -1,			604,  5, {ACT_CMD+AT_TYPE} },
+{RSP_OK,	604, 604, -1,			605,  5, {ACT_CMD+AT_MSN} },
+{RSP_NULL,	605, 605, -1,			606,  5, {ACT_CMD+AT_CLIP} },
+{RSP_OK,	605, 605, -1,			606,  5, {ACT_CMD+AT_CLIP} },
+{RSP_NULL,	606, 606, -1,			607,  5, {ACT_CMD+AT_ISO} },
+{RSP_OK,	606, 606, -1,			607,  5, {ACT_CMD+AT_ISO} },
+{RSP_OK,	607, 607, -1,			608,  5, {0},	"+VLS=17\r"},
+{RSP_OK,	608, 608, -1,			609, -1},
+{RSP_ZSAU,	609, 609, ZSAU_PROCEEDING,	610,  5, {ACT_CMD+AT_DIAL} },
+{RSP_OK,	610, 610, -1,			650,  0, {ACT_DIALING} },
 
-	{RSP_ERROR,   601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
-	{EV_TIMEOUT,  601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
+{RSP_ERROR,	601, 610, -1,			  0,  0, {ACT_ABORTDIAL} },
+{EV_TIMEOUT,	601, 610, -1,			  0,  0, {ACT_ABORTDIAL} },
 
-	/* optional dialing responses */
-	{EV_BC_OPEN,  650,650, -1,                651,-1},
-	{RSP_ZVLS,    608,651, 17,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCTP,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZSAU,    650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
+/* optional dialing responses */
+{EV_BC_OPEN,	650, 650, -1,			651, -1},
+{RSP_ZVLS,	609, 651, 17,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCTP,	610, 651, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCPN,	610, 651, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZSAU,	650, 651, ZSAU_CALL_DELIVERED,	 -1, -1, {ACT_DEBUG} },
 
-	/* connect */
-	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
-	{RSP_ZSAU,    651,651,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
-							   ACT_NOTIFY_BC_UP}},
-	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
-	{RSP_ZSAU,    751,751,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
-							   ACT_NOTIFY_BC_UP}},
-	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}},
+/* connect */
+{RSP_ZSAU,	650, 650, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT} },
+{RSP_ZSAU,	651, 651, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT,
+							  ACT_NOTIFY_BC_UP} },
+{RSP_ZSAU,	750, 750, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT} },
+{RSP_ZSAU,	751, 751, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT,
+							  ACT_NOTIFY_BC_UP} },
+{EV_BC_OPEN,	800, 800, -1,			800, -1, {ACT_NOTIFY_BC_UP} },
 
-	/* remote hangup */
-	{RSP_ZSAU,    650,651,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
-	{RSP_ZSAU,    750,751,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
-	{RSP_ZSAU,    800,800,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
+/* remote hangup */
+{RSP_ZSAU,	650, 651, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_REMOTEREJECT} },
+{RSP_ZSAU,	750, 751, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_REMOTEHUP} },
+{RSP_ZSAU,	800, 800, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_REMOTEHUP} },
 
-	/* hangup */
-	{EV_HUP,       -1, -1, -1,                 -1,-1, {ACT_HUP}}, //FIXME
-	{RSP_INIT,     -1, -1,SEQ_HUP,            401, 5, {0},             "+VLS=0\r"}, /* hang up */ //-1,-1?
-	{RSP_OK,      401,401, -1,                402, 5},
-	{RSP_ZVLS,    402,402,  0,                403, 5},
-	{RSP_ZSAU,    403, 403, ZSAU_DISCONNECT_REQ, -1, -1, {ACT_DEBUG} },
-	{RSP_ZSAU,    403, 403, ZSAU_NULL,            0,  0, {ACT_DISCONNECT} },
-	{RSP_NODEV,   401, 403, -1,                   0,  0, {ACT_FAKEHUP} },
-	{RSP_ERROR,   401,401, -1,                  0, 0, {ACT_ABORTHUP}},
-	{EV_TIMEOUT,  401,403, -1,                  0, 0, {ACT_ABORTHUP}},
+/* hangup */
+{EV_HUP,	 -1,  -1, -1,			 -1, -1, {ACT_HUP} },
+{RSP_INIT,	 -1,  -1, SEQ_HUP,		401,  5, {0},	"+VLS=0\r"},
+{RSP_OK,	401, 401, -1,			402,  5},
+{RSP_ZVLS,	402, 402,  0,			403,  5},
+{RSP_ZSAU,	403, 403, ZSAU_DISCONNECT_REQ,	 -1, -1, {ACT_DEBUG} },
+{RSP_ZSAU,	403, 403, ZSAU_NULL,		  0,  0, {ACT_DISCONNECT} },
+{RSP_NODEV,	401, 403, -1,			  0,  0, {ACT_FAKEHUP} },
+{RSP_ERROR,	401, 401, -1,			  0,  0, {ACT_ABORTHUP} },
+{EV_TIMEOUT,	401, 403, -1,			  0,  0, {ACT_ABORTHUP} },
 
-	{EV_BC_CLOSED,  0,  0, -1,                  0,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME new constate + timeout
+{EV_BC_CLOSED,	  0,   0, -1,			  0, -1, {ACT_NOTIFY_BC_DOWN} },
 
-	/* ring */
-	{RSP_ZBC,     700,700, -1,                 -1,-1, {0}},
-	{RSP_ZHLC,    700,700, -1,                 -1,-1, {0}},
-	{RSP_NMBR,    700,700, -1,                 -1,-1, {0}},
-	{RSP_ZCPN,    700,700, -1,                 -1,-1, {0}},
-	{RSP_ZCTP,    700,700, -1,                 -1,-1, {0}},
-	{EV_TIMEOUT,  700,700, -1,               720,720, {ACT_ICALL}},
-	{EV_BC_CLOSED,720,720, -1,                  0,-1, {ACT_NOTIFY_BC_DOWN}},
+/* ring */
+{RSP_ZBC,	700, 700, -1,			 -1, -1, {0} },
+{RSP_ZHLC,	700, 700, -1,			 -1, -1, {0} },
+{RSP_NMBR,	700, 700, -1,			 -1, -1, {0} },
+{RSP_ZCPN,	700, 700, -1,			 -1, -1, {0} },
+{RSP_ZCTP,	700, 700, -1,			 -1, -1, {0} },
+{EV_TIMEOUT,	700, 700, -1,			720, 720, {ACT_ICALL} },
+{EV_BC_CLOSED,	720, 720, -1,			  0, -1, {ACT_NOTIFY_BC_DOWN} },
 
-	/*accept icall*/
-	{EV_ACCEPT,    -1, -1, -1,                 -1,-1, {ACT_ACCEPT}}, //FIXME
-	{RSP_INIT,    720,720,SEQ_ACCEPT,         721, 5, {ACT_CMD+AT_PROTO}},
-	{RSP_OK,      721,721, -1,                722, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      722,722, -1,                723, 5, {0},             "+VLS=17\r"}, /* set "Endgeraetemodus" */
-	{RSP_OK,      723,723, -1,                724, 5, {0}},
-	{RSP_ZVLS,    724,724, 17,                750,50, {ACT_ACCEPTED}},
-	{RSP_ERROR,   721,729, -1,                  0, 0, {ACT_ABORTACCEPT}},
-	{EV_TIMEOUT,  721,729, -1,                  0, 0, {ACT_ABORTACCEPT}},
-	{RSP_ZSAU,    700,729,ZSAU_NULL,            0, 0, {ACT_ABORTACCEPT}},
-	{RSP_ZSAU,    700,729,ZSAU_ACTIVE,          0, 0, {ACT_ABORTACCEPT}},
-	{RSP_ZSAU,    700,729,ZSAU_DISCONNECT_IND,  0, 0, {ACT_ABORTACCEPT}},
+/*accept icall*/
+{EV_ACCEPT,	 -1,  -1, -1,			 -1, -1, {ACT_ACCEPT} },
+{RSP_INIT,	720, 720, SEQ_ACCEPT,		721,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	721, 721, -1,			722,  5, {ACT_CMD+AT_ISO} },
+{RSP_OK,	722, 722, -1,			723,  5, {0},	"+VLS=17\r"},
+{RSP_OK,	723, 723, -1,			724,  5, {0} },
+{RSP_ZVLS,	724, 724, 17,			750, 50, {ACT_ACCEPTED} },
+{RSP_ERROR,	721, 729, -1,			  0,  0, {ACT_ABORTACCEPT} },
+{EV_TIMEOUT,	721, 729, -1,			  0,  0, {ACT_ABORTACCEPT} },
+{RSP_ZSAU,	700, 729, ZSAU_NULL,		  0,  0, {ACT_ABORTACCEPT} },
+{RSP_ZSAU,	700, 729, ZSAU_ACTIVE,		  0,  0, {ACT_ABORTACCEPT} },
+{RSP_ZSAU,	700, 729, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_ABORTACCEPT} },
 
-	{EV_BC_OPEN,  750,750, -1,                751,-1},
-	{EV_TIMEOUT,  750,751, -1,                  0, 0, {ACT_CONNTIMEOUT}},
+{EV_BC_OPEN,	750, 750, -1,			751, -1},
+{EV_TIMEOUT,	750, 751, -1,			  0,  0, {ACT_CONNTIMEOUT} },
 
-	/* B channel closed (general case) */
-	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
+/* B channel closed (general case) */
+{EV_BC_CLOSED,	 -1,  -1, -1,			 -1, -1, {ACT_NOTIFY_BC_DOWN} },
 
-	/* misc. */
-	{EV_PROTO_L2,  -1, -1, -1,                 -1,-1, {ACT_PROTO_L2}}, //FIXME
+/* misc. */
+{RSP_ZCON,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCCR,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZAOC,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCSTR,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
 
-	{RSP_ZCON,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCCR,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZAOC,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCSTR,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-
-	{RSP_ZCAU,     -1, -1, -1,                 -1,-1, {ACT_ZCAU}},
-	{RSP_NONE,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ANY,      -1, -1, -1,                 -1,-1, {ACT_WARN}},
-	{RSP_LAST}
+{RSP_ZCAU,	 -1,  -1, -1,			 -1, -1, {ACT_ZCAU} },
+{RSP_NONE,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ANY,	 -1,  -1, -1,			 -1, -1, {ACT_WARN} },
+{RSP_LAST}
 };
 
 
-static const struct resp_type_t resp_type[] =
+static const struct resp_type_t {
+	unsigned char	*response;
+	int		resp_code;
+	int		type;
+} resp_type[] =
 {
-	/*{"",		RSP_EMPTY,	RT_NOTHING},*/
 	{"OK",		RSP_OK,		RT_NOTHING},
 	{"ERROR",	RSP_ERROR,	RT_NOTHING},
 	{"ZSAU",	RSP_ZSAU,	RT_ZSAU},
@@ -405,7 +403,21 @@
 	{"ZLOG",	RSP_ZLOG,	RT_NOTHING},
 	{"ZABINFO",	RSP_ZABINFO,	RT_NOTHING},
 	{"ZSMLSTCHG",	RSP_ZSMLSTCHG,	RT_NOTHING},
-	{NULL,0,0}
+	{NULL,		0,		0}
+};
+
+static const struct zsau_resp_t {
+	unsigned char	*str;
+	int		code;
+} zsau_resp[] =
+{
+	{"OUTGOING_CALL_PROCEEDING",	ZSAU_OUTGOING_CALL_PROCEEDING},
+	{"CALL_DELIVERED",		ZSAU_CALL_DELIVERED},
+	{"ACTIVE",			ZSAU_ACTIVE},
+	{"DISCONNECT_IND",		ZSAU_DISCONNECT_IND},
+	{"NULL",			ZSAU_NULL},
+	{"DISCONNECT_REQ",		ZSAU_DISCONNECT_REQ},
+	{NULL,				ZSAU_UNKNOWN}
 };
 
 /*
@@ -470,7 +482,6 @@
 	if (cid < 1 || cid > 65535)
 		return -1;	/* CID out of range */
 	return cid;
-	//FIXME is ;<digit>+ at end of non-CID response really impossible?
 }
 
 /**
@@ -487,6 +498,7 @@
 	int params;
 	int i, j;
 	const struct resp_type_t *rt;
+	const struct zsau_resp_t *zr;
 	int curarg;
 	unsigned long flags;
 	unsigned next, tail, head;
@@ -613,24 +625,14 @@
 				event->parameter = ZSAU_NONE;
 				break;
 			}
-			if (!strcmp(argv[curarg], "OUTGOING_CALL_PROCEEDING"))
-				event->parameter = ZSAU_OUTGOING_CALL_PROCEEDING;
-			else if (!strcmp(argv[curarg], "CALL_DELIVERED"))
-				event->parameter = ZSAU_CALL_DELIVERED;
-			else if (!strcmp(argv[curarg], "ACTIVE"))
-				event->parameter = ZSAU_ACTIVE;
-			else if (!strcmp(argv[curarg], "DISCONNECT_IND"))
-				event->parameter = ZSAU_DISCONNECT_IND;
-			else if (!strcmp(argv[curarg], "NULL"))
-				event->parameter = ZSAU_NULL;
-			else if (!strcmp(argv[curarg], "DISCONNECT_REQ"))
-				event->parameter = ZSAU_DISCONNECT_REQ;
-			else {
-				event->parameter = ZSAU_UNKNOWN;
+			for (zr = zsau_resp; zr->str; ++zr)
+				if (!strcmp(argv[curarg], zr->str))
+					break;
+			event->parameter = zr->code;
+			if (!zr->str)
 				dev_warn(cs->dev,
 					"%s: unknown parameter %s after ZSAU\n",
 					 __func__, argv[curarg]);
-			}
 			++curarg;
 			break;
 		case RT_STRING:
@@ -714,7 +716,7 @@
 		/* notify LL */
 		if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
 			bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
-			gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+			gigaset_isdn_hupD(bcs);
 		}
 	} else {
 		/* no B channel assigned: just deallocate */
@@ -872,12 +874,12 @@
 {
 	if (bcs->chstate & CHS_B_UP) {
 		bcs->chstate &= ~CHS_B_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP);
+		gigaset_isdn_hupB(bcs);
 	}
 
 	if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
 		bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+		gigaset_isdn_hupD(bcs);
 	}
 
 	gigaset_free_channel(bcs);
@@ -894,15 +896,17 @@
 	}
 
 	bcs->chstate |= CHS_B_UP;
-	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN);
+	gigaset_isdn_connB(bcs);
 }
 
-static void start_dial(struct at_state_t *at_state, void *data, unsigned seq_index)
+static void start_dial(struct at_state_t *at_state, void *data,
+			unsigned seq_index)
 {
 	struct bc_state *bcs = at_state->bcs;
 	struct cardstate *cs = at_state->cs;
-	int retval;
+	char **commands = data;
 	unsigned long flags;
+	int i;
 
 	bcs->chstate |= CHS_NOTIFY_LL;
 
@@ -913,10 +917,10 @@
 	}
 	spin_unlock_irqrestore(&cs->lock, flags);
 
-	retval = gigaset_isdn_setup_dial(at_state, data);
-	if (retval != 0)
-		goto error;
-
+	for (i = 0; i < AT_NUM; ++i) {
+		kfree(bcs->commands[i]);
+		bcs->commands[i] = commands[i];
+	}
 
 	at_state->pending_commands |= PC_CID;
 	gig_dbg(DEBUG_CMD, "Scheduling PC_CID");
@@ -924,6 +928,10 @@
 	return;
 
 error:
+	for (i = 0; i < AT_NUM; ++i) {
+		kfree(commands[i]);
+		commands[i] = NULL;
+	}
 	at_state->pending_commands |= PC_NOCID;
 	gig_dbg(DEBUG_CMD, "Scheduling PC_NOCID");
 	cs->commands_pending = 1;
@@ -933,20 +941,31 @@
 static void start_accept(struct at_state_t *at_state)
 {
 	struct cardstate *cs = at_state->cs;
-	int retval;
+	struct bc_state *bcs = at_state->bcs;
+	int i;
 
-	retval = gigaset_isdn_setup_accept(at_state);
+	for (i = 0; i < AT_NUM; ++i) {
+		kfree(bcs->commands[i]);
+		bcs->commands[i] = NULL;
+	}
 
-	if (retval == 0) {
-		at_state->pending_commands |= PC_ACCEPT;
-		gig_dbg(DEBUG_CMD, "Scheduling PC_ACCEPT");
-		cs->commands_pending = 1;
-	} else {
+	bcs->commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC);
+	bcs->commands[AT_ISO] = kmalloc(9, GFP_ATOMIC);
+	if (!bcs->commands[AT_PROTO] || !bcs->commands[AT_ISO]) {
+		dev_err(at_state->cs->dev, "out of memory\n");
 		/* error reset */
 		at_state->pending_commands |= PC_HUP;
 		gig_dbg(DEBUG_CMD, "Scheduling PC_HUP");
 		cs->commands_pending = 1;
+		return;
 	}
+
+	snprintf(bcs->commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
+	snprintf(bcs->commands[AT_ISO], 9, "^SISO=%u\r", bcs->channel + 1);
+
+	at_state->pending_commands |= PC_ACCEPT;
+	gig_dbg(DEBUG_CMD, "Scheduling PC_ACCEPT");
+	cs->commands_pending = 1;
 }
 
 static void do_start(struct cardstate *cs)
@@ -957,9 +976,7 @@
 		schedule_init(cs, MS_INIT);
 
 	cs->isdn_up = 1;
-	gigaset_i4l_cmd(cs, ISDN_STAT_RUN);
-					// FIXME: not in locked mode
-					// FIXME 2: only after init sequence
+	gigaset_isdn_start(cs);
 
 	cs->waiting = 0;
 	wake_up(&cs->waitqueue);
@@ -975,7 +992,7 @@
 	/* Tell the LL that the device is not available .. */
 	if (cs->isdn_up) {
 		cs->isdn_up = 0;
-		gigaset_i4l_cmd(cs, ISDN_STAT_STOP);
+		gigaset_isdn_stop(cs);
 	}
 
 	/* The rest is done by cleanup_cs () in user mode. */
@@ -1113,7 +1130,6 @@
 
 		break;
 	case MS_LOCKED:
-		//retval = -EACCES;
 		break;
 	default:
 		return -EBUSY;
@@ -1276,7 +1292,7 @@
 			break;
 		}
 		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
+		gigaset_isdn_connD(bcs);
 		cs->ops->init_bchannel(bcs);
 		break;
 	case ACT_DLE1:
@@ -1284,7 +1300,7 @@
 		bcs = cs->bcs + cs->curchannel;
 
 		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
+		gigaset_isdn_connD(bcs);
 		cs->ops->init_bchannel(bcs);
 		break;
 	case ACT_FAKEHUP:
@@ -1369,7 +1385,7 @@
 		cs->cur_at_seq = SEQ_NONE;
 		break;
 
-	case ACT_ABORTACCEPT:	/* hangup/error/timeout during ICALL processing */
+	case ACT_ABORTACCEPT:	/* hangup/error/timeout during ICALL procssng */
 		disconnect(p_at_state);
 		break;
 
@@ -1443,17 +1459,6 @@
 			__func__, at_state->ConState);
 		cs->cur_at_seq = SEQ_NONE;
 		break;
-#ifdef CONFIG_GIGASET_DEBUG
-	case ACT_TEST:
-		{
-			static int count = 3; //2; //1;
-			*p_genresp = 1;
-			*p_resp_code = count ? RSP_ERROR : RSP_OK;
-			if (count > 0)
-				--count;
-		}
-		break;
-#endif
 	case ACT_DEBUG:
 		gig_dbg(DEBUG_ANY, "%s: resp_code %d in ConState %d",
 			__func__, ev->type, at_state->ConState);
@@ -1474,11 +1479,6 @@
 	case ACT_ACCEPT:
 		start_accept(at_state);
 		break;
-	case ACT_PROTO_L2:
-		gig_dbg(DEBUG_CMD, "set protocol to %u",
-			(unsigned) ev->parameter);
-		at_state->bcs->proto2 = ev->parameter;
-		break;
 	case ACT_HUP:
 		at_state->pending_commands |= PC_HUP;
 		cs->commands_pending = 1;
@@ -1493,7 +1493,7 @@
 		do_start(cs);
 		break;
 
-	/* events from the interface */ // FIXME without ACT_xxxx?
+	/* events from the interface */
 	case ACT_IF_LOCK:
 		cs->cmd_result = ev->parameter ? do_lock(cs) : do_unlock(cs);
 		cs->waiting = 0;
@@ -1512,7 +1512,7 @@
 		wake_up(&cs->waitqueue);
 		break;
 
-	/* events from the proc file system */ // FIXME without ACT_xxxx?
+	/* events from the proc file system */
 	case ACT_PROC_CIDMODE:
 		spin_lock_irqsave(&cs->lock, flags);
 		if (ev->parameter != cs->cidmode) {
@@ -1649,7 +1649,8 @@
 	for (curact = 0; curact < MAXACT; ++curact) {
 		/* The row tells us what we should do  ..
 		 */
-		do_action(rep->action[curact], cs, bcs, &at_state, &p_command, &genresp, &resp_code, ev);
+		do_action(rep->action[curact], cs, bcs, &at_state, &p_command,
+			  &genresp, &resp_code, ev);
 		if (!at_state)
 			break; /* may be freed after disconnect */
 	}
@@ -1661,13 +1662,14 @@
 
 		if (genresp) {
 			spin_lock_irqsave(&cs->lock, flags);
-			at_state->timer_expires = 0; //FIXME
-			at_state->timer_active = 0; //FIXME
+			at_state->timer_expires = 0;
+			at_state->timer_active = 0;
 			spin_unlock_irqrestore(&cs->lock, flags);
-			gigaset_add_event(cs, at_state, resp_code, NULL, 0, NULL);
+			gigaset_add_event(cs, at_state, resp_code,
+					  NULL, 0, NULL);
 		} else {
 			/* Send command to modem if not NULL... */
-			if (p_command/*rep->command*/) {
+			if (p_command) {
 				if (cs->connected)
 					send_command(cs, p_command,
 						     sendcid, cs->dle,
@@ -1754,7 +1756,8 @@
 		}
 	}
 
-	/* only switch back to unimodem mode, if no commands are pending and no channels are up */
+	/* only switch back to unimodem mode if no commands are pending and
+	 * no channels are up */
 	spin_lock_irqsave(&cs->lock, flags);
 	if (cs->at_state.pending_commands == PC_UMMODE
 	    && !cs->cidmode
@@ -1813,9 +1816,8 @@
 
 	if (cs->at_state.pending_commands & PC_INIT) {
 		cs->at_state.pending_commands &= ~PC_INIT;
-		cs->dle = 0; //FIXME
+		cs->dle = 0;
 		cs->inbuf->inputstate = INS_command;
-		//FIXME reset card state (or -> LOCK0)?
 		schedule_sequence(cs, &cs->at_state, SEQ_INIT);
 		return;
 	}
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index a2f6125..e963a6c 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -23,7 +23,6 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
-#include <linux/isdnif.h>
 #include <linux/usb.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
@@ -35,12 +34,11 @@
 #include <linux/list.h>
 #include <asm/atomic.h>
 
-#define GIG_VERSION {0,5,0,0}
-#define GIG_COMPAT  {0,4,0,0}
+#define GIG_VERSION {0, 5, 0, 0}
+#define GIG_COMPAT  {0, 4, 0, 0}
 
 #define MAX_REC_PARAMS 10	/* Max. number of params in response string */
 #define MAX_RESP_SIZE 512	/* Max. size of a response string */
-#define HW_HDR_LEN 2		/* Header size used to store ack info */
 
 #define MAX_EVENTS 64		/* size of event queue */
 
@@ -135,35 +133,32 @@
 #define OUT_VENDOR_REQ	(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
 #define IN_VENDOR_REQ	(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
 
-/* int-in-events 3070 */
+/* interrupt pipe messages */
 #define HD_B1_FLOW_CONTROL		0x80
 #define HD_B2_FLOW_CONTROL		0x81
-#define HD_RECEIVEATDATA_ACK		(0x35)		// 3070
-						// att: HD_RECEIVE>>AT<<DATA_ACK
-#define HD_READY_SEND_ATDATA		(0x36)		// 3070
-#define HD_OPEN_ATCHANNEL_ACK		(0x37)		// 3070
-#define HD_CLOSE_ATCHANNEL_ACK		(0x38)		// 3070
-#define HD_DEVICE_INIT_OK		(0x11)		// ISurf USB + 3070
-#define HD_OPEN_B1CHANNEL_ACK		(0x51)		// ISurf USB + 3070
-#define HD_OPEN_B2CHANNEL_ACK		(0x52)		// ISurf USB + 3070
-#define HD_CLOSE_B1CHANNEL_ACK		(0x53)		// ISurf USB + 3070
-#define HD_CLOSE_B2CHANNEL_ACK		(0x54)		// ISurf USB + 3070
-// 	 Powermangment
-#define HD_SUSPEND_END			(0x61)		// ISurf USB
-//   Configuration
-#define HD_RESET_INTERRUPT_PIPE_ACK	(0xFF)		// ISurf USB + 3070
+#define HD_RECEIVEATDATA_ACK		(0x35)		/* 3070 */
+#define HD_READY_SEND_ATDATA		(0x36)		/* 3070 */
+#define HD_OPEN_ATCHANNEL_ACK		(0x37)		/* 3070 */
+#define HD_CLOSE_ATCHANNEL_ACK		(0x38)		/* 3070 */
+#define HD_DEVICE_INIT_OK		(0x11)		/* ISurf USB + 3070 */
+#define HD_OPEN_B1CHANNEL_ACK		(0x51)		/* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL_ACK		(0x52)		/* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL_ACK		(0x53)		/* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL_ACK		(0x54)		/* ISurf USB + 3070 */
+#define HD_SUSPEND_END			(0x61)		/* ISurf USB */
+#define HD_RESET_INTERRUPT_PIPE_ACK	(0xFF)		/* ISurf USB + 3070 */
 
-/* control requests 3070 */
-#define	HD_OPEN_B1CHANNEL		(0x23)		// ISurf USB + 3070
-#define	HD_CLOSE_B1CHANNEL		(0x24)		// ISurf USB + 3070
-#define	HD_OPEN_B2CHANNEL		(0x25)		// ISurf USB + 3070
-#define	HD_CLOSE_B2CHANNEL		(0x26)		// ISurf USB + 3070
-#define HD_RESET_INTERRUPT_PIPE		(0x27)		// ISurf USB + 3070
-#define	HD_DEVICE_INIT_ACK		(0x34)		// ISurf USB + 3070
-#define	HD_WRITE_ATMESSAGE		(0x12)		// 3070
-#define	HD_READ_ATMESSAGE		(0x13)		// 3070
-#define	HD_OPEN_ATCHANNEL		(0x28)		// 3070
-#define	HD_CLOSE_ATCHANNEL		(0x29)		// 3070
+/* control requests */
+#define	HD_OPEN_B1CHANNEL		(0x23)		/* ISurf USB + 3070 */
+#define	HD_CLOSE_B1CHANNEL		(0x24)		/* ISurf USB + 3070 */
+#define	HD_OPEN_B2CHANNEL		(0x25)		/* ISurf USB + 3070 */
+#define	HD_CLOSE_B2CHANNEL		(0x26)		/* ISurf USB + 3070 */
+#define HD_RESET_INTERRUPT_PIPE		(0x27)		/* ISurf USB + 3070 */
+#define	HD_DEVICE_INIT_ACK		(0x34)		/* ISurf USB + 3070 */
+#define	HD_WRITE_ATMESSAGE		(0x12)		/* 3070 */
+#define	HD_READ_ATMESSAGE		(0x13)		/* 3070 */
+#define	HD_OPEN_ATCHANNEL		(0x28)		/* 3070 */
+#define	HD_CLOSE_ATCHANNEL		(0x29)		/* 3070 */
 
 /* number of B channels supported by base driver */
 #define BAS_CHANNELS	2
@@ -193,7 +188,9 @@
 #define AT_PROTO	4
 #define AT_TYPE		5
 #define AT_HLC		6
-#define AT_NUM		7
+#define AT_CLIP		7
+/* total number */
+#define AT_NUM		8
 
 /* variables in struct at_state_t */
 #define VAR_ZSAU	0
@@ -216,7 +213,6 @@
 #define EV_START	-110
 #define EV_STOP		-111
 #define EV_IF_LOCK	-112
-#define EV_PROTO_L2	-113
 #define EV_ACCEPT	-114
 #define EV_DIAL		-115
 #define EV_HUP		-116
@@ -224,12 +220,11 @@
 #define EV_BC_CLOSED	-118
 
 /* input state */
-#define INS_command	0x0001
-#define INS_DLE_char	0x0002
+#define INS_command	0x0001	/* receiving messages (not payload data) */
+#define INS_DLE_char	0x0002	/* DLE flag received (in DLE mode) */
 #define INS_byte_stuff	0x0004
 #define INS_have_data	0x0008
-#define INS_skip_frame	0x0010
-#define INS_DLE_command	0x0020
+#define INS_DLE_command	0x0020	/* DLE message start (<DLE> X) received */
 #define INS_flag_hunt	0x0040
 
 /* channel state */
@@ -259,6 +254,11 @@
 #define SM_LOCKED	0
 #define SM_ISDN		1 /* default */
 
+/* layer 2 protocols (AT^SBPR=...) */
+#define L2_BITSYNC	0
+#define L2_HDLC		1
+#define L2_VOICE	2
+
 struct gigaset_ops;
 struct gigaset_driver;
 
@@ -286,8 +286,6 @@
 extern struct reply_t gigaset_tab_nocid[];
 
 struct inbuf_t {
-	unsigned char		*rcvbuf;	/* usb-gigaset receive buffer */
-	struct bc_state		*bcs;
 	struct cardstate	*cs;
 	int			inputstate;
 	int			head, tail;
@@ -359,12 +357,6 @@
 	struct bc_state		*bcs;
 };
 
-struct resp_type_t {
-	unsigned char	*response;
-	int		resp_code;	/* RSP_XXXX */
-	int		type;		/* RT_XXXX */
-};
-
 struct event_t {
 	int type;
 	void *ptr, *arg;
@@ -395,7 +387,7 @@
 
 	unsigned chstate;		/* bitmap (CHS_*) */
 	int ignore;
-	unsigned proto2;		/* Layer 2 protocol (ISDN_PROTO_L2_*) */
+	unsigned proto2;		/* layer 2 protocol (L2_*) */
 	char *commands[AT_NUM];		/* see AT_XXXX */
 
 #ifdef CONFIG_GIGASET_DEBUG
@@ -410,6 +402,8 @@
 		struct usb_bc_state *usb;	/* usb hardware driver (m105) */
 		struct bas_bc_state *bas;	/* usb hardware driver (base) */
 	} hw;
+
+	void *ap;			/* LL application structure */
 };
 
 struct cardstate {
@@ -456,12 +450,13 @@
 
 	unsigned running;		/* !=0 if events are handled */
 	unsigned connected;		/* !=0 if hardware is connected */
-	unsigned isdn_up;		/* !=0 after ISDN_STAT_RUN */
+	unsigned isdn_up;		/* !=0 after gigaset_isdn_start() */
 
 	unsigned cidmode;
 
 	int myid;			/* id for communication with LL */
-	isdn_if iif;
+	void *iif;			/* LL interface structure */
+	unsigned short hw_hdr_len;	/* headroom needed in data skbs */
 
 	struct reply_t *tabnocid;
 	struct reply_t *tabcid;
@@ -476,8 +471,8 @@
 
 	struct timer_list timer;
 	int retry_count;
-	int dle;			/* !=0 if modem commands/responses are
-					   dle encoded */
+	int dle;			/* !=0 if DLE mode is active
+					   (ZDLE=1 received -- M10x only) */
 	int cur_at_seq;			/* sequence of AT commands being
 					   processed */
 	int curchannel;			/* channel those commands are meant
@@ -616,7 +611,9 @@
 	int (*baud_rate)(struct cardstate *cs, unsigned cflag);
 	int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
 
-	/* Called from i4l.c to put an skb into the send-queue. */
+	/* Called from LL interface to put an skb into the send-queue.
+	 * After sending is completed, gigaset_skb_sent() must be called
+	 * with the skb's link layer header preserved. */
 	int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
 
 	/* Called from ev-layer.c to process a block of data
@@ -625,7 +622,8 @@
 
 };
 
-/* = Common structures and definitions ======================================= */
+/* = Common structures and definitions =======================================
+ */
 
 /* Parser states for DLE-Event:
  * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
@@ -638,8 +636,7 @@
  *  Functions implemented in asyncdata.c
  */
 
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
 
 /* Called from ev-layer.c to process a block of data
@@ -650,8 +647,7 @@
  *  Functions implemented in isocdata.c
  */
 
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
 int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
 
 /* Called from ev-layer.c to process a block of data
@@ -674,36 +670,26 @@
 int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
 
 /* ===========================================================================
- *  Functions implemented in i4l.c/gigaset.h
+ *  Functions implemented in LL interface
  */
 
-/* Called by gigaset_initcs() for setting up with the isdn4linux subsystem */
-int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid);
+/* Called from common.c for setting up/shutting down with the ISDN subsystem */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregister(struct cardstate *cs);
 
-/* Called from xxx-gigaset.c to indicate completion of sending an skb */
+/* Called from hardware module to indicate completion of an skb */
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_isdn_rcv_err(struct bc_state *bcs);
 
 /* Called from common.c/ev-layer.c to indicate events relevant to the LL */
+void gigaset_isdn_start(struct cardstate *cs);
+void gigaset_isdn_stop(struct cardstate *cs);
 int gigaset_isdn_icall(struct at_state_t *at_state);
-int gigaset_isdn_setup_accept(struct at_state_t *at_state);
-int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data);
-
-void gigaset_i4l_cmd(struct cardstate *cs, int cmd);
-void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd);
-
-
-static inline void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
-	isdn_ctrl response;
-
-	/* error -> LL */
-	gig_dbg(DEBUG_CMD, "sending L1ERR");
-	response.driver = bcs->cs->myid;
-	response.command = ISDN_STAT_L1ERR;
-	response.arg = bcs->channel;
-	response.parm.errcode = ISDN_STAT_L1ERR_RECV;
-	bcs->cs->iif.statcallb(&response);
-}
+void gigaset_isdn_connD(struct bc_state *bcs);
+void gigaset_isdn_hupD(struct bc_state *bcs);
+void gigaset_isdn_connB(struct bc_state *bcs);
+void gigaset_isdn_hupB(struct bc_state *bcs);
 
 /* ===========================================================================
  *  Functions implemented in ev-layer.c
@@ -732,6 +718,7 @@
 void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
 		     struct cardstate *cs, int cid);
 int gigaset_get_channel(struct bc_state *bcs);
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
 void gigaset_free_channel(struct bc_state *bcs);
 int gigaset_get_channels(struct cardstate *cs);
 void gigaset_free_channels(struct cardstate *cs);
@@ -781,7 +768,7 @@
 				  void *ptr, int parameter, void *arg);
 
 /* Called on CONFIG1 command from frontend. */
-int gigaset_enterconfigmode(struct cardstate *cs); //0: success <0: errorcode
+int gigaset_enterconfigmode(struct cardstate *cs);
 
 /* cs->lock must not be locked */
 static inline void gigaset_schedule_event(struct cardstate *cs)
@@ -816,35 +803,6 @@
 /* handling routines for sk_buff */
 /* ============================= */
 
-/* pass received skb to LL
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_skb(struct sk_buff *skb,
-				   struct cardstate *cs,
-				   struct bc_state *bcs)
-{
-	cs->iif.rcvcallb_skb(cs->myid, bcs->channel, skb);
-	bcs->trans_down++;
-}
-
-/* handle reception of corrupted skb
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_error(struct sk_buff *procskb,
-				     struct cardstate *cs,
-				     struct bc_state *bcs)
-{
-	if (procskb)
-		dev_kfree_skb(procskb);
-
-	if (bcs->ignore)
-		--bcs->ignore;
-	else {
-		++bcs->corrupted;
-		gigaset_isdn_rcv_err(bcs);
-	}
-}
-
 /* append received bytes to inbuf */
 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
 		       unsigned numbytes);
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 654489d..c129ee4 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -14,6 +14,9 @@
  */
 
 #include "gigaset.h"
+#include <linux/isdnif.h>
+
+#define HW_HDR_LEN	2	/* Header size used to store ack info */
 
 /* == Handling of I4L IO =====================================================*/
 
@@ -36,12 +39,12 @@
 static int writebuf_from_LL(int driverID, int channel, int ack,
 			    struct sk_buff *skb)
 {
-	struct cardstate *cs;
+	struct cardstate *cs = gigaset_get_cs_by_id(driverID);
 	struct bc_state *bcs;
+	unsigned char *ack_header;
 	unsigned len;
-	unsigned skblen;
 
-	if (!(cs = gigaset_get_cs_by_id(driverID))) {
+	if (!cs) {
 		pr_err("%s: invalid driver ID (%d)\n", __func__, driverID);
 		return -ENODEV;
 	}
@@ -75,11 +78,23 @@
 		return -EINVAL;
 	}
 
-	skblen = ack ? len : 0;
-	skb->head[0] = skblen & 0xff;
-	skb->head[1] = skblen >> 8;
-	gig_dbg(DEBUG_MCMD, "skb: len=%u, skblen=%u: %02x %02x",
-		len, skblen, (unsigned) skb->head[0], (unsigned) skb->head[1]);
+	/* set up acknowledgement header */
+	if (skb_headroom(skb) < HW_HDR_LEN) {
+		/* should never happen */
+		dev_err(cs->dev, "%s: insufficient skb headroom\n", __func__);
+		return -ENOMEM;
+	}
+	skb_set_mac_header(skb, -HW_HDR_LEN);
+	skb->mac_len = HW_HDR_LEN;
+	ack_header = skb_mac_header(skb);
+	if (ack) {
+		ack_header[0] = len & 0xff;
+		ack_header[1] = len >> 8;
+	} else {
+		ack_header[0] = ack_header[1] = 0;
+	}
+	gig_dbg(DEBUG_MCMD, "skb: len=%u, ack=%d: %02x %02x",
+		len, ack, ack_header[0], ack_header[1]);
 
 	/* pass to device-specific module */
 	return cs->ops->send_skb(bcs, skb);
@@ -95,6 +110,8 @@
  */
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
 {
+	isdn_if *iif = bcs->cs->iif;
+	unsigned char *ack_header = skb_mac_header(skb);
 	unsigned len;
 	isdn_ctrl response;
 
@@ -104,8 +121,7 @@
 		dev_warn(bcs->cs->dev, "%s: skb->len==%d\n",
 			 __func__, skb->len);
 
-	len = (unsigned char) skb->head[0] |
-	      (unsigned) (unsigned char) skb->head[1] << 8;
+	len = ack_header[0] + ((unsigned) ack_header[1] << 8);
 	if (len) {
 		gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)",
 			bcs->cs->myid, bcs->channel, len);
@@ -114,71 +130,177 @@
 		response.command = ISDN_STAT_BSENT;
 		response.arg = bcs->channel;
 		response.parm.length = len;
-		bcs->cs->iif.statcallb(&response);
+		iif->statcallb(&response);
 	}
 }
 EXPORT_SYMBOL_GPL(gigaset_skb_sent);
 
+/**
+ * gigaset_skb_rcvd() - pass received skb to LL
+ * @bcs:	B channel descriptor structure.
+ * @skb:	received data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when user data has
+ * been successfully received, for passing to the LL.
+ * Warning: skb must not be accessed anymore!
+ */
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
+{
+	isdn_if *iif = bcs->cs->iif;
+
+	iif->rcvcallb_skb(bcs->cs->myid, bcs->channel, skb);
+	bcs->trans_down++;
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
+
+/**
+ * gigaset_isdn_rcv_err() - signal receive error
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when a receive error
+ * has occurred, for signalling to the LL.
+ */
+void gigaset_isdn_rcv_err(struct bc_state *bcs)
+{
+	isdn_if *iif = bcs->cs->iif;
+	isdn_ctrl response;
+
+	/* if currently ignoring packets, just count down */
+	if (bcs->ignore) {
+		bcs->ignore--;
+		return;
+	}
+
+	/* update statistics */
+	bcs->corrupted++;
+
+	/* error -> LL */
+	gig_dbg(DEBUG_CMD, "sending L1ERR");
+	response.driver = bcs->cs->myid;
+	response.command = ISDN_STAT_L1ERR;
+	response.arg = bcs->channel;
+	response.parm.errcode = ISDN_STAT_L1ERR_RECV;
+	iif->statcallb(&response);
+}
+EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
+
 /* This function will be called by LL to send commands
  * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL,
  * so don't put too much effort into it.
  */
 static int command_from_LL(isdn_ctrl *cntrl)
 {
-	struct cardstate *cs = gigaset_get_cs_by_id(cntrl->driver);
+	struct cardstate *cs;
 	struct bc_state *bcs;
 	int retval = 0;
-	struct setup_parm *sp;
+	char **commands;
+	int ch;
+	int i;
+	size_t l;
 
 	gigaset_debugdrivers();
 
-	if (!cs) {
+	gig_dbg(DEBUG_CMD, "driver: %d, command: %d, arg: 0x%lx",
+		cntrl->driver, cntrl->command, cntrl->arg);
+
+	cs = gigaset_get_cs_by_id(cntrl->driver);
+	if (cs == NULL) {
 		pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver);
 		return -ENODEV;
 	}
+	ch = cntrl->arg & 0xff;
 
 	switch (cntrl->command) {
 	case ISDN_CMD_IOCTL:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_IOCTL (driver: %d, arg: %ld)",
-			cntrl->driver, cntrl->arg);
-
 		dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n");
 		return -EINVAL;
 
 	case ISDN_CMD_DIAL:
 		gig_dbg(DEBUG_ANY,
-			"ISDN_CMD_DIAL (driver: %d, ch: %ld, "
-			"phone: %s, ownmsn: %s, si1: %d, si2: %d)",
-			cntrl->driver, cntrl->arg,
+			"ISDN_CMD_DIAL (phone: %s, msn: %s, si1: %d, si2: %d)",
 			cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn,
 			cntrl->parm.setup.si1, cntrl->parm.setup.si2);
 
-		if (cntrl->arg >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_DIAL: invalid channel (%d)\n",
-				(int) cntrl->arg);
+				"ISDN_CMD_DIAL: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		bcs = cs->bcs + cntrl->arg;
-
+		bcs = cs->bcs + ch;
 		if (!gigaset_get_channel(bcs)) {
 			dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
 			return -EBUSY;
 		}
 
-		sp = kmalloc(sizeof *sp, GFP_ATOMIC);
-		if (!sp) {
+		commands = kzalloc(AT_NUM*(sizeof *commands), GFP_ATOMIC);
+		if (!commands) {
 			gigaset_free_channel(bcs);
 			dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n");
 			return -ENOMEM;
 		}
-		*sp = cntrl->parm.setup;
 
-		if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, sp,
+		l = 3 + strlen(cntrl->parm.setup.phone);
+		commands[AT_DIAL] = kmalloc(l, GFP_ATOMIC);
+		if (!commands[AT_DIAL])
+			goto oom;
+		if (cntrl->parm.setup.phone[0] == '*' &&
+		    cntrl->parm.setup.phone[1] == '*') {
+			/* internal call: translate ** prefix to CTP value */
+			commands[AT_TYPE] = kstrdup("^SCTP=0\r", GFP_ATOMIC);
+			if (!commands[AT_TYPE])
+				goto oom;
+			snprintf(commands[AT_DIAL], l,
+				 "D%s\r", cntrl->parm.setup.phone+2);
+		} else {
+			commands[AT_TYPE] = kstrdup("^SCTP=1\r", GFP_ATOMIC);
+			if (!commands[AT_TYPE])
+				goto oom;
+			snprintf(commands[AT_DIAL], l,
+				 "D%s\r", cntrl->parm.setup.phone);
+		}
+
+		l = strlen(cntrl->parm.setup.eazmsn);
+		if (l) {
+			l += 8;
+			commands[AT_MSN] = kmalloc(l, GFP_ATOMIC);
+			if (!commands[AT_MSN])
+				goto oom;
+			snprintf(commands[AT_MSN], l, "^SMSN=%s\r",
+				 cntrl->parm.setup.eazmsn);
+		}
+
+		switch (cntrl->parm.setup.si1) {
+		case 1:		/* audio */
+			/* BC = 9090A3: 3.1 kHz audio, A-law */
+			commands[AT_BC] = kstrdup("^SBC=9090A3\r", GFP_ATOMIC);
+			if (!commands[AT_BC])
+				goto oom;
+			break;
+		case 7:		/* data */
+		default:	/* hope the app knows what it is doing */
+			/* BC = 8890: unrestricted digital information */
+			commands[AT_BC] = kstrdup("^SBC=8890\r", GFP_ATOMIC);
+			if (!commands[AT_BC])
+				goto oom;
+		}
+		/* ToDo: other si1 values, inspect si2, set HLC/LLC */
+
+		commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC);
+		if (!commands[AT_PROTO])
+			goto oom;
+		snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
+
+		commands[AT_ISO] = kmalloc(9, GFP_ATOMIC);
+		if (!commands[AT_ISO])
+			goto oom;
+		snprintf(commands[AT_ISO], 9, "^SISO=%u\r",
+			 (unsigned) bcs->channel + 1);
+
+		if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands,
 				       bcs->at_state.seq_index, NULL)) {
-			//FIXME what should we do?
-			kfree(sp);
+			for (i = 0; i < AT_NUM; ++i)
+				kfree(commands[i]);
+			kfree(commands);
 			gigaset_free_channel(bcs);
 			return -ENOMEM;
 		}
@@ -186,115 +308,102 @@
 		gig_dbg(DEBUG_CMD, "scheduling DIAL");
 		gigaset_schedule_event(cs);
 		break;
-	case ISDN_CMD_ACCEPTD: //FIXME
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTD");
-
-		if (cntrl->arg >= cs->channels) {
+	case ISDN_CMD_ACCEPTD:
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_ACCEPTD: invalid channel (%d)\n",
-				(int) cntrl->arg);
+				"ISDN_CMD_ACCEPTD: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg].at_state,
-				       EV_ACCEPT, NULL, 0, NULL)) {
-			//FIXME what should we do?
+		bcs = cs->bcs + ch;
+		if (!gigaset_add_event(cs, &bcs->at_state,
+				       EV_ACCEPT, NULL, 0, NULL))
 			return -ENOMEM;
-		}
 
 		gig_dbg(DEBUG_CMD, "scheduling ACCEPT");
 		gigaset_schedule_event(cs);
 
 		break;
 	case ISDN_CMD_ACCEPTB:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTB");
 		break;
 	case ISDN_CMD_HANGUP:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_HANGUP (ch: %d)",
-			(int) cntrl->arg);
-
-		if (cntrl->arg >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_HANGUP: invalid channel (%d)\n",
-				(int) cntrl->arg);
+				"ISDN_CMD_HANGUP: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg].at_state,
-				       EV_HUP, NULL, 0, NULL)) {
-			//FIXME what should we do?
+		bcs = cs->bcs + ch;
+		if (!gigaset_add_event(cs, &bcs->at_state,
+				       EV_HUP, NULL, 0, NULL))
 			return -ENOMEM;
-		}
 
 		gig_dbg(DEBUG_CMD, "scheduling HUP");
 		gigaset_schedule_event(cs);
 
 		break;
-	case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ //FIXME
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_CLREAZ");
+	case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */
+		dev_info(cs->dev, "ignoring ISDN_CMD_CLREAZ\n");
 		break;
-	case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ //FIXME
-		gig_dbg(DEBUG_ANY,
-			"ISDN_CMD_SETEAZ (id: %d, ch: %ld, number: %s)",
-			cntrl->driver, cntrl->arg, cntrl->parm.num);
+	case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */
+		dev_info(cs->dev, "ignoring ISDN_CMD_SETEAZ (%s)\n",
+			 cntrl->parm.num);
 		break;
 	case ISDN_CMD_SETL2: /* Set L2 to given protocol */
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_SETL2 (ch: %ld, proto: %lx)",
-			cntrl->arg & 0xff, (cntrl->arg >> 8));
-
-		if ((cntrl->arg & 0xff) >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_SETL2: invalid channel (%d)\n",
-				(int) cntrl->arg & 0xff);
+				"ISDN_CMD_SETL2: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg & 0xff].at_state,
-				       EV_PROTO_L2, NULL, cntrl->arg >> 8,
-				       NULL)) {
-			//FIXME what should we do?
-			return -ENOMEM;
+		bcs = cs->bcs + ch;
+		if (bcs->chstate & CHS_D_UP) {
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL2: channel active (%d)\n", ch);
+			return -EINVAL;
 		}
-
-		gig_dbg(DEBUG_CMD, "scheduling PROTO_L2");
-		gigaset_schedule_event(cs);
+		switch (cntrl->arg >> 8) {
+		case ISDN_PROTO_L2_HDLC:
+			gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_HDLC");
+			bcs->proto2 = L2_HDLC;
+			break;
+		case ISDN_PROTO_L2_TRANS:
+			gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_VOICE");
+			bcs->proto2 = L2_VOICE;
+			break;
+		default:
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL2: unsupported protocol (%lu)\n",
+				cntrl->arg >> 8);
+			return -EINVAL;
+		}
 		break;
 	case ISDN_CMD_SETL3: /* Set L3 to given protocol */
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_SETL3 (ch: %ld, proto: %lx)",
-			cntrl->arg & 0xff, (cntrl->arg >> 8));
-
-		if ((cntrl->arg & 0xff) >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_SETL3: invalid channel (%d)\n",
-				(int) cntrl->arg & 0xff);
+				"ISDN_CMD_SETL3: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
 
 		if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) {
 			dev_err(cs->dev,
-				"ISDN_CMD_SETL3: invalid protocol %lu\n",
+				"ISDN_CMD_SETL3: unsupported protocol (%lu)\n",
 				cntrl->arg >> 8);
 			return -EINVAL;
 		}
 
 		break;
 	case ISDN_CMD_PROCEED:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_PROCEED"); //FIXME
+		gig_dbg(DEBUG_ANY, "ISDN_CMD_PROCEED");
 		break;
 	case ISDN_CMD_ALERT:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_ALERT"); //FIXME
+		gig_dbg(DEBUG_ANY, "ISDN_CMD_ALERT");
 		if (cntrl->arg >= cs->channels) {
 			dev_err(cs->dev,
 				"ISDN_CMD_ALERT: invalid channel (%d)\n",
 				(int) cntrl->arg);
 			return -EINVAL;
 		}
-		//bcs = cs->bcs + cntrl->arg;
-		//bcs->proto2 = -1;
-		// FIXME
 		break;
 	case ISDN_CMD_REDIR:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_REDIR"); //FIXME
+		gig_dbg(DEBUG_ANY, "ISDN_CMD_REDIR");
 		break;
 	case ISDN_CMD_PROT_IO:
 		gig_dbg(DEBUG_ANY, "ISDN_CMD_PROT_IO");
@@ -324,149 +433,34 @@
 	}
 
 	return retval;
+
+oom:
+	dev_err(bcs->cs->dev, "out of memory\n");
+	for (i = 0; i < AT_NUM; ++i)
+		kfree(commands[i]);
+	return -ENOMEM;
 }
 
-void gigaset_i4l_cmd(struct cardstate *cs, int cmd)
+static void gigaset_i4l_cmd(struct cardstate *cs, int cmd)
 {
+	isdn_if *iif = cs->iif;
 	isdn_ctrl command;
 
 	command.driver = cs->myid;
 	command.command = cmd;
 	command.arg = 0;
-	cs->iif.statcallb(&command);
+	iif->statcallb(&command);
 }
 
-void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd)
+static void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd)
 {
+	isdn_if *iif = bcs->cs->iif;
 	isdn_ctrl command;
 
 	command.driver = bcs->cs->myid;
 	command.command = cmd;
 	command.arg = bcs->channel;
-	bcs->cs->iif.statcallb(&command);
-}
-
-int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data)
-{
-	struct bc_state *bcs = at_state->bcs;
-	unsigned proto;
-	const char *bc;
-	size_t length[AT_NUM];
-	size_t l;
-	int i;
-	struct setup_parm *sp = data;
-
-	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
-		proto = 1; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	case ISDN_PROTO_L2_TRANS:
-		proto = 2; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	default:
-		dev_err(bcs->cs->dev, "%s: invalid L2 protocol: %u\n",
-			__func__, bcs->proto2);
-		return -EINVAL;
-	}
-
-	switch (sp->si1) {
-	case 1:		/* audio */
-		bc = "9090A3";	/* 3.1 kHz audio, A-law */
-		break;
-	case 7:		/* data */
-	default:	/* hope the app knows what it is doing */
-		bc = "8890";	/* unrestricted digital information */
-	}
-	//FIXME add missing si1 values from 1TR6, inspect si2, set HLC/LLC
-
-	length[AT_DIAL ] = 1 + strlen(sp->phone) + 1 + 1;
-	l = strlen(sp->eazmsn);
-	length[AT_MSN  ] = l ? 6 + l + 1 + 1 : 0;
-	length[AT_BC   ] = 5 + strlen(bc) + 1 + 1;
-	length[AT_PROTO] = 6 + 1 + 1 + 1; /* proto: 1 character */
-	length[AT_ISO  ] = 6 + 1 + 1 + 1; /* channel: 1 character */
-	length[AT_TYPE ] = 6 + 1 + 1 + 1; /* call type: 1 character */
-	length[AT_HLC  ] = 0;
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = NULL;
-		if (length[i] &&
-		    !(bcs->commands[i] = kmalloc(length[i], GFP_ATOMIC))) {
-			dev_err(bcs->cs->dev, "out of memory\n");
-			return -ENOMEM;
-		}
-	}
-
-	/* type = 1: extern, 0: intern, 2: recall, 3: door, 4: centrex */
-	if (sp->phone[0] == '*' && sp->phone[1] == '*') {
-		/* internal call: translate ** prefix to CTP value */
-		snprintf(bcs->commands[AT_DIAL], length[AT_DIAL],
-			 "D%s\r", sp->phone+2);
-		strncpy(bcs->commands[AT_TYPE], "^SCTP=0\r", length[AT_TYPE]);
-	} else {
-		snprintf(bcs->commands[AT_DIAL], length[AT_DIAL],
-			 "D%s\r", sp->phone);
-		strncpy(bcs->commands[AT_TYPE], "^SCTP=1\r", length[AT_TYPE]);
-	}
-
-	if (bcs->commands[AT_MSN])
-		snprintf(bcs->commands[AT_MSN], length[AT_MSN],
-			 "^SMSN=%s\r", sp->eazmsn);
-	snprintf(bcs->commands[AT_BC   ], length[AT_BC   ],
-		 "^SBC=%s\r", bc);
-	snprintf(bcs->commands[AT_PROTO], length[AT_PROTO],
-		 "^SBPR=%u\r", proto);
-	snprintf(bcs->commands[AT_ISO  ], length[AT_ISO  ],
-		 "^SISO=%u\r", (unsigned)bcs->channel + 1);
-
-	return 0;
-}
-
-int gigaset_isdn_setup_accept(struct at_state_t *at_state)
-{
-	unsigned proto;
-	size_t length[AT_NUM];
-	int i;
-	struct bc_state *bcs = at_state->bcs;
-
-	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
-		proto = 1; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	case ISDN_PROTO_L2_TRANS:
-		proto = 2; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	default:
-		dev_err(at_state->cs->dev, "%s: invalid protocol: %u\n",
-			__func__, bcs->proto2);
-		return -EINVAL;
-	}
-
-	length[AT_DIAL ] = 0;
-	length[AT_MSN  ] = 0;
-	length[AT_BC   ] = 0;
-	length[AT_PROTO] = 6 + 1 + 1 + 1; /* proto: 1 character */
-	length[AT_ISO  ] = 6 + 1 + 1 + 1; /* channel: 1 character */
-	length[AT_TYPE ] = 0;
-	length[AT_HLC  ] = 0;
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = NULL;
-		if (length[i] &&
-		    !(bcs->commands[i] = kmalloc(length[i], GFP_ATOMIC))) {
-			dev_err(at_state->cs->dev, "out of memory\n");
-			return -ENOMEM;
-		}
-	}
-
-	snprintf(bcs->commands[AT_PROTO], length[AT_PROTO],
-		 "^SBPR=%u\r", proto);
-	snprintf(bcs->commands[AT_ISO  ], length[AT_ISO  ],
-		 "^SISO=%u\r", (unsigned) bcs->channel + 1);
-
-	return 0;
+	iif->statcallb(&command);
 }
 
 /**
@@ -482,13 +476,14 @@
 {
 	struct cardstate *cs = at_state->cs;
 	struct bc_state *bcs = at_state->bcs;
+	isdn_if *iif = cs->iif;
 	isdn_ctrl response;
 	int retval;
 
 	/* fill ICALL structure */
 	response.parm.setup.si1 = 0;	/* default: unknown */
 	response.parm.setup.si2 = 0;
-	response.parm.setup.screen = 0;	//FIXME how to set these?
+	response.parm.setup.screen = 0;
 	response.parm.setup.plan = 0;
 	if (!at_state->str_var[STR_ZBC]) {
 		/* no BC (internal call): assume speech, A-law */
@@ -509,29 +504,27 @@
 		return ICALL_IGNORE;
 	}
 	if (at_state->str_var[STR_NMBR]) {
-		strncpy(response.parm.setup.phone, at_state->str_var[STR_NMBR],
-			sizeof response.parm.setup.phone - 1);
-		response.parm.setup.phone[sizeof response.parm.setup.phone - 1] = 0;
+		strlcpy(response.parm.setup.phone, at_state->str_var[STR_NMBR],
+			sizeof response.parm.setup.phone);
 	} else
 		response.parm.setup.phone[0] = 0;
 	if (at_state->str_var[STR_ZCPN]) {
-		strncpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN],
-			sizeof response.parm.setup.eazmsn - 1);
-		response.parm.setup.eazmsn[sizeof response.parm.setup.eazmsn - 1] = 0;
+		strlcpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN],
+			sizeof response.parm.setup.eazmsn);
 	} else
 		response.parm.setup.eazmsn[0] = 0;
 
 	if (!bcs) {
 		dev_notice(cs->dev, "no channel for incoming call\n");
 		response.command = ISDN_STAT_ICALLW;
-		response.arg = 0; //FIXME
+		response.arg = 0;
 	} else {
 		gig_dbg(DEBUG_CMD, "Sending ICALL");
 		response.command = ISDN_STAT_ICALL;
-		response.arg = bcs->channel; //FIXME
+		response.arg = bcs->channel;
 	}
 	response.driver = cs->myid;
-	retval = cs->iif.statcallb(&response);
+	retval = iif->statcallb(&response);
 	gig_dbg(DEBUG_CMD, "Response: %d", retval);
 	switch (retval) {
 	case 0:	/* no takers */
@@ -560,16 +553,109 @@
 	}
 }
 
-/* Set Callback function pointer */
-int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)
+/**
+ * gigaset_isdn_connD() - signal D channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the D channel connection has
+ * been established.
+ */
+void gigaset_isdn_connD(struct bc_state *bcs)
 {
-	isdn_if *iif = &cs->iif;
+	gig_dbg(DEBUG_CMD, "sending DCONN");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
+}
 
-	gig_dbg(DEBUG_ANY, "Register driver capabilities to LL");
+/**
+ * gigaset_isdn_hupD() - signal D channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the D channel connection has
+ * been shut down.
+ */
+void gigaset_isdn_hupD(struct bc_state *bcs)
+{
+	gig_dbg(DEBUG_CMD, "sending DHUP");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+}
+
+/**
+ * gigaset_isdn_connB() - signal B channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the B channel connection has
+ * been established.
+ */
+void gigaset_isdn_connB(struct bc_state *bcs)
+{
+	gig_dbg(DEBUG_CMD, "sending BCONN");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN);
+}
+
+/**
+ * gigaset_isdn_hupB() - signal B channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the B channel connection has
+ * been shut down.
+ */
+void gigaset_isdn_hupB(struct bc_state *bcs)
+{
+	gig_dbg(DEBUG_CMD, "sending BHUP");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP);
+}
+
+/**
+ * gigaset_isdn_start() - signal device availability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is available for
+ * use.
+ */
+void gigaset_isdn_start(struct cardstate *cs)
+{
+	gig_dbg(DEBUG_CMD, "sending RUN");
+	gigaset_i4l_cmd(cs, ISDN_STAT_RUN);
+}
+
+/**
+ * gigaset_isdn_stop() - signal device unavailability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is no longer
+ * available for use.
+ */
+void gigaset_isdn_stop(struct cardstate *cs)
+{
+	gig_dbg(DEBUG_CMD, "sending STOP");
+	gigaset_i4l_cmd(cs, ISDN_STAT_STOP);
+}
+
+/**
+ * gigaset_isdn_register() - register to LL
+ * @cs:		device descriptor structure.
+ * @isdnid:	device name.
+ *
+ * Called by main module to register the device with the LL.
+ *
+ * Return value: 1 for success, 0 for failure
+ */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+{
+	isdn_if *iif;
+
+	pr_info("ISDN4Linux interface\n");
+
+	iif = kmalloc(sizeof *iif, GFP_KERNEL);
+	if (!iif) {
+		pr_err("out of memory\n");
+		return 0;
+	}
 
 	if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index)
 	    >= sizeof iif->id) {
 		pr_err("ID too long: %s\n", isdnid);
+		kfree(iif);
 		return 0;
 	}
 
@@ -593,9 +679,26 @@
 
 	if (!register_isdn(iif)) {
 		pr_err("register_isdn failed\n");
+		kfree(iif);
 		return 0;
 	}
 
+	cs->iif = iif;
 	cs->myid = iif->channels;		/* Set my device id */
+	cs->hw_hdr_len = HW_HDR_LEN;
 	return 1;
 }
+
+/**
+ * gigaset_isdn_unregister() - unregister from LL
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to unregister the device from the LL.
+ */
+void gigaset_isdn_unregister(struct cardstate *cs)
+{
+	gig_dbg(DEBUG_CMD, "sending UNLOAD");
+	gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
+	kfree(cs->iif);
+	cs->iif = NULL;
+}
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 6a8e138..d2260b0 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -162,7 +162,7 @@
 		return -ENODEV;
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 	tty->driver_data = cs;
 
 	++cs->open_count;
@@ -171,7 +171,7 @@
 		spin_lock_irqsave(&cs->lock, flags);
 		cs->tty = tty;
 		spin_unlock_irqrestore(&cs->lock, flags);
-		tty->low_latency = 1; //FIXME test
+		tty->low_latency = 1;
 	}
 
 	mutex_unlock(&cs->mutex);
@@ -228,7 +228,7 @@
 	gig_dbg(DEBUG_IF, "%u: %s(0x%x)", cs->minor_index, __func__, cmd);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -299,9 +299,8 @@
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
-	// FIXME read from device?
 	retval = cs->control_state & (TIOCM_RTS|TIOCM_DTR);
 
 	mutex_unlock(&cs->mutex);
@@ -326,7 +325,7 @@
 		cs->minor_index, __func__, set, clear);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -356,7 +355,7 @@
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -390,7 +389,7 @@
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -455,9 +454,8 @@
 		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
 	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else {
-		//FIXME
-	}
+	else
+		gig_dbg(DEBUG_ANY, "%s: not implemented\n", __func__);
 
 	mutex_unlock(&cs->mutex);
 }
@@ -480,9 +478,8 @@
 		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
 	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else {
-		//FIXME
-	}
+	else
+		gig_dbg(DEBUG_ANY, "%s: not implemented\n", __func__);
 
 	mutex_unlock(&cs->mutex);
 }
@@ -515,10 +512,9 @@
 		goto out;
 	}
 
-	// stolen from mct_u232.c
 	iflag = tty->termios->c_iflag;
 	cflag = tty->termios->c_cflag;
-	old_cflag = old ? old->c_cflag : cflag; //FIXME?
+	old_cflag = old ? old->c_cflag : cflag;
 	gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x",
 		cs->minor_index, iflag, cflag, old_cflag);
 
@@ -588,7 +584,7 @@
 	if (!drv->have_tty)
 		return;
 
-	tasklet_init(&cs->if_wake_tasklet, &if_wake, (unsigned long) cs);
+	tasklet_init(&cs->if_wake_tasklet, if_wake, (unsigned long) cs);
 
 	mutex_lock(&cs->mutex);
 	cs->tty_dev = tty_register_device(drv->tty, cs->minor_index, NULL);
@@ -632,7 +628,8 @@
 	struct tty_struct *tty;
 
 	spin_lock_irqsave(&cs->lock, flags);
-	if ((tty = cs->tty) == NULL)
+	tty = cs->tty;
+	if (tty == NULL)
 		gig_dbg(DEBUG_ANY, "receive on closed device");
 	else {
 		tty_buffer_request_room(tty, len);
@@ -659,9 +656,9 @@
 
 	drv->have_tty = 0;
 
-	if ((drv->tty = alloc_tty_driver(minors)) == NULL)
+	drv->tty = tty = alloc_tty_driver(minors);
+	if (tty == NULL)
 		goto enomem;
-	tty = drv->tty;
 
 	tty->magic =		TTY_DRIVER_MAGIC,
 	tty->major =		GIG_MAJOR,
@@ -676,8 +673,8 @@
 
 	tty->owner =		THIS_MODULE;
 
-	tty->init_termios          = tty_std_termios; //FIXME
-	tty->init_termios.c_cflag  = B9600 | CS8 | CREAD | HUPCL | CLOCAL; //FIXME
+	tty->init_termios          = tty_std_termios;
+	tty->init_termios.c_cflag  = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	tty_set_operations(tty, &if_ops);
 
 	ret = tty_register_driver(tty);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 9f3ef7b..85394a6 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -41,7 +41,8 @@
 
 	read = iwb->read;
 	write = iwb->write;
-	if ((freebytes = read - write) > 0) {
+	freebytes = read - write;
+	if (freebytes > 0) {
 		/* no wraparound: need padding space within regular area */
 		return freebytes - BAS_OUTBUFPAD;
 	} else if (read < BAS_OUTBUFPAD) {
@@ -53,29 +54,6 @@
 	}
 }
 
-/* compare two offsets within the buffer
- * The buffer is seen as circular, with the read position as start
- * returns -1/0/1 if position a </=/> position b without crossing 'read'
- */
-static inline int isowbuf_poscmp(struct isowbuf_t *iwb, int a, int b)
-{
-	int read;
-	if (a == b)
-		return 0;
-	read = iwb->read;
-	if (a < b) {
-		if (a < read && read <= b)
-			return +1;
-		else
-			return -1;
-	} else {
-		if (b < read && read <= a)
-			return -1;
-		else
-			return +1;
-	}
-}
-
 /* start writing
  * acquire the write semaphore
  * return true if acquired, false if busy
@@ -271,7 +249,7 @@
  *        bit 14..13 = number of bits added by stuffing
  */
 static const u16 stufftab[5 * 256] = {
-// previous 1s = 0:
+/* previous 1s = 0: */
  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x201f,
  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
@@ -289,7 +267,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x0ce7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x0cef,
  0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x10f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x2ddf,
 
-// previous 1s = 1:
+/* previous 1s = 1: */
  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x200f,
  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x202f,
  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x204f,
@@ -307,7 +285,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x0ce7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x2dcf,
  0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x10f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x31ef,
 
-// previous 1s = 2:
+/* previous 1s = 2: */
  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x2007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x2017,
  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x2027, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x2037,
  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x2047, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x2057,
@@ -325,7 +303,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x2dc7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x2dd7,
  0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x31e7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x41f7,
 
-// previous 1s = 3:
+/* previous 1s = 3: */
  0x0000, 0x0001, 0x0002, 0x2003, 0x0004, 0x0005, 0x0006, 0x200b, 0x0008, 0x0009, 0x000a, 0x2013, 0x000c, 0x000d, 0x000e, 0x201b,
  0x0010, 0x0011, 0x0012, 0x2023, 0x0014, 0x0015, 0x0016, 0x202b, 0x0018, 0x0019, 0x001a, 0x2033, 0x001c, 0x001d, 0x001e, 0x203b,
  0x0020, 0x0021, 0x0022, 0x2043, 0x0024, 0x0025, 0x0026, 0x204b, 0x0028, 0x0029, 0x002a, 0x2053, 0x002c, 0x002d, 0x002e, 0x205b,
@@ -343,7 +321,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x2dc3, 0x0ce4, 0x0ce5, 0x0ce6, 0x2dcb, 0x0ce8, 0x0ce9, 0x0cea, 0x2dd3, 0x0cec, 0x0ced, 0x0cee, 0x2ddb,
  0x10f0, 0x10f1, 0x10f2, 0x31e3, 0x10f4, 0x10f5, 0x10f6, 0x31eb, 0x20f8, 0x20f9, 0x20fa, 0x41f3, 0x257c, 0x257d, 0x29be, 0x46fb,
 
-// previous 1s = 4:
+/* previous 1s = 4: */
  0x0000, 0x2001, 0x0002, 0x2005, 0x0004, 0x2009, 0x0006, 0x200d, 0x0008, 0x2011, 0x000a, 0x2015, 0x000c, 0x2019, 0x000e, 0x201d,
  0x0010, 0x2021, 0x0012, 0x2025, 0x0014, 0x2029, 0x0016, 0x202d, 0x0018, 0x2031, 0x001a, 0x2035, 0x001c, 0x2039, 0x001e, 0x203d,
  0x0020, 0x2041, 0x0022, 0x2045, 0x0024, 0x2049, 0x0026, 0x204d, 0x0028, 0x2051, 0x002a, 0x2055, 0x002c, 0x2059, 0x002e, 0x205d,
@@ -367,7 +345,8 @@
  * parameters:
  *	cin	input byte
  *	ones	number of trailing '1' bits in result before this step
- *	iwb	pointer to output buffer structure (write semaphore must be held)
+ *	iwb	pointer to output buffer structure
+ *		(write semaphore must be held)
  * return value:
  *	number of trailing '1' bits in result after this step
  */
@@ -408,7 +387,8 @@
  * parameters:
  *	in	input buffer
  *	count	number of bytes in input buffer
- *	iwb	pointer to output buffer structure (write semaphore must be held)
+ *	iwb	pointer to output buffer structure
+ *		(write semaphore must be held)
  * return value:
  *	position of end of packet in output buffer on success,
  *	-EAGAIN if write semaphore busy or buffer full
@@ -440,7 +420,8 @@
 		fcs = crc_ccitt_byte(fcs, c);
 	}
 
-	/* bitstuff and append FCS (complemented, least significant byte first) */
+	/* bitstuff and append FCS
+	 * (complemented, least significant byte first) */
 	fcs ^= 0xffff;
 	ones = hdlc_bitstuff_byte(iwb, fcs & 0x00ff, ones);
 	ones = hdlc_bitstuff_byte(iwb, (fcs >> 8) & 0x00ff, ones);
@@ -459,7 +440,8 @@
  * parameters:
  *	in	input buffer
  *	count	number of bytes in input buffer
- *	iwb	pointer to output buffer structure (write semaphore must be held)
+ *	iwb	pointer to output buffer structure
+ *		(write semaphore must be held)
  * return value:
  *	position of end of packet in output buffer on success,
  *	-EAGAIN if write semaphore busy or buffer full
@@ -500,7 +482,7 @@
 	int result;
 
 	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
+	case L2_HDLC:
 		result = hdlc_buildframe(bcs->hw.bas->isooutbuf, in, len);
 		gig_dbg(DEBUG_ISO, "%s: %d bytes HDLC -> %d",
 			__func__, len, result);
@@ -542,8 +524,9 @@
 	if (likely(bcs->skb != NULL))
 		skb_trim(bcs->skb, 0);
 	else if (!bcs->ignore) {
-		if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-			skb_reserve(bcs->skb, HW_HDR_LEN);
+		bcs->skb = dev_alloc_skb(SBUFSIZE + bcs->cs->hw_hdr_len);
+		if (bcs->skb)
+			skb_reserve(bcs->skb, bcs->cs->hw_hdr_len);
 		else
 			dev_err(bcs->cs->dev, "could not allocate skb\n");
 	}
@@ -557,43 +540,46 @@
  */
 static inline void hdlc_done(struct bc_state *bcs)
 {
+	struct cardstate *cs = bcs->cs;
 	struct sk_buff *procskb;
+	unsigned int len;
 
 	if (unlikely(bcs->ignore)) {
 		bcs->ignore--;
 		hdlc_flush(bcs);
 		return;
 	}
-
-	if ((procskb = bcs->skb) == NULL) {
+	procskb = bcs->skb;
+	if (procskb == NULL) {
 		/* previous error */
 		gig_dbg(DEBUG_ISO, "%s: skb=NULL", __func__);
-		gigaset_rcv_error(NULL, bcs->cs, bcs);
+		gigaset_isdn_rcv_err(bcs);
 	} else if (procskb->len < 2) {
-		dev_notice(bcs->cs->dev, "received short frame (%d octets)\n",
+		dev_notice(cs->dev, "received short frame (%d octets)\n",
 			   procskb->len);
 		bcs->hw.bas->runts++;
-		gigaset_rcv_error(procskb, bcs->cs, bcs);
+		dev_kfree_skb_any(procskb);
+		gigaset_isdn_rcv_err(bcs);
 	} else if (bcs->fcs != PPP_GOODFCS) {
-		dev_notice(bcs->cs->dev, "frame check error (0x%04x)\n",
-			   bcs->fcs);
+		dev_notice(cs->dev, "frame check error (0x%04x)\n", bcs->fcs);
 		bcs->hw.bas->fcserrs++;
-		gigaset_rcv_error(procskb, bcs->cs, bcs);
+		dev_kfree_skb_any(procskb);
+		gigaset_isdn_rcv_err(bcs);
 	} else {
-		procskb->len -= 2;		/* subtract FCS */
-		procskb->tail -= 2;
-		gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)",
-			__func__, procskb->len);
+		len = procskb->len;
+		__skb_trim(procskb, len -= 2);	/* subtract FCS */
+		gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)", __func__, len);
 		dump_bytes(DEBUG_STREAM_DUMP,
-			   "rcv data", procskb->data, procskb->len);
-		bcs->hw.bas->goodbytes += procskb->len;
-		gigaset_rcv_skb(procskb, bcs->cs, bcs);
+			   "rcv data", procskb->data, len);
+		bcs->hw.bas->goodbytes += len;
+		gigaset_skb_rcvd(bcs, procskb);
 	}
 
-	if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-		skb_reserve(bcs->skb, HW_HDR_LEN);
+	bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
+	if (bcs->skb)
+		skb_reserve(bcs->skb, cs->hw_hdr_len);
 	else
-		dev_err(bcs->cs->dev, "could not allocate skb\n");
+		dev_err(cs->dev, "could not allocate skb\n");
 	bcs->fcs = PPP_INITFCS;
 }
 
@@ -610,12 +596,8 @@
 
 	dev_notice(bcs->cs->dev, "received partial byte (%d bits)\n", inbits);
 	bcs->hw.bas->alignerrs++;
-	gigaset_rcv_error(bcs->skb, bcs->cs, bcs);
-
-	if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-		skb_reserve(bcs->skb, HW_HDR_LEN);
-	else
-		dev_err(bcs->cs->dev, "could not allocate skb\n");
+	gigaset_isdn_rcv_err(bcs);
+	__skb_trim(bcs->skb, 0);
 	bcs->fcs = PPP_INITFCS;
 }
 
@@ -646,10 +628,10 @@
 };
 
 /* hdlc_unpack
- * perform HDLC frame processing (bit unstuffing, flag detection, FCS calculation)
- * on a sequence of received data bytes (8 bits each, LSB first)
- * pass on successfully received, complete frames as SKBs via gigaset_rcv_skb
- * notify of errors via gigaset_rcv_error
+ * perform HDLC frame processing (bit unstuffing, flag detection, FCS
+ * calculation) on a sequence of received data bytes (8 bits each, LSB first)
+ * pass on successfully received, complete frames as SKBs via gigaset_skb_rcvd
+ * notify of errors via gigaset_isdn_rcv_err
  * tally frames, errors etc. in BC structure counters
  * parameters:
  *	src	received data
@@ -665,9 +647,12 @@
 
 	/* load previous state:
 	 * inputstate = set of flag bits:
-	 * - INS_flag_hunt: no complete opening flag received since connection setup or last abort
-	 * - INS_have_data: at least one complete data byte received since last flag
-	 * seqlen = number of consecutive '1' bits in last 7 input stream bits (0..7)
+	 * - INS_flag_hunt: no complete opening flag received since connection
+	 *                  setup or last abort
+	 * - INS_have_data: at least one complete data byte received since last
+	 *                  flag
+	 * seqlen = number of consecutive '1' bits in last 7 input stream bits
+	 *          (0..7)
 	 * inbyte = accumulated partial data byte (if !INS_flag_hunt)
 	 * inbits = number of valid bits in inbyte, starting at LSB (0..6)
 	 */
@@ -701,9 +686,11 @@
 				inbyte = c >> (lead1 + 1);
 				inbits = 7 - lead1;
 				if (trail1 >= 8) {
-					/* interior stuffing: omitting the MSB handles most cases */
+					/* interior stuffing:
+					 * omitting the MSB handles most cases,
+					 * correct the incorrectly handled
+					 * cases individually */
 					inbits--;
-					/* correct the incorrectly handled cases individually */
 					switch (c) {
 					case 0xbe:
 						inbyte = 0x3f;
@@ -729,13 +716,14 @@
 			hdlc_flush(bcs);
 			inputstate |= INS_flag_hunt;
 		} else if (seqlen == 6) {
-			/* closing flag, including (6 - lead1) '1's and one '0' from inbits */
+			/* closing flag, including (6 - lead1) '1's
+			 * and one '0' from inbits */
 			if (inbits > 7 - lead1) {
 				hdlc_frag(bcs, inbits + lead1 - 7);
 				inputstate &= ~INS_have_data;
 			} else {
 				if (inbits < 7 - lead1)
-					ubc->stolen0s ++;
+					ubc->stolen0s++;
 				if (inputstate & INS_have_data) {
 					hdlc_done(bcs);
 					inputstate &= ~INS_have_data;
@@ -744,7 +732,7 @@
 
 			if (c == PPP_FLAG) {
 				/* complete flag, LSB overlaps preceding flag */
-				ubc->shared0s ++;
+				ubc->shared0s++;
 				inbits = 0;
 				inbyte = 0;
 			} else if (trail1 != 7) {
@@ -752,9 +740,11 @@
 				inbyte = c >> (lead1 + 1);
 				inbits = 7 - lead1;
 				if (trail1 >= 8) {
-					/* interior stuffing: omitting the MSB handles most cases */
+					/* interior stuffing:
+					 * omitting the MSB handles most cases,
+					 * correct the incorrectly handled
+					 * cases individually */
 					inbits--;
-					/* correct the incorrectly handled cases individually */
 					switch (c) {
 					case 0xbe:
 						inbyte = 0x3f;
@@ -762,7 +752,8 @@
 					}
 				}
 			} else {
-				/* abort sequence follows, skb already empty anyway */
+				/* abort sequence follows,
+				 * skb already empty anyway */
 				ubc->aborts++;
 				inputstate |= INS_flag_hunt;
 			}
@@ -787,14 +778,17 @@
 			} else {
 				/* stuffed data */
 				if (trail1 < 7) { /* => seqlen == 5 */
-					/* stuff bit at position lead1, no interior stuffing */
+					/* stuff bit at position lead1,
+					 * no interior stuffing */
 					unsigned char mask = (1 << lead1) - 1;
 					c = (c & mask) | ((c & ~mask) >> 1);
 					inbyte |= c << inbits;
 					inbits += 7;
 				} else if (seqlen < 5) { /* trail1 >= 8 */
-					/* interior stuffing: omitting the MSB handles most cases */
-					/* correct the incorrectly handled cases individually */
+					/* interior stuffing:
+					 * omitting the MSB handles most cases,
+					 * correct the incorrectly handled
+					 * cases individually */
 					switch (c) {
 					case 0xbe:
 						c = 0x7e;
@@ -804,8 +798,9 @@
 					inbits += 7;
 				} else { /* seqlen == 5 && trail1 >= 8 */
 
-					/* stuff bit at lead1 *and* interior stuffing */
-					switch (c) {	/* unstuff individually */
+					/* stuff bit at lead1 *and* interior
+					 * stuffing -- unstuff individually */
+					switch (c) {
 					case 0x7d:
 						c = 0x3f;
 						break;
@@ -841,7 +836,7 @@
 }
 
 /* trans_receive
- * pass on received USB frame transparently as SKB via gigaset_rcv_skb
+ * pass on received USB frame transparently as SKB via gigaset_skb_rcvd
  * invert bytes
  * tally frames, errors etc. in BC structure counters
  * parameters:
@@ -852,6 +847,7 @@
 static inline void trans_receive(unsigned char *src, unsigned count,
 				 struct bc_state *bcs)
 {
+	struct cardstate *cs = bcs->cs;
 	struct sk_buff *skb;
 	int dobytes;
 	unsigned char *dst;
@@ -861,13 +857,14 @@
 		hdlc_flush(bcs);
 		return;
 	}
-	if (unlikely((skb = bcs->skb) == NULL)) {
-		bcs->skb = skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN);
+	skb = bcs->skb;
+	if (unlikely(skb == NULL)) {
+		bcs->skb = skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
 		if (!skb) {
-			dev_err(bcs->cs->dev, "could not allocate skb\n");
+			dev_err(cs->dev, "could not allocate skb\n");
 			return;
 		}
-		skb_reserve(skb, HW_HDR_LEN);
+		skb_reserve(skb, cs->hw_hdr_len);
 	}
 	bcs->hw.bas->goodbytes += skb->len;
 	dobytes = TRANSBUFSIZE - skb->len;
@@ -881,23 +878,24 @@
 		if (dobytes == 0) {
 			dump_bytes(DEBUG_STREAM_DUMP,
 				   "rcv data", skb->data, skb->len);
-			gigaset_rcv_skb(skb, bcs->cs, bcs);
-			bcs->skb = skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN);
+			gigaset_skb_rcvd(bcs, skb);
+			bcs->skb = skb =
+				dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
 			if (!skb) {
-				dev_err(bcs->cs->dev,
-					"could not allocate skb\n");
+				dev_err(cs->dev, "could not allocate skb\n");
 				return;
 			}
-			skb_reserve(bcs->skb, HW_HDR_LEN);
+			skb_reserve(skb, cs->hw_hdr_len);
 			dobytes = TRANSBUFSIZE;
 		}
 	}
 }
 
-void gigaset_isoc_receive(unsigned char *src, unsigned count, struct bc_state *bcs)
+void gigaset_isoc_receive(unsigned char *src, unsigned count,
+			  struct bc_state *bcs)
 {
 	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
+	case L2_HDLC:
 		hdlc_unpack(src, count, bcs);
 		break;
 	default:		/* assume transparent */
@@ -981,8 +979,10 @@
  * @bcs:	B channel descriptor structure.
  * @skb:	data to send.
  *
- * Called by i4l.c to queue an skb for sending, and start transmission if
+ * Called by LL to queue an skb for sending, and start transmission if
  * necessary.
+ * Once the payload data has been transmitted completely, gigaset_skb_sent()
+ * will be called with the skb's link layer header preserved.
  *
  * Return value:
  *	number of bytes accepted for sending (skb->len) if ok,
diff --git a/drivers/isdn/gigaset/proc.c b/drivers/isdn/gigaset/proc.c
index 9715aad..758a00c 100644
--- a/drivers/isdn/gigaset/proc.c
+++ b/drivers/isdn/gigaset/proc.c
@@ -39,7 +39,7 @@
 			return -EINVAL;
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	cs->waiting = 1;
 	if (!gigaset_add_event(cs, &cs->at_state, EV_PROC_CIDMODE,
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 3071a52..168d585 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -164,9 +164,15 @@
 {
 	struct cardstate *cs = (struct cardstate *) data;
 	struct bc_state *bcs;
+	struct sk_buff *nextskb;
 	int sent = 0;
 
-	if (!cs || !(bcs = cs->bcs)) {
+	if (!cs) {
+		gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
+		return;
+	}
+	bcs = cs->bcs;
+	if (!bcs) {
 		gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
 		return;
 	}
@@ -179,9 +185,11 @@
 			return;
 
 		/* no command to send; get skb */
-		if (!(bcs->tx_skb = skb_dequeue(&bcs->squeue)))
+		nextskb = skb_dequeue(&bcs->squeue);
+		if (!nextskb)
 			/* no skb either, nothing to do */
 			return;
+		bcs->tx_skb = nextskb;
 
 		gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)",
 			(unsigned long) bcs->tx_skb);
@@ -236,19 +244,20 @@
  *	number of bytes queued, or error code < 0
  */
 static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
-                             int len, struct tasklet_struct *wake_tasklet)
+			     int len, struct tasklet_struct *wake_tasklet)
 {
 	struct cmdbuf_t *cb;
 	unsigned long flags;
 
 	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
-	                     DEBUG_TRANSCMD : DEBUG_LOCKCMD,
-	                   "CMD Transmit", len, buf);
+				DEBUG_TRANSCMD : DEBUG_LOCKCMD,
+			   "CMD Transmit", len, buf);
 
 	if (len <= 0)
 		return 0;
 
-	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+	cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
+	if (!cb) {
 		dev_err(cs->dev, "%s: out of memory!\n", __func__);
 		return -ENOMEM;
 	}
@@ -392,7 +401,6 @@
 	struct platform_device *pdev = to_platform_device(dev);
 
 	/* adapted from platform_device_release() in drivers/base/platform.c */
-	//FIXME is this actually necessary?
 	kfree(dev->platform_data);
 	kfree(pdev->resource);
 }
@@ -404,16 +412,20 @@
 static int gigaset_initcshw(struct cardstate *cs)
 {
 	int rc;
+	struct ser_cardstate *scs;
 
-	if (!(cs->hw.ser = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL))) {
+	scs = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL);
+	if (!scs) {
 		pr_err("out of memory\n");
 		return 0;
 	}
+	cs->hw.ser = scs;
 
 	cs->hw.ser->dev.name = GIGASET_MODULENAME;
 	cs->hw.ser->dev.id = cs->minor_index;
 	cs->hw.ser->dev.dev.release = gigaset_device_release;
-	if ((rc = platform_device_register(&cs->hw.ser->dev)) != 0) {
+	rc = platform_device_register(&cs->hw.ser->dev);
+	if (rc != 0) {
 		pr_err("error %d registering platform device\n", rc);
 		kfree(cs->hw.ser);
 		cs->hw.ser = NULL;
@@ -422,7 +434,7 @@
 	dev_set_drvdata(&cs->hw.ser->dev.dev, cs);
 
 	tasklet_init(&cs->write_tasklet,
-	             &gigaset_modem_fill, (unsigned long) cs);
+		     gigaset_modem_fill, (unsigned long) cs);
 	return 1;
 }
 
@@ -434,7 +446,8 @@
  * Called by "gigaset_start" and "gigaset_enterconfigmode" in common.c
  * and by "if_lock" and "if_termios" in interface.c
  */
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, unsigned new_state)
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
+				  unsigned new_state)
 {
 	struct tty_struct *tty = cs->hw.ser->tty;
 	unsigned int set, clear;
@@ -520,8 +533,8 @@
 	}
 
 	/* allocate memory for our device state and intialize it */
-	if (!(cs = gigaset_initcs(driver, 1, 1, 0, cidmode,
-				  GIGASET_MODULENAME)))
+	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
+	if (!cs)
 		goto error;
 
 	cs->dev = &cs->hw.ser->dev.dev;
@@ -690,7 +703,8 @@
 
 	if (!cs)
 		return;
-	if (!(inbuf = cs->inbuf)) {
+	inbuf = cs->inbuf;
+	if (!inbuf) {
 		dev_err(cs->dev, "%s: no inbuf\n", __func__);
 		cs_put(cs);
 		return;
@@ -770,18 +784,21 @@
 	int rc;
 
 	gig_dbg(DEBUG_INIT, "%s", __func__);
-	if ((rc = platform_driver_register(&device_driver)) != 0) {
+	rc = platform_driver_register(&device_driver);
+	if (rc != 0) {
 		pr_err("error %d registering platform driver\n", rc);
 		return rc;
 	}
 
 	/* allocate memory for our driver state and intialize it */
-	if (!(driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
 					  GIGASET_MODULENAME, GIGASET_DEVNAME,
-					  &ops, THIS_MODULE)))
+					  &ops, THIS_MODULE);
+	if (!driver)
 		goto error;
 
-	if ((rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc)) != 0) {
+	rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc);
+	if (rc != 0) {
 		pr_err("error %d registering line discipline\n", rc);
 		goto error;
 	}
@@ -808,7 +825,8 @@
 		driver = NULL;
 	}
 
-	if ((rc = tty_unregister_ldisc(N_GIGASET_M101)) != 0)
+	rc = tty_unregister_ldisc(N_GIGASET_M101);
+	if (rc != 0)
 		pr_err("error %d unregistering line discipline\n", rc);
 
 	platform_driver_unregister(&device_driver);
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 4deb1ab0..3ab1dae 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -43,14 +43,14 @@
 #define GIGASET_MODULENAME "usb_gigaset"
 #define GIGASET_DEVNAME    "ttyGU"
 
-#define IF_WRITEBUF 2000 //FIXME  // WAKEUP_CHARS: 256
+#define IF_WRITEBUF 2000	/* arbitrary limit */
 
 /* Values for the Gigaset M105 Data */
 #define USB_M105_VENDOR_ID	0x0681
 #define USB_M105_PRODUCT_ID	0x0009
 
 /* table of devices that work with this driver */
-static const struct usb_device_id gigaset_table [] = {
+static const struct usb_device_id gigaset_table[] = {
 	{ USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -97,8 +97,8 @@
  *       41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
  *            Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
  *            xx is usually 0x00 but was 0x7e before starting data transfer
- *            in unimodem mode. So, this might be an array of characters that need
- *            special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
+ *            in unimodem mode. So, this might be an array of characters that
+ *            need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
  *
  * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
  * flags per packet.
@@ -114,7 +114,7 @@
 static int gigaset_resume(struct usb_interface *intf);
 static int gigaset_pre_reset(struct usb_interface *intf);
 
-static struct gigaset_driver *driver = NULL;
+static struct gigaset_driver *driver;
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver gigaset_usb_driver = {
@@ -141,6 +141,7 @@
 	struct urb		*bulk_out_urb;
 
 	/* Input buffer */
+	unsigned char		*rcvbuf;
 	int			rcvbuf_size;
 	struct urb		*read_urb;
 	__u8			int_in_endpointAddr;
@@ -164,13 +165,11 @@
 	val = tiocm_to_gigaset(new_state);
 
 	gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
-	// don't use this in an interrupt/BH
 	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
 			    (val & 0xff) | ((mask & 0xff) << 8), 0,
 			    NULL, 0, 2000 /* timeout? */);
 	if (r < 0)
 		return r;
-	//..
 	return 0;
 }
 
@@ -220,7 +219,6 @@
 	cflag &= CBAUD;
 
 	switch (cflag) {
-	//FIXME more values?
 	case    B300: rate =     300; break;
 	case    B600: rate =     600; break;
 	case   B1200: rate =    1200; break;
@@ -273,7 +271,7 @@
 	/* set the number of stop bits */
 	if (cflag & CSTOPB) {
 		if ((cflag & CSIZE) == CS5)
-			val |= 1; /* 1.5 stop bits */ //FIXME is this okay?
+			val |= 1; /* 1.5 stop bits */
 		else
 			val |= 2; /* 2 stop bits */
 	}
@@ -282,7 +280,7 @@
 }
 
 
- /*================================================================================================================*/
+/*============================================================================*/
 static int gigaset_init_bchannel(struct bc_state *bcs)
 {
 	/* nothing to do for M10x */
@@ -344,7 +342,6 @@
 			if (write_modem(cs) < 0) {
 				gig_dbg(DEBUG_OUTPUT,
 					"modem_fill: write_modem failed");
-				// FIXME should we tell the LL?
 				again = 1; /* no callback will be called! */
 			}
 		}
@@ -356,8 +353,8 @@
  */
 static void gigaset_read_int_callback(struct urb *urb)
 {
-	struct inbuf_t *inbuf = urb->context;
-	struct cardstate *cs = inbuf->cs;
+	struct cardstate *cs = urb->context;
+	struct inbuf_t *inbuf = cs->inbuf;
 	int status = urb->status;
 	int r;
 	unsigned numbytes;
@@ -368,7 +365,7 @@
 		numbytes = urb->actual_length;
 
 		if (numbytes) {
-			src = inbuf->rcvbuf;
+			src = cs->hw.usb->rcvbuf;
 			if (unlikely(*src))
 				dev_warn(cs->dev,
 				    "%s: There was no leading 0, but 0x%02x!\n",
@@ -440,7 +437,7 @@
 	struct cmdbuf_t *tcb;
 	unsigned long flags;
 	int count;
-	int status = -ENOENT; // FIXME
+	int status = -ENOENT;
 	struct usb_cardstate *ucs = cs->hw.usb;
 
 	do {
@@ -480,7 +477,9 @@
 			ucs->busy = 1;
 
 			spin_lock_irqsave(&cs->lock, flags);
-			status = cs->connected ? usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) : -ENODEV;
+			status = cs->connected ?
+				usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
+				-ENODEV;
 			spin_unlock_irqrestore(&cs->lock, flags);
 
 			if (status) {
@@ -510,8 +509,8 @@
 
 	if (len <= 0)
 		return 0;
-
-	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+	cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
+	if (!cb) {
 		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		return -ENOMEM;
 	}
@@ -615,7 +614,7 @@
 	ucs->bulk_out_urb = NULL;
 	ucs->read_urb = NULL;
 	tasklet_init(&cs->write_tasklet,
-		     &gigaset_modem_fill, (unsigned long) cs);
+		     gigaset_modem_fill, (unsigned long) cs);
 
 	return 1;
 }
@@ -637,9 +636,7 @@
 		return -EINVAL;
 	}
 
-	/* Copy data to bulk out buffer and  // FIXME copying not necessary
-	 * transmit data
-	 */
+	/* Copy data to bulk out buffer and transmit data */
 	count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
 	skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
 	skb_pull(bcs->tx_skb, count);
@@ -650,7 +647,8 @@
 	if (cs->connected) {
 		usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
 				  usb_sndbulkpipe(ucs->udev,
-						  ucs->bulk_out_endpointAddr & 0x0f),
+						  ucs->bulk_out_endpointAddr &
+						  0x0f),
 				  ucs->bulk_out_buffer, count,
 				  gigaset_write_bulk_callback, cs);
 		ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
@@ -666,7 +664,7 @@
 
 	if (!bcs->tx_skb->len) {
 		/* skb sent completely */
-		gigaset_skb_sent(bcs, bcs->tx_skb); //FIXME also, when ret<0?
+		gigaset_skb_sent(bcs, bcs->tx_skb);
 
 		gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
 			(unsigned long) bcs->tx_skb);
@@ -763,8 +761,8 @@
 	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 	ucs->rcvbuf_size = buffer_size;
 	ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
-	cs->inbuf[0].rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
-	if (!cs->inbuf[0].rcvbuf) {
+	ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
+	if (!ucs->rcvbuf) {
 		dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
 		retval = -ENOMEM;
 		goto error;
@@ -773,9 +771,9 @@
 	usb_fill_int_urb(ucs->read_urb, udev,
 			 usb_rcvintpipe(udev,
 					endpoint->bEndpointAddress & 0x0f),
-			 cs->inbuf[0].rcvbuf, buffer_size,
+			 ucs->rcvbuf, buffer_size,
 			 gigaset_read_int_callback,
-			 cs->inbuf + 0, endpoint->bInterval);
+			 cs, endpoint->bInterval);
 
 	retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
 	if (retval) {
@@ -789,7 +787,7 @@
 
 	if (!gigaset_start(cs)) {
 		tasklet_kill(&cs->write_tasklet);
-		retval = -ENODEV; //FIXME
+		retval = -ENODEV;
 		goto error;
 	}
 	return 0;
@@ -798,11 +796,11 @@
 	usb_kill_urb(ucs->read_urb);
 	kfree(ucs->bulk_out_buffer);
 	usb_free_urb(ucs->bulk_out_urb);
-	kfree(cs->inbuf[0].rcvbuf);
+	kfree(ucs->rcvbuf);
 	usb_free_urb(ucs->read_urb);
 	usb_set_intfdata(interface, NULL);
 	ucs->read_urb = ucs->bulk_out_urb = NULL;
-	cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
+	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
 	usb_put_dev(ucs->udev);
 	ucs->udev = NULL;
 	ucs->interface = NULL;
@@ -831,10 +829,10 @@
 
 	kfree(ucs->bulk_out_buffer);
 	usb_free_urb(ucs->bulk_out_urb);
-	kfree(cs->inbuf[0].rcvbuf);
+	kfree(ucs->rcvbuf);
 	usb_free_urb(ucs->read_urb);
 	ucs->read_urb = ucs->bulk_out_urb = NULL;
-	cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
+	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
 
 	usb_put_dev(ucs->udev);
 	ucs->interface = NULL;
@@ -916,9 +914,10 @@
 	int result;
 
 	/* allocate memory for our driver state and intialize it */
-	if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				       GIGASET_MODULENAME, GIGASET_DEVNAME,
-				       &ops, THIS_MODULE)) == NULL)
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+				    GIGASET_MODULENAME, GIGASET_DEVNAME,
+				    &ops, THIS_MODULE);
+	if (driver == NULL)
 		goto error;
 
 	/* register this driver with the USB subsystem */
diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c
index c725655..5a6ae64 100644
--- a/drivers/isdn/hardware/avm/avm_cs.c
+++ b/drivers/isdn/hardware/avm/avm_cs.c
@@ -111,8 +111,6 @@
     p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-    p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -198,7 +196,6 @@
 	 */
 	i = pcmcia_request_irq(link, &link->irq);
 	if (i != 0) {
-	    cs_error(link, RequestIRQ, i);
 	    /* undo */
 	    pcmcia_disable_device(link);
 	    break;
@@ -209,7 +206,6 @@
 	  */
 	i = pcmcia_request_configuration(link, &link->conf);
 	if (i != 0) {
-	    cs_error(link, RequestConfiguration, i);
 	    pcmcia_disable_device(link);
 	    break;
 	}
diff --git a/drivers/isdn/hardware/mISDN/speedfax.c b/drivers/isdn/hardware/mISDN/speedfax.c
index ff3a4e2..7726afd 100644
--- a/drivers/isdn/hardware/mISDN/speedfax.c
+++ b/drivers/isdn/hardware/mISDN/speedfax.c
@@ -110,6 +110,7 @@
 MODULE_AUTHOR("Karsten Keil");
 MODULE_LICENSE("GPL v2");
 MODULE_VERSION(SPEEDFAX_REV);
+MODULE_FIRMWARE("isdn/ISAR.BIN");
 module_param_call(debug, set_debug, param_get_uint, &debug, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Speedfax debug mask");
 module_param(irqloops, uint, S_IRUGO | S_IWUSR);
diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 23560c8..f9bdff3 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -30,22 +30,6 @@
 MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"avma1_cs.c 1.00 1998/01/23 10:00:00 (Carsten Paeth)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -119,7 +103,7 @@
 {
     local_info_t *local;
 
-    DEBUG(0, "avma1cs_attach()\n");
+    dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -139,8 +123,6 @@
     p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-    p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -161,7 +143,7 @@
 
 static void avma1cs_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "avma1cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
 	avma1cs_release(link);
 	kfree(link->priv);
 } /* avma1cs_detach */
@@ -203,7 +185,7 @@
 
     dev = link->priv;
 
-    DEBUG(0, "avma1cs_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "avma1cs_config(0x%p)\n", link);
 
     devname[0] = 0;
     if (link->prod_id[1])
@@ -218,7 +200,6 @@
 	 */
 	i = pcmcia_request_irq(link, &link->irq);
 	if (i != 0) {
-	    cs_error(link, RequestIRQ, i);
 	    /* undo */
 	    pcmcia_disable_device(link);
 	    break;
@@ -229,7 +210,6 @@
 	 */
 	i = pcmcia_request_configuration(link, &link->conf);
 	if (i != 0) {
-	    cs_error(link, RequestConfiguration, i);
 	    pcmcia_disable_device(link);
 	    break;
 	}
@@ -281,7 +261,7 @@
 {
 	local_info_t *local = link->priv;
 
-	DEBUG(0, "avma1cs_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "avma1cs_release(0x%p)\n", link);
 
 	/* now unregister function with hisax */
 	HiSax_closecard(local->node.minor);
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index f4d0fe2..a2f709f 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -57,23 +57,6 @@
 MODULE_AUTHOR("Klaus Lichtenwalder");
 MODULE_LICENSE("Dual MPL/GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"elsa_cs.c $Revision: 1.2.2.4 $ $Date: 2004/01/25 15:07:06 $ (K.Lichtenwalder)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -142,7 +125,7 @@
 {
     local_info_t *local;
 
-    DEBUG(0, "elsa_cs_attach()\n");
+    dev_dbg(&link->dev, "elsa_cs_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -155,7 +138,6 @@
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
     link->irq.Handler = NULL;
 
     /*
@@ -188,7 +170,7 @@
 {
 	local_info_t *info = link->priv;
 
-	DEBUG(0, "elsa_cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "elsa_cs_detach(0x%p)\n", link);
 
 	info->busy = 1;
 	elsa_cs_release(link);
@@ -231,30 +213,25 @@
 static int elsa_cs_config(struct pcmcia_device *link)
 {
     local_info_t *dev;
-    int i, last_fn;
+    int i;
     IsdnCard_t icard;
 
-    DEBUG(0, "elsa_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "elsa_config(0x%p)\n", link);
     dev = link->priv;
 
     i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL);
-    if (i != 0) {
-	last_fn = RequestIO;
-	goto cs_failed;
-    }
+    if (i != 0)
+	goto failed;
 
     i = pcmcia_request_irq(link, &link->irq);
     if (i != 0) {
         link->irq.AssignedIRQ = 0;
-	last_fn = RequestIRQ;
-        goto cs_failed;
+	goto failed;
     }
 
     i = pcmcia_request_configuration(link, &link->conf);
-    if (i != 0) {
-      last_fn = RequestConfiguration;
-      goto cs_failed;
-    }
+    if (i != 0)
+	goto failed;
 
     /* At this point, the dev_node_t structure(s) should be
        initialized and arranged in a linked list at link->dev. *//*  */
@@ -290,8 +267,7 @@
     	((local_info_t*)link->priv)->cardnr = i;
 
     return 0;
-cs_failed:
-    cs_error(link, last_fn, i);
+failed:
     elsa_cs_release(link);
     return -ENODEV;
 } /* elsa_cs_config */
@@ -308,7 +284,7 @@
 {
     local_info_t *local = link->priv;
 
-    DEBUG(0, "elsa_cs_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "elsa_cs_release(0x%p)\n", link);
 
     if (local) {
     	if (local->cardnr >= 0) {
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 9a3c9f5..af5d393 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -57,24 +57,6 @@
 MODULE_AUTHOR("Marcus Niemann");
 MODULE_LICENSE("Dual MPL/GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); 
-static char *version =
-"sedlbauer_cs.c 1.1a 2001/01/28 15:04:04 (M.Niemann)";
-#else
-#define DEBUG(n, args...)
-#endif
-
 
 /*====================================================================*/
 
@@ -151,7 +133,7 @@
 {
     local_info_t *local;
 
-    DEBUG(0, "sedlbauer_attach()\n");
+    dev_dbg(&link->dev, "sedlbauer_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -163,7 +145,6 @@
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = NULL;
 
     /*
@@ -198,7 +179,7 @@
 
 static void sedlbauer_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "sedlbauer_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
 
 	((local_info_t *)link->priv)->stop = 1;
 	sedlbauer_release(link);
@@ -214,9 +195,6 @@
     device available to the system.
     
 ======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  cistpl_cftable_entry_t *dflt,
@@ -293,11 +271,11 @@
 		req->Base = mem->win[0].host_addr;
 		req->Size = mem->win[0].len;
 		req->AccessSpeed = 0;
-		if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
 			return -ENODEV;
 		map.Page = 0;
 		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
 			return -ENODEV;
 	}
 	return 0;
@@ -309,10 +287,10 @@
 {
     local_info_t *dev = link->priv;
     win_req_t *req;
-    int last_fn, last_ret;
+    int ret;
     IsdnCard_t  icard;
 
-    DEBUG(0, "sedlbauer_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
 
     req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
     if (!req)
@@ -330,8 +308,8 @@
       these things without consulting the CIS, and most client drivers
       will only use the CIS to fill in implementation-defined details.
     */
-    last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
-    if (last_ret)
+    ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+    if (ret)
 	    goto failed;
 
     /*
@@ -339,15 +317,20 @@
        handler to the interrupt, unless the 'Handler' member of the
        irq structure is initialized.
     */
-    if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+    if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+	    ret = pcmcia_request_irq(link, &link->irq);
+	    if (ret)
+		    goto failed;
+    }
 	
     /*
        This actually configures the PCMCIA socket -- setting up
        the I/O windows and the interrupt mapping, and putting the
        card and host interface into "Memory and IO" mode.
     */
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     /*
       At this point, the dev_node_t structure(s) need to be
@@ -380,19 +363,18 @@
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
     
-    last_ret = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->stop), &icard);
-    if (last_ret < 0) {
-    	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
-    		last_ret, link->io.BasePort1);
+    ret = hisax_init_pcmcia(link, 
+			    &(((local_info_t *)link->priv)->stop), &icard);
+    if (ret < 0) {
+	printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
+		ret, link->io.BasePort1);
     	sedlbauer_release(link);
 	return -ENODEV;
     } else
-    	((local_info_t*)link->priv)->cardnr = last_ret;
+	((local_info_t *)link->priv)->cardnr = ret;
 
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     sedlbauer_release(link);
     return -ENODEV;
@@ -410,7 +392,7 @@
 static void sedlbauer_release(struct pcmcia_device *link)
 {
     local_info_t *local = link->priv;
-    DEBUG(0, "sedlbauer_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "sedlbauer_release(0x%p)\n", link);
 
     if (local) {
     	if (local->cardnr >= 0) {
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 623d111..ea70539 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -38,23 +38,6 @@
 MODULE_AUTHOR("Christof Petig, christof.petig@wtal.de, Karsten Keil, kkeil@suse.de");
 MODULE_LICENSE("GPL");
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-static char *version =
-"teles_cs.c 2.10 2002/07/30 22:23:34 kkeil";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -133,7 +116,7 @@
 {
     local_info_t *local;
 
-    DEBUG(0, "teles_attach()\n");
+    dev_dbg(&link->dev, "teles_attach()\n");
 
     /* Allocate space for private device-specific data */
     local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
@@ -145,7 +128,6 @@
 
     /* Interrupt setup */
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID|IRQ_SHARE_ID;
     link->irq.Handler = NULL;
 
     /*
@@ -178,7 +160,7 @@
 {
 	local_info_t *info = link->priv;
 
-	DEBUG(0, "teles_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "teles_detach(0x%p)\n", link);
 
 	info->busy = 1;
 	teles_cs_release(link);
@@ -221,30 +203,25 @@
 static int teles_cs_config(struct pcmcia_device *link)
 {
     local_info_t *dev;
-    int i, last_fn;
+    int i;
     IsdnCard_t icard;
 
-    DEBUG(0, "teles_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "teles_config(0x%p)\n", link);
     dev = link->priv;
 
     i = pcmcia_loop_config(link, teles_cs_configcheck, NULL);
-    if (i != 0) {
-	last_fn = RequestIO;
+    if (i != 0)
 	goto cs_failed;
-    }
 
     i = pcmcia_request_irq(link, &link->irq);
     if (i != 0) {
         link->irq.AssignedIRQ = 0;
-	last_fn = RequestIRQ;
         goto cs_failed;
     }
 
     i = pcmcia_request_configuration(link, &link->conf);
-    if (i != 0) {
-      last_fn = RequestConfiguration;
+    if (i != 0)
       goto cs_failed;
-    }
 
     /* At this point, the dev_node_t structure(s) should be
        initialized and arranged in a linked list at link->dev. *//*  */
@@ -283,7 +260,6 @@
     return 0;
 
 cs_failed:
-    cs_error(link, last_fn, i);
     teles_cs_release(link);
     return -ENODEV;
 } /* teles_cs_config */
@@ -300,7 +276,7 @@
 {
     local_info_t *local = link->priv;
 
-    DEBUG(0, "teles_cs_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "teles_cs_release(0x%p)\n", link);
 
     if (local) {
     	if (local->cardnr >= 0) {
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index feb0fa4..fcfe17a 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -779,7 +779,7 @@
 }
 
 static int
-mISDN_sock_create(struct net *net, struct socket *sock, int proto)
+mISDN_sock_create(struct net *net, struct socket *sock, int proto, int kern)
 {
 	int err = -EPROTONOSUPPORT;
 
@@ -808,8 +808,7 @@
 	return err;
 }
 
-static struct
-net_proto_family mISDN_sock_family_ops = {
+static const struct net_proto_family mISDN_sock_family_ops = {
 	.owner  = THIS_MODULE,
 	.family = PF_ISDN,
 	.create = mISDN_sock_create,
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index 4460507..b982603 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 
 /*
  * Our context
diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
index 5d91362..1f7c10f 100644
--- a/drivers/leds/leds-locomo.c
+++ b/drivers/leds/leds-locomo.c
@@ -44,7 +44,7 @@
 
 static struct led_classdev locomo_led0 = {
 	.name			= "locomo:amber:charge",
-	.default_trigger	= "sharpsl-charge",
+	.default_trigger	= "main-battery-charging",
 	.brightness_set		= locomoled_brightness_set0,
 };
 
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index cc9f275..7b4ef5b 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -27,54 +27,49 @@
 /* file(s) in /proc/sys/dev/mac_hid */
 static ctl_table mac_hid_files[] = {
 	{
-		.ctl_name	= DEV_MAC_HID_MOUSE_BUTTON_EMULATION,
 		.procname	= "mouse_button_emulation",
 		.data		= &mouse_emulate_buttons,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE,
 		.procname	= "mouse_button2_keycode",
 		.data		= &mouse_button2_keycode,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE,
 		.procname	= "mouse_button3_keycode",
 		.data		= &mouse_button3_keycode,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 /* dir in /proc/sys/dev */
 static ctl_table mac_hid_dir[] = {
 	{
-		.ctl_name	= DEV_MAC_HID,
 		.procname	= "mac_hid",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= mac_hid_files,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 /* /proc/sys/dev itself, in case that is not there yet */
 static ctl_table mac_hid_root_dir[] = {
 	{
-		.ctl_name	= CTL_DEV,
 		.procname	= "dev",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= mac_hid_dir,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header *mac_hid_sysctl_header;
diff --git a/drivers/md/md.c b/drivers/md/md.c
index b182f86..5f154ef 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -98,44 +98,40 @@
 
 static ctl_table raid_table[] = {
 	{
-		.ctl_name	= DEV_RAID_SPEED_LIMIT_MIN,
 		.procname	= "speed_limit_min",
 		.data		= &sysctl_speed_limit_min,
 		.maxlen		= sizeof(int),
 		.mode		= S_IRUGO|S_IWUSR,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= DEV_RAID_SPEED_LIMIT_MAX,
 		.procname	= "speed_limit_max",
 		.data		= &sysctl_speed_limit_max,
 		.maxlen		= sizeof(int),
 		.mode		= S_IRUGO|S_IWUSR,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table raid_dir_table[] = {
 	{
-		.ctl_name	= DEV_RAID,
 		.procname	= "raid",
 		.maxlen		= 0,
 		.mode		= S_IRUGO|S_IXUGO,
 		.child		= raid_table,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table raid_root_table[] = {
 	{
-		.ctl_name	= CTL_DEV,
 		.procname	= "dev",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= raid_dir_table,
 	},
-	{ .ctl_name = 0 }
+	{  }
 };
 
 static const struct block_device_operations md_fops;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index a053423..e07ce2e 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1650,11 +1650,12 @@
 					       r1_bio->sector,
 					       r1_bio->sectors);
 				unfreeze_array(conf);
-			}
+			} else
+				md_error(mddev,
+					 conf->mirrors[r1_bio->read_disk].rdev);
 
 			bio = r1_bio->bios[r1_bio->read_disk];
-			if ((disk=read_balance(conf, r1_bio)) == -1 ||
-			    disk == r1_bio->read_disk) {
+			if ((disk=read_balance(conf, r1_bio)) == -1) {
 				printk(KERN_ALERT "raid1: %s: unrecoverable I/O"
 				       " read error for block %llu\n",
 				       bdevname(bio->bi_bdev,b),
diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c
index 655474b..abd4791 100644
--- a/drivers/media/common/ir-functions.c
+++ b/drivers/media/common/ir-functions.c
@@ -64,7 +64,7 @@
 
 	ir->ir_type = ir_type;
 
-	memset(ir->ir_codes, sizeof(ir->ir_codes), 0);
+	memset(ir->ir_codes, 0, sizeof(ir->ir_codes));
 
 	/*
 	 * FIXME: This is a temporary workaround to use the new IR tables
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index ddf639e..9808241 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -31,6 +31,7 @@
 #include <linux/wait.h>
 #include <linux/slab.h>
 #include <linux/poll.h>
+#include <linux/semaphore.h>
 #include <linux/module.h>
 #include <linux/list.h>
 #include <linux/freezer.h>
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index f65591fb7..2a53dd0 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -663,6 +663,14 @@
 	.parallel_ts = 1,
 };
 
+static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = {
+	.demod_address = 0x0f,
+	.if2 = 45600,
+	.no_tuner = 1,
+	.parallel_ts = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
 static struct mt352_config cxusb_mt352_xc3028_config = {
 	.demod_address = 0x0f,
 	.if2 = 4560,
@@ -894,7 +902,7 @@
 	cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1);
 
 	if ((adap->fe = dvb_attach(zl10353_attach,
-				   &cxusb_zl10353_xc3028_config,
+				   &cxusb_zl10353_xc3028_config_no_i2c_gate,
 				   &adap->dev->i2c_adap)) == NULL)
 		return -EIO;
 
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index 8c1aed7..85a222c 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -4,7 +4,7 @@
 
 config SMS_SIANO_MDTV
 	tristate "Siano SMS1xxx based MDTV receiver"
-	depends on DVB_CORE && INPUT
+	depends on DVB_CORE && INPUT && HAS_DMA
 	---help---
 	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index a87a477..b134553 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -195,6 +195,24 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called radio-maestro.
 
+config RADIO_MIROPCM20
+	tristate "miroSOUND PCM20 radio"
+	depends on ISA && VIDEO_V4L2
+	select SND_MIRO
+	---help---
+	  Choose Y here if you have this FM radio card. You also need to enable
+	  the ALSA sound system. This choice automatically selects the ALSA
+	  sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
+	  is required for the radio-miropcm20.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux API.  Information on
+	  this API and pointers to "v4l" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-miropcm20.
+
 config RADIO_SF16FMI
 	tristate "SF16FMI Radio"
 	depends on ISA && VIDEO_V4L2
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index 2a1be3b..8a63d54 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -18,6 +18,7 @@
 obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o
 obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o
 obj-$(CONFIG_RADIO_MAESTRO) += radio-maestro.o
+obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o
 obj-$(CONFIG_USB_DSBR) += dsbr100.o
 obj-$(CONFIG_RADIO_SI470X) += si470x/
 obj-$(CONFIG_USB_MR800) += radio-mr800.o
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index c3f579d..c6cf116 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -181,12 +181,10 @@
 
 static void gemtek_pci_unmute(struct gemtek_pci *card)
 {
-	mutex_lock(&card->lock);
 	if (card->mute) {
 		gemtek_pci_setfrequency(card, card->current_frequency);
 		card->mute = false;
 	}
-	mutex_unlock(&card->lock);
 }
 
 static int gemtek_pci_getsignal(struct gemtek_pci *card)
diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c
new file mode 100644
index 0000000..4ff8854
--- /dev/null
+++ b/drivers/media/radio/radio-miropcm20.c
@@ -0,0 +1,270 @@
+/* Miro PCM20 radio driver for Linux radio support
+ * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
+ * Thanks to Norberto Pellici for the ACI device interface specification
+ * The API part is based on the radiotrack driver by M. Kirkwood
+ * This driver relies on the aci mixer provided by the snd-miro
+ * ALSA driver.
+ * Look there for further info...
+ */
+
+/* What ever you think about the ACI, version 0x07 is not very well!
+ * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
+ * conditions...                Robert
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+#include <sound/aci.h>
+
+static int radio_nr = -1;
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
+
+static int mono;
+module_param(mono, bool, 0);
+MODULE_PARM_DESC(mono, "Force tuner into mono mode.");
+
+struct pcm20 {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	unsigned long freq;
+	int muted;
+	struct snd_miro_aci *aci;
+};
+
+static struct pcm20 pcm20_card = {
+	.freq   = 87*16000,
+	.muted  = 1,
+};
+
+static int pcm20_mute(struct pcm20 *dev, unsigned char mute)
+{
+	dev->muted = mute;
+	return snd_aci_cmd(dev->aci, ACI_SET_TUNERMUTE, mute, -1);
+}
+
+static int pcm20_stereo(struct pcm20 *dev, unsigned char stereo)
+{
+	return snd_aci_cmd(dev->aci, ACI_SET_TUNERMONO, !stereo, -1);
+}
+
+static int pcm20_setfreq(struct pcm20 *dev, unsigned long freq)
+{
+	unsigned char freql;
+	unsigned char freqh;
+	struct snd_miro_aci *aci = dev->aci;
+
+	dev->freq = freq;
+
+	freq /= 160;
+	if (!(aci->aci_version == 0x07 || aci->aci_version >= 0xb0))
+		freq /= 10;  /* I don't know exactly which version
+			      * needs this hack */
+	freql = freq & 0xff;
+	freqh = freq >> 8;
+
+	pcm20_stereo(dev, !mono);
+	return snd_aci_cmd(aci, ACI_WRITE_TUNE, freql, freqh);
+}
+
+static const struct v4l2_file_operations pcm20_fops = {
+	.owner		= THIS_MODULE,
+	.ioctl		= video_ioctl2,
+};
+
+static int vidioc_querycap(struct file *file, void *priv,
+				struct v4l2_capability *v)
+{
+	strlcpy(v->driver, "Miro PCM20", sizeof(v->driver));
+	strlcpy(v->card, "Miro PCM20", sizeof(v->card));
+	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
+	v->version = 0x1;
+	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	if (v->index)	/* Only 1 tuner */
+		return -EINVAL;
+	strlcpy(v->name, "FM", sizeof(v->name));
+	v->type = V4L2_TUNER_RADIO;
+	v->rangelow = 87*16000;
+	v->rangehigh = 108*16000;
+	v->signal = 0xffff;
+	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
+	v->capability = V4L2_TUNER_CAP_LOW;
+	v->audmode = V4L2_TUNER_MODE_MONO;
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *v)
+{
+	return v->index ? -EINVAL : 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	if (f->tuner != 0)
+		return -EINVAL;
+
+	f->type = V4L2_TUNER_RADIO;
+	f->frequency = dev->freq;
+	return 0;
+}
+
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *f)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	dev->freq = f->frequency;
+	pcm20_setfreq(dev, f->frequency);
+	return 0;
+}
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+				struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
+	}
+	return -EINVAL;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctrl)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		ctrl->value = dev->muted;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctrl)
+{
+	struct pcm20 *dev = video_drvdata(file);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		pcm20_mute(dev, ctrl->value);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
+{
+	return i ? -EINVAL : 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv,
+				struct v4l2_audio *a)
+{
+	a->index = 0;
+	strlcpy(a->name, "Radio", sizeof(a->name));
+	a->capability = V4L2_AUDCAP_STEREO;
+	return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *priv,
+				struct v4l2_audio *a)
+{
+	return a->index ? -EINVAL : 0;
+}
+
+static const struct v4l2_ioctl_ops pcm20_ioctl_ops = {
+	.vidioc_querycap    = vidioc_querycap,
+	.vidioc_g_tuner     = vidioc_g_tuner,
+	.vidioc_s_tuner     = vidioc_s_tuner,
+	.vidioc_g_frequency = vidioc_g_frequency,
+	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_queryctrl   = vidioc_queryctrl,
+	.vidioc_g_ctrl      = vidioc_g_ctrl,
+	.vidioc_s_ctrl      = vidioc_s_ctrl,
+	.vidioc_g_audio     = vidioc_g_audio,
+	.vidioc_s_audio     = vidioc_s_audio,
+	.vidioc_g_input     = vidioc_g_input,
+	.vidioc_s_input     = vidioc_s_input,
+};
+
+static int __init pcm20_init(void)
+{
+	struct pcm20 *dev = &pcm20_card;
+	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
+	int res;
+
+	dev->aci = snd_aci_get_aci();
+	if (dev->aci == NULL) {
+		v4l2_err(v4l2_dev,
+			 "you must load the snd-miro driver first!\n");
+		return -ENODEV;
+	}
+	strlcpy(v4l2_dev->name, "miropcm20", sizeof(v4l2_dev->name));
+
+
+	res = v4l2_device_register(NULL, v4l2_dev);
+	if (res < 0) {
+		v4l2_err(v4l2_dev, "could not register v4l2_device\n");
+		return -EINVAL;
+	}
+
+	strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
+	dev->vdev.v4l2_dev = v4l2_dev;
+	dev->vdev.fops = &pcm20_fops;
+	dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
+	dev->vdev.release = video_device_release_empty;
+	video_set_drvdata(&dev->vdev, dev);
+
+	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
+		goto fail;
+
+	v4l2_info(v4l2_dev, "Mirosound PCM20 Radio tuner\n");
+	return 0;
+fail:
+	v4l2_device_unregister(v4l2_dev);
+	return -EINVAL;
+}
+
+MODULE_AUTHOR("Ruurd Reitsma, Krzysztof Helt");
+MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
+MODULE_LICENSE("GPL");
+
+static void __exit pcm20_cleanup(void)
+{
+	struct pcm20 *dev = &pcm20_card;
+
+	video_unregister_device(&dev->vdev);
+	v4l2_device_unregister(&dev->v4l2_dev);
+}
+
+module_init(pcm20_init);
+module_exit(pcm20_cleanup);
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index c015da8..d14cfb2 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -1426,7 +1426,6 @@
 	struct vpif_display_config *config;
 	int i, j = 0, k, q, m, err = 0;
 	struct i2c_adapter *i2c_adap;
-	struct vpif_config *config;
 	struct common_obj *common;
 	struct channel_obj *ch;
 	struct video_device *vfd;
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index bdb249b..c0fd5c6 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -1584,8 +1584,8 @@
 	[EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
 		.name          = "Reddo DVB-C USB TV Box",
 		.tuner_type    = TUNER_ABSENT,
+		.tuner_gpio    = reddo_dvb_c_usb_box,
 		.has_dvb       = 1,
-		.dvb_gpio      = reddo_dvb_c_usb_box,
 	},
 };
 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 5f37952..7280229 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -28,6 +28,7 @@
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index dff2e5e..7db82bd 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/vmalloc.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 2f78b4f..9c8b7c7 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -31,6 +31,7 @@
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
 #include <linux/pm_runtime.h>
+#include <linux/sched.h>
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
@@ -1723,11 +1724,12 @@
 
 	err = soc_camera_host_register(&pcdev->ici);
 	if (err)
-		goto exit_free_irq;
+		goto exit_free_clk;
 
 	return 0;
 
-exit_free_irq:
+exit_free_clk:
+	pm_runtime_disable(&pdev->dev);
 	free_irq(pcdev->irq, pcdev);
 exit_release_mem:
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
@@ -1747,6 +1749,7 @@
 					struct sh_mobile_ceu_dev, ici);
 
 	soc_camera_host_unregister(soc_host);
+	pm_runtime_disable(&pdev->dev);
 	free_irq(pcdev->irq, pcdev);
 	if (platform_get_resource(pdev, IORESOURCE_MEM, 1))
 		dma_release_declared_memory(&pdev->dev);
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 36e617bd..95fdeb2 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -1097,6 +1097,13 @@
 	return v4l2_subdev_call(sd, video, s_crop, a);
 }
 
+static void soc_camera_device_init(struct device *dev, void *pdata)
+{
+	dev->platform_data	= pdata;
+	dev->bus		= &soc_camera_bus_type;
+	dev->release		= dummy_release;
+}
+
 int soc_camera_host_register(struct soc_camera_host *ici)
 {
 	struct soc_camera_host *ix;
@@ -1158,6 +1165,7 @@
 
 	list_for_each_entry(icd, &devices, list) {
 		if (icd->iface == ici->nr) {
+			void *pdata = icd->dev.platform_data;
 			/* The bus->remove will be called */
 			device_unregister(&icd->dev);
 			/*
@@ -1169,6 +1177,7 @@
 			 * device private data.
 			 */
 			memset(&icd->dev, 0, sizeof(icd->dev));
+			soc_camera_device_init(&icd->dev, pdata);
 		}
 	}
 
@@ -1200,10 +1209,7 @@
 		 * man, stay reasonable... */
 		return -ENOMEM;
 
-	icd->devnum = num;
-	icd->dev.bus = &soc_camera_bus_type;
-
-	icd->dev.release	= dummy_release;
+	icd->devnum		= num;
 	icd->use_count		= 0;
 	icd->host_priv		= NULL;
 	mutex_init(&icd->video_lock);
@@ -1311,12 +1317,13 @@
 	icd->iface = icl->bus_id;
 	icd->pdev = &pdev->dev;
 	platform_set_drvdata(pdev, icd);
-	icd->dev.platform_data = icl;
 
 	ret = soc_camera_device_register(icd);
 	if (ret < 0)
 		goto escdevreg;
 
+	soc_camera_device_init(&icd->dev, icl);
+
 	icd->user_width		= DEFAULT_WIDTH;
 	icd->user_height	= DEFAULT_HEIGHT;
 
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index 635ffc7..c3065c4 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/dma-mapping.h>
+#include <linux/sched.h>
 #include <media/videobuf-dma-contig.h>
 
 struct videobuf_dma_contig_memory {
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 570be13..08f2d07 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -121,6 +121,12 @@
 	  and load scripts controling which resources are switched off/on
 	  or reset when a sleep, wakeup or warm reset event occurs.
 
+config TWL4030_CODEC
+	bool
+	depends on TWL4030_CORE
+	select MFD_CORE
+	default n
+
 config MFD_TMIO
 	bool
 	default n
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f3b277b..af0fc90 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -26,6 +26,7 @@
 
 obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
+obj-$(CONFIG_TWL4030_CODEC)	+= twl4030-codec.o
 
 obj-$(CONFIG_MFD_MC13783)	+= mc13783-core.o
 
diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
index 57271cb..84815f9 100644
--- a/drivers/mfd/mcp-core.c
+++ b/drivers/mfd/mcp-core.c
@@ -17,11 +17,11 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/mfd/mcp.h>
 
 #include <mach/dma.h>
 #include <asm/system.h>
 
-#include "mcp.h"
 
 #define to_mcp(d)		container_of(d, struct mcp, attached_device)
 #define to_mcp_driver(d)	container_of(d, struct mcp_driver, drv)
diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
index 62b32da..2584272 100644
--- a/drivers/mfd/mcp-sa11x0.c
+++ b/drivers/mfd/mcp-sa11x0.c
@@ -19,6 +19,7 @@
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/mcp.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
@@ -28,7 +29,6 @@
 
 #include <mach/assabet.h>
 
-#include "mcp.h"
 
 struct mcp_sa11x0 {
 	u32	mccr0;
@@ -163,6 +163,7 @@
 	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
 	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
 	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
+	mcp->gpio_base		= data->gpio_base;
 
 	platform_set_drvdata(pdev, mcp);
 
diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h
deleted file mode 100644
index c093a93..0000000
--- a/drivers/mfd/mcp.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/drivers/mfd/mcp.h
- *
- *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef MCP_H
-#define MCP_H
-
-struct mcp_ops;
-
-struct mcp {
-	struct module	*owner;
-	struct mcp_ops	*ops;
-	spinlock_t	lock;
-	int		use_count;
-	unsigned int	sclk_rate;
-	unsigned int	rw_timeout;
-	dma_device_t	dma_audio_rd;
-	dma_device_t	dma_audio_wr;
-	dma_device_t	dma_telco_rd;
-	dma_device_t	dma_telco_wr;
-	struct device	attached_device;
-};
-
-struct mcp_ops {
-	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
-	void		(*set_audio_divisor)(struct mcp *, unsigned int);
-	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
-	unsigned int	(*reg_read)(struct mcp *, unsigned int);
-	void		(*enable)(struct mcp *);
-	void		(*disable)(struct mcp *);
-};
-
-void mcp_set_telecom_divisor(struct mcp *, unsigned int);
-void mcp_set_audio_divisor(struct mcp *, unsigned int);
-void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
-unsigned int mcp_reg_read(struct mcp *, unsigned int);
-void mcp_enable(struct mcp *);
-void mcp_disable(struct mcp *);
-#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
-
-struct mcp *mcp_host_alloc(struct device *, size_t);
-int mcp_host_register(struct mcp *);
-void mcp_host_unregister(struct mcp *);
-
-struct mcp_driver {
-	struct device_driver drv;
-	int (*probe)(struct mcp *);
-	void (*remove)(struct mcp *);
-	int (*suspend)(struct mcp *, pm_message_t);
-	int (*resume)(struct mcp *);
-};
-
-int mcp_driver_register(struct mcp_driver *);
-void mcp_driver_unregister(struct mcp_driver *);
-
-#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
-#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
-
-#define mcp_priv(mcp)		((void *)((mcp)+1))
-
-#endif
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 4b364ba..970afa1 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/gpio.h>
-#include <mach/menelaus.h>
+#include <plat/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
 
diff --git a/drivers/mfd/twl4030-codec.c b/drivers/mfd/twl4030-codec.c
new file mode 100644
index 0000000..77b9149
--- /dev/null
+++ b/drivers/mfd/twl4030-codec.c
@@ -0,0 +1,276 @@
+/*
+ * MFD driver for twl4030 codec submodule
+ *
+ * Author:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/twl4030-codec.h>
+
+#define TWL4030_CODEC_CELLS	2
+
+static struct platform_device *twl4030_codec_dev;
+
+struct twl4030_codec_resource {
+	int request_count;
+	u8 reg;
+	u8 mask;
+};
+
+struct twl4030_codec {
+	unsigned int audio_mclk;
+	struct mutex mutex;
+	struct twl4030_codec_resource resource[TWL4030_CODEC_RES_MAX];
+	struct mfd_cell cells[TWL4030_CODEC_CELLS];
+};
+
+/*
+ * Modify the resource, the function returns the content of the register
+ * after the modification.
+ */
+static int twl4030_codec_set_resource(enum twl4030_codec_res id, int enable)
+{
+	struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev);
+	u8 val;
+
+	twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val,
+			codec->resource[id].reg);
+
+	if (enable)
+		val |= codec->resource[id].mask;
+	else
+		val &= ~codec->resource[id].mask;
+
+	twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+					val, codec->resource[id].reg);
+
+	return val;
+}
+
+static inline int twl4030_codec_get_resource(enum twl4030_codec_res id)
+{
+	struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev);
+	u8 val;
+
+	twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &val,
+			codec->resource[id].reg);
+
+	return val;
+}
+
+/*
+ * Enable the resource.
+ * The function returns with error or the content of the register
+ */
+int twl4030_codec_enable_resource(enum twl4030_codec_res id)
+{
+	struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev);
+	int val;
+
+	if (id >= TWL4030_CODEC_RES_MAX) {
+		dev_err(&twl4030_codec_dev->dev,
+				"Invalid resource ID (%u)\n", id);
+		return -EINVAL;
+	}
+
+	mutex_lock(&codec->mutex);
+	if (!codec->resource[id].request_count)
+		/* Resource was disabled, enable it */
+		val = twl4030_codec_set_resource(id, 1);
+	else
+		val = twl4030_codec_get_resource(id);
+
+	codec->resource[id].request_count++;
+	mutex_unlock(&codec->mutex);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(twl4030_codec_enable_resource);
+
+/*
+ * Disable the resource.
+ * The function returns with error or the content of the register
+ */
+int twl4030_codec_disable_resource(unsigned id)
+{
+	struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev);
+	int val;
+
+	if (id >= TWL4030_CODEC_RES_MAX) {
+		dev_err(&twl4030_codec_dev->dev,
+				"Invalid resource ID (%u)\n", id);
+		return -EINVAL;
+	}
+
+	mutex_lock(&codec->mutex);
+	if (!codec->resource[id].request_count) {
+		dev_err(&twl4030_codec_dev->dev,
+			"Resource has been disabled already (%u)\n", id);
+		mutex_unlock(&codec->mutex);
+		return -EPERM;
+	}
+	codec->resource[id].request_count--;
+
+	if (!codec->resource[id].request_count)
+		/* Resource can be disabled now */
+		val = twl4030_codec_set_resource(id, 0);
+	else
+		val = twl4030_codec_get_resource(id);
+
+	mutex_unlock(&codec->mutex);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(twl4030_codec_disable_resource);
+
+unsigned int twl4030_codec_get_mclk(void)
+{
+	struct twl4030_codec *codec = platform_get_drvdata(twl4030_codec_dev);
+
+	return codec->audio_mclk;
+}
+EXPORT_SYMBOL_GPL(twl4030_codec_get_mclk);
+
+static int __devinit twl4030_codec_probe(struct platform_device *pdev)
+{
+	struct twl4030_codec *codec;
+	struct twl4030_codec_data *pdata = pdev->dev.platform_data;
+	struct mfd_cell *cell = NULL;
+	int ret, childs = 0;
+	u8 val;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Platform data is missing\n");
+		return -EINVAL;
+	}
+
+	/* Configure APLL_INFREQ and disable APLL if enabled */
+	val = 0;
+	switch (pdata->audio_mclk) {
+	case 19200000:
+		val |= TWL4030_APLL_INFREQ_19200KHZ;
+		break;
+	case 26000000:
+		val |= TWL4030_APLL_INFREQ_26000KHZ;
+		break;
+	case 38400000:
+		val |= TWL4030_APLL_INFREQ_38400KHZ;
+		break;
+	default:
+		dev_err(&pdev->dev, "Invalid audio_mclk\n");
+		return -EINVAL;
+	}
+	twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
+					val, TWL4030_REG_APLL_CTL);
+
+	codec = kzalloc(sizeof(struct twl4030_codec), GFP_KERNEL);
+	if (!codec)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, codec);
+
+	twl4030_codec_dev = pdev;
+	mutex_init(&codec->mutex);
+	codec->audio_mclk = pdata->audio_mclk;
+
+	/* Codec power */
+	codec->resource[TWL4030_CODEC_RES_POWER].reg = TWL4030_REG_CODEC_MODE;
+	codec->resource[TWL4030_CODEC_RES_POWER].mask = TWL4030_CODECPDZ;
+
+	/* PLL */
+	codec->resource[TWL4030_CODEC_RES_APLL].reg = TWL4030_REG_APLL_CTL;
+	codec->resource[TWL4030_CODEC_RES_APLL].mask = TWL4030_APLL_EN;
+
+	if (pdata->audio) {
+		cell = &codec->cells[childs];
+		cell->name = "twl4030_codec_audio";
+		cell->platform_data = pdata->audio;
+		cell->data_size = sizeof(*pdata->audio);
+		childs++;
+	}
+	if (pdata->vibra) {
+		cell = &codec->cells[childs];
+		cell->name = "twl4030_codec_vibra";
+		cell->platform_data = pdata->vibra;
+		cell->data_size = sizeof(*pdata->vibra);
+		childs++;
+	}
+
+	if (childs)
+		ret = mfd_add_devices(&pdev->dev, pdev->id, codec->cells,
+				      childs, NULL, 0);
+	else {
+		dev_err(&pdev->dev, "No platform data found for childs\n");
+		ret = -ENODEV;
+	}
+
+	if (!ret)
+		return 0;
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(codec);
+	twl4030_codec_dev = NULL;
+	return ret;
+}
+
+static int __devexit twl4030_codec_remove(struct platform_device *pdev)
+{
+	struct twl4030_codec *codec = platform_get_drvdata(pdev);
+
+	mfd_remove_devices(&pdev->dev);
+	platform_set_drvdata(pdev, NULL);
+	kfree(codec);
+	twl4030_codec_dev = NULL;
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:twl4030_codec");
+
+static struct platform_driver twl4030_codec_driver = {
+	.probe		= twl4030_codec_probe,
+	.remove		= __devexit_p(twl4030_codec_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "twl4030_codec",
+	},
+};
+
+static int __devinit twl4030_codec_init(void)
+{
+	return platform_driver_register(&twl4030_codec_driver);
+}
+module_init(twl4030_codec_init);
+
+static void __devexit twl4030_codec_exit(void)
+{
+	platform_driver_unregister(&twl4030_codec_driver);
+}
+module_exit(twl4030_codec_exit);
+
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@nokia.com>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index a1c47ee..40449cd 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -39,7 +39,7 @@
 #include <linux/i2c/twl4030.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #endif
 
 /*
@@ -114,6 +114,12 @@
 #define twl_has_watchdog()        false
 #endif
 
+#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
+#define twl_has_codec()	true
+#else
+#define twl_has_codec()	false
+#endif
+
 /* Triton Core internal information (BEGIN) */
 
 /* Last - for index max*/
@@ -601,6 +607,14 @@
 			return PTR_ERR(child);
 	}
 
+	if (twl_has_codec() && pdata->codec) {
+		child = add_child(1, "twl4030_codec",
+				pdata->codec, sizeof(*pdata->codec),
+				false, 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
 	if (twl_has_regulator()) {
 		/*
 		child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1);
@@ -763,7 +777,7 @@
 }
 
 /* NOTE:  this driver only handles a single twl4030/tps659x0 chip */
-static int
+static int __init
 twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	int				status;
diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
index 86fed48..cea9da6 100644
--- a/drivers/mfd/ucb1x00-assabet.c
+++ b/drivers/mfd/ucb1x00-assabet.c
@@ -14,10 +14,10 @@
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
 #include <linux/device.h>
+#include <linux/mfd/ucb1x00.h>
 
 #include <mach/dma.h>
 
-#include "ucb1x00.h"
 
 #define UCB1X00_ATTR(name,input)\
 static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index 60c3988..252b741 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -25,12 +25,12 @@
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/mfd/ucb1x00.h>
+#include <linux/gpio.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>
 
-#include "ucb1x00.h"
-
 static DEFINE_MUTEX(ucb1x00_mutex);
 static LIST_HEAD(ucb1x00_drivers);
 static LIST_HEAD(ucb1x00_devices);
@@ -108,6 +108,60 @@
 	return ucb1x00_reg_read(ucb, UCB_IO_DATA);
 }
 
+static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucb->io_lock, flags);
+	if (value)
+		ucb->io_out |= 1 << offset;
+	else
+		ucb->io_out &= ~(1 << offset);
+
+	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
+}
+
+static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucb->io_lock, flags);
+	ucb->io_dir &= ~(1 << offset);
+	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+	spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+	return 0;
+}
+
+static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
+		, int value)
+{
+	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ucb->io_lock, flags);
+	ucb->io_dir |= (1 << offset);
+	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+	if (value)
+		ucb->io_out |= 1 << offset;
+	else
+		ucb->io_out &= ~(1 << offset);
+	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+	spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+	return 0;
+}
+
 /*
  * UCB1300 data sheet says we must:
  *  1. enable ADC	=> 5us (including reference startup time)
@@ -476,6 +530,7 @@
 	struct ucb1x00_driver *drv;
 	unsigned int id;
 	int ret = -ENODEV;
+	int temp;
 
 	mcp_enable(mcp);
 	id = mcp_reg_read(mcp, UCB_ID);
@@ -508,12 +563,27 @@
 		goto err_free;
 	}
 
+	ucb->gpio.base = -1;
+	if (mcp->gpio_base != 0) {
+		ucb->gpio.label = dev_name(&ucb->dev);
+		ucb->gpio.base = mcp->gpio_base;
+		ucb->gpio.ngpio = 10;
+		ucb->gpio.set = ucb1x00_gpio_set;
+		ucb->gpio.get = ucb1x00_gpio_get;
+		ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
+		ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+		ret = gpiochip_add(&ucb->gpio);
+		if (ret)
+			goto err_free;
+	} else
+		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
+
 	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
 			  "UCB1x00", ucb);
 	if (ret) {
 		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
 			ucb->irq, ret);
-		goto err_free;
+		goto err_gpio;
 	}
 
 	mcp_set_drvdata(mcp, ucb);
@@ -522,6 +592,7 @@
 	if (ret)
 		goto err_irq;
 
+
 	INIT_LIST_HEAD(&ucb->devs);
 	mutex_lock(&ucb1x00_mutex);
 	list_add(&ucb->node, &ucb1x00_devices);
@@ -529,10 +600,14 @@
 		ucb1x00_add_dev(ucb, drv);
 	}
 	mutex_unlock(&ucb1x00_mutex);
+
 	goto out;
 
  err_irq:
 	free_irq(ucb->irq, ucb);
+ err_gpio:
+	if (ucb->gpio.base != -1)
+		temp = gpiochip_remove(&ucb->gpio);
  err_free:
 	kfree(ucb);
  err_disable:
@@ -545,6 +620,7 @@
 {
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct list_head *l, *n;
+	int ret;
 
 	mutex_lock(&ucb1x00_mutex);
 	list_del(&ucb->node);
@@ -554,6 +630,12 @@
 	}
 	mutex_unlock(&ucb1x00_mutex);
 
+	if (ucb->gpio.base != -1) {
+		ret = gpiochip_remove(&ucb->gpio);
+		if (ret)
+			dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
+	}
+
 	free_irq(ucb->irq, ucb);
 	device_unregister(&ucb->dev);
 }
@@ -604,6 +686,7 @@
 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
 	struct ucb1x00_dev *dev;
 
+	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
 	mutex_lock(&ucb1x00_mutex);
 	list_for_each_entry(dev, &ucb->devs, dev_node) {
 		if (dev->drv->resume)
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
index 61b7d3e..000cb41 100644
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -30,12 +30,12 @@
 #include <linux/freezer.h>
 #include <linux/slab.h>
 #include <linux/kthread.h>
+#include <linux/mfd/ucb1x00.h>
 
 #include <mach/dma.h>
 #include <mach/collie.h>
 #include <asm/mach-types.h>
 
-#include "ucb1x00.h"
 
 
 struct ucb1x00_ts {
diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h
deleted file mode 100644
index a8ad8a0..0000000
--- a/drivers/mfd/ucb1x00.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- *  linux/drivers/mfd/ucb1x00.h
- *
- *  Copyright (C) 2001 Russell King, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
- */
-#ifndef UCB1200_H
-#define UCB1200_H
-
-#define UCB_IO_DATA	0x00
-#define UCB_IO_DIR	0x01
-
-#define UCB_IO_0		(1 << 0)
-#define UCB_IO_1		(1 << 1)
-#define UCB_IO_2		(1 << 2)
-#define UCB_IO_3		(1 << 3)
-#define UCB_IO_4		(1 << 4)
-#define UCB_IO_5		(1 << 5)
-#define UCB_IO_6		(1 << 6)
-#define UCB_IO_7		(1 << 7)
-#define UCB_IO_8		(1 << 8)
-#define UCB_IO_9		(1 << 9)
-
-#define UCB_IE_RIS	0x02
-#define UCB_IE_FAL	0x03
-#define UCB_IE_STATUS	0x04
-#define UCB_IE_CLEAR	0x04
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-#define UCB_IE_TSMX		(1 << 13)
-#define UCB_IE_TCLIP		(1 << 14)
-#define UCB_IE_ACLIP		(1 << 15)
-
-#define UCB_IRQ_TSPX		12
-
-#define UCB_TC_A	0x05
-#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
-#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
-
-#define UCB_TC_B	0x06
-#define UCB_TC_B_VOICE_ENA	(1 << 3)
-#define UCB_TC_B_CLIP		(1 << 4)
-#define UCB_TC_B_ATT		(1 << 6)
-#define UCB_TC_B_SIDE_ENA	(1 << 11)
-#define UCB_TC_B_MUTE		(1 << 13)
-#define UCB_TC_B_IN_ENA		(1 << 14)
-#define UCB_TC_B_OUT_ENA	(1 << 15)
-
-#define UCB_AC_A	0x07
-#define UCB_AC_B	0x08
-#define UCB_AC_B_LOOP		(1 << 8)
-#define UCB_AC_B_MUTE		(1 << 13)
-#define UCB_AC_B_IN_ENA		(1 << 14)
-#define UCB_AC_B_OUT_ENA	(1 << 15)
-
-#define UCB_TS_CR	0x09
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR	0x0a
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA	0x0b
-#define UCB_ADC_DAT_VAL		(1 << 15)
-#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
-
-#define UCB_ID		0x0c
-#define UCB_ID_1200		0x1004
-#define UCB_ID_1300		0x1005
-#define UCB_ID_TC35143          0x9712
-
-#define UCB_MODE	0x0d
-#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
-#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
-
-#include "mcp.h"
-
-struct ucb1x00_irq {
-	void *devid;
-	void (*fn)(int, void *);
-};
-
-struct ucb1x00 {
-	spinlock_t		lock;
-	struct mcp		*mcp;
-	unsigned int		irq;
-	struct semaphore	adc_sem;
-	spinlock_t		io_lock;
-	u16			id;
-	u16			io_dir;
-	u16			io_out;
-	u16			adc_cr;
-	u16			irq_fal_enbl;
-	u16			irq_ris_enbl;
-	struct ucb1x00_irq	irq_handler[16];
-	struct device		dev;
-	struct list_head	node;
-	struct list_head	devs;
-};
-
-struct ucb1x00_driver;
-
-struct ucb1x00_dev {
-	struct list_head	dev_node;
-	struct list_head	drv_node;
-	struct ucb1x00		*ucb;
-	struct ucb1x00_driver	*drv;
-	void			*priv;
-};
-
-struct ucb1x00_driver {
-	struct list_head	node;
-	struct list_head	devs;
-	int	(*add)(struct ucb1x00_dev *dev);
-	void	(*remove)(struct ucb1x00_dev *dev);
-	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
-	int	(*resume)(struct ucb1x00_dev *dev);
-};
-
-#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
-
-int ucb1x00_register_driver(struct ucb1x00_driver *);
-void ucb1x00_unregister_driver(struct ucb1x00_driver *);
-
-/**
- *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Return the SIB clock rate in Hz.
- */
-static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
-{
-	return mcp_get_sclk_rate(ucb->mcp);
-}
-
-/**
- *	ucb1x00_enable - enable the UCB1x00 SIB clock
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Enable the SIB clock.  This can be called multiple times.
- */
-static inline void ucb1x00_enable(struct ucb1x00 *ucb)
-{
-	mcp_enable(ucb->mcp);
-}
-
-/**
- *	ucb1x00_disable - disable the UCB1x00 SIB clock
- *	@ucb: UCB1x00 structure describing chip
- *
- *	Disable the SIB clock.  The SIB clock will only be disabled
- *	when the number of ucb1x00_enable calls match the number of
- *	ucb1x00_disable calls.
- */
-static inline void ucb1x00_disable(struct ucb1x00 *ucb)
-{
-	mcp_disable(ucb->mcp);
-}
-
-/**
- *	ucb1x00_reg_write - write a UCB1x00 register
- *	@ucb: UCB1x00 structure describing chip
- *	@reg: UCB1x00 4-bit register index to write
- *	@val: UCB1x00 16-bit value to write
- *
- *	Write the UCB1x00 register @reg with value @val.  The SIB
- *	clock must be running for this function to return.
- */
-static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
-{
-	mcp_reg_write(ucb->mcp, reg, val);
-}
-
-/**
- *	ucb1x00_reg_read - read a UCB1x00 register
- *	@ucb: UCB1x00 structure describing chip
- *	@reg: UCB1x00 4-bit register index to write
- *
- *	Read the UCB1x00 register @reg and return its value.  The SIB
- *	clock must be running for this function to return.
- */
-static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
-{
-	return mcp_reg_read(ucb->mcp, reg);
-}
-/**
- *	ucb1x00_set_audio_divisor - 
- *	@ucb: UCB1x00 structure describing chip
- *	@div: SIB clock divisor
- */
-static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
-	mcp_set_audio_divisor(ucb->mcp, div);
-}
-
-/**
- *	ucb1x00_set_telecom_divisor -
- *	@ucb: UCB1x00 structure describing chip
- *	@div: SIB clock divisor
- */
-static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
-{
-	mcp_set_telecom_divisor(ucb->mcp, div);
-}
-
-void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
-void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
-unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
-
-#define UCB_NOSYNC	(0)
-#define UCB_SYNC	(1)
-
-unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
-void ucb1x00_adc_enable(struct ucb1x00 *ucb);
-void ucb1x00_adc_disable(struct ucb1x00 *ucb);
-
-/*
- * Which edges of the IRQ do you want to control today?
- */
-#define UCB_RISING	(1 << 0)
-#define UCB_FALLING	(1 << 1)
-
-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
-
-#endif
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 49b7885..7f27576 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -29,7 +29,7 @@
 /* Current settings - values are 2*2^(reg_val/4) microamps.  These are
  * exported since they are used by multiple drivers.
  */
-int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = {
+int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = {
 	2,
 	2,
 	3,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index df1f86b..2c16ca6 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -246,8 +246,19 @@
 	  To compile this driver as a module, choose M here: the module will
 	  be called ep93xx_pwm.
 
+config DS1682
+	tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Dallas Semiconductor
+	  DS1682 Total Elapsed Time Recorder.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called ds1682.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
+source "drivers/misc/iwmc3200top/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f982d2e..906a0ed 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -20,6 +20,8 @@
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
+obj-$(CONFIG_DS1682)		+= ds1682.o
 obj-$(CONFIG_C2PORT)		+= c2port/
+obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-y				+= eeprom/
 obj-y				+= cb710/
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/misc/ds1682.c
similarity index 100%
rename from drivers/i2c/chips/ds1682.c
rename to drivers/misc/ds1682.c
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index db39f4a..2cb2736 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -158,6 +158,7 @@
 	struct i2c_msg msg[2];
 	u8 msgbuf[2];
 	struct i2c_client *client;
+	unsigned long timeout, read_time;
 	int status, i;
 
 	memset(msg, 0, sizeof(msg));
@@ -183,47 +184,60 @@
 	if (count > io_limit)
 		count = io_limit;
 
-	/* Smaller eeproms can work given some SMBus extension calls */
 	if (at24->use_smbus) {
+		/* Smaller eeproms can work given some SMBus extension calls */
 		if (count > I2C_SMBUS_BLOCK_MAX)
 			count = I2C_SMBUS_BLOCK_MAX;
-		status = i2c_smbus_read_i2c_block_data(client, offset,
-				count, buf);
-		dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n",
-				count, offset, status);
-		return (status < 0) ? -EIO : status;
+	} else {
+		/*
+		 * When we have a better choice than SMBus calls, use a
+		 * combined I2C message. Write address; then read up to
+		 * io_limit data bytes. Note that read page rollover helps us
+		 * here (unlike writes). msgbuf is u8 and will cast to our
+		 * needs.
+		 */
+		i = 0;
+		if (at24->chip.flags & AT24_FLAG_ADDR16)
+			msgbuf[i++] = offset >> 8;
+		msgbuf[i++] = offset;
+
+		msg[0].addr = client->addr;
+		msg[0].buf = msgbuf;
+		msg[0].len = i;
+
+		msg[1].addr = client->addr;
+		msg[1].flags = I2C_M_RD;
+		msg[1].buf = buf;
+		msg[1].len = count;
 	}
 
 	/*
-	 * When we have a better choice than SMBus calls, use a combined
-	 * I2C message. Write address; then read up to io_limit data bytes.
-	 * Note that read page rollover helps us here (unlike writes).
-	 * msgbuf is u8 and will cast to our needs.
+	 * Reads fail if the previous write didn't complete yet. We may
+	 * loop a few times until this one succeeds, waiting at least
+	 * long enough for one entire page write to work.
 	 */
-	i = 0;
-	if (at24->chip.flags & AT24_FLAG_ADDR16)
-		msgbuf[i++] = offset >> 8;
-	msgbuf[i++] = offset;
+	timeout = jiffies + msecs_to_jiffies(write_timeout);
+	do {
+		read_time = jiffies;
+		if (at24->use_smbus) {
+			status = i2c_smbus_read_i2c_block_data(client, offset,
+					count, buf);
+		} else {
+			status = i2c_transfer(client->adapter, msg, 2);
+			if (status == 2)
+				status = count;
+		}
+		dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
+				count, offset, status, jiffies);
 
-	msg[0].addr = client->addr;
-	msg[0].buf = msgbuf;
-	msg[0].len = i;
+		if (status == count)
+			return count;
 
-	msg[1].addr = client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].buf = buf;
-	msg[1].len = count;
+		/* REVISIT: at HZ=100, this is sloooow */
+		msleep(1);
+	} while (time_before(read_time, timeout));
 
-	status = i2c_transfer(client->adapter, msg, 2);
-	dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n",
-			count, offset, status);
-
-	if (status == 2)
-		return count;
-	else if (status >= 0)
-		return -EIO;
-	else
-		return status;
+	return -ETIMEDOUT;
 }
 
 static ssize_t at24_read(struct at24_data *at24,
diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c
index 6e43ab4..4bb7a3a 100644
--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -417,32 +417,25 @@
 			  struct i2c_board_info *info)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	int vendor, device, revision;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 		return -ENODEV;
 
-	if (kind <= 0) {
-		int vendor, device, revision;
+	vendor = i2c_smbus_read_word_data(client, ICS932S401_REG_VENDOR_REV);
+	vendor >>= 8;
+	revision = vendor >> ICS932S401_REV_SHIFT;
+	vendor &= ICS932S401_VENDOR_MASK;
+	if (vendor != ICS932S401_VENDOR)
+		return -ENODEV;
 
-		vendor = i2c_smbus_read_word_data(client,
-						  ICS932S401_REG_VENDOR_REV);
-		vendor >>= 8;
-		revision = vendor >> ICS932S401_REV_SHIFT;
-		vendor &= ICS932S401_VENDOR_MASK;
-		if (vendor != ICS932S401_VENDOR)
-			return -ENODEV;
+	device = i2c_smbus_read_word_data(client, ICS932S401_REG_DEVICE);
+	device >>= 8;
+	if (device != ICS932S401_DEVICE)
+		return -ENODEV;
 
-		device = i2c_smbus_read_word_data(client,
-						  ICS932S401_REG_DEVICE);
-		device >>= 8;
-		if (device != ICS932S401_DEVICE)
-			return -ENODEV;
-
-		if (revision != ICS932S401_REV)
-			dev_info(&adapter->dev, "Unknown revision %d\n",
-				 revision);
-	} else
-		dev_dbg(&adapter->dev, "detection forced\n");
+	if (revision != ICS932S401_REV)
+		dev_info(&adapter->dev, "Unknown revision %d\n", revision);
 
 	strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);
 
diff --git a/drivers/misc/iwmc3200top/Kconfig b/drivers/misc/iwmc3200top/Kconfig
new file mode 100644
index 0000000..9e4b88f
--- /dev/null
+++ b/drivers/misc/iwmc3200top/Kconfig
@@ -0,0 +1,20 @@
+config IWMC3200TOP
+        tristate "Intel Wireless MultiCom Top Driver"
+        depends on MMC && EXPERIMENTAL
+        select FW_LOADER
+	---help---
+	  Intel Wireless MultiCom 3200 Top driver is responsible for
+	  for firmware load and enabled coms enumeration
+
+config IWMC3200TOP_DEBUG
+	bool "Enable full debug output of iwmc3200top Driver"
+	depends on IWMC3200TOP
+	---help---
+	  Enable full debug output of iwmc3200top Driver
+
+config IWMC3200TOP_DEBUGFS
+	bool "Enable Debugfs debugging interface for iwmc3200top"
+	depends on IWMC3200TOP
+	---help---
+	  Enable creation of debugfs files for iwmc3200top
+
diff --git a/drivers/misc/iwmc3200top/Makefile b/drivers/misc/iwmc3200top/Makefile
new file mode 100644
index 0000000..fbf53fb
--- /dev/null
+++ b/drivers/misc/iwmc3200top/Makefile
@@ -0,0 +1,29 @@
+# iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+# drivers/misc/iwmc3200top/Makefile
+#
+# Copyright (C) 2009 Intel Corporation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version
+# 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+#
+# Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+#  -
+#
+#
+
+obj-$(CONFIG_IWMC3200TOP)	+= iwmc3200top.o
+iwmc3200top-objs	:= main.o fw-download.o
+iwmc3200top-$(CONFIG_IWMC3200TOP_DEBUG) += log.o
+iwmc3200top-$(CONFIG_IWMC3200TOP_DEBUGFS) += debugfs.o
diff --git a/drivers/misc/iwmc3200top/debugfs.c b/drivers/misc/iwmc3200top/debugfs.c
new file mode 100644
index 0000000..0c8ea0a1
--- /dev/null
+++ b/drivers/misc/iwmc3200top/debugfs.c
@@ -0,0 +1,133 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/debufs.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/debugfs.h>
+
+#include "iwmc3200top.h"
+#include "fw-msg.h"
+#include "log.h"
+#include "debugfs.h"
+
+
+
+/*      Constants definition        */
+#define HEXADECIMAL_RADIX	16
+
+/*      Functions definition        */
+
+
+#define DEBUGFS_ADD(name, parent) do {					\
+	dbgfs->dbgfs_##parent##_files.file_##name =			\
+	debugfs_create_file(#name, 0644, dbgfs->dir_##parent, priv,	\
+				&iwmct_dbgfs_##name##_ops);		\
+} while (0)
+
+#define DEBUGFS_RM(name)  do {		\
+	debugfs_remove(name);		\
+	name = NULL;			\
+} while (0)
+
+#define DEBUGFS_READ_FUNC(name)						\
+ssize_t iwmct_dbgfs_##name##_read(struct file *file,			\
+				  char __user *user_buf,		\
+				  size_t count, loff_t *ppos);
+
+#define DEBUGFS_WRITE_FUNC(name)					\
+ssize_t iwmct_dbgfs_##name##_write(struct file *file,			\
+				   const char __user *user_buf,		\
+				   size_t count, loff_t *ppos);
+
+#define DEBUGFS_READ_FILE_OPS(name)					\
+	DEBUGFS_READ_FUNC(name)						\
+	static const struct file_operations iwmct_dbgfs_##name##_ops = {  \
+		.read = iwmct_dbgfs_##name##_read,			\
+		.open = iwmct_dbgfs_open_file_generic,			\
+	};
+
+#define DEBUGFS_WRITE_FILE_OPS(name)					\
+	DEBUGFS_WRITE_FUNC(name)					\
+	static const struct file_operations iwmct_dbgfs_##name##_ops = {  \
+		.write = iwmct_dbgfs_##name##_write,			\
+		.open = iwmct_dbgfs_open_file_generic,			\
+	};
+
+#define DEBUGFS_READ_WRITE_FILE_OPS(name)				\
+	DEBUGFS_READ_FUNC(name)						\
+	DEBUGFS_WRITE_FUNC(name)					\
+	static const struct file_operations iwmct_dbgfs_##name##_ops = {\
+		.write = iwmct_dbgfs_##name##_write,			\
+		.read = iwmct_dbgfs_##name##_read,			\
+		.open = iwmct_dbgfs_open_file_generic,			\
+	};
+
+
+/*      Debugfs file ops definitions        */
+
+/*
+ * Create the debugfs files and directories
+ *
+ */
+void iwmct_dbgfs_register(struct iwmct_priv *priv, const char *name)
+{
+	struct iwmct_debugfs *dbgfs;
+
+	dbgfs = kzalloc(sizeof(struct iwmct_debugfs), GFP_KERNEL);
+	if (!dbgfs) {
+		LOG_ERROR(priv, DEBUGFS, "failed to allocate %zd bytes\n",
+					sizeof(struct iwmct_debugfs));
+		return;
+	}
+
+	priv->dbgfs = dbgfs;
+	dbgfs->name = name;
+	dbgfs->dir_drv = debugfs_create_dir(name, NULL);
+	if (!dbgfs->dir_drv) {
+		LOG_ERROR(priv, DEBUGFS, "failed to create debugfs dir\n");
+		return;
+	}
+
+	return;
+}
+
+/**
+ * Remove the debugfs files and directories
+ *
+ */
+void iwmct_dbgfs_unregister(struct iwmct_debugfs *dbgfs)
+{
+	if (!dbgfs)
+		return;
+
+	DEBUGFS_RM(dbgfs->dir_drv);
+	kfree(dbgfs);
+	dbgfs = NULL;
+}
+
diff --git a/drivers/misc/iwmc3200top/debugfs.h b/drivers/misc/iwmc3200top/debugfs.h
new file mode 100644
index 0000000..71d4575
--- /dev/null
+++ b/drivers/misc/iwmc3200top/debugfs.h
@@ -0,0 +1,58 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/debufs.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __DEBUGFS_H__
+#define __DEBUGFS_H__
+
+
+#ifdef CONFIG_IWMC3200TOP_DEBUGFS
+
+struct iwmct_debugfs {
+	const char *name;
+	struct dentry *dir_drv;
+	struct dir_drv_files {
+	} dbgfs_drv_files;
+};
+
+void iwmct_dbgfs_register(struct iwmct_priv *priv, const char *name);
+void iwmct_dbgfs_unregister(struct iwmct_debugfs *dbgfs);
+
+#else /* CONFIG_IWMC3200TOP_DEBUGFS */
+
+struct iwmct_debugfs;
+
+static inline void
+iwmct_dbgfs_register(struct iwmct_priv *priv, const char *name)
+{}
+
+static inline void
+iwmct_dbgfs_unregister(struct iwmct_debugfs *dbgfs)
+{}
+
+#endif /* CONFIG_IWMC3200TOP_DEBUGFS */
+
+#endif /* __DEBUGFS_H__ */
+
diff --git a/drivers/misc/iwmc3200top/fw-download.c b/drivers/misc/iwmc3200top/fw-download.c
new file mode 100644
index 0000000..50d431e4
--- /dev/null
+++ b/drivers/misc/iwmc3200top/fw-download.c
@@ -0,0 +1,355 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/fw-download.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/firmware.h>
+#include <linux/mmc/sdio_func.h>
+#include <asm/unaligned.h>
+
+#include "iwmc3200top.h"
+#include "log.h"
+#include "fw-msg.h"
+
+#define CHECKSUM_BYTES_NUM sizeof(u32)
+
+/**
+  init parser struct with file
+ */
+static int iwmct_fw_parser_init(struct iwmct_priv *priv, const u8 *file,
+			      size_t file_size, size_t block_size)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_fw_hdr *fw_hdr = &parser->versions;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+
+	LOG_INFO(priv, FW_DOWNLOAD, "file_size=%zd\n", file_size);
+
+	parser->file = file;
+	parser->file_size = file_size;
+	parser->cur_pos = 0;
+	parser->buf = NULL;
+
+	parser->buf = kzalloc(block_size, GFP_KERNEL);
+	if (!parser->buf) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "kzalloc error\n");
+		return -ENOMEM;
+	}
+	parser->buf_size = block_size;
+
+	/* extract fw versions */
+	memcpy(fw_hdr, parser->file, sizeof(struct iwmct_fw_hdr));
+	LOG_INFO(priv, FW_DOWNLOAD, "fw versions are:\n"
+		"top %u.%u.%u gps %u.%u.%u bt %u.%u.%u tic %s\n",
+		fw_hdr->top_major, fw_hdr->top_minor, fw_hdr->top_revision,
+		fw_hdr->gps_major, fw_hdr->gps_minor, fw_hdr->gps_revision,
+		fw_hdr->bt_major, fw_hdr->bt_minor, fw_hdr->bt_revision,
+		fw_hdr->tic_name);
+
+	parser->cur_pos += sizeof(struct iwmct_fw_hdr);
+
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return 0;
+}
+
+static bool iwmct_checksum(struct iwmct_priv *priv)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	__le32 *file = (__le32 *)parser->file;
+	int i, pad, steps;
+	u32 accum = 0;
+	u32 checksum;
+	u32 mask = 0xffffffff;
+
+	pad = (parser->file_size - CHECKSUM_BYTES_NUM) % 4;
+	steps =  (parser->file_size - CHECKSUM_BYTES_NUM) / 4;
+
+	LOG_INFO(priv, FW_DOWNLOAD, "pad=%d steps=%d\n", pad, steps);
+
+	for (i = 0; i < steps; i++)
+		accum += le32_to_cpu(file[i]);
+
+	if (pad) {
+		mask <<= 8 * (4 - pad);
+		accum += le32_to_cpu(file[steps]) & mask;
+	}
+
+	checksum = get_unaligned_le32((__le32 *)(parser->file +
+			parser->file_size - CHECKSUM_BYTES_NUM));
+
+	LOG_INFO(priv, FW_DOWNLOAD,
+		"compare checksum accum=0x%x to checksum=0x%x\n",
+		accum, checksum);
+
+	return checksum == accum;
+}
+
+static int iwmct_parse_next_section(struct iwmct_priv *priv, const u8 **p_sec,
+				  size_t *sec_size, __le32 *sec_addr)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_dbg *dbg = &priv->dbg;
+	struct iwmct_fw_sec_hdr *sec_hdr;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+
+	while (parser->cur_pos + sizeof(struct iwmct_fw_sec_hdr)
+		<= parser->file_size) {
+
+		sec_hdr = (struct iwmct_fw_sec_hdr *)
+				(parser->file + parser->cur_pos);
+		parser->cur_pos += sizeof(struct iwmct_fw_sec_hdr);
+
+		LOG_INFO(priv, FW_DOWNLOAD,
+			"sec hdr: type=%s addr=0x%x size=%d\n",
+			sec_hdr->type, sec_hdr->target_addr,
+			sec_hdr->data_size);
+
+		if (strcmp(sec_hdr->type, "ENT") == 0)
+			parser->entry_point = le32_to_cpu(sec_hdr->target_addr);
+		else if (strcmp(sec_hdr->type, "LBL") == 0)
+			strcpy(dbg->label_fw, parser->file + parser->cur_pos);
+		else if (((strcmp(sec_hdr->type, "TOP") == 0) &&
+			  (priv->barker & BARKER_DNLOAD_TOP_MSK)) ||
+			 ((strcmp(sec_hdr->type, "GPS") == 0) &&
+			  (priv->barker & BARKER_DNLOAD_GPS_MSK)) ||
+			 ((strcmp(sec_hdr->type, "BTH") == 0) &&
+			  (priv->barker & BARKER_DNLOAD_BT_MSK))) {
+			*sec_addr = sec_hdr->target_addr;
+			*sec_size = le32_to_cpu(sec_hdr->data_size);
+			*p_sec = parser->file + parser->cur_pos;
+			parser->cur_pos += le32_to_cpu(sec_hdr->data_size);
+			return 1;
+		} else if (strcmp(sec_hdr->type, "LOG") != 0)
+			LOG_WARNING(priv, FW_DOWNLOAD,
+				    "skipping section type %s\n",
+				    sec_hdr->type);
+
+		parser->cur_pos += le32_to_cpu(sec_hdr->data_size);
+		LOG_INFO(priv, FW_DOWNLOAD,
+			"finished with section cur_pos=%zd\n", parser->cur_pos);
+	}
+
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return 0;
+}
+
+static int iwmct_download_section(struct iwmct_priv *priv, const u8 *p_sec,
+				size_t sec_size, __le32 addr)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_fw_load_hdr *hdr = (struct iwmct_fw_load_hdr *)parser->buf;
+	const u8 *cur_block = p_sec;
+	size_t sent = 0;
+	int cnt = 0;
+	int ret = 0;
+	u32 cmd = 0;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+	LOG_INFO(priv, FW_DOWNLOAD, "Download address 0x%x size 0x%zx\n",
+				addr, sec_size);
+
+	while (sent < sec_size) {
+		int i;
+		u32 chksm = 0;
+		u32 reset = atomic_read(&priv->reset);
+		/* actual FW data */
+		u32 data_size = min(parser->buf_size - sizeof(*hdr),
+				    sec_size - sent);
+		/* Pad to block size */
+		u32 trans_size = (data_size + sizeof(*hdr) +
+				  IWMC_SDIO_BLK_SIZE - 1) &
+				  ~(IWMC_SDIO_BLK_SIZE - 1);
+		++cnt;
+
+		/* in case of reset, interrupt FW DOWNLAOD */
+		if (reset) {
+			LOG_INFO(priv, FW_DOWNLOAD,
+				 "Reset detected. Abort FW download!!!");
+			ret = -ECANCELED;
+			goto exit;
+		}
+
+		memset(parser->buf, 0, parser->buf_size);
+		cmd |= IWMC_OPCODE_WRITE << CMD_HDR_OPCODE_POS;
+		cmd |= IWMC_CMD_SIGNATURE << CMD_HDR_SIGNATURE_POS;
+		cmd |= (priv->dbg.direct ? 1 : 0) << CMD_HDR_DIRECT_ACCESS_POS;
+		cmd |= (priv->dbg.checksum ? 1 : 0) << CMD_HDR_USE_CHECKSUM_POS;
+		hdr->data_size = cpu_to_le32(data_size);
+		hdr->target_addr = addr;
+
+		/* checksum is allowed for sizes divisible by 4 */
+		if (data_size & 0x3)
+			cmd &= ~CMD_HDR_USE_CHECKSUM_MSK;
+
+		memcpy(hdr->data, cur_block, data_size);
+
+
+		if (cmd & CMD_HDR_USE_CHECKSUM_MSK) {
+
+			chksm = data_size + le32_to_cpu(addr) + cmd;
+			for (i = 0; i < data_size >> 2; i++)
+				chksm += ((u32 *)cur_block)[i];
+
+			hdr->block_chksm = cpu_to_le32(chksm);
+			LOG_INFO(priv, FW_DOWNLOAD, "Checksum = 0x%X\n",
+				 hdr->block_chksm);
+		}
+
+		LOG_INFO(priv, FW_DOWNLOAD, "trans#%d, len=%d, sent=%zd, "
+				"sec_size=%zd, startAddress 0x%X\n",
+				cnt, trans_size, sent, sec_size, addr);
+
+		if (priv->dbg.dump)
+			LOG_HEXDUMP(FW_DOWNLOAD, parser->buf, trans_size);
+
+
+		hdr->cmd = cpu_to_le32(cmd);
+		/* send it down */
+		/* TODO: add more proper sending and error checking */
+		ret = iwmct_tx(priv, 0, parser->buf, trans_size);
+		if (ret != 0) {
+			LOG_INFO(priv, FW_DOWNLOAD,
+				"iwmct_tx returned %d\n", ret);
+			goto exit;
+		}
+
+		addr = cpu_to_le32(le32_to_cpu(addr) + data_size);
+		sent += data_size;
+		cur_block = p_sec + sent;
+
+		if (priv->dbg.blocks && (cnt + 1) >= priv->dbg.blocks) {
+			LOG_INFO(priv, FW_DOWNLOAD,
+				"Block number limit is reached [%d]\n",
+				priv->dbg.blocks);
+			break;
+		}
+	}
+
+	if (sent < sec_size)
+		ret = -EINVAL;
+exit:
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return ret;
+}
+
+static int iwmct_kick_fw(struct iwmct_priv *priv, bool jump)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_fw_load_hdr *hdr = (struct iwmct_fw_load_hdr *)parser->buf;
+	int ret;
+	u32 cmd;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+
+	memset(parser->buf, 0, parser->buf_size);
+	cmd = IWMC_CMD_SIGNATURE << CMD_HDR_SIGNATURE_POS;
+	if (jump) {
+		cmd |= IWMC_OPCODE_JUMP << CMD_HDR_OPCODE_POS;
+		hdr->target_addr = cpu_to_le32(parser->entry_point);
+		LOG_INFO(priv, FW_DOWNLOAD, "jump address 0x%x\n",
+				parser->entry_point);
+	} else {
+		cmd |= IWMC_OPCODE_LAST_COMMAND << CMD_HDR_OPCODE_POS;
+		LOG_INFO(priv, FW_DOWNLOAD, "last command\n");
+	}
+
+	hdr->cmd = cpu_to_le32(cmd);
+
+	LOG_HEXDUMP(FW_DOWNLOAD, parser->buf, sizeof(*hdr));
+	/* send it down */
+	/* TODO: add more proper sending and error checking */
+	ret = iwmct_tx(priv, 0, parser->buf, IWMC_SDIO_BLK_SIZE);
+	if (ret)
+		LOG_INFO(priv, FW_DOWNLOAD, "iwmct_tx returned %d", ret);
+
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return 0;
+}
+
+int iwmct_fw_load(struct iwmct_priv *priv)
+{
+	const u8 *fw_name = FW_NAME(FW_API_VER);
+	const struct firmware *raw;
+	const u8 *pdata;
+	size_t len;
+	__le32 addr;
+	int ret;
+
+	/* clear parser struct */
+	memset(&priv->parser, 0, sizeof(struct iwmct_parser));
+
+	/* get the firmware */
+	ret = request_firmware(&raw, fw_name, &priv->func->dev);
+	if (ret < 0) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "%s request_firmware failed %d\n",
+			  fw_name, ret);
+		goto exit;
+	}
+
+	if (raw->size < sizeof(struct iwmct_fw_sec_hdr)) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "%s smaller then (%zd) (%zd)\n",
+			  fw_name, sizeof(struct iwmct_fw_sec_hdr), raw->size);
+		goto exit;
+	}
+
+	LOG_INFO(priv, FW_DOWNLOAD, "Read firmware '%s'\n", fw_name);
+
+	ret = iwmct_fw_parser_init(priv, raw->data, raw->size, priv->trans_len);
+	if (ret < 0) {
+		LOG_ERROR(priv, FW_DOWNLOAD,
+			  "iwmct_parser_init failed: Reason %d\n", ret);
+		goto exit;
+	}
+
+	/* checksum  */
+	if (!iwmct_checksum(priv)) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "checksum error\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* download firmware to device */
+	while (iwmct_parse_next_section(priv, &pdata, &len, &addr)) {
+		if (iwmct_download_section(priv, pdata, len, addr)) {
+			LOG_ERROR(priv, FW_DOWNLOAD,
+				  "%s download section failed\n", fw_name);
+			ret = -EIO;
+			goto exit;
+		}
+	}
+
+	iwmct_kick_fw(priv, !!(priv->barker & BARKER_DNLOAD_JUMP_MSK));
+
+exit:
+	kfree(priv->parser.buf);
+
+	if (raw)
+		release_firmware(raw);
+
+	raw = NULL;
+
+	return ret;
+}
diff --git a/drivers/misc/iwmc3200top/fw-msg.h b/drivers/misc/iwmc3200top/fw-msg.h
new file mode 100644
index 0000000..9e26b75
--- /dev/null
+++ b/drivers/misc/iwmc3200top/fw-msg.h
@@ -0,0 +1,113 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/fw-msg.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __FWMSG_H__
+#define __FWMSG_H__
+
+#define COMM_TYPE_D2H           	0xFF
+#define COMM_TYPE_H2D           	0xEE
+
+#define COMM_CATEGORY_OPERATIONAL      	0x00
+#define COMM_CATEGORY_DEBUG            	0x01
+#define COMM_CATEGORY_TESTABILITY      	0x02
+#define COMM_CATEGORY_DIAGNOSTICS      	0x03
+
+#define OP_DBG_ZSTR_MSG			cpu_to_le16(0x1A)
+
+#define FW_LOG_SRC_MAX			32
+#define FW_LOG_SRC_ALL			255
+
+#define FW_STRING_TABLE_ADDR		cpu_to_le32(0x0C000000)
+
+#define CMD_DBG_LOG_LEVEL		cpu_to_le16(0x0001)
+#define CMD_TST_DEV_RESET		cpu_to_le16(0x0060)
+#define CMD_TST_FUNC_RESET		cpu_to_le16(0x0062)
+#define CMD_TST_IFACE_RESET		cpu_to_le16(0x0064)
+#define CMD_TST_CPU_UTILIZATION		cpu_to_le16(0x0065)
+#define CMD_TST_TOP_DEEP_SLEEP		cpu_to_le16(0x0080)
+#define CMD_TST_WAKEUP			cpu_to_le16(0x0081)
+#define CMD_TST_FUNC_WAKEUP		cpu_to_le16(0x0082)
+#define CMD_TST_FUNC_DEEP_SLEEP_REQUEST	cpu_to_le16(0x0083)
+#define CMD_TST_GET_MEM_DUMP		cpu_to_le16(0x0096)
+
+#define OP_OPR_ALIVE			cpu_to_le16(0x0010)
+#define OP_OPR_CMD_ACK			cpu_to_le16(0x001F)
+#define OP_OPR_CMD_NACK			cpu_to_le16(0x0020)
+#define OP_TST_MEM_DUMP			cpu_to_le16(0x0043)
+
+#define CMD_FLAG_PADDING_256		0x80
+
+#define FW_HCMD_BLOCK_SIZE      	256
+
+struct msg_hdr {
+	u8 type;
+	u8 category;
+	__le16 opcode;
+	u8 seqnum;
+	u8 flags;
+	__le16 length;
+} __attribute__((__packed__));
+
+struct log_hdr {
+	__le32 timestamp;
+	u8 severity;
+	u8 logsource;
+	__le16 reserved;
+} __attribute__((__packed__));
+
+struct mdump_hdr {
+	u8 dmpid;
+	u8 frag;
+	__le16 size;
+	__le32 addr;
+} __attribute__((__packed__));
+
+struct top_msg {
+	struct msg_hdr hdr;
+	union {
+		/* D2H messages */
+		struct {
+			struct log_hdr log_hdr;
+			u8 data[1];
+		} __attribute__((__packed__)) log;
+
+		struct {
+			struct log_hdr log_hdr;
+			struct mdump_hdr md_hdr;
+			u8 data[1];
+		} __attribute__((__packed__)) mdump;
+
+		/* H2D messages */
+		struct {
+			u8 logsource;
+			u8 sevmask;
+		} __attribute__((__packed__)) logdefs[FW_LOG_SRC_MAX];
+		struct mdump_hdr mdump_req;
+	} u;
+} __attribute__((__packed__));
+
+
+#endif /* __FWMSG_H__ */
diff --git a/drivers/misc/iwmc3200top/iwmc3200top.h b/drivers/misc/iwmc3200top/iwmc3200top.h
new file mode 100644
index 0000000..43bd510
--- /dev/null
+++ b/drivers/misc/iwmc3200top/iwmc3200top.h
@@ -0,0 +1,209 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/iwmc3200top.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __IWMC3200TOP_H__
+#define __IWMC3200TOP_H__
+
+#include <linux/workqueue.h>
+
+#define DRV_NAME "iwmc3200top"
+#define FW_API_VER 1
+#define _FW_NAME(api) DRV_NAME "." #api ".fw"
+#define FW_NAME(api) _FW_NAME(api)
+
+#define IWMC_SDIO_BLK_SIZE			256
+#define IWMC_DEFAULT_TR_BLK			64
+#define IWMC_SDIO_DATA_ADDR			0x0
+#define IWMC_SDIO_INTR_ENABLE_ADDR		0x14
+#define IWMC_SDIO_INTR_STATUS_ADDR		0x13
+#define IWMC_SDIO_INTR_CLEAR_ADDR		0x13
+#define IWMC_SDIO_INTR_GET_SIZE_ADDR		0x2C
+
+#define COMM_HUB_HEADER_LENGTH 16
+#define LOGGER_HEADER_LENGTH   10
+
+
+#define BARKER_DNLOAD_BT_POS		0
+#define BARKER_DNLOAD_BT_MSK		BIT(BARKER_DNLOAD_BT_POS)
+#define BARKER_DNLOAD_GPS_POS		1
+#define BARKER_DNLOAD_GPS_MSK		BIT(BARKER_DNLOAD_GPS_POS)
+#define BARKER_DNLOAD_TOP_POS		2
+#define BARKER_DNLOAD_TOP_MSK		BIT(BARKER_DNLOAD_TOP_POS)
+#define BARKER_DNLOAD_RESERVED1_POS	3
+#define BARKER_DNLOAD_RESERVED1_MSK	BIT(BARKER_DNLOAD_RESERVED1_POS)
+#define BARKER_DNLOAD_JUMP_POS		4
+#define BARKER_DNLOAD_JUMP_MSK		BIT(BARKER_DNLOAD_JUMP_POS)
+#define BARKER_DNLOAD_SYNC_POS		5
+#define BARKER_DNLOAD_SYNC_MSK		BIT(BARKER_DNLOAD_SYNC_POS)
+#define BARKER_DNLOAD_RESERVED2_POS	6
+#define BARKER_DNLOAD_RESERVED2_MSK	(0x3 << BARKER_DNLOAD_RESERVED2_POS)
+#define BARKER_DNLOAD_BARKER_POS	8
+#define BARKER_DNLOAD_BARKER_MSK	(0xffffff << BARKER_DNLOAD_BARKER_POS)
+
+#define IWMC_BARKER_REBOOT 	(0xdeadbe << BARKER_DNLOAD_BARKER_POS)
+/* whole field barker */
+#define IWMC_BARKER_ACK 	0xfeedbabe
+
+#define IWMC_CMD_SIGNATURE 	0xcbbc
+
+#define CMD_HDR_OPCODE_POS		0
+#define CMD_HDR_OPCODE_MSK_MSK		(0xf << CMD_HDR_OPCODE_MSK_POS)
+#define CMD_HDR_RESPONSE_CODE_POS	4
+#define CMD_HDR_RESPONSE_CODE_MSK	(0xf << CMD_HDR_RESPONSE_CODE_POS)
+#define CMD_HDR_USE_CHECKSUM_POS	8
+#define CMD_HDR_USE_CHECKSUM_MSK	BIT(CMD_HDR_USE_CHECKSUM_POS)
+#define CMD_HDR_RESPONSE_REQUIRED_POS	9
+#define CMD_HDR_RESPONSE_REQUIRED_MSK	BIT(CMD_HDR_RESPONSE_REQUIRED_POS)
+#define CMD_HDR_DIRECT_ACCESS_POS	10
+#define CMD_HDR_DIRECT_ACCESS_MSK	BIT(CMD_HDR_DIRECT_ACCESS_POS)
+#define CMD_HDR_RESERVED_POS		11
+#define CMD_HDR_RESERVED_MSK		BIT(0x1f << CMD_HDR_RESERVED_POS)
+#define CMD_HDR_SIGNATURE_POS		16
+#define CMD_HDR_SIGNATURE_MSK		BIT(0xffff << CMD_HDR_SIGNATURE_POS)
+
+enum {
+	IWMC_OPCODE_PING = 0,
+	IWMC_OPCODE_READ = 1,
+	IWMC_OPCODE_WRITE = 2,
+	IWMC_OPCODE_JUMP = 3,
+	IWMC_OPCODE_REBOOT = 4,
+	IWMC_OPCODE_PERSISTENT_WRITE = 5,
+	IWMC_OPCODE_PERSISTENT_READ = 6,
+	IWMC_OPCODE_READ_MODIFY_WRITE = 7,
+	IWMC_OPCODE_LAST_COMMAND = 15
+};
+
+struct iwmct_fw_load_hdr {
+	__le32 cmd;
+	__le32 target_addr;
+	__le32 data_size;
+	__le32 block_chksm;
+	u8 data[0];
+};
+
+/**
+ * struct iwmct_fw_hdr
+ * holds all sw components versions
+ */
+struct iwmct_fw_hdr {
+	u8 top_major;
+	u8 top_minor;
+	u8 top_revision;
+	u8 gps_major;
+	u8 gps_minor;
+	u8 gps_revision;
+	u8 bt_major;
+	u8 bt_minor;
+	u8 bt_revision;
+	u8 tic_name[31];
+};
+
+/**
+ * struct iwmct_fw_sec_hdr
+ * @type: function type
+ * @data_size: section's data size
+ * @target_addr: download address
+ */
+struct iwmct_fw_sec_hdr {
+	u8 type[4];
+	__le32 data_size;
+	__le32 target_addr;
+};
+
+/**
+ * struct iwmct_parser
+ * @file: fw image
+ * @file_size: fw size
+ * @cur_pos: position in file
+ * @buf: temp buf for download
+ * @buf_size: size of buf
+ * @entry_point: address to jump in fw kick-off
+ */
+struct iwmct_parser {
+	const u8 *file;
+	size_t file_size;
+	size_t cur_pos;
+	u8 *buf;
+	size_t buf_size;
+	u32 entry_point;
+	struct iwmct_fw_hdr versions;
+};
+
+
+struct iwmct_work_struct {
+	struct list_head list;
+	ssize_t iosize;
+};
+
+struct iwmct_dbg {
+	int blocks;
+	bool dump;
+	bool jump;
+	bool direct;
+	bool checksum;
+	bool fw_download;
+	int block_size;
+	int download_trans_blks;
+
+	char label_fw[256];
+};
+
+struct iwmct_debugfs;
+
+struct iwmct_priv {
+	struct sdio_func *func;
+	struct iwmct_debugfs *dbgfs;
+	struct iwmct_parser parser;
+	atomic_t reset;
+	atomic_t dev_sync;
+	u32 trans_len;
+	u32 barker;
+	struct iwmct_dbg dbg;
+
+	/* drivers work queue */
+	struct workqueue_struct *wq;
+	struct workqueue_struct *bus_rescan_wq;
+	struct work_struct bus_rescan_worker;
+	struct work_struct isr_worker;
+
+	/* drivers wait queue */
+	wait_queue_head_t wait_q;
+
+	/* rx request list */
+	struct list_head read_req_list;
+};
+
+extern int iwmct_tx(struct iwmct_priv *priv, unsigned int addr,
+		void *src, int count);
+
+extern int iwmct_fw_load(struct iwmct_priv *priv);
+
+extern void iwmct_dbg_init_params(struct iwmct_priv *drv);
+extern void iwmct_dbg_init_drv_attrs(struct device_driver *drv);
+extern void iwmct_dbg_remove_drv_attrs(struct device_driver *drv);
+extern int iwmct_send_hcmd(struct iwmct_priv *priv, u8 *cmd, u16 len);
+
+#endif  /*  __IWMC3200TOP_H__  */
diff --git a/drivers/misc/iwmc3200top/log.c b/drivers/misc/iwmc3200top/log.c
new file mode 100644
index 0000000..d569279
--- /dev/null
+++ b/drivers/misc/iwmc3200top/log.c
@@ -0,0 +1,347 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/log.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/ctype.h>
+#include "fw-msg.h"
+#include "iwmc3200top.h"
+#include "log.h"
+
+/* Maximal hexadecimal string size of the FW memdump message */
+#define LOG_MSG_SIZE_MAX		12400
+
+/* iwmct_logdefs is a global used by log macros */
+u8 iwmct_logdefs[LOG_SRC_MAX];
+static u8 iwmct_fw_logdefs[FW_LOG_SRC_MAX];
+
+
+static int _log_set_log_filter(u8 *logdefs, int size, u8 src, u8 logmask)
+{
+	int i;
+
+	if (src < size)
+		logdefs[src] = logmask;
+	else if (src == LOG_SRC_ALL)
+		for (i = 0; i < size; i++)
+			logdefs[i] = logmask;
+	else
+		return -1;
+
+	return 0;
+}
+
+
+int iwmct_log_set_filter(u8 src, u8 logmask)
+{
+	return _log_set_log_filter(iwmct_logdefs, LOG_SRC_MAX, src, logmask);
+}
+
+
+int iwmct_log_set_fw_filter(u8 src, u8 logmask)
+{
+	return _log_set_log_filter(iwmct_fw_logdefs,
+				   FW_LOG_SRC_MAX, src, logmask);
+}
+
+
+static int log_msg_format_hex(char *str, int slen, u8 *ibuf,
+			      int ilen, char *pref)
+{
+	int pos = 0;
+	int i;
+	int len;
+
+	for (pos = 0, i = 0; pos < slen - 2 && pref[i] != '\0'; i++, pos++)
+		str[pos] = pref[i];
+
+	for (i = 0; pos < slen - 2 && i < ilen; pos += len, i++)
+		len = snprintf(&str[pos], slen - pos - 1, " %2.2X", ibuf[i]);
+
+	if (i < ilen)
+		return -1;
+
+	return 0;
+}
+
+/*	NOTE: This function is not thread safe.
+	Currently it's called only from sdio rx worker - no race there
+*/
+void iwmct_log_top_message(struct iwmct_priv *priv, u8 *buf, int len)
+{
+	struct top_msg *msg;
+	static char logbuf[LOG_MSG_SIZE_MAX];
+
+	msg = (struct top_msg *)buf;
+
+	if (len < sizeof(msg->hdr) + sizeof(msg->u.log.log_hdr)) {
+		LOG_ERROR(priv, FW_MSG, "Log message from TOP "
+			  "is too short %d (expected %zd)\n",
+			  len, sizeof(msg->hdr) + sizeof(msg->u.log.log_hdr));
+		return;
+	}
+
+	if (!(iwmct_fw_logdefs[msg->u.log.log_hdr.logsource] &
+		BIT(msg->u.log.log_hdr.severity)) ||
+	    !(iwmct_logdefs[LOG_SRC_FW_MSG] & BIT(msg->u.log.log_hdr.severity)))
+		return;
+
+	switch (msg->hdr.category) {
+	case COMM_CATEGORY_TESTABILITY:
+		if (!(iwmct_logdefs[LOG_SRC_TST] &
+		      BIT(msg->u.log.log_hdr.severity)))
+			return;
+		if (log_msg_format_hex(logbuf, LOG_MSG_SIZE_MAX, buf,
+				       le16_to_cpu(msg->hdr.length) +
+				       sizeof(msg->hdr), "<TST>"))
+			LOG_WARNING(priv, TST,
+				  "TOP TST message is too long, truncating...");
+		LOG_WARNING(priv, TST, "%s\n", logbuf);
+		break;
+	case COMM_CATEGORY_DEBUG:
+		if (msg->hdr.opcode == OP_DBG_ZSTR_MSG)
+			LOG_INFO(priv, FW_MSG, "%s %s", "<DBG>",
+				       ((u8 *)msg) + sizeof(msg->hdr)
+					+ sizeof(msg->u.log.log_hdr));
+		else {
+			if (log_msg_format_hex(logbuf, LOG_MSG_SIZE_MAX, buf,
+					le16_to_cpu(msg->hdr.length)
+						+ sizeof(msg->hdr),
+					"<DBG>"))
+				LOG_WARNING(priv, FW_MSG,
+					"TOP DBG message is too long,"
+					"truncating...");
+			LOG_WARNING(priv, FW_MSG, "%s\n", logbuf);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int _log_get_filter_str(u8 *logdefs, int logdefsz, char *buf, int size)
+{
+	int i, pos, len;
+	for (i = 0, pos = 0; (pos < size-1) && (i < logdefsz); i++) {
+		len = snprintf(&buf[pos], size - pos - 1, "0x%02X%02X,",
+				i, logdefs[i]);
+		pos += len;
+	}
+	buf[pos-1] = '\n';
+	buf[pos] = '\0';
+
+	if (i < logdefsz)
+		return -1;
+	return 0;
+}
+
+int log_get_filter_str(char *buf, int size)
+{
+	return _log_get_filter_str(iwmct_logdefs, LOG_SRC_MAX, buf, size);
+}
+
+int log_get_fw_filter_str(char *buf, int size)
+{
+	return _log_get_filter_str(iwmct_fw_logdefs, FW_LOG_SRC_MAX, buf, size);
+}
+
+#define HEXADECIMAL_RADIX	16
+#define LOG_SRC_FORMAT		7 /* log level is in format of "0xXXXX," */
+
+ssize_t show_iwmct_log_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	char *str_buf;
+	int buf_size;
+	ssize_t ret;
+
+	buf_size = (LOG_SRC_FORMAT * LOG_SRC_MAX) + 1;
+	str_buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %d bytes\n", buf_size);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	if (log_get_filter_str(str_buf, buf_size) < 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = sprintf(buf, "%s", str_buf);
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
+ssize_t store_iwmct_log_level(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	char *token, *str_buf = NULL;
+	long val;
+	ssize_t ret = count;
+	u8 src, mask;
+
+	if (!count)
+		goto exit;
+
+	str_buf = kzalloc(count, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %zd bytes\n", count);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	memcpy(str_buf, buf, count);
+
+	while ((token = strsep(&str_buf, ",")) != NULL) {
+		while (isspace(*token))
+			++token;
+		if (strict_strtol(token, HEXADECIMAL_RADIX, &val)) {
+			LOG_ERROR(priv, DEBUGFS,
+				  "failed to convert string to long %s\n",
+				  token);
+			ret = -EINVAL;
+			goto exit;
+		}
+
+		mask  = val & 0xFF;
+		src = (val & 0XFF00) >> 8;
+		iwmct_log_set_filter(src, mask);
+	}
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
+ssize_t show_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr, char *buf)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	char *str_buf;
+	int buf_size;
+	ssize_t ret;
+
+	buf_size = (LOG_SRC_FORMAT * FW_LOG_SRC_MAX) + 2;
+
+	str_buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %d bytes\n", buf_size);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	if (log_get_fw_filter_str(str_buf, buf_size) < 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = sprintf(buf, "%s", str_buf);
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
+ssize_t store_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	struct top_msg cmd;
+	char *token, *str_buf = NULL;
+	ssize_t ret = count;
+	u16 cmdlen = 0;
+	int i;
+	long val;
+	u8 src, mask;
+
+	if (!count)
+		goto exit;
+
+	str_buf = kzalloc(count, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %zd bytes\n", count);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	memcpy(str_buf, buf, count);
+
+	cmd.hdr.type = COMM_TYPE_H2D;
+	cmd.hdr.category = COMM_CATEGORY_DEBUG;
+	cmd.hdr.opcode = CMD_DBG_LOG_LEVEL;
+
+	for (i = 0; ((token = strsep(&str_buf, ",")) != NULL) &&
+		     (i < FW_LOG_SRC_MAX); i++) {
+
+		while (isspace(*token))
+			++token;
+
+		if (strict_strtol(token, HEXADECIMAL_RADIX, &val)) {
+			LOG_ERROR(priv, DEBUGFS,
+				  "failed to convert string to long %s\n",
+				  token);
+			ret = -EINVAL;
+			goto exit;
+		}
+
+		mask  = val & 0xFF; /* LSB */
+		src = (val & 0XFF00) >> 8; /* 2nd least significant byte. */
+		iwmct_log_set_fw_filter(src, mask);
+
+		cmd.u.logdefs[i].logsource = src;
+		cmd.u.logdefs[i].sevmask = mask;
+	}
+
+	cmd.hdr.length = cpu_to_le16(i * sizeof(cmd.u.logdefs[0]));
+	cmdlen = (i * sizeof(cmd.u.logdefs[0]) + sizeof(cmd.hdr));
+
+	ret = iwmct_send_hcmd(priv, (u8 *)&cmd, cmdlen);
+	if (ret) {
+		LOG_ERROR(priv, DEBUGFS,
+			  "Failed to send %d bytes of fwcmd, ret=%zd\n",
+			  cmdlen, ret);
+		goto exit;
+	} else
+		LOG_INFO(priv, DEBUGFS, "fwcmd sent (%d bytes)\n", cmdlen);
+
+	ret = count;
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
diff --git a/drivers/misc/iwmc3200top/log.h b/drivers/misc/iwmc3200top/log.h
new file mode 100644
index 0000000..aba8121
--- /dev/null
+++ b/drivers/misc/iwmc3200top/log.h
@@ -0,0 +1,158 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/log.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __LOG_H__
+#define __LOG_H__
+
+
+/* log severity:
+ * The log levels here match FW log levels
+ * so values need to stay as is */
+#define LOG_SEV_CRITICAL		0
+#define LOG_SEV_ERROR			1
+#define LOG_SEV_WARNING			2
+#define LOG_SEV_INFO			3
+#define LOG_SEV_INFOEX			4
+
+#define LOG_SEV_FILTER_ALL		\
+	(BIT(LOG_SEV_CRITICAL) |	\
+	 BIT(LOG_SEV_ERROR)    |	\
+	 BIT(LOG_SEV_WARNING)  | 	\
+	 BIT(LOG_SEV_INFO)     |	\
+	 BIT(LOG_SEV_INFOEX))
+
+/* log source */
+#define LOG_SRC_INIT			0
+#define LOG_SRC_DEBUGFS			1
+#define LOG_SRC_FW_DOWNLOAD		2
+#define LOG_SRC_FW_MSG			3
+#define LOG_SRC_TST			4
+#define LOG_SRC_IRQ			5
+
+#define	LOG_SRC_MAX			6
+#define	LOG_SRC_ALL			0xFF
+
+/**
+ * Default intitialization runtime log level
+ */
+#ifndef LOG_SEV_FILTER_RUNTIME
+#define LOG_SEV_FILTER_RUNTIME			\
+	(BIT(LOG_SEV_CRITICAL)	|		\
+	 BIT(LOG_SEV_ERROR)	|		\
+	 BIT(LOG_SEV_WARNING))
+#endif
+
+#ifndef FW_LOG_SEV_FILTER_RUNTIME
+#define FW_LOG_SEV_FILTER_RUNTIME	LOG_SEV_FILTER_ALL
+#endif
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+/**
+ * Log macros
+ */
+
+#define priv2dev(priv) (&(priv->func)->dev)
+
+#define LOG_CRITICAL(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_CRITICAL))	\
+		dev_crit(priv2dev(priv), "%s %d: " fmt,			\
+			__func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_ERROR(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_ERROR))	\
+		dev_err(priv2dev(priv), "%s %d: " fmt,			\
+			__func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_WARNING(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_WARNING))	\
+		dev_warn(priv2dev(priv), "%s %d: " fmt,			\
+			 __func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_INFO(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_INFO))		\
+		dev_info(priv2dev(priv), "%s %d: " fmt,			\
+			 __func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_INFOEX(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_INFOEX))	\
+		dev_dbg(priv2dev(priv), "%s %d: " fmt,			\
+			 __func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_HEXDUMP(src, ptr, len)					\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_INFOEX))	\
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_NONE,	\
+				16, 1, ptr, len, false);		\
+} while (0)
+
+void iwmct_log_top_message(struct iwmct_priv *priv, u8 *buf, int len);
+
+extern u8 iwmct_logdefs[];
+
+int iwmct_log_set_filter(u8 src, u8 logmask);
+int iwmct_log_set_fw_filter(u8 src, u8 logmask);
+
+ssize_t show_iwmct_log_level(struct device *d,
+			struct device_attribute *attr, char *buf);
+ssize_t store_iwmct_log_level(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count);
+ssize_t show_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr, char *buf);
+ssize_t store_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count);
+
+#else
+
+#define LOG_CRITICAL(priv, src, fmt, args...)
+#define LOG_ERROR(priv, src, fmt, args...)
+#define LOG_WARNING(priv, src, fmt, args...)
+#define LOG_INFO(priv, src, fmt, args...)
+#define LOG_INFOEX(priv, src, fmt, args...)
+#define LOG_HEXDUMP(src, ptr, len)
+
+static inline void iwmct_log_top_message(struct iwmct_priv *priv,
+					 u8 *buf, int len) {}
+static inline int iwmct_log_set_filter(u8 src, u8 logmask) { return 0; }
+static inline int iwmct_log_set_fw_filter(u8 src, u8 logmask) { return 0; }
+
+#endif /* CONFIG_IWMC3200TOP_DEBUG */
+
+int log_get_filter_str(char *buf, int size);
+int log_get_fw_filter_str(char *buf, int size);
+
+#endif /* __LOG_H__ */
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
new file mode 100644
index 0000000..fafcaa4
--- /dev/null
+++ b/drivers/misc/iwmc3200top/main.c
@@ -0,0 +1,678 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/main.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+
+#include "iwmc3200top.h"
+#include "log.h"
+#include "fw-msg.h"
+#include "debugfs.h"
+
+
+#define DRIVER_DESCRIPTION "Intel(R) IWMC 3200 Top Driver"
+#define DRIVER_COPYRIGHT "Copyright (c) 2008 Intel Corporation."
+
+#define DRIVER_VERSION  "0.1.62"
+
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRIVER_COPYRIGHT);
+MODULE_FIRMWARE(FW_NAME(FW_API_VER));
+
+/*
+ * This workers main task is to wait for OP_OPR_ALIVE
+ * from TOP FW until ALIVE_MSG_TIMOUT timeout is elapsed.
+ * When OP_OPR_ALIVE received it will issue
+ * a call to "bus_rescan_devices".
+ */
+static void iwmct_rescan_worker(struct work_struct *ws)
+{
+	struct iwmct_priv *priv;
+	int ret;
+
+	priv = container_of(ws, struct iwmct_priv, bus_rescan_worker);
+
+	LOG_INFO(priv, FW_MSG, "Calling bus_rescan\n");
+
+	ret = bus_rescan_devices(priv->func->dev.bus);
+	if (ret < 0)
+		LOG_INFO(priv, FW_DOWNLOAD, "bus_rescan_devices FAILED!!!\n");
+}
+
+static void op_top_message(struct iwmct_priv *priv, struct top_msg *msg)
+{
+	switch (msg->hdr.opcode) {
+	case OP_OPR_ALIVE:
+		LOG_INFO(priv, FW_MSG, "Got ALIVE from device, wake rescan\n");
+		queue_work(priv->bus_rescan_wq, &priv->bus_rescan_worker);
+		break;
+	default:
+		LOG_INFO(priv, FW_MSG, "Received msg opcode 0x%X\n",
+			msg->hdr.opcode);
+		break;
+	}
+}
+
+
+static void handle_top_message(struct iwmct_priv *priv, u8 *buf, int len)
+{
+	struct top_msg *msg;
+
+	msg = (struct top_msg *)buf;
+
+	if (msg->hdr.type != COMM_TYPE_D2H) {
+		LOG_ERROR(priv, FW_MSG,
+			"Message from TOP with invalid message type 0x%X\n",
+			msg->hdr.type);
+		return;
+	}
+
+	if (len < sizeof(msg->hdr)) {
+		LOG_ERROR(priv, FW_MSG,
+			"Message from TOP is too short for message header "
+			"received %d bytes, expected at least %zd bytes\n",
+			len, sizeof(msg->hdr));
+		return;
+	}
+
+	if (len < le16_to_cpu(msg->hdr.length) + sizeof(msg->hdr)) {
+		LOG_ERROR(priv, FW_MSG,
+			"Message length (%d bytes) is shorter than "
+			"in header (%d bytes)\n",
+			len, le16_to_cpu(msg->hdr.length));
+		return;
+	}
+
+	switch (msg->hdr.category) {
+	case COMM_CATEGORY_OPERATIONAL:
+		op_top_message(priv, (struct top_msg *)buf);
+		break;
+
+	case COMM_CATEGORY_DEBUG:
+	case COMM_CATEGORY_TESTABILITY:
+	case COMM_CATEGORY_DIAGNOSTICS:
+		iwmct_log_top_message(priv, buf, len);
+		break;
+
+	default:
+		LOG_ERROR(priv, FW_MSG,
+			"Message from TOP with unknown category 0x%X\n",
+			msg->hdr.category);
+		break;
+	}
+}
+
+int iwmct_send_hcmd(struct iwmct_priv *priv, u8 *cmd, u16 len)
+{
+	int ret;
+	u8 *buf;
+
+	LOG_INFOEX(priv, FW_MSG, "Sending hcmd:\n");
+
+	/* add padding to 256 for IWMC */
+	((struct top_msg *)cmd)->hdr.flags |= CMD_FLAG_PADDING_256;
+
+	LOG_HEXDUMP(FW_MSG, cmd, len);
+
+	if (len > FW_HCMD_BLOCK_SIZE) {
+		LOG_ERROR(priv, FW_MSG, "size %d exceeded hcmd max size %d\n",
+			  len, FW_HCMD_BLOCK_SIZE);
+		return -1;
+	}
+
+	buf = kzalloc(FW_HCMD_BLOCK_SIZE, GFP_KERNEL);
+	if (!buf) {
+		LOG_ERROR(priv, FW_MSG, "kzalloc error, buf size %d\n",
+			  FW_HCMD_BLOCK_SIZE);
+		return -1;
+	}
+
+	memcpy(buf, cmd, len);
+
+	sdio_claim_host(priv->func);
+	ret = sdio_memcpy_toio(priv->func, IWMC_SDIO_DATA_ADDR, buf,
+			       FW_HCMD_BLOCK_SIZE);
+	sdio_release_host(priv->func);
+
+	kfree(buf);
+	return ret;
+}
+
+int iwmct_tx(struct iwmct_priv *priv, unsigned int addr,
+	void *src, int count)
+{
+	int ret;
+
+	sdio_claim_host(priv->func);
+	ret = sdio_memcpy_toio(priv->func, addr, src, count);
+	sdio_release_host(priv->func);
+
+	return ret;
+}
+
+static void iwmct_irq_read_worker(struct work_struct *ws)
+{
+	struct iwmct_priv *priv;
+	struct iwmct_work_struct *read_req;
+	__le32 *buf = NULL;
+	int ret;
+	int iosize;
+	u32 barker;
+	bool is_barker;
+
+	priv = container_of(ws, struct iwmct_priv, isr_worker);
+
+	LOG_INFO(priv, IRQ, "enter iwmct_irq_read_worker %p\n", ws);
+
+	/* --------------------- Handshake with device -------------------- */
+	sdio_claim_host(priv->func);
+
+	/* all list manipulations have to be protected by
+	 * sdio_claim_host/sdio_release_host */
+	if (list_empty(&priv->read_req_list)) {
+		LOG_ERROR(priv, IRQ, "read_req_list empty in read worker\n");
+		goto exit_release;
+	}
+
+	read_req = list_entry(priv->read_req_list.next,
+			      struct iwmct_work_struct, list);
+
+	list_del(&read_req->list);
+	iosize = read_req->iosize;
+	kfree(read_req);
+
+	buf = kzalloc(iosize, GFP_KERNEL);
+	if (!buf) {
+		LOG_ERROR(priv, IRQ, "kzalloc error, buf size %d\n", iosize);
+		goto exit_release;
+	}
+
+	LOG_INFO(priv, IRQ, "iosize=%d, buf=%p, func=%d\n",
+				iosize, buf, priv->func->num);
+
+	/* read from device */
+	ret = sdio_memcpy_fromio(priv->func, buf, IWMC_SDIO_DATA_ADDR, iosize);
+	if (ret) {
+		LOG_ERROR(priv, IRQ, "error %d reading buffer\n", ret);
+		goto exit_release;
+	}
+
+	LOG_HEXDUMP(IRQ, (u8 *)buf, iosize);
+
+	barker = le32_to_cpu(buf[0]);
+
+	/* Verify whether it's a barker and if not - treat as regular Rx */
+	if (barker == IWMC_BARKER_ACK ||
+	    (barker & BARKER_DNLOAD_BARKER_MSK) == IWMC_BARKER_REBOOT) {
+
+		/* Valid Barker is equal on first 4 dwords */
+		is_barker = (buf[1] == buf[0]) &&
+			    (buf[2] == buf[0]) &&
+			    (buf[3] == buf[0]);
+
+		if (!is_barker) {
+			LOG_WARNING(priv, IRQ,
+				"Potentially inconsistent barker "
+				"%08X_%08X_%08X_%08X\n",
+				le32_to_cpu(buf[0]), le32_to_cpu(buf[1]),
+				le32_to_cpu(buf[2]), le32_to_cpu(buf[3]));
+		}
+	} else {
+		is_barker = false;
+	}
+
+	/* Handle Top CommHub message */
+	if (!is_barker) {
+		sdio_release_host(priv->func);
+		handle_top_message(priv, (u8 *)buf, iosize);
+		goto exit;
+	} else if (barker == IWMC_BARKER_ACK) { /* Handle barkers */
+		if (atomic_read(&priv->dev_sync) == 0) {
+			LOG_ERROR(priv, IRQ,
+				  "ACK barker arrived out-of-sync\n");
+			goto exit_release;
+		}
+
+		/* Continuing to FW download (after Sync is completed)*/
+		atomic_set(&priv->dev_sync, 0);
+		LOG_INFO(priv, IRQ, "ACK barker arrived "
+				"- starting FW download\n");
+	} else { /* REBOOT barker */
+		LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker);
+		priv->barker = barker;
+
+		if (barker & BARKER_DNLOAD_SYNC_MSK) {
+			/* Send the same barker back */
+			ret = sdio_memcpy_toio(priv->func, IWMC_SDIO_DATA_ADDR,
+					       buf, iosize);
+			if (ret) {
+				LOG_ERROR(priv, IRQ,
+					 "error %d echoing barker\n", ret);
+				goto exit_release;
+			}
+			LOG_INFO(priv, IRQ, "Echoing barker to device\n");
+			atomic_set(&priv->dev_sync, 1);
+			goto exit_release;
+		}
+
+		/* Continuing to FW download (without Sync) */
+		LOG_INFO(priv, IRQ, "No sync requested "
+				    "- starting FW download\n");
+	}
+
+	sdio_release_host(priv->func);
+
+
+	LOG_INFO(priv, IRQ, "barker download request 0x%x is:\n", priv->barker);
+	LOG_INFO(priv, IRQ, "*******  Top FW %s requested ********\n",
+			(priv->barker & BARKER_DNLOAD_TOP_MSK) ? "was" : "not");
+	LOG_INFO(priv, IRQ, "*******  GPS FW %s requested ********\n",
+			(priv->barker & BARKER_DNLOAD_GPS_MSK) ? "was" : "not");
+	LOG_INFO(priv, IRQ, "*******  BT FW %s requested ********\n",
+			(priv->barker & BARKER_DNLOAD_BT_MSK) ? "was" : "not");
+
+	if (priv->dbg.fw_download)
+		iwmct_fw_load(priv);
+	else
+		LOG_ERROR(priv, IRQ, "FW download not allowed\n");
+
+	goto exit;
+
+exit_release:
+	sdio_release_host(priv->func);
+exit:
+	kfree(buf);
+	LOG_INFO(priv, IRQ, "exit iwmct_irq_read_worker\n");
+}
+
+static void iwmct_irq(struct sdio_func *func)
+{
+	struct iwmct_priv *priv;
+	int val, ret;
+	int iosize;
+	int addr = IWMC_SDIO_INTR_GET_SIZE_ADDR;
+	struct iwmct_work_struct *read_req;
+
+	priv = sdio_get_drvdata(func);
+
+	LOG_INFO(priv, IRQ, "enter iwmct_irq\n");
+
+	/* read the function's status register */
+	val = sdio_readb(func, IWMC_SDIO_INTR_STATUS_ADDR, &ret);
+
+	LOG_INFO(priv, IRQ, "iir value = %d, ret=%d\n", val, ret);
+
+	if (!val) {
+		LOG_ERROR(priv, IRQ, "iir = 0, exiting ISR\n");
+		goto exit_clear_intr;
+	}
+
+
+	/*
+	 * read 2 bytes of the transaction size
+	 * IMPORTANT: sdio transaction size has to be read before clearing
+	 * sdio interrupt!!!
+	 */
+	val = sdio_readb(priv->func, addr++, &ret);
+	iosize = val;
+	val = sdio_readb(priv->func, addr++, &ret);
+	iosize += val << 8;
+
+	LOG_INFO(priv, IRQ, "READ size %d\n", iosize);
+
+	if (iosize == 0) {
+		LOG_ERROR(priv, IRQ, "READ size %d, exiting ISR\n", iosize);
+		goto exit_clear_intr;
+	}
+
+	/* allocate a work structure to pass iosize to the worker */
+	read_req = kzalloc(sizeof(struct iwmct_work_struct), GFP_KERNEL);
+	if (!read_req) {
+		LOG_ERROR(priv, IRQ, "failed to allocate read_req, exit ISR\n");
+		goto exit_clear_intr;
+	}
+
+	INIT_LIST_HEAD(&read_req->list);
+	read_req->iosize = iosize;
+
+	list_add_tail(&priv->read_req_list, &read_req->list);
+
+	/* clear the function's interrupt request bit (write 1 to clear) */
+	sdio_writeb(func, 1, IWMC_SDIO_INTR_CLEAR_ADDR, &ret);
+
+	queue_work(priv->wq, &priv->isr_worker);
+
+	LOG_INFO(priv, IRQ, "exit iwmct_irq\n");
+
+	return;
+
+exit_clear_intr:
+	/* clear the function's interrupt request bit (write 1 to clear) */
+	sdio_writeb(func, 1, IWMC_SDIO_INTR_CLEAR_ADDR, &ret);
+}
+
+
+static int blocks;
+module_param(blocks, int, 0604);
+MODULE_PARM_DESC(blocks, "max_blocks_to_send");
+
+static int dump;
+module_param(dump, bool, 0604);
+MODULE_PARM_DESC(dump, "dump_hex_content");
+
+static int jump = 1;
+module_param(jump, bool, 0604);
+
+static int direct = 1;
+module_param(direct, bool, 0604);
+
+static int checksum = 1;
+module_param(checksum, bool, 0604);
+
+static int fw_download = 1;
+module_param(fw_download, bool, 0604);
+
+static int block_size = IWMC_SDIO_BLK_SIZE;
+module_param(block_size, int, 0404);
+
+static int download_trans_blks = IWMC_DEFAULT_TR_BLK;
+module_param(download_trans_blks, int, 0604);
+
+static int rubbish_barker;
+module_param(rubbish_barker, bool, 0604);
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+static int log_level[LOG_SRC_MAX];
+static unsigned int log_level_argc;
+module_param_array(log_level, int, &log_level_argc, 0604);
+MODULE_PARM_DESC(log_level, "log_level");
+
+static int log_level_fw[FW_LOG_SRC_MAX];
+static unsigned int log_level_fw_argc;
+module_param_array(log_level_fw, int, &log_level_fw_argc, 0604);
+MODULE_PARM_DESC(log_level_fw, "log_level_fw");
+#endif
+
+void iwmct_dbg_init_params(struct iwmct_priv *priv)
+{
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+	int i;
+
+	for (i = 0; i < log_level_argc; i++) {
+		dev_notice(&priv->func->dev, "log_level[%d]=0x%X\n",
+						i, log_level[i]);
+		iwmct_log_set_filter((log_level[i] >> 8) & 0xFF,
+			       log_level[i] & 0xFF);
+	}
+	for (i = 0; i < log_level_fw_argc; i++) {
+		dev_notice(&priv->func->dev, "log_level_fw[%d]=0x%X\n",
+						i, log_level_fw[i]);
+		iwmct_log_set_fw_filter((log_level_fw[i] >> 8) & 0xFF,
+				  log_level_fw[i] & 0xFF);
+	}
+#endif
+
+	priv->dbg.blocks = blocks;
+	LOG_INFO(priv, INIT, "blocks=%d\n", blocks);
+	priv->dbg.dump = (bool)dump;
+	LOG_INFO(priv, INIT, "dump=%d\n", dump);
+	priv->dbg.jump = (bool)jump;
+	LOG_INFO(priv, INIT, "jump=%d\n", jump);
+	priv->dbg.direct = (bool)direct;
+	LOG_INFO(priv, INIT, "direct=%d\n", direct);
+	priv->dbg.checksum = (bool)checksum;
+	LOG_INFO(priv, INIT, "checksum=%d\n", checksum);
+	priv->dbg.fw_download = (bool)fw_download;
+	LOG_INFO(priv, INIT, "fw_download=%d\n", fw_download);
+	priv->dbg.block_size = block_size;
+	LOG_INFO(priv, INIT, "block_size=%d\n", block_size);
+	priv->dbg.download_trans_blks = download_trans_blks;
+	LOG_INFO(priv, INIT, "download_trans_blks=%d\n", download_trans_blks);
+}
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+static ssize_t show_iwmct_fw_version(struct device *d,
+				  struct device_attribute *attr, char *buf)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "%s\n", priv->dbg.label_fw);
+}
+static DEVICE_ATTR(cc_label_fw, S_IRUGO, show_iwmct_fw_version, NULL);
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+static DEVICE_ATTR(log_level, S_IWUSR | S_IRUGO,
+		   show_iwmct_log_level, store_iwmct_log_level);
+static DEVICE_ATTR(log_level_fw, S_IWUSR | S_IRUGO,
+		   show_iwmct_log_level_fw, store_iwmct_log_level_fw);
+#endif
+
+static struct attribute *iwmct_sysfs_entries[] = {
+	&dev_attr_cc_label_fw.attr,
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+	&dev_attr_log_level.attr,
+	&dev_attr_log_level_fw.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group iwmct_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = iwmct_sysfs_entries,
+};
+
+
+static int iwmct_probe(struct sdio_func *func,
+			   const struct sdio_device_id *id)
+{
+	struct iwmct_priv *priv;
+	int ret;
+	int val = 1;
+	int addr = IWMC_SDIO_INTR_ENABLE_ADDR;
+
+	dev_dbg(&func->dev, "enter iwmct_probe\n");
+
+	dev_dbg(&func->dev, "IRQ polling period id %u msecs, HZ is %d\n",
+		jiffies_to_msecs(2147483647), HZ);
+
+	priv = kzalloc(sizeof(struct iwmct_priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&func->dev, "kzalloc error\n");
+		return -ENOMEM;
+	}
+	priv->func = func;
+	sdio_set_drvdata(func, priv);
+
+
+	/* create drivers work queue */
+	priv->wq = create_workqueue(DRV_NAME "_wq");
+	priv->bus_rescan_wq = create_workqueue(DRV_NAME "_rescan_wq");
+	INIT_WORK(&priv->bus_rescan_worker, iwmct_rescan_worker);
+	INIT_WORK(&priv->isr_worker, iwmct_irq_read_worker);
+
+	init_waitqueue_head(&priv->wait_q);
+
+	sdio_claim_host(func);
+	/* FIXME: Remove after it is fixed in the Boot ROM upgrade */
+	func->enable_timeout = 10;
+
+	/* In our HW, setting the block size also wakes up the boot rom. */
+	ret = sdio_set_block_size(func, priv->dbg.block_size);
+	if (ret) {
+		LOG_ERROR(priv, INIT,
+			"sdio_set_block_size() failure: %d\n", ret);
+		goto error_sdio_enable;
+	}
+
+	ret = sdio_enable_func(func);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "sdio_enable_func() failure: %d\n", ret);
+		goto error_sdio_enable;
+	}
+
+	/* init reset and dev_sync states */
+	atomic_set(&priv->reset, 0);
+	atomic_set(&priv->dev_sync, 0);
+
+	/* init read req queue */
+	INIT_LIST_HEAD(&priv->read_req_list);
+
+	/* process configurable parameters */
+	iwmct_dbg_init_params(priv);
+	ret = sysfs_create_group(&func->dev.kobj, &iwmct_attribute_group);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "Failed to register attributes and "
+			 "initialize module_params\n");
+		goto error_dev_attrs;
+	}
+
+	iwmct_dbgfs_register(priv, DRV_NAME);
+
+	if (!priv->dbg.direct && priv->dbg.download_trans_blks > 8) {
+		LOG_INFO(priv, INIT,
+			 "Reducing transaction to 8 blocks = 2K (from %d)\n",
+			 priv->dbg.download_trans_blks);
+		priv->dbg.download_trans_blks = 8;
+	}
+	priv->trans_len = priv->dbg.download_trans_blks * priv->dbg.block_size;
+	LOG_INFO(priv, INIT, "Transaction length = %d\n", priv->trans_len);
+
+	ret = sdio_claim_irq(func, iwmct_irq);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "sdio_claim_irq() failure: %d\n", ret);
+		goto error_claim_irq;
+	}
+
+
+	/* Enable function's interrupt */
+	sdio_writeb(priv->func, val, addr, &ret);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "Failure writing to "
+			  "Interrupt Enable Register (%d): %d\n", addr, ret);
+		goto error_enable_int;
+	}
+
+	sdio_release_host(func);
+
+	LOG_INFO(priv, INIT, "exit iwmct_probe\n");
+
+	return ret;
+
+error_enable_int:
+	sdio_release_irq(func);
+error_claim_irq:
+	sdio_disable_func(func);
+error_dev_attrs:
+	iwmct_dbgfs_unregister(priv->dbgfs);
+	sysfs_remove_group(&func->dev.kobj, &iwmct_attribute_group);
+error_sdio_enable:
+	sdio_release_host(func);
+	return ret;
+}
+
+static void iwmct_remove(struct sdio_func *func)
+{
+	struct iwmct_work_struct *read_req;
+	struct iwmct_priv *priv = sdio_get_drvdata(func);
+
+	priv = sdio_get_drvdata(func);
+
+	LOG_INFO(priv, INIT, "enter\n");
+
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_release_host(func);
+
+	/* Safely destroy osc workqueue */
+	destroy_workqueue(priv->bus_rescan_wq);
+	destroy_workqueue(priv->wq);
+
+	sdio_claim_host(func);
+	sdio_disable_func(func);
+	sysfs_remove_group(&func->dev.kobj, &iwmct_attribute_group);
+	iwmct_dbgfs_unregister(priv->dbgfs);
+	sdio_release_host(func);
+
+	/* free read requests */
+	while (!list_empty(&priv->read_req_list)) {
+		read_req = list_entry(priv->read_req_list.next,
+			struct iwmct_work_struct, list);
+
+		list_del(&read_req->list);
+		kfree(read_req);
+	}
+
+	kfree(priv);
+}
+
+
+static const struct sdio_device_id iwmct_ids[] = {
+	/* Intel Wireless MultiCom 3200 Top Driver */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, 0x1404)},
+	{ },	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(sdio, iwmct_ids);
+
+static struct sdio_driver iwmct_driver = {
+	.probe		= iwmct_probe,
+	.remove		= iwmct_remove,
+	.name		= DRV_NAME,
+	.id_table	= iwmct_ids,
+};
+
+static int __init iwmct_init(void)
+{
+	int rc;
+
+	/* Default log filter settings */
+	iwmct_log_set_filter(LOG_SRC_ALL, LOG_SEV_FILTER_RUNTIME);
+	iwmct_log_set_filter(LOG_SRC_FW_MSG, LOG_SEV_FILTER_ALL);
+	iwmct_log_set_fw_filter(LOG_SRC_ALL, FW_LOG_SEV_FILTER_RUNTIME);
+
+	rc = sdio_register_driver(&iwmct_driver);
+
+	return rc;
+}
+
+static void __exit iwmct_exit(void)
+{
+	sdio_unregister_driver(&iwmct_driver);
+}
+
+module_init(iwmct_init);
+module_exit(iwmct_exit);
+
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index fd3688a..832ed4c 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -89,48 +89,40 @@
 
 static ctl_table xpc_sys_xpc_hb_dir[] = {
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "hb_interval",
 	 .data = &xpc_hb_interval,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec_minmax,
-	 .strategy = &sysctl_intvec,
+	 .proc_handler = proc_dointvec_minmax,
 	 .extra1 = &xpc_hb_min_interval,
 	 .extra2 = &xpc_hb_max_interval},
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "hb_check_interval",
 	 .data = &xpc_hb_check_interval,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec_minmax,
-	 .strategy = &sysctl_intvec,
+	 .proc_handler = proc_dointvec_minmax,
 	 .extra1 = &xpc_hb_check_min_interval,
 	 .extra2 = &xpc_hb_check_max_interval},
 	{}
 };
 static ctl_table xpc_sys_xpc_dir[] = {
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "hb",
 	 .mode = 0555,
 	 .child = xpc_sys_xpc_hb_dir},
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "disengage_timelimit",
 	 .data = &xpc_disengage_timelimit,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec_minmax,
-	 .strategy = &sysctl_intvec,
+	 .proc_handler = proc_dointvec_minmax,
 	 .extra1 = &xpc_disengage_min_timelimit,
 	 .extra2 = &xpc_disengage_max_timelimit},
 	{}
 };
 static ctl_table xpc_sys_dir[] = {
 	{
-	 .ctl_name = CTL_UNNUMBERED,
 	 .procname = "xpc",
 	 .mode = 0555,
 	 .child = xpc_sys_xpc_dir},
diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c
index c76677a..b5bbe59 100644
--- a/drivers/misc/sgi-xp/xpc_uv.c
+++ b/drivers/misc/sgi-xp/xpc_uv.c
@@ -106,7 +106,8 @@
 	int mmr_pnode = uv_blade_to_pnode(mq->mmr_blade);
 
 #if defined CONFIG_X86_64
-	mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset);
+	mq->irq = uv_setup_irq(irq_name, cpu, mq->mmr_blade, mq->mmr_offset,
+			UV_AFFINITY_CPU);
 	if (mq->irq < 0) {
 		dev_err(xpc_part, "uv_setup_irq() returned error=%d\n",
 			-mq->irq);
@@ -136,7 +137,7 @@
 xpc_release_gru_mq_irq_uv(struct xpc_gru_mq_uv *mq)
 {
 #if defined CONFIG_X86_64
-	uv_teardown_irq(mq->irq, mq->mmr_blade, mq->mmr_offset);
+	uv_teardown_irq(mq->irq);
 
 #elif defined CONFIG_IA64_GENERIC || defined CONFIG_IA64_SGI_UV
 	int mmr_pnode;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 705a589..90d168a 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -56,7 +56,7 @@
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == 0x80)
+		if (host->hw_designer == AMBA_VENDOR_ST)
 			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 		/* This hasn't proven to be worthwhile */
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index b8fd7af..5f970e2 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -30,12 +30,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <mach/board.h>
-#include <mach/mmc.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
 #define	OMAP_MMC_REG_CMD	0x00
 #define	OMAP_MMC_REG_ARGL	0x04
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 0aecaae..4b23225 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -30,11 +30,11 @@
 #include <linux/mmc/core.h>
 #include <linux/io.h>
 #include <linux/semaphore.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/cpu.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/cpu.h>
 
 /* OMAP HSMMC Host Controller Registers */
 #define OMAP_HSMMC_SYSCONFIG	0x0010
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index b00d673..bb47ff4 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -43,6 +43,9 @@
 #define NR_SG	1
 #define CLKRT_OFF	(~0)
 
+#define mmc_has_26MHz()		(cpu_is_pxa300() || cpu_is_pxa310() \
+				|| cpu_is_pxa935())
+
 struct pxamci_host {
 	struct mmc_host		*mmc;
 	spinlock_t		lock;
@@ -457,7 +460,7 @@
 			clk_enable(host->clk);
 
 		if (ios->clock == 26000000) {
-			/* to support 26MHz on pxa300/pxa310 */
+			/* to support 26MHz */
 			host->clkrt = 7;
 		} else {
 			/* to handle (19.5MHz, 26MHz) */
@@ -608,8 +611,7 @@
 	 * Calculate minimum clock rate, rounding up.
 	 */
 	mmc->f_min = (host->clkrate + 63) / 64;
-	mmc->f_max = (cpu_is_pxa300() || cpu_is_pxa310()) ? 26000000
-							  : host->clkrate;
+	mmc->f_max = (mmc_has_26MHz()) ? 26000000 : host->clkrate;
 
 	pxamci_init_ocr(host);
 
@@ -618,7 +620,7 @@
 	if (!cpu_is_pxa25x()) {
 		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
 		host->cmdat |= CMDAT_SDIO_INT_EN;
-		if (cpu_is_pxa300() || cpu_is_pxa310())
+		if (mmc_has_26MHz())
 			mmc->caps |= MMC_CAP_MMC_HIGHSPEED |
 				     MMC_CAP_SD_HIGHSPEED;
 	}
@@ -760,6 +762,8 @@
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		mmc_remove_host(mmc);
+
 		if (host->pdata) {
 			gpio_cd = host->pdata->gpio_card_detect;
 			gpio_ro = host->pdata->gpio_card_ro;
@@ -779,8 +783,6 @@
 		if (host->pdata && host->pdata->exit)
 			host->pdata->exit(&pdev->dev, mmc);
 
-		mmc_remove_host(mmc);
-
 		pxamci_stop_clock(host);
 		writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
 		       END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index a244781..ead0b2f 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/mach/flash.h>
-#include <mach/tc.h>
+#include <plat/tc.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 static const char *part_probes[] = { /* "RedBoot", */ "cmdlinepart", NULL };
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index d600c2d..689d6a7 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -118,11 +118,9 @@
 		DEBUG(2, "Remapping window from 0x%8.8x to 0x%8.8x",
 		      dev->offset, mrq.CardOffset);
 		mrq.Page = 0;
-		ret = pcmcia_map_mem_page(win, &mrq);
-		if (ret != 0) {
-			cs_error(dev->p_dev, MapMemPage, ret);
+		ret = pcmcia_map_mem_page(dev->p_dev, win, &mrq);
+		if (ret != 0)
 			return NULL;
-		}
 		dev->offset = mrq.CardOffset;
 	}
 	return dev->win_base + (to & (dev->win_size-1));
@@ -327,8 +325,6 @@
 
 	DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp);
 	ret = pcmcia_modify_configuration(link, &mod);
-	if (ret != 0)
-		cs_error(link, ModifyConfiguration, ret);
 }
 
 
@@ -348,107 +344,116 @@
 			iounmap(dev->win_base);
 			dev->win_base = NULL;
 		}
-		pcmcia_release_window(link->win);
+		pcmcia_release_window(link, link->win);
 	}
 	pcmcia_disable_device(link);
 }
 
 
+#ifdef CONFIG_MTD_DEBUG
+static int pcmciamtd_cistpl_format(struct pcmcia_device *p_dev,
+				tuple_t *tuple,
+				void *priv_data)
+{
+	cisparse_t parse;
+
+	if (!pcmcia_parse_tuple(tuple, &parse)) {
+		cistpl_format_t *t = &parse.format;
+		(void)t; /* Shut up, gcc */
+		DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
+			t->type, t->edc, t->offset, t->length);
+	}
+	return -ENOSPC;
+}
+
+static int pcmciamtd_cistpl_jedec(struct pcmcia_device *p_dev,
+				tuple_t *tuple,
+				void *priv_data)
+{
+	cisparse_t parse;
+	int i;
+
+	if (!pcmcia_parse_tuple(tuple, &parse)) {
+		cistpl_jedec_t *t = &parse.jedec;
+		for (i = 0; i < t->nid; i++)
+			DEBUG(2, "JEDEC: 0x%02x 0x%02x", t->id[i].mfr, t->id[i].info);
+	}
+	return -ENOSPC;
+}
+#endif
+
+static int pcmciamtd_cistpl_device(struct pcmcia_device *p_dev,
+				tuple_t *tuple,
+				void *priv_data)
+{
+	struct pcmciamtd_dev *dev = priv_data;
+	cisparse_t parse;
+	cistpl_device_t *t = &parse.device;
+	int i;
+
+	if (pcmcia_parse_tuple(tuple, &parse))
+		return -EINVAL;
+
+	DEBUG(2, "Common memory:");
+	dev->pcmcia_map.size = t->dev[0].size;
+	/* from here on: DEBUG only */
+	for (i = 0; i < t->ndev; i++) {
+		DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
+		DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
+		DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
+		DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
+	}
+	return 0;
+}
+
+static int pcmciamtd_cistpl_geo(struct pcmcia_device *p_dev,
+				tuple_t *tuple,
+				void *priv_data)
+{
+	struct pcmciamtd_dev *dev = priv_data;
+	cisparse_t parse;
+	cistpl_device_geo_t *t = &parse.device_geo;
+	int i;
+
+	if (pcmcia_parse_tuple(tuple, &parse))
+		return -EINVAL;
+
+	dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
+	/* from here on: DEBUG only */
+	for (i = 0; i < t->ngeo; i++) {
+		DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
+		DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
+		DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
+		DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
+		DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
+		DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
+	}
+	return 0;
+}
+
+
 static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *link, int *new_name)
 {
-	int rc;
-	tuple_t tuple;
-	cisparse_t parse;
-	u_char buf[64];
+	int i;
 
-	tuple.Attributes = 0;
-	tuple.TupleData = (cisdata_t *)buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	tuple.DesiredTuple = RETURN_FIRST_TUPLE;
-
-	rc = pcmcia_get_first_tuple(link, &tuple);
-	while (rc == 0) {
-		rc = pcmcia_get_tuple_data(link, &tuple);
-		if (rc != 0) {
-			cs_error(link, GetTupleData, rc);
-			break;
+	if (p_dev->prod_id[0]) {
+		dev->mtd_name[0] = '\0';
+		for (i = 0; i < 4; i++) {
+			if (i)
+				strcat(dev->mtd_name, " ");
+			if (p_dev->prod_id[i])
+				strcat(dev->mtd_name, p_dev->prod_id[i]);
 		}
-		rc = pcmcia_parse_tuple(&tuple, &parse);
-		if (rc != 0) {
-			cs_error(link, ParseTuple, rc);
-			break;
-		}
-
-		switch(tuple.TupleCode) {
-		case  CISTPL_FORMAT: {
-			cistpl_format_t *t = &parse.format;
-			(void)t; /* Shut up, gcc */
-			DEBUG(2, "Format type: %u, Error Detection: %u, offset = %u, length =%u",
-			      t->type, t->edc, t->offset, t->length);
-			break;
-
-		}
-
-		case CISTPL_DEVICE: {
-			cistpl_device_t *t = &parse.device;
-			int i;
-			DEBUG(2, "Common memory:");
-			dev->pcmcia_map.size = t->dev[0].size;
-			for(i = 0; i < t->ndev; i++) {
-				DEBUG(2, "Region %d, type = %u", i, t->dev[i].type);
-				DEBUG(2, "Region %d, wp = %u", i, t->dev[i].wp);
-				DEBUG(2, "Region %d, speed = %u ns", i, t->dev[i].speed);
-				DEBUG(2, "Region %d, size = %u bytes", i, t->dev[i].size);
-			}
-			break;
-		}
-
-		case CISTPL_VERS_1: {
-			cistpl_vers_1_t *t = &parse.version_1;
-			int i;
-			if(t->ns) {
-				dev->mtd_name[0] = '\0';
-				for(i = 0; i < t->ns; i++) {
-					if(i)
-						strcat(dev->mtd_name, " ");
-					strcat(dev->mtd_name, t->str+t->ofs[i]);
-				}
-			}
-			DEBUG(2, "Found name: %s", dev->mtd_name);
-			break;
-		}
-
-		case CISTPL_JEDEC_C: {
-			cistpl_jedec_t *t = &parse.jedec;
-			int i;
-			for(i = 0; i < t->nid; i++) {
-				DEBUG(2, "JEDEC: 0x%02x 0x%02x", t->id[i].mfr, t->id[i].info);
-			}
-			break;
-		}
-
-		case CISTPL_DEVICE_GEO: {
-			cistpl_device_geo_t *t = &parse.device_geo;
-			int i;
-			dev->pcmcia_map.bankwidth = t->geo[0].buswidth;
-			for(i = 0; i < t->ngeo; i++) {
-				DEBUG(2, "region: %d bankwidth = %u", i, t->geo[i].buswidth);
-				DEBUG(2, "region: %d erase_block = %u", i, t->geo[i].erase_block);
-				DEBUG(2, "region: %d read_block = %u", i, t->geo[i].read_block);
-				DEBUG(2, "region: %d write_block = %u", i, t->geo[i].write_block);
-				DEBUG(2, "region: %d partition = %u", i, t->geo[i].partition);
-				DEBUG(2, "region: %d interleave = %u", i, t->geo[i].interleave);
-			}
-			break;
-		}
-
-		default:
-			DEBUG(2, "Unknown tuple code %d", tuple.TupleCode);
-		}
-
-		rc = pcmcia_get_next_tuple(link, &tuple);
+		DEBUG(2, "Found name: %s", dev->mtd_name);
 	}
+
+#ifdef CONFIG_MTD_DEBUG
+	pcmcia_loop_tuple(p_dev, CISTPL_FORMAT, pcmciamtd_cistpl_format, NULL);
+	pcmcia_loop_tuple(p_dev, CISTPL_JEDEC_C, pcmciamtd_cistpl_jedec, NULL);
+#endif
+	pcmcia_loop_tuple(p_dev, CISTPL_DEVICE, pcmciamtd_cistpl_device, dev);
+	pcmcia_loop_tuple(p_dev, CISTPL_DEVICE_GEO, pcmciamtd_cistpl_geo, dev);
+
 	if(!dev->pcmcia_map.size)
 		dev->pcmcia_map.size = MAX_PCMCIA_ADDR;
 
@@ -481,16 +486,12 @@
  * MTD device available to the system.
  */
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int pcmciamtd_config(struct pcmcia_device *link)
 {
 	struct pcmciamtd_dev *dev = link->priv;
 	struct mtd_info *mtd = NULL;
 	cs_status_t status;
 	win_req_t req;
-	int last_ret = 0, last_fn = 0;
 	int ret;
 	int i;
 	static char *probes[] = { "jedec_probe", "cfi_probe" };
@@ -529,7 +530,7 @@
 		int ret;
 		DEBUG(2, "requesting window with size = %dKiB memspeed = %d",
 		      req.Size >> 10, req.AccessSpeed);
-		ret = pcmcia_request_window(&link, &req, &link->win);
+		ret = pcmcia_request_window(link, &req, &link->win);
 		DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size);
 		if(ret) {
 			req.Size >>= 1;
@@ -577,7 +578,6 @@
 	DEBUG(2, "Setting Configuration");
 	ret = pcmcia_request_configuration(link, &link->conf);
 	if (ret != 0) {
-		cs_error(link, RequestConfiguration, ret);
 		if (dev->win_base) {
 			iounmap(dev->win_base);
 			dev->win_base = NULL;
@@ -652,8 +652,7 @@
 	link->dev_node = &dev->node;
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
+ failed:
 	err("CS Error, exiting");
 	pcmciamtd_release(link);
 	return -ENODEV;
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 8ca17a3..64e2b37 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -59,12 +59,14 @@
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
 			if (tr->readsect(dev, block, buf))
 				return -EIO;
+		rq_flush_dcache_pages(req);
 		return 0;
 
 	case WRITE:
 		if (!tr->writesect)
 			return -EIO;
 
+		rq_flush_dcache_pages(req);
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
 			if (tr->writesect(dev, block, buf))
 				return -EIO;
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2fda0b6..8f8e87b 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -358,7 +358,7 @@
 
 config MTD_NAND_PXA3xx
 	tristate "Support for NAND flash devices on PXA3xx"
-	depends on MTD_NAND && PXA3xx
+	depends on MTD_NAND && (PXA3xx || ARCH_MMP)
 	help
 	  This enables the driver for the NAND flash device found on
 	  PXA3xx processors
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 005b91f..2548e10 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -25,7 +25,7 @@
 #include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <mach/gpio.h>
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 
 /*
  * MTD structure for E3 (Delta)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 090ab87..1bb799f 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -18,9 +18,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/nand.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
 
 #define GPMC_IRQ_STATUS		0x18
 #define GPMC_ECC_CONFIG		0x1F4
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 6ea520a..1a5a036 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -22,7 +23,7 @@
 #include <linux/irq.h>
 
 #include <mach/dma.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #define	CHIP_DELAY_TIMEOUT	(2 * HZ/10)
 
@@ -84,10 +85,6 @@
 #define NDCB0_CMD1_MASK		(0xff)
 #define NDCB0_ADDR_CYC_SHIFT	(16)
 
-/* dma-able I/O address for the NAND data and commands */
-#define NDCB0_DMA_ADDR		(0x43100048)
-#define NDDB_DMA_ADDR		(0x43100040)
-
 /* macros for registers read/write */
 #define nand_writel(info, off, val)	\
 	__raw_writel((val), (info)->mmio_base + (off))
@@ -123,6 +120,7 @@
 
 	struct clk		*clk;
 	void __iomem		*mmio_base;
+	unsigned long		mmio_phys;
 
 	unsigned int 		buf_start;
 	unsigned int		buf_count;
@@ -228,13 +226,35 @@
 	.chip_id	= 0x46ec,
 };
 
+static struct pxa3xx_nand_flash samsung2GbX8 = {
+	.timing		= &samsung512MbX16_timing,
+	.cmdset		= &smallpage_cmdset,
+	.page_per_block	= 64,
+	.page_size	= 2048,
+	.flash_width	= 8,
+	.dfc_width	= 8,
+	.num_blocks	= 2048,
+	.chip_id	= 0xdaec,
+};
+
+static struct pxa3xx_nand_flash samsung32GbX8 = {
+	.timing		= &samsung512MbX16_timing,
+	.cmdset		= &smallpage_cmdset,
+	.page_per_block	= 128,
+	.page_size	= 4096,
+	.flash_width	= 8,
+	.dfc_width	= 8,
+	.num_blocks	= 8192,
+	.chip_id	= 0xd7ec,
+};
+
 static struct pxa3xx_nand_timing micron_timing = {
 	.tCH	= 10,
 	.tCS	= 25,
 	.tWH	= 15,
 	.tWP	= 25,
 	.tRH	= 15,
-	.tRP	= 25,
+	.tRP	= 30,
 	.tR	= 25000,
 	.tWHR	= 60,
 	.tAR	= 10,
@@ -262,6 +282,28 @@
 	.chip_id	= 0xb12c,
 };
 
+static struct pxa3xx_nand_flash micron4GbX8 = {
+	.timing		= &micron_timing,
+	.cmdset		= &largepage_cmdset,
+	.page_per_block	= 64,
+	.page_size	= 2048,
+	.flash_width	= 8,
+	.dfc_width	= 8,
+	.num_blocks	= 4096,
+	.chip_id	= 0xdc2c,
+};
+
+static struct pxa3xx_nand_flash micron4GbX16 = {
+	.timing		= &micron_timing,
+	.cmdset		= &largepage_cmdset,
+	.page_per_block	= 64,
+	.page_size	= 2048,
+	.flash_width	= 16,
+	.dfc_width	= 16,
+	.num_blocks	= 4096,
+	.chip_id	= 0xcc2c,
+};
+
 static struct pxa3xx_nand_timing stm2GbX16_timing = {
 	.tCH = 10,
 	.tCS = 35,
@@ -287,8 +329,12 @@
 
 static struct pxa3xx_nand_flash *builtin_flash_types[] = {
 	&samsung512MbX16,
+	&samsung2GbX8,
+	&samsung32GbX8,
 	&micron1GbX8,
 	&micron1GbX16,
+	&micron4GbX8,
+	&micron4GbX16,
 	&stm2GbX16,
 };
 #endif /* CONFIG_MTD_NAND_PXA3xx_BUILTIN */
@@ -489,7 +535,7 @@
 	switch (info->state) {
 	case STATE_PIO_WRITING:
 		__raw_writesl(info->mmio_base + NDDB, info->data_buff,
-				info->data_size << 2);
+				DIV_ROUND_UP(info->data_size, 4));
 
 		enable_int(info, NDSR_CS0_BBD | NDSR_CS0_CMDD);
 
@@ -501,7 +547,7 @@
 		break;
 	case STATE_PIO_READING:
 		__raw_readsl(info->mmio_base + NDDB, info->data_buff,
-				info->data_size << 2);
+				DIV_ROUND_UP(info->data_size, 4));
 		break;
 	default:
 		printk(KERN_ERR "%s: invalid state %d\n", __func__,
@@ -523,11 +569,11 @@
 
 	if (dir_out) {
 		desc->dsadr = info->data_buff_phys;
-		desc->dtadr = NDDB_DMA_ADDR;
+		desc->dtadr = info->mmio_phys + NDDB;
 		desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
 	} else {
 		desc->dtadr = info->data_buff_phys;
-		desc->dsadr = NDDB_DMA_ADDR;
+		desc->dsadr = info->mmio_phys + NDDB;
 		desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
 	}
 
@@ -669,6 +715,7 @@
 		/* disable HW ECC to get all the OOB data */
 		info->buf_count = mtd->writesize + mtd->oobsize;
 		info->buf_start = mtd->writesize + column;
+		memset(info->data_buff, 0xFF, info->buf_count);
 
 		if (prepare_read_prog_cmd(info, cmdset->read1, column, page_addr))
 			break;
@@ -1239,13 +1286,17 @@
 		ret = -ENODEV;
 		goto fail_free_res;
 	}
+	info->mmio_phys = r->start;
 
 	ret = pxa3xx_nand_init_buff(info);
 	if (ret)
 		goto fail_free_io;
 
-	ret = request_irq(IRQ_NAND, pxa3xx_nand_irq, IRQF_DISABLED,
-				pdev->name, info);
+	/* initialize all interrupts to be disabled */
+	disable_int(info, NDSR_MASK);
+
+	ret = request_irq(irq, pxa3xx_nand_irq, IRQF_DISABLED,
+			  pdev->name, info);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
 		goto fail_free_buf;
@@ -1271,7 +1322,7 @@
 	return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
 
 fail_free_irq:
-	free_irq(IRQ_NAND, info);
+	free_irq(irq, info);
 fail_free_buf:
 	if (use_dma) {
 		pxa_free_dma(info->data_dma_ch);
@@ -1296,12 +1347,15 @@
 	struct mtd_info *mtd = platform_get_drvdata(pdev);
 	struct pxa3xx_nand_info *info = mtd->priv;
 	struct resource *r;
+	int irq;
 
 	platform_set_drvdata(pdev, NULL);
 
 	del_mtd_device(mtd);
 	del_mtd_partitions(mtd);
-	free_irq(IRQ_NAND, info);
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, info);
 	if (use_dma) {
 		pxa_free_dma(info->data_dma_ch);
 		dma_free_writecombine(&pdev->dev, info->data_buff_size,
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 0108ed4..86c4f6dc 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -36,13 +36,13 @@
 #include <linux/io.h>
 
 #include <asm/mach/flash.h>
-#include <mach/gpmc.h>
-#include <mach/onenand.h>
+#include <plat/gpmc.h>
+#include <plat/onenand.h>
 #include <mach/gpio.h>
 
-#include <mach/dma.h>
+#include <plat/dma.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 
 #define DRIVER_NAME "omap2-onenand"
 
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index f603091..4d4cad3 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -249,11 +249,11 @@
 	 *	for the Sager NP943 prefix.
 	 */
 
-	if (station_addr[0] == 0x02  &&  station_addr[1] == 0x60
-						&& station_addr[2] == 0x8c)
+	if (station_addr[0] == 0x02 && station_addr[1] == 0x60 &&
+	    station_addr[2] == 0x8c)
 		mname = "3c501";
-	else if (station_addr[0] == 0x00  &&  station_addr[1] == 0x80
-						&& station_addr[2] == 0xC8)
+	else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 &&
+		 station_addr[2] == 0xC8)
 		mname = "NP943";
 	else {
 		release_region(ioaddr, EL1_IO_EXTENT);
@@ -345,7 +345,7 @@
 	if (el_debug > 2)
 		pr_debug("%s: Doing el_open()...\n", dev->name);
 
-	retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);
+	retval = request_irq(dev->irq, el_interrupt, 0, dev->name, dev);
 	if (retval)
 		return retval;
 
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index c71e12d..66e0323 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -214,8 +214,8 @@
     iobase_reg = inb(ioaddr+0x403);
     membase_reg = inb(ioaddr+0x404);
     /* ASIC location registers should be 0 or have only a single bit set. */
-    if (   (iobase_reg  & (iobase_reg - 1))
-	|| (membase_reg & (membase_reg - 1))) {
+    if ((iobase_reg  & (iobase_reg - 1)) ||
+	(membase_reg & (membase_reg - 1))) {
 	retval = -ENODEV;
 	goto out1;
     }
@@ -291,8 +291,8 @@
 	    writel(0xba5eba5e, mem_base);
 	    for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) {
 		writel(test_val, mem_base + i);
-		if (readl(mem_base) != 0xba5eba5e
-		    || readl(mem_base + i) != test_val) {
+		if (readl(mem_base) != 0xba5eba5e ||
+		    readl(mem_base + i) != test_val) {
 		    pr_warning("3c503: memory failure or memory address conflict.\n");
 		    dev->mem_start = 0;
 		    ei_status.name = "3c503-PIO";
@@ -397,9 +397,10 @@
 		unsigned long cookie = probe_irq_on();
 		outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR);
 		outb_p(0x00, E33G_IDCFR);
-		if (*irqp == probe_irq_off(cookie)	/* It's a good IRQ line! */
-		    && ((retval = request_irq(dev->irq = *irqp,
-		    eip_interrupt, 0, dev->name, dev)) == 0))
+		if (*irqp == probe_irq_off(cookie) &&	/* It's a good IRQ line! */
+		    ((retval = request_irq(dev->irq = *irqp,
+					   eip_interrupt, 0,
+					   dev->name, dev)) == 0))
 		    break;
 	    } else {
 		    if (retval != -EBUSY)
diff --git a/drivers/net/3c505.c b/drivers/net/3c505.c
index a21c9d1..9257d7c 100644
--- a/drivers/net/3c505.c
+++ b/drivers/net/3c505.c
@@ -886,7 +886,7 @@
 	/*
 	 * install our interrupt service routine
 	 */
-	if ((retval = request_irq(dev->irq, &elp_interrupt, 0, dev->name, dev))) {
+	if ((retval = request_irq(dev->irq, elp_interrupt, 0, dev->name, dev))) {
 		pr_err("%s: could not allocate IRQ%d\n", dev->name, dev->irq);
 		return retval;
 	}
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c
index a6dc8bc..fbc2311 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/3c507.c
@@ -399,7 +399,7 @@
 
 	irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;
 
-	irqval = request_irq(irq, &el16_interrupt, 0, DRV_NAME, dev);
+	irqval = request_irq(irq, el16_interrupt, 0, DRV_NAME, dev);
 	if (irqval) {
 		pr_cont("\n");
 		pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);
@@ -836,8 +836,8 @@
 		void __iomem *data_frame = lp->base + data_buffer_addr;
 		ushort pkt_len = readw(data_frame);
 
-		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
-			|| (pkt_len & 0xC000) != 0xC000) {
+		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22 ||
+		    (pkt_len & 0xC000) != 0xC000) {
 			pr_err("%s: Rx frame at %#x corrupted, "
 			       "status %04x cmd %04x next %04x "
 			       "data-buf @%04x %04x.\n",
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index 3b00a4e..9d85efc 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -253,9 +253,9 @@
 		   This check is needed in order not to register them twice. */
 		for (i = 0; i < el3_cards; i++) {
 			struct el3_private *lp = netdev_priv(el3_devs[i]);
-			if (lp->type == EL3_PNP
-			    && !memcmp(phys_addr, el3_devs[i]->dev_addr,
-				       ETH_ALEN)) {
+			if (lp->type == EL3_PNP &&
+			    !memcmp(phys_addr, el3_devs[i]->dev_addr,
+				    ETH_ALEN)) {
 				if (el3_debug > 3)
 					pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
 						phys_addr[0] & 0xff, phys_addr[0] >> 8,
@@ -780,7 +780,7 @@
 	outw(RxReset, ioaddr + EL3_CMD);
 	outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
 
-	i = request_irq(dev->irq, &el3_interrupt, 0, dev->name, dev);
+	i = request_irq(dev->irq, el3_interrupt, 0, dev->name, dev);
 	if (i)
 		return i;
 
@@ -835,8 +835,8 @@
 #ifndef final_version
 	{	/* Error-checking code, delete someday. */
 		ushort status = inw(ioaddr + EL3_STATUS);
-		if (status & 0x0001 		/* IRQ line active, missed one. */
-			&& inw(ioaddr + EL3_STATUS) & 1) { 			/* Make sure. */
+		if (status & 0x0001 && 		/* IRQ line active, missed one. */
+		    inw(ioaddr + EL3_STATUS) & 1) { 			/* Make sure. */
 			pr_debug("%s: Missed interrupt, status then %04x now %04x"
 				   "  Tx %2.2x Rx %4.4x.\n", dev->name, status,
 				   inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 4adcb950..063b049 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -764,13 +764,14 @@
 	/* Use the now-standard shared IRQ implementation. */
 	if (vp->capabilities == 0x11c7) {
 		/* Corkscrew: Cannot share ISA resources. */
-		if (dev->irq == 0
-		    || dev->dma == 0
-		    || request_irq(dev->irq, &corkscrew_interrupt, 0,
-				   vp->product_name, dev)) return -EAGAIN;
+		if (dev->irq == 0 ||
+		    dev->dma == 0 ||
+		    request_irq(dev->irq, corkscrew_interrupt, 0,
+				vp->product_name, dev))
+			return -EAGAIN;
 		enable_dma(dev->dma);
 		set_dma_mode(dev->dma, DMA_MODE_CASCADE);
-	} else if (request_irq(dev->irq, &corkscrew_interrupt, IRQF_SHARED,
+	} else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED,
 			       vp->product_name, dev)) {
 		return -EAGAIN;
 	}
@@ -1368,8 +1369,8 @@
 
 			/* Check if the packet is long enough to just accept without
 			   copying to a properly sized skbuff. */
-			if (pkt_len < rx_copybreak
-			    && (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
 				skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
 				/* 'skb_put()' points to the start of sk_buff data area. */
 				memcpy(skb_put(skb, pkt_len),
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index cb0b7307..27d80ca 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -288,7 +288,7 @@
 
 	elmc_id_attn586();	/* disable interrupts */
 
-	ret = request_irq(dev->irq, &elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+	ret = request_irq(dev->irq, elmc_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM,
 			  dev->name, dev);
 	if (ret) {
 		pr_err("%s: couldn't get irq %d\n", dev->name, dev->irq);
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 6021e6d..36c4191 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -443,7 +443,7 @@
 	 *	Grab the IRQ
 	 */
 
-	err = request_irq(dev->irq, &mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
+	err = request_irq(dev->irq, mc32_interrupt, IRQF_SHARED | IRQF_SAMPLE_RANDOM, DRV_NAME, dev);
 	if (err) {
 		release_region(dev->base_addr, MC32_IO_EXTENT);
 		pr_err("%s: unable to get IRQ %d.\n", DRV_NAME, dev->irq);
@@ -1168,8 +1168,8 @@
 
 			/* Try to save time by avoiding a copy on big frames */
 
-			if ((length > RX_COPYBREAK)
-			    && ((newskb=dev_alloc_skb(1532)) != NULL))
+			if ((length > RX_COPYBREAK) &&
+			    ((newskb=dev_alloc_skb(1532)) != NULL))
 			{
 				skb=lp->rx_ring[rx_ring_tail].skb;
 				skb_put(skb, length);
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 975e25b..78b7167 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -1942,8 +1942,8 @@
 	if (status & TxComplete) {			/* Really "TxError" for us. */
 		tx_status = ioread8(ioaddr + TxStatus);
 		/* Presumably a tx-timeout. We must merely re-enable. */
-		if (vortex_debug > 2
-			|| (tx_status != 0x88 && vortex_debug > 0)) {
+		if (vortex_debug > 2 ||
+		    (tx_status != 0x88 && vortex_debug > 0)) {
 			pr_err("%s: Transmit error, Tx status register %2.2x.\n",
 				   dev->name, tx_status);
 			if (tx_status == 0x82) {
@@ -2560,7 +2560,7 @@
 		struct sk_buff *skb;
 		entry = vp->dirty_rx % RX_RING_SIZE;
 		if (vp->rx_skbuff[entry] == NULL) {
-			skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
@@ -2572,7 +2572,6 @@
 				break;			/* Bad news!  */
 			}
 
-			skb_reserve(skb, NET_IP_ALIGN);
 			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 83a1922..3f452bc 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -549,14 +549,12 @@
 			pr_debug("%s: rx slot %d status 0x%x len %d\n",
 			       dev->name, rx_tail, status, len);
 
-		new_skb = netdev_alloc_skb(dev, buflen + NET_IP_ALIGN);
+		new_skb = netdev_alloc_skb_ip_align(dev, buflen);
 		if (!new_skb) {
 			dev->stats.rx_dropped++;
 			goto rx_next;
 		}
 
-		skb_reserve(new_skb, NET_IP_ALIGN);
-
 		dma_unmap_single(&cp->pdev->dev, mapping,
 				 buflen, PCI_DMA_FROMDEVICE);
 
@@ -911,8 +909,8 @@
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
@@ -1057,12 +1055,10 @@
 		struct sk_buff *skb;
 		dma_addr_t mapping;
 
-		skb = netdev_alloc_skb(dev, cp->rx_buf_sz + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, cp->rx_buf_sz);
 		if (!skb)
 			goto err_out;
 
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		mapping = dma_map_single(&cp->pdev->dev, skb->data,
 					 cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
 		cp->rx_skb[i] = skb;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 4a36287..25f7339 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1549,8 +1549,8 @@
 	mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
 
 	if (!tp->mii.force_media && mii_lpa != 0xffff) {
-		int duplex = (mii_lpa & LPA_100FULL)
-		    || (mii_lpa & 0x01C0) == 0x0040;
+		int duplex = ((mii_lpa & LPA_100FULL) ||
+			      (mii_lpa & 0x01C0) == 0x0040);
 		if (tp->mii.full_duplex != duplex) {
 			tp->mii.full_duplex = duplex;
 
@@ -1936,8 +1936,8 @@
 		 RTL_R16 (RxBufAddr),
 		 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
 
-	while (netif_running(dev) && received < budget
-	       && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+	while (netif_running(dev) && received < budget &&
+	       (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
 		u32 ring_offset = cur_rx % RX_BUF_LEN;
 		u32 rx_status;
 		unsigned int pkt_size;
@@ -2004,9 +2004,8 @@
 		/* Malloc up new buffer, compatible with net-2e. */
 		/* Omit the four octet CRC from the length. */
 
-		skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
 		if (likely(skb)) {
-			skb_reserve (skb, NET_IP_ALIGN);	/* 16 byte align the IP fields. */
 #if RX_BUF_IDX == 3
 			wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
 #else
@@ -2522,8 +2521,8 @@
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e19ca4b..0bbd5ae 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -975,7 +975,7 @@
 
 config ETHOC
 	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
-	depends on NET_ETHERNET && HAS_IOMEM
+	depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA
 	select MII
 	select PHYLIB
 	select CRC32
@@ -1001,7 +1001,7 @@
 
 config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH || BLACKFIN
+	depends on ARM || SUPERH || BLACKFIN || MIPS
 	select CRC32
 	select MII
 	select PHYLIB
@@ -3235,7 +3235,7 @@
 
 config VMXNET3
        tristate "VMware VMXNET3 ethernet driver"
-       depends on PCI && X86 && INET
+       depends on PCI && INET
        help
          This driver supports VMware's vmxnet3 virtual ethernet NIC.
          To compile this driver as a module, choose M here: the
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index b5dc7f5..50cecf4 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -328,7 +328,7 @@
 
 	/* Reserve any actual interrupt. */
 	if (dev->irq) {
-		retval = request_irq(dev->irq, &cops_interrupt, 0, dev->name, dev);
+		retval = request_irq(dev->irq, cops_interrupt, 0, dev->name, dev);
 		if (retval)
 			goto err_out;
 	}
diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c
index aaf14d3..eb0448b 100644
--- a/drivers/net/appletalk/ipddp.c
+++ b/drivers/net/appletalk/ipddp.c
@@ -230,9 +230,9 @@
 	spin_lock_bh(&ipddp_route_lock);
         while((tmp = *r) != NULL)
         {
-                if(tmp->ip == rt->ip
-                        && tmp->at.s_net == rt->at.s_net
-                        && tmp->at.s_node == rt->at.s_node)
+                if(tmp->ip == rt->ip &&
+		   tmp->at.s_net == rt->at.s_net &&
+		   tmp->at.s_node == rt->at.s_node)
                 {
                         *r = tmp->next;
 			spin_unlock_bh(&ipddp_route_lock);
@@ -255,9 +255,9 @@
 
         for(f = ipddp_route_list; f != NULL; f = f->next)
         {
-                if(f->ip == rt->ip
-                        && f->at.s_net == rt->at.s_net
-                        && f->at.s_node == rt->at.s_node)
+                if(f->ip == rt->ip &&
+		   f->at.s_net == rt->at.s_net &&
+		   f->at.s_node == rt->at.s_node)
                         return (f);
         }
 
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 08760ba..dbfbd3b 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1158,7 +1158,7 @@
 	}
 
 	/* grab it and don't let go :-) */
-	if (irq && request_irq( irq, &ltpc_interrupt, 0, "ltpc", dev) >= 0)
+	if (irq && request_irq( irq, ltpc_interrupt, 0, "ltpc", dev) >= 0)
 	{
 		(void) inb_p(io+7);  /* enable interrupts from board */
 		(void) inb_p(io+7);  /* and reset irq line */
diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c
index e3082a9..e6afab2 100644
--- a/drivers/net/arcnet/arc-rimi.c
+++ b/drivers/net/arcnet/arc-rimi.c
@@ -156,7 +156,7 @@
 	}
 
 	/* reserve the irq */
-	if (request_irq(dev->irq, &arcnet_interrupt, 0, "arcnet (RIM I)", dev)) {
+	if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (RIM I)", dev)) {
 		iounmap(p);
 		release_mem_region(dev->mem_start, MIRROR_SIZE);
 		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
@@ -174,9 +174,9 @@
 	 * 2k (or there are no mirrors at all) but on some, it's 4k.
 	 */
 	mirror_size = MIRROR_SIZE;
-	if (readb(p) == TESTvalue
-	    && check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0
-	    && check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
+	if (readb(p) == TESTvalue &&
+	    check_mirror(shmem - MIRROR_SIZE, MIRROR_SIZE) == 0 &&
+	    check_mirror(shmem - 2 * MIRROR_SIZE, MIRROR_SIZE) == 1)
 		mirror_size = 2 * MIRROR_SIZE;
 
 	first_mirror = shmem - mirror_size;
diff --git a/drivers/net/arcnet/arcnet.c b/drivers/net/arcnet/arcnet.c
index 75a5725..d8f0293 100644
--- a/drivers/net/arcnet/arcnet.c
+++ b/drivers/net/arcnet/arcnet.c
@@ -301,8 +301,8 @@
 
 	/* choose the smallest MTU of all available encaps */
 	for (count = 0; count < 256; count++) {
-		if (arc_proto_map[count] != &arc_proto_null
-		    && arc_proto_map[count]->mtu < mtu) {
+		if (arc_proto_map[count] != &arc_proto_null &&
+		    arc_proto_map[count]->mtu < mtu) {
 			mtu = arc_proto_map[count]->mtu;
 		}
 	}
@@ -953,13 +953,13 @@
 				 *    > RECON_THRESHOLD/min;
 				 * then print a warning message.
 				 */
-				if (!lp->network_down
-				    && (lp->last_recon - lp->first_recon) <= HZ * 60
-				  && lp->num_recons >= RECON_THRESHOLD) {
+				if (!lp->network_down &&
+				    (lp->last_recon - lp->first_recon) <= HZ * 60 &&
+				    lp->num_recons >= RECON_THRESHOLD) {
 					lp->network_down = 1;
 					BUGMSG(D_NORMAL, "many reconfigurations detected: cabling problem?\n");
-				} else if (!lp->network_down
-					   && lp->last_recon - lp->first_recon > HZ * 60) {
+				} else if (!lp->network_down &&
+					   lp->last_recon - lp->first_recon > HZ * 60) {
 					/* reset counters if we've gone for over a minute. */
 					lp->first_recon = lp->last_recon;
 					lp->num_recons = 1;
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 651275a..0a74f21 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -200,7 +200,7 @@
 	outb(dev->dev_addr[0], _XREG);
 
 	/* reserve the irq */
-	if (request_irq(dev->irq, &arcnet_interrupt, shared,
+	if (request_irq(dev->irq, arcnet_interrupt, shared,
 			"arcnet (COM20020)", dev)) {
 		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
 		return -ENODEV;
diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index 89de29b..28dea51 100644
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -238,7 +238,7 @@
 	int err;
 
 	/* Reserve the irq */
-	if (request_irq(dev->irq, &arcnet_interrupt, 0, "arcnet (COM90xx-IO)", dev)) {
+	if (request_irq(dev->irq, arcnet_interrupt, 0, "arcnet (COM90xx-IO)", dev)) {
 		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", dev->irq);
 		return -ENODEV;
 	}
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index d762fe4..112e230 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -501,7 +501,7 @@
 		goto err_free_dev;
 
 	/* reserve the irq */
-	if (request_irq(airq, &arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
+	if (request_irq(airq, arcnet_interrupt, 0, "arcnet (90xx)", dev)) {
 		BUGMSG(D_NORMAL, "Can't get IRQ %d!\n", airq);
 		goto err_release_mem;
 	}
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
index 2be49c8..b25467a 100644
--- a/drivers/net/arm/ep93xx_eth.c
+++ b/drivers/net/arm/ep93xx_eth.c
@@ -628,15 +628,6 @@
 	if (ep93xx_alloc_buffers(ep))
 		return -ENOMEM;
 
-	if (is_zero_ether_addr(dev->dev_addr)) {
-		random_ether_addr(dev->dev_addr);
-		printk(KERN_INFO "%s: generated random MAC address "
-			"%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name,
-			dev->dev_addr[0], dev->dev_addr[1],
-			dev->dev_addr[2], dev->dev_addr[3],
-			dev->dev_addr[4], dev->dev_addr[5]);
-	}
-
 	napi_enable(&ep->napi);
 
 	if (ep93xx_start_hw(dev)) {
@@ -877,6 +868,9 @@
 	ep->mii.mdio_write = ep93xx_mdio_write;
 	ep->mdc_divisor = 40;	/* Max HCLK 100 MHz, min MDIO clk 2.5 MHz.  */
 
+	if (is_zero_ether_addr(dev->dev_addr))
+		random_ether_addr(dev->dev_addr);
+
 	err = register_netdev(dev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to register netdev\n");
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 2a7b774..be256b3 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -35,11 +35,13 @@
 
 #include <mach/regs-switch.h>
 #include <mach/regs-misc.h>
+#include <asm/mach/irq.h>
+#include <mach/regs-irq.h>
 
 #include "ks8695net.h"
 
 #define MODULENAME	"ks8695_ether"
-#define MODULEVERSION	"1.01"
+#define MODULEVERSION	"1.02"
 
 /*
  * Transmit and device reset timeout, default 5 seconds.
@@ -95,6 +97,9 @@
 #define MAX_RX_DESC 16
 #define MAX_RX_DESC_MASK 0xf
 
+/*napi_weight have better more than rx DMA buffers*/
+#define NAPI_WEIGHT   64
+
 #define MAX_RXBUF_SIZE 0x700
 
 #define TX_RING_DMA_SIZE (sizeof(struct tx_ring_desc) * MAX_TX_DESC)
@@ -120,6 +125,7 @@
  *	@dev: The platform device object for this interface
  *	@dtype: The type of this device
  *	@io_regs: The ioremapped registers for this interface
+ *      @napi : Add support NAPI for Rx
  *	@rx_irq_name: The textual name of the RX IRQ from the platform data
  *	@tx_irq_name: The textual name of the TX IRQ from the platform data
  *	@link_irq_name: The textual name of the link IRQ from the
@@ -143,6 +149,7 @@
  *	@rx_ring_dma: The DMA mapped equivalent of rx_ring
  *	@rx_buffers: The sk_buff mappings for the RX ring
  *	@next_rx_desc_read: The next RX descriptor to read from on IRQ
+ *      @rx_lock: A lock to protect Rx irq function
  *	@msg_enable: The flags for which messages to emit
  */
 struct ks8695_priv {
@@ -152,6 +159,8 @@
 	enum ks8695_dtype dtype;
 	void __iomem *io_regs;
 
+	struct napi_struct	napi;
+
 	const char *rx_irq_name, *tx_irq_name, *link_irq_name;
 	int rx_irq, tx_irq, link_irq;
 
@@ -172,6 +181,7 @@
 	dma_addr_t rx_ring_dma;
 	struct ks8695_skbuff rx_buffers[MAX_RX_DESC];
 	int next_rx_desc_read;
+	spinlock_t rx_lock;
 
 	int msg_enable;
 };
@@ -392,29 +402,74 @@
 }
 
 /**
+ *	ks8695_get_rx_enable_bit - Get rx interrupt enable/status bit
+ *	@ksp: Private data for the KS8695 Ethernet
+ *
+ *    For KS8695 document:
+ *    Interrupt Enable Register (offset 0xE204)
+ *        Bit29 : WAN MAC Receive Interrupt Enable
+ *        Bit16 : LAN MAC Receive Interrupt Enable
+ *    Interrupt Status Register (Offset 0xF208)
+ *        Bit29: WAN MAC Receive Status
+ *        Bit16: LAN MAC Receive Status
+ *    So, this Rx interrrupt enable/status bit number is equal
+ *    as Rx IRQ number.
+ */
+static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
+{
+	return ksp->rx_irq;
+}
+
+/**
  *	ks8695_rx_irq - Receive IRQ handler
  *	@irq: The IRQ which went off (ignored)
  *	@dev_id: The net_device for the interrupt
  *
- *	Process the RX ring, passing any received packets up to the
- *	host.  If we received anything other than errors, we then
- *	refill the ring.
+ *	Inform NAPI that packet reception needs to be scheduled
  */
+
 static irqreturn_t
 ks8695_rx_irq(int irq, void *dev_id)
 {
 	struct net_device *ndev = (struct net_device *)dev_id;
 	struct ks8695_priv *ksp = netdev_priv(ndev);
+
+	spin_lock(&ksp->rx_lock);
+
+	if (napi_schedule_prep(&ksp->napi)) {
+		unsigned long status = readl(KS8695_IRQ_VA + KS8695_INTEN);
+		unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
+		/*disable rx interrupt*/
+		status &= ~mask_bit;
+		writel(status , KS8695_IRQ_VA + KS8695_INTEN);
+		__napi_schedule(&ksp->napi);
+	}
+
+	spin_unlock(&ksp->rx_lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ks8695_rx - Receive packets  called by NAPI poll method
+ *	@ksp: Private data for the KS8695 Ethernet
+ *	@budget: The max packets would be receive
+ */
+
+static int ks8695_rx(struct ks8695_priv *ksp, int budget)
+{
+	struct net_device *ndev = ksp->ndev;
 	struct sk_buff *skb;
 	int buff_n;
 	u32 flags;
 	int pktlen;
 	int last_rx_processed = -1;
+	int received = 0;
 
 	buff_n = ksp->next_rx_desc_read;
-	do {
-		if (ksp->rx_buffers[buff_n].skb &&
-		    !(ksp->rx_ring[buff_n].status & cpu_to_le32(RDES_OWN))) {
+	while (received < budget
+			&& ksp->rx_buffers[buff_n].skb
+			&& (!(ksp->rx_ring[buff_n].status &
+					cpu_to_le32(RDES_OWN)))) {
 			rmb();
 			flags = le32_to_cpu(ksp->rx_ring[buff_n].status);
 			/* Found an SKB which we own, this means we
@@ -464,7 +519,7 @@
 			/* Relinquish the SKB to the network layer */
 			skb_put(skb, pktlen);
 			skb->protocol = eth_type_trans(skb, ndev);
-			netif_rx(skb);
+			netif_receive_skb(skb);
 
 			/* Record stats */
 			ndev->stats.rx_packets++;
@@ -478,29 +533,55 @@
 			/* Give the ring entry back to the hardware */
 			ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
 rx_finished:
+			received++;
 			/* And note this as processed so we can start
 			 * from here next time
 			 */
 			last_rx_processed = buff_n;
-		} else {
-			/* Ran out of things to process, stop now */
-			break;
-		}
-		buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
-	} while (buff_n != ksp->next_rx_desc_read);
-
-	/* And note which RX descriptor we last did anything with */
-	if (likely(last_rx_processed != -1))
-		ksp->next_rx_desc_read =
-			(last_rx_processed + 1) & MAX_RX_DESC_MASK;
-
+			buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
+			/*And note which RX descriptor we last did */
+			if (likely(last_rx_processed != -1))
+				ksp->next_rx_desc_read =
+					(last_rx_processed + 1) &
+					MAX_RX_DESC_MASK;
+	}
 	/* And refill the buffers */
 	ks8695_refill_rxbuffers(ksp);
 
-	/* Kick the RX DMA engine, in case it became suspended */
+	/* Kick the RX DMA engine, in case it became
+	 *  suspended */
 	ks8695_writereg(ksp, KS8695_DRSC, 0);
+	return received;
+}
 
-	return IRQ_HANDLED;
+
+/**
+ *	ks8695_poll - Receive packet by NAPI poll method
+ *	@ksp: Private data for the KS8695 Ethernet
+ *	@budget: The remaining number packets for network subsystem
+ *
+ *     Invoked by the network core when it requests for new
+ *     packets from the driver
+ */
+static int ks8695_poll(struct napi_struct *napi, int budget)
+{
+	struct ks8695_priv *ksp = container_of(napi, struct ks8695_priv, napi);
+	unsigned long  work_done;
+
+	unsigned long isr = readl(KS8695_IRQ_VA + KS8695_INTEN);
+	unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
+
+	work_done = ks8695_rx(ksp, budget);
+
+	if (work_done < budget) {
+		unsigned long flags;
+		spin_lock_irqsave(&ksp->rx_lock, flags);
+		/*enable rx interrupt*/
+		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
+		__napi_complete(napi);
+		spin_unlock_irqrestore(&ksp->rx_lock, flags);
+	}
+	return work_done;
 }
 
 /**
@@ -1253,6 +1334,7 @@
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 
 	netif_stop_queue(ndev);
+	napi_disable(&ksp->napi);
 	netif_carrier_off(ndev);
 
 	ks8695_shutdown(ksp);
@@ -1287,6 +1369,7 @@
 		return ret;
 	}
 
+	napi_enable(&ksp->napi);
 	netif_start_queue(ndev);
 
 	return 0;
@@ -1472,6 +1555,8 @@
 	SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops);
 	ndev->watchdog_timeo	 = msecs_to_jiffies(watchdog);
 
+	netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT);
+
 	/* Retrieve the default MAC addr from the chip. */
 	/* The bootloader should have left it in there for us. */
 
@@ -1505,6 +1590,7 @@
 
 	/* And initialise the queue's lock */
 	spin_lock_init(&ksp->txq_lock);
+	spin_lock_init(&ksp->rx_lock);
 
 	/* Specify the RX DMA ring buffer */
 	ksp->rx_ring = ksp->ring_base + TX_RING_DMA_SIZE;
@@ -1626,6 +1712,7 @@
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 
 	platform_set_drvdata(pdev, NULL);
+	netif_napi_del(&ksp->napi);
 
 	unregister_netdev(ndev);
 	ks8695_release_device(ksp);
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/arm/w90p910_ether.c
index 25e2627..b7f3866 100644
--- a/drivers/net/arm/w90p910_ether.c
+++ b/drivers/net/arm/w90p910_ether.c
@@ -160,8 +160,8 @@
 	struct mii_if_info mii;
 	struct timer_list check_timer;
 	void __iomem *reg;
-	unsigned int rxirq;
-	unsigned int txirq;
+	int rxirq;
+	int txirq;
 	unsigned int cur_tx;
 	unsigned int cur_rx;
 	unsigned int finish_tx;
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 544d5af..b14f479 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -350,13 +350,13 @@
 	slot = -1;
 	/* We must check for the EEPROM-config boards first, else accessing
 	   IOCONFIG0 will move the board! */
-	if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr
-		&& read_eeprom(ioaddr, 4) == 0x0000
-		&& (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400)
+	if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr &&
+	    read_eeprom(ioaddr, 4) == 0x0000 &&
+	    (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400)
 		is_at1700 = 1;
-	else if (inb(ioaddr   + SAPROM    ) == 0x00
-		&& inb(ioaddr + SAPROM + 1) == 0x00
-		&& inb(ioaddr + SAPROM + 2) == 0x0e)
+	else if (inb(ioaddr + SAPROM    ) == 0x00 &&
+		 inb(ioaddr + SAPROM + 1) == 0x00 &&
+		 inb(ioaddr + SAPROM + 2) == 0x0e)
 		is_fmv18x = 1;
 	else {
 		goto err_out;
@@ -468,7 +468,7 @@
 	lp->jumpered = is_fmv18x;
 	lp->mca_slot = slot;
 	/* Snarf the interrupt vector now. */
-	ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev);
+	ret = request_irq(irq, net_interrupt, 0, DRV_NAME, dev);
 	if (ret) {
 		printk(KERN_ERR "AT1700 at %#3x is unusable due to a "
 		       "conflict on IRQ %d.\n",
@@ -839,8 +839,8 @@
 	if (dev->flags & IFF_PROMISC) {
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
-	} else if (dev->mc_count > MC_FILTERBREAK
-			   ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if (dev->mc_count > MC_FILTERBREAK ||
+			   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
diff --git a/drivers/net/atarilance.c b/drivers/net/atarilance.c
index 0c0dece..c5721cb 100644
--- a/drivers/net/atarilance.c
+++ b/drivers/net/atarilance.c
@@ -930,8 +930,8 @@
 			}
 #endif
 
-			if (lp->tx_full && (netif_queue_stopped(dev))
-				&& dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
+			if (lp->tx_full && (netif_queue_stopped(dev)) &&
+				dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
 				/* The ring is no longer full, clear tbusy. */
 				lp->tx_full = 0;
 				netif_wake_queue (dev);
diff --git a/drivers/net/atl1c/atl1c.h b/drivers/net/atl1c/atl1c.h
index 2a1120a..a348a22 100644
--- a/drivers/net/atl1c/atl1c.h
+++ b/drivers/net/atl1c/atl1c.h
@@ -470,12 +470,28 @@
 struct atl1c_buffer {
 	struct sk_buff *skb;	/* socket buffer */
 	u16 length;		/* rx buffer length */
-	u16 state;		/* state of buffer */
-#define ATL1_BUFFER_FREE	0
-#define ATL1_BUFFER_BUSY	1
+	u16 flags;		/* information of buffer */
+#define ATL1C_BUFFER_FREE		0x0001
+#define ATL1C_BUFFER_BUSY		0x0002
+#define ATL1C_BUFFER_STATE_MASK		0x0003
+
+#define ATL1C_PCIMAP_SINGLE		0x0004
+#define ATL1C_PCIMAP_PAGE		0x0008
+#define ATL1C_PCIMAP_TYPE_MASK		0x000C
+
 	dma_addr_t dma;
 };
 
+#define ATL1C_SET_BUFFER_STATE(buff, state) do {	\
+	((buff)->flags) &= ~ATL1C_BUFFER_STATE_MASK;	\
+	((buff)->flags) |= (state);			\
+	} while (0)
+
+#define ATL1C_SET_PCIMAP_TYPE(buff, type) do {		\
+	((buff)->flags) &= ~ATL1C_PCIMAP_TYPE_MASK;	\
+	((buff)->flags) |= (type);			\
+	} while (0)
+
 /* transimit packet descriptor (tpd) ring */
 struct atl1c_tpd_ring {
 	void *desc;		/* descriptor ring virtual address */
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 1372e9a9..1e2f57d 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -710,6 +710,29 @@
 	return 0;
 }
 
+static inline void atl1c_clean_buffer(struct pci_dev *pdev,
+				struct atl1c_buffer *buffer_info, int in_irq)
+{
+	if (buffer_info->flags & ATL1C_BUFFER_FREE)
+		return;
+	if (buffer_info->dma) {
+		if (buffer_info->flags & ATL1C_PCIMAP_SINGLE)
+			pci_unmap_single(pdev, buffer_info->dma,
+					buffer_info->length, PCI_DMA_TODEVICE);
+		else if (buffer_info->flags & ATL1C_PCIMAP_PAGE)
+			pci_unmap_page(pdev, buffer_info->dma,
+					buffer_info->length, PCI_DMA_TODEVICE);
+	}
+	if (buffer_info->skb) {
+		if (in_irq)
+			dev_kfree_skb_irq(buffer_info->skb);
+		else
+			dev_kfree_skb(buffer_info->skb);
+	}
+	buffer_info->dma = 0;
+	buffer_info->skb = NULL;
+	ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE);
+}
 /*
  * atl1c_clean_tx_ring - Free Tx-skb
  * @adapter: board private structure
@@ -725,22 +748,12 @@
 	ring_count = tpd_ring->count;
 	for (index = 0; index < ring_count; index++) {
 		buffer_info = &tpd_ring->buffer_info[index];
-		if (buffer_info->state == ATL1_BUFFER_FREE)
-			continue;
-		if (buffer_info->dma)
-			pci_unmap_single(pdev, buffer_info->dma,
-					buffer_info->length,
-					PCI_DMA_TODEVICE);
-		if (buffer_info->skb)
-			dev_kfree_skb(buffer_info->skb);
-		buffer_info->dma = 0;
-		buffer_info->skb = NULL;
-		buffer_info->state = ATL1_BUFFER_FREE;
+		atl1c_clean_buffer(pdev, buffer_info, 0);
 	}
 
 	/* Zero out Tx-buffers */
 	memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) *
-				ring_count);
+		ring_count);
 	atomic_set(&tpd_ring->next_to_clean, 0);
 	tpd_ring->next_to_use = 0;
 }
@@ -760,16 +773,7 @@
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		for (j = 0; j < rfd_ring[i].count; j++) {
 			buffer_info = &rfd_ring[i].buffer_info[j];
-			if (buffer_info->state == ATL1_BUFFER_FREE)
-				continue;
-			if (buffer_info->dma)
-				pci_unmap_single(pdev, buffer_info->dma,
-						buffer_info->length,
-						PCI_DMA_FROMDEVICE);
-			if (buffer_info->skb)
-				dev_kfree_skb(buffer_info->skb);
-			buffer_info->state = ATL1_BUFFER_FREE;
-			buffer_info->skb = NULL;
+			atl1c_clean_buffer(pdev, buffer_info, 0);
 		}
 		/* zero out the descriptor ring */
 		memset(rfd_ring[i].desc, 0, rfd_ring[i].size);
@@ -796,7 +800,8 @@
 		atomic_set(&tpd_ring[i].next_to_clean, 0);
 		buffer_info = tpd_ring[i].buffer_info;
 		for (j = 0; j < tpd_ring->count; j++)
-			buffer_info[i].state = ATL1_BUFFER_FREE;
+			ATL1C_SET_BUFFER_STATE(&buffer_info[i],
+					ATL1C_BUFFER_FREE);
 	}
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		rfd_ring[i].next_to_use = 0;
@@ -805,7 +810,7 @@
 		rrd_ring[i].next_to_clean = 0;
 		for (j = 0; j < rfd_ring[i].count; j++) {
 			buffer_info = &rfd_ring[i].buffer_info[j];
-			buffer_info->state = ATL1_BUFFER_FREE;
+			ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE);
 		}
 	}
 }
@@ -1447,6 +1452,7 @@
 	struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *)
 				&adapter->tpd_ring[type];
 	struct atl1c_buffer *buffer_info;
+	struct pci_dev *pdev = adapter->pdev;
 	u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
 	u16 hw_next_to_clean;
 	u16 shift;
@@ -1462,16 +1468,7 @@
 
 	while (next_to_clean != hw_next_to_clean) {
 		buffer_info = &tpd_ring->buffer_info[next_to_clean];
-		if (buffer_info->state == ATL1_BUFFER_BUSY) {
-			pci_unmap_page(adapter->pdev, buffer_info->dma,
-					buffer_info->length, PCI_DMA_TODEVICE);
-			buffer_info->dma = 0;
-			if (buffer_info->skb) {
-				dev_kfree_skb_irq(buffer_info->skb);
-				buffer_info->skb = NULL;
-			}
-			buffer_info->state = ATL1_BUFFER_FREE;
-		}
+		atl1c_clean_buffer(pdev, buffer_info, 1);
 		if (++next_to_clean == tpd_ring->count)
 			next_to_clean = 0;
 		atomic_set(&tpd_ring->next_to_clean, next_to_clean);
@@ -1587,7 +1584,7 @@
 	buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
 	next_info = &rfd_ring->buffer_info[next_next];
 
-	while (next_info->state == ATL1_BUFFER_FREE) {
+	while (next_info->flags & ATL1C_BUFFER_FREE) {
 		rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use);
 
 		skb = dev_alloc_skb(adapter->rx_buffer_len);
@@ -1603,12 +1600,13 @@
 		 * the 14 byte MAC header is removed
 		 */
 		vir_addr = skb->data;
-		buffer_info->state = ATL1_BUFFER_BUSY;
+		ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 		buffer_info->dma = pci_map_single(pdev, vir_addr,
 						buffer_info->length,
 						PCI_DMA_FROMDEVICE);
+		ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE);
 		rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 		rfd_next_to_use = next_next;
 		if (++next_next == rfd_ring->count)
@@ -1653,7 +1651,8 @@
 			RRS_RX_RFD_INDEX_MASK;
 	for (i = 0; i < num; i++) {
 		buffer_info[rfd_index].skb = NULL;
-		buffer_info[rfd_index].state = ATL1_BUFFER_FREE;
+		ATL1C_SET_BUFFER_STATE(&buffer_info[rfd_index],
+					ATL1C_BUFFER_FREE);
 		if (++rfd_index == rfd_ring->count)
 			rfd_index = 0;
 	}
@@ -1967,7 +1966,8 @@
 		buffer_info->length = map_len;
 		buffer_info->dma = pci_map_single(adapter->pdev,
 					skb->data, hdr_len, PCI_DMA_TODEVICE);
-		buffer_info->state = ATL1_BUFFER_BUSY;
+		ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
+		ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE);
 		mapped_len += map_len;
 		use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
 		use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
@@ -1981,16 +1981,14 @@
 		else {
 			use_tpd = atl1c_get_tpd(adapter, type);
 			memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
-			use_tpd = atl1c_get_tpd(adapter, type);
-			memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
 		}
 		buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
 		buffer_info->length = buf_len - mapped_len;
 		buffer_info->dma =
 			pci_map_single(adapter->pdev, skb->data + mapped_len,
 					buffer_info->length, PCI_DMA_TODEVICE);
-		buffer_info->state = ATL1_BUFFER_BUSY;
-
+		ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
+		ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE);
 		use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
 		use_tpd->buffer_len  = cpu_to_le16(buffer_info->length);
 	}
@@ -2010,8 +2008,8 @@
 					frag->page_offset,
 					buffer_info->length,
 					PCI_DMA_TODEVICE);
-		buffer_info->state = ATL1_BUFFER_BUSY;
-
+		ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
+		ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_PAGE);
 		use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
 		use_tpd->buffer_len  = cpu_to_le16(buffer_info->length);
 	}
@@ -2137,7 +2135,7 @@
 
 	if (!adapter->have_msi)
 		flags |= IRQF_SHARED;
-	err = request_irq(adapter->pdev->irq, &atl1c_intr, flags,
+	err = request_irq(adapter->pdev->irq, atl1c_intr, flags,
 			netdev->name, netdev);
 	if (err) {
 		if (netif_msg_ifup(adapter))
diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index 60edb9f..a76006c 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -131,11 +131,6 @@
 	return 0;
 }
 
-static u32 atl1e_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
 static u32 atl1e_get_msglevel(struct net_device *netdev)
 {
 #ifdef DBG
@@ -145,10 +140,6 @@
 #endif
 }
 
-static void atl1e_set_msglevel(struct net_device *netdev, u32 data)
-{
-}
-
 static int atl1e_get_regs_len(struct net_device *netdev)
 {
 	return AT_REGS_LEN * sizeof(u32);
@@ -387,18 +378,14 @@
 	.get_wol                = atl1e_get_wol,
 	.set_wol                = atl1e_set_wol,
 	.get_msglevel           = atl1e_get_msglevel,
-	.set_msglevel           = atl1e_set_msglevel,
 	.nway_reset             = atl1e_nway_reset,
 	.get_link               = ethtool_op_get_link,
 	.get_eeprom_len         = atl1e_get_eeprom_len,
 	.get_eeprom             = atl1e_get_eeprom,
 	.set_eeprom             = atl1e_set_eeprom,
-	.get_tx_csum            = atl1e_get_tx_csum,
-	.get_sg                 = ethtool_op_get_sg,
+	.set_tx_csum            = ethtool_op_set_tx_hw_csum,
 	.set_sg                 = ethtool_op_set_sg,
-#ifdef NETIF_F_TSO
-	.get_tso                = ethtool_op_get_tso,
-#endif
+	.set_tso                = ethtool_op_set_tso,
 };
 
 void atl1e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 955da73..08f8c09 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -1433,14 +1433,12 @@
 
 			packet_size = ((prrs->word1 >> RRS_PKT_SIZE_SHIFT) &
 					RRS_PKT_SIZE_MASK) - 4; /* CRC */
-			skb = netdev_alloc_skb(netdev,
-					       packet_size + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(netdev, packet_size);
 			if (skb == NULL) {
 				dev_warn(&pdev->dev, "%s: Memory squeeze,"
 					"deferring packet.\n", netdev->name);
 				goto skip_pkt;
 			}
-			skb_reserve(skb, NET_IP_ALIGN);
 			skb->dev = netdev;
 			memcpy(skb->data, (u8 *)(prrs + 1), packet_size);
 			skb_put(skb, packet_size);
@@ -1666,41 +1664,6 @@
 			}
 			return 0;
 		}
-
-		if (offload_type & SKB_GSO_TCPV6) {
-			real_len = (((unsigned char *)ipv6_hdr(skb) - skb->data)
-					+ ntohs(ipv6_hdr(skb)->payload_len));
-			if (real_len < skb->len)
-				pskb_trim(skb, real_len);
-
-			/* check payload == 0 byte ? */
-			hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
-			if (unlikely(skb->len == hdr_len)) {
-				/* only xsum need */
-				dev_warn(&pdev->dev,
-					"IPV6 tso with zero data??\n");
-				goto check_sum;
-			} else {
-				tcp_hdr(skb)->check = ~csum_ipv6_magic(
-						&ipv6_hdr(skb)->saddr,
-						&ipv6_hdr(skb)->daddr,
-						0, IPPROTO_TCP, 0);
-				tpd->word3 |= 1 << TPD_IP_VERSION_SHIFT;
-				hdr_len >>= 1;
-				tpd->word3 |= (hdr_len & TPD_V6_IPHLLO_MASK) <<
-					TPD_V6_IPHLLO_SHIFT;
-				tpd->word3 |= ((hdr_len >> 3) &
-					TPD_V6_IPHLHI_MASK) <<
-					TPD_V6_IPHLHI_SHIFT;
-				tpd->word3 |= (tcp_hdrlen(skb) >> 2 &
-					TPD_TCPHDRLEN_MASK) <<
-					TPD_TCPHDRLEN_SHIFT;
-				tpd->word3 |= ((skb_shinfo(skb)->gso_size) &
-					TPD_MSS_MASK) << TPD_MSS_SHIFT;
-					tpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
-			}
-		}
-		return 0;
 	}
 
 check_sum:
@@ -1932,7 +1895,7 @@
 
 	if (!adapter->have_msi)
 		flags |= IRQF_SHARED;
-	err = request_irq(adapter->pdev->irq, &atl1e_intr, flags,
+	err = request_irq(adapter->pdev->irq, atl1e_intr, flags,
 			netdev->name, netdev);
 	if (err) {
 		dev_dbg(&pdev->dev,
@@ -2289,7 +2252,6 @@
 		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
 	netdev->features |= NETIF_F_LLTX;
 	netdev->features |= NETIF_F_TSO;
-	netdev->features |= NETIF_F_TSO6;
 
 	return 0;
 }
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 00569dc..b6cf326 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -1344,8 +1344,8 @@
 
 	/* link result is our setting */
 	if (!reconfig) {
-		if (adapter->link_speed != speed
-		    || adapter->link_duplex != duplex) {
+		if (adapter->link_speed != speed ||
+		    adapter->link_duplex != duplex) {
 			adapter->link_speed = speed;
 			adapter->link_duplex = duplex;
 			atl1_setup_mac_ctrl(adapter);
@@ -1864,21 +1864,14 @@
 
 		rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
 
-		skb = netdev_alloc_skb(adapter->netdev,
-				       adapter->rx_buffer_len + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(adapter->netdev,
+						adapter->rx_buffer_len);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->netdev->stats.rx_dropped++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->alloced = 1;
 		buffer_info->skb = skb;
 		buffer_info->length = (u16) adapter->rx_buffer_len;
@@ -2094,8 +2087,8 @@
 	}
 	atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);
 
-	if (netif_queue_stopped(adapter->netdev)
-	    && netif_carrier_ok(adapter->netdev))
+	if (netif_queue_stopped(adapter->netdev) &&
+	    netif_carrier_ok(adapter->netdev))
 		netif_wake_queue(adapter->netdev);
 }
 
@@ -2596,7 +2589,7 @@
 		irq_flags |= IRQF_SHARED;
 	}
 
-	err = request_irq(adapter->pdev->irq, &atl1_intr, irq_flags,
+	err = request_irq(adapter->pdev->irq, atl1_intr, irq_flags,
 			netdev->name, netdev);
 	if (unlikely(err))
 		goto err_up;
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index ab68886..c0451d7 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -409,7 +409,7 @@
 		if (rxd->status.ok && rxd->status.pkt_size >= 60) {
 			int rx_size = (int)(rxd->status.pkt_size - 4);
 			/* alloc new buffer */
-			skb = netdev_alloc_skb(netdev, rx_size + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(netdev, rx_size);
 			if (NULL == skb) {
 				printk(KERN_WARNING
 					"%s: Mem squeeze, deferring packet.\n",
@@ -421,7 +421,6 @@
 				netdev->stats.rx_dropped++;
 				break;
 			}
-			skb_reserve(skb, NET_IP_ALIGN);
 			skb->dev = netdev;
 			memcpy(skb->data, rxd->packet, rx_size);
 			skb_put(skb, rx_size);
@@ -652,7 +651,7 @@
 	if (adapter->have_msi)
 		flags &= ~IRQF_SHARED;
 
-	return request_irq(adapter->pdev->irq, &atl2_intr, flags, netdev->name,
+	return request_irq(adapter->pdev->irq, atl2_intr, flags, netdev->name,
 		netdev);
 }
 
diff --git a/drivers/net/atp.c b/drivers/net/atp.c
index 9043294..2f8261c 100644
--- a/drivers/net/atp.c
+++ b/drivers/net/atp.c
@@ -437,7 +437,7 @@
 	/* The interrupt line is turned off (tri-stated) when the device isn't in
 	   use.  That's especially important for "attached" interfaces where the
 	   port or interrupt may be shared. */
-	ret = request_irq(dev->irq, &atp_interrupt, 0, dev->name, dev);
+	ret = request_irq(dev->irq, atp_interrupt, 0, dev->name, dev);
 	if (ret)
 		return ret;
 
@@ -673,8 +673,8 @@
 				netif_wake_queue(dev);	/* Inform upper layers. */
 			}
 			num_tx_since_rx++;
-		} else if (num_tx_since_rx > 8
-				   && time_after(jiffies, dev->last_rx + HZ)) {
+		} else if (num_tx_since_rx > 8 &&
+			   time_after(jiffies, dev->last_rx + HZ)) {
 			if (net_debug > 2)
 				printk(KERN_DEBUG "%s: Missed packet? No Rx after %d Tx and "
 					   "%ld jiffies status %02x  CMR1 %02x.\n", dev->name,
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index ce6f1ac..6bac046 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -881,7 +881,7 @@
 	if (au1000_debug > 4)
 		printk("%s: open: dev=%p\n", dev->name, dev);
 
-	if ((retval = request_irq(dev->irq, &au1000_interrupt, 0,
+	if ((retval = request_irq(dev->irq, au1000_interrupt, 0,
 					dev->name, dev))) {
 		printk(KERN_ERR "%s: unable to get IRQ %d\n",
 				dev->name, dev->irq);
@@ -1088,7 +1088,14 @@
 		return NULL;
 	}
 
-	if ((err = register_netdev(dev)) != 0) {
+	dev->base_addr = base;
+	dev->irq = irq;
+	dev->netdev_ops = &au1000_netdev_ops;
+	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+	dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
+	err = register_netdev(dev);
+	if (err != 0) {
 		printk(KERN_ERR "%s: Cannot register net device, error %d\n",
 				DRV_NAME, err);
 		free_netdev(dev);
@@ -1209,12 +1216,6 @@
 		aup->tx_db_inuse[i] = pDB;
 	}
 
-	dev->base_addr = base;
-	dev->irq = irq;
-	dev->netdev_ops = &au1000_netdev_ops;
-	SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
-	dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
 	/*
 	 * The boot code uses the ethernet controller, so reset it to start
 	 * fresh.  au1000_init() expects that the device is in reset state.
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index e046943..2a91323 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -912,9 +912,6 @@
 			bp->istat = istat;
 			__b44_disable_ints(bp);
 			__napi_schedule(&bp->napi);
-		} else {
-			printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
-			       dev->name);
 		}
 
 irq_ack:
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index ba29dc3..1f6c548 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -320,16 +320,13 @@
 		if (len < copybreak) {
 			struct sk_buff *nskb;
 
-			nskb = netdev_alloc_skb(dev, len + NET_IP_ALIGN);
+			nskb = netdev_alloc_skb_ip_align(dev, len);
 			if (!nskb) {
 				/* forget packet, just rearm desc */
 				priv->stats.rx_dropped++;
 				continue;
 			}
 
-			/* since we're copying the data, we can align
-			 * them properly */
-			skb_reserve(nskb, NET_IP_ALIGN);
 			dma_sync_single_for_cpu(kdev, desc->address,
 						len, DMA_FROM_DEVICE);
 			memcpy(nskb->data, skb->data, len);
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 3b79a22..9e56014 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -32,23 +32,34 @@
 
 #include "be_hw.h"
 
-#define DRV_VER			"2.101.205"
+#define DRV_VER			"2.101.346u"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
+#define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
 #define OC_NAME			"Emulex OneConnect 10Gbps NIC"
+#define OC_NAME1		"Emulex OneConnect 10Gbps NIC (be3)"
 #define DRV_DESC		BE_NAME "Driver"
 
 #define BE_VENDOR_ID 		0x19a2
 #define BE_DEVICE_ID1		0x211
+#define BE_DEVICE_ID2		0x221
 #define OC_DEVICE_ID1		0x700
 #define OC_DEVICE_ID2		0x701
+#define OC_DEVICE_ID3		0x710
 
 static inline char *nic_name(struct pci_dev *pdev)
 {
-	if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+	switch (pdev->device) {
+	case OC_DEVICE_ID1:
+	case OC_DEVICE_ID2:
 		return OC_NAME;
-	else
+	case OC_DEVICE_ID3:
+		return OC_NAME1;
+	case BE_DEVICE_ID2:
+		return BE3_NAME;
+	default:
 		return BE_NAME;
+	}
 }
 
 /* Number of bytes of an RX frame that are copied to skb->data */
@@ -159,7 +170,7 @@
 	u32 cache_barrier[16];
 
 	u32 be_ethrx_post_fail;/* number of ethrx buffer alloc failures */
-	u32 be_polls;		/* number of times NAPI called poll function */
+	u32 be_rx_polls;	/* number of times NAPI called poll function */
 	u32 be_rx_events;	/* number of ucast rx completion events  */
 	u32 be_rx_compl;	/* number of rx completion entries processed */
 	ulong be_rx_jiffies;
@@ -181,7 +192,6 @@
 
 struct be_stats_obj {
 	struct be_drvr_stats drvr_stats;
-	struct net_device_stats net_stats;
 	struct be_dma_mem cmd;
 };
 
@@ -244,6 +254,7 @@
 	struct vlan_group *vlan_grp;
 	u16 num_vlans;
 	u8 vlan_tag[VLAN_GROUP_ARRAY_LEN];
+	struct be_dma_mem mc_cmd_mem;
 
 	struct be_stats_obj stats;
 	/* Work queue used to perform periodic tasks like getting statistics */
@@ -258,9 +269,12 @@
 	bool link_up;
 	u32 port_num;
 	bool promiscuous;
+	bool wol;
 	u32 cap;
 	u32 rx_fc;		/* Rx flow control */
 	u32 tx_fc;		/* Tx flow control */
+	int link_speed;
+	u8 port_type;
 };
 
 extern const struct ethtool_ops be_ethtool_ops;
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 28a0eda..1b68bd9 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -71,8 +71,8 @@
 		extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
 				CQE_STATUS_EXTD_MASK;
 		dev_warn(&adapter->pdev->dev,
-			"Error in cmd completion: status(compl/extd)=%d/%d\n",
-			compl_status, extd_status);
+		"Error in cmd completion - opcode %d, compl %d, extd %d\n",
+			compl->tag0, compl_status, extd_status);
 	}
 	return compl_status;
 }
@@ -277,7 +277,7 @@
 
 /* Don't touch the hdr after it's prepared */
 static void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
-				bool embedded, u8 sge_cnt)
+				bool embedded, u8 sge_cnt, u32 opcode)
 {
 	if (embedded)
 		wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
@@ -285,6 +285,7 @@
 		wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
 				MCC_WRB_SGE_CNT_SHIFT;
 	wrb->payload_length = payload_len;
+	wrb->tag0 = opcode;
 	be_dws_cpu_to_le(wrb, 20);
 }
 
@@ -349,7 +350,11 @@
 	struct be_queue_info *mccq = &adapter->mcc_obj.q;
 	struct be_mcc_wrb *wrb;
 
-	BUG_ON(atomic_read(&mccq->used) >= mccq->len);
+	if (atomic_read(&mccq->used) >= mccq->len) {
+		dev_err(&adapter->pdev->dev, "Out of MCCQ wrbs\n");
+		return NULL;
+	}
+
 	wrb = queue_head_node(mccq);
 	queue_head_inc(mccq);
 	atomic_inc(&mccq->used);
@@ -357,6 +362,57 @@
 	return wrb;
 }
 
+/* Tell fw we're about to start firing cmds by writing a
+ * special pattern across the wrb hdr; uses mbox
+ */
+int be_cmd_fw_init(struct be_adapter *adapter)
+{
+	u8 *wrb;
+	int status;
+
+	spin_lock(&adapter->mbox_lock);
+
+	wrb = (u8 *)wrb_from_mbox(adapter);
+	*wrb++ = 0xFF;
+	*wrb++ = 0x12;
+	*wrb++ = 0x34;
+	*wrb++ = 0xFF;
+	*wrb++ = 0xFF;
+	*wrb++ = 0x56;
+	*wrb++ = 0x78;
+	*wrb = 0xFF;
+
+	status = be_mbox_notify_wait(adapter);
+
+	spin_unlock(&adapter->mbox_lock);
+	return status;
+}
+
+/* Tell fw we're done with firing cmds by writing a
+ * special pattern across the wrb hdr; uses mbox
+ */
+int be_cmd_fw_clean(struct be_adapter *adapter)
+{
+	u8 *wrb;
+	int status;
+
+	spin_lock(&adapter->mbox_lock);
+
+	wrb = (u8 *)wrb_from_mbox(adapter);
+	*wrb++ = 0xFF;
+	*wrb++ = 0xAA;
+	*wrb++ = 0xBB;
+	*wrb++ = 0xFF;
+	*wrb++ = 0xFF;
+	*wrb++ = 0xCC;
+	*wrb++ = 0xDD;
+	*wrb = 0xFF;
+
+	status = be_mbox_notify_wait(adapter);
+
+	spin_unlock(&adapter->mbox_lock);
+	return status;
+}
 int be_cmd_eq_create(struct be_adapter *adapter,
 		struct be_queue_info *eq, int eq_delay)
 {
@@ -370,7 +426,7 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, OPCODE_COMMON_EQ_CREATE);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_EQ_CREATE, sizeof(*req));
@@ -414,7 +470,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_MAC_QUERY);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_MAC_QUERY, sizeof(*req));
@@ -448,9 +505,14 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_PMAC_ADD);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_PMAC_ADD, sizeof(*req));
@@ -464,6 +526,7 @@
 		*pmac_id = le32_to_cpu(resp->pmac_id);
 	}
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -478,9 +541,14 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_PMAC_DEL);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_PMAC_DEL, sizeof(*req));
@@ -490,8 +558,8 @@
 
 	status = be_mcc_notify_wait(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
-
 	return status;
 }
 
@@ -512,7 +580,8 @@
 	req = embedded_payload(wrb);
 	ctxt = &req->context;
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_CQ_CREATE);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_CQ_CREATE, sizeof(*req));
@@ -569,7 +638,8 @@
 	req = embedded_payload(wrb);
 	ctxt = &req->context;
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_MCC_CREATE);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 			OPCODE_COMMON_MCC_CREATE, sizeof(*req));
@@ -613,7 +683,8 @@
 	req = embedded_payload(wrb);
 	ctxt = &req->context;
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_ETH_TX_CREATE);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_TX_CREATE,
 		sizeof(*req));
@@ -660,7 +731,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_ETH_RX_CREATE);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH, OPCODE_ETH_RX_CREATE,
 		sizeof(*req));
@@ -701,8 +773,6 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
-
 	switch (queue_type) {
 	case QTYPE_EQ:
 		subsys = CMD_SUBSYSTEM_COMMON;
@@ -727,6 +797,9 @@
 	default:
 		BUG();
 	}
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, opcode);
+
 	be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
 	req->id = cpu_to_le16(q->id);
 
@@ -752,7 +825,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_INTERFACE_CREATE);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
@@ -787,7 +861,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_INTERFACE_DESTROY);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_INTERFACE_DESTROY, sizeof(*req));
@@ -810,15 +885,20 @@
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_get_stats *req;
 	struct be_sge *sge;
+	int status = 0;
 
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = nonemb_cmd->va;
 	sge = nonembedded_sgl(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
-	wrb->tag0 = OPCODE_ETH_GET_STATISTICS;
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+			OPCODE_ETH_GET_STATISTICS);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
 		OPCODE_ETH_GET_STATISTICS, sizeof(*req));
@@ -828,13 +908,14 @@
 
 	be_mcc_notify(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
-	return 0;
+	return status;
 }
 
 /* Uses synchronous mcc */
 int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up)
+			bool *link_up, u8 *mac_speed, u16 *link_speed)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_link_status *req;
@@ -843,11 +924,16 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
 	*link_up = false;
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_LINK_STATUS_QUERY);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_LINK_STATUS_QUERY, sizeof(*req));
@@ -855,10 +941,14 @@
 	status = be_mcc_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
-		if (resp->mac_speed != PHY_LINK_SPEED_ZERO)
+		if (resp->mac_speed != PHY_LINK_SPEED_ZERO) {
 			*link_up = true;
+			*link_speed = le16_to_cpu(resp->link_speed);
+			*mac_speed = resp->mac_speed;
+		}
 	}
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -875,7 +965,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_GET_FW_VERSION);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_GET_FW_VERSION, sizeof(*req));
@@ -897,13 +988,19 @@
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_modify_eq_delay *req;
+	int status = 0;
 
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_MODIFY_EQ_DELAY);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_MODIFY_EQ_DELAY, sizeof(*req));
@@ -915,8 +1012,9 @@
 
 	be_mcc_notify(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
-	return 0;
+	return status;
 }
 
 /* Uses sycnhronous mcc */
@@ -930,9 +1028,14 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_NTWK_VLAN_CONFIG);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req));
@@ -948,6 +1051,7 @@
 
 	status = be_mcc_notify_wait(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -964,9 +1068,13 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0, OPCODE_ETH_PROMISCUOUS);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
 		OPCODE_ETH_PROMISCUOUS, sizeof(*req));
@@ -978,6 +1086,7 @@
 
 	status = be_mcc_notify_wait(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -987,24 +1096,35 @@
  * (mc == NULL) => multicast promiscous
  */
 int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
-		struct dev_mc_list *mc_list, u32 mc_count)
+		struct dev_mc_list *mc_list, u32 mc_count,
+		struct be_dma_mem *mem)
 {
-#define BE_MAX_MC		32 /* set mcast promisc if > 32 */
 	struct be_mcc_wrb *wrb;
-	struct be_cmd_req_mcast_mac_config *req;
+	struct be_cmd_req_mcast_mac_config *req = mem->va;
+	struct be_sge *sge;
+	int status;
 
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
-	req = embedded_payload(wrb);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	sge = nonembedded_sgl(wrb);
+	memset(req, 0, sizeof(*req));
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+			OPCODE_COMMON_NTWK_MULTICAST_SET);
+	sge->pa_hi = cpu_to_le32(upper_32_bits(mem->dma));
+	sge->pa_lo = cpu_to_le32(mem->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(mem->size);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_NTWK_MULTICAST_SET, sizeof(*req));
 
 	req->interface_id = if_id;
-	if (mc_list && mc_count <= BE_MAX_MC) {
+	if (mc_list) {
 		int i;
 		struct dev_mc_list *mc;
 
@@ -1016,11 +1136,11 @@
 		req->promiscuous = 1;
 	}
 
-	be_mcc_notify_wait(adapter);
+	status = be_mcc_notify_wait(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
-
-	return 0;
+	return status;
 }
 
 /* Uses synchrounous mcc */
@@ -1033,9 +1153,14 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_SET_FLOW_CONTROL);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_SET_FLOW_CONTROL, sizeof(*req));
@@ -1045,6 +1170,7 @@
 
 	status = be_mcc_notify_wait(adapter);
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -1059,9 +1185,14 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_GET_FLOW_CONTROL);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_GET_FLOW_CONTROL, sizeof(*req));
@@ -1074,6 +1205,7 @@
 		*rx_fc = le16_to_cpu(resp->rx_flow_control);
 	}
 
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
@@ -1090,7 +1222,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_QUERY_FIRMWARE_CONFIG);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
@@ -1118,7 +1251,8 @@
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_FUNCTION_RESET);
 
 	be_cmd_hdr_prepare(req, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
@@ -1129,6 +1263,113 @@
 	return status;
 }
 
+/* Uses sync mcc */
+int be_cmd_set_beacon_state(struct be_adapter *adapter, u8 port_num,
+			u8 bcn, u8 sts, u8 state)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_enable_disable_beacon *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_ENABLE_DISABLE_BEACON);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_ENABLE_DISABLE_BEACON, sizeof(*req));
+
+	req->port_num = port_num;
+	req->beacon_state = state;
+	req->beacon_duration = bcn;
+	req->status_duration = sts;
+
+	status = be_mcc_notify_wait(adapter);
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+/* Uses sync mcc */
+int be_cmd_get_beacon_state(struct be_adapter *adapter, u8 port_num, u32 *state)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_beacon_state *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+			OPCODE_COMMON_GET_BEACON_STATE);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_GET_BEACON_STATE, sizeof(*req));
+
+	req->port_num = port_num;
+
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_get_beacon_state *resp =
+						embedded_payload(wrb);
+		*state = resp->beacon_state;
+	}
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+/* Uses sync mcc */
+int be_cmd_read_port_type(struct be_adapter *adapter, u32 port,
+				u8 *connector)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_port_type *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(struct be_cmd_resp_port_type), true, 0,
+			OPCODE_COMMON_READ_TRANSRECV_DATA);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_READ_TRANSRECV_DATA, sizeof(*req));
+
+	req->port = cpu_to_le32(port);
+	req->page_num = cpu_to_le32(TR_PAGE_A0);
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_port_type *resp = embedded_payload(wrb);
+			*connector = resp->data.connector;
+	}
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
 int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			u32 flash_type, u32 flash_opcode, u32 buf_size)
 {
@@ -1140,9 +1381,15 @@
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = cmd->va;
 	sge = nonembedded_sgl(wrb);
 
-	be_wrb_hdr_prepare(wrb, cmd->size, false, 1);
+	be_wrb_hdr_prepare(wrb, cmd->size, false, 1,
+			OPCODE_COMMON_WRITE_FLASHROM);
 
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 		OPCODE_COMMON_WRITE_FLASHROM, cmd->size);
@@ -1156,6 +1403,171 @@
 
 	status = be_mcc_notify_wait(adapter);
 
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_write_flashrom *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req)+4, true, 0,
+			OPCODE_COMMON_READ_FLASHROM);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_READ_FLASHROM, sizeof(*req)+4);
+
+	req->params.op_type = cpu_to_le32(FLASHROM_TYPE_REDBOOT);
+	req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
+	req->params.offset = 0x3FFFC;
+	req->params.data_buf_size = 0x4;
+
+	status = be_mcc_notify_wait(adapter);
+	if (!status)
+		memcpy(flashed_crc, req->params.data_buf, 4);
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
+				struct be_dma_mem *nonemb_cmd)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_acpi_wol_magic_config *req;
+	struct be_sge *sge;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = nonemb_cmd->va;
+	sge = nonembedded_sgl(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1,
+			OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ETH,
+		OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG, sizeof(*req));
+	memcpy(req->magic_mac, mac, ETH_ALEN);
+
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd->size);
+
+	status = be_mcc_notify_wait(adapter);
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
+		u32 loopback_type, u32 pkt_size, u32 num_pkts, u64 pattern)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_loopback_test *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0,
+				OPCODE_LOWLEVEL_LOOPBACK_TEST);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+			OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req));
+
+	req->pattern = cpu_to_le64(pattern);
+	req->src_port = cpu_to_le32(port_num);
+	req->dest_port = cpu_to_le32(port_num);
+	req->pkt_size = cpu_to_le32(pkt_size);
+	req->num_pkts = cpu_to_le32(num_pkts);
+	req->loopback_type = cpu_to_le32(loopback_type);
+
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_loopback_test *resp = embedded_payload(wrb);
+		status = le32_to_cpu(resp->status);
+	}
+
+err:
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
+				u32 byte_cnt, struct be_dma_mem *cmd)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_ddrdma_test *req;
+	struct be_sge *sge;
+	int status;
+	int i, j = 0;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	if (!wrb) {
+		status = -EBUSY;
+		goto err;
+	}
+	req = cmd->va;
+	sge = nonembedded_sgl(wrb);
+	be_wrb_hdr_prepare(wrb, cmd->size, false, 1,
+				OPCODE_LOWLEVEL_HOST_DDR_DMA);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL,
+			OPCODE_LOWLEVEL_HOST_DDR_DMA, cmd->size);
+
+	sge->pa_hi = cpu_to_le32(upper_32_bits(cmd->dma));
+	sge->pa_lo = cpu_to_le32(cmd->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(cmd->size);
+
+	req->pattern = cpu_to_le64(pattern);
+	req->byte_count = cpu_to_le32(byte_cnt);
+	for (i = 0; i < byte_cnt; i++) {
+		req->snd_buff[i] = (u8)(pattern >> (j*8));
+		j++;
+		if (j > 7)
+			j = 0;
+	}
+
+	status = be_mcc_notify_wait(adapter);
+
+	if (!status) {
+		struct be_cmd_resp_ddrdma_test *resp;
+		resp = cmd->va;
+		if ((memcmp(resp->rcv_buff, req->snd_buff, byte_cnt) != 0) ||
+				resp->snd_err) {
+			status = -1;
+		}
+	}
+
+err:
 	spin_unlock_bh(&adapter->mcc_lock);
 	return status;
 }
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e5f9676..e7323be 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -112,12 +112,14 @@
 
 #define CMD_SUBSYSTEM_COMMON	0x1
 #define CMD_SUBSYSTEM_ETH 	0x3
+#define CMD_SUBSYSTEM_LOWLEVEL  0xb
 
 #define OPCODE_COMMON_NTWK_MAC_QUERY			1
 #define OPCODE_COMMON_NTWK_MAC_SET			2
 #define OPCODE_COMMON_NTWK_MULTICAST_SET		3
 #define OPCODE_COMMON_NTWK_VLAN_CONFIG  		4
 #define OPCODE_COMMON_NTWK_LINK_STATUS_QUERY		5
+#define OPCODE_COMMON_READ_FLASHROM			6
 #define OPCODE_COMMON_WRITE_FLASHROM			7
 #define OPCODE_COMMON_CQ_CREATE				12
 #define OPCODE_COMMON_EQ_CREATE				13
@@ -138,6 +140,9 @@
 #define OPCODE_COMMON_NTWK_PMAC_ADD			59
 #define OPCODE_COMMON_NTWK_PMAC_DEL			60
 #define OPCODE_COMMON_FUNCTION_RESET			61
+#define OPCODE_COMMON_ENABLE_DISABLE_BEACON		69
+#define OPCODE_COMMON_GET_BEACON_STATE			70
+#define OPCODE_COMMON_READ_TRANSRECV_DATA		73
 
 #define OPCODE_ETH_ACPI_CONFIG				2
 #define OPCODE_ETH_PROMISCUOUS				3
@@ -146,6 +151,10 @@
 #define OPCODE_ETH_RX_CREATE            		8
 #define OPCODE_ETH_TX_DESTROY           		9
 #define OPCODE_ETH_RX_DESTROY           		10
+#define OPCODE_ETH_ACPI_WOL_MAGIC_CONFIG		12
+
+#define OPCODE_LOWLEVEL_HOST_DDR_DMA                    17
+#define OPCODE_LOWLEVEL_LOOPBACK_TEST                   18
 
 struct be_cmd_req_hdr {
 	u8 opcode;		/* dword 0 */
@@ -587,6 +596,8 @@
 	u16 rsvd0;
 } __packed;
 
+/******************** Multicast MAC Config *******************/
+#define BE_MAX_MC		64 /* set mcast promisc if > 64 */
 struct macaddr {
 	u8 byte[ETH_ALEN];
 };
@@ -596,7 +607,7 @@
 	u16 num_mac;
 	u8 promiscuous;
 	u8 interface_id;
-	struct macaddr mac[32];
+	struct macaddr mac[BE_MAX_MC];
 } __packed;
 
 static inline struct be_hw_stats *
@@ -633,9 +644,47 @@
 	u8 mac_fault;
 	u8 mgmt_mac_duplex;
 	u8 mgmt_mac_speed;
-	u16 rsvd0;
+	u16 link_speed;
+	u32 rsvd0;
 } __packed;
 
+/******************** Port Identification ***************************/
+/*    Identifies the type of port attached to NIC     */
+struct be_cmd_req_port_type {
+	struct be_cmd_req_hdr hdr;
+	u32 page_num;
+	u32 port;
+};
+
+enum {
+	TR_PAGE_A0 = 0xa0,
+	TR_PAGE_A2 = 0xa2
+};
+
+struct be_cmd_resp_port_type {
+	struct be_cmd_resp_hdr hdr;
+	u32 page_num;
+	u32 port;
+	struct data {
+		u8 identifier;
+		u8 identifier_ext;
+		u8 connector;
+		u8 transceiver[8];
+		u8 rsvd0[3];
+		u8 length_km;
+		u8 length_hm;
+		u8 length_om1;
+		u8 length_om2;
+		u8 length_cu;
+		u8 length_cu_m;
+		u8 vendor_name[16];
+		u8 rsvd;
+		u8 vendor_oui[3];
+		u8 vendor_pn[16];
+		u8 vendor_rev[4];
+	} data;
+};
+
 /******************** Get FW Version *******************/
 struct be_cmd_req_get_fw_version {
 	struct be_cmd_req_hdr hdr;
@@ -699,6 +748,37 @@
 	u32 rsvd[26];
 };
 
+/******************** Port Beacon ***************************/
+
+#define BEACON_STATE_ENABLED		0x1
+#define BEACON_STATE_DISABLED		0x0
+
+struct be_cmd_req_enable_disable_beacon {
+	struct be_cmd_req_hdr hdr;
+	u8  port_num;
+	u8  beacon_state;
+	u8  beacon_duration;
+	u8  status_duration;
+} __packed;
+
+struct be_cmd_resp_enable_disable_beacon {
+	struct be_cmd_resp_hdr resp_hdr;
+	u32 rsvd0;
+} __packed;
+
+struct be_cmd_req_get_beacon_state {
+	struct be_cmd_req_hdr hdr;
+	u8  port_num;
+	u8  rsvd0;
+	u16 rsvd1;
+} __packed;
+
+struct be_cmd_resp_get_beacon_state {
+	struct be_cmd_resp_hdr resp_hdr;
+	u8 beacon_state;
+	u8 rsvd0[3];
+} __packed;
+
 /****************** Firmware Flash ******************/
 struct flashrom_params {
 	u32 op_code;
@@ -713,6 +793,53 @@
 	struct flashrom_params params;
 };
 
+/************************ WOL *******************************/
+struct be_cmd_req_acpi_wol_magic_config{
+	struct be_cmd_req_hdr hdr;
+	u32 rsvd0[145];
+	u8 magic_mac[6];
+	u8 rsvd2[2];
+} __packed;
+
+/********************** LoopBack test *********************/
+struct be_cmd_req_loopback_test {
+	struct be_cmd_req_hdr hdr;
+	u32 loopback_type;
+	u32 num_pkts;
+	u64 pattern;
+	u32 src_port;
+	u32 dest_port;
+	u32 pkt_size;
+};
+
+struct be_cmd_resp_loopback_test {
+	struct be_cmd_resp_hdr resp_hdr;
+	u32    status;
+	u32    num_txfer;
+	u32    num_rx;
+	u32    miscomp_off;
+	u32    ticks_compl;
+};
+
+/********************** DDR DMA test *********************/
+struct be_cmd_req_ddrdma_test {
+	struct be_cmd_req_hdr hdr;
+	u64 pattern;
+	u32 byte_count;
+	u32 rsvd0;
+	u8  snd_buff[4096];
+	u8  rsvd1[4096];
+};
+
+struct be_cmd_resp_ddrdma_test {
+	struct be_cmd_resp_hdr hdr;
+	u64 pattern;
+	u32 byte_cnt;
+	u32 snd_err;
+	u8  rsvd0[4096];
+	u8  rcv_buff[4096];
+};
+
 extern int be_pci_fnum_get(struct be_adapter *adapter);
 extern int be_cmd_POST(struct be_adapter *adapter);
 extern int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
@@ -743,7 +870,7 @@
 extern int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 			int type);
 extern int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up);
+			bool *link_up, u8 *mac_speed, u16 *link_speed);
 extern int be_cmd_reset(struct be_adapter *adapter);
 extern int be_cmd_get_stats(struct be_adapter *adapter,
 			struct be_dma_mem *nonemb_cmd);
@@ -756,7 +883,8 @@
 extern int be_cmd_promiscuous_config(struct be_adapter *adapter,
 			u8 port_num, bool en);
 extern int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
-			struct dev_mc_list *mc_list, u32 mc_count);
+			struct dev_mc_list *mc_list, u32 mc_count,
+			struct be_dma_mem *mem);
 extern int be_cmd_set_flow_control(struct be_adapter *adapter,
 			u32 tx_fc, u32 rx_fc);
 extern int be_cmd_get_flow_control(struct be_adapter *adapter,
@@ -765,6 +893,22 @@
 			u32 *port_num, u32 *cap);
 extern int be_cmd_reset_function(struct be_adapter *adapter);
 extern int be_process_mcc(struct be_adapter *adapter);
+extern int be_cmd_set_beacon_state(struct be_adapter *adapter,
+			u8 port_num, u8 beacon, u8 status, u8 state);
+extern int be_cmd_get_beacon_state(struct be_adapter *adapter,
+			u8 port_num, u32 *state);
+extern int be_cmd_read_port_type(struct be_adapter *adapter, u32 port,
+					u8 *connector);
 extern int be_cmd_write_flashrom(struct be_adapter *adapter,
 			struct be_dma_mem *cmd, u32 flash_oper,
 			u32 flash_opcode, u32 buf_size);
+extern int be_cmd_get_flash_crc(struct be_adapter *adapter, u8 *flashed_crc);
+extern int be_cmd_enable_magic_wol(struct be_adapter *adapter, u8 *mac,
+				struct be_dma_mem *nonemb_cmd);
+extern int be_cmd_fw_init(struct be_adapter *adapter);
+extern int be_cmd_fw_clean(struct be_adapter *adapter);
+extern int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num,
+				u32 loopback_type, u32 pkt_size,
+				u32 num_pkts, u64 pattern);
+extern int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
+			u32 byte_cnt, struct be_dma_mem *cmd);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index f0fd95b..298b92c 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -55,7 +55,7 @@
 	{DRVSTAT_INFO(be_tx_stops)},
 	{DRVSTAT_INFO(be_fwd_reqs)},
 	{DRVSTAT_INFO(be_tx_wrbs)},
-	{DRVSTAT_INFO(be_polls)},
+	{DRVSTAT_INFO(be_rx_polls)},
 	{DRVSTAT_INFO(be_tx_events)},
 	{DRVSTAT_INFO(be_rx_events)},
 	{DRVSTAT_INFO(be_tx_compl)},
@@ -107,6 +107,18 @@
 };
 #define ETHTOOL_STATS_NUM ARRAY_SIZE(et_stats)
 
+static const char et_self_tests[][ETH_GSTRING_LEN] = {
+	"MAC Loopback test",
+	"PHY Loopback test",
+	"External Loopback test",
+	"DDR DMA test"
+};
+
+#define ETHTOOL_TESTS_NUM ARRAY_SIZE(et_self_tests)
+#define BE_MAC_LOOPBACK 0x0
+#define BE_PHY_LOOPBACK 0x1
+#define BE_ONE_PORT_EXT_LOOPBACK 0x2
+
 static void
 be_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
 {
@@ -234,7 +246,7 @@
 	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
 	struct be_port_rxf_stats *port_stats =
 			&rxf_stats->port[adapter->port_num];
-	struct net_device_stats *net_stats = &adapter->stats.net_stats;
+	struct net_device_stats *net_stats = &netdev->stats;
 	struct be_erx_stats *erx_stats = &hw_stats->erx;
 	void *p = NULL;
 	int i;
@@ -278,19 +290,78 @@
 			data += ETH_GSTRING_LEN;
 		}
 		break;
+	case ETH_SS_TEST:
+		for (i = 0; i < ETHTOOL_TESTS_NUM; i++) {
+			memcpy(data, et_self_tests[i], ETH_GSTRING_LEN);
+			data += ETH_GSTRING_LEN;
+		}
+		break;
 	}
 }
 
-static int be_get_stats_count(struct net_device *netdev)
+static int be_get_sset_count(struct net_device *netdev, int stringset)
 {
-	return ETHTOOL_STATS_NUM;
+	switch (stringset) {
+	case ETH_SS_TEST:
+		return ETHTOOL_TESTS_NUM;
+	case ETH_SS_STATS:
+		return ETHTOOL_STATS_NUM;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
-	ecmd->speed = SPEED_10000;
+	struct be_adapter *adapter = netdev_priv(netdev);
+	u8 mac_speed = 0, connector = 0;
+	u16 link_speed = 0;
+	bool link_up = false;
+	int status;
+
+	if (adapter->link_speed < 0) {
+		status = be_cmd_link_status_query(adapter, &link_up,
+						&mac_speed, &link_speed);
+
+		/* link_speed is in units of 10 Mbps */
+		if (link_speed) {
+			ecmd->speed = link_speed*10;
+		} else {
+			switch (mac_speed) {
+			case PHY_LINK_SPEED_1GBPS:
+				ecmd->speed = SPEED_1000;
+				break;
+			case PHY_LINK_SPEED_10GBPS:
+				ecmd->speed = SPEED_10000;
+				break;
+			}
+		}
+
+		status = be_cmd_read_port_type(adapter, adapter->port_num,
+						&connector);
+		switch (connector) {
+		case 7:
+			ecmd->port = PORT_FIBRE;
+			break;
+		default:
+			ecmd->port = PORT_TP;
+			break;
+		}
+
+		/* Save for future use */
+		adapter->link_speed = ecmd->speed;
+		adapter->port_type = ecmd->port;
+	} else {
+		ecmd->speed = adapter->link_speed;
+		ecmd->port = adapter->port_type;
+	}
+
 	ecmd->duplex = DUPLEX_FULL;
 	ecmd->autoneg = AUTONEG_DISABLE;
+	ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
+	ecmd->phy_address = adapter->port_num;
+	ecmd->transceiver = XCVR_INTERNAL;
+
 	return 0;
 }
 
@@ -335,6 +406,123 @@
 }
 
 static int
+be_phys_id(struct net_device *netdev, u32 data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	int status;
+	u32 cur;
+
+	be_cmd_get_beacon_state(adapter, adapter->port_num, &cur);
+
+	if (cur == BEACON_STATE_ENABLED)
+		return 0;
+
+	if (data < 2)
+		data = 2;
+
+	status = be_cmd_set_beacon_state(adapter, adapter->port_num, 0, 0,
+			BEACON_STATE_ENABLED);
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(data*HZ);
+
+	status = be_cmd_set_beacon_state(adapter, adapter->port_num, 0, 0,
+			BEACON_STATE_DISABLED);
+
+	return status;
+}
+
+static void
+be_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_MAGIC;
+	if (adapter->wol)
+		wol->wolopts = WAKE_MAGIC;
+	else
+		wol->wolopts = 0;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+	return;
+}
+
+static int
+be_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol = true;
+	else
+		adapter->wol = false;
+
+	return 0;
+}
+
+static int
+be_test_ddr_dma(struct be_adapter *adapter)
+{
+	int ret, i;
+	struct be_dma_mem ddrdma_cmd;
+	u64 pattern[2] = {0x5a5a5a5a5a5a5a5a, 0xa5a5a5a5a5a5a5a5};
+
+	ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
+	ddrdma_cmd.va = pci_alloc_consistent(adapter->pdev, ddrdma_cmd.size,
+					&ddrdma_cmd.dma);
+	if (!ddrdma_cmd.va) {
+		dev_err(&adapter->pdev->dev, "Memory allocation failure \n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < 2; i++) {
+		ret = be_cmd_ddr_dma_test(adapter, pattern[i],
+					4096, &ddrdma_cmd);
+		if (ret != 0)
+			goto err;
+	}
+
+err:
+	pci_free_consistent(adapter->pdev, ddrdma_cmd.size,
+			ddrdma_cmd.va, ddrdma_cmd.dma);
+	return ret;
+}
+
+static void
+be_self_test(struct net_device *netdev, struct ethtool_test *test, u64 *data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+
+	memset(data, 0, sizeof(u64) * ETHTOOL_TESTS_NUM);
+
+	if (test->flags & ETH_TEST_FL_OFFLINE) {
+		data[0] = be_cmd_loopback_test(adapter, adapter->port_num,
+						BE_MAC_LOOPBACK, 1500,
+						2, 0xabc);
+		if (data[0] != 0)
+			test->flags |= ETH_TEST_FL_FAILED;
+
+		data[1] = be_cmd_loopback_test(adapter, adapter->port_num,
+						BE_PHY_LOOPBACK, 1500,
+						2, 0xabc);
+		if (data[1] != 0)
+			test->flags |= ETH_TEST_FL_FAILED;
+
+		data[2] = be_cmd_loopback_test(adapter, adapter->port_num,
+						BE_ONE_PORT_EXT_LOOPBACK,
+						1500, 2, 0xabc);
+		if (data[2] != 0)
+			test->flags |= ETH_TEST_FL_FAILED;
+
+		data[3] = be_test_ddr_dma(adapter);
+		if (data[3] != 0)
+			test->flags |= ETH_TEST_FL_FAILED;
+	}
+
+}
+
+static int
 be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -351,6 +539,8 @@
 const struct ethtool_ops be_ethtool_ops = {
 	.get_settings = be_get_settings,
 	.get_drvinfo = be_get_drvinfo,
+	.get_wol = be_get_wol,
+	.set_wol = be_set_wol,
 	.get_link = ethtool_op_get_link,
 	.get_coalesce = be_get_coalesce,
 	.set_coalesce = be_set_coalesce,
@@ -366,7 +556,9 @@
 	.get_tso = ethtool_op_get_tso,
 	.set_tso = ethtool_op_set_tso,
 	.get_strings = be_get_stat_strings,
-	.get_stats_count = be_get_stats_count,
+	.phys_id = be_phys_id,
+	.get_sset_count = be_get_sset_count,
 	.get_ethtool_stats = be_get_ethtool_stats,
 	.flash_device = be_do_flash,
+	.self_test = be_self_test,
 };
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index a3394b4..e2b3bef 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -52,6 +52,10 @@
  */
 #define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK	(1 << 29) /* bit 29 */
 
+/********* Power managment (WOL) **********/
+#define PCICFG_PM_CONTROL_OFFSET		0x44
+#define PCICFG_PM_CONTROL_MASK			0x108	/* bits 3 & 8 */
+
 /********* ISR0 Register offset **********/
 #define CEV_ISR0_OFFSET 			0xC18
 #define CEV_ISR_SIZE				4
@@ -225,6 +229,7 @@
 #define NUM_FLASHDIR_ENTRIES		32
 
 #define FLASHROM_TYPE_ISCSI_ACTIVE	0
+#define FLASHROM_TYPE_REDBOOT		1
 #define FLASHROM_TYPE_BIOS		2
 #define FLASHROM_TYPE_PXE_BIOS		3
 #define FLASHROM_TYPE_FCOE_BIOS		8
@@ -234,9 +239,11 @@
 
 #define FLASHROM_OPER_FLASH		1
 #define FLASHROM_OPER_SAVE		2
+#define FLASHROM_OPER_REPORT		4
 
 #define FLASH_IMAGE_MAX_SIZE            (1310720) /* Max firmware image size */
 #define FLASH_BIOS_IMAGE_MAX_SIZE       (262144)  /* Max OPTION ROM image sz */
+#define FLASH_REDBOOT_IMAGE_MAX_SIZE    (262144)  /* Max redboot image sz */
 
 /* Offsets for components on Flash. */
 #define FLASH_iSCSI_PRIMARY_IMAGE_START (1048576)
@@ -246,6 +253,8 @@
 #define FLASH_iSCSI_BIOS_START          (7340032)
 #define FLASH_PXE_BIOS_START            (7864320)
 #define FLASH_FCoE_BIOS_START           (524288)
+#define FLASH_REDBOOT_START		(32768)
+#define FLASH_REDBOOT_ISM_START		(0)
 
 struct controller_id {
 	u32 vendor;
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 876b357..957a0f7 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -31,8 +31,10 @@
 
 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -123,6 +125,9 @@
 	struct sockaddr *addr = p;
 	int status = 0;
 
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
 	status = be_cmd_pmac_del(adapter, adapter->if_handle, adapter->pmac_id);
 	if (status)
 		return status;
@@ -141,7 +146,7 @@
 	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
 	struct be_port_rxf_stats *port_stats =
 			&rxf_stats->port[adapter->port_num];
-	struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+	struct net_device_stats *dev_stats = &adapter->netdev->stats;
 	struct be_erx_stats *erx_stats = &hw_stats->erx;
 
 	dev_stats->rx_packets = port_stats->rx_total_frames;
@@ -168,7 +173,8 @@
 		port_stats->rx_udp_checksum_errs;
 
 	/*  no space in linux buffers: best possible approximation */
-	dev_stats->rx_dropped = erx_stats->rx_drops_no_fragments[0];
+	dev_stats->rx_dropped =
+		erx_stats->rx_drops_no_fragments[adapter->rx_obj.q.id];
 
 	/* detailed rx errors */
 	dev_stats->rx_length_errors = port_stats->rx_in_range_errors +
@@ -214,6 +220,7 @@
 
 	/* If link came up or went down */
 	if (adapter->link_up != link_up) {
+		adapter->link_speed = -1;
 		if (link_up) {
 			netif_start_queue(netdev);
 			netif_carrier_on(netdev);
@@ -269,9 +276,7 @@
 
 static struct net_device_stats *be_get_stats(struct net_device *dev)
 {
-	struct be_adapter *adapter = netdev_priv(dev);
-
-	return &adapter->stats.net_stats;
+	return &dev->stats;
 }
 
 static u32 be_calc_rate(u64 bytes, unsigned long ticks)
@@ -389,15 +394,11 @@
 	atomic_add(wrb_cnt, &txq->used);
 	queue_head_inc(txq);
 
-	if (skb_dma_map(&pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&pdev->dev, "TX DMA mapping failed\n");
-		return 0;
-	}
-
 	if (skb->len > skb->data_len) {
 		int len = skb->len - skb->data_len;
+		busaddr = pci_map_single(pdev, skb->data, len,
+					 PCI_DMA_TODEVICE);
 		wrb = queue_head_node(txq);
-		busaddr = skb_shinfo(skb)->dma_head;
 		wrb_fill(wrb, busaddr, len);
 		be_dws_cpu_to_le(wrb, sizeof(*wrb));
 		queue_head_inc(txq);
@@ -407,8 +408,9 @@
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 		struct skb_frag_struct *frag =
 			&skb_shinfo(skb)->frags[i];
-
-		busaddr = skb_shinfo(skb)->dma_maps[i];
+		busaddr = pci_map_page(pdev, frag->page,
+				       frag->page_offset,
+				       frag->size, PCI_DMA_TODEVICE);
 		wrb = queue_head_node(txq);
 		wrb_fill(wrb, busaddr, frag->size);
 		be_dws_cpu_to_le(wrb, sizeof(*wrb));
@@ -562,13 +564,15 @@
 		be_cmd_promiscuous_config(adapter, adapter->port_num, 0);
 	}
 
-	if (netdev->flags & IFF_ALLMULTI) {
-		be_cmd_multicast_set(adapter, adapter->if_handle, NULL, 0);
+	/* Enable multicast promisc if num configured exceeds what we support */
+	if (netdev->flags & IFF_ALLMULTI || netdev->mc_count > BE_MAX_MC) {
+		be_cmd_multicast_set(adapter, adapter->if_handle, NULL, 0,
+				&adapter->mc_cmd_mem);
 		goto done;
 	}
 
 	be_cmd_multicast_set(adapter, adapter->if_handle, netdev->mc_list,
-		netdev->mc_count);
+		netdev->mc_count, &adapter->mc_cmd_mem);
 done:
 	return;
 }
@@ -758,7 +762,7 @@
 	if ((adapter->cap == 0x400) && !vtm)
 		vlanf = 0;
 
-	skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
+	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
 	if (!skb) {
 		if (net_ratelimit())
 			dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
@@ -766,8 +770,6 @@
 		return;
 	}
 
-	skb_reserve(skb, NET_IP_ALIGN);
-
 	skb_fill_rx_data(adapter, skb, rxcp);
 
 	if (do_pkt_csum(rxcp, adapter->rx_csum))
@@ -981,23 +983,41 @@
 static void be_tx_compl_process(struct be_adapter *adapter, u16 last_index)
 {
 	struct be_queue_info *txq = &adapter->tx_obj.q;
+	struct be_eth_wrb *wrb;
 	struct sk_buff **sent_skbs = adapter->tx_obj.sent_skb_list;
 	struct sk_buff *sent_skb;
+	u64 busaddr;
 	u16 cur_index, num_wrbs = 0;
 
 	cur_index = txq->tail;
 	sent_skb = sent_skbs[cur_index];
 	BUG_ON(!sent_skb);
 	sent_skbs[cur_index] = NULL;
+	wrb = queue_tail_node(txq);
+	be_dws_le_to_cpu(wrb, sizeof(*wrb));
+	busaddr = ((u64)wrb->frag_pa_hi << 32) | (u64)wrb->frag_pa_lo;
+	if (busaddr != 0) {
+		pci_unmap_single(adapter->pdev, busaddr,
+				 wrb->frag_len, PCI_DMA_TODEVICE);
+	}
+	num_wrbs++;
+	queue_tail_inc(txq);
 
-	do {
+	while (cur_index != last_index) {
 		cur_index = txq->tail;
+		wrb = queue_tail_node(txq);
+		be_dws_le_to_cpu(wrb, sizeof(*wrb));
+		busaddr = ((u64)wrb->frag_pa_hi << 32) | (u64)wrb->frag_pa_lo;
+		if (busaddr != 0) {
+			pci_unmap_page(adapter->pdev, busaddr,
+				       wrb->frag_len, PCI_DMA_TODEVICE);
+		}
 		num_wrbs++;
 		queue_tail_inc(txq);
-	} while (cur_index != last_index);
+	}
 
 	atomic_sub(num_wrbs, &txq->used);
-	skb_dma_unmap(&adapter->pdev->dev, sent_skb, DMA_TO_DEVICE);
+
 	kfree_skb(sent_skb);
 }
 
@@ -1377,6 +1397,7 @@
 	struct be_eth_rx_compl *rxcp;
 	u32 work_done;
 
+	adapter->stats.drvr_stats.be_rx_polls++;
 	for (work_done = 0; work_done < budget; work_done++) {
 		rxcp = be_rx_compl_get(adapter);
 		if (!rxcp)
@@ -1475,6 +1496,14 @@
 	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
 }
 
+static void be_msix_disable(struct be_adapter *adapter)
+{
+	if (adapter->msix_enabled) {
+		pci_disable_msix(adapter->pdev);
+		adapter->msix_enabled = false;
+	}
+}
+
 static void be_msix_enable(struct be_adapter *adapter)
 {
 	int i, status;
@@ -1590,6 +1619,8 @@
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
 	bool link_up;
 	int status;
+	u8 mac_speed;
+	u16 link_speed;
 
 	/* First time posting */
 	be_post_rx_frags(adapter);
@@ -1608,7 +1639,8 @@
 	/* Rx compl queue may be in unarmed state; rearm it */
 	be_cq_notify(adapter, adapter->rx_obj.cq.id, true, 0);
 
-	status = be_cmd_link_status_query(adapter, &link_up);
+	status = be_cmd_link_status_query(adapter, &link_up, &mac_speed,
+			&link_speed);
 	if (status)
 		goto ret_sts;
 	be_link_status_update(adapter, link_up);
@@ -1627,6 +1659,44 @@
 	return status;
 }
 
+static int be_setup_wol(struct be_adapter *adapter, bool enable)
+{
+	struct be_dma_mem cmd;
+	int status = 0;
+	u8 mac[ETH_ALEN];
+
+	memset(mac, 0, ETH_ALEN);
+
+	cmd.size = sizeof(struct be_cmd_req_acpi_wol_magic_config);
+	cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+	if (cmd.va == NULL)
+		return -1;
+	memset(cmd.va, 0, cmd.size);
+
+	if (enable) {
+		status = pci_write_config_dword(adapter->pdev,
+			PCICFG_PM_CONTROL_OFFSET, PCICFG_PM_CONTROL_MASK);
+		if (status) {
+			dev_err(&adapter->pdev->dev,
+				"Could not enable Wake-on-lan \n");
+			pci_free_consistent(adapter->pdev, cmd.size, cmd.va,
+					cmd.dma);
+			return status;
+		}
+		status = be_cmd_enable_magic_wol(adapter,
+				adapter->netdev->dev_addr, &cmd);
+		pci_enable_wake(adapter->pdev, PCI_D3hot, 1);
+		pci_enable_wake(adapter->pdev, PCI_D3cold, 1);
+	} else {
+		status = be_cmd_enable_magic_wol(adapter, mac, &cmd);
+		pci_enable_wake(adapter->pdev, PCI_D3hot, 0);
+		pci_enable_wake(adapter->pdev, PCI_D3cold, 0);
+	}
+
+	pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+	return status;
+}
+
 static int be_setup(struct be_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
@@ -1658,6 +1728,8 @@
 	if (status != 0)
 		goto rx_qs_destroy;
 
+	adapter->link_speed = -1;
+
 	return 0;
 
 rx_qs_destroy:
@@ -1678,6 +1750,8 @@
 
 	be_cmd_if_destroy(adapter, adapter->if_handle);
 
+	/* tell fw we're done with firing cmds */
+	be_cmd_fw_clean(adapter);
 	return 0;
 }
 
@@ -1720,6 +1794,31 @@
 #define FW_FILE_HDR_SIGN 	"ServerEngines Corp. "
 char flash_cookie[2][16] =	{"*** SE FLAS",
 				"H DIRECTORY *** "};
+
+static bool be_flash_redboot(struct be_adapter *adapter,
+			const u8 *p)
+{
+	u32 crc_offset;
+	u8 flashed_crc[4];
+	int status;
+	crc_offset = FLASH_REDBOOT_START + FLASH_REDBOOT_IMAGE_MAX_SIZE - 4
+			+ sizeof(struct flash_file_hdr) - 32*1024;
+	p += crc_offset;
+	status = be_cmd_get_flash_crc(adapter, flashed_crc);
+	if (status) {
+		dev_err(&adapter->pdev->dev,
+		"could not get crc from flash, not flashing redboot\n");
+		return false;
+	}
+
+	/*update redboot only if crc does not match*/
+	if (!memcmp(flashed_crc, p, 4))
+		return false;
+	else
+		return true;
+
+}
+
 static int be_flash_image(struct be_adapter *adapter,
 			const struct firmware *fw,
 			struct be_dma_mem *flash_cmd, u32 flash_type)
@@ -1759,6 +1858,12 @@
 		image_offset = FLASH_PXE_BIOS_START;
 		image_size = FLASH_BIOS_IMAGE_MAX_SIZE;
 		break;
+	case FLASHROM_TYPE_REDBOOT:
+		if (!be_flash_redboot(adapter, fw->data))
+			return 0;
+		image_offset = FLASH_REDBOOT_ISM_START;
+		image_size = FLASH_REDBOOT_IMAGE_MAX_SIZE;
+		break;
 	default:
 		return 0;
 	}
@@ -1906,6 +2011,8 @@
 		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_HW_CSUM |
 		NETIF_F_GRO;
 
+	netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_HW_CSUM;
+
 	netdev->flags |= IFF_MULTICAST;
 
 	adapter->rx_csum = true;
@@ -1977,34 +2084,61 @@
 	if (mem->va)
 		pci_free_consistent(adapter->pdev, mem->size,
 			mem->va, mem->dma);
+
+	mem = &adapter->mc_cmd_mem;
+	if (mem->va)
+		pci_free_consistent(adapter->pdev, mem->size,
+			mem->va, mem->dma);
 }
 
 static int be_ctrl_init(struct be_adapter *adapter)
 {
 	struct be_dma_mem *mbox_mem_alloc = &adapter->mbox_mem_alloced;
 	struct be_dma_mem *mbox_mem_align = &adapter->mbox_mem;
+	struct be_dma_mem *mc_cmd_mem = &adapter->mc_cmd_mem;
 	int status;
 
 	status = be_map_pci_bars(adapter);
 	if (status)
-		return status;
+		goto done;
 
 	mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
 	mbox_mem_alloc->va = pci_alloc_consistent(adapter->pdev,
 				mbox_mem_alloc->size, &mbox_mem_alloc->dma);
 	if (!mbox_mem_alloc->va) {
-		be_unmap_pci_bars(adapter);
-		return -1;
+		status = -ENOMEM;
+		goto unmap_pci_bars;
 	}
+
 	mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
 	mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
 	mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
 	memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
+
+	mc_cmd_mem->size = sizeof(struct be_cmd_req_mcast_mac_config);
+	mc_cmd_mem->va = pci_alloc_consistent(adapter->pdev, mc_cmd_mem->size,
+			&mc_cmd_mem->dma);
+	if (mc_cmd_mem->va == NULL) {
+		status = -ENOMEM;
+		goto free_mbox;
+	}
+	memset(mc_cmd_mem->va, 0, mc_cmd_mem->size);
+
 	spin_lock_init(&adapter->mbox_lock);
 	spin_lock_init(&adapter->mcc_lock);
 	spin_lock_init(&adapter->mcc_cq_lock);
 
 	return 0;
+
+free_mbox:
+	pci_free_consistent(adapter->pdev, mbox_mem_alloc->size,
+		mbox_mem_alloc->va, mbox_mem_alloc->dma);
+
+unmap_pci_bars:
+	be_unmap_pci_bars(adapter);
+
+done:
+	return status;
 }
 
 static void be_stats_cleanup(struct be_adapter *adapter)
@@ -2032,6 +2166,7 @@
 static void __devexit be_remove(struct pci_dev *pdev)
 {
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
+
 	if (!adapter)
 		return;
 
@@ -2043,10 +2178,7 @@
 
 	be_ctrl_cleanup(adapter);
 
-	if (adapter->msix_enabled) {
-		pci_disable_msix(adapter->pdev);
-		adapter->msix_enabled = false;
-	}
+	be_msix_disable(adapter);
 
 	pci_set_drvdata(pdev, NULL);
 	pci_release_regions(pdev);
@@ -2055,17 +2187,10 @@
 	free_netdev(adapter->netdev);
 }
 
-static int be_hw_up(struct be_adapter *adapter)
+static int be_get_config(struct be_adapter *adapter)
 {
 	int status;
-
-	status = be_cmd_POST(adapter);
-	if (status)
-		return status;
-
-	status = be_cmd_reset_function(adapter);
-	if (status)
-		return status;
+	u8 mac[ETH_ALEN];
 
 	status = be_cmd_get_fw_ver(adapter, adapter->fw_ver);
 	if (status)
@@ -2073,7 +2198,22 @@
 
 	status = be_cmd_query_fw_cfg(adapter,
 				&adapter->port_num, &adapter->cap);
-	return status;
+	if (status)
+		return status;
+
+	memset(mac, 0, ETH_ALEN);
+	status = be_cmd_mac_addr_query(adapter, mac,
+			MAC_ADDRESS_TYPE_NETWORK, true /*permanent */, 0);
+	if (status)
+		return status;
+
+	if (!is_valid_ether_addr(mac))
+		return -EADDRNOTAVAIL;
+
+	memcpy(adapter->netdev->dev_addr, mac, ETH_ALEN);
+	memcpy(adapter->netdev->perm_addr, mac, ETH_ALEN);
+
+	return 0;
 }
 
 static int __devinit be_probe(struct pci_dev *pdev,
@@ -2082,7 +2222,6 @@
 	int status = 0;
 	struct be_adapter *adapter;
 	struct net_device *netdev;
-	u8 mac[ETH_ALEN];
 
 	status = pci_enable_device(pdev);
 	if (status)
@@ -2102,6 +2241,8 @@
 	adapter->pdev = pdev;
 	pci_set_drvdata(pdev, adapter);
 	adapter->netdev = netdev;
+	be_netdev_init(netdev);
+	SET_NETDEV_DEV(netdev, &pdev->dev);
 
 	be_msix_enable(adapter);
 
@@ -2120,27 +2261,34 @@
 	if (status)
 		goto free_netdev;
 
+	/* sync up with fw's ready state */
+	status = be_cmd_POST(adapter);
+	if (status)
+		goto ctrl_clean;
+
+	/* tell fw we're ready to fire cmds */
+	status = be_cmd_fw_init(adapter);
+	if (status)
+		goto ctrl_clean;
+
+	status = be_cmd_reset_function(adapter);
+	if (status)
+		goto ctrl_clean;
+
 	status = be_stats_init(adapter);
 	if (status)
 		goto ctrl_clean;
 
-	status = be_hw_up(adapter);
+	status = be_get_config(adapter);
 	if (status)
 		goto stats_clean;
 
-	status = be_cmd_mac_addr_query(adapter, mac, MAC_ADDRESS_TYPE_NETWORK,
-			true /* permanent */, 0);
-	if (status)
-		goto stats_clean;
-	memcpy(netdev->dev_addr, mac, ETH_ALEN);
-
 	INIT_DELAYED_WORK(&adapter->work, be_worker);
-	be_netdev_init(netdev);
-	SET_NETDEV_DEV(netdev, &adapter->pdev->dev);
 
 	status = be_setup(adapter);
 	if (status)
 		goto stats_clean;
+
 	status = register_netdev(netdev);
 	if (status != 0)
 		goto unsetup;
@@ -2155,7 +2303,9 @@
 ctrl_clean:
 	be_ctrl_cleanup(adapter);
 free_netdev:
+	be_msix_disable(adapter);
 	free_netdev(adapter->netdev);
+	pci_set_drvdata(pdev, NULL);
 rel_reg:
 	pci_release_regions(pdev);
 disable_dev:
@@ -2170,6 +2320,9 @@
 	struct be_adapter *adapter = pci_get_drvdata(pdev);
 	struct net_device *netdev =  adapter->netdev;
 
+	if (adapter->wol)
+		be_setup_wol(adapter, true);
+
 	netif_device_detach(netdev);
 	if (netif_running(netdev)) {
 		rtnl_lock();
@@ -2200,6 +2353,11 @@
 	pci_set_power_state(pdev, 0);
 	pci_restore_state(pdev);
 
+	/* tell fw we're ready to fire cmds */
+	status = be_cmd_fw_init(adapter);
+	if (status)
+		return status;
+
 	be_setup(adapter);
 	if (netif_running(netdev)) {
 		rtnl_lock();
@@ -2207,6 +2365,9 @@
 		rtnl_unlock();
 	}
 	netif_device_attach(netdev);
+
+	if (adapter->wol)
+		be_setup_wol(adapter, false);
 	return 0;
 }
 
@@ -2221,8 +2382,8 @@
 
 static int __init be_init_module(void)
 {
-	if (rx_frag_size != 8192 && rx_frag_size != 4096
-		&& rx_frag_size != 2048) {
+	if (rx_frag_size != 8192 && rx_frag_size != 4096 &&
+	    rx_frag_size != 2048) {
 		printk(KERN_WARNING DRV_NAME
 			" : Module param rx_frag_size must be 2048/4096/8192."
 			" Using 2048\n");
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 14bd380..8ffea39 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -554,8 +554,8 @@
 {
 	int timeout_cnt = MAX_TIMEOUT_CNT;
 
-	if (tx_list_head->status.status_word != 0
-	    && current_tx_ptr != tx_list_head) {
+	if (tx_list_head->status.status_word != 0 &&
+	    current_tx_ptr != tx_list_head) {
 		goto adjust_head;	/* released something, just return; */
 	}
 
@@ -567,8 +567,8 @@
 	if (current_tx_ptr->next->next == tx_list_head) {
 		while (tx_list_head->status.status_word == 0) {
 			udelay(10);
-			if (tx_list_head->status.status_word != 0
-			    || !(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) {
+			if (tx_list_head->status.status_word != 0 ||
+			    !(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) {
 				goto adjust_head;
 			}
 			if (timeout_cnt-- < 0) {
@@ -596,8 +596,8 @@
 			       ": no sk_buff in a transmitted frame!\n");
 		}
 		tx_list_head = tx_list_head->next;
-	} while (tx_list_head->status.status_word != 0
-		 && current_tx_ptr != tx_list_head);
+	} while (tx_list_head->status.status_word != 0 &&
+		 current_tx_ptr != tx_list_head);
 	return;
 
 }
diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c
index 406f064..9b587c3 100644
--- a/drivers/net/bmac.c
+++ b/drivers/net/bmac.c
@@ -438,8 +438,8 @@
 
 		ctrl = bmac_mif_read(dev, 0);
 		capable = ((bmac_mif_read(dev, 1) & 0xf800) >> 6) | 1;
-		if (bmac_mif_read(dev, 4) != capable
-		    || (ctrl & 0x1000) == 0) {
+		if (bmac_mif_read(dev, 4) != capable ||
+		    (ctrl & 0x1000) == 0) {
 			bmac_mif_write(dev, 4, capable);
 			bmac_mif_write(dev, 0, 0x1200);
 		} else
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 08cddb6..4bfc808 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -59,8 +59,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"2.0.2"
-#define DRV_MODULE_RELDATE	"Aug 21, 2009"
+#define DRV_MODULE_VERSION	"2.0.3"
+#define DRV_MODULE_RELDATE	"Dec 03, 2009"
 #define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-5.0.0.j3.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-5.0.0.j3.fw"
 #define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-5.0.0.j3.fw"
@@ -1466,6 +1466,8 @@
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr |= BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED) {
@@ -1500,6 +1502,8 @@
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr &= ~BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED)
@@ -2811,13 +2815,21 @@
 			}
 		}
 
-		skb_dma_unmap(&bp->pdev->dev, skb, DMA_TO_DEVICE);
+		pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping),
+			skb_headlen(skb), PCI_DMA_TODEVICE);
 
 		tx_buf->skb = NULL;
 		last = tx_buf->nr_frags;
 
 		for (i = 0; i < last; i++) {
 			sw_cons = NEXT_TX_BD(sw_cons);
+
+			pci_unmap_page(bp->pdev,
+				pci_unmap_addr(
+					&txr->tx_buf_ring[TX_RING_IDX(sw_cons)],
+					mapping),
+				skb_shinfo(skb)->frags[i].size,
+				PCI_DMA_TODEVICE);
 		}
 
 		sw_cons = NEXT_TX_BD(sw_cons);
@@ -5146,8 +5158,12 @@
 
 	ring_prod = prod = rxr->rx_pg_prod;
 	for (i = 0; i < bp->rx_pg_ring_size; i++) {
-		if (bnx2_alloc_rx_page(bp, rxr, ring_prod) < 0)
+		if (bnx2_alloc_rx_page(bp, rxr, ring_prod) < 0) {
+			printk(KERN_WARNING PFX "%s: init'ed rx page ring %d "
+						"with %d/%d pages only\n",
+			       bp->dev->name, ring_num, i, bp->rx_pg_ring_size);
 			break;
+		}
 		prod = NEXT_RX_BD(prod);
 		ring_prod = RX_PG_RING_IDX(prod);
 	}
@@ -5155,8 +5171,12 @@
 
 	ring_prod = prod = rxr->rx_prod;
 	for (i = 0; i < bp->rx_ring_size; i++) {
-		if (bnx2_alloc_rx_skb(bp, rxr, ring_prod) < 0)
+		if (bnx2_alloc_rx_skb(bp, rxr, ring_prod) < 0) {
+			printk(KERN_WARNING PFX "%s: init'ed rx ring %d with "
+						"%d/%d skbs only\n",
+			       bp->dev->name, ring_num, i, bp->rx_ring_size);
 			break;
+		}
 		prod = NEXT_RX_BD(prod);
 		ring_prod = RX_RING_IDX(prod);
 	}
@@ -5291,17 +5311,29 @@
 		for (j = 0; j < TX_DESC_CNT; ) {
 			struct sw_tx_bd *tx_buf = &txr->tx_buf_ring[j];
 			struct sk_buff *skb = tx_buf->skb;
+			int k, last;
 
 			if (skb == NULL) {
 				j++;
 				continue;
 			}
 
-			skb_dma_unmap(&bp->pdev->dev, skb, DMA_TO_DEVICE);
+			pci_unmap_single(bp->pdev,
+					 pci_unmap_addr(tx_buf, mapping),
+					 skb_headlen(skb),
+					 PCI_DMA_TODEVICE);
 
 			tx_buf->skb = NULL;
 
-			j += skb_shinfo(skb)->nr_frags + 1;
+			last = tx_buf->nr_frags;
+			j++;
+			for (k = 0; k < last; k++, j++) {
+				tx_buf = &txr->tx_buf_ring[TX_RING_IDX(j)];
+				pci_unmap_page(bp->pdev,
+					pci_unmap_addr(tx_buf, mapping),
+					skb_shinfo(skb)->frags[k].size,
+					PCI_DMA_TODEVICE);
+			}
 			dev_kfree_skb(skb);
 		}
 	}
@@ -5680,11 +5712,12 @@
 	for (i = 14; i < pkt_size; i++)
 		packet[i] = (unsigned char) (i & 0xff);
 
-	if (skb_dma_map(&bp->pdev->dev, skb, DMA_TO_DEVICE)) {
+	map = pci_map_single(bp->pdev, skb->data, pkt_size,
+		PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(bp->pdev, map)) {
 		dev_kfree_skb(skb);
 		return -EIO;
 	}
-	map = skb_shinfo(skb)->dma_head;
 
 	REG_WR(bp, BNX2_HC_COMMAND,
 	       bp->hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
@@ -5719,7 +5752,7 @@
 
 	udelay(5);
 
-	skb_dma_unmap(&bp->pdev->dev, skb, DMA_TO_DEVICE);
+	pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE);
 	dev_kfree_skb(skb);
 
 	if (bnx2_get_hw_tx_cons(tx_napi) != txr->tx_prod)
@@ -6238,8 +6271,11 @@
 {
 	struct bnx2 *bp = container_of(work, struct bnx2, reset_task);
 
-	if (!netif_running(bp->dev))
+	rtnl_lock();
+	if (!netif_running(bp->dev)) {
+		rtnl_unlock();
 		return;
+	}
 
 	bnx2_netif_stop(bp);
 
@@ -6247,6 +6283,28 @@
 
 	atomic_set(&bp->intr_sem, 1);
 	bnx2_netif_start(bp);
+	rtnl_unlock();
+}
+
+static void
+bnx2_dump_state(struct bnx2 *bp)
+{
+	struct net_device *dev = bp->dev;
+
+	printk(KERN_ERR PFX "%s DEBUG: intr_sem[%x]\n", dev->name,
+		atomic_read(&bp->intr_sem));
+	printk(KERN_ERR PFX "%s DEBUG: EMAC_TX_STATUS[%08x] "
+			    "RPM_MGMT_PKT_CTRL[%08x]\n", dev->name,
+		REG_RD(bp, BNX2_EMAC_TX_STATUS),
+		REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL));
+	printk(KERN_ERR PFX "%s DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n",
+		dev->name, bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0),
+		bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1));
+	printk(KERN_ERR PFX "%s DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n",
+		dev->name, REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS));
+	if (bp->flags & BNX2_FLAG_USING_MSIX)
+		printk(KERN_ERR PFX "%s DEBUG: PBA[%08x]\n", dev->name,
+			REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE));
 }
 
 static void
@@ -6254,6 +6312,8 @@
 {
 	struct bnx2 *bp = netdev_priv(dev);
 
+	bnx2_dump_state(bp);
+
 	/* This allows the netif to be shutdown gracefully before resetting */
 	schedule_work(&bp->reset_task);
 }
@@ -6298,7 +6358,6 @@
 	struct bnx2_napi *bnapi;
 	struct bnx2_tx_ring_info *txr;
 	struct netdev_queue *txq;
-	struct skb_shared_info *sp;
 
 	/*  Determine which tx ring we will be placed on */
 	i = skb_get_queue_mapping(skb);
@@ -6363,16 +6422,15 @@
 	} else
 		mss = 0;
 
-	if (skb_dma_map(&bp->pdev->dev, skb, DMA_TO_DEVICE)) {
+	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(bp->pdev, mapping)) {
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
-	sp = skb_shinfo(skb);
-	mapping = sp->dma_head;
-
 	tx_buf = &txr->tx_buf_ring[ring_prod];
 	tx_buf->skb = skb;
+	pci_unmap_addr_set(tx_buf, mapping, mapping);
 
 	txbd = &txr->tx_desc_ring[ring_prod];
 
@@ -6393,7 +6451,12 @@
 		txbd = &txr->tx_desc_ring[ring_prod];
 
 		len = frag->size;
-		mapping = sp->dma_maps[i];
+		mapping = pci_map_page(bp->pdev, frag->page, frag->page_offset,
+			len, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(bp->pdev, mapping))
+			goto dma_error;
+		pci_unmap_addr_set(&txr->tx_buf_ring[ring_prod], mapping,
+				   mapping);
 
 		txbd->tx_bd_haddr_hi = (u64) mapping >> 32;
 		txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff;
@@ -6420,6 +6483,30 @@
 	}
 
 	return NETDEV_TX_OK;
+dma_error:
+	/* save value of frag that failed */
+	last_frag = i;
+
+	/* start back at beginning and unmap skb */
+	prod = txr->tx_prod;
+	ring_prod = TX_RING_IDX(prod);
+	tx_buf = &txr->tx_buf_ring[ring_prod];
+	tx_buf->skb = NULL;
+	pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping),
+			 skb_headlen(skb), PCI_DMA_TODEVICE);
+
+	/* unmap remaining mapped pages */
+	for (i = 0; i < last_frag; i++) {
+		prod = NEXT_TX_BD(prod);
+		ring_prod = TX_RING_IDX(prod);
+		tx_buf = &txr->tx_buf_ring[ring_prod];
+		pci_unmap_page(bp->pdev, pci_unmap_addr(tx_buf, mapping),
+			       skb_shinfo(skb)->frags[i].size,
+			       PCI_DMA_TODEVICE);
+	}
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 /* Called with rtnl_lock */
@@ -7635,6 +7722,86 @@
 
 }
 
+static void __devinit
+bnx2_read_vpd_fw_ver(struct bnx2 *bp)
+{
+	int rc, i, v0_len = 0;
+	u8 *data;
+	u8 *v0_str = NULL;
+	bool mn_match = false;
+
+#define BNX2_VPD_NVRAM_OFFSET	0x300
+#define BNX2_VPD_LEN		128
+#define BNX2_MAX_VER_SLEN	30
+
+	data = kmalloc(256, GFP_KERNEL);
+	if (!data)
+		return;
+
+	rc = bnx2_nvram_read(bp, BNX2_VPD_NVRAM_OFFSET, data + BNX2_VPD_LEN,
+			     BNX2_VPD_LEN);
+	if (rc)
+		goto vpd_done;
+
+	for (i = 0; i < BNX2_VPD_LEN; i += 4) {
+		data[i] = data[i + BNX2_VPD_LEN + 3];
+		data[i + 1] = data[i + BNX2_VPD_LEN + 2];
+		data[i + 2] = data[i + BNX2_VPD_LEN + 1];
+		data[i + 3] = data[i + BNX2_VPD_LEN];
+	}
+
+	for (i = 0; i <= BNX2_VPD_LEN - 3; ) {
+		unsigned char val = data[i];
+		unsigned int block_end;
+
+		if (val == 0x82 || val == 0x91) {
+			i = (i + 3 + (data[i + 1] + (data[i + 2] << 8)));
+			continue;
+		}
+
+		if (val != 0x90)
+			goto vpd_done;
+
+		block_end = (i + 3 + (data[i + 1] + (data[i + 2] << 8)));
+		i += 3;
+
+		if (block_end > BNX2_VPD_LEN)
+			goto vpd_done;
+
+		while (i < (block_end - 2)) {
+			int len = data[i + 2];
+
+			if (i + 3 + len > block_end)
+				goto vpd_done;
+
+			if (data[i] == 'M' && data[i + 1] == 'N') {
+				if (len != 4 ||
+				    memcmp(&data[i + 3], "1028", 4))
+					goto vpd_done;
+				mn_match = true;
+
+			} else if (data[i] == 'V' && data[i + 1] == '0') {
+				if (len > BNX2_MAX_VER_SLEN)
+					goto vpd_done;
+
+				v0_len = len;
+				v0_str = &data[i + 3];
+			}
+			i += 3 + len;
+
+			if (mn_match && v0_str) {
+				memcpy(bp->fw_version, v0_str, v0_len);
+				bp->fw_version[v0_len] = ' ';
+				goto vpd_done;
+			}
+		}
+		goto vpd_done;
+	}
+
+vpd_done:
+	kfree(data);
+}
+
 static int __devinit
 bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 {
@@ -7808,10 +7975,18 @@
 		goto err_out_unmap;
 	}
 
+	bnx2_read_vpd_fw_ver(bp);
+
+	j = strlen(bp->fw_version);
 	reg = bnx2_shmem_rd(bp, BNX2_DEV_INFO_BC_REV);
-	for (i = 0, j = 0; i < 3; i++) {
+	for (i = 0; i < 3 && j < 24; i++) {
 		u8 num, k, skip0;
 
+		if (i == 0) {
+			bp->fw_version[j++] = 'b';
+			bp->fw_version[j++] = 'c';
+			bp->fw_version[j++] = ' ';
+		}
 		num = (u8) (reg >> (24 - (i * 8)));
 		for (k = 100, skip0 = 1; k >= 1; num %= k, k /= 10) {
 			if (num >= k || !skip0 || k == 1) {
@@ -7842,8 +8017,9 @@
 	    reg != BNX2_CONDITION_MFW_RUN_NONE) {
 		u32 addr = bnx2_shmem_rd(bp, BNX2_MFW_VER_PTR);
 
-		bp->fw_version[j++] = ' ';
-		for (i = 0; i < 3; i++) {
+		if (j < 32)
+			bp->fw_version[j++] = ' ';
+		for (i = 0; i < 3 && j < 28; i++) {
 			reg = bnx2_reg_rd_ind(bp, addr + i * 4);
 			reg = swab32(reg);
 			memcpy(&bp->fw_version[j], &reg, 4);
@@ -8264,6 +8440,7 @@
 	}
 	pci_set_master(pdev);
 	pci_restore_state(pdev);
+	pci_save_state(pdev);
 
 	if (netif_running(dev)) {
 		bnx2_set_power_state(bp, PCI_D0);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index a4d8340..939dc44 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6345,6 +6345,8 @@
 
 #define BNX2_MCP_ROM					0x00150000
 #define BNX2_MCP_SCRATCH				0x00160000
+#define BNX2_MCP_STATE_P1				 0x0016f9c8
+#define BNX2_MCP_STATE_P0				 0x0016fdc8
 
 #define BNX2_SHM_HDR_SIGNATURE				BNX2_MCP_SCRATCH
 #define BNX2_SHM_HDR_SIGNATURE_SIG_MASK			 0xffff0000
@@ -6559,6 +6561,7 @@
 
 struct sw_tx_bd {
 	struct sk_buff		*skb;
+	DECLARE_PCI_UNMAP_ADDR(mapping)
 	unsigned short		is_gso;
 	unsigned short		nr_frags;
 };
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index bbf8422..602ab86 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -24,6 +24,10 @@
 #define BCM_VLAN			1
 #endif
 
+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
 
 #define BNX2X_MULTI_QUEUE
 
@@ -255,9 +259,6 @@
 struct bnx2x_fastpath {
 
 	struct napi_struct	napi;
-
-	u8			is_rx_queue;
-
 	struct host_status_block *status_blk;
 	dma_addr_t		status_blk_mapping;
 
@@ -762,7 +763,11 @@
 			(offsetof(struct bnx2x_eth_stats, stat_name) / 4)
 
 
+#ifdef BCM_CNIC
+#define MAX_CONTEXT			15
+#else
 #define MAX_CONTEXT			16
+#endif
 
 union cdu_context {
 	struct eth_context eth;
@@ -811,13 +816,21 @@
 	struct bnx2x_fastpath	fp[MAX_CONTEXT];
 	void __iomem		*regview;
 	void __iomem		*doorbells;
+#ifdef BCM_CNIC
+#define BNX2X_DB_SIZE		(18*BCM_PAGE_SIZE)
+#else
 #define BNX2X_DB_SIZE		(16*BCM_PAGE_SIZE)
+#endif
 
 	struct net_device	*dev;
 	struct pci_dev		*pdev;
 
 	atomic_t		intr_sem;
+#ifdef BCM_CNIC
+	struct msix_entry	msix_table[MAX_CONTEXT+2];
+#else
 	struct msix_entry	msix_table[MAX_CONTEXT+1];
+#endif
 #define INT_MODE_INTx			1
 #define INT_MODE_MSI			2
 #define INT_MODE_MSIX			3
@@ -863,8 +876,8 @@
 
 	/* Flags for marking that there is a STAT_QUERY or
 	   SET_MAC ramrod pending */
-	u8			stats_pending;
-	u8			set_mac_pending;
+	int			stats_pending;
+	int			set_mac_pending;
 
 	/* End of fields used in the performance code paths */
 
@@ -884,6 +897,7 @@
 #define BP_NOMCP(bp)			(bp->flags & NO_MCP_FLAG)
 #define HW_VLAN_TX_FLAG			0x400
 #define HW_VLAN_RX_FLAG			0x800
+#define MF_FUNC_DIS			0x1000
 
 	int			func;
 #define BP_PORT(bp)			(bp->func % PORT_MAX)
@@ -891,6 +905,11 @@
 #define BP_E1HVN(bp)			(bp->func >> 1)
 #define BP_L_ID(bp)			(BP_E1HVN(bp) << 2)
 
+#ifdef BCM_CNIC
+#define BCM_CNIC_CID_START		16
+#define BCM_ISCSI_ETH_CL_ID		17
+#endif
+
 	int			pm_cap;
 	int			pcie_cap;
 	int			mrrs;
@@ -944,13 +963,11 @@
 #define BNX2X_STATE_CLOSING_WAIT4_HALT	0x4000
 #define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000
 #define BNX2X_STATE_CLOSING_WAIT4_UNLOAD 0x6000
-#define BNX2X_STATE_DISABLED		0xd000
 #define BNX2X_STATE_DIAG		0xe000
 #define BNX2X_STATE_ERROR		0xf000
 
 	int			multi_mode;
-	int			num_rx_queues;
-	int			num_tx_queues;
+	int			num_queues;
 
 	u32			rx_mode;
 #define BNX2X_RX_MODE_NONE		0
@@ -960,28 +977,51 @@
 #define BNX2X_MAX_MULTICAST		64
 #define BNX2X_MAX_EMUL_MULTI		16
 
+	u32 			rx_mode_cl_mask;
+
 	dma_addr_t		def_status_blk_mapping;
 
 	struct bnx2x_slowpath	*slowpath;
 	dma_addr_t		slowpath_mapping;
 
-#ifdef BCM_ISCSI
-	void    		*t1;
-	dma_addr_t      	t1_mapping;
-	void    		*t2;
-	dma_addr_t      	t2_mapping;
-	void    		*timers;
-	dma_addr_t      	timers_mapping;
-	void    		*qm;
-	dma_addr_t      	qm_mapping;
-#endif
-
 	int			dropless_fc;
 
+#ifdef BCM_CNIC
+	u32			cnic_flags;
+#define BNX2X_CNIC_FLAG_MAC_SET		1
+
+	void			*t1;
+	dma_addr_t		t1_mapping;
+	void			*t2;
+	dma_addr_t		t2_mapping;
+	void			*timers;
+	dma_addr_t		timers_mapping;
+	void			*qm;
+	dma_addr_t		qm_mapping;
+	struct cnic_ops		*cnic_ops;
+	void			*cnic_data;
+	u32			cnic_tag;
+	struct cnic_eth_dev	cnic_eth_dev;
+	struct host_status_block *cnic_sb;
+	dma_addr_t		cnic_sb_mapping;
+#define CNIC_SB_ID(bp)			BP_L_ID(bp)
+	struct eth_spe		*cnic_kwq;
+	struct eth_spe		*cnic_kwq_prod;
+	struct eth_spe		*cnic_kwq_cons;
+	struct eth_spe		*cnic_kwq_last;
+	u16			cnic_kwq_pending;
+	u16			cnic_spq_pending;
+	struct mutex		cnic_mutex;
+	u8			iscsi_mac[6];
+#endif
+
 	int			dmae_ready;
 	/* used to synchronize dmae accesses */
 	struct mutex		dmae_mutex;
 
+	/* used to protect the FW mail box */
+	struct mutex		fw_mb_mutex;
+
 	/* used to synchronize stats collecting */
 	int			stats_state;
 	/* used by dmae command loader */
@@ -1030,20 +1070,15 @@
 };
 
 
-#define BNX2X_MAX_QUEUES(bp)	(IS_E1HMF(bp) ? (MAX_CONTEXT/(2 * E1HVN_MAX)) \
-					      : (MAX_CONTEXT/2))
-#define BNX2X_NUM_QUEUES(bp)	(bp->num_rx_queues + bp->num_tx_queues)
-#define is_multi(bp)		(BNX2X_NUM_QUEUES(bp) > 2)
+#define BNX2X_MAX_QUEUES(bp)	(IS_E1HMF(bp) ? (MAX_CONTEXT/E1HVN_MAX) \
+					      : MAX_CONTEXT)
+#define BNX2X_NUM_QUEUES(bp)	(bp->num_queues)
+#define is_multi(bp)		(BNX2X_NUM_QUEUES(bp) > 1)
 
-#define for_each_rx_queue(bp, var) \
-			for (var = 0; var < bp->num_rx_queues; var++)
-#define for_each_tx_queue(bp, var) \
-			for (var = bp->num_rx_queues; \
-			     var < BNX2X_NUM_QUEUES(bp); var++)
 #define for_each_queue(bp, var) \
 			for (var = 0; var < BNX2X_NUM_QUEUES(bp); var++)
 #define for_each_nondefault_queue(bp, var) \
-			for (var = 1; var < bp->num_rx_queues; var++)
+			for (var = 1; var < BNX2X_NUM_QUEUES(bp); var++)
 
 
 void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32);
@@ -1147,7 +1182,7 @@
 #define MAX_SP_DESC_CNT			(SP_DESC_CNT - 1)
 
 
-#define BNX2X_BTR			3
+#define BNX2X_BTR			1
 #define MAX_SPQ_PENDING			8
 
 
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 8e2261f..5258533 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -7,6 +7,20 @@
  * the Free Software Foundation.
  */
 
+struct license_key {
+	u32 reserved[6];
+
+#if defined(__BIG_ENDIAN)
+	u16 max_iscsi_init_conn;
+	u16 max_iscsi_trgt_conn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 max_iscsi_trgt_conn;
+	u16 max_iscsi_init_conn;
+#endif
+
+	u32 reserved_a[6];
+};
+
 
 #define PORT_0				0
 #define PORT_1				1
@@ -250,6 +264,7 @@
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101	    0x00000800
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727	    0x00000900
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC   0x00000a00
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823	    0x00000b00
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE	    0x0000fd00
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN	    0x0000ff00
 
@@ -881,7 +896,7 @@
 
 	struct shm_dev_info	dev_info;		 /* 0x8     (0x438) */
 
-	u8			reserved[52*PORT_MAX];
+	struct license_key	drv_lic_key[PORT_MAX];	/* 0x440 (52*2=0x68) */
 
 	/* FW information (for internal FW use) */
 	u32			fw_info_fio_offset;    /* 0x4a8       (0x4) */
@@ -1245,8 +1260,8 @@
 
 
 #define BCM_5710_FW_MAJOR_VERSION			5
-#define BCM_5710_FW_MINOR_VERSION			0
-#define BCM_5710_FW_REVISION_VERSION			21
+#define BCM_5710_FW_MINOR_VERSION			2
+#define BCM_5710_FW_REVISION_VERSION			7
 #define BCM_5710_FW_ENGINEERING_VERSION 		0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index e32d337..cf57789 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1107,18 +1107,21 @@
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
 			      &control2);
-
-
-	control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
-
-
+	if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
+	else
+		control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
+	DP(NETIF_MSG_LINK, "params->speed_cap_mask = 0x%x, control2 = 0x%x\n",
+		params->speed_cap_mask, control2);
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
 			      control2);
 
-	if (phy_flags & PHY_XGXS_FLAG) {
+	if ((phy_flags & PHY_XGXS_FLAG) &&
+	     (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
 		DP(NETIF_MSG_LINK, "XGXS\n");
 
 		CL45_WR_OVER_CL22(bp, params->port,
@@ -1225,7 +1228,7 @@
 				      params->phy_addr,
 				      MDIO_REG_BANK_CL73_USERB0,
 				    MDIO_CL73_USERB0_CL73_UCTRL,
-				    MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL);
+				      0xe);
 
 		/* Enable BAM Station Manager*/
 		CL45_WR_OVER_CL22(bp, params->port,
@@ -1236,29 +1239,25 @@
 			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
 			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);
 
-		/* Merge CL73 and CL37 aneg resolution */
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_USERB0,
-				      MDIO_CL73_USERB0_CL73_BAM_CTRL3,
-				      &reg_val);
-
-		if (params->speed_cap_mask &
-		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
-			/* Set the CL73 AN speed */
+		/* Advertise CL73 link speeds */
 			CL45_RD_OVER_CL22(bp, params->port,
 					      params->phy_addr,
 					      MDIO_REG_BANK_CL73_IEEEB1,
 					      MDIO_CL73_IEEEB1_AN_ADV2,
 					      &reg_val);
+		if (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
+		if (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
 
 			CL45_WR_OVER_CL22(bp, params->port,
 					      params->phy_addr,
 					      MDIO_REG_BANK_CL73_IEEEB1,
 					      MDIO_CL73_IEEEB1_AN_ADV2,
-			  reg_val | MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4);
+				      reg_val);
 
-		}
 		/* CL73 Autoneg Enabled */
 		reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
 
@@ -1351,6 +1350,7 @@
 
 static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc)
 {
+	struct bnx2x *bp = params->bp;
 	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 	/* resolve pause mode and advertisement
 	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
@@ -1380,18 +1380,30 @@
 		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
 		break;
 	}
+	DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
 }
 
 static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
 					   u16 ieee_fc)
 {
 	struct bnx2x *bp = params->bp;
+	u16 val;
 	/* for AN, we are always publishing full duplex */
 
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_COMBO_IEEE0,
 			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc);
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB1,
+			      MDIO_CL73_IEEEB1_AN_ADV1, &val);
+	val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH;
+	val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK);
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB1,
+			      MDIO_CL73_IEEEB1_AN_ADV1, val);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73)
@@ -1609,6 +1621,39 @@
 	return ret;
 }
 
+static u8 bnx2x_direct_parallel_detect_used(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 pd_10g, status2_1000x;
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+			      &status2_1000x);
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+			      &status2_1000x);
+	if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
+		DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n",
+			 params->port);
+		return 1;
+	}
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_10G_PARALLEL_DETECT,
+			      MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS,
+			      &pd_10g);
+
+	if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
+		DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n",
+			 params->port);
+		return 1;
+	}
+	return 0;
+}
 
 static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 				  struct link_vars *vars,
@@ -1627,21 +1672,53 @@
 	    (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
 	    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
 	     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_COMBO_IEEE0,
-				      MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
-				      &ld_pause);
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-			MDIO_REG_BANK_COMBO_IEEE0,
-			MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
-			&lp_pause);
-		pause_result = (ld_pause &
+		if (bnx2x_direct_parallel_detect_used(params)) {
+			vars->flow_ctrl = params->req_fc_auto_adv;
+			return;
+		}
+		if ((gp_status &
+		    (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
+		     MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) ==
+		    (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
+		     MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) {
+
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_CL73_IEEEB1,
+					      MDIO_CL73_IEEEB1_AN_ADV1,
+					      &ld_pause);
+			CL45_RD_OVER_CL22(bp, params->port,
+					     params->phy_addr,
+					     MDIO_REG_BANK_CL73_IEEEB1,
+					     MDIO_CL73_IEEEB1_AN_LP_ADV1,
+					     &lp_pause);
+			pause_result = (ld_pause &
+					MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK)
+					>> 8;
+			pause_result |= (lp_pause &
+					MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK)
+					>> 10;
+			DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n",
+				 pause_result);
+		} else {
+
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_COMBO_IEEE0,
+					      MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
+					      &ld_pause);
+			CL45_RD_OVER_CL22(bp, params->port,
+			       params->phy_addr,
+			       MDIO_REG_BANK_COMBO_IEEE0,
+			       MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
+			       &lp_pause);
+			pause_result = (ld_pause &
 				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
-		pause_result |= (lp_pause &
+			pause_result |= (lp_pause &
 				 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
-		DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+			DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n",
+				 pause_result);
+		}
 		bnx2x_pause_resolve(vars, pause_result);
 	} else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
 		   (bnx2x_ext_phy_resolve_fc(params, vars))) {
@@ -1853,6 +1930,8 @@
 		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
 		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
 		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
 		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) {
 			vars->autoneg = AUTO_NEG_ENABLED;
 
@@ -1987,8 +2066,7 @@
 		    GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
 		    mode);
 
-	bnx2x_set_led(bp, params->port, LED_MODE_OPER,
-		    line_speed, params->hw_led_mode, params->chip_id);
+	bnx2x_set_led(params, LED_MODE_OPER, line_speed);
 	return 0;
 }
 
@@ -2122,6 +2200,8 @@
 				       MDIO_PMA_REG_CTRL,
 				       1<<15);
 			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+			break;
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
 			DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n");
 			break;
@@ -2512,16 +2592,11 @@
 	/* Need to wait 100ms after reset */
 	msleep(100);
 
-	/* Set serial boot control for external load */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
-
 	/* Micro controller re-boot */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
-		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
+		       0x018B);
 
 	/* Set soft reset */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
@@ -2529,14 +2604,10 @@
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
-	/* Set PLL register value to be same like in P13 ver */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_PLL_CTRL,
-		       0x73A0);
+		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
 
-	/* Clear soft reset.
-	Will automatically reset micro-controller re-boot */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
@@ -3462,8 +3533,8 @@
 		       MDIO_PMA_REG_8481_LINK_SIGNAL,
 		       &val1);
 	/* Set bit 2 to 0, and bits [1:0] to 10 */
-	val1 &= ~((1<<0) | (1<<2)); /* Clear bits 0,2*/
-	val1 |= (1<<1); /* Set bit 1 */
+	val1 &= ~((1<<0) | (1<<2) | (1<<7)); /* Clear bits 0,2,7*/
+	val1 |= ((1<<1) | (1<<6)); /* Set bit 1, 6 */
 
 	bnx2x_cl45_write(bp, params->port,
 		       ext_phy_type,
@@ -3497,36 +3568,19 @@
 		       MDIO_PMA_REG_8481_LED2_MASK,
 		       0);
 
-	/* LED3 (10G/1G/100/10G Activity) */
-	bnx2x_cl45_read(bp, params->port,
-		      ext_phy_type,
-		      ext_phy_addr,
-		      MDIO_PMA_DEVAD,
-		      MDIO_PMA_REG_8481_LINK_SIGNAL,
-		      &val1);
-	/* Enable blink based on source 4(Activity) */
-	val1 &= ~((1<<7) | (1<<8)); /* Clear bits 7,8 */
-	val1 |= (1<<6); /* Set only bit 6 */
+	/* Unmask LED3 for 10G link */
 	bnx2x_cl45_write(bp, params->port,
 		       ext_phy_type,
 		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_8481_LINK_SIGNAL,
-		       val1);
-
-	bnx2x_cl45_read(bp, params->port,
-		      ext_phy_type,
-		      ext_phy_addr,
-		      MDIO_PMA_DEVAD,
 		      MDIO_PMA_REG_8481_LED3_MASK,
-		      &val1);
-	val1 |= (1<<4); /* Unmask LED3 for 10G link */
+		       0x6);
 	bnx2x_cl45_write(bp, params->port,
 		       ext_phy_type,
 		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_8481_LED3_MASK,
-		       val1);
+		       MDIO_PMA_REG_8481_LED3_BLINK,
+		       0);
 }
 
 
@@ -3544,7 +3598,10 @@
 			bnx2x_set_preemphasis(params);
 
 		/* forced speed requested? */
-		if (vars->line_speed != SPEED_AUTO_NEG) {
+		if (vars->line_speed != SPEED_AUTO_NEG ||
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+			  params->loopback_mode == LOOPBACK_EXT)) {
 			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
 
 			/* disable autoneg */
@@ -3693,19 +3750,6 @@
 				}
 			}
 			/* Force speed */
-			/* First enable LASI */
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_RX_ALARM_CTRL,
-				       0x0400);
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_LASI_CTRL, 0x0004);
-
 			if (params->req_line_speed == SPEED_10000) {
 				DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");
 
@@ -3715,6 +3759,9 @@
 					       MDIO_PMA_DEVAD,
 					       MDIO_PMA_REG_DIGITAL_CTRL,
 					       0x400);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 1);
 			} else {
 				/* Force 1Gbps using autoneg with 1G
 				advertisment */
@@ -3756,6 +3803,17 @@
 					       MDIO_AN_DEVAD,
 					       MDIO_AN_REG_CTRL,
 					       0x1200);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_RX_ALARM_CTRL,
+					       0x0400);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 0x0004);
 
 			}
 			bnx2x_save_bcm_spirom_ver(bp, params->port,
@@ -4291,6 +4349,7 @@
 			break;
 		}
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
 			/* This phy uses the NIG latch mechanism since link
 				indication arrives through its LED4 and not via
 				its LASI signal, so we get steady signal
@@ -4298,6 +4357,12 @@
 			bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
 				    1 << NIG_LATCH_BC_ENABLE_MI_INT);
 
+			bnx2x_cl45_write(bp, params->port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 0x0000);
+
 			bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr);
 			if (params->req_line_speed == SPEED_AUTO_NEG) {
 
@@ -4394,17 +4459,12 @@
 				    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
 					DP(NETIF_MSG_LINK, "Advertising 10G\n");
 					/* Restart autoneg for 10G*/
-			bnx2x_cl45_read(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_CTRL, &val);
-			val |= 0x200;
+
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CTRL, val);
+				       MDIO_AN_REG_CTRL, 0x3200);
 				}
 			} else {
 				/* Force speed */
@@ -4657,8 +4717,8 @@
 				      0xc809, &val1);
 
 			DP(NETIF_MSG_LINK, "8705 1.c809 val=0x%x\n", val1);
-			ext_phy_link_up = ((rx_sd & 0x1) && (val1 & (1<<9))
-					   && ((val1 & (1<<8)) == 0));
+			ext_phy_link_up = ((rx_sd & 0x1) && (val1 & (1<<9)) &&
+					   ((val1 & (1<<8)) == 0));
 			if (ext_phy_link_up)
 				vars->line_speed = SPEED_10000;
 			break;
@@ -5148,6 +5208,7 @@
 			}
 			break;
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
 			/* Check 10G-BaseT link status */
 			/* Check PMD signal ok */
 			bnx2x_cl45_read(bp, params->port, ext_phy_type,
@@ -5363,8 +5424,10 @@
 		     (NIG_STATUS_XGXS0_LINK10G |
 		      NIG_STATUS_XGXS0_LINK_STATUS |
 		      NIG_STATUS_SERDES0_LINK_STATUS));
-	if (XGXS_EXT_PHY_TYPE(params->ext_phy_config)
-	    == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) {
+	if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+		== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) ||
+	(XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+		== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) {
 		bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int);
 	}
 	if (vars->phy_link_up) {
@@ -5477,6 +5540,7 @@
 		status = bnx2x_format_ver(spirom_ver, version, len);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
 		spirom_ver = ((spirom_ver & 0xF80) >> 7) << 16 |
 			(spirom_ver & 0x7F);
 		status = bnx2x_format_ver(spirom_ver, version, len);
@@ -5728,13 +5792,15 @@
 }
 
 
-u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
-	       u16 hw_led_mode, u32 chip_id)
+u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed)
 {
+	u8 port = params->port;
+	u16 hw_led_mode = params->hw_led_mode;
 	u8 rc = 0;
 	u32 tmp;
 	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	struct bnx2x *bp = params->bp;
 	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
 	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
 		 speed, hw_led_mode);
@@ -5749,7 +5815,14 @@
 		break;
 
 	case LED_MODE_OPER:
-		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
+		if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
+			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+			REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+		} else {
+			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+				   hw_led_mode);
+		}
+
 		REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 +
 			   port*4, 0);
 		/* Set blinking rate to ~15.9Hz */
@@ -5761,7 +5834,7 @@
 		EMAC_WR(bp, EMAC_REG_EMAC_LED,
 			    (tmp & (~EMAC_LED_OVERRIDE)));
 
-		if (!CHIP_IS_E1H(bp) &&
+		if (CHIP_IS_E1(bp) &&
 		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||
 		     (speed == SPEED_100) ||
@@ -5864,6 +5937,7 @@
 
 	if (non_ext_phy ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
 	    (params->loopback_mode == LOOPBACK_EXT_PHY)) {
 		if (params->req_line_speed == SPEED_AUTO_NEG)
@@ -6030,10 +6104,7 @@
 		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
 			    params->port*4, 0);
 
-		bnx2x_set_led(bp, params->port, LED_MODE_OPER,
-			    vars->line_speed, params->hw_led_mode,
-			    params->chip_id);
-
+		bnx2x_set_led(params, LED_MODE_OPER, vars->line_speed);
 	} else
 	/* No loopback */
 	{
@@ -6091,15 +6162,13 @@
 {
 	struct bnx2x *bp = params->bp;
 	u32 ext_phy_config = params->ext_phy_config;
-	u16 hw_led_mode = params->hw_led_mode;
-	u32 chip_id = params->chip_id;
 	u8 port = params->port;
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
 	u32 val = REG_RD(bp, params->shmem_base +
 			     offsetof(struct shmem_region, dev_info.
 				      port_feature_config[params->port].
 				      config));
-
+	DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);
 	/* disable attentions */
 	vars->link_status = 0;
 	bnx2x_update_mng(params, vars->link_status);
@@ -6127,7 +6196,7 @@
 	 * Hold it as vars low
 	 */
 	 /* clear link led */
-	bnx2x_set_led(bp, port, LED_MODE_OFF, 0, hw_led_mode, chip_id);
+	bnx2x_set_led(params, LED_MODE_OFF, 0);
 	if (reset_ext_phy) {
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
@@ -6163,6 +6232,22 @@
 			bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr);
 			break;
 		}
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		{
+			u8 ext_phy_addr =
+				XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+			bnx2x_cl45_write(bp, port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CTRL, 0x0000);
+			bnx2x_cl45_write(bp, port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 1);
+			break;
+		}
 		default:
 			/* HW reset */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
@@ -6198,9 +6283,7 @@
 	u8 port = params->port;
 
 	DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
-	bnx2x_set_led(bp, port, LED_MODE_OFF,
-		    0, params->hw_led_mode,
-		    params->chip_id);
+	bnx2x_set_led(params, LED_MODE_OFF, 0);
 
 	/* indicate no mac active */
 	vars->mac_type = MAC_TYPE_NONE;
@@ -6237,15 +6320,13 @@
 	vars->link_status |= LINK_STATUS_LINK_UP;
 	if (link_10g) {
 		bnx2x_bmac_enable(params, vars, 0);
-		bnx2x_set_led(bp, port, LED_MODE_OPER,
-			    SPEED_10000, params->hw_led_mode,
-			    params->chip_id);
-
+		bnx2x_set_led(params, LED_MODE_OPER, SPEED_10000);
 	} else {
-		bnx2x_emac_enable(params, vars, 0);
 		rc = bnx2x_emac_program(params, vars->line_speed,
 				      vars->duplex);
 
+		bnx2x_emac_enable(params, vars, 0);
+
 		/* AN complete? */
 		if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
 			if (!(vars->phy_flags &
@@ -6343,6 +6424,7 @@
 
 	if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
 	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) &&
 	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) &&
 	    (ext_phy_link_up && !vars->phy_link_up))
 		bnx2x_init_internal_phy(params, vars, 0);
@@ -6578,6 +6660,13 @@
 	return 0;
 }
 
+
+static u8 bnx2x_84823_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	/* HW reset */
+	bnx2x_ext_phy_hw_reset(bp, 1);
+	return 0;
+}
 u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
 {
 	u8 rc = 0;
@@ -6607,7 +6696,9 @@
 		/* GPIO1 affects both ports, so there's need to pull
 		it for single port alone */
 		rc = bnx2x_8726_common_init_phy(bp, shmem_base);
-
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		rc = bnx2x_84823_common_init_phy(bp, shmem_base);
 		break;
 	default:
 		DP(NETIF_MSG_LINK,
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index f3e2522..40c2981 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -178,8 +178,7 @@
    Basically, the CLC takes care of the led for the link, but in case one needs
    to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
-u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
-	       u16 hw_led_mode, u32 chip_id);
+u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed);
 #define LED_MODE_OFF	0
 #define LED_MODE_OPER 	2
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 20f0ed9..77ba135 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -49,6 +49,7 @@
 #include <linux/prefetch.h>
 #include <linux/zlib.h>
 #include <linux/io.h>
+#include <linux/stringify.h>
 
 
 #include "bnx2x.h"
@@ -56,15 +57,20 @@
 #include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.52.1"
-#define DRV_MODULE_RELDATE	"2009/08/12"
+#define DRV_MODULE_VERSION	"1.52.1-5"
+#define DRV_MODULE_RELDATE	"2009/11/09"
 #define BNX2X_BC_VER		0x040200
 
 #include <linux/firmware.h>
 #include "bnx2x_fw_file_hdr.h"
 /* FW files */
-#define FW_FILE_PREFIX_E1	"bnx2x-e1-"
-#define FW_FILE_PREFIX_E1H	"bnx2x-e1h-"
+#define FW_FILE_VERSION					\
+	__stringify(BCM_5710_FW_MAJOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_MINOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_REVISION_VERSION) "."	\
+	__stringify(BCM_5710_FW_ENGINEERING_VERSION)
+#define FW_FILE_NAME_E1		"bnx2x-e1-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E1H	"bnx2x-e1h-" FW_FILE_VERSION ".fw"
 
 /* Time in jiffies before concluding the transmitter is hung */
 #define TX_TIMEOUT		(5*HZ)
@@ -77,21 +83,18 @@
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_FIRMWARE(FW_FILE_NAME_E1);
+MODULE_FIRMWARE(FW_FILE_NAME_E1H);
 
 static int multi_mode = 1;
 module_param(multi_mode, int, 0);
 MODULE_PARM_DESC(multi_mode, " Multi queue mode "
 			     "(0 Disable; 1 Enable (default))");
 
-static int num_rx_queues;
-module_param(num_rx_queues, int, 0);
-MODULE_PARM_DESC(num_rx_queues, " Number of Rx queues for multi_mode=1"
-				" (default is half number of CPUs)");
-
-static int num_tx_queues;
-module_param(num_tx_queues, int, 0);
-MODULE_PARM_DESC(num_tx_queues, " Number of Tx queues for multi_mode=1"
-				" (default is half number of CPUs)");
+static int num_queues;
+module_param(num_queues, int, 0);
+MODULE_PARM_DESC(num_queues, " Number of queues for multi_mode=1"
+				" (default is as a number of CPUs)");
 
 static int disable_tpa;
 module_param(disable_tpa, int, 0);
@@ -550,7 +553,7 @@
 		  bp->def_att_idx, bp->attn_state, bp->spq_prod_idx);
 
 	/* Rx */
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		BNX2X_ERR("fp%d: rx_bd_prod(%x)  rx_bd_cons(%x)"
@@ -567,7 +570,7 @@
 	}
 
 	/* Tx */
-	for_each_tx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		BNX2X_ERR("fp%d: tx_pkt_prod(%x)  tx_pkt_cons(%x)"
@@ -582,7 +585,7 @@
 
 	/* Rings */
 	/* Rx */
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
@@ -616,7 +619,7 @@
 	}
 
 	/* Tx */
-	for_each_tx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
@@ -742,6 +745,9 @@
 	if (msix) {
 		synchronize_irq(bp->msix_table[0].vector);
 		offset = 1;
+#ifdef BCM_CNIC
+		offset++;
+#endif
 		for_each_queue(bp, i)
 			synchronize_irq(bp->msix_table[i + offset].vector);
 	} else
@@ -781,21 +787,13 @@
 	barrier();
 }
 
-static inline u16 bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
+static inline void bnx2x_update_fpsb_idx(struct bnx2x_fastpath *fp)
 {
 	struct host_status_block *fpsb = fp->status_blk;
-	u16 rc = 0;
 
 	barrier(); /* status block is written to by the chip */
-	if (fp->fp_c_idx != fpsb->c_status_block.status_block_index) {
-		fp->fp_c_idx = fpsb->c_status_block.status_block_index;
-		rc |= 1;
-	}
-	if (fp->fp_u_idx != fpsb->u_status_block.status_block_index) {
-		fp->fp_u_idx = fpsb->u_status_block.status_block_index;
-		rc |= 2;
-	}
-	return rc;
+	fp->fp_c_idx = fpsb->c_status_block.status_block_index;
+	fp->fp_u_idx = fpsb->u_status_block.status_block_index;
 }
 
 static u16 bnx2x_ack_int(struct bnx2x *bp)
@@ -835,6 +833,9 @@
 	u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons;
 	int nbd;
 
+	/* prefetch skb end pointer to speedup dev_kfree_skb() */
+	prefetch(&skb->end);
+
 	DP(BNX2X_MSG_OFF, "pkt_idx %d  buff @(%p)->skb %p\n",
 	   idx, tx_buf, skb);
 
@@ -879,7 +880,7 @@
 
 	/* release skb */
 	WARN_ON(!skb);
-	dev_kfree_skb_any(skb);
+	dev_kfree_skb(skb);
 	tx_buf->first_bd = 0;
 	tx_buf->skb = NULL;
 
@@ -909,19 +910,28 @@
 	return (s16)(fp->bp->tx_ring_size) - used;
 }
 
-static void bnx2x_tx_int(struct bnx2x_fastpath *fp)
+static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
+{
+	u16 hw_cons;
+
+	/* Tell compiler that status block fields can change */
+	barrier();
+	hw_cons = le16_to_cpu(*fp->tx_cons_sb);
+	return hw_cons != fp->tx_pkt_cons;
+}
+
+static int bnx2x_tx_int(struct bnx2x_fastpath *fp)
 {
 	struct bnx2x *bp = fp->bp;
 	struct netdev_queue *txq;
 	u16 hw_cons, sw_cons, bd_cons = fp->tx_bd_cons;
-	int done = 0;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
-		return;
+		return -1;
 #endif
 
-	txq = netdev_get_tx_queue(bp->dev, fp->index - bp->num_rx_queues);
+	txq = netdev_get_tx_queue(bp->dev, fp->index);
 	hw_cons = le16_to_cpu(*fp->tx_cons_sb);
 	sw_cons = fp->tx_pkt_cons;
 
@@ -942,7 +952,6 @@
 */
 		bd_cons = bnx2x_free_tx_pkt(bp, fp, pkt_cons);
 		sw_cons++;
-		done++;
 	}
 
 	fp->tx_pkt_cons = sw_cons;
@@ -964,8 +973,12 @@
 		    (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3))
 			netif_tx_wake_queue(txq);
 	}
+	return 0;
 }
 
+#ifdef BCM_CNIC
+static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid);
+#endif
 
 static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 			   union eth_rx_cqe *rr_cqe)
@@ -1022,16 +1035,24 @@
 		bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
 		break;
 
+#ifdef BCM_CNIC
+	case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_OPEN):
+		DP(NETIF_MSG_IFDOWN, "got delete ramrod for CID %d\n", cid);
+		bnx2x_cnic_cfc_comp(bp, cid);
+		break;
+#endif
 
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
 		DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
-		bp->set_mac_pending = 0;
+		bp->set_mac_pending--;
+		smp_wmb();
 		break;
 
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
-	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DISABLED):
 		DP(NETIF_MSG_IFDOWN, "got (un)set mac ramrod\n");
+		bp->set_mac_pending--;
+		smp_wmb();
 		break;
 
 	default:
@@ -1539,6 +1560,8 @@
 		} else {
 			rx_buf = &fp->rx_buf_ring[bd_cons];
 			skb = rx_buf->skb;
+			prefetch(skb);
+			prefetch((u8 *)skb + 256);
 			len = le16_to_cpu(cqe->fast_path_cqe.pkt_len);
 			pad = cqe->fast_path_cqe.placement_offset;
 
@@ -1720,27 +1743,13 @@
 	if (unlikely(bp->panic))
 		return IRQ_HANDLED;
 #endif
-	/* Handle Rx or Tx according to MSI-X vector */
-	if (fp->is_rx_queue) {
-		prefetch(fp->rx_cons_sb);
-		prefetch(&fp->status_blk->u_status_block.status_block_index);
 
-		napi_schedule(&bnx2x_fp(bp, fp->index, napi));
-
-	} else {
-		prefetch(fp->tx_cons_sb);
-		prefetch(&fp->status_blk->c_status_block.status_block_index);
-
-		bnx2x_update_fpsb_idx(fp);
-		rmb();
-		bnx2x_tx_int(fp);
-
-		/* Re-enable interrupts */
-		bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
-			     le16_to_cpu(fp->fp_u_idx), IGU_INT_NOP, 1);
-		bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
-			     le16_to_cpu(fp->fp_c_idx), IGU_INT_ENABLE, 1);
-	}
+	/* Handle Rx and Tx according to MSI-X vector */
+	prefetch(fp->rx_cons_sb);
+	prefetch(fp->tx_cons_sb);
+	prefetch(&fp->status_blk->u_status_block.status_block_index);
+	prefetch(&fp->status_blk->c_status_block.status_block_index);
+	napi_schedule(&bnx2x_fp(bp, fp->index, napi));
 
 	return IRQ_HANDLED;
 }
@@ -1775,35 +1784,32 @@
 
 		mask = 0x2 << fp->sb_id;
 		if (status & mask) {
-			/* Handle Rx or Tx according to SB id */
-			if (fp->is_rx_queue) {
-				prefetch(fp->rx_cons_sb);
-				prefetch(&fp->status_blk->u_status_block.
-							status_block_index);
-
-				napi_schedule(&bnx2x_fp(bp, fp->index, napi));
-
-			} else {
-				prefetch(fp->tx_cons_sb);
-				prefetch(&fp->status_blk->c_status_block.
-							status_block_index);
-
-				bnx2x_update_fpsb_idx(fp);
-				rmb();
-				bnx2x_tx_int(fp);
-
-				/* Re-enable interrupts */
-				bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
-					     le16_to_cpu(fp->fp_u_idx),
-					     IGU_INT_NOP, 1);
-				bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
-					     le16_to_cpu(fp->fp_c_idx),
-					     IGU_INT_ENABLE, 1);
-			}
+			/* Handle Rx and Tx according to SB id */
+			prefetch(fp->rx_cons_sb);
+			prefetch(&fp->status_blk->u_status_block.
+						status_block_index);
+			prefetch(fp->tx_cons_sb);
+			prefetch(&fp->status_blk->c_status_block.
+						status_block_index);
+			napi_schedule(&bnx2x_fp(bp, fp->index, napi));
 			status &= ~mask;
 		}
 	}
 
+#ifdef BCM_CNIC
+	mask = 0x2 << CNIC_SB_ID(bp);
+	if (status & (mask | 0x1)) {
+		struct cnic_ops *c_ops = NULL;
+
+		rcu_read_lock();
+		c_ops = rcu_dereference(bp->cnic_ops);
+		if (c_ops)
+			c_ops->cnic_handler(bp->cnic_data, NULL);
+		rcu_read_unlock();
+
+		status &= ~mask;
+	}
+#endif
 
 	if (unlikely(status & 0x1)) {
 		queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
@@ -2128,18 +2134,30 @@
 
 static void bnx2x_link_report(struct bnx2x *bp)
 {
-	if (bp->state == BNX2X_STATE_DISABLED) {
+	if (bp->flags & MF_FUNC_DIS) {
 		netif_carrier_off(bp->dev);
 		printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
 		return;
 	}
 
 	if (bp->link_vars.link_up) {
+		u16 line_speed;
+
 		if (bp->state == BNX2X_STATE_OPEN)
 			netif_carrier_on(bp->dev);
 		printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
 
-		printk("%d Mbps ", bp->link_vars.line_speed);
+		line_speed = bp->link_vars.line_speed;
+		if (IS_E1HMF(bp)) {
+			u16 vn_max_rate;
+
+			vn_max_rate =
+				((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
+				 FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
+			if (vn_max_rate < line_speed)
+				line_speed = vn_max_rate;
+		}
+		printk("%d Mbps ", line_speed);
 
 		if (bp->link_vars.duplex == DUPLEX_FULL)
 			printk("full duplex");
@@ -2304,8 +2322,14 @@
 	}
 
 	/* ... only if all min rates are zeros - disable fairness */
-	if (all_zero)
-		bp->vn_weight_sum = 0;
+	if (all_zero) {
+		bp->cmng.flags.cmng_enables &=
+					~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+		DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
+		   "  fairness will be disabled\n");
+	} else
+		bp->cmng.flags.cmng_enables |=
+					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
 }
 
 static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func)
@@ -2324,17 +2348,14 @@
 	} else {
 		vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
 				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
-		/* If fairness is enabled (not all min rates are zeroes) and
-		   if current min rate is zero - set it to 1.
-		   This is a requirement of the algorithm. */
-		if (bp->vn_weight_sum && (vn_min_rate == 0))
+		/* If min rate is zero - set it to 1 */
+		if (!vn_min_rate)
 			vn_min_rate = DEF_MIN_RATE;
 		vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
 				FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
 	}
-
 	DP(NETIF_MSG_IFUP,
-	   "func %d: vn_min_rate=%d  vn_max_rate=%d  vn_weight_sum=%d\n",
+	   "func %d: vn_min_rate %d  vn_max_rate %d  vn_weight_sum %d\n",
 	   func, vn_min_rate, vn_max_rate, bp->vn_weight_sum);
 
 	memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
@@ -2405,8 +2426,7 @@
 			memset(&(pstats->mac_stx[0]), 0,
 			       sizeof(struct mac_stx));
 		}
-		if ((bp->state == BNX2X_STATE_OPEN) ||
-		    (bp->state == BNX2X_STATE_DISABLED))
+		if (bp->state == BNX2X_STATE_OPEN)
 			bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
 	}
 
@@ -2449,9 +2469,7 @@
 
 static void bnx2x__link_status_update(struct bnx2x *bp)
 {
-	int func = BP_FUNC(bp);
-
-	if (bp->state != BNX2X_STATE_OPEN)
+	if ((bp->state != BNX2X_STATE_OPEN) || (bp->flags & MF_FUNC_DIS))
 		return;
 
 	bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
@@ -2461,7 +2479,6 @@
 	else
 		bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 	bnx2x_calc_vn_weight_sum(bp);
 
 	/* indicate link status */
@@ -2501,6 +2518,7 @@
 	u32 cnt = 1;
 	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
 
+	mutex_lock(&bp->fw_mb_mutex);
 	SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
 	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
@@ -2510,8 +2528,8 @@
 
 		rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
 
-		/* Give the FW up to 2 second (200*10ms) */
-	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+		/* Give the FW up to 5 second (500*10ms) */
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
 
 	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
 	   cnt*delay, rc, seq);
@@ -2525,32 +2543,23 @@
 		bnx2x_fw_dump(bp);
 		rc = 0;
 	}
+	mutex_unlock(&bp->fw_mb_mutex);
 
 	return rc;
 }
 
 static void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set);
+static void bnx2x_set_eth_mac_addr_e1h(struct bnx2x *bp, int set);
 static void bnx2x_set_rx_mode(struct net_device *dev);
 
 static void bnx2x_e1h_disable(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
-	int i;
-
-	bp->rx_mode = BNX2X_RX_MODE_NONE;
-	bnx2x_set_storm_rx_mode(bp);
 
 	netif_tx_disable(bp->dev);
-	bp->dev->trans_start = jiffies;	/* prevent tx timeout */
 
 	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
 
-	bnx2x_set_mac_addr_e1h(bp, 0);
-
-	for (i = 0; i < MC_HASH_SIZE; i++)
-		REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
-
 	netif_carrier_off(bp->dev);
 }
 
@@ -2560,13 +2569,13 @@
 
 	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
 
-	bnx2x_set_mac_addr_e1h(bp, 1);
-
 	/* Tx queue should be only reenabled */
 	netif_tx_wake_all_queues(bp->dev);
 
-	/* Initialize the receive filter. */
-	bnx2x_set_rx_mode(bp->dev);
+	/*
+	 * Should not call netif_carrier_on since it will be called if the link
+	 * is up when checking for link state
+	 */
 }
 
 static void bnx2x_update_min_max(struct bnx2x *bp)
@@ -2605,21 +2614,23 @@
 
 static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
 {
-	int func = BP_FUNC(bp);
-
 	DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
-	bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 
 	if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
 
+		/*
+		 * This is the only place besides the function initialization
+		 * where the bp->flags can change so it is done without any
+		 * locks
+		 */
 		if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
 			DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n");
-			bp->state = BNX2X_STATE_DISABLED;
+			bp->flags |= MF_FUNC_DIS;
 
 			bnx2x_e1h_disable(bp);
 		} else {
 			DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
-			bp->state = BNX2X_STATE_OPEN;
+			bp->flags &= ~MF_FUNC_DIS;
 
 			bnx2x_e1h_enable(bp);
 		}
@@ -2638,11 +2649,40 @@
 		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK);
 }
 
+/* must be called under the spq lock */
+static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
+{
+	struct eth_spe *next_spe = bp->spq_prod_bd;
+
+	if (bp->spq_prod_bd == bp->spq_last_bd) {
+		bp->spq_prod_bd = bp->spq;
+		bp->spq_prod_idx = 0;
+		DP(NETIF_MSG_TIMER, "end of spq\n");
+	} else {
+		bp->spq_prod_bd++;
+		bp->spq_prod_idx++;
+	}
+	return next_spe;
+}
+
+/* must be called under the spq lock */
+static inline void bnx2x_sp_prod_update(struct bnx2x *bp)
+{
+	int func = BP_FUNC(bp);
+
+	/* Make sure that BD data is updated before writing the producer */
+	wmb();
+
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
+	       bp->spq_prod_idx);
+	mmiowb();
+}
+
 /* the slow path queue is odd since completions arrive on the fastpath ring */
 static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 			 u32 data_hi, u32 data_lo, int common)
 {
-	int func = BP_FUNC(bp);
+	struct eth_spe *spe;
 
 	DP(BNX2X_MSG_SP/*NETIF_MSG_TIMER*/,
 	   "SPQE (%x:%x)  command %d  hw_cid %x  data (%x:%x)  left %x\n",
@@ -2664,38 +2704,23 @@
 		return -EBUSY;
 	}
 
+	spe = bnx2x_sp_get_next(bp);
+
 	/* CID needs port number to be encoded int it */
-	bp->spq_prod_bd->hdr.conn_and_cmd_data =
+	spe->hdr.conn_and_cmd_data =
 			cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
 				     HW_CID(bp, cid)));
-	bp->spq_prod_bd->hdr.type = cpu_to_le16(ETH_CONNECTION_TYPE);
+	spe->hdr.type = cpu_to_le16(ETH_CONNECTION_TYPE);
 	if (common)
-		bp->spq_prod_bd->hdr.type |=
+		spe->hdr.type |=
 			cpu_to_le16((1 << SPE_HDR_COMMON_RAMROD_SHIFT));
 
-	bp->spq_prod_bd->data.mac_config_addr.hi = cpu_to_le32(data_hi);
-	bp->spq_prod_bd->data.mac_config_addr.lo = cpu_to_le32(data_lo);
+	spe->data.mac_config_addr.hi = cpu_to_le32(data_hi);
+	spe->data.mac_config_addr.lo = cpu_to_le32(data_lo);
 
 	bp->spq_left--;
 
-	if (bp->spq_prod_bd == bp->spq_last_bd) {
-		bp->spq_prod_bd = bp->spq;
-		bp->spq_prod_idx = 0;
-		DP(NETIF_MSG_TIMER, "end of spq\n");
-
-	} else {
-		bp->spq_prod_bd++;
-		bp->spq_prod_idx++;
-	}
-
-	/* Make sure that BD data is updated before writing the producer */
-	wmb();
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
-	       bp->spq_prod_idx);
-
-	mmiowb();
-
+	bnx2x_sp_prod_update(bp);
 	spin_unlock_bh(&bp->spq_lock);
 	return 0;
 }
@@ -3024,6 +3049,8 @@
 			int func = BP_FUNC(bp);
 
 			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+			bp->mf_config = SHMEM_RD(bp,
+					   mf_cfg.func_mf_config[func].config);
 			val = SHMEM_RD(bp, func_mb[func].drv_status);
 			if (val & DRV_STATUS_DCC_EVENT_MASK)
 				bnx2x_dcc_event(bp,
@@ -3227,6 +3254,17 @@
 		return IRQ_HANDLED;
 #endif
 
+#ifdef BCM_CNIC
+	{
+		struct cnic_ops *c_ops;
+
+		rcu_read_lock();
+		c_ops = rcu_dereference(bp->cnic_ops);
+		if (c_ops)
+			c_ops->cnic_handler(bp->cnic_data, NULL);
+		rcu_read_unlock();
+	}
+#endif
 	queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
 	return IRQ_HANDLED;
@@ -3958,7 +3996,7 @@
 	estats->no_buff_discard_hi = 0;
 	estats->no_buff_discard_lo = 0;
 
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		int cl_id = fp->cl_id;
 		struct tstorm_per_client_stats *tclient =
@@ -4175,7 +4213,7 @@
 	nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi);
 
 	nstats->rx_dropped = estats->mac_discard;
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		nstats->rx_dropped +=
 			le32_to_cpu(bp->fp[i].old_tclient.checksum_discard);
 
@@ -4229,7 +4267,7 @@
 	estats->rx_err_discard_pkt = 0;
 	estats->rx_skb_alloc_failed = 0;
 	estats->hw_csum_err = 0;
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_eth_q_stats *qstats = &bp->fp[i].eth_q_stats;
 
 		estats->driver_xoff += qstats->driver_xoff;
@@ -4260,7 +4298,7 @@
 
 	if (bp->msglevel & NETIF_MSG_TIMER) {
 		struct bnx2x_fastpath *fp0_rx = bp->fp;
-		struct bnx2x_fastpath *fp0_tx = &(bp->fp[bp->num_rx_queues]);
+		struct bnx2x_fastpath *fp0_tx = bp->fp;
 		struct tstorm_per_client_stats *old_tclient =
 							&bp->fp->old_tclient;
 		struct bnx2x_eth_q_stats *qstats = &bp->fp->eth_q_stats;
@@ -4640,8 +4678,7 @@
 		}
 	}
 
-	if ((bp->state == BNX2X_STATE_OPEN) ||
-	    (bp->state == BNX2X_STATE_DISABLED))
+	if (bp->state == BNX2X_STATE_OPEN)
 		bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
 
 timer_restart:
@@ -4860,21 +4897,21 @@
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HC_TIMEOUT_U_OFFSET(port, sb_id,
 						      U_SB_ETH_RX_CQ_INDEX),
-			bp->rx_ticks/12);
+			bp->rx_ticks/(4 * BNX2X_BTR));
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_U_OFFSET(port, sb_id,
 						       U_SB_ETH_RX_CQ_INDEX),
-			 (bp->rx_ticks/12) ? 0 : 1);
+			 (bp->rx_ticks/(4 * BNX2X_BTR)) ? 0 : 1);
 
 		/* HC_INDEX_C_ETH_TX_CQ_CONS */
 		REG_WR8(bp, BAR_CSTRORM_INTMEM +
 			CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, sb_id,
 						      C_SB_ETH_TX_CQ_INDEX),
-			bp->tx_ticks/12);
+			bp->tx_ticks/(4 * BNX2X_BTR));
 		REG_WR16(bp, BAR_CSTRORM_INTMEM +
 			 CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id,
 						       C_SB_ETH_TX_CQ_INDEX),
-			 (bp->tx_ticks/12) ? 0 : 1);
+			 (bp->tx_ticks/(4 * BNX2X_BTR)) ? 0 : 1);
 	}
 }
 
@@ -4916,7 +4953,7 @@
 
 	if (bp->flags & TPA_ENABLE_FLAG) {
 
-		for_each_rx_queue(bp, j) {
+		for_each_queue(bp, j) {
 			struct bnx2x_fastpath *fp = &bp->fp[j];
 
 			for (i = 0; i < max_agg_queues; i++) {
@@ -4939,16 +4976,13 @@
 		}
 	}
 
-	for_each_rx_queue(bp, j) {
+	for_each_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		fp->rx_bd_cons = 0;
 		fp->rx_cons_sb = BNX2X_RX_SB_INDEX;
 		fp->rx_bd_cons_sb = BNX2X_RX_SB_BD_INDEX;
 
-		/* Mark queue as Rx */
-		fp->is_rx_queue = 1;
-
 		/* "next page" elements initialization */
 		/* SGE ring */
 		for (i = 1; i <= NUM_RX_SGE_PAGES; i++) {
@@ -5054,7 +5088,7 @@
 {
 	int i, j;
 
-	for_each_tx_queue(bp, j) {
+	for_each_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		for (i = 1; i <= NUM_TX_RINGS; i++) {
@@ -5080,10 +5114,6 @@
 		fp->tx_cons_sb = BNX2X_TX_SB_INDEX;
 		fp->tx_pkt = 0;
 	}
-
-	/* clean tx statistics */
-	for_each_rx_queue(bp, i)
-		bnx2x_fp(bp, i, tx_pkt) = 0;
 }
 
 static void bnx2x_init_sp_ring(struct bnx2x *bp)
@@ -5112,7 +5142,8 @@
 {
 	int i;
 
-	for_each_rx_queue(bp, i) {
+	/* Rx */
+	for_each_queue(bp, i) {
 		struct eth_context *context = bnx2x_sp(bp, context[i].eth);
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		u8 cl_id = fp->cl_id;
@@ -5164,10 +5195,11 @@
 					       ETH_CONNECTION_TYPE);
 	}
 
-	for_each_tx_queue(bp, i) {
+	/* Tx */
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		struct eth_context *context =
-			bnx2x_sp(bp, context[i - bp->num_rx_queues].eth);
+			bnx2x_sp(bp, context[i].eth);
 
 		context->cstorm_st_context.sb_index_number =
 						C_SB_ETH_TX_CQ_INDEX;
@@ -5195,7 +5227,7 @@
 	for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
 		REG_WR8(bp, BAR_TSTRORM_INTMEM +
 			TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
-			bp->fp->cl_id + (i % bp->num_rx_queues));
+			bp->fp->cl_id + (i % bp->num_queues));
 }
 
 static void bnx2x_set_client_config(struct bnx2x *bp)
@@ -5235,7 +5267,7 @@
 {
 	struct tstorm_eth_mac_filter_config tstorm_mac_filter = {0};
 	int mode = bp->rx_mode;
-	int mask = (1 << BP_L_ID(bp));
+	int mask = bp->rx_mode_cl_mask;
 	int func = BP_FUNC(bp);
 	int port = BP_PORT(bp);
 	int i;
@@ -5348,6 +5380,7 @@
 	       (*(u32 *)&tstorm_config));
 
 	bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
+	bp->rx_mode_cl_mask = (1 << BP_L_ID(bp));
 	bnx2x_set_storm_rx_mode(bp);
 
 	for_each_queue(bp, i) {
@@ -5438,7 +5471,7 @@
 		min((u32)(min((u32)8, (u32)MAX_SKB_FRAGS) *
 			  SGE_PAGE_SIZE * PAGES_PER_SGE),
 		    (u32)0xffff);
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		REG_WR(bp, BAR_USTRORM_INTMEM +
@@ -5473,7 +5506,7 @@
 		rx_pause.cqe_thr_high = 350;
 		rx_pause.sge_thr_high = 0;
 
-		for_each_rx_queue(bp, i) {
+		for_each_queue(bp, i) {
 			struct bnx2x_fastpath *fp = &bp->fp[i];
 
 			if (!fp->disable_tpa) {
@@ -5504,20 +5537,18 @@
 		bp->link_vars.line_speed = SPEED_10000;
 		bnx2x_init_port_minmax(bp);
 
+		if (!BP_NOMCP(bp))
+			bp->mf_config =
+			      SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 		bnx2x_calc_vn_weight_sum(bp);
 
 		for (vn = VN_0; vn < E1HVN_MAX; vn++)
 			bnx2x_init_vn_minmax(bp, 2*vn + port);
 
 		/* Enable rate shaping and fairness */
-		bp->cmng.flags.cmng_enables =
+		bp->cmng.flags.cmng_enables |=
 					CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
-		if (bp->vn_weight_sum)
-			bp->cmng.flags.cmng_enables |=
-					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
-		else
-			DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
-			   "  fairness will be disabled\n");
+
 	} else {
 		/* rate shaping and fairness are disabled */
 		DP(NETIF_MSG_IFUP,
@@ -5565,10 +5596,11 @@
 		fp->state = BNX2X_FP_STATE_CLOSED;
 		fp->index = i;
 		fp->cl_id = BP_L_ID(bp) + i;
+#ifdef BCM_CNIC
+		fp->sb_id = fp->cl_id + 1;
+#else
 		fp->sb_id = fp->cl_id;
-		/* Suitable Rx and Tx SBs are served by the same client */
-		if (i >= bp->num_rx_queues)
-			fp->cl_id -= bp->num_rx_queues;
+#endif
 		DP(NETIF_MSG_IFUP,
 		   "queue[%d]:  bnx2x_init_sb(%p,%p)  cl_id %d  sb %d\n",
 		   i, bp, fp->status_blk, fp->cl_id, fp->sb_id);
@@ -5867,7 +5899,7 @@
 	msleep(50);
 	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
 	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
-#ifndef BCM_ISCSI
+#ifndef BCM_CNIC
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 #endif
@@ -6006,6 +6038,9 @@
 static int bnx2x_init_common(struct bnx2x *bp)
 {
 	u32 val, i;
+#ifdef BCM_CNIC
+	u32 wb_write[2];
+#endif
 
 	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_FUNC(bp));
 
@@ -6048,7 +6083,7 @@
 #endif
 
 	REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
 	REG_WR(bp, PXP2_REG_RQ_QM_P_SIZE, 5);
 	REG_WR(bp, PXP2_REG_RQ_SRC_P_SIZE, 5);
@@ -6091,11 +6126,26 @@
 	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
 
 	bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
+
+#ifdef BCM_CNIC
+	wb_write[0] = 0;
+	wb_write[1] = 0;
+	for (i = 0; i < 64; i++) {
+		REG_WR(bp, QM_REG_BASEADDR + i*4, 1024 * 4 * (i%16));
+		bnx2x_init_ind_wr(bp, QM_REG_PTRTBL + i*8, wb_write, 2);
+
+		if (CHIP_IS_E1H(bp)) {
+			REG_WR(bp, QM_REG_BASEADDR_EXT_A + i*4, 1024*4*(i%16));
+			bnx2x_init_ind_wr(bp, QM_REG_PTRTBL_EXT_A + i*8,
+					  wb_write, 2);
+		}
+	}
+#endif
 	/* soft reset pulse */
 	REG_WR(bp, QM_REG_SOFT_RESET, 1);
 	REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
 #endif
 
@@ -6109,8 +6159,10 @@
 	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
 	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+#ifndef BCM_CNIC
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
+#endif
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
@@ -6145,6 +6197,18 @@
 		/* TODO: replace with something meaningful */
 	}
 	bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
+#ifdef BCM_CNIC
+	REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
+	REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
+	REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
+	REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
+	REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
+	REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
+	REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
+	REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
+	REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
+	REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
+#endif
 	REG_WR(bp, SRC_REG_SOFT_RST, 0);
 
 	if (sizeof(union cdu_context) != 1024)
@@ -6261,38 +6325,14 @@
 	bnx2x_init_block(bp, TCM_BLOCK, init_stage);
 	bnx2x_init_block(bp, UCM_BLOCK, init_stage);
 	bnx2x_init_block(bp, CCM_BLOCK, init_stage);
-#ifdef BCM_ISCSI
-	/* Port0  1
-	 * Port1  385 */
-	i++;
-	wb_write[0] = ONCHIP_ADDR1(bp->timers_mapping);
-	wb_write[1] = ONCHIP_ADDR2(bp->timers_mapping);
-	REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
-	REG_WR(bp, PXP2_REG_PSWRQ_TM0_L2P + func*4, PXP_ONE_ILT(i));
-
-	/* Port0  2
-	 * Port1  386 */
-	i++;
-	wb_write[0] = ONCHIP_ADDR1(bp->qm_mapping);
-	wb_write[1] = ONCHIP_ADDR2(bp->qm_mapping);
-	REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
-	REG_WR(bp, PXP2_REG_PSWRQ_QM0_L2P + func*4, PXP_ONE_ILT(i));
-
-	/* Port0  3
-	 * Port1  387 */
-	i++;
-	wb_write[0] = ONCHIP_ADDR1(bp->t1_mapping);
-	wb_write[1] = ONCHIP_ADDR2(bp->t1_mapping);
-	REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
-	REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
-#endif
 	bnx2x_init_block(bp, XCM_BLOCK, init_stage);
 
-#ifdef BCM_ISCSI
-	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
-	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
+#ifdef BCM_CNIC
+	REG_WR(bp, QM_REG_CONNNUM_0 + port*4, 1024/16 - 1);
 
 	bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
+	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
+	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
 #endif
 	bnx2x_init_block(bp, DQ_BLOCK, init_stage);
 
@@ -6350,18 +6390,8 @@
 	msleep(5);
 	REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
 
-#ifdef BCM_ISCSI
-	/* tell the searcher where the T2 table is */
-	REG_WR(bp, SRC_REG_COUNTFREE0 + func*4, 16*1024/64);
-
-	wb_write[0] = U64_LO(bp->t2_mapping);
-	wb_write[1] = U64_HI(bp->t2_mapping);
-	REG_WR_DMAE(bp, SRC_REG_FIRSTFREE0 + func*4, wb_write, 2);
-	wb_write[0] = U64_LO((u64)bp->t2_mapping + 16*1024 - 64);
-	wb_write[1] = U64_HI((u64)bp->t2_mapping + 16*1024 - 64);
-	REG_WR_DMAE(bp, SRC_REG_LASTFREE0 + func*4, wb_write, 2);
-
-	REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + func*4, 10);
+#ifdef BCM_CNIC
+	bnx2x_init_block(bp, SRCH_BLOCK, init_stage);
 #endif
 	bnx2x_init_block(bp, CDU_BLOCK, init_stage);
 	bnx2x_init_block(bp, CFC_BLOCK, init_stage);
@@ -6470,7 +6500,12 @@
 #define PXP_ONE_ILT(x)		(((x) << 10) | x)
 #define PXP_ILT_RANGE(f, l)	(((l) << 10) | f)
 
+#ifdef BCM_CNIC
+#define CNIC_ILT_LINES		127
+#define CNIC_CTX_PER_ILT	16
+#else
 #define CNIC_ILT_LINES		0
+#endif
 
 static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
 {
@@ -6509,6 +6544,46 @@
 		REG_WR(bp, PXP2_REG_PSWRQ_CDU0_L2P + func*4,
 		       PXP_ILT_RANGE(i, i + CNIC_ILT_LINES));
 
+#ifdef BCM_CNIC
+	i += 1 + CNIC_ILT_LINES;
+	bnx2x_ilt_wr(bp, i, bp->timers_mapping);
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, PXP2_REG_PSWRQ_TM0_L2P + func*4, PXP_ONE_ILT(i));
+	else {
+		REG_WR(bp, PXP2_REG_RQ_TM_FIRST_ILT, i);
+		REG_WR(bp, PXP2_REG_RQ_TM_LAST_ILT, i);
+	}
+
+	i++;
+	bnx2x_ilt_wr(bp, i, bp->qm_mapping);
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, PXP2_REG_PSWRQ_QM0_L2P + func*4, PXP_ONE_ILT(i));
+	else {
+		REG_WR(bp, PXP2_REG_RQ_QM_FIRST_ILT, i);
+		REG_WR(bp, PXP2_REG_RQ_QM_LAST_ILT, i);
+	}
+
+	i++;
+	bnx2x_ilt_wr(bp, i, bp->t1_mapping);
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
+	else {
+		REG_WR(bp, PXP2_REG_RQ_SRC_FIRST_ILT, i);
+		REG_WR(bp, PXP2_REG_RQ_SRC_LAST_ILT, i);
+	}
+
+	/* tell the searcher where the T2 table is */
+	REG_WR(bp, SRC_REG_COUNTFREE0 + port*4, 16*1024/64);
+
+	bnx2x_wb_wr(bp, SRC_REG_FIRSTFREE0 + port*16,
+		    U64_LO(bp->t2_mapping), U64_HI(bp->t2_mapping));
+
+	bnx2x_wb_wr(bp, SRC_REG_LASTFREE0 + port*16,
+		    U64_LO((u64)bp->t2_mapping + 16*1024 - 64),
+		    U64_HI((u64)bp->t2_mapping + 16*1024 - 64));
+
+	REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, 10);
+#endif
 
 	if (CHIP_IS_E1H(bp)) {
 		bnx2x_init_block(bp, MISC_BLOCK, FUNC0_STAGE + func);
@@ -6593,6 +6668,9 @@
 	bnx2x_zero_def_sb(bp);
 	for_each_queue(bp, i)
 		bnx2x_zero_sb(bp, BP_L_ID(bp) + i);
+#ifdef BCM_CNIC
+	bnx2x_zero_sb(bp, BP_L_ID(bp) + i);
+#endif
 
 init_hw_err:
 	bnx2x_gunzip_end(bp);
@@ -6632,7 +6710,7 @@
 			       sizeof(struct host_status_block));
 	}
 	/* Rx */
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 
 		/* fastpath rx rings: rx_buf rx_desc rx_comp */
 		BNX2X_FREE(bnx2x_fp(bp, i, rx_buf_ring));
@@ -6652,7 +6730,7 @@
 			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
 	}
 	/* Tx */
-	for_each_tx_queue(bp, i) {
+	for_each_queue(bp, i) {
 
 		/* fastpath tx rings: tx_buf tx_desc */
 		BNX2X_FREE(bnx2x_fp(bp, i, tx_buf_ring));
@@ -6668,11 +6746,13 @@
 	BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
 		       sizeof(struct bnx2x_slowpath));
 
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	BNX2X_PCI_FREE(bp->t1, bp->t1_mapping, 64*1024);
 	BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, 16*1024);
 	BNX2X_PCI_FREE(bp->timers, bp->timers_mapping, 8*1024);
 	BNX2X_PCI_FREE(bp->qm, bp->qm_mapping, 128*1024);
+	BNX2X_PCI_FREE(bp->cnic_sb, bp->cnic_sb_mapping,
+		       sizeof(struct host_status_block));
 #endif
 	BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
 
@@ -6712,7 +6792,7 @@
 				sizeof(struct host_status_block));
 	}
 	/* Rx */
-	for_each_rx_queue(bp, i) {
+	for_each_queue(bp, i) {
 
 		/* fastpath rx rings: rx_buf rx_desc rx_comp */
 		BNX2X_ALLOC(bnx2x_fp(bp, i, rx_buf_ring),
@@ -6734,7 +6814,7 @@
 				BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
 	}
 	/* Tx */
-	for_each_tx_queue(bp, i) {
+	for_each_queue(bp, i) {
 
 		/* fastpath tx rings: tx_buf tx_desc */
 		BNX2X_ALLOC(bnx2x_fp(bp, i, tx_buf_ring),
@@ -6751,32 +6831,26 @@
 	BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping,
 			sizeof(struct bnx2x_slowpath));
 
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	BNX2X_PCI_ALLOC(bp->t1, &bp->t1_mapping, 64*1024);
 
-	/* Initialize T1 */
-	for (i = 0; i < 64*1024; i += 64) {
-		*(u64 *)((char *)bp->t1 + i + 56) = 0x0UL;
-		*(u64 *)((char *)bp->t1 + i + 3) = 0x0UL;
-	}
-
 	/* allocate searcher T2 table
 	   we allocate 1/4 of alloc num for T2
 	  (which is not entered into the ILT) */
 	BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, 16*1024);
 
-	/* Initialize T2 */
+	/* Initialize T2 (for 1024 connections) */
 	for (i = 0; i < 16*1024; i += 64)
-		* (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
+		*(u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
 
-	/* now fixup the last line in the block to point to the next block */
-	*(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping;
-
-	/* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */
+	/* Timer block array (8*MAX_CONN) phys uncached for now 1024 conns */
 	BNX2X_PCI_ALLOC(bp->timers, &bp->timers_mapping, 8*1024);
 
 	/* QM queues (128*MAX_CONN) */
 	BNX2X_PCI_ALLOC(bp->qm, &bp->qm_mapping, 128*1024);
+
+	BNX2X_PCI_ALLOC(bp->cnic_sb, &bp->cnic_sb_mapping,
+			sizeof(struct host_status_block));
 #endif
 
 	/* Slow path ring */
@@ -6796,7 +6870,7 @@
 {
 	int i;
 
-	for_each_tx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		u16 bd_cons = fp->tx_bd_cons;
@@ -6814,7 +6888,7 @@
 {
 	int i, j;
 
-	for_each_rx_queue(bp, j) {
+	for_each_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		for (i = 0; i < NUM_RX_BD; i++) {
@@ -6852,6 +6926,9 @@
 	DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
 	   bp->msix_table[0].vector);
 
+#ifdef BCM_CNIC
+	offset++;
+#endif
 	for_each_queue(bp, i) {
 		DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq  "
 		   "state %x\n", i, bp->msix_table[i + offset].vector,
@@ -6885,6 +6962,12 @@
 	bp->msix_table[0].entry = igu_vec;
 	DP(NETIF_MSG_IFUP, "msix_table[0].entry = %d (slowpath)\n", igu_vec);
 
+#ifdef BCM_CNIC
+	igu_vec = BP_L_ID(bp) + offset;
+	bp->msix_table[1].entry = igu_vec;
+	DP(NETIF_MSG_IFUP, "msix_table[1].entry = %d (CNIC)\n", igu_vec);
+	offset++;
+#endif
 	for_each_queue(bp, i) {
 		igu_vec = BP_L_ID(bp) + offset + i;
 		bp->msix_table[i + offset].entry = igu_vec;
@@ -6915,14 +6998,13 @@
 		return -EBUSY;
 	}
 
+#ifdef BCM_CNIC
+	offset++;
+#endif
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
-
-		if (i < bp->num_rx_queues)
-			sprintf(fp->name, "%s-rx-%d", bp->dev->name, i);
-		else
-			sprintf(fp->name, "%s-tx-%d",
-				bp->dev->name, i - bp->num_rx_queues);
+		snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
+			 bp->dev->name, i);
 
 		rc = request_irq(bp->msix_table[i + offset].vector,
 				 bnx2x_msix_fp_int, 0, fp->name, fp);
@@ -6981,7 +7063,7 @@
 {
 	int i;
 
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		napi_enable(&bnx2x_fp(bp, i, napi));
 }
 
@@ -6989,7 +7071,7 @@
 {
 	int i;
 
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		napi_disable(&bnx2x_fp(bp, i, napi));
 }
 
@@ -7015,14 +7097,25 @@
 	bnx2x_int_disable_sync(bp, disable_hw);
 	bnx2x_napi_disable(bp);
 	netif_tx_disable(bp->dev);
-	bp->dev->trans_start = jiffies;	/* prevent tx timeout */
 }
 
 /*
  * Init service functions
  */
 
-static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
+/**
+ * Sets a MAC in a CAM for a few L2 Clients for E1 chip
+ *
+ * @param bp driver descriptor
+ * @param set set or clear an entry (1 or 0)
+ * @param mac pointer to a buffer containing a MAC
+ * @param cl_bit_vec bit vector of clients to register a MAC for
+ * @param cam_offset offset in a CAM to use
+ * @param with_bcast set broadcast MAC as well
+ */
+static void bnx2x_set_mac_addr_e1_gen(struct bnx2x *bp, int set, u8 *mac,
+				      u32 cl_bit_vec, u8 cam_offset,
+				      u8 with_bcast)
 {
 	struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
 	int port = BP_PORT(bp);
@@ -7031,25 +7124,25 @@
 	 * unicasts 0-31:port0 32-63:port1
 	 * multicast 64-127:port0 128-191:port1
 	 */
-	config->hdr.length = 2;
-	config->hdr.offset = port ? 32 : 0;
-	config->hdr.client_id = bp->fp->cl_id;
+	config->hdr.length = 1 + (with_bcast ? 1 : 0);
+	config->hdr.offset = cam_offset;
+	config->hdr.client_id = 0xff;
 	config->hdr.reserved1 = 0;
 
 	/* primary MAC */
 	config->config_table[0].cam_entry.msb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[0]);
+					swab16(*(u16 *)&mac[0]);
 	config->config_table[0].cam_entry.middle_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[2]);
+					swab16(*(u16 *)&mac[2]);
 	config->config_table[0].cam_entry.lsb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[4]);
+					swab16(*(u16 *)&mac[4]);
 	config->config_table[0].cam_entry.flags = cpu_to_le16(port);
 	if (set)
 		config->config_table[0].target_table_entry.flags = 0;
 	else
 		CAM_INVALIDATE(config->config_table[0]);
 	config->config_table[0].target_table_entry.clients_bit_vector =
-						cpu_to_le32(1 << BP_L_ID(bp));
+						cpu_to_le32(cl_bit_vec);
 	config->config_table[0].target_table_entry.vlan_id = 0;
 
 	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
@@ -7059,47 +7152,58 @@
 	   config->config_table[0].cam_entry.lsb_mac_addr);
 
 	/* broadcast */
-	config->config_table[1].cam_entry.msb_mac_addr = cpu_to_le16(0xffff);
-	config->config_table[1].cam_entry.middle_mac_addr = cpu_to_le16(0xffff);
-	config->config_table[1].cam_entry.lsb_mac_addr = cpu_to_le16(0xffff);
-	config->config_table[1].cam_entry.flags = cpu_to_le16(port);
-	if (set)
-		config->config_table[1].target_table_entry.flags =
-				TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
-	else
-		CAM_INVALIDATE(config->config_table[1]);
-	config->config_table[1].target_table_entry.clients_bit_vector =
-						cpu_to_le32(1 << BP_L_ID(bp));
-	config->config_table[1].target_table_entry.vlan_id = 0;
+	if (with_bcast) {
+		config->config_table[1].cam_entry.msb_mac_addr =
+			cpu_to_le16(0xffff);
+		config->config_table[1].cam_entry.middle_mac_addr =
+			cpu_to_le16(0xffff);
+		config->config_table[1].cam_entry.lsb_mac_addr =
+			cpu_to_le16(0xffff);
+		config->config_table[1].cam_entry.flags = cpu_to_le16(port);
+		if (set)
+			config->config_table[1].target_table_entry.flags =
+					TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
+		else
+			CAM_INVALIDATE(config->config_table[1]);
+		config->config_table[1].target_table_entry.clients_bit_vector =
+							cpu_to_le32(cl_bit_vec);
+		config->config_table[1].target_table_entry.vlan_id = 0;
+	}
 
 	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 		      U64_HI(bnx2x_sp_mapping(bp, mac_config)),
 		      U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 }
 
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set)
+/**
+ * Sets a MAC in a CAM for a few L2 Clients for E1H chip
+ *
+ * @param bp driver descriptor
+ * @param set set or clear an entry (1 or 0)
+ * @param mac pointer to a buffer containing a MAC
+ * @param cl_bit_vec bit vector of clients to register a MAC for
+ * @param cam_offset offset in a CAM to use
+ */
+static void bnx2x_set_mac_addr_e1h_gen(struct bnx2x *bp, int set, u8 *mac,
+				       u32 cl_bit_vec, u8 cam_offset)
 {
 	struct mac_configuration_cmd_e1h *config =
 		(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
 
-	/* CAM allocation for E1H
-	 * unicasts: by func number
-	 * multicast: 20+FUNC*20, 20 each
-	 */
 	config->hdr.length = 1;
-	config->hdr.offset = BP_FUNC(bp);
-	config->hdr.client_id = bp->fp->cl_id;
+	config->hdr.offset = cam_offset;
+	config->hdr.client_id = 0xff;
 	config->hdr.reserved1 = 0;
 
 	/* primary MAC */
 	config->config_table[0].msb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[0]);
+					swab16(*(u16 *)&mac[0]);
 	config->config_table[0].middle_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[2]);
+					swab16(*(u16 *)&mac[2]);
 	config->config_table[0].lsb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[4]);
+					swab16(*(u16 *)&mac[4]);
 	config->config_table[0].clients_bit_vector =
-					cpu_to_le32(1 << BP_L_ID(bp));
+					cpu_to_le32(cl_bit_vec);
 	config->config_table[0].vlan_id = 0;
 	config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
 	if (set)
@@ -7108,11 +7212,11 @@
 		config->config_table[0].flags =
 				MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
 
-	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID mask %d\n",
 	   (set ? "setting" : "clearing"),
 	   config->config_table[0].msb_mac_addr,
 	   config->config_table[0].middle_mac_addr,
-	   config->config_table[0].lsb_mac_addr, bp->e1hov, BP_L_ID(bp));
+	   config->config_table[0].lsb_mac_addr, bp->e1hov, cl_bit_vec);
 
 	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 		      U64_HI(bnx2x_sp_mapping(bp, mac_config)),
@@ -7164,6 +7268,69 @@
 	return -EBUSY;
 }
 
+static void bnx2x_set_eth_mac_addr_e1h(struct bnx2x *bp, int set)
+{
+	bp->set_mac_pending++;
+	smp_wmb();
+
+	bnx2x_set_mac_addr_e1h_gen(bp, set, bp->dev->dev_addr,
+				   (1 << bp->fp->cl_id), BP_FUNC(bp));
+
+	/* Wait for a completion */
+	bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
+}
+
+static void bnx2x_set_eth_mac_addr_e1(struct bnx2x *bp, int set)
+{
+	bp->set_mac_pending++;
+	smp_wmb();
+
+	bnx2x_set_mac_addr_e1_gen(bp, set, bp->dev->dev_addr,
+				  (1 << bp->fp->cl_id), (BP_PORT(bp) ? 32 : 0),
+				  1);
+
+	/* Wait for a completion */
+	bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
+}
+
+#ifdef BCM_CNIC
+/**
+ * Set iSCSI MAC(s) at the next enties in the CAM after the ETH
+ * MAC(s). This function will wait until the ramdord completion
+ * returns.
+ *
+ * @param bp driver handle
+ * @param set set or clear the CAM entry
+ *
+ * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ */
+static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
+{
+	u32 cl_bit_vec = (1 << BCM_ISCSI_ETH_CL_ID);
+
+	bp->set_mac_pending++;
+	smp_wmb();
+
+	/* Send a SET_MAC ramrod */
+	if (CHIP_IS_E1(bp))
+		bnx2x_set_mac_addr_e1_gen(bp, set, bp->iscsi_mac,
+				  cl_bit_vec, (BP_PORT(bp) ? 32 : 0) + 2,
+				  1);
+	else
+		/* CAM allocation for E1H
+		* unicasts: by func number
+		* multicast: 20+FUNC*20, 20 each
+		*/
+		bnx2x_set_mac_addr_e1h_gen(bp, set, bp->iscsi_mac,
+				   cl_bit_vec, E1H_FUNC_MAX + BP_FUNC(bp));
+
+	/* Wait for a completion when setting */
+	bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
+
+	return 0;
+}
+#endif
+
 static int bnx2x_setup_leading(struct bnx2x *bp)
 {
 	int rc;
@@ -7199,96 +7366,67 @@
 
 static int bnx2x_poll(struct napi_struct *napi, int budget);
 
-static void bnx2x_set_int_mode_msix(struct bnx2x *bp, int *num_rx_queues_out,
-				    int *num_tx_queues_out)
+static void bnx2x_set_num_queues_msix(struct bnx2x *bp)
 {
-	int _num_rx_queues = 0, _num_tx_queues = 0;
 
 	switch (bp->multi_mode) {
 	case ETH_RSS_MODE_DISABLED:
-		_num_rx_queues = 1;
-		_num_tx_queues = 1;
+		bp->num_queues = 1;
 		break;
 
 	case ETH_RSS_MODE_REGULAR:
-		if (num_rx_queues)
-			_num_rx_queues = min_t(u32, num_rx_queues,
-					       BNX2X_MAX_QUEUES(bp));
+		if (num_queues)
+			bp->num_queues = min_t(u32, num_queues,
+						  BNX2X_MAX_QUEUES(bp));
 		else
-			_num_rx_queues = min_t(u32, num_online_cpus(),
-					       BNX2X_MAX_QUEUES(bp));
-
-		if (num_tx_queues)
-			_num_tx_queues = min_t(u32, num_tx_queues,
-					       BNX2X_MAX_QUEUES(bp));
-		else
-			_num_tx_queues = min_t(u32, num_online_cpus(),
-					       BNX2X_MAX_QUEUES(bp));
-
-		/* There must be not more Tx queues than Rx queues */
-		if (_num_tx_queues > _num_rx_queues) {
-			BNX2X_ERR("number of tx queues (%d) > "
-				  "number of rx queues (%d)"
-				  "  defaulting to %d\n",
-				  _num_tx_queues, _num_rx_queues,
-				  _num_rx_queues);
-			_num_tx_queues = _num_rx_queues;
-		}
+			bp->num_queues = min_t(u32, num_online_cpus(),
+						  BNX2X_MAX_QUEUES(bp));
 		break;
 
 
 	default:
-		_num_rx_queues = 1;
-		_num_tx_queues = 1;
+		bp->num_queues = 1;
 		break;
 	}
-
-	*num_rx_queues_out = _num_rx_queues;
-	*num_tx_queues_out = _num_tx_queues;
 }
 
-static int bnx2x_set_int_mode(struct bnx2x *bp)
+static int bnx2x_set_num_queues(struct bnx2x *bp)
 {
 	int rc = 0;
 
 	switch (int_mode) {
 	case INT_MODE_INTx:
 	case INT_MODE_MSI:
-		bp->num_rx_queues = 1;
-		bp->num_tx_queues = 1;
+		bp->num_queues = 1;
 		DP(NETIF_MSG_IFUP, "set number of queues to 1\n");
 		break;
 
 	case INT_MODE_MSIX:
 	default:
-		/* Set interrupt mode according to bp->multi_mode value */
-		bnx2x_set_int_mode_msix(bp, &bp->num_rx_queues,
-					&bp->num_tx_queues);
+		/* Set number of queues according to bp->multi_mode value */
+		bnx2x_set_num_queues_msix(bp);
 
-		DP(NETIF_MSG_IFUP, "set number of queues to: rx %d tx %d\n",
-		   bp->num_rx_queues, bp->num_tx_queues);
+		DP(NETIF_MSG_IFUP, "set number of queues to %d\n",
+		   bp->num_queues);
 
 		/* if we can't use MSI-X we only need one fp,
 		 * so try to enable MSI-X with the requested number of fp's
 		 * and fallback to MSI or legacy INTx with one fp
 		 */
 		rc = bnx2x_enable_msix(bp);
-		if (rc) {
+		if (rc)
 			/* failed to enable MSI-X */
-			if (bp->multi_mode)
-				BNX2X_ERR("Multi requested but failed to "
-					  "enable MSI-X (rx %d tx %d), "
-					  "set number of queues to 1\n",
-					  bp->num_rx_queues, bp->num_tx_queues);
-			bp->num_rx_queues = 1;
-			bp->num_tx_queues = 1;
-		}
+			bp->num_queues = 1;
 		break;
 	}
-	bp->dev->real_num_tx_queues = bp->num_tx_queues;
+	bp->dev->real_num_tx_queues = bp->num_queues;
 	return rc;
 }
 
+#ifdef BCM_CNIC
+static int bnx2x_cnic_notify(struct bnx2x *bp, int cmd);
+static void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
+#endif
 
 /* must be called with rtnl_lock */
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
@@ -7303,16 +7441,16 @@
 
 	bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
 
-	rc = bnx2x_set_int_mode(bp);
+	rc = bnx2x_set_num_queues(bp);
 
 	if (bnx2x_alloc_mem(bp))
 		return -ENOMEM;
 
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		bnx2x_fp(bp, i, disable_tpa) =
 					((bp->flags & TPA_ENABLE_FLAG) == 0);
 
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
 			       bnx2x_poll, 128);
 
@@ -7326,7 +7464,7 @@
 		}
 	} else {
 		/* Fall to INTx if failed to enable MSI-X due to lack of
-		   memory (in bnx2x_set_int_mode()) */
+		   memory (in bnx2x_set_num_queues()) */
 		if ((rc != -ENOMEM) && (int_mode != INT_MODE_INTx))
 			bnx2x_enable_msi(bp);
 		bnx2x_ack_int(bp);
@@ -7427,20 +7565,37 @@
 	if (CHIP_IS_E1H(bp))
 		if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
 			DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n");
-			bp->state = BNX2X_STATE_DISABLED;
+			bp->flags |= MF_FUNC_DIS;
 		}
 
 	if (bp->state == BNX2X_STATE_OPEN) {
+#ifdef BCM_CNIC
+		/* Enable Timer scan */
+		REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + BP_PORT(bp)*4, 1);
+#endif
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
+#ifdef BCM_CNIC
+				goto load_error4;
+#else
 				goto load_error3;
+#endif
 		}
 
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp, 1);
+			bnx2x_set_eth_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp, 1);
+			bnx2x_set_eth_mac_addr_e1h(bp, 1);
+#ifdef BCM_CNIC
+		/* Set iSCSI L2 MAC */
+		mutex_lock(&bp->cnic_mutex);
+		if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD) {
+			bnx2x_set_iscsi_eth_mac_addr(bp, 1);
+			bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET;
+		}
+		mutex_unlock(&bp->cnic_mutex);
+#endif
 	}
 
 	if (bp->port.pmf)
@@ -7481,9 +7636,19 @@
 	/* start the timer */
 	mod_timer(&bp->timer, jiffies + bp->current_interval);
 
+#ifdef BCM_CNIC
+	bnx2x_setup_cnic_irq_info(bp);
+	if (bp->state == BNX2X_STATE_OPEN)
+		bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
+#endif
 
 	return 0;
 
+#ifdef BCM_CNIC
+load_error4:
+	/* Disable Timer scan */
+	REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + BP_PORT(bp)*4, 0);
+#endif
 load_error3:
 	bnx2x_int_disable_sync(bp, 1);
 	if (!BP_NOMCP(bp)) {
@@ -7493,14 +7658,14 @@
 	bp->port.pmf = 0;
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 load_error2:
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
 load_error1:
 	bnx2x_napi_disable(bp);
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
@@ -7591,6 +7756,19 @@
 	REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 	REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 
+#ifdef BCM_CNIC
+	/* Disable Timer scan */
+	REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
+	/*
+	 * Wait for at least 10ms and up to 2 second for the timers scan to
+	 * complete
+	 */
+	for (i = 0; i < 200; i++) {
+		msleep(10);
+		if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
+			break;
+	}
+#endif
 	/* Clear ILT */
 	base = FUNC_ILT_BASE(func);
 	for (i = base; i < base + ILT_PER_FUNC; i++)
@@ -7657,6 +7835,9 @@
 	u32 reset_code = 0;
 	int i, cnt, rc;
 
+#ifdef BCM_CNIC
+	bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
+#endif
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
 	/* Set "drop all" */
@@ -7675,7 +7856,7 @@
 	bnx2x_free_irq(bp);
 
 	/* Wait until tx fastpath tasks complete */
-	for_each_tx_queue(bp, i) {
+	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		cnt = 1000;
@@ -7703,7 +7884,7 @@
 		struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
 
-		bnx2x_set_mac_addr_e1(bp, 0);
+		bnx2x_set_eth_mac_addr_e1(bp, 0);
 
 		for (i = 0; i < config->hdr.length; i++)
 			CAM_INVALIDATE(config->config_table[i]);
@@ -7716,6 +7897,9 @@
 		config->hdr.client_id = bp->fp->cl_id;
 		config->hdr.reserved1 = 0;
 
+		bp->set_mac_pending++;
+		smp_wmb();
+
 		bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 			      U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
 			      U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
@@ -7723,13 +7907,22 @@
 	} else { /* E1H */
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
 
-		bnx2x_set_mac_addr_e1h(bp, 0);
+		bnx2x_set_eth_mac_addr_e1h(bp, 0);
 
 		for (i = 0; i < MC_HASH_SIZE; i++)
 			REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
 
 		REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
 	}
+#ifdef BCM_CNIC
+	/* Clear iSCSI L2 MAC */
+	mutex_lock(&bp->cnic_mutex);
+	if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
+		bnx2x_set_iscsi_eth_mac_addr(bp, 0);
+		bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
+	}
+	mutex_unlock(&bp->cnic_mutex);
+#endif
 
 	if (unload_mode == UNLOAD_NORMAL)
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
@@ -7806,9 +7999,9 @@
 
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
@@ -8506,6 +8699,14 @@
 		       bp->link_params.req_flow_ctrl, bp->port.advertising);
 }
 
+static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
+{
+	mac_hi = cpu_to_be16(mac_hi);
+	mac_lo = cpu_to_be32(mac_lo);
+	memcpy(mac_buf, &mac_hi, sizeof(mac_hi));
+	memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo));
+}
+
 static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
@@ -8587,14 +8788,15 @@
 
 	val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
 	val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
-	bp->dev->dev_addr[0] = (u8)(val2 >> 8 & 0xff);
-	bp->dev->dev_addr[1] = (u8)(val2 & 0xff);
-	bp->dev->dev_addr[2] = (u8)(val >> 24 & 0xff);
-	bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff);
-	bp->dev->dev_addr[4] = (u8)(val >> 8  & 0xff);
-	bp->dev->dev_addr[5] = (u8)(val & 0xff);
+	bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
 	memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
 	memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
+
+#ifdef BCM_CNIC
+	val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_upper);
+	val = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_lower);
+	bnx2x_set_mac_buf(bp->iscsi_mac, val, val2);
+#endif
 }
 
 static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -8690,6 +8892,10 @@
 	smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
 
 	mutex_init(&bp->port.phy_mutex);
+	mutex_init(&bp->fw_mb_mutex);
+#ifdef BCM_CNIC
+	mutex_init(&bp->cnic_mutex);
+#endif
 
 	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
 	INIT_WORK(&bp->reset_task, bnx2x_reset_task);
@@ -8738,8 +8944,9 @@
 
 	bp->rx_csum = 1;
 
-	bp->tx_ticks = 50;
-	bp->rx_ticks = 25;
+	/* make sure that the numbers are in the right granularity */
+	bp->tx_ticks = (50 / (4 * BNX2X_BTR)) * (4 * BNX2X_BTR);
+	bp->rx_ticks = (25 / (4 * BNX2X_BTR)) * (4 * BNX2X_BTR);
 
 	timer_interval = (CHIP_REV_IS_SLOW(bp) ? 5*HZ : HZ);
 	bp->current_interval = (poll ? poll : timer_interval);
@@ -8765,20 +8972,23 @@
 	cmd->supported = bp->port.supported;
 	cmd->advertising = bp->port.advertising;
 
-	if (netif_carrier_ok(dev)) {
+	if ((bp->state == BNX2X_STATE_OPEN) &&
+	    !(bp->flags & MF_FUNC_DIS) &&
+	    (bp->link_vars.link_up)) {
 		cmd->speed = bp->link_vars.line_speed;
 		cmd->duplex = bp->link_vars.duplex;
-	} else {
-		cmd->speed = bp->link_params.req_line_speed;
-		cmd->duplex = bp->link_params.req_duplex;
-	}
-	if (IS_E1HMF(bp)) {
-		u16 vn_max_rate;
+		if (IS_E1HMF(bp)) {
+			u16 vn_max_rate;
 
-		vn_max_rate = ((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
+			vn_max_rate =
+				((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
 				FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
-		if (vn_max_rate < cmd->speed)
-			cmd->speed = vn_max_rate;
+			if (vn_max_rate < cmd->speed)
+				cmd->speed = vn_max_rate;
+		}
+	} else {
+		cmd->speed = -1;
+		cmd->duplex = -1;
 	}
 
 	if (bp->link_params.switch_cfg == SWITCH_CFG_10G) {
@@ -9163,6 +9373,9 @@
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
+	if (bp->flags & MF_FUNC_DIS)
+		return 0;
+
 	return bp->link_vars.link_up;
 }
 
@@ -9567,8 +9780,7 @@
 
 	} else if (eeprom->magic == 0x50485952) {
 		/* 'PHYR' (0x50485952): re-init link after FW upgrade */
-		if ((bp->state == BNX2X_STATE_OPEN) ||
-		    (bp->state == BNX2X_STATE_DISABLED)) {
+		if (bp->state == BNX2X_STATE_OPEN) {
 			bnx2x_acquire_phy_lock(bp);
 			rc |= bnx2x_link_reset(&bp->link_params,
 					       &bp->link_vars, 1);
@@ -9818,11 +10030,6 @@
 	{ "idle check (online)" }
 };
 
-static int bnx2x_self_test_count(struct net_device *dev)
-{
-	return BNX2X_NUM_TESTS;
-}
-
 static int bnx2x_test_registers(struct bnx2x *bp)
 {
 	int idx, i, rc = -ENODEV;
@@ -9990,7 +10197,7 @@
 	struct sk_buff *skb;
 	unsigned char *packet;
 	struct bnx2x_fastpath *fp_rx = &bp->fp[0];
-	struct bnx2x_fastpath *fp_tx = &bp->fp[bp->num_rx_queues];
+	struct bnx2x_fastpath *fp_tx = &bp->fp[0];
 	u16 tx_start_idx, tx_idx;
 	u16 rx_start_idx, rx_idx;
 	u16 pkt_prod, bd_prod;
@@ -10067,13 +10274,12 @@
 
 	fp_tx->tx_db.data.prod += 2;
 	barrier();
-	DOORBELL(bp, fp_tx->index - bp->num_rx_queues, fp_tx->tx_db.raw);
+	DOORBELL(bp, fp_tx->index, fp_tx->tx_db.raw);
 
 	mmiowb();
 
 	num_pkts++;
 	fp_tx->tx_bd_prod += 2; /* start + pbd */
-	bp->dev->trans_start = jiffies;
 
 	udelay(100);
 
@@ -10223,14 +10429,16 @@
 	config->hdr.client_id = bp->fp->cl_id;
 	config->hdr.reserved1 = 0;
 
+	bp->set_mac_pending++;
+	smp_wmb();
 	rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 			   U64_HI(bnx2x_sp_mapping(bp, mac_config)),
 			   U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 	if (rc == 0) {
-		bp->set_mac_pending++;
 		for (i = 0; i < 10; i++) {
 			if (!bp->set_mac_pending)
 				break;
+			smp_rmb();
 			msleep_interruptible(10);
 		}
 		if (i == 10)
@@ -10264,7 +10472,7 @@
 		/* disable input for TX port IF */
 		REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
 
-		link_up = bp->link_vars.link_up;
+		link_up = (bnx2x_link_test(bp) == 0);
 		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
 		bnx2x_nic_load(bp, LOAD_DIAG);
 		/* wait until link state is restored */
@@ -10436,6 +10644,36 @@
 #define IS_E1HMF_MODE_STAT(bp) \
 			(IS_E1HMF(bp) && !(bp->msglevel & BNX2X_MSG_STATS))
 
+static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int i, num_stats;
+
+	switch(stringset) {
+	case ETH_SS_STATS:
+		if (is_multi(bp)) {
+			num_stats = BNX2X_NUM_Q_STATS * bp->num_queues;
+			if (!IS_E1HMF_MODE_STAT(bp))
+				num_stats += BNX2X_NUM_STATS;
+		} else {
+			if (IS_E1HMF_MODE_STAT(bp)) {
+				num_stats = 0;
+				for (i = 0; i < BNX2X_NUM_STATS; i++)
+					if (IS_FUNC_STAT(i))
+						num_stats++;
+			} else
+				num_stats = BNX2X_NUM_STATS;
+		}
+		return num_stats;
+
+	case ETH_SS_TEST:
+		return BNX2X_NUM_TESTS;
+
+	default:
+		return -EINVAL;
+	}
+}
+
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -10445,7 +10683,7 @@
 	case ETH_SS_STATS:
 		if (is_multi(bp)) {
 			k = 0;
-			for_each_rx_queue(bp, i) {
+			for_each_queue(bp, i) {
 				for (j = 0; j < BNX2X_NUM_Q_STATS; j++)
 					sprintf(buf + (k + j)*ETH_GSTRING_LEN,
 						bnx2x_q_stats_arr[j].string, i);
@@ -10473,28 +10711,6 @@
 	}
 }
 
-static int bnx2x_get_stats_count(struct net_device *dev)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int i, num_stats;
-
-	if (is_multi(bp)) {
-		num_stats = BNX2X_NUM_Q_STATS * bp->num_rx_queues;
-		if (!IS_E1HMF_MODE_STAT(bp))
-			num_stats += BNX2X_NUM_STATS;
-	} else {
-		if (IS_E1HMF_MODE_STAT(bp)) {
-			num_stats = 0;
-			for (i = 0; i < BNX2X_NUM_STATS; i++)
-				if (IS_FUNC_STAT(i))
-					num_stats++;
-		} else
-			num_stats = BNX2X_NUM_STATS;
-	}
-
-	return num_stats;
-}
-
 static void bnx2x_get_ethtool_stats(struct net_device *dev,
 				    struct ethtool_stats *stats, u64 *buf)
 {
@@ -10504,7 +10720,7 @@
 
 	if (is_multi(bp)) {
 		k = 0;
-		for_each_rx_queue(bp, i) {
+		for_each_queue(bp, i) {
 			hw_stats = (u32 *)&bp->fp[i].eth_q_stats;
 			for (j = 0; j < BNX2X_NUM_Q_STATS; j++) {
 				if (bnx2x_q_stats_arr[j].size == 0) {
@@ -10570,7 +10786,6 @@
 static int bnx2x_phys_id(struct net_device *dev, u32 data)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	int port = BP_PORT(bp);
 	int i;
 
 	if (!netif_running(dev))
@@ -10584,13 +10799,10 @@
 
 	for (i = 0; i < (data * 2); i++) {
 		if ((i % 2) == 0)
-			bnx2x_set_led(bp, port, LED_MODE_OPER, SPEED_1000,
-				      bp->link_params.hw_led_mode,
-				      bp->link_params.chip_id);
+			bnx2x_set_led(&bp->link_params, LED_MODE_OPER,
+				      SPEED_1000);
 		else
-			bnx2x_set_led(bp, port, LED_MODE_OFF, 0,
-				      bp->link_params.hw_led_mode,
-				      bp->link_params.chip_id);
+			bnx2x_set_led(&bp->link_params, LED_MODE_OFF, 0);
 
 		msleep_interruptible(500);
 		if (signal_pending(current))
@@ -10598,10 +10810,8 @@
 	}
 
 	if (bp->link_vars.link_up)
-		bnx2x_set_led(bp, port, LED_MODE_OPER,
-			      bp->link_vars.line_speed,
-			      bp->link_params.hw_led_mode,
-			      bp->link_params.chip_id);
+		bnx2x_set_led(&bp->link_params, LED_MODE_OPER,
+			      bp->link_vars.line_speed);
 
 	return 0;
 }
@@ -10637,11 +10847,10 @@
 	.set_sg			= ethtool_op_set_sg,
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= bnx2x_set_tso,
-	.self_test_count	= bnx2x_self_test_count,
 	.self_test		= bnx2x_self_test,
+	.get_sset_count		= bnx2x_get_sset_count,
 	.get_strings		= bnx2x_get_strings,
 	.phys_id		= bnx2x_phys_id,
-	.get_stats_count	= bnx2x_get_stats_count,
 	.get_ethtool_stats	= bnx2x_get_ethtool_stats,
 };
 
@@ -10707,54 +10916,60 @@
 
 static int bnx2x_poll(struct napi_struct *napi, int budget)
 {
+	int work_done = 0;
 	struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath,
 						 napi);
 	struct bnx2x *bp = fp->bp;
-	int work_done = 0;
 
+	while (1) {
 #ifdef BNX2X_STOP_ON_ERROR
-	if (unlikely(bp->panic))
-		goto poll_panic;
+		if (unlikely(bp->panic)) {
+			napi_complete(napi);
+			return 0;
+		}
 #endif
 
-	prefetch(fp->rx_buf_ring[RX_BD(fp->rx_bd_cons)].skb);
-	prefetch((char *)(fp->rx_buf_ring[RX_BD(fp->rx_bd_cons)].skb) + 256);
+		if (bnx2x_has_tx_work(fp))
+			bnx2x_tx_int(fp);
 
-	bnx2x_update_fpsb_idx(fp);
+		if (bnx2x_has_rx_work(fp)) {
+			work_done += bnx2x_rx_int(fp, budget - work_done);
 
-	if (bnx2x_has_rx_work(fp)) {
-		work_done = bnx2x_rx_int(fp, budget);
+			/* must not complete if we consumed full budget */
+			if (work_done >= budget)
+				break;
+		}
 
-		/* must not complete if we consumed full budget */
-		if (work_done >= budget)
-			goto poll_again;
+		/* Fall out from the NAPI loop if needed */
+		if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
+			bnx2x_update_fpsb_idx(fp);
+		/* bnx2x_has_rx_work() reads the status block, thus we need
+		 * to ensure that status block indices have been actually read
+		 * (bnx2x_update_fpsb_idx) prior to this check
+		 * (bnx2x_has_rx_work) so that we won't write the "newer"
+		 * value of the status block to IGU (if there was a DMA right
+		 * after bnx2x_has_rx_work and if there is no rmb, the memory
+		 * reading (bnx2x_update_fpsb_idx) may be postponed to right
+		 * before bnx2x_ack_sb). In this case there will never be
+		 * another interrupt until there is another update of the
+		 * status block, while there is still unhandled work.
+		 */
+			rmb();
+
+			if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
+				napi_complete(napi);
+				/* Re-enable interrupts */
+				bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
+					     le16_to_cpu(fp->fp_c_idx),
+					     IGU_INT_NOP, 1);
+				bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
+					     le16_to_cpu(fp->fp_u_idx),
+					     IGU_INT_ENABLE, 1);
+				break;
+			}
+		}
 	}
 
-	/* bnx2x_has_rx_work() reads the status block, thus we need to
-	 * ensure that status block indices have been actually read
-	 * (bnx2x_update_fpsb_idx) prior to this check (bnx2x_has_rx_work)
-	 * so that we won't write the "newer" value of the status block to IGU
-	 * (if there was a DMA right after bnx2x_has_rx_work and
-	 * if there is no rmb, the memory reading (bnx2x_update_fpsb_idx)
-	 * may be postponed to right before bnx2x_ack_sb). In this case
-	 * there will never be another interrupt until there is another update
-	 * of the status block, while there is still unhandled work.
-	 */
-	rmb();
-
-	if (!bnx2x_has_rx_work(fp)) {
-#ifdef BNX2X_STOP_ON_ERROR
-poll_panic:
-#endif
-		napi_complete(napi);
-
-		bnx2x_ack_sb(bp, fp->sb_id, USTORM_ID,
-			     le16_to_cpu(fp->fp_u_idx), IGU_INT_NOP, 1);
-		bnx2x_ack_sb(bp, fp->sb_id, CSTORM_ID,
-			     le16_to_cpu(fp->fp_c_idx), IGU_INT_ENABLE, 1);
-	}
-
-poll_again:
 	return work_done;
 }
 
@@ -10843,10 +11058,10 @@
 	}
 
 	if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
-		rc |= XMIT_GSO_V4;
+		rc |= (XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP);
 
 	else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
-		rc |= XMIT_GSO_V6;
+		rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6);
 
 	return rc;
 }
@@ -10939,7 +11154,7 @@
 static netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	struct bnx2x_fastpath *fp, *fp_stat;
+	struct bnx2x_fastpath *fp;
 	struct netdev_queue *txq;
 	struct sw_tx_bd *tx_buf;
 	struct eth_tx_start_bd *tx_start_bd;
@@ -10961,11 +11176,10 @@
 	fp_index = skb_get_queue_mapping(skb);
 	txq = netdev_get_tx_queue(dev, fp_index);
 
-	fp = &bp->fp[fp_index + bp->num_rx_queues];
-	fp_stat = &bp->fp[fp_index];
+	fp = &bp->fp[fp_index];
 
 	if (unlikely(bnx2x_tx_avail(fp) < (skb_shinfo(skb)->nr_frags + 3))) {
-		fp_stat->eth_q_stats.driver_xoff++;
+		fp->eth_q_stats.driver_xoff++;
 		netif_tx_stop_queue(txq);
 		BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
 		return NETDEV_TX_BUSY;
@@ -11191,7 +11405,7 @@
 
 	fp->tx_db.data.prod += nbd;
 	barrier();
-	DOORBELL(bp, fp->index - bp->num_rx_queues, fp->tx_db.raw);
+	DOORBELL(bp, fp->index, fp->tx_db.raw);
 
 	mmiowb();
 
@@ -11202,11 +11416,11 @@
 		/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
 		   if we put Tx into XOFF state. */
 		smp_mb();
-		fp_stat->eth_q_stats.driver_xoff++;
+		fp->eth_q_stats.driver_xoff++;
 		if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
 			netif_tx_wake_queue(txq);
 	}
-	fp_stat->tx_pkt++;
+	fp->tx_pkt++;
 
 	return NETDEV_TX_OK;
 }
@@ -11321,6 +11535,9 @@
 			config->hdr.client_id = bp->fp->cl_id;
 			config->hdr.reserved1 = 0;
 
+			bp->set_mac_pending++;
+			smp_wmb();
+
 			bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 				   U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
 				   U64_LO(bnx2x_sp_mapping(bp, mcast_config)),
@@ -11370,9 +11587,9 @@
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev)) {
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp, 1);
+			bnx2x_set_eth_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp, 1);
+			bnx2x_set_eth_mac_addr_e1h(bp, 1);
 	}
 
 	return 0;
@@ -11830,21 +12047,14 @@
 
 static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
 {
-	char fw_file_name[40] = {0};
+	const char *fw_file_name;
 	struct bnx2x_fw_file_hdr *fw_hdr;
-	int rc, offset;
+	int rc;
 
-	/* Create a FW file name */
 	if (CHIP_IS_E1(bp))
-		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+		fw_file_name = FW_FILE_NAME_E1;
 	else
-		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
-
-	sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
-		BCM_5710_FW_MAJOR_VERSION,
-		BCM_5710_FW_MINOR_VERSION,
-		BCM_5710_FW_REVISION_VERSION,
-		BCM_5710_FW_ENGINEERING_VERSION);
+		fw_file_name = FW_FILE_NAME_E1H;
 
 	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
 
@@ -12098,9 +12308,9 @@
 
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
-	for_each_rx_queue(bp, i)
+	for_each_queue(bp, i)
 		netif_napi_del(&bnx2x_fp(bp, i, napi));
 	bnx2x_free_mem(bp);
 
@@ -12276,4 +12486,287 @@
 module_init(bnx2x_init);
 module_exit(bnx2x_cleanup);
 
+#ifdef BCM_CNIC
+
+/* count denotes the number of new completions we have seen */
+static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
+{
+	struct eth_spe *spe;
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+	bp->cnic_spq_pending -= count;
+
+	for (; bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending;
+	     bp->cnic_spq_pending++) {
+
+		if (!bp->cnic_kwq_pending)
+			break;
+
+		spe = bnx2x_sp_get_next(bp);
+		*spe = *bp->cnic_kwq_cons;
+
+		bp->cnic_kwq_pending--;
+
+		DP(NETIF_MSG_TIMER, "pending on SPQ %d, on KWQ %d count %d\n",
+		   bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
+
+		if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
+			bp->cnic_kwq_cons = bp->cnic_kwq;
+		else
+			bp->cnic_kwq_cons++;
+	}
+	bnx2x_sp_prod_update(bp);
+	spin_unlock_bh(&bp->spq_lock);
+}
+
+static int bnx2x_cnic_sp_queue(struct net_device *dev,
+			       struct kwqe_16 *kwqes[], u32 count)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int i;
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return -EIO;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+
+	for (i = 0; i < count; i++) {
+		struct eth_spe *spe = (struct eth_spe *)kwqes[i];
+
+		if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
+			break;
+
+		*bp->cnic_kwq_prod = *spe;
+
+		bp->cnic_kwq_pending++;
+
+		DP(NETIF_MSG_TIMER, "L5 SPQE %x %x %x:%x pos %d\n",
+		   spe->hdr.conn_and_cmd_data, spe->hdr.type,
+		   spe->data.mac_config_addr.hi,
+		   spe->data.mac_config_addr.lo,
+		   bp->cnic_kwq_pending);
+
+		if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
+			bp->cnic_kwq_prod = bp->cnic_kwq;
+		else
+			bp->cnic_kwq_prod++;
+	}
+
+	spin_unlock_bh(&bp->spq_lock);
+
+	if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
+		bnx2x_cnic_sp_post(bp, 0);
+
+	return i;
+}
+
+static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
+{
+	struct cnic_ops *c_ops;
+	int rc = 0;
+
+	mutex_lock(&bp->cnic_mutex);
+	c_ops = bp->cnic_ops;
+	if (c_ops)
+		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
+	mutex_unlock(&bp->cnic_mutex);
+
+	return rc;
+}
+
+static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
+{
+	struct cnic_ops *c_ops;
+	int rc = 0;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops)
+		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
+	rcu_read_unlock();
+
+	return rc;
+}
+
+/*
+ * for commands that have no data
+ */
+static int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
+{
+	struct cnic_ctl_info ctl = {0};
+
+	ctl.cmd = cmd;
+
+	return bnx2x_cnic_ctl_send(bp, &ctl);
+}
+
+static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid)
+{
+	struct cnic_ctl_info ctl;
+
+	/* first we tell CNIC and only then we count this as a completion */
+	ctl.cmd = CNIC_CTL_COMPLETION_CMD;
+	ctl.data.comp.cid = cid;
+
+	bnx2x_cnic_ctl_send_bh(bp, &ctl);
+	bnx2x_cnic_sp_post(bp, 1);
+}
+
+static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int rc = 0;
+
+	switch (ctl->cmd) {
+	case DRV_CTL_CTXTBL_WR_CMD: {
+		u32 index = ctl->data.io.offset;
+		dma_addr_t addr = ctl->data.io.dma_addr;
+
+		bnx2x_ilt_wr(bp, index, addr);
+		break;
+	}
+
+	case DRV_CTL_COMPLETION_CMD: {
+		int count = ctl->data.comp.comp_count;
+
+		bnx2x_cnic_sp_post(bp, count);
+		break;
+	}
+
+	/* rtnl_lock is held.  */
+	case DRV_CTL_START_L2_CMD: {
+		u32 cli = ctl->data.ring.client_id;
+
+		bp->rx_mode_cl_mask |= (1 << cli);
+		bnx2x_set_storm_rx_mode(bp);
+		break;
+	}
+
+	/* rtnl_lock is held.  */
+	case DRV_CTL_STOP_L2_CMD: {
+		u32 cli = ctl->data.ring.client_id;
+
+		bp->rx_mode_cl_mask &= ~(1 << cli);
+		bnx2x_set_storm_rx_mode(bp);
+		break;
+	}
+
+	default:
+		BNX2X_ERR("unknown command %x\n", ctl->cmd);
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+static void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
+{
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (bp->flags & USING_MSIX_FLAG) {
+		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+		cp->irq_arr[0].vector = bp->msix_table[1].vector;
+	} else {
+		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+	}
+	cp->irq_arr[0].status_blk = bp->cnic_sb;
+	cp->irq_arr[0].status_blk_num = CNIC_SB_ID(bp);
+	cp->irq_arr[1].status_blk = bp->def_status_blk;
+	cp->irq_arr[1].status_blk_num = DEF_SB_ID;
+
+	cp->num_irq = 2;
+}
+
+static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+			       void *data)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (ops == NULL)
+		return -EINVAL;
+
+	if (atomic_read(&bp->intr_sem) != 0)
+		return -EBUSY;
+
+	bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!bp->cnic_kwq)
+		return -ENOMEM;
+
+	bp->cnic_kwq_cons = bp->cnic_kwq;
+	bp->cnic_kwq_prod = bp->cnic_kwq;
+	bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
+
+	bp->cnic_spq_pending = 0;
+	bp->cnic_kwq_pending = 0;
+
+	bp->cnic_data = data;
+
+	cp->num_irq = 0;
+	cp->drv_state = CNIC_DRV_STATE_REGD;
+
+	bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping, CNIC_SB_ID(bp));
+
+	bnx2x_setup_cnic_irq_info(bp);
+	bnx2x_set_iscsi_eth_mac_addr(bp, 1);
+	bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET;
+	rcu_assign_pointer(bp->cnic_ops, ops);
+
+	return 0;
+}
+
+static int bnx2x_unregister_cnic(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	mutex_lock(&bp->cnic_mutex);
+	if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
+		bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
+		bnx2x_set_iscsi_eth_mac_addr(bp, 0);
+	}
+	cp->drv_state = 0;
+	rcu_assign_pointer(bp->cnic_ops, NULL);
+	mutex_unlock(&bp->cnic_mutex);
+	synchronize_rcu();
+	kfree(bp->cnic_kwq);
+	bp->cnic_kwq = NULL;
+
+	return 0;
+}
+
+struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_owner = THIS_MODULE;
+	cp->chip_id = CHIP_ID(bp);
+	cp->pdev = bp->pdev;
+	cp->io_base = bp->regview;
+	cp->io_base2 = bp->doorbells;
+	cp->max_kwqe_pending = 8;
+	cp->ctx_blk_size = CNIC_CTX_PER_ILT * sizeof(union cdu_context);
+	cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 1;
+	cp->ctx_tbl_len = CNIC_ILT_LINES;
+	cp->starting_cid = BCM_CNIC_CID_START;
+	cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
+	cp->drv_ctl = bnx2x_drv_ctl;
+	cp->drv_register_cnic = bnx2x_register_cnic;
+	cp->drv_unregister_cnic = bnx2x_unregister_cnic;
+
+	return cp;
+}
+EXPORT_SYMBOL(bnx2x_cnic_probe);
+
+#endif /* BCM_CNIC */
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index aa76cba..b668173 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -4772,18 +4772,28 @@
 #define PCI_ID_VAL2					0x438
 
 
-#define MDIO_REG_BANK_CL73_IEEEB0			0x0
-#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL		0x0
+#define MDIO_REG_BANK_CL73_IEEEB0	0x0
+#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL	0x0
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN	0x0200
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN		0x1000
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST	0x8000
 
-#define MDIO_REG_BANK_CL73_IEEEB1			0x10
-#define MDIO_CL73_IEEEB1_AN_ADV2				0x01
+#define MDIO_REG_BANK_CL73_IEEEB1	0x10
+#define MDIO_CL73_IEEEB1_AN_ADV1		0x00
+#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE			0x0400
+#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC		0x0800
+#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH		0x0C00
+#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK		0x0C00
+#define MDIO_CL73_IEEEB1_AN_ADV2		0x01
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M		0x0000
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX		0x0020
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4		0x0040
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR		0x0080
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1		0x03
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE		0x0400
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC		0x0800
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH		0x0C00
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK		0x0C00
 
 #define MDIO_REG_BANK_RX0				0x80b0
 #define MDIO_RX0_RX_STATUS				0x10
@@ -4910,6 +4920,8 @@
 
 
 #define MDIO_REG_BANK_10G_PARALLEL_DETECT		0x8130
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS		0x10
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK		0x8000
 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL		0x11
 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN	0x1
 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK		0x13
@@ -4934,6 +4946,8 @@
 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G			0x0010
 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M			0x0008
 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M			0x0000
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2			0x15
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 		0x0002
 #define MDIO_SERDES_DIGITAL_MISC1				0x18
 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK			0xE000
 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M			0x0000
@@ -5115,6 +5129,7 @@
 #define MDIO_PMA_REG_8481_LED1_MASK	0xa82c
 #define MDIO_PMA_REG_8481_LED2_MASK	0xa82f
 #define MDIO_PMA_REG_8481_LED3_MASK	0xa832
+#define MDIO_PMA_REG_8481_LED3_BLINK	0xa834
 #define MDIO_PMA_REG_8481_SIGNAL_MASK	0xa835
 #define MDIO_PMA_REG_8481_LINK_SIGNAL	0xa83b
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index c3fa31c..d69e683 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -446,6 +446,48 @@
 /////////////////////////////////////////////////////////////////////////////////
 
 /**
+ * __choose_matched - update a port's matched variable from a received lacpdu
+ * @lacpdu: the lacpdu we've received
+ * @port: the port we're looking at
+ *
+ * Update the value of the matched variable, using parameter values from a
+ * newly received lacpdu. Parameter values for the partner carried in the
+ * received PDU are compared with the corresponding operational parameter
+ * values for the actor. Matched is set to TRUE if all of these parameters
+ * match and the PDU parameter partner_state.aggregation has the same value as
+ * actor_oper_port_state.aggregation and lacp will actively maintain the link
+ * in the aggregation. Matched is also set to TRUE if the value of
+ * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates
+ * an individual link and lacp will actively maintain the link. Otherwise,
+ * matched is set to FALSE. LACP is considered to be actively maintaining the
+ * link if either the PDU's actor_state.lacp_activity variable is TRUE or both
+ * the actor's actor_oper_port_state.lacp_activity and the PDU's
+ * partner_state.lacp_activity variables are TRUE.
+ *
+ * Note: the AD_PORT_MATCHED "variable" is not specified by 802.3ad; it is
+ * used here to implement the language from 802.3ad 43.4.9 that requires
+ * recordPDU to "match" the LACPDU parameters to the stored values.
+ */
+static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
+{
+	// check if all parameters are alike
+	if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
+	     (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
+	     !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
+	     (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
+	     (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
+	     ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
+	    // or this is individual link(aggregation == FALSE)
+	    ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0)
+		) {
+		// update the state machine Matched variable
+		port->sm_vars |= AD_PORT_MATCHED;
+	} else {
+		port->sm_vars &= ~AD_PORT_MATCHED;
+	}
+}
+
+/**
  * __record_pdu - record parameters from a received lacpdu
  * @lacpdu: the lacpdu we've received
  * @port: the port we're looking at
@@ -459,6 +501,7 @@
 	if (lacpdu && port) {
 		struct port_params *partner = &port->partner_oper;
 
+		__choose_matched(lacpdu, port);
 		// record the new parameter values for the partner operational
 		partner->port_number = ntohs(lacpdu->actor_port);
 		partner->port_priority = ntohs(lacpdu->actor_port_priority);
@@ -518,12 +561,12 @@
 		const struct port_params *partner = &port->partner_oper;
 
 		// check if any parameter is different
-		if (ntohs(lacpdu->actor_port) != partner->port_number
-		    || ntohs(lacpdu->actor_port_priority) != partner->port_priority
-		    || MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system)
-		    || ntohs(lacpdu->actor_system_priority) != partner->system_priority
-		    || ntohs(lacpdu->actor_key) != partner->key
-		    || (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
+		if (ntohs(lacpdu->actor_port) != partner->port_number ||
+		    ntohs(lacpdu->actor_port_priority) != partner->port_priority ||
+		    MAC_ADDRESS_COMPARE(&lacpdu->actor_system, &partner->system) ||
+		    ntohs(lacpdu->actor_system_priority) != partner->system_priority ||
+		    ntohs(lacpdu->actor_key) != partner->key ||
+		    (lacpdu->actor_state & AD_STATE_AGGREGATION) != (partner->port_state & AD_STATE_AGGREGATION)) {
 			// update the state machine Selected variable
 			port->sm_vars &= ~AD_PORT_SELECTED;
 		}
@@ -549,12 +592,12 @@
 		const struct port_params *oper = &port->partner_oper;
 
 		// check if any parameter is different
-		if (admin->port_number != oper->port_number
-		    || admin->port_priority != oper->port_priority
-		    || MAC_ADDRESS_COMPARE(&admin->system, &oper->system)
-		    || admin->system_priority != oper->system_priority
-		    || admin->key != oper->key
-		    || (admin->port_state & AD_STATE_AGGREGATION)
+		if (admin->port_number != oper->port_number ||
+		    admin->port_priority != oper->port_priority ||
+		    MAC_ADDRESS_COMPARE(&admin->system, &oper->system) ||
+		    admin->system_priority != oper->system_priority ||
+		    admin->key != oper->key ||
+		    (admin->port_state & AD_STATE_AGGREGATION)
 			!= (oper->port_state & AD_STATE_AGGREGATION)) {
 			// update the state machine Selected variable
 			port->sm_vars &= ~AD_PORT_SELECTED;
@@ -563,47 +606,6 @@
 }
 
 /**
- * __choose_matched - update a port's matched variable from a received lacpdu
- * @lacpdu: the lacpdu we've received
- * @port: the port we're looking at
- *
- * Update the value of the matched variable, using parameter values from a
- * newly received lacpdu. Parameter values for the partner carried in the
- * received PDU are compared with the corresponding operational parameter
- * values for the actor. Matched is set to TRUE if all of these parameters
- * match and the PDU parameter partner_state.aggregation has the same value as
- * actor_oper_port_state.aggregation and lacp will actively maintain the link
- * in the aggregation. Matched is also set to TRUE if the value of
- * actor_state.aggregation in the received PDU is set to FALSE, i.e., indicates
- * an individual link and lacp will actively maintain the link. Otherwise,
- * matched is set to FALSE. LACP is considered to be actively maintaining the
- * link if either the PDU's actor_state.lacp_activity variable is TRUE or both
- * the actor's actor_oper_port_state.lacp_activity and the PDU's
- * partner_state.lacp_activity variables are TRUE.
- */
-static void __choose_matched(struct lacpdu *lacpdu, struct port *port)
-{
-	// validate lacpdu and port
-	if (lacpdu && port) {
-		// check if all parameters are alike
-		if (((ntohs(lacpdu->partner_port) == port->actor_port_number) &&
-		     (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) &&
-		     !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) &&
-		     (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) &&
-		     (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) &&
-		     ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) ||
-		    // or this is individual link(aggregation == FALSE)
-		    ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0)
-		   ) {
-			// update the state machine Matched variable
-			port->sm_vars |= AD_PORT_MATCHED;
-		} else {
-			port->sm_vars &= ~AD_PORT_MATCHED;
-		}
-	}
-}
-
-/**
  * __update_ntt - update a port's ntt variable from a received lacpdu
  * @lacpdu: the lacpdu we've received
  * @port: the port we're looking at
@@ -1134,7 +1136,6 @@
 			__update_selected(lacpdu, port);
 			__update_ntt(lacpdu, port);
 			__record_pdu(lacpdu, port);
-			__choose_matched(lacpdu, port);
 			port->sm_rx_timer_counter = __ad_timer_to_ticks(AD_CURRENT_WHILE_TIMER, (u16)(port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT));
 			port->actor_oper_port_state &= ~AD_STATE_EXPIRED;
 			// verify that if the aggregator is enabled, the port is enabled too.
@@ -1956,7 +1957,7 @@
 	struct port *port, *prev_port, *temp_port;
 	struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
 	int select_new_active_agg = 0;
-	
+
 	// find the aggregator related to this slave
 	aggregator = &(SLAVE_AD_INFO(slave).aggregator);
 
@@ -2024,7 +2025,7 @@
 
 				// clear the aggregator
 				ad_clear_agg(aggregator);
-				
+
 				if (select_new_active_agg) {
 					ad_agg_selection_logic(__get_first_agg(port));
 				}
@@ -2075,7 +2076,7 @@
 			}
 		}
 	}
-	port->slave=NULL;	
+	port->slave=NULL;
 }
 
 /**
@@ -2301,7 +2302,7 @@
 }
 
 /*
- * set link state for bonding master: if we have an active 
+ * set link state for bonding master: if we have an active
  * aggregator, we're up, if not, we're down.  Presumes that we cannot
  * have an active aggregator if there are no slaves with link up.
  *
@@ -2395,7 +2396,7 @@
 		goto out;
 	}
 
-	slave_agg_no = bond->xmit_hash_policy(skb, dev, slaves_in_agg);
+	slave_agg_no = bond->xmit_hash_policy(skb, slaves_in_agg);
 
 	bond_for_each_slave(bond, slave, i) {
 		struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
@@ -2445,9 +2446,6 @@
 	struct slave *slave = NULL;
 	int ret = NET_RX_DROP;
 
-	if (dev_net(dev) != &init_net)
-		goto out;
-
 	if (!(dev->flags & IFF_MASTER))
 		goto out;
 
@@ -2468,4 +2466,3 @@
 
 	return ret;
 }
-
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 9b5936f..0d30d1e 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -355,9 +355,6 @@
 	struct arp_pkt *arp = (struct arp_pkt *)skb->data;
 	int res = NET_RX_DROP;
 
-	if (dev_net(bond_dev) != &init_net)
-		goto out;
-
 	while (bond_dev->priv_flags & IFF_802_1Q_VLAN)
 		bond_dev = vlan_dev_real_dev(bond_dev);
 
diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c
index 83921ab..b72e1dc 100644
--- a/drivers/net/bonding/bond_ipv6.c
+++ b/drivers/net/bonding/bond_ipv6.c
@@ -25,6 +25,7 @@
 #include <net/ipv6.h>
 #include <net/ndisc.h>
 #include <net/addrconf.h>
+#include <net/netns/generic.h>
 #include "bonding.h"
 
 /*
@@ -152,11 +153,9 @@
 	struct net_device *vlan_dev, *event_dev = ifa->idev->dev;
 	struct bonding *bond;
 	struct vlan_entry *vlan;
+	struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id);
 
-	if (dev_net(event_dev) != &init_net)
-		return NOTIFY_DONE;
-
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
 			case NETDEV_UP:
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 40fb5ee..af9b9c4 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -75,6 +75,7 @@
 #include <linux/jiffies.h>
 #include <net/route.h>
 #include <net/net_namespace.h>
+#include <net/netns/generic.h>
 #include "bonding.h"
 #include "bond_3ad.h"
 #include "bond_alb.h"
@@ -94,6 +95,7 @@
 static int use_carrier	= 1;
 static char *mode;
 static char *primary;
+static char *primary_reselect;
 static char *lacp_rate;
 static char *ad_select;
 static char *xmit_hash_policy;
@@ -126,6 +128,14 @@
 		       "6 for balance-alb");
 module_param(primary, charp, 0);
 MODULE_PARM_DESC(primary, "Primary network device to use");
+module_param(primary_reselect, charp, 0);
+MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
+				   "once it comes up; "
+				   "0 for always (default), "
+				   "1 for only if speed of primary is "
+				   "better, "
+				   "2 for only on active slave "
+				   "failure");
 module_param(lacp_rate, charp, 0);
 MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
 			    "(slow/fast)");
@@ -148,11 +158,7 @@
 static const char * const version =
 	DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
 
-LIST_HEAD(bond_dev_list);
-
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *bond_proc_dir;
-#endif
+int bond_net_id __read_mostly;
 
 static __be32 arp_target[BOND_MAX_ARP_TARGETS];
 static int arp_ip_count;
@@ -200,6 +206,13 @@
 {	NULL,			-1},
 };
 
+const struct bond_parm_tbl pri_reselect_tbl[] = {
+{	"always",		BOND_PRI_RESELECT_ALWAYS},
+{	"better",		BOND_PRI_RESELECT_BETTER},
+{	"failure",		BOND_PRI_RESELECT_FAILURE},
+{	NULL,			-1},
+};
+
 struct bond_parm_tbl ad_select_tbl[] = {
 {	"stable",	BOND_AD_STABLE},
 {	"bandwidth",	BOND_AD_BANDWIDTH},
@@ -211,7 +224,7 @@
 
 static void bond_send_gratuitous_arp(struct bonding *bond);
 static int bond_init(struct net_device *bond_dev);
-static void bond_deinit(struct net_device *bond_dev);
+static void bond_uninit(struct net_device *bond_dev);
 
 /*---------------------------- General routines -----------------------------*/
 
@@ -1070,6 +1083,25 @@
 
 }
 
+static bool bond_should_change_active(struct bonding *bond)
+{
+	struct slave *prim = bond->primary_slave;
+	struct slave *curr = bond->curr_active_slave;
+
+	if (!prim || !curr || curr->link != BOND_LINK_UP)
+		return true;
+	if (bond->force_primary) {
+		bond->force_primary = false;
+		return true;
+	}
+	if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
+	    (prim->speed < curr->speed ||
+	     (prim->speed == curr->speed && prim->duplex <= curr->duplex)))
+		return false;
+	if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
+		return false;
+	return true;
+}
 
 /**
  * find_best_interface - select the best available slave to be the active one
@@ -1084,7 +1116,7 @@
 	int mintime = bond->params.updelay;
 	int i;
 
-	new_active = old_active = bond->curr_active_slave;
+	new_active = bond->curr_active_slave;
 
 	if (!new_active) { /* there were no active slaves left */
 		if (bond->slave_cnt > 0)   /* found one slave */
@@ -1094,7 +1126,8 @@
 	}
 
 	if ((bond->primary_slave) &&
-	    bond->primary_slave->link == BOND_LINK_UP) {
+	    bond->primary_slave->link == BOND_LINK_UP &&
+	    bond_should_change_active(bond)) {
 		new_active = bond->primary_slave;
 	}
 
@@ -1678,8 +1711,10 @@
 
 	if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
 		/* if there is a primary slave, remember it */
-		if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
+		if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
 			bond->primary_slave = new_slave;
+			bond->force_primary = true;
+		}
 	}
 
 	write_lock_bh(&bond->curr_slave_lock);
@@ -1817,8 +1852,8 @@
 	}
 
 	if (!bond->params.fail_over_mac) {
-		if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr)
-		    && bond->slave_cnt > 1)
+		if (!compare_ether_addr(bond_dev->dev_addr, slave->perm_hwaddr) &&
+		    bond->slave_cnt > 1)
 			pr_warning(DRV_NAME
 			       ": %s: Warning: the permanent HWaddr of %s - "
 			       "%pM - is still in use by %s. "
@@ -1965,25 +2000,6 @@
 }
 
 /*
-* Destroy a bonding device.
-* Must be under rtnl_lock when this function is called.
-*/
-static void bond_uninit(struct net_device *bond_dev)
-{
-	struct bonding *bond = netdev_priv(bond_dev);
-
-	bond_deinit(bond_dev);
-	bond_destroy_sysfs_entry(bond);
-
-	if (bond->wq)
-		destroy_workqueue(bond->wq);
-
-	netif_addr_lock_bh(bond_dev);
-	bond_mc_list_destroy(bond);
-	netif_addr_unlock_bh(bond_dev);
-}
-
-/*
 * First release a slave and than destroy the bond if no more slaves are left.
 * Must be under rtnl_lock when this function is called.
 */
@@ -2567,7 +2583,7 @@
 		fl.fl4_dst = targets[i];
 		fl.fl4_tos = RTO_ONLINK;
 
-		rv = ip_route_output_key(&init_net, &rt, &fl);
+		rv = ip_route_output_key(dev_net(bond->dev), &rt, &fl);
 		if (rv) {
 			if (net_ratelimit()) {
 				pr_warning(DRV_NAME
@@ -2675,9 +2691,6 @@
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
 
-	if (dev_net(dev) != &init_net)
-		goto out;
-
 	if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
 		goto out;
 
@@ -3201,11 +3214,14 @@
 	}
 
 	if (USES_PRIMARY(bond->params.mode)) {
-		seq_printf(seq, "Primary Slave: %s\n",
+		seq_printf(seq, "Primary Slave: %s",
 			   (bond->primary_slave) ?
 			   bond->primary_slave->dev->name : "None");
+		if (bond->primary_slave)
+			seq_printf(seq, " (primary_reselect %s)",
+		   pri_reselect_tbl[bond->params.primary_reselect].modename);
 
-		seq_printf(seq, "Currently Active Slave: %s\n",
+		seq_printf(seq, "\nCurrently Active Slave: %s\n",
 			   (curr) ? curr->dev->name : "None");
 	}
 
@@ -3334,13 +3350,14 @@
 	.release = seq_release,
 };
 
-static int bond_create_proc_entry(struct bonding *bond)
+static void bond_create_proc_entry(struct bonding *bond)
 {
 	struct net_device *bond_dev = bond->dev;
+	struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
 
-	if (bond_proc_dir) {
+	if (bn->proc_dir) {
 		bond->proc_entry = proc_create_data(bond_dev->name,
-						    S_IRUGO, bond_proc_dir,
+						    S_IRUGO, bn->proc_dir,
 						    &bond_info_fops, bond);
 		if (bond->proc_entry == NULL)
 			pr_warning(DRV_NAME
@@ -3349,14 +3366,15 @@
 		else
 			memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
 	}
-
-	return 0;
 }
 
 static void bond_remove_proc_entry(struct bonding *bond)
 {
-	if (bond_proc_dir && bond->proc_entry) {
-		remove_proc_entry(bond->proc_file_name, bond_proc_dir);
+	struct net_device *bond_dev = bond->dev;
+	struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
+
+	if (bn->proc_dir && bond->proc_entry) {
+		remove_proc_entry(bond->proc_file_name, bn->proc_dir);
 		memset(bond->proc_file_name, 0, IFNAMSIZ);
 		bond->proc_entry = NULL;
 	}
@@ -3365,11 +3383,11 @@
 /* Create the bonding directory under /proc/net, if doesn't exist yet.
  * Caller must hold rtnl_lock.
  */
-static void bond_create_proc_dir(void)
+static void bond_create_proc_dir(struct bond_net *bn)
 {
-	if (!bond_proc_dir) {
-		bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
-		if (!bond_proc_dir)
+	if (!bn->proc_dir) {
+		bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
+		if (!bn->proc_dir)
 			pr_warning(DRV_NAME
 				": Warning: cannot create /proc/net/%s\n",
 				DRV_NAME);
@@ -3379,17 +3397,17 @@
 /* Destroy the bonding directory under /proc/net, if empty.
  * Caller must hold rtnl_lock.
  */
-static void bond_destroy_proc_dir(void)
+static void bond_destroy_proc_dir(struct bond_net *bn)
 {
-	if (bond_proc_dir) {
-		remove_proc_entry(DRV_NAME, init_net.proc_net);
-		bond_proc_dir = NULL;
+	if (bn->proc_dir) {
+		remove_proc_entry(DRV_NAME, bn->net->proc_net);
+		bn->proc_dir = NULL;
 	}
 }
 
 #else /* !CONFIG_PROC_FS */
 
-static int bond_create_proc_entry(struct bonding *bond)
+static void bond_create_proc_entry(struct bonding *bond)
 {
 }
 
@@ -3397,11 +3415,11 @@
 {
 }
 
-static void bond_create_proc_dir(void)
+static void bond_create_proc_dir(struct bond_net *bn)
 {
 }
 
-static void bond_destroy_proc_dir(void)
+static void bond_destroy_proc_dir(struct bond_net *bn)
 {
 }
 
@@ -3418,9 +3436,6 @@
 	bond_remove_proc_entry(bond);
 	bond_create_proc_entry(bond);
 
-	bond_destroy_sysfs_entry(bond);
-	bond_create_sysfs_entry(bond);
-
 	return NOTIFY_DONE;
 }
 
@@ -3432,9 +3447,6 @@
 	switch (event) {
 	case NETDEV_CHANGENAME:
 		return bond_event_changename(event_bond);
-	case NETDEV_UNREGISTER:
-		bond_release_all(event_bond->dev);
-		break;
 	default:
 		break;
 	}
@@ -3526,9 +3538,6 @@
 {
 	struct net_device *event_dev = (struct net_device *)ptr;
 
-	if (dev_net(event_dev) != &init_net)
-		return NOTIFY_DONE;
-
 	pr_debug("event_dev: %s, event: %lx\n",
 		(event_dev ? event_dev->name : "None"),
 		event);
@@ -3561,13 +3570,11 @@
 {
 	struct in_ifaddr *ifa = ptr;
 	struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
+	struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id);
 	struct bonding *bond;
 	struct vlan_entry *vlan;
 
-	if (dev_net(ifa->ifa_dev->dev) != &init_net)
-		return NOTIFY_DONE;
-
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
 			case NETDEV_UP:
@@ -3657,8 +3664,7 @@
  * Hash for the output device based upon layer 2 and layer 3 data. If
  * the packet is not IP mimic bond_xmit_hash_policy_l2()
  */
-static int bond_xmit_hash_policy_l23(struct sk_buff *skb,
-				     struct net_device *bond_dev, int count)
+static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 	struct iphdr *iph = ip_hdr(skb);
@@ -3676,8 +3682,7 @@
  * the packet is a frag or not TCP or UDP, just use layer 3 data.  If it is
  * altogether not IP, mimic bond_xmit_hash_policy_l2()
  */
-static int bond_xmit_hash_policy_l34(struct sk_buff *skb,
-				    struct net_device *bond_dev, int count)
+static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 	struct iphdr *iph = ip_hdr(skb);
@@ -3701,8 +3706,7 @@
 /*
  * Hash for the output device based upon layer 2 data
  */
-static int bond_xmit_hash_policy_l2(struct sk_buff *skb,
-				   struct net_device *bond_dev, int count)
+static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 
@@ -3939,7 +3943,7 @@
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);
+	slave_dev = dev_get_by_name(dev_net(bond_dev), ifr->ifr_slave);
 
 	pr_debug("slave_dev=%p: \n", slave_dev);
 
@@ -4295,7 +4299,7 @@
 	if (!BOND_IS_OK(bond))
 		goto out;
 
-	slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt);
+	slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
 
 	bond_for_each_slave(bond, slave, i) {
 		slave_no--;
@@ -4576,37 +4580,29 @@
 		cancel_delayed_work(&bond->ad_work);
 }
 
-/* De-initialize device specific data.
- * Caller must hold rtnl_lock.
- */
-static void bond_deinit(struct net_device *bond_dev)
+/*
+* Destroy a bonding device.
+* Must be under rtnl_lock when this function is called.
+*/
+static void bond_uninit(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
+	/* Release the bonded slaves */
+	bond_release_all(bond_dev);
+
 	list_del(&bond->bond_list);
 
 	bond_work_cancel_all(bond);
 
 	bond_remove_proc_entry(bond);
-}
 
-/* Unregister and free all bond devices.
- * Caller must hold rtnl_lock.
- */
-static void bond_free_all(void)
-{
-	struct bonding *bond, *nxt;
+	if (bond->wq)
+		destroy_workqueue(bond->wq);
 
-	list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) {
-		struct net_device *bond_dev = bond->dev;
-
-		bond_work_cancel_all(bond);
-		/* Release the bonded slaves */
-		bond_release_all(bond_dev);
-		unregister_netdevice(bond_dev);
-	}
-
-	bond_destroy_proc_dir();
+	netif_addr_lock_bh(bond_dev);
+	bond_mc_list_destroy(bond);
+	netif_addr_unlock_bh(bond_dev);
 }
 
 /*------------------------- Module initialization ---------------------------*/
@@ -4646,7 +4642,7 @@
 
 static int bond_check_params(struct bond_params *params)
 {
-	int arp_validate_value, fail_over_mac_value;
+	int arp_validate_value, fail_over_mac_value, primary_reselect_value;
 
 	/*
 	 * Convert string parameters.
@@ -4665,7 +4661,8 @@
 		if ((bond_mode != BOND_MODE_XOR) &&
 		    (bond_mode != BOND_MODE_8023AD)) {
 			pr_info(DRV_NAME
-			       ": xor_mode param is irrelevant in mode %s\n",
+				": xmit_hash_policy param is irrelevant in"
+				" mode %s\n",
 			       bond_mode_name(bond_mode));
 		} else {
 			xmit_hashtype = bond_parse_parm(xmit_hash_policy,
@@ -4945,6 +4942,20 @@
 		primary = NULL;
 	}
 
+	if (primary && primary_reselect) {
+		primary_reselect_value = bond_parse_parm(primary_reselect,
+							 pri_reselect_tbl);
+		if (primary_reselect_value == -1) {
+			pr_err(DRV_NAME
+			       ": Error: Invalid primary_reselect \"%s\"\n",
+			       primary_reselect ==
+					NULL ? "NULL" : primary_reselect);
+			return -EINVAL;
+		}
+	} else {
+		primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
+	}
+
 	if (fail_over_mac) {
 		fail_over_mac_value = bond_parse_parm(fail_over_mac,
 						      fail_over_mac_tbl);
@@ -4976,6 +4987,7 @@
 	params->use_carrier = use_carrier;
 	params->lacp_fast = lacp_fast;
 	params->primary[0] = 0;
+	params->primary_reselect = primary_reselect_value;
 	params->fail_over_mac = fail_over_mac_value;
 
 	if (primary) {
@@ -5012,6 +5024,7 @@
 static int bond_init(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
+	struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
 
 	pr_debug("Begin bond_init for %s\n", bond_dev->name);
 
@@ -5024,30 +5037,41 @@
 	netif_carrier_off(bond_dev);
 
 	bond_create_proc_entry(bond);
-	list_add_tail(&bond->bond_list, &bond_dev_list);
+	list_add_tail(&bond->bond_list, &bn->dev_list);
 
+	bond_prepare_sysfs_group(bond);
 	return 0;
 }
 
+static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+	if (tb[IFLA_ADDRESS]) {
+		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+			return -EINVAL;
+		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+			return -EADDRNOTAVAIL;
+	}
+	return 0;
+}
+
+static struct rtnl_link_ops bond_link_ops __read_mostly = {
+	.kind		= "bond",
+	.priv_size	= sizeof(struct bonding),
+	.setup		= bond_setup,
+	.validate	= bond_validate,
+};
+
 /* Create a new bond based on the specified name and bonding parameters.
  * If name is NULL, obtain a suitable "bond%d" name for us.
  * Caller must NOT hold rtnl_lock; we need to release it here before we
  * set up our sysfs entries.
  */
-int bond_create(const char *name)
+int bond_create(struct net *net, const char *name)
 {
 	struct net_device *bond_dev;
 	int res;
 
 	rtnl_lock();
-	/* Check to see if the bond already exists. */
-	/* FIXME: pass netns from caller */
-	if (name && __dev_get_by_name(&init_net, name)) {
-		pr_err(DRV_NAME ": cannot add bond %s; already exists\n",
-		       name);
-		res = -EEXIST;
-		goto out_rtnl;
-	}
 
 	bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
 				bond_setup);
@@ -5055,9 +5079,12 @@
 		pr_err(DRV_NAME ": %s: eek! can't alloc netdev!\n",
 		       name);
 		res = -ENOMEM;
-		goto out_rtnl;
+		goto out;
 	}
 
+	dev_net_set(bond_dev, net);
+	bond_dev->rtnl_link_ops = &bond_link_ops;
+
 	if (!name) {
 		res = dev_alloc_name(bond_dev, "bond%d");
 		if (res < 0)
@@ -5065,27 +5092,41 @@
 	}
 
 	res = register_netdevice(bond_dev);
-	if (res < 0)
-		goto out_bond;
 
-	res = bond_create_sysfs_entry(netdev_priv(bond_dev));
-	if (res < 0)
-		goto out_unreg;
-
-	rtnl_unlock();
-	return 0;
-
-out_unreg:
-	unregister_netdevice(bond_dev);
-out_bond:
-	bond_deinit(bond_dev);
-out_netdev:
-	free_netdev(bond_dev);
-out_rtnl:
+out:
 	rtnl_unlock();
 	return res;
+out_netdev:
+	free_netdev(bond_dev);
+	goto out;
 }
 
+static int bond_net_init(struct net *net)
+{
+	struct bond_net *bn = net_generic(net, bond_net_id);
+
+	bn->net = net;
+	INIT_LIST_HEAD(&bn->dev_list);
+
+	bond_create_proc_dir(bn);
+	
+	return 0;
+}
+
+static void bond_net_exit(struct net *net)
+{
+	struct bond_net *bn = net_generic(net, bond_net_id);
+
+	bond_destroy_proc_dir(bn);
+}
+
+static struct pernet_operations bond_net_ops = {
+	.init = bond_net_init,
+	.exit = bond_net_exit,
+	.id   = &bond_net_id,
+	.size = sizeof(struct bond_net),
+};
+
 static int __init bonding_init(void)
 {
 	int i;
@@ -5097,10 +5138,16 @@
 	if (res)
 		goto out;
 
-	bond_create_proc_dir();
+	res = register_pernet_subsys(&bond_net_ops);
+	if (res)
+		goto out;
+
+	res = rtnl_link_register(&bond_link_ops);
+	if (res)
+		goto err_link;
 
 	for (i = 0; i < max_bonds; i++) {
-		res = bond_create(NULL);
+		res = bond_create(&init_net, NULL);
 		if (res)
 			goto err;
 	}
@@ -5112,14 +5159,13 @@
 	register_netdevice_notifier(&bond_netdev_notifier);
 	register_inetaddr_notifier(&bond_inetaddr_notifier);
 	bond_register_ipv6_notifier();
-
-	goto out;
-err:
-	rtnl_lock();
-	bond_free_all();
-	rtnl_unlock();
 out:
 	return res;
+err:
+	rtnl_link_unregister(&bond_link_ops);
+err_link:
+	unregister_pernet_subsys(&bond_net_ops);
+	goto out;
 
 }
 
@@ -5131,9 +5177,8 @@
 
 	bond_destroy_sysfs();
 
-	rtnl_lock();
-	bond_free_all();
-	rtnl_unlock();
+	rtnl_link_unregister(&bond_link_ops);
+	unregister_pernet_subsys(&bond_net_ops);
 }
 
 module_init(bonding_init);
@@ -5142,3 +5187,4 @@
 MODULE_VERSION(DRV_VERSION);
 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
+MODULE_ALIAS_RTNL_LINK("bond");
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 8762a27..4e00b4f 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -36,6 +36,8 @@
 #include <linux/rtnetlink.h>
 #include <linux/etherdevice.h>
 #include <net/net_namespace.h>
+#include <net/netns/generic.h>
+#include <linux/nsproxy.h>
 
 #include "bonding.h"
 
@@ -48,12 +50,14 @@
  */
 static ssize_t bonding_show_bonds(struct class *cls, char *buf)
 {
+	struct net *net = current->nsproxy->net_ns;
+	struct bond_net *bn = net_generic(net, bond_net_id);
 	int res = 0;
 	struct bonding *bond;
 
 	rtnl_lock();
 
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (res > (PAGE_SIZE - IFNAMSIZ)) {
 			/* not enough space for another interface name */
 			if ((PAGE_SIZE - res) > 10)
@@ -70,11 +74,12 @@
 	return res;
 }
 
-static struct net_device *bond_get_by_name(const char *ifname)
+static struct net_device *bond_get_by_name(struct net *net, const char *ifname)
 {
+	struct bond_net *bn = net_generic(net, bond_net_id);
 	struct bonding *bond;
 
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (strncmp(bond->dev->name, ifname, IFNAMSIZ) == 0)
 			return bond->dev;
 	}
@@ -92,6 +97,7 @@
 static ssize_t bonding_store_bonds(struct class *cls,
 				   const char *buffer, size_t count)
 {
+	struct net *net = current->nsproxy->net_ns;
 	char command[IFNAMSIZ + 1] = {0, };
 	char *ifname;
 	int rv, res = count;
@@ -105,7 +111,7 @@
 	if (command[0] == '+') {
 		pr_info(DRV_NAME
 			": %s is being created...\n", ifname);
-		rv = bond_create(ifname);
+		rv = bond_create(net, ifname);
 		if (rv) {
 			pr_info(DRV_NAME ": Bond creation failed.\n");
 			res = rv;
@@ -114,7 +120,7 @@
 		struct net_device *bond_dev;
 
 		rtnl_lock();
-		bond_dev = bond_get_by_name(ifname);
+		bond_dev = bond_get_by_name(net, ifname);
 		if (bond_dev) {
 			pr_info(DRV_NAME ": %s is being deleted...\n",
 				ifname);
@@ -239,8 +245,7 @@
 		/* Got a slave name in ifname.  Is it already in the list? */
 		found = 0;
 
-		/* FIXME: get netns from sysfs object */
-		dev = __dev_get_by_name(&init_net, ifname);
+		dev = __dev_get_by_name(dev_net(bond->dev), ifname);
 		if (!dev) {
 			pr_info(DRV_NAME
 			       ": %s: Interface %s does not exist!\n",
@@ -1214,6 +1219,58 @@
 		   bonding_show_primary, bonding_store_primary);
 
 /*
+ * Show and set the primary_reselect flag.
+ */
+static ssize_t bonding_show_primary_reselect(struct device *d,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct bonding *bond = to_bond(d);
+
+	return sprintf(buf, "%s %d\n",
+		       pri_reselect_tbl[bond->params.primary_reselect].modename,
+		       bond->params.primary_reselect);
+}
+
+static ssize_t bonding_store_primary_reselect(struct device *d,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int new_value, ret = count;
+	struct bonding *bond = to_bond(d);
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	new_value = bond_parse_parm(buf, pri_reselect_tbl);
+	if (new_value < 0)  {
+		pr_err(DRV_NAME
+		       ": %s: Ignoring invalid primary_reselect value %.*s.\n",
+		       bond->dev->name,
+		       (int) strlen(buf) - 1, buf);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	bond->params.primary_reselect = new_value;
+	pr_info(DRV_NAME ": %s: setting primary_reselect to %s (%d).\n",
+		bond->dev->name, pri_reselect_tbl[new_value].modename,
+		new_value);
+
+	read_lock(&bond->lock);
+	write_lock_bh(&bond->curr_slave_lock);
+	bond_select_active_slave(bond);
+	write_unlock_bh(&bond->curr_slave_lock);
+	read_unlock(&bond->lock);
+out:
+	rtnl_unlock();
+	return ret;
+}
+static DEVICE_ATTR(primary_reselect, S_IRUGO | S_IWUSR,
+		   bonding_show_primary_reselect,
+		   bonding_store_primary_reselect);
+
+/*
  * Show and set the use_carrier flag.
  */
 static ssize_t bonding_show_carrier(struct device *d,
@@ -1502,6 +1559,7 @@
 	&dev_attr_num_unsol_na.attr,
 	&dev_attr_miimon.attr,
 	&dev_attr_primary.attr,
+	&dev_attr_primary_reselect.attr,
 	&dev_attr_use_carrier.attr,
 	&dev_attr_active_slave.attr,
 	&dev_attr_mii_status.attr,
@@ -1564,24 +1622,8 @@
  * Initialize sysfs for each bond.  This sets up and registers
  * the 'bondctl' directory for each individual bond under /sys/class/net.
  */
-int bond_create_sysfs_entry(struct bonding *bond)
+void bond_prepare_sysfs_group(struct bonding *bond)
 {
-	struct net_device *dev = bond->dev;
-	int err;
-
-	err = sysfs_create_group(&(dev->dev.kobj), &bonding_group);
-	if (err)
-		pr_emerg("eek! didn't create group!\n");
-
-	return err;
-}
-/*
- * Remove sysfs entries for each bond.
- */
-void bond_destroy_sysfs_entry(struct bonding *bond)
-{
-	struct net_device *dev = bond->dev;
-
-	sysfs_remove_group(&(dev->dev.kobj), &bonding_group);
+	bond->dev->sysfs_groups[0] = &bonding_group;
 }
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6824771..558ec13 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -23,15 +23,13 @@
 #include "bond_3ad.h"
 #include "bond_alb.h"
 
-#define DRV_VERSION	"3.5.0"
-#define DRV_RELDATE	"November 4, 2008"
+#define DRV_VERSION	"3.6.0"
+#define DRV_RELDATE	"September 26, 2009"
 #define DRV_NAME	"bonding"
 #define DRV_DESCRIPTION	"Ethernet Channel Bonding Driver"
 
 #define BOND_MAX_ARP_TARGETS	16
 
-extern struct list_head bond_dev_list;
-
 #define IS_UP(dev)					   \
 	      ((((dev)->flags & IFF_UP) == IFF_UP)	&& \
 	       netif_running(dev)			&& \
@@ -131,6 +129,7 @@
 	int lacp_fast;
 	int ad_select;
 	char primary[IFNAMSIZ];
+	int primary_reselect;
 	__be32 arp_targets[BOND_MAX_ARP_TARGETS];
 };
 
@@ -190,6 +189,7 @@
 	struct   slave *curr_active_slave;
 	struct   slave *current_arp_slave;
 	struct   slave *primary_slave;
+	bool     force_primary;
 	s32      slave_cnt; /* never change this value outside the attach/detach wrappers */
 	rwlock_t lock;
 	rwlock_t curr_slave_lock;
@@ -204,7 +204,7 @@
 #endif /* CONFIG_PROC_FS */
 	struct   list_head bond_list;
 	struct   dev_mc_list *mc_list;
-	int      (*xmit_hash_policy)(struct sk_buff *, struct net_device *, int);
+	int      (*xmit_hash_policy)(struct sk_buff *, int);
 	__be32   master_ip;
 	u16      flags;
 	u16      rr_tx_counter;
@@ -254,10 +254,14 @@
 
 static inline bool bond_is_lb(const struct bonding *bond)
 {
-	return bond->params.mode == BOND_MODE_TLB
-		|| bond->params.mode == BOND_MODE_ALB;
+	return (bond->params.mode == BOND_MODE_TLB ||
+		bond->params.mode == BOND_MODE_ALB);
 }
 
+#define BOND_PRI_RESELECT_ALWAYS	0
+#define BOND_PRI_RESELECT_BETTER	1
+#define BOND_PRI_RESELECT_FAILURE	2
+
 #define BOND_FOM_NONE			0
 #define BOND_FOM_ACTIVE			1
 #define BOND_FOM_FOLLOW			2
@@ -321,12 +325,11 @@
 
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
-int bond_create(const char *name);
+int bond_create(struct net *net, const char *name);
 int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_create_sysfs(void);
 void bond_destroy_sysfs(void);
-void bond_destroy_sysfs_entry(struct bonding *bond);
-int bond_create_sysfs_entry(struct bonding *bond);
+void bond_prepare_sysfs_group(struct bonding *bond);
 int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave);
 void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave);
 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev);
@@ -341,13 +344,22 @@
 void bond_register_arp(struct bonding *);
 void bond_unregister_arp(struct bonding *);
 
+struct bond_net {
+	struct net *		net;	/* Associated network namespace */
+	struct list_head	dev_list;
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *	proc_dir;
+#endif
+};
+
 /* exported from bond_main.c */
-extern struct list_head bond_dev_list;
+extern int bond_net_id;
 extern const struct bond_parm_tbl bond_lacp_tbl[];
 extern const struct bond_parm_tbl bond_mode_tbl[];
 extern const struct bond_parm_tbl xmit_hashtype_tbl[];
 extern const struct bond_parm_tbl arp_validate_tbl[];
 extern const struct bond_parm_tbl fail_over_mac_tbl[];
+extern const struct bond_parm_tbl pri_reselect_tbl[];
 extern struct bond_parm_tbl ad_select_tbl[];
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -370,4 +382,3 @@
 #endif
 
 #endif /* _LINUX_BONDING_H */
-
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 772f6d2..bb803fa 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -41,6 +41,21 @@
 	---help---
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
 
+config CAN_TI_HECC
+	depends on CAN_DEV && ARCH_OMAP3
+	tristate "TI High End CAN Controller"
+	---help---
+	  Driver for TI HECC (High End CAN Controller) module found on many
+	  TI devices. The device specifications are available from www.ti.com
+
+config CAN_MCP251X
+	tristate "Microchip MCP251x SPI CAN controllers"
+	depends on CAN_DEV && SPI
+	---help---
+	  Driver for the Microchip MCP251x SPI CAN controllers.
+
+source "drivers/net/can/mscan/Kconfig"
+
 source "drivers/net/can/sja1000/Kconfig"
 
 source "drivers/net/can/usb/Kconfig"
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 0dea627..56899fe 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -10,6 +10,9 @@
 obj-y				+= usb/
 
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
+obj-$(CONFIG_CAN_MSCAN)		+= mscan/
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
+obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o
+obj-$(CONFIG_CAN_MCP251X)	+= mcp251x.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f67ae28..cbe3fce 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -221,38 +221,6 @@
 	set_mb_mode_prio(priv, mb, mode, 0);
 }
 
-static struct sk_buff *alloc_can_skb(struct net_device *dev,
-		struct can_frame **cf)
-{
-	struct sk_buff *skb;
-
-	skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
-	if (unlikely(!skb))
-		return NULL;
-
-	skb->protocol = htons(ETH_P_CAN);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-
-	return skb;
-}
-
-static struct sk_buff *alloc_can_err_skb(struct net_device *dev,
-		struct can_frame **cf)
-{
-	struct sk_buff *skb;
-
-	skb = alloc_can_skb(dev, cf);
-	if (unlikely(!skb))
-		return NULL;
-
-	memset(*cf, 0, sizeof(struct can_frame));
-	(*cf)->can_id = CAN_ERR_FLAG;
-	(*cf)->can_dlc = CAN_ERR_DLC;
-
-	return skb;
-}
-
 /*
  * Swtich transceiver on or off
  */
@@ -1087,7 +1055,7 @@
 		goto exit_release;
 	}
 
-	dev = alloc_candev(sizeof(struct at91_priv));
+	dev = alloc_candev(sizeof(struct at91_priv), AT91_MB_TX_NUM);
 	if (!dev) {
 		err = -ENOMEM;
 		goto exit_iounmap;
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 2868fe8..c1bb29f 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -245,7 +245,7 @@
 	struct net_device_stats *stats = &dev->stats;
 	int i;
 
-	for (i = 0; i < CAN_ECHO_SKB_MAX; i++) {
+	for (i = 0; i < priv->echo_skb_max; i++) {
 		if (priv->echo_skb[i]) {
 			kfree_skb(priv->echo_skb[i]);
 			priv->echo_skb[i] = NULL;
@@ -262,10 +262,13 @@
  * of the device driver. The driver must protect access to
  * priv->echo_skb, if necessary.
  */
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx)
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		      unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
+	BUG_ON(idx >= priv->echo_skb_max);
+
 	/* check flag whether this packet has to be looped back */
 	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
 		kfree_skb(skb);
@@ -311,10 +314,12 @@
  * is handled in the device driver. The driver must protect
  * access to priv->echo_skb, if necessary.
  */
-void can_get_echo_skb(struct net_device *dev, int idx)
+void can_get_echo_skb(struct net_device *dev, unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
+	BUG_ON(idx >= priv->echo_skb_max);
+
 	if (priv->echo_skb[idx]) {
 		netif_rx(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
@@ -327,10 +332,12 @@
   *
   * The function is typically called when TX failed.
   */
-void can_free_echo_skb(struct net_device *dev, int idx)
+void can_free_echo_skb(struct net_device *dev, unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
+	BUG_ON(idx >= priv->echo_skb_max);
+
 	if (priv->echo_skb[idx]) {
 		kfree_skb(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
@@ -359,17 +366,12 @@
 	can_flush_echo_skb(dev);
 
 	/* send restart message upstream */
-	skb = dev_alloc_skb(sizeof(struct can_frame));
+	skb = alloc_can_err_skb(dev, &cf);
 	if (skb == NULL) {
 		err = -ENOMEM;
 		goto restart;
 	}
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CAN);
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
-	cf->can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED;
-	cf->can_dlc = CAN_ERR_DLC;
+	cf->can_id |= CAN_ERR_RESTARTED;
 
 	netif_rx(skb);
 
@@ -442,20 +444,66 @@
 	dev->features = NETIF_F_NO_CSUM;
 }
 
+struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
+{
+	struct sk_buff *skb;
+
+	skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
+	if (unlikely(!skb))
+		return NULL;
+
+	skb->protocol = htons(ETH_P_CAN);
+	skb->pkt_type = PACKET_BROADCAST;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(*cf, 0, sizeof(struct can_frame));
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_can_skb);
+
+struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_can_skb(dev, cf);
+	if (unlikely(!skb))
+		return NULL;
+
+	(*cf)->can_id = CAN_ERR_FLAG;
+	(*cf)->can_dlc = CAN_ERR_DLC;
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_can_err_skb);
+
 /*
  * Allocate and setup space for the CAN network device
  */
-struct net_device *alloc_candev(int sizeof_priv)
+struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max)
 {
 	struct net_device *dev;
 	struct can_priv *priv;
+	int size;
 
-	dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
+	if (echo_skb_max)
+		size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) +
+			echo_skb_max * sizeof(struct sk_buff *);
+	else
+		size = sizeof_priv;
+
+	dev = alloc_netdev(size, "can%d", can_setup);
 	if (!dev)
 		return NULL;
 
 	priv = netdev_priv(dev);
 
+	if (echo_skb_max) {
+		priv->echo_skb_max = echo_skb_max;
+		priv->echo_skb = (void *)priv +
+			ALIGN(sizeof_priv, sizeof(struct sk_buff *));
+	}
+
 	priv->state = CAN_STATE_STOPPED;
 
 	init_timer(&priv->restart_timer);
@@ -647,7 +695,7 @@
 	return -EMSGSIZE;
 }
 
-static int can_newlink(struct net_device *dev,
+static int can_newlink(struct net *src_net, struct net_device *dev,
 		       struct nlattr *tb[], struct nlattr *data[])
 {
 	return -EOPNOTSUPP;
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
new file mode 100644
index 0000000..78b1b69
--- /dev/null
+++ b/drivers/net/can/mcp251x.c
@@ -0,0 +1,1166 @@
+/*
+ * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ *
+ * MCP2510 support and bug fixes by Christian Pellegrin
+ * <chripell@evolware.org>
+ *
+ * Copyright 2009 Christian Pellegrin EVOL S.r.l.
+ *
+ * Copyright 2007 Raymarine UK, Ltd. All Rights Reserved.
+ * Written under contract by:
+ *   Chris Elston, Katalix Systems, Ltd.
+ *
+ * Based on Microchip MCP251x CAN controller driver written by
+ * David Vrabel, Copyright 2006 Arcom Control Systems Ltd.
+ *
+ * Based on CAN bus driver for the CCAN controller written by
+ * - Sascha Hauer, Marc Kleine-Budde, Pengutronix
+ * - Simon Kallweit, intefo AG
+ * Copyright 2007
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ *
+ *
+ * Your platform definition file should specify something like:
+ *
+ * static struct mcp251x_platform_data mcp251x_info = {
+ *         .oscillator_frequency = 8000000,
+ *         .board_specific_setup = &mcp251x_setup,
+ *         .model = CAN_MCP251X_MCP2510,
+ *         .power_enable = mcp251x_power_enable,
+ *         .transceiver_enable = NULL,
+ * };
+ *
+ * static struct spi_board_info spi_board_info[] = {
+ *         {
+ *                 .modalias = "mcp251x",
+ *                 .platform_data = &mcp251x_info,
+ *                 .irq = IRQ_EINT13,
+ *                 .max_speed_hz = 2*1000*1000,
+ *                 .chip_select = 2,
+ *         },
+ * };
+ *
+ * Please see mcp251x.h for a description of the fields in
+ * struct mcp251x_platform_data.
+ *
+ */
+
+#include <linux/can.h>
+#include <linux/can/core.h>
+#include <linux/can/dev.h>
+#include <linux/can/platform/mcp251x.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/freezer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/uaccess.h>
+
+/* SPI interface instruction set */
+#define INSTRUCTION_WRITE	0x02
+#define INSTRUCTION_READ	0x03
+#define INSTRUCTION_BIT_MODIFY	0x05
+#define INSTRUCTION_LOAD_TXB(n)	(0x40 + 2 * (n))
+#define INSTRUCTION_READ_RXB(n)	(((n) == 0) ? 0x90 : 0x94)
+#define INSTRUCTION_RESET	0xC0
+
+/* MPC251x registers */
+#define CANSTAT	      0x0e
+#define CANCTRL	      0x0f
+#  define CANCTRL_REQOP_MASK	    0xe0
+#  define CANCTRL_REQOP_CONF	    0x80
+#  define CANCTRL_REQOP_LISTEN_ONLY 0x60
+#  define CANCTRL_REQOP_LOOPBACK    0x40
+#  define CANCTRL_REQOP_SLEEP	    0x20
+#  define CANCTRL_REQOP_NORMAL	    0x00
+#  define CANCTRL_OSM		    0x08
+#  define CANCTRL_ABAT		    0x10
+#define TEC	      0x1c
+#define REC	      0x1d
+#define CNF1	      0x2a
+#  define CNF1_SJW_SHIFT   6
+#define CNF2	      0x29
+#  define CNF2_BTLMODE	   0x80
+#  define CNF2_SAM         0x40
+#  define CNF2_PS1_SHIFT   3
+#define CNF3	      0x28
+#  define CNF3_SOF	   0x08
+#  define CNF3_WAKFIL	   0x04
+#  define CNF3_PHSEG2_MASK 0x07
+#define CANINTE	      0x2b
+#  define CANINTE_MERRE 0x80
+#  define CANINTE_WAKIE 0x40
+#  define CANINTE_ERRIE 0x20
+#  define CANINTE_TX2IE 0x10
+#  define CANINTE_TX1IE 0x08
+#  define CANINTE_TX0IE 0x04
+#  define CANINTE_RX1IE 0x02
+#  define CANINTE_RX0IE 0x01
+#define CANINTF	      0x2c
+#  define CANINTF_MERRF 0x80
+#  define CANINTF_WAKIF 0x40
+#  define CANINTF_ERRIF 0x20
+#  define CANINTF_TX2IF 0x10
+#  define CANINTF_TX1IF 0x08
+#  define CANINTF_TX0IF 0x04
+#  define CANINTF_RX1IF 0x02
+#  define CANINTF_RX0IF 0x01
+#define EFLG	      0x2d
+#  define EFLG_EWARN	0x01
+#  define EFLG_RXWAR	0x02
+#  define EFLG_TXWAR	0x04
+#  define EFLG_RXEP	0x08
+#  define EFLG_TXEP	0x10
+#  define EFLG_TXBO	0x20
+#  define EFLG_RX0OVR	0x40
+#  define EFLG_RX1OVR	0x80
+#define TXBCTRL(n)  (((n) * 0x10) + 0x30 + TXBCTRL_OFF)
+#  define TXBCTRL_ABTF	0x40
+#  define TXBCTRL_MLOA	0x20
+#  define TXBCTRL_TXERR 0x10
+#  define TXBCTRL_TXREQ 0x08
+#define TXBSIDH(n)  (((n) * 0x10) + 0x30 + TXBSIDH_OFF)
+#  define SIDH_SHIFT    3
+#define TXBSIDL(n)  (((n) * 0x10) + 0x30 + TXBSIDL_OFF)
+#  define SIDL_SID_MASK    7
+#  define SIDL_SID_SHIFT   5
+#  define SIDL_EXIDE_SHIFT 3
+#  define SIDL_EID_SHIFT   16
+#  define SIDL_EID_MASK    3
+#define TXBEID8(n)  (((n) * 0x10) + 0x30 + TXBEID8_OFF)
+#define TXBEID0(n)  (((n) * 0x10) + 0x30 + TXBEID0_OFF)
+#define TXBDLC(n)   (((n) * 0x10) + 0x30 + TXBDLC_OFF)
+#  define DLC_RTR_SHIFT    6
+#define TXBCTRL_OFF 0
+#define TXBSIDH_OFF 1
+#define TXBSIDL_OFF 2
+#define TXBEID8_OFF 3
+#define TXBEID0_OFF 4
+#define TXBDLC_OFF  5
+#define TXBDAT_OFF  6
+#define RXBCTRL(n)  (((n) * 0x10) + 0x60 + RXBCTRL_OFF)
+#  define RXBCTRL_BUKT	0x04
+#  define RXBCTRL_RXM0	0x20
+#  define RXBCTRL_RXM1	0x40
+#define RXBSIDH(n)  (((n) * 0x10) + 0x60 + RXBSIDH_OFF)
+#  define RXBSIDH_SHIFT 3
+#define RXBSIDL(n)  (((n) * 0x10) + 0x60 + RXBSIDL_OFF)
+#  define RXBSIDL_IDE   0x08
+#  define RXBSIDL_EID   3
+#  define RXBSIDL_SHIFT 5
+#define RXBEID8(n)  (((n) * 0x10) + 0x60 + RXBEID8_OFF)
+#define RXBEID0(n)  (((n) * 0x10) + 0x60 + RXBEID0_OFF)
+#define RXBDLC(n)   (((n) * 0x10) + 0x60 + RXBDLC_OFF)
+#  define RXBDLC_LEN_MASK  0x0f
+#  define RXBDLC_RTR       0x40
+#define RXBCTRL_OFF 0
+#define RXBSIDH_OFF 1
+#define RXBSIDL_OFF 2
+#define RXBEID8_OFF 3
+#define RXBEID0_OFF 4
+#define RXBDLC_OFF  5
+#define RXBDAT_OFF  6
+
+#define GET_BYTE(val, byte)			\
+	(((val) >> ((byte) * 8)) & 0xff)
+#define SET_BYTE(val, byte)			\
+	(((val) & 0xff) << ((byte) * 8))
+
+/*
+ * Buffer size required for the largest SPI transfer (i.e., reading a
+ * frame)
+ */
+#define CAN_FRAME_MAX_DATA_LEN	8
+#define SPI_TRANSFER_BUF_LEN	(6 + CAN_FRAME_MAX_DATA_LEN)
+#define CAN_FRAME_MAX_BITS	128
+
+#define TX_ECHO_SKB_MAX	1
+
+#define DEVICE_NAME "mcp251x"
+
+static int mcp251x_enable_dma; /* Enable SPI DMA. Default: 0 (Off) */
+module_param(mcp251x_enable_dma, int, S_IRUGO);
+MODULE_PARM_DESC(mcp251x_enable_dma, "Enable SPI DMA. Default: 0 (Off)");
+
+static struct can_bittiming_const mcp251x_bittiming_const = {
+	.name = DEVICE_NAME,
+	.tseg1_min = 3,
+	.tseg1_max = 16,
+	.tseg2_min = 2,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+struct mcp251x_priv {
+	struct can_priv	   can;
+	struct net_device *net;
+	struct spi_device *spi;
+
+	struct mutex spi_lock; /* SPI buffer lock */
+	u8 *spi_tx_buf;
+	u8 *spi_rx_buf;
+	dma_addr_t spi_tx_dma;
+	dma_addr_t spi_rx_dma;
+
+	struct sk_buff *tx_skb;
+	int tx_len;
+	struct workqueue_struct *wq;
+	struct work_struct tx_work;
+	struct work_struct irq_work;
+	struct completion awake;
+	int wake;
+	int force_quit;
+	int after_suspend;
+#define AFTER_SUSPEND_UP 1
+#define AFTER_SUSPEND_DOWN 2
+#define AFTER_SUSPEND_POWER 4
+#define AFTER_SUSPEND_RESTART 8
+	int restart_tx;
+};
+
+static void mcp251x_clean(struct net_device *net)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+
+	net->stats.tx_errors++;
+	if (priv->tx_skb)
+		dev_kfree_skb(priv->tx_skb);
+	if (priv->tx_len)
+		can_free_echo_skb(priv->net, 0);
+	priv->tx_skb = NULL;
+	priv->tx_len = 0;
+}
+
+/*
+ * Note about handling of error return of mcp251x_spi_trans: accessing
+ * registers via SPI is not really different conceptually than using
+ * normal I/O assembler instructions, although it's much more
+ * complicated from a practical POV. So it's not advisable to always
+ * check the return value of this function. Imagine that every
+ * read{b,l}, write{b,l} and friends would be bracketed in "if ( < 0)
+ * error();", it would be a great mess (well there are some situation
+ * when exception handling C++ like could be useful after all). So we
+ * just check that transfers are OK at the beginning of our
+ * conversation with the chip and to avoid doing really nasty things
+ * (like injecting bogus packets in the network stack).
+ */
+static int mcp251x_spi_trans(struct spi_device *spi, int len)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	struct spi_transfer t = {
+		.tx_buf = priv->spi_tx_buf,
+		.rx_buf = priv->spi_rx_buf,
+		.len = len,
+		.cs_change = 0,
+	};
+	struct spi_message m;
+	int ret;
+
+	spi_message_init(&m);
+
+	if (mcp251x_enable_dma) {
+		t.tx_dma = priv->spi_tx_dma;
+		t.rx_dma = priv->spi_rx_dma;
+		m.is_dma_mapped = 1;
+	}
+
+	spi_message_add_tail(&t, &m);
+
+	ret = spi_sync(spi, &m);
+	if (ret)
+		dev_err(&spi->dev, "spi transfer failed: ret = %d\n", ret);
+	return ret;
+}
+
+static u8 mcp251x_read_reg(struct spi_device *spi, uint8_t reg)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	u8 val = 0;
+
+	mutex_lock(&priv->spi_lock);
+
+	priv->spi_tx_buf[0] = INSTRUCTION_READ;
+	priv->spi_tx_buf[1] = reg;
+
+	mcp251x_spi_trans(spi, 3);
+	val = priv->spi_rx_buf[2];
+
+	mutex_unlock(&priv->spi_lock);
+
+	return val;
+}
+
+static void mcp251x_write_reg(struct spi_device *spi, u8 reg, uint8_t val)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+	mutex_lock(&priv->spi_lock);
+
+	priv->spi_tx_buf[0] = INSTRUCTION_WRITE;
+	priv->spi_tx_buf[1] = reg;
+	priv->spi_tx_buf[2] = val;
+
+	mcp251x_spi_trans(spi, 3);
+
+	mutex_unlock(&priv->spi_lock);
+}
+
+static void mcp251x_write_bits(struct spi_device *spi, u8 reg,
+			       u8 mask, uint8_t val)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+	mutex_lock(&priv->spi_lock);
+
+	priv->spi_tx_buf[0] = INSTRUCTION_BIT_MODIFY;
+	priv->spi_tx_buf[1] = reg;
+	priv->spi_tx_buf[2] = mask;
+	priv->spi_tx_buf[3] = val;
+
+	mcp251x_spi_trans(spi, 4);
+
+	mutex_unlock(&priv->spi_lock);
+}
+
+static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
+				int len, int tx_buf_idx)
+{
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+	if (pdata->model == CAN_MCP251X_MCP2510) {
+		int i;
+
+		for (i = 1; i < TXBDAT_OFF + len; i++)
+			mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx) + i,
+					  buf[i]);
+	} else {
+		mutex_lock(&priv->spi_lock);
+		memcpy(priv->spi_tx_buf, buf, TXBDAT_OFF + len);
+		mcp251x_spi_trans(spi, TXBDAT_OFF + len);
+		mutex_unlock(&priv->spi_lock);
+	}
+}
+
+static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
+			  int tx_buf_idx)
+{
+	u32 sid, eid, exide, rtr;
+	u8 buf[SPI_TRANSFER_BUF_LEN];
+
+	exide = (frame->can_id & CAN_EFF_FLAG) ? 1 : 0; /* Extended ID Enable */
+	if (exide)
+		sid = (frame->can_id & CAN_EFF_MASK) >> 18;
+	else
+		sid = frame->can_id & CAN_SFF_MASK; /* Standard ID */
+	eid = frame->can_id & CAN_EFF_MASK; /* Extended ID */
+	rtr = (frame->can_id & CAN_RTR_FLAG) ? 1 : 0; /* Remote transmission */
+
+	buf[TXBCTRL_OFF] = INSTRUCTION_LOAD_TXB(tx_buf_idx);
+	buf[TXBSIDH_OFF] = sid >> SIDH_SHIFT;
+	buf[TXBSIDL_OFF] = ((sid & SIDL_SID_MASK) << SIDL_SID_SHIFT) |
+		(exide << SIDL_EXIDE_SHIFT) |
+		((eid >> SIDL_EID_SHIFT) & SIDL_EID_MASK);
+	buf[TXBEID8_OFF] = GET_BYTE(eid, 1);
+	buf[TXBEID0_OFF] = GET_BYTE(eid, 0);
+	buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
+	memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
+	mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
+	mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+}
+
+static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
+				int buf_idx)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+
+	if (pdata->model == CAN_MCP251X_MCP2510) {
+		int i, len;
+
+		for (i = 1; i < RXBDAT_OFF; i++)
+			buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
+		len = buf[RXBDLC_OFF] & RXBDLC_LEN_MASK;
+		if (len > 8)
+			len = 8;
+		for (; i < (RXBDAT_OFF + len); i++)
+			buf[i] = mcp251x_read_reg(spi, RXBCTRL(buf_idx) + i);
+	} else {
+		mutex_lock(&priv->spi_lock);
+
+		priv->spi_tx_buf[RXBCTRL_OFF] = INSTRUCTION_READ_RXB(buf_idx);
+		mcp251x_spi_trans(spi, SPI_TRANSFER_BUF_LEN);
+		memcpy(buf, priv->spi_rx_buf, SPI_TRANSFER_BUF_LEN);
+
+		mutex_unlock(&priv->spi_lock);
+	}
+}
+
+static void mcp251x_hw_rx(struct spi_device *spi, int buf_idx)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	struct sk_buff *skb;
+	struct can_frame *frame;
+	u8 buf[SPI_TRANSFER_BUF_LEN];
+
+	skb = alloc_can_skb(priv->net, &frame);
+	if (!skb) {
+		dev_err(&spi->dev, "cannot allocate RX skb\n");
+		priv->net->stats.rx_dropped++;
+		return;
+	}
+
+	mcp251x_hw_rx_frame(spi, buf, buf_idx);
+	if (buf[RXBSIDL_OFF] & RXBSIDL_IDE) {
+		/* Extended ID format */
+		frame->can_id = CAN_EFF_FLAG;
+		frame->can_id |=
+			/* Extended ID part */
+			SET_BYTE(buf[RXBSIDL_OFF] & RXBSIDL_EID, 2) |
+			SET_BYTE(buf[RXBEID8_OFF], 1) |
+			SET_BYTE(buf[RXBEID0_OFF], 0) |
+			/* Standard ID part */
+			(((buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) |
+			  (buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT)) << 18);
+		/* Remote transmission request */
+		if (buf[RXBDLC_OFF] & RXBDLC_RTR)
+			frame->can_id |= CAN_RTR_FLAG;
+	} else {
+		/* Standard ID format */
+		frame->can_id =
+			(buf[RXBSIDH_OFF] << RXBSIDH_SHIFT) |
+			(buf[RXBSIDL_OFF] >> RXBSIDL_SHIFT);
+	}
+	/* Data length */
+	frame->can_dlc = buf[RXBDLC_OFF] & RXBDLC_LEN_MASK;
+	if (frame->can_dlc > 8) {
+		dev_warn(&spi->dev, "invalid frame recevied\n");
+		priv->net->stats.rx_errors++;
+		dev_kfree_skb(skb);
+		return;
+	}
+	memcpy(frame->data, buf + RXBDAT_OFF, frame->can_dlc);
+
+	priv->net->stats.rx_packets++;
+	priv->net->stats.rx_bytes += frame->can_dlc;
+	netif_rx(skb);
+}
+
+static void mcp251x_hw_sleep(struct spi_device *spi)
+{
+	mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_SLEEP);
+}
+
+static void mcp251x_hw_wakeup(struct spi_device *spi)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+	priv->wake = 1;
+
+	/* Can only wake up by generating a wake-up interrupt. */
+	mcp251x_write_bits(spi, CANINTE, CANINTE_WAKIE, CANINTE_WAKIE);
+	mcp251x_write_bits(spi, CANINTF, CANINTF_WAKIF, CANINTF_WAKIF);
+
+	/* Wait until the device is awake */
+	if (!wait_for_completion_timeout(&priv->awake, HZ))
+		dev_err(&spi->dev, "MCP251x didn't wake-up\n");
+}
+
+static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
+					   struct net_device *net)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+	struct spi_device *spi = priv->spi;
+
+	if (priv->tx_skb || priv->tx_len) {
+		dev_warn(&spi->dev, "hard_xmit called while tx busy\n");
+		netif_stop_queue(net);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (skb->len != sizeof(struct can_frame)) {
+		dev_err(&spi->dev, "dropping packet - bad length\n");
+		dev_kfree_skb(skb);
+		net->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
+
+	netif_stop_queue(net);
+	priv->tx_skb = skb;
+	net->trans_start = jiffies;
+	queue_work(priv->wq, &priv->tx_work);
+
+	return NETDEV_TX_OK;
+}
+
+static int mcp251x_do_set_mode(struct net_device *net, enum can_mode mode)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+
+	switch (mode) {
+	case CAN_MODE_START:
+		/* We have to delay work since SPI I/O may sleep */
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		priv->restart_tx = 1;
+		if (priv->can.restart_ms == 0)
+			priv->after_suspend = AFTER_SUSPEND_RESTART;
+		queue_work(priv->wq, &priv->irq_work);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static void mcp251x_set_normal_mode(struct spi_device *spi)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	unsigned long timeout;
+
+	/* Enable interrupts */
+	mcp251x_write_reg(spi, CANINTE,
+			  CANINTE_ERRIE | CANINTE_TX2IE | CANINTE_TX1IE |
+			  CANINTE_TX0IE | CANINTE_RX1IE | CANINTE_RX0IE |
+			  CANINTF_MERRF);
+
+	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) {
+		/* Put device into loopback mode */
+		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_LOOPBACK);
+	} else {
+		/* Put device into normal mode */
+		mcp251x_write_reg(spi, CANCTRL, CANCTRL_REQOP_NORMAL);
+
+		/* Wait for the device to enter normal mode */
+		timeout = jiffies + HZ;
+		while (mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) {
+			schedule();
+			if (time_after(jiffies, timeout)) {
+				dev_err(&spi->dev, "MCP251x didn't"
+					" enter in normal mode\n");
+				return;
+			}
+		}
+	}
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+static int mcp251x_do_set_bittiming(struct net_device *net)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+	struct can_bittiming *bt = &priv->can.bittiming;
+	struct spi_device *spi = priv->spi;
+
+	mcp251x_write_reg(spi, CNF1, ((bt->sjw - 1) << CNF1_SJW_SHIFT) |
+			  (bt->brp - 1));
+	mcp251x_write_reg(spi, CNF2, CNF2_BTLMODE |
+			  (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES ?
+			   CNF2_SAM : 0) |
+			  ((bt->phase_seg1 - 1) << CNF2_PS1_SHIFT) |
+			  (bt->prop_seg - 1));
+	mcp251x_write_bits(spi, CNF3, CNF3_PHSEG2_MASK,
+			   (bt->phase_seg2 - 1));
+	dev_info(&spi->dev, "CNF: 0x%02x 0x%02x 0x%02x\n",
+		 mcp251x_read_reg(spi, CNF1),
+		 mcp251x_read_reg(spi, CNF2),
+		 mcp251x_read_reg(spi, CNF3));
+
+	return 0;
+}
+
+static int mcp251x_setup(struct net_device *net, struct mcp251x_priv *priv,
+			 struct spi_device *spi)
+{
+	mcp251x_do_set_bittiming(net);
+
+	/* Enable RX0->RX1 buffer roll over and disable filters */
+	mcp251x_write_bits(spi, RXBCTRL(0),
+			   RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1,
+			   RXBCTRL_BUKT | RXBCTRL_RXM0 | RXBCTRL_RXM1);
+	mcp251x_write_bits(spi, RXBCTRL(1),
+			   RXBCTRL_RXM0 | RXBCTRL_RXM1,
+			   RXBCTRL_RXM0 | RXBCTRL_RXM1);
+	return 0;
+}
+
+static void mcp251x_hw_reset(struct spi_device *spi)
+{
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	int ret;
+
+	mutex_lock(&priv->spi_lock);
+
+	priv->spi_tx_buf[0] = INSTRUCTION_RESET;
+
+	ret = spi_write(spi, priv->spi_tx_buf, 1);
+
+	mutex_unlock(&priv->spi_lock);
+
+	if (ret)
+		dev_err(&spi->dev, "reset failed: ret = %d\n", ret);
+	/* Wait for reset to finish */
+	mdelay(10);
+}
+
+static int mcp251x_hw_probe(struct spi_device *spi)
+{
+	int st1, st2;
+
+	mcp251x_hw_reset(spi);
+
+	/*
+	 * Please note that these are "magic values" based on after
+	 * reset defaults taken from data sheet which allows us to see
+	 * if we really have a chip on the bus (we avoid common all
+	 * zeroes or all ones situations)
+	 */
+	st1 = mcp251x_read_reg(spi, CANSTAT) & 0xEE;
+	st2 = mcp251x_read_reg(spi, CANCTRL) & 0x17;
+
+	dev_dbg(&spi->dev, "CANSTAT 0x%02x CANCTRL 0x%02x\n", st1, st2);
+
+	/* Check for power up default values */
+	return (st1 == 0x80 && st2 == 0x07) ? 1 : 0;
+}
+
+static irqreturn_t mcp251x_can_isr(int irq, void *dev_id)
+{
+	struct net_device *net = (struct net_device *)dev_id;
+	struct mcp251x_priv *priv = netdev_priv(net);
+
+	/* Schedule bottom half */
+	if (!work_pending(&priv->irq_work))
+		queue_work(priv->wq, &priv->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static int mcp251x_open(struct net_device *net)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+	struct spi_device *spi = priv->spi;
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	int ret;
+
+	ret = open_candev(net);
+	if (ret) {
+		dev_err(&spi->dev, "unable to set initial baudrate!\n");
+		return ret;
+	}
+
+	if (pdata->transceiver_enable)
+		pdata->transceiver_enable(1);
+
+	priv->force_quit = 0;
+	priv->tx_skb = NULL;
+	priv->tx_len = 0;
+
+	ret = request_irq(spi->irq, mcp251x_can_isr,
+			  IRQF_TRIGGER_FALLING, DEVICE_NAME, net);
+	if (ret) {
+		dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
+		if (pdata->transceiver_enable)
+			pdata->transceiver_enable(0);
+		close_candev(net);
+		return ret;
+	}
+
+	mcp251x_hw_wakeup(spi);
+	mcp251x_hw_reset(spi);
+	ret = mcp251x_setup(net, priv, spi);
+	if (ret) {
+		free_irq(spi->irq, net);
+		mcp251x_hw_sleep(spi);
+		if (pdata->transceiver_enable)
+			pdata->transceiver_enable(0);
+		close_candev(net);
+		return ret;
+	}
+	mcp251x_set_normal_mode(spi);
+	netif_wake_queue(net);
+
+	return 0;
+}
+
+static int mcp251x_stop(struct net_device *net)
+{
+	struct mcp251x_priv *priv = netdev_priv(net);
+	struct spi_device *spi = priv->spi;
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+
+	close_candev(net);
+
+	/* Disable and clear pending interrupts */
+	mcp251x_write_reg(spi, CANINTE, 0x00);
+	mcp251x_write_reg(spi, CANINTF, 0x00);
+
+	priv->force_quit = 1;
+	free_irq(spi->irq, net);
+	flush_workqueue(priv->wq);
+
+	mcp251x_write_reg(spi, TXBCTRL(0), 0);
+	if (priv->tx_skb || priv->tx_len)
+		mcp251x_clean(net);
+
+	mcp251x_hw_sleep(spi);
+
+	if (pdata->transceiver_enable)
+		pdata->transceiver_enable(0);
+
+	priv->can.state = CAN_STATE_STOPPED;
+
+	return 0;
+}
+
+static void mcp251x_tx_work_handler(struct work_struct *ws)
+{
+	struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
+						 tx_work);
+	struct spi_device *spi = priv->spi;
+	struct net_device *net = priv->net;
+	struct can_frame *frame;
+
+	if (priv->tx_skb) {
+		frame = (struct can_frame *)priv->tx_skb->data;
+
+		if (priv->can.state == CAN_STATE_BUS_OFF) {
+			mcp251x_clean(net);
+			netif_wake_queue(net);
+			return;
+		}
+		if (frame->can_dlc > CAN_FRAME_MAX_DATA_LEN)
+			frame->can_dlc = CAN_FRAME_MAX_DATA_LEN;
+		mcp251x_hw_tx(spi, frame, 0);
+		priv->tx_len = 1 + frame->can_dlc;
+		can_put_echo_skb(priv->tx_skb, net, 0);
+		priv->tx_skb = NULL;
+	}
+}
+
+static void mcp251x_irq_work_handler(struct work_struct *ws)
+{
+	struct mcp251x_priv *priv = container_of(ws, struct mcp251x_priv,
+						 irq_work);
+	struct spi_device *spi = priv->spi;
+	struct net_device *net = priv->net;
+	u8 txbnctrl;
+	u8 intf;
+	enum can_state new_state;
+
+	if (priv->after_suspend) {
+		mdelay(10);
+		mcp251x_hw_reset(spi);
+		mcp251x_setup(net, priv, spi);
+		if (priv->after_suspend & AFTER_SUSPEND_RESTART) {
+			mcp251x_set_normal_mode(spi);
+		} else if (priv->after_suspend & AFTER_SUSPEND_UP) {
+			netif_device_attach(net);
+			/* Clean since we lost tx buffer */
+			if (priv->tx_skb || priv->tx_len) {
+				mcp251x_clean(net);
+				netif_wake_queue(net);
+			}
+			mcp251x_set_normal_mode(spi);
+		} else {
+			mcp251x_hw_sleep(spi);
+		}
+		priv->after_suspend = 0;
+	}
+
+	if (priv->can.restart_ms == 0 && priv->can.state == CAN_STATE_BUS_OFF)
+		return;
+
+	while (!priv->force_quit && !freezing(current)) {
+		u8 eflag = mcp251x_read_reg(spi, EFLG);
+		int can_id = 0, data1 = 0;
+
+		mcp251x_write_reg(spi, EFLG, 0x00);
+
+		if (priv->restart_tx) {
+			priv->restart_tx = 0;
+			mcp251x_write_reg(spi, TXBCTRL(0), 0);
+			if (priv->tx_skb || priv->tx_len)
+				mcp251x_clean(net);
+			netif_wake_queue(net);
+			can_id |= CAN_ERR_RESTARTED;
+		}
+
+		if (priv->wake) {
+			/* Wait whilst the device wakes up */
+			mdelay(10);
+			priv->wake = 0;
+		}
+
+		intf = mcp251x_read_reg(spi, CANINTF);
+		mcp251x_write_bits(spi, CANINTF, intf, 0x00);
+
+		/* Update can state */
+		if (eflag & EFLG_TXBO) {
+			new_state = CAN_STATE_BUS_OFF;
+			can_id |= CAN_ERR_BUSOFF;
+		} else if (eflag & EFLG_TXEP) {
+			new_state = CAN_STATE_ERROR_PASSIVE;
+			can_id |= CAN_ERR_CRTL;
+			data1 |= CAN_ERR_CRTL_TX_PASSIVE;
+		} else if (eflag & EFLG_RXEP) {
+			new_state = CAN_STATE_ERROR_PASSIVE;
+			can_id |= CAN_ERR_CRTL;
+			data1 |= CAN_ERR_CRTL_RX_PASSIVE;
+		} else if (eflag & EFLG_TXWAR) {
+			new_state = CAN_STATE_ERROR_WARNING;
+			can_id |= CAN_ERR_CRTL;
+			data1 |= CAN_ERR_CRTL_TX_WARNING;
+		} else if (eflag & EFLG_RXWAR) {
+			new_state = CAN_STATE_ERROR_WARNING;
+			can_id |= CAN_ERR_CRTL;
+			data1 |= CAN_ERR_CRTL_RX_WARNING;
+		} else {
+			new_state = CAN_STATE_ERROR_ACTIVE;
+		}
+
+		/* Update can state statistics */
+		switch (priv->can.state) {
+		case CAN_STATE_ERROR_ACTIVE:
+			if (new_state >= CAN_STATE_ERROR_WARNING &&
+			    new_state <= CAN_STATE_BUS_OFF)
+				priv->can.can_stats.error_warning++;
+		case CAN_STATE_ERROR_WARNING:	/* fallthrough */
+			if (new_state >= CAN_STATE_ERROR_PASSIVE &&
+			    new_state <= CAN_STATE_BUS_OFF)
+				priv->can.can_stats.error_passive++;
+			break;
+		default:
+			break;
+		}
+		priv->can.state = new_state;
+
+		if ((intf & CANINTF_ERRIF) || (can_id & CAN_ERR_RESTARTED)) {
+			struct sk_buff *skb;
+			struct can_frame *frame;
+
+			/* Create error frame */
+			skb = alloc_can_err_skb(net, &frame);
+			if (skb) {
+				/* Set error frame flags based on bus state */
+				frame->can_id = can_id;
+				frame->data[1] = data1;
+
+				/* Update net stats for overflows */
+				if (eflag & (EFLG_RX0OVR | EFLG_RX1OVR)) {
+					if (eflag & EFLG_RX0OVR)
+						net->stats.rx_over_errors++;
+					if (eflag & EFLG_RX1OVR)
+						net->stats.rx_over_errors++;
+					frame->can_id |= CAN_ERR_CRTL;
+					frame->data[1] |=
+						CAN_ERR_CRTL_RX_OVERFLOW;
+				}
+
+				netif_rx(skb);
+			} else {
+				dev_info(&spi->dev,
+					 "cannot allocate error skb\n");
+			}
+		}
+
+		if (priv->can.state == CAN_STATE_BUS_OFF) {
+			if (priv->can.restart_ms == 0) {
+				can_bus_off(net);
+				mcp251x_hw_sleep(spi);
+				return;
+			}
+		}
+
+		if (intf == 0)
+			break;
+
+		if (intf & CANINTF_WAKIF)
+			complete(&priv->awake);
+
+		if (intf & CANINTF_MERRF) {
+			/* If there are pending Tx buffers, restart queue */
+			txbnctrl = mcp251x_read_reg(spi, TXBCTRL(0));
+			if (!(txbnctrl & TXBCTRL_TXREQ)) {
+				if (priv->tx_skb || priv->tx_len)
+					mcp251x_clean(net);
+				netif_wake_queue(net);
+			}
+		}
+
+		if (intf & (CANINTF_TX2IF | CANINTF_TX1IF | CANINTF_TX0IF)) {
+			net->stats.tx_packets++;
+			net->stats.tx_bytes += priv->tx_len - 1;
+			if (priv->tx_len) {
+				can_get_echo_skb(net, 0);
+				priv->tx_len = 0;
+			}
+			netif_wake_queue(net);
+		}
+
+		if (intf & CANINTF_RX0IF)
+			mcp251x_hw_rx(spi, 0);
+
+		if (intf & CANINTF_RX1IF)
+			mcp251x_hw_rx(spi, 1);
+	}
+}
+
+static const struct net_device_ops mcp251x_netdev_ops = {
+	.ndo_open = mcp251x_open,
+	.ndo_stop = mcp251x_stop,
+	.ndo_start_xmit = mcp251x_hard_start_xmit,
+};
+
+static int __devinit mcp251x_can_probe(struct spi_device *spi)
+{
+	struct net_device *net;
+	struct mcp251x_priv *priv;
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	int ret = -ENODEV;
+
+	if (!pdata)
+		/* Platform data is required for osc freq */
+		goto error_out;
+
+	/* Allocate can/net device */
+	net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
+	if (!net) {
+		ret = -ENOMEM;
+		goto error_alloc;
+	}
+
+	net->netdev_ops = &mcp251x_netdev_ops;
+	net->flags |= IFF_ECHO;
+
+	priv = netdev_priv(net);
+	priv->can.bittiming_const = &mcp251x_bittiming_const;
+	priv->can.do_set_mode = mcp251x_do_set_mode;
+	priv->can.clock.freq = pdata->oscillator_frequency / 2;
+	priv->net = net;
+	dev_set_drvdata(&spi->dev, priv);
+
+	priv->spi = spi;
+	mutex_init(&priv->spi_lock);
+
+	/* If requested, allocate DMA buffers */
+	if (mcp251x_enable_dma) {
+		spi->dev.coherent_dma_mask = ~0;
+
+		/*
+		 * Minimum coherent DMA allocation is PAGE_SIZE, so allocate
+		 * that much and share it between Tx and Rx DMA buffers.
+		 */
+		priv->spi_tx_buf = dma_alloc_coherent(&spi->dev,
+						      PAGE_SIZE,
+						      &priv->spi_tx_dma,
+						      GFP_DMA);
+
+		if (priv->spi_tx_buf) {
+			priv->spi_rx_buf = (u8 *)(priv->spi_tx_buf +
+						  (PAGE_SIZE / 2));
+			priv->spi_rx_dma = (dma_addr_t)(priv->spi_tx_dma +
+							(PAGE_SIZE / 2));
+		} else {
+			/* Fall back to non-DMA */
+			mcp251x_enable_dma = 0;
+		}
+	}
+
+	/* Allocate non-DMA buffers */
+	if (!mcp251x_enable_dma) {
+		priv->spi_tx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+		if (!priv->spi_tx_buf) {
+			ret = -ENOMEM;
+			goto error_tx_buf;
+		}
+		priv->spi_rx_buf = kmalloc(SPI_TRANSFER_BUF_LEN, GFP_KERNEL);
+		if (!priv->spi_tx_buf) {
+			ret = -ENOMEM;
+			goto error_rx_buf;
+		}
+	}
+
+	if (pdata->power_enable)
+		pdata->power_enable(1);
+
+	/* Call out to platform specific setup */
+	if (pdata->board_specific_setup)
+		pdata->board_specific_setup(spi);
+
+	SET_NETDEV_DEV(net, &spi->dev);
+
+	priv->wq = create_freezeable_workqueue("mcp251x_wq");
+
+	INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler);
+	INIT_WORK(&priv->irq_work, mcp251x_irq_work_handler);
+
+	init_completion(&priv->awake);
+
+	/* Configure the SPI bus */
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	spi_setup(spi);
+
+	if (!mcp251x_hw_probe(spi)) {
+		dev_info(&spi->dev, "Probe failed\n");
+		goto error_probe;
+	}
+	mcp251x_hw_sleep(spi);
+
+	if (pdata->transceiver_enable)
+		pdata->transceiver_enable(0);
+
+	ret = register_candev(net);
+	if (!ret) {
+		dev_info(&spi->dev, "probed\n");
+		return ret;
+	}
+error_probe:
+	if (!mcp251x_enable_dma)
+		kfree(priv->spi_rx_buf);
+error_rx_buf:
+	if (!mcp251x_enable_dma)
+		kfree(priv->spi_tx_buf);
+error_tx_buf:
+	free_candev(net);
+	if (mcp251x_enable_dma)
+		dma_free_coherent(&spi->dev, PAGE_SIZE,
+				  priv->spi_tx_buf, priv->spi_tx_dma);
+error_alloc:
+	if (pdata->power_enable)
+		pdata->power_enable(0);
+	dev_err(&spi->dev, "probe failed\n");
+error_out:
+	return ret;
+}
+
+static int __devexit mcp251x_can_remove(struct spi_device *spi)
+{
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	struct net_device *net = priv->net;
+
+	unregister_candev(net);
+	free_candev(net);
+
+	priv->force_quit = 1;
+	flush_workqueue(priv->wq);
+	destroy_workqueue(priv->wq);
+
+	if (mcp251x_enable_dma) {
+		dma_free_coherent(&spi->dev, PAGE_SIZE,
+				  priv->spi_tx_buf, priv->spi_tx_dma);
+	} else {
+		kfree(priv->spi_tx_buf);
+		kfree(priv->spi_rx_buf);
+	}
+
+	if (pdata->power_enable)
+		pdata->power_enable(0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcp251x_can_suspend(struct spi_device *spi, pm_message_t state)
+{
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+	struct net_device *net = priv->net;
+
+	if (netif_running(net)) {
+		netif_device_detach(net);
+
+		mcp251x_hw_sleep(spi);
+		if (pdata->transceiver_enable)
+			pdata->transceiver_enable(0);
+		priv->after_suspend = AFTER_SUSPEND_UP;
+	} else {
+		priv->after_suspend = AFTER_SUSPEND_DOWN;
+	}
+
+	if (pdata->power_enable) {
+		pdata->power_enable(0);
+		priv->after_suspend |= AFTER_SUSPEND_POWER;
+	}
+
+	return 0;
+}
+
+static int mcp251x_can_resume(struct spi_device *spi)
+{
+	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
+
+	if (priv->after_suspend & AFTER_SUSPEND_POWER) {
+		pdata->power_enable(1);
+		queue_work(priv->wq, &priv->irq_work);
+	} else {
+		if (priv->after_suspend & AFTER_SUSPEND_UP) {
+			if (pdata->transceiver_enable)
+				pdata->transceiver_enable(1);
+			queue_work(priv->wq, &priv->irq_work);
+		} else {
+			priv->after_suspend = 0;
+		}
+	}
+	return 0;
+}
+#else
+#define mcp251x_can_suspend NULL
+#define mcp251x_can_resume NULL
+#endif
+
+static struct spi_driver mcp251x_can_driver = {
+	.driver = {
+		.name = DEVICE_NAME,
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+	},
+
+	.probe = mcp251x_can_probe,
+	.remove = __devexit_p(mcp251x_can_remove),
+	.suspend = mcp251x_can_suspend,
+	.resume = mcp251x_can_resume,
+};
+
+static int __init mcp251x_can_init(void)
+{
+	return spi_register_driver(&mcp251x_can_driver);
+}
+
+static void __exit mcp251x_can_exit(void)
+{
+	spi_unregister_driver(&mcp251x_can_driver);
+}
+
+module_init(mcp251x_can_init);
+module_exit(mcp251x_can_exit);
+
+MODULE_AUTHOR("Chris Elston <celston@katalix.com>, "
+	      "Christian Pellegrin <chripell@evolware.org>");
+MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/Kconfig b/drivers/net/can/mscan/Kconfig
new file mode 100644
index 0000000..cd0f2d6
--- /dev/null
+++ b/drivers/net/can/mscan/Kconfig
@@ -0,0 +1,23 @@
+config CAN_MSCAN
+	depends on CAN_DEV && (PPC || M68K || M68KNOMMU)
+	tristate "Support for Freescale MSCAN based chips"
+	---help---
+	  The Motorola Scalable Controller Area Network (MSCAN) definition
+	  is based on the MSCAN12 definition which is the specific
+	  implementation of the Motorola Scalable CAN concept targeted for
+	  the Motorola MC68HC12 Microcontroller Family.
+
+if CAN_MSCAN
+
+config CAN_MPC5XXX
+	tristate "Freescale MPC5xxx onboard CAN controller"
+	depends on PPC_MPC52xx
+	---help---
+	  If you say yes here you get support for Freescale's MPC5xxx
+	  onboard CAN controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called mscan-mpc5xxx.ko.
+
+endif
+
diff --git a/drivers/net/can/mscan/Makefile b/drivers/net/can/mscan/Makefile
new file mode 100644
index 0000000..c9fab17
--- /dev/null
+++ b/drivers/net/can/mscan/Makefile
@@ -0,0 +1,5 @@
+
+obj-$(CONFIG_CAN_MPC5XXX)	+= mscan-mpc5xxx.o
+mscan-mpc5xxx-objs		:= mscan.o mpc5xxx_can.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
new file mode 100644
index 0000000..1de6f63
--- /dev/null
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -0,0 +1,259 @@
+/*
+ * CAN bus driver for the Freescale MPC5xxx embedded CPU.
+ *
+ * Copyright (C) 2004-2005 Andrey Volkov <avolkov@varma-el.com>,
+ *                         Varma Electronics Oy
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ * Copyright (C) 2009 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/netdevice.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <linux/io.h>
+#include <asm/mpc52xx.h>
+
+#include "mscan.h"
+
+#define DRV_NAME "mpc5xxx_can"
+
+static struct of_device_id mpc52xx_cdm_ids[] __devinitdata = {
+	{ .compatible = "fsl,mpc5200-cdm", },
+	{}
+};
+
+/*
+ * Get frequency of the MSCAN clock source
+ *
+ * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock (IP_CLK)
+ * can be selected. According to the MPC5200 user's manual, the oscillator
+ * clock is the better choice as it has less jitter but due to a hardware
+ * bug, it can not be selected for the old MPC5200 Rev. A chips.
+ */
+
+static unsigned int  __devinit mpc52xx_can_clock_freq(struct of_device *of,
+						      int clock_src)
+{
+	unsigned int pvr;
+	struct mpc52xx_cdm  __iomem *cdm;
+	struct device_node *np_cdm;
+	unsigned int freq;
+	u32 val;
+
+	pvr = mfspr(SPRN_PVR);
+
+	freq = mpc5xxx_get_bus_frequency(of->node);
+	if (!freq)
+		return 0;
+
+	if (clock_src == MSCAN_CLKSRC_BUS || pvr == 0x80822011)
+		return freq;
+
+	/* Determine SYS_XTAL_IN frequency from the clock domain settings */
+	np_cdm = of_find_matching_node(NULL, mpc52xx_cdm_ids);
+	if (!np_cdm) {
+		dev_err(&of->dev, "can't get clock node!\n");
+		return 0;
+	}
+	cdm = of_iomap(np_cdm, 0);
+	of_node_put(np_cdm);
+
+	if (in_8(&cdm->ipb_clk_sel) & 0x1)
+		freq *= 2;
+	val = in_be32(&cdm->rstcfg);
+
+	freq *= (val & (1 << 5)) ? 8 : 4;
+	freq /= (val & (1 << 6)) ? 12 : 16;
+
+	iounmap(cdm);
+
+	return freq;
+}
+
+static int __devinit mpc5xxx_can_probe(struct of_device *ofdev,
+				       const struct of_device_id *id)
+{
+	struct device_node *np = ofdev->node;
+	struct net_device *dev;
+	struct mscan_priv *priv;
+	void __iomem *base;
+	const char *clk_src;
+	int err, irq, clock_src;
+
+	base = of_iomap(ofdev->node, 0);
+	if (!base) {
+		dev_err(&ofdev->dev, "couldn't ioremap\n");
+		err = -ENOMEM;
+		goto exit_release_mem;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		dev_err(&ofdev->dev, "no irq found\n");
+		err = -ENODEV;
+		goto exit_unmap_mem;
+	}
+
+	dev = alloc_mscandev();
+	if (!dev) {
+		err = -ENOMEM;
+		goto exit_dispose_irq;
+	}
+
+	priv = netdev_priv(dev);
+	priv->reg_base = base;
+	dev->irq = irq;
+
+	/*
+	 * Either the oscillator clock (SYS_XTAL_IN) or the IP bus clock
+	 * (IP_CLK) can be selected as MSCAN clock source. According to
+	 * the MPC5200 user's manual, the oscillator clock is the better
+	 * choice as it has less jitter. For this reason, it is selected
+	 * by default.
+	 */
+	clk_src = of_get_property(np, "fsl,mscan-clock-source", NULL);
+	if (clk_src && strcmp(clk_src, "ip") == 0)
+		clock_src = MSCAN_CLKSRC_BUS;
+	else
+		clock_src = MSCAN_CLKSRC_XTAL;
+	priv->can.clock.freq = mpc52xx_can_clock_freq(ofdev, clock_src);
+	if (!priv->can.clock.freq) {
+		dev_err(&ofdev->dev, "couldn't get MSCAN clock frequency\n");
+		err = -ENODEV;
+		goto exit_free_mscan;
+	}
+
+	SET_NETDEV_DEV(dev, &ofdev->dev);
+
+	err = register_mscandev(dev, clock_src);
+	if (err) {
+		dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
+			DRV_NAME, err);
+		goto exit_free_mscan;
+	}
+
+	dev_set_drvdata(&ofdev->dev, dev);
+
+	dev_info(&ofdev->dev, "MSCAN at 0x%p, irq %d, clock %d Hz\n",
+		 priv->reg_base, dev->irq, priv->can.clock.freq);
+
+	return 0;
+
+exit_free_mscan:
+	free_candev(dev);
+exit_dispose_irq:
+	irq_dispose_mapping(irq);
+exit_unmap_mem:
+	iounmap(base);
+exit_release_mem:
+	return err;
+}
+
+static int __devexit mpc5xxx_can_remove(struct of_device *ofdev)
+{
+	struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+	struct mscan_priv *priv = netdev_priv(dev);
+
+	dev_set_drvdata(&ofdev->dev, NULL);
+
+	unregister_mscandev(dev);
+	iounmap(priv->reg_base);
+	irq_dispose_mapping(dev->irq);
+	free_candev(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct mscan_regs saved_regs;
+static int mpc5xxx_can_suspend(struct of_device *ofdev, pm_message_t state)
+{
+	struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+	_memcpy_fromio(&saved_regs, regs, sizeof(*regs));
+
+	return 0;
+}
+
+static int mpc5xxx_can_resume(struct of_device *ofdev)
+{
+	struct net_device *dev = dev_get_drvdata(&ofdev->dev);
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+	regs->canctl0 |= MSCAN_INITRQ;
+	while (!(regs->canctl1 & MSCAN_INITAK))
+		udelay(10);
+
+	regs->canctl1 = saved_regs.canctl1;
+	regs->canbtr0 = saved_regs.canbtr0;
+	regs->canbtr1 = saved_regs.canbtr1;
+	regs->canidac = saved_regs.canidac;
+
+	/* restore masks, buffers etc. */
+	_memcpy_toio(&regs->canidar1_0, (void *)&saved_regs.canidar1_0,
+		     sizeof(*regs) - offsetof(struct mscan_regs, canidar1_0));
+
+	regs->canctl0 &= ~MSCAN_INITRQ;
+	regs->cantbsel = saved_regs.cantbsel;
+	regs->canrier = saved_regs.canrier;
+	regs->cantier = saved_regs.cantier;
+	regs->canctl0 = saved_regs.canctl0;
+
+	return 0;
+}
+#endif
+
+static struct of_device_id __devinitdata mpc5xxx_can_table[] = {
+	{.compatible = "fsl,mpc5200-mscan"},
+	{},
+};
+
+static struct of_platform_driver mpc5xxx_can_driver = {
+	.owner = THIS_MODULE,
+	.name = "mpc5xxx_can",
+	.probe = mpc5xxx_can_probe,
+	.remove = __devexit_p(mpc5xxx_can_remove),
+#ifdef CONFIG_PM
+	.suspend = mpc5xxx_can_suspend,
+	.resume = mpc5xxx_can_resume,
+#endif
+	.match_table = mpc5xxx_can_table,
+};
+
+static int __init mpc5xxx_can_init(void)
+{
+	return of_register_platform_driver(&mpc5xxx_can_driver);
+}
+module_init(mpc5xxx_can_init);
+
+static void __exit mpc5xxx_can_exit(void)
+{
+	return of_unregister_platform_driver(&mpc5xxx_can_driver);
+};
+module_exit(mpc5xxx_can_exit);
+
+MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
+MODULE_DESCRIPTION("Freescale MPC5200 CAN driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
new file mode 100644
index 0000000..bb06dfb
--- /dev/null
+++ b/drivers/net/can/mscan/mscan.c
@@ -0,0 +1,668 @@
+/*
+ * CAN bus driver for the alone generic (as possible as) MSCAN controller.
+ *
+ * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>,
+ *                         Varma Electronics Oy
+ * Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
+ * Copytight (C) 2008-2009 Pengutronix <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/list.h>
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/io.h>
+
+#include "mscan.h"
+
+static struct can_bittiming_const mscan_bittiming_const = {
+	.name = "mscan",
+	.tseg1_min = 4,
+	.tseg1_max = 16,
+	.tseg2_min = 2,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 64,
+	.brp_inc = 1,
+};
+
+struct mscan_state {
+	u8 mode;
+	u8 canrier;
+	u8 cantier;
+};
+
+static enum can_state state_map[] = {
+	CAN_STATE_ERROR_ACTIVE,
+	CAN_STATE_ERROR_WARNING,
+	CAN_STATE_ERROR_PASSIVE,
+	CAN_STATE_BUS_OFF
+};
+
+static int mscan_set_mode(struct net_device *dev, u8 mode)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	int ret = 0;
+	int i;
+	u8 canctl1;
+
+	if (mode != MSCAN_NORMAL_MODE) {
+		if (priv->tx_active) {
+			/* Abort transfers before going to sleep */#
+			out_8(&regs->cantarq, priv->tx_active);
+			/* Suppress TX done interrupts */
+			out_8(&regs->cantier, 0);
+		}
+
+		canctl1 = in_8(&regs->canctl1);
+		if ((mode & MSCAN_SLPRQ) && !(canctl1 & MSCAN_SLPAK)) {
+			setbits8(&regs->canctl0, MSCAN_SLPRQ);
+			for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) {
+				if (in_8(&regs->canctl1) & MSCAN_SLPAK)
+					break;
+				udelay(100);
+			}
+			/*
+			 * The mscan controller will fail to enter sleep mode,
+			 * while there are irregular activities on bus, like
+			 * somebody keeps retransmitting. This behavior is
+			 * undocumented and seems to differ between mscan built
+			 * in mpc5200b and mpc5200. We proceed in that case,
+			 * since otherwise the slprq will be kept set and the
+			 * controller will get stuck. NOTE: INITRQ or CSWAI
+			 * will abort all active transmit actions, if still
+			 * any, at once.
+			 */
+			if (i >= MSCAN_SET_MODE_RETRIES)
+				dev_dbg(dev->dev.parent,
+					"device failed to enter sleep mode. "
+					"We proceed anyhow.\n");
+			else
+				priv->can.state = CAN_STATE_SLEEPING;
+		}
+
+		if ((mode & MSCAN_INITRQ) && !(canctl1 & MSCAN_INITAK)) {
+			setbits8(&regs->canctl0, MSCAN_INITRQ);
+			for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) {
+				if (in_8(&regs->canctl1) & MSCAN_INITAK)
+					break;
+			}
+			if (i >= MSCAN_SET_MODE_RETRIES)
+				ret = -ENODEV;
+		}
+		if (!ret)
+			priv->can.state = CAN_STATE_STOPPED;
+
+		if (mode & MSCAN_CSWAI)
+			setbits8(&regs->canctl0, MSCAN_CSWAI);
+
+	} else {
+		canctl1 = in_8(&regs->canctl1);
+		if (canctl1 & (MSCAN_SLPAK | MSCAN_INITAK)) {
+			clrbits8(&regs->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ);
+			for (i = 0; i < MSCAN_SET_MODE_RETRIES; i++) {
+				canctl1 = in_8(&regs->canctl1);
+				if (!(canctl1 & (MSCAN_INITAK | MSCAN_SLPAK)))
+					break;
+			}
+			if (i >= MSCAN_SET_MODE_RETRIES)
+				ret = -ENODEV;
+			else
+				priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		}
+	}
+	return ret;
+}
+
+static int mscan_start(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	u8 canrflg;
+	int err;
+
+	out_8(&regs->canrier, 0);
+
+	INIT_LIST_HEAD(&priv->tx_head);
+	priv->prev_buf_id = 0;
+	priv->cur_pri = 0;
+	priv->tx_active = 0;
+	priv->shadow_canrier = 0;
+	priv->flags = 0;
+
+	err = mscan_set_mode(dev, MSCAN_NORMAL_MODE);
+	if (err)
+		return err;
+
+	canrflg = in_8(&regs->canrflg);
+	priv->shadow_statflg = canrflg & MSCAN_STAT_MSK;
+	priv->can.state = state_map[max(MSCAN_STATE_RX(canrflg),
+				    MSCAN_STATE_TX(canrflg))];
+	out_8(&regs->cantier, 0);
+
+	/* Enable receive interrupts. */
+	out_8(&regs->canrier, MSCAN_OVRIE | MSCAN_RXFIE | MSCAN_CSCIE |
+	      MSCAN_RSTATE1 | MSCAN_RSTATE0 | MSCAN_TSTATE1 | MSCAN_TSTATE0);
+
+	return 0;
+}
+
+static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct can_frame *frame = (struct can_frame *)skb->data;
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	int i, rtr, buf_id;
+	u32 can_id;
+
+	if (frame->can_dlc > 8)
+		return -EINVAL;
+
+	out_8(&regs->cantier, 0);
+
+	i = ~priv->tx_active & MSCAN_TXE;
+	buf_id = ffs(i) - 1;
+	switch (hweight8(i)) {
+	case 0:
+		netif_stop_queue(dev);
+		dev_err(dev->dev.parent, "Tx Ring full when queue awake!\n");
+		return NETDEV_TX_BUSY;
+	case 1:
+		/*
+		 * if buf_id < 3, then current frame will be send out of order,
+		 * since buffer with lower id have higher priority (hell..)
+		 */
+		netif_stop_queue(dev);
+	case 2:
+		if (buf_id < priv->prev_buf_id) {
+			priv->cur_pri++;
+			if (priv->cur_pri == 0xff) {
+				set_bit(F_TX_WAIT_ALL, &priv->flags);
+				netif_stop_queue(dev);
+			}
+		}
+		set_bit(F_TX_PROGRESS, &priv->flags);
+		break;
+	}
+	priv->prev_buf_id = buf_id;
+	out_8(&regs->cantbsel, i);
+
+	rtr = frame->can_id & CAN_RTR_FLAG;
+
+	/* RTR is always the lowest bit of interest, then IDs follow */
+	if (frame->can_id & CAN_EFF_FLAG) {
+		can_id = (frame->can_id & CAN_EFF_MASK)
+			 << (MSCAN_EFF_RTR_SHIFT + 1);
+		if (rtr)
+			can_id |= 1 << MSCAN_EFF_RTR_SHIFT;
+		out_be16(&regs->tx.idr3_2, can_id);
+
+		can_id >>= 16;
+		/* EFF_FLAGS are inbetween the IDs :( */
+		can_id = (can_id & 0x7) | ((can_id << 2) & 0xffe0)
+			 | MSCAN_EFF_FLAGS;
+	} else {
+		can_id = (frame->can_id & CAN_SFF_MASK)
+			 << (MSCAN_SFF_RTR_SHIFT + 1);
+		if (rtr)
+			can_id |= 1 << MSCAN_SFF_RTR_SHIFT;
+	}
+	out_be16(&regs->tx.idr1_0, can_id);
+
+	if (!rtr) {
+		void __iomem *data = &regs->tx.dsr1_0;
+		u16 *payload = (u16 *)frame->data;
+
+		/* It is safe to write into dsr[dlc+1] */
+		for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+			out_be16(data, *payload++);
+			data += 2 + _MSCAN_RESERVED_DSR_SIZE;
+		}
+	}
+
+	out_8(&regs->tx.dlr, frame->can_dlc);
+	out_8(&regs->tx.tbpr, priv->cur_pri);
+
+	/* Start transmission. */
+	out_8(&regs->cantflg, 1 << buf_id);
+
+	if (!test_bit(F_TX_PROGRESS, &priv->flags))
+		dev->trans_start = jiffies;
+
+	list_add_tail(&priv->tx_queue[buf_id].list, &priv->tx_head);
+
+	can_put_echo_skb(skb, dev, buf_id);
+
+	/* Enable interrupt. */
+	priv->tx_active |= 1 << buf_id;
+	out_8(&regs->cantier, priv->tx_active);
+
+	return NETDEV_TX_OK;
+}
+
+/* This function returns the old state to see where we came from */
+static enum can_state check_set_state(struct net_device *dev, u8 canrflg)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	enum can_state state, old_state = priv->can.state;
+
+	if (canrflg & MSCAN_CSCIF && old_state <= CAN_STATE_BUS_OFF) {
+		state = state_map[max(MSCAN_STATE_RX(canrflg),
+				      MSCAN_STATE_TX(canrflg))];
+		priv->can.state = state;
+	}
+	return old_state;
+}
+
+static void mscan_get_rx_frame(struct net_device *dev, struct can_frame *frame)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	u32 can_id;
+	int i;
+
+	can_id = in_be16(&regs->rx.idr1_0);
+	if (can_id & (1 << 3)) {
+		frame->can_id = CAN_EFF_FLAG;
+		can_id = ((can_id << 16) | in_be16(&regs->rx.idr3_2));
+		can_id = ((can_id & 0xffe00000) |
+			  ((can_id & 0x7ffff) << 2)) >> 2;
+	} else {
+		can_id >>= 4;
+		frame->can_id = 0;
+	}
+
+	frame->can_id |= can_id >> 1;
+	if (can_id & 1)
+		frame->can_id |= CAN_RTR_FLAG;
+	frame->can_dlc = in_8(&regs->rx.dlr) & 0xf;
+
+	if (!(frame->can_id & CAN_RTR_FLAG)) {
+		void __iomem *data = &regs->rx.dsr1_0;
+		u16 *payload = (u16 *)frame->data;
+
+		for (i = 0; i < (frame->can_dlc + 1) / 2; i++) {
+			*payload++ = in_be16(data);
+			data += 2 + _MSCAN_RESERVED_DSR_SIZE;
+		}
+	}
+
+	out_8(&regs->canrflg, MSCAN_RXF);
+}
+
+static void mscan_get_err_frame(struct net_device *dev, struct can_frame *frame,
+				u8 canrflg)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct net_device_stats *stats = &dev->stats;
+	enum can_state old_state;
+
+	dev_dbg(dev->dev.parent, "error interrupt (canrflg=%#x)\n", canrflg);
+	frame->can_id = CAN_ERR_FLAG;
+
+	if (canrflg & MSCAN_OVRIF) {
+		frame->can_id |= CAN_ERR_CRTL;
+		frame->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+	} else {
+		frame->data[1] = 0;
+	}
+
+	old_state = check_set_state(dev, canrflg);
+	/* State changed */
+	if (old_state != priv->can.state) {
+		switch (priv->can.state) {
+		case CAN_STATE_ERROR_WARNING:
+			frame->can_id |= CAN_ERR_CRTL;
+			priv->can.can_stats.error_warning++;
+			if ((priv->shadow_statflg & MSCAN_RSTAT_MSK) <
+			    (canrflg & MSCAN_RSTAT_MSK))
+				frame->data[1] |= CAN_ERR_CRTL_RX_WARNING;
+			if ((priv->shadow_statflg & MSCAN_TSTAT_MSK) <
+			    (canrflg & MSCAN_TSTAT_MSK))
+				frame->data[1] |= CAN_ERR_CRTL_TX_WARNING;
+			break;
+		case CAN_STATE_ERROR_PASSIVE:
+			frame->can_id |= CAN_ERR_CRTL;
+			priv->can.can_stats.error_passive++;
+			frame->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+			break;
+		case CAN_STATE_BUS_OFF:
+			frame->can_id |= CAN_ERR_BUSOFF;
+			/*
+			 * The MSCAN on the MPC5200 does recover from bus-off
+			 * automatically. To avoid that we stop the chip doing
+			 * a light-weight stop (we are in irq-context).
+			 */
+			out_8(&regs->cantier, 0);
+			out_8(&regs->canrier, 0);
+			setbits8(&regs->canctl0, MSCAN_SLPRQ | MSCAN_INITRQ);
+			can_bus_off(dev);
+			break;
+		default:
+			break;
+		}
+	}
+	priv->shadow_statflg = canrflg & MSCAN_STAT_MSK;
+	frame->can_dlc = CAN_ERR_DLC;
+	out_8(&regs->canrflg, MSCAN_ERR_IF);
+}
+
+static int mscan_rx_poll(struct napi_struct *napi, int quota)
+{
+	struct mscan_priv *priv = container_of(napi, struct mscan_priv, napi);
+	struct net_device *dev = napi->dev;
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct net_device_stats *stats = &dev->stats;
+	int npackets = 0;
+	int ret = 1;
+	struct sk_buff *skb;
+	struct can_frame *frame;
+	u8 canrflg;
+
+	while (npackets < quota) {
+		canrflg = in_8(&regs->canrflg);
+		if (!(canrflg & (MSCAN_RXF | MSCAN_ERR_IF)))
+			break;
+
+		skb = alloc_can_skb(dev, &frame);
+		if (!skb) {
+			if (printk_ratelimit())
+				dev_notice(dev->dev.parent, "packet dropped\n");
+			stats->rx_dropped++;
+			out_8(&regs->canrflg, canrflg);
+			continue;
+		}
+
+		if (canrflg & MSCAN_RXF)
+			mscan_get_rx_frame(dev, frame);
+		else if (canrflg & MSCAN_ERR_IF)
+			mscan_get_err_frame(dev, frame, canrflg);
+
+		stats->rx_packets++;
+		stats->rx_bytes += frame->can_dlc;
+		npackets++;
+		netif_receive_skb(skb);
+	}
+
+	if (!(in_8(&regs->canrflg) & (MSCAN_RXF | MSCAN_ERR_IF))) {
+		napi_complete(&priv->napi);
+		clear_bit(F_RX_PROGRESS, &priv->flags);
+		if (priv->can.state < CAN_STATE_BUS_OFF)
+			out_8(&regs->canrier, priv->shadow_canrier);
+		ret = 0;
+	}
+	return ret;
+}
+
+static irqreturn_t mscan_isr(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *)dev_id;
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct net_device_stats *stats = &dev->stats;
+	u8 cantier, cantflg, canrflg;
+	irqreturn_t ret = IRQ_NONE;
+
+	cantier = in_8(&regs->cantier) & MSCAN_TXE;
+	cantflg = in_8(&regs->cantflg) & cantier;
+
+	if (cantier && cantflg) {
+		struct list_head *tmp, *pos;
+
+		list_for_each_safe(pos, tmp, &priv->tx_head) {
+			struct tx_queue_entry *entry =
+			    list_entry(pos, struct tx_queue_entry, list);
+			u8 mask = entry->mask;
+
+			if (!(cantflg & mask))
+				continue;
+
+			out_8(&regs->cantbsel, mask);
+			stats->tx_bytes += in_8(&regs->tx.dlr);
+			stats->tx_packets++;
+			can_get_echo_skb(dev, entry->id);
+			priv->tx_active &= ~mask;
+			list_del(pos);
+		}
+
+		if (list_empty(&priv->tx_head)) {
+			clear_bit(F_TX_WAIT_ALL, &priv->flags);
+			clear_bit(F_TX_PROGRESS, &priv->flags);
+			priv->cur_pri = 0;
+		} else {
+			dev->trans_start = jiffies;
+		}
+
+		if (!test_bit(F_TX_WAIT_ALL, &priv->flags))
+			netif_wake_queue(dev);
+
+		out_8(&regs->cantier, priv->tx_active);
+		ret = IRQ_HANDLED;
+	}
+
+	canrflg = in_8(&regs->canrflg);
+	if ((canrflg & ~MSCAN_STAT_MSK) &&
+	    !test_and_set_bit(F_RX_PROGRESS, &priv->flags)) {
+		if (canrflg & ~MSCAN_STAT_MSK) {
+			priv->shadow_canrier = in_8(&regs->canrier);
+			out_8(&regs->canrier, 0);
+			napi_schedule(&priv->napi);
+			ret = IRQ_HANDLED;
+		} else {
+			clear_bit(F_RX_PROGRESS, &priv->flags);
+		}
+	}
+	return ret;
+}
+
+static int mscan_do_set_mode(struct net_device *dev, enum can_mode mode)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	int ret = 0;
+
+	if (!priv->open_time)
+		return -EINVAL;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		if (priv->can.state <= CAN_STATE_BUS_OFF)
+			mscan_set_mode(dev, MSCAN_INIT_MODE);
+		ret = mscan_start(dev);
+		if (ret)
+			break;
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+		break;
+
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+	return ret;
+}
+
+static int mscan_do_set_bittiming(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	struct can_bittiming *bt = &priv->can.bittiming;
+	u8 btr0, btr1;
+
+	btr0 = BTR0_SET_BRP(bt->brp) | BTR0_SET_SJW(bt->sjw);
+	btr1 = (BTR1_SET_TSEG1(bt->prop_seg + bt->phase_seg1) |
+		BTR1_SET_TSEG2(bt->phase_seg2) |
+		BTR1_SET_SAM(priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES));
+
+	dev_info(dev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n",
+		btr0, btr1);
+
+	out_8(&regs->canbtr0, btr0);
+	out_8(&regs->canbtr1, btr1);
+
+	return 0;
+}
+
+static int mscan_open(struct net_device *dev)
+{
+	int ret;
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+	/* common open */
+	ret = open_candev(dev);
+	if (ret)
+		return ret;
+
+	napi_enable(&priv->napi);
+
+	ret = request_irq(dev->irq, mscan_isr, 0, dev->name, dev);
+	if (ret < 0) {
+		dev_err(dev->dev.parent, "failed to attach interrupt\n");
+		goto exit_napi_disable;
+	}
+
+	priv->open_time = jiffies;
+
+	clrbits8(&regs->canctl1, MSCAN_LISTEN);
+
+	ret = mscan_start(dev);
+	if (ret)
+		goto exit_free_irq;
+
+	netif_start_queue(dev);
+
+	return 0;
+
+exit_free_irq:
+	priv->open_time = 0;
+	free_irq(dev->irq, dev);
+exit_napi_disable:
+	napi_disable(&priv->napi);
+	close_candev(dev);
+	return ret;
+}
+
+static int mscan_close(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+
+	netif_stop_queue(dev);
+	napi_disable(&priv->napi);
+
+	out_8(&regs->cantier, 0);
+	out_8(&regs->canrier, 0);
+	mscan_set_mode(dev, MSCAN_INIT_MODE);
+	close_candev(dev);
+	free_irq(dev->irq, dev);
+	priv->open_time = 0;
+
+	return 0;
+}
+
+static const struct net_device_ops mscan_netdev_ops = {
+       .ndo_open               = mscan_open,
+       .ndo_stop               = mscan_close,
+       .ndo_start_xmit         = mscan_start_xmit,
+};
+
+int register_mscandev(struct net_device *dev, int clock_src)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	u8 ctl1;
+
+	ctl1 = in_8(&regs->canctl1);
+	if (clock_src)
+		ctl1 |= MSCAN_CLKSRC;
+	else
+		ctl1 &= ~MSCAN_CLKSRC;
+
+	ctl1 |= MSCAN_CANE;
+	out_8(&regs->canctl1, ctl1);
+	udelay(100);
+
+	/* acceptance mask/acceptance code (accept everything) */
+	out_be16(&regs->canidar1_0, 0);
+	out_be16(&regs->canidar3_2, 0);
+	out_be16(&regs->canidar5_4, 0);
+	out_be16(&regs->canidar7_6, 0);
+
+	out_be16(&regs->canidmr1_0, 0xffff);
+	out_be16(&regs->canidmr3_2, 0xffff);
+	out_be16(&regs->canidmr5_4, 0xffff);
+	out_be16(&regs->canidmr7_6, 0xffff);
+	/* Two 32 bit Acceptance Filters */
+	out_8(&regs->canidac, MSCAN_AF_32BIT);
+
+	mscan_set_mode(dev, MSCAN_INIT_MODE);
+
+	return register_candev(dev);
+}
+
+void unregister_mscandev(struct net_device *dev)
+{
+	struct mscan_priv *priv = netdev_priv(dev);
+	struct mscan_regs *regs = (struct mscan_regs *)priv->reg_base;
+	mscan_set_mode(dev, MSCAN_INIT_MODE);
+	clrbits8(&regs->canctl1, MSCAN_CANE);
+	unregister_candev(dev);
+}
+
+struct net_device *alloc_mscandev(void)
+{
+	struct net_device *dev;
+	struct mscan_priv *priv;
+	int i;
+
+	dev = alloc_candev(sizeof(struct mscan_priv), MSCAN_ECHO_SKB_MAX);
+	if (!dev)
+		return NULL;
+	priv = netdev_priv(dev);
+
+	dev->netdev_ops = &mscan_netdev_ops;
+
+	dev->flags |= IFF_ECHO;	/* we support local echo */
+
+	netif_napi_add(dev, &priv->napi, mscan_rx_poll, 8);
+
+	priv->can.bittiming_const = &mscan_bittiming_const;
+	priv->can.do_set_bittiming = mscan_do_set_bittiming;
+	priv->can.do_set_mode = mscan_do_set_mode;
+
+	for (i = 0; i < TX_QUEUE_SIZE; i++) {
+		priv->tx_queue[i].id = i;
+		priv->tx_queue[i].mask = 1 << i;
+	}
+
+	return dev;
+}
+
+MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("CAN port driver for a MSCAN based chips");
diff --git a/drivers/net/can/mscan/mscan.h b/drivers/net/can/mscan/mscan.h
new file mode 100644
index 0000000..00fc4aa
--- /dev/null
+++ b/drivers/net/can/mscan/mscan.h
@@ -0,0 +1,296 @@
+/*
+ * Definitions of consts/structs to drive the Freescale MSCAN.
+ *
+ * Copyright (C) 2005-2006 Andrey Volkov <avolkov@varma-el.com>,
+ *                         Varma Electronics Oy
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License
+ * as published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MSCAN_H__
+#define __MSCAN_H__
+
+#include <linux/types.h>
+
+/* MSCAN control register 0 (CANCTL0) bits */
+#define MSCAN_RXFRM		0x80
+#define MSCAN_RXACT		0x40
+#define MSCAN_CSWAI		0x20
+#define MSCAN_SYNCH		0x10
+#define MSCAN_TIME		0x08
+#define MSCAN_WUPE		0x04
+#define MSCAN_SLPRQ		0x02
+#define MSCAN_INITRQ		0x01
+
+/* MSCAN control register 1 (CANCTL1) bits */
+#define MSCAN_CANE		0x80
+#define MSCAN_CLKSRC		0x40
+#define MSCAN_LOOPB		0x20
+#define MSCAN_LISTEN		0x10
+#define MSCAN_WUPM		0x04
+#define MSCAN_SLPAK		0x02
+#define MSCAN_INITAK		0x01
+
+/* Use the MPC5200 MSCAN variant? */
+#ifdef CONFIG_PPC
+#define MSCAN_FOR_MPC5200
+#endif
+
+#ifdef MSCAN_FOR_MPC5200
+#define MSCAN_CLKSRC_BUS	0
+#define MSCAN_CLKSRC_XTAL	MSCAN_CLKSRC
+#else
+#define MSCAN_CLKSRC_BUS	MSCAN_CLKSRC
+#define MSCAN_CLKSRC_XTAL	0
+#endif
+
+/* MSCAN receiver flag register (CANRFLG) bits */
+#define MSCAN_WUPIF		0x80
+#define MSCAN_CSCIF		0x40
+#define MSCAN_RSTAT1		0x20
+#define MSCAN_RSTAT0		0x10
+#define MSCAN_TSTAT1		0x08
+#define MSCAN_TSTAT0		0x04
+#define MSCAN_OVRIF		0x02
+#define MSCAN_RXF		0x01
+#define MSCAN_ERR_IF 		(MSCAN_OVRIF | MSCAN_CSCIF)
+#define MSCAN_RSTAT_MSK		(MSCAN_RSTAT1 | MSCAN_RSTAT0)
+#define MSCAN_TSTAT_MSK		(MSCAN_TSTAT1 | MSCAN_TSTAT0)
+#define MSCAN_STAT_MSK		(MSCAN_RSTAT_MSK | MSCAN_TSTAT_MSK)
+
+#define MSCAN_STATE_BUS_OFF	(MSCAN_RSTAT1 | MSCAN_RSTAT0 | \
+				 MSCAN_TSTAT1 | MSCAN_TSTAT0)
+#define MSCAN_STATE_TX(canrflg)	(((canrflg)&MSCAN_TSTAT_MSK)>>2)
+#define MSCAN_STATE_RX(canrflg)	(((canrflg)&MSCAN_RSTAT_MSK)>>4)
+#define MSCAN_STATE_ACTIVE	0
+#define MSCAN_STATE_WARNING	1
+#define MSCAN_STATE_PASSIVE	2
+#define MSCAN_STATE_BUSOFF	3
+
+/* MSCAN receiver interrupt enable register (CANRIER) bits */
+#define MSCAN_WUPIE		0x80
+#define MSCAN_CSCIE		0x40
+#define MSCAN_RSTATE1		0x20
+#define MSCAN_RSTATE0		0x10
+#define MSCAN_TSTATE1		0x08
+#define MSCAN_TSTATE0		0x04
+#define MSCAN_OVRIE		0x02
+#define MSCAN_RXFIE		0x01
+
+/* MSCAN transmitter flag register (CANTFLG) bits */
+#define MSCAN_TXE2		0x04
+#define MSCAN_TXE1		0x02
+#define MSCAN_TXE0		0x01
+#define MSCAN_TXE		(MSCAN_TXE2 | MSCAN_TXE1 | MSCAN_TXE0)
+
+/* MSCAN transmitter interrupt enable register (CANTIER) bits */
+#define MSCAN_TXIE2		0x04
+#define MSCAN_TXIE1		0x02
+#define MSCAN_TXIE0		0x01
+#define MSCAN_TXIE		(MSCAN_TXIE2 | MSCAN_TXIE1 | MSCAN_TXIE0)
+
+/* MSCAN transmitter message abort request (CANTARQ) bits */
+#define MSCAN_ABTRQ2		0x04
+#define MSCAN_ABTRQ1		0x02
+#define MSCAN_ABTRQ0		0x01
+
+/* MSCAN transmitter message abort ack (CANTAAK) bits */
+#define MSCAN_ABTAK2		0x04
+#define MSCAN_ABTAK1		0x02
+#define MSCAN_ABTAK0		0x01
+
+/* MSCAN transmit buffer selection (CANTBSEL) bits */
+#define MSCAN_TX2		0x04
+#define MSCAN_TX1		0x02
+#define MSCAN_TX0		0x01
+
+/* MSCAN ID acceptance control register (CANIDAC) bits */
+#define MSCAN_IDAM1		0x20
+#define MSCAN_IDAM0		0x10
+#define MSCAN_IDHIT2		0x04
+#define MSCAN_IDHIT1		0x02
+#define MSCAN_IDHIT0		0x01
+
+#define MSCAN_AF_32BIT		0x00
+#define MSCAN_AF_16BIT		MSCAN_IDAM0
+#define MSCAN_AF_8BIT		MSCAN_IDAM1
+#define MSCAN_AF_CLOSED		(MSCAN_IDAM0|MSCAN_IDAM1)
+#define MSCAN_AF_MASK		(~(MSCAN_IDAM0|MSCAN_IDAM1))
+
+/* MSCAN Miscellaneous Register (CANMISC) bits */
+#define MSCAN_BOHOLD		0x01
+
+/* MSCAN Identifier Register (IDR) bits */
+#define MSCAN_SFF_RTR_SHIFT	4
+#define MSCAN_EFF_RTR_SHIFT	0
+#define MSCAN_EFF_FLAGS		0x18	/* IDE + SRR */
+
+#ifdef MSCAN_FOR_MPC5200
+#define _MSCAN_RESERVED_(n, num) u8 _res##n[num]
+#define _MSCAN_RESERVED_DSR_SIZE	2
+#else
+#define _MSCAN_RESERVED_(n, num)
+#define _MSCAN_RESERVED_DSR_SIZE	0
+#endif
+
+/* Structure of the hardware registers */
+struct mscan_regs {
+	/* (see doc S12MSCANV3/D)		  MPC5200    MSCAN */
+	u8 canctl0;				/* + 0x00     0x00 */
+	u8 canctl1;				/* + 0x01     0x01 */
+	_MSCAN_RESERVED_(1, 2);			/* + 0x02          */
+	u8 canbtr0;				/* + 0x04     0x02 */
+	u8 canbtr1;				/* + 0x05     0x03 */
+	_MSCAN_RESERVED_(2, 2);			/* + 0x06          */
+	u8 canrflg;				/* + 0x08     0x04 */
+	u8 canrier;				/* + 0x09     0x05 */
+	_MSCAN_RESERVED_(3, 2);			/* + 0x0a          */
+	u8 cantflg;				/* + 0x0c     0x06 */
+	u8 cantier;				/* + 0x0d     0x07 */
+	_MSCAN_RESERVED_(4, 2);			/* + 0x0e          */
+	u8 cantarq;				/* + 0x10     0x08 */
+	u8 cantaak;				/* + 0x11     0x09 */
+	_MSCAN_RESERVED_(5, 2);			/* + 0x12          */
+	u8 cantbsel;				/* + 0x14     0x0a */
+	u8 canidac;				/* + 0x15     0x0b */
+	u8 reserved;				/* + 0x16     0x0c */
+	_MSCAN_RESERVED_(6, 5);			/* + 0x17          */
+#ifndef MSCAN_FOR_MPC5200
+	u8 canmisc;				/*            0x0d */
+#endif
+	u8 canrxerr;				/* + 0x1c     0x0e */
+	u8 cantxerr;				/* + 0x1d     0x0f */
+	_MSCAN_RESERVED_(7, 2);			/* + 0x1e          */
+	u16 canidar1_0;				/* + 0x20     0x10 */
+	_MSCAN_RESERVED_(8, 2);			/* + 0x22          */
+	u16 canidar3_2;				/* + 0x24     0x12 */
+	_MSCAN_RESERVED_(9, 2);			/* + 0x26          */
+	u16 canidmr1_0;				/* + 0x28     0x14 */
+	_MSCAN_RESERVED_(10, 2);		/* + 0x2a          */
+	u16 canidmr3_2;				/* + 0x2c     0x16 */
+	_MSCAN_RESERVED_(11, 2);		/* + 0x2e          */
+	u16 canidar5_4;				/* + 0x30     0x18 */
+	_MSCAN_RESERVED_(12, 2);		/* + 0x32          */
+	u16 canidar7_6;				/* + 0x34     0x1a */
+	_MSCAN_RESERVED_(13, 2);		/* + 0x36          */
+	u16 canidmr5_4;				/* + 0x38     0x1c */
+	_MSCAN_RESERVED_(14, 2);		/* + 0x3a          */
+	u16 canidmr7_6;				/* + 0x3c     0x1e */
+	_MSCAN_RESERVED_(15, 2);		/* + 0x3e          */
+	struct {
+		u16 idr1_0;			/* + 0x40     0x20 */
+		 _MSCAN_RESERVED_(16, 2);	/* + 0x42          */
+		u16 idr3_2;			/* + 0x44     0x22 */
+		 _MSCAN_RESERVED_(17, 2);	/* + 0x46          */
+		u16 dsr1_0;			/* + 0x48     0x24 */
+		 _MSCAN_RESERVED_(18, 2);	/* + 0x4a          */
+		u16 dsr3_2;			/* + 0x4c     0x26 */
+		 _MSCAN_RESERVED_(19, 2);	/* + 0x4e          */
+		u16 dsr5_4;			/* + 0x50     0x28 */
+		 _MSCAN_RESERVED_(20, 2);	/* + 0x52          */
+		u16 dsr7_6;			/* + 0x54     0x2a */
+		 _MSCAN_RESERVED_(21, 2);	/* + 0x56          */
+		u8 dlr;				/* + 0x58     0x2c */
+		 u8:8;				/* + 0x59     0x2d */
+		 _MSCAN_RESERVED_(22, 2);	/* + 0x5a          */
+		u16 time;			/* + 0x5c     0x2e */
+	} rx;
+	 _MSCAN_RESERVED_(23, 2);		/* + 0x5e          */
+	struct {
+		u16 idr1_0;			/* + 0x60     0x30 */
+		 _MSCAN_RESERVED_(24, 2);	/* + 0x62          */
+		u16 idr3_2;			/* + 0x64     0x32 */
+		 _MSCAN_RESERVED_(25, 2);	/* + 0x66          */
+		u16 dsr1_0;			/* + 0x68     0x34 */
+		 _MSCAN_RESERVED_(26, 2);	/* + 0x6a          */
+		u16 dsr3_2;			/* + 0x6c     0x36 */
+		 _MSCAN_RESERVED_(27, 2);	/* + 0x6e          */
+		u16 dsr5_4;			/* + 0x70     0x38 */
+		 _MSCAN_RESERVED_(28, 2);	/* + 0x72          */
+		u16 dsr7_6;			/* + 0x74     0x3a */
+		 _MSCAN_RESERVED_(29, 2);	/* + 0x76          */
+		u8 dlr;				/* + 0x78     0x3c */
+		u8 tbpr;			/* + 0x79     0x3d */
+		 _MSCAN_RESERVED_(30, 2);	/* + 0x7a          */
+		u16 time;			/* + 0x7c     0x3e */
+	} tx;
+	 _MSCAN_RESERVED_(31, 2);		/* + 0x7e          */
+} __attribute__ ((packed));
+
+#undef _MSCAN_RESERVED_
+#define MSCAN_REGION 	sizeof(struct mscan)
+
+#define MSCAN_NORMAL_MODE	0
+#define MSCAN_SLEEP_MODE	MSCAN_SLPRQ
+#define MSCAN_INIT_MODE		(MSCAN_INITRQ | MSCAN_SLPRQ)
+#define MSCAN_POWEROFF_MODE	(MSCAN_CSWAI | MSCAN_SLPRQ)
+#define MSCAN_SET_MODE_RETRIES	255
+#define MSCAN_ECHO_SKB_MAX	3
+
+#define BTR0_BRP_MASK		0x3f
+#define BTR0_SJW_SHIFT		6
+#define BTR0_SJW_MASK		(0x3 << BTR0_SJW_SHIFT)
+
+#define BTR1_TSEG1_MASK 	0xf
+#define BTR1_TSEG2_SHIFT	4
+#define BTR1_TSEG2_MASK 	(0x7 << BTR1_TSEG2_SHIFT)
+#define BTR1_SAM_SHIFT  	7
+
+#define BTR0_SET_BRP(brp)	(((brp) - 1) & BTR0_BRP_MASK)
+#define BTR0_SET_SJW(sjw)	((((sjw) - 1) << BTR0_SJW_SHIFT) & \
+				 BTR0_SJW_MASK)
+
+#define BTR1_SET_TSEG1(tseg1)	(((tseg1) - 1) &  BTR1_TSEG1_MASK)
+#define BTR1_SET_TSEG2(tseg2)	((((tseg2) - 1) << BTR1_TSEG2_SHIFT) & \
+				 BTR1_TSEG2_MASK)
+#define BTR1_SET_SAM(sam)	((sam) ? 1 << BTR1_SAM_SHIFT : 0)
+
+#define F_RX_PROGRESS	0
+#define F_TX_PROGRESS	1
+#define F_TX_WAIT_ALL	2
+
+#define TX_QUEUE_SIZE	3
+
+struct tx_queue_entry {
+	struct list_head list;
+	u8 mask;
+	u8 id;
+};
+
+struct mscan_priv {
+	struct can_priv can;	/* must be the first member */
+	long open_time;
+	unsigned long flags;
+	void __iomem *reg_base;	/* ioremap'ed address to registers */
+	u8 shadow_statflg;
+	u8 shadow_canrier;
+	u8 cur_pri;
+	u8 prev_buf_id;
+	u8 tx_active;
+
+	struct list_head tx_head;
+	struct tx_queue_entry tx_queue[TX_QUEUE_SIZE];
+	struct napi_struct napi;
+};
+
+extern struct net_device *alloc_mscandev(void);
+/*
+ * clock_src:
+ *	1 = The MSCAN clock source is the onchip Bus Clock.
+ *	0 = The MSCAN clock source is the chip Oscillator Clock.
+ */
+extern int register_mscandev(struct net_device *dev, int clock_src);
+extern void unregister_mscandev(struct net_device *dev);
+
+#endif /* __MSCAN_H__ */
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 16d2ecd..b4ba88a 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -296,11 +296,9 @@
 	uint8_t dlc;
 	int i;
 
-	skb = dev_alloc_skb(sizeof(struct can_frame));
+	skb = alloc_can_skb(dev, &cf);
 	if (skb == NULL)
 		return;
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CAN);
 
 	fi = priv->read_reg(priv, REG_FI);
 	dlc = fi & 0x0F;
@@ -323,8 +321,6 @@
 	if (fi & FI_RTR)
 		id |= CAN_RTR_FLAG;
 
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
 	cf->can_id = id;
 	cf->can_dlc = dlc;
 	for (i = 0; i < dlc; i++)
@@ -351,15 +347,9 @@
 	enum can_state state = priv->can.state;
 	uint8_t ecc, alc;
 
-	skb = dev_alloc_skb(sizeof(struct can_frame));
+	skb = alloc_can_err_skb(dev, &cf);
 	if (skb == NULL)
 		return -ENOMEM;
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CAN);
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
-	cf->can_id = CAN_ERR_FLAG;
-	cf->can_dlc = CAN_ERR_DLC;
 
 	if (isrc & IRQ_DOI) {
 		/* data overrun interrupt */
@@ -526,7 +516,7 @@
 
 	/* register interrupt handler, if not done by the device driver */
 	if (!(priv->flags & SJA1000_CUSTOM_IRQ_HANDLER)) {
-		err = request_irq(dev->irq, &sja1000_interrupt, priv->irq_flags,
+		err = request_irq(dev->irq, sja1000_interrupt, priv->irq_flags,
 				  dev->name, (void *)dev);
 		if (err) {
 			close_candev(dev);
@@ -565,7 +555,8 @@
 	struct net_device *dev;
 	struct sja1000_priv *priv;
 
-	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv);
+	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv,
+		SJA1000_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 302d2c7..97a622b 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -50,6 +50,8 @@
 #include <linux/can/dev.h>
 #include <linux/can/platform/sja1000.h>
 
+#define SJA1000_ECHO_SKB_MAX	1 /* the SJA1000 has one TX buffer object */
+
 #define SJA1000_MAX_IRQ 20	/* max. number of interrupts handled in ISR */
 
 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
new file mode 100644
index 0000000..07e8016
--- /dev/null
+++ b/drivers/net/can/ti_hecc.c
@@ -0,0 +1,993 @@
+/*
+ * TI HECC (CAN) device driver
+ *
+ * This driver supports TI's HECC (High End CAN Controller module) and the
+ * specs for the same is available at <http://www.ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed as is WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Your platform definitions should specify module ram offsets and interrupt
+ * number to use as follows:
+ *
+ * static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+ *         .scc_hecc_offset        = 0,
+ *         .scc_ram_offset         = 0x3000,
+ *         .hecc_ram_offset        = 0x3000,
+ *         .mbx_offset             = 0x2000,
+ *         .int_line               = 0,
+ *         .revision               = 1,
+ * };
+ *
+ * Please see include/can/platform/ti_hecc.h for description of above fields
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/platform/ti_hecc.h>
+
+#define DRV_NAME "ti_hecc"
+#define HECC_MODULE_VERSION     "0.7"
+MODULE_VERSION(HECC_MODULE_VERSION);
+#define DRV_DESC "TI High End CAN Controller Driver " HECC_MODULE_VERSION
+
+/* TX / RX Mailbox Configuration */
+#define HECC_MAX_MAILBOXES	32	/* hardware mailboxes - do not change */
+#define MAX_TX_PRIO		0x3F	/* hardware value - do not change */
+
+/*
+ * Important Note: TX mailbox configuration
+ * TX mailboxes should be restricted to the number of SKB buffers to avoid
+ * maintaining SKB buffers separately. TX mailboxes should be a power of 2
+ * for the mailbox logic to work.  Top mailbox numbers are reserved for RX
+ * and lower mailboxes for TX.
+ *
+ * HECC_MAX_TX_MBOX	HECC_MB_TX_SHIFT
+ * 4 (default)		2
+ * 8			3
+ * 16			4
+ */
+#define HECC_MB_TX_SHIFT	2 /* as per table above */
+#define HECC_MAX_TX_MBOX	BIT(HECC_MB_TX_SHIFT)
+
+#define HECC_TX_PRIO_SHIFT	(HECC_MB_TX_SHIFT)
+#define HECC_TX_PRIO_MASK	(MAX_TX_PRIO << HECC_MB_TX_SHIFT)
+#define HECC_TX_MB_MASK		(HECC_MAX_TX_MBOX - 1)
+#define HECC_TX_MASK		((HECC_MAX_TX_MBOX - 1) | HECC_TX_PRIO_MASK)
+#define HECC_TX_MBOX_MASK	(~(BIT(HECC_MAX_TX_MBOX) - 1))
+#define HECC_DEF_NAPI_WEIGHT	HECC_MAX_RX_MBOX
+
+/*
+ * Important Note: RX mailbox configuration
+ * RX mailboxes are further logically split into two - main and buffer
+ * mailboxes. The goal is to get all packets into main mailboxes as
+ * driven by mailbox number and receive priority (higher to lower) and
+ * buffer mailboxes are used to receive pkts while main mailboxes are being
+ * processed. This ensures in-order packet reception.
+ *
+ * Here are the recommended values for buffer mailbox. Note that RX mailboxes
+ * start after TX mailboxes:
+ *
+ * HECC_MAX_RX_MBOX		HECC_RX_BUFFER_MBOX	No of buffer mailboxes
+ * 28				12			8
+ * 16				20			4
+ */
+
+#define HECC_MAX_RX_MBOX	(HECC_MAX_MAILBOXES - HECC_MAX_TX_MBOX)
+#define HECC_RX_BUFFER_MBOX	12 /* as per table above */
+#define HECC_RX_FIRST_MBOX	(HECC_MAX_MAILBOXES - 1)
+#define HECC_RX_HIGH_MBOX_MASK	(~(BIT(HECC_RX_BUFFER_MBOX) - 1))
+
+/* TI HECC module registers */
+#define HECC_CANME		0x0	/* Mailbox enable */
+#define HECC_CANMD		0x4	/* Mailbox direction */
+#define HECC_CANTRS		0x8	/* Transmit request set */
+#define HECC_CANTRR		0xC	/* Transmit request */
+#define HECC_CANTA		0x10	/* Transmission acknowledge */
+#define HECC_CANAA		0x14	/* Abort acknowledge */
+#define HECC_CANRMP		0x18	/* Receive message pending */
+#define HECC_CANRML		0x1C	/* Remote message lost */
+#define HECC_CANRFP		0x20	/* Remote frame pending */
+#define HECC_CANGAM		0x24	/* SECC only:Global acceptance mask */
+#define HECC_CANMC		0x28	/* Master control */
+#define HECC_CANBTC		0x2C	/* Bit timing configuration */
+#define HECC_CANES		0x30	/* Error and status */
+#define HECC_CANTEC		0x34	/* Transmit error counter */
+#define HECC_CANREC		0x38	/* Receive error counter */
+#define HECC_CANGIF0		0x3C	/* Global interrupt flag 0 */
+#define HECC_CANGIM		0x40	/* Global interrupt mask */
+#define HECC_CANGIF1		0x44	/* Global interrupt flag 1 */
+#define HECC_CANMIM		0x48	/* Mailbox interrupt mask */
+#define HECC_CANMIL		0x4C	/* Mailbox interrupt level */
+#define HECC_CANOPC		0x50	/* Overwrite protection control */
+#define HECC_CANTIOC		0x54	/* Transmit I/O control */
+#define HECC_CANRIOC		0x58	/* Receive I/O control */
+#define HECC_CANLNT		0x5C	/* HECC only: Local network time */
+#define HECC_CANTOC		0x60	/* HECC only: Time-out control */
+#define HECC_CANTOS		0x64	/* HECC only: Time-out status */
+#define HECC_CANTIOCE		0x68	/* SCC only:Enhanced TX I/O control */
+#define HECC_CANRIOCE		0x6C	/* SCC only:Enhanced RX I/O control */
+
+/* Mailbox registers */
+#define HECC_CANMID		0x0
+#define HECC_CANMCF		0x4
+#define HECC_CANMDL		0x8
+#define HECC_CANMDH		0xC
+
+#define HECC_SET_REG		0xFFFFFFFF
+#define HECC_CANID_MASK		0x3FF	/* 18 bits mask for extended id's */
+#define HECC_CCE_WAIT_COUNT     100	/* Wait for ~1 sec for CCE bit */
+
+#define HECC_CANMC_SCM		BIT(13)	/* SCC compat mode */
+#define HECC_CANMC_CCR		BIT(12)	/* Change config request */
+#define HECC_CANMC_PDR		BIT(11)	/* Local Power down - for sleep mode */
+#define HECC_CANMC_ABO		BIT(7)	/* Auto Bus On */
+#define HECC_CANMC_STM		BIT(6)	/* Self test mode - loopback */
+#define HECC_CANMC_SRES		BIT(5)	/* Software reset */
+
+#define HECC_CANTIOC_EN		BIT(3)	/* Enable CAN TX I/O pin */
+#define HECC_CANRIOC_EN		BIT(3)	/* Enable CAN RX I/O pin */
+
+#define HECC_CANMID_IDE		BIT(31)	/* Extended frame format */
+#define HECC_CANMID_AME		BIT(30)	/* Acceptance mask enable */
+#define HECC_CANMID_AAM		BIT(29)	/* Auto answer mode */
+
+#define HECC_CANES_FE		BIT(24)	/* form error */
+#define HECC_CANES_BE		BIT(23)	/* bit error */
+#define HECC_CANES_SA1		BIT(22)	/* stuck at dominant error */
+#define HECC_CANES_CRCE		BIT(21)	/* CRC error */
+#define HECC_CANES_SE		BIT(20)	/* stuff bit error */
+#define HECC_CANES_ACKE		BIT(19)	/* ack error */
+#define HECC_CANES_BO		BIT(18)	/* Bus off status */
+#define HECC_CANES_EP		BIT(17)	/* Error passive status */
+#define HECC_CANES_EW		BIT(16)	/* Error warning status */
+#define HECC_CANES_SMA		BIT(5)	/* suspend mode ack */
+#define HECC_CANES_CCE		BIT(4)	/* Change config enabled */
+#define HECC_CANES_PDA		BIT(3)	/* Power down mode ack */
+
+#define HECC_CANBTC_SAM		BIT(7)	/* sample points */
+
+#define HECC_BUS_ERROR		(HECC_CANES_FE | HECC_CANES_BE |\
+				HECC_CANES_CRCE | HECC_CANES_SE |\
+				HECC_CANES_ACKE)
+
+#define HECC_CANMCF_RTR		BIT(4)	/* Remote transmit request */
+
+#define HECC_CANGIF_MAIF	BIT(17)	/* Message alarm interrupt */
+#define HECC_CANGIF_TCOIF	BIT(16) /* Timer counter overflow int */
+#define HECC_CANGIF_GMIF	BIT(15)	/* Global mailbox interrupt */
+#define HECC_CANGIF_AAIF	BIT(14)	/* Abort ack interrupt */
+#define HECC_CANGIF_WDIF	BIT(13)	/* Write denied interrupt */
+#define HECC_CANGIF_WUIF	BIT(12)	/* Wake up interrupt */
+#define HECC_CANGIF_RMLIF	BIT(11)	/* Receive message lost interrupt */
+#define HECC_CANGIF_BOIF	BIT(10)	/* Bus off interrupt */
+#define HECC_CANGIF_EPIF	BIT(9)	/* Error passive interrupt */
+#define HECC_CANGIF_WLIF	BIT(8)	/* Warning level interrupt */
+#define HECC_CANGIF_MBOX_MASK	0x1F	/* Mailbox number mask */
+#define HECC_CANGIM_I1EN	BIT(1)	/* Int line 1 enable */
+#define HECC_CANGIM_I0EN	BIT(0)	/* Int line 0 enable */
+#define HECC_CANGIM_DEF_MASK	0x700	/* only busoff/warning/passive */
+#define HECC_CANGIM_SIL		BIT(2)	/* system interrupts to int line 1 */
+
+/* CAN Bittiming constants as per HECC specs */
+static struct can_bittiming_const ti_hecc_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 256,
+	.brp_inc = 1,
+};
+
+struct ti_hecc_priv {
+	struct can_priv can;	/* MUST be first member/field */
+	struct napi_struct napi;
+	struct net_device *ndev;
+	struct clk *clk;
+	void __iomem *base;
+	u32 scc_ram_offset;
+	u32 hecc_ram_offset;
+	u32 mbx_offset;
+	u32 int_line;
+	spinlock_t mbx_lock; /* CANME register needs protection */
+	u32 tx_head;
+	u32 tx_tail;
+	u32 rx_next;
+};
+
+static inline int get_tx_head_mb(struct ti_hecc_priv *priv)
+{
+	return priv->tx_head & HECC_TX_MB_MASK;
+}
+
+static inline int get_tx_tail_mb(struct ti_hecc_priv *priv)
+{
+	return priv->tx_tail & HECC_TX_MB_MASK;
+}
+
+static inline int get_tx_head_prio(struct ti_hecc_priv *priv)
+{
+	return (priv->tx_head >> HECC_TX_PRIO_SHIFT) & MAX_TX_PRIO;
+}
+
+static inline void hecc_write_lam(struct ti_hecc_priv *priv, u32 mbxno, u32 val)
+{
+	__raw_writel(val, priv->base + priv->hecc_ram_offset + mbxno * 4);
+}
+
+static inline void hecc_write_mbx(struct ti_hecc_priv *priv, u32 mbxno,
+	u32 reg, u32 val)
+{
+	__raw_writel(val, priv->base + priv->mbx_offset + mbxno * 0x10 +
+			reg);
+}
+
+static inline u32 hecc_read_mbx(struct ti_hecc_priv *priv, u32 mbxno, u32 reg)
+{
+	return __raw_readl(priv->base + priv->mbx_offset + mbxno * 0x10 +
+			reg);
+}
+
+static inline void hecc_write(struct ti_hecc_priv *priv, u32 reg, u32 val)
+{
+	__raw_writel(val, priv->base + reg);
+}
+
+static inline u32 hecc_read(struct ti_hecc_priv *priv, int reg)
+{
+	return __raw_readl(priv->base + reg);
+}
+
+static inline void hecc_set_bit(struct ti_hecc_priv *priv, int reg,
+	u32 bit_mask)
+{
+	hecc_write(priv, reg, hecc_read(priv, reg) | bit_mask);
+}
+
+static inline void hecc_clear_bit(struct ti_hecc_priv *priv, int reg,
+	u32 bit_mask)
+{
+	hecc_write(priv, reg, hecc_read(priv, reg) & ~bit_mask);
+}
+
+static inline u32 hecc_get_bit(struct ti_hecc_priv *priv, int reg, u32 bit_mask)
+{
+	return (hecc_read(priv, reg) & bit_mask) ? 1 : 0;
+}
+
+static int ti_hecc_get_state(const struct net_device *ndev,
+	enum can_state *state)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	*state = priv->can.state;
+	return 0;
+}
+
+static int ti_hecc_set_btc(struct ti_hecc_priv *priv)
+{
+	struct can_bittiming *bit_timing = &priv->can.bittiming;
+	u32 can_btc;
+
+	can_btc = (bit_timing->phase_seg2 - 1) & 0x7;
+	can_btc |= ((bit_timing->phase_seg1 + bit_timing->prop_seg - 1)
+			& 0xF) << 3;
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) {
+		if (bit_timing->brp > 4)
+			can_btc |= HECC_CANBTC_SAM;
+		else
+			dev_warn(priv->ndev->dev.parent, "WARN: Triple" \
+				"sampling not set due to h/w limitations");
+	}
+	can_btc |= ((bit_timing->sjw - 1) & 0x3) << 8;
+	can_btc |= ((bit_timing->brp - 1) & 0xFF) << 16;
+
+	/* ERM being set to 0 by default meaning resync at falling edge */
+
+	hecc_write(priv, HECC_CANBTC, can_btc);
+	dev_info(priv->ndev->dev.parent, "setting CANBTC=%#x\n", can_btc);
+
+	return 0;
+}
+
+static void ti_hecc_reset(struct net_device *ndev)
+{
+	u32 cnt;
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	dev_dbg(ndev->dev.parent, "resetting hecc ...\n");
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SRES);
+
+	/* Set change control request and wait till enabled */
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+
+	/*
+	 * INFO: It has been observed that at times CCE bit may not be
+	 * set and hw seems to be ok even if this bit is not set so
+	 * timing out with a timing of 1ms to respect the specs
+	 */
+	cnt = HECC_CCE_WAIT_COUNT;
+	while (!hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) {
+		--cnt;
+		udelay(10);
+	}
+
+	/*
+	 * Note: On HECC, BTC can be programmed only in initialization mode, so
+	 * it is expected that the can bittiming parameters are set via ip
+	 * utility before the device is opened
+	 */
+	ti_hecc_set_btc(priv);
+
+	/* Clear CCR (and CANMC register) and wait for CCE = 0 enable */
+	hecc_write(priv, HECC_CANMC, 0);
+
+	/*
+	 * INFO: CAN net stack handles bus off and hence disabling auto-bus-on
+	 * hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_ABO);
+	 */
+
+	/*
+	 * INFO: It has been observed that at times CCE bit may not be
+	 * set and hw seems to be ok even if this bit is not set so
+	 */
+	cnt = HECC_CCE_WAIT_COUNT;
+	while (hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) {
+		--cnt;
+		udelay(10);
+	}
+
+	/* Enable TX and RX I/O Control pins */
+	hecc_write(priv, HECC_CANTIOC, HECC_CANTIOC_EN);
+	hecc_write(priv, HECC_CANRIOC, HECC_CANRIOC_EN);
+
+	/* Clear registers for clean operation */
+	hecc_write(priv, HECC_CANTA, HECC_SET_REG);
+	hecc_write(priv, HECC_CANRMP, HECC_SET_REG);
+	hecc_write(priv, HECC_CANGIF0, HECC_SET_REG);
+	hecc_write(priv, HECC_CANGIF1, HECC_SET_REG);
+	hecc_write(priv, HECC_CANME, 0);
+	hecc_write(priv, HECC_CANMD, 0);
+
+	/* SCC compat mode NOT supported (and not needed too) */
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SCM);
+}
+
+static void ti_hecc_start(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	u32 cnt, mbxno, mbx_mask;
+
+	/* put HECC in initialization mode and set btc */
+	ti_hecc_reset(ndev);
+
+	priv->tx_head = priv->tx_tail = HECC_TX_MASK;
+	priv->rx_next = HECC_RX_FIRST_MBOX;
+
+	/* Enable local and global acceptance mask registers */
+	hecc_write(priv, HECC_CANGAM, HECC_SET_REG);
+
+	/* Prepare configured mailboxes to receive messages */
+	for (cnt = 0; cnt < HECC_MAX_RX_MBOX; cnt++) {
+		mbxno = HECC_MAX_MAILBOXES - 1 - cnt;
+		mbx_mask = BIT(mbxno);
+		hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+		hecc_write_mbx(priv, mbxno, HECC_CANMID, HECC_CANMID_AME);
+		hecc_write_lam(priv, mbxno, HECC_SET_REG);
+		hecc_set_bit(priv, HECC_CANMD, mbx_mask);
+		hecc_set_bit(priv, HECC_CANME, mbx_mask);
+		hecc_set_bit(priv, HECC_CANMIM, mbx_mask);
+	}
+
+	/* Prevent message over-write & Enable interrupts */
+	hecc_write(priv, HECC_CANOPC, HECC_SET_REG);
+	if (priv->int_line) {
+		hecc_write(priv, HECC_CANMIL, HECC_SET_REG);
+		hecc_write(priv, HECC_CANGIM, HECC_CANGIM_DEF_MASK |
+			HECC_CANGIM_I1EN | HECC_CANGIM_SIL);
+	} else {
+		hecc_write(priv, HECC_CANMIL, 0);
+		hecc_write(priv, HECC_CANGIM,
+			HECC_CANGIM_DEF_MASK | HECC_CANGIM_I0EN);
+	}
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+static void ti_hecc_stop(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	/* Disable interrupts and disable mailboxes */
+	hecc_write(priv, HECC_CANGIM, 0);
+	hecc_write(priv, HECC_CANMIM, 0);
+	hecc_write(priv, HECC_CANME, 0);
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int ti_hecc_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	int ret = 0;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		ti_hecc_start(ndev);
+		netif_wake_queue(ndev);
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * ti_hecc_xmit: HECC Transmit
+ *
+ * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the
+ * priority of the mailbox for tranmission is dependent upon priority setting
+ * field in mailbox registers. The mailbox with highest value in priority field
+ * is transmitted first. Only when two mailboxes have the same value in
+ * priority field the highest numbered mailbox is transmitted first.
+ *
+ * To utilize the HECC priority feature as described above we start with the
+ * highest numbered mailbox with highest priority level and move on to the next
+ * mailbox with the same priority level and so on. Once we loop through all the
+ * transmit mailboxes we choose the next priority level (lower) and so on
+ * until we reach the lowest priority level on the lowest numbered mailbox
+ * when we stop transmission until all mailboxes are transmitted and then
+ * restart at highest numbered mailbox with highest priority.
+ *
+ * Two counters (head and tail) are used to track the next mailbox to transmit
+ * and to track the echo buffer for already transmitted mailbox. The queue
+ * is stopped when all the mailboxes are busy or when there is a priority
+ * value roll-over happens.
+ */
+static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	u32 mbxno, mbx_mask, data;
+	unsigned long flags;
+
+	mbxno = get_tx_head_mb(priv);
+	mbx_mask = BIT(mbxno);
+	spin_lock_irqsave(&priv->mbx_lock, flags);
+	if (unlikely(hecc_read(priv, HECC_CANME) & mbx_mask)) {
+		spin_unlock_irqrestore(&priv->mbx_lock, flags);
+		netif_stop_queue(ndev);
+		dev_err(priv->ndev->dev.parent,
+			"BUG: TX mbx not ready tx_head=%08X, tx_tail=%08X\n",
+			priv->tx_head, priv->tx_tail);
+		return NETDEV_TX_BUSY;
+	}
+	spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+	/* Prepare mailbox for transmission */
+	data = min_t(u8, cf->can_dlc, 8);
+	if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */
+		data |= HECC_CANMCF_RTR;
+	data |= get_tx_head_prio(priv) << 8;
+	hecc_write_mbx(priv, mbxno, HECC_CANMCF, data);
+
+	if (cf->can_id & CAN_EFF_FLAG) /* Extended frame format */
+		data = (cf->can_id & CAN_EFF_MASK) | HECC_CANMID_IDE;
+	else /* Standard frame format */
+		data = (cf->can_id & CAN_SFF_MASK) << 18;
+	hecc_write_mbx(priv, mbxno, HECC_CANMID, data);
+	hecc_write_mbx(priv, mbxno, HECC_CANMDL,
+		be32_to_cpu(*(u32 *)(cf->data)));
+	if (cf->can_dlc > 4)
+		hecc_write_mbx(priv, mbxno, HECC_CANMDH,
+			be32_to_cpu(*(u32 *)(cf->data + 4)));
+	else
+		*(u32 *)(cf->data + 4) = 0;
+	can_put_echo_skb(skb, ndev, mbxno);
+
+	spin_lock_irqsave(&priv->mbx_lock, flags);
+	--priv->tx_head;
+	if ((hecc_read(priv, HECC_CANME) & BIT(get_tx_head_mb(priv))) ||
+		(priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK) {
+		netif_stop_queue(ndev);
+	}
+	hecc_set_bit(priv, HECC_CANME, mbx_mask);
+	spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+	hecc_clear_bit(priv, HECC_CANMD, mbx_mask);
+	hecc_set_bit(priv, HECC_CANMIM, mbx_mask);
+	hecc_write(priv, HECC_CANTRS, mbx_mask);
+
+	return NETDEV_TX_OK;
+}
+
+static int ti_hecc_rx_pkt(struct ti_hecc_priv *priv, int mbxno)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 data, mbx_mask;
+	unsigned long flags;
+
+	skb = alloc_can_skb(priv->ndev, &cf);
+	if (!skb) {
+		if (printk_ratelimit())
+			dev_err(priv->ndev->dev.parent,
+				"ti_hecc_rx_pkt: alloc_can_skb() failed\n");
+		return -ENOMEM;
+	}
+
+	mbx_mask = BIT(mbxno);
+	data = hecc_read_mbx(priv, mbxno, HECC_CANMID);
+	if (data & HECC_CANMID_IDE)
+		cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG;
+	else
+		cf->can_id = (data >> 18) & CAN_SFF_MASK;
+	data = hecc_read_mbx(priv, mbxno, HECC_CANMCF);
+	if (data & HECC_CANMCF_RTR)
+		cf->can_id |= CAN_RTR_FLAG;
+	cf->can_dlc = data & 0xF;
+	data = hecc_read_mbx(priv, mbxno, HECC_CANMDL);
+	*(u32 *)(cf->data) = cpu_to_be32(data);
+	if (cf->can_dlc > 4) {
+		data = hecc_read_mbx(priv, mbxno, HECC_CANMDH);
+		*(u32 *)(cf->data + 4) = cpu_to_be32(data);
+	} else {
+		*(u32 *)(cf->data + 4) = 0;
+	}
+	spin_lock_irqsave(&priv->mbx_lock, flags);
+	hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+	hecc_write(priv, HECC_CANRMP, mbx_mask);
+	/* enable mailbox only if it is part of rx buffer mailboxes */
+	if (priv->rx_next < HECC_RX_BUFFER_MBOX)
+		hecc_set_bit(priv, HECC_CANME, mbx_mask);
+	spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+	stats->rx_bytes += cf->can_dlc;
+	netif_receive_skb(skb);
+	stats->rx_packets++;
+
+	return 0;
+}
+
+/*
+ * ti_hecc_rx_poll - HECC receive pkts
+ *
+ * The receive mailboxes start from highest numbered mailbox till last xmit
+ * mailbox. On CAN frame reception the hardware places the data into highest
+ * numbered mailbox that matches the CAN ID filter. Since all receive mailboxes
+ * have same filtering (ALL CAN frames) packets will arrive in the highest
+ * available RX mailbox and we need to ensure in-order packet reception.
+ *
+ * To ensure the packets are received in the right order we logically divide
+ * the RX mailboxes into main and buffer mailboxes. Packets are received as per
+ * mailbox priotity (higher to lower) in the main bank and once it is full we
+ * disable further reception into main mailboxes. While the main mailboxes are
+ * processed in NAPI, further packets are received in buffer mailboxes.
+ *
+ * We maintain a RX next mailbox counter to process packets and once all main
+ * mailboxe packets are passed to the upper stack we enable all of them but
+ * continue to process packets received in buffer mailboxes. With each packet
+ * received from buffer mailbox we enable it immediately so as to handle the
+ * overflow from higher mailboxes.
+ */
+static int ti_hecc_rx_poll(struct napi_struct *napi, int quota)
+{
+	struct net_device *ndev = napi->dev;
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	u32 num_pkts = 0;
+	u32 mbx_mask;
+	unsigned long pending_pkts, flags;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	while ((pending_pkts = hecc_read(priv, HECC_CANRMP)) &&
+		num_pkts < quota) {
+		mbx_mask = BIT(priv->rx_next); /* next rx mailbox to process */
+		if (mbx_mask & pending_pkts) {
+			if (ti_hecc_rx_pkt(priv, priv->rx_next) < 0)
+				return num_pkts;
+			++num_pkts;
+		} else if (priv->rx_next > HECC_RX_BUFFER_MBOX) {
+			break; /* pkt not received yet */
+		}
+		--priv->rx_next;
+		if (priv->rx_next == HECC_RX_BUFFER_MBOX) {
+			/* enable high bank mailboxes */
+			spin_lock_irqsave(&priv->mbx_lock, flags);
+			mbx_mask = hecc_read(priv, HECC_CANME);
+			mbx_mask |= HECC_RX_HIGH_MBOX_MASK;
+			hecc_write(priv, HECC_CANME, mbx_mask);
+			spin_unlock_irqrestore(&priv->mbx_lock, flags);
+		} else if (priv->rx_next == HECC_MAX_TX_MBOX - 1) {
+			priv->rx_next = HECC_RX_FIRST_MBOX;
+			break;
+		}
+	}
+
+	/* Enable packet interrupt if all pkts are handled */
+	if (hecc_read(priv, HECC_CANRMP) == 0) {
+		napi_complete(napi);
+		/* Re-enable RX mailbox interrupts */
+		mbx_mask = hecc_read(priv, HECC_CANMIM);
+		mbx_mask |= HECC_TX_MBOX_MASK;
+		hecc_write(priv, HECC_CANMIM, mbx_mask);
+	}
+
+	return num_pkts;
+}
+
+static int ti_hecc_error(struct net_device *ndev, int int_status,
+	int err_status)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	/* propogate the error condition to the can stack */
+	skb = alloc_can_err_skb(ndev, &cf);
+	if (!skb) {
+		if (printk_ratelimit())
+			dev_err(priv->ndev->dev.parent,
+				"ti_hecc_error: alloc_can_err_skb() failed\n");
+		return -ENOMEM;
+	}
+
+	if (int_status & HECC_CANGIF_WLIF) { /* warning level int */
+		if ((int_status & HECC_CANGIF_BOIF) == 0) {
+			priv->can.state = CAN_STATE_ERROR_WARNING;
+			++priv->can.can_stats.error_warning;
+			cf->can_id |= CAN_ERR_CRTL;
+			if (hecc_read(priv, HECC_CANTEC) > 96)
+				cf->data[1] |= CAN_ERR_CRTL_TX_WARNING;
+			if (hecc_read(priv, HECC_CANREC) > 96)
+				cf->data[1] |= CAN_ERR_CRTL_RX_WARNING;
+		}
+		hecc_set_bit(priv, HECC_CANES, HECC_CANES_EW);
+		dev_dbg(priv->ndev->dev.parent, "Error Warning interrupt\n");
+		hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+	}
+
+	if (int_status & HECC_CANGIF_EPIF) { /* error passive int */
+		if ((int_status & HECC_CANGIF_BOIF) == 0) {
+			priv->can.state = CAN_STATE_ERROR_PASSIVE;
+			++priv->can.can_stats.error_passive;
+			cf->can_id |= CAN_ERR_CRTL;
+			if (hecc_read(priv, HECC_CANTEC) > 127)
+				cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
+			if (hecc_read(priv, HECC_CANREC) > 127)
+				cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+		}
+		hecc_set_bit(priv, HECC_CANES, HECC_CANES_EP);
+		dev_dbg(priv->ndev->dev.parent, "Error passive interrupt\n");
+		hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+	}
+
+	/*
+	 * Need to check busoff condition in error status register too to
+	 * ensure warning interrupts don't hog the system
+	 */
+	if ((int_status & HECC_CANGIF_BOIF) || (err_status & HECC_CANES_BO)) {
+		priv->can.state = CAN_STATE_BUS_OFF;
+		cf->can_id |= CAN_ERR_BUSOFF;
+		hecc_set_bit(priv, HECC_CANES, HECC_CANES_BO);
+		hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+		/* Disable all interrupts in bus-off to avoid int hog */
+		hecc_write(priv, HECC_CANGIM, 0);
+		can_bus_off(ndev);
+	}
+
+	if (err_status & HECC_BUS_ERROR) {
+		++priv->can.can_stats.bus_error;
+		cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
+		cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+		if (err_status & HECC_CANES_FE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_FE);
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+		}
+		if (err_status & HECC_CANES_BE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_BE);
+			cf->data[2] |= CAN_ERR_PROT_BIT;
+		}
+		if (err_status & HECC_CANES_SE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_SE);
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+		}
+		if (err_status & HECC_CANES_CRCE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_CRCE);
+			cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
+					CAN_ERR_PROT_LOC_CRC_DEL;
+		}
+		if (err_status & HECC_CANES_ACKE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_ACKE);
+			cf->data[2] |= CAN_ERR_PROT_LOC_ACK |
+					CAN_ERR_PROT_LOC_ACK_DEL;
+		}
+	}
+
+	netif_receive_skb(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+	return 0;
+}
+
+static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	u32 mbxno, mbx_mask, int_status, err_status;
+	unsigned long ack, flags;
+
+	int_status = hecc_read(priv,
+		(priv->int_line) ? HECC_CANGIF1 : HECC_CANGIF0);
+
+	if (!int_status)
+		return IRQ_NONE;
+
+	err_status = hecc_read(priv, HECC_CANES);
+	if (err_status & (HECC_BUS_ERROR | HECC_CANES_BO |
+		HECC_CANES_EP | HECC_CANES_EW))
+			ti_hecc_error(ndev, int_status, err_status);
+
+	if (int_status & HECC_CANGIF_GMIF) {
+		while (priv->tx_tail - priv->tx_head > 0) {
+			mbxno = get_tx_tail_mb(priv);
+			mbx_mask = BIT(mbxno);
+			if (!(mbx_mask & hecc_read(priv, HECC_CANTA)))
+				break;
+			hecc_clear_bit(priv, HECC_CANMIM, mbx_mask);
+			hecc_write(priv, HECC_CANTA, mbx_mask);
+			spin_lock_irqsave(&priv->mbx_lock, flags);
+			hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+			spin_unlock_irqrestore(&priv->mbx_lock, flags);
+			stats->tx_bytes += hecc_read_mbx(priv, mbxno,
+						HECC_CANMCF) & 0xF;
+			stats->tx_packets++;
+			can_get_echo_skb(ndev, mbxno);
+			--priv->tx_tail;
+		}
+
+		/* restart queue if wrap-up or if queue stalled on last pkt */
+		if (((priv->tx_head == priv->tx_tail) &&
+		((priv->tx_head & HECC_TX_MASK) != HECC_TX_MASK)) ||
+		(((priv->tx_tail & HECC_TX_MASK) == HECC_TX_MASK) &&
+		((priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK)))
+			netif_wake_queue(ndev);
+
+		/* Disable RX mailbox interrupts and let NAPI reenable them */
+		if (hecc_read(priv, HECC_CANRMP)) {
+			ack = hecc_read(priv, HECC_CANMIM);
+			ack &= BIT(HECC_MAX_TX_MBOX) - 1;
+			hecc_write(priv, HECC_CANMIM, ack);
+			napi_schedule(&priv->napi);
+		}
+	}
+
+	/* clear all interrupt conditions - read back to avoid spurious ints */
+	if (priv->int_line) {
+		hecc_write(priv, HECC_CANGIF1, HECC_SET_REG);
+		int_status = hecc_read(priv, HECC_CANGIF1);
+	} else {
+		hecc_write(priv, HECC_CANGIF0, HECC_SET_REG);
+		int_status = hecc_read(priv, HECC_CANGIF0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ti_hecc_open(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	int err;
+
+	err = request_irq(ndev->irq, ti_hecc_interrupt, IRQF_SHARED,
+			ndev->name, ndev);
+	if (err) {
+		dev_err(ndev->dev.parent, "error requesting interrupt\n");
+		return err;
+	}
+
+	/* Open common can device */
+	err = open_candev(ndev);
+	if (err) {
+		dev_err(ndev->dev.parent, "open_candev() failed %d\n", err);
+		free_irq(ndev->irq, ndev);
+		return err;
+	}
+
+	clk_enable(priv->clk);
+	ti_hecc_start(ndev);
+	napi_enable(&priv->napi);
+	netif_start_queue(ndev);
+
+	return 0;
+}
+
+static int ti_hecc_close(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	ti_hecc_stop(ndev);
+	free_irq(ndev->irq, ndev);
+	clk_disable(priv->clk);
+	close_candev(ndev);
+
+	return 0;
+}
+
+static const struct net_device_ops ti_hecc_netdev_ops = {
+	.ndo_open		= ti_hecc_open,
+	.ndo_stop		= ti_hecc_close,
+	.ndo_start_xmit		= ti_hecc_xmit,
+};
+
+static int ti_hecc_probe(struct platform_device *pdev)
+{
+	struct net_device *ndev = (struct net_device *)0;
+	struct ti_hecc_priv *priv;
+	struct ti_hecc_platform_data *pdata;
+	struct resource *mem, *irq;
+	void __iomem *addr;
+	int err = -ENODEV;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data\n");
+		goto probe_exit;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "No mem resources\n");
+		goto probe_exit;
+	}
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "No irq resource\n");
+		goto probe_exit;
+	}
+	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
+		dev_err(&pdev->dev, "HECC region already claimed\n");
+		err = -EBUSY;
+		goto probe_exit;
+	}
+	addr = ioremap(mem->start, resource_size(mem));
+	if (!addr) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		err = -ENOMEM;
+		goto probe_exit_free_region;
+	}
+
+	ndev = alloc_candev(sizeof(struct ti_hecc_priv), HECC_MAX_TX_MBOX);
+	if (!ndev) {
+		dev_err(&pdev->dev, "alloc_candev failed\n");
+		err = -ENOMEM;
+		goto probe_exit_iounmap;
+	}
+
+	priv = netdev_priv(ndev);
+	priv->ndev = ndev;
+	priv->base = addr;
+	priv->scc_ram_offset = pdata->scc_ram_offset;
+	priv->hecc_ram_offset = pdata->hecc_ram_offset;
+	priv->mbx_offset = pdata->mbx_offset;
+	priv->int_line = pdata->int_line;
+
+	priv->can.bittiming_const = &ti_hecc_bittiming_const;
+	priv->can.do_set_mode = ti_hecc_do_set_mode;
+	priv->can.do_get_state = ti_hecc_get_state;
+
+	ndev->irq = irq->start;
+	ndev->flags |= IFF_ECHO;
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	ndev->netdev_ops = &ti_hecc_netdev_ops;
+
+	priv->clk = clk_get(&pdev->dev, "hecc_ck");
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "No clock available\n");
+		err = PTR_ERR(priv->clk);
+		priv->clk = NULL;
+		goto probe_exit_candev;
+	}
+	priv->can.clock.freq = clk_get_rate(priv->clk);
+	netif_napi_add(ndev, &priv->napi, ti_hecc_rx_poll,
+		HECC_DEF_NAPI_WEIGHT);
+
+	err = register_candev(ndev);
+	if (err) {
+		dev_err(&pdev->dev, "register_candev() failed\n");
+		goto probe_exit_clk;
+	}
+	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n",
+		priv->base, (u32) ndev->irq);
+
+	return 0;
+
+probe_exit_clk:
+	clk_put(priv->clk);
+probe_exit_candev:
+	free_candev(ndev);
+probe_exit_iounmap:
+	iounmap(addr);
+probe_exit_free_region:
+	release_mem_region(mem->start, resource_size(mem));
+probe_exit:
+	return err;
+}
+
+static int __devexit ti_hecc_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	clk_put(priv->clk);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap(priv->base);
+	release_mem_region(res->start, resource_size(res));
+	unregister_candev(ndev);
+	free_candev(ndev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/* TI HECC netdevice driver: platform driver structure */
+static struct platform_driver ti_hecc_driver = {
+	.driver = {
+		.name    = DRV_NAME,
+		.owner   = THIS_MODULE,
+	},
+	.probe = ti_hecc_probe,
+	.remove = __devexit_p(ti_hecc_remove),
+};
+
+static int __init ti_hecc_init_driver(void)
+{
+	printk(KERN_INFO DRV_DESC "\n");
+	return platform_driver_register(&ti_hecc_driver);
+}
+module_init(ti_hecc_init_driver);
+
+static void __exit ti_hecc_exit_driver(void)
+{
+	printk(KERN_INFO DRV_DESC " unloaded\n");
+	platform_driver_unregister(&ti_hecc_driver);
+}
+module_exit(ti_hecc_exit_driver);
+
+MODULE_AUTHOR("Anant Gole <anantgole@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index abdbd9c..591eb0eb 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -232,7 +232,7 @@
 #define INTR_IN_BUFFER_SIZE 4
 
 #define MAX_RX_URBS 10
-#define MAX_TX_URBS CAN_ECHO_SKB_MAX
+#define MAX_TX_URBS 10
 
 struct ems_usb;
 
@@ -311,23 +311,19 @@
 	int i;
 	struct net_device_stats *stats = &dev->netdev->stats;
 
-	skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+	skb = alloc_can_skb(dev->netdev, &cf);
 	if (skb == NULL)
 		return;
 
-	skb->protocol = htons(ETH_P_CAN);
-
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-
 	cf->can_id = le32_to_cpu(msg->msg.can_msg.id);
 	cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
 
-	if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
-	    || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME)
+	if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME ||
+	    msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME)
 		cf->can_id |= CAN_EFF_FLAG;
 
-	if (msg->type == CPC_MSG_TYPE_RTR_FRAME
-	    || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) {
+	if (msg->type == CPC_MSG_TYPE_RTR_FRAME ||
+	    msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) {
 		cf->can_id |= CAN_RTR_FLAG;
 	} else {
 		for (i = 0; i < cf->can_dlc; i++)
@@ -346,18 +342,10 @@
 	struct sk_buff *skb;
 	struct net_device_stats *stats = &dev->netdev->stats;
 
-	skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+	skb = alloc_can_err_skb(dev->netdev, &cf);
 	if (skb == NULL)
 		return;
 
-	skb->protocol = htons(ETH_P_CAN);
-
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
-
-	cf->can_id = CAN_ERR_FLAG;
-	cf->can_dlc = CAN_ERR_DLC;
-
 	if (msg->type == CPC_MSG_TYPE_CAN_STATE) {
 		u8 state = msg->msg.can_state;
 
@@ -1015,7 +1003,7 @@
 	struct ems_usb *dev;
 	int i, err = -ENOMEM;
 
-	netdev = alloc_candev(sizeof(struct ems_usb));
+	netdev = alloc_candev(sizeof(struct ems_usb), MAX_TX_URBS);
 	if (!netdev) {
 		dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
 		return -ENOMEM;
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 3bf1b04..d4c6e7f 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -33,10 +33,16 @@
 #include <net/route.h>
 #include <net/ipv6.h>
 #include <net/ip6_route.h>
+#include <net/ip6_checksum.h>
 #include <scsi/iscsi_if.h>
 
 #include "cnic_if.h"
 #include "bnx2.h"
+#include "bnx2x_reg.h"
+#include "bnx2x_fw_defs.h"
+#include "bnx2x_hsi.h"
+#include "../scsi/bnx2i/57xx_iscsi_constants.h"
+#include "../scsi/bnx2i/57xx_iscsi_hsi.h"
 #include "cnic.h"
 #include "cnic_defs.h"
 
@@ -59,6 +65,7 @@
 static struct cnic_ulp_ops *cnic_ulp_tbl[MAX_CNIC_ULP_TYPE];
 
 static int cnic_service_bnx2(void *, void *);
+static int cnic_service_bnx2x(void *, void *);
 static int cnic_ctl(void *, struct cnic_ctl_info *);
 
 static struct cnic_ops cnic_bnx2_ops = {
@@ -67,9 +74,14 @@
 	.cnic_ctl	= cnic_ctl,
 };
 
-static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *);
-static void cnic_init_bnx2_tx_ring(struct cnic_dev *);
-static void cnic_init_bnx2_rx_ring(struct cnic_dev *);
+static struct cnic_ops cnic_bnx2x_ops = {
+	.cnic_owner	= THIS_MODULE,
+	.cnic_handler	= cnic_service_bnx2x,
+	.cnic_ctl	= cnic_ctl,
+};
+
+static void cnic_shutdown_rings(struct cnic_dev *);
+static void cnic_init_rings(struct cnic_dev *);
 static int cnic_cm_set_pg(struct cnic_sock *);
 
 static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode)
@@ -83,10 +95,16 @@
 	if (cp->uio_dev != -1)
 		return -EBUSY;
 
+	rtnl_lock();
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+		rtnl_unlock();
+		return -ENODEV;
+	}
+
 	cp->uio_dev = iminor(inode);
 
-	cnic_init_bnx2_tx_ring(dev);
-	cnic_init_bnx2_rx_ring(dev);
+	cnic_init_rings(dev);
+	rtnl_unlock();
 
 	return 0;
 }
@@ -96,7 +114,7 @@
 	struct cnic_dev *dev = uinfo->priv;
 	struct cnic_local *cp = dev->cnic_priv;
 
-	cnic_shutdown_bnx2_rx_ring(dev);
+	cnic_shutdown_rings(dev);
 
 	cp->uio_dev = -1;
 	return 0;
@@ -162,6 +180,36 @@
 	ethdev->drv_ctl(dev->netdev, &info);
 }
 
+static void cnic_ctx_tbl_wr(struct cnic_dev *dev, u32 off, dma_addr_t addr)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_CTXTBL_WR_CMD;
+	io->offset = off;
+	io->dma_addr = addr;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static void cnic_ring_ctl(struct cnic_dev *dev, u32 cid, u32 cl_id, int start)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_l2_ring *ring = &info.data.ring;
+
+	if (start)
+		info.cmd = DRV_CTL_START_L2_CMD;
+	else
+		info.cmd = DRV_CTL_STOP_L2_CMD;
+
+	ring->cid = cid;
+	ring->client_id = cl_id;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
 static void cnic_reg_wr_ind(struct cnic_dev *dev, u32 off, u32 val)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -204,6 +252,19 @@
 	ethdev->drv_ctl(dev->netdev, &info);
 }
 
+static int cnic_get_l5_cid(struct cnic_local *cp, u32 cid, u32 *l5_cid)
+{
+	u32 i;
+
+	for (i = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+		if (cp->ctx_tbl[i].cid == cid) {
+			*l5_cid = i;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
 static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
 			   struct cnic_sock *csk)
 {
@@ -347,7 +408,7 @@
 {
 	struct cnic_dev *dev;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -393,7 +454,7 @@
 	struct cnic_ulp_ops *ulp_ops;
 	int i = 0;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -449,7 +510,7 @@
 	struct cnic_local *cp = dev->cnic_priv;
 	struct cnic_ulp_ops *ulp_ops;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -490,7 +551,7 @@
 	struct cnic_local *cp = dev->cnic_priv;
 	int i = 0;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -606,14 +667,14 @@
 
 	for (i = 0; i < dma->num_pages; i++) {
 		if (dma->pg_arr[i]) {
-			pci_free_consistent(dev->pcidev, BCM_PAGE_SIZE,
-					    dma->pg_arr[i], dma->pg_map_arr[i]);
+			dma_free_coherent(&dev->pcidev->dev, BCM_PAGE_SIZE,
+					  dma->pg_arr[i], dma->pg_map_arr[i]);
 			dma->pg_arr[i] = NULL;
 		}
 	}
 	if (dma->pgtbl) {
-		pci_free_consistent(dev->pcidev, dma->pgtbl_size,
-				    dma->pgtbl, dma->pgtbl_map);
+		dma_free_coherent(&dev->pcidev->dev, dma->pgtbl_size,
+				  dma->pgtbl, dma->pgtbl_map);
 		dma->pgtbl = NULL;
 	}
 	kfree(dma->pg_arr);
@@ -635,6 +696,20 @@
 	}
 }
 
+static void cnic_setup_page_tbl_le(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+	u32 *page_table = dma->pgtbl;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		/* Each entry needs to be in little endian format. */
+		*page_table = dma->pg_map_arr[i] & 0xffffffff;
+		page_table++;
+		*page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32);
+		page_table++;
+	}
+}
+
 static int cnic_alloc_dma(struct cnic_dev *dev, struct cnic_dma *dma,
 			  int pages, int use_pg_tbl)
 {
@@ -650,9 +725,10 @@
 	dma->num_pages = pages;
 
 	for (i = 0; i < pages; i++) {
-		dma->pg_arr[i] = pci_alloc_consistent(dev->pcidev,
-						      BCM_PAGE_SIZE,
-						      &dma->pg_map_arr[i]);
+		dma->pg_arr[i] = dma_alloc_coherent(&dev->pcidev->dev,
+						    BCM_PAGE_SIZE,
+						    &dma->pg_map_arr[i],
+						    GFP_ATOMIC);
 		if (dma->pg_arr[i] == NULL)
 			goto error;
 	}
@@ -661,8 +737,8 @@
 
 	dma->pgtbl_size = ((pages * 8) + BCM_PAGE_SIZE - 1) &
 			  ~(BCM_PAGE_SIZE - 1);
-	dma->pgtbl = pci_alloc_consistent(dev->pcidev, dma->pgtbl_size,
-					  &dma->pgtbl_map);
+	dma->pgtbl = dma_alloc_coherent(&dev->pcidev->dev, dma->pgtbl_size,
+					&dma->pgtbl_map, GFP_ATOMIC);
 	if (dma->pgtbl == NULL)
 		goto error;
 
@@ -675,6 +751,21 @@
 	return -ENOMEM;
 }
 
+static void cnic_free_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		if (cp->ctx_arr[i].ctx) {
+			dma_free_coherent(&dev->pcidev->dev, cp->ctx_blk_size,
+					  cp->ctx_arr[i].ctx,
+					  cp->ctx_arr[i].mapping);
+			cp->ctx_arr[i].ctx = NULL;
+		}
+	}
+}
+
 static void cnic_free_resc(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -691,25 +782,18 @@
 	}
 
 	if (cp->l2_buf) {
-		pci_free_consistent(dev->pcidev, cp->l2_buf_size,
-				    cp->l2_buf, cp->l2_buf_map);
+		dma_free_coherent(&dev->pcidev->dev, cp->l2_buf_size,
+				  cp->l2_buf, cp->l2_buf_map);
 		cp->l2_buf = NULL;
 	}
 
 	if (cp->l2_ring) {
-		pci_free_consistent(dev->pcidev, cp->l2_ring_size,
-				    cp->l2_ring, cp->l2_ring_map);
+		dma_free_coherent(&dev->pcidev->dev, cp->l2_ring_size,
+				  cp->l2_ring, cp->l2_ring_map);
 		cp->l2_ring = NULL;
 	}
 
-	for (i = 0; i < cp->ctx_blks; i++) {
-		if (cp->ctx_arr[i].ctx) {
-			pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
-					    cp->ctx_arr[i].ctx,
-					    cp->ctx_arr[i].mapping);
-			cp->ctx_arr[i].ctx = NULL;
-		}
-	}
+	cnic_free_context(dev);
 	kfree(cp->ctx_arr);
 	cp->ctx_arr = NULL;
 	cp->ctx_blks = 0;
@@ -717,6 +801,7 @@
 	cnic_free_dma(dev, &cp->gbl_buf_info);
 	cnic_free_dma(dev, &cp->conn_buf_info);
 	cnic_free_dma(dev, &cp->kwq_info);
+	cnic_free_dma(dev, &cp->kwq_16_data_info);
 	cnic_free_dma(dev, &cp->kcq_info);
 	kfree(cp->iscsi_tbl);
 	cp->iscsi_tbl = NULL;
@@ -765,8 +850,10 @@
 
 		for (i = 0; i < cp->ctx_blks; i++) {
 			cp->ctx_arr[i].ctx =
-				pci_alloc_consistent(dev->pcidev, BCM_PAGE_SIZE,
-						     &cp->ctx_arr[i].mapping);
+				dma_alloc_coherent(&dev->pcidev->dev,
+						   BCM_PAGE_SIZE,
+						   &cp->ctx_arr[i].mapping,
+						   GFP_KERNEL);
 			if (cp->ctx_arr[i].ctx == NULL)
 				return -ENOMEM;
 		}
@@ -779,15 +866,17 @@
 	struct cnic_local *cp = dev->cnic_priv;
 
 	cp->l2_ring_size = pages * BCM_PAGE_SIZE;
-	cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
-					   &cp->l2_ring_map);
+	cp->l2_ring = dma_alloc_coherent(&dev->pcidev->dev, cp->l2_ring_size,
+					 &cp->l2_ring_map,
+					 GFP_KERNEL | __GFP_COMP);
 	if (!cp->l2_ring)
 		return -ENOMEM;
 
 	cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
 	cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
-	cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
-					   &cp->l2_buf_map);
+	cp->l2_buf = dma_alloc_coherent(&dev->pcidev->dev, cp->l2_buf_size,
+					&cp->l2_buf_map,
+					GFP_KERNEL | __GFP_COMP);
 	if (!cp->l2_buf)
 		return -ENOMEM;
 
@@ -808,14 +897,20 @@
 	uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
 	uinfo->mem[0].memtype = UIO_MEM_PHYS;
 
-	uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
 	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
 		if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
 			uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
 		else
 			uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
 
 		uinfo->name = "bnx2_cnic";
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk &
+			PAGE_MASK;
+		uinfo->mem[1].size = sizeof(struct host_def_status_block);
+
+		uinfo->name = "bnx2x_cnic";
 	}
 
 	uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
@@ -880,6 +975,152 @@
 	return ret;
 }
 
+static int cnic_alloc_bnx2x_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int ctx_blk_size = cp->ethdev->ctx_blk_size;
+	int total_mem, blks, i, cid_space;
+
+	if (BNX2X_ISCSI_START_CID < ethdev->starting_cid)
+		return -EINVAL;
+
+	cid_space = MAX_ISCSI_TBL_SZ +
+		    (BNX2X_ISCSI_START_CID - ethdev->starting_cid);
+
+	total_mem = BNX2X_CONTEXT_MEM_SIZE * cid_space;
+	blks = total_mem / ctx_blk_size;
+	if (total_mem % ctx_blk_size)
+		blks++;
+
+	if (blks > cp->ethdev->ctx_tbl_len)
+		return -ENOMEM;
+
+	cp->ctx_arr = kzalloc(blks * sizeof(struct cnic_ctx), GFP_KERNEL);
+	if (cp->ctx_arr == NULL)
+		return -ENOMEM;
+
+	cp->ctx_blks = blks;
+	cp->ctx_blk_size = ctx_blk_size;
+	if (BNX2X_CHIP_IS_E1H(cp->chip_id))
+		cp->ctx_align = 0;
+	else
+		cp->ctx_align = ctx_blk_size;
+
+	cp->cids_per_blk = ctx_blk_size / BNX2X_CONTEXT_MEM_SIZE;
+
+	for (i = 0; i < blks; i++) {
+		cp->ctx_arr[i].ctx =
+			dma_alloc_coherent(&dev->pcidev->dev, cp->ctx_blk_size,
+					   &cp->ctx_arr[i].mapping,
+					   GFP_KERNEL);
+		if (cp->ctx_arr[i].ctx == NULL)
+			return -ENOMEM;
+
+		if (cp->ctx_align && cp->ctx_blk_size == ctx_blk_size) {
+			if (cp->ctx_arr[i].mapping & (cp->ctx_align - 1)) {
+				cnic_free_context(dev);
+				cp->ctx_blk_size += cp->ctx_align;
+				i = -1;
+				continue;
+			}
+		}
+	}
+	return 0;
+}
+
+static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i, j, n, ret, pages;
+	struct cnic_dma *kwq_16_dma = &cp->kwq_16_data_info;
+
+	cp->iscsi_tbl = kzalloc(sizeof(struct cnic_iscsi) * MAX_ISCSI_TBL_SZ,
+				GFP_KERNEL);
+	if (!cp->iscsi_tbl)
+		goto error;
+
+	cp->ctx_tbl = kzalloc(sizeof(struct cnic_context) *
+				  MAX_CNIC_L5_CONTEXT, GFP_KERNEL);
+	if (!cp->ctx_tbl)
+		goto error;
+
+	for (i = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+		cp->ctx_tbl[i].proto.iscsi = &cp->iscsi_tbl[i];
+		cp->ctx_tbl[i].ulp_proto_id = CNIC_ULP_ISCSI;
+	}
+
+	pages = PAGE_ALIGN(MAX_CNIC_L5_CONTEXT * CNIC_KWQ16_DATA_SIZE) /
+		PAGE_SIZE;
+
+	ret = cnic_alloc_dma(dev, kwq_16_dma, pages, 0);
+	if (ret)
+		return -ENOMEM;
+
+	n = PAGE_SIZE / CNIC_KWQ16_DATA_SIZE;
+	for (i = 0, j = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+		long off = CNIC_KWQ16_DATA_SIZE * (i % n);
+
+		cp->ctx_tbl[i].kwqe_data = kwq_16_dma->pg_arr[j] + off;
+		cp->ctx_tbl[i].kwqe_data_mapping = kwq_16_dma->pg_map_arr[j] +
+						   off;
+
+		if ((i % n) == (n - 1))
+			j++;
+	}
+
+	ret = cnic_alloc_dma(dev, &cp->kcq_info, KCQ_PAGE_CNT, 0);
+	if (ret)
+		goto error;
+	cp->kcq = (struct kcqe **) cp->kcq_info.pg_arr;
+
+	for (i = 0; i < KCQ_PAGE_CNT; i++) {
+		struct bnx2x_bd_chain_next *next =
+			(struct bnx2x_bd_chain_next *)
+			&cp->kcq[i][MAX_KCQE_CNT];
+		int j = i + 1;
+
+		if (j >= KCQ_PAGE_CNT)
+			j = 0;
+		next->addr_hi = (u64) cp->kcq_info.pg_map_arr[j] >> 32;
+		next->addr_lo = cp->kcq_info.pg_map_arr[j] & 0xffffffff;
+	}
+
+	pages = PAGE_ALIGN(BNX2X_ISCSI_NUM_CONNECTIONS *
+			   BNX2X_ISCSI_CONN_BUF_SIZE) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &cp->conn_buf_info, pages, 1);
+	if (ret)
+		goto error;
+
+	pages = PAGE_ALIGN(BNX2X_ISCSI_GLB_BUF_SIZE) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &cp->gbl_buf_info, pages, 0);
+	if (ret)
+		goto error;
+
+	ret = cnic_alloc_bnx2x_context(dev);
+	if (ret)
+		goto error;
+
+	cp->bnx2x_status_blk = cp->status_blk;
+	cp->bnx2x_def_status_blk = cp->ethdev->irq_arr[1].status_blk;
+
+	cp->l2_rx_ring_size = 15;
+
+	ret = cnic_alloc_l2_rings(dev, 4);
+	if (ret)
+		goto error;
+
+	ret = cnic_alloc_uio(dev);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	cnic_free_resc(dev);
+	return -ENOMEM;
+}
+
 static inline u32 cnic_kwq_avail(struct cnic_local *cp)
 {
 	return cp->max_kwq_idx -
@@ -921,6 +1162,880 @@
 	return 0;
 }
 
+static void *cnic_get_kwqe_16_data(struct cnic_local *cp, u32 l5_cid,
+				   union l5cm_specific_data *l5_data)
+{
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	dma_addr_t map;
+
+	map = ctx->kwqe_data_mapping;
+	l5_data->phy_address.lo = (u64) map & 0xffffffff;
+	l5_data->phy_address.hi = (u64) map >> 32;
+	return ctx->kwqe_data;
+}
+
+static int cnic_submit_kwqe_16(struct cnic_dev *dev, u32 cmd, u32 cid,
+				u32 type, union l5cm_specific_data *l5_data)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l5cm_spe kwqe;
+	struct kwqe_16 *kwq[1];
+	int ret;
+
+	kwqe.hdr.conn_and_cmd_data =
+		cpu_to_le32(((cmd << SPE_HDR_CMD_ID_SHIFT) |
+			     BNX2X_HW_CID(cid, cp->func)));
+	kwqe.hdr.type = cpu_to_le16(type);
+	kwqe.hdr.reserved = 0;
+	kwqe.data.phy_address.lo = cpu_to_le32(l5_data->phy_address.lo);
+	kwqe.data.phy_address.hi = cpu_to_le32(l5_data->phy_address.hi);
+
+	kwq[0] = (struct kwqe_16 *) &kwqe;
+
+	spin_lock_bh(&cp->cnic_ulp_lock);
+	ret = cp->ethdev->drv_submit_kwqes_16(dev->netdev, kwq, 1);
+	spin_unlock_bh(&cp->cnic_ulp_lock);
+
+	if (ret == 1)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void cnic_reply_bnx2x_kcqes(struct cnic_dev *dev, int ulp_type,
+				   struct kcqe *cqes[], u32 num_cqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_ulp_ops *ulp_ops;
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+	if (likely(ulp_ops)) {
+		ulp_ops->indicate_kcqes(cp->ulp_handle[ulp_type],
+					  cqes, num_cqes);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_bnx2x_iscsi_init1(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_init1 *req1 = (struct iscsi_kwqe_init1 *) kwqe;
+	int func = cp->func, pages;
+	int hq_bds;
+
+	cp->num_iscsi_tasks = req1->num_tasks_per_conn;
+	cp->num_ccells = req1->num_ccells_per_conn;
+	cp->task_array_size = BNX2X_ISCSI_TASK_CONTEXT_SIZE *
+			      cp->num_iscsi_tasks;
+	cp->r2tq_size = cp->num_iscsi_tasks * BNX2X_ISCSI_MAX_PENDING_R2TS *
+			BNX2X_ISCSI_R2TQE_SIZE;
+	cp->hq_size = cp->num_ccells * BNX2X_ISCSI_HQ_BD_SIZE;
+	pages = PAGE_ALIGN(cp->hq_size) / PAGE_SIZE;
+	hq_bds = pages * (PAGE_SIZE / BNX2X_ISCSI_HQ_BD_SIZE);
+	cp->num_cqs = req1->num_cqs;
+
+	if (!dev->max_iscsi_conn)
+		return 0;
+
+	/* init Tstorm RAM */
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM + TSTORM_ISCSI_RQ_SIZE_OFFSET(func),
+		  req1->rq_num_wqes);
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM + TSTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM +
+		  TSTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+
+	/* init Ustorm RAM */
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM +
+		  USTORM_ISCSI_RQ_BUFFER_SIZE_OFFSET(func),
+		  req1->rq_buffer_size);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_USTRORM_INTMEM +
+		 USTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM +
+		  USTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_RQ_SIZE_OFFSET(func),
+		  req1->rq_num_wqes);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_CQ_SIZE_OFFSET(func),
+		  req1->cq_num_wqes);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_R2TQ_SIZE_OFFSET(func),
+		  cp->num_iscsi_tasks * BNX2X_ISCSI_MAX_PENDING_R2TS);
+
+	/* init Xstorm RAM */
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM +
+		  XSTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_HQ_SIZE_OFFSET(func),
+		  hq_bds);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_SQ_SIZE_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_R2TQ_SIZE_OFFSET(func),
+		  cp->num_iscsi_tasks * BNX2X_ISCSI_MAX_PENDING_R2TS);
+
+	/* init Cstorm RAM */
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		 CSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_ISCSI_CQ_SIZE_OFFSET(func),
+		  req1->cq_num_wqes);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_ISCSI_HQ_SIZE_OFFSET(func),
+		  hq_bds);
+
+	return 0;
+}
+
+static int cnic_bnx2x_iscsi_init2(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct iscsi_kwqe_init2 *req2 = (struct iscsi_kwqe_init2 *) kwqe;
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = cp->func;
+	struct iscsi_kcqe kcqe;
+	struct kcqe *cqes[1];
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	if (!dev->max_iscsi_conn) {
+		kcqe.completion_status =
+			ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED;
+		goto done;
+	}
+
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		TSTORM_ISCSI_ERROR_BITMAP_OFFSET(func), req2->error_bit_map[0]);
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		TSTORM_ISCSI_ERROR_BITMAP_OFFSET(func) + 4,
+		req2->error_bit_map[1]);
+
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM +
+		  USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(func), req2->max_cq_sqn);
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_ERROR_BITMAP_OFFSET(func), req2->error_bit_map[0]);
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_ERROR_BITMAP_OFFSET(func) + 4,
+		req2->error_bit_map[1]);
+
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(func), req2->max_cq_sqn);
+
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_SUCCESS;
+
+done:
+	kcqe.op_code = ISCSI_KCQE_OPCODE_INIT;
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1);
+
+	return 0;
+}
+
+static void cnic_free_bnx2x_conn_resc(struct cnic_dev *dev, u32 l5_cid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+
+	if (ctx->ulp_proto_id == CNIC_ULP_ISCSI) {
+		struct cnic_iscsi *iscsi = ctx->proto.iscsi;
+
+		cnic_free_dma(dev, &iscsi->hq_info);
+		cnic_free_dma(dev, &iscsi->r2tq_info);
+		cnic_free_dma(dev, &iscsi->task_array_info);
+	}
+	cnic_free_id(&cp->cid_tbl, ctx->cid);
+	ctx->cid = 0;
+}
+
+static int cnic_alloc_bnx2x_conn_resc(struct cnic_dev *dev, u32 l5_cid)
+{
+	u32 cid;
+	int ret, pages;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	struct cnic_iscsi *iscsi = ctx->proto.iscsi;
+
+	cid = cnic_alloc_new_id(&cp->cid_tbl);
+	if (cid == -1) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	ctx->cid = cid;
+	pages = PAGE_ALIGN(cp->task_array_size) / PAGE_SIZE;
+
+	ret = cnic_alloc_dma(dev, &iscsi->task_array_info, pages, 1);
+	if (ret)
+		goto error;
+
+	pages = PAGE_ALIGN(cp->r2tq_size) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &iscsi->r2tq_info, pages, 1);
+	if (ret)
+		goto error;
+
+	pages = PAGE_ALIGN(cp->hq_size) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &iscsi->hq_info, pages, 1);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	cnic_free_bnx2x_conn_resc(dev, l5_cid);
+	return ret;
+}
+
+static void *cnic_get_bnx2x_ctx(struct cnic_dev *dev, u32 cid, int init,
+				struct regpair *ctx_addr)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int blk = (cid - ethdev->starting_cid) / cp->cids_per_blk;
+	int off = (cid - ethdev->starting_cid) % cp->cids_per_blk;
+	unsigned long align_off = 0;
+	dma_addr_t ctx_map;
+	void *ctx;
+
+	if (cp->ctx_align) {
+		unsigned long mask = cp->ctx_align - 1;
+
+		if (cp->ctx_arr[blk].mapping & mask)
+			align_off = cp->ctx_align -
+				    (cp->ctx_arr[blk].mapping & mask);
+	}
+	ctx_map = cp->ctx_arr[blk].mapping + align_off +
+		(off * BNX2X_CONTEXT_MEM_SIZE);
+	ctx = cp->ctx_arr[blk].ctx + align_off +
+	      (off * BNX2X_CONTEXT_MEM_SIZE);
+	if (init)
+		memset(ctx, 0, BNX2X_CONTEXT_MEM_SIZE);
+
+	ctx_addr->lo = ctx_map & 0xffffffff;
+	ctx_addr->hi = (u64) ctx_map >> 32;
+	return ctx;
+}
+
+static int cnic_setup_bnx2x_ctx(struct cnic_dev *dev, struct kwqe *wqes[],
+				u32 num)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_conn_offload1 *req1 =
+			(struct iscsi_kwqe_conn_offload1 *) wqes[0];
+	struct iscsi_kwqe_conn_offload2 *req2 =
+			(struct iscsi_kwqe_conn_offload2 *) wqes[1];
+	struct iscsi_kwqe_conn_offload3 *req3;
+	struct cnic_context *ctx = &cp->ctx_tbl[req1->iscsi_conn_id];
+	struct cnic_iscsi *iscsi = ctx->proto.iscsi;
+	u32 cid = ctx->cid;
+	u32 hw_cid = BNX2X_HW_CID(cid, cp->func);
+	struct iscsi_context *ictx;
+	struct regpair context_addr;
+	int i, j, n = 2, n_max;
+
+	ctx->ctx_flags = 0;
+	if (!req2->num_additional_wqes)
+		return -EINVAL;
+
+	n_max = req2->num_additional_wqes + 2;
+
+	ictx = cnic_get_bnx2x_ctx(dev, cid, 1, &context_addr);
+	if (ictx == NULL)
+		return -ENOMEM;
+
+	req3 = (struct iscsi_kwqe_conn_offload3 *) wqes[n++];
+
+	ictx->xstorm_ag_context.hq_prod = 1;
+
+	ictx->xstorm_st_context.iscsi.first_burst_length =
+		ISCSI_DEF_FIRST_BURST_LEN;
+	ictx->xstorm_st_context.iscsi.max_send_pdu_length =
+		ISCSI_DEF_MAX_RECV_SEG_LEN;
+	ictx->xstorm_st_context.iscsi.sq_pbl_base.lo =
+		req1->sq_page_table_addr_lo;
+	ictx->xstorm_st_context.iscsi.sq_pbl_base.hi =
+		req1->sq_page_table_addr_hi;
+	ictx->xstorm_st_context.iscsi.sq_curr_pbe.lo = req2->sq_first_pte.hi;
+	ictx->xstorm_st_context.iscsi.sq_curr_pbe.hi = req2->sq_first_pte.lo;
+	ictx->xstorm_st_context.iscsi.hq_pbl_base.lo =
+		iscsi->hq_info.pgtbl_map & 0xffffffff;
+	ictx->xstorm_st_context.iscsi.hq_pbl_base.hi =
+		(u64) iscsi->hq_info.pgtbl_map >> 32;
+	ictx->xstorm_st_context.iscsi.hq_curr_pbe_base.lo =
+		iscsi->hq_info.pgtbl[0];
+	ictx->xstorm_st_context.iscsi.hq_curr_pbe_base.hi =
+		iscsi->hq_info.pgtbl[1];
+	ictx->xstorm_st_context.iscsi.r2tq_pbl_base.lo =
+		iscsi->r2tq_info.pgtbl_map & 0xffffffff;
+	ictx->xstorm_st_context.iscsi.r2tq_pbl_base.hi =
+		(u64) iscsi->r2tq_info.pgtbl_map >> 32;
+	ictx->xstorm_st_context.iscsi.r2tq_curr_pbe_base.lo =
+		iscsi->r2tq_info.pgtbl[0];
+	ictx->xstorm_st_context.iscsi.r2tq_curr_pbe_base.hi =
+		iscsi->r2tq_info.pgtbl[1];
+	ictx->xstorm_st_context.iscsi.task_pbl_base.lo =
+		iscsi->task_array_info.pgtbl_map & 0xffffffff;
+	ictx->xstorm_st_context.iscsi.task_pbl_base.hi =
+		(u64) iscsi->task_array_info.pgtbl_map >> 32;
+	ictx->xstorm_st_context.iscsi.task_pbl_cache_idx =
+		BNX2X_ISCSI_PBL_NOT_CACHED;
+	ictx->xstorm_st_context.iscsi.flags.flags |=
+		XSTORM_ISCSI_CONTEXT_FLAGS_B_IMMEDIATE_DATA;
+	ictx->xstorm_st_context.iscsi.flags.flags |=
+		XSTORM_ISCSI_CONTEXT_FLAGS_B_INITIAL_R2T;
+
+	ictx->tstorm_st_context.iscsi.hdr_bytes_2_fetch = ISCSI_HEADER_SIZE;
+	/* TSTORM requires the base address of RQ DB & not PTE */
+	ictx->tstorm_st_context.iscsi.rq_db_phy_addr.lo =
+		req2->rq_page_table_addr_lo & PAGE_MASK;
+	ictx->tstorm_st_context.iscsi.rq_db_phy_addr.hi =
+		req2->rq_page_table_addr_hi;
+	ictx->tstorm_st_context.iscsi.iscsi_conn_id = req1->iscsi_conn_id;
+	ictx->tstorm_st_context.tcp.cwnd = 0x5A8;
+	ictx->tstorm_st_context.tcp.flags2 |=
+		TSTORM_TCP_ST_CONTEXT_SECTION_DA_EN;
+
+	ictx->timers_context.flags |= ISCSI_TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG;
+
+	ictx->ustorm_st_context.ring.rq.pbl_base.lo =
+		req2->rq_page_table_addr_lo;
+	ictx->ustorm_st_context.ring.rq.pbl_base.hi =
+		req2->rq_page_table_addr_hi;
+	ictx->ustorm_st_context.ring.rq.curr_pbe.lo = req3->qp_first_pte[0].hi;
+	ictx->ustorm_st_context.ring.rq.curr_pbe.hi = req3->qp_first_pte[0].lo;
+	ictx->ustorm_st_context.ring.r2tq.pbl_base.lo =
+		iscsi->r2tq_info.pgtbl_map & 0xffffffff;
+	ictx->ustorm_st_context.ring.r2tq.pbl_base.hi =
+		(u64) iscsi->r2tq_info.pgtbl_map >> 32;
+	ictx->ustorm_st_context.ring.r2tq.curr_pbe.lo =
+		iscsi->r2tq_info.pgtbl[0];
+	ictx->ustorm_st_context.ring.r2tq.curr_pbe.hi =
+		iscsi->r2tq_info.pgtbl[1];
+	ictx->ustorm_st_context.ring.cq_pbl_base.lo =
+		req1->cq_page_table_addr_lo;
+	ictx->ustorm_st_context.ring.cq_pbl_base.hi =
+		req1->cq_page_table_addr_hi;
+	ictx->ustorm_st_context.ring.cq[0].cq_sn = ISCSI_INITIAL_SN;
+	ictx->ustorm_st_context.ring.cq[0].curr_pbe.lo = req2->cq_first_pte.hi;
+	ictx->ustorm_st_context.ring.cq[0].curr_pbe.hi = req2->cq_first_pte.lo;
+	ictx->ustorm_st_context.task_pbe_cache_index =
+		BNX2X_ISCSI_PBL_NOT_CACHED;
+	ictx->ustorm_st_context.task_pdu_cache_index =
+		BNX2X_ISCSI_PDU_HEADER_NOT_CACHED;
+
+	for (i = 1, j = 1; i < cp->num_cqs; i++, j++) {
+		if (j == 3) {
+			if (n >= n_max)
+				break;
+			req3 = (struct iscsi_kwqe_conn_offload3 *) wqes[n++];
+			j = 0;
+		}
+		ictx->ustorm_st_context.ring.cq[i].cq_sn = ISCSI_INITIAL_SN;
+		ictx->ustorm_st_context.ring.cq[i].curr_pbe.lo =
+			req3->qp_first_pte[j].hi;
+		ictx->ustorm_st_context.ring.cq[i].curr_pbe.hi =
+			req3->qp_first_pte[j].lo;
+	}
+
+	ictx->ustorm_st_context.task_pbl_base.lo =
+		iscsi->task_array_info.pgtbl_map & 0xffffffff;
+	ictx->ustorm_st_context.task_pbl_base.hi =
+		(u64) iscsi->task_array_info.pgtbl_map >> 32;
+	ictx->ustorm_st_context.tce_phy_addr.lo =
+		iscsi->task_array_info.pgtbl[0];
+	ictx->ustorm_st_context.tce_phy_addr.hi =
+		iscsi->task_array_info.pgtbl[1];
+	ictx->ustorm_st_context.iscsi_conn_id = req1->iscsi_conn_id;
+	ictx->ustorm_st_context.num_cqs = cp->num_cqs;
+	ictx->ustorm_st_context.negotiated_rx |= ISCSI_DEF_MAX_RECV_SEG_LEN;
+	ictx->ustorm_st_context.negotiated_rx_and_flags |=
+		ISCSI_DEF_MAX_BURST_LEN;
+	ictx->ustorm_st_context.negotiated_rx |=
+		ISCSI_DEFAULT_MAX_OUTSTANDING_R2T <<
+		USTORM_ISCSI_ST_CONTEXT_MAX_OUTSTANDING_R2TS_SHIFT;
+
+	ictx->cstorm_st_context.hq_pbl_base.lo =
+		iscsi->hq_info.pgtbl_map & 0xffffffff;
+	ictx->cstorm_st_context.hq_pbl_base.hi =
+		(u64) iscsi->hq_info.pgtbl_map >> 32;
+	ictx->cstorm_st_context.hq_curr_pbe.lo = iscsi->hq_info.pgtbl[0];
+	ictx->cstorm_st_context.hq_curr_pbe.hi = iscsi->hq_info.pgtbl[1];
+	ictx->cstorm_st_context.task_pbl_base.lo =
+		iscsi->task_array_info.pgtbl_map & 0xffffffff;
+	ictx->cstorm_st_context.task_pbl_base.hi =
+		(u64) iscsi->task_array_info.pgtbl_map >> 32;
+	/* CSTORM and USTORM initialization is different, CSTORM requires
+	 * CQ DB base & not PTE addr */
+	ictx->cstorm_st_context.cq_db_base.lo =
+		req1->cq_page_table_addr_lo & PAGE_MASK;
+	ictx->cstorm_st_context.cq_db_base.hi = req1->cq_page_table_addr_hi;
+	ictx->cstorm_st_context.iscsi_conn_id = req1->iscsi_conn_id;
+	ictx->cstorm_st_context.cq_proc_en_bit_map = (1 << cp->num_cqs) - 1;
+	for (i = 0; i < cp->num_cqs; i++) {
+		ictx->cstorm_st_context.cq_c_prod_sqn_arr.sqn[i] =
+			ISCSI_INITIAL_SN;
+		ictx->cstorm_st_context.cq_c_sqn_2_notify_arr.sqn[i] =
+			ISCSI_INITIAL_SN;
+	}
+
+	ictx->xstorm_ag_context.cdu_reserved =
+		CDU_RSRVD_VALUE_TYPE_A(hw_cid, CDU_REGION_NUMBER_XCM_AG,
+				       ISCSI_CONNECTION_TYPE);
+	ictx->ustorm_ag_context.cdu_usage =
+		CDU_RSRVD_VALUE_TYPE_A(hw_cid, CDU_REGION_NUMBER_UCM_AG,
+				       ISCSI_CONNECTION_TYPE);
+	return 0;
+
+}
+
+static int cnic_bnx2x_iscsi_ofld1(struct cnic_dev *dev, struct kwqe *wqes[],
+				   u32 num, int *work)
+{
+	struct iscsi_kwqe_conn_offload1 *req1;
+	struct iscsi_kwqe_conn_offload2 *req2;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kcqe kcqe;
+	struct kcqe *cqes[1];
+	u32 l5_cid;
+	int ret;
+
+	if (num < 2) {
+		*work = num;
+		return -EINVAL;
+	}
+
+	req1 = (struct iscsi_kwqe_conn_offload1 *) wqes[0];
+	req2 = (struct iscsi_kwqe_conn_offload2 *) wqes[1];
+	if ((num - 2) < req2->num_additional_wqes) {
+		*work = num;
+		return -EINVAL;
+	}
+	*work = 2 + req2->num_additional_wqes;;
+
+	l5_cid = req1->iscsi_conn_id;
+	if (l5_cid >= MAX_ISCSI_TBL_SZ)
+		return -EINVAL;
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.op_code = ISCSI_KCQE_OPCODE_OFFLOAD_CONN;
+	kcqe.iscsi_conn_id = l5_cid;
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE;
+
+	if (atomic_inc_return(&cp->iscsi_conn) > dev->max_iscsi_conn) {
+		atomic_dec(&cp->iscsi_conn);
+		ret = 0;
+		goto done;
+	}
+	ret = cnic_alloc_bnx2x_conn_resc(dev, l5_cid);
+	if (ret) {
+		atomic_dec(&cp->iscsi_conn);
+		ret = 0;
+		goto done;
+	}
+	ret = cnic_setup_bnx2x_ctx(dev, wqes, num);
+	if (ret < 0) {
+		cnic_free_bnx2x_conn_resc(dev, l5_cid);
+		atomic_dec(&cp->iscsi_conn);
+		goto done;
+	}
+
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_SUCCESS;
+	kcqe.iscsi_conn_context_id = BNX2X_HW_CID(cp->ctx_tbl[l5_cid].cid,
+						  cp->func);
+
+done:
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1);
+	return ret;
+}
+
+
+static int cnic_bnx2x_iscsi_update(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_conn_update *req =
+		(struct iscsi_kwqe_conn_update *) kwqe;
+	void *data;
+	union l5cm_specific_data l5_data;
+	u32 l5_cid, cid = BNX2X_SW_CID(req->context_id);
+	int ret;
+
+	if (cnic_get_l5_cid(cp, cid, &l5_cid) != 0)
+		return -EINVAL;
+
+	data = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(data, kwqe, sizeof(struct kwqe));
+
+	ret = cnic_submit_kwqe_16(dev, ISCSI_RAMROD_CMD_ID_UPDATE_CONN,
+			req->context_id, ISCSI_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_iscsi_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_conn_destroy *req =
+		(struct iscsi_kwqe_conn_destroy *) kwqe;
+	union l5cm_specific_data l5_data;
+	u32 l5_cid = req->reserved0;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	int ret = 0;
+	struct iscsi_kcqe kcqe;
+	struct kcqe *cqes[1];
+
+	if (!(ctx->ctx_flags & CTX_FL_OFFLD_START))
+		goto skip_cfc_delete;
+
+	while (!time_after(jiffies, ctx->timestamp + (2 * HZ)))
+		msleep(250);
+
+	init_waitqueue_head(&ctx->waitq);
+	ctx->wait_cond = 0;
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_CFC_DEL,
+				  req->context_id,
+				  ETH_CONNECTION_TYPE |
+				  (1 << SPE_HDR_COMMON_RAMROD_SHIFT),
+				  &l5_data);
+	if (ret == 0)
+		wait_event(ctx->waitq, ctx->wait_cond);
+
+skip_cfc_delete:
+	cnic_free_bnx2x_conn_resc(dev, l5_cid);
+
+	atomic_dec(&cp->iscsi_conn);
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.op_code = ISCSI_KCQE_OPCODE_DESTROY_CONN;
+	kcqe.iscsi_conn_id = l5_cid;
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_SUCCESS;
+	kcqe.iscsi_conn_context_id = req->context_id;
+
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1);
+
+	return ret;
+}
+
+static void cnic_init_storm_conn_bufs(struct cnic_dev *dev,
+				      struct l4_kwq_connect_req1 *kwqe1,
+				      struct l4_kwq_connect_req3 *kwqe3,
+				      struct l5cm_active_conn_buffer *conn_buf)
+{
+	struct l5cm_conn_addr_params *conn_addr = &conn_buf->conn_addr_buf;
+	struct l5cm_xstorm_conn_buffer *xstorm_buf =
+		&conn_buf->xstorm_conn_buffer;
+	struct l5cm_tstorm_conn_buffer *tstorm_buf =
+		&conn_buf->tstorm_conn_buffer;
+	struct regpair context_addr;
+	u32 cid = BNX2X_SW_CID(kwqe1->cid);
+	struct in6_addr src_ip, dst_ip;
+	int i;
+	u32 *addrp;
+
+	addrp = (u32 *) &conn_addr->local_ip_addr;
+	for (i = 0; i < 4; i++, addrp++)
+		src_ip.in6_u.u6_addr32[i] = cpu_to_be32(*addrp);
+
+	addrp = (u32 *) &conn_addr->remote_ip_addr;
+	for (i = 0; i < 4; i++, addrp++)
+		dst_ip.in6_u.u6_addr32[i] = cpu_to_be32(*addrp);
+
+	cnic_get_bnx2x_ctx(dev, cid, 0, &context_addr);
+
+	xstorm_buf->context_addr.hi = context_addr.hi;
+	xstorm_buf->context_addr.lo = context_addr.lo;
+	xstorm_buf->mss = 0xffff;
+	xstorm_buf->rcv_buf = kwqe3->rcv_buf;
+	if (kwqe1->tcp_flags & L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE)
+		xstorm_buf->params |= L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE;
+	xstorm_buf->pseudo_header_checksum =
+		swab16(~csum_ipv6_magic(&src_ip, &dst_ip, 0, IPPROTO_TCP, 0));
+
+	if (!(kwqe1->tcp_flags & L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK))
+		tstorm_buf->params |=
+			L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE;
+	if (kwqe3->ka_timeout) {
+		tstorm_buf->ka_enable = 1;
+		tstorm_buf->ka_timeout = kwqe3->ka_timeout;
+		tstorm_buf->ka_interval = kwqe3->ka_interval;
+		tstorm_buf->ka_max_probe_count = kwqe3->ka_max_probe_count;
+	}
+	tstorm_buf->rcv_buf = kwqe3->rcv_buf;
+	tstorm_buf->snd_buf = kwqe3->snd_buf;
+	tstorm_buf->max_rt_time = 0xffffffff;
+}
+
+static void cnic_init_bnx2x_mac(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = CNIC_FUNC(cp);
+	u8 *mac = dev->mac_addr;
+
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR0_OFFSET(func), mac[0]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(func), mac[1]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(func), mac[2]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(func), mac[3]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(func), mac[4]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(func), mac[5]);
+
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(func), mac[5]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(func) + 1,
+		 mac[4]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func), mac[3]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func) + 1,
+		 mac[2]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func) + 2,
+		 mac[1]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func) + 3,
+		 mac[0]);
+}
+
+static void cnic_bnx2x_set_tcp_timestamp(struct cnic_dev *dev, int tcp_ts)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u8 xstorm_flags = XSTORM_L5CM_TCP_FLAGS_WND_SCL_EN;
+	u16 tstorm_flags = 0;
+
+	if (tcp_ts) {
+		xstorm_flags |= XSTORM_L5CM_TCP_FLAGS_TS_ENABLED;
+		tstorm_flags |= TSTORM_L5CM_TCP_FLAGS_TS_ENABLED;
+	}
+
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(cp->func), xstorm_flags);
+
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM +
+		  TSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(cp->func), tstorm_flags);
+}
+
+static int cnic_bnx2x_connect(struct cnic_dev *dev, struct kwqe *wqes[],
+			      u32 num, int *work)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l4_kwq_connect_req1 *kwqe1 =
+		(struct l4_kwq_connect_req1 *) wqes[0];
+	struct l4_kwq_connect_req3 *kwqe3;
+	struct l5cm_active_conn_buffer *conn_buf;
+	struct l5cm_conn_addr_params *conn_addr;
+	union l5cm_specific_data l5_data;
+	u32 l5_cid = kwqe1->pg_cid;
+	struct cnic_sock *csk = &cp->csk_tbl[l5_cid];
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	int ret;
+
+	if (num < 2) {
+		*work = num;
+		return -EINVAL;
+	}
+
+	if (kwqe1->conn_flags & L4_KWQ_CONNECT_REQ1_IP_V6)
+		*work = 3;
+	else
+		*work = 2;
+
+	if (num < *work) {
+		*work = num;
+		return -EINVAL;
+	}
+
+	if (sizeof(*conn_buf) > CNIC_KWQ16_DATA_SIZE) {
+		printk(KERN_ERR PFX "%s: conn_buf size too big\n",
+			       dev->netdev->name);
+		return -ENOMEM;
+	}
+	conn_buf = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!conn_buf)
+		return -ENOMEM;
+
+	memset(conn_buf, 0, sizeof(*conn_buf));
+
+	conn_addr = &conn_buf->conn_addr_buf;
+	conn_addr->remote_addr_0 = csk->ha[0];
+	conn_addr->remote_addr_1 = csk->ha[1];
+	conn_addr->remote_addr_2 = csk->ha[2];
+	conn_addr->remote_addr_3 = csk->ha[3];
+	conn_addr->remote_addr_4 = csk->ha[4];
+	conn_addr->remote_addr_5 = csk->ha[5];
+
+	if (kwqe1->conn_flags & L4_KWQ_CONNECT_REQ1_IP_V6) {
+		struct l4_kwq_connect_req2 *kwqe2 =
+			(struct l4_kwq_connect_req2 *) wqes[1];
+
+		conn_addr->local_ip_addr.ip_addr_hi_hi = kwqe2->src_ip_v6_4;
+		conn_addr->local_ip_addr.ip_addr_hi_lo = kwqe2->src_ip_v6_3;
+		conn_addr->local_ip_addr.ip_addr_lo_hi = kwqe2->src_ip_v6_2;
+
+		conn_addr->remote_ip_addr.ip_addr_hi_hi = kwqe2->dst_ip_v6_4;
+		conn_addr->remote_ip_addr.ip_addr_hi_lo = kwqe2->dst_ip_v6_3;
+		conn_addr->remote_ip_addr.ip_addr_lo_hi = kwqe2->dst_ip_v6_2;
+		conn_addr->params |= L5CM_CONN_ADDR_PARAMS_IP_VERSION;
+	}
+	kwqe3 = (struct l4_kwq_connect_req3 *) wqes[*work - 1];
+
+	conn_addr->local_ip_addr.ip_addr_lo_lo = kwqe1->src_ip;
+	conn_addr->remote_ip_addr.ip_addr_lo_lo = kwqe1->dst_ip;
+	conn_addr->local_tcp_port = kwqe1->src_port;
+	conn_addr->remote_tcp_port = kwqe1->dst_port;
+
+	conn_addr->pmtu = kwqe3->pmtu;
+	cnic_init_storm_conn_bufs(dev, kwqe1, kwqe3, conn_buf);
+
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM +
+		  XSTORM_ISCSI_LOCAL_VLAN_OFFSET(cp->func), csk->vlan_id);
+
+	cnic_bnx2x_set_tcp_timestamp(dev,
+		kwqe1->tcp_flags & L4_KWQ_CONNECT_REQ1_TIME_STAMP);
+
+	ret = cnic_submit_kwqe_16(dev, L5CM_RAMROD_CMD_ID_TCP_CONNECT,
+			kwqe1->cid, ISCSI_CONNECTION_TYPE, &l5_data);
+	if (!ret)
+		ctx->ctx_flags |= CTX_FL_OFFLD_START;
+
+	return ret;
+}
+
+static int cnic_bnx2x_close(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_close_req *req = (struct l4_kwq_close_req *) kwqe;
+	union l5cm_specific_data l5_data;
+	int ret;
+
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, L5CM_RAMROD_CMD_ID_CLOSE,
+			req->cid, ISCSI_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_reset(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_reset_req *req = (struct l4_kwq_reset_req *) kwqe;
+	union l5cm_specific_data l5_data;
+	int ret;
+
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, L5CM_RAMROD_CMD_ID_ABORT,
+			req->cid, ISCSI_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+static int cnic_bnx2x_offload_pg(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_offload_pg *req = (struct l4_kwq_offload_pg *) kwqe;
+	struct l4_kcq kcqe;
+	struct kcqe *cqes[1];
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.pg_host_opaque = req->host_opaque;
+	kcqe.pg_cid = req->host_opaque;
+	kcqe.op_code = L4_KCQE_OPCODE_VALUE_OFFLOAD_PG;
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_L4, cqes, 1);
+	return 0;
+}
+
+static int cnic_bnx2x_update_pg(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_update_pg *req = (struct l4_kwq_update_pg *) kwqe;
+	struct l4_kcq kcqe;
+	struct kcqe *cqes[1];
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.pg_host_opaque = req->pg_host_opaque;
+	kcqe.pg_cid = req->pg_cid;
+	kcqe.op_code = L4_KCQE_OPCODE_VALUE_UPDATE_PG;
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_L4, cqes, 1);
+	return 0;
+}
+
+static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+				   u32 num_wqes)
+{
+	int i, work, ret;
+	u32 opcode;
+	struct kwqe *kwqe;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2 is down */
+
+	for (i = 0; i < num_wqes; ) {
+		kwqe = wqes[i];
+		opcode = KWQE_OPCODE(kwqe->kwqe_op_flag);
+		work = 1;
+
+		switch (opcode) {
+		case ISCSI_KWQE_OPCODE_INIT1:
+			ret = cnic_bnx2x_iscsi_init1(dev, kwqe);
+			break;
+		case ISCSI_KWQE_OPCODE_INIT2:
+			ret = cnic_bnx2x_iscsi_init2(dev, kwqe);
+			break;
+		case ISCSI_KWQE_OPCODE_OFFLOAD_CONN1:
+			ret = cnic_bnx2x_iscsi_ofld1(dev, &wqes[i],
+						     num_wqes - i, &work);
+			break;
+		case ISCSI_KWQE_OPCODE_UPDATE_CONN:
+			ret = cnic_bnx2x_iscsi_update(dev, kwqe);
+			break;
+		case ISCSI_KWQE_OPCODE_DESTROY_CONN:
+			ret = cnic_bnx2x_iscsi_destroy(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_CONNECT1:
+			ret = cnic_bnx2x_connect(dev, &wqes[i], num_wqes - i,
+						 &work);
+			break;
+		case L4_KWQE_OPCODE_VALUE_CLOSE:
+			ret = cnic_bnx2x_close(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_RESET:
+			ret = cnic_bnx2x_reset(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_OFFLOAD_PG:
+			ret = cnic_bnx2x_offload_pg(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_UPDATE_PG:
+			ret = cnic_bnx2x_update_pg(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_UPLOAD_PG:
+			ret = 0;
+			break;
+		default:
+			ret = 0;
+			printk(KERN_ERR PFX "%s: Unknown type of KWQE(0x%x)\n",
+			       dev->netdev->name, opcode);
+			break;
+		}
+		if (ret < 0)
+			printk(KERN_ERR PFX "%s: KWQE(0x%x) failed\n",
+			       dev->netdev->name, opcode);
+		i += work;
+	}
+	return 0;
+}
+
 static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -987,6 +2102,22 @@
 	return idx;
 }
 
+static u16 cnic_bnx2x_next_idx(u16 idx)
+{
+	idx++;
+	if ((idx & MAX_KCQE_CNT) == MAX_KCQE_CNT)
+		idx++;
+
+	return idx;
+}
+
+static u16 cnic_bnx2x_hw_idx(u16 idx)
+{
+	if ((idx & MAX_KCQE_CNT) == MAX_KCQE_CNT)
+		idx++;
+	return idx;
+}
+
 static int cnic_get_kcqes(struct cnic_dev *dev, u16 hw_prod, u16 *sw_prod)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -1012,7 +2143,7 @@
 	return last_cnt;
 }
 
-static void cnic_chk_bnx2_pkt_rings(struct cnic_local *cp)
+static void cnic_chk_pkt_rings(struct cnic_local *cp)
 {
 	u16 rx_cons = *cp->rx_cons_ptr;
 	u16 tx_cons = *cp->tx_cons_ptr;
@@ -1020,6 +2151,7 @@
 	if (cp->tx_cons != tx_cons || cp->rx_cons != rx_cons) {
 		cp->tx_cons = tx_cons;
 		cp->rx_cons = rx_cons;
+
 		uio_event_notify(cp->cnic_uinfo);
 	}
 }
@@ -1062,7 +2194,7 @@
 
 	cp->kcq_prod_idx = sw_prod;
 
-	cnic_chk_bnx2_pkt_rings(cp);
+	cnic_chk_pkt_rings(cp);
 	return status_idx;
 }
 
@@ -1100,7 +2232,7 @@
 	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
 	cp->kcq_prod_idx = sw_prod;
 
-	cnic_chk_bnx2_pkt_rings(cp);
+	cnic_chk_pkt_rings(cp);
 
 	cp->last_status_idx = status_idx;
 	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
@@ -1125,6 +2257,91 @@
 	return IRQ_HANDLED;
 }
 
+static inline void cnic_ack_bnx2x_int(struct cnic_dev *dev, u8 id, u8 storm,
+				      u16 index, u8 op, u8 update)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 hc_addr = (HC_REG_COMMAND_REG + CNIC_PORT(cp) * 32 +
+		       COMMAND_REG_INT_ACK);
+	struct igu_ack_register igu_ack;
+
+	igu_ack.status_block_index = index;
+	igu_ack.sb_id_and_flags =
+			((id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) |
+			 (storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) |
+			 (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
+			 (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
+
+	CNIC_WR(dev, hc_addr, (*(u32 *)&igu_ack));
+}
+
+static void cnic_ack_bnx2x_msix(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cnic_ack_bnx2x_int(dev, cp->status_blk_num, CSTORM_ID, 0,
+			   IGU_INT_DISABLE, 0);
+}
+
+static void cnic_service_bnx2x_bh(unsigned long data)
+{
+	struct cnic_dev *dev = (struct cnic_dev *) data;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 hw_prod, sw_prod;
+	struct cstorm_status_block_c *sblk =
+		&cp->bnx2x_status_blk->c_status_block;
+	u32 status_idx = sblk->status_block_index;
+	int kcqe_cnt;
+
+	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		return;
+
+	hw_prod = sblk->index_values[HC_INDEX_C_ISCSI_EQ_CONS];
+	hw_prod = cp->hw_idx(hw_prod);
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that sblk fields can change. */
+		barrier();
+		if (status_idx == sblk->status_block_index)
+			break;
+
+		status_idx = sblk->status_block_index;
+		hw_prod = sblk->index_values[HC_INDEX_C_ISCSI_EQ_CONS];
+		hw_prod = cp->hw_idx(hw_prod);
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod + MAX_KCQ_IDX);
+	cnic_ack_bnx2x_int(dev, cp->status_blk_num, CSTORM_ID,
+			   status_idx, IGU_INT_ENABLE, 1);
+
+	cp->kcq_prod_idx = sw_prod;
+	return;
+}
+
+static int cnic_service_bnx2x(void *data, void *status_blk)
+{
+	struct cnic_dev *dev = data;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
+
+	prefetch(cp->status_blk);
+	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+
+	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		tasklet_schedule(&cp->cnic_irq_task);
+
+	cnic_chk_pkt_rings(cp);
+
+	return 0;
+}
+
 static void cnic_ulp_stop(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -1197,6 +2414,19 @@
 
 		cnic_put(dev);
 		break;
+	case CNIC_CTL_COMPLETION_CMD: {
+		u32 cid = BNX2X_SW_CID(info->data.comp.cid);
+		u32 l5_cid;
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (cnic_get_l5_cid(cp, cid, &l5_cid) == 0) {
+			struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+
+			ctx->wait_cond = 1;
+			wake_up(&ctx->waitq);
+		}
+		break;
+	}
 	default:
 		return -EINVAL;
 	}
@@ -1872,6 +3102,8 @@
 		/* fall through */
 	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
 	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+	case L5CM_RAMROD_CMD_ID_SEARCHER_DELETE:
+	case L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD:
 		cp->close_conn(csk, opcode);
 		break;
 
@@ -1957,6 +3189,76 @@
 	return 0;
 }
 
+static void cnic_close_bnx2x_conn(struct cnic_sock *csk, u32 opcode)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx = &cp->ctx_tbl[csk->l5_cid];
+	union l5cm_specific_data l5_data;
+	u32 cmd = 0;
+	int close_complete = 0;
+
+	switch (opcode) {
+	case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
+	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
+	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+		if (cnic_ready_to_close(csk, opcode))
+			cmd = L5CM_RAMROD_CMD_ID_SEARCHER_DELETE;
+		break;
+	case L5CM_RAMROD_CMD_ID_SEARCHER_DELETE:
+		cmd = L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD;
+		break;
+	case L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD:
+		close_complete = 1;
+		break;
+	}
+	if (cmd) {
+		memset(&l5_data, 0, sizeof(l5_data));
+
+		cnic_submit_kwqe_16(dev, cmd, csk->cid, ISCSI_CONNECTION_TYPE,
+				    &l5_data);
+	} else if (close_complete) {
+		ctx->timestamp = jiffies;
+		cnic_close_conn(csk);
+		cnic_cm_upcall(cp, csk, csk->state);
+	}
+}
+
+static void cnic_cm_stop_bnx2x_hw(struct cnic_dev *dev)
+{
+}
+
+static int cnic_cm_init_bnx2x_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = CNIC_FUNC(cp);
+
+	cnic_init_bnx2x_mac(dev);
+	cnic_bnx2x_set_tcp_timestamp(dev, 1);
+
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM +
+		  XSTORM_ISCSI_LOCAL_VLAN_OFFSET(func), 0);
+
+	CNIC_WR(dev, BAR_XSTRORM_INTMEM +
+		XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_ENABLED_OFFSET(func), 1);
+	CNIC_WR(dev, BAR_XSTRORM_INTMEM +
+		XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_MAX_COUNT_OFFSET(func),
+		DEF_MAX_DA_COUNT);
+
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_TTL_OFFSET(func), DEF_TTL);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_TOS_OFFSET(func), DEF_TOS);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_ADV_WND_SCL_OFFSET(func), 2);
+	CNIC_WR(dev, BAR_XSTRORM_INTMEM +
+		XSTORM_TCP_TX_SWS_TIMER_VAL_OFFSET(func), DEF_SWS_TIMER);
+
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM + TSTORM_TCP_MAX_CWND_OFFSET(func),
+		DEF_MAX_CWND);
+	return 0;
+}
+
 static int cnic_cm_open(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -2091,7 +3393,7 @@
 
 		cp->bnx2_status_blk = cp->status_blk;
 		cp->last_status_idx = cp->bnx2_status_blk->status_idx;
-		tasklet_init(&cp->cnic_irq_task, &cnic_service_bnx2_msix,
+		tasklet_init(&cp->cnic_irq_task, cnic_service_bnx2_msix,
 			     (unsigned long) dev);
 		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
 				  "cnic", dev);
@@ -2464,6 +3766,426 @@
 	return 0;
 }
 
+static void cnic_setup_bnx2x_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 start_offset = ethdev->ctx_tbl_offset;
+	int i;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		struct cnic_ctx *ctx = &cp->ctx_arr[i];
+		dma_addr_t map = ctx->mapping;
+
+		if (cp->ctx_align) {
+			unsigned long mask = cp->ctx_align - 1;
+
+			map = (map + mask) & ~mask;
+		}
+
+		cnic_ctx_tbl_wr(dev, start_offset + i, map);
+	}
+}
+
+static int cnic_init_bnx2x_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int err = 0;
+
+	tasklet_init(&cp->cnic_irq_task, cnic_service_bnx2x_bh,
+		     (unsigned long) dev);
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
+				  "cnic", dev);
+		if (err)
+			tasklet_disable(&cp->cnic_irq_task);
+	}
+	return err;
+}
+
+static void cnic_enable_bnx2x_int(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u8 sb_id = cp->status_blk_num;
+	int port = CNIC_PORT(cp);
+
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		 CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, sb_id,
+					       HC_INDEX_C_ISCSI_EQ_CONS),
+		 64 / 12);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id,
+						HC_INDEX_C_ISCSI_EQ_CONS), 0);
+}
+
+static void cnic_disable_bnx2x_int_sync(struct cnic_dev *dev)
+{
+}
+
+static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	union eth_tx_bd_types *txbd = (union eth_tx_bd_types *) cp->l2_ring;
+	struct eth_context *context;
+	struct regpair context_addr;
+	dma_addr_t buf_map;
+	int func = CNIC_FUNC(cp);
+	int port = CNIC_PORT(cp);
+	int i;
+	int cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+	u32 val;
+
+	memset(txbd, 0, BCM_PAGE_SIZE);
+
+	buf_map = cp->l2_buf_map;
+	for (i = 0; i < MAX_TX_DESC_CNT; i += 3, txbd += 3) {
+		struct eth_tx_start_bd *start_bd = &txbd->start_bd;
+		struct eth_tx_bd *reg_bd = &((txbd + 2)->reg_bd);
+
+		start_bd->addr_hi = cpu_to_le32((u64) buf_map >> 32);
+		start_bd->addr_lo = cpu_to_le32(buf_map & 0xffffffff);
+		reg_bd->addr_hi = start_bd->addr_hi;
+		reg_bd->addr_lo = start_bd->addr_lo + 0x10;
+		start_bd->nbytes = cpu_to_le16(0x10);
+		start_bd->nbd = cpu_to_le16(3);
+		start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+		start_bd->general_data = (UNICAST_ADDRESS <<
+			ETH_TX_START_BD_ETH_ADDR_TYPE_SHIFT);
+		start_bd->general_data |= (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
+
+	}
+	context = cnic_get_bnx2x_ctx(dev, BNX2X_ISCSI_L2_CID, 1, &context_addr);
+
+	val = (u64) cp->l2_ring_map >> 32;
+	txbd->next_bd.addr_hi = cpu_to_le32(val);
+
+	context->xstorm_st_context.tx_bd_page_base_hi = val;
+
+	val = (u64) cp->l2_ring_map & 0xffffffff;
+	txbd->next_bd.addr_lo = cpu_to_le32(val);
+
+	context->xstorm_st_context.tx_bd_page_base_lo = val;
+
+	context->cstorm_st_context.sb_index_number =
+		HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS;
+	context->cstorm_st_context.status_block_id = BNX2X_DEF_SB_ID;
+
+	context->xstorm_st_context.statistics_data = (cli |
+				XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
+
+	context->xstorm_ag_context.cdu_reserved =
+		CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
+					CDU_REGION_NUMBER_XCM_AG,
+					ETH_CONNECTION_TYPE);
+
+	/* reset xstorm per client statistics */
+	val = BAR_XSTRORM_INTMEM +
+	      XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
+		CNIC_WR(dev, val + i * 4, 0);
+
+	cp->tx_cons_ptr =
+		&cp->bnx2x_def_status_blk->c_def_status_block.index_values[
+			HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS];
+}
+
+static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct eth_rx_bd *rxbd = (struct eth_rx_bd *) (cp->l2_ring +
+				BCM_PAGE_SIZE);
+	struct eth_rx_cqe_next_page *rxcqe = (struct eth_rx_cqe_next_page *)
+				(cp->l2_ring + (2 * BCM_PAGE_SIZE));
+	struct eth_context *context;
+	struct regpair context_addr;
+	int i;
+	int port = CNIC_PORT(cp);
+	int func = CNIC_FUNC(cp);
+	int cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+	u32 val;
+	struct tstorm_eth_client_config tstorm_client = {0};
+
+	for (i = 0; i < BNX2X_MAX_RX_DESC_CNT; i++, rxbd++) {
+		dma_addr_t buf_map;
+		int n = (i % cp->l2_rx_ring_size) + 1;
+
+		buf_map = cp->l2_buf_map + (n * cp->l2_single_buf_size);
+		rxbd->addr_hi = cpu_to_le32((u64) buf_map >> 32);
+		rxbd->addr_lo = cpu_to_le32(buf_map & 0xffffffff);
+	}
+	context = cnic_get_bnx2x_ctx(dev, BNX2X_ISCSI_L2_CID, 0, &context_addr);
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) >> 32;
+	rxbd->addr_hi = cpu_to_le32(val);
+
+	context->ustorm_st_context.common.bd_page_base_hi = val;
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) & 0xffffffff;
+	rxbd->addr_lo = cpu_to_le32(val);
+
+	context->ustorm_st_context.common.bd_page_base_lo = val;
+
+	context->ustorm_st_context.common.sb_index_numbers =
+						BNX2X_ISCSI_RX_SB_INDEX_NUM;
+	context->ustorm_st_context.common.clientId = cli;
+	context->ustorm_st_context.common.status_block_id = BNX2X_DEF_SB_ID;
+	context->ustorm_st_context.common.flags =
+		USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
+	context->ustorm_st_context.common.statistics_counter_id = cli;
+	context->ustorm_st_context.common.mc_alignment_log_size = 0;
+	context->ustorm_st_context.common.bd_buff_size =
+						cp->l2_single_buf_size;
+
+	context->ustorm_ag_context.cdu_usage =
+		CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
+					CDU_REGION_NUMBER_UCM_AG,
+					ETH_CONNECTION_TYPE);
+
+	rxcqe += BNX2X_MAX_RCQ_DESC_CNT;
+	val = (u64) (cp->l2_ring_map + (2 * BCM_PAGE_SIZE)) >> 32;
+	rxcqe->addr_hi = cpu_to_le32(val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_BASE_OFFSET(port, cli) + 4, val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_NEXT_OFFSET(port, cli) + 4, val);
+
+	val = (u64) (cp->l2_ring_map + (2 * BCM_PAGE_SIZE)) & 0xffffffff;
+	rxcqe->addr_lo = cpu_to_le32(val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_BASE_OFFSET(port, cli), val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_NEXT_OFFSET(port, cli), val);
+
+	/* client tstorm info */
+	tstorm_client.mtu = cp->l2_single_buf_size - 14;
+	tstorm_client.config_flags =
+			(TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE |
+			TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE);
+	tstorm_client.statistics_counter_id = cli;
+
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		   TSTORM_CLIENT_CONFIG_OFFSET(port, cli),
+		   ((u32 *)&tstorm_client)[0]);
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		   TSTORM_CLIENT_CONFIG_OFFSET(port, cli) + 4,
+		   ((u32 *)&tstorm_client)[1]);
+
+	/* reset tstorm per client statistics */
+	val = BAR_TSTRORM_INTMEM +
+	      TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
+		CNIC_WR(dev, val + i * 4, 0);
+
+	/* reset ustorm per client statistics */
+	val = BAR_USTRORM_INTMEM +
+	      USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+	for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
+		CNIC_WR(dev, val + i * 4, 0);
+
+	cp->rx_cons_ptr =
+		&cp->bnx2x_def_status_blk->u_def_status_block.index_values[
+			HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS];
+}
+
+static void cnic_get_bnx2x_iscsi_info(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 base, addr, val;
+	int port = CNIC_PORT(cp);
+
+	dev->max_iscsi_conn = 0;
+	base = CNIC_RD(dev, MISC_REG_SHARED_MEM_ADDR);
+	if (base < 0xa0000 || base >= 0xc0000)
+		return;
+
+	addr = BNX2X_SHMEM_ADDR(base,
+		dev_info.port_hw_config[port].iscsi_mac_upper);
+
+	val = CNIC_RD(dev, addr);
+
+	dev->mac_addr[0] = (u8) (val >> 8);
+	dev->mac_addr[1] = (u8) val;
+
+	addr = BNX2X_SHMEM_ADDR(base,
+		dev_info.port_hw_config[port].iscsi_mac_lower);
+
+	val = CNIC_RD(dev, addr);
+
+	dev->mac_addr[2] = (u8) (val >> 24);
+	dev->mac_addr[3] = (u8) (val >> 16);
+	dev->mac_addr[4] = (u8) (val >> 8);
+	dev->mac_addr[5] = (u8) val;
+
+	addr = BNX2X_SHMEM_ADDR(base, validity_map[port]);
+	val = CNIC_RD(dev, addr);
+
+	if (!(val & SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT)) {
+		u16 val16;
+
+		addr = BNX2X_SHMEM_ADDR(base,
+				drv_lic_key[port].max_iscsi_init_conn);
+		val16 = CNIC_RD16(dev, addr);
+
+		if (val16)
+			val16 ^= 0x1e1e;
+		dev->max_iscsi_conn = val16;
+	}
+	if (BNX2X_CHIP_IS_E1H(cp->chip_id)) {
+		int func = CNIC_FUNC(cp);
+
+		addr = BNX2X_SHMEM_ADDR(base,
+				mf_cfg.func_mf_config[func].e1hov_tag);
+		val = CNIC_RD(dev, addr);
+		val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
+		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+			addr = BNX2X_SHMEM_ADDR(base,
+				mf_cfg.func_mf_config[func].config);
+			val = CNIC_RD(dev, addr);
+			val &= FUNC_MF_CFG_PROTOCOL_MASK;
+			if (val != FUNC_MF_CFG_PROTOCOL_ISCSI)
+				dev->max_iscsi_conn = 0;
+		}
+	}
+}
+
+static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = CNIC_FUNC(cp), ret, i;
+	int port = CNIC_PORT(cp);
+	u16 eq_idx;
+	u8 sb_id = cp->status_blk_num;
+
+	ret = cnic_init_id_tbl(&cp->cid_tbl, MAX_ISCSI_TBL_SZ,
+			       BNX2X_ISCSI_START_CID);
+
+	if (ret)
+		return -ENOMEM;
+
+	cp->kcq_io_addr = BAR_CSTRORM_INTMEM +
+			  CSTORM_ISCSI_EQ_PROD_OFFSET(func, 0);
+	cp->kcq_prod_idx = 0;
+
+	cnic_get_bnx2x_iscsi_info(dev);
+
+	/* Only 1 EQ */
+	CNIC_WR16(dev, cp->kcq_io_addr, MAX_KCQ_IDX);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_CONS_OFFSET(func, 0), 0);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(func, 0),
+		cp->kcq_info.pg_map_arr[1] & 0xffffffff);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(func, 0) + 4,
+		(u64) cp->kcq_info.pg_map_arr[1] >> 32);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(func, 0),
+		cp->kcq_info.pg_map_arr[0] & 0xffffffff);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(func, 0) + 4,
+		(u64) cp->kcq_info.pg_map_arr[0] >> 32);
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_VALID_OFFSET(func, 0), 1);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_SB_NUM_OFFSET(func, 0), cp->status_blk_num);
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_SB_INDEX_OFFSET(func, 0),
+		HC_INDEX_C_ISCSI_EQ_CONS);
+
+	for (i = 0; i < cp->conn_buf_info.num_pages; i++) {
+		CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+			TSTORM_ISCSI_CONN_BUF_PBL_OFFSET(func, i),
+			cp->conn_buf_info.pgtbl[2 * i]);
+		CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+			TSTORM_ISCSI_CONN_BUF_PBL_OFFSET(func, i) + 4,
+			cp->conn_buf_info.pgtbl[(2 * i) + 1]);
+	}
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(func),
+		cp->gbl_buf_info.pg_map_arr[0] & 0xffffffff);
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(func) + 4,
+		(u64) cp->gbl_buf_info.pg_map_arr[0] >> 32);
+
+	cnic_setup_bnx2x_context(dev);
+
+	eq_idx = CNIC_RD16(dev, BAR_CSTRORM_INTMEM +
+			   CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id) +
+			   offsetof(struct cstorm_status_block_c,
+				    index_values[HC_INDEX_C_ISCSI_EQ_CONS]));
+	if (eq_idx != 0) {
+		printk(KERN_ERR PFX "%s: EQ cons index %x != 0\n",
+		       dev->netdev->name, eq_idx);
+		return -EBUSY;
+	}
+	ret = cnic_init_bnx2x_irq(dev);
+	if (ret)
+		return ret;
+
+	cnic_init_bnx2x_tx_ring(dev);
+	cnic_init_bnx2x_rx_ring(dev);
+
+	return 0;
+}
+
+static void cnic_init_rings(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		cnic_init_bnx2_tx_ring(dev);
+		cnic_init_bnx2_rx_ring(dev);
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+		u32 cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+		union l5cm_specific_data l5_data;
+		struct ustorm_eth_rx_producers rx_prods = {0};
+		u32 off, i;
+
+		rx_prods.bd_prod = 0;
+		rx_prods.cqe_prod = BNX2X_MAX_RCQ_DESC_CNT;
+		barrier();
+
+		off = BAR_USTRORM_INTMEM +
+			USTORM_RX_PRODS_OFFSET(CNIC_PORT(cp), cli);
+
+		for (i = 0; i < sizeof(struct ustorm_eth_rx_producers) / 4; i++)
+			CNIC_WR(dev, off + i * 4, ((u32 *) &rx_prods)[i]);
+
+		cnic_init_bnx2x_tx_ring(dev);
+		cnic_init_bnx2x_rx_ring(dev);
+
+		l5_data.phy_address.lo = cli;
+		l5_data.phy_address.hi = 0;
+		cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_CLIENT_SETUP,
+			BNX2X_ISCSI_L2_CID, ETH_CONNECTION_TYPE, &l5_data);
+		cnic_ring_ctl(dev, BNX2X_ISCSI_L2_CID, cli, 1);
+	}
+}
+
+static void cnic_shutdown_rings(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		cnic_shutdown_bnx2_rx_ring(dev);
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+		u32 cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+		union l5cm_specific_data l5_data;
+
+		cnic_ring_ctl(dev, BNX2X_ISCSI_L2_CID, cli, 0);
+
+		l5_data.phy_address.lo = cli;
+		l5_data.phy_address.hi = 0;
+		cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_HALT,
+			BNX2X_ISCSI_L2_CID, ETH_CONNECTION_TYPE, &l5_data);
+		msleep(10);
+	}
+}
+
 static int cnic_register_netdev(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -2554,6 +4276,22 @@
 	cnic_free_resc(dev);
 }
 
+
+static void cnic_stop_bnx2x_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u8 sb_id = cp->status_blk_num;
+	int port = CNIC_PORT(cp);
+
+	cnic_free_irq(dev);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id) +
+		  offsetof(struct cstorm_status_block_c,
+			   index_values[HC_INDEX_C_ISCSI_EQ_CONS]),
+		  0);
+	cnic_free_resc(dev);
+}
+
 static void cnic_stop_hw(struct cnic_dev *dev)
 {
 	if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
@@ -2685,6 +4423,57 @@
 	return NULL;
 }
 
+static struct cnic_dev *init_bnx2x_cnic(struct net_device *dev)
+{
+	struct pci_dev *pdev;
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	struct cnic_eth_dev *ethdev = NULL;
+	struct cnic_eth_dev *(*probe)(struct net_device *) = NULL;
+
+	probe = symbol_get(bnx2x_cnic_probe);
+	if (probe) {
+		ethdev = (*probe)(dev);
+		symbol_put(bnx2x_cnic_probe);
+	}
+	if (!ethdev)
+		return NULL;
+
+	pdev = ethdev->pdev;
+	if (!pdev)
+		return NULL;
+
+	dev_hold(dev);
+	cdev = cnic_alloc_dev(dev, pdev);
+	if (cdev == NULL) {
+		dev_put(dev);
+		return NULL;
+	}
+
+	set_bit(CNIC_F_BNX2X_CLASS, &cdev->flags);
+	cdev->submit_kwqes = cnic_submit_bnx2x_kwqes;
+
+	cp = cdev->cnic_priv;
+	cp->ethdev = ethdev;
+	cdev->pcidev = pdev;
+
+	cp->cnic_ops = &cnic_bnx2x_ops;
+	cp->start_hw = cnic_start_bnx2x_hw;
+	cp->stop_hw = cnic_stop_bnx2x_hw;
+	cp->setup_pgtbl = cnic_setup_page_tbl_le;
+	cp->alloc_resc = cnic_alloc_bnx2x_resc;
+	cp->free_resc = cnic_free_resc;
+	cp->start_cm = cnic_cm_init_bnx2x_hw;
+	cp->stop_cm = cnic_cm_stop_bnx2x_hw;
+	cp->enable_int = cnic_enable_bnx2x_int;
+	cp->disable_int_sync = cnic_disable_bnx2x_int_sync;
+	cp->ack_int = cnic_ack_bnx2x_msix;
+	cp->close_conn = cnic_close_bnx2x_conn;
+	cp->next_idx = cnic_bnx2x_next_idx;
+	cp->hw_idx = cnic_bnx2x_hw_idx;
+	return cdev;
+}
+
 static struct cnic_dev *is_cnic_dev(struct net_device *dev)
 {
 	struct ethtool_drvinfo drvinfo;
@@ -2696,6 +4485,8 @@
 
 		if (!strcmp(drvinfo.driver, "bnx2"))
 			cdev = init_bnx2_cnic(dev);
+		if (!strcmp(drvinfo.driver, "bnx2x"))
+			cdev = init_bnx2x_cnic(dev);
 		if (cdev) {
 			write_lock(&cnic_dev_lock);
 			list_add(&cdev->list, &cnic_dev_list);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index a94b302..241d09a 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -227,6 +227,7 @@
 	void				*status_blk;
 	struct status_block_msix	*bnx2_status_blk;
 	struct host_status_block	*bnx2x_status_blk;
+	struct host_def_status_block	*bnx2x_def_status_blk;
 
 	u32				status_blk_num;
 	u32				int_num;
@@ -258,6 +259,7 @@
 	struct cnic_ctx		*ctx_arr;
 	int			ctx_blks;
 	int			ctx_blk_size;
+	unsigned long		ctx_align;
 	int			cids_per_blk;
 
 	u32			chip_id;
@@ -290,11 +292,73 @@
 	u8	reserved[8];
 };
 
+#define ISCSI_DEFAULT_MAX_OUTSTANDING_R2T 	(1)
+
 #define ISCSI_RAMROD_CMD_ID_UPDATE_CONN		(ISCSI_KCQE_OPCODE_UPDATE_CONN)
 #define ISCSI_RAMROD_CMD_ID_INIT		(ISCSI_KCQE_OPCODE_INIT)
 
 #define CDU_REGION_NUMBER_XCM_AG 2
 #define CDU_REGION_NUMBER_UCM_AG 4
 
+#define CDU_VALID_DATA(_cid, _region, _type)	\
+	(((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
+
+#define CDU_CRC8(_cid, _region, _type)	\
+	(calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
+
+#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)	\
+	(0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
+
+#define BNX2X_CONTEXT_MEM_SIZE		1024
+#define BNX2X_FCOE_CID			16
+
+/* iSCSI client IDs are 17, 19, 21, 23 */
+#define BNX2X_ISCSI_BASE_CL_ID		17
+#define BNX2X_ISCSI_CL_ID(vn)		(BNX2X_ISCSI_BASE_CL_ID + ((vn) << 1))
+
+#define BNX2X_ISCSI_L2_CID		17
+#define BNX2X_ISCSI_START_CID		18
+#define BNX2X_ISCSI_NUM_CONNECTIONS	128
+#define BNX2X_ISCSI_TASK_CONTEXT_SIZE	128
+#define BNX2X_ISCSI_MAX_PENDING_R2TS	4
+#define BNX2X_ISCSI_R2TQE_SIZE		8
+#define BNX2X_ISCSI_HQ_BD_SIZE		64
+#define BNX2X_ISCSI_CONN_BUF_SIZE	64
+#define BNX2X_ISCSI_GLB_BUF_SIZE	64
+#define BNX2X_ISCSI_PBL_NOT_CACHED	0xff
+#define BNX2X_ISCSI_PDU_HEADER_NOT_CACHED	0xff
+#define BNX2X_HW_CID(x, func)		((x) | (((func) % PORT_MAX) << 23) | \
+					 (((func) >> 1) << 17))
+#define BNX2X_SW_CID(x)			(x & 0x1ffff)
+#define BNX2X_CHIP_NUM_57711		0x164f
+#define BNX2X_CHIP_NUM_57711E		0x1650
+#define BNX2X_CHIP_NUM(x)		(x >> 16)
+#define BNX2X_CHIP_IS_57711(x)		\
+	(BNX2X_CHIP_NUM(x) == BNX2X_CHIP_NUM_57711)
+#define BNX2X_CHIP_IS_57711E(x)		\
+	(BNX2X_CHIP_NUM(x) == BNX2X_CHIP_NUM_57711E)
+#define BNX2X_CHIP_IS_E1H(x)		\
+	(BNX2X_CHIP_IS_57711(x) || BNX2X_CHIP_IS_57711E(x))
+#define IS_E1H_OFFSET       		BNX2X_CHIP_IS_E1H(cp->chip_id)
+
+#define BNX2X_RX_DESC_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
+#define BNX2X_MAX_RX_DESC_CNT		(BNX2X_RX_DESC_CNT - 2)
+#define BNX2X_RCQ_DESC_CNT		(BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
+#define BNX2X_MAX_RCQ_DESC_CNT		(BNX2X_RCQ_DESC_CNT - 1)
+
+#define BNX2X_DEF_SB_ID			16
+
+#define BNX2X_ISCSI_RX_SB_INDEX_NUM					\
+		((HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS << \
+		  USTORM_ETH_ST_CONTEXT_CONFIG_CQE_SB_INDEX_NUMBER_SHIFT) & \
+		 USTORM_ETH_ST_CONTEXT_CONFIG_CQE_SB_INDEX_NUMBER)
+
+#define BNX2X_SHMEM_ADDR(base, field)	(base + \
+					 offsetof(struct shmem_region, field))
+
+#define CNIC_PORT(cp)			((cp)->func % PORT_MAX)
+#define CNIC_FUNC(cp)			((cp)->func)
+#define CNIC_E1HVN(cp)			((cp)->func >> 1)
+
 #endif
 
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
index cee80f6..9827b27 100644
--- a/drivers/net/cnic_defs.h
+++ b/drivers/net/cnic_defs.h
@@ -51,6 +51,9 @@
 #define L4_KCQE_COMPLETION_STATUS_SUCCESS		    (0)
 #define L4_KCQE_COMPLETION_STATUS_TIMEOUT        (0x93)
 
+#define L4_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAIL (0x83)
+#define L4_KCQE_COMPLETION_STATUS_OFFLOADED_PG   (0x89)
+
 #define L4_LAYER_CODE (4)
 #define L2_LAYER_CODE (2)
 
@@ -577,4 +580,1918 @@
 	u32 reserved2[6];
 };
 
+/*
+ * bnx2x structures
+ */
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_rq_db {
+	struct regpair pbl_base;
+	struct regpair curr_pbe;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_r2tq_db {
+	struct regpair pbl_base;
+	struct regpair curr_pbe;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_cq_db {
+#if defined(__BIG_ENDIAN)
+	u16 cq_sn;
+	u16 prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 prod;
+	u16 cq_sn;
+#endif
+	struct regpair curr_pbe;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct rings_db {
+	struct ustorm_iscsi_rq_db rq;
+	struct ustorm_iscsi_r2tq_db r2tq;
+	struct ustorm_iscsi_cq_db cq[8];
+#if defined(__BIG_ENDIAN)
+	u16 rq_prod;
+	u16 r2tq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 r2tq_prod;
+	u16 rq_prod;
+#endif
+	struct regpair cq_pbl_base;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_placement_db {
+	u32 sgl_base_lo;
+	u32 sgl_base_hi;
+	u32 local_sge_0_address_hi;
+	u32 local_sge_0_address_lo;
+#if defined(__BIG_ENDIAN)
+	u16 curr_sge_offset;
+	u16 local_sge_0_size;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_sge_0_size;
+	u16 curr_sge_offset;
+#endif
+	u32 local_sge_1_address_hi;
+	u32 local_sge_1_address_lo;
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 local_sge_1_size;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_sge_1_size;
+	u16 reserved6;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sgl_size;
+	u8 local_sge_index_2b;
+	u16 reserved7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved7;
+	u8 local_sge_index_2b;
+	u8 sgl_size;
+#endif
+	u32 rem_pdu;
+	u32 place_db_bitfield_1;
+#define USTORM_ISCSI_PLACEMENT_DB_REM_PDU_PAYLOAD (0xFFFFFF<<0)
+#define USTORM_ISCSI_PLACEMENT_DB_REM_PDU_PAYLOAD_SHIFT 0
+#define USTORM_ISCSI_PLACEMENT_DB_CQ_ID (0xFF<<24)
+#define USTORM_ISCSI_PLACEMENT_DB_CQ_ID_SHIFT 24
+	u32 place_db_bitfield_2;
+#define USTORM_ISCSI_PLACEMENT_DB_BYTES_2_TRUNCATE (0xFFFFFF<<0)
+#define USTORM_ISCSI_PLACEMENT_DB_BYTES_2_TRUNCATE_SHIFT 0
+#define USTORM_ISCSI_PLACEMENT_DB_HOST_SGE_INDEX (0xFF<<24)
+#define USTORM_ISCSI_PLACEMENT_DB_HOST_SGE_INDEX_SHIFT 24
+	u32 nal;
+#define USTORM_ISCSI_PLACEMENT_DB_REM_SGE_SIZE (0xFFFFFF<<0)
+#define USTORM_ISCSI_PLACEMENT_DB_REM_SGE_SIZE_SHIFT 0
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_PADDING_2B (0x3<<24)
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_PADDING_2B_SHIFT 24
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_DIGEST_3B (0x7<<26)
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_DIGEST_3B_SHIFT 26
+#define USTORM_ISCSI_PLACEMENT_DB_NAL_LEN_3B (0x7<<29)
+#define USTORM_ISCSI_PLACEMENT_DB_NAL_LEN_3B_SHIFT 29
+};
+
+/*
+ * Ustorm iSCSI Storm Context
+ */
+struct ustorm_iscsi_st_context {
+	u32 exp_stat_sn;
+	u32 exp_data_sn;
+	struct rings_db ring;
+	struct regpair task_pbl_base;
+	struct regpair tce_phy_addr;
+	struct ustorm_iscsi_placement_db place_db;
+	u32 data_rcv_seq;
+	u32 rem_rcv_len;
+#if defined(__BIG_ENDIAN)
+	u16 hdr_itt;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	u16 hdr_itt;
+#endif
+	u32 nal_bytes;
+#if defined(__BIG_ENDIAN)
+	u8 hdr_second_byte_union;
+	u8 bitfield_0;
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU (0x1<<0)
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE (0x1<<1)
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE_SHIFT 1
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1 (0x3F<<2)
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1_SHIFT 2
+	u8 task_pdu_cache_index;
+	u8 task_pbe_cache_index;
+#elif defined(__LITTLE_ENDIAN)
+	u8 task_pbe_cache_index;
+	u8 task_pdu_cache_index;
+	u8 bitfield_0;
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU (0x1<<0)
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE (0x1<<1)
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE_SHIFT 1
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1 (0x3F<<2)
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1_SHIFT 2
+	u8 hdr_second_byte_union;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u8 reserved2;
+	u8 acDecrement;
+#elif defined(__LITTLE_ENDIAN)
+	u8 acDecrement;
+	u8 reserved2;
+	u16 reserved3;
+#endif
+	u32 task_stat;
+#if defined(__BIG_ENDIAN)
+	u8 hdr_opcode;
+	u8 num_cqs;
+	u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved5;
+	u8 num_cqs;
+	u8 hdr_opcode;
+#endif
+	u32 negotiated_rx;
+#define USTORM_ISCSI_ST_CONTEXT_MAX_RECV_PDU_LENGTH (0xFFFFFF<<0)
+#define USTORM_ISCSI_ST_CONTEXT_MAX_RECV_PDU_LENGTH_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_MAX_OUTSTANDING_R2TS (0xFF<<24)
+#define USTORM_ISCSI_ST_CONTEXT_MAX_OUTSTANDING_R2TS_SHIFT 24
+	u32 negotiated_rx_and_flags;
+#define USTORM_ISCSI_ST_CONTEXT_MAX_BURST_LENGTH (0xFFFFFF<<0)
+#define USTORM_ISCSI_ST_CONTEXT_MAX_BURST_LENGTH_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_B_CQE_POSTED_OR_HEADER_CACHED (0x1<<24)
+#define USTORM_ISCSI_ST_CONTEXT_B_CQE_POSTED_OR_HEADER_CACHED_SHIFT 24
+#define USTORM_ISCSI_ST_CONTEXT_B_HDR_DIGEST_EN (0x1<<25)
+#define USTORM_ISCSI_ST_CONTEXT_B_HDR_DIGEST_EN_SHIFT 25
+#define USTORM_ISCSI_ST_CONTEXT_B_DATA_DIGEST_EN (0x1<<26)
+#define USTORM_ISCSI_ST_CONTEXT_B_DATA_DIGEST_EN_SHIFT 26
+#define USTORM_ISCSI_ST_CONTEXT_B_PROTOCOL_ERROR (0x1<<27)
+#define USTORM_ISCSI_ST_CONTEXT_B_PROTOCOL_ERROR_SHIFT 27
+#define USTORM_ISCSI_ST_CONTEXT_B_TASK_VALID (0x1<<28)
+#define USTORM_ISCSI_ST_CONTEXT_B_TASK_VALID_SHIFT 28
+#define USTORM_ISCSI_ST_CONTEXT_TASK_TYPE (0x3<<29)
+#define USTORM_ISCSI_ST_CONTEXT_TASK_TYPE_SHIFT 29
+#define USTORM_ISCSI_ST_CONTEXT_B_ALL_DATA_ACKED (0x1<<31)
+#define USTORM_ISCSI_ST_CONTEXT_B_ALL_DATA_ACKED_SHIFT 31
+};
+
+/*
+ * TCP context region, shared in TOE, RDMA and ISCSI
+ */
+struct tstorm_tcp_st_context_section {
+	u32 flags1;
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_SRTT_20B (0xFFFFFF<<0)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_SRTT_20B_SHIFT 0
+#define TSTORM_TCP_ST_CONTEXT_SECTION_PAWS_INVALID (0x1<<24)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_PAWS_INVALID_SHIFT 24
+#define TSTORM_TCP_ST_CONTEXT_SECTION_TIMESTAMP_EXISTS (0x1<<25)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_TIMESTAMP_EXISTS_SHIFT 25
+#define TSTORM_TCP_ST_CONTEXT_SECTION_ISLE_EXISTS (0x1<<26)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_ISLE_EXISTS_SHIFT 26
+#define TSTORM_TCP_ST_CONTEXT_SECTION_STOP_RX_PAYLOAD (0x1<<27)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_STOP_RX_PAYLOAD_SHIFT 27
+#define TSTORM_TCP_ST_CONTEXT_SECTION_KA_ENABLED (0x1<<28)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_KA_ENABLED_SHIFT 28
+#define TSTORM_TCP_ST_CONTEXT_SECTION_FIRST_RTO_ESTIMATE (0x1<<29)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_FIRST_RTO_ESTIMATE_SHIFT 29
+#define TSTORM_TCP_ST_CONTEXT_SECTION_MAX_SEG_RETRANSMIT_EN (0x1<<30)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_MAX_SEG_RETRANSMIT_EN_SHIFT 30
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RESERVED3 (0x1<<31)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RESERVED3_SHIFT 31
+	u32 flags2;
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_VARIATION_20B (0xFFFFFF<<0)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_VARIATION_20B_SHIFT 0
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_EN (0x1<<24)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_EN_SHIFT 24
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_COUNTER_EN (0x1<<25)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_COUNTER_EN_SHIFT 25
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_KA_PROBE_SENT (0x1<<26)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_KA_PROBE_SENT_SHIFT 26
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_PERSIST_PROBE_SENT (0x1<<27)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_PERSIST_PROBE_SENT_SHIFT 27
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L2_STATSTICS (0x1<<28)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L2_STATSTICS_SHIFT 28
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L4_STATSTICS (0x1<<29)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L4_STATSTICS_SHIFT 29
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_SECOND_ISLE_DROPPED (0x1<<30)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_SECOND_ISLE_DROPPED_SHIFT 30
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_DONT_SUPPORT_OOO (0x1<<31)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_DONT_SUPPORT_OOO_SHIFT 31
+#if defined(__BIG_ENDIAN)
+	u16 reserved_slowpath;
+	u8 tcp_sm_state_3b;
+	u8 rto_exp_3b;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rto_exp_3b;
+	u8 tcp_sm_state_3b;
+	u16 reserved_slowpath;
+#endif
+	u32 rcv_nxt;
+	u32 timestamp_recent;
+	u32 timestamp_recent_time;
+	u32 cwnd;
+	u32 ss_thresh;
+	u32 cwnd_accum;
+	u32 prev_seg_seq;
+	u32 expected_rel_seq;
+	u32 recover;
+#if defined(__BIG_ENDIAN)
+	u8 retransmit_count;
+	u8 ka_max_probe_count;
+	u8 persist_probe_count;
+	u8 ka_probe_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_probe_count;
+	u8 persist_probe_count;
+	u8 ka_max_probe_count;
+	u8 retransmit_count;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 statistics_counter_id;
+	u8 ooo_support_mode;
+	u8 snd_wnd_scale_4b;
+	u8 dup_ack_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 dup_ack_count;
+	u8 snd_wnd_scale_4b;
+	u8 ooo_support_mode;
+	u8 statistics_counter_id;
+#endif
+	u32 retransmit_start_time;
+	u32 ka_timeout;
+	u32 ka_interval;
+	u32 isle_start_seq;
+	u32 isle_end_seq;
+#if defined(__BIG_ENDIAN)
+	u16 mss;
+	u16 recent_seg_wnd;
+#elif defined(__LITTLE_ENDIAN)
+	u16 recent_seg_wnd;
+	u16 mss;
+#endif
+	u32 reserved4;
+	u32 max_rt_time;
+#if defined(__BIG_ENDIAN)
+	u16 lsb_mac_address;
+	u16 vlan_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 vlan_id;
+	u16 lsb_mac_address;
+#endif
+	u32 msb_mac_address;
+	u32 reserved2;
+};
+
+/*
+ * Termination variables
+ */
+struct iscsi_term_vars {
+	u8 BitMap;
+#define ISCSI_TERM_VARS_TCP_STATE (0xF<<0)
+#define ISCSI_TERM_VARS_TCP_STATE_SHIFT 0
+#define ISCSI_TERM_VARS_FIN_RECEIVED_SBIT (0x1<<4)
+#define ISCSI_TERM_VARS_FIN_RECEIVED_SBIT_SHIFT 4
+#define ISCSI_TERM_VARS_ACK_ON_FIN_RECEIVED_SBIT (0x1<<5)
+#define ISCSI_TERM_VARS_ACK_ON_FIN_RECEIVED_SBIT_SHIFT 5
+#define ISCSI_TERM_VARS_TERM_ON_CHIP (0x1<<6)
+#define ISCSI_TERM_VARS_TERM_ON_CHIP_SHIFT 6
+#define ISCSI_TERM_VARS_RSRV (0x1<<7)
+#define ISCSI_TERM_VARS_RSRV_SHIFT 7
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct tstorm_iscsi_st_context_section {
+#if defined(__BIG_ENDIAN)
+	u16 rem_tcp_data_len;
+	u16 brb_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 brb_offset;
+	u16 rem_tcp_data_len;
+#endif
+	u32 b2nh;
+#if defined(__BIG_ENDIAN)
+	u16 rq_cons;
+	u8 flags;
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN (0x1<<0)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN_SHIFT 0
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN (0x1<<1)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN_SHIFT 1
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER (0x1<<2)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER_SHIFT 2
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE (0x1<<3)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE_SHIFT 3
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS (0x1<<4)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS_SHIFT 4
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV (0x7<<5)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV_SHIFT 5
+	u8 hdr_bytes_2_fetch;
+#elif defined(__LITTLE_ENDIAN)
+	u8 hdr_bytes_2_fetch;
+	u8 flags;
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN (0x1<<0)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN_SHIFT 0
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN (0x1<<1)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN_SHIFT 1
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER (0x1<<2)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER_SHIFT 2
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE (0x1<<3)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE_SHIFT 3
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS (0x1<<4)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS_SHIFT 4
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV (0x7<<5)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV_SHIFT 5
+	u16 rq_cons;
+#endif
+	struct regpair rq_db_phy_addr;
+#if defined(__BIG_ENDIAN)
+	struct iscsi_term_vars term_vars;
+	u8 scratchpad_idx;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	u8 scratchpad_idx;
+	struct iscsi_term_vars term_vars;
+#endif
+	u32 reserved2;
+};
+
+/*
+ * The iSCSI non-aggregative context of Tstorm
+ */
+struct tstorm_iscsi_st_context {
+	struct tstorm_tcp_st_context_section tcp;
+	struct tstorm_iscsi_st_context_section iscsi;
+};
+
+/*
+ * The tcp aggregative context section of Xstorm
+ */
+struct xstorm_tcp_tcp_ag_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars1;
+	u8 __da_cnt;
+	u16 mss;
+#elif defined(__LITTLE_ENDIAN)
+	u16 mss;
+	u8 __da_cnt;
+	u8 __tcp_agg_vars1;
+#endif
+	u32 snd_nxt;
+	u32 tx_wnd;
+	u32 snd_una;
+	u32 local_adv_wnd;
+#if defined(__BIG_ENDIAN)
+	u8 __agg_val8_th;
+	u8 __agg_val8;
+	u16 tcp_agg_vars2;
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG (0x1<<0)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_SHIFT 0
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED (0x1<<1)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED_SHIFT 1
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE (0x1<<2)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE_SHIFT 2
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG (0x1<<3)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG_SHIFT 3
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG (0x1<<4)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG_SHIFT 4
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE (0x1<<5)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE_SHIFT 5
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN (0x1<<6)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN_SHIFT 6
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN (0x1<<7)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN_SHIFT 7
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN (0x1<<8)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN_SHIFT 8
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<9)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 9
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF (0x3<<10)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF_SHIFT 10
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF (0x3<<12)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF_SHIFT 12
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF (0x3<<14)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 tcp_agg_vars2;
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG (0x1<<0)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_SHIFT 0
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED (0x1<<1)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED_SHIFT 1
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE (0x1<<2)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE_SHIFT 2
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG (0x1<<3)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG_SHIFT 3
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG (0x1<<4)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG_SHIFT 4
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE (0x1<<5)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE_SHIFT 5
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN (0x1<<6)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN_SHIFT 6
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN (0x1<<7)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN_SHIFT 7
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN (0x1<<8)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN_SHIFT 8
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<9)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 9
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF (0x3<<10)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF_SHIFT 10
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF (0x3<<12)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF_SHIFT 12
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF (0x3<<14)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_SHIFT 14
+	u8 __agg_val8;
+	u8 __agg_val8_th;
+#endif
+	u32 ack_to_far_end;
+	u32 rto_timer;
+	u32 ka_timer;
+	u32 ts_to_echo;
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val7_th;
+	u16 __agg_val7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val7;
+	u16 __agg_val7_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars5;
+	u8 __tcp_agg_vars4;
+	u8 __tcp_agg_vars3;
+	u8 __force_pure_ack_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __force_pure_ack_cnt;
+	u8 __tcp_agg_vars3;
+	u8 __tcp_agg_vars4;
+	u8 __tcp_agg_vars5;
+#endif
+	u32 tcp_agg_vars6;
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_CF_EN (0x1<<0)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_CF_EN_SHIFT 0
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_EN (0x1<<1)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_EN_SHIFT 1
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF_EN (0x1<<2)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF_EN_SHIFT 2
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN (0x1<<3)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN_SHIFT 3
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX6_FLAG (0x1<<4)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX6_FLAG_SHIFT 4
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX7_FLAG (0x1<<5)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX7_FLAG_SHIFT 5
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX5_CF (0x3<<6)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX5_CF_SHIFT 6
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF (0x3<<8)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF_SHIFT 8
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF (0x3<<10)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_SHIFT 10
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF (0x3<<12)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF_SHIFT 12
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF (0x3<<14)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF_SHIFT 14
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX13_CF (0x3<<16)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX13_CF_SHIFT 16
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX14_CF (0x3<<18)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX14_CF_SHIFT 18
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX15_CF (0x3<<20)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX15_CF_SHIFT 20
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX16_CF (0x3<<22)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX16_CF_SHIFT 22
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX17_CF (0x3<<24)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX17_CF_SHIFT 24
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ECE_FLAG (0x1<<26)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ECE_FLAG_SHIFT 26
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED71 (0x1<<27)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED71_SHIFT 27
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_FORCE_PURE_ACK_CNT_DIRTY (0x1<<28)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_FORCE_PURE_ACK_CNT_DIRTY_SHIFT 28
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TCP_AUTO_STOP_FLAG (0x1<<29)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TCP_AUTO_STOP_FLAG_SHIFT 29
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DO_TS_UPDATE_FLAG (0x1<<30)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DO_TS_UPDATE_FLAG_SHIFT 30
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_CANCEL_RETRANSMIT_FLAG (0x1<<31)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_CANCEL_RETRANSMIT_FLAG_SHIFT 31
+#if defined(__BIG_ENDIAN)
+	u16 __agg_misc6;
+	u16 __tcp_agg_vars7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __tcp_agg_vars7;
+	u16 __agg_misc6;
+#endif
+	u32 __agg_val10;
+	u32 __agg_val10_th;
+#if defined(__BIG_ENDIAN)
+	u16 __reserved3;
+	u8 __reserved2;
+	u8 __da_only_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __da_only_cnt;
+	u8 __reserved2;
+	u16 __reserved3;
+#endif
+};
+
+/*
+ * The iscsi aggregative context of Xstorm
+ */
+struct xstorm_iscsi_ag_context {
+#if defined(__BIG_ENDIAN)
+	u16 agg_val1;
+	u8 agg_vars1;
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN (0x1<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN_SHIFT 7
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN (0x1<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN_SHIFT 7
+	u16 agg_val1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cdu_reserved;
+	u8 agg_vars4;
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF (0x3<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN_SHIFT 4
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN (0x1<<5)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN_SHIFT 7
+	u8 agg_vars3;
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2 (0x3F<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF (0x3<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_SHIFT 6
+	u8 agg_vars2;
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF (0x3<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN (0x1<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1 (0x3<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_vars2;
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF (0x3<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN (0x1<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1 (0x3<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+	u8 agg_vars3;
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2 (0x3F<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF (0x3<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_SHIFT 6
+	u8 agg_vars4;
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF (0x3<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN_SHIFT 4
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN (0x1<<5)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN_SHIFT 7
+	u8 cdu_reserved;
+#endif
+	u32 more_to_send;
+#if defined(__BIG_ENDIAN)
+	u16 agg_vars5;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5 (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0 (0x3F<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1 (0x3F<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1_SHIFT 8
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2 (0x3<<14)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2_SHIFT 14
+	u16 sq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_cons;
+	u16 agg_vars5;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5 (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0 (0x3F<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1 (0x3F<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1_SHIFT 8
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2 (0x3<<14)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2_SHIFT 14
+#endif
+	struct xstorm_tcp_tcp_ag_context_section tcp;
+#if defined(__BIG_ENDIAN)
+	u16 agg_vars7;
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE (0x7<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF (0x3<<4)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3_SHIFT 6
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF (0x3<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_SHIFT 8
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK (0x1<<10)
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK_SHIFT 10
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN (0x1<<11)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN_SHIFT 11
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG (0x1<<12)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG_SHIFT 12
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG (0x1<<13)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG_SHIFT 13
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG (0x1<<14)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG_SHIFT 14
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG (0x1<<15)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG_SHIFT 15
+	u8 agg_val3_th;
+	u8 agg_vars6;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6 (0x7<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7 (0x7<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_vars6;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6 (0x7<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7 (0x7<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4_SHIFT 6
+	u8 agg_val3_th;
+	u16 agg_vars7;
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE (0x7<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF (0x3<<4)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3_SHIFT 6
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF (0x3<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_SHIFT 8
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK (0x1<<10)
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK_SHIFT 10
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN (0x1<<11)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN_SHIFT 11
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG (0x1<<12)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG_SHIFT 12
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG (0x1<<13)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG_SHIFT 13
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG (0x1<<14)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG_SHIFT 14
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG (0x1<<15)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG_SHIFT 15
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val11_th;
+	u16 __agg_val11;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val11;
+	u16 __agg_val11_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __reserved1;
+	u8 __agg_val6_th;
+	u16 __agg_val9;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val9;
+	u8 __agg_val6_th;
+	u8 __reserved1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 hq_prod;
+	u16 hq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_cons;
+	u16 hq_prod;
+#endif
+	u32 agg_vars8;
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC2 (0xFFFFFF<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC2_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC3 (0xFF<<24)
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC3_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 r2tq_prod;
+	u16 sq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_prod;
+	u16 r2tq_prod;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 agg_val3;
+	u8 agg_val6;
+	u8 agg_val5_th;
+	u8 agg_val5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_val5;
+	u8 agg_val5_th;
+	u8 agg_val6;
+	u8 agg_val3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_misc1;
+	u16 agg_limit1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_limit1;
+	u16 __agg_misc1;
+#endif
+	u32 hq_cons_tcp_seq;
+	u32 exp_stat_sn;
+	u32 agg_misc5;
+};
+
+/*
+ * The tcp aggregative context section of Tstorm
+ */
+struct tstorm_tcp_tcp_ag_context_section {
+	u32 __agg_val1;
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars2;
+	u8 __agg_val3;
+	u16 __agg_val2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val2;
+	u8 __agg_val3;
+	u8 __tcp_agg_vars2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val5;
+	u8 __agg_val6;
+	u8 __tcp_agg_vars3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __tcp_agg_vars3;
+	u8 __agg_val6;
+	u16 __agg_val5;
+#endif
+	u32 snd_nxt;
+	u32 rtt_seq;
+	u32 rtt_time;
+	u32 __reserved66;
+	u32 wnd_right_edge;
+	u32 tcp_agg_vars1;
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<0)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 0
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_LAST_PACKET_FIN_FLAG (0x1<<1)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_LAST_PACKET_FIN_FLAG_SHIFT 1
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF (0x3<<2)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF_SHIFT 2
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF (0x3<<4)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF_SHIFT 4
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF_EN (0x1<<6)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF_EN_SHIFT 6
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF_EN (0x1<<7)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF_EN_SHIFT 7
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_SEQ_EN (0x1<<8)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_SEQ_EN_SHIFT 8
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_SND_NXT_EN (0x1<<9)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_SND_NXT_EN_SHIFT 9
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<10)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 10
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_FLAG (0x1<<11)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_FLAG_SHIFT 11
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF_EN (0x1<<12)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF_EN_SHIFT 12
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF_EN (0x1<<13)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF_EN_SHIFT 13
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF (0x3<<14)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF_SHIFT 14
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF (0x3<<16)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF_SHIFT 16
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_BLOCKED (0x1<<18)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_BLOCKED_SHIFT 18
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN (0x1<<19)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN_SHIFT 19
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF_EN (0x1<<20)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF_EN_SHIFT 20
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF_EN (0x1<<21)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF_EN_SHIFT 21
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED1 (0x3<<22)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED1_SHIFT 22
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_PEND_SEQ (0xF<<24)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_PEND_SEQ_SHIFT 24
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_DONE_SEQ (0xF<<28)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_DONE_SEQ_SHIFT 28
+	u32 snd_max;
+	u32 snd_una;
+	u32 __reserved2;
+};
+
+/*
+ * The iscsi aggregative context of Tstorm
+ */
+struct tstorm_iscsi_ag_context {
+#if defined(__BIG_ENDIAN)
+	u16 ulp_credit;
+	u8 agg_vars1;
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG (0x1<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG (0x1<<7)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG_SHIFT 7
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG (0x1<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG (0x1<<7)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG_SHIFT 7
+	u16 ulp_credit;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val4;
+	u16 agg_vars2;
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG (0x1<<0)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG_SHIFT 0
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG (0x1<<1)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG_SHIFT 1
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF (0x3<<2)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_SHIFT 2
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF (0x3<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF (0x3<<8)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_SHIFT 8
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG (0x1<<10)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG_SHIFT 10
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<11)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 11
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN (0x1<<12)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN_SHIFT 12
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN (0x1<<13)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN_SHIFT 13
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN (0x1<<14)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN_SHIFT 14
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN (0x1<<15)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN_SHIFT 15
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_vars2;
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG (0x1<<0)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG_SHIFT 0
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG (0x1<<1)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG_SHIFT 1
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF (0x3<<2)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_SHIFT 2
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF (0x3<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF (0x3<<8)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_SHIFT 8
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG (0x1<<10)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG_SHIFT 10
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<11)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 11
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN (0x1<<12)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN_SHIFT 12
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN (0x1<<13)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN_SHIFT 13
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN (0x1<<14)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN_SHIFT 14
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN (0x1<<15)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN_SHIFT 15
+	u16 __agg_val4;
+#endif
+	struct tstorm_tcp_tcp_ag_context_section tcp;
+};
+
+/*
+ * The iscsi aggregative context of Cstorm
+ */
+struct cstorm_iscsi_ag_context {
+	u32 agg_vars1;
+#define CSTORM_ISCSI_AG_CONTEXT_STATE (0xFF<<0)
+#define CSTORM_ISCSI_AG_CONTEXT_STATE_SHIFT 0
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<8)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 8
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<9)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 9
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<10)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 10
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<11)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 11
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_SE_CF_EN (0x1<<12)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_SE_CF_EN_SHIFT 12
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_INV_CF_EN (0x1<<13)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_INV_CF_EN_SHIFT 13
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF (0x3<<14)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF_SHIFT 14
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED66 (0x3<<16)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED66_SHIFT 16
+#define __CSTORM_ISCSI_AG_CONTEXT_FIN_RECEIVED_CF_EN (0x1<<18)
+#define __CSTORM_ISCSI_AG_CONTEXT_FIN_RECEIVED_CF_EN_SHIFT 18
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION0_CF_EN (0x1<<19)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION0_CF_EN_SHIFT 19
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION1_CF_EN (0x1<<20)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION1_CF_EN_SHIFT 20
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION2_CF_EN (0x1<<21)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION2_CF_EN_SHIFT 21
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF_EN (0x1<<22)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF_EN_SHIFT 22
+#define __CSTORM_ISCSI_AG_CONTEXT_REL_SEQ_RULE (0x7<<23)
+#define __CSTORM_ISCSI_AG_CONTEXT_REL_SEQ_RULE_SHIFT 23
+#define CSTORM_ISCSI_AG_CONTEXT_HQ_PROD_RULE (0x3<<26)
+#define CSTORM_ISCSI_AG_CONTEXT_HQ_PROD_RULE_SHIFT 26
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED52 (0x3<<28)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED52_SHIFT 28
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED53 (0x3<<30)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED53_SHIFT 30
+#if defined(__BIG_ENDIAN)
+	u8 __aux1_th;
+	u8 __aux1_val;
+	u16 __agg_vars2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_vars2;
+	u8 __aux1_val;
+	u8 __aux1_th;
+#endif
+	u32 rel_seq;
+	u32 rel_seq_th;
+#if defined(__BIG_ENDIAN)
+	u16 hq_cons;
+	u16 hq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_prod;
+	u16 hq_cons;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __reserved62;
+	u8 __reserved61;
+	u8 __reserved60;
+	u8 __reserved59;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __reserved59;
+	u8 __reserved60;
+	u8 __reserved61;
+	u8 __reserved62;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __reserved64;
+	u16 __cq_u_prod0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_u_prod0;
+	u16 __reserved64;
+#endif
+	u32 __cq_u_prod1;
+#if defined(__BIG_ENDIAN)
+	u16 __agg_vars3;
+	u16 __cq_u_prod2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_u_prod2;
+	u16 __agg_vars3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __aux2_th;
+	u16 __cq_u_prod3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_u_prod3;
+	u16 __aux2_th;
+#endif
+};
+
+/*
+ * The iscsi aggregative context of Ustorm
+ */
+struct ustorm_iscsi_ag_context {
+#if defined(__BIG_ENDIAN)
+	u8 __aux_counter_flags;
+	u8 agg_vars2;
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF (0x3<<0)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF (0x3<<2)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE (0x7<<4)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK_SHIFT 7
+	u8 agg_vars1;
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF (0x3<<4)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_SHIFT 4
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF (0x3<<6)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_SHIFT 6
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF (0x3<<4)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_SHIFT 4
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF (0x3<<6)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_SHIFT 6
+	u8 agg_vars2;
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF (0x3<<0)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF (0x3<<2)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE (0x7<<4)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK_SHIFT 7
+	u8 __aux_counter_flags;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cdu_usage;
+	u8 agg_misc2;
+	u16 __cq_local_comp_itt_val;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_local_comp_itt_val;
+	u8 agg_misc2;
+	u8 cdu_usage;
+#endif
+	u32 agg_misc4;
+#if defined(__BIG_ENDIAN)
+	u8 agg_val3_th;
+	u8 agg_val3;
+	u16 agg_misc3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_misc3;
+	u8 agg_val3;
+	u8 agg_val3_th;
+#endif
+	u32 agg_val1;
+	u32 agg_misc4_th;
+#if defined(__BIG_ENDIAN)
+	u16 agg_val2_th;
+	u16 agg_val2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_val2;
+	u16 agg_val2_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __reserved2;
+	u8 decision_rules;
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE (0x7<<0)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE (0x7<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1 (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1_SHIFT 7
+	u8 decision_rule_enable_bits;
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN (0x1<<0)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN_SHIFT 2
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN (0x1<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN (0x1<<4)
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN (0x1<<5)
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN_SHIFT 5
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+#elif defined(__LITTLE_ENDIAN)
+	u8 decision_rule_enable_bits;
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN (0x1<<0)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN_SHIFT 2
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN (0x1<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN (0x1<<4)
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN (0x1<<5)
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN_SHIFT 5
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+	u8 decision_rules;
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE (0x7<<0)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE (0x7<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1 (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1_SHIFT 7
+	u16 __reserved2;
+#endif
+};
+
+/*
+ * Timers connection context
+ */
+struct iscsi_timers_block_context {
+	u32 __reserved_0;
+	u32 __reserved_1;
+	u32 __reserved_2;
+	u32 flags;
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_NUM_OF_ACTIVE_TIMERS (0x3<<0)
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_NUM_OF_ACTIVE_TIMERS_SHIFT 0
+#define ISCSI_TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG (0x1<<2)
+#define ISCSI_TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG_SHIFT 2
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_RESERVED0 (0x1FFFFFFF<<3)
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_RESERVED0_SHIFT 3
+};
+
+/*
+ * Ethernet context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_eth_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_4;
+	u8 remote_addr_5;
+	u8 local_addr_0;
+	u8 local_addr_1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 local_addr_1;
+	u8 local_addr_0;
+	u8 remote_addr_5;
+	u8 remote_addr_4;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_0;
+	u8 remote_addr_1;
+	u8 remote_addr_2;
+	u8 remote_addr_3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_3;
+	u8 remote_addr_2;
+	u8 remote_addr_1;
+	u8 remote_addr_0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved_vlan_type;
+	u16 params;
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID (0xFFF<<0)
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID_SHIFT 0
+#define XSTORM_ETH_CONTEXT_SECTION_CFI (0x1<<12)
+#define XSTORM_ETH_CONTEXT_SECTION_CFI_SHIFT 12
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY (0x7<<13)
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY_SHIFT 13
+#elif defined(__LITTLE_ENDIAN)
+	u16 params;
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID (0xFFF<<0)
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID_SHIFT 0
+#define XSTORM_ETH_CONTEXT_SECTION_CFI (0x1<<12)
+#define XSTORM_ETH_CONTEXT_SECTION_CFI_SHIFT 12
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY (0x7<<13)
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY_SHIFT 13
+	u16 reserved_vlan_type;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 local_addr_2;
+	u8 local_addr_3;
+	u8 local_addr_4;
+	u8 local_addr_5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 local_addr_5;
+	u8 local_addr_4;
+	u8 local_addr_3;
+	u8 local_addr_2;
+#endif
+};
+
+/*
+ * IpV4 context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_ip_v4_context_section {
+#if defined(__BIG_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_id;
+	u16 __pbf_hdr_cmd_rsvd_flags_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_flags_offset;
+	u16 __pbf_hdr_cmd_rsvd_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __pbf_hdr_cmd_rsvd_ver_ihl;
+	u8 tos;
+	u16 __pbf_hdr_cmd_rsvd_length;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_length;
+	u8 tos;
+	u8 __pbf_hdr_cmd_rsvd_ver_ihl;
+#endif
+	u32 ip_local_addr;
+#if defined(__BIG_ENDIAN)
+	u8 ttl;
+	u8 __pbf_hdr_cmd_rsvd_protocol;
+	u16 __pbf_hdr_cmd_rsvd_csum;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_csum;
+	u8 __pbf_hdr_cmd_rsvd_protocol;
+	u8 ttl;
+#endif
+	u32 __pbf_hdr_cmd_rsvd_1;
+	u32 ip_remote_addr;
+};
+
+/*
+ * context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_padded_ip_v4_context_section {
+	struct xstorm_ip_v4_context_section ip_v4;
+	u32 reserved1[4];
+};
+
+/*
+ * IpV6 context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_ip_v6_context_section {
+#if defined(__BIG_ENDIAN)
+	u16 pbf_hdr_cmd_rsvd_payload_len;
+	u8 pbf_hdr_cmd_rsvd_nxt_hdr;
+	u8 hop_limit;
+#elif defined(__LITTLE_ENDIAN)
+	u8 hop_limit;
+	u8 pbf_hdr_cmd_rsvd_nxt_hdr;
+	u16 pbf_hdr_cmd_rsvd_payload_len;
+#endif
+	u32 priority_flow_label;
+#define XSTORM_IP_V6_CONTEXT_SECTION_FLOW_LABEL (0xFFFFF<<0)
+#define XSTORM_IP_V6_CONTEXT_SECTION_FLOW_LABEL_SHIFT 0
+#define XSTORM_IP_V6_CONTEXT_SECTION_TRAFFIC_CLASS (0xFF<<20)
+#define XSTORM_IP_V6_CONTEXT_SECTION_TRAFFIC_CLASS_SHIFT 20
+#define XSTORM_IP_V6_CONTEXT_SECTION_PBF_HDR_CMD_RSVD_VER (0xF<<28)
+#define XSTORM_IP_V6_CONTEXT_SECTION_PBF_HDR_CMD_RSVD_VER_SHIFT 28
+	u32 ip_local_addr_lo_hi;
+	u32 ip_local_addr_lo_lo;
+	u32 ip_local_addr_hi_hi;
+	u32 ip_local_addr_hi_lo;
+	u32 ip_remote_addr_lo_hi;
+	u32 ip_remote_addr_lo_lo;
+	u32 ip_remote_addr_hi_hi;
+	u32 ip_remote_addr_hi_lo;
+};
+
+union xstorm_ip_context_section_types {
+	struct xstorm_padded_ip_v4_context_section padded_ip_v4;
+	struct xstorm_ip_v6_context_section ip_v6;
+};
+
+/*
+ * TCP context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_tcp_context_section {
+	u32 snd_max;
+#if defined(__BIG_ENDIAN)
+	u16 remote_port;
+	u16 local_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_port;
+	u16 remote_port;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 original_nagle_1b;
+	u8 ts_enabled_1b;
+	u16 tcp_params;
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE (0xFF<<0)
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE_SHIFT 0
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT (0x1<<8)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT_SHIFT 8
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED (0x1<<9)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED_SHIFT 9
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED (0x1<<10)
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED_SHIFT 10
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE (0x1<<11)
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE_SHIFT 11
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<12)
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 12
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED (0x1<<13)
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED_SHIFT 13
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER (0x3<<14)
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 tcp_params;
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE (0xFF<<0)
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE_SHIFT 0
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT (0x1<<8)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT_SHIFT 8
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED (0x1<<9)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED_SHIFT 9
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED (0x1<<10)
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED_SHIFT 10
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE (0x1<<11)
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE_SHIFT 11
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<12)
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 12
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED (0x1<<13)
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED_SHIFT 13
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER (0x3<<14)
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER_SHIFT 14
+	u8 ts_enabled_1b;
+	u8 original_nagle_1b;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 pseudo_csum;
+	u16 window_scaling_factor;
+#elif defined(__LITTLE_ENDIAN)
+	u16 window_scaling_factor;
+	u16 pseudo_csum;
+#endif
+	u32 reserved2;
+	u32 ts_time_diff;
+	u32 __next_timer_expir;
+};
+
+/*
+ * Common context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_common_context_section {
+	struct xstorm_eth_context_section ethernet;
+	union xstorm_ip_context_section_types ip_union;
+	struct xstorm_tcp_context_section tcp;
+#if defined(__BIG_ENDIAN)
+	u16 reserved;
+	u8 statistics_params;
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS (0x1<<0)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS_SHIFT 0
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS (0x1<<1)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS_SHIFT 1
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID (0x1F<<2)
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID_SHIFT 2
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0 (0x1<<7)
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0_SHIFT 7
+	u8 ip_version_1b;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ip_version_1b;
+	u8 statistics_params;
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS (0x1<<0)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS_SHIFT 0
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS (0x1<<1)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS_SHIFT 1
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID (0x1F<<2)
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID_SHIFT 2
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0 (0x1<<7)
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0_SHIFT 7
+	u16 reserved;
+#endif
+};
+
+/*
+ * Flags used in ISCSI context section
+ */
+struct xstorm_iscsi_context_flags {
+	u8 flags;
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_IMMEDIATE_DATA (0x1<<0)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_IMMEDIATE_DATA_SHIFT 0
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_INITIAL_R2T (0x1<<1)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_INITIAL_R2T_SHIFT 1
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_HEADER_DIGEST (0x1<<2)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_HEADER_DIGEST_SHIFT 2
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_DATA_DIGEST (0x1<<3)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_DATA_DIGEST_SHIFT 3
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_HQ_BD_WRITTEN (0x1<<4)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_HQ_BD_WRITTEN_SHIFT 4
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_LAST_OP_SQ (0x1<<5)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_LAST_OP_SQ_SHIFT 5
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_UPDATE_SND_NXT (0x1<<6)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_UPDATE_SND_NXT_SHIFT 6
+#define XSTORM_ISCSI_CONTEXT_FLAGS_RESERVED4 (0x1<<7)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_RESERVED4_SHIFT 7
+};
+
+struct iscsi_task_context_entry_x {
+	u32 data_out_buffer_offset;
+	u32 itt;
+	u32 data_sn;
+};
+
+struct iscsi_task_context_entry_xuc_x_write_only {
+	u32 tx_r2t_sn;
+};
+
+struct iscsi_task_context_entry_xuc_xu_write_both {
+	u32 sgl_base_lo;
+	u32 sgl_base_hi;
+#if defined(__BIG_ENDIAN)
+	u8 sgl_size;
+	u8 sge_index;
+	u16 sge_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sge_offset;
+	u8 sge_index;
+	u8 sgl_size;
+#endif
+};
+
+/*
+ * iSCSI context section
+ */
+struct xstorm_iscsi_context_section {
+	u32 first_burst_length;
+	u32 max_send_pdu_length;
+	struct regpair sq_pbl_base;
+	struct regpair sq_curr_pbe;
+	struct regpair hq_pbl_base;
+	struct regpair hq_curr_pbe_base;
+	struct regpair r2tq_pbl_base;
+	struct regpair r2tq_curr_pbe_base;
+	struct regpair task_pbl_base;
+#if defined(__BIG_ENDIAN)
+	u16 data_out_count;
+	struct xstorm_iscsi_context_flags flags;
+	u8 task_pbl_cache_idx;
+#elif defined(__LITTLE_ENDIAN)
+	u8 task_pbl_cache_idx;
+	struct xstorm_iscsi_context_flags flags;
+	u16 data_out_count;
+#endif
+	u32 seq_more_2_send;
+	u32 pdu_more_2_send;
+	struct iscsi_task_context_entry_x temp_tce_x;
+	struct iscsi_task_context_entry_xuc_x_write_only temp_tce_x_wr;
+	struct iscsi_task_context_entry_xuc_xu_write_both temp_tce_xu_wr;
+	struct regpair lun;
+	u32 exp_data_transfer_len_ttt;
+	u32 pdu_data_2_rxmit;
+	u32 rxmit_bytes_2_dr;
+#if defined(__BIG_ENDIAN)
+	u16 rxmit_sge_offset;
+	u16 hq_rxmit_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_rxmit_cons;
+	u16 rxmit_sge_offset;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 r2tq_cons;
+	u8 rxmit_flags;
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD (0x1<<0)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD_SHIFT 0
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR (0x1<<1)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR_SHIFT 1
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU (0x1<<2)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU_SHIFT 2
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR (0x1<<3)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR_SHIFT 3
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR (0x1<<4)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR_SHIFT 4
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING (0x3<<5)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING_SHIFT 5
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT (0x1<<7)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT_SHIFT 7
+	u8 rxmit_sge_idx;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rxmit_sge_idx;
+	u8 rxmit_flags;
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD (0x1<<0)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD_SHIFT 0
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR (0x1<<1)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR_SHIFT 1
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU (0x1<<2)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU_SHIFT 2
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR (0x1<<3)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR_SHIFT 3
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR (0x1<<4)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR_SHIFT 4
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING (0x3<<5)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING_SHIFT 5
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT (0x1<<7)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT_SHIFT 7
+	u16 r2tq_cons;
+#endif
+	u32 hq_rxmit_tcp_seq;
+};
+
+/*
+ * Xstorm iSCSI Storm Context
+ */
+struct xstorm_iscsi_st_context {
+	struct xstorm_common_context_section common;
+	struct xstorm_iscsi_context_section iscsi;
+};
+
+/*
+ * CQ DB CQ producer and pending completion counter
+ */
+struct iscsi_cq_db_prod_pnd_cmpltn_cnt {
+#if defined(__BIG_ENDIAN)
+	u16 cntr;
+	u16 prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 prod;
+	u16 cntr;
+#endif
+};
+
+/*
+ * CQ DB pending completion ITT array
+ */
+struct iscsi_cq_db_prod_pnd_cmpltn_cnt_arr {
+	struct iscsi_cq_db_prod_pnd_cmpltn_cnt prod_pend_comp[8];
+};
+
+/*
+ * Cstorm CQ sequence to notify array, updated by driver
+ */
+struct iscsi_cq_db_sqn_2_notify_arr {
+	u16 sqn[8];
+};
+
+/*
+ * Cstorm iSCSI Storm Context
+ */
+struct cstorm_iscsi_st_context {
+	struct iscsi_cq_db_prod_pnd_cmpltn_cnt_arr cq_c_prod_pend_comp_ctr_arr;
+	struct iscsi_cq_db_sqn_2_notify_arr cq_c_prod_sqn_arr;
+	struct iscsi_cq_db_sqn_2_notify_arr cq_c_sqn_2_notify_arr;
+	struct regpair hq_pbl_base;
+	struct regpair hq_curr_pbe;
+	struct regpair task_pbl_base;
+	struct regpair cq_db_base;
+#if defined(__BIG_ENDIAN)
+	u16 hq_bd_itt;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	u16 hq_bd_itt;
+#endif
+	u32 hq_bd_data_segment_len;
+	u32 hq_bd_buffer_offset;
+#if defined(__BIG_ENDIAN)
+	u8 timer_entry_idx;
+	u8 cq_proc_en_bit_map;
+	u8 cq_pend_comp_itt_valid_bit_map;
+	u8 hq_bd_opcode;
+#elif defined(__LITTLE_ENDIAN)
+	u8 hq_bd_opcode;
+	u8 cq_pend_comp_itt_valid_bit_map;
+	u8 cq_proc_en_bit_map;
+	u8 timer_entry_idx;
+#endif
+	u32 hq_tcp_seq;
+#if defined(__BIG_ENDIAN)
+	u16 flags;
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN (0x1<<0)
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN_SHIFT 0
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN (0x1<<1)
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN_SHIFT 1
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID (0x1<<2)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID_SHIFT 2
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG (0x1<<3)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG_SHIFT 3
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK (0x1<<4)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK_SHIFT 4
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV (0x7FF<<5)
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV_SHIFT 5
+	u16 hq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_cons;
+	u16 flags;
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN (0x1<<0)
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN_SHIFT 0
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN (0x1<<1)
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN_SHIFT 1
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID (0x1<<2)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID_SHIFT 2
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG (0x1<<3)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG_SHIFT 3
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK (0x1<<4)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK_SHIFT 4
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV (0x7FF<<5)
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV_SHIFT 5
+#endif
+	struct regpair rsrv1;
+};
+
+/*
+ * Iscsi connection context
+ */
+struct iscsi_context {
+	struct ustorm_iscsi_st_context ustorm_st_context;
+	struct tstorm_iscsi_st_context tstorm_st_context;
+	struct xstorm_iscsi_ag_context xstorm_ag_context;
+	struct tstorm_iscsi_ag_context tstorm_ag_context;
+	struct cstorm_iscsi_ag_context cstorm_ag_context;
+	struct ustorm_iscsi_ag_context ustorm_ag_context;
+	struct iscsi_timers_block_context timers_context;
+	struct regpair upb_context;
+	struct xstorm_iscsi_st_context xstorm_st_context;
+	struct regpair xpb_context;
+	struct cstorm_iscsi_st_context cstorm_st_context;
+};
+
+/*
+ * Buffer per connection, used in Tstorm
+ */
+struct iscsi_conn_buf {
+	struct regpair reserved[8];
+};
+
+/*
+ * ipv6 structure
+ */
+struct ip_v6_addr {
+	u32 ip_addr_lo_lo;
+	u32 ip_addr_lo_hi;
+	u32 ip_addr_hi_lo;
+	u32 ip_addr_hi_hi;
+};
+
+/*
+ * l5cm- connection identification params
+ */
+struct l5cm_conn_addr_params {
+	u32 pmtu;
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_3;
+	u8 remote_addr_2;
+	u8 remote_addr_1;
+	u8 remote_addr_0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_0;
+	u8 remote_addr_1;
+	u8 remote_addr_2;
+	u8 remote_addr_3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 params;
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION (0x1<<0)
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION_SHIFT 0
+#define L5CM_CONN_ADDR_PARAMS_RSRV (0x7FFF<<1)
+#define L5CM_CONN_ADDR_PARAMS_RSRV_SHIFT 1
+	u8 remote_addr_5;
+	u8 remote_addr_4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_4;
+	u8 remote_addr_5;
+	u16 params;
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION (0x1<<0)
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION_SHIFT 0
+#define L5CM_CONN_ADDR_PARAMS_RSRV (0x7FFF<<1)
+#define L5CM_CONN_ADDR_PARAMS_RSRV_SHIFT 1
+#endif
+	struct ip_v6_addr local_ip_addr;
+	struct ip_v6_addr remote_ip_addr;
+	u32 ipv6_flow_label_20b;
+	u32 reserved1;
+#if defined(__BIG_ENDIAN)
+	u16 remote_tcp_port;
+	u16 local_tcp_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_tcp_port;
+	u16 remote_tcp_port;
+#endif
+};
+
+/*
+ * l5cm-xstorm connection buffer
+ */
+struct l5cm_xstorm_conn_buffer {
+#if defined(__BIG_ENDIAN)
+	u16 rsrv1;
+	u16 params;
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE (0x1<<0)
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE_SHIFT 0
+#define L5CM_XSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_XSTORM_CONN_BUFFER_RSRV_SHIFT 1
+#elif defined(__LITTLE_ENDIAN)
+	u16 params;
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE (0x1<<0)
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE_SHIFT 0
+#define L5CM_XSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_XSTORM_CONN_BUFFER_RSRV_SHIFT 1
+	u16 rsrv1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 mss;
+	u16 pseudo_header_checksum;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pseudo_header_checksum;
+	u16 mss;
+#endif
+	u32 rcv_buf;
+	u32 rsrv2;
+	struct regpair context_addr;
+};
+
+/*
+ * l5cm-tstorm connection buffer
+ */
+struct l5cm_tstorm_conn_buffer {
+	u32 snd_buf;
+	u32 rcv_buf;
+#if defined(__BIG_ENDIAN)
+	u16 params;
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE (0x1<<0)
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE_SHIFT 0
+#define L5CM_TSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_TSTORM_CONN_BUFFER_RSRV_SHIFT 1
+	u8 ka_max_probe_count;
+	u8 ka_enable;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_enable;
+	u8 ka_max_probe_count;
+	u16 params;
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE (0x1<<0)
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE_SHIFT 0
+#define L5CM_TSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_TSTORM_CONN_BUFFER_RSRV_SHIFT 1
+#endif
+	u32 ka_timeout;
+	u32 ka_interval;
+	u32 max_rt_time;
+};
+
+/*
+ * l5cm connection buffer for active side
+ */
+struct l5cm_active_conn_buffer {
+	struct l5cm_conn_addr_params conn_addr_buf;
+	struct l5cm_xstorm_conn_buffer xstorm_conn_buffer;
+	struct l5cm_tstorm_conn_buffer tstorm_conn_buffer;
+};
+
+/*
+ * l5cm slow path element
+ */
+struct l5cm_packet_size {
+	u32 size;
+	u32 rsrv;
+};
+
+/*
+ * l5cm connection parameters
+ */
+union l5cm_reduce_param_union {
+	u32 passive_side_scramble_key;
+	u32 pcs_id;
+};
+
+/*
+ * l5cm connection parameters
+ */
+struct l5cm_reduce_conn {
+	union l5cm_reduce_param_union param;
+	u32 isn;
+};
+
+/*
+ * l5cm slow path element
+ */
+union l5cm_specific_data {
+	u8 protocol_data[8];
+	struct regpair phy_address;
+	struct l5cm_packet_size packet_size;
+	struct l5cm_reduce_conn reduced_conn;
+};
+
+/*
+ * l5 slow path element
+ */
+struct l5cm_spe {
+	struct spe_hdr hdr;
+	union l5cm_specific_data data;
+};
+
+/*
+ * Tstorm Tcp flags
+ */
+struct tstorm_l5cm_tcp_flags {
+	u16 flags;
+#define TSTORM_L5CM_TCP_FLAGS_VLAN_ID (0xFFF<<0)
+#define TSTORM_L5CM_TCP_FLAGS_VLAN_ID_SHIFT 0
+#define TSTORM_L5CM_TCP_FLAGS_RSRV0 (0x1<<12)
+#define TSTORM_L5CM_TCP_FLAGS_RSRV0_SHIFT 12
+#define TSTORM_L5CM_TCP_FLAGS_TS_ENABLED (0x1<<13)
+#define TSTORM_L5CM_TCP_FLAGS_TS_ENABLED_SHIFT 13
+#define TSTORM_L5CM_TCP_FLAGS_RSRV1 (0x3<<14)
+#define TSTORM_L5CM_TCP_FLAGS_RSRV1_SHIFT 14
+};
+
+/*
+ * Xstorm Tcp flags
+ */
+struct xstorm_l5cm_tcp_flags {
+	u8 flags;
+#define XSTORM_L5CM_TCP_FLAGS_ENC_ENABLED (0x1<<0)
+#define XSTORM_L5CM_TCP_FLAGS_ENC_ENABLED_SHIFT 0
+#define XSTORM_L5CM_TCP_FLAGS_TS_ENABLED (0x1<<1)
+#define XSTORM_L5CM_TCP_FLAGS_TS_ENABLED_SHIFT 1
+#define XSTORM_L5CM_TCP_FLAGS_WND_SCL_EN (0x1<<2)
+#define XSTORM_L5CM_TCP_FLAGS_WND_SCL_EN_SHIFT 2
+#define XSTORM_L5CM_TCP_FLAGS_RSRV (0x1F<<3)
+#define XSTORM_L5CM_TCP_FLAGS_RSRV_SHIFT 3
+};
+
 #endif /* CNIC_DEFS_H */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index d8b09ef..8aaf98b 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.0.1"
-#define CNIC_MODULE_RELDATE	"Oct 01, 2009"
+#define CNIC_MODULE_VERSION	"2.1.0"
+#define CNIC_MODULE_RELDATE	"Oct 10, 2009"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
@@ -81,6 +81,8 @@
 #define DRV_CTL_CTX_WR_CMD		0x103
 #define DRV_CTL_CTXTBL_WR_CMD		0x104
 #define DRV_CTL_COMPLETION_CMD		0x105
+#define DRV_CTL_START_L2_CMD		0x106
+#define DRV_CTL_STOP_L2_CMD		0x107
 
 struct cnic_ctl_completion {
 	u32	cid;
@@ -105,11 +107,17 @@
 	dma_addr_t	dma_addr;
 };
 
+struct drv_ctl_l2_ring {
+	u32		client_id;
+	u32		cid;
+};
+
 struct drv_ctl_info {
 	int	cmd;
 	union {
 		struct drv_ctl_completion comp;
 		struct drv_ctl_io io;
+		struct drv_ctl_l2_ring ring;
 		char bytes[MAX_DRV_CTL_DATA];
 	} data;
 };
@@ -143,6 +151,7 @@
 	u32		max_kwqe_pending;
 	struct pci_dev	*pdev;
 	void __iomem	*io_base;
+	void __iomem	*io_base2;
 
 	u32		ctx_tbl_offset;
 	u32		ctx_tbl_len;
@@ -298,5 +307,6 @@
 extern int cnic_unregister_driver(int ulp_type);
 
 extern struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev);
+extern struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev);
 
 #endif
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 61f9da2..6782223 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -380,9 +380,8 @@
 		return NULL;
 	}
 
-	skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
+	skb = netdev_alloc_skb_ip_align(priv->dev, CPMAC_SKB_SIZE);
 	if (likely(skb)) {
-		skb_reserve(skb, 2);
 		skb_put(desc->skb, desc->datalen);
 		desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
 		desc->skb->ip_summed = CHECKSUM_NONE;
@@ -991,12 +990,11 @@
 
 	priv->rx_head = &priv->desc_ring[CPMAC_QUEUES];
 	for (i = 0, desc = priv->rx_head; i < priv->ring_size; i++, desc++) {
-		skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
+		skb = netdev_alloc_skb_ip_align(dev, CPMAC_SKB_SIZE);
 		if (unlikely(!skb)) {
 			res = -ENOMEM;
 			goto fail_desc;
 		}
-		skb_reserve(skb, 2);
 		desc->skb = skb;
 		desc->data_mapping = dma_map_single(&dev->dev, skb->data,
 						    CPMAC_SKB_SIZE,
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 0c54219..af93216 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1323,7 +1323,7 @@
 		writereg(dev, PP_BusCTL, ENABLE_IRQ | MEMORY_ON);
 #endif
 		write_irq(dev, lp->chip_type, dev->irq);
-		ret = request_irq(dev->irq, &net_interrupt, 0, dev->name, dev);
+		ret = request_irq(dev->irq, net_interrupt, 0, dev->name, dev);
 		if (ret) {
 			if (net_debug)
 				printk(KERN_DEBUG "cs89x0: request_irq(%d) failed\n", dev->irq);
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 2b1aea6..3e8618b 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -48,12 +48,27 @@
 struct vlan_group;
 struct adapter;
 struct sge_qset;
+struct port_info;
 
 enum {			/* rx_offload flags */
 	T3_RX_CSUM	= 1 << 0,
 	T3_LRO		= 1 << 1,
 };
 
+enum mac_idx_types {
+	LAN_MAC_IDX	= 0,
+	SAN_MAC_IDX,
+
+	MAX_MAC_IDX
+};
+
+struct iscsi_config {
+	__u8	mac_addr[ETH_ALEN];
+	__u32	flags;
+	int (*send)(struct port_info *pi, struct sk_buff **skb);
+	int (*recv)(struct port_info *pi, struct sk_buff *skb);
+};
+
 struct port_info {
 	struct adapter *adapter;
 	struct vlan_group *vlan_grp;
@@ -68,6 +83,7 @@
 	struct net_device_stats netstats;
 	int activity;
 	__be32 iscsi_ipv4addr;
+	struct iscsi_config iscsic;
 
 	int link_fault; /* link fault was detected */
 };
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 1b2c305..6ff356d 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -125,11 +125,9 @@
 	IRQ_NUM_STATS		/* keep last */
 };
 
-enum {
-	TP_VERSION_MAJOR	= 1,
-	TP_VERSION_MINOR	= 1,
-	TP_VERSION_MICRO	= 0
-};
+#define TP_VERSION_MAJOR	1
+#define TP_VERSION_MINOR	1
+#define TP_VERSION_MICRO	0
 
 #define S_TP_VERSION_MAJOR		16
 #define M_TP_VERSION_MAJOR		0xFF
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 34e776c..cef3f88 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -44,6 +44,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/firmware.h>
 #include <linux/log2.h>
+#include <linux/stringify.h>
 #include <asm/uaccess.h>
 
 #include "common.h"
@@ -344,8 +345,10 @@
 
 	init_rx_mode(&rm, dev, dev->mc_list);
 	t3_mac_reset(mac);
+	t3_mac_set_num_ucast(mac, MAX_MAC_IDX);
 	t3_mac_set_mtu(mac, dev->mtu);
-	t3_mac_set_address(mac, 0, dev->dev_addr);
+	t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr);
+	t3_mac_set_address(mac, SAN_MAC_IDX, pi->iscsic.mac_addr);
 	t3_mac_set_rx_mode(mac, &rm);
 	t3_link_start(&pi->phy, mac, &pi->link_config);
 	t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
@@ -903,6 +906,7 @@
 static int write_smt_entry(struct adapter *adapter, int idx)
 {
 	struct cpl_smt_write_req *req;
+	struct port_info *pi = netdev_priv(adapter->port[idx]);
 	struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL);
 
 	if (!skb)
@@ -913,8 +917,8 @@
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx));
 	req->mtu_idx = NMTUS - 1;	/* should be 0 but there's a T3 bug */
 	req->iff = idx;
-	memset(req->src_mac1, 0, sizeof(req->src_mac1));
 	memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN);
+	memcpy(req->src_mac1, pi->iscsic.mac_addr, ETH_ALEN);
 	skb->priority = 1;
 	offload_tx(&adapter->tdev, skb);
 	return 0;
@@ -989,11 +993,21 @@
 	return err;
 }
 
-#define FW_FNAME "cxgb3/t3fw-%d.%d.%d.bin"
-#define TPSRAM_NAME "cxgb3/t3%c_psram-%d.%d.%d.bin"
+#define FW_VERSION __stringify(FW_VERSION_MAJOR) "."			\
+	__stringify(FW_VERSION_MINOR) "." __stringify(FW_VERSION_MICRO)
+#define FW_FNAME "cxgb3/t3fw-" FW_VERSION ".bin"
+#define TPSRAM_VERSION __stringify(TP_VERSION_MAJOR) "."		\
+	__stringify(TP_VERSION_MINOR) "." __stringify(TP_VERSION_MICRO)
+#define TPSRAM_NAME "cxgb3/t3%c_psram-" TPSRAM_VERSION ".bin"
 #define AEL2005_OPT_EDC_NAME "cxgb3/ael2005_opt_edc.bin"
 #define AEL2005_TWX_EDC_NAME "cxgb3/ael2005_twx_edc.bin"
 #define AEL2020_TWX_EDC_NAME "cxgb3/ael2020_twx_edc.bin"
+MODULE_FIRMWARE(FW_FNAME);
+MODULE_FIRMWARE("cxgb3/t3b_psram-" TPSRAM_VERSION ".bin");
+MODULE_FIRMWARE("cxgb3/t3c_psram-" TPSRAM_VERSION ".bin");
+MODULE_FIRMWARE(AEL2005_OPT_EDC_NAME);
+MODULE_FIRMWARE(AEL2005_TWX_EDC_NAME);
+MODULE_FIRMWARE(AEL2020_TWX_EDC_NAME);
 
 static inline const char *get_edc_fw_name(int edc_idx)
 {
@@ -1064,16 +1078,13 @@
 static int upgrade_fw(struct adapter *adap)
 {
 	int ret;
-	char buf[64];
 	const struct firmware *fw;
 	struct device *dev = &adap->pdev->dev;
 
-	snprintf(buf, sizeof(buf), FW_FNAME, FW_VERSION_MAJOR,
-		 FW_VERSION_MINOR, FW_VERSION_MICRO);
-	ret = request_firmware(&fw, buf, dev);
+	ret = request_firmware(&fw, FW_FNAME, dev);
 	if (ret < 0) {
 		dev_err(dev, "could not upgrade firmware: unable to load %s\n",
-			buf);
+			FW_FNAME);
 		return ret;
 	}
 	ret = t3_load_fw(adap, fw->data, fw->size);
@@ -1117,8 +1128,7 @@
 	if (!rev)
 		return 0;
 
-	snprintf(buf, sizeof(buf), TPSRAM_NAME, rev,
-		 TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO);
+	snprintf(buf, sizeof(buf), TPSRAM_NAME, rev);
 
 	ret = request_firmware(&tpsram, buf, dev);
 	if (ret < 0) {
@@ -2107,19 +2117,19 @@
 		if (t.qset_idx >= SGE_QSETS)
 			return -EINVAL;
 		if (!in_range(t.intr_lat, 0, M_NEWTIMER) ||
-			!in_range(t.cong_thres, 0, 255) ||
-			!in_range(t.txq_size[0], MIN_TXQ_ENTRIES,
-				MAX_TXQ_ENTRIES) ||
-			!in_range(t.txq_size[1], MIN_TXQ_ENTRIES,
-				MAX_TXQ_ENTRIES) ||
-			!in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES,
-				MAX_CTRL_TXQ_ENTRIES) ||
-			!in_range(t.fl_size[0], MIN_FL_ENTRIES,
-				MAX_RX_BUFFERS)
-			|| !in_range(t.fl_size[1], MIN_FL_ENTRIES,
-					MAX_RX_JUMBO_BUFFERS)
-			|| !in_range(t.rspq_size, MIN_RSPQ_ENTRIES,
-					MAX_RSPQ_ENTRIES))
+		    !in_range(t.cong_thres, 0, 255) ||
+		    !in_range(t.txq_size[0], MIN_TXQ_ENTRIES,
+			      MAX_TXQ_ENTRIES) ||
+		    !in_range(t.txq_size[1], MIN_TXQ_ENTRIES,
+			      MAX_TXQ_ENTRIES) ||
+		    !in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES,
+			      MAX_CTRL_TXQ_ENTRIES) ||
+		    !in_range(t.fl_size[0], MIN_FL_ENTRIES,
+			      MAX_RX_BUFFERS) ||
+		    !in_range(t.fl_size[1], MIN_FL_ENTRIES,
+			      MAX_RX_JUMBO_BUFFERS) ||
+		    !in_range(t.rspq_size, MIN_RSPQ_ENTRIES,
+			      MAX_RSPQ_ENTRIES))
 			return -EINVAL;
 
 		if ((adapter->flags & FULL_INIT_DONE) && t.lro > 0)
@@ -2516,7 +2526,7 @@
 		return -EINVAL;
 
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-	t3_mac_set_address(&pi->mac, 0, dev->dev_addr);
+	t3_mac_set_address(&pi->mac, LAN_MAC_IDX, dev->dev_addr);
 	if (offload_running(adapter))
 		write_smt_entry(adapter, pi->port_id);
 	return 0;
@@ -2654,7 +2664,7 @@
 			struct cmac *mac = &p->mac;
 
 			t3_mac_set_mtu(mac, dev->mtu);
-			t3_mac_set_address(mac, 0, dev->dev_addr);
+			t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr);
 			cxgb_set_rxmode(dev);
 			t3_link_start(&p->phy, mac, &p->link_config);
 			t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
@@ -3112,6 +3122,14 @@
 #endif
 };
 
+static void __devinit cxgb3_init_iscsi_mac(struct net_device *dev)
+{
+	struct port_info *pi = netdev_priv(dev);
+
+	memcpy(pi->iscsic.mac_addr, dev->dev_addr, ETH_ALEN);
+	pi->iscsic.mac_addr[3] |= 0x80;
+}
+
 static int __devinit init_one(struct pci_dev *pdev,
 			      const struct pci_device_id *ent)
 {
@@ -3270,6 +3288,9 @@
 		goto out_free_dev;
 	}
 
+	for_each_port(adapter, i)
+		cxgb3_init_iscsi_mac(adapter->port[i]);
+
 	/* Driver's ready. Reflect it on LEDs */
 	t3_led_ready(adapter);
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 6366061..49f3de7 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1260,7 +1260,7 @@
 		if (should_restart_tx(q) &&
 		    test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
 			q->restarts++;
-			netif_tx_wake_queue(txq);
+			netif_tx_start_queue(txq);
 		}
 	}
 
@@ -1946,10 +1946,9 @@
  *	Check if the ARP request is probing the private IP address
  *	dedicated to iSCSI, generate an ARP reply if so.
  */
-static void cxgb3_arp_process(struct adapter *adapter, struct sk_buff *skb)
+static void cxgb3_arp_process(struct port_info *pi, struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
-	struct port_info *pi;
 	struct arphdr *arp;
 	unsigned char *arp_ptr;
 	unsigned char *sha;
@@ -1972,12 +1971,11 @@
 	arp_ptr += dev->addr_len;
 	memcpy(&tip, arp_ptr, sizeof(tip));
 
-	pi = netdev_priv(dev);
 	if (tip != pi->iscsi_ipv4addr)
 		return;
 
 	arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
-		 dev->dev_addr, sha);
+		 pi->iscsic.mac_addr, sha);
 
 }
 
@@ -1986,6 +1984,19 @@
 	return skb->protocol == htons(ETH_P_ARP);
 }
 
+static void cxgb3_process_iscsi_prov_pack(struct port_info *pi,
+					struct sk_buff *skb)
+{
+	if (is_arp(skb)) {
+		cxgb3_arp_process(pi, skb);
+		return;
+	}
+
+	if (pi->iscsic.recv)
+		pi->iscsic.recv(pi, skb);
+
+}
+
 /**
  *	rx_eth - process an ingress ethernet packet
  *	@adap: the adapter
@@ -2024,13 +2035,12 @@
 				vlan_gro_receive(&qs->napi, grp,
 						 ntohs(p->vlan), skb);
 			else {
-				if (unlikely(pi->iscsi_ipv4addr &&
-				    is_arp(skb))) {
+				if (unlikely(pi->iscsic.flags)) {
 					unsigned short vtag = ntohs(p->vlan) &
 								VLAN_VID_MASK;
 					skb->dev = vlan_group_get_device(grp,
 									 vtag);
-					cxgb3_arp_process(adap, skb);
+					cxgb3_process_iscsi_prov_pack(pi, skb);
 				}
 				__vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
 					  	  rq->polling);
@@ -2041,8 +2051,8 @@
 		if (lro)
 			napi_gro_receive(&qs->napi, skb);
 		else {
-			if (unlikely(pi->iscsi_ipv4addr && is_arp(skb)))
-				cxgb3_arp_process(adap, skb);
+			if (unlikely(pi->iscsic.flags))
+				cxgb3_process_iscsi_prov_pack(pi, skb);
 			netif_receive_skb(skb);
 		}
 	} else
@@ -2125,6 +2135,7 @@
 	if (!complete)
 		return;
 
+	skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	cpl = qs->lro_va;
 
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index db63803..8edac89 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -164,16 +164,14 @@
 # define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
 
 /* EMAC mac_control register */
-#define EMAC_MACCONTROL_TXPTYPE		(0x200)
-#define EMAC_MACCONTROL_TXPACEEN	(0x40)
-#define EMAC_MACCONTROL_MIIEN		(0x20)
-#define EMAC_MACCONTROL_GIGABITEN	(0x80)
-#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
-#define EMAC_MACCONTROL_FULLDUPLEXEN	(0x1)
+#define EMAC_MACCONTROL_TXPTYPE		BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN	BIT(6)
+#define EMAC_MACCONTROL_GMIIEN		BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN	BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	BIT(0)
 #define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
 
 /* GIGABIT MODE related bits */
-#define EMAC_DM646X_MACCONTORL_GMIIEN	BIT(5)
 #define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
 #define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
 
@@ -192,10 +190,10 @@
 #define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
 
 /* MAC_IN_VECTOR (0x180) register bit fields */
-#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	      (0x20000)
-#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	      (0x10000)
-#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	      (0x0100)
-#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	      (0x01)
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	BIT(0)
 
 /** NOTE:: For DM646x the IN_VECTOR has changed */
 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
@@ -203,7 +201,6 @@
 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT	BIT(26)
 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT	BIT(27)
 
-
 /* CPPI bit positions */
 #define EMAC_CPPI_SOP_BIT		BIT(31)
 #define EMAC_CPPI_EOP_BIT		BIT(30)
@@ -750,8 +747,7 @@
 
 	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
 		mac_control = emac_read(EMAC_MACCONTROL);
-		mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
-				EMAC_DM646X_MACCONTORL_GIG |
+		mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
 				EMAC_DM646X_MACCONTORL_GIGFORCE);
 	} else {
 		/* Clear the GIG bit and GIGFORCE bit */
@@ -2108,7 +2104,7 @@
 
 	/* Enable MII */
 	val = emac_read(EMAC_MACCONTROL);
-	val |= (EMAC_MACCONTROL_MIIEN);
+	val |= (EMAC_MACCONTROL_GMIIEN);
 	emac_write(EMAC_MACCONTROL, val);
 
 	/* Enable NAPI and interrupts */
@@ -2807,11 +2803,33 @@
 	return 0;
 }
 
+static
+int davinci_emac_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (netif_running(dev))
+		emac_dev_stop(dev);
+
+	clk_disable(emac_clk);
+
+	return 0;
+}
+
+static int davinci_emac_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	clk_enable(emac_clk);
+
+	if (netif_running(dev))
+		emac_dev_open(dev);
+
+	return 0;
+}
+
 /**
  * davinci_emac_driver: EMAC platform driver structure
- *
- * We implement only probe and remove functions - suspend/resume and
- * others not supported by this module
  */
 static struct platform_driver davinci_emac_driver = {
 	.driver = {
@@ -2820,6 +2838,8 @@
 	},
 	.probe = davinci_emac_probe,
 	.remove = __devexit_p(davinci_emac_remove),
+	.suspend = davinci_emac_suspend,
+	.resume = davinci_emac_resume,
 };
 
 /**
diff --git a/drivers/net/declance.c b/drivers/net/declance.c
index a31696a..be95902 100644
--- a/drivers/net/declance.c
+++ b/drivers/net/declance.c
@@ -801,14 +801,14 @@
 	netif_start_queue(dev);
 
 	/* Associate IRQ with lance_interrupt */
-	if (request_irq(dev->irq, &lance_interrupt, 0, "lance", dev)) {
+	if (request_irq(dev->irq, lance_interrupt, 0, "lance", dev)) {
 		printk("%s: Can't get IRQ %d\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
 	if (lp->dma_irq >= 0) {
 		unsigned long flags;
 
-		if (request_irq(lp->dma_irq, &lance_dma_merr_int, 0,
+		if (request_irq(lp->dma_irq, lance_dma_merr_int, 0,
 				"lance error", dev)) {
 			free_irq(dev->irq, dev);
 			printk("%s: Can't get DMA IRQ %d\n", dev->name,
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 7a3bdac..0c1f491 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -849,7 +849,7 @@
 
 	depca_dbg_open(dev);
 
-	if (request_irq(dev->irq, &depca_interrupt, 0, lp->adapter_name, dev)) {
+	if (request_irq(dev->irq, depca_interrupt, 0, lp->adapter_name, dev)) {
 		printk("depca_open(): Requested IRQ%d is busy\n", dev->irq);
 		status = -EAGAIN;
 	} else {
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 7fa7a90..2a8b6a7 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -163,8 +163,8 @@
 			    strcmp (media[card_idx], "4") == 0) {
 				np->speed = 100;
 				np->full_duplex = 1;
-			} else if (strcmp (media[card_idx], "100mbps_hd") == 0
-				   || strcmp (media[card_idx], "3") == 0) {
+			} else if (strcmp (media[card_idx], "100mbps_hd") == 0 ||
+				   strcmp (media[card_idx], "3") == 0) {
 				np->speed = 100;
 				np->full_duplex = 0;
 			} else if (strcmp (media[card_idx], "10mbps_fd") == 0 ||
@@ -411,7 +411,7 @@
 	int i;
 	u16 macctrl;
 
-	i = request_irq (dev->irq, &rio_interrupt, IRQF_SHARED, dev->name, dev);
+	i = request_irq (dev->irq, rio_interrupt, IRQF_SHARED, dev->name, dev);
 	if (i)
 		return i;
 
@@ -505,7 +505,8 @@
 			entry = np->old_rx % RX_RING_SIZE;
 			/* Dropped packets don't need to re-allocate */
 			if (np->rx_skbuff[entry] == NULL) {
-				skb = netdev_alloc_skb (dev, np->rx_buf_sz);
+				skb = netdev_alloc_skb_ip_align(dev,
+								np->rx_buf_sz);
 				if (skb == NULL) {
 					np->rx_ring[entry].fraginfo = 0;
 					printk (KERN_INFO
@@ -514,8 +515,6 @@
 					break;
 				}
 				np->rx_skbuff[entry] = skb;
-				/* 16 byte align the IP header */
-				skb_reserve (skb, 2);
 				np->rx_ring[entry].fraginfo =
 				    cpu_to_le64 (pci_map_single
 					 (np->pdev, skb->data, np->rx_buf_sz,
@@ -576,7 +575,9 @@
 	/* Allocate the rx buffers */
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		/* Allocated fixed size of skbuff */
-		struct sk_buff *skb = netdev_alloc_skb (dev, np->rx_buf_sz);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz);
 		np->rx_skbuff[i] = skb;
 		if (skb == NULL) {
 			printk (KERN_ERR
@@ -584,7 +585,6 @@
 				dev->name);
 			break;
 		}
-		skb_reserve (skb, 2);	/* 16 byte align the IP header. */
 		/* Rubicon now supports 40 bits of addressing space. */
 		np->rx_ring[i].fraginfo =
 		    cpu_to_le64 ( pci_map_single (
@@ -871,13 +871,11 @@
 						  PCI_DMA_FROMDEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
 				np->rx_skbuff[entry] = NULL;
-			} else if ((skb = netdev_alloc_skb(dev, pkt_len + 2))) {
+			} else if ((skb = netdev_alloc_skb_ip_align(dev, pkt_len))) {
 				pci_dma_sync_single_for_cpu(np->pdev,
 							    desc_to_dma(desc),
 							    np->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
-				/* 16 byte align the IP header */
-				skb_reserve (skb, 2);
 				skb_copy_to_linear_data (skb,
 						  np->rx_skbuff[entry]->data,
 						  pkt_len);
@@ -907,7 +905,7 @@
 		struct sk_buff *skb;
 		/* Dropped packets don't need to re-allocate */
 		if (np->rx_skbuff[entry] == NULL) {
-			skb = netdev_alloc_skb(dev, np->rx_buf_sz);
+			skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz);
 			if (skb == NULL) {
 				np->rx_ring[entry].fraginfo = 0;
 				printk (KERN_INFO
@@ -917,8 +915,6 @@
 				break;
 			}
 			np->rx_skbuff[entry] = skb;
-			/* 16 byte align the IP header */
-			skb_reserve (skb, 2);
 			np->rx_ring[entry].fraginfo =
 			    cpu_to_le64 (pci_map_single
 					 (np->pdev, skb->data, np->rx_buf_sz,
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 31b8bef..0cbe3c0 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -100,6 +100,7 @@
 
 	unsigned int	flags;
 	unsigned int	in_suspend :1;
+	unsigned int	wake_supported :1;
 	int		debug_level;
 
 	enum dm9000_type type;
@@ -116,6 +117,8 @@
 	struct resource *data_req;
 	struct resource *irq_res;
 
+	int		 irq_wake;
+
 	struct mutex	 addr_lock;	/* phy and eeprom access lock */
 
 	struct delayed_work phy_poll;
@@ -125,6 +128,7 @@
 
 	struct mii_if_info mii;
 	u32		msg_enable;
+	u32		wake_state;
 
 	int		rx_csum;
 	int		can_csum;
@@ -568,6 +572,54 @@
 	return 0;
 }
 
+static void dm9000_get_wol(struct net_device *dev, struct ethtool_wolinfo *w)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+
+	memset(w, 0, sizeof(struct ethtool_wolinfo));
+
+	/* note, we could probably support wake-phy too */
+	w->supported = dm->wake_supported ? WAKE_MAGIC : 0;
+	w->wolopts = dm->wake_state;
+}
+
+static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w)
+{
+	board_info_t *dm = to_dm9000_board(dev);
+	unsigned long flags;
+	u32 opts = w->wolopts;
+	u32 wcr = 0;
+
+	if (!dm->wake_supported)
+		return -EOPNOTSUPP;
+
+	if (opts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	if (opts & WAKE_MAGIC)
+		wcr |= WCR_MAGICEN;
+
+	mutex_lock(&dm->addr_lock);
+
+	spin_lock_irqsave(&dm->lock, flags);
+	iow(dm, DM9000_WCR, wcr);
+	spin_unlock_irqrestore(&dm->lock, flags);
+
+	mutex_unlock(&dm->addr_lock);
+
+	if (dm->wake_state != opts) {
+		/* change in wol state, update IRQ state */
+
+		if (!dm->wake_state)
+			set_irq_wake(dm->irq_wake, 1);
+		else if (dm->wake_state & !opts)
+			set_irq_wake(dm->irq_wake, 0);
+	}
+
+	dm->wake_state = opts;
+	return 0;
+}
+
 static const struct ethtool_ops dm9000_ethtool_ops = {
 	.get_drvinfo		= dm9000_get_drvinfo,
 	.get_settings		= dm9000_get_settings,
@@ -576,6 +628,8 @@
 	.set_msglevel		= dm9000_set_msglevel,
 	.nway_reset		= dm9000_nway_reset,
 	.get_link		= dm9000_get_link,
+	.get_wol		= dm9000_get_wol,
+	.set_wol		= dm9000_set_wol,
  	.get_eeprom_len		= dm9000_get_eeprom_len,
  	.get_eeprom		= dm9000_get_eeprom,
  	.set_eeprom		= dm9000_set_eeprom,
@@ -722,6 +776,7 @@
 {
 	board_info_t *db = netdev_priv(dev);
 	unsigned int imr;
+	unsigned int ncr;
 
 	dm9000_dbg(db, 1, "entering %s\n", __func__);
 
@@ -736,8 +791,15 @@
 	iow(db, DM9000_GPCR, GPCR_GEP_CNTL);	/* Let GPIO0 output */
 	iow(db, DM9000_GPR, 0);	/* Enable PHY */
 
-	if (db->flags & DM9000_PLATF_EXT_PHY)
-		iow(db, DM9000_NCR, NCR_EXT_PHY);
+	ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0;
+
+	/* if wol is needed, then always set NCR_WAKEEN otherwise we end
+	 * up dumping the wake events if we disable this. There is already
+	 * a wake-mask in DM9000_WCR */
+	if (db->wake_supported)
+		ncr |= NCR_WAKEEN;
+
+	iow(db, DM9000_NCR, ncr);
 
 	/* Program operating register */
 	iow(db, DM9000_TCR, 0);	        /* TX Polling clear */
@@ -962,8 +1024,8 @@
 		}
 
 		/* Move data from DM9000 */
-		if (GoodPacket
-		    && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) {
+		if (GoodPacket &&
+		    ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) {
 			skb_reserve(skb, 2);
 			rdptr = (u8 *) skb_put(skb, RxLen - 4);
 
@@ -1045,6 +1107,41 @@
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t dm9000_wol_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = dev_id;
+	board_info_t *db = netdev_priv(dev);
+	unsigned long flags;
+	unsigned nsr, wcr;
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	nsr = ior(db, DM9000_NSR);
+	wcr = ior(db, DM9000_WCR);
+
+	dev_dbg(db->dev, "%s: NSR=0x%02x, WCR=0x%02x\n", __func__, nsr, wcr);
+
+	if (nsr & NSR_WAKEST) {
+		/* clear, so we can avoid */
+		iow(db, DM9000_NSR, NSR_WAKEST);
+
+		if (wcr & WCR_LINKST)
+			dev_info(db->dev, "wake by link status change\n");
+		if (wcr & WCR_SAMPLEST)
+			dev_info(db->dev, "wake by sample packet\n");
+		if (wcr & WCR_MAGICST )
+			dev_info(db->dev, "wake by magic packet\n");
+		if (!(wcr & (WCR_LINKST | WCR_SAMPLEST | WCR_MAGICST)))
+			dev_err(db->dev, "wake signalled with no reason? "
+				"NSR=0x%02x, WSR=0x%02x\n", nsr, wcr);
+
+	}
+
+	spin_unlock_irqrestore(&db->lock, flags);
+
+	return (nsr & NSR_WAKEST) ? IRQ_HANDLED : IRQ_NONE;
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  *Used by netconsole
@@ -1078,7 +1175,7 @@
 
 	irqflags |= IRQF_SHARED;
 
-	if (request_irq(dev->irq, &dm9000_interrupt, irqflags, dev->name, dev))
+	if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
 		return -EAGAIN;
 
 	/* Initialize DM9000 board */
@@ -1299,6 +1396,29 @@
 		goto out;
 	}
 
+	db->irq_wake = platform_get_irq(pdev, 1);
+	if (db->irq_wake >= 0) {
+		dev_dbg(db->dev, "wakeup irq %d\n", db->irq_wake);
+
+		ret = request_irq(db->irq_wake, dm9000_wol_interrupt,
+				  IRQF_SHARED, dev_name(db->dev), ndev);
+		if (ret) {
+			dev_err(db->dev, "cannot get wakeup irq (%d)\n", ret);
+		} else {
+
+			/* test to see if irq is really wakeup capable */
+			ret = set_irq_wake(db->irq_wake, 1);
+			if (ret) {
+				dev_err(db->dev, "irq %d cannot set wakeup (%d)\n",
+					db->irq_wake, ret);
+				ret = 0;
+			} else {
+				set_irq_wake(db->irq_wake, 0);
+				db->wake_supported = 1;
+			}
+		}
+	}
+
 	iosize = resource_size(db->addr_res);
 	db->addr_req = request_mem_region(db->addr_res->start, iosize,
 					  pdev->name);
@@ -1490,10 +1610,14 @@
 		db = netdev_priv(ndev);
 		db->in_suspend = 1;
 
-		if (netif_running(ndev)) {
-			netif_device_detach(ndev);
+		if (!netif_running(ndev))
+			return 0;
+
+		netif_device_detach(ndev);
+
+		/* only shutdown if not using WoL */
+		if (!db->wake_state)
 			dm9000_shutdown(ndev);
-		}
 	}
 	return 0;
 }
@@ -1506,10 +1630,13 @@
 	board_info_t *db = netdev_priv(ndev);
 
 	if (ndev) {
-
 		if (netif_running(ndev)) {
-			dm9000_reset(db);
-			dm9000_init_dm9000(ndev);
+			/* reset if we were not in wake mode to ensure if
+			 * the device was powered off it is in a known state */
+			if (!db->wake_state) {
+				dm9000_reset(db);
+				dm9000_init_dm9000(ndev);
+			}
 
 			netif_device_attach(ndev);
 		}
diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h
index fb1c924d..55688bd 100644
--- a/drivers/net/dm9000.h
+++ b/drivers/net/dm9000.h
@@ -111,6 +111,13 @@
 #define RSR_CE              (1<<1)
 #define RSR_FOE             (1<<0)
 
+#define WCR_LINKEN		(1 << 5)
+#define WCR_SAMPLEEN		(1 << 4)
+#define WCR_MAGICEN		(1 << 3)
+#define WCR_LINKST		(1 << 2)
+#define WCR_SAMPLEST		(1 << 1)
+#define WCR_MAGICST		(1 << 0)
+
 #define FCTR_HWOT(ot)	(( ot & 0xf ) << 4 )
 #define FCTR_LWOT(ot)	( ot & 0xf )
 
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3c29a20..929701c 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -157,6 +157,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/mii.h>
@@ -602,6 +603,7 @@
 	struct mem *mem;
 	dma_addr_t dma_addr;
 
+	struct pci_pool *cbs_pool;
 	dma_addr_t cbs_dma_addr;
 	u8 adaptive_ifs;
 	u8 tx_threshold;
@@ -622,6 +624,7 @@
 	u16 eeprom_wc;
 	__le16 eeprom[256];
 	spinlock_t mdio_lock;
+	const struct firmware *fw;
 };
 
 static inline void e100_write_flush(struct nic *nic)
@@ -1223,9 +1226,9 @@
 static const struct firmware *e100_request_firmware(struct nic *nic)
 {
 	const char *fw_name;
-	const struct firmware *fw;
+	const struct firmware *fw = nic->fw;
 	u8 timer, bundle, min_size;
-	int err;
+	int err = 0;
 
 	/* do not load u-code for ICH devices */
 	if (nic->flags & ich)
@@ -1241,12 +1244,20 @@
 	else /* No ucode on other devices */
 		return NULL;
 
-	err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+	/* If the firmware has not previously been loaded, request a pointer
+	 * to it. If it was previously loaded, we are reinitializing the
+	 * adapter, possibly in a resume from hibernate, in which case
+	 * request_firmware() cannot be used.
+	 */
+	if (!fw)
+		err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+
 	if (err) {
 		DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
 			fw_name, err);
 		return ERR_PTR(err);
 	}
+
 	/* Firmware should be precisely UCODE_SIZE (words) plus three bytes
 	   indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
 	if (fw->size != UCODE_SIZE * 4 + 3) {
@@ -1269,7 +1280,10 @@
 		release_firmware(fw);
 		return ERR_PTR(-EINVAL);
 	}
-	/* OK, firmware is validated and ready to use... */
+
+	/* OK, firmware is validated and ready to use. Save a pointer
+	 * to it in the nic */
+	nic->fw = fw;
 	return fw;
 }
 
@@ -1793,9 +1807,7 @@
 			nic->cb_to_clean = nic->cb_to_clean->next;
 			nic->cbs_avail++;
 		}
-		pci_free_consistent(nic->pdev,
-			sizeof(struct cb) * nic->params.cbs.count,
-			nic->cbs, nic->cbs_dma_addr);
+		pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
 		nic->cbs = NULL;
 		nic->cbs_avail = 0;
 	}
@@ -1813,8 +1825,8 @@
 	nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
 	nic->cbs_avail = 0;
 
-	nic->cbs = pci_alloc_consistent(nic->pdev,
-		sizeof(struct cb) * count, &nic->cbs_dma_addr);
+	nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+				  &nic->cbs_dma_addr);
 	if (!nic->cbs)
 		return -ENOMEM;
 
@@ -1852,11 +1864,10 @@
 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 {
-	if (!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
+	if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
 		return -ENOMEM;
 
-	/* Align, init, and map the RFD. */
-	skb_reserve(rx->skb, NET_IP_ALIGN);
+	/* Init, and map the RFD. */
 	skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
 	rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
 		RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
@@ -2841,7 +2852,11 @@
 		DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n");
 		goto err_out_free;
 	}
-
+	nic->cbs_pool = pci_pool_create(netdev->name,
+			   nic->pdev,
+			   nic->params.cbs.count * sizeof(struct cb),
+			   sizeof(u32),
+			   0);
 	DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n",
 		(unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
 		pdev->irq, netdev->dev_addr);
@@ -2871,6 +2886,7 @@
 		unregister_netdev(netdev);
 		e100_free(nic);
 		pci_iounmap(pdev, nic->csr);
+		pci_pool_destroy(nic->cbs_pool);
 		free_netdev(netdev);
 		pci_release_regions(pdev);
 		pci_disable_device(pdev);
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 42e2b7e..2a567df 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -167,6 +167,7 @@
 	unsigned long time_stamp;
 	u16 length;
 	u16 next_to_watch;
+	u16 mapped_as_page;
 };
 
 struct e1000_tx_ring {
@@ -302,7 +303,6 @@
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 490b2b7..13e9ece 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -31,14 +31,22 @@
 #include "e1000.h"
 #include <asm/uaccess.h>
 
+enum {NETDEV_STATS, E1000_STATS};
+
 struct e1000_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \
-		      offsetof(struct e1000_adapter, m)
+#define E1000_STAT(m)		E1000_STATS, \
+				sizeof(((struct e1000_adapter *)0)->m), \
+		      		offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_packets", E1000_STAT(stats.gprc) },
 	{ "tx_packets", E1000_STAT(stats.gptc) },
@@ -50,19 +58,19 @@
 	{ "tx_multicast", E1000_STAT(stats.mptc) },
 	{ "rx_errors", E1000_STAT(stats.rxerrc) },
 	{ "tx_errors", E1000_STAT(stats.txerrc) },
-	{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
 	{ "multicast", E1000_STAT(stats.mprc) },
 	{ "collisions", E1000_STAT(stats.colc) },
 	{ "rx_length_errors", E1000_STAT(stats.rlerrc) },
-	{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
 	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
 	{ "rx_missed_errors", E1000_STAT(stats.mpc) },
 	{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
 	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
 	{ "tx_window_errors", E1000_STAT(stats.latecol) },
 	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
 	{ "tx_deferred_ok", E1000_STAT(stats.dc) },
@@ -861,10 +869,10 @@
 
 	/* NOTE: we don't test MSI interrupts here, yet */
 	/* Hook up test interrupt handler just for this test */
-	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+	if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
 	                 netdev))
 		shared_int = false;
-	else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
+	else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
 	         netdev->name, netdev)) {
 		*data = 1;
 		return -1;
@@ -1830,10 +1838,21 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	e1000_update_stats(adapter);
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+		switch (e1000_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		case E1000_STATS:
+			p = (char *) adapter +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index bcd192c..7e855f9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1839,10 +1839,17 @@
 static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
 					     struct e1000_buffer *buffer_info)
 {
-	buffer_info->dma = 0;
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev, buffer_info->dma,
+				       buffer_info->length, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev,	buffer_info->dma,
+					 buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
+	}
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
@@ -2683,22 +2690,14 @@
 			unsigned int mss)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_buffer *buffer_info;
 	unsigned int len = skb_headlen(skb);
-	unsigned int offset, size, count = 0, i;
+	unsigned int offset = 0, size, count = 0, i;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-	offset = 0;
-
 	while (len) {
 		buffer_info = &tx_ring->buffer_info[i];
 		size = min(len, max_per_txd);
@@ -2735,7 +2734,11 @@
 		buffer_info->length = size;
 		/* set time_stamp *before* dma to help avoid a possible race */
 		buffer_info->time_stamp = jiffies;
-		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
+		buffer_info->mapped_as_page = false;
+		buffer_info->dma = pci_map_single(pdev,	skb->data + offset,
+						  size,	PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma))
+			goto dma_error;
 		buffer_info->next_to_watch = i;
 
 		len -= size;
@@ -2753,7 +2756,7 @@
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = 0;
+		offset = frag->page_offset;
 
 		while (len) {
 			i++;
@@ -2777,7 +2780,12 @@
 
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
-			buffer_info->dma = map[f] + offset;
+			buffer_info->mapped_as_page = true;
+			buffer_info->dma = pci_map_page(pdev, frag->page,
+							offset,	size,
+							PCI_DMA_TODEVICE);
+			if (pci_dma_mapping_error(pdev, buffer_info->dma))
+				goto dma_error;
 			buffer_info->next_to_watch = i;
 
 			len -= size;
@@ -2790,6 +2798,22 @@
 	tx_ring->buffer_info[first].next_to_watch = i;
 
 	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+	buffer_info->dma = 0;
+	count--;
+
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		buffer_info = &tx_ring->buffer_info[i];
+		e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+	}
+
+	return 0;
 }
 
 static void e1000_tx_queue(struct e1000_adapter *adapter,
@@ -3101,10 +3125,8 @@
 
 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -3196,6 +3218,7 @@
 
 void e1000_update_stats(struct e1000_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	unsigned long flags;
@@ -3288,32 +3311,32 @@
 	}
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
 	/* RLEC on some newer hardware can be incorrect so build
 	* our own version based on RUC and ROC */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
 	adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
-	adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_length_errors = adapter->stats.rlerrc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
 	adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
-	adapter->net_stats.tx_errors = adapter->stats.txerrc;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	netdev->stats.tx_errors = adapter->stats.txerrc;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
 	if (hw->bad_tx_carr_stats_fd &&
 	    adapter->link_duplex == FULL_DUPLEX) {
-		adapter->net_stats.tx_carrier_errors = 0;
+		netdev->stats.tx_carrier_errors = 0;
 		adapter->stats.tncrs = 0;
 	}
 
@@ -3484,8 +3507,8 @@
 		adapter->detect_tx_hung = false;
 		if (tx_ring->buffer_info[eop].time_stamp &&
 		    time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
-		               (adapter->tx_timeout_factor * HZ))
-		    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+		               (adapter->tx_timeout_factor * HZ)) &&
+		    !(er32(STATUS) & E1000_STATUS_TXOFF)) {
 
 			/* detected Tx unit hang */
 			DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
@@ -3514,8 +3537,8 @@
 	}
 	adapter->total_tx_bytes += total_tx_bytes;
 	adapter->total_tx_packets += total_tx_packets;
-	adapter->net_stats.tx_bytes += total_tx_bytes;
-	adapter->net_stats.tx_packets += total_tx_packets;
+	netdev->stats.tx_bytes += total_tx_bytes;
+	netdev->stats.tx_packets += total_tx_packets;
 	return (count < tx_ring->count);
 }
 
@@ -3767,8 +3790,8 @@
 
 	adapter->total_rx_packets += total_rx_packets;
 	adapter->total_rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -3867,9 +3890,8 @@
 		 * of reassembly being done in the stack */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -3916,8 +3938,8 @@
 
 	adapter->total_rx_packets += total_rx_packets;
 	adapter->total_rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -3938,9 +3960,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = 256 -
-	                     16 /*for skb_reserve */ -
-	                     NET_IP_ALIGN;
+	unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -3952,7 +3972,7 @@
 			goto check_page;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
@@ -3965,7 +3985,7 @@
 			DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
 					     "at %p\n", bufsz, skb->data);
 			/* Try again, without freeing the previous */
-			skb = netdev_alloc_skb(netdev, bufsz);
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			/* Failed allocation, critical failure */
 			if (!skb) {
 				dev_kfree_skb(oldskb);
@@ -3983,12 +4003,6 @@
 			/* Use new allocation */
 			dev_kfree_skb(oldskb);
 		}
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 check_page:
@@ -4045,7 +4059,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+	unsigned int bufsz = adapter->rx_buffer_len;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -4057,7 +4071,7 @@
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
@@ -4070,7 +4084,7 @@
 			DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
 					     "at %p\n", bufsz, skb->data);
 			/* Try again, without freeing the previous */
-			skb = netdev_alloc_skb(netdev, bufsz);
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			/* Failed allocation, critical failure */
 			if (!skb) {
 				dev_kfree_skb(oldskb);
@@ -4089,12 +4103,6 @@
 			/* Use new allocation */
 			dev_kfree_skb(oldskb);
 		}
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 map_skb:
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index d1e0563..c1a42cf 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -43,10 +43,6 @@
  * 82583V Gigabit Network Connection
  */
 
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define ID_LED_RESERVED_F746 0xF746
@@ -69,15 +65,15 @@
 static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
 static s32 e1000_setup_link_82571(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static void e1000_clear_vfta_82571(struct e1000_hw *hw);
 static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
 static s32 e1000_led_on_82574(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 {
@@ -93,6 +89,9 @@
 	phy->autoneg_mask		 = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 	phy->reset_delay_us		 = 100;
 
+	phy->ops.power_up		 = e1000_power_up_phy_copper;
+	phy->ops.power_down		 = e1000_power_down_phy_copper_82571;
+
 	switch (hw->mac.type) {
 	case e1000_82571:
 	case e1000_82572:
@@ -140,8 +139,6 @@
 /**
  *  e1000_init_nvm_params_82571 - Init NVM func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 {
@@ -205,8 +202,6 @@
 /**
  *  e1000_init_mac_params_82571 - Init MAC func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
 {
@@ -240,7 +235,8 @@
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
+	                ? true : false;
 
 	/* check for link */
 	switch (hw->phy.media_type) {
@@ -313,7 +309,7 @@
 			 * indicates that the bootagent or EFI code has
 			 * improperly left this bit enabled
 			 */
-			hw_dbg(hw, "Please update your 82571 Bootagent\n");
+			e_dbg("Please update your 82571 Bootagent\n");
 		}
 		ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
 	}
@@ -487,7 +483,7 @@
 	}
 
 	if (i == sw_timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		hw->dev_spec.e82571.smb_counter++;
 	}
 	/* Get the FW semaphore. */
@@ -505,7 +501,7 @@
 	if (i == fw_timeout) {
 		/* Release semaphores */
 		e1000_put_hw_semaphore_82571(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -702,8 +698,7 @@
 				      u16 words, u16 *data)
 {
 	struct e1000_nvm_info *nvm = &hw->nvm;
-	u32 i;
-	u32 eewr = 0;
+	u32 i, eewr = 0;
 	s32 ret_val = 0;
 
 	/*
@@ -712,7 +707,7 @@
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -753,7 +748,7 @@
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -763,7 +758,7 @@
 /**
  *  e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D0 state according to the active flag.  When activating LPLU
  *  this function also disables smart speed and vice versa.  LPLU will not be
@@ -834,15 +829,11 @@
  *  e1000_reset_hw_82571 - Reset hardware
  *  @hw: pointer to the HW structure
  *
- *  This resets the hardware into a known state.  This is a
- *  function pointer entry point called by the api module.
+ *  This resets the hardware into a known state.
  **/
 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 {
-	u32 ctrl;
-	u32 extcnf_ctrl;
-	u32 ctrl_ext;
-	u32 icr;
+	u32 ctrl, extcnf_ctrl, ctrl_ext, icr;
 	s32 ret_val;
 	u16 i = 0;
 
@@ -852,9 +843,9 @@
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -893,7 +884,7 @@
 
 	ctrl = er32(CTRL);
 
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 
 	if (hw->nvm.type == e1000_nvm_flash_hw) {
@@ -951,21 +942,19 @@
 	struct e1000_mac_info *mac = &hw->mac;
 	u32 reg_data;
 	s32 ret_val;
-	u16 i;
-	u16 rar_count = mac->rar_entry_count;
+	u16 i, rar_count = mac->rar_entry_count;
 
 	e1000_initialize_hw_bits_82571(hw);
 
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
-	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
-		return ret_val;
-	}
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
-	e1000e_clear_vfta(hw);
+	e_dbg("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
 
 	/* Setup the receive address. */
 	/*
@@ -978,7 +967,7 @@
 	e1000e_init_rx_addrs(hw, rar_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -1125,6 +1114,13 @@
 		reg |= (1 << 22);
 		ew32(GCR, reg);
 
+		/*
+		 * Workaround for hardware errata.
+		 * apply workaround for hardware errata documented in errata
+		 * docs Fixes issue where some error prone or unreliable PCIe
+		 * completions are occurring, particularly with ASPM enabled.
+		 * Without fix, issue can cause tx timeouts.
+		 */
 		reg = er32(GCR2);
 		reg |= 1;
 		ew32(GCR2, reg);
@@ -1137,13 +1133,13 @@
 }
 
 /**
- *  e1000e_clear_vfta - Clear VLAN filter table
+ *  e1000_clear_vfta_82571 - Clear VLAN filter table
  *  @hw: pointer to the HW structure
  *
  *  Clears the register array which contains the VLAN filter table by
  *  setting all the values to 0.
  **/
-void e1000e_clear_vfta(struct e1000_hw *hw)
+static void e1000_clear_vfta_82571(struct e1000_hw *hw)
 {
 	u32 offset;
 	u32 vfta_value = 0;
@@ -1360,8 +1356,20 @@
  *  e1000_check_for_serdes_link_82571 - Check for link (Serdes)
  *  @hw: pointer to the HW structure
  *
- *  Checks for link up on the hardware.  If link is not up and we have
- *  a signal, then we need to force link up.
+ *  Reports the link state as up or down.
+ *
+ *  If autonegotiation is supported by the link partner, the link state is
+ *  determined by the result of autonegotiation. This is the most likely case.
+ *  If autonegotiation is not supported by the link partner, and the link
+ *  has a valid signal, force the link up.
+ *
+ *  The link state is represented internally here by 4 states:
+ *
+ *  1) down
+ *  2) autoneg_progress
+ *  3) autoneg_complete (the link sucessfully autonegotiated)
+ *  4) forced_up (the link has been forced up, it did not autonegotiate)
+ *
  **/
 static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 {
@@ -1387,7 +1395,8 @@
 				 */
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "AN_UP     -> AN_PROG\n");
+				mac->serdes_has_link = false;
+				e_dbg("AN_UP     -> AN_PROG\n");
 			}
 		break;
 
@@ -1401,79 +1410,86 @@
 			if (rxcw & E1000_RXCW_C) {
 				/* Enable autoneg, and unforce link up */
 				ew32(TXCW, mac->txcw);
-				ew32(CTRL,
-				    (ctrl & ~E1000_CTRL_SLU));
+				ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 				mac->serdes_link_state =
 				    e1000_serdes_link_autoneg_progress;
-				hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+				mac->serdes_has_link = false;
+				e_dbg("FORCED_UP -> AN_PROG\n");
 			}
 			break;
 
 		case e1000_serdes_link_autoneg_progress:
-			/*
-			 * If the LU bit is set in the STATUS register,
-			 * autoneg has completed sucessfully. If not,
-			 * try foring the link because the far end may be
-			 * available but not capable of autonegotiation.
-			 */
-			if (status & E1000_STATUS_LU)  {
-				mac->serdes_link_state =
-				    e1000_serdes_link_autoneg_complete;
-				hw_dbg(hw, "AN_PROG   -> AN_UP\n");
+			if (rxcw & E1000_RXCW_C) {
+				/*
+				 * We received /C/ ordered sets, meaning the
+				 * link partner has autonegotiated, and we can
+				 * trust the Link Up (LU) status bit.
+				 */
+				if (status & E1000_STATUS_LU) {
+					mac->serdes_link_state =
+					    e1000_serdes_link_autoneg_complete;
+					e_dbg("AN_PROG   -> AN_UP\n");
+					mac->serdes_has_link = true;
+				} else {
+					/* Autoneg completed, but failed. */
+					mac->serdes_link_state =
+					    e1000_serdes_link_down;
+					e_dbg("AN_PROG   -> DOWN\n");
+				}
 			} else {
 				/*
-				 * Disable autoneg, force link up and
-				 * full duplex, and change state to forced
+				 * The link partner did not autoneg.
+				 * Force link up and full duplex, and change
+				 * state to forced.
 				 */
-				ew32(TXCW,
-				    (mac->txcw & ~E1000_TXCW_ANE));
+				ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
 				ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
 				ew32(CTRL, ctrl);
 
 				/* Configure Flow Control after link up. */
-				ret_val =
-				    e1000e_config_fc_after_link_up(hw);
+				ret_val = e1000e_config_fc_after_link_up(hw);
 				if (ret_val) {
-					hw_dbg(hw, "Error config flow control\n");
+					e_dbg("Error config flow control\n");
 					break;
 				}
 				mac->serdes_link_state =
 				    e1000_serdes_link_forced_up;
-				hw_dbg(hw, "AN_PROG   -> FORCED_UP\n");
+				mac->serdes_has_link = true;
+				e_dbg("AN_PROG   -> FORCED_UP\n");
 			}
-			mac->serdes_has_link = true;
 			break;
 
 		case e1000_serdes_link_down:
 		default:
-			/* The link was down but the receiver has now gained
+			/*
+			 * The link was down but the receiver has now gained
 			 * valid sync, so lets see if we can bring the link
-			 * up. */
+			 * up.
+			 */
 			ew32(TXCW, mac->txcw);
-			ew32(CTRL,
-			    (ctrl & ~E1000_CTRL_SLU));
+			ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 			mac->serdes_link_state =
 			    e1000_serdes_link_autoneg_progress;
-			hw_dbg(hw, "DOWN      -> AN_PROG\n");
+			e_dbg("DOWN      -> AN_PROG\n");
 			break;
 		}
 	} else {
 		if (!(rxcw & E1000_RXCW_SYNCH)) {
 			mac->serdes_has_link = false;
 			mac->serdes_link_state = e1000_serdes_link_down;
-			hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+			e_dbg("ANYSTATE  -> DOWN\n");
 		} else {
 			/*
-			 * We have sync, and can tolerate one
-			 * invalid (IV) codeword before declaring
-			 * link down, so reread to look again
+			 * We have sync, and can tolerate one invalid (IV)
+			 * codeword before declaring link down, so reread
+			 * to look again.
 			 */
 			udelay(10);
 			rxcw = er32(RXCW);
 			if (rxcw & E1000_RXCW_IV) {
 				mac->serdes_link_state = e1000_serdes_link_down;
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "ANYSTATE  -> DOWN\n");
+				e_dbg("ANYSTATE  -> DOWN\n");
 			}
 		}
 	}
@@ -1495,7 +1511,7 @@
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -1525,7 +1541,7 @@
 bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
 {
 	if (hw->mac.type != e1000_82571)
-		return 0;
+		return false;
 
 	return hw->dev_spec.e82571.laa_is_present;
 }
@@ -1535,7 +1551,7 @@
  *  @hw: pointer to the HW structure
  *  @state: enable/disable locally administered address
  *
- *  Enable/Disable the current locally administers address state.
+ *  Enable/Disable the current locally administered address state.
  **/
 void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
 {
@@ -1609,6 +1625,28 @@
 }
 
 /**
+ * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	struct e1000_mac_info *mac = &hw->mac;
+
+	if (!(phy->ops.check_reset_block))
+		return;
+
+	/* If the management interface is not enabled, then power down */
+	if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
  *  e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
  *  @hw: pointer to the HW structure
  *
@@ -1616,44 +1654,42 @@
  **/
 static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(PRC64);
-	temp = er32(PRC127);
-	temp = er32(PRC255);
-	temp = er32(PRC511);
-	temp = er32(PRC1023);
-	temp = er32(PRC1522);
-	temp = er32(PTC64);
-	temp = er32(PTC127);
-	temp = er32(PTC255);
-	temp = er32(PTC511);
-	temp = er32(PTC1023);
-	temp = er32(PTC1522);
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
 
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
 
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
 
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
+	er32(IAC);
+	er32(ICRXOC);
 
-	temp = er32(ICRXPTC);
-	temp = er32(ICRXATC);
-	temp = er32(ICTXPTC);
-	temp = er32(ICTXATC);
-	temp = er32(ICTXQEC);
-	temp = er32(ICTXQMTC);
-	temp = er32(ICRXDMTC);
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
 }
 
 static struct e1000_mac_operations e82571_mac_ops = {
@@ -1667,6 +1703,8 @@
 	/* .led_on: mac type dependent */
 	.led_off		= e1000e_led_off_generic,
 	.update_mc_addr_list	= e1000_update_mc_addr_list_82571,
+	.write_vfta		= e1000_write_vfta_generic,
+	.clear_vfta		= e1000_clear_vfta_82571,
 	.reset_hw		= e1000_reset_hw_82571,
 	.init_hw		= e1000_init_hw_82571,
 	.setup_link		= e1000_setup_link_82571,
@@ -1675,64 +1713,67 @@
 };
 
 static struct e1000_phy_operations e82_phy_ops_igp = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_igp,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= NULL,
+	.commit			= NULL,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_igp,
 	.get_cfg_done		= e1000_get_cfg_done_82571,
 	.get_cable_length	= e1000e_get_cable_length_igp_2,
-	.get_phy_info		= e1000e_get_phy_info_igp,
-	.read_phy_reg		= e1000e_read_phy_reg_igp,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_igp,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.write_reg		= e1000e_write_phy_reg_igp,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_m88 = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= e1000e_phy_sw_reset,
+	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
 	.get_cfg_done		= e1000e_get_cfg_done,
 	.get_cable_length	= e1000e_get_cable_length_m88,
-	.get_phy_info		= e1000e_get_phy_info_m88,
-	.read_phy_reg		= e1000e_read_phy_reg_m88,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_m88,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_m88,
+	.write_reg		= e1000e_write_phy_reg_m88,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_phy_operations e82_phy_ops_bm = {
-	.acquire_phy		= e1000_get_hw_semaphore_82571,
+	.acquire		= e1000_get_hw_semaphore_82571,
+	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy		= e1000e_phy_sw_reset,
+	.commit			= e1000e_phy_sw_reset,
 	.force_speed_duplex	= e1000e_phy_force_speed_duplex_m88,
 	.get_cfg_done		= e1000e_get_cfg_done,
 	.get_cable_length	= e1000e_get_cable_length_m88,
-	.get_phy_info		= e1000e_get_phy_info_m88,
-	.read_phy_reg		= e1000e_read_phy_reg_bm2,
-	.release_phy		= e1000_put_hw_semaphore_82571,
-	.reset_phy		= e1000e_phy_hw_reset_generic,
+	.get_info		= e1000e_get_phy_info_m88,
+	.read_reg		= e1000e_read_phy_reg_bm2,
+	.release		= e1000_put_hw_semaphore_82571,
+	.reset			= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_82571,
 	.set_d3_lplu_state	= e1000e_set_d3_lplu_state,
-	.write_phy_reg		= e1000e_write_phy_reg_bm2,
+	.write_reg		= e1000e_write_phy_reg_bm2,
 	.cfg_on_link_up      	= NULL,
 };
 
 static struct e1000_nvm_operations e82571_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_82571,
-	.read_nvm		= e1000e_read_nvm_eerd,
-	.release_nvm		= e1000_release_nvm_82571,
-	.update_nvm		= e1000_update_nvm_checksum_82571,
+	.acquire		= e1000_acquire_nvm_82571,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_82571,
+	.update			= e1000_update_nvm_checksum_82571,
 	.valid_led_default	= e1000_valid_led_default_82571,
-	.validate_nvm		= e1000_validate_nvm_checksum_82571,
-	.write_nvm		= e1000_write_nvm_82571,
+	.validate		= e1000_validate_nvm_checksum_82571,
+	.write			= e1000_write_nvm_82571,
 };
 
 struct e1000_info e1000_82571_info = {
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index 1190167..86d2809 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 189dfa2..cebbd90 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -36,6 +36,7 @@
 #include <linux/workqueue.h>
 #include <linux/io.h>
 #include <linux/netdevice.h>
+#include <linux/pci.h>
 
 #include "hw.h"
 
@@ -47,9 +48,9 @@
 
 #ifdef DEBUG
 #define e_dbg(format, arg...) \
-	e_printk(KERN_DEBUG , adapter, format, ## arg)
+	e_printk(KERN_DEBUG , hw->adapter, format, ## arg)
 #else
-#define e_dbg(format, arg...) do { (void)(adapter); } while (0)
+#define e_dbg(format, arg...) do { (void)(hw); } while (0)
 #endif
 
 #define e_err(format, arg...) \
@@ -141,6 +142,8 @@
 #define HV_TNCRS_UPPER		PHY_REG(778, 29) /* Transmit with no CRS */
 #define HV_TNCRS_LOWER		PHY_REG(778, 30)
 
+#define E1000_FCRTV_PCH     0x05F40 /* PCH Flow Control Refresh Timer Value */
+
 /* BM PHY Copper Specific Status */
 #define BM_CS_STATUS                      17
 #define BM_CS_STATUS_LINK_UP              0x0400
@@ -191,12 +194,15 @@
 			unsigned long time_stamp;
 			u16 length;
 			u16 next_to_watch;
+			u16 mapped_as_page;
 		};
 		/* Rx */
-		/* arrays of page information for packet split */
-		struct e1000_ps_page *ps_pages;
+		struct {
+			/* arrays of page information for packet split */
+			struct e1000_ps_page *ps_pages;
+			struct page *page;
+		};
 	};
-	struct page *page;
 };
 
 struct e1000_ring {
@@ -329,7 +335,6 @@
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
@@ -364,6 +369,7 @@
 	struct work_struct downshift_task;
 	struct work_struct update_phy_task;
 	struct work_struct led_blink_task;
+	struct work_struct print_hang_task;
 };
 
 struct e1000_info {
@@ -486,6 +492,7 @@
 extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
 extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw);
+extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
 extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
@@ -505,7 +512,7 @@
 extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
 extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
 extern s32 e1000e_setup_link(struct e1000_hw *hw);
-extern void e1000e_clear_vfta(struct e1000_hw *hw);
+extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
 extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
 extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
 					       u8 *mc_addr_list,
@@ -521,7 +528,7 @@
 extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
 extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
 extern s32 e1000e_blink_led(struct e1000_hw *hw);
-extern void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
 extern void e1000e_reset_adaptive(struct e1000_hw *hw);
 extern void e1000e_update_adaptive(struct e1000_hw *hw);
 
@@ -564,6 +571,8 @@
 extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 			       u32 usec_interval, bool *success);
 extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
+extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
 extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
 extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
 extern s32 e1000e_check_downshift(struct e1000_hw *hw);
@@ -581,9 +590,15 @@
 extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
 extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
 
+extern s32 e1000_check_polarity_m88(struct e1000_hw *hw);
+extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
+extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
+
 static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
-	return hw->phy.ops.reset_phy(hw);
+	return hw->phy.ops.reset(hw);
 }
 
 static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
@@ -593,12 +608,12 @@
 
 static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
 {
-	return hw->phy.ops.read_phy_reg(hw, offset, data);
+	return hw->phy.ops.read_reg(hw, offset, data);
 }
 
 static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
 {
-	return hw->phy.ops.write_phy_reg(hw, offset, data);
+	return hw->phy.ops.write_reg(hw, offset, data);
 }
 
 static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
@@ -618,27 +633,27 @@
 
 static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
 {
-	return hw->nvm.ops.validate_nvm(hw);
+	return hw->nvm.ops.validate(hw);
 }
 
 static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
 {
-	return hw->nvm.ops.update_nvm(hw);
+	return hw->nvm.ops.update(hw);
 }
 
 static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-	return hw->nvm.ops.read_nvm(hw, offset, words, data);
+	return hw->nvm.ops.read(hw, offset, words, data);
 }
 
 static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 {
-	return hw->nvm.ops.write_nvm(hw, offset, words, data);
+	return hw->nvm.ops.write(hw, offset, words, data);
 }
 
 static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
 {
-	return hw->phy.ops.get_phy_info(hw);
+	return hw->phy.ops.get_info(hw);
 }
 
 static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index ae5d736..d2a1047 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -31,11 +31,6 @@
  * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
  */
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL	 0x00
@@ -104,6 +99,8 @@
  */
 static const u16 e1000_gg82563_cable_length_table[] =
 	 { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+#define GG82563_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_gg82563_cable_length_table)
 
 static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
 static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
@@ -117,12 +114,11 @@
                                             u16 *data);
 static s32  e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
                                              u16 data);
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
 {
@@ -132,6 +128,9 @@
 	if (hw->phy.media_type != e1000_media_type_copper) {
 		phy->type	= e1000_phy_none;
 		return 0;
+	} else {
+		phy->ops.power_up = e1000_power_up_phy_copper;
+		phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
 	}
 
 	phy->addr		= 1;
@@ -152,8 +151,6 @@
 /**
  *  e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
 {
@@ -200,8 +197,6 @@
 /**
  *  e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
  *  @hw: pointer to the HW structure
- *
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
 {
@@ -224,7 +219,8 @@
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0;
+	mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK)
+                        ? true : false;
 
 	/* check for link */
 	switch (hw->phy.media_type) {
@@ -272,8 +268,7 @@
  *  e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
  *  @hw: pointer to the HW structure
  *
- *  A wrapper to acquire access rights to the correct PHY.  This is a
- *  function pointer entry point called by the api module.
+ *  A wrapper to acquire access rights to the correct PHY.
  **/
 static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
 {
@@ -287,8 +282,7 @@
  *  e1000_release_phy_80003es2lan - Release rights to access PHY
  *  @hw: pointer to the HW structure
  *
- *  A wrapper to release access rights to the correct PHY.  This is a
- *  function pointer entry point called by the api module.
+ *  A wrapper to release access rights to the correct PHY.
  **/
 static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
 {
@@ -333,8 +327,7 @@
  *  e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
  *  @hw: pointer to the HW structure
  *
- *  Acquire the semaphore to access the EEPROM.  This is a function
- *  pointer entry point called by the api module.
+ *  Acquire the semaphore to access the EEPROM.
  **/
 static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
 {
@@ -356,8 +349,7 @@
  *  e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
  *  @hw: pointer to the HW structure
  *
- *  Release the semaphore used to access the EEPROM.  This is a
- *  function pointer entry point called by the api module.
+ *  Release the semaphore used to access the EEPROM.
  **/
 static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
 {
@@ -399,8 +391,7 @@
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw,
-		       "Driver can't access resource, SW_FW_SYNC timeout.\n");
+		e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
 		return -E1000_ERR_SWFW_SYNC;
 	}
 
@@ -440,8 +431,7 @@
  *  @offset: offset of the register to read
  *  @data: pointer to the data returned from the operation
  *
- *  Read the GG82563 PHY register.  This is a function pointer entry
- *  point called by the api module.
+ *  Read the GG82563 PHY register.
  **/
 static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 						  u32 offset, u16 *data)
@@ -505,8 +495,7 @@
  *  @offset: offset of the register to read
  *  @data: value to write to the register
  *
- *  Write to the GG82563 PHY register.  This is a function pointer entry
- *  point called by the api module.
+ *  Write to the GG82563 PHY register.
  **/
 static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 						   u32 offset, u16 data)
@@ -571,8 +560,7 @@
  *  @words: number of words to write
  *  @data: buffer of data to write to the NVM
  *
- *  Write "words" of data to the ESB2 NVM.  This is a function
- *  pointer entry point called by the api module.
+ *  Write "words" of data to the ESB2 NVM.
  **/
 static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
 				       u16 words, u16 *data)
@@ -602,7 +590,7 @@
 		timeout--;
 	}
 	if (!timeout) {
-		hw_dbg(hw, "MNG configuration cycle has not completed.\n");
+		e_dbg("MNG configuration cycle has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -635,7 +623,7 @@
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data);
+	e_dbg("GG82563 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -653,7 +641,7 @@
 	udelay(1);
 
 	if (hw->phy.autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link "
+		e_dbg("Waiting for forced speed/duplex link "
 			 "on GG82563 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
@@ -712,21 +700,27 @@
 static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 phy_data;
-	u16 index;
+	s32 ret_val = 0;
+	u16 phy_data, index;
 
 	ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
 	if (ret_val)
-		return ret_val;
+		goto out;
 
 	index = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+	if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_gg82563_cable_length_table[index];
-	phy->max_cable_length = e1000_gg82563_cable_length_table[index+5];
+	phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
-	return 0;
+out:
+	return ret_val;
 }
 
 /**
@@ -736,7 +730,6 @@
  *  @duplex: pointer to duplex buffer
  *
  *  Retrieve the current speed and duplex configuration.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
 					      u16 *duplex)
@@ -762,12 +755,10 @@
  *  @hw: pointer to the HW structure
  *
  *  Perform a global reset to the ESB2 controller.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
 {
-	u32 ctrl;
-	u32 icr;
+	u32 ctrl, icr;
 	s32 ret_val;
 
 	/*
@@ -776,9 +767,9 @@
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	ew32(RCTL, 0);
@@ -790,7 +781,7 @@
 	ctrl = er32(CTRL);
 
 	ret_val = e1000_acquire_phy_80003es2lan(hw);
-	hw_dbg(hw, "Issuing a global reset to MAC\n");
+	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 	e1000_release_phy_80003es2lan(hw);
 
@@ -811,7 +802,6 @@
  *  @hw: pointer to the HW structure
  *
  *  Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
- *  This is a function pointer entry point called by the api module.
  **/
 static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
 {
@@ -824,20 +814,19 @@
 
 	/* Initialize identification LED */
 	ret_val = e1000e_id_led_init(hw);
-	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
-		return ret_val;
-	}
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Disabling VLAN filtering */
-	hw_dbg(hw, "Initializing the IEEE VLAN\n");
-	e1000e_clear_vfta(hw);
+	e_dbg("Initializing the IEEE VLAN\n");
+	mac->ops.clear_vfta(hw);
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -994,7 +983,7 @@
 	/* SW Reset the PHY so all changes take effect */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Resetting the PHY\n");
+		e_dbg("Error Resetting the PHY\n");
 		return ret_val;
 	}
 
@@ -1318,6 +1307,23 @@
 }
 
 /**
+ * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
  *  e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters
  *  @hw: pointer to the HW structure
  *
@@ -1325,44 +1331,42 @@
  **/
 static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(PRC64);
-	temp = er32(PRC127);
-	temp = er32(PRC255);
-	temp = er32(PRC511);
-	temp = er32(PRC1023);
-	temp = er32(PRC1522);
-	temp = er32(PTC64);
-	temp = er32(PTC127);
-	temp = er32(PTC255);
-	temp = er32(PTC511);
-	temp = er32(PTC1023);
-	temp = er32(PTC1522);
+	er32(PRC64);
+	er32(PRC127);
+	er32(PRC255);
+	er32(PRC511);
+	er32(PRC1023);
+	er32(PRC1522);
+	er32(PTC64);
+	er32(PTC127);
+	er32(PTC255);
+	er32(PTC511);
+	er32(PTC1023);
+	er32(PTC1522);
 
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
 
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
 
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
+	er32(IAC);
+	er32(ICRXOC);
 
-	temp = er32(ICRXPTC);
-	temp = er32(ICRXATC);
-	temp = er32(ICTXPTC);
-	temp = er32(ICTXATC);
-	temp = er32(ICTXQEC);
-	temp = er32(ICTXQMTC);
-	temp = er32(ICRXDMTC);
+	er32(ICRXPTC);
+	er32(ICRXATC);
+	er32(ICTXPTC);
+	er32(ICTXATC);
+	er32(ICTXQEC);
+	er32(ICTXQMTC);
+	er32(ICRXDMTC);
 }
 
 static struct e1000_mac_operations es2_mac_ops = {
@@ -1376,6 +1380,8 @@
 	.led_on			= e1000e_led_on_generic,
 	.led_off		= e1000e_led_off_generic,
 	.update_mc_addr_list	= e1000e_update_mc_addr_list_generic,
+	.write_vfta		= e1000_write_vfta_generic,
+	.clear_vfta		= e1000_clear_vfta_generic,
 	.reset_hw		= e1000_reset_hw_80003es2lan,
 	.init_hw		= e1000_init_hw_80003es2lan,
 	.setup_link		= e1000e_setup_link,
@@ -1384,30 +1390,31 @@
 };
 
 static struct e1000_phy_operations es2_phy_ops = {
-	.acquire_phy		= e1000_acquire_phy_80003es2lan,
+	.acquire		= e1000_acquire_phy_80003es2lan,
+	.check_polarity		= e1000_check_polarity_m88,
 	.check_reset_block	= e1000e_check_reset_block_generic,
-	.commit_phy	 	= e1000e_phy_sw_reset,
+	.commit		 	= e1000e_phy_sw_reset,
 	.force_speed_duplex 	= e1000_phy_force_speed_duplex_80003es2lan,
 	.get_cfg_done       	= e1000_get_cfg_done_80003es2lan,
 	.get_cable_length   	= e1000_get_cable_length_80003es2lan,
-	.get_phy_info       	= e1000e_get_phy_info_m88,
-	.read_phy_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
-	.release_phy		= e1000_release_phy_80003es2lan,
-	.reset_phy	  	= e1000e_phy_hw_reset_generic,
+	.get_info       	= e1000e_get_phy_info_m88,
+	.read_reg       	= e1000_read_phy_reg_gg82563_80003es2lan,
+	.release		= e1000_release_phy_80003es2lan,
+	.reset		  	= e1000e_phy_hw_reset_generic,
 	.set_d0_lplu_state  	= NULL,
 	.set_d3_lplu_state  	= e1000e_set_d3_lplu_state,
-	.write_phy_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
+	.write_reg      	= e1000_write_phy_reg_gg82563_80003es2lan,
 	.cfg_on_link_up      	= e1000_cfg_on_link_up_80003es2lan,
 };
 
 static struct e1000_nvm_operations es2_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_80003es2lan,
-	.read_nvm		= e1000e_read_nvm_eerd,
-	.release_nvm		= e1000_release_nvm_80003es2lan,
-	.update_nvm		= e1000e_update_nvm_checksum_generic,
+	.acquire		= e1000_acquire_nvm_80003es2lan,
+	.read			= e1000e_read_nvm_eerd,
+	.release		= e1000_release_nvm_80003es2lan,
+	.update			= e1000e_update_nvm_checksum_generic,
 	.valid_led_default	= e1000e_valid_led_default,
-	.validate_nvm		= e1000e_validate_nvm_checksum_generic,
-	.write_nvm		= e1000_write_nvm_80003es2lan,
+	.validate		= e1000e_validate_nvm_checksum_generic,
+	.write			= e1000_write_nvm_80003es2lan,
 };
 
 struct e1000_info e1000_es2_info = {
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 1bf4d2a..0aa50c2 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -35,14 +35,22 @@
 
 #include "e1000.h"
 
+enum {NETDEV_STATS, E1000_STATS};
+
 struct e1000_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
-		      offsetof(struct e1000_adapter, m)
+#define E1000_STAT(m)		E1000_STATS, \
+				sizeof(((struct e1000_adapter *)0)->m), \
+		      		offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_packets", E1000_STAT(stats.gprc) },
 	{ "tx_packets", E1000_STAT(stats.gptc) },
@@ -52,21 +60,21 @@
 	{ "tx_broadcast", E1000_STAT(stats.bptc) },
 	{ "rx_multicast", E1000_STAT(stats.mprc) },
 	{ "tx_multicast", E1000_STAT(stats.mptc) },
-	{ "rx_errors", E1000_STAT(net_stats.rx_errors) },
-	{ "tx_errors", E1000_STAT(net_stats.tx_errors) },
-	{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+	{ "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) },
+	{ "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) },
+	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
 	{ "multicast", E1000_STAT(stats.mprc) },
 	{ "collisions", E1000_STAT(stats.colc) },
-	{ "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
-	{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+	{ "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) },
+	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
 	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
 	{ "rx_missed_errors", E1000_STAT(stats.mpc) },
 	{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
 	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
 	{ "tx_window_errors", E1000_STAT(stats.latecol) },
 	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
 	{ "tx_deferred_ok", E1000_STAT(stats.dc) },
@@ -182,6 +190,17 @@
 static u32 e1000_get_link(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_mac_info *mac = &adapter->hw.mac;
+
+	/*
+	 * If the link is not reported up to netdev, interrupts are disabled,
+	 * and so the physical link state may have changed since we last
+	 * looked. Set get_link_status to make sure that the true link
+	 * state is interrogated, rather than pulling a cached and possibly
+	 * stale link state from the driver.
+	 */
+	if (!netif_carrier_ok(netdev))
+		mac->get_link_status = 1;
 
 	return e1000_has_link(adapter);
 }
@@ -327,10 +346,18 @@
 
 		hw->fc.current_mode = hw->fc.requested_mode;
 
-		retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
-			  hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
+		if (hw->phy.media_type == e1000_media_type_fiber) {
+			retval = hw->mac.ops.setup_link(hw);
+			/* implicit goto out */
+		} else {
+			retval = e1000e_force_mac_fc(hw);
+			if (retval)
+				goto out;
+			e1000e_set_fc_watermarks(hw);
+		}
 	}
 
+out:
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
@@ -508,7 +535,8 @@
 
 	if (ret_val) {
 		/* a read error occurred, throw away the result */
-		memset(eeprom_buff, 0xff, sizeof(eeprom_buff));
+		memset(eeprom_buff, 0xff, sizeof(u16) *
+		       (last_word - first_word + 1));
 	} else {
 		/* Device's eeprom is always little-endian, word addressable */
 		for (i = 0; i < last_word - first_word + 1; i++)
@@ -588,7 +616,9 @@
 	 * and flush shadow RAM for applicable controllers
 	 */
 	if ((first_word <= NVM_CHECKSUM_REG) ||
-	    (hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82573))
+	    (hw->mac.type == e1000_82583) ||
+	    (hw->mac.type == e1000_82574) ||
+	    (hw->mac.type == e1000_82573))
 		ret_val = e1000e_update_nvm_checksum(hw);
 
 out:
@@ -921,10 +951,10 @@
 		e1000e_set_interrupt_capability(adapter);
 	}
 	/* Hook up test interrupt handler just for this test */
-	if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+	if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
 			 netdev)) {
 		shared_int = 0;
-	} else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
+	} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
 		 netdev->name, netdev)) {
 		*data = 1;
 		ret_val = -1;
@@ -1231,6 +1261,10 @@
 
 	hw->mac.autoneg = 0;
 
+	/* Workaround: K1 must be disabled for stable 1Gbps operation */
+	if (hw->mac.type == e1000_pchlan)
+		e1000_configure_k1_ich8lan(hw, false);
+
 	if (hw->phy.type == e1000_phy_m88) {
 		/* Auto-MDI/MDIX Off */
 		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
@@ -1761,12 +1795,11 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	if (wol->wolopts & WAKE_MAGICSECURE)
-		return -EOPNOTSUPP;
-
 	if (!(adapter->flags & FLAG_HAS_WOL) ||
-	    !device_can_wakeup(&adapter->pdev->dev))
-		return wol->wolopts ? -EOPNOTSUPP : 0;
+	    !device_can_wakeup(&adapter->pdev->dev) ||
+	    (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+	                      WAKE_MAGIC | WAKE_PHY | WAKE_ARP)))
+		return -EOPNOTSUPP;
 
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
@@ -1824,6 +1857,7 @@
 
 	if ((hw->phy.type == e1000_phy_ife) ||
 	    (hw->mac.type == e1000_pchlan) ||
+	    (hw->mac.type == e1000_82583) ||
 	    (hw->mac.type == e1000_82574)) {
 		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 		if (!adapter->blink_timer.function) {
@@ -1904,10 +1938,21 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	e1000e_update_stats(adapter);
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+		switch (e1000_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		case E1000_STATS:
+			p = (char *) adapter +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
@@ -1967,6 +2012,8 @@
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
+	.get_flags		= ethtool_op_get_flags,
+	.set_flags		= ethtool_op_set_flags,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index aaea41e..a7d08da 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -219,7 +219,7 @@
 	E1000_HICR      = 0x08F00, /* Host Interface Control */
 };
 
-/* RSS registers */
+#define E1000_MAX_PHY_ADDR		4
 
 /* IGP01E1000 Specific Registers */
 #define IGP01E1000_PHY_PORT_CONFIG	0x10 /* Port Config */
@@ -356,6 +356,7 @@
 #define E1000_DEV_ID_80003ES2LAN_COPPER_SPT	0x10BA
 #define E1000_DEV_ID_80003ES2LAN_SERDES_SPT	0x10BB
 
+#define E1000_DEV_ID_ICH8_82567V_3		0x1501
 #define E1000_DEV_ID_ICH8_IGP_M_AMT		0x1049
 #define E1000_DEV_ID_ICH8_IGP_AMT		0x104A
 #define E1000_DEV_ID_ICH8_IGP_C			0x104B
@@ -741,6 +742,7 @@
 	s32  (*check_for_link)(struct e1000_hw *);
 	s32  (*cleanup_led)(struct e1000_hw *);
 	void (*clear_hw_cntrs)(struct e1000_hw *);
+	void (*clear_vfta)(struct e1000_hw *);
 	s32  (*get_bus_info)(struct e1000_hw *);
 	s32  (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
 	s32  (*led_on)(struct e1000_hw *);
@@ -751,38 +753,41 @@
 	s32  (*setup_link)(struct e1000_hw *);
 	s32  (*setup_physical_interface)(struct e1000_hw *);
 	s32  (*setup_led)(struct e1000_hw *);
+	void (*write_vfta)(struct e1000_hw *, u32, u32);
 };
 
 /* Function pointers for the PHY. */
 struct e1000_phy_operations {
-	s32  (*acquire_phy)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*cfg_on_link_up)(struct e1000_hw *);
 	s32  (*check_polarity)(struct e1000_hw *);
 	s32  (*check_reset_block)(struct e1000_hw *);
-	s32  (*commit_phy)(struct e1000_hw *);
+	s32  (*commit)(struct e1000_hw *);
 	s32  (*force_speed_duplex)(struct e1000_hw *);
 	s32  (*get_cfg_done)(struct e1000_hw *hw);
 	s32  (*get_cable_length)(struct e1000_hw *);
-	s32  (*get_phy_info)(struct e1000_hw *);
-	s32  (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
-	s32  (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *);
-	void (*release_phy)(struct e1000_hw *);
-	s32  (*reset_phy)(struct e1000_hw *);
+	s32  (*get_info)(struct e1000_hw *);
+	s32  (*read_reg)(struct e1000_hw *, u32, u16 *);
+	s32  (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*reset)(struct e1000_hw *);
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
-	s32  (*write_phy_reg)(struct e1000_hw *, u32, u16);
-	s32  (*write_phy_reg_locked)(struct e1000_hw *, u32, u16);
-	s32  (*cfg_on_link_up)(struct e1000_hw *);
+	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+	s32  (*write_reg_locked)(struct e1000_hw *, u32, u16);
+	void (*power_up)(struct e1000_hw *);
+	void (*power_down)(struct e1000_hw *);
 };
 
 /* Function pointers for the NVM. */
 struct e1000_nvm_operations {
-	s32  (*acquire_nvm)(struct e1000_hw *);
-	s32  (*read_nvm)(struct e1000_hw *, u16, u16, u16 *);
-	void (*release_nvm)(struct e1000_hw *);
-	s32  (*update_nvm)(struct e1000_hw *);
+	s32  (*acquire)(struct e1000_hw *);
+	s32  (*read)(struct e1000_hw *, u16, u16, u16 *);
+	void (*release)(struct e1000_hw *);
+	s32  (*update)(struct e1000_hw *);
 	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
-	s32  (*validate_nvm)(struct e1000_hw *);
-	s32  (*write_nvm)(struct e1000_hw *, u16, u16, u16 *);
+	s32  (*validate)(struct e1000_hw *);
+	s32  (*write)(struct e1000_hw *, u16, u16, u16 *);
 };
 
 struct e1000_mac_info {
@@ -925,15 +930,4 @@
 	} dev_spec;
 };
 
-#ifdef DEBUG
-#define hw_dbg(hw, format, arg...) \
-	printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg)
-#else
-static inline int __attribute__ ((format (printf, 2, 3)))
-hw_dbg(struct e1000_hw *hw, const char *format, ...)
-{
-	return 0;
-}
-#endif
-
 #endif
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index 51ddb04..7b33be9 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -54,11 +54,6 @@
  * 82578DC Gigabit Network Connection
  */
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 #define ICH_FLASH_GFPREG		0x0000
@@ -200,7 +195,6 @@
 static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
 static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
-static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw);
 static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
 static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
 						u32 offset, u8 byte);
@@ -222,9 +216,9 @@
 static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
 static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
 static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
 static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
 static s32  e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
-static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
 
 static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
 {
@@ -265,26 +259,37 @@
 	phy->addr                     = 1;
 	phy->reset_delay_us           = 100;
 
-	phy->ops.check_polarity       = e1000_check_polarity_ife_ich8lan;
-	phy->ops.read_phy_reg         = e1000_read_phy_reg_hv;
-	phy->ops.read_phy_reg_locked  = e1000_read_phy_reg_hv_locked;
+	phy->ops.read_reg             = e1000_read_phy_reg_hv;
+	phy->ops.read_reg_locked      = e1000_read_phy_reg_hv_locked;
 	phy->ops.set_d0_lplu_state    = e1000_set_lplu_state_pchlan;
 	phy->ops.set_d3_lplu_state    = e1000_set_lplu_state_pchlan;
-	phy->ops.write_phy_reg        = e1000_write_phy_reg_hv;
-	phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked;
+	phy->ops.write_reg            = e1000_write_phy_reg_hv;
+	phy->ops.write_reg_locked     = e1000_write_phy_reg_hv_locked;
+	phy->ops.power_up             = e1000_power_up_phy_copper;
+	phy->ops.power_down           = e1000_power_down_phy_copper_ich8lan;
 	phy->autoneg_mask             = AUTONEG_ADVERTISE_SPEED_DEFAULT;
 
 	phy->id = e1000_phy_unknown;
 	e1000e_get_phy_id(hw);
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
 
-	if (phy->type == e1000_phy_82577) {
+	switch (phy->type) {
+	case e1000_phy_82577:
 		phy->ops.check_polarity = e1000_check_polarity_82577;
 		phy->ops.force_speed_duplex =
 			e1000_phy_force_speed_duplex_82577;
-		phy->ops.get_cable_length   = e1000_get_cable_length_82577;
-		phy->ops.get_phy_info = e1000_get_phy_info_82577;
-		phy->ops.commit_phy = e1000e_phy_sw_reset;
+		phy->ops.get_cable_length = e1000_get_cable_length_82577;
+		phy->ops.get_info = e1000_get_phy_info_82577;
+		phy->ops.commit = e1000e_phy_sw_reset;
+	case e1000_phy_82578:
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+		phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		break;
+	default:
+		ret_val = -E1000_ERR_PHY;
+		break;
 	}
 
 	return ret_val;
@@ -305,17 +310,22 @@
 	phy->addr			= 1;
 	phy->reset_delay_us		= 100;
 
+	phy->ops.power_up               = e1000_power_up_phy_copper;
+	phy->ops.power_down             = e1000_power_down_phy_copper_ich8lan;
+
 	/*
 	 * We may need to do this twice - once for IGP and if that fails,
 	 * we'll set BM func pointers and try again
 	 */
 	ret_val = e1000e_determine_phy_address(hw);
 	if (ret_val) {
-		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
-		hw->phy.ops.read_phy_reg  = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.read_reg  = e1000e_read_phy_reg_bm;
 		ret_val = e1000e_determine_phy_address(hw);
-		if (ret_val)
+		if (ret_val) {
+			e_dbg("Cannot determine PHY addr. Erroring out\n");
 			return ret_val;
+		}
 	}
 
 	phy->id = 0;
@@ -332,29 +342,36 @@
 	case IGP03E1000_E_PHY_ID:
 		phy->type = e1000_phy_igp_3;
 		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-		phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked;
-		phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
+		phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
+		phy->ops.get_info = e1000e_get_phy_info_igp;
+		phy->ops.check_polarity = e1000_check_polarity_igp;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
 		break;
 	case IFE_E_PHY_ID:
 	case IFE_PLUS_E_PHY_ID:
 	case IFE_C_E_PHY_ID:
 		phy->type = e1000_phy_ife;
 		phy->autoneg_mask = E1000_ALL_NOT_GIG;
+		phy->ops.get_info = e1000_get_phy_info_ife;
+		phy->ops.check_polarity = e1000_check_polarity_ife;
+		phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
 		break;
 	case BME1000_E_PHY_ID:
 		phy->type = e1000_phy_bm;
 		phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-		hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm;
-		hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm;
-		hw->phy.ops.commit_phy = e1000e_phy_sw_reset;
+		phy->ops.read_reg = e1000e_read_phy_reg_bm;
+		phy->ops.write_reg = e1000e_write_phy_reg_bm;
+		phy->ops.commit = e1000e_phy_sw_reset;
+		phy->ops.get_info = e1000e_get_phy_info_m88;
+		phy->ops.check_polarity = e1000_check_polarity_m88;
+		phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
 		break;
 	default:
 		return -E1000_ERR_PHY;
 		break;
 	}
 
-	phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
-
 	return 0;
 }
 
@@ -374,7 +391,7 @@
 
 	/* Can't read flash registers if the register set isn't mapped. */
 	if (!hw->flash_address) {
-		hw_dbg(hw, "ERROR: Flash registers not mapped\n");
+		e_dbg("ERROR: Flash registers not mapped\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -407,7 +424,7 @@
 
 	/* Clear shadow ram */
 	for (i = 0; i < nvm->word_size; i++) {
-		dev_spec->shadow_ram[i].modified = 0;
+		dev_spec->shadow_ram[i].modified = false;
 		dev_spec->shadow_ram[i].value    = 0xFFFF;
 	}
 
@@ -436,7 +453,7 @@
 	if (mac->type == e1000_ich8lan)
 		mac->rar_entry_count--;
 	/* Set if manageability features are enabled. */
-	mac->arc_subsystem_valid = 1;
+	mac->arc_subsystem_valid = true;
 
 	/* LED operations */
 	switch (mac->type) {
@@ -470,7 +487,7 @@
 
 	/* Enable PCS Lock-loss workaround for ICH8 */
 	if (mac->type == e1000_ich8lan)
-		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1);
+		e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
 
 	return 0;
 }
@@ -556,7 +573,7 @@
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
 	if (ret_val)
-		hw_dbg(hw, "Error configuring flow control\n");
+		e_dbg("Error configuring flow control\n");
 
 out:
 	return ret_val;
@@ -636,8 +653,6 @@
 	u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
 	s32 ret_val = 0;
 
-	might_sleep();
-
 	mutex_lock(&swflag_mutex);
 
 	while (timeout) {
@@ -650,7 +665,7 @@
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n");
+		e_dbg("SW/FW/HW has locked the resource for too long.\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}
@@ -670,7 +685,7 @@
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Failed to acquire the semaphore.\n");
+		e_dbg("Failed to acquire the semaphore.\n");
 		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 		ew32(EXTCNF_CTRL, extcnf_ctrl);
 		ret_val = -E1000_ERR_CONFIG;
@@ -714,7 +729,9 @@
  **/
 static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
 {
-	u32 fwsm = er32(FWSM);
+	u32 fwsm;
+
+	fwsm = er32(FWSM);
 
 	return (fwsm & E1000_FWSM_MODE_MASK) ==
 		(E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
@@ -738,77 +755,6 @@
 }
 
 /**
- *  e1000_phy_force_speed_duplex_ich8lan - Force PHY speed & duplex
- *  @hw: pointer to the HW structure
- *
- *  Forces the speed and duplex settings of the PHY.
- *  This is a function pointer entry point only called by
- *  PHY setup routines.
- **/
-static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 data;
-	bool link;
-
-	if (phy->type != e1000_phy_ife) {
-		ret_val = e1000e_phy_force_speed_duplex_igp(hw);
-		return ret_val;
-	}
-
-	ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-
-	e1000e_phy_force_speed_duplex_setup(hw, &data);
-
-	ret_val = e1e_wphy(hw, PHY_CONTROL, data);
-	if (ret_val)
-		return ret_val;
-
-	/* Disable MDI-X support for 10/100 */
-	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-
-	data &= ~IFE_PMC_AUTO_MDIX;
-	data &= ~IFE_PMC_FORCE_MDIX;
-
-	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
-	if (ret_val)
-		return ret_val;
-
-	hw_dbg(hw, "IFE PMC: %X\n", data);
-
-	udelay(1);
-
-	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n");
-
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
-		if (ret_val)
-			return ret_val;
-
-		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
-
-		/* Try once more */
-		ret_val = e1000e_phy_has_link_generic(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
-		if (ret_val)
-			return ret_val;
-	}
-
-	return 0;
-}
-
-/**
  *  e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
  *  @hw:   pointer to the HW structure
  *
@@ -822,7 +768,7 @@
 	s32 ret_val;
 	u16 word_addr, reg_data, reg_addr, phy_page = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -918,7 +864,7 @@
 			reg_addr &= PHY_REG_MASK;
 			reg_addr |= phy_page;
 
-			ret_val = phy->ops.write_phy_reg_locked(hw,
+			ret_val = phy->ops.write_reg_locked(hw,
 			                                    (u32)reg_addr,
 			                                    reg_data);
 			if (ret_val)
@@ -927,7 +873,7 @@
 	}
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -951,15 +897,14 @@
 		goto out;
 
 	/* Wrap the whole flow with the sw flag */
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		goto out;
 
 	/* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
 	if (link) {
 		if (hw->phy.type == e1000_phy_82578) {
-			ret_val = hw->phy.ops.read_phy_reg_locked(hw,
-			                                          BM_CS_STATUS,
+			ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
 			                                          &status_reg);
 			if (ret_val)
 				goto release;
@@ -975,8 +920,7 @@
 		}
 
 		if (hw->phy.type == e1000_phy_82577) {
-			ret_val = hw->phy.ops.read_phy_reg_locked(hw,
-			                                          HV_M_STATUS,
+			ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
 			                                          &status_reg);
 			if (ret_val)
 				goto release;
@@ -992,14 +936,14 @@
 		}
 
 		/* Link stall fix for link up */
-		ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+		ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
 		                                           0x0100);
 		if (ret_val)
 			goto release;
 
 	} else {
 		/* Link stall fix for link down */
-		ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+		ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
 		                                           0x4100);
 		if (ret_val)
 			goto release;
@@ -1008,7 +952,7 @@
 	ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
 
 release:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -1023,7 +967,7 @@
  *
  *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
  **/
-static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 {
 	s32 ret_val = 0;
 	u32 ctrl_reg = 0;
@@ -1084,7 +1028,7 @@
 	if (hw->mac.type != e1000_pchlan)
 		return ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1098,7 +1042,7 @@
 
 	mac_reg = er32(PHY_CTRL);
 
-	ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+	ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg);
 	if (ret_val)
 		goto out;
 
@@ -1118,11 +1062,12 @@
 			oem_reg |= HV_OEM_BITS_LPLU;
 	}
 	/* Restart auto-neg to activate the bits */
-	oem_reg |= HV_OEM_BITS_RESTART_AN;
-	ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
+	if (!e1000_check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+	ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -1165,7 +1110,7 @@
 	}
 
 	/* Select page 0 */
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -1173,7 +1118,7 @@
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
 	if (ret_val)
 		goto out;
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	/*
 	 * Configure the K1 Si workaround during phy reset assuming there is
@@ -1209,7 +1154,7 @@
 	 * leave the PHY in a bad state possibly resulting in no link.
 	 */
 	if (loop == 0)
-		hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n");
+		e_dbg("LAN_INIT_DONE not set, increase timeout\n");
 
 	/* Clear the Init Done bit for the next init event */
 	data = er32(STATUS);
@@ -1261,122 +1206,6 @@
 }
 
 /**
- *  e1000_get_phy_info_ife_ich8lan - Retrieves various IFE PHY states
- *  @hw: pointer to the HW structure
- *
- *  Populates "phy" structure with various feature states.
- *  This function is only called by other family-specific
- *  routines.
- **/
-static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 data;
-	bool link;
-
-	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
-	if (ret_val)
-		return ret_val;
-
-	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
-		return -E1000_ERR_CONFIG;
-	}
-
-	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-	phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE));
-
-	if (phy->polarity_correction) {
-		ret_val = phy->ops.check_polarity(hw);
-		if (ret_val)
-			return ret_val;
-	} else {
-		/* Polarity is forced */
-		phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
-				      ? e1000_rev_polarity_reversed
-				      : e1000_rev_polarity_normal;
-	}
-
-	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
-	if (ret_val)
-		return ret_val;
-
-	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS);
-
-	/* The following parameters are undefined for 10/100 operation. */
-	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
-	phy->local_rx = e1000_1000t_rx_status_undefined;
-	phy->remote_rx = e1000_1000t_rx_status_undefined;
-
-	return 0;
-}
-
-/**
- *  e1000_get_phy_info_ich8lan - Calls appropriate PHY type get_phy_info
- *  @hw: pointer to the HW structure
- *
- *  Wrapper for calling the get_phy_info routines for the appropriate phy type.
- *  This is a function pointer entry point called by drivers
- *  or other shared routines.
- **/
-static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw)
-{
-	switch (hw->phy.type) {
-	case e1000_phy_ife:
-		return e1000_get_phy_info_ife_ich8lan(hw);
-		break;
-	case e1000_phy_igp_3:
-	case e1000_phy_bm:
-	case e1000_phy_82578:
-	case e1000_phy_82577:
-		return e1000e_get_phy_info_igp(hw);
-		break;
-	default:
-		break;
-	}
-
-	return -E1000_ERR_PHY_TYPE;
-}
-
-/**
- *  e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY
- *  @hw: pointer to the HW structure
- *
- *  Polarity is determined on the polarity reversal feature being enabled.
- *  This function is only called by other family-specific
- *  routines.
- **/
-static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw)
-{
-	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
-	u16 phy_data, offset, mask;
-
-	/*
-	 * Polarity is determined based on the reversal feature being enabled.
-	 */
-	if (phy->polarity_correction) {
-		offset	= IFE_PHY_EXTENDED_STATUS_CONTROL;
-		mask	= IFE_PESC_POLARITY_REVERSED;
-	} else {
-		offset	= IFE_PHY_SPECIAL_CONTROL;
-		mask	= IFE_PSC_FORCE_POLARITY;
-	}
-
-	ret_val = e1e_rphy(hw, offset, &phy_data);
-
-	if (!ret_val)
-		phy->cable_polarity = (phy_data & mask)
-				      ? e1000_rev_polarity_reversed
-				      : e1000_rev_polarity_normal;
-
-	return ret_val;
-}
-
-/**
  *  e1000_set_lplu_state_pchlan - Set Low Power Link Up state
  *  @hw: pointer to the HW structure
  *  @active: true to enable LPLU, false to disable
@@ -1411,7 +1240,7 @@
 /**
  *  e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D0 state according to the active flag.  When
  *  activating LPLU this function also disables smart speed
@@ -1497,7 +1326,7 @@
 /**
  *  e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
  *  @hw: pointer to the HW structure
- *  @active: TRUE to enable LPLU, FALSE to disable
+ *  @active: true to enable LPLU, false to disable
  *
  *  Sets the LPLU D3 state according to the active flag.  When
  *  activating LPLU this function also disables smart speed
@@ -1610,7 +1439,7 @@
 
 			return 0;
 		}
-		hw_dbg(hw, "Unable to determine valid NVM bank via EEC - "
+		e_dbg("Unable to determine valid NVM bank via EEC - "
 		       "reading flash signature\n");
 		/* fall-thru */
 	default:
@@ -1640,7 +1469,7 @@
 			return 0;
 		}
 
-		hw_dbg(hw, "ERROR: No valid NVM bank present\n");
+		e_dbg("ERROR: No valid NVM bank present\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1668,16 +1497,16 @@
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		ret_val = -E1000_ERR_NVM;
 		goto out;
 	}
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
 	}
 
@@ -1699,11 +1528,11 @@
 		}
 	}
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 
 out:
 	if (ret_val)
-		hw_dbg(hw, "NVM read error: %d\n", ret_val);
+		e_dbg("NVM read error: %d\n", ret_val);
 
 	return ret_val;
 }
@@ -1725,7 +1554,7 @@
 
 	/* Check if the flash descriptor is valid */
 	if (hsfsts.hsf_status.fldesvalid == 0) {
-		hw_dbg(hw, "Flash descriptor invalid.  "
+		e_dbg("Flash descriptor invalid.  "
 			 "SW Sequencing must be used.");
 		return -E1000_ERR_NVM;
 	}
@@ -1748,7 +1577,7 @@
 	if (hsfsts.hsf_status.flcinprog == 0) {
 		/*
 		 * There is no cycle running at present,
-		 * so we can start a cycle
+		 * so we can start a cycle.
 		 * Begin by setting Flash Cycle Done.
 		 */
 		hsfsts.hsf_status.flcdone = 1;
@@ -1756,7 +1585,7 @@
 		ret_val = 0;
 	} else {
 		/*
-		 * otherwise poll for sometime so the current
+		 * Otherwise poll for sometime so the current
 		 * cycle has a chance to end before giving up.
 		 */
 		for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
@@ -1775,7 +1604,7 @@
 			hsfsts.hsf_status.flcdone = 1;
 			ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
 		} else {
-			hw_dbg(hw, "Flash controller busy, cannot get access");
+			e_dbg("Flash controller busy, cannot get access");
 		}
 	}
 
@@ -1925,7 +1754,7 @@
 				/* Repeat for some time before giving up. */
 				continue;
 			} else if (hsfsts.hsf_status.flcdone == 0) {
-				hw_dbg(hw, "Timeout error - flash cycle "
+				e_dbg("Timeout error - flash cycle "
 					 "did not complete.");
 				break;
 			}
@@ -1953,18 +1782,18 @@
 
 	if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	for (i = 0; i < words; i++) {
-		dev_spec->shadow_ram[offset+i].modified = 1;
+		dev_spec->shadow_ram[offset+i].modified = true;
 		dev_spec->shadow_ram[offset+i].value = data[i];
 	}
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 
 	return 0;
 }
@@ -1995,7 +1824,7 @@
 	if (nvm->type != e1000_nvm_flash_sw)
 		goto out;
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	/*
 	 * We're writing to the opposite bank so if we're on bank 1,
@@ -2004,7 +1833,7 @@
 	 */
 	ret_val =  e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
 	if (ret_val) {
-		hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n");
+		e_dbg("Could not detect valid bank, assuming bank 0\n");
 		bank = 0;
 	}
 
@@ -2013,7 +1842,7 @@
 		old_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			goto out;
 		}
 	} else {
@@ -2021,7 +1850,7 @@
 		new_bank_offset = 0;
 		ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			goto out;
 		}
 	}
@@ -2078,8 +1907,8 @@
 	 */
 	if (ret_val) {
 		/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
-		hw_dbg(hw, "Flash commit failed.\n");
-		nvm->ops.release_nvm(hw);
+		e_dbg("Flash commit failed.\n");
+		nvm->ops.release(hw);
 		goto out;
 	}
 
@@ -2092,7 +1921,7 @@
 	act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
 	ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
 	if (ret_val) {
-		nvm->ops.release_nvm(hw);
+		nvm->ops.release(hw);
 		goto out;
 	}
 	data &= 0xBFFF;
@@ -2100,7 +1929,7 @@
 						       act_offset * 2 + 1,
 						       (u8)(data >> 8));
 	if (ret_val) {
-		nvm->ops.release_nvm(hw);
+		nvm->ops.release(hw);
 		goto out;
 	}
 
@@ -2113,17 +1942,17 @@
 	act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
 	ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
 	if (ret_val) {
-		nvm->ops.release_nvm(hw);
+		nvm->ops.release(hw);
 		goto out;
 	}
 
 	/* Great!  Everything worked, we can now clear the cached entries. */
 	for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
-		dev_spec->shadow_ram[i].modified = 0;
+		dev_spec->shadow_ram[i].modified = false;
 		dev_spec->shadow_ram[i].value = 0xFFFF;
 	}
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 
 	/*
 	 * Reload the EEPROM, or else modifications will not appear
@@ -2134,7 +1963,7 @@
 
 out:
 	if (ret_val)
-		hw_dbg(hw, "NVM update error: %d\n", ret_val);
+		e_dbg("NVM update error: %d\n", ret_val);
 
 	return ret_val;
 }
@@ -2192,7 +2021,7 @@
 	union ich8_hws_flash_status hsfsts;
 	u32 gfpreg;
 
-	nvm->ops.acquire_nvm(hw);
+	nvm->ops.acquire(hw);
 
 	gfpreg = er32flash(ICH_FLASH_GFPREG);
 
@@ -2213,7 +2042,7 @@
 	hsfsts.hsf_status.flockdn = true;
 	ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
 
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 }
 
 /**
@@ -2284,7 +2113,7 @@
 			/* Repeat for some time before giving up. */
 			continue;
 		if (hsfsts.hsf_status.flcdone == 0) {
-			hw_dbg(hw, "Timeout error - flash cycle "
+			e_dbg("Timeout error - flash cycle "
 				 "did not complete.");
 			break;
 		}
@@ -2329,7 +2158,7 @@
 		return ret_val;
 
 	for (program_retries = 0; program_retries < 100; program_retries++) {
-		hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset);
+		e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
 		udelay(100);
 		ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
 		if (!ret_val)
@@ -2359,9 +2188,7 @@
 	u32 flash_bank_size = nvm->flash_bank_size * 2;
 	s32 ret_val;
 	s32 count = 0;
-	s32 iteration;
-	s32 sector_size;
-	s32 j;
+	s32 j, iteration, sector_size;
 
 	hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
 
@@ -2464,7 +2291,7 @@
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -2594,10 +2421,10 @@
 	 */
 	ret_val = e1000e_disable_pcie_master(hw);
 	if (ret_val) {
-		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+		e_dbg("PCI-E Master disable polling has failed.\n");
 	}
 
-	hw_dbg(hw, "Masking off all interrupts\n");
+	e_dbg("Masking off all interrupts\n");
 	ew32(IMC, 0xffffffff);
 
 	/*
@@ -2648,8 +2475,7 @@
 		ctrl |= E1000_CTRL_PHY_RST;
 	}
 	ret_val = e1000_acquire_swflag_ich8lan(hw);
-	/* Whether or not the swflag was acquired, we need to reset the part */
-	hw_dbg(hw, "Issuing a global reset to ich8lan\n");
+	e_dbg("Issuing a global reset to ich8lan\n");
 	ew32(CTRL, (ctrl | E1000_CTRL_RST));
 	msleep(20);
 
@@ -2669,7 +2495,7 @@
 			 * return with an error. This can happen in situations
 			 * where there is no eeprom and prevents getting link.
 			 */
-			hw_dbg(hw, "Auto Read Done did not complete\n");
+			e_dbg("Auto Read Done did not complete\n");
 		}
 	}
 	/* Dummy read to clear the phy wakeup bit after lcd reset */
@@ -2730,16 +2556,15 @@
 
 	/* Initialize identification LED */
 	ret_val = mac->ops.id_led_init(hw);
-	if (ret_val) {
-		hw_dbg(hw, "Error initializing identification LED\n");
-		return ret_val;
-	}
+	if (ret_val)
+		e_dbg("Error initializing identification LED\n");
+		/* This is not fatal and we should not stop init due to this */
 
 	/* Setup the receive address. */
 	e1000e_init_rx_addrs(hw, mac->rar_entry_count);
 
 	/* Zero out the Multicast HASH table */
-	hw_dbg(hw, "Zeroing the MTA\n");
+	e_dbg("Zeroing the MTA\n");
 	for (i = 0; i < mac->mta_reg_count; i++)
 		E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
 
@@ -2749,7 +2574,7 @@
 	 * Reset the phy after disabling host wakeup to reset the Rx buffer.
 	 */
 	if (hw->phy.type == e1000_phy_82578) {
-		hw->phy.ops.read_phy_reg(hw, BM_WUC, &i);
+		hw->phy.ops.read_reg(hw, BM_WUC, &i);
 		ret_val = e1000_phy_hw_reset_ich8lan(hw);
 		if (ret_val)
 			return ret_val;
@@ -2885,7 +2710,7 @@
 	 */
 	hw->fc.current_mode = hw->fc.requested_mode;
 
-	hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+	e_dbg("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
 	/* Continue to configure the copper link. */
@@ -2896,7 +2721,7 @@
 	ew32(FCTTV, hw->fc.pause_time);
 	if ((hw->phy.type == e1000_phy_82578) ||
 	    (hw->phy.type == e1000_phy_82577)) {
-		ret_val = hw->phy.ops.write_phy_reg(hw,
+		ret_val = hw->phy.ops.write_reg(hw,
 		                             PHY_REG(BM_PORT_CTRL_PAGE, 27),
 		                             hw->fc.pause_time);
 		if (ret_val)
@@ -2959,7 +2784,7 @@
 			return ret_val;
 		break;
 	case e1000_phy_ife:
-		ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL,
 		                               &reg_data);
 		if (ret_val)
 			return ret_val;
@@ -2978,7 +2803,7 @@
 			reg_data |= IFE_PMC_AUTO_MDIX;
 			break;
 		}
-		ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL,
+		ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL,
 		                                reg_data);
 		if (ret_val)
 			return ret_val;
@@ -3091,8 +2916,8 @@
  *  @hw: pointer to the HW structure
  *  @state: boolean value used to set the current Kumeran workaround state
  *
- *  If ICH8, set the current Kumeran workaround state (enabled - TRUE
- *  /disabled - FALSE).
+ *  If ICH8, set the current Kumeran workaround state (enabled - true
+ *  /disabled - false).
  **/
 void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
 						 bool state)
@@ -3100,7 +2925,7 @@
 	struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
 
 	if (hw->mac.type != e1000_ich8lan) {
-		hw_dbg(hw, "Workaround applies to ICH8 only.\n");
+		e_dbg("Workaround applies to ICH8 only.\n");
 		return;
 	}
 
@@ -3208,6 +3033,7 @@
 	u32 phy_ctrl;
 
 	switch (hw->mac.type) {
+	case e1000_ich8lan:
 	case e1000_ich9lan:
 	case e1000_ich10lan:
 	case e1000_pchlan:
@@ -3280,7 +3106,7 @@
  **/
 static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
 {
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
 					(u16)hw->mac.ledctl_mode1);
 }
 
@@ -3292,7 +3118,7 @@
  **/
 static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
 {
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG,
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG,
 					(u16)hw->mac.ledctl_default);
 }
 
@@ -3324,7 +3150,7 @@
 		}
 	}
 
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
 }
 
 /**
@@ -3355,7 +3181,7 @@
 		}
 	}
 
-	return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data);
+	return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data);
 }
 
 /**
@@ -3378,8 +3204,7 @@
 		if (status & E1000_STATUS_PHYRA)
 			ew32(STATUS, status & ~E1000_STATUS_PHYRA);
 		else
-			hw_dbg(hw,
-			       "PHY Reset Asserted not set - needs delay\n");
+			e_dbg("PHY Reset Asserted not set - needs delay\n");
 	}
 
 	e1000e_get_cfg_done(hw);
@@ -3394,7 +3219,7 @@
 	} else {
 		if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
 			/* Maybe we should do a basic PHY config */
-			hw_dbg(hw, "EEPROM not present\n");
+			e_dbg("EEPROM not present\n");
 			return -E1000_ERR_CONFIG;
 		}
 	}
@@ -3403,6 +3228,23 @@
 }
 
 /**
+ * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
+{
+	/* If the management interface is not enabled, then power down */
+	if (!(hw->mac.ops.check_mng_mode(hw) ||
+	      hw->phy.ops.check_reset_block(hw)))
+		e1000_power_down_phy_copper(hw);
+
+	return;
+}
+
+/**
  *  e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
  *  @hw: pointer to the HW structure
  *
@@ -3411,42 +3253,41 @@
  **/
 static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
 {
-	u32 temp;
 	u16 phy_data;
 
 	e1000e_clear_hw_cntrs_base(hw);
 
-	temp = er32(ALGNERRC);
-	temp = er32(RXERRC);
-	temp = er32(TNCRS);
-	temp = er32(CEXTERR);
-	temp = er32(TSCTC);
-	temp = er32(TSCTFC);
+	er32(ALGNERRC);
+	er32(RXERRC);
+	er32(TNCRS);
+	er32(CEXTERR);
+	er32(TSCTC);
+	er32(TSCTFC);
 
-	temp = er32(MGTPRC);
-	temp = er32(MGTPDC);
-	temp = er32(MGTPTC);
+	er32(MGTPRC);
+	er32(MGTPDC);
+	er32(MGTPTC);
 
-	temp = er32(IAC);
-	temp = er32(ICRXOC);
+	er32(IAC);
+	er32(ICRXOC);
 
 	/* Clear PHY statistics registers */
 	if ((hw->phy.type == e1000_phy_82578) ||
 	    (hw->phy.type == e1000_phy_82577)) {
-		hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data);
-		hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data);
+		hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data);
 	}
 }
 
@@ -3469,29 +3310,27 @@
 };
 
 static struct e1000_phy_operations ich8_phy_ops = {
-	.acquire_phy		= e1000_acquire_swflag_ich8lan,
+	.acquire		= e1000_acquire_swflag_ich8lan,
 	.check_reset_block	= e1000_check_reset_block_ich8lan,
-	.commit_phy		= NULL,
-	.force_speed_duplex	= e1000_phy_force_speed_duplex_ich8lan,
+	.commit			= NULL,
 	.get_cfg_done		= e1000_get_cfg_done_ich8lan,
 	.get_cable_length	= e1000e_get_cable_length_igp_2,
-	.get_phy_info		= e1000_get_phy_info_ich8lan,
-	.read_phy_reg		= e1000e_read_phy_reg_igp,
-	.release_phy		= e1000_release_swflag_ich8lan,
-	.reset_phy		= e1000_phy_hw_reset_ich8lan,
+	.read_reg		= e1000e_read_phy_reg_igp,
+	.release		= e1000_release_swflag_ich8lan,
+	.reset			= e1000_phy_hw_reset_ich8lan,
 	.set_d0_lplu_state	= e1000_set_d0_lplu_state_ich8lan,
 	.set_d3_lplu_state	= e1000_set_d3_lplu_state_ich8lan,
-	.write_phy_reg		= e1000e_write_phy_reg_igp,
+	.write_reg		= e1000e_write_phy_reg_igp,
 };
 
 static struct e1000_nvm_operations ich8_nvm_ops = {
-	.acquire_nvm		= e1000_acquire_nvm_ich8lan,
-	.read_nvm	 	= e1000_read_nvm_ich8lan,
-	.release_nvm		= e1000_release_nvm_ich8lan,
-	.update_nvm		= e1000_update_nvm_checksum_ich8lan,
+	.acquire		= e1000_acquire_nvm_ich8lan,
+	.read		 	= e1000_read_nvm_ich8lan,
+	.release		= e1000_release_nvm_ich8lan,
+	.update			= e1000_update_nvm_checksum_ich8lan,
 	.valid_led_default	= e1000_valid_led_default_ich8lan,
-	.validate_nvm		= e1000_validate_nvm_checksum_ich8lan,
-	.write_nvm		= e1000_write_nvm_ich8lan,
+	.validate		= e1000_validate_nvm_checksum_ich8lan,
+	.write			= e1000_write_nvm_ich8lan,
 };
 
 struct e1000_info e1000_ich8_info = {
@@ -3558,6 +3397,7 @@
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_FLASH
 				  | FLAG_HAS_JUMBO_FRAMES
+				  | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
 				  | FLAG_APME_IN_WUC,
 	.pba			= 26,
 	.max_hw_frame_size	= 4096,
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 99ba2b8..a86c175 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -26,11 +26,6 @@
 
 *******************************************************************************/
 
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
 #include "e1000.h"
 
 enum e1000_mng_mode {
@@ -87,7 +82,24 @@
 }
 
 /**
- *  e1000e_write_vfta - Write value to VLAN filter table
+ *  e1000_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to the HW structure
+ *
+ *  Clears the register array which contains the VLAN filter table by
+ *  setting all the values to 0.
+ **/
+void e1000_clear_vfta_generic(struct e1000_hw *hw)
+{
+	u32 offset;
+
+	for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+		E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
+		e1e_flush();
+	}
+}
+
+/**
+ *  e1000_write_vfta_generic - Write value to VLAN filter table
  *  @hw: pointer to the HW structure
  *  @offset: register offset in VLAN filter table
  *  @value: register value written to VLAN filter table
@@ -95,7 +107,7 @@
  *  Writes value at the given offset in the register array which stores
  *  the VLAN filter table.
  **/
-void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
 {
 	E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
 	e1e_flush();
@@ -115,12 +127,12 @@
 	u32 i;
 
 	/* Setup the receive address */
-	hw_dbg(hw, "Programming MAC Address into RAR[0]\n");
+	e_dbg("Programming MAC Address into RAR[0]\n");
 
 	e1000e_rar_set(hw, hw->mac.addr, 0);
 
 	/* Zero out the other (rar_entry_count - 1) receive addresses */
-	hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1);
+	e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
 	for (i = 1; i < rar_count; i++) {
 		E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0);
 		e1e_flush();
@@ -276,7 +288,7 @@
 	for (; mc_addr_count > 0; mc_addr_count--) {
 		u32 hash_value, hash_reg, hash_bit, mta;
 		hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-		hw_dbg(hw, "Hash value = 0x%03X\n", hash_value);
+		e_dbg("Hash value = 0x%03X\n", hash_value);
 		hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
 		hash_bit = hash_value & 0x1F;
 		mta = (1 << hash_bit);
@@ -300,45 +312,43 @@
  **/
 void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
 {
-	u32 temp;
-
-	temp = er32(CRCERRS);
-	temp = er32(SYMERRS);
-	temp = er32(MPC);
-	temp = er32(SCC);
-	temp = er32(ECOL);
-	temp = er32(MCC);
-	temp = er32(LATECOL);
-	temp = er32(COLC);
-	temp = er32(DC);
-	temp = er32(SEC);
-	temp = er32(RLEC);
-	temp = er32(XONRXC);
-	temp = er32(XONTXC);
-	temp = er32(XOFFRXC);
-	temp = er32(XOFFTXC);
-	temp = er32(FCRUC);
-	temp = er32(GPRC);
-	temp = er32(BPRC);
-	temp = er32(MPRC);
-	temp = er32(GPTC);
-	temp = er32(GORCL);
-	temp = er32(GORCH);
-	temp = er32(GOTCL);
-	temp = er32(GOTCH);
-	temp = er32(RNBC);
-	temp = er32(RUC);
-	temp = er32(RFC);
-	temp = er32(ROC);
-	temp = er32(RJC);
-	temp = er32(TORL);
-	temp = er32(TORH);
-	temp = er32(TOTL);
-	temp = er32(TOTH);
-	temp = er32(TPR);
-	temp = er32(TPT);
-	temp = er32(MPTC);
-	temp = er32(BPTC);
+	er32(CRCERRS);
+	er32(SYMERRS);
+	er32(MPC);
+	er32(SCC);
+	er32(ECOL);
+	er32(MCC);
+	er32(LATECOL);
+	er32(COLC);
+	er32(DC);
+	er32(SEC);
+	er32(RLEC);
+	er32(XONRXC);
+	er32(XONTXC);
+	er32(XOFFRXC);
+	er32(XOFFTXC);
+	er32(FCRUC);
+	er32(GPRC);
+	er32(BPRC);
+	er32(MPRC);
+	er32(GPTC);
+	er32(GORCL);
+	er32(GORCH);
+	er32(GOTCL);
+	er32(GOTCH);
+	er32(RNBC);
+	er32(RUC);
+	er32(RFC);
+	er32(ROC);
+	er32(RJC);
+	er32(TORL);
+	er32(TORH);
+	er32(TOTL);
+	er32(TOTH);
+	er32(TPR);
+	er32(TPT);
+	er32(MPTC);
+	er32(BPTC);
 }
 
 /**
@@ -376,7 +386,7 @@
 	if (!link)
 		return ret_val; /* No link detected */
 
-	mac->get_link_status = 0;
+	mac->get_link_status = false;
 
 	/*
 	 * Check if there was DownShift, must be checked
@@ -408,7 +418,7 @@
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error configuring flow control\n");
+		e_dbg("Error configuring flow control\n");
 	}
 
 	return ret_val;
@@ -448,7 +458,7 @@
 			mac->autoneg_failed = 1;
 			return 0;
 		}
-		hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -461,7 +471,7 @@
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000e_config_fc_after_link_up(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -471,7 +481,7 @@
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, mac->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -513,7 +523,7 @@
 			mac->autoneg_failed = 1;
 			return 0;
 		}
-		hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n");
+		e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
 
 		/* Disable auto-negotiation in the TXCW register */
 		ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
@@ -526,7 +536,7 @@
 		/* Configure Flow Control after forcing link up. */
 		ret_val = e1000e_config_fc_after_link_up(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error configuring flow control\n");
+			e_dbg("Error configuring flow control\n");
 			return ret_val;
 		}
 	} else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
@@ -536,7 +546,7 @@
 		 * and disable forced link in the Device Control register
 		 * in an attempt to auto-negotiate with our link partner.
 		 */
-		hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n");
+		e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
 		ew32(TXCW, mac->txcw);
 		ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 
@@ -553,11 +563,11 @@
 		if (rxcw & E1000_RXCW_SYNCH) {
 			if (!(rxcw & E1000_RXCW_IV)) {
 				mac->serdes_has_link = true;
-				hw_dbg(hw, "SERDES: Link up - forced.\n");
+				e_dbg("SERDES: Link up - forced.\n");
 			}
 		} else {
 			mac->serdes_has_link = false;
-			hw_dbg(hw, "SERDES: Link down - force failed.\n");
+			e_dbg("SERDES: Link down - force failed.\n");
 		}
 	}
 
@@ -570,20 +580,20 @@
 			if (rxcw & E1000_RXCW_SYNCH) {
 				if (!(rxcw & E1000_RXCW_IV)) {
 					mac->serdes_has_link = true;
-					hw_dbg(hw, "SERDES: Link up - autoneg "
+					e_dbg("SERDES: Link up - autoneg "
 					   "completed sucessfully.\n");
 				} else {
 					mac->serdes_has_link = false;
-					hw_dbg(hw, "SERDES: Link down - invalid"
+					e_dbg("SERDES: Link down - invalid"
 					   "codewords detected in autoneg.\n");
 				}
 			} else {
 				mac->serdes_has_link = false;
-				hw_dbg(hw, "SERDES: Link down - no sync.\n");
+				e_dbg("SERDES: Link down - no sync.\n");
 			}
 		} else {
 			mac->serdes_has_link = false;
-			hw_dbg(hw, "SERDES: Link down - autoneg failed\n");
+			e_dbg("SERDES: Link down - autoneg failed\n");
 		}
 	}
 
@@ -614,7 +624,7 @@
 	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
 
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -667,7 +677,7 @@
 	 */
 	hw->fc.current_mode = hw->fc.requested_mode;
 
-	hw_dbg(hw, "After fix-ups FlowControl is now = %x\n",
+	e_dbg("After fix-ups FlowControl is now = %x\n",
 		hw->fc.current_mode);
 
 	/* Call the necessary media_type subroutine to configure the link. */
@@ -681,7 +691,7 @@
 	 * control is disabled, because it does not hurt anything to
 	 * initialize these registers.
 	 */
-	hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n");
+	e_dbg("Initializing the Flow Control address, type and timer regs\n");
 	ew32(FCT, FLOW_CONTROL_TYPE);
 	ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
 	ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
@@ -751,7 +761,7 @@
 		txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 		break;
 	}
@@ -789,7 +799,7 @@
 			break;
 	}
 	if (i == FIBER_LINK_UP_LIMIT) {
-		hw_dbg(hw, "Never got a valid link from auto-neg!!!\n");
+		e_dbg("Never got a valid link from auto-neg!!!\n");
 		mac->autoneg_failed = 1;
 		/*
 		 * AutoNeg failed to achieve a link, so we'll call
@@ -799,13 +809,13 @@
 		 */
 		ret_val = mac->ops.check_for_link(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while checking for link\n");
+			e_dbg("Error while checking for link\n");
 			return ret_val;
 		}
 		mac->autoneg_failed = 0;
 	} else {
 		mac->autoneg_failed = 0;
-		hw_dbg(hw, "Valid Link Found\n");
+		e_dbg("Valid Link Found\n");
 	}
 
 	return 0;
@@ -841,7 +851,7 @@
 	 * then the link-up status bit will be set and the flow control enable
 	 * bits (RFCE and TFCE) will be set according to their negotiated value.
 	 */
-	hw_dbg(hw, "Auto-negotiation enabled\n");
+	e_dbg("Auto-negotiation enabled\n");
 
 	ew32(CTRL, ctrl);
 	e1e_flush();
@@ -856,7 +866,7 @@
 	    (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
 		ret_val = e1000_poll_fiber_serdes_link_generic(hw);
 	} else {
-		hw_dbg(hw, "No signal detected\n");
+		e_dbg("No signal detected\n");
 	}
 
 	return 0;
@@ -952,7 +962,7 @@
 	 *      3:  Both Rx and Tx flow control (symmetric) is enabled.
 	 *  other:  No other values should be possible at this point.
 	 */
-	hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode);
+	e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
 
 	switch (hw->fc.current_mode) {
 	case e1000_fc_none:
@@ -970,7 +980,7 @@
 		ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1011,7 +1021,7 @@
 	}
 
 	if (ret_val) {
-		hw_dbg(hw, "Error forcing flow control settings\n");
+		e_dbg("Error forcing flow control settings\n");
 		return ret_val;
 	}
 
@@ -1035,7 +1045,7 @@
 			return ret_val;
 
 		if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
-			hw_dbg(hw, "Copper PHY and Auto Neg "
+			e_dbg("Copper PHY and Auto Neg "
 				 "has not completed.\n");
 			return ret_val;
 		}
@@ -1076,7 +1086,6 @@
 		 *   1   |    1    |   0   |    0    | e1000_fc_none
 		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
 		 *
-		 *
 		 * Are both PAUSE bits set to 1?  If so, this implies
 		 * Symmetric Flow Control is enabled at both ends.  The
 		 * ASM_DIR bits are irrelevant per the spec.
@@ -1100,10 +1109,10 @@
 			 */
 			if (hw->fc.requested_mode == e1000_fc_full) {
 				hw->fc.current_mode = e1000_fc_full;
-				hw_dbg(hw, "Flow Control = FULL.\r\n");
+				e_dbg("Flow Control = FULL.\r\n");
 			} else {
 				hw->fc.current_mode = e1000_fc_rx_pause;
-				hw_dbg(hw, "Flow Control = "
+				e_dbg("Flow Control = "
 					 "RX PAUSE frames only.\r\n");
 			}
 		}
@@ -1114,14 +1123,13 @@
 		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
 		 *-------|---------|-------|---------|--------------------
 		 *   0   |    1    |   1   |    1    | e1000_fc_tx_pause
-		 *
 		 */
 		else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
 			  (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
 			  (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
 			  (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 			hw->fc.current_mode = e1000_fc_tx_pause;
-			hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n");
+			e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
 		}
 		/*
 		 * For transmitting PAUSE frames ONLY.
@@ -1130,21 +1138,20 @@
 		 * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
 		 *-------|---------|-------|---------|--------------------
 		 *   1   |    1    |   0   |    1    | e1000_fc_rx_pause
-		 *
 		 */
 		else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
 			 (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
 			 !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
 			 (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
 			hw->fc.current_mode = e1000_fc_rx_pause;
-			hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n");
+			e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
 		} else {
 			/*
 			 * Per the IEEE spec, at this point flow control
 			 * should be disabled.
 			 */
 			hw->fc.current_mode = e1000_fc_none;
-			hw_dbg(hw, "Flow Control = NONE.\r\n");
+			e_dbg("Flow Control = NONE.\r\n");
 		}
 
 		/*
@@ -1154,7 +1161,7 @@
 		 */
 		ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
 		if (ret_val) {
-			hw_dbg(hw, "Error getting link speed and duplex\n");
+			e_dbg("Error getting link speed and duplex\n");
 			return ret_val;
 		}
 
@@ -1167,7 +1174,7 @@
 		 */
 		ret_val = e1000e_force_mac_fc(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error forcing flow control settings\n");
+			e_dbg("Error forcing flow control settings\n");
 			return ret_val;
 		}
 	}
@@ -1191,21 +1198,21 @@
 	status = er32(STATUS);
 	if (status & E1000_STATUS_SPEED_1000) {
 		*speed = SPEED_1000;
-		hw_dbg(hw, "1000 Mbs, ");
+		e_dbg("1000 Mbs, ");
 	} else if (status & E1000_STATUS_SPEED_100) {
 		*speed = SPEED_100;
-		hw_dbg(hw, "100 Mbs, ");
+		e_dbg("100 Mbs, ");
 	} else {
 		*speed = SPEED_10;
-		hw_dbg(hw, "10 Mbs, ");
+		e_dbg("10 Mbs, ");
 	}
 
 	if (status & E1000_STATUS_FD) {
 		*duplex = FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	} else {
 		*duplex = HALF_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	}
 
 	return 0;
@@ -1251,7 +1258,7 @@
 	}
 
 	if (i == timeout) {
-		hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n");
+		e_dbg("Driver can't access device - SMBI bit is set.\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1270,7 +1277,7 @@
 	if (i == timeout) {
 		/* Release semaphores */
 		e1000e_put_hw_semaphore(hw);
-		hw_dbg(hw, "Driver can't access the NVM\n");
+		e_dbg("Driver can't access the NVM\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1310,7 +1317,7 @@
 	}
 
 	if (i == AUTO_READ_DONE_TIMEOUT) {
-		hw_dbg(hw, "Auto read by HW from NVM has not completed.\n");
+		e_dbg("Auto read by HW from NVM has not completed.\n");
 		return -E1000_ERR_RESET;
 	}
 
@@ -1331,7 +1338,7 @@
 
 	ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 
@@ -1585,7 +1592,7 @@
 	}
 
 	if (!timeout) {
-		hw_dbg(hw, "Master requests are pending.\n");
+		e_dbg("Master requests are pending.\n");
 		return -E1000_ERR_MASTER_REQUESTS_PENDING;
 	}
 
@@ -1608,7 +1615,7 @@
 	mac->ifs_step_size = IFS_STEP;
 	mac->ifs_ratio = IFS_RATIO;
 
-	mac->in_ifs_mode = 0;
+	mac->in_ifs_mode = false;
 	ew32(AIT, 0);
 }
 
@@ -1625,7 +1632,7 @@
 
 	if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
 		if (mac->tx_packet_delta > MIN_NUM_XMITS) {
-			mac->in_ifs_mode = 1;
+			mac->in_ifs_mode = true;
 			if (mac->current_ifs_val < mac->ifs_max_val) {
 				if (!mac->current_ifs_val)
 					mac->current_ifs_val = mac->ifs_min_val;
@@ -1639,7 +1646,7 @@
 		if (mac->in_ifs_mode &&
 		    (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
 			mac->current_ifs_val = 0;
-			mac->in_ifs_mode = 0;
+			mac->in_ifs_mode = false;
 			ew32(AIT, 0);
 		}
 	}
@@ -1809,7 +1816,7 @@
 	if (!timeout) {
 		eecd &= ~E1000_EECD_REQ;
 		ew32(EECD, eecd);
-		hw_dbg(hw, "Could not acquire NVM grant\n");
+		e_dbg("Could not acquire NVM grant\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1914,7 +1921,7 @@
 		}
 
 		if (!timeout) {
-			hw_dbg(hw, "SPI NVM Status error\n");
+			e_dbg("SPI NVM Status error\n");
 			return -E1000_ERR_NVM;
 		}
 	}
@@ -1943,7 +1950,7 @@
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -1986,11 +1993,11 @@
 	 */
 	if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
 	    (words == 0)) {
-		hw_dbg(hw, "nvm parameter(s) out of bounds\n");
+		e_dbg("nvm parameter(s) out of bounds\n");
 		return -E1000_ERR_NVM;
 	}
 
-	ret_val = nvm->ops.acquire_nvm(hw);
+	ret_val = nvm->ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2001,7 +2008,7 @@
 
 		ret_val = e1000_ready_nvm_eeprom(hw);
 		if (ret_val) {
-			nvm->ops.release_nvm(hw);
+			nvm->ops.release(hw);
 			return ret_val;
 		}
 
@@ -2040,7 +2047,7 @@
 	}
 
 	msleep(10);
-	nvm->ops.release_nvm(hw);
+	nvm->ops.release(hw);
 	return 0;
 }
 
@@ -2066,7 +2073,7 @@
 		ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
 					 &mac_addr_offset);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		if (mac_addr_offset == 0xFFFF)
@@ -2081,7 +2088,7 @@
 			ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
 						 &nvm_data);
 			if (ret_val) {
-				hw_dbg(hw, "NVM Read Error\n");
+				e_dbg("NVM Read Error\n");
 				return ret_val;
 			}
 			if (nvm_data & 0x0001)
@@ -2096,7 +2103,7 @@
 		offset = mac_addr_offset + (i >> 1);
 		ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
@@ -2129,14 +2136,14 @@
 	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
 		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error\n");
+			e_dbg("NVM Read Error\n");
 			return ret_val;
 		}
 		checksum += nvm_data;
 	}
 
 	if (checksum != (u16) NVM_SUM) {
-		hw_dbg(hw, "NVM Checksum Invalid\n");
+		e_dbg("NVM Checksum Invalid\n");
 		return -E1000_ERR_NVM;
 	}
 
@@ -2160,7 +2167,7 @@
 	for (i = 0; i < NVM_CHECKSUM_REG; i++) {
 		ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
 		if (ret_val) {
-			hw_dbg(hw, "NVM Read Error while updating checksum.\n");
+			e_dbg("NVM Read Error while updating checksum.\n");
 			return ret_val;
 		}
 		checksum += nvm_data;
@@ -2168,7 +2175,7 @@
 	checksum = (u16) NVM_SUM - checksum;
 	ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
 	if (ret_val)
-		hw_dbg(hw, "NVM Write Error while updating checksum.\n");
+		e_dbg("NVM Write Error while updating checksum.\n");
 
 	return ret_val;
 }
@@ -2231,7 +2238,7 @@
 	/* Check that the host interface is enabled. */
 	hicr = er32(HICR);
 	if ((hicr & E1000_HICR_EN) == 0) {
-		hw_dbg(hw, "E1000_HOST_EN bit disabled.\n");
+		e_dbg("E1000_HOST_EN bit disabled.\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
 	/* check the previous command is completed */
@@ -2243,7 +2250,7 @@
 	}
 
 	if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
-		hw_dbg(hw, "Previous command timeout failed .\n");
+		e_dbg("Previous command timeout failed .\n");
 		return -E1000_ERR_HOST_INTERFACE_COMMAND;
 	}
 
@@ -2282,7 +2289,7 @@
 
 	/* No manageability, no filtering */
 	if (!e1000e_check_mng_mode(hw)) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return 0;
 	}
 
@@ -2292,7 +2299,7 @@
 	 */
 	ret_val = e1000_mng_enable_host_if(hw);
 	if (ret_val != 0) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return ret_val;
 	}
 
@@ -2311,17 +2318,17 @@
 	 * take the safe route of assuming Tx filtering is enabled.
 	 */
 	if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
-		hw->mac.tx_pkt_filtering = 1;
+		hw->mac.tx_pkt_filtering = true;
 		return 1;
 	}
 
 	/* Cookie area is valid, make the final check for filtering. */
 	if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
-		hw->mac.tx_pkt_filtering = 0;
+		hw->mac.tx_pkt_filtering = false;
 		return 0;
 	}
 
-	hw->mac.tx_pkt_filtering = 1;
+	hw->mac.tx_pkt_filtering = true;
 	return 1;
 }
 
@@ -2353,7 +2360,7 @@
 }
 
 /**
- *  e1000_mng_host_if_write - Writes to the manageability host interface
+ *  e1000_mng_host_if_write - Write to the manageability host interface
  *  @hw: pointer to the HW structure
  *  @buffer: pointer to the host interface buffer
  *  @length: size of the buffer
@@ -2478,7 +2485,7 @@
 {
 	u32 manc;
 	u32 fwsm, factps;
-	bool ret_val = 0;
+	bool ret_val = false;
 
 	manc = er32(MANC);
 
@@ -2493,13 +2500,13 @@
 		if (!(factps & E1000_FACTPS_MNGCG) &&
 		    ((fwsm & E1000_FWSM_MODE_MASK) ==
 		     (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
-			ret_val = 1;
+			ret_val = true;
 			return ret_val;
 		}
 	} else {
 		if ((manc & E1000_MANC_SMBUS_EN) &&
 		    !(manc & E1000_MANC_ASF_EN)) {
-			ret_val = 1;
+			ret_val = true;
 			return ret_val;
 		}
 	}
@@ -2514,14 +2521,14 @@
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 	*pba_num = (u32)(nvm_data << 16);
 
 	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
 	if (ret_val) {
-		hw_dbg(hw, "NVM Read Error\n");
+		e_dbg("NVM Read Error\n");
 		return ret_val;
 	}
 	*pba_num |= nvm_data;
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0687c6a..c3105c5 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -65,17 +65,6 @@
 	[board_pchlan]		= &e1000_pch_info,
 };
 
-#ifdef DEBUG
-/**
- * e1000_get_hw_dev_name - return device name string
- * used by hardware layer to print debugging information
- **/
-char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
-{
-	return hw->adapter->netdev->name;
-}
-#endif
-
 /**
  * e1000_desc_unused - calculate if we have unused descriptors
  **/
@@ -167,7 +156,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+	unsigned int bufsz = adapter->rx_buffer_len;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -179,20 +168,13 @@
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (!skb) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 map_skb:
 		buffer_info->dma = pci_map_single(pdev, skb->data,
@@ -284,21 +266,14 @@
 			     cpu_to_le64(ps_page->dma);
 		}
 
-		skb = netdev_alloc_skb(netdev,
-				       adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(netdev,
+						adapter->rx_ps_bsize0);
 
 		if (!skb) {
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_ps_bsize0,
@@ -359,9 +334,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = 256 -
-	                     16 /* for skb_reserve */ -
-	                     NET_IP_ALIGN;
+	unsigned int bufsz = 256 - 16 /* for skb_reserve */;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -373,19 +346,13 @@
 			goto check_page;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 check_page:
 		/* allocate a new page if necessary */
@@ -437,6 +404,7 @@
 {
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
+	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_ring *rx_ring = adapter->rx_ring;
 	struct e1000_rx_desc *rx_desc, *next_rxd;
 	struct e1000_buffer *buffer_info, *next_buffer;
@@ -486,8 +454,7 @@
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			e_dbg("%s: Receive packet consumed multiple buffers\n",
-			      netdev->name);
+			e_dbg("Receive packet consumed multiple buffers\n");
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -513,9 +480,8 @@
 		 */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -560,33 +526,52 @@
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
 static void e1000_put_txbuf(struct e1000_adapter *adapter,
 			     struct e1000_buffer *buffer_info)
 {
-	buffer_info->dma = 0;
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev, buffer_info->dma,
+				       buffer_info->length, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev,	buffer_info->dma,
+					 buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
+	}
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
 	buffer_info->time_stamp = 0;
 }
 
-static void e1000_print_tx_hang(struct e1000_adapter *adapter)
+static void e1000_print_hw_hang(struct work_struct *work)
 {
+	struct e1000_adapter *adapter = container_of(work,
+	                                             struct e1000_adapter,
+	                                             print_hang_task);
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 phy_status, phy_1000t_status, phy_ext_status;
+	u16 pci_status;
 
-	/* detected Tx unit hang */
-	e_err("Detected Tx Unit Hang:\n"
+	e1e_rphy(hw, PHY_STATUS, &phy_status);
+	e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
+	e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
+
+	pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
+
+	/* detected Hardware unit hang */
+	e_err("Detected Hardware Unit Hang:\n"
 	      "  TDH                  <%x>\n"
 	      "  TDT                  <%x>\n"
 	      "  next_to_use          <%x>\n"
@@ -595,7 +580,12 @@
 	      "  time_stamp           <%lx>\n"
 	      "  next_to_watch        <%x>\n"
 	      "  jiffies              <%lx>\n"
-	      "  next_to_watch.status <%x>\n",
+	      "  next_to_watch.status <%x>\n"
+	      "MAC Status             <%x>\n"
+	      "PHY Status             <%x>\n"
+	      "PHY 1000BASE-T Status  <%x>\n"
+	      "PHY Extended Status    <%x>\n"
+	      "PCI Status             <%x>\n",
 	      readl(adapter->hw.hw_addr + tx_ring->head),
 	      readl(adapter->hw.hw_addr + tx_ring->tail),
 	      tx_ring->next_to_use,
@@ -603,7 +593,12 @@
 	      tx_ring->buffer_info[eop].time_stamp,
 	      eop,
 	      jiffies,
-	      eop_desc->upper.fields.status);
+	      eop_desc->upper.fields.status,
+	      er32(STATUS),
+	      phy_status,
+	      phy_1000t_status,
+	      phy_ext_status,
+	      pci_status);
 }
 
 /**
@@ -677,21 +672,23 @@
 	}
 
 	if (adapter->detect_tx_hung) {
-		/* Detect a transmit hang in hardware, this serializes the
-		 * check with the clearing of time_stamp and movement of i */
+		/*
+		 * Detect a transmit hang in hardware, this serializes the
+		 * check with the clearing of time_stamp and movement of i
+		 */
 		adapter->detect_tx_hung = 0;
 		if (tx_ring->buffer_info[i].time_stamp &&
 		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp
-			       + (adapter->tx_timeout_factor * HZ))
-		    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
-			e1000_print_tx_hang(adapter);
+			       + (adapter->tx_timeout_factor * HZ)) &&
+		    !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+			schedule_work(&adapter->print_hang_task);
 			netif_stop_queue(netdev);
 		}
 	}
 	adapter->total_tx_bytes += total_tx_bytes;
 	adapter->total_tx_packets += total_tx_packets;
-	adapter->net_stats.tx_bytes += total_tx_bytes;
-	adapter->net_stats.tx_packets += total_tx_packets;
+	netdev->stats.tx_bytes += total_tx_bytes;
+	netdev->stats.tx_packets += total_tx_packets;
 	return (count < tx_ring->count);
 }
 
@@ -705,6 +702,7 @@
 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 				  int *work_done, int work_to_do)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
@@ -748,8 +746,8 @@
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			e_dbg("%s: Packet Split buffers didn't pick up the "
-			      "full packet\n", netdev->name);
+			e_dbg("Packet Split buffers didn't pick up the full "
+			      "packet\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -762,8 +760,8 @@
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			e_dbg("%s: Last part of the packet spanning multiple "
-			      "descriptors\n", netdev->name);
+			e_dbg("Last part of the packet spanning multiple "
+			      "descriptors\n");
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -871,8 +869,8 @@
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -1051,8 +1049,8 @@
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -1199,7 +1197,7 @@
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl, icr = er32(ICR);
 
-	if (!icr)
+	if (!icr || test_bit(__E1000_DOWN, &adapter->state))
 		return IRQ_NONE;  /* Not our interrupt */
 
 	/*
@@ -1481,7 +1479,7 @@
 	else
 		memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &e1000_intr_msix_rx, 0, adapter->rx_ring->name,
+			  e1000_intr_msix_rx, 0, adapter->rx_ring->name,
 			  netdev);
 	if (err)
 		goto out;
@@ -1494,7 +1492,7 @@
 	else
 		memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &e1000_intr_msix_tx, 0, adapter->tx_ring->name,
+			  e1000_intr_msix_tx, 0, adapter->tx_ring->name,
 			  netdev);
 	if (err)
 		goto out;
@@ -1503,7 +1501,7 @@
 	vector++;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &e1000_msix_other, 0, netdev->name, netdev);
+			  e1000_msix_other, 0, netdev->name, netdev);
 	if (err)
 		goto out;
 
@@ -1534,7 +1532,7 @@
 		e1000e_set_interrupt_capability(adapter);
 	}
 	if (adapter->flags & FLAG_MSI_ENABLED) {
-		err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0,
+		err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
 				  netdev->name, netdev);
 		if (!err)
 			return err;
@@ -1544,7 +1542,7 @@
 		adapter->int_mode = E1000E_INT_MODE_LEGACY;
 	}
 
-	err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED,
+	err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
 			  netdev->name, netdev);
 	if (err)
 		e_err("Unable to allocate interrupt, Error: %d\n", err);
@@ -2040,11 +2038,14 @@
 	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
 	    (vid == adapter->mng_vlan_id))
 		return;
+
 	/* add VID to filter table */
-	index = (vid >> 5) & 0x7F;
-	vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
-	vfta |= (1 << (vid & 0x1F));
-	e1000e_write_vfta(hw, index, vfta);
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		index = (vid >> 5) & 0x7F;
+		vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+		vfta |= (1 << (vid & 0x1F));
+		hw->mac.ops.write_vfta(hw, index, vfta);
+	}
 }
 
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -2069,10 +2070,12 @@
 	}
 
 	/* remove VID from filter table */
-	index = (vid >> 5) & 0x7F;
-	vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
-	vfta &= ~(1 << (vid & 0x1F));
-	e1000e_write_vfta(hw, index, vfta);
+	if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+		index = (vid >> 5) & 0x7F;
+		vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+		vfta &= ~(1 << (vid & 0x1F));
+		hw->mac.ops.write_vfta(hw, index, vfta);
+	}
 }
 
 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
@@ -2464,8 +2467,6 @@
 		ew32(ITR, 1000000000 / (adapter->itr * 256));
 
 	ctrl_ext = er32(CTRL_EXT);
-	/* Reset delay timers after every interrupt */
-	ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
 	/* Auto-Mask interrupts upon ICR access */
 	ctrl_ext |= E1000_CTRL_EXT_IAME;
 	ew32(IAM, 0xffffffff);
@@ -2507,21 +2508,23 @@
 	 * packet size is equal or larger than the specified value (in 8 byte
 	 * units), e.g. using jumbo frames when setting to E1000_ERT_2048
 	 */
-	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN)) {
-		u32 rxdctl = er32(RXDCTL(0));
-		ew32(RXDCTL(0), rxdctl | 0x3);
-		ew32(ERT, E1000_ERT_2048 | (1 << 13));
-		/*
-		 * With jumbo frames and early-receive enabled, excessive
-		 * C4->C2 latencies result in dropped transactions.
-		 */
-		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-					  e1000e_driver_name, 55);
-	} else {
-		pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
-					  e1000e_driver_name,
-					  PM_QOS_DEFAULT_VALUE);
+	if (adapter->flags & FLAG_HAS_ERT) {
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			u32 rxdctl = er32(RXDCTL(0));
+			ew32(RXDCTL(0), rxdctl | 0x3);
+			ew32(ERT, E1000_ERT_2048 | (1 << 13));
+			/*
+			 * With jumbo frames and early-receive enabled,
+			 * excessive C-state transition latencies result in
+			 * dropped transactions.
+			 */
+			pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+						  adapter->netdev->name, 55);
+		} else {
+			pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
+						  adapter->netdev->name,
+						  PM_QOS_DEFAULT_VALUE);
+		}
 	}
 
 	/* Enable Receives */
@@ -2645,18 +2648,8 @@
  **/
 void e1000e_power_up_phy(struct e1000_adapter *adapter)
 {
-	u16 mii_reg = 0;
-
-	/* Just clear the power down bit to wake the phy back up */
-	if (adapter->hw.phy.media_type == e1000_media_type_copper) {
-		/*
-		 * According to the manual, the phy will retain its
-		 * settings across a power-down/up cycle
-		 */
-		e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg);
-		mii_reg &= ~MII_CR_POWER_DOWN;
-		e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg);
-	}
+	if (adapter->hw.phy.ops.power_up)
+		adapter->hw.phy.ops.power_up(&adapter->hw);
 
 	adapter->hw.mac.ops.setup_link(&adapter->hw);
 }
@@ -2664,35 +2657,17 @@
 /**
  * e1000_power_down_phy - Power down the PHY
  *
- * Power down the PHY so no link is implied when interface is down
- * The PHY cannot be powered down is management or WoL is active
+ * Power down the PHY so no link is implied when interface is down.
+ * The PHY cannot be powered down if management or WoL is active.
  */
 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
-	u16 mii_reg;
-
 	/* WoL is enabled */
 	if (adapter->wol)
 		return;
 
-	/* non-copper PHY? */
-	if (adapter->hw.phy.media_type != e1000_media_type_copper)
-		return;
-
-	/* reset is blocked because of a SoL/IDER session */
-	if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw))
-		return;
-
-	/* manageability (AMT) is enabled */
-	if (er32(MANC) & E1000_MANC_SMBUS_EN)
-		return;
-
-	/* power down the PHY */
-	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
-	mii_reg |= MII_CR_POWER_DOWN;
-	e1e_wphy(hw, PHY_CONTROL, mii_reg);
-	mdelay(1);
+	if (adapter->hw.phy.ops.power_down)
+		adapter->hw.phy.ops.power_down(&adapter->hw);
 }
 
 /**
@@ -2769,25 +2744,38 @@
 	/*
 	 * flow control settings
 	 *
-	 * The high water mark must be low enough to fit two full frame
+	 * The high water mark must be low enough to fit one full frame
 	 * (or the size used for early receive) above it in the Rx FIFO.
 	 * Set it to the lower of:
 	 * - 90% of the Rx FIFO size, and
 	 * - the full Rx FIFO size minus the early receive size (for parts
 	 *   with ERT support assuming ERT set to E1000_ERT_2048), or
-	 * - the full Rx FIFO size minus two full frames
+	 * - the full Rx FIFO size minus one full frame
 	 */
-	if ((adapter->flags & FLAG_HAS_ERT) &&
-	    (adapter->netdev->mtu > ETH_DATA_LEN))
-		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - (E1000_ERT_2048 << 3)));
-	else
-		hwm = min(((pba << 10) * 9 / 10),
-			  ((pba << 10) - (2 * adapter->max_frame_size)));
+	if (hw->mac.type == e1000_pchlan) {
+		/*
+		 * Workaround PCH LOM adapter hangs with certain network
+		 * loads.  If hangs persist, try disabling Tx flow control.
+		 */
+		if (adapter->netdev->mtu > ETH_DATA_LEN) {
+			fc->high_water = 0x3500;
+			fc->low_water  = 0x1500;
+		} else {
+			fc->high_water = 0x5000;
+			fc->low_water  = 0x3000;
+		}
+	} else {
+		if ((adapter->flags & FLAG_HAS_ERT) &&
+		    (adapter->netdev->mtu > ETH_DATA_LEN))
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - (E1000_ERT_2048 << 3)));
+		else
+			hwm = min(((pba << 10) * 9 / 10),
+				  ((pba << 10) - adapter->max_frame_size));
 
-	fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
-	fc->low_water = (fc->high_water - (2 * adapter->max_frame_size));
-	fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */
+		fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+		fc->low_water = fc->high_water - 8;
+	}
 
 	if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
 		fc->pause_time = 0xFFFF;
@@ -2813,6 +2801,10 @@
 	if (mac->ops.init_hw(hw))
 		e_err("Hardware Error\n");
 
+	/* additional part of the flow-control workaround above */
+	if (hw->mac.type == e1000_pchlan)
+		ew32(FCRTV_PCH, 0x1000);
+
 	e1000_update_mng_vlan(adapter);
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
@@ -2839,6 +2831,12 @@
 {
 	struct e1000_hw *hw = &adapter->hw;
 
+	/* DMA latency requirement to workaround early-receive/jumbo issue */
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY,
+		                       adapter->netdev->name,
+				       PM_QOS_DEFAULT_VALUE);
+
 	/* hardware has been reset, we need to reload some things */
 	e1000_configure(adapter);
 
@@ -2899,6 +2897,10 @@
 	e1000_clean_tx_ring(adapter);
 	e1000_clean_rx_ring(adapter);
 
+	if (adapter->flags & FLAG_HAS_ERT)
+		pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY,
+		                          adapter->netdev->name);
+
 	/*
 	 * TODO: for power management, we could drop the link and
 	 * pci_disable_device here.
@@ -2956,7 +2958,7 @@
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = er32(ICR);
 
-	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	e_dbg("icr is %08X\n", icr);
 	if (icr & E1000_ICR_RXSEQ) {
 		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
 		wmb();
@@ -2993,7 +2995,7 @@
 	if (err)
 		goto msi_test_failed;
 
-	err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+	err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
 			  netdev->name, netdev);
 	if (err) {
 		pci_disable_msi(adapter->pdev);
@@ -3026,7 +3028,7 @@
 		goto msi_test_failed;
 
 	/* okay so the test worked, restore settings */
-	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+	e_dbg("MSI interrupt test succeeded!\n");
 msi_test_failed:
 	e1000e_set_interrupt_capability(adapter);
 	e1000_request_irq(adapter);
@@ -3287,6 +3289,7 @@
  **/
 void e1000e_update_stats(struct e1000_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	u16 phy_data;
@@ -3381,8 +3384,8 @@
 	adapter->stats.tsctfc += er32(TSCTFC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
@@ -3390,22 +3393,22 @@
 	 * RLEC on some newer hardware can be incorrect so build
 	 * our own version based on RUC and ROC
 	 */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
-	adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+	netdev->stats.rx_length_errors = adapter->stats.ruc +
 					      adapter->stats.roc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
-	adapter->net_stats.tx_errors = adapter->stats.ecol +
+	netdev->stats.tx_errors = adapter->stats.ecol +
 				       adapter->stats.latecol;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
 
 	/* Tx Dropped needs to be maintained elsewhere */
 
@@ -3610,7 +3613,7 @@
 			case SPEED_100:
 				txb2b = 0;
 				netdev->tx_queue_len = 100;
-				/* maybe add some timeout factor ? */
+				adapter->tx_timeout_factor = 10;
 				break;
 			}
 
@@ -3759,68 +3762,64 @@
 	u8 ipcss, ipcso, tucss, tucso, hdr_len;
 	int err;
 
-	if (skb_is_gso(skb)) {
-		if (skb_header_cloned(skb)) {
-			err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-			if (err)
-				return err;
-		}
+	if (!skb_is_gso(skb))
+		return 0;
 
-		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
-		mss = skb_shinfo(skb)->gso_size;
-		if (skb->protocol == htons(ETH_P_IP)) {
-			struct iphdr *iph = ip_hdr(skb);
-			iph->tot_len = 0;
-			iph->check = 0;
-			tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
-								 iph->daddr, 0,
-								 IPPROTO_TCP,
-								 0);
-			cmd_length = E1000_TXD_CMD_IP;
-			ipcse = skb_transport_offset(skb) - 1;
-		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
-			ipv6_hdr(skb)->payload_len = 0;
-			tcp_hdr(skb)->check =
-				~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
-						 &ipv6_hdr(skb)->daddr,
-						 0, IPPROTO_TCP, 0);
-			ipcse = 0;
-		}
-		ipcss = skb_network_offset(skb);
-		ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
-		tucss = skb_transport_offset(skb);
-		tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
-		tucse = 0;
-
-		cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
-			       E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
-
-		i = tx_ring->next_to_use;
-		context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-		buffer_info = &tx_ring->buffer_info[i];
-
-		context_desc->lower_setup.ip_fields.ipcss  = ipcss;
-		context_desc->lower_setup.ip_fields.ipcso  = ipcso;
-		context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
-		context_desc->upper_setup.tcp_fields.tucss = tucss;
-		context_desc->upper_setup.tcp_fields.tucso = tucso;
-		context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
-		context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
-		context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
-		context_desc->cmd_and_length = cpu_to_le32(cmd_length);
-
-		buffer_info->time_stamp = jiffies;
-		buffer_info->next_to_watch = i;
-
-		i++;
-		if (i == tx_ring->count)
-			i = 0;
-		tx_ring->next_to_use = i;
-
-		return 1;
+	if (skb_header_cloned(skb)) {
+		err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		if (err)
+			return err;
 	}
 
-	return 0;
+	hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+	mss = skb_shinfo(skb)->gso_size;
+	if (skb->protocol == htons(ETH_P_IP)) {
+		struct iphdr *iph = ip_hdr(skb);
+		iph->tot_len = 0;
+		iph->check = 0;
+		tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+		                                         0, IPPROTO_TCP, 0);
+		cmd_length = E1000_TXD_CMD_IP;
+		ipcse = skb_transport_offset(skb) - 1;
+	} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+		ipv6_hdr(skb)->payload_len = 0;
+		tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+		                                       &ipv6_hdr(skb)->daddr,
+		                                       0, IPPROTO_TCP, 0);
+		ipcse = 0;
+	}
+	ipcss = skb_network_offset(skb);
+	ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+	tucss = skb_transport_offset(skb);
+	tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+	tucse = 0;
+
+	cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+	               E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+	i = tx_ring->next_to_use;
+	context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+	buffer_info = &tx_ring->buffer_info[i];
+
+	context_desc->lower_setup.ip_fields.ipcss  = ipcss;
+	context_desc->lower_setup.ip_fields.ipcso  = ipcso;
+	context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
+	context_desc->upper_setup.tcp_fields.tucss = tucss;
+	context_desc->upper_setup.tcp_fields.tucso = tucso;
+	context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+	context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
+	context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+	context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+	buffer_info->time_stamp = jiffies;
+	buffer_info->next_to_watch = i;
+
+	i++;
+	if (i == tx_ring->count)
+		i = 0;
+	tx_ring->next_to_use = i;
+
+	return 1;
 }
 
 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
@@ -3892,23 +3891,14 @@
 			unsigned int mss)
 {
 	struct e1000_ring *tx_ring = adapter->tx_ring;
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_buffer *buffer_info;
 	unsigned int len = skb_headlen(skb);
-	unsigned int offset, size, count = 0, i;
+	unsigned int offset = 0, size, count = 0, i;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		adapter->tx_dma_failed++;
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-	offset = 0;
-
 	while (len) {
 		buffer_info = &tx_ring->buffer_info[i];
 		size = min(len, max_per_txd);
@@ -3916,11 +3906,15 @@
 		buffer_info->length = size;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
-		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
-		count++;
+		buffer_info->dma = pci_map_single(pdev,	skb->data + offset,
+						  size,	PCI_DMA_TODEVICE);
+		buffer_info->mapped_as_page = false;
+		if (pci_dma_mapping_error(pdev, buffer_info->dma))
+			goto dma_error;
 
 		len -= size;
 		offset += size;
+		count++;
 
 		if (len) {
 			i++;
@@ -3934,7 +3928,7 @@
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = 0;
+		offset = frag->page_offset;
 
 		while (len) {
 			i++;
@@ -3947,7 +3941,12 @@
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
 			buffer_info->next_to_watch = i;
-			buffer_info->dma = map[f] + offset;
+			buffer_info->dma = pci_map_page(pdev, frag->page,
+							offset, size,
+							PCI_DMA_TODEVICE);
+			buffer_info->mapped_as_page = true;
+			if (pci_dma_mapping_error(pdev, buffer_info->dma))
+				goto dma_error;
 
 			len -= size;
 			offset += size;
@@ -3959,6 +3958,22 @@
 	tx_ring->buffer_info[first].next_to_watch = i;
 
 	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+	buffer_info->dma = 0;
+	count--;
+
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		buffer_info = &tx_ring->buffer_info[i];
+		e1000_put_txbuf(adapter, buffer_info);;
+	}
+
+	return 0;
 }
 
 static void e1000_tx_queue(struct e1000_adapter *adapter,
@@ -4031,8 +4046,8 @@
 	u16 length, offset;
 
 	if (vlan_tx_tag_present(skb)) {
-		if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
-		    && (adapter->hw.mng_cookie.status &
+		if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+		    (adapter->hw.mng_cookie.status &
 			E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
 			return 0;
 	}
@@ -4254,10 +4269,8 @@
  **/
 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -4288,8 +4301,10 @@
 
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		msleep(1);
-	/* e1000e_down has a dependency on max_frame_size */
+	/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
 	adapter->max_frame_size = max_frame;
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+	netdev->mtu = new_mtu;
 	if (netif_running(netdev))
 		e1000e_down(adapter);
 
@@ -4319,9 +4334,6 @@
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
-	netdev->mtu = new_mtu;
-
 	if (netif_running(netdev))
 		e1000e_up(adapter);
 	else
@@ -4346,6 +4358,8 @@
 		data->phy_id = adapter->hw.phy.addr;
 		break;
 	case SIOCGMIIREG:
+		e1000_phy_read_status(adapter);
+
 		switch (data->reg_num & 0x1F) {
 		case MII_BMCR:
 			data->val_out = adapter->phy_regs.bmcr;
@@ -4453,7 +4467,7 @@
 	e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
 
 	/* activate PHY wakeup */
-	retval = hw->phy.ops.acquire_phy(hw);
+	retval = hw->phy.ops.acquire(hw);
 	if (retval) {
 		e_err("Could not acquire PHY\n");
 		return retval;
@@ -4470,7 +4484,7 @@
 	if (retval)
 		e_err("Could not set PHY Host Wakeup bit\n");
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return retval;
 }
@@ -5144,6 +5158,7 @@
 	INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
 	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
 	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
+	INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
 
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
@@ -5267,19 +5282,24 @@
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
 
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->watchdog_task);
+	cancel_work_sync(&adapter->downshift_task);
+	cancel_work_sync(&adapter->update_phy_task);
+	cancel_work_sync(&adapter->print_hang_task);
 	flush_scheduled_work();
 
+	if (!(netdev->flags & IFF_UP))
+		e1000_power_down_phy(adapter);
+
+	unregister_netdev(netdev);
+
 	/*
 	 * Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
 	e1000_release_hw_control(adapter);
 
-	unregister_netdev(netdev);
-
-	if (!e1000_check_reset_block(&adapter->hw))
-		e1000_phy_hw_reset(&adapter->hw);
-
 	e1000e_reset_interrupt_capability(adapter);
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
@@ -5345,6 +5365,7 @@
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
 
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
@@ -5398,12 +5419,10 @@
 	int ret;
 	printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
 	       e1000e_driver_name, e1000e_driver_version);
-	printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
+	printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n",
 	       e1000e_driver_name);
 	ret = pci_register_driver(&e1000_driver);
-	pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
-			       PM_QOS_DEFAULT_VALUE);
-				
+
 	return ret;
 }
 module_init(e1000_init_module);
@@ -5417,7 +5436,6 @@
 static void __exit e1000_exit_module(void)
 {
 	pci_unregister_driver(&e1000_driver);
-	pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name);
 }
 module_exit(e1000_exit_module);
 
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 1342e0b1..2e39977 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 03175b3..55a2c0a 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2008 Intel Corporation.
+  Copyright(c) 1999 - 2009 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -44,6 +44,8 @@
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
 	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+		ARRAY_SIZE(e1000_m88_cable_length_table)
 
 static const u16 e1000_igp_2_cable_length_table[] =
 	{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
@@ -71,7 +73,6 @@
 #define I82577_CFG_ASSERT_CRS_ON_TX       (1 << 15)
 #define I82577_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
 #define I82577_CTRL_REG                   23
-#define I82577_CTRL_DOWNSHIFT_MASK        (7 << 10)
 
 /* 82577 specific PHY registers */
 #define I82577_PHY_CTRL_2            18
@@ -131,7 +132,7 @@
 	u16 phy_id;
 	u16 retry_count = 0;
 
-	if (!(phy->ops.read_phy_reg))
+	if (!(phy->ops.read_reg))
 		goto out;
 
 	while (retry_count < 2) {
@@ -152,29 +153,29 @@
 			goto out;
 
 		/*
-		 * If the PHY ID is still unknown, we may have an 82577i
-		 * without link.  We will try again after setting Slow
-		 * MDIC mode. No harm in trying again in this case since
-		 * the PHY ID is unknown at this point anyway
+		 * If the PHY ID is still unknown, we may have an 82577
+		 * without link.  We will try again after setting Slow MDIC
+		 * mode. No harm in trying again in this case since the PHY
+		 * ID is unknown at this point anyway.
 		 */
-		ret_val = phy->ops.acquire_phy(hw);
+		ret_val = phy->ops.acquire(hw);
 		if (ret_val)
 			goto out;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
 		if (ret_val)
 			goto out;
-		phy->ops.release_phy(hw);
+		phy->ops.release(hw);
 
 		retry_count++;
 	}
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if (retry_count) {
-		ret_val = phy->ops.acquire_phy(hw);
+		ret_val = phy->ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
-		phy->ops.release_phy(hw);
+		phy->ops.release(hw);
 	}
 
 	return ret_val;
@@ -212,7 +213,7 @@
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -239,11 +240,11 @@
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Read did not complete\n");
+		e_dbg("MDI Read did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 	*data = (u16) mdic;
@@ -265,7 +266,7 @@
 	u32 i, mdic = 0;
 
 	if (offset > MAX_PHY_REG_ADDRESS) {
-		hw_dbg(hw, "PHY Address %d is out of range\n", offset);
+		e_dbg("PHY Address %d is out of range\n", offset);
 		return -E1000_ERR_PARAM;
 	}
 
@@ -293,11 +294,11 @@
 			break;
 	}
 	if (!(mdic & E1000_MDIC_READY)) {
-		hw_dbg(hw, "MDI Write did not complete\n");
+		e_dbg("MDI Write did not complete\n");
 		return -E1000_ERR_PHY;
 	}
 	if (mdic & E1000_MDIC_ERROR) {
-		hw_dbg(hw, "MDI Error\n");
+		e_dbg("MDI Error\n");
 		return -E1000_ERR_PHY;
 	}
 
@@ -318,14 +319,14 @@
 {
 	s32 ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					   data);
 
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -343,14 +344,14 @@
 {
 	s32 ret_val;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					    data);
 
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -372,10 +373,10 @@
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -393,7 +394,7 @@
 
 release:
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 out:
 	return ret_val;
 }
@@ -443,10 +444,10 @@
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -464,7 +465,7 @@
 
 release:
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -516,10 +517,10 @@
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -534,7 +535,7 @@
 	*data = (u16)kmrnctrlsta;
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -588,10 +589,10 @@
 	s32 ret_val = 0;
 
 	if (!locked) {
-		if (!(hw->phy.ops.acquire_phy))
+		if (!(hw->phy.ops.acquire))
 			goto out;
 
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			goto out;
 	}
@@ -603,7 +604,7 @@
 	udelay(2);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 out:
 	return ret_val;
@@ -650,7 +651,7 @@
 	u16 phy_data;
 
 	/* Enable CRS on TX. This must be set for half-duplex operation. */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -659,16 +660,7 @@
 	/* Enable downshift */
 	phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
 
-	ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data);
-	if (ret_val)
-		goto out;
-
-	/* Set number of link attempts before downshift */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data);
-	if (ret_val)
-		goto out;
-	phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK;
-	ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data);
+	ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data);
 
 out:
 	return ret_val;
@@ -786,12 +778,12 @@
 	/* Commit the changes. */
 	ret_val = e1000e_commit_phy(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error committing the PHY changes\n");
+		e_dbg("Error committing the PHY changes\n");
 		return ret_val;
 	}
 
 	if (phy->type == e1000_phy_82578) {
-		ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
 		                            &phy_data);
 		if (ret_val)
 			return ret_val;
@@ -799,7 +791,7 @@
 		/* 82578 PHY - set the downshift count to 1x. */
 		phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
 		phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
-		ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+		ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
 		                             phy_data);
 		if (ret_val)
 			return ret_val;
@@ -823,7 +815,7 @@
 
 	ret_val = e1000_phy_hw_reset(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error resetting the PHY.\n");
+		e_dbg("Error resetting the PHY.\n");
 		return ret_val;
 	}
 
@@ -834,9 +826,9 @@
 	msleep(100);
 
 	/* disable lplu d0 during driver init */
-	ret_val = e1000_set_d0_lplu_state(hw, 0);
+	ret_val = e1000_set_d0_lplu_state(hw, false);
 	if (ret_val) {
-		hw_dbg(hw, "Error Disabling LPLU D0\n");
+		e_dbg("Error Disabling LPLU D0\n");
 		return ret_val;
 	}
 	/* Configure mdi-mdix settings */
@@ -972,39 +964,39 @@
 				 NWAY_AR_10T_HD_CAPS);
 	mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
 
-	hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised);
+	e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
 
 	/* Do we want to advertise 10 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
-		hw_dbg(hw, "Advertise 10mb Half duplex\n");
+		e_dbg("Advertise 10mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
 	}
 
 	/* Do we want to advertise 10 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
-		hw_dbg(hw, "Advertise 10mb Full duplex\n");
+		e_dbg("Advertise 10mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Half Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
-		hw_dbg(hw, "Advertise 100mb Half duplex\n");
+		e_dbg("Advertise 100mb Half duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
 	}
 
 	/* Do we want to advertise 100 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
-		hw_dbg(hw, "Advertise 100mb Full duplex\n");
+		e_dbg("Advertise 100mb Full duplex\n");
 		mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
 	}
 
 	/* We do not allow the Phy to advertise 1000 Mb Half Duplex */
 	if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
-		hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n");
+		e_dbg("Advertise 1000mb Half duplex request denied!\n");
 
 	/* Do we want to advertise 1000 Mb Full Duplex? */
 	if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
-		hw_dbg(hw, "Advertise 1000mb Full duplex\n");
+		e_dbg("Advertise 1000mb Full duplex\n");
 		mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
 	}
 
@@ -1063,7 +1055,7 @@
 		mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
 		break;
 	default:
-		hw_dbg(hw, "Flow control param set incorrectly\n");
+		e_dbg("Flow control param set incorrectly\n");
 		ret_val = -E1000_ERR_CONFIG;
 		return ret_val;
 	}
@@ -1072,7 +1064,7 @@
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
 	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
 		ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
@@ -1109,13 +1101,13 @@
 	if (phy->autoneg_advertised == 0)
 		phy->autoneg_advertised = phy->autoneg_mask;
 
-	hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n");
+	e_dbg("Reconfiguring auto-neg advertisement params\n");
 	ret_val = e1000_phy_setup_autoneg(hw);
 	if (ret_val) {
-		hw_dbg(hw, "Error Setting up Auto-Negotiation\n");
+		e_dbg("Error Setting up Auto-Negotiation\n");
 		return ret_val;
 	}
-	hw_dbg(hw, "Restarting Auto-Neg\n");
+	e_dbg("Restarting Auto-Neg\n");
 
 	/*
 	 * Restart auto-negotiation by setting the Auto Neg Enable bit and
@@ -1137,7 +1129,7 @@
 	if (phy->autoneg_wait_to_complete) {
 		ret_val = e1000_wait_autoneg(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error while waiting for "
+			e_dbg("Error while waiting for "
 				 "autoneg to complete\n");
 			return ret_val;
 		}
@@ -1175,10 +1167,10 @@
 		 * PHY will be set to 10H, 10F, 100H or 100F
 		 * depending on user settings.
 		 */
-		hw_dbg(hw, "Forcing Speed and Duplex\n");
+		e_dbg("Forcing Speed and Duplex\n");
 		ret_val = e1000_phy_force_speed_duplex(hw);
 		if (ret_val) {
-			hw_dbg(hw, "Error Forcing Speed and Duplex\n");
+			e_dbg("Error Forcing Speed and Duplex\n");
 			return ret_val;
 		}
 	}
@@ -1195,11 +1187,11 @@
 		return ret_val;
 
 	if (link) {
-		hw_dbg(hw, "Valid link established!!!\n");
+		e_dbg("Valid link established!!!\n");
 		e1000e_config_collision_dist(hw);
 		ret_val = e1000e_config_fc_after_link_up(hw);
 	} else {
-		hw_dbg(hw, "Unable to establish link!!!\n");
+		e_dbg("Unable to establish link!!!\n");
 	}
 
 	return ret_val;
@@ -1245,12 +1237,12 @@
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "IGP PSCR: %X\n", phy_data);
+	e_dbg("IGP PSCR: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 						     PHY_FORCE_LIMIT,
@@ -1260,7 +1252,7 @@
 			return ret_val;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -1304,7 +1296,7 @@
 	if (ret_val)
 		return ret_val;
 
-	hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data);
+	e_dbg("M88E1000 PSCR: %X\n", phy_data);
 
 	ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
@@ -1322,7 +1314,7 @@
 		return ret_val;
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");
+		e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
 						     100000, &link);
@@ -1330,17 +1322,22 @@
 			return ret_val;
 
 		if (!link) {
-			/*
-			 * We didn't get link.
-			 * Reset the DSP and cross our fingers.
-			 */
-			ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
-					   0x001d);
-			if (ret_val)
-				return ret_val;
-			ret_val = e1000e_phy_reset_dsp(hw);
-			if (ret_val)
-				return ret_val;
+			if (hw->phy.type != e1000_phy_m88) {
+				e_dbg("Link taking longer than expected.\n");
+			} else {
+				/*
+				 * We didn't get link.
+				 * Reset the DSP and cross our fingers.
+				 */
+				ret_val = e1e_wphy(hw,
+						M88E1000_PHY_PAGE_SELECT,
+						0x001d);
+				if (ret_val)
+					return ret_val;
+				ret_val = e1000e_phy_reset_dsp(hw);
+				if (ret_val)
+					return ret_val;
+			}
 		}
 
 		/* Try once more */
@@ -1350,6 +1347,9 @@
 			return ret_val;
 	}
 
+	if (hw->phy.type != e1000_phy_m88)
+		return 0;
+
 	ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
 	if (ret_val)
 		return ret_val;
@@ -1379,6 +1379,73 @@
 }
 
 /**
+ *  e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ *  @hw: pointer to the HW structure
+ *
+ *  Forces the speed and duplex settings of the PHY.
+ *  This is a function pointer entry point only called by
+ *  PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	e1000e_phy_force_speed_duplex_setup(hw, &data);
+
+	ret_val = e1e_wphy(hw, PHY_CONTROL, data);
+	if (ret_val)
+		goto out;
+
+	/* Disable MDI-X support for 10/100 */
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	data &= ~IFE_PMC_AUTO_MDIX;
+	data &= ~IFE_PMC_FORCE_MDIX;
+
+	ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
+	if (ret_val)
+		goto out;
+
+	e_dbg("IFE PMC: %X\n", data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
+
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			e_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = e1000e_phy_has_link_generic(hw,
+		                                     PHY_FORCE_LIMIT,
+		                                     100000,
+		                                     &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
  *  @hw: pointer to the HW structure
  *  @phy_ctrl: pointer to current value of PHY_CONTROL
@@ -1413,11 +1480,11 @@
 	if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
 		ctrl &= ~E1000_CTRL_FD;
 		*phy_ctrl &= ~MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Half Duplex\n");
+		e_dbg("Half Duplex\n");
 	} else {
 		ctrl |= E1000_CTRL_FD;
 		*phy_ctrl |= MII_CR_FULL_DUPLEX;
-		hw_dbg(hw, "Full Duplex\n");
+		e_dbg("Full Duplex\n");
 	}
 
 	/* Forcing 10mb or 100mb? */
@@ -1425,12 +1492,12 @@
 		ctrl |= E1000_CTRL_SPD_100;
 		*phy_ctrl |= MII_CR_SPEED_100;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
-		hw_dbg(hw, "Forcing 100mb\n");
+		e_dbg("Forcing 100mb\n");
 	} else {
 		ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
 		*phy_ctrl |= MII_CR_SPEED_10;
 		*phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
-		hw_dbg(hw, "Forcing 10mb\n");
+		e_dbg("Forcing 10mb\n");
 	}
 
 	e1000e_config_collision_dist(hw);
@@ -1533,8 +1600,8 @@
 	switch (phy->type) {
 	case e1000_phy_m88:
 	case e1000_phy_gg82563:
+	case e1000_phy_bm:
 	case e1000_phy_82578:
-	case e1000_phy_82577:
 		offset	= M88E1000_PHY_SPEC_STATUS;
 		mask	= M88E1000_PSSR_DOWNSHIFT;
 		break;
@@ -1545,7 +1612,7 @@
 		break;
 	default:
 		/* speed downshift not supported */
-		phy->speed_downgraded = 0;
+		phy->speed_downgraded = false;
 		return 0;
 	}
 
@@ -1565,7 +1632,7 @@
  *
  *  Polarity is determined based on the PHY specific status register.
  **/
-static s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -1590,7 +1657,7 @@
  *  Polarity is determined based on the PHY port status register, and the
  *  current speed (since there is no polarity at 100Mbps).
  **/
-static s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -1628,6 +1695,39 @@
 }
 
 /**
+ *  e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, offset, mask;
+
+	/*
+	 * Polarity is determined based on the reversal feature being enabled.
+	 */
+	if (phy->polarity_correction) {
+		offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+		mask = IFE_PESC_POLARITY_REVERSED;
+	} else {
+		offset = IFE_PHY_SPECIAL_CONTROL;
+		mask = IFE_PSC_FORCE_POLARITY;
+	}
+
+	ret_val = e1e_rphy(hw, offset, &phy_data);
+
+	if (!ret_val)
+		phy->cable_polarity = (phy_data & mask)
+		                       ? e1000_rev_polarity_reversed
+		                       : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
  *  e1000_wait_autoneg - Wait for auto-neg completion
  *  @hw: pointer to the HW structure
  *
@@ -1727,15 +1827,21 @@
 
 	ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
 	if (ret_val)
-		return ret_val;
+		goto out;
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
-		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	        M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
-	phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
+out:
 	return ret_val;
 }
 
@@ -1746,7 +1852,7 @@
  *  The automatic gain control (agc) normalizes the amplitude of the
  *  received signal, adjusting for the attenuation produced by the
  *  cable.  By reading the AGC registers, which represent the
- *  combination of course and fine gain value, the value can be put
+ *  combination of coarse and fine gain value, the value can be put
  *  into a lookup table to obtain the approximate cable length
  *  for each channel.
  **/
@@ -1771,7 +1877,7 @@
 
 		/*
 		 * Getting bits 15:9, which represent the combination of
-		 * course and fine gain values.  The result is a number
+		 * coarse and fine gain values.  The result is a number
 		 * that can be put into the lookup table to obtain the
 		 * approximate cable length.
 		 */
@@ -1825,8 +1931,8 @@
 	u16 phy_data;
 	bool link;
 
-	if (hw->phy.media_type != e1000_media_type_copper) {
-		hw_dbg(hw, "Phy info is only valid for copper media\n");
+	if (phy->media_type != e1000_media_type_copper) {
+		e_dbg("Phy info is only valid for copper media\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1835,7 +1941,7 @@
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
@@ -1903,11 +2009,11 @@
 		return ret_val;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		return -E1000_ERR_CONFIG;
 	}
 
-	phy->polarity_correction = 1;
+	phy->polarity_correction = true;
 
 	ret_val = e1000_check_polarity_igp(hw);
 	if (ret_val)
@@ -1946,6 +2052,61 @@
 }
 
 /**
+ *  e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ *  @hw: pointer to the HW structure
+ *
+ *  Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		e_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+	if (ret_val)
+		goto out;
+	phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
+	                           ? false : true;
+
+	if (phy->polarity_correction) {
+		ret_val = e1000_check_polarity_ife(hw);
+		if (ret_val)
+			goto out;
+	} else {
+		/* Polarity is forced */
+		phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+	}
+
+	ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+
+	/* The following parameters are undefined for 10/100 operation. */
+	phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+	phy->local_rx = e1000_1000t_rx_status_undefined;
+	phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000e_phy_sw_reset - PHY software reset
  *  @hw: pointer to the HW structure
  *
@@ -1990,7 +2151,7 @@
 	if (ret_val)
 		return 0;
 
-	ret_val = phy->ops.acquire_phy(hw);
+	ret_val = phy->ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2005,7 +2166,7 @@
 
 	udelay(150);
 
-	phy->ops.release_phy(hw);
+	phy->ops.release(hw);
 
 	return e1000_get_phy_cfg_done(hw);
 }
@@ -2031,7 +2192,7 @@
  **/
 s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
 {
-	hw_dbg(hw, "Running IGP 3 PHY init script\n");
+	e_dbg("Running IGP 3 PHY init script\n");
 
 	/* PHY init IGP 3 */
 	/* Enable rise/fall, 10-mode work in class-A */
@@ -2199,28 +2360,34 @@
 s32 e1000e_determine_phy_address(struct e1000_hw *hw)
 {
 	s32 ret_val = -E1000_ERR_PHY_TYPE;
-	u32 phy_addr= 0;
-	u32 i = 0;
+	u32 phy_addr = 0;
+	u32 i;
 	enum e1000_phy_type phy_type = e1000_phy_unknown;
 
-	do {
-		for (phy_addr = 0; phy_addr < 4; phy_addr++) {
-			hw->phy.addr = phy_addr;
+	hw->phy.id = phy_type;
+
+	for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+		hw->phy.addr = phy_addr;
+		i = 0;
+
+		do {
 			e1000e_get_phy_id(hw);
 			phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
 
-			/* 
+			/*
 			 * If phy_type is valid, break - we found our
 			 * PHY address
 			 */
 			if (phy_type  != e1000_phy_unknown) {
 				ret_val = 0;
-				break;
+				goto out;
 			}
-		}
-		i++;
-	} while ((ret_val != 0) && (i < 100));
+			msleep(1);
+			i++;
+		} while (i < 10);
+	}
 
+out:
 	return ret_val;
 }
 
@@ -2256,7 +2423,7 @@
 	u32 page = offset >> IGP_PAGE_SHIFT;
 	u32 page_shift = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2294,7 +2461,7 @@
 	                                    data);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2315,7 +2482,7 @@
 	u32 page = offset >> IGP_PAGE_SHIFT;
 	u32 page_shift = 0;
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2352,7 +2519,7 @@
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 	                                   data);
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2371,7 +2538,7 @@
 	s32 ret_val;
 	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2397,7 +2564,7 @@
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
 					   data);
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2415,7 +2582,7 @@
 	s32 ret_val;
 	u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
 
-	ret_val = hw->phy.ops.acquire_phy(hw);
+	ret_val = hw->phy.ops.acquire(hw);
 	if (ret_val)
 		return ret_val;
 
@@ -2441,7 +2608,7 @@
 					    data);
 
 out:
-	hw->phy.ops.release_phy(hw);
+	hw->phy.ops.release(hw);
 	return ret_val;
 }
 
@@ -2474,7 +2641,7 @@
 	/* Gig must be disabled for MDIO accesses to page 800 */
 	if ((hw->mac.type == e1000_pchlan) &&
 	   (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
-		hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
+		e_dbg("Attempting to access page 800 while gig enabled.\n");
 
 	/* All operations in this function are phy address 1 */
 	hw->phy.addr = 1;
@@ -2484,20 +2651,26 @@
 	                          (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT));
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not read PHY page 769\n");
 		goto out;
+	}
 
 	/* First clear bit 4 to avoid a power state change */
 	phy_reg &= ~(BM_WUC_HOST_WU_BIT);
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not clear PHY page 769 bit 4\n");
 		goto out;
+	}
 
 	/* Write bit 2 = 1, and clear bit 4 to 769_17 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG,
 	                                    phy_reg | BM_WUC_ENABLE_BIT);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not write PHY page 769 bit 2\n");
 		goto out;
+	}
 
 	/* Select page 800 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
@@ -2505,21 +2678,25 @@
 
 	/* Write the page 800 offset value using opcode 0x11 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not write address opcode to page 800\n");
 		goto out;
+	}
 
 	if (read) {
 	        /* Read the page 800 value using opcode 0x12 */
 		ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 		                                   data);
 	} else {
-	        /* Read the page 800 value using opcode 0x12 */
+	        /* Write the page 800 value using opcode 0x12 */
 		ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
 						    *data);
 	}
 
-	if (ret_val)
+	if (ret_val) {
+		e_dbg("Could not access data value from page 800\n");
 		goto out;
+	}
 
 	/*
 	 * Restore 769_17.2 to its original value
@@ -2530,12 +2707,53 @@
 
 	/* Clear 769_17.2 */
 	ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+	if (ret_val) {
+		e_dbg("Could not clear PHY page 769 bit 2\n");
+		goto out;
+	}
 
 out:
 	return ret_val;
 }
 
 /**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+	mii_reg &= ~MII_CR_POWER_DOWN;
+	e1e_wphy(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+	u16 mii_reg = 0;
+
+	/* The PHY will retain its settings across a power down/up cycle */
+	e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+	mii_reg |= MII_CR_POWER_DOWN;
+	e1e_wphy(hw, PHY_CONTROL, mii_reg);
+	msleep(1);
+}
+
+/**
  *  e1000e_commit_phy - Soft PHY reset
  *  @hw: pointer to the HW structure
  *
@@ -2544,8 +2762,8 @@
  **/
 s32 e1000e_commit_phy(struct e1000_hw *hw)
 {
-	if (hw->phy.ops.commit_phy)
-		return hw->phy.ops.commit_phy(hw);
+	if (hw->phy.ops.commit)
+		return hw->phy.ops.commit(hw);
 
 	return 0;
 }
@@ -2624,7 +2842,7 @@
 	bool in_slow_mode = false;
 
 	if (!locked) {
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2658,19 +2876,18 @@
 		page = 0;
 
 	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		if ((hw->phy.type != e1000_phy_82578) ||
-		    ((reg != I82578_ADDR_REG) &&
-		     (reg != I82578_ADDR_REG + 1))) {
-			u32 phy_addr = hw->phy.addr;
+		u32 phy_addr = hw->phy.addr;
 
-			hw->phy.addr = 1;
+		hw->phy.addr = 1;
 
-			/* Page is shifted left, PHY expects (page x 32) */
-			ret_val = e1000e_write_phy_reg_mdic(hw,
-			                             IGP01E1000_PHY_PAGE_SELECT,
-			                             (page << IGP_PAGE_SHIFT));
-			hw->phy.addr = phy_addr;
-		}
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+					     IGP01E1000_PHY_PAGE_SELECT,
+					     (page << IGP_PAGE_SHIFT));
+		hw->phy.addr = phy_addr;
+
+		if (ret_val)
+			goto out;
 	}
 
 	ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2678,10 +2895,10 @@
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -2734,7 +2951,7 @@
 	bool in_slow_mode = false;
 
 	if (!locked) {
-		ret_val = hw->phy.ops.acquire_phy(hw);
+		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return ret_val;
 	}
@@ -2784,19 +3001,18 @@
 	}
 
 	if (reg > MAX_PHY_MULTI_PAGE_REG) {
-		if ((hw->phy.type != e1000_phy_82578) ||
-		    ((reg != I82578_ADDR_REG) &&
-		     (reg != I82578_ADDR_REG + 1))) {
-			u32 phy_addr = hw->phy.addr;
+		u32 phy_addr = hw->phy.addr;
 
-			hw->phy.addr = 1;
+		hw->phy.addr = 1;
 
-			/* Page is shifted left, PHY expects (page x 32) */
-			ret_val = e1000e_write_phy_reg_mdic(hw,
-			                             IGP01E1000_PHY_PAGE_SELECT,
-			                             (page << IGP_PAGE_SHIFT));
-			hw->phy.addr = phy_addr;
-		}
+		/* Page is shifted left, PHY expects (page x 32) */
+		ret_val = e1000e_write_phy_reg_mdic(hw,
+					     IGP01E1000_PHY_PAGE_SELECT,
+					     (page << IGP_PAGE_SHIFT));
+		hw->phy.addr = phy_addr;
+
+		if (ret_val)
+			goto out;
 	}
 
 	ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
@@ -2805,10 +3021,10 @@
 out:
 	/* Revert to MDIO fast mode, if applicable */
 	if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
-		ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+		ret_val |= e1000_set_mdio_slow_mode_hv(hw, false);
 
 	if (!locked)
-		hw->phy.ops.release_phy(hw);
+		hw->phy.ops.release(hw);
 
 	return ret_val;
 }
@@ -2884,7 +3100,7 @@
 	/* masking with 0x3F to remove the page from offset */
 	ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
 	if (ret_val) {
-		hw_dbg(hw, "Could not write PHY the HV address register\n");
+		e_dbg("Could not write PHY the HV address register\n");
 		goto out;
 	}
 
@@ -2895,7 +3111,7 @@
 		ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
 
 	if (ret_val) {
-		hw_dbg(hw, "Could not read data value from HV data register\n");
+		e_dbg("Could not read data value from HV data register\n");
 		goto out;
 	}
 
@@ -2923,12 +3139,12 @@
 		goto out;
 
 	/* Do not apply workaround if in PHY loopback bit 14 set */
-	hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data);
+	hw->phy.ops.read_reg(hw, PHY_CONTROL, &data);
 	if (data & PHY_CONTROL_LB)
 		goto out;
 
 	/* check if link is up and at 1Gbps */
-	ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data);
+	ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data);
 	if (ret_val)
 		goto out;
 
@@ -2944,13 +3160,13 @@
 	mdelay(200);
 
 	/* flush the packets in the fifo buffer */
-	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
 	                                HV_MUX_DATA_CTRL_GEN_TO_MAC |
 	                                HV_MUX_DATA_CTRL_FORCE_SPEED);
 	if (ret_val)
 		goto out;
 
-	ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL,
+	ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL,
 	                                HV_MUX_DATA_CTRL_GEN_TO_MAC);
 
 out:
@@ -2971,7 +3187,7 @@
 	s32 ret_val;
 	u16 data;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
 
 	if (!ret_val)
 		phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
@@ -2996,13 +3212,13 @@
 	u16 phy_data;
 	bool link;
 
-	ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data);
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
 	if (ret_val)
 		goto out;
 
 	e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data);
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
@@ -3010,23 +3226,23 @@
 	 * Clear Auto-Crossover to force MDI manually.  82577 requires MDI
 	 * forced whenever speed and duplex are forced.
 	 */
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data);
 	if (ret_val)
 		goto out;
 
 	phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX;
 	phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX;
 
-	ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data);
+	ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data);
 	if (ret_val)
 		goto out;
 
-	hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data);
+	e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data);
 
 	udelay(1);
 
 	if (phy->autoneg_wait_to_complete) {
-		hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n");
+		e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
 
 		ret_val = e1000e_phy_has_link_generic(hw,
 		                                     PHY_FORCE_LIMIT,
@@ -3036,7 +3252,7 @@
 			goto out;
 
 		if (!link)
-			hw_dbg(hw, "Link taking longer than expected.\n");
+			e_dbg("Link taking longer than expected.\n");
 
 		/* Try once more */
 		ret_val = e1000e_phy_has_link_generic(hw,
@@ -3072,7 +3288,7 @@
 		goto out;
 
 	if (!link) {
-		hw_dbg(hw, "Phy info is only valid if link is up\n");
+		e_dbg("Phy info is only valid if link is up\n");
 		ret_val = -E1000_ERR_CONFIG;
 		goto out;
 	}
@@ -3083,7 +3299,7 @@
 	if (ret_val)
 		goto out;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data);
 	if (ret_val)
 		goto out;
 
@@ -3095,7 +3311,7 @@
 		if (ret_val)
 			goto out;
 
-		ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data);
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
 		if (ret_val)
 			goto out;
 
@@ -3129,7 +3345,7 @@
 	s32 ret_val;
 	u16 phy_data, length;
 
-	ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+	ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data);
 	if (ret_val)
 		goto out;
 
@@ -3137,7 +3353,7 @@
 	         I82577_DSTATUS_CABLE_LENGTH_SHIFT;
 
 	if (length == E1000_CABLE_LENGTH_UNDEFINED)
-		ret_val = E1000_ERR_PHY;
+		ret_val = -E1000_ERR_PHY;
 
 	phy->cable_length = length;
 
diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c
index d2f6ee1..ca93c9a9 100644
--- a/drivers/net/e2100.c
+++ b/drivers/net/e2100.c
@@ -186,9 +186,9 @@
 		return -EBUSY;
 
 	/* First check the station address for the Ctron prefix. */
-	if (inb(ioaddr + E21_SAPROM + 0) != 0x00
-		|| inb(ioaddr + E21_SAPROM + 1) != 0x00
-		|| inb(ioaddr + E21_SAPROM + 2) != 0x1d) {
+	if (inb(ioaddr + E21_SAPROM + 0) != 0x00 ||
+	    inb(ioaddr + E21_SAPROM + 1) != 0x00 ||
+	    inb(ioaddr + E21_SAPROM + 2) != 0x1d) {
 		retval = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 1e93416..94c5949 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -990,7 +990,7 @@
 		return -EAGAIN;
 	}
 
-	if (request_irq(dev->irq , &eepro_interrupt, 0, dev->name, dev)) {
+	if (request_irq(dev->irq , eepro_interrupt, 0, dev->name, dev)) {
 		printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 592de8f..6fbfc8e 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -457,7 +457,7 @@
 	if (!dev->irq || !irqrmap[dev->irq])
 		return -ENXIO;
 
-	ret = request_irq(dev->irq, &eexp_irq, 0, dev->name, dev);
+	ret = request_irq(dev->irq, eexp_irq, 0, dev->name, dev);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 41bd7ae..7b62336 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -189,8 +189,8 @@
 		for (k = 0; k < EHEA_MAX_PORTS; k++) {
 			struct ehea_port *port = adapter->port[k];
 
-			if (!port || (port->state != EHEA_PORT_UP)
-				|| (num_ports == 0))
+			if (!port || (port->state != EHEA_PORT_UP) ||
+			    (num_ports == 0))
 				continue;
 
 			for (l = 0;
@@ -447,7 +447,9 @@
 	max_index_mask = q_skba->len - 1;
 	for (i = 0; i < fill_wqes; i++) {
 		u64 tmp_addr;
-		struct sk_buff *skb = netdev_alloc_skb(dev, packet_size);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev, packet_size);
 		if (!skb) {
 			q_skba->os_skbs = fill_wqes - i;
 			if (q_skba->os_skbs == q_skba->len - 2) {
@@ -457,7 +459,6 @@
 			}
 			break;
 		}
-		skb_reserve(skb, NET_IP_ALIGN);
 
 		skb_arr[index] = skb;
 		tmp_addr = ehea_map_vaddr(skb->data);
@@ -500,7 +501,7 @@
 {
 	return ehea_refill_rq_def(pr, &pr->rq2_skba, 2,
 				  nr_of_wqes, EHEA_RWQE2_TYPE,
-				  EHEA_RQ2_PKT_SIZE + NET_IP_ALIGN);
+				  EHEA_RQ2_PKT_SIZE);
 }
 
 
@@ -508,7 +509,7 @@
 {
 	return ehea_refill_rq_def(pr, &pr->rq3_skba, 3,
 				  nr_of_wqes, EHEA_RWQE3_TYPE,
-				  EHEA_MAX_PACKET_SIZE + NET_IP_ALIGN);
+				  EHEA_MAX_PACKET_SIZE);
 }
 
 static inline int ehea_check_cqe(struct ehea_cqe *cqe, int *rq_num)
@@ -656,8 +657,8 @@
 static void ehea_proc_skb(struct ehea_port_res *pr, struct ehea_cqe *cqe,
 			  struct sk_buff *skb)
 {
-	int vlan_extracted = (cqe->status & EHEA_CQE_VLAN_TAG_XTRACT)
-		&& pr->port->vgrp;
+	int vlan_extracted = ((cqe->status & EHEA_CQE_VLAN_TAG_XTRACT) &&
+			      pr->port->vgrp);
 
 	if (use_lro) {
 		if (vlan_extracted)
@@ -1388,8 +1389,8 @@
 
 int ehea_rem_smrs(struct ehea_port_res *pr)
 {
-	if ((ehea_rem_mr(&pr->send_mr))
-	    || (ehea_rem_mr(&pr->recv_mr)))
+	if ((ehea_rem_mr(&pr->send_mr)) ||
+	    (ehea_rem_mr(&pr->recv_mr)))
 		return -EIO;
 	else
 		return 0;
@@ -2030,8 +2031,8 @@
 		write_ip_start_end(swqe, skb);
 
 		if (iph->protocol == IPPROTO_UDP) {
-			if ((iph->frag_off & IP_MF)
-			    || (iph->frag_off & IP_OFFSET))
+			if ((iph->frag_off & IP_MF) ||
+			    (iph->frag_off & IP_OFFSET))
 				/* IP fragment, so don't change cs */
 				swqe->tx_control &= ~EHEA_SWQE_TCP_CHECKSUM;
 			else
@@ -2076,8 +2077,8 @@
 			write_tcp_offset_end(swqe, skb);
 
 		} else if (iph->protocol == IPPROTO_UDP) {
-			if ((iph->frag_off & IP_MF)
-			    || (iph->frag_off & IP_OFFSET))
+			if ((iph->frag_off & IP_MF) ||
+			    (iph->frag_off & IP_OFFSET))
 				/* IP fragment, so don't change cs */
 				swqe->tx_control |= EHEA_SWQE_CRC
 						 | EHEA_SWQE_IMM_DATA_PRESENT;
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index bc7c5b7..18d405f 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -837,8 +837,8 @@
 		hret = ehea_h_register_rpage_mr(adapter->handle, mr->handle, 0,
 						0, pt_abs, EHEA_MAX_RPAGE);
 
-		if ((hret != H_SUCCESS)
-		    && (hret != H_PAGE_REGISTERED)) {
+		if ((hret != H_SUCCESS) &&
+		    (hret != H_PAGE_REGISTERED)) {
 			ehea_h_free_resource(adapter->handle, mr->handle,
 					     FORCE_FREE);
 			ehea_error("register_rpage_mr failed");
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index d69d52e..f875751 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -870,19 +870,6 @@
 	dev_kfree_skb_any(buf->os_buf);
 }
 
-static inline struct sk_buff *enic_rq_alloc_skb(struct net_device *netdev,
-	unsigned int size)
-{
-	struct sk_buff *skb;
-
-	skb = netdev_alloc_skb(netdev, size + NET_IP_ALIGN);
-
-	if (skb)
-		skb_reserve(skb, NET_IP_ALIGN);
-
-	return skb;
-}
-
 static int enic_rq_alloc_buf(struct vnic_rq *rq)
 {
 	struct enic *enic = vnic_dev_priv(rq->vdev);
@@ -892,7 +879,7 @@
 	unsigned int os_buf_index = 0;
 	dma_addr_t dma_addr;
 
-	skb = enic_rq_alloc_skb(netdev, len);
+	skb = netdev_alloc_skb_ip_align(netdev, len);
 	if (!skb)
 		return -ENOMEM;
 
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index 641a10d..41494f7 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -630,8 +630,8 @@
 		barrier();
 		if ((inl(ioaddr + MIICtrl) & MII_READOP) == 0) {
 			/* Work around read failure bug. */
-			if (phy_id == 1 && location < 6
-				&& inw(ioaddr + MIIData) == 0xffff) {
+			if (phy_id == 1 && location < 6 &&
+			    inw(ioaddr + MIIData) == 0xffff) {
 				outl(read_cmd, ioaddr + MIICtrl);
 				continue;
 			}
@@ -668,7 +668,7 @@
 	outl(0x4001, ioaddr + GENCTL);
 
 	napi_enable(&ep->napi);
-	if ((retval = request_irq(dev->irq, &epic_interrupt, IRQF_SHARED, dev->name, dev))) {
+	if ((retval = request_irq(dev->irq, epic_interrupt, IRQF_SHARED, dev->name, dev))) {
 		napi_disable(&ep->napi);
 		return retval;
 	}
@@ -1205,8 +1205,8 @@
 			}
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak
-				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 				pci_dma_sync_single_for_cpu(ep->pci_dev,
 							    ep->rx_ring[entry].bufaddr,
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index f7d9ac8..bd1db92 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -406,10 +406,10 @@
 
 		if (ethoc_update_rx_stats(priv, &bd) == 0) {
 			int size = bd.stat >> 16;
-			struct sk_buff *skb = netdev_alloc_skb(dev, size);
+			struct sk_buff *skb;
 
 			size -= 4; /* strip the CRC */
-			skb_reserve(skb, 2); /* align TCP/IP header */
+			skb = netdev_alloc_skb_ip_align(dev, size);
 
 			if (likely(skb)) {
 				void *src = phys_to_virt(bd.addr);
@@ -641,7 +641,7 @@
 		return -ENXIO;
 	}
 
-	phy = phy_connect(dev, dev_name(&phy->dev), &ethoc_mdio_poll, 0,
+	phy = phy_connect(dev, dev_name(&phy->dev), ethoc_mdio_poll, 0,
 			PHY_INTERFACE_MODE_GMII);
 	if (IS_ERR(phy)) {
 		dev_err(&dev->dev, "could not attach to PHY\n");
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 18d5fbb..dac4e59 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -839,7 +839,7 @@
 
 	iowrite32(0x00000001, ioaddr + BCR);	/* Reset */
 
-	if (request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev))
+	if (request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev))
 		return -EAGAIN;
 
 	for (i = 0; i < 3; i++)
@@ -1629,8 +1629,8 @@
 		if (debug)
 			printk(KERN_DEBUG "  netdev_rx() status was %8.8x.\n", rx_status);
 
-		if ((!((rx_status & RXFSD) && (rx_status & RXLSD)))
-		    || (rx_status & ErrorSummary)) {
+		if ((!((rx_status & RXFSD) && (rx_status & RXLSD))) ||
+		    (rx_status & ErrorSummary)) {
 			if (rx_status & ErrorSummary) {	/* there was a fatal error */
 				if (debug)
 					printk(KERN_DEBUG
@@ -1655,8 +1655,8 @@
 					cur = np->cur_rx;
 					while (desno <= np->really_rx_count) {
 						++desno;
-						if ((!(cur->status & RXOWN))
-						    && (cur->status & RXLSD))
+						if ((!(cur->status & RXOWN)) &&
+						    (cur->status & RXLSD))
 							break;
 						/* goto next rx descriptor */
 						cur = cur->next_desc_logical;
@@ -1786,8 +1786,8 @@
 	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = CR_W_PROM | CR_W_AB | CR_W_AM;
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = CR_W_AB | CR_W_AM;
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 66dace6..6407672 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -226,17 +226,17 @@
 		phy_start(priv->phydev);
 	}
 
-	if (request_irq(dev->irq, &mpc52xx_fec_interrupt, IRQF_SHARED,
+	if (request_irq(dev->irq, mpc52xx_fec_interrupt, IRQF_SHARED,
 	                DRIVER_NAME "_ctrl", dev)) {
 		dev_err(&dev->dev, "ctrl interrupt request failed\n");
 		goto free_phy;
 	}
-	if (request_irq(priv->r_irq, &mpc52xx_fec_rx_interrupt, 0,
+	if (request_irq(priv->r_irq, mpc52xx_fec_rx_interrupt, 0,
 	                DRIVER_NAME "_rx", dev)) {
 		dev_err(&dev->dev, "rx interrupt request failed\n");
 		goto free_ctrl_irq;
 	}
-	if (request_irq(priv->t_irq, &mpc52xx_fec_tx_interrupt, 0,
+	if (request_irq(priv->t_irq, mpc52xx_fec_tx_interrupt, 0,
 	                DRIVER_NAME "_tx", dev)) {
 		dev_err(&dev->dev, "tx interrupt request failed\n");
 		goto free_2irqs;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 3116601..3c34048 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -4004,7 +4004,7 @@
 				/* Request irq for rx handling */
 				sprintf(np->name_rx, "%s-rx", dev->name);
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector,
-						&nv_nic_irq_rx, IRQF_SHARED, np->name_rx, dev) != 0) {
+						nv_nic_irq_rx, IRQF_SHARED, np->name_rx, dev) != 0) {
 					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
@@ -4013,7 +4013,7 @@
 				/* Request irq for tx handling */
 				sprintf(np->name_tx, "%s-tx", dev->name);
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector,
-						&nv_nic_irq_tx, IRQF_SHARED, np->name_tx, dev) != 0) {
+						nv_nic_irq_tx, IRQF_SHARED, np->name_tx, dev) != 0) {
 					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
@@ -4022,7 +4022,7 @@
 				/* Request irq for link and timer handling */
 				sprintf(np->name_other, "%s-other", dev->name);
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector,
-						&nv_nic_irq_other, IRQF_SHARED, np->name_other, dev) != 0) {
+						nv_nic_irq_other, IRQF_SHARED, np->name_other, dev) != 0) {
 					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index efbf676..25fabb3 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -3,8 +3,9 @@
  * Provides Bus interface for MIIM regs
  *
  * Author: Andy Fleming <afleming@freescale.com>
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
  *
  * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
  *
@@ -102,13 +103,18 @@
 	return value;
 }
 
+static struct fsl_pq_mdio __iomem *fsl_pq_mdio_get_regs(struct mii_bus *bus)
+{
+	return (void __iomem __force *)bus->priv;
+}
+
 /*
  * Write value to the PHY at mii_id at register regnum,
  * on the bus, waiting until the write is done before returning.
  */
 int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
 {
-	struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+	struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
 
 	/* Write to the local MII regs */
 	return(fsl_pq_local_mdio_write(regs, mii_id, regnum, value));
@@ -120,7 +126,7 @@
  */
 int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 {
-	struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+	struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
 
 	/* Read the local MII regs */
 	return(fsl_pq_local_mdio_read(regs, mii_id, regnum));
@@ -129,7 +135,7 @@
 /* Reset the MIIM registers, and wait for the bus to free */
 static int fsl_pq_mdio_reset(struct mii_bus *bus)
 {
-	struct fsl_pq_mdio __iomem *regs = (void __iomem *)bus->priv;
+	struct fsl_pq_mdio __iomem *regs = fsl_pq_mdio_get_regs(bus);
 	int timeout = PHY_INIT_TIMEOUT;
 
 	mutex_lock(&bus->mdio_lock);
@@ -189,19 +195,29 @@
 
 
 #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
-static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
+static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
 {
 	struct gfar __iomem *enet_regs;
+	u32 __iomem *ioremap_tbipa;
+	u64 addr, size;
 
 	/*
 	 * This is mildly evil, but so is our hardware for doing this.
 	 * Also, we have to cast back to struct gfar because of
 	 * definition weirdness done in gianfar.h.
 	 */
-	enet_regs = (struct gfar __iomem *)
-		((char __iomem *)regs - offsetof(struct gfar, gfar_mii_regs));
-
-	return &enet_regs->tbipa;
+	if(of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+		of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+		of_device_is_compatible(np, "gianfar")) {
+		enet_regs = (struct gfar __iomem *)regs;
+		return &enet_regs->tbipa;
+	} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi")) {
+		addr = of_translate_address(np, of_get_address(np, 1, &size, NULL));
+		ioremap_tbipa = ioremap(addr, size);
+		return ioremap_tbipa;
+	} else
+		return NULL;
 }
 #endif
 
@@ -250,11 +266,12 @@
 {
 	struct device_node *np = ofdev->node;
 	struct device_node *tbi;
-	struct fsl_pq_mdio __iomem *regs;
+	struct fsl_pq_mdio __iomem *regs = NULL;
+	void __iomem *map;
 	u32 __iomem *tbipa;
 	struct mii_bus *new_bus;
 	int tbiaddr = -1;
-	u64 addr, size;
+	u64 addr = 0, size = 0;
 	int err = 0;
 
 	new_bus = mdiobus_alloc();
@@ -269,13 +286,19 @@
 
 	/* Set the PHY base address */
 	addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
-	regs = ioremap(addr, size);
-
-	if (NULL == regs) {
+	map = ioremap(addr, size);
+	if (!map) {
 		err = -ENOMEM;
 		goto err_free_bus;
 	}
 
+	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+			of_device_is_compatible(np, "fsl,ucc-mdio") ||
+			of_device_is_compatible(np, "ucc_geth_phy"))
+		map -= offsetof(struct fsl_pq_mdio, miimcfg);
+	regs = map;
+
 	new_bus->priv = (void __force *)regs;
 
 	new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
@@ -290,9 +313,15 @@
 
 	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
 			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+			of_device_is_compatible(np, "fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi") ||
 			of_device_is_compatible(np, "gianfar")) {
 #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
-		tbipa = get_gfar_tbipa(regs);
+		tbipa = get_gfar_tbipa(regs, np);
+		if (!tbipa) {
+			err = -EINVAL;
+			goto err_free_irqs;
+		}
 #else
 		err = -ENODEV;
 		goto err_free_irqs;
@@ -380,7 +409,7 @@
 
 	dev_set_drvdata(device, NULL);
 
-	iounmap((void __iomem *)bus->priv);
+	iounmap(fsl_pq_mdio_get_regs(bus));
 	bus->priv = NULL;
 	mdiobus_free(bus);
 
@@ -405,6 +434,12 @@
 	{
 		.compatible = "fsl,gianfar-mdio",
 	},
+	{
+		.compatible = "fsl,etsec2-tbi",
+	},
+	{
+		.compatible = "fsl,etsec2-mdio",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
diff --git a/drivers/net/fsl_pq_mdio.h b/drivers/net/fsl_pq_mdio.h
index 36dad52..1f7d865 100644
--- a/drivers/net/fsl_pq_mdio.h
+++ b/drivers/net/fsl_pq_mdio.h
@@ -3,8 +3,9 @@
  * Driver for the MDIO bus controller on Freescale PowerQUICC processors
  *
  * Author: Andy Fleming
+ * Modifier: Sandeep Gopalpet
  *
- * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -23,6 +24,12 @@
 #define MII_READ_COMMAND       0x00000001
 
 struct fsl_pq_mdio {
+	u8 res1[16];
+	u32 ieventm;	/* MDIO Interrupt event register (for etsec2)*/
+	u32 imaskm;	/* MDIO Interrupt mask register (for etsec2)*/
+	u8 res2[4];
+	u32 emapm;	/* MDIO Event mapping register (for etsec2)*/
+	u8 res3[1280];
 	u32 miimcfg;		/* MII management configuration reg */
 	u32 miimcom;		/* MII management command reg */
 	u32 miimadd;		/* MII management address reg */
@@ -31,9 +38,9 @@
 	u32 miimind;		/* MII management indication reg */
 	u8 reserved[28];	/* Space holder */
 	u32 utbipar;		/* TBI phy address reg (only on UCC) */
+	u8 res4[2728];
 } __attribute__ ((packed));
 
-
 int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
 int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
 int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 5bf31f1..16def13 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -8,9 +8,10 @@
  *
  * Author: Andy Fleming
  * Maintainer: Kumar Gala
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
- * Copyright (c) 2007 MontaVista Software, Inc.
+ * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -109,7 +110,7 @@
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
 struct sk_buff *gfar_new_skb(struct net_device *dev);
-static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
+static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
 		struct sk_buff *skb);
 static int gfar_set_mac_address(struct net_device *dev);
 static int gfar_change_mtu(struct net_device *dev, int new_mtu);
@@ -130,8 +131,8 @@
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void gfar_netpoll(struct net_device *dev);
 #endif
-int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
-static int gfar_clean_tx_ring(struct net_device *dev);
+int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
+static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue);
 static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
 			      int amount_pull);
 static void gfar_vlan_rx_register(struct net_device *netdev,
@@ -142,11 +143,277 @@
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
 static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc");
 MODULE_DESCRIPTION("Gianfar Ethernet Driver");
 MODULE_LICENSE("GPL");
 
+static void gfar_init_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
+			    dma_addr_t buf)
+{
+	u32 lstatus;
+
+	bdp->bufPtr = buf;
+
+	lstatus = BD_LFLAG(RXBD_EMPTY | RXBD_INTERRUPT);
+	if (bdp == rx_queue->rx_bd_base + rx_queue->rx_ring_size - 1)
+		lstatus |= BD_LFLAG(RXBD_WRAP);
+
+	eieio();
+
+	bdp->lstatus = lstatus;
+}
+
+static int gfar_init_bds(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	struct txbd8 *txbdp;
+	struct rxbd8 *rxbdp;
+	int i, j;
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		/* Initialize some variables in our dev structure */
+		tx_queue->num_txbdfree = tx_queue->tx_ring_size;
+		tx_queue->dirty_tx = tx_queue->tx_bd_base;
+		tx_queue->cur_tx = tx_queue->tx_bd_base;
+		tx_queue->skb_curtx = 0;
+		tx_queue->skb_dirtytx = 0;
+
+		/* Initialize Transmit Descriptor Ring */
+		txbdp = tx_queue->tx_bd_base;
+		for (j = 0; j < tx_queue->tx_ring_size; j++) {
+			txbdp->lstatus = 0;
+			txbdp->bufPtr = 0;
+			txbdp++;
+		}
+
+		/* Set the last descriptor in the ring to indicate wrap */
+		txbdp--;
+		txbdp->status |= TXBD_WRAP;
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		rx_queue->cur_rx = rx_queue->rx_bd_base;
+		rx_queue->skb_currx = 0;
+		rxbdp = rx_queue->rx_bd_base;
+
+		for (j = 0; j < rx_queue->rx_ring_size; j++) {
+			struct sk_buff *skb = rx_queue->rx_skbuff[j];
+
+			if (skb) {
+				gfar_init_rxbdp(rx_queue, rxbdp,
+						rxbdp->bufPtr);
+			} else {
+				skb = gfar_new_skb(ndev);
+				if (!skb) {
+					pr_err("%s: Can't allocate RX buffers\n",
+							ndev->name);
+					goto err_rxalloc_fail;
+				}
+				rx_queue->rx_skbuff[j] = skb;
+
+				gfar_new_rxbdp(rx_queue, rxbdp, skb);
+			}
+
+			rxbdp++;
+		}
+
+	}
+
+	return 0;
+
+err_rxalloc_fail:
+	free_skb_resources(priv);
+	return -ENOMEM;
+}
+
+static int gfar_alloc_skb_resources(struct net_device *ndev)
+{
+	void *vaddr;
+	dma_addr_t addr;
+	int i, j, k;
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct device *dev = &priv->ofdev->dev;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+
+	priv->total_tx_ring_size = 0;
+	for (i = 0; i < priv->num_tx_queues; i++)
+		priv->total_tx_ring_size += priv->tx_queue[i]->tx_ring_size;
+
+	priv->total_rx_ring_size = 0;
+	for (i = 0; i < priv->num_rx_queues; i++)
+		priv->total_rx_ring_size += priv->rx_queue[i]->rx_ring_size;
+
+	/* Allocate memory for the buffer descriptors */
+	vaddr = dma_alloc_coherent(dev,
+			sizeof(struct txbd8) * priv->total_tx_ring_size +
+			sizeof(struct rxbd8) * priv->total_rx_ring_size,
+			&addr, GFP_KERNEL);
+	if (!vaddr) {
+		if (netif_msg_ifup(priv))
+			pr_err("%s: Could not allocate buffer descriptors!\n",
+			       ndev->name);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		tx_queue->tx_bd_base = (struct txbd8 *) vaddr;
+		tx_queue->tx_bd_dma_base = addr;
+		tx_queue->dev = ndev;
+		/* enet DMA only understands physical addresses */
+		addr    += sizeof(struct txbd8) *tx_queue->tx_ring_size;
+		vaddr   += sizeof(struct txbd8) *tx_queue->tx_ring_size;
+	}
+
+	/* Start the rx descriptor ring where the tx ring leaves off */
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		rx_queue->rx_bd_base = (struct rxbd8 *) vaddr;
+		rx_queue->rx_bd_dma_base = addr;
+		rx_queue->dev = ndev;
+		addr    += sizeof (struct rxbd8) * rx_queue->rx_ring_size;
+		vaddr   += sizeof (struct rxbd8) * rx_queue->rx_ring_size;
+	}
+
+	/* Setup the skbuff rings */
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		tx_queue->tx_skbuff = kmalloc(sizeof(*tx_queue->tx_skbuff) *
+				  tx_queue->tx_ring_size, GFP_KERNEL);
+		if (!tx_queue->tx_skbuff) {
+			if (netif_msg_ifup(priv))
+				pr_err("%s: Could not allocate tx_skbuff\n",
+						ndev->name);
+			goto cleanup;
+		}
+
+		for (k = 0; k < tx_queue->tx_ring_size; k++)
+			tx_queue->tx_skbuff[k] = NULL;
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		rx_queue->rx_skbuff = kmalloc(sizeof(*rx_queue->rx_skbuff) *
+				  rx_queue->rx_ring_size, GFP_KERNEL);
+
+		if (!rx_queue->rx_skbuff) {
+			if (netif_msg_ifup(priv))
+				pr_err("%s: Could not allocate rx_skbuff\n",
+				       ndev->name);
+			goto cleanup;
+		}
+
+		for (j = 0; j < rx_queue->rx_ring_size; j++)
+			rx_queue->rx_skbuff[j] = NULL;
+	}
+
+	if (gfar_init_bds(ndev))
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	free_skb_resources(priv);
+	return -ENOMEM;
+}
+
+static void gfar_init_tx_rx_base(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 __iomem *baddr;
+	int i;
+
+	baddr = &regs->tbase0;
+	for(i = 0; i < priv->num_tx_queues; i++) {
+		gfar_write(baddr, priv->tx_queue[i]->tx_bd_dma_base);
+		baddr	+= 2;
+	}
+
+	baddr = &regs->rbase0;
+	for(i = 0; i < priv->num_rx_queues; i++) {
+		gfar_write(baddr, priv->rx_queue[i]->rx_bd_dma_base);
+		baddr   += 2;
+	}
+}
+
+static void gfar_init_mac(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 rctrl = 0;
+	u32 tctrl = 0;
+	u32 attrs = 0;
+
+	/* write the tx/rx base registers */
+	gfar_init_tx_rx_base(priv);
+
+	/* Configure the coalescing support */
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
+
+	if (priv->rx_filer_enable)
+		rctrl |= RCTRL_FILREN;
+
+	if (priv->rx_csum_enable)
+		rctrl |= RCTRL_CHECKSUMMING;
+
+	if (priv->extended_hash) {
+		rctrl |= RCTRL_EXTHASH;
+
+		gfar_clear_exact_match(ndev);
+		rctrl |= RCTRL_EMEN;
+	}
+
+	if (priv->padding) {
+		rctrl &= ~RCTRL_PAL_MASK;
+		rctrl |= RCTRL_PADDING(priv->padding);
+	}
+
+	/* keep vlan related bits if it's enabled */
+	if (priv->vlgrp) {
+		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
+		tctrl |= TCTRL_VLINS;
+	}
+
+	/* Init rctrl based on our settings */
+	gfar_write(&regs->rctrl, rctrl);
+
+	if (ndev->features & NETIF_F_IP_CSUM)
+		tctrl |= TCTRL_INIT_CSUM;
+
+	tctrl |= TCTRL_TXSCHED_PRIO;
+
+	gfar_write(&regs->tctrl, tctrl);
+
+	/* Set the extraction length and index */
+	attrs = ATTRELI_EL(priv->rx_stash_size) |
+		ATTRELI_EI(priv->rx_stash_index);
+
+	gfar_write(&regs->attreli, attrs);
+
+	/* Start with defaults, and add stashing or locking
+	 * depending on the approprate variables */
+	attrs = ATTR_INIT_SETTINGS;
+
+	if (priv->bd_stash_en)
+		attrs |= ATTR_BDSTASH;
+
+	if (priv->rx_stash_size != 0)
+		attrs |= ATTR_BUFSTASH;
+
+	gfar_write(&regs->attr, attrs);
+
+	gfar_write(&regs->fifo_tx_thr, priv->fifo_threshold);
+	gfar_write(&regs->fifo_tx_starve, priv->fifo_starve);
+	gfar_write(&regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
+}
+
 static const struct net_device_ops gfar_netdev_ops = {
 	.ndo_open = gfar_enet_open,
 	.ndo_start_xmit = gfar_start_xmit,
@@ -155,6 +422,7 @@
 	.ndo_set_multicast_list = gfar_set_multi,
 	.ndo_tx_timeout = gfar_timeout,
 	.ndo_do_ioctl = gfar_ioctl,
+	.ndo_select_queue = gfar_select_queue,
 	.ndo_vlan_rx_register = gfar_vlan_rx_register,
 	.ndo_set_mac_address = eth_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
@@ -163,56 +431,252 @@
 #endif
 };
 
+unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
+
+void lock_rx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_rx_queues; i++)
+		spin_lock(&priv->rx_queue[i]->rxlock);
+}
+
+void lock_tx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
+		spin_lock(&priv->tx_queue[i]->txlock);
+}
+
+void unlock_rx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_rx_queues; i++)
+		spin_unlock(&priv->rx_queue[i]->rxlock);
+}
+
+void unlock_tx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
+		spin_unlock(&priv->tx_queue[i]->txlock);
+}
+
 /* Returns 1 if incoming frames use an FCB */
 static inline int gfar_uses_fcb(struct gfar_private *priv)
 {
 	return priv->vlgrp || priv->rx_csum_enable;
 }
 
-static int gfar_of_init(struct net_device *dev)
+u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	return skb_get_queue_mapping(skb);
+}
+static void free_tx_pointers(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
+		kfree(priv->tx_queue[i]);
+}
+
+static void free_rx_pointers(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_rx_queues; i++)
+		kfree(priv->rx_queue[i]);
+}
+
+static void unmap_group_regs(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < MAXGROUPS; i++)
+		if (priv->gfargrp[i].regs)
+			iounmap(priv->gfargrp[i].regs);
+}
+
+static void disable_napi(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_grps; i++)
+		napi_disable(&priv->gfargrp[i].napi);
+}
+
+static void enable_napi(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_grps; i++)
+		napi_enable(&priv->gfargrp[i].napi);
+}
+
+static int gfar_parse_group(struct device_node *np,
+		struct gfar_private *priv, const char *model)
+{
+	u32 *queue_mask;
+	u64 addr, size;
+
+	addr = of_translate_address(np,
+			of_get_address(np, 0, &size, NULL));
+	priv->gfargrp[priv->num_grps].regs = ioremap(addr, size);
+
+	if (!priv->gfargrp[priv->num_grps].regs)
+		return -ENOMEM;
+
+	priv->gfargrp[priv->num_grps].interruptTransmit =
+			irq_of_parse_and_map(np, 0);
+
+	/* If we aren't the FEC we have multiple interrupts */
+	if (model && strcasecmp(model, "FEC")) {
+		priv->gfargrp[priv->num_grps].interruptReceive =
+			irq_of_parse_and_map(np, 1);
+		priv->gfargrp[priv->num_grps].interruptError =
+			irq_of_parse_and_map(np,2);
+		if (priv->gfargrp[priv->num_grps].interruptTransmit < 0 ||
+			priv->gfargrp[priv->num_grps].interruptReceive < 0 ||
+			priv->gfargrp[priv->num_grps].interruptError < 0) {
+			return -EINVAL;
+		}
+	}
+
+	priv->gfargrp[priv->num_grps].grp_id = priv->num_grps;
+	priv->gfargrp[priv->num_grps].priv = priv;
+	spin_lock_init(&priv->gfargrp[priv->num_grps].grplock);
+	if(priv->mode == MQ_MG_MODE) {
+		queue_mask = (u32 *)of_get_property(np,
+					"fsl,rx-bit-map", NULL);
+		priv->gfargrp[priv->num_grps].rx_bit_map =
+			queue_mask ?  *queue_mask :(DEFAULT_MAPPING >> priv->num_grps);
+		queue_mask = (u32 *)of_get_property(np,
+					"fsl,tx-bit-map", NULL);
+		priv->gfargrp[priv->num_grps].tx_bit_map =
+			queue_mask ? *queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
+	} else {
+		priv->gfargrp[priv->num_grps].rx_bit_map = 0xFF;
+		priv->gfargrp[priv->num_grps].tx_bit_map = 0xFF;
+	}
+	priv->num_grps++;
+
+	return 0;
+}
+
+static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
 {
 	const char *model;
 	const char *ctype;
 	const void *mac_addr;
-	u64 addr, size;
-	int err = 0;
-	struct gfar_private *priv = netdev_priv(dev);
-	struct device_node *np = priv->node;
+	int err = 0, i;
+	struct net_device *dev = NULL;
+	struct gfar_private *priv = NULL;
+	struct device_node *np = ofdev->node;
+	struct device_node *child = NULL;
 	const u32 *stash;
 	const u32 *stash_len;
 	const u32 *stash_idx;
+	unsigned int num_tx_qs, num_rx_qs;
+	u32 *tx_queues, *rx_queues;
 
 	if (!np || !of_device_is_available(np))
 		return -ENODEV;
 
-	/* get a pointer to the register memory */
-	addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
-	priv->regs = ioremap(addr, size);
+	/* parse the num of tx and rx queues */
+	tx_queues = (u32 *)of_get_property(np, "fsl,num_tx_queues", NULL);
+	num_tx_qs = tx_queues ? *tx_queues : 1;
 
-	if (priv->regs == NULL)
+	if (num_tx_qs > MAX_TX_QS) {
+		printk(KERN_ERR "num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
+				num_tx_qs, MAX_TX_QS);
+		printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
+		return -EINVAL;
+	}
+
+	rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
+	num_rx_qs = rx_queues ? *rx_queues : 1;
+
+	if (num_rx_qs > MAX_RX_QS) {
+		printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
+				num_tx_qs, MAX_TX_QS);
+		printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
+		return -EINVAL;
+	}
+
+	*pdev = alloc_etherdev_mq(sizeof(*priv), num_tx_qs);
+	dev = *pdev;
+	if (NULL == dev)
 		return -ENOMEM;
 
-	priv->interruptTransmit = irq_of_parse_and_map(np, 0);
+	priv = netdev_priv(dev);
+	priv->node = ofdev->node;
+	priv->ndev = dev;
+
+	dev->num_tx_queues = num_tx_qs;
+	dev->real_num_tx_queues = num_tx_qs;
+	priv->num_tx_queues = num_tx_qs;
+	priv->num_rx_queues = num_rx_qs;
+	priv->num_grps = 0x0;
 
 	model = of_get_property(np, "model", NULL);
 
-	/* If we aren't the FEC we have multiple interrupts */
-	if (model && strcasecmp(model, "FEC")) {
-		priv->interruptReceive = irq_of_parse_and_map(np, 1);
+	for (i = 0; i < MAXGROUPS; i++)
+		priv->gfargrp[i].regs = NULL;
 
-		priv->interruptError = irq_of_parse_and_map(np, 2);
-
-		if (priv->interruptTransmit < 0 ||
-				priv->interruptReceive < 0 ||
-				priv->interruptError < 0) {
-			err = -EINVAL;
-			goto err_out;
+	/* Parse and initialize group specific information */
+	if (of_device_is_compatible(np, "fsl,etsec2")) {
+		priv->mode = MQ_MG_MODE;
+		for_each_child_of_node(np, child) {
+			err = gfar_parse_group(child, priv, model);
+			if (err)
+				goto err_grp_init;
 		}
+	} else {
+		priv->mode = SQ_SG_MODE;
+		err = gfar_parse_group(np, priv, model);
+		if(err)
+			goto err_grp_init;
 	}
 
+	for (i = 0; i < priv->num_tx_queues; i++)
+	       priv->tx_queue[i] = NULL;
+	for (i = 0; i < priv->num_rx_queues; i++)
+		priv->rx_queue[i] = NULL;
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i] =  (struct gfar_priv_tx_q *)kmalloc(
+				sizeof (struct gfar_priv_tx_q), GFP_KERNEL);
+		if (!priv->tx_queue[i]) {
+			err = -ENOMEM;
+			goto tx_alloc_failed;
+		}
+		priv->tx_queue[i]->tx_skbuff = NULL;
+		priv->tx_queue[i]->qindex = i;
+		priv->tx_queue[i]->dev = dev;
+		spin_lock_init(&(priv->tx_queue[i]->txlock));
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i] = (struct gfar_priv_rx_q *)kmalloc(
+					sizeof (struct gfar_priv_rx_q), GFP_KERNEL);
+		if (!priv->rx_queue[i]) {
+			err = -ENOMEM;
+			goto rx_alloc_failed;
+		}
+		priv->rx_queue[i]->rx_skbuff = NULL;
+		priv->rx_queue[i]->qindex = i;
+		priv->rx_queue[i]->dev = dev;
+		spin_lock_init(&(priv->rx_queue[i]->rxlock));
+	}
+
+
 	stash = of_get_property(np, "bd-stash", NULL);
 
-	if(stash) {
+	if (stash) {
 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_BD_STASHING;
 		priv->bd_stash_en = 1;
 	}
@@ -270,8 +734,13 @@
 
 	return 0;
 
-err_out:
-	iounmap(priv->regs);
+rx_alloc_failed:
+	free_rx_pointers(priv);
+tx_alloc_failed:
+	free_tx_pointers(priv);
+err_grp_init:
+	unmap_group_regs(priv);
+	free_netdev(dev);
 	return err;
 }
 
@@ -289,6 +758,85 @@
 	return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
 }
 
+static unsigned int reverse_bitmap(unsigned int bit_map, unsigned int max_qs)
+{
+	unsigned int new_bit_map = 0x0;
+	int mask = 0x1 << (max_qs - 1), i;
+	for (i = 0; i < max_qs; i++) {
+		if (bit_map & mask)
+			new_bit_map = new_bit_map + (1 << i);
+		mask = mask >> 0x1;
+	}
+	return new_bit_map;
+}
+
+static u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar,
+				   u32 class)
+{
+	u32 rqfpr = FPR_FILER_MASK;
+	u32 rqfcr = 0x0;
+
+	rqfar--;
+	rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
+	ftp_rqfpr[rqfar] = rqfpr;
+	ftp_rqfcr[rqfar] = rqfcr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar--;
+	rqfcr = RQFCR_CMP_NOMATCH;
+	ftp_rqfpr[rqfar] = rqfpr;
+	ftp_rqfcr[rqfar] = rqfcr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar--;
+	rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND;
+	rqfpr = class;
+	ftp_rqfcr[rqfar] = rqfcr;
+	ftp_rqfpr[rqfar] = rqfpr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar--;
+	rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND;
+	rqfpr = class;
+	ftp_rqfcr[rqfar] = rqfcr;
+	ftp_rqfpr[rqfar] = rqfpr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	return rqfar;
+}
+
+static void gfar_init_filer_table(struct gfar_private *priv)
+{
+	int i = 0x0;
+	u32 rqfar = MAX_FILER_IDX;
+	u32 rqfcr = 0x0;
+	u32 rqfpr = FPR_FILER_MASK;
+
+	/* Default rule */
+	rqfcr = RQFCR_CMP_MATCH;
+	ftp_rqfcr[rqfar] = rqfcr;
+	ftp_rqfpr[rqfar] = rqfpr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6 | RQFPR_UDP);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6 | RQFPR_TCP);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
+
+	/* cur_filer_idx indicated the fisrt non-masked rule */
+	priv->cur_filer_idx = rqfar;
+
+	/* Rest are masked rules */
+	rqfcr = RQFCR_CMP_NOMATCH;
+	for (i = 0; i < rqfar; i++) {
+		ftp_rqfcr[i] = rqfcr;
+		ftp_rqfpr[i] = rqfpr;
+		gfar_write_filer(priv, i, rqfcr, rqfpr);
+	}
+}
+
 /* Set up the ethernet device structure, private data,
  * and anything else we need before we start */
 static int gfar_probe(struct of_device *ofdev,
@@ -297,14 +845,17 @@
 	u32 tempval;
 	struct net_device *dev = NULL;
 	struct gfar_private *priv = NULL;
-	int err = 0;
+	struct gfar __iomem *regs = NULL;
+	int err = 0, i, grp_idx = 0;
 	int len_devname;
+	u32 rstat = 0, tstat = 0, rqueue = 0, tqueue = 0;
+	u32 isrg = 0;
+	u32 __iomem *baddr;
 
-	/* Create an ethernet device instance */
-	dev = alloc_etherdev(sizeof (*priv));
+	err = gfar_of_init(ofdev, &dev);
 
-	if (NULL == dev)
-		return -ENOMEM;
+	if (err)
+		return err;
 
 	priv = netdev_priv(dev);
 	priv->ndev = dev;
@@ -312,50 +863,46 @@
 	priv->node = ofdev->node;
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
-	err = gfar_of_init(dev);
-
-	if (err)
-		goto regs_fail;
-
-	spin_lock_init(&priv->txlock);
-	spin_lock_init(&priv->rxlock);
 	spin_lock_init(&priv->bflock);
 	INIT_WORK(&priv->reset_task, gfar_reset_task);
 
 	dev_set_drvdata(&ofdev->dev, priv);
+	regs = priv->gfargrp[0].regs;
 
 	/* Stop the DMA engine now, in case it was running before */
 	/* (The firmware could have used it, and left it running). */
 	gfar_halt(dev);
 
 	/* Reset MAC layer */
-	gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
+	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
 
 	/* We need to delay at least 3 TX clocks */
 	udelay(2);
 
 	tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-	gfar_write(&priv->regs->maccfg1, tempval);
+	gfar_write(&regs->maccfg1, tempval);
 
 	/* Initialize MACCFG2. */
-	gfar_write(&priv->regs->maccfg2, MACCFG2_INIT_SETTINGS);
+	gfar_write(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
 
 	/* Initialize ECNTRL */
-	gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS);
+	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
 	/* Set the dev->base_addr to the gfar reg region */
-	dev->base_addr = (unsigned long) (priv->regs);
+	dev->base_addr = (unsigned long) regs;
 
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
 	/* Fill in the dev structure */
 	dev->watchdog_timeo = TX_TIMEOUT;
-	netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT);
 	dev->mtu = 1500;
-
 	dev->netdev_ops = &gfar_netdev_ops;
 	dev->ethtool_ops = &gfar_ethtool_ops;
 
+	/* Register for napi ...We are registering NAPI for each grp */
+	for (i = 0; i < priv->num_grps; i++)
+		netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll, GFAR_DEV_WEIGHT);
+
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 		priv->rx_csum_enable = 1;
 		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
@@ -371,35 +918,35 @@
 		priv->extended_hash = 1;
 		priv->hash_width = 9;
 
-		priv->hash_regs[0] = &priv->regs->igaddr0;
-		priv->hash_regs[1] = &priv->regs->igaddr1;
-		priv->hash_regs[2] = &priv->regs->igaddr2;
-		priv->hash_regs[3] = &priv->regs->igaddr3;
-		priv->hash_regs[4] = &priv->regs->igaddr4;
-		priv->hash_regs[5] = &priv->regs->igaddr5;
-		priv->hash_regs[6] = &priv->regs->igaddr6;
-		priv->hash_regs[7] = &priv->regs->igaddr7;
-		priv->hash_regs[8] = &priv->regs->gaddr0;
-		priv->hash_regs[9] = &priv->regs->gaddr1;
-		priv->hash_regs[10] = &priv->regs->gaddr2;
-		priv->hash_regs[11] = &priv->regs->gaddr3;
-		priv->hash_regs[12] = &priv->regs->gaddr4;
-		priv->hash_regs[13] = &priv->regs->gaddr5;
-		priv->hash_regs[14] = &priv->regs->gaddr6;
-		priv->hash_regs[15] = &priv->regs->gaddr7;
+		priv->hash_regs[0] = &regs->igaddr0;
+		priv->hash_regs[1] = &regs->igaddr1;
+		priv->hash_regs[2] = &regs->igaddr2;
+		priv->hash_regs[3] = &regs->igaddr3;
+		priv->hash_regs[4] = &regs->igaddr4;
+		priv->hash_regs[5] = &regs->igaddr5;
+		priv->hash_regs[6] = &regs->igaddr6;
+		priv->hash_regs[7] = &regs->igaddr7;
+		priv->hash_regs[8] = &regs->gaddr0;
+		priv->hash_regs[9] = &regs->gaddr1;
+		priv->hash_regs[10] = &regs->gaddr2;
+		priv->hash_regs[11] = &regs->gaddr3;
+		priv->hash_regs[12] = &regs->gaddr4;
+		priv->hash_regs[13] = &regs->gaddr5;
+		priv->hash_regs[14] = &regs->gaddr6;
+		priv->hash_regs[15] = &regs->gaddr7;
 
 	} else {
 		priv->extended_hash = 0;
 		priv->hash_width = 8;
 
-		priv->hash_regs[0] = &priv->regs->gaddr0;
-		priv->hash_regs[1] = &priv->regs->gaddr1;
-		priv->hash_regs[2] = &priv->regs->gaddr2;
-		priv->hash_regs[3] = &priv->regs->gaddr3;
-		priv->hash_regs[4] = &priv->regs->gaddr4;
-		priv->hash_regs[5] = &priv->regs->gaddr5;
-		priv->hash_regs[6] = &priv->regs->gaddr6;
-		priv->hash_regs[7] = &priv->regs->gaddr7;
+		priv->hash_regs[0] = &regs->gaddr0;
+		priv->hash_regs[1] = &regs->gaddr1;
+		priv->hash_regs[2] = &regs->gaddr2;
+		priv->hash_regs[3] = &regs->gaddr3;
+		priv->hash_regs[4] = &regs->gaddr4;
+		priv->hash_regs[5] = &regs->gaddr5;
+		priv->hash_regs[6] = &regs->gaddr6;
+		priv->hash_regs[7] = &regs->gaddr7;
 	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
@@ -410,15 +957,70 @@
 	if (dev->features & NETIF_F_IP_CSUM)
 		dev->hard_header_len += GMAC_FCB_LEN;
 
-	priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
-	priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
-	priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
-	priv->num_txbdfree = DEFAULT_TX_RING_SIZE;
+	/* Program the isrg regs only if number of grps > 1 */
+	if (priv->num_grps > 1) {
+		baddr = &regs->isrg0;
+		for (i = 0; i < priv->num_grps; i++) {
+			isrg |= (priv->gfargrp[i].rx_bit_map << ISRG_SHIFT_RX);
+			isrg |= (priv->gfargrp[i].tx_bit_map << ISRG_SHIFT_TX);
+			gfar_write(baddr, isrg);
+			baddr++;
+			isrg = 0x0;
+		}
+	}
 
-	priv->txcoalescing = DEFAULT_TX_COALESCE;
-	priv->txic = DEFAULT_TXIC;
-	priv->rxcoalescing = DEFAULT_RX_COALESCE;
-	priv->rxic = DEFAULT_RXIC;
+	/* Need to reverse the bit maps as  bit_map's MSB is q0
+	 * but, for_each_bit parses from right to left, which
+	 * basically reverses the queue numbers */
+	for (i = 0; i< priv->num_grps; i++) {
+		priv->gfargrp[i].tx_bit_map = reverse_bitmap(
+				priv->gfargrp[i].tx_bit_map, MAX_TX_QS);
+		priv->gfargrp[i].rx_bit_map = reverse_bitmap(
+				priv->gfargrp[i].rx_bit_map, MAX_RX_QS);
+	}
+
+	/* Calculate RSTAT, TSTAT, RQUEUE and TQUEUE values,
+	 * also assign queues to groups */
+	for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
+		priv->gfargrp[grp_idx].num_rx_queues = 0x0;
+		for_each_bit(i, &priv->gfargrp[grp_idx].rx_bit_map,
+				priv->num_rx_queues) {
+			priv->gfargrp[grp_idx].num_rx_queues++;
+			priv->rx_queue[i]->grp = &priv->gfargrp[grp_idx];
+			rstat = rstat | (RSTAT_CLEAR_RHALT >> i);
+			rqueue = rqueue | ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
+		}
+		priv->gfargrp[grp_idx].num_tx_queues = 0x0;
+		for_each_bit (i, &priv->gfargrp[grp_idx].tx_bit_map,
+				priv->num_tx_queues) {
+			priv->gfargrp[grp_idx].num_tx_queues++;
+			priv->tx_queue[i]->grp = &priv->gfargrp[grp_idx];
+			tstat = tstat | (TSTAT_CLEAR_THALT >> i);
+			tqueue = tqueue | (TQUEUE_EN0 >> i);
+		}
+		priv->gfargrp[grp_idx].rstat = rstat;
+		priv->gfargrp[grp_idx].tstat = tstat;
+		rstat = tstat =0;
+	}
+
+	gfar_write(&regs->rqueue, rqueue);
+	gfar_write(&regs->tqueue, tqueue);
+
+	priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
+
+	/* Initializing some of the rx/tx queue level parameters */
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i]->tx_ring_size = DEFAULT_TX_RING_SIZE;
+		priv->tx_queue[i]->num_txbdfree = DEFAULT_TX_RING_SIZE;
+		priv->tx_queue[i]->txcoalescing = DEFAULT_TX_COALESCE;
+		priv->tx_queue[i]->txic = DEFAULT_TXIC;
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i]->rx_ring_size = DEFAULT_RX_RING_SIZE;
+		priv->rx_queue[i]->rxcoalescing = DEFAULT_RX_COALESCE;
+		priv->rx_queue[i]->rxic = DEFAULT_RXIC;
+	}
 
 	/* Enable most messages by default */
 	priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
@@ -439,20 +1041,43 @@
 
 	/* fill out IRQ number and name fields */
 	len_devname = strlen(dev->name);
-	strncpy(&priv->int_name_tx[0], dev->name, len_devname);
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		strncpy(&priv->int_name_tx[len_devname],
-			"_tx", sizeof("_tx") + 1);
+	for (i = 0; i < priv->num_grps; i++) {
+		strncpy(&priv->gfargrp[i].int_name_tx[0], dev->name,
+				len_devname);
+		if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
+			strncpy(&priv->gfargrp[i].int_name_tx[len_devname],
+				"_g", sizeof("_g"));
+			priv->gfargrp[i].int_name_tx[
+				strlen(priv->gfargrp[i].int_name_tx)] = i+48;
+			strncpy(&priv->gfargrp[i].int_name_tx[strlen(
+				priv->gfargrp[i].int_name_tx)],
+				"_tx", sizeof("_tx") + 1);
 
-		strncpy(&priv->int_name_rx[0], dev->name, len_devname);
-		strncpy(&priv->int_name_rx[len_devname],
-			"_rx", sizeof("_rx") + 1);
+			strncpy(&priv->gfargrp[i].int_name_rx[0], dev->name,
+					len_devname);
+			strncpy(&priv->gfargrp[i].int_name_rx[len_devname],
+					"_g", sizeof("_g"));
+			priv->gfargrp[i].int_name_rx[
+				strlen(priv->gfargrp[i].int_name_rx)] = i+48;
+			strncpy(&priv->gfargrp[i].int_name_rx[strlen(
+				priv->gfargrp[i].int_name_rx)],
+				"_rx", sizeof("_rx") + 1);
 
-		strncpy(&priv->int_name_er[0], dev->name, len_devname);
-		strncpy(&priv->int_name_er[len_devname],
-			"_er", sizeof("_er") + 1);
-	} else
-		priv->int_name_tx[len_devname] = '\0';
+			strncpy(&priv->gfargrp[i].int_name_er[0], dev->name,
+					len_devname);
+			strncpy(&priv->gfargrp[i].int_name_er[len_devname],
+				"_g", sizeof("_g"));
+			priv->gfargrp[i].int_name_er[strlen(
+					priv->gfargrp[i].int_name_er)] = i+48;
+			strncpy(&priv->gfargrp[i].int_name_er[strlen(\
+				priv->gfargrp[i].int_name_er)],
+				"_er", sizeof("_er") + 1);
+		} else
+			priv->gfargrp[i].int_name_tx[len_devname] = '\0';
+	}
+
+	/* Initialize the filer table */
+	gfar_init_filer_table(priv);
 
 	/* Create all the sysfs files */
 	gfar_init_sysfs(dev);
@@ -463,14 +1088,19 @@
 	/* Even more device info helps when determining which kernel */
 	/* provided which set of benchmarks. */
 	printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
-	printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n",
-	       dev->name, priv->rx_ring_size, priv->tx_ring_size);
+	for (i = 0; i < priv->num_rx_queues; i++)
+		printk(KERN_INFO "%s: :RX BD ring size for Q[%d]: %d\n",
+			dev->name, i, priv->rx_queue[i]->rx_ring_size);
+	for(i = 0; i < priv->num_tx_queues; i++)
+		 printk(KERN_INFO "%s:TX BD ring size for Q[%d]: %d\n",
+			dev->name, i, priv->tx_queue[i]->tx_ring_size);
 
 	return 0;
 
 register_fail:
-	iounmap(priv->regs);
-regs_fail:
+	unmap_group_regs(priv);
+	free_tx_pointers(priv);
+	free_rx_pointers(priv);
 	if (priv->phy_node)
 		of_node_put(priv->phy_node);
 	if (priv->tbi_node)
@@ -491,54 +1121,59 @@
 	dev_set_drvdata(&ofdev->dev, NULL);
 
 	unregister_netdev(priv->ndev);
-	iounmap(priv->regs);
+	unmap_group_regs(priv);
 	free_netdev(priv->ndev);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int gfar_suspend(struct of_device *ofdev, pm_message_t state)
+
+static int gfar_suspend(struct device *dev)
 {
-	struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
-	struct net_device *dev = priv->ndev;
+	struct gfar_private *priv = dev_get_drvdata(dev);
+	struct net_device *ndev = priv->ndev;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned long flags;
 	u32 tempval;
 
 	int magic_packet = priv->wol_en &&
 		(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
 
-	netif_device_detach(dev);
+	netif_device_detach(ndev);
 
-	if (netif_running(dev)) {
-		spin_lock_irqsave(&priv->txlock, flags);
-		spin_lock(&priv->rxlock);
+	if (netif_running(ndev)) {
 
-		gfar_halt_nodisable(dev);
+		local_irq_save(flags);
+		lock_tx_qs(priv);
+		lock_rx_qs(priv);
+
+		gfar_halt_nodisable(ndev);
 
 		/* Disable Tx, and Rx if wake-on-LAN is disabled. */
-		tempval = gfar_read(&priv->regs->maccfg1);
+		tempval = gfar_read(&regs->maccfg1);
 
 		tempval &= ~MACCFG1_TX_EN;
 
 		if (!magic_packet)
 			tempval &= ~MACCFG1_RX_EN;
 
-		gfar_write(&priv->regs->maccfg1, tempval);
+		gfar_write(&regs->maccfg1, tempval);
 
-		spin_unlock(&priv->rxlock);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		unlock_rx_qs(priv);
+		unlock_tx_qs(priv);
+		local_irq_restore(flags);
 
-		napi_disable(&priv->napi);
+		disable_napi(priv);
 
 		if (magic_packet) {
 			/* Enable interrupt on Magic Packet */
-			gfar_write(&priv->regs->imask, IMASK_MAG);
+			gfar_write(&regs->imask, IMASK_MAG);
 
 			/* Enable Magic Packet mode */
-			tempval = gfar_read(&priv->regs->maccfg2);
+			tempval = gfar_read(&regs->maccfg2);
 			tempval |= MACCFG2_MPEN;
-			gfar_write(&priv->regs->maccfg2, tempval);
+			gfar_write(&regs->maccfg2, tempval);
 		} else {
 			phy_stop(priv->phydev);
 		}
@@ -547,17 +1182,18 @@
 	return 0;
 }
 
-static int gfar_resume(struct of_device *ofdev)
+static int gfar_resume(struct device *dev)
 {
-	struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
-	struct net_device *dev = priv->ndev;
+	struct gfar_private *priv = dev_get_drvdata(dev);
+	struct net_device *ndev = priv->ndev;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned long flags;
 	u32 tempval;
 	int magic_packet = priv->wol_en &&
 		(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
 
-	if (!netif_running(dev)) {
-		netif_device_attach(dev);
+	if (!netif_running(ndev)) {
+		netif_device_attach(ndev);
 		return 0;
 	}
 
@@ -567,28 +1203,80 @@
 	/* Disable Magic Packet mode, in case something
 	 * else woke us up.
 	 */
+	local_irq_save(flags);
+	lock_tx_qs(priv);
+	lock_rx_qs(priv);
 
-	spin_lock_irqsave(&priv->txlock, flags);
-	spin_lock(&priv->rxlock);
-
-	tempval = gfar_read(&priv->regs->maccfg2);
+	tempval = gfar_read(&regs->maccfg2);
 	tempval &= ~MACCFG2_MPEN;
-	gfar_write(&priv->regs->maccfg2, tempval);
+	gfar_write(&regs->maccfg2, tempval);
 
-	gfar_start(dev);
+	gfar_start(ndev);
 
-	spin_unlock(&priv->rxlock);
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_rx_qs(priv);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
-	netif_device_attach(dev);
+	netif_device_attach(ndev);
 
-	napi_enable(&priv->napi);
+	enable_napi(priv);
 
 	return 0;
 }
+
+static int gfar_restore(struct device *dev)
+{
+	struct gfar_private *priv = dev_get_drvdata(dev);
+	struct net_device *ndev = priv->ndev;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	gfar_init_bds(ndev);
+	init_registers(ndev);
+	gfar_set_mac_address(ndev);
+	gfar_init_mac(ndev);
+	gfar_start(ndev);
+
+	priv->oldlink = 0;
+	priv->oldspeed = 0;
+	priv->oldduplex = -1;
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	netif_device_attach(ndev);
+	enable_napi(priv);
+
+	return 0;
+}
+
+static struct dev_pm_ops gfar_pm_ops = {
+	.suspend = gfar_suspend,
+	.resume = gfar_resume,
+	.freeze = gfar_suspend,
+	.thaw = gfar_resume,
+	.restore = gfar_restore,
+};
+
+#define GFAR_PM_OPS (&gfar_pm_ops)
+
+static int gfar_legacy_suspend(struct of_device *ofdev, pm_message_t state)
+{
+	return gfar_suspend(&ofdev->dev);
+}
+
+static int gfar_legacy_resume(struct of_device *ofdev)
+{
+	return gfar_resume(&ofdev->dev);
+}
+
 #else
-#define gfar_suspend NULL
-#define gfar_resume NULL
+
+#define GFAR_PM_OPS NULL
+#define gfar_legacy_suspend NULL
+#define gfar_legacy_resume NULL
+
 #endif
 
 /* Reads the controller's registers to determine what interface
@@ -597,7 +1285,10 @@
 static phy_interface_t gfar_get_interface(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 ecntrl = gfar_read(&priv->regs->ecntrl);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 ecntrl;
+
+	ecntrl = gfar_read(&regs->ecntrl);
 
 	if (ecntrl & ECNTRL_SGMII_MODE)
 		return PHY_INTERFACE_MODE_SGMII;
@@ -719,46 +1410,52 @@
 static void init_registers(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = NULL;
+	int i = 0;
 
-	/* Clear IEVENT */
-	gfar_write(&priv->regs->ievent, IEVENT_INIT_CLEAR);
+	for (i = 0; i < priv->num_grps; i++) {
+		regs = priv->gfargrp[i].regs;
+		/* Clear IEVENT */
+		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
 
-	/* Initialize IMASK */
-	gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR);
+		/* Initialize IMASK */
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	}
 
+	regs = priv->gfargrp[0].regs;
 	/* Init hash registers to zero */
-	gfar_write(&priv->regs->igaddr0, 0);
-	gfar_write(&priv->regs->igaddr1, 0);
-	gfar_write(&priv->regs->igaddr2, 0);
-	gfar_write(&priv->regs->igaddr3, 0);
-	gfar_write(&priv->regs->igaddr4, 0);
-	gfar_write(&priv->regs->igaddr5, 0);
-	gfar_write(&priv->regs->igaddr6, 0);
-	gfar_write(&priv->regs->igaddr7, 0);
+	gfar_write(&regs->igaddr0, 0);
+	gfar_write(&regs->igaddr1, 0);
+	gfar_write(&regs->igaddr2, 0);
+	gfar_write(&regs->igaddr3, 0);
+	gfar_write(&regs->igaddr4, 0);
+	gfar_write(&regs->igaddr5, 0);
+	gfar_write(&regs->igaddr6, 0);
+	gfar_write(&regs->igaddr7, 0);
 
-	gfar_write(&priv->regs->gaddr0, 0);
-	gfar_write(&priv->regs->gaddr1, 0);
-	gfar_write(&priv->regs->gaddr2, 0);
-	gfar_write(&priv->regs->gaddr3, 0);
-	gfar_write(&priv->regs->gaddr4, 0);
-	gfar_write(&priv->regs->gaddr5, 0);
-	gfar_write(&priv->regs->gaddr6, 0);
-	gfar_write(&priv->regs->gaddr7, 0);
+	gfar_write(&regs->gaddr0, 0);
+	gfar_write(&regs->gaddr1, 0);
+	gfar_write(&regs->gaddr2, 0);
+	gfar_write(&regs->gaddr3, 0);
+	gfar_write(&regs->gaddr4, 0);
+	gfar_write(&regs->gaddr5, 0);
+	gfar_write(&regs->gaddr6, 0);
+	gfar_write(&regs->gaddr7, 0);
 
 	/* Zero out the rmon mib registers if it has them */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
+		memset_io(&(regs->rmon), 0, sizeof (struct rmon_mib));
 
 		/* Mask off the CAM interrupts */
-		gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
-		gfar_write(&priv->regs->rmon.cam2, 0xffffffff);
+		gfar_write(&regs->rmon.cam1, 0xffffffff);
+		gfar_write(&regs->rmon.cam2, 0xffffffff);
 	}
 
 	/* Initialize the max receive buffer length */
-	gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
+	gfar_write(&regs->mrblr, priv->rx_buffer_size);
 
 	/* Initialize the Minimum Frame Length Register */
-	gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
+	gfar_write(&regs->minflr, MINFLR_INIT_SETTINGS);
 }
 
 
@@ -766,23 +1463,28 @@
 static void gfar_halt_nodisable(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = NULL;
 	u32 tempval;
+	int i = 0;
 
-	/* Mask all interrupts */
-	gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	for (i = 0; i < priv->num_grps; i++) {
+		regs = priv->gfargrp[i].regs;
+		/* Mask all interrupts */
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 
-	/* Clear all interrupts */
-	gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
+		/* Clear all interrupts */
+		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
+	}
 
+	regs = priv->gfargrp[0].regs;
 	/* Stop the DMA, and wait for it to stop */
-	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval = gfar_read(&regs->dmactrl);
 	if ((tempval & (DMACTRL_GRS | DMACTRL_GTS))
 	    != (DMACTRL_GRS | DMACTRL_GTS)) {
 		tempval |= (DMACTRL_GRS | DMACTRL_GTS);
-		gfar_write(&priv->regs->dmactrl, tempval);
+		gfar_write(&regs->dmactrl, tempval);
 
-		while (!(gfar_read(&priv->regs->ievent) &
+		while (!(gfar_read(&regs->ievent) &
 			 (IEVENT_GRSC | IEVENT_GTSC)))
 			cpu_relax();
 	}
@@ -792,7 +1494,7 @@
 void gfar_halt(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 
 	gfar_halt_nodisable(dev);
@@ -803,101 +1505,131 @@
 	gfar_write(&regs->maccfg1, tempval);
 }
 
+static void free_grp_irqs(struct gfar_priv_grp *grp)
+{
+	free_irq(grp->interruptError, grp);
+	free_irq(grp->interruptTransmit, grp);
+	free_irq(grp->interruptReceive, grp);
+}
+
 void stop_gfar(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
 	unsigned long flags;
+	int i;
 
 	phy_stop(priv->phydev);
 
+
 	/* Lock it down */
-	spin_lock_irqsave(&priv->txlock, flags);
-	spin_lock(&priv->rxlock);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
+	lock_rx_qs(priv);
 
 	gfar_halt(dev);
 
-	spin_unlock(&priv->rxlock);
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_rx_qs(priv);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	/* Free the IRQs */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		free_irq(priv->interruptError, dev);
-		free_irq(priv->interruptTransmit, dev);
-		free_irq(priv->interruptReceive, dev);
+		for (i = 0; i < priv->num_grps; i++)
+			free_grp_irqs(&priv->gfargrp[i]);
 	} else {
-		free_irq(priv->interruptTransmit, dev);
+		for (i = 0; i < priv->num_grps; i++)
+			free_irq(priv->gfargrp[i].interruptTransmit,
+					&priv->gfargrp[i]);
 	}
 
 	free_skb_resources(priv);
+}
 
-	dma_free_coherent(&priv->ofdev->dev,
-			sizeof(struct txbd8)*priv->tx_ring_size
-			+ sizeof(struct rxbd8)*priv->rx_ring_size,
-			priv->tx_bd_base,
-			gfar_read(&regs->tbase0));
+static void free_skb_tx_queue(struct gfar_priv_tx_q *tx_queue)
+{
+	struct txbd8 *txbdp;
+	struct gfar_private *priv = netdev_priv(tx_queue->dev);
+	int i, j;
+
+	txbdp = tx_queue->tx_bd_base;
+
+	for (i = 0; i < tx_queue->tx_ring_size; i++) {
+		if (!tx_queue->tx_skbuff[i])
+			continue;
+
+		dma_unmap_single(&priv->ofdev->dev, txbdp->bufPtr,
+				txbdp->length, DMA_TO_DEVICE);
+		txbdp->lstatus = 0;
+		for (j = 0; j < skb_shinfo(tx_queue->tx_skbuff[i])->nr_frags;
+				j++) {
+			txbdp++;
+			dma_unmap_page(&priv->ofdev->dev, txbdp->bufPtr,
+					txbdp->length, DMA_TO_DEVICE);
+		}
+		txbdp++;
+		dev_kfree_skb_any(tx_queue->tx_skbuff[i]);
+		tx_queue->tx_skbuff[i] = NULL;
+	}
+	kfree(tx_queue->tx_skbuff);
+}
+
+static void free_skb_rx_queue(struct gfar_priv_rx_q *rx_queue)
+{
+	struct rxbd8 *rxbdp;
+	struct gfar_private *priv = netdev_priv(rx_queue->dev);
+	int i;
+
+	rxbdp = rx_queue->rx_bd_base;
+
+	for (i = 0; i < rx_queue->rx_ring_size; i++) {
+		if (rx_queue->rx_skbuff[i]) {
+			dma_unmap_single(&priv->ofdev->dev,
+					rxbdp->bufPtr, priv->rx_buffer_size,
+					DMA_FROM_DEVICE);
+			dev_kfree_skb_any(rx_queue->rx_skbuff[i]);
+			rx_queue->rx_skbuff[i] = NULL;
+		}
+		rxbdp->lstatus = 0;
+		rxbdp->bufPtr = 0;
+		rxbdp++;
+	}
+	kfree(rx_queue->rx_skbuff);
 }
 
 /* If there are any tx skbs or rx skbs still around, free them.
  * Then free tx_skbuff and rx_skbuff */
 static void free_skb_resources(struct gfar_private *priv)
 {
-	struct rxbd8 *rxbdp;
-	struct txbd8 *txbdp;
-	int i, j;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	int i;
 
 	/* Go through all the buffer descriptors and free their data buffers */
-	txbdp = priv->tx_bd_base;
-
-	for (i = 0; i < priv->tx_ring_size; i++) {
-		if (!priv->tx_skbuff[i])
-			continue;
-
-		dma_unmap_single(&priv->ofdev->dev, txbdp->bufPtr,
-				txbdp->length, DMA_TO_DEVICE);
-		txbdp->lstatus = 0;
-		for (j = 0; j < skb_shinfo(priv->tx_skbuff[i])->nr_frags; j++) {
-			txbdp++;
-			dma_unmap_page(&priv->ofdev->dev, txbdp->bufPtr,
-					txbdp->length, DMA_TO_DEVICE);
-		}
-		txbdp++;
-		dev_kfree_skb_any(priv->tx_skbuff[i]);
-		priv->tx_skbuff[i] = NULL;
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		if(!tx_queue->tx_skbuff)
+			free_skb_tx_queue(tx_queue);
 	}
 
-	kfree(priv->tx_skbuff);
-
-	rxbdp = priv->rx_bd_base;
-
-	/* rx_skbuff is not guaranteed to be allocated, so only
-	 * free it and its contents if it is allocated */
-	if(priv->rx_skbuff != NULL) {
-		for (i = 0; i < priv->rx_ring_size; i++) {
-			if (priv->rx_skbuff[i]) {
-				dma_unmap_single(&priv->ofdev->dev, rxbdp->bufPtr,
-						priv->rx_buffer_size,
-						DMA_FROM_DEVICE);
-
-				dev_kfree_skb_any(priv->rx_skbuff[i]);
-				priv->rx_skbuff[i] = NULL;
-			}
-
-			rxbdp->lstatus = 0;
-			rxbdp->bufPtr = 0;
-
-			rxbdp++;
-		}
-
-		kfree(priv->rx_skbuff);
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		if(!rx_queue->rx_skbuff)
+			free_skb_rx_queue(rx_queue);
 	}
+
+	dma_free_coherent(&priv->ofdev->dev,
+			sizeof(struct txbd8) * priv->total_tx_ring_size +
+			sizeof(struct rxbd8) * priv->total_rx_ring_size,
+			priv->tx_queue[0]->tx_bd_base,
+			priv->tx_queue[0]->tx_bd_dma_base);
 }
 
 void gfar_start(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
+	int i = 0;
 
 	/* Enable Rx and Tx in MACCFG1 */
 	tempval = gfar_read(&regs->maccfg1);
@@ -905,269 +1637,159 @@
 	gfar_write(&regs->maccfg1, tempval);
 
 	/* Initialize DMACTRL to have WWR and WOP */
-	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval = gfar_read(&regs->dmactrl);
 	tempval |= DMACTRL_INIT_SETTINGS;
-	gfar_write(&priv->regs->dmactrl, tempval);
+	gfar_write(&regs->dmactrl, tempval);
 
 	/* Make sure we aren't stopped */
-	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval = gfar_read(&regs->dmactrl);
 	tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
-	gfar_write(&priv->regs->dmactrl, tempval);
+	gfar_write(&regs->dmactrl, tempval);
 
-	/* Clear THLT/RHLT, so that the DMA starts polling now */
-	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
-	gfar_write(&regs->rstat, RSTAT_CLEAR_RHALT);
-
-	/* Unmask the interrupts we look for */
-	gfar_write(&regs->imask, IMASK_DEFAULT);
+	for (i = 0; i < priv->num_grps; i++) {
+		regs = priv->gfargrp[i].regs;
+		/* Clear THLT/RHLT, so that the DMA starts polling now */
+		gfar_write(&regs->tstat, priv->gfargrp[i].tstat);
+		gfar_write(&regs->rstat, priv->gfargrp[i].rstat);
+		/* Unmask the interrupts we look for */
+		gfar_write(&regs->imask, IMASK_DEFAULT);
+	}
 
 	dev->trans_start = jiffies;
 }
 
-/* Bring the controller up and running */
-int startup_gfar(struct net_device *dev)
+void gfar_configure_coalescing(struct gfar_private *priv,
+	unsigned long tx_mask, unsigned long rx_mask)
 {
-	struct txbd8 *txbdp;
-	struct rxbd8 *rxbdp;
-	dma_addr_t addr = 0;
-	unsigned long vaddr;
-	int i;
-	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
-	int err = 0;
-	u32 rctrl = 0;
-	u32 tctrl = 0;
-	u32 attrs = 0;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 __iomem *baddr;
+	int i = 0;
 
-	gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	/* Backward compatible case ---- even if we enable
+	 * multiple queues, there's only single reg to program
+	 */
+	gfar_write(&regs->txic, 0);
+	if(likely(priv->tx_queue[0]->txcoalescing))
+		gfar_write(&regs->txic, priv->tx_queue[0]->txic);
 
-	/* Allocate memory for the buffer descriptors */
-	vaddr = (unsigned long) dma_alloc_coherent(&priv->ofdev->dev,
-			sizeof (struct txbd8) * priv->tx_ring_size +
-			sizeof (struct rxbd8) * priv->rx_ring_size,
-			&addr, GFP_KERNEL);
+	gfar_write(&regs->rxic, 0);
+	if(unlikely(priv->rx_queue[0]->rxcoalescing))
+		gfar_write(&regs->rxic, priv->rx_queue[0]->rxic);
 
-	if (vaddr == 0) {
-		if (netif_msg_ifup(priv))
-			printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n",
-					dev->name);
-		return -ENOMEM;
-	}
-
-	priv->tx_bd_base = (struct txbd8 *) vaddr;
-
-	/* enet DMA only understands physical addresses */
-	gfar_write(&regs->tbase0, addr);
-
-	/* Start the rx descriptor ring where the tx ring leaves off */
-	addr = addr + sizeof (struct txbd8) * priv->tx_ring_size;
-	vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size;
-	priv->rx_bd_base = (struct rxbd8 *) vaddr;
-	gfar_write(&regs->rbase0, addr);
-
-	/* Setup the skbuff rings */
-	priv->tx_skbuff =
-	    (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
-					priv->tx_ring_size, GFP_KERNEL);
-
-	if (NULL == priv->tx_skbuff) {
-		if (netif_msg_ifup(priv))
-			printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
-					dev->name);
-		err = -ENOMEM;
-		goto tx_skb_fail;
-	}
-
-	for (i = 0; i < priv->tx_ring_size; i++)
-		priv->tx_skbuff[i] = NULL;
-
-	priv->rx_skbuff =
-	    (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
-					priv->rx_ring_size, GFP_KERNEL);
-
-	if (NULL == priv->rx_skbuff) {
-		if (netif_msg_ifup(priv))
-			printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
-					dev->name);
-		err = -ENOMEM;
-		goto rx_skb_fail;
-	}
-
-	for (i = 0; i < priv->rx_ring_size; i++)
-		priv->rx_skbuff[i] = NULL;
-
-	/* Initialize some variables in our dev structure */
-	priv->num_txbdfree = priv->tx_ring_size;
-	priv->dirty_tx = priv->cur_tx = priv->tx_bd_base;
-	priv->cur_rx = priv->rx_bd_base;
-	priv->skb_curtx = priv->skb_dirtytx = 0;
-	priv->skb_currx = 0;
-
-	/* Initialize Transmit Descriptor Ring */
-	txbdp = priv->tx_bd_base;
-	for (i = 0; i < priv->tx_ring_size; i++) {
-		txbdp->lstatus = 0;
-		txbdp->bufPtr = 0;
-		txbdp++;
-	}
-
-	/* Set the last descriptor in the ring to indicate wrap */
-	txbdp--;
-	txbdp->status |= TXBD_WRAP;
-
-	rxbdp = priv->rx_bd_base;
-	for (i = 0; i < priv->rx_ring_size; i++) {
-		struct sk_buff *skb;
-
-		skb = gfar_new_skb(dev);
-
-		if (!skb) {
-			printk(KERN_ERR "%s: Can't allocate RX buffers\n",
-					dev->name);
-
-			goto err_rxalloc_fail;
+	if (priv->mode == MQ_MG_MODE) {
+		baddr = &regs->txic0;
+		for_each_bit (i, &tx_mask, priv->num_tx_queues) {
+			if (likely(priv->tx_queue[i]->txcoalescing)) {
+				gfar_write(baddr + i, 0);
+				gfar_write(baddr + i, priv->tx_queue[i]->txic);
+			}
 		}
 
-		priv->rx_skbuff[i] = skb;
-
-		gfar_new_rxbdp(dev, rxbdp, skb);
-
-		rxbdp++;
+		baddr = &regs->rxic0;
+		for_each_bit (i, &rx_mask, priv->num_rx_queues) {
+			if (likely(priv->rx_queue[i]->rxcoalescing)) {
+				gfar_write(baddr + i, 0);
+				gfar_write(baddr + i, priv->rx_queue[i]->rxic);
+			}
+		}
 	}
+}
 
-	/* Set the last descriptor in the ring to wrap */
-	rxbdp--;
-	rxbdp->status |= RXBD_WRAP;
+static int register_grp_irqs(struct gfar_priv_grp *grp)
+{
+	struct gfar_private *priv = grp->priv;
+	struct net_device *dev = priv->ndev;
+	int err;
 
 	/* If the device has multiple interrupts, register for
 	 * them.  Otherwise, only register for the one */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
 		/* Install our interrupt handlers for Error,
 		 * Transmit, and Receive */
-		if (request_irq(priv->interruptError, gfar_error,
-				0, priv->int_name_er, dev) < 0) {
+		if ((err = request_irq(grp->interruptError, gfar_error, 0,
+				grp->int_name_er,grp)) < 0) {
 			if (netif_msg_intr(priv))
 				printk(KERN_ERR "%s: Can't get IRQ %d\n",
-					dev->name, priv->interruptError);
+					dev->name, grp->interruptError);
 
-			err = -1;
-			goto err_irq_fail;
+				goto err_irq_fail;
 		}
 
-		if (request_irq(priv->interruptTransmit, gfar_transmit,
-				0, priv->int_name_tx, dev) < 0) {
+		if ((err = request_irq(grp->interruptTransmit, gfar_transmit,
+				0, grp->int_name_tx, grp)) < 0) {
 			if (netif_msg_intr(priv))
 				printk(KERN_ERR "%s: Can't get IRQ %d\n",
-					dev->name, priv->interruptTransmit);
-
-			err = -1;
-
+					dev->name, grp->interruptTransmit);
 			goto tx_irq_fail;
 		}
 
-		if (request_irq(priv->interruptReceive, gfar_receive,
-				0, priv->int_name_rx, dev) < 0) {
+		if ((err = request_irq(grp->interruptReceive, gfar_receive, 0,
+				grp->int_name_rx, grp)) < 0) {
 			if (netif_msg_intr(priv))
-				printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n",
-						dev->name, priv->interruptReceive);
-
-			err = -1;
+				printk(KERN_ERR "%s: Can't get IRQ %d\n",
+					dev->name, grp->interruptReceive);
 			goto rx_irq_fail;
 		}
 	} else {
-		if (request_irq(priv->interruptTransmit, gfar_interrupt,
-				0, priv->int_name_tx, dev) < 0) {
+		if ((err = request_irq(grp->interruptTransmit, gfar_interrupt, 0,
+				grp->int_name_tx, grp)) < 0) {
 			if (netif_msg_intr(priv))
 				printk(KERN_ERR "%s: Can't get IRQ %d\n",
-					dev->name, priv->interruptTransmit);
-
-			err = -1;
+					dev->name, grp->interruptTransmit);
 			goto err_irq_fail;
 		}
 	}
 
-	phy_start(priv->phydev);
-
-	/* Configure the coalescing support */
-	gfar_write(&regs->txic, 0);
-	if (priv->txcoalescing)
-		gfar_write(&regs->txic, priv->txic);
-
-	gfar_write(&regs->rxic, 0);
-	if (priv->rxcoalescing)
-		gfar_write(&regs->rxic, priv->rxic);
-
-	if (priv->rx_csum_enable)
-		rctrl |= RCTRL_CHECKSUMMING;
-
-	if (priv->extended_hash) {
-		rctrl |= RCTRL_EXTHASH;
-
-		gfar_clear_exact_match(dev);
-		rctrl |= RCTRL_EMEN;
-	}
-
-	if (priv->padding) {
-		rctrl &= ~RCTRL_PAL_MASK;
-		rctrl |= RCTRL_PADDING(priv->padding);
-	}
-
-	/* keep vlan related bits if it's enabled */
-	if (priv->vlgrp) {
-		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
-		tctrl |= TCTRL_VLINS;
-	}
-
-	/* Init rctrl based on our settings */
-	gfar_write(&priv->regs->rctrl, rctrl);
-
-	if (dev->features & NETIF_F_IP_CSUM)
-		tctrl |= TCTRL_INIT_CSUM;
-
-	gfar_write(&priv->regs->tctrl, tctrl);
-
-	/* Set the extraction length and index */
-	attrs = ATTRELI_EL(priv->rx_stash_size) |
-		ATTRELI_EI(priv->rx_stash_index);
-
-	gfar_write(&priv->regs->attreli, attrs);
-
-	/* Start with defaults, and add stashing or locking
-	 * depending on the approprate variables */
-	attrs = ATTR_INIT_SETTINGS;
-
-	if (priv->bd_stash_en)
-		attrs |= ATTR_BDSTASH;
-
-	if (priv->rx_stash_size != 0)
-		attrs |= ATTR_BUFSTASH;
-
-	gfar_write(&priv->regs->attr, attrs);
-
-	gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
-	gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
-	gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
-
-	/* Start the controller */
-	gfar_start(dev);
-
 	return 0;
 
 rx_irq_fail:
-	free_irq(priv->interruptTransmit, dev);
+	free_irq(grp->interruptTransmit, grp);
 tx_irq_fail:
-	free_irq(priv->interruptError, dev);
+	free_irq(grp->interruptError, grp);
 err_irq_fail:
-err_rxalloc_fail:
-rx_skb_fail:
-	free_skb_resources(priv);
-tx_skb_fail:
-	dma_free_coherent(&priv->ofdev->dev,
-			sizeof(struct txbd8)*priv->tx_ring_size
-			+ sizeof(struct rxbd8)*priv->rx_ring_size,
-			priv->tx_bd_base,
-			gfar_read(&regs->tbase0));
+	return err;
 
+}
+
+/* Bring the controller up and running */
+int startup_gfar(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct gfar __iomem *regs = NULL;
+	int err, i, j;
+
+	for (i = 0; i < priv->num_grps; i++) {
+		regs= priv->gfargrp[i].regs;
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	}
+
+	regs= priv->gfargrp[0].regs;
+	err = gfar_alloc_skb_resources(ndev);
+	if (err)
+		return err;
+
+	gfar_init_mac(ndev);
+
+	for (i = 0; i < priv->num_grps; i++) {
+		err = register_grp_irqs(&priv->gfargrp[i]);
+		if (err) {
+			for (j = 0; j < i; j++)
+				free_grp_irqs(&priv->gfargrp[j]);
+				goto irq_fail;
+		}
+	}
+
+	/* Start the controller */
+	gfar_start(ndev);
+
+	phy_start(priv->phydev);
+
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
+
+	return 0;
+
+irq_fail:
+	free_skb_resources(priv);
 	return err;
 }
 
@@ -1178,7 +1800,7 @@
 	struct gfar_private *priv = netdev_priv(dev);
 	int err;
 
-	napi_enable(&priv->napi);
+	enable_napi(priv);
 
 	skb_queue_head_init(&priv->rx_recycle);
 
@@ -1189,18 +1811,18 @@
 
 	err = init_phy(dev);
 
-	if(err) {
-		napi_disable(&priv->napi);
+	if (err) {
+		disable_napi(priv);
 		return err;
 	}
 
 	err = startup_gfar(dev);
 	if (err) {
-		napi_disable(&priv->napi);
+		disable_napi(priv);
 		return err;
 	}
 
-	netif_start_queue(dev);
+	netif_tx_start_all_queues(dev);
 
 	device_set_wakeup_enable(&dev->dev, priv->wol_en);
 
@@ -1269,15 +1891,23 @@
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct netdev_queue *txq;
+	struct gfar __iomem *regs = NULL;
 	struct txfcb *fcb = NULL;
 	struct txbd8 *txbdp, *txbdp_start, *base;
 	u32 lstatus;
-	int i;
+	int i, rq = 0;
 	u32 bufaddr;
 	unsigned long flags;
 	unsigned int nr_frags, length;
 
-	base = priv->tx_bd_base;
+
+	rq = skb->queue_mapping;
+	tx_queue = priv->tx_queue[rq];
+	txq = netdev_get_tx_queue(dev, rq);
+	base = tx_queue->tx_bd_base;
+	regs = tx_queue->grp->regs;
 
 	/* make space for additional header when fcb is needed */
 	if (((skb->ip_summed == CHECKSUM_PARTIAL) ||
@@ -1298,21 +1928,18 @@
 	/* total number of fragments in the SKB */
 	nr_frags = skb_shinfo(skb)->nr_frags;
 
-	spin_lock_irqsave(&priv->txlock, flags);
-
 	/* check if there is space to queue this packet */
-	if ((nr_frags+1) > priv->num_txbdfree) {
+	if ((nr_frags+1) > tx_queue->num_txbdfree) {
 		/* no space, stop the queue */
-		netif_stop_queue(dev);
+		netif_tx_stop_queue(txq);
 		dev->stats.tx_fifo_errors++;
-		spin_unlock_irqrestore(&priv->txlock, flags);
 		return NETDEV_TX_BUSY;
 	}
 
 	/* Update transmit stats */
 	dev->stats.tx_bytes += skb->len;
 
-	txbdp = txbdp_start = priv->cur_tx;
+	txbdp = txbdp_start = tx_queue->cur_tx;
 
 	if (nr_frags == 0) {
 		lstatus = txbdp->lstatus | BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
@@ -1320,7 +1947,7 @@
 		/* Place the fragment addresses and lengths into the TxBDs */
 		for (i = 0; i < nr_frags; i++) {
 			/* Point at the next BD, wrapping as needed */
-			txbdp = next_txbd(txbdp, base, priv->tx_ring_size);
+			txbdp = next_txbd(txbdp, base, tx_queue->tx_ring_size);
 
 			length = skb_shinfo(skb)->frags[i].size;
 
@@ -1362,13 +1989,27 @@
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	priv->tx_skbuff[priv->skb_curtx] = skb;
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
 	lstatus |= BD_LFLAG(TXBD_CRC | TXBD_READY) | skb_headlen(skb);
 
 	/*
+	 * We can work in parallel with gfar_clean_tx_ring(), except
+	 * when modifying num_txbdfree. Note that we didn't grab the lock
+	 * when we were reading the num_txbdfree and checking for available
+	 * space, that's because outside of this function it can only grow,
+	 * and once we've got needed space, it cannot suddenly disappear.
+	 *
+	 * The lock also protects us from gfar_error(), which can modify
+	 * regs->tstat and thus retrigger the transfers, which is why we
+	 * also must grab the lock before setting ready bit for the first
+	 * to be transmitted BD.
+	 */
+	spin_lock_irqsave(&tx_queue->txlock, flags);
+
+	/*
 	 * The powerpc-specific eieio() is used, as wmb() has too strong
 	 * semantics (it requires synchronization between cacheable and
 	 * uncacheable mappings, which eieio doesn't provide and which we
@@ -1382,29 +2023,29 @@
 
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
-	priv->skb_curtx = (priv->skb_curtx + 1) &
-		TX_RING_MOD_MASK(priv->tx_ring_size);
+	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
+		TX_RING_MOD_MASK(tx_queue->tx_ring_size);
 
-	priv->cur_tx = next_txbd(txbdp, base, priv->tx_ring_size);
+	tx_queue->cur_tx = next_txbd(txbdp, base, tx_queue->tx_ring_size);
 
 	/* reduce TxBD free count */
-	priv->num_txbdfree -= (nr_frags + 1);
+	tx_queue->num_txbdfree -= (nr_frags + 1);
 
 	dev->trans_start = jiffies;
 
 	/* If the next BD still needs to be cleaned up, then the bds
 	   are full.  We need to tell the kernel to stop sending us stuff. */
-	if (!priv->num_txbdfree) {
-		netif_stop_queue(dev);
+	if (!tx_queue->num_txbdfree) {
+		netif_tx_stop_queue(txq);
 
 		dev->stats.tx_fifo_errors++;
 	}
 
 	/* Tell the DMA to go go go */
-	gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
+	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT >> tx_queue->qindex);
 
 	/* Unlock priv */
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	spin_unlock_irqrestore(&tx_queue->txlock, flags);
 
 	return NETDEV_TX_OK;
 }
@@ -1414,7 +2055,7 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	napi_disable(&priv->napi);
+	disable_napi(priv);
 
 	skb_queue_purge(&priv->rx_recycle);
 	cancel_work_sync(&priv->reset_task);
@@ -1424,7 +2065,7 @@
 	phy_disconnect(priv->phydev);
 	priv->phydev = NULL;
 
-	netif_stop_queue(dev);
+	netif_tx_stop_all_queues(dev);
 
 	return 0;
 }
@@ -1443,50 +2084,55 @@
 		struct vlan_group *grp)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = NULL;
 	unsigned long flags;
 	u32 tempval;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+	regs = priv->gfargrp[0].regs;
+	local_irq_save(flags);
+	lock_rx_qs(priv);
 
 	priv->vlgrp = grp;
 
 	if (grp) {
 		/* Enable VLAN tag insertion */
-		tempval = gfar_read(&priv->regs->tctrl);
+		tempval = gfar_read(&regs->tctrl);
 		tempval |= TCTRL_VLINS;
 
-		gfar_write(&priv->regs->tctrl, tempval);
+		gfar_write(&regs->tctrl, tempval);
 
 		/* Enable VLAN tag extraction */
-		tempval = gfar_read(&priv->regs->rctrl);
+		tempval = gfar_read(&regs->rctrl);
 		tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
-		gfar_write(&priv->regs->rctrl, tempval);
+		gfar_write(&regs->rctrl, tempval);
 	} else {
 		/* Disable VLAN tag insertion */
-		tempval = gfar_read(&priv->regs->tctrl);
+		tempval = gfar_read(&regs->tctrl);
 		tempval &= ~TCTRL_VLINS;
-		gfar_write(&priv->regs->tctrl, tempval);
+		gfar_write(&regs->tctrl, tempval);
 
 		/* Disable VLAN tag extraction */
-		tempval = gfar_read(&priv->regs->rctrl);
+		tempval = gfar_read(&regs->rctrl);
 		tempval &= ~RCTRL_VLEX;
 		/* If parse is no longer required, then disable parser */
 		if (tempval & RCTRL_REQ_PARSER)
 			tempval |= RCTRL_PRSDEP_INIT;
 		else
 			tempval &= ~RCTRL_PRSDEP_INIT;
-		gfar_write(&priv->regs->rctrl, tempval);
+		gfar_write(&regs->rctrl, tempval);
 	}
 
 	gfar_change_mtu(dev, dev->mtu);
 
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 }
 
 static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 {
 	int tempsize, tempval;
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	int oldsize = priv->rx_buffer_size;
 	int frame_size = new_mtu + ETH_HLEN;
 
@@ -1518,20 +2164,20 @@
 
 	dev->mtu = new_mtu;
 
-	gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
-	gfar_write(&priv->regs->maxfrm, priv->rx_buffer_size);
+	gfar_write(&regs->mrblr, priv->rx_buffer_size);
+	gfar_write(&regs->maxfrm, priv->rx_buffer_size);
 
 	/* If the mtu is larger than the max size for standard
 	 * ethernet frames (ie, a jumbo frame), then set maccfg2
 	 * to allow huge frames, and to check the length */
-	tempval = gfar_read(&priv->regs->maccfg2);
+	tempval = gfar_read(&regs->maccfg2);
 
 	if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
 		tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
 	else
 		tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
 
-	gfar_write(&priv->regs->maccfg2, tempval);
+	gfar_write(&regs->maccfg2, tempval);
 
 	if ((oldsize != tempsize) && (dev->flags & IFF_UP))
 		startup_gfar(dev);
@@ -1551,10 +2197,10 @@
 	struct net_device *dev = priv->ndev;
 
 	if (dev->flags & IFF_UP) {
-		netif_stop_queue(dev);
+		netif_tx_stop_all_queues(dev);
 		stop_gfar(dev);
 		startup_gfar(dev);
-		netif_start_queue(dev);
+		netif_tx_start_all_queues(dev);
 	}
 
 	netif_tx_schedule_all(dev);
@@ -1569,24 +2215,29 @@
 }
 
 /* Interrupt Handler for Transmit complete */
-static int gfar_clean_tx_ring(struct net_device *dev)
+static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 {
+	struct net_device *dev = tx_queue->dev;
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_rx_q *rx_queue = NULL;
 	struct txbd8 *bdp;
 	struct txbd8 *lbdp = NULL;
-	struct txbd8 *base = priv->tx_bd_base;
+	struct txbd8 *base = tx_queue->tx_bd_base;
 	struct sk_buff *skb;
 	int skb_dirtytx;
-	int tx_ring_size = priv->tx_ring_size;
+	int tx_ring_size = tx_queue->tx_ring_size;
 	int frags = 0;
 	int i;
 	int howmany = 0;
 	u32 lstatus;
 
-	bdp = priv->dirty_tx;
-	skb_dirtytx = priv->skb_dirtytx;
+	rx_queue = priv->rx_queue[tx_queue->qindex];
+	bdp = tx_queue->dirty_tx;
+	skb_dirtytx = tx_queue->skb_dirtytx;
 
-	while ((skb = priv->tx_skbuff[skb_dirtytx])) {
+	while ((skb = tx_queue->tx_skbuff[skb_dirtytx])) {
+		unsigned long flags;
+
 		frags = skb_shinfo(skb)->nr_frags;
 		lbdp = skip_txbd(bdp, frags, base, tx_ring_size);
 
@@ -1618,82 +2269,73 @@
 		 * If there's room in the queue (limit it to rx_buffer_size)
 		 * we add this skb back into the pool, if it's the right size
 		 */
-		if (skb_queue_len(&priv->rx_recycle) < priv->rx_ring_size &&
+		if (skb_queue_len(&priv->rx_recycle) < rx_queue->rx_ring_size &&
 				skb_recycle_check(skb, priv->rx_buffer_size +
 					RXBUF_ALIGNMENT))
 			__skb_queue_head(&priv->rx_recycle, skb);
 		else
 			dev_kfree_skb_any(skb);
 
-		priv->tx_skbuff[skb_dirtytx] = NULL;
+		tx_queue->tx_skbuff[skb_dirtytx] = NULL;
 
 		skb_dirtytx = (skb_dirtytx + 1) &
 			TX_RING_MOD_MASK(tx_ring_size);
 
 		howmany++;
-		priv->num_txbdfree += frags + 1;
+		spin_lock_irqsave(&tx_queue->txlock, flags);
+		tx_queue->num_txbdfree += frags + 1;
+		spin_unlock_irqrestore(&tx_queue->txlock, flags);
 	}
 
 	/* If we freed a buffer, we can restart transmission, if necessary */
-	if (netif_queue_stopped(dev) && priv->num_txbdfree)
-		netif_wake_queue(dev);
+	if (__netif_subqueue_stopped(dev, tx_queue->qindex) && tx_queue->num_txbdfree)
+		netif_wake_subqueue(dev, tx_queue->qindex);
 
 	/* Update dirty indicators */
-	priv->skb_dirtytx = skb_dirtytx;
-	priv->dirty_tx = bdp;
+	tx_queue->skb_dirtytx = skb_dirtytx;
+	tx_queue->dirty_tx = bdp;
 
 	dev->stats.tx_packets += howmany;
 
 	return howmany;
 }
 
-static void gfar_schedule_cleanup(struct net_device *dev)
+static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp)
 {
-	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->txlock, flags);
-	spin_lock(&priv->rxlock);
-
-	if (napi_schedule_prep(&priv->napi)) {
-		gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
-		__napi_schedule(&priv->napi);
+	spin_lock_irqsave(&gfargrp->grplock, flags);
+	if (napi_schedule_prep(&gfargrp->napi)) {
+		gfar_write(&gfargrp->regs->imask, IMASK_RTX_DISABLED);
+		__napi_schedule(&gfargrp->napi);
 	} else {
 		/*
 		 * Clear IEVENT, so interrupts aren't called again
 		 * because of the packets that have already arrived.
 		 */
-		gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
+		gfar_write(&gfargrp->regs->ievent, IEVENT_RTX_MASK);
 	}
+	spin_unlock_irqrestore(&gfargrp->grplock, flags);
 
-	spin_unlock(&priv->rxlock);
-	spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Interrupt Handler for Transmit complete */
-static irqreturn_t gfar_transmit(int irq, void *dev_id)
+static irqreturn_t gfar_transmit(int irq, void *grp_id)
 {
-	gfar_schedule_cleanup((struct net_device *)dev_id);
+	gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
 	return IRQ_HANDLED;
 }
 
-static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
+static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
 		struct sk_buff *skb)
 {
+	struct net_device *dev = rx_queue->dev;
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 lstatus;
+	dma_addr_t buf;
 
-	bdp->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
-			priv->rx_buffer_size, DMA_FROM_DEVICE);
-
-	lstatus = BD_LFLAG(RXBD_EMPTY | RXBD_INTERRUPT);
-
-	if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1)
-		lstatus |= BD_LFLAG(RXBD_WRAP);
-
-	eieio();
-
-	bdp->lstatus = lstatus;
+	buf = dma_map_single(&priv->ofdev->dev, skb->data,
+			     priv->rx_buffer_size, DMA_FROM_DEVICE);
+	gfar_init_rxbdp(rx_queue, bdp, buf);
 }
 
 
@@ -1760,9 +2402,9 @@
 	}
 }
 
-irqreturn_t gfar_receive(int irq, void *dev_id)
+irqreturn_t gfar_receive(int irq, void *grp_id)
 {
-	gfar_schedule_cleanup((struct net_device *)dev_id);
+	gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
 	return IRQ_HANDLED;
 }
 
@@ -1792,6 +2434,7 @@
 	fcb = (struct rxfcb *)skb->data;
 
 	/* Remove the FCB from the skb */
+	skb_set_queue_mapping(skb, fcb->rq);
 	/* Remove the padded bytes, if there are any */
 	if (amount_pull)
 		skb_pull(skb, amount_pull);
@@ -1818,8 +2461,9 @@
  *   until the budget/quota has been reached. Returns the number
  *   of frames handled
  */
-int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
+int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
 {
+	struct net_device *dev = rx_queue->dev;
 	struct rxbd8 *bdp, *base;
 	struct sk_buff *skb;
 	int pkt_len;
@@ -1828,8 +2472,8 @@
 	struct gfar_private *priv = netdev_priv(dev);
 
 	/* Get the first full descriptor */
-	bdp = priv->cur_rx;
-	base = priv->rx_bd_base;
+	bdp = rx_queue->cur_rx;
+	base = rx_queue->rx_bd_base;
 
 	amount_pull = (gfar_uses_fcb(priv) ? GMAC_FCB_LEN : 0) +
 		priv->padding;
@@ -1841,7 +2485,7 @@
 		/* Add another skb for the future */
 		newskb = gfar_new_skb(dev);
 
-		skb = priv->rx_skbuff[priv->skb_currx];
+		skb = rx_queue->rx_skbuff[rx_queue->skb_currx];
 
 		dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
 				priv->rx_buffer_size, DMA_FROM_DEVICE);
@@ -1875,8 +2519,6 @@
 				skb_put(skb, pkt_len);
 				dev->stats.rx_bytes += pkt_len;
 
-				if (in_irq() || irqs_disabled())
-					printk("Interrupt problem!\n");
 				gfar_process_frame(dev, skb, amount_pull);
 
 			} else {
@@ -1889,46 +2531,70 @@
 
 		}
 
-		priv->rx_skbuff[priv->skb_currx] = newskb;
+		rx_queue->rx_skbuff[rx_queue->skb_currx] = newskb;
 
 		/* Setup the new bdp */
-		gfar_new_rxbdp(dev, bdp, newskb);
+		gfar_new_rxbdp(rx_queue, bdp, newskb);
 
 		/* Update to the next pointer */
-		bdp = next_bd(bdp, base, priv->rx_ring_size);
+		bdp = next_bd(bdp, base, rx_queue->rx_ring_size);
 
 		/* update to point at the next skb */
-		priv->skb_currx =
-		    (priv->skb_currx + 1) &
-		    RX_RING_MOD_MASK(priv->rx_ring_size);
+		rx_queue->skb_currx =
+		    (rx_queue->skb_currx + 1) &
+		    RX_RING_MOD_MASK(rx_queue->rx_ring_size);
 	}
 
 	/* Update the current rxbd pointer to be the next one */
-	priv->cur_rx = bdp;
+	rx_queue->cur_rx = bdp;
 
 	return howmany;
 }
 
 static int gfar_poll(struct napi_struct *napi, int budget)
 {
-	struct gfar_private *priv = container_of(napi, struct gfar_private, napi);
-	struct net_device *dev = priv->ndev;
-	int tx_cleaned = 0;
-	int rx_cleaned = 0;
-	unsigned long flags;
+	struct gfar_priv_grp *gfargrp = container_of(napi,
+			struct gfar_priv_grp, napi);
+	struct gfar_private *priv = gfargrp->priv;
+	struct gfar __iomem *regs = gfargrp->regs;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	int rx_cleaned = 0, budget_per_queue = 0, rx_cleaned_per_queue = 0;
+	int tx_cleaned = 0, i, left_over_budget = budget;
+	unsigned long serviced_queues = 0;
+	int num_queues = 0;
+
+	num_queues = gfargrp->num_rx_queues;
+	budget_per_queue = budget/num_queues;
 
 	/* Clear IEVENT, so interrupts aren't called again
 	 * because of the packets that have already arrived */
-	gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
+	gfar_write(&regs->ievent, IEVENT_RTX_MASK);
 
-	/* If we fail to get the lock, don't bother with the TX BDs */
-	if (spin_trylock_irqsave(&priv->txlock, flags)) {
-		tx_cleaned = gfar_clean_tx_ring(dev);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+	while (num_queues && left_over_budget) {
+
+		budget_per_queue = left_over_budget/num_queues;
+		left_over_budget = 0;
+
+		for_each_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
+			if (test_bit(i, &serviced_queues))
+				continue;
+			rx_queue = priv->rx_queue[i];
+			tx_queue = priv->tx_queue[rx_queue->qindex];
+
+			tx_cleaned += gfar_clean_tx_ring(tx_queue);
+			rx_cleaned_per_queue = gfar_clean_rx_ring(rx_queue,
+							budget_per_queue);
+			rx_cleaned += rx_cleaned_per_queue;
+			if(rx_cleaned_per_queue < budget_per_queue) {
+				left_over_budget = left_over_budget +
+					(budget_per_queue - rx_cleaned_per_queue);
+				set_bit(i, &serviced_queues);
+				num_queues--;
+			}
+		}
 	}
 
-	rx_cleaned = gfar_clean_rx_ring(dev, budget);
-
 	if (tx_cleaned)
 		return budget;
 
@@ -1936,20 +2602,14 @@
 		napi_complete(napi);
 
 		/* Clear the halt bit in RSTAT */
-		gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
+		gfar_write(&regs->rstat, gfargrp->rstat);
 
-		gfar_write(&priv->regs->imask, IMASK_DEFAULT);
+		gfar_write(&regs->imask, IMASK_DEFAULT);
 
 		/* If we are coalescing interrupts, update the timer */
 		/* Otherwise, clear it */
-		if (likely(priv->rxcoalescing)) {
-			gfar_write(&priv->regs->rxic, 0);
-			gfar_write(&priv->regs->rxic, priv->rxic);
-		}
-		if (likely(priv->txcoalescing)) {
-			gfar_write(&priv->regs->txic, 0);
-			gfar_write(&priv->regs->txic, priv->txic);
-		}
+		gfar_configure_coalescing(priv,
+				gfargrp->rx_bit_map, gfargrp->tx_bit_map);
 	}
 
 	return rx_cleaned;
@@ -1964,44 +2624,49 @@
 static void gfar_netpoll(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	int i = 0;
 
 	/* If the device has multiple interrupts, run tx/rx */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		disable_irq(priv->interruptTransmit);
-		disable_irq(priv->interruptReceive);
-		disable_irq(priv->interruptError);
-		gfar_interrupt(priv->interruptTransmit, dev);
-		enable_irq(priv->interruptError);
-		enable_irq(priv->interruptReceive);
-		enable_irq(priv->interruptTransmit);
+		for (i = 0; i < priv->num_grps; i++) {
+			disable_irq(priv->gfargrp[i].interruptTransmit);
+			disable_irq(priv->gfargrp[i].interruptReceive);
+			disable_irq(priv->gfargrp[i].interruptError);
+			gfar_interrupt(priv->gfargrp[i].interruptTransmit,
+						&priv->gfargrp[i]);
+			enable_irq(priv->gfargrp[i].interruptError);
+			enable_irq(priv->gfargrp[i].interruptReceive);
+			enable_irq(priv->gfargrp[i].interruptTransmit);
+		}
 	} else {
-		disable_irq(priv->interruptTransmit);
-		gfar_interrupt(priv->interruptTransmit, dev);
-		enable_irq(priv->interruptTransmit);
+		for (i = 0; i < priv->num_grps; i++) {
+			disable_irq(priv->gfargrp[i].interruptTransmit);
+			gfar_interrupt(priv->gfargrp[i].interruptTransmit,
+						&priv->gfargrp[i]);
+			enable_irq(priv->gfargrp[i].interruptTransmit);
 	}
 }
 #endif
 
 /* The interrupt handler for devices with one interrupt */
-static irqreturn_t gfar_interrupt(int irq, void *dev_id)
+static irqreturn_t gfar_interrupt(int irq, void *grp_id)
 {
-	struct net_device *dev = dev_id;
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_grp *gfargrp = grp_id;
 
 	/* Save ievent for future reference */
-	u32 events = gfar_read(&priv->regs->ievent);
+	u32 events = gfar_read(&gfargrp->regs->ievent);
 
 	/* Check for reception */
 	if (events & IEVENT_RX_MASK)
-		gfar_receive(irq, dev_id);
+		gfar_receive(irq, grp_id);
 
 	/* Check for transmit completion */
 	if (events & IEVENT_TX_MASK)
-		gfar_transmit(irq, dev_id);
+		gfar_transmit(irq, grp_id);
 
 	/* Check for errors */
 	if (events & IEVENT_ERR_MASK)
-		gfar_error(irq, dev_id);
+		gfar_error(irq, grp_id);
 
 	return IRQ_HANDLED;
 }
@@ -2015,12 +2680,14 @@
 static void adjust_link(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned long flags;
 	struct phy_device *phydev = priv->phydev;
 	int new_state = 0;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
+
 	if (phydev->link) {
 		u32 tempval = gfar_read(&regs->maccfg2);
 		u32 ecntrl = gfar_read(&regs->ecntrl);
@@ -2085,8 +2752,8 @@
 
 	if (new_state && netif_msg_link(priv))
 		phy_print_status(phydev);
-
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 }
 
 /* Update the hash table based on the current list of multicast
@@ -2097,10 +2764,10 @@
 {
 	struct dev_mc_list *mc_ptr;
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 
-	if(dev->flags & IFF_PROMISC) {
+	if (dev->flags & IFF_PROMISC) {
 		/* Set RCTRL to PROM */
 		tempval = gfar_read(&regs->rctrl);
 		tempval |= RCTRL_PROM;
@@ -2112,7 +2779,7 @@
 		gfar_write(&regs->rctrl, tempval);
 	}
 
-	if(dev->flags & IFF_ALLMULTI) {
+	if (dev->flags & IFF_ALLMULTI) {
 		/* Set the hash to rx all multicast frames */
 		gfar_write(&regs->igaddr0, 0xffffffff);
 		gfar_write(&regs->igaddr1, 0xffffffff);
@@ -2164,7 +2831,7 @@
 			em_num = 0;
 		}
 
-		if(dev->mc_count == 0)
+		if (dev->mc_count == 0)
 			return;
 
 		/* Parse the list, and set the appropriate bits */
@@ -2230,10 +2897,11 @@
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	int idx;
 	char tmpbuf[MAC_ADDR_LEN];
 	u32 tempval;
-	u32 __iomem *macptr = &priv->regs->macstnaddr1;
+	u32 __iomem *macptr = &regs->macstnaddr1;
 
 	macptr += num*2;
 
@@ -2250,16 +2918,18 @@
 }
 
 /* GFAR error interrupt handler */
-static irqreturn_t gfar_error(int irq, void *dev_id)
+static irqreturn_t gfar_error(int irq, void *grp_id)
 {
-	struct net_device *dev = dev_id;
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_grp *gfargrp = grp_id;
+	struct gfar __iomem *regs = gfargrp->regs;
+	struct gfar_private *priv= gfargrp->priv;
+	struct net_device *dev = priv->ndev;
 
 	/* Save ievent for future reference */
-	u32 events = gfar_read(&priv->regs->ievent);
+	u32 events = gfar_read(&regs->ievent);
 
 	/* Clear IEVENT */
-	gfar_write(&priv->regs->ievent, events & IEVENT_ERR_MASK);
+	gfar_write(&regs->ievent, events & IEVENT_ERR_MASK);
 
 	/* Magic Packet is not an error. */
 	if ((priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
@@ -2269,7 +2939,7 @@
 	/* Hmm... */
 	if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
 		printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
-		       dev->name, events, gfar_read(&priv->regs->imask));
+		       dev->name, events, gfar_read(&regs->imask));
 
 	/* Update the error counters */
 	if (events & IEVENT_TXE) {
@@ -2280,14 +2950,22 @@
 		if (events & IEVENT_CRL)
 			dev->stats.tx_aborted_errors++;
 		if (events & IEVENT_XFUN) {
+			unsigned long flags;
+
 			if (netif_msg_tx_err(priv))
 				printk(KERN_DEBUG "%s: TX FIFO underrun, "
 				       "packet dropped.\n", dev->name);
 			dev->stats.tx_dropped++;
 			priv->extra_stats.tx_underrun++;
 
+			local_irq_save(flags);
+			lock_tx_qs(priv);
+
 			/* Reactivate the Tx Queues */
-			gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
+			gfar_write(&regs->tstat, gfargrp->tstat);
+
+			unlock_tx_qs(priv);
+			local_irq_restore(flags);
 		}
 		if (netif_msg_tx_err(priv))
 			printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
@@ -2296,11 +2974,11 @@
 		dev->stats.rx_errors++;
 		priv->extra_stats.rx_bsy++;
 
-		gfar_receive(irq, dev_id);
+		gfar_receive(irq, grp_id);
 
 		if (netif_msg_rx_err(priv))
 			printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
-			       dev->name, gfar_read(&priv->regs->rstat));
+			       dev->name, gfar_read(&regs->rstat));
 	}
 	if (events & IEVENT_BABR) {
 		dev->stats.rx_errors++;
@@ -2331,6 +3009,9 @@
 		.type = "network",
 		.compatible = "gianfar",
 	},
+	{
+		.compatible = "fsl,etsec2",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, gfar_match);
@@ -2342,8 +3023,9 @@
 
 	.probe = gfar_probe,
 	.remove = gfar_remove,
-	.suspend = gfar_suspend,
-	.resume = gfar_resume,
+	.suspend = gfar_legacy_suspend,
+	.resume = gfar_legacy_resume,
+	.driver.pm = GFAR_PM_OPS,
 };
 
 static int __init gfar_init(void)
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 2cd9433..cbb4510 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -7,8 +7,9 @@
  *
  * Author: Andy Fleming
  * Maintainer: Kumar Gala
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -74,6 +75,13 @@
 extern const char gfar_driver_name[];
 extern const char gfar_driver_version[];
 
+/* MAXIMUM NUMBER OF QUEUES SUPPORTED */
+#define MAX_TX_QS	0x8
+#define MAX_RX_QS	0x8
+
+/* MAXIMUM NUMBER OF GROUPS SUPPORTED */
+#define MAXGROUPS 0x2
+
 /* These need to be powers of 2 for this driver */
 #define DEFAULT_TX_RING_SIZE	256
 #define DEFAULT_RX_RING_SIZE	256
@@ -171,12 +179,63 @@
 
 #define MINFLR_INIT_SETTINGS	0x00000040
 
+/* Tqueue control */
+#define TQUEUE_EN0		0x00008000
+#define TQUEUE_EN1		0x00004000
+#define TQUEUE_EN2		0x00002000
+#define TQUEUE_EN3		0x00001000
+#define TQUEUE_EN4		0x00000800
+#define TQUEUE_EN5		0x00000400
+#define TQUEUE_EN6		0x00000200
+#define TQUEUE_EN7		0x00000100
+#define TQUEUE_EN_ALL		0x0000FF00
+
+#define TR03WT_WT0_MASK		0xFF000000
+#define TR03WT_WT1_MASK		0x00FF0000
+#define TR03WT_WT2_MASK		0x0000FF00
+#define TR03WT_WT3_MASK		0x000000FF
+
+#define TR47WT_WT4_MASK		0xFF000000
+#define TR47WT_WT5_MASK		0x00FF0000
+#define TR47WT_WT6_MASK		0x0000FF00
+#define TR47WT_WT7_MASK		0x000000FF
+
+/* Rqueue control */
+#define RQUEUE_EX0		0x00800000
+#define RQUEUE_EX1		0x00400000
+#define RQUEUE_EX2		0x00200000
+#define RQUEUE_EX3		0x00100000
+#define RQUEUE_EX4		0x00080000
+#define RQUEUE_EX5		0x00040000
+#define RQUEUE_EX6		0x00020000
+#define RQUEUE_EX7		0x00010000
+#define RQUEUE_EX_ALL		0x00FF0000
+
+#define RQUEUE_EN0		0x00000080
+#define RQUEUE_EN1		0x00000040
+#define RQUEUE_EN2		0x00000020
+#define RQUEUE_EN3		0x00000010
+#define RQUEUE_EN4		0x00000008
+#define RQUEUE_EN5		0x00000004
+#define RQUEUE_EN6		0x00000002
+#define RQUEUE_EN7		0x00000001
+#define RQUEUE_EN_ALL		0x000000FF
+
 /* Init to do tx snooping for buffers and descriptors */
 #define DMACTRL_INIT_SETTINGS   0x000000c3
 #define DMACTRL_GRS             0x00000010
 #define DMACTRL_GTS             0x00000008
 
-#define TSTAT_CLEAR_THALT       0x80000000
+#define TSTAT_CLEAR_THALT_ALL	0xFF000000
+#define TSTAT_CLEAR_THALT	0x80000000
+#define TSTAT_CLEAR_THALT0	0x80000000
+#define TSTAT_CLEAR_THALT1	0x40000000
+#define TSTAT_CLEAR_THALT2	0x20000000
+#define TSTAT_CLEAR_THALT3	0x10000000
+#define TSTAT_CLEAR_THALT4	0x08000000
+#define TSTAT_CLEAR_THALT5	0x04000000
+#define TSTAT_CLEAR_THALT6	0x02000000
+#define TSTAT_CLEAR_THALT7	0x01000000
 
 /* Interrupt coalescing macros */
 #define IC_ICEN			0x80000000
@@ -227,6 +286,13 @@
 #define TCTRL_IPCSEN		0x00004000
 #define TCTRL_TUCSEN		0x00002000
 #define TCTRL_VLINS		0x00001000
+#define TCTRL_THDF		0x00000800
+#define TCTRL_RFCPAUSE		0x00000010
+#define TCTRL_TFCPAUSE		0x00000008
+#define TCTRL_TXSCHED_MASK	0x00000006
+#define TCTRL_TXSCHED_INIT	0x00000000
+#define TCTRL_TXSCHED_PRIO	0x00000002
+#define TCTRL_TXSCHED_WRRS	0x00000004
 #define TCTRL_INIT_CSUM		(TCTRL_TUCSEN | TCTRL_IPCSEN)
 
 #define IEVENT_INIT_CLEAR	0xffffffff
@@ -315,6 +381,84 @@
 #define BD_LFLAG(flags) ((flags) << 16)
 #define BD_LENGTH_MASK		0x0000ffff
 
+#define CLASS_CODE_UNRECOG		0x00
+#define CLASS_CODE_DUMMY1		0x01
+#define CLASS_CODE_ETHERTYPE1		0x02
+#define CLASS_CODE_ETHERTYPE2		0x03
+#define CLASS_CODE_USER_PROG1		0x04
+#define CLASS_CODE_USER_PROG2		0x05
+#define CLASS_CODE_USER_PROG3		0x06
+#define CLASS_CODE_USER_PROG4		0x07
+#define CLASS_CODE_TCP_IPV4		0x08
+#define CLASS_CODE_UDP_IPV4		0x09
+#define CLASS_CODE_AH_ESP_IPV4		0x0a
+#define CLASS_CODE_SCTP_IPV4		0x0b
+#define CLASS_CODE_TCP_IPV6		0x0c
+#define CLASS_CODE_UDP_IPV6		0x0d
+#define CLASS_CODE_AH_ESP_IPV6		0x0e
+#define CLASS_CODE_SCTP_IPV6		0x0f
+
+#define FPR_FILER_MASK	0xFFFFFFFF
+#define MAX_FILER_IDX	0xFF
+
+/* RQFCR register bits */
+#define RQFCR_GPI		0x80000000
+#define RQFCR_HASHTBL_Q		0x00000000
+#define RQFCR_HASHTBL_0		0x00020000
+#define RQFCR_HASHTBL_1		0x00040000
+#define RQFCR_HASHTBL_2		0x00060000
+#define RQFCR_HASHTBL_3		0x00080000
+#define RQFCR_HASH		0x00010000
+#define RQFCR_CLE		0x00000200
+#define RQFCR_RJE		0x00000100
+#define RQFCR_AND		0x00000080
+#define RQFCR_CMP_EXACT		0x00000000
+#define RQFCR_CMP_MATCH		0x00000020
+#define RQFCR_CMP_NOEXACT	0x00000040
+#define RQFCR_CMP_NOMATCH	0x00000060
+
+/* RQFCR PID values */
+#define	RQFCR_PID_MASK		0x00000000
+#define	RQFCR_PID_PARSE		0x00000001
+#define	RQFCR_PID_ARB		0x00000002
+#define	RQFCR_PID_DAH		0x00000003
+#define	RQFCR_PID_DAL		0x00000004
+#define	RQFCR_PID_SAH		0x00000005
+#define	RQFCR_PID_SAL		0x00000006
+#define	RQFCR_PID_ETY		0x00000007
+#define	RQFCR_PID_VID		0x00000008
+#define	RQFCR_PID_PRI		0x00000009
+#define	RQFCR_PID_TOS		0x0000000A
+#define	RQFCR_PID_L4P		0x0000000B
+#define	RQFCR_PID_DIA		0x0000000C
+#define	RQFCR_PID_SIA		0x0000000D
+#define	RQFCR_PID_DPT		0x0000000E
+#define	RQFCR_PID_SPT		0x0000000F
+
+/* RQFPR when PID is 0x0001 */
+#define RQFPR_HDR_GE_512	0x00200000
+#define RQFPR_LERR		0x00100000
+#define RQFPR_RAR		0x00080000
+#define RQFPR_RARQ		0x00040000
+#define RQFPR_AR		0x00020000
+#define RQFPR_ARQ		0x00010000
+#define RQFPR_EBC		0x00008000
+#define RQFPR_VLN		0x00004000
+#define RQFPR_CFI		0x00002000
+#define RQFPR_JUM		0x00001000
+#define RQFPR_IPF		0x00000800
+#define RQFPR_FIF		0x00000400
+#define RQFPR_IPV4		0x00000200
+#define RQFPR_IPV6		0x00000100
+#define RQFPR_ICC		0x00000080
+#define RQFPR_ICV		0x00000040
+#define RQFPR_TCP		0x00000020
+#define RQFPR_UDP		0x00000010
+#define RQFPR_TUC		0x00000008
+#define RQFPR_TUV		0x00000004
+#define RQFPR_PER		0x00000002
+#define RQFPR_EER		0x00000001
+
 /* TxBD status field bits */
 #define TXBD_READY		0x8000
 #define TXBD_PADCRC		0x4000
@@ -503,25 +647,32 @@
 
 struct gfar {
 	u32	tsec_id;	/* 0x.000 - Controller ID register */
-	u8	res1[12];
+	u32	tsec_id2;	/* 0x.004 - Controller ID2 register */
+	u8	res1[8];
 	u32	ievent;		/* 0x.010 - Interrupt Event Register */
 	u32	imask;		/* 0x.014 - Interrupt Mask Register */
 	u32	edis;		/* 0x.018 - Error Disabled Register */
-	u8	res2[4];
+	u32	emapg;		/* 0x.01c - Group Error mapping register */
 	u32	ecntrl;		/* 0x.020 - Ethernet Control Register */
 	u32	minflr;		/* 0x.024 - Minimum Frame Length Register */
 	u32	ptv;		/* 0x.028 - Pause Time Value Register */
 	u32	dmactrl;	/* 0x.02c - DMA Control Register */
 	u32	tbipa;		/* 0x.030 - TBI PHY Address Register */
-	u8	res3[88];
+	u8	res2[28];
+	u32	fifo_rx_pause;	/* 0x.050 - FIFO receive pause start threshold
+					register */
+	u32	fifo_rx_pause_shutoff;	/* x.054 - FIFO receive starve shutoff
+						register */
+	u32	fifo_rx_alarm;	/* 0x.058 - FIFO receive alarm start threshold
+						register */
+	u32	fifo_rx_alarm_shutoff;	/*0x.05c - FIFO receive alarm  starve
+						shutoff register */
+	u8	res3[44];
 	u32	fifo_tx_thr;	/* 0x.08c - FIFO transmit threshold register */
 	u8	res4[8];
 	u32	fifo_tx_starve;	/* 0x.098 - FIFO transmit starve register */
 	u32	fifo_tx_starve_shutoff;	/* 0x.09c - FIFO transmit starve shutoff register */
-	u8	res5[4];
-	u32	fifo_rx_pause;	/* 0x.0a4 - FIFO receive pause threshold register */
-	u32	fifo_rx_alarm;	/* 0x.0a8 - FIFO receive alarm threshold register */
-	u8	res6[84];
+	u8	res5[96];
 	u32	tctrl;		/* 0x.100 - Transmit Control Register */
 	u32	tstat;		/* 0x.104 - Transmit Status Register */
 	u32	dfvlan;		/* 0x.108 - Default VLAN Control word */
@@ -572,7 +723,11 @@
 	u8	res12[8];
 	u32	rxic;		/* 0x.310 - Receive Interrupt Coalescing Configuration Register */
 	u32	rqueue;		/* 0x.314 - Receive queue control register */
-	u8	res13[24];
+	u32	rir0;		/* 0x.318 - Ring mapping register 0 */
+	u32	rir1;		/* 0x.31c - Ring mapping register 1 */
+	u32	rir2;		/* 0x.320 - Ring mapping register 2 */
+	u32	rir3;		/* 0x.324 - Ring mapping register 3 */
+	u8	res13[8];
 	u32	rbifx;		/* 0x.330 - Receive bit field extract control register */
 	u32	rqfar;		/* 0x.334 - Receive queue filing table address register */
 	u32	rqfcr;		/* 0x.338 - Receive queue filing table control register */
@@ -621,7 +776,7 @@
 	u32	maxfrm;		/* 0x.510 - Maximum Frame Length Register */
 	u8	res18[12];
 	u8	gfar_mii_regs[24];	/* See gianfar_phy.h */
-	u8	res19[4];
+	u32	ifctrl;		/* 0x.538 - Interface control register */
 	u32	ifstat;		/* 0x.53c - Interface Status Register */
 	u32	macstnaddr1;	/* 0x.540 - Station Address Part 1 Register */
 	u32	macstnaddr2;	/* 0x.544 - Station Address Part 2 Register */
@@ -682,8 +837,30 @@
 	u8	res23c[248];
 	u32	attr;		/* 0x.bf8 - Attributes Register */
 	u32	attreli;	/* 0x.bfc - Attributes Extract Length and Extract Index Register */
-	u8	res24[1024];
-
+	u8	res24[688];
+	u32	isrg0;		/* 0x.eb0 - Interrupt steering group 0 register */
+	u32	isrg1;		/* 0x.eb4 - Interrupt steering group 1 register */
+	u32	isrg2;		/* 0x.eb8 - Interrupt steering group 2 register */
+	u32	isrg3;		/* 0x.ebc - Interrupt steering group 3 register */
+	u8	res25[16];
+	u32	rxic0;		/* 0x.ed0 - Ring 0 Rx interrupt coalescing */
+	u32	rxic1;		/* 0x.ed4 - Ring 1 Rx interrupt coalescing */
+	u32	rxic2;		/* 0x.ed8 - Ring 2 Rx interrupt coalescing */
+	u32	rxic3;		/* 0x.edc - Ring 3 Rx interrupt coalescing */
+	u32	rxic4;		/* 0x.ee0 - Ring 4 Rx interrupt coalescing */
+	u32	rxic5;		/* 0x.ee4 - Ring 5 Rx interrupt coalescing */
+	u32	rxic6;		/* 0x.ee8 - Ring 6 Rx interrupt coalescing */
+	u32	rxic7;		/* 0x.eec - Ring 7 Rx interrupt coalescing */
+	u8	res26[32];
+	u32	txic0;		/* 0x.f10 - Ring 0 Tx interrupt coalescing */
+	u32	txic1;		/* 0x.f14 - Ring 1 Tx interrupt coalescing */
+	u32	txic2;		/* 0x.f18 - Ring 2 Tx interrupt coalescing */
+	u32	txic3;		/* 0x.f1c - Ring 3 Tx interrupt coalescing */
+	u32	txic4;		/* 0x.f20 - Ring 4 Tx interrupt coalescing */
+	u32	txic5;		/* 0x.f24 - Ring 5 Tx interrupt coalescing */
+	u32	txic6;		/* 0x.f28 - Ring 6 Tx interrupt coalescing */
+	u32	txic7;		/* 0x.f2c - Ring 7 Tx interrupt coalescing */
+	u8	res27[208];
 };
 
 /* Flags related to gianfar device features */
@@ -699,6 +876,133 @@
 #define FSL_GIANFAR_DEV_HAS_BD_STASHING		0x00000200
 #define FSL_GIANFAR_DEV_HAS_BUF_STASHING	0x00000400
 
+#if (MAXGROUPS == 2)
+#define DEFAULT_MAPPING 	0xAA
+#else
+#define DEFAULT_MAPPING 	0xFF
+#endif
+
+#define ISRG_SHIFT_TX	0x10
+#define ISRG_SHIFT_RX	0x18
+
+/* The same driver can operate in two modes */
+/* SQ_SG_MODE: Single Queue Single Group Mode
+ * 		(Backward compatible mode)
+ * MQ_MG_MODE: Multi Queue Multi Group mode
+ */
+enum {
+	SQ_SG_MODE = 0,
+	MQ_MG_MODE
+};
+
+/**
+ *	struct gfar_priv_tx_q - per tx queue structure
+ *	@txlock: per queue tx spin lock
+ *	@tx_skbuff:skb pointers
+ *	@skb_curtx: to be used skb pointer
+ *	@skb_dirtytx:the last used skb pointer
+ *	@qindex: index of this queue
+ *	@dev: back pointer to the dev structure
+ *	@grp: back pointer to the group to which this queue belongs
+ *	@tx_bd_base: First tx buffer descriptor
+ *	@cur_tx: Next free ring entry
+ *	@dirty_tx: First buffer in line to be transmitted
+ *	@tx_ring_size: Tx ring size
+ *	@num_txbdfree: number of free TxBds
+ *	@txcoalescing: enable/disable tx coalescing
+ *	@txic: transmit interrupt coalescing value
+ *	@txcount: coalescing value if based on tx frame count
+ *	@txtime: coalescing value if based on time
+ */
+struct gfar_priv_tx_q {
+	spinlock_t txlock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	struct sk_buff ** tx_skbuff;
+	/* Buffer descriptor pointers */
+	dma_addr_t tx_bd_dma_base;
+	struct	txbd8 *tx_bd_base;
+	struct	txbd8 *cur_tx;
+	struct	txbd8 *dirty_tx;
+	struct	net_device *dev;
+	struct gfar_priv_grp *grp;
+	u16	skb_curtx;
+	u16	skb_dirtytx;
+	u16	qindex;
+	unsigned int tx_ring_size;
+	unsigned int num_txbdfree;
+	/* Configuration info for the coalescing features */
+	unsigned char txcoalescing;
+	unsigned long txic;
+	unsigned short txcount;
+	unsigned short txtime;
+};
+
+/**
+ *	struct gfar_priv_rx_q - per rx queue structure
+ *	@rxlock: per queue rx spin lock
+ *	@rx_skbuff: skb pointers
+ *	@skb_currx: currently use skb pointer
+ *	@rx_bd_base: First rx buffer descriptor
+ *	@cur_rx: Next free rx ring entry
+ *	@qindex: index of this queue
+ *	@dev: back pointer to the dev structure
+ *	@rx_ring_size: Rx ring size
+ *	@rxcoalescing: enable/disable rx-coalescing
+ *	@rxic: receive interrupt coalescing vlaue
+ */
+
+struct gfar_priv_rx_q {
+	spinlock_t rxlock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	struct	sk_buff ** rx_skbuff;
+	dma_addr_t rx_bd_dma_base;
+	struct	rxbd8 *rx_bd_base;
+	struct	rxbd8 *cur_rx;
+	struct	net_device *dev;
+	struct gfar_priv_grp *grp;
+	u16	skb_currx;
+	u16	qindex;
+	unsigned int	rx_ring_size;
+	/* RX Coalescing values */
+	unsigned char rxcoalescing;
+	unsigned long rxic;
+};
+
+/**
+ *	struct gfar_priv_grp - per group structure
+ *	@napi: the napi poll function
+ *	@priv: back pointer to the priv structure
+ *	@regs: the ioremapped register space for this group
+ *	@grp_id: group id for this group
+ *	@interruptTransmit: The TX interrupt number for this group
+ *	@interruptReceive: The RX interrupt number for this group
+ *	@interruptError: The ERROR interrupt number for this group
+ *	@int_name_tx: tx interrupt name for this group
+ *	@int_name_rx: rx interrupt name for this group
+ *	@int_name_er: er interrupt name for this group
+ */
+
+struct gfar_priv_grp {
+	spinlock_t grplock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	struct	napi_struct napi;
+	struct gfar_private *priv;
+	struct gfar __iomem *regs;
+	unsigned int grp_id;
+	unsigned long rx_bit_map;
+	unsigned long tx_bit_map;
+	unsigned long num_tx_queues;
+	unsigned long num_rx_queues;
+	unsigned int rstat;
+	unsigned int tstat;
+	unsigned int imask;
+	unsigned int ievent;
+	unsigned int interruptTransmit;
+	unsigned int interruptReceive;
+	unsigned int interruptError;
+
+	char int_name_tx[GFAR_INT_NAME_MAX];
+	char int_name_rx[GFAR_INT_NAME_MAX];
+	char int_name_er[GFAR_INT_NAME_MAX];
+};
+
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source
  * (Ok, that's not so true anymore, but there is a family resemblence)
  * The GFAR buffer descriptors track the ring buffers.  The rx_bd_base
@@ -709,62 +1013,36 @@
  * the buffer descriptor determines the actual condition.
  */
 struct gfar_private {
-	/* Fields controlled by TX lock */
-	spinlock_t txlock;
 
-	/* Pointer to the array of skbuffs */
-	struct sk_buff ** tx_skbuff;
+	/* Indicates how many tx, rx queues are enabled */
+	unsigned int num_tx_queues;
+	unsigned int num_rx_queues;
+	unsigned int num_grps;
+	unsigned int mode;
 
-	/* next free skb in the array */
-	u16 skb_curtx;
-
-	/* First skb in line to be transmitted */
-	u16 skb_dirtytx;
-
-	/* Configuration info for the coalescing features */
-	unsigned char txcoalescing;
-	unsigned long txic;
-
-	/* Buffer descriptor pointers */
-	struct txbd8 *tx_bd_base;	/* First tx buffer descriptor */
-	struct txbd8 *cur_tx;	        /* Next free ring entry */
-	struct txbd8 *dirty_tx;		/* First buffer in line
-					   to be transmitted */
-	unsigned int tx_ring_size;
-	unsigned int num_txbdfree;	/* number of TxBDs free */
-
-	/* RX Locked fields */
-	spinlock_t rxlock;
+	/* The total tx and rx ring size for the enabled queues */
+	unsigned int total_tx_ring_size;
+	unsigned int total_rx_ring_size;
 
 	struct device_node *node;
 	struct net_device *ndev;
 	struct of_device *ofdev;
-	struct napi_struct napi;
 
-	/* skb array and index */
-	struct sk_buff ** rx_skbuff;
-	u16 skb_currx;
+	struct gfar_priv_grp gfargrp[MAXGROUPS];
+	struct gfar_priv_tx_q *tx_queue[MAX_TX_QS];
+	struct gfar_priv_rx_q *rx_queue[MAX_RX_QS];
 
-	/* RX Coalescing values */
-	unsigned char rxcoalescing;
-	unsigned long rxic;
-
-	struct rxbd8 *rx_bd_base;	/* First Rx buffers */
-	struct rxbd8 *cur_rx;           /* Next free rx ring entry */
-
-	/* RX parameters */
-	unsigned int rx_ring_size;
+	/* RX per device parameters */
 	unsigned int rx_buffer_size;
 	unsigned int rx_stash_size;
 	unsigned int rx_stash_index;
 
+	u32 cur_filer_idx;
+
 	struct sk_buff_head rx_recycle;
 
 	struct vlan_group *vlgrp;
 
-	/* Unprotected fields */
-	/* Pointer to the GFAR memory mapped Registers */
-	struct gfar __iomem *regs;
 
 	/* Hash registers and their width */
 	u32 __iomem *hash_regs[16];
@@ -785,13 +1063,10 @@
 	unsigned char rx_csum_enable:1,
 		extended_hash:1,
 		bd_stash_en:1,
+		rx_filer_enable:1,
 		wol_en:1; /* Wake-on-LAN enabled */
 	unsigned short padding;
 
-	unsigned int interruptTransmit;
-	unsigned int interruptReceive;
-	unsigned int interruptError;
-
 	/* PHY stuff */
 	struct phy_device *phydev;
 	struct mii_bus *mii_bus;
@@ -803,14 +1078,13 @@
 
 	struct work_struct reset_task;
 
-	char int_name_tx[GFAR_INT_NAME_MAX];
-	char int_name_rx[GFAR_INT_NAME_MAX];
-	char int_name_er[GFAR_INT_NAME_MAX];
-
 	/* Network Statistics */
 	struct gfar_extra_stats extra_stats;
 };
 
+extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
+
 static inline u32 gfar_read(volatile unsigned __iomem *addr)
 {
 	u32 val;
@@ -823,12 +1097,28 @@
 	out_be32(addr, val);
 }
 
+static inline void gfar_write_filer(struct gfar_private *priv,
+		unsigned int far, unsigned int fcr, unsigned int fpr)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+
+	gfar_write(&regs->rqfar, far);
+	gfar_write(&regs->rqfcr, fcr);
+	gfar_write(&regs->rqfpr, fpr);
+}
+
+extern void lock_rx_qs(struct gfar_private *priv);
+extern void lock_tx_qs(struct gfar_private *priv);
+extern void unlock_rx_qs(struct gfar_private *priv);
+extern void unlock_tx_qs(struct gfar_private *priv);
 extern irqreturn_t gfar_receive(int irq, void *dev_id);
 extern int startup_gfar(struct net_device *dev);
 extern void stop_gfar(struct net_device *dev);
 extern void gfar_halt(struct net_device *dev);
 extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
 		int enable, u32 regnum, u32 read);
+extern void gfar_configure_coalescing(struct gfar_private *priv,
+		unsigned long tx_mask, unsigned long rx_mask);
 void gfar_init_sysfs(struct net_device *dev);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 6c144b5..1010367 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -7,8 +7,9 @@
  *
  *  Author: Andy Fleming
  *  Maintainer: Kumar Gala
+ *  Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- *  Copyright (c) 2003,2004 Freescale Semiconductor, Inc.
+ *  Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc.
  *
  *  This software may be used and distributed according to
  *  the terms of the GNU Public License, Version 2, incorporated herein
@@ -41,7 +42,7 @@
 #include "gianfar.h"
 
 extern void gfar_start(struct net_device *dev);
-extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
+extern int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
 
 #define GFAR_MAX_COAL_USECS 0xffff
 #define GFAR_MAX_COAL_FRAMES 0xff
@@ -136,10 +137,11 @@
 {
 	int i;
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u64 *extra = (u64 *) & priv->extra_stats;
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		u32 __iomem *rmon = (u32 __iomem *) & priv->regs->rmon;
+		u32 __iomem *rmon = (u32 __iomem *) &regs->rmon;
 		struct gfar_stats *stats = (struct gfar_stats *) buf;
 
 		for (i = 0; i < GFAR_RMON_LEN; i++)
@@ -197,12 +199,18 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct phy_device *phydev = priv->phydev;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	struct gfar_priv_tx_q *tx_queue = NULL;
 
 	if (NULL == phydev)
 		return -ENODEV;
+	tx_queue = priv->tx_queue[0];
+	rx_queue = priv->rx_queue[0];
 
-	cmd->maxtxpkt = get_icft_value(priv->txic);
-	cmd->maxrxpkt = get_icft_value(priv->rxic);
+	/* etsec-1.7 and older versions have only one txic
+	 * and rxic regs although they support multiple queues */
+	cmd->maxtxpkt = get_icft_value(tx_queue->txic);
+	cmd->maxrxpkt = get_icft_value(rx_queue->rxic);
 
 	return phy_ethtool_gset(phydev, cmd);
 }
@@ -218,7 +226,7 @@
 {
 	int i;
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 __iomem *theregs = (u32 __iomem *) priv->regs;
+	u32 __iomem *theregs = (u32 __iomem *) priv->gfargrp[0].regs;
 	u32 *buf = (u32 *) regbuf;
 
 	for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
@@ -279,6 +287,8 @@
 static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	struct gfar_priv_tx_q *tx_queue = NULL;
 	unsigned long rxtime;
 	unsigned long rxcount;
 	unsigned long txtime;
@@ -290,10 +300,13 @@
 	if (NULL == priv->phydev)
 		return -ENODEV;
 
-	rxtime  = get_ictt_value(priv->rxic);
-	rxcount = get_icft_value(priv->rxic);
-	txtime  = get_ictt_value(priv->txic);
-	txcount = get_icft_value(priv->txic);
+	rx_queue = priv->rx_queue[0];
+	tx_queue = priv->tx_queue[0];
+
+	rxtime  = get_ictt_value(rx_queue->rxic);
+	rxcount = get_icft_value(rx_queue->rxic);
+	txtime  = get_ictt_value(tx_queue->txic);
+	txcount = get_icft_value(tx_queue->txic);
 	cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, rxtime);
 	cvals->rx_max_coalesced_frames = rxcount;
 
@@ -339,16 +352,23 @@
 static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	int i = 0;
 
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
 		return -EOPNOTSUPP;
 
 	/* Set up rx coalescing */
+	/* As of now, we will enable/disable coalescing for all
+	 * queues together in case of eTSEC2, this will be modified
+	 * along with the ethtool interface */
 	if ((cvals->rx_coalesce_usecs == 0) ||
-	    (cvals->rx_max_coalesced_frames == 0))
-		priv->rxcoalescing = 0;
-	else
-		priv->rxcoalescing = 1;
+	    (cvals->rx_max_coalesced_frames == 0)) {
+		for (i = 0; i < priv->num_rx_queues; i++)
+			priv->rx_queue[i]->rxcoalescing = 0;
+	} else {
+		for (i = 0; i < priv->num_rx_queues; i++)
+			priv->rx_queue[i]->rxcoalescing = 1;
+	}
 
 	if (NULL == priv->phydev)
 		return -ENODEV;
@@ -366,15 +386,21 @@
 		return -EINVAL;
 	}
 
-	priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
-		gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i]->rxic = mk_ic_value(
+			cvals->rx_max_coalesced_frames,
+			gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
+	}
 
 	/* Set up tx coalescing */
 	if ((cvals->tx_coalesce_usecs == 0) ||
-	    (cvals->tx_max_coalesced_frames == 0))
-		priv->txcoalescing = 0;
-	else
-		priv->txcoalescing = 1;
+	    (cvals->tx_max_coalesced_frames == 0)) {
+		for (i = 0; i < priv->num_tx_queues; i++)
+			priv->tx_queue[i]->txcoalescing = 0;
+	} else {
+		for (i = 0; i < priv->num_tx_queues; i++)
+			priv->tx_queue[i]->txcoalescing = 1;
+	}
 
 	/* Check the bounds of the values */
 	if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
@@ -389,16 +415,13 @@
 		return -EINVAL;
 	}
 
-	priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
-		gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i]->txic = mk_ic_value(
+			cvals->tx_max_coalesced_frames,
+			gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
+	}
 
-	gfar_write(&priv->regs->rxic, 0);
-	if (priv->rxcoalescing)
-		gfar_write(&priv->regs->rxic, priv->rxic);
-
-	gfar_write(&priv->regs->txic, 0);
-	if (priv->txcoalescing)
-		gfar_write(&priv->regs->txic, priv->txic);
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
 
 	return 0;
 }
@@ -409,6 +432,11 @@
 static void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+
+	tx_queue = priv->tx_queue[0];
+	rx_queue = priv->rx_queue[0];
 
 	rvals->rx_max_pending = GFAR_RX_MAX_RING_SIZE;
 	rvals->rx_mini_max_pending = GFAR_RX_MAX_RING_SIZE;
@@ -418,10 +446,10 @@
 	/* Values changeable by the user.  The valid values are
 	 * in the range 1 to the "*_max_pending" counterpart above.
 	 */
-	rvals->rx_pending = priv->rx_ring_size;
-	rvals->rx_mini_pending = priv->rx_ring_size;
-	rvals->rx_jumbo_pending = priv->rx_ring_size;
-	rvals->tx_pending = priv->tx_ring_size;
+	rvals->rx_pending = rx_queue->rx_ring_size;
+	rvals->rx_mini_pending = rx_queue->rx_ring_size;
+	rvals->rx_jumbo_pending = rx_queue->rx_ring_size;
+	rvals->tx_pending = tx_queue->tx_ring_size;
 }
 
 /* Change the current ring parameters, stopping the controller if
@@ -431,7 +459,7 @@
 static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	int err = 0;
+	int err = 0, i = 0;
 
 	if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
 		return -EINVAL;
@@ -451,34 +479,41 @@
 		return -EINVAL;
 	}
 
+
 	if (dev->flags & IFF_UP) {
 		unsigned long flags;
 
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->txlock, flags);
-		spin_lock(&priv->rxlock);
+		local_irq_save(flags);
+		lock_tx_qs(priv);
+		lock_rx_qs(priv);
 
 		gfar_halt(dev);
 
-		spin_unlock(&priv->rxlock);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		unlock_rx_qs(priv);
+		unlock_tx_qs(priv);
+		local_irq_restore(flags);
 
-		gfar_clean_rx_ring(dev, priv->rx_ring_size);
+		for (i = 0; i < priv->num_rx_queues; i++)
+			gfar_clean_rx_ring(priv->rx_queue[i],
+					priv->rx_queue[i]->rx_ring_size);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
 	}
 
 	/* Change the size */
-	priv->rx_ring_size = rvals->rx_pending;
-	priv->tx_ring_size = rvals->tx_pending;
-	priv->num_txbdfree = priv->tx_ring_size;
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i]->rx_ring_size = rvals->rx_pending;
+		priv->tx_queue[i]->tx_ring_size = rvals->tx_pending;
+		priv->tx_queue[i]->num_txbdfree = priv->tx_queue[i]->tx_ring_size;
+	}
 
 	/* Rebuild the rings with the new size */
 	if (dev->flags & IFF_UP) {
 		err = startup_gfar(dev);
-		netif_wake_queue(dev);
+		netif_tx_wake_all_queues(dev);
 	}
 	return err;
 }
@@ -487,23 +522,28 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
-	int err = 0;
+	int err = 0, i = 0;
 
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
+
 	if (dev->flags & IFF_UP) {
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->txlock, flags);
-		spin_lock(&priv->rxlock);
+		local_irq_save(flags);
+		lock_tx_qs(priv);
+		lock_rx_qs(priv);
 
 		gfar_halt(dev);
 
-		spin_unlock(&priv->rxlock);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		unlock_tx_qs(priv);
+		unlock_rx_qs(priv);
+		local_irq_save(flags);
 
-		gfar_clean_rx_ring(dev, priv->rx_ring_size);
+		for (i = 0; i < priv->num_rx_queues; i++)
+			gfar_clean_rx_ring(priv->rx_queue[i],
+					priv->rx_queue[i]->rx_ring_size);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
@@ -515,7 +555,7 @@
 
 	if (dev->flags & IFF_UP) {
 		err = startup_gfar(dev);
-		netif_wake_queue(dev);
+		netif_tx_wake_all_queues(dev);
 	}
 	return err;
 }
@@ -605,6 +645,241 @@
 }
 #endif
 
+static int gfar_ethflow_to_class(int flow_type, u64 *class)
+{
+	switch (flow_type) {
+	case TCP_V4_FLOW:
+		*class = CLASS_CODE_TCP_IPV4;
+		break;
+	case UDP_V4_FLOW:
+		*class = CLASS_CODE_UDP_IPV4;
+		break;
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+		*class = CLASS_CODE_AH_ESP_IPV4;
+		break;
+	case SCTP_V4_FLOW:
+		*class = CLASS_CODE_SCTP_IPV4;
+		break;
+	case TCP_V6_FLOW:
+		*class = CLASS_CODE_TCP_IPV6;
+		break;
+	case UDP_V6_FLOW:
+		*class = CLASS_CODE_UDP_IPV6;
+		break;
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+		*class = CLASS_CODE_AH_ESP_IPV6;
+		break;
+	case SCTP_V6_FLOW:
+		*class = CLASS_CODE_SCTP_IPV6;
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow)
+{
+	u32 fcr = 0x0, fpr = FPR_FILER_MASK;
+
+	if (ethflow & RXH_L2DA) {
+		fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH |
+			RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+
+		fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH |
+				RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_VLAN) {
+		fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+				RQFCR_AND | RQFCR_HASHTBL_0;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_IP_SRC) {
+		fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & (RXH_IP_DST)) {
+		fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_L3_PROTO) {
+		fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_L4_B_0_1) {
+		fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_L4_B_2_3) {
+		fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+}
+
+static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u64 class)
+{
+	unsigned int last_rule_idx = priv->cur_filer_idx;
+	unsigned int cmp_rqfpr;
+	unsigned int local_rqfpr[MAX_FILER_IDX + 1];
+	unsigned int local_rqfcr[MAX_FILER_IDX + 1];
+	int i = 0x0, k = 0x0;
+	int j = MAX_FILER_IDX, l = 0x0;
+
+	switch (class) {
+	case TCP_V4_FLOW:
+		cmp_rqfpr = RQFPR_IPV4 |RQFPR_TCP;
+		break;
+	case UDP_V4_FLOW:
+		cmp_rqfpr = RQFPR_IPV4 |RQFPR_UDP;
+		break;
+	case TCP_V6_FLOW:
+		cmp_rqfpr = RQFPR_IPV6 |RQFPR_TCP;
+		break;
+	case UDP_V6_FLOW:
+		cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP;
+		break;
+	case IPV4_FLOW:
+		cmp_rqfpr = RQFPR_IPV4;
+	case IPV6_FLOW:
+		cmp_rqfpr = RQFPR_IPV6;
+		break;
+	default:
+		printk(KERN_ERR "Right now this class is not supported\n");
+		return 0;
+	}
+
+	for (i = 0; i < MAX_FILER_IDX + 1; i++) {
+		local_rqfpr[j] = ftp_rqfpr[i];
+		local_rqfcr[j] = ftp_rqfcr[i];
+		j--;
+		if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE |
+			RQFCR_CLE |RQFCR_AND)) &&
+			(ftp_rqfpr[i] == cmp_rqfpr))
+			break;
+	}
+
+	if (i == MAX_FILER_IDX + 1) {
+		printk(KERN_ERR "No parse rule found, ");
+		printk(KERN_ERR "can't create hash rules\n");
+		return 0;
+	}
+
+	/* If a match was found, then it begins the starting of a cluster rule
+	 * if it was already programmed, we need to overwrite these rules
+	 */
+	for (l = i+1; l < MAX_FILER_IDX; l++) {
+		if ((ftp_rqfcr[l] & RQFCR_CLE) &&
+			!(ftp_rqfcr[l] & RQFCR_AND)) {
+			ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
+				RQFCR_HASHTBL_0 | RQFCR_PID_MASK;
+			ftp_rqfpr[l] = FPR_FILER_MASK;
+			gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]);
+			break;
+		}
+
+		if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND))
+			continue;
+		else {
+			local_rqfpr[j] = ftp_rqfpr[l];
+			local_rqfcr[j] = ftp_rqfcr[l];
+			j--;
+		}
+	}
+
+	priv->cur_filer_idx = l - 1;
+	last_rule_idx = l;
+
+	/* hash rules */
+	ethflow_to_filer_rules(priv, ethflow);
+
+	/* Write back the popped out rules again */
+	for (k = j+1; k < MAX_FILER_IDX; k++) {
+		ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
+		ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
+		gfar_write_filer(priv, priv->cur_filer_idx,
+				local_rqfcr[k], local_rqfpr[k]);
+		if (!priv->cur_filer_idx)
+			break;
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	return 1;
+}
+
+static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
+{
+	u64 class;
+
+	if (!gfar_ethflow_to_class(cmd->flow_type, &class))
+		return -EINVAL;
+
+	if (class < CLASS_CODE_USER_PROG1 ||
+			class > CLASS_CODE_SCTP_IPV6)
+		return -EINVAL;
+
+	/* write the filer rules here */
+	if (!gfar_ethflow_to_filer_table(priv, cmd->data, cmd->flow_type))
+		return -1;
+
+	return 0;
+}
+
+static int gfar_set_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+	int ret = 0;
+
+	switch(cmd->cmd) {
+	case ETHTOOL_SRXFH:
+		ret = gfar_set_hash_opts(priv, cmd);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
 const struct ethtool_ops gfar_ethtool_ops = {
 	.get_settings = gfar_gsettings,
 	.set_settings = gfar_ssettings,
@@ -630,4 +905,5 @@
 	.get_wol = gfar_get_wol,
 	.set_wol = gfar_set_wol,
 #endif
+	.set_rxnfc = gfar_set_nfc,
 };
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index dd26da7..b98c6c5 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -8,8 +8,9 @@
  *
  * Author: Andy Fleming
  * Maintainer: Kumar Gala (galak@kernel.crashing.org)
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2005 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -49,6 +50,7 @@
 				 const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	int new_setting = 0;
 	u32 temp;
 	unsigned long flags;
@@ -56,30 +58,34 @@
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BD_STASHING))
 		return count;
 
+
 	/* Find out the new setting */
 	if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
 		new_setting = 1;
-	else if (!strncmp("off", buf, count - 1)
-		 || !strncmp("0", buf, count - 1))
+	else if (!strncmp("off", buf, count - 1) ||
+		 !strncmp("0", buf, count - 1))
 		new_setting = 0;
 	else
 		return count;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+
+	local_irq_save(flags);
+	lock_rx_qs(priv);
 
 	/* Set the new stashing value */
 	priv->bd_stash_en = new_setting;
 
-	temp = gfar_read(&priv->regs->attr);
+	temp = gfar_read(&regs->attr);
 
 	if (new_setting)
 		temp |= ATTR_BDSTASH;
 	else
 		temp &= ~(ATTR_BDSTASH);
 
-	gfar_write(&priv->regs->attr, temp);
+	gfar_write(&regs->attr, temp);
 
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -99,6 +105,7 @@
 				      const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int length = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -106,7 +113,9 @@
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
 		return count;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+	local_irq_save(flags);
+	lock_rx_qs(priv);
+
 	if (length > priv->rx_buffer_size)
 		goto out;
 
@@ -115,23 +124,24 @@
 
 	priv->rx_stash_size = length;
 
-	temp = gfar_read(&priv->regs->attreli);
+	temp = gfar_read(&regs->attreli);
 	temp &= ~ATTRELI_EL_MASK;
 	temp |= ATTRELI_EL(length);
-	gfar_write(&priv->regs->attreli, temp);
+	gfar_write(&regs->attreli, temp);
 
 	/* Turn stashing on/off as appropriate */
-	temp = gfar_read(&priv->regs->attr);
+	temp = gfar_read(&regs->attr);
 
 	if (length)
 		temp |= ATTR_BUFSTASH;
 	else
 		temp &= ~(ATTR_BUFSTASH);
 
-	gfar_write(&priv->regs->attr, temp);
+	gfar_write(&regs->attr, temp);
 
 out:
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -154,6 +164,7 @@
 				       const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned short index = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -161,7 +172,9 @@
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
 		return count;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+	local_irq_save(flags);
+	lock_rx_qs(priv);
+
 	if (index > priv->rx_stash_size)
 		goto out;
 
@@ -170,13 +183,14 @@
 
 	priv->rx_stash_index = index;
 
-	temp = gfar_read(&priv->regs->attreli);
+	temp = gfar_read(&regs->attreli);
 	temp &= ~ATTRELI_EI_MASK;
 	temp |= ATTRELI_EI(index);
-	gfar_write(&priv->regs->attreli, flags);
+	gfar_write(&regs->attreli, temp);
 
 out:
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -198,6 +212,7 @@
 				       const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int length = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -205,16 +220,18 @@
 	if (length > GFAR_MAX_FIFO_THRESHOLD)
 		return count;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
 
 	priv->fifo_threshold = length;
 
-	temp = gfar_read(&priv->regs->fifo_tx_thr);
+	temp = gfar_read(&regs->fifo_tx_thr);
 	temp &= ~FIFO_TX_THR_MASK;
 	temp |= length;
-	gfar_write(&priv->regs->fifo_tx_thr, temp);
+	gfar_write(&regs->fifo_tx_thr, temp);
 
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -235,6 +252,7 @@
 				    const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int num = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -242,16 +260,18 @@
 	if (num > GFAR_MAX_FIFO_STARVE)
 		return count;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
 
 	priv->fifo_starve = num;
 
-	temp = gfar_read(&priv->regs->fifo_tx_starve);
+	temp = gfar_read(&regs->fifo_tx_starve);
 	temp &= ~FIFO_TX_STARVE_MASK;
 	temp |= num;
-	gfar_write(&priv->regs->fifo_tx_starve, temp);
+	gfar_write(&regs->fifo_tx_starve, temp);
 
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -273,6 +293,7 @@
 					const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int num = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -280,16 +301,18 @@
 	if (num > GFAR_MAX_FIFO_STARVE_OFF)
 		return count;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
 
 	priv->fifo_starve_off = num;
 
-	temp = gfar_read(&priv->regs->fifo_tx_starve_shutoff);
+	temp = gfar_read(&regs->fifo_tx_starve_shutoff);
 	temp &= ~FIFO_TX_STARVE_OFF_MASK;
 	temp |= num;
-	gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp);
+	gfar_write(&regs->fifo_tx_starve_shutoff, temp);
 
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index f7519a5..ea85075 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -407,10 +407,9 @@
 /* A few values that may be tweaked. */
 /* Size of each temporary Rx buffer, calculated as:
  * 1518 bytes (ethernet packet) + 2 bytes (to get 8 byte alignment for
- * the card) + 8 bytes of status info + 8 bytes for the Rx Checksum +
- * 2 more because we use skb_reserve.
+ * the card) + 8 bytes of status info + 8 bytes for the Rx Checksum
  */
-#define PKT_BUF_SZ		1538
+#define PKT_BUF_SZ		1536
 
 /* For now, this is going to be set to the maximum size of an ethernet
  * packet.  Eventually, we may want to make it a variable that is
@@ -873,7 +872,7 @@
 	u32 rx_int_var, tx_int_var;
 	u16 fifo_info;
 
-	i = request_irq(dev->irq, &hamachi_interrupt, IRQF_SHARED, dev->name, dev);
+	i = request_irq(dev->irq, hamachi_interrupt, IRQF_SHARED, dev->name, dev);
 	if (i)
 		return i;
 
@@ -1152,12 +1151,13 @@
 	}
 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = netdev_alloc_skb(dev, hmp->rx_buf_sz);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev, hmp->rx_buf_sz);
 		hmp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
 
-		skb_reserve(skb, 2); /* 16 byte align the IP header. */
                 hmp->rx_ring[i].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
 			skb->data, hmp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 		hmp->rx_ring[i].status_n_length = cpu_to_le32(DescOwn |
@@ -1196,7 +1196,7 @@
 	 * card.  -KDU
 	 */
 	hmp->rx_buf_sz = (dev->mtu <= 1492 ? PKT_BUF_SZ :
-		(((dev->mtu+26+7) & ~7) + 2 + 16));
+		(((dev->mtu+26+7) & ~7) + 16));
 
 	/* Initialize all Rx descriptors. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
@@ -1566,8 +1566,8 @@
 #endif
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak
-				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 #ifdef RX_CHECKSUM
 				printk(KERN_ERR "%s: rx_copybreak non-zero "
 				  "not good with RX_CHECKSUM\n", dev->name);
@@ -1722,10 +1722,10 @@
 		readl(ioaddr + 0x370);
 		readl(ioaddr + 0x3F0);
 	}
-	if ((intr_status & ~(LinkChange|StatsMax|NegotiationChange|IntrRxDone|IntrTxDone))
-		&& hamachi_debug)
+	if ((intr_status & ~(LinkChange|StatsMax|NegotiationChange|IntrRxDone|IntrTxDone)) &&
+	    hamachi_debug)
 		printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
-			   dev->name, intr_status);
+		       dev->name, intr_status);
 	/* Hmmmmm, it's not clear how to recover from PCI faults. */
 	if (intr_status & (IntrTxPCIErr | IntrTxPCIFault))
 		hmp->stats.tx_fifo_errors++;
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index fb58830..689b9bd 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -34,6 +34,7 @@
 #include <linux/ip.h>
 #include <linux/tcp.h>
 #include <linux/semaphore.h>
+#include <linux/compat.h>
 #include <asm/atomic.h>
 
 #define SIXPACK_VERSION    "Revision: 0.3.0"
@@ -777,6 +778,23 @@
 	return err;
 }
 
+#ifdef CONFIG_COMPAT
+static long sixpack_compat_ioctl(struct tty_struct * tty, struct file * file,
+				unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCGIFNAME:
+	case SIOCGIFENCAP:
+	case SIOCSIFENCAP:
+	case SIOCSIFHWADDR:
+		return sixpack_ioctl(tty, file, cmd,
+				(unsigned long)compat_ptr(arg));
+	}
+
+	return -ENOIOCTLCMD;
+}
+#endif
+
 static struct tty_ldisc_ops sp_ldisc = {
 	.owner		= THIS_MODULE,
 	.magic		= TTY_LDISC_MAGIC,
@@ -784,6 +802,9 @@
 	.open		= sixpack_open,
 	.close		= sixpack_close,
 	.ioctl		= sixpack_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= sixpack_compat_ioctl,
+#endif
 	.receive_buf	= sixpack_receive_buf,
 	.write_wakeup	= sixpack_write_wakeup,
 };
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index e344c84..a3c0dc9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -596,16 +596,16 @@
 					if (!(notbitstream & (0x1fc << j)))
 						state = 0;
 
-					/* not flag received */
-					else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+					/* flag received */
+					else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) {
 						if (state)
 							do_rxpacket(dev);
 						bc->hdlcrx.bufcnt = 0;
 						bc->hdlcrx.bufptr = bc->hdlcrx.buf;
 						state = 1;
 						numbits = 7-j;
-						}
 					}
+				}
 
 				/* stuffed bit */
 				else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index fe893c9..ae5f11c 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -167,10 +167,7 @@
 
 static inline int dev_is_ethdev(struct net_device *dev)
 {
-	return (
-			dev->type == ARPHRD_ETHER
-			&& strncmp(dev->name, "dummy", 5)
-	);
+	return (dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5));
 }
 
 /* ------------------------------------------------------------------------ */
@@ -186,7 +183,7 @@
 	struct ethhdr *eth;
 	struct bpqdev *bpq;
 
-	if (dev_net(dev) != &init_net)
+	if (!net_eq(dev_net(dev), &init_net))
 		goto drop;
 
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
@@ -552,7 +549,7 @@
 {
 	struct net_device *dev = (struct net_device *)ptr;
 
-	if (dev_net(dev) != &init_net)
+	if (!net_eq(dev_net(dev), &init_net))
 		return NOTIFY_DONE;
 
 	if (!dev_is_ethdev(dev))
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 950f3bb..9ee76b4 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -331,8 +331,8 @@
 			for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) {
 				j = (io[i] -
 				     hw[h].io_region) / hw[h].io_delta;
-				if (j >= 0 && j < hw[h].num_devs
-				    && hw[h].io_region +
+				if (j >= 0 && j < hw[h].num_devs &&
+				    hw[h].io_region +
 				    j * hw[h].io_delta == io[i]) {
 					base[j] = io[i];
 				}
@@ -396,8 +396,8 @@
 					t_val =
 					    inb(t1[i]) + (inb(t1[i]) << 8);
 					/* Also check whether counter did wrap */
-					if (t_val == 0
-					    || t_val > TMR_0_HZ / HZ * 10)
+					if (t_val == 0 ||
+					    t_val > TMR_0_HZ / HZ * 10)
 						counting[i] = 0;
 					delay[i] = jiffies - start[i];
 				}
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index db4b7f1..7db0a1c 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -36,6 +36,7 @@
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
 #include <linux/jiffies.h>
+#include <linux/compat.h>
 
 #include <net/ax25.h>
 
@@ -898,6 +899,23 @@
 	return err;
 }
 
+#ifdef CONFIG_COMPAT
+static long mkiss_compat_ioctl(struct tty_struct *tty, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCGIFNAME:
+	case SIOCGIFENCAP:
+	case SIOCSIFENCAP:
+	case SIOCSIFHWADDR:
+		return mkiss_ioctl(tty, file, cmd,
+				   (unsigned long)compat_ptr(arg));
+	}
+
+	return -ENOIOCTLCMD;
+}
+#endif
+
 /*
  * Handle the 'receiver data ready' interrupt.
  * This function is called by the 'tty_io' module in the kernel when
@@ -972,6 +990,9 @@
 	.open		= mkiss_open,
 	.close		= mkiss_close,
 	.ioctl		= mkiss_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= mkiss_compat_ioctl,
+#endif
 	.receive_buf	= mkiss_receive_buf,
 	.write_wakeup	= mkiss_write_wakeup
 };
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index 0486cbe..efdbcad 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -187,8 +187,8 @@
 		return -EBUSY;
 
 	/* Check for the HP+ signature, 50 48 0x 53. */
-	if (inw(ioaddr + HP_ID) != 0x4850
-		|| (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
+	if (inw(ioaddr + HP_ID) != 0x4850 ||
+	    (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
 		retval = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index dd86651..90f890e 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -993,8 +993,8 @@
 	if (lp->mode == 1) {	/* only needed for Busmaster */
 		int xmit_stop, recv_stop;
 
-		if ((lp->chip == HP100_CHIPID_RAINIER)
-		    || (lp->chip == HP100_CHIPID_SHASTA)) {
+		if ((lp->chip == HP100_CHIPID_RAINIER) ||
+		    (lp->chip == HP100_CHIPID_SHASTA)) {
 			int pdl_stop;
 
 			/*
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 3fae875..fb5e019 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1976,27 +1976,27 @@
 	if (cmd->autoneg == AUTONEG_DISABLE) {
 		switch (cmd->speed) {
 		case SPEED_10:
-			if (cmd->duplex == DUPLEX_HALF
-			    && !(f & SUPPORTED_10baseT_Half))
+			if (cmd->duplex == DUPLEX_HALF &&
+			    !(f & SUPPORTED_10baseT_Half))
 				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL
-			    && !(f & SUPPORTED_10baseT_Full))
+			if (cmd->duplex == DUPLEX_FULL &&
+			    !(f & SUPPORTED_10baseT_Full))
 				return -EINVAL;
 			break;
 		case SPEED_100:
-			if (cmd->duplex == DUPLEX_HALF
-			    && !(f & SUPPORTED_100baseT_Half))
+			if (cmd->duplex == DUPLEX_HALF &&
+			    !(f & SUPPORTED_100baseT_Half))
 				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL
-			    && !(f & SUPPORTED_100baseT_Full))
+			if (cmd->duplex == DUPLEX_FULL &&
+			    !(f & SUPPORTED_100baseT_Full))
 				return -EINVAL;
 			break;
 		case SPEED_1000:
-			if (cmd->duplex == DUPLEX_HALF
-			    && !(f & SUPPORTED_1000baseT_Half))
+			if (cmd->duplex == DUPLEX_HALF &&
+			    !(f & SUPPORTED_1000baseT_Half))
 				return -EINVAL;
-			if (cmd->duplex == DUPLEX_FULL
-			    && !(f & SUPPORTED_1000baseT_Full))
+			if (cmd->duplex == DUPLEX_FULL &&
+			    !(f & SUPPORTED_1000baseT_Full))
 				return -EINVAL;
 			break;
 		default:
@@ -2149,9 +2149,12 @@
 	return res;
 }
 
-static int emac_ethtool_get_stats_count(struct net_device *ndev)
+static int emac_ethtool_get_sset_count(struct net_device *ndev, int stringset)
 {
-	return EMAC_ETHTOOL_STATS_COUNT;
+	if (stringset == ETH_SS_STATS)
+		return EMAC_ETHTOOL_STATS_COUNT;
+	else
+		return -EINVAL;
 }
 
 static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
@@ -2182,7 +2185,6 @@
 	info->fw_version[0] = '\0';
 	sprintf(info->bus_info, "PPC 4xx EMAC-%d %s",
 		dev->cell_index, dev->ofdev->node->full_name);
-	info->n_stats = emac_ethtool_get_stats_count(ndev);
 	info->regdump_len = emac_ethtool_get_regs_len(ndev);
 }
 
@@ -2202,7 +2204,7 @@
 	.get_rx_csum = emac_ethtool_get_rx_csum,
 
 	.get_strings = emac_ethtool_get_strings,
-	.get_stats_count = emac_ethtool_get_stats_count,
+	.get_sset_count = emac_ethtool_get_sset_count,
 	.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
 
 	.get_link = ethtool_op_get_link,
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 5862282..a866939 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -625,7 +625,7 @@
 	}
 
 	ibmveth_debug_printk("registering irq 0x%x\n", netdev->irq);
-	if((rc = request_irq(netdev->irq, &ibmveth_interrupt, 0, netdev->name, netdev)) != 0) {
+	if((rc = request_irq(netdev->irq, ibmveth_interrupt, 0, netdev->name, netdev)) != 0) {
 		ibmveth_error_printk("unable to request irq 0x%x, rc %d\n", netdev->irq, rc);
 		do {
 			rc = h_free_logical_lan(adapter->vdev->unit_address);
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 030913f..f4081c0 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -98,14 +98,16 @@
 		stats->tx_packets++;
 		stats->tx_bytes +=skb->len;
 
-		skb->dev = dev_get_by_index(&init_net, skb->iif);
+		rcu_read_lock();
+		skb->dev = dev_get_by_index_rcu(&init_net, skb->skb_iif);
 		if (!skb->dev) {
+			rcu_read_unlock();
 			dev_kfree_skb(skb);
 			stats->tx_dropped++;
 			break;
 		}
-		dev_put(skb->dev);
-		skb->iif = _dev->ifindex;
+		rcu_read_unlock();
+		skb->skb_iif = _dev->ifindex;
 
 		if (from & AT_EGRESS) {
 			dp->st_rx_frm_egr++;
@@ -170,7 +172,7 @@
 	stats->rx_packets++;
 	stats->rx_bytes+=skb->len;
 
-	if (!(from & (AT_INGRESS|AT_EGRESS)) || !skb->iif) {
+	if (!(from & (AT_INGRESS|AT_EGRESS)) || !skb->skb_iif) {
 		dev_kfree_skb(skb);
 		stats->rx_dropped++;
 		return NETDEV_TX_OK;
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index f8f5772..e8e9e91 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -46,7 +46,10 @@
 static s32  igb_init_hw_82575(struct e1000_hw *);
 static s32  igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
 static s32  igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static s32  igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
+static s32  igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
 static s32  igb_reset_hw_82575(struct e1000_hw *);
+static s32  igb_reset_hw_82580(struct e1000_hw *);
 static s32  igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
 static s32  igb_setup_copper_link_82575(struct e1000_hw *);
 static s32  igb_setup_serdes_link_82575(struct e1000_hw *);
@@ -62,6 +65,12 @@
 static s32  igb_read_mac_addr_82575(struct e1000_hw *);
 static s32  igb_set_pcie_completion_timeout(struct e1000_hw *hw);
 
+static const u16 e1000_82580_rxpbs_table[] =
+	{ 36, 72, 144, 1, 2, 4, 8, 16,
+	  35, 70, 140 };
+#define E1000_82580_RXPBS_TABLE_SIZE \
+	(sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
+
 static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
@@ -81,12 +90,20 @@
 		break;
 	case E1000_DEV_ID_82576:
 	case E1000_DEV_ID_82576_NS:
+	case E1000_DEV_ID_82576_NS_SERDES:
 	case E1000_DEV_ID_82576_FIBER:
 	case E1000_DEV_ID_82576_SERDES:
 	case E1000_DEV_ID_82576_QUAD_COPPER:
 	case E1000_DEV_ID_82576_SERDES_QUAD:
 		mac->type = e1000_82576;
 		break;
+	case E1000_DEV_ID_82580_COPPER:
+	case E1000_DEV_ID_82580_FIBER:
+	case E1000_DEV_ID_82580_SERDES:
+	case E1000_DEV_ID_82580_SGMII:
+	case E1000_DEV_ID_82580_COPPER_DUAL:
+		mac->type = e1000_82580;
+		break;
 	default:
 		return -E1000_ERR_MAC_INIT;
 		break;
@@ -109,6 +126,7 @@
 		dev_spec->sgmii_active = true;
 		ctrl_ext |= E1000_CTRL_I2C_ENA;
 		break;
+	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
 	case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
 		hw->phy.media_type = e1000_media_type_internal_serdes;
 		ctrl_ext |= E1000_CTRL_I2C_ENA;
@@ -120,12 +138,26 @@
 
 	wr32(E1000_CTRL_EXT, ctrl_ext);
 
+	/*
+	 * if using i2c make certain the MDICNFG register is cleared to prevent
+	 * communications from being misrouted to the mdic registers
+	 */
+	if ((ctrl_ext & E1000_CTRL_I2C_ENA) && (hw->mac.type == e1000_82580))
+		wr32(E1000_MDICNFG, 0);
+
 	/* Set mta register count */
 	mac->mta_reg_count = 128;
 	/* Set rar entry count */
 	mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
 	if (mac->type == e1000_82576)
 		mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+	if (mac->type == e1000_82580)
+		mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+	/* reset */
+	if (mac->type == e1000_82580)
+		mac->ops.reset_hw = igb_reset_hw_82580;
+	else
+		mac->ops.reset_hw = igb_reset_hw_82575;
 	/* Set if part includes ASF firmware */
 	mac->asf_firmware_present = true;
 	/* Set if manageability features are enabled. */
@@ -193,6 +225,10 @@
 		phy->ops.reset              = igb_phy_hw_reset_sgmii_82575;
 		phy->ops.read_reg           = igb_read_phy_reg_sgmii_82575;
 		phy->ops.write_reg          = igb_write_phy_reg_sgmii_82575;
+	} else if (hw->mac.type == e1000_82580) {
+		phy->ops.reset              = igb_phy_hw_reset;
+		phy->ops.read_reg           = igb_read_phy_reg_82580;
+		phy->ops.write_reg          = igb_write_phy_reg_82580;
 	} else {
 		phy->ops.reset              = igb_phy_hw_reset;
 		phy->ops.read_reg           = igb_read_phy_reg_igp;
@@ -224,6 +260,12 @@
 		phy->ops.set_d0_lplu_state  = igb_set_d0_lplu_state_82575;
 		phy->ops.set_d3_lplu_state  = igb_set_d3_lplu_state;
 		break;
+	case I82580_I_PHY_ID:
+		phy->type                   = e1000_phy_82580;
+		phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
+		phy->ops.get_cable_length   = igb_get_cable_length_82580;
+		phy->ops.get_phy_info       = igb_get_phy_info_82580;
+		break;
 	default:
 		return -E1000_ERR_PHY;
 	}
@@ -240,9 +282,10 @@
  **/
 static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
 {
-	u16 mask;
+	u16 mask = E1000_SWFW_PHY0_SM;
 
-	mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
 
 	return igb_acquire_swfw_sync_82575(hw, mask);
 }
@@ -256,9 +299,11 @@
  **/
 static void igb_release_phy_82575(struct e1000_hw *hw)
 {
-	u16 mask;
+	u16 mask = E1000_SWFW_PHY0_SM;
 
-	mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
+
 	igb_release_swfw_sync_82575(hw, mask);
 }
 
@@ -274,45 +319,23 @@
 static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
 					  u16 *data)
 {
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, i2ccmd = 0;
+	s32 ret_val = -E1000_ERR_PARAM;
 
 	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
 		hw_dbg("PHY Address %u is out of range\n", offset);
-		return -E1000_ERR_PARAM;
+		goto out;
 	}
 
-	/*
-	 * Set up Op-code, Phy Address, and register address in the I2CCMD
-	 * register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
-		  (E1000_I2CCMD_OPCODE_READ));
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
 
-	wr32(E1000_I2CCMD, i2ccmd);
+	ret_val = igb_read_phy_reg_i2c(hw, offset, data);
 
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		udelay(50);
-		i2ccmd = rd32(E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		hw_dbg("I2CCMD Read did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		hw_dbg("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
+	hw->phy.ops.release(hw);
 
-	/* Need to byte-swap the 16-bit value. */
-	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
-
-	return 0;
+out:
+	return ret_val;
 }
 
 /**
@@ -327,47 +350,24 @@
 static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
 					   u16 data)
 {
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, i2ccmd = 0;
-	u16 phy_data_swapped;
+	s32 ret_val = -E1000_ERR_PARAM;
+
 
 	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
 		hw_dbg("PHY Address %d is out of range\n", offset);
-		return -E1000_ERR_PARAM;
+		goto out;
 	}
 
-	/* Swap the data bytes for the I2C interface */
-	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
 
-	/*
-	 * Set up Op-code, Phy Address, and register address in the I2CCMD
-	 * register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_WRITE |
-		  phy_data_swapped);
+	ret_val = igb_write_phy_reg_i2c(hw, offset, data);
 
-	wr32(E1000_I2CCMD, i2ccmd);
+	hw->phy.ops.release(hw);
 
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		udelay(50);
-		i2ccmd = rd32(E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		hw_dbg("I2CCMD Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		hw_dbg("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-
-	return 0;
+out:
+	return ret_val;
 }
 
 /**
@@ -676,6 +676,10 @@
 
 	if (hw->bus.func == 1)
 		mask = E1000_NVM_CFG_DONE_PORT_1;
+	else if (hw->bus.func == E1000_FUNC_2)
+		mask = E1000_NVM_CFG_DONE_PORT_2;
+	else if (hw->bus.func == E1000_FUNC_3)
+		mask = E1000_NVM_CFG_DONE_PORT_3;
 
 	while (timeout) {
 		if (rd32(E1000_EEMNGCTL) & mask)
@@ -706,9 +710,7 @@
 	s32 ret_val;
 	u16 speed, duplex;
 
-	/* SGMII link check is done through the PCS register. */
-	if ((hw->phy.media_type != e1000_media_type_copper) ||
-	    (igb_sgmii_active_82575(hw))) {
+	if (hw->phy.media_type != e1000_media_type_copper) {
 		ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
 		                                             &duplex);
 		/*
@@ -723,6 +725,7 @@
 
 	return ret_val;
 }
+
 /**
  *  igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
@@ -788,13 +791,27 @@
 void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
 {
 	u32 reg;
+	u16 eeprom_data = 0;
 
 	if (hw->phy.media_type != e1000_media_type_internal_serdes ||
 	    igb_sgmii_active_82575(hw))
 		return;
 
-	/* if the management interface is not enabled, then power down */
-	if (!igb_enable_mng_pass_thru(hw)) {
+	if (hw->bus.func == E1000_FUNC_0)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+	else if (hw->mac.type == e1000_82580)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+		                 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+		                 &eeprom_data);
+	else if (hw->bus.func == E1000_FUNC_1)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+	/*
+	 * If APM is not enabled in the EEPROM and management interface is
+	 * not enabled, then power down.
+	 */
+	if (!(eeprom_data & E1000_NVM_APME_82575) &&
+	    !igb_enable_mng_pass_thru(hw)) {
 		/* Disable PCS to turn off link */
 		reg = rd32(E1000_PCS_CFG0);
 		reg &= ~E1000_PCS_CFG_PCS_EN;
@@ -908,6 +925,11 @@
 	for (i = 0; i < mac->mta_reg_count; i++)
 		array_wr32(E1000_MTA, i, 0);
 
+	/* Zero out the Unicast HASH table */
+	hw_dbg("Zeroing the UTA\n");
+	for (i = 0; i < mac->uta_reg_count; i++)
+		array_wr32(E1000_UTA, i, 0);
+
 	/* Setup link and flow control */
 	ret_val = igb_setup_link(hw);
 
@@ -934,7 +956,6 @@
 {
 	u32 ctrl;
 	s32  ret_val;
-	bool link;
 
 	ctrl = rd32(E1000_CTRL);
 	ctrl |= E1000_CTRL_SLU;
@@ -946,6 +967,9 @@
 		goto out;
 
 	if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+		/* allow time for SFP cage time to power up phy */
+		msleep(300);
+
 		ret_val = hw->phy.ops.reset(hw);
 		if (ret_val) {
 			hw_dbg("Error resetting the PHY.\n");
@@ -959,6 +983,9 @@
 	case e1000_phy_igp_3:
 		ret_val = igb_copper_link_setup_igp(hw);
 		break;
+	case e1000_phy_82580:
+		ret_val = igb_copper_link_setup_82580(hw);
+		break;
 	default:
 		ret_val = -E1000_ERR_PHY;
 		break;
@@ -967,57 +994,24 @@
 	if (ret_val)
 		goto out;
 
-	if (hw->mac.autoneg) {
-		/*
-		 * Setup autoneg and flow control advertisement
-		 * and perform autonegotiation.
-		 */
-		ret_val = igb_copper_link_autoneg(hw);
-		if (ret_val)
-			goto out;
-	} else {
-		/*
-		 * PHY will be set to 10H, 10F, 100H or 100F
-		 * depending on user settings.
-		 */
-		hw_dbg("Forcing Speed and Duplex\n");
-		ret_val = hw->phy.ops.force_speed_duplex(hw);
-		if (ret_val) {
-			hw_dbg("Error Forcing Speed and Duplex\n");
-			goto out;
-		}
-	}
-
-	/*
-	 * Check link status. Wait up to 100 microseconds for link to become
-	 * valid.
-	 */
-	ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
-	if (ret_val)
-		goto out;
-
-	if (link) {
-		hw_dbg("Valid link established!!!\n");
-		/* Config the MAC and PHY after link is up */
-		igb_config_collision_dist(hw);
-		ret_val = igb_config_fc_after_link_up(hw);
-	} else {
-		hw_dbg("Unable to establish link!!!\n");
-	}
-
+	ret_val = igb_setup_copper_link(hw);
 out:
 	return ret_val;
 }
 
 /**
- *  igb_setup_serdes_link_82575 - Setup link for fiber/serdes
+ *  igb_setup_serdes_link_82575 - Setup link for serdes
  *  @hw: pointer to the HW structure
  *
- *  Configures speed and duplex for fiber and serdes links.
+ *  Configure the physical coding sub-layer (PCS) link.  The PCS link is
+ *  used on copper connections where the serialized gigabit media independent
+ *  interface (sgmii), or serdes fiber is being used.  Configures the link
+ *  for auto-negotiation or forces speed/duplex.
  **/
 static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
 {
-	u32 ctrl_reg, reg;
+	u32 ctrl_ext, ctrl_reg, reg;
+	bool pcs_autoneg;
 
 	if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
 	    !igb_sgmii_active_82575(hw))
@@ -1032,9 +1026,9 @@
 	wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
 
 	/* power on the sfp cage if present */
-	reg = rd32(E1000_CTRL_EXT);
-	reg &= ~E1000_CTRL_EXT_SDP3_DATA;
-	wr32(E1000_CTRL_EXT, reg);
+	ctrl_ext = rd32(E1000_CTRL_EXT);
+	ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+	wr32(E1000_CTRL_EXT, ctrl_ext);
 
 	ctrl_reg = rd32(E1000_CTRL);
 	ctrl_reg |= E1000_CTRL_SLU;
@@ -1051,15 +1045,31 @@
 
 	reg = rd32(E1000_PCS_LCTL);
 
-	if (igb_sgmii_active_82575(hw)) {
-		/* allow time for SFP cage to power up phy */
-		msleep(300);
+	/* default pcs_autoneg to the same setting as mac autoneg */
+	pcs_autoneg = hw->mac.autoneg;
 
-		/* AN time out should be disabled for SGMII mode */
+	switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+	case E1000_CTRL_EXT_LINK_MODE_SGMII:
+		/* sgmii mode lets the phy handle forcing speed/duplex */
+		pcs_autoneg = true;
+		/* autoneg time out should be disabled for SGMII mode */
 		reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
-	} else {
+		break;
+	case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+		/* disable PCS autoneg and support parallel detect only */
+		pcs_autoneg = false;
+	default:
+		/*
+		 * non-SGMII modes only supports a speed of 1000/Full for the
+		 * link so it is best to just force the MAC and let the pcs
+		 * link either autoneg or be forced to 1000/Full
+		 */
 		ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
 		            E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+		/* set speed of 1000/Full if speed/duplex is forced */
+		reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+		break;
 	}
 
 	wr32(E1000_CTRL, ctrl_reg);
@@ -1070,7 +1080,6 @@
 	 * mode that will be compatible with older link partners and switches.
 	 * However, both are supported by the hardware and some drivers/tools.
 	 */
-
 	reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
 		E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
 
@@ -1080,25 +1089,18 @@
 	 */
 	reg |= E1000_PCS_LCTL_FORCE_FCTRL;
 
-	/*
-	 * we always set sgmii to autoneg since it is the phy that will be
-	 * forcing the link and the serdes is just a go-between
-	 */
-	if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) {
+	if (pcs_autoneg) {
 		/* Set PCS register for autoneg */
-		reg |= E1000_PCS_LCTL_FSV_1000 |      /* Force 1000    */
-		       E1000_PCS_LCTL_FDV_FULL |      /* SerDes Full duplex */
-		       E1000_PCS_LCTL_AN_ENABLE |     /* Enable Autoneg */
-		       E1000_PCS_LCTL_AN_RESTART;     /* Restart autoneg */
-		hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);
+		reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+		       E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+		hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
 	} else {
-		/* Set PCS register for forced speed */
-		reg |= E1000_PCS_LCTL_FLV_LINK_UP |   /* Force link up */
-		       E1000_PCS_LCTL_FSV_1000 |      /* Force 1000    */
-		       E1000_PCS_LCTL_FDV_FULL |      /* SerDes Full duplex */
-		       E1000_PCS_LCTL_FSD |           /* Force Speed */
-		       E1000_PCS_LCTL_FORCE_LINK;     /* Force Link */
-		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
+		/* Set PCS register for forced link */
+		reg |= E1000_PCS_LCTL_FSD |        /* Force Speed */
+		       E1000_PCS_LCTL_FORCE_LINK | /* Force Link */
+		       E1000_PCS_LCTL_FLV_LINK_UP; /* Force link value up */
+
+		hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
 	}
 
 	wr32(E1000_PCS_LCTL, reg);
@@ -1167,9 +1169,18 @@
 {
 	s32 ret_val = 0;
 
-	if (igb_check_alt_mac_addr(hw))
-		ret_val = igb_read_mac_addr(hw);
+	/*
+	 * If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = igb_check_alt_mac_addr(hw);
+	if (ret_val)
+		goto out;
 
+	ret_val = igb_read_mac_addr(hw);
+
+out:
 	return ret_val;
 }
 
@@ -1181,61 +1192,59 @@
  **/
 static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	igb_clear_hw_cntrs_base(hw);
 
-	temp = rd32(E1000_PRC64);
-	temp = rd32(E1000_PRC127);
-	temp = rd32(E1000_PRC255);
-	temp = rd32(E1000_PRC511);
-	temp = rd32(E1000_PRC1023);
-	temp = rd32(E1000_PRC1522);
-	temp = rd32(E1000_PTC64);
-	temp = rd32(E1000_PTC127);
-	temp = rd32(E1000_PTC255);
-	temp = rd32(E1000_PTC511);
-	temp = rd32(E1000_PTC1023);
-	temp = rd32(E1000_PTC1522);
+	rd32(E1000_PRC64);
+	rd32(E1000_PRC127);
+	rd32(E1000_PRC255);
+	rd32(E1000_PRC511);
+	rd32(E1000_PRC1023);
+	rd32(E1000_PRC1522);
+	rd32(E1000_PTC64);
+	rd32(E1000_PTC127);
+	rd32(E1000_PTC255);
+	rd32(E1000_PTC511);
+	rd32(E1000_PTC1023);
+	rd32(E1000_PTC1522);
 
-	temp = rd32(E1000_ALGNERRC);
-	temp = rd32(E1000_RXERRC);
-	temp = rd32(E1000_TNCRS);
-	temp = rd32(E1000_CEXTERR);
-	temp = rd32(E1000_TSCTC);
-	temp = rd32(E1000_TSCTFC);
+	rd32(E1000_ALGNERRC);
+	rd32(E1000_RXERRC);
+	rd32(E1000_TNCRS);
+	rd32(E1000_CEXTERR);
+	rd32(E1000_TSCTC);
+	rd32(E1000_TSCTFC);
 
-	temp = rd32(E1000_MGTPRC);
-	temp = rd32(E1000_MGTPDC);
-	temp = rd32(E1000_MGTPTC);
+	rd32(E1000_MGTPRC);
+	rd32(E1000_MGTPDC);
+	rd32(E1000_MGTPTC);
 
-	temp = rd32(E1000_IAC);
-	temp = rd32(E1000_ICRXOC);
+	rd32(E1000_IAC);
+	rd32(E1000_ICRXOC);
 
-	temp = rd32(E1000_ICRXPTC);
-	temp = rd32(E1000_ICRXATC);
-	temp = rd32(E1000_ICTXPTC);
-	temp = rd32(E1000_ICTXATC);
-	temp = rd32(E1000_ICTXQEC);
-	temp = rd32(E1000_ICTXQMTC);
-	temp = rd32(E1000_ICRXDMTC);
+	rd32(E1000_ICRXPTC);
+	rd32(E1000_ICRXATC);
+	rd32(E1000_ICTXPTC);
+	rd32(E1000_ICTXATC);
+	rd32(E1000_ICTXQEC);
+	rd32(E1000_ICTXQMTC);
+	rd32(E1000_ICRXDMTC);
 
-	temp = rd32(E1000_CBTMPC);
-	temp = rd32(E1000_HTDPMC);
-	temp = rd32(E1000_CBRMPC);
-	temp = rd32(E1000_RPTHC);
-	temp = rd32(E1000_HGPTC);
-	temp = rd32(E1000_HTCBDPC);
-	temp = rd32(E1000_HGORCL);
-	temp = rd32(E1000_HGORCH);
-	temp = rd32(E1000_HGOTCL);
-	temp = rd32(E1000_HGOTCH);
-	temp = rd32(E1000_LENERRS);
+	rd32(E1000_CBTMPC);
+	rd32(E1000_HTDPMC);
+	rd32(E1000_CBRMPC);
+	rd32(E1000_RPTHC);
+	rd32(E1000_HGPTC);
+	rd32(E1000_HTCBDPC);
+	rd32(E1000_HGORCL);
+	rd32(E1000_HGORCH);
+	rd32(E1000_HGOTCL);
+	rd32(E1000_HGOTCH);
+	rd32(E1000_LENERRS);
 
 	/* This register should not be read in copper configurations */
 	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
 	    igb_sgmii_active_82575(hw))
-		temp = rd32(E1000_SCVPC);
+		rd32(E1000_SCVPC);
 }
 
 /**
@@ -1400,8 +1409,183 @@
 	wr32(E1000_VT_CTL, vt_ctl);
 }
 
+/**
+ *  igb_read_phy_reg_82580 - Read 82580 MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the MDI control register in the PHY at offset and stores the
+ *  information read to data.
+ **/
+static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	u32 mdicnfg = 0;
+	s32 ret_val;
+
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * We config the phy address in MDICNFG register now. Same bits
+	 * as before. The values in MDIC can be written but will be
+	 * ignored. This allows us to call the old function after
+	 * configuring the PHY address in the new register
+	 */
+	mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT);
+	wr32(E1000_MDICNFG, mdicnfg);
+
+	ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_write_phy_reg_82580 - Write 82580 MDI control register
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write to register at offset
+ *
+ *  Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	u32 mdicnfg = 0;
+	s32 ret_val;
+
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * We config the phy address in MDICNFG register now. Same bits
+	 * as before. The values in MDIC can be written but will be
+	 * ignored. This allows us to call the old function after
+	 * configuring the PHY address in the new register
+	 */
+	mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT);
+	wr32(E1000_MDICNFG, mdicnfg);
+
+	ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+	hw->phy.ops.release(hw);
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_reset_hw_82580 - Reset hardware
+ *  @hw: pointer to the HW structure
+ *
+ *  This resets function or entire device (all ports, etc.)
+ *  to a known state.
+ **/
+static s32 igb_reset_hw_82580(struct e1000_hw *hw)
+{
+	s32 ret_val = 0;
+	/* BH SW mailbox bit in SW_FW_SYNC */
+	u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+	u32 ctrl, icr;
+	bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+
+	hw->dev_spec._82575.global_device_reset = false;
+
+	/* Get current control state. */
+	ctrl = rd32(E1000_CTRL);
+
+	/*
+	 * Prevent the PCI-E bus from sticking if there is no TLP connection
+	 * on the last TLP read/write transaction when MAC is reset.
+	 */
+	ret_val = igb_disable_pcie_master(hw);
+	if (ret_val)
+		hw_dbg("PCI-E Master disable polling has failed.\n");
+
+	hw_dbg("Masking off all interrupts\n");
+	wr32(E1000_IMC, 0xffffffff);
+	wr32(E1000_RCTL, 0);
+	wr32(E1000_TCTL, E1000_TCTL_PSP);
+	wrfl();
+
+	msleep(10);
+
+	/* Determine whether or not a global dev reset is requested */
+	if (global_device_reset &&
+		igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
+			global_device_reset = false;
+
+	if (global_device_reset &&
+		!(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
+		ctrl |= E1000_CTRL_DEV_RST;
+	else
+		ctrl |= E1000_CTRL_RST;
+
+	wr32(E1000_CTRL, ctrl);
+
+	/* Add delay to insure DEV_RST has time to complete */
+	if (global_device_reset)
+		msleep(5);
+
+	ret_val = igb_get_auto_rd_done(hw);
+	if (ret_val) {
+		/*
+		 * When auto config read does not complete, do not
+		 * return with an error. This can happen in situations
+		 * where there is no eeprom and prevents getting link.
+		 */
+		hw_dbg("Auto Read Done did not complete\n");
+	}
+
+	/* If EEPROM is not present, run manual init scripts */
+	if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+		igb_reset_init_script_82575(hw);
+
+	/* clear global device reset status bit */
+	wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+	/* Clear any pending interrupt events. */
+	wr32(E1000_IMC, 0xffffffff);
+	icr = rd32(E1000_ICR);
+
+	/* Install any alternate MAC address into RAR0 */
+	ret_val = igb_check_alt_mac_addr(hw);
+
+	/* Release semaphore */
+	if (global_device_reset)
+		igb_release_swfw_sync_82575(hw, swmbsw_mask);
+
+	return ret_val;
+}
+
+/**
+ *  igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
+ *  @data: data received by reading RXPBS register
+ *
+ *  The 82580 uses a table based approach for packet buffer allocation sizes.
+ *  This function converts the retrieved value into the correct table value
+ *     0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ *  0x0 36  72 144   1   2   4   8  16
+ *  0x8 35  70 140 rsv rsv rsv rsv rsv
+ */
+u16 igb_rxpbs_adjust_82580(u32 data)
+{
+	u16 ret_val = 0;
+
+	if (data < E1000_82580_RXPBS_TABLE_SIZE)
+		ret_val = e1000_82580_rxpbs_table[data];
+
+	return ret_val;
+}
+
 static struct e1000_mac_operations e1000_mac_ops_82575 = {
-	.reset_hw             = igb_reset_hw_82575,
 	.init_hw              = igb_init_hw_82575,
 	.check_for_link       = igb_check_for_link_82575,
 	.rar_set              = igb_rar_set,
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index ebd146f..d51c992 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -38,6 +38,11 @@
 
 #define E1000_RAR_ENTRIES_82575   16
 #define E1000_RAR_ENTRIES_82576   24
+#define E1000_RAR_ENTRIES_82580   24
+
+#define E1000_SW_SYNCH_MB              0x00000100
+#define E1000_STAT_DEV_RST_SET         0x00100000
+#define E1000_CTRL_DEV_RST             0x20000000
 
 /* SRRCTL bit definitions */
 #define E1000_SRRCTL_BSIZEPKT_SHIFT                     10 /* Shift _right_ */
@@ -66,6 +71,8 @@
     E1000_EICR_RX_QUEUE3)
 
 /* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_SIZE_BP     0x00001000  /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_BP     0x00080000  /* Bypass check of ctrl bits */
 
 /* Receive Descriptor - Advanced */
 union e1000_adv_rx_desc {
@@ -98,6 +105,7 @@
 
 #define E1000_RXDADV_HDRBUFLEN_MASK      0x7FE0
 #define E1000_RXDADV_HDRBUFLEN_SHIFT     5
+#define E1000_RXDADV_STAT_TS             0x10000 /* Pkt was time stamped */
 
 /* Transmit Descriptor - Advanced */
 union e1000_adv_tx_desc {
@@ -167,6 +175,18 @@
 #define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
 #define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
 
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE   (1 << 26)
+#define E1000_ETQF_1588            (1 << 30)
+
+/* FTQF register bit definitions */
+#define E1000_FTQF_VF_BP               0x00008000
+#define E1000_FTQF_1588_TIME_STAMP     0x08000000
+#define E1000_FTQF_MASK                0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP       0x10000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
+
+#define E1000_NVM_APME_82575          0x0400
 #define MAX_NUM_VFS                   8
 
 #define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31)  /* global VF LB enable */
@@ -202,9 +222,21 @@
 #define E1000_IOVCTL 0x05BBC
 #define E1000_IOVCTL_REUSE_VFQ 0x00000001
 
+#define E1000_RPLOLR_STRVLAN   0x40000000
+#define E1000_RPLOLR_STRCRC    0x80000000
+
+#define E1000_DTXCTL_8023LL     0x0004
+#define E1000_DTXCTL_VLAN_ADDED 0x0008
+#define E1000_DTXCTL_OOS_ENABLE 0x0010
+#define E1000_DTXCTL_MDP_EN     0x0020
+#define E1000_DTXCTL_SPOOF_INT  0x0040
+
 #define ALL_QUEUES   0xFFFF
 
+/* RX packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576  0x0000007F
 void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
 void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
+u16 igb_rxpbs_adjust_82580(u32 data);
 
 #endif
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index cb91683..6e036ae 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -49,6 +49,7 @@
 #define E1000_CTRL_EXT_PFRSTD    0x00004000
 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
 #define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES  0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX  0x00400000
 #define E1000_CTRL_EXT_LINK_MODE_SGMII   0x00800000
 #define E1000_CTRL_EXT_EIAME          0x01000000
 #define E1000_CTRL_EXT_IRCA           0x00000001
@@ -329,6 +330,7 @@
 #define E1000_ICR_RXDMT0        0x00000010 /* rx desc min. threshold (0) */
 #define E1000_ICR_RXT0          0x00000080 /* rx timer intr (ring 0) */
 #define E1000_ICR_VMMB          0x00000100 /* VM MB event */
+#define E1000_ICR_DRSTA         0x40000000 /* Device Reset Asserted */
 /* If this bit asserted, the driver should claim the interrupt */
 #define E1000_ICR_INT_ASSERTED  0x80000000
 /* LAN connected device generates an interrupt */
@@ -370,6 +372,7 @@
 #define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
 #define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
 #define E1000_IMS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
+#define E1000_IMS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Asserted */
 #define E1000_IMS_DOUTSYNC  E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
 
 /* Extended Interrupt Mask Set */
@@ -378,6 +381,7 @@
 /* Interrupt Cause Set */
 #define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
 #define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
+#define E1000_ICS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Aserted */
 
 /* Extended Interrupt Cause Set */
 
@@ -435,6 +439,39 @@
 /* Flow Control */
 #define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
 
+#define E1000_TSYNCTXCTL_VALID    0x00000001 /* tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED  0x00000010 /* enable tx timestampping */
+
+#define E1000_TSYNCRXCTL_VALID      0x00000001 /* rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK  0x0000000E /* rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2       0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1       0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2    0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL         0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2    0x0A
+#define E1000_TSYNCRXCTL_ENABLED    0x00000010 /* enable rx timestampping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK   0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE       0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE  0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE   0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK               0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE                 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE            0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE       0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE      0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE             0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE           0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE  0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE             0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE           0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE           0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
+
 /* PCI Express Control */
 #define E1000_GCR_CMPL_TMOUT_MASK       0x0000F000
 #define E1000_GCR_CMPL_TMOUT_10ms       0x00001000
@@ -524,8 +561,12 @@
 #define NVM_ALT_MAC_ADDR_PTR       0x0037
 #define NVM_CHECKSUM_REG           0x003F
 
-#define E1000_NVM_CFG_DONE_PORT_0  0x40000 /* MNG config cycle done */
-#define E1000_NVM_CFG_DONE_PORT_1  0x80000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_2  0x100000 /* ...for third port */
+#define E1000_NVM_CFG_DONE_PORT_3  0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
 
 /* Mask bits for fields in Word 0x0f of the NVM */
 #define NVM_WORD0F_PAUSE_MASK       0x3000
@@ -592,6 +633,7 @@
  */
 #define M88E1111_I_PHY_ID    0x01410CC0
 #define IGP03E1000_E_PHY_ID  0x02A80390
+#define I82580_I_PHY_ID      0x015403A0
 #define M88_VENDOR           0x0141
 
 /* M88E1000 Specific Registers */
@@ -678,4 +720,8 @@
 #define E1000_VFTA_ENTRY_MASK                0x7F
 #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK      0x1F
 
+/* DMA Coalescing register fields */
+#define E1000_PCIEMISC_LX_DECISION      0x00000080 /* Lx power decision based
+                                                      on DMA coal */
+
 #endif
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 119869b..dbaeb5f 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -42,20 +42,35 @@
 #define E1000_DEV_ID_82576_SERDES             0x10E7
 #define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82576_NS                 0x150A
+#define E1000_DEV_ID_82576_NS_SERDES          0x1518
 #define E1000_DEV_ID_82576_SERDES_QUAD        0x150D
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
 #define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
+#define E1000_DEV_ID_82580_COPPER             0x150E
+#define E1000_DEV_ID_82580_FIBER              0x150F
+#define E1000_DEV_ID_82580_SERDES             0x1510
+#define E1000_DEV_ID_82580_SGMII              0x1511
+#define E1000_DEV_ID_82580_COPPER_DUAL        0x1516
 
 #define E1000_REVISION_2 2
 #define E1000_REVISION_4 4
 
+#define E1000_FUNC_0     0
 #define E1000_FUNC_1     1
+#define E1000_FUNC_2     2
+#define E1000_FUNC_3     3
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0   0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1   3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2   6
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3   9
 
 enum e1000_mac_type {
 	e1000_undefined = 0,
 	e1000_82575,
 	e1000_82576,
+	e1000_82580,
 	e1000_num_macs  /* List is 1-based, so subtract 1 for true count. */
 };
 
@@ -70,7 +85,6 @@
 	e1000_nvm_unknown = 0,
 	e1000_nvm_none,
 	e1000_nvm_eeprom_spi,
-	e1000_nvm_eeprom_microwire,
 	e1000_nvm_flash_hw,
 	e1000_nvm_flash_sw
 };
@@ -79,8 +93,6 @@
 	e1000_nvm_override_none = 0,
 	e1000_nvm_override_spi_small,
 	e1000_nvm_override_spi_large,
-	e1000_nvm_override_microwire_small,
-	e1000_nvm_override_microwire_large
 };
 
 enum e1000_phy_type {
@@ -92,6 +104,7 @@
 	e1000_phy_gg82563,
 	e1000_phy_igp_3,
 	e1000_phy_ife,
+	e1000_phy_82580,
 };
 
 enum e1000_bus_type {
@@ -288,6 +301,7 @@
 
 struct e1000_phy_operations {
 	s32  (*acquire)(struct e1000_hw *);
+	s32  (*check_polarity)(struct e1000_hw *);
 	s32  (*check_reset_block)(struct e1000_hw *);
 	s32  (*force_speed_duplex)(struct e1000_hw *);
 	s32  (*get_cfg_done)(struct e1000_hw *hw);
@@ -339,6 +353,7 @@
 	u16 ifs_ratio;
 	u16 ifs_step_size;
 	u16 mta_reg_count;
+	u16 uta_reg_count;
 
 	/* Maximum size of the MTA register table in all supported adapters */
 	#define MAX_MTA_REG 128
@@ -463,6 +478,7 @@
 
 struct e1000_dev_spec_82575 {
 	bool sgmii_active;
+	bool global_device_reset;
 };
 
 struct e1000_hw {
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 7d76bb0..2ad358a 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -185,13 +185,12 @@
 	}
 
 	if (nvm_alt_mac_addr_offset == 0xFFFF) {
-		ret_val = -(E1000_NOT_IMPLEMENTED);
+		/* There is no Alternate MAC Address */
 		goto out;
 	}
 
 	if (hw->bus.func == E1000_FUNC_1)
-		nvm_alt_mac_addr_offset += ETH_ALEN/sizeof(u16);
-
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
 	for (i = 0; i < ETH_ALEN; i += 2) {
 		offset = nvm_alt_mac_addr_offset + (i >> 1);
 		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
@@ -206,14 +205,16 @@
 
 	/* if multicast bit is set, the alternate address will not be used */
 	if (alt_mac_addr[0] & 0x01) {
-		ret_val = -(E1000_NOT_IMPLEMENTED);
+		hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
 		goto out;
 	}
 
-	for (i = 0; i < ETH_ALEN; i++)
-		hw->mac.addr[i] = hw->mac.perm_addr[i] = alt_mac_addr[i];
-
-	hw->mac.ops.rar_set(hw, hw->mac.perm_addr, 0);
+	/*
+	 * We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
 
 out:
 	return ret_val;
@@ -246,8 +247,15 @@
 	if (rar_low || rar_high)
 		rar_high |= E1000_RAH_AV;
 
+	/*
+	 * Some bridges will combine consecutive 32-bit writes into
+	 * a single burst write, which will malfunction on some parts.
+	 * The flushes avoid this.
+	 */
 	wr32(E1000_RAL(index), rar_low);
+	wrfl();
 	wr32(E1000_RAH(index), rar_high);
+	wrfl();
 }
 
 /**
@@ -399,45 +407,43 @@
  **/
 void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
 {
-	u32 temp;
-
-	temp = rd32(E1000_CRCERRS);
-	temp = rd32(E1000_SYMERRS);
-	temp = rd32(E1000_MPC);
-	temp = rd32(E1000_SCC);
-	temp = rd32(E1000_ECOL);
-	temp = rd32(E1000_MCC);
-	temp = rd32(E1000_LATECOL);
-	temp = rd32(E1000_COLC);
-	temp = rd32(E1000_DC);
-	temp = rd32(E1000_SEC);
-	temp = rd32(E1000_RLEC);
-	temp = rd32(E1000_XONRXC);
-	temp = rd32(E1000_XONTXC);
-	temp = rd32(E1000_XOFFRXC);
-	temp = rd32(E1000_XOFFTXC);
-	temp = rd32(E1000_FCRUC);
-	temp = rd32(E1000_GPRC);
-	temp = rd32(E1000_BPRC);
-	temp = rd32(E1000_MPRC);
-	temp = rd32(E1000_GPTC);
-	temp = rd32(E1000_GORCL);
-	temp = rd32(E1000_GORCH);
-	temp = rd32(E1000_GOTCL);
-	temp = rd32(E1000_GOTCH);
-	temp = rd32(E1000_RNBC);
-	temp = rd32(E1000_RUC);
-	temp = rd32(E1000_RFC);
-	temp = rd32(E1000_ROC);
-	temp = rd32(E1000_RJC);
-	temp = rd32(E1000_TORL);
-	temp = rd32(E1000_TORH);
-	temp = rd32(E1000_TOTL);
-	temp = rd32(E1000_TOTH);
-	temp = rd32(E1000_TPR);
-	temp = rd32(E1000_TPT);
-	temp = rd32(E1000_MPTC);
-	temp = rd32(E1000_BPTC);
+	rd32(E1000_CRCERRS);
+	rd32(E1000_SYMERRS);
+	rd32(E1000_MPC);
+	rd32(E1000_SCC);
+	rd32(E1000_ECOL);
+	rd32(E1000_MCC);
+	rd32(E1000_LATECOL);
+	rd32(E1000_COLC);
+	rd32(E1000_DC);
+	rd32(E1000_SEC);
+	rd32(E1000_RLEC);
+	rd32(E1000_XONRXC);
+	rd32(E1000_XONTXC);
+	rd32(E1000_XOFFRXC);
+	rd32(E1000_XOFFTXC);
+	rd32(E1000_FCRUC);
+	rd32(E1000_GPRC);
+	rd32(E1000_BPRC);
+	rd32(E1000_MPRC);
+	rd32(E1000_GPTC);
+	rd32(E1000_GORCL);
+	rd32(E1000_GORCH);
+	rd32(E1000_GOTCL);
+	rd32(E1000_GOTCH);
+	rd32(E1000_RNBC);
+	rd32(E1000_RUC);
+	rd32(E1000_RFC);
+	rd32(E1000_ROC);
+	rd32(E1000_RJC);
+	rd32(E1000_TORL);
+	rd32(E1000_TORH);
+	rd32(E1000_TOTL);
+	rd32(E1000_TOTH);
+	rd32(E1000_TPR);
+	rd32(E1000_TPT);
+	rd32(E1000_MPTC);
+	rd32(E1000_BPTC);
 }
 
 /**
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index ed9058e..c474cdb 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -143,12 +143,16 @@
 	if (!countdown || !mbx->ops.check_for_msg)
 		goto out;
 
-	while (mbx->ops.check_for_msg(hw, mbx_id)) {
+	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
 		countdown--;
 		if (!countdown)
 			break;
 		udelay(mbx->usec_delay);
 	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
 out:
 	return countdown ? 0 : -E1000_ERR_MBX;
 }
@@ -168,12 +172,16 @@
 	if (!countdown || !mbx->ops.check_for_ack)
 		goto out;
 
-	while (mbx->ops.check_for_ack(hw, mbx_id)) {
+	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
 		countdown--;
 		if (!countdown)
 			break;
 		udelay(mbx->usec_delay);
 	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
 out:
 	return countdown ? 0 : -E1000_ERR_MBX;
 }
@@ -217,12 +225,13 @@
 static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
 	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = 0;
+	s32 ret_val = -E1000_ERR_MBX;
 
-	if (!mbx->ops.write)
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
 		goto out;
 
-	/* send msg*/
+	/* send msg */
 	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
 
 	/* if msg sent wait until we receive an ack */
@@ -305,6 +314,30 @@
 }
 
 /**
+ *  igb_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+	u32 p2v_mailbox;
+
+
+	/* Take ownership of the buffer */
+	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
+	if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+		ret_val = 0;
+
+	return ret_val;
+}
+
+/**
  *  igb_write_mbx_pf - Places a message in the mailbox
  *  @hw: pointer to the HW structure
  *  @msg: The message buffer
@@ -316,27 +349,17 @@
 static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
                               u16 vf_number)
 {
-	u32 p2v_mailbox;
-	s32 ret_val = 0;
+	s32 ret_val;
 	u16 i;
 
-	/* Take ownership of the buffer */
-	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
-
-	/* Make sure we have ownership now... */
-	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
-	if (!(p2v_mailbox & E1000_P2VMAILBOX_PFU)) {
-		/* failed to grab ownership */
-		ret_val = -E1000_ERR_MBX;
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
 		goto out_no_write;
-	}
 
-	/*
-	 * flush any ack or msg which may already be in the queue
-	 * as they are likely the result of an error
-	 */
-	igb_check_for_ack_pf(hw, vf_number);
+	/* flush msg and acks as we are overwriting the message buffer */
 	igb_check_for_msg_pf(hw, vf_number);
+	igb_check_for_ack_pf(hw, vf_number);
 
 	/* copy the caller specified message to the mailbox memory buffer */
 	for (i = 0; i < size; i++)
@@ -367,20 +390,13 @@
 static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
                              u16 vf_number)
 {
-	u32 p2v_mailbox;
-	s32 ret_val = 0;
+	s32 ret_val;
 	u16 i;
 
-	/* Take ownership of the buffer */
-	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
-
-	/* Make sure we have ownership now... */
-	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
-	if (!(p2v_mailbox & E1000_P2VMAILBOX_PFU)) {
-		/* failed to grab ownership */
-		ret_val = -E1000_ERR_MBX;
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
 		goto out_no_read;
-	}
 
 	/* copy the message to the mailbox memory buffer */
 	for (i = 0; i < size; i++)
@@ -392,8 +408,6 @@
 	/* update stats */
 	hw->mbx.stats.msgs_rx++;
 
-	ret_val = 0;
-
 out_no_read:
 	return ret_val;
 }
diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/igb/e1000_mbx.h
index ebc02ea..bb112fb 100644
--- a/drivers/net/igb/e1000_mbx.h
+++ b/drivers/net/igb/e1000_mbx.h
@@ -58,10 +58,12 @@
 #define E1000_VT_MSGINFO_MASK     (0xFF << E1000_VT_MSGINFO_SHIFT)
 
 #define E1000_VF_RESET            0x01 /* VF requests reset */
-#define E1000_VF_SET_MAC_ADDR     0x02 /* VF requests PF to set MAC addr */
-#define E1000_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
-#define E1000_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
-#define E1000_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
+#define E1000_VF_SET_MAC_ADDR     0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST    0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_VLAN         0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_LPE          0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC      0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_MULTICAST    (0x02 << E1000_VT_MSGINFO_SHIFT)
 
 #define E1000_PF_CONTROL_MSG      0x0100 /* PF control message */
 
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c
index a88bfe2..d83b77fa 100644
--- a/drivers/net/igb/e1000_nvm.c
+++ b/drivers/net/igb/e1000_nvm.c
@@ -78,9 +78,7 @@
 	u32 mask;
 
 	mask = 0x01 << (count - 1);
-	if (nvm->type == e1000_nvm_eeprom_microwire)
-		eecd &= ~E1000_EECD_DO;
-	else if (nvm->type == e1000_nvm_eeprom_spi)
+	if (nvm->type == e1000_nvm_eeprom_spi)
 		eecd |= E1000_EECD_DO;
 
 	do {
@@ -220,22 +218,7 @@
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	u32 eecd = rd32(E1000_EECD);
 
-	if (nvm->type == e1000_nvm_eeprom_microwire) {
-		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-		wr32(E1000_EECD, eecd);
-		wrfl();
-		udelay(nvm->delay_usec);
-
-		igb_raise_eec_clk(hw, &eecd);
-
-		/* Select EEPROM */
-		eecd |= E1000_EECD_CS;
-		wr32(E1000_EECD, eecd);
-		wrfl();
-		udelay(nvm->delay_usec);
-
-		igb_lower_eec_clk(hw, &eecd);
-	} else if (nvm->type == e1000_nvm_eeprom_spi) {
+	if (nvm->type == e1000_nvm_eeprom_spi) {
 		/* Toggle CS to flush commands */
 		eecd |= E1000_EECD_CS;
 		wr32(E1000_EECD, eecd);
@@ -263,12 +246,6 @@
 		/* Pull CS high */
 		eecd |= E1000_EECD_CS;
 		igb_lower_eec_clk(hw, &eecd);
-	} else if (hw->nvm.type == e1000_nvm_eeprom_microwire) {
-		/* CS on Microcwire is active-high */
-		eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
-		wr32(E1000_EECD, eecd);
-		igb_raise_eec_clk(hw, &eecd);
-		igb_lower_eec_clk(hw, &eecd);
 	}
 }
 
@@ -304,14 +281,7 @@
 	u8 spi_stat_reg;
 
 
-	if (nvm->type == e1000_nvm_eeprom_microwire) {
-		/* Clear SK and DI */
-		eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
-		wr32(E1000_EECD, eecd);
-		/* Set CS */
-		eecd |= E1000_EECD_CS;
-		wr32(E1000_EECD, eecd);
-	} else if (nvm->type == e1000_nvm_eeprom_spi) {
+	if (nvm->type == e1000_nvm_eeprom_spi) {
 		/* Clear SK and CS */
 		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
 		wr32(E1000_EECD, eecd);
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index ee46060..5c9d73e 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -39,6 +39,9 @@
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
 	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+                (sizeof(e1000_m88_cable_length_table) / \
+                 sizeof(e1000_m88_cable_length_table[0]))
 
 static const u16 e1000_igp_2_cable_length_table[] =
     { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
@@ -109,7 +112,10 @@
  **/
 static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
 {
-	s32 ret_val;
+	s32 ret_val = 0;
+
+	if (!(hw->phy.ops.write_reg))
+		goto out;
 
 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
 	if (ret_val)
@@ -130,7 +136,7 @@
  *  Reads the MDI control regsiter in the PHY at offset and stores the
  *  information read to data.
  **/
-static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	u32 i, mdic = 0;
@@ -188,7 +194,7 @@
  *
  *  Writes data to MDI control register in the PHY at offset.
  **/
-static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	u32 i, mdic = 0;
@@ -239,6 +245,103 @@
 }
 
 /**
+ *  igb_read_phy_reg_i2c - Read PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the i2c interface and stores the
+ *  retrieved information in data.
+ **/
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+
+
+	/*
+	 * Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+	          (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+	          (E1000_I2CCMD_OPCODE_READ));
+
+	wr32(E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		udelay(50);
+		i2ccmd = rd32(E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		hw_dbg("I2CCMD Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		hw_dbg("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	/* Need to byte-swap the 16-bit value. */
+	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+	return 0;
+}
+
+/**
+ *  igb_write_phy_reg_i2c - Write PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+	u16 phy_data_swapped;
+
+
+	/* Swap the data bytes for the I2C interface */
+	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+	/*
+	 * Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+	          (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+	          E1000_I2CCMD_OPCODE_WRITE |
+	          phy_data_swapped);
+
+	wr32(E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		udelay(50);
+		i2ccmd = rd32(E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		hw_dbg("I2CCMD Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		hw_dbg("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
  *  igb_read_phy_reg_igp - Read igp PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
@@ -318,6 +421,57 @@
 }
 
 /**
+ *  igb_copper_link_setup_82580 - Setup 82580 PHY for copper link
+ *  @hw: pointer to the HW structure
+ *
+ *  Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+
+
+	if (phy->reset_disable) {
+		ret_val = 0;
+		goto out;
+	}
+
+	if (phy->type == e1000_phy_82580) {
+		ret_val = hw->phy.ops.reset(hw);
+		if (ret_val) {
+			hw_dbg("Error resetting the PHY.\n");
+			goto out;
+		}
+	}
+
+	/* Enable CRS on TX. This must be set for half-duplex operation. */
+	ret_val = phy->ops.read_reg(hw, I82580_CFG_REG, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data |= I82580_CFG_ASSERT_CRS_ON_TX;
+
+	/* Enable downshift */
+	phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
+
+	ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
+	if (ret_val)
+		goto out;
+
+	/* Set number of link attempts before downshift */
+	ret_val = phy->ops.read_reg(hw, I82580_CTRL_REG, &phy_data);
+	if (ret_val)
+		goto out;
+	phy_data &= ~I82580_CTRL_DOWNSHIFT_MASK;
+	ret_val = phy->ops.write_reg(hw, I82580_CTRL_REG, phy_data);
+
+out:
+	return ret_val;
+}
+
+/**
  *  igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
  *  @hw: pointer to the HW structure
  *
@@ -572,7 +726,7 @@
  *  and restart the negotiation process between the link partner.  If
  *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
  **/
-s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -796,6 +950,65 @@
 }
 
 /**
+ *  igb_setup_copper_link - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	bool link;
+
+
+	if (hw->mac.autoneg) {
+		/*
+		 * Setup autoneg and flow control advertisement and perform
+		 * autonegotiation.
+		 */
+		ret_val = igb_copper_link_autoneg(hw);
+		if (ret_val)
+			goto out;
+	} else {
+		/*
+		 * PHY will be set to 10H, 10F, 100H or 100F
+		 * depending on user settings.
+		 */
+		hw_dbg("Forcing Speed and Duplex\n");
+		ret_val = hw->phy.ops.force_speed_duplex(hw);
+		if (ret_val) {
+			hw_dbg("Error Forcing Speed and Duplex\n");
+			goto out;
+		}
+	}
+
+	/*
+	 * Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	ret_val = igb_phy_has_link(hw,
+	                           COPPER_LINK_UP_LIMIT,
+	                           10,
+	                           &link);
+	if (ret_val)
+		goto out;
+
+	if (link) {
+		hw_dbg("Valid link established!!!\n");
+		igb_config_collision_dist(hw);
+		ret_val = igb_config_fc_after_link_up(hw);
+	} else {
+		hw_dbg("Unable to establish link!!!\n");
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
  *  @hw: pointer to the HW structure
  *
@@ -903,22 +1116,19 @@
 
 	igb_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	/* Reset the phy to commit changes. */
-	phy_data |= MII_CR_RESET;
-
 	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
-	udelay(1);
+	/* Reset the phy to commit changes. */
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val)
+		goto out;
 
 	if (phy->autoneg_wait_to_complete) {
 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
-		ret_val = igb_phy_has_link(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
 		if (ret_val)
 			goto out;
 
@@ -928,8 +1138,8 @@
 			 * Reset the DSP and cross our fingers.
 			 */
 			ret_val = phy->ops.write_reg(hw,
-						      M88E1000_PHY_PAGE_SELECT,
-						      0x001d);
+						     M88E1000_PHY_PAGE_SELECT,
+						     0x001d);
 			if (ret_val)
 				goto out;
 			ret_val = igb_phy_reset_dsp(hw);
@@ -939,7 +1149,7 @@
 
 		/* Try once more */
 		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
-					     100000, &link);
+					   100000, &link);
 		if (ret_val)
 			goto out;
 	}
@@ -1051,9 +1261,12 @@
 s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 data;
 
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
 	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
 	if (ret_val)
 		goto out;
@@ -1288,8 +1501,14 @@
 		 * it across the board.
 		 */
 		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
-		if (ret_val)
-			break;
+		if (ret_val) {
+			/*
+			 * If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			udelay(usec_interval);
+		}
 		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
 			break;
@@ -1333,8 +1552,13 @@
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
 		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
-	phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
@@ -1715,3 +1939,194 @@
 	return 0;
 }
 
+/**
+ *  igb_check_polarity_82580 - Checks the polarity.
+ *  @hw: pointer to the HW structure
+ *
+ *  Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ *  Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+
+
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+
+	if (!ret_val)
+		phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY)
+		                      ? e1000_rev_polarity_reversed
+		                      : e1000_rev_polarity_normal;
+
+	return ret_val;
+}
+
+/**
+ *  igb_phy_force_speed_duplex_82580 - Force speed/duplex for I82580 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the PHY setup function to force speed and duplex.  Clears the
+ *  auto-crossover to force MDI manually.  Waits for link and returns
+ *  successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data;
+	bool link;
+
+
+	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+	if (ret_val)
+		goto out;
+
+	igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+	if (ret_val)
+		goto out;
+
+	/*
+	 * Clear Auto-Crossover to force MDI manually.  82580 requires MDI
+	 * forced whenever speed and duplex are forced.
+	 */
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+	if (ret_val)
+		goto out;
+
+	phy_data &= ~I82580_PHY_CTRL2_AUTO_MDIX;
+	phy_data &= ~I82580_PHY_CTRL2_FORCE_MDI_MDIX;
+
+	ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+	if (ret_val)
+		goto out;
+
+	hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);
+
+	udelay(1);
+
+	if (phy->autoneg_wait_to_complete) {
+		hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");
+
+		ret_val = igb_phy_has_link(hw,
+		                           PHY_FORCE_LIMIT,
+		                           100000,
+		                           &link);
+		if (ret_val)
+			goto out;
+
+		if (!link)
+			hw_dbg("Link taking longer than expected.\n");
+
+		/* Try once more */
+		ret_val = igb_phy_has_link(hw,
+		                           PHY_FORCE_LIMIT,
+		                           100000,
+		                           &link);
+		if (ret_val)
+			goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_phy_info_82580 - Retrieve I82580 PHY information
+ *  @hw: pointer to the HW structure
+ *
+ *  Read PHY status to determine if link is up.  If link is up, then
+ *  set/determine 10base-T extended distance and polarity correction.  Read
+ *  PHY port status to determine MDI/MDIx and speed.  Based on the speed,
+ *  determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 data;
+	bool link;
+
+
+	ret_val = igb_phy_has_link(hw, 1, 0, &link);
+	if (ret_val)
+		goto out;
+
+	if (!link) {
+		hw_dbg("Phy info is only valid if link is up\n");
+		ret_val = -E1000_ERR_CONFIG;
+		goto out;
+	}
+
+	phy->polarity_correction = true;
+
+	ret_val = igb_check_polarity_82580(hw);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+	if (ret_val)
+		goto out;
+
+	phy->is_mdix = (data & I82580_PHY_STATUS2_MDIX) ? true : false;
+
+	if ((data & I82580_PHY_STATUS2_SPEED_MASK) ==
+	    I82580_PHY_STATUS2_SPEED_1000MBPS) {
+		ret_val = hw->phy.ops.get_cable_length(hw);
+		if (ret_val)
+			goto out;
+
+		ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+		if (ret_val)
+			goto out;
+
+		phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+		                ? e1000_1000t_rx_status_ok
+		                : e1000_1000t_rx_status_not_ok;
+
+		phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+		                 ? e1000_1000t_rx_status_ok
+		                 : e1000_1000t_rx_status_not_ok;
+	} else {
+		phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+		phy->local_rx = e1000_1000t_rx_status_undefined;
+		phy->remote_rx = e1000_1000t_rx_status_undefined;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  igb_get_cable_length_82580 - Determine cable length for 82580 PHY
+ *  @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 igb_get_cable_length_82580(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val;
+	u16 phy_data, length;
+
+
+	ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data);
+	if (ret_val)
+		goto out;
+
+	length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >>
+	         I82580_DSTATUS_CABLE_LENGTH_SHIFT;
+
+	if (length == E1000_CABLE_LENGTH_UNDEFINED)
+		ret_val = -E1000_ERR_PHY;
+
+	phy->cable_length = length;
+
+out:
+	return ret_val;
+}
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
index ebe4b61..555eb54 100644
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/igb/e1000_phy.h
@@ -43,7 +43,6 @@
 
 s32  igb_check_downshift(struct e1000_hw *hw);
 s32  igb_check_reset_block(struct e1000_hw *hw);
-s32  igb_copper_link_autoneg(struct e1000_hw *hw);
 s32  igb_copper_link_setup_igp(struct e1000_hw *hw);
 s32  igb_copper_link_setup_m88(struct e1000_hw *hw);
 s32  igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
@@ -57,10 +56,19 @@
 s32  igb_phy_hw_reset(struct e1000_hw *hw);
 s32  igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
 s32  igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32  igb_setup_copper_link(struct e1000_hw *hw);
 s32  igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
 				u32 usec_interval, bool *success);
 s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+s32  igb_copper_link_setup_82580(struct e1000_hw *hw);
+s32  igb_get_phy_info_82580(struct e1000_hw *hw);
+s32  igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
+s32  igb_get_cable_length_82580(struct e1000_hw *hw);
 
 /* IGP01E1000 Specific Registers */
 #define IGP01E1000_PHY_PORT_CONFIG        0x10 /* Port Config */
@@ -75,6 +83,33 @@
 #define IGP01E1000_PSCR_FORCE_MDI_MDIX    0x2000 /* 0=MDI, 1=MDIX */
 #define IGP01E1000_PSCFR_SMART_SPEED      0x0080
 
+#define I82580_ADDR_REG                   16
+#define I82580_CFG_REG                    22
+#define I82580_CFG_ASSERT_CRS_ON_TX       (1 << 15)
+#define I82580_CFG_ENABLE_DOWNSHIFT       (3 << 10) /* auto downshift 100/10 */
+#define I82580_CTRL_REG                   23
+#define I82580_CTRL_DOWNSHIFT_MASK        (7 << 10)
+
+/* 82580 specific PHY registers */
+#define I82580_PHY_CTRL_2            18
+#define I82580_PHY_LBK_CTRL          19
+#define I82580_PHY_STATUS_2          26
+#define I82580_PHY_DIAG_STATUS       31
+
+/* I82580 PHY Status 2 */
+#define I82580_PHY_STATUS2_REV_POLARITY   0x0400
+#define I82580_PHY_STATUS2_MDIX           0x0800
+#define I82580_PHY_STATUS2_SPEED_MASK     0x0300
+#define I82580_PHY_STATUS2_SPEED_1000MBPS 0x0200
+#define I82580_PHY_STATUS2_SPEED_100MBPS  0x0100
+
+/* I82580 PHY Control 2 */
+#define I82580_PHY_CTRL2_AUTO_MDIX        0x0400
+#define I82580_PHY_CTRL2_FORCE_MDI_MDIX   0x0200
+
+/* I82580 PHY Diagnostics Status */
+#define I82580_DSTATUS_CABLE_LENGTH       0x03FC
+#define I82580_DSTATUS_CABLE_LENGTH_SHIFT 2
 /* Enable flexible speed on link-up */
 #define IGP02E1000_PM_D0_LPLU             0x0002 /* For D0a states */
 #define IGP02E1000_PM_D3_LPLU             0x0004 /* For all other states */
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 345d144..dd4e6ff 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -34,6 +34,7 @@
 #define E1000_EERD     0x00014  /* EEPROM Read - RW */
 #define E1000_CTRL_EXT 0x00018  /* Extended Device Control - RW */
 #define E1000_MDIC     0x00020  /* MDI Control - RW */
+#define E1000_MDICNFG  0x00E04  /* MDI Config - RW */
 #define E1000_SCTL     0x00024  /* SerDes Control - RW */
 #define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
 #define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
@@ -76,59 +77,20 @@
 #define E1000_FCRTV    0x02460  /* Flow Control Refresh Timer Value - RW */
 
 /* IEEE 1588 TIMESYNCH */
-#define E1000_TSYNCTXCTL 0x0B614
-#define E1000_TSYNCTXCTL_VALID (1<<0)
-#define E1000_TSYNCTXCTL_ENABLED (1<<4)
-#define E1000_TSYNCRXCTL 0x0B620
-#define E1000_TSYNCRXCTL_VALID (1<<0)
-#define E1000_TSYNCRXCTL_ENABLED (1<<4)
-enum {
-	E1000_TSYNCRXCTL_TYPE_L2_V2 = 0,
-	E1000_TSYNCRXCTL_TYPE_L4_V1 = (1<<1),
-	E1000_TSYNCRXCTL_TYPE_L2_L4_V2 = (1<<2),
-	E1000_TSYNCRXCTL_TYPE_ALL = (1<<3),
-	E1000_TSYNCRXCTL_TYPE_EVENT_V2 = (1<<3) | (1<<1),
-};
-#define E1000_TSYNCRXCFG 0x05F50
-enum {
-	E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE = 0<<0,
-	E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE = 1<<0,
-	E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE = 2<<0,
-	E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE = 3<<0,
-	E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE = 4<<0,
-
-	E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE = 0<<8,
-	E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE = 1<<8,
-	E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE = 2<<8,
-	E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE = 3<<8,
-	E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE = 8<<8,
-	E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE = 9<<8,
-	E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE = 0xA<<8,
-	E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE = 0xB<<8,
-	E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE = 0xC<<8,
-	E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE = 0xD<<8,
-};
-#define E1000_SYSTIML 0x0B600
-#define E1000_SYSTIMH 0x0B604
-#define E1000_TIMINCA 0x0B608
-
-#define E1000_RXMTRL     0x0B634
-#define E1000_RXSTMPL 0x0B624
-#define E1000_RXSTMPH 0x0B628
-#define E1000_RXSATRL 0x0B62C
-#define E1000_RXSATRH 0x0B630
-
-#define E1000_TXSTMPL 0x0B618
-#define E1000_TXSTMPH 0x0B61C
-
-#define E1000_ETQF0   0x05CB0
-#define E1000_ETQF1   0x05CB4
-#define E1000_ETQF2   0x05CB8
-#define E1000_ETQF3   0x05CBC
-#define E1000_ETQF4   0x05CC0
-#define E1000_ETQF5   0x05CC4
-#define E1000_ETQF6   0x05CC8
-#define E1000_ETQF7   0x05CCC
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL    0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH    0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL    0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH    0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL    0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH    0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML    0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH    0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA    0x0B608 /* Increment attributes register - RW */
+#define E1000_TSAUXC     0x0B640 /* Timesync Auxiliary Control register */
+#define E1000_SYSTIMR    0x0B6F8 /* System time register Residue */
 
 /* Filtering Registers */
 #define E1000_SAQF(_n) (0x5980 + 4 * (_n))
@@ -143,7 +105,9 @@
 #define E1000_ETQF(_n)  (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
 
 #define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
+
 /* Split and Replication RX Control - RW */
+#define E1000_RXPBS    0x02404  /* Rx Packet Buffer Size - RW */
 /*
  * Convenience macros
  *
@@ -288,10 +252,17 @@
 #define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
 #define E1000_RA       0x05400  /* Receive Address - RW Array */
 #define E1000_RA2      0x054E0  /* 2nd half of receive address array - RW Array */
+#define E1000_PSRTYPE(_i)       (0x05480 + ((_i) * 4))
 #define E1000_RAL(_i)  (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
                                        (0x054E0 + ((_i - 16) * 8)))
 #define E1000_RAH(_i)  (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
                                        (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i)     (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i)     (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i)      (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i)      (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i)      (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i)      (0x05F00 + ((_i) * 8))
 #define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
 #define E1000_VT_CTL   0x0581C  /* VMDq Control - RW */
 #define E1000_WUC      0x05800  /* Wakeup Control - RW */
@@ -331,6 +302,7 @@
 #define E1000_QDE       0x02408 /* Queue Drop Enable - RW */
 #define E1000_DTXSWC    0x03500 /* DMA Tx Switch Control - RW */
 #define E1000_RPLOLR    0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA       0x0A000 /* Unicast Table Array - RW */
 #define E1000_IOVTCL    0x05BBC /* IOV Control Register */
 /* These act per VF so an array friendly macro is used */
 #define E1000_P2VMAILBOX(_n)   (0x00C00 + (4 * (_n)))
@@ -348,4 +320,6 @@
 #define array_rd32(reg, offset) \
 	(readl(hw->hw_addr + reg + ((offset) << 2)))
 
+/* DMA Coalescing registers */
+#define E1000_PCIEMISC          0x05BB8 /* PCIE misc config register */
 #endif
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 7126fea..b1c1eb8 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -55,12 +55,14 @@
 #define IGB_DEFAULT_ITR                    3 /* dynamic */
 #define IGB_MAX_ITR_USECS              10000
 #define IGB_MIN_ITR_USECS                 10
+#define NON_Q_VECTORS                      1
+#define MAX_Q_VECTORS                      8
 
 /* Transmit and receive queues */
-#define IGB_MAX_RX_QUEUES     (adapter->vfs_allocated_count ? \
-                               (adapter->vfs_allocated_count > 6 ? 1 : 2) : 4)
-#define IGB_MAX_TX_QUEUES     IGB_MAX_RX_QUEUES
-#define IGB_ABS_MAX_TX_QUEUES     4
+#define IGB_MAX_RX_QUEUES                  (adapter->vfs_allocated_count ? 2 : \
+                                           (hw->mac.type > e1000_82575 ? 8 : 4))
+#define IGB_ABS_MAX_TX_QUEUES              8
+#define IGB_MAX_TX_QUEUES                  IGB_MAX_RX_QUEUES
 
 #define IGB_MAX_VF_MC_ENTRIES              30
 #define IGB_MAX_VF_FUNCTIONS               8
@@ -71,9 +73,14 @@
 	u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
 	u16 num_vf_mc_hashes;
 	u16 vlans_enabled;
-	bool clear_to_send;
+	u32 flags;
+	unsigned long last_nack;
 };
 
+#define IGB_VF_FLAG_CTS            0x00000001 /* VF is clear to send data */
+#define IGB_VF_FLAG_UNI_PROMISC    0x00000002 /* VF has unicast promisc */
+#define IGB_VF_FLAG_MULTI_PROMISC  0x00000004 /* VF has multicast promisc */
+
 /* RX descriptor control thresholds.
  * PTHRESH - MAC will consider prefetch if it has fewer than this number of
  *           descriptors available in its onboard memory.
@@ -85,17 +92,19 @@
  *           descriptors until either it has this many to write back, or the
  *           ITR timer expires.
  */
-#define IGB_RX_PTHRESH                    16
+#define IGB_RX_PTHRESH                    (hw->mac.type <= e1000_82576 ? 16 : 8)
 #define IGB_RX_HTHRESH                     8
 #define IGB_RX_WTHRESH                     1
+#define IGB_TX_PTHRESH                     8
+#define IGB_TX_HTHRESH                     1
+#define IGB_TX_WTHRESH                     ((hw->mac.type == e1000_82576 && \
+                                             adapter->msix_entries) ? 0 : 16)
 
 /* this is the size past which hardware will drop packets when setting LPE=0 */
 #define MAXIMUM_ETHERNET_VLAN_SIZE 1522
 
 /* Supported Rx Buffer Sizes */
 #define IGB_RXBUFFER_128   128    /* Used for packet split */
-#define IGB_RXBUFFER_256   256    /* Used for packet split */
-#define IGB_RXBUFFER_512   512
 #define IGB_RXBUFFER_1024  1024
 #define IGB_RXBUFFER_2048  2048
 #define IGB_RXBUFFER_16384 16384
@@ -128,12 +137,13 @@
 			unsigned long time_stamp;
 			u16 length;
 			u16 next_to_watch;
+			u16 mapped_as_page;
 		};
 		/* RX */
 		struct {
 			struct page *page;
-			u64 page_dma;
-			unsigned int page_offset;
+			dma_addr_t page_dma;
+			u16 page_offset;
 		};
 	};
 };
@@ -141,36 +151,55 @@
 struct igb_tx_queue_stats {
 	u64 packets;
 	u64 bytes;
+	u64 restart_queue;
 };
 
 struct igb_rx_queue_stats {
 	u64 packets;
 	u64 bytes;
 	u64 drops;
+	u64 csum_err;
+	u64 alloc_failed;
+};
+
+struct igb_q_vector {
+	struct igb_adapter *adapter; /* backlink */
+	struct igb_ring *rx_ring;
+	struct igb_ring *tx_ring;
+	struct napi_struct napi;
+
+	u32 eims_value;
+	u16 cpu;
+
+	u16 itr_val;
+	u8 set_itr;
+	u8 itr_shift;
+	void __iomem *itr_register;
+
+	char name[IFNAMSIZ + 9];
 };
 
 struct igb_ring {
-	struct igb_adapter *adapter; /* backlink */
-	void *desc;                  /* descriptor ring memory */
-	dma_addr_t dma;              /* phys address of the ring */
-	unsigned int size;           /* length of desc. ring in bytes */
-	unsigned int count;          /* number of desc. in the ring */
+	struct igb_q_vector *q_vector; /* backlink to q_vector */
+	struct net_device *netdev;     /* back pointer to net_device */
+	struct pci_dev *pdev;          /* pci device for dma mapping */
+	dma_addr_t dma;                /* phys address of the ring */
+	void *desc;                    /* descriptor ring memory */
+	unsigned int size;             /* length of desc. ring in bytes */
+	u16 count;                     /* number of desc. in the ring */
 	u16 next_to_use;
 	u16 next_to_clean;
-	u16 head;
-	u16 tail;
+	u8 queue_index;
+	u8 reg_idx;
+	void __iomem *head;
+	void __iomem *tail;
 	struct igb_buffer *buffer_info; /* array of buffer info structs */
 
-	u32 eims_value;
-	u32 itr_val;
-	u16 itr_register;
-	u16 cpu;
-
-	u16 queue_index;
-	u16 reg_idx;
 	unsigned int total_bytes;
 	unsigned int total_packets;
 
+	u32 flags;
+
 	union {
 		/* TX */
 		struct {
@@ -180,16 +209,18 @@
 		/* RX */
 		struct {
 			struct igb_rx_queue_stats rx_stats;
-			u64 rx_queue_drops;
-			struct napi_struct napi;
-			int set_itr;
-			struct igb_ring *buddy;
+			u32 rx_buffer_len;
 		};
 	};
-
-	char name[IFNAMSIZ + 5];
 };
 
+#define IGB_RING_FLAG_RX_CSUM        0x00000001 /* RX CSUM enabled */
+#define IGB_RING_FLAG_RX_SCTP_CSUM   0x00000002 /* SCTP CSUM offload enabled */
+
+#define IGB_RING_FLAG_TX_CTX_IDX     0x00000001 /* HW requires context index */
+
+#define IGB_ADVTXD_DCMD (E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS)
+
 #define E1000_RX_DESC_ADV(R, i)	    \
 	(&(((union e1000_adv_rx_desc *)((R).desc))[i]))
 #define E1000_TX_DESC_ADV(R, i)	    \
@@ -197,6 +228,15 @@
 #define E1000_TX_CTXTDESC_ADV(R, i)	    \
 	(&(((struct e1000_adv_tx_context_desc *)((R).desc))[i]))
 
+/* igb_desc_unused - calculate if we have unused descriptors */
+static inline int igb_desc_unused(struct igb_ring *ring)
+{
+	if (ring->next_to_clean > ring->next_to_use)
+		return ring->next_to_clean - ring->next_to_use - 1;
+
+	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
 /* board specific private data structure */
 
 struct igb_adapter {
@@ -205,18 +245,14 @@
 	struct vlan_group *vlgrp;
 	u16 mng_vlan_id;
 	u32 bd_number;
-	u32 rx_buffer_len;
 	u32 wol;
 	u32 en_mng_pt;
 	u16 link_speed;
 	u16 link_duplex;
-	unsigned int total_tx_bytes;
-	unsigned int total_tx_packets;
-	unsigned int total_rx_bytes;
-	unsigned int total_rx_packets;
+
 	/* Interrupt Throttle Rate */
-	u32 itr;
-	u32 itr_setting;
+	u32 rx_itr_setting;
+	u32 tx_itr_setting;
 	u16 tx_itr;
 	u16 rx_itr;
 
@@ -229,13 +265,7 @@
 
 	/* TX */
 	struct igb_ring *tx_ring;      /* One per active queue */
-	unsigned int restart_queue;
 	unsigned long tx_queue_len;
-	u32 txd_cmd;
-	u32 gotc;
-	u64 gotc_old;
-	u64 tpt_old;
-	u64 colc_old;
 	u32 tx_timeout_count;
 
 	/* RX */
@@ -243,20 +273,12 @@
 	int num_tx_queues;
 	int num_rx_queues;
 
-	u64 hw_csum_err;
-	u64 hw_csum_good;
-	u32 alloc_rx_buff_failed;
-	u32 gorc;
-	u64 gorc_old;
-	u16 rx_ps_hdr_size;
 	u32 max_frame_size;
 	u32 min_frame_size;
 
 	/* OS defined structs */
 	struct net_device *netdev;
-	struct napi_struct napi;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 	struct cyclecounter cycles;
 	struct timecounter clock;
 	struct timecompare compare;
@@ -273,6 +295,9 @@
 	struct igb_ring test_rx_ring;
 
 	int msg_enable;
+
+	unsigned int num_q_vectors;
+	struct igb_q_vector *q_vector[MAX_Q_VECTORS];
 	struct msix_entry *msix_entries;
 	u32 eims_enable_mask;
 	u32 eims_other;
@@ -283,18 +308,20 @@
 	u32 eeprom_wol;
 
 	struct igb_ring *multi_tx_table[IGB_ABS_MAX_TX_QUEUES];
-	unsigned int tx_ring_count;
-	unsigned int rx_ring_count;
+	u16 tx_ring_count;
+	u16 rx_ring_count;
 	unsigned int vfs_allocated_count;
 	struct vf_data_storage *vf_data;
+	u32 rss_queues;
 };
 
 #define IGB_FLAG_HAS_MSI           (1 << 0)
 #define IGB_FLAG_DCA_ENABLED       (1 << 1)
 #define IGB_FLAG_QUAD_PORT_A       (1 << 2)
-#define IGB_FLAG_NEED_CTX_IDX      (1 << 3)
-#define IGB_FLAG_RX_CSUM_DISABLED  (1 << 4)
+#define IGB_FLAG_QUEUE_PAIRS       (1 << 3)
 
+#define IGB_82576_TSYNC_SHIFT 19
+#define IGB_82580_TSYNC_SHIFT 24
 enum e1000_state_t {
 	__IGB_TESTING,
 	__IGB_RESETTING,
@@ -314,10 +341,18 @@
 extern void igb_reinit_locked(struct igb_adapter *);
 extern void igb_reset(struct igb_adapter *);
 extern int igb_set_spd_dplx(struct igb_adapter *, u16);
-extern int igb_setup_tx_resources(struct igb_adapter *, struct igb_ring *);
-extern int igb_setup_rx_resources(struct igb_adapter *, struct igb_ring *);
+extern int igb_setup_tx_resources(struct igb_ring *);
+extern int igb_setup_rx_resources(struct igb_ring *);
 extern void igb_free_tx_resources(struct igb_ring *);
 extern void igb_free_rx_resources(struct igb_ring *);
+extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_setup_tctl(struct igb_adapter *);
+extern void igb_setup_rctl(struct igb_adapter *);
+extern netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *, struct igb_ring *);
+extern void igb_unmap_and_free_tx_resource(struct igb_ring *,
+					   struct igb_buffer *);
+extern void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
 extern void igb_update_stats(struct igb_adapter *);
 extern void igb_set_ethtool_ops(struct net_device *);
 
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index b243ed3..ac9d527 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -44,78 +44,94 @@
 	int stat_offset;
 };
 
-#define IGB_STAT(m) FIELD_SIZEOF(struct igb_adapter, m), \
-		      offsetof(struct igb_adapter, m)
+#define IGB_STAT(_name, _stat) { \
+	.stat_string = _name, \
+	.sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \
+	.stat_offset = offsetof(struct igb_adapter, _stat) \
+}
 static const struct igb_stats igb_gstrings_stats[] = {
-	{ "rx_packets", IGB_STAT(stats.gprc) },
-	{ "tx_packets", IGB_STAT(stats.gptc) },
-	{ "rx_bytes", IGB_STAT(stats.gorc) },
-	{ "tx_bytes", IGB_STAT(stats.gotc) },
-	{ "rx_broadcast", IGB_STAT(stats.bprc) },
-	{ "tx_broadcast", IGB_STAT(stats.bptc) },
-	{ "rx_multicast", IGB_STAT(stats.mprc) },
-	{ "tx_multicast", IGB_STAT(stats.mptc) },
-	{ "rx_errors", IGB_STAT(net_stats.rx_errors) },
-	{ "tx_errors", IGB_STAT(net_stats.tx_errors) },
-	{ "tx_dropped", IGB_STAT(net_stats.tx_dropped) },
-	{ "multicast", IGB_STAT(stats.mprc) },
-	{ "collisions", IGB_STAT(stats.colc) },
-	{ "rx_length_errors", IGB_STAT(net_stats.rx_length_errors) },
-	{ "rx_over_errors", IGB_STAT(net_stats.rx_over_errors) },
-	{ "rx_crc_errors", IGB_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) },
-	{ "rx_no_buffer_count", IGB_STAT(stats.rnbc) },
-	{ "rx_queue_drop_packet_count", IGB_STAT(net_stats.rx_fifo_errors) },
-	{ "rx_missed_errors", IGB_STAT(stats.mpc) },
-	{ "tx_aborted_errors", IGB_STAT(stats.ecol) },
-	{ "tx_carrier_errors", IGB_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", IGB_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", IGB_STAT(net_stats.tx_heartbeat_errors) },
-	{ "tx_window_errors", IGB_STAT(stats.latecol) },
-	{ "tx_abort_late_coll", IGB_STAT(stats.latecol) },
-	{ "tx_deferred_ok", IGB_STAT(stats.dc) },
-	{ "tx_single_coll_ok", IGB_STAT(stats.scc) },
-	{ "tx_multi_coll_ok", IGB_STAT(stats.mcc) },
-	{ "tx_timeout_count", IGB_STAT(tx_timeout_count) },
-	{ "tx_restart_queue", IGB_STAT(restart_queue) },
-	{ "rx_long_length_errors", IGB_STAT(stats.roc) },
-	{ "rx_short_length_errors", IGB_STAT(stats.ruc) },
-	{ "rx_align_errors", IGB_STAT(stats.algnerrc) },
-	{ "tx_tcp_seg_good", IGB_STAT(stats.tsctc) },
-	{ "tx_tcp_seg_failed", IGB_STAT(stats.tsctfc) },
-	{ "rx_flow_control_xon", IGB_STAT(stats.xonrxc) },
-	{ "rx_flow_control_xoff", IGB_STAT(stats.xoffrxc) },
-	{ "tx_flow_control_xon", IGB_STAT(stats.xontxc) },
-	{ "tx_flow_control_xoff", IGB_STAT(stats.xofftxc) },
-	{ "rx_long_byte_count", IGB_STAT(stats.gorc) },
-	{ "rx_csum_offload_good", IGB_STAT(hw_csum_good) },
-	{ "rx_csum_offload_errors", IGB_STAT(hw_csum_err) },
-	{ "tx_dma_out_of_sync", IGB_STAT(stats.doosync) },
-	{ "alloc_rx_buff_failed", IGB_STAT(alloc_rx_buff_failed) },
-	{ "tx_smbus", IGB_STAT(stats.mgptc) },
-	{ "rx_smbus", IGB_STAT(stats.mgprc) },
-	{ "dropped_smbus", IGB_STAT(stats.mgpdc) },
+	IGB_STAT("rx_packets", stats.gprc),
+	IGB_STAT("tx_packets", stats.gptc),
+	IGB_STAT("rx_bytes", stats.gorc),
+	IGB_STAT("tx_bytes", stats.gotc),
+	IGB_STAT("rx_broadcast", stats.bprc),
+	IGB_STAT("tx_broadcast", stats.bptc),
+	IGB_STAT("rx_multicast", stats.mprc),
+	IGB_STAT("tx_multicast", stats.mptc),
+	IGB_STAT("multicast", stats.mprc),
+	IGB_STAT("collisions", stats.colc),
+	IGB_STAT("rx_crc_errors", stats.crcerrs),
+	IGB_STAT("rx_no_buffer_count", stats.rnbc),
+	IGB_STAT("rx_missed_errors", stats.mpc),
+	IGB_STAT("tx_aborted_errors", stats.ecol),
+	IGB_STAT("tx_carrier_errors", stats.tncrs),
+	IGB_STAT("tx_window_errors", stats.latecol),
+	IGB_STAT("tx_abort_late_coll", stats.latecol),
+	IGB_STAT("tx_deferred_ok", stats.dc),
+	IGB_STAT("tx_single_coll_ok", stats.scc),
+	IGB_STAT("tx_multi_coll_ok", stats.mcc),
+	IGB_STAT("tx_timeout_count", tx_timeout_count),
+	IGB_STAT("rx_long_length_errors", stats.roc),
+	IGB_STAT("rx_short_length_errors", stats.ruc),
+	IGB_STAT("rx_align_errors", stats.algnerrc),
+	IGB_STAT("tx_tcp_seg_good", stats.tsctc),
+	IGB_STAT("tx_tcp_seg_failed", stats.tsctfc),
+	IGB_STAT("rx_flow_control_xon", stats.xonrxc),
+	IGB_STAT("rx_flow_control_xoff", stats.xoffrxc),
+	IGB_STAT("tx_flow_control_xon", stats.xontxc),
+	IGB_STAT("tx_flow_control_xoff", stats.xofftxc),
+	IGB_STAT("rx_long_byte_count", stats.gorc),
+	IGB_STAT("tx_dma_out_of_sync", stats.doosync),
+	IGB_STAT("tx_smbus", stats.mgptc),
+	IGB_STAT("rx_smbus", stats.mgprc),
+	IGB_STAT("dropped_smbus", stats.mgpdc),
 };
 
-#define IGB_QUEUE_STATS_LEN \
-	(((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues)* \
-	  (sizeof(struct igb_rx_queue_stats) / sizeof(u64))) + \
-	 ((((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues) * \
-	  (sizeof(struct igb_tx_queue_stats) / sizeof(u64))))
+#define IGB_NETDEV_STAT(_net_stat) { \
+	.stat_string = __stringify(_net_stat), \
+	.sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \
+	.stat_offset = offsetof(struct net_device_stats, _net_stat) \
+}
+static const struct igb_stats igb_gstrings_net_stats[] = {
+	IGB_NETDEV_STAT(rx_errors),
+	IGB_NETDEV_STAT(tx_errors),
+	IGB_NETDEV_STAT(tx_dropped),
+	IGB_NETDEV_STAT(rx_length_errors),
+	IGB_NETDEV_STAT(rx_over_errors),
+	IGB_NETDEV_STAT(rx_frame_errors),
+	IGB_NETDEV_STAT(rx_fifo_errors),
+	IGB_NETDEV_STAT(tx_fifo_errors),
+	IGB_NETDEV_STAT(tx_heartbeat_errors)
+};
+
 #define IGB_GLOBAL_STATS_LEN	\
-	sizeof(igb_gstrings_stats) / sizeof(struct igb_stats)
-#define IGB_STATS_LEN (IGB_GLOBAL_STATS_LEN + IGB_QUEUE_STATS_LEN)
+	(sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
+#define IGB_NETDEV_STATS_LEN	\
+	(sizeof(igb_gstrings_net_stats) / sizeof(struct igb_stats))
+#define IGB_RX_QUEUE_STATS_LEN \
+	(sizeof(struct igb_rx_queue_stats) / sizeof(u64))
+#define IGB_TX_QUEUE_STATS_LEN \
+	(sizeof(struct igb_tx_queue_stats) / sizeof(u64))
+#define IGB_QUEUE_STATS_LEN \
+	((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
+	  IGB_RX_QUEUE_STATS_LEN) + \
+	 (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
+	  IGB_TX_QUEUE_STATS_LEN))
+#define IGB_STATS_LEN \
+	(IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
+
 static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
 	"Register test  (offline)", "Eeprom test    (offline)",
 	"Interrupt test (offline)", "Loopback test  (offline)",
 	"Link test   (on/offline)"
 };
-#define IGB_TEST_LEN sizeof(igb_gstrings_test) / ETH_GSTRING_LEN
+#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
 
 static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	u32 status;
 
 	if (hw->phy.media_type == e1000_media_type_copper) {
 
@@ -150,17 +166,20 @@
 
 	ecmd->transceiver = XCVR_INTERNAL;
 
-	if (rd32(E1000_STATUS) & E1000_STATUS_LU) {
+	status = rd32(E1000_STATUS);
 
-		adapter->hw.mac.ops.get_speed_and_duplex(hw,
-					&adapter->link_speed,
-					&adapter->link_duplex);
-		ecmd->speed = adapter->link_speed;
+	if (status & E1000_STATUS_LU) {
 
-		/* unfortunately FULL_DUPLEX != DUPLEX_FULL
-		 *          and HALF_DUPLEX != DUPLEX_HALF */
+		if ((status & E1000_STATUS_SPEED_1000) ||
+		    hw->phy.media_type != e1000_media_type_copper)
+			ecmd->speed = SPEED_1000;
+		else if (status & E1000_STATUS_SPEED_100)
+			ecmd->speed = SPEED_100;
+		else
+			ecmd->speed = SPEED_10;
 
-		if (adapter->link_duplex == FULL_DUPLEX)
+		if ((status & E1000_STATUS_FD) ||
+		    hw->phy.media_type != e1000_media_type_copper)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
@@ -251,8 +270,9 @@
 		if (netif_running(adapter->netdev)) {
 			igb_down(adapter);
 			igb_up(adapter);
-		} else
+		} else {
 			igb_reset(adapter);
+		}
 	} else {
 		if (pause->rx_pause && pause->tx_pause)
 			hw->fc.requested_mode = e1000_fc_full;
@@ -276,17 +296,20 @@
 static u32 igb_get_rx_csum(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	return !(adapter->flags & IGB_FLAG_RX_CSUM_DISABLED);
+	return !!(adapter->rx_ring[0].flags & IGB_RING_FLAG_RX_CSUM);
 }
 
 static int igb_set_rx_csum(struct net_device *netdev, u32 data)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	int i;
 
-	if (data)
-		adapter->flags &= ~IGB_FLAG_RX_CSUM_DISABLED;
-	else
-		adapter->flags |= IGB_FLAG_RX_CSUM_DISABLED;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		if (data)
+			adapter->rx_ring[i].flags |= IGB_RING_FLAG_RX_CSUM;
+		else
+			adapter->rx_ring[i].flags &= ~IGB_RING_FLAG_RX_CSUM;
+	}
 
 	return 0;
 }
@@ -302,7 +325,7 @@
 
 	if (data) {
 		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-		if (adapter->hw.mac.type == e1000_82576)
+		if (adapter->hw.mac.type >= e1000_82576)
 			netdev->features |= NETIF_F_SCTP_CSUM;
 	} else {
 		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
@@ -496,19 +519,10 @@
 	regs_buff[119] = adapter->stats.scvpc;
 	regs_buff[120] = adapter->stats.hrmpc;
 
-	/* These should probably be added to e1000_regs.h instead */
-	#define E1000_PSRTYPE_REG(_i) (0x05480 + ((_i) * 4))
-	#define E1000_IP4AT_REG(_i)   (0x05840 + ((_i) * 8))
-	#define E1000_IP6AT_REG(_i)   (0x05880 + ((_i) * 4))
-	#define E1000_WUPM_REG(_i)    (0x05A00 + ((_i) * 4))
-	#define E1000_FFMT_REG(_i)    (0x09000 + ((_i) * 8))
-	#define E1000_FFVT_REG(_i)    (0x09800 + ((_i) * 8))
-	#define E1000_FFLT_REG(_i)    (0x05F00 + ((_i) * 8))
-
 	for (i = 0; i < 4; i++)
 		regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
 	for (i = 0; i < 4; i++)
-		regs_buff[125 + i] = rd32(E1000_PSRTYPE_REG(i));
+		regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
 	for (i = 0; i < 4; i++)
 		regs_buff[129 + i] = rd32(E1000_RDBAL(i));
 	for (i = 0; i < 4; i++)
@@ -733,17 +747,17 @@
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct igb_ring *temp_ring;
 	int i, err = 0;
-	u32 new_rx_count, new_tx_count;
+	u16 new_rx_count, new_tx_count;
 
 	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 		return -EINVAL;
 
-	new_rx_count = max(ring->rx_pending, (u32)IGB_MIN_RXD);
-	new_rx_count = min(new_rx_count, (u32)IGB_MAX_RXD);
+	new_rx_count = min_t(u32, ring->rx_pending, IGB_MAX_RXD);
+	new_rx_count = max_t(u16, new_rx_count, IGB_MIN_RXD);
 	new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
 
-	new_tx_count = max(ring->tx_pending, (u32)IGB_MIN_TXD);
-	new_tx_count = min(new_tx_count, (u32)IGB_MAX_TXD);
+	new_tx_count = min_t(u32, ring->tx_pending, IGB_MAX_TXD);
+	new_tx_count = max_t(u16, new_tx_count, IGB_MIN_TXD);
 	new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
 
 	if ((new_tx_count == adapter->tx_ring_count) &&
@@ -788,7 +802,7 @@
 
 		for (i = 0; i < adapter->num_tx_queues; i++) {
 			temp_ring[i].count = new_tx_count;
-			err = igb_setup_tx_resources(adapter, &temp_ring[i]);
+			err = igb_setup_tx_resources(&temp_ring[i]);
 			if (err) {
 				while (i) {
 					i--;
@@ -813,7 +827,7 @@
 
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			temp_ring[i].count = new_rx_count;
-			err = igb_setup_rx_resources(adapter, &temp_ring[i]);
+			err = igb_setup_rx_resources(&temp_ring[i]);
 			if (err) {
 				while (i) {
 					i--;
@@ -867,6 +881,49 @@
 #define TABLE64_TEST_LO	5
 #define TABLE64_TEST_HI	6
 
+/* 82580 reg test */
+static struct igb_reg_test reg_test_82580[] = {
+	{ E1000_FCAL,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_FCAH,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_FCT,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+	{ E1000_VET,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_RDBAL(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_RDBAH(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RDLEN(4),  0x40,  4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	/* RDH is read-only for 82580, only test RDT. */
+	{ E1000_RDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RDT(4),	   0x40,  4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_FCRTH,	   0x100, 1,  PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+	{ E1000_FCTTV,	   0x100, 1,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TIPG,	   0x100, 1,  PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+	{ E1000_TDBAL(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(0),  0x100, 4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(0),  0x100, 4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_TDBAL(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+	{ E1000_TDBAH(4),  0x40,  4,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_TDLEN(4),  0x40,  4,  PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+	{ E1000_TDT(0),	   0x100, 4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_TDT(4),	   0x40,  4,  PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+	{ E1000_RCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+	{ E1000_RCTL, 	   0x100, 1,  SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+	{ E1000_TCTL,	   0x100, 1,  SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_LO,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA,	   0, 16, TABLE64_TEST_HI,
+						0x83FFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 8, TABLE64_TEST_LO,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ E1000_RA2,	   0, 8, TABLE64_TEST_HI,
+						0x83FFFFFF, 0xFFFFFFFF },
+	{ E1000_MTA,	   0, 128, TABLE32_TEST,
+						0xFFFFFFFF, 0xFFFFFFFF },
+	{ 0, 0, 0, 0 }
+};
+
 /* 82576 reg test */
 static struct igb_reg_test reg_test_82576[] = {
 	{ E1000_FCAL,	   0x100, 1,  PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
@@ -944,7 +1001,7 @@
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 pat, val;
-	u32 _test[] =
+	static const u32 _test[] =
 		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
 	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
 		wr32(reg, (_test[pat] & write));
@@ -957,6 +1014,7 @@
 			return 1;
 		}
 	}
+
 	return 0;
 }
 
@@ -974,6 +1032,7 @@
 		*data = reg;
 		return 1;
 	}
+
 	return 0;
 }
 
@@ -996,14 +1055,18 @@
 	u32 value, before, after;
 	u32 i, toggle;
 
-	toggle = 0x7FFFF3FF;
-
 	switch (adapter->hw.mac.type) {
+	case e1000_82580:
+		test = reg_test_82580;
+		toggle = 0x7FEFF3FF;
+		break;
 	case e1000_82576:
 		test = reg_test_82576;
+		toggle = 0x7FFFF3FF;
 		break;
 	default:
 		test = reg_test_82575;
+		toggle = 0x7FFFF3FF;
 		break;
 	}
 
@@ -1081,8 +1144,7 @@
 	*data = 0;
 	/* Read and add up the contents of the EEPROM */
 	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
-		if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp))
-		    < 0) {
+		if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
 			*data = 1;
 			break;
 		}
@@ -1098,8 +1160,7 @@
 
 static irqreturn_t igb_test_intr(int irq, void *data)
 {
-	struct net_device *netdev = (struct net_device *) data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = (struct igb_adapter *) data;
 	struct e1000_hw *hw = &adapter->hw;
 
 	adapter->test_icr |= rd32(E1000_ICR);
@@ -1117,38 +1178,45 @@
 	*data = 0;
 
 	/* Hook up test interrupt handler just for this test */
-	if (adapter->msix_entries)
-		/* NOTE: we don't test MSI-X interrupts here, yet */
-		return 0;
-
-	if (adapter->flags & IGB_FLAG_HAS_MSI) {
-		shared_int = false;
-		if (request_irq(irq, &igb_test_intr, 0, netdev->name, netdev)) {
+	if (adapter->msix_entries) {
+		if (request_irq(adapter->msix_entries[0].vector,
+		                igb_test_intr, 0, netdev->name, adapter)) {
 			*data = 1;
 			return -1;
 		}
-	} else if (!request_irq(irq, &igb_test_intr, IRQF_PROBE_SHARED,
-				netdev->name, netdev)) {
+	} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
 		shared_int = false;
-	} else if (request_irq(irq, &igb_test_intr, IRQF_SHARED,
-		 netdev->name, netdev)) {
+		if (request_irq(irq,
+		                igb_test_intr, 0, netdev->name, adapter)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED,
+				netdev->name, adapter)) {
+		shared_int = false;
+	} else if (request_irq(irq, igb_test_intr, IRQF_SHARED,
+		 netdev->name, adapter)) {
 		*data = 1;
 		return -1;
 	}
 	dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
 		(shared_int ? "shared" : "unshared"));
+
 	/* Disable all the interrupts */
-	wr32(E1000_IMC, 0xFFFFFFFF);
+	wr32(E1000_IMC, ~0);
 	msleep(10);
 
 	/* Define all writable bits for ICS */
-	switch(hw->mac.type) {
+	switch (hw->mac.type) {
 	case e1000_82575:
 		ics_mask = 0x37F47EDD;
 		break;
 	case e1000_82576:
 		ics_mask = 0x77D4FBFD;
 		break;
+	case e1000_82580:
+		ics_mask = 0x77DCFED5;
+		break;
 	default:
 		ics_mask = 0x7FFFFFFF;
 		break;
@@ -1232,190 +1300,61 @@
 	msleep(10);
 
 	/* Unhook test interrupt handler */
-	free_irq(irq, netdev);
+	if (adapter->msix_entries)
+		free_irq(adapter->msix_entries[0].vector, adapter);
+	else
+		free_irq(irq, adapter);
 
 	return *data;
 }
 
 static void igb_free_desc_rings(struct igb_adapter *adapter)
 {
-	struct igb_ring *tx_ring = &adapter->test_tx_ring;
-	struct igb_ring *rx_ring = &adapter->test_rx_ring;
-	struct pci_dev *pdev = adapter->pdev;
-	int i;
-
-	if (tx_ring->desc && tx_ring->buffer_info) {
-		for (i = 0; i < tx_ring->count; i++) {
-			struct igb_buffer *buf = &(tx_ring->buffer_info[i]);
-			if (buf->dma)
-				pci_unmap_single(pdev, buf->dma, buf->length,
-						 PCI_DMA_TODEVICE);
-			if (buf->skb)
-				dev_kfree_skb(buf->skb);
-		}
-	}
-
-	if (rx_ring->desc && rx_ring->buffer_info) {
-		for (i = 0; i < rx_ring->count; i++) {
-			struct igb_buffer *buf = &(rx_ring->buffer_info[i]);
-			if (buf->dma)
-				pci_unmap_single(pdev, buf->dma,
-						 IGB_RXBUFFER_2048,
-						 PCI_DMA_FROMDEVICE);
-			if (buf->skb)
-				dev_kfree_skb(buf->skb);
-		}
-	}
-
-	if (tx_ring->desc) {
-		pci_free_consistent(pdev, tx_ring->size, tx_ring->desc,
-				    tx_ring->dma);
-		tx_ring->desc = NULL;
-	}
-	if (rx_ring->desc) {
-		pci_free_consistent(pdev, rx_ring->size, rx_ring->desc,
-				    rx_ring->dma);
-		rx_ring->desc = NULL;
-	}
-
-	kfree(tx_ring->buffer_info);
-	tx_ring->buffer_info = NULL;
-	kfree(rx_ring->buffer_info);
-	rx_ring->buffer_info = NULL;
-
-	return;
+	igb_free_tx_resources(&adapter->test_tx_ring);
+	igb_free_rx_resources(&adapter->test_rx_ring);
 }
 
 static int igb_setup_desc_rings(struct igb_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct igb_ring *tx_ring = &adapter->test_tx_ring;
 	struct igb_ring *rx_ring = &adapter->test_rx_ring;
-	struct pci_dev *pdev = adapter->pdev;
-	struct igb_buffer *buffer_info;
-	u32 rctl;
-	int i, ret_val;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
 
 	/* Setup Tx descriptor ring and Tx buffers */
+	tx_ring->count = IGB_DEFAULT_TXD;
+	tx_ring->pdev = adapter->pdev;
+	tx_ring->netdev = adapter->netdev;
+	tx_ring->reg_idx = adapter->vfs_allocated_count;
 
-	if (!tx_ring->count)
-		tx_ring->count = IGB_DEFAULT_TXD;
-
-	tx_ring->buffer_info = kcalloc(tx_ring->count,
-				       sizeof(struct igb_buffer),
-				       GFP_KERNEL);
-	if (!tx_ring->buffer_info) {
+	if (igb_setup_tx_resources(tx_ring)) {
 		ret_val = 1;
 		goto err_nomem;
 	}
 
-	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
-	tx_ring->size = ALIGN(tx_ring->size, 4096);
-	tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
-					     &tx_ring->dma);
-	if (!tx_ring->desc) {
-		ret_val = 2;
-		goto err_nomem;
-	}
-	tx_ring->next_to_use = tx_ring->next_to_clean = 0;
-
-	wr32(E1000_TDBAL(0),
-			((u64) tx_ring->dma & 0x00000000FFFFFFFF));
-	wr32(E1000_TDBAH(0), ((u64) tx_ring->dma >> 32));
-	wr32(E1000_TDLEN(0),
-			tx_ring->count * sizeof(union e1000_adv_tx_desc));
-	wr32(E1000_TDH(0), 0);
-	wr32(E1000_TDT(0), 0);
-	wr32(E1000_TCTL,
-			E1000_TCTL_PSP | E1000_TCTL_EN |
-			E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
-			E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
-
-	for (i = 0; i < tx_ring->count; i++) {
-		union e1000_adv_tx_desc *tx_desc;
-		struct sk_buff *skb;
-		unsigned int size = 1024;
-
-		tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
-		skb = alloc_skb(size, GFP_KERNEL);
-		if (!skb) {
-			ret_val = 3;
-			goto err_nomem;
-		}
-		skb_put(skb, size);
-		buffer_info = &tx_ring->buffer_info[i];
-		buffer_info->skb = skb;
-		buffer_info->length = skb->len;
-		buffer_info->dma = pci_map_single(pdev, skb->data, skb->len,
-		                                  PCI_DMA_TODEVICE);
-		tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
-		tx_desc->read.olinfo_status = cpu_to_le32(skb->len) <<
-		                              E1000_ADVTXD_PAYLEN_SHIFT;
-		tx_desc->read.cmd_type_len = cpu_to_le32(skb->len);
-		tx_desc->read.cmd_type_len |= cpu_to_le32(E1000_TXD_CMD_EOP |
-		                                          E1000_TXD_CMD_IFCS |
-		                                          E1000_TXD_CMD_RS |
-		                                          E1000_ADVTXD_DTYP_DATA |
-		                                          E1000_ADVTXD_DCMD_DEXT);
-	}
+	igb_setup_tctl(adapter);
+	igb_configure_tx_ring(adapter, tx_ring);
 
 	/* Setup Rx descriptor ring and Rx buffers */
+	rx_ring->count = IGB_DEFAULT_RXD;
+	rx_ring->pdev = adapter->pdev;
+	rx_ring->netdev = adapter->netdev;
+	rx_ring->rx_buffer_len = IGB_RXBUFFER_2048;
+	rx_ring->reg_idx = adapter->vfs_allocated_count;
 
-	if (!rx_ring->count)
-		rx_ring->count = IGB_DEFAULT_RXD;
-
-	rx_ring->buffer_info = kcalloc(rx_ring->count,
-				       sizeof(struct igb_buffer),
-				       GFP_KERNEL);
-	if (!rx_ring->buffer_info) {
-		ret_val = 4;
+	if (igb_setup_rx_resources(rx_ring)) {
+		ret_val = 3;
 		goto err_nomem;
 	}
 
-	rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
-	rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
-					     &rx_ring->dma);
-	if (!rx_ring->desc) {
-		ret_val = 5;
-		goto err_nomem;
-	}
-	rx_ring->next_to_use = rx_ring->next_to_clean = 0;
+	/* set the default queue to queue 0 of PF */
+	wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
 
-	rctl = rd32(E1000_RCTL);
-	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
-	wr32(E1000_RDBAL(0),
-			((u64) rx_ring->dma & 0xFFFFFFFF));
-	wr32(E1000_RDBAH(0),
-			((u64) rx_ring->dma >> 32));
-	wr32(E1000_RDLEN(0), rx_ring->size);
-	wr32(E1000_RDH(0), 0);
-	wr32(E1000_RDT(0), 0);
-	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
-	rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
-		(adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
-	wr32(E1000_RCTL, rctl);
-	wr32(E1000_SRRCTL(0), E1000_SRRCTL_DESCTYPE_ADV_ONEBUF);
+	/* enable receive ring */
+	igb_setup_rctl(adapter);
+	igb_configure_rx_ring(adapter, rx_ring);
 
-	for (i = 0; i < rx_ring->count; i++) {
-		union e1000_adv_rx_desc *rx_desc;
-		struct sk_buff *skb;
-
-		buffer_info = &rx_ring->buffer_info[i];
-		rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
-		skb = alloc_skb(IGB_RXBUFFER_2048 + NET_IP_ALIGN,
-				GFP_KERNEL);
-		if (!skb) {
-			ret_val = 6;
-			goto err_nomem;
-		}
-		skb_reserve(skb, NET_IP_ALIGN);
-		buffer_info->skb = skb;
-		buffer_info->dma = pci_map_single(pdev, skb->data,
-		                                  IGB_RXBUFFER_2048,
-		                                  PCI_DMA_FROMDEVICE);
-		rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
-		memset(skb->data, 0x00, skb->len);
-	}
+	igb_alloc_rx_buffers_adv(rx_ring, igb_desc_unused(rx_ring));
 
 	return 0;
 
@@ -1449,6 +1388,9 @@
 		igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
 		/* autoneg off */
 		igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
+	} else if (hw->phy.type == e1000_phy_82580) {
+		/* enable MII loopback */
+		igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
 	}
 
 	ctrl_reg = rd32(E1000_CTRL);
@@ -1491,7 +1433,10 @@
 	struct e1000_hw *hw = &adapter->hw;
 	u32 reg;
 
-	if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+	reg = rd32(E1000_CTRL_EXT);
+
+	/* use CTRL_EXT to identify link type as SGMII can appear as copper */
+	if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
 		reg = rd32(E1000_RCTL);
 		reg |= E1000_RCTL_LBM_TCVR;
 		wr32(E1000_RCTL, reg);
@@ -1522,11 +1467,9 @@
 		wr32(E1000_PCS_LCTL, reg);
 
 		return 0;
-	} else if (hw->phy.media_type == e1000_media_type_copper) {
-		return igb_set_phy_loopback(adapter);
 	}
 
-	return 7;
+	return igb_set_phy_loopback(adapter);
 }
 
 static void igb_loopback_cleanup(struct igb_adapter *adapter)
@@ -1552,35 +1495,99 @@
 				    unsigned int frame_size)
 {
 	memset(skb->data, 0xFF, frame_size);
-	frame_size &= ~1;
-	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
-	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
-	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+	frame_size /= 2;
+	memset(&skb->data[frame_size], 0xAA, frame_size - 1);
+	memset(&skb->data[frame_size + 10], 0xBE, 1);
+	memset(&skb->data[frame_size + 12], 0xAF, 1);
 }
 
 static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
 {
-	frame_size &= ~1;
-	if (*(skb->data + 3) == 0xFF)
-		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
-		   (*(skb->data + frame_size / 2 + 12) == 0xAF))
+	frame_size /= 2;
+	if (*(skb->data + 3) == 0xFF) {
+		if ((*(skb->data + frame_size + 10) == 0xBE) &&
+		   (*(skb->data + frame_size + 12) == 0xAF)) {
 			return 0;
+		}
+	}
 	return 13;
 }
 
+static int igb_clean_test_rings(struct igb_ring *rx_ring,
+                                struct igb_ring *tx_ring,
+                                unsigned int size)
+{
+	union e1000_adv_rx_desc *rx_desc;
+	struct igb_buffer *buffer_info;
+	int rx_ntc, tx_ntc, count = 0;
+	u32 staterr;
+
+	/* initialize next to clean and descriptor values */
+	rx_ntc = rx_ring->next_to_clean;
+	tx_ntc = tx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+	while (staterr & E1000_RXD_STAT_DD) {
+		/* check rx buffer */
+		buffer_info = &rx_ring->buffer_info[rx_ntc];
+
+		/* unmap rx buffer, will be remapped by alloc_rx_buffers */
+		pci_unmap_single(rx_ring->pdev,
+		                 buffer_info->dma,
+				 rx_ring->rx_buffer_len,
+				 PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
+
+		/* verify contents of skb */
+		if (!igb_check_lbtest_frame(buffer_info->skb, size))
+			count++;
+
+		/* unmap buffer on tx side */
+		buffer_info = &tx_ring->buffer_info[tx_ntc];
+		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+
+		/* increment rx/tx next to clean counters */
+		rx_ntc++;
+		if (rx_ntc == rx_ring->count)
+			rx_ntc = 0;
+		tx_ntc++;
+		if (tx_ntc == tx_ring->count)
+			tx_ntc = 0;
+
+		/* fetch next descriptor */
+		rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	}
+
+	/* re-map buffers to ring, store next to clean values */
+	igb_alloc_rx_buffers_adv(rx_ring, count);
+	rx_ring->next_to_clean = rx_ntc;
+	tx_ring->next_to_clean = tx_ntc;
+
+	return count;
+}
+
 static int igb_run_loopback_test(struct igb_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct igb_ring *tx_ring = &adapter->test_tx_ring;
 	struct igb_ring *rx_ring = &adapter->test_rx_ring;
-	struct pci_dev *pdev = adapter->pdev;
-	int i, j, k, l, lc, good_cnt;
-	int ret_val = 0;
-	unsigned long time;
+	int i, j, lc, good_cnt, ret_val = 0;
+	unsigned int size = 1024;
+	netdev_tx_t tx_ret_val;
+	struct sk_buff *skb;
 
-	wr32(E1000_RDT(0), rx_ring->count - 1);
+	/* allocate test skb */
+	skb = alloc_skb(size, GFP_KERNEL);
+	if (!skb)
+		return 11;
 
-	/* Calculate the loop count based on the largest descriptor ring
+	/* place data into test skb */
+	igb_create_lbtest_frame(skb, size);
+	skb_put(skb, size);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
 	 * The idea is to wrap the largest ring a number of times using 64
 	 * send/receive pairs during each loop
 	 */
@@ -1590,50 +1597,36 @@
 	else
 		lc = ((rx_ring->count / 64) * 2) + 1;
 
-	k = l = 0;
 	for (j = 0; j <= lc; j++) { /* loop count loop */
-		for (i = 0; i < 64; i++) { /* send the packets */
-			igb_create_lbtest_frame(tx_ring->buffer_info[k].skb,
-						1024);
-			pci_dma_sync_single_for_device(pdev,
-				tx_ring->buffer_info[k].dma,
-				tx_ring->buffer_info[k].length,
-				PCI_DMA_TODEVICE);
-			k++;
-			if (k == tx_ring->count)
-				k = 0;
-		}
-		wr32(E1000_TDT(0), k);
-		msleep(200);
-		time = jiffies; /* set the start time for the receive */
+		/* reset count of good packets */
 		good_cnt = 0;
-		do { /* receive the sent packets */
-			pci_dma_sync_single_for_cpu(pdev,
-					rx_ring->buffer_info[l].dma,
-					IGB_RXBUFFER_2048,
-					PCI_DMA_FROMDEVICE);
 
-			ret_val = igb_check_lbtest_frame(
-					     rx_ring->buffer_info[l].skb, 1024);
-			if (!ret_val)
+		/* place 64 packets on the transmit queue*/
+		for (i = 0; i < 64; i++) {
+			skb_get(skb);
+			tx_ret_val = igb_xmit_frame_ring_adv(skb, tx_ring);
+			if (tx_ret_val == NETDEV_TX_OK)
 				good_cnt++;
-			l++;
-			if (l == rx_ring->count)
-				l = 0;
-			/* time + 20 msecs (200 msecs on 2.4) is more than
-			 * enough time to complete the receives, if it's
-			 * exceeded, break and error off
-			 */
-		} while (good_cnt < 64 && jiffies < (time + 20));
+		}
+
 		if (good_cnt != 64) {
-			ret_val = 13; /* ret_val is the same as mis-compare */
+			ret_val = 12;
 			break;
 		}
-		if (jiffies >= (time + 20)) {
-			ret_val = 14; /* error code for time out error */
+
+		/* allow 200 milliseconds for packets to go from tx to rx */
+		msleep(200);
+
+		good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
+		if (good_cnt != 64) {
+			ret_val = 13;
 			break;
 		}
 	} /* end loop count loop */
+
+	/* free the original skb */
+	kfree_skb(skb);
+
 	return ret_val;
 }
 
@@ -1686,8 +1679,7 @@
 		if (hw->mac.autoneg)
 			msleep(4000);
 
-		if (!(rd32(E1000_STATUS) &
-		      E1000_STATUS_LU))
+		if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
 			*data = 1;
 	}
 	return *data;
@@ -1869,7 +1861,6 @@
 		adapter->wol |= E1000_WUFC_BC;
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= E1000_WUFC_MAG;
-
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	return 0;
@@ -1882,12 +1873,19 @@
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	unsigned long timeout;
 
-	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+	timeout = data * 1000;
+
+	/*
+	 *  msleep_interruptable only accepts unsigned int so we are limited
+	 * in how long a duration we can wait
+	 */
+	if (!timeout || timeout > UINT_MAX)
+		timeout = UINT_MAX;
 
 	igb_blink_led(hw);
-	msleep_interruptible(data * 1000);
+	msleep_interruptible(timeout);
 
 	igb_led_off(hw);
 	clear_bit(IGB_LED_ON, &adapter->led_status);
@@ -1900,7 +1898,6 @@
 			    struct ethtool_coalesce *ec)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
 	int i;
 
 	if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
@@ -1909,17 +1906,39 @@
 	    (ec->rx_coalesce_usecs == 2))
 		return -EINVAL;
 
-	/* convert to rate of irq's per second */
-	if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
-		adapter->itr_setting = ec->rx_coalesce_usecs;
-		adapter->itr = IGB_START_ITR;
-	} else {
-		adapter->itr_setting = ec->rx_coalesce_usecs << 2;
-		adapter->itr = adapter->itr_setting;
-	}
+	if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+	    ((ec->tx_coalesce_usecs > 3) &&
+	     (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+	    (ec->tx_coalesce_usecs == 2))
+		return -EINVAL;
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		wr32(adapter->rx_ring[i].itr_register, adapter->itr);
+	if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
+		return -EINVAL;
+
+	/* convert to rate of irq's per second */
+	if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+	else
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+
+	/* convert to rate of irq's per second */
+	if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
+		adapter->tx_itr_setting = adapter->rx_itr_setting;
+	else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+	else
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		if (q_vector->rx_ring)
+			q_vector->itr_val = adapter->rx_itr_setting;
+		else
+			q_vector->itr_val = adapter->tx_itr_setting;
+		if (q_vector->itr_val && q_vector->itr_val <= 3)
+			q_vector->itr_val = IGB_START_ITR;
+		q_vector->set_itr = 1;
+	}
 
 	return 0;
 }
@@ -1929,15 +1948,21 @@
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 
-	if (adapter->itr_setting <= 3)
-		ec->rx_coalesce_usecs = adapter->itr_setting;
+	if (adapter->rx_itr_setting <= 3)
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting;
 	else
-		ec->rx_coalesce_usecs = adapter->itr_setting >> 2;
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
+		if (adapter->tx_itr_setting <= 3)
+			ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+		else
+			ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+	}
 
 	return 0;
 }
 
-
 static int igb_nway_reset(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
@@ -1962,31 +1987,32 @@
 				  struct ethtool_stats *stats, u64 *data)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct net_device_stats *net_stats = &netdev->stats;
 	u64 *queue_stat;
-	int stat_count_tx = sizeof(struct igb_tx_queue_stats) / sizeof(u64);
-	int stat_count_rx = sizeof(struct igb_rx_queue_stats) / sizeof(u64);
-	int j;
-	int i;
+	int i, j, k;
+	char *p;
 
 	igb_update_stats(adapter);
+
 	for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+igb_gstrings_stats[i].stat_offset;
+		p = (char *)adapter + igb_gstrings_stats[i].stat_offset;
 		data[i] = (igb_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
+	for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) {
+		p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset;
+		data[i] = (igb_gstrings_net_stats[j].sizeof_stat ==
+			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
 	for (j = 0; j < adapter->num_tx_queues; j++) {
-		int k;
 		queue_stat = (u64 *)&adapter->tx_ring[j].tx_stats;
-		for (k = 0; k < stat_count_tx; k++)
-			data[i + k] = queue_stat[k];
-		i += k;
+		for (k = 0; k < IGB_TX_QUEUE_STATS_LEN; k++, i++)
+			data[i] = queue_stat[k];
 	}
 	for (j = 0; j < adapter->num_rx_queues; j++) {
-		int k;
 		queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats;
-		for (k = 0; k < stat_count_rx; k++)
-			data[i + k] = queue_stat[k];
-		i += k;
+		for (k = 0; k < IGB_RX_QUEUE_STATS_LEN; k++, i++)
+			data[i] = queue_stat[k];
 	}
 }
 
@@ -2007,11 +2033,18 @@
 			       ETH_GSTRING_LEN);
 			p += ETH_GSTRING_LEN;
 		}
+		for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) {
+			memcpy(p, igb_gstrings_net_stats[i].stat_string,
+			       ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
 		for (i = 0; i < adapter->num_tx_queues; i++) {
 			sprintf(p, "tx_queue_%u_packets", i);
 			p += ETH_GSTRING_LEN;
 			sprintf(p, "tx_queue_%u_bytes", i);
 			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_restart", i);
+			p += ETH_GSTRING_LEN;
 		}
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			sprintf(p, "rx_queue_%u_packets", i);
@@ -2020,6 +2053,10 @@
 			p += ETH_GSTRING_LEN;
 			sprintf(p, "rx_queue_%u_drops", i);
 			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_csum_err", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_alloc_failed", i);
+			p += ETH_GSTRING_LEN;
 		}
 /*		BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
 		break;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 714c3a4..16349ba 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -49,7 +49,7 @@
 #endif
 #include "igb.h"
 
-#define DRV_VERSION "1.3.16-k2"
+#define DRV_VERSION "2.1.0-k2"
 char igb_driver_name[] = "igb";
 char igb_driver_version[] = DRV_VERSION;
 static const char igb_driver_string[] =
@@ -61,8 +61,14 @@
 };
 
 static struct pci_device_id igb_pci_tbl[] = {
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
@@ -81,6 +87,7 @@
 static int igb_setup_all_rx_resources(struct igb_adapter *);
 static void igb_free_all_tx_resources(struct igb_adapter *);
 static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
 void igb_update_stats(struct igb_adapter *);
 static int igb_probe(struct pci_dev *, const struct pci_device_id *);
 static void __devexit igb_remove(struct pci_dev *pdev);
@@ -89,7 +96,6 @@
 static int igb_close(struct net_device *);
 static void igb_configure_tx(struct igb_adapter *);
 static void igb_configure_rx(struct igb_adapter *);
-static void igb_setup_rctl(struct igb_adapter *);
 static void igb_clean_all_tx_rings(struct igb_adapter *);
 static void igb_clean_all_rx_rings(struct igb_adapter *);
 static void igb_clean_tx_ring(struct igb_ring *);
@@ -98,28 +104,22 @@
 static void igb_update_phy_info(unsigned long);
 static void igb_watchdog(unsigned long);
 static void igb_watchdog_task(struct work_struct *);
-static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *,
-					   struct net_device *,
-					   struct igb_ring *);
-static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
-				      struct net_device *);
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
 static struct net_device_stats *igb_get_stats(struct net_device *);
 static int igb_change_mtu(struct net_device *, int);
 static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
 static irqreturn_t igb_intr(int irq, void *);
 static irqreturn_t igb_intr_msi(int irq, void *);
 static irqreturn_t igb_msix_other(int irq, void *);
-static irqreturn_t igb_msix_rx(int irq, void *);
-static irqreturn_t igb_msix_tx(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
 #ifdef CONFIG_IGB_DCA
-static void igb_update_rx_dca(struct igb_ring *);
-static void igb_update_tx_dca(struct igb_ring *);
+static void igb_update_dca(struct igb_q_vector *);
 static void igb_setup_dca(struct igb_adapter *);
 #endif /* CONFIG_IGB_DCA */
-static bool igb_clean_tx_irq(struct igb_ring *);
+static bool igb_clean_tx_irq(struct igb_q_vector *);
 static int igb_poll(struct napi_struct *, int);
-static bool igb_clean_rx_irq_adv(struct igb_ring *, int *, int);
-static void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
+static bool igb_clean_rx_irq_adv(struct igb_q_vector *, int *, int);
 static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
 static void igb_tx_timeout(struct net_device *);
 static void igb_reset_task(struct work_struct *);
@@ -127,57 +127,13 @@
 static void igb_vlan_rx_add_vid(struct net_device *, u16);
 static void igb_vlan_rx_kill_vid(struct net_device *, u16);
 static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
 static void igb_ping_all_vfs(struct igb_adapter *);
 static void igb_msg_task(struct igb_adapter *);
-static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
 static void igb_vmm_control(struct igb_adapter *);
-static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
-	u32 reg_data;
-
-	reg_data = rd32(E1000_VMOLR(vfn));
-	reg_data |= E1000_VMOLR_BAM |	 /* Accept broadcast */
-	            E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
-	            E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
-	            E1000_VMOLR_AUPE |   /* Accept untagged packets */
-	            E1000_VMOLR_STRVLAN; /* Strip vlan tags */
-	wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
-                                 int vfn)
-{
-	struct e1000_hw *hw = &adapter->hw;
-	u32 vmolr;
-
-	/* if it isn't the PF check to see if VFs are enabled and
-	 * increase the size to support vlan tags */
-	if (vfn < adapter->vfs_allocated_count &&
-	    adapter->vf_data[vfn].vlans_enabled)
-		size += VLAN_TAG_SIZE;
-
-	vmolr = rd32(E1000_VMOLR(vfn));
-	vmolr &= ~E1000_VMOLR_RLPML_MASK;
-	vmolr |= size | E1000_VMOLR_LPE;
-	wr32(E1000_VMOLR(vfn), vmolr);
-
-	return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
-	u32 reg_data;
-
-	reg_data = rd32(E1000_RAH(entry));
-	reg_data &= ~E1000_RAH_POOL_MASK;
-	reg_data |= E1000_RAH_POOL_1 << pool;;
-	wr32(E1000_RAH(entry), reg_data);
-}
-
 #ifdef CONFIG_PM
 static int igb_suspend(struct pci_dev *, pm_message_t);
 static int igb_resume(struct pci_dev *);
@@ -228,46 +184,12 @@
 	.err_handler = &igb_err_handler
 };
 
-static int global_quad_port_a; /* global quad port a indication */
-
 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 /**
- * Scale the NIC clock cycle by a large factor so that
- * relatively small clock corrections can be added or
- * substracted at each clock tick. The drawbacks of a
- * large factor are a) that the clock register overflows
- * more quickly (not such a big deal) and b) that the
- * increment per tick has to fit into 24 bits.
- *
- * Note that
- *   TIMINCA = IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS *
- *             IGB_TSYNC_SCALE
- *   TIMINCA += TIMINCA * adjustment [ppm] / 1e9
- *
- * The base scale factor is intentionally a power of two
- * so that the division in %struct timecounter can be done with
- * a shift.
- */
-#define IGB_TSYNC_SHIFT (19)
-#define IGB_TSYNC_SCALE (1<<IGB_TSYNC_SHIFT)
-
-/**
- * The duration of one clock cycle of the NIC.
- *
- * @todo This hard-coded value is part of the specification and might change
- * in future hardware revisions. Add revision check.
- */
-#define IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS 16
-
-#if (IGB_TSYNC_SCALE * IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS) >= (1<<24)
-# error IGB_TSYNC_SCALE and/or IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS are too large to fit into TIMINCA
-#endif
-
-/**
  * igb_read_clock - read raw cycle counter (to be used by time counter)
  */
 static cycle_t igb_read_clock(const struct cyclecounter *tc)
@@ -275,11 +197,21 @@
 	struct igb_adapter *adapter =
 		container_of(tc, struct igb_adapter, cycles);
 	struct e1000_hw *hw = &adapter->hw;
-	u64 stamp;
+	u64 stamp = 0;
+	int shift = 0;
 
-	stamp =  rd32(E1000_SYSTIML);
-	stamp |= (u64)rd32(E1000_SYSTIMH) << 32ULL;
+	/*
+	 * The timestamp latches on lowest register read. For the 82580
+	 * the lowest register is SYSTIMR instead of SYSTIML.  However we never
+	 * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
+	 */
+	if (hw->mac.type == e1000_82580) {
+		stamp = rd32(E1000_SYSTIMR) >> 8;
+		shift = IGB_82580_TSYNC_SHIFT;
+	}
 
+	stamp |= (u64)rd32(E1000_SYSTIML) << shift;
+	stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
 	return stamp;
 }
 
@@ -320,17 +252,6 @@
 #endif
 
 /**
- * igb_desc_unused - calculate if we have unused descriptors
- **/
-static int igb_desc_unused(struct igb_ring *ring)
-{
-	if (ring->next_to_clean > ring->next_to_use)
-		return ring->next_to_clean - ring->next_to_use - 1;
-
-	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
-}
-
-/**
  * igb_init_module - Driver Registration Routine
  *
  * igb_init_module is the first routine called when the driver is
@@ -344,12 +265,9 @@
 
 	printk(KERN_INFO "%s\n", igb_copyright);
 
-	global_quad_port_a = 0;
-
 #ifdef CONFIG_IGB_DCA
 	dca_register_notify(&dca_notifier);
 #endif
-
 	ret = pci_register_driver(&igb_driver);
 	return ret;
 }
@@ -382,8 +300,8 @@
  **/
 static void igb_cache_ring_register(struct igb_adapter *adapter)
 {
-	int i;
-	unsigned int rbase_offset = adapter->vfs_allocated_count;
+	int i = 0, j = 0;
+	u32 rbase_offset = adapter->vfs_allocated_count;
 
 	switch (adapter->hw.mac.type) {
 	case e1000_82576:
@@ -392,23 +310,37 @@
 		 * In order to avoid collision we start at the first free queue
 		 * and continue consuming queues in the same sequence
 		 */
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = rbase_offset +
-			                              Q_IDX_82576(i);
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = rbase_offset +
-			                              Q_IDX_82576(i);
-		break;
+		if (adapter->vfs_allocated_count) {
+			for (; i < adapter->rss_queues; i++)
+				adapter->rx_ring[i].reg_idx = rbase_offset +
+				                              Q_IDX_82576(i);
+			for (; j < adapter->rss_queues; j++)
+				adapter->tx_ring[j].reg_idx = rbase_offset +
+				                              Q_IDX_82576(j);
+		}
 	case e1000_82575:
+	case e1000_82580:
 	default:
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = i;
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = i;
+		for (; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i].reg_idx = rbase_offset + i;
+		for (; j < adapter->num_tx_queues; j++)
+			adapter->tx_ring[j].reg_idx = rbase_offset + j;
 		break;
 	}
 }
 
+static void igb_free_queues(struct igb_adapter *adapter)
+{
+	kfree(adapter->tx_ring);
+	kfree(adapter->rx_ring);
+
+	adapter->tx_ring = NULL;
+	adapter->rx_ring = NULL;
+
+	adapter->num_rx_queues = 0;
+	adapter->num_tx_queues = 0;
+}
+
 /**
  * igb_alloc_queues - Allocate memory for all rings
  * @adapter: board private structure to initialize
@@ -423,59 +355,61 @@
 	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
 				   sizeof(struct igb_ring), GFP_KERNEL);
 	if (!adapter->tx_ring)
-		return -ENOMEM;
+		goto err;
 
 	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
 				   sizeof(struct igb_ring), GFP_KERNEL);
-	if (!adapter->rx_ring) {
-		kfree(adapter->tx_ring);
-		return -ENOMEM;
-	}
-
-	adapter->rx_ring->buddy = adapter->tx_ring;
+	if (!adapter->rx_ring)
+		goto err;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		struct igb_ring *ring = &(adapter->tx_ring[i]);
 		ring->count = adapter->tx_ring_count;
-		ring->adapter = adapter;
 		ring->queue_index = i;
+		ring->pdev = adapter->pdev;
+		ring->netdev = adapter->netdev;
+		/* For 82575, context index must be unique per ring. */
+		if (adapter->hw.mac.type == e1000_82575)
+			ring->flags = IGB_RING_FLAG_TX_CTX_IDX;
 	}
+
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		struct igb_ring *ring = &(adapter->rx_ring[i]);
 		ring->count = adapter->rx_ring_count;
-		ring->adapter = adapter;
 		ring->queue_index = i;
-		ring->itr_register = E1000_ITR;
-
-		/* set a default napi handler for each rx_ring */
-		netif_napi_add(adapter->netdev, &ring->napi, igb_poll, 64);
+		ring->pdev = adapter->pdev;
+		ring->netdev = adapter->netdev;
+		ring->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+		ring->flags = IGB_RING_FLAG_RX_CSUM; /* enable rx checksum */
+		/* set flag indicating ring supports SCTP checksum offload */
+		if (adapter->hw.mac.type >= e1000_82576)
+			ring->flags |= IGB_RING_FLAG_RX_SCTP_CSUM;
 	}
 
 	igb_cache_ring_register(adapter);
+
 	return 0;
-}
 
-static void igb_free_queues(struct igb_adapter *adapter)
-{
-	int i;
+err:
+	igb_free_queues(adapter);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		netif_napi_del(&adapter->rx_ring[i].napi);
-
-	adapter->num_rx_queues = 0;
-	adapter->num_tx_queues = 0;
-
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
+	return -ENOMEM;
 }
 
 #define IGB_N0_QUEUE -1
-static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
-			      int tx_queue, int msix_vector)
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
 {
 	u32 msixbm = 0;
+	struct igb_adapter *adapter = q_vector->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ivar, index;
+	int rx_queue = IGB_N0_QUEUE;
+	int tx_queue = IGB_N0_QUEUE;
+
+	if (q_vector->rx_ring)
+		rx_queue = q_vector->rx_ring->reg_idx;
+	if (q_vector->tx_ring)
+		tx_queue = q_vector->tx_ring->reg_idx;
 
 	switch (hw->mac.type) {
 	case e1000_82575:
@@ -483,16 +417,12 @@
 		   bitmask for the EICR/EIMS/EIMC registers.  To assign one
 		   or more queues to a vector, we write the appropriate bits
 		   into the MSIXBM register for that vector. */
-		if (rx_queue > IGB_N0_QUEUE) {
+		if (rx_queue > IGB_N0_QUEUE)
 			msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
-			adapter->rx_ring[rx_queue].eims_value = msixbm;
-		}
-		if (tx_queue > IGB_N0_QUEUE) {
+		if (tx_queue > IGB_N0_QUEUE)
 			msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
-			adapter->tx_ring[tx_queue].eims_value =
-				  E1000_EICR_TX_QUEUE0 << tx_queue;
-		}
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+		q_vector->eims_value = msixbm;
 		break;
 	case e1000_82576:
 		/* 82576 uses a table-based method for assigning vectors.
@@ -500,7 +430,40 @@
 		   a vector number along with a "valid" bit.  Sadly, the layout
 		   of the table is somewhat counterintuitive. */
 		if (rx_queue > IGB_N0_QUEUE) {
-			index = (rx_queue >> 1) + adapter->vfs_allocated_count;
+			index = (rx_queue & 0x7);
+			ivar = array_rd32(E1000_IVAR0, index);
+			if (rx_queue < 8) {
+				/* vector goes into low byte of register */
+				ivar = ivar & 0xFFFFFF00;
+				ivar |= msix_vector | E1000_IVAR_VALID;
+			} else {
+				/* vector goes into third byte of register */
+				ivar = ivar & 0xFF00FFFF;
+				ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+			}
+			array_wr32(E1000_IVAR0, index, ivar);
+		}
+		if (tx_queue > IGB_N0_QUEUE) {
+			index = (tx_queue & 0x7);
+			ivar = array_rd32(E1000_IVAR0, index);
+			if (tx_queue < 8) {
+				/* vector goes into second byte of register */
+				ivar = ivar & 0xFFFF00FF;
+				ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+			} else {
+				/* vector goes into high byte of register */
+				ivar = ivar & 0x00FFFFFF;
+				ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+			}
+			array_wr32(E1000_IVAR0, index, ivar);
+		}
+		q_vector->eims_value = 1 << msix_vector;
+		break;
+	case e1000_82580:
+		/* 82580 uses the same table-based approach as 82576 but has fewer
+		   entries as a result we carry over for queues greater than 4. */
+		if (rx_queue > IGB_N0_QUEUE) {
+			index = (rx_queue >> 1);
 			ivar = array_rd32(E1000_IVAR0, index);
 			if (rx_queue & 0x1) {
 				/* vector goes into third byte of register */
@@ -511,11 +474,10 @@
 				ivar = ivar & 0xFFFFFF00;
 				ivar |= msix_vector | E1000_IVAR_VALID;
 			}
-			adapter->rx_ring[rx_queue].eims_value= 1 << msix_vector;
 			array_wr32(E1000_IVAR0, index, ivar);
 		}
 		if (tx_queue > IGB_N0_QUEUE) {
-			index = (tx_queue >> 1) + adapter->vfs_allocated_count;
+			index = (tx_queue >> 1);
 			ivar = array_rd32(E1000_IVAR0, index);
 			if (tx_queue & 0x1) {
 				/* vector goes into high byte of register */
@@ -526,9 +488,9 @@
 				ivar = ivar & 0xFFFF00FF;
 				ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
 			}
-			adapter->tx_ring[tx_queue].eims_value= 1 << msix_vector;
 			array_wr32(E1000_IVAR0, index, ivar);
 		}
+		q_vector->eims_value = 1 << msix_vector;
 		break;
 	default:
 		BUG();
@@ -549,43 +511,10 @@
 	struct e1000_hw *hw = &adapter->hw;
 
 	adapter->eims_enable_mask = 0;
-	if (hw->mac.type == e1000_82576)
-		/* Turn on MSI-X capability first, or our settings
-		 * won't stick.  And it will take days to debug. */
-		wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
-				   E1000_GPIE_PBA | E1000_GPIE_EIAME |
- 				   E1000_GPIE_NSICR);
-
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *tx_ring = &adapter->tx_ring[i];
-		igb_assign_vector(adapter, IGB_N0_QUEUE, i, vector++);
-		adapter->eims_enable_mask |= tx_ring->eims_value;
-		if (tx_ring->itr_val)
-			writel(tx_ring->itr_val,
-			       hw->hw_addr + tx_ring->itr_register);
-		else
-			writel(1, hw->hw_addr + tx_ring->itr_register);
-	}
-
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *rx_ring = &adapter->rx_ring[i];
-		rx_ring->buddy = NULL;
-		igb_assign_vector(adapter, i, IGB_N0_QUEUE, vector++);
-		adapter->eims_enable_mask |= rx_ring->eims_value;
-		if (rx_ring->itr_val)
-			writel(rx_ring->itr_val,
-			       hw->hw_addr + rx_ring->itr_register);
-		else
-			writel(1, hw->hw_addr + rx_ring->itr_register);
-	}
-
 
 	/* set vector for other causes, i.e. link changes */
 	switch (hw->mac.type) {
 	case e1000_82575:
-		array_wr32(E1000_MSIXBM(0), vector++,
-				      E1000_EIMS_OTHER);
-
 		tmp = rd32(E1000_CTRL_EXT);
 		/* enable MSI-X PBA support*/
 		tmp |= E1000_CTRL_EXT_PBA_CLR;
@@ -595,22 +524,41 @@
 		tmp |= E1000_CTRL_EXT_IRCA;
 
 		wr32(E1000_CTRL_EXT, tmp);
-		adapter->eims_enable_mask |= E1000_EIMS_OTHER;
+
+		/* enable msix_other interrupt */
+		array_wr32(E1000_MSIXBM(0), vector++,
+		                      E1000_EIMS_OTHER);
 		adapter->eims_other = E1000_EIMS_OTHER;
 
 		break;
 
 	case e1000_82576:
-		tmp = (vector++ | E1000_IVAR_VALID) << 8;
-		wr32(E1000_IVAR_MISC, tmp);
+	case e1000_82580:
+		/* Turn on MSI-X capability first, or our settings
+		 * won't stick.  And it will take days to debug. */
+		wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+		                E1000_GPIE_PBA | E1000_GPIE_EIAME |
+		                E1000_GPIE_NSICR);
 
-		adapter->eims_enable_mask = (1 << (vector)) - 1;
-		adapter->eims_other = 1 << (vector - 1);
+		/* enable msix_other interrupt */
+		adapter->eims_other = 1 << vector;
+		tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+		wr32(E1000_IVAR_MISC, tmp);
 		break;
 	default:
 		/* do nothing, since nothing else supports MSI-X */
 		break;
 	} /* switch (hw->mac.type) */
+
+	adapter->eims_enable_mask |= adapter->eims_other;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		igb_assign_vector(q_vector, vector++);
+		adapter->eims_enable_mask |= q_vector->eims_value;
+	}
+
 	wrfl();
 }
 
@@ -623,42 +571,39 @@
 static int igb_request_msix(struct igb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
 	int i, err = 0, vector = 0;
 
-	vector = 0;
-
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *ring = &(adapter->tx_ring[i]);
-		sprintf(ring->name, "%s-tx-%d", netdev->name, i);
-		err = request_irq(adapter->msix_entries[vector].vector,
-				  &igb_msix_tx, 0, ring->name,
-				  &(adapter->tx_ring[i]));
-		if (err)
-			goto out;
-		ring->itr_register = E1000_EITR(0) + (vector << 2);
-		ring->itr_val = 976; /* ~4000 ints/sec */
-		vector++;
-	}
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *ring = &(adapter->rx_ring[i]);
-		if (strlen(netdev->name) < (IFNAMSIZ - 5))
-			sprintf(ring->name, "%s-rx-%d", netdev->name, i);
-		else
-			memcpy(ring->name, netdev->name, IFNAMSIZ);
-		err = request_irq(adapter->msix_entries[vector].vector,
-				  &igb_msix_rx, 0, ring->name,
-				  &(adapter->rx_ring[i]));
-		if (err)
-			goto out;
-		ring->itr_register = E1000_EITR(0) + (vector << 2);
-		ring->itr_val = adapter->itr;
-		vector++;
-	}
-
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &igb_msix_other, 0, netdev->name, netdev);
+	                  igb_msix_other, 0, netdev->name, adapter);
 	if (err)
 		goto out;
+	vector++;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+		q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+		if (q_vector->rx_ring && q_vector->tx_ring)
+			sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+			        q_vector->rx_ring->queue_index);
+		else if (q_vector->tx_ring)
+			sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+			        q_vector->tx_ring->queue_index);
+		else if (q_vector->rx_ring)
+			sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+			        q_vector->rx_ring->queue_index);
+		else
+			sprintf(q_vector->name, "%s-unused", netdev->name);
+
+		err = request_irq(adapter->msix_entries[vector].vector,
+		                  igb_msix_ring, 0, q_vector->name,
+		                  q_vector);
+		if (err)
+			goto out;
+		vector++;
+	}
 
 	igb_configure_msix(adapter);
 	return 0;
@@ -672,11 +617,44 @@
 		pci_disable_msix(adapter->pdev);
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
-	} else if (adapter->flags & IGB_FLAG_HAS_MSI)
+	} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
 		pci_disable_msi(adapter->pdev);
-	return;
+	}
 }
 
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+	int v_idx;
+
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+		adapter->q_vector[v_idx] = NULL;
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+	}
+	adapter->num_q_vectors = 0;
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ *
+ * This function resets the device so that it has 0 rx queues, tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+	igb_free_queues(adapter);
+	igb_free_q_vectors(adapter);
+	igb_reset_interrupt_capability(adapter);
+}
 
 /**
  * igb_set_interrupt_capability - set MSI or MSI-X if supported
@@ -690,11 +668,21 @@
 	int numvecs, i;
 
 	/* Number of supported queues. */
-	/* Having more queues than CPUs doesn't make sense. */
-	adapter->num_rx_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
-	adapter->num_tx_queues = min_t(u32, IGB_MAX_TX_QUEUES, num_online_cpus());
+	adapter->num_rx_queues = adapter->rss_queues;
+	adapter->num_tx_queues = adapter->rss_queues;
 
-	numvecs = adapter->num_tx_queues + adapter->num_rx_queues + 1;
+	/* start with one vector for every rx queue */
+	numvecs = adapter->num_rx_queues;
+
+	/* if tx handler is seperate add 1 for every tx queue */
+	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+		numvecs += adapter->num_tx_queues;
+
+	/* store the number of vectors reserved for queues */
+	adapter->num_q_vectors = numvecs;
+
+	/* add 1 vector for link status interrupts */
+	numvecs++;
 	adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
 					GFP_KERNEL);
 	if (!adapter->msix_entries)
@@ -728,8 +716,12 @@
 		dev_info(&adapter->pdev->dev, "IOV Disabled\n");
 	}
 #endif
+	adapter->vfs_allocated_count = 0;
+	adapter->rss_queues = 1;
+	adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
 	adapter->num_rx_queues = 1;
 	adapter->num_tx_queues = 1;
+	adapter->num_q_vectors = 1;
 	if (!pci_enable_msi(adapter->pdev))
 		adapter->flags |= IGB_FLAG_HAS_MSI;
 out:
@@ -739,6 +731,143 @@
 }
 
 /**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+	struct igb_q_vector *q_vector;
+	struct e1000_hw *hw = &adapter->hw;
+	int v_idx;
+
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		q_vector = kzalloc(sizeof(struct igb_q_vector), GFP_KERNEL);
+		if (!q_vector)
+			goto err_out;
+		q_vector->adapter = adapter;
+		q_vector->itr_shift = (hw->mac.type == e1000_82575) ? 16 : 0;
+		q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
+		q_vector->itr_val = IGB_START_ITR;
+		q_vector->set_itr = 1;
+		netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
+		adapter->q_vector[v_idx] = q_vector;
+	}
+	return 0;
+
+err_out:
+	while (v_idx) {
+		v_idx--;
+		q_vector = adapter->q_vector[v_idx];
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+		adapter->q_vector[v_idx] = NULL;
+	}
+	return -ENOMEM;
+}
+
+static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
+                                      int ring_idx, int v_idx)
+{
+	struct igb_q_vector *q_vector;
+
+	q_vector = adapter->q_vector[v_idx];
+	q_vector->rx_ring = &adapter->rx_ring[ring_idx];
+	q_vector->rx_ring->q_vector = q_vector;
+	q_vector->itr_val = adapter->rx_itr_setting;
+	if (q_vector->itr_val && q_vector->itr_val <= 3)
+		q_vector->itr_val = IGB_START_ITR;
+}
+
+static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
+                                      int ring_idx, int v_idx)
+{
+	struct igb_q_vector *q_vector;
+
+	q_vector = adapter->q_vector[v_idx];
+	q_vector->tx_ring = &adapter->tx_ring[ring_idx];
+	q_vector->tx_ring->q_vector = q_vector;
+	q_vector->itr_val = adapter->tx_itr_setting;
+	if (q_vector->itr_val && q_vector->itr_val <= 3)
+		q_vector->itr_val = IGB_START_ITR;
+}
+
+/**
+ * igb_map_ring_to_vector - maps allocated queues to vectors
+ *
+ * This function maps the recently allocated queues to vectors.
+ **/
+static int igb_map_ring_to_vector(struct igb_adapter *adapter)
+{
+	int i;
+	int v_idx = 0;
+
+	if ((adapter->num_q_vectors < adapter->num_rx_queues) ||
+	    (adapter->num_q_vectors < adapter->num_tx_queues))
+		return -ENOMEM;
+
+	if (adapter->num_q_vectors >=
+	    (adapter->num_rx_queues + adapter->num_tx_queues)) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+	} else {
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			if (i < adapter->num_tx_queues)
+				igb_map_tx_ring_to_vector(adapter, i, v_idx);
+			igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+		}
+		for (; i < adapter->num_tx_queues; i++)
+			igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+	}
+	return 0;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+
+	igb_set_interrupt_capability(adapter);
+
+	err = igb_alloc_q_vectors(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	err = igb_alloc_queues(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		goto err_alloc_queues;
+	}
+
+	err = igb_map_ring_to_vector(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Invalid q_vector to ring mapping\n");
+		goto err_map_queues;
+	}
+
+
+	return 0;
+err_map_queues:
+	igb_free_queues(adapter);
+err_alloc_queues:
+	igb_free_q_vectors(adapter);
+err_alloc_q_vectors:
+	igb_reset_interrupt_capability(adapter);
+	return err;
+}
+
+/**
  * igb_request_irq - initialize interrupts
  *
  * Attempts to configure interrupts using the best available
@@ -747,6 +876,7 @@
 static int igb_request_irq(struct igb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	int err = 0;
 
@@ -755,19 +885,38 @@
 		if (!err)
 			goto request_done;
 		/* fall back to MSI */
-		igb_reset_interrupt_capability(adapter);
+		igb_clear_interrupt_scheme(adapter);
 		if (!pci_enable_msi(adapter->pdev))
 			adapter->flags |= IGB_FLAG_HAS_MSI;
 		igb_free_all_tx_resources(adapter);
 		igb_free_all_rx_resources(adapter);
+		adapter->num_tx_queues = 1;
 		adapter->num_rx_queues = 1;
-		igb_alloc_queues(adapter);
+		adapter->num_q_vectors = 1;
+		err = igb_alloc_q_vectors(adapter);
+		if (err) {
+			dev_err(&pdev->dev,
+			        "Unable to allocate memory for vectors\n");
+			goto request_done;
+		}
+		err = igb_alloc_queues(adapter);
+		if (err) {
+			dev_err(&pdev->dev,
+			        "Unable to allocate memory for queues\n");
+			igb_free_q_vectors(adapter);
+			goto request_done;
+		}
+		igb_setup_all_tx_resources(adapter);
+		igb_setup_all_rx_resources(adapter);
 	} else {
 		switch (hw->mac.type) {
 		case e1000_82575:
 			wr32(E1000_MSIXBM(0),
-			     (E1000_EICR_RX_QUEUE0 | E1000_EIMS_OTHER));
+			     (E1000_EICR_RX_QUEUE0 |
+			      E1000_EICR_TX_QUEUE0 |
+			      E1000_EIMS_OTHER));
 			break;
+		case e1000_82580:
 		case e1000_82576:
 			wr32(E1000_IVAR0, E1000_IVAR_VALID);
 			break;
@@ -777,17 +926,18 @@
 	}
 
 	if (adapter->flags & IGB_FLAG_HAS_MSI) {
-		err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0,
-				  netdev->name, netdev);
+		err = request_irq(adapter->pdev->irq, igb_intr_msi, 0,
+				  netdev->name, adapter);
 		if (!err)
 			goto request_done;
+
 		/* fall back to legacy interrupts */
 		igb_reset_interrupt_capability(adapter);
 		adapter->flags &= ~IGB_FLAG_HAS_MSI;
 	}
 
-	err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
-			  netdev->name, netdev);
+	err = request_irq(adapter->pdev->irq, igb_intr, IRQF_SHARED,
+			  netdev->name, adapter);
 
 	if (err)
 		dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
@@ -799,23 +949,19 @@
 
 static void igb_free_irq(struct igb_adapter *adapter)
 {
-	struct net_device *netdev = adapter->netdev;
-
 	if (adapter->msix_entries) {
 		int vector = 0, i;
 
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			free_irq(adapter->msix_entries[vector++].vector,
-				&(adapter->tx_ring[i]));
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			free_irq(adapter->msix_entries[vector++].vector,
-				&(adapter->rx_ring[i]));
+		free_irq(adapter->msix_entries[vector++].vector, adapter);
 
-		free_irq(adapter->msix_entries[vector++].vector, netdev);
-		return;
+		for (i = 0; i < adapter->num_q_vectors; i++) {
+			struct igb_q_vector *q_vector = adapter->q_vector[i];
+			free_irq(adapter->msix_entries[vector++].vector,
+			         q_vector);
+		}
+	} else {
+		free_irq(adapter->pdev->irq, adapter);
 	}
-
-	free_irq(adapter->pdev->irq, netdev);
 }
 
 /**
@@ -826,6 +972,11 @@
 {
 	struct e1000_hw *hw = &adapter->hw;
 
+	/*
+	 * we need to be careful when disabling interrupts.  The VFs are also
+	 * mapped into these registers and so clearing the bits can cause
+	 * issues on the VF drivers so we only need to clear what we set
+	 */
 	if (adapter->msix_entries) {
 		u32 regval = rd32(E1000_EIAM);
 		wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
@@ -849,41 +1000,47 @@
 	struct e1000_hw *hw = &adapter->hw;
 
 	if (adapter->msix_entries) {
+		u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC;
 		u32 regval = rd32(E1000_EIAC);
 		wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
 		regval = rd32(E1000_EIAM);
 		wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
 		wr32(E1000_EIMS, adapter->eims_enable_mask);
-		if (adapter->vfs_allocated_count)
+		if (adapter->vfs_allocated_count) {
 			wr32(E1000_MBVFIMR, 0xFF);
-		wr32(E1000_IMS, (E1000_IMS_LSC | E1000_IMS_VMMB |
-		                 E1000_IMS_DOUTSYNC));
+			ims |= E1000_IMS_VMMB;
+		}
+		if (adapter->hw.mac.type == e1000_82580)
+			ims |= E1000_IMS_DRSTA;
+
+		wr32(E1000_IMS, ims);
 	} else {
-		wr32(E1000_IMS, IMS_ENABLE_MASK);
-		wr32(E1000_IAM, IMS_ENABLE_MASK);
+		wr32(E1000_IMS, IMS_ENABLE_MASK |
+				E1000_IMS_DRSTA);
+		wr32(E1000_IAM, IMS_ENABLE_MASK |
+				E1000_IMS_DRSTA);
 	}
 }
 
 static void igb_update_mng_vlan(struct igb_adapter *adapter)
 {
-	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
 	u16 vid = adapter->hw.mng_cookie.vlan_id;
 	u16 old_vid = adapter->mng_vlan_id;
-	if (adapter->vlgrp) {
-		if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-			if (adapter->hw.mng_cookie.status &
-				E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
-				igb_vlan_rx_add_vid(netdev, vid);
-				adapter->mng_vlan_id = vid;
-			} else
-				adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
 
-			if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
-					(vid != old_vid) &&
-			    !vlan_group_get_device(adapter->vlgrp, old_vid))
-				igb_vlan_rx_kill_vid(netdev, old_vid);
-		} else
-			adapter->mng_vlan_id = vid;
+	if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+		/* add VID to filter table */
+		igb_vfta_set(hw, vid, true);
+		adapter->mng_vlan_id = vid;
+	} else {
+		adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+	}
+
+	if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+	    (vid != old_vid) &&
+	    !vlan_group_get_device(adapter->vlgrp, old_vid)) {
+		/* remove VID from filter table */
+		igb_vfta_set(hw, old_vid, false);
 	}
 }
 
@@ -907,7 +1064,6 @@
 			ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 }
 
-
 /**
  * igb_get_hw_control - get control of the h/w from f/w
  * @adapter: address of board private structure
@@ -942,8 +1098,11 @@
 
 	igb_restore_vlan(adapter);
 
-	igb_configure_tx(adapter);
+	igb_setup_tctl(adapter);
+	igb_setup_mrqc(adapter);
 	igb_setup_rctl(adapter);
+
+	igb_configure_tx(adapter);
 	igb_configure_rx(adapter);
 
 	igb_rx_fifo_flush_82575(&adapter->hw);
@@ -965,7 +1124,6 @@
  * igb_up - Open the interface and prepare it to handle traffic
  * @adapter: board private structure
  **/
-
 int igb_up(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
@@ -976,30 +1134,37 @@
 
 	clear_bit(__IGB_DOWN, &adapter->state);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		napi_enable(&adapter->rx_ring[i].napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		napi_enable(&q_vector->napi);
+	}
 	if (adapter->msix_entries)
 		igb_configure_msix(adapter);
 
-	igb_vmm_control(adapter);
-	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
-	igb_set_vmolr(hw, adapter->vfs_allocated_count);
-
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
 	igb_irq_enable(adapter);
 
+	/* notify VFs that reset has been completed */
+	if (adapter->vfs_allocated_count) {
+		u32 reg_data = rd32(E1000_CTRL_EXT);
+		reg_data |= E1000_CTRL_EXT_PFRSTD;
+		wr32(E1000_CTRL_EXT, reg_data);
+	}
+
 	netif_tx_start_all_queues(adapter->netdev);
 
-	/* Fire a link change interrupt to start the watchdog. */
-	wr32(E1000_ICS, E1000_ICS_LSC);
+	/* start the watchdog. */
+	hw->mac.get_link_status = 1;
+	schedule_work(&adapter->watchdog_task);
+
 	return 0;
 }
 
 void igb_down(struct igb_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
 	u32 tctl, rctl;
 	int i;
 
@@ -1022,8 +1187,10 @@
 	wrfl();
 	msleep(10);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		napi_disable(&adapter->rx_ring[i].napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		napi_disable(&q_vector->napi);
+	}
 
 	igb_irq_disable(adapter);
 
@@ -1062,6 +1229,7 @@
 
 void igb_reset(struct igb_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_fc_info *fc = &hw->fc;
@@ -1072,8 +1240,13 @@
 	 * To take effect CTRL.RST is required.
 	 */
 	switch (mac->type) {
+	case e1000_82580:
+		pba = rd32(E1000_RXPBS);
+		pba = igb_rxpbs_adjust_82580(pba);
+		break;
 	case e1000_82576:
-		pba = E1000_PBA_64K;
+		pba = rd32(E1000_RXPBS);
+		pba &= E1000_RXPBS_SIZE_MASK_82576;
 		break;
 	case e1000_82575:
 	default:
@@ -1148,10 +1321,10 @@
 	if (adapter->vfs_allocated_count) {
 		int i;
 		for (i = 0 ; i < adapter->vfs_allocated_count; i++)
-			adapter->vf_data[i].clear_to_send = false;
+			adapter->vf_data[i].flags = 0;
 
 		/* ping all the active vfs to let them know we are going down */
-			igb_ping_all_vfs(adapter);
+		igb_ping_all_vfs(adapter);
 
 		/* disable transmits and receives */
 		wr32(E1000_VFRE, 0);
@@ -1159,23 +1332,28 @@
 	}
 
 	/* Allow time for pending master requests to run */
-	adapter->hw.mac.ops.reset_hw(&adapter->hw);
+	hw->mac.ops.reset_hw(hw);
 	wr32(E1000_WUC, 0);
 
-	if (adapter->hw.mac.ops.init_hw(&adapter->hw))
-		dev_err(&adapter->pdev->dev, "Hardware Error\n");
+	if (hw->mac.ops.init_hw(hw))
+		dev_err(&pdev->dev, "Hardware Error\n");
 
+	if (hw->mac.type == e1000_82580) {
+		u32 reg = rd32(E1000_PCIEMISC);
+		wr32(E1000_PCIEMISC,
+		                reg & ~E1000_PCIEMISC_LX_DECISION);
+	}
 	igb_update_mng_vlan(adapter);
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 	wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
 
-	igb_reset_adaptive(&adapter->hw);
-	igb_get_phy_info(&adapter->hw);
+	igb_reset_adaptive(hw);
+	igb_get_phy_info(hw);
 }
 
 static const struct net_device_ops igb_netdev_ops = {
-	.ndo_open 		= igb_open,
+	.ndo_open		= igb_open,
 	.ndo_stop		= igb_close,
 	.ndo_start_xmit		= igb_xmit_frame_adv,
 	.ndo_get_stats		= igb_get_stats,
@@ -1211,10 +1389,11 @@
 	struct net_device *netdev;
 	struct igb_adapter *adapter;
 	struct e1000_hw *hw;
+	u16 eeprom_data = 0;
+	static int global_quad_port_a; /* global quad port a indication */
 	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
 	unsigned long mmio_start, mmio_len;
 	int err, pci_using_dac;
-	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
 	u32 part_num;
 
@@ -1291,8 +1470,6 @@
 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 	hw->subsystem_device_id = pdev->subsystem_device;
 
-	/* setup the private structure */
-	hw->back = adapter;
 	/* Copy the default MAC, PHY and NVM function pointers */
 	memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
 	memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
@@ -1302,46 +1479,6 @@
 	if (err)
 		goto err_sw_init;
 
-#ifdef CONFIG_PCI_IOV
-	/* since iov functionality isn't critical to base device function we
-	 * can accept failure.  If it fails we don't allow iov to be enabled */
-	if (hw->mac.type == e1000_82576) {
-		/* 82576 supports a maximum of 7 VFs in addition to the PF */
-		unsigned int num_vfs = (max_vfs > 7) ? 7 : max_vfs;
-		int i;
-		unsigned char mac_addr[ETH_ALEN];
-
-		if (num_vfs) {
-			adapter->vf_data = kcalloc(num_vfs,
-						sizeof(struct vf_data_storage),
-						GFP_KERNEL);
-			if (!adapter->vf_data) {
-				dev_err(&pdev->dev,
-				        "Could not allocate VF private data - "
-					"IOV enable failed\n");
-			} else {
-				err = pci_enable_sriov(pdev, num_vfs);
-				if (!err) {
-					adapter->vfs_allocated_count = num_vfs;
-					dev_info(&pdev->dev,
-					         "%d vfs allocated\n",
-					         num_vfs);
-					for (i = 0;
-					     i < adapter->vfs_allocated_count;
-					     i++) {
-						random_ether_addr(mac_addr);
-						igb_set_vf_mac(adapter, i,
-						               mac_addr);
-					}
-				} else {
-					kfree(adapter->vf_data);
-					adapter->vf_data = NULL;
-				}
-			}
-		}
-	}
-
-#endif
 	/* setup the private structure */
 	err = igb_sw_init(adapter);
 	if (err)
@@ -1349,16 +1486,6 @@
 
 	igb_get_bus_info_pcie(hw);
 
-	/* set flags */
-	switch (hw->mac.type) {
-	case e1000_82575:
-		adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
-		break;
-	case e1000_82576:
-	default:
-		break;
-	}
-
 	hw->phy.autoneg_wait_to_complete = false;
 	hw->mac.adaptive_ifs = true;
 
@@ -1382,7 +1509,6 @@
 	netdev->features |= NETIF_F_IPV6_CSUM;
 	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_TSO6;
-
 	netdev->features |= NETIF_F_GRO;
 
 	netdev->vlan_features |= NETIF_F_TSO;
@@ -1394,10 +1520,10 @@
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	if (adapter->hw.mac.type == e1000_82576)
+	if (hw->mac.type >= e1000_82576)
 		netdev->features |= NETIF_F_SCTP_CSUM;
 
-	adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
+	adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
 
 	/* before reading the NVM, reset the controller to put the device in a
 	 * known good starting state */
@@ -1439,9 +1565,6 @@
 	hw->fc.requested_mode = e1000_fc_default;
 	hw->fc.current_mode = e1000_fc_default;
 
-	adapter->itr_setting = IGB_DEFAULT_ITR;
-	adapter->itr = IGB_START_ITR;
-
 	igb_validate_mdi_setting(hw);
 
 	/* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
@@ -1450,6 +1573,10 @@
 
 	if (hw->bus.func == 0)
 		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+	else if (hw->mac.type == e1000_82580)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+		                 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+		                 &eeprom_data);
 	else if (hw->bus.func == 1)
 		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
 
@@ -1508,66 +1635,14 @@
 		dev_info(&pdev->dev, "DCA enabled\n");
 		igb_setup_dca(adapter);
 	}
+
 #endif
-
-	/*
-	 * Initialize hardware timer: we keep it running just in case
-	 * that some program needs it later on.
-	 */
-	memset(&adapter->cycles, 0, sizeof(adapter->cycles));
-	adapter->cycles.read = igb_read_clock;
-	adapter->cycles.mask = CLOCKSOURCE_MASK(64);
-	adapter->cycles.mult = 1;
-	adapter->cycles.shift = IGB_TSYNC_SHIFT;
-	wr32(E1000_TIMINCA,
-	     (1<<24) |
-	     IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS * IGB_TSYNC_SCALE);
-#if 0
-	/*
-	 * Avoid rollover while we initialize by resetting the time counter.
-	 */
-	wr32(E1000_SYSTIML, 0x00000000);
-	wr32(E1000_SYSTIMH, 0x00000000);
-#else
-	/*
-	 * Set registers so that rollover occurs soon to test this.
-	 */
-	wr32(E1000_SYSTIML, 0x00000000);
-	wr32(E1000_SYSTIMH, 0xFF800000);
-#endif
-	wrfl();
-	timecounter_init(&adapter->clock,
-			 &adapter->cycles,
-			 ktime_to_ns(ktime_get_real()));
-
-	/*
-	 * Synchronize our NIC clock against system wall clock. NIC
-	 * time stamp reading requires ~3us per sample, each sample
-	 * was pretty stable even under load => only require 10
-	 * samples for each offset comparison.
-	 */
-	memset(&adapter->compare, 0, sizeof(adapter->compare));
-	adapter->compare.source = &adapter->clock;
-	adapter->compare.target = ktime_get_real;
-	adapter->compare.num_samples = 10;
-	timecompare_update(&adapter->compare, 0);
-
-#ifdef DEBUG
-	{
-		char buffer[160];
-		printk(KERN_DEBUG
-			"igb: %s: hw %p initialized timer\n",
-			igb_get_time_str(adapter, buffer),
-			&adapter->hw);
-	}
-#endif
-
 	dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
 	/* print bus type/speed/width info */
 	dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
 		 netdev->name,
-		 ((hw->bus.speed == e1000_bus_speed_2500)
-		  ? "2.5Gb/s" : "unknown"),
+		 ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+		                                            "unknown"),
 		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
 		  (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
 		  (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
@@ -1594,15 +1669,14 @@
 
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-
-	igb_free_queues(adapter);
 err_sw_init:
+	igb_clear_interrupt_scheme(adapter);
 	iounmap(hw->hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev, pci_select_bars(pdev,
-	                             IORESOURCE_MEM));
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -1647,12 +1721,10 @@
 
 	unregister_netdev(netdev);
 
-	if (!igb_check_reset_block(&adapter->hw))
-		igb_reset_phy(&adapter->hw);
+	if (!igb_check_reset_block(hw))
+		igb_reset_phy(hw);
 
-	igb_reset_interrupt_capability(adapter);
-
-	igb_free_queues(adapter);
+	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PCI_IOV
 	/* reclaim resources allocated to VFs */
@@ -1668,11 +1740,12 @@
 		dev_info(&pdev->dev, "IOV Disabled\n");
 	}
 #endif
+
 	iounmap(hw->hw_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-	pci_release_selected_regions(pdev, pci_select_bars(pdev,
-	                             IORESOURCE_MEM));
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 
 	free_netdev(netdev);
 
@@ -1682,6 +1755,160 @@
 }
 
 /**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs.  The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
+{
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev *pdev = adapter->pdev;
+
+	if (adapter->vfs_allocated_count > 7)
+		adapter->vfs_allocated_count = 7;
+
+	if (adapter->vfs_allocated_count) {
+		adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+		                           sizeof(struct vf_data_storage),
+		                           GFP_KERNEL);
+		/* if allocation failed then we do not support SR-IOV */
+		if (!adapter->vf_data) {
+			adapter->vfs_allocated_count = 0;
+			dev_err(&pdev->dev, "Unable to allocate memory for VF "
+			        "Data Storage\n");
+		}
+	}
+
+	if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) {
+		kfree(adapter->vf_data);
+		adapter->vf_data = NULL;
+#endif /* CONFIG_PCI_IOV */
+		adapter->vfs_allocated_count = 0;
+#ifdef CONFIG_PCI_IOV
+	} else {
+		unsigned char mac_addr[ETH_ALEN];
+		int i;
+		dev_info(&pdev->dev, "%d vfs allocated\n",
+		         adapter->vfs_allocated_count);
+		for (i = 0; i < adapter->vfs_allocated_count; i++) {
+			random_ether_addr(mac_addr);
+			igb_set_vf_mac(adapter, i, mac_addr);
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
+}
+
+
+/**
+ * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
+ * @adapter: board private structure to initialize
+ *
+ * igb_init_hw_timer initializes the function pointer and values for the hw
+ * timer found in hardware.
+ **/
+static void igb_init_hw_timer(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+
+	switch (hw->mac.type) {
+	case e1000_82580:
+		memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+		adapter->cycles.read = igb_read_clock;
+		adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+		adapter->cycles.mult = 1;
+		/*
+		 * The 82580 timesync updates the system timer every 8ns by 8ns
+		 * and the value cannot be shifted.  Instead we need to shift
+		 * the registers to generate a 64bit timer value.  As a result
+		 * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
+		 * 24 in order to generate a larger value for synchronization.
+		 */
+		adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
+		/* disable system timer temporarily by setting bit 31 */
+		wr32(E1000_TSAUXC, 0x80000000);
+		wrfl();
+
+		/* Set registers so that rollover occurs soon to test this. */
+		wr32(E1000_SYSTIMR, 0x00000000);
+		wr32(E1000_SYSTIML, 0x80000000);
+		wr32(E1000_SYSTIMH, 0x000000FF);
+		wrfl();
+
+		/* enable system timer by clearing bit 31 */
+		wr32(E1000_TSAUXC, 0x0);
+		wrfl();
+
+		timecounter_init(&adapter->clock,
+				 &adapter->cycles,
+				 ktime_to_ns(ktime_get_real()));
+		/*
+		 * Synchronize our NIC clock against system wall clock. NIC
+		 * time stamp reading requires ~3us per sample, each sample
+		 * was pretty stable even under load => only require 10
+		 * samples for each offset comparison.
+		 */
+		memset(&adapter->compare, 0, sizeof(adapter->compare));
+		adapter->compare.source = &adapter->clock;
+		adapter->compare.target = ktime_get_real;
+		adapter->compare.num_samples = 10;
+		timecompare_update(&adapter->compare, 0);
+		break;
+	case e1000_82576:
+		/*
+		 * Initialize hardware timer: we keep it running just in case
+		 * that some program needs it later on.
+		 */
+		memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+		adapter->cycles.read = igb_read_clock;
+		adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+		adapter->cycles.mult = 1;
+		/**
+		 * Scale the NIC clock cycle by a large factor so that
+		 * relatively small clock corrections can be added or
+		 * substracted at each clock tick. The drawbacks of a large
+		 * factor are a) that the clock register overflows more quickly
+		 * (not such a big deal) and b) that the increment per tick has
+		 * to fit into 24 bits.  As a result we need to use a shift of
+		 * 19 so we can fit a value of 16 into the TIMINCA register.
+		 */
+		adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
+		wr32(E1000_TIMINCA,
+		                (1 << E1000_TIMINCA_16NS_SHIFT) |
+		                (16 << IGB_82576_TSYNC_SHIFT));
+
+		/* Set registers so that rollover occurs soon to test this. */
+		wr32(E1000_SYSTIML, 0x00000000);
+		wr32(E1000_SYSTIMH, 0xFF800000);
+		wrfl();
+
+		timecounter_init(&adapter->clock,
+				 &adapter->cycles,
+				 ktime_to_ns(ktime_get_real()));
+		/*
+		 * Synchronize our NIC clock against system wall clock. NIC
+		 * time stamp reading requires ~3us per sample, each sample
+		 * was pretty stable even under load => only require 10
+		 * samples for each offset comparison.
+		 */
+		memset(&adapter->compare, 0, sizeof(adapter->compare));
+		adapter->compare.source = &adapter->clock;
+		adapter->compare.target = ktime_get_real;
+		adapter->compare.num_samples = 10;
+		timecompare_update(&adapter->compare, 0);
+		break;
+	case e1000_82575:
+		/* 82575 does not support timesync */
+	default:
+		break;
+	}
+
+}
+
+/**
  * igb_sw_init - Initialize general software structures (struct igb_adapter)
  * @adapter: board private structure to initialize
  *
@@ -1699,20 +1926,37 @@
 
 	adapter->tx_ring_count = IGB_DEFAULT_TXD;
 	adapter->rx_ring_count = IGB_DEFAULT_RXD;
-	adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
-	adapter->rx_ps_hdr_size = 0; /* disable packet split */
+	adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+	adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
 	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 
-	/* This call may decrease the number of queues depending on
-	 * interrupt mode. */
-	igb_set_interrupt_capability(adapter);
+#ifdef CONFIG_PCI_IOV
+	if (hw->mac.type == e1000_82576)
+		adapter->vfs_allocated_count = max_vfs;
 
-	if (igb_alloc_queues(adapter)) {
+#endif /* CONFIG_PCI_IOV */
+	adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+
+	/*
+	 * if rss_queues > 4 or vfs are going to be allocated with rss_queues
+	 * then we should combine the queues into a queue pair in order to
+	 * conserve interrupts due to limited supply
+	 */
+	if ((adapter->rss_queues > 4) ||
+	    ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
+		adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+
+	/* This call may decrease the number of queues */
+	if (igb_init_interrupt_scheme(adapter)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;
 	}
 
+	igb_init_hw_timer(adapter);
+	igb_probe_vfs(adapter);
+
 	/* Explicitly disable IRQ since the NIC can be in any state. */
 	igb_irq_disable(adapter);
 
@@ -1757,21 +2001,12 @@
 
 	/* e1000_power_up_phy(adapter); */
 
-	adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
-	if ((adapter->hw.mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
-		igb_update_mng_vlan(adapter);
-
 	/* before we allocate an interrupt, we must be ready to handle it.
 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
 	 * as soon as we call pci_request_irq, so we have to setup our
 	 * clean_rx handler before we do so.  */
 	igb_configure(adapter);
 
-	igb_vmm_control(adapter);
-	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
-	igb_set_vmolr(hw, adapter->vfs_allocated_count);
-
 	err = igb_request_irq(adapter);
 	if (err)
 		goto err_req_irq;
@@ -1779,18 +2014,28 @@
 	/* From here on the code is the same as igb_up() */
 	clear_bit(__IGB_DOWN, &adapter->state);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		napi_enable(&adapter->rx_ring[i].napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		napi_enable(&q_vector->napi);
+	}
 
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
 
 	igb_irq_enable(adapter);
 
+	/* notify VFs that reset has been completed */
+	if (adapter->vfs_allocated_count) {
+		u32 reg_data = rd32(E1000_CTRL_EXT);
+		reg_data |= E1000_CTRL_EXT_PFRSTD;
+		wr32(E1000_CTRL_EXT, reg_data);
+	}
+
 	netif_tx_start_all_queues(netdev);
 
-	/* Fire a link status change interrupt to start the watchdog. */
-	wr32(E1000_ICS, E1000_ICS_LSC);
+	/* start the watchdog. */
+	hw->mac.get_link_status = 1;
+	schedule_work(&adapter->watchdog_task);
 
 	return 0;
 
@@ -1829,28 +2074,18 @@
 	igb_free_all_tx_resources(adapter);
 	igb_free_all_rx_resources(adapter);
 
-	/* kill manageability vlan ID if supported, but not if a vlan with
-	 * the same ID is registered on the host OS (let 8021q kill it) */
-	if ((adapter->hw.mng_cookie.status &
-			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	     !(adapter->vlgrp &&
-	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
-		igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-
 	return 0;
 }
 
 /**
  * igb_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
  * @tx_ring: tx descriptor ring (for a specific queue) to setup
  *
  * Return 0 on success, negative on failure
  **/
-int igb_setup_tx_resources(struct igb_adapter *adapter,
-			   struct igb_ring *tx_ring)
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *pdev = tx_ring->pdev;
 	int size;
 
 	size = sizeof(struct igb_buffer) * tx_ring->count;
@@ -1863,20 +2098,20 @@
 	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 
-	tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+	tx_ring->desc = pci_alloc_consistent(pdev,
+	                                     tx_ring->size,
 					     &tx_ring->dma);
 
 	if (!tx_ring->desc)
 		goto err;
 
-	tx_ring->adapter = adapter;
 	tx_ring->next_to_use = 0;
 	tx_ring->next_to_clean = 0;
 	return 0;
 
 err:
 	vfree(tx_ring->buffer_info);
-	dev_err(&adapter->pdev->dev,
+	dev_err(&pdev->dev,
 		"Unable to allocate memory for the transmit descriptor ring\n");
 	return -ENOMEM;
 }
@@ -1890,13 +2125,13 @@
  **/
 static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	int i, err = 0;
-	int r_idx;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		err = igb_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+		err = igb_setup_tx_resources(&adapter->tx_ring[i]);
 		if (err) {
-			dev_err(&adapter->pdev->dev,
+			dev_err(&pdev->dev,
 				"Allocation for Tx Queue %u failed\n", i);
 			for (i--; i >= 0; i--)
 				igb_free_tx_resources(&adapter->tx_ring[i]);
@@ -1904,14 +2139,81 @@
 		}
 	}
 
-	for (i = 0; i < IGB_MAX_TX_QUEUES; i++) {
-		r_idx = i % adapter->num_tx_queues;
+	for (i = 0; i < IGB_ABS_MAX_TX_QUEUES; i++) {
+		int r_idx = i % adapter->num_tx_queues;
 		adapter->multi_tx_table[i] = &adapter->tx_ring[r_idx];
 	}
 	return err;
 }
 
 /**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tctl;
+
+	/* disable queue 0 which is enabled by default on 82575 and 82576 */
+	wr32(E1000_TXDCTL(0), 0);
+
+	/* Program the Transmit Control Register */
+	tctl = rd32(E1000_TCTL);
+	tctl &= ~E1000_TCTL_CT;
+	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+	igb_config_collision_dist(hw);
+
+	/* Enable transmits */
+	tctl |= E1000_TCTL_EN;
+
+	wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+                           struct igb_ring *ring)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 txdctl;
+	u64 tdba = ring->dma;
+	int reg_idx = ring->reg_idx;
+
+	/* disable the queue */
+	txdctl = rd32(E1000_TXDCTL(reg_idx));
+	wr32(E1000_TXDCTL(reg_idx),
+	                txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+	wrfl();
+	mdelay(10);
+
+	wr32(E1000_TDLEN(reg_idx),
+	                ring->count * sizeof(union e1000_adv_tx_desc));
+	wr32(E1000_TDBAL(reg_idx),
+	                tdba & 0x00000000ffffffffULL);
+	wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+	ring->head = hw->hw_addr + E1000_TDH(reg_idx);
+	ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+	writel(0, ring->head);
+	writel(0, ring->tail);
+
+	txdctl |= IGB_TX_PTHRESH;
+	txdctl |= IGB_TX_HTHRESH << 8;
+	txdctl |= IGB_TX_WTHRESH << 16;
+
+	txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+	wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
  * igb_configure_tx - Configure transmit Unit after Reset
  * @adapter: board private structure
  *
@@ -1919,71 +2221,21 @@
  **/
 static void igb_configure_tx(struct igb_adapter *adapter)
 {
-	u64 tdba;
-	struct e1000_hw *hw = &adapter->hw;
-	u32 tctl;
-	u32 txdctl, txctrl;
-	int i, j;
+	int i;
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *ring = &adapter->tx_ring[i];
-		j = ring->reg_idx;
-		wr32(E1000_TDLEN(j),
-		     ring->count * sizeof(union e1000_adv_tx_desc));
-		tdba = ring->dma;
-		wr32(E1000_TDBAL(j),
-		     tdba & 0x00000000ffffffffULL);
-		wr32(E1000_TDBAH(j), tdba >> 32);
-
-		ring->head = E1000_TDH(j);
-		ring->tail = E1000_TDT(j);
-		writel(0, hw->hw_addr + ring->tail);
-		writel(0, hw->hw_addr + ring->head);
-		txdctl = rd32(E1000_TXDCTL(j));
-		txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
-		wr32(E1000_TXDCTL(j), txdctl);
-
-		/* Turn off Relaxed Ordering on head write-backs.  The
-		 * writebacks MUST be delivered in order or it will
-		 * completely screw up our bookeeping.
-		 */
-		txctrl = rd32(E1000_DCA_TXCTRL(j));
-		txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
-		wr32(E1000_DCA_TXCTRL(j), txctrl);
-	}
-
-	/* disable queue 0 to prevent tail bump w/o re-configuration */
-	if (adapter->vfs_allocated_count)
-		wr32(E1000_TXDCTL(0), 0);
-
-	/* Program the Transmit Control Register */
-	tctl = rd32(E1000_TCTL);
-	tctl &= ~E1000_TCTL_CT;
-	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
-		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-
-	igb_config_collision_dist(hw);
-
-	/* Setup Transmit Descriptor Settings for eop descriptor */
-	adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS;
-
-	/* Enable transmits */
-	tctl |= E1000_TCTL_EN;
-
-	wr32(E1000_TCTL, tctl);
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		igb_configure_tx_ring(adapter, &adapter->tx_ring[i]);
 }
 
 /**
  * igb_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
  * @rx_ring:    rx descriptor ring (for a specific queue) to setup
  *
  * Returns 0 on success, negative on failure
  **/
-int igb_setup_rx_resources(struct igb_adapter *adapter,
-			   struct igb_ring *rx_ring)
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *pdev = rx_ring->pdev;
 	int size, desc_len;
 
 	size = sizeof(struct igb_buffer) * rx_ring->count;
@@ -2007,13 +2259,12 @@
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
 
-	rx_ring->adapter = adapter;
-
 	return 0;
 
 err:
 	vfree(rx_ring->buffer_info);
-	dev_err(&adapter->pdev->dev, "Unable to allocate memory for "
+	rx_ring->buffer_info = NULL;
+	dev_err(&pdev->dev, "Unable to allocate memory for "
 		"the receive descriptor ring\n");
 	return -ENOMEM;
 }
@@ -2027,12 +2278,13 @@
  **/
 static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	int i, err = 0;
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		err = igb_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+		err = igb_setup_rx_resources(&adapter->rx_ring[i]);
 		if (err) {
-			dev_err(&adapter->pdev->dev,
+			dev_err(&pdev->dev,
 				"Allocation for Rx Queue %u failed\n", i);
 			for (i--; i >= 0; i--)
 				igb_free_rx_resources(&adapter->rx_ring[i]);
@@ -2044,15 +2296,122 @@
 }
 
 /**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mrqc, rxcsum;
+	u32 j, num_rx_queues, shift = 0, shift2 = 0;
+	union e1000_reta {
+		u32 dword;
+		u8  bytes[4];
+	} reta;
+	static const u8 rsshash[40] = {
+		0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
+		0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
+		0xae, 0x7b, 0x30, 0xb4,	0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
+		0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
+
+	/* Fill out hash function seeds */
+	for (j = 0; j < 10; j++) {
+		u32 rsskey = rsshash[(j * 4)];
+		rsskey |= rsshash[(j * 4) + 1] << 8;
+		rsskey |= rsshash[(j * 4) + 2] << 16;
+		rsskey |= rsshash[(j * 4) + 3] << 24;
+		array_wr32(E1000_RSSRK(0), j, rsskey);
+	}
+
+	num_rx_queues = adapter->rss_queues;
+
+	if (adapter->vfs_allocated_count) {
+		/* 82575 and 82576 supports 2 RSS queues for VMDq */
+		switch (hw->mac.type) {
+		case e1000_82580:
+			num_rx_queues = 1;
+			shift = 0;
+			break;
+		case e1000_82576:
+			shift = 3;
+			num_rx_queues = 2;
+			break;
+		case e1000_82575:
+			shift = 2;
+			shift2 = 6;
+		default:
+			break;
+		}
+	} else {
+		if (hw->mac.type == e1000_82575)
+			shift = 6;
+	}
+
+	for (j = 0; j < (32 * 4); j++) {
+		reta.bytes[j & 3] = (j % num_rx_queues) << shift;
+		if (shift2)
+			reta.bytes[j & 3] |= num_rx_queues << shift2;
+		if ((j & 3) == 3)
+			wr32(E1000_RETA(j >> 2), reta.dword);
+	}
+
+	/*
+	 * Disable raw packet checksumming so that RSS hash is placed in
+	 * descriptor on writeback.  No need to enable TCP/UDP/IP checksum
+	 * offloads as they are enabled by default
+	 */
+	rxcsum = rd32(E1000_RXCSUM);
+	rxcsum |= E1000_RXCSUM_PCSD;
+
+	if (adapter->hw.mac.type >= e1000_82576)
+		/* Enable Receive Checksum Offload for SCTP */
+		rxcsum |= E1000_RXCSUM_CRCOFL;
+
+	/* Don't need to set TUOFL or IPOFL, they default to 1 */
+	wr32(E1000_RXCSUM, rxcsum);
+
+	/* If VMDq is enabled then we set the appropriate mode for that, else
+	 * we default to RSS so that an RSS hash is calculated per packet even
+	 * if we are only using one queue */
+	if (adapter->vfs_allocated_count) {
+		if (hw->mac.type > e1000_82575) {
+			/* Set the default pool for the PF's first queue */
+			u32 vtctl = rd32(E1000_VT_CTL);
+			vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+				   E1000_VT_CTL_DISABLE_DEF_POOL);
+			vtctl |= adapter->vfs_allocated_count <<
+				E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+			wr32(E1000_VT_CTL, vtctl);
+		}
+		if (adapter->rss_queues > 1)
+			mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+		else
+			mrqc = E1000_MRQC_ENABLE_VMDQ;
+	} else {
+		mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+	}
+	igb_vmm_control(adapter);
+
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
+		 E1000_MRQC_RSS_FIELD_IPV4_TCP);
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 |
+		 E1000_MRQC_RSS_FIELD_IPV6_TCP);
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV4_UDP |
+		 E1000_MRQC_RSS_FIELD_IPV6_UDP);
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
+		 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
+
+	wr32(E1000_MRQC, mrqc);
+}
+
+/**
  * igb_setup_rctl - configure the receive control registers
  * @adapter: Board private structure
  **/
-static void igb_setup_rctl(struct igb_adapter *adapter)
+void igb_setup_rctl(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
-	u32 srrctl = 0;
-	int i;
 
 	rctl = rd32(E1000_RCTL);
 
@@ -2069,77 +2428,47 @@
 	 */
 	rctl |= E1000_RCTL_SECRC;
 
-	/*
-	 * disable store bad packets and clear size bits.
-	 */
+	/* disable store bad packets and clear size bits. */
 	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
 
-	/* enable LPE when to prevent packets larger than max_frame_size */
-		rctl |= E1000_RCTL_LPE;
+	/* enable LPE to prevent packets larger than max_frame_size */
+	rctl |= E1000_RCTL_LPE;
 
-	/* Setup buffer sizes */
-	switch (adapter->rx_buffer_len) {
-	case IGB_RXBUFFER_256:
-		rctl |= E1000_RCTL_SZ_256;
-		break;
-	case IGB_RXBUFFER_512:
-		rctl |= E1000_RCTL_SZ_512;
-		break;
-	default:
-		srrctl = ALIGN(adapter->rx_buffer_len, 1024)
-		         >> E1000_SRRCTL_BSIZEPKT_SHIFT;
-		break;
-	}
-
-	/* 82575 and greater support packet-split where the protocol
-	 * header is placed in skb->data and the packet data is
-	 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
-	 * In the case of a non-split, skb->data is linearly filled,
-	 * followed by the page buffers.  Therefore, skb->data is
-	 * sized to hold the largest protocol header.
-	 */
-	/* allocations using alloc_page take too long for regular MTU
-	 * so only enable packet split for jumbo frames */
-	if (adapter->netdev->mtu > ETH_DATA_LEN) {
-		adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
-		srrctl |= adapter->rx_ps_hdr_size <<
-			 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
-		srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
-	} else {
-		adapter->rx_ps_hdr_size = 0;
-		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
-	}
+	/* disable queue 0 to prevent tail write w/o re-config */
+	wr32(E1000_RXDCTL(0), 0);
 
 	/* Attention!!!  For SR-IOV PF driver operations you must enable
 	 * queue drop for all VF and PF queues to prevent head of line blocking
 	 * if an un-trusted VF does not provide descriptors to hardware.
 	 */
 	if (adapter->vfs_allocated_count) {
-		u32 vmolr;
-
 		/* set all queue drop enable bits */
 		wr32(E1000_QDE, ALL_QUEUES);
-		srrctl |= E1000_SRRCTL_DROP_EN;
-
-		/* disable queue 0 to prevent tail write w/o re-config */
-		wr32(E1000_RXDCTL(0), 0);
-
-		vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
-		if (rctl & E1000_RCTL_LPE)
-			vmolr |= E1000_VMOLR_LPE;
-		if (adapter->num_rx_queues > 1)
-			vmolr |= E1000_VMOLR_RSSE;
-		wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
-	}
-
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		int j = adapter->rx_ring[i].reg_idx;
-		wr32(E1000_SRRCTL(j), srrctl);
 	}
 
 	wr32(E1000_RCTL, rctl);
 }
 
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                   int vfn)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	/* if it isn't the PF check to see if VFs are enabled and
+	 * increase the size to support vlan tags */
+	if (vfn < adapter->vfs_allocated_count &&
+	    adapter->vf_data[vfn].vlans_enabled)
+		size += VLAN_TAG_SIZE;
+
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr &= ~E1000_VMOLR_RLPML_MASK;
+	vmolr |= size | E1000_VMOLR_LPE;
+	wr32(E1000_VMOLR(vfn), vmolr);
+
+	return 0;
+}
+
 /**
  * igb_rlpml_set - set maximum receive packet size
  * @adapter: board private structure
@@ -2159,33 +2488,107 @@
 	 * size and set the VMOLR RLPML to the size we need */
 	if (pf_id) {
 		igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
-		max_frame_size = MAX_STD_JUMBO_FRAME_SIZE + VLAN_TAG_SIZE;
+		max_frame_size = MAX_JUMBO_FRAME_SIZE;
 	}
 
 	wr32(E1000_RLPML, max_frame_size);
 }
 
-/**
- * igb_configure_vt_default_pool - Configure VT default pool
- * @adapter: board private structure
- *
- * Configure the default pool
- **/
-static void igb_configure_vt_default_pool(struct igb_adapter *adapter)
+static inline void igb_set_vmolr(struct igb_adapter *adapter, int vfn)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u16 pf_id = adapter->vfs_allocated_count;
-	u32 vtctl;
+	u32 vmolr;
 
-	/* not in sr-iov mode - do nothing */
-	if (!pf_id)
+	/*
+	 * This register exists only on 82576 and newer so if we are older then
+	 * we should exit and do nothing
+	 */
+	if (hw->mac.type < e1000_82576)
 		return;
 
-	vtctl = rd32(E1000_VT_CTL);
-	vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
-		   E1000_VT_CTL_DISABLE_DEF_POOL);
-	vtctl |= pf_id << E1000_VT_CTL_DEFAULT_POOL_SHIFT;
-	wr32(E1000_VT_CTL, vtctl);
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr |= E1000_VMOLR_AUPE |        /* Accept untagged packets */
+	         E1000_VMOLR_STRVLAN;      /* Strip vlan tags */
+
+	/* clear all bits that might not be set */
+	vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+	if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
+		vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+	/*
+	 * for VMDq only allow the VFs and pool 0 to accept broadcast and
+	 * multicast packets
+	 */
+	if (vfn <= adapter->vfs_allocated_count)
+		vmolr |= E1000_VMOLR_BAM;	   /* Accept broadcast */
+
+	wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+                           struct igb_ring *ring)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u64 rdba = ring->dma;
+	int reg_idx = ring->reg_idx;
+	u32 srrctl, rxdctl;
+
+	/* disable the queue */
+	rxdctl = rd32(E1000_RXDCTL(reg_idx));
+	wr32(E1000_RXDCTL(reg_idx),
+	                rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+
+	/* Set DMA base address registers */
+	wr32(E1000_RDBAL(reg_idx),
+	     rdba & 0x00000000ffffffffULL);
+	wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+	wr32(E1000_RDLEN(reg_idx),
+	               ring->count * sizeof(union e1000_adv_rx_desc));
+
+	/* initialize head and tail */
+	ring->head = hw->hw_addr + E1000_RDH(reg_idx);
+	ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+	writel(0, ring->head);
+	writel(0, ring->tail);
+
+	/* set descriptor configuration */
+	if (ring->rx_buffer_len < IGB_RXBUFFER_1024) {
+		srrctl = ALIGN(ring->rx_buffer_len, 64) <<
+		         E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
+		srrctl |= IGB_RXBUFFER_16384 >>
+		          E1000_SRRCTL_BSIZEPKT_SHIFT;
+#else
+		srrctl |= (PAGE_SIZE / 2) >>
+		          E1000_SRRCTL_BSIZEPKT_SHIFT;
+#endif
+		srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+	} else {
+		srrctl = ALIGN(ring->rx_buffer_len, 1024) >>
+		         E1000_SRRCTL_BSIZEPKT_SHIFT;
+		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+	}
+
+	wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+	/* set filtering for VMDQ pools */
+	igb_set_vmolr(adapter, reg_idx & 0x7);
+
+	/* enable receive descriptor fetching */
+	rxdctl = rd32(E1000_RXDCTL(reg_idx));
+	rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+	rxdctl &= 0xFFF00000;
+	rxdctl |= IGB_RX_PTHRESH;
+	rxdctl |= IGB_RX_HTHRESH << 8;
+	rxdctl |= IGB_RX_WTHRESH << 16;
+	wr32(E1000_RXDCTL(reg_idx), rxdctl);
 }
 
 /**
@@ -2196,112 +2599,19 @@
  **/
 static void igb_configure_rx(struct igb_adapter *adapter)
 {
-	u64 rdba;
-	struct e1000_hw *hw = &adapter->hw;
-	u32 rctl, rxcsum;
-	u32 rxdctl;
 	int i;
 
-	/* disable receives while setting up the descriptors */
-	rctl = rd32(E1000_RCTL);
-	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
-	wrfl();
-	mdelay(10);
+	/* set UTA to appropriate mode */
+	igb_set_uta(adapter);
 
-	if (adapter->itr_setting > 3)
-		wr32(E1000_ITR, adapter->itr);
+	/* set the correct pool for the PF default MAC address in entry 0 */
+	igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+	                 adapter->vfs_allocated_count);
 
 	/* Setup the HW Rx Head and Tail Descriptor Pointers and
 	 * the Base and Length of the Rx Descriptor Ring */
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *ring = &adapter->rx_ring[i];
-		int j = ring->reg_idx;
-		rdba = ring->dma;
-		wr32(E1000_RDBAL(j),
-		     rdba & 0x00000000ffffffffULL);
-		wr32(E1000_RDBAH(j), rdba >> 32);
-		wr32(E1000_RDLEN(j),
-		     ring->count * sizeof(union e1000_adv_rx_desc));
-
-		ring->head = E1000_RDH(j);
-		ring->tail = E1000_RDT(j);
-		writel(0, hw->hw_addr + ring->tail);
-		writel(0, hw->hw_addr + ring->head);
-
-		rxdctl = rd32(E1000_RXDCTL(j));
-		rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
-		rxdctl &= 0xFFF00000;
-		rxdctl |= IGB_RX_PTHRESH;
-		rxdctl |= IGB_RX_HTHRESH << 8;
-		rxdctl |= IGB_RX_WTHRESH << 16;
-		wr32(E1000_RXDCTL(j), rxdctl);
-	}
-
-	if (adapter->num_rx_queues > 1) {
-		u32 random[10];
-		u32 mrqc;
-		u32 j, shift;
-		union e1000_reta {
-			u32 dword;
-			u8  bytes[4];
-		} reta;
-
-		get_random_bytes(&random[0], 40);
-
-		if (hw->mac.type >= e1000_82576)
-			shift = 0;
-		else
-			shift = 6;
-		for (j = 0; j < (32 * 4); j++) {
-			reta.bytes[j & 3] =
-				adapter->rx_ring[(j % adapter->num_rx_queues)].reg_idx << shift;
-			if ((j & 3) == 3)
-				writel(reta.dword,
-				       hw->hw_addr + E1000_RETA(0) + (j & ~3));
-		}
-		if (adapter->vfs_allocated_count)
-			mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
-		else
-			mrqc = E1000_MRQC_ENABLE_RSS_4Q;
-
-		/* Fill out hash function seeds */
-		for (j = 0; j < 10; j++)
-			array_wr32(E1000_RSSRK(0), j, random[j]);
-
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
-			 E1000_MRQC_RSS_FIELD_IPV4_TCP);
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 |
-			 E1000_MRQC_RSS_FIELD_IPV6_TCP);
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV4_UDP |
-			 E1000_MRQC_RSS_FIELD_IPV6_UDP);
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
-			 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
-
-		wr32(E1000_MRQC, mrqc);
-	} else if (adapter->vfs_allocated_count) {
-		/* Enable multi-queue for sr-iov */
-		wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
-	}
-
-	/* Enable Receive Checksum Offload for TCP and UDP */
-	rxcsum = rd32(E1000_RXCSUM);
-	/* Disable raw packet checksumming */
-	rxcsum |= E1000_RXCSUM_PCSD;
-
-	if (adapter->hw.mac.type == e1000_82576)
-		/* Enable Receive Checksum Offload for SCTP */
-		rxcsum |= E1000_RXCSUM_CRCOFL;
-
-	/* Don't need to set TUOFL or IPOFL, they default to 1 */
-	wr32(E1000_RXCSUM, rxcsum);
-
-	/* Set the default pool for the PF's first queue */
-	igb_configure_vt_default_pool(adapter);
-
-	igb_rlpml_set(adapter);
-
-	/* Enable Receives */
-	wr32(E1000_RCTL, rctl);
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		igb_configure_rx_ring(adapter, &adapter->rx_ring[i]);
 }
 
 /**
@@ -2312,14 +2622,17 @@
  **/
 void igb_free_tx_resources(struct igb_ring *tx_ring)
 {
-	struct pci_dev *pdev = tx_ring->adapter->pdev;
-
 	igb_clean_tx_ring(tx_ring);
 
 	vfree(tx_ring->buffer_info);
 	tx_ring->buffer_info = NULL;
 
-	pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+	/* if not set, then don't free */
+	if (!tx_ring->desc)
+		return;
+
+	pci_free_consistent(tx_ring->pdev, tx_ring->size,
+	                    tx_ring->desc, tx_ring->dma);
 
 	tx_ring->desc = NULL;
 }
@@ -2338,18 +2651,30 @@
 		igb_free_tx_resources(&adapter->tx_ring[i]);
 }
 
-static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter,
-					   struct igb_buffer *buffer_info)
+void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
+				    struct igb_buffer *buffer_info)
 {
-	buffer_info->dma = 0;
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			pci_unmap_page(tx_ring->pdev,
+					buffer_info->dma,
+					buffer_info->length,
+					PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(tx_ring->pdev,
+					buffer_info->dma,
+					buffer_info->length,
+					PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
+	}
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
 	buffer_info->time_stamp = 0;
-	/* buffer_info must be completely set up in the transmit path */
+	buffer_info->length = 0;
+	buffer_info->next_to_watch = 0;
+	buffer_info->mapped_as_page = false;
 }
 
 /**
@@ -2358,7 +2683,6 @@
  **/
 static void igb_clean_tx_ring(struct igb_ring *tx_ring)
 {
-	struct igb_adapter *adapter = tx_ring->adapter;
 	struct igb_buffer *buffer_info;
 	unsigned long size;
 	unsigned int i;
@@ -2369,21 +2693,17 @@
 
 	for (i = 0; i < tx_ring->count; i++) {
 		buffer_info = &tx_ring->buffer_info[i];
-		igb_unmap_and_free_tx_resource(adapter, buffer_info);
+		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
 	}
 
 	size = sizeof(struct igb_buffer) * tx_ring->count;
 	memset(tx_ring->buffer_info, 0, size);
 
 	/* Zero out the descriptor ring */
-
 	memset(tx_ring->desc, 0, tx_ring->size);
 
 	tx_ring->next_to_use = 0;
 	tx_ring->next_to_clean = 0;
-
-	writel(0, adapter->hw.hw_addr + tx_ring->head);
-	writel(0, adapter->hw.hw_addr + tx_ring->tail);
 }
 
 /**
@@ -2406,14 +2726,17 @@
  **/
 void igb_free_rx_resources(struct igb_ring *rx_ring)
 {
-	struct pci_dev *pdev = rx_ring->adapter->pdev;
-
 	igb_clean_rx_ring(rx_ring);
 
 	vfree(rx_ring->buffer_info);
 	rx_ring->buffer_info = NULL;
 
-	pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+	/* if not set, then don't free */
+	if (!rx_ring->desc)
+		return;
+
+	pci_free_consistent(rx_ring->pdev, rx_ring->size,
+	                    rx_ring->desc, rx_ring->dma);
 
 	rx_ring->desc = NULL;
 }
@@ -2438,26 +2761,21 @@
  **/
 static void igb_clean_rx_ring(struct igb_ring *rx_ring)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
 	struct igb_buffer *buffer_info;
-	struct pci_dev *pdev = adapter->pdev;
 	unsigned long size;
 	unsigned int i;
 
 	if (!rx_ring->buffer_info)
 		return;
+
 	/* Free all the Rx ring sk_buffs */
 	for (i = 0; i < rx_ring->count; i++) {
 		buffer_info = &rx_ring->buffer_info[i];
 		if (buffer_info->dma) {
-			if (adapter->rx_ps_hdr_size)
-				pci_unmap_single(pdev, buffer_info->dma,
-						 adapter->rx_ps_hdr_size,
-						 PCI_DMA_FROMDEVICE);
-			else
-				pci_unmap_single(pdev, buffer_info->dma,
-						 adapter->rx_buffer_len,
-						 PCI_DMA_FROMDEVICE);
+			pci_unmap_single(rx_ring->pdev,
+			                 buffer_info->dma,
+					 rx_ring->rx_buffer_len,
+					 PCI_DMA_FROMDEVICE);
 			buffer_info->dma = 0;
 		}
 
@@ -2465,14 +2783,16 @@
 			dev_kfree_skb(buffer_info->skb);
 			buffer_info->skb = NULL;
 		}
+		if (buffer_info->page_dma) {
+			pci_unmap_page(rx_ring->pdev,
+			               buffer_info->page_dma,
+				       PAGE_SIZE / 2,
+				       PCI_DMA_FROMDEVICE);
+			buffer_info->page_dma = 0;
+		}
 		if (buffer_info->page) {
-			if (buffer_info->page_dma)
-				pci_unmap_page(pdev, buffer_info->page_dma,
-					       PAGE_SIZE / 2,
-					       PCI_DMA_FROMDEVICE);
 			put_page(buffer_info->page);
 			buffer_info->page = NULL;
-			buffer_info->page_dma = 0;
 			buffer_info->page_offset = 0;
 		}
 	}
@@ -2485,9 +2805,6 @@
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
-
-	writel(0, adapter->hw.hw_addr + rx_ring->head);
-	writel(0, adapter->hw.hw_addr + rx_ring->tail);
 }
 
 /**
@@ -2521,13 +2838,103 @@
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
 
-	igb_rar_set(hw, hw->mac.addr, 0);
-	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
+	/* set the correct pool for the new PF MAC address in entry 0 */
+	igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+	                 adapter->vfs_allocated_count);
 
 	return 0;
 }
 
 /**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ *                0 on no addresses written
+ *                X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct dev_mc_list *mc_ptr = netdev->mc_list;
+	u8  *mta_list;
+	u32 vmolr = 0;
+	int i;
+
+	if (!netdev->mc_count) {
+		/* nothing to program, so clear mc list */
+		igb_update_mc_addr_list(hw, NULL, 0);
+		igb_restore_vf_multicasts(adapter);
+		return 0;
+	}
+
+	mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
+	if (!mta_list)
+		return -ENOMEM;
+
+	/* set vmolr receive overflow multicast bit */
+	vmolr |= E1000_VMOLR_ROMPE;
+
+	/* The shared function expects a packed array of only addresses. */
+	mc_ptr = netdev->mc_list;
+
+	for (i = 0; i < netdev->mc_count; i++) {
+		if (!mc_ptr)
+			break;
+		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
+		mc_ptr = mc_ptr->next;
+	}
+	igb_update_mc_addr_list(hw, mta_list, i);
+	kfree(mta_list);
+
+	return netdev->mc_count;
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ *                0 on no addresses written
+ *                X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned int vfn = adapter->vfs_allocated_count;
+	unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+	int count = 0;
+
+	/* return ENOMEM indicating insufficient memory for addresses */
+	if (netdev->uc.count > rar_entries)
+		return -ENOMEM;
+
+	if (netdev->uc.count && rar_entries) {
+		struct netdev_hw_addr *ha;
+		list_for_each_entry(ha, &netdev->uc.list, list) {
+			if (!rar_entries)
+				break;
+			igb_rar_set_qsel(adapter, ha->addr,
+			                 rar_entries--,
+			                 vfn);
+			count++;
+		}
+	}
+	/* write the addresses in reverse order to avoid write combining */
+	for (; rar_entries > 0 ; rar_entries--) {
+		wr32(E1000_RAH(rar_entries), 0);
+		wr32(E1000_RAL(rar_entries), 0);
+	}
+	wrfl();
+
+	return count;
+}
+
+/**
  * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
  * @netdev: network interface device structure
  *
@@ -2540,74 +2947,63 @@
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	unsigned int rar_entries = hw->mac.rar_entry_count -
-	                           (adapter->vfs_allocated_count + 1);
-	struct dev_mc_list *mc_ptr = netdev->mc_list;
-	u8  *mta_list = NULL;
-	u32 rctl;
-	int i;
+	unsigned int vfn = adapter->vfs_allocated_count;
+	u32 rctl, vmolr = 0;
+	int count;
 
 	/* Check for Promiscuous and All Multicast modes */
 	rctl = rd32(E1000_RCTL);
 
+	/* clear the effected bits */
+	rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-		rctl &= ~E1000_RCTL_VFE;
+		vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
 	} else {
-		if (netdev->flags & IFF_ALLMULTI)
+		if (netdev->flags & IFF_ALLMULTI) {
 			rctl |= E1000_RCTL_MPE;
-		else
-			rctl &= ~E1000_RCTL_MPE;
-
-		if (netdev->uc.count > rar_entries)
+			vmolr |= E1000_VMOLR_MPME;
+		} else {
+			/*
+			 * Write addresses to the MTA, if the attempt fails
+			 * then we should just turn on promiscous mode so
+			 * that we can at least receive multicast traffic
+			 */
+			count = igb_write_mc_addr_list(netdev);
+			if (count < 0) {
+				rctl |= E1000_RCTL_MPE;
+				vmolr |= E1000_VMOLR_MPME;
+			} else if (count) {
+				vmolr |= E1000_VMOLR_ROMPE;
+			}
+		}
+		/*
+		 * Write addresses to available RAR registers, if there is not
+		 * sufficient space to store all the addresses then enable
+		 * unicast promiscous mode
+		 */
+		count = igb_write_uc_addr_list(netdev);
+		if (count < 0) {
 			rctl |= E1000_RCTL_UPE;
-		else
-			rctl &= ~E1000_RCTL_UPE;
+			vmolr |= E1000_VMOLR_ROPE;
+		}
 		rctl |= E1000_RCTL_VFE;
 	}
 	wr32(E1000_RCTL, rctl);
 
-	if (netdev->uc.count && rar_entries) {
-		struct netdev_hw_addr *ha;
-		list_for_each_entry(ha, &netdev->uc.list, list) {
-			if (!rar_entries)
-				break;
-			igb_rar_set(hw, ha->addr, rar_entries);
-			igb_set_rah_pool(hw, adapter->vfs_allocated_count,
-			                 rar_entries);
-			rar_entries--;
-		}
-	}
-	/* write the addresses in reverse order to avoid write combining */
-	for (; rar_entries > 0 ; rar_entries--) {
-		wr32(E1000_RAH(rar_entries), 0);
-		wr32(E1000_RAL(rar_entries), 0);
-	}
-	wrfl();
-
-	if (!netdev->mc_count) {
-		/* nothing to program, so clear mc list */
-		igb_update_mc_addr_list(hw, NULL, 0);
-		igb_restore_vf_multicasts(adapter);
+	/*
+	 * In order to support SR-IOV and eventually VMDq it is necessary to set
+	 * the VMOLR to enable the appropriate modes.  Without this workaround
+	 * we will have issues with VLAN tag stripping not being done for frames
+	 * that are only arriving because we are the default pool
+	 */
+	if (hw->mac.type < e1000_82576)
 		return;
-	}
 
-	mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
-	if (!mta_list) {
-		dev_err(&adapter->pdev->dev,
-		        "failed to allocate multicast filter list\n");
-		return;
-	}
-
-	/* The shared function expects a packed array of only addresses. */
-	for (i = 0; i < netdev->mc_count; i++) {
-		if (!mc_ptr)
-			break;
-		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
-		mc_ptr = mc_ptr->next;
-	}
-	igb_update_mc_addr_list(hw, mta_list, i);
-	kfree(mta_list);
+	vmolr |= rd32(E1000_VMOLR(vfn)) &
+	         ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+	wr32(E1000_VMOLR(vfn), vmolr);
 	igb_restore_vf_multicasts(adapter);
 }
 
@@ -2669,37 +3065,33 @@
 static void igb_watchdog_task(struct work_struct *work)
 {
 	struct igb_adapter *adapter = container_of(work,
-					struct igb_adapter, watchdog_task);
+	                                           struct igb_adapter,
+                                                   watchdog_task);
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
-	struct igb_ring *tx_ring = adapter->tx_ring;
 	u32 link;
-	u32 eics = 0;
 	int i;
 
 	link = igb_has_link(adapter);
-	if ((netif_carrier_ok(netdev)) && link)
-		goto link_up;
-
 	if (link) {
 		if (!netif_carrier_ok(netdev)) {
 			u32 ctrl;
-			hw->mac.ops.get_speed_and_duplex(&adapter->hw,
-						   &adapter->link_speed,
-						   &adapter->link_duplex);
+			hw->mac.ops.get_speed_and_duplex(hw,
+			                                 &adapter->link_speed,
+			                                 &adapter->link_duplex);
 
 			ctrl = rd32(E1000_CTRL);
 			/* Links status message must follow this format */
 			printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
 				 "Flow Control: %s\n",
-			         netdev->name,
-				 adapter->link_speed,
-				 adapter->link_duplex == FULL_DUPLEX ?
+			       netdev->name,
+			       adapter->link_speed,
+			       adapter->link_duplex == FULL_DUPLEX ?
 				 "Full Duplex" : "Half Duplex",
-				 ((ctrl & E1000_CTRL_TFCE) && (ctrl &
-				 E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
-				 E1000_CTRL_RFCE) ? "RX" : ((ctrl &
-				 E1000_CTRL_TFCE) ? "TX" : "None")));
+			       ((ctrl & E1000_CTRL_TFCE) &&
+			        (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
+			       ((ctrl & E1000_CTRL_RFCE) ?  "RX" :
+			       ((ctrl & E1000_CTRL_TFCE) ?  "TX" : "None")));
 
 			/* tweak tx_queue_len according to speed/duplex and
 			 * adjust the timeout factor */
@@ -2743,46 +3135,40 @@
 		}
 	}
 
-link_up:
 	igb_update_stats(adapter);
+	igb_update_adaptive(hw);
 
-	hw->mac.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
-	adapter->tpt_old = adapter->stats.tpt;
-	hw->mac.collision_delta = adapter->stats.colc - adapter->colc_old;
-	adapter->colc_old = adapter->stats.colc;
-
-	adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
-	adapter->gorc_old = adapter->stats.gorc;
-	adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
-	adapter->gotc_old = adapter->stats.gotc;
-
-	igb_update_adaptive(&adapter->hw);
-
-	if (!netif_carrier_ok(netdev)) {
-		if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct igb_ring *tx_ring = &adapter->tx_ring[i];
+		if (!netif_carrier_ok(netdev)) {
 			/* We've lost link, so the controller stops DMA,
 			 * but we've got queued Tx work that's never going
 			 * to get done, so reset controller to flush Tx.
 			 * (Do the reset outside of interrupt context). */
-			adapter->tx_timeout_count++;
-			schedule_work(&adapter->reset_task);
-			/* return immediately since reset is imminent */
-			return;
+			if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+				adapter->tx_timeout_count++;
+				schedule_work(&adapter->reset_task);
+				/* return immediately since reset is imminent */
+				return;
+			}
 		}
+
+		/* Force detection of hung controller every watchdog period */
+		tx_ring->detect_tx_hung = true;
 	}
 
 	/* Cause software interrupt to ensure rx ring is cleaned */
 	if (adapter->msix_entries) {
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			eics |= adapter->rx_ring[i].eims_value;
+		u32 eics = 0;
+		for (i = 0; i < adapter->num_q_vectors; i++) {
+			struct igb_q_vector *q_vector = adapter->q_vector[i];
+			eics |= q_vector->eims_value;
+		}
 		wr32(E1000_EICS, eics);
 	} else {
 		wr32(E1000_ICS, E1000_ICS_RXDMT0);
 	}
 
-	/* Force detection of hung controller every watchdog period */
-	tx_ring->detect_tx_hung = true;
-
 	/* Reset the timer */
 	if (!test_bit(__IGB_DOWN, &adapter->state))
 		mod_timer(&adapter->watchdog_timer,
@@ -2796,7 +3182,6 @@
 	latency_invalid = 255
 };
 
-
 /**
  * igb_update_ring_itr - update the dynamic ITR value based on packet size
  *
@@ -2811,25 +3196,37 @@
  *      parameter (see igb_param.c)
  *      NOTE:  This function is called only when operating in a multiqueue
  *             receive environment.
- * @rx_ring: pointer to ring
+ * @q_vector: pointer to q_vector
  **/
-static void igb_update_ring_itr(struct igb_ring *rx_ring)
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
 {
-	int new_val = rx_ring->itr_val;
+	int new_val = q_vector->itr_val;
 	int avg_wire_size = 0;
-	struct igb_adapter *adapter = rx_ring->adapter;
-
-	if (!rx_ring->total_packets)
-		goto clear_counts; /* no packets, so don't do anything */
+	struct igb_adapter *adapter = q_vector->adapter;
 
 	/* For non-gigabit speeds, just fix the interrupt rate at 4000
 	 * ints/sec - ITR timer value of 120 ticks.
 	 */
 	if (adapter->link_speed != SPEED_1000) {
-		new_val = 120;
+		new_val = 976;
 		goto set_itr_val;
 	}
-	avg_wire_size = rx_ring->total_bytes / rx_ring->total_packets;
+
+	if (q_vector->rx_ring && q_vector->rx_ring->total_packets) {
+		struct igb_ring *ring = q_vector->rx_ring;
+		avg_wire_size = ring->total_bytes / ring->total_packets;
+	}
+
+	if (q_vector->tx_ring && q_vector->tx_ring->total_packets) {
+		struct igb_ring *ring = q_vector->tx_ring;
+		avg_wire_size = max_t(u32, avg_wire_size,
+		                      (ring->total_bytes /
+		                       ring->total_packets));
+	}
+
+	/* if avg_wire_size isn't set no work was done */
+	if (!avg_wire_size)
+		goto clear_counts;
 
 	/* Add 24 bytes to size to account for CRC, preamble, and gap */
 	avg_wire_size += 24;
@@ -2844,13 +3241,19 @@
 		new_val = avg_wire_size / 2;
 
 set_itr_val:
-	if (new_val != rx_ring->itr_val) {
-		rx_ring->itr_val = new_val;
-		rx_ring->set_itr = 1;
+	if (new_val != q_vector->itr_val) {
+		q_vector->itr_val = new_val;
+		q_vector->set_itr = 1;
 	}
 clear_counts:
-	rx_ring->total_bytes = 0;
-	rx_ring->total_packets = 0;
+	if (q_vector->rx_ring) {
+		q_vector->rx_ring->total_bytes = 0;
+		q_vector->rx_ring->total_packets = 0;
+	}
+	if (q_vector->tx_ring) {
+		q_vector->tx_ring->total_bytes = 0;
+		q_vector->tx_ring->total_packets = 0;
+	}
 }
 
 /**
@@ -2867,7 +3270,7 @@
  *      NOTE:  These calculations are only valid when operating in a single-
  *             queue environment.
  * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
+ * @itr_setting: current q_vector->itr_val
  * @packets: the number of packets during this measurement interval
  * @bytes: the number of bytes during this measurement interval
  **/
@@ -2919,8 +3322,9 @@
 
 static void igb_set_itr(struct igb_adapter *adapter)
 {
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
 	u16 current_itr;
-	u32 new_itr = adapter->itr;
+	u32 new_itr = q_vector->itr_val;
 
 	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
 	if (adapter->link_speed != SPEED_1000) {
@@ -2934,18 +3338,14 @@
 				    adapter->rx_ring->total_packets,
 				    adapter->rx_ring->total_bytes);
 
-	if (adapter->rx_ring->buddy) {
-		adapter->tx_itr = igb_update_itr(adapter,
-					    adapter->tx_itr,
-					    adapter->tx_ring->total_packets,
-					    adapter->tx_ring->total_bytes);
-		current_itr = max(adapter->rx_itr, adapter->tx_itr);
-	} else {
-		current_itr = adapter->rx_itr;
-	}
+	adapter->tx_itr = igb_update_itr(adapter,
+				    adapter->tx_itr,
+				    adapter->tx_ring->total_packets,
+				    adapter->tx_ring->total_bytes);
+	current_itr = max(adapter->rx_itr, adapter->tx_itr);
 
 	/* conservative mode (itr 3) eliminates the lowest_latency setting */
-	if (adapter->itr_setting == 3 && current_itr == lowest_latency)
+	if (adapter->rx_itr_setting == 3 && current_itr == lowest_latency)
 		current_itr = low_latency;
 
 	switch (current_itr) {
@@ -2966,18 +3366,17 @@
 set_itr_now:
 	adapter->rx_ring->total_bytes = 0;
 	adapter->rx_ring->total_packets = 0;
-	if (adapter->rx_ring->buddy) {
-		adapter->rx_ring->buddy->total_bytes = 0;
-		adapter->rx_ring->buddy->total_packets = 0;
-	}
+	adapter->tx_ring->total_bytes = 0;
+	adapter->tx_ring->total_packets = 0;
 
-	if (new_itr != adapter->itr) {
+	if (new_itr != q_vector->itr_val) {
 		/* this attempts to bias the interrupt rate towards Bulk
 		 * by adding intermediate steps when interrupt rate is
 		 * increasing */
-		new_itr = new_itr > adapter->itr ?
-			     max((new_itr * adapter->itr) /
-			         (new_itr + (adapter->itr >> 2)), new_itr) :
+		new_itr = new_itr > q_vector->itr_val ?
+		             max((new_itr * q_vector->itr_val) /
+		                 (new_itr + (q_vector->itr_val >> 2)),
+		                 new_itr) :
 			     new_itr;
 		/* Don't write the value here; it resets the adapter's
 		 * internal timer, and causes us to delay far longer than
@@ -2985,25 +3384,22 @@
 		 * value at the beginning of the next interrupt so the timing
 		 * ends up being correct.
 		 */
-		adapter->itr = new_itr;
-		adapter->rx_ring->itr_val = new_itr;
-		adapter->rx_ring->set_itr = 1;
+		q_vector->itr_val = new_itr;
+		q_vector->set_itr = 1;
 	}
 
 	return;
 }
 
-
 #define IGB_TX_FLAGS_CSUM		0x00000001
 #define IGB_TX_FLAGS_VLAN		0x00000002
 #define IGB_TX_FLAGS_TSO		0x00000004
 #define IGB_TX_FLAGS_IPV4		0x00000008
-#define IGB_TX_FLAGS_TSTAMP             0x00000010
-#define IGB_TX_FLAGS_VLAN_MASK	0xffff0000
-#define IGB_TX_FLAGS_VLAN_SHIFT	16
+#define IGB_TX_FLAGS_TSTAMP		0x00000010
+#define IGB_TX_FLAGS_VLAN_MASK		0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT		        16
 
-static inline int igb_tso_adv(struct igb_adapter *adapter,
-			      struct igb_ring *tx_ring,
+static inline int igb_tso_adv(struct igb_ring *tx_ring,
 			      struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
 {
 	struct e1000_adv_tx_context_desc *context_desc;
@@ -3065,8 +3461,8 @@
 	mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
 
 	/* For 82575, context index must be unique per ring. */
-	if (adapter->flags & IGB_FLAG_NEED_CTX_IDX)
-		mss_l4len_idx |= tx_ring->queue_index << 4;
+	if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
+		mss_l4len_idx |= tx_ring->reg_idx << 4;
 
 	context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
 	context_desc->seqnum_seed = 0;
@@ -3083,14 +3479,14 @@
 	return true;
 }
 
-static inline bool igb_tx_csum_adv(struct igb_adapter *adapter,
-					struct igb_ring *tx_ring,
-					struct sk_buff *skb, u32 tx_flags)
+static inline bool igb_tx_csum_adv(struct igb_ring *tx_ring,
+				   struct sk_buff *skb, u32 tx_flags)
 {
 	struct e1000_adv_tx_context_desc *context_desc;
-	unsigned int i;
+	struct pci_dev *pdev = tx_ring->pdev;
 	struct igb_buffer *buffer_info;
 	u32 info = 0, tu_cmd = 0;
+	unsigned int i;
 
 	if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
 	    (tx_flags & IGB_TX_FLAGS_VLAN)) {
@@ -3100,6 +3496,7 @@
 
 		if (tx_flags & IGB_TX_FLAGS_VLAN)
 			info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+
 		info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
 		if (skb->ip_summed == CHECKSUM_PARTIAL)
 			info |= skb_network_header_len(skb);
@@ -3137,7 +3534,7 @@
 				break;
 			default:
 				if (unlikely(net_ratelimit()))
-					dev_warn(&adapter->pdev->dev,
+					dev_warn(&pdev->dev,
 					    "partial checksum but proto=%x!\n",
 					    skb->protocol);
 				break;
@@ -3146,11 +3543,9 @@
 
 		context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
 		context_desc->seqnum_seed = 0;
-		if (adapter->flags & IGB_FLAG_NEED_CTX_IDX)
+		if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
 			context_desc->mss_l4len_idx =
-				cpu_to_le32(tx_ring->queue_index << 4);
-		else
-			context_desc->mss_l4len_idx = 0;
+				cpu_to_le32(tx_ring->reg_idx << 4);
 
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
@@ -3169,32 +3564,27 @@
 #define IGB_MAX_TXD_PWR	16
 #define IGB_MAX_DATA_PER_TXD	(1<<IGB_MAX_TXD_PWR)
 
-static inline int igb_tx_map_adv(struct igb_adapter *adapter,
-				 struct igb_ring *tx_ring, struct sk_buff *skb,
+static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
 				 unsigned int first)
 {
 	struct igb_buffer *buffer_info;
+	struct pci_dev *pdev = tx_ring->pdev;
 	unsigned int len = skb_headlen(skb);
 	unsigned int count = 0, i;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-
 	buffer_info = &tx_ring->buffer_info[i];
 	BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
 	buffer_info->length = len;
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
-	buffer_info->dma = skb_shinfo(skb)->dma_head;
+	buffer_info->dma = pci_map_single(pdev, skb->data, len,
+					  PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(pdev, buffer_info->dma))
+		goto dma_error;
 
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
@@ -3211,25 +3601,55 @@
 		buffer_info->length = len;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
-		buffer_info->dma = map[count];
+		buffer_info->mapped_as_page = true;
+		buffer_info->dma = pci_map_page(pdev,
+						frag->page,
+						frag->page_offset,
+						len,
+						PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma))
+			goto dma_error;
+
 		count++;
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count + 1;
+	return ++count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+
+	/* clear timestamp and dma mappings for failed buffer_info mapping */
+	buffer_info->dma = 0;
+	buffer_info->time_stamp = 0;
+	buffer_info->length = 0;
+	buffer_info->next_to_watch = 0;
+	buffer_info->mapped_as_page = false;
+	count--;
+
+	/* clear timestamp and dma mappings for remaining portion of packet */
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		buffer_info = &tx_ring->buffer_info[i];
+		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+	}
+
+	return 0;
 }
 
-static inline void igb_tx_queue_adv(struct igb_adapter *adapter,
-				    struct igb_ring *tx_ring,
+static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
 				    int tx_flags, int count, u32 paylen,
 				    u8 hdr_len)
 {
-	union e1000_adv_tx_desc *tx_desc = NULL;
+	union e1000_adv_tx_desc *tx_desc;
 	struct igb_buffer *buffer_info;
 	u32 olinfo_status = 0, cmd_type_len;
-	unsigned int i;
+	unsigned int i = tx_ring->next_to_use;
 
 	cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
 			E1000_ADVTXD_DCMD_DEXT);
@@ -3254,27 +3674,28 @@
 		olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
 	}
 
-	if ((adapter->flags & IGB_FLAG_NEED_CTX_IDX) &&
-	    (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO |
+	if ((tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX) &&
+	    (tx_flags & (IGB_TX_FLAGS_CSUM |
+	                 IGB_TX_FLAGS_TSO |
 			 IGB_TX_FLAGS_VLAN)))
-		olinfo_status |= tx_ring->queue_index << 4;
+		olinfo_status |= tx_ring->reg_idx << 4;
 
 	olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
 
-	i = tx_ring->next_to_use;
-	while (count--) {
+	do {
 		buffer_info = &tx_ring->buffer_info[i];
 		tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
 		tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 		tx_desc->read.cmd_type_len =
 			cpu_to_le32(cmd_type_len | buffer_info->length);
 		tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+		count--;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
-	}
+	} while (count > 0);
 
-	tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
+	tx_desc->read.cmd_type_len |= cpu_to_le32(IGB_ADVTXD_DCMD);
 	/* Force memory writes to complete before letting h/w
 	 * know there are new descriptors to fetch.  (Only
 	 * applicable for weak-ordered memory model archs,
@@ -3282,16 +3703,15 @@
 	wmb();
 
 	tx_ring->next_to_use = i;
-	writel(i, adapter->hw.hw_addr + tx_ring->tail);
+	writel(i, tx_ring->tail);
 	/* we need this if more than one processor can write to our tail
 	 * at a time, it syncronizes IO on IA64/Altix systems */
 	mmiowb();
 }
 
-static int __igb_maybe_stop_tx(struct net_device *netdev,
-			       struct igb_ring *tx_ring, int size)
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
 {
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct net_device *netdev = tx_ring->netdev;
 
 	netif_stop_subqueue(netdev, tx_ring->queue_index);
 
@@ -3307,29 +3727,92 @@
 
 	/* A reprieve! */
 	netif_wake_subqueue(netdev, tx_ring->queue_index);
-	++adapter->restart_queue;
+	tx_ring->tx_stats.restart_queue++;
 	return 0;
 }
 
-static int igb_maybe_stop_tx(struct net_device *netdev,
-			     struct igb_ring *tx_ring, int size)
+static int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
 {
 	if (igb_desc_unused(tx_ring) >= size)
 		return 0;
-	return __igb_maybe_stop_tx(netdev, tx_ring, size);
+	return __igb_maybe_stop_tx(tx_ring, size);
 }
 
-static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
-					   struct net_device *netdev,
-					   struct igb_ring *tx_ring)
+netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
+				    struct igb_ring *tx_ring)
 {
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
 	unsigned int first;
 	unsigned int tx_flags = 0;
 	u8 hdr_len = 0;
-	int count = 0;
-	int tso = 0;
-	union skb_shared_tx *shtx;
+	int tso = 0, count;
+	union skb_shared_tx *shtx = skb_tx(skb);
+
+	/* need: 1 descriptor per page,
+	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 1 desc for skb->data,
+	 *       + 1 desc for context descriptor,
+	 * otherwise try next time */
+	if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
+		/* this is a hard error */
+		return NETDEV_TX_BUSY;
+	}
+
+	if (unlikely(shtx->hardware)) {
+		shtx->in_progress = 1;
+		tx_flags |= IGB_TX_FLAGS_TSTAMP;
+	}
+
+	if (vlan_tx_tag_present(skb) && adapter->vlgrp) {
+		tx_flags |= IGB_TX_FLAGS_VLAN;
+		tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+	}
+
+	if (skb->protocol == htons(ETH_P_IP))
+		tx_flags |= IGB_TX_FLAGS_IPV4;
+
+	first = tx_ring->next_to_use;
+	if (skb_is_gso(skb)) {
+		tso = igb_tso_adv(tx_ring, skb, tx_flags, &hdr_len);
+
+		if (tso < 0) {
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
+	}
+
+	if (tso)
+		tx_flags |= IGB_TX_FLAGS_TSO;
+	else if (igb_tx_csum_adv(tx_ring, skb, tx_flags) &&
+	         (skb->ip_summed == CHECKSUM_PARTIAL))
+		tx_flags |= IGB_TX_FLAGS_CSUM;
+
+	/*
+	 * count reflects descriptors mapped, if 0 or less then mapping error
+	 * has occured and we need to rewind the descriptor queue
+	 */
+	count = igb_tx_map_adv(tx_ring, skb, first);
+	if (!count) {
+		dev_kfree_skb_any(skb);
+		tx_ring->buffer_info[first].time_stamp = 0;
+		tx_ring->next_to_use = first;
+		return NETDEV_TX_OK;
+	}
+
+	igb_tx_queue_adv(tx_ring, tx_flags, count, skb->len, hdr_len);
+
+	/* Make sure there is space in the ring for the next send. */
+	igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4);
+
+	return NETDEV_TX_OK;
+}
+
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
+				      struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_ring *tx_ring;
+	int r_idx = 0;
 
 	if (test_bit(__IGB_DOWN, &adapter->state)) {
 		dev_kfree_skb_any(skb);
@@ -3341,81 +3824,6 @@
 		return NETDEV_TX_OK;
 	}
 
-	/* need: 1 descriptor per page,
-	 *       + 2 desc gap to keep tail from touching head,
-	 *       + 1 desc for skb->data,
-	 *       + 1 desc for context descriptor,
-	 * otherwise try next time */
-	if (igb_maybe_stop_tx(netdev, tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
-		/* this is a hard error */
-		return NETDEV_TX_BUSY;
-	}
-
-	/*
-	 * TODO: check that there currently is no other packet with
-	 * time stamping in the queue
-	 *
-	 * When doing time stamping, keep the connection to the socket
-	 * a while longer: it is still needed by skb_hwtstamp_tx(),
-	 * called either in igb_tx_hwtstamp() or by our caller when
-	 * doing software time stamping.
-	 */
-	shtx = skb_tx(skb);
-	if (unlikely(shtx->hardware)) {
-		shtx->in_progress = 1;
-		tx_flags |= IGB_TX_FLAGS_TSTAMP;
-	}
-
-	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
-		tx_flags |= IGB_TX_FLAGS_VLAN;
-		tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
-	}
-
-	if (skb->protocol == htons(ETH_P_IP))
-		tx_flags |= IGB_TX_FLAGS_IPV4;
-
-	first = tx_ring->next_to_use;
-	tso = skb_is_gso(skb) ? igb_tso_adv(adapter, tx_ring, skb, tx_flags,
-					      &hdr_len) : 0;
-
-	if (tso < 0) {
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-	if (tso)
-		tx_flags |= IGB_TX_FLAGS_TSO;
-	else if (igb_tx_csum_adv(adapter, tx_ring, skb, tx_flags) &&
-	         (skb->ip_summed == CHECKSUM_PARTIAL))
-		tx_flags |= IGB_TX_FLAGS_CSUM;
-
-	/*
-	 * count reflects descriptors mapped, if 0 then mapping error
-	 * has occured and we need to rewind the descriptor queue
-	 */
-	count = igb_tx_map_adv(adapter, tx_ring, skb, first);
-
-	if (count) {
-		igb_tx_queue_adv(adapter, tx_ring, tx_flags, count,
-			         skb->len, hdr_len);
-		/* Make sure there is space in the ring for the next send. */
-		igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4);
-	} else {
-		dev_kfree_skb_any(skb);
-		tx_ring->buffer_info[first].time_stamp = 0;
-		tx_ring->next_to_use = first;
-	}
-
-	return NETDEV_TX_OK;
-}
-
-static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
-				      struct net_device *netdev)
-{
-	struct igb_adapter *adapter = netdev_priv(netdev);
-	struct igb_ring *tx_ring;
-
-	int r_idx = 0;
 	r_idx = skb->queue_mapping & (IGB_ABS_MAX_TX_QUEUES - 1);
 	tx_ring = adapter->multi_tx_table[r_idx];
 
@@ -3423,7 +3831,7 @@
 	 * to a flow.  Right now, performance is impacted slightly negatively
 	 * if using multiple tx queues.  If the stack breaks away from a
 	 * single qdisc implementation, we can look at this again. */
-	return igb_xmit_frame_ring_adv(skb, netdev, tx_ring);
+	return igb_xmit_frame_ring_adv(skb, tx_ring);
 }
 
 /**
@@ -3437,6 +3845,10 @@
 
 	/* Do the reset outside of interrupt context */
 	adapter->tx_timeout_count++;
+
+	if (hw->mac.type == e1000_82580)
+		hw->dev_spec._82575.global_device_reset = true;
+
 	schedule_work(&adapter->reset_task);
 	wr32(E1000_EICS,
 	     (adapter->eims_enable_mask & ~adapter->eims_other));
@@ -3459,10 +3871,8 @@
  **/
 static struct net_device_stats *igb_get_stats(struct net_device *netdev)
 {
-	struct igb_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -3475,16 +3885,17 @@
 static int igb_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+	u32 rx_buffer_len, i;
 
-	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
-	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+	if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+		dev_err(&pdev->dev, "Invalid MTU setting\n");
 		return -EINVAL;
 	}
 
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+		dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
 		return -EINVAL;
 	}
 
@@ -3493,8 +3904,6 @@
 
 	/* igb_down has a dependency on max_frame_size */
 	adapter->max_frame_size = max_frame;
-	if (netif_running(netdev))
-		igb_down(adapter);
 
 	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 	 * means we reserve 2 more, this pushes us to allocate from the next
@@ -3502,35 +3911,23 @@
 	 * i.e. RXBUFFER_2048 --> size-4096 slab
 	 */
 
-	if (max_frame <= IGB_RXBUFFER_256)
-		adapter->rx_buffer_len = IGB_RXBUFFER_256;
-	else if (max_frame <= IGB_RXBUFFER_512)
-		adapter->rx_buffer_len = IGB_RXBUFFER_512;
-	else if (max_frame <= IGB_RXBUFFER_1024)
-		adapter->rx_buffer_len = IGB_RXBUFFER_1024;
-	else if (max_frame <= IGB_RXBUFFER_2048)
-		adapter->rx_buffer_len = IGB_RXBUFFER_2048;
+	if (max_frame <= IGB_RXBUFFER_1024)
+		rx_buffer_len = IGB_RXBUFFER_1024;
+	else if (max_frame <= MAXIMUM_ETHERNET_VLAN_SIZE)
+		rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 	else
-#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
-		adapter->rx_buffer_len = IGB_RXBUFFER_16384;
-#else
-		adapter->rx_buffer_len = PAGE_SIZE / 2;
-#endif
+		rx_buffer_len = IGB_RXBUFFER_128;
 
-	/* if sr-iov is enabled we need to force buffer size to 1K or larger */
-	if (adapter->vfs_allocated_count &&
-	    (adapter->rx_buffer_len < IGB_RXBUFFER_1024))
-		adapter->rx_buffer_len = IGB_RXBUFFER_1024;
+	if (netif_running(netdev))
+		igb_down(adapter);
 
-	/* adjust allocation if LPE protects us, and we aren't using SBP */
-	if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
-	     (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))
-		adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
-
-	dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+	dev_info(&pdev->dev, "changing MTU from %d to %d\n",
 		 netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		adapter->rx_ring[i].rx_buffer_len = rx_buffer_len;
+
 	if (netif_running(netdev))
 		igb_up(adapter);
 	else
@@ -3548,9 +3945,13 @@
 
 void igb_update_stats(struct igb_adapter *adapter)
 {
+	struct net_device_stats *net_stats = igb_get_stats(adapter->netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
+	u32 rnbc;
 	u16 phy_tmp;
+	int i;
+	u64 bytes, packets;
 
 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
 
@@ -3563,6 +3964,29 @@
 	if (pci_channel_offline(pdev))
 		return;
 
+	bytes = 0;
+	packets = 0;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
+		adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
+		net_stats->rx_fifo_errors += rqdpc_tmp;
+		bytes += adapter->rx_ring[i].rx_stats.bytes;
+		packets += adapter->rx_ring[i].rx_stats.packets;
+	}
+
+	net_stats->rx_bytes = bytes;
+	net_stats->rx_packets = packets;
+
+	bytes = 0;
+	packets = 0;
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		bytes += adapter->tx_ring[i].tx_stats.bytes;
+		packets += adapter->tx_ring[i].tx_stats.packets;
+	}
+	net_stats->tx_bytes = bytes;
+	net_stats->tx_packets = packets;
+
+	/* read stats registers */
 	adapter->stats.crcerrs += rd32(E1000_CRCERRS);
 	adapter->stats.gprc += rd32(E1000_GPRC);
 	adapter->stats.gorc += rd32(E1000_GORCL);
@@ -3595,7 +4019,9 @@
 	adapter->stats.gptc += rd32(E1000_GPTC);
 	adapter->stats.gotc += rd32(E1000_GOTCL);
 	rd32(E1000_GOTCH); /* clear GOTCL */
-	adapter->stats.rnbc += rd32(E1000_RNBC);
+	rnbc = rd32(E1000_RNBC);
+	adapter->stats.rnbc += rnbc;
+	net_stats->rx_fifo_errors += rnbc;
 	adapter->stats.ruc += rd32(E1000_RUC);
 	adapter->stats.rfc += rd32(E1000_RFC);
 	adapter->stats.rjc += rd32(E1000_RJC);
@@ -3614,7 +4040,6 @@
 	adapter->stats.bptc += rd32(E1000_BPTC);
 
 	/* used for adaptive IFS */
-
 	hw->mac.tx_packet_delta = rd32(E1000_TPT);
 	adapter->stats.tpt += hw->mac.tx_packet_delta;
 	hw->mac.collision_delta = rd32(E1000_COLC);
@@ -3637,56 +4062,29 @@
 	adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	net_stats->multicast = adapter->stats.mprc;
+	net_stats->collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
-	if (hw->mac.type != e1000_82575) {
-		u32 rqdpc_tmp;
-		u64 rqdpc_total = 0;
-		int i;
-		/* Read out drops stats per RX queue.  Notice RQDPC (Receive
-		 * Queue Drop Packet Count) stats only gets incremented, if
-		 * the DROP_EN but it set (in the SRRCTL register for that
-		 * queue).  If DROP_EN bit is NOT set, then the some what
-		 * equivalent count is stored in RNBC (not per queue basis).
-		 * Also note the drop count is due to lack of available
-		 * descriptors.
-		 */
-		for (i = 0; i < adapter->num_rx_queues; i++) {
-			rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0xFFF;
-			adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
-			rqdpc_total += adapter->rx_ring[i].rx_stats.drops;
-		}
-		adapter->net_stats.rx_fifo_errors = rqdpc_total;
-	}
-
-	/* Note RNBC (Receive No Buffers Count) is an not an exact
-	 * drop count as the hardware FIFO might save the day.  Thats
-	 * one of the reason for saving it in rx_fifo_errors, as its
-	 * potentially not a true drop.
-	 */
-	adapter->net_stats.rx_fifo_errors += adapter->stats.rnbc;
-
 	/* RLEC on some newer hardware can be incorrect so build
 	 * our own version based on RUC and ROC */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	net_stats->rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
-	adapter->net_stats.rx_length_errors = adapter->stats.ruc +
-					      adapter->stats.roc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	net_stats->rx_length_errors = adapter->stats.ruc +
+				      adapter->stats.roc;
+	net_stats->rx_crc_errors = adapter->stats.crcerrs;
+	net_stats->rx_frame_errors = adapter->stats.algnerrc;
+	net_stats->rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
-	adapter->net_stats.tx_errors = adapter->stats.ecol +
-				       adapter->stats.latecol;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	net_stats->tx_errors = adapter->stats.ecol +
+			       adapter->stats.latecol;
+	net_stats->tx_aborted_errors = adapter->stats.ecol;
+	net_stats->tx_window_errors = adapter->stats.latecol;
+	net_stats->tx_carrier_errors = adapter->stats.tncrs;
 
 	/* Tx Dropped needs to be maintained elsewhere */
 
@@ -3707,14 +4105,12 @@
 
 static irqreturn_t igb_msix_other(int irq, void *data)
 {
-	struct net_device *netdev = data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = data;
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = rd32(E1000_ICR);
-
 	/* reading ICR causes bit 31 of EICR to be cleared */
 
-	if(icr & E1000_ICR_DOUTSYNC) {
+	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
 	}
@@ -3730,125 +4126,90 @@
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_VMMB);
+	if (adapter->vfs_allocated_count)
+		wr32(E1000_IMS, E1000_IMS_LSC |
+				E1000_IMS_VMMB |
+				E1000_IMS_DOUTSYNC);
+	else
+		wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC);
 	wr32(E1000_EIMS, adapter->eims_other);
 
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t igb_msix_tx(int irq, void *data)
+static void igb_write_itr(struct igb_q_vector *q_vector)
 {
-	struct igb_ring *tx_ring = data;
-	struct igb_adapter *adapter = tx_ring->adapter;
-	struct e1000_hw *hw = &adapter->hw;
+	u32 itr_val = q_vector->itr_val & 0x7FFC;
 
-#ifdef CONFIG_IGB_DCA
-	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
-		igb_update_tx_dca(tx_ring);
-#endif
+	if (!q_vector->set_itr)
+		return;
 
-	tx_ring->total_bytes = 0;
-	tx_ring->total_packets = 0;
+	if (!itr_val)
+		itr_val = 0x4;
 
-	/* auto mask will automatically reenable the interrupt when we write
-	 * EICS */
-	if (!igb_clean_tx_irq(tx_ring))
-		/* Ring was not completely cleaned, so fire another interrupt */
-		wr32(E1000_EICS, tx_ring->eims_value);
+	if (q_vector->itr_shift)
+		itr_val |= itr_val << q_vector->itr_shift;
 	else
-		wr32(E1000_EIMS, tx_ring->eims_value);
+		itr_val |= 0x8000000;
+
+	writel(itr_val, q_vector->itr_register);
+	q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+	struct igb_q_vector *q_vector = data;
+
+	/* Write the ITR value calculated from the previous interrupt. */
+	igb_write_itr(q_vector);
+
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
 
-static void igb_write_itr(struct igb_ring *ring)
-{
-	struct e1000_hw *hw = &ring->adapter->hw;
-	if ((ring->adapter->itr_setting & 3) && ring->set_itr) {
-		switch (hw->mac.type) {
-		case e1000_82576:
-			wr32(ring->itr_register, ring->itr_val |
-			     0x80000000);
-			break;
-		default:
-			wr32(ring->itr_register, ring->itr_val |
-			     (ring->itr_val << 16));
-			break;
-		}
-		ring->set_itr = 0;
-	}
-}
-
-static irqreturn_t igb_msix_rx(int irq, void *data)
-{
-	struct igb_ring *rx_ring = data;
-
-	/* Write the ITR value calculated at the end of the
-	 * previous interrupt.
-	 */
-
-	igb_write_itr(rx_ring);
-
-	if (napi_schedule_prep(&rx_ring->napi))
-		__napi_schedule(&rx_ring->napi);
-
 #ifdef CONFIG_IGB_DCA
-	if (rx_ring->adapter->flags & IGB_FLAG_DCA_ENABLED)
-		igb_update_rx_dca(rx_ring);
-#endif
-		return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_IGB_DCA
-static void igb_update_rx_dca(struct igb_ring *rx_ring)
+static void igb_update_dca(struct igb_q_vector *q_vector)
 {
-	u32 dca_rxctrl;
-	struct igb_adapter *adapter = rx_ring->adapter;
+	struct igb_adapter *adapter = q_vector->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 	int cpu = get_cpu();
-	int q = rx_ring->reg_idx;
 
-	if (rx_ring->cpu != cpu) {
-		dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
-		if (hw->mac.type == e1000_82576) {
+	if (q_vector->cpu == cpu)
+		goto out_no_update;
+
+	if (q_vector->tx_ring) {
+		int q = q_vector->tx_ring->reg_idx;
+		u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
+		if (hw->mac.type == e1000_82575) {
+			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
+			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		} else {
+			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
+			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
+			              E1000_DCA_TXCTRL_CPUID_SHIFT;
+		}
+		dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
+		wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
+	}
+	if (q_vector->rx_ring) {
+		int q = q_vector->rx_ring->reg_idx;
+		u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
+		if (hw->mac.type == e1000_82575) {
+			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
+			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		} else {
 			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
 			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
 			              E1000_DCA_RXCTRL_CPUID_SHIFT;
-		} else {
-			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
-			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		}
 		dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
 		dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
 		dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
 		wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
-		rx_ring->cpu = cpu;
 	}
-	put_cpu();
-}
-
-static void igb_update_tx_dca(struct igb_ring *tx_ring)
-{
-	u32 dca_txctrl;
-	struct igb_adapter *adapter = tx_ring->adapter;
-	struct e1000_hw *hw = &adapter->hw;
-	int cpu = get_cpu();
-	int q = tx_ring->reg_idx;
-
-	if (tx_ring->cpu != cpu) {
-		dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
-		if (hw->mac.type == e1000_82576) {
-			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
-			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
-			              E1000_DCA_TXCTRL_CPUID_SHIFT;
-		} else {
-			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
-			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
-		}
-		dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
-		wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
-		tx_ring->cpu = cpu;
-	}
+	q_vector->cpu = cpu;
+out_no_update:
 	put_cpu();
 }
 
@@ -3863,13 +4224,10 @@
 	/* Always use CB2 mode, difference is masked in the CB driver. */
 	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		adapter->tx_ring[i].cpu = -1;
-		igb_update_tx_dca(&adapter->tx_ring[i]);
-	}
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		adapter->rx_ring[i].cpu = -1;
-		igb_update_rx_dca(&adapter->rx_ring[i]);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		q_vector->cpu = -1;
+		igb_update_dca(q_vector);
 	}
 }
 
@@ -3877,6 +4235,7 @@
 {
 	struct net_device *netdev = dev_get_drvdata(dev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned long event = *(unsigned long *)data;
 
@@ -3885,12 +4244,9 @@
 		/* if already enabled, don't do it again */
 		if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 			break;
-		/* Always use CB2 mode, difference is masked
-		 * in the CB driver. */
-		wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 		if (dca_add_requester(dev) == 0) {
 			adapter->flags |= IGB_FLAG_DCA_ENABLED;
-			dev_info(&adapter->pdev->dev, "DCA enabled\n");
+			dev_info(&pdev->dev, "DCA enabled\n");
 			igb_setup_dca(adapter);
 			break;
 		}
@@ -3898,9 +4254,9 @@
 	case DCA_PROVIDER_REMOVE:
 		if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
 			/* without this a class_device is left
- 			 * hanging around in the sysfs model */
+			 * hanging around in the sysfs model */
 			dca_remove_requester(dev);
-			dev_info(&adapter->pdev->dev, "DCA disabled\n");
+			dev_info(&pdev->dev, "DCA disabled\n");
 			adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
 			wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
 		}
@@ -3930,12 +4286,51 @@
 
 	for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
 		ping = E1000_PF_CONTROL_MSG;
-		if (adapter->vf_data[i].clear_to_send)
+		if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
 			ping |= E1000_VT_MSGTYPE_CTS;
 		igb_write_mbx(hw, &ping, 1, i);
 	}
 }
 
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr = rd32(E1000_VMOLR(vf));
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+	vf_data->flags |= ~(IGB_VF_FLAG_UNI_PROMISC |
+	                    IGB_VF_FLAG_MULTI_PROMISC);
+	vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+	if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+		vmolr |= E1000_VMOLR_MPME;
+		*msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+	} else {
+		/*
+		 * if we have hashes and we are clearing a multicast promisc
+		 * flag we need to write the hashes to the MTA as this step
+		 * was previously skipped
+		 */
+		if (vf_data->num_vf_mc_hashes > 30) {
+			vmolr |= E1000_VMOLR_MPME;
+		} else if (vf_data->num_vf_mc_hashes) {
+			int j;
+			vmolr |= E1000_VMOLR_ROMPE;
+			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+		}
+	}
+
+	wr32(E1000_VMOLR(vf), vmolr);
+
+	/* there are flags left unprocessed, likely not supported */
+	if (*msgbuf & E1000_VT_MSGINFO_MASK)
+		return -EINVAL;
+
+	return 0;
+
+}
+
 static int igb_set_vf_multicasts(struct igb_adapter *adapter,
 				  u32 *msgbuf, u32 vf)
 {
@@ -3944,18 +4339,17 @@
 	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
 	int i;
 
-	/* only up to 30 hash values supported */
-	if (n > 30)
-		n = 30;
-
-	/* salt away the number of multi cast addresses assigned
+	/* salt away the number of multicast addresses assigned
 	 * to this VF for later use to restore when the PF multi cast
 	 * list changes
 	 */
 	vf_data->num_vf_mc_hashes = n;
 
-	/* VFs are limited to using the MTA hash table for their multicast
-	 * addresses */
+	/* only up to 30 hash values supported */
+	if (n > 30)
+		n = 30;
+
+	/* store the hashes for later use */
 	for (i = 0; i < n; i++)
 		vf_data->vf_mc_hashes[i] = hash_list[i];
 
@@ -3972,9 +4366,20 @@
 	int i, j;
 
 	for (i = 0; i < adapter->vfs_allocated_count; i++) {
+		u32 vmolr = rd32(E1000_VMOLR(i));
+		vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
 		vf_data = &adapter->vf_data[i];
-		for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
-			igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+
+		if ((vf_data->num_vf_mc_hashes > 30) ||
+		    (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+			vmolr |= E1000_VMOLR_MPME;
+		} else if (vf_data->num_vf_mc_hashes) {
+			vmolr |= E1000_VMOLR_ROMPE;
+			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+		}
+		wr32(E1000_VMOLR(i), vmolr);
 	}
 }
 
@@ -4012,7 +4417,11 @@
 	struct e1000_hw *hw = &adapter->hw;
 	u32 reg, i;
 
-	/* It is an error to call this function when VFs are not enabled */
+	/* The vlvf table only exists on 82576 hardware and newer */
+	if (hw->mac.type < e1000_82576)
+		return -1;
+
+	/* we only need to do this if VMDq is enabled */
 	if (!adapter->vfs_allocated_count)
 		return -1;
 
@@ -4042,16 +4451,12 @@
 
 			/* if !enabled we need to set this up in vfta */
 			if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
-				/* add VID to filter table, if bit already set
-				 * PF must have added it outside of table */
-				if (igb_vfta_set(hw, vid, true))
-					reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT +
-						adapter->vfs_allocated_count);
+				/* add VID to filter table */
+				igb_vfta_set(hw, vid, true);
 				reg |= E1000_VLVF_VLANID_ENABLE;
 			}
 			reg &= ~E1000_VLVF_VLANID_MASK;
 			reg |= vid;
-
 			wr32(E1000_VLVF(i), reg);
 
 			/* do not modify RLPML for PF devices */
@@ -4067,8 +4472,8 @@
 				reg |= size;
 				wr32(E1000_VMOLR(vf), reg);
 			}
-			adapter->vf_data[vf].vlans_enabled++;
 
+			adapter->vf_data[vf].vlans_enabled++;
 			return 0;
 		}
 	} else {
@@ -4110,15 +4515,14 @@
 	return igb_vlvf_set(adapter, vid, add, vf);
 }
 
-static inline void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
 {
-	struct e1000_hw *hw = &adapter->hw;
-
-	/* disable mailbox functionality for vf */
-	adapter->vf_data[vf].clear_to_send = false;
+	/* clear all flags */
+	adapter->vf_data[vf].flags = 0;
+	adapter->vf_data[vf].last_nack = jiffies;
 
 	/* reset offloads to defaults */
-	igb_set_vmolr(hw, vf);
+	igb_set_vmolr(adapter, vf);
 
 	/* reset vlans for device */
 	igb_clear_vf_vfta(adapter, vf);
@@ -4130,7 +4534,18 @@
 	igb_set_rx_mode(adapter->netdev);
 }
 
-static inline void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+	/* generate a new mac address as we were hotplug removed/added */
+	random_ether_addr(vf_mac);
+
+	/* process remaining reset events */
+	igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
@@ -4139,11 +4554,10 @@
 	u8 *addr = (u8 *)(&msgbuf[1]);
 
 	/* process all the same items cleared in a function level reset */
-	igb_vf_reset_event(adapter, vf);
+	igb_vf_reset(adapter, vf);
 
 	/* set vf mac address */
-	igb_rar_set(hw, vf_mac, rar_entry);
-	igb_set_rah_pool(hw, vf, rar_entry);
+	igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
 
 	/* enable transmit and receive for vf */
 	reg = rd32(E1000_VFTE);
@@ -4151,8 +4565,7 @@
 	reg = rd32(E1000_VFRE);
 	wr32(E1000_VFRE, reg | (1 << vf));
 
-	/* enable mailbox functionality for vf */
-	adapter->vf_data[vf].clear_to_send = true;
+	adapter->vf_data[vf].flags = IGB_VF_FLAG_CTS;
 
 	/* reply to reset with ack and vf mac address */
 	msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
@@ -4162,66 +4575,45 @@
 
 static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
 {
-		unsigned char *addr = (char *)&msg[1];
-		int err = -1;
+	unsigned char *addr = (char *)&msg[1];
+	int err = -1;
 
-		if (is_valid_ether_addr(addr))
-			err = igb_set_vf_mac(adapter, vf, addr);
+	if (is_valid_ether_addr(addr))
+		err = igb_set_vf_mac(adapter, vf, addr);
 
-		return err;
-
+	return err;
 }
 
 static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
 	u32 msg = E1000_VT_MSGTYPE_NACK;
 
 	/* if device isn't clear to send it shouldn't be reading either */
-	if (!adapter->vf_data[vf].clear_to_send)
+	if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+	    time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
 		igb_write_mbx(hw, &msg, 1, vf);
-}
-
-
-static void igb_msg_task(struct igb_adapter *adapter)
-{
-	struct e1000_hw *hw = &adapter->hw;
-	u32 vf;
-
-	for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
-		/* process any reset requests */
-		if (!igb_check_for_rst(hw, vf)) {
-			adapter->vf_data[vf].clear_to_send = false;
-			igb_vf_reset_event(adapter, vf);
-		}
-
-		/* process any messages pending */
-		if (!igb_check_for_msg(hw, vf))
-			igb_rcv_msg_from_vf(adapter, vf);
-
-		/* process any acks */
-		if (!igb_check_for_ack(hw, vf))
-			igb_rcv_ack_from_vf(adapter, vf);
-
+		vf_data->last_nack = jiffies;
 	}
 }
 
-static int igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
 {
-	u32 mbx_size = E1000_VFMAILBOX_SIZE;
-	u32 msgbuf[mbx_size];
+	struct pci_dev *pdev = adapter->pdev;
+	u32 msgbuf[E1000_VFMAILBOX_SIZE];
 	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
 	s32 retval;
 
-	retval = igb_read_mbx(hw, msgbuf, mbx_size, vf);
+	retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
 
 	if (retval)
-		dev_err(&adapter->pdev->dev,
-		        "Error receiving message from VF\n");
+		dev_err(&pdev->dev, "Error receiving message from VF\n");
 
 	/* this is a message we already processed, do nothing */
 	if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
-		return retval;
+		return;
 
 	/*
 	 * until the vf completes a reset it should not be
@@ -4230,20 +4622,25 @@
 
 	if (msgbuf[0] == E1000_VF_RESET) {
 		igb_vf_reset_msg(adapter, vf);
-
-		return retval;
+		return;
 	}
 
-	if (!adapter->vf_data[vf].clear_to_send) {
-		msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
-		igb_write_mbx(hw, msgbuf, 1, vf);
-		return retval;
+	if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+		msgbuf[0] = E1000_VT_MSGTYPE_NACK;
+		if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+			igb_write_mbx(hw, msgbuf, 1, vf);
+			vf_data->last_nack = jiffies;
+		}
+		return;
 	}
 
 	switch ((msgbuf[0] & 0xFFFF)) {
 	case E1000_VF_SET_MAC_ADDR:
 		retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
 		break;
+	case E1000_VF_SET_PROMISC:
+		retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+		break;
 	case E1000_VF_SET_MULTICAST:
 		retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
 		break;
@@ -4254,7 +4651,7 @@
 		retval = igb_set_vf_vlan(adapter, msgbuf, vf);
 		break;
 	default:
-		dev_err(&adapter->pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+		dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
 		retval = -1;
 		break;
 	}
@@ -4268,8 +4665,53 @@
 	msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
 
 	igb_write_mbx(hw, msgbuf, 1, vf);
+}
 
-	return retval;
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vf;
+
+	for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+		/* process any reset requests */
+		if (!igb_check_for_rst(hw, vf))
+			igb_vf_reset_event(adapter, vf);
+
+		/* process any messages pending */
+		if (!igb_check_for_msg(hw, vf))
+			igb_rcv_msg_from_vf(adapter, vf);
+
+		/* process any acks */
+		if (!igb_check_for_ack(hw, vf))
+			igb_rcv_ack_from_vf(adapter, vf);
+	}
+}
+
+/**
+ *  igb_set_uta - Set unicast filter table address
+ *  @adapter: board private structure
+ *
+ *  The unicast table address is a register array of 32-bit registers.
+ *  The table is meant to be used in a way similar to how the MTA is used
+ *  however due to certain limitations in the hardware it is necessary to
+ *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
+ *  enable bit to allow vlan tag stripping when promiscous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i;
+
+	/* The UTA table only exists on 82576 hardware and newer */
+	if (hw->mac.type < e1000_82576)
+		return;
+
+	/* we only need to do this if VMDq is enabled */
+	if (!adapter->vfs_allocated_count)
+		return;
+
+	for (i = 0; i < hw->mac.uta_reg_count; i++)
+		array_wr32(E1000_UTA, i, ~0);
 }
 
 /**
@@ -4279,15 +4721,15 @@
  **/
 static irqreturn_t igb_intr_msi(int irq, void *data)
 {
-	struct net_device *netdev = data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = data;
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
 	struct e1000_hw *hw = &adapter->hw;
 	/* read ICR disables interrupts using IAM */
 	u32 icr = rd32(E1000_ICR);
 
-	igb_write_itr(adapter->rx_ring);
+	igb_write_itr(q_vector);
 
-	if(icr & E1000_ICR_DOUTSYNC) {
+	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
 	}
@@ -4298,7 +4740,7 @@
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	napi_schedule(&adapter->rx_ring[0].napi);
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
@@ -4310,8 +4752,8 @@
  **/
 static irqreturn_t igb_intr(int irq, void *data)
 {
-	struct net_device *netdev = data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = data;
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
 	struct e1000_hw *hw = &adapter->hw;
 	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
 	 * need for the IMC write */
@@ -4319,14 +4761,14 @@
 	if (!icr)
 		return IRQ_NONE;  /* Not our interrupt */
 
-	igb_write_itr(adapter->rx_ring);
+	igb_write_itr(q_vector);
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
 	 * not set, then the adapter didn't send an interrupt */
 	if (!(icr & E1000_ICR_INT_ASSERTED))
 		return IRQ_NONE;
 
-	if(icr & E1000_ICR_DOUTSYNC) {
+	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
 	}
@@ -4338,26 +4780,27 @@
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	napi_schedule(&adapter->rx_ring[0].napi);
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
 
-static inline void igb_rx_irq_enable(struct igb_ring *rx_ring)
+static inline void igb_ring_irq_enable(struct igb_q_vector *q_vector)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
+	struct igb_adapter *adapter = q_vector->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 
-	if (adapter->itr_setting & 3) {
-		if (adapter->num_rx_queues == 1)
+	if ((q_vector->rx_ring && (adapter->rx_itr_setting & 3)) ||
+	    (!q_vector->rx_ring && (adapter->tx_itr_setting & 3))) {
+		if (!adapter->msix_entries)
 			igb_set_itr(adapter);
 		else
-			igb_update_ring_itr(rx_ring);
+			igb_update_ring_itr(q_vector);
 	}
 
 	if (!test_bit(__IGB_DOWN, &adapter->state)) {
 		if (adapter->msix_entries)
-			wr32(E1000_EIMS, rx_ring->eims_value);
+			wr32(E1000_EIMS, q_vector->eims_value);
 		else
 			igb_irq_enable(adapter);
 	}
@@ -4370,76 +4813,101 @@
  **/
 static int igb_poll(struct napi_struct *napi, int budget)
 {
-	struct igb_ring *rx_ring = container_of(napi, struct igb_ring, napi);
-	int work_done = 0;
+	struct igb_q_vector *q_vector = container_of(napi,
+	                                             struct igb_q_vector,
+	                                             napi);
+	int tx_clean_complete = 1, work_done = 0;
 
 #ifdef CONFIG_IGB_DCA
-	if (rx_ring->adapter->flags & IGB_FLAG_DCA_ENABLED)
-		igb_update_rx_dca(rx_ring);
+	if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+		igb_update_dca(q_vector);
 #endif
-	igb_clean_rx_irq_adv(rx_ring, &work_done, budget);
+	if (q_vector->tx_ring)
+		tx_clean_complete = igb_clean_tx_irq(q_vector);
 
-	if (rx_ring->buddy) {
-#ifdef CONFIG_IGB_DCA
-		if (rx_ring->adapter->flags & IGB_FLAG_DCA_ENABLED)
-			igb_update_tx_dca(rx_ring->buddy);
-#endif
-		if (!igb_clean_tx_irq(rx_ring->buddy))
-			work_done = budget;
-	}
+	if (q_vector->rx_ring)
+		igb_clean_rx_irq_adv(q_vector, &work_done, budget);
+
+	if (!tx_clean_complete)
+		work_done = budget;
 
 	/* If not enough Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
-		igb_rx_irq_enable(rx_ring);
+		igb_ring_irq_enable(q_vector);
 	}
 
 	return work_done;
 }
 
 /**
- * igb_hwtstamp - utility function which checks for TX time stamp
+ * igb_systim_to_hwtstamp - convert system time value to hw timestamp
  * @adapter: board private structure
+ * @shhwtstamps: timestamp structure to update
+ * @regval: unsigned 64bit system time value.
+ *
+ * We need to convert the system time value stored in the RX/TXSTMP registers
+ * into a hwtstamp which can be used by the upper level timestamping functions
+ */
+static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
+                                   struct skb_shared_hwtstamps *shhwtstamps,
+                                   u64 regval)
+{
+	u64 ns;
+
+	/*
+	 * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
+	 * 24 to match clock shift we setup earlier.
+	 */
+	if (adapter->hw.mac.type == e1000_82580)
+		regval <<= IGB_82580_TSYNC_SHIFT;
+
+	ns = timecounter_cyc2time(&adapter->clock, regval);
+	timecompare_update(&adapter->compare, ns);
+	memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
+	shhwtstamps->hwtstamp = ns_to_ktime(ns);
+	shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
+}
+
+/**
+ * igb_tx_hwtstamp - utility function which checks for TX time stamp
+ * @q_vector: pointer to q_vector containing needed info
  * @skb: packet that was just sent
  *
  * If we were asked to do hardware stamping and such a time stamp is
  * available, then it must have been for this skb here because we only
  * allow only one such packet into the queue.
  */
-static void igb_tx_hwtstamp(struct igb_adapter *adapter, struct sk_buff *skb)
+static void igb_tx_hwtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb)
 {
+	struct igb_adapter *adapter = q_vector->adapter;
 	union skb_shared_tx *shtx = skb_tx(skb);
 	struct e1000_hw *hw = &adapter->hw;
+	struct skb_shared_hwtstamps shhwtstamps;
+	u64 regval;
 
-	if (unlikely(shtx->hardware)) {
-		u32 valid = rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID;
-		if (valid) {
-			u64 regval = rd32(E1000_TXSTMPL);
-			u64 ns;
-			struct skb_shared_hwtstamps shhwtstamps;
+	/* if skb does not support hw timestamp or TX stamp not valid exit */
+	if (likely(!shtx->hardware) ||
+	    !(rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
+		return;
 
-			memset(&shhwtstamps, 0, sizeof(shhwtstamps));
-			regval |= (u64)rd32(E1000_TXSTMPH) << 32;
-			ns = timecounter_cyc2time(&adapter->clock,
-						  regval);
-			timecompare_update(&adapter->compare, ns);
-			shhwtstamps.hwtstamp = ns_to_ktime(ns);
-			shhwtstamps.syststamp =
-				timecompare_transform(&adapter->compare, ns);
-			skb_tstamp_tx(skb, &shhwtstamps);
-		}
-	}
+	regval = rd32(E1000_TXSTMPL);
+	regval |= (u64)rd32(E1000_TXSTMPH) << 32;
+
+	igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
+	skb_tstamp_tx(skb, &shhwtstamps);
 }
 
 /**
  * igb_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
+ * @q_vector: pointer to q_vector containing needed info
  * returns true if ring is completely cleaned
  **/
-static bool igb_clean_tx_irq(struct igb_ring *tx_ring)
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
 {
-	struct igb_adapter *adapter = tx_ring->adapter;
-	struct net_device *netdev = adapter->netdev;
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct igb_ring *tx_ring = q_vector->tx_ring;
+	struct net_device *netdev = tx_ring->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct igb_buffer *buffer_info;
 	struct sk_buff *skb;
@@ -4470,10 +4938,10 @@
 				total_packets += segs;
 				total_bytes += bytecount;
 
-				igb_tx_hwtstamp(adapter, skb);
+				igb_tx_hwtstamp(q_vector, skb);
 			}
 
-			igb_unmap_and_free_tx_resource(adapter, buffer_info);
+			igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
 			tx_desc->wb.status = 0;
 
 			i++;
@@ -4496,7 +4964,7 @@
 		if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
 		    !(test_bit(__IGB_DOWN, &adapter->state))) {
 			netif_wake_subqueue(netdev, tx_ring->queue_index);
-			++adapter->restart_queue;
+			tx_ring->tx_stats.restart_queue++;
 		}
 	}
 
@@ -4506,12 +4974,11 @@
 		tx_ring->detect_tx_hung = false;
 		if (tx_ring->buffer_info[i].time_stamp &&
 		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
-			       (adapter->tx_timeout_factor * HZ))
-		    && !(rd32(E1000_STATUS) &
-			 E1000_STATUS_TXOFF)) {
+			       (adapter->tx_timeout_factor * HZ)) &&
+		    !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
 
 			/* detected Tx unit hang */
-			dev_err(&adapter->pdev->dev,
+			dev_err(&tx_ring->pdev->dev,
 				"Detected Tx Unit Hang\n"
 				"  Tx Queue             <%d>\n"
 				"  TDH                  <%x>\n"
@@ -4524,11 +4991,11 @@
 				"  jiffies              <%lx>\n"
 				"  desc.status          <%x>\n",
 				tx_ring->queue_index,
-				readl(adapter->hw.hw_addr + tx_ring->head),
-				readl(adapter->hw.hw_addr + tx_ring->tail),
+				readl(tx_ring->head),
+				readl(tx_ring->tail),
 				tx_ring->next_to_use,
 				tx_ring->next_to_clean,
-				tx_ring->buffer_info[i].time_stamp,
+				tx_ring->buffer_info[eop].time_stamp,
 				eop,
 				jiffies,
 				eop_desc->wb.status);
@@ -4539,43 +5006,38 @@
 	tx_ring->total_packets += total_packets;
 	tx_ring->tx_stats.bytes += total_bytes;
 	tx_ring->tx_stats.packets += total_packets;
-	adapter->net_stats.tx_bytes += total_bytes;
-	adapter->net_stats.tx_packets += total_packets;
 	return (count < tx_ring->count);
 }
 
 /**
  * igb_receive_skb - helper function to handle rx indications
- * @ring: pointer to receive ring receving this packet
- * @status: descriptor status field as written by hardware
- * @rx_desc: receive descriptor containing vlan and type information.
- * @skb: pointer to sk_buff to be indicated to stack
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: packet to send up
+ * @vlan_tag: vlan tag for packet
  **/
-static void igb_receive_skb(struct igb_ring *ring, u8 status,
-                            union e1000_adv_rx_desc * rx_desc,
-                            struct sk_buff *skb)
+static void igb_receive_skb(struct igb_q_vector *q_vector,
+                            struct sk_buff *skb,
+                            u16 vlan_tag)
 {
-	struct igb_adapter * adapter = ring->adapter;
-	bool vlan_extracted = (adapter->vlgrp && (status & E1000_RXD_STAT_VP));
+	struct igb_adapter *adapter = q_vector->adapter;
 
-	skb_record_rx_queue(skb, ring->queue_index);
-	if (vlan_extracted)
-		vlan_gro_receive(&ring->napi, adapter->vlgrp,
-		                 le16_to_cpu(rx_desc->wb.upper.vlan),
-		                 skb);
+	if (vlan_tag)
+		vlan_gro_receive(&q_vector->napi, adapter->vlgrp,
+		                 vlan_tag, skb);
 	else
-		napi_gro_receive(&ring->napi, skb);
+		napi_gro_receive(&q_vector->napi, skb);
 }
 
-static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
+static inline void igb_rx_checksum_adv(struct igb_ring *ring,
 				       u32 status_err, struct sk_buff *skb)
 {
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
-	if ((status_err & E1000_RXD_STAT_IXSM) ||
-	    (adapter->flags & IGB_FLAG_RX_CSUM_DISABLED))
+	if (!(ring->flags & IGB_RING_FLAG_RX_CSUM) ||
+	     (status_err & E1000_RXD_STAT_IXSM))
 		return;
+
 	/* TCP/UDP checksum error bit is set */
 	if (status_err &
 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
@@ -4584,9 +5046,10 @@
 		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
 		 * packets, (aka let the stack check the crc32c)
 		 */
-		if (!((adapter->hw.mac.type == e1000_82576) &&
-		      (skb->len == 60)))
-			adapter->hw_csum_err++;
+		if ((skb->len == 60) &&
+		    (ring->flags & IGB_RING_FLAG_RX_SCTP_CSUM))
+			ring->rx_stats.csum_err++;
+
 		/* let the stack verify checksum errors */
 		return;
 	}
@@ -4594,11 +5057,38 @@
 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-	dev_dbg(&adapter->pdev->dev, "cksum success: bits %08X\n", status_err);
-	adapter->hw_csum_good++;
+	dev_dbg(&ring->pdev->dev, "cksum success: bits %08X\n", status_err);
 }
 
-static inline u16 igb_get_hlen(struct igb_adapter *adapter,
+static inline void igb_rx_hwtstamp(struct igb_q_vector *q_vector, u32 staterr,
+                                   struct sk_buff *skb)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	u64 regval;
+
+	/*
+	 * If this bit is set, then the RX registers contain the time stamp. No
+	 * other packet will be time stamped until we read these registers, so
+	 * read the registers to make them available again. Because only one
+	 * packet can be time stamped at a time, we know that the register
+	 * values must belong to this one here and therefore we don't need to
+	 * compare any of the additional attributes stored for it.
+	 *
+	 * If nothing went wrong, then it should have a skb_shared_tx that we
+	 * can turn into a skb_shared_hwtstamps.
+	 */
+	if (likely(!(staterr & E1000_RXDADV_STAT_TS)))
+		return;
+	if (!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+		return;
+
+	regval = rd32(E1000_RXSTMPL);
+	regval |= (u64)rd32(E1000_RXSTMPH) << 32;
+
+	igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+}
+static inline u16 igb_get_hlen(struct igb_ring *rx_ring,
                                union e1000_adv_rx_desc *rx_desc)
 {
 	/* HW will not DMA in data larger than the given buffer, even if it
@@ -4607,27 +5097,28 @@
 	 */
 	u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
 	           E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
-	if (hlen > adapter->rx_ps_hdr_size)
-		hlen = adapter->rx_ps_hdr_size;
+	if (hlen > rx_ring->rx_buffer_len)
+		hlen = rx_ring->rx_buffer_len;
 	return hlen;
 }
 
-static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring,
-				 int *work_done, int budget)
+static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
+                                 int *work_done, int budget)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
-	struct net_device *netdev = adapter->netdev;
-	struct e1000_hw *hw = &adapter->hw;
-	struct pci_dev *pdev = adapter->pdev;
+	struct igb_ring *rx_ring = q_vector->rx_ring;
+	struct net_device *netdev = rx_ring->netdev;
+	struct pci_dev *pdev = rx_ring->pdev;
 	union e1000_adv_rx_desc *rx_desc , *next_rxd;
 	struct igb_buffer *buffer_info , *next_buffer;
 	struct sk_buff *skb;
 	bool cleaned = false;
 	int cleaned_count = 0;
+	int current_node = numa_node_id();
 	unsigned int total_bytes = 0, total_packets = 0;
 	unsigned int i;
 	u32 staterr;
 	u16 length;
+	u16 vlan_tag;
 
 	i = rx_ring->next_to_clean;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -4646,6 +5137,7 @@
 		i++;
 		if (i == rx_ring->count)
 			i = 0;
+
 		next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
 		prefetch(next_rxd);
 		next_buffer = &rx_ring->buffer_info[i];
@@ -4654,23 +5146,16 @@
 		cleaned = true;
 		cleaned_count++;
 
-		/* this is the fast path for the non-packet split case */
-		if (!adapter->rx_ps_hdr_size) {
-			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_buffer_len,
-					 PCI_DMA_FROMDEVICE);
-			buffer_info->dma = 0;
-			skb_put(skb, length);
-			goto send_up;
-		}
-
 		if (buffer_info->dma) {
-			u16 hlen = igb_get_hlen(adapter, rx_desc);
 			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_ps_hdr_size,
+					 rx_ring->rx_buffer_len,
 					 PCI_DMA_FROMDEVICE);
 			buffer_info->dma = 0;
-			skb_put(skb, hlen);
+			if (rx_ring->rx_buffer_len >= IGB_RXBUFFER_1024) {
+				skb_put(skb, length);
+				goto send_up;
+			}
+			skb_put(skb, igb_get_hlen(rx_ring, rx_desc));
 		}
 
 		if (length) {
@@ -4683,15 +5168,14 @@
 						buffer_info->page_offset,
 						length);
 
-			if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
-			    (page_count(buffer_info->page) != 1))
+			if ((page_count(buffer_info->page) != 1) ||
+			    (page_to_nid(buffer_info->page) != current_node))
 				buffer_info->page = NULL;
 			else
 				get_page(buffer_info->page);
 
 			skb->len += length;
 			skb->data_len += length;
-
 			skb->truesize += length;
 		}
 
@@ -4703,60 +5187,24 @@
 			goto next_desc;
 		}
 send_up:
-		/*
-		 * If this bit is set, then the RX registers contain
-		 * the time stamp. No other packet will be time
-		 * stamped until we read these registers, so read the
-		 * registers to make them available again. Because
-		 * only one packet can be time stamped at a time, we
-		 * know that the register values must belong to this
-		 * one here and therefore we don't need to compare
-		 * any of the additional attributes stored for it.
-		 *
-		 * If nothing went wrong, then it should have a
-		 * skb_shared_tx that we can turn into a
-		 * skb_shared_hwtstamps.
-		 *
-		 * TODO: can time stamping be triggered (thus locking
-		 * the registers) without the packet reaching this point
-		 * here? In that case RX time stamping would get stuck.
-		 *
-		 * TODO: in "time stamp all packets" mode this bit is
-		 * not set. Need a global flag for this mode and then
-		 * always read the registers. Cannot be done without
-		 * a race condition.
-		 */
-		if (unlikely(staterr & E1000_RXD_STAT_TS)) {
-			u64 regval;
-			u64 ns;
-			struct skb_shared_hwtstamps *shhwtstamps =
-				skb_hwtstamps(skb);
-
-			WARN(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID),
-			     "igb: no RX time stamp available for time stamped packet");
-			regval = rd32(E1000_RXSTMPL);
-			regval |= (u64)rd32(E1000_RXSTMPH) << 32;
-			ns = timecounter_cyc2time(&adapter->clock, regval);
-			timecompare_update(&adapter->compare, ns);
-			memset(shhwtstamps, 0, sizeof(*shhwtstamps));
-			shhwtstamps->hwtstamp = ns_to_ktime(ns);
-			shhwtstamps->syststamp =
-				timecompare_transform(&adapter->compare, ns);
-		}
-
 		if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
 
+		igb_rx_hwtstamp(q_vector, staterr, skb);
 		total_bytes += skb->len;
 		total_packets++;
 
-		igb_rx_checksum_adv(adapter, staterr, skb);
+		igb_rx_checksum_adv(rx_ring, staterr, skb);
 
 		skb->protocol = eth_type_trans(skb, netdev);
+		skb_record_rx_queue(skb, rx_ring->queue_index);
 
-		igb_receive_skb(rx_ring, staterr, rx_desc, skb);
+		vlan_tag = ((staterr & E1000_RXD_STAT_VP) ?
+		            le16_to_cpu(rx_desc->wb.upper.vlan) : 0);
+
+		igb_receive_skb(q_vector, skb, vlan_tag);
 
 next_desc:
 		rx_desc->wb.upper.status_error = 0;
@@ -4783,8 +5231,6 @@
 	rx_ring->total_bytes += total_bytes;
 	rx_ring->rx_stats.packets += total_packets;
 	rx_ring->rx_stats.bytes += total_bytes;
-	adapter->net_stats.rx_bytes += total_bytes;
-	adapter->net_stats.rx_packets += total_packets;
 	return cleaned;
 }
 
@@ -4792,12 +5238,9 @@
  * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
  * @adapter: address of board private structure
  **/
-static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring,
-				     int cleaned_count)
+void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, int cleaned_count)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
-	struct net_device *netdev = adapter->netdev;
-	struct pci_dev *pdev = adapter->pdev;
+	struct net_device *netdev = rx_ring->netdev;
 	union e1000_adv_rx_desc *rx_desc;
 	struct igb_buffer *buffer_info;
 	struct sk_buff *skb;
@@ -4807,19 +5250,16 @@
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
 
-	if (adapter->rx_ps_hdr_size)
-		bufsz = adapter->rx_ps_hdr_size;
-	else
-		bufsz = adapter->rx_buffer_len;
+	bufsz = rx_ring->rx_buffer_len;
 
 	while (cleaned_count--) {
 		rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
 
-		if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) {
+		if ((bufsz < IGB_RXBUFFER_1024) && !buffer_info->page_dma) {
 			if (!buffer_info->page) {
-				buffer_info->page = alloc_page(GFP_ATOMIC);
+				buffer_info->page = netdev_alloc_page(netdev);
 				if (!buffer_info->page) {
-					adapter->alloc_rx_buff_failed++;
+					rx_ring->rx_stats.alloc_failed++;
 					goto no_buffers;
 				}
 				buffer_info->page_offset = 0;
@@ -4827,39 +5267,48 @@
 				buffer_info->page_offset ^= PAGE_SIZE / 2;
 			}
 			buffer_info->page_dma =
-				pci_map_page(pdev, buffer_info->page,
+				pci_map_page(rx_ring->pdev, buffer_info->page,
 					     buffer_info->page_offset,
 					     PAGE_SIZE / 2,
 					     PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(rx_ring->pdev,
+			                          buffer_info->page_dma)) {
+				buffer_info->page_dma = 0;
+				rx_ring->rx_stats.alloc_failed++;
+				goto no_buffers;
+			}
 		}
 
-		if (!buffer_info->skb) {
-			skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
+		skb = buffer_info->skb;
+		if (!skb) {
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			if (!skb) {
-				adapter->alloc_rx_buff_failed++;
+				rx_ring->rx_stats.alloc_failed++;
 				goto no_buffers;
 			}
 
-			/* Make buffer alignment 2 beyond a 16 byte boundary
-			 * this will result in a 16 byte aligned IP header after
-			 * the 14 byte MAC header is removed
-			 */
-			skb_reserve(skb, NET_IP_ALIGN);
-
 			buffer_info->skb = skb;
-			buffer_info->dma = pci_map_single(pdev, skb->data,
+		}
+		if (!buffer_info->dma) {
+			buffer_info->dma = pci_map_single(rx_ring->pdev,
+			                                  skb->data,
 							  bufsz,
 							  PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(rx_ring->pdev,
+			                          buffer_info->dma)) {
+				buffer_info->dma = 0;
+				rx_ring->rx_stats.alloc_failed++;
+				goto no_buffers;
+			}
 		}
 		/* Refresh the desc even if buffer_addrs didn't change because
 		 * each write-back erases this info. */
-		if (adapter->rx_ps_hdr_size) {
+		if (bufsz < IGB_RXBUFFER_1024) {
 			rx_desc->read.pkt_addr =
 			     cpu_to_le64(buffer_info->page_dma);
 			rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
 		} else {
-			rx_desc->read.pkt_addr =
-			     cpu_to_le64(buffer_info->dma);
+			rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
 			rx_desc->read.hdr_addr = 0;
 		}
 
@@ -4882,7 +5331,7 @@
 		 * applicable for weak-ordered memory model archs,
 		 * such as IA-64). */
 		wmb();
-		writel(i, adapter->hw.hw_addr + rx_ring->tail);
+		writel(i, rx_ring->tail);
 	}
 }
 
@@ -4941,13 +5390,11 @@
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	struct hwtstamp_config config;
-	u32 tsync_tx_ctl_bit = E1000_TSYNCTXCTL_ENABLED;
-	u32 tsync_rx_ctl_bit = E1000_TSYNCRXCTL_ENABLED;
-	u32 tsync_rx_ctl_type = 0;
+	u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+	u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
 	u32 tsync_rx_cfg = 0;
-	int is_l4 = 0;
-	int is_l2 = 0;
-	short port = 319; /* PTP */
+	bool is_l4 = false;
+	bool is_l2 = false;
 	u32 regval;
 
 	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
@@ -4959,10 +5406,8 @@
 
 	switch (config.tx_type) {
 	case HWTSTAMP_TX_OFF:
-		tsync_tx_ctl_bit = 0;
-		break;
+		tsync_tx_ctl = 0;
 	case HWTSTAMP_TX_ON:
-		tsync_tx_ctl_bit = E1000_TSYNCTXCTL_ENABLED;
 		break;
 	default:
 		return -ERANGE;
@@ -4970,7 +5415,7 @@
 
 	switch (config.rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
-		tsync_rx_ctl_bit = 0;
+		tsync_rx_ctl = 0;
 		break;
 	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
@@ -4981,86 +5426,97 @@
 		 * possible to time stamp both Sync and Delay_Req messages
 		 * => fall back to time stamping all packets
 		 */
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_ALL;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
 		config.rx_filter = HWTSTAMP_FILTER_ALL;
 		break;
 	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
-		is_l4 = 1;
+		is_l4 = true;
 		break;
 	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
-		is_l4 = 1;
+		is_l4 = true;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
 	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
-		is_l2 = 1;
-		is_l4 = 1;
+		is_l2 = true;
+		is_l4 = true;
 		config.rx_filter = HWTSTAMP_FILTER_SOME;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
 	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
-		is_l2 = 1;
-		is_l4 = 1;
+		is_l2 = true;
+		is_l4 = true;
 		config.rx_filter = HWTSTAMP_FILTER_SOME;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_SYNC:
 	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
 		config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
-		is_l2 = 1;
+		is_l2 = true;
 		break;
 	default:
 		return -ERANGE;
 	}
 
+	if (hw->mac.type == e1000_82575) {
+		if (tsync_rx_ctl | tsync_tx_ctl)
+			return -EINVAL;
+		return 0;
+	}
+
 	/* enable/disable TX */
 	regval = rd32(E1000_TSYNCTXCTL);
-	regval = (regval & ~E1000_TSYNCTXCTL_ENABLED) | tsync_tx_ctl_bit;
+	regval &= ~E1000_TSYNCTXCTL_ENABLED;
+	regval |= tsync_tx_ctl;
 	wr32(E1000_TSYNCTXCTL, regval);
 
-	/* enable/disable RX, define which PTP packets are time stamped */
+	/* enable/disable RX */
 	regval = rd32(E1000_TSYNCRXCTL);
-	regval = (regval & ~E1000_TSYNCRXCTL_ENABLED) | tsync_rx_ctl_bit;
-	regval = (regval & ~0xE) | tsync_rx_ctl_type;
+	regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
 	wr32(E1000_TSYNCRXCTL, regval);
+
+	/* define which PTP packets are time stamped */
 	wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
 
-	/*
-	 * Ethertype Filter Queue Filter[0][15:0] = 0x88F7
-	 *                                          (Ethertype to filter on)
-	 * Ethertype Filter Queue Filter[0][26] = 0x1 (Enable filter)
-	 * Ethertype Filter Queue Filter[0][30] = 0x1 (Enable Timestamping)
-	 */
-	wr32(E1000_ETQF0, is_l2 ? 0x440088f7 : 0);
+	/* define ethertype filter for timestamped packets */
+	if (is_l2)
+		wr32(E1000_ETQF(3),
+		                (E1000_ETQF_FILTER_ENABLE | /* enable filter */
+		                 E1000_ETQF_1588 | /* enable timestamping */
+		                 ETH_P_1588));     /* 1588 eth protocol type */
+	else
+		wr32(E1000_ETQF(3), 0);
 
-	/* L4 Queue Filter[0]: only filter by source and destination port */
-	wr32(E1000_SPQF0, htons(port));
-	wr32(E1000_IMIREXT(0), is_l4 ?
-	     ((1<<12) | (1<<19) /* bypass size and control flags */) : 0);
-	wr32(E1000_IMIR(0), is_l4 ?
-	     (htons(port)
-	      | (0<<16) /* immediate interrupt disabled */
-	      | 0 /* (1<<17) bit cleared: do not bypass
-		     destination port check */)
-		: 0);
-	wr32(E1000_FTQF0, is_l4 ?
-	     (0x11 /* UDP */
-	      | (1<<15) /* VF not compared */
-	      | (1<<27) /* Enable Timestamping */
-	      | (7<<28) /* only source port filter enabled,
-			   source/target address and protocol
-			   masked */)
-	     : ((1<<15) | (15<<28) /* all mask bits set = filter not
-				      enabled */));
+#define PTP_PORT 319
+	/* L4 Queue Filter[3]: filter by destination port and protocol */
+	if (is_l4) {
+		u32 ftqf = (IPPROTO_UDP /* UDP */
+			| E1000_FTQF_VF_BP /* VF not compared */
+			| E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
+			| E1000_FTQF_MASK); /* mask all inputs */
+		ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
 
+		wr32(E1000_IMIR(3), htons(PTP_PORT));
+		wr32(E1000_IMIREXT(3),
+		     (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
+		if (hw->mac.type == e1000_82576) {
+			/* enable source port check */
+			wr32(E1000_SPQF(3), htons(PTP_PORT));
+			ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
+		}
+		wr32(E1000_FTQF(3), ftqf);
+	} else {
+		wr32(E1000_FTQF(3), E1000_FTQF_MASK);
+	}
 	wrfl();
 
 	adapter->hwtstamp_config = config;
@@ -5137,21 +5593,15 @@
 		ctrl |= E1000_CTRL_VME;
 		wr32(E1000_CTRL, ctrl);
 
-		/* enable VLAN receive filtering */
+		/* Disable CFI check */
 		rctl = rd32(E1000_RCTL);
 		rctl &= ~E1000_RCTL_CFIEN;
 		wr32(E1000_RCTL, rctl);
-		igb_update_mng_vlan(adapter);
 	} else {
 		/* disable VLAN tag insert/strip */
 		ctrl = rd32(E1000_CTRL);
 		ctrl &= ~E1000_CTRL_VME;
 		wr32(E1000_CTRL, ctrl);
-
-		if (adapter->mng_vlan_id != (u16)IGB_MNG_VLAN_NONE) {
-			igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-			adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
-		}
 	}
 
 	igb_rlpml_set(adapter);
@@ -5166,16 +5616,11 @@
 	struct e1000_hw *hw = &adapter->hw;
 	int pf_id = adapter->vfs_allocated_count;
 
-	if ((hw->mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	    (vid == adapter->mng_vlan_id))
-		return;
+	/* attempt to add filter to vlvf array */
+	igb_vlvf_set(adapter, vid, true, pf_id);
 
-	/* add vid to vlvf if sr-iov is enabled,
-	 * if that fails add directly to filter table */
-	if (igb_vlvf_set(adapter, vid, true, pf_id))
-		igb_vfta_set(hw, vid, true);
-
+	/* add the filter since PF can receive vlans w/o entry in vlvf */
+	igb_vfta_set(hw, vid, true);
 }
 
 static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -5183,6 +5628,7 @@
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	int pf_id = adapter->vfs_allocated_count;
+	s32 err;
 
 	igb_irq_disable(adapter);
 	vlan_group_set_device(adapter->vlgrp, vid, NULL);
@@ -5190,17 +5636,11 @@
 	if (!test_bit(__IGB_DOWN, &adapter->state))
 		igb_irq_enable(adapter);
 
-	if ((adapter->hw.mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	    (vid == adapter->mng_vlan_id)) {
-		/* release control to f/w */
-		igb_release_hw_control(adapter);
-		return;
-	}
+	/* remove vlan from VLVF table array */
+	err = igb_vlvf_set(adapter, vid, false, pf_id);
 
-	/* remove vid from vlvf if sr-iov is enabled,
-	 * if not in vlvf remove from vfta */
-	if (igb_vlvf_set(adapter, vid, false, pf_id))
+	/* if vid was not present in VLVF just remove it from table */
+	if (err)
 		igb_vfta_set(hw, vid, false);
 }
 
@@ -5220,6 +5660,7 @@
 
 int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 
 	mac->autoneg = 0;
@@ -5243,8 +5684,7 @@
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		dev_err(&adapter->pdev->dev,
-			"Unsupported Speed/Duplex configuration\n");
+		dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -5266,9 +5706,7 @@
 	if (netif_running(netdev))
 		igb_close(netdev);
 
-	igb_reset_interrupt_capability(adapter);
-
-	igb_free_queues(adapter);
+	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -5300,7 +5738,7 @@
 		wr32(E1000_CTRL, ctrl);
 
 		/* Allow time for pending master requests to run */
-		igb_disable_pcie_master(&adapter->hw);
+		igb_disable_pcie_master(hw);
 
 		wr32(E1000_WUC, E1000_WUC_PME_EN);
 		wr32(E1000_WUFC, wufc);
@@ -5363,9 +5801,7 @@
 	pci_enable_wake(pdev, PCI_D3hot, 0);
 	pci_enable_wake(pdev, PCI_D3cold, 0);
 
-	igb_set_interrupt_capability(adapter);
-
-	if (igb_alloc_queues(adapter)) {
+	if (igb_init_interrupt_scheme(adapter)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;
 	}
@@ -5417,22 +5853,16 @@
 	int i;
 
 	if (!adapter->msix_entries) {
+		struct igb_q_vector *q_vector = adapter->q_vector[0];
 		igb_irq_disable(adapter);
-		napi_schedule(&adapter->rx_ring[0].napi);
+		napi_schedule(&q_vector->napi);
 		return;
 	}
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *tx_ring = &adapter->tx_ring[i];
-		wr32(E1000_EIMC, tx_ring->eims_value);
-		igb_clean_tx_irq(tx_ring);
-		wr32(E1000_EIMS, tx_ring->eims_value);
-	}
-
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *rx_ring = &adapter->rx_ring[i];
-		wr32(E1000_EIMC, rx_ring->eims_value);
-		napi_schedule(&rx_ring->napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		wr32(E1000_EIMC, q_vector->eims_value);
+		napi_schedule(&q_vector->napi);
 	}
 }
 #endif /* CONFIG_NET_POLL_CONTROLLER */
@@ -5532,6 +5962,33 @@
 	igb_get_hw_control(adapter);
 }
 
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+                             u8 qsel)
+{
+	u32 rar_low, rar_high;
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+	          ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+	/* Indicate to hardware the Address is Valid. */
+	rar_high |= E1000_RAH_AV;
+
+	if (hw->mac.type == e1000_82575)
+		rar_high |= E1000_RAH_POOL_1 * qsel;
+	else
+		rar_high |= E1000_RAH_POOL_1 << qsel;
+
+	wr32(E1000_RAL(index), rar_low);
+	wrfl();
+	wr32(E1000_RAH(index), rar_high);
+	wrfl();
+}
+
 static int igb_set_vf_mac(struct igb_adapter *adapter,
                           int vf, unsigned char *mac_addr)
 {
@@ -5542,8 +5999,7 @@
 
 	memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
 
-	igb_rar_set(hw, mac_addr, rar_entry);
-	igb_set_rah_pool(hw, vf, rar_entry);
+	igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
 
 	return 0;
 }
@@ -5551,19 +6007,29 @@
 static void igb_vmm_control(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 reg_data;
+	u32 reg;
 
-	if (!adapter->vfs_allocated_count)
+	/* replication is not supported for 82575 */
+	if (hw->mac.type == e1000_82575)
 		return;
 
-	/* VF's need PF reset indication before they
-	 * can send/receive mail */
-	reg_data = rd32(E1000_CTRL_EXT);
-	reg_data |= E1000_CTRL_EXT_PFRSTD;
-	wr32(E1000_CTRL_EXT, reg_data);
+	/* enable replication vlan tag stripping */
+	reg = rd32(E1000_RPLOLR);
+	reg |= E1000_RPLOLR_STRVLAN;
+	wr32(E1000_RPLOLR, reg);
 
-	igb_vmdq_set_loopback_pf(hw, true);
-	igb_vmdq_set_replication_pf(hw, true);
+	/* notify HW that the MAC is adding vlan tags */
+	reg = rd32(E1000_DTXCTL);
+	reg |= E1000_DTXCTL_VLAN_ADDED;
+	wr32(E1000_DTXCTL, reg);
+
+	if (adapter->vfs_allocated_count) {
+		igb_vmdq_set_loopback_pf(hw, true);
+		igb_vmdq_set_replication_pf(hw, true);
+	} else {
+		igb_vmdq_set_loopback_pf(hw, false);
+		igb_vmdq_set_replication_pf(hw, false);
+	}
 }
 
 /* igb_main.c */
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index c68265b..8afff07 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -367,16 +367,6 @@
 	return *data;
 }
 
-static int igbvf_get_self_test_count(struct net_device *netdev)
-{
-	return IGBVF_TEST_LEN;
-}
-
-static int igbvf_get_stats_count(struct net_device *netdev)
-{
-	return IGBVF_GLOBAL_STATS_LEN;
-}
-
 static void igbvf_diag_test(struct net_device *netdev,
                             struct ethtool_test *eth_test, u64 *data)
 {
@@ -484,6 +474,18 @@
 
 }
 
+static int igbvf_get_sset_count(struct net_device *dev, int stringset)
+{
+	switch(stringset) {
+	case ETH_SS_TEST:
+		return IGBVF_TEST_LEN;
+	case ETH_SS_STATS:
+		return IGBVF_GLOBAL_STATS_LEN;
+	default:
+		return -EINVAL;
+	}
+}
+
 static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
                               u8 *data)
 {
@@ -532,11 +534,10 @@
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= igbvf_set_tso,
 	.self_test		= igbvf_diag_test,
+	.get_sset_count		= igbvf_get_sset_count,
 	.get_strings		= igbvf_get_strings,
 	.phys_id		= igbvf_phys_id,
 	.get_ethtool_stats	= igbvf_get_ethtool_stats,
-	.self_test_count	= igbvf_get_self_test_count,
-	.get_stats_count	= igbvf_get_stats_count,
 	.get_coalesce		= igbvf_get_coalesce,
 	.set_coalesce		= igbvf_set_coalesce,
 };
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index 8e9b67e..3d1ee7a 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -117,6 +117,7 @@
 			unsigned long time_stamp;
 			u16 length;
 			u16 next_to_watch;
+			u16 mapped_as_page;
 		};
 		/* Rx */
 		struct {
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 91024a3..a127620 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -170,18 +170,12 @@
 		}
 
 		if (!buffer_info->skb) {
-			skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
 				goto no_buffers;
 			}
 
-			/* Make buffer alignment 2 beyond a 16 byte boundary
-			 * this will result in a 16 byte aligned IP header after
-			 * the 14 byte MAC header is removed
-			 */
-			skb_reserve(skb, NET_IP_ALIGN);
-
 			buffer_info->skb = skb;
 			buffer_info->dma = pci_map_single(pdev, skb->data,
 			                                  bufsz,
@@ -372,10 +366,20 @@
 static void igbvf_put_txbuf(struct igbvf_adapter *adapter,
                             struct igbvf_buffer *buffer_info)
 {
-	buffer_info->dma = 0;
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev,
+				       buffer_info->dma,
+				       buffer_info->length,
+				       PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev,
+					 buffer_info->dma,
+					 buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
+	}
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
@@ -823,8 +827,8 @@
 		adapter->detect_tx_hung = false;
 		if (tx_ring->buffer_info[i].time_stamp &&
 		    time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
-		               (adapter->tx_timeout_factor * HZ))
-		    && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+		               (adapter->tx_timeout_factor * HZ)) &&
+		    !(er32(STATUS) & E1000_STATUS_TXOFF)) {
 
 			tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
 			/* detected Tx unit hang */
@@ -1049,7 +1053,7 @@
 	}
 
 	err = request_irq(adapter->msix_entries[vector].vector,
-	                  &igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
+	                  igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
 	                  netdev);
 	if (err)
 		goto out;
@@ -1059,7 +1063,7 @@
 	vector++;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
-	                  &igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
+	                  igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
 	                  netdev);
 	if (err)
 		goto out;
@@ -1069,7 +1073,7 @@
 	vector++;
 
 	err = request_irq(adapter->msix_entries[vector].vector,
-	                  &igbvf_msix_other, 0, netdev->name, netdev);
+	                  igbvf_msix_other, 0, netdev->name, netdev);
 	if (err)
 		goto out;
 
@@ -2094,27 +2098,24 @@
                                    unsigned int first)
 {
 	struct igbvf_buffer *buffer_info;
+	struct pci_dev *pdev = adapter->pdev;
 	unsigned int len = skb_headlen(skb);
 	unsigned int count = 0, i;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-
 	buffer_info = &tx_ring->buffer_info[i];
 	BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
 	buffer_info->length = len;
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
-	buffer_info->dma = skb_shinfo(skb)->dma_head;
+	buffer_info->dma = pci_map_single(pdev, skb->data, len,
+					  PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(pdev, buffer_info->dma))
+		goto dma_error;
+
 
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
 		struct skb_frag_struct *frag;
@@ -2131,14 +2132,44 @@
 		buffer_info->length = len;
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
-		buffer_info->dma = map[count];
+		buffer_info->mapped_as_page = true;
+		buffer_info->dma = pci_map_page(pdev,
+						frag->page,
+						frag->page_offset,
+						len,
+						PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma))
+			goto dma_error;
 		count++;
 	}
 
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count + 1;
+	return ++count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+
+	/* clear timestamp and dma mappings for failed buffer_info mapping */
+	buffer_info->dma = 0;
+	buffer_info->time_stamp = 0;
+	buffer_info->length = 0;
+	buffer_info->next_to_watch = 0;
+	buffer_info->mapped_as_page = false;
+	count--;
+
+	/* clear timestamp and dma mappings for remaining portion of packet */
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		buffer_info = &tx_ring->buffer_info[i];
+		igbvf_put_txbuf(adapter, buffer_info);
+	}
+
+	return 0;
 }
 
 static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 9f7b5d4..ba8d246 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -738,17 +738,12 @@
 
 	IPG_DEBUG_MSG("_get_rxbuff\n");
 
-	skb = netdev_alloc_skb(dev, sp->rxsupport_size + NET_IP_ALIGN);
+	skb = netdev_alloc_skb_ip_align(dev, sp->rxsupport_size);
 	if (!skb) {
 		sp->rx_buff[entry] = NULL;
 		return -ENOMEM;
 	}
 
-	/* Adjust the data start location within the buffer to
-	 * align IP address field to a 16 byte boundary.
-	 */
-	skb_reserve(skb, NET_IP_ALIGN);
-
 	/* Associate the receive buffer with the IPG NIC. */
 	skb->dev = dev;
 
@@ -1756,7 +1751,7 @@
 	/* Register the interrupt line to be used by the IPG within
 	 * the Linux system.
 	 */
-	rc = request_irq(pdev->irq, &ipg_interrupt_handler, IRQF_SHARED,
+	rc = request_irq(pdev->irq, ipg_interrupt_handler, IRQF_SHARED,
 			 dev->name, dev);
 	if (rc < 0) {
 		printk(KERN_INFO "%s: Error when requesting interrupt.\n",
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index eb42468..9b2eebd 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -353,13 +353,13 @@
 		return retval;
 	}
 
-	if ((retval = request_irq(AU1000_IRDA_TX_INT, &au1k_irda_interrupt, 
+	if ((retval = request_irq(AU1000_IRDA_TX_INT, au1k_irda_interrupt, 
 					0, dev->name, dev))) {
 		printk(KERN_ERR "%s: unable to get IRQ %d\n", 
 				dev->name, dev->irq);
 		return retval;
 	}
-	if ((retval = request_irq(AU1000_IRDA_RX_INT, &au1k_irda_interrupt, 
+	if ((retval = request_irq(AU1000_IRDA_RX_INT, au1k_irda_interrupt, 
 					0, dev->name, dev))) {
 		free_irq(AU1000_IRDA_TX_INT, dev);
 		printk(KERN_ERR "%s: unable to get IRQ %d\n", 
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 215adf6..e8e33bb 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -852,7 +852,7 @@
 		 * hot unplug of the dongle...
 		 * Lowest effective timer is 10ms...
 		 * Jean II */
-		self->rx_defer_timer.function = &irda_usb_rx_defer_expired;
+		self->rx_defer_timer.function = irda_usb_rx_defer_expired;
 		self->rx_defer_timer.data = (unsigned long) urb;
 		mod_timer(&self->rx_defer_timer, jiffies + (10 * HZ / 1000));
 		return;
@@ -1124,11 +1124,11 @@
                  * The actual image starts after the "STMP" keyword
                  * so forward to the firmware header tag
                  */
-                for (i = 0; (fw->data[i] != STIR421X_PATCH_END_OF_HDR_TAG)
-			     && (i < fw->size); i++) ;
+                for (i = 0; (fw->data[i] != STIR421X_PATCH_END_OF_HDR_TAG) &&
+			     (i < fw->size); i++) ;
                 /* here we check for the out of buffer case */
-                if ((STIR421X_PATCH_END_OF_HDR_TAG == fw->data[i])
-                    && (i < STIR421X_PATCH_CODE_OFFSET)) {
+                if ((STIR421X_PATCH_END_OF_HDR_TAG == fw->data[i]) &&
+                    (i < STIR421X_PATCH_CODE_OFFSET)) {
                         if (!memcmp(fw->data + i + 1, STIR421X_PATCH_STMP_TAG,
                                     sizeof(STIR421X_PATCH_STMP_TAG) - 1)) {
 
diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c
index 528767d..e5698fa 100644
--- a/drivers/net/irda/stir4200.c
+++ b/drivers/net/irda/stir4200.c
@@ -612,16 +612,16 @@
 		pr_debug("fifo status 0x%lx count %lu\n", status, count);
 
 		/* is fifo receiving already, or empty */
-		if (!(status & FIFOCTL_DIR)
-		    || (status & FIFOCTL_EMPTY))
+		if (!(status & FIFOCTL_DIR) ||
+		    (status & FIFOCTL_EMPTY))
 			return 0;
 
 		if (signal_pending(current))
 			return -EINTR;
 
 		/* shutting down? */
-		if (!netif_running(stir->netdev)
-		    || !netif_device_present(stir->netdev))
+		if (!netif_running(stir->netdev) ||
+		    !netif_device_present(stir->netdev))
 			return -ESHUTDOWN;
 
 		/* only waiting for some space */
@@ -776,8 +776,8 @@
 		}
 
 		/* nothing to send? start receiving */
-		if (!stir->receiving 
-		    && irda_device_txqueue_empty(dev)) {
+		if (!stir->receiving &&
+		    irda_device_txqueue_empty(dev)) {
 			/* Wait otherwise chip gets confused. */
 			if (fifo_txwait(stir, -1))
 				break;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index a5ca71c..fddb4ef 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -1185,8 +1185,8 @@
 		 * if frame size,data ptr,or skb ptr are wrong ,the get next
 		 * entry.
 		 */
-		if ((skb == NULL) || (skb->data == NULL)
-		    || (self->rx_buff.data == NULL) || (len < 6)) {
+		if ((skb == NULL) || (skb->data == NULL) ||
+		    (self->rx_buff.data == NULL) || (len < 6)) {
 			self->netdev->stats.rx_dropped++;
 			return TRUE;
 		}
@@ -1284,8 +1284,8 @@
 		self->RetryCount++;
 
 	if ((self->RetryCount >= 1) ||
-	    ((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize)
-	    || (st_fifo->len >= (MAX_RX_WINDOW))) {
+	    ((st_fifo->pending_bytes + 2048) > self->rx_buff.truesize) ||
+	    (st_fifo->len >= (MAX_RX_WINDOW))) {
 		while (st_fifo->len > 0) {	//upload frame
 			// Put this entry back in fifo 
 			if (st_fifo->head > MAX_RX_WINDOW)
@@ -1300,8 +1300,8 @@
 			 * if frame size, data ptr, or skb ptr are wrong,
 			 * then get next entry.
 			 */
-			if ((skb == NULL) || (skb->data == NULL)
-			    || (self->rx_buff.data == NULL) || (len < 6)) {
+			if ((skb == NULL) || (skb->data == NULL) ||
+			    (self->rx_buff.data == NULL) || (len < 6)) {
 				self->netdev->stats.rx_dropped++;
 				continue;
 			}
@@ -1332,8 +1332,8 @@
 		 * if frame is receive complete at this routine ,then upload
 		 * frame.
 		 */
-		if ((GetRXStatus(iobase) & 0x10)
-		    && (RxCurCount(iobase, self) != self->RxLastCount)) {
+		if ((GetRXStatus(iobase) & 0x10) &&
+		    (RxCurCount(iobase, self) != self->RxLastCount)) {
 			upload_rxdata(self, iobase);
 			if (irda_device_txqueue_empty(self->netdev))
 				via_ircc_dma_receive(self);
diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c
index 7cfb8b6..bd3c6b5 100644
--- a/drivers/net/irda/vlsi_ir.c
+++ b/drivers/net/irda/vlsi_ir.c
@@ -431,8 +431,8 @@
 		memset(rd, 0, sizeof(*rd));
 		rd->hw = hwmap + i;
 		rd->buf = kmalloc(len, GFP_KERNEL|GFP_DMA);
-		if (rd->buf == NULL
-		    ||  !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
+		if (rd->buf == NULL ||
+		    !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) {
 			if (rd->buf) {
 				IRDA_ERROR("%s: failed to create PCI-MAP for %p",
 					   __func__, rd->buf);
@@ -955,8 +955,8 @@
 		}
 		for(;;) {
 			do_gettimeofday(&now);
-			if (now.tv_sec > ready.tv_sec
-			    ||  (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec))
+			if (now.tv_sec > ready.tv_sec ||
+			    (now.tv_sec==ready.tv_sec && now.tv_usec>=ready.tv_usec))
 			    	break;
 			udelay(100);
 			/* must not sleep here - called under netif_tx_lock! */
@@ -1594,8 +1594,8 @@
 	 * see include file for details why we need these 2 masks, in this order!
 	 */
 
-	if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW)
-	    || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
+	if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW) ||
+	    pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) {
 		IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__);
 		return -1;
 	}
@@ -1641,8 +1641,8 @@
 	IRDA_MESSAGE("%s: IrDA PCI controller %s detected\n",
 		     drivername, pci_name(pdev));
 
-	if ( !pci_resource_start(pdev,0)
-	     || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
+	if ( !pci_resource_start(pdev,0) ||
+	     !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) {
 		IRDA_ERROR("%s: bar 0 invalid", __func__);
 		goto out_disable;
 	}
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
index 9706e64..04d0502 100644
--- a/drivers/net/isa-skeleton.c
+++ b/drivers/net/isa-skeleton.c
@@ -214,9 +214,9 @@
 	 * contains the manufacturer's unique code. That might be a good probe
 	 * method. Ideally you would add additional checks.
 	 */
-	if (inb(ioaddr + 0) != SA_ADDR0
-		||	 inb(ioaddr + 1) != SA_ADDR1
-		||	 inb(ioaddr + 2) != SA_ADDR2)
+	if (inb(ioaddr + 0) != SA_ADDR0 ||
+	    inb(ioaddr + 1) != SA_ADDR1 ||
+	    inb(ioaddr + 2) != SA_ADDR2)
 		goto out;
 
 	if (net_debug  &&  version_printed++ == 0)
@@ -260,7 +260,7 @@
 		dev->irq = 9;
 
 	{
-		int irqval = request_irq(dev->irq, &net_interrupt, 0, cardname, dev);
+		int irqval = request_irq(dev->irq, net_interrupt, 0, cardname, dev);
 		if (irqval) {
 			printk("%s: unable to get IRQ %d (irqval=%d).\n",
 				   dev->name, dev->irq, irqval);
@@ -378,7 +378,7 @@
 	 * This is used if the interrupt line can turned off (shared).
 	 * See 3c503.c for an example of selecting the IRQ at config-time.
 	 */
-	if (request_irq(dev->irq, &net_interrupt, 0, cardname, dev)) {
+	if (request_irq(dev->irq, net_interrupt, 0, cardname, dev)) {
 		return -EAGAIN;
 	}
 	/*
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index aa7286b..4999719 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -604,10 +604,10 @@
 	/* Convert timer to jiffies */
 	cnx->ack_timeout = remote_caps->ack_timeout * HZ / 1000000;
 
-	if ( (remote_caps->num_buffers == 0)
-	     || (remote_caps->ack_threshold > VETH_MAX_ACKS_PER_MSG)
-	     || (remote_caps->ack_threshold == 0)
-	     || (cnx->ack_timeout == 0) ) {
+	if ( (remote_caps->num_buffers == 0) ||
+	     (remote_caps->ack_threshold > VETH_MAX_ACKS_PER_MSG) ||
+	     (remote_caps->ack_threshold == 0) ||
+	     (cnx->ack_timeout == 0) ) {
 		veth_error("Received incompatible capabilities from LPAR %d.\n",
 				cnx->remote_lp);
 		return HvLpEvent_Rc_InvalidSubtypeData;
@@ -714,8 +714,8 @@
 		cnx->state |= VETH_STATE_OPEN;
 	}
 
-	if ( (cnx->state & VETH_STATE_OPEN)
-	     && !(cnx->state & VETH_STATE_SENTMON) ) {
+	if ( (cnx->state & VETH_STATE_OPEN) &&
+	     !(cnx->state & VETH_STATE_SENTMON) ) {
 		rc = veth_signalevent(cnx, VETH_EVENT_MONITOR,
 				      HvLpEvent_AckInd_DoAck,
 				      HvLpEvent_AckType_DeferredAck,
@@ -724,8 +724,8 @@
 		if (rc == HvLpEvent_Rc_Good) {
 			cnx->state |= VETH_STATE_SENTMON;
 		} else {
-			if ( (rc != HvLpEvent_Rc_PartitionDead)
-			     && (rc != HvLpEvent_Rc_PathClosed) )
+			if ( (rc != HvLpEvent_Rc_PartitionDead) &&
+			     (rc != HvLpEvent_Rc_PathClosed) )
 				veth_error("Error sending monitor to LPAR %d, "
 						"rc = %d\n", rlp, rc);
 
@@ -735,8 +735,8 @@
 		}
 	}
 
-	if ( (cnx->state & VETH_STATE_OPEN)
-	     && !(cnx->state & VETH_STATE_SENTCAPS)) {
+	if ( (cnx->state & VETH_STATE_OPEN) &&
+	     !(cnx->state & VETH_STATE_SENTCAPS)) {
 		u64 *rawcap = (u64 *)&cnx->local_caps;
 
 		rc = veth_signalevent(cnx, VETH_EVENT_CAP,
@@ -748,8 +748,8 @@
 		if (rc == HvLpEvent_Rc_Good) {
 			cnx->state |= VETH_STATE_SENTCAPS;
 		} else {
-			if ( (rc != HvLpEvent_Rc_PartitionDead)
-			     && (rc != HvLpEvent_Rc_PathClosed) )
+			if ( (rc != HvLpEvent_Rc_PartitionDead) &&
+			     (rc != HvLpEvent_Rc_PathClosed) )
 				veth_error("Error sending caps to LPAR %d, "
 						"rc = %d\n", rlp, rc);
 
@@ -759,8 +759,8 @@
 		}
 	}
 
-	if ((cnx->state & VETH_STATE_GOTCAPS)
-	    && !(cnx->state & VETH_STATE_SENTCAPACK)) {
+	if ((cnx->state & VETH_STATE_GOTCAPS) &&
+	    !(cnx->state & VETH_STATE_SENTCAPACK)) {
 		struct veth_cap_data *remote_caps = &cnx->remote_caps;
 
 		memcpy(remote_caps, &cnx->cap_event.u.caps_data,
@@ -783,9 +783,9 @@
 			goto cant_cope;
 	}
 
-	if ((cnx->state & VETH_STATE_GOTCAPACK)
-	    && (cnx->state & VETH_STATE_GOTCAPS)
-	    && !(cnx->state & VETH_STATE_READY)) {
+	if ((cnx->state & VETH_STATE_GOTCAPACK) &&
+	    (cnx->state & VETH_STATE_GOTCAPS) &&
+	    !(cnx->state & VETH_STATE_READY)) {
 		if (cnx->cap_ack_event.base_event.xRc == HvLpEvent_Rc_Good) {
 			/* Start the ACK timer */
 			cnx->ack_timer.expires = jiffies + cnx->ack_timeout;
@@ -818,8 +818,8 @@
 	struct veth_msg *msgs;
 	int i;
 
-	if ( (rlp == this_lp)
-	     || ! HvLpConfig_doLpsCommunicateOnVirtualLan(this_lp, rlp) )
+	if ( (rlp == this_lp) ||
+	     ! HvLpConfig_doLpsCommunicateOnVirtualLan(this_lp, rlp) )
 		return 0;
 
 	cnx = kzalloc(sizeof(*cnx), GFP_KERNEL);
@@ -1538,8 +1538,8 @@
 	cnx->pending_acks[cnx->num_pending_acks++] =
 		event->base_event.xCorrelationToken;
 
-	if ( (cnx->num_pending_acks >= cnx->remote_caps.ack_threshold)
-	     || (cnx->num_pending_acks >= VETH_MAX_ACKS_PER_MSG) )
+	if ( (cnx->num_pending_acks >= cnx->remote_caps.ack_threshold) ||
+	     (cnx->num_pending_acks >= VETH_MAX_ACKS_PER_MSG) )
 		veth_flush_acks(cnx);
 
 	spin_unlock_irqrestore(&cnx->lock, flags);
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index d85717e..5257ae0 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -117,6 +117,7 @@
 	unsigned long time_stamp;
 	u16 length;
 	u16 next_to_watch;
+	u16 mapped_as_page;
 };
 
 struct ixgb_desc_ring {
@@ -183,7 +184,6 @@
 	struct napi_struct napi;
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in ixgb_hw.h */
 	struct ixgb_hw hw;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 288ee1d..a4ed96c 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -34,38 +34,46 @@
 
 #define IXGB_ALL_RAR_ENTRIES 16
 
+enum {NETDEV_STATS, IXGB_STATS};
+
 struct ixgb_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define IXGB_STAT(m) FIELD_SIZEOF(struct ixgb_adapter, m), \
-		      offsetof(struct ixgb_adapter, m)
-static struct ixgb_stats ixgb_gstrings_stats[] = {
-	{"rx_packets", IXGB_STAT(net_stats.rx_packets)},
-	{"tx_packets", IXGB_STAT(net_stats.tx_packets)},
-	{"rx_bytes", IXGB_STAT(net_stats.rx_bytes)},
-	{"tx_bytes", IXGB_STAT(net_stats.tx_bytes)},
-	{"rx_errors", IXGB_STAT(net_stats.rx_errors)},
-	{"tx_errors", IXGB_STAT(net_stats.tx_errors)},
-	{"rx_dropped", IXGB_STAT(net_stats.rx_dropped)},
-	{"tx_dropped", IXGB_STAT(net_stats.tx_dropped)},
-	{"multicast", IXGB_STAT(net_stats.multicast)},
-	{"collisions", IXGB_STAT(net_stats.collisions)},
+#define IXGB_STAT(m)		IXGB_STATS, \
+				FIELD_SIZEOF(struct ixgb_adapter, m), \
+				offsetof(struct ixgb_adapter, m)
+#define IXGB_NETDEV_STAT(m)	NETDEV_STATS, \
+				FIELD_SIZEOF(struct net_device, m), \
+				offsetof(struct net_device, m)
 
-/*	{ "rx_length_errors", IXGB_STAT(net_stats.rx_length_errors) },	*/
-	{"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)},
-	{"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)},
-	{"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)},
+static struct ixgb_stats ixgb_gstrings_stats[] = {
+	{"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)},
+	{"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)},
+	{"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)},
+	{"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)},
+	{"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)},
+	{"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)},
+	{"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)},
+	{"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)},
+	{"multicast", IXGB_NETDEV_STAT(stats.multicast)},
+	{"collisions", IXGB_NETDEV_STAT(stats.collisions)},
+
+/*	{ "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) },	*/
+	{"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)},
+	{"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)},
+	{"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)},
 	{"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
-	{"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)},
-	{"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)},
-	{"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)},
-	{"tx_carrier_errors", IXGB_STAT(net_stats.tx_carrier_errors)},
-	{"tx_fifo_errors", IXGB_STAT(net_stats.tx_fifo_errors)},
-	{"tx_heartbeat_errors", IXGB_STAT(net_stats.tx_heartbeat_errors)},
-	{"tx_window_errors", IXGB_STAT(net_stats.tx_window_errors)},
+	{"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)},
+	{"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)},
+	{"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)},
+	{"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)},
+	{"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)},
+	{"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)},
+	{"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)},
 	{"tx_deferred_ok", IXGB_STAT(stats.dc)},
 	{"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
 	{"tx_restart_queue", IXGB_STAT(restart_queue) },
@@ -662,10 +670,21 @@
 {
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	ixgb_update_stats(adapter);
 	for (i = 0; i < IXGB_STATS_LEN; i++) {
-		char *p = (char *)adapter+ixgb_gstrings_stats[i].stat_offset;
+		switch (ixgb_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					ixgb_gstrings_stats[i].stat_offset;
+			break;
+		case IXGB_STATS:
+			p = (char *) adapter +
+					ixgb_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 8aa44dc..bcd0f01 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -233,7 +233,7 @@
 		/* proceed to try to request regular interrupt */
 	}
 
-	err = request_irq(adapter->pdev->irq, &ixgb_intr, irq_flags,
+	err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags,
 	                  netdev->name, netdev);
 	if (err) {
 		if (adapter->have_msi)
@@ -892,10 +892,18 @@
 ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter,
                                 struct ixgb_buffer *buffer_info)
 {
-	buffer_info->dma = 0;
+	if (buffer_info->dma) {
+		if (buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev, buffer_info->dma,
+				       buffer_info->length, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev, buffer_info->dma,
+					 buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		buffer_info->dma = 0;
+	}
+
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
 	}
@@ -1272,24 +1280,16 @@
 	    unsigned int first)
 {
 	struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+	struct pci_dev *pdev = adapter->pdev;
 	struct ixgb_buffer *buffer_info;
 	int len = skb_headlen(skb);
 	unsigned int offset = 0, size, count = 0, i;
 	unsigned int mss = skb_shinfo(skb)->gso_size;
-
 	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-
 	while (len) {
 		buffer_info = &tx_ring->buffer_info[i];
 		size = min(len, IXGB_MAX_DATA_PER_TXD);
@@ -1301,11 +1301,11 @@
 		buffer_info->length = size;
 		WARN_ON(buffer_info->dma != 0);
 		buffer_info->time_stamp = jiffies;
-		buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
-			pci_map_single(adapter->pdev,
-				skb->data + offset,
-				size,
-				PCI_DMA_TODEVICE);
+		buffer_info->mapped_as_page = false;
+		buffer_info->dma = pci_map_single(pdev, skb->data + offset,
+						  size, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, buffer_info->dma))
+			goto dma_error;
 		buffer_info->next_to_watch = 0;
 
 		len -= size;
@@ -1323,7 +1323,7 @@
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = frag->size;
-		offset = 0;
+		offset = frag->page_offset;
 
 		while (len) {
 			i++;
@@ -1341,7 +1341,13 @@
 
 			buffer_info->length = size;
 			buffer_info->time_stamp = jiffies;
-			buffer_info->dma = map[f] + offset;
+			buffer_info->mapped_as_page = true;
+			buffer_info->dma =
+				pci_map_page(pdev, frag->page,
+					     offset, size,
+					     PCI_DMA_TODEVICE);
+			if (pci_dma_mapping_error(pdev, buffer_info->dma))
+				goto dma_error;
 			buffer_info->next_to_watch = 0;
 
 			len -= size;
@@ -1353,6 +1359,22 @@
 	tx_ring->buffer_info[first].next_to_watch = i;
 
 	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+	buffer_info->dma = 0;
+	count--;
+
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		buffer_info = &tx_ring->buffer_info[i];
+		ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+	}
+
+	return 0;
 }
 
 static void
@@ -1537,9 +1559,7 @@
 static struct net_device_stats *
 ixgb_get_stats(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev_priv(netdev);
-
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -1676,16 +1696,16 @@
 
 	/* Fill out the OS statistics structure */
 
-	adapter->net_stats.rx_packets = adapter->stats.gprcl;
-	adapter->net_stats.tx_packets = adapter->stats.gptcl;
-	adapter->net_stats.rx_bytes = adapter->stats.gorcl;
-	adapter->net_stats.tx_bytes = adapter->stats.gotcl;
-	adapter->net_stats.multicast = adapter->stats.mprcl;
-	adapter->net_stats.collisions = 0;
+	netdev->stats.rx_packets = adapter->stats.gprcl;
+	netdev->stats.tx_packets = adapter->stats.gptcl;
+	netdev->stats.rx_bytes = adapter->stats.gorcl;
+	netdev->stats.tx_bytes = adapter->stats.gotcl;
+	netdev->stats.multicast = adapter->stats.mprcl;
+	netdev->stats.collisions = 0;
 
 	/* ignore RLEC as it reports errors for padded (<64bytes) frames
 	 * with a length in the type/len field */
-	adapter->net_stats.rx_errors =
+	netdev->stats.rx_errors =
 	    /* adapter->stats.rnbc + */ adapter->stats.crcerrs +
 	    adapter->stats.ruc +
 	    adapter->stats.roc /*+ adapter->stats.rlec */  +
@@ -1693,21 +1713,21 @@
 	    adapter->stats.ecbc + adapter->stats.mpc;
 
 	/* see above
-	 * adapter->net_stats.rx_length_errors = adapter->stats.rlec;
+	 * netdev->stats.rx_length_errors = adapter->stats.rlec;
 	 */
 
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
-	adapter->net_stats.rx_over_errors = adapter->stats.mpc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_fifo_errors = adapter->stats.mpc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_over_errors = adapter->stats.mpc;
 
-	adapter->net_stats.tx_errors = 0;
-	adapter->net_stats.rx_frame_errors = 0;
-	adapter->net_stats.tx_aborted_errors = 0;
-	adapter->net_stats.tx_carrier_errors = 0;
-	adapter->net_stats.tx_fifo_errors = 0;
-	adapter->net_stats.tx_heartbeat_errors = 0;
-	adapter->net_stats.tx_window_errors = 0;
+	netdev->stats.tx_errors = 0;
+	netdev->stats.rx_frame_errors = 0;
+	netdev->stats.tx_aborted_errors = 0;
+	netdev->stats.tx_carrier_errors = 0;
+	netdev->stats.tx_fifo_errors = 0;
+	netdev->stats.tx_heartbeat_errors = 0;
+	netdev->stats.tx_window_errors = 0;
 }
 
 #define IXGB_MAX_INTR 10
@@ -1974,9 +1994,8 @@
 		 * of reassembly being done in the stack */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -2059,20 +2078,13 @@
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, adapter->rx_buffer_len
-			               + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 map_skb:
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 385be60..8da8eb5 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -51,11 +51,11 @@
 		__func__ , ## args)))
 
 /* TX/RX descriptor defines */
-#define IXGBE_DEFAULT_TXD		   1024
+#define IXGBE_DEFAULT_TXD		    512
 #define IXGBE_MAX_TXD			   4096
 #define IXGBE_MIN_TXD			     64
 
-#define IXGBE_DEFAULT_RXD		   1024
+#define IXGBE_DEFAULT_RXD		    512
 #define IXGBE_MAX_RXD			   4096
 #define IXGBE_MIN_RXD			     64
 
@@ -106,6 +106,7 @@
 	unsigned long time_stamp;
 	u16 length;
 	u16 next_to_watch;
+	u16 mapped_as_page;
 };
 
 struct ixgbe_rx_buffer {
@@ -159,10 +160,13 @@
 	struct ixgbe_queue_stats stats;
 	unsigned long reinit_state;
 	u64 rsc_count;			/* stat for coalesced packets */
+	u64 rsc_flush;			/* stats for flushed packets */
+	u32 restart_queue;		/* track tx queue restarts */
+	u32 non_eop_descs;		/* track hardware descriptor chaining */
 
 	unsigned int size;		/* length in bytes */
 	dma_addr_t dma;			/* phys. address of descriptor ring */
-};
+} ____cacheline_internodealigned_in_smp;
 
 enum ixgbe_ring_f_enum {
 	RING_F_NONE = 0,
@@ -187,7 +191,7 @@
 struct ixgbe_ring_feature {
 	int indices;
 	int mask;
-};
+} ____cacheline_internodealigned_in_smp;
 
 #define MAX_RX_QUEUES 128
 #define MAX_TX_QUEUES 128
@@ -273,29 +277,25 @@
 	u16 eitr_high;
 
 	/* TX */
-	struct ixgbe_ring *tx_ring;	/* One per active queue */
+	struct ixgbe_ring *tx_ring ____cacheline_aligned_in_smp; /* One per active queue */
 	int num_tx_queues;
-	u64 restart_queue;
-	u64 hw_csum_tx_good;
-	u64 lsc_int;
-	u64 hw_tso_ctxt;
-	u64 hw_tso6_ctxt;
 	u32 tx_timeout_count;
 	bool detect_tx_hung;
 
+	u64 restart_queue;
+	u64 lsc_int;
+
 	/* RX */
-	struct ixgbe_ring *rx_ring;	/* One per active queue */
+	struct ixgbe_ring *rx_ring ____cacheline_aligned_in_smp; /* One per active queue */
 	int num_rx_queues;
 	u64 hw_csum_rx_error;
 	u64 hw_rx_no_dma_resources;
-	u64 hw_csum_rx_good;
 	u64 non_eop_descs;
 	int num_msix_vectors;
 	int max_msix_q_vectors;         /* true count of q_vectors for device */
 	struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE];
 	struct msix_entry *msix_entries;
 
-	u64 rx_hdr_split;
 	u32 alloc_rx_page_failed;
 	u32 alloc_rx_buff_failed;
 
@@ -340,7 +340,6 @@
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	u32 test_icr;
 	struct ixgbe_ring test_tx_ring;
@@ -376,7 +375,8 @@
 #ifdef IXGBE_FCOE
 	struct ixgbe_fcoe fcoe;
 #endif /* IXGBE_FCOE */
-	u64 rsc_count;
+	u64 rsc_total_count;
+	u64 rsc_total_flush;
 	u32 wol;
 	u16 eeprom_version;
 };
@@ -397,7 +397,7 @@
 extern struct ixgbe_info ixgbe_82598_info;
 extern struct ixgbe_info ixgbe_82599_info;
 #ifdef CONFIG_IXGBE_DCB
-extern struct dcbnl_rtnl_ops dcbnl_ops;
+extern const struct dcbnl_rtnl_ops dcbnl_ops;
 extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
                               struct ixgbe_dcb_config *dst_dcb_cfg,
                               int tc_max);
@@ -458,6 +458,7 @@
 extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
 extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
 #endif /* CONFIG_IXGBE_DCB */
+extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
 #endif /* IXGBE_FCOE */
 
 #endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 34b0492..7210689 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -42,6 +42,10 @@
                                           ixgbe_link_speed speed,
                                           bool autoneg,
                                           bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+                                           ixgbe_link_speed speed,
+                                           bool autoneg,
+                                           bool autoneg_wait_to_complete);
 s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
                                bool autoneg_wait_to_complete);
 s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
@@ -64,7 +68,13 @@
 		/* Set up dual speed SFP+ support */
 		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
 	} else {
-		mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+		if ((mac->ops.get_media_type(hw) ==
+		     ixgbe_media_type_backplane) &&
+		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+		     hw->phy.smart_speed == ixgbe_smart_speed_on))
+			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+		else
+			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
 	}
 }
 
@@ -337,6 +347,7 @@
 		media_type = ixgbe_media_type_backplane;
 		break;
 	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_SFP_EM:
 		media_type = ixgbe_media_type_fiber;
 		break;
 	case IXGBE_DEV_ID_82599_CX4:
@@ -479,7 +490,12 @@
 			hw->mac.autotry_restart = false;
 		}
 
-		/* The controller may take up to 500ms at 10g to acquire link */
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted.  82599 uses the same timing for 10g SFI.
+		 */
+
 		for (i = 0; i < 5; i++) {
 			/* Wait for the link partner to also set speed */
 			msleep(100);
@@ -567,6 +583,111 @@
 }
 
 /**
+ *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Implements the Intel SmartSpeed algorithm.
+ **/
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed, bool autoneg,
+				     bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	ixgbe_link_speed link_speed;
+	s32 i, j;
+	bool link_up = false;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	hw_dbg(hw, "ixgbe_setup_mac_link_smartspeed.\n");
+
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/*
+	 * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
+	 * autoneg advertisement if link is unable to be established at the
+	 * highest negotiated rate.  This can sometimes happen due to integrity
+	 * issues with the physical media connection.
+	 */
+
+	/* First, try to get link with full advertisement */
+	hw->phy.smart_speed_active = false;
+	for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+		status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+						    autoneg_wait_to_complete);
+		if (status)
+			goto out;
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+		 * Table 9 in the AN MAS.
+		 */
+		for (i = 0; i < 5; i++) {
+			mdelay(100);
+
+			/* If we have link, just jump out */
+			hw->mac.ops.check_link(hw, &link_speed,
+			                       &link_up, false);
+			if (link_up)
+				goto out;
+		}
+	}
+
+	/*
+	 * We didn't get link.  If we advertised KR plus one of KX4/KX
+	 * (or BX4/BX), then disable KR and try again.
+	 */
+	if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+	    ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+		goto out;
+
+	/* Turn SmartSpeed on to disable KR support */
+	hw->phy.smart_speed_active = true;
+	status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+	if (status)
+		goto out;
+
+	/*
+	 * Wait for the controller to acquire link.  600ms will allow for
+	 * the AN link_fail_inhibit_timer as well for multiple cycles of
+	 * parallel detect, both 10g and 1g. This allows for the maximum
+	 * connect attempts as defined in the AN MAS table 73-7.
+	 */
+	for (i = 0; i < 6; i++) {
+		mdelay(100);
+
+		/* If we have link, just jump out */
+		hw->mac.ops.check_link(hw, &link_speed,
+		                       &link_up, false);
+		if (link_up)
+			goto out;
+	}
+
+	/* We didn't get link.  Turn SmartSpeed back off. */
+	hw->phy.smart_speed_active = false;
+	status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+
+out:
+	return status;
+}
+
+/**
  *  ixgbe_check_mac_link_82599 - Determine link and speed status
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
@@ -669,7 +790,8 @@
 		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
 			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
 				autoc |= IXGBE_AUTOC_KX4_SUPP;
-			if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
+			if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+			    (hw->phy.smart_speed_active == false))
 				autoc |= IXGBE_AUTOC_KR_SUPP;
 		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 			autoc |= IXGBE_AUTOC_KX_SUPP;
@@ -878,6 +1000,10 @@
 		hw->mac.num_rar_entries--;
 	}
 
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+	                               &hw->mac.wwpn_prefix);
+
 reset_hw_out:
 	return status;
 }
@@ -2414,6 +2540,51 @@
 	return status;
 }
 
+/**
+ *  ixgbe_get_wwn_prefix_82599 - Get alternative WWNN/WWPN prefix from
+ *  the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+static s32 ixgbe_get_wwn_prefix_82599(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+                                      u16 *wwpn_prefix)
+{
+	u16 offset, caps;
+	u16 alt_san_mac_blk_offset;
+
+	/* clear output first */
+	*wwnn_prefix = 0xFFFF;
+	*wwpn_prefix = 0xFFFF;
+
+	/* check if alternative SAN MAC is supported */
+	hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
+	                    &alt_san_mac_blk_offset);
+
+	if ((alt_san_mac_blk_offset == 0) ||
+	    (alt_san_mac_blk_offset == 0xFFFF))
+		goto wwn_prefix_out;
+
+	/* check capability in alternative san mac address block */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+	hw->eeprom.ops.read(hw, offset, &caps);
+	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+		goto wwn_prefix_out;
+
+	/* get the corresponding prefix for WWNN/WWPN */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+
+wwn_prefix_out:
+	return 0;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -2425,6 +2596,7 @@
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
 	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_82599,
 	.get_device_caps        = &ixgbe_get_device_caps_82599,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 40ff120..688b8ca 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1382,10 +1382,10 @@
 	hw->addr_ctrl.overflow_promisc = 0;
 
 	/* Zero out the other receive addresses */
-	hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use);
-	for (i = 1; i <= uc_addr_in_use; i++) {
-		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+	hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use + 1);
+	for (i = 0; i < uc_addr_in_use; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0);
 	}
 
 	/* Add the new addresses */
@@ -1755,17 +1755,24 @@
 	/*
 	 * On backplane, bail out if
 	 * - backplane autoneg was not completed, or if
-	 * - link partner is not AN enabled
+	 * - we are 82599 and link partner is not AN enabled
 	 */
 	if (hw->phy.media_type == ixgbe_media_type_backplane) {
 		links = IXGBE_READ_REG(hw, IXGBE_LINKS);
-		links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
-		if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) ||
-		    ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) {
+		if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
 			hw->fc.fc_was_autonegged = false;
 			hw->fc.current_mode = hw->fc.requested_mode;
 			goto out;
 		}
+
+		if (hw->mac.type == ixgbe_mac_82599EB) {
+			links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+			if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
+				hw->fc.fc_was_autonegged = false;
+				hw->fc.current_mode = hw->fc.requested_mode;
+				goto out;
+			}
+		}
 	}
 
 	/*
@@ -1784,6 +1791,20 @@
 	}
 
 	/*
+	 * Bail out on
+	 * - copper or CX4 adapters
+	 * - fiber adapters running at 10gig
+	 */
+	if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+	     (hw->phy.media_type == ixgbe_media_type_cx4) ||
+	     ((hw->phy.media_type == ixgbe_media_type_fiber) &&
+	     (speed == IXGBE_LINK_SPEED_10GB_FULL))) {
+		hw->fc.fc_was_autonegged = false;
+		hw->fc.current_mode = hw->fc.requested_mode;
+		goto out;
+	}
+
+	/*
 	 * Read the AN advertisement and LP ability registers and resolve
 	 * local flow control settings accordingly
 	 */
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index a6bc1ef..3c7a79a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -563,7 +563,7 @@
 	return rval;
 }
 
-struct dcbnl_rtnl_ops dcbnl_ops = {
+const struct dcbnl_rtnl_ops dcbnl_ops = {
 	.getstate	= ixgbe_dcbnl_get_state,
 	.setstate	= ixgbe_dcbnl_set_state,
 	.getpermhwaddr	= ixgbe_dcbnl_get_perm_hw_addr,
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 856c18c..06a9d18 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -40,19 +40,27 @@
 
 #define IXGBE_ALL_RAR_ENTRIES 16
 
+enum {NETDEV_STATS, IXGBE_STATS};
+
 struct ixgbe_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define IXGBE_STAT(m) sizeof(((struct ixgbe_adapter *)0)->m), \
-                             offsetof(struct ixgbe_adapter, m)
+#define IXGBE_STAT(m)		IXGBE_STATS, \
+				sizeof(((struct ixgbe_adapter *)0)->m), \
+				offsetof(struct ixgbe_adapter, m)
+#define IXGBE_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static struct ixgbe_stats ixgbe_gstrings_stats[] = {
-	{"rx_packets", IXGBE_STAT(net_stats.rx_packets)},
-	{"tx_packets", IXGBE_STAT(net_stats.tx_packets)},
-	{"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)},
-	{"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)},
+	{"rx_packets", IXGBE_NETDEV_STAT(stats.rx_packets)},
+	{"tx_packets", IXGBE_NETDEV_STAT(stats.tx_packets)},
+	{"rx_bytes", IXGBE_NETDEV_STAT(stats.rx_bytes)},
+	{"tx_bytes", IXGBE_NETDEV_STAT(stats.tx_bytes)},
 	{"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
 	{"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
 	{"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
@@ -60,40 +68,36 @@
 	{"lsc_int", IXGBE_STAT(lsc_int)},
 	{"tx_busy", IXGBE_STAT(tx_busy)},
 	{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
-	{"rx_errors", IXGBE_STAT(net_stats.rx_errors)},
-	{"tx_errors", IXGBE_STAT(net_stats.tx_errors)},
-	{"rx_dropped", IXGBE_STAT(net_stats.rx_dropped)},
-	{"tx_dropped", IXGBE_STAT(net_stats.tx_dropped)},
-	{"multicast", IXGBE_STAT(net_stats.multicast)},
+	{"rx_errors", IXGBE_NETDEV_STAT(stats.rx_errors)},
+	{"tx_errors", IXGBE_NETDEV_STAT(stats.tx_errors)},
+	{"rx_dropped", IXGBE_NETDEV_STAT(stats.rx_dropped)},
+	{"tx_dropped", IXGBE_NETDEV_STAT(stats.tx_dropped)},
+	{"multicast", IXGBE_NETDEV_STAT(stats.multicast)},
 	{"broadcast", IXGBE_STAT(stats.bprc)},
 	{"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) },
-	{"collisions", IXGBE_STAT(net_stats.collisions)},
-	{"rx_over_errors", IXGBE_STAT(net_stats.rx_over_errors)},
-	{"rx_crc_errors", IXGBE_STAT(net_stats.rx_crc_errors)},
-	{"rx_frame_errors", IXGBE_STAT(net_stats.rx_frame_errors)},
-	{"hw_rsc_count", IXGBE_STAT(rsc_count)},
+	{"collisions", IXGBE_NETDEV_STAT(stats.collisions)},
+	{"rx_over_errors", IXGBE_NETDEV_STAT(stats.rx_over_errors)},
+	{"rx_crc_errors", IXGBE_NETDEV_STAT(stats.rx_crc_errors)},
+	{"rx_frame_errors", IXGBE_NETDEV_STAT(stats.rx_frame_errors)},
+	{"hw_rsc_aggregated", IXGBE_STAT(rsc_total_count)},
+	{"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)},
 	{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
 	{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
-	{"rx_fifo_errors", IXGBE_STAT(net_stats.rx_fifo_errors)},
-	{"rx_missed_errors", IXGBE_STAT(net_stats.rx_missed_errors)},
-	{"tx_aborted_errors", IXGBE_STAT(net_stats.tx_aborted_errors)},
-	{"tx_carrier_errors", IXGBE_STAT(net_stats.tx_carrier_errors)},
-	{"tx_fifo_errors", IXGBE_STAT(net_stats.tx_fifo_errors)},
-	{"tx_heartbeat_errors", IXGBE_STAT(net_stats.tx_heartbeat_errors)},
+	{"rx_fifo_errors", IXGBE_NETDEV_STAT(stats.rx_fifo_errors)},
+	{"rx_missed_errors", IXGBE_NETDEV_STAT(stats.rx_missed_errors)},
+	{"tx_aborted_errors", IXGBE_NETDEV_STAT(stats.tx_aborted_errors)},
+	{"tx_carrier_errors", IXGBE_NETDEV_STAT(stats.tx_carrier_errors)},
+	{"tx_fifo_errors", IXGBE_NETDEV_STAT(stats.tx_fifo_errors)},
+	{"tx_heartbeat_errors", IXGBE_NETDEV_STAT(stats.tx_heartbeat_errors)},
 	{"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
 	{"tx_restart_queue", IXGBE_STAT(restart_queue)},
 	{"rx_long_length_errors", IXGBE_STAT(stats.roc)},
 	{"rx_short_length_errors", IXGBE_STAT(stats.ruc)},
-	{"tx_tcp4_seg_ctxt", IXGBE_STAT(hw_tso_ctxt)},
-	{"tx_tcp6_seg_ctxt", IXGBE_STAT(hw_tso6_ctxt)},
 	{"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)},
 	{"rx_flow_control_xon", IXGBE_STAT(stats.lxonrxc)},
 	{"tx_flow_control_xoff", IXGBE_STAT(stats.lxofftxc)},
 	{"rx_flow_control_xoff", IXGBE_STAT(stats.lxoffrxc)},
-	{"rx_csum_offload_good", IXGBE_STAT(hw_csum_rx_good)},
 	{"rx_csum_offload_errors", IXGBE_STAT(hw_csum_rx_error)},
-	{"tx_csum_offload_ctxt", IXGBE_STAT(hw_csum_tx_good)},
-	{"rx_header_split", IXGBE_STAT(rx_hdr_split)},
 	{"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
 	{"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
 	{"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
@@ -196,6 +200,56 @@
 		ecmd->autoneg = AUTONEG_DISABLE;
 	}
 
+	/* Get PHY type */
+	switch (adapter->hw.phy.type) {
+	case ixgbe_phy_tn:
+	case ixgbe_phy_cu_unknown:
+		/* Copper 10G-BASET */
+		ecmd->port = PORT_TP;
+		break;
+	case ixgbe_phy_qt:
+		ecmd->port = PORT_FIBRE;
+		break;
+	case ixgbe_phy_nl:
+	case ixgbe_phy_tw_tyco:
+	case ixgbe_phy_tw_unknown:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		switch (adapter->hw.phy.sfp_type) {
+		/* SFP+ devices, further checking needed */
+		case ixgbe_sfp_type_da_cu:
+		case ixgbe_sfp_type_da_cu_core0:
+		case ixgbe_sfp_type_da_cu_core1:
+			ecmd->port = PORT_DA;
+			break;
+		case ixgbe_sfp_type_sr:
+		case ixgbe_sfp_type_lr:
+		case ixgbe_sfp_type_srlr_core0:
+		case ixgbe_sfp_type_srlr_core1:
+			ecmd->port = PORT_FIBRE;
+			break;
+		case ixgbe_sfp_type_not_present:
+			ecmd->port = PORT_NONE;
+			break;
+		case ixgbe_sfp_type_unknown:
+		default:
+			ecmd->port = PORT_OTHER;
+			break;
+		}
+		break;
+	case ixgbe_phy_xaui:
+		ecmd->port = PORT_NONE;
+		break;
+	case ixgbe_phy_unknown:
+	case ixgbe_phy_generic:
+	case ixgbe_phy_sfp_unsupported:
+	default:
+		ecmd->port = PORT_OTHER;
+		break;
+	}
+
 	hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
 	if (link_up) {
 		ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
@@ -933,10 +987,21 @@
 	int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64);
 	int j, k;
 	int i;
+	char *p = NULL;
 
 	ixgbe_update_stats(adapter);
 	for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter + ixgbe_gstrings_stats[i].stat_offset;
+		switch (ixgbe_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					ixgbe_gstrings_stats[i].stat_offset;
+			break;
+		case IXGBE_STATS:
+			p = (char *) adapter +
+					ixgbe_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
 		           sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
@@ -1255,15 +1320,15 @@
 		return 0;
 	} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
 		shared_int = false;
-		if (request_irq(irq, &ixgbe_test_intr, 0, netdev->name,
+		if (request_irq(irq, ixgbe_test_intr, 0, netdev->name,
 				netdev)) {
 			*data = 1;
 			return -1;
 		}
-	} else if (!request_irq(irq, &ixgbe_test_intr, IRQF_PROBE_SHARED,
+	} else if (!request_irq(irq, ixgbe_test_intr, IRQF_PROBE_SHARED,
 	                        netdev->name, netdev)) {
 		shared_int = false;
-	} else if (request_irq(irq, &ixgbe_test_intr, IRQF_SHARED,
+	} else if (request_irq(irq, ixgbe_test_intr, IRQF_SHARED,
 	                       netdev->name, netdev)) {
 		*data = 1;
 		return -1;
@@ -1952,6 +2017,10 @@
 		break;
 	}
 
+	/* if in mixed tx/rx queues per vector mode, report only rx settings */
+	if (adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count)
+		return 0;
+
 	/* only valid if in constant ITR mode */
 	switch (adapter->tx_itr_setting) {
 	case 0:
@@ -1977,12 +2046,9 @@
 	struct ixgbe_q_vector *q_vector;
 	int i;
 
-	/*
-	 * don't accept tx specific changes if we've got mixed RxTx vectors
-	 * test and jump out here if needed before changing the rx numbers
-	 */
-	if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param &&
-	    adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count)
+	/* don't accept tx specific changes if we've got mixed RxTx vectors */
+	if (adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count
+	   && ec->tx_coalesce_usecs)
 		return -EINVAL;
 
 	if (ec->tx_max_coalesced_frames_irq)
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index a3c9f99..da32a10 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -499,6 +499,10 @@
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct ixgbe_fcoe *fcoe = &adapter->fcoe;
 	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+#ifdef CONFIG_IXGBE_DCB
+	u8 tc;
+	u32 up2tc;
+#endif
 
 	/* create the pool for ddp if not created yet */
 	if (!fcoe->pool) {
@@ -540,6 +544,17 @@
 			IXGBE_FCRXCTRL_FCOELLI |
 			IXGBE_FCRXCTRL_FCCRCBO |
 			(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
+#ifdef CONFIG_IXGBE_DCB
+	up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
+	for (i = 0; i < MAX_USER_PRIORITY; i++) {
+		tc = (u8)(up2tc >> (i * IXGBE_RTTUP2TC_UP_SHIFT));
+		tc &= (MAX_TRAFFIC_CLASS - 1);
+		if (fcoe->tc == tc) {
+			fcoe->up = i;
+			break;
+		}
+	}
+#endif
 }
 
 /**
@@ -671,19 +686,7 @@
  */
 u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter)
 {
-	int i;
-	u8 tc;
-	u32 up2tc;
-
-	up2tc = IXGBE_READ_REG(&adapter->hw, IXGBE_RTTUP2TC);
-	for (i = 0; i < MAX_USER_PRIORITY; i++) {
-		tc = (u8)(up2tc >> (i * IXGBE_RTTUP2TC_UP_SHIFT));
-		tc &= (MAX_TRAFFIC_CLASS - 1);
-		if (adapter->fcoe.tc == tc)
-			return 1 << i;
-	}
-
-	return 0;
+	return 1 << adapter->fcoe.up;
 }
 
 /**
@@ -710,6 +713,7 @@
 				up2tc >>= (i * IXGBE_RTTUP2TC_UP_SHIFT);
 				up2tc &= (MAX_TRAFFIC_CLASS - 1);
 				adapter->fcoe.tc = (u8)up2tc;
+				adapter->fcoe.up = i;
 				return 0;
 			}
 		}
@@ -718,3 +722,49 @@
 	return 1;
 }
 #endif /* CONFIG_IXGBE_DCB */
+
+/**
+ * ixgbe_fcoe_get_wwn - get world wide name for the node or the port
+ * @netdev : ixgbe adapter
+ * @wwn : the world wide name
+ * @type: the type of world wide name
+ *
+ * Returns the node or port world wide name if both the prefix and the san
+ * mac address are valid, then the wwn is formed based on the NAA-2 for
+ * IEEE Extended name identifier (ref. to T10 FC-LS Spec., Sec. 15.3).
+ *
+ * Returns : 0 on success
+ */
+int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
+{
+	int rc = -EINVAL;
+	u16 prefix = 0xffff;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	switch (type) {
+	case NETDEV_FCOE_WWNN:
+		prefix = mac->wwnn_prefix;
+		break;
+	case NETDEV_FCOE_WWPN:
+		prefix = mac->wwpn_prefix;
+		break;
+	default:
+		break;
+	}
+
+	if ((prefix != 0xffff) &&
+	    is_valid_ether_addr(mac->san_addr)) {
+		*wwn = ((u64) prefix << 48) |
+		       ((u64) mac->san_addr[0] << 40) |
+		       ((u64) mac->san_addr[1] << 32) |
+		       ((u64) mac->san_addr[2] << 24) |
+		       ((u64) mac->san_addr[3] << 16) |
+		       ((u64) mac->san_addr[4] << 8)  |
+		       ((u64) mac->san_addr[5]);
+		rc = 0;
+	}
+	return rc;
+}
+
+
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.h b/drivers/net/ixgbe/ixgbe_fcoe.h
index b5dee7b..de8ff53 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.h
+++ b/drivers/net/ixgbe/ixgbe_fcoe.h
@@ -62,7 +62,10 @@
 };
 
 struct ixgbe_fcoe {
+#ifdef CONFIG_IXGBE_DCB
 	u8 tc;
+	u8 up;
+#endif
 	spinlock_t lock;
 	struct pci_pool *pool;
 	struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index a5036f7..247ed2a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -98,6 +98,8 @@
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
@@ -216,10 +218,20 @@
                                              struct ixgbe_tx_buffer
                                              *tx_buffer_info)
 {
-	tx_buffer_info->dma = 0;
+	if (tx_buffer_info->dma) {
+		if (tx_buffer_info->mapped_as_page)
+			pci_unmap_page(adapter->pdev,
+				       tx_buffer_info->dma,
+				       tx_buffer_info->length,
+				       PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(adapter->pdev,
+					 tx_buffer_info->dma,
+					 tx_buffer_info->length,
+					 PCI_DMA_TODEVICE);
+		tx_buffer_info->dma = 0;
+	}
 	if (tx_buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, tx_buffer_info->skb,
-		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(tx_buffer_info->skb);
 		tx_buffer_info->skb = NULL;
 	}
@@ -240,11 +252,11 @@
 static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
                                       struct ixgbe_ring *tx_ring)
 {
-	int tc;
 	u32 txoff = IXGBE_TFCS_TXOFF;
 
 #ifdef CONFIG_IXGBE_DCB
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		int tc;
 		int reg_idx = tx_ring->reg_idx;
 		int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
 
@@ -401,7 +413,7 @@
 		if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
 		    !test_bit(__IXGBE_DOWN, &adapter->state)) {
 			netif_wake_subqueue(netdev, tx_ring->queue_index);
-			++adapter->restart_queue;
+			++tx_ring->restart_queue;
 		}
 	}
 
@@ -423,8 +435,8 @@
 	tx_ring->total_packets += total_packets;
 	tx_ring->stats.packets += total_packets;
 	tx_ring->stats.bytes += total_bytes;
-	adapter->net_stats.tx_bytes += total_bytes;
-	adapter->net_stats.tx_packets += total_packets;
+	netdev->stats.tx_bytes += total_bytes;
+	netdev->stats.tx_packets += total_packets;
 	return (count < tx_ring->work_limit);
 }
 
@@ -612,7 +624,6 @@
 
 	/* It must be a TCP or UDP packet with a valid checksum */
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	adapter->hw_csum_rx_good++;
 }
 
 static inline void ixgbe_release_rx_desc(struct ixgbe_hw *hw,
@@ -669,21 +680,18 @@
 
 		if (!bi->skb) {
 			struct sk_buff *skb;
-			skb = netdev_alloc_skb(adapter->netdev,
-			                       (rx_ring->rx_buf_len +
-			                        NET_IP_ALIGN));
+			/* netdev_alloc_skb reserves 32 bytes up front!! */
+			uint bufsz = rx_ring->rx_buf_len + SMP_CACHE_BYTES;
+			skb = netdev_alloc_skb(adapter->netdev, bufsz);
 
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
 				goto no_buffers;
 			}
 
-			/*
-			 * Make buffer alignment 2 beyond a 16 byte boundary
-			 * this will result in a 16 byte aligned IP header after
-			 * the 14 byte MAC header is removed
-			 */
-			skb_reserve(skb, NET_IP_ALIGN);
+			/* advance the data pointer to the next cache line */
+			skb_reserve(skb, (PTR_ALIGN(skb->data, SMP_CACHE_BYTES)
+			                  - skb->data));
 
 			bi->skb = skb;
 			bi->dma = pci_map_single(pdev, skb->data,
@@ -735,12 +743,14 @@
 /**
  * ixgbe_transform_rsc_queue - change rsc queue into a full packet
  * @skb: pointer to the last skb in the rsc queue
+ * @count: pointer to number of packets coalesced in this context
  *
  * This function changes a queue full of hw rsc buffers into a completed
  * packet.  It uses the ->prev pointers to find the first packet and then
  * turns it into the frag list owner.
  **/
-static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
+static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb,
+                                                        u64 *count)
 {
 	unsigned int frag_list_size = 0;
 
@@ -749,6 +759,7 @@
 		frag_list_size += skb->len;
 		skb->prev = NULL;
 		skb = prev;
+		*count += 1;
 	}
 
 	skb_shinfo(skb)->frag_list = skb->next;
@@ -764,6 +775,7 @@
                                int *work_done, int work_to_do)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
 	struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
@@ -793,8 +805,6 @@
 			hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
 			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
 			       IXGBE_RXDADV_HDRBUFLEN_SHIFT;
-			if (hdr_info & IXGBE_RXDADV_SPH)
-				adapter->rx_hdr_split++;
 			if (len > IXGBE_RX_HDR_SIZE)
 				len = IXGBE_RX_HDR_SIZE;
 			upper_len = le16_to_cpu(rx_desc->wb.upper.length);
@@ -804,7 +814,7 @@
 
 		cleaned = true;
 		skb = rx_buffer_info->skb;
-		prefetch(skb->data - NET_IP_ALIGN);
+		prefetch(skb->data);
 		rx_buffer_info->skb = NULL;
 
 		if (rx_buffer_info->dma) {
@@ -850,14 +860,20 @@
 			u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
 				     IXGBE_RXDADV_NEXTP_SHIFT;
 			next_buffer = &rx_ring->rx_buffer_info[nextp];
-			rx_ring->rsc_count += (rsc_count - 1);
 		} else {
 			next_buffer = &rx_ring->rx_buffer_info[i];
 		}
 
 		if (staterr & IXGBE_RXD_STAT_EOP) {
 			if (skb->prev)
-				skb = ixgbe_transform_rsc_queue(skb);
+				skb = ixgbe_transform_rsc_queue(skb, &(rx_ring->rsc_count));
+			if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+				if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)
+					rx_ring->rsc_count += skb_shinfo(skb)->nr_frags;
+				else
+					rx_ring->rsc_count++;
+				rx_ring->rsc_flush++;
+			}
 			rx_ring->stats.packets++;
 			rx_ring->stats.bytes += skb->len;
 		} else {
@@ -870,7 +886,7 @@
 				skb->next = next_buffer->skb;
 				skb->next->prev = skb;
 			}
-			adapter->non_eop_descs++;
+			rx_ring->non_eop_descs++;
 			goto next_desc;
 		}
 
@@ -935,8 +951,8 @@
 
 	rx_ring->total_packets += total_rx_packets;
 	rx_ring->total_bytes += total_rx_bytes;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 
 	return cleaned;
 }
@@ -1209,6 +1225,7 @@
 	adapter->link_check_timeout = jiffies;
 	if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
 		IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
+		IXGBE_WRITE_FLUSH(hw);
 		schedule_work(&adapter->watchdog_task);
 	}
 }
@@ -1312,8 +1329,7 @@
 		                      r_idx + 1);
 	}
 
-	/* disable interrupts on this vector only */
-	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	/* EIAM disabled interrupts (on this vector) for us */
 	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
@@ -1344,10 +1360,8 @@
 	if (!q_vector->rxr_count)
 		return IRQ_HANDLED;
 
-	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	rx_ring = &(adapter->rx_ring[r_idx]);
 	/* disable interrupts on this vector only */
-	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	/* EIAM disabled interrupts (on this vector) for us */
 	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
@@ -1382,8 +1396,7 @@
 		                      r_idx + 1);
 	}
 
-	/* disable interrupts on this vector only */
-	ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+	/* EIAM disabled interrupts (on this vector) for us */
 	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
@@ -1667,7 +1680,7 @@
 
 	sprintf(adapter->name[vector], "%s:lsc", netdev->name);
 	err = request_irq(adapter->msix_entries[vector].vector,
-	                  &ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
+	                  ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
 	if (err) {
 		DPRINTK(PROBE, ERR,
 			"request_irq for msix_lsc failed: %d\n", err);
@@ -1838,10 +1851,10 @@
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
 		err = ixgbe_request_msix_irqs(adapter);
 	} else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
-		err = request_irq(adapter->pdev->irq, &ixgbe_intr, 0,
+		err = request_irq(adapter->pdev->irq, ixgbe_intr, 0,
 		                  netdev->name, netdev);
 	} else {
-		err = request_irq(adapter->pdev->irq, &ixgbe_intr, IRQF_SHARED,
+		err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED,
 		                  netdev->name, netdev);
 	}
 
@@ -2063,18 +2076,18 @@
  * ixgbe_configure_rscctl - enable RSC for the indicated ring
  * @adapter:    address of board private structure
  * @index:      index of ring to set
- * @rx_buf_len: rx buffer length
  **/
-static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index,
-                                   int rx_buf_len)
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index)
 {
 	struct ixgbe_ring *rx_ring;
 	struct ixgbe_hw *hw = &adapter->hw;
 	int j;
 	u32 rscctrl;
+	int rx_buf_len;
 
 	rx_ring = &adapter->rx_ring[index];
 	j = rx_ring->reg_idx;
+	rx_buf_len = rx_ring->rx_buf_len;
 	rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
 	rscctrl |= IXGBE_RSCCTL_RSCEN;
 	/*
@@ -2282,7 +2295,7 @@
 	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		/* Enable 82599 HW-RSC */
 		for (i = 0; i < adapter->num_rx_queues; i++)
-			ixgbe_configure_rscctl(adapter, i, rx_buf_len);
+			ixgbe_configure_rscctl(adapter, i);
 
 		/* Disable RSC for ACK packets */
 		IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
@@ -2333,23 +2346,25 @@
 	 * not in DCB mode.
 	 */
 	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+
+	/* Disable CFI check */
+	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+
+	/* enable VLAN tag stripping */
 	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
-		ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE;
-		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+		ctrl |= IXGBE_VLNCTRL_VME;
 	} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		ctrl |= IXGBE_VLNCTRL_VFE;
-		/* enable VLAN tag insert/strip */
-		ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
-		ctrl &= ~IXGBE_VLNCTRL_CFIEN;
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
 		for (i = 0; i < adapter->num_rx_queues; i++) {
+			u32 ctrl;
 			j = adapter->rx_ring[i].reg_idx;
 			ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(j));
 			ctrl |= IXGBE_RXDCTL_VME;
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(j), ctrl);
 		}
 	}
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+
 	ixgbe_vlan_rx_add_vid(netdev, 0);
 
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
@@ -2699,7 +2714,22 @@
 		IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
 	}
 
-	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		/*
+		 * use EIAM to auto-mask when MSI-X interrupt is asserted
+		 * this saves a register write for every interrupt
+		 */
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+			break;
+		default:
+		case ixgbe_mac_82599EB:
+			IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
+			IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
+			break;
+		}
+	} else {
 		/* legacy interrupts, use EIAM to auto-mask when reading EICR,
 		 * specifically only auto mask tx and rx interrupts */
 		IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
@@ -3632,10 +3662,10 @@
 	 * It's easy to be greedy for MSI-X vectors, but it really
 	 * doesn't do us much good if we have a lot more vectors
 	 * than CPU's.  So let's be conservative and only ask for
-	 * (roughly) twice the number of vectors as there are CPU's.
+	 * (roughly) the same number of vectors as there are CPU's.
 	 */
 	v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
-	               (int)(num_online_cpus() * 2)) + NON_Q_VECTORS;
+	               (int)num_online_cpus()) + NON_Q_VECTORS;
 
 	/*
 	 * At the same time, hardware can only support a maximum of
@@ -3943,8 +3973,10 @@
 		adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
 		adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
 		adapter->ring_feature[RING_F_FCOE].indices = 0;
+#ifdef CONFIG_IXGBE_DCB
 		/* Default traffic class to use for FCoE */
 		adapter->fcoe.tc = IXGBE_FCOE_DEFTC;
+#endif
 #endif /* IXGBE_FCOE */
 	}
 
@@ -4475,20 +4507,32 @@
  **/
 void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
 	u64 total_mpc = 0;
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
 
-	if (hw->mac.type == ixgbe_mac_82599EB) {
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		u64 rsc_count = 0;
+		u64 rsc_flush = 0;
 		for (i = 0; i < 16; i++)
 			adapter->hw_rx_no_dma_resources +=
 			                     IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
-		for (i = 0; i < adapter->num_rx_queues; i++)
+		for (i = 0; i < adapter->num_rx_queues; i++) {
 			rsc_count += adapter->rx_ring[i].rsc_count;
-		adapter->rsc_count = rsc_count;
+			rsc_flush += adapter->rx_ring[i].rsc_flush;
+		}
+		adapter->rsc_total_count = rsc_count;
+		adapter->rsc_total_flush = rsc_flush;
 	}
 
+	/* gather some stats to the adapter struct that are per queue */
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		adapter->restart_queue += adapter->tx_ring[i].restart_queue;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		adapter->non_eop_descs += adapter->tx_ring[i].non_eop_descs;
+
 	adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
 	for (i = 0; i < 8; i++) {
 		/* for packet buffers not used, the register should read 0 */
@@ -4594,15 +4638,15 @@
 	adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
+	netdev->stats.multicast = adapter->stats.mprc;
 
 	/* Rx Errors */
-	adapter->net_stats.rx_errors = adapter->stats.crcerrs +
+	netdev->stats.rx_errors = adapter->stats.crcerrs +
 	                               adapter->stats.rlec;
-	adapter->net_stats.rx_dropped = 0;
-	adapter->net_stats.rx_length_errors = adapter->stats.rlec;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_missed_errors = total_mpc;
+	netdev->stats.rx_dropped = 0;
+	netdev->stats.rx_length_errors = adapter->stats.rlec;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_missed_errors = total_mpc;
 }
 
 /**
@@ -4871,14 +4915,12 @@
 			                                         iph->daddr, 0,
 			                                         IPPROTO_TCP,
 			                                         0);
-			adapter->hw_tso_ctxt++;
 		} else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
 			ipv6_hdr(skb)->payload_len = 0;
 			tcp_hdr(skb)->check =
 			    ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 			                     &ipv6_hdr(skb)->daddr,
 			                     0, IPPROTO_TCP, 0);
-			adapter->hw_tso6_ctxt++;
 		}
 
 		i = tx_ring->next_to_use;
@@ -4997,7 +5039,6 @@
 		tx_buffer_info->time_stamp = jiffies;
 		tx_buffer_info->next_to_watch = i;
 
-		adapter->hw_csum_tx_good++;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
@@ -5014,23 +5055,16 @@
                         struct sk_buff *skb, u32 tx_flags,
                         unsigned int first)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	struct ixgbe_tx_buffer *tx_buffer_info;
 	unsigned int len;
 	unsigned int total = skb->len;
 	unsigned int offset = 0, size, count = 0, i;
 	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned int f;
-	dma_addr_t *map;
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
-		return 0;
-	}
-
-	map = skb_shinfo(skb)->dma_maps;
-
 	if (tx_flags & IXGBE_TX_FLAGS_FCOE)
 		/* excluding fcoe_crc_eof for FCoE */
 		total -= sizeof(struct fcoe_crc_eof);
@@ -5041,7 +5075,12 @@
 		size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 		tx_buffer_info->length = size;
-		tx_buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
+		tx_buffer_info->mapped_as_page = false;
+		tx_buffer_info->dma = pci_map_single(pdev,
+						     skb->data + offset,
+						     size, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, tx_buffer_info->dma))
+			goto dma_error;
 		tx_buffer_info->time_stamp = jiffies;
 		tx_buffer_info->next_to_watch = i;
 
@@ -5062,7 +5101,7 @@
 
 		frag = &skb_shinfo(skb)->frags[f];
 		len = min((unsigned int)frag->size, total);
-		offset = 0;
+		offset = frag->page_offset;
 
 		while (len) {
 			i++;
@@ -5073,7 +5112,13 @@
 			size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 			tx_buffer_info->length = size;
-			tx_buffer_info->dma = map[f] + offset;
+			tx_buffer_info->dma = pci_map_page(adapter->pdev,
+							   frag->page,
+							   offset, size,
+							   PCI_DMA_TODEVICE);
+			tx_buffer_info->mapped_as_page = true;
+			if (pci_dma_mapping_error(pdev, tx_buffer_info->dma))
+				goto dma_error;
 			tx_buffer_info->time_stamp = jiffies;
 			tx_buffer_info->next_to_watch = i;
 
@@ -5090,6 +5135,27 @@
 	tx_ring->tx_buffer_info[first].next_to_watch = i;
 
 	return count;
+
+dma_error:
+	dev_err(&pdev->dev, "TX DMA map failed\n");
+
+	/* clear timestamp and dma mappings for failed tx_buffer_info map */
+	tx_buffer_info->dma = 0;
+	tx_buffer_info->time_stamp = 0;
+	tx_buffer_info->next_to_watch = 0;
+	count--;
+
+	/* clear timestamp and dma mappings for remaining portion of packet */
+	while (count >= 0) {
+		count--;
+		i--;
+		if (i < 0)
+			i += tx_ring->count;
+		tx_buffer_info = &tx_ring->tx_buffer_info[i];
+		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+	}
+
+	return count;
 }
 
 static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
@@ -5209,8 +5275,6 @@
 static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
                                  struct ixgbe_ring *tx_ring, int size)
 {
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
 	netif_stop_subqueue(netdev, tx_ring->queue_index);
 	/* Herbert's original patch had:
 	 *  smp_mb__after_netif_stop_queue();
@@ -5224,7 +5288,7 @@
 
 	/* A reprieve! - use start_queue because it doesn't call schedule */
 	netif_start_subqueue(netdev, tx_ring->queue_index);
-	++adapter->restart_queue;
+	++tx_ring->restart_queue;
 	return 0;
 }
 
@@ -5239,10 +5303,19 @@
 static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	int txq = smp_processor_id();
 
 	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
-		return smp_processor_id();
+		return txq;
 
+#ifdef IXGBE_FCOE
+	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+	    (skb->protocol == htons(ETH_P_FCOE))) {
+		txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
+		txq += adapter->ring_feature[RING_F_FCOE].mask;
+		return txq;
+	}
+#endif
 	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
 		return (skb->vlan_tci & IXGBE_TX_FLAGS_VLAN_PRIO_MASK) >> 13;
 
@@ -5257,7 +5330,7 @@
 	unsigned int first;
 	unsigned int tx_flags = 0;
 	u8 hdr_len = 0;
-	int r_idx = 0, tso;
+	int tso;
 	int count = 0;
 	unsigned int f;
 
@@ -5265,13 +5338,13 @@
 		tx_flags |= vlan_tx_tag_get(skb);
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
 			tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
-			tx_flags |= (skb->queue_mapping << 13);
+			tx_flags |= ((skb->queue_mapping & 0x7) << 13);
 		}
 		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
 		if (skb->priority != TC_PRIO_CONTROL) {
-			tx_flags |= (skb->queue_mapping << 13);
+			tx_flags |= ((skb->queue_mapping & 0x7) << 13);
 			tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 			tx_flags |= IXGBE_TX_FLAGS_VLAN;
 		} else {
@@ -5280,17 +5353,18 @@
 		}
 	}
 
-	r_idx = skb->queue_mapping;
-	tx_ring = &adapter->tx_ring[r_idx];
+	tx_ring = &adapter->tx_ring[skb->queue_mapping];
 
 	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
 	    (skb->protocol == htons(ETH_P_FCOE))) {
 		tx_flags |= IXGBE_TX_FLAGS_FCOE;
 #ifdef IXGBE_FCOE
-		r_idx = smp_processor_id();
-		r_idx &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
-		r_idx += adapter->ring_feature[RING_F_FCOE].mask;
-		tx_ring = &adapter->tx_ring[r_idx];
+#ifdef CONFIG_IXGBE_DCB
+		tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
+			      << IXGBE_TX_FLAGS_VLAN_SHIFT);
+		tx_flags |= ((adapter->fcoe.up << 13)
+			      << IXGBE_TX_FLAGS_VLAN_SHIFT);
+#endif
 #endif
 	}
 	/* four things can cause us to need a context descriptor */
@@ -5372,10 +5446,8 @@
  **/
 static struct net_device_stats *ixgbe_get_stats(struct net_device *netdev)
 {
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -5527,6 +5599,7 @@
 	.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
 	.ndo_fcoe_enable = ixgbe_fcoe_enable,
 	.ndo_fcoe_disable = ixgbe_fcoe_disable,
+	.ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn,
 #endif /* IXGBE_FCOE */
 };
 
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index ef4bdd5..21b6633da 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -52,6 +52,7 @@
 #define IXGBE_DEV_ID_82599_KX4_MEZZ      0x1514
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
+#define IXGBE_DEV_ID_82599_SFP_EM        0x1507
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 #define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 
@@ -1538,6 +1539,16 @@
 #define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
 #define IXGBE_FW_PATCH_VERSION_4   0x7
 
+/* Alternative SAN MAC Address Block */
+#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR      0x27 /* Alt. SAN MAC block */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET  0x0 /* Alt. SAN MAC capability */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt. SAN MAC 1 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET  0x7 /* Alt. WWNN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET  0x8 /* Alt. WWPN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC  0x0 /* Alt. SAN MAC exists */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN  0x1 /* Alt. WWN base exists */
+
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
 #define IXGBE_PCI_DEVICE_CONTROL2 0xC8
@@ -2171,6 +2182,14 @@
 	ixgbe_fc_default
 };
 
+/* Smart Speed Settings */
+#define IXGBE_SMARTSPEED_MAX_RETRIES	3
+enum ixgbe_smart_speed {
+	ixgbe_smart_speed_auto = 0,
+	ixgbe_smart_speed_on,
+	ixgbe_smart_speed_off
+};
+
 /* PCI bus types */
 enum ixgbe_bus_type {
 	ixgbe_bus_type_unknown = 0,
@@ -2336,6 +2355,7 @@
 	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
 	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
 	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
+	s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
 	s32 (*stop_adapter)(struct ixgbe_hw *);
 	s32 (*get_bus_info)(struct ixgbe_hw *);
 	void (*set_lan_id)(struct ixgbe_hw *);
@@ -2407,6 +2427,10 @@
 	u8                              addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	u8                              perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	u8                              san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	/* prefix for World Wide Node Name (WWNN) */
+	u16                             wwnn_prefix;
+	/* prefix for World Wide Port Name (WWPN) */
+	u16                             wwpn_prefix;
 	s32                             mc_filter_type;
 	u32                             mcft_size;
 	u32                             vft_size;
@@ -2431,6 +2455,8 @@
 	enum ixgbe_media_type           media_type;
 	bool                            reset_disable;
 	ixgbe_autoneg_advertised        autoneg_advertised;
+	enum ixgbe_smart_speed          smart_speed;
+	bool                            smart_speed_active;
 	bool                            multispeed_fiber;
 };
 
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 9aee0cc..e9d9d59 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -109,9 +109,8 @@
 		if (unlikely(!netif_running(nds[desc->channel])))
 			goto err;
 
-		skb = netdev_alloc_skb(dev, desc->pkt_length + 2);
+		skb = netdev_alloc_skb_ip_align(dev, desc->pkt_length);
 		if (likely(skb != NULL)) {
-			skb_reserve(skb, 2);
 			skb_copy_to_linear_data(skb, buf, desc->pkt_length);
 			skb_put(skb, desc->pkt_length);
 			skb->protocol = eth_type_trans(skb, nds[desc->channel]);
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 6e5b3f3..f47d4d6 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -81,7 +81,7 @@
 
 static int jazzsonic_open(struct net_device* dev)
 {
-	if (request_irq(dev->irq, &sonic_interrupt, IRQF_DISABLED, "sonic", dev)) {
+	if (request_irq(dev->irq, sonic_interrupt, IRQF_DISABLED, "sonic", dev)) {
 		printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
@@ -130,8 +130,8 @@
 		printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision);
 
 	i = 0;
-	while (known_revisions[i] != 0xffff
-	       && known_revisions[i] != silicon_revision)
+	while (known_revisions[i] != 0xffff &&
+	       known_revisions[i] != silicon_revision)
 		i++;
 
 	if (known_revisions[i] == 0xffff) {
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 1d2a325..792b88f 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -1050,8 +1050,8 @@
 
 	if ((NET_STAT(jme).rx_bytes - dpi->last_bytes) > PCC_P3_THRESHOLD)
 		jme_attempt_pcc(dpi, PCC_P3);
-	else if ((NET_STAT(jme).rx_packets - dpi->last_pkts) > PCC_P2_THRESHOLD
-	|| dpi->intr_cnt > PCC_INTR_THRESHOLD)
+	else if ((NET_STAT(jme).rx_packets - dpi->last_pkts) > PCC_P2_THRESHOLD ||
+		 dpi->intr_cnt > PCC_INTR_THRESHOLD)
 		jme_attempt_pcc(dpi, PCC_P2);
 	else
 		jme_attempt_pcc(dpi, PCC_P1);
@@ -2199,8 +2199,8 @@
 	if (netif_running(netdev))
 		return -EBUSY;
 
-	if (ecmd->use_adaptive_rx_coalesce
-	&& test_bit(JME_FLAG_POLL, &jme->flags)) {
+	if (ecmd->use_adaptive_rx_coalesce &&
+	    test_bit(JME_FLAG_POLL, &jme->flags)) {
 		clear_bit(JME_FLAG_POLL, &jme->flags);
 		jme->jme_rx = netif_rx;
 		jme->jme_vlan_rx = vlan_hwaccel_rx;
@@ -2209,8 +2209,8 @@
 		dpi->cnt		= 0;
 		jme_set_rx_pcc(jme, PCC_P1);
 		jme_interrupt_mode(jme);
-	} else if (!(ecmd->use_adaptive_rx_coalesce)
-	&& !(test_bit(JME_FLAG_POLL, &jme->flags))) {
+	} else if (!(ecmd->use_adaptive_rx_coalesce) &&
+		   !(test_bit(JME_FLAG_POLL, &jme->flags))) {
 		set_bit(JME_FLAG_POLL, &jme->flags);
 		jme->jme_rx = netif_receive_skb;
 		jme->jme_vlan_rx = vlan_hwaccel_receive_skb;
@@ -2764,19 +2764,19 @@
 	atomic_set(&jme->rx_empty, 1);
 
 	tasklet_init(&jme->pcc_task,
-		     &jme_pcc_tasklet,
+		     jme_pcc_tasklet,
 		     (unsigned long) jme);
 	tasklet_init(&jme->linkch_task,
-		     &jme_link_change_tasklet,
+		     jme_link_change_tasklet,
 		     (unsigned long) jme);
 	tasklet_init(&jme->txclean_task,
-		     &jme_tx_clean_tasklet,
+		     jme_tx_clean_tasklet,
 		     (unsigned long) jme);
 	tasklet_init(&jme->rxclean_task,
-		     &jme_rx_clean_tasklet,
+		     jme_rx_clean_tasklet,
 		     (unsigned long) jme);
 	tasklet_init(&jme->rxempty_task,
-		     &jme_rx_empty_tasklet,
+		     jme_rx_empty_tasklet,
 		     (unsigned long) jme);
 	tasklet_disable_nosync(&jme->linkch_task);
 	tasklet_disable_nosync(&jme->txclean_task);
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 03199fa..25e2af6 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -400,7 +400,7 @@
 			dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
 
 			/* Malloc up new buffer. */
-			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+			skb_new = netdev_alloc_skb_ip_align(dev, KORINA_RBSIZE);
 
 			if (!skb_new)
 				break;
@@ -417,9 +417,6 @@
 			if (devcs & ETH_RX_MP)
 				dev->stats.multicast++;
 
-			/* 16 bit align */
-			skb_reserve(skb_new, 2);
-
 			lp->rx_skb[lp->rx_next_done] = skb_new;
 		}
 
@@ -1017,14 +1014,14 @@
 	/* Install the interrupt handler
 	 * that handles the Done Finished
 	 * Ovr and Und Events */
-	ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
+	ret = request_irq(lp->rx_irq, korina_rx_dma_interrupt,
 			IRQF_DISABLED, "Korina ethernet Rx", dev);
 	if (ret < 0) {
 		printk(KERN_ERR "%s: unable to get Rx DMA IRQ %d\n",
 		    dev->name, lp->rx_irq);
 		goto err_release;
 	}
-	ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
+	ret = request_irq(lp->tx_irq, korina_tx_dma_interrupt,
 			IRQF_DISABLED, "Korina ethernet Tx", dev);
 	if (ret < 0) {
 		printk(KERN_ERR "%s: unable to get Tx DMA IRQ %d\n",
@@ -1033,7 +1030,7 @@
 	}
 
 	/* Install handler for overrun error. */
-	ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
+	ret = request_irq(lp->ovr_irq, korina_ovr_interrupt,
 			IRQF_DISABLED, "Ethernet Overflow", dev);
 	if (ret < 0) {
 		printk(KERN_ERR "%s: unable to get OVR IRQ %d\n",
@@ -1042,7 +1039,7 @@
 	}
 
 	/* Install handler for underflow error. */
-	ret = request_irq(lp->und_irq, &korina_und_interrupt,
+	ret = request_irq(lp->und_irq, korina_und_interrupt,
 			IRQF_DISABLED, "Ethernet Underflow", dev);
 	if (ret < 0) {
 		printk(KERN_ERR "%s: unable to get UND IRQ %d\n",
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index 99e9541..5c45cb5 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -357,7 +357,7 @@
 
 	/* check the status */
 	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
-		struct sk_buff *skb = netdev_alloc_skb(netdev, len + 2);
+		struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len);
 
 		dev_dbg(&adapter->pdev->dev, "%s, got package, len: %d\n",
 			__func__, len);
@@ -369,9 +369,6 @@
 			if (status & RXSR_MULTICAST)
 				netdev->stats.multicast++;
 
-			/* Align socket buffer in 4-byte boundary for
-				 better performance. */
-			skb_reserve(skb, 2);
 			data = (u32 *)skb_put(skb, len);
 
 			ks8842_select_bank(adapter, 17);
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index a23f739..6d3ac65 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -1,4 +1,4 @@
-/* drivers/net/ks8651.c
+/* drivers/net/ks8851.c
  *
  * Copyright 2009 Simtec Electronics
  *	http://www.simtec.co.uk/
@@ -714,7 +714,7 @@
 {
 	struct ks8851_net *ks = container_of(work, struct ks8851_net, tx_work);
 	struct sk_buff *txb;
-	bool last = false;
+	bool last = skb_queue_empty(&ks->txq);
 
 	mutex_lock(&ks->lock);
 
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 0be14d7..c146304 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -568,6 +568,16 @@
 		iowrite16(*wptr++, ks->hw_addr);
 }
 
+static void ks_disable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, 0x0000);
+}  /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+	ks_wrreg16(ks, KS_IER, ks->rc_ier);
+}  /* ks_enable_int */
+
 /**
  * ks_tx_fifo_space - return the available hardware buffer size.
  * @ks: The chip information
@@ -681,6 +691,47 @@
 }
 
 
+void ks_enable_qmu(struct ks_net *ks)
+{
+	u16 w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+	/* Enables QMU Transmit (TXCR). */
+	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+	/*
+	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+	 * Enable
+	 */
+
+	w = ks_rdreg16(ks, KS_RXQCR);
+	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+	/* Enables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+	ks->enabled = true;
+}  /* ks_enable_qmu */
+
+static void ks_disable_qmu(struct ks_net *ks)
+{
+	u16	w;
+
+	w = ks_rdreg16(ks, KS_TXCR);
+
+	/* Disables QMU Transmit (TXCR). */
+	w  &= ~TXCR_TXE;
+	ks_wrreg16(ks, KS_TXCR, w);
+
+	/* Disables QMU Receive (RXCR1). */
+	w = ks_rdreg16(ks, KS_RXCR1);
+	w &= ~RXCR1_RXE ;
+	ks_wrreg16(ks, KS_RXCR1, w);
+
+	ks->enabled = false;
+
+}  /* ks_disable_qmu */
+
 /**
  * ks_read_qmu - read 1 pkt data from the QMU.
  * @ks: The chip information
@@ -752,7 +803,7 @@
 			(frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
 			skb_reserve(skb, 2);
 			/* read data block including CRC 4 bytes */
-			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+			ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len);
 			skb_put(skb, frame_hdr->len);
 			skb->dev = netdev;
 			skb->protocol = eth_type_trans(skb, netdev);
@@ -861,7 +912,7 @@
 		ks_dbg(ks, "%s - entry\n", __func__);
 
 	/* reset the HW */
-	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+	err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev);
 
 	if (err) {
 		printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
@@ -869,6 +920,15 @@
 		return err;
 	}
 
+	/* wake up powermode to normal mode */
+	ks_set_powermode(ks, PMECR_PM_NORMAL);
+	mdelay(1);	/* wait for normal mode to take effect */
+
+	ks_wrreg16(ks, KS_ISR, 0xffff);
+	ks_enable_int(ks);
+	ks_enable_qmu(ks);
+	netif_start_queue(ks->netdev);
+
 	if (netif_msg_ifup(ks))
 		ks_dbg(ks, "network device %s up\n", netdev->name);
 
@@ -892,19 +952,14 @@
 
 	netif_stop_queue(netdev);
 
-	kfree(ks->frame_head_info);
-
 	mutex_lock(&ks->lock);
 
 	/* turn off the IRQs and ack any outstanding */
 	ks_wrreg16(ks, KS_IER, 0x0000);
 	ks_wrreg16(ks, KS_ISR, 0xffff);
 
-	/* shutdown RX process */
-	ks_wrreg16(ks, KS_RXCR1, 0x0000);
-
-	/* shutdown TX process */
-	ks_wrreg16(ks, KS_TXCR, 0x0000);
+	/* shutdown RX/TX QMU */
+	ks_disable_qmu(ks);
 
 	/* set powermode to soft power down to save power */
 	ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
@@ -929,17 +984,8 @@
  */
 static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
 {
-	unsigned fid = ks->fid;
-
-	fid = ks->fid;
-	ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
-
-	/* reduce the tx interrupt occurrances. */
-	if (!fid)
-		fid |= TXFR_TXIC;       /* irq on completion */
-
 	/* start header at txb[0] to align txw entries */
-	ks->txh.txw[0] = cpu_to_le16(fid);
+	ks->txh.txw[0] = 0;
 	ks->txh.txw[1] = cpu_to_le16(len);
 
 	/* 1. set sudo-DMA mode */
@@ -957,16 +1003,6 @@
 		;
 }
 
-static void ks_disable_int(struct ks_net *ks)
-{
-	ks_wrreg16(ks, KS_IER, 0x0000);
-}  /* ks_disable_int */
-
-static void ks_enable_int(struct ks_net *ks)
-{
-	ks_wrreg16(ks, KS_IER, ks->rc_ier);
-}  /* ks_enable_int */
-
 /**
  * ks_start_xmit - transmit packet
  * @skb		: The buffer to transmit
@@ -1410,25 +1446,6 @@
 	return ret;
 }
 
-static void ks_disable(struct ks_net *ks)
-{
-	u16	w;
-
-	w = ks_rdreg16(ks, KS_TXCR);
-
-	/* Disables QMU Transmit (TXCR). */
-	w  &= ~TXCR_TXE;
-	ks_wrreg16(ks, KS_TXCR, w);
-
-	/* Disables QMU Receive (RXCR1). */
-	w = ks_rdreg16(ks, KS_RXCR1);
-	w &= ~RXCR1_RXE ;
-	ks_wrreg16(ks, KS_RXCR1, w);
-
-	ks->enabled = false;
-
-}  /* ks_disable */
-
 static void ks_setup(struct ks_net *ks)
 {
 	u16	w;
@@ -1463,7 +1480,7 @@
 	w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
 	ks_wrreg16(ks, KS_TXCR, w);
 
-	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+	w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC;
 
 	if (ks->promiscuous)         /* bPromiscuous */
 		w |= (RXCR1_RXAE | RXCR1_RXINVF);
@@ -1486,28 +1503,6 @@
 	ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
 }  /* ks_setup_int */
 
-void ks_enable(struct ks_net *ks)
-{
-	u16 w;
-
-	w = ks_rdreg16(ks, KS_TXCR);
-	/* Enables QMU Transmit (TXCR). */
-	ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
-
-	/*
-	 * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
-	 * Enable
-	 */
-
-	w = ks_rdreg16(ks, KS_RXQCR);
-	ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
-
-	/* Enables QMU Receive (RXCR1). */
-	w = ks_rdreg16(ks, KS_RXCR1);
-	ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
-	ks->enabled = true;
-}  /* ks_enable */
-
 static int ks_hw_init(struct ks_net *ks)
 {
 #define	MHEADER_SIZE	(sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
@@ -1612,11 +1607,9 @@
 
 	ks_soft_reset(ks, GRR_GSR);
 	ks_hw_init(ks);
-	ks_disable(ks);
+	ks_disable_qmu(ks);
 	ks_setup(ks);
 	ks_setup_int(ks);
-	ks_enable_int(ks);
-	ks_enable(ks);
 	memcpy(netdev->dev_addr, ks->mac_addr, 6);
 
 	data = ks_rdreg16(ks, KS_OBCR);
@@ -1658,6 +1651,7 @@
 	struct ks_net *ks = netdev_priv(netdev);
 	struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	kfree(ks->frame_head_info);
 	unregister_netdev(netdev);
 	iounmap(ks->hw_addr);
 	free_netdev(netdev);
diff --git a/drivers/net/lance.c b/drivers/net/lance.c
index dcda303..8d7d3d4 100644
--- a/drivers/net/lance.c
+++ b/drivers/net/lance.c
@@ -493,14 +493,14 @@
 		static const short ioaddr_table[] = { 0x300, 0x320, 0x340, 0x360};
 		int hp_port = (readl(bios + 1) & 1)  ? 0x499 : 0x99;
 		/* We can have boards other than the built-in!  Verify this is on-board. */
-		if ((inb(hp_port) & 0xc0) == 0x80
-			&& ioaddr_table[inb(hp_port) & 3] == ioaddr)
+		if ((inb(hp_port) & 0xc0) == 0x80 &&
+		    ioaddr_table[inb(hp_port) & 3] == ioaddr)
 			hp_builtin = hp_port;
 	}
 	iounmap(bios);
 	/* We also recognize the HP Vectra on-board here, but check below. */
-	hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00
-				&& inb(ioaddr+2) == 0x09);
+	hpJ2405A = (inb(ioaddr) == 0x08 && inb(ioaddr+1) == 0x00 &&
+		    inb(ioaddr+2) == 0x09);
 
 	/* Reset the LANCE.	 */
 	reset_val = inw(ioaddr+LANCE_RESET); /* Reset the LANCE */
@@ -755,7 +755,7 @@
 	int i;
 
 	if (dev->irq == 0 ||
-		request_irq(dev->irq, &lance_interrupt, 0, lp->name, dev)) {
+		request_irq(dev->irq, lance_interrupt, 0, lp->name, dev)) {
 		return -EAGAIN;
 	}
 
@@ -1035,8 +1035,8 @@
 	spin_lock (&lp->devlock);
 
 	outw(0x00, dev->base_addr + LANCE_ADDR);
-	while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600
-		   && --boguscnt >= 0) {
+	while ((csr0 = inw(dev->base_addr + LANCE_DATA)) & 0x8600 &&
+	       --boguscnt >= 0) {
 		/* Acknowledge all of the current interrupt sources ASAP. */
 		outw(csr0 & ~0x004f, dev->base_addr + LANCE_DATA);
 
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 51e11c3..7a07430 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -470,11 +470,11 @@
 
 	for (i = 0, rbd = dma->rbds; i < rx_ring_size; i++, rbd++) {
 		dma_addr_t dma_addr;
-		struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+		struct sk_buff *skb;
 
+		skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
 		if (skb == NULL)
 			return -1;
-		skb_reserve(skb, 2);
 		dma_addr = dma_map_single(dev->dev.parent, skb->data,
 					  PKT_BUF_SZ, DMA_FROM_DEVICE);
 		rbd->v_next = rbd+1;
@@ -588,7 +588,7 @@
 			     "%s: i82596 initialization successful\n",
 			     dev->name));
 
-	if (request_irq(dev->irq, &i596_interrupt, 0, "i82596", dev)) {
+	if (request_irq(dev->irq, i596_interrupt, 0, "i82596", dev)) {
 		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
 		goto failed;
 	}
@@ -697,12 +697,12 @@
 						 (dma_addr_t)SWAP32(rbd->b_data),
 						 PKT_BUF_SZ, DMA_FROM_DEVICE);
 				/* Get fresh skbuff to replace filled one. */
-				newskb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+				newskb = netdev_alloc_skb_ip_align(dev,
+								   PKT_BUF_SZ);
 				if (newskb == NULL) {
 					skb = NULL;	/* drop pkt */
 					goto memory_squeeze;
 				}
-				skb_reserve(newskb, 2);
 
 				/* Pass up the skb already on the Rx ring. */
 				skb_put(skb, pkt_len);
@@ -716,7 +716,7 @@
 				rbd->b_data = SWAP32(dma_addr);
 				DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
 			} else
-				skb = netdev_alloc_skb(dev, pkt_len + 2);
+				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
 memory_squeeze:
 			if (skb == NULL) {
 				/* XXX tulip.c can defer packets here!! */
@@ -730,7 +730,6 @@
 					dma_sync_single_for_cpu(dev->dev.parent,
 								(dma_addr_t)SWAP32(rbd->b_data),
 								PKT_BUF_SZ, DMA_FROM_DEVICE);
-					skb_reserve(skb, 2);
 					memcpy(skb_put(skb, pkt_len), rbd->v_data, pkt_len);
 					dma_sync_single_for_device(dev->dev.parent,
 								   (dma_addr_t)SWAP32(rbd->b_data),
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index 2561198..57f2584 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -464,8 +464,8 @@
 			   ei_inb_p(e8390_base + EN0_ISR));
 
 	/* !!Assumption!! -- we stay in page 0.	 Don't break this. */
-	while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0
-		   && ++nr_serviced < MAX_SERVICE)
+	while ((interrupts = ei_inb_p(e8390_base + EN0_ISR)) != 0 &&
+	       ++nr_serviced < MAX_SERVICE)
 	{
 		if (!netif_running(dev)) {
 			printk(KERN_WARNING "%s: interrupt from stopped card\n", dev->name);
@@ -721,10 +721,10 @@
 		/* Check for bogosity warned by 3c503 book: the status byte is never
 		   written.  This happened a lot during testing! This code should be
 		   cleaned up someday. */
-		if (rx_frame.next != next_frame
-			&& rx_frame.next != next_frame + 1
-			&& rx_frame.next != next_frame - num_rx_pages
-			&& rx_frame.next != next_frame + 1 - num_rx_pages) {
+		if (rx_frame.next != next_frame &&
+		    rx_frame.next != next_frame + 1 &&
+		    rx_frame.next != next_frame - num_rx_pages &&
+		    rx_frame.next != next_frame + 1 - num_rx_pages) {
 			ei_local->current_page = rxing_page;
 			ei_outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY);
 			dev->stats.rx_errors++;
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index f2a197f..336e7c7 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -231,8 +231,8 @@
 	int i;
 
 	mutex_lock(&lp->indirect_mutex);
-	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC)
-			|| ndev->mc_count > MULTICAST_CAM_TABLE_NUM) {
+	if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) ||
+	    ndev->mc_count > MULTICAST_CAM_TABLE_NUM) {
 		/*
 		 *	We must make the kernel realise we had to move
 		 *	into promisc mode or we start all out war on
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 1bc654a..eae4ad7 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -207,20 +207,12 @@
 out_free_netdev:
 	free_netdev(dev);
 out:
-	if (net == &init_net)
+	if (net_eq(net, &init_net))
 		panic("loopback: Failed to register netdevice: %d\n", err);
 	return err;
 }
 
-static __net_exit void loopback_net_exit(struct net *net)
-{
-	struct net_device *dev = net->loopback_dev;
-
-	unregister_netdev(dev);
-}
-
 /* Registered in net/core/dev.c */
 struct pernet_operations __net_initdata loopback_net_ops = {
        .init = loopback_net_init,
-       .exit = loopback_net_exit,
 };
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index cc3ed9c..e20fefc 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -845,7 +845,7 @@
 {
 	int i;
 
-	i = request_irq(dev->irq, &i596_interrupt, IRQF_SHARED, dev->name, dev);
+	i = request_irq(dev->irq, i596_interrupt, IRQF_SHARED, dev->name, dev);
 	if (i) {
 		printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
 		return i;
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index 149e0ed..23b633e 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -222,8 +222,8 @@
 		int card_present;
 
 		local_irq_save(flags);
-		card_present = hwreg_present((void*) ioaddr+4)
-		  && hwreg_present((void*) ioaddr + DATA_PORT);
+		card_present = (hwreg_present((void*) ioaddr+4) &&
+				hwreg_present((void*) ioaddr + DATA_PORT));
 		local_irq_restore(flags);
 
 		if (!card_present)
@@ -337,7 +337,7 @@
 	writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
 
 	/* Grab the interrupt */
-	if (request_irq(dev->irq, &net_interrupt, 0, "cs89x0", dev))
+	if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
 		return -EAGAIN;
 
 	/* Set up the IRQ - Apparently magic */
diff --git a/drivers/net/mace.c b/drivers/net/mace.c
index 7d7577b..d9fbad3 100644
--- a/drivers/net/mace.c
+++ b/drivers/net/mace.c
@@ -897,8 +897,8 @@
 	    if (next >= N_RX_RING)
 		next = 0;
 	    np = mp->rx_cmds + next;
-	    if (next != mp->rx_fill
-		&& (ld_le16(&np->xfer_status) & ACTIVE) != 0) {
+	    if (next != mp->rx_fill &&
+		(ld_le16(&np->xfer_status) & ACTIVE) != 0) {
 		printk(KERN_DEBUG "mace: lost a status word\n");
 		++mace_lost_status;
 	    } else
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index b3d7d8d..875d361 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -140,7 +140,7 @@
 
 static int macsonic_open(struct net_device* dev)
 {
-	if (request_irq(dev->irq, &sonic_interrupt, IRQ_FLG_FAST, "sonic", dev)) {
+	if (request_irq(dev->irq, sonic_interrupt, IRQ_FLG_FAST, "sonic", dev)) {
 		printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
@@ -149,7 +149,7 @@
 	 * rupt as well, which must prevent re-entrance of the sonic handler.
 	 */
 	if (dev->irq == IRQ_AUTO_3)
-		if (request_irq(IRQ_NUBUS_9, &macsonic_interrupt, IRQ_FLG_FAST, "sonic", dev)) {
+		if (request_irq(IRQ_NUBUS_9, macsonic_interrupt, IRQ_FLG_FAST, "sonic", dev)) {
 			printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, IRQ_NUBUS_9);
 			free_irq(dev->irq, dev);
 			return -EAGAIN;
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 3aabfd9..21a9c9a 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -29,6 +29,7 @@
 #include <linux/if_link.h>
 #include <linux/if_macvlan.h>
 #include <net/rtnetlink.h>
+#include <net/xfrm.h>
 
 #define MACVLAN_HASH_SIZE	(1 << BITS_PER_BYTE)
 
@@ -38,12 +39,28 @@
 	struct list_head	vlans;
 };
 
+/**
+ *	struct macvlan_rx_stats - MACVLAN percpu rx stats
+ *	@rx_packets: number of received packets
+ *	@rx_bytes: number of received bytes
+ *	@multicast: number of received multicast packets
+ *	@rx_errors: number of errors
+ */
+struct macvlan_rx_stats {
+	unsigned long rx_packets;
+	unsigned long rx_bytes;
+	unsigned long multicast;
+	unsigned long rx_errors;
+};
+
 struct macvlan_dev {
 	struct net_device	*dev;
 	struct list_head	list;
 	struct hlist_node	hlist;
 	struct macvlan_port	*port;
 	struct net_device	*lowerdev;
+	struct macvlan_rx_stats *rx_stats;
+	enum macvlan_mode	mode;
 };
 
 
@@ -101,41 +118,67 @@
 	return 0;
 }
 
+static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
+				    unsigned int len, bool success,
+				    bool multicast)
+{
+	struct macvlan_rx_stats *rx_stats;
+
+	rx_stats = per_cpu_ptr(vlan->rx_stats, smp_processor_id());
+	if (likely(success)) {
+		rx_stats->rx_packets++;;
+		rx_stats->rx_bytes += len;
+		if (multicast)
+			rx_stats->multicast++;
+	} else {
+		rx_stats->rx_errors++;
+	}
+}
+
+static int macvlan_broadcast_one(struct sk_buff *skb, struct net_device *dev,
+				 const struct ethhdr *eth, bool local)
+{
+	if (!skb)
+		return NET_RX_DROP;
+
+	if (local)
+		return dev_forward_skb(dev, skb);
+
+	skb->dev = dev;
+	if (!compare_ether_addr_64bits(eth->h_dest,
+				       dev->broadcast))
+		skb->pkt_type = PACKET_BROADCAST;
+	else
+		skb->pkt_type = PACKET_MULTICAST;
+
+	return netif_rx(skb);
+}
+
 static void macvlan_broadcast(struct sk_buff *skb,
-			      const struct macvlan_port *port)
+			      const struct macvlan_port *port,
+			      struct net_device *src,
+			      enum macvlan_mode mode)
 {
 	const struct ethhdr *eth = eth_hdr(skb);
 	const struct macvlan_dev *vlan;
 	struct hlist_node *n;
-	struct net_device *dev;
 	struct sk_buff *nskb;
 	unsigned int i;
+	int err;
 
 	if (skb->protocol == htons(ETH_P_PAUSE))
 		return;
 
 	for (i = 0; i < MACVLAN_HASH_SIZE; i++) {
 		hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) {
-			dev = vlan->dev;
+			if (vlan->dev == src || !(vlan->mode & mode))
+				continue;
 
 			nskb = skb_clone(skb, GFP_ATOMIC);
-			if (nskb == NULL) {
-				dev->stats.rx_errors++;
-				dev->stats.rx_dropped++;
-				continue;
-			}
-
-			dev->stats.rx_bytes += skb->len + ETH_HLEN;
-			dev->stats.rx_packets++;
-			dev->stats.multicast++;
-
-			nskb->dev = dev;
-			if (!compare_ether_addr_64bits(eth->h_dest, dev->broadcast))
-				nskb->pkt_type = PACKET_BROADCAST;
-			else
-				nskb->pkt_type = PACKET_MULTICAST;
-
-			netif_rx(nskb);
+			err = macvlan_broadcast_one(nskb, vlan->dev, eth,
+					 mode == MACVLAN_MODE_BRIDGE);
+			macvlan_count_rx(vlan, skb->len + ETH_HLEN,
+					 err == NET_RX_SUCCESS, 1);
 		}
 	}
 }
@@ -146,14 +189,34 @@
 	const struct ethhdr *eth = eth_hdr(skb);
 	const struct macvlan_port *port;
 	const struct macvlan_dev *vlan;
+	const struct macvlan_dev *src;
 	struct net_device *dev;
+	unsigned int len;
 
 	port = rcu_dereference(skb->dev->macvlan_port);
 	if (port == NULL)
 		return skb;
 
 	if (is_multicast_ether_addr(eth->h_dest)) {
-		macvlan_broadcast(skb, port);
+		src = macvlan_hash_lookup(port, eth->h_source);
+		if (!src)
+			/* frame comes from an external address */
+			macvlan_broadcast(skb, port, NULL,
+					  MACVLAN_MODE_PRIVATE |
+					  MACVLAN_MODE_VEPA    |
+					  MACVLAN_MODE_BRIDGE);
+		else if (src->mode == MACVLAN_MODE_VEPA)
+			/* flood to everyone except source */
+			macvlan_broadcast(skb, port, src->dev,
+					  MACVLAN_MODE_VEPA |
+					  MACVLAN_MODE_BRIDGE);
+		else if (src->mode == MACVLAN_MODE_BRIDGE)
+			/*
+			 * flood only to VEPA ports, bridge ports
+			 * already saw the frame on the way out.
+			 */
+			macvlan_broadcast(skb, port, src->dev,
+					  MACVLAN_MODE_VEPA);
 		return skb;
 	}
 
@@ -166,16 +229,11 @@
 		kfree_skb(skb);
 		return NULL;
 	}
-
+	len = skb->len + ETH_HLEN;
 	skb = skb_share_check(skb, GFP_ATOMIC);
-	if (skb == NULL) {
-		dev->stats.rx_errors++;
-		dev->stats.rx_dropped++;
+	macvlan_count_rx(vlan, len, skb != NULL, 0);
+	if (!skb)
 		return NULL;
-	}
-
-	dev->stats.rx_bytes += skb->len + ETH_HLEN;
-	dev->stats.rx_packets++;
 
 	skb->dev = dev;
 	skb->pkt_type = PACKET_HOST;
@@ -184,25 +242,53 @@
 	return NULL;
 }
 
+static int macvlan_queue_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	const struct macvlan_dev *vlan = netdev_priv(dev);
+	const struct macvlan_port *port = vlan->port;
+	const struct macvlan_dev *dest;
+
+	if (vlan->mode == MACVLAN_MODE_BRIDGE) {
+		const struct ethhdr *eth = (void *)skb->data;
+
+		/* send to other bridge ports directly */
+		if (is_multicast_ether_addr(eth->h_dest)) {
+			macvlan_broadcast(skb, port, dev, MACVLAN_MODE_BRIDGE);
+			goto xmit_world;
+		}
+
+		dest = macvlan_hash_lookup(port, eth->h_dest);
+		if (dest && dest->mode == MACVLAN_MODE_BRIDGE) {
+			unsigned int length = skb->len + ETH_HLEN;
+			int ret = dev_forward_skb(dest->dev, skb);
+			macvlan_count_rx(dest, length,
+					 ret == NET_RX_SUCCESS, 0);
+
+			return NET_XMIT_SUCCESS;
+		}
+	}
+
+xmit_world:
+	skb->dev = vlan->lowerdev;
+	return dev_queue_xmit(skb);
+}
+
 static netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
 				      struct net_device *dev)
 {
 	int i = skb_get_queue_mapping(skb);
 	struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-	const struct macvlan_dev *vlan = netdev_priv(dev);
 	unsigned int len = skb->len;
 	int ret;
 
-	skb->dev = vlan->lowerdev;
-	ret = dev_queue_xmit(skb);
-
+	ret = macvlan_queue_xmit(skb, dev);
 	if (likely(ret == NET_XMIT_SUCCESS)) {
 		txq->tx_packets++;
 		txq->tx_bytes += len;
 	} else
 		txq->tx_dropped++;
 
-	return NETDEV_TX_OK;
+	return ret;
 }
 
 static int macvlan_hard_header(struct sk_buff *skb, struct net_device *dev,
@@ -360,14 +446,53 @@
 	dev->state		= (dev->state & ~MACVLAN_STATE_MASK) |
 				  (lowerdev->state & MACVLAN_STATE_MASK);
 	dev->features 		= lowerdev->features & MACVLAN_FEATURES;
+	dev->gso_max_size	= lowerdev->gso_max_size;
 	dev->iflink		= lowerdev->ifindex;
 	dev->hard_header_len	= lowerdev->hard_header_len;
 
 	macvlan_set_lockdep_class(dev);
 
+	vlan->rx_stats = alloc_percpu(struct macvlan_rx_stats);
+	if (!vlan->rx_stats)
+		return -ENOMEM;
+
 	return 0;
 }
 
+static void macvlan_uninit(struct net_device *dev)
+{
+	struct macvlan_dev *vlan = netdev_priv(dev);
+
+	free_percpu(vlan->rx_stats);
+}
+
+static struct net_device_stats *macvlan_dev_get_stats(struct net_device *dev)
+{
+	struct net_device_stats *stats = &dev->stats;
+	struct macvlan_dev *vlan = netdev_priv(dev);
+
+	dev_txq_stats_fold(dev, stats);
+
+	if (vlan->rx_stats) {
+		struct macvlan_rx_stats *p, rx = {0};
+		int i;
+
+		for_each_possible_cpu(i) {
+			p = per_cpu_ptr(vlan->rx_stats, i);
+			rx.rx_packets += p->rx_packets;
+			rx.rx_bytes   += p->rx_bytes;
+			rx.rx_errors  += p->rx_errors;
+			rx.multicast  += p->multicast;
+		}
+		stats->rx_packets = rx.rx_packets;
+		stats->rx_bytes   = rx.rx_bytes;
+		stats->rx_errors  = rx.rx_errors;
+		stats->rx_dropped = rx.rx_errors;
+		stats->multicast  = rx.multicast;
+	}
+	return stats;
+}
+
 static void macvlan_ethtool_get_drvinfo(struct net_device *dev,
 					struct ethtool_drvinfo *drvinfo)
 {
@@ -404,6 +529,7 @@
 
 static const struct net_device_ops macvlan_netdev_ops = {
 	.ndo_init		= macvlan_init,
+	.ndo_uninit		= macvlan_uninit,
 	.ndo_open		= macvlan_open,
 	.ndo_stop		= macvlan_stop,
 	.ndo_start_xmit		= macvlan_start_xmit,
@@ -411,6 +537,7 @@
 	.ndo_change_rx_flags	= macvlan_change_rx_flags,
 	.ndo_set_mac_address	= macvlan_set_mac_address,
 	.ndo_set_multicast_list	= macvlan_set_multicast_list,
+	.ndo_get_stats		= macvlan_dev_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
@@ -455,25 +582,6 @@
 	kfree(port);
 }
 
-static void macvlan_transfer_operstate(struct net_device *dev)
-{
-	struct macvlan_dev *vlan = netdev_priv(dev);
-	const struct net_device *lowerdev = vlan->lowerdev;
-
-	if (lowerdev->operstate == IF_OPER_DORMANT)
-		netif_dormant_on(dev);
-	else
-		netif_dormant_off(dev);
-
-	if (netif_carrier_ok(lowerdev)) {
-		if (!netif_carrier_ok(dev))
-			netif_carrier_on(dev);
-	} else {
-		if (netif_carrier_ok(dev))
-			netif_carrier_off(dev);
-	}
-}
-
 static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
 {
 	if (tb[IFLA_ADDRESS]) {
@@ -482,6 +590,17 @@
 		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
 			return -EADDRNOTAVAIL;
 	}
+
+	if (data && data[IFLA_MACVLAN_MODE]) {
+		switch (nla_get_u32(data[IFLA_MACVLAN_MODE])) {
+		case MACVLAN_MODE_PRIVATE:
+		case MACVLAN_MODE_VEPA:
+		case MACVLAN_MODE_BRIDGE:
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
 	return 0;
 }
 
@@ -504,7 +623,7 @@
 	return 0;
 }
 
-static int macvlan_newlink(struct net_device *dev,
+static int macvlan_newlink(struct net *src_net, struct net_device *dev,
 			   struct nlattr *tb[], struct nlattr *data[])
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
@@ -515,7 +634,7 @@
 	if (!tb[IFLA_LINK])
 		return -EINVAL;
 
-	lowerdev = __dev_get_by_index(dev_net(dev), nla_get_u32(tb[IFLA_LINK]));
+	lowerdev = __dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
 	if (lowerdev == NULL)
 		return -ENODEV;
 
@@ -546,27 +665,61 @@
 	vlan->dev      = dev;
 	vlan->port     = port;
 
+	vlan->mode     = MACVLAN_MODE_VEPA;
+	if (data && data[IFLA_MACVLAN_MODE])
+		vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]);
+
 	err = register_netdevice(dev);
 	if (err < 0)
 		return err;
 
 	list_add_tail(&vlan->list, &port->vlans);
-	macvlan_transfer_operstate(dev);
+	netif_stacked_transfer_operstate(lowerdev, dev);
 	return 0;
 }
 
-static void macvlan_dellink(struct net_device *dev)
+static void macvlan_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 	struct macvlan_port *port = vlan->port;
 
 	list_del(&vlan->list);
-	unregister_netdevice(dev);
+	unregister_netdevice_queue(dev, head);
 
 	if (list_empty(&port->vlans))
 		macvlan_port_destroy(port->dev);
 }
 
+static int macvlan_changelink(struct net_device *dev,
+		struct nlattr *tb[], struct nlattr *data[])
+{
+	struct macvlan_dev *vlan = netdev_priv(dev);
+	if (data && data[IFLA_MACVLAN_MODE])
+		vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]);
+	return 0;
+}
+
+static size_t macvlan_get_size(const struct net_device *dev)
+{
+	return nla_total_size(4);
+}
+
+static int macvlan_fill_info(struct sk_buff *skb,
+				const struct net_device *dev)
+{
+	struct macvlan_dev *vlan = netdev_priv(dev);
+
+	NLA_PUT_U32(skb, IFLA_MACVLAN_MODE, vlan->mode);
+	return 0;
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+static const struct nla_policy macvlan_policy[IFLA_MACVLAN_MAX + 1] = {
+	[IFLA_MACVLAN_MODE] = { .type = NLA_U32 },
+};
+
 static struct rtnl_link_ops macvlan_link_ops __read_mostly = {
 	.kind		= "macvlan",
 	.priv_size	= sizeof(struct macvlan_dev),
@@ -575,6 +728,11 @@
 	.validate	= macvlan_validate,
 	.newlink	= macvlan_newlink,
 	.dellink	= macvlan_dellink,
+	.maxtype	= IFLA_MACVLAN_MAX,
+	.policy		= macvlan_policy,
+	.changelink	= macvlan_changelink,
+	.get_size	= macvlan_get_size,
+	.fill_info	= macvlan_fill_info,
 };
 
 static int macvlan_device_event(struct notifier_block *unused,
@@ -591,17 +749,19 @@
 	switch (event) {
 	case NETDEV_CHANGE:
 		list_for_each_entry(vlan, &port->vlans, list)
-			macvlan_transfer_operstate(vlan->dev);
+			netif_stacked_transfer_operstate(vlan->lowerdev,
+							 vlan->dev);
 		break;
 	case NETDEV_FEAT_CHANGE:
 		list_for_each_entry(vlan, &port->vlans, list) {
 			vlan->dev->features = dev->features & MACVLAN_FEATURES;
+			vlan->dev->gso_max_size = dev->gso_max_size;
 			netdev_features_change(vlan->dev);
 		}
 		break;
 	case NETDEV_UNREGISTER:
 		list_for_each_entry_safe(vlan, next, &port->vlans, list)
-			macvlan_dellink(vlan->dev);
+			macvlan_dellink(vlan->dev, NULL);
 		break;
 	}
 	return NOTIFY_DONE;
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index 21f8754..e85bf04 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -162,6 +162,10 @@
 		result |= ADVERTISED_100baseT_Half;
 	if (reg & ADVERTISE_100FULL)
 		result |= ADVERTISED_100baseT_Full;
+	if (reg & ADVERTISE_PAUSE_CAP)
+		result |= ADVERTISED_Pause;
+	if (reg & ADVERTISE_PAUSE_ASYM)
+		result |= ADVERTISED_Asym_Pause;
 	return result;
 }
 
@@ -344,11 +348,9 @@
 
 	old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 				  MDIO_AN_ADVERTISE);
-	adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-	if (ecmd->autoneg)
-		adv |= mii_advertise_flowctrl(
-			(ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
-			(ecmd->tx_pause ? FLOW_CTRL_TX : 0));
+	adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) |
+	       mii_advertise_flowctrl((ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
+				      (ecmd->tx_pause ? FLOW_CTRL_TX : 0)));
 	if (adv != old_adv) {
 		mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 				 MDIO_AN_ADVERTISE, adv);
diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
index 8ea98bd..8e9704f 100644
--- a/drivers/net/mipsnet.c
+++ b/drivers/net/mipsnet.c
@@ -211,7 +211,7 @@
 {
 	int err;
 
-	err = request_irq(dev->irq, &mipsnet_interrupt,
+	err = request_irq(dev->irq, mipsnet_interrupt,
 			  IRQF_SHARED, dev->name, (void *) dev);
 	if (err) {
 		release_region(dev->base_addr, sizeof(struct mipsnet_regs));
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index b62e61d..796a493 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -849,7 +849,7 @@
 	return 0;
 }
 
-static int mv643xx_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t mv643xx_eth_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct mv643xx_eth_private *mp = netdev_priv(dev);
 	int queue;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f362451..d389219 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -207,7 +207,6 @@
 	int big_bytes;
 	int max_intr_slots;
 	struct net_device *dev;
-	struct net_device_stats stats;
 	spinlock_t stats_lock;
 	u8 __iomem *sram;
 	int sram_size;
@@ -264,6 +263,10 @@
 static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
+MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
+MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
+MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
+MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
 
 static char *myri10ge_fw_name = NULL;
 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
@@ -407,8 +410,8 @@
 		 * and try to get the completion quickly
 		 * (1ms will be enough for those commands) */
 		for (sleep_total = 0;
-		     sleep_total < 1000
-		     && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
+		     sleep_total < 1000 &&
+		     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 		     sleep_total += 10) {
 			udelay(10);
 			mb();
@@ -416,8 +419,8 @@
 	} else {
 		/* use msleep for most command */
 		for (sleep_total = 0;
-		     sleep_total < 15
-		     && response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
+		     sleep_total < 15 &&
+		     response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
 		     sleep_total++)
 			msleep(1);
 	}
@@ -554,8 +557,8 @@
 	sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
 	       &mgp->fw_ver_minor, &mgp->fw_ver_tiny);
 
-	if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR
-	      && mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
+	if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR &&
+	      mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
 		dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
 		dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
 			MXGEFW_VERSION_MINOR);
@@ -1409,8 +1412,8 @@
 	}
 
 	/* start the queue if we've stopped it */
-	if (netif_tx_queue_stopped(dev_queue)
-	    && tx->req - tx->done < (tx->mask >> 1)) {
+	if (netif_tx_queue_stopped(dev_queue) &&
+	    tx->req - tx->done < (tx->mask >> 1)) {
 		tx->wake_queue++;
 		netif_tx_wake_queue(dev_queue);
 	}
@@ -1832,7 +1835,7 @@
 	/* force stats update */
 	(void)myri10ge_get_stats(netdev);
 	for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
-		data[i] = ((unsigned long *)&mgp->stats)[i];
+		data[i] = ((unsigned long *)&netdev->stats)[i];
 
 	data[i++] = (unsigned int)mgp->tx_boundary;
 	data[i++] = (unsigned int)mgp->wc_enabled;
@@ -3002,7 +3005,7 @@
 {
 	struct myri10ge_priv *mgp = netdev_priv(dev);
 	struct myri10ge_slice_netstats *slice_stats;
-	struct net_device_stats *stats = &mgp->stats;
+	struct net_device_stats *stats = &dev->stats;
 	int i;
 
 	spin_lock(&mgp->stats_lock);
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index 29ebebc..b3513ad 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -1084,7 +1084,7 @@
 
 	/* Register interrupt handler now. */
 	DET(("Requesting MYRIcom IRQ line.\n"));
-	if (request_irq(dev->irq, &myri_interrupt,
+	if (request_irq(dev->irq, myri_interrupt,
 			IRQF_SHARED, "MyriCOM Ethernet", (void *) dev)) {
 		printk("MyriCOM: Cannot register interrupt handler.\n");
 		goto err;
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index b2722c4..797fe16 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -683,8 +683,8 @@
         /* Find out the new setting */
         if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
                 new_setting = 1;
-        else if (!strncmp("off", buf, count - 1)
-                 || !strncmp("0", buf, count - 1))
+        else if (!strncmp("off", buf, count - 1) ||
+                 !strncmp("0", buf, count - 1))
 		new_setting = 0;
 	else
                  return count;
@@ -757,8 +757,8 @@
 	np->autoneg    = (tmp & BMCR_ANENABLE)? AUTONEG_ENABLE: AUTONEG_DISABLE;
 	np->advertising= mdio_read(dev, MII_ADVERTISE);
 
-	if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL
-	 && netif_msg_probe(np)) {
+	if ((np->advertising & ADVERTISE_ALL) != ADVERTISE_ALL &&
+	    netif_msg_probe(np)) {
 		printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
 			"10%s %s duplex.\n",
 			pci_name(np->pci_dev),
@@ -1153,8 +1153,8 @@
 	tmp = mdio_read(dev, MII_BMCR);
 	if (np->autoneg == AUTONEG_ENABLE) {
 		/* renegotiate if something changed */
-		if ((tmp & BMCR_ANENABLE) == 0
-		 || np->advertising != mdio_read(dev, MII_ADVERTISE))
+		if ((tmp & BMCR_ANENABLE) == 0 ||
+		    np->advertising != mdio_read(dev, MII_ADVERTISE))
 		{
 			/* turn on autonegotiation and force negotiation */
 			tmp |= (BMCR_ANENABLE | BMCR_ANRESTART);
@@ -1535,7 +1535,7 @@
 	/* Reset the chip, just in case. */
 	natsemi_reset(dev);
 
-	i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
+	i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
 	if (i) return i;
 
 	if (netif_msg_ifup(np))
@@ -2164,8 +2164,8 @@
 		dev_kfree_skb_irq(np->tx_skbuff[entry]);
 		np->tx_skbuff[entry] = NULL;
 	}
-	if (netif_queue_stopped(dev)
-		&& np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
+	if (netif_queue_stopped(dev) &&
+	    np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) {
 		/* The ring is no longer full, wake queue. */
 		netif_wake_queue(dev);
 	}
@@ -2343,8 +2343,8 @@
 			/* Omit CRC size. */
 			/* Check if the packet is long enough to accept
 			 * without copying to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak
-			    && (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) {
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + RX_OFFSET)) != NULL) {
 				/* 16 byte align the IP header */
 				skb_reserve(skb, RX_OFFSET);
 				pci_dma_sync_single_for_cpu(np->pci_dev,
@@ -2390,8 +2390,8 @@
 	spin_lock(&np->lock);
 	if (intr_status & LinkChange) {
 		u16 lpa = mdio_read(dev, MII_LPA);
-		if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE
-		 && netif_msg_link(np)) {
+		if (mdio_read(dev, MII_BMCR) & BMCR_ANENABLE &&
+		    netif_msg_link(np)) {
 			printk(KERN_INFO
 				"%s: Autonegotiation advertising"
 				" %#04x  partner %#04x.\n", dev->name,
@@ -2488,8 +2488,8 @@
 	if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
 		rx_mode = RxFilterEnable | AcceptBroadcast
 			| AcceptAllMulticast | AcceptAllPhys | AcceptMyPhys;
-	} else if ((dev->mc_count > multicast_filter_limit)
-	  || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		rx_mode = RxFilterEnable | AcceptBroadcast
 			| AcceptAllMulticast | AcceptMyPhys;
 	} else {
diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c
index 9f42354..6477029 100644
--- a/drivers/net/netx-eth.c
+++ b/drivers/net/netx-eth.c
@@ -212,7 +212,7 @@
 	struct netx_eth_priv *priv = netdev_priv(ndev);
 
 	if (request_irq
-	    (ndev->irq, &netx_eth_interrupt, IRQF_SHARED, ndev->name, ndev))
+	    (ndev->irq, netx_eth_interrupt, IRQF_SHARED, ndev->name, ndev))
 		return -EAGAIN;
 
 	writel(ndev->dev_addr[0] |
@@ -510,3 +510,6 @@
 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" CARDNAME);
+MODULE_FIRMWARE("xc0.bin");
+MODULE_FIRMWARE("xc1.bin");
+MODULE_FIRMWARE("xc2.bin");
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 7384f59..76cd1f3 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -53,8 +53,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 50
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.50"
+#define _NETXEN_NIC_LINUX_SUBVERSION 65
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.65"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
 #define _major(v)	(((v) >> 24) & 0xff)
@@ -74,8 +74,6 @@
 #define NETXEN_FLASH_TOTAL_SIZE  (NETXEN_NUM_FLASH_SECTORS \
 					* NETXEN_FLASH_SECTOR_SIZE)
 
-#define PHAN_VENDOR_ID 0x4040
-
 #define RCV_DESC_RINGSIZE(rds_ring)	\
 	(sizeof(struct rcv_desc) * (rds_ring)->num_desc)
 #define RCV_BUFF_RINGSIZE(rds_ring)	\
@@ -117,9 +115,11 @@
 #define NX_P3_B0		0x40
 #define NX_P3_B1		0x41
 #define NX_P3_B2		0x42
+#define NX_P3P_A0		0x50
 
 #define NX_IS_REVISION_P2(REVISION)     (REVISION <= NX_P2_C1)
 #define NX_IS_REVISION_P3(REVISION)     (REVISION >= NX_P3_A0)
+#define NX_IS_REVISION_P3P(REVISION)     (REVISION >= NX_P3P_A0)
 
 #define FIRST_PAGE_GROUP_START	0
 #define FIRST_PAGE_GROUP_END	0x100000
@@ -419,6 +419,34 @@
 	__le64 status_desc_data[2];
 } __attribute__ ((aligned(16)));
 
+/* UNIFIED ROMIMAGE *************************/
+#define NX_UNI_FW_MIN_SIZE		0x3eb000
+#define NX_UNI_DIR_SECT_PRODUCT_TBL	0x0
+#define NX_UNI_DIR_SECT_BOOTLD		0x6
+#define NX_UNI_DIR_SECT_FW		0x7
+
+/*Offsets */
+#define NX_UNI_CHIP_REV_OFF		10
+#define NX_UNI_FLAGS_OFF		11
+#define NX_UNI_BIOS_VERSION_OFF 	12
+#define NX_UNI_BOOTLD_IDX_OFF		27
+#define NX_UNI_FIRMWARE_IDX_OFF 	29
+
+struct uni_table_desc{
+	uint32_t	findex;
+	uint32_t	num_entries;
+	uint32_t	entry_size;
+	uint32_t	reserved[5];
+};
+
+struct uni_data_desc{
+	uint32_t	findex;
+	uint32_t	size;
+	uint32_t	reserved[5];
+};
+
+/* UNIFIED ROMIMAGE *************************/
+
 /* The version of the main data structure */
 #define	NETXEN_BDINFO_VERSION 1
 
@@ -485,7 +513,15 @@
 #define NX_P2_MN_ROMIMAGE	0
 #define NX_P3_CT_ROMIMAGE	1
 #define NX_P3_MN_ROMIMAGE	2
-#define NX_FLASH_ROMIMAGE	3
+#define NX_UNIFIED_ROMIMAGE	3
+#define NX_FLASH_ROMIMAGE	4
+#define NX_UNKNOWN_ROMIMAGE	0xff
+
+#define NX_P2_MN_ROMIMAGE_NAME		"nxromimg.bin"
+#define NX_P3_CT_ROMIMAGE_NAME		"nx3fwct.bin"
+#define NX_P3_MN_ROMIMAGE_NAME		"nx3fwmn.bin"
+#define NX_UNIFIED_ROMIMAGE_NAME	"phanfw.bin"
+#define NX_FLASH_ROMIMAGE_NAME		"flash"
 
 extern char netxen_nic_driver_name[];
 
@@ -543,13 +579,16 @@
 	void __iomem *pci_base1;
 	void __iomem *pci_base2;
 	void __iomem *db_base;
+	void __iomem *ocm_win_crb;
+
 	unsigned long db_len;
 	unsigned long pci_len0;
 
-	int qdr_sn_window;
-	int ddr_mn_window;
-	u32 mn_win_crb;
-	u32 ms_win_crb;
+	u32 ocm_win;
+	u32 crb_win;
+
+	rwlock_t crb_lock;
+	spinlock_t mem_lock;
 
 	u8 cut_through;
 	u8 revision_id;
@@ -1039,6 +1078,9 @@
 #define LINKEVENT_LINKSPEED_MBPS	0
 #define LINKEVENT_LINKSPEED_ENCODED	1
 
+#define AUTO_FW_RESET_ENABLED	0xEF10AF12
+#define AUTO_FW_RESET_DISABLED	0xDCBAAF12
+
 /* firmware response header:
  *	63:58 - message type
  *	57:56 - owner
@@ -1086,6 +1128,7 @@
 #define NETXEN_NIC_MSIX_ENABLED		0x04
 #define NETXEN_NIC_LRO_ENABLED		0x08
 #define NETXEN_NIC_BRIDGE_ENABLED       0X10
+#define NETXEN_NIC_DIAG_ENABLED		0x20
 #define NETXEN_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
 
@@ -1115,10 +1158,6 @@
 	struct pci_dev *pdev;
 	struct list_head mac_list;
 
-	u32 curr_window;
-	u32 crb_win;
-	rwlock_t adapter_lock;
-
 	spinlock_t tx_clean_lock;
 
 	u16 num_txd;
@@ -1163,6 +1202,8 @@
 	u32 int_vec_bit;
 	u32 heartbit;
 
+	u8 mac_addr[ETH_ALEN];
+
 	struct netxen_adapter_stats stats;
 
 	struct netxen_recv_context recv_ctx;
@@ -1180,11 +1221,10 @@
 	u32 (*crb_read)(struct netxen_adapter *, ulong);
 	int (*crb_write)(struct netxen_adapter *, ulong, u32);
 
-	int (*pci_mem_read)(struct netxen_adapter *, u64, void *, int);
-	int (*pci_mem_write)(struct netxen_adapter *, u64, void *, int);
+	int (*pci_mem_read)(struct netxen_adapter *, u64, u64 *);
+	int (*pci_mem_write)(struct netxen_adapter *, u64, u64);
 
-	unsigned long (*pci_set_window)(struct netxen_adapter *,
-			unsigned long long);
+	int (*pci_set_window)(struct netxen_adapter *, u64, u32 *);
 
 	u32 (*io_read)(struct netxen_adapter *, void __iomem *);
 	void (*io_write)(struct netxen_adapter *, void __iomem *, u32);
@@ -1203,12 +1243,10 @@
 
 	struct work_struct  tx_timeout_task;
 
-	struct net_device_stats net_stats;
-
 	nx_nic_intr_coalesce_t coal;
 
 	unsigned long state;
-	u32 resv5;
+	__le32 file_prd_off;	/*File fw product offset*/
 	u32 fw_version;
 	const struct firmware *fw;
 };
@@ -1271,7 +1309,7 @@
 int netxen_need_fw_reset(struct netxen_adapter *adapter);
 void netxen_request_firmware(struct netxen_adapter *adapter);
 void netxen_release_firmware(struct netxen_adapter *adapter);
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
+int netxen_pinit_from_rom(struct netxen_adapter *adapter);
 
 int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
 int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 714f387..ddd704ae 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -85,11 +85,9 @@
 
 	strncpy(drvinfo->driver, netxen_nic_driver_name, 32);
 	strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32);
-	read_lock(&adapter->adapter_lock);
 	fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
 	fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
 	fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
-	read_unlock(&adapter->adapter_lock);
 	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
 
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
@@ -259,18 +257,18 @@
 	/* read which mode */
 	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
 		/* autonegotiation */
-		if (adapter->phy_write
-		    && adapter->phy_write(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
-					  ecmd->autoneg) != 0)
+		if (adapter->phy_write &&
+		    adapter->phy_write(adapter,
+				       NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
+				       ecmd->autoneg) != 0)
 			return -EIO;
 		else
 			adapter->link_autoneg = ecmd->autoneg;
 
-		if (adapter->phy_read
-		    && adapter->phy_read(adapter,
-					 NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-					 &status) != 0)
+		if (adapter->phy_read &&
+		    adapter->phy_read(adapter,
+				      NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+				      &status) != 0)
 			return -EIO;
 
 		/* speed */
@@ -290,10 +288,10 @@
 			netxen_clear_phy_duplex(status);
 		if (ecmd->duplex == DUPLEX_FULL)
 			netxen_set_phy_duplex(status);
-		if (adapter->phy_write
-		    && adapter->phy_write(adapter,
-					  NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-					  *((int *)&status)) != 0)
+		if (adapter->phy_write &&
+		    adapter->phy_write(adapter,
+				       NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+				       *((int *)&status)) != 0)
 			return -EIO;
 		else {
 			adapter->link_speed = ecmd->speed;
@@ -444,10 +442,10 @@
 
 	/* read which mode */
 	if (adapter->ahw.port_type == NETXEN_NIC_GBE) {
-		if (adapter->phy_read
-		    && adapter->phy_read(adapter,
-					 NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-					 &status) != 0)
+		if (adapter->phy_read &&
+		    adapter->phy_read(adapter,
+				      NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+				      &status) != 0)
 			return -EIO;
 		else {
 			val = netxen_get_phy_link(status);
@@ -690,8 +688,8 @@
 	u32 data_read, data_written;
 
 	data_read = NXRD32(adapter, NETXEN_PCIX_PH_REG(0));
-	if ((data_read & 0xffff) != PHAN_VENDOR_ID)
-	return 1;
+	if ((data_read & 0xffff) != adapter->pdev->vendor)
+		return 1;
 
 	data_written = (u32)0xa5a5a5a5;
 
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 1c46da6..d138fc2 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -545,6 +545,8 @@
 #define	NETXEN_NIU_TEST_MUX_CTL		(NETXEN_CRB_NIU + 0x00094)
 #define	NETXEN_NIU_XG_PAUSE_CTL		(NETXEN_CRB_NIU + 0x00098)
 #define	NETXEN_NIU_XG_PAUSE_LEVEL	(NETXEN_CRB_NIU + 0x000dc)
+#define	NETXEN_NIU_FRAME_COUNT_SELECT	(NETXEN_CRB_NIU + 0x000ac)
+#define	NETXEN_NIU_FRAME_COUNT		(NETXEN_CRB_NIU + 0x000b0)
 #define	NETXEN_NIU_XG_SEL		(NETXEN_CRB_NIU + 0x00128)
 #define NETXEN_NIU_GB_PAUSE_CTL		(NETXEN_CRB_NIU + 0x0030c)
 
@@ -662,40 +664,51 @@
 #define NETXEN_NIU_AP_STATION_ADDR_0(I)    (NETXEN_CRB_NIU+0xa0040+(I)*0x10000)
 #define NETXEN_NIU_AP_STATION_ADDR_1(I)    (NETXEN_CRB_NIU+0xa0044+(I)*0x10000)
 
+
+#define TEST_AGT_CTRL	(0x00)
+
+#define TA_CTL_START	1
+#define TA_CTL_ENABLE	2
+#define TA_CTL_WRITE	4
+#define TA_CTL_BUSY	8
+
 /*
  *   Register offsets for MN
  */
-#define	MIU_CONTROL	       (0x000)
-#define MIU_TEST_AGT_CTRL      (0x090)
-#define MIU_TEST_AGT_ADDR_LO   (0x094)
-#define MIU_TEST_AGT_ADDR_HI   (0x098)
-#define MIU_TEST_AGT_WRDATA_LO (0x0a0)
-#define MIU_TEST_AGT_WRDATA_HI (0x0a4)
-#define MIU_TEST_AGT_WRDATA(i) (0x0a0+(4*(i)))
-#define MIU_TEST_AGT_RDDATA_LO (0x0a8)
-#define MIU_TEST_AGT_RDDATA_HI (0x0ac)
-#define MIU_TEST_AGT_RDDATA(i) (0x0a8+(4*(i)))
-#define MIU_TEST_AGT_ADDR_MASK 0xfffffff8
-#define MIU_TEST_AGT_UPPER_ADDR(off) (0)
+#define MIU_TEST_AGT_BASE		(0x90)
 
-/* MIU_TEST_AGT_CTRL flags. work for SIU as well */
-#define MIU_TA_CTL_START        1
-#define MIU_TA_CTL_ENABLE       2
-#define MIU_TA_CTL_WRITE        4
-#define MIU_TA_CTL_BUSY         8
+#define MIU_TEST_AGT_ADDR_LO		(0x04)
+#define MIU_TEST_AGT_ADDR_HI		(0x08)
+#define MIU_TEST_AGT_WRDATA_LO		(0x10)
+#define MIU_TEST_AGT_WRDATA_HI		(0x14)
+#define MIU_TEST_AGT_WRDATA_UPPER_LO	(0x20)
+#define MIU_TEST_AGT_WRDATA_UPPER_HI	(0x24)
+#define MIU_TEST_AGT_WRDATA(i)		(0x10+(0x10*((i)>>1))+(4*((i)&1)))
+#define MIU_TEST_AGT_RDDATA_LO		(0x18)
+#define MIU_TEST_AGT_RDDATA_HI		(0x1c)
+#define MIU_TEST_AGT_RDDATA_UPPER_LO	(0x28)
+#define MIU_TEST_AGT_RDDATA_UPPER_HI	(0x2c)
+#define MIU_TEST_AGT_RDDATA(i)		(0x18+(0x10*((i)>>1))+(4*((i)&1)))
 
-#define SIU_TEST_AGT_CTRL      (0x060)
-#define SIU_TEST_AGT_ADDR_LO   (0x064)
-#define SIU_TEST_AGT_ADDR_HI   (0x078)
-#define SIU_TEST_AGT_WRDATA_LO (0x068)
-#define SIU_TEST_AGT_WRDATA_HI (0x06c)
-#define SIU_TEST_AGT_WRDATA(i) (0x068+(4*(i)))
-#define SIU_TEST_AGT_RDDATA_LO (0x070)
-#define SIU_TEST_AGT_RDDATA_HI (0x074)
-#define SIU_TEST_AGT_RDDATA(i) (0x070+(4*(i)))
+#define MIU_TEST_AGT_ADDR_MASK		0xfffffff8
+#define MIU_TEST_AGT_UPPER_ADDR(off)	(0)
 
-#define SIU_TEST_AGT_ADDR_MASK 0x3ffff8
-#define SIU_TEST_AGT_UPPER_ADDR(off) ((off)>>22)
+/*
+ *   Register offsets for MS
+ */
+#define SIU_TEST_AGT_BASE		(0x60)
+
+#define SIU_TEST_AGT_ADDR_LO		(0x04)
+#define SIU_TEST_AGT_ADDR_HI		(0x18)
+#define SIU_TEST_AGT_WRDATA_LO		(0x08)
+#define SIU_TEST_AGT_WRDATA_HI		(0x0c)
+#define SIU_TEST_AGT_WRDATA(i)		(0x08+(4*(i)))
+#define SIU_TEST_AGT_RDDATA_LO		(0x10)
+#define SIU_TEST_AGT_RDDATA_HI		(0x14)
+#define SIU_TEST_AGT_RDDATA(i)		(0x10+(4*(i)))
+
+#define SIU_TEST_AGT_ADDR_MASK		0x3ffff8
+#define SIU_TEST_AGT_UPPER_ADDR(off)	((off)>>22)
 
 /* XG Link status */
 #define XG_LINK_UP	0x10
@@ -857,6 +870,9 @@
 		(PCIX_SN_WINDOW_F0 + (0x20 * (func))) :\
 		(PCIX_SN_WINDOW_F4 + (0x10 * ((func)-4))))
 
+#define PCIX_OCM_WINDOW		(0x10800)
+#define PCIX_OCM_WINDOW_REG(func)	(PCIX_OCM_WINDOW + 0x20 * (func))
+
 #define PCIX_TARGET_STATUS	(0x10118)
 #define PCIX_TARGET_STATUS_F1	(0x10160)
 #define PCIX_TARGET_STATUS_F2	(0x10164)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 3185a98..2e364fe 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -31,6 +31,7 @@
 #define MASK(n) ((1ULL<<(n))-1)
 #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
 #define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
+#define OCM_WIN_P3P(addr) (addr & 0xffc0000)
 #define MS_WIN(addr) (addr & 0x0ffc0000)
 
 #define GET_MEM_OFFS_2M(addr) (addr & MASK(18))
@@ -41,6 +42,11 @@
 #define CRB_HI(off)	((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000))
 #define CRB_INDIRECT_2M	(0x1e0000UL)
 
+static void netxen_nic_io_write_128M(struct netxen_adapter *adapter,
+		void __iomem *addr, u32 data);
+static u32 netxen_nic_io_read_128M(struct netxen_adapter *adapter,
+		void __iomem *addr);
+
 #ifndef readq
 static inline u64 readq(void __iomem *addr)
 {
@@ -326,7 +332,7 @@
 		if (done == 1)
 			break;
 		if (++timeout >= NETXEN_PCIE_SEM_TIMEOUT)
-			return -1;
+			return -EIO;
 		msleep(1);
 	}
 
@@ -383,24 +389,51 @@
 
 int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 {
-	__u32 reg;
+	u32 mac_cfg;
+	u32 cnt = 0;
+	__u32 reg = 0x0200;
 	u32 port = adapter->physical_port;
+	u16 board_type = adapter->ahw.board_type;
 
 	if (port > NETXEN_NIU_MAX_XG_PORTS)
 		return -EINVAL;
 
-	reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
-	if (mode == NETXEN_NIU_PROMISC_MODE)
-		reg = (reg | 0x2000UL);
-	else
-		reg = (reg & ~0x2000UL);
+	mac_cfg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port));
+	mac_cfg &= ~0x4;
+	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg);
 
-	if (mode == NETXEN_NIU_ALLMULTI_MODE)
-		reg = (reg | 0x1000UL);
-	else
-		reg = (reg & ~0x1000UL);
+	if ((board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) ||
+			(board_type == NETXEN_BRDTYPE_P2_SB31_10G_HMEZ))
+		reg = (0x20 << port);
 
-	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+	NXWR32(adapter, NETXEN_NIU_FRAME_COUNT_SELECT, reg);
+
+	mdelay(10);
+
+	while (NXRD32(adapter, NETXEN_NIU_FRAME_COUNT) && ++cnt < 20)
+		mdelay(10);
+
+	if (cnt < 20) {
+
+		reg = NXRD32(adapter,
+			NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port));
+
+		if (mode == NETXEN_NIU_PROMISC_MODE)
+			reg = (reg | 0x2000UL);
+		else
+			reg = (reg & ~0x2000UL);
+
+		if (mode == NETXEN_NIU_ALLMULTI_MODE)
+			reg = (reg | 0x1000UL);
+		else
+			reg = (reg & ~0x1000UL);
+
+		NXWR32(adapter,
+			NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg);
+	}
+
+	mac_cfg |= 0x4;
+	NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg);
 
 	return 0;
 }
@@ -436,7 +469,7 @@
 {
 	u32	val = 0;
 	u16 port = adapter->physical_port;
-	u8 *addr = adapter->netdev->dev_addr;
+	u8 *addr = adapter->mac_addr;
 
 	if (adapter->mc_enabled)
 		return 0;
@@ -465,7 +498,7 @@
 {
 	u32	val = 0;
 	u16 port = adapter->physical_port;
-	u8 *addr = adapter->netdev->dev_addr;
+	u8 *addr = adapter->mac_addr;
 
 	if (!adapter->mc_enabled)
 		return 0;
@@ -660,7 +693,7 @@
 
 	list_splice_tail_init(&adapter->mac_list, &del_list);
 
-	nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list);
+	nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list);
 	nx_p3_nic_add_mac(adapter, bcast_addr, &del_list);
 
 	if (netdev->flags & IFF_PROMISC) {
@@ -1046,89 +1079,71 @@
  * Changes the CRB window to the specified window.
  */
 static void
-netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter, u32 wndw)
+netxen_nic_pci_set_crbwindow_128M(struct netxen_adapter *adapter,
+		u32 window)
 {
 	void __iomem *offset;
-	u32 tmp;
-	int count = 0;
-	uint8_t func = adapter->ahw.pci_func;
+	int count = 10;
+	u8 func = adapter->ahw.pci_func;
 
-	if (adapter->curr_window == wndw)
+	if (adapter->ahw.crb_win == window)
 		return;
-	/*
-	 * Move the CRB window.
-	 * We need to write to the "direct access" region of PCI
-	 * to avoid a race condition where the window register has
-	 * not been successfully written across CRB before the target
-	 * register address is received by PCI. The direct region bypasses
-	 * the CRB bus.
-	 */
+
 	offset = PCI_OFFSET_SECOND_RANGE(adapter,
 			NETXEN_PCIX_PH_REG(PCIE_CRB_WINDOW_REG(func)));
 
-	if (wndw & 0x1)
-		wndw = NETXEN_WINDOW_ONE;
-
-	writel(wndw, offset);
-
-	/* MUST make sure window is set before we forge on... */
-	while ((tmp = readl(offset)) != wndw) {
-		printk(KERN_WARNING "%s: %s WARNING: CRB window value not "
-		       "registered properly: 0x%08x.\n",
-		       netxen_nic_driver_name, __func__, tmp);
-		mdelay(1);
-		if (count >= 10)
+	writel(window, offset);
+	do {
+		if (window == readl(offset))
 			break;
-		count++;
-	}
 
-	if (wndw == NETXEN_WINDOW_ONE)
-		adapter->curr_window = 1;
-	else
-		adapter->curr_window = 0;
+		if (printk_ratelimit())
+			dev_warn(&adapter->pdev->dev,
+					"failed to set CRB window to %d\n",
+					(window == NETXEN_WINDOW_ONE));
+		udelay(1);
+
+	} while (--count > 0);
+
+	if (count > 0)
+		adapter->ahw.crb_win = window;
 }
 
 /*
- * Return -1 if off is not valid,
+ * Returns < 0 if off is not valid,
  *	 1 if window access is needed. 'off' is set to offset from
  *	   CRB space in 128M pci map
  *	 0 if no window access is needed. 'off' is set to 2M addr
  * In: 'off' is offset from base in 128M pci map
  */
 static int
-netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter, ulong *off)
+netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
+		ulong off, void __iomem **addr)
 {
 	crb_128M_2M_sub_block_map_t *m;
 
 
-	if (*off >= NETXEN_CRB_MAX)
-		return -1;
+	if ((off >= NETXEN_CRB_MAX) || (off < NETXEN_PCI_CRBSPACE))
+		return -EINVAL;
 
-	if (*off >= NETXEN_PCI_CAMQM && (*off < NETXEN_PCI_CAMQM_2M_END)) {
-		*off = (*off - NETXEN_PCI_CAMQM) + NETXEN_PCI_CAMQM_2M_BASE +
-			(ulong)adapter->ahw.pci_base0;
-		return 0;
-	}
-
-	if (*off < NETXEN_PCI_CRBSPACE)
-		return -1;
-
-	*off -= NETXEN_PCI_CRBSPACE;
+	off -= NETXEN_PCI_CRBSPACE;
 
 	/*
 	 * Try direct map
 	 */
-	m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)];
+	m = &crb_128M_2M_map[CRB_BLK(off)].sub_block[CRB_SUBBLK(off)];
 
-	if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) {
-		*off = *off + m->start_2M - m->start_128M +
-			(ulong)adapter->ahw.pci_base0;
+	if (m->valid && (m->start_128M <= off) && (m->end_128M > off)) {
+		*addr = adapter->ahw.pci_base0 + m->start_2M +
+			(off - m->start_128M);
 		return 0;
 	}
 
 	/*
 	 * Not in direct map, use crb window
 	 */
+	*addr = adapter->ahw.pci_base0 + CRB_INDIRECT_2M +
+		(off & MASK(16));
 	return 1;
 }
 
@@ -1138,52 +1153,78 @@
  * side effect: lock crb window
  */
 static void
-netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong *off)
+netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong off)
 {
-	u32 win_read;
+	u32 window;
+	void __iomem *addr = adapter->ahw.pci_base0 + CRB_WINDOW_2M;
 
-	adapter->crb_win = CRB_HI(*off);
-	writel(adapter->crb_win, (adapter->ahw.pci_base0 + CRB_WINDOW_2M));
-	/*
-	 * Read back value to make sure write has gone through before trying
-	 * to use it.
-	 */
-	win_read = readl(adapter->ahw.pci_base0 + CRB_WINDOW_2M);
-	if (win_read != adapter->crb_win) {
-		printk(KERN_ERR "%s: Written crbwin (0x%x) != "
-				"Read crbwin (0x%x), off=0x%lx\n",
-				__func__, adapter->crb_win, win_read, *off);
+	off -= NETXEN_PCI_CRBSPACE;
+
+	window = CRB_HI(off);
+
+	if (adapter->ahw.crb_win == window)
+		return;
+
+	writel(window, addr);
+	if (readl(addr) != window) {
+		if (printk_ratelimit())
+			dev_warn(&adapter->pdev->dev,
+				"failed to set CRB window to %d off 0x%lx\n",
+				window, off);
 	}
-	*off = (*off & MASK(16)) + CRB_INDIRECT_2M +
-		(ulong)adapter->ahw.pci_base0;
+	adapter->ahw.crb_win = window;
+}
+
+static void __iomem *
+netxen_nic_map_indirect_address_128M(struct netxen_adapter *adapter,
+		ulong win_off, void __iomem **mem_ptr)
+{
+	ulong off = win_off;
+	void __iomem *addr;
+	resource_size_t mem_base;
+
+	if (ADDR_IN_WINDOW1(win_off))
+		off = NETXEN_CRB_NORMAL(win_off);
+
+	addr = pci_base_offset(adapter, off);
+	if (addr)
+		return addr;
+
+	if (adapter->ahw.pci_len0 == 0)
+		off -= NETXEN_PCI_CRBSPACE;
+
+	mem_base = pci_resource_start(adapter->pdev, 0);
+	*mem_ptr = ioremap(mem_base + (off & PAGE_MASK), PAGE_SIZE);
+	if (*mem_ptr)
+		addr = *mem_ptr + (off & (PAGE_SIZE - 1));
+
+	return addr;
 }
 
 static int
 netxen_nic_hw_write_wx_128M(struct netxen_adapter *adapter, ulong off, u32 data)
 {
 	unsigned long flags;
-	void __iomem *addr;
+	void __iomem *addr, *mem_ptr = NULL;
 
-	if (ADDR_IN_WINDOW1(off))
-		addr = NETXEN_CRB_NORMALIZE(adapter, off);
-	else
-		addr = pci_base_offset(adapter, off);
+	addr = netxen_nic_map_indirect_address_128M(adapter, off, &mem_ptr);
+	if (!addr)
+		return -EIO;
 
-	BUG_ON(!addr);
-
-	if (ADDR_IN_WINDOW1(off)) {	/* Window 1 */
-		read_lock(&adapter->adapter_lock);
+	if (ADDR_IN_WINDOW1(off)) { /* Window 1 */
+		netxen_nic_io_write_128M(adapter, addr, data);
+	} else {        /* Window 0 */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 		writel(data, addr);
-		read_unlock(&adapter->adapter_lock);
-	} else {		/* Window 0 */
-		write_lock_irqsave(&adapter->adapter_lock, flags);
-		addr = pci_base_offset(adapter, off);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-		writel(data, addr);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter,
+				NETXEN_WINDOW_ONE);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
 	}
 
+	if (mem_ptr)
+		iounmap(mem_ptr);
+
 	return 0;
 }
 
@@ -1191,28 +1232,27 @@
 netxen_nic_hw_read_wx_128M(struct netxen_adapter *adapter, ulong off)
 {
 	unsigned long flags;
-	void __iomem *addr;
+	void __iomem *addr, *mem_ptr = NULL;
 	u32 data;
 
-	if (ADDR_IN_WINDOW1(off))
-		addr = NETXEN_CRB_NORMALIZE(adapter, off);
-	else
-		addr = pci_base_offset(adapter, off);
+	addr = netxen_nic_map_indirect_address_128M(adapter, off, &mem_ptr);
+	if (!addr)
+		return -EIO;
 
-	BUG_ON(!addr);
-
-	if (ADDR_IN_WINDOW1(off)) {	/* Window 1 */
-		read_lock(&adapter->adapter_lock);
+	if (ADDR_IN_WINDOW1(off)) { /* Window 1 */
+		data = netxen_nic_io_read_128M(adapter, addr);
+	} else {        /* Window 0 */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 		data = readl(addr);
-		read_unlock(&adapter->adapter_lock);
-	} else {		/* Window 0 */
-		write_lock_irqsave(&adapter->adapter_lock, flags);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-		data = readl(addr);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter,
+				NETXEN_WINDOW_ONE);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
 	}
 
+	if (mem_ptr)
+		iounmap(mem_ptr);
+
 	return data;
 }
 
@@ -1221,28 +1261,30 @@
 {
 	unsigned long flags;
 	int rv;
+	void __iomem *addr = NULL;
 
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, off, &addr);
 
-	if (rv == -1) {
-		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
-				__func__, off);
-		dump_stack();
-		return -1;
+	if (rv == 0) {
+		writel(data, addr);
+		return 0;
 	}
 
-	if (rv == 1) {
-		write_lock_irqsave(&adapter->adapter_lock, flags);
+	if (rv > 0) {
+		/* indirect access */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		crb_win_lock(adapter);
-		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		writel(data, (void __iomem *)off);
+		netxen_nic_pci_set_crbwindow_2M(adapter, off);
+		writel(data, addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	} else
-		writel(data, (void __iomem *)off);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		return 0;
+	}
 
-
-	return 0;
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -EIO;
 }
 
 static u32
@@ -1251,102 +1293,37 @@
 	unsigned long flags;
 	int rv;
 	u32 data;
+	void __iomem *addr = NULL;
 
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, off, &addr);
 
-	if (rv == -1) {
-		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
-				__func__, off);
-		dump_stack();
-		return -1;
-	}
+	if (rv == 0)
+		return readl(addr);
 
-	if (rv == 1) {
-		write_lock_irqsave(&adapter->adapter_lock, flags);
+	if (rv > 0) {
+		/* indirect access */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		crb_win_lock(adapter);
-		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		data = readl((void __iomem *)off);
+		netxen_nic_pci_set_crbwindow_2M(adapter, off);
+		data = readl(addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	} else
-		data = readl((void __iomem *)off);
-
-	return data;
-}
-
-static int netxen_pci_set_window_warning_count;
-
-static unsigned long
-netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
-		unsigned long long addr)
-{
-	void __iomem *offset;
-	int window;
-	unsigned long long	qdr_max;
-	uint8_t func = adapter->ahw.pci_func;
-
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P2;
-	} else {
-		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P3;
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		return data;
 	}
 
-	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		/* DDR network side */
-		addr -= NETXEN_ADDR_DDR_NET;
-		window = (addr >> 25) & 0x3ff;
-		if (adapter->ahw.ddr_mn_window != window) {
-			adapter->ahw.ddr_mn_window = window;
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-				NETXEN_PCIX_PH_REG(PCIE_MN_WINDOW_REG(func)));
-			writel(window, offset);
-			/* MUST make sure window is set before we forge on... */
-			readl(offset);
-		}
-		addr -= (window * NETXEN_WINDOW_ONE);
-		addr += NETXEN_PCI_DDR_NET;
-	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
-		addr -= NETXEN_ADDR_OCM0;
-		addr += NETXEN_PCI_OCM0;
-	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
-		addr -= NETXEN_ADDR_OCM1;
-		addr += NETXEN_PCI_OCM1;
-	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_QDR_NET, qdr_max)) {
-		/* QDR network side */
-		addr -= NETXEN_ADDR_QDR_NET;
-		window = (addr >> 22) & 0x3f;
-		if (adapter->ahw.qdr_sn_window != window) {
-			adapter->ahw.qdr_sn_window = window;
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-				NETXEN_PCIX_PH_REG(PCIE_SN_WINDOW_REG(func)));
-			writel((window << 22), offset);
-			/* MUST make sure window is set before we forge on... */
-			readl(offset);
-		}
-		addr -= (window * 0x400000);
-		addr += NETXEN_PCI_QDR_NET;
-	} else {
-		/*
-		 * peg gdb frequently accesses memory that doesn't exist,
-		 * this limits the chit chat so debugging isn't slowed down.
-		 */
-		if ((netxen_pci_set_window_warning_count++ < 8)
-		    || (netxen_pci_set_window_warning_count % 64 == 0))
-			printk("%s: Warning:netxen_nic_pci_set_window()"
-			       " Unknown address range!\n",
-			       netxen_nic_driver_name);
-		addr = -1UL;
-	}
-	return addr;
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -1;
 }
 
 /* window 1 registers only */
 static void netxen_nic_io_write_128M(struct netxen_adapter *adapter,
 		void __iomem *addr, u32 data)
 {
-	read_lock(&adapter->adapter_lock);
+	read_lock(&adapter->ahw.crb_lock);
 	writel(data, addr);
-	read_unlock(&adapter->adapter_lock);
+	read_unlock(&adapter->ahw.crb_lock);
 }
 
 static u32 netxen_nic_io_read_128M(struct netxen_adapter *adapter,
@@ -1354,9 +1331,9 @@
 {
 	u32 val;
 
-	read_lock(&adapter->adapter_lock);
+	read_lock(&adapter->ahw.crb_lock);
 	val = readl(addr);
-	read_unlock(&adapter->adapter_lock);
+	read_unlock(&adapter->ahw.crb_lock);
 
 	return val;
 }
@@ -1376,488 +1353,437 @@
 void __iomem *
 netxen_get_ioaddr(struct netxen_adapter *adapter, u32 offset)
 {
-	ulong off = offset;
+	void __iomem *addr = NULL;
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		if (offset < NETXEN_CRB_PCIX_HOST2 &&
-				offset > NETXEN_CRB_PCIX_HOST)
-			return PCI_OFFSET_SECOND_RANGE(adapter, offset);
-		return NETXEN_CRB_NORMALIZE(adapter, offset);
-	}
-
-	BUG_ON(netxen_nic_pci_get_crb_addr_2M(adapter, &off));
-	return (void __iomem *)off;
-}
-
-static unsigned long
-netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
-		unsigned long long addr)
-{
-	int window;
-	u32 win_read;
-
-	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		/* DDR network side */
-		window = MN_WIN(addr);
-		adapter->ahw.ddr_mn_window = window;
-		NXWR32(adapter, adapter->ahw.mn_win_crb, window);
-		win_read = NXRD32(adapter, adapter->ahw.mn_win_crb);
-		if ((win_read << 17) != window) {
-			printk(KERN_INFO "Written MNwin (0x%x) != "
-				"Read MNwin (0x%x)\n", window, win_read);
-		}
-		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_DDR_NET;
-	} else if (ADDR_IN_RANGE(addr,
-				NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
-		if ((addr & 0x00ff800) == 0xff800) {
-			printk("%s: QM access not handled.\n", __func__);
-			addr = -1UL;
-		}
-
-		window = OCM_WIN(addr);
-		adapter->ahw.ddr_mn_window = window;
-		NXWR32(adapter, adapter->ahw.mn_win_crb, window);
-		win_read = NXRD32(adapter, adapter->ahw.mn_win_crb);
-		if ((win_read >> 7) != window) {
-			printk(KERN_INFO "%s: Written OCMwin (0x%x) != "
-					"Read OCMwin (0x%x)\n",
-					__func__, window, win_read);
-		}
-		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_OCM0_2M;
-
-	} else if (ADDR_IN_RANGE(addr,
-			NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX_P3)) {
-		/* QDR network side */
-		window = MS_WIN(addr);
-		adapter->ahw.qdr_sn_window = window;
-		NXWR32(adapter, adapter->ahw.ms_win_crb, window);
-		win_read = NXRD32(adapter, adapter->ahw.ms_win_crb);
-		if (win_read != window) {
-			printk(KERN_INFO "%s: Written MSwin (0x%x) != "
-					"Read MSwin (0x%x)\n",
-					__func__, window, win_read);
-		}
-		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_QDR_NET;
-
+		if ((offset < NETXEN_CRB_PCIX_HOST2) &&
+				(offset > NETXEN_CRB_PCIX_HOST))
+			addr = PCI_OFFSET_SECOND_RANGE(adapter, offset);
+		else
+			addr = NETXEN_CRB_NORMALIZE(adapter, offset);
 	} else {
-		/*
-		 * peg gdb frequently accesses memory that doesn't exist,
-		 * this limits the chit chat so debugging isn't slowed down.
-		 */
-		if ((netxen_pci_set_window_warning_count++ < 8)
-			|| (netxen_pci_set_window_warning_count%64 == 0)) {
-			printk("%s: Warning:%s Unknown address range!\n",
-					__func__, netxen_nic_driver_name);
-}
-		addr = -1UL;
+		WARN_ON(netxen_nic_pci_get_crb_addr_2M(adapter,
+					offset, &addr));
 	}
+
 	return addr;
 }
 
+static int
+netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
+		u64 addr, u32 *start)
+{
+	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
+		*start = (addr - NETXEN_ADDR_OCM0  + NETXEN_PCI_OCM0);
+		return 0;
+	} else if (ADDR_IN_RANGE(addr,
+				NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		*start = (addr - NETXEN_ADDR_OCM1 + NETXEN_PCI_OCM1);
+		return 0;
+	}
+
+	return -EIO;
+}
+
+static int
+netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
+		u64 addr, u32 *start)
+{
+	u32 window;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if ((addr & 0x00ff800) == 0xff800) {
+		if (printk_ratelimit())
+			dev_warn(&pdev->dev, "QM access not handled\n");
+		return -EIO;
+	}
+
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id))
+		window = OCM_WIN_P3P(addr);
+	else
+		window = OCM_WIN(addr);
+
+	writel(window, adapter->ahw.ocm_win_crb);
+	/* read back to flush */
+	readl(adapter->ahw.ocm_win_crb);
+
+	adapter->ahw.ocm_win = window;
+	*start = NETXEN_PCI_OCM0_2M + GET_MEM_OFFS_2M(addr);
+	return 0;
+}
+
+static int
+netxen_nic_pci_mem_access_direct(struct netxen_adapter *adapter, u64 off,
+		u64 *data, int op)
+{
+	void __iomem *addr, *mem_ptr = NULL;
+	resource_size_t mem_base;
+	int ret = -EIO;
+	u32 start;
+
+	spin_lock(&adapter->ahw.mem_lock);
+
+	ret = adapter->pci_set_window(adapter, off, &start);
+	if (ret != 0)
+		goto unlock;
+
+	addr = pci_base_offset(adapter, start);
+	if (addr)
+		goto noremap;
+
+	mem_base = pci_resource_start(adapter->pdev, 0) + (start & PAGE_MASK);
+
+	mem_ptr = ioremap(mem_base, PAGE_SIZE);
+	if (mem_ptr == NULL) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	addr = mem_ptr + (start & (PAGE_SIZE - 1));
+
+noremap:
+	if (op == 0)	/* read */
+		*data = readq(addr);
+	else		/* write */
+		writeq(*data, addr);
+
+unlock:
+	spin_unlock(&adapter->ahw.mem_lock);
+
+	if (mem_ptr)
+		iounmap(mem_ptr);
+	return ret;
+}
+
 #define MAX_CTL_CHECK   1000
 
 static int
 netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 data)
 {
-	unsigned long   flags;
-	int	     i, j, ret = 0, loop, sz[2], off0;
-	uint32_t      temp;
-	uint64_t      off8, tmpw, word[2] = {0, 0};
+	int j, ret;
+	u32 temp, off_lo, off_hi, addr_hi, data_hi, data_lo;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P2 has different SIU and MIU test agent base addr */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P2)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_QDR_NET+SIU_TEST_AGT_BASE);
+		addr_hi = SIU_TEST_AGT_ADDR_HI;
+		data_lo = SIU_TEST_AGT_WRDATA_LO;
+		data_hi = SIU_TEST_AGT_WRDATA_HI;
+		off_lo = off & SIU_TEST_AGT_ADDR_MASK;
+		off_hi = SIU_TEST_AGT_UPPER_ADDR(off);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
+		addr_hi = MIU_TEST_AGT_ADDR_HI;
+		data_lo = MIU_TEST_AGT_WRDATA_LO;
+		data_hi = MIU_TEST_AGT_WRDATA_HI;
+		off_lo = off & MIU_TEST_AGT_ADDR_MASK;
+		off_hi = 0;
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX) ||
+		ADDR_IN_RANGE(off, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		if (adapter->ahw.pci_len0 != 0) {
+			return netxen_nic_pci_mem_access_direct(adapter,
+					off, &data, 1);
+		}
+	}
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0 = off & 0x7;
-	sz[0] = (size < (8 - off0)) ? size : (8 - off0);
-	sz[1] = size - sz[0];
-	loop = ((off0 + size - 1) >> 3) + 1;
+	spin_lock(&adapter->ahw.mem_lock);
+	netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 
-	if ((size != 8) || (off0 != 0))  {
-		for (i = 0; i < loop; i++) {
-			if (adapter->pci_mem_read(adapter,
-				off8 + (i << 3), &word[i], 8))
-				return -1;
-		}
-	}
+	writel(off_lo, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(off_hi, (mem_crb + addr_hi));
+	writel(data & 0xffffffff, (mem_crb + data_lo));
+	writel((data >> 32) & 0xffffffff, (mem_crb + data_hi));
+	writel((TA_CTL_ENABLE | TA_CTL_WRITE), (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE | TA_CTL_WRITE),
+			(mem_crb + TEST_AGT_CTRL));
 
-	switch (size) {
-	case 1:
-		tmpw = *((uint8_t *)data);
-		break;
-	case 2:
-		tmpw = *((uint16_t *)data);
-		break;
-	case 4:
-		tmpw = *((uint32_t *)data);
-		break;
-	case 8:
-	default:
-		tmpw = *((uint64_t *)data);
-		break;
-	}
-	word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8));
-	word[0] |= tmpw << (off0 * 8);
-
-	if (loop == 2) {
-		word[1] &= ~(~0ULL << (sz[1] * 8));
-		word[1] |= tmpw >> (sz[0] * 8);
-	}
-
-	write_lock_irqsave(&adapter->adapter_lock, flags);
-	netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-
-	for (i = 0; i < loop; i++) {
-		writel((uint32_t)(off8 + (i << 3)),
-			(mem_crb+MIU_TEST_AGT_ADDR_LO));
-		writel(0,
-			(mem_crb+MIU_TEST_AGT_ADDR_HI));
-		writel(word[i] & 0xffffffff,
-			(mem_crb+MIU_TEST_AGT_WRDATA_LO));
-		writel((word[i] >> 32) & 0xffffffff,
-			(mem_crb+MIU_TEST_AGT_WRDATA_HI));
-		writel(MIU_TA_CTL_ENABLE|MIU_TA_CTL_WRITE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-		writel(MIU_TA_CTL_START|MIU_TA_CTL_ENABLE|MIU_TA_CTL_WRITE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-
-		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(
-			     (mem_crb+MIU_TEST_AGT_CTRL));
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
-				break;
-		}
-
-		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to write through agent\n");
-			ret = -1;
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl((mem_crb + TEST_AGT_CTRL));
+		if ((temp & TA_CTL_BUSY) == 0)
 			break;
-		}
 	}
 
-	netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to write through agent\n");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+	netxen_nic_pci_set_crbwindow_128M(adapter, NETXEN_WINDOW_ONE);
+	spin_unlock(&adapter->ahw.mem_lock);
 	return ret;
 }
 
 static int
 netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 *data)
 {
-	unsigned long   flags;
-	int	     i, j = 0, k, start, end, loop, sz[2], off0[2];
-	uint32_t      temp;
-	uint64_t      off8, val, word[2] = {0, 0};
+	int j, ret;
+	u32 temp, off_lo, off_hi, addr_hi, data_hi, data_lo;
+	u64 val;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P2 has different SIU and MIU test agent base addr */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P2)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_QDR_NET+SIU_TEST_AGT_BASE);
+		addr_hi = SIU_TEST_AGT_ADDR_HI;
+		data_lo = SIU_TEST_AGT_RDDATA_LO;
+		data_hi = SIU_TEST_AGT_RDDATA_HI;
+		off_lo = off & SIU_TEST_AGT_ADDR_MASK;
+		off_hi = SIU_TEST_AGT_UPPER_ADDR(off);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
+		addr_hi = MIU_TEST_AGT_ADDR_HI;
+		data_lo = MIU_TEST_AGT_RDDATA_LO;
+		data_hi = MIU_TEST_AGT_RDDATA_HI;
+		off_lo = off & MIU_TEST_AGT_ADDR_MASK;
+		off_hi = 0;
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX) ||
+		ADDR_IN_RANGE(off, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		if (adapter->ahw.pci_len0 != 0) {
+			return netxen_nic_pci_mem_access_direct(adapter,
+					off, data, 0);
+		}
+	}
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0[0] = off & 0x7;
-	off0[1] = 0;
-	sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
-	sz[1] = size - sz[0];
-	loop = ((off0[0] + size - 1) >> 3) + 1;
+	spin_lock(&adapter->ahw.mem_lock);
+	netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 
-	write_lock_irqsave(&adapter->adapter_lock, flags);
-	netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+	writel(off_lo, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(off_hi, (mem_crb + addr_hi));
+	writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START|TA_CTL_ENABLE), (mem_crb + TEST_AGT_CTRL));
 
-	for (i = 0; i < loop; i++) {
-		writel((uint32_t)(off8 + (i << 3)),
-			(mem_crb+MIU_TEST_AGT_ADDR_LO));
-		writel(0,
-			(mem_crb+MIU_TEST_AGT_ADDR_HI));
-		writel(MIU_TA_CTL_ENABLE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-		writel(MIU_TA_CTL_START|MIU_TA_CTL_ENABLE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-
-		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(
-			      (mem_crb+MIU_TEST_AGT_CTRL));
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
-				break;
-		}
-
-		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to read through agent\n");
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
 			break;
-		}
-
-		start = off0[i] >> 2;
-		end   = (off0[i] + sz[i] - 1) >> 2;
-		for (k = start; k <= end; k++) {
-			word[i] |= ((uint64_t) readl(
-				    (mem_crb +
-				    MIU_TEST_AGT_RDDATA(k))) << (32*k));
-		}
 	}
 
-	netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	write_unlock_irqrestore(&adapter->adapter_lock, flags);
-
-	if (j >= MAX_CTL_CHECK)
-		return -1;
-
-	if (sz[0] == 8) {
-		val = word[0];
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+		ret = -EIO;
 	} else {
-		val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) |
-			((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8));
+
+		temp = readl(mem_crb + data_hi);
+		val = ((u64)temp << 32);
+		val |= readl(mem_crb + data_lo);
+		*data = val;
+		ret = 0;
 	}
 
-	switch (size) {
-	case 1:
-		*(uint8_t  *)data = val;
-		break;
-	case 2:
-		*(uint16_t *)data = val;
-		break;
-	case 4:
-		*(uint32_t *)data = val;
-		break;
-	case 8:
-		*(uint64_t *)data = val;
-		break;
-	}
-	return 0;
+	netxen_nic_pci_set_crbwindow_128M(adapter, NETXEN_WINDOW_ONE);
+	spin_unlock(&adapter->ahw.mem_lock);
+
+	return ret;
 }
 
 static int
 netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 data)
 {
-	int i, j, ret = 0, loop, sz[2], off0;
-	uint32_t temp;
-	uint64_t off8, tmpw, word[2] = {0, 0};
+	int i, j, ret;
+	u32 temp, off8;
+	u64 stride;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P3 onward, test agent base for MIU and SIU is same */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P3)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_QDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX))
+		return netxen_nic_pci_mem_access_direct(adapter, off, &data, 1);
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0 = off & 0x7;
-	sz[0] = (size < (8 - off0)) ? size : (8 - off0);
-	sz[1] = size - sz[0];
-	loop = ((off0 + size - 1) >> 3) + 1;
+	stride = NX_IS_REVISION_P3P(adapter->ahw.revision_id) ? 16 : 8;
 
-	if ((size != 8) || (off0 != 0)) {
-		for (i = 0; i < loop; i++) {
-			if (adapter->pci_mem_read(adapter,
-					off8 + (i << 3), &word[i], 8))
-				return -1;
-		}
-	}
+	off8 = off & ~(stride-1);
 
-	switch (size) {
-	case 1:
-		tmpw = *((uint8_t *)data);
-		break;
-	case 2:
-		tmpw = *((uint16_t *)data);
-		break;
-	case 4:
-		tmpw = *((uint32_t *)data);
-		break;
-	case 8:
-	default:
-		tmpw = *((uint64_t *)data);
-	break;
-	}
+	spin_lock(&adapter->ahw.mem_lock);
 
-	word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8));
-	word[0] |= tmpw << (off0 * 8);
+	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
 
-	if (loop == 2) {
-		word[1] &= ~(~0ULL << (sz[1] * 8));
-		word[1] |= tmpw >> (sz[0] * 8);
-	}
-
-	/*
-	 * don't lock here - write_wx gets the lock if each time
-	 * write_lock_irqsave(&adapter->adapter_lock, flags);
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-	 */
-
-	for (i = 0; i < loop; i++) {
-		writel(off8 + (i << 3), mem_crb+MIU_TEST_AGT_ADDR_LO);
-		writel(0, mem_crb+MIU_TEST_AGT_ADDR_HI);
-		writel(word[i] & 0xffffffff, mem_crb+MIU_TEST_AGT_WRDATA_LO);
-		writel((word[i] >> 32) & 0xffffffff,
-				mem_crb+MIU_TEST_AGT_WRDATA_HI);
-		writel((MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE),
-				mem_crb+MIU_TEST_AGT_CTRL);
-		writel(MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE,
-				mem_crb+MIU_TEST_AGT_CTRL);
+	i = 0;
+	if (stride == 16) {
+		writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+		writel((TA_CTL_START | TA_CTL_ENABLE),
+				(mem_crb + TEST_AGT_CTRL));
 
 		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(mem_crb + MIU_TEST_AGT_CTRL);
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
+			temp = readl(mem_crb + TEST_AGT_CTRL);
+			if ((temp & TA_CTL_BUSY) == 0)
 				break;
 		}
 
 		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to write through agent\n");
-			ret = -1;
-			break;
+			ret = -EIO;
+			goto done;
 		}
+
+		i = (off & 0xf) ? 0 : 2;
+		writel(readl(mem_crb + MIU_TEST_AGT_RDDATA(i)),
+				mem_crb + MIU_TEST_AGT_WRDATA(i));
+		writel(readl(mem_crb + MIU_TEST_AGT_RDDATA(i+1)),
+				mem_crb + MIU_TEST_AGT_WRDATA(i+1));
+		i = (off & 0xf) ? 2 : 0;
 	}
 
-	/*
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	 */
+	writel(data & 0xffffffff,
+			mem_crb + MIU_TEST_AGT_WRDATA(i));
+	writel((data >> 32) & 0xffffffff,
+			mem_crb + MIU_TEST_AGT_WRDATA(i+1));
+
+	writel((TA_CTL_ENABLE | TA_CTL_WRITE), (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE | TA_CTL_WRITE),
+			(mem_crb + TEST_AGT_CTRL));
+
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
+			break;
+	}
+
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to write through agent\n");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+done:
+	spin_unlock(&adapter->ahw.mem_lock);
+
 	return ret;
 }
 
 static int
 netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 *data)
 {
-	int i, j = 0, k, start, end, loop, sz[2], off0[2];
-	uint32_t      temp;
-	uint64_t      off8, val, word[2] = {0, 0};
+	int j, ret;
+	u32 temp, off8;
+	u64 val, stride;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P3 onward, test agent base for MIU and SIU is same */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P3)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_QDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
+		return netxen_nic_pci_mem_access_direct(adapter,
+				off, data, 0);
+	}
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0[0] = off & 0x7;
-	off0[1] = 0;
-	sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
-	sz[1] = size - sz[0];
-	loop = ((off0[0] + size - 1) >> 3) + 1;
+	stride = NX_IS_REVISION_P3P(adapter->ahw.revision_id) ? 16 : 8;
 
-	/*
-	 * don't lock here - write_wx gets the lock if each time
-	 * write_lock_irqsave(&adapter->adapter_lock, flags);
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-	 */
+	off8 = off & ~(stride-1);
 
-	for (i = 0; i < loop; i++) {
-		writel(off8 + (i << 3), mem_crb + MIU_TEST_AGT_ADDR_LO);
-		writel(0, mem_crb + MIU_TEST_AGT_ADDR_HI);
-		writel(MIU_TA_CTL_ENABLE, mem_crb + MIU_TEST_AGT_CTRL);
-		writel(MIU_TA_CTL_START | MIU_TA_CTL_ENABLE,
-				mem_crb + MIU_TEST_AGT_CTRL);
+	spin_lock(&adapter->ahw.mem_lock);
 
-		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(mem_crb + MIU_TEST_AGT_CTRL);
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
-				break;
-		}
+	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
+	writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE), (mem_crb + TEST_AGT_CTRL));
 
-		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to read through agent\n");
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
 			break;
-		}
-
-		start = off0[i] >> 2;
-		end   = (off0[i] + sz[i] - 1) >> 2;
-		for (k = start; k <= end; k++) {
-			temp = readl(mem_crb + MIU_TEST_AGT_RDDATA(k));
-			word[i] |= ((uint64_t)temp << (32 * k));
-		}
 	}
 
-	/*
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	 */
-
-	if (j >= MAX_CTL_CHECK)
-		return -1;
-
-	if (sz[0] == 8) {
-		val = word[0];
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+		ret = -EIO;
 	} else {
-		val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) |
-		((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8));
+		off8 = MIU_TEST_AGT_RDDATA_LO;
+		if ((stride == 16) && (off & 0xf))
+			off8 = MIU_TEST_AGT_RDDATA_UPPER_LO;
+
+		temp = readl(mem_crb + off8 + 4);
+		val = (u64)temp << 32;
+		val |= readl(mem_crb + off8);
+		*data = val;
+		ret = 0;
 	}
 
-	switch (size) {
-	case 1:
-		*(uint8_t  *)data = val;
-		break;
-	case 2:
-		*(uint16_t *)data = val;
-		break;
-	case 4:
-		*(uint32_t *)data = val;
-		break;
-	case 8:
-		*(uint64_t *)data = val;
-		break;
-	}
-	return 0;
+	spin_unlock(&adapter->ahw.mem_lock);
+
+	return ret;
 }
 
 void
@@ -2010,10 +1936,10 @@
 			return;
 		}
 
-		if (adapter->phy_read
-		    && adapter->phy_read(adapter,
-			     NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-			     &status) == 0) {
+		if (adapter->phy_read &&
+		    adapter->phy_read(adapter,
+				      NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+				      &status) == 0) {
 			if (netxen_get_phy_link(status)) {
 				switch (netxen_get_phy_speed(status)) {
 				case 0:
@@ -2040,10 +1966,10 @@
 					adapter->link_duplex = -1;
 					break;
 				}
-				if (adapter->phy_read
-				    && adapter->phy_read(adapter,
-					     NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
-					     &autoneg) != 0)
+				if (adapter->phy_read &&
+				    adapter->phy_read(adapter,
+						      NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG,
+						      &autoneg) != 0)
 					adapter->link_autoneg = autoneg;
 			} else
 				goto link_down;
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index e40b914..80a6674 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -46,6 +46,7 @@
 static void
 netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 		struct nx_host_rds_ring *rds_ring);
+static int netxen_p3_has_mn(struct netxen_adapter *adapter);
 
 static void crb_addr_transform_setup(void)
 {
@@ -437,7 +438,7 @@
 #define NETXEN_BOARDNUM 		0x400c
 #define NETXEN_CHIPNUM			0x4010
 
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
+int netxen_pinit_from_rom(struct netxen_adapter *adapter)
 {
 	int addr, val;
 	int i, n, init_delay = 0;
@@ -450,21 +451,6 @@
 	NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
 	netxen_rom_unlock(adapter);
 
-	if (verbose) {
-		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
-			printk("P2 ROM board type: 0x%08x\n", val);
-		else
-			printk("Could not read board type\n");
-		if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0)
-			printk("P2 ROM board  num: 0x%08x\n", val);
-		else
-			printk("Could not read board number\n");
-		if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0)
-			printk("P2 ROM chip   num: 0x%08x\n", val);
-		else
-			printk("Could not read chip number\n");
-	}
-
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
 			(n != 0xcafecafe) ||
@@ -486,11 +472,7 @@
 		n &= ~0x80000000;
 	}
 
-	if (n < 1024) {
-		if (verbose)
-			printk(KERN_DEBUG "%s: %d CRB init values found"
-			       " in ROM.\n", netxen_nic_driver_name, n);
-	} else {
+	if (n >= 1024) {
 		printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not"
 		       " initialized.\n", __func__, n);
 		return -EIO;
@@ -502,6 +484,7 @@
 				netxen_nic_driver_name);
 		return -ENOMEM;
 	}
+
 	for (i = 0; i < n; i++) {
 		if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
 		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
@@ -512,11 +495,8 @@
 		buf[i].addr = addr;
 		buf[i].data = val;
 
-		if (verbose)
-			printk(KERN_DEBUG "%s: PCI:     0x%08x == 0x%08x\n",
-				netxen_nic_driver_name,
-				(u32)netxen_decode_crb_addr(addr), val);
 	}
+
 	for (i = 0; i < n; i++) {
 
 		off = netxen_decode_crb_addr(buf[i].addr);
@@ -526,6 +506,10 @@
 			continue;
 		}
 		off += NETXEN_PCI_CRBSPACE;
+
+		if (off & 1)
+			continue;
+
 		/* skipping cold reboot MAGIC */
 		if (off == NETXEN_CAM_RAM(0x1fc))
 			continue;
@@ -544,7 +528,10 @@
 				continue;
 			if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
 				continue;
-			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
+			if ((off & 0x0ff00000) == NETXEN_CRB_DDR_NET)
+				continue;
+			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18) &&
+				!NX_IS_REVISION_P3P(adapter->ahw.revision_id))
 				buf[i].data = 0x1020;
 			/* skip the function enable register */
 			if (off == NETXEN_PCIE_REG(PCIE_SETUP_FUNCTION))
@@ -605,6 +592,172 @@
 	return 0;
 }
 
+static struct uni_table_desc *nx_get_table_desc(const u8 *unirom, int section)
+{
+	uint32_t i;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 entries = cpu_to_le32(directory->num_entries);
+
+	for (i = 0; i < entries; i++) {
+
+		__le32 offs = cpu_to_le32(directory->findex) +
+				(i * cpu_to_le32(directory->entry_size));
+		__le32 tab_type = cpu_to_le32(*((u32 *)&unirom[offs] + 8));
+
+		if (tab_type == section)
+			return (struct uni_table_desc *) &unirom[offs];
+	}
+
+	return NULL;
+}
+
+static int
+nx_set_product_offs(struct netxen_adapter *adapter)
+{
+	struct uni_table_desc *ptab_descr;
+	const u8 *unirom = adapter->fw->data;
+	uint32_t i;
+	__le32 entries;
+
+	ptab_descr = nx_get_table_desc(unirom, NX_UNI_DIR_SECT_PRODUCT_TBL);
+	if (ptab_descr == NULL)
+		return -1;
+
+	entries = cpu_to_le32(ptab_descr->num_entries);
+
+	for (i = 0; i < entries; i++) {
+
+		__le32 flags, file_chiprev, offs;
+		u8 chiprev = adapter->ahw.revision_id;
+		int mn_present = netxen_p3_has_mn(adapter);
+		uint32_t flagbit;
+
+		offs = cpu_to_le32(ptab_descr->findex) +
+				(i * cpu_to_le32(ptab_descr->entry_size));
+		flags = cpu_to_le32(*((int *)&unirom[offs] + NX_UNI_FLAGS_OFF));
+		file_chiprev = cpu_to_le32(*((int *)&unirom[offs] +
+							NX_UNI_CHIP_REV_OFF));
+
+		flagbit = mn_present ? 1 : 2;
+
+		if ((chiprev == file_chiprev) &&
+					((1ULL << flagbit) & flags)) {
+			adapter->file_prd_off = offs;
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+
+static struct uni_data_desc *nx_get_data_desc(struct netxen_adapter *adapter,
+			u32 section, u32 idx_offset)
+{
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+								idx_offset));
+	struct uni_table_desc *tab_desc;
+	__le32 offs;
+
+	tab_desc = nx_get_table_desc(unirom, section);
+
+	if (tab_desc == NULL)
+		return NULL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size) * idx);
+
+	return (struct uni_data_desc *)&unirom[offs];
+}
+
+static u8 *
+nx_get_bootld_offs(struct netxen_adapter *adapter)
+{
+	u32 offs = NETXEN_BOOTLD_START;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE)
+		offs = cpu_to_le32((nx_get_data_desc(adapter,
+					NX_UNI_DIR_SECT_BOOTLD,
+					NX_UNI_BOOTLD_IDX_OFF))->findex);
+
+	return (u8 *)&adapter->fw->data[offs];
+}
+
+static u8 *
+nx_get_fw_offs(struct netxen_adapter *adapter)
+{
+	u32 offs = NETXEN_IMAGE_START;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE)
+		offs = cpu_to_le32((nx_get_data_desc(adapter,
+					NX_UNI_DIR_SECT_FW,
+					NX_UNI_FIRMWARE_IDX_OFF))->findex);
+
+	return (u8 *)&adapter->fw->data[offs];
+}
+
+static __le32
+nx_get_fw_size(struct netxen_adapter *adapter)
+{
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE)
+		return cpu_to_le32((nx_get_data_desc(adapter,
+					NX_UNI_DIR_SECT_FW,
+					NX_UNI_FIRMWARE_IDX_OFF))->size);
+	else
+		return cpu_to_le32(
+				*(u32 *)&adapter->fw->data[NX_FW_SIZE_OFFSET]);
+}
+
+static __le32
+nx_get_fw_version(struct netxen_adapter *adapter)
+{
+	struct uni_data_desc *fw_data_desc;
+	const struct firmware *fw = adapter->fw;
+	__le32 major, minor, sub;
+	const u8 *ver_str;
+	int i, ret = 0;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE) {
+
+		fw_data_desc = nx_get_data_desc(adapter,
+				NX_UNI_DIR_SECT_FW, NX_UNI_FIRMWARE_IDX_OFF);
+		ver_str = fw->data + cpu_to_le32(fw_data_desc->findex) +
+				cpu_to_le32(fw_data_desc->size) - 17;
+
+		for (i = 0; i < 12; i++) {
+			if (!strncmp(&ver_str[i], "REV=", 4)) {
+				ret = sscanf(&ver_str[i+4], "%u.%u.%u ",
+							&major, &minor, &sub);
+				break;
+			}
+		}
+
+		if (ret != 3)
+			return 0;
+
+		return major + (minor << 8) + (sub << 16);
+
+	} else
+		return cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+}
+
+static __le32
+nx_get_bios_version(struct netxen_adapter *adapter)
+{
+	const struct firmware *fw = adapter->fw;
+	__le32 bios_ver, prd_off = adapter->file_prd_off;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE) {
+		bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
+						+ NX_UNI_BIOS_VERSION_OFF));
+		return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) +
+							(bios_ver >> 24);
+	} else
+		return cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
+
+}
+
 int
 netxen_need_fw_reset(struct netxen_adapter *adapter)
 {
@@ -644,9 +797,8 @@
 	/* check if we have got newer or different file firmware */
 	if (adapter->fw) {
 
-		const struct firmware *fw = adapter->fw;
+		val = nx_get_fw_version(adapter);
 
-		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
 		version = NETXEN_DECODE_VERSION(val);
 
 		major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
@@ -656,7 +808,8 @@
 		if (version > NETXEN_VERSION_CODE(major, minor, build))
 			return 1;
 
-		if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+		if (version == NETXEN_VERSION_CODE(major, minor, build) &&
+			adapter->fw_type != NX_UNIFIED_ROMIMAGE) {
 
 			val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
 			fw_type = (val & 0x4) ?
@@ -671,7 +824,11 @@
 }
 
 static char *fw_name[] = {
-	"nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+	NX_P2_MN_ROMIMAGE_NAME,
+	NX_P3_CT_ROMIMAGE_NAME,
+	NX_P3_MN_ROMIMAGE_NAME,
+	NX_UNIFIED_ROMIMAGE_NAME,
+	NX_FLASH_ROMIMAGE_NAME,
 };
 
 int
@@ -693,26 +850,28 @@
 
 		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
 
-		ptr64 = (u64 *)&fw->data[NETXEN_BOOTLD_START];
+		ptr64 = (u64 *)nx_get_bootld_offs(adapter);
 		flashaddr = NETXEN_BOOTLD_START;
 
 		for (i = 0; i < size; i++) {
 			data = cpu_to_le64(ptr64[i]);
-			adapter->pci_mem_write(adapter, flashaddr, &data, 8);
+
+			if (adapter->pci_mem_write(adapter, flashaddr, data))
+				return -EIO;
+
 			flashaddr += 8;
 		}
 
-		size = *(u32 *)&fw->data[NX_FW_SIZE_OFFSET];
-		size = (__force u32)cpu_to_le32(size) / 8;
+		size = (__force u32)nx_get_fw_size(adapter) / 8;
 
-		ptr64 = (u64 *)&fw->data[NETXEN_IMAGE_START];
+		ptr64 = (u64 *)nx_get_fw_offs(adapter);
 		flashaddr = NETXEN_IMAGE_START;
 
 		for (i = 0; i < size; i++) {
 			data = cpu_to_le64(ptr64[i]);
 
 			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 8))
+						flashaddr, data))
 				return -EIO;
 
 			flashaddr += 8;
@@ -726,17 +885,17 @@
 
 		for (i = 0; i < size; i++) {
 			if (netxen_rom_fast_read(adapter,
-					flashaddr, &lo) != 0)
+					flashaddr, (int *)&lo) != 0)
 				return -EIO;
 			if (netxen_rom_fast_read(adapter,
-					flashaddr + 4, &hi) != 0)
+					flashaddr + 4, (int *)&hi) != 0)
 				return -EIO;
 
 			/* hi, lo are already in host endian byteorder */
 			data = (((u64)hi << 32) | lo);
 
 			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 8))
+						flashaddr, data))
 				return -EIO;
 
 			flashaddr += 8;
@@ -744,7 +903,10 @@
 	}
 	msleep(1);
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+		NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0x18, 0x1020);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001e);
+	} else if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
 	else {
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
@@ -755,21 +917,31 @@
 }
 
 static int
-netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
+netxen_validate_firmware(struct netxen_adapter *adapter)
 {
 	__le32 val;
-	u32 ver, min_ver, bios;
+	u32 ver, min_ver, bios, min_size;
 	struct pci_dev *pdev = adapter->pdev;
 	const struct firmware *fw = adapter->fw;
+	u8 fw_type = adapter->fw_type;
 
-	if (fw->size < NX_FW_MIN_SIZE)
+	if (fw_type == NX_UNIFIED_ROMIMAGE) {
+		if (nx_set_product_offs(adapter))
+			return -EINVAL;
+
+		min_size = NX_UNI_FW_MIN_SIZE;
+	} else {
+		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
+		if ((__force u32)val != NETXEN_BDINFO_MAGIC)
+			return -EINVAL;
+
+		min_size = NX_FW_MIN_SIZE;
+	}
+
+	if (fw->size < min_size)
 		return -EINVAL;
 
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
-	if ((__force u32)val != NETXEN_BDINFO_MAGIC)
-		return -EINVAL;
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+	val = nx_get_fw_version(adapter);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
@@ -781,15 +953,15 @@
 	if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
 		dev_err(&pdev->dev,
 				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, _major(ver), _minor(ver), _build(ver));
+		fw_name[fw_type], _major(ver), _minor(ver), _build(ver));
 		return -EINVAL;
 	}
 
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
+	val = nx_get_bios_version(adapter);
 	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
 	if ((__force u32)val != bios) {
 		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
-				fwname);
+				fw_name[fw_type]);
 		return -EINVAL;
 	}
 
@@ -800,7 +972,7 @@
 	val = NETXEN_DECODE_VERSION(val);
 	if (val > ver) {
 		dev_info(&pdev->dev, "%s: firmware is older than flash\n",
-				fwname);
+				fw_name[fw_type]);
 		return -EINVAL;
 	}
 
@@ -808,6 +980,41 @@
 	return 0;
 }
 
+static void
+nx_get_next_fwtype(struct netxen_adapter *adapter)
+{
+	u8 fw_type;
+
+	switch (adapter->fw_type) {
+	case NX_UNKNOWN_ROMIMAGE:
+		fw_type = NX_UNIFIED_ROMIMAGE;
+		break;
+
+	case NX_UNIFIED_ROMIMAGE:
+		if (NX_IS_REVISION_P3P(adapter->ahw.revision_id))
+			fw_type = NX_FLASH_ROMIMAGE;
+		else if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+			fw_type = NX_P2_MN_ROMIMAGE;
+		else if (netxen_p3_has_mn(adapter))
+			fw_type = NX_P3_MN_ROMIMAGE;
+		else
+			fw_type = NX_P3_CT_ROMIMAGE;
+		break;
+
+	case NX_P3_MN_ROMIMAGE:
+		fw_type = NX_P3_CT_ROMIMAGE;
+		break;
+
+	case NX_P2_MN_ROMIMAGE:
+	case NX_P3_CT_ROMIMAGE:
+	default:
+		fw_type = NX_FLASH_ROMIMAGE;
+		break;
+	}
+
+	adapter->fw_type = fw_type;
+}
+
 static int
 netxen_p3_has_mn(struct netxen_adapter *adapter)
 {
@@ -829,49 +1036,29 @@
 
 void netxen_request_firmware(struct netxen_adapter *adapter)
 {
-	u8 fw_type;
 	struct pci_dev *pdev = adapter->pdev;
 	int rc = 0;
 
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		fw_type = NX_P2_MN_ROMIMAGE;
-		goto request_fw;
-	}
+	adapter->fw_type = NX_UNKNOWN_ROMIMAGE;
 
-	fw_type = netxen_p3_has_mn(adapter) ?
-		NX_P3_MN_ROMIMAGE : NX_P3_CT_ROMIMAGE;
+next:
+	nx_get_next_fwtype(adapter);
 
-request_fw:
-	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
-	if (rc != 0) {
-		if (fw_type == NX_P3_MN_ROMIMAGE) {
-			msleep(1);
-			fw_type = NX_P3_CT_ROMIMAGE;
-			goto request_fw;
-		}
-
-		fw_type = NX_FLASH_ROMIMAGE;
+	if (adapter->fw_type == NX_FLASH_ROMIMAGE) {
 		adapter->fw = NULL;
-		goto done;
-	}
+	} else {
+		rc = request_firmware(&adapter->fw,
+				fw_name[adapter->fw_type], &pdev->dev);
+		if (rc != 0)
+			goto next;
 
-	rc = netxen_validate_firmware(adapter, fw_name[fw_type]);
-	if (rc != 0) {
-		release_firmware(adapter->fw);
-
-		if (fw_type == NX_P3_MN_ROMIMAGE) {
+		rc = netxen_validate_firmware(adapter);
+		if (rc != 0) {
+			release_firmware(adapter->fw);
 			msleep(1);
-			fw_type = NX_P3_CT_ROMIMAGE;
-			goto request_fw;
+			goto next;
 		}
-
-		fw_type = NX_FLASH_ROMIMAGE;
-		adapter->fw = NULL;
-		goto done;
 	}
-
-done:
-	adapter->fw_type = fw_type;
 }
 
 
@@ -1506,10 +1693,8 @@
 					      (rds_ring->num_desc - 1)));
 			netxen_set_msg_ctxid(msg, adapter->portnum);
 			netxen_set_msg_opcode(msg, NETXEN_RCV_PRODUCER(ringid));
-			read_lock(&adapter->adapter_lock);
-			writel(msg, DB_NORMALIZE(adapter,
-					    NETXEN_RCV_PRODUCER_OFFSET));
-			read_unlock(&adapter->adapter_lock);
+			NXWRIO(adapter, DB_NORMALIZE(adapter,
+					NETXEN_RCV_PRODUCER_OFFSET), msg);
 		}
 	}
 }
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 0b4a56a..e5d187f 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -34,13 +34,18 @@
 #include <net/ip.h>
 #include <linux/ipv6.h>
 #include <linux/inetdevice.h>
+#include <linux/sysfs.h>
 
-MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
+MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Converged Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
+MODULE_FIRMWARE(NX_P2_MN_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_P3_CT_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_P3_MN_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_UNIFIED_ROMIMAGE_NAME);
 
 char netxen_nic_driver_name[] = "netxen_nic";
-static char netxen_nic_driver_string[] = "NetXen Network Driver version "
+static char netxen_nic_driver_string[] = "QLogic/NetXen Network Driver v"
     NETXEN_NIC_LINUX_VERSIONID;
 
 static int port_mode = NETXEN_PORT_MODE_AUTO_NEG;
@@ -52,7 +57,8 @@
 
 static int use_msi_x = 1;
 
-/* Local functions to NetXen NIC driver */
+static unsigned long auto_fw_reset = AUTO_FW_RESET_ENABLED;
+
 static int __devinit netxen_nic_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent);
 static void __devexit netxen_nic_remove(struct pci_dev *pdev);
@@ -73,6 +79,8 @@
 
 static void netxen_create_sysfs_entries(struct netxen_adapter *adapter);
 static void netxen_remove_sysfs_entries(struct netxen_adapter *adapter);
+static void netxen_create_diag_entries(struct netxen_adapter *adapter);
+static void netxen_remove_diag_entries(struct netxen_adapter *adapter);
 
 static int nx_decr_dev_ref_cnt(struct netxen_adapter *adapter);
 static int netxen_can_start_firmware(struct netxen_adapter *adapter);
@@ -437,6 +445,7 @@
 		netdev->dev_addr[i] = *(p + 5 - i);
 
 	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+	memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len);
 
 	/* set station address */
 
@@ -459,6 +468,7 @@
 		netxen_napi_disable(adapter);
 	}
 
+	memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len);
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	adapter->macaddr_set(adapter, addr->sa_data);
 
@@ -607,14 +617,12 @@
 	 * Set the CRB window to invalid. If any register in window 0 is
 	 * accessed it should set the window to 0 and then reset it to 1.
 	 */
-	adapter->curr_window = 255;
-	adapter->ahw.qdr_sn_window = -1;
-	adapter->ahw.ddr_mn_window = -1;
+	adapter->ahw.crb_win = -1;
+	adapter->ahw.ocm_win = -1;
 
 	/* remap phys address */
 	mem_base = pci_resource_start(pdev, 0);	/* 0 is for BAR 0 */
 	mem_len = pci_resource_len(pdev, 0);
-	pci_len0 = 0;
 
 	/* 128 Meg of memory */
 	if (mem_len == NETXEN_PCI_128MB_SIZE) {
@@ -623,6 +631,7 @@
 				SECOND_PAGE_GROUP_SIZE);
 		mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START,
 				THIRD_PAGE_GROUP_SIZE);
+		pci_len0 = FIRST_PAGE_GROUP_SIZE;
 	} else if (mem_len == NETXEN_PCI_32MB_SIZE) {
 		mem_ptr1 = ioremap(mem_base, SECOND_PAGE_GROUP_SIZE);
 		mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START -
@@ -635,19 +644,6 @@
 			return -EIO;
 		}
 		pci_len0 = mem_len;
-
-		adapter->ahw.ddr_mn_window = 0;
-		adapter->ahw.qdr_sn_window = 0;
-
-		adapter->ahw.mn_win_crb = NETXEN_PCI_CRBSPACE +
-			0x100000 + PCIX_MN_WINDOW + (pci_func * 0x20);
-		adapter->ahw.ms_win_crb = NETXEN_PCI_CRBSPACE +
-			0x100000 + PCIX_SN_WINDOW;
-		if (pci_func < 4)
-			adapter->ahw.ms_win_crb += (pci_func * 0x20);
-		else
-			adapter->ahw.ms_win_crb +=
-					0xA0 + ((pci_func - 4) * 0x10);
 	} else {
 		return -EIO;
 	}
@@ -661,6 +657,15 @@
 	adapter->ahw.pci_base1 = mem_ptr1;
 	adapter->ahw.pci_base2 = mem_ptr2;
 
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+		adapter->ahw.ocm_win_crb = netxen_get_ioaddr(adapter,
+			NETXEN_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(pci_func)));
+
+	} else if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		adapter->ahw.ocm_win_crb = netxen_get_ioaddr(adapter,
+			NETXEN_PCIX_PS_REG(PCIE_MN_WINDOW_REG(pci_func)));
+	}
+
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		goto skip_doorbell;
 
@@ -725,7 +730,8 @@
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(adapter->ahw.board_type, brd_name);
 
-		printk(KERN_INFO "NetXen %s Board S/N %s  Chip rev 0x%x\n",
+		pr_info("%s: %s Board S/N %s  Chip rev 0x%x\n",
+				module_name(THIS_MODULE),
 				brd_name, serial_num, adapter->ahw.revision_id);
 	}
 
@@ -813,11 +819,11 @@
 	if (err < 0)
 		goto err_out;
 	if (err == 0)
-		goto ready;
+		goto wait_init;
 
 	if (first_boot != 0x55555555) {
 		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
-		netxen_pinit_from_rom(adapter, 0);
+		netxen_pinit_from_rom(adapter);
 		msleep(1);
 	}
 
@@ -856,9 +862,6 @@
 		| (_NETXEN_NIC_LINUX_SUBVERSION);
 	NXWR32(adapter, CRB_DRIVER_VERSION, val);
 
-ready:
-	NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_READY);
-
 wait_init:
 	/* Handshake with the card before we register the devices. */
 	err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
@@ -867,6 +870,8 @@
 		goto err_out;
 	}
 
+	NXWR32(adapter, NX_CRB_DEV_STATE, NX_DEV_READY);
+
 	nx_update_dma_mask(adapter);
 
 	netxen_check_options(adapter);
@@ -956,7 +961,7 @@
 		return err;
 	}
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
-		adapter->macaddr_set(adapter, netdev->dev_addr);
+		adapter->macaddr_set(adapter, adapter->mac_addr);
 
 	adapter->set_multi(netdev);
 	adapter->set_mtu(adapter, netdev->mtu);
@@ -1207,16 +1212,10 @@
 	int pci_func_id = PCI_FUNC(pdev->devfn);
 	uint8_t revision_id;
 
-	if (pdev->class != 0x020000) {
-		printk(KERN_DEBUG "NetXen function %d, class %x will not "
-				"be enabled.\n",pci_func_id, pdev->class);
-		return -ENODEV;
-	}
-
 	if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
-		printk(KERN_WARNING "NetXen chip revisions between 0x%x-0x%x"
+		pr_warning("%s: chip revisions between 0x%x-0x%x"
 				"will not be enabled.\n",
-				NX_P3_A0, NX_P3_B1);
+				module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
 		return -ENODEV;
 	}
 
@@ -1250,7 +1249,9 @@
 	revision_id = pdev->revision;
 	adapter->ahw.revision_id = revision_id;
 
-	rwlock_init(&adapter->adapter_lock);
+	rwlock_init(&adapter->ahw.crb_lock);
+	spin_lock_init(&adapter->ahw.mem_lock);
+
 	spin_lock_init(&adapter->tx_clean_lock);
 	INIT_LIST_HEAD(&adapter->mac_list);
 
@@ -1280,7 +1281,7 @@
 
 	err = netxen_start_firmware(adapter);
 	if (err)
-		goto err_out_iounmap;
+		goto err_out_decr_ref;
 
 	/*
 	 * See if the firmware gave us a virtual-physical port mapping.
@@ -1315,6 +1316,8 @@
 		break;
 	}
 
+	netxen_create_diag_entries(adapter);
+
 	return 0;
 
 err_out_disable_msi:
@@ -1322,6 +1325,7 @@
 
 	netxen_free_dummy_dma(adapter);
 
+err_out_decr_ref:
 	nx_decr_dev_ref_cnt(adapter);
 
 err_out_iounmap:
@@ -1367,6 +1371,8 @@
 
 	netxen_teardown_intr(adapter);
 
+	netxen_remove_diag_entries(adapter);
+
 	netxen_cleanup_pci_map(adapter);
 
 	netxen_release_firmware(adapter);
@@ -1447,7 +1453,8 @@
 	if (err)
 		return err;
 
-	adapter->curr_window = 255;
+	adapter->ahw.crb_win = -1;
+	adapter->ahw.ocm_win = -1;
 
 	err = netxen_start_firmware(adapter);
 	if (err) {
@@ -1925,7 +1932,7 @@
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct net_device_stats *stats = &adapter->net_stats;
+	struct net_device_stats *stats = &netdev->stats;
 
 	memset(stats, 0, sizeof(*stats));
 
@@ -2182,14 +2189,13 @@
 					netxen_fwinit_work, 2 * FW_POLL_DELAY);
 			return;
 		}
-		break;
 
 	case NX_DEV_FAILED:
 	default:
+		nx_incr_dev_ref_cnt(adapter);
 		break;
 	}
 
-	nx_incr_dev_ref_cnt(adapter);
 	clear_bit(__NX_RESETTING, &adapter->state);
 }
 
@@ -2211,18 +2217,23 @@
 
 	status = NXRD32(adapter, NETXEN_PEG_HALT_STATUS1);
 
-	ref_cnt = nx_decr_dev_ref_cnt(adapter);
-
 	if (status & NX_RCODE_FATAL_ERROR)
-		return;
+		goto err_ret;
 
 	if (adapter->temp == NX_TEMP_PANIC)
-		return;
+		goto err_ret;
+
+	ref_cnt = nx_decr_dev_ref_cnt(adapter);
 
 	delay = (ref_cnt == 0) ? 0 : (2 * FW_POLL_DELAY);
 
 	adapter->fw_wait_cnt = 0;
 	netxen_schedule_work(adapter, netxen_fwinit_work, delay);
+
+	return;
+
+err_ret:
+	clear_bit(__NX_RESETTING, &adapter->state);
 }
 
 static int
@@ -2261,7 +2272,8 @@
 	dev_info(&netdev->dev, "firmware hang detected\n");
 
 detach:
-	if (!test_and_set_bit(__NX_RESETTING, &adapter->state))
+	if ((auto_fw_reset == AUTO_FW_RESET_ENABLED) &&
+			!test_and_set_bit(__NX_RESETTING, &adapter->state))
 		netxen_schedule_work(adapter, netxen_detach_work, 0);
 	return 1;
 }
@@ -2339,6 +2351,197 @@
        .store = netxen_store_bridged_mode,
 };
 
+static ssize_t
+netxen_store_diag_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	unsigned long new;
+
+	if (strict_strtoul(buf, 2, &new))
+		return -EINVAL;
+
+	if (!!new != !!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
+		adapter->flags ^= NETXEN_NIC_DIAG_ENABLED;
+
+	return len;
+}
+
+static ssize_t
+netxen_show_diag_mode(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n",
+			!!(adapter->flags & NETXEN_NIC_DIAG_ENABLED));
+}
+
+static struct device_attribute dev_attr_diag_mode = {
+	.attr = {.name = "diag_mode", .mode = (S_IRUGO | S_IWUSR)},
+	.show = netxen_show_diag_mode,
+	.store = netxen_store_diag_mode,
+};
+
+static int
+netxen_sysfs_validate_crb(struct netxen_adapter *adapter,
+		loff_t offset, size_t size)
+{
+	if (!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
+		return -EIO;
+
+	if ((size != 4) || (offset & 0x3))
+		return  -EINVAL;
+
+	if (offset < NETXEN_PCI_CRBSPACE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static ssize_t
+netxen_sysfs_read_crb(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u32 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_crb(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	data = NXRD32(adapter, offset);
+	memcpy(buf, &data, size);
+	return size;
+}
+
+static ssize_t
+netxen_sysfs_write_crb(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u32 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_crb(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	memcpy(&data, buf, size);
+	NXWR32(adapter, offset, data);
+	return size;
+}
+
+static int
+netxen_sysfs_validate_mem(struct netxen_adapter *adapter,
+		loff_t offset, size_t size)
+{
+	if (!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
+		return -EIO;
+
+	if ((size != 8) || (offset & 0x7))
+		return  -EIO;
+
+	return 0;
+}
+
+static ssize_t
+netxen_sysfs_read_mem(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u64 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_mem(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	if (adapter->pci_mem_read(adapter, offset, &data))
+		return -EIO;
+
+	memcpy(buf, &data, size);
+
+	return size;
+}
+
+ssize_t netxen_sysfs_write_mem(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u64 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_mem(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	memcpy(&data, buf, size);
+
+	if (adapter->pci_mem_write(adapter, offset, data))
+		return -EIO;
+
+	return size;
+}
+
+
+static struct bin_attribute bin_attr_crb = {
+	.attr = {.name = "crb", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = netxen_sysfs_read_crb,
+	.write = netxen_sysfs_write_crb,
+};
+
+static struct bin_attribute bin_attr_mem = {
+	.attr = {.name = "mem", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = netxen_sysfs_read_mem,
+	.write = netxen_sysfs_write_mem,
+};
+
+#ifdef CONFIG_MODULES
+static ssize_t
+netxen_store_auto_fw_reset(struct module_attribute *mattr,
+		struct module *mod, const char *buf, size_t count)
+
+{
+	unsigned long new;
+
+	if (strict_strtoul(buf, 16, &new))
+		return -EINVAL;
+
+	if ((new == AUTO_FW_RESET_ENABLED) || (new == AUTO_FW_RESET_DISABLED)) {
+		auto_fw_reset = new;
+		return count;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t
+netxen_show_auto_fw_reset(struct module_attribute *mattr,
+		struct module *mod, char *buf)
+
+{
+	if (auto_fw_reset == AUTO_FW_RESET_ENABLED)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static struct module_attribute mod_attr_fw_reset = {
+	.attr = {.name = "auto_fw_reset", .mode = (S_IRUGO | S_IWUSR)},
+	.show = netxen_show_auto_fw_reset,
+	.store = netxen_store_auto_fw_reset,
+};
+#endif
+
 static void
 netxen_create_sysfs_entries(struct netxen_adapter *adapter)
 {
@@ -2364,6 +2567,33 @@
 		device_remove_file(dev, &dev_attr_bridged_mode);
 }
 
+static void
+netxen_create_diag_entries(struct netxen_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev;
+
+	dev = &pdev->dev;
+	if (device_create_file(dev, &dev_attr_diag_mode))
+		dev_info(dev, "failed to create diag_mode sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_crb))
+		dev_info(dev, "failed to create crb sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_mem))
+		dev_info(dev, "failed to create mem sysfs entry\n");
+}
+
+
+static void
+netxen_remove_diag_entries(struct netxen_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev = &pdev->dev;
+
+	device_remove_file(dev, &dev_attr_diag_mode);
+	device_remove_bin_file(dev, &bin_attr_crb);
+	device_remove_bin_file(dev, &bin_attr_mem);
+}
+
 #ifdef CONFIG_INET
 
 #define is_netxen_netdev(dev) (dev->netdev_ops == &netxen_netdev_ops)
@@ -2516,6 +2746,10 @@
 
 static int __init netxen_init_module(void)
 {
+#ifdef CONFIG_MODULES
+	struct module *mod = THIS_MODULE;
+#endif
+
 	printk(KERN_INFO "%s\n", netxen_nic_driver_string);
 
 #ifdef CONFIG_INET
@@ -2523,6 +2757,12 @@
 	register_inetaddr_notifier(&netxen_inetaddr_cb);
 #endif
 
+#ifdef CONFIG_MODULES
+	if (sysfs_create_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr))
+		printk(KERN_ERR "%s: Failed to create auto_fw_reset "
+				"sysfs entry.", netxen_nic_driver_name);
+#endif
+
 	return pci_register_driver(&netxen_driver);
 }
 
@@ -2530,6 +2770,12 @@
 
 static void __exit netxen_exit_module(void)
 {
+#ifdef CONFIG_MODULES
+	struct module *mod = THIS_MODULE;
+
+	sysfs_remove_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr);
+#endif
+
 	pci_unregister_driver(&netxen_driver);
 
 #ifdef CONFIG_INET
diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c
index 462d20f..6a87d81 100644
--- a/drivers/net/ni5010.c
+++ b/drivers/net/ni5010.c
@@ -377,7 +377,7 @@
 
 	PRINTK2((KERN_DEBUG "%s: entering ni5010_open()\n", dev->name));
 
-	if (request_irq(dev->irq, &ni5010_interrupt, 0, boardname, dev)) {
+	if (request_irq(dev->irq, ni5010_interrupt, 0, boardname, dev)) {
 		printk(KERN_WARNING "%s: Cannot get irq %#2x\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index aad3b37..b42f5e5 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -284,7 +284,7 @@
 	startrecv586(dev);
 	ni_enaint();
 
-	ret = request_irq(dev->irq, &ni52_interrupt, 0, dev->name, dev);
+	ret = request_irq(dev->irq, ni52_interrupt, 0, dev->name, dev);
 	if (ret) {
 		ni_reset586();
 		return ret;
@@ -477,8 +477,8 @@
 	for (i = 0; i < ETH_ALEN; i++)
 		dev->dev_addr[i] = inb(dev->base_addr+i);
 
-	if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1
-		 || dev->dev_addr[2] != NI52_ADDR2) {
+	if (dev->dev_addr[0] != NI52_ADDR0 || dev->dev_addr[1] != NI52_ADDR1 ||
+	    dev->dev_addr[2] != NI52_ADDR2) {
 		retval = -ENODEV;
 		goto out;
 	}
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index 752c2e4..ae19aaf 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -294,7 +294,7 @@
 static int ni65_open(struct net_device *dev)
 {
 	struct priv *p = dev->ml_priv;
-	int irqval = request_irq(dev->irq, &ni65_interrupt,0,
+	int irqval = request_irq(dev->irq, ni65_interrupt,0,
                         cards[p->cardno].cardname,dev);
 	if (irqval) {
 		printk(KERN_ERR "%s: unable to get IRQ %d (irqval=%d).\n",
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d6c7ac6..8ce58c4 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -45,10 +45,6 @@
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
 
-#ifndef DMA_44BIT_MASK
-#define DMA_44BIT_MASK	0x00000fffffffffffULL
-#endif
-
 #ifndef readq
 static u64 readq(void __iomem *reg)
 {
@@ -7855,10 +7851,13 @@
 	}
 }
 
-static int niu_get_stats_count(struct net_device *dev)
+static int niu_get_sset_count(struct net_device *dev, int stringset)
 {
 	struct niu *np = netdev_priv(dev);
 
+	if (stringset != ETH_SS_STATS)
+		return -EINVAL;
+
 	return ((np->flags & NIU_FLAGS_XMAC ?
 		 NUM_XMAC_STAT_KEYS :
 		 NUM_BMAC_STAT_KEYS) +
@@ -7978,7 +7977,7 @@
 	.get_settings		= niu_get_settings,
 	.set_settings		= niu_set_settings,
 	.get_strings		= niu_get_strings,
-	.get_stats_count	= niu_get_stats_count,
+	.get_sset_count		= niu_get_sset_count,
 	.get_ethtool_stats	= niu_get_ethtool_stats,
 	.phys_id		= niu_phys_id,
 	.get_rxnfc		= niu_get_nfc,
@@ -8144,7 +8143,7 @@
 	int i;
 
 	for (i = 0; i < len - 5; i++) {
-		if (!strncmp(s + i, "FCode ", 5))
+		if (!strncmp(s + i, "FCode ", 6))
 			break;
 	}
 	if (i >= len - 5)
@@ -9915,7 +9914,7 @@
 		  PCI_EXP_DEVCTL_RELAX_EN);
 	pci_write_config_word(pdev, pos + PCI_EXP_DEVCTL, val16);
 
-	dma_mask = DMA_44BIT_MASK;
+	dma_mask = DMA_BIT_MASK(44);
 	err = pci_set_dma_mask(pdev, dma_mask);
 	if (!err) {
 		dev->features |= NETIF_F_HIGHDMA;
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 57fd483..1f6327d 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -648,8 +648,8 @@
 		dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n",
 			tbisr, tanar, tanlpar);
 
-		if ( (fullduplex = (tanlpar & TANAR_FULL_DUP)
-		      && (tanar & TANAR_FULL_DUP)) ) {
+		if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) &&
+		      (tanar & TANAR_FULL_DUP)) ) {
 
 			/* both of us are full duplex */
 			writel(readl(dev->base + TXCFG)
@@ -661,12 +661,12 @@
 			writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT,
 			       dev->base + GPIOR);
 
-		} else if(((tanlpar & TANAR_HALF_DUP)
-			   && (tanar & TANAR_HALF_DUP))
-			|| ((tanlpar & TANAR_FULL_DUP)
-			    && (tanar & TANAR_HALF_DUP))
-			|| ((tanlpar & TANAR_HALF_DUP)
-			    && (tanar & TANAR_FULL_DUP))) {
+		} else if (((tanlpar & TANAR_HALF_DUP) &&
+			    (tanar & TANAR_HALF_DUP)) ||
+			   ((tanlpar & TANAR_FULL_DUP) &&
+			    (tanar & TANAR_HALF_DUP)) ||
+			   ((tanlpar & TANAR_HALF_DUP) &&
+			    (tanar & TANAR_FULL_DUP))) {
 
 			/* one or both of us are half duplex */
 			writel((readl(dev->base + TXCFG)
@@ -720,16 +720,16 @@
 
 	newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN;
 
-	if (newlinkstate & LINK_UP
-	    && dev->linkstate != newlinkstate) {
+	if (newlinkstate & LINK_UP &&
+	    dev->linkstate != newlinkstate) {
 		netif_start_queue(ndev);
 		netif_wake_queue(ndev);
 		printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n",
 			ndev->name,
 			speeds[speed],
 			fullduplex ? "full" : "half");
-	} else if (newlinkstate & LINK_DOWN
-		   && dev->linkstate != newlinkstate) {
+	} else if (newlinkstate & LINK_DOWN &&
+		   dev->linkstate != newlinkstate) {
 		netif_stop_queue(ndev);
 		printk(KERN_INFO "%s: link now down.\n", ndev->name);
 	}
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index c254a7f..1673eb0 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -1216,7 +1216,7 @@
 	snprintf(mac->tx_irq_name, sizeof(mac->tx_irq_name), "%s tx",
 		 dev->name);
 
-	ret = request_irq(mac->tx->chan.irq, &pasemi_mac_tx_intr, IRQF_DISABLED,
+	ret = request_irq(mac->tx->chan.irq, pasemi_mac_tx_intr, IRQF_DISABLED,
 			  mac->tx_irq_name, mac->tx);
 	if (ret) {
 		dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
@@ -1227,7 +1227,7 @@
 	snprintf(mac->rx_irq_name, sizeof(mac->rx_irq_name), "%s rx",
 		 dev->name);
 
-	ret = request_irq(mac->rx->chan.irq, &pasemi_mac_rx_intr, IRQF_DISABLED,
+	ret = request_irq(mac->rx->chan.irq, pasemi_mac_rx_intr, IRQF_DISABLED,
 			  mac->rx_irq_name, mac->rx);
 	if (ret) {
 		dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
index 28a8622..fefa79e 100644
--- a/drivers/net/pasemi_mac_ethtool.c
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -77,6 +77,19 @@
 	return phy_ethtool_gset(phydev, cmd);
 }
 
+static int
+pasemi_mac_ethtool_set_settings(struct net_device *netdev,
+			       struct ethtool_cmd *cmd)
+{
+	struct pasemi_mac *mac = netdev_priv(netdev);
+	struct phy_device *phydev = mac->phydev;
+
+	if (!phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_sset(phydev, cmd);
+}
+
 static void
 pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
 			       struct ethtool_drvinfo *drvinfo)
@@ -150,6 +163,7 @@
 
 const struct ethtool_ops pasemi_mac_ethtool_ops = {
 	.get_settings		= pasemi_mac_ethtool_get_settings,
+	.set_settings		= pasemi_mac_ethtool_set_settings,
 	.get_drvinfo		= pasemi_mac_ethtool_get_drvinfo,
 	.get_msglevel		= pasemi_mac_ethtool_get_msglevel,
 	.set_msglevel		= pasemi_mac_ethtool_set_msglevel,
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 0c44b48..480af40 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -1225,8 +1225,8 @@
 	mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
 
 	if (!tp->duplex_lock && mii_lpa != 0xffff) {
-		int duplex = (mii_lpa & LPA_100FULL)
-		    || (mii_lpa & 0x01C0) == 0x0040;
+		int duplex = ((mii_lpa & LPA_100FULL) ||
+			      (mii_lpa & 0x01C0) == 0x0040);
 		if (tp->full_duplex != duplex) {
 			tp->full_duplex = duplex;
 			printk (KERN_INFO
@@ -1612,8 +1612,8 @@
 	    (tp->drv_flags & HAS_LNK_CHNG)) {
 		/* Really link-change on new chips. */
 		int lpar = NETDRV_R16 (NWayLPAR);
-		int duplex = (lpar & 0x0100) || (lpar & 0x01C0) == 0x0040
-				|| tp->duplex_lock;
+		int duplex = ((lpar & 0x0100) || (lpar & 0x01C0) == 0x0040 ||
+			      tp->duplex_lock);
 		if (tp->full_duplex != duplex) {
 			tp->full_duplex = duplex;
 			NETDRV_W8 (Cfg9346, Cfg9346_Unlock);
@@ -1820,8 +1820,8 @@
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index b58965a..17a2722 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -118,14 +118,6 @@
 /* Autodetect link polarity reversal? */
 INT_MODULE_PARM(auto_polarity, 1);
 
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"3c574_cs.c 1.65ac1 2003/04/07 Donald Becker/David Hinds, becker@scyld.com.\n";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -278,7 +270,7 @@
 	struct el3_private *lp;
 	struct net_device *dev;
 
-	DEBUG(0, "3c574_attach()\n");
+	dev_dbg(&link->dev, "3c574_attach()\n");
 
 	/* Create the PC card device object. */
 	dev = alloc_etherdev(sizeof(struct el3_private));
@@ -291,10 +283,8 @@
 	spin_lock_init(&lp->window_lock);
 	link->io.NumPorts1 = 32;
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = &el3_interrupt;
-	link->irq.Instance = dev;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
@@ -319,7 +309,7 @@
 {
 	struct net_device *dev = link->priv;
 
-	DEBUG(0, "3c574_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "3c574_detach()\n");
 
 	if (link->dev_node)
 		unregister_netdev(dev);
@@ -335,26 +325,23 @@
 	ethernet device available to the system.
 */
 
-#define CS_CHECK(fn, ret) \
-  do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
 
 static int tc574_config(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	struct el3_private *lp = netdev_priv(dev);
-	tuple_t tuple;
-	__le16 buf[32];
-	int last_fn, last_ret, i, j;
+	int ret, i, j;
 	unsigned int ioaddr;
 	__be16 *phys_addr;
 	char *cardname;
 	__u32 config;
+	u8 *buf;
+	size_t len;
 
 	phys_addr = (__be16 *)dev->dev_addr;
 
-	DEBUG(0, "3c574_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "3c574_config()\n");
 
 	link->io.IOAddrLines = 16;
 	for (i = j = 0; j < 0x400; j += 0x20) {
@@ -363,12 +350,16 @@
 		if (i == 0)
 			break;
 	}
-	if (i != 0) {
-		cs_error(link, RequestIO, i);
+	if (i != 0)
 		goto failed;
-	}
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	dev->irq = link->irq.AssignedIRQ;
 	dev->base_addr = link->io.BasePort1;
@@ -378,16 +369,14 @@
 	/* The 3c574 normally uses an EEPROM for configuration info, including
 	   the hardware address.  The future products may include a modem chip
 	   and put the address in the CIS. */
-	tuple.Attributes = 0;
-	tuple.TupleData = (cisdata_t *)buf;
-	tuple.TupleDataMax = 64;
-	tuple.TupleOffset = 0;
-	tuple.DesiredTuple = 0x88;
-	if (pcmcia_get_first_tuple(link, &tuple) == 0) {
-		pcmcia_get_tuple_data(link, &tuple);
+
+	len = pcmcia_get_tuple(link, 0x88, &buf);
+	if (buf && len >= 6) {
 		for (i = 0; i < 3; i++)
-			phys_addr[i] = htons(le16_to_cpu(buf[i]));
+			phys_addr[i] = htons(le16_to_cpu(buf[i * 2]));
+		kfree(buf);
 	} else {
+		kfree(buf); /* 0 < len < 6 */
 		EL3WINDOW(0);
 		for (i = 0; i < 3; i++)
 			phys_addr[i] = htons(read_eeprom(ioaddr, i + 10));
@@ -435,7 +424,8 @@
 			mii_status = mdio_read(ioaddr, phy & 0x1f, 1);
 			if (mii_status != 0xffff) {
 				lp->phys = phy & 0x1f;
-				DEBUG(0, "  MII transceiver at index %d, status %x.\n",
+				dev_dbg(&link->dev, "  MII transceiver at "
+					"index %d, status %x.\n",
 					  phy, mii_status);
 				if ((mii_status & 0x0040) == 0)
 					mii_preamble_required = 1;
@@ -457,7 +447,7 @@
 	}
 
 	link->dev_node = &lp->node;
-	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	SET_NETDEV_DEV(dev, &link->dev);
 
 	if (register_netdev(dev) != 0) {
 		printk(KERN_NOTICE "3c574_cs: register_netdev() failed\n");
@@ -478,8 +468,6 @@
 
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	tc574_release(link);
 	return -ENODEV;
@@ -738,7 +726,7 @@
 	lp->media.expires = jiffies + HZ;
 	add_timer(&lp->media);
 	
-	DEBUG(2, "%s: opened, status %4.4x.\n",
+	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
 		  dev->name, inw(dev->base_addr + EL3_STATUS));
 	
 	return 0;
@@ -772,7 +760,7 @@
 		if (tx_status & 0x30)
 			tc574_wait_for_completion(dev, TxReset);
 		if (tx_status & 0x38) {
-			DEBUG(1, "%s: transmit error: status 0x%02x\n",
+			pr_debug("%s: transmit error: status 0x%02x\n",
 				  dev->name, tx_status);
 			outw(TxEnable, ioaddr + EL3_CMD);
 			dev->stats.tx_aborted_errors++;
@@ -788,7 +776,7 @@
 	struct el3_private *lp = netdev_priv(dev);
 	unsigned long flags;
 
-	DEBUG(3, "%s: el3_start_xmit(length = %ld) called, "
+	pr_debug("%s: el3_start_xmit(length = %ld) called, "
 		  "status %4.4x.\n", dev->name, (long)skb->len,
 		  inw(ioaddr + EL3_STATUS));
 
@@ -827,7 +815,7 @@
 		return IRQ_NONE;
 	ioaddr = dev->base_addr;
 
-	DEBUG(3, "%s: interrupt, status %4.4x.\n",
+	pr_debug("%s: interrupt, status %4.4x.\n",
 		  dev->name, inw(ioaddr + EL3_STATUS));
 
 	spin_lock(&lp->window_lock);
@@ -836,7 +824,7 @@
 		   (IntLatch | RxComplete | RxEarly | StatsFull)) {
 		if (!netif_device_present(dev) ||
 			((status & 0xe000) != 0x2000)) {
-			DEBUG(1, "%s: Interrupt from dead card\n", dev->name);
+			pr_debug("%s: Interrupt from dead card\n", dev->name);
 			break;
 		}
 
@@ -846,7 +834,7 @@
 			work_budget = el3_rx(dev, work_budget);
 
 		if (status & TxAvailable) {
-			DEBUG(3, "  TX room bit was handled.\n");
+			pr_debug("  TX room bit was handled.\n");
 			/* There's room in the FIFO for a full-sized packet. */
 			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 			netif_wake_queue(dev);
@@ -886,7 +874,7 @@
 		}
 
 		if (--work_budget < 0) {
-			DEBUG(0, "%s: Too much work in interrupt, "
+			pr_debug("%s: Too much work in interrupt, "
 				  "status %4.4x.\n", dev->name, status);
 			/* Clear all interrupts */
 			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -896,7 +884,7 @@
 		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
 	}
 
-	DEBUG(3, "%s: exiting interrupt, status %4.4x.\n",
+	pr_debug("%s: exiting interrupt, status %4.4x.\n",
 		  dev->name, inw(ioaddr + EL3_STATUS));
 		  
 	spin_unlock(&lp->window_lock);
@@ -1003,7 +991,7 @@
 	unsigned int ioaddr = dev->base_addr;
 	u8 rx, tx, up;
 
-	DEBUG(2, "%s: updating the statistics.\n", dev->name);
+	pr_debug("%s: updating the statistics.\n", dev->name);
 
 	if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */
 		return;
@@ -1039,7 +1027,7 @@
 	unsigned int ioaddr = dev->base_addr;
 	short rx_status;
 	
-	DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+	pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 		  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
 	while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
 			worklimit > 0) {
@@ -1061,7 +1049,7 @@
 
 			skb = dev_alloc_skb(pkt_len+5);
 
-			DEBUG(3, "  Receiving packet size %d status %4.4x.\n",
+			pr_debug("  Receiving packet size %d status %4.4x.\n",
 				  pkt_len, rx_status);
 			if (skb != NULL) {
 				skb_reserve(skb, 2);
@@ -1072,7 +1060,7 @@
 				dev->stats.rx_packets++;
 				dev->stats.rx_bytes += pkt_len;
 			} else {
-				DEBUG(1, "%s: couldn't allocate a sk_buff of"
+				pr_debug("%s: couldn't allocate a sk_buff of"
 					  " size %d.\n", dev->name, pkt_len);
 				dev->stats.rx_dropped++;
 			}
@@ -1101,7 +1089,7 @@
 	struct mii_ioctl_data *data = if_mii(rq);
 	int phy = lp->phys & 0x1f;
 
-	DEBUG(2, "%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
+	pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
 		  dev->name, rq->ifr_ifrn.ifrn_name, cmd,
 		  data->phy_id, data->reg_num, data->val_in, data->val_out);
 
@@ -1178,7 +1166,7 @@
 	struct el3_private *lp = netdev_priv(dev);
 	struct pcmcia_device *link = lp->p_dev;
 
-	DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
+	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
 	
 	if (pcmcia_dev_present(link)) {
 		unsigned long flags;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 569fb06..6f8d7e2 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -130,14 +130,6 @@
 /* Special hook for setting if_port when module is loaded */
 INT_MODULE_PARM(if_port, 0);
 
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-DRV_NAME ".c " DRV_VERSION " 2001/10/13 00:08:50 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -189,7 +181,7 @@
     struct el3_private *lp;
     struct net_device *dev;
 
-    DEBUG(0, "3c589_attach()\n");
+    dev_dbg(&link->dev, "3c589_attach()\n");
 
     /* Create new ethernet device */
     dev = alloc_etherdev(sizeof(struct el3_private));
@@ -202,10 +194,8 @@
     spin_lock_init(&lp->lock);
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.Handler = &el3_interrupt;
-    link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
@@ -231,7 +221,7 @@
 {
     struct net_device *dev = link->priv;
 
-    DEBUG(0, "3c589_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "3c589_detach\n");
 
     if (link->dev_node)
 	unregister_netdev(dev);
@@ -249,29 +239,20 @@
     
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int tc589_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     struct el3_private *lp = netdev_priv(dev);
-    tuple_t tuple;
-    __le16 buf[32];
     __be16 *phys_addr;
-    int last_fn, last_ret, i, j, multi = 0, fifo;
+    int ret, i, j, multi = 0, fifo;
     unsigned int ioaddr;
     char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+    u8 *buf;
+    size_t len;
     
-    DEBUG(0, "3c589_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "3c589_config\n");
 
     phys_addr = (__be16 *)dev->dev_addr;
-    tuple.Attributes = 0;
-    tuple.TupleData = (cisdata_t *)buf;
-    tuple.TupleDataMax = sizeof(buf);
-    tuple.TupleOffset = 0;
-    tuple.Attributes = TUPLE_RETURN_COMMON;
-
     /* Is this a 3c562? */
     if (link->manf_id != MANFID_3COM)
 	    printk(KERN_INFO "3c589_cs: hmmm, is this really a "
@@ -287,12 +268,16 @@
 	if (i == 0)
 		break;
     }
-    if (i != 0) {
-	cs_error(link, RequestIO, i);
+    if (i != 0)
 	goto failed;
-    }
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 	
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
@@ -301,12 +286,13 @@
 
     /* The 3c589 has an extra EEPROM for configuration info, including
        the hardware address.  The 3c562 puts the address in the CIS. */
-    tuple.DesiredTuple = 0x88;
-    if (pcmcia_get_first_tuple(link, &tuple) == 0) {
-	pcmcia_get_tuple_data(link, &tuple);
-	for (i = 0; i < 3; i++)
-	    phys_addr[i] = htons(le16_to_cpu(buf[i]));
+    len = pcmcia_get_tuple(link, 0x88, &buf);
+    if (buf && len >= 6) {
+	    for (i = 0; i < 3; i++)
+		    phys_addr[i] = htons(le16_to_cpu(buf[i*2]));
+	    kfree(buf);
     } else {
+	kfree(buf); /* 0 < len < 6 */
 	for (i = 0; i < 3; i++)
 	    phys_addr[i] = htons(read_eeprom(ioaddr, i));
 	if (phys_addr[0] == htons(0x6060)) {
@@ -328,7 +314,7 @@
 	printk(KERN_ERR "3c589_cs: invalid if_port requested\n");
     
     link->dev_node = &lp->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_ERR "3c589_cs: register_netdev() failed\n");
@@ -347,8 +333,6 @@
 	   if_names[dev->if_port]);
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     tc589_release(link);
     return -ENODEV;
@@ -511,24 +495,8 @@
 	sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
 }
 
-#ifdef PCMCIA_DEBUG
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
-	return pc_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
-	pc_debug = level;
-}
-#endif /* PCMCIA_DEBUG */
-
 static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
-#ifdef PCMCIA_DEBUG
-	.get_msglevel		= netdev_get_msglevel,
-	.set_msglevel		= netdev_set_msglevel,
-#endif /* PCMCIA_DEBUG */
 };
 
 static int el3_config(struct net_device *dev, struct ifmap *map)
@@ -563,7 +531,7 @@
     lp->media.expires = jiffies + HZ;
     add_timer(&lp->media);
 
-    DEBUG(1, "%s: opened, status %4.4x.\n",
+    dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
 	  dev->name, inw(dev->base_addr + EL3_STATUS));
     
     return 0;
@@ -596,7 +564,7 @@
 	if (tx_status & 0x30)
 	    tc589_wait_for_completion(dev, TxReset);
 	if (tx_status & 0x38) {
-	    DEBUG(1, "%s: transmit error: status 0x%02x\n",
+	    pr_debug("%s: transmit error: status 0x%02x\n",
 		  dev->name, tx_status);
 	    outw(TxEnable, ioaddr + EL3_CMD);
 	    dev->stats.tx_aborted_errors++;
@@ -612,7 +580,7 @@
     struct el3_private *priv = netdev_priv(dev);
     unsigned long flags;
 
-    DEBUG(3, "%s: el3_start_xmit(length = %ld) called, "
+    pr_debug("%s: el3_start_xmit(length = %ld) called, "
 	  "status %4.4x.\n", dev->name, (long)skb->len,
 	  inw(ioaddr + EL3_STATUS));
 
@@ -654,14 +622,14 @@
 
     ioaddr = dev->base_addr;
 
-    DEBUG(3, "%s: interrupt, status %4.4x.\n",
+    pr_debug("%s: interrupt, status %4.4x.\n",
 	  dev->name, inw(ioaddr + EL3_STATUS));
 
     spin_lock(&lp->lock);    
     while ((status = inw(ioaddr + EL3_STATUS)) &
 	(IntLatch | RxComplete | StatsFull)) {
 	if ((status & 0xe000) != 0x2000) {
-	    DEBUG(1, "%s: interrupt from dead card\n", dev->name);
+	    pr_debug("%s: interrupt from dead card\n", dev->name);
 	    handled = 0;
 	    break;
 	}
@@ -670,7 +638,7 @@
 	    el3_rx(dev);
 	
 	if (status & TxAvailable) {
-	    DEBUG(3, "    TX room bit was handled.\n");
+	    pr_debug("    TX room bit was handled.\n");
 	    /* There's room in the FIFO for a full-sized packet. */
 	    outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
 	    netif_wake_queue(dev);
@@ -722,7 +690,7 @@
 
     lp->last_irq = jiffies;
     spin_unlock(&lp->lock);    
-    DEBUG(3, "%s: exiting interrupt, status %4.4x.\n",
+    pr_debug("%s: exiting interrupt, status %4.4x.\n",
 	  dev->name, inw(ioaddr + EL3_STATUS));
     return IRQ_RETVAL(handled);
 }
@@ -833,7 +801,7 @@
 {
     unsigned int ioaddr = dev->base_addr;
 
-    DEBUG(2, "%s: updating the statistics.\n", dev->name);
+    pr_debug("%s: updating the statistics.\n", dev->name);
     /* Turn off statistics updates while reading. */
     outw(StatsDisable, ioaddr + EL3_CMD);
     /* Switch to the stats window, and read everything. */
@@ -861,7 +829,7 @@
     int worklimit = 32;
     short rx_status;
     
-    DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+    pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 	  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
     while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
 		    worklimit > 0) {
@@ -883,7 +851,7 @@
 	    
 	    skb = dev_alloc_skb(pkt_len+5);
 	    
-	    DEBUG(3, "    Receiving packet size %d status %4.4x.\n",
+	    pr_debug("    Receiving packet size %d status %4.4x.\n",
 		  pkt_len, rx_status);
 	    if (skb != NULL) {
 		skb_reserve(skb, 2);
@@ -894,7 +862,7 @@
 		dev->stats.rx_packets++;
 		dev->stats.rx_bytes += pkt_len;
 	    } else {
-		DEBUG(1, "%s: couldn't allocate a sk_buff of"
+		pr_debug("%s: couldn't allocate a sk_buff of"
 		      " size %d.\n", dev->name, pkt_len);
 		dev->stats.rx_dropped++;
 	    }
@@ -935,7 +903,7 @@
     struct pcmcia_device *link = lp->p_dev;
     unsigned int ioaddr = dev->base_addr;
     
-    DEBUG(1, "%s: shutting down ethercard.\n", dev->name);
+    dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
 
     if (pcmcia_dev_present(link)) {
 	/* Turn off statistics ASAP.  We update dev->stats below. */
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3131a59..81bafd5 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -75,16 +75,6 @@
 MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver");
 MODULE_LICENSE("GPL");
 
-#ifdef PCMCIA_DEBUG
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"axnet_cs.c 1.28 2002/06/29 06:27:37 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -167,7 +157,7 @@
     struct net_device *dev;
     struct ei_device *ei_local;
 
-    DEBUG(0, "axnet_attach()\n");
+    dev_dbg(&link->dev, "axnet_attach()\n");
 
     dev = alloc_etherdev(sizeof(struct ei_device) + sizeof(axnet_dev_t));
     if (!dev)
@@ -180,7 +170,6 @@
     info->p_dev = link;
     link->priv = dev;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -205,7 +194,7 @@
 {
     struct net_device *dev = link->priv;
 
-    DEBUG(0, "axnet_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link);
 
     if (link->dev_node)
 	unregister_netdev(dev);
@@ -272,9 +261,6 @@
 
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
@@ -341,26 +327,29 @@
 {
     struct net_device *dev = link->priv;
     axnet_dev_t *info = PRIV(dev);
-    int i, j, j2, last_ret, last_fn;
+    int i, j, j2, ret;
 
-    DEBUG(0, "axnet_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "axnet_config(0x%p)\n", link);
 
     /* don't trust the CIS on this; Linksys got it wrong */
     link->conf.Present = 0x63;
-    last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
-    if (last_ret != 0) {
-	cs_error(link, RequestIO, last_ret);
+    ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
+    if (ret != 0)
 	goto failed;
-    }
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
     
     if (link->io.NumPorts2 == 8) {
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
 	link->conf.Status = CCSR_AUDIO_ENA;
     }
     
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
+
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
 
@@ -410,7 +399,7 @@
 
     info->phy_id = (i < 32) ? i : -1;
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
@@ -426,14 +415,12 @@
 	   dev->base_addr, dev->irq,
 	   dev->dev_addr);
     if (info->phy_id != -1) {
-	DEBUG(0, "  MII transceiver at index %d, status %x.\n", info->phy_id, j);
+	dev_dbg(&link->dev, "  MII transceiver at index %d, status %x.\n", info->phy_id, j);
     } else {
 	printk(KERN_NOTICE "  No MII transceivers found!\n");
     }
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     axnet_release(link);
     return -ENODEV;
@@ -543,7 +530,7 @@
     struct pcmcia_device *link = info->p_dev;
     unsigned int nic_base = dev->base_addr;
     
-    DEBUG(2, "axnet_open('%s')\n", dev->name);
+    dev_dbg(&link->dev, "axnet_open('%s')\n", dev->name);
 
     if (!pcmcia_dev_present(link))
 	return -ENODEV;
@@ -572,7 +559,7 @@
     axnet_dev_t *info = PRIV(dev);
     struct pcmcia_device *link = info->p_dev;
 
-    DEBUG(2, "axnet_close('%s')\n", dev->name);
+    dev_dbg(&link->dev, "axnet_close('%s')\n", dev->name);
 
     ax_close(dev);
     free_irq(dev->irq, dev);
@@ -741,10 +728,8 @@
     int xfer_count = count;
     char *buf = skb->data;
 
-#ifdef PCMCIA_DEBUG
     if ((ei_debug > 4) && (count != 4))
-	printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
-#endif
+	    pr_debug("%s: [bi=%d]\n", dev->name, count+4);
     outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
     outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
     outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
@@ -762,10 +747,7 @@
 {
     unsigned int nic_base = dev->base_addr;
 
-#ifdef PCMCIA_DEBUG
-    if (ei_debug > 4)
-	printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
-#endif
+    pr_debug("%s: [bo=%d]\n", dev->name, count);
 
     /* Round the count up for word writes.  Do we need to do this?
        What effect will an odd byte count have on the 8390?
@@ -1232,8 +1214,8 @@
 	ei_local->irqlock = 1;
    
 	/* !!Assumption!! -- we stay in page 0.	 Don't break this. */
-	while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0
-		   && ++nr_serviced < MAX_SERVICE) 
+	while ((interrupts = inb_p(e8390_base + EN0_ISR)) != 0 &&
+	       ++nr_serviced < MAX_SERVICE)
 	{
 		if (!netif_running(dev) || (interrupts == 0xff)) {
 			if (ei_debug > 1)
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 7b5c77b7..21d9c9d8 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -53,11 +53,7 @@
 
 #define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
 
-#ifdef PCMCIA_DEBUG
-
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+#ifdef DEBUG
 
 static void regdump(struct net_device *dev)
 {
@@ -92,7 +88,6 @@
 
 #else
 
-#define DEBUG(n, args...) do { } while (0)
 static inline void regdump(struct net_device *dev) { }
 
 #endif
@@ -144,7 +139,7 @@
     struct net_device *dev;
     struct arcnet_local *lp;
 
-    DEBUG(0, "com20020_attach()\n");
+    dev_dbg(&p_dev->dev, "com20020_attach()\n");
 
     /* Create new network device */
     info = kzalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
@@ -169,11 +164,10 @@
     p_dev->io.NumPorts1 = 16;
     p_dev->io.IOAddrLines = 16;
     p_dev->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-    p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
-    p_dev->irq.Instance = info->dev = dev;
+    info->dev = dev;
     p_dev->priv = info;
 
     return com20020_config(p_dev);
@@ -198,12 +192,12 @@
     struct com20020_dev_t *info = link->priv;
     struct net_device *dev = info->dev;
 
-    DEBUG(1,"detach...\n");
+    dev_dbg(&link->dev, "detach...\n");
 
-    DEBUG(0, "com20020_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "com20020_detach\n");
 
     if (link->dev_node) {
-	DEBUG(1,"unregister...\n");
+	dev_dbg(&link->dev, "unregister...\n");
 
 	unregister_netdev(dev);
 
@@ -218,16 +212,16 @@
     com20020_release(link);
 
     /* Unlink device structure, free bits */
-    DEBUG(1,"unlinking...\n");
+    dev_dbg(&link->dev, "unlinking...\n");
     if (link->priv)
     {
 	dev = info->dev;
 	if (dev)
 	{
-	    DEBUG(1,"kfree...\n");
+	    dev_dbg(&link->dev, "kfree...\n");
 	    free_netdev(dev);
 	}
-	DEBUG(1,"kfree2...\n");
+	dev_dbg(&link->dev, "kfree2...\n");
 	kfree(info);
     }
 
@@ -241,25 +235,22 @@
 
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int com20020_config(struct pcmcia_device *link)
 {
     struct arcnet_local *lp;
     com20020_dev_t *info;
     struct net_device *dev;
-    int i, last_ret, last_fn;
+    int i, ret;
     int ioaddr;
 
     info = link->priv;
     dev = info->dev;
 
-    DEBUG(1,"config...\n");
+    dev_dbg(&link->dev, "config...\n");
 
-    DEBUG(0, "com20020_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "com20020_config\n");
 
-    DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
+    dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1);
     i = -ENODEV;
     if (!link->io.BasePort1)
     {
@@ -276,26 +267,27 @@
     
     if (i != 0)
     {
-	DEBUG(1,"arcnet: requestIO failed totally!\n");
+	dev_dbg(&link->dev, "requestIO failed totally!\n");
 	goto failed;
     }
 	
     ioaddr = dev->base_addr = link->io.BasePort1;
-    DEBUG(1,"arcnet: got ioaddr %Xh\n", ioaddr);
+    dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
 
-    DEBUG(1,"arcnet: request IRQ %d (%Xh/%Xh)\n",
-	   link->irq.AssignedIRQ,
-	   link->irq.IRQInfo1, link->irq.IRQInfo2);
+    dev_dbg(&link->dev, "request IRQ %d\n",
+	    link->irq.AssignedIRQ);
     i = pcmcia_request_irq(link, &link->irq);
     if (i != 0)
     {
-	DEBUG(1,"arcnet: requestIRQ failed totally!\n");
+	dev_dbg(&link->dev, "requestIRQ failed totally!\n");
 	goto failed;
     }
 
     dev->irq = link->irq.AssignedIRQ;
 
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     if (com20020_check(dev))
     {
@@ -308,26 +300,25 @@
     lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
 
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     i = com20020_found(dev, 0);	/* calls register_netdev */
     
     if (i != 0) {
-	DEBUG(1,KERN_NOTICE "com20020_cs: com20020_found() failed\n");
+	dev_printk(KERN_NOTICE, &link->dev,
+		"com20020_cs: com20020_found() failed\n");
 	link->dev_node = NULL;
 	goto failed;
     }
 
     strcpy(info->node.dev_name, dev->name);
 
-    DEBUG(1,KERN_INFO "%s: port %#3lx, irq %d\n",
+    dev_dbg(&link->dev,KERN_INFO "%s: port %#3lx, irq %d\n",
            dev->name, dev->base_addr, dev->irq);
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
-    DEBUG(1,"com20020_config failed...\n");
+    dev_dbg(&link->dev, "com20020_config failed...\n");
     com20020_release(link);
     return -ENODEV;
 } /* com20020_config */
@@ -342,7 +333,7 @@
 
 static void com20020_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "com20020_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "com20020_release\n");
 	pcmcia_disable_device(link);
 }
 
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 7e01fbd..8ad8384 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -72,13 +72,6 @@
 /* 0:4KB*2 TX buffer   else:8KB*2 TX buffer */
 INT_MODULE_PARM(sram_config, 0);
 
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = DRV_NAME ".c " DRV_VERSION " 2002/03/23";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 /*
@@ -245,7 +238,7 @@
     local_info_t *lp;
     struct net_device *dev;
 
-    DEBUG(0, "fmvj18x_attach()\n");
+    dev_dbg(&link->dev, "fmvj18x_attach()\n");
 
     /* Make up a FMVJ18x specific data structure */
     dev = alloc_etherdev(sizeof(local_info_t));
@@ -262,10 +255,8 @@
     link->io.IOAddrLines = 5;
 
     /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->irq.Handler = &fjn_interrupt;
-    link->irq.Instance = dev;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+    link->irq.Handler = fjn_interrupt;
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
@@ -285,7 +276,7 @@
 {
     struct net_device *dev = link->priv;
 
-    DEBUG(0, "fmvj18x_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "fmvj18x_detach\n");
 
     if (link->dev_node)
 	unregister_netdev(dev);
@@ -297,9 +288,6 @@
 
 /*====================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int mfc_try_io_port(struct pcmcia_device *link)
 {
     int i, ret;
@@ -341,39 +329,44 @@
     return ret;	/* RequestIO failed */
 }
 
+static int fmvj18x_ioprobe(struct pcmcia_device *p_dev,
+			   cistpl_cftable_entry_t *cfg,
+			   cistpl_cftable_entry_t *dflt,
+			   unsigned int vcc,
+			   void *priv_data)
+{
+	return 0; /* strange, but that's what the code did already before... */
+}
+
 static int fmvj18x_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     local_info_t *lp = netdev_priv(dev);
-    tuple_t tuple;
-    cisparse_t parse;
-    u_short buf[32];
-    int i, last_fn = 0, last_ret = 0, ret;
+    int i, ret;
     unsigned int ioaddr;
     cardtype_t cardtype;
     char *card_name = "unknown";
-    u_char *node_id;
+    u8 *buf;
+    size_t len;
+    u_char buggybuf[32];
 
-    DEBUG(0, "fmvj18x_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "fmvj18x_config\n");
 
-    tuple.TupleData = (u_char *)buf;
-    tuple.TupleDataMax = 64;
-    tuple.TupleOffset = 0;
-    tuple.DesiredTuple = CISTPL_FUNCE;
-    tuple.TupleOffset = 0;
-    if (pcmcia_get_first_tuple(link, &tuple) == 0) {
+    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+    kfree(buf);
+
+    if (len) {
 	/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-	CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
-	link->conf.ConfigIndex = parse.cftable_entry.index;
+	ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL);
+	if (ret != 0)
+		goto failed;
+
 	switch (link->manf_id) {
 	case MANFID_TDK:
 	    cardtype = TDK;
-	    if (link->card_id == PRODID_TDK_GN3410
-			|| link->card_id == PRODID_TDK_NP9610
-			|| link->card_id == PRODID_TDK_MN3200) {
+	    if (link->card_id == PRODID_TDK_GN3410 ||
+		link->card_id == PRODID_TDK_NP9610 ||
+		link->card_id == PRODID_TDK_MN3200) {
 		/* MultiFunction Card */
 		link->conf.ConfigBase = 0x800;
 		link->conf.ConfigIndex = 0x47;
@@ -433,17 +426,24 @@
 
     if (link->io.NumPorts2 != 0) {
     	link->irq.Attributes =
-		IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+		IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 	ret = mfc_try_io_port(link);
-	if (ret != 0) goto cs_failed;
+	if (ret != 0) goto failed;
     } else if (cardtype == UNGERMANN) {
 	ret = ungermann_try_io_port(link);
-	if (ret != 0) goto cs_failed;
+	if (ret != 0) goto failed;
     } else { 
-	CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
+	    ret = pcmcia_request_io(link, &link->io);
+	    if (ret)
+		    goto failed;
     }
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
+
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
 
@@ -474,21 +474,21 @@
     case CONTEC:
     case NEC:
     case KME:
-	tuple.DesiredTuple = CISTPL_FUNCE;
-	tuple.TupleOffset = 0;
-	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-	tuple.TupleOffset = 0;
-	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
 	if (cardtype == MBH10304) {
-	    /* MBH10304's CIS_FUNCE is corrupted */
-	    node_id = &(tuple.TupleData[5]);
 	    card_name = "FMV-J182";
-	} else {
-	    while (tuple.TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID ) {
-		CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
-		CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
+
+	    len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf);
+	    if (len < 11) {
+		    kfree(buf);
+		    goto failed;
 	    }
-	    node_id = &(tuple.TupleData[2]);
+	    /* Read MACID from CIS */
+	    for (i = 5; i < 11; i++)
+		    dev->dev_addr[i] = buf[i];
+	    kfree(buf);
+	} else {
+	    if (pcmcia_get_mac_from_cis(link, dev))
+		goto failed;
 	    if( cardtype == TDK ) {
 		card_name = "TDK LAK-CD021";
 	    } else if( cardtype == LA501 ) {
@@ -501,9 +501,6 @@
 		card_name = "C-NET(PC)C";
 	    }
 	}
-	/* Read MACID from CIS */
-	for (i = 0; i < 6; i++)
-	    dev->dev_addr[i] = node_id[i];
 	break;
     case UNGERMANN:
 	/* Read MACID from register */
@@ -513,12 +510,12 @@
 	break;
     case XXX10304:
 	/* Read MACID from Buggy CIS */
-	if (fmvj18x_get_hwinfo(link, tuple.TupleData) == -1) {
+	if (fmvj18x_get_hwinfo(link, buggybuf) == -1) {
 	    printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n");
 	    goto failed;
 	}
 	for (i = 0 ; i < 6; i++) {
-	    dev->dev_addr[i] = tuple.TupleData[i];
+	    dev->dev_addr[i] = buggybuf[i];
 	}
 	card_name = "FMV-J182";
 	break;
@@ -533,7 +530,7 @@
 
     lp->cardtype = cardtype;
     link->dev_node = &lp->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
@@ -551,9 +548,6 @@
 
     return 0;
     
-cs_failed:
-    /* All Card Services errors end up here */
-    cs_error(link, last_fn, last_ret);
 failed:
     fmvj18x_release(link);
     return -ENODEV;
@@ -571,16 +565,14 @@
     req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
     req.Base = 0; req.Size = 0;
     req.AccessSpeed = 0;
-    i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != 0) {
-	cs_error(link, RequestWindow, i);
+    i = pcmcia_request_window(link, &req, &link->win);
+    if (i != 0)
 	return -1;
-    }
 
     base = ioremap(req.Base, req.Size);
     mem.Page = 0;
     mem.CardOffset = 0;
-    pcmcia_map_mem_page(link->win, &mem);
+    pcmcia_map_mem_page(link, link->win, &mem);
 
     /*
      *  MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
@@ -590,11 +582,11 @@
     */ 
     for (i = 0; i < 0x200; i++) {
 	if (readb(base+i*2) == 0x22) {	
-	    if (readb(base+(i-1)*2) == 0xff
-	     && readb(base+(i+5)*2) == 0x04
-	     && readb(base+(i+6)*2) == 0x06
-	     && readb(base+(i+13)*2) == 0xff) 
-		break;
+		if (readb(base+(i-1)*2) == 0xff &&
+		    readb(base+(i+5)*2) == 0x04 &&
+		    readb(base+(i+6)*2) == 0x06 &&
+		    readb(base+(i+13)*2) == 0xff)
+			break;
 	}
     }
 
@@ -605,9 +597,7 @@
     }
 
     iounmap(base);
-    j = pcmcia_release_window(link->win);
-    if (j != 0)
-	cs_error(link, ReleaseWindow, j);
+    j = pcmcia_release_window(link, link->win);
     return (i != 0x200) ? 0 : -1;
 
 } /* fmvj18x_get_hwinfo */
@@ -626,11 +616,9 @@
     req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
     req.Base = 0; req.Size = 0;
     req.AccessSpeed = 0;
-    i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != 0) {
-	cs_error(link, RequestWindow, i);
+    i = pcmcia_request_window(link, &req, &link->win);
+    if (i != 0)
 	return -1;
-    }
 
     lp->base = ioremap(req.Base, req.Size);
     if (lp->base == NULL) {
@@ -640,11 +628,10 @@
 
     mem.Page = 0;
     mem.CardOffset = 0;
-    i = pcmcia_map_mem_page(link->win, &mem);
+    i = pcmcia_map_mem_page(link, link->win, &mem);
     if (i != 0) {
 	iounmap(lp->base);
 	lp->base = NULL;
-	cs_error(link, MapMemPage, i);
 	return -1;
     }
     
@@ -671,15 +658,13 @@
     u_char __iomem *tmp;
     int j;
 
-    DEBUG(0, "fmvj18x_release(0x%p)\n", link);
+    dev_dbg(&link->dev, "fmvj18x_release\n");
 
     if (lp->base != NULL) {
 	tmp = lp->base;
 	lp->base = NULL;    /* set NULL before iounmap */
 	iounmap(tmp);
-	j = pcmcia_release_window(link->win);
-	if (j != 0)
-	    cs_error(link, ReleaseWindow, j);
+	j = pcmcia_release_window(link, link->win);
     }
 
     pcmcia_disable_device(link);
@@ -788,8 +773,8 @@
     outb(tx_stat, ioaddr + TX_STATUS);
     outb(rx_stat, ioaddr + RX_STATUS);
     
-    DEBUG(4, "%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
-    DEBUG(4, "               tx_status %02x.\n", tx_stat);
+    pr_debug("%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
+    pr_debug("               tx_status %02x.\n", tx_stat);
     
     if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 	/* there is packet(s) in rx buffer */
@@ -809,8 +794,8 @@
 	}
 	netif_wake_queue(dev);
     }
-    DEBUG(4, "%s: exiting interrupt,\n", dev->name);
-    DEBUG(4, "    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
+    pr_debug("%s: exiting interrupt,\n", dev->name);
+    pr_debug("    tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
 
     outb(D_TX_INTR, ioaddr + TX_INTR);
     outb(D_RX_INTR, ioaddr + RX_INTR);
@@ -882,7 +867,7 @@
 	    return NETDEV_TX_BUSY;
 	}
 
-	DEBUG(4, "%s: Transmitting a packet of length %lu.\n",
+	pr_debug("%s: Transmitting a packet of length %lu.\n",
 	      dev->name, (unsigned long)skb->len);
 	dev->stats.tx_bytes += skb->len;
 
@@ -937,7 +922,7 @@
     unsigned int ioaddr = dev->base_addr;
     int i;
 
-    DEBUG(4, "fjn_reset(%s) called.\n",dev->name);
+    pr_debug("fjn_reset(%s) called.\n",dev->name);
 
     /* Reset controller */
     if( sram_config == 0 ) 
@@ -1015,13 +1000,13 @@
     unsigned int ioaddr = dev->base_addr;
     int boguscount = 10;	/* 5 -> 10: by agy 19940922 */
 
-    DEBUG(4, "%s: in rx_packet(), rx_status %02x.\n",
+    pr_debug("%s: in rx_packet(), rx_status %02x.\n",
 	  dev->name, inb(ioaddr + RX_STATUS));
 
     while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
 	u_short status = inw(ioaddr + DATAPORT);
 
-	DEBUG(4, "%s: Rxing packet mode %02x status %04x.\n",
+	pr_debug("%s: Rxing packet mode %02x status %04x.\n",
 	      dev->name, inb(ioaddr + RX_MODE), status);
 #ifndef final_version
 	if (status == 0) {
@@ -1061,16 +1046,14 @@
 		 (pkt_len + 1) >> 1);
 	    skb->protocol = eth_type_trans(skb, dev);
 
-#ifdef PCMCIA_DEBUG
-	    if (pc_debug > 5) {
+	    {
 		int i;
-		printk(KERN_DEBUG "%s: Rxed packet of length %d: ",
-		       dev->name, pkt_len);
+		pr_debug("%s: Rxed packet of length %d: ",
+			dev->name, pkt_len);
 		for (i = 0; i < 14; i++)
-		    printk(" %02x", skb->data[i]);
-		printk(".\n");
+			pr_debug(" %02x", skb->data[i]);
+		pr_debug(".\n");
 	    }
-#endif
 
 	    netif_rx(skb);
 	    dev->stats.rx_packets++;
@@ -1094,7 +1077,7 @@
 	}
 
 	if (i > 0)
-	    DEBUG(5, "%s: Exint Rx packet with mode %02x after "
+	    pr_debug("%s: Exint Rx packet with mode %02x after "
 		  "%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
     }
 */
@@ -1112,24 +1095,8 @@
 	sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
 }
 
-#ifdef PCMCIA_DEBUG
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
-	return pc_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
-	pc_debug = level;
-}
-#endif /* PCMCIA_DEBUG */
-
 static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
-#ifdef PCMCIA_DEBUG
-	.get_msglevel		= netdev_get_msglevel,
-	.set_msglevel		= netdev_set_msglevel,
-#endif /* PCMCIA_DEBUG */
 };
 
 static int fjn_config(struct net_device *dev, struct ifmap *map){
@@ -1141,7 +1108,7 @@
     struct local_info_t *lp = netdev_priv(dev);
     struct pcmcia_device *link = lp->p_dev;
 
-    DEBUG(4, "fjn_open('%s').\n", dev->name);
+    pr_debug("fjn_open('%s').\n", dev->name);
 
     if (!pcmcia_dev_present(link))
 	return -ENODEV;
@@ -1167,7 +1134,7 @@
     struct pcmcia_device *link = lp->p_dev;
     unsigned int ioaddr = dev->base_addr;
 
-    DEBUG(4, "fjn_close('%s').\n", dev->name);
+    pr_debug("fjn_close('%s').\n", dev->name);
 
     lp->open_time = 0;
     netif_stop_queue(dev);
@@ -1219,8 +1186,8 @@
     if (dev->flags & IFF_PROMISC) {
 	memset(mc_filter, 0xff, sizeof(mc_filter));
 	outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
-    } else if (dev->mc_count > MC_FILTERBREAK
-	       ||  (dev->flags & IFF_ALLMULTI)) {
+    } else if (dev->mc_count > MC_FILTERBREAK ||
+	       (dev->flags & IFF_ALLMULTI)) {
 	/* Too many to filter perfectly -- accept all multicasts. */
 	memset(mc_filter, 0xff, sizeof(mc_filter));
 	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 06618af..37f4a6f 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -69,17 +69,6 @@
 #define PCMCIA
 #include "../tokenring/ibmtr.c"
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"ibmtr_cs.c 1.10   1996/01/06 05:19:00 (Steve Kipisz)\n"
-"           2.2.7  1999/05/03 12:00:00 (Mike Phillips)\n"
-"           2.4.2  2001/30/28 Midnight (Burt Silverman)\n";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -130,6 +119,12 @@
 	.get_drvinfo		= netdev_get_drvinfo,
 };
 
+static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) {
+	ibmtr_dev_t *info = dev_id;
+	struct net_device *dev = info->dev;
+	return tok_interrupt(irq, dev);
+};
+
 /*======================================================================
 
     ibmtr_attach() creates an "instance" of the driver, allocating
@@ -143,7 +138,7 @@
     ibmtr_dev_t *info;
     struct net_device *dev;
 
-    DEBUG(0, "ibmtr_attach()\n");
+    dev_dbg(&link->dev, "ibmtr_attach()\n");
 
     /* Create new token-ring device */
     info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -161,14 +156,13 @@
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts1 = 4;
     link->io.IOAddrLines = 16;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->irq.Handler = &tok_interrupt;
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.Handler = ibmtr_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
-    link->irq.Instance = info->dev = dev;
+    info->dev = dev;
 
     SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
 
@@ -190,7 +184,7 @@
     struct net_device *dev = info->dev;
      struct tok_info *ti = netdev_priv(dev);
 
-    DEBUG(0, "ibmtr_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "ibmtr_detach\n");
     
     /* 
      * When the card removal interrupt hits tok_interrupt(), 
@@ -217,9 +211,6 @@
 
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int __devinit ibmtr_config(struct pcmcia_device *link)
 {
     ibmtr_dev_t *info = link->priv;
@@ -227,9 +218,9 @@
     struct tok_info *ti = netdev_priv(dev);
     win_req_t req;
     memreq_t mem;
-    int i, last_ret, last_fn;
+    int i, ret;
 
-    DEBUG(0, "ibmtr_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "ibmtr_config\n");
 
     link->conf.ConfigIndex = 0x61;
 
@@ -241,11 +232,15 @@
     if (i != 0) {
 	/* Couldn't get 0xA20-0xA23.  Try ALTERNATE at 0xA24-0xA27. */
 	link->io.BasePort1 = 0xA24;
-	CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
+	ret = pcmcia_request_io(link, &link->io);
+	if (ret)
+		goto failed;
     }
     dev->base_addr = link->io.BasePort1;
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
     dev->irq = link->irq.AssignedIRQ;
     ti->irq = link->irq.AssignedIRQ;
     ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq);
@@ -256,11 +251,15 @@
     req.Base = 0; 
     req.Size = 0x2000;
     req.AccessSpeed = 250;
-    CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+    ret = pcmcia_request_window(link, &req, &link->win);
+    if (ret)
+	    goto failed;
 
     mem.CardOffset = mmiobase;
     mem.Page = 0;
-    CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    if (ret)
+	    goto failed;
     ti->mmio = ioremap(req.Base, req.Size);
 
     /* Allocate the SRAM memory window */
@@ -269,17 +268,23 @@
     req.Base = 0;
     req.Size = sramsize * 1024;
     req.AccessSpeed = 250;
-    CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &info->sram_win_handle));
+    ret = pcmcia_request_window(link, &req, &info->sram_win_handle);
+    if (ret)
+	    goto failed;
 
     mem.CardOffset = srambase;
     mem.Page = 0;
-    CS_CHECK(MapMemPage, pcmcia_map_mem_page(info->sram_win_handle, &mem));
+    ret = pcmcia_map_mem_page(link, info->sram_win_handle, &mem);
+    if (ret)
+	    goto failed;
 
     ti->sram_base = mem.CardOffset >> 12;
     ti->sram_virt = ioremap(req.Base, req.Size);
     ti->sram_phys = req.Base;
 
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     /*  Set up the Token-Ring Controller Configuration Register and
         turn on the card.  Check the "Local Area Network Credit Card
@@ -287,7 +292,7 @@
     ibmtr_hw_setup(dev, mmiobase);
 
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     i = ibmtr_probe_card(dev);
     if (i != 0) {
@@ -305,8 +310,6 @@
 	   dev->dev_addr);
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     ibmtr_release(link);
     return -ENODEV;
@@ -325,12 +328,12 @@
 	ibmtr_dev_t *info = link->priv;
 	struct net_device *dev = info->dev;
 
-	DEBUG(0, "ibmtr_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "ibmtr_release\n");
 
 	if (link->win) {
 		struct tok_info *ti = netdev_priv(dev);
 		iounmap(ti->mmio);
-		pcmcia_release_window(info->sram_win_handle);
+		pcmcia_release_window(link, info->sram_win_handle);
 	}
 	pcmcia_disable_device(link);
 }
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 5ed6339..8a5ae3b 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -381,13 +381,6 @@
 Private Global Variables
 ---------------------------------------------------------------------------- */
 
-#ifdef PCMCIA_DEBUG
-static char rcsid[] =
-"nmclan_cs.c,v 0.16 1995/07/01 06:42:17 rpao Exp rpao";
-static char *version =
-DRV_NAME " " DRV_VERSION " (Roger C. Pao)";
-#endif
-
 static const char *if_names[]={
     "Auto", "10baseT", "BNC",
 };
@@ -406,12 +399,6 @@
 /* 0=auto, 1=10baseT, 2 = 10base2, default=auto */
 INT_MODULE_PARM(if_port, 0);
 
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
 
 /* ----------------------------------------------------------------------------
 Function Prototypes
@@ -462,8 +449,7 @@
     mace_private *lp;
     struct net_device *dev;
 
-    DEBUG(0, "nmclan_attach()\n");
-    DEBUG(1, "%s\n", rcsid);
+    dev_dbg(&link->dev, "nmclan_attach()\n");
 
     /* Create new ethernet device */
     dev = alloc_etherdev(sizeof(mace_private));
@@ -477,10 +463,8 @@
     link->io.NumPorts1 = 32;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 5;
-    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->irq.Handler = &mace_interrupt;
-    link->irq.Instance = dev;
+    link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+    link->irq.Handler = mace_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
@@ -507,7 +491,7 @@
 {
     struct net_device *dev = link->priv;
 
-    DEBUG(0, "nmclan_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "nmclan_detach\n");
 
     if (link->dev_node)
 	unregister_netdev(dev);
@@ -654,37 +638,40 @@
 	ethernet device available to the system.
 ---------------------------------------------------------------------------- */
 
-#define CS_CHECK(fn, ret) \
-  do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int nmclan_config(struct pcmcia_device *link)
 {
   struct net_device *dev = link->priv;
   mace_private *lp = netdev_priv(dev);
-  tuple_t tuple;
-  u_char buf[64];
-  int i, last_ret, last_fn;
+  u8 *buf;
+  size_t len;
+  int i, ret;
   unsigned int ioaddr;
 
-  DEBUG(0, "nmclan_config(0x%p)\n", link);
+  dev_dbg(&link->dev, "nmclan_config\n");
 
-  CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
-  CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-  CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+  ret = pcmcia_request_io(link, &link->io);
+  if (ret)
+	  goto failed;
+  ret = pcmcia_request_irq(link, &link->irq);
+  if (ret)
+	  goto failed;
+  ret = pcmcia_request_configuration(link, &link->conf);
+  if (ret)
+	  goto failed;
+
   dev->irq = link->irq.AssignedIRQ;
   dev->base_addr = link->io.BasePort1;
 
   ioaddr = dev->base_addr;
 
   /* Read the ethernet address from the CIS. */
-  tuple.DesiredTuple = 0x80 /* CISTPL_CFTABLE_ENTRY_MISC */;
-  tuple.TupleData = buf;
-  tuple.TupleDataMax = 64;
-  tuple.TupleOffset = 0;
-  tuple.Attributes = 0;
-  CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
-  CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
-  memcpy(dev->dev_addr, tuple.TupleData, ETHER_ADDR_LEN);
+  len = pcmcia_get_tuple(link, 0x80, &buf);
+  if (!buf || len < ETHER_ADDR_LEN) {
+	  kfree(buf);
+	  goto failed;
+  }
+  memcpy(dev->dev_addr, buf, ETHER_ADDR_LEN);
+  kfree(buf);
 
   /* Verify configuration by reading the MACE ID. */
   {
@@ -693,7 +680,7 @@
     sig[0] = mace_read(lp, ioaddr, MACE_CHIPIDL);
     sig[1] = mace_read(lp, ioaddr, MACE_CHIPIDH);
     if ((sig[0] == 0x40) && ((sig[1] & 0x0F) == 0x09)) {
-      DEBUG(0, "nmclan_cs configured: mace id=%x %x\n",
+      dev_dbg(&link->dev, "nmclan_cs configured: mace id=%x %x\n",
 	    sig[0], sig[1]);
     } else {
       printk(KERN_NOTICE "nmclan_cs: mace id not found: %x %x should"
@@ -712,7 +699,7 @@
     printk(KERN_NOTICE "nmclan_cs: invalid if_port requested\n");
 
   link->dev_node = &lp->node;
-  SET_NETDEV_DEV(dev, &handle_to_dev(link));
+  SET_NETDEV_DEV(dev, &link->dev);
 
   i = register_netdev(dev);
   if (i != 0) {
@@ -729,8 +716,6 @@
 	 dev->dev_addr);
   return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	nmclan_release(link);
 	return -ENODEV;
@@ -744,7 +729,7 @@
 ---------------------------------------------------------------------------- */
 static void nmclan_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "nmclan_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "nmclan_release\n");
 	pcmcia_disable_device(link);
 }
 
@@ -795,7 +780,7 @@
   /* Reset Xilinx */
   reg.Action = CS_WRITE;
   reg.Offset = CISREG_COR;
-  DEBUG(1, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
+  dev_dbg(&link->dev, "nmclan_reset: OrigCorValue=0x%lX, resetting...\n",
 	OrigCorValue);
   reg.Value = COR_SOFT_RESET;
   pcmcia_access_configuration_register(link, &reg);
@@ -872,7 +857,7 @@
   mace_private *lp = netdev_priv(dev);
   struct pcmcia_device *link = lp->p_dev;
 
-  DEBUG(2, "%s: shutting down ethercard.\n", dev->name);
+  dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
 
   /* Mask off all interrupts from the MACE chip. */
   outb(0xFF, ioaddr + AM2150_MACE_BASE + MACE_IMR);
@@ -891,24 +876,8 @@
 	sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
 }
 
-#ifdef PCMCIA_DEBUG
-static u32 netdev_get_msglevel(struct net_device *dev)
-{
-	return pc_debug;
-}
-
-static void netdev_set_msglevel(struct net_device *dev, u32 level)
-{
-	pc_debug = level;
-}
-#endif /* PCMCIA_DEBUG */
-
 static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
-#ifdef PCMCIA_DEBUG
-	.get_msglevel		= netdev_get_msglevel,
-	.set_msglevel		= netdev_set_msglevel,
-#endif /* PCMCIA_DEBUG */
 };
 
 /* ----------------------------------------------------------------------------
@@ -946,7 +915,7 @@
 
   netif_stop_queue(dev);
 
-  DEBUG(3, "%s: mace_start_xmit(length = %ld) called.\n",
+  pr_debug("%s: mace_start_xmit(length = %ld) called.\n",
 	dev->name, (long)skb->len);
 
 #if (!TX_INTERRUPTABLE)
@@ -1008,7 +977,7 @@
   int IntrCnt = MACE_MAX_IR_ITERATIONS;
 
   if (dev == NULL) {
-    DEBUG(2, "mace_interrupt(): irq 0x%X for unknown device.\n",
+    pr_debug("mace_interrupt(): irq 0x%X for unknown device.\n",
 	  irq);
     return IRQ_NONE;
   }
@@ -1031,7 +1000,7 @@
   }
 
   if (!netif_device_present(dev)) {
-    DEBUG(2, "%s: interrupt from dead card\n", dev->name);
+    pr_debug("%s: interrupt from dead card\n", dev->name);
     return IRQ_NONE;
   }
 
@@ -1039,7 +1008,7 @@
     /* WARNING: MACE_IR is a READ/CLEAR port! */
     status = inb(ioaddr + AM2150_MACE_BASE + MACE_IR);
 
-    DEBUG(3, "mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
+    pr_debug("mace_interrupt: irq 0x%X status 0x%X.\n", irq, status);
 
     if (status & MACE_IR_RCVINT) {
       mace_rx(dev, MACE_MAX_RX_ITERATIONS);
@@ -1158,7 +1127,7 @@
   ) {
     rx_status = inw(ioaddr + AM2150_RCV);
 
-    DEBUG(3, "%s: in mace_rx(), framecnt 0x%X, rx_status"
+    pr_debug("%s: in mace_rx(), framecnt 0x%X, rx_status"
 	  " 0x%X.\n", dev->name, rx_framecnt, rx_status);
 
     if (rx_status & MACE_RCVFS_RCVSTS) { /* Error, update stats. */
@@ -1185,7 +1154,7 @@
       lp->mace_stats.rfs_rcvcc += inb(ioaddr + AM2150_RCV);
         /* rcv collision count */
 
-      DEBUG(3, "    receiving packet size 0x%X rx_status"
+      pr_debug("    receiving packet size 0x%X rx_status"
 	    " 0x%X.\n", pkt_len, rx_status);
 
       skb = dev_alloc_skb(pkt_len+2);
@@ -1204,7 +1173,7 @@
 	outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
 	continue;
       } else {
-	DEBUG(1, "%s: couldn't allocate a sk_buff of size"
+	pr_debug("%s: couldn't allocate a sk_buff of size"
 	      " %d.\n", dev->name, pkt_len);
 	lp->linux_stats.rx_dropped++;
       }
@@ -1220,28 +1189,28 @@
 ---------------------------------------------------------------------------- */
 static void pr_linux_stats(struct net_device_stats *pstats)
 {
-  DEBUG(2, "pr_linux_stats\n");
-  DEBUG(2, " rx_packets=%-7ld        tx_packets=%ld\n",
+  pr_debug("pr_linux_stats\n");
+  pr_debug(" rx_packets=%-7ld        tx_packets=%ld\n",
 	(long)pstats->rx_packets, (long)pstats->tx_packets);
-  DEBUG(2, " rx_errors=%-7ld         tx_errors=%ld\n",
+  pr_debug(" rx_errors=%-7ld         tx_errors=%ld\n",
 	(long)pstats->rx_errors, (long)pstats->tx_errors);
-  DEBUG(2, " rx_dropped=%-7ld        tx_dropped=%ld\n",
+  pr_debug(" rx_dropped=%-7ld        tx_dropped=%ld\n",
 	(long)pstats->rx_dropped, (long)pstats->tx_dropped);
-  DEBUG(2, " multicast=%-7ld         collisions=%ld\n",
+  pr_debug(" multicast=%-7ld         collisions=%ld\n",
 	(long)pstats->multicast, (long)pstats->collisions);
 
-  DEBUG(2, " rx_length_errors=%-7ld  rx_over_errors=%ld\n",
+  pr_debug(" rx_length_errors=%-7ld  rx_over_errors=%ld\n",
 	(long)pstats->rx_length_errors, (long)pstats->rx_over_errors);
-  DEBUG(2, " rx_crc_errors=%-7ld     rx_frame_errors=%ld\n",
+  pr_debug(" rx_crc_errors=%-7ld     rx_frame_errors=%ld\n",
 	(long)pstats->rx_crc_errors, (long)pstats->rx_frame_errors);
-  DEBUG(2, " rx_fifo_errors=%-7ld    rx_missed_errors=%ld\n",
+  pr_debug(" rx_fifo_errors=%-7ld    rx_missed_errors=%ld\n",
 	(long)pstats->rx_fifo_errors, (long)pstats->rx_missed_errors);
 
-  DEBUG(2, " tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
+  pr_debug(" tx_aborted_errors=%-7ld tx_carrier_errors=%ld\n",
 	(long)pstats->tx_aborted_errors, (long)pstats->tx_carrier_errors);
-  DEBUG(2, " tx_fifo_errors=%-7ld    tx_heartbeat_errors=%ld\n",
+  pr_debug(" tx_fifo_errors=%-7ld    tx_heartbeat_errors=%ld\n",
 	(long)pstats->tx_fifo_errors, (long)pstats->tx_heartbeat_errors);
-  DEBUG(2, " tx_window_errors=%ld\n",
+  pr_debug(" tx_window_errors=%ld\n",
 	(long)pstats->tx_window_errors);
 } /* pr_linux_stats */
 
@@ -1250,48 +1219,48 @@
 ---------------------------------------------------------------------------- */
 static void pr_mace_stats(mace_statistics *pstats)
 {
-  DEBUG(2, "pr_mace_stats\n");
+  pr_debug("pr_mace_stats\n");
 
-  DEBUG(2, " xmtsv=%-7d             uflo=%d\n",
+  pr_debug(" xmtsv=%-7d             uflo=%d\n",
 	pstats->xmtsv, pstats->uflo);
-  DEBUG(2, " lcol=%-7d              more=%d\n",
+  pr_debug(" lcol=%-7d              more=%d\n",
 	pstats->lcol, pstats->more);
-  DEBUG(2, " one=%-7d               defer=%d\n",
+  pr_debug(" one=%-7d               defer=%d\n",
 	pstats->one, pstats->defer);
-  DEBUG(2, " lcar=%-7d              rtry=%d\n",
+  pr_debug(" lcar=%-7d              rtry=%d\n",
 	pstats->lcar, pstats->rtry);
 
   /* MACE_XMTRC */
-  DEBUG(2, " exdef=%-7d             xmtrc=%d\n",
+  pr_debug(" exdef=%-7d             xmtrc=%d\n",
 	pstats->exdef, pstats->xmtrc);
 
   /* RFS1--Receive Status (RCVSTS) */
-  DEBUG(2, " oflo=%-7d              clsn=%d\n",
+  pr_debug(" oflo=%-7d              clsn=%d\n",
 	pstats->oflo, pstats->clsn);
-  DEBUG(2, " fram=%-7d              fcs=%d\n",
+  pr_debug(" fram=%-7d              fcs=%d\n",
 	pstats->fram, pstats->fcs);
 
   /* RFS2--Runt Packet Count (RNTPC) */
   /* RFS3--Receive Collision Count (RCVCC) */
-  DEBUG(2, " rfs_rntpc=%-7d         rfs_rcvcc=%d\n",
+  pr_debug(" rfs_rntpc=%-7d         rfs_rcvcc=%d\n",
 	pstats->rfs_rntpc, pstats->rfs_rcvcc);
 
   /* MACE_IR */
-  DEBUG(2, " jab=%-7d               babl=%d\n",
+  pr_debug(" jab=%-7d               babl=%d\n",
 	pstats->jab, pstats->babl);
-  DEBUG(2, " cerr=%-7d              rcvcco=%d\n",
+  pr_debug(" cerr=%-7d              rcvcco=%d\n",
 	pstats->cerr, pstats->rcvcco);
-  DEBUG(2, " rntpco=%-7d            mpco=%d\n",
+  pr_debug(" rntpco=%-7d            mpco=%d\n",
 	pstats->rntpco, pstats->mpco);
 
   /* MACE_MPC */
-  DEBUG(2, " mpc=%d\n", pstats->mpc);
+  pr_debug(" mpc=%d\n", pstats->mpc);
 
   /* MACE_RNTPC */
-  DEBUG(2, " rntpc=%d\n", pstats->rntpc);
+  pr_debug(" rntpc=%d\n", pstats->rntpc);
 
   /* MACE_RCVCC */
-  DEBUG(2, " rcvcc=%d\n", pstats->rcvcc);
+  pr_debug(" rcvcc=%d\n", pstats->rcvcc);
 
 } /* pr_mace_stats */
 
@@ -1360,7 +1329,7 @@
 
   update_stats(dev->base_addr, dev);
 
-  DEBUG(1, "%s: updating the statistics.\n", dev->name);
+  pr_debug("%s: updating the statistics.\n", dev->name);
   pr_linux_stats(&lp->linux_stats);
   pr_mace_stats(&lp->mace_stats);
 
@@ -1427,7 +1396,7 @@
   ladrf[byte] |= (1 << (hashcode & 7));
 
 #ifdef PCMCIA_DEBUG
-  if (pc_debug > 2)
+  if (0)
     printk(KERN_DEBUG "    adr =%pM\n", adr);
   printk(KERN_DEBUG "    hashcode = %d(decimal), ladrf[0:63] =", hashcode);
   for (i = 0; i < 8; i++)
@@ -1454,12 +1423,12 @@
   unsigned int ioaddr = dev->base_addr;
   int i;
 
-  DEBUG(2, "%s: restoring Rx mode to %d addresses.\n",
+  pr_debug("%s: restoring Rx mode to %d addresses.\n",
 	dev->name, num_addrs);
 
   if (num_addrs > 0) {
 
-    DEBUG(1, "Attempt to restore multicast list detected.\n");
+    pr_debug("Attempt to restore multicast list detected.\n");
 
     mace_write(lp, ioaddr, MACE_IAC, MACE_IAC_ADDRCHG | MACE_IAC_LOGADDR);
     /* Poll ADDRCHG bit */
@@ -1511,11 +1480,11 @@
   struct dev_mc_list *dmi = dev->mc_list;
 
 #ifdef PCMCIA_DEBUG
-  if (pc_debug > 1) {
+  {
     static int old;
     if (dev->mc_count != old) {
       old = dev->mc_count;
-      DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+      pr_debug("%s: setting Rx mode to %d addresses.\n",
 	    dev->name, old);
     }
   }
@@ -1546,7 +1515,7 @@
   unsigned int ioaddr = dev->base_addr;
   mace_private *lp = netdev_priv(dev);
 
-  DEBUG(2, "%s: restoring Rx mode to %d addresses.\n", dev->name,
+  pr_debug("%s: restoring Rx mode to %d addresses.\n", dev->name,
 	lp->multicast_num_addrs);
 
   if (dev->flags & IFF_PROMISC) {
@@ -1567,11 +1536,11 @@
   mace_private *lp = netdev_priv(dev);
 
 #ifdef PCMCIA_DEBUG
-  if (pc_debug > 1) {
+  {
     static int old;
     if (dev->mc_count != old) {
       old = dev->mc_count;
-      DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+      pr_debug("%s: setting Rx mode to %d addresses.\n",
 	    dev->name, old);
     }
   }
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 94c9ad2..2d26b6c 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -71,15 +71,6 @@
 
 static const char *if_names[] = { "auto", "10baseT", "10base2"};
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"pcnet_cs.c 1.153 2003/11/09 18:53:09 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -265,7 +256,7 @@
     pcnet_dev_t *info;
     struct net_device *dev;
 
-    DEBUG(0, "pcnet_attach()\n");
+    dev_dbg(&link->dev, "pcnet_attach()\n");
 
     /* Create new ethernet device */
     dev = __alloc_ei_netdev(sizeof(pcnet_dev_t));
@@ -275,7 +266,6 @@
     link->priv = dev;
 
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -297,7 +287,7 @@
 {
 	struct net_device *dev = link->priv;
 
-	DEBUG(0, "pcnet_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "pcnet_detach\n");
 
 	if (link->dev_node)
 		unregister_netdev(dev);
@@ -326,17 +316,15 @@
     req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
     req.Base = 0; req.Size = 0;
     req.AccessSpeed = 0;
-    i = pcmcia_request_window(&link, &req, &link->win);
-    if (i != 0) {
-	cs_error(link, RequestWindow, i);
+    i = pcmcia_request_window(link, &req, &link->win);
+    if (i != 0)
 	return NULL;
-    }
 
     virt = ioremap(req.Base, req.Size);
     mem.Page = 0;
     for (i = 0; i < NR_INFO; i++) {
 	mem.CardOffset = hw_info[i].offset & ~(req.Size-1);
-	pcmcia_map_mem_page(link->win, &mem);
+	pcmcia_map_mem_page(link, link->win, &mem);
 	base = &virt[hw_info[i].offset & (req.Size-1)];
 	if ((readb(base+0) == hw_info[i].a0) &&
 	    (readb(base+2) == hw_info[i].a1) &&
@@ -348,9 +336,7 @@
     }
 
     iounmap(virt);
-    j = pcmcia_release_window(link->win);
-    if (j != 0)
-	cs_error(link, ReleaseWindow, j);
+    j = pcmcia_release_window(link, link->win);
     return (i < NR_INFO) ? hw_info+i : NULL;
 } /* get_hwinfo */
 
@@ -495,9 +481,6 @@
 
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int try_io_port(struct pcmcia_device *link)
 {
     int j, ret;
@@ -567,19 +550,19 @@
 {
     struct net_device *dev = link->priv;
     pcnet_dev_t *info = PRIV(dev);
-    int last_ret, last_fn, start_pg, stop_pg, cm_offset;
+    int ret, start_pg, stop_pg, cm_offset;
     int has_shmem = 0;
     hw_info_t *local_hw_info;
 
-    DEBUG(0, "pcnet_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "pcnet_config\n");
 
-    last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
-    if (last_ret) {
-	cs_error(link, RequestIO, last_ret);
+    ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+    if (ret)
 	goto failed;
-    }
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
 
     if (link->io.NumPorts2 == 8) {
 	link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -589,7 +572,9 @@
 	(link->card_id == PRODID_IBM_HOME_AND_AWAY))
 	link->conf.ConfigIndex |= 0x10;
 
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
     dev->irq = link->irq.AssignedIRQ;
     dev->base_addr = link->io.BasePort1;
     if (info->flags & HAS_MISC_REG) {
@@ -601,8 +586,8 @@
 	dev->if_port = 0;
     }
 
-    if ((link->conf.ConfigBase == 0x03c0)
-	&& (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
+    if ((link->conf.ConfigBase == 0x03c0) &&
+	(link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
 	printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
 	printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
 	goto failed;
@@ -660,7 +645,7 @@
 	mii_phy_probe(dev);
 
     link->dev_node = &info->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_NOTICE "pcnet_cs: register_netdev() failed\n");
@@ -687,8 +672,6 @@
     printk(" hw_addr %pM\n", dev->dev_addr);
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     pcnet_release(link);
     return -ENODEV;
@@ -706,7 +689,7 @@
 {
 	pcnet_dev_t *info = PRIV(link->priv);
 
-	DEBUG(0, "pcnet_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "pcnet_release\n");
 
 	if (info->flags & USE_SHMEM)
 		iounmap(info->base);
@@ -960,7 +943,7 @@
 	phyid = tmp << 16;
 	phyid |= mdio_read(mii_addr, i, MII_PHYID_REG2);
 	phyid &= MII_PHYID_REV_MASK;
-	DEBUG(0, "%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
+	pr_debug("%s: MII at %d is 0x%08x\n", dev->name, i, phyid);
 	if (phyid == AM79C9XX_HOME_PHY) {
 	    info->pna_phy = i;
 	} else if (phyid != AM79C9XX_ETH_PHY) {
@@ -976,7 +959,7 @@
     struct pcmcia_device *link = info->p_dev;
     unsigned int nic_base = dev->base_addr;
 
-    DEBUG(2, "pcnet_open('%s')\n", dev->name);
+    dev_dbg(&link->dev, "pcnet_open('%s')\n", dev->name);
 
     if (!pcmcia_dev_present(link))
 	return -ENODEV;
@@ -1008,7 +991,7 @@
     pcnet_dev_t *info = PRIV(dev);
     struct pcmcia_device *link = info->p_dev;
 
-    DEBUG(2, "pcnet_close('%s')\n", dev->name);
+    dev_dbg(&link->dev, "pcnet_close('%s')\n", dev->name);
 
     ei_close(dev);
     free_irq(dev->irq, dev);
@@ -1251,10 +1234,8 @@
     int xfer_count = count;
     char *buf = skb->data;
 
-#ifdef PCMCIA_DEBUG
     if ((ei_debug > 4) && (count != 4))
-	printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
-#endif
+	pr_debug("%s: [bi=%d]\n", dev->name, count+4);
     if (ei_status.dmaing) {
 	printk(KERN_NOTICE "%s: DMAing conflict in dma_block_input."
 	       "[DMAstat:%1x][irqlock:%1x]\n",
@@ -1495,7 +1476,7 @@
     pcnet_dev_t *info = PRIV(dev);
     win_req_t req;
     memreq_t mem;
-    int i, window_size, offset, last_ret, last_fn;
+    int i, window_size, offset, ret;
 
     window_size = (stop_pg - start_pg) << 8;
     if (window_size > 32 * 1024)
@@ -1509,13 +1490,17 @@
     req.Attributes |= WIN_USE_WAIT;
     req.Base = 0; req.Size = window_size;
     req.AccessSpeed = mem_speed;
-    CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+    ret = pcmcia_request_window(link, &req, &link->win);
+    if (ret)
+	    goto failed;
 
     mem.CardOffset = (start_pg << 8) + cm_offset;
     offset = mem.CardOffset % window_size;
     mem.CardOffset -= offset;
     mem.Page = 0;
-    CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    if (ret)
+	    goto failed;
 
     /* Try scribbling on the buffer */
     info->base = ioremap(req.Base, window_size);
@@ -1527,8 +1512,8 @@
     pcnet_reset_8390(dev);
     if (i != (TX_PAGES<<8)) {
 	iounmap(info->base);
-	pcmcia_release_window(link->win);
-	info->base = NULL; link->win = NULL;
+	pcmcia_release_window(link, link->win);
+	info->base = NULL; link->win = 0;
 	goto failed;
     }
 
@@ -1549,8 +1534,6 @@
     info->flags |= USE_SHMEM;
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     return 1;
 }
@@ -1768,6 +1751,13 @@
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/LA-PCM.cis");
+MODULE_FIRMWARE("PE520.cis");
+MODULE_FIRMWARE("cis/NE2K.cis");
+MODULE_FIRMWARE("cis/PE-200.cis");
+MODULE_FIRMWARE("cis/tamarack.cis");
 
 static struct pcmcia_driver pcnet_driver = {
 	.drv		= {
@@ -1788,7 +1778,6 @@
 
 static void __exit exit_pcnet_cs(void)
 {
-    DEBUG(0, "pcnet_cs: unloading\n");
     pcmcia_unregister_driver(&pcnet_driver);
 }
 
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 7bde2cd..cc4853bc 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -79,14 +79,6 @@
 */
 INT_MODULE_PARM(if_port, 0);
 
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-static const char *version =
-"smc91c92_cs.c 1.123 2006/11/09 Donald Becker, becker@scyld.com.\n";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
 
 #define DRV_NAME	"smc91c92_cs"
 #define DRV_VERSION	"1.123"
@@ -126,12 +118,6 @@
     int				rx_ovrn;
 };
 
-struct smc_cfg_mem {
-    tuple_t tuple;
-    cisparse_t parse;
-    u_char buf[255];
-};
-
 /* Special definitions for Megahertz multifunction cards */
 #define MEGAHERTZ_ISR		0x0380
 
@@ -329,7 +315,7 @@
     struct smc_private *smc;
     struct net_device *dev;
 
-    DEBUG(0, "smc91c92_attach()\n");
+    dev_dbg(&link->dev, "smc91c92_attach()\n");
 
     /* Create new ethernet device */
     dev = alloc_etherdev(sizeof(struct smc_private));
@@ -343,10 +329,8 @@
     link->io.NumPorts1 = 16;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 4;
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
     link->irq.Handler = &smc_interrupt;
-    link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -377,7 +361,7 @@
 {
     struct net_device *dev = link->priv;
 
-    DEBUG(0, "smc91c92_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "smc91c92_detach\n");
 
     if (link->dev_node)
 	unregister_netdev(dev);
@@ -408,34 +392,7 @@
     return 0;
 }
 
-/*====================================================================*/
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
-		cisparse_t *parse)
-{
-	int i;
-
-	i = pcmcia_get_first_tuple(handle, tuple);
-	if (i != 0)
-		return i;
-	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != 0)
-		return i;
-	return pcmcia_parse_tuple(tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
-		cisparse_t *parse)
-{
-	int i;
-
-	if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
-			(i = pcmcia_get_tuple_data(handle, tuple)) != 0)
-		return i;
-	return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*======================================================================
+/*====================================================================
 
     Configuration stuff for Megahertz cards
 
@@ -490,19 +447,14 @@
 {
     struct net_device *dev = link->priv;
     struct smc_private *smc = netdev_priv(dev);
-    struct smc_cfg_mem *cfg_mem;
     win_req_t req;
     memreq_t mem;
     int i;
 
-    cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
-    if (!cfg_mem)
-	    return -ENOMEM;
-
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
     link->irq.Attributes =
-	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
     link->io.IOAddrLines = 16;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
@@ -510,91 +462,80 @@
     /* The Megahertz combo cards have modem-like CIS entries, so
        we have to explicitly try a bunch of port combinations. */
     if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
-	goto free_cfg_mem;
+	    return -ENODEV;
+
     dev->base_addr = link->io.BasePort1;
 
     /* Allocate a memory window, for accessing the ISR */
     req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
     req.Base = req.Size = 0;
     req.AccessSpeed = 0;
-    i = pcmcia_request_window(&link, &req, &link->win);
+    i = pcmcia_request_window(link, &req, &link->win);
     if (i != 0)
-	goto free_cfg_mem;
+	    return -ENODEV;
+
     smc->base = ioremap(req.Base, req.Size);
     mem.CardOffset = mem.Page = 0;
     if (smc->manfid == MANFID_MOTOROLA)
 	mem.CardOffset = link->conf.ConfigBase;
-    i = pcmcia_map_mem_page(link->win, &mem);
+    i = pcmcia_map_mem_page(link, link->win, &mem);
 
-    if ((i == 0)
-	&& (smc->manfid == MANFID_MEGAHERTZ)
-	&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
-	mhz_3288_power(link);
+    if ((i == 0) &&
+	(smc->manfid == MANFID_MEGAHERTZ) &&
+	(smc->cardid == PRODID_MEGAHERTZ_EM3288))
+	    mhz_3288_power(link);
 
-free_cfg_mem:
-    kfree(cfg_mem);
-    return -ENODEV;
+    return 0;
 }
 
+static int pcmcia_get_versmac(struct pcmcia_device *p_dev,
+			      tuple_t *tuple,
+			      void *priv)
+{
+	struct net_device *dev = priv;
+	cisparse_t parse;
+
+	if (pcmcia_parse_tuple(tuple, &parse))
+		return -EINVAL;
+
+	if ((parse.version_1.ns > 3) &&
+	    (cvt_ascii_address(dev,
+			       (parse.version_1.str + parse.version_1.ofs[3]))))
+		return 0;
+
+	return -EINVAL;
+};
+
 static int mhz_setup(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
-    struct smc_cfg_mem *cfg_mem;
-    tuple_t *tuple;
-    cisparse_t *parse;
-    u_char *buf, *station_addr;
+    size_t len;
+    u8 *buf;
     int rc;
 
-    cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
-    if (!cfg_mem)
-	return -1;
-
-    tuple = &cfg_mem->tuple;
-    parse = &cfg_mem->parse;
-    buf = cfg_mem->buf;
-
-    tuple->Attributes = tuple->TupleOffset = 0;
-    tuple->TupleData = (cisdata_t *)buf;
-    tuple->TupleDataMax = 255;
-
     /* Read the station address from the CIS.  It is stored as the last
        (fourth) string in the Version 1 Version/ID tuple. */
-    tuple->DesiredTuple = CISTPL_VERS_1;
-    if (first_tuple(link, tuple, parse) != 0) {
-	rc = -1;
-	goto free_cfg_mem;
-    }
+    if ((link->prod_id[3]) &&
+	(cvt_ascii_address(dev, link->prod_id[3]) == 0))
+	    return 0;
+
+    /* Workarounds for broken cards start here. */
     /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
-    if (next_tuple(link, tuple, parse) != 0)
-	first_tuple(link, tuple, parse);
-    if (parse->version_1.ns > 3) {
-	station_addr = parse->version_1.str + parse->version_1.ofs[3];
-	if (cvt_ascii_address(dev, station_addr) == 0) {
-		rc = 0;
-		goto free_cfg_mem;
-	}
-    }
+    if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev))
+	    return 0;
 
     /* Another possibility: for the EM3288, in a special tuple */
-    tuple->DesiredTuple = 0x81;
-    if (pcmcia_get_first_tuple(link, tuple) != 0) {
-	rc = -1;
-	goto free_cfg_mem;
-    }
-    if (pcmcia_get_tuple_data(link, tuple) != 0) {
-	rc = -1;
-	goto free_cfg_mem;
-    }
-    buf[12] = '\0';
-    if (cvt_ascii_address(dev, buf) == 0) {
-	rc = 0;
-	goto free_cfg_mem;
-   }
     rc = -1;
-free_cfg_mem:
-   kfree(cfg_mem);
-   return rc;
-}
+    len = pcmcia_get_tuple(link, 0x81, &buf);
+    if (buf && len >= 13) {
+	    buf[12] = '\0';
+	    if (cvt_ascii_address(dev, buf))
+		    rc = 0;
+    }
+    kfree(buf);
+
+    return rc;
+};
 
 /*======================================================================
 
@@ -684,58 +625,21 @@
     return i;
 }
 
+
 static int smc_setup(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
-    struct smc_cfg_mem *cfg_mem;
-    tuple_t *tuple;
-    cisparse_t *parse;
-    cistpl_lan_node_id_t *node_id;
-    u_char *buf, *station_addr;
-    int i, rc;
-
-    cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
-    if (!cfg_mem)
-	    return -ENOMEM;
-
-    tuple = &cfg_mem->tuple;
-    parse = &cfg_mem->parse;
-    buf = cfg_mem->buf;
-
-    tuple->Attributes = tuple->TupleOffset = 0;
-    tuple->TupleData = (cisdata_t *)buf;
-    tuple->TupleDataMax = 255;
 
     /* Check for a LAN function extension tuple */
-    tuple->DesiredTuple = CISTPL_FUNCE;
-    i = first_tuple(link, tuple, parse);
-    while (i == 0) {
-	if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
-	    break;
-	i = next_tuple(link, tuple, parse);
-    }
-    if (i == 0) {
-	node_id = (cistpl_lan_node_id_t *)parse->funce.data;
-	if (node_id->nb == 6) {
-	    for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = node_id->id[i];
-	    rc = 0;
-	    goto free_cfg_mem;
-	}
-    }
+    if (!pcmcia_get_mac_from_cis(link, dev))
+	    return 0;
+
     /* Try the third string in the Version 1 Version/ID tuple. */
     if (link->prod_id[2]) {
-	station_addr = link->prod_id[2];
-	if (cvt_ascii_address(dev, station_addr) == 0) {
-		rc = 0;
-		goto free_cfg_mem;
-	}
+	    if (cvt_ascii_address(dev, link->prod_id[2]) == 0)
+		    return 0;
     }
-
-    rc = -1;
-free_cfg_mem:
-    kfree(cfg_mem);
-    return rc;
+    return -1;
 }
 
 /*====================================================================*/
@@ -749,7 +653,7 @@
     link->conf.Attributes |= CONF_ENABLE_SPKR;
     link->conf.Status = CCSR_AUDIO_ENA;
     link->irq.Attributes =
-	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
+	IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
     link->io.NumPorts1 = 64;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->io.NumPorts2 = 8;
@@ -794,41 +698,31 @@
 	return err;
 }
 
+static int pcmcia_osi_mac(struct pcmcia_device *p_dev,
+			  tuple_t *tuple,
+			  void *priv)
+{
+	struct net_device *dev = priv;
+	int i;
+
+	if (tuple->TupleDataLen < 8)
+		return -EINVAL;
+	if (tuple->TupleData[0] != 0x04)
+		return -EINVAL;
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = tuple->TupleData[i+2];
+	return 0;
+};
+
+
 static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
 {
     struct net_device *dev = link->priv;
-    struct smc_cfg_mem *cfg_mem;
-    tuple_t *tuple;
-    u_char *buf;
-    int i, rc;
-
-    cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
-    if (!cfg_mem)
-        return -1;
-
-    tuple = &cfg_mem->tuple;
-    buf = cfg_mem->buf;
-
-    tuple->Attributes = TUPLE_RETURN_COMMON;
-    tuple->TupleData = (cisdata_t *)buf;
-    tuple->TupleDataMax = 255;
-    tuple->TupleOffset = 0;
+    int rc;
 
     /* Read the station address from tuple 0x90, subtuple 0x04 */
-    tuple->DesiredTuple = 0x90;
-    i = pcmcia_get_first_tuple(link, tuple);
-    while (i == 0) {
-	i = pcmcia_get_tuple_data(link, tuple);
-	if ((i != 0) || (buf[0] == 0x04))
-	    break;
-	i = pcmcia_get_next_tuple(link, tuple);
-    }
-    if (i != 0) {
-	rc = -1;
-	goto free_cfg_mem;
-    }
-    for (i = 0; i < 6; i++)
-	dev->dev_addr[i] = buf[i+2];
+    if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev))
+	    return -1;
 
     if (((manfid == MANFID_OSITECH) &&
 	 (cardid == PRODID_OSITECH_SEVEN)) ||
@@ -836,20 +730,17 @@
 	 (cardid == PRODID_PSION_NET100))) {
 	rc = osi_load_firmware(link);
 	if (rc)
-		goto free_cfg_mem;
+		return rc;
     } else if (manfid == MANFID_OSITECH) {
 	/* Make sure both functions are powered up */
 	set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR);
 	/* Now, turn on the interrupt for both card functions */
 	set_bits(0x300, link->io.BasePort1 + OSITECH_RESET_ISR);
-	DEBUG(2, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
+	dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n",
 	      inw(link->io.BasePort1 + OSITECH_AUI_PWR),
 	      inw(link->io.BasePort1 + OSITECH_RESET_ISR));
     }
-    rc = 0;
-free_cfg_mem:
-   kfree(cfg_mem);
-   return rc;
+    return 0;
 }
 
 static int smc91c92_suspend(struct pcmcia_device *link)
@@ -959,12 +850,6 @@
 
 ======================================================================*/
 
-#define CS_EXIT_TEST(ret, svc, label)	\
-if (ret != 0) {				\
-	cs_error(link, svc, ret);	\
-	goto label; 			\
-}
-
 static int smc91c92_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
@@ -974,7 +859,7 @@
     unsigned int ioaddr;
     u_long mir;
 
-    DEBUG(0, "smc91c92_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "smc91c92_config\n");
 
     smc->manfid = link->manf_id;
     smc->cardid = link->card_id;
@@ -990,12 +875,15 @@
     } else {
 	i = smc_config(link);
     }
-    CS_EXIT_TEST(i, RequestIO, config_failed);
+    if (i)
+	    goto config_failed;
 
     i = pcmcia_request_irq(link, &link->irq);
-    CS_EXIT_TEST(i, RequestIRQ, config_failed);
+    if (i)
+	    goto config_failed;
     i = pcmcia_request_configuration(link, &link->conf);
-    CS_EXIT_TEST(i, RequestConfiguration, config_failed);
+    if (i)
+	    goto config_failed;
 
     if (smc->manfid == MANFID_MOTOROLA)
 	mot_config(link);
@@ -1074,7 +962,7 @@
     }
 
     link->dev_node = &smc->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if (register_netdev(dev) != 0) {
 	printk(KERN_ERR "smc91c92_cs: register_netdev() failed\n");
@@ -1100,7 +988,7 @@
 
     if (smc->cfg & CFG_MII_SELECT) {
 	if (smc->mii_if.phy_id != -1) {
-	    DEBUG(0, "  MII transceiver at index %d, status %x.\n",
+	    dev_dbg(&link->dev, "  MII transceiver at index %d, status %x.\n",
 		  smc->mii_if.phy_id, j);
 	} else {
     	    printk(KERN_NOTICE "  No MII transceivers found!\n");
@@ -1110,7 +998,7 @@
 
 config_undo:
     unregister_netdev(dev);
-config_failed:			/* CS_EXIT_TEST() calls jump to here... */
+config_failed:
     smc91c92_release(link);
     return -ENODEV;
 } /* smc91c92_config */
@@ -1125,7 +1013,7 @@
 
 static void smc91c92_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "smc91c92_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "smc91c92_release\n");
 	if (link->win) {
 		struct net_device *dev = link->priv;
 		struct smc_private *smc = netdev_priv(dev);
@@ -1222,10 +1110,10 @@
     struct smc_private *smc = netdev_priv(dev);
     struct pcmcia_device *link = smc->p_dev;
 
-#ifdef PCMCIA_DEBUG
-    DEBUG(0, "%s: smc_open(%p), ID/Window %4.4x.\n",
+    dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n",
 	  dev->name, dev, inw(dev->base_addr + BANK_SELECT));
-    if (pc_debug > 1) smc_dump(dev);
+#ifdef PCMCIA_DEBUG
+    smc_dump(dev);
 #endif
 
     /* Check that the PCMCIA card is still here. */
@@ -1260,7 +1148,7 @@
     struct pcmcia_device *link = smc->p_dev;
     unsigned int ioaddr = dev->base_addr;
 
-    DEBUG(0, "%s: smc_close(), status %4.4x.\n",
+    dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n",
 	  dev->name, inw(ioaddr + BANK_SELECT));
 
     netif_stop_queue(dev);
@@ -1327,7 +1215,7 @@
 	u_char *buf = skb->data;
 	u_int length = skb->len; /* The chip will pad to ethernet min. */
 
-	DEBUG(2, "%s: Trying to xmit packet of length %d.\n",
+	pr_debug("%s: Trying to xmit packet of length %d.\n",
 	      dev->name, length);
 	
 	/* send the packet length: +6 for status word, length, and ctl */
@@ -1382,7 +1270,7 @@
 
     netif_stop_queue(dev);
 
-    DEBUG(2, "%s: smc_start_xmit(length = %d) called,"
+    pr_debug("%s: smc_start_xmit(length = %d) called,"
 	  " status %4.4x.\n", dev->name, skb->len, inw(ioaddr + 2));
 
     if (smc->saved_skb) {
@@ -1429,7 +1317,7 @@
     }
 
     /* Otherwise defer until the Tx-space-allocated interrupt. */
-    DEBUG(2, "%s: memory allocation deferred.\n", dev->name);
+    pr_debug("%s: memory allocation deferred.\n", dev->name);
     outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT);
     spin_unlock_irqrestore(&smc->lock, flags);
 
@@ -1494,7 +1382,7 @@
 
     SMC_SELECT_BANK(0);
     ephs = inw(ioaddr + EPH);
-    DEBUG(2, "%s: Ethernet protocol handler interrupt, status"
+    pr_debug("%s: Ethernet protocol handler interrupt, status"
 	  " %4.4x.\n", dev->name, ephs);
     /* Could be a counter roll-over warning: update stats. */
     card_stats = inw(ioaddr + COUNTER);
@@ -1534,7 +1422,7 @@
 
     ioaddr = dev->base_addr;
 
-    DEBUG(3, "%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
+    pr_debug("%s: SMC91c92 interrupt %d at %#x.\n", dev->name,
 	  irq, ioaddr);
 
     spin_lock(&smc->lock);
@@ -1543,7 +1431,7 @@
     if ((saved_bank & 0xff00) != 0x3300) {
 	/* The device does not exist -- the card could be off-line, or
 	   maybe it has been ejected. */
-	DEBUG(1, "%s: SMC91c92 interrupt %d for non-existent"
+	pr_debug("%s: SMC91c92 interrupt %d for non-existent"
 	      "/ejected device.\n", dev->name, irq);
 	handled = 0;
 	goto irq_done;
@@ -1557,7 +1445,7 @@
 
     do { /* read the status flag, and mask it */
 	status = inw(ioaddr + INTERRUPT) & 0xff;
-	DEBUG(3, "%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
+	pr_debug("%s: Status is %#2.2x (mask %#2.2x).\n", dev->name,
 	      status, mask);
 	if ((status & mask) == 0) {
 	    if (bogus_cnt == INTR_WORK)
@@ -1602,7 +1490,7 @@
 	    smc_eph_irq(dev);
     } while (--bogus_cnt);
 
-    DEBUG(3, "  Restoring saved registers mask %2.2x bank %4.4x"
+    pr_debug("  Restoring saved registers mask %2.2x bank %4.4x"
 	  " pointer %4.4x.\n", mask, saved_bank, saved_pointer);
 
     /* restore state register */
@@ -1610,7 +1498,7 @@
     outw(saved_pointer, ioaddr + POINTER);
     SMC_SELECT_BANK(saved_bank);
 
-    DEBUG(3, "%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
+    pr_debug("%s: Exiting interrupt IRQ%d.\n", dev->name, irq);
 
 irq_done:
 
@@ -1661,7 +1549,7 @@
     rx_status = inw(ioaddr + DATA_1);
     packet_length = inw(ioaddr + DATA_1) & 0x07ff;
 
-    DEBUG(2, "%s: Receive status %4.4x length %d.\n",
+    pr_debug("%s: Receive status %4.4x length %d.\n",
 	  dev->name, rx_status, packet_length);
 
     if (!(rx_status & RS_ERRORS)) {		
@@ -1672,7 +1560,7 @@
 	skb = dev_alloc_skb(packet_length+2);
 	
 	if (skb == NULL) {
-	    DEBUG(1, "%s: Low memory, packet dropped.\n", dev->name);
+	    pr_debug("%s: Low memory, packet dropped.\n", dev->name);
 	    dev->stats.rx_dropped++;
 	    outw(MC_RELEASE, ioaddr + MMU_CMD);
 	    return;
@@ -1832,7 +1720,7 @@
     struct smc_private *smc = netdev_priv(dev);
     int i;
 
-    DEBUG(0, "%s: smc91c92 reset called.\n", dev->name);
+    pr_debug("%s: smc91c92 reset called.\n", dev->name);
 
     /* The first interaction must be a write to bring the chip out
        of sleep mode. */
@@ -2149,18 +2037,6 @@
 	return ret;
 }
 
-#ifdef PCMCIA_DEBUG
-static u32 smc_get_msglevel(struct net_device *dev)
-{
-	return pc_debug;
-}
-
-static void smc_set_msglevel(struct net_device *dev, u32 val)
-{
-	pc_debug = val;
-}
-#endif
-
 static int smc_nway_reset(struct net_device *dev)
 {
 	struct smc_private *smc = netdev_priv(dev);
@@ -2184,10 +2060,6 @@
 	.get_settings = smc_get_settings,
 	.set_settings = smc_set_settings,
 	.get_link = smc_get_link,
-#ifdef PCMCIA_DEBUG
-	.get_msglevel = smc_get_msglevel,
-	.set_msglevel = smc_set_msglevel,
-#endif
 	.nway_reset = smc_nway_reset,
 };
 
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index cf84231..a2eda28 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -211,20 +211,6 @@
 
 static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
 
-/****************
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
- * you do not define PCMCIA_DEBUG at all, all the debug code will be
- * left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
- * be present but disabled -- but it can then be enabled for specific
- * modules at load time with a 'pc_debug=#' option to insmod.
- */
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KDBG_XIRC args)
-#else
-#define DEBUG(n, args...)
-#endif
 
 #define KDBG_XIRC KERN_DEBUG   "xirc2ps_cs: "
 #define KERR_XIRC KERN_ERR     "xirc2ps_cs: "
@@ -359,7 +345,7 @@
 static void xirc2ps_tx_timeout_task(struct work_struct *work);
 static void set_addresses(struct net_device *dev);
 static void set_multicast_list(struct net_device *dev);
-static int set_card_type(struct pcmcia_device *link, const void *s);
+static int set_card_type(struct pcmcia_device *link);
 static int do_config(struct net_device *dev, struct ifmap *map);
 static int do_open(struct net_device *dev);
 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -371,28 +357,6 @@
 static int do_stop(struct net_device *dev);
 
 /*=============== Helper functions =========================*/
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
-	int err;
-
-	if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
-			(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
-		err = pcmcia_parse_tuple(tuple, parse);
-	return err;
-}
-
-static int
-next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
-	int err;
-
-	if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
-			(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
-		err = pcmcia_parse_tuple(tuple, parse);
-	return err;
-}
-
 #define SelectPage(pgnr)   outb((pgnr), ioaddr + XIRCREG_PR)
 #define GetByte(reg)	   ((unsigned)inb(ioaddr + (reg)))
 #define GetWord(reg)	   ((unsigned)inw(ioaddr + (reg)))
@@ -400,7 +364,7 @@
 #define PutWord(reg,value) outw((value), ioaddr+(reg))
 
 /*====== Functions used for debugging =================================*/
-#if defined(PCMCIA_DEBUG) && 0 /* reading regs may change system status */
+#if 0 /* reading regs may change system status */
 static void
 PrintRegisters(struct net_device *dev)
 {
@@ -421,9 +385,9 @@
 	    printk("\n");
 	}
 	for (page=0x40 ; page <= 0x5f; page++) {
-	    if (page == 0x43 || (page >= 0x46 && page <= 0x4f)
-		|| (page >= 0x51 && page <=0x5e))
-		continue;
+		if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
+		    (page >= 0x51 && page <=0x5e))
+			continue;
 	    printk(KDBG_XIRC "Register page %2x: ", page);
 	    SelectPage(page);
 	    for (i = 8; i < 16; i++)
@@ -432,7 +396,7 @@
 	}
     }
 }
-#endif /* PCMCIA_DEBUG */
+#endif /* 0 */
 
 /*============== MII Management functions ===============*/
 
@@ -576,7 +540,7 @@
     struct net_device *dev;
     local_info_t *local;
 
-    DEBUG(0, "attach()\n");
+    dev_dbg(&link->dev, "attach()\n");
 
     /* Allocate the device structure */
     dev = alloc_etherdev(sizeof(local_info_t));
@@ -592,7 +556,6 @@
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->irq.Handler = xirc2ps_interrupt;
-    link->irq.Instance = dev;
 
     /* Fill in card specific entries */
     dev->netdev_ops = &netdev_ops;
@@ -615,7 +578,7 @@
 {
     struct net_device *dev = link->priv;
 
-    DEBUG(0, "detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "detach\n");
 
     if (link->dev_node)
 	unregister_netdev(dev);
@@ -644,17 +607,25 @@
  *
  */
 static int
-set_card_type(struct pcmcia_device *link, const void *s)
+set_card_type(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     local_info_t *local = netdev_priv(dev);
-  #ifdef PCMCIA_DEBUG
-    unsigned cisrev = ((const unsigned char *)s)[2];
-  #endif
-    unsigned mediaid= ((const unsigned char *)s)[3];
-    unsigned prodid = ((const unsigned char *)s)[4];
+    u8 *buf;
+    unsigned int cisrev, mediaid, prodid;
+    size_t len;
 
-    DEBUG(0, "cisrev=%02x mediaid=%02x prodid=%02x\n",
+    len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
+    if (len < 5) {
+	    dev_err(&link->dev, "invalid CIS -- sorry\n");
+	    return 0;
+    }
+
+    cisrev = buf[2];
+    mediaid = buf[3];
+    prodid = buf[4];
+
+    dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
 	  cisrev, mediaid, prodid);
 
     local->mohawk = 0;
@@ -761,6 +732,26 @@
 
 }
 
+
+static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
+			     tuple_t *tuple,
+			     void *priv)
+{
+	struct net_device *dev = priv;
+	int i;
+
+	if (tuple->TupleDataLen != 13)
+		return -EINVAL;
+	if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
+		(tuple->TupleData[2] != 6))
+		return -EINVAL;
+	/* another try	(James Lehmer's CE2 version 4.1)*/
+	for (i = 2; i < 6; i++)
+		dev->dev_addr[i] = tuple->TupleData[i+2];
+	return 0;
+};
+
+
 /****************
  * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
  * is received, to configure the PCMCIA socket, and to make the
@@ -772,33 +763,21 @@
     struct net_device *dev = link->priv;
     local_info_t *local = netdev_priv(dev);
     unsigned int ioaddr;
-    tuple_t tuple;
-    cisparse_t parse;
-    int err, i;
-    u_char buf[64];
-    cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
+    int err;
+    u8 *buf;
+    size_t len;
 
     local->dingo_ccr = NULL;
 
-    DEBUG(0, "config(0x%p)\n", link);
-
-    /*
-     * This reads the card's CONFIG tuple to find its configuration
-     * registers.
-     */
-    tuple.Attributes = 0;
-    tuple.TupleData = buf;
-    tuple.TupleDataMax = 64;
-    tuple.TupleOffset = 0;
+    dev_dbg(&link->dev, "config\n");
 
     /* Is this a valid	card */
-    tuple.DesiredTuple = CISTPL_MANFID;
-    if ((err=first_tuple(link, &tuple, &parse))) {
+    if (link->has_manf_id == 0) {
 	printk(KNOT_XIRC "manfid not found in CIS\n");
 	goto failure;
     }
 
-    switch(parse.manfid.manf) {
+    switch (link->manf_id) {
       case MANFID_XIRCOM:
 	local->manf_str = "Xircom";
 	break;
@@ -817,65 +796,44 @@
 	break;
       default:
 	printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
-	       (unsigned)parse.manfid.manf);
+	       (unsigned)link->manf_id);
 	goto failure;
     }
-    DEBUG(0, "found %s card\n", local->manf_str);
+    dev_dbg(&link->dev, "found %s card\n", local->manf_str);
 
-    if (!set_card_type(link, buf)) {
+    if (!set_card_type(link)) {
 	printk(KNOT_XIRC "this card is not supported\n");
 	goto failure;
     }
 
     /* get the ethernet address from the CIS */
-    tuple.DesiredTuple = CISTPL_FUNCE;
-    for (err = first_tuple(link, &tuple, &parse); !err;
-			     err = next_tuple(link, &tuple, &parse)) {
-	/* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries:
-	 * the first one with a length of zero the second correct -
-	 * so I skip all entries with length 0 */
-	if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID
-	    && ((cistpl_lan_node_id_t *)parse.funce.data)->nb)
-	    break;
-    }
-    if (err) { /* not found: try to get the node-id from tuple 0x89 */
-	tuple.DesiredTuple = 0x89;  /* data layout looks like tuple 0x22 */
-	if ((err = pcmcia_get_first_tuple(link, &tuple)) == 0 &&
-		(err = pcmcia_get_tuple_data(link, &tuple)) == 0) {
-	    if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID)
-		memcpy(&parse, buf, 8);
-	    else
-		err = -1;
-	}
-    }
-    if (err) { /* another try	(James Lehmer's CE2 version 4.1)*/
-	tuple.DesiredTuple = CISTPL_FUNCE;
-	for (err = first_tuple(link, &tuple, &parse); !err;
-				 err = next_tuple(link, &tuple, &parse)) {
-	    if (parse.funce.type == 0x02 && parse.funce.data[0] == 1
-		&& parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) {
-		buf[1] = 4;
-		memcpy(&parse, buf+1, 8);
-		break;
+    err = pcmcia_get_mac_from_cis(link, dev);
+
+    /* not found: try to get the node-id from tuple 0x89 */
+    if (err) {
+	    len = pcmcia_get_tuple(link, 0x89, &buf);
+	    /* data layout looks like tuple 0x22 */
+	    if (buf && len == 8) {
+		    if (*buf == CISTPL_FUNCE_LAN_NODE_ID) {
+			    int i;
+			    for (i = 2; i < 6; i++)
+				    dev->dev_addr[i] = buf[i+2];
+		    } else
+			    err = -1;
 	    }
-	}
+	    kfree(buf);
     }
+
+    if (err)
+	err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
+
     if (err) {
 	printk(KNOT_XIRC "node-id not found in CIS\n");
 	goto failure;
     }
-    node_id = (cistpl_lan_node_id_t *)parse.funce.data;
-    if (node_id->nb != 6) {
-	printk(KNOT_XIRC "malformed node-id in CIS\n");
-	goto failure;
-    }
-    for (i=0; i < 6; i++)
-	dev->dev_addr[i] = node_id->id[i];
 
     link->io.IOAddrLines =10;
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-    link->irq.Attributes = IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     if (local->modem) {
 	int pass;
 
@@ -916,10 +874,8 @@
 		goto port_found;
 	}
 	link->io.BasePort1 = 0; /* let CS decide */
-	if ((err=pcmcia_request_io(link, &link->io))) {
-	    cs_error(link, RequestIO, err);
+	if ((err=pcmcia_request_io(link, &link->io)))
 	    goto config_error;
-	}
     }
   port_found:
     if (err)
@@ -929,19 +885,15 @@
      * Now allocate an interrupt line.	Note that this does not
      * actually assign a handler to the interrupt.
      */
-    if ((err=pcmcia_request_irq(link, &link->irq))) {
-	cs_error(link, RequestIRQ, err);
+    if ((err=pcmcia_request_irq(link, &link->irq)))
 	goto config_error;
-    }
 
     /****************
      * This actually configures the PCMCIA socket -- setting up
      * the I/O windows and the interrupt mapping.
      */
-    if ((err=pcmcia_request_configuration(link, &link->conf))) {
-	cs_error(link, RequestConfiguration, err);
+    if ((err=pcmcia_request_configuration(link, &link->conf)))
 	goto config_error;
-    }
 
     if (local->dingo) {
 	conf_reg_t reg;
@@ -956,17 +908,13 @@
 	reg.Action = CS_WRITE;
 	reg.Offset = CISREG_IOBASE_0;
 	reg.Value = link->io.BasePort2 & 0xff;
-	if ((err = pcmcia_access_configuration_register(link, &reg))) {
-	    cs_error(link, AccessConfigurationRegister, err);
+	if ((err = pcmcia_access_configuration_register(link, &reg)))
 	    goto config_error;
-	}
 	reg.Action = CS_WRITE;
 	reg.Offset = CISREG_IOBASE_1;
 	reg.Value = (link->io.BasePort2 >> 8) & 0xff;
-	if ((err = pcmcia_access_configuration_register(link, &reg))) {
-	    cs_error(link, AccessConfigurationRegister, err);
+	if ((err = pcmcia_access_configuration_register(link, &reg)))
 	    goto config_error;
-	}
 
 	/* There is no config entry for the Ethernet part which
 	 * is at 0x0800. So we allocate a window into the attribute
@@ -975,17 +923,14 @@
 	req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
 	req.Base = req.Size = 0;
 	req.AccessSpeed = 0;
-	if ((err = pcmcia_request_window(&link, &req, &link->win))) {
-	    cs_error(link, RequestWindow, err);
+	if ((err = pcmcia_request_window(link, &req, &link->win)))
 	    goto config_error;
-	}
+
 	local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800;
 	mem.CardOffset = 0x0;
 	mem.Page = 0;
-	if ((err = pcmcia_map_mem_page(link->win, &mem))) {
-	    cs_error(link, MapMemPage, err);
+	if ((err = pcmcia_map_mem_page(link, link->win, &mem)))
 	    goto config_error;
-	}
 
 	/* Setup the CCRs; there are no infos in the CIS about the Ethernet
 	 * part.
@@ -1044,7 +989,7 @@
 	do_reset(dev, 1); /* a kludge to make the cem56 work */
 
     link->dev_node = &local->node;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
+    SET_NETDEV_DEV(dev, &link->dev);
 
     if ((err=register_netdev(dev))) {
 	printk(KNOT_XIRC "register_netdev() failed\n");
@@ -1077,7 +1022,7 @@
 static void
 xirc2ps_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "release(0x%p)\n", link);
+	dev_dbg(&link->dev, "release\n");
 
 	if (link->win) {
 		struct net_device *dev = link->priv;
@@ -1144,7 +1089,7 @@
 	PutByte(XIRCREG_CR, 0);
     }
 
-    DEBUG(6, "%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
+    pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
 
     saved_page = GetByte(XIRCREG_PR);
     /* Read the ISR to see whats the cause for the interrupt.
@@ -1154,7 +1099,7 @@
     bytes_rcvd = 0;
   loop_entry:
     if (int_status == 0xff) { /* card may be ejected */
-	DEBUG(3, "%s: interrupt %d for dead card\n", dev->name, irq);
+	pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
 	goto leave;
     }
     eth_status = GetByte(XIRCREG_ESR);
@@ -1167,7 +1112,7 @@
     PutByte(XIRCREG40_TXST0, 0);
     PutByte(XIRCREG40_TXST1, 0);
 
-    DEBUG(3, "%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
+    pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
 	  dev->name, int_status, eth_status, rx_status, tx_status);
 
     /***** receive section ******/
@@ -1178,14 +1123,14 @@
 	    /* too many bytes received during this int, drop the rest of the
 	     * packets */
 	    dev->stats.rx_dropped++;
-	    DEBUG(2, "%s: RX drop, too much done\n", dev->name);
+	    pr_debug("%s: RX drop, too much done\n", dev->name);
 	} else if (rsr & PktRxOk) {
 	    struct sk_buff *skb;
 
 	    pktlen = GetWord(XIRCREG0_RBC);
 	    bytes_rcvd += pktlen;
 
-	    DEBUG(5, "rsr=%#02x packet_length=%u\n", rsr, pktlen);
+	    pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
 
 	    skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
 	    if (!skb) {
@@ -1253,19 +1198,19 @@
 		    dev->stats.multicast++;
 	    }
 	} else { /* bad packet */
-	    DEBUG(5, "rsr=%#02x\n", rsr);
+	    pr_debug("rsr=%#02x\n", rsr);
 	}
 	if (rsr & PktTooLong) {
 	    dev->stats.rx_frame_errors++;
-	    DEBUG(3, "%s: Packet too long\n", dev->name);
+	    pr_debug("%s: Packet too long\n", dev->name);
 	}
 	if (rsr & CRCErr) {
 	    dev->stats.rx_crc_errors++;
-	    DEBUG(3, "%s: CRC error\n", dev->name);
+	    pr_debug("%s: CRC error\n", dev->name);
 	}
 	if (rsr & AlignErr) {
 	    dev->stats.rx_fifo_errors++; /* okay ? */
-	    DEBUG(3, "%s: Alignment error\n", dev->name);
+	    pr_debug("%s: Alignment error\n", dev->name);
 	}
 
 	/* clear the received/dropped/error packet */
@@ -1277,7 +1222,7 @@
     if (rx_status & 0x10) { /* Receive overrun */
 	dev->stats.rx_over_errors++;
 	PutByte(XIRCREG_CR, ClearRxOvrun);
-	DEBUG(3, "receive overrun cleared\n");
+	pr_debug("receive overrun cleared\n");
     }
 
     /***** transmit section ******/
@@ -1290,13 +1235,13 @@
 	if (nn < n) /* rollover */
 	    dev->stats.tx_packets += 256 - n;
 	else if (n == nn) { /* happens sometimes - don't know why */
-	    DEBUG(0, "PTR not changed?\n");
+	    pr_debug("PTR not changed?\n");
 	} else
 	    dev->stats.tx_packets += lp->last_ptr_value - n;
 	netif_wake_queue(dev);
     }
     if (tx_status & 0x0002) {	/* Execessive collissions */
-	DEBUG(0, "tx restarted due to execssive collissions\n");
+	pr_debug("tx restarted due to execssive collissions\n");
 	PutByte(XIRCREG_CR, RestartTx);  /* restart transmitter process */
     }
     if (tx_status & 0x0040)
@@ -1315,14 +1260,14 @@
 		maxrx_bytes = 2000;
 	    else if (maxrx_bytes > 22000)
 		maxrx_bytes = 22000;
-	    DEBUG(1, "set maxrx=%u (rcvd=%u ticks=%lu)\n",
+	    pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
 		  maxrx_bytes, bytes_rcvd, duration);
 	} else if (!duration && maxrx_bytes < 22000) {
 	    /* now much faster */
 	    maxrx_bytes += 2000;
 	    if (maxrx_bytes > 22000)
 		maxrx_bytes = 22000;
-	    DEBUG(1, "set maxrx=%u\n", maxrx_bytes);
+	    pr_debug("set maxrx=%u\n", maxrx_bytes);
 	}
     }
 
@@ -1372,7 +1317,7 @@
     unsigned freespace;
     unsigned pktlen = skb->len;
 
-    DEBUG(1, "do_start_xmit(skb=%p, dev=%p) len=%u\n",
+    pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
 	  skb, dev, pktlen);
 
 
@@ -1398,7 +1343,7 @@
     freespace &= 0x7fff;
     /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
     okay = pktlen +2 < freespace;
-    DEBUG(2 + (okay ? 2 : 0), "%s: avail. tx space=%u%s\n",
+    pr_debug("%s: avail. tx space=%u%s\n",
 	  dev->name, freespace, okay ? " (okay)":" (not enough)");
     if (!okay) { /* not enough space */
 	return NETDEV_TX_BUSY;  /* upper layer may decide to requeue this packet */
@@ -1500,7 +1445,7 @@
 {
     local_info_t *local = netdev_priv(dev);
 
-    DEBUG(0, "do_config(%p)\n", dev);
+    pr_debug("do_config(%p)\n", dev);
     if (map->port != 255 && map->port != dev->if_port) {
 	if (map->port > 4)
 	    return -EINVAL;
@@ -1527,7 +1472,7 @@
     local_info_t *lp = netdev_priv(dev);
     struct pcmcia_device *link = lp->p_dev;
 
-    DEBUG(0, "do_open(%p)\n", dev);
+    dev_dbg(&link->dev, "do_open(%p)\n", dev);
 
     /* Check that the PCMCIA card is still here. */
     /* Physical device present signature. */
@@ -1561,7 +1506,7 @@
     unsigned int ioaddr = dev->base_addr;
     struct mii_ioctl_data *data = if_mii(rq);
 
-    DEBUG(1, "%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
+    pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
 	  dev->name, rq->ifr_ifrn.ifrn_name, cmd,
 	  data->phy_id, data->reg_num, data->val_in, data->val_out);
 
@@ -1610,7 +1555,7 @@
     unsigned int ioaddr = dev->base_addr;
     unsigned value;
 
-    DEBUG(0, "%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
+    pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
 
     hardreset(dev);
     PutByte(XIRCREG_CR, SoftReset); /* set */
@@ -1648,8 +1593,8 @@
     }
     msleep(40);			     /* wait 40 msec to let it complete */
 
-  #ifdef PCMCIA_DEBUG
-    if (pc_debug) {
+  #if 0
+    {
 	SelectPage(0);
 	value = GetByte(XIRCREG_ESR);	 /* read the ESR */
 	printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
@@ -1666,7 +1611,7 @@
 	value |= DisableLinkPulse;
     PutByte(XIRCREG1_ECR, value);
   #endif
-    DEBUG(0, "%s: ECR is: %#02x\n", dev->name, value);
+    pr_debug("%s: ECR is: %#02x\n", dev->name, value);
 
     SelectPage(0x42);
     PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
@@ -1844,7 +1789,7 @@
 
     unsigned int ioaddr = dev->base_addr;
 
-    DEBUG(0, "do_powerdown(%p)\n", dev);
+    pr_debug("do_powerdown(%p)\n", dev);
 
     SelectPage(4);
     PutByte(XIRCREG4_GPR1, 0);	     /* clear bit 0: power down */
@@ -1858,7 +1803,7 @@
     local_info_t *lp = netdev_priv(dev);
     struct pcmcia_device *link = lp->p_dev;
 
-    DEBUG(0, "do_stop(%p)\n", dev);
+    dev_dbg(&link->dev, "do_stop(%p)\n", dev);
 
     if (!link)
 	return -ENODEV;
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index c1b3f09..dcc67a3 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1515,8 +1515,8 @@
 		if (request_region
 		    (ioaddr, PCNET32_TOTAL_SIZE, "pcnet32_probe_vlbus")) {
 			/* check if there is really a pcnet chip on that ioaddr */
-			if ((inb(ioaddr + 14) == 0x57)
-			    && (inb(ioaddr + 15) == 0x57)) {
+			if ((inb(ioaddr + 14) == 0x57) &&
+			    (inb(ioaddr + 15) == 0x57)) {
 				pcnet32_probe1(ioaddr, 0, NULL);
 			} else {
 				release_region(ioaddr, PCNET32_TOTAL_SIZE);
@@ -1610,8 +1610,8 @@
 		a = &pcnet32_wio;
 	} else {
 		pcnet32_dwio_reset(ioaddr);
-		if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
-		    && pcnet32_dwio_check(ioaddr)) {
+		if (pcnet32_dwio_read_csr(ioaddr, 0) == 4 &&
+		    pcnet32_dwio_check(ioaddr)) {
 			a = &pcnet32_dwio;
 		} else {
 			if (pcnet32_debug & NETIF_MSG_PROBE)
@@ -1750,8 +1750,8 @@
 	for (i = 0; i < 6; i++)
 		promaddr[i] = inb(ioaddr + i);
 
-	if (memcmp(promaddr, dev->dev_addr, 6)
-	    || !is_valid_ether_addr(dev->dev_addr)) {
+	if (memcmp(promaddr, dev->dev_addr, 6) ||
+	    !is_valid_ether_addr(dev->dev_addr)) {
 		if (is_valid_ether_addr(promaddr)) {
 			if (pcnet32_debug & NETIF_MSG_PROBE) {
 				printk(" warning: CSR address invalid,\n");
@@ -1840,8 +1840,8 @@
 	lp->mii = mii;
 	lp->chip_version = chip_version;
 	lp->msg_enable = pcnet32_debug;
-	if ((cards_found >= MAX_UNITS)
-	    || (options[cards_found] >= sizeof(options_mapping)))
+	if ((cards_found >= MAX_UNITS) ||
+	    (options[cards_found] >= sizeof(options_mapping)))
 		lp->options = PCNET32_PORT_ASEL;
 	else
 		lp->options = options_mapping[options[cards_found]];
@@ -1866,8 +1866,8 @@
 		goto err_free_ring;
 	}
 	/* detect special T1/E1 WAN card by checking for MAC address */
-	if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0
-	    && dev->dev_addr[2] == 0x75)
+	if (dev->dev_addr[0] == 0x00 && dev->dev_addr[1] == 0xe0 &&
+	    dev->dev_addr[2] == 0x75)
 		lp->options = PCNET32_PORT_FD | PCNET32_PORT_GPSI;
 
 	lp->init_block->mode = cpu_to_le16(0x0003);	/* Disable Rx and Tx. */
@@ -2095,7 +2095,7 @@
 	int rc;
 	unsigned long flags;
 
-	if (request_irq(dev->irq, &pcnet32_interrupt,
+	if (request_irq(dev->irq, pcnet32_interrupt,
 			lp->shared_irq ? IRQF_SHARED : 0, dev->name,
 			(void *)dev)) {
 		return -EAGAIN;
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f81e532..f63c96a 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -16,6 +16,7 @@
 
 #include <linux/module.h>
 #include <linux/phy.h>
+#include <linux/brcmphy.h>
 
 #define PHY_ID_BCM50610		0x0143bd60
 #define PHY_ID_BCM50610M	0x0143bd70
@@ -24,6 +25,9 @@
 #define BRCM_PHY_MODEL(phydev) \
 	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
 
+#define BRCM_PHY_REV(phydev) \
+	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
 
 #define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
 #define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
@@ -94,22 +98,35 @@
 #define BCM_LED_SRC_OFF		0xe	/* Tied high */
 #define BCM_LED_SRC_ON		0xf	/* Tied low */
 
+
 /*
  * BCM5482: Shadow registers
  * Shadow values go into bits [14:10] of register 0x1c to select a shadow
  * register to access.
  */
+/* 00101: Spare Control Register 3 */
+#define BCM54XX_SHD_SCR3		0x05
+#define  BCM54XX_SHD_SCR3_DEF_CLK125	0x0001
+#define  BCM54XX_SHD_SCR3_DLLAPD_DIS	0x0002
+#define  BCM54XX_SHD_SCR3_TRDDAPD	0x0004
+
+/* 01010: Auto Power-Down */
+#define BCM54XX_SHD_APD			0x0a
+#define  BCM54XX_SHD_APD_EN		0x0020
+
 #define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
 #define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
 					/* LED1 / ~LINKSPD[1] selector */
 #define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
+#define BCM54XX_SHD_RGMII_MODE	0x0b	/* 01011: RGMII Mode Selector */
 #define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
 #define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */
 #define BCM5482_SHD_SSD_EN	0x0001	/* SSD enable */
 #define BCM5482_SHD_MODE	0x1f	/* 11111: Mode Control Register */
 #define BCM5482_SHD_MODE_1000BX	0x0001	/* Enable 1000BASE-X registers */
 
+
 /*
  * EXPANSION SHADOW ACCESS REGISTERS.  (PHY REG 0x15, 0x16, and 0x17)
  */
@@ -138,16 +155,6 @@
 #define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
 #define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
 
-/*
- * Device flags for PHYs that can be configured for different operating
- * modes.
- */
-#define PHY_BCM_FLAGS_VALID		0x80000000
-#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
-#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
-#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
-#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
-
 
 /*****************************************************************************/
 /* Fast Ethernet Transceiver definitions. */
@@ -237,10 +244,43 @@
 	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
 }
 
+/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
 static int bcm50610_a0_workaround(struct phy_device *phydev)
 {
 	int err;
 
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
+				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+					MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
+				MII_BCM54XX_EXP_EXP75_VDACCTRL);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
+				MII_BCM54XX_EXP_EXP96_MYST);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
+				MII_BCM54XX_EXP_EXP97_MYST);
+
+	return err;
+}
+
+static int bcm54xx_phydsp_config(struct phy_device *phydev)
+{
+	int err, err2;
+
+	/* Enable the SMDSP clock */
 	err = bcm54xx_auxctl_write(phydev,
 				   MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
 				   MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
@@ -248,42 +288,101 @@
 	if (err < 0)
 		return err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
-				MII_BCM54XX_EXP_EXP08_RJCT_2MHZ	|
-				MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE);
-	if (err < 0)
-		goto error;
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
+		/* Clear bit 9 to fix a phy interop issue. */
+		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
+					MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
+		if (err < 0)
+			goto error;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
-				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
-				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
-	if (err < 0)
-		goto error;
+		if (phydev->drv->phy_id == PHY_ID_BCM50610) {
+			err = bcm50610_a0_workaround(phydev);
+			if (err < 0)
+				goto error;
+		}
+	}
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
-					MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
-	if (err < 0)
-		goto error;
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+		int val;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
-				MII_BCM54XX_EXP_EXP75_VDACCTRL);
-	if (err < 0)
-		goto error;
+		val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
+		if (val < 0)
+			goto error;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
-				MII_BCM54XX_EXP_EXP96_MYST);
-	if (err < 0)
-		goto error;
-
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
-				MII_BCM54XX_EXP_EXP97_MYST);
+		val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
+		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val);
+	}
 
 error:
-	bcm54xx_auxctl_write(phydev,
-			     MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
-			     MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+	/* Disable the SMDSP clock */
+	err2 = bcm54xx_auxctl_write(phydev,
+				    MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				    MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
 
-	return err;
+	/* Return the first error reported. */
+	return err ? err : err2;
+}
+
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+	u32 val, orig;
+	bool clk125en = true;
+
+	/* Abort if we are using an untested phy. */
+	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 ||
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+		return;
+
+	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    BRCM_PHY_REV(phydev) >= 0x3) {
+		/*
+		 * Here, bit 0 _disables_ CLK125 when set.
+		 * This bit is set by default.
+		 */
+		clk125en = false;
+	} else {
+		if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+			/* Here, bit 0 _enables_ CLK125 when set */
+			val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+			clk125en = false;
+		}
+	}
+
+	if (clk125en == false ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
+	else
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+
+	if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
+		val |= BCM54XX_SHD_SCR3_TRDDAPD;
+
+	if (orig != val)
+		bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if (clk125en == false ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val &= ~BCM54XX_SHD_APD_EN;
+
+	if (orig != val)
+		bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
 }
 
 static int bcm54xx_config_init(struct phy_device *phydev)
@@ -308,38 +407,17 @@
 	if (err < 0)
 		return err;
 
-	if (phydev->drv->phy_id == PHY_ID_BCM50610) {
-		err = bcm50610_a0_workaround(phydev);
-		if (err < 0)
-			return err;
-	}
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
+		bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
 
-	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
-		int err2;
+	if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
+	    (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		bcm54xx_adjust_rxrefclk(phydev);
 
-		err = bcm54xx_auxctl_write(phydev,
-					   MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
-					   MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
-					   MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
-		if (err < 0)
-			return err;
-
-		reg = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
-		if (reg < 0)
-			goto error;
-
-		reg |= MII_BCM54XX_EXP_EXP75_CM_OSC;
-		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, reg);
-
-error:
-		err2 = bcm54xx_auxctl_write(phydev,
-					    MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
-					    MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
-		if (err)
-			return err;
-		if (err2)
-			return err2;
-	}
+	bcm54xx_phydsp_config(phydev);
 
 	return 0;
 }
@@ -564,9 +642,11 @@
 	if (err < 0)
 		goto done;
 
-	/* Enable auto power down */
-	err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
-				       MII_BRCM_FET_SHDW_AS2_APDE);
+	if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
+		/* Enable auto power down */
+		err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+					       MII_BRCM_FET_SHDW_AS2_APDE);
+	}
 
 done:
 	/* Disable shadow register access */
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 6b71b00..b0e9f9c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -254,12 +254,12 @@
 	if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
 		return -EINVAL;
 
-	if (cmd->autoneg == AUTONEG_DISABLE
-			&& ((cmd->speed != SPEED_1000
-					&& cmd->speed != SPEED_100
-					&& cmd->speed != SPEED_10)
-				|| (cmd->duplex != DUPLEX_HALF
-					&& cmd->duplex != DUPLEX_FULL)))
+	if (cmd->autoneg == AUTONEG_DISABLE &&
+	    ((cmd->speed != SPEED_1000 &&
+	      cmd->speed != SPEED_100 &&
+	      cmd->speed != SPEED_10) ||
+	     (cmd->duplex != DUPLEX_HALF &&
+	      cmd->duplex != DUPLEX_FULL)))
 		return -EINVAL;
 
 	phydev->autoneg = cmd->autoneg;
@@ -353,9 +353,9 @@
 
 		phy_write(phydev, mii_data->reg_num, val);
 		
-		if (mii_data->reg_num == MII_BMCR 
-				&& val & BMCR_RESET
-				&& phydev->drv->config_init) {
+		if (mii_data->reg_num == MII_BMCR &&
+		    val & BMCR_RESET &&
+		    phydev->drv->config_init) {
 			phy_scan_fixups(phydev);
 			phydev->drv->config_init(phydev);
 		}
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index 00487f5..3327e9f 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -372,8 +372,8 @@
 
 	nl->is_deferred = 0;
 	f = connection_state_table[nl->connection];
-	if ((r = (*f)(nl->dev, nl, snd, rcv)) != OK
-	    && (r = plip_bh_timeout_error(nl->dev, nl, snd, rcv, r)) != OK) {
+	if ((r = (*f)(nl->dev, nl, snd, rcv)) != OK &&
+	    (r = plip_bh_timeout_error(nl->dev, nl, snd, rcv, r)) != OK) {
 		nl->is_deferred = 1;
 		schedule_delayed_work(&nl->deferred, 1);
 	}
@@ -416,9 +416,8 @@
 
 		if (error != ERROR) { /* Timeout */
 			nl->timeout_count++;
-			if ((error == HS_TIMEOUT
-			     && nl->timeout_count <= 10)
-			    || nl->timeout_count <= 3) {
+			if ((error == HS_TIMEOUT && nl->timeout_count <= 10) ||
+			    nl->timeout_count <= 3) {
 				spin_unlock_irq(&nl->lock);
 				/* Try again later */
 				return TIMEOUT;
@@ -624,8 +623,8 @@
 		if (plip_receive(nibble_timeout, dev,
 				 &rcv->nibble, &rcv->length.b.msb))
 			return TIMEOUT;
-		if (rcv->length.h > dev->mtu + dev->hard_header_len
-		    || rcv->length.h < 8) {
+		if (rcv->length.h > dev->mtu + dev->hard_header_len ||
+		    rcv->length.h < 8) {
 			printk(KERN_WARNING "%s: bogus packet size %d.\n", dev->name, rcv->length.h);
 			return ERROR;
 		}
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 6de8399..6a375ea 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -36,7 +36,7 @@
 
 #define PPP_VERSION	"2.4.2"
 
-#define OBUFSIZE	256
+#define OBUFSIZE	4096
 
 /* Structure for storing local state. */
 struct asyncppp {
@@ -337,10 +337,7 @@
 	return 0;
 }
 
-/*
- * This can now be called from hard interrupt level as well
- * as soft interrupt level or mainline.
- */
+/* May sleep, don't call from interrupt level or with interrupts disabled */
 static void
 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
 		  char *cflags, int count)
@@ -561,8 +558,8 @@
 		 * Start of a new packet - insert the leading FLAG
 		 * character if necessary.
 		 */
-		if (islcp || flag_time == 0
-		    || time_after_eq(jiffies, ap->last_xmit + flag_time))
+		if (islcp || flag_time == 0 ||
+		    time_after_eq(jiffies, ap->last_xmit + flag_time))
 			*buf++ = PPP_FLAG;
 		ap->last_xmit = jiffies;
 		fcs = PPP_INITFCS;
@@ -699,8 +696,8 @@
 		 */
 		clear_bit(XMIT_BUSY, &ap->xmit_flags);
 		/* any more work to do? if not, exit the loop */
-		if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
-		      || (!tty_stuffed && ap->tpkt)))
+		if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
+		      (!tty_stuffed && ap->tpkt)))
 			break;
 		/* more work to do, see if we can do it now */
 		if (test_and_set_bit(XMIT_BUSY, &ap->xmit_flags))
@@ -757,8 +754,8 @@
 
 	for (i = 0; i < count; ++i) {
 		c = buf[i];
-		if (c == PPP_ESCAPE || c == PPP_FLAG
-		    || (c < 0x20 && (ap->raccm & (1 << c)) != 0))
+		if (c == PPP_ESCAPE || c == PPP_FLAG ||
+		    (c < 0x20 && (ap->raccm & (1 << c)) != 0))
 			break;
 	}
 	return i;
diff --git a/drivers/net/ppp_deflate.c b/drivers/net/ppp_deflate.c
index 034c1c6..695bc83 100644
--- a/drivers/net/ppp_deflate.c
+++ b/drivers/net/ppp_deflate.c
@@ -111,11 +111,11 @@
 	struct ppp_deflate_state *state;
 	int w_size;
 
-	if (opt_len != CILEN_DEFLATE
-	    || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	    || options[1] != CILEN_DEFLATE
-	    || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	    || options[3] != DEFLATE_CHK_SEQUENCE)
+	if (opt_len != CILEN_DEFLATE ||
+	    (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) ||
+	    options[1] != CILEN_DEFLATE ||
+	    DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL ||
+	    options[3] != DEFLATE_CHK_SEQUENCE)
 		return NULL;
 	w_size = DEFLATE_SIZE(options[2]);
 	if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
@@ -163,12 +163,12 @@
 {
 	struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg;
 
-	if (opt_len < CILEN_DEFLATE
-	    || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	    || options[1] != CILEN_DEFLATE
-	    || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	    || DEFLATE_SIZE(options[2]) != state->w_size
-	    || options[3] != DEFLATE_CHK_SEQUENCE)
+	if (opt_len < CILEN_DEFLATE ||
+	    (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) ||
+	    options[1] != CILEN_DEFLATE ||
+	    DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL ||
+	    DEFLATE_SIZE(options[2]) != state->w_size ||
+	    options[3] != DEFLATE_CHK_SEQUENCE)
 		return 0;
 
 	state->seqno = 0;
@@ -330,11 +330,11 @@
 	struct ppp_deflate_state *state;
 	int w_size;
 
-	if (opt_len != CILEN_DEFLATE
-	    || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	    || options[1] != CILEN_DEFLATE
-	    || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	    || options[3] != DEFLATE_CHK_SEQUENCE)
+	if (opt_len != CILEN_DEFLATE ||
+	    (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) ||
+	    options[1] != CILEN_DEFLATE ||
+	    DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL ||
+	    options[3] != DEFLATE_CHK_SEQUENCE)
 		return NULL;
 	w_size = DEFLATE_SIZE(options[2]);
 	if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE)
@@ -381,12 +381,12 @@
 {
 	struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg;
 
-	if (opt_len < CILEN_DEFLATE
-	    || (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT)
-	    || options[1] != CILEN_DEFLATE
-	    || DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL
-	    || DEFLATE_SIZE(options[2]) != state->w_size
-	    || options[3] != DEFLATE_CHK_SEQUENCE)
+	if (opt_len < CILEN_DEFLATE ||
+	    (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) ||
+	    options[1] != CILEN_DEFLATE ||
+	    DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL ||
+	    DEFLATE_SIZE(options[2]) != state->w_size ||
+	    options[3] != DEFLATE_CHK_SEQUENCE)
 		return 0;
 
 	state->seqno = 0;
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 965adb61..2282e72 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -184,7 +184,7 @@
 static atomic_t channel_count = ATOMIC_INIT(0);
 
 /* per-net private data for this module */
-static int ppp_net_id;
+static int ppp_net_id __read_mostly;
 struct ppp_net {
 	/* units to ppp mapping */
 	struct idr units_idr;
@@ -425,8 +425,8 @@
 			 * network traffic (demand mode).
 			 */
 			struct ppp *ppp = PF_TO_PPP(pf);
-			if (ppp->n_channels == 0
-			    && (ppp->flags & SC_LOOP_TRAFFIC) == 0)
+			if (ppp->n_channels == 0 &&
+			    (ppp->flags & SC_LOOP_TRAFFIC) == 0)
 				break;
 		}
 		ret = -EAGAIN;
@@ -511,8 +511,8 @@
 	else if (pf->kind == INTERFACE) {
 		/* see comment in ppp_read */
 		struct ppp *ppp = PF_TO_PPP(pf);
-		if (ppp->n_channels == 0
-		    && (ppp->flags & SC_LOOP_TRAFFIC) == 0)
+		if (ppp->n_channels == 0 &&
+		    (ppp->flags & SC_LOOP_TRAFFIC) == 0)
 			mask |= POLLIN | POLLRDNORM;
 	}
 
@@ -864,12 +864,7 @@
 
 static __net_init int ppp_init_net(struct net *net)
 {
-	struct ppp_net *pn;
-	int err;
-
-	pn = kzalloc(sizeof(*pn), GFP_KERNEL);
-	if (!pn)
-		return -ENOMEM;
+	struct ppp_net *pn = net_generic(net, ppp_net_id);
 
 	idr_init(&pn->units_idr);
 	mutex_init(&pn->all_ppp_mutex);
@@ -879,32 +874,21 @@
 
 	spin_lock_init(&pn->all_channels_lock);
 
-	err = net_assign_generic(net, ppp_net_id, pn);
-	if (err) {
-		kfree(pn);
-		return err;
-	}
-
 	return 0;
 }
 
 static __net_exit void ppp_exit_net(struct net *net)
 {
-	struct ppp_net *pn;
+	struct ppp_net *pn = net_generic(net, ppp_net_id);
 
-	pn = net_generic(net, ppp_net_id);
 	idr_destroy(&pn->units_idr);
-	/*
-	 * if someone has cached our net then
-	 * further net_generic call will return NULL
-	 */
-	net_assign_generic(net, ppp_net_id, NULL);
-	kfree(pn);
 }
 
 static struct pernet_operations ppp_net_ops = {
 	.init = ppp_init_net,
 	.exit = ppp_exit_net,
+	.id   = &ppp_net_id,
+	.size = sizeof(struct ppp_net),
 };
 
 #define PPP_MAJOR	108
@@ -917,7 +901,7 @@
 
 	printk(KERN_INFO "PPP generic driver version " PPP_VERSION "\n");
 
-	err = register_pernet_gen_device(&ppp_net_id, &ppp_net_ops);
+	err = register_pernet_device(&ppp_net_ops);
 	if (err) {
 		printk(KERN_ERR "failed to register PPP pernet device (%d)\n", err);
 		goto out;
@@ -943,7 +927,7 @@
 out_chrdev:
 	unregister_chrdev(PPP_MAJOR, "ppp");
 out_net:
-	unregister_pernet_gen_device(ppp_net_id, &ppp_net_ops);
+	unregister_pernet_device(&ppp_net_ops);
 out:
 	return err;
 }
@@ -1073,8 +1057,8 @@
 	ppp_xmit_lock(ppp);
 	if (!ppp->closing) {
 		ppp_push(ppp);
-		while (!ppp->xmit_pending
-		       && (skb = skb_dequeue(&ppp->file.xq)))
+		while (!ppp->xmit_pending &&
+		       (skb = skb_dequeue(&ppp->file.xq)))
 			ppp_send_frame(ppp, skb);
 		/* If there's no work left to do, tell the core net
 		   code that we can accept some more. */
@@ -1153,18 +1137,18 @@
 		/* the filter instructions are constructed assuming
 		   a four-byte PPP header on each packet */
 		*skb_push(skb, 2) = 1;
-		if (ppp->pass_filter
-		    && sk_run_filter(skb, ppp->pass_filter,
-				     ppp->pass_len) == 0) {
+		if (ppp->pass_filter &&
+		    sk_run_filter(skb, ppp->pass_filter,
+				  ppp->pass_len) == 0) {
 			if (ppp->debug & 1)
 				printk(KERN_DEBUG "PPP: outbound frame not passed\n");
 			kfree_skb(skb);
 			return;
 		}
 		/* if this packet passes the active filter, record the time */
-		if (!(ppp->active_filter
-		      && sk_run_filter(skb, ppp->active_filter,
-				       ppp->active_len) == 0))
+		if (!(ppp->active_filter &&
+		      sk_run_filter(skb, ppp->active_filter,
+				    ppp->active_len) == 0))
 			ppp->last_xmit = jiffies;
 		skb_pull(skb, 2);
 #else
@@ -1218,8 +1202,8 @@
 	}
 
 	/* try to do packet compression */
-	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state
-	    && proto != PPP_LCP && proto != PPP_CCP) {
+	if ((ppp->xstate & SC_COMP_RUN) && ppp->xc_state &&
+	    proto != PPP_LCP && proto != PPP_CCP) {
 		if (!(ppp->flags & SC_CCP_UP) && (ppp->flags & SC_MUST_COMP)) {
 			if (net_ratelimit())
 				printk(KERN_ERR "ppp: compression required but down - pkt dropped.\n");
@@ -1593,8 +1577,8 @@
 		/* put it on the channel queue */
 		skb_queue_tail(&pch->file.rq, skb);
 		/* drop old frames if queue too long */
-		while (pch->file.rq.qlen > PPP_MAX_RQLEN
-		       && (skb = skb_dequeue(&pch->file.rq)))
+		while (pch->file.rq.qlen > PPP_MAX_RQLEN &&
+		       (skb = skb_dequeue(&pch->file.rq)))
 			kfree_skb(skb);
 		wake_up_interruptible(&pch->file.rwait);
 	} else {
@@ -1670,8 +1654,8 @@
 	 * Note that some decompressors need to see uncompressed frames
 	 * that come in as well as compressed frames.
 	 */
-	if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN)
-	    && (ppp->rstate & (SC_DC_FERROR | SC_DC_ERROR)) == 0)
+	if (ppp->rc_state && (ppp->rstate & SC_DECOMP_RUN) &&
+	    (ppp->rstate & (SC_DC_FERROR | SC_DC_ERROR)) == 0)
 		skb = ppp_decompress_frame(ppp, skb);
 
 	if (ppp->flags & SC_MUST_COMP && ppp->rstate & SC_DC_FERROR)
@@ -1742,8 +1726,8 @@
 		/* control or unknown frame - pass it to pppd */
 		skb_queue_tail(&ppp->file.rq, skb);
 		/* limit queue length by dropping old frames */
-		while (ppp->file.rq.qlen > PPP_MAX_RQLEN
-		       && (skb = skb_dequeue(&ppp->file.rq)))
+		while (ppp->file.rq.qlen > PPP_MAX_RQLEN &&
+		       (skb = skb_dequeue(&ppp->file.rq)))
 			kfree_skb(skb);
 		/* wake up any process polling or blocking on read */
 		wake_up_interruptible(&ppp->file.rwait);
@@ -1761,26 +1745,26 @@
 				goto err;
 
 			*skb_push(skb, 2) = 0;
-			if (ppp->pass_filter
-			    && sk_run_filter(skb, ppp->pass_filter,
-					     ppp->pass_len) == 0) {
+			if (ppp->pass_filter &&
+			    sk_run_filter(skb, ppp->pass_filter,
+					  ppp->pass_len) == 0) {
 				if (ppp->debug & 1)
 					printk(KERN_DEBUG "PPP: inbound frame "
 					       "not passed\n");
 				kfree_skb(skb);
 				return;
 			}
-			if (!(ppp->active_filter
-			      && sk_run_filter(skb, ppp->active_filter,
-					       ppp->active_len) == 0))
+			if (!(ppp->active_filter &&
+			      sk_run_filter(skb, ppp->active_filter,
+					    ppp->active_len) == 0))
 				ppp->last_recv = jiffies;
 			__skb_pull(skb, 2);
 		} else
 #endif /* CONFIG_PPP_FILTER */
 			ppp->last_recv = jiffies;
 
-		if ((ppp->dev->flags & IFF_UP) == 0
-		    || ppp->npmode[npi] != NPMODE_PASS) {
+		if ((ppp->dev->flags & IFF_UP) == 0 ||
+		    ppp->npmode[npi] != NPMODE_PASS) {
 			kfree_skb(skb);
 		} else {
 			/* chop off protocol */
@@ -2244,13 +2228,13 @@
 	unsigned char ccp_option[CCP_MAX_OPTION_LENGTH];
 
 	err = -EFAULT;
-	if (copy_from_user(&data, (void __user *) arg, sizeof(data))
-	    || (data.length <= CCP_MAX_OPTION_LENGTH
-		&& copy_from_user(ccp_option, (void __user *) data.ptr, data.length)))
+	if (copy_from_user(&data, (void __user *) arg, sizeof(data)) ||
+	    (data.length <= CCP_MAX_OPTION_LENGTH &&
+	     copy_from_user(ccp_option, (void __user *) data.ptr, data.length)))
 		goto out;
 	err = -EINVAL;
-	if (data.length > CCP_MAX_OPTION_LENGTH
-	    || ccp_option[1] < 2 || ccp_option[1] > data.length)
+	if (data.length > CCP_MAX_OPTION_LENGTH ||
+	    ccp_option[1] < 2 || ccp_option[1] > data.length)
 		goto out;
 
 	cp = try_then_request_module(
@@ -2835,7 +2819,7 @@
 	unregister_chrdev(PPP_MAJOR, "ppp");
 	device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0));
 	class_destroy(ppp_class);
-	unregister_pernet_gen_device(ppp_net_id, &ppp_net_ops);
+	unregister_pernet_device(&ppp_net_ops);
 }
 
 /*
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c
index 88f03c9..6d1a1b8 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp_mppe.c
@@ -195,8 +195,8 @@
 	struct ppp_mppe_state *state;
 	unsigned int digestsize;
 
-	if (optlen != CILEN_MPPE + sizeof(state->master_key)
-	    || options[0] != CI_MPPE || options[1] != CILEN_MPPE)
+	if (optlen != CILEN_MPPE + sizeof(state->master_key) ||
+	    options[0] != CI_MPPE || options[1] != CILEN_MPPE)
 		goto out;
 
 	state = kzalloc(sizeof(*state), GFP_KERNEL);
@@ -276,8 +276,8 @@
 	struct ppp_mppe_state *state = (struct ppp_mppe_state *) arg;
 	unsigned char mppe_opts;
 
-	if (optlen != CILEN_MPPE
-	    || options[0] != CI_MPPE || options[1] != CILEN_MPPE)
+	if (optlen != CILEN_MPPE ||
+	    options[0] != CI_MPPE || options[1] != CILEN_MPPE)
 		return 0;
 
 	MPPE_CI_TO_OPTS(&options[2], mppe_opts);
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index d2fa2db..3a13cec 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -378,10 +378,7 @@
 	return 0;
 }
 
-/*
- * This can now be called from hard interrupt level as well
- * as soft interrupt level or mainline.
- */
+/* May sleep, don't call from interrupt level or with interrupts disabled */
 static void
 ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf,
 		  char *cflags, int count)
@@ -665,8 +662,8 @@
 		}
 		/* haven't made any progress */
 		spin_unlock_bh(&ap->xmit_lock);
-		if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags)
-		      || (!tty_stuffed && ap->tpkt)))
+		if (!(test_bit(XMIT_WAKEUP, &ap->xmit_flags) ||
+		      (!tty_stuffed && ap->tpkt)))
 			break;
 		if (!spin_trylock_bh(&ap->xmit_lock))
 			break;
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 2559991..cdd11ba 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -97,7 +97,7 @@
 static struct ppp_channel_ops pppoe_chan_ops;
 
 /* per-net private data for this module */
-static int pppoe_net_id;
+static int pppoe_net_id __read_mostly;
 struct pppoe_net {
 	/*
 	 * we could use _single_ hash table for all
@@ -250,20 +250,19 @@
 {
 	struct net_device *dev;
 	struct pppoe_net *pn;
-	struct pppox_sock *pppox_sock;
+	struct pppox_sock *pppox_sock = NULL;
 
 	int ifindex;
 
-	dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev);
-	if (!dev)
-		return NULL;
-
-	ifindex = dev->ifindex;
-	pn = net_generic(net, pppoe_net_id);
-	pppox_sock = get_item(pn, sp->sa_addr.pppoe.sid,
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(net, sp->sa_addr.pppoe.dev);
+	if (dev) {
+		ifindex = dev->ifindex;
+		pn = net_generic(net, pppoe_net_id);
+		pppox_sock = get_item(pn, sp->sa_addr.pppoe.sid,
 				sp->sa_addr.pppoe.remote, ifindex);
-	dev_put(dev);
-
+	}
+	rcu_read_unlock();
 	return pppox_sock;
 }
 
@@ -324,8 +323,8 @@
 			write_unlock_bh(&pn->hash_lock);
 			lock_sock(sk);
 
-			if (po->pppoe_dev == dev
-			    && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+			if (po->pppoe_dev == dev &&
+			    sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
 				pppox_unbind_sock(sk);
 				sk->sk_state = PPPOX_ZOMBIE;
 				sk->sk_state_change(sk);
@@ -1140,59 +1139,37 @@
 
 static __net_init int pppoe_init_net(struct net *net)
 {
-	struct pppoe_net *pn;
+	struct pppoe_net *pn = pppoe_pernet(net);
 	struct proc_dir_entry *pde;
-	int err;
-
-	pn = kzalloc(sizeof(*pn), GFP_KERNEL);
-	if (!pn)
-		return -ENOMEM;
 
 	rwlock_init(&pn->hash_lock);
 
-	err = net_assign_generic(net, pppoe_net_id, pn);
-	if (err)
-		goto out;
-
 	pde = proc_net_fops_create(net, "pppoe", S_IRUGO, &pppoe_seq_fops);
 #ifdef CONFIG_PROC_FS
-	if (!pde) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!pde)
+		return -ENOMEM;
 #endif
 
 	return 0;
-
-out:
-	kfree(pn);
-	return err;
 }
 
 static __net_exit void pppoe_exit_net(struct net *net)
 {
-	struct pppoe_net *pn;
-
 	proc_net_remove(net, "pppoe");
-	pn = net_generic(net, pppoe_net_id);
-	/*
-	 * if someone has cached our net then
-	 * further net_generic call will return NULL
-	 */
-	net_assign_generic(net, pppoe_net_id, NULL);
-	kfree(pn);
 }
 
 static struct pernet_operations pppoe_net_ops = {
 	.init = pppoe_init_net,
 	.exit = pppoe_exit_net,
+	.id   = &pppoe_net_id,
+	.size = sizeof(struct pppoe_net),
 };
 
 static int __init pppoe_init(void)
 {
 	int err;
 
-	err = register_pernet_gen_device(&pppoe_net_id, &pppoe_net_ops);
+	err = register_pernet_device(&pppoe_net_ops);
 	if (err)
 		goto out;
 
@@ -1213,7 +1190,7 @@
 out_unregister_pppoe_proto:
 	proto_unregister(&pppoe_sk_proto);
 out_unregister_net_ops:
-	unregister_pernet_gen_device(pppoe_net_id, &pppoe_net_ops);
+	unregister_pernet_device(&pppoe_net_ops);
 out:
 	return err;
 }
@@ -1225,7 +1202,7 @@
 	dev_remove_pack(&pppoes_ptype);
 	unregister_pppox_proto(PX_PROTO_OE);
 	proto_unregister(&pppoe_sk_proto);
-	unregister_pernet_gen_device(pppoe_net_id, &pppoe_net_ops);
+	unregister_pernet_device(&pppoe_net_ops);
 }
 
 module_init(pppoe_init);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 5910df6..9fbb2eb 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -232,7 +232,7 @@
 static const struct proto_ops pppol2tp_ops;
 
 /* per-net private data for this module */
-static int pppol2tp_net_id;
+static int pppol2tp_net_id __read_mostly;
 struct pppol2tp_net {
 	struct list_head pppol2tp_tunnel_list;
 	rwlock_t pppol2tp_tunnel_list_lock;
@@ -516,7 +516,7 @@
 		return 0;
 
 	inet = inet_sk(sk);
-	psum = csum_tcpudp_nofold(inet->saddr, inet->daddr, ulen,
+	psum = csum_tcpudp_nofold(inet->inet_saddr, inet->inet_daddr, ulen,
 				  IPPROTO_UDP, 0);
 
 	if ((skb->ip_summed == CHECKSUM_COMPLETE) &&
@@ -949,8 +949,8 @@
 	inet = inet_sk(sk_tun);
 	udp_len = hdr_len + sizeof(ppph) + total_len;
 	uh = (struct udphdr *) skb->data;
-	uh->source = inet->sport;
-	uh->dest = inet->dport;
+	uh->source = inet->inet_sport;
+	uh->dest = inet->inet_dport;
 	uh->len = htons(udp_len);
 	uh->check = 0;
 	skb_put(skb, sizeof(struct udphdr));
@@ -978,7 +978,8 @@
 	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
-		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = csum_tcpudp_magic(inet->inet_saddr,
+					      inet->inet_daddr,
 					      udp_len, IPPROTO_UDP, csum);
 		if (uh->check == 0)
 			uh->check = CSUM_MANGLED_0;
@@ -986,7 +987,8 @@
 		skb->ip_summed = CHECKSUM_PARTIAL;
 		skb->csum_start = skb_transport_header(skb) - skb->head;
 		skb->csum_offset = offsetof(struct udphdr, check);
-		uh->check = ~csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = ~csum_tcpudp_magic(inet->inet_saddr,
+					       inet->inet_daddr,
 					       udp_len, IPPROTO_UDP, 0);
 	}
 
@@ -1136,8 +1138,8 @@
 	__skb_push(skb, sizeof(*uh));
 	skb_reset_transport_header(skb);
 	uh = udp_hdr(skb);
-	uh->source = inet->sport;
-	uh->dest = inet->dport;
+	uh->source = inet->inet_sport;
+	uh->dest = inet->inet_dport;
 	uh->len = htons(udp_len);
 	uh->check = 0;
 
@@ -1181,7 +1183,8 @@
 	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
-		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = csum_tcpudp_magic(inet->inet_saddr,
+					      inet->inet_daddr,
 					      udp_len, IPPROTO_UDP, csum);
 		if (uh->check == 0)
 			uh->check = CSUM_MANGLED_0;
@@ -1189,7 +1192,8 @@
 		skb->ip_summed = CHECKSUM_PARTIAL;
 		skb->csum_start = skb_transport_header(skb) - skb->head;
 		skb->csum_offset = offsetof(struct udphdr, check);
-		uh->check = ~csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = ~csum_tcpudp_magic(inet->inet_saddr,
+					       inet->inet_daddr,
 					       udp_len, IPPROTO_UDP, 0);
 	}
 
@@ -1533,7 +1537,7 @@
 	 * if the tunnel socket goes away.
 	 */
 	tunnel->old_sk_destruct = sk->sk_destruct;
-	sk->sk_destruct = &pppol2tp_tunnel_destruct;
+	sk->sk_destruct = pppol2tp_tunnel_destruct;
 
 	tunnel->sock = sk;
 	sk->sk_allocation = GFP_ATOMIC;
@@ -2601,53 +2605,31 @@
 
 static __net_init int pppol2tp_init_net(struct net *net)
 {
-	struct pppol2tp_net *pn;
+	struct pppol2tp_net *pn = pppol2tp_pernet(net);
 	struct proc_dir_entry *pde;
-	int err;
-
-	pn = kzalloc(sizeof(*pn), GFP_KERNEL);
-	if (!pn)
-		return -ENOMEM;
 
 	INIT_LIST_HEAD(&pn->pppol2tp_tunnel_list);
 	rwlock_init(&pn->pppol2tp_tunnel_list_lock);
 
-	err = net_assign_generic(net, pppol2tp_net_id, pn);
-	if (err)
-		goto out;
-
 	pde = proc_net_fops_create(net, "pppol2tp", S_IRUGO, &pppol2tp_proc_fops);
 #ifdef CONFIG_PROC_FS
-	if (!pde) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!pde)
+		return -ENOMEM;
 #endif
 
 	return 0;
-
-out:
-	kfree(pn);
-	return err;
 }
 
 static __net_exit void pppol2tp_exit_net(struct net *net)
 {
-	struct pppoe_net *pn;
-
 	proc_net_remove(net, "pppol2tp");
-	pn = net_generic(net, pppol2tp_net_id);
-	/*
-	 * if someone has cached our net then
-	 * further net_generic call will return NULL
-	 */
-	net_assign_generic(net, pppol2tp_net_id, NULL);
-	kfree(pn);
 }
 
 static struct pernet_operations pppol2tp_net_ops = {
 	.init = pppol2tp_init_net,
 	.exit = pppol2tp_exit_net,
+	.id   = &pppol2tp_net_id,
+	.size = sizeof(struct pppol2tp_net),
 };
 
 static int __init pppol2tp_init(void)
@@ -2661,7 +2643,7 @@
 	if (err)
 		goto out_unregister_pppol2tp_proto;
 
-	err = register_pernet_gen_device(&pppol2tp_net_id, &pppol2tp_net_ops);
+	err = register_pernet_device(&pppol2tp_net_ops);
 	if (err)
 		goto out_unregister_pppox_proto;
 
@@ -2680,7 +2662,7 @@
 static void __exit pppol2tp_exit(void)
 {
 	unregister_pppox_proto(PX_PROTO_OL2TP);
-	unregister_pernet_gen_device(pppol2tp_net_id, &pppol2tp_net_ops);
+	unregister_pernet_device(&pppol2tp_net_ops);
 	proto_unregister(&pppol2tp_sk_proto);
 }
 
diff --git a/drivers/net/pppox.c b/drivers/net/pppox.c
index 4f6d33f..ac806b2 100644
--- a/drivers/net/pppox.c
+++ b/drivers/net/pppox.c
@@ -104,7 +104,8 @@
 
 EXPORT_SYMBOL(pppox_ioctl);
 
-static int pppox_create(struct net *net, struct socket *sock, int protocol)
+static int pppox_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	int rc = -EPROTOTYPE;
 
@@ -125,7 +126,7 @@
 	return rc;
 }
 
-static struct net_proto_family pppox_proto_family = {
+static const struct net_proto_family pppox_proto_family = {
 	.family	= PF_PPPOX,
 	.create	= pppox_create,
 	.owner	= THIS_MODULE,
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index b211613..89c4948 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -95,11 +95,11 @@
 
 	lv1_net_control(bus_id(card), dev_id(card),
 			GELIC_LV1_GET_ETH_PORT_STATUS,
-			GELIC_LV1_VLAN_TX_ETHERNET, 0, 0,
+			GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
 			&card->ether_port_status, &v2);
 
 	if (inform) {
-		ether_netdev = card->netdev[GELIC_PORT_ETHERNET];
+		ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
 		if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
 			netif_carrier_on(ether_netdev);
 		else
@@ -107,6 +107,24 @@
 	}
 }
 
+static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
+{
+	int status;
+	u64 v1, v2;
+
+	status = lv1_net_control(bus_id(card), dev_id(card),
+				 GELIC_LV1_SET_NEGOTIATION_MODE,
+				 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
+	if (status) {
+		pr_info("%s: failed setting negotiation mode %d\n", __func__,
+			status);
+		return -EBUSY;
+	}
+
+	card->link_mode = mode;
+	return 0;
+}
+
 void gelic_card_up(struct gelic_card *card)
 {
 	pr_debug("%s: called\n", __func__);
@@ -451,14 +469,14 @@
 
 static void gelic_card_stop_queues(struct gelic_card *card)
 {
-	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET]);
+	netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 
 	if (card->netdev[GELIC_PORT_WIRELESS])
 		netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
 }
 static void gelic_card_wake_queues(struct gelic_card *card)
 {
-	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET]);
+	netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
 
 	if (card->netdev[GELIC_PORT_WIRELESS])
 		netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
@@ -999,7 +1017,7 @@
 			goto refill;
 		}
 	} else
-		netdev = card->netdev[GELIC_PORT_ETHERNET];
+		netdev = card->netdev[GELIC_PORT_ETHERNET_0];
 
 	if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
 	    (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
@@ -1244,14 +1262,58 @@
 	cmd->supported = SUPPORTED_TP | SUPPORTED_Autoneg |
 			SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
 			SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
-			SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
+			SUPPORTED_1000baseT_Full;
 	cmd->advertising = cmd->supported;
-	cmd->autoneg = AUTONEG_ENABLE; /* always enabled */
+	if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
+		cmd->autoneg = AUTONEG_ENABLE;
+	} else {
+		cmd->autoneg = AUTONEG_DISABLE;
+		cmd->advertising &= ~ADVERTISED_Autoneg;
+	}
 	cmd->port = PORT_TP;
 
 	return 0;
 }
 
+static int gelic_ether_set_settings(struct net_device *netdev,
+				    struct ethtool_cmd *cmd)
+{
+	struct gelic_card *card = netdev_card(netdev);
+	u64 mode;
+	int ret;
+
+	if (cmd->autoneg == AUTONEG_ENABLE) {
+		mode = GELIC_LV1_ETHER_AUTO_NEG;
+	} else {
+		switch (cmd->speed) {
+		case SPEED_10:
+			mode = GELIC_LV1_ETHER_SPEED_10;
+			break;
+		case SPEED_100:
+			mode = GELIC_LV1_ETHER_SPEED_100;
+			break;
+		case SPEED_1000:
+			mode = GELIC_LV1_ETHER_SPEED_1000;
+			break;
+		default:
+			return -EINVAL;
+		}
+		if (cmd->duplex == DUPLEX_FULL)
+			mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
+		else if (cmd->speed == SPEED_1000) {
+			pr_info("1000 half duplex is not supported.\n");
+			return -EINVAL;
+		}
+	}
+
+	ret = gelic_card_set_link_mode(card, mode);
+
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 u32 gelic_net_get_rx_csum(struct net_device *netdev)
 {
 	struct gelic_card *card = netdev_card(netdev);
@@ -1349,6 +1411,7 @@
 static const struct ethtool_ops gelic_ether_ethtool_ops = {
 	.get_drvinfo	= gelic_net_get_drvinfo,
 	.get_settings	= gelic_ether_get_settings,
+	.set_settings	= gelic_ether_set_settings,
 	.get_link	= ethtool_op_get_link,
 	.get_tx_csum	= ethtool_op_get_tx_csum,
 	.set_tx_csum	= ethtool_op_set_tx_csum,
@@ -1369,7 +1432,7 @@
 {
 	struct gelic_card *card =
 		container_of(work, struct gelic_card, tx_timeout_task);
-	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET];
+	struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
 
 	dev_info(ctodev(card), "%s:Timed out. Restarting... \n", __func__);
 
@@ -1531,10 +1594,10 @@
 	/* gelic_port */
 	port->netdev = *netdev;
 	port->card = card;
-	port->type = GELIC_PORT_ETHERNET;
+	port->type = GELIC_PORT_ETHERNET_0;
 
 	/* gelic_card */
-	card->netdev[GELIC_PORT_ETHERNET] = *netdev;
+	card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
 
 	INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
 	init_waitqueue_head(&card->waitq);
@@ -1554,9 +1617,9 @@
 		int tx;
 		int rx;
 	} vlan_id_ix[2] = {
-		[GELIC_PORT_ETHERNET] = {
-			.tx = GELIC_LV1_VLAN_TX_ETHERNET,
-			.rx = GELIC_LV1_VLAN_RX_ETHERNET
+		[GELIC_PORT_ETHERNET_0] = {
+			.tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
+			.rx = GELIC_LV1_VLAN_RX_ETHERNET_0
 		},
 		[GELIC_PORT_WIRELESS] = {
 			.tx = GELIC_LV1_VLAN_TX_WIRELESS,
@@ -1601,7 +1664,7 @@
 			i, card->vlan[i].tx, card->vlan[i].rx);
 	}
 
-	if (card->vlan[GELIC_PORT_ETHERNET].tx) {
+	if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
 		BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
 		card->vlan_required = 1;
 	} else
@@ -1657,6 +1720,8 @@
 	/* get internal vlan info */
 	gelic_card_get_vlan_info(card);
 
+	card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
+
 	/* setup interrupt */
 	result = lv1_net_set_interrupt_status_indicator(bus_id(card),
 							dev_id(card),
@@ -1773,6 +1838,9 @@
 	struct net_device *netdev0;
 	pr_debug("%s: called\n", __func__);
 
+	/* set auto-negotiation */
+	gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
+
 #ifdef CONFIG_GELIC_WIRELESS
 	gelic_wl_driver_remove(card);
 #endif
@@ -1790,7 +1858,7 @@
 	gelic_card_free_chain(card, card->tx_top);
 	gelic_card_free_chain(card, card->rx_top);
 
-	netdev0 = card->netdev[GELIC_PORT_ETHERNET];
+	netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
 	/* disconnect event port */
 	free_irq(card->irq, card);
 	netdev0->irq = NO_IRQ;
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 8b41386..32521ae 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -186,7 +186,7 @@
 	GELIC_LV1_GET_CHANNEL           = 6,
 	GELIC_LV1_POST_WLAN_CMD		= 9,
 	GELIC_LV1_GET_WLAN_CMD_RESULT	= 10,
-	GELIC_LV1_GET_WLAN_EVENT	= 11
+	GELIC_LV1_GET_WLAN_EVENT	= 11,
 };
 
 /* for GELIC_LV1_SET_WOL */
@@ -217,24 +217,29 @@
 	GELIC_LV1_ETHER_SPEED_10	= 0x0000000000000010L,
 	GELIC_LV1_ETHER_SPEED_100	= 0x0000000000000020L,
 	GELIC_LV1_ETHER_SPEED_1000	= 0x0000000000000040L,
-	GELIC_LV1_ETHER_SPEED_MASK	= 0x0000000000000070L
+	GELIC_LV1_ETHER_SPEED_MASK	= 0x0000000000000070L,
 };
 
 enum gelic_lv1_vlan_index {
 	/* for outgoing packets */
-	GELIC_LV1_VLAN_TX_ETHERNET	= 0x0000000000000002L,
+	GELIC_LV1_VLAN_TX_ETHERNET_0	= 0x0000000000000002L,
 	GELIC_LV1_VLAN_TX_WIRELESS	= 0x0000000000000003L,
+
 	/* for incoming packets */
-	GELIC_LV1_VLAN_RX_ETHERNET	= 0x0000000000000012L,
-	GELIC_LV1_VLAN_RX_WIRELESS	= 0x0000000000000013L
+	GELIC_LV1_VLAN_RX_ETHERNET_0	= 0x0000000000000012L,
+	GELIC_LV1_VLAN_RX_WIRELESS	= 0x0000000000000013L,
+};
+
+enum gelic_lv1_phy {
+	GELIC_LV1_PHY_ETHERNET_0	= 0x0000000000000002L,
 };
 
 /* size of hardware part of gelic descriptor */
 #define GELIC_DESCR_SIZE	(32)
 
 enum gelic_port_type {
-	GELIC_PORT_ETHERNET = 0,
-	GELIC_PORT_WIRELESS = 1,
+	GELIC_PORT_ETHERNET_0	= 0,
+	GELIC_PORT_WIRELESS	= 1,
 	GELIC_PORT_MAX
 };
 
@@ -302,6 +307,8 @@
 	atomic_t users;
 
 	u64 ether_port_status;
+	int link_mode;
+
 	/* original address returned by kzalloc */
 	void *unalign;
 
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 4c61051..e3e6bc9 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1969,8 +1969,8 @@
 	struct ql_rcv_buf_cb *lrg_buf_cb;
 	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
 
-	if ((qdev->lrg_buf_free_count >= 8)
-	    && (qdev->lrg_buf_release_cnt >= 16)) {
+	if ((qdev->lrg_buf_free_count >= 8) &&
+	    (qdev->lrg_buf_release_cnt >= 16)) {
 
 		if (qdev->lrg_buf_skb_check)
 			if (!ql_populate_free_queue(qdev))
@@ -1978,8 +1978,8 @@
 
 		lrg_buf_q_ele = qdev->lrg_buf_next_free;
 
-		while ((qdev->lrg_buf_release_cnt >= 16)
-		       && (qdev->lrg_buf_free_count >= 8)) {
+		while ((qdev->lrg_buf_release_cnt >= 16) &&
+		       (qdev->lrg_buf_free_count >= 8)) {
 
 			for (i = 0; i < 8; i++) {
 				lrg_buf_cb =
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index c2383ad..862c1aa 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -16,7 +16,7 @@
  */
 #define DRV_NAME  	"qlge"
 #define DRV_STRING 	"QLogic 10 Gigabit PCI-E Ethernet Driver "
-#define DRV_VERSION	"v1.00.00-b3"
+#define DRV_VERSION	"v1.00.00.23.00.00-01"
 
 #define PFX "qlge: "
 #define QPRINTK(qdev, nlevel, klevel, fmt, args...)     \
@@ -54,8 +54,10 @@
 #define RX_RING_SHADOW_SPACE	(sizeof(u64) + \
 		MAX_DB_PAGES_PER_BQ(NUM_SMALL_BUFFERS) * sizeof(u64) + \
 		MAX_DB_PAGES_PER_BQ(NUM_LARGE_BUFFERS) * sizeof(u64))
-#define SMALL_BUFFER_SIZE 256
-#define LARGE_BUFFER_SIZE	PAGE_SIZE
+#define SMALL_BUFFER_SIZE 512
+#define SMALL_BUF_MAP_SIZE (SMALL_BUFFER_SIZE / 2)
+#define LARGE_BUFFER_MAX_SIZE 8192
+#define LARGE_BUFFER_MIN_SIZE 2048
 #define MAX_SPLIT_SIZE 1023
 #define QLGE_SB_PAD 32
 
@@ -795,6 +797,7 @@
 	MB_WOL_BCAST = (1 << 5),
 	MB_WOL_LINK_UP = (1 << 6),
 	MB_WOL_LINK_DOWN = (1 << 7),
+	MB_WOL_MODE_ON = (1 << 16),		/* Wake on Lan Mode on */
 	MB_CMD_SET_WOL_FLTR = 0x00000111,	/* Wake On Lan Filter */
 	MB_CMD_CLEAR_WOL_FLTR = 0x00000112, /* Wake On Lan Filter */
 	MB_CMD_SET_WOL_MAGIC = 0x00000113,	/* Wake On Lan Magic Packet */
@@ -804,12 +807,27 @@
 	MB_CMD_SET_PORT_CFG = 0x00000122,
 	MB_CMD_GET_PORT_CFG = 0x00000123,
 	MB_CMD_GET_LINK_STS = 0x00000124,
+	MB_CMD_SET_LED_CFG = 0x00000125, /* Set LED Configuration Register */
+		QL_LED_BLINK = 0x03e803e8,
+	MB_CMD_GET_LED_CFG = 0x00000126, /* Get LED Configuration Register */
 	MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
 	MB_SET_MPI_TFK_STOP = (1 << 0),
 	MB_SET_MPI_TFK_RESUME = (1 << 1),
 	MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
 	MB_GET_MPI_TFK_STOPPED = (1 << 0),
 	MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
+	/* Sub-commands for IDC request.
+	 * This describes the reason for the
+	 * IDC request.
+	 */
+	MB_CMD_IOP_NONE = 0x0000,
+	MB_CMD_IOP_PREP_UPDATE_MPI	= 0x0001,
+	MB_CMD_IOP_COMP_UPDATE_MPI	= 0x0002,
+	MB_CMD_IOP_PREP_LINK_DOWN	= 0x0010,
+	MB_CMD_IOP_DVR_START	 = 0x0100,
+	MB_CMD_IOP_FLASH_ACC	 = 0x0101,
+	MB_CMD_IOP_RESTART_MPI	= 0x0102,
+	MB_CMD_IOP_CORE_DUMP_MPI	= 0x0103,
 
 	/* Mailbox Command Status. */
 	MB_CMD_STS_GOOD = 0x00004000,	/* Success. */
@@ -1201,9 +1219,17 @@
 	struct tx_ring_desc *next;
 };
 
+struct page_chunk {
+	struct page *page;	/* master page */
+	char *va;		/* virt addr for this chunk */
+	u64 map;		/* mapping for master */
+	unsigned int offset;	/* offset for this chunk */
+	unsigned int last_flag; /* flag set for last chunk in page */
+};
+
 struct bq_desc {
 	union {
-		struct page *lbq_page;
+		struct page_chunk pg_chunk;
 		struct sk_buff *skb;
 	} p;
 	__le64 *addr;
@@ -1237,6 +1263,9 @@
 	atomic_t queue_stopped;	/* Turns queue off when full. */
 	struct delayed_work tx_work;
 	struct ql_adapter *qdev;
+	u64 tx_packets;
+	u64 tx_bytes;
+	u64 tx_errors;
 };
 
 /*
@@ -1272,6 +1301,7 @@
 	dma_addr_t lbq_base_dma;
 	void *lbq_base_indirect;
 	dma_addr_t lbq_base_indirect_dma;
+	struct page_chunk pg_chunk; /* current page for chunks */
 	struct bq_desc *lbq;	/* array of control blocks */
 	void __iomem *lbq_prod_idx_db_reg;	/* PCI doorbell mem area + 0x18 */
 	u32 lbq_prod_idx;	/* current sw prod idx */
@@ -1302,6 +1332,11 @@
 	struct napi_struct napi;
 	u8 reserved;
 	struct ql_adapter *qdev;
+	u64 rx_packets;
+	u64 rx_multicast;
+	u64 rx_bytes;
+	u64 rx_dropped;
+	u64 rx_errors;
 };
 
 /*
@@ -1363,6 +1398,174 @@
 	u64 rx_1024_to_1518_pkts;
 	u64 rx_1519_to_max_pkts;
 	u64 rx_len_err_pkts;
+	/*
+	 * These stats come from offset 500h to 5C8h
+	 * in the XGMAC register.
+	 */
+	u64 tx_cbfc_pause_frames0;
+	u64 tx_cbfc_pause_frames1;
+	u64 tx_cbfc_pause_frames2;
+	u64 tx_cbfc_pause_frames3;
+	u64 tx_cbfc_pause_frames4;
+	u64 tx_cbfc_pause_frames5;
+	u64 tx_cbfc_pause_frames6;
+	u64 tx_cbfc_pause_frames7;
+	u64 rx_cbfc_pause_frames0;
+	u64 rx_cbfc_pause_frames1;
+	u64 rx_cbfc_pause_frames2;
+	u64 rx_cbfc_pause_frames3;
+	u64 rx_cbfc_pause_frames4;
+	u64 rx_cbfc_pause_frames5;
+	u64 rx_cbfc_pause_frames6;
+	u64 rx_cbfc_pause_frames7;
+	u64 rx_nic_fifo_drop;
+};
+
+/* Address/Length pairs for the coredump. */
+enum {
+	MPI_CORE_REGS_ADDR = 0x00030000,
+	MPI_CORE_REGS_CNT = 127,
+	MPI_CORE_SH_REGS_CNT = 16,
+	TEST_REGS_ADDR = 0x00001000,
+	TEST_REGS_CNT = 23,
+	RMII_REGS_ADDR = 0x00001040,
+	RMII_REGS_CNT = 64,
+	FCMAC1_REGS_ADDR = 0x00001080,
+	FCMAC2_REGS_ADDR = 0x000010c0,
+	FCMAC_REGS_CNT = 64,
+	FC1_MBX_REGS_ADDR = 0x00001100,
+	FC2_MBX_REGS_ADDR = 0x00001240,
+	FC_MBX_REGS_CNT = 64,
+	IDE_REGS_ADDR = 0x00001140,
+	IDE_REGS_CNT = 64,
+	NIC1_MBX_REGS_ADDR = 0x00001180,
+	NIC2_MBX_REGS_ADDR = 0x00001280,
+	NIC_MBX_REGS_CNT = 64,
+	SMBUS_REGS_ADDR = 0x00001200,
+	SMBUS_REGS_CNT = 64,
+	I2C_REGS_ADDR = 0x00001fc0,
+	I2C_REGS_CNT = 64,
+	MEMC_REGS_ADDR = 0x00003000,
+	MEMC_REGS_CNT = 256,
+	PBUS_REGS_ADDR = 0x00007c00,
+	PBUS_REGS_CNT = 256,
+	MDE_REGS_ADDR = 0x00010000,
+	MDE_REGS_CNT = 6,
+	CODE_RAM_ADDR = 0x00020000,
+	CODE_RAM_CNT = 0x2000,
+	MEMC_RAM_ADDR = 0x00100000,
+	MEMC_RAM_CNT = 0x2000,
+};
+
+#define MPI_COREDUMP_COOKIE 0x5555aaaa
+struct mpi_coredump_global_header {
+	u32	cookie;
+	u8	idString[16];
+	u32	timeLo;
+	u32	timeHi;
+	u32	imageSize;
+	u32	headerSize;
+	u8	info[220];
+};
+
+struct mpi_coredump_segment_header {
+	u32	cookie;
+	u32	segNum;
+	u32	segSize;
+	u32	extra;
+	u8	description[16];
+};
+
+/* Reg dump segment numbers. */
+enum {
+	CORE_SEG_NUM = 1,
+	TEST_LOGIC_SEG_NUM = 2,
+	RMII_SEG_NUM = 3,
+	FCMAC1_SEG_NUM = 4,
+	FCMAC2_SEG_NUM = 5,
+	FC1_MBOX_SEG_NUM = 6,
+	IDE_SEG_NUM = 7,
+	NIC1_MBOX_SEG_NUM = 8,
+	SMBUS_SEG_NUM = 9,
+	FC2_MBOX_SEG_NUM = 10,
+	NIC2_MBOX_SEG_NUM = 11,
+	I2C_SEG_NUM = 12,
+	MEMC_SEG_NUM = 13,
+	PBUS_SEG_NUM = 14,
+	MDE_SEG_NUM = 15,
+	NIC1_CONTROL_SEG_NUM = 16,
+	NIC2_CONTROL_SEG_NUM = 17,
+	NIC1_XGMAC_SEG_NUM = 18,
+	NIC2_XGMAC_SEG_NUM = 19,
+	WCS_RAM_SEG_NUM = 20,
+	MEMC_RAM_SEG_NUM = 21,
+	XAUI_AN_SEG_NUM = 22,
+	XAUI_HSS_PCS_SEG_NUM = 23,
+	XFI_AN_SEG_NUM = 24,
+	XFI_TRAIN_SEG_NUM = 25,
+	XFI_HSS_PCS_SEG_NUM = 26,
+	XFI_HSS_TX_SEG_NUM = 27,
+	XFI_HSS_RX_SEG_NUM = 28,
+	XFI_HSS_PLL_SEG_NUM = 29,
+	MISC_NIC_INFO_SEG_NUM = 30,
+	INTR_STATES_SEG_NUM = 31,
+	CAM_ENTRIES_SEG_NUM = 32,
+	ROUTING_WORDS_SEG_NUM = 33,
+	ETS_SEG_NUM = 34,
+	PROBE_DUMP_SEG_NUM = 35,
+	ROUTING_INDEX_SEG_NUM = 36,
+	MAC_PROTOCOL_SEG_NUM = 37,
+	XAUI2_AN_SEG_NUM = 38,
+	XAUI2_HSS_PCS_SEG_NUM = 39,
+	XFI2_AN_SEG_NUM = 40,
+	XFI2_TRAIN_SEG_NUM = 41,
+	XFI2_HSS_PCS_SEG_NUM = 42,
+	XFI2_HSS_TX_SEG_NUM = 43,
+	XFI2_HSS_RX_SEG_NUM = 44,
+	XFI2_HSS_PLL_SEG_NUM = 45,
+	SEM_REGS_SEG_NUM = 50
+
+};
+
+struct ql_nic_misc {
+	u32 rx_ring_count;
+	u32 tx_ring_count;
+	u32 intr_count;
+	u32 function;
+};
+
+struct ql_reg_dump {
+
+	/* segment 0 */
+	struct mpi_coredump_global_header mpi_global_header;
+
+	/* segment 16 */
+	struct mpi_coredump_segment_header nic_regs_seg_hdr;
+	u32 nic_regs[64];
+
+	/* segment 30 */
+	struct mpi_coredump_segment_header misc_nic_seg_hdr;
+	struct ql_nic_misc misc_nic_info;
+
+	/* segment 31 */
+	/* one interrupt state for each CQ */
+	struct mpi_coredump_segment_header intr_states_seg_hdr;
+	u32 intr_states[MAX_CPUS];
+
+	/* segment 32 */
+	/* 3 cam words each for 16 unicast,
+	 * 2 cam words for each of 32 multicast.
+	 */
+	struct mpi_coredump_segment_header cam_entries_seg_hdr;
+	u32 cam_entries[(16 * 3) + (32 * 3)];
+
+	/* segment 33 */
+	struct mpi_coredump_segment_header nic_routing_words_seg_hdr;
+	u32 nic_routing_words[16];
+
+	/* segment 34 */
+	struct mpi_coredump_segment_header ets_seg_hdr;
+	u32 ets[8+2];
 };
 
 /*
@@ -1398,6 +1601,8 @@
 	QL_ALLMULTI = 6,
 	QL_PORT_CFG = 7,
 	QL_CAM_RT_SET = 8,
+	QL_SELFTEST = 9,
+	QL_LB_LINK_UP = 10,
 };
 
 /* link_status bit definitions */
@@ -1505,6 +1710,7 @@
 
 	struct rx_ring rx_ring[MAX_RX_RINGS];
 	struct tx_ring tx_ring[MAX_TX_RINGS];
+	unsigned int lbq_buf_order;
 
 	int rx_csum;
 	u32 default_rx_queue;
@@ -1519,11 +1725,11 @@
 	u32 port_init;
 	u32 link_status;
 	u32 link_config;
+	u32 led_config;
 	u32 max_frame_size;
 
 	union flash_params flash;
 
-	struct net_device_stats stats;
 	struct workqueue_struct *workqueue;
 	struct delayed_work asic_reset_work;
 	struct delayed_work mpi_reset_work;
@@ -1533,6 +1739,7 @@
 	struct completion ide_completion;
 	struct nic_operations *nic_ops;
 	u16 device_id;
+	atomic_t lb_count;
 };
 
 /*
@@ -1611,10 +1818,22 @@
 int ql_cam_route_initialize(struct ql_adapter *qdev);
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
+int ql_wol(struct ql_adapter *qdev);
+int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol);
+int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol);
+int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config);
+int ql_mb_get_led_cfg(struct ql_adapter *qdev);
 void ql_link_on(struct ql_adapter *qdev);
 void ql_link_off(struct ql_adapter *qdev);
 int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_mb_get_port_cfg(struct ql_adapter *qdev);
+int ql_mb_set_port_cfg(struct ql_adapter *qdev);
 int ql_wait_fifo_empty(struct ql_adapter *qdev);
+void ql_gen_reg_dump(struct ql_adapter *qdev,
+			struct ql_reg_dump *mpi_coredump);
+netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev);
+void ql_check_lb_frame(struct ql_adapter *, struct sk_buff *);
+int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index aa88cb3..9f58c47 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -1,5 +1,185 @@
 #include "qlge.h"
 
+
+static int ql_get_ets_regs(struct ql_adapter *qdev, u32 * buf)
+{
+	int status = 0;
+	int i;
+
+	for (i = 0; i < 8; i++, buf++) {
+		ql_write32(qdev, NIC_ETS, i << 29 | 0x08000000);
+		*buf = ql_read32(qdev, NIC_ETS);
+	}
+
+	for (i = 0; i < 2; i++, buf++) {
+		ql_write32(qdev, CNA_ETS, i << 29 | 0x08000000);
+		*buf = ql_read32(qdev, CNA_ETS);
+	}
+
+	return status;
+}
+
+static void ql_get_intr_states(struct ql_adapter *qdev, u32 * buf)
+{
+	int i;
+
+	for (i = 0; i < qdev->rx_ring_count; i++, buf++) {
+		ql_write32(qdev, INTR_EN,
+				qdev->intr_context[i].intr_read_mask);
+		*buf = ql_read32(qdev, INTR_EN);
+	}
+}
+
+static int ql_get_cam_entries(struct ql_adapter *qdev, u32 * buf)
+{
+	int i, status;
+	u32 value[3];
+
+	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+
+	for (i = 0; i < 16; i++) {
+		status = ql_get_mac_addr_reg(qdev,
+					MAC_ADDR_TYPE_CAM_MAC, i, value);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+				"Failed read of mac index register.\n");
+			goto err;
+		}
+		*buf++ = value[0];	/* lower MAC address */
+		*buf++ = value[1];	/* upper MAC address */
+		*buf++ = value[2];	/* output */
+	}
+	for (i = 0; i < 32; i++) {
+		status = ql_get_mac_addr_reg(qdev,
+					MAC_ADDR_TYPE_MULTI_MAC, i, value);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+				"Failed read of mac index register.\n");
+			goto err;
+		}
+		*buf++ = value[0];	/* lower Mcast address */
+		*buf++ = value[1];	/* upper Mcast address */
+	}
+err:
+	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	return status;
+}
+
+static int ql_get_routing_entries(struct ql_adapter *qdev, u32 * buf)
+{
+	int status;
+	u32 value, i;
+
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	for (i = 0; i < 16; i++) {
+		status = ql_get_routing_reg(qdev, i, &value);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+				"Failed read of routing index register.\n");
+			goto err;
+		} else {
+			*buf++ = value;
+		}
+	}
+err:
+	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Create a coredump segment header */
+static void ql_build_coredump_seg_header(
+		struct mpi_coredump_segment_header *seg_hdr,
+		u32 seg_number, u32 seg_size, u8 *desc)
+{
+	memset(seg_hdr, 0, sizeof(struct mpi_coredump_segment_header));
+	seg_hdr->cookie = MPI_COREDUMP_COOKIE;
+	seg_hdr->segNum = seg_number;
+	seg_hdr->segSize = seg_size;
+	memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
+}
+
+void ql_gen_reg_dump(struct ql_adapter *qdev,
+			struct ql_reg_dump *mpi_coredump)
+{
+	int i, status;
+
+
+	memset(&(mpi_coredump->mpi_global_header), 0,
+		sizeof(struct mpi_coredump_global_header));
+	mpi_coredump->mpi_global_header.cookie = MPI_COREDUMP_COOKIE;
+	mpi_coredump->mpi_global_header.headerSize =
+		sizeof(struct mpi_coredump_global_header);
+	mpi_coredump->mpi_global_header.imageSize =
+		sizeof(struct ql_reg_dump);
+	memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+		sizeof(mpi_coredump->mpi_global_header.idString));
+
+
+	/* segment 16 */
+	ql_build_coredump_seg_header(&mpi_coredump->misc_nic_seg_hdr,
+				MISC_NIC_INFO_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->misc_nic_info),
+				"MISC NIC INFO");
+	mpi_coredump->misc_nic_info.rx_ring_count = qdev->rx_ring_count;
+	mpi_coredump->misc_nic_info.tx_ring_count = qdev->tx_ring_count;
+	mpi_coredump->misc_nic_info.intr_count = qdev->intr_count;
+	mpi_coredump->misc_nic_info.function = qdev->func;
+
+	/* Segment 16, Rev C. Step 18 */
+	ql_build_coredump_seg_header(&mpi_coredump->nic_regs_seg_hdr,
+				NIC1_CONTROL_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic_regs),
+				"NIC Registers");
+	/* Get generic reg dump */
+	for (i = 0; i < 64; i++)
+		mpi_coredump->nic_regs[i] = ql_read32(qdev, i * sizeof(u32));
+
+	/* Segment 31 */
+	/* Get indexed register values. */
+	ql_build_coredump_seg_header(&mpi_coredump->intr_states_seg_hdr,
+				INTR_STATES_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->intr_states),
+				"INTR States");
+	ql_get_intr_states(qdev, &mpi_coredump->intr_states[0]);
+
+	ql_build_coredump_seg_header(&mpi_coredump->cam_entries_seg_hdr,
+				CAM_ENTRIES_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->cam_entries),
+				"CAM Entries");
+	status = ql_get_cam_entries(qdev, &mpi_coredump->cam_entries[0]);
+	if (status)
+		return;
+
+	ql_build_coredump_seg_header(&mpi_coredump->nic_routing_words_seg_hdr,
+				ROUTING_WORDS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic_routing_words),
+				"Routing Words");
+	status = ql_get_routing_entries(qdev,
+			 &mpi_coredump->nic_routing_words[0]);
+	if (status)
+		return;
+
+	/* Segment 34 (Rev C. step 23) */
+	ql_build_coredump_seg_header(&mpi_coredump->ets_seg_hdr,
+				ETS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->ets),
+				"ETS Registers");
+	status = ql_get_ets_regs(qdev, &mpi_coredump->ets[0]);
+	if (status)
+		return;
+}
+
 #ifdef QL_REG_DUMP
 static void ql_dump_intr_states(struct ql_adapter *qdev)
 {
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 5207394..058fa0a 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -36,6 +36,11 @@
 
 #include "qlge.h"
 
+static const char ql_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Loopback test  (offline)"
+};
+#define QLGE_TEST_LEN (sizeof(ql_gstrings_test) / ETH_GSTRING_LEN)
+
 static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 {
 	int i, status = 0;
@@ -132,6 +137,41 @@
 		iter++;
 	}
 
+	/*
+	 * Get Per-priority TX pause frame counter statistics.
+	 */
+	for (i = 0x500; i < 0x540; i += 8) {
+		if (ql_read_xgmac_reg64(qdev, i, &data)) {
+			QPRINTK(qdev, DRV, ERR,
+				"Error reading status register 0x%.04x.\n", i);
+			goto end;
+		} else
+			*iter = data;
+		iter++;
+	}
+
+	/*
+	 * Get Per-priority RX pause frame counter statistics.
+	 */
+	for (i = 0x568; i < 0x5a8; i += 8) {
+		if (ql_read_xgmac_reg64(qdev, i, &data)) {
+			QPRINTK(qdev, DRV, ERR,
+				"Error reading status register 0x%.04x.\n", i);
+			goto end;
+		} else
+			*iter = data;
+		iter++;
+	}
+
+	/*
+	 * Get RX NIC FIFO DROP statistics.
+	 */
+	if (ql_read_xgmac_reg64(qdev, 0x5b8, &data)) {
+		QPRINTK(qdev, DRV, ERR,
+			"Error reading status register 0x%.04x.\n", i);
+		goto end;
+	} else
+		*iter = data;
 end:
 	ql_sem_unlock(qdev, qdev->xg_sem_mask);
 quit:
@@ -185,6 +225,23 @@
 	{"rx_1024_to_1518_pkts"},
 	{"rx_1519_to_max_pkts"},
 	{"rx_len_err_pkts"},
+	{"tx_cbfc_pause_frames0"},
+	{"tx_cbfc_pause_frames1"},
+	{"tx_cbfc_pause_frames2"},
+	{"tx_cbfc_pause_frames3"},
+	{"tx_cbfc_pause_frames4"},
+	{"tx_cbfc_pause_frames5"},
+	{"tx_cbfc_pause_frames6"},
+	{"tx_cbfc_pause_frames7"},
+	{"rx_cbfc_pause_frames0"},
+	{"rx_cbfc_pause_frames1"},
+	{"rx_cbfc_pause_frames2"},
+	{"rx_cbfc_pause_frames3"},
+	{"rx_cbfc_pause_frames4"},
+	{"rx_cbfc_pause_frames5"},
+	{"rx_cbfc_pause_frames6"},
+	{"rx_cbfc_pause_frames7"},
+	{"rx_nic_fifo_drop"},
 };
 
 static void ql_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
@@ -199,6 +256,8 @@
 static int ql_get_sset_count(struct net_device *dev, int sset)
 {
 	switch (sset) {
+	case ETH_SS_TEST:
+		return QLGE_TEST_LEN;
 	case ETH_SS_STATS:
 		return ARRAY_SIZE(ql_stats_str_arr);
 	default:
@@ -257,6 +316,23 @@
 	*data++ = s->rx_1024_to_1518_pkts;
 	*data++ = s->rx_1519_to_max_pkts;
 	*data++ = s->rx_len_err_pkts;
+	*data++ = s->tx_cbfc_pause_frames0;
+	*data++ = s->tx_cbfc_pause_frames1;
+	*data++ = s->tx_cbfc_pause_frames2;
+	*data++ = s->tx_cbfc_pause_frames3;
+	*data++ = s->tx_cbfc_pause_frames4;
+	*data++ = s->tx_cbfc_pause_frames5;
+	*data++ = s->tx_cbfc_pause_frames6;
+	*data++ = s->tx_cbfc_pause_frames7;
+	*data++ = s->rx_cbfc_pause_frames0;
+	*data++ = s->rx_cbfc_pause_frames1;
+	*data++ = s->rx_cbfc_pause_frames2;
+	*data++ = s->rx_cbfc_pause_frames3;
+	*data++ = s->rx_cbfc_pause_frames4;
+	*data++ = s->rx_cbfc_pause_frames5;
+	*data++ = s->rx_cbfc_pause_frames6;
+	*data++ = s->rx_cbfc_pause_frames7;
+	*data++ = s->rx_nic_fifo_drop;
 }
 
 static int ql_get_settings(struct net_device *ndev,
@@ -302,6 +378,181 @@
 	drvinfo->eedump_len = 0;
 }
 
+static void ql_get_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	/* What we support. */
+	wol->supported = WAKE_MAGIC;
+	/* What we've currently got set. */
+	wol->wolopts = qdev->wol;
+}
+
+static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	int status;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+	qdev->wol = wol->wolopts;
+
+	QPRINTK(qdev, DRV, INFO, "Set wol option 0x%x on %s\n",
+			 qdev->wol, ndev->name);
+	if (!qdev->wol) {
+		u32 wol = 0;
+		status = ql_mb_wol_mode(qdev, wol);
+		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
+			(status == 0) ? "cleared sucessfully" : "clear failed",
+			wol, qdev->ndev->name);
+	}
+
+	return 0;
+}
+
+static int ql_phys_id(struct net_device *ndev, u32 data)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	u32 led_reg, i;
+	int status;
+
+	/* Save the current LED settings */
+	status = ql_mb_get_led_cfg(qdev);
+	if (status)
+		return status;
+	led_reg = qdev->led_config;
+
+	/* Start blinking the led */
+	if (!data || data > 300)
+		data = 300;
+
+	for (i = 0; i < (data * 10); i++)
+		ql_mb_set_led_cfg(qdev, QL_LED_BLINK);
+
+	/* Restore LED settings */
+	status = ql_mb_set_led_cfg(qdev, led_reg);
+	if (status)
+		return status;
+
+	return 0;
+}
+
+static int ql_start_loopback(struct ql_adapter *qdev)
+{
+	if (netif_carrier_ok(qdev->ndev)) {
+		set_bit(QL_LB_LINK_UP, &qdev->flags);
+		netif_carrier_off(qdev->ndev);
+	} else
+		clear_bit(QL_LB_LINK_UP, &qdev->flags);
+	qdev->link_config |= CFG_LOOPBACK_PCS;
+	return ql_mb_set_port_cfg(qdev);
+}
+
+static void ql_stop_loopback(struct ql_adapter *qdev)
+{
+	qdev->link_config &= ~CFG_LOOPBACK_PCS;
+	ql_mb_set_port_cfg(qdev);
+	if (test_bit(QL_LB_LINK_UP, &qdev->flags)) {
+		netif_carrier_on(qdev->ndev);
+		clear_bit(QL_LB_LINK_UP, &qdev->flags);
+	}
+}
+
+static void ql_create_lb_frame(struct sk_buff *skb,
+					unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size &= ~1;
+	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+void ql_check_lb_frame(struct ql_adapter *qdev,
+					struct sk_buff *skb)
+{
+	unsigned int frame_size = skb->len;
+
+	if ((*(skb->data + 3) == 0xFF) &&
+		(*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+		(*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+			atomic_dec(&qdev->lb_count);
+			return;
+	}
+}
+
+static int ql_run_loopback_test(struct ql_adapter *qdev)
+{
+	int i;
+	netdev_tx_t rc;
+	struct sk_buff *skb;
+	unsigned int size = SMALL_BUF_MAP_SIZE;
+
+	for (i = 0; i < 64; i++) {
+		skb = netdev_alloc_skb(qdev->ndev, size);
+		if (!skb)
+			return -ENOMEM;
+
+		skb->queue_mapping = 0;
+		skb_put(skb, size);
+		ql_create_lb_frame(skb, size);
+		rc = ql_lb_send(skb, qdev->ndev);
+		if (rc != NETDEV_TX_OK)
+			return -EPIPE;
+		atomic_inc(&qdev->lb_count);
+	}
+
+	ql_clean_lb_rx_ring(&qdev->rx_ring[0], 128);
+	return atomic_read(&qdev->lb_count) ? -EIO : 0;
+}
+
+static int ql_loopback_test(struct ql_adapter *qdev, u64 *data)
+{
+	*data = ql_start_loopback(qdev);
+	if (*data)
+		goto out;
+	*data = ql_run_loopback_test(qdev);
+out:
+	ql_stop_loopback(qdev);
+	return *data;
+}
+
+static void ql_self_test(struct net_device *ndev,
+				struct ethtool_test *eth_test, u64 *data)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		set_bit(QL_SELFTEST, &qdev->flags);
+		if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+			/* Offline tests */
+			if (ql_loopback_test(qdev, &data[0]))
+				eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		} else {
+			/* Online tests */
+			data[0] = 0;
+		}
+		clear_bit(QL_SELFTEST, &qdev->flags);
+	} else {
+		QPRINTK(qdev, DRV, ERR,
+			"%s: is down, Loopback test will fail.\n", ndev->name);
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+	}
+}
+
+static int ql_get_regs_len(struct net_device *ndev)
+{
+	return sizeof(struct ql_reg_dump);
+}
+
+static void ql_get_regs(struct net_device *ndev,
+			struct ethtool_regs *regs, void *p)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+
+	ql_gen_reg_dump(qdev, p);
+}
+
 static int ql_get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
 {
 	struct ql_adapter *qdev = netdev_priv(dev);
@@ -355,6 +606,37 @@
 	return ql_update_ring_coalescing(qdev);
 }
 
+static void ql_get_pauseparam(struct net_device *netdev,
+			struct ethtool_pauseparam *pause)
+{
+	struct ql_adapter *qdev = netdev_priv(netdev);
+
+	ql_mb_get_port_cfg(qdev);
+	if (qdev->link_config & CFG_PAUSE_STD) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int ql_set_pauseparam(struct net_device *netdev,
+			struct ethtool_pauseparam *pause)
+{
+	struct ql_adapter *qdev = netdev_priv(netdev);
+	int status = 0;
+
+	if ((pause->rx_pause) && (pause->tx_pause))
+		qdev->link_config |= CFG_PAUSE_STD;
+	else if (!pause->rx_pause && !pause->tx_pause)
+		qdev->link_config &= ~CFG_PAUSE_STD;
+	else
+		return -EINVAL;
+
+	status = ql_mb_set_port_cfg(qdev);
+	if (status)
+		return status;
+	return status;
+}
+
 static u32 ql_get_rx_csum(struct net_device *netdev)
 {
 	struct ql_adapter *qdev = netdev_priv(netdev);
@@ -396,9 +678,17 @@
 const struct ethtool_ops qlge_ethtool_ops = {
 	.get_settings = ql_get_settings,
 	.get_drvinfo = ql_get_drvinfo,
+	.get_wol = ql_get_wol,
+	.set_wol = ql_set_wol,
+	.get_regs_len	= ql_get_regs_len,
+	.get_regs = ql_get_regs,
 	.get_msglevel = ql_get_msglevel,
 	.set_msglevel = ql_set_msglevel,
 	.get_link = ethtool_op_get_link,
+	.phys_id		 = ql_phys_id,
+	.self_test		 = ql_self_test,
+	.get_pauseparam		 = ql_get_pauseparam,
+	.set_pauseparam		 = ql_set_pauseparam,
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index a2fc70a..707b391 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -69,9 +69,9 @@
 #define MSIX_IRQ 0
 #define MSI_IRQ 1
 #define LEG_IRQ 2
-static int irq_type = MSIX_IRQ;
-module_param(irq_type, int, MSIX_IRQ);
-MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
+static int qlge_irq_type = MSIX_IRQ;
+module_param(qlge_irq_type, int, MSIX_IRQ);
+MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID_8012)},
@@ -1025,6 +1025,11 @@
 	return status;
 }
 
+static inline unsigned int ql_lbq_block_size(struct ql_adapter *qdev)
+{
+	return PAGE_SIZE << qdev->lbq_buf_order;
+}
+
 /* Get the next large buffer. */
 static struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring)
 {
@@ -1036,6 +1041,28 @@
 	return lbq_desc;
 }
 
+static struct bq_desc *ql_get_curr_lchunk(struct ql_adapter *qdev,
+		struct rx_ring *rx_ring)
+{
+	struct bq_desc *lbq_desc = ql_get_curr_lbuf(rx_ring);
+
+	pci_dma_sync_single_for_cpu(qdev->pdev,
+					pci_unmap_addr(lbq_desc, mapaddr),
+				    rx_ring->lbq_buf_size,
+					PCI_DMA_FROMDEVICE);
+
+	/* If it's the last chunk of our master page then
+	 * we unmap it.
+	 */
+	if ((lbq_desc->p.pg_chunk.offset + rx_ring->lbq_buf_size)
+					== ql_lbq_block_size(qdev))
+		pci_unmap_page(qdev->pdev,
+				lbq_desc->p.pg_chunk.map,
+				ql_lbq_block_size(qdev),
+				PCI_DMA_FROMDEVICE);
+	return lbq_desc;
+}
+
 /* Get the next small buffer. */
 static struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring)
 {
@@ -1063,6 +1090,53 @@
 	ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg);
 }
 
+static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring,
+						struct bq_desc *lbq_desc)
+{
+	if (!rx_ring->pg_chunk.page) {
+		u64 map;
+		rx_ring->pg_chunk.page = alloc_pages(__GFP_COLD | __GFP_COMP |
+						GFP_ATOMIC,
+						qdev->lbq_buf_order);
+		if (unlikely(!rx_ring->pg_chunk.page)) {
+			QPRINTK(qdev, DRV, ERR,
+				"page allocation failed.\n");
+			return -ENOMEM;
+		}
+		rx_ring->pg_chunk.offset = 0;
+		map = pci_map_page(qdev->pdev, rx_ring->pg_chunk.page,
+					0, ql_lbq_block_size(qdev),
+					PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(qdev->pdev, map)) {
+			__free_pages(rx_ring->pg_chunk.page,
+					qdev->lbq_buf_order);
+			QPRINTK(qdev, DRV, ERR,
+				"PCI mapping failed.\n");
+			return -ENOMEM;
+		}
+		rx_ring->pg_chunk.map = map;
+		rx_ring->pg_chunk.va = page_address(rx_ring->pg_chunk.page);
+	}
+
+	/* Copy the current master pg_chunk info
+	 * to the current descriptor.
+	 */
+	lbq_desc->p.pg_chunk = rx_ring->pg_chunk;
+
+	/* Adjust the master page chunk for next
+	 * buffer get.
+	 */
+	rx_ring->pg_chunk.offset += rx_ring->lbq_buf_size;
+	if (rx_ring->pg_chunk.offset == ql_lbq_block_size(qdev)) {
+		rx_ring->pg_chunk.page = NULL;
+		lbq_desc->p.pg_chunk.last_flag = 1;
+	} else {
+		rx_ring->pg_chunk.va += rx_ring->lbq_buf_size;
+		get_page(rx_ring->pg_chunk.page);
+		lbq_desc->p.pg_chunk.last_flag = 0;
+	}
+	return 0;
+}
 /* Process (refill) a large buffer queue. */
 static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 {
@@ -1072,39 +1146,28 @@
 	u64 map;
 	int i;
 
-	while (rx_ring->lbq_free_cnt > 16) {
+	while (rx_ring->lbq_free_cnt > 32) {
 		for (i = 0; i < 16; i++) {
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"lbq: try cleaning clean_idx = %d.\n",
 				clean_idx);
 			lbq_desc = &rx_ring->lbq[clean_idx];
-			if (lbq_desc->p.lbq_page == NULL) {
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-					"lbq: getting new page for index %d.\n",
-					lbq_desc->index);
-				lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC);
-				if (lbq_desc->p.lbq_page == NULL) {
-					rx_ring->lbq_clean_idx = clean_idx;
-					QPRINTK(qdev, RX_STATUS, ERR,
-						"Couldn't get a page.\n");
+			if (ql_get_next_chunk(qdev, rx_ring, lbq_desc)) {
+				QPRINTK(qdev, IFUP, ERR,
+					"Could not get a page chunk.\n");
 					return;
 				}
-				map = pci_map_page(qdev->pdev,
-						   lbq_desc->p.lbq_page,
-						   0, PAGE_SIZE,
-						   PCI_DMA_FROMDEVICE);
-				if (pci_dma_mapping_error(qdev->pdev, map)) {
-					rx_ring->lbq_clean_idx = clean_idx;
-					put_page(lbq_desc->p.lbq_page);
-					lbq_desc->p.lbq_page = NULL;
-					QPRINTK(qdev, RX_STATUS, ERR,
-						"PCI mapping failed.\n");
-					return;
-				}
+
+			map = lbq_desc->p.pg_chunk.map +
+				lbq_desc->p.pg_chunk.offset;
 				pci_unmap_addr_set(lbq_desc, mapaddr, map);
-				pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE);
+			pci_unmap_len_set(lbq_desc, maplen,
+					rx_ring->lbq_buf_size);
 				*lbq_desc->addr = cpu_to_le64(map);
-			}
+
+			pci_dma_sync_single_for_device(qdev->pdev, map,
+						rx_ring->lbq_buf_size,
+						PCI_DMA_FROMDEVICE);
 			clean_idx++;
 			if (clean_idx == rx_ring->lbq_len)
 				clean_idx = 0;
@@ -1147,7 +1210,7 @@
 					sbq_desc->index);
 				sbq_desc->p.skb =
 				    netdev_alloc_skb(qdev->ndev,
-						     rx_ring->sbq_buf_size);
+						     SMALL_BUFFER_SIZE);
 				if (sbq_desc->p.skb == NULL) {
 					QPRINTK(qdev, PROBE, ERR,
 						"Couldn't get an skb.\n");
@@ -1157,8 +1220,8 @@
 				skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD);
 				map = pci_map_single(qdev->pdev,
 						     sbq_desc->p.skb->data,
-						     rx_ring->sbq_buf_size /
-						     2, PCI_DMA_FROMDEVICE);
+						     rx_ring->sbq_buf_size,
+						     PCI_DMA_FROMDEVICE);
 				if (pci_dma_mapping_error(qdev->pdev, map)) {
 					QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n");
 					rx_ring->sbq_clean_idx = clean_idx;
@@ -1168,7 +1231,7 @@
 				}
 				pci_unmap_addr_set(sbq_desc, mapaddr, map);
 				pci_unmap_len_set(sbq_desc, maplen,
-						  rx_ring->sbq_buf_size / 2);
+						  rx_ring->sbq_buf_size);
 				*sbq_desc->addr = cpu_to_le64(map);
 			}
 
@@ -1480,27 +1543,24 @@
 			 * chain it to the header buffer's skb and let
 			 * it rip.
 			 */
-			lbq_desc = ql_get_curr_lbuf(rx_ring);
-			pci_unmap_page(qdev->pdev,
-				       pci_unmap_addr(lbq_desc,
-						      mapaddr),
-				       pci_unmap_len(lbq_desc, maplen),
-				       PCI_DMA_FROMDEVICE);
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
 			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Chaining page to skb.\n");
-			skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page,
-					   0, length);
+				"Chaining page at offset = %d,"
+				"for %d bytes  to skb.\n",
+				lbq_desc->p.pg_chunk.offset, length);
+			skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
+						lbq_desc->p.pg_chunk.offset,
+						length);
 			skb->len += length;
 			skb->data_len += length;
 			skb->truesize += length;
-			lbq_desc->p.lbq_page = NULL;
 		} else {
 			/*
 			 * The headers and data are in a single large buffer. We
 			 * copy it to a new skb and let it go. This can happen with
 			 * jumbo mtu on a non-TCP/UDP frame.
 			 */
-			lbq_desc = ql_get_curr_lbuf(rx_ring);
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
 			skb = netdev_alloc_skb(qdev->ndev, length);
 			if (skb == NULL) {
 				QPRINTK(qdev, PROBE, DEBUG,
@@ -1515,13 +1575,14 @@
 			skb_reserve(skb, NET_IP_ALIGN);
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"%d bytes of headers and data in large. Chain page to new skb and pull tail.\n", length);
-			skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page,
-					   0, length);
+			skb_fill_page_desc(skb, 0,
+						lbq_desc->p.pg_chunk.page,
+						lbq_desc->p.pg_chunk.offset,
+						length);
 			skb->len += length;
 			skb->data_len += length;
 			skb->truesize += length;
 			length -= length;
-			lbq_desc->p.lbq_page = NULL;
 			__pskb_pull_tail(skb,
 				(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
 				VLAN_ETH_HLEN : ETH_HLEN);
@@ -1538,8 +1599,7 @@
 		 *         frames.  If the MTU goes up we could
 		 *          eventually be in trouble.
 		 */
-		int size, offset, i = 0;
-		__le64 *bq, bq_array[8];
+		int size, i = 0;
 		sbq_desc = ql_get_curr_sbuf(rx_ring);
 		pci_unmap_single(qdev->pdev,
 				 pci_unmap_addr(sbq_desc, mapaddr),
@@ -1558,37 +1618,25 @@
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"%d bytes of headers & data in chain of large.\n", length);
 			skb = sbq_desc->p.skb;
-			bq = &bq_array[0];
-			memcpy(bq, skb->data, sizeof(bq_array));
 			sbq_desc->p.skb = NULL;
 			skb_reserve(skb, NET_IP_ALIGN);
-		} else {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Headers in small, %d bytes of data in chain of large.\n", length);
-			bq = (__le64 *)sbq_desc->p.skb->data;
 		}
 		while (length > 0) {
-			lbq_desc = ql_get_curr_lbuf(rx_ring);
-			pci_unmap_page(qdev->pdev,
-				       pci_unmap_addr(lbq_desc,
-						      mapaddr),
-				       pci_unmap_len(lbq_desc,
-						     maplen),
-				       PCI_DMA_FROMDEVICE);
-			size = (length < PAGE_SIZE) ? length : PAGE_SIZE;
-			offset = 0;
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
+			size = (length < rx_ring->lbq_buf_size) ? length :
+				rx_ring->lbq_buf_size;
 
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"Adding page %d to skb for %d bytes.\n",
 				i, size);
-			skb_fill_page_desc(skb, i, lbq_desc->p.lbq_page,
-					   offset, size);
+			skb_fill_page_desc(skb, i,
+						lbq_desc->p.pg_chunk.page,
+						lbq_desc->p.pg_chunk.offset,
+						size);
 			skb->len += size;
 			skb->data_len += size;
 			skb->truesize += size;
 			length -= size;
-			lbq_desc->p.lbq_page = NULL;
-			bq++;
 			i++;
 		}
 		__pskb_pull_tail(skb, (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
@@ -1613,6 +1661,7 @@
 	if (unlikely(!skb)) {
 		QPRINTK(qdev, RX_STATUS, DEBUG,
 			"No skb available, drop packet.\n");
+		rx_ring->rx_dropped++;
 		return;
 	}
 
@@ -1621,6 +1670,7 @@
 		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
 					ib_mac_rsp->flags2);
 		dev_kfree_skb_any(skb);
+		rx_ring->rx_errors++;
 		return;
 	}
 
@@ -1629,6 +1679,14 @@
 	 */
 	if (skb->len > ndev->mtu + ETH_HLEN) {
 		dev_kfree_skb_any(skb);
+		rx_ring->rx_dropped++;
+		return;
+	}
+
+	/* loopback self test for ethtool */
+	if (test_bit(QL_SELFTEST, &qdev->flags)) {
+		ql_check_lb_frame(qdev, skb);
+		dev_kfree_skb_any(skb);
 		return;
 	}
 
@@ -1642,6 +1700,7 @@
 			IB_MAC_IOCB_RSP_M_REG ? "Registered" : "",
 			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
 			IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+		rx_ring->rx_multicast++;
 	}
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
 		QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
@@ -1673,8 +1732,8 @@
 		}
 	}
 
-	qdev->stats.rx_packets++;
-	qdev->stats.rx_bytes += skb->len;
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
 	skb_record_rx_queue(skb, rx_ring->cq_id);
 	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
 		if (qdev->vlgrp &&
@@ -1705,8 +1764,8 @@
 	tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
 	tx_ring_desc = &tx_ring->q[mac_rsp->tid];
 	ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
-	qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
-	qdev->stats.tx_packets++;
+	tx_ring->tx_bytes += (tx_ring_desc->skb)->len;
+	tx_ring->tx_packets++;
 	dev_kfree_skb(tx_ring_desc->skb);
 	tx_ring_desc->skb = NULL;
 
@@ -1929,7 +1988,7 @@
 	return work_done;
 }
 
-static void ql_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
+static void qlge_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 
@@ -1945,7 +2004,7 @@
 	}
 }
 
-static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
+static void qlge_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	u32 enable_bit = MAC_ADDR_E;
@@ -1961,7 +2020,7 @@
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 }
 
-static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
+static void qlge_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	u32 enable_bit = 0;
@@ -2046,12 +2105,12 @@
 	 */
 	var = ql_read32(qdev, ISR1);
 	if (var & intr_context->irq_mask) {
-				QPRINTK(qdev, INTR, INFO,
+		QPRINTK(qdev, INTR, INFO,
 			"Waking handler for rx_ring[0].\n");
 		ql_disable_completion_interrupt(qdev, intr_context->intr);
-					napi_schedule(&rx_ring->napi);
-				work_done++;
-			}
+		napi_schedule(&rx_ring->napi);
+		work_done++;
+	}
 	ql_enable_completion_interrupt(qdev, intr_context->intr);
 	return work_done ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -2149,6 +2208,7 @@
 			__func__, tx_ring_idx);
 		netif_stop_subqueue(ndev, tx_ring->wq_id);
 		atomic_inc(&tx_ring->queue_stopped);
+		tx_ring->tx_errors++;
 		return NETDEV_TX_BUSY;
 	}
 	tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
@@ -2183,6 +2243,7 @@
 			NETDEV_TX_OK) {
 		QPRINTK(qdev, TX_QUEUED, ERR,
 				"Could not map the segments.\n");
+		tx_ring->tx_errors++;
 		return NETDEV_TX_BUSY;
 	}
 	QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr);
@@ -2199,6 +2260,7 @@
 	return NETDEV_TX_OK;
 }
 
+
 static void ql_free_shadow_space(struct ql_adapter *qdev)
 {
 	if (qdev->rx_ring_shadow_reg_area) {
@@ -2285,8 +2347,8 @@
 	    pci_alloc_consistent(qdev->pdev, tx_ring->wq_size,
 				 &tx_ring->wq_base_dma);
 
-	if ((tx_ring->wq_base == NULL)
-		|| tx_ring->wq_base_dma & WQ_ADDR_ALIGN) {
+	if ((tx_ring->wq_base == NULL) ||
+	    tx_ring->wq_base_dma & WQ_ADDR_ALIGN) {
 		QPRINTK(qdev, IFUP, ERR, "tx_ring alloc failed.\n");
 		return -ENOMEM;
 	}
@@ -2304,20 +2366,29 @@
 
 static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 {
-	int i;
 	struct bq_desc *lbq_desc;
 
-	for (i = 0; i < rx_ring->lbq_len; i++) {
-		lbq_desc = &rx_ring->lbq[i];
-		if (lbq_desc->p.lbq_page) {
-			pci_unmap_page(qdev->pdev,
-				       pci_unmap_addr(lbq_desc, mapaddr),
-				       pci_unmap_len(lbq_desc, maplen),
-				       PCI_DMA_FROMDEVICE);
+	uint32_t  curr_idx, clean_idx;
 
-			put_page(lbq_desc->p.lbq_page);
-			lbq_desc->p.lbq_page = NULL;
+	curr_idx = rx_ring->lbq_curr_idx;
+	clean_idx = rx_ring->lbq_clean_idx;
+	while (curr_idx != clean_idx) {
+		lbq_desc = &rx_ring->lbq[curr_idx];
+
+		if (lbq_desc->p.pg_chunk.last_flag) {
+			pci_unmap_page(qdev->pdev,
+				lbq_desc->p.pg_chunk.map,
+				ql_lbq_block_size(qdev),
+				       PCI_DMA_FROMDEVICE);
+			lbq_desc->p.pg_chunk.last_flag = 0;
 		}
+
+		put_page(lbq_desc->p.pg_chunk.page);
+		lbq_desc->p.pg_chunk.page = NULL;
+
+		if (++curr_idx == rx_ring->lbq_len)
+			curr_idx = 0;
+
 	}
 }
 
@@ -2615,6 +2686,7 @@
 	/* Set up the shadow registers for this ring. */
 	rx_ring->prod_idx_sh_reg = shadow_reg;
 	rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma;
+	*rx_ring->prod_idx_sh_reg = 0;
 	shadow_reg += sizeof(u64);
 	shadow_reg_dma += sizeof(u64);
 	rx_ring->lbq_base_indirect = shadow_reg;
@@ -2692,7 +2764,7 @@
 		cqicb->sbq_addr =
 		    cpu_to_le64(rx_ring->sbq_base_indirect_dma);
 		cqicb->sbq_buf_size =
-		    cpu_to_le16((u16)(rx_ring->sbq_buf_size/2));
+		    cpu_to_le16((u16)(rx_ring->sbq_buf_size));
 		bq_len = (rx_ring->sbq_len == 65536) ? 0 :
 			(u16) rx_ring->sbq_len;
 		cqicb->sbq_len = cpu_to_le16(bq_len);
@@ -2798,7 +2870,7 @@
 	int i, err;
 
 	/* Get the MSIX vectors. */
-	if (irq_type == MSIX_IRQ) {
+	if (qlge_irq_type == MSIX_IRQ) {
 		/* Try to alloc space for the msix struct,
 		 * if it fails then go to MSI/legacy.
 		 */
@@ -2806,7 +2878,7 @@
 					    sizeof(struct msix_entry),
 					    GFP_KERNEL);
 		if (!qdev->msi_x_entry) {
-			irq_type = MSI_IRQ;
+			qlge_irq_type = MSI_IRQ;
 			goto msi;
 		}
 
@@ -2829,7 +2901,7 @@
 			QPRINTK(qdev, IFUP, WARNING,
 				"MSI-X Enable failed, trying MSI.\n");
 			qdev->intr_count = 1;
-			irq_type = MSI_IRQ;
+			qlge_irq_type = MSI_IRQ;
 		} else if (err == 0) {
 			set_bit(QL_MSIX_ENABLED, &qdev->flags);
 			QPRINTK(qdev, IFUP, INFO,
@@ -2840,7 +2912,7 @@
 	}
 msi:
 	qdev->intr_count = 1;
-	if (irq_type == MSI_IRQ) {
+	if (qlge_irq_type == MSI_IRQ) {
 		if (!pci_enable_msi(qdev->pdev)) {
 			set_bit(QL_MSI_ENABLED, &qdev->flags);
 			QPRINTK(qdev, IFUP, INFO,
@@ -2848,7 +2920,7 @@
 			return;
 		}
 	}
-	irq_type = LEG_IRQ;
+	qlge_irq_type = LEG_IRQ;
 	QPRINTK(qdev, IFUP, DEBUG, "Running with legacy interrupts.\n");
 }
 
@@ -3268,7 +3340,7 @@
 	ql_write32(qdev, FSC, mask | value);
 
 	ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
-		min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
+		min(SMALL_BUF_MAP_SIZE, MAX_SPLIT_SIZE));
 
 	/* Set RX packet routing to use port/pci function on which the
 	 * packet arrived on in addition to usual frame routing.
@@ -3276,6 +3348,22 @@
 	 * the same MAC address.
 	 */
 	ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+	/* Reroute all packets to our Interface.
+	 * They may have been routed to MPI firmware
+	 * due to WOL.
+	 */
+	value = ql_read32(qdev, MGMT_RCV_CFG);
+	value &= ~MGMT_RCV_CFG_RM;
+	mask = 0xffff0000;
+
+	/* Sticky reg needs clearing due to WOL. */
+	ql_write32(qdev, MGMT_RCV_CFG, mask);
+	ql_write32(qdev, MGMT_RCV_CFG, mask | value);
+
+	/* Default WOL is enable on Mezz cards */
+	if (qdev->pdev->subsystem_device == 0x0068 ||
+			qdev->pdev->subsystem_device == 0x0180)
+		qdev->wol = WAKE_MAGIC;
 
 	/* Start up the rx queues. */
 	for (i = 0; i < qdev->rx_ring_count; i++) {
@@ -3310,10 +3398,8 @@
 
 	/* Initialize the port and set the max framesize. */
 	status = qdev->nic_ops->port_initialize(qdev);
-       if (status) {
-              QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
-              return status;
-       }
+	if (status)
+		QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
 
 	/* Set up the MAC address and frame routing filter. */
 	status = ql_cam_route_initialize(qdev);
@@ -3392,6 +3478,52 @@
 	QPRINTK(qdev, PROBE, INFO, "MAC address %pM\n", ndev->dev_addr);
 }
 
+int ql_wol(struct ql_adapter *qdev)
+{
+	int status = 0;
+	u32 wol = MB_WOL_DISABLE;
+
+	/* The CAM is still intact after a reset, but if we
+	 * are doing WOL, then we may need to program the
+	 * routing regs. We would also need to issue the mailbox
+	 * commands to instruct the MPI what to do per the ethtool
+	 * settings.
+	 */
+
+	if (qdev->wol & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY | WAKE_UCAST |
+			WAKE_MCAST | WAKE_BCAST)) {
+		QPRINTK(qdev, IFDOWN, ERR,
+			"Unsupported WOL paramter. qdev->wol = 0x%x.\n",
+			qdev->wol);
+		return -EINVAL;
+	}
+
+	if (qdev->wol & WAKE_MAGIC) {
+		status = ql_mb_wol_set_magic(qdev, 1);
+		if (status) {
+			QPRINTK(qdev, IFDOWN, ERR,
+				"Failed to set magic packet on %s.\n",
+				qdev->ndev->name);
+			return status;
+		} else
+			QPRINTK(qdev, DRV, INFO,
+				"Enabled magic packet successfully on %s.\n",
+				qdev->ndev->name);
+
+		wol |= MB_WOL_MAGIC_PKT;
+	}
+
+	if (qdev->wol) {
+		wol |= MB_WOL_MODE_ON;
+		status = ql_mb_wol_mode(qdev, wol);
+		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
+			(status == 0) ? "Sucessfully set" : "Failed", wol,
+			qdev->ndev->name);
+	}
+
+	return status;
+}
+
 static int ql_adapter_down(struct ql_adapter *qdev)
 {
 	int i, status = 0;
@@ -3497,6 +3629,10 @@
 	struct rx_ring *rx_ring;
 	struct tx_ring *tx_ring;
 	int cpu_cnt = min(MAX_CPUS, (int)num_online_cpus());
+	unsigned int lbq_buf_len = (qdev->ndev->mtu > 1500) ?
+		LARGE_BUFFER_MAX_SIZE : LARGE_BUFFER_MIN_SIZE;
+
+	qdev->lbq_buf_order = get_order(lbq_buf_len);
 
 	/* In a perfect world we have one RSS ring for each CPU
 	 * and each has it's own vector.  To do that we ask for
@@ -3544,11 +3680,14 @@
 			rx_ring->lbq_len = NUM_LARGE_BUFFERS;
 			rx_ring->lbq_size =
 			    rx_ring->lbq_len * sizeof(__le64);
-			rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE;
+			rx_ring->lbq_buf_size = (u16)lbq_buf_len;
+			QPRINTK(qdev, IFUP, DEBUG,
+				"lbq_buf_size %d, order = %d\n",
+				rx_ring->lbq_buf_size, qdev->lbq_buf_order);
 			rx_ring->sbq_len = NUM_SMALL_BUFFERS;
 			rx_ring->sbq_size =
 			    rx_ring->sbq_len * sizeof(__le64);
-			rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2;
+			rx_ring->sbq_buf_size = SMALL_BUF_MAP_SIZE;
 			rx_ring->type = RX_Q;
 		} else {
 			/*
@@ -3575,6 +3714,10 @@
 	int err = 0;
 	struct ql_adapter *qdev = netdev_priv(ndev);
 
+	err = ql_adapter_reset(qdev);
+	if (err)
+		return err;
+
 	err = ql_configure_rings(qdev);
 	if (err)
 		return err;
@@ -3594,14 +3737,63 @@
 	return err;
 }
 
+static int ql_change_rx_buffers(struct ql_adapter *qdev)
+{
+	struct rx_ring *rx_ring;
+	int i, status;
+	u32 lbq_buf_len;
+
+	/* Wait for an oustanding reset to complete. */
+	if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
+		int i = 3;
+		while (i-- && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
+			QPRINTK(qdev, IFUP, ERR,
+				 "Waiting for adapter UP...\n");
+			ssleep(1);
+		}
+
+		if (!i) {
+			QPRINTK(qdev, IFUP, ERR,
+			 "Timed out waiting for adapter UP\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	status = ql_adapter_down(qdev);
+	if (status)
+		goto error;
+
+	/* Get the new rx buffer size. */
+	lbq_buf_len = (qdev->ndev->mtu > 1500) ?
+		LARGE_BUFFER_MAX_SIZE : LARGE_BUFFER_MIN_SIZE;
+	qdev->lbq_buf_order = get_order(lbq_buf_len);
+
+	for (i = 0; i < qdev->rss_ring_count; i++) {
+		rx_ring = &qdev->rx_ring[i];
+		/* Set the new size. */
+		rx_ring->lbq_buf_size = lbq_buf_len;
+	}
+
+	status = ql_adapter_up(qdev);
+	if (status)
+		goto error;
+
+	return status;
+error:
+	QPRINTK(qdev, IFUP, ALERT,
+		"Driver up/down cycle failed, closing device.\n");
+	set_bit(QL_ADAPTER_UP, &qdev->flags);
+	dev_close(qdev->ndev);
+	return status;
+}
+
 static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
+	int status;
 
 	if (ndev->mtu == 1500 && new_mtu == 9000) {
 		QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n");
-		queue_delayed_work(qdev->workqueue,
-				&qdev->mpi_port_cfg_work, 0);
 	} else if (ndev->mtu == 9000 && new_mtu == 1500) {
 		QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n");
 	} else if ((ndev->mtu == 1500 && new_mtu == 1500) ||
@@ -3609,15 +3801,60 @@
 		return 0;
 	} else
 		return -EINVAL;
+
+	queue_delayed_work(qdev->workqueue,
+			&qdev->mpi_port_cfg_work, 3*HZ);
+
+	if (!netif_running(qdev->ndev)) {
+		ndev->mtu = new_mtu;
+		return 0;
+	}
+
 	ndev->mtu = new_mtu;
-	return 0;
+	status = ql_change_rx_buffers(qdev);
+	if (status) {
+		QPRINTK(qdev, IFUP, ERR,
+			"Changing MTU failed.\n");
+	}
+
+	return status;
 }
 
 static struct net_device_stats *qlge_get_stats(struct net_device
 					       *ndev)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	return &qdev->stats;
+	struct rx_ring *rx_ring = &qdev->rx_ring[0];
+	struct tx_ring *tx_ring = &qdev->tx_ring[0];
+	unsigned long pkts, mcast, dropped, errors, bytes;
+	int i;
+
+	/* Get RX stats. */
+	pkts = mcast = dropped = errors = bytes = 0;
+	for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
+			pkts += rx_ring->rx_packets;
+			bytes += rx_ring->rx_bytes;
+			dropped += rx_ring->rx_dropped;
+			errors += rx_ring->rx_errors;
+			mcast += rx_ring->rx_multicast;
+	}
+	ndev->stats.rx_packets = pkts;
+	ndev->stats.rx_bytes = bytes;
+	ndev->stats.rx_dropped = dropped;
+	ndev->stats.rx_errors = errors;
+	ndev->stats.multicast = mcast;
+
+	/* Get TX stats. */
+	pkts = errors = bytes = 0;
+	for (i = 0; i < qdev->tx_ring_count; i++, tx_ring++) {
+			pkts += tx_ring->tx_packets;
+			bytes += tx_ring->tx_bytes;
+			errors += tx_ring->tx_errors;
+	}
+	ndev->stats.tx_packets = pkts;
+	ndev->stats.tx_bytes = bytes;
+	ndev->stats.tx_errors = errors;
+	return &ndev->stats;
 }
 
 static void qlge_set_multicast_list(struct net_device *ndev)
@@ -3714,9 +3951,6 @@
 	struct sockaddr *addr = p;
 	int status;
 
-	if (netif_running(ndev))
-		return -EBUSY;
-
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 	memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
@@ -3868,8 +4102,7 @@
 				    struct net_device *ndev, int cards_found)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	int pos, err = 0;
-	u16 val16;
+	int err = 0;
 
 	memset((void *)qdev, 0, sizeof(*qdev));
 	err = pci_enable_device(pdev);
@@ -3881,18 +4114,12 @@
 	qdev->ndev = ndev;
 	qdev->pdev = pdev;
 	pci_set_drvdata(pdev, ndev);
-	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	if (pos <= 0) {
-		dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, "
-			"aborting.\n");
-		return pos;
-	} else {
-		pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16);
-		val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
-		val16 |= (PCI_EXP_DEVCTL_CERE |
-			  PCI_EXP_DEVCTL_NFERE |
-			  PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
-		pci_write_config_word(pdev, pos + PCI_EXP_DEVCTL, val16);
+
+	/* Set PCIe read request size */
+	err = pcie_set_readrq(pdev, 4096);
+	if (err) {
+		dev_err(&pdev->dev, "Set readrq failed.\n");
+		goto err_out;
 	}
 
 	err = pci_request_regions(pdev, DRV_NAME);
@@ -3991,7 +4218,6 @@
 	return err;
 }
 
-
 static const struct net_device_ops qlge_netdev_ops = {
 	.ndo_open		= qlge_open,
 	.ndo_stop		= qlge_close,
@@ -4002,9 +4228,9 @@
 	.ndo_set_mac_address	= qlge_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= qlge_tx_timeout,
-	.ndo_vlan_rx_register	= ql_vlan_rx_register,
-	.ndo_vlan_rx_add_vid	= ql_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid	= ql_vlan_rx_kill_vid,
+	.ndo_vlan_rx_register	= qlge_vlan_rx_register,
+	.ndo_vlan_rx_add_vid	= qlge_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= qlge_vlan_rx_kill_vid,
 };
 
 static int __devinit qlge_probe(struct pci_dev *pdev,
@@ -4060,10 +4286,21 @@
 	}
 	ql_link_off(qdev);
 	ql_display_dev_info(ndev);
+	atomic_set(&qdev->lb_count, 0);
 	cards_found++;
 	return 0;
 }
 
+netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev)
+{
+	return qlge_send(skb, ndev);
+}
+
+int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget)
+{
+	return ql_clean_inbound_rx_ring(rx_ring, budget);
+}
+
 static void __devexit qlge_remove(struct pci_dev *pdev)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
@@ -4193,6 +4430,7 @@
 			return err;
 	}
 
+	ql_wol(qdev);
 	err = pci_save_state(pdev);
 	if (err)
 		return err;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index aec05f2..e2b2286 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,25 +1,5 @@
 #include "qlge.h"
 
-static void ql_display_mb_sts(struct ql_adapter *qdev,
-						struct mbox_params *mbcp)
-{
-	int i;
-	static char *err_sts[] = {
-		"Command Complete",
-		"Command Not Supported",
-		"Host Interface Error",
-		"Checksum Error",
-		"Unused Completion Status",
-		"Test Failed",
-		"Command Parameter Error"};
-
-	QPRINTK(qdev, DRV, DEBUG, "%s.\n",
-		err_sts[mbcp->mbox_out[0] & 0x0000000f]);
-	for (i = 0; i < mbcp->out_count; i++)
-		QPRINTK(qdev, DRV, DEBUG, "mbox_out[%d] = 0x%.08x.\n",
-				i, mbcp->mbox_out[i]);
-}
-
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
 {
 	int status;
@@ -317,6 +297,7 @@
 	} else {
 		QPRINTK(qdev, DRV, ERR, "Firmware Revision  = 0x%.08x.\n",
 			mbcp->mbox_out[1]);
+		qdev->fw_rev_id = mbcp->mbox_out[1];
 		status = ql_cam_route_initialize(qdev);
 		if (status)
 			QPRINTK(qdev, IFUP, ERR,
@@ -446,6 +427,9 @@
 		ql_aen_lost(qdev, mbcp);
 		break;
 
+	case AEN_DCBX_CHG:
+		/* Need to support AEN 8110 */
+		break;
 	default:
 		QPRINTK(qdev, DRV, ERR,
 			"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
@@ -537,7 +521,6 @@
 					MB_CMD_STS_GOOD) &&
 		((mbcp->mbox_out[0] & 0x0000f000) !=
 					MB_CMD_STS_INTRMDT)) {
-		ql_display_mb_sts(qdev, mbcp);
 		status = -EIO;
 	}
 end:
@@ -655,7 +638,7 @@
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
+int ql_mb_set_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -690,7 +673,7 @@
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
+int ql_mb_get_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -720,6 +703,76 @@
 	return status;
 }
 
+int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE;
+	mbcp->mbox_in[1] = wol;
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+	u8 *addr = qdev->ndev->dev_addr;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 8;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC;
+	if (enable_wol) {
+		mbcp->mbox_in[1] = (u32)addr[0];
+		mbcp->mbox_in[2] = (u32)addr[1];
+		mbcp->mbox_in[3] = (u32)addr[2];
+		mbcp->mbox_in[4] = (u32)addr[3];
+		mbcp->mbox_in[5] = (u32)addr[4];
+		mbcp->mbox_in[6] = (u32)addr[5];
+		mbcp->mbox_in[7] = 0;
+	} else {
+		mbcp->mbox_in[1] = 0;
+		mbcp->mbox_in[2] = 1;
+		mbcp->mbox_in[3] = 1;
+		mbcp->mbox_in[4] = 1;
+		mbcp->mbox_in[5] = 1;
+		mbcp->mbox_in[6] = 1;
+		mbcp->mbox_in[7] = 0;
+	}
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
 /* IDC - Inter Device Communication...
  * Some firmware commands require consent of adjacent FCOE
  * function.  This function waits for the OK, or a
@@ -769,6 +822,61 @@
 	return status;
 }
 
+int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG;
+	mbcp->mbox_in[1] = led_config;
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set LED Configuration.\n");
+		status = -EIO;
+	}
+
+	return status;
+}
+
+int ql_mb_get_led_cfg(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to get LED Configuration.\n");
+		status = -EIO;
+	} else
+		qdev->led_config = mbcp->mbox_out[1];
+
+	return status;
+}
+
 int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
 {
 	struct mbox_params mbc;
@@ -930,8 +1038,11 @@
 	int status;
 	struct mbox_params *mbcp = &qdev->idc_mbc;
 	u32 aen;
+	int timeout;
 
+	rtnl_lock();
 	aen = mbcp->mbox_out[1] >> 16;
+	timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
 
 	switch (aen) {
 	default:
@@ -939,22 +1050,61 @@
 			"Bug: Unhandled IDC action.\n");
 		break;
 	case MB_CMD_PORT_RESET:
-	case MB_CMD_SET_PORT_CFG:
 	case MB_CMD_STOP_FW:
 		ql_link_off(qdev);
+	case MB_CMD_SET_PORT_CFG:
 		/* Signal the resulting link up AEN
 		 * that the frame routing and mac addr
 		 * needs to be set.
 		 * */
 		set_bit(QL_CAM_RT_SET, &qdev->flags);
-		rtnl_lock();
-		status = ql_mb_idc_ack(qdev);
-		rtnl_unlock();
-		if (status) {
-			QPRINTK(qdev, DRV, ERR,
-			"Bug: No pending IDC!\n");
+		/* Do ACK if required */
+		if (timeout) {
+			status = ql_mb_idc_ack(qdev);
+			if (status)
+				QPRINTK(qdev, DRV, ERR,
+					"Bug: No pending IDC!\n");
+		} else {
+			QPRINTK(qdev, DRV, DEBUG,
+				    "IDC ACK not required\n");
+			status = 0; /* success */
 		}
+		break;
+
+	/* These sub-commands issued by another (FCoE)
+	 * function are requesting to do an operation
+	 * on the shared resource (MPI environment).
+	 * We currently don't issue these so we just
+	 * ACK the request.
+	 */
+	case MB_CMD_IOP_RESTART_MPI:
+	case MB_CMD_IOP_PREP_LINK_DOWN:
+		/* Drop the link, reload the routing
+		 * table when link comes up.
+		 */
+		ql_link_off(qdev);
+		set_bit(QL_CAM_RT_SET, &qdev->flags);
+		/* Fall through. */
+	case MB_CMD_IOP_DVR_START:
+	case MB_CMD_IOP_FLASH_ACC:
+	case MB_CMD_IOP_CORE_DUMP_MPI:
+	case MB_CMD_IOP_PREP_UPDATE_MPI:
+	case MB_CMD_IOP_COMP_UPDATE_MPI:
+	case MB_CMD_IOP_NONE:	/*  an IDC without params */
+		/* Do ACK if required */
+		if (timeout) {
+			status = ql_mb_idc_ack(qdev);
+			if (status)
+				QPRINTK(qdev, DRV, ERR,
+				    "Bug: No pending IDC!\n");
+		} else {
+			QPRINTK(qdev, DRV, DEBUG,
+			    "IDC ACK not required\n");
+			status = 0; /* success */
+		}
+		break;
 	}
+	rtnl_unlock();
 }
 
 void ql_mpi_work(struct work_struct *work)
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 8b14c6e..f03e2e4 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -842,7 +842,7 @@
 	int ret;
 
 	/* Request IRQ and Register interrupt handler */
-	ret = request_irq(dev->irq, &r6040_interrupt,
+	ret = request_irq(dev->irq, r6040_interrupt,
 		IRQF_SHARED, dev->name, dev);
 	if (ret)
 		return ret;
@@ -958,8 +958,7 @@
 	}
 	/* Too many multicast addresses
 	 * accept all traffic */
-	else if ((dev->mc_count > MCAST_MAX)
-		|| (dev->flags & IFF_ALLMULTI))
+	else if ((dev->mc_count > MCAST_MAX) || (dev->flags & IFF_ALLMULTI))
 		reg |= 0x0020;
 
 	iowrite16(reg, ioaddr);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index b9221bd..acfc5a3 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -794,7 +794,7 @@
 	struct rtl8169_private *tp = netdev_priv(dev);
 	void __iomem *ioaddr = tp->mmio_addr;
 	unsigned int i;
-	static struct {
+	static const struct {
 		u32 opt;
 		u16 reg;
 		u8  mask;
@@ -1277,7 +1277,7 @@
 	 *
 	 * (RTL_R32(TxConfig) & 0x700000) == 0x200000 ? 8101Eb : 8101Ec
 	 */
-	const struct {
+	static const struct {
 		u32 mask;
 		u32 val;
 		int mac_version;
@@ -1351,7 +1351,7 @@
 	u16 val;
 };
 
-static void rtl_phy_write(void __iomem *ioaddr, struct phy_reg *regs, int len)
+static void rtl_phy_write(void __iomem *ioaddr, const struct phy_reg *regs, int len)
 {
 	while (len-- > 0) {
 		mdio_write(ioaddr, regs->reg, regs->val);
@@ -1361,7 +1361,7 @@
 
 static void rtl8169s_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x06, 0x006e },
 		{ 0x08, 0x0708 },
@@ -1428,7 +1428,7 @@
 
 static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0002 },
 		{ 0x01, 0x90d0 },
 		{ 0x1f, 0x0000 }
@@ -1457,7 +1457,7 @@
 static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
 				     void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x04, 0x0000 },
 		{ 0x03, 0x00a1 },
@@ -1504,7 +1504,7 @@
 
 static void rtl8169sce_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x04, 0x0000 },
 		{ 0x03, 0x00a1 },
@@ -1557,7 +1557,7 @@
 
 static void rtl8168bb_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x10, 0xf41b },
 		{ 0x1f, 0x0000 }
 	};
@@ -1570,7 +1570,7 @@
 
 static void rtl8168bef_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x10, 0xf41b },
 		{ 0x1f, 0x0000 }
@@ -1581,7 +1581,7 @@
 
 static void rtl8168cp_1_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0000 },
 		{ 0x1d, 0x0f00 },
 		{ 0x1f, 0x0002 },
@@ -1594,7 +1594,7 @@
 
 static void rtl8168cp_2_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x1d, 0x3d98 },
 		{ 0x1f, 0x0000 }
@@ -1609,7 +1609,7 @@
 
 static void rtl8168c_1_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x12, 0x2300 },
 		{ 0x1f, 0x0002 },
@@ -1638,7 +1638,7 @@
 
 static void rtl8168c_2_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x12, 0x2300 },
 		{ 0x03, 0x802f },
@@ -1666,7 +1666,7 @@
 
 static void rtl8168c_3_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x12, 0x2300 },
 		{ 0x1d, 0x3d98 },
@@ -1693,7 +1693,7 @@
 
 static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
 {
-	static struct phy_reg phy_reg_init_0[] = {
+	static const struct phy_reg phy_reg_init_0[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x06, 0x4064 },
 		{ 0x07, 0x2863 },
@@ -1712,14 +1712,14 @@
 		{ 0x1a, 0x05ad },
 		{ 0x14, 0x94c0 }
 	};
-	static struct phy_reg phy_reg_init_1[] = {
+	static const struct phy_reg phy_reg_init_1[] = {
 		{ 0x1f, 0x0002 },
 		{ 0x06, 0x5561 },
 		{ 0x1f, 0x0005 },
 		{ 0x05, 0x8332 },
 		{ 0x06, 0x5561 }
 	};
-	static struct phy_reg phy_reg_init_2[] = {
+	static const struct phy_reg phy_reg_init_2[] = {
 		{ 0x1f, 0x0005 },
 		{ 0x05, 0xffc2 },
 		{ 0x1f, 0x0005 },
@@ -2084,7 +2084,7 @@
 	rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
 
 	if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
-		struct phy_reg phy_reg_init[] = {
+		static const struct phy_reg phy_reg_init[] = {
 			{ 0x1f, 0x0002 },
 			{ 0x05, 0x669a },
 			{ 0x1f, 0x0005 },
@@ -2099,7 +2099,7 @@
 		val = mdio_read(ioaddr, 0x0d);
 
 		if ((val & 0x00ff) != 0x006c) {
-			u32 set[] = {
+			static const u32 set[] = {
 				0x0065, 0x0066, 0x0067, 0x0068,
 				0x0069, 0x006a, 0x006b, 0x006c
 			};
@@ -2112,7 +2112,7 @@
 				mdio_write(ioaddr, 0x0d, val | set[i]);
 		}
 	} else {
-		struct phy_reg phy_reg_init[] = {
+		static const struct phy_reg phy_reg_init[] = {
 			{ 0x1f, 0x0002 },
 			{ 0x05, 0x6662 },
 			{ 0x1f, 0x0005 },
@@ -2136,7 +2136,7 @@
 
 static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
 {
-	static struct phy_reg phy_reg_init_0[] = {
+	static const struct phy_reg phy_reg_init_0[] = {
 		{ 0x1f, 0x0001 },
 		{ 0x06, 0x4064 },
 		{ 0x07, 0x2863 },
@@ -2161,7 +2161,7 @@
 		{ 0x05, 0x8332 },
 		{ 0x06, 0x5561 }
 	};
-	static struct phy_reg phy_reg_init_1[] = {
+	static const struct phy_reg phy_reg_init_1[] = {
 		{ 0x1f, 0x0005 },
 		{ 0x05, 0xffc2 },
 		{ 0x1f, 0x0005 },
@@ -2477,7 +2477,7 @@
 	rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
 
 	if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
-		struct phy_reg phy_reg_init[] = {
+		static const struct phy_reg phy_reg_init[] = {
 			{ 0x1f, 0x0002 },
 			{ 0x05, 0x669a },
 			{ 0x1f, 0x0005 },
@@ -2505,7 +2505,7 @@
 				mdio_write(ioaddr, 0x0d, val | set[i]);
 		}
 	} else {
-		struct phy_reg phy_reg_init[] = {
+		static const struct phy_reg phy_reg_init[] = {
 			{ 0x1f, 0x0002 },
 			{ 0x05, 0x2642 },
 			{ 0x1f, 0x0005 },
@@ -2531,7 +2531,7 @@
 
 static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0002 },
 		{ 0x10, 0x0008 },
 		{ 0x0d, 0x006c },
@@ -2592,7 +2592,7 @@
 
 static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
 {
-	struct phy_reg phy_reg_init[] = {
+	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0003 },
 		{ 0x08, 0x441d },
 		{ 0x01, 0x9100 },
@@ -3235,6 +3235,10 @@
 	flush_scheduled_work();
 
 	unregister_netdev(dev);
+
+	/* restore original MAC address */
+	rtl_rar_set(tp, dev->perm_addr);
+
 	rtl_disable_msi(pdev, tp);
 	rtl8169_release_board(pdev, dev, tp->mmio_addr);
 	pci_set_drvdata(pdev, NULL);
@@ -3384,7 +3388,7 @@
 
 static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
 {
-	struct {
+	static const struct {
 		u32 mac_version;
 		u32 clk;
 		u32 val;
@@ -3508,7 +3512,7 @@
 	u16 bits;
 };
 
-static void rtl_ephy_init(void __iomem *ioaddr, struct ephy_info *e, int len)
+static void rtl_ephy_init(void __iomem *ioaddr, const struct ephy_info *e, int len)
 {
 	u16 w;
 
@@ -3579,7 +3583,7 @@
 
 static void rtl_hw_start_8168cp_1(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	static struct ephy_info e_info_8168cp[] = {
+	static const struct ephy_info e_info_8168cp[] = {
 		{ 0x01, 0,	0x0001 },
 		{ 0x02, 0x0800,	0x1000 },
 		{ 0x03, 0,	0x0042 },
@@ -3623,7 +3627,7 @@
 
 static void rtl_hw_start_8168c_1(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	static struct ephy_info e_info_8168c_1[] = {
+	static const struct ephy_info e_info_8168c_1[] = {
 		{ 0x02, 0x0800,	0x1000 },
 		{ 0x03, 0,	0x0002 },
 		{ 0x06, 0x0080,	0x0000 }
@@ -3640,7 +3644,7 @@
 
 static void rtl_hw_start_8168c_2(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	static struct ephy_info e_info_8168c_2[] = {
+	static const struct ephy_info e_info_8168c_2[] = {
 		{ 0x01, 0,	0x0001 },
 		{ 0x03, 0x0400,	0x0220 }
 	};
@@ -3783,7 +3787,7 @@
 
 static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	static struct ephy_info e_info_8102e_1[] = {
+	static const struct ephy_info e_info_8102e_1[] = {
 		{ 0x01,	0, 0x6e65 },
 		{ 0x02,	0, 0x091f },
 		{ 0x03,	0, 0xc2f9 },
@@ -4443,13 +4447,12 @@
 	if (pkt_size >= rx_copybreak)
 		goto out;
 
-	skb = netdev_alloc_skb(tp->dev, pkt_size + NET_IP_ALIGN);
+	skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
 	if (!skb)
 		goto out;
 
 	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
 				    PCI_DMA_FROMDEVICE);
-	skb_reserve(skb, NET_IP_ALIGN);
 	skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
 	*sk_buff = skb;
 	done = true;
@@ -4760,8 +4763,8 @@
 		    AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
 		    AcceptAllPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to filter perfectly -- accept all multicasts. */
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
 		mc_filter[1] = mc_filter[0] = 0xffffffff;
@@ -4881,6 +4884,9 @@
 
 	rtl8169_net_suspend(dev);
 
+	/* restore original MAC address */
+	rtl_rar_set(tp, dev->perm_addr);
+
 	spin_lock_irq(&tp->lock);
 
 	rtl8169_asic_down(ioaddr);
diff --git a/drivers/net/s6gmac.c b/drivers/net/s6gmac.c
index 4525cbe..45f2634 100644
--- a/drivers/net/s6gmac.c
+++ b/drivers/net/s6gmac.c
@@ -373,9 +373,9 @@
 static void s6gmac_rx_fillfifo(struct s6gmac *pd)
 {
 	struct sk_buff *skb;
-	while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB)
-			&& (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan))
-			&& (skb = dev_alloc_skb(S6_MAX_FRLEN + 2))) {
+	while ((((u8)(pd->rx_skb_i - pd->rx_skb_o)) < S6_NUM_RX_SKB) &&
+	       (!s6dmac_fifo_full(pd->rx_dma, pd->rx_chan)) &&
+	       (skb = dev_alloc_skb(S6_MAX_FRLEN + 2))) {
 		pd->rx_skb[(pd->rx_skb_i++) % S6_NUM_RX_SKB] = skb;
 		s6dmac_put_fifo_cache(pd->rx_dma, pd->rx_chan,
 			pd->io, (u32)skb->data, S6_MAX_FRLEN);
@@ -984,7 +984,7 @@
 	pd->rx_dma = DMA_MASK_DMAC(i);
 	pd->rx_chan = DMA_INDEX_CHNL(i);
 	pd->io = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
-	res = request_irq(dev->irq, &s6gmac_interrupt, 0, dev->name, dev);
+	res = request_irq(dev->irq, s6gmac_interrupt, 0, dev->name, dev);
 	if (res) {
 		printk(KERN_ERR DRV_PRMT "irq request failed: %d\n", dev->irq);
 		goto errirq;
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index c9c70ab..9f83a11 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -973,7 +973,7 @@
 	lp->rx_frame_id[1] = 0;
 	lp->rx_frame_id[2] = 0;
 	lp->rx_frame_id[3] = 0;
-	if (request_irq(dev->irq, &sb1000_interrupt, 0, "sb1000", dev)) {
+	if (request_irq(dev->irq, sb1000_interrupt, 0, "sb1000", dev)) {
 		return -EAGAIN;
 	}
 
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 508551f..564d4d7 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -1476,7 +1476,6 @@
 		V_MAC_TX_RL_THRSH(4) |
 		V_MAC_RX_PL_THRSH(4) |
 		V_MAC_RX_RD_THRSH(4) |	/* Must be '4' */
-		V_MAC_RX_PL_THRSH(4) |
 		V_MAC_RX_RL_THRSH(8) |
 		0;
 
@@ -2411,7 +2410,7 @@
 	 */
 
 	__raw_readq(sc->sbm_isr);
-	err = request_irq(dev->irq, &sbmac_intr, IRQF_SHARED, dev->name, dev);
+	err = request_irq(dev->irq, sbmac_intr, IRQF_SHARED, dev->name, dev);
 	if (err) {
 		printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name,
 		       dev->irq);
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 8d60300..e350503 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -428,9 +428,9 @@
 	void __iomem *port_base = priv->port_base;
 	u32 mar0 = 0, mar1 = 0;
 
-	if ((dev->flags & IFF_PROMISC)
-			|| dev->mc_count > multicast_filter_limit
-			|| (dev->flags & IFF_ALLMULTI))
+	if ((dev->flags & IFF_PROMISC) ||
+	    dev->mc_count > multicast_filter_limit ||
+	    (dev->flags & IFF_ALLMULTI))
 		mar0 = mar1 = 0xffffffff;
 	else if (dev->flags & IFF_MULTICAST) {
 		struct dev_mc_list *mc_list;
@@ -777,10 +777,10 @@
 
 		rx_ring_offset = (rx_ring_offset + 4) % RX_BUF_LEN;
 
-		if (unlikely(rx_status == 0
-				|| rx_size > (MAX_ETH_FRAME_SIZE + 4)
-				|| rx_size < 16
-				|| !(rx_status & RxStatesOK))) {
+		if (unlikely(rx_status == 0 ||
+			     rx_size > (MAX_ETH_FRAME_SIZE + 4) ||
+			     rx_size < 16 ||
+			     !(rx_status & RxStatesOK))) {
 			_sc92031_rx_tasklet_error(dev, rx_status, rx_size);
 			break;
 		}
@@ -793,7 +793,7 @@
 
 		rx_len -= rx_size_align + 4;
 
-		skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
 		if (unlikely(!skb)) {
 			if (printk_ratelimit())
 				printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
@@ -801,8 +801,6 @@
 			goto next;
 		}
 
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		if ((rx_ring_offset + pkt_size) > RX_BUF_LEN) {
 			memcpy(skb_put(skb, RX_BUF_LEN - rx_ring_offset),
 				rx_ring + rx_ring_offset, RX_BUF_LEN - rx_ring_offset);
diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c
index 39246d4..fe806bd 100644
--- a/drivers/net/seeq8005.c
+++ b/drivers/net/seeq8005.c
@@ -335,7 +335,7 @@
 
 #if 0
 	{
-		 int irqval = request_irq(dev->irq, &seeq8005_interrupt, 0, "seeq8005", dev);
+		 int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev);
 		 if (irqval) {
 			 printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
 					 dev->irq, irqval);
@@ -367,7 +367,7 @@
 	struct net_local *lp = netdev_priv(dev);
 
 	{
-		 int irqval = request_irq(dev->irq, &seeq8005_interrupt, 0, "seeq8005", dev);
+		 int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev);
 		 if (irqval) {
 			 printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name,
 					 dev->irq, irqval);
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig
index 260aafa..a65c986 100644
--- a/drivers/net/sfc/Kconfig
+++ b/drivers/net/sfc/Kconfig
@@ -1,5 +1,5 @@
 config SFC
-	tristate "Solarflare Solarstorm SFC4000 support"
+	tristate "Solarflare Solarstorm SFC4000/SFC9000-family support"
 	depends on PCI && INET
 	select MDIO
 	select CRC32
@@ -7,15 +7,16 @@
 	select I2C_ALGOBIT
 	help
 	  This driver supports 10-gigabit Ethernet cards based on
-	  the Solarflare Communications Solarstorm SFC4000 controller.
+	  the Solarflare Communications Solarstorm SFC4000 and
+	  SFC9000-family controllers.
 
 	  To compile this driver as a module, choose M here.  The module
 	  will be called sfc.
 config SFC_MTD
-	bool "Solarflare Solarstorm SFC4000 flash MTD support"
+	bool "Solarflare Solarstorm SFC4000/SFC9000-family MTD support"
 	depends on SFC && MTD && !(SFC=y && MTD=m)
 	default y
 	help
-	  This exposes the on-board flash memory as an MTD device (e.g.
-          /dev/mtd1).  This makes it possible to upload new boot code
-          to the NIC.
+	  This exposes the on-board flash memory as MTD devices (e.g.
+	  /dev/mtd1).  This makes it possible to upload new firmware
+	  to the NIC.
diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile
index b89f9be..1047b19 100644
--- a/drivers/net/sfc/Makefile
+++ b/drivers/net/sfc/Makefile
@@ -1,6 +1,7 @@
-sfc-y			+= efx.o falcon.o tx.o rx.o falcon_gmac.o \
-			   falcon_xmac.o selftest.o ethtool.o xfp_phy.o \
-			   mdio_10g.o tenxpress.o boards.o sfe4001.o
+sfc-y			+= efx.o nic.o falcon.o siena.o tx.o rx.o \
+			   falcon_gmac.o falcon_xmac.o mcdi_mac.o \
+			   selftest.o ethtool.o qt202x_phy.o mdio_10g.o \
+			   tenxpress.o falcon_boards.o mcdi.o mcdi_phy.o
 sfc-$(CONFIG_SFC_MTD)	+= mtd.o
 
 obj-$(CONFIG_SFC)	+= sfc.o
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h
index d54d84c..098ac2a 100644
--- a/drivers/net/sfc/bitfield.h
+++ b/drivers/net/sfc/bitfield.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -37,6 +37,8 @@
 #define EFX_DWORD_2_WIDTH 32
 #define EFX_DWORD_3_LBN 96
 #define EFX_DWORD_3_WIDTH 32
+#define EFX_QWORD_0_LBN 0
+#define EFX_QWORD_0_WIDTH 64
 
 /* Specified attribute (e.g. LBN) of the specified field */
 #define EFX_VAL(field, attribute) field ## _ ## attribute
@@ -520,19 +522,6 @@
 #define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD32
 #endif
 
-#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
-	if (falcon_rev(efx) >= FALCON_REV_B0) {			   \
-		EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
-	} else { \
-		EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
-	} \
-} while (0)
-
-#define EFX_QWORD_FIELD_VER(efx, qword, field)	\
-	(falcon_rev(efx) >= FALCON_REV_B0 ?	\
-	 EFX_QWORD_FIELD((qword), field##_B0) :	\
-	 EFX_QWORD_FIELD((qword), field##_A1))
-
 /* Used to avoid compiler warnings about shift range exceeding width
  * of the data types when dma_addr_t is only 32 bits wide.
  */
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
deleted file mode 100644
index 4a4c74c..0000000
--- a/drivers/net/sfc/boards.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#include "net_driver.h"
-#include "phy.h"
-#include "boards.h"
-#include "efx.h"
-#include "workarounds.h"
-
-/* Macros for unpacking the board revision */
-/* The revision info is in host byte order. */
-#define BOARD_TYPE(_rev) (_rev >> 8)
-#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
-#define BOARD_MINOR(_rev) (_rev & 0xf)
-
-/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
-#define BLINK_INTERVAL (HZ/2)
-
-static void blink_led_timer(unsigned long context)
-{
-	struct efx_nic *efx = (struct efx_nic *)context;
-	struct efx_blinker *bl = &efx->board_info.blinker;
-	efx->board_info.set_id_led(efx, bl->state);
-	bl->state = !bl->state;
-	if (bl->resubmit)
-		mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
-}
-
-static void board_blink(struct efx_nic *efx, bool blink)
-{
-	struct efx_blinker *blinker = &efx->board_info.blinker;
-
-	/* The rtnl mutex serialises all ethtool ioctls, so
-	 * nothing special needs doing here. */
-	if (blink) {
-		blinker->resubmit = true;
-		blinker->state = false;
-		setup_timer(&blinker->timer, blink_led_timer,
-			    (unsigned long)efx);
-		mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
-	} else {
-		blinker->resubmit = false;
-		if (blinker->timer.function)
-			del_timer_sync(&blinker->timer);
-		efx->board_info.init_leds(efx);
-	}
-}
-
-/*****************************************************************************
- * Support for LM87 sensor chip used on several boards
- */
-#define LM87_REG_ALARMS1		0x41
-#define LM87_REG_ALARMS2		0x42
-#define LM87_IN_LIMITS(nr, _min, _max)			\
-	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
-#define LM87_AIN_LIMITS(nr, _min, _max)			\
-	0x3B + (nr), _max, 0x1A + (nr), _min
-#define LM87_TEMP_INT_LIMITS(_min, _max)		\
-	0x39, _max, 0x3A, _min
-#define LM87_TEMP_EXT1_LIMITS(_min, _max)		\
-	0x37, _max, 0x38, _min
-
-#define LM87_ALARM_TEMP_INT		0x10
-#define LM87_ALARM_TEMP_EXT1		0x20
-
-#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
-
-static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
-			 const u8 *reg_values)
-{
-	struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
-	int rc;
-
-	if (!client)
-		return -EIO;
-
-	while (*reg_values) {
-		u8 reg = *reg_values++;
-		u8 value = *reg_values++;
-		rc = i2c_smbus_write_byte_data(client, reg, value);
-		if (rc)
-			goto err;
-	}
-
-	efx->board_info.hwmon_client = client;
-	return 0;
-
-err:
-	i2c_unregister_device(client);
-	return rc;
-}
-
-static void efx_fini_lm87(struct efx_nic *efx)
-{
-	i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
-{
-	struct i2c_client *client = efx->board_info.hwmon_client;
-	s32 alarms1, alarms2;
-
-	/* If link is up then do not monitor temperature */
-	if (EFX_WORKAROUND_7884(efx) && efx->link_up)
-		return 0;
-
-	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
-	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
-	if (alarms1 < 0)
-		return alarms1;
-	if (alarms2 < 0)
-		return alarms2;
-	alarms1 &= mask;
-	alarms2 &= mask >> 8;
-	if (alarms1 || alarms2) {
-		EFX_ERR(efx,
-			"LM87 detected a hardware failure (status %02x:%02x)"
-			"%s%s\n",
-			alarms1, alarms2,
-			(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
-			(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
-		return -ERANGE;
-	}
-
-	return 0;
-}
-
-#else /* !CONFIG_SENSORS_LM87 */
-
-static inline int
-efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
-	      const u8 *reg_values)
-{
-	return 0;
-}
-static inline void efx_fini_lm87(struct efx_nic *efx)
-{
-}
-static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
-{
-	return 0;
-}
-
-#endif /* CONFIG_SENSORS_LM87 */
-
-/*****************************************************************************
- * Support for the SFE4002
- *
- */
-static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
-
-static const u8 sfe4002_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
-	0
-};
-
-static struct i2c_board_info sfe4002_hwmon_info = {
-	I2C_BOARD_INFO("lm87", 0x2e),
-	.platform_data	= &sfe4002_lm87_channel,
-};
-
-/****************************************************************************/
-/* LED allocations. Note that on rev A0 boards the schematic and the reality
- * differ: red and green are swapped. Below is the fixed (A1) layout (there
- * are only 3 A0 boards in existence, so no real reason to make this
- * conditional).
- */
-#define SFE4002_FAULT_LED (2)	/* Red */
-#define SFE4002_RX_LED    (0)	/* Green */
-#define SFE4002_TX_LED    (1)	/* Amber */
-
-static void sfe4002_init_leds(struct efx_nic *efx)
-{
-	/* Set the TX and RX LEDs to reflect status and activity, and the
-	 * fault LED off */
-	xfp_set_led(efx, SFE4002_TX_LED,
-		    QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
-	xfp_set_led(efx, SFE4002_RX_LED,
-		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
-	xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
-}
-
-static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
-{
-	xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
-			QUAKE_LED_OFF);
-}
-
-static int sfe4002_check_hw(struct efx_nic *efx)
-{
-	/* A0 board rev. 4002s report a temperature fault the whole time
-	 * (bad sensor) so we mask it out. */
-	unsigned alarm_mask =
-		(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
-		~LM87_ALARM_TEMP_EXT1 : ~0;
-
-	return efx_check_lm87(efx, alarm_mask);
-}
-
-static int sfe4002_init(struct efx_nic *efx)
-{
-	int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
-	if (rc)
-		return rc;
-	efx->board_info.monitor = sfe4002_check_hw;
-	efx->board_info.init_leds = sfe4002_init_leds;
-	efx->board_info.set_id_led = sfe4002_set_id_led;
-	efx->board_info.blink = board_blink;
-	efx->board_info.fini = efx_fini_lm87;
-	return 0;
-}
-
-/*****************************************************************************
- * Support for the SFN4112F
- *
- */
-static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
-
-static const u8 sfn4112f_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
-	0
-};
-
-static struct i2c_board_info sfn4112f_hwmon_info = {
-	I2C_BOARD_INFO("lm87", 0x2e),
-	.platform_data	= &sfn4112f_lm87_channel,
-};
-
-#define SFN4112F_ACT_LED	0
-#define SFN4112F_LINK_LED	1
-
-static void sfn4112f_init_leds(struct efx_nic *efx)
-{
-	xfp_set_led(efx, SFN4112F_ACT_LED,
-		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
-	xfp_set_led(efx, SFN4112F_LINK_LED,
-		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
-}
-
-static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
-{
-	xfp_set_led(efx, SFN4112F_LINK_LED,
-		    state ? QUAKE_LED_ON : QUAKE_LED_OFF);
-}
-
-static int sfn4112f_check_hw(struct efx_nic *efx)
-{
-	/* Mask out unused sensors */
-	return efx_check_lm87(efx, ~0x48);
-}
-
-static int sfn4112f_init(struct efx_nic *efx)
-{
-	int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
-	if (rc)
-		return rc;
-	efx->board_info.monitor = sfn4112f_check_hw;
-	efx->board_info.init_leds = sfn4112f_init_leds;
-	efx->board_info.set_id_led = sfn4112f_set_id_led;
-	efx->board_info.blink = board_blink;
-	efx->board_info.fini = efx_fini_lm87;
-	return 0;
-}
-
-/* This will get expanded as board-specific details get moved out of the
- * PHY drivers. */
-struct efx_board_data {
-	enum efx_board_type type;
-	const char *ref_model;
-	const char *gen_type;
-	int (*init) (struct efx_nic *nic);
-};
-
-
-static struct efx_board_data board_data[] = {
-	{ EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
-	{ EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
-	{ EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
-	  sfn4111t_init },
-	{ EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
-	  sfn4112f_init },
-};
-
-void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
-{
-	struct efx_board_data *data = NULL;
-	int i;
-
-	efx->board_info.type = BOARD_TYPE(revision_info);
-	efx->board_info.major = BOARD_MAJOR(revision_info);
-	efx->board_info.minor = BOARD_MINOR(revision_info);
-
-	for (i = 0; i < ARRAY_SIZE(board_data); i++)
-		if (board_data[i].type == efx->board_info.type)
-			data = &board_data[i];
-
-	if (data) {
-		EFX_INFO(efx, "board is %s rev %c%d\n",
-			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
-			 ? data->ref_model : data->gen_type,
-			 'A' + efx->board_info.major, efx->board_info.minor);
-		efx->board_info.init = data->init;
-	} else {
-		EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
-	}
-}
diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h
deleted file mode 100644
index 44942de..0000000
--- a/drivers/net/sfc/boards.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_BOARDS_H
-#define EFX_BOARDS_H
-
-/* Board IDs (must fit in 8 bits) */
-enum efx_board_type {
-	EFX_BOARD_SFE4001 = 1,
-	EFX_BOARD_SFE4002 = 2,
-	EFX_BOARD_SFN4111T = 0x51,
-	EFX_BOARD_SFN4112F = 0x52,
-};
-
-extern void efx_set_board_info(struct efx_nic *efx, u16 revision_info);
-
-/* SFE4001 (10GBASE-T) */
-extern int sfe4001_init(struct efx_nic *efx);
-/* SFN4111T (100/1000/10GBASE-T) */
-extern int sfn4111t_init(struct efx_nic *efx);
-
-#endif
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index cc4b2f9..f983e3b 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2005-2008 Solarflare Communications Inc.
+ * Copyright 2005-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -21,12 +21,73 @@
 #include <linux/ethtool.h>
 #include <linux/topology.h>
 #include "net_driver.h"
-#include "ethtool.h"
-#include "tx.h"
-#include "rx.h"
 #include "efx.h"
 #include "mdio_10g.h"
-#include "falcon.h"
+#include "nic.h"
+
+#include "mcdi.h"
+
+/**************************************************************************
+ *
+ * Type name strings
+ *
+ **************************************************************************
+ */
+
+/* Loopback mode names (see LOOPBACK_MODE()) */
+const unsigned int efx_loopback_mode_max = LOOPBACK_MAX;
+const char *efx_loopback_mode_names[] = {
+	[LOOPBACK_NONE]		= "NONE",
+	[LOOPBACK_DATA]		= "DATAPATH",
+	[LOOPBACK_GMAC]		= "GMAC",
+	[LOOPBACK_XGMII]	= "XGMII",
+	[LOOPBACK_XGXS]		= "XGXS",
+	[LOOPBACK_XAUI]  	= "XAUI",
+	[LOOPBACK_GMII] 	= "GMII",
+	[LOOPBACK_SGMII] 	= "SGMII",
+	[LOOPBACK_XGBR]		= "XGBR",
+	[LOOPBACK_XFI]		= "XFI",
+	[LOOPBACK_XAUI_FAR]	= "XAUI_FAR",
+	[LOOPBACK_GMII_FAR]	= "GMII_FAR",
+	[LOOPBACK_SGMII_FAR]	= "SGMII_FAR",
+	[LOOPBACK_XFI_FAR]	= "XFI_FAR",
+	[LOOPBACK_GPHY]		= "GPHY",
+	[LOOPBACK_PHYXS]	= "PHYXS",
+	[LOOPBACK_PCS]	 	= "PCS",
+	[LOOPBACK_PMAPMD] 	= "PMA/PMD",
+	[LOOPBACK_XPORT]	= "XPORT",
+	[LOOPBACK_XGMII_WS]	= "XGMII_WS",
+	[LOOPBACK_XAUI_WS]  	= "XAUI_WS",
+	[LOOPBACK_XAUI_WS_FAR]  = "XAUI_WS_FAR",
+	[LOOPBACK_XAUI_WS_NEAR] = "XAUI_WS_NEAR",
+	[LOOPBACK_GMII_WS] 	= "GMII_WS",
+	[LOOPBACK_XFI_WS]	= "XFI_WS",
+	[LOOPBACK_XFI_WS_FAR]	= "XFI_WS_FAR",
+	[LOOPBACK_PHYXS_WS]  	= "PHYXS_WS",
+};
+
+/* Interrupt mode names (see INT_MODE())) */
+const unsigned int efx_interrupt_mode_max = EFX_INT_MODE_MAX;
+const char *efx_interrupt_mode_names[] = {
+	[EFX_INT_MODE_MSIX]   = "MSI-X",
+	[EFX_INT_MODE_MSI]    = "MSI",
+	[EFX_INT_MODE_LEGACY] = "legacy",
+};
+
+const unsigned int efx_reset_type_max = RESET_TYPE_MAX;
+const char *efx_reset_type_names[] = {
+	[RESET_TYPE_INVISIBLE]     = "INVISIBLE",
+	[RESET_TYPE_ALL]           = "ALL",
+	[RESET_TYPE_WORLD]         = "WORLD",
+	[RESET_TYPE_DISABLE]       = "DISABLE",
+	[RESET_TYPE_TX_WATCHDOG]   = "TX_WATCHDOG",
+	[RESET_TYPE_INT_ERROR]     = "INT_ERROR",
+	[RESET_TYPE_RX_RECOVERY]   = "RX_RECOVERY",
+	[RESET_TYPE_RX_DESC_FETCH] = "RX_DESC_FETCH",
+	[RESET_TYPE_TX_DESC_FETCH] = "TX_DESC_FETCH",
+	[RESET_TYPE_TX_SKIP]       = "TX_SKIP",
+	[RESET_TYPE_MC_FAILURE]    = "MC_FAILURE",
+};
 
 #define EFX_MAX_MTU (9 * 1024)
 
@@ -145,7 +206,8 @@
 
 #define EFX_ASSERT_RESET_SERIALISED(efx)		\
 	do {						\
-		if (efx->state == STATE_RUNNING)	\
+		if ((efx->state == STATE_RUNNING) ||	\
+		    (efx->state == STATE_DISABLED))	\
 			ASSERT_RTNL();			\
 	} while (0)
 
@@ -171,7 +233,7 @@
 		     !channel->enabled))
 		return 0;
 
-	rx_packets = falcon_process_eventq(channel, rx_quota);
+	rx_packets = efx_nic_process_eventq(channel, rx_quota);
 	if (rx_packets == 0)
 		return 0;
 
@@ -203,7 +265,7 @@
 	channel->work_pending = false;
 	smp_wmb();
 
-	falcon_eventq_read_ack(channel);
+	efx_nic_eventq_read_ack(channel);
 }
 
 /* NAPI poll handler
@@ -228,26 +290,20 @@
 		if (channel->used_flags & EFX_USED_BY_RX &&
 		    efx->irq_rx_adaptive &&
 		    unlikely(++channel->irq_count == 1000)) {
-			unsigned old_irq_moderation = channel->irq_moderation;
-
 			if (unlikely(channel->irq_mod_score <
 				     irq_adapt_low_thresh)) {
-				channel->irq_moderation =
-					max_t(int,
-					      channel->irq_moderation -
-					      FALCON_IRQ_MOD_RESOLUTION,
-					      FALCON_IRQ_MOD_RESOLUTION);
+				if (channel->irq_moderation > 1) {
+					channel->irq_moderation -= 1;
+					efx->type->push_irq_moderation(channel);
+				}
 			} else if (unlikely(channel->irq_mod_score >
 					    irq_adapt_high_thresh)) {
-				channel->irq_moderation =
-					min(channel->irq_moderation +
-					    FALCON_IRQ_MOD_RESOLUTION,
-					    efx->irq_rx_moderation);
+				if (channel->irq_moderation <
+				    efx->irq_rx_moderation) {
+					channel->irq_moderation += 1;
+					efx->type->push_irq_moderation(channel);
+				}
 			}
-
-			if (channel->irq_moderation != old_irq_moderation)
-				falcon_set_int_moderation(channel);
-
 			channel->irq_count = 0;
 			channel->irq_mod_score = 0;
 		}
@@ -280,7 +336,7 @@
 	BUG_ON(!channel->enabled);
 
 	/* Disable interrupts and wait for ISRs to complete */
-	falcon_disable_interrupts(efx);
+	efx_nic_disable_interrupts(efx);
 	if (efx->legacy_irq)
 		synchronize_irq(efx->legacy_irq);
 	if (channel->irq)
@@ -290,14 +346,14 @@
 	napi_disable(&channel->napi_str);
 
 	/* Poll the channel */
-	efx_process_channel(channel, efx->type->evq_size);
+	efx_process_channel(channel, EFX_EVQ_SIZE);
 
 	/* Ack the eventq. This may cause an interrupt to be generated
 	 * when they are reenabled */
 	efx_channel_processed(channel);
 
 	napi_enable(&channel->napi_str);
-	falcon_enable_interrupts(efx);
+	efx_nic_enable_interrupts(efx);
 }
 
 /* Create event queue
@@ -309,7 +365,7 @@
 {
 	EFX_LOG(channel->efx, "chan %d create event queue\n", channel->channel);
 
-	return falcon_probe_eventq(channel);
+	return efx_nic_probe_eventq(channel);
 }
 
 /* Prepare channel's event queue */
@@ -319,21 +375,21 @@
 
 	channel->eventq_read_ptr = 0;
 
-	falcon_init_eventq(channel);
+	efx_nic_init_eventq(channel);
 }
 
 static void efx_fini_eventq(struct efx_channel *channel)
 {
 	EFX_LOG(channel->efx, "chan %d fini event queue\n", channel->channel);
 
-	falcon_fini_eventq(channel);
+	efx_nic_fini_eventq(channel);
 }
 
 static void efx_remove_eventq(struct efx_channel *channel)
 {
 	EFX_LOG(channel->efx, "chan %d remove event queue\n", channel->channel);
 
-	falcon_remove_eventq(channel);
+	efx_nic_remove_eventq(channel);
 }
 
 /**************************************************************************
@@ -499,7 +555,7 @@
 	EFX_ASSERT_RESET_SERIALISED(efx);
 	BUG_ON(efx->port_enabled);
 
-	rc = falcon_flush_queues(efx);
+	rc = efx_nic_flush_queues(efx);
 	if (rc)
 		EFX_ERR(efx, "failed to flush queues\n");
 	else
@@ -547,8 +603,10 @@
  * netif_carrier_on/off) of the link status, and also maintains the
  * link status's stop on the port's TX queue.
  */
-static void efx_link_status_changed(struct efx_nic *efx)
+void efx_link_status_changed(struct efx_nic *efx)
 {
+	struct efx_link_state *link_state = &efx->link_state;
+
 	/* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
 	 * that no events are triggered between unregister_netdev() and the
 	 * driver unloading. A more general condition is that NETDEV_CHANGE
@@ -561,19 +619,19 @@
 		return;
 	}
 
-	if (efx->link_up != netif_carrier_ok(efx->net_dev)) {
+	if (link_state->up != netif_carrier_ok(efx->net_dev)) {
 		efx->n_link_state_changes++;
 
-		if (efx->link_up)
+		if (link_state->up)
 			netif_carrier_on(efx->net_dev);
 		else
 			netif_carrier_off(efx->net_dev);
 	}
 
 	/* Status message for kernel log */
-	if (efx->link_up) {
+	if (link_state->up) {
 		EFX_INFO(efx, "link up at %uMbps %s-duplex (MTU %d)%s\n",
-			 efx->link_speed, efx->link_fd ? "full" : "half",
+			 link_state->speed, link_state->fd ? "full" : "half",
 			 efx->net_dev->mtu,
 			 (efx->promiscuous ? " [PROMISC]" : ""));
 	} else {
@@ -582,16 +640,49 @@
 
 }
 
+void efx_link_set_advertising(struct efx_nic *efx, u32 advertising)
+{
+	efx->link_advertising = advertising;
+	if (advertising) {
+		if (advertising & ADVERTISED_Pause)
+			efx->wanted_fc |= (EFX_FC_TX | EFX_FC_RX);
+		else
+			efx->wanted_fc &= ~(EFX_FC_TX | EFX_FC_RX);
+		if (advertising & ADVERTISED_Asym_Pause)
+			efx->wanted_fc ^= EFX_FC_TX;
+	}
+}
+
+void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type wanted_fc)
+{
+	efx->wanted_fc = wanted_fc;
+	if (efx->link_advertising) {
+		if (wanted_fc & EFX_FC_RX)
+			efx->link_advertising |= (ADVERTISED_Pause |
+						  ADVERTISED_Asym_Pause);
+		else
+			efx->link_advertising &= ~(ADVERTISED_Pause |
+						   ADVERTISED_Asym_Pause);
+		if (wanted_fc & EFX_FC_TX)
+			efx->link_advertising ^= ADVERTISED_Asym_Pause;
+	}
+}
+
 static void efx_fini_port(struct efx_nic *efx);
 
-/* This call reinitialises the MAC to pick up new PHY settings. The
- * caller must hold the mac_lock */
-void __efx_reconfigure_port(struct efx_nic *efx)
+/* Push loopback/power/transmit disable settings to the PHY, and reconfigure
+ * the MAC appropriately. All other PHY configuration changes are pushed
+ * through phy_op->set_settings(), and pushed asynchronously to the MAC
+ * through efx_monitor().
+ *
+ * Callers must hold the mac_lock
+ */
+int __efx_reconfigure_port(struct efx_nic *efx)
 {
-	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+	enum efx_phy_mode phy_mode;
+	int rc;
 
-	EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n",
-		raw_smp_processor_id());
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
 
 	/* Serialise the promiscuous flag with efx_set_multicast_list. */
 	if (efx_dev_registered(efx)) {
@@ -599,61 +690,48 @@
 		netif_addr_unlock_bh(efx->net_dev);
 	}
 
-	falcon_deconfigure_mac_wrapper(efx);
-
-	/* Reconfigure the PHY, disabling transmit in mac level loopback. */
+	/* Disable PHY transmit in mac level loopbacks */
+	phy_mode = efx->phy_mode;
 	if (LOOPBACK_INTERNAL(efx))
 		efx->phy_mode |= PHY_MODE_TX_DISABLED;
 	else
 		efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
-	efx->phy_op->reconfigure(efx);
 
-	if (falcon_switch_mac(efx))
-		goto fail;
+	rc = efx->type->reconfigure_port(efx);
 
-	efx->mac_op->reconfigure(efx);
+	if (rc)
+		efx->phy_mode = phy_mode;
 
-	/* Inform kernel of loss/gain of carrier */
-	efx_link_status_changed(efx);
-	return;
-
-fail:
-	EFX_ERR(efx, "failed to reconfigure MAC\n");
-	efx->port_enabled = false;
-	efx_fini_port(efx);
+	return rc;
 }
 
 /* Reinitialise the MAC to pick up new PHY settings, even if the port is
  * disabled. */
-void efx_reconfigure_port(struct efx_nic *efx)
+int efx_reconfigure_port(struct efx_nic *efx)
 {
+	int rc;
+
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
 	mutex_lock(&efx->mac_lock);
-	__efx_reconfigure_port(efx);
+	rc = __efx_reconfigure_port(efx);
 	mutex_unlock(&efx->mac_lock);
+
+	return rc;
 }
 
-/* Asynchronous efx_reconfigure_port work item. To speed up efx_flush_all()
- * we don't efx_reconfigure_port() if the port is disabled. Care is taken
- * in efx_stop_all() and efx_start_port() to prevent PHY events being lost */
-static void efx_phy_work(struct work_struct *data)
-{
-	struct efx_nic *efx = container_of(data, struct efx_nic, phy_work);
-
-	mutex_lock(&efx->mac_lock);
-	if (efx->port_enabled)
-		__efx_reconfigure_port(efx);
-	mutex_unlock(&efx->mac_lock);
-}
-
+/* Asynchronous work item for changing MAC promiscuity and multicast
+ * hash.  Avoid a drain/rx_ingress enable by reconfiguring the current
+ * MAC directly. */
 static void efx_mac_work(struct work_struct *data)
 {
 	struct efx_nic *efx = container_of(data, struct efx_nic, mac_work);
 
 	mutex_lock(&efx->mac_lock);
-	if (efx->port_enabled)
-		efx->mac_op->irq(efx);
+	if (efx->port_enabled) {
+		efx->type->push_multicast_hash(efx);
+		efx->mac_op->reconfigure(efx);
+	}
 	mutex_unlock(&efx->mac_lock);
 }
 
@@ -663,8 +741,8 @@
 
 	EFX_LOG(efx, "create port\n");
 
-	/* Connect up MAC/PHY operations table and read MAC address */
-	rc = falcon_probe_port(efx);
+	/* Connect up MAC/PHY operations table */
+	rc = efx->type->probe_port(efx);
 	if (rc)
 		goto err;
 
@@ -699,29 +777,33 @@
 
 	EFX_LOG(efx, "init port\n");
 
+	mutex_lock(&efx->mac_lock);
+
 	rc = efx->phy_op->init(efx);
 	if (rc)
-		return rc;
-	mutex_lock(&efx->mac_lock);
-	efx->phy_op->reconfigure(efx);
-	rc = falcon_switch_mac(efx);
-	mutex_unlock(&efx->mac_lock);
-	if (rc)
-		goto fail;
-	efx->mac_op->reconfigure(efx);
+		goto fail1;
 
 	efx->port_initialized = true;
-	efx_stats_enable(efx);
+
+	/* Reconfigure the MAC before creating dma queues (required for
+	 * Falcon/A1 where RX_INGR_EN/TX_DRAIN_EN isn't supported) */
+	efx->mac_op->reconfigure(efx);
+
+	/* Ensure the PHY advertises the correct flow control settings */
+	rc = efx->phy_op->reconfigure(efx);
+	if (rc)
+		goto fail2;
+
+	mutex_unlock(&efx->mac_lock);
 	return 0;
 
-fail:
+fail2:
 	efx->phy_op->fini(efx);
+fail1:
+	mutex_unlock(&efx->mac_lock);
 	return rc;
 }
 
-/* Allow efx_reconfigure_port() to be scheduled, and close the window
- * between efx_stop_port and efx_flush_all whereby a previously scheduled
- * efx_phy_work()/efx_mac_work() may have been cancelled */
 static void efx_start_port(struct efx_nic *efx)
 {
 	EFX_LOG(efx, "start port\n");
@@ -729,15 +811,16 @@
 
 	mutex_lock(&efx->mac_lock);
 	efx->port_enabled = true;
-	__efx_reconfigure_port(efx);
-	efx->mac_op->irq(efx);
+
+	/* efx_mac_work() might have been scheduled after efx_stop_port(),
+	 * and then cancelled by efx_flush_all() */
+	efx->type->push_multicast_hash(efx);
+	efx->mac_op->reconfigure(efx);
+
 	mutex_unlock(&efx->mac_lock);
 }
 
-/* Prevent efx_phy_work, efx_mac_work, and efx_monitor() from executing,
- * and efx_set_multicast_list() from scheduling efx_phy_work. efx_phy_work
- * and efx_mac_work may still be scheduled via NAPI processing until
- * efx_flush_all() is called */
+/* Prevent efx_mac_work() and efx_monitor() from working */
 static void efx_stop_port(struct efx_nic *efx)
 {
 	EFX_LOG(efx, "stop port\n");
@@ -760,11 +843,10 @@
 	if (!efx->port_initialized)
 		return;
 
-	efx_stats_disable(efx);
 	efx->phy_op->fini(efx);
 	efx->port_initialized = false;
 
-	efx->link_up = false;
+	efx->link_state.up = false;
 	efx_link_status_changed(efx);
 }
 
@@ -772,7 +854,7 @@
 {
 	EFX_LOG(efx, "destroying port\n");
 
-	falcon_remove_port(efx);
+	efx->type->remove_port(efx);
 }
 
 /**************************************************************************
@@ -824,9 +906,8 @@
 		goto fail2;
 	}
 
-	efx->membase_phys = pci_resource_start(efx->pci_dev,
-					       efx->type->mem_bar);
-	rc = pci_request_region(pci_dev, efx->type->mem_bar, "sfc");
+	efx->membase_phys = pci_resource_start(efx->pci_dev, EFX_MEM_BAR);
+	rc = pci_request_region(pci_dev, EFX_MEM_BAR, "sfc");
 	if (rc) {
 		EFX_ERR(efx, "request for memory BAR failed\n");
 		rc = -EIO;
@@ -835,21 +916,20 @@
 	efx->membase = ioremap_nocache(efx->membase_phys,
 				       efx->type->mem_map_size);
 	if (!efx->membase) {
-		EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n",
-			efx->type->mem_bar,
+		EFX_ERR(efx, "could not map memory BAR at %llx+%x\n",
 			(unsigned long long)efx->membase_phys,
 			efx->type->mem_map_size);
 		rc = -ENOMEM;
 		goto fail4;
 	}
-	EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n",
-		efx->type->mem_bar, (unsigned long long)efx->membase_phys,
+	EFX_LOG(efx, "memory BAR at %llx+%x (virtual %p)\n",
+		(unsigned long long)efx->membase_phys,
 		efx->type->mem_map_size, efx->membase);
 
 	return 0;
 
  fail4:
-	pci_release_region(efx->pci_dev, efx->type->mem_bar);
+	pci_release_region(efx->pci_dev, EFX_MEM_BAR);
  fail3:
 	efx->membase_phys = 0;
  fail2:
@@ -868,7 +948,7 @@
 	}
 
 	if (efx->membase_phys) {
-		pci_release_region(efx->pci_dev, efx->type->mem_bar);
+		pci_release_region(efx->pci_dev, EFX_MEM_BAR);
 		efx->membase_phys = 0;
 	}
 
@@ -1011,7 +1091,7 @@
 	EFX_LOG(efx, "creating NIC\n");
 
 	/* Carry out hardware-type specific initialisation */
-	rc = falcon_probe_nic(efx);
+	rc = efx->type->probe(efx);
 	if (rc)
 		return rc;
 
@@ -1032,7 +1112,7 @@
 	EFX_LOG(efx, "destroying NIC\n");
 
 	efx_remove_interrupts(efx);
-	falcon_remove_nic(efx);
+	efx->type->remove(efx);
 }
 
 /**************************************************************************
@@ -1112,12 +1192,31 @@
 	efx_for_each_channel(channel, efx)
 		efx_start_channel(channel);
 
-	falcon_enable_interrupts(efx);
+	efx_nic_enable_interrupts(efx);
 
-	/* Start hardware monitor if we're in RUNNING */
-	if (efx->state == STATE_RUNNING)
+	/* Switch to event based MCDI completions after enabling interrupts.
+	 * If a reset has been scheduled, then we need to stay in polled mode.
+	 * Rather than serialising efx_mcdi_mode_event() [which sleeps] and
+	 * reset_pending [modified from an atomic context], we instead guarantee
+	 * that efx_mcdi_mode_poll() isn't reverted erroneously */
+	efx_mcdi_mode_event(efx);
+	if (efx->reset_pending != RESET_TYPE_NONE)
+		efx_mcdi_mode_poll(efx);
+
+	/* Start the hardware monitor if there is one. Otherwise (we're link
+	 * event driven), we have to poll the PHY because after an event queue
+	 * flush, we could have a missed a link state change */
+	if (efx->type->monitor != NULL) {
 		queue_delayed_work(efx->workqueue, &efx->monitor_work,
 				   efx_monitor_interval);
+	} else {
+		mutex_lock(&efx->mac_lock);
+		if (efx->phy_op->poll(efx))
+			efx_link_status_changed(efx);
+		mutex_unlock(&efx->mac_lock);
+	}
+
+	efx->type->start_stats(efx);
 }
 
 /* Flush all delayed work. Should only be called when no more delayed work
@@ -1136,8 +1235,6 @@
 
 	/* Stop scheduled port reconfigurations */
 	cancel_work_sync(&efx->mac_work);
-	cancel_work_sync(&efx->phy_work);
-
 }
 
 /* Quiesce hardware and software without bringing the link down.
@@ -1155,8 +1252,13 @@
 	if (!efx->port_enabled)
 		return;
 
+	efx->type->stop_stats(efx);
+
+	/* Switch to MCDI polling on Siena before disabling interrupts */
+	efx_mcdi_mode_poll(efx);
+
 	/* Disable interrupts and wait for ISR to complete */
-	falcon_disable_interrupts(efx);
+	efx_nic_disable_interrupts(efx);
 	if (efx->legacy_irq)
 		synchronize_irq(efx->legacy_irq);
 	efx_for_each_channel(channel, efx) {
@@ -1173,15 +1275,9 @@
 	 * window to loose phy events */
 	efx_stop_port(efx);
 
-	/* Flush efx_phy_work, efx_mac_work, refill_workqueue, monitor_work */
+	/* Flush efx_mac_work(), refill_workqueue, monitor_work */
 	efx_flush_all(efx);
 
-	/* Isolate the MAC from the TX and RX engines, so that queue
-	 * flushes will complete in a timely fashion. */
-	falcon_deconfigure_mac_wrapper(efx);
-	msleep(10); /* Let the Rx FIFO drain */
-	falcon_drain_tx_fifo(efx);
-
 	/* Stop the kernel transmit interface late, so the watchdog
 	 * timer isn't ticking over the flush */
 	if (efx_dev_registered(efx)) {
@@ -1201,41 +1297,39 @@
 	efx_remove_nic(efx);
 }
 
-/* A convinience function to safely flush all the queues */
-void efx_flush_queues(struct efx_nic *efx)
-{
-	EFX_ASSERT_RESET_SERIALISED(efx);
-
-	efx_stop_all(efx);
-
-	efx_fini_channels(efx);
-	efx_init_channels(efx);
-
-	efx_start_all(efx);
-}
-
 /**************************************************************************
  *
  * Interrupt moderation
  *
  **************************************************************************/
 
+static unsigned irq_mod_ticks(int usecs, int resolution)
+{
+	if (usecs <= 0)
+		return 0; /* cannot receive interrupts ahead of time :-) */
+	if (usecs < resolution)
+		return 1; /* never round down to 0 */
+	return usecs / resolution;
+}
+
 /* Set interrupt moderation parameters */
 void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs,
 			     bool rx_adaptive)
 {
 	struct efx_tx_queue *tx_queue;
 	struct efx_rx_queue *rx_queue;
+	unsigned tx_ticks = irq_mod_ticks(tx_usecs, EFX_IRQ_MOD_RESOLUTION);
+	unsigned rx_ticks = irq_mod_ticks(rx_usecs, EFX_IRQ_MOD_RESOLUTION);
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
 	efx_for_each_tx_queue(tx_queue, efx)
-		tx_queue->channel->irq_moderation = tx_usecs;
+		tx_queue->channel->irq_moderation = tx_ticks;
 
 	efx->irq_rx_adaptive = rx_adaptive;
-	efx->irq_rx_moderation = rx_usecs;
+	efx->irq_rx_moderation = rx_ticks;
 	efx_for_each_rx_queue(rx_queue, efx)
-		rx_queue->channel->irq_moderation = rx_usecs;
+		rx_queue->channel->irq_moderation = rx_ticks;
 }
 
 /**************************************************************************
@@ -1250,10 +1344,10 @@
 {
 	struct efx_nic *efx = container_of(data, struct efx_nic,
 					   monitor_work.work);
-	int rc;
 
 	EFX_TRACE(efx, "hardware monitor executing on CPU %d\n",
 		  raw_smp_processor_id());
+	BUG_ON(efx->type->monitor == NULL);
 
 	/* If the mac_lock is already held then it is likely a port
 	 * reconfiguration is already in place, which will likely do
@@ -1262,15 +1356,7 @@
 		goto out_requeue;
 	if (!efx->port_enabled)
 		goto out_unlock;
-	rc = efx->board_info.monitor(efx);
-	if (rc) {
-		EFX_ERR(efx, "Board sensor %s; shutting down PHY\n",
-			(rc == -ERANGE) ? "reported fault" : "failed");
-		efx->phy_mode |= PHY_MODE_LOW_POWER;
-		falcon_sim_phy_event(efx);
-	}
-	efx->phy_op->poll(efx);
-	efx->mac_op->poll(efx);
+	efx->type->monitor(efx);
 
 out_unlock:
 	mutex_unlock(&efx->mac_lock);
@@ -1374,6 +1460,12 @@
 		return -EIO;
 	if (efx->phy_mode & PHY_MODE_SPECIAL)
 		return -EBUSY;
+	if (efx_mcdi_poll_reboot(efx) && efx_reset(efx, RESET_TYPE_ALL))
+		return -EIO;
+
+	/* Notify the kernel of the link state polled during driver load,
+	 * before the monitor starts running */
+	efx_link_status_changed(efx);
 
 	efx_start_all(efx);
 	return 0;
@@ -1400,20 +1492,6 @@
 	return 0;
 }
 
-void efx_stats_disable(struct efx_nic *efx)
-{
-	spin_lock(&efx->stats_lock);
-	++efx->stats_disable_count;
-	spin_unlock(&efx->stats_lock);
-}
-
-void efx_stats_enable(struct efx_nic *efx)
-{
-	spin_lock(&efx->stats_lock);
-	--efx->stats_disable_count;
-	spin_unlock(&efx->stats_lock);
-}
-
 /* Context: process, dev_base_lock or RTNL held, non-blocking. */
 static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
 {
@@ -1421,17 +1499,9 @@
 	struct efx_mac_stats *mac_stats = &efx->mac_stats;
 	struct net_device_stats *stats = &net_dev->stats;
 
-	/* Update stats if possible, but do not wait if another thread
-	 * is updating them or if MAC stats fetches are temporarily
-	 * disabled; slightly stale stats are acceptable.
-	 */
-	if (!spin_trylock(&efx->stats_lock))
-		return stats;
-	if (!efx->stats_disable_count) {
-		efx->mac_op->update_stats(efx);
-		falcon_update_nic_stats(efx);
-	}
-	spin_unlock(&efx->stats_lock);
+	spin_lock_bh(&efx->stats_lock);
+	efx->type->update_stats(efx);
+	spin_unlock_bh(&efx->stats_lock);
 
 	stats->rx_packets = mac_stats->rx_packets;
 	stats->tx_packets = mac_stats->tx_packets;
@@ -1490,7 +1560,14 @@
 	EFX_LOG(efx, "changing MTU to %d\n", new_mtu);
 
 	efx_fini_channels(efx);
+
+	mutex_lock(&efx->mac_lock);
+	/* Reconfigure the MAC before enabling the dma queues so that
+	 * the RX buffers don't overflow */
 	net_dev->mtu = new_mtu;
+	efx->mac_op->reconfigure(efx);
+	mutex_unlock(&efx->mac_lock);
+
 	efx_init_channels(efx);
 
 	efx_start_all(efx);
@@ -1514,7 +1591,9 @@
 	memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len);
 
 	/* Reconfigure the MAC */
-	efx_reconfigure_port(efx);
+	mutex_lock(&efx->mac_lock);
+	efx->mac_op->reconfigure(efx);
+	mutex_unlock(&efx->mac_lock);
 
 	return 0;
 }
@@ -1525,16 +1604,14 @@
 	struct efx_nic *efx = netdev_priv(net_dev);
 	struct dev_mc_list *mc_list = net_dev->mc_list;
 	union efx_multicast_hash *mc_hash = &efx->multicast_hash;
-	bool promiscuous = !!(net_dev->flags & IFF_PROMISC);
-	bool changed = (efx->promiscuous != promiscuous);
 	u32 crc;
 	int bit;
 	int i;
 
-	efx->promiscuous = promiscuous;
+	efx->promiscuous = !!(net_dev->flags & IFF_PROMISC);
 
 	/* Build multicast hash table */
-	if (promiscuous || (net_dev->flags & IFF_ALLMULTI)) {
+	if (efx->promiscuous || (net_dev->flags & IFF_ALLMULTI)) {
 		memset(mc_hash, 0xff, sizeof(*mc_hash));
 	} else {
 		memset(mc_hash, 0x00, sizeof(*mc_hash));
@@ -1544,17 +1621,17 @@
 			set_bit_le(bit, mc_hash->byte);
 			mc_list = mc_list->next;
 		}
+
+		/* Broadcast packets go through the multicast hash filter.
+		 * ether_crc_le() of the broadcast address is 0xbe2612ff
+		 * so we always add bit 0xff to the mask.
+		 */
+		set_bit_le(0xff, mc_hash->byte);
 	}
 
-	if (!efx->port_enabled)
-		/* Delay pushing settings until efx_start_port() */
-		return;
-
-	if (changed)
-		queue_work(efx->workqueue, &efx->phy_work);
-
-	/* Create and activate new global multicast hash table */
-	falcon_set_multicast_hash(efx);
+	if (efx->port_enabled)
+		queue_work(efx->workqueue, &efx->mac_work);
+	/* Otherwise efx_start_port() will do this */
 }
 
 static const struct net_device_ops efx_netdev_ops = {
@@ -1683,21 +1760,18 @@
 
 /* Tears down the entire software state and most of the hardware state
  * before reset.  */
-void efx_reset_down(struct efx_nic *efx, enum reset_type method,
-		    struct ethtool_cmd *ecmd)
+void efx_reset_down(struct efx_nic *efx, enum reset_type method)
 {
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
-	efx_stats_disable(efx);
 	efx_stop_all(efx);
 	mutex_lock(&efx->mac_lock);
 	mutex_lock(&efx->spi_lock);
 
-	efx->phy_op->get_settings(efx, ecmd);
-
 	efx_fini_channels(efx);
 	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
 		efx->phy_op->fini(efx);
+	efx->type->fini(efx);
 }
 
 /* This function will always ensure that the locks acquired in
@@ -1705,79 +1779,67 @@
  * that we were unable to reinitialise the hardware, and the
  * driver should be disabled. If ok is false, then the rx and tx
  * engines are not restarted, pending a RESET_DISABLE. */
-int efx_reset_up(struct efx_nic *efx, enum reset_type method,
-		 struct ethtool_cmd *ecmd, bool ok)
+int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
 {
 	int rc;
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
-	rc = falcon_init_nic(efx);
+	rc = efx->type->init(efx);
 	if (rc) {
 		EFX_ERR(efx, "failed to initialise NIC\n");
-		ok = false;
+		goto fail;
 	}
 
+	if (!ok)
+		goto fail;
+
 	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) {
-		if (ok) {
-			rc = efx->phy_op->init(efx);
-			if (rc)
-				ok = false;
-		}
-		if (!ok)
-			efx->port_initialized = false;
-	}
-
-	if (ok) {
-		efx_init_channels(efx);
-
-		if (efx->phy_op->set_settings(efx, ecmd))
+		rc = efx->phy_op->init(efx);
+		if (rc)
+			goto fail;
+		if (efx->phy_op->reconfigure(efx))
 			EFX_ERR(efx, "could not restore PHY settings\n");
 	}
 
+	efx->mac_op->reconfigure(efx);
+
+	efx_init_channels(efx);
+
 	mutex_unlock(&efx->spi_lock);
 	mutex_unlock(&efx->mac_lock);
 
-	if (ok) {
-		efx_start_all(efx);
-		efx_stats_enable(efx);
-	}
+	efx_start_all(efx);
+
+	return 0;
+
+fail:
+	efx->port_initialized = false;
+
+	mutex_unlock(&efx->spi_lock);
+	mutex_unlock(&efx->mac_lock);
+
 	return rc;
 }
 
-/* Reset the NIC as transparently as possible. Do not reset the PHY
- * Note that the reset may fail, in which case the card will be left
- * in a most-probably-unusable state.
+/* Reset the NIC using the specified method.  Note that the reset may
+ * fail, in which case the card will be left in an unusable state.
  *
- * This function will sleep.  You cannot reset from within an atomic
- * state; use efx_schedule_reset() instead.
- *
- * Grabs the rtnl_lock.
+ * Caller must hold the rtnl_lock.
  */
-static int efx_reset(struct efx_nic *efx)
+int efx_reset(struct efx_nic *efx, enum reset_type method)
 {
-	struct ethtool_cmd ecmd;
-	enum reset_type method = efx->reset_pending;
-	int rc = 0;
+	int rc, rc2;
+	bool disabled;
 
-	/* Serialise with kernel interfaces */
-	rtnl_lock();
+	EFX_INFO(efx, "resetting (%s)\n", RESET_TYPE(method));
 
-	/* If we're not RUNNING then don't reset. Leave the reset_pending
-	 * flag set so that efx_pci_probe_main will be retried */
-	if (efx->state != STATE_RUNNING) {
-		EFX_INFO(efx, "scheduled reset quenched. NIC not RUNNING\n");
-		goto out_unlock;
-	}
+	efx_reset_down(efx, method);
 
-	EFX_INFO(efx, "resetting (%d)\n", method);
-
-	efx_reset_down(efx, method, &ecmd);
-
-	rc = falcon_reset_hw(efx, method);
+	rc = efx->type->reset(efx, method);
 	if (rc) {
 		EFX_ERR(efx, "failed to reset hardware\n");
-		goto out_disable;
+		goto out;
 	}
 
 	/* Allow resets to be rescheduled. */
@@ -1789,25 +1851,22 @@
 	 * can respond to requests. */
 	pci_set_master(efx->pci_dev);
 
+out:
 	/* Leave device stopped if necessary */
-	if (method == RESET_TYPE_DISABLE) {
-		efx_reset_up(efx, method, &ecmd, false);
-		rc = -EIO;
-	} else {
-		rc = efx_reset_up(efx, method, &ecmd, true);
+	disabled = rc || method == RESET_TYPE_DISABLE;
+	rc2 = efx_reset_up(efx, method, !disabled);
+	if (rc2) {
+		disabled = true;
+		if (!rc)
+			rc = rc2;
 	}
 
-out_disable:
-	if (rc) {
+	if (disabled) {
 		EFX_ERR(efx, "has been disabled\n");
 		efx->state = STATE_DISABLED;
-		dev_close(efx->net_dev);
 	} else {
 		EFX_LOG(efx, "reset complete\n");
 	}
-
-out_unlock:
-	rtnl_unlock();
 	return rc;
 }
 
@@ -1816,9 +1875,19 @@
  */
 static void efx_reset_work(struct work_struct *data)
 {
-	struct efx_nic *nic = container_of(data, struct efx_nic, reset_work);
+	struct efx_nic *efx = container_of(data, struct efx_nic, reset_work);
 
-	efx_reset(nic);
+	/* If we're not RUNNING then don't reset. Leave the reset_pending
+	 * flag set so that efx_pci_probe_main will be retried */
+	if (efx->state != STATE_RUNNING) {
+		EFX_INFO(efx, "scheduled reset quenched. NIC not RUNNING\n");
+		return;
+	}
+
+	rtnl_lock();
+	if (efx_reset(efx, efx->reset_pending))
+		dev_close(efx->net_dev);
+	rtnl_unlock();
 }
 
 void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
@@ -1843,18 +1912,24 @@
 	case RESET_TYPE_TX_SKIP:
 		method = RESET_TYPE_INVISIBLE;
 		break;
+	case RESET_TYPE_MC_FAILURE:
 	default:
 		method = RESET_TYPE_ALL;
 		break;
 	}
 
 	if (method != type)
-		EFX_LOG(efx, "scheduling reset (%d:%d)\n", type, method);
+		EFX_LOG(efx, "scheduling %s reset for %s\n",
+			RESET_TYPE(method), RESET_TYPE(type));
 	else
-		EFX_LOG(efx, "scheduling reset (%d)\n", method);
+		EFX_LOG(efx, "scheduling %s reset\n", RESET_TYPE(method));
 
 	efx->reset_pending = method;
 
+	/* efx_process_channel() will no longer read events once a
+	 * reset is scheduled. So switch back to poll'd MCDI completions. */
+	efx_mcdi_mode_poll(efx);
+
 	queue_work(reset_workqueue, &efx->reset_work);
 }
 
@@ -1867,15 +1942,19 @@
 /* PCI device ID table */
 static struct pci_device_id efx_pci_table[] __devinitdata = {
 	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID),
-	 .driver_data = (unsigned long) &falcon_a_nic_type},
+	 .driver_data = (unsigned long) &falcon_a1_nic_type},
 	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID),
-	 .driver_data = (unsigned long) &falcon_b_nic_type},
+	 .driver_data = (unsigned long) &falcon_b0_nic_type},
+	{PCI_DEVICE(EFX_VENDID_SFC, BETHPAGE_A_P_DEVID),
+	 .driver_data = (unsigned long) &siena_a0_nic_type},
+	{PCI_DEVICE(EFX_VENDID_SFC, SIENA_A_P_DEVID),
+	 .driver_data = (unsigned long) &siena_a0_nic_type},
 	{0}			/* end of list */
 };
 
 /**************************************************************************
  *
- * Dummy PHY/MAC/Board operations
+ * Dummy PHY/MAC operations
  *
  * Can be used for some unimplemented operations
  * Needed so all function pointers are valid and do not have to be tested
@@ -1887,29 +1966,19 @@
 	return 0;
 }
 void efx_port_dummy_op_void(struct efx_nic *efx) {}
-void efx_port_dummy_op_blink(struct efx_nic *efx, bool blink) {}
-
-static struct efx_mac_operations efx_dummy_mac_operations = {
-	.reconfigure	= efx_port_dummy_op_void,
-	.poll		= efx_port_dummy_op_void,
-	.irq		= efx_port_dummy_op_void,
-};
+void efx_port_dummy_op_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
+{
+}
+bool efx_port_dummy_op_poll(struct efx_nic *efx)
+{
+	return false;
+}
 
 static struct efx_phy_operations efx_dummy_phy_operations = {
 	.init		 = efx_port_dummy_op_int,
-	.reconfigure	 = efx_port_dummy_op_void,
-	.poll		 = efx_port_dummy_op_void,
+	.reconfigure	 = efx_port_dummy_op_int,
+	.poll		 = efx_port_dummy_op_poll,
 	.fini		 = efx_port_dummy_op_void,
-	.clear_interrupt = efx_port_dummy_op_void,
-};
-
-static struct efx_board efx_dummy_board_info = {
-	.init		= efx_port_dummy_op_int,
-	.init_leds	= efx_port_dummy_op_void,
-	.set_id_led	= efx_port_dummy_op_blink,
-	.monitor	= efx_port_dummy_op_int,
-	.blink		= efx_port_dummy_op_blink,
-	.fini		= efx_port_dummy_op_void,
 };
 
 /**************************************************************************
@@ -1932,26 +2001,26 @@
 	/* Initialise common structures */
 	memset(efx, 0, sizeof(*efx));
 	spin_lock_init(&efx->biu_lock);
-	spin_lock_init(&efx->phy_lock);
+	mutex_init(&efx->mdio_lock);
 	mutex_init(&efx->spi_lock);
+#ifdef CONFIG_SFC_MTD
+	INIT_LIST_HEAD(&efx->mtd_list);
+#endif
 	INIT_WORK(&efx->reset_work, efx_reset_work);
 	INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor);
 	efx->pci_dev = pci_dev;
 	efx->state = STATE_INIT;
 	efx->reset_pending = RESET_TYPE_NONE;
 	strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
-	efx->board_info = efx_dummy_board_info;
 
 	efx->net_dev = net_dev;
 	efx->rx_checksum_enabled = true;
 	spin_lock_init(&efx->netif_stop_lock);
 	spin_lock_init(&efx->stats_lock);
-	efx->stats_disable_count = 1;
 	mutex_init(&efx->mac_lock);
-	efx->mac_op = &efx_dummy_mac_operations;
+	efx->mac_op = type->default_mac_ops;
 	efx->phy_op = &efx_dummy_phy_operations;
 	efx->mdio.dev = net_dev;
-	INIT_WORK(&efx->phy_work, efx_phy_work);
 	INIT_WORK(&efx->mac_work, efx_mac_work);
 	atomic_set(&efx->netif_stop_count, 1);
 
@@ -1981,17 +2050,9 @@
 
 	efx->type = type;
 
-	/* Sanity-check NIC type */
-	EFX_BUG_ON_PARANOID(efx->type->txd_ring_mask &
-			    (efx->type->txd_ring_mask + 1));
-	EFX_BUG_ON_PARANOID(efx->type->rxd_ring_mask &
-			    (efx->type->rxd_ring_mask + 1));
-	EFX_BUG_ON_PARANOID(efx->type->evq_size &
-			    (efx->type->evq_size - 1));
 	/* As close as we can get to guaranteeing that we don't overflow */
-	EFX_BUG_ON_PARANOID(efx->type->evq_size <
-			    (efx->type->txd_ring_mask + 1 +
-			     efx->type->rxd_ring_mask + 1));
+	BUILD_BUG_ON(EFX_EVQ_SIZE < EFX_TXQ_SIZE + EFX_RXQ_SIZE);
+
 	EFX_BUG_ON_PARANOID(efx->type->phys_addr_channels > EFX_MAX_CHANNELS);
 
 	/* Higher numbered interrupt modes are less capable! */
@@ -2027,19 +2088,10 @@
  */
 static void efx_pci_remove_main(struct efx_nic *efx)
 {
-	EFX_ASSERT_RESET_SERIALISED(efx);
-
-	/* Skip everything if we never obtained a valid membase */
-	if (!efx->membase)
-		return;
-
+	efx_nic_fini_interrupt(efx);
 	efx_fini_channels(efx);
 	efx_fini_port(efx);
-
-	/* Shutdown the board, then the NIC and board state */
-	efx->board_info.fini(efx);
-	falcon_fini_interrupt(efx);
-
+	efx->type->fini(efx);
 	efx_fini_napi(efx);
 	efx_remove_all(efx);
 }
@@ -2063,9 +2115,6 @@
 	/* Allow any queued efx_resets() to complete */
 	rtnl_unlock();
 
-	if (efx->membase == NULL)
-		goto out;
-
 	efx_unregister_netdev(efx);
 
 	efx_mtd_remove(efx);
@@ -2078,7 +2127,6 @@
 
 	efx_pci_remove_main(efx);
 
-out:
 	efx_fini_io(efx);
 	EFX_LOG(efx, "shutdown successful\n");
 
@@ -2103,39 +2151,31 @@
 	if (rc)
 		goto fail2;
 
-	/* Initialise the board */
-	rc = efx->board_info.init(efx);
-	if (rc) {
-		EFX_ERR(efx, "failed to initialise board\n");
-		goto fail3;
-	}
-
-	rc = falcon_init_nic(efx);
+	rc = efx->type->init(efx);
 	if (rc) {
 		EFX_ERR(efx, "failed to initialise NIC\n");
-		goto fail4;
+		goto fail3;
 	}
 
 	rc = efx_init_port(efx);
 	if (rc) {
 		EFX_ERR(efx, "failed to initialise port\n");
-		goto fail5;
+		goto fail4;
 	}
 
 	efx_init_channels(efx);
 
-	rc = falcon_init_interrupt(efx);
+	rc = efx_nic_init_interrupt(efx);
 	if (rc)
-		goto fail6;
+		goto fail5;
 
 	return 0;
 
- fail6:
+ fail5:
 	efx_fini_channels(efx);
 	efx_fini_port(efx);
- fail5:
  fail4:
-	efx->board_info.fini(efx);
+	efx->type->fini(efx);
  fail3:
 	efx_fini_napi(efx);
  fail2:
@@ -2165,9 +2205,11 @@
 	net_dev = alloc_etherdev(sizeof(*efx));
 	if (!net_dev)
 		return -ENOMEM;
-	net_dev->features |= (NETIF_F_IP_CSUM | NETIF_F_SG |
+	net_dev->features |= (type->offload_features | NETIF_F_SG |
 			      NETIF_F_HIGHDMA | NETIF_F_TSO |
 			      NETIF_F_GRO);
+	if (type->offload_features & NETIF_F_V6_CSUM)
+		net_dev->features |= NETIF_F_TSO6;
 	/* Mask for features that also apply to VLAN devices */
 	net_dev->vlan_features |= (NETIF_F_ALL_CSUM | NETIF_F_SG |
 				   NETIF_F_HIGHDMA | NETIF_F_TSO);
@@ -2219,18 +2261,19 @@
 		goto fail4;
 	}
 
-	/* Switch to the running state before we expose the device to
-	 * the OS.  This is to ensure that the initial gathering of
-	 * MAC stats succeeds. */
+	/* Switch to the running state before we expose the device to the OS,
+	 * so that dev_open()|efx_start_all() will actually start the device */
 	efx->state = STATE_RUNNING;
 
-	efx_mtd_probe(efx); /* allowed to fail */
-
 	rc = efx_register_netdev(efx);
 	if (rc)
 		goto fail5;
 
 	EFX_LOG(efx, "initialisation successful\n");
+
+	rtnl_lock();
+	efx_mtd_probe(efx); /* allowed to fail */
+	rtnl_unlock();
 	return 0;
 
  fail5:
@@ -2246,11 +2289,107 @@
 	return rc;
 }
 
+static int efx_pm_freeze(struct device *dev)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+
+	efx->state = STATE_FINI;
+
+	netif_device_detach(efx->net_dev);
+
+	efx_stop_all(efx);
+	efx_fini_channels(efx);
+
+	return 0;
+}
+
+static int efx_pm_thaw(struct device *dev)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+
+	efx->state = STATE_INIT;
+
+	efx_init_channels(efx);
+
+	mutex_lock(&efx->mac_lock);
+	efx->phy_op->reconfigure(efx);
+	mutex_unlock(&efx->mac_lock);
+
+	efx_start_all(efx);
+
+	netif_device_attach(efx->net_dev);
+
+	efx->state = STATE_RUNNING;
+
+	efx->type->resume_wol(efx);
+
+	return 0;
+}
+
+static int efx_pm_poweroff(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct efx_nic *efx = pci_get_drvdata(pci_dev);
+
+	efx->type->fini(efx);
+
+	efx->reset_pending = RESET_TYPE_NONE;
+
+	pci_save_state(pci_dev);
+	return pci_set_power_state(pci_dev, PCI_D3hot);
+}
+
+/* Used for both resume and restore */
+static int efx_pm_resume(struct device *dev)
+{
+	struct pci_dev *pci_dev = to_pci_dev(dev);
+	struct efx_nic *efx = pci_get_drvdata(pci_dev);
+	int rc;
+
+	rc = pci_set_power_state(pci_dev, PCI_D0);
+	if (rc)
+		return rc;
+	pci_restore_state(pci_dev);
+	rc = pci_enable_device(pci_dev);
+	if (rc)
+		return rc;
+	pci_set_master(efx->pci_dev);
+	rc = efx->type->reset(efx, RESET_TYPE_ALL);
+	if (rc)
+		return rc;
+	rc = efx->type->init(efx);
+	if (rc)
+		return rc;
+	efx_pm_thaw(dev);
+	return 0;
+}
+
+static int efx_pm_suspend(struct device *dev)
+{
+	int rc;
+
+	efx_pm_freeze(dev);
+	rc = efx_pm_poweroff(dev);
+	if (rc)
+		efx_pm_resume(dev);
+	return rc;
+}
+
+static struct dev_pm_ops efx_pm_ops = {
+	.suspend	= efx_pm_suspend,
+	.resume		= efx_pm_resume,
+	.freeze		= efx_pm_freeze,
+	.thaw		= efx_pm_thaw,
+	.poweroff	= efx_pm_poweroff,
+	.restore	= efx_pm_resume,
+};
+
 static struct pci_driver efx_pci_driver = {
 	.name		= EFX_DRIVER_NAME,
 	.id_table	= efx_pci_table,
 	.probe		= efx_pci_probe,
 	.remove		= efx_pci_remove,
+	.driver.pm	= &efx_pm_ops,
 };
 
 /**************************************************************************
@@ -2314,8 +2453,8 @@
 module_init(efx_init_module);
 module_exit(efx_exit_module);
 
-MODULE_AUTHOR("Michael Brown <mbrown@fensystems.co.uk> and "
-	      "Solarflare Communications");
+MODULE_AUTHOR("Solarflare Communications and "
+	      "Michael Brown <mbrown@fensystems.co.uk>");
 MODULE_DESCRIPTION("Solarflare Communications network driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, efx_pci_table);
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index aecaf62..a615ac0 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -18,35 +18,64 @@
 #define FALCON_A_P_DEVID	0x0703
 #define FALCON_A_S_DEVID        0x6703
 #define FALCON_B_P_DEVID        0x0710
+#define BETHPAGE_A_P_DEVID      0x0803
+#define SIENA_A_P_DEVID         0x0813
+
+/* Solarstorm controllers use BAR 0 for I/O space and BAR 2(&3) for memory */
+#define EFX_MEM_BAR 2
 
 /* TX */
-extern netdev_tx_t efx_xmit(struct efx_nic *efx,
-				  struct efx_tx_queue *tx_queue,
-				  struct sk_buff *skb);
+extern int efx_probe_tx_queue(struct efx_tx_queue *tx_queue);
+extern void efx_remove_tx_queue(struct efx_tx_queue *tx_queue);
+extern void efx_init_tx_queue(struct efx_tx_queue *tx_queue);
+extern void efx_fini_tx_queue(struct efx_tx_queue *tx_queue);
+extern void efx_release_tx_buffers(struct efx_tx_queue *tx_queue);
+extern netdev_tx_t
+efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev);
+extern netdev_tx_t
+efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb);
+extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
 extern void efx_stop_queue(struct efx_nic *efx);
 extern void efx_wake_queue(struct efx_nic *efx);
+#define EFX_TXQ_SIZE 1024
+#define EFX_TXQ_MASK (EFX_TXQ_SIZE - 1)
 
 /* RX */
-extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
+extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
+extern void efx_remove_rx_queue(struct efx_rx_queue *rx_queue);
+extern void efx_init_rx_queue(struct efx_rx_queue *rx_queue);
+extern void efx_fini_rx_queue(struct efx_rx_queue *rx_queue);
+extern void efx_rx_strategy(struct efx_channel *channel);
+extern void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue);
+extern void efx_rx_work(struct work_struct *data);
+extern void __efx_rx_packet(struct efx_channel *channel,
+			    struct efx_rx_buffer *rx_buf, bool checksummed);
 extern void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index,
 			  unsigned int len, bool checksummed, bool discard);
 extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay);
+#define EFX_RXQ_SIZE 1024
+#define EFX_RXQ_MASK (EFX_RXQ_SIZE - 1)
 
 /* Channels */
 extern void efx_process_channel_now(struct efx_channel *channel);
-extern void efx_flush_queues(struct efx_nic *efx);
+#define EFX_EVQ_SIZE 4096
+#define EFX_EVQ_MASK (EFX_EVQ_SIZE - 1)
 
 /* Ports */
-extern void efx_stats_disable(struct efx_nic *efx);
-extern void efx_stats_enable(struct efx_nic *efx);
-extern void efx_reconfigure_port(struct efx_nic *efx);
-extern void __efx_reconfigure_port(struct efx_nic *efx);
+extern int efx_reconfigure_port(struct efx_nic *efx);
+extern int __efx_reconfigure_port(struct efx_nic *efx);
+
+/* Ethtool support */
+extern int efx_ethtool_get_settings(struct net_device *net_dev,
+				    struct ethtool_cmd *ecmd);
+extern int efx_ethtool_set_settings(struct net_device *net_dev,
+				    struct ethtool_cmd *ecmd);
+extern const struct ethtool_ops efx_ethtool_ops;
 
 /* Reset handling */
-extern void efx_reset_down(struct efx_nic *efx, enum reset_type method,
-			   struct ethtool_cmd *ecmd);
-extern int efx_reset_up(struct efx_nic *efx, enum reset_type method,
-			struct ethtool_cmd *ecmd, bool ok);
+extern int efx_reset(struct efx_nic *efx, enum reset_type method);
+extern void efx_reset_down(struct efx_nic *efx, enum reset_type method);
+extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok);
 
 /* Global */
 extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type);
@@ -60,7 +89,9 @@
 /* Dummy PHY ops for PHY drivers */
 extern int efx_port_dummy_op_int(struct efx_nic *efx);
 extern void efx_port_dummy_op_void(struct efx_nic *efx);
-extern void efx_port_dummy_op_blink(struct efx_nic *efx, bool blink);
+extern void
+efx_port_dummy_op_set_id_led(struct efx_nic *efx, enum efx_led_mode mode);
+extern bool efx_port_dummy_op_poll(struct efx_nic *efx);
 
 /* MTD */
 #ifdef CONFIG_SFC_MTD
@@ -84,4 +115,8 @@
 	napi_schedule(&channel->napi_str);
 }
 
+extern void efx_link_status_changed(struct efx_nic *efx);
+extern void efx_link_set_advertising(struct efx_nic *efx, u32);
+extern void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type);
+
 #endif /* EFX_EFX_H */
diff --git a/drivers/net/sfc/enum.h b/drivers/net/sfc/enum.h
index 60cbc6e..384cfe3 100644
--- a/drivers/net/sfc/enum.h
+++ b/drivers/net/sfc/enum.h
@@ -1,6 +1,6 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
+ * Copyright 2007-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -13,44 +13,101 @@
 /**
  * enum efx_loopback_mode - loopback modes
  * @LOOPBACK_NONE: no loopback
- * @LOOPBACK_GMAC: loopback within GMAC at unspecified level
- * @LOOPBACK_XGMII: loopback within XMAC at XGMII level
- * @LOOPBACK_XGXS: loopback within XMAC at XGXS level
- * @LOOPBACK_XAUI: loopback within XMAC at XAUI level
+ * @LOOPBACK_DATA: data path loopback
+ * @LOOPBACK_GMAC: loopback within GMAC
+ * @LOOPBACK_XGMII: loopback after XMAC
+ * @LOOPBACK_XGXS: loopback within BPX after XGXS
+ * @LOOPBACK_XAUI: loopback within BPX before XAUI serdes
+ * @LOOPBACK_GMII: loopback within BPX after GMAC
+ * @LOOPBACK_SGMII: loopback within BPX within SGMII
+ * @LOOPBACK_XGBR: loopback within BPX within XGBR
+ * @LOOPBACK_XFI: loopback within BPX before XFI serdes
+ * @LOOPBACK_XAUI_FAR: loopback within BPX after XAUI serdes
+ * @LOOPBACK_GMII_FAR: loopback within BPX before SGMII
+ * @LOOPBACK_SGMII_FAR: loopback within BPX after SGMII
+ * @LOOPBACK_XFI_FAR: loopback after XFI serdes
  * @LOOPBACK_GPHY: loopback within 1G PHY at unspecified level
  * @LOOPBACK_PHYXS: loopback within 10G PHY at PHYXS level
  * @LOOPBACK_PCS: loopback within 10G PHY at PCS level
  * @LOOPBACK_PMAPMD: loopback within 10G PHY at PMAPMD level
- * @LOOPBACK_NETWORK: reflecting loopback (even further than furthest!)
+ * @LOOPBACK_XPORT: cross port loopback
+ * @LOOPBACK_XGMII_WS: wireside loopback excluding XMAC
+ * @LOOPBACK_XAUI_WS: wireside loopback within BPX within XAUI serdes
+ * @LOOPBACK_XAUI_WS_FAR: wireside loopback within BPX including XAUI serdes
+ * @LOOPBACK_XAUI_WS_NEAR: wireside loopback within BPX excluding XAUI serdes
+ * @LOOPBACK_GMII_WS: wireside loopback excluding GMAC
+ * @LOOPBACK_XFI_WS: wireside loopback excluding XFI serdes
+ * @LOOPBACK_XFI_WS_FAR: wireside loopback including XFI serdes
+ * @LOOPBACK_PHYXS_WS: wireside loopback within 10G PHY at PHYXS level
  */
-/* Please keep in order and up-to-date w.r.t the following two #defines */
+/* Please keep up-to-date w.r.t the following two #defines */
 enum efx_loopback_mode {
 	LOOPBACK_NONE = 0,
-	LOOPBACK_GMAC = 1,
-	LOOPBACK_XGMII = 2,
-	LOOPBACK_XGXS = 3,
-	LOOPBACK_XAUI = 4,
-	LOOPBACK_GPHY = 5,
-	LOOPBACK_PHYXS = 6,
-	LOOPBACK_PCS = 7,
-	LOOPBACK_PMAPMD = 8,
-	LOOPBACK_NETWORK = 9,
+	LOOPBACK_DATA = 1,
+	LOOPBACK_GMAC = 2,
+	LOOPBACK_XGMII = 3,
+	LOOPBACK_XGXS = 4,
+	LOOPBACK_XAUI = 5,
+	LOOPBACK_GMII = 6,
+	LOOPBACK_SGMII = 7,
+	LOOPBACK_XGBR = 8,
+	LOOPBACK_XFI = 9,
+	LOOPBACK_XAUI_FAR = 10,
+	LOOPBACK_GMII_FAR = 11,
+	LOOPBACK_SGMII_FAR = 12,
+	LOOPBACK_XFI_FAR = 13,
+	LOOPBACK_GPHY = 14,
+	LOOPBACK_PHYXS = 15,
+	LOOPBACK_PCS = 16,
+	LOOPBACK_PMAPMD = 17,
+	LOOPBACK_XPORT = 18,
+	LOOPBACK_XGMII_WS = 19,
+	LOOPBACK_XAUI_WS = 20,
+	LOOPBACK_XAUI_WS_FAR = 21,
+	LOOPBACK_XAUI_WS_NEAR = 22,
+	LOOPBACK_GMII_WS = 23,
+	LOOPBACK_XFI_WS = 24,
+	LOOPBACK_XFI_WS_FAR = 25,
+	LOOPBACK_PHYXS_WS = 26,
 	LOOPBACK_MAX
 };
-
 #define LOOPBACK_TEST_MAX LOOPBACK_PMAPMD
 
-extern const char *efx_loopback_mode_names[];
-#define LOOPBACK_MODE_NAME(mode)			\
-	STRING_TABLE_LOOKUP(mode, efx_loopback_mode)
-#define LOOPBACK_MODE(efx)				\
-	LOOPBACK_MODE_NAME(efx->loopback_mode)
-
 /* These loopbacks occur within the controller */
-#define LOOPBACKS_INTERNAL ((1 << LOOPBACK_GMAC) |     \
-			    (1 << LOOPBACK_XGMII)|     \
-			    (1 << LOOPBACK_XGXS) |     \
-			    (1 << LOOPBACK_XAUI))
+#define LOOPBACKS_INTERNAL ((1 << LOOPBACK_DATA) |		\
+			    (1 << LOOPBACK_GMAC) |		\
+			    (1 << LOOPBACK_XGMII)|		\
+			    (1 << LOOPBACK_XGXS) |		\
+			    (1 << LOOPBACK_XAUI) |		\
+			    (1 << LOOPBACK_GMII) |		\
+			    (1 << LOOPBACK_SGMII) |		\
+			    (1 << LOOPBACK_SGMII) |		\
+			    (1 << LOOPBACK_XGBR) |		\
+			    (1 << LOOPBACK_XFI) |		\
+			    (1 << LOOPBACK_XAUI_FAR) |		\
+			    (1 << LOOPBACK_GMII_FAR) |		\
+			    (1 << LOOPBACK_SGMII_FAR) |		\
+			    (1 << LOOPBACK_XFI_FAR) |		\
+			    (1 << LOOPBACK_XGMII_WS) |		\
+			    (1 << LOOPBACK_XAUI_WS) |		\
+			    (1 << LOOPBACK_XAUI_WS_FAR) |	\
+			    (1 << LOOPBACK_XAUI_WS_NEAR) |	\
+			    (1 << LOOPBACK_GMII_WS) |		\
+			    (1 << LOOPBACK_XFI_WS) |		\
+			    (1 << LOOPBACK_XFI_WS_FAR))
+
+#define LOOPBACKS_WS ((1 << LOOPBACK_XGMII_WS) |		\
+		      (1 << LOOPBACK_XAUI_WS) |			\
+		      (1 << LOOPBACK_XAUI_WS_FAR) |		\
+		      (1 << LOOPBACK_XAUI_WS_NEAR) |		\
+		      (1 << LOOPBACK_GMII_WS) |			\
+		      (1 << LOOPBACK_XFI_WS) |			\
+		      (1 << LOOPBACK_XFI_WS_FAR) |		\
+		      (1 << LOOPBACK_PHYXS_WS))
+
+#define LOOPBACKS_EXTERNAL(_efx)					\
+	((_efx)->loopback_modes & ~LOOPBACKS_INTERNAL &			\
+	 ~(1 << LOOPBACK_NONE))
 
 #define LOOPBACK_MASK(_efx)			\
 	(1 << (_efx)->loopback_mode)
@@ -58,6 +115,9 @@
 #define LOOPBACK_INTERNAL(_efx)				\
 	(!!(LOOPBACKS_INTERNAL & LOOPBACK_MASK(_efx)))
 
+#define LOOPBACK_EXTERNAL(_efx)				\
+	(!!(LOOPBACK_MASK(_efx) & LOOPBACKS_EXTERNAL(_efx)))
+
 #define LOOPBACK_CHANGED(_from, _to, _mask)				\
 	(!!((LOOPBACK_MASK(_from) ^ LOOPBACK_MASK(_to)) & (_mask)))
 
@@ -84,6 +144,7 @@
  * @RESET_TYPE_RX_DESC_FETCH: pcie error during rx descriptor fetch
  * @RESET_TYPE_TX_DESC_FETCH: pcie error during tx descriptor fetch
  * @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors
+ * @RESET_TYPE_MC_FAILURE: MC reboot/assertion
  */
 enum reset_type {
 	RESET_TYPE_NONE = -1,
@@ -98,6 +159,7 @@
 	RESET_TYPE_RX_DESC_FETCH,
 	RESET_TYPE_TX_DESC_FETCH,
 	RESET_TYPE_TX_SKIP,
+	RESET_TYPE_MC_FAILURE,
 	RESET_TYPE_MAX,
 };
 
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 45018f2..6c0bbed 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -10,30 +10,15 @@
 
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/mdio.h>
 #include <linux/rtnetlink.h>
 #include "net_driver.h"
 #include "workarounds.h"
 #include "selftest.h"
 #include "efx.h"
-#include "ethtool.h"
-#include "falcon.h"
+#include "nic.h"
 #include "spi.h"
 #include "mdio_10g.h"
 
-const char *efx_loopback_mode_names[] = {
-	[LOOPBACK_NONE]		= "NONE",
-	[LOOPBACK_GMAC]		= "GMAC",
-	[LOOPBACK_XGMII]	= "XGMII",
-	[LOOPBACK_XGXS]		= "XGXS",
-	[LOOPBACK_XAUI] 	= "XAUI",
-	[LOOPBACK_GPHY]		= "GPHY",
-	[LOOPBACK_PHYXS]	= "PHYXS",
-	[LOOPBACK_PCS]	 	= "PCS",
-	[LOOPBACK_PMAPMD]	= "PMA/PMD",
-	[LOOPBACK_NETWORK]	= "NETWORK",
-};
-
 struct ethtool_string {
 	char name[ETH_GSTRING_LEN];
 };
@@ -167,6 +152,7 @@
 	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_tobe_disc),
 	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_ip_hdr_chksum_err),
 	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_tcp_udp_chksum_err),
+	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_mcast_mismatch),
 	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_frm_trunc),
 };
 
@@ -187,13 +173,15 @@
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 
-	efx->board_info.blink(efx, 1);
-	set_current_state(TASK_INTERRUPTIBLE);
-	if (count)
-		schedule_timeout(count * HZ);
-	else
-		schedule();
-	efx->board_info.blink(efx, 0);
+	do {
+		efx->type->set_id_led(efx, EFX_LED_ON);
+		schedule_timeout_interruptible(HZ / 2);
+
+		efx->type->set_id_led(efx, EFX_LED_OFF);
+		schedule_timeout_interruptible(HZ / 2);
+	} while (!signal_pending(current) && --count != 0);
+
+	efx->type->set_id_led(efx, EFX_LED_DEFAULT);
 	return 0;
 }
 
@@ -202,6 +190,7 @@
 			     struct ethtool_cmd *ecmd)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	struct efx_link_state *link_state = &efx->link_state;
 
 	mutex_lock(&efx->mac_lock);
 	efx->phy_op->get_settings(efx, ecmd);
@@ -209,6 +198,13 @@
 
 	/* Falcon GMAC does not support 1000Mbps HD */
 	ecmd->supported &= ~SUPPORTED_1000baseT_Half;
+	/* Both MACs support pause frames (bidirectional and respond-only) */
+	ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+
+	if (LOOPBACK_INTERNAL(efx)) {
+		ecmd->speed = link_state->speed;
+		ecmd->duplex = link_state->fd ? DUPLEX_FULL : DUPLEX_HALF;
+	}
 
 	return 0;
 }
@@ -230,9 +226,6 @@
 	mutex_lock(&efx->mac_lock);
 	rc = efx->phy_op->set_settings(efx, ecmd);
 	mutex_unlock(&efx->mac_lock);
-	if (!rc)
-		efx_reconfigure_port(efx);
-
 	return rc;
 }
 
@@ -243,6 +236,9 @@
 
 	strlcpy(info->driver, EFX_DRIVER_NAME, sizeof(info->driver));
 	strlcpy(info->version, EFX_DRIVER_VERSION, sizeof(info->version));
+	if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0)
+		siena_print_fwver(efx, info->fw_version,
+				  sizeof(info->fw_version));
 	strlcpy(info->bus_info, pci_name(efx->pci_dev), sizeof(info->bus_info));
 }
 
@@ -289,7 +285,7 @@
 #define EFX_TX_QUEUE_NAME(_tx_queue) "txq%d", _tx_queue->queue
 #define EFX_RX_QUEUE_NAME(_rx_queue) "rxq%d", _rx_queue->queue
 #define EFX_LOOPBACK_NAME(_mode, _counter)			\
-	"loopback.%s." _counter, LOOPBACK_MODE_NAME(mode)
+	"loopback.%s." _counter, STRING_TABLE_LOOKUP(_mode, efx_loopback_mode)
 
 /**
  * efx_fill_loopback_test - fill in a block of loopback self-test entries
@@ -372,9 +368,21 @@
 	efx_fill_test(n++, strings, data, &tests->registers,
 		      "core", 0, "registers", NULL);
 
-	for (i = 0; i < efx->phy_op->num_tests; i++)
-		efx_fill_test(n++, strings, data, &tests->phy[i],
-			      "phy", 0, efx->phy_op->test_names[i], NULL);
+	if (efx->phy_op->run_tests != NULL) {
+		EFX_BUG_ON_PARANOID(efx->phy_op->test_name == NULL);
+
+		for (i = 0; true; ++i) {
+			const char *name;
+
+			EFX_BUG_ON_PARANOID(i >= EFX_MAX_PHY_TESTS);
+			name = efx->phy_op->test_name(efx, i);
+			if (name == NULL)
+				break;
+
+			efx_fill_test(n++, strings, data, &tests->phy[i],
+				      "phy", 0, name, NULL);
+		}
+	}
 
 	/* Loopback tests */
 	for (mode = LOOPBACK_NONE; mode <= LOOPBACK_TEST_MAX; mode++) {
@@ -463,6 +471,36 @@
 	}
 }
 
+static int efx_ethtool_set_tso(struct net_device *net_dev, u32 enable)
+{
+	struct efx_nic *efx __attribute__ ((unused)) = netdev_priv(net_dev);
+	unsigned long features;
+
+	features = NETIF_F_TSO;
+	if (efx->type->offload_features & NETIF_F_V6_CSUM)
+		features |= NETIF_F_TSO6;
+
+	if (enable)
+		net_dev->features |= features;
+	else
+		net_dev->features &= ~features;
+
+	return 0;
+}
+
+static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	unsigned long features = efx->type->offload_features & NETIF_F_ALL_CSUM;
+
+	if (enable)
+		net_dev->features |= features;
+	else
+		net_dev->features &= ~features;
+
+	return 0;
+}
+
 static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
@@ -537,7 +575,7 @@
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 
-	return efx->link_up;
+	return efx->link_state.up;
 }
 
 static int efx_ethtool_get_eeprom_len(struct net_device *net_dev)
@@ -562,7 +600,8 @@
 	rc = mutex_lock_interruptible(&efx->spi_lock);
 	if (rc)
 		return rc;
-	rc = falcon_spi_read(spi, eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
+	rc = falcon_spi_read(efx, spi,
+			     eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
 			     eeprom->len, &len, buf);
 	mutex_unlock(&efx->spi_lock);
 
@@ -585,7 +624,8 @@
 	rc = mutex_lock_interruptible(&efx->spi_lock);
 	if (rc)
 		return rc;
-	rc = falcon_spi_write(spi, eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
+	rc = falcon_spi_write(efx, spi,
+			      eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
 			      eeprom->len, &len, buf);
 	mutex_unlock(&efx->spi_lock);
 
@@ -618,6 +658,9 @@
 	coalesce->use_adaptive_rx_coalesce = efx->irq_rx_adaptive;
 	coalesce->rx_coalesce_usecs_irq = efx->irq_rx_moderation;
 
+	coalesce->tx_coalesce_usecs_irq *= EFX_IRQ_MOD_RESOLUTION;
+	coalesce->rx_coalesce_usecs_irq *= EFX_IRQ_MOD_RESOLUTION;
+
 	return 0;
 }
 
@@ -656,13 +699,8 @@
 	}
 
 	efx_init_irq_moderation(efx, tx_usecs, rx_usecs, adaptive);
-
-	/* Reset channel to pick up new moderation value.  Note that
-	 * this may change the value of the irq_moderation field
-	 * (e.g. to allow for hardware timer granularity).
-	 */
 	efx_for_each_channel(channel, efx)
-		falcon_set_int_moderation(channel);
+		efx->type->push_irq_moderation(channel);
 
 	return 0;
 }
@@ -671,8 +709,12 @@
 				      struct ethtool_pauseparam *pause)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
-	enum efx_fc_type wanted_fc;
+	enum efx_fc_type wanted_fc, old_fc;
+	u32 old_adv;
 	bool reset;
+	int rc = 0;
+
+	mutex_lock(&efx->mac_lock);
 
 	wanted_fc = ((pause->rx_pause ? EFX_FC_RX : 0) |
 		     (pause->tx_pause ? EFX_FC_TX : 0) |
@@ -680,14 +722,14 @@
 
 	if ((wanted_fc & EFX_FC_TX) && !(wanted_fc & EFX_FC_RX)) {
 		EFX_LOG(efx, "Flow control unsupported: tx ON rx OFF\n");
-		return -EINVAL;
+		rc = -EINVAL;
+		goto out;
 	}
 
-	if (!(efx->phy_op->mmds & MDIO_DEVS_AN) &&
-	    (wanted_fc & EFX_FC_AUTO)) {
-		EFX_LOG(efx, "PHY does not support flow control "
-			"autonegotiation\n");
-		return -EINVAL;
+	if ((wanted_fc & EFX_FC_AUTO) && !efx->link_advertising) {
+		EFX_LOG(efx, "Autonegotiation is disabled\n");
+		rc = -EINVAL;
+		goto out;
 	}
 
 	/* TX flow control may automatically turn itself off if the
@@ -697,27 +739,40 @@
 	 * and fix it be cycling transmit flow control on this end. */
 	reset = (wanted_fc & EFX_FC_TX) && !(efx->wanted_fc & EFX_FC_TX);
 	if (EFX_WORKAROUND_11482(efx) && reset) {
-		if (falcon_rev(efx) >= FALCON_REV_B0) {
+		if (efx_nic_rev(efx) == EFX_REV_FALCON_B0) {
 			/* Recover by resetting the EM block */
-			if (efx->link_up)
-				falcon_drain_tx_fifo(efx);
+			falcon_stop_nic_stats(efx);
+			falcon_drain_tx_fifo(efx);
+			efx->mac_op->reconfigure(efx);
+			falcon_start_nic_stats(efx);
 		} else {
 			/* Schedule a reset to recover */
 			efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
 		}
 	}
 
-	/* Try to push the pause parameters */
-	mutex_lock(&efx->mac_lock);
+	old_adv = efx->link_advertising;
+	old_fc = efx->wanted_fc;
+	efx_link_set_wanted_fc(efx, wanted_fc);
+	if (efx->link_advertising != old_adv ||
+	    (efx->wanted_fc ^ old_fc) & EFX_FC_AUTO) {
+		rc = efx->phy_op->reconfigure(efx);
+		if (rc) {
+			EFX_ERR(efx, "Unable to advertise requested flow "
+				"control setting\n");
+			goto out;
+		}
+	}
 
-	efx->wanted_fc = wanted_fc;
-	if (efx->phy_op->mmds & MDIO_DEVS_AN)
-		mdio45_ethtool_spauseparam_an(&efx->mdio, pause);
-	__efx_reconfigure_port(efx);
+	/* Reconfigure the MAC. The PHY *may* generate a link state change event
+	 * if the user just changed the advertised capabilities, but there's no
+	 * harm doing this twice */
+	efx->mac_op->reconfigure(efx);
 
+out:
 	mutex_unlock(&efx->mac_lock);
 
-	return 0;
+	return rc;
 }
 
 static void efx_ethtool_get_pauseparam(struct net_device *net_dev,
@@ -731,6 +786,50 @@
 }
 
 
+static void efx_ethtool_get_wol(struct net_device *net_dev,
+				struct ethtool_wolinfo *wol)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	return efx->type->get_wol(efx, wol);
+}
+
+
+static int efx_ethtool_set_wol(struct net_device *net_dev,
+			       struct ethtool_wolinfo *wol)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	return efx->type->set_wol(efx, wol->wolopts);
+}
+
+extern int efx_ethtool_reset(struct net_device *net_dev, u32 *flags)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	enum reset_type method;
+	enum {
+		ETH_RESET_EFX_INVISIBLE = (ETH_RESET_DMA | ETH_RESET_FILTER |
+					   ETH_RESET_OFFLOAD | ETH_RESET_MAC)
+	};
+
+	/* Check for minimal reset flags */
+	if ((*flags & ETH_RESET_EFX_INVISIBLE) != ETH_RESET_EFX_INVISIBLE)
+		return -EINVAL;
+	*flags ^= ETH_RESET_EFX_INVISIBLE;
+	method = RESET_TYPE_INVISIBLE;
+
+	if (*flags & ETH_RESET_PHY) {
+		*flags ^= ETH_RESET_PHY;
+		method = RESET_TYPE_ALL;
+	}
+
+	if ((*flags & efx->type->reset_world_flags) ==
+	    efx->type->reset_world_flags) {
+		*flags ^= efx->type->reset_world_flags;
+		method = RESET_TYPE_WORLD;
+	}
+
+	return efx_reset(efx, method);
+}
+
 const struct ethtool_ops efx_ethtool_ops = {
 	.get_settings		= efx_ethtool_get_settings,
 	.set_settings		= efx_ethtool_set_settings,
@@ -747,11 +846,13 @@
 	.get_rx_csum		= efx_ethtool_get_rx_csum,
 	.set_rx_csum		= efx_ethtool_set_rx_csum,
 	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_csum,
+	/* Need to enable/disable IPv6 too */
+	.set_tx_csum		= efx_ethtool_set_tx_csum,
 	.get_sg			= ethtool_op_get_sg,
 	.set_sg			= ethtool_op_set_sg,
 	.get_tso		= ethtool_op_get_tso,
-	.set_tso		= ethtool_op_set_tso,
+	/* Need to enable/disable TSO-IPv6 too */
+	.set_tso		= efx_ethtool_set_tso,
 	.get_flags		= ethtool_op_get_flags,
 	.set_flags		= ethtool_op_set_flags,
 	.get_sset_count		= efx_ethtool_get_sset_count,
@@ -759,4 +860,7 @@
 	.get_strings		= efx_ethtool_get_strings,
 	.phys_id		= efx_ethtool_phys_id,
 	.get_ethtool_stats	= efx_ethtool_get_stats,
+	.get_wol                = efx_ethtool_get_wol,
+	.set_wol                = efx_ethtool_set_wol,
+	.reset			= efx_ethtool_reset,
 };
diff --git a/drivers/net/sfc/ethtool.h b/drivers/net/sfc/ethtool.h
deleted file mode 100644
index 295ead4..0000000
--- a/drivers/net/sfc/ethtool.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005 Fen Systems Ltd.
- * Copyright 2006 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_ETHTOOL_H
-#define EFX_ETHTOOL_H
-
-#include "net_driver.h"
-
-/*
- * Ethtool support
- */
-
-extern int efx_ethtool_get_settings(struct net_device *net_dev,
-				    struct ethtool_cmd *ecmd);
-extern int efx_ethtool_set_settings(struct net_device *net_dev,
-				    struct ethtool_cmd *ecmd);
-
-extern const struct ethtool_ops efx_ethtool_ops;
-
-#endif /* EFX_ETHTOOL_H */
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index c049364..17afcd2 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -14,66 +14,20 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
 #include <linux/mii.h>
 #include "net_driver.h"
 #include "bitfield.h"
 #include "efx.h"
 #include "mac.h"
 #include "spi.h"
-#include "falcon.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
+#include "nic.h"
+#include "regs.h"
+#include "io.h"
 #include "mdio_10g.h"
 #include "phy.h"
-#include "boards.h"
 #include "workarounds.h"
 
-/* Falcon hardware control.
- * Falcon is the internal codename for the SFC4000 controller that is
- * present in SFE400X evaluation boards
- */
-
-/**
- * struct falcon_nic_data - Falcon NIC state
- * @next_buffer_table: First available buffer table id
- * @pci_dev2: The secondary PCI device if present
- * @i2c_data: Operations and state for I2C bit-bashing algorithm
- * @int_error_count: Number of internal errors seen recently
- * @int_error_expire: Time at which error count will be expired
- */
-struct falcon_nic_data {
-	unsigned next_buffer_table;
-	struct pci_dev *pci_dev2;
-	struct i2c_algo_bit_data i2c_data;
-
-	unsigned int_error_count;
-	unsigned long int_error_expire;
-};
-
-/**************************************************************************
- *
- * Configurable values
- *
- **************************************************************************
- */
-
-static int disable_dma_stats;
-
-/* This is set to 16 for a good reason.  In summary, if larger than
- * 16, the descriptor cache holds more than a default socket
- * buffer's worth of packets (for UDP we can only have at most one
- * socket buffer's worth outstanding).  This combined with the fact
- * that we only get 1 TX event per descriptor cache means the NIC
- * goes idle.
- */
-#define TX_DC_ENTRIES 16
-#define TX_DC_ENTRIES_ORDER 0
-#define TX_DC_BASE 0x130000
-
-#define RX_DC_ENTRIES 64
-#define RX_DC_ENTRIES_ORDER 2
-#define RX_DC_BASE 0x100000
+/* Hardware control for SFC4000 (aka Falcon). */
 
 static const unsigned int
 /* "Large" EEPROM device: Atmel AT25640 or similar
@@ -89,104 +43,6 @@
 		      | (15 << SPI_DEV_TYPE_ERASE_SIZE_LBN)
 		      | (8 << SPI_DEV_TYPE_BLOCK_SIZE_LBN));
 
-/* RX FIFO XOFF watermark
- *
- * When the amount of the RX FIFO increases used increases past this
- * watermark send XOFF. Only used if RX flow control is enabled (ethtool -A)
- * This also has an effect on RX/TX arbitration
- */
-static int rx_xoff_thresh_bytes = -1;
-module_param(rx_xoff_thresh_bytes, int, 0644);
-MODULE_PARM_DESC(rx_xoff_thresh_bytes, "RX fifo XOFF threshold");
-
-/* RX FIFO XON watermark
- *
- * When the amount of the RX FIFO used decreases below this
- * watermark send XON. Only used if TX flow control is enabled (ethtool -A)
- * This also has an effect on RX/TX arbitration
- */
-static int rx_xon_thresh_bytes = -1;
-module_param(rx_xon_thresh_bytes, int, 0644);
-MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold");
-
-/* TX descriptor ring size - min 512 max 4k */
-#define FALCON_TXD_RING_ORDER TX_DESCQ_SIZE_1K
-#define FALCON_TXD_RING_SIZE 1024
-#define FALCON_TXD_RING_MASK (FALCON_TXD_RING_SIZE - 1)
-
-/* RX descriptor ring size - min 512 max 4k */
-#define FALCON_RXD_RING_ORDER RX_DESCQ_SIZE_1K
-#define FALCON_RXD_RING_SIZE 1024
-#define FALCON_RXD_RING_MASK (FALCON_RXD_RING_SIZE - 1)
-
-/* Event queue size - max 32k */
-#define FALCON_EVQ_ORDER EVQ_SIZE_4K
-#define FALCON_EVQ_SIZE 4096
-#define FALCON_EVQ_MASK (FALCON_EVQ_SIZE - 1)
-
-/* If FALCON_MAX_INT_ERRORS internal errors occur within
- * FALCON_INT_ERROR_EXPIRE seconds, we consider the NIC broken and
- * disable it.
- */
-#define FALCON_INT_ERROR_EXPIRE 3600
-#define FALCON_MAX_INT_ERRORS 5
-
-/* We poll for events every FLUSH_INTERVAL ms, and check FLUSH_POLL_COUNT times
- */
-#define FALCON_FLUSH_INTERVAL 10
-#define FALCON_FLUSH_POLL_COUNT 100
-
-/**************************************************************************
- *
- * Falcon constants
- *
- **************************************************************************
- */
-
-/* DMA address mask */
-#define FALCON_DMA_MASK DMA_BIT_MASK(46)
-
-/* TX DMA length mask (13-bit) */
-#define FALCON_TX_DMA_MASK (4096 - 1)
-
-/* Size and alignment of special buffers (4KB) */
-#define FALCON_BUF_SIZE 4096
-
-/* Dummy SRAM size code */
-#define SRM_NB_BSZ_ONCHIP_ONLY (-1)
-
-#define FALCON_IS_DUAL_FUNC(efx)		\
-	(falcon_rev(efx) < FALCON_REV_B0)
-
-/**************************************************************************
- *
- * Falcon hardware access
- *
- **************************************************************************/
-
-/* Read the current event from the event queue */
-static inline efx_qword_t *falcon_event(struct efx_channel *channel,
-					unsigned int index)
-{
-	return (((efx_qword_t *) (channel->eventq.addr)) + index);
-}
-
-/* See if an event is present
- *
- * We check both the high and low dword of the event for all ones.  We
- * wrote all ones when we cleared the event, and no valid event can
- * have all ones in either its high or low dwords.  This approach is
- * robust against reordering.
- *
- * Note that using a single 64-bit comparison is incorrect; even
- * though the CPU read will be atomic, the DMA write may not be.
- */
-static inline int falcon_event_present(efx_qword_t *event)
-{
-	return (!(EFX_DWORD_IS_ALL_ONES(event->dword[0]) |
-		  EFX_DWORD_IS_ALL_ONES(event->dword[1])));
-}
-
 /**************************************************************************
  *
  * I2C bus - this is a bit-bashing interface using GPIO pins
@@ -200,9 +56,9 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, !state);
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN, !state);
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
 }
 
 static void falcon_setscl(void *data, int state)
@@ -210,9 +66,9 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, !state);
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO0_OEN, !state);
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
 }
 
 static int falcon_getsda(void *data)
@@ -220,8 +76,8 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	return EFX_OWORD_FIELD(reg, GPIO3_IN);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	return EFX_OWORD_FIELD(reg, FRF_AB_GPIO3_IN);
 }
 
 static int falcon_getscl(void *data)
@@ -229,8 +85,8 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	return EFX_OWORD_FIELD(reg, GPIO0_IN);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	return EFX_OWORD_FIELD(reg, FRF_AB_GPIO0_IN);
 }
 
 static struct i2c_algo_bit_data falcon_i2c_bit_operations = {
@@ -243,1115 +99,39 @@
 	.timeout	= DIV_ROUND_UP(HZ, 20),
 };
 
-/**************************************************************************
- *
- * Falcon special buffer handling
- * Special buffers are used for event queues and the TX and RX
- * descriptor rings.
- *
- *************************************************************************/
-
-/*
- * Initialise a Falcon special buffer
- *
- * This will define a buffer (previously allocated via
- * falcon_alloc_special_buffer()) in Falcon's buffer table, allowing
- * it to be used for event queues, descriptor rings etc.
- */
-static void
-falcon_init_special_buffer(struct efx_nic *efx,
-			   struct efx_special_buffer *buffer)
-{
-	efx_qword_t buf_desc;
-	int index;
-	dma_addr_t dma_addr;
-	int i;
-
-	EFX_BUG_ON_PARANOID(!buffer->addr);
-
-	/* Write buffer descriptors to NIC */
-	for (i = 0; i < buffer->entries; i++) {
-		index = buffer->index + i;
-		dma_addr = buffer->dma_addr + (i * 4096);
-		EFX_LOG(efx, "mapping special buffer %d at %llx\n",
-			index, (unsigned long long)dma_addr);
-		EFX_POPULATE_QWORD_4(buf_desc,
-				     IP_DAT_BUF_SIZE, IP_DAT_BUF_SIZE_4K,
-				     BUF_ADR_REGION, 0,
-				     BUF_ADR_FBUF, (dma_addr >> 12),
-				     BUF_OWNER_ID_FBUF, 0);
-		falcon_write_sram(efx, &buf_desc, index);
-	}
-}
-
-/* Unmaps a buffer from Falcon and clears the buffer table entries */
-static void
-falcon_fini_special_buffer(struct efx_nic *efx,
-			   struct efx_special_buffer *buffer)
-{
-	efx_oword_t buf_tbl_upd;
-	unsigned int start = buffer->index;
-	unsigned int end = (buffer->index + buffer->entries - 1);
-
-	if (!buffer->entries)
-		return;
-
-	EFX_LOG(efx, "unmapping special buffers %d-%d\n",
-		buffer->index, buffer->index + buffer->entries - 1);
-
-	EFX_POPULATE_OWORD_4(buf_tbl_upd,
-			     BUF_UPD_CMD, 0,
-			     BUF_CLR_CMD, 1,
-			     BUF_CLR_END_ID, end,
-			     BUF_CLR_START_ID, start);
-	falcon_write(efx, &buf_tbl_upd, BUF_TBL_UPD_REG_KER);
-}
-
-/*
- * Allocate a new Falcon special buffer
- *
- * This allocates memory for a new buffer, clears it and allocates a
- * new buffer ID range.  It does not write into Falcon's buffer table.
- *
- * This call will allocate 4KB buffers, since Falcon can't use 8KB
- * buffers for event queues and descriptor rings.
- */
-static int falcon_alloc_special_buffer(struct efx_nic *efx,
-				       struct efx_special_buffer *buffer,
-				       unsigned int len)
-{
-	struct falcon_nic_data *nic_data = efx->nic_data;
-
-	len = ALIGN(len, FALCON_BUF_SIZE);
-
-	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
-					    &buffer->dma_addr);
-	if (!buffer->addr)
-		return -ENOMEM;
-	buffer->len = len;
-	buffer->entries = len / FALCON_BUF_SIZE;
-	BUG_ON(buffer->dma_addr & (FALCON_BUF_SIZE - 1));
-
-	/* All zeros is a potentially valid event so memset to 0xff */
-	memset(buffer->addr, 0xff, len);
-
-	/* Select new buffer ID */
-	buffer->index = nic_data->next_buffer_table;
-	nic_data->next_buffer_table += buffer->entries;
-
-	EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x "
-		"(virt %p phys %llx)\n", buffer->index,
-		buffer->index + buffer->entries - 1,
-		(u64)buffer->dma_addr, len,
-		buffer->addr, (u64)virt_to_phys(buffer->addr));
-
-	return 0;
-}
-
-static void falcon_free_special_buffer(struct efx_nic *efx,
-				       struct efx_special_buffer *buffer)
-{
-	if (!buffer->addr)
-		return;
-
-	EFX_LOG(efx, "deallocating special buffers %d-%d at %llx+%x "
-		"(virt %p phys %llx)\n", buffer->index,
-		buffer->index + buffer->entries - 1,
-		(u64)buffer->dma_addr, buffer->len,
-		buffer->addr, (u64)virt_to_phys(buffer->addr));
-
-	pci_free_consistent(efx->pci_dev, buffer->len, buffer->addr,
-			    buffer->dma_addr);
-	buffer->addr = NULL;
-	buffer->entries = 0;
-}
-
-/**************************************************************************
- *
- * Falcon generic buffer handling
- * These buffers are used for interrupt status and MAC stats
- *
- **************************************************************************/
-
-static int falcon_alloc_buffer(struct efx_nic *efx,
-			       struct efx_buffer *buffer, unsigned int len)
-{
-	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
-					    &buffer->dma_addr);
-	if (!buffer->addr)
-		return -ENOMEM;
-	buffer->len = len;
-	memset(buffer->addr, 0, len);
-	return 0;
-}
-
-static void falcon_free_buffer(struct efx_nic *efx, struct efx_buffer *buffer)
-{
-	if (buffer->addr) {
-		pci_free_consistent(efx->pci_dev, buffer->len,
-				    buffer->addr, buffer->dma_addr);
-		buffer->addr = NULL;
-	}
-}
-
-/**************************************************************************
- *
- * Falcon TX path
- *
- **************************************************************************/
-
-/* Returns a pointer to the specified transmit descriptor in the TX
- * descriptor queue belonging to the specified channel.
- */
-static inline efx_qword_t *falcon_tx_desc(struct efx_tx_queue *tx_queue,
-					       unsigned int index)
-{
-	return (((efx_qword_t *) (tx_queue->txd.addr)) + index);
-}
-
-/* This writes to the TX_DESC_WPTR; write pointer for TX descriptor ring */
-static inline void falcon_notify_tx_desc(struct efx_tx_queue *tx_queue)
-{
-	unsigned write_ptr;
-	efx_dword_t reg;
-
-	write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK;
-	EFX_POPULATE_DWORD_1(reg, TX_DESC_WPTR_DWORD, write_ptr);
-	falcon_writel_page(tx_queue->efx, &reg,
-			   TX_DESC_UPD_REG_KER_DWORD, tx_queue->queue);
-}
-
-
-/* For each entry inserted into the software descriptor ring, create a
- * descriptor in the hardware TX descriptor ring (in host memory), and
- * write a doorbell.
- */
-void falcon_push_buffers(struct efx_tx_queue *tx_queue)
-{
-
-	struct efx_tx_buffer *buffer;
-	efx_qword_t *txd;
-	unsigned write_ptr;
-
-	BUG_ON(tx_queue->write_count == tx_queue->insert_count);
-
-	do {
-		write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK;
-		buffer = &tx_queue->buffer[write_ptr];
-		txd = falcon_tx_desc(tx_queue, write_ptr);
-		++tx_queue->write_count;
-
-		/* Create TX descriptor ring entry */
-		EFX_POPULATE_QWORD_5(*txd,
-				     TX_KER_PORT, 0,
-				     TX_KER_CONT, buffer->continuation,
-				     TX_KER_BYTE_CNT, buffer->len,
-				     TX_KER_BUF_REGION, 0,
-				     TX_KER_BUF_ADR, buffer->dma_addr);
-	} while (tx_queue->write_count != tx_queue->insert_count);
-
-	wmb(); /* Ensure descriptors are written before they are fetched */
-	falcon_notify_tx_desc(tx_queue);
-}
-
-/* Allocate hardware resources for a TX queue */
-int falcon_probe_tx(struct efx_tx_queue *tx_queue)
-{
-	struct efx_nic *efx = tx_queue->efx;
-	return falcon_alloc_special_buffer(efx, &tx_queue->txd,
-					   FALCON_TXD_RING_SIZE *
-					   sizeof(efx_qword_t));
-}
-
-void falcon_init_tx(struct efx_tx_queue *tx_queue)
-{
-	efx_oword_t tx_desc_ptr;
-	struct efx_nic *efx = tx_queue->efx;
-
-	tx_queue->flushed = false;
-
-	/* Pin TX descriptor ring */
-	falcon_init_special_buffer(efx, &tx_queue->txd);
-
-	/* Push TX descriptor ring to card */
-	EFX_POPULATE_OWORD_10(tx_desc_ptr,
-			      TX_DESCQ_EN, 1,
-			      TX_ISCSI_DDIG_EN, 0,
-			      TX_ISCSI_HDIG_EN, 0,
-			      TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index,
-			      TX_DESCQ_EVQ_ID, tx_queue->channel->channel,
-			      TX_DESCQ_OWNER_ID, 0,
-			      TX_DESCQ_LABEL, tx_queue->queue,
-			      TX_DESCQ_SIZE, FALCON_TXD_RING_ORDER,
-			      TX_DESCQ_TYPE, 0,
-			      TX_NON_IP_DROP_DIS_B0, 1);
-
-	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		int csum = tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM;
-		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, !csum);
-		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, !csum);
-	}
-
-	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
-			   tx_queue->queue);
-
-	if (falcon_rev(efx) < FALCON_REV_B0) {
-		efx_oword_t reg;
-
-		/* Only 128 bits in this register */
-		BUILD_BUG_ON(EFX_TX_QUEUE_COUNT >= 128);
-
-		falcon_read(efx, &reg, TX_CHKSM_CFG_REG_KER_A1);
-		if (tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM)
-			clear_bit_le(tx_queue->queue, (void *)&reg);
-		else
-			set_bit_le(tx_queue->queue, (void *)&reg);
-		falcon_write(efx, &reg, TX_CHKSM_CFG_REG_KER_A1);
-	}
-}
-
-static void falcon_flush_tx_queue(struct efx_tx_queue *tx_queue)
-{
-	struct efx_nic *efx = tx_queue->efx;
-	efx_oword_t tx_flush_descq;
-
-	/* Post a flush command */
-	EFX_POPULATE_OWORD_2(tx_flush_descq,
-			     TX_FLUSH_DESCQ_CMD, 1,
-			     TX_FLUSH_DESCQ, tx_queue->queue);
-	falcon_write(efx, &tx_flush_descq, TX_FLUSH_DESCQ_REG_KER);
-}
-
-void falcon_fini_tx(struct efx_tx_queue *tx_queue)
-{
-	struct efx_nic *efx = tx_queue->efx;
-	efx_oword_t tx_desc_ptr;
-
-	/* The queue should have been flushed */
-	WARN_ON(!tx_queue->flushed);
-
-	/* Remove TX descriptor ring from card */
-	EFX_ZERO_OWORD(tx_desc_ptr);
-	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
-			   tx_queue->queue);
-
-	/* Unpin TX descriptor ring */
-	falcon_fini_special_buffer(efx, &tx_queue->txd);
-}
-
-/* Free buffers backing TX queue */
-void falcon_remove_tx(struct efx_tx_queue *tx_queue)
-{
-	falcon_free_special_buffer(tx_queue->efx, &tx_queue->txd);
-}
-
-/**************************************************************************
- *
- * Falcon RX path
- *
- **************************************************************************/
-
-/* Returns a pointer to the specified descriptor in the RX descriptor queue */
-static inline efx_qword_t *falcon_rx_desc(struct efx_rx_queue *rx_queue,
-					       unsigned int index)
-{
-	return (((efx_qword_t *) (rx_queue->rxd.addr)) + index);
-}
-
-/* This creates an entry in the RX descriptor queue */
-static inline void falcon_build_rx_desc(struct efx_rx_queue *rx_queue,
-					unsigned index)
-{
-	struct efx_rx_buffer *rx_buf;
-	efx_qword_t *rxd;
-
-	rxd = falcon_rx_desc(rx_queue, index);
-	rx_buf = efx_rx_buffer(rx_queue, index);
-	EFX_POPULATE_QWORD_3(*rxd,
-			     RX_KER_BUF_SIZE,
-			     rx_buf->len -
-			     rx_queue->efx->type->rx_buffer_padding,
-			     RX_KER_BUF_REGION, 0,
-			     RX_KER_BUF_ADR, rx_buf->dma_addr);
-}
-
-/* This writes to the RX_DESC_WPTR register for the specified receive
- * descriptor ring.
- */
-void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue)
-{
-	efx_dword_t reg;
-	unsigned write_ptr;
-
-	while (rx_queue->notified_count != rx_queue->added_count) {
-		falcon_build_rx_desc(rx_queue,
-				     rx_queue->notified_count &
-				     FALCON_RXD_RING_MASK);
-		++rx_queue->notified_count;
-	}
-
-	wmb();
-	write_ptr = rx_queue->added_count & FALCON_RXD_RING_MASK;
-	EFX_POPULATE_DWORD_1(reg, RX_DESC_WPTR_DWORD, write_ptr);
-	falcon_writel_page(rx_queue->efx, &reg,
-			   RX_DESC_UPD_REG_KER_DWORD, rx_queue->queue);
-}
-
-int falcon_probe_rx(struct efx_rx_queue *rx_queue)
-{
-	struct efx_nic *efx = rx_queue->efx;
-	return falcon_alloc_special_buffer(efx, &rx_queue->rxd,
-					   FALCON_RXD_RING_SIZE *
-					   sizeof(efx_qword_t));
-}
-
-void falcon_init_rx(struct efx_rx_queue *rx_queue)
-{
-	efx_oword_t rx_desc_ptr;
-	struct efx_nic *efx = rx_queue->efx;
-	bool is_b0 = falcon_rev(efx) >= FALCON_REV_B0;
-	bool iscsi_digest_en = is_b0;
-
-	EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
-		rx_queue->queue, rx_queue->rxd.index,
-		rx_queue->rxd.index + rx_queue->rxd.entries - 1);
-
-	rx_queue->flushed = false;
-
-	/* Pin RX descriptor ring */
-	falcon_init_special_buffer(efx, &rx_queue->rxd);
-
-	/* Push RX descriptor ring to card */
-	EFX_POPULATE_OWORD_10(rx_desc_ptr,
-			      RX_ISCSI_DDIG_EN, iscsi_digest_en,
-			      RX_ISCSI_HDIG_EN, iscsi_digest_en,
-			      RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index,
-			      RX_DESCQ_EVQ_ID, rx_queue->channel->channel,
-			      RX_DESCQ_OWNER_ID, 0,
-			      RX_DESCQ_LABEL, rx_queue->queue,
-			      RX_DESCQ_SIZE, FALCON_RXD_RING_ORDER,
-			      RX_DESCQ_TYPE, 0 /* kernel queue */ ,
-			      /* For >=B0 this is scatter so disable */
-			      RX_DESCQ_JUMBO, !is_b0,
-			      RX_DESCQ_EN, 1);
-	falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
-			   rx_queue->queue);
-}
-
-static void falcon_flush_rx_queue(struct efx_rx_queue *rx_queue)
-{
-	struct efx_nic *efx = rx_queue->efx;
-	efx_oword_t rx_flush_descq;
-
-	/* Post a flush command */
-	EFX_POPULATE_OWORD_2(rx_flush_descq,
-			     RX_FLUSH_DESCQ_CMD, 1,
-			     RX_FLUSH_DESCQ, rx_queue->queue);
-	falcon_write(efx, &rx_flush_descq, RX_FLUSH_DESCQ_REG_KER);
-}
-
-void falcon_fini_rx(struct efx_rx_queue *rx_queue)
-{
-	efx_oword_t rx_desc_ptr;
-	struct efx_nic *efx = rx_queue->efx;
-
-	/* The queue should already have been flushed */
-	WARN_ON(!rx_queue->flushed);
-
-	/* Remove RX descriptor ring from card */
-	EFX_ZERO_OWORD(rx_desc_ptr);
-	falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
-			   rx_queue->queue);
-
-	/* Unpin RX descriptor ring */
-	falcon_fini_special_buffer(efx, &rx_queue->rxd);
-}
-
-/* Free buffers backing RX queue */
-void falcon_remove_rx(struct efx_rx_queue *rx_queue)
-{
-	falcon_free_special_buffer(rx_queue->efx, &rx_queue->rxd);
-}
-
-/**************************************************************************
- *
- * Falcon event queue processing
- * Event queues are processed by per-channel tasklets.
- *
- **************************************************************************/
-
-/* Update a channel's event queue's read pointer (RPTR) register
- *
- * This writes the EVQ_RPTR_REG register for the specified channel's
- * event queue.
- *
- * Note that EVQ_RPTR_REG contains the index of the "last read" event,
- * whereas channel->eventq_read_ptr contains the index of the "next to
- * read" event.
- */
-void falcon_eventq_read_ack(struct efx_channel *channel)
-{
-	efx_dword_t reg;
-	struct efx_nic *efx = channel->efx;
-
-	EFX_POPULATE_DWORD_1(reg, EVQ_RPTR_DWORD, channel->eventq_read_ptr);
-	falcon_writel_table(efx, &reg, efx->type->evq_rptr_tbl_base,
-			    channel->channel);
-}
-
-/* Use HW to insert a SW defined event */
-void falcon_generate_event(struct efx_channel *channel, efx_qword_t *event)
-{
-	efx_oword_t drv_ev_reg;
-
-	EFX_POPULATE_OWORD_2(drv_ev_reg,
-			     DRV_EV_QID, channel->channel,
-			     DRV_EV_DATA,
-			     EFX_QWORD_FIELD64(*event, WHOLE_EVENT));
-	falcon_write(channel->efx, &drv_ev_reg, DRV_EV_REG_KER);
-}
-
-/* Handle a transmit completion event
- *
- * Falcon batches TX completion events; the message we receive is of
- * the form "complete all TX events up to this index".
- */
-static void falcon_handle_tx_event(struct efx_channel *channel,
-				   efx_qword_t *event)
-{
-	unsigned int tx_ev_desc_ptr;
-	unsigned int tx_ev_q_label;
-	struct efx_tx_queue *tx_queue;
-	struct efx_nic *efx = channel->efx;
-
-	if (likely(EFX_QWORD_FIELD(*event, TX_EV_COMP))) {
-		/* Transmit completion */
-		tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, TX_EV_DESC_PTR);
-		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
-		tx_queue = &efx->tx_queue[tx_ev_q_label];
-		channel->irq_mod_score +=
-			(tx_ev_desc_ptr - tx_queue->read_count) &
-			efx->type->txd_ring_mask;
-		efx_xmit_done(tx_queue, tx_ev_desc_ptr);
-	} else if (EFX_QWORD_FIELD(*event, TX_EV_WQ_FF_FULL)) {
-		/* Rewrite the FIFO write pointer */
-		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
-		tx_queue = &efx->tx_queue[tx_ev_q_label];
-
-		if (efx_dev_registered(efx))
-			netif_tx_lock(efx->net_dev);
-		falcon_notify_tx_desc(tx_queue);
-		if (efx_dev_registered(efx))
-			netif_tx_unlock(efx->net_dev);
-	} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
-		   EFX_WORKAROUND_10727(efx)) {
-		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
-	} else {
-		EFX_ERR(efx, "channel %d unexpected TX event "
-			EFX_QWORD_FMT"\n", channel->channel,
-			EFX_QWORD_VAL(*event));
-	}
-}
-
-/* Detect errors included in the rx_evt_pkt_ok bit. */
-static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue,
-				    const efx_qword_t *event,
-				    bool *rx_ev_pkt_ok,
-				    bool *discard)
-{
-	struct efx_nic *efx = rx_queue->efx;
-	bool rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err;
-	bool rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err;
-	bool rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc;
-	bool rx_ev_other_err, rx_ev_pause_frm;
-	bool rx_ev_ip_frag_err, rx_ev_hdr_type, rx_ev_mcast_pkt;
-	unsigned rx_ev_pkt_type;
-
-	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE);
-	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT);
-	rx_ev_tobe_disc = EFX_QWORD_FIELD(*event, RX_EV_TOBE_DISC);
-	rx_ev_pkt_type = EFX_QWORD_FIELD(*event, RX_EV_PKT_TYPE);
-	rx_ev_buf_owner_id_err = EFX_QWORD_FIELD(*event,
-						 RX_EV_BUF_OWNER_ID_ERR);
-	rx_ev_ip_frag_err = EFX_QWORD_FIELD(*event, RX_EV_IF_FRAG_ERR);
-	rx_ev_ip_hdr_chksum_err = EFX_QWORD_FIELD(*event,
-						  RX_EV_IP_HDR_CHKSUM_ERR);
-	rx_ev_tcp_udp_chksum_err = EFX_QWORD_FIELD(*event,
-						   RX_EV_TCP_UDP_CHKSUM_ERR);
-	rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
-	rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
-	rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ?
-			  0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
-	rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
-
-	/* Every error apart from tobe_disc and pause_frm */
-	rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err |
-			   rx_ev_buf_owner_id_err | rx_ev_eth_crc_err |
-			   rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err);
-
-	/* Count errors that are not in MAC stats.  Ignore expected
-	 * checksum errors during self-test. */
-	if (rx_ev_frm_trunc)
-		++rx_queue->channel->n_rx_frm_trunc;
-	else if (rx_ev_tobe_disc)
-		++rx_queue->channel->n_rx_tobe_disc;
-	else if (!efx->loopback_selftest) {
-		if (rx_ev_ip_hdr_chksum_err)
-			++rx_queue->channel->n_rx_ip_hdr_chksum_err;
-		else if (rx_ev_tcp_udp_chksum_err)
-			++rx_queue->channel->n_rx_tcp_udp_chksum_err;
-	}
-	if (rx_ev_ip_frag_err)
-		++rx_queue->channel->n_rx_ip_frag_err;
-
-	/* The frame must be discarded if any of these are true. */
-	*discard = (rx_ev_eth_crc_err | rx_ev_frm_trunc | rx_ev_drib_nib |
-		    rx_ev_tobe_disc | rx_ev_pause_frm);
-
-	/* TOBE_DISC is expected on unicast mismatches; don't print out an
-	 * error message.  FRM_TRUNC indicates RXDP dropped the packet due
-	 * to a FIFO overflow.
-	 */
-#ifdef EFX_ENABLE_DEBUG
-	if (rx_ev_other_err) {
-		EFX_INFO_RL(efx, " RX queue %d unexpected RX event "
-			    EFX_QWORD_FMT "%s%s%s%s%s%s%s%s\n",
-			    rx_queue->queue, EFX_QWORD_VAL(*event),
-			    rx_ev_buf_owner_id_err ? " [OWNER_ID_ERR]" : "",
-			    rx_ev_ip_hdr_chksum_err ?
-			    " [IP_HDR_CHKSUM_ERR]" : "",
-			    rx_ev_tcp_udp_chksum_err ?
-			    " [TCP_UDP_CHKSUM_ERR]" : "",
-			    rx_ev_eth_crc_err ? " [ETH_CRC_ERR]" : "",
-			    rx_ev_frm_trunc ? " [FRM_TRUNC]" : "",
-			    rx_ev_drib_nib ? " [DRIB_NIB]" : "",
-			    rx_ev_tobe_disc ? " [TOBE_DISC]" : "",
-			    rx_ev_pause_frm ? " [PAUSE]" : "");
-	}
-#endif
-}
-
-/* Handle receive events that are not in-order. */
-static void falcon_handle_rx_bad_index(struct efx_rx_queue *rx_queue,
-				       unsigned index)
-{
-	struct efx_nic *efx = rx_queue->efx;
-	unsigned expected, dropped;
-
-	expected = rx_queue->removed_count & FALCON_RXD_RING_MASK;
-	dropped = ((index + FALCON_RXD_RING_SIZE - expected) &
-		   FALCON_RXD_RING_MASK);
-	EFX_INFO(efx, "dropped %d events (index=%d expected=%d)\n",
-		dropped, index, expected);
-
-	efx_schedule_reset(efx, EFX_WORKAROUND_5676(efx) ?
-			   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
-}
-
-/* Handle a packet received event
- *
- * Falcon silicon gives a "discard" flag if it's a unicast packet with the
- * wrong destination address
- * Also "is multicast" and "matches multicast filter" flags can be used to
- * discard non-matching multicast packets.
- */
-static void falcon_handle_rx_event(struct efx_channel *channel,
-				   const efx_qword_t *event)
-{
-	unsigned int rx_ev_desc_ptr, rx_ev_byte_cnt;
-	unsigned int rx_ev_hdr_type, rx_ev_mcast_pkt;
-	unsigned expected_ptr;
-	bool rx_ev_pkt_ok, discard = false, checksummed;
-	struct efx_rx_queue *rx_queue;
-	struct efx_nic *efx = channel->efx;
-
-	/* Basic packet information */
-	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, RX_EV_BYTE_CNT);
-	rx_ev_pkt_ok = EFX_QWORD_FIELD(*event, RX_EV_PKT_OK);
-	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE);
-	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_JUMBO_CONT));
-	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_SOP) != 1);
-	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_Q_LABEL) != channel->channel);
-
-	rx_queue = &efx->rx_queue[channel->channel];
-
-	rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR);
-	expected_ptr = rx_queue->removed_count & FALCON_RXD_RING_MASK;
-	if (unlikely(rx_ev_desc_ptr != expected_ptr))
-		falcon_handle_rx_bad_index(rx_queue, rx_ev_desc_ptr);
-
-	if (likely(rx_ev_pkt_ok)) {
-		/* If packet is marked as OK and packet type is TCP/IPv4 or
-		 * UDP/IPv4, then we can rely on the hardware checksum.
-		 */
-		checksummed = RX_EV_HDR_TYPE_HAS_CHECKSUMS(rx_ev_hdr_type);
-	} else {
-		falcon_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok,
-					&discard);
-		checksummed = false;
-	}
-
-	/* Detect multicast packets that didn't match the filter */
-	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT);
-	if (rx_ev_mcast_pkt) {
-		unsigned int rx_ev_mcast_hash_match =
-			EFX_QWORD_FIELD(*event, RX_EV_MCAST_HASH_MATCH);
-
-		if (unlikely(!rx_ev_mcast_hash_match))
-			discard = true;
-	}
-
-	channel->irq_mod_score += 2;
-
-	/* Handle received packet */
-	efx_rx_packet(rx_queue, rx_ev_desc_ptr, rx_ev_byte_cnt,
-		      checksummed, discard);
-}
-
-/* Global events are basically PHY events */
-static void falcon_handle_global_event(struct efx_channel *channel,
-				       efx_qword_t *event)
-{
-	struct efx_nic *efx = channel->efx;
-	bool handled = false;
-
-	if (EFX_QWORD_FIELD(*event, G_PHY0_INTR) ||
-	    EFX_QWORD_FIELD(*event, G_PHY1_INTR) ||
-	    EFX_QWORD_FIELD(*event, XG_PHY_INTR) ||
-	    EFX_QWORD_FIELD(*event, XFP_PHY_INTR)) {
-		efx->phy_op->clear_interrupt(efx);
-		queue_work(efx->workqueue, &efx->phy_work);
-		handled = true;
-	}
-
-	if ((falcon_rev(efx) >= FALCON_REV_B0) &&
-	    EFX_QWORD_FIELD(*event, XG_MNT_INTR_B0)) {
-		queue_work(efx->workqueue, &efx->mac_work);
-		handled = true;
-	}
-
-	if (EFX_QWORD_FIELD_VER(efx, *event, RX_RECOVERY)) {
-		EFX_ERR(efx, "channel %d seen global RX_RESET "
-			"event. Resetting.\n", channel->channel);
-
-		atomic_inc(&efx->rx_reset);
-		efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ?
-				   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
-		handled = true;
-	}
-
-	if (!handled)
-		EFX_ERR(efx, "channel %d unknown global event "
-			EFX_QWORD_FMT "\n", channel->channel,
-			EFX_QWORD_VAL(*event));
-}
-
-static void falcon_handle_driver_event(struct efx_channel *channel,
-				       efx_qword_t *event)
-{
-	struct efx_nic *efx = channel->efx;
-	unsigned int ev_sub_code;
-	unsigned int ev_sub_data;
-
-	ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
-	ev_sub_data = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_DATA);
-
-	switch (ev_sub_code) {
-	case TX_DESCQ_FLS_DONE_EV_DECODE:
-		EFX_TRACE(efx, "channel %d TXQ %d flushed\n",
-			  channel->channel, ev_sub_data);
-		break;
-	case RX_DESCQ_FLS_DONE_EV_DECODE:
-		EFX_TRACE(efx, "channel %d RXQ %d flushed\n",
-			  channel->channel, ev_sub_data);
-		break;
-	case EVQ_INIT_DONE_EV_DECODE:
-		EFX_LOG(efx, "channel %d EVQ %d initialised\n",
-			channel->channel, ev_sub_data);
-		break;
-	case SRM_UPD_DONE_EV_DECODE:
-		EFX_TRACE(efx, "channel %d SRAM update done\n",
-			  channel->channel);
-		break;
-	case WAKE_UP_EV_DECODE:
-		EFX_TRACE(efx, "channel %d RXQ %d wakeup event\n",
-			  channel->channel, ev_sub_data);
-		break;
-	case TIMER_EV_DECODE:
-		EFX_TRACE(efx, "channel %d RX queue %d timer expired\n",
-			  channel->channel, ev_sub_data);
-		break;
-	case RX_RECOVERY_EV_DECODE:
-		EFX_ERR(efx, "channel %d seen DRIVER RX_RESET event. "
-			"Resetting.\n", channel->channel);
-		atomic_inc(&efx->rx_reset);
-		efx_schedule_reset(efx,
-				   EFX_WORKAROUND_6555(efx) ?
-				   RESET_TYPE_RX_RECOVERY :
-				   RESET_TYPE_DISABLE);
-		break;
-	case RX_DSC_ERROR_EV_DECODE:
-		EFX_ERR(efx, "RX DMA Q %d reports descriptor fetch error."
-			" RX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
-		efx_schedule_reset(efx, RESET_TYPE_RX_DESC_FETCH);
-		break;
-	case TX_DSC_ERROR_EV_DECODE:
-		EFX_ERR(efx, "TX DMA Q %d reports descriptor fetch error."
-			" TX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
-		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
-		break;
-	default:
-		EFX_TRACE(efx, "channel %d unknown driver event code %d "
-			  "data %04x\n", channel->channel, ev_sub_code,
-			  ev_sub_data);
-		break;
-	}
-}
-
-int falcon_process_eventq(struct efx_channel *channel, int rx_quota)
-{
-	unsigned int read_ptr;
-	efx_qword_t event, *p_event;
-	int ev_code;
-	int rx_packets = 0;
-
-	read_ptr = channel->eventq_read_ptr;
-
-	do {
-		p_event = falcon_event(channel, read_ptr);
-		event = *p_event;
-
-		if (!falcon_event_present(&event))
-			/* End of events */
-			break;
-
-		EFX_TRACE(channel->efx, "channel %d event is "EFX_QWORD_FMT"\n",
-			  channel->channel, EFX_QWORD_VAL(event));
-
-		/* Clear this event by marking it all ones */
-		EFX_SET_QWORD(*p_event);
-
-		ev_code = EFX_QWORD_FIELD(event, EV_CODE);
-
-		switch (ev_code) {
-		case RX_IP_EV_DECODE:
-			falcon_handle_rx_event(channel, &event);
-			++rx_packets;
-			break;
-		case TX_IP_EV_DECODE:
-			falcon_handle_tx_event(channel, &event);
-			break;
-		case DRV_GEN_EV_DECODE:
-			channel->eventq_magic
-				= EFX_QWORD_FIELD(event, EVQ_MAGIC);
-			EFX_LOG(channel->efx, "channel %d received generated "
-				"event "EFX_QWORD_FMT"\n", channel->channel,
-				EFX_QWORD_VAL(event));
-			break;
-		case GLOBAL_EV_DECODE:
-			falcon_handle_global_event(channel, &event);
-			break;
-		case DRIVER_EV_DECODE:
-			falcon_handle_driver_event(channel, &event);
-			break;
-		default:
-			EFX_ERR(channel->efx, "channel %d unknown event type %d"
-				" (data " EFX_QWORD_FMT ")\n", channel->channel,
-				ev_code, EFX_QWORD_VAL(event));
-		}
-
-		/* Increment read pointer */
-		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
-
-	} while (rx_packets < rx_quota);
-
-	channel->eventq_read_ptr = read_ptr;
-	return rx_packets;
-}
-
-void falcon_set_int_moderation(struct efx_channel *channel)
+static void falcon_push_irq_moderation(struct efx_channel *channel)
 {
 	efx_dword_t timer_cmd;
 	struct efx_nic *efx = channel->efx;
 
 	/* Set timer register */
 	if (channel->irq_moderation) {
-		/* Round to resolution supported by hardware.  The value we
-		 * program is based at 0.  So actual interrupt moderation
-		 * achieved is ((x + 1) * res).
-		 */
-		channel->irq_moderation -= (channel->irq_moderation %
-					    FALCON_IRQ_MOD_RESOLUTION);
-		if (channel->irq_moderation < FALCON_IRQ_MOD_RESOLUTION)
-			channel->irq_moderation = FALCON_IRQ_MOD_RESOLUTION;
 		EFX_POPULATE_DWORD_2(timer_cmd,
-				     TIMER_MODE, TIMER_MODE_INT_HLDOFF,
-				     TIMER_VAL,
-				     channel->irq_moderation /
-				     FALCON_IRQ_MOD_RESOLUTION - 1);
+				     FRF_AB_TC_TIMER_MODE,
+				     FFE_BB_TIMER_MODE_INT_HLDOFF,
+				     FRF_AB_TC_TIMER_VAL,
+				     channel->irq_moderation - 1);
 	} else {
 		EFX_POPULATE_DWORD_2(timer_cmd,
-				     TIMER_MODE, TIMER_MODE_DIS,
-				     TIMER_VAL, 0);
+				     FRF_AB_TC_TIMER_MODE,
+				     FFE_BB_TIMER_MODE_DIS,
+				     FRF_AB_TC_TIMER_VAL, 0);
 	}
-	falcon_writel_page_locked(efx, &timer_cmd, TIMER_CMD_REG_KER,
-				  channel->channel);
-
+	BUILD_BUG_ON(FR_AA_TIMER_COMMAND_KER != FR_BZ_TIMER_COMMAND_P0);
+	efx_writed_page_locked(efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0,
+			       channel->channel);
 }
 
-/* Allocate buffer table entries for event queue */
-int falcon_probe_eventq(struct efx_channel *channel)
+static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx);
+
+static void falcon_prepare_flush(struct efx_nic *efx)
 {
-	struct efx_nic *efx = channel->efx;
-	unsigned int evq_size;
+	falcon_deconfigure_mac_wrapper(efx);
 
-	evq_size = FALCON_EVQ_SIZE * sizeof(efx_qword_t);
-	return falcon_alloc_special_buffer(efx, &channel->eventq, evq_size);
-}
-
-void falcon_init_eventq(struct efx_channel *channel)
-{
-	efx_oword_t evq_ptr;
-	struct efx_nic *efx = channel->efx;
-
-	EFX_LOG(efx, "channel %d event queue in special buffers %d-%d\n",
-		channel->channel, channel->eventq.index,
-		channel->eventq.index + channel->eventq.entries - 1);
-
-	/* Pin event queue buffer */
-	falcon_init_special_buffer(efx, &channel->eventq);
-
-	/* Fill event queue with all ones (i.e. empty events) */
-	memset(channel->eventq.addr, 0xff, channel->eventq.len);
-
-	/* Push event queue to card */
-	EFX_POPULATE_OWORD_3(evq_ptr,
-			     EVQ_EN, 1,
-			     EVQ_SIZE, FALCON_EVQ_ORDER,
-			     EVQ_BUF_BASE_ID, channel->eventq.index);
-	falcon_write_table(efx, &evq_ptr, efx->type->evq_ptr_tbl_base,
-			   channel->channel);
-
-	falcon_set_int_moderation(channel);
-}
-
-void falcon_fini_eventq(struct efx_channel *channel)
-{
-	efx_oword_t eventq_ptr;
-	struct efx_nic *efx = channel->efx;
-
-	/* Remove event queue from card */
-	EFX_ZERO_OWORD(eventq_ptr);
-	falcon_write_table(efx, &eventq_ptr, efx->type->evq_ptr_tbl_base,
-			   channel->channel);
-
-	/* Unpin event queue */
-	falcon_fini_special_buffer(efx, &channel->eventq);
-}
-
-/* Free buffers backing event queue */
-void falcon_remove_eventq(struct efx_channel *channel)
-{
-	falcon_free_special_buffer(channel->efx, &channel->eventq);
-}
-
-
-/* Generates a test event on the event queue.  A subsequent call to
- * process_eventq() should pick up the event and place the value of
- * "magic" into channel->eventq_magic;
- */
-void falcon_generate_test_event(struct efx_channel *channel, unsigned int magic)
-{
-	efx_qword_t test_event;
-
-	EFX_POPULATE_QWORD_2(test_event,
-			     EV_CODE, DRV_GEN_EV_DECODE,
-			     EVQ_MAGIC, magic);
-	falcon_generate_event(channel, &test_event);
-}
-
-void falcon_sim_phy_event(struct efx_nic *efx)
-{
-	efx_qword_t phy_event;
-
-	EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE);
-	if (EFX_IS10G(efx))
-		EFX_SET_QWORD_FIELD(phy_event, XG_PHY_INTR, 1);
-	else
-		EFX_SET_QWORD_FIELD(phy_event, G_PHY0_INTR, 1);
-
-	falcon_generate_event(&efx->channel[0], &phy_event);
-}
-
-/**************************************************************************
- *
- * Flush handling
- *
- **************************************************************************/
-
-
-static void falcon_poll_flush_events(struct efx_nic *efx)
-{
-	struct efx_channel *channel = &efx->channel[0];
-	struct efx_tx_queue *tx_queue;
-	struct efx_rx_queue *rx_queue;
-	unsigned int read_ptr = channel->eventq_read_ptr;
-	unsigned int end_ptr = (read_ptr - 1) & FALCON_EVQ_MASK;
-
-	do {
-		efx_qword_t *event = falcon_event(channel, read_ptr);
-		int ev_code, ev_sub_code, ev_queue;
-		bool ev_failed;
-
-		if (!falcon_event_present(event))
-			break;
-
-		ev_code = EFX_QWORD_FIELD(*event, EV_CODE);
-		ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
-		if (ev_code == DRIVER_EV_DECODE &&
-		    ev_sub_code == TX_DESCQ_FLS_DONE_EV_DECODE) {
-			ev_queue = EFX_QWORD_FIELD(*event,
-						   DRIVER_EV_TX_DESCQ_ID);
-			if (ev_queue < EFX_TX_QUEUE_COUNT) {
-				tx_queue = efx->tx_queue + ev_queue;
-				tx_queue->flushed = true;
-			}
-		} else if (ev_code == DRIVER_EV_DECODE &&
-			   ev_sub_code == RX_DESCQ_FLS_DONE_EV_DECODE) {
-			ev_queue = EFX_QWORD_FIELD(*event,
-						   DRIVER_EV_RX_DESCQ_ID);
-			ev_failed = EFX_QWORD_FIELD(*event,
-						    DRIVER_EV_RX_FLUSH_FAIL);
-			if (ev_queue < efx->n_rx_queues) {
-				rx_queue = efx->rx_queue + ev_queue;
-
-				/* retry the rx flush */
-				if (ev_failed)
-					falcon_flush_rx_queue(rx_queue);
-				else
-					rx_queue->flushed = true;
-			}
-		}
-
-		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
-	} while (read_ptr != end_ptr);
-}
-
-/* Handle tx and rx flushes at the same time, since they run in
- * parallel in the hardware and there's no reason for us to
- * serialise them */
-int falcon_flush_queues(struct efx_nic *efx)
-{
-	struct efx_rx_queue *rx_queue;
-	struct efx_tx_queue *tx_queue;
-	int i;
-	bool outstanding;
-
-	/* Issue flush requests */
-	efx_for_each_tx_queue(tx_queue, efx) {
-		tx_queue->flushed = false;
-		falcon_flush_tx_queue(tx_queue);
-	}
-	efx_for_each_rx_queue(rx_queue, efx) {
-		rx_queue->flushed = false;
-		falcon_flush_rx_queue(rx_queue);
-	}
-
-	/* Poll the evq looking for flush completions. Since we're not pushing
-	 * any more rx or tx descriptors at this point, we're in no danger of
-	 * overflowing the evq whilst we wait */
-	for (i = 0; i < FALCON_FLUSH_POLL_COUNT; ++i) {
-		msleep(FALCON_FLUSH_INTERVAL);
-		falcon_poll_flush_events(efx);
-
-		/* Check if every queue has been succesfully flushed */
-		outstanding = false;
-		efx_for_each_tx_queue(tx_queue, efx)
-			outstanding |= !tx_queue->flushed;
-		efx_for_each_rx_queue(rx_queue, efx)
-			outstanding |= !rx_queue->flushed;
-		if (!outstanding)
-			return 0;
-	}
-
-	/* Mark the queues as all flushed. We're going to return failure
-	 * leading to a reset, or fake up success anyway. "flushed" now
-	 * indicates that we tried to flush. */
-	efx_for_each_tx_queue(tx_queue, efx) {
-		if (!tx_queue->flushed)
-			EFX_ERR(efx, "tx queue %d flush command timed out\n",
-				tx_queue->queue);
-		tx_queue->flushed = true;
-	}
-	efx_for_each_rx_queue(rx_queue, efx) {
-		if (!rx_queue->flushed)
-			EFX_ERR(efx, "rx queue %d flush command timed out\n",
-				rx_queue->queue);
-		rx_queue->flushed = true;
-	}
-
-	if (EFX_WORKAROUND_7803(efx))
-		return 0;
-
-	return -ETIMEDOUT;
-}
-
-/**************************************************************************
- *
- * Falcon hardware interrupts
- * The hardware interrupt handler does very little work; all the event
- * queue processing is carried out by per-channel tasklets.
- *
- **************************************************************************/
-
-/* Enable/disable/generate Falcon interrupts */
-static inline void falcon_interrupts(struct efx_nic *efx, int enabled,
-				     int force)
-{
-	efx_oword_t int_en_reg_ker;
-
-	EFX_POPULATE_OWORD_2(int_en_reg_ker,
-			     KER_INT_KER, force,
-			     DRV_INT_EN_KER, enabled);
-	falcon_write(efx, &int_en_reg_ker, INT_EN_REG_KER);
-}
-
-void falcon_enable_interrupts(struct efx_nic *efx)
-{
-	efx_oword_t int_adr_reg_ker;
-	struct efx_channel *channel;
-
-	EFX_ZERO_OWORD(*((efx_oword_t *) efx->irq_status.addr));
-	wmb(); /* Ensure interrupt vector is clear before interrupts enabled */
-
-	/* Program address */
-	EFX_POPULATE_OWORD_2(int_adr_reg_ker,
-			     NORM_INT_VEC_DIS_KER, EFX_INT_MODE_USE_MSI(efx),
-			     INT_ADR_KER, efx->irq_status.dma_addr);
-	falcon_write(efx, &int_adr_reg_ker, INT_ADR_REG_KER);
-
-	/* Enable interrupts */
-	falcon_interrupts(efx, 1, 0);
-
-	/* Force processing of all the channels to get the EVQ RPTRs up to
-	   date */
-	efx_for_each_channel(channel, efx)
-		efx_schedule_channel(channel);
-}
-
-void falcon_disable_interrupts(struct efx_nic *efx)
-{
-	/* Disable interrupts */
-	falcon_interrupts(efx, 0, 0);
-}
-
-/* Generate a Falcon test interrupt
- * Interrupt must already have been enabled, otherwise nasty things
- * may happen.
- */
-void falcon_generate_interrupt(struct efx_nic *efx)
-{
-	falcon_interrupts(efx, 1, 1);
+	/* Wait for the tx and rx fifo's to get to the next packet boundary
+	 * (~1ms without back-pressure), then to drain the remainder of the
+	 * fifo's at data path speeds (negligible), with a healthy margin. */
+	msleep(10);
 }
 
 /* Acknowledge a legacy interrupt from Falcon
@@ -1364,113 +144,17 @@
  *
  * NB most hardware supports MSI interrupts
  */
-static inline void falcon_irq_ack_a1(struct efx_nic *efx)
+inline void falcon_irq_ack_a1(struct efx_nic *efx)
 {
 	efx_dword_t reg;
 
-	EFX_POPULATE_DWORD_1(reg, INT_ACK_DUMMY_DATA, 0xb7eb7e);
-	falcon_writel(efx, &reg, INT_ACK_REG_KER_A1);
-	falcon_readl(efx, &reg, WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1);
-}
-
-/* Process a fatal interrupt
- * Disable bus mastering ASAP and schedule a reset
- */
-static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx)
-{
-	struct falcon_nic_data *nic_data = efx->nic_data;
-	efx_oword_t *int_ker = efx->irq_status.addr;
-	efx_oword_t fatal_intr;
-	int error, mem_perr;
-
-	falcon_read(efx, &fatal_intr, FATAL_INTR_REG_KER);
-	error = EFX_OWORD_FIELD(fatal_intr, INT_KER_ERROR);
-
-	EFX_ERR(efx, "SYSTEM ERROR " EFX_OWORD_FMT " status "
-		EFX_OWORD_FMT ": %s\n", EFX_OWORD_VAL(*int_ker),
-		EFX_OWORD_VAL(fatal_intr),
-		error ? "disabling bus mastering" : "no recognised error");
-	if (error == 0)
-		goto out;
-
-	/* If this is a memory parity error dump which blocks are offending */
-	mem_perr = EFX_OWORD_FIELD(fatal_intr, MEM_PERR_INT_KER);
-	if (mem_perr) {
-		efx_oword_t reg;
-		falcon_read(efx, &reg, MEM_STAT_REG_KER);
-		EFX_ERR(efx, "SYSTEM ERROR: memory parity error "
-			EFX_OWORD_FMT "\n", EFX_OWORD_VAL(reg));
-	}
-
-	/* Disable both devices */
-	pci_clear_master(efx->pci_dev);
-	if (FALCON_IS_DUAL_FUNC(efx))
-		pci_clear_master(nic_data->pci_dev2);
-	falcon_disable_interrupts(efx);
-
-	/* Count errors and reset or disable the NIC accordingly */
-	if (nic_data->int_error_count == 0 ||
-	    time_after(jiffies, nic_data->int_error_expire)) {
-		nic_data->int_error_count = 0;
-		nic_data->int_error_expire =
-			jiffies + FALCON_INT_ERROR_EXPIRE * HZ;
-	}
-	if (++nic_data->int_error_count < FALCON_MAX_INT_ERRORS) {
-		EFX_ERR(efx, "SYSTEM ERROR - reset scheduled\n");
-		efx_schedule_reset(efx, RESET_TYPE_INT_ERROR);
-	} else {
-		EFX_ERR(efx, "SYSTEM ERROR - max number of errors seen."
-			"NIC will be disabled\n");
-		efx_schedule_reset(efx, RESET_TYPE_DISABLE);
-	}
-out:
-	return IRQ_HANDLED;
-}
-
-/* Handle a legacy interrupt from Falcon
- * Acknowledges the interrupt and schedule event queue processing.
- */
-static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id)
-{
-	struct efx_nic *efx = dev_id;
-	efx_oword_t *int_ker = efx->irq_status.addr;
-	irqreturn_t result = IRQ_NONE;
-	struct efx_channel *channel;
-	efx_dword_t reg;
-	u32 queues;
-	int syserr;
-
-	/* Read the ISR which also ACKs the interrupts */
-	falcon_readl(efx, &reg, INT_ISR0_B0);
-	queues = EFX_EXTRACT_DWORD(reg, 0, 31);
-
-	/* Check to see if we have a serious error condition */
-	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
-	if (unlikely(syserr))
-		return falcon_fatal_interrupt(efx);
-
-	/* Schedule processing of any interrupting queues */
-	efx_for_each_channel(channel, efx) {
-		if ((queues & 1) ||
-		    falcon_event_present(
-			    falcon_event(channel, channel->eventq_read_ptr))) {
-			efx_schedule_channel(channel);
-			result = IRQ_HANDLED;
-		}
-		queues >>= 1;
-	}
-
-	if (result == IRQ_HANDLED) {
-		efx->last_irq_cpu = raw_smp_processor_id();
-		EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_DWORD_FMT "\n",
-			  irq, raw_smp_processor_id(), EFX_DWORD_VAL(reg));
-	}
-
-	return result;
+	EFX_POPULATE_DWORD_1(reg, FRF_AA_INT_ACK_KER_FIELD, 0xb7eb7e);
+	efx_writed(efx, &reg, FR_AA_INT_ACK_KER);
+	efx_readd(efx, &reg, FR_AA_WORK_AROUND_BROKEN_PCI_READS);
 }
 
 
-static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
+irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
 {
 	struct efx_nic *efx = dev_id;
 	efx_oword_t *int_ker = efx->irq_status.addr;
@@ -1491,15 +175,15 @@
 		  irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker));
 
 	/* Check to see if we have a serious error condition */
-	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
+	syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT);
 	if (unlikely(syserr))
-		return falcon_fatal_interrupt(efx);
+		return efx_nic_fatal_interrupt(efx);
 
 	/* Determine interrupting queues, clear interrupt status
 	 * register and acknowledge the device interrupt.
 	 */
-	BUILD_BUG_ON(INT_EVQS_WIDTH > EFX_MAX_CHANNELS);
-	queues = EFX_OWORD_FIELD(*int_ker, INT_EVQS);
+	BUILD_BUG_ON(FSF_AZ_NET_IVEC_INT_Q_WIDTH > EFX_MAX_CHANNELS);
+	queues = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_INT_Q);
 	EFX_ZERO_OWORD(*int_ker);
 	wmb(); /* Ensure the vector is cleared before interrupt ack */
 	falcon_irq_ack_a1(efx);
@@ -1515,126 +199,6 @@
 
 	return IRQ_HANDLED;
 }
-
-/* Handle an MSI interrupt from Falcon
- *
- * Handle an MSI hardware interrupt.  This routine schedules event
- * queue processing.  No interrupt acknowledgement cycle is necessary.
- * Also, we never need to check that the interrupt is for us, since
- * MSI interrupts cannot be shared.
- */
-static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id)
-{
-	struct efx_channel *channel = dev_id;
-	struct efx_nic *efx = channel->efx;
-	efx_oword_t *int_ker = efx->irq_status.addr;
-	int syserr;
-
-	efx->last_irq_cpu = raw_smp_processor_id();
-	EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n",
-		  irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker));
-
-	/* Check to see if we have a serious error condition */
-	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
-	if (unlikely(syserr))
-		return falcon_fatal_interrupt(efx);
-
-	/* Schedule processing of the channel */
-	efx_schedule_channel(channel);
-
-	return IRQ_HANDLED;
-}
-
-
-/* Setup RSS indirection table.
- * This maps from the hash value of the packet to RXQ
- */
-static void falcon_setup_rss_indir_table(struct efx_nic *efx)
-{
-	int i = 0;
-	unsigned long offset;
-	efx_dword_t dword;
-
-	if (falcon_rev(efx) < FALCON_REV_B0)
-		return;
-
-	for (offset = RX_RSS_INDIR_TBL_B0;
-	     offset < RX_RSS_INDIR_TBL_B0 + 0x800;
-	     offset += 0x10) {
-		EFX_POPULATE_DWORD_1(dword, RX_RSS_INDIR_ENT_B0,
-				     i % efx->n_rx_queues);
-		falcon_writel(efx, &dword, offset);
-		i++;
-	}
-}
-
-/* Hook interrupt handler(s)
- * Try MSI and then legacy interrupts.
- */
-int falcon_init_interrupt(struct efx_nic *efx)
-{
-	struct efx_channel *channel;
-	int rc;
-
-	if (!EFX_INT_MODE_USE_MSI(efx)) {
-		irq_handler_t handler;
-		if (falcon_rev(efx) >= FALCON_REV_B0)
-			handler = falcon_legacy_interrupt_b0;
-		else
-			handler = falcon_legacy_interrupt_a1;
-
-		rc = request_irq(efx->legacy_irq, handler, IRQF_SHARED,
-				 efx->name, efx);
-		if (rc) {
-			EFX_ERR(efx, "failed to hook legacy IRQ %d\n",
-				efx->pci_dev->irq);
-			goto fail1;
-		}
-		return 0;
-	}
-
-	/* Hook MSI or MSI-X interrupt */
-	efx_for_each_channel(channel, efx) {
-		rc = request_irq(channel->irq, falcon_msi_interrupt,
-				 IRQF_PROBE_SHARED, /* Not shared */
-				 channel->name, channel);
-		if (rc) {
-			EFX_ERR(efx, "failed to hook IRQ %d\n", channel->irq);
-			goto fail2;
-		}
-	}
-
-	return 0;
-
- fail2:
-	efx_for_each_channel(channel, efx)
-		free_irq(channel->irq, channel);
- fail1:
-	return rc;
-}
-
-void falcon_fini_interrupt(struct efx_nic *efx)
-{
-	struct efx_channel *channel;
-	efx_oword_t reg;
-
-	/* Disable MSI/MSI-X interrupts */
-	efx_for_each_channel(channel, efx) {
-		if (channel->irq)
-			free_irq(channel->irq, channel);
-	}
-
-	/* ACK legacy interrupt */
-	if (falcon_rev(efx) >= FALCON_REV_B0)
-		falcon_read(efx, &reg, INT_ISR0_B0);
-	else
-		falcon_irq_ack_a1(efx);
-
-	/* Disable legacy interrupt */
-	if (efx->legacy_irq)
-		free_irq(efx->legacy_irq, efx);
-}
-
 /**************************************************************************
  *
  * EEPROM/flash
@@ -1647,8 +211,8 @@
 static int falcon_spi_poll(struct efx_nic *efx)
 {
 	efx_oword_t reg;
-	falcon_read(efx, &reg, EE_SPI_HCMD_REG_KER);
-	return EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0;
+	efx_reado(efx, &reg, FR_AB_EE_SPI_HCMD);
+	return EFX_OWORD_FIELD(reg, FRF_AB_EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0;
 }
 
 /* Wait for SPI command completion */
@@ -1678,11 +242,10 @@
 	}
 }
 
-int falcon_spi_cmd(const struct efx_spi_device *spi,
+int falcon_spi_cmd(struct efx_nic *efx, const struct efx_spi_device *spi,
 		   unsigned int command, int address,
 		   const void *in, void *out, size_t len)
 {
-	struct efx_nic *efx = spi->efx;
 	bool addressed = (address >= 0);
 	bool reading = (out != NULL);
 	efx_oword_t reg;
@@ -1700,27 +263,27 @@
 
 	/* Program address register, if we have an address */
 	if (addressed) {
-		EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address);
-		falcon_write(efx, &reg, EE_SPI_HADR_REG_KER);
+		EFX_POPULATE_OWORD_1(reg, FRF_AB_EE_SPI_HADR_ADR, address);
+		efx_writeo(efx, &reg, FR_AB_EE_SPI_HADR);
 	}
 
 	/* Program data register, if we have data */
 	if (in != NULL) {
 		memcpy(&reg, in, len);
-		falcon_write(efx, &reg, EE_SPI_HDATA_REG_KER);
+		efx_writeo(efx, &reg, FR_AB_EE_SPI_HDATA);
 	}
 
 	/* Issue read/write command */
 	EFX_POPULATE_OWORD_7(reg,
-			     EE_SPI_HCMD_CMD_EN, 1,
-			     EE_SPI_HCMD_SF_SEL, spi->device_id,
-			     EE_SPI_HCMD_DABCNT, len,
-			     EE_SPI_HCMD_READ, reading,
-			     EE_SPI_HCMD_DUBCNT, 0,
-			     EE_SPI_HCMD_ADBCNT,
+			     FRF_AB_EE_SPI_HCMD_CMD_EN, 1,
+			     FRF_AB_EE_SPI_HCMD_SF_SEL, spi->device_id,
+			     FRF_AB_EE_SPI_HCMD_DABCNT, len,
+			     FRF_AB_EE_SPI_HCMD_READ, reading,
+			     FRF_AB_EE_SPI_HCMD_DUBCNT, 0,
+			     FRF_AB_EE_SPI_HCMD_ADBCNT,
 			     (addressed ? spi->addr_len : 0),
-			     EE_SPI_HCMD_ENC, command);
-	falcon_write(efx, &reg, EE_SPI_HCMD_REG_KER);
+			     FRF_AB_EE_SPI_HCMD_ENC, command);
+	efx_writeo(efx, &reg, FR_AB_EE_SPI_HCMD);
 
 	/* Wait for read/write to complete */
 	rc = falcon_spi_wait(efx);
@@ -1729,7 +292,7 @@
 
 	/* Read data */
 	if (out != NULL) {
-		falcon_read(efx, &reg, EE_SPI_HDATA_REG_KER);
+		efx_reado(efx, &reg, FR_AB_EE_SPI_HDATA);
 		memcpy(out, &reg, len);
 	}
 
@@ -1751,15 +314,15 @@
 }
 
 /* Wait up to 10 ms for buffered write completion */
-int falcon_spi_wait_write(const struct efx_spi_device *spi)
+int
+falcon_spi_wait_write(struct efx_nic *efx, const struct efx_spi_device *spi)
 {
-	struct efx_nic *efx = spi->efx;
 	unsigned long timeout = jiffies + 1 + DIV_ROUND_UP(HZ, 100);
 	u8 status;
 	int rc;
 
 	for (;;) {
-		rc = falcon_spi_cmd(spi, SPI_RDSR, -1, NULL,
+		rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL,
 				    &status, sizeof(status));
 		if (rc)
 			return rc;
@@ -1775,8 +338,8 @@
 	}
 }
 
-int falcon_spi_read(const struct efx_spi_device *spi, loff_t start,
-		    size_t len, size_t *retlen, u8 *buffer)
+int falcon_spi_read(struct efx_nic *efx, const struct efx_spi_device *spi,
+		    loff_t start, size_t len, size_t *retlen, u8 *buffer)
 {
 	size_t block_len, pos = 0;
 	unsigned int command;
@@ -1786,7 +349,7 @@
 		block_len = min(len - pos, FALCON_SPI_MAX_LEN);
 
 		command = efx_spi_munge_command(spi, SPI_READ, start + pos);
-		rc = falcon_spi_cmd(spi, command, start + pos, NULL,
+		rc = falcon_spi_cmd(efx, spi, command, start + pos, NULL,
 				    buffer + pos, block_len);
 		if (rc)
 			break;
@@ -1805,8 +368,9 @@
 	return rc;
 }
 
-int falcon_spi_write(const struct efx_spi_device *spi, loff_t start,
-		     size_t len, size_t *retlen, const u8 *buffer)
+int
+falcon_spi_write(struct efx_nic *efx, const struct efx_spi_device *spi,
+		 loff_t start, size_t len, size_t *retlen, const u8 *buffer)
 {
 	u8 verify_buffer[FALCON_SPI_MAX_LEN];
 	size_t block_len, pos = 0;
@@ -1814,24 +378,24 @@
 	int rc = 0;
 
 	while (pos < len) {
-		rc = falcon_spi_cmd(spi, SPI_WREN, -1, NULL, NULL, 0);
+		rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0);
 		if (rc)
 			break;
 
 		block_len = min(len - pos,
 				falcon_spi_write_limit(spi, start + pos));
 		command = efx_spi_munge_command(spi, SPI_WRITE, start + pos);
-		rc = falcon_spi_cmd(spi, command, start + pos,
+		rc = falcon_spi_cmd(efx, spi, command, start + pos,
 				    buffer + pos, NULL, block_len);
 		if (rc)
 			break;
 
-		rc = falcon_spi_wait_write(spi);
+		rc = falcon_spi_wait_write(efx, spi);
 		if (rc)
 			break;
 
 		command = efx_spi_munge_command(spi, SPI_READ, start + pos);
-		rc = falcon_spi_cmd(spi, command, start + pos,
+		rc = falcon_spi_cmd(efx, spi, command, start + pos,
 				    NULL, verify_buffer, block_len);
 		if (memcmp(verify_buffer, buffer + pos, block_len)) {
 			rc = -EIO;
@@ -1860,60 +424,70 @@
  **************************************************************************
  */
 
-static int falcon_reset_macs(struct efx_nic *efx)
+static void falcon_push_multicast_hash(struct efx_nic *efx)
 {
-	efx_oword_t reg;
+	union efx_multicast_hash *mc_hash = &efx->multicast_hash;
+
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+	efx_writeo(efx, &mc_hash->oword[0], FR_AB_MAC_MC_HASH_REG0);
+	efx_writeo(efx, &mc_hash->oword[1], FR_AB_MAC_MC_HASH_REG1);
+}
+
+static void falcon_reset_macs(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	efx_oword_t reg, mac_ctrl;
 	int count;
 
-	if (falcon_rev(efx) < FALCON_REV_B0) {
+	if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) {
 		/* It's not safe to use GLB_CTL_REG to reset the
 		 * macs, so instead use the internal MAC resets
 		 */
 		if (!EFX_IS10G(efx)) {
-			EFX_POPULATE_OWORD_1(reg, GM_SW_RST, 1);
-			falcon_write(efx, &reg, GM_CFG1_REG);
+			EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 1);
+			efx_writeo(efx, &reg, FR_AB_GM_CFG1);
 			udelay(1000);
 
-			EFX_POPULATE_OWORD_1(reg, GM_SW_RST, 0);
-			falcon_write(efx, &reg, GM_CFG1_REG);
+			EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 0);
+			efx_writeo(efx, &reg, FR_AB_GM_CFG1);
 			udelay(1000);
-			return 0;
+			return;
 		} else {
-			EFX_POPULATE_OWORD_1(reg, XM_CORE_RST, 1);
-			falcon_write(efx, &reg, XM_GLB_CFG_REG);
+			EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_CORE_RST, 1);
+			efx_writeo(efx, &reg, FR_AB_XM_GLB_CFG);
 
 			for (count = 0; count < 10000; count++) {
-				falcon_read(efx, &reg, XM_GLB_CFG_REG);
-				if (EFX_OWORD_FIELD(reg, XM_CORE_RST) == 0)
-					return 0;
+				efx_reado(efx, &reg, FR_AB_XM_GLB_CFG);
+				if (EFX_OWORD_FIELD(reg, FRF_AB_XM_CORE_RST) ==
+				    0)
+					return;
 				udelay(10);
 			}
 
 			EFX_ERR(efx, "timed out waiting for XMAC core reset\n");
-			return -ETIMEDOUT;
 		}
 	}
 
-	/* MAC stats will fail whilst the TX fifo is draining. Serialise
-	 * the drain sequence with the statistics fetch */
-	efx_stats_disable(efx);
+	/* Mac stats will fail whist the TX fifo is draining */
+	WARN_ON(nic_data->stats_disable_count == 0);
 
-	falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1);
-	falcon_write(efx, &reg, MAC0_CTRL_REG_KER);
+	efx_reado(efx, &mac_ctrl, FR_AB_MAC_CTRL);
+	EFX_SET_OWORD_FIELD(mac_ctrl, FRF_BB_TXFIFO_DRAIN_EN, 1);
+	efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL);
 
-	falcon_read(efx, &reg, GLB_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, RST_XGTX, 1);
-	EFX_SET_OWORD_FIELD(reg, RST_XGRX, 1);
-	EFX_SET_OWORD_FIELD(reg, RST_EM, 1);
-	falcon_write(efx, &reg, GLB_CTL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_GLB_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGTX, 1);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGRX, 1);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_EM, 1);
+	efx_writeo(efx, &reg, FR_AB_GLB_CTL);
 
 	count = 0;
 	while (1) {
-		falcon_read(efx, &reg, GLB_CTL_REG_KER);
-		if (!EFX_OWORD_FIELD(reg, RST_XGTX) &&
-		    !EFX_OWORD_FIELD(reg, RST_XGRX) &&
-		    !EFX_OWORD_FIELD(reg, RST_EM)) {
+		efx_reado(efx, &reg, FR_AB_GLB_CTL);
+		if (!EFX_OWORD_FIELD(reg, FRF_AB_RST_XGTX) &&
+		    !EFX_OWORD_FIELD(reg, FRF_AB_RST_XGRX) &&
+		    !EFX_OWORD_FIELD(reg, FRF_AB_RST_EM)) {
 			EFX_LOG(efx, "Completed MAC reset after %d loops\n",
 				count);
 			break;
@@ -1926,55 +500,50 @@
 		udelay(10);
 	}
 
-	efx_stats_enable(efx);
-
-	/* If we've reset the EM block and the link is up, then
-	 * we'll have to kick the XAUI link so the PHY can recover */
-	if (efx->link_up && EFX_IS10G(efx) && EFX_WORKAROUND_5147(efx))
-		falcon_reset_xaui(efx);
-
-	return 0;
+	/* Ensure the correct MAC is selected before statistics
+	 * are re-enabled by the caller */
+	efx_writeo(efx, &mac_ctrl, FR_AB_MAC_CTRL);
 }
 
 void falcon_drain_tx_fifo(struct efx_nic *efx)
 {
 	efx_oword_t reg;
 
-	if ((falcon_rev(efx) < FALCON_REV_B0) ||
+	if ((efx_nic_rev(efx) < EFX_REV_FALCON_B0) ||
 	    (efx->loopback_mode != LOOPBACK_NONE))
 		return;
 
-	falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_MAC_CTRL);
 	/* There is no point in draining more than once */
-	if (EFX_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0))
+	if (EFX_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN))
 		return;
 
 	falcon_reset_macs(efx);
 }
 
-void falcon_deconfigure_mac_wrapper(struct efx_nic *efx)
+static void falcon_deconfigure_mac_wrapper(struct efx_nic *efx)
 {
 	efx_oword_t reg;
 
-	if (falcon_rev(efx) < FALCON_REV_B0)
+	if (efx_nic_rev(efx) < EFX_REV_FALCON_B0)
 		return;
 
 	/* Isolate the MAC -> RX */
-	falcon_read(efx, &reg, RX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 0);
-	falcon_write(efx, &reg, RX_CFG_REG_KER);
+	efx_reado(efx, &reg, FR_AZ_RX_CFG);
+	EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 0);
+	efx_writeo(efx, &reg, FR_AZ_RX_CFG);
 
-	if (!efx->link_up)
-		falcon_drain_tx_fifo(efx);
+	/* Isolate TX -> MAC */
+	falcon_drain_tx_fifo(efx);
 }
 
 void falcon_reconfigure_mac_wrapper(struct efx_nic *efx)
 {
+	struct efx_link_state *link_state = &efx->link_state;
 	efx_oword_t reg;
 	int link_speed;
-	bool tx_fc;
 
-	switch (efx->link_speed) {
+	switch (link_state->speed) {
 	case 10000: link_speed = 3; break;
 	case 1000:  link_speed = 2; break;
 	case 100:   link_speed = 1; break;
@@ -1985,75 +554,139 @@
 	 * indefinitely held and TX queue can be flushed at any point
 	 * while the link is down. */
 	EFX_POPULATE_OWORD_5(reg,
-			     MAC_XOFF_VAL, 0xffff /* max pause time */,
-			     MAC_BCAD_ACPT, 1,
-			     MAC_UC_PROM, efx->promiscuous,
-			     MAC_LINK_STATUS, 1, /* always set */
-			     MAC_SPEED, link_speed);
+			     FRF_AB_MAC_XOFF_VAL, 0xffff /* max pause time */,
+			     FRF_AB_MAC_BCAD_ACPT, 1,
+			     FRF_AB_MAC_UC_PROM, efx->promiscuous,
+			     FRF_AB_MAC_LINK_STATUS, 1, /* always set */
+			     FRF_AB_MAC_SPEED, link_speed);
 	/* On B0, MAC backpressure can be disabled and packets get
 	 * discarded. */
-	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
-				    !efx->link_up);
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) {
+		EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN,
+				    !link_state->up);
 	}
 
-	falcon_write(efx, &reg, MAC0_CTRL_REG_KER);
+	efx_writeo(efx, &reg, FR_AB_MAC_CTRL);
 
 	/* Restore the multicast hash registers. */
-	falcon_set_multicast_hash(efx);
+	falcon_push_multicast_hash(efx);
 
-	/* Transmission of pause frames when RX crosses the threshold is
-	 * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL.
-	 * Action on receipt of pause frames is controller by XM_DIS_FCNTL */
-	tx_fc = !!(efx->link_fc & EFX_FC_TX);
-	falcon_read(efx, &reg, RX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
-
+	efx_reado(efx, &reg, FR_AZ_RX_CFG);
+	/* Enable XOFF signal from RX FIFO (we enabled it during NIC
+	 * initialisation but it may read back as 0) */
+	EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1);
 	/* Unisolate the MAC -> RX */
-	if (falcon_rev(efx) >= FALCON_REV_B0)
-		EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
-	falcon_write(efx, &reg, RX_CFG_REG_KER);
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1);
+	efx_writeo(efx, &reg, FR_AZ_RX_CFG);
 }
 
-int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset)
+static void falcon_stats_request(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t reg;
-	u32 *dma_done;
-	int i;
 
-	if (disable_dma_stats)
-		return 0;
+	WARN_ON(nic_data->stats_pending);
+	WARN_ON(nic_data->stats_disable_count);
 
-	/* Statistics fetch will fail if the MAC is in TX drain */
-	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		efx_oword_t temp;
-		falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
-		if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
-			return 0;
-	}
+	if (nic_data->stats_dma_done == NULL)
+		return;	/* no mac selected */
 
-	dma_done = (efx->stats_buffer.addr + done_offset);
-	*dma_done = FALCON_STATS_NOT_DONE;
+	*nic_data->stats_dma_done = FALCON_STATS_NOT_DONE;
+	nic_data->stats_pending = true;
 	wmb(); /* ensure done flag is clear */
 
 	/* Initiate DMA transfer of stats */
 	EFX_POPULATE_OWORD_2(reg,
-			     MAC_STAT_DMA_CMD, 1,
-			     MAC_STAT_DMA_ADR,
+			     FRF_AB_MAC_STAT_DMA_CMD, 1,
+			     FRF_AB_MAC_STAT_DMA_ADR,
 			     efx->stats_buffer.dma_addr);
-	falcon_write(efx, &reg, MAC0_STAT_DMA_REG_KER);
+	efx_writeo(efx, &reg, FR_AB_MAC_STAT_DMA);
 
-	/* Wait for transfer to complete */
-	for (i = 0; i < 400; i++) {
-		if (*(volatile u32 *)dma_done == FALCON_STATS_DONE) {
-			rmb(); /* Ensure the stats are valid. */
-			return 0;
-		}
-		udelay(10);
+	mod_timer(&nic_data->stats_timer, round_jiffies_up(jiffies + HZ / 2));
+}
+
+static void falcon_stats_complete(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
+	if (!nic_data->stats_pending)
+		return;
+
+	nic_data->stats_pending = 0;
+	if (*nic_data->stats_dma_done == FALCON_STATS_DONE) {
+		rmb(); /* read the done flag before the stats */
+		efx->mac_op->update_stats(efx);
+	} else {
+		EFX_ERR(efx, "timed out waiting for statistics\n");
 	}
+}
 
-	EFX_ERR(efx, "timed out waiting for statistics\n");
-	return -ETIMEDOUT;
+static void falcon_stats_timer_func(unsigned long context)
+{
+	struct efx_nic *efx = (struct efx_nic *)context;
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
+	spin_lock(&efx->stats_lock);
+
+	falcon_stats_complete(efx);
+	if (nic_data->stats_disable_count == 0)
+		falcon_stats_request(efx);
+
+	spin_unlock(&efx->stats_lock);
+}
+
+static void falcon_switch_mac(struct efx_nic *efx);
+
+static bool falcon_loopback_link_poll(struct efx_nic *efx)
+{
+	struct efx_link_state old_state = efx->link_state;
+
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+	WARN_ON(!LOOPBACK_INTERNAL(efx));
+
+	efx->link_state.fd = true;
+	efx->link_state.fc = efx->wanted_fc;
+	efx->link_state.up = true;
+
+	if (efx->loopback_mode == LOOPBACK_GMAC)
+		efx->link_state.speed = 1000;
+	else
+		efx->link_state.speed = 10000;
+
+	return !efx_link_state_equal(&efx->link_state, &old_state);
+}
+
+static int falcon_reconfigure_port(struct efx_nic *efx)
+{
+	int rc;
+
+	WARN_ON(efx_nic_rev(efx) > EFX_REV_FALCON_B0);
+
+	/* Poll the PHY link state *before* reconfiguring it. This means we
+	 * will pick up the correct speed (in loopback) to select the correct
+	 * MAC.
+	 */
+	if (LOOPBACK_INTERNAL(efx))
+		falcon_loopback_link_poll(efx);
+	else
+		efx->phy_op->poll(efx);
+
+	falcon_stop_nic_stats(efx);
+	falcon_deconfigure_mac_wrapper(efx);
+
+	falcon_switch_mac(efx);
+
+	efx->phy_op->reconfigure(efx);
+	rc = efx->mac_op->reconfigure(efx);
+	BUG_ON(rc);
+
+	falcon_start_nic_stats(efx);
+
+	/* Synchronise efx->link_state with the kernel */
+	efx_link_status_changed(efx);
+
+	return 0;
 }
 
 /**************************************************************************
@@ -2066,18 +699,18 @@
 /* Wait for GMII access to complete */
 static int falcon_gmii_wait(struct efx_nic *efx)
 {
-	efx_dword_t md_stat;
+	efx_oword_t md_stat;
 	int count;
 
 	/* wait upto 50ms - taken max from datasheet */
 	for (count = 0; count < 5000; count++) {
-		falcon_readl(efx, &md_stat, MD_STAT_REG_KER);
-		if (EFX_DWORD_FIELD(md_stat, MD_BSY) == 0) {
-			if (EFX_DWORD_FIELD(md_stat, MD_LNFL) != 0 ||
-			    EFX_DWORD_FIELD(md_stat, MD_BSERR) != 0) {
+		efx_reado(efx, &md_stat, FR_AB_MD_STAT);
+		if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) {
+			if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_LNFL) != 0 ||
+			    EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSERR) != 0) {
 				EFX_ERR(efx, "error from GMII access "
-					EFX_DWORD_FMT"\n",
-					EFX_DWORD_VAL(md_stat));
+					EFX_OWORD_FMT"\n",
+					EFX_OWORD_VAL(md_stat));
 				return -EIO;
 			}
 			return 0;
@@ -2099,7 +732,7 @@
 	EFX_REGDUMP(efx, "writing MDIO %d register %d.%d with 0x%04x\n",
 		    prtad, devad, addr, value);
 
-	spin_lock_bh(&efx->phy_lock);
+	mutex_lock(&efx->mdio_lock);
 
 	/* Check MDIO not currently being accessed */
 	rc = falcon_gmii_wait(efx);
@@ -2107,34 +740,35 @@
 		goto out;
 
 	/* Write the address/ID register */
-	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
-	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr);
+	efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR);
 
-	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
-	falcon_write(efx, &reg, MD_ID_REG_KER);
+	EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad,
+			     FRF_AB_MD_DEV_ADR, devad);
+	efx_writeo(efx, &reg, FR_AB_MD_ID);
 
 	/* Write data */
-	EFX_POPULATE_OWORD_1(reg, MD_TXD, value);
-	falcon_write(efx, &reg, MD_TXD_REG_KER);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_TXD, value);
+	efx_writeo(efx, &reg, FR_AB_MD_TXD);
 
 	EFX_POPULATE_OWORD_2(reg,
-			     MD_WRC, 1,
-			     MD_GC, 0);
-	falcon_write(efx, &reg, MD_CS_REG_KER);
+			     FRF_AB_MD_WRC, 1,
+			     FRF_AB_MD_GC, 0);
+	efx_writeo(efx, &reg, FR_AB_MD_CS);
 
 	/* Wait for data to be written */
 	rc = falcon_gmii_wait(efx);
 	if (rc) {
 		/* Abort the write operation */
 		EFX_POPULATE_OWORD_2(reg,
-				     MD_WRC, 0,
-				     MD_GC, 1);
-		falcon_write(efx, &reg, MD_CS_REG_KER);
+				     FRF_AB_MD_WRC, 0,
+				     FRF_AB_MD_GC, 1);
+		efx_writeo(efx, &reg, FR_AB_MD_CS);
 		udelay(10);
 	}
 
- out:
-	spin_unlock_bh(&efx->phy_lock);
+out:
+	mutex_unlock(&efx->mdio_lock);
 	return rc;
 }
 
@@ -2146,48 +780,101 @@
 	efx_oword_t reg;
 	int rc;
 
-	spin_lock_bh(&efx->phy_lock);
+	mutex_lock(&efx->mdio_lock);
 
 	/* Check MDIO not currently being accessed */
 	rc = falcon_gmii_wait(efx);
 	if (rc)
 		goto out;
 
-	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
-	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr);
+	efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR);
 
-	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
-	falcon_write(efx, &reg, MD_ID_REG_KER);
+	EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad,
+			     FRF_AB_MD_DEV_ADR, devad);
+	efx_writeo(efx, &reg, FR_AB_MD_ID);
 
 	/* Request data to be read */
-	EFX_POPULATE_OWORD_2(reg, MD_RDC, 1, MD_GC, 0);
-	falcon_write(efx, &reg, MD_CS_REG_KER);
+	EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_RDC, 1, FRF_AB_MD_GC, 0);
+	efx_writeo(efx, &reg, FR_AB_MD_CS);
 
 	/* Wait for data to become available */
 	rc = falcon_gmii_wait(efx);
 	if (rc == 0) {
-		falcon_read(efx, &reg, MD_RXD_REG_KER);
-		rc = EFX_OWORD_FIELD(reg, MD_RXD);
+		efx_reado(efx, &reg, FR_AB_MD_RXD);
+		rc = EFX_OWORD_FIELD(reg, FRF_AB_MD_RXD);
 		EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n",
 			    prtad, devad, addr, rc);
 	} else {
 		/* Abort the read operation */
 		EFX_POPULATE_OWORD_2(reg,
-				     MD_RIC, 0,
-				     MD_GC, 1);
-		falcon_write(efx, &reg, MD_CS_REG_KER);
+				     FRF_AB_MD_RIC, 0,
+				     FRF_AB_MD_GC, 1);
+		efx_writeo(efx, &reg, FR_AB_MD_CS);
 
 		EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n",
 			prtad, devad, addr, rc);
 	}
 
- out:
-	spin_unlock_bh(&efx->phy_lock);
+out:
+	mutex_unlock(&efx->mdio_lock);
 	return rc;
 }
 
-static int falcon_probe_phy(struct efx_nic *efx)
+static void falcon_clock_mac(struct efx_nic *efx)
 {
+	unsigned strap_val;
+	efx_oword_t nic_stat;
+
+	/* Configure the NIC generated MAC clock correctly */
+	efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
+	strap_val = EFX_IS10G(efx) ? 5 : 3;
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) {
+		EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP_EN, 1);
+		EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP, strap_val);
+		efx_writeo(efx, &nic_stat, FR_AB_NIC_STAT);
+	} else {
+		/* Falcon A1 does not support 1G/10G speed switching
+		 * and must not be used with a PHY that does. */
+		BUG_ON(EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_PINS) !=
+		       strap_val);
+	}
+}
+
+static void falcon_switch_mac(struct efx_nic *efx)
+{
+	struct efx_mac_operations *old_mac_op = efx->mac_op;
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	unsigned int stats_done_offset;
+
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+	WARN_ON(nic_data->stats_disable_count == 0);
+
+	efx->mac_op = (EFX_IS10G(efx) ?
+		       &falcon_xmac_operations : &falcon_gmac_operations);
+
+	if (EFX_IS10G(efx))
+		stats_done_offset = XgDmaDone_offset;
+	else
+		stats_done_offset = GDmaDone_offset;
+	nic_data->stats_dma_done = efx->stats_buffer.addr + stats_done_offset;
+
+	if (old_mac_op == efx->mac_op)
+		return;
+
+	falcon_clock_mac(efx);
+
+	EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G');
+	/* Not all macs support a mac-level link state */
+	efx->xmac_poll_required = false;
+	falcon_reset_macs(efx);
+}
+
+/* This call is responsible for hooking in the MAC and PHY operations */
+static int falcon_probe_port(struct efx_nic *efx)
+{
+	int rc;
+
 	switch (efx->phy_type) {
 	case PHY_TYPE_SFX7101:
 		efx->phy_op = &falcon_sfx7101_phy_ops;
@@ -2198,100 +885,34 @@
 		break;
 	case PHY_TYPE_QT2022C2:
 	case PHY_TYPE_QT2025C:
-		efx->phy_op = &falcon_xfp_phy_ops;
+		efx->phy_op = &falcon_qt202x_phy_ops;
 		break;
 	default:
 		EFX_ERR(efx, "Unknown PHY type %d\n",
 			efx->phy_type);
-		return -1;
+		return -ENODEV;
 	}
 
-	if (efx->phy_op->macs & EFX_XMAC)
-		efx->loopback_modes |= ((1 << LOOPBACK_XGMII) |
-					(1 << LOOPBACK_XGXS) |
-					(1 << LOOPBACK_XAUI));
-	if (efx->phy_op->macs & EFX_GMAC)
-		efx->loopback_modes |= (1 << LOOPBACK_GMAC);
-	efx->loopback_modes |= efx->phy_op->loopbacks;
-
-	return 0;
-}
-
-int falcon_switch_mac(struct efx_nic *efx)
-{
-	struct efx_mac_operations *old_mac_op = efx->mac_op;
-	efx_oword_t nic_stat;
-	unsigned strap_val;
-	int rc = 0;
-
-	/* Don't try to fetch MAC stats while we're switching MACs */
-	efx_stats_disable(efx);
-
-	/* Internal loopbacks override the phy speed setting */
-	if (efx->loopback_mode == LOOPBACK_GMAC) {
-		efx->link_speed = 1000;
-		efx->link_fd = true;
-	} else if (LOOPBACK_INTERNAL(efx)) {
-		efx->link_speed = 10000;
-		efx->link_fd = true;
-	}
-
-	WARN_ON(!mutex_is_locked(&efx->mac_lock));
-	efx->mac_op = (EFX_IS10G(efx) ?
-		       &falcon_xmac_operations : &falcon_gmac_operations);
-
-	/* Always push the NIC_STAT_REG setting even if the mac hasn't
-	 * changed, because this function is run post online reset */
-	falcon_read(efx, &nic_stat, NIC_STAT_REG);
-	strap_val = EFX_IS10G(efx) ? 5 : 3;
-	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		EFX_SET_OWORD_FIELD(nic_stat, EE_STRAP_EN, 1);
-		EFX_SET_OWORD_FIELD(nic_stat, EE_STRAP_OVR, strap_val);
-		falcon_write(efx, &nic_stat, NIC_STAT_REG);
-	} else {
-		/* Falcon A1 does not support 1G/10G speed switching
-		 * and must not be used with a PHY that does. */
-		BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val);
-	}
-
-	if (old_mac_op == efx->mac_op)
-		goto out;
-
-	EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G');
-	/* Not all macs support a mac-level link state */
-	efx->mac_up = true;
-
-	rc = falcon_reset_macs(efx);
-out:
-	efx_stats_enable(efx);
-	return rc;
-}
-
-/* This call is responsible for hooking in the MAC and PHY operations */
-int falcon_probe_port(struct efx_nic *efx)
-{
-	int rc;
-
-	/* Hook in PHY operations table */
-	rc = falcon_probe_phy(efx);
-	if (rc)
-		return rc;
-
-	/* Set up MDIO structure for PHY */
-	efx->mdio.mmds = efx->phy_op->mmds;
-	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	/* Fill out MDIO structure and loopback modes */
 	efx->mdio.mdio_read = falcon_mdio_read;
 	efx->mdio.mdio_write = falcon_mdio_write;
+	rc = efx->phy_op->probe(efx);
+	if (rc != 0)
+		return rc;
+
+	/* Initial assumption */
+	efx->link_state.speed = 10000;
+	efx->link_state.fd = true;
 
 	/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
-	if (falcon_rev(efx) >= FALCON_REV_B0)
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
 		efx->wanted_fc = EFX_FC_RX | EFX_FC_TX;
 	else
 		efx->wanted_fc = EFX_FC_RX;
 
 	/* Allocate buffer for stats */
-	rc = falcon_alloc_buffer(efx, &efx->stats_buffer,
-				 FALCON_MAC_STATS_SIZE);
+	rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer,
+				  FALCON_MAC_STATS_SIZE);
 	if (rc)
 		return rc;
 	EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n",
@@ -2302,40 +923,19 @@
 	return 0;
 }
 
-void falcon_remove_port(struct efx_nic *efx)
+static void falcon_remove_port(struct efx_nic *efx)
 {
-	falcon_free_buffer(efx, &efx->stats_buffer);
+	efx_nic_free_buffer(efx, &efx->stats_buffer);
 }
 
 /**************************************************************************
  *
- * Multicast filtering
- *
- **************************************************************************
- */
-
-void falcon_set_multicast_hash(struct efx_nic *efx)
-{
-	union efx_multicast_hash *mc_hash = &efx->multicast_hash;
-
-	/* Broadcast packets go through the multicast hash filter.
-	 * ether_crc_le() of the broadcast address is 0xbe2612ff
-	 * so we always add bit 0xff to the mask.
-	 */
-	set_bit_le(0xff, mc_hash->byte);
-
-	falcon_write(efx, &mc_hash->oword[0], MAC_MCAST_HASH_REG0_KER);
-	falcon_write(efx, &mc_hash->oword[1], MAC_MCAST_HASH_REG1_KER);
-}
-
-
-/**************************************************************************
- *
  * Falcon test code
  *
  **************************************************************************/
 
-int falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
+static int
+falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
 {
 	struct falcon_nvconfig *nvconfig;
 	struct efx_spi_device *spi;
@@ -2351,10 +951,10 @@
 	region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL);
 	if (!region)
 		return -ENOMEM;
-	nvconfig = region + NVCONFIG_OFFSET;
+	nvconfig = region + FALCON_NVCONFIG_OFFSET;
 
 	mutex_lock(&efx->spi_lock);
-	rc = falcon_spi_read(spi, 0, FALCON_NVCONFIG_END, NULL, region);
+	rc = falcon_spi_read(efx, spi, 0, FALCON_NVCONFIG_END, NULL, region);
 	mutex_unlock(&efx->spi_lock);
 	if (rc) {
 		EFX_ERR(efx, "Failed to read %s\n",
@@ -2367,7 +967,7 @@
 	struct_ver = le16_to_cpu(nvconfig->board_struct_ver);
 
 	rc = -EINVAL;
-	if (magic_num != NVCONFIG_BOARD_MAGIC_NUM) {
+	if (magic_num != FALCON_NVCONFIG_BOARD_MAGIC_NUM) {
 		EFX_ERR(efx, "NVRAM bad magic 0x%x\n", magic_num);
 		goto out;
 	}
@@ -2398,107 +998,54 @@
 	return rc;
 }
 
-/* Registers tested in the falcon register test */
-static struct {
-	unsigned address;
-	efx_oword_t mask;
-} efx_test_registers[] = {
-	{ ADR_REGION_REG_KER,
+static int falcon_test_nvram(struct efx_nic *efx)
+{
+	return falcon_read_nvram(efx, NULL);
+}
+
+static const struct efx_nic_register_test falcon_b0_register_tests[] = {
+	{ FR_AZ_ADR_REGION,
 	  EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) },
-	{ RX_CFG_REG_KER,
+	{ FR_AZ_RX_CFG,
 	  EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) },
-	{ TX_CFG_REG_KER,
+	{ FR_AZ_TX_CFG,
 	  EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) },
-	{ TX_CFG2_REG_KER,
+	{ FR_AZ_TX_RESERVED,
 	  EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) },
-	{ MAC0_CTRL_REG_KER,
+	{ FR_AB_MAC_CTRL,
 	  EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) },
-	{ SRM_TX_DC_CFG_REG_KER,
+	{ FR_AZ_SRM_TX_DC_CFG,
 	  EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) },
-	{ RX_DC_CFG_REG_KER,
+	{ FR_AZ_RX_DC_CFG,
 	  EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) },
-	{ RX_DC_PF_WM_REG_KER,
+	{ FR_AZ_RX_DC_PF_WM,
 	  EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) },
-	{ DP_CTRL_REG,
+	{ FR_BZ_DP_CTRL,
 	  EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) },
-	{ GM_CFG2_REG,
+	{ FR_AB_GM_CFG2,
 	  EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) },
-	{ GMF_CFG0_REG,
+	{ FR_AB_GMF_CFG0,
 	  EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_GLB_CFG_REG,
+	{ FR_AB_XM_GLB_CFG,
 	  EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_TX_CFG_REG,
+	{ FR_AB_XM_TX_CFG,
 	  EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_RX_CFG_REG,
+	{ FR_AB_XM_RX_CFG,
 	  EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_RX_PARAM_REG,
+	{ FR_AB_XM_RX_PARAM,
 	  EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_FC_REG,
+	{ FR_AB_XM_FC,
 	  EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_ADR_LO_REG,
+	{ FR_AB_XM_ADR_LO,
 	  EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) },
-	{ XX_SD_CTL_REG,
+	{ FR_AB_XX_SD_CTL,
 	  EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) },
 };
 
-static bool efx_masked_compare_oword(const efx_oword_t *a, const efx_oword_t *b,
-				     const efx_oword_t *mask)
+static int falcon_b0_test_registers(struct efx_nic *efx)
 {
-	return ((a->u64[0] ^ b->u64[0]) & mask->u64[0]) ||
-		((a->u64[1] ^ b->u64[1]) & mask->u64[1]);
-}
-
-int falcon_test_registers(struct efx_nic *efx)
-{
-	unsigned address = 0, i, j;
-	efx_oword_t mask, imask, original, reg, buf;
-
-	/* Falcon should be in loopback to isolate the XMAC from the PHY */
-	WARN_ON(!LOOPBACK_INTERNAL(efx));
-
-	for (i = 0; i < ARRAY_SIZE(efx_test_registers); ++i) {
-		address = efx_test_registers[i].address;
-		mask = imask = efx_test_registers[i].mask;
-		EFX_INVERT_OWORD(imask);
-
-		falcon_read(efx, &original, address);
-
-		/* bit sweep on and off */
-		for (j = 0; j < 128; j++) {
-			if (!EFX_EXTRACT_OWORD32(mask, j, j))
-				continue;
-
-			/* Test this testable bit can be set in isolation */
-			EFX_AND_OWORD(reg, original, mask);
-			EFX_SET_OWORD32(reg, j, j, 1);
-
-			falcon_write(efx, &reg, address);
-			falcon_read(efx, &buf, address);
-
-			if (efx_masked_compare_oword(&reg, &buf, &mask))
-				goto fail;
-
-			/* Test this testable bit can be cleared in isolation */
-			EFX_OR_OWORD(reg, original, mask);
-			EFX_SET_OWORD32(reg, j, j, 0);
-
-			falcon_write(efx, &reg, address);
-			falcon_read(efx, &buf, address);
-
-			if (efx_masked_compare_oword(&reg, &buf, &mask))
-				goto fail;
-		}
-
-		falcon_write(efx, &original, address);
-	}
-
-	return 0;
-
-fail:
-	EFX_ERR(efx, "wrote "EFX_OWORD_FMT" read "EFX_OWORD_FMT
-		" at address 0x%x mask "EFX_OWORD_FMT"\n", EFX_OWORD_VAL(reg),
-		EFX_OWORD_VAL(buf), address, EFX_OWORD_VAL(mask));
-	return -EIO;
+	return efx_nic_test_registers(efx, falcon_b0_register_tests,
+				      ARRAY_SIZE(falcon_b0_register_tests));
 }
 
 /**************************************************************************
@@ -2510,13 +1057,13 @@
 
 /* Resets NIC to known state.  This routine must be called in process
  * context and is allowed to sleep. */
-int falcon_reset_hw(struct efx_nic *efx, enum reset_type method)
+static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method)
 {
 	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t glb_ctl_reg_ker;
 	int rc;
 
-	EFX_LOG(efx, "performing hardware reset (%d)\n", method);
+	EFX_LOG(efx, "performing %s hardware reset\n", RESET_TYPE(method));
 
 	/* Initiate device reset */
 	if (method == RESET_TYPE_WORLD) {
@@ -2526,7 +1073,7 @@
 				"function prior to hardware reset\n");
 			goto fail1;
 		}
-		if (FALCON_IS_DUAL_FUNC(efx)) {
+		if (efx_nic_is_dual_func(efx)) {
 			rc = pci_save_state(nic_data->pci_dev2);
 			if (rc) {
 				EFX_ERR(efx, "failed to backup PCI state of "
@@ -2537,29 +1084,31 @@
 		}
 
 		EFX_POPULATE_OWORD_2(glb_ctl_reg_ker,
-				     EXT_PHY_RST_DUR, 0x7,
-				     SWRST, 1);
+				     FRF_AB_EXT_PHY_RST_DUR,
+				     FFE_AB_EXT_PHY_RST_DUR_10240US,
+				     FRF_AB_SWRST, 1);
 	} else {
-		int reset_phy = (method == RESET_TYPE_INVISIBLE ?
-				 EXCLUDE_FROM_RESET : 0);
-
 		EFX_POPULATE_OWORD_7(glb_ctl_reg_ker,
-				     EXT_PHY_RST_CTL, reset_phy,
-				     PCIE_CORE_RST_CTL, EXCLUDE_FROM_RESET,
-				     PCIE_NSTCK_RST_CTL, EXCLUDE_FROM_RESET,
-				     PCIE_SD_RST_CTL, EXCLUDE_FROM_RESET,
-				     EE_RST_CTL, EXCLUDE_FROM_RESET,
-				     EXT_PHY_RST_DUR, 0x7 /* 10ms */,
-				     SWRST, 1);
+				     /* exclude PHY from "invisible" reset */
+				     FRF_AB_EXT_PHY_RST_CTL,
+				     method == RESET_TYPE_INVISIBLE,
+				     /* exclude EEPROM/flash and PCIe */
+				     FRF_AB_PCIE_CORE_RST_CTL, 1,
+				     FRF_AB_PCIE_NSTKY_RST_CTL, 1,
+				     FRF_AB_PCIE_SD_RST_CTL, 1,
+				     FRF_AB_EE_RST_CTL, 1,
+				     FRF_AB_EXT_PHY_RST_DUR,
+				     FFE_AB_EXT_PHY_RST_DUR_10240US,
+				     FRF_AB_SWRST, 1);
 	}
-	falcon_write(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER);
+	efx_writeo(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL);
 
 	EFX_LOG(efx, "waiting for hardware reset\n");
 	schedule_timeout_uninterruptible(HZ / 20);
 
 	/* Restore PCI configuration if needed */
 	if (method == RESET_TYPE_WORLD) {
-		if (FALCON_IS_DUAL_FUNC(efx)) {
+		if (efx_nic_is_dual_func(efx)) {
 			rc = pci_restore_state(nic_data->pci_dev2);
 			if (rc) {
 				EFX_ERR(efx, "failed to restore PCI config for "
@@ -2577,8 +1126,8 @@
 	}
 
 	/* Assert that reset complete */
-	falcon_read(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER);
-	if (EFX_OWORD_FIELD(glb_ctl_reg_ker, SWRST) != 0) {
+	efx_reado(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL);
+	if (EFX_OWORD_FIELD(glb_ctl_reg_ker, FRF_AB_SWRST) != 0) {
 		rc = -ETIMEDOUT;
 		EFX_ERR(efx, "timed out waiting for hardware reset\n");
 		goto fail5;
@@ -2597,6 +1146,44 @@
 	return rc;
 }
 
+static void falcon_monitor(struct efx_nic *efx)
+{
+	bool link_changed;
+	int rc;
+
+	BUG_ON(!mutex_is_locked(&efx->mac_lock));
+
+	rc = falcon_board(efx)->type->monitor(efx);
+	if (rc) {
+		EFX_ERR(efx, "Board sensor %s; shutting down PHY\n",
+			(rc == -ERANGE) ? "reported fault" : "failed");
+		efx->phy_mode |= PHY_MODE_LOW_POWER;
+		rc = __efx_reconfigure_port(efx);
+		WARN_ON(rc);
+	}
+
+	if (LOOPBACK_INTERNAL(efx))
+		link_changed = falcon_loopback_link_poll(efx);
+	else
+		link_changed = efx->phy_op->poll(efx);
+
+	if (link_changed) {
+		falcon_stop_nic_stats(efx);
+		falcon_deconfigure_mac_wrapper(efx);
+
+		falcon_switch_mac(efx);
+		rc = efx->mac_op->reconfigure(efx);
+		BUG_ON(rc);
+
+		falcon_start_nic_stats(efx);
+
+		efx_link_status_changed(efx);
+	}
+
+	if (EFX_IS10G(efx))
+		falcon_poll_xmac(efx);
+}
+
 /* Zeroes out the SRAM contents.  This routine must be called in
  * process context and is allowed to sleep.
  */
@@ -2606,16 +1193,16 @@
 	int count;
 
 	/* Set the SRAM wake/sleep GPIO appropriately. */
-	falcon_read(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OEN, 1);
-	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OUT, 1);
-	falcon_write(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER);
+	efx_reado(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OEN, 1);
+	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OUT, 1);
+	efx_writeo(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL);
 
 	/* Initiate SRAM reset */
 	EFX_POPULATE_OWORD_2(srm_cfg_reg_ker,
-			     SRAM_OOB_BT_INIT_EN, 1,
-			     SRM_NUM_BANKS_AND_BANK_SIZE, 0);
-	falcon_write(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER);
+			     FRF_AZ_SRM_INIT_EN, 1,
+			     FRF_AZ_SRM_NB_SZ, 0);
+	efx_writeo(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG);
 
 	/* Wait for SRAM reset to complete */
 	count = 0;
@@ -2626,8 +1213,8 @@
 		schedule_timeout_uninterruptible(HZ / 50);
 
 		/* Check for reset complete */
-		falcon_read(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER);
-		if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, SRAM_OOB_BT_INIT_EN)) {
+		efx_reado(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG);
+		if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, FRF_AZ_SRM_INIT_EN)) {
 			EFX_LOG(efx, "SRAM reset complete\n");
 
 			return 0;
@@ -2663,8 +1250,6 @@
 		spi_device->block_size =
 			1 << SPI_DEV_TYPE_FIELD(device_type,
 						SPI_DEV_TYPE_BLOCK_SIZE);
-
-		spi_device->efx = efx;
 	} else {
 		spi_device = NULL;
 	}
@@ -2674,7 +1259,6 @@
 	return 0;
 }
 
-
 static void falcon_remove_spi_devices(struct efx_nic *efx)
 {
 	kfree(efx->spi_eeprom);
@@ -2712,16 +1296,16 @@
 		board_rev = le16_to_cpu(v2->board_revision);
 
 		if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
-			__le32 fl = v3->spi_device_type[EE_SPI_FLASH];
-			__le32 ee = v3->spi_device_type[EE_SPI_EEPROM];
-			rc = falcon_spi_device_init(efx, &efx->spi_flash,
-						    EE_SPI_FLASH,
-						    le32_to_cpu(fl));
+			rc = falcon_spi_device_init(
+				efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH,
+				le32_to_cpu(v3->spi_device_type
+					    [FFE_AB_SPI_DEVICE_FLASH]));
 			if (rc)
 				goto fail2;
-			rc = falcon_spi_device_init(efx, &efx->spi_eeprom,
-						    EE_SPI_EEPROM,
-						    le32_to_cpu(ee));
+			rc = falcon_spi_device_init(
+				efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM,
+				le32_to_cpu(v3->spi_device_type
+					    [FFE_AB_SPI_DEVICE_EEPROM]));
 			if (rc)
 				goto fail2;
 		}
@@ -2732,7 +1316,7 @@
 
 	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad);
 
-	efx_set_board_info(efx, board_rev);
+	falcon_probe_board(efx, board_rev);
 
 	kfree(nvconfig);
 	return 0;
@@ -2744,89 +1328,49 @@
 	return rc;
 }
 
-/* Probe the NIC variant (revision, ASIC vs FPGA, function count, port
- * count, port speed).  Set workaround and feature flags accordingly.
- */
-static int falcon_probe_nic_variant(struct efx_nic *efx)
-{
-	efx_oword_t altera_build;
-	efx_oword_t nic_stat;
-
-	falcon_read(efx, &altera_build, ALTERA_BUILD_REG_KER);
-	if (EFX_OWORD_FIELD(altera_build, VER_ALL)) {
-		EFX_ERR(efx, "Falcon FPGA not supported\n");
-		return -ENODEV;
-	}
-
-	falcon_read(efx, &nic_stat, NIC_STAT_REG);
-
-	switch (falcon_rev(efx)) {
-	case FALCON_REV_A0:
-	case 0xff:
-		EFX_ERR(efx, "Falcon rev A0 not supported\n");
-		return -ENODEV;
-
-	case FALCON_REV_A1:
-		if (EFX_OWORD_FIELD(nic_stat, STRAP_PCIE) == 0) {
-			EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n");
-			return -ENODEV;
-		}
-		break;
-
-	case FALCON_REV_B0:
-		break;
-
-	default:
-		EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx));
-		return -ENODEV;
-	}
-
-	/* Initial assumed speed */
-	efx->link_speed = EFX_OWORD_FIELD(nic_stat, STRAP_10G) ? 10000 : 1000;
-
-	return 0;
-}
-
 /* Probe all SPI devices on the NIC */
 static void falcon_probe_spi_devices(struct efx_nic *efx)
 {
 	efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg;
 	int boot_dev;
 
-	falcon_read(efx, &gpio_ctl, GPIO_CTL_REG_KER);
-	falcon_read(efx, &nic_stat, NIC_STAT_REG);
-	falcon_read(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER);
+	efx_reado(efx, &gpio_ctl, FR_AB_GPIO_CTL);
+	efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
+	efx_reado(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0);
 
-	if (EFX_OWORD_FIELD(gpio_ctl, BOOTED_USING_NVDEVICE)) {
-		boot_dev = (EFX_OWORD_FIELD(nic_stat, SF_PRST) ?
-			    EE_SPI_FLASH : EE_SPI_EEPROM);
+	if (EFX_OWORD_FIELD(gpio_ctl, FRF_AB_GPIO3_PWRUP_VALUE)) {
+		boot_dev = (EFX_OWORD_FIELD(nic_stat, FRF_AB_SF_PRST) ?
+			    FFE_AB_SPI_DEVICE_FLASH : FFE_AB_SPI_DEVICE_EEPROM);
 		EFX_LOG(efx, "Booted from %s\n",
-			boot_dev == EE_SPI_FLASH ? "flash" : "EEPROM");
+			boot_dev == FFE_AB_SPI_DEVICE_FLASH ? "flash" : "EEPROM");
 	} else {
 		/* Disable VPD and set clock dividers to safe
 		 * values for initial programming. */
 		boot_dev = -1;
 		EFX_LOG(efx, "Booted from internal ASIC settings;"
 			" setting SPI config\n");
-		EFX_POPULATE_OWORD_3(ee_vpd_cfg, EE_VPD_EN, 0,
+		EFX_POPULATE_OWORD_3(ee_vpd_cfg, FRF_AB_EE_VPD_EN, 0,
 				     /* 125 MHz / 7 ~= 20 MHz */
-				     EE_SF_CLOCK_DIV, 7,
+				     FRF_AB_EE_SF_CLOCK_DIV, 7,
 				     /* 125 MHz / 63 ~= 2 MHz */
-				     EE_EE_CLOCK_DIV, 63);
-		falcon_write(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER);
+				     FRF_AB_EE_EE_CLOCK_DIV, 63);
+		efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0);
 	}
 
-	if (boot_dev == EE_SPI_FLASH)
-		falcon_spi_device_init(efx, &efx->spi_flash, EE_SPI_FLASH,
+	if (boot_dev == FFE_AB_SPI_DEVICE_FLASH)
+		falcon_spi_device_init(efx, &efx->spi_flash,
+				       FFE_AB_SPI_DEVICE_FLASH,
 				       default_flash_type);
-	if (boot_dev == EE_SPI_EEPROM)
-		falcon_spi_device_init(efx, &efx->spi_eeprom, EE_SPI_EEPROM,
+	if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM)
+		falcon_spi_device_init(efx, &efx->spi_eeprom,
+				       FFE_AB_SPI_DEVICE_EEPROM,
 				       large_eeprom_type);
 }
 
-int falcon_probe_nic(struct efx_nic *efx)
+static int falcon_probe_nic(struct efx_nic *efx)
 {
 	struct falcon_nic_data *nic_data;
+	struct falcon_board *board;
 	int rc;
 
 	/* Allocate storage for hardware specific data */
@@ -2835,15 +1379,33 @@
 		return -ENOMEM;
 	efx->nic_data = nic_data;
 
-	/* Determine number of ports etc. */
-	rc = falcon_probe_nic_variant(efx);
-	if (rc)
+	rc = -ENODEV;
+
+	if (efx_nic_fpga_ver(efx) != 0) {
+		EFX_ERR(efx, "Falcon FPGA not supported\n");
 		goto fail1;
+	}
 
-	/* Probe secondary function if expected */
-	if (FALCON_IS_DUAL_FUNC(efx)) {
-		struct pci_dev *dev = pci_dev_get(efx->pci_dev);
+	if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) {
+		efx_oword_t nic_stat;
+		struct pci_dev *dev;
+		u8 pci_rev = efx->pci_dev->revision;
 
+		if ((pci_rev == 0xff) || (pci_rev == 0)) {
+			EFX_ERR(efx, "Falcon rev A0 not supported\n");
+			goto fail1;
+		}
+		efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
+		if (EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) == 0) {
+			EFX_ERR(efx, "Falcon rev A1 1G not supported\n");
+			goto fail1;
+		}
+		if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) {
+			EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n");
+			goto fail1;
+		}
+
+		dev = pci_dev_get(efx->pci_dev);
 		while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID,
 					     dev))) {
 			if (dev->bus == efx->pci_dev->bus &&
@@ -2867,7 +1429,7 @@
 	}
 
 	/* Allocate memory for INT_KER */
-	rc = falcon_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t));
+	rc = efx_nic_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t));
 	if (rc)
 		goto fail4;
 	BUG_ON(efx->irq_status.dma_addr & 0x0f);
@@ -2884,21 +1446,36 @@
 		goto fail5;
 
 	/* Initialise I2C adapter */
-	efx->i2c_adap.owner = THIS_MODULE;
-	nic_data->i2c_data = falcon_i2c_bit_operations;
-	nic_data->i2c_data.data = efx;
-	efx->i2c_adap.algo_data = &nic_data->i2c_data;
-	efx->i2c_adap.dev.parent = &efx->pci_dev->dev;
-	strlcpy(efx->i2c_adap.name, "SFC4000 GPIO", sizeof(efx->i2c_adap.name));
-	rc = i2c_bit_add_bus(&efx->i2c_adap);
+	board = falcon_board(efx);
+	board->i2c_adap.owner = THIS_MODULE;
+	board->i2c_data = falcon_i2c_bit_operations;
+	board->i2c_data.data = efx;
+	board->i2c_adap.algo_data = &board->i2c_data;
+	board->i2c_adap.dev.parent = &efx->pci_dev->dev;
+	strlcpy(board->i2c_adap.name, "SFC4000 GPIO",
+		sizeof(board->i2c_adap.name));
+	rc = i2c_bit_add_bus(&board->i2c_adap);
 	if (rc)
 		goto fail5;
 
+	rc = falcon_board(efx)->type->init(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to initialise board\n");
+		goto fail6;
+	}
+
+	nic_data->stats_disable_count = 1;
+	setup_timer(&nic_data->stats_timer, &falcon_stats_timer_func,
+		    (unsigned long)efx);
+
 	return 0;
 
+ fail6:
+	BUG_ON(i2c_del_adapter(&board->i2c_adap));
+	memset(&board->i2c_adap, 0, sizeof(board->i2c_adap));
  fail5:
 	falcon_remove_spi_devices(efx);
-	falcon_free_buffer(efx, &efx->irq_status);
+	efx_nic_free_buffer(efx, &efx->irq_status);
  fail4:
  fail3:
 	if (nic_data->pci_dev2) {
@@ -2911,166 +1488,147 @@
 	return rc;
 }
 
+static void falcon_init_rx_cfg(struct efx_nic *efx)
+{
+	/* Prior to Siena the RX DMA engine will split each frame at
+	 * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to
+	 * be so large that that never happens. */
+	const unsigned huge_buf_size = (3 * 4096) >> 5;
+	/* RX control FIFO thresholds (32 entries) */
+	const unsigned ctrl_xon_thr = 20;
+	const unsigned ctrl_xoff_thr = 25;
+	/* RX data FIFO thresholds (256-byte units; size varies) */
+	int data_xon_thr = efx_nic_rx_xon_thresh >> 8;
+	int data_xoff_thr = efx_nic_rx_xoff_thresh >> 8;
+	efx_oword_t reg;
+
+	efx_reado(efx, &reg, FR_AZ_RX_CFG);
+	if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1) {
+		/* Data FIFO size is 5.5K */
+		if (data_xon_thr < 0)
+			data_xon_thr = 512 >> 8;
+		if (data_xoff_thr < 0)
+			data_xoff_thr = 2048 >> 8;
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE,
+				    huge_buf_size);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, data_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, data_xoff_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_TX_TH, ctrl_xoff_thr);
+	} else {
+		/* Data FIFO size is 80K; register fields moved */
+		if (data_xon_thr < 0)
+			data_xon_thr = 27648 >> 8; /* ~3*max MTU */
+		if (data_xoff_thr < 0)
+			data_xoff_thr = 54272 >> 8; /* ~80Kb - 3*max MTU */
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE,
+				    huge_buf_size);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, data_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, data_xoff_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_TX_TH, ctrl_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1);
+	}
+	/* Always enable XOFF signal from RX FIFO.  We enable
+	 * or disable transmission of pause frames at the MAC. */
+	EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, 1);
+	efx_writeo(efx, &reg, FR_AZ_RX_CFG);
+}
+
 /* This call performs hardware-specific global initialisation, such as
  * defining the descriptor cache sizes and number of RSS channels.
  * It does not set up any buffers, descriptor rings or event queues.
  */
-int falcon_init_nic(struct efx_nic *efx)
+static int falcon_init_nic(struct efx_nic *efx)
 {
 	efx_oword_t temp;
-	unsigned thresh;
 	int rc;
 
 	/* Use on-chip SRAM */
-	falcon_read(efx, &temp, NIC_STAT_REG);
-	EFX_SET_OWORD_FIELD(temp, ONCHIP_SRAM, 1);
-	falcon_write(efx, &temp, NIC_STAT_REG);
+	efx_reado(efx, &temp, FR_AB_NIC_STAT);
+	EFX_SET_OWORD_FIELD(temp, FRF_AB_ONCHIP_SRAM, 1);
+	efx_writeo(efx, &temp, FR_AB_NIC_STAT);
 
 	/* Set the source of the GMAC clock */
-	if (falcon_rev(efx) == FALCON_REV_B0) {
-		falcon_read(efx, &temp, GPIO_CTL_REG_KER);
-		EFX_SET_OWORD_FIELD(temp, GPIO_USE_NIC_CLK, true);
-		falcon_write(efx, &temp, GPIO_CTL_REG_KER);
+	if (efx_nic_rev(efx) == EFX_REV_FALCON_B0) {
+		efx_reado(efx, &temp, FR_AB_GPIO_CTL);
+		EFX_SET_OWORD_FIELD(temp, FRF_AB_USE_NIC_CLK, true);
+		efx_writeo(efx, &temp, FR_AB_GPIO_CTL);
 	}
 
-	/* Set buffer table mode */
-	EFX_POPULATE_OWORD_1(temp, BUF_TBL_MODE, BUF_TBL_MODE_FULL);
-	falcon_write(efx, &temp, BUF_TBL_CFG_REG_KER);
+	/* Select the correct MAC */
+	falcon_clock_mac(efx);
 
 	rc = falcon_reset_sram(efx);
 	if (rc)
 		return rc;
 
-	/* Set positions of descriptor caches in SRAM. */
-	EFX_POPULATE_OWORD_1(temp, SRM_TX_DC_BASE_ADR, TX_DC_BASE / 8);
-	falcon_write(efx, &temp, SRM_TX_DC_CFG_REG_KER);
-	EFX_POPULATE_OWORD_1(temp, SRM_RX_DC_BASE_ADR, RX_DC_BASE / 8);
-	falcon_write(efx, &temp, SRM_RX_DC_CFG_REG_KER);
-
-	/* Set TX descriptor cache size. */
-	BUILD_BUG_ON(TX_DC_ENTRIES != (16 << TX_DC_ENTRIES_ORDER));
-	EFX_POPULATE_OWORD_1(temp, TX_DC_SIZE, TX_DC_ENTRIES_ORDER);
-	falcon_write(efx, &temp, TX_DC_CFG_REG_KER);
-
-	/* Set RX descriptor cache size.  Set low watermark to size-8, as
-	 * this allows most efficient prefetching.
-	 */
-	BUILD_BUG_ON(RX_DC_ENTRIES != (16 << RX_DC_ENTRIES_ORDER));
-	EFX_POPULATE_OWORD_1(temp, RX_DC_SIZE, RX_DC_ENTRIES_ORDER);
-	falcon_write(efx, &temp, RX_DC_CFG_REG_KER);
-	EFX_POPULATE_OWORD_1(temp, RX_DC_PF_LWM, RX_DC_ENTRIES - 8);
-	falcon_write(efx, &temp, RX_DC_PF_WM_REG_KER);
-
 	/* Clear the parity enables on the TX data fifos as
 	 * they produce false parity errors because of timing issues
 	 */
 	if (EFX_WORKAROUND_5129(efx)) {
-		falcon_read(efx, &temp, SPARE_REG_KER);
-		EFX_SET_OWORD_FIELD(temp, MEM_PERR_EN_TX_DATA, 0);
-		falcon_write(efx, &temp, SPARE_REG_KER);
+		efx_reado(efx, &temp, FR_AZ_CSR_SPARE);
+		EFX_SET_OWORD_FIELD(temp, FRF_AB_MEM_PERR_EN_TX_DATA, 0);
+		efx_writeo(efx, &temp, FR_AZ_CSR_SPARE);
 	}
 
-	/* Enable all the genuinely fatal interrupts.  (They are still
-	 * masked by the overall interrupt mask, controlled by
-	 * falcon_interrupts()).
-	 *
-	 * Note: All other fatal interrupts are enabled
-	 */
-	EFX_POPULATE_OWORD_3(temp,
-			     ILL_ADR_INT_KER_EN, 1,
-			     RBUF_OWN_INT_KER_EN, 1,
-			     TBUF_OWN_INT_KER_EN, 1);
-	EFX_INVERT_OWORD(temp);
-	falcon_write(efx, &temp, FATAL_INTR_REG_KER);
-
 	if (EFX_WORKAROUND_7244(efx)) {
-		falcon_read(efx, &temp, RX_FILTER_CTL_REG);
-		EFX_SET_OWORD_FIELD(temp, UDP_FULL_SRCH_LIMIT, 8);
-		EFX_SET_OWORD_FIELD(temp, UDP_WILD_SRCH_LIMIT, 8);
-		EFX_SET_OWORD_FIELD(temp, TCP_FULL_SRCH_LIMIT, 8);
-		EFX_SET_OWORD_FIELD(temp, TCP_WILD_SRCH_LIMIT, 8);
-		falcon_write(efx, &temp, RX_FILTER_CTL_REG);
+		efx_reado(efx, &temp, FR_BZ_RX_FILTER_CTL);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_FULL_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_WILD_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_FULL_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_WILD_SRCH_LIMIT, 8);
+		efx_writeo(efx, &temp, FR_BZ_RX_FILTER_CTL);
 	}
 
-	falcon_setup_rss_indir_table(efx);
-
+	/* XXX This is documented only for Falcon A0/A1 */
 	/* Setup RX.  Wait for descriptor is broken and must
 	 * be disabled.  RXDP recovery shouldn't be needed, but is.
 	 */
-	falcon_read(efx, &temp, RX_SELF_RST_REG_KER);
-	EFX_SET_OWORD_FIELD(temp, RX_NODESC_WAIT_DIS, 1);
-	EFX_SET_OWORD_FIELD(temp, RX_RECOVERY_EN, 1);
+	efx_reado(efx, &temp, FR_AA_RX_SELF_RST);
+	EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_NODESC_WAIT_DIS, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_SELF_RST_EN, 1);
 	if (EFX_WORKAROUND_5583(efx))
-		EFX_SET_OWORD_FIELD(temp, RX_ISCSI_DIS, 1);
-	falcon_write(efx, &temp, RX_SELF_RST_REG_KER);
-
-	/* Disable the ugly timer-based TX DMA backoff and allow TX DMA to be
-	 * controlled by the RX FIFO fill level. Set arbitration to one pkt/Q.
-	 */
-	falcon_read(efx, &temp, TX_CFG2_REG_KER);
-	EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER, 0xfe);
-	EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER_EN, 1);
-	EFX_SET_OWORD_FIELD(temp, TX_ONE_PKT_PER_Q, 1);
-	EFX_SET_OWORD_FIELD(temp, TX_CSR_PUSH_EN, 0);
-	EFX_SET_OWORD_FIELD(temp, TX_DIS_NON_IP_EV, 1);
-	/* Enable SW_EV to inherit in char driver - assume harmless here */
-	EFX_SET_OWORD_FIELD(temp, TX_SW_EV_EN, 1);
-	/* Prefetch threshold 2 => fetch when descriptor cache half empty */
-	EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
-	/* Squash TX of packets of 16 bytes or less */
-	if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
-		EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
-	falcon_write(efx, &temp, TX_CFG2_REG_KER);
+		EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_ISCSI_DIS, 1);
+	efx_writeo(efx, &temp, FR_AA_RX_SELF_RST);
 
 	/* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16
 	 * descriptors (which is bad).
 	 */
-	falcon_read(efx, &temp, TX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD(temp, TX_NO_EOP_DISC_EN, 0);
-	falcon_write(efx, &temp, TX_CFG_REG_KER);
+	efx_reado(efx, &temp, FR_AZ_TX_CFG);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0);
+	efx_writeo(efx, &temp, FR_AZ_TX_CFG);
 
-	/* RX config */
-	falcon_read(efx, &temp, RX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_DESC_PUSH_EN, 0);
-	if (EFX_WORKAROUND_7575(efx))
-		EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
-					(3 * 4096) / 32);
-	if (falcon_rev(efx) >= FALCON_REV_B0)
-		EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
-
-	/* RX FIFO flow control thresholds */
-	thresh = ((rx_xon_thresh_bytes >= 0) ?
-		  rx_xon_thresh_bytes : efx->type->rx_xon_thresh);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_MAC_TH, thresh / 256);
-	thresh = ((rx_xoff_thresh_bytes >= 0) ?
-		  rx_xoff_thresh_bytes : efx->type->rx_xoff_thresh);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_MAC_TH, thresh / 256);
-	/* RX control FIFO thresholds [32 entries] */
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_TX_TH, 20);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_TX_TH, 25);
-	falcon_write(efx, &temp, RX_CFG_REG_KER);
+	falcon_init_rx_cfg(efx);
 
 	/* Set destination of both TX and RX Flush events */
-	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
-		falcon_write(efx, &temp, DP_CTRL_REG);
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) {
+		EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0);
+		efx_writeo(efx, &temp, FR_BZ_DP_CTRL);
 	}
 
+	efx_nic_init_common(efx);
+
 	return 0;
 }
 
-void falcon_remove_nic(struct efx_nic *efx)
+static void falcon_remove_nic(struct efx_nic *efx)
 {
 	struct falcon_nic_data *nic_data = efx->nic_data;
+	struct falcon_board *board = falcon_board(efx);
 	int rc;
 
+	board->type->fini(efx);
+
 	/* Remove I2C adapter and clear it in preparation for a retry */
-	rc = i2c_del_adapter(&efx->i2c_adap);
+	rc = i2c_del_adapter(&board->i2c_adap);
 	BUG_ON(rc);
-	memset(&efx->i2c_adap, 0, sizeof(efx->i2c_adap));
+	memset(&board->i2c_adap, 0, sizeof(board->i2c_adap));
 
 	falcon_remove_spi_devices(efx);
-	falcon_free_buffer(efx, &efx->irq_status);
+	efx_nic_free_buffer(efx, &efx->irq_status);
 
 	falcon_reset_hw(efx, RESET_TYPE_ALL);
 
@@ -3085,12 +1643,86 @@
 	efx->nic_data = NULL;
 }
 
-void falcon_update_nic_stats(struct efx_nic *efx)
+static void falcon_update_nic_stats(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t cnt;
 
-	falcon_read(efx, &cnt, RX_NODESC_DROP_REG_KER);
-	efx->n_rx_nodesc_drop_cnt += EFX_OWORD_FIELD(cnt, RX_NODESC_DROP_CNT);
+	if (nic_data->stats_disable_count)
+		return;
+
+	efx_reado(efx, &cnt, FR_AZ_RX_NODESC_DROP);
+	efx->n_rx_nodesc_drop_cnt +=
+		EFX_OWORD_FIELD(cnt, FRF_AB_RX_NODESC_DROP_CNT);
+
+	if (nic_data->stats_pending &&
+	    *nic_data->stats_dma_done == FALCON_STATS_DONE) {
+		nic_data->stats_pending = false;
+		rmb(); /* read the done flag before the stats */
+		efx->mac_op->update_stats(efx);
+	}
+}
+
+void falcon_start_nic_stats(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
+	spin_lock_bh(&efx->stats_lock);
+	if (--nic_data->stats_disable_count == 0)
+		falcon_stats_request(efx);
+	spin_unlock_bh(&efx->stats_lock);
+}
+
+void falcon_stop_nic_stats(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	int i;
+
+	might_sleep();
+
+	spin_lock_bh(&efx->stats_lock);
+	++nic_data->stats_disable_count;
+	spin_unlock_bh(&efx->stats_lock);
+
+	del_timer_sync(&nic_data->stats_timer);
+
+	/* Wait enough time for the most recent transfer to
+	 * complete. */
+	for (i = 0; i < 4 && nic_data->stats_pending; i++) {
+		if (*nic_data->stats_dma_done == FALCON_STATS_DONE)
+			break;
+		msleep(1);
+	}
+
+	spin_lock_bh(&efx->stats_lock);
+	falcon_stats_complete(efx);
+	spin_unlock_bh(&efx->stats_lock);
+}
+
+static void falcon_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
+{
+	falcon_board(efx)->type->set_id_led(efx, mode);
+}
+
+/**************************************************************************
+ *
+ * Wake on LAN
+ *
+ **************************************************************************
+ */
+
+static void falcon_get_wol(struct efx_nic *efx, struct ethtool_wolinfo *wol)
+{
+	wol->supported = 0;
+	wol->wolopts = 0;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+static int falcon_set_wol(struct efx_nic *efx, u32 type)
+{
+	if (type != 0)
+		return -EINVAL;
+	return 0;
 }
 
 /**************************************************************************
@@ -3100,50 +1732,91 @@
  **************************************************************************
  */
 
-struct efx_nic_type falcon_a_nic_type = {
-	.mem_bar = 2,
+struct efx_nic_type falcon_a1_nic_type = {
+	.probe = falcon_probe_nic,
+	.remove = falcon_remove_nic,
+	.init = falcon_init_nic,
+	.fini = efx_port_dummy_op_void,
+	.monitor = falcon_monitor,
+	.reset = falcon_reset_hw,
+	.probe_port = falcon_probe_port,
+	.remove_port = falcon_remove_port,
+	.prepare_flush = falcon_prepare_flush,
+	.update_stats = falcon_update_nic_stats,
+	.start_stats = falcon_start_nic_stats,
+	.stop_stats = falcon_stop_nic_stats,
+	.set_id_led = falcon_set_id_led,
+	.push_irq_moderation = falcon_push_irq_moderation,
+	.push_multicast_hash = falcon_push_multicast_hash,
+	.reconfigure_port = falcon_reconfigure_port,
+	.get_wol = falcon_get_wol,
+	.set_wol = falcon_set_wol,
+	.resume_wol = efx_port_dummy_op_void,
+	.test_nvram = falcon_test_nvram,
+	.default_mac_ops = &falcon_xmac_operations,
+
+	.revision = EFX_REV_FALCON_A1,
 	.mem_map_size = 0x20000,
-	.txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_A1,
-	.rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_A1,
-	.buf_tbl_base = BUF_TBL_KER_A1,
-	.evq_ptr_tbl_base = EVQ_PTR_TBL_KER_A1,
-	.evq_rptr_tbl_base = EVQ_RPTR_REG_KER_A1,
-	.txd_ring_mask = FALCON_TXD_RING_MASK,
-	.rxd_ring_mask = FALCON_RXD_RING_MASK,
-	.evq_size = FALCON_EVQ_SIZE,
-	.max_dma_mask = FALCON_DMA_MASK,
-	.tx_dma_mask = FALCON_TX_DMA_MASK,
-	.bug5391_mask = 0xf,
-	.rx_xoff_thresh = 2048,
-	.rx_xon_thresh = 512,
+	.txd_ptr_tbl_base = FR_AA_TX_DESC_PTR_TBL_KER,
+	.rxd_ptr_tbl_base = FR_AA_RX_DESC_PTR_TBL_KER,
+	.buf_tbl_base = FR_AA_BUF_FULL_TBL_KER,
+	.evq_ptr_tbl_base = FR_AA_EVQ_PTR_TBL_KER,
+	.evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER,
+	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
 	.rx_buffer_padding = 0x24,
 	.max_interrupt_mode = EFX_INT_MODE_MSI,
 	.phys_addr_channels = 4,
+	.tx_dc_base = 0x130000,
+	.rx_dc_base = 0x100000,
+	.offload_features = NETIF_F_IP_CSUM,
+	.reset_world_flags = ETH_RESET_IRQ,
 };
 
-struct efx_nic_type falcon_b_nic_type = {
-	.mem_bar = 2,
+struct efx_nic_type falcon_b0_nic_type = {
+	.probe = falcon_probe_nic,
+	.remove = falcon_remove_nic,
+	.init = falcon_init_nic,
+	.fini = efx_port_dummy_op_void,
+	.monitor = falcon_monitor,
+	.reset = falcon_reset_hw,
+	.probe_port = falcon_probe_port,
+	.remove_port = falcon_remove_port,
+	.prepare_flush = falcon_prepare_flush,
+	.update_stats = falcon_update_nic_stats,
+	.start_stats = falcon_start_nic_stats,
+	.stop_stats = falcon_stop_nic_stats,
+	.set_id_led = falcon_set_id_led,
+	.push_irq_moderation = falcon_push_irq_moderation,
+	.push_multicast_hash = falcon_push_multicast_hash,
+	.reconfigure_port = falcon_reconfigure_port,
+	.get_wol = falcon_get_wol,
+	.set_wol = falcon_set_wol,
+	.resume_wol = efx_port_dummy_op_void,
+	.test_registers = falcon_b0_test_registers,
+	.test_nvram = falcon_test_nvram,
+	.default_mac_ops = &falcon_xmac_operations,
+
+	.revision = EFX_REV_FALCON_B0,
 	/* Map everything up to and including the RSS indirection
 	 * table.  Don't map MSI-X table, MSI-X PBA since Linux
 	 * requires that they not be mapped.  */
-	.mem_map_size = RX_RSS_INDIR_TBL_B0 + 0x800,
-	.txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_B0,
-	.rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_B0,
-	.buf_tbl_base = BUF_TBL_KER_B0,
-	.evq_ptr_tbl_base = EVQ_PTR_TBL_KER_B0,
-	.evq_rptr_tbl_base = EVQ_RPTR_REG_KER_B0,
-	.txd_ring_mask = FALCON_TXD_RING_MASK,
-	.rxd_ring_mask = FALCON_RXD_RING_MASK,
-	.evq_size = FALCON_EVQ_SIZE,
-	.max_dma_mask = FALCON_DMA_MASK,
-	.tx_dma_mask = FALCON_TX_DMA_MASK,
-	.bug5391_mask = 0,
-	.rx_xoff_thresh = 54272, /* ~80Kb - 3*max MTU */
-	.rx_xon_thresh = 27648,  /* ~3*max MTU */
+	.mem_map_size = (FR_BZ_RX_INDIRECTION_TBL +
+			 FR_BZ_RX_INDIRECTION_TBL_STEP *
+			 FR_BZ_RX_INDIRECTION_TBL_ROWS),
+	.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
+	.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
+	.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
+	.evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL,
+	.evq_rptr_tbl_base = FR_BZ_EVQ_RPTR,
+	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
 	.rx_buffer_padding = 0,
 	.max_interrupt_mode = EFX_INT_MODE_MSIX,
 	.phys_addr_channels = 32, /* Hardware limit is 64, but the legacy
 				   * interrupt handler only supports 32
 				   * channels */
+	.tx_dc_base = 0x130000,
+	.rx_dc_base = 0x100000,
+	.offload_features = NETIF_F_IP_CSUM,
+	.reset_world_flags = ETH_RESET_IRQ,
 };
 
diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h
deleted file mode 100644
index 77f2e0d..0000000
--- a/drivers/net/sfc/falcon.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_FALCON_H
-#define EFX_FALCON_H
-
-#include "net_driver.h"
-#include "efx.h"
-
-/*
- * Falcon hardware control
- */
-
-enum falcon_revision {
-	FALCON_REV_A0 = 0,
-	FALCON_REV_A1 = 1,
-	FALCON_REV_B0 = 2,
-};
-
-static inline int falcon_rev(struct efx_nic *efx)
-{
-	return efx->pci_dev->revision;
-}
-
-extern struct efx_nic_type falcon_a_nic_type;
-extern struct efx_nic_type falcon_b_nic_type;
-
-/**************************************************************************
- *
- * Externs
- *
- **************************************************************************
- */
-
-/* TX data path */
-extern int falcon_probe_tx(struct efx_tx_queue *tx_queue);
-extern void falcon_init_tx(struct efx_tx_queue *tx_queue);
-extern void falcon_fini_tx(struct efx_tx_queue *tx_queue);
-extern void falcon_remove_tx(struct efx_tx_queue *tx_queue);
-extern void falcon_push_buffers(struct efx_tx_queue *tx_queue);
-
-/* RX data path */
-extern int falcon_probe_rx(struct efx_rx_queue *rx_queue);
-extern void falcon_init_rx(struct efx_rx_queue *rx_queue);
-extern void falcon_fini_rx(struct efx_rx_queue *rx_queue);
-extern void falcon_remove_rx(struct efx_rx_queue *rx_queue);
-extern void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue);
-
-/* Event data path */
-extern int falcon_probe_eventq(struct efx_channel *channel);
-extern void falcon_init_eventq(struct efx_channel *channel);
-extern void falcon_fini_eventq(struct efx_channel *channel);
-extern void falcon_remove_eventq(struct efx_channel *channel);
-extern int falcon_process_eventq(struct efx_channel *channel, int rx_quota);
-extern void falcon_eventq_read_ack(struct efx_channel *channel);
-
-/* Ports */
-extern int falcon_probe_port(struct efx_nic *efx);
-extern void falcon_remove_port(struct efx_nic *efx);
-
-/* MAC/PHY */
-extern int falcon_switch_mac(struct efx_nic *efx);
-extern bool falcon_xaui_link_ok(struct efx_nic *efx);
-extern int falcon_dma_stats(struct efx_nic *efx,
-			    unsigned int done_offset);
-extern void falcon_drain_tx_fifo(struct efx_nic *efx);
-extern void falcon_deconfigure_mac_wrapper(struct efx_nic *efx);
-extern void falcon_reconfigure_mac_wrapper(struct efx_nic *efx);
-
-/* Interrupts and test events */
-extern int falcon_init_interrupt(struct efx_nic *efx);
-extern void falcon_enable_interrupts(struct efx_nic *efx);
-extern void falcon_generate_test_event(struct efx_channel *channel,
-				       unsigned int magic);
-extern void falcon_sim_phy_event(struct efx_nic *efx);
-extern void falcon_generate_interrupt(struct efx_nic *efx);
-extern void falcon_set_int_moderation(struct efx_channel *channel);
-extern void falcon_disable_interrupts(struct efx_nic *efx);
-extern void falcon_fini_interrupt(struct efx_nic *efx);
-
-#define FALCON_IRQ_MOD_RESOLUTION 5
-
-/* Global Resources */
-extern int falcon_probe_nic(struct efx_nic *efx);
-extern int falcon_probe_resources(struct efx_nic *efx);
-extern int falcon_init_nic(struct efx_nic *efx);
-extern int falcon_flush_queues(struct efx_nic *efx);
-extern int falcon_reset_hw(struct efx_nic *efx, enum reset_type method);
-extern void falcon_remove_resources(struct efx_nic *efx);
-extern void falcon_remove_nic(struct efx_nic *efx);
-extern void falcon_update_nic_stats(struct efx_nic *efx);
-extern void falcon_set_multicast_hash(struct efx_nic *efx);
-extern int falcon_reset_xaui(struct efx_nic *efx);
-
-/* Tests */
-struct falcon_nvconfig;
-extern int falcon_read_nvram(struct efx_nic *efx,
-			     struct falcon_nvconfig *nvconfig);
-extern int falcon_test_registers(struct efx_nic *efx);
-
-/**************************************************************************
- *
- * Falcon MAC stats
- *
- **************************************************************************
- */
-
-#define FALCON_STAT_OFFSET(falcon_stat) EFX_VAL(falcon_stat, offset)
-#define FALCON_STAT_WIDTH(falcon_stat) EFX_VAL(falcon_stat, WIDTH)
-
-/* Retrieve statistic from statistics block */
-#define FALCON_STAT(efx, falcon_stat, efx_stat) do {		\
-	if (FALCON_STAT_WIDTH(falcon_stat) == 16)		\
-		(efx)->mac_stats.efx_stat += le16_to_cpu(	\
-			*((__force __le16 *)				\
-			  (efx->stats_buffer.addr +		\
-			   FALCON_STAT_OFFSET(falcon_stat))));	\
-	else if (FALCON_STAT_WIDTH(falcon_stat) == 32)		\
-		(efx)->mac_stats.efx_stat += le32_to_cpu(	\
-			*((__force __le32 *)				\
-			  (efx->stats_buffer.addr +		\
-			   FALCON_STAT_OFFSET(falcon_stat))));	\
-	else							\
-		(efx)->mac_stats.efx_stat += le64_to_cpu(	\
-			*((__force __le64 *)				\
-			  (efx->stats_buffer.addr +		\
-			   FALCON_STAT_OFFSET(falcon_stat))));	\
-	} while (0)
-
-#define FALCON_MAC_STATS_SIZE 0x100
-
-#define MAC_DATA_LBN 0
-#define MAC_DATA_WIDTH 32
-
-extern void falcon_generate_event(struct efx_channel *channel,
-				  efx_qword_t *event);
-
-#endif /* EFX_FALCON_H */
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
new file mode 100644
index 0000000..bf0b96a
--- /dev/null
+++ b/drivers/net/sfc/falcon_boards.c
@@ -0,0 +1,752 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/rtnetlink.h>
+
+#include "net_driver.h"
+#include "phy.h"
+#include "efx.h"
+#include "nic.h"
+#include "regs.h"
+#include "io.h"
+#include "workarounds.h"
+
+/* Macros for unpacking the board revision */
+/* The revision info is in host byte order. */
+#define FALCON_BOARD_TYPE(_rev) (_rev >> 8)
+#define FALCON_BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
+#define FALCON_BOARD_MINOR(_rev) (_rev & 0xf)
+
+/* Board types */
+#define FALCON_BOARD_SFE4001 0x01
+#define FALCON_BOARD_SFE4002 0x02
+#define FALCON_BOARD_SFN4111T 0x51
+#define FALCON_BOARD_SFN4112F 0x52
+
+/*****************************************************************************
+ * Support for LM87 sensor chip used on several boards
+ */
+#define LM87_REG_ALARMS1		0x41
+#define LM87_REG_ALARMS2		0x42
+#define LM87_IN_LIMITS(nr, _min, _max)			\
+	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
+#define LM87_AIN_LIMITS(nr, _min, _max)			\
+	0x3B + (nr), _max, 0x1A + (nr), _min
+#define LM87_TEMP_INT_LIMITS(_min, _max)		\
+	0x39, _max, 0x3A, _min
+#define LM87_TEMP_EXT1_LIMITS(_min, _max)		\
+	0x37, _max, 0x38, _min
+
+#define LM87_ALARM_TEMP_INT		0x10
+#define LM87_ALARM_TEMP_EXT1		0x20
+
+#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
+
+static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+			 const u8 *reg_values)
+{
+	struct falcon_board *board = falcon_board(efx);
+	struct i2c_client *client = i2c_new_device(&board->i2c_adap, info);
+	int rc;
+
+	if (!client)
+		return -EIO;
+
+	while (*reg_values) {
+		u8 reg = *reg_values++;
+		u8 value = *reg_values++;
+		rc = i2c_smbus_write_byte_data(client, reg, value);
+		if (rc)
+			goto err;
+	}
+
+	board->hwmon_client = client;
+	return 0;
+
+err:
+	i2c_unregister_device(client);
+	return rc;
+}
+
+static void efx_fini_lm87(struct efx_nic *efx)
+{
+	i2c_unregister_device(falcon_board(efx)->hwmon_client);
+}
+
+static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+	struct i2c_client *client = falcon_board(efx)->hwmon_client;
+	s32 alarms1, alarms2;
+
+	/* If link is up then do not monitor temperature */
+	if (EFX_WORKAROUND_7884(efx) && efx->link_state.up)
+		return 0;
+
+	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
+	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
+	if (alarms1 < 0)
+		return alarms1;
+	if (alarms2 < 0)
+		return alarms2;
+	alarms1 &= mask;
+	alarms2 &= mask >> 8;
+	if (alarms1 || alarms2) {
+		EFX_ERR(efx,
+			"LM87 detected a hardware failure (status %02x:%02x)"
+			"%s%s\n",
+			alarms1, alarms2,
+			(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
+			(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+#else /* !CONFIG_SENSORS_LM87 */
+
+static inline int
+efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+	      const u8 *reg_values)
+{
+	return 0;
+}
+static inline void efx_fini_lm87(struct efx_nic *efx)
+{
+}
+static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SENSORS_LM87 */
+
+/*****************************************************************************
+ * Support for the SFE4001 and SFN4111T NICs.
+ *
+ * The SFE4001 does not power-up fully at reset due to its high power
+ * consumption.  We control its power via a PCA9539 I/O expander.
+ * Both boards have a MAX6647 temperature monitor which we expose to
+ * the lm90 driver.
+ *
+ * This also provides minimal support for reflashing the PHY, which is
+ * initiated by resetting it with the FLASH_CFG_1 pin pulled down.
+ * On SFE4001 rev A2 and later this is connected to the 3V3X output of
+ * the IO-expander; on the SFN4111T it is connected to Falcon's GPIO3.
+ * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually
+ * exclusive with the network device being open.
+ */
+
+/**************************************************************************
+ * Support for I2C IO Expander device on SFE4001
+ */
+#define	PCA9539 0x74
+
+#define	P0_IN 0x00
+#define	P0_OUT 0x02
+#define	P0_INVERT 0x04
+#define	P0_CONFIG 0x06
+
+#define	P0_EN_1V0X_LBN 0
+#define	P0_EN_1V0X_WIDTH 1
+#define	P0_EN_1V2_LBN 1
+#define	P0_EN_1V2_WIDTH 1
+#define	P0_EN_2V5_LBN 2
+#define	P0_EN_2V5_WIDTH 1
+#define	P0_EN_3V3X_LBN 3
+#define	P0_EN_3V3X_WIDTH 1
+#define	P0_EN_5V_LBN 4
+#define	P0_EN_5V_WIDTH 1
+#define	P0_SHORTEN_JTAG_LBN 5
+#define	P0_SHORTEN_JTAG_WIDTH 1
+#define	P0_X_TRST_LBN 6
+#define	P0_X_TRST_WIDTH 1
+#define	P0_DSP_RESET_LBN 7
+#define	P0_DSP_RESET_WIDTH 1
+
+#define	P1_IN 0x01
+#define	P1_OUT 0x03
+#define	P1_INVERT 0x05
+#define	P1_CONFIG 0x07
+
+#define	P1_AFE_PWD_LBN 0
+#define	P1_AFE_PWD_WIDTH 1
+#define	P1_DSP_PWD25_LBN 1
+#define	P1_DSP_PWD25_WIDTH 1
+#define	P1_RESERVED_LBN 2
+#define	P1_RESERVED_WIDTH 2
+#define	P1_SPARE_LBN 4
+#define	P1_SPARE_WIDTH 4
+
+/* Temperature Sensor */
+#define MAX664X_REG_RSL		0x02
+#define MAX664X_REG_WLHO	0x0B
+
+static void sfe4001_poweroff(struct efx_nic *efx)
+{
+	struct i2c_client *ioexp_client = falcon_board(efx)->ioexp_client;
+	struct i2c_client *hwmon_client = falcon_board(efx)->hwmon_client;
+
+	/* Turn off all power rails and disable outputs */
+	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
+	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
+	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);
+
+	/* Clear any over-temperature alert */
+	i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
+}
+
+static int sfe4001_poweron(struct efx_nic *efx)
+{
+	struct i2c_client *ioexp_client = falcon_board(efx)->ioexp_client;
+	struct i2c_client *hwmon_client = falcon_board(efx)->hwmon_client;
+	unsigned int i, j;
+	int rc;
+	u8 out;
+
+	/* Clear any previous over-temperature alert */
+	rc = i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
+	if (rc < 0)
+		return rc;
+
+	/* Enable port 0 and port 1 outputs on IO expander */
+	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
+	if (rc)
+		return rc;
+	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
+				       0xff & ~(1 << P1_SPARE_LBN));
+	if (rc)
+		goto fail_on;
+
+	/* If PHY power is on, turn it all off and wait 1 second to
+	 * ensure a full reset.
+	 */
+	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
+	if (rc < 0)
+		goto fail_on;
+	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
+		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
+		       (0 << P0_EN_1V0X_LBN));
+	if (rc != out) {
+		EFX_INFO(efx, "power-cycling PHY\n");
+		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
+		if (rc)
+			goto fail_on;
+		schedule_timeout_uninterruptible(HZ);
+	}
+
+	for (i = 0; i < 20; ++i) {
+		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
+		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
+			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
+			       (1 << P0_X_TRST_LBN));
+		if (efx->phy_mode & PHY_MODE_SPECIAL)
+			out |= 1 << P0_EN_3V3X_LBN;
+
+		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
+		if (rc)
+			goto fail_on;
+		msleep(10);
+
+		/* Turn on 1V power rail */
+		out &= ~(1 << P0_EN_1V0X_LBN);
+		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
+		if (rc)
+			goto fail_on;
+
+		EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);
+
+		/* In flash config mode, DSP does not turn on AFE, so
+		 * just wait 1 second.
+		 */
+		if (efx->phy_mode & PHY_MODE_SPECIAL) {
+			schedule_timeout_uninterruptible(HZ);
+			return 0;
+		}
+
+		for (j = 0; j < 10; ++j) {
+			msleep(100);
+
+			/* Check DSP has asserted AFE power line */
+			rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
+			if (rc < 0)
+				goto fail_on;
+			if (rc & (1 << P1_AFE_PWD_LBN))
+				return 0;
+		}
+	}
+
+	EFX_INFO(efx, "timed out waiting for DSP boot\n");
+	rc = -ETIMEDOUT;
+fail_on:
+	sfe4001_poweroff(efx);
+	return rc;
+}
+
+static int sfn4111t_reset(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+	efx_oword_t reg;
+
+	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
+	i2c_lock_adapter(&board->i2c_adap);
+
+	/* Pull RST_N (GPIO 2) low then let it up again, setting the
+	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
+	 * output enables; the output levels should always be 0 (low)
+	 * and we rely on external pull-ups. */
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO2_OEN, true);
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
+	msleep(1000);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO2_OEN, false);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN,
+			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
+	msleep(1);
+
+	i2c_unlock_adapter(&board->i2c_adap);
+
+	ssleep(1);
+	return 0;
+}
+
+static ssize_t show_phy_flash_cfg(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
+}
+
+static ssize_t set_phy_flash_cfg(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+	enum efx_phy_mode old_mode, new_mode;
+	int err;
+
+	rtnl_lock();
+	old_mode = efx->phy_mode;
+	if (count == 0 || *buf == '0')
+		new_mode = old_mode & ~PHY_MODE_SPECIAL;
+	else
+		new_mode = PHY_MODE_SPECIAL;
+	if (old_mode == new_mode) {
+		err = 0;
+	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
+		err = -EBUSY;
+	} else {
+		/* Reset the PHY, reconfigure the MAC and enable/disable
+		 * MAC stats accordingly. */
+		efx->phy_mode = new_mode;
+		if (new_mode & PHY_MODE_SPECIAL)
+			falcon_stop_nic_stats(efx);
+		if (falcon_board(efx)->type->id == FALCON_BOARD_SFE4001)
+			err = sfe4001_poweron(efx);
+		else
+			err = sfn4111t_reset(efx);
+		if (!err)
+			err = efx_reconfigure_port(efx);
+		if (!(new_mode & PHY_MODE_SPECIAL))
+			falcon_start_nic_stats(efx);
+	}
+	rtnl_unlock();
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
+
+static void sfe4001_fini(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+
+	EFX_INFO(efx, "%s\n", __func__);
+
+	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	sfe4001_poweroff(efx);
+	i2c_unregister_device(board->ioexp_client);
+	i2c_unregister_device(board->hwmon_client);
+}
+
+static int sfe4001_check_hw(struct efx_nic *efx)
+{
+	s32 status;
+
+	/* If XAUI link is up then do not monitor */
+	if (EFX_WORKAROUND_7884(efx) && !efx->xmac_poll_required)
+		return 0;
+
+	/* Check the powered status of the PHY. Lack of power implies that
+	 * the MAX6647 has shut down power to it, probably due to a temp.
+	 * alarm. Reading the power status rather than the MAX6647 status
+	 * directly because the later is read-to-clear and would thus
+	 * start to power up the PHY again when polled, causing us to blip
+	 * the power undesirably.
+	 * We know we can read from the IO expander because we did
+	 * it during power-on. Assume failure now is bad news. */
+	status = i2c_smbus_read_byte_data(falcon_board(efx)->ioexp_client, P1_IN);
+	if (status >= 0 &&
+	    (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0)
+		return 0;
+
+	/* Use board power control, not PHY power control */
+	sfe4001_poweroff(efx);
+	efx->phy_mode = PHY_MODE_OFF;
+
+	return (status < 0) ? -EIO : -ERANGE;
+}
+
+static struct i2c_board_info sfe4001_hwmon_info = {
+	I2C_BOARD_INFO("max6647", 0x4e),
+};
+
+/* This board uses an I2C expander to provider power to the PHY, which needs to
+ * be turned on before the PHY can be used.
+ * Context: Process context, rtnl lock held
+ */
+static int sfe4001_init(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+	int rc;
+
+#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE)
+	board->hwmon_client =
+		i2c_new_device(&board->i2c_adap, &sfe4001_hwmon_info);
+#else
+	board->hwmon_client =
+		i2c_new_dummy(&board->i2c_adap, sfe4001_hwmon_info.addr);
+#endif
+	if (!board->hwmon_client)
+		return -EIO;
+
+	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
+	rc = i2c_smbus_write_byte_data(board->hwmon_client,
+				       MAX664X_REG_WLHO, 90);
+	if (rc)
+		goto fail_hwmon;
+
+	board->ioexp_client = i2c_new_dummy(&board->i2c_adap, PCA9539);
+	if (!board->ioexp_client) {
+		rc = -EIO;
+		goto fail_hwmon;
+	}
+
+	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
+		 * will fail. */
+		falcon_stop_nic_stats(efx);
+	}
+	rc = sfe4001_poweron(efx);
+	if (rc)
+		goto fail_ioexp;
+
+	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	if (rc)
+		goto fail_on;
+
+	EFX_INFO(efx, "PHY is powered on\n");
+	return 0;
+
+fail_on:
+	sfe4001_poweroff(efx);
+fail_ioexp:
+	i2c_unregister_device(board->ioexp_client);
+fail_hwmon:
+	i2c_unregister_device(board->hwmon_client);
+	return rc;
+}
+
+static int sfn4111t_check_hw(struct efx_nic *efx)
+{
+	s32 status;
+
+	/* If XAUI link is up then do not monitor */
+	if (EFX_WORKAROUND_7884(efx) && !efx->xmac_poll_required)
+		return 0;
+
+	/* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */
+	status = i2c_smbus_read_byte_data(falcon_board(efx)->hwmon_client,
+					  MAX664X_REG_RSL);
+	if (status < 0)
+		return -EIO;
+	if (status & 0x57)
+		return -ERANGE;
+	return 0;
+}
+
+static void sfn4111t_fini(struct efx_nic *efx)
+{
+	EFX_INFO(efx, "%s\n", __func__);
+
+	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	i2c_unregister_device(falcon_board(efx)->hwmon_client);
+}
+
+static struct i2c_board_info sfn4111t_a0_hwmon_info = {
+	I2C_BOARD_INFO("max6647", 0x4e),
+};
+
+static struct i2c_board_info sfn4111t_r5_hwmon_info = {
+	I2C_BOARD_INFO("max6646", 0x4d),
+};
+
+static void sfn4111t_init_phy(struct efx_nic *efx)
+{
+	if (!(efx->phy_mode & PHY_MODE_SPECIAL)) {
+		if (sft9001_wait_boot(efx) != -EINVAL)
+			return;
+
+		efx->phy_mode = PHY_MODE_SPECIAL;
+		falcon_stop_nic_stats(efx);
+	}
+
+	sfn4111t_reset(efx);
+	sft9001_wait_boot(efx);
+}
+
+static int sfn4111t_init(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+	int rc;
+
+	board->hwmon_client =
+		i2c_new_device(&board->i2c_adap,
+			       (board->minor < 5) ?
+			       &sfn4111t_a0_hwmon_info :
+			       &sfn4111t_r5_hwmon_info);
+	if (!board->hwmon_client)
+		return -EIO;
+
+	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	if (rc)
+		goto fail_hwmon;
+
+	if (efx->phy_mode & PHY_MODE_SPECIAL)
+		/* PHY may not generate a 156.25 MHz clock and MAC
+		 * stats fetch will fail. */
+		falcon_stop_nic_stats(efx);
+
+	return 0;
+
+fail_hwmon:
+	i2c_unregister_device(board->hwmon_client);
+	return rc;
+}
+
+/*****************************************************************************
+ * Support for the SFE4002
+ *
+ */
+static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfe4002_lm87_regs[] = {
+	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
+	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
+	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
+	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
+	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
+	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
+	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
+	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
+	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
+	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	0
+};
+
+static struct i2c_board_info sfe4002_hwmon_info = {
+	I2C_BOARD_INFO("lm87", 0x2e),
+	.platform_data	= &sfe4002_lm87_channel,
+};
+
+/****************************************************************************/
+/* LED allocations. Note that on rev A0 boards the schematic and the reality
+ * differ: red and green are swapped. Below is the fixed (A1) layout (there
+ * are only 3 A0 boards in existence, so no real reason to make this
+ * conditional).
+ */
+#define SFE4002_FAULT_LED (2)	/* Red */
+#define SFE4002_RX_LED    (0)	/* Green */
+#define SFE4002_TX_LED    (1)	/* Amber */
+
+static void sfe4002_init_phy(struct efx_nic *efx)
+{
+	/* Set the TX and RX LEDs to reflect status and activity, and the
+	 * fault LED off */
+	falcon_qt202x_set_led(efx, SFE4002_TX_LED,
+			      QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
+	falcon_qt202x_set_led(efx, SFE4002_RX_LED,
+			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
+	falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
+}
+
+static void sfe4002_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
+{
+	falcon_qt202x_set_led(
+		efx, SFE4002_FAULT_LED,
+		(mode == EFX_LED_ON) ? QUAKE_LED_ON : QUAKE_LED_OFF);
+}
+
+static int sfe4002_check_hw(struct efx_nic *efx)
+{
+	struct falcon_board *board = falcon_board(efx);
+
+	/* A0 board rev. 4002s report a temperature fault the whole time
+	 * (bad sensor) so we mask it out. */
+	unsigned alarm_mask =
+		(board->major == 0 && board->minor == 0) ?
+		~LM87_ALARM_TEMP_EXT1 : ~0;
+
+	return efx_check_lm87(efx, alarm_mask);
+}
+
+static int sfe4002_init(struct efx_nic *efx)
+{
+	return efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
+}
+
+/*****************************************************************************
+ * Support for the SFN4112F
+ *
+ */
+static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfn4112f_lm87_regs[] = {
+	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
+	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
+	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
+	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
+	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
+	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
+	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
+	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	0
+};
+
+static struct i2c_board_info sfn4112f_hwmon_info = {
+	I2C_BOARD_INFO("lm87", 0x2e),
+	.platform_data	= &sfn4112f_lm87_channel,
+};
+
+#define SFN4112F_ACT_LED	0
+#define SFN4112F_LINK_LED	1
+
+static void sfn4112f_init_phy(struct efx_nic *efx)
+{
+	falcon_qt202x_set_led(efx, SFN4112F_ACT_LED,
+			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
+	falcon_qt202x_set_led(efx, SFN4112F_LINK_LED,
+			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
+}
+
+static void sfn4112f_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
+{
+	int reg;
+
+	switch (mode) {
+	case EFX_LED_OFF:
+		reg = QUAKE_LED_OFF;
+		break;
+	case EFX_LED_ON:
+		reg = QUAKE_LED_ON;
+		break;
+	default:
+		reg = QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT;
+		break;
+	}
+
+	falcon_qt202x_set_led(efx, SFN4112F_LINK_LED, reg);
+}
+
+static int sfn4112f_check_hw(struct efx_nic *efx)
+{
+	/* Mask out unused sensors */
+	return efx_check_lm87(efx, ~0x48);
+}
+
+static int sfn4112f_init(struct efx_nic *efx)
+{
+	return efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
+}
+
+static const struct falcon_board_type board_types[] = {
+	{
+		.id		= FALCON_BOARD_SFE4001,
+		.ref_model	= "SFE4001",
+		.gen_type	= "10GBASE-T adapter",
+		.init		= sfe4001_init,
+		.init_phy	= efx_port_dummy_op_void,
+		.fini		= sfe4001_fini,
+		.set_id_led	= tenxpress_set_id_led,
+		.monitor	= sfe4001_check_hw,
+	},
+	{
+		.id		= FALCON_BOARD_SFE4002,
+		.ref_model	= "SFE4002",
+		.gen_type	= "XFP adapter",
+		.init		= sfe4002_init,
+		.init_phy	= sfe4002_init_phy,
+		.fini		= efx_fini_lm87,
+		.set_id_led	= sfe4002_set_id_led,
+		.monitor	= sfe4002_check_hw,
+	},
+	{
+		.id		= FALCON_BOARD_SFN4111T,
+		.ref_model	= "SFN4111T",
+		.gen_type	= "100/1000/10GBASE-T adapter",
+		.init		= sfn4111t_init,
+		.init_phy	= sfn4111t_init_phy,
+		.fini		= sfn4111t_fini,
+		.set_id_led	= tenxpress_set_id_led,
+		.monitor	= sfn4111t_check_hw,
+	},
+	{
+		.id		= FALCON_BOARD_SFN4112F,
+		.ref_model	= "SFN4112F",
+		.gen_type	= "SFP+ adapter",
+		.init		= sfn4112f_init,
+		.init_phy	= sfn4112f_init_phy,
+		.fini		= efx_fini_lm87,
+		.set_id_led	= sfn4112f_set_id_led,
+		.monitor	= sfn4112f_check_hw,
+	},
+};
+
+static const struct falcon_board_type falcon_dummy_board = {
+	.init		= efx_port_dummy_op_int,
+	.init_phy	= efx_port_dummy_op_void,
+	.fini		= efx_port_dummy_op_void,
+	.set_id_led	= efx_port_dummy_op_set_id_led,
+	.monitor	= efx_port_dummy_op_int,
+};
+
+void falcon_probe_board(struct efx_nic *efx, u16 revision_info)
+{
+	struct falcon_board *board = falcon_board(efx);
+	u8 type_id = FALCON_BOARD_TYPE(revision_info);
+	int i;
+
+	board->major = FALCON_BOARD_MAJOR(revision_info);
+	board->minor = FALCON_BOARD_MINOR(revision_info);
+
+	for (i = 0; i < ARRAY_SIZE(board_types); i++)
+		if (board_types[i].id == type_id)
+			board->type = &board_types[i];
+
+	if (board->type) {
+		EFX_INFO(efx, "board is %s rev %c%d\n",
+			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
+			 ? board->type->ref_model : board->type->gen_type,
+			 'A' + board->major, board->minor);
+	} else {
+		EFX_ERR(efx, "unknown board type %d\n", type_id);
+		board->type = &falcon_dummy_board;
+	}
+}
diff --git a/drivers/net/sfc/falcon_gmac.c b/drivers/net/sfc/falcon_gmac.c
index 8865eae..7dadfcb 100644
--- a/drivers/net/sfc/falcon_gmac.c
+++ b/drivers/net/sfc/falcon_gmac.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -11,11 +11,10 @@
 #include <linux/delay.h>
 #include "net_driver.h"
 #include "efx.h"
-#include "falcon.h"
+#include "nic.h"
 #include "mac.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
-#include "gmii.h"
+#include "regs.h"
+#include "io.h"
 
 /**************************************************************************
  *
@@ -23,106 +22,109 @@
  *
  *************************************************************************/
 
-static void falcon_reconfigure_gmac(struct efx_nic *efx)
+static int falcon_reconfigure_gmac(struct efx_nic *efx)
 {
+	struct efx_link_state *link_state = &efx->link_state;
 	bool loopback, tx_fc, rx_fc, bytemode;
 	int if_mode;
 	unsigned int max_frame_len;
 	efx_oword_t reg;
 
 	/* Configuration register 1 */
-	tx_fc = (efx->link_fc & EFX_FC_TX) || !efx->link_fd;
-	rx_fc = !!(efx->link_fc & EFX_FC_RX);
+	tx_fc = (link_state->fc & EFX_FC_TX) || !link_state->fd;
+	rx_fc = !!(link_state->fc & EFX_FC_RX);
 	loopback = (efx->loopback_mode == LOOPBACK_GMAC);
-	bytemode = (efx->link_speed == 1000);
+	bytemode = (link_state->speed == 1000);
 
 	EFX_POPULATE_OWORD_5(reg,
-			     GM_LOOP, loopback,
-			     GM_TX_EN, 1,
-			     GM_TX_FC_EN, tx_fc,
-			     GM_RX_EN, 1,
-			     GM_RX_FC_EN, rx_fc);
-	falcon_write(efx, &reg, GM_CFG1_REG);
+			     FRF_AB_GM_LOOP, loopback,
+			     FRF_AB_GM_TX_EN, 1,
+			     FRF_AB_GM_TX_FC_EN, tx_fc,
+			     FRF_AB_GM_RX_EN, 1,
+			     FRF_AB_GM_RX_FC_EN, rx_fc);
+	efx_writeo(efx, &reg, FR_AB_GM_CFG1);
 	udelay(10);
 
 	/* Configuration register 2 */
 	if_mode = (bytemode) ? 2 : 1;
 	EFX_POPULATE_OWORD_5(reg,
-			     GM_IF_MODE, if_mode,
-			     GM_PAD_CRC_EN, 1,
-			     GM_LEN_CHK, 1,
-			     GM_FD, efx->link_fd,
-			     GM_PAMBL_LEN, 0x7/*datasheet recommended */);
+			     FRF_AB_GM_IF_MODE, if_mode,
+			     FRF_AB_GM_PAD_CRC_EN, 1,
+			     FRF_AB_GM_LEN_CHK, 1,
+			     FRF_AB_GM_FD, link_state->fd,
+			     FRF_AB_GM_PAMBL_LEN, 0x7/*datasheet recommended */);
 
-	falcon_write(efx, &reg, GM_CFG2_REG);
+	efx_writeo(efx, &reg, FR_AB_GM_CFG2);
 	udelay(10);
 
 	/* Max frame len register */
 	max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu);
-	EFX_POPULATE_OWORD_1(reg, GM_MAX_FLEN, max_frame_len);
-	falcon_write(efx, &reg, GM_MAX_FLEN_REG);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_MAX_FLEN, max_frame_len);
+	efx_writeo(efx, &reg, FR_AB_GM_MAX_FLEN);
 	udelay(10);
 
 	/* FIFO configuration register 0 */
 	EFX_POPULATE_OWORD_5(reg,
-			     GMF_FTFENREQ, 1,
-			     GMF_STFENREQ, 1,
-			     GMF_FRFENREQ, 1,
-			     GMF_SRFENREQ, 1,
-			     GMF_WTMENREQ, 1);
-	falcon_write(efx, &reg, GMF_CFG0_REG);
+			     FRF_AB_GMF_FTFENREQ, 1,
+			     FRF_AB_GMF_STFENREQ, 1,
+			     FRF_AB_GMF_FRFENREQ, 1,
+			     FRF_AB_GMF_SRFENREQ, 1,
+			     FRF_AB_GMF_WTMENREQ, 1);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG0);
 	udelay(10);
 
 	/* FIFO configuration register 1 */
 	EFX_POPULATE_OWORD_2(reg,
-			     GMF_CFGFRTH, 0x12,
-			     GMF_CFGXOFFRTX, 0xffff);
-	falcon_write(efx, &reg, GMF_CFG1_REG);
+			     FRF_AB_GMF_CFGFRTH, 0x12,
+			     FRF_AB_GMF_CFGXOFFRTX, 0xffff);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG1);
 	udelay(10);
 
 	/* FIFO configuration register 2 */
 	EFX_POPULATE_OWORD_2(reg,
-			     GMF_CFGHWM, 0x3f,
-			     GMF_CFGLWM, 0xa);
-	falcon_write(efx, &reg, GMF_CFG2_REG);
+			     FRF_AB_GMF_CFGHWM, 0x3f,
+			     FRF_AB_GMF_CFGLWM, 0xa);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG2);
 	udelay(10);
 
 	/* FIFO configuration register 3 */
 	EFX_POPULATE_OWORD_2(reg,
-			     GMF_CFGHWMFT, 0x1c,
-			     GMF_CFGFTTH, 0x08);
-	falcon_write(efx, &reg, GMF_CFG3_REG);
+			     FRF_AB_GMF_CFGHWMFT, 0x1c,
+			     FRF_AB_GMF_CFGFTTH, 0x08);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG3);
 	udelay(10);
 
 	/* FIFO configuration register 4 */
-	EFX_POPULATE_OWORD_1(reg, GMF_HSTFLTRFRM_PAUSE, 1);
-	falcon_write(efx, &reg, GMF_CFG4_REG);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_GMF_HSTFLTRFRM_PAUSE, 1);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG4);
 	udelay(10);
 
 	/* FIFO configuration register 5 */
-	falcon_read(efx, &reg, GMF_CFG5_REG);
-	EFX_SET_OWORD_FIELD(reg, GMF_CFGBYTMODE, bytemode);
-	EFX_SET_OWORD_FIELD(reg, GMF_CFGHDPLX, !efx->link_fd);
-	EFX_SET_OWORD_FIELD(reg, GMF_HSTDRPLT64, !efx->link_fd);
-	EFX_SET_OWORD_FIELD(reg, GMF_HSTFLTRFRMDC_PAUSE, 0);
-	falcon_write(efx, &reg, GMF_CFG5_REG);
+	efx_reado(efx, &reg, FR_AB_GMF_CFG5);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_CFGBYTMODE, bytemode);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_CFGHDPLX, !link_state->fd);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_HSTDRPLT64, !link_state->fd);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_HSTFLTRFRMDC_PAUSE, 0);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG5);
 	udelay(10);
 
 	/* MAC address */
 	EFX_POPULATE_OWORD_4(reg,
-			     GM_HWADDR_5, efx->net_dev->dev_addr[5],
-			     GM_HWADDR_4, efx->net_dev->dev_addr[4],
-			     GM_HWADDR_3, efx->net_dev->dev_addr[3],
-			     GM_HWADDR_2, efx->net_dev->dev_addr[2]);
-	falcon_write(efx, &reg, GM_ADR1_REG);
+			     FRF_AB_GM_ADR_B0, efx->net_dev->dev_addr[5],
+			     FRF_AB_GM_ADR_B1, efx->net_dev->dev_addr[4],
+			     FRF_AB_GM_ADR_B2, efx->net_dev->dev_addr[3],
+			     FRF_AB_GM_ADR_B3, efx->net_dev->dev_addr[2]);
+	efx_writeo(efx, &reg, FR_AB_GM_ADR1);
 	udelay(10);
 	EFX_POPULATE_OWORD_2(reg,
-			     GM_HWADDR_1, efx->net_dev->dev_addr[1],
-			     GM_HWADDR_0, efx->net_dev->dev_addr[0]);
-	falcon_write(efx, &reg, GM_ADR2_REG);
+			     FRF_AB_GM_ADR_B4, efx->net_dev->dev_addr[1],
+			     FRF_AB_GM_ADR_B5, efx->net_dev->dev_addr[0]);
+	efx_writeo(efx, &reg, FR_AB_GM_ADR2);
 	udelay(10);
 
 	falcon_reconfigure_mac_wrapper(efx);
+
+	return 0;
 }
 
 static void falcon_update_stats_gmac(struct efx_nic *efx)
@@ -130,11 +132,6 @@
 	struct efx_mac_stats *mac_stats = &efx->mac_stats;
 	unsigned long old_rx_pause, old_tx_pause;
 	unsigned long new_rx_pause, new_tx_pause;
-	int rc;
-
-	rc = falcon_dma_stats(efx, GDmaDone_offset);
-	if (rc)
-		return;
 
 	/* Pause frames are erroneously counted as errors (SFC bug 3269) */
 	old_rx_pause = mac_stats->rx_pause;
@@ -221,9 +218,13 @@
 	mac_stats->rx_lt64 = mac_stats->rx_good_lt64 + mac_stats->rx_bad_lt64;
 }
 
+static bool falcon_gmac_check_fault(struct efx_nic *efx)
+{
+	return false;
+}
+
 struct efx_mac_operations falcon_gmac_operations = {
 	.reconfigure	= falcon_reconfigure_gmac,
 	.update_stats	= falcon_update_stats_gmac,
-	.irq		= efx_port_dummy_op_void,
-	.poll		= efx_port_dummy_op_void,
+	.check_fault 	= falcon_gmac_check_fault,
 };
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
deleted file mode 100644
index 2d22611..0000000
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ /dev/null
@@ -1,1333 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_FALCON_HWDEFS_H
-#define EFX_FALCON_HWDEFS_H
-
-/*
- * Falcon hardware value definitions.
- * Falcon is the internal codename for the SFC4000 controller that is
- * present in SFE400X evaluation boards
- */
-
-/**************************************************************************
- *
- * Falcon registers
- *
- **************************************************************************
- */
-
-/* Address region register */
-#define ADR_REGION_REG_KER	0x00
-#define ADR_REGION0_LBN	0
-#define ADR_REGION0_WIDTH	18
-#define ADR_REGION1_LBN	32
-#define ADR_REGION1_WIDTH	18
-#define ADR_REGION2_LBN	64
-#define ADR_REGION2_WIDTH	18
-#define ADR_REGION3_LBN	96
-#define ADR_REGION3_WIDTH	18
-
-/* Interrupt enable register */
-#define INT_EN_REG_KER 0x0010
-#define KER_INT_KER_LBN 3
-#define KER_INT_KER_WIDTH 1
-#define DRV_INT_EN_KER_LBN 0
-#define DRV_INT_EN_KER_WIDTH 1
-
-/* Interrupt status address register */
-#define INT_ADR_REG_KER	0x0030
-#define NORM_INT_VEC_DIS_KER_LBN 64
-#define NORM_INT_VEC_DIS_KER_WIDTH 1
-#define INT_ADR_KER_LBN 0
-#define INT_ADR_KER_WIDTH EFX_DMA_TYPE_WIDTH(64) /* not 46 for this one */
-
-/* Interrupt status register (B0 only) */
-#define INT_ISR0_B0 0x90
-#define INT_ISR1_B0 0xA0
-
-/* Interrupt acknowledge register (A0/A1 only) */
-#define INT_ACK_REG_KER_A1 0x0050
-#define INT_ACK_DUMMY_DATA_LBN 0
-#define INT_ACK_DUMMY_DATA_WIDTH 32
-
-/* Interrupt acknowledge work-around register (A0/A1 only )*/
-#define WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1 0x0070
-
-/* SPI host command register */
-#define EE_SPI_HCMD_REG_KER 0x0100
-#define EE_SPI_HCMD_CMD_EN_LBN 31
-#define EE_SPI_HCMD_CMD_EN_WIDTH 1
-#define EE_WR_TIMER_ACTIVE_LBN 28
-#define EE_WR_TIMER_ACTIVE_WIDTH 1
-#define EE_SPI_HCMD_SF_SEL_LBN 24
-#define EE_SPI_HCMD_SF_SEL_WIDTH 1
-#define EE_SPI_EEPROM 0
-#define EE_SPI_FLASH 1
-#define EE_SPI_HCMD_DABCNT_LBN 16
-#define EE_SPI_HCMD_DABCNT_WIDTH 5
-#define EE_SPI_HCMD_READ_LBN 15
-#define EE_SPI_HCMD_READ_WIDTH 1
-#define EE_SPI_READ 1
-#define EE_SPI_WRITE 0
-#define EE_SPI_HCMD_DUBCNT_LBN 12
-#define EE_SPI_HCMD_DUBCNT_WIDTH 2
-#define EE_SPI_HCMD_ADBCNT_LBN 8
-#define EE_SPI_HCMD_ADBCNT_WIDTH 2
-#define EE_SPI_HCMD_ENC_LBN 0
-#define EE_SPI_HCMD_ENC_WIDTH 8
-
-/* SPI host address register */
-#define EE_SPI_HADR_REG_KER 0x0110
-#define EE_SPI_HADR_ADR_LBN 0
-#define EE_SPI_HADR_ADR_WIDTH 24
-
-/* SPI host data register */
-#define EE_SPI_HDATA_REG_KER 0x0120
-
-/* SPI/VPD config register */
-#define EE_VPD_CFG_REG_KER 0x0140
-#define EE_VPD_EN_LBN 0
-#define EE_VPD_EN_WIDTH 1
-#define EE_VPD_EN_AD9_MODE_LBN 1
-#define EE_VPD_EN_AD9_MODE_WIDTH 1
-#define EE_EE_CLOCK_DIV_LBN 112
-#define EE_EE_CLOCK_DIV_WIDTH 7
-#define EE_SF_CLOCK_DIV_LBN 120
-#define EE_SF_CLOCK_DIV_WIDTH 7
-
-/* PCIE CORE ACCESS REG */
-#define PCIE_CORE_ADDR_PCIE_DEVICE_CTRL_STAT 0x68
-#define PCIE_CORE_ADDR_PCIE_LINK_CTRL_STAT 0x70
-#define PCIE_CORE_ADDR_ACK_RPL_TIMER 0x700
-#define PCIE_CORE_ADDR_ACK_FREQ 0x70C
-
-/* NIC status register */
-#define NIC_STAT_REG 0x0200
-#define EE_STRAP_EN_LBN 31
-#define EE_STRAP_EN_WIDTH 1
-#define EE_STRAP_OVR_LBN 24
-#define EE_STRAP_OVR_WIDTH 4
-#define ONCHIP_SRAM_LBN 16
-#define ONCHIP_SRAM_WIDTH 1
-#define SF_PRST_LBN 9
-#define SF_PRST_WIDTH 1
-#define EE_PRST_LBN 8
-#define EE_PRST_WIDTH 1
-#define STRAP_PINS_LBN 0
-#define STRAP_PINS_WIDTH 3
-/* These bit definitions are extrapolated from the list of numerical
- * values for STRAP_PINS.
- */
-#define STRAP_10G_LBN 2
-#define STRAP_10G_WIDTH 1
-#define STRAP_PCIE_LBN 0
-#define STRAP_PCIE_WIDTH 1
-
-#define BOOTED_USING_NVDEVICE_LBN 3
-#define BOOTED_USING_NVDEVICE_WIDTH 1
-
-/* GPIO control register */
-#define GPIO_CTL_REG_KER 0x0210
-#define GPIO_USE_NIC_CLK_LBN (30)
-#define GPIO_USE_NIC_CLK_WIDTH (1)
-#define GPIO_OUTPUTS_LBN   (16)
-#define GPIO_OUTPUTS_WIDTH (4)
-#define GPIO_INPUTS_LBN (8)
-#define GPIO_DIRECTION_LBN (24)
-#define GPIO_DIRECTION_WIDTH (4)
-#define GPIO_DIRECTION_OUT (1)
-#define GPIO_SRAM_SLEEP (1 << 1)
-
-#define GPIO3_OEN_LBN (GPIO_DIRECTION_LBN + 3)
-#define	GPIO3_OEN_WIDTH 1
-#define	GPIO2_OEN_LBN (GPIO_DIRECTION_LBN + 2)
-#define	GPIO2_OEN_WIDTH 1
-#define	GPIO1_OEN_LBN (GPIO_DIRECTION_LBN + 1)
-#define	GPIO1_OEN_WIDTH 1
-#define GPIO0_OEN_LBN (GPIO_DIRECTION_LBN + 0)
-#define	GPIO0_OEN_WIDTH 1
-
-#define	GPIO3_OUT_LBN (GPIO_OUTPUTS_LBN + 3)
-#define	GPIO3_OUT_WIDTH 1
-#define	GPIO2_OUT_LBN (GPIO_OUTPUTS_LBN + 2)
-#define	GPIO2_OUT_WIDTH 1
-#define	GPIO1_OUT_LBN (GPIO_OUTPUTS_LBN + 1)
-#define	GPIO1_OUT_WIDTH 1
-#define	GPIO0_OUT_LBN (GPIO_OUTPUTS_LBN + 0)
-#define	GPIO0_OUT_WIDTH 1
-
-#define GPIO3_IN_LBN (GPIO_INPUTS_LBN + 3)
-#define	GPIO3_IN_WIDTH 1
-#define	GPIO2_IN_WIDTH 1
-#define	GPIO1_IN_WIDTH 1
-#define GPIO0_IN_LBN (GPIO_INPUTS_LBN + 0)
-#define	GPIO0_IN_WIDTH 1
-
-/* Global control register */
-#define GLB_CTL_REG_KER	0x0220
-#define EXT_PHY_RST_CTL_LBN 63
-#define EXT_PHY_RST_CTL_WIDTH 1
-#define PCIE_SD_RST_CTL_LBN 61
-#define PCIE_SD_RST_CTL_WIDTH 1
-
-#define PCIE_NSTCK_RST_CTL_LBN 58
-#define PCIE_NSTCK_RST_CTL_WIDTH 1
-#define PCIE_CORE_RST_CTL_LBN 57
-#define PCIE_CORE_RST_CTL_WIDTH 1
-#define EE_RST_CTL_LBN 49
-#define EE_RST_CTL_WIDTH 1
-#define RST_XGRX_LBN 24
-#define RST_XGRX_WIDTH 1
-#define RST_XGTX_LBN 23
-#define RST_XGTX_WIDTH 1
-#define RST_EM_LBN 22
-#define RST_EM_WIDTH 1
-#define EXT_PHY_RST_DUR_LBN 1
-#define EXT_PHY_RST_DUR_WIDTH 3
-#define SWRST_LBN 0
-#define SWRST_WIDTH 1
-#define INCLUDE_IN_RESET 0
-#define EXCLUDE_FROM_RESET 1
-
-/* Fatal interrupt register */
-#define FATAL_INTR_REG_KER 0x0230
-#define RBUF_OWN_INT_KER_EN_LBN 39
-#define RBUF_OWN_INT_KER_EN_WIDTH 1
-#define TBUF_OWN_INT_KER_EN_LBN 38
-#define TBUF_OWN_INT_KER_EN_WIDTH 1
-#define ILL_ADR_INT_KER_EN_LBN 33
-#define ILL_ADR_INT_KER_EN_WIDTH 1
-#define MEM_PERR_INT_KER_LBN 8
-#define MEM_PERR_INT_KER_WIDTH 1
-#define INT_KER_ERROR_LBN 0
-#define INT_KER_ERROR_WIDTH 12
-
-#define DP_CTRL_REG 0x250
-#define FLS_EVQ_ID_LBN 0
-#define FLS_EVQ_ID_WIDTH 11
-
-#define MEM_STAT_REG_KER 0x260
-
-/* Debug probe register */
-#define DEBUG_BLK_SEL_MISC 7
-#define DEBUG_BLK_SEL_SERDES 6
-#define DEBUG_BLK_SEL_EM 5
-#define DEBUG_BLK_SEL_SR 4
-#define DEBUG_BLK_SEL_EV 3
-#define DEBUG_BLK_SEL_RX 2
-#define DEBUG_BLK_SEL_TX 1
-#define DEBUG_BLK_SEL_BIU 0
-
-/* FPGA build version */
-#define ALTERA_BUILD_REG_KER 0x0300
-#define VER_ALL_LBN 0
-#define VER_ALL_WIDTH 32
-
-/* Spare EEPROM bits register (flash 0x390) */
-#define SPARE_REG_KER 0x310
-#define MEM_PERR_EN_TX_DATA_LBN 72
-#define MEM_PERR_EN_TX_DATA_WIDTH 2
-
-/* Timer table for kernel access */
-#define TIMER_CMD_REG_KER 0x420
-#define TIMER_MODE_LBN 12
-#define TIMER_MODE_WIDTH 2
-#define TIMER_MODE_DIS 0
-#define TIMER_MODE_INT_HLDOFF 2
-#define TIMER_VAL_LBN 0
-#define TIMER_VAL_WIDTH 12
-
-/* Driver generated event register */
-#define DRV_EV_REG_KER 0x440
-#define DRV_EV_QID_LBN 64
-#define DRV_EV_QID_WIDTH 12
-#define DRV_EV_DATA_LBN 0
-#define DRV_EV_DATA_WIDTH 64
-
-/* Buffer table configuration register */
-#define BUF_TBL_CFG_REG_KER 0x600
-#define BUF_TBL_MODE_LBN 3
-#define BUF_TBL_MODE_WIDTH 1
-#define BUF_TBL_MODE_HALF 0
-#define BUF_TBL_MODE_FULL 1
-
-/* SRAM receive descriptor cache configuration register */
-#define SRM_RX_DC_CFG_REG_KER 0x610
-#define SRM_RX_DC_BASE_ADR_LBN 0
-#define SRM_RX_DC_BASE_ADR_WIDTH 21
-
-/* SRAM transmit descriptor cache configuration register */
-#define SRM_TX_DC_CFG_REG_KER 0x620
-#define SRM_TX_DC_BASE_ADR_LBN 0
-#define SRM_TX_DC_BASE_ADR_WIDTH 21
-
-/* SRAM configuration register */
-#define SRM_CFG_REG_KER 0x630
-#define SRAM_OOB_BT_INIT_EN_LBN 3
-#define SRAM_OOB_BT_INIT_EN_WIDTH 1
-#define SRM_NUM_BANKS_AND_BANK_SIZE_LBN 0
-#define SRM_NUM_BANKS_AND_BANK_SIZE_WIDTH 3
-#define SRM_NB_BSZ_1BANKS_2M 0
-#define SRM_NB_BSZ_1BANKS_4M 1
-#define SRM_NB_BSZ_1BANKS_8M 2
-#define SRM_NB_BSZ_DEFAULT 3 /* char driver will set the default */
-#define SRM_NB_BSZ_2BANKS_4M 4
-#define SRM_NB_BSZ_2BANKS_8M 5
-#define SRM_NB_BSZ_2BANKS_16M 6
-#define SRM_NB_BSZ_RESERVED 7
-
-/* Special buffer table update register */
-#define BUF_TBL_UPD_REG_KER 0x0650
-#define BUF_UPD_CMD_LBN 63
-#define BUF_UPD_CMD_WIDTH 1
-#define BUF_CLR_CMD_LBN 62
-#define BUF_CLR_CMD_WIDTH 1
-#define BUF_CLR_END_ID_LBN 32
-#define BUF_CLR_END_ID_WIDTH 20
-#define BUF_CLR_START_ID_LBN 0
-#define BUF_CLR_START_ID_WIDTH 20
-
-/* Receive configuration register */
-#define RX_CFG_REG_KER 0x800
-
-/* B0 */
-#define RX_INGR_EN_B0_LBN 47
-#define RX_INGR_EN_B0_WIDTH 1
-#define RX_DESC_PUSH_EN_B0_LBN 43
-#define RX_DESC_PUSH_EN_B0_WIDTH 1
-#define RX_XON_TX_TH_B0_LBN 33
-#define RX_XON_TX_TH_B0_WIDTH 5
-#define RX_XOFF_TX_TH_B0_LBN 28
-#define RX_XOFF_TX_TH_B0_WIDTH 5
-#define RX_USR_BUF_SIZE_B0_LBN 19
-#define RX_USR_BUF_SIZE_B0_WIDTH 9
-#define RX_XON_MAC_TH_B0_LBN 10
-#define RX_XON_MAC_TH_B0_WIDTH 9
-#define RX_XOFF_MAC_TH_B0_LBN 1
-#define RX_XOFF_MAC_TH_B0_WIDTH 9
-#define RX_XOFF_MAC_EN_B0_LBN 0
-#define RX_XOFF_MAC_EN_B0_WIDTH 1
-
-/* A1 */
-#define RX_DESC_PUSH_EN_A1_LBN 35
-#define RX_DESC_PUSH_EN_A1_WIDTH 1
-#define RX_XON_TX_TH_A1_LBN 25
-#define RX_XON_TX_TH_A1_WIDTH 5
-#define RX_XOFF_TX_TH_A1_LBN 20
-#define RX_XOFF_TX_TH_A1_WIDTH 5
-#define RX_USR_BUF_SIZE_A1_LBN 11
-#define RX_USR_BUF_SIZE_A1_WIDTH 9
-#define RX_XON_MAC_TH_A1_LBN 6
-#define RX_XON_MAC_TH_A1_WIDTH 5
-#define RX_XOFF_MAC_TH_A1_LBN 1
-#define RX_XOFF_MAC_TH_A1_WIDTH 5
-#define RX_XOFF_MAC_EN_A1_LBN 0
-#define RX_XOFF_MAC_EN_A1_WIDTH 1
-
-/* Receive filter control register */
-#define RX_FILTER_CTL_REG 0x810
-#define UDP_FULL_SRCH_LIMIT_LBN 32
-#define UDP_FULL_SRCH_LIMIT_WIDTH 8
-#define NUM_KER_LBN 24
-#define NUM_KER_WIDTH 2
-#define UDP_WILD_SRCH_LIMIT_LBN 16
-#define UDP_WILD_SRCH_LIMIT_WIDTH 8
-#define TCP_WILD_SRCH_LIMIT_LBN 8
-#define TCP_WILD_SRCH_LIMIT_WIDTH 8
-#define TCP_FULL_SRCH_LIMIT_LBN 0
-#define TCP_FULL_SRCH_LIMIT_WIDTH 8
-
-/* RX queue flush register */
-#define RX_FLUSH_DESCQ_REG_KER 0x0820
-#define RX_FLUSH_DESCQ_CMD_LBN 24
-#define RX_FLUSH_DESCQ_CMD_WIDTH 1
-#define RX_FLUSH_DESCQ_LBN 0
-#define RX_FLUSH_DESCQ_WIDTH 12
-
-/* Receive descriptor update register */
-#define RX_DESC_UPD_REG_KER_DWORD (0x830 + 12)
-#define RX_DESC_WPTR_DWORD_LBN 0
-#define RX_DESC_WPTR_DWORD_WIDTH 12
-
-/* Receive descriptor cache configuration register */
-#define RX_DC_CFG_REG_KER 0x840
-#define RX_DC_SIZE_LBN 0
-#define RX_DC_SIZE_WIDTH 2
-
-#define RX_DC_PF_WM_REG_KER 0x850
-#define RX_DC_PF_LWM_LBN 0
-#define RX_DC_PF_LWM_WIDTH 6
-
-/* RX no descriptor drop counter */
-#define RX_NODESC_DROP_REG_KER 0x880
-#define RX_NODESC_DROP_CNT_LBN 0
-#define RX_NODESC_DROP_CNT_WIDTH 16
-
-/* RX black magic register */
-#define RX_SELF_RST_REG_KER 0x890
-#define RX_ISCSI_DIS_LBN 17
-#define RX_ISCSI_DIS_WIDTH 1
-#define RX_NODESC_WAIT_DIS_LBN 9
-#define RX_NODESC_WAIT_DIS_WIDTH 1
-#define RX_RECOVERY_EN_LBN 8
-#define RX_RECOVERY_EN_WIDTH 1
-
-/* TX queue flush register */
-#define TX_FLUSH_DESCQ_REG_KER 0x0a00
-#define TX_FLUSH_DESCQ_CMD_LBN 12
-#define TX_FLUSH_DESCQ_CMD_WIDTH 1
-#define TX_FLUSH_DESCQ_LBN 0
-#define TX_FLUSH_DESCQ_WIDTH 12
-
-/* Transmit descriptor update register */
-#define TX_DESC_UPD_REG_KER_DWORD (0xa10 + 12)
-#define TX_DESC_WPTR_DWORD_LBN 0
-#define TX_DESC_WPTR_DWORD_WIDTH 12
-
-/* Transmit descriptor cache configuration register */
-#define TX_DC_CFG_REG_KER 0xa20
-#define TX_DC_SIZE_LBN 0
-#define TX_DC_SIZE_WIDTH 2
-
-/* Transmit checksum configuration register (A0/A1 only) */
-#define TX_CHKSM_CFG_REG_KER_A1 0xa30
-
-/* Transmit configuration register */
-#define TX_CFG_REG_KER 0xa50
-#define TX_NO_EOP_DISC_EN_LBN 5
-#define TX_NO_EOP_DISC_EN_WIDTH 1
-
-/* Transmit configuration register 2 */
-#define TX_CFG2_REG_KER 0xa80
-#define TX_CSR_PUSH_EN_LBN 89
-#define TX_CSR_PUSH_EN_WIDTH 1
-#define TX_RX_SPACER_LBN 64
-#define TX_RX_SPACER_WIDTH 8
-#define TX_SW_EV_EN_LBN 59
-#define TX_SW_EV_EN_WIDTH 1
-#define TX_RX_SPACER_EN_LBN 57
-#define TX_RX_SPACER_EN_WIDTH 1
-#define TX_PREF_THRESHOLD_LBN 19
-#define TX_PREF_THRESHOLD_WIDTH 2
-#define TX_ONE_PKT_PER_Q_LBN 18
-#define TX_ONE_PKT_PER_Q_WIDTH 1
-#define TX_DIS_NON_IP_EV_LBN 17
-#define TX_DIS_NON_IP_EV_WIDTH 1
-#define TX_FLUSH_MIN_LEN_EN_B0_LBN 7
-#define TX_FLUSH_MIN_LEN_EN_B0_WIDTH 1
-
-/* PHY management transmit data register */
-#define MD_TXD_REG_KER 0xc00
-#define MD_TXD_LBN 0
-#define MD_TXD_WIDTH 16
-
-/* PHY management receive data register */
-#define MD_RXD_REG_KER 0xc10
-#define MD_RXD_LBN 0
-#define MD_RXD_WIDTH 16
-
-/* PHY management configuration & status register */
-#define MD_CS_REG_KER 0xc20
-#define MD_GC_LBN 4
-#define MD_GC_WIDTH 1
-#define MD_RIC_LBN 2
-#define MD_RIC_WIDTH 1
-#define MD_RDC_LBN 1
-#define MD_RDC_WIDTH 1
-#define MD_WRC_LBN 0
-#define MD_WRC_WIDTH 1
-
-/* PHY management PHY address register */
-#define MD_PHY_ADR_REG_KER 0xc30
-#define MD_PHY_ADR_LBN 0
-#define MD_PHY_ADR_WIDTH 16
-
-/* PHY management ID register */
-#define MD_ID_REG_KER 0xc40
-#define MD_PRT_ADR_LBN 11
-#define MD_PRT_ADR_WIDTH 5
-#define MD_DEV_ADR_LBN 6
-#define MD_DEV_ADR_WIDTH 5
-
-/* PHY management status & mask register (DWORD read only) */
-#define MD_STAT_REG_KER 0xc50
-#define MD_BSERR_LBN 2
-#define MD_BSERR_WIDTH 1
-#define MD_LNFL_LBN 1
-#define MD_LNFL_WIDTH 1
-#define MD_BSY_LBN 0
-#define MD_BSY_WIDTH 1
-
-/* Port 0 and 1 MAC stats registers */
-#define MAC0_STAT_DMA_REG_KER 0xc60
-#define MAC_STAT_DMA_CMD_LBN 48
-#define MAC_STAT_DMA_CMD_WIDTH 1
-#define MAC_STAT_DMA_ADR_LBN 0
-#define MAC_STAT_DMA_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
-
-/* Port 0 and 1 MAC control registers */
-#define MAC0_CTRL_REG_KER 0xc80
-#define MAC_XOFF_VAL_LBN 16
-#define MAC_XOFF_VAL_WIDTH 16
-#define TXFIFO_DRAIN_EN_B0_LBN 7
-#define TXFIFO_DRAIN_EN_B0_WIDTH 1
-#define MAC_BCAD_ACPT_LBN 4
-#define MAC_BCAD_ACPT_WIDTH 1
-#define MAC_UC_PROM_LBN 3
-#define MAC_UC_PROM_WIDTH 1
-#define MAC_LINK_STATUS_LBN 2
-#define MAC_LINK_STATUS_WIDTH 1
-#define MAC_SPEED_LBN 0
-#define MAC_SPEED_WIDTH 2
-
-/* 10G XAUI XGXS default values */
-#define XX_TXDRV_DEQ_DEFAULT 0xe /* deq=.6 */
-#define XX_TXDRV_DTX_DEFAULT 0x5 /* 1.25 */
-#define XX_SD_CTL_DRV_DEFAULT 0  /* 20mA */
-
-/* Multicast address hash table */
-#define MAC_MCAST_HASH_REG0_KER 0xca0
-#define MAC_MCAST_HASH_REG1_KER 0xcb0
-
-/* GMAC configuration register 1 */
-#define GM_CFG1_REG 0xe00
-#define GM_SW_RST_LBN 31
-#define GM_SW_RST_WIDTH 1
-#define GM_LOOP_LBN 8
-#define GM_LOOP_WIDTH 1
-#define GM_RX_FC_EN_LBN 5
-#define GM_RX_FC_EN_WIDTH 1
-#define GM_TX_FC_EN_LBN 4
-#define GM_TX_FC_EN_WIDTH 1
-#define GM_RX_EN_LBN 2
-#define GM_RX_EN_WIDTH 1
-#define GM_TX_EN_LBN 0
-#define GM_TX_EN_WIDTH 1
-
-/* GMAC configuration register 2 */
-#define GM_CFG2_REG 0xe10
-#define GM_PAMBL_LEN_LBN 12
-#define GM_PAMBL_LEN_WIDTH 4
-#define GM_IF_MODE_LBN 8
-#define GM_IF_MODE_WIDTH 2
-#define GM_LEN_CHK_LBN 4
-#define GM_LEN_CHK_WIDTH 1
-#define GM_PAD_CRC_EN_LBN 2
-#define GM_PAD_CRC_EN_WIDTH 1
-#define GM_FD_LBN 0
-#define GM_FD_WIDTH 1
-
-/* GMAC maximum frame length register */
-#define GM_MAX_FLEN_REG 0xe40
-#define GM_MAX_FLEN_LBN 0
-#define GM_MAX_FLEN_WIDTH 16
-
-/* GMAC station address register 1 */
-#define GM_ADR1_REG 0xf00
-#define GM_HWADDR_5_LBN 24
-#define GM_HWADDR_5_WIDTH 8
-#define GM_HWADDR_4_LBN 16
-#define GM_HWADDR_4_WIDTH 8
-#define GM_HWADDR_3_LBN 8
-#define GM_HWADDR_3_WIDTH 8
-#define GM_HWADDR_2_LBN 0
-#define GM_HWADDR_2_WIDTH 8
-
-/* GMAC station address register 2 */
-#define GM_ADR2_REG 0xf10
-#define GM_HWADDR_1_LBN 24
-#define GM_HWADDR_1_WIDTH 8
-#define GM_HWADDR_0_LBN 16
-#define GM_HWADDR_0_WIDTH 8
-
-/* GMAC FIFO configuration register 0 */
-#define GMF_CFG0_REG 0xf20
-#define GMF_FTFENREQ_LBN 12
-#define GMF_FTFENREQ_WIDTH 1
-#define GMF_STFENREQ_LBN 11
-#define GMF_STFENREQ_WIDTH 1
-#define GMF_FRFENREQ_LBN 10
-#define GMF_FRFENREQ_WIDTH 1
-#define GMF_SRFENREQ_LBN 9
-#define GMF_SRFENREQ_WIDTH 1
-#define GMF_WTMENREQ_LBN 8
-#define GMF_WTMENREQ_WIDTH 1
-
-/* GMAC FIFO configuration register 1 */
-#define GMF_CFG1_REG 0xf30
-#define GMF_CFGFRTH_LBN 16
-#define GMF_CFGFRTH_WIDTH 5
-#define GMF_CFGXOFFRTX_LBN 0
-#define GMF_CFGXOFFRTX_WIDTH 16
-
-/* GMAC FIFO configuration register 2 */
-#define GMF_CFG2_REG 0xf40
-#define GMF_CFGHWM_LBN 16
-#define GMF_CFGHWM_WIDTH 6
-#define GMF_CFGLWM_LBN 0
-#define GMF_CFGLWM_WIDTH 6
-
-/* GMAC FIFO configuration register 3 */
-#define GMF_CFG3_REG 0xf50
-#define GMF_CFGHWMFT_LBN 16
-#define GMF_CFGHWMFT_WIDTH 6
-#define GMF_CFGFTTH_LBN 0
-#define GMF_CFGFTTH_WIDTH 6
-
-/* GMAC FIFO configuration register 4 */
-#define GMF_CFG4_REG 0xf60
-#define GMF_HSTFLTRFRM_PAUSE_LBN 12
-#define GMF_HSTFLTRFRM_PAUSE_WIDTH 12
-
-/* GMAC FIFO configuration register 5 */
-#define GMF_CFG5_REG 0xf70
-#define GMF_CFGHDPLX_LBN 22
-#define GMF_CFGHDPLX_WIDTH 1
-#define GMF_CFGBYTMODE_LBN 19
-#define GMF_CFGBYTMODE_WIDTH 1
-#define GMF_HSTDRPLT64_LBN 18
-#define GMF_HSTDRPLT64_WIDTH 1
-#define GMF_HSTFLTRFRMDC_PAUSE_LBN 12
-#define GMF_HSTFLTRFRMDC_PAUSE_WIDTH 1
-
-/* XGMAC address register low */
-#define XM_ADR_LO_REG 0x1200
-#define XM_ADR_3_LBN 24
-#define XM_ADR_3_WIDTH 8
-#define XM_ADR_2_LBN 16
-#define XM_ADR_2_WIDTH 8
-#define XM_ADR_1_LBN 8
-#define XM_ADR_1_WIDTH 8
-#define XM_ADR_0_LBN 0
-#define XM_ADR_0_WIDTH 8
-
-/* XGMAC address register high */
-#define XM_ADR_HI_REG 0x1210
-#define XM_ADR_5_LBN 8
-#define XM_ADR_5_WIDTH 8
-#define XM_ADR_4_LBN 0
-#define XM_ADR_4_WIDTH 8
-
-/* XGMAC global configuration */
-#define XM_GLB_CFG_REG 0x1220
-#define XM_RX_STAT_EN_LBN 11
-#define XM_RX_STAT_EN_WIDTH 1
-#define XM_TX_STAT_EN_LBN 10
-#define XM_TX_STAT_EN_WIDTH 1
-#define XM_RX_JUMBO_MODE_LBN 6
-#define XM_RX_JUMBO_MODE_WIDTH 1
-#define XM_INTCLR_MODE_LBN 3
-#define XM_INTCLR_MODE_WIDTH 1
-#define XM_CORE_RST_LBN 0
-#define XM_CORE_RST_WIDTH 1
-
-/* XGMAC transmit configuration */
-#define XM_TX_CFG_REG 0x1230
-#define XM_IPG_LBN 16
-#define XM_IPG_WIDTH 4
-#define XM_FCNTL_LBN 10
-#define XM_FCNTL_WIDTH 1
-#define XM_TXCRC_LBN 8
-#define XM_TXCRC_WIDTH 1
-#define XM_AUTO_PAD_LBN 5
-#define XM_AUTO_PAD_WIDTH 1
-#define XM_TX_PRMBL_LBN 2
-#define XM_TX_PRMBL_WIDTH 1
-#define XM_TXEN_LBN 1
-#define XM_TXEN_WIDTH 1
-
-/* XGMAC receive configuration */
-#define XM_RX_CFG_REG 0x1240
-#define XM_PASS_CRC_ERR_LBN 25
-#define XM_PASS_CRC_ERR_WIDTH 1
-#define XM_ACPT_ALL_MCAST_LBN 11
-#define XM_ACPT_ALL_MCAST_WIDTH 1
-#define XM_ACPT_ALL_UCAST_LBN 9
-#define XM_ACPT_ALL_UCAST_WIDTH 1
-#define XM_AUTO_DEPAD_LBN 8
-#define XM_AUTO_DEPAD_WIDTH 1
-#define XM_RXEN_LBN 1
-#define XM_RXEN_WIDTH 1
-
-/* XGMAC management interrupt mask register */
-#define XM_MGT_INT_MSK_REG_B0 0x1250
-#define XM_MSK_PRMBLE_ERR_LBN 2
-#define XM_MSK_PRMBLE_ERR_WIDTH 1
-#define XM_MSK_RMTFLT_LBN 1
-#define XM_MSK_RMTFLT_WIDTH 1
-#define XM_MSK_LCLFLT_LBN 0
-#define XM_MSK_LCLFLT_WIDTH 1
-
-/* XGMAC flow control register */
-#define XM_FC_REG 0x1270
-#define XM_PAUSE_TIME_LBN 16
-#define XM_PAUSE_TIME_WIDTH 16
-#define XM_DIS_FCNTL_LBN 0
-#define XM_DIS_FCNTL_WIDTH 1
-
-/* XGMAC pause time count register */
-#define XM_PAUSE_TIME_REG 0x1290
-
-/* XGMAC transmit parameter register */
-#define XM_TX_PARAM_REG 0x012d0
-#define XM_TX_JUMBO_MODE_LBN 31
-#define XM_TX_JUMBO_MODE_WIDTH 1
-#define XM_MAX_TX_FRM_SIZE_LBN 16
-#define XM_MAX_TX_FRM_SIZE_WIDTH 14
-
-/* XGMAC receive parameter register */
-#define XM_RX_PARAM_REG 0x12e0
-#define XM_MAX_RX_FRM_SIZE_LBN 0
-#define XM_MAX_RX_FRM_SIZE_WIDTH 14
-
-/* XGMAC management interrupt status register */
-#define XM_MGT_INT_REG_B0 0x12f0
-#define XM_PRMBLE_ERR 2
-#define XM_PRMBLE_WIDTH 1
-#define XM_RMTFLT_LBN 1
-#define XM_RMTFLT_WIDTH 1
-#define XM_LCLFLT_LBN 0
-#define XM_LCLFLT_WIDTH 1
-
-/* XGXS/XAUI powerdown/reset register */
-#define XX_PWR_RST_REG 0x1300
-
-#define XX_SD_RST_ACT_LBN 16
-#define XX_SD_RST_ACT_WIDTH 1
-#define XX_PWRDND_EN_LBN 15
-#define XX_PWRDND_EN_WIDTH 1
-#define XX_PWRDNC_EN_LBN 14
-#define XX_PWRDNC_EN_WIDTH 1
-#define XX_PWRDNB_EN_LBN 13
-#define XX_PWRDNB_EN_WIDTH 1
-#define XX_PWRDNA_EN_LBN 12
-#define XX_PWRDNA_EN_WIDTH 1
-#define XX_RSTPLLCD_EN_LBN 9
-#define XX_RSTPLLCD_EN_WIDTH 1
-#define XX_RSTPLLAB_EN_LBN 8
-#define XX_RSTPLLAB_EN_WIDTH 1
-#define XX_RESETD_EN_LBN 7
-#define XX_RESETD_EN_WIDTH 1
-#define XX_RESETC_EN_LBN 6
-#define XX_RESETC_EN_WIDTH 1
-#define XX_RESETB_EN_LBN 5
-#define XX_RESETB_EN_WIDTH 1
-#define XX_RESETA_EN_LBN 4
-#define XX_RESETA_EN_WIDTH 1
-#define XX_RSTXGXSRX_EN_LBN 2
-#define XX_RSTXGXSRX_EN_WIDTH 1
-#define XX_RSTXGXSTX_EN_LBN 1
-#define XX_RSTXGXSTX_EN_WIDTH 1
-#define XX_RST_XX_EN_LBN 0
-#define XX_RST_XX_EN_WIDTH 1
-
-/* XGXS/XAUI powerdown/reset control register */
-#define XX_SD_CTL_REG 0x1310
-#define XX_HIDRVD_LBN 15
-#define XX_HIDRVD_WIDTH 1
-#define XX_LODRVD_LBN 14
-#define XX_LODRVD_WIDTH 1
-#define XX_HIDRVC_LBN 13
-#define XX_HIDRVC_WIDTH 1
-#define XX_LODRVC_LBN 12
-#define XX_LODRVC_WIDTH 1
-#define XX_HIDRVB_LBN 11
-#define XX_HIDRVB_WIDTH 1
-#define XX_LODRVB_LBN 10
-#define XX_LODRVB_WIDTH 1
-#define XX_HIDRVA_LBN 9
-#define XX_HIDRVA_WIDTH 1
-#define XX_LODRVA_LBN 8
-#define XX_LODRVA_WIDTH 1
-#define XX_LPBKD_LBN 3
-#define XX_LPBKD_WIDTH 1
-#define XX_LPBKC_LBN 2
-#define XX_LPBKC_WIDTH 1
-#define XX_LPBKB_LBN 1
-#define XX_LPBKB_WIDTH 1
-#define XX_LPBKA_LBN 0
-#define XX_LPBKA_WIDTH 1
-
-#define XX_TXDRV_CTL_REG 0x1320
-#define XX_DEQD_LBN 28
-#define XX_DEQD_WIDTH 4
-#define XX_DEQC_LBN 24
-#define XX_DEQC_WIDTH 4
-#define XX_DEQB_LBN 20
-#define XX_DEQB_WIDTH 4
-#define XX_DEQA_LBN 16
-#define XX_DEQA_WIDTH 4
-#define XX_DTXD_LBN 12
-#define XX_DTXD_WIDTH 4
-#define XX_DTXC_LBN 8
-#define XX_DTXC_WIDTH 4
-#define XX_DTXB_LBN 4
-#define XX_DTXB_WIDTH 4
-#define XX_DTXA_LBN 0
-#define XX_DTXA_WIDTH 4
-
-/* XAUI XGXS core status register */
-#define XX_CORE_STAT_REG 0x1360
-#define XX_FORCE_SIG_LBN 24
-#define XX_FORCE_SIG_WIDTH 8
-#define XX_FORCE_SIG_DECODE_FORCED 0xff
-#define XX_XGXS_LB_EN_LBN 23
-#define XX_XGXS_LB_EN_WIDTH 1
-#define XX_XGMII_LB_EN_LBN 22
-#define XX_XGMII_LB_EN_WIDTH 1
-#define XX_ALIGN_DONE_LBN 20
-#define XX_ALIGN_DONE_WIDTH 1
-#define XX_SYNC_STAT_LBN 16
-#define XX_SYNC_STAT_WIDTH 4
-#define XX_SYNC_STAT_DECODE_SYNCED 0xf
-#define XX_COMMA_DET_LBN 12
-#define XX_COMMA_DET_WIDTH 4
-#define XX_COMMA_DET_DECODE_DETECTED 0xf
-#define XX_COMMA_DET_RESET 0xf
-#define XX_CHARERR_LBN 4
-#define XX_CHARERR_WIDTH 4
-#define XX_CHARERR_RESET 0xf
-#define XX_DISPERR_LBN 0
-#define XX_DISPERR_WIDTH 4
-#define XX_DISPERR_RESET 0xf
-
-/* Receive filter table */
-#define RX_FILTER_TBL0 0xF00000
-
-/* Receive descriptor pointer table */
-#define RX_DESC_PTR_TBL_KER_A1 0x11800
-#define RX_DESC_PTR_TBL_KER_B0 0xF40000
-#define RX_DESC_PTR_TBL_KER_P0 0x900
-#define RX_ISCSI_DDIG_EN_LBN 88
-#define RX_ISCSI_DDIG_EN_WIDTH 1
-#define RX_ISCSI_HDIG_EN_LBN 87
-#define RX_ISCSI_HDIG_EN_WIDTH 1
-#define RX_DESCQ_BUF_BASE_ID_LBN 36
-#define RX_DESCQ_BUF_BASE_ID_WIDTH 20
-#define RX_DESCQ_EVQ_ID_LBN 24
-#define RX_DESCQ_EVQ_ID_WIDTH 12
-#define RX_DESCQ_OWNER_ID_LBN 10
-#define RX_DESCQ_OWNER_ID_WIDTH 14
-#define RX_DESCQ_LABEL_LBN 5
-#define RX_DESCQ_LABEL_WIDTH 5
-#define RX_DESCQ_SIZE_LBN 3
-#define RX_DESCQ_SIZE_WIDTH 2
-#define RX_DESCQ_SIZE_4K 3
-#define RX_DESCQ_SIZE_2K 2
-#define RX_DESCQ_SIZE_1K 1
-#define RX_DESCQ_SIZE_512 0
-#define RX_DESCQ_TYPE_LBN 2
-#define RX_DESCQ_TYPE_WIDTH 1
-#define RX_DESCQ_JUMBO_LBN 1
-#define RX_DESCQ_JUMBO_WIDTH 1
-#define RX_DESCQ_EN_LBN 0
-#define RX_DESCQ_EN_WIDTH 1
-
-/* Transmit descriptor pointer table */
-#define TX_DESC_PTR_TBL_KER_A1 0x11900
-#define TX_DESC_PTR_TBL_KER_B0 0xF50000
-#define TX_DESC_PTR_TBL_KER_P0 0xa40
-#define TX_NON_IP_DROP_DIS_B0_LBN 91
-#define TX_NON_IP_DROP_DIS_B0_WIDTH 1
-#define TX_IP_CHKSM_DIS_B0_LBN 90
-#define TX_IP_CHKSM_DIS_B0_WIDTH 1
-#define TX_TCP_CHKSM_DIS_B0_LBN 89
-#define TX_TCP_CHKSM_DIS_B0_WIDTH 1
-#define TX_DESCQ_EN_LBN 88
-#define TX_DESCQ_EN_WIDTH 1
-#define TX_ISCSI_DDIG_EN_LBN 87
-#define TX_ISCSI_DDIG_EN_WIDTH 1
-#define TX_ISCSI_HDIG_EN_LBN 86
-#define TX_ISCSI_HDIG_EN_WIDTH 1
-#define TX_DESCQ_BUF_BASE_ID_LBN 36
-#define TX_DESCQ_BUF_BASE_ID_WIDTH 20
-#define TX_DESCQ_EVQ_ID_LBN 24
-#define TX_DESCQ_EVQ_ID_WIDTH 12
-#define TX_DESCQ_OWNER_ID_LBN 10
-#define TX_DESCQ_OWNER_ID_WIDTH 14
-#define TX_DESCQ_LABEL_LBN 5
-#define TX_DESCQ_LABEL_WIDTH 5
-#define TX_DESCQ_SIZE_LBN 3
-#define TX_DESCQ_SIZE_WIDTH 2
-#define TX_DESCQ_SIZE_4K 3
-#define TX_DESCQ_SIZE_2K 2
-#define TX_DESCQ_SIZE_1K 1
-#define TX_DESCQ_SIZE_512 0
-#define TX_DESCQ_TYPE_LBN 1
-#define TX_DESCQ_TYPE_WIDTH 2
-
-/* Event queue pointer */
-#define EVQ_PTR_TBL_KER_A1 0x11a00
-#define EVQ_PTR_TBL_KER_B0 0xf60000
-#define EVQ_PTR_TBL_KER_P0 0x500
-#define EVQ_EN_LBN 23
-#define EVQ_EN_WIDTH 1
-#define EVQ_SIZE_LBN 20
-#define EVQ_SIZE_WIDTH 3
-#define EVQ_SIZE_32K 6
-#define EVQ_SIZE_16K 5
-#define EVQ_SIZE_8K 4
-#define EVQ_SIZE_4K 3
-#define EVQ_SIZE_2K 2
-#define EVQ_SIZE_1K 1
-#define EVQ_SIZE_512 0
-#define EVQ_BUF_BASE_ID_LBN 0
-#define EVQ_BUF_BASE_ID_WIDTH 20
-
-/* Event queue read pointer */
-#define EVQ_RPTR_REG_KER_A1 0x11b00
-#define EVQ_RPTR_REG_KER_B0 0xfa0000
-#define EVQ_RPTR_REG_KER_DWORD (EVQ_RPTR_REG_KER + 0)
-#define EVQ_RPTR_DWORD_LBN 0
-#define EVQ_RPTR_DWORD_WIDTH 14
-
-/* RSS indirection table */
-#define RX_RSS_INDIR_TBL_B0 0xFB0000
-#define RX_RSS_INDIR_ENT_B0_LBN 0
-#define RX_RSS_INDIR_ENT_B0_WIDTH 6
-
-/* Special buffer descriptors (full-mode) */
-#define BUF_FULL_TBL_KER_A1 0x8000
-#define BUF_FULL_TBL_KER_B0 0x800000
-#define IP_DAT_BUF_SIZE_LBN 50
-#define IP_DAT_BUF_SIZE_WIDTH 1
-#define IP_DAT_BUF_SIZE_8K 1
-#define IP_DAT_BUF_SIZE_4K 0
-#define BUF_ADR_REGION_LBN 48
-#define BUF_ADR_REGION_WIDTH 2
-#define BUF_ADR_FBUF_LBN 14
-#define BUF_ADR_FBUF_WIDTH 34
-#define BUF_OWNER_ID_FBUF_LBN 0
-#define BUF_OWNER_ID_FBUF_WIDTH 14
-
-/* Transmit descriptor */
-#define TX_KER_PORT_LBN 63
-#define TX_KER_PORT_WIDTH 1
-#define TX_KER_CONT_LBN 62
-#define TX_KER_CONT_WIDTH 1
-#define TX_KER_BYTE_CNT_LBN 48
-#define TX_KER_BYTE_CNT_WIDTH 14
-#define TX_KER_BUF_REGION_LBN 46
-#define TX_KER_BUF_REGION_WIDTH 2
-#define TX_KER_BUF_REGION0_DECODE 0
-#define TX_KER_BUF_REGION1_DECODE 1
-#define TX_KER_BUF_REGION2_DECODE 2
-#define TX_KER_BUF_REGION3_DECODE 3
-#define TX_KER_BUF_ADR_LBN 0
-#define TX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
-
-/* Receive descriptor */
-#define RX_KER_BUF_SIZE_LBN 48
-#define RX_KER_BUF_SIZE_WIDTH 14
-#define RX_KER_BUF_REGION_LBN 46
-#define RX_KER_BUF_REGION_WIDTH 2
-#define RX_KER_BUF_REGION0_DECODE 0
-#define RX_KER_BUF_REGION1_DECODE 1
-#define RX_KER_BUF_REGION2_DECODE 2
-#define RX_KER_BUF_REGION3_DECODE 3
-#define RX_KER_BUF_ADR_LBN 0
-#define RX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
-
-/**************************************************************************
- *
- * Falcon events
- *
- **************************************************************************
- */
-
-/* Event queue entries */
-#define EV_CODE_LBN 60
-#define EV_CODE_WIDTH 4
-#define RX_IP_EV_DECODE 0
-#define TX_IP_EV_DECODE 2
-#define DRIVER_EV_DECODE 5
-#define GLOBAL_EV_DECODE 6
-#define DRV_GEN_EV_DECODE 7
-#define WHOLE_EVENT_LBN 0
-#define WHOLE_EVENT_WIDTH 64
-
-/* Receive events */
-#define RX_EV_PKT_OK_LBN 56
-#define RX_EV_PKT_OK_WIDTH 1
-#define RX_EV_PAUSE_FRM_ERR_LBN 55
-#define RX_EV_PAUSE_FRM_ERR_WIDTH 1
-#define RX_EV_BUF_OWNER_ID_ERR_LBN 54
-#define RX_EV_BUF_OWNER_ID_ERR_WIDTH 1
-#define RX_EV_IF_FRAG_ERR_LBN 53
-#define RX_EV_IF_FRAG_ERR_WIDTH 1
-#define RX_EV_IP_HDR_CHKSUM_ERR_LBN 52
-#define RX_EV_IP_HDR_CHKSUM_ERR_WIDTH 1
-#define RX_EV_TCP_UDP_CHKSUM_ERR_LBN 51
-#define RX_EV_TCP_UDP_CHKSUM_ERR_WIDTH 1
-#define RX_EV_ETH_CRC_ERR_LBN 50
-#define RX_EV_ETH_CRC_ERR_WIDTH 1
-#define RX_EV_FRM_TRUNC_LBN 49
-#define RX_EV_FRM_TRUNC_WIDTH 1
-#define RX_EV_DRIB_NIB_LBN 48
-#define RX_EV_DRIB_NIB_WIDTH 1
-#define RX_EV_TOBE_DISC_LBN 47
-#define RX_EV_TOBE_DISC_WIDTH 1
-#define RX_EV_PKT_TYPE_LBN 44
-#define RX_EV_PKT_TYPE_WIDTH 3
-#define RX_EV_PKT_TYPE_ETH_DECODE 0
-#define RX_EV_PKT_TYPE_LLC_DECODE 1
-#define RX_EV_PKT_TYPE_JUMBO_DECODE 2
-#define RX_EV_PKT_TYPE_VLAN_DECODE 3
-#define RX_EV_PKT_TYPE_VLAN_LLC_DECODE 4
-#define RX_EV_PKT_TYPE_VLAN_JUMBO_DECODE 5
-#define RX_EV_HDR_TYPE_LBN 42
-#define RX_EV_HDR_TYPE_WIDTH 2
-#define RX_EV_HDR_TYPE_TCP_IPV4_DECODE 0
-#define RX_EV_HDR_TYPE_UDP_IPV4_DECODE 1
-#define RX_EV_HDR_TYPE_OTHER_IP_DECODE 2
-#define RX_EV_HDR_TYPE_NON_IP_DECODE 3
-#define RX_EV_HDR_TYPE_HAS_CHECKSUMS(hdr_type) \
-	((hdr_type) <= RX_EV_HDR_TYPE_UDP_IPV4_DECODE)
-#define RX_EV_MCAST_HASH_MATCH_LBN 40
-#define RX_EV_MCAST_HASH_MATCH_WIDTH 1
-#define RX_EV_MCAST_PKT_LBN 39
-#define RX_EV_MCAST_PKT_WIDTH 1
-#define RX_EV_Q_LABEL_LBN 32
-#define RX_EV_Q_LABEL_WIDTH 5
-#define RX_EV_JUMBO_CONT_LBN 31
-#define RX_EV_JUMBO_CONT_WIDTH 1
-#define RX_EV_BYTE_CNT_LBN 16
-#define RX_EV_BYTE_CNT_WIDTH 14
-#define RX_EV_SOP_LBN 15
-#define RX_EV_SOP_WIDTH 1
-#define RX_EV_DESC_PTR_LBN 0
-#define RX_EV_DESC_PTR_WIDTH 12
-
-/* Transmit events */
-#define TX_EV_PKT_ERR_LBN 38
-#define TX_EV_PKT_ERR_WIDTH 1
-#define TX_EV_Q_LABEL_LBN 32
-#define TX_EV_Q_LABEL_WIDTH 5
-#define TX_EV_WQ_FF_FULL_LBN 15
-#define TX_EV_WQ_FF_FULL_WIDTH 1
-#define TX_EV_COMP_LBN 12
-#define TX_EV_COMP_WIDTH 1
-#define TX_EV_DESC_PTR_LBN 0
-#define TX_EV_DESC_PTR_WIDTH 12
-
-/* Driver events */
-#define DRIVER_EV_SUB_CODE_LBN 56
-#define DRIVER_EV_SUB_CODE_WIDTH 4
-#define DRIVER_EV_SUB_DATA_LBN 0
-#define DRIVER_EV_SUB_DATA_WIDTH 14
-#define TX_DESCQ_FLS_DONE_EV_DECODE 0
-#define RX_DESCQ_FLS_DONE_EV_DECODE 1
-#define EVQ_INIT_DONE_EV_DECODE 2
-#define EVQ_NOT_EN_EV_DECODE 3
-#define RX_DESCQ_FLSFF_OVFL_EV_DECODE 4
-#define SRM_UPD_DONE_EV_DECODE 5
-#define WAKE_UP_EV_DECODE 6
-#define TX_PKT_NON_TCP_UDP_DECODE 9
-#define TIMER_EV_DECODE 10
-#define RX_RECOVERY_EV_DECODE 11
-#define RX_DSC_ERROR_EV_DECODE 14
-#define TX_DSC_ERROR_EV_DECODE 15
-#define DRIVER_EV_TX_DESCQ_ID_LBN 0
-#define DRIVER_EV_TX_DESCQ_ID_WIDTH 12
-#define DRIVER_EV_RX_FLUSH_FAIL_LBN 12
-#define DRIVER_EV_RX_FLUSH_FAIL_WIDTH 1
-#define DRIVER_EV_RX_DESCQ_ID_LBN 0
-#define DRIVER_EV_RX_DESCQ_ID_WIDTH 12
-#define SRM_CLR_EV_DECODE 0
-#define SRM_UPD_EV_DECODE 1
-#define SRM_ILLCLR_EV_DECODE 2
-
-/* Global events */
-#define RX_RECOVERY_B0_LBN 12
-#define RX_RECOVERY_B0_WIDTH 1
-#define XG_MNT_INTR_B0_LBN 11
-#define XG_MNT_INTR_B0_WIDTH 1
-#define RX_RECOVERY_A1_LBN 11
-#define RX_RECOVERY_A1_WIDTH 1
-#define XFP_PHY_INTR_LBN 10
-#define XFP_PHY_INTR_WIDTH 1
-#define XG_PHY_INTR_LBN 9
-#define XG_PHY_INTR_WIDTH 1
-#define G_PHY1_INTR_LBN 8
-#define G_PHY1_INTR_WIDTH 1
-#define G_PHY0_INTR_LBN 7
-#define G_PHY0_INTR_WIDTH 1
-
-/* Driver-generated test events */
-#define EVQ_MAGIC_LBN 0
-#define EVQ_MAGIC_WIDTH 32
-
-/**************************************************************************
- *
- * Falcon MAC stats
- *
- **************************************************************************
- *
- */
-
-#define GRxGoodOct_offset 0x0
-#define GRxGoodOct_WIDTH 48
-#define GRxBadOct_offset 0x8
-#define GRxBadOct_WIDTH 48
-#define GRxMissPkt_offset 0x10
-#define GRxMissPkt_WIDTH 32
-#define GRxFalseCRS_offset 0x14
-#define GRxFalseCRS_WIDTH 32
-#define GRxPausePkt_offset 0x18
-#define GRxPausePkt_WIDTH 32
-#define GRxBadPkt_offset 0x1C
-#define GRxBadPkt_WIDTH 32
-#define GRxUcastPkt_offset 0x20
-#define GRxUcastPkt_WIDTH 32
-#define GRxMcastPkt_offset 0x24
-#define GRxMcastPkt_WIDTH 32
-#define GRxBcastPkt_offset 0x28
-#define GRxBcastPkt_WIDTH 32
-#define GRxGoodLt64Pkt_offset 0x2C
-#define GRxGoodLt64Pkt_WIDTH 32
-#define GRxBadLt64Pkt_offset 0x30
-#define GRxBadLt64Pkt_WIDTH 32
-#define GRx64Pkt_offset 0x34
-#define GRx64Pkt_WIDTH 32
-#define GRx65to127Pkt_offset 0x38
-#define GRx65to127Pkt_WIDTH 32
-#define GRx128to255Pkt_offset 0x3C
-#define GRx128to255Pkt_WIDTH 32
-#define GRx256to511Pkt_offset 0x40
-#define GRx256to511Pkt_WIDTH 32
-#define GRx512to1023Pkt_offset 0x44
-#define GRx512to1023Pkt_WIDTH 32
-#define GRx1024to15xxPkt_offset 0x48
-#define GRx1024to15xxPkt_WIDTH 32
-#define GRx15xxtoJumboPkt_offset 0x4C
-#define GRx15xxtoJumboPkt_WIDTH 32
-#define GRxGtJumboPkt_offset 0x50
-#define GRxGtJumboPkt_WIDTH 32
-#define GRxFcsErr64to15xxPkt_offset 0x54
-#define GRxFcsErr64to15xxPkt_WIDTH 32
-#define GRxFcsErr15xxtoJumboPkt_offset 0x58
-#define GRxFcsErr15xxtoJumboPkt_WIDTH 32
-#define GRxFcsErrGtJumboPkt_offset 0x5C
-#define GRxFcsErrGtJumboPkt_WIDTH 32
-#define GTxGoodBadOct_offset 0x80
-#define GTxGoodBadOct_WIDTH 48
-#define GTxGoodOct_offset 0x88
-#define GTxGoodOct_WIDTH 48
-#define GTxSglColPkt_offset 0x90
-#define GTxSglColPkt_WIDTH 32
-#define GTxMultColPkt_offset 0x94
-#define GTxMultColPkt_WIDTH 32
-#define GTxExColPkt_offset 0x98
-#define GTxExColPkt_WIDTH 32
-#define GTxDefPkt_offset 0x9C
-#define GTxDefPkt_WIDTH 32
-#define GTxLateCol_offset 0xA0
-#define GTxLateCol_WIDTH 32
-#define GTxExDefPkt_offset 0xA4
-#define GTxExDefPkt_WIDTH 32
-#define GTxPausePkt_offset 0xA8
-#define GTxPausePkt_WIDTH 32
-#define GTxBadPkt_offset 0xAC
-#define GTxBadPkt_WIDTH 32
-#define GTxUcastPkt_offset 0xB0
-#define GTxUcastPkt_WIDTH 32
-#define GTxMcastPkt_offset 0xB4
-#define GTxMcastPkt_WIDTH 32
-#define GTxBcastPkt_offset 0xB8
-#define GTxBcastPkt_WIDTH 32
-#define GTxLt64Pkt_offset 0xBC
-#define GTxLt64Pkt_WIDTH 32
-#define GTx64Pkt_offset 0xC0
-#define GTx64Pkt_WIDTH 32
-#define GTx65to127Pkt_offset 0xC4
-#define GTx65to127Pkt_WIDTH 32
-#define GTx128to255Pkt_offset 0xC8
-#define GTx128to255Pkt_WIDTH 32
-#define GTx256to511Pkt_offset 0xCC
-#define GTx256to511Pkt_WIDTH 32
-#define GTx512to1023Pkt_offset 0xD0
-#define GTx512to1023Pkt_WIDTH 32
-#define GTx1024to15xxPkt_offset 0xD4
-#define GTx1024to15xxPkt_WIDTH 32
-#define GTx15xxtoJumboPkt_offset 0xD8
-#define GTx15xxtoJumboPkt_WIDTH 32
-#define GTxGtJumboPkt_offset 0xDC
-#define GTxGtJumboPkt_WIDTH 32
-#define GTxNonTcpUdpPkt_offset 0xE0
-#define GTxNonTcpUdpPkt_WIDTH 16
-#define GTxMacSrcErrPkt_offset 0xE4
-#define GTxMacSrcErrPkt_WIDTH 16
-#define GTxIpSrcErrPkt_offset 0xE8
-#define GTxIpSrcErrPkt_WIDTH 16
-#define GDmaDone_offset 0xEC
-#define GDmaDone_WIDTH 32
-
-#define XgRxOctets_offset 0x0
-#define XgRxOctets_WIDTH 48
-#define XgRxOctetsOK_offset 0x8
-#define XgRxOctetsOK_WIDTH 48
-#define XgRxPkts_offset 0x10
-#define XgRxPkts_WIDTH 32
-#define XgRxPktsOK_offset 0x14
-#define XgRxPktsOK_WIDTH 32
-#define XgRxBroadcastPkts_offset 0x18
-#define XgRxBroadcastPkts_WIDTH 32
-#define XgRxMulticastPkts_offset 0x1C
-#define XgRxMulticastPkts_WIDTH 32
-#define XgRxUnicastPkts_offset 0x20
-#define XgRxUnicastPkts_WIDTH 32
-#define XgRxUndersizePkts_offset 0x24
-#define XgRxUndersizePkts_WIDTH 32
-#define XgRxOversizePkts_offset 0x28
-#define XgRxOversizePkts_WIDTH 32
-#define XgRxJabberPkts_offset 0x2C
-#define XgRxJabberPkts_WIDTH 32
-#define XgRxUndersizeFCSerrorPkts_offset 0x30
-#define XgRxUndersizeFCSerrorPkts_WIDTH 32
-#define XgRxDropEvents_offset 0x34
-#define XgRxDropEvents_WIDTH 32
-#define XgRxFCSerrorPkts_offset 0x38
-#define XgRxFCSerrorPkts_WIDTH 32
-#define XgRxAlignError_offset 0x3C
-#define XgRxAlignError_WIDTH 32
-#define XgRxSymbolError_offset 0x40
-#define XgRxSymbolError_WIDTH 32
-#define XgRxInternalMACError_offset 0x44
-#define XgRxInternalMACError_WIDTH 32
-#define XgRxControlPkts_offset 0x48
-#define XgRxControlPkts_WIDTH 32
-#define XgRxPausePkts_offset 0x4C
-#define XgRxPausePkts_WIDTH 32
-#define XgRxPkts64Octets_offset 0x50
-#define XgRxPkts64Octets_WIDTH 32
-#define XgRxPkts65to127Octets_offset 0x54
-#define XgRxPkts65to127Octets_WIDTH 32
-#define XgRxPkts128to255Octets_offset 0x58
-#define XgRxPkts128to255Octets_WIDTH 32
-#define XgRxPkts256to511Octets_offset 0x5C
-#define XgRxPkts256to511Octets_WIDTH 32
-#define XgRxPkts512to1023Octets_offset 0x60
-#define XgRxPkts512to1023Octets_WIDTH 32
-#define XgRxPkts1024to15xxOctets_offset 0x64
-#define XgRxPkts1024to15xxOctets_WIDTH 32
-#define XgRxPkts15xxtoMaxOctets_offset 0x68
-#define XgRxPkts15xxtoMaxOctets_WIDTH 32
-#define XgRxLengthError_offset 0x6C
-#define XgRxLengthError_WIDTH 32
-#define XgTxPkts_offset 0x80
-#define XgTxPkts_WIDTH 32
-#define XgTxOctets_offset 0x88
-#define XgTxOctets_WIDTH 48
-#define XgTxMulticastPkts_offset 0x90
-#define XgTxMulticastPkts_WIDTH 32
-#define XgTxBroadcastPkts_offset 0x94
-#define XgTxBroadcastPkts_WIDTH 32
-#define XgTxUnicastPkts_offset 0x98
-#define XgTxUnicastPkts_WIDTH 32
-#define XgTxControlPkts_offset 0x9C
-#define XgTxControlPkts_WIDTH 32
-#define XgTxPausePkts_offset 0xA0
-#define XgTxPausePkts_WIDTH 32
-#define XgTxPkts64Octets_offset 0xA4
-#define XgTxPkts64Octets_WIDTH 32
-#define XgTxPkts65to127Octets_offset 0xA8
-#define XgTxPkts65to127Octets_WIDTH 32
-#define XgTxPkts128to255Octets_offset 0xAC
-#define XgTxPkts128to255Octets_WIDTH 32
-#define XgTxPkts256to511Octets_offset 0xB0
-#define XgTxPkts256to511Octets_WIDTH 32
-#define XgTxPkts512to1023Octets_offset 0xB4
-#define XgTxPkts512to1023Octets_WIDTH 32
-#define XgTxPkts1024to15xxOctets_offset 0xB8
-#define XgTxPkts1024to15xxOctets_WIDTH 32
-#define XgTxPkts1519toMaxOctets_offset 0xBC
-#define XgTxPkts1519toMaxOctets_WIDTH 32
-#define XgTxUndersizePkts_offset 0xC0
-#define XgTxUndersizePkts_WIDTH 32
-#define XgTxOversizePkts_offset 0xC4
-#define XgTxOversizePkts_WIDTH 32
-#define XgTxNonTcpUdpPkt_offset 0xC8
-#define XgTxNonTcpUdpPkt_WIDTH 16
-#define XgTxMacSrcErrPkt_offset 0xCC
-#define XgTxMacSrcErrPkt_WIDTH 16
-#define XgTxIpSrcErrPkt_offset 0xD0
-#define XgTxIpSrcErrPkt_WIDTH 16
-#define XgDmaDone_offset 0xD4
-
-#define FALCON_STATS_NOT_DONE 0x00000000
-#define FALCON_STATS_DONE 0xffffffff
-
-/* Interrupt status register bits */
-#define FATAL_INT_LBN 64
-#define FATAL_INT_WIDTH 1
-#define INT_EVQS_LBN 40
-#define INT_EVQS_WIDTH 4
-
-/**************************************************************************
- *
- * Falcon non-volatile configuration
- *
- **************************************************************************
- */
-
-/* Board configuration v2 (v1 is obsolete; later versions are compatible) */
-struct falcon_nvconfig_board_v2 {
-	__le16 nports;
-	u8 port0_phy_addr;
-	u8 port0_phy_type;
-	u8 port1_phy_addr;
-	u8 port1_phy_type;
-	__le16 asic_sub_revision;
-	__le16 board_revision;
-} __packed;
-
-/* Board configuration v3 extra information */
-struct falcon_nvconfig_board_v3 {
-	__le32 spi_device_type[2];
-} __packed;
-
-/* Bit numbers for spi_device_type */
-#define SPI_DEV_TYPE_SIZE_LBN 0
-#define SPI_DEV_TYPE_SIZE_WIDTH 5
-#define SPI_DEV_TYPE_ADDR_LEN_LBN 6
-#define SPI_DEV_TYPE_ADDR_LEN_WIDTH 2
-#define SPI_DEV_TYPE_ERASE_CMD_LBN 8
-#define SPI_DEV_TYPE_ERASE_CMD_WIDTH 8
-#define SPI_DEV_TYPE_ERASE_SIZE_LBN 16
-#define SPI_DEV_TYPE_ERASE_SIZE_WIDTH 5
-#define SPI_DEV_TYPE_BLOCK_SIZE_LBN 24
-#define SPI_DEV_TYPE_BLOCK_SIZE_WIDTH 5
-#define SPI_DEV_TYPE_FIELD(type, field)					\
-	(((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(EFX_WIDTH(field)))
-
-#define NVCONFIG_OFFSET 0x300
-
-#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
-struct falcon_nvconfig {
-	efx_oword_t ee_vpd_cfg_reg;			/* 0x300 */
-	u8 mac_address[2][8];			/* 0x310 */
-	efx_oword_t pcie_sd_ctl0123_reg;		/* 0x320 */
-	efx_oword_t pcie_sd_ctl45_reg;			/* 0x330 */
-	efx_oword_t pcie_pcs_ctl_stat_reg;		/* 0x340 */
-	efx_oword_t hw_init_reg;			/* 0x350 */
-	efx_oword_t nic_stat_reg;			/* 0x360 */
-	efx_oword_t glb_ctl_reg;			/* 0x370 */
-	efx_oword_t srm_cfg_reg;			/* 0x380 */
-	efx_oword_t spare_reg;				/* 0x390 */
-	__le16 board_magic_num;			/* 0x3A0 */
-	__le16 board_struct_ver;
-	__le16 board_checksum;
-	struct falcon_nvconfig_board_v2 board_v2;
-	efx_oword_t ee_base_page_reg;			/* 0x3B0 */
-	struct falcon_nvconfig_board_v3 board_v3;
-} __packed;
-
-#endif /* EFX_FALCON_HWDEFS_H */
diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h
deleted file mode 100644
index 8883092..0000000
--- a/drivers/net/sfc/falcon_io.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_FALCON_IO_H
-#define EFX_FALCON_IO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-/**************************************************************************
- *
- * Falcon hardware access
- *
- **************************************************************************
- *
- * Notes on locking strategy:
- *
- * Most Falcon registers require 16-byte (or 8-byte, for SRAM
- * registers) atomic writes which necessitates locking.
- * Under normal operation few writes to the Falcon BAR are made and these
- * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special
- * cased to allow 4-byte (hence lockless) accesses.
- *
- * It *is* safe to write to these 4-byte registers in the middle of an
- * access to an 8-byte or 16-byte register.  We therefore use a
- * spinlock to protect accesses to the larger registers, but no locks
- * for the 4-byte registers.
- *
- * A write barrier is needed to ensure that DW3 is written after DW0/1/2
- * due to the way the 16byte registers are "collected" in the Falcon BIU
- *
- * We also lock when carrying out reads, to ensure consistency of the
- * data (made possible since the BIU reads all 128 bits into a cache).
- * Reads are very rare, so this isn't a significant performance
- * impact.  (Most data transferred from NIC to host is DMAed directly
- * into host memory).
- *
- * I/O BAR access uses locks for both reads and writes (but is only provided
- * for testing purposes).
- */
-
-/* Special buffer descriptors (Falcon SRAM) */
-#define BUF_TBL_KER_A1 0x18000
-#define BUF_TBL_KER_B0 0x800000
-
-
-#if BITS_PER_LONG == 64
-#define FALCON_USE_QWORD_IO 1
-#endif
-
-#ifdef FALCON_USE_QWORD_IO
-static inline void _falcon_writeq(struct efx_nic *efx, __le64 value,
-				  unsigned int reg)
-{
-	__raw_writeq((__force u64)value, efx->membase + reg);
-}
-static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg)
-{
-	return (__force __le64)__raw_readq(efx->membase + reg);
-}
-#endif
-
-static inline void _falcon_writel(struct efx_nic *efx, __le32 value,
-				  unsigned int reg)
-{
-	__raw_writel((__force u32)value, efx->membase + reg);
-}
-static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg)
-{
-	return (__force __le32)__raw_readl(efx->membase + reg);
-}
-
-/* Writes to a normal 16-byte Falcon register, locking as appropriate. */
-static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
-				unsigned int reg)
-{
-	unsigned long flags;
-
-	EFX_REGDUMP(efx, "writing register %x with " EFX_OWORD_FMT "\n", reg,
-		    EFX_OWORD_VAL(*value));
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-#ifdef FALCON_USE_QWORD_IO
-	_falcon_writeq(efx, value->u64[0], reg + 0);
-	wmb();
-	_falcon_writeq(efx, value->u64[1], reg + 8);
-#else
-	_falcon_writel(efx, value->u32[0], reg + 0);
-	_falcon_writel(efx, value->u32[1], reg + 4);
-	_falcon_writel(efx, value->u32[2], reg + 8);
-	wmb();
-	_falcon_writel(efx, value->u32[3], reg + 12);
-#endif
-	mmiowb();
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-}
-
-/* Writes to an 8-byte Falcon SRAM register, locking as appropriate. */
-static inline void falcon_write_sram(struct efx_nic *efx, efx_qword_t *value,
-				     unsigned int index)
-{
-	unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value));
-	unsigned long flags;
-
-	EFX_REGDUMP(efx, "writing SRAM register %x with " EFX_QWORD_FMT "\n",
-		    reg, EFX_QWORD_VAL(*value));
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-#ifdef FALCON_USE_QWORD_IO
-	_falcon_writeq(efx, value->u64[0], reg + 0);
-#else
-	_falcon_writel(efx, value->u32[0], reg + 0);
-	wmb();
-	_falcon_writel(efx, value->u32[1], reg + 4);
-#endif
-	mmiowb();
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-}
-
-/* Write dword to Falcon register that allows partial writes
- *
- * Some Falcon registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and
- * TX_DESC_UPD_REG) can be written to as a single dword.  This allows
- * for lockless writes.
- */
-static inline void falcon_writel(struct efx_nic *efx, efx_dword_t *value,
-				 unsigned int reg)
-{
-	EFX_REGDUMP(efx, "writing partial register %x with "EFX_DWORD_FMT"\n",
-		    reg, EFX_DWORD_VAL(*value));
-
-	/* No lock required */
-	_falcon_writel(efx, value->u32[0], reg);
-}
-
-/* Read from a Falcon register
- *
- * This reads an entire 16-byte Falcon register in one go, locking as
- * appropriate.  It is essential to read the first dword first, as this
- * prompts Falcon to load the current value into the shadow register.
- */
-static inline void falcon_read(struct efx_nic *efx, efx_oword_t *value,
-			       unsigned int reg)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-	value->u32[0] = _falcon_readl(efx, reg + 0);
-	rmb();
-	value->u32[1] = _falcon_readl(efx, reg + 4);
-	value->u32[2] = _falcon_readl(efx, reg + 8);
-	value->u32[3] = _falcon_readl(efx, reg + 12);
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-
-	EFX_REGDUMP(efx, "read from register %x, got " EFX_OWORD_FMT "\n", reg,
-		    EFX_OWORD_VAL(*value));
-}
-
-/* This reads an 8-byte Falcon SRAM entry in one go. */
-static inline void falcon_read_sram(struct efx_nic *efx, efx_qword_t *value,
-				    unsigned int index)
-{
-	unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value));
-	unsigned long flags;
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-#ifdef FALCON_USE_QWORD_IO
-	value->u64[0] = _falcon_readq(efx, reg + 0);
-#else
-	value->u32[0] = _falcon_readl(efx, reg + 0);
-	rmb();
-	value->u32[1] = _falcon_readl(efx, reg + 4);
-#endif
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-
-	EFX_REGDUMP(efx, "read from SRAM register %x, got "EFX_QWORD_FMT"\n",
-		    reg, EFX_QWORD_VAL(*value));
-}
-
-/* Read dword from Falcon register that allows partial writes (sic) */
-static inline void falcon_readl(struct efx_nic *efx, efx_dword_t *value,
-				unsigned int reg)
-{
-	value->u32[0] = _falcon_readl(efx, reg);
-	EFX_REGDUMP(efx, "read from register %x, got "EFX_DWORD_FMT"\n",
-		    reg, EFX_DWORD_VAL(*value));
-}
-
-/* Write to a register forming part of a table */
-static inline void falcon_write_table(struct efx_nic *efx, efx_oword_t *value,
-				      unsigned int reg, unsigned int index)
-{
-	falcon_write(efx, value, reg + index * sizeof(efx_oword_t));
-}
-
-/* Read to a register forming part of a table */
-static inline void falcon_read_table(struct efx_nic *efx, efx_oword_t *value,
-				     unsigned int reg, unsigned int index)
-{
-	falcon_read(efx, value, reg + index * sizeof(efx_oword_t));
-}
-
-/* Write to a dword register forming part of a table */
-static inline void falcon_writel_table(struct efx_nic *efx, efx_dword_t *value,
-				       unsigned int reg, unsigned int index)
-{
-	falcon_writel(efx, value, reg + index * sizeof(efx_oword_t));
-}
-
-/* Page-mapped register block size */
-#define FALCON_PAGE_BLOCK_SIZE 0x2000
-
-/* Calculate offset to page-mapped register block */
-#define FALCON_PAGED_REG(page, reg) \
-	((page) * FALCON_PAGE_BLOCK_SIZE + (reg))
-
-/* As for falcon_write(), but for a page-mapped register. */
-static inline void falcon_write_page(struct efx_nic *efx, efx_oword_t *value,
-				     unsigned int reg, unsigned int page)
-{
-	falcon_write(efx, value, FALCON_PAGED_REG(page, reg));
-}
-
-/* As for falcon_writel(), but for a page-mapped register. */
-static inline void falcon_writel_page(struct efx_nic *efx, efx_dword_t *value,
-				      unsigned int reg, unsigned int page)
-{
-	falcon_writel(efx, value, FALCON_PAGED_REG(page, reg));
-}
-
-/* Write dword to Falcon page-mapped register with an extra lock.
- *
- * As for falcon_writel_page(), but for a register that suffers from
- * SFC bug 3181.  If writing to page 0, take out a lock so the BIU
- * collector cannot be confused.
- */
-static inline void falcon_writel_page_locked(struct efx_nic *efx,
-					     efx_dword_t *value,
-					     unsigned int reg,
-					     unsigned int page)
-{
-	unsigned long flags = 0;
-
-	if (page == 0)
-		spin_lock_irqsave(&efx->biu_lock, flags);
-	falcon_writel(efx, value, FALCON_PAGED_REG(page, reg));
-	if (page == 0)
-		spin_unlock_irqrestore(&efx->biu_lock, flags);
-}
-
-#endif /* EFX_FALCON_IO_H */
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index bec52ca..3da933f 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -11,13 +11,12 @@
 #include <linux/delay.h>
 #include "net_driver.h"
 #include "efx.h"
-#include "falcon.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
+#include "nic.h"
+#include "regs.h"
+#include "io.h"
 #include "mac.h"
 #include "mdio_10g.h"
 #include "phy.h"
-#include "boards.h"
 #include "workarounds.h"
 
 /**************************************************************************
@@ -36,43 +35,47 @@
 	if (efx->phy_type == PHY_TYPE_NONE)
 		return;
 
-	falcon_read(efx, &sdctl, XX_SD_CTL_REG);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVD, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVD, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVC, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVC, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVB, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVB, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVA, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVA, XX_SD_CTL_DRV_DEFAULT);
-	falcon_write(efx, &sdctl, XX_SD_CTL_REG);
+	efx_reado(efx, &sdctl, FR_AB_XX_SD_CTL);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVD, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVD, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVC, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVC, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVB, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVB, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVA, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVA, FFE_AB_XX_SD_CTL_DRV_DEF);
+	efx_writeo(efx, &sdctl, FR_AB_XX_SD_CTL);
 
 	EFX_POPULATE_OWORD_8(txdrv,
-			     XX_DEQD, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DEQC, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DEQB, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DEQA, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DTXD, XX_TXDRV_DTX_DEFAULT,
-			     XX_DTXC, XX_TXDRV_DTX_DEFAULT,
-			     XX_DTXB, XX_TXDRV_DTX_DEFAULT,
-			     XX_DTXA, XX_TXDRV_DTX_DEFAULT);
-	falcon_write(efx, &txdrv, XX_TXDRV_CTL_REG);
+			     FRF_AB_XX_DEQD, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DEQC, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DEQB, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DEQA, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DTXD, FFE_AB_XX_TXDRV_DTX_DEF,
+			     FRF_AB_XX_DTXC, FFE_AB_XX_TXDRV_DTX_DEF,
+			     FRF_AB_XX_DTXB, FFE_AB_XX_TXDRV_DTX_DEF,
+			     FRF_AB_XX_DTXA, FFE_AB_XX_TXDRV_DTX_DEF);
+	efx_writeo(efx, &txdrv, FR_AB_XX_TXDRV_CTL);
 }
 
 int falcon_reset_xaui(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t reg;
 	int count;
 
+	/* Don't fetch MAC statistics over an XMAC reset */
+	WARN_ON(nic_data->stats_disable_count == 0);
+
 	/* Start reset sequence */
-	EFX_POPULATE_DWORD_1(reg, XX_RST_XX_EN, 1);
-	falcon_write(efx, &reg, XX_PWR_RST_REG);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_XX_RST_XX_EN, 1);
+	efx_writeo(efx, &reg, FR_AB_XX_PWR_RST);
 
 	/* Wait up to 10 ms for completion, then reinitialise */
 	for (count = 0; count < 1000; count++) {
-		falcon_read(efx, &reg, XX_PWR_RST_REG);
-		if (EFX_OWORD_FIELD(reg, XX_RST_XX_EN) == 0 &&
-		    EFX_OWORD_FIELD(reg, XX_SD_RST_ACT) == 0) {
+		efx_reado(efx, &reg, FR_AB_XX_PWR_RST);
+		if (EFX_OWORD_FIELD(reg, FRF_AB_XX_RST_XX_EN) == 0 &&
+		    EFX_OWORD_FIELD(reg, FRF_AB_XX_SD_RST_ACT) == 0) {
 			falcon_setup_xaui(efx);
 			return 0;
 		}
@@ -86,30 +89,30 @@
 {
 	efx_oword_t reg;
 
-	if ((falcon_rev(efx) != FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
+	if ((efx_nic_rev(efx) != EFX_REV_FALCON_B0) || LOOPBACK_INTERNAL(efx))
 		return;
 
 	/* We expect xgmii faults if the wireside link is up */
-	if (!EFX_WORKAROUND_5147(efx) || !efx->link_up)
+	if (!EFX_WORKAROUND_5147(efx) || !efx->link_state.up)
 		return;
 
 	/* We can only use this interrupt to signal the negative edge of
 	 * xaui_align [we have to poll the positive edge]. */
-	if (!efx->mac_up)
+	if (efx->xmac_poll_required)
 		return;
 
 	/* Flush the ISR */
 	if (enable)
-		falcon_read(efx, &reg, XM_MGT_INT_REG_B0);
+		efx_reado(efx, &reg, FR_AB_XM_MGT_INT_MSK);
 
 	EFX_POPULATE_OWORD_2(reg,
-			     XM_MSK_RMTFLT, !enable,
-			     XM_MSK_LCLFLT, !enable);
-	falcon_write(efx, &reg, XM_MGT_INT_MSK_REG_B0);
+			     FRF_AB_XM_MSK_RMTFLT, !enable,
+			     FRF_AB_XM_MSK_LCLFLT, !enable);
+	efx_writeo(efx, &reg, FR_AB_XM_MGT_INT_MASK);
 }
 
 /* Get status of XAUI link */
-bool falcon_xaui_link_ok(struct efx_nic *efx)
+static bool falcon_xaui_link_ok(struct efx_nic *efx)
 {
 	efx_oword_t reg;
 	bool align_done, link_ok = false;
@@ -119,84 +122,79 @@
 		return true;
 
 	/* Read link status */
-	falcon_read(efx, &reg, XX_CORE_STAT_REG);
+	efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
 
-	align_done = EFX_OWORD_FIELD(reg, XX_ALIGN_DONE);
-	sync_status = EFX_OWORD_FIELD(reg, XX_SYNC_STAT);
-	if (align_done && (sync_status == XX_SYNC_STAT_DECODE_SYNCED))
+	align_done = EFX_OWORD_FIELD(reg, FRF_AB_XX_ALIGN_DONE);
+	sync_status = EFX_OWORD_FIELD(reg, FRF_AB_XX_SYNC_STAT);
+	if (align_done && (sync_status == FFE_AB_XX_STAT_ALL_LANES))
 		link_ok = true;
 
 	/* Clear link status ready for next read */
-	EFX_SET_OWORD_FIELD(reg, XX_COMMA_DET, XX_COMMA_DET_RESET);
-	EFX_SET_OWORD_FIELD(reg, XX_CHARERR, XX_CHARERR_RESET);
-	EFX_SET_OWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET);
-	falcon_write(efx, &reg, XX_CORE_STAT_REG);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_COMMA_DET, FFE_AB_XX_STAT_ALL_LANES);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_CHAR_ERR, FFE_AB_XX_STAT_ALL_LANES);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES);
+	efx_writeo(efx, &reg, FR_AB_XX_CORE_STAT);
 
 	/* If the link is up, then check the phy side of the xaui link */
-	if (efx->link_up && link_ok)
-		if (efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS))
+	if (efx->link_state.up && link_ok)
+		if (efx->mdio.mmds & (1 << MDIO_MMD_PHYXS))
 			link_ok = efx_mdio_phyxgxs_lane_sync(efx);
 
 	return link_ok;
 }
 
-static void falcon_reconfigure_xmac_core(struct efx_nic *efx)
+void falcon_reconfigure_xmac_core(struct efx_nic *efx)
 {
 	unsigned int max_frame_len;
 	efx_oword_t reg;
-	bool rx_fc = !!(efx->link_fc & EFX_FC_RX);
+	bool rx_fc = !!(efx->link_state.fc & EFX_FC_RX);
+	bool tx_fc = !!(efx->link_state.fc & EFX_FC_TX);
 
 	/* Configure MAC  - cut-thru mode is hard wired on */
-	EFX_POPULATE_DWORD_3(reg,
-			     XM_RX_JUMBO_MODE, 1,
-			     XM_TX_STAT_EN, 1,
-			     XM_RX_STAT_EN, 1);
-	falcon_write(efx, &reg, XM_GLB_CFG_REG);
+	EFX_POPULATE_OWORD_3(reg,
+			     FRF_AB_XM_RX_JUMBO_MODE, 1,
+			     FRF_AB_XM_TX_STAT_EN, 1,
+			     FRF_AB_XM_RX_STAT_EN, 1);
+	efx_writeo(efx, &reg, FR_AB_XM_GLB_CFG);
 
 	/* Configure TX */
-	EFX_POPULATE_DWORD_6(reg,
-			     XM_TXEN, 1,
-			     XM_TX_PRMBL, 1,
-			     XM_AUTO_PAD, 1,
-			     XM_TXCRC, 1,
-			     XM_FCNTL, 1,
-			     XM_IPG, 0x3);
-	falcon_write(efx, &reg, XM_TX_CFG_REG);
+	EFX_POPULATE_OWORD_6(reg,
+			     FRF_AB_XM_TXEN, 1,
+			     FRF_AB_XM_TX_PRMBL, 1,
+			     FRF_AB_XM_AUTO_PAD, 1,
+			     FRF_AB_XM_TXCRC, 1,
+			     FRF_AB_XM_FCNTL, tx_fc,
+			     FRF_AB_XM_IPG, 0x3);
+	efx_writeo(efx, &reg, FR_AB_XM_TX_CFG);
 
 	/* Configure RX */
-	EFX_POPULATE_DWORD_5(reg,
-			     XM_RXEN, 1,
-			     XM_AUTO_DEPAD, 0,
-			     XM_ACPT_ALL_MCAST, 1,
-			     XM_ACPT_ALL_UCAST, efx->promiscuous,
-			     XM_PASS_CRC_ERR, 1);
-	falcon_write(efx, &reg, XM_RX_CFG_REG);
+	EFX_POPULATE_OWORD_5(reg,
+			     FRF_AB_XM_RXEN, 1,
+			     FRF_AB_XM_AUTO_DEPAD, 0,
+			     FRF_AB_XM_ACPT_ALL_MCAST, 1,
+			     FRF_AB_XM_ACPT_ALL_UCAST, efx->promiscuous,
+			     FRF_AB_XM_PASS_CRC_ERR, 1);
+	efx_writeo(efx, &reg, FR_AB_XM_RX_CFG);
 
 	/* Set frame length */
 	max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu);
-	EFX_POPULATE_DWORD_1(reg, XM_MAX_RX_FRM_SIZE, max_frame_len);
-	falcon_write(efx, &reg, XM_RX_PARAM_REG);
-	EFX_POPULATE_DWORD_2(reg,
-			     XM_MAX_TX_FRM_SIZE, max_frame_len,
-			     XM_TX_JUMBO_MODE, 1);
-	falcon_write(efx, &reg, XM_TX_PARAM_REG);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_MAX_RX_FRM_SIZE, max_frame_len);
+	efx_writeo(efx, &reg, FR_AB_XM_RX_PARAM);
+	EFX_POPULATE_OWORD_2(reg,
+			     FRF_AB_XM_MAX_TX_FRM_SIZE, max_frame_len,
+			     FRF_AB_XM_TX_JUMBO_MODE, 1);
+	efx_writeo(efx, &reg, FR_AB_XM_TX_PARAM);
 
-	EFX_POPULATE_DWORD_2(reg,
-			     XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */
-			     XM_DIS_FCNTL, !rx_fc);
-	falcon_write(efx, &reg, XM_FC_REG);
+	EFX_POPULATE_OWORD_2(reg,
+			     FRF_AB_XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */
+			     FRF_AB_XM_DIS_FCNTL, !rx_fc);
+	efx_writeo(efx, &reg, FR_AB_XM_FC);
 
 	/* Set MAC address */
-	EFX_POPULATE_DWORD_4(reg,
-			     XM_ADR_0, efx->net_dev->dev_addr[0],
-			     XM_ADR_1, efx->net_dev->dev_addr[1],
-			     XM_ADR_2, efx->net_dev->dev_addr[2],
-			     XM_ADR_3, efx->net_dev->dev_addr[3]);
-	falcon_write(efx, &reg, XM_ADR_LO_REG);
-	EFX_POPULATE_DWORD_2(reg,
-			     XM_ADR_4, efx->net_dev->dev_addr[4],
-			     XM_ADR_5, efx->net_dev->dev_addr[5]);
-	falcon_write(efx, &reg, XM_ADR_HI_REG);
+	memcpy(&reg, &efx->net_dev->dev_addr[0], 4);
+	efx_writeo(efx, &reg, FR_AB_XM_ADR_LO);
+	memcpy(&reg, &efx->net_dev->dev_addr[4], 2);
+	efx_writeo(efx, &reg, FR_AB_XM_ADR_HI);
 }
 
 static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
@@ -212,12 +210,13 @@
 		bool old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback;
 		bool reset_xgxs;
 
-		falcon_read(efx, &reg, XX_CORE_STAT_REG);
-		old_xgxs_loopback = EFX_OWORD_FIELD(reg, XX_XGXS_LB_EN);
-		old_xgmii_loopback = EFX_OWORD_FIELD(reg, XX_XGMII_LB_EN);
+		efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
+		old_xgxs_loopback = EFX_OWORD_FIELD(reg, FRF_AB_XX_XGXS_LB_EN);
+		old_xgmii_loopback =
+			EFX_OWORD_FIELD(reg, FRF_AB_XX_XGMII_LB_EN);
 
-		falcon_read(efx, &reg, XX_SD_CTL_REG);
-		old_xaui_loopback = EFX_OWORD_FIELD(reg, XX_LPBKA);
+		efx_reado(efx, &reg, FR_AB_XX_SD_CTL);
+		old_xaui_loopback = EFX_OWORD_FIELD(reg, FRF_AB_XX_LPBKA);
 
 		/* The PHY driver may have turned XAUI off */
 		reset_xgxs = ((xgxs_loopback != old_xgxs_loopback) ||
@@ -228,45 +227,55 @@
 			falcon_reset_xaui(efx);
 	}
 
-	falcon_read(efx, &reg, XX_CORE_STAT_REG);
-	EFX_SET_OWORD_FIELD(reg, XX_FORCE_SIG,
+	efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_FORCE_SIG,
 			    (xgxs_loopback || xaui_loopback) ?
-			    XX_FORCE_SIG_DECODE_FORCED : 0);
-	EFX_SET_OWORD_FIELD(reg, XX_XGXS_LB_EN, xgxs_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_XGMII_LB_EN, xgmii_loopback);
-	falcon_write(efx, &reg, XX_CORE_STAT_REG);
+			    FFE_AB_XX_FORCE_SIG_ALL_LANES : 0);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_XGXS_LB_EN, xgxs_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_XGMII_LB_EN, xgmii_loopback);
+	efx_writeo(efx, &reg, FR_AB_XX_CORE_STAT);
 
-	falcon_read(efx, &reg, XX_SD_CTL_REG);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKD, xaui_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKC, xaui_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKB, xaui_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKA, xaui_loopback);
-	falcon_write(efx, &reg, XX_SD_CTL_REG);
+	efx_reado(efx, &reg, FR_AB_XX_SD_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKD, xaui_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKC, xaui_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKB, xaui_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKA, xaui_loopback);
+	efx_writeo(efx, &reg, FR_AB_XX_SD_CTL);
 }
 
 
-/* Try and bring the Falcon side of the Falcon-Phy XAUI link fails
- * to come back up. Bash it until it comes back up */
-static void falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
+/* Try to bring up the Falcon side of the Falcon-Phy XAUI link */
+static bool falcon_check_xaui_link_up(struct efx_nic *efx, int tries)
 {
-	efx->mac_up = falcon_xaui_link_ok(efx);
+	bool mac_up = falcon_xaui_link_ok(efx);
 
-	if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
+	if (LOOPBACK_MASK(efx) & LOOPBACKS_EXTERNAL(efx) & LOOPBACKS_WS ||
 	    efx_phy_mode_disabled(efx->phy_mode))
 		/* XAUI link is expected to be down */
-		return;
+		return mac_up;
 
-	while (!efx->mac_up && tries) {
+	falcon_stop_nic_stats(efx);
+
+	while (!mac_up && tries) {
 		EFX_LOG(efx, "bashing xaui\n");
 		falcon_reset_xaui(efx);
 		udelay(200);
 
-		efx->mac_up = falcon_xaui_link_ok(efx);
+		mac_up = falcon_xaui_link_ok(efx);
 		--tries;
 	}
+
+	falcon_start_nic_stats(efx);
+
+	return mac_up;
 }
 
-static void falcon_reconfigure_xmac(struct efx_nic *efx)
+static bool falcon_xmac_check_fault(struct efx_nic *efx)
+{
+	return !falcon_check_xaui_link_up(efx, 5);
+}
+
+static int falcon_reconfigure_xmac(struct efx_nic *efx)
 {
 	falcon_mask_status_intr(efx, false);
 
@@ -275,18 +284,15 @@
 
 	falcon_reconfigure_mac_wrapper(efx);
 
-	falcon_check_xaui_link_up(efx, 5);
+	efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 5);
 	falcon_mask_status_intr(efx, true);
+
+	return 0;
 }
 
 static void falcon_update_stats_xmac(struct efx_nic *efx)
 {
 	struct efx_mac_stats *mac_stats = &efx->mac_stats;
-	int rc;
-
-	rc = falcon_dma_stats(efx, XgDmaDone_offset);
-	if (rc)
-		return;
 
 	/* Update MAC stats from DMAed values */
 	FALCON_STAT(efx, XgRxOctets, rx_bytes);
@@ -344,35 +350,19 @@
 		 mac_stats->rx_control * 64);
 }
 
-static void falcon_xmac_irq(struct efx_nic *efx)
+void falcon_poll_xmac(struct efx_nic *efx)
 {
-	/* The XGMII link has a transient fault, which indicates either:
-	 *   - there's a transient xgmii fault
-	 *   - falcon's end of the xaui link may need a kick
-	 *   - the wire-side link may have gone down, but the lasi/poll()
-	 *     hasn't noticed yet.
-	 *
-	 * We only want to even bother polling XAUI if we're confident it's
-	 * not (1) or (3). In both cases, the only reliable way to spot this
-	 * is to wait a bit. We do this here by forcing the mac link state
-	 * to down, and waiting for the mac poll to come round and check
-	 */
-	efx->mac_up = false;
-}
-
-static void falcon_poll_xmac(struct efx_nic *efx)
-{
-	if (!EFX_WORKAROUND_5147(efx) || !efx->link_up || efx->mac_up)
+	if (!EFX_WORKAROUND_5147(efx) || !efx->link_state.up ||
+	    !efx->xmac_poll_required)
 		return;
 
 	falcon_mask_status_intr(efx, false);
-	falcon_check_xaui_link_up(efx, 1);
+	efx->xmac_poll_required = !falcon_check_xaui_link_up(efx, 1);
 	falcon_mask_status_intr(efx, true);
 }
 
 struct efx_mac_operations falcon_xmac_operations = {
 	.reconfigure	= falcon_reconfigure_xmac,
 	.update_stats	= falcon_update_stats_xmac,
-	.irq		= falcon_xmac_irq,
-	.poll		= falcon_poll_xmac,
+	.check_fault	= falcon_xmac_check_fault,
 };
diff --git a/drivers/net/sfc/gmii.h b/drivers/net/sfc/gmii.h
deleted file mode 100644
index dfccaa7..0000000
--- a/drivers/net/sfc/gmii.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_GMII_H
-#define EFX_GMII_H
-
-/*
- * GMII interface
- */
-
-#include <linux/mii.h>
-
-/* GMII registers, excluding registers already defined as MII
- * registers in mii.h
- */
-#define GMII_IER		0x12	/* Interrupt enable register */
-#define GMII_ISR		0x13	/* Interrupt status register */
-
-/* Interrupt enable register */
-#define IER_ANEG_ERR		0x8000	/* Bit 15 - autonegotiation error */
-#define IER_SPEED_CHG		0x4000	/* Bit 14 - speed changed */
-#define IER_DUPLEX_CHG		0x2000	/* Bit 13 - duplex changed */
-#define IER_PAGE_RCVD		0x1000	/* Bit 12 - page received */
-#define IER_ANEG_DONE		0x0800	/* Bit 11 - autonegotiation complete */
-#define IER_LINK_CHG		0x0400	/* Bit 10 - link status changed */
-#define IER_SYM_ERR		0x0200	/* Bit 9 - symbol error */
-#define IER_FALSE_CARRIER	0x0100	/* Bit 8 - false carrier */
-#define IER_FIFO_ERR		0x0080	/* Bit 7 - FIFO over/underflow */
-#define IER_MDIX_CHG		0x0040	/* Bit 6 - MDI crossover changed */
-#define IER_DOWNSHIFT		0x0020	/* Bit 5 - downshift */
-#define IER_ENERGY		0x0010	/* Bit 4 - energy detect */
-#define IER_DTE_POWER		0x0004	/* Bit 2 - DTE power detect */
-#define IER_POLARITY_CHG	0x0002	/* Bit 1 - polarity changed */
-#define IER_JABBER		0x0001	/* Bit 0 - jabber */
-
-/* Interrupt status register */
-#define ISR_ANEG_ERR		0x8000	/* Bit 15 - autonegotiation error */
-#define ISR_SPEED_CHG		0x4000	/* Bit 14 - speed changed */
-#define ISR_DUPLEX_CHG		0x2000	/* Bit 13 - duplex changed */
-#define ISR_PAGE_RCVD		0x1000	/* Bit 12 - page received */
-#define ISR_ANEG_DONE		0x0800	/* Bit 11 - autonegotiation complete */
-#define ISR_LINK_CHG		0x0400	/* Bit 10 - link status changed */
-#define ISR_SYM_ERR		0x0200	/* Bit 9 - symbol error */
-#define ISR_FALSE_CARRIER	0x0100	/* Bit 8 - false carrier */
-#define ISR_FIFO_ERR		0x0080	/* Bit 7 - FIFO over/underflow */
-#define ISR_MDIX_CHG		0x0040	/* Bit 6 - MDI crossover changed */
-#define ISR_DOWNSHIFT		0x0020	/* Bit 5 - downshift */
-#define ISR_ENERGY		0x0010	/* Bit 4 - energy detect */
-#define ISR_DTE_POWER		0x0004	/* Bit 2 - DTE power detect */
-#define ISR_POLARITY_CHG	0x0002	/* Bit 1 - polarity changed */
-#define ISR_JABBER		0x0001	/* Bit 0 - jabber */
-
-#endif /* EFX_GMII_H */
diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h
new file mode 100644
index 0000000..b89177c
--- /dev/null
+++ b/drivers/net/sfc/io.h
@@ -0,0 +1,256 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_IO_H
+#define EFX_IO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+/**************************************************************************
+ *
+ * NIC register I/O
+ *
+ **************************************************************************
+ *
+ * Notes on locking strategy:
+ *
+ * Most NIC registers require 16-byte (or 8-byte, for SRAM) atomic writes
+ * which necessitates locking.
+ * Under normal operation few writes to NIC registers are made and these
+ * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special
+ * cased to allow 4-byte (hence lockless) accesses.
+ *
+ * It *is* safe to write to these 4-byte registers in the middle of an
+ * access to an 8-byte or 16-byte register.  We therefore use a
+ * spinlock to protect accesses to the larger registers, but no locks
+ * for the 4-byte registers.
+ *
+ * A write barrier is needed to ensure that DW3 is written after DW0/1/2
+ * due to the way the 16byte registers are "collected" in the BIU.
+ *
+ * We also lock when carrying out reads, to ensure consistency of the
+ * data (made possible since the BIU reads all 128 bits into a cache).
+ * Reads are very rare, so this isn't a significant performance
+ * impact.  (Most data transferred from NIC to host is DMAed directly
+ * into host memory).
+ *
+ * I/O BAR access uses locks for both reads and writes (but is only provided
+ * for testing purposes).
+ */
+
+#if BITS_PER_LONG == 64
+#define EFX_USE_QWORD_IO 1
+#endif
+
+#ifdef EFX_USE_QWORD_IO
+static inline void _efx_writeq(struct efx_nic *efx, __le64 value,
+				  unsigned int reg)
+{
+	__raw_writeq((__force u64)value, efx->membase + reg);
+}
+static inline __le64 _efx_readq(struct efx_nic *efx, unsigned int reg)
+{
+	return (__force __le64)__raw_readq(efx->membase + reg);
+}
+#endif
+
+static inline void _efx_writed(struct efx_nic *efx, __le32 value,
+				  unsigned int reg)
+{
+	__raw_writel((__force u32)value, efx->membase + reg);
+}
+static inline __le32 _efx_readd(struct efx_nic *efx, unsigned int reg)
+{
+	return (__force __le32)__raw_readl(efx->membase + reg);
+}
+
+/* Writes to a normal 16-byte Efx register, locking as appropriate. */
+static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value,
+			      unsigned int reg)
+{
+	unsigned long flags __attribute__ ((unused));
+
+	EFX_REGDUMP(efx, "writing register %x with " EFX_OWORD_FMT "\n", reg,
+		    EFX_OWORD_VAL(*value));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef EFX_USE_QWORD_IO
+	_efx_writeq(efx, value->u64[0], reg + 0);
+	wmb();
+	_efx_writeq(efx, value->u64[1], reg + 8);
+#else
+	_efx_writed(efx, value->u32[0], reg + 0);
+	_efx_writed(efx, value->u32[1], reg + 4);
+	_efx_writed(efx, value->u32[2], reg + 8);
+	wmb();
+	_efx_writed(efx, value->u32[3], reg + 12);
+#endif
+	mmiowb();
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+/* Write an 8-byte NIC SRAM entry through the supplied mapping,
+ * locking as appropriate. */
+static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase,
+				   efx_qword_t *value, unsigned int index)
+{
+	unsigned int addr = index * sizeof(*value);
+	unsigned long flags __attribute__ ((unused));
+
+	EFX_REGDUMP(efx, "writing SRAM address %x with " EFX_QWORD_FMT "\n",
+		    addr, EFX_QWORD_VAL(*value));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef EFX_USE_QWORD_IO
+	__raw_writeq((__force u64)value->u64[0], membase + addr);
+#else
+	__raw_writel((__force u32)value->u32[0], membase + addr);
+	wmb();
+	__raw_writel((__force u32)value->u32[1], membase + addr + 4);
+#endif
+	mmiowb();
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+/* Write dword to NIC register that allows partial writes
+ *
+ * Some registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and
+ * TX_DESC_UPD_REG) can be written to as a single dword.  This allows
+ * for lockless writes.
+ */
+static inline void efx_writed(struct efx_nic *efx, efx_dword_t *value,
+			      unsigned int reg)
+{
+	EFX_REGDUMP(efx, "writing partial register %x with "EFX_DWORD_FMT"\n",
+		    reg, EFX_DWORD_VAL(*value));
+
+	/* No lock required */
+	_efx_writed(efx, value->u32[0], reg);
+}
+
+/* Read from a NIC register
+ *
+ * This reads an entire 16-byte register in one go, locking as
+ * appropriate.  It is essential to read the first dword first, as this
+ * prompts the NIC to load the current value into the shadow register.
+ */
+static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
+			     unsigned int reg)
+{
+	unsigned long flags __attribute__ ((unused));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+	value->u32[0] = _efx_readd(efx, reg + 0);
+	rmb();
+	value->u32[1] = _efx_readd(efx, reg + 4);
+	value->u32[2] = _efx_readd(efx, reg + 8);
+	value->u32[3] = _efx_readd(efx, reg + 12);
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+
+	EFX_REGDUMP(efx, "read from register %x, got " EFX_OWORD_FMT "\n", reg,
+		    EFX_OWORD_VAL(*value));
+}
+
+/* Read an 8-byte SRAM entry through supplied mapping,
+ * locking as appropriate. */
+static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
+				  efx_qword_t *value, unsigned int index)
+{
+	unsigned int addr = index * sizeof(*value);
+	unsigned long flags __attribute__ ((unused));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef EFX_USE_QWORD_IO
+	value->u64[0] = (__force __le64)__raw_readq(membase + addr);
+#else
+	value->u32[0] = (__force __le32)__raw_readl(membase + addr);
+	rmb();
+	value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
+#endif
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+
+	EFX_REGDUMP(efx, "read from SRAM address %x, got "EFX_QWORD_FMT"\n",
+		    addr, EFX_QWORD_VAL(*value));
+}
+
+/* Read dword from register that allows partial writes (sic) */
+static inline void efx_readd(struct efx_nic *efx, efx_dword_t *value,
+				unsigned int reg)
+{
+	value->u32[0] = _efx_readd(efx, reg);
+	EFX_REGDUMP(efx, "read from register %x, got "EFX_DWORD_FMT"\n",
+		    reg, EFX_DWORD_VAL(*value));
+}
+
+/* Write to a register forming part of a table */
+static inline void efx_writeo_table(struct efx_nic *efx, efx_oword_t *value,
+				      unsigned int reg, unsigned int index)
+{
+	efx_writeo(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Read to a register forming part of a table */
+static inline void efx_reado_table(struct efx_nic *efx, efx_oword_t *value,
+				     unsigned int reg, unsigned int index)
+{
+	efx_reado(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Write to a dword register forming part of a table */
+static inline void efx_writed_table(struct efx_nic *efx, efx_dword_t *value,
+				       unsigned int reg, unsigned int index)
+{
+	efx_writed(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Page-mapped register block size */
+#define EFX_PAGE_BLOCK_SIZE 0x2000
+
+/* Calculate offset to page-mapped register block */
+#define EFX_PAGED_REG(page, reg) \
+	((page) * EFX_PAGE_BLOCK_SIZE + (reg))
+
+/* As for efx_writeo(), but for a page-mapped register. */
+static inline void efx_writeo_page(struct efx_nic *efx, efx_oword_t *value,
+				   unsigned int reg, unsigned int page)
+{
+	efx_writeo(efx, value, EFX_PAGED_REG(page, reg));
+}
+
+/* As for efx_writed(), but for a page-mapped register. */
+static inline void efx_writed_page(struct efx_nic *efx, efx_dword_t *value,
+				   unsigned int reg, unsigned int page)
+{
+	efx_writed(efx, value, EFX_PAGED_REG(page, reg));
+}
+
+/* Write dword to page-mapped register with an extra lock.
+ *
+ * As for efx_writed_page(), but for a register that suffers from
+ * SFC bug 3181. Take out a lock so the BIU collector cannot be
+ * confused. */
+static inline void efx_writed_page_locked(struct efx_nic *efx,
+					  efx_dword_t *value,
+					  unsigned int reg,
+					  unsigned int page)
+{
+	unsigned long flags __attribute__ ((unused));
+
+	if (page == 0) {
+		spin_lock_irqsave(&efx->biu_lock, flags);
+		efx_writed(efx, value, EFX_PAGED_REG(page, reg));
+		spin_unlock_irqrestore(&efx->biu_lock, flags);
+	} else {
+		efx_writed(efx, value, EFX_PAGED_REG(page, reg));
+	}
+}
+
+#endif /* EFX_IO_H */
diff --git a/drivers/net/sfc/mac.h b/drivers/net/sfc/mac.h
index 4e70742..f1aa5f3 100644
--- a/drivers/net/sfc/mac.h
+++ b/drivers/net/sfc/mac.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -15,5 +15,9 @@
 
 extern struct efx_mac_operations falcon_gmac_operations;
 extern struct efx_mac_operations falcon_xmac_operations;
+extern struct efx_mac_operations efx_mcdi_mac_operations;
+extern void falcon_reconfigure_xmac_core(struct efx_nic *efx);
+extern int efx_mcdi_mac_stats(struct efx_nic *efx, dma_addr_t dma_addr,
+			      u32 dma_len, int enable, int clear);
 
 #endif
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
new file mode 100644
index 0000000..683353b
--- /dev/null
+++ b/drivers/net/sfc/mcdi.c
@@ -0,0 +1,1112 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2008-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/delay.h>
+#include "net_driver.h"
+#include "nic.h"
+#include "io.h"
+#include "regs.h"
+#include "mcdi_pcol.h"
+#include "phy.h"
+
+/**************************************************************************
+ *
+ * Management-Controller-to-Driver Interface
+ *
+ **************************************************************************
+ */
+
+/* Software-defined structure to the shared-memory */
+#define CMD_NOTIFY_PORT0 0
+#define CMD_NOTIFY_PORT1 4
+#define CMD_PDU_PORT0    0x008
+#define CMD_PDU_PORT1    0x108
+#define REBOOT_FLAG_PORT0 0x3f8
+#define REBOOT_FLAG_PORT1 0x3fc
+
+#define MCDI_RPC_TIMEOUT       10 /*seconds */
+
+#define MCDI_PDU(efx)							\
+	(efx_port_num(efx) ? CMD_PDU_PORT1 : CMD_PDU_PORT0)
+#define MCDI_DOORBELL(efx)						\
+	(efx_port_num(efx) ? CMD_NOTIFY_PORT1 : CMD_NOTIFY_PORT0)
+#define MCDI_REBOOT_FLAG(efx)						\
+	(efx_port_num(efx) ? REBOOT_FLAG_PORT1 : REBOOT_FLAG_PORT0)
+
+#define SEQ_MASK							\
+	EFX_MASK32(EFX_WIDTH(MCDI_HEADER_SEQ))
+
+static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx)
+{
+	struct siena_nic_data *nic_data;
+	EFX_BUG_ON_PARANOID(efx_nic_rev(efx) < EFX_REV_SIENA_A0);
+	nic_data = efx->nic_data;
+	return &nic_data->mcdi;
+}
+
+void efx_mcdi_init(struct efx_nic *efx)
+{
+	struct efx_mcdi_iface *mcdi;
+
+	if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
+		return;
+
+	mcdi = efx_mcdi(efx);
+	init_waitqueue_head(&mcdi->wq);
+	spin_lock_init(&mcdi->iface_lock);
+	atomic_set(&mcdi->state, MCDI_STATE_QUIESCENT);
+	mcdi->mode = MCDI_MODE_POLL;
+
+	(void) efx_mcdi_poll_reboot(efx);
+}
+
+static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd,
+			    const u8 *inbuf, size_t inlen)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+	unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+	unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx);
+	unsigned int i;
+	efx_dword_t hdr;
+	u32 xflags, seqno;
+
+	BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
+	BUG_ON(inlen & 3 || inlen >= 0x100);
+
+	seqno = mcdi->seqno & SEQ_MASK;
+	xflags = 0;
+	if (mcdi->mode == MCDI_MODE_EVENTS)
+		xflags |= MCDI_HEADER_XFLAGS_EVREQ;
+
+	EFX_POPULATE_DWORD_6(hdr,
+			     MCDI_HEADER_RESPONSE, 0,
+			     MCDI_HEADER_RESYNC, 1,
+			     MCDI_HEADER_CODE, cmd,
+			     MCDI_HEADER_DATALEN, inlen,
+			     MCDI_HEADER_SEQ, seqno,
+			     MCDI_HEADER_XFLAGS, xflags);
+
+	efx_writed(efx, &hdr, pdu);
+
+	for (i = 0; i < inlen; i += 4)
+		_efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i);
+
+	/* Ensure the payload is written out before the header */
+	wmb();
+
+	/* ring the doorbell with a distinctive value */
+	_efx_writed(efx, (__force __le32) 0x45789abc, doorbell);
+}
+
+static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+	int i;
+
+	BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
+	BUG_ON(outlen & 3 || outlen >= 0x100);
+
+	for (i = 0; i < outlen; i += 4)
+		*((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i);
+}
+
+static int efx_mcdi_poll(struct efx_nic *efx)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+	unsigned int time, finish;
+	unsigned int respseq, respcmd, error;
+	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+	unsigned int rc, spins;
+	efx_dword_t reg;
+
+	/* Check for a reboot atomically with respect to efx_mcdi_copyout() */
+	rc = efx_mcdi_poll_reboot(efx);
+	if (rc)
+		goto out;
+
+	/* Poll for completion. Poll quickly (once a us) for the 1st jiffy,
+	 * because generally mcdi responses are fast. After that, back off
+	 * and poll once a jiffy (approximately)
+	 */
+	spins = TICK_USEC;
+	finish = get_seconds() + MCDI_RPC_TIMEOUT;
+
+	while (1) {
+		if (spins != 0) {
+			--spins;
+			udelay(1);
+		} else
+			schedule();
+
+		time = get_seconds();
+
+		rmb();
+		efx_readd(efx, &reg, pdu);
+
+		/* All 1's indicates that shared memory is in reset (and is
+		 * not a valid header). Wait for it to come out reset before
+		 * completing the command */
+		if (EFX_DWORD_FIELD(reg, EFX_DWORD_0) != 0xffffffff &&
+		    EFX_DWORD_FIELD(reg, MCDI_HEADER_RESPONSE))
+			break;
+
+		if (time >= finish)
+			return -ETIMEDOUT;
+	}
+
+	mcdi->resplen = EFX_DWORD_FIELD(reg, MCDI_HEADER_DATALEN);
+	respseq = EFX_DWORD_FIELD(reg, MCDI_HEADER_SEQ);
+	respcmd = EFX_DWORD_FIELD(reg, MCDI_HEADER_CODE);
+	error = EFX_DWORD_FIELD(reg, MCDI_HEADER_ERROR);
+
+	if (error && mcdi->resplen == 0) {
+		EFX_ERR(efx, "MC rebooted\n");
+		rc = EIO;
+	} else if ((respseq ^ mcdi->seqno) & SEQ_MASK) {
+		EFX_ERR(efx, "MC response mismatch tx seq 0x%x rx seq 0x%x\n",
+			respseq, mcdi->seqno);
+		rc = EIO;
+	} else if (error) {
+		efx_readd(efx, &reg, pdu + 4);
+		switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) {
+#define TRANSLATE_ERROR(name)					\
+		case MC_CMD_ERR_ ## name:			\
+			rc = name;				\
+			break
+			TRANSLATE_ERROR(ENOENT);
+			TRANSLATE_ERROR(EINTR);
+			TRANSLATE_ERROR(EACCES);
+			TRANSLATE_ERROR(EBUSY);
+			TRANSLATE_ERROR(EINVAL);
+			TRANSLATE_ERROR(EDEADLK);
+			TRANSLATE_ERROR(ENOSYS);
+			TRANSLATE_ERROR(ETIME);
+#undef TRANSLATE_ERROR
+		default:
+			rc = EIO;
+			break;
+		}
+	} else
+		rc = 0;
+
+out:
+	mcdi->resprc = rc;
+	if (rc)
+		mcdi->resplen = 0;
+
+	/* Return rc=0 like wait_event_timeout() */
+	return 0;
+}
+
+/* Test and clear MC-rebooted flag for this port/function */
+int efx_mcdi_poll_reboot(struct efx_nic *efx)
+{
+	unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx);
+	efx_dword_t reg;
+	uint32_t value;
+
+	if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
+		return false;
+
+	efx_readd(efx, &reg, addr);
+	value = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
+
+	if (value == 0)
+		return 0;
+
+	EFX_ZERO_DWORD(reg);
+	efx_writed(efx, &reg, addr);
+
+	if (value == MC_STATUS_DWORD_ASSERT)
+		return -EINTR;
+	else
+		return -EIO;
+}
+
+static void efx_mcdi_acquire(struct efx_mcdi_iface *mcdi)
+{
+	/* Wait until the interface becomes QUIESCENT and we win the race
+	 * to mark it RUNNING. */
+	wait_event(mcdi->wq,
+		   atomic_cmpxchg(&mcdi->state,
+				  MCDI_STATE_QUIESCENT,
+				  MCDI_STATE_RUNNING)
+		   == MCDI_STATE_QUIESCENT);
+}
+
+static int efx_mcdi_await_completion(struct efx_nic *efx)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+
+	if (wait_event_timeout(
+		    mcdi->wq,
+		    atomic_read(&mcdi->state) == MCDI_STATE_COMPLETED,
+		    msecs_to_jiffies(MCDI_RPC_TIMEOUT * 1000)) == 0)
+		return -ETIMEDOUT;
+
+	/* Check if efx_mcdi_set_mode() switched us back to polled completions.
+	 * In which case, poll for completions directly. If efx_mcdi_ev_cpl()
+	 * completed the request first, then we'll just end up completing the
+	 * request again, which is safe.
+	 *
+	 * We need an smp_rmb() to synchronise with efx_mcdi_mode_poll(), which
+	 * wait_event_timeout() implicitly provides.
+	 */
+	if (mcdi->mode == MCDI_MODE_POLL)
+		return efx_mcdi_poll(efx);
+
+	return 0;
+}
+
+static bool efx_mcdi_complete(struct efx_mcdi_iface *mcdi)
+{
+	/* If the interface is RUNNING, then move to COMPLETED and wake any
+	 * waiters. If the interface isn't in RUNNING then we've received a
+	 * duplicate completion after we've already transitioned back to
+	 * QUIESCENT. [A subsequent invocation would increment seqno, so would
+	 * have failed the seqno check].
+	 */
+	if (atomic_cmpxchg(&mcdi->state,
+			   MCDI_STATE_RUNNING,
+			   MCDI_STATE_COMPLETED) == MCDI_STATE_RUNNING) {
+		wake_up(&mcdi->wq);
+		return true;
+	}
+
+	return false;
+}
+
+static void efx_mcdi_release(struct efx_mcdi_iface *mcdi)
+{
+	atomic_set(&mcdi->state, MCDI_STATE_QUIESCENT);
+	wake_up(&mcdi->wq);
+}
+
+static void efx_mcdi_ev_cpl(struct efx_nic *efx, unsigned int seqno,
+			    unsigned int datalen, unsigned int errno)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+	bool wake = false;
+
+	spin_lock(&mcdi->iface_lock);
+
+	if ((seqno ^ mcdi->seqno) & SEQ_MASK) {
+		if (mcdi->credits)
+			/* The request has been cancelled */
+			--mcdi->credits;
+		else
+			EFX_ERR(efx, "MC response mismatch tx seq 0x%x rx "
+				"seq 0x%x\n", seqno, mcdi->seqno);
+	} else {
+		mcdi->resprc = errno;
+		mcdi->resplen = datalen;
+
+		wake = true;
+	}
+
+	spin_unlock(&mcdi->iface_lock);
+
+	if (wake)
+		efx_mcdi_complete(mcdi);
+}
+
+/* Issue the given command by writing the data into the shared memory PDU,
+ * ring the doorbell and wait for completion. Copyout the result. */
+int efx_mcdi_rpc(struct efx_nic *efx, unsigned cmd,
+		 const u8 *inbuf, size_t inlen, u8 *outbuf, size_t outlen,
+		 size_t *outlen_actual)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+	int rc;
+	BUG_ON(efx_nic_rev(efx) < EFX_REV_SIENA_A0);
+
+	efx_mcdi_acquire(mcdi);
+
+	/* Serialise with efx_mcdi_ev_cpl() and efx_mcdi_ev_death() */
+	spin_lock_bh(&mcdi->iface_lock);
+	++mcdi->seqno;
+	spin_unlock_bh(&mcdi->iface_lock);
+
+	efx_mcdi_copyin(efx, cmd, inbuf, inlen);
+
+	if (mcdi->mode == MCDI_MODE_POLL)
+		rc = efx_mcdi_poll(efx);
+	else
+		rc = efx_mcdi_await_completion(efx);
+
+	if (rc != 0) {
+		/* Close the race with efx_mcdi_ev_cpl() executing just too late
+		 * and completing a request we've just cancelled, by ensuring
+		 * that the seqno check therein fails.
+		 */
+		spin_lock_bh(&mcdi->iface_lock);
+		++mcdi->seqno;
+		++mcdi->credits;
+		spin_unlock_bh(&mcdi->iface_lock);
+
+		EFX_ERR(efx, "MC command 0x%x inlen %d mode %d timed out\n",
+			cmd, (int)inlen, mcdi->mode);
+	} else {
+		size_t resplen;
+
+		/* At the very least we need a memory barrier here to ensure
+		 * we pick up changes from efx_mcdi_ev_cpl(). Protect against
+		 * a spurious efx_mcdi_ev_cpl() running concurrently by
+		 * acquiring the iface_lock. */
+		spin_lock_bh(&mcdi->iface_lock);
+		rc = -mcdi->resprc;
+		resplen = mcdi->resplen;
+		spin_unlock_bh(&mcdi->iface_lock);
+
+		if (rc == 0) {
+			efx_mcdi_copyout(efx, outbuf,
+					 min(outlen, mcdi->resplen + 3) & ~0x3);
+			if (outlen_actual != NULL)
+				*outlen_actual = resplen;
+		} else if (cmd == MC_CMD_REBOOT && rc == -EIO)
+			; /* Don't reset if MC_CMD_REBOOT returns EIO */
+		else if (rc == -EIO || rc == -EINTR) {
+			EFX_ERR(efx, "MC fatal error %d\n", -rc);
+			efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE);
+		} else
+			EFX_ERR(efx, "MC command 0x%x inlen %d failed rc=%d\n",
+				cmd, (int)inlen, -rc);
+	}
+
+	efx_mcdi_release(mcdi);
+	return rc;
+}
+
+void efx_mcdi_mode_poll(struct efx_nic *efx)
+{
+	struct efx_mcdi_iface *mcdi;
+
+	if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
+		return;
+
+	mcdi = efx_mcdi(efx);
+	if (mcdi->mode == MCDI_MODE_POLL)
+		return;
+
+	/* We can switch from event completion to polled completion, because
+	 * mcdi requests are always completed in shared memory. We do this by
+	 * switching the mode to POLL'd then completing the request.
+	 * efx_mcdi_await_completion() will then call efx_mcdi_poll().
+	 *
+	 * We need an smp_wmb() to synchronise with efx_mcdi_await_completion(),
+	 * which efx_mcdi_complete() provides for us.
+	 */
+	mcdi->mode = MCDI_MODE_POLL;
+
+	efx_mcdi_complete(mcdi);
+}
+
+void efx_mcdi_mode_event(struct efx_nic *efx)
+{
+	struct efx_mcdi_iface *mcdi;
+
+	if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
+		return;
+
+	mcdi = efx_mcdi(efx);
+
+	if (mcdi->mode == MCDI_MODE_EVENTS)
+		return;
+
+	/* We can't switch from polled to event completion in the middle of a
+	 * request, because the completion method is specified in the request.
+	 * So acquire the interface to serialise the requestors. We don't need
+	 * to acquire the iface_lock to change the mode here, but we do need a
+	 * write memory barrier ensure that efx_mcdi_rpc() sees it, which
+	 * efx_mcdi_acquire() provides.
+	 */
+	efx_mcdi_acquire(mcdi);
+	mcdi->mode = MCDI_MODE_EVENTS;
+	efx_mcdi_release(mcdi);
+}
+
+static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
+{
+	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
+
+	/* If there is an outstanding MCDI request, it has been terminated
+	 * either by a BADASSERT or REBOOT event. If the mcdi interface is
+	 * in polled mode, then do nothing because the MC reboot handler will
+	 * set the header correctly. However, if the mcdi interface is waiting
+	 * for a CMDDONE event it won't receive it [and since all MCDI events
+	 * are sent to the same queue, we can't be racing with
+	 * efx_mcdi_ev_cpl()]
+	 *
+	 * There's a race here with efx_mcdi_rpc(), because we might receive
+	 * a REBOOT event *before* the request has been copied out. In polled
+	 * mode (during startup) this is irrelevent, because efx_mcdi_complete()
+	 * is ignored. In event mode, this condition is just an edge-case of
+	 * receiving a REBOOT event after posting the MCDI request. Did the mc
+	 * reboot before or after the copyout? The best we can do always is
+	 * just return failure.
+	 */
+	spin_lock(&mcdi->iface_lock);
+	if (efx_mcdi_complete(mcdi)) {
+		if (mcdi->mode == MCDI_MODE_EVENTS) {
+			mcdi->resprc = rc;
+			mcdi->resplen = 0;
+		}
+	} else
+		/* Nobody was waiting for an MCDI request, so trigger a reset */
+		efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE);
+
+	spin_unlock(&mcdi->iface_lock);
+}
+
+static unsigned int efx_mcdi_event_link_speed[] = {
+	[MCDI_EVENT_LINKCHANGE_SPEED_100M] = 100,
+	[MCDI_EVENT_LINKCHANGE_SPEED_1G] = 1000,
+	[MCDI_EVENT_LINKCHANGE_SPEED_10G] = 10000,
+};
+
+
+static void efx_mcdi_process_link_change(struct efx_nic *efx, efx_qword_t *ev)
+{
+	u32 flags, fcntl, speed, lpa;
+
+	speed = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_SPEED);
+	EFX_BUG_ON_PARANOID(speed >= ARRAY_SIZE(efx_mcdi_event_link_speed));
+	speed = efx_mcdi_event_link_speed[speed];
+
+	flags = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_LINK_FLAGS);
+	fcntl = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_FCNTL);
+	lpa = EFX_QWORD_FIELD(*ev, MCDI_EVENT_LINKCHANGE_LP_CAP);
+
+	/* efx->link_state is only modified by efx_mcdi_phy_get_link(),
+	 * which is only run after flushing the event queues. Therefore, it
+	 * is safe to modify the link state outside of the mac_lock here.
+	 */
+	efx_mcdi_phy_decode_link(efx, &efx->link_state, speed, flags, fcntl);
+
+	efx_mcdi_phy_check_fcntl(efx, lpa);
+
+	efx_link_status_changed(efx);
+}
+
+static const char *sensor_names[] = {
+	[MC_CMD_SENSOR_CONTROLLER_TEMP] = "Controller temp. sensor",
+	[MC_CMD_SENSOR_PHY_COMMON_TEMP] = "PHY shared temp. sensor",
+	[MC_CMD_SENSOR_CONTROLLER_COOLING] = "Controller cooling",
+	[MC_CMD_SENSOR_PHY0_TEMP] = "PHY 0 temp. sensor",
+	[MC_CMD_SENSOR_PHY0_COOLING] = "PHY 0 cooling",
+	[MC_CMD_SENSOR_PHY1_TEMP] = "PHY 1 temp. sensor",
+	[MC_CMD_SENSOR_PHY1_COOLING] = "PHY 1 cooling",
+	[MC_CMD_SENSOR_IN_1V0] = "1.0V supply sensor",
+	[MC_CMD_SENSOR_IN_1V2] = "1.2V supply sensor",
+	[MC_CMD_SENSOR_IN_1V8] = "1.8V supply sensor",
+	[MC_CMD_SENSOR_IN_2V5] = "2.5V supply sensor",
+	[MC_CMD_SENSOR_IN_3V3] = "3.3V supply sensor",
+	[MC_CMD_SENSOR_IN_12V0] = "12V supply sensor"
+};
+
+static const char *sensor_status_names[] = {
+	[MC_CMD_SENSOR_STATE_OK] = "OK",
+	[MC_CMD_SENSOR_STATE_WARNING] = "Warning",
+	[MC_CMD_SENSOR_STATE_FATAL] = "Fatal",
+	[MC_CMD_SENSOR_STATE_BROKEN] = "Device failure",
+};
+
+static void efx_mcdi_sensor_event(struct efx_nic *efx, efx_qword_t *ev)
+{
+	unsigned int monitor, state, value;
+	const char *name, *state_txt;
+	monitor = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_MONITOR);
+	state = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_STATE);
+	value = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_VALUE);
+	/* Deal gracefully with the board having more drivers than we
+	 * know about, but do not expect new sensor states. */
+	name = (monitor >= ARRAY_SIZE(sensor_names))
+				    ? "No sensor name available" :
+				    sensor_names[monitor];
+	EFX_BUG_ON_PARANOID(state >= ARRAY_SIZE(sensor_status_names));
+	state_txt = sensor_status_names[state];
+
+	EFX_ERR(efx, "Sensor %d (%s) reports condition '%s' for raw value %d\n",
+		monitor, name, state_txt, value);
+}
+
+/* Called from  falcon_process_eventq for MCDI events */
+void efx_mcdi_process_event(struct efx_channel *channel,
+			    efx_qword_t *event)
+{
+	struct efx_nic *efx = channel->efx;
+	int code = EFX_QWORD_FIELD(*event, MCDI_EVENT_CODE);
+	u32 data = EFX_QWORD_FIELD(*event, MCDI_EVENT_DATA);
+
+	switch (code) {
+	case MCDI_EVENT_CODE_BADSSERT:
+		EFX_ERR(efx, "MC watchdog or assertion failure at 0x%x\n", data);
+		efx_mcdi_ev_death(efx, EINTR);
+		break;
+
+	case MCDI_EVENT_CODE_PMNOTICE:
+		EFX_INFO(efx, "MCDI PM event.\n");
+		break;
+
+	case MCDI_EVENT_CODE_CMDDONE:
+		efx_mcdi_ev_cpl(efx,
+				MCDI_EVENT_FIELD(*event, CMDDONE_SEQ),
+				MCDI_EVENT_FIELD(*event, CMDDONE_DATALEN),
+				MCDI_EVENT_FIELD(*event, CMDDONE_ERRNO));
+		break;
+
+	case MCDI_EVENT_CODE_LINKCHANGE:
+		efx_mcdi_process_link_change(efx, event);
+		break;
+	case MCDI_EVENT_CODE_SENSOREVT:
+		efx_mcdi_sensor_event(efx, event);
+		break;
+	case MCDI_EVENT_CODE_SCHEDERR:
+		EFX_INFO(efx, "MC Scheduler error address=0x%x\n", data);
+		break;
+	case MCDI_EVENT_CODE_REBOOT:
+		EFX_INFO(efx, "MC Reboot\n");
+		efx_mcdi_ev_death(efx, EIO);
+		break;
+	case MCDI_EVENT_CODE_MAC_STATS_DMA:
+		/* MAC stats are gather lazily.  We can ignore this. */
+		break;
+
+	default:
+		EFX_ERR(efx, "Unknown MCDI event 0x%x\n", code);
+	}
+}
+
+/**************************************************************************
+ *
+ * Specific request functions
+ *
+ **************************************************************************
+ */
+
+int efx_mcdi_fwver(struct efx_nic *efx, u64 *version, u32 *build)
+{
+	u8 outbuf[ALIGN(MC_CMD_GET_VERSION_V1_OUT_LEN, 4)];
+	size_t outlength;
+	const __le16 *ver_words;
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_GET_VERSION_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_VERSION, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlength);
+	if (rc)
+		goto fail;
+
+	if (outlength == MC_CMD_GET_VERSION_V0_OUT_LEN) {
+		*version = 0;
+		*build = MCDI_DWORD(outbuf, GET_VERSION_OUT_FIRMWARE);
+		return 0;
+	}
+
+	if (outlength < MC_CMD_GET_VERSION_V1_OUT_LEN) {
+		rc = -EMSGSIZE;
+		goto fail;
+	}
+
+	ver_words = (__le16 *)MCDI_PTR(outbuf, GET_VERSION_OUT_VERSION);
+	*version = (((u64)le16_to_cpu(ver_words[0]) << 48) |
+		    ((u64)le16_to_cpu(ver_words[1]) << 32) |
+		    ((u64)le16_to_cpu(ver_words[2]) << 16) |
+		    le16_to_cpu(ver_words[3]));
+	*build = MCDI_DWORD(outbuf, GET_VERSION_OUT_FIRMWARE);
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
+			bool *was_attached)
+{
+	u8 inbuf[MC_CMD_DRV_ATTACH_IN_LEN];
+	u8 outbuf[MC_CMD_DRV_ATTACH_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, DRV_ATTACH_IN_NEW_STATE,
+		       driver_operating ? 1 : 0);
+	MCDI_SET_DWORD(inbuf, DRV_ATTACH_IN_UPDATE, 1);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_DRV_ATTACH, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+	if (outlen < MC_CMD_DRV_ATTACH_OUT_LEN)
+		goto fail;
+
+	if (was_attached != NULL)
+		*was_attached = MCDI_DWORD(outbuf, DRV_ATTACH_OUT_OLD_STATE);
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_get_board_cfg(struct efx_nic *efx, u8 *mac_address,
+			   u16 *fw_subtype_list)
+{
+	uint8_t outbuf[MC_CMD_GET_BOARD_CFG_OUT_LEN];
+	size_t outlen;
+	int port_num = efx_port_num(efx);
+	int offset;
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_GET_BOARD_CFG_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_BOARD_CFG, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	if (outlen < MC_CMD_GET_BOARD_CFG_OUT_LEN) {
+		rc = -EMSGSIZE;
+		goto fail;
+	}
+
+	offset = (port_num)
+		? MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1_OFST
+		: MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_OFST;
+	if (mac_address)
+		memcpy(mac_address, outbuf + offset, ETH_ALEN);
+	if (fw_subtype_list)
+		memcpy(fw_subtype_list,
+		       outbuf + MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_OFST,
+		       MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN);
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d len=%d\n", __func__, rc, (int)outlen);
+
+	return rc;
+}
+
+int efx_mcdi_log_ctrl(struct efx_nic *efx, bool evq, bool uart, u32 dest_evq)
+{
+	u8 inbuf[MC_CMD_LOG_CTRL_IN_LEN];
+	u32 dest = 0;
+	int rc;
+
+	if (uart)
+		dest |= MC_CMD_LOG_CTRL_IN_LOG_DEST_UART;
+	if (evq)
+		dest |= MC_CMD_LOG_CTRL_IN_LOG_DEST_EVQ;
+
+	MCDI_SET_DWORD(inbuf, LOG_CTRL_IN_LOG_DEST, dest);
+	MCDI_SET_DWORD(inbuf, LOG_CTRL_IN_LOG_DEST_EVQ, dest_evq);
+
+	BUILD_BUG_ON(MC_CMD_LOG_CTRL_OUT_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_LOG_CTRL, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_types(struct efx_nic *efx, u32 *nvram_types_out)
+{
+	u8 outbuf[MC_CMD_NVRAM_TYPES_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_NVRAM_TYPES_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_TYPES, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+	if (outlen < MC_CMD_NVRAM_TYPES_OUT_LEN)
+		goto fail;
+
+	*nvram_types_out = MCDI_DWORD(outbuf, NVRAM_TYPES_OUT_TYPES);
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n",
+		__func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_info(struct efx_nic *efx, unsigned int type,
+			size_t *size_out, size_t *erase_size_out,
+			bool *protected_out)
+{
+	u8 inbuf[MC_CMD_NVRAM_INFO_IN_LEN];
+	u8 outbuf[MC_CMD_NVRAM_INFO_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_INFO_IN_TYPE, type);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_INFO, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+	if (outlen < MC_CMD_NVRAM_INFO_OUT_LEN)
+		goto fail;
+
+	*size_out = MCDI_DWORD(outbuf, NVRAM_INFO_OUT_SIZE);
+	*erase_size_out = MCDI_DWORD(outbuf, NVRAM_INFO_OUT_ERASESIZE);
+	*protected_out = !!(MCDI_DWORD(outbuf, NVRAM_INFO_OUT_FLAGS) &
+				(1 << MC_CMD_NVRAM_PROTECTED_LBN));
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_update_start(struct efx_nic *efx, unsigned int type)
+{
+	u8 inbuf[MC_CMD_NVRAM_UPDATE_START_IN_LEN];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_UPDATE_START_IN_TYPE, type);
+
+	BUILD_BUG_ON(MC_CMD_NVRAM_UPDATE_START_OUT_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_UPDATE_START, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_read(struct efx_nic *efx, unsigned int type,
+			loff_t offset, u8 *buffer, size_t length)
+{
+	u8 inbuf[MC_CMD_NVRAM_READ_IN_LEN];
+	u8 outbuf[MC_CMD_NVRAM_READ_OUT_LEN(length)];
+	size_t outlen;
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_READ_IN_TYPE, type);
+	MCDI_SET_DWORD(inbuf, NVRAM_READ_IN_OFFSET, offset);
+	MCDI_SET_DWORD(inbuf, NVRAM_READ_IN_LENGTH, length);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_READ, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	memcpy(buffer, MCDI_PTR(outbuf, NVRAM_READ_OUT_READ_BUFFER), length);
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
+			   loff_t offset, const u8 *buffer, size_t length)
+{
+	u8 inbuf[MC_CMD_NVRAM_WRITE_IN_LEN(length)];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_TYPE, type);
+	MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_OFFSET, offset);
+	MCDI_SET_DWORD(inbuf, NVRAM_WRITE_IN_LENGTH, length);
+	memcpy(MCDI_PTR(inbuf, NVRAM_WRITE_IN_WRITE_BUFFER), buffer, length);
+
+	BUILD_BUG_ON(MC_CMD_NVRAM_WRITE_OUT_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_WRITE, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
+			 loff_t offset, size_t length)
+{
+	u8 inbuf[MC_CMD_NVRAM_ERASE_IN_LEN];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_ERASE_IN_TYPE, type);
+	MCDI_SET_DWORD(inbuf, NVRAM_ERASE_IN_OFFSET, offset);
+	MCDI_SET_DWORD(inbuf, NVRAM_ERASE_IN_LENGTH, length);
+
+	BUILD_BUG_ON(MC_CMD_NVRAM_ERASE_OUT_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_ERASE, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_nvram_update_finish(struct efx_nic *efx, unsigned int type)
+{
+	u8 inbuf[MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, NVRAM_UPDATE_FINISH_IN_TYPE, type);
+
+	BUILD_BUG_ON(MC_CMD_NVRAM_UPDATE_FINISH_OUT_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_NVRAM_UPDATE_FINISH, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_handle_assertion(struct efx_nic *efx)
+{
+	union {
+		u8 asserts[MC_CMD_GET_ASSERTS_IN_LEN];
+		u8 reboot[MC_CMD_REBOOT_IN_LEN];
+	} inbuf;
+	u8 assertion[MC_CMD_GET_ASSERTS_OUT_LEN];
+	unsigned int flags, index, ofst;
+	const char *reason;
+	size_t outlen;
+	int retry;
+	int rc;
+
+	/* Check if the MC is in the assertion handler, retrying twice. Once
+	 * because a boot-time assertion might cause this command to fail
+	 * with EINTR. And once again because GET_ASSERTS can race with
+	 * MC_CMD_REBOOT running on the other port. */
+	retry = 2;
+	do {
+		MCDI_SET_DWORD(inbuf.asserts, GET_ASSERTS_IN_CLEAR, 0);
+		rc = efx_mcdi_rpc(efx, MC_CMD_GET_ASSERTS,
+				  inbuf.asserts, MC_CMD_GET_ASSERTS_IN_LEN,
+				  assertion, sizeof(assertion), &outlen);
+	} while ((rc == -EINTR || rc == -EIO) && retry-- > 0);
+
+	if (rc)
+		return rc;
+	if (outlen < MC_CMD_GET_ASSERTS_OUT_LEN)
+		return -EINVAL;
+
+	flags = MCDI_DWORD(assertion, GET_ASSERTS_OUT_GLOBAL_FLAGS);
+	if (flags == MC_CMD_GET_ASSERTS_FLAGS_NO_FAILS)
+		return 0;
+
+	/* Reset the hardware atomically such that only one port with succeed.
+	 * This command will succeed if a reboot is no longer required (because
+	 * the other port did it first), but fail with EIO if it succeeds.
+	 */
+	BUILD_BUG_ON(MC_CMD_REBOOT_OUT_LEN != 0);
+	MCDI_SET_DWORD(inbuf.reboot, REBOOT_IN_FLAGS,
+		       MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION);
+	efx_mcdi_rpc(efx, MC_CMD_REBOOT, inbuf.reboot, MC_CMD_REBOOT_IN_LEN,
+		     NULL, 0, NULL);
+
+	/* Print out the assertion */
+	reason = (flags == MC_CMD_GET_ASSERTS_FLAGS_SYS_FAIL)
+		? "system-level assertion"
+		: (flags == MC_CMD_GET_ASSERTS_FLAGS_THR_FAIL)
+		? "thread-level assertion"
+		: (flags == MC_CMD_GET_ASSERTS_FLAGS_WDOG_FIRED)
+		? "watchdog reset"
+		: "unknown assertion";
+	EFX_ERR(efx, "MCPU %s at PC = 0x%.8x in thread 0x%.8x\n", reason,
+		MCDI_DWORD(assertion, GET_ASSERTS_OUT_SAVED_PC_OFFS),
+		MCDI_DWORD(assertion, GET_ASSERTS_OUT_THREAD_OFFS));
+
+	/* Print out the registers */
+	ofst = MC_CMD_GET_ASSERTS_OUT_GP_REGS_OFFS_OFST;
+	for (index = 1; index < 32; index++) {
+		EFX_ERR(efx, "R%.2d (?): 0x%.8x\n", index,
+			MCDI_DWORD2(assertion, ofst));
+		ofst += sizeof(efx_dword_t);
+	}
+
+	return 0;
+}
+
+void efx_mcdi_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
+{
+	u8 inbuf[MC_CMD_SET_ID_LED_IN_LEN];
+	int rc;
+
+	BUILD_BUG_ON(EFX_LED_OFF != MC_CMD_LED_OFF);
+	BUILD_BUG_ON(EFX_LED_ON != MC_CMD_LED_ON);
+	BUILD_BUG_ON(EFX_LED_DEFAULT != MC_CMD_LED_DEFAULT);
+
+	BUILD_BUG_ON(MC_CMD_SET_ID_LED_OUT_LEN != 0);
+
+	MCDI_SET_DWORD(inbuf, SET_ID_LED_IN_STATE, mode);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_SET_ID_LED, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+}
+
+int efx_mcdi_reset_port(struct efx_nic *efx)
+{
+	int rc = efx_mcdi_rpc(efx, MC_CMD_PORT_RESET, NULL, 0, NULL, 0, NULL);
+	if (rc)
+		EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_reset_mc(struct efx_nic *efx)
+{
+	u8 inbuf[MC_CMD_REBOOT_IN_LEN];
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_REBOOT_OUT_LEN != 0);
+	MCDI_SET_DWORD(inbuf, REBOOT_IN_FLAGS, 0);
+	rc = efx_mcdi_rpc(efx, MC_CMD_REBOOT, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	/* White is black, and up is down */
+	if (rc == -EIO)
+		return 0;
+	if (rc == 0)
+		rc = -EIO;
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_wol_filter_set(struct efx_nic *efx, u32 type,
+			    const u8 *mac, int *id_out)
+{
+	u8 inbuf[MC_CMD_WOL_FILTER_SET_IN_LEN];
+	u8 outbuf[MC_CMD_WOL_FILTER_SET_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, WOL_FILTER_SET_IN_WOL_TYPE, type);
+	MCDI_SET_DWORD(inbuf, WOL_FILTER_SET_IN_FILTER_MODE,
+		       MC_CMD_FILTER_MODE_SIMPLE);
+	memcpy(MCDI_PTR(inbuf, WOL_FILTER_SET_IN_MAGIC_MAC), mac, ETH_ALEN);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_WOL_FILTER_SET, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	if (outlen < MC_CMD_WOL_FILTER_SET_OUT_LEN) {
+		rc = -EMSGSIZE;
+		goto fail;
+	}
+
+	*id_out = (int)MCDI_DWORD(outbuf, WOL_FILTER_SET_OUT_FILTER_ID);
+
+	return 0;
+
+fail:
+	*id_out = -1;
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+
+}
+
+
+int
+efx_mcdi_wol_filter_set_magic(struct efx_nic *efx,  const u8 *mac, int *id_out)
+{
+	return efx_mcdi_wol_filter_set(efx, MC_CMD_WOL_TYPE_MAGIC, mac, id_out);
+}
+
+
+int efx_mcdi_wol_filter_get_magic(struct efx_nic *efx, int *id_out)
+{
+	u8 outbuf[MC_CMD_WOL_FILTER_GET_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_WOL_FILTER_GET, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	if (outlen < MC_CMD_WOL_FILTER_GET_OUT_LEN) {
+		rc = -EMSGSIZE;
+		goto fail;
+	}
+
+	*id_out = (int)MCDI_DWORD(outbuf, WOL_FILTER_GET_OUT_FILTER_ID);
+
+	return 0;
+
+fail:
+	*id_out = -1;
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+
+int efx_mcdi_wol_filter_remove(struct efx_nic *efx, int id)
+{
+	u8 inbuf[MC_CMD_WOL_FILTER_REMOVE_IN_LEN];
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, WOL_FILTER_REMOVE_IN_FILTER_ID, (u32)id);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_WOL_FILTER_REMOVE, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+
+int efx_mcdi_wol_filter_reset(struct efx_nic *efx)
+{
+	int rc;
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_WOL_FILTER_RESET, NULL, 0, NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
diff --git a/drivers/net/sfc/mcdi.h b/drivers/net/sfc/mcdi.h
new file mode 100644
index 0000000..de91672
--- /dev/null
+++ b/drivers/net/sfc/mcdi.h
@@ -0,0 +1,130 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2008-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_MCDI_H
+#define EFX_MCDI_H
+
+/**
+ * enum efx_mcdi_state
+ * @MCDI_STATE_QUIESCENT: No pending MCDI requests. If the caller holds the
+ *	mcdi_lock then they are able to move to MCDI_STATE_RUNNING
+ * @MCDI_STATE_RUNNING: There is an MCDI request pending. Only the thread that
+ *	moved into this state is allowed to move out of it.
+ * @MCDI_STATE_COMPLETED: An MCDI request has completed, but the owning thread
+ *	has not yet consumed the result. For all other threads, equivalent to
+ *	MCDI_STATE_RUNNING.
+ */
+enum efx_mcdi_state {
+	MCDI_STATE_QUIESCENT,
+	MCDI_STATE_RUNNING,
+	MCDI_STATE_COMPLETED,
+};
+
+enum efx_mcdi_mode {
+	MCDI_MODE_POLL,
+	MCDI_MODE_EVENTS,
+};
+
+/**
+ * struct efx_mcdi_iface
+ * @state: Interface state. Waited for by mcdi_wq.
+ * @wq: Wait queue for threads waiting for state != STATE_RUNNING
+ * @iface_lock: Protects @credits, @seqno, @resprc, @resplen
+ * @mode: Poll for mcdi completion, or wait for an mcdi_event.
+ *	Serialised by @lock
+ * @seqno: The next sequence number to use for mcdi requests.
+ *	Serialised by @lock
+ * @credits: Number of spurious MCDI completion events allowed before we
+ *	trigger a fatal error. Protected by @lock
+ * @resprc: Returned MCDI completion
+ * @resplen: Returned payload length
+ */
+struct efx_mcdi_iface {
+	atomic_t state;
+	wait_queue_head_t wq;
+	spinlock_t iface_lock;
+	enum efx_mcdi_mode mode;
+	unsigned int credits;
+	unsigned int seqno;
+	unsigned int resprc;
+	size_t resplen;
+};
+
+extern void efx_mcdi_init(struct efx_nic *efx);
+
+extern int efx_mcdi_rpc(struct efx_nic *efx, unsigned cmd, const u8 *inbuf,
+			size_t inlen, u8 *outbuf, size_t outlen,
+			size_t *outlen_actual);
+
+extern int efx_mcdi_poll_reboot(struct efx_nic *efx);
+extern void efx_mcdi_mode_poll(struct efx_nic *efx);
+extern void efx_mcdi_mode_event(struct efx_nic *efx);
+
+extern void efx_mcdi_process_event(struct efx_channel *channel,
+				   efx_qword_t *event);
+
+#define MCDI_PTR2(_buf, _ofst)						\
+	(((u8 *)_buf) + _ofst)
+#define MCDI_SET_DWORD2(_buf, _ofst, _value)				\
+	EFX_POPULATE_DWORD_1(*((efx_dword_t *)MCDI_PTR2(_buf, _ofst)),	\
+			     EFX_DWORD_0, _value)
+#define MCDI_DWORD2(_buf, _ofst)					\
+	EFX_DWORD_FIELD(*((efx_dword_t *)MCDI_PTR2(_buf, _ofst)),	\
+			EFX_DWORD_0)
+#define MCDI_QWORD2(_buf, _ofst)					\
+	EFX_QWORD_FIELD64(*((efx_qword_t *)MCDI_PTR2(_buf, _ofst)),	\
+			  EFX_QWORD_0)
+
+#define MCDI_PTR(_buf, _ofst)						\
+	MCDI_PTR2(_buf, MC_CMD_ ## _ofst ## _OFST)
+#define MCDI_SET_DWORD(_buf, _ofst, _value)				\
+	MCDI_SET_DWORD2(_buf, MC_CMD_ ## _ofst ## _OFST, _value)
+#define MCDI_DWORD(_buf, _ofst)						\
+	MCDI_DWORD2(_buf, MC_CMD_ ## _ofst ## _OFST)
+#define MCDI_QWORD(_buf, _ofst)						\
+	MCDI_QWORD2(_buf, MC_CMD_ ## _ofst ## _OFST)
+
+#define MCDI_EVENT_FIELD(_ev, _field)			\
+	EFX_QWORD_FIELD(_ev, MCDI_EVENT_ ## _field)
+
+extern int efx_mcdi_fwver(struct efx_nic *efx, u64 *version, u32 *build);
+extern int efx_mcdi_drv_attach(struct efx_nic *efx, bool driver_operating,
+			       bool *was_attached_out);
+extern int efx_mcdi_get_board_cfg(struct efx_nic *efx, u8 *mac_address,
+				  u16 *fw_subtype_list);
+extern int efx_mcdi_log_ctrl(struct efx_nic *efx, bool evq, bool uart,
+			     u32 dest_evq);
+extern int efx_mcdi_nvram_types(struct efx_nic *efx, u32 *nvram_types_out);
+extern int efx_mcdi_nvram_info(struct efx_nic *efx, unsigned int type,
+			       size_t *size_out, size_t *erase_size_out,
+			       bool *protected_out);
+extern int efx_mcdi_nvram_update_start(struct efx_nic *efx,
+				       unsigned int type);
+extern int efx_mcdi_nvram_read(struct efx_nic *efx, unsigned int type,
+			       loff_t offset, u8 *buffer, size_t length);
+extern int efx_mcdi_nvram_write(struct efx_nic *efx, unsigned int type,
+				loff_t offset, const u8 *buffer,
+				size_t length);
+extern int efx_mcdi_nvram_erase(struct efx_nic *efx, unsigned int type,
+				loff_t offset, size_t length);
+extern int efx_mcdi_nvram_update_finish(struct efx_nic *efx,
+					unsigned int type);
+extern int efx_mcdi_handle_assertion(struct efx_nic *efx);
+extern void efx_mcdi_set_id_led(struct efx_nic *efx, enum efx_led_mode mode);
+extern int efx_mcdi_reset_port(struct efx_nic *efx);
+extern int efx_mcdi_reset_mc(struct efx_nic *efx);
+extern int efx_mcdi_wol_filter_set(struct efx_nic *efx, u32 type,
+				   const u8 *mac, int *id_out);
+extern int efx_mcdi_wol_filter_set_magic(struct efx_nic *efx,
+					 const u8 *mac, int *id_out);
+extern int efx_mcdi_wol_filter_get_magic(struct efx_nic *efx, int *id_out);
+extern int efx_mcdi_wol_filter_remove(struct efx_nic *efx, int id);
+extern int efx_mcdi_wol_filter_reset(struct efx_nic *efx);
+
+#endif /* EFX_MCDI_H */
diff --git a/drivers/net/sfc/mcdi_mac.c b/drivers/net/sfc/mcdi_mac.c
new file mode 100644
index 0000000..06d24a1
--- /dev/null
+++ b/drivers/net/sfc/mcdi_mac.c
@@ -0,0 +1,152 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include "net_driver.h"
+#include "efx.h"
+#include "mac.h"
+#include "mcdi.h"
+#include "mcdi_pcol.h"
+
+static int efx_mcdi_set_mac(struct efx_nic *efx)
+{
+	u32 reject, fcntl;
+	u8 cmdbytes[MC_CMD_SET_MAC_IN_LEN];
+
+	memcpy(cmdbytes + MC_CMD_SET_MAC_IN_ADDR_OFST,
+	       efx->net_dev->dev_addr, ETH_ALEN);
+
+	MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_MTU,
+			EFX_MAX_FRAME_LEN(efx->net_dev->mtu));
+	MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_DRAIN, 0);
+
+	/* The MCDI command provides for controlling accept/reject
+	 * of broadcast packets too, but the driver doesn't currently
+	 * expose this. */
+	reject = (efx->promiscuous) ? 0 :
+		(1 << MC_CMD_SET_MAC_IN_REJECT_UNCST_LBN);
+	MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_REJECT, reject);
+
+	switch (efx->wanted_fc) {
+	case EFX_FC_RX | EFX_FC_TX:
+		fcntl = MC_CMD_FCNTL_BIDIR;
+		break;
+	case EFX_FC_RX:
+		fcntl = MC_CMD_FCNTL_RESPOND;
+		break;
+	default:
+		fcntl = MC_CMD_FCNTL_OFF;
+		break;
+	}
+	if (efx->wanted_fc & EFX_FC_AUTO)
+		fcntl = MC_CMD_FCNTL_AUTO;
+
+	MCDI_SET_DWORD(cmdbytes, SET_MAC_IN_FCNTL, fcntl);
+
+	return efx_mcdi_rpc(efx, MC_CMD_SET_MAC, cmdbytes, sizeof(cmdbytes),
+			    NULL, 0, NULL);
+}
+
+static int efx_mcdi_get_mac_faults(struct efx_nic *efx, u32 *faults)
+{
+	u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+	size_t outlength;
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlength);
+	if (rc)
+		goto fail;
+
+	*faults = MCDI_DWORD(outbuf, GET_LINK_OUT_MAC_FAULT);
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n",
+		__func__, rc);
+	return rc;
+}
+
+int efx_mcdi_mac_stats(struct efx_nic *efx, dma_addr_t dma_addr,
+		       u32 dma_len, int enable, int clear)
+{
+	u8 inbuf[MC_CMD_MAC_STATS_IN_LEN];
+	int rc;
+	efx_dword_t *cmd_ptr;
+	int period = 1000;
+	u32 addr_hi;
+	u32 addr_lo;
+
+	BUILD_BUG_ON(MC_CMD_MAC_STATS_OUT_LEN != 0);
+
+	addr_lo = ((u64)dma_addr) >> 0;
+	addr_hi = ((u64)dma_addr) >> 32;
+
+	MCDI_SET_DWORD(inbuf, MAC_STATS_IN_DMA_ADDR_LO, addr_lo);
+	MCDI_SET_DWORD(inbuf, MAC_STATS_IN_DMA_ADDR_HI, addr_hi);
+	cmd_ptr = (efx_dword_t *)MCDI_PTR(inbuf, MAC_STATS_IN_CMD);
+	if (enable)
+		EFX_POPULATE_DWORD_6(*cmd_ptr,
+				     MC_CMD_MAC_STATS_CMD_DMA, 1,
+				     MC_CMD_MAC_STATS_CMD_CLEAR, clear,
+				     MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE, 1,
+				     MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE, 1,
+				     MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR, 0,
+				     MC_CMD_MAC_STATS_CMD_PERIOD_MS, period);
+	else
+		EFX_POPULATE_DWORD_5(*cmd_ptr,
+				     MC_CMD_MAC_STATS_CMD_DMA, 0,
+				     MC_CMD_MAC_STATS_CMD_CLEAR, clear,
+				     MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE, 1,
+				     MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE, 0,
+				     MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR, 0);
+	MCDI_SET_DWORD(inbuf, MAC_STATS_IN_DMA_LEN, dma_len);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_MAC_STATS, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: %s failed rc=%d\n",
+		__func__, enable ? "enable" : "disable", rc);
+	return rc;
+}
+
+static int efx_mcdi_mac_reconfigure(struct efx_nic *efx)
+{
+	int rc;
+
+	rc = efx_mcdi_set_mac(efx);
+	if (rc != 0)
+		return rc;
+
+	/* Restore the multicast hash registers. */
+	efx->type->push_multicast_hash(efx);
+
+	return 0;
+}
+
+
+static bool efx_mcdi_mac_check_fault(struct efx_nic *efx)
+{
+	u32 faults;
+	int rc = efx_mcdi_get_mac_faults(efx, &faults);
+	return (rc != 0) || (faults != 0);
+}
+
+
+struct efx_mac_operations efx_mcdi_mac_operations = {
+	.reconfigure	= efx_mcdi_mac_reconfigure,
+	.update_stats	= efx_port_dummy_op_void,
+	.check_fault 	= efx_mcdi_mac_check_fault,
+};
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
new file mode 100644
index 0000000..2a85360
--- /dev/null
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -0,0 +1,1578 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+
+#ifndef MCDI_PCOL_H
+#define MCDI_PCOL_H
+
+/* Values to be written into FMCR_CZ_RESET_STATE_REG to control boot. */
+/* Power-on reset state */
+#define MC_FW_STATE_POR (1)
+/* If this is set in MC_RESET_STATE_REG then it should be
+ * possible to jump into IMEM without loading code from flash. */
+#define MC_FW_WARM_BOOT_OK (2)
+/* The MC main image has started to boot. */
+#define MC_FW_STATE_BOOTING (4)
+/* The Scheduler has started. */
+#define MC_FW_STATE_SCHED (8)
+
+/* Values to be written to the per-port status dword in shared
+ * memory on reboot and assert */
+#define MC_STATUS_DWORD_REBOOT (0xb007b007)
+#define MC_STATUS_DWORD_ASSERT (0xdeaddead)
+
+/* The current version of the MCDI protocol.
+ *
+ * Note that the ROM burnt into the card only talks V0, so at the very
+ * least every driver must support version 0 and MCDI_PCOL_VERSION
+ */
+#define MCDI_PCOL_VERSION 1
+
+/**
+ * MCDI version 1
+ *
+ * Each MCDI request starts with an MCDI_HEADER, which is a 32byte
+ * structure, filled in by the client.
+ *
+ *       0       7  8     16    20     22  23  24    31
+ *      | CODE | R | LEN | SEQ | Rsvd | E | R | XFLAGS |
+ *               |                      |   |
+ *               |                      |   \--- Response
+ *               |                      \------- Error
+ *               \------------------------------ Resync (always set)
+ *
+ * The client writes it's request into MC shared memory, and rings the
+ * doorbell. Each request is completed by either by the MC writting
+ * back into shared memory, or by writting out an event.
+ *
+ * All MCDI commands support completion by shared memory response. Each
+ * request may also contain additional data (accounted for by HEADER.LEN),
+ * and some response's may also contain additional data (again, accounted
+ * for by HEADER.LEN).
+ *
+ * Some MCDI commands support completion by event, in which any associated
+ * response data is included in the event.
+ *
+ * The protocol requires one response to be delivered for every request, a
+ * request should not be sent unless the response for the previous request
+ * has been received (either by polling shared memory, or by receiving
+ * an event).
+ */
+
+/** Request/Response structure */
+#define MCDI_HEADER_OFST 0
+#define MCDI_HEADER_CODE_LBN 0
+#define MCDI_HEADER_CODE_WIDTH 7
+#define MCDI_HEADER_RESYNC_LBN 7
+#define MCDI_HEADER_RESYNC_WIDTH 1
+#define MCDI_HEADER_DATALEN_LBN 8
+#define MCDI_HEADER_DATALEN_WIDTH 8
+#define MCDI_HEADER_SEQ_LBN 16
+#define MCDI_HEADER_RSVD_LBN 20
+#define MCDI_HEADER_RSVD_WIDTH 2
+#define MCDI_HEADER_SEQ_WIDTH 4
+#define MCDI_HEADER_ERROR_LBN 22
+#define MCDI_HEADER_ERROR_WIDTH 1
+#define MCDI_HEADER_RESPONSE_LBN 23
+#define MCDI_HEADER_RESPONSE_WIDTH 1
+#define MCDI_HEADER_XFLAGS_LBN 24
+#define MCDI_HEADER_XFLAGS_WIDTH 8
+/* Request response using event */
+#define MCDI_HEADER_XFLAGS_EVREQ 0x01
+
+/* Maximum number of payload bytes */
+#define MCDI_CTL_SDU_LEN_MAX 0xfc
+
+/* The MC can generate events for two reasons:
+ *   - To complete a shared memory request if XFLAGS_EVREQ was set
+ *   - As a notification (link state, i2c event), controlled
+ *     via MC_CMD_LOG_CTRL
+ *
+ * Both events share a common structure:
+ *
+ *  0      32     33      36    44     52     60
+ * | Data | Cont | Level | Src | Code | Rsvd |
+ *           |
+ *           \ There is another event pending in this notification
+ *
+ * If Code==CMDDONE, then the fields are further interpreted as:
+ *
+ *   - LEVEL==INFO    Command succeded
+ *   - LEVEL==ERR     Command failed
+ *
+ *    0     8         16      24     32
+ *   | Seq | Datalen | Errno | Rsvd |
+ *
+ *   These fields are taken directly out of the standard MCDI header, i.e.,
+ *   LEVEL==ERR, Datalen == 0 => Reboot
+ *
+ * Events can be squirted out of the UART (using LOG_CTRL) without a
+ * MCDI header.  An event can be distinguished from a MCDI response by
+ * examining the first byte which is 0xc0.  This corresponds to the
+ * non-existent MCDI command MC_CMD_DEBUG_LOG.
+ *
+ *      0         7        8
+ *     | command | Resync |     = 0xc0
+ *
+ * Since the event is written in big-endian byte order, this works
+ * providing bits 56-63 of the event are 0xc0.
+ *
+ *      56     60  63
+ *     | Rsvd | Code |    = 0xc0
+ *
+ * Which means for convenience the event code is 0xc for all MC
+ * generated events.
+ */
+#define FSE_AZ_EV_CODE_MCDI_EVRESPONSE 0xc
+
+#define MCDI_EVENT_DATA_LBN 0
+#define MCDI_EVENT_DATA_WIDTH 32
+#define MCDI_EVENT_CONT_LBN 32
+#define MCDI_EVENT_CONT_WIDTH 1
+#define MCDI_EVENT_LEVEL_LBN 33
+#define MCDI_EVENT_LEVEL_WIDTH 3
+#define MCDI_EVENT_LEVEL_INFO (0)
+#define MCDI_EVENT_LEVEL_WARN (1)
+#define MCDI_EVENT_LEVEL_ERR (2)
+#define MCDI_EVENT_LEVEL_FATAL (3)
+#define MCDI_EVENT_SRC_LBN 36
+#define MCDI_EVENT_SRC_WIDTH 8
+#define MCDI_EVENT_CODE_LBN 44
+#define MCDI_EVENT_CODE_WIDTH 8
+#define MCDI_EVENT_CODE_BADSSERT (1)
+#define MCDI_EVENT_CODE_PMNOTICE (2)
+#define MCDI_EVENT_CODE_CMDDONE (3)
+#define  MCDI_EVENT_CMDDONE_SEQ_LBN 0
+#define  MCDI_EVENT_CMDDONE_SEQ_WIDTH 8
+#define  MCDI_EVENT_CMDDONE_DATALEN_LBN 8
+#define  MCDI_EVENT_CMDDONE_DATALEN_WIDTH 8
+#define  MCDI_EVENT_CMDDONE_ERRNO_LBN 16
+#define  MCDI_EVENT_CMDDONE_ERRNO_WIDTH 8
+#define MCDI_EVENT_CODE_LINKCHANGE (4)
+#define  MCDI_EVENT_LINKCHANGE_LP_CAP_LBN 0
+#define  MCDI_EVENT_LINKCHANGE_LP_CAP_WIDTH 16
+#define  MCDI_EVENT_LINKCHANGE_SPEED_LBN 16
+#define  MCDI_EVENT_LINKCHANGE_SPEED_WIDTH 4
+#define  MCDI_EVENT_LINKCHANGE_SPEED_100M 1
+#define  MCDI_EVENT_LINKCHANGE_SPEED_1G 2
+#define  MCDI_EVENT_LINKCHANGE_SPEED_10G 3
+#define  MCDI_EVENT_LINKCHANGE_FCNTL_LBN 20
+#define  MCDI_EVENT_LINKCHANGE_FCNTL_WIDTH 4
+#define  MCDI_EVENT_LINKCHANGE_LINK_FLAGS_LBN 24
+#define  MCDI_EVENT_LINKCHANGE_LINK_FLAGS_WIDTH 8
+#define MCDI_EVENT_CODE_SENSOREVT (5)
+#define  MCDI_EVENT_SENSOREVT_MONITOR_LBN 0
+#define  MCDI_EVENT_SENSOREVT_MONITOR_WIDTH 8
+#define  MCDI_EVENT_SENSOREVT_STATE_LBN 8
+#define  MCDI_EVENT_SENSOREVT_STATE_WIDTH 8
+#define  MCDI_EVENT_SENSOREVT_VALUE_LBN 16
+#define  MCDI_EVENT_SENSOREVT_VALUE_WIDTH 16
+#define MCDI_EVENT_CODE_SCHEDERR (6)
+#define MCDI_EVENT_CODE_REBOOT (7)
+#define MCDI_EVENT_CODE_MAC_STATS_DMA (8)
+#define  MCDI_EVENT_MAC_STATS_DMA_GENERATION_LBN 0
+#define  MCDI_EVENT_MAC_STATS_DMA_GENERATION_WIDTH 32
+
+/* Non-existent command target */
+#define MC_CMD_ERR_ENOENT 2
+/* assert() has killed the MC */
+#define MC_CMD_ERR_EINTR 4
+/* Caller does not hold required locks */
+#define MC_CMD_ERR_EACCES 13
+/* Resource is currently unavailable (e.g. lock contention) */
+#define MC_CMD_ERR_EBUSY 16
+/* Invalid argument to target */
+#define MC_CMD_ERR_EINVAL 22
+/* Non-recursive resource is already acquired */
+#define MC_CMD_ERR_EDEADLK 35
+/* Operation not implemented */
+#define MC_CMD_ERR_ENOSYS 38
+/* Operation timed out */
+#define MC_CMD_ERR_ETIME 62
+
+#define MC_CMD_ERR_CODE_OFST 0
+
+
+/* MC_CMD_READ32: (debug, variadic out)
+ * Read multiple 32byte words from MC memory
+ */
+#define MC_CMD_READ32 0x01
+#define MC_CMD_READ32_IN_LEN 8
+#define MC_CMD_READ32_IN_ADDR_OFST 0
+#define MC_CMD_READ32_IN_NUMWORDS_OFST 4
+#define MC_CMD_READ32_OUT_LEN(_numwords) \
+	(4 * (_numwords))
+#define MC_CMD_READ32_OUT_BUFFER_OFST 0
+
+/* MC_CMD_WRITE32: (debug, variadic in)
+ * Write multiple 32byte words to MC memory
+ */
+#define MC_CMD_WRITE32 0x02
+#define MC_CMD_WRITE32_IN_LEN(_numwords) (((_numwords) * 4) + 4)
+#define MC_CMD_WRITE32_IN_ADDR_OFST 0
+#define MC_CMD_WRITE32_IN_BUFFER_OFST 4
+#define MC_CMD_WRITE32_OUT_LEN 0
+
+/* MC_CMD_COPYCODE: (debug)
+ * Copy MC code between two locations and jump
+ */
+#define MC_CMD_COPYCODE 0x03
+#define MC_CMD_COPYCODE_IN_LEN 16
+#define MC_CMD_COPYCODE_IN_SRC_ADDR_OFST 0
+#define MC_CMD_COPYCODE_IN_DEST_ADDR_OFST 4
+#define MC_CMD_COPYCODE_IN_NUMWORDS_OFST 8
+#define MC_CMD_COPYCODE_IN_JUMP_OFST 12
+/* Control should return to the caller rather than jumping */
+#define MC_CMD_COPYCODE_JUMP_NONE 1
+#define MC_CMD_COPYCODE_OUT_LEN 0
+
+/* MC_CMD_SET_FUNC: (debug)
+ * Select function for function-specific commands.
+ */
+#define MC_CMD_SET_FUNC 0x04
+#define MC_CMD_SET_FUNC_IN_LEN 4
+#define MC_CMD_SET_FUNC_IN_FUNC_OFST 0
+#define MC_CMD_SET_FUNC_OUT_LEN 0
+
+/* MC_CMD_GET_BOOT_STATUS:
+ * Get the instruction address from which the MC booted.
+ */
+#define MC_CMD_GET_BOOT_STATUS 0x05
+#define MC_CMD_GET_BOOT_STATUS_IN_LEN 0
+#define MC_CMD_GET_BOOT_STATUS_OUT_LEN 8
+#define MC_CMD_GET_BOOT_STATUS_OUT_BOOT_OFFSET_OFST 0
+#define MC_CMD_GET_BOOT_STATUS_OUT_FLAGS_OFST 4
+/* Reboot caused by watchdog */
+#define MC_CMD_GET_BOOT_STATUS_FLAGS_WATCHDOG_LBN   (0)
+#define MC_CMD_GET_BOOT_STATUS_FLAGS_WATCHDOG_WIDTH (1)
+/* MC booted from primary flash partition */
+#define MC_CMD_GET_BOOT_STATUS_FLAGS_PRIMARY_LBN    (1)
+#define MC_CMD_GET_BOOT_STATUS_FLAGS_PRIMARY_WIDTH  (1)
+/* MC booted from backup flash partition */
+#define MC_CMD_GET_BOOT_STATUS_FLAGS_BACKUP_LBN     (2)
+#define MC_CMD_GET_BOOT_STATUS_FLAGS_BACKUP_WIDTH   (1)
+
+/* MC_CMD_GET_ASSERTS: (debug, variadic out)
+ * Get (and optionally clear) the current assertion status.
+ *
+ * Only OUT.GLOBAL_FLAGS is guaranteed to exist in the completion
+ * payload. The other fields will only be present if
+ * OUT.GLOBAL_FLAGS != NO_FAILS
+ */
+#define MC_CMD_GET_ASSERTS 0x06
+#define MC_CMD_GET_ASSERTS_IN_LEN 4
+#define MC_CMD_GET_ASSERTS_IN_CLEAR_OFST 0
+#define MC_CMD_GET_ASSERTS_OUT_LEN 140
+/* Assertion status flag */
+#define MC_CMD_GET_ASSERTS_OUT_GLOBAL_FLAGS_OFST 0
+/*! No assertions have failed. */
+#define MC_CMD_GET_ASSERTS_FLAGS_NO_FAILS 1
+/*! A system-level assertion has failed. */
+#define MC_CMD_GET_ASSERTS_FLAGS_SYS_FAIL 2
+/*! A thread-level assertion has failed. */
+#define MC_CMD_GET_ASSERTS_FLAGS_THR_FAIL 3
+/*! The system was reset by the watchdog. */
+#define MC_CMD_GET_ASSERTS_FLAGS_WDOG_FIRED 4
+/* Failing PC value */
+#define MC_CMD_GET_ASSERTS_OUT_SAVED_PC_OFFS_OFST 4
+/* Saved GP regs */
+#define MC_CMD_GET_ASSERTS_OUT_GP_REGS_OFFS_OFST 8
+#define MC_CMD_GET_ASSERTS_OUT_GP_REGS_LEN 124
+/* Failing thread address */
+#define MC_CMD_GET_ASSERTS_OUT_THREAD_OFFS_OFST 132
+
+/* MC_CMD_LOG_CTRL:
+ * Determine the output stream for various events and messages
+ */
+#define MC_CMD_LOG_CTRL 0x07
+#define MC_CMD_LOG_CTRL_IN_LEN 8
+#define MC_CMD_LOG_CTRL_IN_LOG_DEST_OFST 0
+#define MC_CMD_LOG_CTRL_IN_LOG_DEST_UART (1)
+#define MC_CMD_LOG_CTRL_IN_LOG_DEST_EVQ (2)
+#define MC_CMD_LOG_CTRL_IN_LOG_DEST_EVQ_OFST 4
+#define MC_CMD_LOG_CTRL_OUT_LEN 0
+
+/* MC_CMD_GET_VERSION:
+ * Get version information about the MC firmware
+ */
+#define MC_CMD_GET_VERSION 0x08
+#define MC_CMD_GET_VERSION_IN_LEN 0
+#define MC_CMD_GET_VERSION_V0_OUT_LEN 4
+#define MC_CMD_GET_VERSION_V1_OUT_LEN 32
+#define MC_CMD_GET_VERSION_OUT_FIRMWARE_OFST 0
+/* Reserved version number to indicate "any" version. */
+#define MC_CMD_GET_VERSION_OUT_FIRMWARE_ANY 0xffffffff
+/* The version response of a boot ROM awaiting rescue */
+#define MC_CMD_GET_VERSION_OUT_FIRMWARE_BOOTROM 0xb0070000
+#define MC_CMD_GET_VERSION_V1_OUT_PCOL_OFST 4
+/* 128bit mask of functions supported by the current firmware */
+#define MC_CMD_GET_VERSION_V1_OUT_SUPPORTED_FUNCS_OFST 8
+/* The command set exported by the boot ROM (MCDI v0) */
+#define MC_CMD_GET_VERSION_V0_SUPPORTED_FUNCS {		\
+	(1 << MC_CMD_READ32)	|			\
+	(1 << MC_CMD_WRITE32)	|			\
+	(1 << MC_CMD_COPYCODE)	|			\
+	(1 << MC_CMD_GET_VERSION),			\
+	0, 0, 0 }
+#define MC_CMD_GET_VERSION_OUT_VERSION_OFST 24
+
+/* Vectors in the boot ROM */
+/* Point to the copycode entry point. */
+#define MC_BOOTROM_COPYCODE_VEC (0x7f4)
+/* Points to the recovery mode entry point. */
+#define MC_BOOTROM_NOFLASH_VEC (0x7f8)
+
+/* Test execution limits */
+#define MC_TESTEXEC_VARIANT_COUNT 16
+#define MC_TESTEXEC_RESULT_COUNT 7
+
+/* MC_CMD_SET_TESTVARS: (debug, variadic in)
+ * Write variant words for test.
+ *
+ * The user supplies a bitmap of the variants they wish to set.
+ * They must ensure that IN.LEN >= 4 + 4 * ffs(BITMAP)
+ */
+#define MC_CMD_SET_TESTVARS 0x09
+#define MC_CMD_SET_TESTVARS_IN_LEN(_numwords)	\
+  (4 + 4*(_numwords))
+#define MC_CMD_SET_TESTVARS_IN_ARGS_BITMAP_OFST 0
+/* Up to MC_TESTEXEC_VARIANT_COUNT of 32byte words start here */
+#define MC_CMD_SET_TESTVARS_IN_ARGS_BUFFER_OFST 4
+#define MC_CMD_SET_TESTVARS_OUT_LEN 0
+
+/* MC_CMD_GET_TESTRCS: (debug, variadic out)
+ * Return result words from test.
+ */
+#define MC_CMD_GET_TESTRCS 0x0a
+#define MC_CMD_GET_TESTRCS_IN_LEN 4
+#define MC_CMD_GET_TESTRCS_IN_NUMWORDS_OFST 0
+#define MC_CMD_GET_TESTRCS_OUT_LEN(_numwords) \
+	(4 * (_numwords))
+#define MC_CMD_GET_TESTRCS_OUT_BUFFER_OFST 0
+
+/* MC_CMD_RUN_TEST: (debug)
+ * Run the test exported by this firmware image
+ */
+#define MC_CMD_RUN_TEST 0x0b
+#define MC_CMD_RUN_TEST_IN_LEN 0
+#define MC_CMD_RUN_TEST_OUT_LEN 0
+
+/* MC_CMD_CSR_READ32: (debug, variadic out)
+ * Read 32bit words from the indirect memory map
+ */
+#define MC_CMD_CSR_READ32 0x0c
+#define MC_CMD_CSR_READ32_IN_LEN 12
+#define MC_CMD_CSR_READ32_IN_ADDR_OFST 0
+#define MC_CMD_CSR_READ32_IN_STEP_OFST 4
+#define MC_CMD_CSR_READ32_IN_NUMWORDS_OFST 8
+#define MC_CMD_CSR_READ32_OUT_LEN(_numwords)	\
+	(((_numwords) * 4) + 4)
+/* IN.NUMWORDS of 32bit words start here */
+#define MC_CMD_CSR_READ32_OUT_BUFFER_OFST 0
+#define MC_CMD_CSR_READ32_OUT_IREG_STATUS_OFST(_numwords)	\
+	((_numwords) * 4)
+
+/* MC_CMD_CSR_WRITE32: (debug, variadic in)
+ * Write 32bit dwords to the indirect memory map
+ */
+#define MC_CMD_CSR_WRITE32 0x0d
+#define MC_CMD_CSR_WRITE32_IN_LEN(_numwords)	\
+	(((_numwords) * 4) + 8)
+#define MC_CMD_CSR_WRITE32_IN_ADDR_OFST 0
+#define MC_CMD_CSR_WRITE32_IN_STEP_OFST 4
+/* Multiple 32bit words of data to write start here */
+#define MC_CMD_CSR_WRITE32_IN_BUFFER_OFST 8
+#define MC_CMD_CSR_WRITE32_OUT_LEN 4
+#define MC_CMD_CSR_WRITE32_OUT_STATUS_OFST 0
+
+/* MC_CMD_JTAG_WORK: (debug, fpga only)
+ * Process JTAG work buffer for RBF acceleration.
+ *
+ *  Host: bit count, (up to) 32 words of data to clock out to JTAG
+ *   (bits 1,0=TMS,TDO for first bit; bits 3,2=TMS,TDO for second bit, etc.)
+ *  MC: bit count, (up to) 32 words of data clocked in from JTAG
+ *   (bit 0=TDI for first bit, bit 1=TDI for second bit, etc.; [31:16] unused)
+ */
+#define MC_CMD_JTAG_WORK 0x0e
+
+/* MC_CMD_STACKINFO: (debug, variadic out)
+ * Get stack information
+ *
+ * Host: nothing
+ * MC: (thread ptr, stack size, free space) for each thread in system
+ */
+#define MC_CMD_STACKINFO 0x0f
+
+/* MC_CMD_MDIO_READ:
+ * MDIO register read
+ */
+#define MC_CMD_MDIO_READ 0x10
+#define MC_CMD_MDIO_READ_IN_LEN 16
+#define MC_CMD_MDIO_READ_IN_BUS_OFST 0
+#define MC_CMD_MDIO_READ_IN_PRTAD_OFST 4
+#define MC_CMD_MDIO_READ_IN_DEVAD_OFST 8
+#define MC_CMD_MDIO_READ_IN_ADDR_OFST 12
+#define MC_CMD_MDIO_READ_OUT_LEN 8
+#define MC_CMD_MDIO_READ_OUT_VALUE_OFST 0
+#define MC_CMD_MDIO_READ_OUT_STATUS_OFST 4
+
+/* MC_CMD_MDIO_WRITE:
+ * MDIO register write
+ */
+#define MC_CMD_MDIO_WRITE 0x11
+#define MC_CMD_MDIO_WRITE_IN_LEN 20
+#define MC_CMD_MDIO_WRITE_IN_BUS_OFST 0
+#define MC_CMD_MDIO_WRITE_IN_PRTAD_OFST 4
+#define MC_CMD_MDIO_WRITE_IN_DEVAD_OFST 8
+#define MC_CMD_MDIO_WRITE_IN_ADDR_OFST 12
+#define MC_CMD_MDIO_WRITE_IN_VALUE_OFST 16
+#define MC_CMD_MDIO_WRITE_OUT_LEN 4
+#define MC_CMD_MDIO_WRITE_OUT_STATUS_OFST 0
+
+/* By default all the MCDI MDIO operations perform clause45 mode.
+ * If you want to use clause22 then set DEVAD = MC_CMD_MDIO_CLAUSE22.
+ */
+#define MC_CMD_MDIO_CLAUSE22 32
+
+/* There are two MDIO buses: one for the internal PHY, and one for external
+ * devices.
+ */
+#define MC_CMD_MDIO_BUS_INTERNAL 0
+#define MC_CMD_MDIO_BUS_EXTERNAL 1
+
+/* The MDIO commands return the raw status bits from the MDIO block.  A "good"
+ * transaction should have the DONE bit set and all other bits clear.
+ */
+#define MC_CMD_MDIO_STATUS_GOOD 0x08
+
+
+/* MC_CMD_DBI_WRITE: (debug)
+ * Write DBI register(s)
+ *
+ * Host: address, byte-enables (and VF selection, and cs2 flag),
+ *       value [,address ...]
+ * MC: nothing
+ */
+#define MC_CMD_DBI_WRITE 0x12
+#define MC_CMD_DBI_WRITE_IN_LEN(_numwords)		\
+	(12 * (_numwords))
+#define MC_CMD_DBI_WRITE_IN_ADDRESS_OFST(_word)		\
+	(((_word) * 12) + 0)
+#define MC_CMD_DBI_WRITE_IN_BYTE_MASK_OFST(_word)	\
+	(((_word) * 12) + 4)
+#define MC_CMD_DBI_WRITE_IN_VALUE_OFST(_word)		\
+	(((_word) * 12) + 8)
+#define MC_CMD_DBI_WRITE_OUT_LEN 0
+
+/* MC_CMD_DBI_READ: (debug)
+ * Read DBI register(s)
+ *
+ * Host: address, [,address ...]
+ * MC: value [,value ...]
+ * (note: this does not support reading from VFs, but is retained for backwards
+ * compatibility; see MC_CMD_DBI_READX below)
+ */
+#define MC_CMD_DBI_READ 0x13
+#define MC_CMD_DBI_READ_IN_LEN(_numwords)		\
+	(4 * (_numwords))
+#define MC_CMD_DBI_READ_OUT_LEN(_numwords)		\
+	(4 * (_numwords))
+
+/* MC_CMD_PORT_READ32: (debug)
+ * Read a 32-bit register from the indirect port register map.
+ *
+ * The port to access is implied by the Shared memory channel used.
+ */
+#define MC_CMD_PORT_READ32 0x14
+#define MC_CMD_PORT_READ32_IN_LEN 4
+#define MC_CMD_PORT_READ32_IN_ADDR_OFST 0
+#define MC_CMD_PORT_READ32_OUT_LEN 8
+#define MC_CMD_PORT_READ32_OUT_VALUE_OFST 0
+#define MC_CMD_PORT_READ32_OUT_STATUS_OFST 4
+
+/* MC_CMD_PORT_WRITE32: (debug)
+ * Write a 32-bit register to the indirect port register map.
+ *
+ * The port to access is implied by the Shared memory channel used.
+ */
+#define MC_CMD_PORT_WRITE32 0x15
+#define MC_CMD_PORT_WRITE32_IN_LEN 8
+#define MC_CMD_PORT_WRITE32_IN_ADDR_OFST 0
+#define MC_CMD_PORT_WRITE32_IN_VALUE_OFST 4
+#define MC_CMD_PORT_WRITE32_OUT_LEN 4
+#define MC_CMD_PORT_WRITE32_OUT_STATUS_OFST 0
+
+/* MC_CMD_PORT_READ128: (debug)
+ * Read a 128-bit register from indirect port register map
+ *
+ * The port to access is implied by the Shared memory channel used.
+ */
+#define MC_CMD_PORT_READ128 0x16
+#define MC_CMD_PORT_READ128_IN_LEN 4
+#define MC_CMD_PORT_READ128_IN_ADDR_OFST 0
+#define MC_CMD_PORT_READ128_OUT_LEN 20
+#define MC_CMD_PORT_READ128_OUT_VALUE_OFST 0
+#define MC_CMD_PORT_READ128_OUT_STATUS_OFST 16
+
+/* MC_CMD_PORT_WRITE128: (debug)
+ * Write a 128-bit register to indirect port register map.
+ *
+ * The port to access is implied by the Shared memory channel used.
+ */
+#define MC_CMD_PORT_WRITE128 0x17
+#define MC_CMD_PORT_WRITE128_IN_LEN 20
+#define MC_CMD_PORT_WRITE128_IN_ADDR_OFST 0
+#define MC_CMD_PORT_WRITE128_IN_VALUE_OFST 4
+#define MC_CMD_PORT_WRITE128_OUT_LEN 4
+#define MC_CMD_PORT_WRITE128_OUT_STATUS_OFST 0
+
+/* MC_CMD_GET_BOARD_CFG:
+ * Returns the MC firmware configuration structure
+ *
+ * The FW_SUBTYPE_LIST contains a 16-bit value for each of the 12 types of
+ * NVRAM area.  The values are defined in the firmware/mc/platform/<xxx>.c file
+ * for a specific board type, but otherwise have no meaning to the MC; they
+ * are used by the driver to manage selection of appropriate firmware updates.
+ */
+#define MC_CMD_GET_BOARD_CFG 0x18
+#define MC_CMD_GET_BOARD_CFG_IN_LEN 0
+#define MC_CMD_GET_BOARD_CFG_OUT_LEN 96
+#define MC_CMD_GET_BOARD_CFG_OUT_BOARD_TYPE_OFST 0
+#define MC_CMD_GET_BOARD_CFG_OUT_BOARD_NAME_OFST 4
+#define MC_CMD_GET_BOARD_CFG_OUT_BOARD_NAME_LEN 32
+#define MC_CMD_GET_BOARD_CFG_OUT_CAPABILITIES_PORT0_OFST 36
+#define MC_CMD_GET_BOARD_CFG_OUT_CAPABILITIES_PORT1_OFST 40
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_OFST 44
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT0_LEN 6
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1_OFST 50
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_ADDR_BASE_PORT1_LEN 6
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_COUNT_PORT0_OFST 56
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_COUNT_PORT1_OFST 60
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_STRIDE_PORT0_OFST 64
+#define MC_CMD_GET_BOARD_CFG_OUT_MAC_STRIDE_PORT1_OFST 68
+#define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_OFST 72
+#define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN 24
+
+/* MC_CMD_DBI_READX: (debug)
+ * Read DBI register(s) -- extended functionality
+ *
+ * Host: vf selection, address, [,vf selection ...]
+ * MC: value [,value ...]
+ */
+#define MC_CMD_DBI_READX 0x19
+#define MC_CMD_DBI_READX_IN_LEN(_numwords)	\
+  (8*(_numwords))
+#define MC_CMD_DBI_READX_OUT_LEN(_numwords)	\
+  (4*(_numwords))
+
+/* MC_CMD_SET_RAND_SEED:
+ * Set the 16byte seed for the MC psuedo-random generator
+ */
+#define MC_CMD_SET_RAND_SEED 0x1a
+#define MC_CMD_SET_RAND_SEED_IN_LEN 16
+#define MC_CMD_SET_RAND_SEED_IN_SEED_OFST 0
+#define MC_CMD_SET_RAND_SEED_OUT_LEN 0
+
+/* MC_CMD_LTSSM_HIST: (debug)
+ * Retrieve the history of the LTSSM, if the build supports it.
+ *
+ * Host: nothing
+ * MC: variable number of LTSSM values, as bytes
+ * The history is read-to-clear.
+ */
+#define MC_CMD_LTSSM_HIST 0x1b
+
+/* MC_CMD_DRV_ATTACH:
+ * Inform MCPU that this port is managed on the host (i.e. driver active)
+ */
+#define MC_CMD_DRV_ATTACH 0x1c
+#define MC_CMD_DRV_ATTACH_IN_LEN 8
+#define MC_CMD_DRV_ATTACH_IN_NEW_STATE_OFST 0
+#define MC_CMD_DRV_ATTACH_IN_UPDATE_OFST 4
+#define MC_CMD_DRV_ATTACH_OUT_LEN 4
+#define MC_CMD_DRV_ATTACH_OUT_OLD_STATE_OFST 0
+
+/* MC_CMD_NCSI_PROD: (debug)
+ * Trigger an NC-SI event (and possibly an AEN in response)
+ */
+#define MC_CMD_NCSI_PROD 0x1d
+#define MC_CMD_NCSI_PROD_IN_LEN 4
+#define MC_CMD_NCSI_PROD_IN_EVENTS_OFST 0
+#define MC_CMD_NCSI_PROD_LINKCHANGE_LBN 0
+#define MC_CMD_NCSI_PROD_LINKCHANGE_WIDTH 1
+#define MC_CMD_NCSI_PROD_RESET_LBN 1
+#define MC_CMD_NCSI_PROD_RESET_WIDTH 1
+#define MC_CMD_NCSI_PROD_DRVATTACH_LBN 2
+#define MC_CMD_NCSI_PROD_DRVATTACH_WIDTH 1
+#define MC_CMD_NCSI_PROD_OUT_LEN 0
+
+/* Enumeration */
+#define MC_CMD_NCSI_PROD_LINKCHANGE 0
+#define MC_CMD_NCSI_PROD_RESET 1
+#define MC_CMD_NCSI_PROD_DRVATTACH 2
+
+/* MC_CMD_DEVEL: (debug)
+ * Reserved for development
+ */
+#define MC_CMD_DEVEL 0x1e
+
+/* MC_CMD_SHMUART: (debug)
+ * Route UART output to circular buffer in shared memory instead.
+ */
+#define MC_CMD_SHMUART 0x1f
+#define MC_CMD_SHMUART_IN_FLAG_OFST 0
+#define MC_CMD_SHMUART_IN_LEN 4
+#define MC_CMD_SHMUART_OUT_LEN 0
+
+/* MC_CMD_PORT_RESET:
+ * Generic per-port reset. There is no equivalent for per-board reset.
+ *
+ * Locks required: None
+ * Return code: 0, ETIME
+ */
+#define MC_CMD_PORT_RESET 0x20
+#define MC_CMD_PORT_RESET_IN_LEN 0
+#define MC_CMD_PORT_RESET_OUT_LEN 0
+
+/* MC_CMD_RESOURCE_LOCK:
+ * Generic resource lock/unlock interface.
+ *
+ * Locks required: None
+ * Return code: 0,
+ *              EBUSY (if trylock is contended by other port),
+ *              EDEADLK (if trylock is already acquired by this port)
+ *              EINVAL (if unlock doesn't own the lock)
+ */
+#define MC_CMD_RESOURCE_LOCK 0x21
+#define MC_CMD_RESOURCE_LOCK_IN_LEN 8
+#define MC_CMD_RESOURCE_LOCK_IN_ACTION_OFST 0
+#define MC_CMD_RESOURCE_LOCK_ACTION_TRYLOCK 1
+#define MC_CMD_RESOURCE_LOCK_ACTION_UNLOCK 0
+#define MC_CMD_RESOURCE_LOCK_IN_RESOURCE_OFST 4
+#define MC_CMD_RESOURCE_LOCK_I2C 2
+#define MC_CMD_RESOURCE_LOCK_PHY 3
+#define MC_CMD_RESOURCE_LOCK_OUT_LEN 0
+
+/* MC_CMD_SPI_COMMAND: (variadic in, variadic out)
+ * Read/Write to/from the SPI device.
+ *
+ * Locks required: SPI_LOCK
+ * Return code: 0, ETIME, EINVAL, EACCES (if SPI_LOCK is not held)
+ */
+#define MC_CMD_SPI_COMMAND 0x22
+#define MC_CMD_SPI_COMMAND_IN_LEN(_write_bytes)	(12 + (_write_bytes))
+#define MC_CMD_SPI_COMMAND_IN_ARGS_OFST 0
+#define MC_CMD_SPI_COMMAND_IN_ARGS_ADDRESS_OFST 0
+#define MC_CMD_SPI_COMMAND_IN_ARGS_READ_BYTES_OFST 4
+#define MC_CMD_SPI_COMMAND_IN_ARGS_CHIP_SELECT_OFST 8
+/* Data to write here */
+#define MC_CMD_SPI_COMMAND_IN_WRITE_BUFFER_OFST 12
+#define MC_CMD_SPI_COMMAND_OUT_LEN(_read_bytes) (_read_bytes)
+/* Data read here */
+#define MC_CMD_SPI_COMMAND_OUT_READ_BUFFER_OFST 0
+
+/* MC_CMD_I2C_READ_WRITE: (variadic in, variadic out)
+ * Read/Write to/from the I2C bus.
+ *
+ * Locks required: I2C_LOCK
+ * Return code: 0, ETIME, EINVAL, EACCES (if I2C_LOCK is not held)
+ */
+#define MC_CMD_I2C_RW 0x23
+#define MC_CMD_I2C_RW_IN_LEN(_write_bytes) (8 + (_write_bytes))
+#define MC_CMD_I2C_RW_IN_ARGS_OFST 0
+#define MC_CMD_I2C_RW_IN_ARGS_ADDR_OFST 0
+#define MC_CMD_I2C_RW_IN_ARGS_READ_BYTES_OFST 4
+/* Data to write here */
+#define MC_CMD_I2C_RW_IN_WRITE_BUFFER_OFSET 8
+#define MC_CMD_I2C_RW_OUT_LEN(_read_bytes) (_read_bytes)
+/* Data read here */
+#define MC_CMD_I2C_RW_OUT_READ_BUFFER_OFST 0
+
+/* Generic phy capability bitmask */
+#define MC_CMD_PHY_CAP_10HDX_LBN 1
+#define MC_CMD_PHY_CAP_10HDX_WIDTH 1
+#define MC_CMD_PHY_CAP_10FDX_LBN 2
+#define MC_CMD_PHY_CAP_10FDX_WIDTH 1
+#define MC_CMD_PHY_CAP_100HDX_LBN 3
+#define MC_CMD_PHY_CAP_100HDX_WIDTH 1
+#define MC_CMD_PHY_CAP_100FDX_LBN 4
+#define MC_CMD_PHY_CAP_100FDX_WIDTH 1
+#define MC_CMD_PHY_CAP_1000HDX_LBN 5
+#define MC_CMD_PHY_CAP_1000HDX_WIDTH 1
+#define MC_CMD_PHY_CAP_1000FDX_LBN 6
+#define MC_CMD_PHY_CAP_1000FDX_WIDTH 1
+#define MC_CMD_PHY_CAP_10000FDX_LBN 7
+#define MC_CMD_PHY_CAP_10000FDX_WIDTH 1
+#define MC_CMD_PHY_CAP_PAUSE_LBN 8
+#define MC_CMD_PHY_CAP_PAUSE_WIDTH 1
+#define MC_CMD_PHY_CAP_ASYM_LBN 9
+#define MC_CMD_PHY_CAP_ASYM_WIDTH 1
+#define MC_CMD_PHY_CAP_AN_LBN 10
+#define MC_CMD_PHY_CAP_AN_WIDTH 1
+
+/* Generic loopback enumeration */
+#define MC_CMD_LOOPBACK_NONE 0
+#define MC_CMD_LOOPBACK_DATA 1
+#define MC_CMD_LOOPBACK_GMAC 2
+#define MC_CMD_LOOPBACK_XGMII 3
+#define MC_CMD_LOOPBACK_XGXS 4
+#define MC_CMD_LOOPBACK_XAUI 5
+#define MC_CMD_LOOPBACK_GMII 6
+#define MC_CMD_LOOPBACK_SGMII 7
+#define MC_CMD_LOOPBACK_XGBR 8
+#define MC_CMD_LOOPBACK_XFI 9
+#define MC_CMD_LOOPBACK_XAUI_FAR 10
+#define MC_CMD_LOOPBACK_GMII_FAR 11
+#define MC_CMD_LOOPBACK_SGMII_FAR 12
+#define MC_CMD_LOOPBACK_XFI_FAR 13
+#define MC_CMD_LOOPBACK_GPHY 14
+#define MC_CMD_LOOPBACK_PHYXS 15
+#define MC_CMD_LOOPBACK_PCS 16
+#define MC_CMD_LOOPBACK_PMAPMD 17
+#define MC_CMD_LOOPBACK_XPORT 18
+#define MC_CMD_LOOPBACK_XGMII_WS 19
+#define MC_CMD_LOOPBACK_XAUI_WS 20
+#define MC_CMD_LOOPBACK_XAUI_WS_FAR 21
+#define MC_CMD_LOOPBACK_XAUI_WS_NEAR 22
+#define MC_CMD_LOOPBACK_GMII_WS 23
+#define MC_CMD_LOOPBACK_XFI_WS 24
+#define MC_CMD_LOOPBACK_XFI_WS_FAR 25
+#define MC_CMD_LOOPBACK_PHYXS_WS 26
+
+/* Generic PHY statistics enumeration */
+#define MC_CMD_OUI 0
+#define MC_CMD_PMA_PMD_LINK_UP 1
+#define MC_CMD_PMA_PMD_RX_FAULT 2
+#define MC_CMD_PMA_PMD_TX_FAULT 3
+#define MC_CMD_PMA_PMD_SIGNAL 4
+#define MC_CMD_PMA_PMD_SNR_A 5
+#define MC_CMD_PMA_PMD_SNR_B 6
+#define MC_CMD_PMA_PMD_SNR_C 7
+#define MC_CMD_PMA_PMD_SNR_D 8
+#define MC_CMD_PCS_LINK_UP 9
+#define MC_CMD_PCS_RX_FAULT 10
+#define MC_CMD_PCS_TX_FAULT 11
+#define MC_CMD_PCS_BER 12
+#define MC_CMD_PCS_BLOCK_ERRORS 13
+#define MC_CMD_PHYXS_LINK_UP 14
+#define MC_CMD_PHYXS_RX_FAULT 15
+#define MC_CMD_PHYXS_TX_FAULT 16
+#define MC_CMD_PHYXS_ALIGN 17
+#define MC_CMD_PHYXS_SYNC 18
+#define MC_CMD_AN_LINK_UP 19
+#define MC_CMD_AN_COMPLETE 20
+#define MC_CMD_AN_10GBT_STATUS 21
+#define MC_CMD_CL22_LINK_UP 22
+#define MC_CMD_PHY_NSTATS 23
+
+/* MC_CMD_GET_PHY_CFG:
+ * Report PHY configuration.  This guarantees to succeed even if the PHY is in
+ * a "zombie" state.
+ *
+ * Locks required: None
+ * Return code: 0
+ */
+#define MC_CMD_GET_PHY_CFG 0x24
+
+#define MC_CMD_GET_PHY_CFG_IN_LEN 0
+#define MC_CMD_GET_PHY_CFG_OUT_LEN 72
+
+#define MC_CMD_GET_PHY_CFG_OUT_FLAGS_OFST 0
+#define MC_CMD_GET_PHY_CFG_PRESENT_LBN 0
+#define MC_CMD_GET_PHY_CFG_PRESENT_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_SHORTBIST_LBN 1
+#define MC_CMD_GET_PHY_CFG_SHORTBIST_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_LONGBIST_LBN 2
+#define MC_CMD_GET_PHY_CFG_LONGBIST_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_LOWPOWER_LBN 3
+#define MC_CMD_GET_PHY_CFG_LOWPOWER_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_POWEROFF_LBN 4
+#define MC_CMD_GET_PHY_CFG_POWEROFF_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_TXDIS_LBN 5
+#define MC_CMD_GET_PHY_CFG_TXDIS_WIDTH 1
+#define MC_CMD_GET_PHY_CFG_OUT_TYPE_OFST 4
+/* Bitmask of supported capabilities */
+#define MC_CMD_GET_PHY_CFG_OUT_SUPPORTED_CAP_OFST 8
+#define MC_CMD_GET_PHY_CFG_OUT_CHANNEL_OFST 12
+#define MC_CMD_GET_PHY_CFG_OUT_PRT_OFST 16
+/* PHY statistics bitmap */
+#define MC_CMD_GET_PHY_CFG_OUT_STATS_MASK_OFST 20
+/* PHY type/name string */
+#define MC_CMD_GET_PHY_CFG_OUT_NAME_OFST 24
+#define MC_CMD_GET_PHY_CFG_OUT_NAME_LEN 20
+#define MC_CMD_GET_PHY_CFG_OUT_MEDIA_TYPE_OFST 44
+#define MC_CMD_MEDIA_XAUI 1
+#define MC_CMD_MEDIA_CX4 2
+#define MC_CMD_MEDIA_KX4 3
+#define MC_CMD_MEDIA_XFP 4
+#define MC_CMD_MEDIA_SFP_PLUS 5
+#define MC_CMD_MEDIA_BASE_T 6
+/* MDIO "MMDS" supported */
+#define MC_CMD_GET_PHY_CFG_OUT_MMD_MASK_OFST 48
+/* Native clause 22 */
+#define MC_CMD_MMD_CLAUSE22  0
+#define MC_CMD_MMD_CLAUSE45_PMAPMD 1
+#define MC_CMD_MMD_CLAUSE45_WIS 2
+#define MC_CMD_MMD_CLAUSE45_PCS 3
+#define MC_CMD_MMD_CLAUSE45_PHYXS 4
+#define MC_CMD_MMD_CLAUSE45_DTEXS 5
+#define MC_CMD_MMD_CLAUSE45_TC 6
+#define MC_CMD_MMD_CLAUSE45_AN 7
+/* Clause22 proxied over clause45 by PHY */
+#define MC_CMD_MMD_CLAUSE45_C22EXT 29
+#define MC_CMD_MMD_CLAUSE45_VEND1 30
+#define MC_CMD_MMD_CLAUSE45_VEND2 31
+/* PHY stepping version */
+#define MC_CMD_GET_PHY_CFG_OUT_REVISION_OFST 52
+#define MC_CMD_GET_PHY_CFG_OUT_REVISION_LEN 20
+
+/* MC_CMD_START_PHY_BIST:
+ * Start a BIST test on the PHY.
+ *
+ * Locks required: PHY_LOCK if doing a  PHY BIST
+ * Return code: 0, EINVAL, EACCES (if PHY_LOCK is not held)
+ */
+#define MC_CMD_START_BIST 0x25
+#define MC_CMD_START_BIST_IN_LEN 4
+#define MC_CMD_START_BIST_TYPE_OFST 0
+
+/* Run the PHY's short BIST */
+#define MC_CMD_PHY_BIST_SHORT  1
+/* Run the PHY's long BIST */
+#define MC_CMD_PHY_BIST_LONG   2
+/* Run BIST on the currently selected BPX Serdes (XAUI or XFI) */
+#define MC_CMD_BPX_SERDES_BIST 3
+
+/* MC_CMD_POLL_PHY_BIST: (variadic output)
+ * Poll for BIST completion
+ *
+ * Returns a single status code, and a binary blob of phy-specific
+ * bist output. If the driver can't succesfully parse the BIST output,
+ * it should still respect the Pass/Fail in OUT.RESULT.
+ *
+ * Locks required: PHY_LOCK  if doing a  PHY BIST
+ * Return code: 0, EACCES (if PHY_LOCK is not held)
+ */
+#define MC_CMD_POLL_BIST 0x26
+#define MC_CMD_POLL_BIST_IN_LEN 0
+#define MC_CMD_POLL_BIST_OUT_LEN UNKNOWN
+#define MC_CMD_POLL_BIST_OUT_RESULT_OFST 0
+#define MC_CMD_POLL_BIST_RUNNING 1
+#define MC_CMD_POLL_BIST_PASSED 2
+#define MC_CMD_POLL_BIST_FAILED 3
+#define MC_CMD_POLL_BIST_TIMEOUT 4
+#define MC_CMD_POLL_BIST_OUT_PRIVATE_OFST 4
+
+/* MC_CMD_PHY_SPI: (variadic in, variadic out)
+ * Read/Write/Erase the PHY SPI device
+ *
+ * Locks required: PHY_LOCK
+ * Return code: 0, ETIME, EINVAL, EACCES (if PHY_LOCK is not held)
+ */
+#define MC_CMD_PHY_SPI 0x27
+#define MC_CMD_PHY_SPI_IN_LEN(_write_bytes) (12 + (_write_bytes))
+#define MC_CMD_PHY_SPI_IN_ARGS_OFST 0
+#define MC_CMD_PHY_SPI_IN_ARGS_ADDR_OFST 0
+#define MC_CMD_PHY_SPI_IN_ARGS_READ_BYTES_OFST 4
+#define MC_CMD_PHY_SPI_IN_ARGS_ERASE_ALL_OFST 8
+/* Data to write here */
+#define MC_CMD_PHY_SPI_IN_WRITE_BUFFER_OFSET 12
+#define MC_CMD_PHY_SPI_OUT_LEN(_read_bytes) (_read_bytes)
+/* Data read here */
+#define MC_CMD_PHY_SPI_OUT_READ_BUFFER_OFST 0
+
+
+/* MC_CMD_GET_LOOPBACK_MODES:
+ * Returns a bitmask of loopback modes evailable at each speed.
+ *
+ * Locks required: None
+ * Return code: 0
+ */
+#define MC_CMD_GET_LOOPBACK_MODES 0x28
+#define MC_CMD_GET_LOOPBACK_MODES_IN_LEN 0
+#define MC_CMD_GET_LOOPBACK_MODES_OUT_LEN 32
+#define MC_CMD_GET_LOOPBACK_MODES_100M_OFST 0
+#define MC_CMD_GET_LOOPBACK_MODES_1G_OFST 8
+#define MC_CMD_GET_LOOPBACK_MODES_10G_OFST 16
+#define MC_CMD_GET_LOOPBACK_MODES_SUGGESTED_OFST 24
+
+/* Flow control enumeration */
+#define MC_CMD_FCNTL_OFF 0
+#define MC_CMD_FCNTL_RESPOND 1
+#define MC_CMD_FCNTL_BIDIR 2
+/* Auto - Use what the link has autonegotiated
+ *      - The driver should modify the advertised capabilities via SET_LINK.CAP
+ *        to control the negotiated flow control mode.
+ *      - Can only be set if the PHY supports PAUSE+ASYM capabilities
+ *      - Never returned by GET_LINK as the value programmed into the MAC
+ */
+#define MC_CMD_FCNTL_AUTO 3
+
+/* Generic mac fault bitmask */
+#define MC_CMD_MAC_FAULT_XGMII_LOCAL_LBN 0
+#define MC_CMD_MAC_FAULT_XGMII_LOCAL_WIDTH 1
+#define MC_CMD_MAC_FAULT_XGMII_REMOTE_LBN 1
+#define MC_CMD_MAC_FAULT_XGMII_REMOTE_WIDTH 1
+#define MC_CMD_MAC_FAULT_SGMII_REMOTE_LBN 2
+#define MC_CMD_MAC_FAULT_SGMII_REMOTE_WIDTH 1
+
+/* MC_CMD_GET_LINK:
+ * Read the unified MAC/PHY link state
+ *
+ * Locks required: None
+ * Return code: 0, ETIME
+ */
+#define MC_CMD_GET_LINK 0x29
+#define MC_CMD_GET_LINK_IN_LEN 0
+#define MC_CMD_GET_LINK_OUT_LEN 28
+/* near-side and link-partner advertised capabilities */
+#define MC_CMD_GET_LINK_OUT_CAP_OFST 0
+#define MC_CMD_GET_LINK_OUT_LP_CAP_OFST 4
+/* Autonegotiated speed in mbit/s. The link may still be down
+ * even if this reads non-zero */
+#define MC_CMD_GET_LINK_OUT_LINK_SPEED_OFST 8
+#define MC_CMD_GET_LINK_OUT_LOOPBACK_MODE_OFST 12
+#define MC_CMD_GET_LINK_OUT_FLAGS_OFST 16
+/* Whether we have overall link up */
+#define MC_CMD_GET_LINK_LINK_UP_LBN 0
+#define MC_CMD_GET_LINK_LINK_UP_WIDTH 1
+#define MC_CMD_GET_LINK_FULL_DUPLEX_LBN 1
+#define MC_CMD_GET_LINK_FULL_DUPLEX_WIDTH 1
+/* Whether we have link at the layers provided by the BPX */
+#define MC_CMD_GET_LINK_BPX_LINK_LBN 2
+#define MC_CMD_GET_LINK_BPX_LINK_WIDTH 1
+/* Whether the PHY has external link */
+#define MC_CMD_GET_LINK_PHY_LINK_LBN 3
+#define MC_CMD_GET_LINK_PHY_LINK_WIDTH 1
+#define MC_CMD_GET_LINK_OUT_FCNTL_OFST 20
+#define MC_CMD_GET_LINK_OUT_MAC_FAULT_OFST 24
+
+/* MC_CMD_SET_LINK:
+ * Write the unified MAC/PHY link configuration
+ *
+ * A loopback speed of "0" is supported, and means
+ * (choose any available speed)
+ *
+ * Locks required: None
+ * Return code: 0, EINVAL, ETIME
+ */
+#define MC_CMD_SET_LINK 0x2a
+#define MC_CMD_SET_LINK_IN_LEN 16
+#define MC_CMD_SET_LINK_IN_CAP_OFST 0
+#define MC_CMD_SET_LINK_IN_FLAGS_OFST 4
+#define MC_CMD_SET_LINK_LOWPOWER_LBN 0
+#define MC_CMD_SET_LINK_LOWPOWER_WIDTH 1
+#define MC_CMD_SET_LINK_POWEROFF_LBN 1
+#define MC_CMD_SET_LINK_POWEROFF_WIDTH 1
+#define MC_CMD_SET_LINK_TXDIS_LBN 2
+#define MC_CMD_SET_LINK_TXDIS_WIDTH 1
+#define MC_CMD_SET_LINK_IN_LOOPBACK_MODE_OFST 8
+#define MC_CMD_SET_LINK_IN_LOOPBACK_SPEED_OFST 12
+#define MC_CMD_SET_LINK_OUT_LEN 0
+
+/* MC_CMD_SET_ID_LED:
+ * Set indentification LED state
+ *
+ * Locks required: None
+ * Return code: 0, EINVAL
+ */
+#define MC_CMD_SET_ID_LED 0x2b
+#define MC_CMD_SET_ID_LED_IN_LEN 4
+#define MC_CMD_SET_ID_LED_IN_STATE_OFST 0
+#define  MC_CMD_LED_OFF 0
+#define  MC_CMD_LED_ON 1
+#define  MC_CMD_LED_DEFAULT 2
+#define MC_CMD_SET_ID_LED_OUT_LEN 0
+
+/* MC_CMD_SET_MAC:
+ * Set MAC configuration
+ *
+ * The MTU is the MTU programmed directly into the XMAC/GMAC
+ * (inclusive of EtherII, VLAN, bug16011 padding)
+ *
+ * Locks required: None
+ * Return code: 0, EINVAL
+ */
+#define MC_CMD_SET_MAC 0x2c
+#define MC_CMD_SET_MAC_IN_LEN 24
+#define MC_CMD_SET_MAC_IN_MTU_OFST 0
+#define MC_CMD_SET_MAC_IN_DRAIN_OFST 4
+#define MC_CMD_SET_MAC_IN_ADDR_OFST 8
+#define MC_CMD_SET_MAC_IN_REJECT_OFST 16
+#define MC_CMD_SET_MAC_IN_REJECT_UNCST_LBN 0
+#define MC_CMD_SET_MAC_IN_REJECT_UNCST_WIDTH 1
+#define MC_CMD_SET_MAC_IN_REJECT_BRDCST_LBN 1
+#define MC_CMD_SET_MAC_IN_REJECT_BRDCST_WIDTH 1
+#define MC_CMD_SET_MAC_IN_FCNTL_OFST 20
+#define MC_CMD_SET_MAC_OUT_LEN 0
+
+/* MC_CMD_PHY_STATS:
+ * Get generic PHY statistics
+ *
+ * This call returns the statistics for a generic PHY, by direct DMA
+ * into host memory, in a sparse array (indexed by the enumerate).
+ * Each value is represented by a 32bit number.
+ *
+ * Locks required: None
+ * Returns: 0, ETIME
+ * Response methods: shared memory, event
+ */
+#define MC_CMD_PHY_STATS 0x2d
+#define MC_CMD_PHY_STATS_IN_LEN 8
+#define MC_CMD_PHY_STATS_IN_DMA_ADDR_LO_OFST 0
+#define MC_CMD_PHY_STATS_IN_DMA_ADDR_HI_OFST 4
+#define MC_CMD_PHY_STATS_OUT_LEN 0
+
+/* Unified MAC statistics enumeration */
+#define MC_CMD_MAC_GENERATION_START 0
+#define MC_CMD_MAC_TX_PKTS 1
+#define MC_CMD_MAC_TX_PAUSE_PKTS 2
+#define MC_CMD_MAC_TX_CONTROL_PKTS 3
+#define MC_CMD_MAC_TX_UNICAST_PKTS 4
+#define MC_CMD_MAC_TX_MULTICAST_PKTS 5
+#define MC_CMD_MAC_TX_BROADCAST_PKTS 6
+#define MC_CMD_MAC_TX_BYTES 7
+#define MC_CMD_MAC_TX_BAD_BYTES 8
+#define MC_CMD_MAC_TX_LT64_PKTS 9
+#define MC_CMD_MAC_TX_64_PKTS 10
+#define MC_CMD_MAC_TX_65_TO_127_PKTS 11
+#define MC_CMD_MAC_TX_128_TO_255_PKTS 12
+#define MC_CMD_MAC_TX_256_TO_511_PKTS 13
+#define MC_CMD_MAC_TX_512_TO_1023_PKTS 14
+#define MC_CMD_MAC_TX_1024_TO_15XX_PKTS 15
+#define MC_CMD_MAC_TX_15XX_TO_JUMBO_PKTS 16
+#define MC_CMD_MAC_TX_GTJUMBO_PKTS 17
+#define MC_CMD_MAC_TX_BAD_FCS_PKTS 18
+#define MC_CMD_MAC_TX_SINGLE_COLLISION_PKTS 19
+#define MC_CMD_MAC_TX_MULTIPLE_COLLISION_PKTS 20
+#define MC_CMD_MAC_TX_EXCESSIVE_COLLISION_PKTS 21
+#define MC_CMD_MAC_TX_LATE_COLLISION_PKTS 22
+#define MC_CMD_MAC_TX_DEFERRED_PKTS 23
+#define MC_CMD_MAC_TX_EXCESSIVE_DEFERRED_PKTS 24
+#define MC_CMD_MAC_TX_NON_TCPUDP_PKTS 25
+#define MC_CMD_MAC_TX_MAC_SRC_ERR_PKTS 26
+#define MC_CMD_MAC_TX_IP_SRC_ERR_PKTS 27
+#define MC_CMD_MAC_RX_PKTS 28
+#define MC_CMD_MAC_RX_PAUSE_PKTS 29
+#define MC_CMD_MAC_RX_GOOD_PKTS 30
+#define MC_CMD_MAC_RX_CONTROL_PKTS 31
+#define MC_CMD_MAC_RX_UNICAST_PKTS 32
+#define MC_CMD_MAC_RX_MULTICAST_PKTS 33
+#define MC_CMD_MAC_RX_BROADCAST_PKTS 34
+#define MC_CMD_MAC_RX_BYTES 35
+#define MC_CMD_MAC_RX_BAD_BYTES 36
+#define MC_CMD_MAC_RX_64_PKTS 37
+#define MC_CMD_MAC_RX_65_TO_127_PKTS 38
+#define MC_CMD_MAC_RX_128_TO_255_PKTS 39
+#define MC_CMD_MAC_RX_256_TO_511_PKTS 40
+#define MC_CMD_MAC_RX_512_TO_1023_PKTS 41
+#define MC_CMD_MAC_RX_1024_TO_15XX_PKTS 42
+#define MC_CMD_MAC_RX_15XX_TO_JUMBO_PKTS 43
+#define MC_CMD_MAC_RX_GTJUMBO_PKTS 44
+#define MC_CMD_MAC_RX_UNDERSIZE_PKTS 45
+#define MC_CMD_MAC_RX_BAD_FCS_PKTS 46
+#define MC_CMD_MAC_RX_OVERFLOW_PKTS 47
+#define MC_CMD_MAC_RX_FALSE_CARRIER_PKTS 48
+#define MC_CMD_MAC_RX_SYMBOL_ERROR_PKTS 49
+#define MC_CMD_MAC_RX_ALIGN_ERROR_PKTS 50
+#define MC_CMD_MAC_RX_LENGTH_ERROR_PKTS 51
+#define MC_CMD_MAC_RX_INTERNAL_ERROR_PKTS 52
+#define MC_CMD_MAC_RX_JABBER_PKTS 53
+#define MC_CMD_MAC_RX_NODESC_DROPS 54
+#define MC_CMD_MAC_RX_LANES01_CHAR_ERR 55
+#define MC_CMD_MAC_RX_LANES23_CHAR_ERR 56
+#define MC_CMD_MAC_RX_LANES01_DISP_ERR 57
+#define MC_CMD_MAC_RX_LANES23_DISP_ERR 58
+#define MC_CMD_MAC_RX_MATCH_FAULT 59
+/* Insert new members here. */
+#define MC_CMD_MAC_GENERATION_END 60
+#define MC_CMD_MAC_NSTATS (MC_CMD_MAC_GENERATION_END+1)
+
+/* MC_CMD_MAC_STATS:
+ * Get unified GMAC/XMAC statistics
+ *
+ * This call returns unified statistics maintained by the MC as it
+ * switches between the GMAC and XMAC. The MC will write out all
+ * supported stats.  The driver should zero initialise the buffer to
+ * guarantee consistent results.
+ *
+ * Locks required: None
+ * Returns: 0
+ * Response methods: shared memory, event
+ */
+#define MC_CMD_MAC_STATS 0x2e
+#define MC_CMD_MAC_STATS_IN_LEN 16
+#define MC_CMD_MAC_STATS_IN_DMA_ADDR_LO_OFST 0
+#define MC_CMD_MAC_STATS_IN_DMA_ADDR_HI_OFST 4
+#define MC_CMD_MAC_STATS_IN_CMD_OFST 8
+#define MC_CMD_MAC_STATS_CMD_DMA_LBN 0
+#define MC_CMD_MAC_STATS_CMD_DMA_WIDTH 1
+#define MC_CMD_MAC_STATS_CMD_CLEAR_LBN 1
+#define MC_CMD_MAC_STATS_CMD_CLEAR_WIDTH 1
+#define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_LBN 2
+#define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_WIDTH 1
+/* Fields only relevent when PERIODIC_CHANGE is set */
+#define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_LBN 3
+#define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_WIDTH 1
+#define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_LBN 4
+#define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_WIDTH 1
+#define MC_CMD_MAC_STATS_CMD_PERIOD_MS_LBN 16
+#define MC_CMD_MAC_STATS_CMD_PERIOD_MS_WIDTH 16
+#define MC_CMD_MAC_STATS_IN_DMA_LEN_OFST 12
+
+#define MC_CMD_MAC_STATS_OUT_LEN 0
+
+/* Callisto flags */
+#define MC_CMD_SFT9001_ROBUST_LBN 0
+#define MC_CMD_SFT9001_ROBUST_WIDTH 1
+#define MC_CMD_SFT9001_SHORT_REACH_LBN 1
+#define MC_CMD_SFT9001_SHORT_REACH_WIDTH 1
+
+/* MC_CMD_SFT9001_GET:
+ * Read current callisto specific setting
+ *
+ * Locks required: None
+ * Returns: 0, ETIME
+ */
+#define MC_CMD_SFT9001_GET 0x30
+#define MC_CMD_SFT9001_GET_IN_LEN 0
+#define MC_CMD_SFT9001_GET_OUT_LEN 4
+#define MC_CMD_SFT9001_GET_OUT_FLAGS_OFST 0
+
+/* MC_CMD_SFT9001_SET:
+ * Write current callisto specific setting
+ *
+ * Locks required: None
+ * Returns: 0, ETIME, EINVAL
+ */
+#define MC_CMD_SFT9001_SET 0x31
+#define MC_CMD_SFT9001_SET_IN_LEN 4
+#define MC_CMD_SFT9001_SET_IN_FLAGS_OFST 0
+#define MC_CMD_SFT9001_SET_OUT_LEN 0
+
+
+/* MC_CMD_WOL_FILTER_SET:
+ * Set a WoL filter
+ *
+ * Locks required: None
+ * Returns: 0, EBUSY, EINVAL, ENOSYS
+ */
+#define MC_CMD_WOL_FILTER_SET 0x32
+#define MC_CMD_WOL_FILTER_SET_IN_LEN 192 /* 190 rounded up to a word */
+#define MC_CMD_WOL_FILTER_SET_IN_FILTER_MODE_OFST 0
+#define MC_CMD_WOL_FILTER_SET_IN_WOL_TYPE_OFST 4
+
+/* There is a union at offset 8, following defines overlap due to
+ * this */
+#define MC_CMD_WOL_FILTER_SET_IN_DATA_OFST 8
+
+#define MC_CMD_WOL_FILTER_SET_IN_MAGIC_MAC_OFST		\
+	MC_CMD_WOL_FILTER_SET_IN_DATA_OFST
+
+#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_SRC_IP_OFST   \
+	MC_CMD_WOL_FILTER_SET_IN_DATA_OFST
+#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_DST_IP_OFST   \
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 4)
+#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_SRC_PORT_OFST \
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 8)
+#define MC_CMD_WOL_FILTER_SET_IN_IPV4_SYN_DST_PORT_OFST \
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 10)
+
+#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_SRC_IP_OFST   \
+	MC_CMD_WOL_FILTER_SET_IN_DATA_OFST
+#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_DST_IP_OFST   \
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 16)
+#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_SRC_PORT_OFST \
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 32)
+#define MC_CMD_WOL_FILTER_SET_IN_IPV6_SYN_DST_PORT_OFST \
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 34)
+
+#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_MASK_OFST	\
+	MC_CMD_WOL_FILTER_SET_IN_DATA_OFST
+#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_OFST		\
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 48)
+#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LEN_OFST	\
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 176)
+#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER3_OFST	\
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 177)
+#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER4_OFST	\
+	(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 178)
+
+#define MC_CMD_WOL_FILTER_SET_OUT_LEN 4
+#define MC_CMD_WOL_FILTER_SET_OUT_FILTER_ID_OFST 0
+
+/* WOL Filter types enumeration */
+#define MC_CMD_WOL_TYPE_MAGIC      0x0
+			 /* unused 0x1 */
+#define MC_CMD_WOL_TYPE_WIN_MAGIC  0x2
+#define MC_CMD_WOL_TYPE_IPV4_SYN   0x3
+#define MC_CMD_WOL_TYPE_IPV6_SYN   0x4
+#define MC_CMD_WOL_TYPE_BITMAP     0x5
+#define MC_CMD_WOL_TYPE_MAX        0x6
+
+#define MC_CMD_FILTER_MODE_SIMPLE     0x0
+#define MC_CMD_FILTER_MODE_STRUCTURED 0xffffffff
+
+/* MC_CMD_WOL_FILTER_REMOVE:
+ * Remove a WoL filter
+ *
+ * Locks required: None
+ * Returns: 0, EINVAL, ENOSYS
+ */
+#define MC_CMD_WOL_FILTER_REMOVE 0x33
+#define MC_CMD_WOL_FILTER_REMOVE_IN_LEN 4
+#define MC_CMD_WOL_FILTER_REMOVE_IN_FILTER_ID_OFST 0
+#define MC_CMD_WOL_FILTER_REMOVE_OUT_LEN 0
+
+
+/* MC_CMD_WOL_FILTER_RESET:
+ * Reset (i.e. remove all) WoL filters
+ *
+ * Locks required: None
+ * Returns: 0, ENOSYS
+ */
+#define MC_CMD_WOL_FILTER_RESET 0x34
+#define MC_CMD_WOL_FILTER_RESET_IN_LEN 0
+#define MC_CMD_WOL_FILTER_RESET_OUT_LEN 0
+
+/* MC_CMD_SET_MCAST_HASH:
+ * Set the MCASH hash value without otherwise
+ * reconfiguring the MAC
+ */
+#define MC_CMD_SET_MCAST_HASH 0x35
+#define MC_CMD_SET_MCAST_HASH_IN_LEN 32
+#define MC_CMD_SET_MCAST_HASH_IN_HASH0_OFST 0
+#define MC_CMD_SET_MCAST_HASH_IN_HASH1_OFST 16
+#define MC_CMD_SET_MCAST_HASH_OUT_LEN 0
+
+/* MC_CMD_NVRAM_TYPES:
+ * Return bitfield indicating available types of virtual NVRAM partitions
+ *
+ * Locks required: none
+ * Returns: 0
+ */
+#define MC_CMD_NVRAM_TYPES 0x36
+#define MC_CMD_NVRAM_TYPES_IN_LEN 0
+#define MC_CMD_NVRAM_TYPES_OUT_LEN 4
+#define MC_CMD_NVRAM_TYPES_OUT_TYPES_OFST 0
+
+/* Supported NVRAM types */
+#define MC_CMD_NVRAM_TYPE_DISABLED_CALLISTO 0
+#define MC_CMD_NVRAM_TYPE_MC_FW 1
+#define MC_CMD_NVRAM_TYPE_MC_FW_BACKUP 2
+#define MC_CMD_NVRAM_TYPE_STATIC_CFG_PORT0 3
+#define MC_CMD_NVRAM_TYPE_STATIC_CFG_PORT1 4
+#define MC_CMD_NVRAM_TYPE_DYNAMIC_CFG_PORT0 5
+#define MC_CMD_NVRAM_TYPE_DYNAMIC_CFG_PORT1 6
+#define MC_CMD_NVRAM_TYPE_EXP_ROM 7
+#define MC_CMD_NVRAM_TYPE_EXP_ROM_CFG_PORT0 8
+#define MC_CMD_NVRAM_TYPE_EXP_ROM_CFG_PORT1 9
+#define MC_CMD_NVRAM_TYPE_PHY_PORT0 10
+#define MC_CMD_NVRAM_TYPE_PHY_PORT1 11
+#define MC_CMD_NVRAM_TYPE_LOG 12
+
+/* MC_CMD_NVRAM_INFO:
+ * Read info about a virtual NVRAM partition
+ *
+ * Locks required: none
+ * Returns: 0, EINVAL (bad type)
+ */
+#define MC_CMD_NVRAM_INFO 0x37
+#define MC_CMD_NVRAM_INFO_IN_LEN 4
+#define MC_CMD_NVRAM_INFO_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_INFO_OUT_LEN 24
+#define MC_CMD_NVRAM_INFO_OUT_TYPE_OFST 0
+#define MC_CMD_NVRAM_INFO_OUT_SIZE_OFST 4
+#define MC_CMD_NVRAM_INFO_OUT_ERASESIZE_OFST 8
+#define MC_CMD_NVRAM_INFO_OUT_FLAGS_OFST 12
+#define   MC_CMD_NVRAM_PROTECTED_LBN 0
+#define   MC_CMD_NVRAM_PROTECTED_WIDTH 1
+#define MC_CMD_NVRAM_INFO_OUT_PHYSDEV_OFST 16
+#define MC_CMD_NVRAM_INFO_OUT_PHYSADDR_OFST 20
+
+/* MC_CMD_NVRAM_UPDATE_START:
+ * Start a group of update operations on a virtual NVRAM partition
+ *
+ * Locks required: PHY_LOCK if type==*PHY*
+ * Returns: 0, EINVAL (bad type), EACCES (if PHY_LOCK required and not held)
+ */
+#define MC_CMD_NVRAM_UPDATE_START 0x38
+#define MC_CMD_NVRAM_UPDATE_START_IN_LEN 4
+#define MC_CMD_NVRAM_UPDATE_START_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_UPDATE_START_OUT_LEN 0
+
+/* MC_CMD_NVRAM_READ:
+ * Read data from a virtual NVRAM partition
+ *
+ * Locks required: PHY_LOCK if type==*PHY*
+ * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held)
+ */
+#define MC_CMD_NVRAM_READ 0x39
+#define MC_CMD_NVRAM_READ_IN_LEN 12
+#define MC_CMD_NVRAM_READ_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_READ_IN_OFFSET_OFST 4
+#define MC_CMD_NVRAM_READ_IN_LENGTH_OFST 8
+#define MC_CMD_NVRAM_READ_OUT_LEN(_read_bytes) (_read_bytes)
+#define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_OFST 0
+
+/* MC_CMD_NVRAM_WRITE:
+ * Write data to a virtual NVRAM partition
+ *
+ * Locks required: PHY_LOCK if type==*PHY*
+ * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held)
+ */
+#define MC_CMD_NVRAM_WRITE 0x3a
+#define MC_CMD_NVRAM_WRITE_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_WRITE_IN_OFFSET_OFST 4
+#define MC_CMD_NVRAM_WRITE_IN_LENGTH_OFST 8
+#define MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_OFST 12
+#define MC_CMD_NVRAM_WRITE_IN_LEN(_write_bytes) (12 + _write_bytes)
+#define MC_CMD_NVRAM_WRITE_OUT_LEN 0
+
+/* MC_CMD_NVRAM_ERASE:
+ * Erase sector(s) from a virtual NVRAM partition
+ *
+ * Locks required: PHY_LOCK if type==*PHY*
+ * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held)
+ */
+#define MC_CMD_NVRAM_ERASE 0x3b
+#define MC_CMD_NVRAM_ERASE_IN_LEN 12
+#define MC_CMD_NVRAM_ERASE_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_ERASE_IN_OFFSET_OFST 4
+#define MC_CMD_NVRAM_ERASE_IN_LENGTH_OFST 8
+#define MC_CMD_NVRAM_ERASE_OUT_LEN 0
+
+/* MC_CMD_NVRAM_UPDATE_FINISH:
+ * Finish a group of update operations on a virtual NVRAM partition
+ *
+ * Locks required: PHY_LOCK if type==*PHY*
+ * Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held)
+ */
+#define MC_CMD_NVRAM_UPDATE_FINISH 0x3c
+#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 4
+#define MC_CMD_NVRAM_UPDATE_FINISH_IN_TYPE_OFST 0
+#define MC_CMD_NVRAM_UPDATE_FINISH_OUT_LEN 0
+
+/* MC_CMD_REBOOT:
+ * Reboot the MC. The AFTER_ASSERTION flag is intended to be used
+ * when the driver notices an assertion failure, to allow two ports to
+ * both recover (semi-)gracefully.
+ *
+ * Locks required: NONE
+ * Returns: Nothing. You get back a response with ERR=1, DATALEN=0
+ */
+#define MC_CMD_REBOOT 0x3d
+#define MC_CMD_REBOOT_IN_LEN 4
+#define MC_CMD_REBOOT_IN_FLAGS_OFST 0
+#define MC_CMD_REBOOT_FLAGS_AFTER_ASSERTION 1
+#define MC_CMD_REBOOT_OUT_LEN 0
+
+/* MC_CMD_SCHEDINFO:
+ * Request scheduler info. from the MC.
+ *
+ * Locks required: NONE
+ * Returns: An array of (timeslice,maximum overrun), one for each thread,
+ * in ascending order of thread address.s
+ */
+#define MC_CMD_SCHEDINFO 0x3e
+#define MC_CMD_SCHEDINFO_IN_LEN 0
+
+
+/* MC_CMD_SET_REBOOT_MODE: (debug)
+ * Set the mode for the next MC reboot.
+ *
+ * Locks required: NONE
+ *
+ * Sets the reboot mode to the specified value.  Returns the old mode.
+ */
+#define MC_CMD_REBOOT_MODE 0x3f
+#define MC_CMD_REBOOT_MODE_IN_LEN 4
+#define MC_CMD_REBOOT_MODE_IN_VALUE_OFST 0
+#define MC_CMD_REBOOT_MODE_OUT_LEN 4
+#define MC_CMD_REBOOT_MODE_OUT_VALUE_OFST 0
+#define   MC_CMD_REBOOT_MODE_NORMAL 0
+#define   MC_CMD_REBOOT_MODE_SNAPPER 3
+
+/* MC_CMD_DEBUG_LOG:
+ * Null request/response command (debug)
+ * - sequence number is always zero
+ * - only supported on the UART interface
+ * (the same set of bytes is delivered as an
+ * event over PCI)
+ */
+#define MC_CMD_DEBUG_LOG 0x40
+#define MC_CMD_DEBUG_LOG_IN_LEN 0
+#define MC_CMD_DEBUG_LOG_OUT_LEN 0
+
+/* Generic sensor enumeration. Note that a dual port NIC
+ * will EITHER expose PHY_COMMON_TEMP OR PHY0_TEMP and
+ * PHY1_TEMP depending on whether there is a single sensor
+ * in the vicinity of the two port, or one per port.
+ */
+#define MC_CMD_SENSOR_CONTROLLER_TEMP 0		/* degC */
+#define MC_CMD_SENSOR_PHY_COMMON_TEMP 1		/* degC */
+#define MC_CMD_SENSOR_CONTROLLER_COOLING 2	/* bool */
+#define MC_CMD_SENSOR_PHY0_TEMP 3		/* degC */
+#define MC_CMD_SENSOR_PHY0_COOLING 4		/* bool */
+#define MC_CMD_SENSOR_PHY1_TEMP 5		/* degC */
+#define MC_CMD_SENSOR_PHY1_COOLING 6		/* bool */
+#define MC_CMD_SENSOR_IN_1V0 7			/* mV */
+#define MC_CMD_SENSOR_IN_1V2 8			/* mV */
+#define MC_CMD_SENSOR_IN_1V8 9			/* mV */
+#define MC_CMD_SENSOR_IN_2V5 10			/* mV */
+#define MC_CMD_SENSOR_IN_3V3 11			/* mV */
+#define MC_CMD_SENSOR_IN_12V0 12		/* mV */
+
+
+/* Sensor state */
+#define MC_CMD_SENSOR_STATE_OK 0
+#define MC_CMD_SENSOR_STATE_WARNING 1
+#define MC_CMD_SENSOR_STATE_FATAL 2
+#define MC_CMD_SENSOR_STATE_BROKEN 3
+
+/* MC_CMD_SENSOR_INFO:
+ * Returns information about every available sensor.
+ *
+ * Each sensor has a single (16bit) value, and a corresponding state.
+ * The mapping between value and sensor is nominally determined by the
+ * MC, but in practise is implemented as zero (BROKEN), one (TEMPERATURE),
+ * or two (VOLTAGE) ranges per sensor per state.
+ *
+ * This call returns a mask (32bit) of the sensors that are supported
+ * by this platform, then an array (indexed by MC_CMD_SENSOR) of byte
+ * offsets to the per-sensor arrays. Each sensor array has four 16bit
+ * numbers, min1, max1, min2, max2.
+ *
+ * Locks required: None
+ * Returns: 0
+ */
+#define MC_CMD_SENSOR_INFO 0x41
+#define MC_CMD_SENSOR_INFO_IN_LEN 0
+#define MC_CMD_SENSOR_INFO_OUT_MASK_OFST 0
+#define MC_CMD_SENSOR_INFO_OUT_OFFSET_OFST(_x) \
+	(4 + (_x))
+#define MC_CMD_SENSOR_INFO_OUT_MIN1_OFST(_ofst) \
+	((_ofst) + 0)
+#define MC_CMD_SENSOR_INFO_OUT_MAX1_OFST(_ofst) \
+	((_ofst) + 2)
+#define MC_CMD_SENSOR_INFO_OUT_MIN2_OFST(_ofst) \
+	((_ofst) + 4)
+#define MC_CMD_SENSOR_INFO_OUT_MAX2_OFST(_ofst) \
+	((_ofst) + 6)
+
+/* MC_CMD_READ_SENSORS
+ * Returns the current (value, state) for each sensor
+ *
+ * Returns the current (value, state) [each 16bit] of each sensor supported by
+ * this board, by DMA'ing a sparse array (indexed by the sensor type) into host
+ * memory.
+ *
+ * The MC will send a SENSOREVT event every time any sensor changes state. The
+ * driver is responsible for ensuring that it doesn't miss any events. The board
+ * will function normally if all sensors are in STATE_OK or state_WARNING.
+ * Otherwise the board should not be expected to function.
+ */
+#define MC_CMD_READ_SENSORS 0x42
+#define MC_CMD_READ_SENSORS_IN_LEN 8
+#define MC_CMD_READ_SENSORS_IN_DMA_ADDR_LO_OFST 0
+#define MC_CMD_READ_SENSORS_IN_DMA_ADDR_HI_OFST 4
+#define MC_CMD_READ_SENSORS_OUT_LEN 0
+
+
+/* MC_CMD_GET_PHY_STATE:
+ * Report current state of PHY.  A "zombie" PHY is a PHY that has failed to
+ * boot (e.g. due to missing or corrupted firmware).
+ *
+ * Locks required: None
+ * Return code: 0
+ */
+#define MC_CMD_GET_PHY_STATE 0x43
+
+#define MC_CMD_GET_PHY_STATE_IN_LEN 0
+#define MC_CMD_GET_PHY_STATE_OUT_LEN 4
+#define MC_CMD_GET_PHY_STATE_STATE_OFST 0
+/* PHY state enumeration: */
+#define MC_CMD_PHY_STATE_OK 1
+#define MC_CMD_PHY_STATE_ZOMBIE 2
+
+
+/* 802.1Qbb control. 8 Tx queues that map to priorities 0 - 7. Use all 1s to
+ * disable 802.Qbb for a given priority. */
+#define MC_CMD_SETUP_8021QBB 0x44
+#define MC_CMD_SETUP_8021QBB_IN_LEN 32
+#define MC_CMD_SETUP_8021QBB_OUT_LEN 0
+#define MC_CMD_SETUP_8021QBB_IN_TXQS_OFFST 0
+
+
+/* MC_CMD_WOL_FILTER_GET:
+ * Retrieve ID of any WoL filters
+ *
+ * Locks required: None
+ * Returns: 0, ENOSYS
+ */
+#define MC_CMD_WOL_FILTER_GET 0x45
+#define MC_CMD_WOL_FILTER_GET_IN_LEN 0
+#define MC_CMD_WOL_FILTER_GET_OUT_LEN 4
+#define MC_CMD_WOL_FILTER_GET_OUT_FILTER_ID_OFST 0
+
+
+/* MC_CMD_ADD_LIGHTSOUT_OFFLOAD:
+ * Offload a protocol to NIC for lights-out state
+ *
+ * Locks required: None
+ * Returns: 0, ENOSYS
+ */
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD 0x46
+
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LEN 16
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_OFST 0
+
+/* There is a union at offset 4, following defines overlap due to
+ * this */
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_OFST 4
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARPMAC_OFST 4
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARPIP_OFST 10
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_NSMAC_OFST 4
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_NSSNIPV6_OFST 10
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_NSIPV6_OFST 26
+
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_OUT_LEN 4
+#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_OUT_FILTER_ID_OFST 0
+
+
+/* MC_CMD_REMOVE_LIGHTSOUT_PROTOCOL_OFFLOAD:
+ * Offload a protocol to NIC for lights-out state
+ *
+ * Locks required: None
+ * Returns: 0, ENOSYS
+ */
+#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD 0x47
+#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_IN_LEN 8
+#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_OUT_LEN 0
+
+#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_OFST 0
+#define MC_CMD_REMOVE_LIGHTSOUT_OFFLOAD_IN_FILTER_ID_OFST 4
+
+/* Lights-out offload protocols enumeration */
+#define MC_CMD_LIGHTSOUT_OFFLOAD_PROTOCOL_ARP 0x1
+#define MC_CMD_LIGHTSOUT_OFFLOAD_PROTOCOL_NS  0x2
+
+
+/* MC_CMD_MAC_RESET_RESTORE:
+ * Restore MAC after block reset
+ *
+ * Locks required: None
+ * Returns: 0
+ */
+
+#define MC_CMD_MAC_RESET_RESTORE 0x48
+#define MC_CMD_MAC_RESET_RESTORE_IN_LEN 0
+#define MC_CMD_MAC_RESET_RESTORE_OUT_LEN 0
+
+#endif /* MCDI_PCOL_H */
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
new file mode 100644
index 0000000..0e1bcc5
--- /dev/null
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -0,0 +1,597 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+/*
+ * Driver for PHY related operations via MCDI.
+ */
+
+#include "efx.h"
+#include "phy.h"
+#include "mcdi.h"
+#include "mcdi_pcol.h"
+#include "mdio_10g.h"
+
+struct efx_mcdi_phy_cfg {
+	u32 flags;
+	u32 type;
+	u32 supported_cap;
+	u32 channel;
+	u32 port;
+	u32 stats_mask;
+	u8 name[20];
+	u32 media;
+	u32 mmd_mask;
+	u8 revision[20];
+	u32 forced_cap;
+};
+
+static int
+efx_mcdi_get_phy_cfg(struct efx_nic *efx, struct efx_mcdi_phy_cfg *cfg)
+{
+	u8 outbuf[MC_CMD_GET_PHY_CFG_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_GET_PHY_CFG_IN_LEN != 0);
+	BUILD_BUG_ON(MC_CMD_GET_PHY_CFG_OUT_NAME_LEN != sizeof(cfg->name));
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_CFG, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	if (outlen < MC_CMD_GET_PHY_CFG_OUT_LEN) {
+		rc = -EMSGSIZE;
+		goto fail;
+	}
+
+	cfg->flags = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_FLAGS);
+	cfg->type = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_TYPE);
+	cfg->supported_cap =
+		MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_SUPPORTED_CAP);
+	cfg->channel = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_CHANNEL);
+	cfg->port = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_PRT);
+	cfg->stats_mask = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_STATS_MASK);
+	memcpy(cfg->name, MCDI_PTR(outbuf, GET_PHY_CFG_OUT_NAME),
+	       sizeof(cfg->name));
+	cfg->media = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_MEDIA_TYPE);
+	cfg->mmd_mask = MCDI_DWORD(outbuf, GET_PHY_CFG_OUT_MMD_MASK);
+	memcpy(cfg->revision, MCDI_PTR(outbuf, GET_PHY_CFG_OUT_REVISION),
+	       sizeof(cfg->revision));
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static int efx_mcdi_set_link(struct efx_nic *efx, u32 capabilities,
+			     u32 flags, u32 loopback_mode,
+			     u32 loopback_speed)
+{
+	u8 inbuf[MC_CMD_SET_LINK_IN_LEN];
+	int rc;
+
+	BUILD_BUG_ON(MC_CMD_SET_LINK_OUT_LEN != 0);
+
+	MCDI_SET_DWORD(inbuf, SET_LINK_IN_CAP, capabilities);
+	MCDI_SET_DWORD(inbuf, SET_LINK_IN_FLAGS, flags);
+	MCDI_SET_DWORD(inbuf, SET_LINK_IN_LOOPBACK_MODE, loopback_mode);
+	MCDI_SET_DWORD(inbuf, SET_LINK_IN_LOOPBACK_SPEED, loopback_speed);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_SET_LINK, inbuf, sizeof(inbuf),
+			  NULL, 0, NULL);
+	if (rc)
+		goto fail;
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static int efx_mcdi_loopback_modes(struct efx_nic *efx, u64 *loopback_modes)
+{
+	u8 outbuf[MC_CMD_GET_LOOPBACK_MODES_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LOOPBACK_MODES, NULL, 0,
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	if (outlen < MC_CMD_GET_LOOPBACK_MODES_OUT_LEN) {
+		rc = -EMSGSIZE;
+		goto fail;
+	}
+
+	*loopback_modes = MCDI_QWORD(outbuf, GET_LOOPBACK_MODES_SUGGESTED);
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_mdio_read(struct efx_nic *efx, unsigned int bus,
+			 unsigned int prtad, unsigned int devad, u16 addr,
+			 u16 *value_out, u32 *status_out)
+{
+	u8 inbuf[MC_CMD_MDIO_READ_IN_LEN];
+	u8 outbuf[MC_CMD_MDIO_READ_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, MDIO_READ_IN_BUS, bus);
+	MCDI_SET_DWORD(inbuf, MDIO_READ_IN_PRTAD, prtad);
+	MCDI_SET_DWORD(inbuf, MDIO_READ_IN_DEVAD, devad);
+	MCDI_SET_DWORD(inbuf, MDIO_READ_IN_ADDR, addr);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_MDIO_READ, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	*value_out = (u16)MCDI_DWORD(outbuf, MDIO_READ_OUT_VALUE);
+	*status_out = MCDI_DWORD(outbuf, MDIO_READ_OUT_STATUS);
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+int efx_mcdi_mdio_write(struct efx_nic *efx, unsigned int bus,
+			  unsigned int prtad, unsigned int devad, u16 addr,
+			  u16 value, u32 *status_out)
+{
+	u8 inbuf[MC_CMD_MDIO_WRITE_IN_LEN];
+	u8 outbuf[MC_CMD_MDIO_WRITE_OUT_LEN];
+	size_t outlen;
+	int rc;
+
+	MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_BUS, bus);
+	MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_PRTAD, prtad);
+	MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_DEVAD, devad);
+	MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_ADDR, addr);
+	MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_VALUE, value);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_MDIO_WRITE, inbuf, sizeof(inbuf),
+			  outbuf, sizeof(outbuf), &outlen);
+	if (rc)
+		goto fail;
+
+	*status_out = MCDI_DWORD(outbuf, MDIO_WRITE_OUT_STATUS);
+	return 0;
+
+fail:
+	EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+	return rc;
+}
+
+static u32 mcdi_to_ethtool_cap(u32 media, u32 cap)
+{
+	u32 result = 0;
+
+	switch (media) {
+	case MC_CMD_MEDIA_KX4:
+		result |= SUPPORTED_Backplane;
+		if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
+			result |= SUPPORTED_1000baseKX_Full;
+		if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
+			result |= SUPPORTED_10000baseKX4_Full;
+		break;
+
+	case MC_CMD_MEDIA_XFP:
+	case MC_CMD_MEDIA_SFP_PLUS:
+		result |= SUPPORTED_FIBRE;
+		break;
+
+	case MC_CMD_MEDIA_BASE_T:
+		result |= SUPPORTED_TP;
+		if (cap & (1 << MC_CMD_PHY_CAP_10HDX_LBN))
+			result |= SUPPORTED_10baseT_Half;
+		if (cap & (1 << MC_CMD_PHY_CAP_10FDX_LBN))
+			result |= SUPPORTED_10baseT_Full;
+		if (cap & (1 << MC_CMD_PHY_CAP_100HDX_LBN))
+			result |= SUPPORTED_100baseT_Half;
+		if (cap & (1 << MC_CMD_PHY_CAP_100FDX_LBN))
+			result |= SUPPORTED_100baseT_Full;
+		if (cap & (1 << MC_CMD_PHY_CAP_1000HDX_LBN))
+			result |= SUPPORTED_1000baseT_Half;
+		if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
+			result |= SUPPORTED_1000baseT_Full;
+		if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
+			result |= SUPPORTED_10000baseT_Full;
+		break;
+	}
+
+	if (cap & (1 << MC_CMD_PHY_CAP_PAUSE_LBN))
+		result |= SUPPORTED_Pause;
+	if (cap & (1 << MC_CMD_PHY_CAP_ASYM_LBN))
+		result |= SUPPORTED_Asym_Pause;
+	if (cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
+		result |= SUPPORTED_Autoneg;
+
+	return result;
+}
+
+static u32 ethtool_to_mcdi_cap(u32 cap)
+{
+	u32 result = 0;
+
+	if (cap & SUPPORTED_10baseT_Half)
+		result |= (1 << MC_CMD_PHY_CAP_10HDX_LBN);
+	if (cap & SUPPORTED_10baseT_Full)
+		result |= (1 << MC_CMD_PHY_CAP_10FDX_LBN);
+	if (cap & SUPPORTED_100baseT_Half)
+		result |= (1 << MC_CMD_PHY_CAP_100HDX_LBN);
+	if (cap & SUPPORTED_100baseT_Full)
+		result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
+	if (cap & SUPPORTED_1000baseT_Half)
+		result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
+	if (cap & (SUPPORTED_1000baseT_Full | SUPPORTED_1000baseKX_Full))
+		result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
+	if (cap & (SUPPORTED_10000baseT_Full | SUPPORTED_10000baseKX4_Full))
+		result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
+	if (cap & SUPPORTED_Pause)
+		result |= (1 << MC_CMD_PHY_CAP_PAUSE_LBN);
+	if (cap & SUPPORTED_Asym_Pause)
+		result |= (1 << MC_CMD_PHY_CAP_ASYM_LBN);
+	if (cap & SUPPORTED_Autoneg)
+		result |= (1 << MC_CMD_PHY_CAP_AN_LBN);
+
+	return result;
+}
+
+static u32 efx_get_mcdi_phy_flags(struct efx_nic *efx)
+{
+	struct efx_mcdi_phy_cfg *phy_cfg = efx->phy_data;
+	enum efx_phy_mode mode, supported;
+	u32 flags;
+
+	/* TODO: Advertise the capabilities supported by this PHY */
+	supported = 0;
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_TXDIS_LBN))
+		supported |= PHY_MODE_TX_DISABLED;
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_LOWPOWER_LBN))
+		supported |= PHY_MODE_LOW_POWER;
+	if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_POWEROFF_LBN))
+		supported |= PHY_MODE_OFF;
+
+	mode = efx->phy_mode & supported;
+
+	flags = 0;
+	if (mode & PHY_MODE_TX_DISABLED)
+		flags |= (1 << MC_CMD_SET_LINK_TXDIS_LBN);
+	if (mode & PHY_MODE_LOW_POWER)
+		flags |= (1 << MC_CMD_SET_LINK_LOWPOWER_LBN);
+	if (mode & PHY_MODE_OFF)
+		flags |= (1 << MC_CMD_SET_LINK_POWEROFF_LBN);
+
+	return flags;
+}
+
+static u32 mcdi_to_ethtool_media(u32 media)
+{
+	switch (media) {
+	case MC_CMD_MEDIA_XAUI:
+	case MC_CMD_MEDIA_CX4:
+	case MC_CMD_MEDIA_KX4:
+		return PORT_OTHER;
+
+	case MC_CMD_MEDIA_XFP:
+	case MC_CMD_MEDIA_SFP_PLUS:
+		return PORT_FIBRE;
+
+	case MC_CMD_MEDIA_BASE_T:
+		return PORT_TP;
+
+	default:
+		return PORT_OTHER;
+	}
+}
+
+static int efx_mcdi_phy_probe(struct efx_nic *efx)
+{
+	struct efx_mcdi_phy_cfg *phy_cfg;
+	int rc;
+
+	/* TODO: Move phy_data initialisation to
+	 * phy_op->probe/remove, rather than init/fini */
+	phy_cfg = kzalloc(sizeof(*phy_cfg), GFP_KERNEL);
+	if (phy_cfg == NULL) {
+		rc = -ENOMEM;
+		goto fail_alloc;
+	}
+	rc = efx_mcdi_get_phy_cfg(efx, phy_cfg);
+	if (rc != 0)
+		goto fail;
+
+	efx->phy_type = phy_cfg->type;
+
+	efx->mdio_bus = phy_cfg->channel;
+	efx->mdio.prtad = phy_cfg->port;
+	efx->mdio.mmds = phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
+	efx->mdio.mode_support = 0;
+	if (phy_cfg->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
+		efx->mdio.mode_support |= MDIO_SUPPORTS_C22;
+	if (phy_cfg->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
+		efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+
+	/* Assert that we can map efx -> mcdi loopback modes */
+	BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE);
+	BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA);
+	BUILD_BUG_ON(LOOPBACK_GMAC != MC_CMD_LOOPBACK_GMAC);
+	BUILD_BUG_ON(LOOPBACK_XGMII != MC_CMD_LOOPBACK_XGMII);
+	BUILD_BUG_ON(LOOPBACK_XGXS != MC_CMD_LOOPBACK_XGXS);
+	BUILD_BUG_ON(LOOPBACK_XAUI != MC_CMD_LOOPBACK_XAUI);
+	BUILD_BUG_ON(LOOPBACK_GMII != MC_CMD_LOOPBACK_GMII);
+	BUILD_BUG_ON(LOOPBACK_SGMII != MC_CMD_LOOPBACK_SGMII);
+	BUILD_BUG_ON(LOOPBACK_XGBR != MC_CMD_LOOPBACK_XGBR);
+	BUILD_BUG_ON(LOOPBACK_XFI != MC_CMD_LOOPBACK_XFI);
+	BUILD_BUG_ON(LOOPBACK_XAUI_FAR != MC_CMD_LOOPBACK_XAUI_FAR);
+	BUILD_BUG_ON(LOOPBACK_GMII_FAR != MC_CMD_LOOPBACK_GMII_FAR);
+	BUILD_BUG_ON(LOOPBACK_SGMII_FAR != MC_CMD_LOOPBACK_SGMII_FAR);
+	BUILD_BUG_ON(LOOPBACK_XFI_FAR != MC_CMD_LOOPBACK_XFI_FAR);
+	BUILD_BUG_ON(LOOPBACK_GPHY != MC_CMD_LOOPBACK_GPHY);
+	BUILD_BUG_ON(LOOPBACK_PHYXS != MC_CMD_LOOPBACK_PHYXS);
+	BUILD_BUG_ON(LOOPBACK_PCS != MC_CMD_LOOPBACK_PCS);
+	BUILD_BUG_ON(LOOPBACK_PMAPMD != MC_CMD_LOOPBACK_PMAPMD);
+	BUILD_BUG_ON(LOOPBACK_XPORT != MC_CMD_LOOPBACK_XPORT);
+	BUILD_BUG_ON(LOOPBACK_XGMII_WS != MC_CMD_LOOPBACK_XGMII_WS);
+	BUILD_BUG_ON(LOOPBACK_XAUI_WS != MC_CMD_LOOPBACK_XAUI_WS);
+	BUILD_BUG_ON(LOOPBACK_XAUI_WS_FAR != MC_CMD_LOOPBACK_XAUI_WS_FAR);
+	BUILD_BUG_ON(LOOPBACK_XAUI_WS_NEAR != MC_CMD_LOOPBACK_XAUI_WS_NEAR);
+	BUILD_BUG_ON(LOOPBACK_GMII_WS != MC_CMD_LOOPBACK_GMII_WS);
+	BUILD_BUG_ON(LOOPBACK_XFI_WS != MC_CMD_LOOPBACK_XFI_WS);
+	BUILD_BUG_ON(LOOPBACK_XFI_WS_FAR != MC_CMD_LOOPBACK_XFI_WS_FAR);
+	BUILD_BUG_ON(LOOPBACK_PHYXS_WS != MC_CMD_LOOPBACK_PHYXS_WS);
+
+	rc = efx_mcdi_loopback_modes(efx, &efx->loopback_modes);
+	if (rc != 0)
+		goto fail;
+	/* The MC indicates that LOOPBACK_NONE is a valid loopback mode,
+	 * but by convention we don't */
+	efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
+
+	kfree(phy_cfg);
+
+	return 0;
+
+fail:
+	kfree(phy_cfg);
+fail_alloc:
+	return rc;
+}
+
+static int efx_mcdi_phy_init(struct efx_nic *efx)
+{
+	struct efx_mcdi_phy_cfg *phy_data;
+	u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+	u32 caps;
+	int rc;
+
+	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	if (phy_data == NULL)
+		return -ENOMEM;
+
+	rc = efx_mcdi_get_phy_cfg(efx, phy_data);
+	if (rc != 0)
+		goto fail;
+
+	efx->phy_data = phy_data;
+
+	BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+			  outbuf, sizeof(outbuf), NULL);
+	if (rc)
+		goto fail;
+
+	caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
+	if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
+		efx->link_advertising =
+			mcdi_to_ethtool_cap(phy_data->media, caps);
+	else
+		phy_data->forced_cap = caps;
+
+	return 0;
+
+fail:
+	kfree(phy_data);
+	return rc;
+}
+
+int efx_mcdi_phy_reconfigure(struct efx_nic *efx)
+{
+	struct efx_mcdi_phy_cfg *phy_cfg = efx->phy_data;
+	u32 caps = (efx->link_advertising ?
+		    ethtool_to_mcdi_cap(efx->link_advertising) :
+		    phy_cfg->forced_cap);
+
+	return efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx),
+				 efx->loopback_mode, 0);
+}
+
+void efx_mcdi_phy_decode_link(struct efx_nic *efx,
+			      struct efx_link_state *link_state,
+			      u32 speed, u32 flags, u32 fcntl)
+{
+	switch (fcntl) {
+	case MC_CMD_FCNTL_AUTO:
+		WARN_ON(1);	/* This is not a link mode */
+		link_state->fc = EFX_FC_AUTO | EFX_FC_TX | EFX_FC_RX;
+		break;
+	case MC_CMD_FCNTL_BIDIR:
+		link_state->fc = EFX_FC_TX | EFX_FC_RX;
+		break;
+	case MC_CMD_FCNTL_RESPOND:
+		link_state->fc = EFX_FC_RX;
+		break;
+	default:
+		WARN_ON(1);
+	case MC_CMD_FCNTL_OFF:
+		link_state->fc = 0;
+		break;
+	}
+
+	link_state->up = !!(flags & (1 << MC_CMD_GET_LINK_LINK_UP_LBN));
+	link_state->fd = !!(flags & (1 << MC_CMD_GET_LINK_FULL_DUPLEX_LBN));
+	link_state->speed = speed;
+}
+
+/* Verify that the forced flow control settings (!EFX_FC_AUTO) are
+ * supported by the link partner. Warn the user if this isn't the case
+ */
+void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa)
+{
+	struct efx_mcdi_phy_cfg *phy_cfg = efx->phy_data;
+	u32 rmtadv;
+
+	/* The link partner capabilities are only relevent if the
+	 * link supports flow control autonegotiation */
+	if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_ASYM_LBN))
+		return;
+
+	/* If flow control autoneg is supported and enabled, then fine */
+	if (efx->wanted_fc & EFX_FC_AUTO)
+		return;
+
+	rmtadv = 0;
+	if (lpa & (1 << MC_CMD_PHY_CAP_PAUSE_LBN))
+		rmtadv |= ADVERTISED_Pause;
+	if (lpa & (1 << MC_CMD_PHY_CAP_ASYM_LBN))
+		rmtadv |=  ADVERTISED_Asym_Pause;
+
+	if ((efx->wanted_fc & EFX_FC_TX) && rmtadv == ADVERTISED_Asym_Pause)
+		EFX_ERR(efx, "warning: link partner doesn't support "
+			"pause frames");
+}
+
+static bool efx_mcdi_phy_poll(struct efx_nic *efx)
+{
+	struct efx_link_state old_state = efx->link_state;
+	u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+	int rc;
+
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+	BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+			  outbuf, sizeof(outbuf), NULL);
+	if (rc) {
+		EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+		efx->link_state.up = false;
+	} else {
+		efx_mcdi_phy_decode_link(
+			efx, &efx->link_state,
+			MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED),
+			MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS),
+			MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL));
+	}
+
+	return !efx_link_state_equal(&efx->link_state, &old_state);
+}
+
+static void efx_mcdi_phy_fini(struct efx_nic *efx)
+{
+	struct efx_mcdi_phy_data *phy_data = efx->phy_data;
+
+	efx->phy_data = NULL;
+	kfree(phy_data);
+}
+
+static void efx_mcdi_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	struct efx_mcdi_phy_cfg *phy_cfg = efx->phy_data;
+	u8 outbuf[MC_CMD_GET_LINK_OUT_LEN];
+	int rc;
+
+	ecmd->supported =
+		mcdi_to_ethtool_cap(phy_cfg->media, phy_cfg->supported_cap);
+	ecmd->advertising = efx->link_advertising;
+	ecmd->speed = efx->link_state.speed;
+	ecmd->duplex = efx->link_state.fd;
+	ecmd->port = mcdi_to_ethtool_media(phy_cfg->media);
+	ecmd->phy_address = phy_cfg->port;
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->autoneg = !!(efx->link_advertising & ADVERTISED_Autoneg);
+	ecmd->mdio_support = (efx->mdio.mode_support &
+			      (MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22));
+
+	BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+	rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+			  outbuf, sizeof(outbuf), NULL);
+	if (rc) {
+		EFX_ERR(efx, "%s: failed rc=%d\n", __func__, rc);
+		return;
+	}
+	ecmd->lp_advertising =
+		mcdi_to_ethtool_cap(phy_cfg->media,
+				    MCDI_DWORD(outbuf, GET_LINK_OUT_LP_CAP));
+}
+
+static int efx_mcdi_phy_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	struct efx_mcdi_phy_cfg *phy_cfg = efx->phy_data;
+	u32 caps;
+	int rc;
+
+	if (ecmd->autoneg) {
+		caps = (ethtool_to_mcdi_cap(ecmd->advertising) |
+			 1 << MC_CMD_PHY_CAP_AN_LBN);
+	} else if (ecmd->duplex) {
+		switch (ecmd->speed) {
+		case 10:    caps = 1 << MC_CMD_PHY_CAP_10FDX_LBN;    break;
+		case 100:   caps = 1 << MC_CMD_PHY_CAP_100FDX_LBN;   break;
+		case 1000:  caps = 1 << MC_CMD_PHY_CAP_1000FDX_LBN;  break;
+		case 10000: caps = 1 << MC_CMD_PHY_CAP_10000FDX_LBN; break;
+		default:    return -EINVAL;
+		}
+	} else {
+		switch (ecmd->speed) {
+		case 10:    caps = 1 << MC_CMD_PHY_CAP_10HDX_LBN;    break;
+		case 100:   caps = 1 << MC_CMD_PHY_CAP_100HDX_LBN;   break;
+		case 1000:  caps = 1 << MC_CMD_PHY_CAP_1000HDX_LBN;  break;
+		default:    return -EINVAL;
+		}
+	}
+
+	rc = efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx),
+			       efx->loopback_mode, 0);
+	if (rc)
+		return rc;
+
+	if (ecmd->autoneg) {
+		efx_link_set_advertising(
+			efx, ecmd->advertising | ADVERTISED_Autoneg);
+		phy_cfg->forced_cap = 0;
+	} else {
+		efx_link_set_advertising(efx, 0);
+		phy_cfg->forced_cap = caps;
+	}
+	return 0;
+}
+
+struct efx_phy_operations efx_mcdi_phy_ops = {
+	.probe		= efx_mcdi_phy_probe,
+	.init 	 	= efx_mcdi_phy_init,
+	.reconfigure	= efx_mcdi_phy_reconfigure,
+	.poll		= efx_mcdi_phy_poll,
+	.fini		= efx_mcdi_phy_fini,
+	.get_settings	= efx_mcdi_phy_get_settings,
+	.set_settings	= efx_mcdi_phy_set_settings,
+	.run_tests	= NULL,
+	.test_name	= NULL,
+};
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 6c33459..1574e52 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -1,6 +1,6 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -14,8 +14,8 @@
 #include <linux/delay.h>
 #include "net_driver.h"
 #include "mdio_10g.h"
-#include "boards.h"
 #include "workarounds.h"
+#include "nic.h"
 
 unsigned efx_mdio_id_oui(u32 id)
 {
@@ -174,7 +174,7 @@
 	 * of mmd's */
 	if (LOOPBACK_INTERNAL(efx))
 		return true;
-	else if (efx->loopback_mode == LOOPBACK_NETWORK)
+	else if (LOOPBACK_MASK(efx) & LOOPBACKS_WS)
 		return false;
 	else if (efx_phy_mode_disabled(efx->phy_mode))
 		return false;
@@ -211,7 +211,7 @@
 			  efx->loopback_mode == LOOPBACK_PCS);
 	efx_mdio_set_flag(efx, MDIO_MMD_PHYXS,
 			  MDIO_CTRL1, MDIO_PHYXS_CTRL1_LOOPBACK,
-			  efx->loopback_mode == LOOPBACK_NETWORK);
+			  efx->loopback_mode == LOOPBACK_PHYXS_WS);
 }
 
 static void efx_mdio_set_mmd_lpower(struct efx_nic *efx,
@@ -249,8 +249,6 @@
 int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	struct ethtool_cmd prev;
-	u32 required;
-	int reg;
 
 	efx->phy_op->get_settings(efx, &prev);
 
@@ -266,86 +264,74 @@
 		return -EINVAL;
 
 	/* Check that PHY supports these settings */
-	if (ecmd->autoneg) {
-		required = SUPPORTED_Autoneg;
-	} else if (ecmd->duplex) {
-		switch (ecmd->speed) {
-		case SPEED_10:  required = SUPPORTED_10baseT_Full;  break;
-		case SPEED_100: required = SUPPORTED_100baseT_Full; break;
-		default:        return -EINVAL;
-		}
-	} else {
-		switch (ecmd->speed) {
-		case SPEED_10:  required = SUPPORTED_10baseT_Half;  break;
-		case SPEED_100: required = SUPPORTED_100baseT_Half; break;
-		default:        return -EINVAL;
-		}
-	}
-	required |= ecmd->advertising;
-	if (required & ~prev.supported)
+	if (!ecmd->autoneg ||
+	    (ecmd->advertising | SUPPORTED_Autoneg) & ~prev.supported)
 		return -EINVAL;
 
-	if (ecmd->autoneg) {
-		bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
-			    || EFX_WORKAROUND_13204(efx));
-
-		/* Set up the base page */
-		reg = ADVERTISE_CSMA;
-		if (ecmd->advertising & ADVERTISED_10baseT_Half)
-			reg |= ADVERTISE_10HALF;
-		if (ecmd->advertising & ADVERTISED_10baseT_Full)
-			reg |= ADVERTISE_10FULL;
-		if (ecmd->advertising & ADVERTISED_100baseT_Half)
-			reg |= ADVERTISE_100HALF;
-		if (ecmd->advertising & ADVERTISED_100baseT_Full)
-			reg |= ADVERTISE_100FULL;
-		if (xnp)
-			reg |= ADVERTISE_RESV;
-		else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
-					      ADVERTISED_1000baseT_Full))
-			reg |= ADVERTISE_NPAGE;
-		reg |= mii_advertise_flowctrl(efx->wanted_fc);
-		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
-
-		/* Set up the (extended) next page if necessary */
-		if (efx->phy_op->set_npage_adv)
-			efx->phy_op->set_npage_adv(efx, ecmd->advertising);
-
-		/* Enable and restart AN */
-		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
-		reg |= MDIO_AN_CTRL1_ENABLE;
-		if (!(EFX_WORKAROUND_15195(efx) &&
-		      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
-			reg |= MDIO_AN_CTRL1_RESTART;
-		if (xnp)
-			reg |= MDIO_AN_CTRL1_XNP;
-		else
-			reg &= ~MDIO_AN_CTRL1_XNP;
-		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
-	} else {
-		/* Disable AN */
-		efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_CTRL1,
-				  MDIO_AN_CTRL1_ENABLE, false);
-
-		/* Set the basic control bits */
-		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1);
-		reg &= ~(MDIO_CTRL1_SPEEDSEL | MDIO_CTRL1_FULLDPLX);
-		if (ecmd->speed == SPEED_100)
-			reg |= MDIO_PMA_CTRL1_SPEED100;
-		if (ecmd->duplex)
-			reg |= MDIO_CTRL1_FULLDPLX;
-		efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, reg);
-	}
-
+	efx_link_set_advertising(efx, ecmd->advertising | ADVERTISED_Autoneg);
+	efx_mdio_an_reconfigure(efx);
 	return 0;
 }
 
+/**
+ * efx_mdio_an_reconfigure - Push advertising flags and restart autonegotiation
+ * @efx:		Efx NIC
+ */
+void efx_mdio_an_reconfigure(struct efx_nic *efx)
+{
+	bool xnp = (efx->link_advertising & ADVERTISED_10000baseT_Full
+		    || EFX_WORKAROUND_13204(efx));
+	int reg;
+
+	WARN_ON(!(efx->mdio.mmds & MDIO_DEVS_AN));
+
+	/* Set up the base page */
+	reg = ADVERTISE_CSMA;
+	if (efx->link_advertising & ADVERTISED_10baseT_Half)
+		reg |= ADVERTISE_10HALF;
+	if (efx->link_advertising & ADVERTISED_10baseT_Full)
+		reg |= ADVERTISE_10FULL;
+	if (efx->link_advertising & ADVERTISED_100baseT_Half)
+		reg |= ADVERTISE_100HALF;
+	if (efx->link_advertising & ADVERTISED_100baseT_Full)
+		reg |= ADVERTISE_100FULL;
+	if (xnp)
+		reg |= ADVERTISE_RESV;
+	else if (efx->link_advertising & (ADVERTISED_1000baseT_Half |
+					  ADVERTISED_1000baseT_Full))
+		reg |= ADVERTISE_NPAGE;
+	if (efx->link_advertising & ADVERTISED_Pause)
+		reg |= ADVERTISE_PAUSE_CAP;
+	if (efx->link_advertising & ADVERTISED_Asym_Pause)
+		reg |= ADVERTISE_PAUSE_ASYM;
+	efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
+
+	/* Set up the (extended) next page if necessary */
+	if (efx->phy_op->set_npage_adv)
+		efx->phy_op->set_npage_adv(efx, efx->link_advertising);
+
+	/* Enable and restart AN */
+	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
+	reg |= MDIO_AN_CTRL1_ENABLE;
+	if (!(EFX_WORKAROUND_15195(efx) && LOOPBACK_EXTERNAL(efx)))
+		reg |= MDIO_AN_CTRL1_RESTART;
+	if (xnp)
+		reg |= MDIO_AN_CTRL1_XNP;
+	else
+		reg &= ~MDIO_AN_CTRL1_XNP;
+	efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
+}
+
 enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
 {
-	int lpa;
+	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
 
-	if (!(efx->phy_op->mmds & MDIO_DEVS_AN))
+	if (!(efx->wanted_fc & EFX_FC_AUTO))
 		return efx->wanted_fc;
-	lpa = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA);
-	return efx_fc_resolve(efx->wanted_fc, lpa);
+
+	WARN_ON(!(efx->mdio.mmds & MDIO_DEVS_AN));
+
+	return mii_resolve_flowctrl_fdx(
+		mii_advertise_flowctrl(efx->wanted_fc),
+		efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA));
 }
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 6b14421..f6ac950 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -1,6 +1,6 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -17,7 +17,6 @@
  */
 
 #include "efx.h"
-#include "boards.h"
 
 static inline unsigned efx_mdio_id_rev(u32 id) { return id & 0xf; }
 static inline unsigned efx_mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
@@ -87,6 +86,9 @@
 /* Set (some of) the PHY settings over MDIO */
 extern int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd);
 
+/* Push advertising flags and restart autonegotiation */
+extern void efx_mdio_an_reconfigure(struct efx_nic *efx);
+
 /* Get pause parameters from AN if available (otherwise return
  * requested pause parameters)
  */
diff --git a/drivers/net/sfc/mtd.c b/drivers/net/sfc/mtd.c
index 820c233..3a46452 100644
--- a/drivers/net/sfc/mtd.c
+++ b/drivers/net/sfc/mtd.c
@@ -1,36 +1,80 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
  * by the Free Software Foundation, incorporated herein by reference.
  */
 
+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/mtd/mtd.h>
 #include <linux/delay.h>
+#include <linux/rtnetlink.h>
 
 #define EFX_DRIVER_NAME "sfc_mtd"
 #include "net_driver.h"
 #include "spi.h"
 #include "efx.h"
+#include "nic.h"
+#include "mcdi.h"
+#include "mcdi_pcol.h"
 
 #define EFX_SPI_VERIFY_BUF_LEN 16
+#define EFX_MCDI_CHUNK_LEN 128
 
-struct efx_mtd {
-	const struct efx_spi_device *spi;
+struct efx_mtd_partition {
 	struct mtd_info mtd;
+	union {
+		struct {
+			bool updating;
+			u8 nvram_type;
+			u16 fw_subtype;
+		} mcdi;
+		size_t offset;
+	};
+	const char *type_name;
 	char name[IFNAMSIZ + 20];
 };
 
+struct efx_mtd_ops {
+	int (*read)(struct mtd_info *mtd, loff_t start, size_t len,
+		    size_t *retlen, u8 *buffer);
+	int (*erase)(struct mtd_info *mtd, loff_t start, size_t len);
+	int (*write)(struct mtd_info *mtd, loff_t start, size_t len,
+		     size_t *retlen, const u8 *buffer);
+	int (*sync)(struct mtd_info *mtd);
+};
+
+struct efx_mtd {
+	struct list_head node;
+	struct efx_nic *efx;
+	const struct efx_spi_device *spi;
+	const char *name;
+	const struct efx_mtd_ops *ops;
+	size_t n_parts;
+	struct efx_mtd_partition part[0];
+};
+
+#define efx_for_each_partition(part, efx_mtd)			\
+	for ((part) = &(efx_mtd)->part[0];			\
+	     (part) != &(efx_mtd)->part[(efx_mtd)->n_parts];	\
+	     (part)++)
+
+#define to_efx_mtd_partition(mtd)				\
+	container_of(mtd, struct efx_mtd_partition, mtd)
+
+static int falcon_mtd_probe(struct efx_nic *efx);
+static int siena_mtd_probe(struct efx_nic *efx);
+
 /* SPI utilities */
 
 static int efx_spi_slow_wait(struct efx_mtd *efx_mtd, bool uninterruptible)
 {
 	const struct efx_spi_device *spi = efx_mtd->spi;
-	struct efx_nic *efx = spi->efx;
+	struct efx_nic *efx = efx_mtd->efx;
 	u8 status;
 	int rc, i;
 
@@ -39,7 +83,7 @@
 		__set_current_state(uninterruptible ?
 				    TASK_UNINTERRUPTIBLE : TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ / 10);
-		rc = falcon_spi_cmd(spi, SPI_RDSR, -1, NULL,
+		rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL,
 				    &status, sizeof(status));
 		if (rc)
 			return rc;
@@ -52,32 +96,35 @@
 	return -ETIMEDOUT;
 }
 
-static int efx_spi_unlock(const struct efx_spi_device *spi)
+static int
+efx_spi_unlock(struct efx_nic *efx, const struct efx_spi_device *spi)
 {
 	const u8 unlock_mask = (SPI_STATUS_BP2 | SPI_STATUS_BP1 |
 				SPI_STATUS_BP0);
 	u8 status;
 	int rc;
 
-	rc = falcon_spi_cmd(spi, SPI_RDSR, -1, NULL, &status, sizeof(status));
+	rc = falcon_spi_cmd(efx, spi, SPI_RDSR, -1, NULL,
+			    &status, sizeof(status));
 	if (rc)
 		return rc;
 
 	if (!(status & unlock_mask))
 		return 0; /* already unlocked */
 
-	rc = falcon_spi_cmd(spi, SPI_WREN, -1, NULL, NULL, 0);
+	rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0);
 	if (rc)
 		return rc;
-	rc = falcon_spi_cmd(spi, SPI_SST_EWSR, -1, NULL, NULL, 0);
+	rc = falcon_spi_cmd(efx, spi, SPI_SST_EWSR, -1, NULL, NULL, 0);
 	if (rc)
 		return rc;
 
 	status &= ~unlock_mask;
-	rc = falcon_spi_cmd(spi, SPI_WRSR, -1, &status, NULL, sizeof(status));
+	rc = falcon_spi_cmd(efx, spi, SPI_WRSR, -1, &status,
+			    NULL, sizeof(status));
 	if (rc)
 		return rc;
-	rc = falcon_spi_wait_write(spi);
+	rc = falcon_spi_wait_write(efx, spi);
 	if (rc)
 		return rc;
 
@@ -87,6 +134,7 @@
 static int efx_spi_erase(struct efx_mtd *efx_mtd, loff_t start, size_t len)
 {
 	const struct efx_spi_device *spi = efx_mtd->spi;
+	struct efx_nic *efx = efx_mtd->efx;
 	unsigned pos, block_len;
 	u8 empty[EFX_SPI_VERIFY_BUF_LEN];
 	u8 buffer[EFX_SPI_VERIFY_BUF_LEN];
@@ -98,13 +146,14 @@
 	if (spi->erase_command == 0)
 		return -EOPNOTSUPP;
 
-	rc = efx_spi_unlock(spi);
+	rc = efx_spi_unlock(efx, spi);
 	if (rc)
 		return rc;
-	rc = falcon_spi_cmd(spi, SPI_WREN, -1, NULL, NULL, 0);
+	rc = falcon_spi_cmd(efx, spi, SPI_WREN, -1, NULL, NULL, 0);
 	if (rc)
 		return rc;
-	rc = falcon_spi_cmd(spi, spi->erase_command, start, NULL, NULL, 0);
+	rc = falcon_spi_cmd(efx, spi, spi->erase_command, start, NULL,
+			    NULL, 0);
 	if (rc)
 		return rc;
 	rc = efx_spi_slow_wait(efx_mtd, false);
@@ -113,7 +162,8 @@
 	memset(empty, 0xff, sizeof(empty));
 	for (pos = 0; pos < len; pos += block_len) {
 		block_len = min(len - pos, sizeof(buffer));
-		rc = falcon_spi_read(spi, start + pos, block_len, NULL, buffer);
+		rc = falcon_spi_read(efx, spi, start + pos, block_len,
+				     NULL, buffer);
 		if (rc)
 			return rc;
 		if (memcmp(empty, buffer, block_len))
@@ -130,36 +180,12 @@
 
 /* MTD interface */
 
-static int efx_mtd_read(struct mtd_info *mtd, loff_t start, size_t len,
-			size_t *retlen, u8 *buffer)
-{
-	struct efx_mtd *efx_mtd = mtd->priv;
-	const struct efx_spi_device *spi = efx_mtd->spi;
-	struct efx_nic *efx = spi->efx;
-	int rc;
-
-	rc = mutex_lock_interruptible(&efx->spi_lock);
-	if (rc)
-		return rc;
-	rc = falcon_spi_read(spi, FALCON_FLASH_BOOTCODE_START + start,
-			     len, retlen, buffer);
-	mutex_unlock(&efx->spi_lock);
-	return rc;
-}
-
 static int efx_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
 {
 	struct efx_mtd *efx_mtd = mtd->priv;
-	struct efx_nic *efx = efx_mtd->spi->efx;
 	int rc;
 
-	rc = mutex_lock_interruptible(&efx->spi_lock);
-	if (rc)
-		return rc;
-	rc = efx_spi_erase(efx_mtd, FALCON_FLASH_BOOTCODE_START + erase->addr,
-			   erase->len);
-	mutex_unlock(&efx->spi_lock);
-
+	rc = efx_mtd->ops->erase(mtd, erase->addr, erase->len);
 	if (rc == 0) {
 		erase->state = MTD_ERASE_DONE;
 	} else {
@@ -170,100 +196,457 @@
 	return rc;
 }
 
-static int efx_mtd_write(struct mtd_info *mtd, loff_t start,
-			 size_t len, size_t *retlen, const u8 *buffer)
+static void efx_mtd_sync(struct mtd_info *mtd)
 {
 	struct efx_mtd *efx_mtd = mtd->priv;
+	struct efx_nic *efx = efx_mtd->efx;
+	int rc;
+
+	rc = efx_mtd->ops->sync(mtd);
+	if (rc)
+		EFX_ERR(efx, "%s sync failed (%d)\n", efx_mtd->name, rc);
+}
+
+static void efx_mtd_remove_partition(struct efx_mtd_partition *part)
+{
+	int rc;
+
+	for (;;) {
+		rc = del_mtd_device(&part->mtd);
+		if (rc != -EBUSY)
+			break;
+		ssleep(1);
+	}
+	WARN_ON(rc);
+}
+
+static void efx_mtd_remove_device(struct efx_mtd *efx_mtd)
+{
+	struct efx_mtd_partition *part;
+
+	efx_for_each_partition(part, efx_mtd)
+		efx_mtd_remove_partition(part);
+	list_del(&efx_mtd->node);
+	kfree(efx_mtd);
+}
+
+static void efx_mtd_rename_device(struct efx_mtd *efx_mtd)
+{
+	struct efx_mtd_partition *part;
+
+	efx_for_each_partition(part, efx_mtd)
+		if (efx_nic_rev(efx_mtd->efx) >= EFX_REV_SIENA_A0)
+			snprintf(part->name, sizeof(part->name),
+				 "%s %s:%02x", efx_mtd->efx->name,
+				 part->type_name, part->mcdi.fw_subtype);
+		else
+			snprintf(part->name, sizeof(part->name),
+				 "%s %s", efx_mtd->efx->name,
+				 part->type_name);
+}
+
+static int efx_mtd_probe_device(struct efx_nic *efx, struct efx_mtd *efx_mtd)
+{
+	struct efx_mtd_partition *part;
+
+	efx_mtd->efx = efx;
+
+	efx_mtd_rename_device(efx_mtd);
+
+	efx_for_each_partition(part, efx_mtd) {
+		part->mtd.writesize = 1;
+
+		part->mtd.owner = THIS_MODULE;
+		part->mtd.priv = efx_mtd;
+		part->mtd.name = part->name;
+		part->mtd.erase = efx_mtd_erase;
+		part->mtd.read = efx_mtd->ops->read;
+		part->mtd.write = efx_mtd->ops->write;
+		part->mtd.sync = efx_mtd_sync;
+
+		if (add_mtd_device(&part->mtd))
+			goto fail;
+	}
+
+	list_add(&efx_mtd->node, &efx->mtd_list);
+	return 0;
+
+fail:
+	while (part != &efx_mtd->part[0]) {
+		--part;
+		efx_mtd_remove_partition(part);
+	}
+	/* add_mtd_device() returns 1 if the MTD table is full */
+	return -ENOMEM;
+}
+
+void efx_mtd_remove(struct efx_nic *efx)
+{
+	struct efx_mtd *efx_mtd, *next;
+
+	WARN_ON(efx_dev_registered(efx));
+
+	list_for_each_entry_safe(efx_mtd, next, &efx->mtd_list, node)
+		efx_mtd_remove_device(efx_mtd);
+}
+
+void efx_mtd_rename(struct efx_nic *efx)
+{
+	struct efx_mtd *efx_mtd;
+
+	ASSERT_RTNL();
+
+	list_for_each_entry(efx_mtd, &efx->mtd_list, node)
+		efx_mtd_rename_device(efx_mtd);
+}
+
+int efx_mtd_probe(struct efx_nic *efx)
+{
+	if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0)
+		return siena_mtd_probe(efx);
+	else
+		return falcon_mtd_probe(efx);
+}
+
+/* Implementation of MTD operations for Falcon */
+
+static int falcon_mtd_read(struct mtd_info *mtd, loff_t start,
+			   size_t len, size_t *retlen, u8 *buffer)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
 	const struct efx_spi_device *spi = efx_mtd->spi;
-	struct efx_nic *efx = spi->efx;
+	struct efx_nic *efx = efx_mtd->efx;
 	int rc;
 
 	rc = mutex_lock_interruptible(&efx->spi_lock);
 	if (rc)
 		return rc;
-	rc = falcon_spi_write(spi, FALCON_FLASH_BOOTCODE_START + start,
-			      len, retlen, buffer);
+	rc = falcon_spi_read(efx, spi, part->offset + start, len,
+			     retlen, buffer);
 	mutex_unlock(&efx->spi_lock);
 	return rc;
 }
 
-static void efx_mtd_sync(struct mtd_info *mtd)
+static int falcon_mtd_erase(struct mtd_info *mtd, loff_t start, size_t len)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
+	struct efx_nic *efx = efx_mtd->efx;
+	int rc;
+
+	rc = mutex_lock_interruptible(&efx->spi_lock);
+	if (rc)
+		return rc;
+	rc = efx_spi_erase(efx_mtd, part->offset + start, len);
+	mutex_unlock(&efx->spi_lock);
+	return rc;
+}
+
+static int falcon_mtd_write(struct mtd_info *mtd, loff_t start,
+			    size_t len, size_t *retlen, const u8 *buffer)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
+	const struct efx_spi_device *spi = efx_mtd->spi;
+	struct efx_nic *efx = efx_mtd->efx;
+	int rc;
+
+	rc = mutex_lock_interruptible(&efx->spi_lock);
+	if (rc)
+		return rc;
+	rc = falcon_spi_write(efx, spi, part->offset + start, len,
+			      retlen, buffer);
+	mutex_unlock(&efx->spi_lock);
+	return rc;
+}
+
+static int falcon_mtd_sync(struct mtd_info *mtd)
 {
 	struct efx_mtd *efx_mtd = mtd->priv;
-	struct efx_nic *efx = efx_mtd->spi->efx;
+	struct efx_nic *efx = efx_mtd->efx;
 	int rc;
 
 	mutex_lock(&efx->spi_lock);
 	rc = efx_spi_slow_wait(efx_mtd, true);
 	mutex_unlock(&efx->spi_lock);
-
-	if (rc)
-		EFX_ERR(efx, "%s sync failed (%d)\n", efx_mtd->name, rc);
-	return;
+	return rc;
 }
 
-void efx_mtd_remove(struct efx_nic *efx)
-{
-	if (efx->spi_flash && efx->spi_flash->mtd) {
-		struct efx_mtd *efx_mtd = efx->spi_flash->mtd;
-		int rc;
+static struct efx_mtd_ops falcon_mtd_ops = {
+	.read	= falcon_mtd_read,
+	.erase	= falcon_mtd_erase,
+	.write	= falcon_mtd_write,
+	.sync	= falcon_mtd_sync,
+};
 
-		for (;;) {
-			rc = del_mtd_device(&efx_mtd->mtd);
-			if (rc != -EBUSY)
-				break;
-			ssleep(1);
-		}
-		WARN_ON(rc);
-		kfree(efx_mtd);
-	}
-}
-
-void efx_mtd_rename(struct efx_nic *efx)
-{
-	if (efx->spi_flash && efx->spi_flash->mtd) {
-		struct efx_mtd *efx_mtd = efx->spi_flash->mtd;
-		snprintf(efx_mtd->name, sizeof(efx_mtd->name),
-			 "%s sfc_flash_bootrom", efx->name);
-	}
-}
-
-int efx_mtd_probe(struct efx_nic *efx)
+static int falcon_mtd_probe(struct efx_nic *efx)
 {
 	struct efx_spi_device *spi = efx->spi_flash;
 	struct efx_mtd *efx_mtd;
+	int rc;
+
+	ASSERT_RTNL();
 
 	if (!spi || spi->size <= FALCON_FLASH_BOOTCODE_START)
 		return -ENODEV;
 
-	efx_mtd = kzalloc(sizeof(*efx_mtd), GFP_KERNEL);
+	efx_mtd = kzalloc(sizeof(*efx_mtd) + sizeof(efx_mtd->part[0]),
+			  GFP_KERNEL);
 	if (!efx_mtd)
 		return -ENOMEM;
 
 	efx_mtd->spi = spi;
-	spi->mtd = efx_mtd;
+	efx_mtd->name = "flash";
+	efx_mtd->ops = &falcon_mtd_ops;
 
-	efx_mtd->mtd.type = MTD_NORFLASH;
-	efx_mtd->mtd.flags = MTD_CAP_NORFLASH;
-	efx_mtd->mtd.size = spi->size - FALCON_FLASH_BOOTCODE_START;
-	efx_mtd->mtd.erasesize = spi->erase_size;
-	efx_mtd->mtd.writesize = 1;
-	efx_mtd_rename(efx);
+	efx_mtd->n_parts = 1;
+	efx_mtd->part[0].mtd.type = MTD_NORFLASH;
+	efx_mtd->part[0].mtd.flags = MTD_CAP_NORFLASH;
+	efx_mtd->part[0].mtd.size = spi->size - FALCON_FLASH_BOOTCODE_START;
+	efx_mtd->part[0].mtd.erasesize = spi->erase_size;
+	efx_mtd->part[0].offset = FALCON_FLASH_BOOTCODE_START;
+	efx_mtd->part[0].type_name = "sfc_flash_bootrom";
 
-	efx_mtd->mtd.owner = THIS_MODULE;
-	efx_mtd->mtd.priv = efx_mtd;
-	efx_mtd->mtd.name = efx_mtd->name;
-	efx_mtd->mtd.erase = efx_mtd_erase;
-	efx_mtd->mtd.read = efx_mtd_read;
-	efx_mtd->mtd.write = efx_mtd_write;
-	efx_mtd->mtd.sync = efx_mtd_sync;
-
-	if (add_mtd_device(&efx_mtd->mtd)) {
+	rc = efx_mtd_probe_device(efx, efx_mtd);
+	if (rc)
 		kfree(efx_mtd);
-		spi->mtd = NULL;
-		/* add_mtd_device() returns 1 if the MTD table is full */
-		return -ENOMEM;
+	return rc;
+}
+
+/* Implementation of MTD operations for Siena */
+
+static int siena_mtd_read(struct mtd_info *mtd, loff_t start,
+			  size_t len, size_t *retlen, u8 *buffer)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
+	struct efx_nic *efx = efx_mtd->efx;
+	loff_t offset = start;
+	loff_t end = min_t(loff_t, start + len, mtd->size);
+	size_t chunk;
+	int rc = 0;
+
+	while (offset < end) {
+		chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+		rc = efx_mcdi_nvram_read(efx, part->mcdi.nvram_type, offset,
+					 buffer, chunk);
+		if (rc)
+			goto out;
+		offset += chunk;
+		buffer += chunk;
 	}
+out:
+	*retlen = offset - start;
+	return rc;
+}
+
+static int siena_mtd_erase(struct mtd_info *mtd, loff_t start, size_t len)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
+	struct efx_nic *efx = efx_mtd->efx;
+	loff_t offset = start & ~((loff_t)(mtd->erasesize - 1));
+	loff_t end = min_t(loff_t, start + len, mtd->size);
+	size_t chunk = part->mtd.erasesize;
+	int rc = 0;
+
+	if (!part->mcdi.updating) {
+		rc = efx_mcdi_nvram_update_start(efx, part->mcdi.nvram_type);
+		if (rc)
+			goto out;
+		part->mcdi.updating = 1;
+	}
+
+	/* The MCDI interface can in fact do multiple erase blocks at once;
+	 * but erasing may be slow, so we make multiple calls here to avoid
+	 * tripping the MCDI RPC timeout. */
+	while (offset < end) {
+		rc = efx_mcdi_nvram_erase(efx, part->mcdi.nvram_type, offset,
+					  chunk);
+		if (rc)
+			goto out;
+		offset += chunk;
+	}
+out:
+	return rc;
+}
+
+static int siena_mtd_write(struct mtd_info *mtd, loff_t start,
+			   size_t len, size_t *retlen, const u8 *buffer)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
+	struct efx_nic *efx = efx_mtd->efx;
+	loff_t offset = start;
+	loff_t end = min_t(loff_t, start + len, mtd->size);
+	size_t chunk;
+	int rc = 0;
+
+	if (!part->mcdi.updating) {
+		rc = efx_mcdi_nvram_update_start(efx, part->mcdi.nvram_type);
+		if (rc)
+			goto out;
+		part->mcdi.updating = 1;
+	}
+
+	while (offset < end) {
+		chunk = min_t(size_t, end - offset, EFX_MCDI_CHUNK_LEN);
+		rc = efx_mcdi_nvram_write(efx, part->mcdi.nvram_type, offset,
+					  buffer, chunk);
+		if (rc)
+			goto out;
+		offset += chunk;
+		buffer += chunk;
+	}
+out:
+	*retlen = offset - start;
+	return rc;
+}
+
+static int siena_mtd_sync(struct mtd_info *mtd)
+{
+	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
+	struct efx_mtd *efx_mtd = mtd->priv;
+	struct efx_nic *efx = efx_mtd->efx;
+	int rc = 0;
+
+	if (part->mcdi.updating) {
+		part->mcdi.updating = 0;
+		rc = efx_mcdi_nvram_update_finish(efx, part->mcdi.nvram_type);
+	}
+
+	return rc;
+}
+
+static struct efx_mtd_ops siena_mtd_ops = {
+	.read	= siena_mtd_read,
+	.erase	= siena_mtd_erase,
+	.write	= siena_mtd_write,
+	.sync	= siena_mtd_sync,
+};
+
+struct siena_nvram_type_info {
+	int port;
+	const char *name;
+};
+
+static struct siena_nvram_type_info siena_nvram_types[] = {
+	[MC_CMD_NVRAM_TYPE_DISABLED_CALLISTO]	= { 0, "sfc_dummy_phy" },
+	[MC_CMD_NVRAM_TYPE_MC_FW]		= { 0, "sfc_mcfw" },
+	[MC_CMD_NVRAM_TYPE_MC_FW_BACKUP]	= { 0, "sfc_mcfw_backup" },
+	[MC_CMD_NVRAM_TYPE_STATIC_CFG_PORT0]	= { 0, "sfc_static_cfg" },
+	[MC_CMD_NVRAM_TYPE_STATIC_CFG_PORT1]	= { 1, "sfc_static_cfg" },
+	[MC_CMD_NVRAM_TYPE_DYNAMIC_CFG_PORT0]	= { 0, "sfc_dynamic_cfg" },
+	[MC_CMD_NVRAM_TYPE_DYNAMIC_CFG_PORT1]	= { 1, "sfc_dynamic_cfg" },
+	[MC_CMD_NVRAM_TYPE_EXP_ROM]		= { 0, "sfc_exp_rom" },
+	[MC_CMD_NVRAM_TYPE_EXP_ROM_CFG_PORT0]	= { 0, "sfc_exp_rom_cfg" },
+	[MC_CMD_NVRAM_TYPE_EXP_ROM_CFG_PORT1]	= { 1, "sfc_exp_rom_cfg" },
+	[MC_CMD_NVRAM_TYPE_PHY_PORT0]		= { 0, "sfc_phy_fw" },
+	[MC_CMD_NVRAM_TYPE_PHY_PORT1]		= { 1, "sfc_phy_fw" },
+};
+
+static int siena_mtd_probe_partition(struct efx_nic *efx,
+				     struct efx_mtd *efx_mtd,
+				     unsigned int part_id,
+				     unsigned int type)
+{
+	struct efx_mtd_partition *part = &efx_mtd->part[part_id];
+	struct siena_nvram_type_info *info;
+	size_t size, erase_size;
+	bool protected;
+	int rc;
+
+	if (type >= ARRAY_SIZE(siena_nvram_types))
+		return -ENODEV;
+
+	info = &siena_nvram_types[type];
+
+	if (info->port != efx_port_num(efx))
+		return -ENODEV;
+
+	rc = efx_mcdi_nvram_info(efx, type, &size, &erase_size, &protected);
+	if (rc)
+		return rc;
+	if (protected)
+		return -ENODEV; /* hide it */
+
+	part->mcdi.nvram_type = type;
+	part->type_name = info->name;
+
+	part->mtd.type = MTD_NORFLASH;
+	part->mtd.flags = MTD_CAP_NORFLASH;
+	part->mtd.size = size;
+	part->mtd.erasesize = erase_size;
 
 	return 0;
 }
+
+static int siena_mtd_get_fw_subtypes(struct efx_nic *efx,
+				     struct efx_mtd *efx_mtd)
+{
+	struct efx_mtd_partition *part;
+	uint16_t fw_subtype_list[MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN /
+				 sizeof(uint16_t)];
+	int rc;
+
+	rc = efx_mcdi_get_board_cfg(efx, NULL, fw_subtype_list);
+	if (rc)
+		return rc;
+
+	efx_for_each_partition(part, efx_mtd)
+		part->mcdi.fw_subtype = fw_subtype_list[part->mcdi.nvram_type];
+
+	return 0;
+}
+
+static int siena_mtd_probe(struct efx_nic *efx)
+{
+	struct efx_mtd *efx_mtd;
+	int rc = -ENODEV;
+	u32 nvram_types;
+	unsigned int type;
+
+	ASSERT_RTNL();
+
+	rc = efx_mcdi_nvram_types(efx, &nvram_types);
+	if (rc)
+		return rc;
+
+	efx_mtd = kzalloc(sizeof(*efx_mtd) +
+			  hweight32(nvram_types) * sizeof(efx_mtd->part[0]),
+			  GFP_KERNEL);
+	if (!efx_mtd)
+		return -ENOMEM;
+
+	efx_mtd->name = "Siena NVRAM manager";
+
+	efx_mtd->ops = &siena_mtd_ops;
+
+	type = 0;
+	efx_mtd->n_parts = 0;
+
+	while (nvram_types != 0) {
+		if (nvram_types & 1) {
+			rc = siena_mtd_probe_partition(efx, efx_mtd,
+						       efx_mtd->n_parts, type);
+			if (rc == 0)
+				efx_mtd->n_parts++;
+			else if (rc != -ENODEV)
+				goto fail;
+		}
+		type++;
+		nvram_types >>= 1;
+	}
+
+	rc = siena_mtd_get_fw_subtypes(efx, efx_mtd);
+	if (rc)
+		goto fail;
+
+	rc = efx_mtd_probe_device(efx, efx_mtd);
+fail:
+	if (rc)
+		kfree(efx_mtd);
+	return rc;
+}
+
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 298566d..34c381f 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2005-2008 Solarflare Communications Inc.
+ * Copyright 2005-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -38,7 +38,7 @@
 #ifndef EFX_DRIVER_NAME
 #define EFX_DRIVER_NAME	"sfc"
 #endif
-#define EFX_DRIVER_VERSION	"2.3"
+#define EFX_DRIVER_VERSION	"3.0"
 
 #ifdef EFX_ENABLE_DEBUG
 #define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
@@ -113,6 +113,13 @@
 	int entries;
 };
 
+enum efx_flush_state {
+	FLUSH_NONE,
+	FLUSH_PENDING,
+	FLUSH_FAILED,
+	FLUSH_DONE,
+};
+
 /**
  * struct efx_tx_buffer - An Efx TX buffer
  * @skb: The associated socket buffer.
@@ -189,7 +196,7 @@
 	struct efx_nic *nic;
 	struct efx_tx_buffer *buffer;
 	struct efx_special_buffer txd;
-	bool flushed;
+	enum efx_flush_state flushed;
 
 	/* Members used mainly on the completion path */
 	unsigned int read_count ____cacheline_aligned_in_smp;
@@ -284,7 +291,7 @@
 	struct page *buf_page;
 	dma_addr_t buf_dma_addr;
 	char *buf_data;
-	bool flushed;
+	enum efx_flush_state flushed;
 };
 
 /**
@@ -327,7 +334,7 @@
  * @used_flags: Channel is used by net driver
  * @enabled: Channel enabled indicator
  * @irq: IRQ number (MSI and MSI-X only)
- * @irq_moderation: IRQ moderation value (in us)
+ * @irq_moderation: IRQ moderation value (in hardware ticks)
  * @napi_dev: Net device used with NAPI
  * @napi_str: NAPI control structure
  * @reset_work: Scheduled reset work thread
@@ -343,9 +350,9 @@
  * @rx_alloc_push_pages: RX allocation method currently in use for pushing
  *	descriptors
  * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
- * @n_rx_ip_frag_err: Count of RX IP fragment errors
  * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
  * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
+ * @n_rx_mcast_mismatch: Count of unmatched multicast frames
  * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
  * @n_rx_overlength: Count of RX_OVERLENGTH errors
  * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
@@ -373,9 +380,9 @@
 	int rx_alloc_push_pages;
 
 	unsigned n_rx_tobe_disc;
-	unsigned n_rx_ip_frag_err;
 	unsigned n_rx_ip_hdr_chksum_err;
 	unsigned n_rx_tcp_udp_chksum_err;
+	unsigned n_rx_mcast_mismatch;
 	unsigned n_rx_frm_trunc;
 	unsigned n_rx_overlength;
 	unsigned n_skbuff_leaks;
@@ -388,53 +395,29 @@
 
 };
 
-/**
- * struct efx_blinker - S/W LED blinking context
- * @state: Current state - on or off
- * @resubmit: Timer resubmission flag
- * @timer: Control timer for blinking
- */
-struct efx_blinker {
-	bool state;
-	bool resubmit;
-	struct timer_list timer;
+enum efx_led_mode {
+	EFX_LED_OFF	= 0,
+	EFX_LED_ON	= 1,
+	EFX_LED_DEFAULT	= 2
 };
 
+#define STRING_TABLE_LOOKUP(val, member) \
+	((val) < member ## _max) ? member ## _names[val] : "(invalid)"
 
-/**
- * struct efx_board - board information
- * @type: Board model type
- * @major: Major rev. ('A', 'B' ...)
- * @minor: Minor rev. (0, 1, ...)
- * @init: Initialisation function
- * @init_leds: Sets up board LEDs. May be called repeatedly.
- * @set_id_led: Turns the identification LED on or off
- * @blink: Starts/stops blinking
- * @monitor: Board-specific health check function
- * @fini: Cleanup function
- * @blinker: used to blink LEDs in software
- * @hwmon_client: I2C client for hardware monitor
- * @ioexp_client: I2C client for power/port control
- */
-struct efx_board {
-	int type;
-	int major;
-	int minor;
-	int (*init) (struct efx_nic *nic);
-	/* As the LEDs are typically attached to the PHY, LEDs
-	 * have a separate init callback that happens later than
-	 * board init. */
-	void (*init_leds)(struct efx_nic *efx);
-	void (*set_id_led) (struct efx_nic *efx, bool state);
-	int (*monitor) (struct efx_nic *nic);
-	void (*blink) (struct efx_nic *efx, bool start);
-	void (*fini) (struct efx_nic *nic);
-	struct efx_blinker blinker;
-	struct i2c_client *hwmon_client, *ioexp_client;
-};
+extern const char *efx_loopback_mode_names[];
+extern const unsigned int efx_loopback_mode_max;
+#define LOOPBACK_MODE(efx) \
+	STRING_TABLE_LOOKUP((efx)->loopback_mode, efx_loopback_mode)
 
-#define STRING_TABLE_LOOKUP(val, member)	\
-	member ## _names[val]
+extern const char *efx_interrupt_mode_names[];
+extern const unsigned int efx_interrupt_mode_max;
+#define INT_MODE(efx) \
+	STRING_TABLE_LOOKUP(efx->interrupt_mode, efx_interrupt_mode)
+
+extern const char *efx_reset_type_names[];
+extern const unsigned int efx_reset_type_max;
+#define RESET_TYPE(type) \
+	STRING_TABLE_LOOKUP(type, efx_reset_type)
 
 enum efx_int_mode {
 	/* Be careful if altering to correct macro below */
@@ -445,20 +428,7 @@
 };
 #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
 
-enum phy_type {
-	PHY_TYPE_NONE = 0,
-	PHY_TYPE_TXC43128 = 1,
-	PHY_TYPE_88E1111 = 2,
-	PHY_TYPE_SFX7101 = 3,
-	PHY_TYPE_QT2022C2 = 4,
-	PHY_TYPE_PM8358 = 6,
-	PHY_TYPE_SFT9001A = 8,
-	PHY_TYPE_QT2025C = 9,
-	PHY_TYPE_SFT9001B = 10,
-	PHY_TYPE_MAX	/* Insert any new items before this */
-};
-
-#define EFX_IS10G(efx) ((efx)->link_speed == 10000)
+#define EFX_IS10G(efx) ((efx)->link_state.speed == 10000)
 
 enum nic_state {
 	STATE_INIT = 0,
@@ -500,73 +470,69 @@
 	EFX_FC_AUTO = 4,
 };
 
-/* Supported MAC bit-mask */
-enum efx_mac_type {
-	EFX_GMAC = 1,
-	EFX_XMAC = 2,
+/**
+ * struct efx_link_state - Current state of the link
+ * @up: Link is up
+ * @fd: Link is full-duplex
+ * @fc: Actual flow control flags
+ * @speed: Link speed (Mbps)
+ */
+struct efx_link_state {
+	bool up;
+	bool fd;
+	enum efx_fc_type fc;
+	unsigned int speed;
 };
 
-static inline enum efx_fc_type efx_fc_resolve(enum efx_fc_type wanted_fc,
-					      unsigned int lpa)
+static inline bool efx_link_state_equal(const struct efx_link_state *left,
+					const struct efx_link_state *right)
 {
-	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
-
-	if (!(wanted_fc & EFX_FC_AUTO))
-		return wanted_fc;
-
-	return mii_resolve_flowctrl_fdx(mii_advertise_flowctrl(wanted_fc), lpa);
+	return left->up == right->up && left->fd == right->fd &&
+		left->fc == right->fc && left->speed == right->speed;
 }
 
 /**
  * struct efx_mac_operations - Efx MAC operations table
  * @reconfigure: Reconfigure MAC. Serialised by the mac_lock
  * @update_stats: Update statistics
- * @irq: Hardware MAC event callback. Serialised by the mac_lock
- * @poll: Poll for hardware state. Serialised by the mac_lock
+ * @check_fault: Check fault state. True if fault present.
  */
 struct efx_mac_operations {
-	void (*reconfigure) (struct efx_nic *efx);
+	int (*reconfigure) (struct efx_nic *efx);
 	void (*update_stats) (struct efx_nic *efx);
-	void (*irq) (struct efx_nic *efx);
-	void (*poll) (struct efx_nic *efx);
+	bool (*check_fault)(struct efx_nic *efx);
 };
 
 /**
  * struct efx_phy_operations - Efx PHY operations table
+ * @probe: Probe PHY and initialise efx->mdio.mode_support, efx->mdio.mmds,
+ *	efx->loopback_modes.
  * @init: Initialise PHY
  * @fini: Shut down PHY
  * @reconfigure: Reconfigure PHY (e.g. for new link parameters)
- * @clear_interrupt: Clear down interrupt
- * @blink: Blink LEDs
- * @poll: Poll for hardware state. Serialised by the mac_lock.
+ * @poll: Update @link_state and report whether it changed.
+ *	Serialised by the mac_lock.
  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
  * @set_npage_adv: Set abilities advertised in (Extended) Next Page
  *	(only needed where AN bit is set in mmds)
- * @num_tests: Number of PHY-specific tests/results
- * @test_names: Names of the tests/results
+ * @test_name: Get the name of a PHY-specific test/result
  * @run_tests: Run tests and record results as appropriate.
  *	Flags are the ethtool tests flags.
- * @mmds: MMD presence mask
- * @loopbacks: Supported loopback modes mask
  */
 struct efx_phy_operations {
-	enum efx_mac_type macs;
+	int (*probe) (struct efx_nic *efx);
 	int (*init) (struct efx_nic *efx);
 	void (*fini) (struct efx_nic *efx);
-	void (*reconfigure) (struct efx_nic *efx);
-	void (*clear_interrupt) (struct efx_nic *efx);
-	void (*poll) (struct efx_nic *efx);
+	int (*reconfigure) (struct efx_nic *efx);
+	bool (*poll) (struct efx_nic *efx);
 	void (*get_settings) (struct efx_nic *efx,
 			      struct ethtool_cmd *ecmd);
 	int (*set_settings) (struct efx_nic *efx,
 			     struct ethtool_cmd *ecmd);
 	void (*set_npage_adv) (struct efx_nic *efx, u32);
-	u32 num_tests;
-	const char *const *test_names;
+	const char *(*test_name) (struct efx_nic *efx, unsigned int index);
 	int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
-	int mmds;
-	unsigned loopbacks;
 };
 
 /**
@@ -690,36 +656,38 @@
  * @interrupt_mode: Interrupt mode
  * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues
  * @irq_rx_moderation: IRQ moderation time for RX event queues
- * @i2c_adap: I2C adapter
- * @board_info: Board-level information
  * @state: Device state flag. Serialised by the rtnl_lock.
  * @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
  * @tx_queue: TX DMA queues
  * @rx_queue: RX DMA queues
  * @channel: Channels
+ * @next_buffer_table: First available buffer table id
  * @n_rx_queues: Number of RX queues
  * @n_channels: Number of channels in use
  * @rx_buffer_len: RX buffer length
  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
+ * @int_error_count: Number of internal errors seen recently
+ * @int_error_expire: Time at which error count will be expired
  * @irq_status: Interrupt status buffer
  * @last_irq_cpu: Last CPU to handle interrupt.
  *	This register is written with the SMP processor ID whenever an
  *	interrupt is handled.  It is used by falcon_test_interrupt()
  *	to verify that an interrupt has occurred.
  * @spi_flash: SPI flash device
- *	This field will be %NULL if no flash device is present.
+ *	This field will be %NULL if no flash device is present (or for Siena).
  * @spi_eeprom: SPI EEPROM device
- *	This field will be %NULL if no EEPROM device is present.
+ *	This field will be %NULL if no EEPROM device is present (or for Siena).
  * @spi_lock: SPI bus lock
+ * @mtd_list: List of MTDs attached to the NIC
  * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
  * @nic_data: Hardware dependant state
  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
  *	@port_inhibited, efx_monitor() and efx_reconfigure_port()
  * @port_enabled: Port enabled indicator.
- *	Serialises efx_stop_all(), efx_start_all(), efx_monitor(),
- *	efx_phy_work(), and efx_mac_work() with kernel interfaces. Safe to read
- *	under any one of the rtnl_lock, mac_lock, or netif_tx_lock, but all
- *	three must be held to modify it.
+ *	Serialises efx_stop_all(), efx_start_all(), efx_monitor() and
+ *	efx_mac_work() with kernel interfaces. Safe to read under any
+ *	one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
+ *	be held to modify it.
  * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
  * @port_initialized: Port initialized?
  * @net_dev: Operating system network device. Consider holding the rtnl lock
@@ -731,26 +699,23 @@
  *	&struct net_device_stats.
  * @stats_buffer: DMA buffer for statistics
  * @stats_lock: Statistics update lock. Serialises statistics fetches
- * @stats_disable_count: Nest count for disabling statistics fetches
  * @mac_op: MAC interface
  * @mac_address: Permanent MAC address
  * @phy_type: PHY type
- * @phy_lock: PHY access lock
+ * @mdio_lock: MDIO lock
  * @phy_op: PHY interface
  * @phy_data: PHY private data (including PHY-specific stats)
  * @mdio: PHY MDIO interface
+ * @mdio_bus: PHY MDIO bus ID (only used by Siena)
  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
- * @mac_up: MAC link state
- * @link_up: Link status
- * @link_fd: Link is full duplex
- * @link_fc: Actualy flow control flags
- * @link_speed: Link speed (Mbps)
+ * @xmac_poll_required: XMAC link state needs polling
+ * @link_advertising: Autonegotiation advertising flags
+ * @link_state: Current state of the link
  * @n_link_state_changes: Number of times the link has changed state
  * @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
  * @multicast_hash: Multicast hash table
  * @wanted_fc: Wanted flow control flags
- * @phy_work: work item for dealing with PHY events
- * @mac_work: work item for dealing with MAC events
+ * @mac_work: Work item for changing MAC promiscuity and multicast hash
  * @loopback_mode: Loopback status
  * @loopback_modes: Supported loopback mode bitmask
  * @loopback_selftest: Offline self-test private state
@@ -774,9 +739,6 @@
 	bool irq_rx_adaptive;
 	unsigned int irq_rx_moderation;
 
-	struct i2c_adapter i2c_adap;
-	struct efx_board board_info;
-
 	enum nic_state state;
 	enum reset_type reset_pending;
 
@@ -784,21 +746,29 @@
 	struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
 	struct efx_channel channel[EFX_MAX_CHANNELS];
 
+	unsigned next_buffer_table;
 	int n_rx_queues;
 	int n_channels;
 	unsigned int rx_buffer_len;
 	unsigned int rx_buffer_order;
 
+	unsigned int_error_count;
+	unsigned long int_error_expire;
+
 	struct efx_buffer irq_status;
 	volatile signed int last_irq_cpu;
+	unsigned long irq_zero_count;
 
 	struct efx_spi_device *spi_flash;
 	struct efx_spi_device *spi_eeprom;
 	struct mutex spi_lock;
+#ifdef CONFIG_SFC_MTD
+	struct list_head mtd_list;
+#endif
 
 	unsigned n_rx_nodesc_drop_cnt;
 
-	struct falcon_nic_data *nic_data;
+	void *nic_data;
 
 	struct mutex mac_lock;
 	struct work_struct mac_work;
@@ -815,24 +785,21 @@
 	struct efx_mac_stats mac_stats;
 	struct efx_buffer stats_buffer;
 	spinlock_t stats_lock;
-	unsigned int stats_disable_count;
 
 	struct efx_mac_operations *mac_op;
 	unsigned char mac_address[ETH_ALEN];
 
-	enum phy_type phy_type;
-	spinlock_t phy_lock;
-	struct work_struct phy_work;
+	unsigned int phy_type;
+	struct mutex mdio_lock;
 	struct efx_phy_operations *phy_op;
 	void *phy_data;
 	struct mdio_if_info mdio;
+	unsigned int mdio_bus;
 	enum efx_phy_mode phy_mode;
 
-	bool mac_up;
-	bool link_up;
-	bool link_fd;
-	enum efx_fc_type link_fc;
-	unsigned int link_speed;
+	bool xmac_poll_required;
+	u32 link_advertising;
+	struct efx_link_state link_state;
 	unsigned int n_link_state_changes;
 
 	bool promiscuous;
@@ -841,7 +808,7 @@
 
 	atomic_t rx_reset;
 	enum efx_loopback_mode loopback_mode;
-	unsigned int loopback_modes;
+	u64 loopback_modes;
 
 	void *loopback_selftest;
 };
@@ -860,50 +827,95 @@
 	return efx_dev_registered(efx) ? efx->name : "";
 }
 
+static inline unsigned int efx_port_num(struct efx_nic *efx)
+{
+	return PCI_FUNC(efx->pci_dev->devfn);
+}
+
 /**
  * struct efx_nic_type - Efx device type definition
- * @mem_bar: Memory BAR number
+ * @probe: Probe the controller
+ * @remove: Free resources allocated by probe()
+ * @init: Initialise the controller
+ * @fini: Shut down the controller
+ * @monitor: Periodic function for polling link state and hardware monitor
+ * @reset: Reset the controller hardware and possibly the PHY.  This will
+ *	be called while the controller is uninitialised.
+ * @probe_port: Probe the MAC and PHY
+ * @remove_port: Free resources allocated by probe_port()
+ * @prepare_flush: Prepare the hardware for flushing the DMA queues
+ * @update_stats: Update statistics not provided by event handling
+ * @start_stats: Start the regular fetching of statistics
+ * @stop_stats: Stop the regular fetching of statistics
+ * @set_id_led: Set state of identifying LED or revert to automatic function
+ * @push_irq_moderation: Apply interrupt moderation value
+ * @push_multicast_hash: Apply multicast hash table
+ * @reconfigure_port: Push loopback/power/txdis changes to the MAC and PHY
+ * @get_wol: Get WoL configuration from driver state
+ * @set_wol: Push WoL configuration to the NIC
+ * @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume)
+ * @test_registers: Test read/write functionality of control registers
+ * @test_nvram: Test validity of NVRAM contents
+ * @default_mac_ops: efx_mac_operations to set at startup
+ * @revision: Hardware architecture revision
  * @mem_map_size: Memory BAR mapped size
  * @txd_ptr_tbl_base: TX descriptor ring base address
  * @rxd_ptr_tbl_base: RX descriptor ring base address
  * @buf_tbl_base: Buffer table base address
  * @evq_ptr_tbl_base: Event queue pointer table base address
  * @evq_rptr_tbl_base: Event queue read-pointer table base address
- * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1)
- * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1)
- * @evq_size: Event queue size (must be a power of two)
  * @max_dma_mask: Maximum possible DMA mask
- * @tx_dma_mask: TX DMA mask
- * @bug5391_mask: Address mask for bug 5391 workaround
- * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes)
- * @rx_xon_thresh: RX FIFO XON watermark (bytes)
  * @rx_buffer_padding: Padding added to each RX buffer
  * @max_interrupt_mode: Highest capability interrupt mode supported
  *	from &enum efx_init_mode.
  * @phys_addr_channels: Number of channels with physically addressed
  *	descriptors
+ * @tx_dc_base: Base address in SRAM of TX queue descriptor caches
+ * @rx_dc_base: Base address in SRAM of RX queue descriptor caches
+ * @offload_features: net_device feature flags for protocol offload
+ *	features implemented in hardware
+ * @reset_world_flags: Flags for additional components covered by
+ *	reset method RESET_TYPE_WORLD
  */
 struct efx_nic_type {
-	unsigned int mem_bar;
+	int (*probe)(struct efx_nic *efx);
+	void (*remove)(struct efx_nic *efx);
+	int (*init)(struct efx_nic *efx);
+	void (*fini)(struct efx_nic *efx);
+	void (*monitor)(struct efx_nic *efx);
+	int (*reset)(struct efx_nic *efx, enum reset_type method);
+	int (*probe_port)(struct efx_nic *efx);
+	void (*remove_port)(struct efx_nic *efx);
+	void (*prepare_flush)(struct efx_nic *efx);
+	void (*update_stats)(struct efx_nic *efx);
+	void (*start_stats)(struct efx_nic *efx);
+	void (*stop_stats)(struct efx_nic *efx);
+	void (*set_id_led)(struct efx_nic *efx, enum efx_led_mode mode);
+	void (*push_irq_moderation)(struct efx_channel *channel);
+	void (*push_multicast_hash)(struct efx_nic *efx);
+	int (*reconfigure_port)(struct efx_nic *efx);
+	void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol);
+	int (*set_wol)(struct efx_nic *efx, u32 type);
+	void (*resume_wol)(struct efx_nic *efx);
+	int (*test_registers)(struct efx_nic *efx);
+	int (*test_nvram)(struct efx_nic *efx);
+	struct efx_mac_operations *default_mac_ops;
+
+	int revision;
 	unsigned int mem_map_size;
 	unsigned int txd_ptr_tbl_base;
 	unsigned int rxd_ptr_tbl_base;
 	unsigned int buf_tbl_base;
 	unsigned int evq_ptr_tbl_base;
 	unsigned int evq_rptr_tbl_base;
-
-	unsigned int txd_ring_mask;
-	unsigned int rxd_ring_mask;
-	unsigned int evq_size;
 	u64 max_dma_mask;
-	unsigned int tx_dma_mask;
-	unsigned bug5391_mask;
-
-	int rx_xoff_thresh;
-	int rx_xon_thresh;
 	unsigned int rx_buffer_padding;
 	unsigned int max_interrupt_mode;
 	unsigned int phys_addr_channels;
+	unsigned int tx_dc_base;
+	unsigned int rx_dc_base;
+	unsigned long offload_features;
+	u32 reset_world_flags;
 };
 
 /**************************************************************************
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
new file mode 100644
index 0000000..a577be2
--- /dev/null
+++ b/drivers/net/sfc/nic.c
@@ -0,0 +1,1583 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include "net_driver.h"
+#include "bitfield.h"
+#include "efx.h"
+#include "nic.h"
+#include "regs.h"
+#include "io.h"
+#include "workarounds.h"
+
+/**************************************************************************
+ *
+ * Configurable values
+ *
+ **************************************************************************
+ */
+
+/* This is set to 16 for a good reason.  In summary, if larger than
+ * 16, the descriptor cache holds more than a default socket
+ * buffer's worth of packets (for UDP we can only have at most one
+ * socket buffer's worth outstanding).  This combined with the fact
+ * that we only get 1 TX event per descriptor cache means the NIC
+ * goes idle.
+ */
+#define TX_DC_ENTRIES 16
+#define TX_DC_ENTRIES_ORDER 1
+
+#define RX_DC_ENTRIES 64
+#define RX_DC_ENTRIES_ORDER 3
+
+/* RX FIFO XOFF watermark
+ *
+ * When the amount of the RX FIFO increases used increases past this
+ * watermark send XOFF. Only used if RX flow control is enabled (ethtool -A)
+ * This also has an effect on RX/TX arbitration
+ */
+int efx_nic_rx_xoff_thresh = -1;
+module_param_named(rx_xoff_thresh_bytes, efx_nic_rx_xoff_thresh, int, 0644);
+MODULE_PARM_DESC(rx_xoff_thresh_bytes, "RX fifo XOFF threshold");
+
+/* RX FIFO XON watermark
+ *
+ * When the amount of the RX FIFO used decreases below this
+ * watermark send XON. Only used if TX flow control is enabled (ethtool -A)
+ * This also has an effect on RX/TX arbitration
+ */
+int efx_nic_rx_xon_thresh = -1;
+module_param_named(rx_xon_thresh_bytes, efx_nic_rx_xon_thresh, int, 0644);
+MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold");
+
+/* If EFX_MAX_INT_ERRORS internal errors occur within
+ * EFX_INT_ERROR_EXPIRE seconds, we consider the NIC broken and
+ * disable it.
+ */
+#define EFX_INT_ERROR_EXPIRE 3600
+#define EFX_MAX_INT_ERRORS 5
+
+/* We poll for events every FLUSH_INTERVAL ms, and check FLUSH_POLL_COUNT times
+ */
+#define EFX_FLUSH_INTERVAL 10
+#define EFX_FLUSH_POLL_COUNT 100
+
+/* Size and alignment of special buffers (4KB) */
+#define EFX_BUF_SIZE 4096
+
+/* Depth of RX flush request fifo */
+#define EFX_RX_FLUSH_COUNT 4
+
+/**************************************************************************
+ *
+ * Solarstorm hardware access
+ *
+ **************************************************************************/
+
+static inline void efx_write_buf_tbl(struct efx_nic *efx, efx_qword_t *value,
+				     unsigned int index)
+{
+	efx_sram_writeq(efx, efx->membase + efx->type->buf_tbl_base,
+			value, index);
+}
+
+/* Read the current event from the event queue */
+static inline efx_qword_t *efx_event(struct efx_channel *channel,
+				     unsigned int index)
+{
+	return (((efx_qword_t *) (channel->eventq.addr)) + index);
+}
+
+/* See if an event is present
+ *
+ * We check both the high and low dword of the event for all ones.  We
+ * wrote all ones when we cleared the event, and no valid event can
+ * have all ones in either its high or low dwords.  This approach is
+ * robust against reordering.
+ *
+ * Note that using a single 64-bit comparison is incorrect; even
+ * though the CPU read will be atomic, the DMA write may not be.
+ */
+static inline int efx_event_present(efx_qword_t *event)
+{
+	return (!(EFX_DWORD_IS_ALL_ONES(event->dword[0]) |
+		  EFX_DWORD_IS_ALL_ONES(event->dword[1])));
+}
+
+static bool efx_masked_compare_oword(const efx_oword_t *a, const efx_oword_t *b,
+				     const efx_oword_t *mask)
+{
+	return ((a->u64[0] ^ b->u64[0]) & mask->u64[0]) ||
+		((a->u64[1] ^ b->u64[1]) & mask->u64[1]);
+}
+
+int efx_nic_test_registers(struct efx_nic *efx,
+			   const struct efx_nic_register_test *regs,
+			   size_t n_regs)
+{
+	unsigned address = 0, i, j;
+	efx_oword_t mask, imask, original, reg, buf;
+
+	/* Falcon should be in loopback to isolate the XMAC from the PHY */
+	WARN_ON(!LOOPBACK_INTERNAL(efx));
+
+	for (i = 0; i < n_regs; ++i) {
+		address = regs[i].address;
+		mask = imask = regs[i].mask;
+		EFX_INVERT_OWORD(imask);
+
+		efx_reado(efx, &original, address);
+
+		/* bit sweep on and off */
+		for (j = 0; j < 128; j++) {
+			if (!EFX_EXTRACT_OWORD32(mask, j, j))
+				continue;
+
+			/* Test this testable bit can be set in isolation */
+			EFX_AND_OWORD(reg, original, mask);
+			EFX_SET_OWORD32(reg, j, j, 1);
+
+			efx_writeo(efx, &reg, address);
+			efx_reado(efx, &buf, address);
+
+			if (efx_masked_compare_oword(&reg, &buf, &mask))
+				goto fail;
+
+			/* Test this testable bit can be cleared in isolation */
+			EFX_OR_OWORD(reg, original, mask);
+			EFX_SET_OWORD32(reg, j, j, 0);
+
+			efx_writeo(efx, &reg, address);
+			efx_reado(efx, &buf, address);
+
+			if (efx_masked_compare_oword(&reg, &buf, &mask))
+				goto fail;
+		}
+
+		efx_writeo(efx, &original, address);
+	}
+
+	return 0;
+
+fail:
+	EFX_ERR(efx, "wrote "EFX_OWORD_FMT" read "EFX_OWORD_FMT
+		" at address 0x%x mask "EFX_OWORD_FMT"\n", EFX_OWORD_VAL(reg),
+		EFX_OWORD_VAL(buf), address, EFX_OWORD_VAL(mask));
+	return -EIO;
+}
+
+/**************************************************************************
+ *
+ * Special buffer handling
+ * Special buffers are used for event queues and the TX and RX
+ * descriptor rings.
+ *
+ *************************************************************************/
+
+/*
+ * Initialise a special buffer
+ *
+ * This will define a buffer (previously allocated via
+ * efx_alloc_special_buffer()) in the buffer table, allowing
+ * it to be used for event queues, descriptor rings etc.
+ */
+static void
+efx_init_special_buffer(struct efx_nic *efx, struct efx_special_buffer *buffer)
+{
+	efx_qword_t buf_desc;
+	int index;
+	dma_addr_t dma_addr;
+	int i;
+
+	EFX_BUG_ON_PARANOID(!buffer->addr);
+
+	/* Write buffer descriptors to NIC */
+	for (i = 0; i < buffer->entries; i++) {
+		index = buffer->index + i;
+		dma_addr = buffer->dma_addr + (i * 4096);
+		EFX_LOG(efx, "mapping special buffer %d at %llx\n",
+			index, (unsigned long long)dma_addr);
+		EFX_POPULATE_QWORD_3(buf_desc,
+				     FRF_AZ_BUF_ADR_REGION, 0,
+				     FRF_AZ_BUF_ADR_FBUF, dma_addr >> 12,
+				     FRF_AZ_BUF_OWNER_ID_FBUF, 0);
+		efx_write_buf_tbl(efx, &buf_desc, index);
+	}
+}
+
+/* Unmaps a buffer and clears the buffer table entries */
+static void
+efx_fini_special_buffer(struct efx_nic *efx, struct efx_special_buffer *buffer)
+{
+	efx_oword_t buf_tbl_upd;
+	unsigned int start = buffer->index;
+	unsigned int end = (buffer->index + buffer->entries - 1);
+
+	if (!buffer->entries)
+		return;
+
+	EFX_LOG(efx, "unmapping special buffers %d-%d\n",
+		buffer->index, buffer->index + buffer->entries - 1);
+
+	EFX_POPULATE_OWORD_4(buf_tbl_upd,
+			     FRF_AZ_BUF_UPD_CMD, 0,
+			     FRF_AZ_BUF_CLR_CMD, 1,
+			     FRF_AZ_BUF_CLR_END_ID, end,
+			     FRF_AZ_BUF_CLR_START_ID, start);
+	efx_writeo(efx, &buf_tbl_upd, FR_AZ_BUF_TBL_UPD);
+}
+
+/*
+ * Allocate a new special buffer
+ *
+ * This allocates memory for a new buffer, clears it and allocates a
+ * new buffer ID range.  It does not write into the buffer table.
+ *
+ * This call will allocate 4KB buffers, since 8KB buffers can't be
+ * used for event queues and descriptor rings.
+ */
+static int efx_alloc_special_buffer(struct efx_nic *efx,
+				    struct efx_special_buffer *buffer,
+				    unsigned int len)
+{
+	len = ALIGN(len, EFX_BUF_SIZE);
+
+	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
+					    &buffer->dma_addr);
+	if (!buffer->addr)
+		return -ENOMEM;
+	buffer->len = len;
+	buffer->entries = len / EFX_BUF_SIZE;
+	BUG_ON(buffer->dma_addr & (EFX_BUF_SIZE - 1));
+
+	/* All zeros is a potentially valid event so memset to 0xff */
+	memset(buffer->addr, 0xff, len);
+
+	/* Select new buffer ID */
+	buffer->index = efx->next_buffer_table;
+	efx->next_buffer_table += buffer->entries;
+
+	EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x "
+		"(virt %p phys %llx)\n", buffer->index,
+		buffer->index + buffer->entries - 1,
+		(u64)buffer->dma_addr, len,
+		buffer->addr, (u64)virt_to_phys(buffer->addr));
+
+	return 0;
+}
+
+static void
+efx_free_special_buffer(struct efx_nic *efx, struct efx_special_buffer *buffer)
+{
+	if (!buffer->addr)
+		return;
+
+	EFX_LOG(efx, "deallocating special buffers %d-%d at %llx+%x "
+		"(virt %p phys %llx)\n", buffer->index,
+		buffer->index + buffer->entries - 1,
+		(u64)buffer->dma_addr, buffer->len,
+		buffer->addr, (u64)virt_to_phys(buffer->addr));
+
+	pci_free_consistent(efx->pci_dev, buffer->len, buffer->addr,
+			    buffer->dma_addr);
+	buffer->addr = NULL;
+	buffer->entries = 0;
+}
+
+/**************************************************************************
+ *
+ * Generic buffer handling
+ * These buffers are used for interrupt status and MAC stats
+ *
+ **************************************************************************/
+
+int efx_nic_alloc_buffer(struct efx_nic *efx, struct efx_buffer *buffer,
+			 unsigned int len)
+{
+	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
+					    &buffer->dma_addr);
+	if (!buffer->addr)
+		return -ENOMEM;
+	buffer->len = len;
+	memset(buffer->addr, 0, len);
+	return 0;
+}
+
+void efx_nic_free_buffer(struct efx_nic *efx, struct efx_buffer *buffer)
+{
+	if (buffer->addr) {
+		pci_free_consistent(efx->pci_dev, buffer->len,
+				    buffer->addr, buffer->dma_addr);
+		buffer->addr = NULL;
+	}
+}
+
+/**************************************************************************
+ *
+ * TX path
+ *
+ **************************************************************************/
+
+/* Returns a pointer to the specified transmit descriptor in the TX
+ * descriptor queue belonging to the specified channel.
+ */
+static inline efx_qword_t *
+efx_tx_desc(struct efx_tx_queue *tx_queue, unsigned int index)
+{
+	return (((efx_qword_t *) (tx_queue->txd.addr)) + index);
+}
+
+/* This writes to the TX_DESC_WPTR; write pointer for TX descriptor ring */
+static inline void efx_notify_tx_desc(struct efx_tx_queue *tx_queue)
+{
+	unsigned write_ptr;
+	efx_dword_t reg;
+
+	write_ptr = tx_queue->write_count & EFX_TXQ_MASK;
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_TX_DESC_WPTR_DWORD, write_ptr);
+	efx_writed_page(tx_queue->efx, &reg,
+			FR_AZ_TX_DESC_UPD_DWORD_P0, tx_queue->queue);
+}
+
+
+/* For each entry inserted into the software descriptor ring, create a
+ * descriptor in the hardware TX descriptor ring (in host memory), and
+ * write a doorbell.
+ */
+void efx_nic_push_buffers(struct efx_tx_queue *tx_queue)
+{
+
+	struct efx_tx_buffer *buffer;
+	efx_qword_t *txd;
+	unsigned write_ptr;
+
+	BUG_ON(tx_queue->write_count == tx_queue->insert_count);
+
+	do {
+		write_ptr = tx_queue->write_count & EFX_TXQ_MASK;
+		buffer = &tx_queue->buffer[write_ptr];
+		txd = efx_tx_desc(tx_queue, write_ptr);
+		++tx_queue->write_count;
+
+		/* Create TX descriptor ring entry */
+		EFX_POPULATE_QWORD_4(*txd,
+				     FSF_AZ_TX_KER_CONT, buffer->continuation,
+				     FSF_AZ_TX_KER_BYTE_COUNT, buffer->len,
+				     FSF_AZ_TX_KER_BUF_REGION, 0,
+				     FSF_AZ_TX_KER_BUF_ADDR, buffer->dma_addr);
+	} while (tx_queue->write_count != tx_queue->insert_count);
+
+	wmb(); /* Ensure descriptors are written before they are fetched */
+	efx_notify_tx_desc(tx_queue);
+}
+
+/* Allocate hardware resources for a TX queue */
+int efx_nic_probe_tx(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	BUILD_BUG_ON(EFX_TXQ_SIZE < 512 || EFX_TXQ_SIZE > 4096 ||
+		     EFX_TXQ_SIZE & EFX_TXQ_MASK);
+	return efx_alloc_special_buffer(efx, &tx_queue->txd,
+					EFX_TXQ_SIZE * sizeof(efx_qword_t));
+}
+
+void efx_nic_init_tx(struct efx_tx_queue *tx_queue)
+{
+	efx_oword_t tx_desc_ptr;
+	struct efx_nic *efx = tx_queue->efx;
+
+	tx_queue->flushed = FLUSH_NONE;
+
+	/* Pin TX descriptor ring */
+	efx_init_special_buffer(efx, &tx_queue->txd);
+
+	/* Push TX descriptor ring to card */
+	EFX_POPULATE_OWORD_10(tx_desc_ptr,
+			      FRF_AZ_TX_DESCQ_EN, 1,
+			      FRF_AZ_TX_ISCSI_DDIG_EN, 0,
+			      FRF_AZ_TX_ISCSI_HDIG_EN, 0,
+			      FRF_AZ_TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index,
+			      FRF_AZ_TX_DESCQ_EVQ_ID,
+			      tx_queue->channel->channel,
+			      FRF_AZ_TX_DESCQ_OWNER_ID, 0,
+			      FRF_AZ_TX_DESCQ_LABEL, tx_queue->queue,
+			      FRF_AZ_TX_DESCQ_SIZE,
+			      __ffs(tx_queue->txd.entries),
+			      FRF_AZ_TX_DESCQ_TYPE, 0,
+			      FRF_BZ_TX_NON_IP_DROP_DIS, 1);
+
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) {
+		int csum = tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM;
+		EFX_SET_OWORD_FIELD(tx_desc_ptr, FRF_BZ_TX_IP_CHKSM_DIS, !csum);
+		EFX_SET_OWORD_FIELD(tx_desc_ptr, FRF_BZ_TX_TCP_CHKSM_DIS,
+				    !csum);
+	}
+
+	efx_writeo_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
+			 tx_queue->queue);
+
+	if (efx_nic_rev(efx) < EFX_REV_FALCON_B0) {
+		efx_oword_t reg;
+
+		/* Only 128 bits in this register */
+		BUILD_BUG_ON(EFX_TX_QUEUE_COUNT >= 128);
+
+		efx_reado(efx, &reg, FR_AA_TX_CHKSM_CFG);
+		if (tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM)
+			clear_bit_le(tx_queue->queue, (void *)&reg);
+		else
+			set_bit_le(tx_queue->queue, (void *)&reg);
+		efx_writeo(efx, &reg, FR_AA_TX_CHKSM_CFG);
+	}
+}
+
+static void efx_flush_tx_queue(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	efx_oword_t tx_flush_descq;
+
+	tx_queue->flushed = FLUSH_PENDING;
+
+	/* Post a flush command */
+	EFX_POPULATE_OWORD_2(tx_flush_descq,
+			     FRF_AZ_TX_FLUSH_DESCQ_CMD, 1,
+			     FRF_AZ_TX_FLUSH_DESCQ, tx_queue->queue);
+	efx_writeo(efx, &tx_flush_descq, FR_AZ_TX_FLUSH_DESCQ);
+}
+
+void efx_nic_fini_tx(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	efx_oword_t tx_desc_ptr;
+
+	/* The queue should have been flushed */
+	WARN_ON(tx_queue->flushed != FLUSH_DONE);
+
+	/* Remove TX descriptor ring from card */
+	EFX_ZERO_OWORD(tx_desc_ptr);
+	efx_writeo_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
+			 tx_queue->queue);
+
+	/* Unpin TX descriptor ring */
+	efx_fini_special_buffer(efx, &tx_queue->txd);
+}
+
+/* Free buffers backing TX queue */
+void efx_nic_remove_tx(struct efx_tx_queue *tx_queue)
+{
+	efx_free_special_buffer(tx_queue->efx, &tx_queue->txd);
+}
+
+/**************************************************************************
+ *
+ * RX path
+ *
+ **************************************************************************/
+
+/* Returns a pointer to the specified descriptor in the RX descriptor queue */
+static inline efx_qword_t *
+efx_rx_desc(struct efx_rx_queue *rx_queue, unsigned int index)
+{
+	return (((efx_qword_t *) (rx_queue->rxd.addr)) + index);
+}
+
+/* This creates an entry in the RX descriptor queue */
+static inline void
+efx_build_rx_desc(struct efx_rx_queue *rx_queue, unsigned index)
+{
+	struct efx_rx_buffer *rx_buf;
+	efx_qword_t *rxd;
+
+	rxd = efx_rx_desc(rx_queue, index);
+	rx_buf = efx_rx_buffer(rx_queue, index);
+	EFX_POPULATE_QWORD_3(*rxd,
+			     FSF_AZ_RX_KER_BUF_SIZE,
+			     rx_buf->len -
+			     rx_queue->efx->type->rx_buffer_padding,
+			     FSF_AZ_RX_KER_BUF_REGION, 0,
+			     FSF_AZ_RX_KER_BUF_ADDR, rx_buf->dma_addr);
+}
+
+/* This writes to the RX_DESC_WPTR register for the specified receive
+ * descriptor ring.
+ */
+void efx_nic_notify_rx_desc(struct efx_rx_queue *rx_queue)
+{
+	efx_dword_t reg;
+	unsigned write_ptr;
+
+	while (rx_queue->notified_count != rx_queue->added_count) {
+		efx_build_rx_desc(rx_queue,
+				  rx_queue->notified_count &
+				  EFX_RXQ_MASK);
+		++rx_queue->notified_count;
+	}
+
+	wmb();
+	write_ptr = rx_queue->added_count & EFX_RXQ_MASK;
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_RX_DESC_WPTR_DWORD, write_ptr);
+	efx_writed_page(rx_queue->efx, &reg,
+			FR_AZ_RX_DESC_UPD_DWORD_P0, rx_queue->queue);
+}
+
+int efx_nic_probe_rx(struct efx_rx_queue *rx_queue)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	BUILD_BUG_ON(EFX_RXQ_SIZE < 512 || EFX_RXQ_SIZE > 4096 ||
+		     EFX_RXQ_SIZE & EFX_RXQ_MASK);
+	return efx_alloc_special_buffer(efx, &rx_queue->rxd,
+					EFX_RXQ_SIZE * sizeof(efx_qword_t));
+}
+
+void efx_nic_init_rx(struct efx_rx_queue *rx_queue)
+{
+	efx_oword_t rx_desc_ptr;
+	struct efx_nic *efx = rx_queue->efx;
+	bool is_b0 = efx_nic_rev(efx) >= EFX_REV_FALCON_B0;
+	bool iscsi_digest_en = is_b0;
+
+	EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
+		rx_queue->queue, rx_queue->rxd.index,
+		rx_queue->rxd.index + rx_queue->rxd.entries - 1);
+
+	rx_queue->flushed = FLUSH_NONE;
+
+	/* Pin RX descriptor ring */
+	efx_init_special_buffer(efx, &rx_queue->rxd);
+
+	/* Push RX descriptor ring to card */
+	EFX_POPULATE_OWORD_10(rx_desc_ptr,
+			      FRF_AZ_RX_ISCSI_DDIG_EN, iscsi_digest_en,
+			      FRF_AZ_RX_ISCSI_HDIG_EN, iscsi_digest_en,
+			      FRF_AZ_RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index,
+			      FRF_AZ_RX_DESCQ_EVQ_ID,
+			      rx_queue->channel->channel,
+			      FRF_AZ_RX_DESCQ_OWNER_ID, 0,
+			      FRF_AZ_RX_DESCQ_LABEL, rx_queue->queue,
+			      FRF_AZ_RX_DESCQ_SIZE,
+			      __ffs(rx_queue->rxd.entries),
+			      FRF_AZ_RX_DESCQ_TYPE, 0 /* kernel queue */ ,
+			      /* For >=B0 this is scatter so disable */
+			      FRF_AZ_RX_DESCQ_JUMBO, !is_b0,
+			      FRF_AZ_RX_DESCQ_EN, 1);
+	efx_writeo_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
+			 rx_queue->queue);
+}
+
+static void efx_flush_rx_queue(struct efx_rx_queue *rx_queue)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	efx_oword_t rx_flush_descq;
+
+	rx_queue->flushed = FLUSH_PENDING;
+
+	/* Post a flush command */
+	EFX_POPULATE_OWORD_2(rx_flush_descq,
+			     FRF_AZ_RX_FLUSH_DESCQ_CMD, 1,
+			     FRF_AZ_RX_FLUSH_DESCQ, rx_queue->queue);
+	efx_writeo(efx, &rx_flush_descq, FR_AZ_RX_FLUSH_DESCQ);
+}
+
+void efx_nic_fini_rx(struct efx_rx_queue *rx_queue)
+{
+	efx_oword_t rx_desc_ptr;
+	struct efx_nic *efx = rx_queue->efx;
+
+	/* The queue should already have been flushed */
+	WARN_ON(rx_queue->flushed != FLUSH_DONE);
+
+	/* Remove RX descriptor ring from card */
+	EFX_ZERO_OWORD(rx_desc_ptr);
+	efx_writeo_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
+			 rx_queue->queue);
+
+	/* Unpin RX descriptor ring */
+	efx_fini_special_buffer(efx, &rx_queue->rxd);
+}
+
+/* Free buffers backing RX queue */
+void efx_nic_remove_rx(struct efx_rx_queue *rx_queue)
+{
+	efx_free_special_buffer(rx_queue->efx, &rx_queue->rxd);
+}
+
+/**************************************************************************
+ *
+ * Event queue processing
+ * Event queues are processed by per-channel tasklets.
+ *
+ **************************************************************************/
+
+/* Update a channel's event queue's read pointer (RPTR) register
+ *
+ * This writes the EVQ_RPTR_REG register for the specified channel's
+ * event queue.
+ *
+ * Note that EVQ_RPTR_REG contains the index of the "last read" event,
+ * whereas channel->eventq_read_ptr contains the index of the "next to
+ * read" event.
+ */
+void efx_nic_eventq_read_ack(struct efx_channel *channel)
+{
+	efx_dword_t reg;
+	struct efx_nic *efx = channel->efx;
+
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_EVQ_RPTR, channel->eventq_read_ptr);
+	efx_writed_table(efx, &reg, efx->type->evq_rptr_tbl_base,
+			 channel->channel);
+}
+
+/* Use HW to insert a SW defined event */
+void efx_generate_event(struct efx_channel *channel, efx_qword_t *event)
+{
+	efx_oword_t drv_ev_reg;
+
+	BUILD_BUG_ON(FRF_AZ_DRV_EV_DATA_LBN != 0 ||
+		     FRF_AZ_DRV_EV_DATA_WIDTH != 64);
+	drv_ev_reg.u32[0] = event->u32[0];
+	drv_ev_reg.u32[1] = event->u32[1];
+	drv_ev_reg.u32[2] = 0;
+	drv_ev_reg.u32[3] = 0;
+	EFX_SET_OWORD_FIELD(drv_ev_reg, FRF_AZ_DRV_EV_QID, channel->channel);
+	efx_writeo(channel->efx, &drv_ev_reg, FR_AZ_DRV_EV);
+}
+
+/* Handle a transmit completion event
+ *
+ * The NIC batches TX completion events; the message we receive is of
+ * the form "complete all TX events up to this index".
+ */
+static void
+efx_handle_tx_event(struct efx_channel *channel, efx_qword_t *event)
+{
+	unsigned int tx_ev_desc_ptr;
+	unsigned int tx_ev_q_label;
+	struct efx_tx_queue *tx_queue;
+	struct efx_nic *efx = channel->efx;
+
+	if (likely(EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_COMP))) {
+		/* Transmit completion */
+		tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_DESC_PTR);
+		tx_ev_q_label = EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_Q_LABEL);
+		tx_queue = &efx->tx_queue[tx_ev_q_label];
+		channel->irq_mod_score +=
+			(tx_ev_desc_ptr - tx_queue->read_count) &
+			EFX_TXQ_MASK;
+		efx_xmit_done(tx_queue, tx_ev_desc_ptr);
+	} else if (EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_WQ_FF_FULL)) {
+		/* Rewrite the FIFO write pointer */
+		tx_ev_q_label = EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_Q_LABEL);
+		tx_queue = &efx->tx_queue[tx_ev_q_label];
+
+		if (efx_dev_registered(efx))
+			netif_tx_lock(efx->net_dev);
+		efx_notify_tx_desc(tx_queue);
+		if (efx_dev_registered(efx))
+			netif_tx_unlock(efx->net_dev);
+	} else if (EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_PKT_ERR) &&
+		   EFX_WORKAROUND_10727(efx)) {
+		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
+	} else {
+		EFX_ERR(efx, "channel %d unexpected TX event "
+			EFX_QWORD_FMT"\n", channel->channel,
+			EFX_QWORD_VAL(*event));
+	}
+}
+
+/* Detect errors included in the rx_evt_pkt_ok bit. */
+static void efx_handle_rx_not_ok(struct efx_rx_queue *rx_queue,
+				 const efx_qword_t *event,
+				 bool *rx_ev_pkt_ok,
+				 bool *discard)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	bool rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err;
+	bool rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err;
+	bool rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc;
+	bool rx_ev_other_err, rx_ev_pause_frm;
+	bool rx_ev_hdr_type, rx_ev_mcast_pkt;
+	unsigned rx_ev_pkt_type;
+
+	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_HDR_TYPE);
+	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_PKT);
+	rx_ev_tobe_disc = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_TOBE_DISC);
+	rx_ev_pkt_type = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_PKT_TYPE);
+	rx_ev_buf_owner_id_err = EFX_QWORD_FIELD(*event,
+						 FSF_AZ_RX_EV_BUF_OWNER_ID_ERR);
+	rx_ev_ip_hdr_chksum_err = EFX_QWORD_FIELD(*event,
+						  FSF_AZ_RX_EV_IP_HDR_CHKSUM_ERR);
+	rx_ev_tcp_udp_chksum_err = EFX_QWORD_FIELD(*event,
+						   FSF_AZ_RX_EV_TCP_UDP_CHKSUM_ERR);
+	rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_ETH_CRC_ERR);
+	rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_FRM_TRUNC);
+	rx_ev_drib_nib = ((efx_nic_rev(efx) >= EFX_REV_FALCON_B0) ?
+			  0 : EFX_QWORD_FIELD(*event, FSF_AA_RX_EV_DRIB_NIB));
+	rx_ev_pause_frm = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_PAUSE_FRM_ERR);
+
+	/* Every error apart from tobe_disc and pause_frm */
+	rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err |
+			   rx_ev_buf_owner_id_err | rx_ev_eth_crc_err |
+			   rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err);
+
+	/* Count errors that are not in MAC stats.  Ignore expected
+	 * checksum errors during self-test. */
+	if (rx_ev_frm_trunc)
+		++rx_queue->channel->n_rx_frm_trunc;
+	else if (rx_ev_tobe_disc)
+		++rx_queue->channel->n_rx_tobe_disc;
+	else if (!efx->loopback_selftest) {
+		if (rx_ev_ip_hdr_chksum_err)
+			++rx_queue->channel->n_rx_ip_hdr_chksum_err;
+		else if (rx_ev_tcp_udp_chksum_err)
+			++rx_queue->channel->n_rx_tcp_udp_chksum_err;
+	}
+
+	/* The frame must be discarded if any of these are true. */
+	*discard = (rx_ev_eth_crc_err | rx_ev_frm_trunc | rx_ev_drib_nib |
+		    rx_ev_tobe_disc | rx_ev_pause_frm);
+
+	/* TOBE_DISC is expected on unicast mismatches; don't print out an
+	 * error message.  FRM_TRUNC indicates RXDP dropped the packet due
+	 * to a FIFO overflow.
+	 */
+#ifdef EFX_ENABLE_DEBUG
+	if (rx_ev_other_err) {
+		EFX_INFO_RL(efx, " RX queue %d unexpected RX event "
+			    EFX_QWORD_FMT "%s%s%s%s%s%s%s%s\n",
+			    rx_queue->queue, EFX_QWORD_VAL(*event),
+			    rx_ev_buf_owner_id_err ? " [OWNER_ID_ERR]" : "",
+			    rx_ev_ip_hdr_chksum_err ?
+			    " [IP_HDR_CHKSUM_ERR]" : "",
+			    rx_ev_tcp_udp_chksum_err ?
+			    " [TCP_UDP_CHKSUM_ERR]" : "",
+			    rx_ev_eth_crc_err ? " [ETH_CRC_ERR]" : "",
+			    rx_ev_frm_trunc ? " [FRM_TRUNC]" : "",
+			    rx_ev_drib_nib ? " [DRIB_NIB]" : "",
+			    rx_ev_tobe_disc ? " [TOBE_DISC]" : "",
+			    rx_ev_pause_frm ? " [PAUSE]" : "");
+	}
+#endif
+}
+
+/* Handle receive events that are not in-order. */
+static void
+efx_handle_rx_bad_index(struct efx_rx_queue *rx_queue, unsigned index)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	unsigned expected, dropped;
+
+	expected = rx_queue->removed_count & EFX_RXQ_MASK;
+	dropped = (index - expected) & EFX_RXQ_MASK;
+	EFX_INFO(efx, "dropped %d events (index=%d expected=%d)\n",
+		dropped, index, expected);
+
+	efx_schedule_reset(efx, EFX_WORKAROUND_5676(efx) ?
+			   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
+}
+
+/* Handle a packet received event
+ *
+ * The NIC gives a "discard" flag if it's a unicast packet with the
+ * wrong destination address
+ * Also "is multicast" and "matches multicast filter" flags can be used to
+ * discard non-matching multicast packets.
+ */
+static void
+efx_handle_rx_event(struct efx_channel *channel, const efx_qword_t *event)
+{
+	unsigned int rx_ev_desc_ptr, rx_ev_byte_cnt;
+	unsigned int rx_ev_hdr_type, rx_ev_mcast_pkt;
+	unsigned expected_ptr;
+	bool rx_ev_pkt_ok, discard = false, checksummed;
+	struct efx_rx_queue *rx_queue;
+	struct efx_nic *efx = channel->efx;
+
+	/* Basic packet information */
+	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_BYTE_CNT);
+	rx_ev_pkt_ok = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_PKT_OK);
+	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_HDR_TYPE);
+	WARN_ON(EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_JUMBO_CONT));
+	WARN_ON(EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_SOP) != 1);
+	WARN_ON(EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_Q_LABEL) !=
+		channel->channel);
+
+	rx_queue = &efx->rx_queue[channel->channel];
+
+	rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_DESC_PTR);
+	expected_ptr = rx_queue->removed_count & EFX_RXQ_MASK;
+	if (unlikely(rx_ev_desc_ptr != expected_ptr))
+		efx_handle_rx_bad_index(rx_queue, rx_ev_desc_ptr);
+
+	if (likely(rx_ev_pkt_ok)) {
+		/* If packet is marked as OK and packet type is TCP/IP or
+		 * UDP/IP, then we can rely on the hardware checksum.
+		 */
+		checksummed =
+			likely(efx->rx_checksum_enabled) &&
+			(rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP ||
+			 rx_ev_hdr_type == FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP);
+	} else {
+		efx_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok, &discard);
+		checksummed = false;
+	}
+
+	/* Detect multicast packets that didn't match the filter */
+	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_PKT);
+	if (rx_ev_mcast_pkt) {
+		unsigned int rx_ev_mcast_hash_match =
+			EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_HASH_MATCH);
+
+		if (unlikely(!rx_ev_mcast_hash_match)) {
+			++channel->n_rx_mcast_mismatch;
+			discard = true;
+		}
+	}
+
+	channel->irq_mod_score += 2;
+
+	/* Handle received packet */
+	efx_rx_packet(rx_queue, rx_ev_desc_ptr, rx_ev_byte_cnt,
+		      checksummed, discard);
+}
+
+/* Global events are basically PHY events */
+static void
+efx_handle_global_event(struct efx_channel *channel, efx_qword_t *event)
+{
+	struct efx_nic *efx = channel->efx;
+	bool handled = false;
+
+	if (EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_G_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XG_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XFP_PHY0_INTR)) {
+		/* Ignored */
+		handled = true;
+	}
+
+	if ((efx_nic_rev(efx) >= EFX_REV_FALCON_B0) &&
+	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_XG_MGT_INTR)) {
+		efx->xmac_poll_required = true;
+		handled = true;
+	}
+
+	if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1 ?
+	    EFX_QWORD_FIELD(*event, FSF_AA_GLB_EV_RX_RECOVERY) :
+	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_RX_RECOVERY)) {
+		EFX_ERR(efx, "channel %d seen global RX_RESET "
+			"event. Resetting.\n", channel->channel);
+
+		atomic_inc(&efx->rx_reset);
+		efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ?
+				   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
+		handled = true;
+	}
+
+	if (!handled)
+		EFX_ERR(efx, "channel %d unknown global event "
+			EFX_QWORD_FMT "\n", channel->channel,
+			EFX_QWORD_VAL(*event));
+}
+
+static void
+efx_handle_driver_event(struct efx_channel *channel, efx_qword_t *event)
+{
+	struct efx_nic *efx = channel->efx;
+	unsigned int ev_sub_code;
+	unsigned int ev_sub_data;
+
+	ev_sub_code = EFX_QWORD_FIELD(*event, FSF_AZ_DRIVER_EV_SUBCODE);
+	ev_sub_data = EFX_QWORD_FIELD(*event, FSF_AZ_DRIVER_EV_SUBDATA);
+
+	switch (ev_sub_code) {
+	case FSE_AZ_TX_DESCQ_FLS_DONE_EV:
+		EFX_TRACE(efx, "channel %d TXQ %d flushed\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case FSE_AZ_RX_DESCQ_FLS_DONE_EV:
+		EFX_TRACE(efx, "channel %d RXQ %d flushed\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case FSE_AZ_EVQ_INIT_DONE_EV:
+		EFX_LOG(efx, "channel %d EVQ %d initialised\n",
+			channel->channel, ev_sub_data);
+		break;
+	case FSE_AZ_SRM_UPD_DONE_EV:
+		EFX_TRACE(efx, "channel %d SRAM update done\n",
+			  channel->channel);
+		break;
+	case FSE_AZ_WAKE_UP_EV:
+		EFX_TRACE(efx, "channel %d RXQ %d wakeup event\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case FSE_AZ_TIMER_EV:
+		EFX_TRACE(efx, "channel %d RX queue %d timer expired\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case FSE_AA_RX_RECOVER_EV:
+		EFX_ERR(efx, "channel %d seen DRIVER RX_RESET event. "
+			"Resetting.\n", channel->channel);
+		atomic_inc(&efx->rx_reset);
+		efx_schedule_reset(efx,
+				   EFX_WORKAROUND_6555(efx) ?
+				   RESET_TYPE_RX_RECOVERY :
+				   RESET_TYPE_DISABLE);
+		break;
+	case FSE_BZ_RX_DSC_ERROR_EV:
+		EFX_ERR(efx, "RX DMA Q %d reports descriptor fetch error."
+			" RX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
+		efx_schedule_reset(efx, RESET_TYPE_RX_DESC_FETCH);
+		break;
+	case FSE_BZ_TX_DSC_ERROR_EV:
+		EFX_ERR(efx, "TX DMA Q %d reports descriptor fetch error."
+			" TX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
+		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
+		break;
+	default:
+		EFX_TRACE(efx, "channel %d unknown driver event code %d "
+			  "data %04x\n", channel->channel, ev_sub_code,
+			  ev_sub_data);
+		break;
+	}
+}
+
+int efx_nic_process_eventq(struct efx_channel *channel, int rx_quota)
+{
+	unsigned int read_ptr;
+	efx_qword_t event, *p_event;
+	int ev_code;
+	int rx_packets = 0;
+
+	read_ptr = channel->eventq_read_ptr;
+
+	do {
+		p_event = efx_event(channel, read_ptr);
+		event = *p_event;
+
+		if (!efx_event_present(&event))
+			/* End of events */
+			break;
+
+		EFX_TRACE(channel->efx, "channel %d event is "EFX_QWORD_FMT"\n",
+			  channel->channel, EFX_QWORD_VAL(event));
+
+		/* Clear this event by marking it all ones */
+		EFX_SET_QWORD(*p_event);
+
+		ev_code = EFX_QWORD_FIELD(event, FSF_AZ_EV_CODE);
+
+		switch (ev_code) {
+		case FSE_AZ_EV_CODE_RX_EV:
+			efx_handle_rx_event(channel, &event);
+			++rx_packets;
+			break;
+		case FSE_AZ_EV_CODE_TX_EV:
+			efx_handle_tx_event(channel, &event);
+			break;
+		case FSE_AZ_EV_CODE_DRV_GEN_EV:
+			channel->eventq_magic = EFX_QWORD_FIELD(
+				event, FSF_AZ_DRV_GEN_EV_MAGIC);
+			EFX_LOG(channel->efx, "channel %d received generated "
+				"event "EFX_QWORD_FMT"\n", channel->channel,
+				EFX_QWORD_VAL(event));
+			break;
+		case FSE_AZ_EV_CODE_GLOBAL_EV:
+			efx_handle_global_event(channel, &event);
+			break;
+		case FSE_AZ_EV_CODE_DRIVER_EV:
+			efx_handle_driver_event(channel, &event);
+			break;
+		case FSE_CZ_EV_CODE_MCDI_EV:
+			efx_mcdi_process_event(channel, &event);
+			break;
+		default:
+			EFX_ERR(channel->efx, "channel %d unknown event type %d"
+				" (data " EFX_QWORD_FMT ")\n", channel->channel,
+				ev_code, EFX_QWORD_VAL(event));
+		}
+
+		/* Increment read pointer */
+		read_ptr = (read_ptr + 1) & EFX_EVQ_MASK;
+
+	} while (rx_packets < rx_quota);
+
+	channel->eventq_read_ptr = read_ptr;
+	return rx_packets;
+}
+
+
+/* Allocate buffer table entries for event queue */
+int efx_nic_probe_eventq(struct efx_channel *channel)
+{
+	struct efx_nic *efx = channel->efx;
+	BUILD_BUG_ON(EFX_EVQ_SIZE < 512 || EFX_EVQ_SIZE > 32768 ||
+		     EFX_EVQ_SIZE & EFX_EVQ_MASK);
+	return efx_alloc_special_buffer(efx, &channel->eventq,
+					EFX_EVQ_SIZE * sizeof(efx_qword_t));
+}
+
+void efx_nic_init_eventq(struct efx_channel *channel)
+{
+	efx_oword_t reg;
+	struct efx_nic *efx = channel->efx;
+
+	EFX_LOG(efx, "channel %d event queue in special buffers %d-%d\n",
+		channel->channel, channel->eventq.index,
+		channel->eventq.index + channel->eventq.entries - 1);
+
+	if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) {
+		EFX_POPULATE_OWORD_3(reg,
+				     FRF_CZ_TIMER_Q_EN, 1,
+				     FRF_CZ_HOST_NOTIFY_MODE, 0,
+				     FRF_CZ_TIMER_MODE, FFE_CZ_TIMER_MODE_DIS);
+		efx_writeo_table(efx, &reg, FR_BZ_TIMER_TBL, channel->channel);
+	}
+
+	/* Pin event queue buffer */
+	efx_init_special_buffer(efx, &channel->eventq);
+
+	/* Fill event queue with all ones (i.e. empty events) */
+	memset(channel->eventq.addr, 0xff, channel->eventq.len);
+
+	/* Push event queue to card */
+	EFX_POPULATE_OWORD_3(reg,
+			     FRF_AZ_EVQ_EN, 1,
+			     FRF_AZ_EVQ_SIZE, __ffs(channel->eventq.entries),
+			     FRF_AZ_EVQ_BUF_BASE_ID, channel->eventq.index);
+	efx_writeo_table(efx, &reg, efx->type->evq_ptr_tbl_base,
+			 channel->channel);
+
+	efx->type->push_irq_moderation(channel);
+}
+
+void efx_nic_fini_eventq(struct efx_channel *channel)
+{
+	efx_oword_t reg;
+	struct efx_nic *efx = channel->efx;
+
+	/* Remove event queue from card */
+	EFX_ZERO_OWORD(reg);
+	efx_writeo_table(efx, &reg, efx->type->evq_ptr_tbl_base,
+			 channel->channel);
+	if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0)
+		efx_writeo_table(efx, &reg, FR_BZ_TIMER_TBL, channel->channel);
+
+	/* Unpin event queue */
+	efx_fini_special_buffer(efx, &channel->eventq);
+}
+
+/* Free buffers backing event queue */
+void efx_nic_remove_eventq(struct efx_channel *channel)
+{
+	efx_free_special_buffer(channel->efx, &channel->eventq);
+}
+
+
+/* Generates a test event on the event queue.  A subsequent call to
+ * process_eventq() should pick up the event and place the value of
+ * "magic" into channel->eventq_magic;
+ */
+void efx_nic_generate_test_event(struct efx_channel *channel, unsigned int magic)
+{
+	efx_qword_t test_event;
+
+	EFX_POPULATE_QWORD_2(test_event, FSF_AZ_EV_CODE,
+			     FSE_AZ_EV_CODE_DRV_GEN_EV,
+			     FSF_AZ_DRV_GEN_EV_MAGIC, magic);
+	efx_generate_event(channel, &test_event);
+}
+
+/**************************************************************************
+ *
+ * Flush handling
+ *
+ **************************************************************************/
+
+
+static void efx_poll_flush_events(struct efx_nic *efx)
+{
+	struct efx_channel *channel = &efx->channel[0];
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+	unsigned int read_ptr = channel->eventq_read_ptr;
+	unsigned int end_ptr = (read_ptr - 1) & EFX_EVQ_MASK;
+
+	do {
+		efx_qword_t *event = efx_event(channel, read_ptr);
+		int ev_code, ev_sub_code, ev_queue;
+		bool ev_failed;
+
+		if (!efx_event_present(event))
+			break;
+
+		ev_code = EFX_QWORD_FIELD(*event, FSF_AZ_EV_CODE);
+		ev_sub_code = EFX_QWORD_FIELD(*event,
+					      FSF_AZ_DRIVER_EV_SUBCODE);
+		if (ev_code == FSE_AZ_EV_CODE_DRIVER_EV &&
+		    ev_sub_code == FSE_AZ_TX_DESCQ_FLS_DONE_EV) {
+			ev_queue = EFX_QWORD_FIELD(*event,
+						   FSF_AZ_DRIVER_EV_SUBDATA);
+			if (ev_queue < EFX_TX_QUEUE_COUNT) {
+				tx_queue = efx->tx_queue + ev_queue;
+				tx_queue->flushed = FLUSH_DONE;
+			}
+		} else if (ev_code == FSE_AZ_EV_CODE_DRIVER_EV &&
+			   ev_sub_code == FSE_AZ_RX_DESCQ_FLS_DONE_EV) {
+			ev_queue = EFX_QWORD_FIELD(
+				*event, FSF_AZ_DRIVER_EV_RX_DESCQ_ID);
+			ev_failed = EFX_QWORD_FIELD(
+				*event, FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL);
+			if (ev_queue < efx->n_rx_queues) {
+				rx_queue = efx->rx_queue + ev_queue;
+				rx_queue->flushed =
+					ev_failed ? FLUSH_FAILED : FLUSH_DONE;
+			}
+		}
+
+		/* We're about to destroy the queue anyway, so
+		 * it's ok to throw away every non-flush event */
+		EFX_SET_QWORD(*event);
+
+		read_ptr = (read_ptr + 1) & EFX_EVQ_MASK;
+	} while (read_ptr != end_ptr);
+
+	channel->eventq_read_ptr = read_ptr;
+}
+
+/* Handle tx and rx flushes at the same time, since they run in
+ * parallel in the hardware and there's no reason for us to
+ * serialise them */
+int efx_nic_flush_queues(struct efx_nic *efx)
+{
+	struct efx_rx_queue *rx_queue;
+	struct efx_tx_queue *tx_queue;
+	int i, tx_pending, rx_pending;
+
+	/* If necessary prepare the hardware for flushing */
+	efx->type->prepare_flush(efx);
+
+	/* Flush all tx queues in parallel */
+	efx_for_each_tx_queue(tx_queue, efx)
+		efx_flush_tx_queue(tx_queue);
+
+	/* The hardware supports four concurrent rx flushes, each of which may
+	 * need to be retried if there is an outstanding descriptor fetch */
+	for (i = 0; i < EFX_FLUSH_POLL_COUNT; ++i) {
+		rx_pending = tx_pending = 0;
+		efx_for_each_rx_queue(rx_queue, efx) {
+			if (rx_queue->flushed == FLUSH_PENDING)
+				++rx_pending;
+		}
+		efx_for_each_rx_queue(rx_queue, efx) {
+			if (rx_pending == EFX_RX_FLUSH_COUNT)
+				break;
+			if (rx_queue->flushed == FLUSH_FAILED ||
+			    rx_queue->flushed == FLUSH_NONE) {
+				efx_flush_rx_queue(rx_queue);
+				++rx_pending;
+			}
+		}
+		efx_for_each_tx_queue(tx_queue, efx) {
+			if (tx_queue->flushed != FLUSH_DONE)
+				++tx_pending;
+		}
+
+		if (rx_pending == 0 && tx_pending == 0)
+			return 0;
+
+		msleep(EFX_FLUSH_INTERVAL);
+		efx_poll_flush_events(efx);
+	}
+
+	/* Mark the queues as all flushed. We're going to return failure
+	 * leading to a reset, or fake up success anyway */
+	efx_for_each_tx_queue(tx_queue, efx) {
+		if (tx_queue->flushed != FLUSH_DONE)
+			EFX_ERR(efx, "tx queue %d flush command timed out\n",
+				tx_queue->queue);
+		tx_queue->flushed = FLUSH_DONE;
+	}
+	efx_for_each_rx_queue(rx_queue, efx) {
+		if (rx_queue->flushed != FLUSH_DONE)
+			EFX_ERR(efx, "rx queue %d flush command timed out\n",
+				rx_queue->queue);
+		rx_queue->flushed = FLUSH_DONE;
+	}
+
+	if (EFX_WORKAROUND_7803(efx))
+		return 0;
+
+	return -ETIMEDOUT;
+}
+
+/**************************************************************************
+ *
+ * Hardware interrupts
+ * The hardware interrupt handler does very little work; all the event
+ * queue processing is carried out by per-channel tasklets.
+ *
+ **************************************************************************/
+
+/* Enable/disable/generate interrupts */
+static inline void efx_nic_interrupts(struct efx_nic *efx,
+				      bool enabled, bool force)
+{
+	efx_oword_t int_en_reg_ker;
+	unsigned int level = 0;
+
+	if (EFX_WORKAROUND_17213(efx) && !EFX_INT_MODE_USE_MSI(efx))
+		/* Set the level always even if we're generating a test
+		 * interrupt, because our legacy interrupt handler is safe */
+		level = 0x1f;
+
+	EFX_POPULATE_OWORD_3(int_en_reg_ker,
+			     FRF_AZ_KER_INT_LEVE_SEL, level,
+			     FRF_AZ_KER_INT_KER, force,
+			     FRF_AZ_DRV_INT_EN_KER, enabled);
+	efx_writeo(efx, &int_en_reg_ker, FR_AZ_INT_EN_KER);
+}
+
+void efx_nic_enable_interrupts(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+
+	EFX_ZERO_OWORD(*((efx_oword_t *) efx->irq_status.addr));
+	wmb(); /* Ensure interrupt vector is clear before interrupts enabled */
+
+	/* Enable interrupts */
+	efx_nic_interrupts(efx, true, false);
+
+	/* Force processing of all the channels to get the EVQ RPTRs up to
+	   date */
+	efx_for_each_channel(channel, efx)
+		efx_schedule_channel(channel);
+}
+
+void efx_nic_disable_interrupts(struct efx_nic *efx)
+{
+	/* Disable interrupts */
+	efx_nic_interrupts(efx, false, false);
+}
+
+/* Generate a test interrupt
+ * Interrupt must already have been enabled, otherwise nasty things
+ * may happen.
+ */
+void efx_nic_generate_interrupt(struct efx_nic *efx)
+{
+	efx_nic_interrupts(efx, true, true);
+}
+
+/* Process a fatal interrupt
+ * Disable bus mastering ASAP and schedule a reset
+ */
+irqreturn_t efx_nic_fatal_interrupt(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	efx_oword_t *int_ker = efx->irq_status.addr;
+	efx_oword_t fatal_intr;
+	int error, mem_perr;
+
+	efx_reado(efx, &fatal_intr, FR_AZ_FATAL_INTR_KER);
+	error = EFX_OWORD_FIELD(fatal_intr, FRF_AZ_FATAL_INTR);
+
+	EFX_ERR(efx, "SYSTEM ERROR " EFX_OWORD_FMT " status "
+		EFX_OWORD_FMT ": %s\n", EFX_OWORD_VAL(*int_ker),
+		EFX_OWORD_VAL(fatal_intr),
+		error ? "disabling bus mastering" : "no recognised error");
+	if (error == 0)
+		goto out;
+
+	/* If this is a memory parity error dump which blocks are offending */
+	mem_perr = EFX_OWORD_FIELD(fatal_intr, FRF_AZ_MEM_PERR_INT_KER);
+	if (mem_perr) {
+		efx_oword_t reg;
+		efx_reado(efx, &reg, FR_AZ_MEM_STAT);
+		EFX_ERR(efx, "SYSTEM ERROR: memory parity error "
+			EFX_OWORD_FMT "\n", EFX_OWORD_VAL(reg));
+	}
+
+	/* Disable both devices */
+	pci_clear_master(efx->pci_dev);
+	if (efx_nic_is_dual_func(efx))
+		pci_clear_master(nic_data->pci_dev2);
+	efx_nic_disable_interrupts(efx);
+
+	/* Count errors and reset or disable the NIC accordingly */
+	if (efx->int_error_count == 0 ||
+	    time_after(jiffies, efx->int_error_expire)) {
+		efx->int_error_count = 0;
+		efx->int_error_expire =
+			jiffies + EFX_INT_ERROR_EXPIRE * HZ;
+	}
+	if (++efx->int_error_count < EFX_MAX_INT_ERRORS) {
+		EFX_ERR(efx, "SYSTEM ERROR - reset scheduled\n");
+		efx_schedule_reset(efx, RESET_TYPE_INT_ERROR);
+	} else {
+		EFX_ERR(efx, "SYSTEM ERROR - max number of errors seen."
+			"NIC will be disabled\n");
+		efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+/* Handle a legacy interrupt
+ * Acknowledges the interrupt and schedule event queue processing.
+ */
+static irqreturn_t efx_legacy_interrupt(int irq, void *dev_id)
+{
+	struct efx_nic *efx = dev_id;
+	efx_oword_t *int_ker = efx->irq_status.addr;
+	irqreturn_t result = IRQ_NONE;
+	struct efx_channel *channel;
+	efx_dword_t reg;
+	u32 queues;
+	int syserr;
+
+	/* Read the ISR which also ACKs the interrupts */
+	efx_readd(efx, &reg, FR_BZ_INT_ISR0);
+	queues = EFX_EXTRACT_DWORD(reg, 0, 31);
+
+	/* Check to see if we have a serious error condition */
+	syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT);
+	if (unlikely(syserr))
+		return efx_nic_fatal_interrupt(efx);
+
+	if (queues != 0) {
+		if (EFX_WORKAROUND_15783(efx))
+			efx->irq_zero_count = 0;
+
+		/* Schedule processing of any interrupting queues */
+		efx_for_each_channel(channel, efx) {
+			if (queues & 1)
+				efx_schedule_channel(channel);
+			queues >>= 1;
+		}
+		result = IRQ_HANDLED;
+
+	} else if (EFX_WORKAROUND_15783(efx) &&
+		   efx->irq_zero_count++ == 0) {
+		efx_qword_t *event;
+
+		/* Ensure we rearm all event queues */
+		efx_for_each_channel(channel, efx) {
+			event = efx_event(channel, channel->eventq_read_ptr);
+			if (efx_event_present(event))
+				efx_schedule_channel(channel);
+		}
+
+		result = IRQ_HANDLED;
+	}
+
+	if (result == IRQ_HANDLED) {
+		efx->last_irq_cpu = raw_smp_processor_id();
+		EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_DWORD_FMT "\n",
+			  irq, raw_smp_processor_id(), EFX_DWORD_VAL(reg));
+	}
+
+	return result;
+}
+
+/* Handle an MSI interrupt
+ *
+ * Handle an MSI hardware interrupt.  This routine schedules event
+ * queue processing.  No interrupt acknowledgement cycle is necessary.
+ * Also, we never need to check that the interrupt is for us, since
+ * MSI interrupts cannot be shared.
+ */
+static irqreturn_t efx_msi_interrupt(int irq, void *dev_id)
+{
+	struct efx_channel *channel = dev_id;
+	struct efx_nic *efx = channel->efx;
+	efx_oword_t *int_ker = efx->irq_status.addr;
+	int syserr;
+
+	efx->last_irq_cpu = raw_smp_processor_id();
+	EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n",
+		  irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker));
+
+	/* Check to see if we have a serious error condition */
+	syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT);
+	if (unlikely(syserr))
+		return efx_nic_fatal_interrupt(efx);
+
+	/* Schedule processing of the channel */
+	efx_schedule_channel(channel);
+
+	return IRQ_HANDLED;
+}
+
+
+/* Setup RSS indirection table.
+ * This maps from the hash value of the packet to RXQ
+ */
+static void efx_setup_rss_indir_table(struct efx_nic *efx)
+{
+	int i = 0;
+	unsigned long offset;
+	efx_dword_t dword;
+
+	if (efx_nic_rev(efx) < EFX_REV_FALCON_B0)
+		return;
+
+	for (offset = FR_BZ_RX_INDIRECTION_TBL;
+	     offset < FR_BZ_RX_INDIRECTION_TBL + 0x800;
+	     offset += 0x10) {
+		EFX_POPULATE_DWORD_1(dword, FRF_BZ_IT_QUEUE,
+				     i % efx->n_rx_queues);
+		efx_writed(efx, &dword, offset);
+		i++;
+	}
+}
+
+/* Hook interrupt handler(s)
+ * Try MSI and then legacy interrupts.
+ */
+int efx_nic_init_interrupt(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	int rc;
+
+	if (!EFX_INT_MODE_USE_MSI(efx)) {
+		irq_handler_t handler;
+		if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
+			handler = efx_legacy_interrupt;
+		else
+			handler = falcon_legacy_interrupt_a1;
+
+		rc = request_irq(efx->legacy_irq, handler, IRQF_SHARED,
+				 efx->name, efx);
+		if (rc) {
+			EFX_ERR(efx, "failed to hook legacy IRQ %d\n",
+				efx->pci_dev->irq);
+			goto fail1;
+		}
+		return 0;
+	}
+
+	/* Hook MSI or MSI-X interrupt */
+	efx_for_each_channel(channel, efx) {
+		rc = request_irq(channel->irq, efx_msi_interrupt,
+				 IRQF_PROBE_SHARED, /* Not shared */
+				 channel->name, channel);
+		if (rc) {
+			EFX_ERR(efx, "failed to hook IRQ %d\n", channel->irq);
+			goto fail2;
+		}
+	}
+
+	return 0;
+
+ fail2:
+	efx_for_each_channel(channel, efx)
+		free_irq(channel->irq, channel);
+ fail1:
+	return rc;
+}
+
+void efx_nic_fini_interrupt(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	efx_oword_t reg;
+
+	/* Disable MSI/MSI-X interrupts */
+	efx_for_each_channel(channel, efx) {
+		if (channel->irq)
+			free_irq(channel->irq, channel);
+	}
+
+	/* ACK legacy interrupt */
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
+		efx_reado(efx, &reg, FR_BZ_INT_ISR0);
+	else
+		falcon_irq_ack_a1(efx);
+
+	/* Disable legacy interrupt */
+	if (efx->legacy_irq)
+		free_irq(efx->legacy_irq, efx);
+}
+
+u32 efx_nic_fpga_ver(struct efx_nic *efx)
+{
+	efx_oword_t altera_build;
+	efx_reado(efx, &altera_build, FR_AZ_ALTERA_BUILD);
+	return EFX_OWORD_FIELD(altera_build, FRF_AZ_ALTERA_BUILD_VER);
+}
+
+void efx_nic_init_common(struct efx_nic *efx)
+{
+	efx_oword_t temp;
+
+	/* Set positions of descriptor caches in SRAM. */
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_SRM_TX_DC_BASE_ADR,
+			     efx->type->tx_dc_base / 8);
+	efx_writeo(efx, &temp, FR_AZ_SRM_TX_DC_CFG);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_SRM_RX_DC_BASE_ADR,
+			     efx->type->rx_dc_base / 8);
+	efx_writeo(efx, &temp, FR_AZ_SRM_RX_DC_CFG);
+
+	/* Set TX descriptor cache size. */
+	BUILD_BUG_ON(TX_DC_ENTRIES != (8 << TX_DC_ENTRIES_ORDER));
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_TX_DC_SIZE, TX_DC_ENTRIES_ORDER);
+	efx_writeo(efx, &temp, FR_AZ_TX_DC_CFG);
+
+	/* Set RX descriptor cache size.  Set low watermark to size-8, as
+	 * this allows most efficient prefetching.
+	 */
+	BUILD_BUG_ON(RX_DC_ENTRIES != (8 << RX_DC_ENTRIES_ORDER));
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_RX_DC_SIZE, RX_DC_ENTRIES_ORDER);
+	efx_writeo(efx, &temp, FR_AZ_RX_DC_CFG);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_RX_DC_PF_LWM, RX_DC_ENTRIES - 8);
+	efx_writeo(efx, &temp, FR_AZ_RX_DC_PF_WM);
+
+	/* Program INT_KER address */
+	EFX_POPULATE_OWORD_2(temp,
+			     FRF_AZ_NORM_INT_VEC_DIS_KER,
+			     EFX_INT_MODE_USE_MSI(efx),
+			     FRF_AZ_INT_ADR_KER, efx->irq_status.dma_addr);
+	efx_writeo(efx, &temp, FR_AZ_INT_ADR_KER);
+
+	/* Enable all the genuinely fatal interrupts.  (They are still
+	 * masked by the overall interrupt mask, controlled by
+	 * falcon_interrupts()).
+	 *
+	 * Note: All other fatal interrupts are enabled
+	 */
+	EFX_POPULATE_OWORD_3(temp,
+			     FRF_AZ_ILL_ADR_INT_KER_EN, 1,
+			     FRF_AZ_RBUF_OWN_INT_KER_EN, 1,
+			     FRF_AZ_TBUF_OWN_INT_KER_EN, 1);
+	EFX_INVERT_OWORD(temp);
+	efx_writeo(efx, &temp, FR_AZ_FATAL_INTR_KER);
+
+	efx_setup_rss_indir_table(efx);
+
+	/* Disable the ugly timer-based TX DMA backoff and allow TX DMA to be
+	 * controlled by the RX FIFO fill level. Set arbitration to one pkt/Q.
+	 */
+	efx_reado(efx, &temp, FR_AZ_TX_RESERVED);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_RX_SPACER, 0xfe);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_RX_SPACER_EN, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_ONE_PKT_PER_Q, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PUSH_EN, 0);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_DIS_NON_IP_EV, 1);
+	/* Enable SW_EV to inherit in char driver - assume harmless here */
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1);
+	/* Prefetch threshold 2 => fetch when descriptor cache half empty */
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2);
+	/* Squash TX of packets of 16 bytes or less */
+	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0)
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
+	efx_writeo(efx, &temp, FR_AZ_TX_RESERVED);
+}
diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h
new file mode 100644
index 0000000..9351c03
--- /dev/null
+++ b/drivers/net/sfc/nic.h
@@ -0,0 +1,261 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_NIC_H
+#define EFX_NIC_H
+
+#include <linux/i2c-algo-bit.h>
+#include "net_driver.h"
+#include "efx.h"
+#include "mcdi.h"
+
+/*
+ * Falcon hardware control
+ */
+
+enum {
+	EFX_REV_FALCON_A0 = 0,
+	EFX_REV_FALCON_A1 = 1,
+	EFX_REV_FALCON_B0 = 2,
+	EFX_REV_SIENA_A0 = 3,
+};
+
+static inline int efx_nic_rev(struct efx_nic *efx)
+{
+	return efx->type->revision;
+}
+
+extern u32 efx_nic_fpga_ver(struct efx_nic *efx);
+
+static inline bool efx_nic_has_mc(struct efx_nic *efx)
+{
+	return efx_nic_rev(efx) >= EFX_REV_SIENA_A0;
+}
+/* NIC has two interlinked PCI functions for the same port. */
+static inline bool efx_nic_is_dual_func(struct efx_nic *efx)
+{
+	return efx_nic_rev(efx) < EFX_REV_FALCON_B0;
+}
+
+enum {
+	PHY_TYPE_NONE = 0,
+	PHY_TYPE_TXC43128 = 1,
+	PHY_TYPE_88E1111 = 2,
+	PHY_TYPE_SFX7101 = 3,
+	PHY_TYPE_QT2022C2 = 4,
+	PHY_TYPE_PM8358 = 6,
+	PHY_TYPE_SFT9001A = 8,
+	PHY_TYPE_QT2025C = 9,
+	PHY_TYPE_SFT9001B = 10,
+};
+
+#define FALCON_XMAC_LOOPBACKS			\
+	((1 << LOOPBACK_XGMII) |		\
+	 (1 << LOOPBACK_XGXS) |			\
+	 (1 << LOOPBACK_XAUI))
+
+#define FALCON_GMAC_LOOPBACKS			\
+	(1 << LOOPBACK_GMAC)
+
+/**
+ * struct falcon_board_type - board operations and type information
+ * @id: Board type id, as found in NVRAM
+ * @ref_model: Model number of Solarflare reference design
+ * @gen_type: Generic board type description
+ * @init: Allocate resources and initialise peripheral hardware
+ * @init_phy: Do board-specific PHY initialisation
+ * @fini: Shut down hardware and free resources
+ * @set_id_led: Set state of identifying LED or revert to automatic function
+ * @monitor: Board-specific health check function
+ */
+struct falcon_board_type {
+	u8 id;
+	const char *ref_model;
+	const char *gen_type;
+	int (*init) (struct efx_nic *nic);
+	void (*init_phy) (struct efx_nic *efx);
+	void (*fini) (struct efx_nic *nic);
+	void (*set_id_led) (struct efx_nic *efx, enum efx_led_mode mode);
+	int (*monitor) (struct efx_nic *nic);
+};
+
+/**
+ * struct falcon_board - board information
+ * @type: Type of board
+ * @major: Major rev. ('A', 'B' ...)
+ * @minor: Minor rev. (0, 1, ...)
+ * @i2c_adap: I2C adapter for on-board peripherals
+ * @i2c_data: Data for bit-banging algorithm
+ * @hwmon_client: I2C client for hardware monitor
+ * @ioexp_client: I2C client for power/port control
+ */
+struct falcon_board {
+	const struct falcon_board_type *type;
+	int major;
+	int minor;
+	struct i2c_adapter i2c_adap;
+	struct i2c_algo_bit_data i2c_data;
+	struct i2c_client *hwmon_client, *ioexp_client;
+};
+
+/**
+ * struct falcon_nic_data - Falcon NIC state
+ * @pci_dev2: Secondary function of Falcon A
+ * @board: Board state and functions
+ * @stats_disable_count: Nest count for disabling statistics fetches
+ * @stats_pending: Is there a pending DMA of MAC statistics.
+ * @stats_timer: A timer for regularly fetching MAC statistics.
+ * @stats_dma_done: Pointer to the flag which indicates DMA completion.
+ */
+struct falcon_nic_data {
+	struct pci_dev *pci_dev2;
+	struct falcon_board board;
+	unsigned int stats_disable_count;
+	bool stats_pending;
+	struct timer_list stats_timer;
+	u32 *stats_dma_done;
+};
+
+static inline struct falcon_board *falcon_board(struct efx_nic *efx)
+{
+	struct falcon_nic_data *data = efx->nic_data;
+	return &data->board;
+}
+
+/**
+ * struct siena_nic_data - Siena NIC state
+ * @fw_version: Management controller firmware version
+ * @fw_build: Firmware build number
+ * @mcdi: Management-Controller-to-Driver Interface
+ * @wol_filter_id: Wake-on-LAN packet filter id
+ */
+struct siena_nic_data {
+	u64 fw_version;
+	u32 fw_build;
+	struct efx_mcdi_iface mcdi;
+	int wol_filter_id;
+};
+
+extern void siena_print_fwver(struct efx_nic *efx, char *buf, size_t len);
+
+extern struct efx_nic_type falcon_a1_nic_type;
+extern struct efx_nic_type falcon_b0_nic_type;
+extern struct efx_nic_type siena_a0_nic_type;
+
+/**************************************************************************
+ *
+ * Externs
+ *
+ **************************************************************************
+ */
+
+extern void falcon_probe_board(struct efx_nic *efx, u16 revision_info);
+
+/* TX data path */
+extern int efx_nic_probe_tx(struct efx_tx_queue *tx_queue);
+extern void efx_nic_init_tx(struct efx_tx_queue *tx_queue);
+extern void efx_nic_fini_tx(struct efx_tx_queue *tx_queue);
+extern void efx_nic_remove_tx(struct efx_tx_queue *tx_queue);
+extern void efx_nic_push_buffers(struct efx_tx_queue *tx_queue);
+
+/* RX data path */
+extern int efx_nic_probe_rx(struct efx_rx_queue *rx_queue);
+extern void efx_nic_init_rx(struct efx_rx_queue *rx_queue);
+extern void efx_nic_fini_rx(struct efx_rx_queue *rx_queue);
+extern void efx_nic_remove_rx(struct efx_rx_queue *rx_queue);
+extern void efx_nic_notify_rx_desc(struct efx_rx_queue *rx_queue);
+
+/* Event data path */
+extern int efx_nic_probe_eventq(struct efx_channel *channel);
+extern void efx_nic_init_eventq(struct efx_channel *channel);
+extern void efx_nic_fini_eventq(struct efx_channel *channel);
+extern void efx_nic_remove_eventq(struct efx_channel *channel);
+extern int efx_nic_process_eventq(struct efx_channel *channel, int rx_quota);
+extern void efx_nic_eventq_read_ack(struct efx_channel *channel);
+
+/* MAC/PHY */
+extern void falcon_drain_tx_fifo(struct efx_nic *efx);
+extern void falcon_reconfigure_mac_wrapper(struct efx_nic *efx);
+extern int efx_nic_rx_xoff_thresh, efx_nic_rx_xon_thresh;
+
+/* Interrupts and test events */
+extern int efx_nic_init_interrupt(struct efx_nic *efx);
+extern void efx_nic_enable_interrupts(struct efx_nic *efx);
+extern void efx_nic_generate_test_event(struct efx_channel *channel,
+					unsigned int magic);
+extern void efx_nic_generate_interrupt(struct efx_nic *efx);
+extern void efx_nic_disable_interrupts(struct efx_nic *efx);
+extern void efx_nic_fini_interrupt(struct efx_nic *efx);
+extern irqreturn_t efx_nic_fatal_interrupt(struct efx_nic *efx);
+extern irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id);
+extern void falcon_irq_ack_a1(struct efx_nic *efx);
+
+#define EFX_IRQ_MOD_RESOLUTION 5
+
+/* Global Resources */
+extern int efx_nic_flush_queues(struct efx_nic *efx);
+extern void falcon_start_nic_stats(struct efx_nic *efx);
+extern void falcon_stop_nic_stats(struct efx_nic *efx);
+extern int falcon_reset_xaui(struct efx_nic *efx);
+extern void efx_nic_init_common(struct efx_nic *efx);
+
+int efx_nic_alloc_buffer(struct efx_nic *efx, struct efx_buffer *buffer,
+			 unsigned int len);
+void efx_nic_free_buffer(struct efx_nic *efx, struct efx_buffer *buffer);
+
+/* Tests */
+struct efx_nic_register_test {
+	unsigned address;
+	efx_oword_t mask;
+};
+extern int efx_nic_test_registers(struct efx_nic *efx,
+				  const struct efx_nic_register_test *regs,
+				  size_t n_regs);
+
+/**************************************************************************
+ *
+ * Falcon MAC stats
+ *
+ **************************************************************************
+ */
+
+#define FALCON_STAT_OFFSET(falcon_stat) EFX_VAL(falcon_stat, offset)
+#define FALCON_STAT_WIDTH(falcon_stat) EFX_VAL(falcon_stat, WIDTH)
+
+/* Retrieve statistic from statistics block */
+#define FALCON_STAT(efx, falcon_stat, efx_stat) do {		\
+	if (FALCON_STAT_WIDTH(falcon_stat) == 16)		\
+		(efx)->mac_stats.efx_stat += le16_to_cpu(	\
+			*((__force __le16 *)				\
+			  (efx->stats_buffer.addr +		\
+			   FALCON_STAT_OFFSET(falcon_stat))));	\
+	else if (FALCON_STAT_WIDTH(falcon_stat) == 32)		\
+		(efx)->mac_stats.efx_stat += le32_to_cpu(	\
+			*((__force __le32 *)				\
+			  (efx->stats_buffer.addr +		\
+			   FALCON_STAT_OFFSET(falcon_stat))));	\
+	else							\
+		(efx)->mac_stats.efx_stat += le64_to_cpu(	\
+			*((__force __le64 *)				\
+			  (efx->stats_buffer.addr +		\
+			   FALCON_STAT_OFFSET(falcon_stat))));	\
+	} while (0)
+
+#define FALCON_MAC_STATS_SIZE 0x100
+
+#define MAC_DATA_LBN 0
+#define MAC_DATA_WIDTH 32
+
+extern void efx_nic_generate_event(struct efx_channel *channel,
+				   efx_qword_t *event);
+
+extern void falcon_poll_xmac(struct efx_nic *efx);
+
+#endif /* EFX_NIC_H */
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index c1cff9c..5bc2613 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -1,6 +1,6 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
+ * Copyright 2007-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -16,16 +16,16 @@
 extern struct efx_phy_operations falcon_sfx7101_phy_ops;
 extern struct efx_phy_operations falcon_sft9001_phy_ops;
 
-extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
+extern void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode);
 
 /* Wait for the PHY to boot. Return 0 on success, -EINVAL if the PHY failed
  * to boot due to corrupt flash, or some other negative error code. */
 extern int sft9001_wait_boot(struct efx_nic *efx);
 
 /****************************************************************************
- * AMCC/Quake QT20xx PHYs
+ * AMCC/Quake QT202x PHYs
  */
-extern struct efx_phy_operations falcon_xfp_phy_ops;
+extern struct efx_phy_operations falcon_qt202x_phy_ops;
 
 /* These PHYs provide various H/W control states for LEDs */
 #define QUAKE_LED_LINK_INVAL	(0)
@@ -39,6 +39,23 @@
 #define QUAKE_LED_TXLINK	(0)
 #define QUAKE_LED_RXLINK	(8)
 
-extern void xfp_set_led(struct efx_nic *p, int led, int state);
+extern void falcon_qt202x_set_led(struct efx_nic *p, int led, int state);
+
+/****************************************************************************
+ * Siena managed PHYs
+ */
+extern struct efx_phy_operations efx_mcdi_phy_ops;
+
+extern int efx_mcdi_mdio_read(struct efx_nic *efx, unsigned int bus,
+			      unsigned int prtad, unsigned int devad,
+			      u16 addr, u16 *value_out, u32 *status_out);
+extern int efx_mcdi_mdio_write(struct efx_nic *efx, unsigned int bus,
+			       unsigned int prtad, unsigned int devad,
+			       u16 addr, u16 value, u32 *status_out);
+extern void efx_mcdi_phy_decode_link(struct efx_nic *efx,
+				     struct efx_link_state *link_state,
+				     u32 speed, u32 flags, u32 fcntl);
+extern int efx_mcdi_phy_reconfigure(struct efx_nic *efx);
+extern void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa);
 
 #endif
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
new file mode 100644
index 0000000..3800fc7
--- /dev/null
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -0,0 +1,242 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+/*
+ * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
+ */
+
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include "efx.h"
+#include "mdio_10g.h"
+#include "phy.h"
+#include "nic.h"
+
+#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS |		\
+			      MDIO_DEVS_PMAPMD |	\
+			      MDIO_DEVS_PHYXS)
+
+#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
+			  (1 << LOOPBACK_PMAPMD) |	\
+			  (1 << LOOPBACK_PHYXS_WS))
+
+/****************************************************************************/
+/* Quake-specific MDIO registers */
+#define MDIO_QUAKE_LED0_REG	(0xD006)
+
+/* QT2025C only */
+#define PCS_FW_HEARTBEAT_REG	0xd7ee
+#define PCS_FW_HEARTB_LBN	0
+#define PCS_FW_HEARTB_WIDTH	8
+#define PCS_UC8051_STATUS_REG	0xd7fd
+#define PCS_UC_STATUS_LBN	0
+#define PCS_UC_STATUS_WIDTH	8
+#define PCS_UC_STATUS_FW_SAVE	0x20
+#define PMA_PMD_FTX_CTRL2_REG	0xc309
+#define PMA_PMD_FTX_STATIC_LBN	13
+#define PMA_PMD_VEND1_REG	0xc001
+#define PMA_PMD_VEND1_LBTXD_LBN	15
+#define PCS_VEND1_REG	   	0xc000
+#define PCS_VEND1_LBTXD_LBN	5
+
+void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
+{
+	int addr = MDIO_QUAKE_LED0_REG + led;
+	efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
+}
+
+struct qt202x_phy_data {
+	enum efx_phy_mode phy_mode;
+};
+
+#define QT2022C2_MAX_RESET_TIME 500
+#define QT2022C2_RESET_WAIT 10
+
+static int qt2025c_wait_reset(struct efx_nic *efx)
+{
+	unsigned long timeout = jiffies + 10 * HZ;
+	int reg, old_counter = 0;
+
+	/* Wait for firmware heartbeat to start */
+	for (;;) {
+		int counter;
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
+		if (reg < 0)
+			return reg;
+		counter = ((reg >> PCS_FW_HEARTB_LBN) &
+			    ((1 << PCS_FW_HEARTB_WIDTH) - 1));
+		if (old_counter == 0)
+			old_counter = counter;
+		else if (counter != old_counter)
+			break;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		msleep(10);
+	}
+
+	/* Wait for firmware status to look good */
+	for (;;) {
+		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
+		if (reg < 0)
+			return reg;
+		if ((reg &
+		     ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
+		    PCS_UC_STATUS_FW_SAVE)
+			break;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		msleep(100);
+	}
+
+	return 0;
+}
+
+static int qt202x_reset_phy(struct efx_nic *efx)
+{
+	int rc;
+
+	if (efx->phy_type == PHY_TYPE_QT2025C) {
+		/* Wait for the reset triggered by falcon_reset_hw()
+		 * to complete */
+		rc = qt2025c_wait_reset(efx);
+		if (rc < 0)
+			goto fail;
+	} else {
+		/* Reset the PHYXS MMD. This is documented as doing
+		 * a complete soft reset. */
+		rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
+					QT2022C2_MAX_RESET_TIME /
+					QT2022C2_RESET_WAIT,
+					QT2022C2_RESET_WAIT);
+		if (rc < 0)
+			goto fail;
+	}
+
+	/* Wait 250ms for the PHY to complete bootup */
+	msleep(250);
+
+	/* Check that all the MMDs we expect are present and responding. We
+	 * expect faults on some if the link is down, but not on the PHY XS */
+	rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
+	if (rc < 0)
+		goto fail;
+
+	falcon_board(efx)->type->init_phy(efx);
+
+	return rc;
+
+ fail:
+	EFX_ERR(efx, "PHY reset timed out\n");
+	return rc;
+}
+
+static int qt202x_phy_probe(struct efx_nic *efx)
+{
+	efx->mdio.mmds = QT202X_REQUIRED_DEVS;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->loopback_modes = QT202X_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+	return 0;
+}
+
+static int qt202x_phy_init(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data;
+	u32 devid;
+	int rc;
+
+	rc = qt202x_reset_phy(efx);
+	if (rc) {
+		EFX_ERR(efx, "PHY init failed\n");
+		return rc;
+	}
+
+	phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+	efx->phy_data = phy_data;
+
+	devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
+	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
+		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
+		 efx_mdio_id_rev(devid));
+
+	phy_data->phy_mode = efx->phy_mode;
+	return 0;
+}
+
+static int qt202x_link_ok(struct efx_nic *efx)
+{
+	return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
+}
+
+static bool qt202x_phy_poll(struct efx_nic *efx)
+{
+	bool was_up = efx->link_state.up;
+
+	efx->link_state.up = qt202x_link_ok(efx);
+	efx->link_state.speed = 10000;
+	efx->link_state.fd = true;
+	efx->link_state.fc = efx->wanted_fc;
+
+	return efx->link_state.up != was_up;
+}
+
+static int qt202x_phy_reconfigure(struct efx_nic *efx)
+{
+	struct qt202x_phy_data *phy_data = efx->phy_data;
+
+	if (efx->phy_type == PHY_TYPE_QT2025C) {
+		/* There are several different register bits which can
+		 * disable TX (and save power) on direct-attach cables
+		 * or optical transceivers, varying somewhat between
+		 * firmware versions.  Only 'static mode' appears to
+		 * cover everything. */
+		mdio_set_flag(
+			&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
+			PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
+			efx->phy_mode & PHY_MODE_TX_DISABLED ||
+			efx->phy_mode & PHY_MODE_LOW_POWER ||
+			efx->loopback_mode == LOOPBACK_PCS ||
+			efx->loopback_mode == LOOPBACK_PMAPMD);
+	} else {
+		/* Reset the PHY when moving from tx off to tx on */
+		if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
+		    (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
+			qt202x_reset_phy(efx);
+
+		efx_mdio_transmit_disable(efx);
+	}
+
+	efx_mdio_phy_reconfigure(efx);
+
+	phy_data->phy_mode = efx->phy_mode;
+
+	return 0;
+}
+
+static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	mdio45_ethtool_gset(&efx->mdio, ecmd);
+}
+
+static void qt202x_phy_fini(struct efx_nic *efx)
+{
+	/* Free the context block */
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+}
+
+struct efx_phy_operations falcon_qt202x_phy_ops = {
+	.probe		 = qt202x_phy_probe,
+	.init		 = qt202x_phy_init,
+	.reconfigure	 = qt202x_phy_reconfigure,
+	.poll	     	 = qt202x_phy_poll,
+	.fini	  	 = qt202x_phy_fini,
+	.get_settings	 = qt202x_phy_get_settings,
+	.set_settings	 = efx_mdio_set_settings,
+};
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
new file mode 100644
index 0000000..89d606f
--- /dev/null
+++ b/drivers/net/sfc/regs.h
@@ -0,0 +1,3168 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_REGS_H
+#define EFX_REGS_H
+
+/*
+ * Falcon hardware architecture definitions have a name prefix following
+ * the format:
+ *
+ *     F<type>_<min-rev><max-rev>_
+ *
+ * The following <type> strings are used:
+ *
+ *             MMIO register  MC register  Host memory structure
+ * -------------------------------------------------------------
+ * Address     R              MCR
+ * Bitfield    RF             MCRF         SF
+ * Enumerator  FE             MCFE         SE
+ *
+ * <min-rev> is the first revision to which the definition applies:
+ *
+ *     A: Falcon A1 (SFC4000AB)
+ *     B: Falcon B0 (SFC4000BA)
+ *     C: Siena A0 (SFL9021AA)
+ *
+ * If the definition has been changed or removed in later revisions
+ * then <max-rev> is the last revision to which the definition applies;
+ * otherwise it is "Z".
+ */
+
+/**************************************************************************
+ *
+ * Falcon/Siena registers and descriptors
+ *
+ **************************************************************************
+ */
+
+/* ADR_REGION_REG: Address region register */
+#define	FR_AZ_ADR_REGION 0x00000000
+#define	FRF_AZ_ADR_REGION3_LBN 96
+#define	FRF_AZ_ADR_REGION3_WIDTH 18
+#define	FRF_AZ_ADR_REGION2_LBN 64
+#define	FRF_AZ_ADR_REGION2_WIDTH 18
+#define	FRF_AZ_ADR_REGION1_LBN 32
+#define	FRF_AZ_ADR_REGION1_WIDTH 18
+#define	FRF_AZ_ADR_REGION0_LBN 0
+#define	FRF_AZ_ADR_REGION0_WIDTH 18
+
+/* INT_EN_REG_KER: Kernel driver Interrupt enable register */
+#define	FR_AZ_INT_EN_KER 0x00000010
+#define	FRF_AZ_KER_INT_LEVE_SEL_LBN 8
+#define	FRF_AZ_KER_INT_LEVE_SEL_WIDTH 6
+#define	FRF_AZ_KER_INT_CHAR_LBN 4
+#define	FRF_AZ_KER_INT_CHAR_WIDTH 1
+#define	FRF_AZ_KER_INT_KER_LBN 3
+#define	FRF_AZ_KER_INT_KER_WIDTH 1
+#define	FRF_AZ_DRV_INT_EN_KER_LBN 0
+#define	FRF_AZ_DRV_INT_EN_KER_WIDTH 1
+
+/* INT_EN_REG_CHAR: Char Driver interrupt enable register */
+#define	FR_BZ_INT_EN_CHAR 0x00000020
+#define	FRF_BZ_CHAR_INT_LEVE_SEL_LBN 8
+#define	FRF_BZ_CHAR_INT_LEVE_SEL_WIDTH 6
+#define	FRF_BZ_CHAR_INT_CHAR_LBN 4
+#define	FRF_BZ_CHAR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_CHAR_INT_KER_LBN 3
+#define	FRF_BZ_CHAR_INT_KER_WIDTH 1
+#define	FRF_BZ_DRV_INT_EN_CHAR_LBN 0
+#define	FRF_BZ_DRV_INT_EN_CHAR_WIDTH 1
+
+/* INT_ADR_REG_KER: Interrupt host address for Kernel driver */
+#define	FR_AZ_INT_ADR_KER 0x00000030
+#define	FRF_AZ_NORM_INT_VEC_DIS_KER_LBN 64
+#define	FRF_AZ_NORM_INT_VEC_DIS_KER_WIDTH 1
+#define	FRF_AZ_INT_ADR_KER_LBN 0
+#define	FRF_AZ_INT_ADR_KER_WIDTH 64
+
+/* INT_ADR_REG_CHAR: Interrupt host address for Char driver */
+#define	FR_BZ_INT_ADR_CHAR 0x00000040
+#define	FRF_BZ_NORM_INT_VEC_DIS_CHAR_LBN 64
+#define	FRF_BZ_NORM_INT_VEC_DIS_CHAR_WIDTH 1
+#define	FRF_BZ_INT_ADR_CHAR_LBN 0
+#define	FRF_BZ_INT_ADR_CHAR_WIDTH 64
+
+/* INT_ACK_KER: Kernel interrupt acknowledge register */
+#define	FR_AA_INT_ACK_KER 0x00000050
+#define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
+#define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
+
+/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+#define	FR_BZ_INT_ISR0 0x00000090
+#define	FRF_BZ_INT_ISR_REG_LBN 0
+#define	FRF_BZ_INT_ISR_REG_WIDTH 64
+
+/* HW_INIT_REG: Hardware initialization register */
+#define	FR_AZ_HW_INIT 0x000000c0
+#define	FRF_BB_BDMRD_CPLF_FULL_LBN 124
+#define	FRF_BB_BDMRD_CPLF_FULL_WIDTH 1
+#define	FRF_BB_PCIE_CPL_TIMEOUT_CTRL_LBN 121
+#define	FRF_BB_PCIE_CPL_TIMEOUT_CTRL_WIDTH 3
+#define	FRF_CZ_TX_MRG_TAGS_LBN 120
+#define	FRF_CZ_TX_MRG_TAGS_WIDTH 1
+#define	FRF_AB_TRGT_MASK_ALL_LBN 100
+#define	FRF_AB_TRGT_MASK_ALL_WIDTH 1
+#define	FRF_AZ_DOORBELL_DROP_LBN 92
+#define	FRF_AZ_DOORBELL_DROP_WIDTH 8
+#define	FRF_AB_TX_RREQ_MASK_EN_LBN 76
+#define	FRF_AB_TX_RREQ_MASK_EN_WIDTH 1
+#define	FRF_AB_PE_EIDLE_DIS_LBN 75
+#define	FRF_AB_PE_EIDLE_DIS_WIDTH 1
+#define	FRF_AA_FC_BLOCKING_EN_LBN 45
+#define	FRF_AA_FC_BLOCKING_EN_WIDTH 1
+#define	FRF_BZ_B2B_REQ_EN_LBN 45
+#define	FRF_BZ_B2B_REQ_EN_WIDTH 1
+#define	FRF_AA_B2B_REQ_EN_LBN 44
+#define	FRF_AA_B2B_REQ_EN_WIDTH 1
+#define	FRF_BB_FC_BLOCKING_EN_LBN 44
+#define	FRF_BB_FC_BLOCKING_EN_WIDTH 1
+#define	FRF_AZ_POST_WR_MASK_LBN 40
+#define	FRF_AZ_POST_WR_MASK_WIDTH 4
+#define	FRF_AZ_TLP_TC_LBN 34
+#define	FRF_AZ_TLP_TC_WIDTH 3
+#define	FRF_AZ_TLP_ATTR_LBN 32
+#define	FRF_AZ_TLP_ATTR_WIDTH 2
+#define	FRF_AB_INTB_VEC_LBN 24
+#define	FRF_AB_INTB_VEC_WIDTH 5
+#define	FRF_AB_INTA_VEC_LBN 16
+#define	FRF_AB_INTA_VEC_WIDTH 5
+#define	FRF_AZ_WD_TIMER_LBN 8
+#define	FRF_AZ_WD_TIMER_WIDTH 8
+#define	FRF_AZ_US_DISABLE_LBN 5
+#define	FRF_AZ_US_DISABLE_WIDTH 1
+#define	FRF_AZ_TLP_EP_LBN 4
+#define	FRF_AZ_TLP_EP_WIDTH 1
+#define	FRF_AZ_ATTR_SEL_LBN 3
+#define	FRF_AZ_ATTR_SEL_WIDTH 1
+#define	FRF_AZ_TD_SEL_LBN 1
+#define	FRF_AZ_TD_SEL_WIDTH 1
+#define	FRF_AZ_TLP_TD_LBN 0
+#define	FRF_AZ_TLP_TD_WIDTH 1
+
+/* EE_SPI_HCMD_REG: SPI host command register */
+#define	FR_AB_EE_SPI_HCMD 0x00000100
+#define	FRF_AB_EE_SPI_HCMD_CMD_EN_LBN 31
+#define	FRF_AB_EE_SPI_HCMD_CMD_EN_WIDTH 1
+#define	FRF_AB_EE_WR_TIMER_ACTIVE_LBN 28
+#define	FRF_AB_EE_WR_TIMER_ACTIVE_WIDTH 1
+#define	FRF_AB_EE_SPI_HCMD_SF_SEL_LBN 24
+#define	FRF_AB_EE_SPI_HCMD_SF_SEL_WIDTH 1
+#define	FRF_AB_EE_SPI_HCMD_DABCNT_LBN 16
+#define	FRF_AB_EE_SPI_HCMD_DABCNT_WIDTH 5
+#define	FRF_AB_EE_SPI_HCMD_READ_LBN 15
+#define	FRF_AB_EE_SPI_HCMD_READ_WIDTH 1
+#define	FRF_AB_EE_SPI_HCMD_DUBCNT_LBN 12
+#define	FRF_AB_EE_SPI_HCMD_DUBCNT_WIDTH 2
+#define	FRF_AB_EE_SPI_HCMD_ADBCNT_LBN 8
+#define	FRF_AB_EE_SPI_HCMD_ADBCNT_WIDTH 2
+#define	FRF_AB_EE_SPI_HCMD_ENC_LBN 0
+#define	FRF_AB_EE_SPI_HCMD_ENC_WIDTH 8
+
+/* USR_EV_CFG: User Level Event Configuration register */
+#define	FR_CZ_USR_EV_CFG 0x00000100
+#define	FRF_CZ_USREV_DIS_LBN 16
+#define	FRF_CZ_USREV_DIS_WIDTH 1
+#define	FRF_CZ_DFLT_EVQ_LBN 0
+#define	FRF_CZ_DFLT_EVQ_WIDTH 10
+
+/* EE_SPI_HADR_REG: SPI host address register */
+#define	FR_AB_EE_SPI_HADR 0x00000110
+#define	FRF_AB_EE_SPI_HADR_DUBYTE_LBN 24
+#define	FRF_AB_EE_SPI_HADR_DUBYTE_WIDTH 8
+#define	FRF_AB_EE_SPI_HADR_ADR_LBN 0
+#define	FRF_AB_EE_SPI_HADR_ADR_WIDTH 24
+
+/* EE_SPI_HDATA_REG: SPI host data register */
+#define	FR_AB_EE_SPI_HDATA 0x00000120
+#define	FRF_AB_EE_SPI_HDATA3_LBN 96
+#define	FRF_AB_EE_SPI_HDATA3_WIDTH 32
+#define	FRF_AB_EE_SPI_HDATA2_LBN 64
+#define	FRF_AB_EE_SPI_HDATA2_WIDTH 32
+#define	FRF_AB_EE_SPI_HDATA1_LBN 32
+#define	FRF_AB_EE_SPI_HDATA1_WIDTH 32
+#define	FRF_AB_EE_SPI_HDATA0_LBN 0
+#define	FRF_AB_EE_SPI_HDATA0_WIDTH 32
+
+/* EE_BASE_PAGE_REG: Expansion ROM base mirror register */
+#define	FR_AB_EE_BASE_PAGE 0x00000130
+#define	FRF_AB_EE_EXPROM_MASK_LBN 16
+#define	FRF_AB_EE_EXPROM_MASK_WIDTH 13
+#define	FRF_AB_EE_EXP_ROM_WINDOW_BASE_LBN 0
+#define	FRF_AB_EE_EXP_ROM_WINDOW_BASE_WIDTH 13
+
+/* EE_VPD_CFG0_REG: SPI/VPD configuration register 0 */
+#define	FR_AB_EE_VPD_CFG0 0x00000140
+#define	FRF_AB_EE_SF_FASTRD_EN_LBN 127
+#define	FRF_AB_EE_SF_FASTRD_EN_WIDTH 1
+#define	FRF_AB_EE_SF_CLOCK_DIV_LBN 120
+#define	FRF_AB_EE_SF_CLOCK_DIV_WIDTH 7
+#define	FRF_AB_EE_VPD_WIP_POLL_LBN 119
+#define	FRF_AB_EE_VPD_WIP_POLL_WIDTH 1
+#define	FRF_AB_EE_EE_CLOCK_DIV_LBN 112
+#define	FRF_AB_EE_EE_CLOCK_DIV_WIDTH 7
+#define	FRF_AB_EE_EE_WR_TMR_VALUE_LBN 96
+#define	FRF_AB_EE_EE_WR_TMR_VALUE_WIDTH 16
+#define	FRF_AB_EE_VPDW_LENGTH_LBN 80
+#define	FRF_AB_EE_VPDW_LENGTH_WIDTH 15
+#define	FRF_AB_EE_VPDW_BASE_LBN 64
+#define	FRF_AB_EE_VPDW_BASE_WIDTH 15
+#define	FRF_AB_EE_VPD_WR_CMD_EN_LBN 56
+#define	FRF_AB_EE_VPD_WR_CMD_EN_WIDTH 8
+#define	FRF_AB_EE_VPD_BASE_LBN 32
+#define	FRF_AB_EE_VPD_BASE_WIDTH 24
+#define	FRF_AB_EE_VPD_LENGTH_LBN 16
+#define	FRF_AB_EE_VPD_LENGTH_WIDTH 15
+#define	FRF_AB_EE_VPD_AD_SIZE_LBN 8
+#define	FRF_AB_EE_VPD_AD_SIZE_WIDTH 5
+#define	FRF_AB_EE_VPD_ACCESS_ON_LBN 5
+#define	FRF_AB_EE_VPD_ACCESS_ON_WIDTH 1
+#define	FRF_AB_EE_VPD_ACCESS_BLOCK_LBN 4
+#define	FRF_AB_EE_VPD_ACCESS_BLOCK_WIDTH 1
+#define	FRF_AB_EE_VPD_DEV_SF_SEL_LBN 2
+#define	FRF_AB_EE_VPD_DEV_SF_SEL_WIDTH 1
+#define	FRF_AB_EE_VPD_EN_AD9_MODE_LBN 1
+#define	FRF_AB_EE_VPD_EN_AD9_MODE_WIDTH 1
+#define	FRF_AB_EE_VPD_EN_LBN 0
+#define	FRF_AB_EE_VPD_EN_WIDTH 1
+
+/* EE_VPD_SW_CNTL_REG: VPD access SW control register */
+#define	FR_AB_EE_VPD_SW_CNTL 0x00000150
+#define	FRF_AB_EE_VPD_CYCLE_PENDING_LBN 31
+#define	FRF_AB_EE_VPD_CYCLE_PENDING_WIDTH 1
+#define	FRF_AB_EE_VPD_CYC_WRITE_LBN 28
+#define	FRF_AB_EE_VPD_CYC_WRITE_WIDTH 1
+#define	FRF_AB_EE_VPD_CYC_ADR_LBN 0
+#define	FRF_AB_EE_VPD_CYC_ADR_WIDTH 15
+
+/* EE_VPD_SW_DATA_REG: VPD access SW data register */
+#define	FR_AB_EE_VPD_SW_DATA 0x00000160
+#define	FRF_AB_EE_VPD_CYC_DAT_LBN 0
+#define	FRF_AB_EE_VPD_CYC_DAT_WIDTH 32
+
+/* PBMX_DBG_IADDR_REG: Capture Module address register */
+#define	FR_CZ_PBMX_DBG_IADDR 0x000001f0
+#define	FRF_CZ_PBMX_DBG_IADDR_LBN 0
+#define	FRF_CZ_PBMX_DBG_IADDR_WIDTH 32
+
+/* PCIE_CORE_INDIRECT_REG: Indirect Access to PCIE Core registers */
+#define	FR_BB_PCIE_CORE_INDIRECT 0x000001f0
+#define	FRF_BB_PCIE_CORE_TARGET_DATA_LBN 32
+#define	FRF_BB_PCIE_CORE_TARGET_DATA_WIDTH 32
+#define	FRF_BB_PCIE_CORE_INDIRECT_ACCESS_DIR_LBN 15
+#define	FRF_BB_PCIE_CORE_INDIRECT_ACCESS_DIR_WIDTH 1
+#define	FRF_BB_PCIE_CORE_TARGET_REG_ADRS_LBN 0
+#define	FRF_BB_PCIE_CORE_TARGET_REG_ADRS_WIDTH 12
+
+/* PBMX_DBG_IDATA_REG: Capture Module data register */
+#define	FR_CZ_PBMX_DBG_IDATA 0x000001f8
+#define	FRF_CZ_PBMX_DBG_IDATA_LBN 0
+#define	FRF_CZ_PBMX_DBG_IDATA_WIDTH 64
+
+/* NIC_STAT_REG: NIC status register */
+#define	FR_AB_NIC_STAT 0x00000200
+#define	FRF_BB_AER_DIS_LBN 34
+#define	FRF_BB_AER_DIS_WIDTH 1
+#define	FRF_BB_EE_STRAP_EN_LBN 31
+#define	FRF_BB_EE_STRAP_EN_WIDTH 1
+#define	FRF_BB_EE_STRAP_LBN 24
+#define	FRF_BB_EE_STRAP_WIDTH 4
+#define	FRF_BB_REVISION_ID_LBN 17
+#define	FRF_BB_REVISION_ID_WIDTH 7
+#define	FRF_AB_ONCHIP_SRAM_LBN 16
+#define	FRF_AB_ONCHIP_SRAM_WIDTH 1
+#define	FRF_AB_SF_PRST_LBN 9
+#define	FRF_AB_SF_PRST_WIDTH 1
+#define	FRF_AB_EE_PRST_LBN 8
+#define	FRF_AB_EE_PRST_WIDTH 1
+#define	FRF_AB_ATE_MODE_LBN 3
+#define	FRF_AB_ATE_MODE_WIDTH 1
+#define	FRF_AB_STRAP_PINS_LBN 0
+#define	FRF_AB_STRAP_PINS_WIDTH 3
+
+/* GPIO_CTL_REG: GPIO control register */
+#define	FR_AB_GPIO_CTL 0x00000210
+#define	FRF_AB_GPIO_OUT3_LBN 112
+#define	FRF_AB_GPIO_OUT3_WIDTH 16
+#define	FRF_AB_GPIO_IN3_LBN 104
+#define	FRF_AB_GPIO_IN3_WIDTH 8
+#define	FRF_AB_GPIO_PWRUP_VALUE3_LBN 96
+#define	FRF_AB_GPIO_PWRUP_VALUE3_WIDTH 8
+#define	FRF_AB_GPIO_OUT2_LBN 80
+#define	FRF_AB_GPIO_OUT2_WIDTH 16
+#define	FRF_AB_GPIO_IN2_LBN 72
+#define	FRF_AB_GPIO_IN2_WIDTH 8
+#define	FRF_AB_GPIO_PWRUP_VALUE2_LBN 64
+#define	FRF_AB_GPIO_PWRUP_VALUE2_WIDTH 8
+#define	FRF_AB_GPIO15_OEN_LBN 63
+#define	FRF_AB_GPIO15_OEN_WIDTH 1
+#define	FRF_AB_GPIO14_OEN_LBN 62
+#define	FRF_AB_GPIO14_OEN_WIDTH 1
+#define	FRF_AB_GPIO13_OEN_LBN 61
+#define	FRF_AB_GPIO13_OEN_WIDTH 1
+#define	FRF_AB_GPIO12_OEN_LBN 60
+#define	FRF_AB_GPIO12_OEN_WIDTH 1
+#define	FRF_AB_GPIO11_OEN_LBN 59
+#define	FRF_AB_GPIO11_OEN_WIDTH 1
+#define	FRF_AB_GPIO10_OEN_LBN 58
+#define	FRF_AB_GPIO10_OEN_WIDTH 1
+#define	FRF_AB_GPIO9_OEN_LBN 57
+#define	FRF_AB_GPIO9_OEN_WIDTH 1
+#define	FRF_AB_GPIO8_OEN_LBN 56
+#define	FRF_AB_GPIO8_OEN_WIDTH 1
+#define	FRF_AB_GPIO15_OUT_LBN 55
+#define	FRF_AB_GPIO15_OUT_WIDTH 1
+#define	FRF_AB_GPIO14_OUT_LBN 54
+#define	FRF_AB_GPIO14_OUT_WIDTH 1
+#define	FRF_AB_GPIO13_OUT_LBN 53
+#define	FRF_AB_GPIO13_OUT_WIDTH 1
+#define	FRF_AB_GPIO12_OUT_LBN 52
+#define	FRF_AB_GPIO12_OUT_WIDTH 1
+#define	FRF_AB_GPIO11_OUT_LBN 51
+#define	FRF_AB_GPIO11_OUT_WIDTH 1
+#define	FRF_AB_GPIO10_OUT_LBN 50
+#define	FRF_AB_GPIO10_OUT_WIDTH 1
+#define	FRF_AB_GPIO9_OUT_LBN 49
+#define	FRF_AB_GPIO9_OUT_WIDTH 1
+#define	FRF_AB_GPIO8_OUT_LBN 48
+#define	FRF_AB_GPIO8_OUT_WIDTH 1
+#define	FRF_AB_GPIO15_IN_LBN 47
+#define	FRF_AB_GPIO15_IN_WIDTH 1
+#define	FRF_AB_GPIO14_IN_LBN 46
+#define	FRF_AB_GPIO14_IN_WIDTH 1
+#define	FRF_AB_GPIO13_IN_LBN 45
+#define	FRF_AB_GPIO13_IN_WIDTH 1
+#define	FRF_AB_GPIO12_IN_LBN 44
+#define	FRF_AB_GPIO12_IN_WIDTH 1
+#define	FRF_AB_GPIO11_IN_LBN 43
+#define	FRF_AB_GPIO11_IN_WIDTH 1
+#define	FRF_AB_GPIO10_IN_LBN 42
+#define	FRF_AB_GPIO10_IN_WIDTH 1
+#define	FRF_AB_GPIO9_IN_LBN 41
+#define	FRF_AB_GPIO9_IN_WIDTH 1
+#define	FRF_AB_GPIO8_IN_LBN 40
+#define	FRF_AB_GPIO8_IN_WIDTH 1
+#define	FRF_AB_GPIO15_PWRUP_VALUE_LBN 39
+#define	FRF_AB_GPIO15_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO14_PWRUP_VALUE_LBN 38
+#define	FRF_AB_GPIO14_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO13_PWRUP_VALUE_LBN 37
+#define	FRF_AB_GPIO13_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO12_PWRUP_VALUE_LBN 36
+#define	FRF_AB_GPIO12_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO11_PWRUP_VALUE_LBN 35
+#define	FRF_AB_GPIO11_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO10_PWRUP_VALUE_LBN 34
+#define	FRF_AB_GPIO10_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO9_PWRUP_VALUE_LBN 33
+#define	FRF_AB_GPIO9_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO8_PWRUP_VALUE_LBN 32
+#define	FRF_AB_GPIO8_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_CLK156_OUT_EN_LBN 31
+#define	FRF_AB_CLK156_OUT_EN_WIDTH 1
+#define	FRF_AB_USE_NIC_CLK_LBN 30
+#define	FRF_AB_USE_NIC_CLK_WIDTH 1
+#define	FRF_AB_GPIO5_OEN_LBN 29
+#define	FRF_AB_GPIO5_OEN_WIDTH 1
+#define	FRF_AB_GPIO4_OEN_LBN 28
+#define	FRF_AB_GPIO4_OEN_WIDTH 1
+#define	FRF_AB_GPIO3_OEN_LBN 27
+#define	FRF_AB_GPIO3_OEN_WIDTH 1
+#define	FRF_AB_GPIO2_OEN_LBN 26
+#define	FRF_AB_GPIO2_OEN_WIDTH 1
+#define	FRF_AB_GPIO1_OEN_LBN 25
+#define	FRF_AB_GPIO1_OEN_WIDTH 1
+#define	FRF_AB_GPIO0_OEN_LBN 24
+#define	FRF_AB_GPIO0_OEN_WIDTH 1
+#define	FRF_AB_GPIO7_OUT_LBN 23
+#define	FRF_AB_GPIO7_OUT_WIDTH 1
+#define	FRF_AB_GPIO6_OUT_LBN 22
+#define	FRF_AB_GPIO6_OUT_WIDTH 1
+#define	FRF_AB_GPIO5_OUT_LBN 21
+#define	FRF_AB_GPIO5_OUT_WIDTH 1
+#define	FRF_AB_GPIO4_OUT_LBN 20
+#define	FRF_AB_GPIO4_OUT_WIDTH 1
+#define	FRF_AB_GPIO3_OUT_LBN 19
+#define	FRF_AB_GPIO3_OUT_WIDTH 1
+#define	FRF_AB_GPIO2_OUT_LBN 18
+#define	FRF_AB_GPIO2_OUT_WIDTH 1
+#define	FRF_AB_GPIO1_OUT_LBN 17
+#define	FRF_AB_GPIO1_OUT_WIDTH 1
+#define	FRF_AB_GPIO0_OUT_LBN 16
+#define	FRF_AB_GPIO0_OUT_WIDTH 1
+#define	FRF_AB_GPIO7_IN_LBN 15
+#define	FRF_AB_GPIO7_IN_WIDTH 1
+#define	FRF_AB_GPIO6_IN_LBN 14
+#define	FRF_AB_GPIO6_IN_WIDTH 1
+#define	FRF_AB_GPIO5_IN_LBN 13
+#define	FRF_AB_GPIO5_IN_WIDTH 1
+#define	FRF_AB_GPIO4_IN_LBN 12
+#define	FRF_AB_GPIO4_IN_WIDTH 1
+#define	FRF_AB_GPIO3_IN_LBN 11
+#define	FRF_AB_GPIO3_IN_WIDTH 1
+#define	FRF_AB_GPIO2_IN_LBN 10
+#define	FRF_AB_GPIO2_IN_WIDTH 1
+#define	FRF_AB_GPIO1_IN_LBN 9
+#define	FRF_AB_GPIO1_IN_WIDTH 1
+#define	FRF_AB_GPIO0_IN_LBN 8
+#define	FRF_AB_GPIO0_IN_WIDTH 1
+#define	FRF_AB_GPIO7_PWRUP_VALUE_LBN 7
+#define	FRF_AB_GPIO7_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO6_PWRUP_VALUE_LBN 6
+#define	FRF_AB_GPIO6_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO5_PWRUP_VALUE_LBN 5
+#define	FRF_AB_GPIO5_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO4_PWRUP_VALUE_LBN 4
+#define	FRF_AB_GPIO4_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO3_PWRUP_VALUE_LBN 3
+#define	FRF_AB_GPIO3_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO2_PWRUP_VALUE_LBN 2
+#define	FRF_AB_GPIO2_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO1_PWRUP_VALUE_LBN 1
+#define	FRF_AB_GPIO1_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO0_PWRUP_VALUE_LBN 0
+#define	FRF_AB_GPIO0_PWRUP_VALUE_WIDTH 1
+
+/* GLB_CTL_REG: Global control register */
+#define	FR_AB_GLB_CTL 0x00000220
+#define	FRF_AB_EXT_PHY_RST_CTL_LBN 63
+#define	FRF_AB_EXT_PHY_RST_CTL_WIDTH 1
+#define	FRF_AB_XAUI_SD_RST_CTL_LBN 62
+#define	FRF_AB_XAUI_SD_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_SD_RST_CTL_LBN 61
+#define	FRF_AB_PCIE_SD_RST_CTL_WIDTH 1
+#define	FRF_AA_PCIX_RST_CTL_LBN 60
+#define	FRF_AA_PCIX_RST_CTL_WIDTH 1
+#define	FRF_BB_BIU_RST_CTL_LBN 60
+#define	FRF_BB_BIU_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_STKY_RST_CTL_LBN 59
+#define	FRF_AB_PCIE_STKY_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_NSTKY_RST_CTL_LBN 58
+#define	FRF_AB_PCIE_NSTKY_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_CORE_RST_CTL_LBN 57
+#define	FRF_AB_PCIE_CORE_RST_CTL_WIDTH 1
+#define	FRF_AB_XGRX_RST_CTL_LBN 56
+#define	FRF_AB_XGRX_RST_CTL_WIDTH 1
+#define	FRF_AB_XGTX_RST_CTL_LBN 55
+#define	FRF_AB_XGTX_RST_CTL_WIDTH 1
+#define	FRF_AB_EM_RST_CTL_LBN 54
+#define	FRF_AB_EM_RST_CTL_WIDTH 1
+#define	FRF_AB_EV_RST_CTL_LBN 53
+#define	FRF_AB_EV_RST_CTL_WIDTH 1
+#define	FRF_AB_SR_RST_CTL_LBN 52
+#define	FRF_AB_SR_RST_CTL_WIDTH 1
+#define	FRF_AB_RX_RST_CTL_LBN 51
+#define	FRF_AB_RX_RST_CTL_WIDTH 1
+#define	FRF_AB_TX_RST_CTL_LBN 50
+#define	FRF_AB_TX_RST_CTL_WIDTH 1
+#define	FRF_AB_EE_RST_CTL_LBN 49
+#define	FRF_AB_EE_RST_CTL_WIDTH 1
+#define	FRF_AB_CS_RST_CTL_LBN 48
+#define	FRF_AB_CS_RST_CTL_WIDTH 1
+#define	FRF_AB_HOT_RST_CTL_LBN 40
+#define	FRF_AB_HOT_RST_CTL_WIDTH 2
+#define	FRF_AB_RST_EXT_PHY_LBN 31
+#define	FRF_AB_RST_EXT_PHY_WIDTH 1
+#define	FRF_AB_RST_XAUI_SD_LBN 30
+#define	FRF_AB_RST_XAUI_SD_WIDTH 1
+#define	FRF_AB_RST_PCIE_SD_LBN 29
+#define	FRF_AB_RST_PCIE_SD_WIDTH 1
+#define	FRF_AA_RST_PCIX_LBN 28
+#define	FRF_AA_RST_PCIX_WIDTH 1
+#define	FRF_BB_RST_BIU_LBN 28
+#define	FRF_BB_RST_BIU_WIDTH 1
+#define	FRF_AB_RST_PCIE_STKY_LBN 27
+#define	FRF_AB_RST_PCIE_STKY_WIDTH 1
+#define	FRF_AB_RST_PCIE_NSTKY_LBN 26
+#define	FRF_AB_RST_PCIE_NSTKY_WIDTH 1
+#define	FRF_AB_RST_PCIE_CORE_LBN 25
+#define	FRF_AB_RST_PCIE_CORE_WIDTH 1
+#define	FRF_AB_RST_XGRX_LBN 24
+#define	FRF_AB_RST_XGRX_WIDTH 1
+#define	FRF_AB_RST_XGTX_LBN 23
+#define	FRF_AB_RST_XGTX_WIDTH 1
+#define	FRF_AB_RST_EM_LBN 22
+#define	FRF_AB_RST_EM_WIDTH 1
+#define	FRF_AB_RST_EV_LBN 21
+#define	FRF_AB_RST_EV_WIDTH 1
+#define	FRF_AB_RST_SR_LBN 20
+#define	FRF_AB_RST_SR_WIDTH 1
+#define	FRF_AB_RST_RX_LBN 19
+#define	FRF_AB_RST_RX_WIDTH 1
+#define	FRF_AB_RST_TX_LBN 18
+#define	FRF_AB_RST_TX_WIDTH 1
+#define	FRF_AB_RST_SF_LBN 17
+#define	FRF_AB_RST_SF_WIDTH 1
+#define	FRF_AB_RST_CS_LBN 16
+#define	FRF_AB_RST_CS_WIDTH 1
+#define	FRF_AB_INT_RST_DUR_LBN 4
+#define	FRF_AB_INT_RST_DUR_WIDTH 3
+#define	FRF_AB_EXT_PHY_RST_DUR_LBN 1
+#define	FRF_AB_EXT_PHY_RST_DUR_WIDTH 3
+#define	FFE_AB_EXT_PHY_RST_DUR_10240US 7
+#define	FFE_AB_EXT_PHY_RST_DUR_5120US 6
+#define	FFE_AB_EXT_PHY_RST_DUR_2560US 5
+#define	FFE_AB_EXT_PHY_RST_DUR_1280US 4
+#define	FFE_AB_EXT_PHY_RST_DUR_640US 3
+#define	FFE_AB_EXT_PHY_RST_DUR_320US 2
+#define	FFE_AB_EXT_PHY_RST_DUR_160US 1
+#define	FFE_AB_EXT_PHY_RST_DUR_80US 0
+#define	FRF_AB_SWRST_LBN 0
+#define	FRF_AB_SWRST_WIDTH 1
+
+/* FATAL_INTR_REG_KER: Fatal interrupt register for Kernel */
+#define	FR_AZ_FATAL_INTR_KER 0x00000230
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_EN_LBN 44
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_EN_WIDTH 1
+#define	FRF_AB_PCI_BUSERR_INT_KER_EN_LBN 43
+#define	FRF_AB_PCI_BUSERR_INT_KER_EN_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_KER_EN_LBN 43
+#define	FRF_CZ_MBU_PERR_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_SRAM_OOB_INT_KER_EN_LBN 42
+#define	FRF_AZ_SRAM_OOB_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_BUFID_OOB_INT_KER_EN_LBN 41
+#define	FRF_AZ_BUFID_OOB_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_MEM_PERR_INT_KER_EN_LBN 40
+#define	FRF_AZ_MEM_PERR_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_RBUF_OWN_INT_KER_EN_LBN 39
+#define	FRF_AZ_RBUF_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_TBUF_OWN_INT_KER_EN_LBN 38
+#define	FRF_AZ_TBUF_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_EN_LBN 37
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_EN_LBN 36
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_EVQ_OWN_INT_KER_EN_LBN 35
+#define	FRF_AZ_EVQ_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_EVF_OFLO_INT_KER_EN_LBN 34
+#define	FRF_AZ_EVF_OFLO_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_ILL_ADR_INT_KER_EN_LBN 33
+#define	FRF_AZ_ILL_ADR_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_SRM_PERR_INT_KER_EN_LBN 32
+#define	FRF_AZ_SRM_PERR_INT_KER_EN_WIDTH 1
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_LBN 12
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_WIDTH 1
+#define	FRF_AB_PCI_BUSERR_INT_KER_LBN 11
+#define	FRF_AB_PCI_BUSERR_INT_KER_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_KER_LBN 11
+#define	FRF_CZ_MBU_PERR_INT_KER_WIDTH 1
+#define	FRF_AZ_SRAM_OOB_INT_KER_LBN 10
+#define	FRF_AZ_SRAM_OOB_INT_KER_WIDTH 1
+#define	FRF_AZ_BUFID_DC_OOB_INT_KER_LBN 9
+#define	FRF_AZ_BUFID_DC_OOB_INT_KER_WIDTH 1
+#define	FRF_AZ_MEM_PERR_INT_KER_LBN 8
+#define	FRF_AZ_MEM_PERR_INT_KER_WIDTH 1
+#define	FRF_AZ_RBUF_OWN_INT_KER_LBN 7
+#define	FRF_AZ_RBUF_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_TBUF_OWN_INT_KER_LBN 6
+#define	FRF_AZ_TBUF_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_LBN 5
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_LBN 4
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_EVQ_OWN_INT_KER_LBN 3
+#define	FRF_AZ_EVQ_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_EVF_OFLO_INT_KER_LBN 2
+#define	FRF_AZ_EVF_OFLO_INT_KER_WIDTH 1
+#define	FRF_AZ_ILL_ADR_INT_KER_LBN 1
+#define	FRF_AZ_ILL_ADR_INT_KER_WIDTH 1
+#define	FRF_AZ_SRM_PERR_INT_KER_LBN 0
+#define	FRF_AZ_SRM_PERR_INT_KER_WIDTH 1
+
+/* FATAL_INTR_REG_CHAR: Fatal interrupt register for Char */
+#define	FR_BZ_FATAL_INTR_CHAR 0x00000240
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_EN_LBN 44
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_EN_WIDTH 1
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_EN_LBN 43
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_CHAR_EN_LBN 43
+#define	FRF_CZ_MBU_PERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_EN_LBN 42
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_BUFID_OOB_INT_CHAR_EN_LBN 41
+#define	FRF_BZ_BUFID_OOB_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_MEM_PERR_INT_CHAR_EN_LBN 40
+#define	FRF_BZ_MEM_PERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_EN_LBN 39
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_EN_LBN 38
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_EN_LBN 37
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_EN_LBN 36
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_EN_LBN 35
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_EN_LBN 34
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_ILL_ADR_INT_CHAR_EN_LBN 33
+#define	FRF_BZ_ILL_ADR_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_SRM_PERR_INT_CHAR_EN_LBN 32
+#define	FRF_BZ_SRM_PERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_LBN 12
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_WIDTH 1
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_LBN 11
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_CHAR_LBN 11
+#define	FRF_CZ_MBU_PERR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_LBN 10
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_WIDTH 1
+#define	FRF_BZ_BUFID_DC_OOB_INT_CHAR_LBN 9
+#define	FRF_BZ_BUFID_DC_OOB_INT_CHAR_WIDTH 1
+#define	FRF_BZ_MEM_PERR_INT_CHAR_LBN 8
+#define	FRF_BZ_MEM_PERR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_LBN 7
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_LBN 6
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_LBN 5
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_LBN 4
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_LBN 3
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_LBN 2
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_WIDTH 1
+#define	FRF_BZ_ILL_ADR_INT_CHAR_LBN 1
+#define	FRF_BZ_ILL_ADR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_SRM_PERR_INT_CHAR_LBN 0
+#define	FRF_BZ_SRM_PERR_INT_CHAR_WIDTH 1
+
+/* DP_CTRL_REG: Datapath control register */
+#define	FR_BZ_DP_CTRL 0x00000250
+#define	FRF_BZ_FLS_EVQ_ID_LBN 0
+#define	FRF_BZ_FLS_EVQ_ID_WIDTH 12
+
+/* MEM_STAT_REG: Memory status register */
+#define	FR_AZ_MEM_STAT 0x00000260
+#define	FRF_AB_MEM_PERR_VEC_LBN 53
+#define	FRF_AB_MEM_PERR_VEC_WIDTH 38
+#define	FRF_AB_MBIST_CORR_LBN 38
+#define	FRF_AB_MBIST_CORR_WIDTH 15
+#define	FRF_AB_MBIST_ERR_LBN 0
+#define	FRF_AB_MBIST_ERR_WIDTH 40
+#define	FRF_CZ_MEM_PERR_VEC_LBN 0
+#define	FRF_CZ_MEM_PERR_VEC_WIDTH 35
+
+/* CS_DEBUG_REG: Debug register */
+#define	FR_AZ_CS_DEBUG 0x00000270
+#define	FRF_AB_GLB_DEBUG2_SEL_LBN 50
+#define	FRF_AB_GLB_DEBUG2_SEL_WIDTH 3
+#define	FRF_AB_DEBUG_BLK_SEL2_LBN 47
+#define	FRF_AB_DEBUG_BLK_SEL2_WIDTH 3
+#define	FRF_AB_DEBUG_BLK_SEL1_LBN 44
+#define	FRF_AB_DEBUG_BLK_SEL1_WIDTH 3
+#define	FRF_AB_DEBUG_BLK_SEL0_LBN 41
+#define	FRF_AB_DEBUG_BLK_SEL0_WIDTH 3
+#define	FRF_CZ_CS_PORT_NUM_LBN 40
+#define	FRF_CZ_CS_PORT_NUM_WIDTH 2
+#define	FRF_AB_MISC_DEBUG_ADDR_LBN 36
+#define	FRF_AB_MISC_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_SERDES_DEBUG_ADDR_LBN 31
+#define	FRF_AB_SERDES_DEBUG_ADDR_WIDTH 5
+#define	FRF_CZ_CS_PORT_FPE_LBN 1
+#define	FRF_CZ_CS_PORT_FPE_WIDTH 35
+#define	FRF_AB_EM_DEBUG_ADDR_LBN 26
+#define	FRF_AB_EM_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_SR_DEBUG_ADDR_LBN 21
+#define	FRF_AB_SR_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_EV_DEBUG_ADDR_LBN 16
+#define	FRF_AB_EV_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_RX_DEBUG_ADDR_LBN 11
+#define	FRF_AB_RX_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_TX_DEBUG_ADDR_LBN 6
+#define	FRF_AB_TX_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_CS_BIU_DEBUG_ADDR_LBN 1
+#define	FRF_AB_CS_BIU_DEBUG_ADDR_WIDTH 5
+#define	FRF_AZ_CS_DEBUG_EN_LBN 0
+#define	FRF_AZ_CS_DEBUG_EN_WIDTH 1
+
+/* DRIVER_REG: Driver scratch register [0-7] */
+#define	FR_AZ_DRIVER 0x00000280
+#define	FR_AZ_DRIVER_STEP 16
+#define	FR_AZ_DRIVER_ROWS 8
+#define	FRF_AZ_DRIVER_DW0_LBN 0
+#define	FRF_AZ_DRIVER_DW0_WIDTH 32
+
+/* ALTERA_BUILD_REG: Altera build register */
+#define	FR_AZ_ALTERA_BUILD 0x00000300
+#define	FRF_AZ_ALTERA_BUILD_VER_LBN 0
+#define	FRF_AZ_ALTERA_BUILD_VER_WIDTH 32
+
+/* CSR_SPARE_REG: Spare register */
+#define	FR_AZ_CSR_SPARE 0x00000310
+#define	FRF_AB_MEM_PERR_EN_LBN 64
+#define	FRF_AB_MEM_PERR_EN_WIDTH 38
+#define	FRF_CZ_MEM_PERR_EN_LBN 64
+#define	FRF_CZ_MEM_PERR_EN_WIDTH 35
+#define	FRF_AB_MEM_PERR_EN_TX_DATA_LBN 72
+#define	FRF_AB_MEM_PERR_EN_TX_DATA_WIDTH 2
+#define	FRF_AZ_CSR_SPARE_BITS_LBN 0
+#define	FRF_AZ_CSR_SPARE_BITS_WIDTH 32
+
+/* PCIE_SD_CTL0123_REG: PCIE SerDes control register 0 to 3 */
+#define	FR_AB_PCIE_SD_CTL0123 0x00000320
+#define	FRF_AB_PCIE_TESTSIG_H_LBN 96
+#define	FRF_AB_PCIE_TESTSIG_H_WIDTH 19
+#define	FRF_AB_PCIE_TESTSIG_L_LBN 64
+#define	FRF_AB_PCIE_TESTSIG_L_WIDTH 19
+#define	FRF_AB_PCIE_OFFSET_LBN 56
+#define	FRF_AB_PCIE_OFFSET_WIDTH 8
+#define	FRF_AB_PCIE_OFFSETEN_H_LBN 55
+#define	FRF_AB_PCIE_OFFSETEN_H_WIDTH 1
+#define	FRF_AB_PCIE_OFFSETEN_L_LBN 54
+#define	FRF_AB_PCIE_OFFSETEN_L_WIDTH 1
+#define	FRF_AB_PCIE_HIVMODE_H_LBN 53
+#define	FRF_AB_PCIE_HIVMODE_H_WIDTH 1
+#define	FRF_AB_PCIE_HIVMODE_L_LBN 52
+#define	FRF_AB_PCIE_HIVMODE_L_WIDTH 1
+#define	FRF_AB_PCIE_PARRESET_H_LBN 51
+#define	FRF_AB_PCIE_PARRESET_H_WIDTH 1
+#define	FRF_AB_PCIE_PARRESET_L_LBN 50
+#define	FRF_AB_PCIE_PARRESET_L_WIDTH 1
+#define	FRF_AB_PCIE_LPBKWDRV_H_LBN 49
+#define	FRF_AB_PCIE_LPBKWDRV_H_WIDTH 1
+#define	FRF_AB_PCIE_LPBKWDRV_L_LBN 48
+#define	FRF_AB_PCIE_LPBKWDRV_L_WIDTH 1
+#define	FRF_AB_PCIE_LPBK_LBN 40
+#define	FRF_AB_PCIE_LPBK_WIDTH 8
+#define	FRF_AB_PCIE_PARLPBK_LBN 32
+#define	FRF_AB_PCIE_PARLPBK_WIDTH 8
+#define	FRF_AB_PCIE_RXTERMADJ_H_LBN 30
+#define	FRF_AB_PCIE_RXTERMADJ_H_WIDTH 2
+#define	FRF_AB_PCIE_RXTERMADJ_L_LBN 28
+#define	FRF_AB_PCIE_RXTERMADJ_L_WIDTH 2
+#define	FFE_AB_PCIE_RXTERMADJ_MIN15PCNT 3
+#define	FFE_AB_PCIE_RXTERMADJ_PL10PCNT 2
+#define	FFE_AB_PCIE_RXTERMADJ_MIN17PCNT 1
+#define	FFE_AB_PCIE_RXTERMADJ_NOMNL 0
+#define	FRF_AB_PCIE_TXTERMADJ_H_LBN 26
+#define	FRF_AB_PCIE_TXTERMADJ_H_WIDTH 2
+#define	FRF_AB_PCIE_TXTERMADJ_L_LBN 24
+#define	FRF_AB_PCIE_TXTERMADJ_L_WIDTH 2
+#define	FFE_AB_PCIE_TXTERMADJ_MIN15PCNT 3
+#define	FFE_AB_PCIE_TXTERMADJ_PL10PCNT 2
+#define	FFE_AB_PCIE_TXTERMADJ_MIN17PCNT 1
+#define	FFE_AB_PCIE_TXTERMADJ_NOMNL 0
+#define	FRF_AB_PCIE_RXEQCTL_H_LBN 18
+#define	FRF_AB_PCIE_RXEQCTL_H_WIDTH 2
+#define	FRF_AB_PCIE_RXEQCTL_L_LBN 16
+#define	FRF_AB_PCIE_RXEQCTL_L_WIDTH 2
+#define	FFE_AB_PCIE_RXEQCTL_OFF_ALT 3
+#define	FFE_AB_PCIE_RXEQCTL_OFF 2
+#define	FFE_AB_PCIE_RXEQCTL_MIN 1
+#define	FFE_AB_PCIE_RXEQCTL_MAX 0
+#define	FRF_AB_PCIE_HIDRV_LBN 8
+#define	FRF_AB_PCIE_HIDRV_WIDTH 8
+#define	FRF_AB_PCIE_LODRV_LBN 0
+#define	FRF_AB_PCIE_LODRV_WIDTH 8
+
+/* PCIE_SD_CTL45_REG: PCIE SerDes control register 4 and 5 */
+#define	FR_AB_PCIE_SD_CTL45 0x00000330
+#define	FRF_AB_PCIE_DTX7_LBN 60
+#define	FRF_AB_PCIE_DTX7_WIDTH 4
+#define	FRF_AB_PCIE_DTX6_LBN 56
+#define	FRF_AB_PCIE_DTX6_WIDTH 4
+#define	FRF_AB_PCIE_DTX5_LBN 52
+#define	FRF_AB_PCIE_DTX5_WIDTH 4
+#define	FRF_AB_PCIE_DTX4_LBN 48
+#define	FRF_AB_PCIE_DTX4_WIDTH 4
+#define	FRF_AB_PCIE_DTX3_LBN 44
+#define	FRF_AB_PCIE_DTX3_WIDTH 4
+#define	FRF_AB_PCIE_DTX2_LBN 40
+#define	FRF_AB_PCIE_DTX2_WIDTH 4
+#define	FRF_AB_PCIE_DTX1_LBN 36
+#define	FRF_AB_PCIE_DTX1_WIDTH 4
+#define	FRF_AB_PCIE_DTX0_LBN 32
+#define	FRF_AB_PCIE_DTX0_WIDTH 4
+#define	FRF_AB_PCIE_DEQ7_LBN 28
+#define	FRF_AB_PCIE_DEQ7_WIDTH 4
+#define	FRF_AB_PCIE_DEQ6_LBN 24
+#define	FRF_AB_PCIE_DEQ6_WIDTH 4
+#define	FRF_AB_PCIE_DEQ5_LBN 20
+#define	FRF_AB_PCIE_DEQ5_WIDTH 4
+#define	FRF_AB_PCIE_DEQ4_LBN 16
+#define	FRF_AB_PCIE_DEQ4_WIDTH 4
+#define	FRF_AB_PCIE_DEQ3_LBN 12
+#define	FRF_AB_PCIE_DEQ3_WIDTH 4
+#define	FRF_AB_PCIE_DEQ2_LBN 8
+#define	FRF_AB_PCIE_DEQ2_WIDTH 4
+#define	FRF_AB_PCIE_DEQ1_LBN 4
+#define	FRF_AB_PCIE_DEQ1_WIDTH 4
+#define	FRF_AB_PCIE_DEQ0_LBN 0
+#define	FRF_AB_PCIE_DEQ0_WIDTH 4
+
+/* PCIE_PCS_CTL_STAT_REG: PCIE PCS control and status register */
+#define	FR_AB_PCIE_PCS_CTL_STAT 0x00000340
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_H_LBN 52
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_H_WIDTH 4
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_L_LBN 48
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_L_WIDTH 4
+#define	FRF_AB_PCIE_PRBSERR_LBN 40
+#define	FRF_AB_PCIE_PRBSERR_WIDTH 8
+#define	FRF_AB_PCIE_PRBSERRH0_LBN 32
+#define	FRF_AB_PCIE_PRBSERRH0_WIDTH 8
+#define	FRF_AB_PCIE_FASTINIT_H_LBN 15
+#define	FRF_AB_PCIE_FASTINIT_H_WIDTH 1
+#define	FRF_AB_PCIE_FASTINIT_L_LBN 14
+#define	FRF_AB_PCIE_FASTINIT_L_WIDTH 1
+#define	FRF_AB_PCIE_CTCDISABLE_H_LBN 13
+#define	FRF_AB_PCIE_CTCDISABLE_H_WIDTH 1
+#define	FRF_AB_PCIE_CTCDISABLE_L_LBN 12
+#define	FRF_AB_PCIE_CTCDISABLE_L_WIDTH 1
+#define	FRF_AB_PCIE_PRBSSYNC_H_LBN 11
+#define	FRF_AB_PCIE_PRBSSYNC_H_WIDTH 1
+#define	FRF_AB_PCIE_PRBSSYNC_L_LBN 10
+#define	FRF_AB_PCIE_PRBSSYNC_L_WIDTH 1
+#define	FRF_AB_PCIE_PRBSERRACK_H_LBN 9
+#define	FRF_AB_PCIE_PRBSERRACK_H_WIDTH 1
+#define	FRF_AB_PCIE_PRBSERRACK_L_LBN 8
+#define	FRF_AB_PCIE_PRBSERRACK_L_WIDTH 1
+#define	FRF_AB_PCIE_PRBSSEL_LBN 0
+#define	FRF_AB_PCIE_PRBSSEL_WIDTH 8
+
+/* DEBUG_DATA_OUT_REG: Live Debug and Debug 2 out ports */
+#define	FR_BB_DEBUG_DATA_OUT 0x00000350
+#define	FRF_BB_DEBUG2_PORT_LBN 25
+#define	FRF_BB_DEBUG2_PORT_WIDTH 15
+#define	FRF_BB_DEBUG1_PORT_LBN 0
+#define	FRF_BB_DEBUG1_PORT_WIDTH 25
+
+/* EVQ_RPTR_REGP0: Event queue read pointer register */
+#define	FR_BZ_EVQ_RPTR_P0 0x00000400
+#define	FR_BZ_EVQ_RPTR_P0_STEP 8192
+#define	FR_BZ_EVQ_RPTR_P0_ROWS 1024
+/* EVQ_RPTR_REG_KER: Event queue read pointer register */
+#define	FR_AA_EVQ_RPTR_KER 0x00011b00
+#define	FR_AA_EVQ_RPTR_KER_STEP 4
+#define	FR_AA_EVQ_RPTR_KER_ROWS 4
+/* EVQ_RPTR_REG: Event queue read pointer register */
+#define	FR_BZ_EVQ_RPTR 0x00fa0000
+#define	FR_BZ_EVQ_RPTR_STEP 16
+#define	FR_BB_EVQ_RPTR_ROWS 4096
+#define	FR_CZ_EVQ_RPTR_ROWS 1024
+/* EVQ_RPTR_REGP123: Event queue read pointer register */
+#define	FR_BB_EVQ_RPTR_P123 0x01000400
+#define	FR_BB_EVQ_RPTR_P123_STEP 8192
+#define	FR_BB_EVQ_RPTR_P123_ROWS 3072
+#define	FRF_AZ_EVQ_RPTR_VLD_LBN 15
+#define	FRF_AZ_EVQ_RPTR_VLD_WIDTH 1
+#define	FRF_AZ_EVQ_RPTR_LBN 0
+#define	FRF_AZ_EVQ_RPTR_WIDTH 15
+
+/* TIMER_COMMAND_REGP0: Timer Command Registers */
+#define	FR_BZ_TIMER_COMMAND_P0 0x00000420
+#define	FR_BZ_TIMER_COMMAND_P0_STEP 8192
+#define	FR_BZ_TIMER_COMMAND_P0_ROWS 1024
+/* TIMER_COMMAND_REG_KER: Timer Command Registers */
+#define	FR_AA_TIMER_COMMAND_KER 0x00000420
+#define	FR_AA_TIMER_COMMAND_KER_STEP 8192
+#define	FR_AA_TIMER_COMMAND_KER_ROWS 4
+/* TIMER_COMMAND_REGP123: Timer Command Registers */
+#define	FR_BB_TIMER_COMMAND_P123 0x01000420
+#define	FR_BB_TIMER_COMMAND_P123_STEP 8192
+#define	FR_BB_TIMER_COMMAND_P123_ROWS 3072
+#define	FRF_CZ_TC_TIMER_MODE_LBN 14
+#define	FRF_CZ_TC_TIMER_MODE_WIDTH 2
+#define	FRF_AB_TC_TIMER_MODE_LBN 12
+#define	FRF_AB_TC_TIMER_MODE_WIDTH 2
+#define	FRF_CZ_TC_TIMER_VAL_LBN 0
+#define	FRF_CZ_TC_TIMER_VAL_WIDTH 14
+#define	FRF_AB_TC_TIMER_VAL_LBN 0
+#define	FRF_AB_TC_TIMER_VAL_WIDTH 12
+
+/* DRV_EV_REG: Driver generated event register */
+#define	FR_AZ_DRV_EV 0x00000440
+#define	FRF_AZ_DRV_EV_QID_LBN 64
+#define	FRF_AZ_DRV_EV_QID_WIDTH 12
+#define	FRF_AZ_DRV_EV_DATA_LBN 0
+#define	FRF_AZ_DRV_EV_DATA_WIDTH 64
+
+/* EVQ_CTL_REG: Event queue control register */
+#define	FR_AZ_EVQ_CTL 0x00000450
+#define	FRF_CZ_RX_EVQ_WAKEUP_MASK_LBN 15
+#define	FRF_CZ_RX_EVQ_WAKEUP_MASK_WIDTH 10
+#define	FRF_BB_RX_EVQ_WAKEUP_MASK_LBN 15
+#define	FRF_BB_RX_EVQ_WAKEUP_MASK_WIDTH 6
+#define	FRF_AZ_EVQ_OWNERR_CTL_LBN 14
+#define	FRF_AZ_EVQ_OWNERR_CTL_WIDTH 1
+#define	FRF_AZ_EVQ_FIFO_AF_TH_LBN 7
+#define	FRF_AZ_EVQ_FIFO_AF_TH_WIDTH 7
+#define	FRF_AZ_EVQ_FIFO_NOTAF_TH_LBN 0
+#define	FRF_AZ_EVQ_FIFO_NOTAF_TH_WIDTH 7
+
+/* EVQ_CNT1_REG: Event counter 1 register */
+#define	FR_AZ_EVQ_CNT1 0x00000460
+#define	FRF_AZ_EVQ_CNT_PRE_FIFO_LBN 120
+#define	FRF_AZ_EVQ_CNT_PRE_FIFO_WIDTH 7
+#define	FRF_AZ_EVQ_CNT_TOBIU_LBN 100
+#define	FRF_AZ_EVQ_CNT_TOBIU_WIDTH 20
+#define	FRF_AZ_EVQ_TX_REQ_CNT_LBN 80
+#define	FRF_AZ_EVQ_TX_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_RX_REQ_CNT_LBN 60
+#define	FRF_AZ_EVQ_RX_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_EM_REQ_CNT_LBN 40
+#define	FRF_AZ_EVQ_EM_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_CSR_REQ_CNT_LBN 20
+#define	FRF_AZ_EVQ_CSR_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_ERR_REQ_CNT_LBN 0
+#define	FRF_AZ_EVQ_ERR_REQ_CNT_WIDTH 20
+
+/* EVQ_CNT2_REG: Event counter 2 register */
+#define	FR_AZ_EVQ_CNT2 0x00000470
+#define	FRF_AZ_EVQ_UPD_REQ_CNT_LBN 104
+#define	FRF_AZ_EVQ_UPD_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_CLR_REQ_CNT_LBN 84
+#define	FRF_AZ_EVQ_CLR_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_RDY_CNT_LBN 80
+#define	FRF_AZ_EVQ_RDY_CNT_WIDTH 4
+#define	FRF_AZ_EVQ_WU_REQ_CNT_LBN 60
+#define	FRF_AZ_EVQ_WU_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_WET_REQ_CNT_LBN 40
+#define	FRF_AZ_EVQ_WET_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_INIT_REQ_CNT_LBN 20
+#define	FRF_AZ_EVQ_INIT_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_TM_REQ_CNT_LBN 0
+#define	FRF_AZ_EVQ_TM_REQ_CNT_WIDTH 20
+
+/* USR_EV_REG: Event mailbox register */
+#define	FR_CZ_USR_EV 0x00000540
+#define	FR_CZ_USR_EV_STEP 8192
+#define	FR_CZ_USR_EV_ROWS 1024
+#define	FRF_CZ_USR_EV_DATA_LBN 0
+#define	FRF_CZ_USR_EV_DATA_WIDTH 32
+
+/* BUF_TBL_CFG_REG: Buffer table configuration register */
+#define	FR_AZ_BUF_TBL_CFG 0x00000600
+#define	FRF_AZ_BUF_TBL_MODE_LBN 3
+#define	FRF_AZ_BUF_TBL_MODE_WIDTH 1
+
+/* SRM_RX_DC_CFG_REG: SRAM receive descriptor cache configuration register */
+#define	FR_AZ_SRM_RX_DC_CFG 0x00000610
+#define	FRF_AZ_SRM_CLK_TMP_EN_LBN 21
+#define	FRF_AZ_SRM_CLK_TMP_EN_WIDTH 1
+#define	FRF_AZ_SRM_RX_DC_BASE_ADR_LBN 0
+#define	FRF_AZ_SRM_RX_DC_BASE_ADR_WIDTH 21
+
+/* SRM_TX_DC_CFG_REG: SRAM transmit descriptor cache configuration register */
+#define	FR_AZ_SRM_TX_DC_CFG 0x00000620
+#define	FRF_AZ_SRM_TX_DC_BASE_ADR_LBN 0
+#define	FRF_AZ_SRM_TX_DC_BASE_ADR_WIDTH 21
+
+/* SRM_CFG_REG: SRAM configuration register */
+#define	FR_AZ_SRM_CFG 0x00000630
+#define	FRF_AZ_SRM_OOB_ADR_INTEN_LBN 5
+#define	FRF_AZ_SRM_OOB_ADR_INTEN_WIDTH 1
+#define	FRF_AZ_SRM_OOB_BUF_INTEN_LBN 4
+#define	FRF_AZ_SRM_OOB_BUF_INTEN_WIDTH 1
+#define	FRF_AZ_SRM_INIT_EN_LBN 3
+#define	FRF_AZ_SRM_INIT_EN_WIDTH 1
+#define	FRF_AZ_SRM_NUM_BANK_LBN 2
+#define	FRF_AZ_SRM_NUM_BANK_WIDTH 1
+#define	FRF_AZ_SRM_BANK_SIZE_LBN 0
+#define	FRF_AZ_SRM_BANK_SIZE_WIDTH 2
+
+/* BUF_TBL_UPD_REG: Buffer table update register */
+#define	FR_AZ_BUF_TBL_UPD 0x00000650
+#define	FRF_AZ_BUF_UPD_CMD_LBN 63
+#define	FRF_AZ_BUF_UPD_CMD_WIDTH 1
+#define	FRF_AZ_BUF_CLR_CMD_LBN 62
+#define	FRF_AZ_BUF_CLR_CMD_WIDTH 1
+#define	FRF_AZ_BUF_CLR_END_ID_LBN 32
+#define	FRF_AZ_BUF_CLR_END_ID_WIDTH 20
+#define	FRF_AZ_BUF_CLR_START_ID_LBN 0
+#define	FRF_AZ_BUF_CLR_START_ID_WIDTH 20
+
+/* SRM_UPD_EVQ_REG: Buffer table update register */
+#define	FR_AZ_SRM_UPD_EVQ 0x00000660
+#define	FRF_AZ_SRM_UPD_EVQ_ID_LBN 0
+#define	FRF_AZ_SRM_UPD_EVQ_ID_WIDTH 12
+
+/* SRAM_PARITY_REG: SRAM parity register. */
+#define	FR_AZ_SRAM_PARITY 0x00000670
+#define	FRF_CZ_BYPASS_ECC_LBN 3
+#define	FRF_CZ_BYPASS_ECC_WIDTH 1
+#define	FRF_CZ_SEC_INT_LBN 2
+#define	FRF_CZ_SEC_INT_WIDTH 1
+#define	FRF_CZ_FORCE_SRAM_DOUBLE_ERR_LBN 1
+#define	FRF_CZ_FORCE_SRAM_DOUBLE_ERR_WIDTH 1
+#define	FRF_AB_FORCE_SRAM_PERR_LBN 0
+#define	FRF_AB_FORCE_SRAM_PERR_WIDTH 1
+#define	FRF_CZ_FORCE_SRAM_SINGLE_ERR_LBN 0
+#define	FRF_CZ_FORCE_SRAM_SINGLE_ERR_WIDTH 1
+
+/* RX_CFG_REG: Receive configuration register */
+#define	FR_AZ_RX_CFG 0x00000800
+#define	FRF_CZ_RX_MIN_KBUF_SIZE_LBN 72
+#define	FRF_CZ_RX_MIN_KBUF_SIZE_WIDTH 14
+#define	FRF_CZ_RX_HDR_SPLIT_EN_LBN 71
+#define	FRF_CZ_RX_HDR_SPLIT_EN_WIDTH 1
+#define	FRF_CZ_RX_HDR_SPLIT_PLD_BUF_SIZE_LBN 62
+#define	FRF_CZ_RX_HDR_SPLIT_PLD_BUF_SIZE_WIDTH 9
+#define	FRF_CZ_RX_HDR_SPLIT_HDR_BUF_SIZE_LBN 53
+#define	FRF_CZ_RX_HDR_SPLIT_HDR_BUF_SIZE_WIDTH 9
+#define	FRF_CZ_RX_PRE_RFF_IPG_LBN 49
+#define	FRF_CZ_RX_PRE_RFF_IPG_WIDTH 4
+#define	FRF_BZ_RX_TCP_SUP_LBN 48
+#define	FRF_BZ_RX_TCP_SUP_WIDTH 1
+#define	FRF_BZ_RX_INGR_EN_LBN 47
+#define	FRF_BZ_RX_INGR_EN_WIDTH 1
+#define	FRF_BZ_RX_IP_HASH_LBN 46
+#define	FRF_BZ_RX_IP_HASH_WIDTH 1
+#define	FRF_BZ_RX_HASH_ALG_LBN 45
+#define	FRF_BZ_RX_HASH_ALG_WIDTH 1
+#define	FRF_BZ_RX_HASH_INSRT_HDR_LBN 44
+#define	FRF_BZ_RX_HASH_INSRT_HDR_WIDTH 1
+#define	FRF_BZ_RX_DESC_PUSH_EN_LBN 43
+#define	FRF_BZ_RX_DESC_PUSH_EN_WIDTH 1
+#define	FRF_BZ_RX_RDW_PATCH_EN_LBN 42
+#define	FRF_BZ_RX_RDW_PATCH_EN_WIDTH 1
+#define	FRF_BB_RX_PCI_BURST_SIZE_LBN 39
+#define	FRF_BB_RX_PCI_BURST_SIZE_WIDTH 3
+#define	FRF_BZ_RX_OWNERR_CTL_LBN 38
+#define	FRF_BZ_RX_OWNERR_CTL_WIDTH 1
+#define	FRF_BZ_RX_XON_TX_TH_LBN 33
+#define	FRF_BZ_RX_XON_TX_TH_WIDTH 5
+#define	FRF_AA_RX_DESC_PUSH_EN_LBN 35
+#define	FRF_AA_RX_DESC_PUSH_EN_WIDTH 1
+#define	FRF_AA_RX_RDW_PATCH_EN_LBN 34
+#define	FRF_AA_RX_RDW_PATCH_EN_WIDTH 1
+#define	FRF_AA_RX_PCI_BURST_SIZE_LBN 31
+#define	FRF_AA_RX_PCI_BURST_SIZE_WIDTH 3
+#define	FRF_BZ_RX_XOFF_TX_TH_LBN 28
+#define	FRF_BZ_RX_XOFF_TX_TH_WIDTH 5
+#define	FRF_AA_RX_OWNERR_CTL_LBN 30
+#define	FRF_AA_RX_OWNERR_CTL_WIDTH 1
+#define	FRF_AA_RX_XON_TX_TH_LBN 25
+#define	FRF_AA_RX_XON_TX_TH_WIDTH 5
+#define	FRF_BZ_RX_USR_BUF_SIZE_LBN 19
+#define	FRF_BZ_RX_USR_BUF_SIZE_WIDTH 9
+#define	FRF_AA_RX_XOFF_TX_TH_LBN 20
+#define	FRF_AA_RX_XOFF_TX_TH_WIDTH 5
+#define	FRF_AA_RX_USR_BUF_SIZE_LBN 11
+#define	FRF_AA_RX_USR_BUF_SIZE_WIDTH 9
+#define	FRF_BZ_RX_XON_MAC_TH_LBN 10
+#define	FRF_BZ_RX_XON_MAC_TH_WIDTH 9
+#define	FRF_AA_RX_XON_MAC_TH_LBN 6
+#define	FRF_AA_RX_XON_MAC_TH_WIDTH 5
+#define	FRF_BZ_RX_XOFF_MAC_TH_LBN 1
+#define	FRF_BZ_RX_XOFF_MAC_TH_WIDTH 9
+#define	FRF_AA_RX_XOFF_MAC_TH_LBN 1
+#define	FRF_AA_RX_XOFF_MAC_TH_WIDTH 5
+#define	FRF_AZ_RX_XOFF_MAC_EN_LBN 0
+#define	FRF_AZ_RX_XOFF_MAC_EN_WIDTH 1
+
+/* RX_FILTER_CTL_REG: Receive filter control registers */
+#define	FR_BZ_RX_FILTER_CTL 0x00000810
+#define	FRF_CZ_ETHERNET_WILDCARD_SEARCH_LIMIT_LBN 94
+#define	FRF_CZ_ETHERNET_WILDCARD_SEARCH_LIMIT_WIDTH 8
+#define	FRF_CZ_ETHERNET_FULL_SEARCH_LIMIT_LBN 86
+#define	FRF_CZ_ETHERNET_FULL_SEARCH_LIMIT_WIDTH 8
+#define	FRF_CZ_RX_FILTER_ALL_VLAN_ETHERTYPES_LBN 85
+#define	FRF_CZ_RX_FILTER_ALL_VLAN_ETHERTYPES_WIDTH 1
+#define	FRF_CZ_RX_VLAN_MATCH_ETHERTYPE_LBN 69
+#define	FRF_CZ_RX_VLAN_MATCH_ETHERTYPE_WIDTH 16
+#define	FRF_CZ_MULTICAST_NOMATCH_Q_ID_LBN 57
+#define	FRF_CZ_MULTICAST_NOMATCH_Q_ID_WIDTH 12
+#define	FRF_CZ_MULTICAST_NOMATCH_RSS_ENABLED_LBN 56
+#define	FRF_CZ_MULTICAST_NOMATCH_RSS_ENABLED_WIDTH 1
+#define	FRF_CZ_MULTICAST_NOMATCH_IP_OVERRIDE_LBN 55
+#define	FRF_CZ_MULTICAST_NOMATCH_IP_OVERRIDE_WIDTH 1
+#define	FRF_CZ_UNICAST_NOMATCH_Q_ID_LBN 43
+#define	FRF_CZ_UNICAST_NOMATCH_Q_ID_WIDTH 12
+#define	FRF_CZ_UNICAST_NOMATCH_RSS_ENABLED_LBN 42
+#define	FRF_CZ_UNICAST_NOMATCH_RSS_ENABLED_WIDTH 1
+#define	FRF_CZ_UNICAST_NOMATCH_IP_OVERRIDE_LBN 41
+#define	FRF_CZ_UNICAST_NOMATCH_IP_OVERRIDE_WIDTH 1
+#define	FRF_BZ_SCATTER_ENBL_NO_MATCH_Q_LBN 40
+#define	FRF_BZ_SCATTER_ENBL_NO_MATCH_Q_WIDTH 1
+#define	FRF_BZ_UDP_FULL_SRCH_LIMIT_LBN 32
+#define	FRF_BZ_UDP_FULL_SRCH_LIMIT_WIDTH 8
+#define	FRF_BZ_NUM_KER_LBN 24
+#define	FRF_BZ_NUM_KER_WIDTH 2
+#define	FRF_BZ_UDP_WILD_SRCH_LIMIT_LBN 16
+#define	FRF_BZ_UDP_WILD_SRCH_LIMIT_WIDTH 8
+#define	FRF_BZ_TCP_WILD_SRCH_LIMIT_LBN 8
+#define	FRF_BZ_TCP_WILD_SRCH_LIMIT_WIDTH 8
+#define	FRF_BZ_TCP_FULL_SRCH_LIMIT_LBN 0
+#define	FRF_BZ_TCP_FULL_SRCH_LIMIT_WIDTH 8
+
+/* RX_FLUSH_DESCQ_REG: Receive flush descriptor queue register */
+#define	FR_AZ_RX_FLUSH_DESCQ 0x00000820
+#define	FRF_AZ_RX_FLUSH_DESCQ_CMD_LBN 24
+#define	FRF_AZ_RX_FLUSH_DESCQ_CMD_WIDTH 1
+#define	FRF_AZ_RX_FLUSH_DESCQ_LBN 0
+#define	FRF_AZ_RX_FLUSH_DESCQ_WIDTH 12
+
+/* RX_DESC_UPD_REGP0: Receive descriptor update register. */
+#define	FR_BZ_RX_DESC_UPD_P0 0x00000830
+#define	FR_BZ_RX_DESC_UPD_P0_STEP 8192
+#define	FR_BZ_RX_DESC_UPD_P0_ROWS 1024
+/* RX_DESC_UPD_REG_KER: Receive descriptor update register. */
+#define	FR_AA_RX_DESC_UPD_KER 0x00000830
+#define	FR_AA_RX_DESC_UPD_KER_STEP 8192
+#define	FR_AA_RX_DESC_UPD_KER_ROWS 4
+/* RX_DESC_UPD_REGP123: Receive descriptor update register. */
+#define	FR_BB_RX_DESC_UPD_P123 0x01000830
+#define	FR_BB_RX_DESC_UPD_P123_STEP 8192
+#define	FR_BB_RX_DESC_UPD_P123_ROWS 3072
+#define	FRF_AZ_RX_DESC_WPTR_LBN 96
+#define	FRF_AZ_RX_DESC_WPTR_WIDTH 12
+#define	FRF_AZ_RX_DESC_PUSH_CMD_LBN 95
+#define	FRF_AZ_RX_DESC_PUSH_CMD_WIDTH 1
+#define	FRF_AZ_RX_DESC_LBN 0
+#define	FRF_AZ_RX_DESC_WIDTH 64
+
+/* RX_DC_CFG_REG: Receive descriptor cache configuration register */
+#define	FR_AZ_RX_DC_CFG 0x00000840
+#define	FRF_AB_RX_MAX_PF_LBN 2
+#define	FRF_AB_RX_MAX_PF_WIDTH 2
+#define	FRF_AZ_RX_DC_SIZE_LBN 0
+#define	FRF_AZ_RX_DC_SIZE_WIDTH 2
+#define	FFE_AZ_RX_DC_SIZE_64 3
+#define	FFE_AZ_RX_DC_SIZE_32 2
+#define	FFE_AZ_RX_DC_SIZE_16 1
+#define	FFE_AZ_RX_DC_SIZE_8 0
+
+/* RX_DC_PF_WM_REG: Receive descriptor cache pre-fetch watermark register */
+#define	FR_AZ_RX_DC_PF_WM 0x00000850
+#define	FRF_AZ_RX_DC_PF_HWM_LBN 6
+#define	FRF_AZ_RX_DC_PF_HWM_WIDTH 6
+#define	FRF_AZ_RX_DC_PF_LWM_LBN 0
+#define	FRF_AZ_RX_DC_PF_LWM_WIDTH 6
+
+/* RX_RSS_TKEY_REG: RSS Toeplitz hash key */
+#define	FR_BZ_RX_RSS_TKEY 0x00000860
+#define	FRF_BZ_RX_RSS_TKEY_HI_LBN 64
+#define	FRF_BZ_RX_RSS_TKEY_HI_WIDTH 64
+#define	FRF_BZ_RX_RSS_TKEY_LO_LBN 0
+#define	FRF_BZ_RX_RSS_TKEY_LO_WIDTH 64
+
+/* RX_NODESC_DROP_REG: Receive dropped packet counter register */
+#define	FR_AZ_RX_NODESC_DROP 0x00000880
+#define	FRF_CZ_RX_NODESC_DROP_CNT_LBN 0
+#define	FRF_CZ_RX_NODESC_DROP_CNT_WIDTH 32
+#define	FRF_AB_RX_NODESC_DROP_CNT_LBN 0
+#define	FRF_AB_RX_NODESC_DROP_CNT_WIDTH 16
+
+/* RX_SELF_RST_REG: Receive self reset register */
+#define	FR_AA_RX_SELF_RST 0x00000890
+#define	FRF_AA_RX_ISCSI_DIS_LBN 17
+#define	FRF_AA_RX_ISCSI_DIS_WIDTH 1
+#define	FRF_AA_RX_SW_RST_REG_LBN 16
+#define	FRF_AA_RX_SW_RST_REG_WIDTH 1
+#define FRF_AA_RX_NODESC_WAIT_DIS_LBN 9
+#define FRF_AA_RX_NODESC_WAIT_DIS_WIDTH 1
+#define	FRF_AA_RX_SELF_RST_EN_LBN 8
+#define	FRF_AA_RX_SELF_RST_EN_WIDTH 1
+#define	FRF_AA_RX_MAX_PF_LAT_LBN 4
+#define	FRF_AA_RX_MAX_PF_LAT_WIDTH 4
+#define	FRF_AA_RX_MAX_LU_LAT_LBN 0
+#define	FRF_AA_RX_MAX_LU_LAT_WIDTH 4
+
+/* RX_DEBUG_REG: undocumented register */
+#define	FR_AZ_RX_DEBUG 0x000008a0
+#define	FRF_AZ_RX_DEBUG_LBN 0
+#define	FRF_AZ_RX_DEBUG_WIDTH 64
+
+/* RX_PUSH_DROP_REG: Receive descriptor push dropped counter register */
+#define	FR_AZ_RX_PUSH_DROP 0x000008b0
+#define	FRF_AZ_RX_PUSH_DROP_CNT_LBN 0
+#define	FRF_AZ_RX_PUSH_DROP_CNT_WIDTH 32
+
+/* RX_RSS_IPV6_REG1: IPv6 RSS Toeplitz hash key low bytes */
+#define	FR_CZ_RX_RSS_IPV6_REG1 0x000008d0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_LO_LBN 0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_LO_WIDTH 128
+
+/* RX_RSS_IPV6_REG2: IPv6 RSS Toeplitz hash key middle bytes */
+#define	FR_CZ_RX_RSS_IPV6_REG2 0x000008e0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_MID_LBN 0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_MID_WIDTH 128
+
+/* RX_RSS_IPV6_REG3: IPv6 RSS Toeplitz hash key upper bytes and IPv6 RSS settings */
+#define	FR_CZ_RX_RSS_IPV6_REG3 0x000008f0
+#define	FRF_CZ_RX_RSS_IPV6_THASH_ENABLE_LBN 66
+#define	FRF_CZ_RX_RSS_IPV6_THASH_ENABLE_WIDTH 1
+#define	FRF_CZ_RX_RSS_IPV6_IP_THASH_ENABLE_LBN 65
+#define	FRF_CZ_RX_RSS_IPV6_IP_THASH_ENABLE_WIDTH 1
+#define	FRF_CZ_RX_RSS_IPV6_TCP_SUPPRESS_LBN 64
+#define	FRF_CZ_RX_RSS_IPV6_TCP_SUPPRESS_WIDTH 1
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_HI_LBN 0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_HI_WIDTH 64
+
+/* TX_FLUSH_DESCQ_REG: Transmit flush descriptor queue register */
+#define	FR_AZ_TX_FLUSH_DESCQ 0x00000a00
+#define	FRF_AZ_TX_FLUSH_DESCQ_CMD_LBN 12
+#define	FRF_AZ_TX_FLUSH_DESCQ_CMD_WIDTH 1
+#define	FRF_AZ_TX_FLUSH_DESCQ_LBN 0
+#define	FRF_AZ_TX_FLUSH_DESCQ_WIDTH 12
+
+/* TX_DESC_UPD_REGP0: Transmit descriptor update register. */
+#define	FR_BZ_TX_DESC_UPD_P0 0x00000a10
+#define	FR_BZ_TX_DESC_UPD_P0_STEP 8192
+#define	FR_BZ_TX_DESC_UPD_P0_ROWS 1024
+/* TX_DESC_UPD_REG_KER: Transmit descriptor update register. */
+#define	FR_AA_TX_DESC_UPD_KER 0x00000a10
+#define	FR_AA_TX_DESC_UPD_KER_STEP 8192
+#define	FR_AA_TX_DESC_UPD_KER_ROWS 8
+/* TX_DESC_UPD_REGP123: Transmit descriptor update register. */
+#define	FR_BB_TX_DESC_UPD_P123 0x01000a10
+#define	FR_BB_TX_DESC_UPD_P123_STEP 8192
+#define	FR_BB_TX_DESC_UPD_P123_ROWS 3072
+#define	FRF_AZ_TX_DESC_WPTR_LBN 96
+#define	FRF_AZ_TX_DESC_WPTR_WIDTH 12
+#define	FRF_AZ_TX_DESC_PUSH_CMD_LBN 95
+#define	FRF_AZ_TX_DESC_PUSH_CMD_WIDTH 1
+#define	FRF_AZ_TX_DESC_LBN 0
+#define	FRF_AZ_TX_DESC_WIDTH 95
+
+/* TX_DC_CFG_REG: Transmit descriptor cache configuration register */
+#define	FR_AZ_TX_DC_CFG 0x00000a20
+#define	FRF_AZ_TX_DC_SIZE_LBN 0
+#define	FRF_AZ_TX_DC_SIZE_WIDTH 2
+#define	FFE_AZ_TX_DC_SIZE_32 2
+#define	FFE_AZ_TX_DC_SIZE_16 1
+#define	FFE_AZ_TX_DC_SIZE_8 0
+
+/* TX_CHKSM_CFG_REG: Transmit checksum configuration register */
+#define	FR_AA_TX_CHKSM_CFG 0x00000a30
+#define	FRF_AA_TX_Q_CHKSM_DIS_96_127_LBN 96
+#define	FRF_AA_TX_Q_CHKSM_DIS_96_127_WIDTH 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_64_95_LBN 64
+#define	FRF_AA_TX_Q_CHKSM_DIS_64_95_WIDTH 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_32_63_LBN 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_32_63_WIDTH 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_0_31_LBN 0
+#define	FRF_AA_TX_Q_CHKSM_DIS_0_31_WIDTH 32
+
+/* TX_CFG_REG: Transmit configuration register */
+#define	FR_AZ_TX_CFG 0x00000a50
+#define	FRF_CZ_TX_CONT_LOOKUP_THRESH_RANGE_LBN 114
+#define	FRF_CZ_TX_CONT_LOOKUP_THRESH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_FILTER_TEST_MODE_BIT_LBN 113
+#define	FRF_CZ_TX_FILTER_TEST_MODE_BIT_WIDTH 1
+#define	FRF_CZ_TX_ETH_FILTER_WILD_SEARCH_RANGE_LBN 105
+#define	FRF_CZ_TX_ETH_FILTER_WILD_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_ETH_FILTER_FULL_SEARCH_RANGE_LBN 97
+#define	FRF_CZ_TX_ETH_FILTER_FULL_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_UDPIP_FILTER_WILD_SEARCH_RANGE_LBN 89
+#define	FRF_CZ_TX_UDPIP_FILTER_WILD_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_UDPIP_FILTER_FULL_SEARCH_RANGE_LBN 81
+#define	FRF_CZ_TX_UDPIP_FILTER_FULL_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_TCPIP_FILTER_WILD_SEARCH_RANGE_LBN 73
+#define	FRF_CZ_TX_TCPIP_FILTER_WILD_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_TCPIP_FILTER_FULL_SEARCH_RANGE_LBN 65
+#define	FRF_CZ_TX_TCPIP_FILTER_FULL_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_FILTER_ALL_VLAN_ETHERTYPES_BIT_LBN 64
+#define	FRF_CZ_TX_FILTER_ALL_VLAN_ETHERTYPES_BIT_WIDTH 1
+#define	FRF_CZ_TX_VLAN_MATCH_ETHERTYPE_RANGE_LBN 48
+#define	FRF_CZ_TX_VLAN_MATCH_ETHERTYPE_RANGE_WIDTH 16
+#define	FRF_CZ_TX_FILTER_EN_BIT_LBN 47
+#define	FRF_CZ_TX_FILTER_EN_BIT_WIDTH 1
+#define	FRF_AZ_TX_IP_ID_P0_OFS_LBN 16
+#define	FRF_AZ_TX_IP_ID_P0_OFS_WIDTH 15
+#define	FRF_AZ_TX_NO_EOP_DISC_EN_LBN 5
+#define	FRF_AZ_TX_NO_EOP_DISC_EN_WIDTH 1
+#define	FRF_AZ_TX_P1_PRI_EN_LBN 4
+#define	FRF_AZ_TX_P1_PRI_EN_WIDTH 1
+#define	FRF_AZ_TX_OWNERR_CTL_LBN 2
+#define	FRF_AZ_TX_OWNERR_CTL_WIDTH 1
+#define	FRF_AA_TX_NON_IP_DROP_DIS_LBN 1
+#define	FRF_AA_TX_NON_IP_DROP_DIS_WIDTH 1
+#define	FRF_AZ_TX_IP_ID_REP_EN_LBN 0
+#define	FRF_AZ_TX_IP_ID_REP_EN_WIDTH 1
+
+/* TX_PUSH_DROP_REG: Transmit push dropped register */
+#define	FR_AZ_TX_PUSH_DROP 0x00000a60
+#define	FRF_AZ_TX_PUSH_DROP_CNT_LBN 0
+#define	FRF_AZ_TX_PUSH_DROP_CNT_WIDTH 32
+
+/* TX_RESERVED_REG: Transmit configuration register */
+#define	FR_AZ_TX_RESERVED 0x00000a80
+#define	FRF_AZ_TX_EVT_CNT_LBN 121
+#define	FRF_AZ_TX_EVT_CNT_WIDTH 7
+#define	FRF_AZ_TX_PREF_AGE_CNT_LBN 119
+#define	FRF_AZ_TX_PREF_AGE_CNT_WIDTH 2
+#define	FRF_AZ_TX_RD_COMP_TMR_LBN 96
+#define	FRF_AZ_TX_RD_COMP_TMR_WIDTH 23
+#define	FRF_AZ_TX_PUSH_EN_LBN 89
+#define	FRF_AZ_TX_PUSH_EN_WIDTH 1
+#define	FRF_AZ_TX_PUSH_CHK_DIS_LBN 88
+#define	FRF_AZ_TX_PUSH_CHK_DIS_WIDTH 1
+#define	FRF_AZ_TX_D_FF_FULL_P0_LBN 85
+#define	FRF_AZ_TX_D_FF_FULL_P0_WIDTH 1
+#define	FRF_AZ_TX_DMAR_ST_P0_LBN 81
+#define	FRF_AZ_TX_DMAR_ST_P0_WIDTH 1
+#define	FRF_AZ_TX_DMAQ_ST_LBN 78
+#define	FRF_AZ_TX_DMAQ_ST_WIDTH 1
+#define	FRF_AZ_TX_RX_SPACER_LBN 64
+#define	FRF_AZ_TX_RX_SPACER_WIDTH 8
+#define	FRF_AZ_TX_DROP_ABORT_EN_LBN 60
+#define	FRF_AZ_TX_DROP_ABORT_EN_WIDTH 1
+#define	FRF_AZ_TX_SOFT_EVT_EN_LBN 59
+#define	FRF_AZ_TX_SOFT_EVT_EN_WIDTH 1
+#define	FRF_AZ_TX_PS_EVT_DIS_LBN 58
+#define	FRF_AZ_TX_PS_EVT_DIS_WIDTH 1
+#define	FRF_AZ_TX_RX_SPACER_EN_LBN 57
+#define	FRF_AZ_TX_RX_SPACER_EN_WIDTH 1
+#define	FRF_AZ_TX_XP_TIMER_LBN 52
+#define	FRF_AZ_TX_XP_TIMER_WIDTH 5
+#define	FRF_AZ_TX_PREF_SPACER_LBN 44
+#define	FRF_AZ_TX_PREF_SPACER_WIDTH 8
+#define	FRF_AZ_TX_PREF_WD_TMR_LBN 22
+#define	FRF_AZ_TX_PREF_WD_TMR_WIDTH 22
+#define	FRF_AZ_TX_ONLY1TAG_LBN 21
+#define	FRF_AZ_TX_ONLY1TAG_WIDTH 1
+#define	FRF_AZ_TX_PREF_THRESHOLD_LBN 19
+#define	FRF_AZ_TX_PREF_THRESHOLD_WIDTH 2
+#define	FRF_AZ_TX_ONE_PKT_PER_Q_LBN 18
+#define	FRF_AZ_TX_ONE_PKT_PER_Q_WIDTH 1
+#define	FRF_AZ_TX_DIS_NON_IP_EV_LBN 17
+#define	FRF_AZ_TX_DIS_NON_IP_EV_WIDTH 1
+#define	FRF_AA_TX_DMA_FF_THR_LBN 16
+#define	FRF_AA_TX_DMA_FF_THR_WIDTH 1
+#define	FRF_AZ_TX_DMA_SPACER_LBN 8
+#define	FRF_AZ_TX_DMA_SPACER_WIDTH 8
+#define	FRF_AA_TX_TCP_DIS_LBN 7
+#define	FRF_AA_TX_TCP_DIS_WIDTH 1
+#define	FRF_BZ_TX_FLUSH_MIN_LEN_EN_LBN 7
+#define	FRF_BZ_TX_FLUSH_MIN_LEN_EN_WIDTH 1
+#define	FRF_AA_TX_IP_DIS_LBN 6
+#define	FRF_AA_TX_IP_DIS_WIDTH 1
+#define	FRF_AZ_TX_MAX_CPL_LBN 2
+#define	FRF_AZ_TX_MAX_CPL_WIDTH 2
+#define	FFE_AZ_TX_MAX_CPL_16 3
+#define	FFE_AZ_TX_MAX_CPL_8 2
+#define	FFE_AZ_TX_MAX_CPL_4 1
+#define	FFE_AZ_TX_MAX_CPL_NOLIMIT 0
+#define	FRF_AZ_TX_MAX_PREF_LBN 0
+#define	FRF_AZ_TX_MAX_PREF_WIDTH 2
+#define	FFE_AZ_TX_MAX_PREF_32 3
+#define	FFE_AZ_TX_MAX_PREF_16 2
+#define	FFE_AZ_TX_MAX_PREF_8 1
+#define	FFE_AZ_TX_MAX_PREF_OFF 0
+
+/* TX_PACE_REG: Transmit pace control register */
+#define	FR_BZ_TX_PACE 0x00000a90
+#define	FRF_BZ_TX_PACE_SB_NOT_AF_LBN 19
+#define	FRF_BZ_TX_PACE_SB_NOT_AF_WIDTH 10
+#define	FRF_BZ_TX_PACE_SB_AF_LBN 9
+#define	FRF_BZ_TX_PACE_SB_AF_WIDTH 10
+#define	FRF_BZ_TX_PACE_FB_BASE_LBN 5
+#define	FRF_BZ_TX_PACE_FB_BASE_WIDTH 4
+#define	FRF_BZ_TX_PACE_BIN_TH_LBN 0
+#define	FRF_BZ_TX_PACE_BIN_TH_WIDTH 5
+
+/* TX_PACE_DROP_QID_REG: PACE Drop QID Counter */
+#define	FR_BZ_TX_PACE_DROP_QID 0x00000aa0
+#define	FRF_BZ_TX_PACE_QID_DRP_CNT_LBN 0
+#define	FRF_BZ_TX_PACE_QID_DRP_CNT_WIDTH 16
+
+/* TX_VLAN_REG: Transmit VLAN tag register */
+#define	FR_BB_TX_VLAN 0x00000ae0
+#define	FRF_BB_TX_VLAN_EN_LBN 127
+#define	FRF_BB_TX_VLAN_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN7_PORT1_EN_LBN 125
+#define	FRF_BB_TX_VLAN7_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN7_PORT0_EN_LBN 124
+#define	FRF_BB_TX_VLAN7_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN7_LBN 112
+#define	FRF_BB_TX_VLAN7_WIDTH 12
+#define	FRF_BB_TX_VLAN6_PORT1_EN_LBN 109
+#define	FRF_BB_TX_VLAN6_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN6_PORT0_EN_LBN 108
+#define	FRF_BB_TX_VLAN6_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN6_LBN 96
+#define	FRF_BB_TX_VLAN6_WIDTH 12
+#define	FRF_BB_TX_VLAN5_PORT1_EN_LBN 93
+#define	FRF_BB_TX_VLAN5_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN5_PORT0_EN_LBN 92
+#define	FRF_BB_TX_VLAN5_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN5_LBN 80
+#define	FRF_BB_TX_VLAN5_WIDTH 12
+#define	FRF_BB_TX_VLAN4_PORT1_EN_LBN 77
+#define	FRF_BB_TX_VLAN4_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN4_PORT0_EN_LBN 76
+#define	FRF_BB_TX_VLAN4_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN4_LBN 64
+#define	FRF_BB_TX_VLAN4_WIDTH 12
+#define	FRF_BB_TX_VLAN3_PORT1_EN_LBN 61
+#define	FRF_BB_TX_VLAN3_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN3_PORT0_EN_LBN 60
+#define	FRF_BB_TX_VLAN3_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN3_LBN 48
+#define	FRF_BB_TX_VLAN3_WIDTH 12
+#define	FRF_BB_TX_VLAN2_PORT1_EN_LBN 45
+#define	FRF_BB_TX_VLAN2_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN2_PORT0_EN_LBN 44
+#define	FRF_BB_TX_VLAN2_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN2_LBN 32
+#define	FRF_BB_TX_VLAN2_WIDTH 12
+#define	FRF_BB_TX_VLAN1_PORT1_EN_LBN 29
+#define	FRF_BB_TX_VLAN1_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN1_PORT0_EN_LBN 28
+#define	FRF_BB_TX_VLAN1_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN1_LBN 16
+#define	FRF_BB_TX_VLAN1_WIDTH 12
+#define	FRF_BB_TX_VLAN0_PORT1_EN_LBN 13
+#define	FRF_BB_TX_VLAN0_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN0_PORT0_EN_LBN 12
+#define	FRF_BB_TX_VLAN0_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN0_LBN 0
+#define	FRF_BB_TX_VLAN0_WIDTH 12
+
+/* TX_IPFIL_PORTEN_REG: Transmit filter control register */
+#define	FR_BZ_TX_IPFIL_PORTEN 0x00000af0
+#define	FRF_BZ_TX_MADR0_FIL_EN_LBN 64
+#define	FRF_BZ_TX_MADR0_FIL_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL31_PORT_EN_LBN 62
+#define	FRF_BB_TX_IPFIL31_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL30_PORT_EN_LBN 60
+#define	FRF_BB_TX_IPFIL30_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL29_PORT_EN_LBN 58
+#define	FRF_BB_TX_IPFIL29_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL28_PORT_EN_LBN 56
+#define	FRF_BB_TX_IPFIL28_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL27_PORT_EN_LBN 54
+#define	FRF_BB_TX_IPFIL27_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL26_PORT_EN_LBN 52
+#define	FRF_BB_TX_IPFIL26_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL25_PORT_EN_LBN 50
+#define	FRF_BB_TX_IPFIL25_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL24_PORT_EN_LBN 48
+#define	FRF_BB_TX_IPFIL24_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL23_PORT_EN_LBN 46
+#define	FRF_BB_TX_IPFIL23_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL22_PORT_EN_LBN 44
+#define	FRF_BB_TX_IPFIL22_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL21_PORT_EN_LBN 42
+#define	FRF_BB_TX_IPFIL21_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL20_PORT_EN_LBN 40
+#define	FRF_BB_TX_IPFIL20_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL19_PORT_EN_LBN 38
+#define	FRF_BB_TX_IPFIL19_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL18_PORT_EN_LBN 36
+#define	FRF_BB_TX_IPFIL18_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL17_PORT_EN_LBN 34
+#define	FRF_BB_TX_IPFIL17_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL16_PORT_EN_LBN 32
+#define	FRF_BB_TX_IPFIL16_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL15_PORT_EN_LBN 30
+#define	FRF_BB_TX_IPFIL15_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL14_PORT_EN_LBN 28
+#define	FRF_BB_TX_IPFIL14_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL13_PORT_EN_LBN 26
+#define	FRF_BB_TX_IPFIL13_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL12_PORT_EN_LBN 24
+#define	FRF_BB_TX_IPFIL12_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL11_PORT_EN_LBN 22
+#define	FRF_BB_TX_IPFIL11_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL10_PORT_EN_LBN 20
+#define	FRF_BB_TX_IPFIL10_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL9_PORT_EN_LBN 18
+#define	FRF_BB_TX_IPFIL9_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL8_PORT_EN_LBN 16
+#define	FRF_BB_TX_IPFIL8_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL7_PORT_EN_LBN 14
+#define	FRF_BB_TX_IPFIL7_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL6_PORT_EN_LBN 12
+#define	FRF_BB_TX_IPFIL6_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL5_PORT_EN_LBN 10
+#define	FRF_BB_TX_IPFIL5_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL4_PORT_EN_LBN 8
+#define	FRF_BB_TX_IPFIL4_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL3_PORT_EN_LBN 6
+#define	FRF_BB_TX_IPFIL3_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL2_PORT_EN_LBN 4
+#define	FRF_BB_TX_IPFIL2_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL1_PORT_EN_LBN 2
+#define	FRF_BB_TX_IPFIL1_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL0_PORT_EN_LBN 0
+#define	FRF_BB_TX_IPFIL0_PORT_EN_WIDTH 1
+
+/* TX_IPFIL_TBL: Transmit IP source address filter table */
+#define	FR_BB_TX_IPFIL_TBL 0x00000b00
+#define	FR_BB_TX_IPFIL_TBL_STEP 16
+#define	FR_BB_TX_IPFIL_TBL_ROWS 16
+#define	FRF_BB_TX_IPFIL_MASK_1_LBN 96
+#define	FRF_BB_TX_IPFIL_MASK_1_WIDTH 32
+#define	FRF_BB_TX_IP_SRC_ADR_1_LBN 64
+#define	FRF_BB_TX_IP_SRC_ADR_1_WIDTH 32
+#define	FRF_BB_TX_IPFIL_MASK_0_LBN 32
+#define	FRF_BB_TX_IPFIL_MASK_0_WIDTH 32
+#define	FRF_BB_TX_IP_SRC_ADR_0_LBN 0
+#define	FRF_BB_TX_IP_SRC_ADR_0_WIDTH 32
+
+/* MD_TXD_REG: PHY management transmit data register */
+#define	FR_AB_MD_TXD 0x00000c00
+#define	FRF_AB_MD_TXD_LBN 0
+#define	FRF_AB_MD_TXD_WIDTH 16
+
+/* MD_RXD_REG: PHY management receive data register */
+#define	FR_AB_MD_RXD 0x00000c10
+#define	FRF_AB_MD_RXD_LBN 0
+#define	FRF_AB_MD_RXD_WIDTH 16
+
+/* MD_CS_REG: PHY management configuration & status register */
+#define	FR_AB_MD_CS 0x00000c20
+#define	FRF_AB_MD_RD_EN_CMD_LBN 15
+#define	FRF_AB_MD_RD_EN_CMD_WIDTH 1
+#define	FRF_AB_MD_WR_EN_CMD_LBN 14
+#define	FRF_AB_MD_WR_EN_CMD_WIDTH 1
+#define	FRF_AB_MD_ADDR_CMD_LBN 13
+#define	FRF_AB_MD_ADDR_CMD_WIDTH 1
+#define	FRF_AB_MD_PT_LBN 7
+#define	FRF_AB_MD_PT_WIDTH 3
+#define	FRF_AB_MD_PL_LBN 6
+#define	FRF_AB_MD_PL_WIDTH 1
+#define	FRF_AB_MD_INT_CLR_LBN 5
+#define	FRF_AB_MD_INT_CLR_WIDTH 1
+#define	FRF_AB_MD_GC_LBN 4
+#define	FRF_AB_MD_GC_WIDTH 1
+#define	FRF_AB_MD_PRSP_LBN 3
+#define	FRF_AB_MD_PRSP_WIDTH 1
+#define	FRF_AB_MD_RIC_LBN 2
+#define	FRF_AB_MD_RIC_WIDTH 1
+#define	FRF_AB_MD_RDC_LBN 1
+#define	FRF_AB_MD_RDC_WIDTH 1
+#define	FRF_AB_MD_WRC_LBN 0
+#define	FRF_AB_MD_WRC_WIDTH 1
+
+/* MD_PHY_ADR_REG: PHY management PHY address register */
+#define	FR_AB_MD_PHY_ADR 0x00000c30
+#define	FRF_AB_MD_PHY_ADR_LBN 0
+#define	FRF_AB_MD_PHY_ADR_WIDTH 16
+
+/* MD_ID_REG: PHY management ID register */
+#define	FR_AB_MD_ID 0x00000c40
+#define	FRF_AB_MD_PRT_ADR_LBN 11
+#define	FRF_AB_MD_PRT_ADR_WIDTH 5
+#define	FRF_AB_MD_DEV_ADR_LBN 6
+#define	FRF_AB_MD_DEV_ADR_WIDTH 5
+
+/* MD_STAT_REG: PHY management status & mask register */
+#define	FR_AB_MD_STAT 0x00000c50
+#define	FRF_AB_MD_PINT_LBN 4
+#define	FRF_AB_MD_PINT_WIDTH 1
+#define	FRF_AB_MD_DONE_LBN 3
+#define	FRF_AB_MD_DONE_WIDTH 1
+#define	FRF_AB_MD_BSERR_LBN 2
+#define	FRF_AB_MD_BSERR_WIDTH 1
+#define	FRF_AB_MD_LNFL_LBN 1
+#define	FRF_AB_MD_LNFL_WIDTH 1
+#define	FRF_AB_MD_BSY_LBN 0
+#define	FRF_AB_MD_BSY_WIDTH 1
+
+/* MAC_STAT_DMA_REG: Port MAC statistical counter DMA register */
+#define	FR_AB_MAC_STAT_DMA 0x00000c60
+#define	FRF_AB_MAC_STAT_DMA_CMD_LBN 48
+#define	FRF_AB_MAC_STAT_DMA_CMD_WIDTH 1
+#define	FRF_AB_MAC_STAT_DMA_ADR_LBN 0
+#define	FRF_AB_MAC_STAT_DMA_ADR_WIDTH 48
+
+/* MAC_CTRL_REG: Port MAC control register */
+#define	FR_AB_MAC_CTRL 0x00000c80
+#define	FRF_AB_MAC_XOFF_VAL_LBN 16
+#define	FRF_AB_MAC_XOFF_VAL_WIDTH 16
+#define	FRF_BB_TXFIFO_DRAIN_EN_LBN 7
+#define	FRF_BB_TXFIFO_DRAIN_EN_WIDTH 1
+#define	FRF_AB_MAC_XG_DISTXCRC_LBN 5
+#define	FRF_AB_MAC_XG_DISTXCRC_WIDTH 1
+#define	FRF_AB_MAC_BCAD_ACPT_LBN 4
+#define	FRF_AB_MAC_BCAD_ACPT_WIDTH 1
+#define	FRF_AB_MAC_UC_PROM_LBN 3
+#define	FRF_AB_MAC_UC_PROM_WIDTH 1
+#define	FRF_AB_MAC_LINK_STATUS_LBN 2
+#define	FRF_AB_MAC_LINK_STATUS_WIDTH 1
+#define	FRF_AB_MAC_SPEED_LBN 0
+#define	FRF_AB_MAC_SPEED_WIDTH 2
+#define	FFE_AB_MAC_SPEED_10G 3
+#define	FFE_AB_MAC_SPEED_1G 2
+#define	FFE_AB_MAC_SPEED_100M 1
+#define	FFE_AB_MAC_SPEED_10M 0
+
+/* GEN_MODE_REG: General Purpose mode register (external interrupt mask) */
+#define	FR_BB_GEN_MODE 0x00000c90
+#define	FRF_BB_XFP_PHY_INT_POL_SEL_LBN 3
+#define	FRF_BB_XFP_PHY_INT_POL_SEL_WIDTH 1
+#define	FRF_BB_XG_PHY_INT_POL_SEL_LBN 2
+#define	FRF_BB_XG_PHY_INT_POL_SEL_WIDTH 1
+#define	FRF_BB_XFP_PHY_INT_MASK_LBN 1
+#define	FRF_BB_XFP_PHY_INT_MASK_WIDTH 1
+#define	FRF_BB_XG_PHY_INT_MASK_LBN 0
+#define	FRF_BB_XG_PHY_INT_MASK_WIDTH 1
+
+/* MAC_MC_HASH_REG0: Multicast address hash table */
+#define	FR_AB_MAC_MC_HASH_REG0 0x00000ca0
+#define	FRF_AB_MAC_MCAST_HASH0_LBN 0
+#define	FRF_AB_MAC_MCAST_HASH0_WIDTH 128
+
+/* MAC_MC_HASH_REG1: Multicast address hash table */
+#define	FR_AB_MAC_MC_HASH_REG1 0x00000cb0
+#define	FRF_AB_MAC_MCAST_HASH1_LBN 0
+#define	FRF_AB_MAC_MCAST_HASH1_WIDTH 128
+
+/* GM_CFG1_REG: GMAC configuration register 1 */
+#define	FR_AB_GM_CFG1 0x00000e00
+#define	FRF_AB_GM_SW_RST_LBN 31
+#define	FRF_AB_GM_SW_RST_WIDTH 1
+#define	FRF_AB_GM_SIM_RST_LBN 30
+#define	FRF_AB_GM_SIM_RST_WIDTH 1
+#define	FRF_AB_GM_RST_RX_MAC_CTL_LBN 19
+#define	FRF_AB_GM_RST_RX_MAC_CTL_WIDTH 1
+#define	FRF_AB_GM_RST_TX_MAC_CTL_LBN 18
+#define	FRF_AB_GM_RST_TX_MAC_CTL_WIDTH 1
+#define	FRF_AB_GM_RST_RX_FUNC_LBN 17
+#define	FRF_AB_GM_RST_RX_FUNC_WIDTH 1
+#define	FRF_AB_GM_RST_TX_FUNC_LBN 16
+#define	FRF_AB_GM_RST_TX_FUNC_WIDTH 1
+#define	FRF_AB_GM_LOOP_LBN 8
+#define	FRF_AB_GM_LOOP_WIDTH 1
+#define	FRF_AB_GM_RX_FC_EN_LBN 5
+#define	FRF_AB_GM_RX_FC_EN_WIDTH 1
+#define	FRF_AB_GM_TX_FC_EN_LBN 4
+#define	FRF_AB_GM_TX_FC_EN_WIDTH 1
+#define	FRF_AB_GM_SYNC_RXEN_LBN 3
+#define	FRF_AB_GM_SYNC_RXEN_WIDTH 1
+#define	FRF_AB_GM_RX_EN_LBN 2
+#define	FRF_AB_GM_RX_EN_WIDTH 1
+#define	FRF_AB_GM_SYNC_TXEN_LBN 1
+#define	FRF_AB_GM_SYNC_TXEN_WIDTH 1
+#define	FRF_AB_GM_TX_EN_LBN 0
+#define	FRF_AB_GM_TX_EN_WIDTH 1
+
+/* GM_CFG2_REG: GMAC configuration register 2 */
+#define	FR_AB_GM_CFG2 0x00000e10
+#define	FRF_AB_GM_PAMBL_LEN_LBN 12
+#define	FRF_AB_GM_PAMBL_LEN_WIDTH 4
+#define	FRF_AB_GM_IF_MODE_LBN 8
+#define	FRF_AB_GM_IF_MODE_WIDTH 2
+#define	FFE_AB_IF_MODE_BYTE_MODE 2
+#define	FFE_AB_IF_MODE_NIBBLE_MODE 1
+#define	FRF_AB_GM_HUGE_FRM_EN_LBN 5
+#define	FRF_AB_GM_HUGE_FRM_EN_WIDTH 1
+#define	FRF_AB_GM_LEN_CHK_LBN 4
+#define	FRF_AB_GM_LEN_CHK_WIDTH 1
+#define	FRF_AB_GM_PAD_CRC_EN_LBN 2
+#define	FRF_AB_GM_PAD_CRC_EN_WIDTH 1
+#define	FRF_AB_GM_CRC_EN_LBN 1
+#define	FRF_AB_GM_CRC_EN_WIDTH 1
+#define	FRF_AB_GM_FD_LBN 0
+#define	FRF_AB_GM_FD_WIDTH 1
+
+/* GM_IPG_REG: GMAC IPG register */
+#define	FR_AB_GM_IPG 0x00000e20
+#define	FRF_AB_GM_NONB2B_IPG1_LBN 24
+#define	FRF_AB_GM_NONB2B_IPG1_WIDTH 7
+#define	FRF_AB_GM_NONB2B_IPG2_LBN 16
+#define	FRF_AB_GM_NONB2B_IPG2_WIDTH 7
+#define	FRF_AB_GM_MIN_IPG_ENF_LBN 8
+#define	FRF_AB_GM_MIN_IPG_ENF_WIDTH 8
+#define	FRF_AB_GM_B2B_IPG_LBN 0
+#define	FRF_AB_GM_B2B_IPG_WIDTH 7
+
+/* GM_HD_REG: GMAC half duplex register */
+#define	FR_AB_GM_HD 0x00000e30
+#define	FRF_AB_GM_ALT_BOFF_VAL_LBN 20
+#define	FRF_AB_GM_ALT_BOFF_VAL_WIDTH 4
+#define	FRF_AB_GM_ALT_BOFF_EN_LBN 19
+#define	FRF_AB_GM_ALT_BOFF_EN_WIDTH 1
+#define	FRF_AB_GM_BP_NO_BOFF_LBN 18
+#define	FRF_AB_GM_BP_NO_BOFF_WIDTH 1
+#define	FRF_AB_GM_DIS_BOFF_LBN 17
+#define	FRF_AB_GM_DIS_BOFF_WIDTH 1
+#define	FRF_AB_GM_EXDEF_TX_EN_LBN 16
+#define	FRF_AB_GM_EXDEF_TX_EN_WIDTH 1
+#define	FRF_AB_GM_RTRY_LIMIT_LBN 12
+#define	FRF_AB_GM_RTRY_LIMIT_WIDTH 4
+#define	FRF_AB_GM_COL_WIN_LBN 0
+#define	FRF_AB_GM_COL_WIN_WIDTH 10
+
+/* GM_MAX_FLEN_REG: GMAC maximum frame length register */
+#define	FR_AB_GM_MAX_FLEN 0x00000e40
+#define	FRF_AB_GM_MAX_FLEN_LBN 0
+#define	FRF_AB_GM_MAX_FLEN_WIDTH 16
+
+/* GM_TEST_REG: GMAC test register */
+#define	FR_AB_GM_TEST 0x00000e70
+#define	FRF_AB_GM_MAX_BOFF_LBN 3
+#define	FRF_AB_GM_MAX_BOFF_WIDTH 1
+#define	FRF_AB_GM_REG_TX_FLOW_EN_LBN 2
+#define	FRF_AB_GM_REG_TX_FLOW_EN_WIDTH 1
+#define	FRF_AB_GM_TEST_PAUSE_LBN 1
+#define	FRF_AB_GM_TEST_PAUSE_WIDTH 1
+#define	FRF_AB_GM_SHORT_SLOT_LBN 0
+#define	FRF_AB_GM_SHORT_SLOT_WIDTH 1
+
+/* GM_ADR1_REG: GMAC station address register 1 */
+#define	FR_AB_GM_ADR1 0x00000f00
+#define	FRF_AB_GM_ADR_B0_LBN 24
+#define	FRF_AB_GM_ADR_B0_WIDTH 8
+#define	FRF_AB_GM_ADR_B1_LBN 16
+#define	FRF_AB_GM_ADR_B1_WIDTH 8
+#define	FRF_AB_GM_ADR_B2_LBN 8
+#define	FRF_AB_GM_ADR_B2_WIDTH 8
+#define	FRF_AB_GM_ADR_B3_LBN 0
+#define	FRF_AB_GM_ADR_B3_WIDTH 8
+
+/* GM_ADR2_REG: GMAC station address register 2 */
+#define	FR_AB_GM_ADR2 0x00000f10
+#define	FRF_AB_GM_ADR_B4_LBN 24
+#define	FRF_AB_GM_ADR_B4_WIDTH 8
+#define	FRF_AB_GM_ADR_B5_LBN 16
+#define	FRF_AB_GM_ADR_B5_WIDTH 8
+
+/* GMF_CFG0_REG: GMAC FIFO configuration register 0 */
+#define	FR_AB_GMF_CFG0 0x00000f20
+#define	FRF_AB_GMF_FTFENRPLY_LBN 20
+#define	FRF_AB_GMF_FTFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_STFENRPLY_LBN 19
+#define	FRF_AB_GMF_STFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_FRFENRPLY_LBN 18
+#define	FRF_AB_GMF_FRFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_SRFENRPLY_LBN 17
+#define	FRF_AB_GMF_SRFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_WTMENRPLY_LBN 16
+#define	FRF_AB_GMF_WTMENRPLY_WIDTH 1
+#define	FRF_AB_GMF_FTFENREQ_LBN 12
+#define	FRF_AB_GMF_FTFENREQ_WIDTH 1
+#define	FRF_AB_GMF_STFENREQ_LBN 11
+#define	FRF_AB_GMF_STFENREQ_WIDTH 1
+#define	FRF_AB_GMF_FRFENREQ_LBN 10
+#define	FRF_AB_GMF_FRFENREQ_WIDTH 1
+#define	FRF_AB_GMF_SRFENREQ_LBN 9
+#define	FRF_AB_GMF_SRFENREQ_WIDTH 1
+#define	FRF_AB_GMF_WTMENREQ_LBN 8
+#define	FRF_AB_GMF_WTMENREQ_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTFT_LBN 4
+#define	FRF_AB_GMF_HSTRSTFT_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTST_LBN 3
+#define	FRF_AB_GMF_HSTRSTST_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTFR_LBN 2
+#define	FRF_AB_GMF_HSTRSTFR_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTSR_LBN 1
+#define	FRF_AB_GMF_HSTRSTSR_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTWT_LBN 0
+#define	FRF_AB_GMF_HSTRSTWT_WIDTH 1
+
+/* GMF_CFG1_REG: GMAC FIFO configuration register 1 */
+#define	FR_AB_GMF_CFG1 0x00000f30
+#define	FRF_AB_GMF_CFGFRTH_LBN 16
+#define	FRF_AB_GMF_CFGFRTH_WIDTH 5
+#define	FRF_AB_GMF_CFGXOFFRTX_LBN 0
+#define	FRF_AB_GMF_CFGXOFFRTX_WIDTH 16
+
+/* GMF_CFG2_REG: GMAC FIFO configuration register 2 */
+#define	FR_AB_GMF_CFG2 0x00000f40
+#define	FRF_AB_GMF_CFGHWM_LBN 16
+#define	FRF_AB_GMF_CFGHWM_WIDTH 6
+#define	FRF_AB_GMF_CFGLWM_LBN 0
+#define	FRF_AB_GMF_CFGLWM_WIDTH 6
+
+/* GMF_CFG3_REG: GMAC FIFO configuration register 3 */
+#define	FR_AB_GMF_CFG3 0x00000f50
+#define	FRF_AB_GMF_CFGHWMFT_LBN 16
+#define	FRF_AB_GMF_CFGHWMFT_WIDTH 6
+#define	FRF_AB_GMF_CFGFTTH_LBN 0
+#define	FRF_AB_GMF_CFGFTTH_WIDTH 6
+
+/* GMF_CFG4_REG: GMAC FIFO configuration register 4 */
+#define	FR_AB_GMF_CFG4 0x00000f60
+#define	FRF_AB_GMF_HSTFLTRFRM_LBN 0
+#define	FRF_AB_GMF_HSTFLTRFRM_WIDTH 18
+
+/* GMF_CFG5_REG: GMAC FIFO configuration register 5 */
+#define	FR_AB_GMF_CFG5 0x00000f70
+#define	FRF_AB_GMF_CFGHDPLX_LBN 22
+#define	FRF_AB_GMF_CFGHDPLX_WIDTH 1
+#define	FRF_AB_GMF_SRFULL_LBN 21
+#define	FRF_AB_GMF_SRFULL_WIDTH 1
+#define	FRF_AB_GMF_HSTSRFULLCLR_LBN 20
+#define	FRF_AB_GMF_HSTSRFULLCLR_WIDTH 1
+#define	FRF_AB_GMF_CFGBYTMODE_LBN 19
+#define	FRF_AB_GMF_CFGBYTMODE_WIDTH 1
+#define	FRF_AB_GMF_HSTDRPLT64_LBN 18
+#define	FRF_AB_GMF_HSTDRPLT64_WIDTH 1
+#define	FRF_AB_GMF_HSTFLTRFRMDC_LBN 0
+#define	FRF_AB_GMF_HSTFLTRFRMDC_WIDTH 18
+
+/* TX_SRC_MAC_TBL: Transmit IP source address filter table */
+#define	FR_BB_TX_SRC_MAC_TBL 0x00001000
+#define	FR_BB_TX_SRC_MAC_TBL_STEP 16
+#define	FR_BB_TX_SRC_MAC_TBL_ROWS 16
+#define	FRF_BB_TX_SRC_MAC_ADR_1_LBN 64
+#define	FRF_BB_TX_SRC_MAC_ADR_1_WIDTH 48
+#define	FRF_BB_TX_SRC_MAC_ADR_0_LBN 0
+#define	FRF_BB_TX_SRC_MAC_ADR_0_WIDTH 48
+
+/* TX_SRC_MAC_CTL_REG: Transmit MAC source address filter control */
+#define	FR_BB_TX_SRC_MAC_CTL 0x00001100
+#define	FRF_BB_TX_SRC_DROP_CTR_LBN 16
+#define	FRF_BB_TX_SRC_DROP_CTR_WIDTH 16
+#define	FRF_BB_TX_SRC_FLTR_EN_LBN 15
+#define	FRF_BB_TX_SRC_FLTR_EN_WIDTH 1
+#define	FRF_BB_TX_DROP_CTR_CLR_LBN 12
+#define	FRF_BB_TX_DROP_CTR_CLR_WIDTH 1
+#define	FRF_BB_TX_MAC_QID_SEL_LBN 0
+#define	FRF_BB_TX_MAC_QID_SEL_WIDTH 3
+
+/* XM_ADR_LO_REG: XGMAC address register low */
+#define	FR_AB_XM_ADR_LO 0x00001200
+#define	FRF_AB_XM_ADR_LO_LBN 0
+#define	FRF_AB_XM_ADR_LO_WIDTH 32
+
+/* XM_ADR_HI_REG: XGMAC address register high */
+#define	FR_AB_XM_ADR_HI 0x00001210
+#define	FRF_AB_XM_ADR_HI_LBN 0
+#define	FRF_AB_XM_ADR_HI_WIDTH 16
+
+/* XM_GLB_CFG_REG: XGMAC global configuration */
+#define	FR_AB_XM_GLB_CFG 0x00001220
+#define	FRF_AB_XM_RMTFLT_GEN_LBN 17
+#define	FRF_AB_XM_RMTFLT_GEN_WIDTH 1
+#define	FRF_AB_XM_DEBUG_MODE_LBN 16
+#define	FRF_AB_XM_DEBUG_MODE_WIDTH 1
+#define	FRF_AB_XM_RX_STAT_EN_LBN 11
+#define	FRF_AB_XM_RX_STAT_EN_WIDTH 1
+#define	FRF_AB_XM_TX_STAT_EN_LBN 10
+#define	FRF_AB_XM_TX_STAT_EN_WIDTH 1
+#define	FRF_AB_XM_RX_JUMBO_MODE_LBN 6
+#define	FRF_AB_XM_RX_JUMBO_MODE_WIDTH 1
+#define	FRF_AB_XM_WAN_MODE_LBN 5
+#define	FRF_AB_XM_WAN_MODE_WIDTH 1
+#define	FRF_AB_XM_INTCLR_MODE_LBN 3
+#define	FRF_AB_XM_INTCLR_MODE_WIDTH 1
+#define	FRF_AB_XM_CORE_RST_LBN 0
+#define	FRF_AB_XM_CORE_RST_WIDTH 1
+
+/* XM_TX_CFG_REG: XGMAC transmit configuration */
+#define	FR_AB_XM_TX_CFG 0x00001230
+#define	FRF_AB_XM_TX_PROG_LBN 24
+#define	FRF_AB_XM_TX_PROG_WIDTH 1
+#define	FRF_AB_XM_IPG_LBN 16
+#define	FRF_AB_XM_IPG_WIDTH 4
+#define	FRF_AB_XM_FCNTL_LBN 10
+#define	FRF_AB_XM_FCNTL_WIDTH 1
+#define	FRF_AB_XM_TXCRC_LBN 8
+#define	FRF_AB_XM_TXCRC_WIDTH 1
+#define	FRF_AB_XM_EDRC_LBN 6
+#define	FRF_AB_XM_EDRC_WIDTH 1
+#define	FRF_AB_XM_AUTO_PAD_LBN 5
+#define	FRF_AB_XM_AUTO_PAD_WIDTH 1
+#define	FRF_AB_XM_TX_PRMBL_LBN 2
+#define	FRF_AB_XM_TX_PRMBL_WIDTH 1
+#define	FRF_AB_XM_TXEN_LBN 1
+#define	FRF_AB_XM_TXEN_WIDTH 1
+#define	FRF_AB_XM_TX_RST_LBN 0
+#define	FRF_AB_XM_TX_RST_WIDTH 1
+
+/* XM_RX_CFG_REG: XGMAC receive configuration */
+#define	FR_AB_XM_RX_CFG 0x00001240
+#define	FRF_AB_XM_PASS_LENERR_LBN 26
+#define	FRF_AB_XM_PASS_LENERR_WIDTH 1
+#define	FRF_AB_XM_PASS_CRC_ERR_LBN 25
+#define	FRF_AB_XM_PASS_CRC_ERR_WIDTH 1
+#define	FRF_AB_XM_PASS_PRMBLE_ERR_LBN 24
+#define	FRF_AB_XM_PASS_PRMBLE_ERR_WIDTH 1
+#define	FRF_AB_XM_REJ_BCAST_LBN 20
+#define	FRF_AB_XM_REJ_BCAST_WIDTH 1
+#define	FRF_AB_XM_ACPT_ALL_MCAST_LBN 11
+#define	FRF_AB_XM_ACPT_ALL_MCAST_WIDTH 1
+#define	FRF_AB_XM_ACPT_ALL_UCAST_LBN 9
+#define	FRF_AB_XM_ACPT_ALL_UCAST_WIDTH 1
+#define	FRF_AB_XM_AUTO_DEPAD_LBN 8
+#define	FRF_AB_XM_AUTO_DEPAD_WIDTH 1
+#define	FRF_AB_XM_RXCRC_LBN 3
+#define	FRF_AB_XM_RXCRC_WIDTH 1
+#define	FRF_AB_XM_RX_PRMBL_LBN 2
+#define	FRF_AB_XM_RX_PRMBL_WIDTH 1
+#define	FRF_AB_XM_RXEN_LBN 1
+#define	FRF_AB_XM_RXEN_WIDTH 1
+#define	FRF_AB_XM_RX_RST_LBN 0
+#define	FRF_AB_XM_RX_RST_WIDTH 1
+
+/* XM_MGT_INT_MASK: documentation to be written for sum_XM_MGT_INT_MASK */
+#define	FR_AB_XM_MGT_INT_MASK 0x00001250
+#define	FRF_AB_XM_MSK_STA_INTR_LBN 16
+#define	FRF_AB_XM_MSK_STA_INTR_WIDTH 1
+#define	FRF_AB_XM_MSK_STAT_CNTR_HF_LBN 9
+#define	FRF_AB_XM_MSK_STAT_CNTR_HF_WIDTH 1
+#define	FRF_AB_XM_MSK_STAT_CNTR_OF_LBN 8
+#define	FRF_AB_XM_MSK_STAT_CNTR_OF_WIDTH 1
+#define	FRF_AB_XM_MSK_PRMBLE_ERR_LBN 2
+#define	FRF_AB_XM_MSK_PRMBLE_ERR_WIDTH 1
+#define	FRF_AB_XM_MSK_RMTFLT_LBN 1
+#define	FRF_AB_XM_MSK_RMTFLT_WIDTH 1
+#define	FRF_AB_XM_MSK_LCLFLT_LBN 0
+#define	FRF_AB_XM_MSK_LCLFLT_WIDTH 1
+
+/* XM_FC_REG: XGMAC flow control register */
+#define	FR_AB_XM_FC 0x00001270
+#define	FRF_AB_XM_PAUSE_TIME_LBN 16
+#define	FRF_AB_XM_PAUSE_TIME_WIDTH 16
+#define	FRF_AB_XM_RX_MAC_STAT_LBN 11
+#define	FRF_AB_XM_RX_MAC_STAT_WIDTH 1
+#define	FRF_AB_XM_TX_MAC_STAT_LBN 10
+#define	FRF_AB_XM_TX_MAC_STAT_WIDTH 1
+#define	FRF_AB_XM_MCNTL_PASS_LBN 8
+#define	FRF_AB_XM_MCNTL_PASS_WIDTH 2
+#define	FRF_AB_XM_REJ_CNTL_UCAST_LBN 6
+#define	FRF_AB_XM_REJ_CNTL_UCAST_WIDTH 1
+#define	FRF_AB_XM_REJ_CNTL_MCAST_LBN 5
+#define	FRF_AB_XM_REJ_CNTL_MCAST_WIDTH 1
+#define	FRF_AB_XM_ZPAUSE_LBN 2
+#define	FRF_AB_XM_ZPAUSE_WIDTH 1
+#define	FRF_AB_XM_XMIT_PAUSE_LBN 1
+#define	FRF_AB_XM_XMIT_PAUSE_WIDTH 1
+#define	FRF_AB_XM_DIS_FCNTL_LBN 0
+#define	FRF_AB_XM_DIS_FCNTL_WIDTH 1
+
+/* XM_PAUSE_TIME_REG: XGMAC pause time register */
+#define	FR_AB_XM_PAUSE_TIME 0x00001290
+#define	FRF_AB_XM_TX_PAUSE_CNT_LBN 16
+#define	FRF_AB_XM_TX_PAUSE_CNT_WIDTH 16
+#define	FRF_AB_XM_RX_PAUSE_CNT_LBN 0
+#define	FRF_AB_XM_RX_PAUSE_CNT_WIDTH 16
+
+/* XM_TX_PARAM_REG: XGMAC transmit parameter register */
+#define	FR_AB_XM_TX_PARAM 0x000012d0
+#define	FRF_AB_XM_TX_JUMBO_MODE_LBN 31
+#define	FRF_AB_XM_TX_JUMBO_MODE_WIDTH 1
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_HI_LBN 19
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_HI_WIDTH 11
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_LO_LBN 16
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_LO_WIDTH 3
+#define	FRF_AB_XM_PAD_CHAR_LBN 0
+#define	FRF_AB_XM_PAD_CHAR_WIDTH 8
+
+/* XM_RX_PARAM_REG: XGMAC receive parameter register */
+#define	FR_AB_XM_RX_PARAM 0x000012e0
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_HI_LBN 3
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_HI_WIDTH 11
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_LO_LBN 0
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_LO_WIDTH 3
+
+/* XM_MGT_INT_MSK_REG: XGMAC management interrupt mask register */
+#define	FR_AB_XM_MGT_INT_MSK 0x000012f0
+#define	FRF_AB_XM_STAT_CNTR_OF_LBN 9
+#define	FRF_AB_XM_STAT_CNTR_OF_WIDTH 1
+#define	FRF_AB_XM_STAT_CNTR_HF_LBN 8
+#define	FRF_AB_XM_STAT_CNTR_HF_WIDTH 1
+#define	FRF_AB_XM_PRMBLE_ERR_LBN 2
+#define	FRF_AB_XM_PRMBLE_ERR_WIDTH 1
+#define	FRF_AB_XM_RMTFLT_LBN 1
+#define	FRF_AB_XM_RMTFLT_WIDTH 1
+#define	FRF_AB_XM_LCLFLT_LBN 0
+#define	FRF_AB_XM_LCLFLT_WIDTH 1
+
+/* XX_PWR_RST_REG: XGXS/XAUI powerdown/reset register */
+#define	FR_AB_XX_PWR_RST 0x00001300
+#define	FRF_AB_XX_PWRDND_SIG_LBN 31
+#define	FRF_AB_XX_PWRDND_SIG_WIDTH 1
+#define	FRF_AB_XX_PWRDNC_SIG_LBN 30
+#define	FRF_AB_XX_PWRDNC_SIG_WIDTH 1
+#define	FRF_AB_XX_PWRDNB_SIG_LBN 29
+#define	FRF_AB_XX_PWRDNB_SIG_WIDTH 1
+#define	FRF_AB_XX_PWRDNA_SIG_LBN 28
+#define	FRF_AB_XX_PWRDNA_SIG_WIDTH 1
+#define	FRF_AB_XX_SIM_MODE_LBN 27
+#define	FRF_AB_XX_SIM_MODE_WIDTH 1
+#define	FRF_AB_XX_RSTPLLCD_SIG_LBN 25
+#define	FRF_AB_XX_RSTPLLCD_SIG_WIDTH 1
+#define	FRF_AB_XX_RSTPLLAB_SIG_LBN 24
+#define	FRF_AB_XX_RSTPLLAB_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETD_SIG_LBN 23
+#define	FRF_AB_XX_RESETD_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETC_SIG_LBN 22
+#define	FRF_AB_XX_RESETC_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETB_SIG_LBN 21
+#define	FRF_AB_XX_RESETB_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETA_SIG_LBN 20
+#define	FRF_AB_XX_RESETA_SIG_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSRX_SIG_LBN 18
+#define	FRF_AB_XX_RSTXGXSRX_SIG_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSTX_SIG_LBN 17
+#define	FRF_AB_XX_RSTXGXSTX_SIG_WIDTH 1
+#define	FRF_AB_XX_SD_RST_ACT_LBN 16
+#define	FRF_AB_XX_SD_RST_ACT_WIDTH 1
+#define	FRF_AB_XX_PWRDND_EN_LBN 15
+#define	FRF_AB_XX_PWRDND_EN_WIDTH 1
+#define	FRF_AB_XX_PWRDNC_EN_LBN 14
+#define	FRF_AB_XX_PWRDNC_EN_WIDTH 1
+#define	FRF_AB_XX_PWRDNB_EN_LBN 13
+#define	FRF_AB_XX_PWRDNB_EN_WIDTH 1
+#define	FRF_AB_XX_PWRDNA_EN_LBN 12
+#define	FRF_AB_XX_PWRDNA_EN_WIDTH 1
+#define	FRF_AB_XX_RSTPLLCD_EN_LBN 9
+#define	FRF_AB_XX_RSTPLLCD_EN_WIDTH 1
+#define	FRF_AB_XX_RSTPLLAB_EN_LBN 8
+#define	FRF_AB_XX_RSTPLLAB_EN_WIDTH 1
+#define	FRF_AB_XX_RESETD_EN_LBN 7
+#define	FRF_AB_XX_RESETD_EN_WIDTH 1
+#define	FRF_AB_XX_RESETC_EN_LBN 6
+#define	FRF_AB_XX_RESETC_EN_WIDTH 1
+#define	FRF_AB_XX_RESETB_EN_LBN 5
+#define	FRF_AB_XX_RESETB_EN_WIDTH 1
+#define	FRF_AB_XX_RESETA_EN_LBN 4
+#define	FRF_AB_XX_RESETA_EN_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSRX_EN_LBN 2
+#define	FRF_AB_XX_RSTXGXSRX_EN_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSTX_EN_LBN 1
+#define	FRF_AB_XX_RSTXGXSTX_EN_WIDTH 1
+#define	FRF_AB_XX_RST_XX_EN_LBN 0
+#define	FRF_AB_XX_RST_XX_EN_WIDTH 1
+
+/* XX_SD_CTL_REG: XGXS/XAUI powerdown/reset control register */
+#define	FR_AB_XX_SD_CTL 0x00001310
+#define	FRF_AB_XX_TERMADJ1_LBN 17
+#define	FRF_AB_XX_TERMADJ1_WIDTH 1
+#define	FRF_AB_XX_TERMADJ0_LBN 16
+#define	FRF_AB_XX_TERMADJ0_WIDTH 1
+#define	FRF_AB_XX_HIDRVD_LBN 15
+#define	FRF_AB_XX_HIDRVD_WIDTH 1
+#define	FRF_AB_XX_LODRVD_LBN 14
+#define	FRF_AB_XX_LODRVD_WIDTH 1
+#define	FRF_AB_XX_HIDRVC_LBN 13
+#define	FRF_AB_XX_HIDRVC_WIDTH 1
+#define	FRF_AB_XX_LODRVC_LBN 12
+#define	FRF_AB_XX_LODRVC_WIDTH 1
+#define	FRF_AB_XX_HIDRVB_LBN 11
+#define	FRF_AB_XX_HIDRVB_WIDTH 1
+#define	FRF_AB_XX_LODRVB_LBN 10
+#define	FRF_AB_XX_LODRVB_WIDTH 1
+#define	FRF_AB_XX_HIDRVA_LBN 9
+#define	FRF_AB_XX_HIDRVA_WIDTH 1
+#define	FRF_AB_XX_LODRVA_LBN 8
+#define	FRF_AB_XX_LODRVA_WIDTH 1
+#define	FRF_AB_XX_LPBKD_LBN 3
+#define	FRF_AB_XX_LPBKD_WIDTH 1
+#define	FRF_AB_XX_LPBKC_LBN 2
+#define	FRF_AB_XX_LPBKC_WIDTH 1
+#define	FRF_AB_XX_LPBKB_LBN 1
+#define	FRF_AB_XX_LPBKB_WIDTH 1
+#define	FRF_AB_XX_LPBKA_LBN 0
+#define	FRF_AB_XX_LPBKA_WIDTH 1
+
+/* XX_TXDRV_CTL_REG: XAUI SerDes transmit drive control register */
+#define	FR_AB_XX_TXDRV_CTL 0x00001320
+#define	FRF_AB_XX_DEQD_LBN 28
+#define	FRF_AB_XX_DEQD_WIDTH 4
+#define	FRF_AB_XX_DEQC_LBN 24
+#define	FRF_AB_XX_DEQC_WIDTH 4
+#define	FRF_AB_XX_DEQB_LBN 20
+#define	FRF_AB_XX_DEQB_WIDTH 4
+#define	FRF_AB_XX_DEQA_LBN 16
+#define	FRF_AB_XX_DEQA_WIDTH 4
+#define	FRF_AB_XX_DTXD_LBN 12
+#define	FRF_AB_XX_DTXD_WIDTH 4
+#define	FRF_AB_XX_DTXC_LBN 8
+#define	FRF_AB_XX_DTXC_WIDTH 4
+#define	FRF_AB_XX_DTXB_LBN 4
+#define	FRF_AB_XX_DTXB_WIDTH 4
+#define	FRF_AB_XX_DTXA_LBN 0
+#define	FRF_AB_XX_DTXA_WIDTH 4
+
+/* XX_PRBS_CTL_REG: documentation to be written for sum_XX_PRBS_CTL_REG */
+#define	FR_AB_XX_PRBS_CTL 0x00001330
+#define	FRF_AB_XX_CH3_RX_PRBS_SEL_LBN 30
+#define	FRF_AB_XX_CH3_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH3_RX_PRBS_INV_LBN 29
+#define	FRF_AB_XX_CH3_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH3_RX_PRBS_CHKEN_LBN 28
+#define	FRF_AB_XX_CH3_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH2_RX_PRBS_SEL_LBN 26
+#define	FRF_AB_XX_CH2_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH2_RX_PRBS_INV_LBN 25
+#define	FRF_AB_XX_CH2_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH2_RX_PRBS_CHKEN_LBN 24
+#define	FRF_AB_XX_CH2_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH1_RX_PRBS_SEL_LBN 22
+#define	FRF_AB_XX_CH1_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH1_RX_PRBS_INV_LBN 21
+#define	FRF_AB_XX_CH1_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH1_RX_PRBS_CHKEN_LBN 20
+#define	FRF_AB_XX_CH1_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH0_RX_PRBS_SEL_LBN 18
+#define	FRF_AB_XX_CH0_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH0_RX_PRBS_INV_LBN 17
+#define	FRF_AB_XX_CH0_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH0_RX_PRBS_CHKEN_LBN 16
+#define	FRF_AB_XX_CH0_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH3_TX_PRBS_SEL_LBN 14
+#define	FRF_AB_XX_CH3_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH3_TX_PRBS_INV_LBN 13
+#define	FRF_AB_XX_CH3_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH3_TX_PRBS_CHKEN_LBN 12
+#define	FRF_AB_XX_CH3_TX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH2_TX_PRBS_SEL_LBN 10
+#define	FRF_AB_XX_CH2_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH2_TX_PRBS_INV_LBN 9
+#define	FRF_AB_XX_CH2_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH2_TX_PRBS_CHKEN_LBN 8
+#define	FRF_AB_XX_CH2_TX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH1_TX_PRBS_SEL_LBN 6
+#define	FRF_AB_XX_CH1_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH1_TX_PRBS_INV_LBN 5
+#define	FRF_AB_XX_CH1_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH1_TX_PRBS_CHKEN_LBN 4
+#define	FRF_AB_XX_CH1_TX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH0_TX_PRBS_SEL_LBN 2
+#define	FRF_AB_XX_CH0_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH0_TX_PRBS_INV_LBN 1
+#define	FRF_AB_XX_CH0_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH0_TX_PRBS_CHKEN_LBN 0
+#define	FRF_AB_XX_CH0_TX_PRBS_CHKEN_WIDTH 1
+
+/* XX_PRBS_CHK_REG: documentation to be written for sum_XX_PRBS_CHK_REG */
+#define	FR_AB_XX_PRBS_CHK 0x00001340
+#define	FRF_AB_XX_REV_LB_EN_LBN 16
+#define	FRF_AB_XX_REV_LB_EN_WIDTH 1
+#define	FRF_AB_XX_CH3_DEG_DET_LBN 15
+#define	FRF_AB_XX_CH3_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH3_LFSR_LOCK_IND_LBN 14
+#define	FRF_AB_XX_CH3_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH3_PRBS_FRUN_LBN 13
+#define	FRF_AB_XX_CH3_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH3_ERR_CHK_LBN 12
+#define	FRF_AB_XX_CH3_ERR_CHK_WIDTH 1
+#define	FRF_AB_XX_CH2_DEG_DET_LBN 11
+#define	FRF_AB_XX_CH2_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH2_LFSR_LOCK_IND_LBN 10
+#define	FRF_AB_XX_CH2_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH2_PRBS_FRUN_LBN 9
+#define	FRF_AB_XX_CH2_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH2_ERR_CHK_LBN 8
+#define	FRF_AB_XX_CH2_ERR_CHK_WIDTH 1
+#define	FRF_AB_XX_CH1_DEG_DET_LBN 7
+#define	FRF_AB_XX_CH1_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH1_LFSR_LOCK_IND_LBN 6
+#define	FRF_AB_XX_CH1_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH1_PRBS_FRUN_LBN 5
+#define	FRF_AB_XX_CH1_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH1_ERR_CHK_LBN 4
+#define	FRF_AB_XX_CH1_ERR_CHK_WIDTH 1
+#define	FRF_AB_XX_CH0_DEG_DET_LBN 3
+#define	FRF_AB_XX_CH0_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH0_LFSR_LOCK_IND_LBN 2
+#define	FRF_AB_XX_CH0_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH0_PRBS_FRUN_LBN 1
+#define	FRF_AB_XX_CH0_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH0_ERR_CHK_LBN 0
+#define	FRF_AB_XX_CH0_ERR_CHK_WIDTH 1
+
+/* XX_PRBS_ERR_REG: documentation to be written for sum_XX_PRBS_ERR_REG */
+#define	FR_AB_XX_PRBS_ERR 0x00001350
+#define	FRF_AB_XX_CH3_PRBS_ERR_CNT_LBN 24
+#define	FRF_AB_XX_CH3_PRBS_ERR_CNT_WIDTH 8
+#define	FRF_AB_XX_CH2_PRBS_ERR_CNT_LBN 16
+#define	FRF_AB_XX_CH2_PRBS_ERR_CNT_WIDTH 8
+#define	FRF_AB_XX_CH1_PRBS_ERR_CNT_LBN 8
+#define	FRF_AB_XX_CH1_PRBS_ERR_CNT_WIDTH 8
+#define	FRF_AB_XX_CH0_PRBS_ERR_CNT_LBN 0
+#define	FRF_AB_XX_CH0_PRBS_ERR_CNT_WIDTH 8
+
+/* XX_CORE_STAT_REG: XAUI XGXS core status register */
+#define	FR_AB_XX_CORE_STAT 0x00001360
+#define	FRF_AB_XX_FORCE_SIG3_LBN 31
+#define	FRF_AB_XX_FORCE_SIG3_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG3_VAL_LBN 30
+#define	FRF_AB_XX_FORCE_SIG3_VAL_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG2_LBN 29
+#define	FRF_AB_XX_FORCE_SIG2_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG2_VAL_LBN 28
+#define	FRF_AB_XX_FORCE_SIG2_VAL_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG1_LBN 27
+#define	FRF_AB_XX_FORCE_SIG1_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG1_VAL_LBN 26
+#define	FRF_AB_XX_FORCE_SIG1_VAL_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG0_LBN 25
+#define	FRF_AB_XX_FORCE_SIG0_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG0_VAL_LBN 24
+#define	FRF_AB_XX_FORCE_SIG0_VAL_WIDTH 1
+#define	FRF_AB_XX_XGXS_LB_EN_LBN 23
+#define	FRF_AB_XX_XGXS_LB_EN_WIDTH 1
+#define	FRF_AB_XX_XGMII_LB_EN_LBN 22
+#define	FRF_AB_XX_XGMII_LB_EN_WIDTH 1
+#define	FRF_AB_XX_MATCH_FAULT_LBN 21
+#define	FRF_AB_XX_MATCH_FAULT_WIDTH 1
+#define	FRF_AB_XX_ALIGN_DONE_LBN 20
+#define	FRF_AB_XX_ALIGN_DONE_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT3_LBN 19
+#define	FRF_AB_XX_SYNC_STAT3_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT2_LBN 18
+#define	FRF_AB_XX_SYNC_STAT2_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT1_LBN 17
+#define	FRF_AB_XX_SYNC_STAT1_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT0_LBN 16
+#define	FRF_AB_XX_SYNC_STAT0_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH3_LBN 15
+#define	FRF_AB_XX_COMMA_DET_CH3_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH2_LBN 14
+#define	FRF_AB_XX_COMMA_DET_CH2_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH1_LBN 13
+#define	FRF_AB_XX_COMMA_DET_CH1_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH0_LBN 12
+#define	FRF_AB_XX_COMMA_DET_CH0_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH3_LBN 11
+#define	FRF_AB_XX_CGRP_ALIGN_CH3_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH2_LBN 10
+#define	FRF_AB_XX_CGRP_ALIGN_CH2_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH1_LBN 9
+#define	FRF_AB_XX_CGRP_ALIGN_CH1_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH0_LBN 8
+#define	FRF_AB_XX_CGRP_ALIGN_CH0_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH3_LBN 7
+#define	FRF_AB_XX_CHAR_ERR_CH3_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH2_LBN 6
+#define	FRF_AB_XX_CHAR_ERR_CH2_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH1_LBN 5
+#define	FRF_AB_XX_CHAR_ERR_CH1_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH0_LBN 4
+#define	FRF_AB_XX_CHAR_ERR_CH0_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH3_LBN 3
+#define	FRF_AB_XX_DISPERR_CH3_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH2_LBN 2
+#define	FRF_AB_XX_DISPERR_CH2_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH1_LBN 1
+#define	FRF_AB_XX_DISPERR_CH1_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH0_LBN 0
+#define	FRF_AB_XX_DISPERR_CH0_WIDTH 1
+
+/* RX_DESC_PTR_TBL_KER: Receive descriptor pointer table */
+#define	FR_AA_RX_DESC_PTR_TBL_KER 0x00011800
+#define	FR_AA_RX_DESC_PTR_TBL_KER_STEP 16
+#define	FR_AA_RX_DESC_PTR_TBL_KER_ROWS 4
+/* RX_DESC_PTR_TBL: Receive descriptor pointer table */
+#define	FR_BZ_RX_DESC_PTR_TBL 0x00f40000
+#define	FR_BZ_RX_DESC_PTR_TBL_STEP 16
+#define	FR_BB_RX_DESC_PTR_TBL_ROWS 4096
+#define	FR_CZ_RX_DESC_PTR_TBL_ROWS 1024
+#define	FRF_CZ_RX_HDR_SPLIT_LBN 90
+#define	FRF_CZ_RX_HDR_SPLIT_WIDTH 1
+#define	FRF_AA_RX_RESET_LBN 89
+#define	FRF_AA_RX_RESET_WIDTH 1
+#define	FRF_AZ_RX_ISCSI_DDIG_EN_LBN 88
+#define	FRF_AZ_RX_ISCSI_DDIG_EN_WIDTH 1
+#define	FRF_AZ_RX_ISCSI_HDIG_EN_LBN 87
+#define	FRF_AZ_RX_ISCSI_HDIG_EN_WIDTH 1
+#define	FRF_AZ_RX_DESC_PREF_ACT_LBN 86
+#define	FRF_AZ_RX_DESC_PREF_ACT_WIDTH 1
+#define	FRF_AZ_RX_DC_HW_RPTR_LBN 80
+#define	FRF_AZ_RX_DC_HW_RPTR_WIDTH 6
+#define	FRF_AZ_RX_DESCQ_HW_RPTR_LBN 68
+#define	FRF_AZ_RX_DESCQ_HW_RPTR_WIDTH 12
+#define	FRF_AZ_RX_DESCQ_SW_WPTR_LBN 56
+#define	FRF_AZ_RX_DESCQ_SW_WPTR_WIDTH 12
+#define	FRF_AZ_RX_DESCQ_BUF_BASE_ID_LBN 36
+#define	FRF_AZ_RX_DESCQ_BUF_BASE_ID_WIDTH 20
+#define	FRF_AZ_RX_DESCQ_EVQ_ID_LBN 24
+#define	FRF_AZ_RX_DESCQ_EVQ_ID_WIDTH 12
+#define	FRF_AZ_RX_DESCQ_OWNER_ID_LBN 10
+#define	FRF_AZ_RX_DESCQ_OWNER_ID_WIDTH 14
+#define	FRF_AZ_RX_DESCQ_LABEL_LBN 5
+#define	FRF_AZ_RX_DESCQ_LABEL_WIDTH 5
+#define	FRF_AZ_RX_DESCQ_SIZE_LBN 3
+#define	FRF_AZ_RX_DESCQ_SIZE_WIDTH 2
+#define	FFE_AZ_RX_DESCQ_SIZE_4K 3
+#define	FFE_AZ_RX_DESCQ_SIZE_2K 2
+#define	FFE_AZ_RX_DESCQ_SIZE_1K 1
+#define	FFE_AZ_RX_DESCQ_SIZE_512 0
+#define	FRF_AZ_RX_DESCQ_TYPE_LBN 2
+#define	FRF_AZ_RX_DESCQ_TYPE_WIDTH 1
+#define	FRF_AZ_RX_DESCQ_JUMBO_LBN 1
+#define	FRF_AZ_RX_DESCQ_JUMBO_WIDTH 1
+#define	FRF_AZ_RX_DESCQ_EN_LBN 0
+#define	FRF_AZ_RX_DESCQ_EN_WIDTH 1
+
+/* TX_DESC_PTR_TBL_KER: Transmit descriptor pointer */
+#define	FR_AA_TX_DESC_PTR_TBL_KER 0x00011900
+#define	FR_AA_TX_DESC_PTR_TBL_KER_STEP 16
+#define	FR_AA_TX_DESC_PTR_TBL_KER_ROWS 8
+/* TX_DESC_PTR_TBL: Transmit descriptor pointer */
+#define	FR_BZ_TX_DESC_PTR_TBL 0x00f50000
+#define	FR_BZ_TX_DESC_PTR_TBL_STEP 16
+#define	FR_BB_TX_DESC_PTR_TBL_ROWS 4096
+#define	FR_CZ_TX_DESC_PTR_TBL_ROWS 1024
+#define	FRF_CZ_TX_DPT_Q_MASK_WIDTH_LBN 94
+#define	FRF_CZ_TX_DPT_Q_MASK_WIDTH_WIDTH 2
+#define	FRF_CZ_TX_DPT_ETH_FILT_EN_LBN 93
+#define	FRF_CZ_TX_DPT_ETH_FILT_EN_WIDTH 1
+#define	FRF_CZ_TX_DPT_IP_FILT_EN_LBN 92
+#define	FRF_CZ_TX_DPT_IP_FILT_EN_WIDTH 1
+#define	FRF_BZ_TX_NON_IP_DROP_DIS_LBN 91
+#define	FRF_BZ_TX_NON_IP_DROP_DIS_WIDTH 1
+#define	FRF_BZ_TX_IP_CHKSM_DIS_LBN 90
+#define	FRF_BZ_TX_IP_CHKSM_DIS_WIDTH 1
+#define	FRF_BZ_TX_TCP_CHKSM_DIS_LBN 89
+#define	FRF_BZ_TX_TCP_CHKSM_DIS_WIDTH 1
+#define	FRF_AZ_TX_DESCQ_EN_LBN 88
+#define	FRF_AZ_TX_DESCQ_EN_WIDTH 1
+#define	FRF_AZ_TX_ISCSI_DDIG_EN_LBN 87
+#define	FRF_AZ_TX_ISCSI_DDIG_EN_WIDTH 1
+#define	FRF_AZ_TX_ISCSI_HDIG_EN_LBN 86
+#define	FRF_AZ_TX_ISCSI_HDIG_EN_WIDTH 1
+#define	FRF_AZ_TX_DC_HW_RPTR_LBN 80
+#define	FRF_AZ_TX_DC_HW_RPTR_WIDTH 6
+#define	FRF_AZ_TX_DESCQ_HW_RPTR_LBN 68
+#define	FRF_AZ_TX_DESCQ_HW_RPTR_WIDTH 12
+#define	FRF_AZ_TX_DESCQ_SW_WPTR_LBN 56
+#define	FRF_AZ_TX_DESCQ_SW_WPTR_WIDTH 12
+#define	FRF_AZ_TX_DESCQ_BUF_BASE_ID_LBN 36
+#define	FRF_AZ_TX_DESCQ_BUF_BASE_ID_WIDTH 20
+#define	FRF_AZ_TX_DESCQ_EVQ_ID_LBN 24
+#define	FRF_AZ_TX_DESCQ_EVQ_ID_WIDTH 12
+#define	FRF_AZ_TX_DESCQ_OWNER_ID_LBN 10
+#define	FRF_AZ_TX_DESCQ_OWNER_ID_WIDTH 14
+#define	FRF_AZ_TX_DESCQ_LABEL_LBN 5
+#define	FRF_AZ_TX_DESCQ_LABEL_WIDTH 5
+#define	FRF_AZ_TX_DESCQ_SIZE_LBN 3
+#define	FRF_AZ_TX_DESCQ_SIZE_WIDTH 2
+#define	FFE_AZ_TX_DESCQ_SIZE_4K 3
+#define	FFE_AZ_TX_DESCQ_SIZE_2K 2
+#define	FFE_AZ_TX_DESCQ_SIZE_1K 1
+#define	FFE_AZ_TX_DESCQ_SIZE_512 0
+#define	FRF_AZ_TX_DESCQ_TYPE_LBN 1
+#define	FRF_AZ_TX_DESCQ_TYPE_WIDTH 2
+#define	FRF_AZ_TX_DESCQ_FLUSH_LBN 0
+#define	FRF_AZ_TX_DESCQ_FLUSH_WIDTH 1
+
+/* EVQ_PTR_TBL_KER: Event queue pointer table */
+#define	FR_AA_EVQ_PTR_TBL_KER 0x00011a00
+#define	FR_AA_EVQ_PTR_TBL_KER_STEP 16
+#define	FR_AA_EVQ_PTR_TBL_KER_ROWS 4
+/* EVQ_PTR_TBL: Event queue pointer table */
+#define	FR_BZ_EVQ_PTR_TBL 0x00f60000
+#define	FR_BZ_EVQ_PTR_TBL_STEP 16
+#define	FR_CZ_EVQ_PTR_TBL_ROWS 1024
+#define	FR_BB_EVQ_PTR_TBL_ROWS 4096
+#define	FRF_BZ_EVQ_RPTR_IGN_LBN 40
+#define	FRF_BZ_EVQ_RPTR_IGN_WIDTH 1
+#define	FRF_AB_EVQ_WKUP_OR_INT_EN_LBN 39
+#define	FRF_AB_EVQ_WKUP_OR_INT_EN_WIDTH 1
+#define	FRF_CZ_EVQ_DOS_PROTECT_EN_LBN 39
+#define	FRF_CZ_EVQ_DOS_PROTECT_EN_WIDTH 1
+#define	FRF_AZ_EVQ_NXT_WPTR_LBN 24
+#define	FRF_AZ_EVQ_NXT_WPTR_WIDTH 15
+#define	FRF_AZ_EVQ_EN_LBN 23
+#define	FRF_AZ_EVQ_EN_WIDTH 1
+#define	FRF_AZ_EVQ_SIZE_LBN 20
+#define	FRF_AZ_EVQ_SIZE_WIDTH 3
+#define	FFE_AZ_EVQ_SIZE_32K 6
+#define	FFE_AZ_EVQ_SIZE_16K 5
+#define	FFE_AZ_EVQ_SIZE_8K 4
+#define	FFE_AZ_EVQ_SIZE_4K 3
+#define	FFE_AZ_EVQ_SIZE_2K 2
+#define	FFE_AZ_EVQ_SIZE_1K 1
+#define	FFE_AZ_EVQ_SIZE_512 0
+#define	FRF_AZ_EVQ_BUF_BASE_ID_LBN 0
+#define	FRF_AZ_EVQ_BUF_BASE_ID_WIDTH 20
+
+/* BUF_HALF_TBL_KER: Buffer table in half buffer table mode direct access by driver */
+#define	FR_AA_BUF_HALF_TBL_KER 0x00018000
+#define	FR_AA_BUF_HALF_TBL_KER_STEP 8
+#define	FR_AA_BUF_HALF_TBL_KER_ROWS 4096
+/* BUF_HALF_TBL: Buffer table in half buffer table mode direct access by driver */
+#define	FR_BZ_BUF_HALF_TBL 0x00800000
+#define	FR_BZ_BUF_HALF_TBL_STEP 8
+#define	FR_CZ_BUF_HALF_TBL_ROWS 147456
+#define	FR_BB_BUF_HALF_TBL_ROWS 524288
+#define	FRF_AZ_BUF_ADR_HBUF_ODD_LBN 44
+#define	FRF_AZ_BUF_ADR_HBUF_ODD_WIDTH 20
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_ODD_LBN 32
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_ODD_WIDTH 12
+#define	FRF_AZ_BUF_ADR_HBUF_EVEN_LBN 12
+#define	FRF_AZ_BUF_ADR_HBUF_EVEN_WIDTH 20
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_EVEN_LBN 0
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_EVEN_WIDTH 12
+
+/* BUF_FULL_TBL_KER: Buffer table in full buffer table mode direct access by driver */
+#define	FR_AA_BUF_FULL_TBL_KER 0x00018000
+#define	FR_AA_BUF_FULL_TBL_KER_STEP 8
+#define	FR_AA_BUF_FULL_TBL_KER_ROWS 4096
+/* BUF_FULL_TBL: Buffer table in full buffer table mode direct access by driver */
+#define	FR_BZ_BUF_FULL_TBL 0x00800000
+#define	FR_BZ_BUF_FULL_TBL_STEP 8
+#define	FR_CZ_BUF_FULL_TBL_ROWS 147456
+#define	FR_BB_BUF_FULL_TBL_ROWS 917504
+#define	FRF_AZ_BUF_FULL_UNUSED_LBN 51
+#define	FRF_AZ_BUF_FULL_UNUSED_WIDTH 13
+#define	FRF_AZ_IP_DAT_BUF_SIZE_LBN 50
+#define	FRF_AZ_IP_DAT_BUF_SIZE_WIDTH 1
+#define	FRF_AZ_BUF_ADR_REGION_LBN 48
+#define	FRF_AZ_BUF_ADR_REGION_WIDTH 2
+#define	FFE_AZ_BUF_ADR_REGN3 3
+#define	FFE_AZ_BUF_ADR_REGN2 2
+#define	FFE_AZ_BUF_ADR_REGN1 1
+#define	FFE_AZ_BUF_ADR_REGN0 0
+#define	FRF_AZ_BUF_ADR_FBUF_LBN 14
+#define	FRF_AZ_BUF_ADR_FBUF_WIDTH 34
+#define	FRF_AZ_BUF_OWNER_ID_FBUF_LBN 0
+#define	FRF_AZ_BUF_OWNER_ID_FBUF_WIDTH 14
+
+/* RX_FILTER_TBL0: TCP/IPv4 Receive filter table */
+#define	FR_BZ_RX_FILTER_TBL0 0x00f00000
+#define	FR_BZ_RX_FILTER_TBL0_STEP 32
+#define	FR_BZ_RX_FILTER_TBL0_ROWS 8192
+/* RX_FILTER_TBL1: TCP/IPv4 Receive filter table */
+#define	FR_BB_RX_FILTER_TBL1 0x00f00010
+#define	FR_BB_RX_FILTER_TBL1_STEP 32
+#define	FR_BB_RX_FILTER_TBL1_ROWS 8192
+#define	FRF_BZ_RSS_EN_LBN 110
+#define	FRF_BZ_RSS_EN_WIDTH 1
+#define	FRF_BZ_SCATTER_EN_LBN 109
+#define	FRF_BZ_SCATTER_EN_WIDTH 1
+#define	FRF_BZ_TCP_UDP_LBN 108
+#define	FRF_BZ_TCP_UDP_WIDTH 1
+#define	FRF_BZ_RXQ_ID_LBN 96
+#define	FRF_BZ_RXQ_ID_WIDTH 12
+#define	FRF_BZ_DEST_IP_LBN 64
+#define	FRF_BZ_DEST_IP_WIDTH 32
+#define	FRF_BZ_DEST_PORT_TCP_LBN 48
+#define	FRF_BZ_DEST_PORT_TCP_WIDTH 16
+#define	FRF_BZ_SRC_IP_LBN 16
+#define	FRF_BZ_SRC_IP_WIDTH 32
+#define	FRF_BZ_SRC_TCP_DEST_UDP_LBN 0
+#define	FRF_BZ_SRC_TCP_DEST_UDP_WIDTH 16
+
+/* RX_MAC_FILTER_TBL0: Receive Ethernet filter table */
+#define	FR_CZ_RX_MAC_FILTER_TBL0 0x00f00010
+#define	FR_CZ_RX_MAC_FILTER_TBL0_STEP 32
+#define	FR_CZ_RX_MAC_FILTER_TBL0_ROWS 512
+#define	FRF_CZ_RMFT_RSS_EN_LBN 75
+#define	FRF_CZ_RMFT_RSS_EN_WIDTH 1
+#define	FRF_CZ_RMFT_SCATTER_EN_LBN 74
+#define	FRF_CZ_RMFT_SCATTER_EN_WIDTH 1
+#define	FRF_CZ_RMFT_IP_OVERRIDE_LBN 73
+#define	FRF_CZ_RMFT_IP_OVERRIDE_WIDTH 1
+#define	FRF_CZ_RMFT_RXQ_ID_LBN 61
+#define	FRF_CZ_RMFT_RXQ_ID_WIDTH 12
+#define	FRF_CZ_RMFT_WILDCARD_MATCH_LBN 60
+#define	FRF_CZ_RMFT_WILDCARD_MATCH_WIDTH 1
+#define	FRF_CZ_RMFT_DEST_MAC_LBN 16
+#define	FRF_CZ_RMFT_DEST_MAC_WIDTH 44
+#define	FRF_CZ_RMFT_VLAN_ID_LBN 0
+#define	FRF_CZ_RMFT_VLAN_ID_WIDTH 12
+
+/* TIMER_TBL: Timer table */
+#define	FR_BZ_TIMER_TBL 0x00f70000
+#define	FR_BZ_TIMER_TBL_STEP 16
+#define	FR_CZ_TIMER_TBL_ROWS 1024
+#define	FR_BB_TIMER_TBL_ROWS 4096
+#define	FRF_CZ_TIMER_Q_EN_LBN 33
+#define	FRF_CZ_TIMER_Q_EN_WIDTH 1
+#define	FRF_CZ_INT_ARMD_LBN 32
+#define	FRF_CZ_INT_ARMD_WIDTH 1
+#define	FRF_CZ_INT_PEND_LBN 31
+#define	FRF_CZ_INT_PEND_WIDTH 1
+#define	FRF_CZ_HOST_NOTIFY_MODE_LBN 30
+#define	FRF_CZ_HOST_NOTIFY_MODE_WIDTH 1
+#define	FRF_CZ_RELOAD_TIMER_VAL_LBN 16
+#define	FRF_CZ_RELOAD_TIMER_VAL_WIDTH 14
+#define	FRF_CZ_TIMER_MODE_LBN 14
+#define	FRF_CZ_TIMER_MODE_WIDTH 2
+#define	FFE_CZ_TIMER_MODE_INT_HLDOFF 3
+#define	FFE_CZ_TIMER_MODE_TRIG_START 2
+#define	FFE_CZ_TIMER_MODE_IMMED_START 1
+#define	FFE_CZ_TIMER_MODE_DIS 0
+#define	FRF_BB_TIMER_MODE_LBN 12
+#define	FRF_BB_TIMER_MODE_WIDTH 2
+#define	FFE_BB_TIMER_MODE_INT_HLDOFF 2
+#define	FFE_BB_TIMER_MODE_TRIG_START 2
+#define	FFE_BB_TIMER_MODE_IMMED_START 1
+#define	FFE_BB_TIMER_MODE_DIS 0
+#define	FRF_CZ_TIMER_VAL_LBN 0
+#define	FRF_CZ_TIMER_VAL_WIDTH 14
+#define	FRF_BB_TIMER_VAL_LBN 0
+#define	FRF_BB_TIMER_VAL_WIDTH 12
+
+/* TX_PACE_TBL: Transmit pacing table */
+#define	FR_BZ_TX_PACE_TBL 0x00f80000
+#define	FR_BZ_TX_PACE_TBL_STEP 16
+#define	FR_CZ_TX_PACE_TBL_ROWS 1024
+#define	FR_BB_TX_PACE_TBL_ROWS 4096
+#define	FRF_BZ_TX_PACE_LBN 0
+#define	FRF_BZ_TX_PACE_WIDTH 5
+
+/* RX_INDIRECTION_TBL: RX Indirection Table */
+#define	FR_BZ_RX_INDIRECTION_TBL 0x00fb0000
+#define	FR_BZ_RX_INDIRECTION_TBL_STEP 16
+#define	FR_BZ_RX_INDIRECTION_TBL_ROWS 128
+#define	FRF_BZ_IT_QUEUE_LBN 0
+#define	FRF_BZ_IT_QUEUE_WIDTH 6
+
+/* TX_FILTER_TBL0: TCP/IPv4 Transmit filter table */
+#define	FR_CZ_TX_FILTER_TBL0 0x00fc0000
+#define	FR_CZ_TX_FILTER_TBL0_STEP 16
+#define	FR_CZ_TX_FILTER_TBL0_ROWS 8192
+#define	FRF_CZ_TIFT_TCP_UDP_LBN 108
+#define	FRF_CZ_TIFT_TCP_UDP_WIDTH 1
+#define	FRF_CZ_TIFT_TXQ_ID_LBN 96
+#define	FRF_CZ_TIFT_TXQ_ID_WIDTH 12
+#define	FRF_CZ_TIFT_DEST_IP_LBN 64
+#define	FRF_CZ_TIFT_DEST_IP_WIDTH 32
+#define	FRF_CZ_TIFT_DEST_PORT_TCP_LBN 48
+#define	FRF_CZ_TIFT_DEST_PORT_TCP_WIDTH 16
+#define	FRF_CZ_TIFT_SRC_IP_LBN 16
+#define	FRF_CZ_TIFT_SRC_IP_WIDTH 32
+#define	FRF_CZ_TIFT_SRC_TCP_DEST_UDP_LBN 0
+#define	FRF_CZ_TIFT_SRC_TCP_DEST_UDP_WIDTH 16
+
+/* TX_MAC_FILTER_TBL0: Transmit Ethernet filter table */
+#define	FR_CZ_TX_MAC_FILTER_TBL0 0x00fe0000
+#define	FR_CZ_TX_MAC_FILTER_TBL0_STEP 16
+#define	FR_CZ_TX_MAC_FILTER_TBL0_ROWS 512
+#define	FRF_CZ_TMFT_TXQ_ID_LBN 61
+#define	FRF_CZ_TMFT_TXQ_ID_WIDTH 12
+#define	FRF_CZ_TMFT_WILDCARD_MATCH_LBN 60
+#define	FRF_CZ_TMFT_WILDCARD_MATCH_WIDTH 1
+#define	FRF_CZ_TMFT_SRC_MAC_LBN 16
+#define	FRF_CZ_TMFT_SRC_MAC_WIDTH 44
+#define	FRF_CZ_TMFT_VLAN_ID_LBN 0
+#define	FRF_CZ_TMFT_VLAN_ID_WIDTH 12
+
+/* MC_TREG_SMEM: MC Shared Memory */
+#define	FR_CZ_MC_TREG_SMEM 0x00ff0000
+#define	FR_CZ_MC_TREG_SMEM_STEP 4
+#define	FR_CZ_MC_TREG_SMEM_ROWS 512
+#define	FRF_CZ_MC_TREG_SMEM_ROW_LBN 0
+#define	FRF_CZ_MC_TREG_SMEM_ROW_WIDTH 32
+
+/* MSIX_VECTOR_TABLE: MSIX Vector Table */
+#define	FR_BB_MSIX_VECTOR_TABLE 0x00ff0000
+#define	FR_BZ_MSIX_VECTOR_TABLE_STEP 16
+#define	FR_BB_MSIX_VECTOR_TABLE_ROWS 64
+/* MSIX_VECTOR_TABLE: MSIX Vector Table */
+#define	FR_CZ_MSIX_VECTOR_TABLE 0x00000000
+/* FR_BZ_MSIX_VECTOR_TABLE_STEP 16 */
+#define	FR_CZ_MSIX_VECTOR_TABLE_ROWS 1024
+#define	FRF_BZ_MSIX_VECTOR_RESERVED_LBN 97
+#define	FRF_BZ_MSIX_VECTOR_RESERVED_WIDTH 31
+#define	FRF_BZ_MSIX_VECTOR_MASK_LBN 96
+#define	FRF_BZ_MSIX_VECTOR_MASK_WIDTH 1
+#define	FRF_BZ_MSIX_MESSAGE_DATA_LBN 64
+#define	FRF_BZ_MSIX_MESSAGE_DATA_WIDTH 32
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_HI_LBN 32
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_HI_WIDTH 32
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_LO_LBN 0
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_LO_WIDTH 32
+
+/* MSIX_PBA_TABLE: MSIX Pending Bit Array */
+#define	FR_BB_MSIX_PBA_TABLE 0x00ff2000
+#define	FR_BZ_MSIX_PBA_TABLE_STEP 4
+#define	FR_BB_MSIX_PBA_TABLE_ROWS 2
+/* MSIX_PBA_TABLE: MSIX Pending Bit Array */
+#define	FR_CZ_MSIX_PBA_TABLE 0x00008000
+/* FR_BZ_MSIX_PBA_TABLE_STEP 4 */
+#define	FR_CZ_MSIX_PBA_TABLE_ROWS 32
+#define	FRF_BZ_MSIX_PBA_PEND_DWORD_LBN 0
+#define	FRF_BZ_MSIX_PBA_PEND_DWORD_WIDTH 32
+
+/* SRM_DBG_REG: SRAM debug access */
+#define	FR_BZ_SRM_DBG 0x03000000
+#define	FR_BZ_SRM_DBG_STEP 8
+#define	FR_CZ_SRM_DBG_ROWS 262144
+#define	FR_BB_SRM_DBG_ROWS 2097152
+#define	FRF_BZ_SRM_DBG_LBN 0
+#define	FRF_BZ_SRM_DBG_WIDTH 64
+
+/* TB_MSIX_PBA_TABLE: MSIX Pending Bit Array */
+#define	FR_CZ_TB_MSIX_PBA_TABLE 0x00008000
+#define	FR_CZ_TB_MSIX_PBA_TABLE_STEP 4
+#define	FR_CZ_TB_MSIX_PBA_TABLE_ROWS 1024
+#define	FRF_CZ_TB_MSIX_PBA_PEND_DWORD_LBN 0
+#define	FRF_CZ_TB_MSIX_PBA_PEND_DWORD_WIDTH 32
+
+/* DRIVER_EV */
+#define	FSF_AZ_DRIVER_EV_SUBCODE_LBN 56
+#define	FSF_AZ_DRIVER_EV_SUBCODE_WIDTH 4
+#define	FSE_BZ_TX_DSC_ERROR_EV 15
+#define	FSE_BZ_RX_DSC_ERROR_EV 14
+#define	FSE_AA_RX_RECOVER_EV 11
+#define	FSE_AZ_TIMER_EV 10
+#define	FSE_AZ_TX_PKT_NON_TCP_UDP 9
+#define	FSE_AZ_WAKE_UP_EV 6
+#define	FSE_AZ_SRM_UPD_DONE_EV 5
+#define	FSE_AB_EVQ_NOT_EN_EV 3
+#define	FSE_AZ_EVQ_INIT_DONE_EV 2
+#define	FSE_AZ_RX_DESCQ_FLS_DONE_EV 1
+#define	FSE_AZ_TX_DESCQ_FLS_DONE_EV 0
+#define	FSF_AZ_DRIVER_EV_SUBDATA_LBN 0
+#define	FSF_AZ_DRIVER_EV_SUBDATA_WIDTH 14
+
+/* EVENT_ENTRY */
+#define	FSF_AZ_EV_CODE_LBN 60
+#define	FSF_AZ_EV_CODE_WIDTH 4
+#define	FSE_CZ_EV_CODE_MCDI_EV 12
+#define	FSE_CZ_EV_CODE_USER_EV 8
+#define	FSE_AZ_EV_CODE_DRV_GEN_EV 7
+#define	FSE_AZ_EV_CODE_GLOBAL_EV 6
+#define	FSE_AZ_EV_CODE_DRIVER_EV 5
+#define	FSE_AZ_EV_CODE_TX_EV 2
+#define	FSE_AZ_EV_CODE_RX_EV 0
+#define	FSF_AZ_EV_DATA_LBN 0
+#define	FSF_AZ_EV_DATA_WIDTH 60
+
+/* GLOBAL_EV */
+#define	FSF_BB_GLB_EV_RX_RECOVERY_LBN 12
+#define	FSF_BB_GLB_EV_RX_RECOVERY_WIDTH 1
+#define	FSF_AA_GLB_EV_RX_RECOVERY_LBN 11
+#define	FSF_AA_GLB_EV_RX_RECOVERY_WIDTH 1
+#define	FSF_BB_GLB_EV_XG_MGT_INTR_LBN 11
+#define	FSF_BB_GLB_EV_XG_MGT_INTR_WIDTH 1
+#define	FSF_AB_GLB_EV_XFP_PHY0_INTR_LBN 10
+#define	FSF_AB_GLB_EV_XFP_PHY0_INTR_WIDTH 1
+#define	FSF_AB_GLB_EV_XG_PHY0_INTR_LBN 9
+#define	FSF_AB_GLB_EV_XG_PHY0_INTR_WIDTH 1
+#define	FSF_AB_GLB_EV_G_PHY0_INTR_LBN 7
+#define	FSF_AB_GLB_EV_G_PHY0_INTR_WIDTH 1
+
+/* LEGACY_INT_VEC */
+#define	FSF_AZ_NET_IVEC_FATAL_INT_LBN 64
+#define	FSF_AZ_NET_IVEC_FATAL_INT_WIDTH 1
+#define	FSF_AZ_NET_IVEC_INT_Q_LBN 40
+#define	FSF_AZ_NET_IVEC_INT_Q_WIDTH 4
+#define	FSF_AZ_NET_IVEC_INT_FLAG_LBN 32
+#define	FSF_AZ_NET_IVEC_INT_FLAG_WIDTH 1
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_HF_LBN 1
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_HF_WIDTH 1
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_AF_LBN 0
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_AF_WIDTH 1
+
+/* MC_XGMAC_FLTR_RULE_DEF */
+#define	FSF_CZ_MC_XFRC_MODE_LBN 416
+#define	FSF_CZ_MC_XFRC_MODE_WIDTH 1
+#define	FSE_CZ_MC_XFRC_MODE_LAYERED 1
+#define	FSE_CZ_MC_XFRC_MODE_SIMPLE 0
+#define	FSF_CZ_MC_XFRC_HASH_LBN 384
+#define	FSF_CZ_MC_XFRC_HASH_WIDTH 32
+#define	FSF_CZ_MC_XFRC_LAYER4_BYTE_MASK_LBN 256
+#define	FSF_CZ_MC_XFRC_LAYER4_BYTE_MASK_WIDTH 128
+#define	FSF_CZ_MC_XFRC_LAYER3_BYTE_MASK_LBN 128
+#define	FSF_CZ_MC_XFRC_LAYER3_BYTE_MASK_WIDTH 128
+#define	FSF_CZ_MC_XFRC_LAYER2_OR_SIMPLE_BYTE_MASK_LBN 0
+#define	FSF_CZ_MC_XFRC_LAYER2_OR_SIMPLE_BYTE_MASK_WIDTH 128
+
+/* RX_EV */
+#define	FSF_CZ_RX_EV_PKT_NOT_PARSED_LBN 58
+#define	FSF_CZ_RX_EV_PKT_NOT_PARSED_WIDTH 1
+#define	FSF_CZ_RX_EV_IPV6_PKT_LBN 57
+#define	FSF_CZ_RX_EV_IPV6_PKT_WIDTH 1
+#define	FSF_AZ_RX_EV_PKT_OK_LBN 56
+#define	FSF_AZ_RX_EV_PKT_OK_WIDTH 1
+#define	FSF_AZ_RX_EV_PAUSE_FRM_ERR_LBN 55
+#define	FSF_AZ_RX_EV_PAUSE_FRM_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_BUF_OWNER_ID_ERR_LBN 54
+#define	FSF_AZ_RX_EV_BUF_OWNER_ID_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_IP_FRAG_ERR_LBN 53
+#define	FSF_AZ_RX_EV_IP_FRAG_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_IP_HDR_CHKSUM_ERR_LBN 52
+#define	FSF_AZ_RX_EV_IP_HDR_CHKSUM_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_TCP_UDP_CHKSUM_ERR_LBN 51
+#define	FSF_AZ_RX_EV_TCP_UDP_CHKSUM_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_ETH_CRC_ERR_LBN 50
+#define	FSF_AZ_RX_EV_ETH_CRC_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_FRM_TRUNC_LBN 49
+#define	FSF_AZ_RX_EV_FRM_TRUNC_WIDTH 1
+#define	FSF_AA_RX_EV_DRIB_NIB_LBN 49
+#define	FSF_AA_RX_EV_DRIB_NIB_WIDTH 1
+#define	FSF_AZ_RX_EV_TOBE_DISC_LBN 47
+#define	FSF_AZ_RX_EV_TOBE_DISC_WIDTH 1
+#define	FSF_AZ_RX_EV_PKT_TYPE_LBN 44
+#define	FSF_AZ_RX_EV_PKT_TYPE_WIDTH 3
+#define	FSE_AZ_RX_EV_PKT_TYPE_VLAN_JUMBO 5
+#define	FSE_AZ_RX_EV_PKT_TYPE_VLAN_LLC 4
+#define	FSE_AZ_RX_EV_PKT_TYPE_VLAN 3
+#define	FSE_AZ_RX_EV_PKT_TYPE_JUMBO 2
+#define	FSE_AZ_RX_EV_PKT_TYPE_LLC 1
+#define	FSE_AZ_RX_EV_PKT_TYPE_ETH 0
+#define	FSF_AZ_RX_EV_HDR_TYPE_LBN 42
+#define	FSF_AZ_RX_EV_HDR_TYPE_WIDTH 2
+#define	FSE_AZ_RX_EV_HDR_TYPE_OTHER 3
+#define	FSE_AB_RX_EV_HDR_TYPE_IPV4_OTHER 2
+#define	FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_OTHER 2
+#define	FSE_AB_RX_EV_HDR_TYPE_IPV4_UDP 1
+#define	FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP 1
+#define	FSE_AB_RX_EV_HDR_TYPE_IPV4_TCP 0
+#define	FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP 0
+#define	FSF_AZ_RX_EV_DESC_Q_EMPTY_LBN 41
+#define	FSF_AZ_RX_EV_DESC_Q_EMPTY_WIDTH 1
+#define	FSF_AZ_RX_EV_MCAST_HASH_MATCH_LBN 40
+#define	FSF_AZ_RX_EV_MCAST_HASH_MATCH_WIDTH 1
+#define	FSF_AZ_RX_EV_MCAST_PKT_LBN 39
+#define	FSF_AZ_RX_EV_MCAST_PKT_WIDTH 1
+#define	FSF_AA_RX_EV_RECOVERY_FLAG_LBN 37
+#define	FSF_AA_RX_EV_RECOVERY_FLAG_WIDTH 1
+#define	FSF_AZ_RX_EV_Q_LABEL_LBN 32
+#define	FSF_AZ_RX_EV_Q_LABEL_WIDTH 5
+#define	FSF_AZ_RX_EV_JUMBO_CONT_LBN 31
+#define	FSF_AZ_RX_EV_JUMBO_CONT_WIDTH 1
+#define	FSF_AZ_RX_EV_PORT_LBN 30
+#define	FSF_AZ_RX_EV_PORT_WIDTH 1
+#define	FSF_AZ_RX_EV_BYTE_CNT_LBN 16
+#define	FSF_AZ_RX_EV_BYTE_CNT_WIDTH 14
+#define	FSF_AZ_RX_EV_SOP_LBN 15
+#define	FSF_AZ_RX_EV_SOP_WIDTH 1
+#define	FSF_AZ_RX_EV_ISCSI_PKT_OK_LBN 14
+#define	FSF_AZ_RX_EV_ISCSI_PKT_OK_WIDTH 1
+#define	FSF_AZ_RX_EV_ISCSI_DDIG_ERR_LBN 13
+#define	FSF_AZ_RX_EV_ISCSI_DDIG_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_ISCSI_HDIG_ERR_LBN 12
+#define	FSF_AZ_RX_EV_ISCSI_HDIG_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_DESC_PTR_LBN 0
+#define	FSF_AZ_RX_EV_DESC_PTR_WIDTH 12
+
+/* RX_KER_DESC */
+#define	FSF_AZ_RX_KER_BUF_SIZE_LBN 48
+#define	FSF_AZ_RX_KER_BUF_SIZE_WIDTH 14
+#define	FSF_AZ_RX_KER_BUF_REGION_LBN 46
+#define	FSF_AZ_RX_KER_BUF_REGION_WIDTH 2
+#define	FSF_AZ_RX_KER_BUF_ADDR_LBN 0
+#define	FSF_AZ_RX_KER_BUF_ADDR_WIDTH 46
+
+/* RX_USER_DESC */
+#define	FSF_AZ_RX_USER_2BYTE_OFFSET_LBN 20
+#define	FSF_AZ_RX_USER_2BYTE_OFFSET_WIDTH 12
+#define	FSF_AZ_RX_USER_BUF_ID_LBN 0
+#define	FSF_AZ_RX_USER_BUF_ID_WIDTH 20
+
+/* TX_EV */
+#define	FSF_AZ_TX_EV_PKT_ERR_LBN 38
+#define	FSF_AZ_TX_EV_PKT_ERR_WIDTH 1
+#define	FSF_AZ_TX_EV_PKT_TOO_BIG_LBN 37
+#define	FSF_AZ_TX_EV_PKT_TOO_BIG_WIDTH 1
+#define	FSF_AZ_TX_EV_Q_LABEL_LBN 32
+#define	FSF_AZ_TX_EV_Q_LABEL_WIDTH 5
+#define	FSF_AZ_TX_EV_PORT_LBN 16
+#define	FSF_AZ_TX_EV_PORT_WIDTH 1
+#define	FSF_AZ_TX_EV_WQ_FF_FULL_LBN 15
+#define	FSF_AZ_TX_EV_WQ_FF_FULL_WIDTH 1
+#define	FSF_AZ_TX_EV_BUF_OWNER_ID_ERR_LBN 14
+#define	FSF_AZ_TX_EV_BUF_OWNER_ID_ERR_WIDTH 1
+#define	FSF_AZ_TX_EV_COMP_LBN 12
+#define	FSF_AZ_TX_EV_COMP_WIDTH 1
+#define	FSF_AZ_TX_EV_DESC_PTR_LBN 0
+#define	FSF_AZ_TX_EV_DESC_PTR_WIDTH 12
+
+/* TX_KER_DESC */
+#define	FSF_AZ_TX_KER_CONT_LBN 62
+#define	FSF_AZ_TX_KER_CONT_WIDTH 1
+#define	FSF_AZ_TX_KER_BYTE_COUNT_LBN 48
+#define	FSF_AZ_TX_KER_BYTE_COUNT_WIDTH 14
+#define	FSF_AZ_TX_KER_BUF_REGION_LBN 46
+#define	FSF_AZ_TX_KER_BUF_REGION_WIDTH 2
+#define	FSF_AZ_TX_KER_BUF_ADDR_LBN 0
+#define	FSF_AZ_TX_KER_BUF_ADDR_WIDTH 46
+
+/* TX_USER_DESC */
+#define	FSF_AZ_TX_USER_SW_EV_EN_LBN 48
+#define	FSF_AZ_TX_USER_SW_EV_EN_WIDTH 1
+#define	FSF_AZ_TX_USER_CONT_LBN 46
+#define	FSF_AZ_TX_USER_CONT_WIDTH 1
+#define	FSF_AZ_TX_USER_BYTE_CNT_LBN 33
+#define	FSF_AZ_TX_USER_BYTE_CNT_WIDTH 13
+#define	FSF_AZ_TX_USER_BUF_ID_LBN 13
+#define	FSF_AZ_TX_USER_BUF_ID_WIDTH 20
+#define	FSF_AZ_TX_USER_BYTE_OFS_LBN 0
+#define	FSF_AZ_TX_USER_BYTE_OFS_WIDTH 13
+
+/* USER_EV */
+#define	FSF_CZ_USER_QID_LBN 32
+#define	FSF_CZ_USER_QID_WIDTH 10
+#define	FSF_CZ_USER_EV_REG_VALUE_LBN 0
+#define	FSF_CZ_USER_EV_REG_VALUE_WIDTH 32
+
+/**************************************************************************
+ *
+ * Falcon B0 PCIe core indirect registers
+ *
+ **************************************************************************
+ */
+
+#define FPCR_BB_PCIE_DEVICE_CTRL_STAT 0x68
+
+#define FPCR_BB_PCIE_LINK_CTRL_STAT 0x70
+
+#define FPCR_BB_ACK_RPL_TIMER 0x700
+#define FPCRF_BB_ACK_TL_LBN 0
+#define FPCRF_BB_ACK_TL_WIDTH 16
+#define FPCRF_BB_RPL_TL_LBN 16
+#define FPCRF_BB_RPL_TL_WIDTH 16
+
+#define FPCR_BB_ACK_FREQ 0x70C
+#define FPCRF_BB_ACK_FREQ_LBN 0
+#define FPCRF_BB_ACK_FREQ_WIDTH 7
+
+/**************************************************************************
+ *
+ * Pseudo-registers and fields
+ *
+ **************************************************************************
+ */
+
+/* Interrupt acknowledge work-around register (A0/A1 only) */
+#define FR_AA_WORK_AROUND_BROKEN_PCI_READS 0x0070
+
+/* EE_SPI_HCMD_REG: SPI host command register */
+/* Values for the EE_SPI_HCMD_SF_SEL register field */
+#define FFE_AB_SPI_DEVICE_EEPROM 0
+#define FFE_AB_SPI_DEVICE_FLASH 1
+
+/* NIC_STAT_REG: NIC status register */
+#define FRF_AB_STRAP_10G_LBN 2
+#define FRF_AB_STRAP_10G_WIDTH 1
+#define FRF_AA_STRAP_PCIE_LBN 0
+#define FRF_AA_STRAP_PCIE_WIDTH 1
+
+/* FATAL_INTR_REG_KER: Fatal interrupt register for Kernel */
+#define FRF_AZ_FATAL_INTR_LBN 0
+#define FRF_AZ_FATAL_INTR_WIDTH 12
+
+/* SRM_CFG_REG: SRAM configuration register */
+/* We treat the number of SRAM banks and bank size as a single field */
+#define	FRF_AZ_SRM_NB_SZ_LBN FRF_AZ_SRM_BANK_SIZE_LBN
+#define	FRF_AZ_SRM_NB_SZ_WIDTH \
+	(FRF_AZ_SRM_BANK_SIZE_WIDTH + FRF_AZ_SRM_NUM_BANK_WIDTH)
+#define FFE_AB_SRM_NB1_SZ2M 0
+#define FFE_AB_SRM_NB1_SZ4M 1
+#define FFE_AB_SRM_NB1_SZ8M 2
+#define FFE_AB_SRM_NB_SZ_DEF 3
+#define FFE_AB_SRM_NB2_SZ4M 4
+#define FFE_AB_SRM_NB2_SZ8M 5
+#define FFE_AB_SRM_NB2_SZ16M 6
+#define FFE_AB_SRM_NB_SZ_RES 7
+
+/* RX_DESC_UPD_REGP0: Receive descriptor update register. */
+/* We write just the last dword of these registers */
+#define	FR_AZ_RX_DESC_UPD_DWORD_P0 \
+	(BUILD_BUG_ON_ZERO(FR_AA_RX_DESC_UPD_KER != FR_BZ_RX_DESC_UPD_P0) + \
+	 FR_BZ_RX_DESC_UPD_P0 + 3 * 4)
+#define	FRF_AZ_RX_DESC_WPTR_DWORD_LBN (FRF_AZ_RX_DESC_WPTR_LBN - 3 * 32)
+#define	FRF_AZ_RX_DESC_WPTR_DWORD_WIDTH FRF_AZ_RX_DESC_WPTR_WIDTH
+
+/* TX_DESC_UPD_REGP0: Transmit descriptor update register. */
+#define FR_AZ_TX_DESC_UPD_DWORD_P0 \
+	(BUILD_BUG_ON_ZERO(FR_AA_TX_DESC_UPD_KER != FR_BZ_TX_DESC_UPD_P0) + \
+	 FR_BZ_TX_DESC_UPD_P0 + 3 * 4)
+#define	FRF_AZ_TX_DESC_WPTR_DWORD_LBN (FRF_AZ_TX_DESC_WPTR_LBN - 3 * 32)
+#define	FRF_AZ_TX_DESC_WPTR_DWORD_WIDTH FRF_AZ_TX_DESC_WPTR_WIDTH
+
+/* GMF_CFG4_REG: GMAC FIFO configuration register 4 */
+#define FRF_AB_GMF_HSTFLTRFRM_PAUSE_LBN 12
+#define FRF_AB_GMF_HSTFLTRFRM_PAUSE_WIDTH 1
+
+/* GMF_CFG5_REG: GMAC FIFO configuration register 5 */
+#define FRF_AB_GMF_HSTFLTRFRMDC_PAUSE_LBN 12
+#define FRF_AB_GMF_HSTFLTRFRMDC_PAUSE_WIDTH 1
+
+/* XM_TX_PARAM_REG: XGMAC transmit parameter register */
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_LBN FRF_AB_XM_MAX_TX_FRM_SIZE_LO_LBN
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_WIDTH (FRF_AB_XM_MAX_TX_FRM_SIZE_HI_WIDTH + \
+					 FRF_AB_XM_MAX_TX_FRM_SIZE_LO_WIDTH)
+
+/* XM_RX_PARAM_REG: XGMAC receive parameter register */
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_LBN FRF_AB_XM_MAX_RX_FRM_SIZE_LO_LBN
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_WIDTH (FRF_AB_XM_MAX_RX_FRM_SIZE_HI_WIDTH + \
+					 FRF_AB_XM_MAX_RX_FRM_SIZE_LO_WIDTH)
+
+/* XX_TXDRV_CTL_REG: XAUI SerDes transmit drive control register */
+/* Default values */
+#define FFE_AB_XX_TXDRV_DEQ_DEF 0xe /* deq=.6 */
+#define FFE_AB_XX_TXDRV_DTX_DEF 0x5 /* 1.25 */
+#define FFE_AB_XX_SD_CTL_DRV_DEF 0  /* 20mA */
+
+/* XX_CORE_STAT_REG: XAUI XGXS core status register */
+/* XGXS all-lanes status fields */
+#define	FRF_AB_XX_SYNC_STAT_LBN FRF_AB_XX_SYNC_STAT0_LBN
+#define	FRF_AB_XX_SYNC_STAT_WIDTH 4
+#define	FRF_AB_XX_COMMA_DET_LBN FRF_AB_XX_COMMA_DET_CH0_LBN
+#define	FRF_AB_XX_COMMA_DET_WIDTH 4
+#define	FRF_AB_XX_CHAR_ERR_LBN FRF_AB_XX_CHAR_ERR_CH0_LBN
+#define	FRF_AB_XX_CHAR_ERR_WIDTH 4
+#define	FRF_AB_XX_DISPERR_LBN FRF_AB_XX_DISPERR_CH0_LBN
+#define	FRF_AB_XX_DISPERR_WIDTH 4
+#define	FFE_AB_XX_STAT_ALL_LANES 0xf
+#define	FRF_AB_XX_FORCE_SIG_LBN FRF_AB_XX_FORCE_SIG0_VAL_LBN
+#define	FRF_AB_XX_FORCE_SIG_WIDTH 8
+#define	FFE_AB_XX_FORCE_SIG_ALL_LANES 0xff
+
+/* DRIVER_EV */
+/* Sub-fields of an RX flush completion event */
+#define FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL_LBN 12
+#define FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL_WIDTH 1
+#define FSF_AZ_DRIVER_EV_RX_DESCQ_ID_LBN 0
+#define FSF_AZ_DRIVER_EV_RX_DESCQ_ID_WIDTH 12
+
+/* EVENT_ENTRY */
+/* Magic number field for event test */
+#define FSF_AZ_DRV_GEN_EV_MAGIC_LBN 0
+#define FSF_AZ_DRV_GEN_EV_MAGIC_WIDTH 32
+
+/**************************************************************************
+ *
+ * Falcon MAC stats
+ *
+ **************************************************************************
+ *
+ */
+
+#define GRxGoodOct_offset 0x0
+#define GRxGoodOct_WIDTH 48
+#define GRxBadOct_offset 0x8
+#define GRxBadOct_WIDTH 48
+#define GRxMissPkt_offset 0x10
+#define GRxMissPkt_WIDTH 32
+#define GRxFalseCRS_offset 0x14
+#define GRxFalseCRS_WIDTH 32
+#define GRxPausePkt_offset 0x18
+#define GRxPausePkt_WIDTH 32
+#define GRxBadPkt_offset 0x1C
+#define GRxBadPkt_WIDTH 32
+#define GRxUcastPkt_offset 0x20
+#define GRxUcastPkt_WIDTH 32
+#define GRxMcastPkt_offset 0x24
+#define GRxMcastPkt_WIDTH 32
+#define GRxBcastPkt_offset 0x28
+#define GRxBcastPkt_WIDTH 32
+#define GRxGoodLt64Pkt_offset 0x2C
+#define GRxGoodLt64Pkt_WIDTH 32
+#define GRxBadLt64Pkt_offset 0x30
+#define GRxBadLt64Pkt_WIDTH 32
+#define GRx64Pkt_offset 0x34
+#define GRx64Pkt_WIDTH 32
+#define GRx65to127Pkt_offset 0x38
+#define GRx65to127Pkt_WIDTH 32
+#define GRx128to255Pkt_offset 0x3C
+#define GRx128to255Pkt_WIDTH 32
+#define GRx256to511Pkt_offset 0x40
+#define GRx256to511Pkt_WIDTH 32
+#define GRx512to1023Pkt_offset 0x44
+#define GRx512to1023Pkt_WIDTH 32
+#define GRx1024to15xxPkt_offset 0x48
+#define GRx1024to15xxPkt_WIDTH 32
+#define GRx15xxtoJumboPkt_offset 0x4C
+#define GRx15xxtoJumboPkt_WIDTH 32
+#define GRxGtJumboPkt_offset 0x50
+#define GRxGtJumboPkt_WIDTH 32
+#define GRxFcsErr64to15xxPkt_offset 0x54
+#define GRxFcsErr64to15xxPkt_WIDTH 32
+#define GRxFcsErr15xxtoJumboPkt_offset 0x58
+#define GRxFcsErr15xxtoJumboPkt_WIDTH 32
+#define GRxFcsErrGtJumboPkt_offset 0x5C
+#define GRxFcsErrGtJumboPkt_WIDTH 32
+#define GTxGoodBadOct_offset 0x80
+#define GTxGoodBadOct_WIDTH 48
+#define GTxGoodOct_offset 0x88
+#define GTxGoodOct_WIDTH 48
+#define GTxSglColPkt_offset 0x90
+#define GTxSglColPkt_WIDTH 32
+#define GTxMultColPkt_offset 0x94
+#define GTxMultColPkt_WIDTH 32
+#define GTxExColPkt_offset 0x98
+#define GTxExColPkt_WIDTH 32
+#define GTxDefPkt_offset 0x9C
+#define GTxDefPkt_WIDTH 32
+#define GTxLateCol_offset 0xA0
+#define GTxLateCol_WIDTH 32
+#define GTxExDefPkt_offset 0xA4
+#define GTxExDefPkt_WIDTH 32
+#define GTxPausePkt_offset 0xA8
+#define GTxPausePkt_WIDTH 32
+#define GTxBadPkt_offset 0xAC
+#define GTxBadPkt_WIDTH 32
+#define GTxUcastPkt_offset 0xB0
+#define GTxUcastPkt_WIDTH 32
+#define GTxMcastPkt_offset 0xB4
+#define GTxMcastPkt_WIDTH 32
+#define GTxBcastPkt_offset 0xB8
+#define GTxBcastPkt_WIDTH 32
+#define GTxLt64Pkt_offset 0xBC
+#define GTxLt64Pkt_WIDTH 32
+#define GTx64Pkt_offset 0xC0
+#define GTx64Pkt_WIDTH 32
+#define GTx65to127Pkt_offset 0xC4
+#define GTx65to127Pkt_WIDTH 32
+#define GTx128to255Pkt_offset 0xC8
+#define GTx128to255Pkt_WIDTH 32
+#define GTx256to511Pkt_offset 0xCC
+#define GTx256to511Pkt_WIDTH 32
+#define GTx512to1023Pkt_offset 0xD0
+#define GTx512to1023Pkt_WIDTH 32
+#define GTx1024to15xxPkt_offset 0xD4
+#define GTx1024to15xxPkt_WIDTH 32
+#define GTx15xxtoJumboPkt_offset 0xD8
+#define GTx15xxtoJumboPkt_WIDTH 32
+#define GTxGtJumboPkt_offset 0xDC
+#define GTxGtJumboPkt_WIDTH 32
+#define GTxNonTcpUdpPkt_offset 0xE0
+#define GTxNonTcpUdpPkt_WIDTH 16
+#define GTxMacSrcErrPkt_offset 0xE4
+#define GTxMacSrcErrPkt_WIDTH 16
+#define GTxIpSrcErrPkt_offset 0xE8
+#define GTxIpSrcErrPkt_WIDTH 16
+#define GDmaDone_offset 0xEC
+#define GDmaDone_WIDTH 32
+
+#define XgRxOctets_offset 0x0
+#define XgRxOctets_WIDTH 48
+#define XgRxOctetsOK_offset 0x8
+#define XgRxOctetsOK_WIDTH 48
+#define XgRxPkts_offset 0x10
+#define XgRxPkts_WIDTH 32
+#define XgRxPktsOK_offset 0x14
+#define XgRxPktsOK_WIDTH 32
+#define XgRxBroadcastPkts_offset 0x18
+#define XgRxBroadcastPkts_WIDTH 32
+#define XgRxMulticastPkts_offset 0x1C
+#define XgRxMulticastPkts_WIDTH 32
+#define XgRxUnicastPkts_offset 0x20
+#define XgRxUnicastPkts_WIDTH 32
+#define XgRxUndersizePkts_offset 0x24
+#define XgRxUndersizePkts_WIDTH 32
+#define XgRxOversizePkts_offset 0x28
+#define XgRxOversizePkts_WIDTH 32
+#define XgRxJabberPkts_offset 0x2C
+#define XgRxJabberPkts_WIDTH 32
+#define XgRxUndersizeFCSerrorPkts_offset 0x30
+#define XgRxUndersizeFCSerrorPkts_WIDTH 32
+#define XgRxDropEvents_offset 0x34
+#define XgRxDropEvents_WIDTH 32
+#define XgRxFCSerrorPkts_offset 0x38
+#define XgRxFCSerrorPkts_WIDTH 32
+#define XgRxAlignError_offset 0x3C
+#define XgRxAlignError_WIDTH 32
+#define XgRxSymbolError_offset 0x40
+#define XgRxSymbolError_WIDTH 32
+#define XgRxInternalMACError_offset 0x44
+#define XgRxInternalMACError_WIDTH 32
+#define XgRxControlPkts_offset 0x48
+#define XgRxControlPkts_WIDTH 32
+#define XgRxPausePkts_offset 0x4C
+#define XgRxPausePkts_WIDTH 32
+#define XgRxPkts64Octets_offset 0x50
+#define XgRxPkts64Octets_WIDTH 32
+#define XgRxPkts65to127Octets_offset 0x54
+#define XgRxPkts65to127Octets_WIDTH 32
+#define XgRxPkts128to255Octets_offset 0x58
+#define XgRxPkts128to255Octets_WIDTH 32
+#define XgRxPkts256to511Octets_offset 0x5C
+#define XgRxPkts256to511Octets_WIDTH 32
+#define XgRxPkts512to1023Octets_offset 0x60
+#define XgRxPkts512to1023Octets_WIDTH 32
+#define XgRxPkts1024to15xxOctets_offset 0x64
+#define XgRxPkts1024to15xxOctets_WIDTH 32
+#define XgRxPkts15xxtoMaxOctets_offset 0x68
+#define XgRxPkts15xxtoMaxOctets_WIDTH 32
+#define XgRxLengthError_offset 0x6C
+#define XgRxLengthError_WIDTH 32
+#define XgTxPkts_offset 0x80
+#define XgTxPkts_WIDTH 32
+#define XgTxOctets_offset 0x88
+#define XgTxOctets_WIDTH 48
+#define XgTxMulticastPkts_offset 0x90
+#define XgTxMulticastPkts_WIDTH 32
+#define XgTxBroadcastPkts_offset 0x94
+#define XgTxBroadcastPkts_WIDTH 32
+#define XgTxUnicastPkts_offset 0x98
+#define XgTxUnicastPkts_WIDTH 32
+#define XgTxControlPkts_offset 0x9C
+#define XgTxControlPkts_WIDTH 32
+#define XgTxPausePkts_offset 0xA0
+#define XgTxPausePkts_WIDTH 32
+#define XgTxPkts64Octets_offset 0xA4
+#define XgTxPkts64Octets_WIDTH 32
+#define XgTxPkts65to127Octets_offset 0xA8
+#define XgTxPkts65to127Octets_WIDTH 32
+#define XgTxPkts128to255Octets_offset 0xAC
+#define XgTxPkts128to255Octets_WIDTH 32
+#define XgTxPkts256to511Octets_offset 0xB0
+#define XgTxPkts256to511Octets_WIDTH 32
+#define XgTxPkts512to1023Octets_offset 0xB4
+#define XgTxPkts512to1023Octets_WIDTH 32
+#define XgTxPkts1024to15xxOctets_offset 0xB8
+#define XgTxPkts1024to15xxOctets_WIDTH 32
+#define XgTxPkts1519toMaxOctets_offset 0xBC
+#define XgTxPkts1519toMaxOctets_WIDTH 32
+#define XgTxUndersizePkts_offset 0xC0
+#define XgTxUndersizePkts_WIDTH 32
+#define XgTxOversizePkts_offset 0xC4
+#define XgTxOversizePkts_WIDTH 32
+#define XgTxNonTcpUdpPkt_offset 0xC8
+#define XgTxNonTcpUdpPkt_WIDTH 16
+#define XgTxMacSrcErrPkt_offset 0xCC
+#define XgTxMacSrcErrPkt_WIDTH 16
+#define XgTxIpSrcErrPkt_offset 0xD0
+#define XgTxIpSrcErrPkt_WIDTH 16
+#define XgDmaDone_offset 0xD4
+#define XgDmaDone_WIDTH 32
+
+#define FALCON_STATS_NOT_DONE 0x00000000
+#define FALCON_STATS_DONE 0xffffffff
+
+/**************************************************************************
+ *
+ * Falcon non-volatile configuration
+ *
+ **************************************************************************
+ */
+
+/* Board configuration v2 (v1 is obsolete; later versions are compatible) */
+struct falcon_nvconfig_board_v2 {
+	__le16 nports;
+	u8 port0_phy_addr;
+	u8 port0_phy_type;
+	u8 port1_phy_addr;
+	u8 port1_phy_type;
+	__le16 asic_sub_revision;
+	__le16 board_revision;
+} __packed;
+
+/* Board configuration v3 extra information */
+struct falcon_nvconfig_board_v3 {
+	__le32 spi_device_type[2];
+} __packed;
+
+/* Bit numbers for spi_device_type */
+#define SPI_DEV_TYPE_SIZE_LBN 0
+#define SPI_DEV_TYPE_SIZE_WIDTH 5
+#define SPI_DEV_TYPE_ADDR_LEN_LBN 6
+#define SPI_DEV_TYPE_ADDR_LEN_WIDTH 2
+#define SPI_DEV_TYPE_ERASE_CMD_LBN 8
+#define SPI_DEV_TYPE_ERASE_CMD_WIDTH 8
+#define SPI_DEV_TYPE_ERASE_SIZE_LBN 16
+#define SPI_DEV_TYPE_ERASE_SIZE_WIDTH 5
+#define SPI_DEV_TYPE_BLOCK_SIZE_LBN 24
+#define SPI_DEV_TYPE_BLOCK_SIZE_WIDTH 5
+#define SPI_DEV_TYPE_FIELD(type, field)					\
+	(((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(EFX_WIDTH(field)))
+
+#define FALCON_NVCONFIG_OFFSET 0x300
+
+#define FALCON_NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
+struct falcon_nvconfig {
+	efx_oword_t ee_vpd_cfg_reg;			/* 0x300 */
+	u8 mac_address[2][8];			/* 0x310 */
+	efx_oword_t pcie_sd_ctl0123_reg;		/* 0x320 */
+	efx_oword_t pcie_sd_ctl45_reg;			/* 0x330 */
+	efx_oword_t pcie_pcs_ctl_stat_reg;		/* 0x340 */
+	efx_oword_t hw_init_reg;			/* 0x350 */
+	efx_oword_t nic_stat_reg;			/* 0x360 */
+	efx_oword_t glb_ctl_reg;			/* 0x370 */
+	efx_oword_t srm_cfg_reg;			/* 0x380 */
+	efx_oword_t spare_reg;				/* 0x390 */
+	__le16 board_magic_num;			/* 0x3A0 */
+	__le16 board_struct_ver;
+	__le16 board_checksum;
+	struct falcon_nvconfig_board_v2 board_v2;
+	efx_oword_t ee_base_page_reg;			/* 0x3B0 */
+	struct falcon_nvconfig_board_v3 board_v3;	/* 0x3C0 */
+} __packed;
+
+#endif /* EFX_REGS_H */
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 98bff5a..a97c923 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2005-2008 Solarflare Communications Inc.
+ * Copyright 2005-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -16,9 +16,8 @@
 #include <net/ip.h>
 #include <net/checksum.h>
 #include "net_driver.h"
-#include "rx.h"
 #include "efx.h"
-#include "falcon.h"
+#include "nic.h"
 #include "selftest.h"
 #include "workarounds.h"
 
@@ -61,7 +60,7 @@
  *   rx_alloc_method = (rx_alloc_level > RX_ALLOC_LEVEL_LRO ?
  *                      RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB)
  */
-static int rx_alloc_method = RX_ALLOC_METHOD_PAGE;
+static int rx_alloc_method = RX_ALLOC_METHOD_AUTO;
 
 #define RX_ALLOC_LEVEL_LRO 0x2000
 #define RX_ALLOC_LEVEL_MAX 0x3000
@@ -293,8 +292,7 @@
 	 * fill anyway.
 	 */
 	fill_level = (rx_queue->added_count - rx_queue->removed_count);
-	EFX_BUG_ON_PARANOID(fill_level >
-			    rx_queue->efx->type->rxd_ring_mask + 1);
+	EFX_BUG_ON_PARANOID(fill_level > EFX_RXQ_SIZE);
 
 	/* Don't fill if we don't need to */
 	if (fill_level >= rx_queue->fast_fill_trigger)
@@ -316,8 +314,7 @@
  retry:
 	/* Recalculate current fill level now that we have the lock */
 	fill_level = (rx_queue->added_count - rx_queue->removed_count);
-	EFX_BUG_ON_PARANOID(fill_level >
-			    rx_queue->efx->type->rxd_ring_mask + 1);
+	EFX_BUG_ON_PARANOID(fill_level > EFX_RXQ_SIZE);
 	space = rx_queue->fast_fill_limit - fill_level;
 	if (space < EFX_RX_BATCH)
 		goto out_unlock;
@@ -329,8 +326,7 @@
 
 	do {
 		for (i = 0; i < EFX_RX_BATCH; ++i) {
-			index = (rx_queue->added_count &
-				 rx_queue->efx->type->rxd_ring_mask);
+			index = rx_queue->added_count & EFX_RXQ_MASK;
 			rx_buf = efx_rx_buffer(rx_queue, index);
 			rc = efx_init_rx_buffer(rx_queue, rx_buf);
 			if (unlikely(rc))
@@ -345,7 +341,7 @@
 
  out:
 	/* Send write pointer to card. */
-	falcon_notify_rx_desc(rx_queue);
+	efx_nic_notify_rx_desc(rx_queue);
 
 	/* If the fast fill is running inside from the refill tasklet, then
 	 * for SMP systems it may be running on a different CPU to
@@ -448,17 +444,23 @@
 			      bool checksummed)
 {
 	struct napi_struct *napi = &channel->napi_str;
+	gro_result_t gro_result;
 
 	/* Pass the skb/page into the LRO engine */
 	if (rx_buf->page) {
-		struct sk_buff *skb = napi_get_frags(napi);
+		struct page *page = rx_buf->page;
+		struct sk_buff *skb;
 
+		EFX_BUG_ON_PARANOID(rx_buf->skb);
+		rx_buf->page = NULL;
+
+		skb = napi_get_frags(napi);
 		if (!skb) {
-			put_page(rx_buf->page);
-			goto out;
+			put_page(page);
+			return;
 		}
 
-		skb_shinfo(skb)->frags[0].page = rx_buf->page;
+		skb_shinfo(skb)->frags[0].page = page;
 		skb_shinfo(skb)->frags[0].page_offset =
 			efx_rx_buf_offset(rx_buf);
 		skb_shinfo(skb)->frags[0].size = rx_buf->len;
@@ -470,17 +472,24 @@
 		skb->ip_summed =
 			checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE;
 
-		napi_gro_frags(napi);
+		skb_record_rx_queue(skb, channel->channel);
 
-out:
-		EFX_BUG_ON_PARANOID(rx_buf->skb);
-		rx_buf->page = NULL;
+		gro_result = napi_gro_frags(napi);
 	} else {
-		EFX_BUG_ON_PARANOID(!rx_buf->skb);
-		EFX_BUG_ON_PARANOID(!checksummed);
+		struct sk_buff *skb = rx_buf->skb;
 
-		napi_gro_receive(napi, rx_buf->skb);
+		EFX_BUG_ON_PARANOID(!skb);
+		EFX_BUG_ON_PARANOID(!checksummed);
 		rx_buf->skb = NULL;
+
+		gro_result = napi_gro_receive(napi, skb);
+	}
+
+	if (gro_result == GRO_NORMAL) {
+		channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
+	} else if (gro_result != GRO_DROP) {
+		channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO;
+		channel->irq_mod_score += 2;
 	}
 }
 
@@ -558,7 +567,7 @@
 	if (unlikely(efx->loopback_selftest)) {
 		efx_loopback_rx_packet(efx, rx_buf->data, rx_buf->len);
 		efx_free_rx_buffer(efx, rx_buf);
-		goto done;
+		return;
 	}
 
 	if (rx_buf->skb) {
@@ -570,34 +579,28 @@
 		 * at the ethernet header */
 		rx_buf->skb->protocol = eth_type_trans(rx_buf->skb,
 						       efx->net_dev);
+
+		skb_record_rx_queue(rx_buf->skb, channel->channel);
 	}
 
 	if (likely(checksummed || rx_buf->page)) {
 		efx_rx_packet_lro(channel, rx_buf, checksummed);
-		goto done;
+		return;
 	}
 
 	/* We now own the SKB */
 	skb = rx_buf->skb;
 	rx_buf->skb = NULL;
-
-	EFX_BUG_ON_PARANOID(rx_buf->page);
-	EFX_BUG_ON_PARANOID(rx_buf->skb);
 	EFX_BUG_ON_PARANOID(!skb);
 
 	/* Set the SKB flags */
 	skb->ip_summed = CHECKSUM_NONE;
 
-	skb_record_rx_queue(skb, channel->channel);
-
 	/* Pass the packet up */
 	netif_receive_skb(skb);
 
 	/* Update allocation strategy method */
 	channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
-
-done:
-	;
 }
 
 void efx_rx_strategy(struct efx_channel *channel)
@@ -632,12 +635,12 @@
 	EFX_LOG(efx, "creating RX queue %d\n", rx_queue->queue);
 
 	/* Allocate RX buffers */
-	rxq_size = (efx->type->rxd_ring_mask + 1) * sizeof(*rx_queue->buffer);
+	rxq_size = EFX_RXQ_SIZE * sizeof(*rx_queue->buffer);
 	rx_queue->buffer = kzalloc(rxq_size, GFP_KERNEL);
 	if (!rx_queue->buffer)
 		return -ENOMEM;
 
-	rc = falcon_probe_rx(rx_queue);
+	rc = efx_nic_probe_rx(rx_queue);
 	if (rc) {
 		kfree(rx_queue->buffer);
 		rx_queue->buffer = NULL;
@@ -647,7 +650,6 @@
 
 void efx_init_rx_queue(struct efx_rx_queue *rx_queue)
 {
-	struct efx_nic *efx = rx_queue->efx;
 	unsigned int max_fill, trigger, limit;
 
 	EFX_LOG(rx_queue->efx, "initialising RX queue %d\n", rx_queue->queue);
@@ -660,7 +662,7 @@
 	rx_queue->min_overfill = -1U;
 
 	/* Initialise limit fields */
-	max_fill = efx->type->rxd_ring_mask + 1 - EFX_RXD_HEAD_ROOM;
+	max_fill = EFX_RXQ_SIZE - EFX_RXD_HEAD_ROOM;
 	trigger = max_fill * min(rx_refill_threshold, 100U) / 100U;
 	limit = max_fill * min(rx_refill_limit, 100U) / 100U;
 
@@ -669,7 +671,7 @@
 	rx_queue->fast_fill_limit = limit;
 
 	/* Set up RX descriptor ring */
-	falcon_init_rx(rx_queue);
+	efx_nic_init_rx(rx_queue);
 }
 
 void efx_fini_rx_queue(struct efx_rx_queue *rx_queue)
@@ -679,11 +681,11 @@
 
 	EFX_LOG(rx_queue->efx, "shutting down RX queue %d\n", rx_queue->queue);
 
-	falcon_fini_rx(rx_queue);
+	efx_nic_fini_rx(rx_queue);
 
 	/* Release RX buffers NB start at index 0 not current HW ptr */
 	if (rx_queue->buffer) {
-		for (i = 0; i <= rx_queue->efx->type->rxd_ring_mask; i++) {
+		for (i = 0; i <= EFX_RXQ_MASK; i++) {
 			rx_buf = efx_rx_buffer(rx_queue, i);
 			efx_fini_rx_buffer(rx_queue, rx_buf);
 		}
@@ -704,7 +706,7 @@
 {
 	EFX_LOG(rx_queue->efx, "destroying RX queue %d\n", rx_queue->queue);
 
-	falcon_remove_rx(rx_queue);
+	efx_nic_remove_rx(rx_queue);
 
 	kfree(rx_queue->buffer);
 	rx_queue->buffer = NULL;
diff --git a/drivers/net/sfc/rx.h b/drivers/net/sfc/rx.h
deleted file mode 100644
index 42ee755..0000000
--- a/drivers/net/sfc/rx.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_RX_H
-#define EFX_RX_H
-
-#include "net_driver.h"
-
-int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
-void efx_remove_rx_queue(struct efx_rx_queue *rx_queue);
-void efx_init_rx_queue(struct efx_rx_queue *rx_queue);
-void efx_fini_rx_queue(struct efx_rx_queue *rx_queue);
-
-void efx_rx_strategy(struct efx_channel *channel);
-void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue);
-void efx_rx_work(struct work_struct *data);
-void __efx_rx_packet(struct efx_channel *channel,
-		     struct efx_rx_buffer *rx_buf, bool checksummed);
-
-#endif /* EFX_RX_H */
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 817c7ef..14949bb 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -20,14 +20,12 @@
 #include <linux/rtnetlink.h>
 #include <asm/io.h>
 #include "net_driver.h"
-#include "ethtool.h"
 #include "efx.h"
-#include "falcon.h"
+#include "nic.h"
 #include "selftest.h"
-#include "boards.h"
 #include "workarounds.h"
 #include "spi.h"
-#include "falcon_io.h"
+#include "io.h"
 #include "mdio_10g.h"
 
 /*
@@ -57,6 +55,7 @@
  * @flush:		Drop all packets in efx_loopback_rx_packet
  * @packet_count:	Number of packets being used in this test
  * @skbs:		An array of skbs transmitted
+ * @offload_csum:	Checksums are being offloaded
  * @rx_good:		RX good packet count
  * @rx_bad:		RX bad packet count
  * @payload:		Payload used in tests
@@ -65,10 +64,7 @@
 	bool flush;
 	int packet_count;
 	struct sk_buff **skbs;
-
-	/* Checksums are being offloaded */
 	bool offload_csum;
-
 	atomic_t rx_good;
 	atomic_t rx_bad;
 	struct efx_loopback_payload payload;
@@ -104,7 +100,7 @@
 	}
 
 	if (EFX_IS10G(efx)) {
-		rc = efx_mdio_check_mmds(efx, efx->phy_op->mmds, 0);
+		rc = efx_mdio_check_mmds(efx, efx->mdio.mmds, 0);
 		if (rc)
 			goto out;
 	}
@@ -117,23 +113,26 @@
 
 static int efx_test_nvram(struct efx_nic *efx, struct efx_self_tests *tests)
 {
-	int rc;
+	int rc = 0;
 
-	rc = falcon_read_nvram(efx, NULL);
-	tests->nvram = rc ? -1 : 1;
+	if (efx->type->test_nvram) {
+		rc = efx->type->test_nvram(efx);
+		tests->nvram = rc ? -1 : 1;
+	}
+
 	return rc;
 }
 
 static int efx_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
 {
-	int rc;
+	int rc = 0;
 
-	/* Not supported on A-series silicon */
-	if (falcon_rev(efx) < FALCON_REV_B0)
-		return 0;
+	/* Test register access */
+	if (efx->type->test_registers) {
+		rc = efx->type->test_registers(efx);
+		tests->registers = rc ? -1 : 1;
+	}
 
-	rc = falcon_test_registers(efx);
-	tests->registers = rc ? -1 : 1;
 	return rc;
 }
 
@@ -165,7 +164,7 @@
 			goto success;
 	}
 
-	falcon_generate_interrupt(efx);
+	efx_nic_generate_interrupt(efx);
 
 	/* Wait for arrival of test interrupt. */
 	EFX_LOG(efx, "waiting for test interrupt\n");
@@ -177,8 +176,8 @@
 	return -ETIMEDOUT;
 
  success:
-	EFX_LOG(efx, "test interrupt (mode %d) seen on CPU%d\n",
-		efx->interrupt_mode, efx->last_irq_cpu);
+	EFX_LOG(efx, "%s test interrupt seen on CPU%d\n", INT_MODE(efx),
+		efx->last_irq_cpu);
 	tests->interrupt = 1;
 	return 0;
 }
@@ -203,7 +202,7 @@
 	channel->eventq_magic = 0;
 	smp_wmb();
 
-	falcon_generate_test_event(channel, magic);
+	efx_nic_generate_test_event(channel, magic);
 
 	/* Wait for arrival of interrupt */
 	count = 0;
@@ -254,9 +253,6 @@
 	if (!efx->phy_op->run_tests)
 		return 0;
 
-	EFX_BUG_ON_PARANOID(efx->phy_op->num_tests == 0 ||
-			    efx->phy_op->num_tests > EFX_MAX_PHY_TESTS);
-
 	mutex_lock(&efx->mac_lock);
 	rc = efx->phy_op->run_tests(efx, tests->phy, flags);
 	mutex_unlock(&efx->mac_lock);
@@ -426,7 +422,7 @@
 
 		if (efx_dev_registered(efx))
 			netif_tx_lock_bh(efx->net_dev);
-		rc = efx_xmit(efx, tx_queue, skb);
+		rc = efx_enqueue_skb(tx_queue, skb);
 		if (efx_dev_registered(efx))
 			netif_tx_unlock_bh(efx->net_dev);
 
@@ -439,7 +435,6 @@
 			kfree_skb(skb);
 			return -EPIPE;
 		}
-		efx->net_dev->trans_start = jiffies;
 	}
 
 	return 0;
@@ -527,7 +522,7 @@
 
 	for (i = 0; i < 3; i++) {
 		/* Determine how many packets to send */
-		state->packet_count = (efx->type->txd_ring_mask + 1) / 3;
+		state->packet_count = EFX_TXQ_SIZE / 3;
 		state->packet_count = min(1 << (i << 2), state->packet_count);
 		state->skbs = kzalloc(sizeof(state->skbs[0]) *
 				      state->packet_count, GFP_KERNEL);
@@ -568,14 +563,49 @@
 	return 0;
 }
 
+/* Wait for link up. On Falcon, we would prefer to rely on efx_monitor, but
+ * any contention on the mac lock (via e.g. efx_mac_mcast_work) causes it
+ * to delay and retry. Therefore, it's safer to just poll directly. Wait
+ * for link up and any faults to dissipate. */
+static int efx_wait_for_link(struct efx_nic *efx)
+{
+	struct efx_link_state *link_state = &efx->link_state;
+	int count;
+	bool link_up;
+
+	for (count = 0; count < 40; count++) {
+		schedule_timeout_uninterruptible(HZ / 10);
+
+		if (efx->type->monitor != NULL) {
+			mutex_lock(&efx->mac_lock);
+			efx->type->monitor(efx);
+			mutex_unlock(&efx->mac_lock);
+		} else {
+			struct efx_channel *channel = &efx->channel[0];
+			if (channel->work_pending)
+				efx_process_channel_now(channel);
+		}
+
+		mutex_lock(&efx->mac_lock);
+		link_up = link_state->up;
+		if (link_up)
+			link_up = !efx->mac_op->check_fault(efx);
+		mutex_unlock(&efx->mac_lock);
+
+		if (link_up)
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
 static int efx_test_loopbacks(struct efx_nic *efx, struct efx_self_tests *tests,
 			      unsigned int loopback_modes)
 {
 	enum efx_loopback_mode mode;
 	struct efx_loopback_state *state;
 	struct efx_tx_queue *tx_queue;
-	bool link_up;
-	int count, rc = 0;
+	int rc = 0;
 
 	/* Set the port loopback_selftest member. From this point on
 	 * all received packets will be dropped. Mark the state as
@@ -594,45 +624,22 @@
 
 		/* Move the port into the specified loopback mode. */
 		state->flush = true;
+		mutex_lock(&efx->mac_lock);
 		efx->loopback_mode = mode;
-		efx_reconfigure_port(efx);
-
-		/* Wait for the PHY to signal the link is up. Interrupts
-		 * are enabled for PHY's using LASI, otherwise we poll()
-		 * quickly */
-		count = 0;
-		do {
-			struct efx_channel *channel = &efx->channel[0];
-
-			efx->phy_op->poll(efx);
-			schedule_timeout_uninterruptible(HZ / 10);
-			if (channel->work_pending)
-				efx_process_channel_now(channel);
-			/* Wait for PHY events to be processed */
-			flush_workqueue(efx->workqueue);
-			rmb();
-
-			/* We need both the phy and xaui links to be ok.
-			 * rather than relying on the falcon_xmac irq/poll
-			 * regime, just poll xaui directly */
-			link_up = efx->link_up;
-			if (link_up && EFX_IS10G(efx) &&
-			    !falcon_xaui_link_ok(efx))
-				link_up = false;
-
-		} while ((++count < 20) && !link_up);
-
-		/* The link should now be up. If it isn't, there is no point
-		 * in attempting a loopback test */
-		if (!link_up) {
-			EFX_ERR(efx, "loopback %s never came up\n",
+		rc = __efx_reconfigure_port(efx);
+		mutex_unlock(&efx->mac_lock);
+		if (rc) {
+			EFX_ERR(efx, "unable to move into %s loopback\n",
 				LOOPBACK_MODE(efx));
-			rc = -EIO;
 			goto out;
 		}
 
-		EFX_LOG(efx, "link came up in %s loopback in %d iterations\n",
-			LOOPBACK_MODE(efx), count);
+		rc = efx_wait_for_link(efx);
+		if (rc) {
+			EFX_ERR(efx, "loopback %s never came up\n",
+				LOOPBACK_MODE(efx));
+			goto out;
+		}
 
 		/* Test every TX queue */
 		efx_for_each_tx_queue(tx_queue, efx) {
@@ -667,7 +674,6 @@
 	enum efx_loopback_mode loopback_mode = efx->loopback_mode;
 	int phy_mode = efx->phy_mode;
 	enum reset_type reset_method = RESET_TYPE_INVISIBLE;
-	struct ethtool_cmd ecmd;
 	struct efx_channel *channel;
 	int rc_test = 0, rc_reset = 0, rc;
 
@@ -720,21 +726,21 @@
 	mutex_unlock(&efx->mac_lock);
 
 	/* free up all consumers of SRAM (including all the queues) */
-	efx_reset_down(efx, reset_method, &ecmd);
+	efx_reset_down(efx, reset_method);
 
 	rc = efx_test_chip(efx, tests);
 	if (rc && !rc_test)
 		rc_test = rc;
 
 	/* reset the chip to recover from the register test */
-	rc_reset = falcon_reset_hw(efx, reset_method);
+	rc_reset = efx->type->reset(efx, reset_method);
 
 	/* Ensure that the phy is powered and out of loopback
 	 * for the bist and loopback tests */
 	efx->phy_mode &= ~PHY_MODE_LOW_POWER;
 	efx->loopback_mode = LOOPBACK_NONE;
 
-	rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0);
+	rc = efx_reset_up(efx, reset_method, rc_reset == 0);
 	if (rc && !rc_reset)
 		rc_reset = rc;
 
@@ -753,10 +759,12 @@
 		rc_test = rc;
 
 	/* restore the PHY to the previous state */
-	efx->loopback_mode = loopback_mode;
+	mutex_lock(&efx->mac_lock);
 	efx->phy_mode = phy_mode;
 	efx->port_inhibited = false;
-	efx_ethtool_set_settings(efx->net_dev, &ecmd);
+	efx->loopback_mode = loopback_mode;
+	__efx_reconfigure_port(efx);
+	mutex_unlock(&efx->mac_lock);
 
 	return rc_test;
 }
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
deleted file mode 100644
index 49eb91b..0000000
--- a/drivers/net/sfc/sfe4001.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-/*****************************************************************************
- * Support for the SFE4001 and SFN4111T NICs.
- *
- * The SFE4001 does not power-up fully at reset due to its high power
- * consumption.  We control its power via a PCA9539 I/O expander.
- * Both boards have a MAX6647 temperature monitor which we expose to
- * the lm90 driver.
- *
- * This also provides minimal support for reflashing the PHY, which is
- * initiated by resetting it with the FLASH_CFG_1 pin pulled down.
- * On SFE4001 rev A2 and later this is connected to the 3V3X output of
- * the IO-expander; on the SFN4111T it is connected to Falcon's GPIO3.
- * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually
- * exclusive with the network device being open.
- */
-
-#include <linux/delay.h>
-#include <linux/rtnetlink.h>
-#include "net_driver.h"
-#include "efx.h"
-#include "phy.h"
-#include "boards.h"
-#include "falcon.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
-#include "mac.h"
-#include "workarounds.h"
-
-/**************************************************************************
- *
- * I2C IO Expander device
- *
- **************************************************************************/
-#define	PCA9539 0x74
-
-#define	P0_IN 0x00
-#define	P0_OUT 0x02
-#define	P0_INVERT 0x04
-#define	P0_CONFIG 0x06
-
-#define	P0_EN_1V0X_LBN 0
-#define	P0_EN_1V0X_WIDTH 1
-#define	P0_EN_1V2_LBN 1
-#define	P0_EN_1V2_WIDTH 1
-#define	P0_EN_2V5_LBN 2
-#define	P0_EN_2V5_WIDTH 1
-#define	P0_EN_3V3X_LBN 3
-#define	P0_EN_3V3X_WIDTH 1
-#define	P0_EN_5V_LBN 4
-#define	P0_EN_5V_WIDTH 1
-#define	P0_SHORTEN_JTAG_LBN 5
-#define	P0_SHORTEN_JTAG_WIDTH 1
-#define	P0_X_TRST_LBN 6
-#define	P0_X_TRST_WIDTH 1
-#define	P0_DSP_RESET_LBN 7
-#define	P0_DSP_RESET_WIDTH 1
-
-#define	P1_IN 0x01
-#define	P1_OUT 0x03
-#define	P1_INVERT 0x05
-#define	P1_CONFIG 0x07
-
-#define	P1_AFE_PWD_LBN 0
-#define	P1_AFE_PWD_WIDTH 1
-#define	P1_DSP_PWD25_LBN 1
-#define	P1_DSP_PWD25_WIDTH 1
-#define	P1_RESERVED_LBN 2
-#define	P1_RESERVED_WIDTH 2
-#define	P1_SPARE_LBN 4
-#define	P1_SPARE_WIDTH 4
-
-/* Temperature Sensor */
-#define MAX664X_REG_RSL		0x02
-#define MAX664X_REG_WLHO	0x0B
-
-static void sfe4001_poweroff(struct efx_nic *efx)
-{
-	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
-	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
-
-	/* Turn off all power rails and disable outputs */
-	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
-	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
-	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);
-
-	/* Clear any over-temperature alert */
-	i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
-}
-
-static int sfe4001_poweron(struct efx_nic *efx)
-{
-	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
-	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
-	unsigned int i, j;
-	int rc;
-	u8 out;
-
-	/* Clear any previous over-temperature alert */
-	rc = i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
-	if (rc < 0)
-		return rc;
-
-	/* Enable port 0 and port 1 outputs on IO expander */
-	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
-	if (rc)
-		return rc;
-	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
-				       0xff & ~(1 << P1_SPARE_LBN));
-	if (rc)
-		goto fail_on;
-
-	/* If PHY power is on, turn it all off and wait 1 second to
-	 * ensure a full reset.
-	 */
-	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
-	if (rc < 0)
-		goto fail_on;
-	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
-		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
-		       (0 << P0_EN_1V0X_LBN));
-	if (rc != out) {
-		EFX_INFO(efx, "power-cycling PHY\n");
-		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
-		if (rc)
-			goto fail_on;
-		schedule_timeout_uninterruptible(HZ);
-	}
-
-	for (i = 0; i < 20; ++i) {
-		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
-		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
-			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
-			       (1 << P0_X_TRST_LBN));
-		if (efx->phy_mode & PHY_MODE_SPECIAL)
-			out |= 1 << P0_EN_3V3X_LBN;
-
-		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
-		if (rc)
-			goto fail_on;
-		msleep(10);
-
-		/* Turn on 1V power rail */
-		out &= ~(1 << P0_EN_1V0X_LBN);
-		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
-		if (rc)
-			goto fail_on;
-
-		EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);
-
-		/* In flash config mode, DSP does not turn on AFE, so
-		 * just wait 1 second.
-		 */
-		if (efx->phy_mode & PHY_MODE_SPECIAL) {
-			schedule_timeout_uninterruptible(HZ);
-			return 0;
-		}
-
-		for (j = 0; j < 10; ++j) {
-			msleep(100);
-
-			/* Check DSP has asserted AFE power line */
-			rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
-			if (rc < 0)
-				goto fail_on;
-			if (rc & (1 << P1_AFE_PWD_LBN))
-				return 0;
-		}
-	}
-
-	EFX_INFO(efx, "timed out waiting for DSP boot\n");
-	rc = -ETIMEDOUT;
-fail_on:
-	sfe4001_poweroff(efx);
-	return rc;
-}
-
-static int sfn4111t_reset(struct efx_nic *efx)
-{
-	efx_oword_t reg;
-
-	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
-	i2c_lock_adapter(&efx->i2c_adap);
-
-	/* Pull RST_N (GPIO 2) low then let it up again, setting the
-	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
-	 * output enables; the output levels should always be 0 (low)
-	 * and we rely on external pull-ups. */
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true);
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
-	msleep(1000);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN,
-			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
-	msleep(1);
-
-	i2c_unlock_adapter(&efx->i2c_adap);
-
-	ssleep(1);
-	return 0;
-}
-
-static ssize_t show_phy_flash_cfg(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
-	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
-}
-
-static ssize_t set_phy_flash_cfg(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
-	enum efx_phy_mode old_mode, new_mode;
-	int err;
-
-	rtnl_lock();
-	old_mode = efx->phy_mode;
-	if (count == 0 || *buf == '0')
-		new_mode = old_mode & ~PHY_MODE_SPECIAL;
-	else
-		new_mode = PHY_MODE_SPECIAL;
-	if (old_mode == new_mode) {
-		err = 0;
-	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
-		err = -EBUSY;
-	} else {
-		/* Reset the PHY, reconfigure the MAC and enable/disable
-		 * MAC stats accordingly. */
-		efx->phy_mode = new_mode;
-		if (new_mode & PHY_MODE_SPECIAL)
-			efx_stats_disable(efx);
-		if (efx->board_info.type == EFX_BOARD_SFE4001)
-			err = sfe4001_poweron(efx);
-		else
-			err = sfn4111t_reset(efx);
-		efx_reconfigure_port(efx);
-		if (!(new_mode & PHY_MODE_SPECIAL))
-			efx_stats_enable(efx);
-	}
-	rtnl_unlock();
-
-	return err ? err : count;
-}
-
-static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
-
-static void sfe4001_fini(struct efx_nic *efx)
-{
-	EFX_INFO(efx, "%s\n", __func__);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	sfe4001_poweroff(efx);
-	i2c_unregister_device(efx->board_info.ioexp_client);
-	i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-static int sfe4001_check_hw(struct efx_nic *efx)
-{
-	s32 status;
-
-	/* If XAUI link is up then do not monitor */
-	if (EFX_WORKAROUND_7884(efx) && efx->mac_up)
-		return 0;
-
-	/* Check the powered status of the PHY. Lack of power implies that
-	 * the MAX6647 has shut down power to it, probably due to a temp.
-	 * alarm. Reading the power status rather than the MAX6647 status
-	 * directly because the later is read-to-clear and would thus
-	 * start to power up the PHY again when polled, causing us to blip
-	 * the power undesirably.
-	 * We know we can read from the IO expander because we did
-	 * it during power-on. Assume failure now is bad news. */
-	status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN);
-	if (status >= 0 &&
-	    (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0)
-		return 0;
-
-	/* Use board power control, not PHY power control */
-	sfe4001_poweroff(efx);
-	efx->phy_mode = PHY_MODE_OFF;
-
-	return (status < 0) ? -EIO : -ERANGE;
-}
-
-static struct i2c_board_info sfe4001_hwmon_info = {
-	I2C_BOARD_INFO("max6647", 0x4e),
-};
-
-/* This board uses an I2C expander to provider power to the PHY, which needs to
- * be turned on before the PHY can be used.
- * Context: Process context, rtnl lock held
- */
-int sfe4001_init(struct efx_nic *efx)
-{
-	int rc;
-
-#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE)
-	efx->board_info.hwmon_client =
-		i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
-#else
-	efx->board_info.hwmon_client =
-		i2c_new_dummy(&efx->i2c_adap, sfe4001_hwmon_info.addr);
-#endif
-	if (!efx->board_info.hwmon_client)
-		return -EIO;
-
-	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
-	rc = i2c_smbus_write_byte_data(efx->board_info.hwmon_client,
-				       MAX664X_REG_WLHO, 90);
-	if (rc)
-		goto fail_hwmon;
-
-	efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
-	if (!efx->board_info.ioexp_client) {
-		rc = -EIO;
-		goto fail_hwmon;
-	}
-
-	/* 10Xpress has fixed-function LED pins, so there is no board-specific
-	 * blink code. */
-	efx->board_info.blink = tenxpress_phy_blink;
-
-	efx->board_info.monitor = sfe4001_check_hw;
-	efx->board_info.fini = sfe4001_fini;
-
-	if (efx->phy_mode & PHY_MODE_SPECIAL) {
-		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
-		 * will fail. */
-		efx_stats_disable(efx);
-	}
-	rc = sfe4001_poweron(efx);
-	if (rc)
-		goto fail_ioexp;
-
-	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	if (rc)
-		goto fail_on;
-
-	EFX_INFO(efx, "PHY is powered on\n");
-	return 0;
-
-fail_on:
-	sfe4001_poweroff(efx);
-fail_ioexp:
-	i2c_unregister_device(efx->board_info.ioexp_client);
-fail_hwmon:
-	i2c_unregister_device(efx->board_info.hwmon_client);
-	return rc;
-}
-
-static int sfn4111t_check_hw(struct efx_nic *efx)
-{
-	s32 status;
-
-	/* If XAUI link is up then do not monitor */
-	if (EFX_WORKAROUND_7884(efx) && efx->mac_up)
-		return 0;
-
-	/* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */
-	status = i2c_smbus_read_byte_data(efx->board_info.hwmon_client,
-					  MAX664X_REG_RSL);
-	if (status < 0)
-		return -EIO;
-	if (status & 0x57)
-		return -ERANGE;
-	return 0;
-}
-
-static void sfn4111t_fini(struct efx_nic *efx)
-{
-	EFX_INFO(efx, "%s\n", __func__);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-static struct i2c_board_info sfn4111t_a0_hwmon_info = {
-	I2C_BOARD_INFO("max6647", 0x4e),
-};
-
-static struct i2c_board_info sfn4111t_r5_hwmon_info = {
-	I2C_BOARD_INFO("max6646", 0x4d),
-};
-
-int sfn4111t_init(struct efx_nic *efx)
-{
-	int i = 0;
-	int rc;
-
-	efx->board_info.hwmon_client =
-		i2c_new_device(&efx->i2c_adap,
-			       (efx->board_info.minor < 5) ?
-			       &sfn4111t_a0_hwmon_info :
-			       &sfn4111t_r5_hwmon_info);
-	if (!efx->board_info.hwmon_client)
-		return -EIO;
-
-	efx->board_info.blink = tenxpress_phy_blink;
-	efx->board_info.monitor = sfn4111t_check_hw;
-	efx->board_info.fini = sfn4111t_fini;
-
-	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	if (rc)
-		goto fail_hwmon;
-
-	do {
-		if (efx->phy_mode & PHY_MODE_SPECIAL) {
-			/* PHY may not generate a 156.25 MHz clock and MAC
-			 * stats fetch will fail. */
-			efx_stats_disable(efx);
-			sfn4111t_reset(efx);
-		}
-		rc = sft9001_wait_boot(efx);
-		if (rc == 0)
-			return 0;
-		efx->phy_mode = PHY_MODE_SPECIAL;
-	} while (rc == -EINVAL && ++i < 2);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-fail_hwmon:
-	i2c_unregister_device(efx->board_info.hwmon_client);
-	return rc;
-}
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
new file mode 100644
index 0000000..de07a4f
--- /dev/null
+++ b/drivers/net/sfc/siena.c
@@ -0,0 +1,604 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include "net_driver.h"
+#include "bitfield.h"
+#include "efx.h"
+#include "nic.h"
+#include "mac.h"
+#include "spi.h"
+#include "regs.h"
+#include "io.h"
+#include "phy.h"
+#include "workarounds.h"
+#include "mcdi.h"
+#include "mcdi_pcol.h"
+
+/* Hardware control for SFC9000 family including SFL9021 (aka Siena). */
+
+static void siena_init_wol(struct efx_nic *efx);
+
+
+static void siena_push_irq_moderation(struct efx_channel *channel)
+{
+	efx_dword_t timer_cmd;
+
+	if (channel->irq_moderation)
+		EFX_POPULATE_DWORD_2(timer_cmd,
+				     FRF_CZ_TC_TIMER_MODE,
+				     FFE_CZ_TIMER_MODE_INT_HLDOFF,
+				     FRF_CZ_TC_TIMER_VAL,
+				     channel->irq_moderation - 1);
+	else
+		EFX_POPULATE_DWORD_2(timer_cmd,
+				     FRF_CZ_TC_TIMER_MODE,
+				     FFE_CZ_TIMER_MODE_DIS,
+				     FRF_CZ_TC_TIMER_VAL, 0);
+	efx_writed_page_locked(channel->efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0,
+			       channel->channel);
+}
+
+static void siena_push_multicast_hash(struct efx_nic *efx)
+{
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+	efx_mcdi_rpc(efx, MC_CMD_SET_MCAST_HASH,
+		     efx->multicast_hash.byte, sizeof(efx->multicast_hash),
+		     NULL, 0, NULL);
+}
+
+static int siena_mdio_write(struct net_device *net_dev,
+			    int prtad, int devad, u16 addr, u16 value)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	uint32_t status;
+	int rc;
+
+	rc = efx_mcdi_mdio_write(efx, efx->mdio_bus, prtad, devad,
+				 addr, value, &status);
+	if (rc)
+		return rc;
+	if (status != MC_CMD_MDIO_STATUS_GOOD)
+		return -EIO;
+
+	return 0;
+}
+
+static int siena_mdio_read(struct net_device *net_dev,
+			   int prtad, int devad, u16 addr)
+{
+	struct efx_nic *efx = netdev_priv(net_dev);
+	uint16_t value;
+	uint32_t status;
+	int rc;
+
+	rc = efx_mcdi_mdio_read(efx, efx->mdio_bus, prtad, devad,
+				addr, &value, &status);
+	if (rc)
+		return rc;
+	if (status != MC_CMD_MDIO_STATUS_GOOD)
+		return -EIO;
+
+	return (int)value;
+}
+
+/* This call is responsible for hooking in the MAC and PHY operations */
+static int siena_probe_port(struct efx_nic *efx)
+{
+	int rc;
+
+	/* Hook in PHY operations table */
+	efx->phy_op = &efx_mcdi_phy_ops;
+
+	/* Set up MDIO structure for PHY */
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->mdio.mdio_read = siena_mdio_read;
+	efx->mdio.mdio_write = siena_mdio_write;
+
+	/* Fill out MDIO structure and loopback modes */
+	rc = efx->phy_op->probe(efx);
+	if (rc != 0)
+		return rc;
+
+	/* Initial assumption */
+	efx->link_state.speed = 10000;
+	efx->link_state.fd = true;
+	efx->wanted_fc = EFX_FC_RX | EFX_FC_TX;
+
+	/* Allocate buffer for stats */
+	rc = efx_nic_alloc_buffer(efx, &efx->stats_buffer,
+				  MC_CMD_MAC_NSTATS * sizeof(u64));
+	if (rc)
+		return rc;
+	EFX_LOG(efx, "stats buffer at %llx (virt %p phys %llx)\n",
+		(u64)efx->stats_buffer.dma_addr,
+		efx->stats_buffer.addr,
+		(u64)virt_to_phys(efx->stats_buffer.addr));
+
+	efx_mcdi_mac_stats(efx, efx->stats_buffer.dma_addr, 0, 0, 1);
+
+	return 0;
+}
+
+void siena_remove_port(struct efx_nic *efx)
+{
+	efx_nic_free_buffer(efx, &efx->stats_buffer);
+}
+
+static const struct efx_nic_register_test siena_register_tests[] = {
+	{ FR_AZ_ADR_REGION,
+	  EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) },
+	{ FR_CZ_USR_EV_CFG,
+	  EFX_OWORD32(0x000103FF, 0x00000000, 0x00000000, 0x00000000) },
+	{ FR_AZ_RX_CFG,
+	  EFX_OWORD32(0xFFFFFFFE, 0xFFFFFFFF, 0x0003FFFF, 0x00000000) },
+	{ FR_AZ_TX_CFG,
+	  EFX_OWORD32(0x7FFF0037, 0xFFFF8000, 0xFFFFFFFF, 0x03FFFFFF) },
+	{ FR_AZ_TX_RESERVED,
+	  EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) },
+	{ FR_AZ_SRM_TX_DC_CFG,
+	  EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) },
+	{ FR_AZ_RX_DC_CFG,
+	  EFX_OWORD32(0x00000003, 0x00000000, 0x00000000, 0x00000000) },
+	{ FR_AZ_RX_DC_PF_WM,
+	  EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) },
+	{ FR_BZ_DP_CTRL,
+	  EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) },
+	{ FR_BZ_RX_RSS_TKEY,
+	  EFX_OWORD32(0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF) },
+	{ FR_CZ_RX_RSS_IPV6_REG1,
+	  EFX_OWORD32(0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF) },
+	{ FR_CZ_RX_RSS_IPV6_REG2,
+	  EFX_OWORD32(0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF) },
+	{ FR_CZ_RX_RSS_IPV6_REG3,
+	  EFX_OWORD32(0xFFFFFFFF, 0xFFFFFFFF, 0x00000007, 0x00000000) },
+};
+
+static int siena_test_registers(struct efx_nic *efx)
+{
+	return efx_nic_test_registers(efx, siena_register_tests,
+				      ARRAY_SIZE(siena_register_tests));
+}
+
+/**************************************************************************
+ *
+ * Device reset
+ *
+ **************************************************************************
+ */
+
+static int siena_reset_hw(struct efx_nic *efx, enum reset_type method)
+{
+
+	if (method == RESET_TYPE_WORLD)
+		return efx_mcdi_reset_mc(efx);
+	else
+		return efx_mcdi_reset_port(efx);
+}
+
+static int siena_probe_nvconfig(struct efx_nic *efx)
+{
+	int rc;
+
+	rc = efx_mcdi_get_board_cfg(efx, efx->mac_address, NULL);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static int siena_probe_nic(struct efx_nic *efx)
+{
+	struct siena_nic_data *nic_data;
+	bool already_attached = 0;
+	int rc;
+
+	/* Allocate storage for hardware specific data */
+	nic_data = kzalloc(sizeof(struct siena_nic_data), GFP_KERNEL);
+	if (!nic_data)
+		return -ENOMEM;
+	efx->nic_data = nic_data;
+
+	if (efx_nic_fpga_ver(efx) != 0) {
+		EFX_ERR(efx, "Siena FPGA not supported\n");
+		rc = -ENODEV;
+		goto fail1;
+	}
+
+	efx_mcdi_init(efx);
+
+	/* Recover from a failed assertion before probing */
+	rc = efx_mcdi_handle_assertion(efx);
+	if (rc)
+		goto fail1;
+
+	rc = efx_mcdi_fwver(efx, &nic_data->fw_version, &nic_data->fw_build);
+	if (rc) {
+		EFX_ERR(efx, "Failed to read MCPU firmware version - "
+			"rc %d\n", rc);
+		goto fail1; /* MCPU absent? */
+	}
+
+	/* Let the BMC know that the driver is now in charge of link and
+	 * filter settings. We must do this before we reset the NIC */
+	rc = efx_mcdi_drv_attach(efx, true, &already_attached);
+	if (rc) {
+		EFX_ERR(efx, "Unable to register driver with MCPU\n");
+		goto fail2;
+	}
+	if (already_attached)
+		/* Not a fatal error */
+		EFX_ERR(efx, "Host already registered with MCPU\n");
+
+	/* Now we can reset the NIC */
+	rc = siena_reset_hw(efx, RESET_TYPE_ALL);
+	if (rc) {
+		EFX_ERR(efx, "failed to reset NIC\n");
+		goto fail3;
+	}
+
+	siena_init_wol(efx);
+
+	/* Allocate memory for INT_KER */
+	rc = efx_nic_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t));
+	if (rc)
+		goto fail4;
+	BUG_ON(efx->irq_status.dma_addr & 0x0f);
+
+	EFX_LOG(efx, "INT_KER at %llx (virt %p phys %llx)\n",
+		(unsigned long long)efx->irq_status.dma_addr,
+		efx->irq_status.addr,
+		(unsigned long long)virt_to_phys(efx->irq_status.addr));
+
+	/* Read in the non-volatile configuration */
+	rc = siena_probe_nvconfig(efx);
+	if (rc == -EINVAL) {
+		EFX_ERR(efx, "NVRAM is invalid therefore using defaults\n");
+		efx->phy_type = PHY_TYPE_NONE;
+		efx->mdio.prtad = MDIO_PRTAD_NONE;
+	} else if (rc) {
+		goto fail5;
+	}
+
+	return 0;
+
+fail5:
+	efx_nic_free_buffer(efx, &efx->irq_status);
+fail4:
+fail3:
+	efx_mcdi_drv_attach(efx, false, NULL);
+fail2:
+fail1:
+	kfree(efx->nic_data);
+	return rc;
+}
+
+/* This call performs hardware-specific global initialisation, such as
+ * defining the descriptor cache sizes and number of RSS channels.
+ * It does not set up any buffers, descriptor rings or event queues.
+ */
+static int siena_init_nic(struct efx_nic *efx)
+{
+	efx_oword_t temp;
+	int rc;
+
+	/* Recover from a failed assertion post-reset */
+	rc = efx_mcdi_handle_assertion(efx);
+	if (rc)
+		return rc;
+
+	/* Squash TX of packets of 16 bytes or less */
+	efx_reado(efx, &temp, FR_AZ_TX_RESERVED);
+	EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
+	efx_writeo(efx, &temp, FR_AZ_TX_RESERVED);
+
+	/* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16
+	 * descriptors (which is bad).
+	 */
+	efx_reado(efx, &temp, FR_AZ_TX_CFG);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0);
+	EFX_SET_OWORD_FIELD(temp, FRF_CZ_TX_FILTER_EN_BIT, 1);
+	efx_writeo(efx, &temp, FR_AZ_TX_CFG);
+
+	efx_reado(efx, &temp, FR_AZ_RX_CFG);
+	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_DESC_PUSH_EN, 0);
+	EFX_SET_OWORD_FIELD(temp, FRF_BZ_RX_INGR_EN, 1);
+	efx_writeo(efx, &temp, FR_AZ_RX_CFG);
+
+	if (efx_nic_rx_xoff_thresh >= 0 || efx_nic_rx_xon_thresh >= 0)
+		/* No MCDI operation has been defined to set thresholds */
+		EFX_ERR(efx, "ignoring RX flow control thresholds\n");
+
+	/* Enable event logging */
+	rc = efx_mcdi_log_ctrl(efx, true, false, 0);
+	if (rc)
+		return rc;
+
+	/* Set destination of both TX and RX Flush events */
+	EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0);
+	efx_writeo(efx, &temp, FR_BZ_DP_CTRL);
+
+	EFX_POPULATE_OWORD_1(temp, FRF_CZ_USREV_DIS, 1);
+	efx_writeo(efx, &temp, FR_CZ_USR_EV_CFG);
+
+	efx_nic_init_common(efx);
+	return 0;
+}
+
+static void siena_remove_nic(struct efx_nic *efx)
+{
+	efx_nic_free_buffer(efx, &efx->irq_status);
+
+	siena_reset_hw(efx, RESET_TYPE_ALL);
+
+	/* Relinquish the device back to the BMC */
+	if (efx_nic_has_mc(efx))
+		efx_mcdi_drv_attach(efx, false, NULL);
+
+	/* Tear down the private nic state */
+	kfree(efx->nic_data);
+	efx->nic_data = NULL;
+}
+
+#define STATS_GENERATION_INVALID ((u64)(-1))
+
+static int siena_try_update_nic_stats(struct efx_nic *efx)
+{
+	u64 *dma_stats;
+	struct efx_mac_stats *mac_stats;
+	u64 generation_start;
+	u64 generation_end;
+
+	mac_stats = &efx->mac_stats;
+	dma_stats = (u64 *)efx->stats_buffer.addr;
+
+	generation_end = dma_stats[MC_CMD_MAC_GENERATION_END];
+	if (generation_end == STATS_GENERATION_INVALID)
+		return 0;
+	rmb();
+
+#define MAC_STAT(M, D) \
+	mac_stats->M = dma_stats[MC_CMD_MAC_ ## D]
+
+	MAC_STAT(tx_bytes, TX_BYTES);
+	MAC_STAT(tx_bad_bytes, TX_BAD_BYTES);
+	mac_stats->tx_good_bytes = (mac_stats->tx_bytes -
+				    mac_stats->tx_bad_bytes);
+	MAC_STAT(tx_packets, TX_PKTS);
+	MAC_STAT(tx_bad, TX_BAD_FCS_PKTS);
+	MAC_STAT(tx_pause, TX_PAUSE_PKTS);
+	MAC_STAT(tx_control, TX_CONTROL_PKTS);
+	MAC_STAT(tx_unicast, TX_UNICAST_PKTS);
+	MAC_STAT(tx_multicast, TX_MULTICAST_PKTS);
+	MAC_STAT(tx_broadcast, TX_BROADCAST_PKTS);
+	MAC_STAT(tx_lt64, TX_LT64_PKTS);
+	MAC_STAT(tx_64, TX_64_PKTS);
+	MAC_STAT(tx_65_to_127, TX_65_TO_127_PKTS);
+	MAC_STAT(tx_128_to_255, TX_128_TO_255_PKTS);
+	MAC_STAT(tx_256_to_511, TX_256_TO_511_PKTS);
+	MAC_STAT(tx_512_to_1023, TX_512_TO_1023_PKTS);
+	MAC_STAT(tx_1024_to_15xx, TX_1024_TO_15XX_PKTS);
+	MAC_STAT(tx_15xx_to_jumbo, TX_15XX_TO_JUMBO_PKTS);
+	MAC_STAT(tx_gtjumbo, TX_GTJUMBO_PKTS);
+	mac_stats->tx_collision = 0;
+	MAC_STAT(tx_single_collision, TX_SINGLE_COLLISION_PKTS);
+	MAC_STAT(tx_multiple_collision, TX_MULTIPLE_COLLISION_PKTS);
+	MAC_STAT(tx_excessive_collision, TX_EXCESSIVE_COLLISION_PKTS);
+	MAC_STAT(tx_deferred, TX_DEFERRED_PKTS);
+	MAC_STAT(tx_late_collision, TX_LATE_COLLISION_PKTS);
+	mac_stats->tx_collision = (mac_stats->tx_single_collision +
+				   mac_stats->tx_multiple_collision +
+				   mac_stats->tx_excessive_collision +
+				   mac_stats->tx_late_collision);
+	MAC_STAT(tx_excessive_deferred, TX_EXCESSIVE_DEFERRED_PKTS);
+	MAC_STAT(tx_non_tcpudp, TX_NON_TCPUDP_PKTS);
+	MAC_STAT(tx_mac_src_error, TX_MAC_SRC_ERR_PKTS);
+	MAC_STAT(tx_ip_src_error, TX_IP_SRC_ERR_PKTS);
+	MAC_STAT(rx_bytes, RX_BYTES);
+	MAC_STAT(rx_bad_bytes, RX_BAD_BYTES);
+	mac_stats->rx_good_bytes = (mac_stats->rx_bytes -
+				    mac_stats->rx_bad_bytes);
+	MAC_STAT(rx_packets, RX_PKTS);
+	MAC_STAT(rx_good, RX_GOOD_PKTS);
+	mac_stats->rx_bad = mac_stats->rx_packets - mac_stats->rx_good;
+	MAC_STAT(rx_pause, RX_PAUSE_PKTS);
+	MAC_STAT(rx_control, RX_CONTROL_PKTS);
+	MAC_STAT(rx_unicast, RX_UNICAST_PKTS);
+	MAC_STAT(rx_multicast, RX_MULTICAST_PKTS);
+	MAC_STAT(rx_broadcast, RX_BROADCAST_PKTS);
+	MAC_STAT(rx_lt64, RX_UNDERSIZE_PKTS);
+	MAC_STAT(rx_64, RX_64_PKTS);
+	MAC_STAT(rx_65_to_127, RX_65_TO_127_PKTS);
+	MAC_STAT(rx_128_to_255, RX_128_TO_255_PKTS);
+	MAC_STAT(rx_256_to_511, RX_256_TO_511_PKTS);
+	MAC_STAT(rx_512_to_1023, RX_512_TO_1023_PKTS);
+	MAC_STAT(rx_1024_to_15xx, RX_1024_TO_15XX_PKTS);
+	MAC_STAT(rx_15xx_to_jumbo, RX_15XX_TO_JUMBO_PKTS);
+	MAC_STAT(rx_gtjumbo, RX_GTJUMBO_PKTS);
+	mac_stats->rx_bad_lt64 = 0;
+	mac_stats->rx_bad_64_to_15xx = 0;
+	mac_stats->rx_bad_15xx_to_jumbo = 0;
+	MAC_STAT(rx_bad_gtjumbo, RX_JABBER_PKTS);
+	MAC_STAT(rx_overflow, RX_OVERFLOW_PKTS);
+	mac_stats->rx_missed = 0;
+	MAC_STAT(rx_false_carrier, RX_FALSE_CARRIER_PKTS);
+	MAC_STAT(rx_symbol_error, RX_SYMBOL_ERROR_PKTS);
+	MAC_STAT(rx_align_error, RX_ALIGN_ERROR_PKTS);
+	MAC_STAT(rx_length_error, RX_LENGTH_ERROR_PKTS);
+	MAC_STAT(rx_internal_error, RX_INTERNAL_ERROR_PKTS);
+	mac_stats->rx_good_lt64 = 0;
+
+	efx->n_rx_nodesc_drop_cnt = dma_stats[MC_CMD_MAC_RX_NODESC_DROPS];
+
+#undef MAC_STAT
+
+	rmb();
+	generation_start = dma_stats[MC_CMD_MAC_GENERATION_START];
+	if (generation_end != generation_start)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static void siena_update_nic_stats(struct efx_nic *efx)
+{
+	while (siena_try_update_nic_stats(efx) == -EAGAIN)
+		cpu_relax();
+}
+
+static void siena_start_nic_stats(struct efx_nic *efx)
+{
+	u64 *dma_stats = (u64 *)efx->stats_buffer.addr;
+
+	dma_stats[MC_CMD_MAC_GENERATION_END] = STATS_GENERATION_INVALID;
+
+	efx_mcdi_mac_stats(efx, efx->stats_buffer.dma_addr,
+			   MC_CMD_MAC_NSTATS * sizeof(u64), 1, 0);
+}
+
+static void siena_stop_nic_stats(struct efx_nic *efx)
+{
+	efx_mcdi_mac_stats(efx, efx->stats_buffer.dma_addr, 0, 0, 0);
+}
+
+void siena_print_fwver(struct efx_nic *efx, char *buf, size_t len)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+	snprintf(buf, len, "%u.%u.%u.%u",
+		 (unsigned int)(nic_data->fw_version >> 48),
+		 (unsigned int)(nic_data->fw_version >> 32 & 0xffff),
+		 (unsigned int)(nic_data->fw_version >> 16 & 0xffff),
+		 (unsigned int)(nic_data->fw_version & 0xffff));
+}
+
+/**************************************************************************
+ *
+ * Wake on LAN
+ *
+ **************************************************************************
+ */
+
+static void siena_get_wol(struct efx_nic *efx, struct ethtool_wolinfo *wol)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+
+	wol->supported = WAKE_MAGIC;
+	if (nic_data->wol_filter_id != -1)
+		wol->wolopts = WAKE_MAGIC;
+	else
+		wol->wolopts = 0;
+	memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+
+static int siena_set_wol(struct efx_nic *efx, u32 type)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+	int rc;
+
+	if (type & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	if (type & WAKE_MAGIC) {
+		if (nic_data->wol_filter_id != -1)
+			efx_mcdi_wol_filter_remove(efx,
+						   nic_data->wol_filter_id);
+		rc = efx_mcdi_wol_filter_set_magic(efx, efx->mac_address,
+						   &nic_data->wol_filter_id);
+		if (rc)
+			goto fail;
+
+		pci_wake_from_d3(efx->pci_dev, true);
+	} else {
+		rc = efx_mcdi_wol_filter_reset(efx);
+		nic_data->wol_filter_id = -1;
+		pci_wake_from_d3(efx->pci_dev, false);
+		if (rc)
+			goto fail;
+	}
+
+	return 0;
+ fail:
+	EFX_ERR(efx, "%s failed: type=%d rc=%d\n", __func__, type, rc);
+	return rc;
+}
+
+
+static void siena_init_wol(struct efx_nic *efx)
+{
+	struct siena_nic_data *nic_data = efx->nic_data;
+	int rc;
+
+	rc = efx_mcdi_wol_filter_get_magic(efx, &nic_data->wol_filter_id);
+
+	if (rc != 0) {
+		/* If it failed, attempt to get into a synchronised
+		 * state with MC by resetting any set WoL filters */
+		efx_mcdi_wol_filter_reset(efx);
+		nic_data->wol_filter_id = -1;
+	} else if (nic_data->wol_filter_id != -1) {
+		pci_wake_from_d3(efx->pci_dev, true);
+	}
+}
+
+
+/**************************************************************************
+ *
+ * Revision-dependent attributes used by efx.c and nic.c
+ *
+ **************************************************************************
+ */
+
+struct efx_nic_type siena_a0_nic_type = {
+	.probe = siena_probe_nic,
+	.remove = siena_remove_nic,
+	.init = siena_init_nic,
+	.fini = efx_port_dummy_op_void,
+	.monitor = NULL,
+	.reset = siena_reset_hw,
+	.probe_port = siena_probe_port,
+	.remove_port = siena_remove_port,
+	.prepare_flush = efx_port_dummy_op_void,
+	.update_stats = siena_update_nic_stats,
+	.start_stats = siena_start_nic_stats,
+	.stop_stats = siena_stop_nic_stats,
+	.set_id_led = efx_mcdi_set_id_led,
+	.push_irq_moderation = siena_push_irq_moderation,
+	.push_multicast_hash = siena_push_multicast_hash,
+	.reconfigure_port = efx_mcdi_phy_reconfigure,
+	.get_wol = siena_get_wol,
+	.set_wol = siena_set_wol,
+	.resume_wol = siena_init_wol,
+	.test_registers = siena_test_registers,
+	.default_mac_ops = &efx_mcdi_mac_operations,
+
+	.revision = EFX_REV_SIENA_A0,
+	.mem_map_size = (FR_CZ_MC_TREG_SMEM +
+			 FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS),
+	.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
+	.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
+	.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
+	.evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL,
+	.evq_rptr_tbl_base = FR_BZ_EVQ_RPTR,
+	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
+	.rx_buffer_padding = 0,
+	.max_interrupt_mode = EFX_INT_MODE_MSIX,
+	.phys_addr_channels = 32, /* Hardware limit is 64, but the legacy
+				   * interrupt handler only supports 32
+				   * channels */
+	.tx_dc_base = 0x88000,
+	.rx_dc_base = 0x68000,
+	.offload_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM,
+	.reset_world_flags = ETH_RESET_MGMT << ETH_RESET_SHARED_SHIFT,
+};
diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h
index 1b1ceb4..8bf4fce 100644
--- a/drivers/net/sfc/spi.h
+++ b/drivers/net/sfc/spi.h
@@ -36,8 +36,6 @@
 
 /**
  * struct efx_spi_device - an Efx SPI (Serial Peripheral Interface) device
- * @efx:		The Efx controller that owns this device
- * @mtd:		MTD state
  * @device_id:		Controller's id for the device
  * @size:		Size (in bytes)
  * @addr_len:		Number of address bytes in read/write commands
@@ -54,10 +52,6 @@
  *	Write commands are limited to blocks with this size and alignment.
  */
 struct efx_spi_device {
-	struct efx_nic *efx;
-#ifdef CONFIG_SFC_MTD
-	void *mtd;
-#endif
 	int device_id;
 	unsigned int size;
 	unsigned int addr_len;
@@ -67,12 +61,16 @@
 	unsigned int block_size;
 };
 
-int falcon_spi_cmd(const struct efx_spi_device *spi, unsigned int command,
+int falcon_spi_cmd(struct efx_nic *efx,
+		   const struct efx_spi_device *spi, unsigned int command,
 		   int address, const void* in, void *out, size_t len);
-int falcon_spi_wait_write(const struct efx_spi_device *spi);
-int falcon_spi_read(const struct efx_spi_device *spi, loff_t start,
+int falcon_spi_wait_write(struct efx_nic *efx,
+			  const struct efx_spi_device *spi);
+int falcon_spi_read(struct efx_nic *efx,
+		    const struct efx_spi_device *spi, loff_t start,
 		    size_t len, size_t *retlen, u8 *buffer);
-int falcon_spi_write(const struct efx_spi_device *spi, loff_t start,
+int falcon_spi_write(struct efx_nic *efx,
+		     const struct efx_spi_device *spi, loff_t start,
 		     size_t len, size_t *retlen, const u8 *buffer);
 
 /*
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index f4d5090..ca11572 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -1,6 +1,6 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
+ * Copyright 2007-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -12,10 +12,9 @@
 #include <linux/seq_file.h>
 #include "efx.h"
 #include "mdio_10g.h"
-#include "falcon.h"
+#include "nic.h"
 #include "phy.h"
-#include "falcon_hwdefs.h"
-#include "boards.h"
+#include "regs.h"
 #include "workarounds.h"
 #include "selftest.h"
 
@@ -31,13 +30,13 @@
 #define SFX7101_LOOPBACKS ((1 << LOOPBACK_PHYXS) |	\
 			   (1 << LOOPBACK_PCS) |	\
 			   (1 << LOOPBACK_PMAPMD) |	\
-			   (1 << LOOPBACK_NETWORK))
+			   (1 << LOOPBACK_PHYXS_WS))
 
 #define SFT9001_LOOPBACKS ((1 << LOOPBACK_GPHY) |	\
 			   (1 << LOOPBACK_PHYXS) |	\
 			   (1 << LOOPBACK_PCS) |	\
 			   (1 << LOOPBACK_PMAPMD) |	\
-			   (1 << LOOPBACK_NETWORK))
+			   (1 << LOOPBACK_PHYXS_WS))
 
 /* We complain if we fail to see the link partner as 10G capable this many
  * times in a row (must be > 1 as sampling the autoneg. registers is racy)
@@ -84,9 +83,9 @@
 #define PMA_PMD_LED_FLASH	(3)
 #define PMA_PMD_LED_MASK	3
 /* All LEDs under hardware control */
-#define PMA_PMD_LED_FULL_AUTO	(0)
+#define SFT9001_PMA_PMD_LED_DEFAULT 0
 /* Green and Amber under hardware control, Red off */
-#define PMA_PMD_LED_DEFAULT	(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
+#define SFX7101_PMA_PMD_LED_DEFAULT (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
 
 #define PMA_PMD_SPEED_ENABLE_REG 49192
 #define PMA_PMD_100TX_ADV_LBN    1
@@ -200,15 +199,16 @@
 				   const char *buf, size_t count)
 {
 	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+	int rc;
 
 	rtnl_lock();
 	efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, MDIO_PMA_10GBT_TXPWR,
 			  MDIO_PMA_10GBT_TXPWR_SHORT,
 			  count != 0 && *buf != '0');
-	efx_reconfigure_port(efx);
+	rc = efx_reconfigure_port(efx);
 	rtnl_unlock();
 
-	return count;
+	return rc < 0 ? rc : (ssize_t)count;
 }
 
 static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach,
@@ -292,17 +292,36 @@
 		efx_mdio_set_flag(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG,
 				  1 << PMA_PMA_LED_ACTIVITY_LBN, true);
 		efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG,
-			       PMA_PMD_LED_DEFAULT);
+			       SFX7101_PMA_PMD_LED_DEFAULT);
 	}
 
 	return 0;
 }
 
+static int sfx7101_phy_probe(struct efx_nic *efx)
+{
+	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->loopback_modes = SFX7101_LOOPBACKS | FALCON_XMAC_LOOPBACKS;
+	return 0;
+}
+
+static int sft9001_phy_probe(struct efx_nic *efx)
+{
+	efx->mdio.mmds = TENXPRESS_REQUIRED_DEVS;
+	efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+	efx->loopback_modes = (SFT9001_LOOPBACKS | FALCON_XMAC_LOOPBACKS |
+			       FALCON_GMAC_LOOPBACKS);
+	return 0;
+}
+
 static int tenxpress_phy_init(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data;
 	int rc = 0;
 
+	falcon_board(efx)->type->init_phy(efx);
+
 	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
 	if (!phy_data)
 		return -ENOMEM;
@@ -333,6 +352,15 @@
 	if (rc < 0)
 		goto fail;
 
+	/* Initialise advertising flags */
+	efx->link_advertising = (ADVERTISED_TP | ADVERTISED_Autoneg |
+				  ADVERTISED_10000baseT_Full);
+	if (efx->phy_type != PHY_TYPE_SFX7101)
+		efx->link_advertising |= (ADVERTISED_1000baseT_Full |
+					   ADVERTISED_100baseT_Full);
+	efx_link_set_wanted_fc(efx, efx->wanted_fc);
+	efx_mdio_an_reconfigure(efx);
+
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
 					&dev_attr_phy_short_reach);
@@ -363,7 +391,7 @@
 	/* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so
 	 * a special software reset can glitch the XGMAC sufficiently for stats
 	 * requests to fail. */
-	efx_stats_disable(efx);
+	falcon_stop_nic_stats(efx);
 
 	/* Initiate reset */
 	reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG);
@@ -385,7 +413,7 @@
 	/* Wait for the XGXS state machine to churn */
 	mdelay(10);
 out:
-	efx_stats_enable(efx);
+	falcon_start_nic_stats(efx);
 	return rc;
 }
 
@@ -489,95 +517,76 @@
 			!!(efx->phy_mode & PHY_MODE_LOW_POWER));
 }
 
-static void tenxpress_phy_reconfigure(struct efx_nic *efx)
+static int tenxpress_phy_reconfigure(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data = efx->phy_data;
-	struct ethtool_cmd ecmd;
 	bool phy_mode_change, loop_reset;
 
 	if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) {
 		phy_data->phy_mode = efx->phy_mode;
-		return;
+		return 0;
 	}
 
-	tenxpress_low_power(efx);
-
 	phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL &&
 			   phy_data->phy_mode != PHY_MODE_NORMAL);
-	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) ||
+	loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, LOOPBACKS_EXTERNAL(efx)) ||
 		      LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY));
 
 	if (loop_reset || phy_mode_change) {
-		int rc;
+		tenxpress_special_reset(efx);
 
-		efx->phy_op->get_settings(efx, &ecmd);
-
-		if (loop_reset || phy_mode_change) {
-			tenxpress_special_reset(efx);
-
-			/* Reset XAUI if we were in 10G, and are staying
-			 * in 10G. If we're moving into and out of 10G
-			 * then xaui will be reset anyway */
-			if (EFX_IS10G(efx))
-				falcon_reset_xaui(efx);
-		}
-
-		rc = efx->phy_op->set_settings(efx, &ecmd);
-		WARN_ON(rc);
+		/* Reset XAUI if we were in 10G, and are staying
+		 * in 10G. If we're moving into and out of 10G
+		 * then xaui will be reset anyway */
+		if (EFX_IS10G(efx))
+			falcon_reset_xaui(efx);
 	}
 
+	tenxpress_low_power(efx);
 	efx_mdio_transmit_disable(efx);
 	efx_mdio_phy_reconfigure(efx);
 	tenxpress_ext_loopback(efx);
+	efx_mdio_an_reconfigure(efx);
 
 	phy_data->loopback_mode = efx->loopback_mode;
 	phy_data->phy_mode = efx->phy_mode;
 
-	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		efx->link_speed = 10000;
-		efx->link_fd = true;
-		efx->link_up = sfx7101_link_ok(efx);
-	} else {
-		efx->phy_op->get_settings(efx, &ecmd);
-		efx->link_speed = ecmd.speed;
-		efx->link_fd = ecmd.duplex == DUPLEX_FULL;
-		efx->link_up = sft9001_link_ok(efx, &ecmd);
-	}
-	efx->link_fc = efx_mdio_get_pause(efx);
+	return 0;
 }
 
-/* Poll PHY for interrupt */
-static void tenxpress_phy_poll(struct efx_nic *efx)
+static void
+tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd);
+
+/* Poll for link state changes */
+static bool tenxpress_phy_poll(struct efx_nic *efx)
 {
-	struct tenxpress_phy_data *phy_data = efx->phy_data;
-	bool change = false;
+	struct efx_link_state old_state = efx->link_state;
 
 	if (efx->phy_type == PHY_TYPE_SFX7101) {
-		bool link_ok = sfx7101_link_ok(efx);
-		if (link_ok != efx->link_up) {
-			change = true;
-		} else {
-			unsigned int link_fc = efx_mdio_get_pause(efx);
-			if (link_fc != efx->link_fc)
-				change = true;
-		}
-		sfx7101_check_bad_lp(efx, link_ok);
-	} else if (efx->loopback_mode) {
-		bool link_ok = sft9001_link_ok(efx, NULL);
-		if (link_ok != efx->link_up)
-			change = true;
+		efx->link_state.up = sfx7101_link_ok(efx);
+		efx->link_state.speed = 10000;
+		efx->link_state.fd = true;
+		efx->link_state.fc = efx_mdio_get_pause(efx);
+
+		sfx7101_check_bad_lp(efx, efx->link_state.up);
 	} else {
-		int status = efx_mdio_read(efx, MDIO_MMD_PMAPMD,
-					   MDIO_PMA_LASI_STAT);
-		if (status & MDIO_PMA_LASI_LSALARM)
-			change = true;
+		struct ethtool_cmd ecmd;
+
+		/* Check the LASI alarm first */
+		if (efx->loopback_mode == LOOPBACK_NONE &&
+		    !(efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT) &
+		      MDIO_PMA_LASI_LSALARM))
+			return false;
+
+		tenxpress_get_settings(efx, &ecmd);
+
+		efx->link_state.up = sft9001_link_ok(efx, &ecmd);
+		efx->link_state.speed = ecmd.speed;
+		efx->link_state.fd = (ecmd.duplex == DUPLEX_FULL);
+		efx->link_state.fc = efx_mdio_get_pause(efx);
 	}
 
-	if (change)
-		falcon_sim_phy_event(efx);
-
-	if (phy_data->phy_mode != PHY_MODE_NORMAL)
-		return;
+	return !efx_link_state_equal(&efx->link_state, &old_state);
 }
 
 static void tenxpress_phy_fini(struct efx_nic *efx)
@@ -604,18 +613,29 @@
 }
 
 
-/* Set the RX and TX LEDs and Link LED flashing. The other LEDs
- * (which probably aren't wired anyway) are left in AUTO mode */
-void tenxpress_phy_blink(struct efx_nic *efx, bool blink)
+/* Override the RX, TX and link LEDs */
+void tenxpress_set_id_led(struct efx_nic *efx, enum efx_led_mode mode)
 {
 	int reg;
 
-	if (blink)
-		reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) |
-			(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) |
-			(PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN);
-	else
-		reg = PMA_PMD_LED_DEFAULT;
+	switch (mode) {
+	case EFX_LED_OFF:
+		reg = (PMA_PMD_LED_OFF << PMA_PMD_LED_TX_LBN) |
+			(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN) |
+			(PMA_PMD_LED_OFF << PMA_PMD_LED_LINK_LBN);
+		break;
+	case EFX_LED_ON:
+		reg = (PMA_PMD_LED_ON << PMA_PMD_LED_TX_LBN) |
+			(PMA_PMD_LED_ON << PMA_PMD_LED_RX_LBN) |
+			(PMA_PMD_LED_ON << PMA_PMD_LED_LINK_LBN);
+		break;
+	default:
+		if (efx->phy_type == PHY_TYPE_SFX7101)
+			reg = SFX7101_PMA_PMD_LED_DEFAULT;
+		else
+			reg = SFT9001_PMA_PMD_LED_DEFAULT;
+		break;
+	}
 
 	efx_mdio_write(efx, MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG, reg);
 }
@@ -624,6 +644,13 @@
 	"bist"
 };
 
+static const char *sfx7101_test_name(struct efx_nic *efx, unsigned int index)
+{
+	if (index < ARRAY_SIZE(sfx7101_test_names))
+		return sfx7101_test_names[index];
+	return NULL;
+}
+
 static int
 sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 {
@@ -635,6 +662,9 @@
 	/* BIST is automatically run after a special software reset */
 	rc = tenxpress_special_reset(efx);
 	results[0] = rc ? -1 : 1;
+
+	efx_mdio_an_reconfigure(efx);
+
 	return rc;
 }
 
@@ -650,14 +680,17 @@
 	"cable.pairD.length",
 };
 
+static const char *sft9001_test_name(struct efx_nic *efx, unsigned int index)
+{
+	if (index < ARRAY_SIZE(sft9001_test_names))
+		return sft9001_test_names[index];
+	return NULL;
+}
+
 static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
 {
-	struct ethtool_cmd ecmd;
 	int rc = 0, rc2, i, ctrl_reg, res_reg;
 
-	if (flags & ETH_TEST_FL_OFFLINE)
-		efx->phy_op->get_settings(efx, &ecmd);
-
 	/* Initialise cable diagnostic results to unknown failure */
 	for (i = 1; i < 9; ++i)
 		results[i] = -1;
@@ -709,9 +742,7 @@
 		if (!rc)
 			rc = rc2;
 
-		rc2 = efx->phy_op->set_settings(efx, &ecmd);
-		if (!rc)
-			rc = rc2;
+		efx_mdio_an_reconfigure(efx);
 	}
 
 	return rc;
@@ -758,7 +789,7 @@
 	 * but doesn't advertise the correct speed. So override it */
 	if (efx->loopback_mode == LOOPBACK_GPHY)
 		ecmd->speed = SPEED_1000;
-	else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
+	else if (LOOPBACK_EXTERNAL(efx))
 		ecmd->speed = SPEED_10000;
 }
 
@@ -788,35 +819,27 @@
 }
 
 struct efx_phy_operations falcon_sfx7101_phy_ops = {
-	.macs		  = EFX_XMAC,
+	.probe		  = sfx7101_phy_probe,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
-	.clear_interrupt  = efx_port_dummy_op_void,
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sfx7101_set_npage_adv,
-	.num_tests	  = ARRAY_SIZE(sfx7101_test_names),
-	.test_names	  = sfx7101_test_names,
+	.test_name	  = sfx7101_test_name,
 	.run_tests	  = sfx7101_run_tests,
-	.mmds             = TENXPRESS_REQUIRED_DEVS,
-	.loopbacks        = SFX7101_LOOPBACKS,
 };
 
 struct efx_phy_operations falcon_sft9001_phy_ops = {
-	.macs		  = EFX_GMAC | EFX_XMAC,
+	.probe		  = sft9001_phy_probe,
 	.init             = tenxpress_phy_init,
 	.reconfigure      = tenxpress_phy_reconfigure,
 	.poll             = tenxpress_phy_poll,
 	.fini             = tenxpress_phy_fini,
-	.clear_interrupt  = efx_port_dummy_op_void,
 	.get_settings	  = tenxpress_get_settings,
 	.set_settings	  = tenxpress_set_settings,
 	.set_npage_adv    = sft9001_set_npage_adv,
-	.num_tests	  = ARRAY_SIZE(sft9001_test_names),
-	.test_names	  = sft9001_test_names,
+	.test_name	  = sft9001_test_name,
 	.run_tests	  = sft9001_run_tests,
-	.mmds             = TENXPRESS_REQUIRED_DEVS,
-	.loopbacks        = SFT9001_LOOPBACKS,
 };
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 489c4de..e669f94 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -1,7 +1,7 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
  * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2005-2008 Solarflare Communications Inc.
+ * Copyright 2005-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -12,12 +12,13 @@
 #include <linux/tcp.h>
 #include <linux/ip.h>
 #include <linux/in.h>
+#include <linux/ipv6.h>
+#include <net/ipv6.h>
 #include <linux/if_ether.h>
 #include <linux/highmem.h>
 #include "net_driver.h"
-#include "tx.h"
 #include "efx.h"
-#include "falcon.h"
+#include "nic.h"
 #include "workarounds.h"
 
 /*
@@ -26,8 +27,7 @@
  * The tx_queue descriptor ring fill-level must fall below this value
  * before we restart the netif queue
  */
-#define EFX_NETDEV_TX_THRESHOLD(_tx_queue)	\
-	(_tx_queue->efx->type->txd_ring_mask / 2u)
+#define EFX_TXQ_THRESHOLD (EFX_TXQ_MASK / 2u)
 
 /* We want to be able to nest calls to netif_stop_queue(), since each
  * channel can have an individual stop on the queue.
@@ -125,6 +125,24 @@
 }
 
 
+static inline unsigned
+efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr)
+{
+	/* Depending on the NIC revision, we can use descriptor
+	 * lengths up to 8K or 8K-1.  However, since PCI Express
+	 * devices must split read requests at 4K boundaries, there is
+	 * little benefit from using descriptors that cross those
+	 * boundaries and we keep things simple by not doing so.
+	 */
+	unsigned len = (~dma_addr & 0xfff) + 1;
+
+	/* Work around hardware bug for unaligned buffers. */
+	if (EFX_WORKAROUND_5391(efx) && (dma_addr & 0xf))
+		len = min_t(unsigned, len, 512 - (dma_addr & 0xf));
+
+	return len;
+}
+
 /*
  * Add a socket buffer to a TX queue
  *
@@ -135,11 +153,13 @@
  * If any DMA mapping fails, any mapped fragments will be unmapped,
  * the queue's insert pointer will be restored to its original value.
  *
+ * This function is split out from efx_hard_start_xmit to allow the
+ * loopback test to direct packets via specific TX queues.
+ *
  * Returns NETDEV_TX_OK or NETDEV_TX_BUSY
  * You must hold netif_tx_lock() to call this function.
  */
-static netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue,
-					 struct sk_buff *skb)
+netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 {
 	struct efx_nic *efx = tx_queue->efx;
 	struct pci_dev *pci_dev = efx->pci_dev;
@@ -147,7 +167,7 @@
 	skb_frag_t *fragment;
 	struct page *page;
 	int page_offset;
-	unsigned int len, unmap_len = 0, fill_level, insert_ptr, misalign;
+	unsigned int len, unmap_len = 0, fill_level, insert_ptr;
 	dma_addr_t dma_addr, unmap_addr = 0;
 	unsigned int dma_len;
 	bool unmap_single;
@@ -156,7 +176,7 @@
 
 	EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count);
 
-	if (skb_shinfo((struct sk_buff *)skb)->gso_size)
+	if (skb_shinfo(skb)->gso_size)
 		return efx_enqueue_skb_tso(tx_queue, skb);
 
 	/* Get size of the initial fragment */
@@ -171,7 +191,7 @@
 	}
 
 	fill_level = tx_queue->insert_count - tx_queue->old_read_count;
-	q_space = efx->type->txd_ring_mask - 1 - fill_level;
+	q_space = EFX_TXQ_MASK - 1 - fill_level;
 
 	/* Map for DMA.  Use pci_map_single rather than pci_map_page
 	 * since this is more efficient on machines with sparse
@@ -208,16 +228,14 @@
 					&tx_queue->read_count;
 				fill_level = (tx_queue->insert_count
 					      - tx_queue->old_read_count);
-				q_space = (efx->type->txd_ring_mask - 1 -
-					   fill_level);
+				q_space = EFX_TXQ_MASK - 1 - fill_level;
 				if (unlikely(q_space-- <= 0))
 					goto stop;
 				smp_mb();
 				--tx_queue->stopped;
 			}
 
-			insert_ptr = (tx_queue->insert_count &
-				      efx->type->txd_ring_mask);
+			insert_ptr = tx_queue->insert_count & EFX_TXQ_MASK;
 			buffer = &tx_queue->buffer[insert_ptr];
 			efx_tsoh_free(tx_queue, buffer);
 			EFX_BUG_ON_PARANOID(buffer->tsoh);
@@ -226,14 +244,10 @@
 			EFX_BUG_ON_PARANOID(!buffer->continuation);
 			EFX_BUG_ON_PARANOID(buffer->unmap_len);
 
-			dma_len = (((~dma_addr) & efx->type->tx_dma_mask) + 1);
-			if (likely(dma_len > len))
+			dma_len = efx_max_tx_len(efx, dma_addr);
+			if (likely(dma_len >= len))
 				dma_len = len;
 
-			misalign = (unsigned)dma_addr & efx->type->bug5391_mask;
-			if (misalign && dma_len + misalign > 512)
-				dma_len = 512 - misalign;
-
 			/* Fill out per descriptor fields */
 			buffer->len = dma_len;
 			buffer->dma_addr = dma_addr;
@@ -266,7 +280,7 @@
 	buffer->continuation = false;
 
 	/* Pass off to hardware */
-	falcon_push_buffers(tx_queue);
+	efx_nic_push_buffers(tx_queue);
 
 	return NETDEV_TX_OK;
 
@@ -276,7 +290,7 @@
 		   skb_shinfo(skb)->nr_frags + 1);
 
 	/* Mark the packet as transmitted, and free the SKB ourselves */
-	dev_kfree_skb_any((struct sk_buff *)skb);
+	dev_kfree_skb_any(skb);
 	goto unwind;
 
  stop:
@@ -289,7 +303,7 @@
 	/* Work backwards until we hit the original insert pointer value */
 	while (tx_queue->insert_count != tx_queue->write_count) {
 		--tx_queue->insert_count;
-		insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask;
+		insert_ptr = tx_queue->insert_count & EFX_TXQ_MASK;
 		buffer = &tx_queue->buffer[insert_ptr];
 		efx_dequeue_buffer(tx_queue, buffer);
 		buffer->len = 0;
@@ -318,10 +332,9 @@
 {
 	struct efx_nic *efx = tx_queue->efx;
 	unsigned int stop_index, read_ptr;
-	unsigned int mask = tx_queue->efx->type->txd_ring_mask;
 
-	stop_index = (index + 1) & mask;
-	read_ptr = tx_queue->read_count & mask;
+	stop_index = (index + 1) & EFX_TXQ_MASK;
+	read_ptr = tx_queue->read_count & EFX_TXQ_MASK;
 
 	while (read_ptr != stop_index) {
 		struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr];
@@ -338,28 +351,10 @@
 		buffer->len = 0;
 
 		++tx_queue->read_count;
-		read_ptr = tx_queue->read_count & mask;
+		read_ptr = tx_queue->read_count & EFX_TXQ_MASK;
 	}
 }
 
-/* Initiate a packet transmission on the specified TX queue.
- * Note that returning anything other than NETDEV_TX_OK will cause the
- * OS to free the skb.
- *
- * This function is split out from efx_hard_start_xmit to allow the
- * loopback test to direct packets via specific TX queues.  It is
- * therefore a non-static inline, so as not to penalise performance
- * for non-loopback transmissions.
- *
- * Context: netif_tx_lock held
- */
-inline netdev_tx_t efx_xmit(struct efx_nic *efx,
-			   struct efx_tx_queue *tx_queue, struct sk_buff *skb)
-{
-	/* Map fragments for DMA and add to TX queue */
-	return efx_enqueue_skb(tx_queue, skb);
-}
-
 /* Initiate a packet transmission.  We use one channel per CPU
  * (sharing when we have more CPUs than channels).  On Falcon, the TX
  * completion events will be directed back to the CPU that transmitted
@@ -383,7 +378,7 @@
 	else
 		tx_queue = &efx->tx_queue[EFX_TX_QUEUE_NO_CSUM];
 
-	return efx_xmit(efx, tx_queue, skb);
+	return efx_enqueue_skb(tx_queue, skb);
 }
 
 void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index)
@@ -391,7 +386,7 @@
 	unsigned fill_level;
 	struct efx_nic *efx = tx_queue->efx;
 
-	EFX_BUG_ON_PARANOID(index > efx->type->txd_ring_mask);
+	EFX_BUG_ON_PARANOID(index > EFX_TXQ_MASK);
 
 	efx_dequeue_buffers(tx_queue, index);
 
@@ -401,7 +396,7 @@
 	smp_mb();
 	if (unlikely(tx_queue->stopped) && likely(efx->port_enabled)) {
 		fill_level = tx_queue->insert_count - tx_queue->read_count;
-		if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
+		if (fill_level < EFX_TXQ_THRESHOLD) {
 			EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
 
 			/* Do this under netif_tx_lock(), to avoid racing
@@ -425,15 +420,15 @@
 	EFX_LOG(efx, "creating TX queue %d\n", tx_queue->queue);
 
 	/* Allocate software ring */
-	txq_size = (efx->type->txd_ring_mask + 1) * sizeof(*tx_queue->buffer);
+	txq_size = EFX_TXQ_SIZE * sizeof(*tx_queue->buffer);
 	tx_queue->buffer = kzalloc(txq_size, GFP_KERNEL);
 	if (!tx_queue->buffer)
 		return -ENOMEM;
-	for (i = 0; i <= efx->type->txd_ring_mask; ++i)
+	for (i = 0; i <= EFX_TXQ_MASK; ++i)
 		tx_queue->buffer[i].continuation = true;
 
 	/* Allocate hardware ring */
-	rc = falcon_probe_tx(tx_queue);
+	rc = efx_nic_probe_tx(tx_queue);
 	if (rc)
 		goto fail;
 
@@ -456,7 +451,7 @@
 	BUG_ON(tx_queue->stopped);
 
 	/* Set up TX descriptor ring */
-	falcon_init_tx(tx_queue);
+	efx_nic_init_tx(tx_queue);
 }
 
 void efx_release_tx_buffers(struct efx_tx_queue *tx_queue)
@@ -468,8 +463,7 @@
 
 	/* Free any buffers left in the ring */
 	while (tx_queue->read_count != tx_queue->write_count) {
-		buffer = &tx_queue->buffer[tx_queue->read_count &
-					   tx_queue->efx->type->txd_ring_mask];
+		buffer = &tx_queue->buffer[tx_queue->read_count & EFX_TXQ_MASK];
 		efx_dequeue_buffer(tx_queue, buffer);
 		buffer->continuation = true;
 		buffer->len = 0;
@@ -483,7 +477,7 @@
 	EFX_LOG(tx_queue->efx, "shutting down TX queue %d\n", tx_queue->queue);
 
 	/* Flush TX queue, remove descriptor ring */
-	falcon_fini_tx(tx_queue);
+	efx_nic_fini_tx(tx_queue);
 
 	efx_release_tx_buffers(tx_queue);
 
@@ -500,7 +494,7 @@
 void efx_remove_tx_queue(struct efx_tx_queue *tx_queue)
 {
 	EFX_LOG(tx_queue->efx, "destroying TX queue %d\n", tx_queue->queue);
-	falcon_remove_tx(tx_queue);
+	efx_nic_remove_tx(tx_queue);
 
 	kfree(tx_queue->buffer);
 	tx_queue->buffer = NULL;
@@ -539,6 +533,7 @@
 #define ETH_HDR_LEN(skb)  (skb_network_header(skb) - (skb)->data)
 #define SKB_TCP_OFF(skb)  PTR_DIFF(tcp_hdr(skb), (skb)->data)
 #define SKB_IPV4_OFF(skb) PTR_DIFF(ip_hdr(skb), (skb)->data)
+#define SKB_IPV6_OFF(skb) PTR_DIFF(ipv6_hdr(skb), (skb)->data)
 
 /**
  * struct tso_state - TSO state for an SKB
@@ -551,6 +546,7 @@
  * @unmap_len: Length of SKB fragment
  * @unmap_addr: DMA address of SKB fragment
  * @unmap_single: DMA single vs page mapping flag
+ * @protocol: Network protocol (after any VLAN header)
  * @header_len: Number of bytes of header
  * @full_packet_size: Number of bytes to put in each outgoing segment
  *
@@ -571,6 +567,7 @@
 	dma_addr_t unmap_addr;
 	bool unmap_single;
 
+	__be16 protocol;
 	unsigned header_len;
 	int full_packet_size;
 };
@@ -578,9 +575,9 @@
 
 /*
  * Verify that our various assumptions about sk_buffs and the conditions
- * under which TSO will be attempted hold true.
+ * under which TSO will be attempted hold true.  Return the protocol number.
  */
-static void efx_tso_check_safe(struct sk_buff *skb)
+static __be16 efx_tso_check_protocol(struct sk_buff *skb)
 {
 	__be16 protocol = skb->protocol;
 
@@ -595,13 +592,22 @@
 		if (protocol == htons(ETH_P_IP))
 			skb_set_transport_header(skb, sizeof(*veh) +
 						 4 * ip_hdr(skb)->ihl);
+		else if (protocol == htons(ETH_P_IPV6))
+			skb_set_transport_header(skb, sizeof(*veh) +
+						 sizeof(struct ipv6hdr));
 	}
 
-	EFX_BUG_ON_PARANOID(protocol != htons(ETH_P_IP));
-	EFX_BUG_ON_PARANOID(ip_hdr(skb)->protocol != IPPROTO_TCP);
+	if (protocol == htons(ETH_P_IP)) {
+		EFX_BUG_ON_PARANOID(ip_hdr(skb)->protocol != IPPROTO_TCP);
+	} else {
+		EFX_BUG_ON_PARANOID(protocol != htons(ETH_P_IPV6));
+		EFX_BUG_ON_PARANOID(ipv6_hdr(skb)->nexthdr != NEXTHDR_TCP);
+	}
 	EFX_BUG_ON_PARANOID((PTR_DIFF(tcp_hdr(skb), skb->data)
 			     + (tcp_hdr(skb)->doff << 2u)) >
 			    skb_headlen(skb));
+
+	return protocol;
 }
 
 
@@ -708,14 +714,14 @@
 {
 	struct efx_tx_buffer *buffer;
 	struct efx_nic *efx = tx_queue->efx;
-	unsigned dma_len, fill_level, insert_ptr, misalign;
+	unsigned dma_len, fill_level, insert_ptr;
 	int q_space;
 
 	EFX_BUG_ON_PARANOID(len <= 0);
 
 	fill_level = tx_queue->insert_count - tx_queue->old_read_count;
 	/* -1 as there is no way to represent all descriptors used */
-	q_space = efx->type->txd_ring_mask - 1 - fill_level;
+	q_space = EFX_TXQ_MASK - 1 - fill_level;
 
 	while (1) {
 		if (unlikely(q_space-- <= 0)) {
@@ -731,7 +737,7 @@
 				*(volatile unsigned *)&tx_queue->read_count;
 			fill_level = (tx_queue->insert_count
 				      - tx_queue->old_read_count);
-			q_space = efx->type->txd_ring_mask - 1 - fill_level;
+			q_space = EFX_TXQ_MASK - 1 - fill_level;
 			if (unlikely(q_space-- <= 0)) {
 				*final_buffer = NULL;
 				return 1;
@@ -740,13 +746,13 @@
 			--tx_queue->stopped;
 		}
 
-		insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask;
+		insert_ptr = tx_queue->insert_count & EFX_TXQ_MASK;
 		buffer = &tx_queue->buffer[insert_ptr];
 		++tx_queue->insert_count;
 
 		EFX_BUG_ON_PARANOID(tx_queue->insert_count -
 				    tx_queue->read_count >
-				    efx->type->txd_ring_mask);
+				    EFX_TXQ_MASK);
 
 		efx_tsoh_free(tx_queue, buffer);
 		EFX_BUG_ON_PARANOID(buffer->len);
@@ -757,12 +763,7 @@
 
 		buffer->dma_addr = dma_addr;
 
-		/* Ensure we do not cross a boundary unsupported by H/W */
-		dma_len = (~dma_addr & efx->type->tx_dma_mask) + 1;
-
-		misalign = (unsigned)dma_addr & efx->type->bug5391_mask;
-		if (misalign && dma_len + misalign > 512)
-			dma_len = 512 - misalign;
+		dma_len = efx_max_tx_len(efx, dma_addr);
 
 		/* If there is enough space to send then do so */
 		if (dma_len >= len)
@@ -792,8 +793,7 @@
 {
 	struct efx_tx_buffer *buffer;
 
-	buffer = &tx_queue->buffer[tx_queue->insert_count &
-				   tx_queue->efx->type->txd_ring_mask];
+	buffer = &tx_queue->buffer[tx_queue->insert_count & EFX_TXQ_MASK];
 	efx_tsoh_free(tx_queue, buffer);
 	EFX_BUG_ON_PARANOID(buffer->len);
 	EFX_BUG_ON_PARANOID(buffer->unmap_len);
@@ -818,7 +818,7 @@
 	while (tx_queue->insert_count != tx_queue->write_count) {
 		--tx_queue->insert_count;
 		buffer = &tx_queue->buffer[tx_queue->insert_count &
-					   tx_queue->efx->type->txd_ring_mask];
+					   EFX_TXQ_MASK];
 		efx_tsoh_free(tx_queue, buffer);
 		EFX_BUG_ON_PARANOID(buffer->skb);
 		buffer->len = 0;
@@ -850,7 +850,10 @@
 			  + PTR_DIFF(tcp_hdr(skb), skb->data));
 	st->full_packet_size = st->header_len + skb_shinfo(skb)->gso_size;
 
-	st->ipv4_id = ntohs(ip_hdr(skb)->id);
+	if (st->protocol == htons(ETH_P_IP))
+		st->ipv4_id = ntohs(ip_hdr(skb)->id);
+	else
+		st->ipv4_id = 0;
 	st->seqnum = ntohl(tcp_hdr(skb)->seq);
 
 	EFX_BUG_ON_PARANOID(tcp_hdr(skb)->urg);
@@ -965,7 +968,6 @@
 				struct tso_state *st)
 {
 	struct efx_tso_header *tsoh;
-	struct iphdr *tsoh_iph;
 	struct tcphdr *tsoh_th;
 	unsigned ip_length;
 	u8 *header;
@@ -989,7 +991,6 @@
 
 	header = TSOH_BUFFER(tsoh);
 	tsoh_th = (struct tcphdr *)(header + SKB_TCP_OFF(skb));
-	tsoh_iph = (struct iphdr *)(header + SKB_IPV4_OFF(skb));
 
 	/* Copy and update the headers. */
 	memcpy(header, skb->data, st->header_len);
@@ -1007,11 +1008,22 @@
 		tsoh_th->fin = tcp_hdr(skb)->fin;
 		tsoh_th->psh = tcp_hdr(skb)->psh;
 	}
-	tsoh_iph->tot_len = htons(ip_length);
 
-	/* Linux leaves suitable gaps in the IP ID space for us to fill. */
-	tsoh_iph->id = htons(st->ipv4_id);
-	st->ipv4_id++;
+	if (st->protocol == htons(ETH_P_IP)) {
+		struct iphdr *tsoh_iph =
+			(struct iphdr *)(header + SKB_IPV4_OFF(skb));
+
+		tsoh_iph->tot_len = htons(ip_length);
+
+		/* Linux leaves suitable gaps in the IP ID space for us to fill. */
+		tsoh_iph->id = htons(st->ipv4_id);
+		st->ipv4_id++;
+	} else {
+		struct ipv6hdr *tsoh_iph =
+			(struct ipv6hdr *)(header + SKB_IPV6_OFF(skb));
+
+		tsoh_iph->payload_len = htons(ip_length - sizeof(*tsoh_iph));
+	}
 
 	st->packet_space = skb_shinfo(skb)->gso_size;
 	++tx_queue->tso_packets;
@@ -1041,8 +1053,8 @@
 	int frag_i, rc, rc2 = NETDEV_TX_OK;
 	struct tso_state state;
 
-	/* Verify TSO is safe - these checks should never fail. */
-	efx_tso_check_safe(skb);
+	/* Find the packet protocol and sanity-check it */
+	state.protocol = efx_tso_check_protocol(skb);
 
 	EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count);
 
@@ -1092,14 +1104,14 @@
 	}
 
 	/* Pass off to hardware */
-	falcon_push_buffers(tx_queue);
+	efx_nic_push_buffers(tx_queue);
 
 	tx_queue->tso_bursts++;
 	return NETDEV_TX_OK;
 
  mem_err:
 	EFX_ERR(efx, "Out of memory for TSO headers, or PCI mapping error\n");
-	dev_kfree_skb_any((struct sk_buff *)skb);
+	dev_kfree_skb_any(skb);
 	goto unwind;
 
  stop:
@@ -1135,7 +1147,7 @@
 	unsigned i;
 
 	if (tx_queue->buffer) {
-		for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i)
+		for (i = 0; i <= EFX_TXQ_MASK; ++i)
 			efx_tsoh_free(tx_queue, &tx_queue->buffer[i]);
 	}
 
diff --git a/drivers/net/sfc/tx.h b/drivers/net/sfc/tx.h
deleted file mode 100644
index e367896..0000000
--- a/drivers/net/sfc/tx.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_TX_H
-#define EFX_TX_H
-
-#include "net_driver.h"
-
-int efx_probe_tx_queue(struct efx_tx_queue *tx_queue);
-void efx_remove_tx_queue(struct efx_tx_queue *tx_queue);
-void efx_init_tx_queue(struct efx_tx_queue *tx_queue);
-void efx_fini_tx_queue(struct efx_tx_queue *tx_queue);
-
-netdev_tx_t efx_hard_start_xmit(struct sk_buff *skb,
-				      struct net_device *net_dev);
-void efx_release_tx_buffers(struct efx_tx_queue *tx_queue);
-
-#endif /* EFX_TX_H */
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index c821c15..acd9c73 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -1,6 +1,6 @@
 /****************************************************************************
  * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006-2008 Solarflare Communications Inc.
+ * Copyright 2006-2009 Solarflare Communications Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
@@ -16,7 +16,9 @@
  */
 
 #define EFX_WORKAROUND_ALWAYS(efx) 1
-#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
+#define EFX_WORKAROUND_FALCON_A(efx) (efx_nic_rev(efx) <= EFX_REV_FALCON_A1)
+#define EFX_WORKAROUND_FALCON_AB(efx) (efx_nic_rev(efx) <= EFX_REV_FALCON_B0)
+#define EFX_WORKAROUND_SIENA(efx) (efx_nic_rev(efx) == EFX_REV_SIENA_A0)
 #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx)
 #define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \
 				     (efx)->phy_type == PHY_TYPE_SFT9001B)
@@ -27,20 +29,22 @@
 #define EFX_WORKAROUND_7575 EFX_WORKAROUND_ALWAYS
 /* Bit-bashed I2C reads cause performance drop */
 #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G
-/* TX pkt parser problem with <= 16 byte TXes */
-#define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS
 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor
  * or a PCIe error (bug 11028) */
 #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS
 /* Transmit flow control may get disabled */
-#define EFX_WORKAROUND_11482 EFX_WORKAROUND_ALWAYS
-/* Flush events can take a very long time to appear */
-#define EFX_WORKAROUND_11557 EFX_WORKAROUND_ALWAYS
+#define EFX_WORKAROUND_11482 EFX_WORKAROUND_FALCON_AB
 /* Truncated IPv4 packets can confuse the TX packet parser */
-#define EFX_WORKAROUND_15592 EFX_WORKAROUND_ALWAYS
+#define EFX_WORKAROUND_15592 EFX_WORKAROUND_FALCON_AB
+/* Legacy ISR read can return zero once */
+#define EFX_WORKAROUND_15783 EFX_WORKAROUND_SIENA
+/* Legacy interrupt storm when interrupt fifo fills */
+#define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA
 
 /* Spurious parity errors in TSORT buffers */
 #define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
+/* Unaligned read request >512 bytes after aligning may break TSORT */
+#define EFX_WORKAROUND_5391 EFX_WORKAROUND_FALCON_A
 /* iSCSI parsing errors */
 #define EFX_WORKAROUND_5583 EFX_WORKAROUND_FALCON_A
 /* RX events go missing */
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
deleted file mode 100644
index e6b3d5e..0000000
--- a/drivers/net/sfc/xfp_phy.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-/*
- * Driver for SFP+ and XFP optical PHYs plus some support specific to the
- * AMCC QT20xx adapters; see www.amcc.com for details
- */
-
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include "efx.h"
-#include "mdio_10g.h"
-#include "phy.h"
-#include "falcon.h"
-
-#define XFP_REQUIRED_DEVS (MDIO_DEVS_PCS |	\
-			   MDIO_DEVS_PMAPMD |	\
-			   MDIO_DEVS_PHYXS)
-
-#define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
-		       (1 << LOOPBACK_PMAPMD) |		\
-		       (1 << LOOPBACK_NETWORK))
-
-/****************************************************************************/
-/* Quake-specific MDIO registers */
-#define MDIO_QUAKE_LED0_REG	(0xD006)
-
-/* QT2025C only */
-#define PCS_FW_HEARTBEAT_REG	0xd7ee
-#define PCS_FW_HEARTB_LBN	0
-#define PCS_FW_HEARTB_WIDTH	8
-#define PCS_UC8051_STATUS_REG	0xd7fd
-#define PCS_UC_STATUS_LBN	0
-#define PCS_UC_STATUS_WIDTH	8
-#define PCS_UC_STATUS_FW_SAVE	0x20
-#define PMA_PMD_FTX_CTRL2_REG	0xc309
-#define PMA_PMD_FTX_STATIC_LBN	13
-#define PMA_PMD_VEND1_REG	0xc001
-#define PMA_PMD_VEND1_LBTXD_LBN	15
-#define PCS_VEND1_REG	   	0xc000
-#define PCS_VEND1_LBTXD_LBN	5
-
-void xfp_set_led(struct efx_nic *p, int led, int mode)
-{
-	int addr = MDIO_QUAKE_LED0_REG + led;
-	efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
-}
-
-struct xfp_phy_data {
-	enum efx_phy_mode phy_mode;
-};
-
-#define XFP_MAX_RESET_TIME 500
-#define XFP_RESET_WAIT 10
-
-static int qt2025c_wait_reset(struct efx_nic *efx)
-{
-	unsigned long timeout = jiffies + 10 * HZ;
-	int reg, old_counter = 0;
-
-	/* Wait for firmware heartbeat to start */
-	for (;;) {
-		int counter;
-		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_FW_HEARTBEAT_REG);
-		if (reg < 0)
-			return reg;
-		counter = ((reg >> PCS_FW_HEARTB_LBN) &
-			    ((1 << PCS_FW_HEARTB_WIDTH) - 1));
-		if (old_counter == 0)
-			old_counter = counter;
-		else if (counter != old_counter)
-			break;
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-		msleep(10);
-	}
-
-	/* Wait for firmware status to look good */
-	for (;;) {
-		reg = efx_mdio_read(efx, MDIO_MMD_PCS, PCS_UC8051_STATUS_REG);
-		if (reg < 0)
-			return reg;
-		if ((reg &
-		     ((1 << PCS_UC_STATUS_WIDTH) - 1) << PCS_UC_STATUS_LBN) >=
-		    PCS_UC_STATUS_FW_SAVE)
-			break;
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-		msleep(100);
-	}
-
-	return 0;
-}
-
-static int xfp_reset_phy(struct efx_nic *efx)
-{
-	int rc;
-
-	if (efx->phy_type == PHY_TYPE_QT2025C) {
-		/* Wait for the reset triggered by falcon_reset_hw()
-		 * to complete */
-		rc = qt2025c_wait_reset(efx);
-		if (rc < 0)
-			goto fail;
-	} else {
-		/* Reset the PHYXS MMD. This is documented as doing
-		 * a complete soft reset. */
-		rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
-					XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
-					XFP_RESET_WAIT);
-		if (rc < 0)
-			goto fail;
-	}
-
-	/* Wait 250ms for the PHY to complete bootup */
-	msleep(250);
-
-	/* Check that all the MMDs we expect are present and responding. We
-	 * expect faults on some if the link is down, but not on the PHY XS */
-	rc = efx_mdio_check_mmds(efx, XFP_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
-	if (rc < 0)
-		goto fail;
-
-	efx->board_info.init_leds(efx);
-
-	return rc;
-
- fail:
-	EFX_ERR(efx, "PHY reset timed out\n");
-	return rc;
-}
-
-static int xfp_phy_init(struct efx_nic *efx)
-{
-	struct xfp_phy_data *phy_data;
-	u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
-	int rc;
-
-	phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
-	if (!phy_data)
-		return -ENOMEM;
-	efx->phy_data = phy_data;
-
-	EFX_INFO(efx, "PHY ID reg %x (OUI %06x model %02x revision %x)\n",
-		 devid, efx_mdio_id_oui(devid), efx_mdio_id_model(devid),
-		 efx_mdio_id_rev(devid));
-
-	phy_data->phy_mode = efx->phy_mode;
-
-	rc = xfp_reset_phy(efx);
-
-	EFX_INFO(efx, "PHY init %s.\n",
-		 rc ? "failed" : "successful");
-	if (rc < 0)
-		goto fail;
-
-	return 0;
-
- fail:
-	kfree(efx->phy_data);
-	efx->phy_data = NULL;
-	return rc;
-}
-
-static void xfp_phy_clear_interrupt(struct efx_nic *efx)
-{
-	/* Read to clear link status alarm */
-	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
-}
-
-static int xfp_link_ok(struct efx_nic *efx)
-{
-	return efx_mdio_links_ok(efx, XFP_REQUIRED_DEVS);
-}
-
-static void xfp_phy_poll(struct efx_nic *efx)
-{
-	int link_up = xfp_link_ok(efx);
-	/* Simulate a PHY event if link state has changed */
-	if (link_up != efx->link_up)
-		falcon_sim_phy_event(efx);
-}
-
-static void xfp_phy_reconfigure(struct efx_nic *efx)
-{
-	struct xfp_phy_data *phy_data = efx->phy_data;
-
-	if (efx->phy_type == PHY_TYPE_QT2025C) {
-		/* There are several different register bits which can
-		 * disable TX (and save power) on direct-attach cables
-		 * or optical transceivers, varying somewhat between
-		 * firmware versions.  Only 'static mode' appears to
-		 * cover everything. */
-		mdio_set_flag(
-			&efx->mdio, efx->mdio.prtad, MDIO_MMD_PMAPMD,
-			PMA_PMD_FTX_CTRL2_REG, 1 << PMA_PMD_FTX_STATIC_LBN,
-			efx->phy_mode & PHY_MODE_TX_DISABLED ||
-			efx->phy_mode & PHY_MODE_LOW_POWER ||
-			efx->loopback_mode == LOOPBACK_PCS ||
-			efx->loopback_mode == LOOPBACK_PMAPMD);
-	} else {
-		/* Reset the PHY when moving from tx off to tx on */
-		if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
-		    (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
-			xfp_reset_phy(efx);
-
-		efx_mdio_transmit_disable(efx);
-	}
-
-	efx_mdio_phy_reconfigure(efx);
-
-	phy_data->phy_mode = efx->phy_mode;
-	efx->link_up = xfp_link_ok(efx);
-	efx->link_speed = 10000;
-	efx->link_fd = true;
-	efx->link_fc = efx->wanted_fc;
-}
-
-static void xfp_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
-	mdio45_ethtool_gset(&efx->mdio, ecmd);
-}
-
-static void xfp_phy_fini(struct efx_nic *efx)
-{
-	/* Clobber the LED if it was blinking */
-	efx->board_info.blink(efx, false);
-
-	/* Free the context block */
-	kfree(efx->phy_data);
-	efx->phy_data = NULL;
-}
-
-struct efx_phy_operations falcon_xfp_phy_ops = {
-	.macs		 = EFX_XMAC,
-	.init            = xfp_phy_init,
-	.reconfigure     = xfp_phy_reconfigure,
-	.poll            = xfp_phy_poll,
-	.fini            = xfp_phy_fini,
-	.clear_interrupt = xfp_phy_clear_interrupt,
-	.get_settings    = xfp_phy_get_settings,
-	.set_settings	 = efx_mdio_set_settings,
-	.mmds            = XFP_REQUIRED_DEVS,
-	.loopbacks       = XFP_LOOPBACKS,
-};
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index f4dfd1f..6b364a6 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -365,11 +365,10 @@
 					}
 					skb_reserve(newskb, 2);
 				} else {
-					skb = netdev_alloc_skb(dev, len + 2);
-					if (skb) {
-						skb_reserve(skb, 2);
+					skb = netdev_alloc_skb_ip_align(dev, len);
+					if (skb)
 						skb_copy_to_linear_data(skb, rd->skb->data, len);
-					}
+
 					newskb = rd->skb;
 				}
 memory_squeeze:
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 528b912..c88bc10 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -30,6 +30,7 @@
 #include <linux/phy.h>
 #include <linux/cache.h>
 #include <linux/io.h>
+#include <linux/pm_runtime.h>
 #include <asm/cacheflush.h>
 
 #include "sh_eth.h"
@@ -299,16 +300,20 @@
  * When you want use this device, you must set MAC address in bootloader.
  *
  */
-static void read_mac_address(struct net_device *ndev)
+static void read_mac_address(struct net_device *ndev, unsigned char *mac)
 {
 	u32 ioaddr = ndev->base_addr;
 
-	ndev->dev_addr[0] = (ctrl_inl(ioaddr + MAHR) >> 24);
-	ndev->dev_addr[1] = (ctrl_inl(ioaddr + MAHR) >> 16) & 0xFF;
-	ndev->dev_addr[2] = (ctrl_inl(ioaddr + MAHR) >> 8) & 0xFF;
-	ndev->dev_addr[3] = (ctrl_inl(ioaddr + MAHR) & 0xFF);
-	ndev->dev_addr[4] = (ctrl_inl(ioaddr + MALR) >> 8) & 0xFF;
-	ndev->dev_addr[5] = (ctrl_inl(ioaddr + MALR) & 0xFF);
+	if (mac[0] || mac[1] || mac[2] || mac[3] || mac[4] || mac[5]) {
+		memcpy(ndev->dev_addr, mac, 6);
+	} else {
+		ndev->dev_addr[0] = (ctrl_inl(ioaddr + MAHR) >> 24);
+		ndev->dev_addr[1] = (ctrl_inl(ioaddr + MAHR) >> 16) & 0xFF;
+		ndev->dev_addr[2] = (ctrl_inl(ioaddr + MAHR) >> 8) & 0xFF;
+		ndev->dev_addr[3] = (ctrl_inl(ioaddr + MAHR) & 0xFF);
+		ndev->dev_addr[4] = (ctrl_inl(ioaddr + MALR) >> 8) & 0xFF;
+		ndev->dev_addr[5] = (ctrl_inl(ioaddr + MALR) & 0xFF);
+	}
 }
 
 struct bb_info {
@@ -1009,7 +1014,9 @@
 	int ret = 0;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
-	ret = request_irq(ndev->irq, &sh_eth_interrupt,
+	pm_runtime_get_sync(&mdp->pdev->dev);
+
+	ret = request_irq(ndev->irq, sh_eth_interrupt,
 #if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
 				IRQF_SHARED,
 #else
@@ -1045,6 +1052,7 @@
 
 out_free_irq:
 	free_irq(ndev->irq, ndev);
+	pm_runtime_put_sync(&mdp->pdev->dev);
 	return ret;
 }
 
@@ -1176,6 +1184,8 @@
 	ringsize = sizeof(struct sh_eth_txdesc) * TX_RING_SIZE;
 	dma_free_coherent(NULL, ringsize, mdp->tx_ring, mdp->tx_desc_dma);
 
+	pm_runtime_put_sync(&mdp->pdev->dev);
+
 	return 0;
 }
 
@@ -1184,6 +1194,8 @@
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	u32 ioaddr = ndev->base_addr;
 
+	pm_runtime_get_sync(&mdp->pdev->dev);
+
 	mdp->stats.tx_dropped += ctrl_inl(ioaddr + TROCR);
 	ctrl_outl(0, ioaddr + TROCR);	/* (write clear) */
 	mdp->stats.collisions += ctrl_inl(ioaddr + CDCR);
@@ -1199,6 +1211,8 @@
 	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
 	ctrl_outl(0, ioaddr + CNDCR);	/* (write clear) */
 #endif
+	pm_runtime_put_sync(&mdp->pdev->dev);
+
 	return &mdp->stats;
 }
 
@@ -1407,6 +1421,9 @@
 
 	mdp = netdev_priv(ndev);
 	spin_lock_init(&mdp->lock);
+	mdp->pdev = pdev;
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
 
 	pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data);
 	/* get PHY ID */
@@ -1428,7 +1445,7 @@
 	mdp->post_fw = POST_FW >> (devno << 1);
 
 	/* read and set MAC address */
-	read_mac_address(ndev);
+	read_mac_address(ndev, pd->mac_addr);
 
 	/* First device only init */
 	if (!devno) {
@@ -1482,18 +1499,37 @@
 	sh_mdio_release(ndev);
 	unregister_netdev(ndev);
 	flush_scheduled_work();
-
+	pm_runtime_disable(&pdev->dev);
 	free_netdev(ndev);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
 
+static int sh_eth_runtime_nop(struct device *dev)
+{
+	/*
+	 * Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops sh_eth_dev_pm_ops = {
+	.runtime_suspend = sh_eth_runtime_nop,
+	.runtime_resume = sh_eth_runtime_nop,
+};
+
 static struct platform_driver sh_eth_driver = {
 	.probe = sh_eth_drv_probe,
 	.remove = sh_eth_drv_remove,
 	.driver = {
 		   .name = CARDNAME,
+		   .pm = &sh_eth_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index ba151f8..8b47763 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -703,6 +703,7 @@
 };
 
 struct sh_eth_private {
+	struct platform_device *pdev;
 	struct sh_eth_cpu_data *cd;
 	dma_addr_t rx_desc_dma;
 	dma_addr_t tx_desc_dma;
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 7cc9898..31233b4 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -536,13 +536,12 @@
 	if (pkt_size >= rx_copybreak)
 		goto out;
 
-	skb = netdev_alloc_skb(tp->dev, pkt_size + 2);
+	skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
 	if (!skb)
 		goto out;
 
 	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz,
 				PCI_DMA_FROMDEVICE);
-	skb_reserve(skb, 2);
 	skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
 	*sk_buff = skb;
 	done = true;
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index c072f7f..9a12d88 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1016,7 +1016,7 @@
 	/* Equalizer workaround Rule */
 	sis630_set_eq(net_dev, sis_priv->chipset_rev);
 
-	ret = request_irq(net_dev->irq, &sis900_interrupt, IRQF_SHARED,
+	ret = request_irq(net_dev->irq, sis900_interrupt, IRQF_SHARED,
 						net_dev->name, net_dev);
 	if (ret)
 		return ret;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 8f54143..379a3dc 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -238,8 +238,8 @@
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
 
-	if ((wol->wolopts & ~wol_supported(hw))
-	    || !device_can_wakeup(&hw->pdev->dev))
+	if ((wol->wolopts & ~wol_supported(hw)) ||
+	    !device_can_wakeup(&hw->pdev->dev))
 		return -EOPNOTSUPP;
 
 	skge->wol = wol->wolopts;
@@ -576,9 +576,10 @@
 {
 	struct skge_port *skge = netdev_priv(dev);
 
-	ecmd->rx_pause = (skge->flow_control == FLOW_MODE_SYMMETRIC)
-		|| (skge->flow_control == FLOW_MODE_SYM_OR_REM);
-	ecmd->tx_pause = ecmd->rx_pause || (skge->flow_control == FLOW_MODE_LOC_SEND);
+	ecmd->rx_pause = ((skge->flow_control == FLOW_MODE_SYMMETRIC) ||
+			  (skge->flow_control == FLOW_MODE_SYM_OR_REM));
+	ecmd->tx_pause = (ecmd->rx_pause ||
+			  (skge->flow_control == FLOW_MODE_LOC_SEND));
 
 	ecmd->autoneg = ecmd->rx_pause || ecmd->tx_pause;
 }
@@ -2779,8 +2780,8 @@
 		/* This seems backwards, but it is what the sk98lin
 		 * does.  Looks like hardware is wrong?
 		 */
-		if (ipip_hdr(skb)->protocol == IPPROTO_UDP
-	            && hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
+		if (ipip_hdr(skb)->protocol == IPPROTO_UDP &&
+	            hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON)
 			control = BMU_TCP_CHECK;
 		else
 			control = BMU_UDP_CHECK;
@@ -2948,8 +2949,8 @@
 	else {
 		memset(filter, 0, sizeof(filter));
 
-		if (skge->flow_status == FLOW_STAT_REM_SEND
-		    || skge->flow_status == FLOW_STAT_SYMMETRIC)
+		if (skge->flow_status == FLOW_STAT_REM_SEND ||
+		    skge->flow_status == FLOW_STAT_SYMMETRIC)
 			genesis_add_filter(filter, pause_mc_addr);
 
 		for (i = 0; list && i < count; i++, list = list->next)
@@ -2972,8 +2973,8 @@
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
 	struct dev_mc_list *list = dev->mc_list;
-	int rx_pause = (skge->flow_status == FLOW_STAT_REM_SEND
-			|| skge->flow_status == FLOW_STAT_SYMMETRIC);
+	int rx_pause = (skge->flow_status == FLOW_STAT_REM_SEND ||
+			skge->flow_status == FLOW_STAT_SYMMETRIC);
 	u16 reg;
 	u8 filter[8];
 
@@ -3071,11 +3072,10 @@
 		goto error;
 
 	if (len < RX_COPY_THRESHOLD) {
-		skb = netdev_alloc_skb(dev, len + 2);
+		skb = netdev_alloc_skb_ip_align(dev, len);
 		if (!skb)
 			goto resubmit;
 
-		skb_reserve(skb, 2);
 		pci_dma_sync_single_for_cpu(skge->hw->pdev,
 					    pci_unmap_addr(e, mapaddr),
 					    len, PCI_DMA_FROMDEVICE);
@@ -3086,11 +3086,11 @@
 		skge_rx_reuse(e, skge->rx_buf_size);
 	} else {
 		struct sk_buff *nskb;
-		nskb = netdev_alloc_skb(dev, skge->rx_buf_size + NET_IP_ALIGN);
+
+		nskb = netdev_alloc_skb_ip_align(dev, skge->rx_buf_size);
 		if (!nskb)
 			goto resubmit;
 
-		skb_reserve(nskb, NET_IP_ALIGN);
 		pci_unmap_single(skge->hw->pdev,
 				 pci_unmap_addr(e, mapaddr),
 				 pci_unmap_len(e, maplen),
@@ -3948,7 +3948,7 @@
 	hw->pdev = pdev;
 	spin_lock_init(&hw->hw_lock);
 	spin_lock_init(&hw->phy_lock);
-	tasklet_init(&hw->phy_task, &skge_extirq, (unsigned long) hw);
+	tasklet_init(&hw->phy_task, skge_extirq, (unsigned long) hw);
 
 	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
 	if (!hw->regs) {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 6a10d7b..3943d89 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.25"
+#define DRV_VERSION		"1.26"
 #define PFX			DRV_NAME " "
 
 /*
@@ -102,6 +102,7 @@
 static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
+	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, 	/* DGE-550SX */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) },	/* DGE-560SX */
@@ -139,6 +140,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
 	{ 0 }
 };
 
@@ -372,8 +374,8 @@
 			ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
 
 			/* downshift on PHY 88E1112 and 88E1149 is changed */
-			if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED)
-			    && (hw->flags & SKY2_HW_NEWER_PHY)) {
+			if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
+			     (hw->flags & SKY2_HW_NEWER_PHY)) {
 				/* set downshift counter to 3x and enable downshift */
 				ctrl &= ~PHY_M_PC_DSC_MSK;
 				ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
@@ -602,13 +604,23 @@
 		/* apply workaround for integrated resistors calibration */
 		gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
 		gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
+	} else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
+		/* apply fixes in PHY AFE */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
+
+		/* apply RDAC termination workaround */
+		gm_phy_write(hw, port, 24, 0x2800);
+		gm_phy_write(hw, port, 23, 0x2001);
+
+		/* set page register back to 0 */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 	} else if (hw->chip_id != CHIP_ID_YUKON_EX &&
 		   hw->chip_id < CHIP_ID_YUKON_SUPR) {
 		/* no effect on Yukon-XL */
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
-		if ( !(sky2->flags & SKY2_FLAG_AUTO_SPEED)
-		     || sky2->speed == SPEED_100) {
+		if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
+		    sky2->speed == SPEED_100) {
 			/* turn on 100 Mbps LED (LED_LINK100) */
 			ledover |= PHY_M_LED_MO_100(MO_LED_ON);
 		}
@@ -786,8 +798,7 @@
 
 	if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
 	      hw->chip_rev != CHIP_REV_YU_EX_A0) ||
-	     hw->chip_id == CHIP_ID_YUKON_FE_P ||
-	     hw->chip_id == CHIP_ID_YUKON_SUPR) {
+	     hw->chip_id >= CHIP_ID_YUKON_FE_P) {
 		/* Yukon-Extreme B0 and further Extreme devices */
 		/* enable Store & Forward mode for TX */
 
@@ -925,8 +936,14 @@
 
 	/* On chips without ram buffer, pause is controled by MAC level */
 	if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
-		sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
-		sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
+		/* Pause threshold is scaled by 8 in bytes */
+		if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
+		    hw->chip_rev == CHIP_REV_YU_FE2_A0)
+			reg = 1568 / 8;
+		else
+			reg = 1024 / 8;
+		sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
+		sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
 
 		sky2_set_tx_stfwd(hw, port);
 	}
@@ -1336,8 +1353,8 @@
 	/* These chips have no ram buffer?
 	 * MAC Rx RAM Read is controlled by hardware */
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
-	    (hw->chip_rev == CHIP_REV_YU_EC_U_A1
-	     || hw->chip_rev == CHIP_REV_YU_EC_U_B0))
+	    (hw->chip_rev == CHIP_REV_YU_EC_U_A1 ||
+	     hw->chip_rev == CHIP_REV_YU_EC_U_B0))
 		sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
 
 	sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
@@ -1397,6 +1414,31 @@
 
 	/* Tell chip about available buffers */
 	sky2_rx_update(sky2, rxq);
+
+	if (hw->chip_id == CHIP_ID_YUKON_EX ||
+	    hw->chip_id == CHIP_ID_YUKON_SUPR) {
+		/*
+		 * Disable flushing of non ASF packets;
+		 * must be done after initializing the BMUs;
+		 * drivers without ASF support should do this too, otherwise
+		 * it may happen that they cannot run on ASF devices;
+		 * remember that the MAC FIFO isn't reset during initialization.
+		 */
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
+	}
+
+	if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
+		/* Enable RX Home Address & Routing Header checksum fix */
+		sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
+			     RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
+
+		/* Enable TX Home Address & Routing Header checksum fix */
+		sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
+			     TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
+	}
+
+
+
 	return 0;
 nomem:
 	sky2_rx_clean(sky2);
@@ -1518,8 +1560,8 @@
 		sky2_write32(hw, Q_ADDR(txqaddr[port], Q_TEST), F_TX_CHK_AUTO_OFF);
 
 	/* Set almost empty threshold */
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U
-	    && hw->chip_rev == CHIP_REV_YU_EC_U_A0)
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+	    hw->chip_rev == CHIP_REV_YU_EC_U_A0)
 		sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV);
 
 	sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
@@ -1865,8 +1907,8 @@
 	sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
 
 	/* Workaround shared GMAC reset */
-	if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0
-	      && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
+	if (!(hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev == 0 &&
+	      port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
 		sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
@@ -2043,8 +2085,8 @@
 			sky2->flow_status = FC_TX;
 	}
 
-	if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
-	    && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
+	if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 &&
+	    !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
 		sky2->flow_status = FC_NONE;
 
 	if (sky2->flow_status & FC_TX)
@@ -2096,6 +2138,25 @@
 	spin_unlock(&sky2->phy_lock);
 }
 
+/* Special quick link interrupt (Yukon-2 Optima only) */
+static void sky2_qlink_intr(struct sky2_hw *hw)
+{
+	struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
+	u32 imask;
+	u16 phy;
+
+	/* disable irq */
+	imask = sky2_read32(hw, B0_IMSK);
+	imask &= ~Y2_IS_PHY_QLNK;
+	sky2_write32(hw, B0_IMSK, imask);
+
+	/* reset PHY Link Detect */
+	phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+	sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+
+	sky2_link_up(sky2);
+}
+
 /* Transmit timeout is only called if we are running, carrier is up
  * and tx queue is full (stopped).
  */
@@ -2191,9 +2252,8 @@
 {
 	struct sk_buff *skb;
 
-	skb = netdev_alloc_skb(sky2->netdev, length + 2);
+	skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
 	if (likely(skb)) {
-		skb_reserve(skb, 2);
 		pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
 					    length, PCI_DMA_FROMDEVICE);
 		skb_copy_from_linear_data(re->skb, skb->data, length);
@@ -2766,6 +2826,9 @@
 	if (status & Y2_IS_IRQ_PHY2)
 		sky2_phy_intr(hw, 1);
 
+	if (status & Y2_IS_PHY_QLNK)
+		sky2_qlink_intr(hw);
+
 	while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
 		work_done += sky2_status_intr(hw, work_limit - work_done, idx);
 
@@ -2815,6 +2878,7 @@
 	case CHIP_ID_YUKON_EX:
 	case CHIP_ID_YUKON_SUPR:
 	case CHIP_ID_YUKON_UL_2:
+	case CHIP_ID_YUKON_OPT:
 		return 125;
 
 	case CHIP_ID_YUKON_FE:
@@ -2904,6 +2968,7 @@
 		break;
 
 	case CHIP_ID_YUKON_UL_2:
+	case CHIP_ID_YUKON_OPT:
 		hw->flags = SKY2_HW_GIGABIT
 			| SKY2_HW_ADV_POWER_CTL;
 		break;
@@ -2986,6 +3051,52 @@
 			sky2_write16(hw, SK_REG(i, GMAC_CTRL),
 				     GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
 				     | GMC_BYP_RETR_ON);
+
+	}
+
+	if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
+		/* enable MACSec clock gating */
+		sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
+	}
+
+	if (hw->chip_id == CHIP_ID_YUKON_OPT) {
+		u16 reg;
+		u32 msk;
+
+		if (hw->chip_rev == 0) {
+			/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
+			sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
+
+			/* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
+			reg = 10;
+		} else {
+			/* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
+			reg = 3;
+		}
+
+		reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
+
+		/* reset PHY Link Detect */
+		sky2_pci_write16(hw, PSM_CONFIG_REG4,
+				 reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
+		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
+
+
+		/* enable PHY Quick Link */
+		msk = sky2_read32(hw, B0_IMSK);
+		msk |= Y2_IS_PHY_QLNK;
+		sky2_write32(hw, B0_IMSK, msk);
+
+		/* check if PSMv2 was running before */
+		reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
+		if (reg & PCI_EXP_LNKCTL_ASPMC) {
+			int cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+			/* restore the PCIe Link Control register */
+			sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
+		}
+
+		/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
+		sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
 	}
 
 	/* Clear I2C IRQ noise */
@@ -3133,8 +3244,8 @@
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
 
-	if ((wol->wolopts & ~sky2_wol_supported(sky2->hw))
-	    || !device_can_wakeup(&hw->pdev->dev))
+	if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
+	    !device_can_wakeup(&hw->pdev->dev))
 		return -EOPNOTSUPP;
 
 	sky2->wol = wol->wolopts;
@@ -4406,9 +4517,11 @@
 		"FE+",		/* 0xb8 */
 		"Supreme",	/* 0xb9 */
 		"UL 2",		/* 0xba */
+		"Unknown",	/* 0xbb */
+		"Optima",	/* 0xbc */
 	};
 
-	if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
+	if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_OPT)
 		strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
 	else
 		snprintf(buf, sz, "(chip %#x)", chipid);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index ed54129..365d79c 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -16,6 +16,13 @@
 	PCI_DEV_REG5    = 0x88,
 	PCI_CFG_REG_0	= 0x90,
 	PCI_CFG_REG_1	= 0x94,
+
+	PSM_CONFIG_REG0  = 0x98,
+	PSM_CONFIG_REG1	 = 0x9C,
+	PSM_CONFIG_REG2  = 0x160,
+	PSM_CONFIG_REG3  = 0x164,
+	PSM_CONFIG_REG4  = 0x168,
+
 };
 
 /* Yukon-2 */
@@ -48,6 +55,37 @@
 	PCI_USEDATA64	= 1<<0,		/* Use 64Bit Data bus ext */
 };
 
+/*	PCI_OUR_REG_3		32 bit	Our Register 3 (Yukon-ECU only) */
+enum pci_dev_reg_3 {
+	P_CLK_ASF_REGS_DIS	= 1<<18,/* Disable Clock ASF (Yukon-Ext.) */
+	P_CLK_COR_REGS_D0_DIS	= 1<<17,/* Disable Clock Core Regs D0 */
+	P_CLK_MACSEC_DIS	= 1<<17,/* Disable Clock MACSec (Yukon-Ext.) */
+	P_CLK_PCI_REGS_D0_DIS	= 1<<16,/* Disable Clock PCI  Regs D0 */
+	P_CLK_COR_YTB_ARB_DIS	= 1<<15,/* Disable Clock YTB  Arbiter */
+	P_CLK_MAC_LNK1_D3_DIS	= 1<<14,/* Disable Clock MAC  Link1 D3 */
+	P_CLK_COR_LNK1_D0_DIS	= 1<<13,/* Disable Clock Core Link1 D0 */
+	P_CLK_MAC_LNK1_D0_DIS	= 1<<12,/* Disable Clock MAC  Link1 D0 */
+	P_CLK_COR_LNK1_D3_DIS	= 1<<11,/* Disable Clock Core Link1 D3 */
+	P_CLK_PCI_MST_ARB_DIS	= 1<<10,/* Disable Clock PCI  Master Arb. */
+	P_CLK_COR_REGS_D3_DIS	= 1<<9,	/* Disable Clock Core Regs D3 */
+	P_CLK_PCI_REGS_D3_DIS	= 1<<8,	/* Disable Clock PCI  Regs D3 */
+	P_CLK_REF_LNK1_GM_DIS	= 1<<7,	/* Disable Clock Ref. Link1 GMAC */
+	P_CLK_COR_LNK1_GM_DIS	= 1<<6,	/* Disable Clock Core Link1 GMAC */
+	P_CLK_PCI_COMMON_DIS	= 1<<5,	/* Disable Clock PCI  Common */
+	P_CLK_COR_COMMON_DIS	= 1<<4,	/* Disable Clock Core Common */
+	P_CLK_PCI_LNK1_BMU_DIS	= 1<<3,	/* Disable Clock PCI  Link1 BMU */
+	P_CLK_COR_LNK1_BMU_DIS	= 1<<2,	/* Disable Clock Core Link1 BMU */
+	P_CLK_PCI_LNK1_BIU_DIS	= 1<<1,	/* Disable Clock PCI  Link1 BIU */
+	P_CLK_COR_LNK1_BIU_DIS	= 1<<0,	/* Disable Clock Core Link1 BIU */
+	PCIE_OUR3_WOL_D3_COLD_SET = P_CLK_ASF_REGS_DIS |
+				    P_CLK_COR_REGS_D0_DIS |
+				    P_CLK_COR_LNK1_D0_DIS |
+				    P_CLK_MAC_LNK1_D0_DIS |
+				    P_CLK_PCI_MST_ARB_DIS |
+				    P_CLK_COR_COMMON_DIS |
+				    P_CLK_COR_LNK1_BMU_DIS,
+};
+
 /*	PCI_OUR_REG_4		32 bit	Our Register 4 (Yukon-ECU only) */
 enum pci_dev_reg_4 {
 				/* (Link Training & Status State Machine) */
@@ -114,7 +152,7 @@
 				     P_GAT_PCIE_RX_EL_IDLE,
 };
 
-#/*	PCI_CFG_REG_1			32 bit	Config Register 1 (Yukon-Ext only) */
+/*	PCI_CFG_REG_1			32 bit	Config Register 1 (Yukon-Ext only) */
 enum pci_cfg_reg1 {
 	P_CF1_DIS_REL_EVT_RST	= 1<<24, /* Dis. Rel. Event during PCIE reset */
 										/* Bit 23..21: Release Clock on Event */
@@ -145,6 +183,72 @@
 					P_CF1_ENA_TXBMU_WR_IDLE,
 };
 
+/* Yukon-Optima */
+enum {
+	PSM_CONFIG_REG1_AC_PRESENT_STATUS = 1<<31,   /* AC Present Status */
+
+	PSM_CONFIG_REG1_PTP_CLK_SEL	  = 1<<29,   /* PTP Clock Select */
+	PSM_CONFIG_REG1_PTP_MODE	  = 1<<28,   /* PTP Mode */
+
+	PSM_CONFIG_REG1_MUX_PHY_LINK	  = 1<<27,   /* PHY Energy Detect Event */
+
+	PSM_CONFIG_REG1_EN_PIN63_AC_PRESENT = 1<<26,  /* Enable LED_DUPLEX for ac_present */
+	PSM_CONFIG_REG1_EN_PCIE_TIMER	  = 1<<25,    /* Enable PCIe Timer */
+	PSM_CONFIG_REG1_EN_SPU_TIMER	  = 1<<24,    /* Enable SPU Timer */
+	PSM_CONFIG_REG1_POLARITY_AC_PRESENT = 1<<23,  /* AC Present Polarity */
+
+	PSM_CONFIG_REG1_EN_AC_PRESENT	  = 1<<21,    /* Enable AC Present */
+
+	PSM_CONFIG_REG1_EN_GPHY_INT_PSM	= 1<<20,      /* Enable GPHY INT for PSM */
+	PSM_CONFIG_REG1_DIS_PSM_TIMER	= 1<<19,      /* Disable PSM Timer */
+};
+
+/* Yukon-Supreme */
+enum {
+	PSM_CONFIG_REG1_GPHY_ENERGY_STS	= 1<<31, /* GPHY Energy Detect Status */
+
+	PSM_CONFIG_REG1_UART_MODE_MSK	= 3<<29, /* UART_Mode */
+	PSM_CONFIG_REG1_CLK_RUN_ASF	= 1<<28, /* Enable Clock Free Running for ASF Subsystem */
+	PSM_CONFIG_REG1_UART_CLK_DISABLE= 1<<27, /* Disable UART clock */
+	PSM_CONFIG_REG1_VAUX_ONE	= 1<<26, /* Tie internal Vaux to 1'b1 */
+	PSM_CONFIG_REG1_UART_FC_RI_VAL	= 1<<25, /* Default value for UART_RI_n */
+	PSM_CONFIG_REG1_UART_FC_DCD_VAL	= 1<<24, /* Default value for UART_DCD_n */
+	PSM_CONFIG_REG1_UART_FC_DSR_VAL	= 1<<23, /* Default value for UART_DSR_n */
+	PSM_CONFIG_REG1_UART_FC_CTS_VAL	= 1<<22, /* Default value for UART_CTS_n */
+	PSM_CONFIG_REG1_LATCH_VAUX	= 1<<21, /* Enable Latch current Vaux_avlbl */
+	PSM_CONFIG_REG1_FORCE_TESTMODE_INPUT= 1<<20, /* Force Testmode pin as input PAD */
+	PSM_CONFIG_REG1_UART_RST	= 1<<19, /* UART_RST */
+	PSM_CONFIG_REG1_PSM_PCIE_L1_POL	= 1<<18, /* PCIE L1 Event Polarity for PSM */
+	PSM_CONFIG_REG1_TIMER_STAT	= 1<<17, /* PSM Timer Status */
+	PSM_CONFIG_REG1_GPHY_INT	= 1<<16, /* GPHY INT Status */
+	PSM_CONFIG_REG1_FORCE_TESTMODE_ZERO= 1<<15, /* Force internal Testmode as 1'b0 */
+	PSM_CONFIG_REG1_EN_INT_ASPM_CLKREQ = 1<<14, /* ENABLE INT for CLKRUN on ASPM and CLKREQ */
+	PSM_CONFIG_REG1_EN_SND_TASK_ASPM_CLKREQ	= 1<<13, /* ENABLE Snd_task for CLKRUN on ASPM and CLKREQ */
+	PSM_CONFIG_REG1_DIS_CLK_GATE_SND_TASK	= 1<<12, /* Disable CLK_GATE control snd_task */
+	PSM_CONFIG_REG1_DIS_FF_CHIAN_SND_INTA	= 1<<11, /* Disable flip-flop chain for sndmsg_inta */
+
+	PSM_CONFIG_REG1_DIS_LOADER	= 1<<9, /* Disable Loader SM after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_DO_PWDN		= 1<<8, /* Do Power Down, Start PSM Scheme */
+	PSM_CONFIG_REG1_DIS_PIG		= 1<<7, /* Disable Plug-in-Go SM after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_DIS_PERST	= 1<<6, /* Disable Internal PCIe Reset after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_EN_REG18_PD	= 1<<5, /* Enable REG18 Power Down for PSM */
+	PSM_CONFIG_REG1_EN_PSM_LOAD	= 1<<4, /* Disable EEPROM Loader after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_EN_PSM_HOT_RST	= 1<<3, /* Enable PCIe Hot Reset for PSM */
+	PSM_CONFIG_REG1_EN_PSM_PERST	= 1<<2, /* Enable PCIe Reset Event for PSM */
+	PSM_CONFIG_REG1_EN_PSM_PCIE_L1	= 1<<1, /* Enable PCIe L1 Event for PSM */
+	PSM_CONFIG_REG1_EN_PSM		= 1<<0, /* Enable PSM Scheme */
+};
+
+/*	PSM_CONFIG_REG4				0x0168	PSM Config Register 4 */
+enum {
+						/* PHY Link Detect Timer */
+	PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_MSK = 0xf<<4,
+	PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE = 4,
+
+	PSM_CONFIG_REG4_DEBUG_TIMER	    = 1<<1, /* Debug Timer */
+	PSM_CONFIG_REG4_RST_PHY_LINK_DETECT = 1<<0, /* Reset GPHY Link Detect */
+};
+
 
 #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
 			       PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -197,6 +301,9 @@
 	B2_I2C_IRQ	= 0x0168,
 	B2_I2C_SW	= 0x016c,
 
+	Y2_PEX_PHY_DATA = 0x0170,
+	Y2_PEX_PHY_ADDR = 0x0172,
+
 	B3_RAM_ADDR	= 0x0180,
 	B3_RAM_DATA_LO	= 0x0184,
 	B3_RAM_DATA_HI	= 0x0188,
@@ -317,6 +424,10 @@
 	Y2_IS_CHK_TXS2	= 1<<9,		/* Descriptor error TXS 2 */
 	Y2_IS_CHK_TXA2	= 1<<8,		/* Descriptor error TXA 2 */
 
+	Y2_IS_PSM_ACK	= 1<<7,		/* PSM Acknowledge (Yukon-Optima only) */
+	Y2_IS_PTP_TIST	= 1<<6,		/* PTP Time Stamp (Yukon-Optima only) */
+	Y2_IS_PHY_QLNK	= 1<<5,		/* PHY Quick Link (Yukon-Optima only) */
+
 	Y2_IS_IRQ_PHY1	= 1<<4,		/* Interrupt from PHY 1 */
 	Y2_IS_IRQ_MAC1	= 1<<3,		/* Interrupt from MAC 1 */
 	Y2_IS_CHK_RX1	= 1<<2,		/* Descriptor error Rx 1 */
@@ -435,6 +546,7 @@
  	CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
 	CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
 	CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
+	CHIP_ID_YUKON_OPT  = 0xbc, /* YUKON-2 Optima */
 };
 enum yukon_ec_rev {
 	CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */
@@ -459,6 +571,8 @@
 };
 enum yukon_supr_rev {
 	CHIP_REV_YU_SU_A0    = 0,
+	CHIP_REV_YU_SU_B0    = 1,
+	CHIP_REV_YU_SU_B1    = 3,
 };
 
 
@@ -513,6 +627,12 @@
 	TIM_T_STEP	= 1<<0,	/* Test step */
 };
 
+/*	Y2_PEX_PHY_ADDR/DATA		PEX PHY address and data reg  (Yukon-2 only) */
+enum {
+	PEX_RD_ACCESS	= 1<<31, /* Access Mode Read = 1, Write = 0 */
+	PEX_DB_ACCESS	= 1<<30, /* Access to debug register */
+};
+
 /*	B3_RAM_ADDR		32 bit	RAM Address, to read or write */
 					/* Bit 31..19:	reserved */
 #define RAM_ADR_RAN	0x0007ffffL	/* Bit 18.. 0:	RAM Address Range */
@@ -688,10 +808,11 @@
 	RX_GMF_AF_THR	= 0x0c44,/* 32 bit	Rx GMAC FIFO Almost Full Thresh. */
 	RX_GMF_CTRL_T	= 0x0c48,/* 32 bit	Rx GMAC FIFO Control/Test */
 	RX_GMF_FL_MSK	= 0x0c4c,/* 32 bit	Rx GMAC FIFO Flush Mask */
-	RX_GMF_FL_THR	= 0x0c50,/* 32 bit	Rx GMAC FIFO Flush Threshold */
+	RX_GMF_FL_THR	= 0x0c50,/* 16 bit	Rx GMAC FIFO Flush Threshold */
+	RX_GMF_FL_CTRL	= 0x0c52,/* 16 bit	Rx GMAC FIFO Flush Control */
 	RX_GMF_TR_THR	= 0x0c54,/* 32 bit	Rx Truncation Threshold (Yukon-2) */
-	RX_GMF_UP_THR	= 0x0c58,/*  8 bit	Rx Upper Pause Thr (Yukon-EC_U) */
-	RX_GMF_LP_THR	= 0x0c5a,/*  8 bit	Rx Lower Pause Thr (Yukon-EC_U) */
+	RX_GMF_UP_THR	= 0x0c58,/* 16 bit	Rx Upper Pause Thr (Yukon-EC_U) */
+	RX_GMF_LP_THR	= 0x0c5a,/* 16 bit	Rx Lower Pause Thr (Yukon-EC_U) */
 	RX_GMF_VLAN	= 0x0c5c,/* 32 bit	Rx VLAN Type Register (Yukon-2) */
 	RX_GMF_WP	= 0x0c60,/* 32 bit	Rx GMAC FIFO Write Pointer */
 
@@ -754,6 +875,42 @@
 	BMU_TX_CLR_IRQ_TCP	= 1<<11, /* Clear IRQ on TCP segment length mismatch */
 };
 
+/*	TBMU_TEST			0x06B8	Transmit BMU Test Register */
+enum {
+	TBMU_TEST_BMU_TX_CHK_AUTO_OFF		= 1<<31, /* BMU Tx Checksum Auto Calculation Disable */
+	TBMU_TEST_BMU_TX_CHK_AUTO_ON		= 1<<30, /* BMU Tx Checksum Auto Calculation Enable */
+	TBMU_TEST_HOME_ADD_PAD_FIX1_EN		= 1<<29, /* Home Address Paddiing FIX1 Enable */
+	TBMU_TEST_HOME_ADD_PAD_FIX1_DIS		= 1<<28, /* Home Address Paddiing FIX1 Disable */
+	TBMU_TEST_ROUTING_ADD_FIX_EN		= 1<<27, /* Routing Address Fix Enable */
+	TBMU_TEST_ROUTING_ADD_FIX_DIS		= 1<<26, /* Routing Address Fix Disable */
+	TBMU_TEST_HOME_ADD_FIX_EN		= 1<<25, /* Home address checksum fix enable */
+	TBMU_TEST_HOME_ADD_FIX_DIS		= 1<<24, /* Home address checksum fix disable */
+
+	TBMU_TEST_TEST_RSPTR_ON			= 1<<22, /* Testmode Shadow Read Ptr On */
+	TBMU_TEST_TEST_RSPTR_OFF		= 1<<21, /* Testmode Shadow Read Ptr Off */
+	TBMU_TEST_TESTSTEP_RSPTR		= 1<<20, /* Teststep Shadow Read Ptr */
+
+	TBMU_TEST_TEST_RPTR_ON			= 1<<18, /* Testmode Read Ptr On */
+	TBMU_TEST_TEST_RPTR_OFF			= 1<<17, /* Testmode Read Ptr Off */
+	TBMU_TEST_TESTSTEP_RPTR			= 1<<16, /* Teststep Read Ptr */
+
+	TBMU_TEST_TEST_WSPTR_ON			= 1<<14, /* Testmode Shadow Write Ptr On */
+	TBMU_TEST_TEST_WSPTR_OFF		= 1<<13, /* Testmode Shadow Write Ptr Off */
+	TBMU_TEST_TESTSTEP_WSPTR		= 1<<12, /* Teststep Shadow Write Ptr */
+
+	TBMU_TEST_TEST_WPTR_ON			= 1<<10, /* Testmode Write Ptr On */
+	TBMU_TEST_TEST_WPTR_OFF			= 1<<9, /* Testmode Write Ptr Off */
+	TBMU_TEST_TESTSTEP_WPTR			= 1<<8,			/* Teststep Write Ptr */
+
+	TBMU_TEST_TEST_REQ_NB_ON		= 1<<6, /* Testmode Req Nbytes/Addr On */
+	TBMU_TEST_TEST_REQ_NB_OFF		= 1<<5, /* Testmode Req Nbytes/Addr Off */
+	TBMU_TEST_TESTSTEP_REQ_NB		= 1<<4, /* Teststep Req Nbytes/Addr */
+
+	TBMU_TEST_TEST_DONE_IDX_ON		= 1<<2, /* Testmode Done Index On */
+	TBMU_TEST_TEST_DONE_IDX_OFF		= 1<<1, /* Testmode Done Index Off */
+	TBMU_TEST_TESTSTEP_DONE_IDX		= 1<<0,	/* Teststep Done Index */
+};
+
 /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
 /* PREF_UNIT_CTRL	32 bit	Prefetch Control register */
 enum {
@@ -1674,6 +1831,12 @@
 
 /*	RX_GMF_CTRL_T	32 bit	Rx GMAC FIFO Control/Test */
 enum {
+	RX_GCLKMAC_ENA	= 1<<31,	/* RX MAC Clock Gating Enable */
+	RX_GCLKMAC_OFF	= 1<<30,
+
+	RX_STFW_DIS	= 1<<29,	/* RX Store and Forward Enable */
+	RX_STFW_ENA	= 1<<28,
+
 	RX_TRUNC_ON	= 1<<27,  	/* enable  packet truncation */
 	RX_TRUNC_OFF	= 1<<26, 	/* disable packet truncation */
 	RX_VLAN_STRIP_ON = 1<<25,	/* enable  VLAN stripping */
@@ -1711,6 +1874,20 @@
 	GMF_RX_CTRL_DEF	= GMF_OPER_ON | GMF_RX_F_FL_ON,
 };
 
+/*	RX_GMF_FL_CTRL	16 bit	Rx GMAC FIFO Flush Control (Yukon-Supreme) */
+enum {
+	RX_IPV6_SA_MOB_ENA	= 1<<9,	/* IPv6 SA Mobility Support Enable */
+	RX_IPV6_SA_MOB_DIS	= 1<<8,	/* IPv6 SA Mobility Support Disable */
+	RX_IPV6_DA_MOB_ENA	= 1<<7,	/* IPv6 DA Mobility Support Enable */
+	RX_IPV6_DA_MOB_DIS	= 1<<6,	/* IPv6 DA Mobility Support Disable */
+	RX_PTR_SYNCDLY_ENA	= 1<<5,	/* Pointers Delay Synch Enable */
+	RX_PTR_SYNCDLY_DIS	= 1<<4,	/* Pointers Delay Synch Disable */
+	RX_ASF_NEWFLAG_ENA	= 1<<3,	/* RX ASF Flag New Logic Enable */
+	RX_ASF_NEWFLAG_DIS	= 1<<2,	/* RX ASF Flag New Logic Disable */
+	RX_FLSH_MISSPKT_ENA	= 1<<1,	/* RX Flush Miss-Packet Enable */
+	RX_FLSH_MISSPKT_DIS	= 1<<0,	/* RX Flush Miss-Packet Disable */
+};
+
 /*	TX_GMF_EA		32 bit	Tx GMAC FIFO End Address */
 enum {
 	TX_DYN_WM_ENA	= 3,	/* Yukon-FE+ specific */
diff --git a/drivers/net/slip.c b/drivers/net/slip.c
index fe3cebb..ba5bbc5 100644
--- a/drivers/net/slip.c
+++ b/drivers/net/slip.c
@@ -80,6 +80,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/if_arp.h>
 #include <linux/if_slip.h>
+#include <linux/compat.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include "slip.h"
@@ -955,8 +956,8 @@
 			clear_bit(SLF_KEEPTEST, &sl->flags);
 #endif
 
-		if (!test_and_clear_bit(SLF_ERROR, &sl->flags)
-							&& (sl->rcount > 2))
+		if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
+		    (sl->rcount > 2))
 			sl_bump(sl);
 		clear_bit(SLF_ESCAPE, &sl->flags);
 		sl->rcount = 0;
@@ -1038,8 +1039,8 @@
 			clear_bit(SLF_KEEPTEST, &sl->flags);
 #endif
 
-		if (!test_and_clear_bit(SLF_ERROR, &sl->flags)
-							&& (sl->rcount > 2))
+		if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
+		    (sl->rcount > 2))
 			sl_bump(sl);
 		sl->rcount = 0;
 		sl->xbits = 0;
@@ -1169,6 +1170,27 @@
 	}
 }
 
+#ifdef CONFIG_COMPAT
+static long slip_compat_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCGIFNAME:
+	case SIOCGIFENCAP:
+	case SIOCSIFENCAP:
+	case SIOCSIFHWADDR:
+	case SIOCSKEEPALIVE:
+	case SIOCGKEEPALIVE:
+	case SIOCSOUTFILL:
+	case SIOCGOUTFILL:
+		return slip_ioctl(tty, file, cmd,
+				  (unsigned long)compat_ptr(arg));
+	}
+
+	return -ENOIOCTLCMD;
+}
+#endif
+
 /* VSV changes start here */
 #ifdef CONFIG_SLIP_SMART
 /* function do_ioctl called from net/core/dev.c
@@ -1261,6 +1283,9 @@
 	.close	 	= slip_close,
 	.hangup	 	= slip_hangup,
 	.ioctl		= slip_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= slip_compat_ioctl,
+#endif
 	.receive_buf	= slip_receive_buf,
 	.write_wakeup	= slip_write_wakeup,
 };
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index c791ef7..a93f122 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -268,9 +268,9 @@
 		}
 	}
 
-	if(!tirq || !tbase
-	   || (irq && irq != tirq)
-	   || (base_addr && tbase != base_addr))
+	if(!tirq || !tbase ||
+	   (irq && irq != tirq) ||
+	   (base_addr && tbase != base_addr))
 		/* FIXME: we're trying to force the ordering of the
 		 * devices here, there should be a way of getting this
 		 * to happen */
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 2a6b6de..44ebbaa 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -1984,7 +1984,7 @@
 #endif
 
 	/* Grab the IRQ */
-	retval = request_irq(dev->irq, &smc911x_interrupt,
+	retval = request_irq(dev->irq, smc911x_interrupt,
 			     irq_flags, dev->name, dev);
 	if (retval)
 		goto err_out;
diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c
index 934a120..8371b82 100644
--- a/drivers/net/smc9194.c
+++ b/drivers/net/smc9194.c
@@ -1050,7 +1050,7 @@
 	memset(netdev_priv(dev), 0, sizeof(struct smc_local));
 
 	/* Grab the IRQ */
-      	retval = request_irq(dev->irq, &smc_interrupt, 0, DRV_NAME, dev);
+      	retval = request_irq(dev->irq, smc_interrupt, 0, DRV_NAME, dev);
       	if (retval) {
 		printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
 			dev->irq, retval);
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 05c91ee..ae4983a 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2031,7 +2031,7 @@
 	}
 
 	/* Grab the IRQ */
-	retval = request_irq(dev->irq, &smc_interrupt, irq_flags, dev->name, dev);
+	retval = request_irq(dev->irq, smc_interrupt, irq_flags, dev->name, dev);
       	if (retval)
       		goto err_out;
 
@@ -2283,7 +2283,7 @@
 
 	ndev->irq = ires->start;
 
-	if (ires->flags & IRQF_TRIGGER_MASK)
+	if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK)
 		irq_flags = ires->flags & IRQF_TRIGGER_MASK;
 
 	ret = smc_request_attrib(pdev, ndev);
@@ -2365,9 +2365,10 @@
 	return 0;
 }
 
-static int smc_drv_suspend(struct platform_device *dev, pm_message_t state)
+static int smc_drv_suspend(struct device *dev)
 {
-	struct net_device *ndev = platform_get_drvdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
 
 	if (ndev) {
 		if (netif_running(ndev)) {
@@ -2379,9 +2380,10 @@
 	return 0;
 }
 
-static int smc_drv_resume(struct platform_device *dev)
+static int smc_drv_resume(struct device *dev)
 {
-	struct net_device *ndev = platform_get_drvdata(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	struct net_device *ndev = platform_get_drvdata(pdev);
 
 	if (ndev) {
 		struct smc_local *lp = netdev_priv(ndev);
@@ -2397,14 +2399,18 @@
 	return 0;
 }
 
+static struct dev_pm_ops smc_drv_pm_ops = {
+	.suspend	= smc_drv_suspend,
+	.resume		= smc_drv_resume,
+};
+
 static struct platform_driver smc_driver = {
 	.probe		= smc_drv_probe,
 	.remove		= __devexit_p(smc_drv_remove),
-	.suspend	= smc_drv_suspend,
-	.resume		= smc_drv_resume,
 	.driver		= {
 		.name	= CARDNAME,
 		.owner	= THIS_MODULE,
+		.pm	= &smc_drv_pm_ops,
 	},
 };
 
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 3911be7..7815bfc 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -158,8 +158,8 @@
 #define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
 #define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
-#elif	defined(CONFIG_MACH_LOGICPD_PXA270) \
-	|| defined(CONFIG_MACH_NOMADIK_8815NHK)
+#elif	defined(CONFIG_MACH_LOGICPD_PXA270) ||	\
+	defined(CONFIG_MACH_NOMADIK_8815NHK)
 
 #define SMC_CAN_USE_8BIT	0
 #define SMC_CAN_USE_16BIT	1
@@ -258,9 +258,9 @@
 #define RPC_LSA_DEFAULT		RPC_LED_TX_RX
 #define RPC_LSB_DEFAULT		RPC_LED_100_10
 
-#elif   defined(CONFIG_MACH_LPD79520) \
-     || defined(CONFIG_MACH_LPD7A400) \
-     || defined(CONFIG_MACH_LPD7A404)
+#elif   defined(CONFIG_MACH_LPD79520) ||	\
+	defined(CONFIG_MACH_LPD7A400) ||	\
+	defined(CONFIG_MACH_LPD7A404)
 
 /* The LPD7X_IOBARRIER is necessary to overcome a mismatch between the
  * way that the CPU handles chip selects and the way that the SMC chip
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index f9cdcbc..4d0d5c5 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -748,8 +748,8 @@
 			 * usage is 10/100 indicator */
 			pdata->gpio_setting = smsc911x_reg_read(pdata,
 				GPIO_CFG);
-			if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_)
-			    && (!pdata->using_extphy)) {
+			if ((pdata->gpio_setting & GPIO_CFG_LED1_EN_) &&
+			    (!pdata->using_extphy)) {
 				/* Force 10/100 LED off, after saving
 				 * orginal GPIO configuration */
 				pdata->gpio_orig_setting = pdata->gpio_setting;
@@ -2071,6 +2071,9 @@
 	if (is_valid_ether_addr(dev->dev_addr)) {
 		smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
 		SMSC_TRACE(PROBE, "MAC Address is specified by configuration");
+	} else if (is_valid_ether_addr(pdata->config.mac)) {
+		memcpy(dev->dev_addr, pdata->config.mac, 6);
+		SMSC_TRACE(PROBE, "MAC Address specified by platform data");
 	} else {
 		/* Try reading mac address from device. if EEPROM is present
 		 * it will already have been set */
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index b4909a2..12f0f5d 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -252,6 +252,9 @@
 {
 	struct smsc9420_pdata *pd = netdev_priv(dev);
 
+	if (!pd->phy_dev)
+		return -ENODEV;
+
 	cmd->maxtxpkt = 1;
 	cmd->maxrxpkt = 1;
 	return phy_ethtool_gset(pd->phy_dev, cmd);
@@ -262,6 +265,9 @@
 {
 	struct smsc9420_pdata *pd = netdev_priv(dev);
 
+	if (!pd->phy_dev)
+		return -ENODEV;
+
 	return phy_ethtool_sset(pd->phy_dev, cmd);
 }
 
@@ -290,6 +296,10 @@
 static int smsc9420_ethtool_nway_reset(struct net_device *netdev)
 {
 	struct smsc9420_pdata *pd = netdev_priv(netdev);
+
+	if (!pd->phy_dev)
+		return -ENODEV;
+
 	return phy_start_aneg(pd->phy_dev);
 }
 
@@ -312,6 +322,10 @@
 	for (i = 0; i < 0x100; i += (sizeof(u32)))
 		data[j++] = smsc9420_reg_read(pd, i);
 
+	// cannot read phy registers if the net device is down
+	if (!phy_dev)
+		return;
+
 	for (i = 0; i <= 31; i++)
 		data[j++] = smsc9420_mii_read(phy_dev->bus, phy_dev->addr, i);
 }
@@ -1161,7 +1175,7 @@
 		phydev->phy_id);
 
 	phydev = phy_connect(dev, dev_name(&phydev->dev),
-		&smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII);
+		smsc9420_phy_adjust_link, 0, PHY_INTERFACE_MODE_MII);
 
 	if (IS_ERR(phydev)) {
 		pr_err("%s: Could not attach to PHY\n", dev->name);
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 90e663f..782910c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -57,6 +57,7 @@
 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(VERSION);
+MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME);
 
 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index a36e2b5..95db60a 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -928,7 +928,7 @@
 
 	/* Do we ever need to reset the chip??? */
 
-	retval = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
+	retval = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
 	if (retval)
 		return retval;
 
@@ -1482,8 +1482,8 @@
 			printk(KERN_DEBUG "  netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota);
 		/* Check if the packet is long enough to accept without copying
 		   to a minimally-sized skbuff. */
-		if (pkt_len < rx_copybreak
-		    && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+		if (pkt_len < rx_copybreak &&
+		    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 			skb_reserve(skb, 2);	/* 16 byte align the IP header */
 			pci_dma_sync_single_for_cpu(np->pci_dev,
 						    np->rx_info[entry].mapping,
@@ -1793,8 +1793,8 @@
 
 	if (dev->flags & IFF_PROMISC) {	/* Set promiscuous. */
 		rx_mode |= AcceptAll;
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		rx_mode |= AcceptBroadcast|AcceptAllMulticast|PerfectFilter;
 	} else if (dev->mc_count <= 14) {
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index c2f14dc..508fba8 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -416,13 +416,8 @@
 	unsigned int txsize = priv->dma_tx_size;
 	unsigned int rxsize = priv->dma_rx_size;
 	unsigned int bfsize = priv->dma_buf_sz;
-	int buff2_needed = 0;
-	int dis_ic = 0;
+	int buff2_needed = 0, dis_ic = 0;
 
-#ifdef CONFIG_STMMAC_TIMER
-	/* Using Timers disable interrupts on completion for the reception */
-	dis_ic = 1;
-#endif
 	/* Set the Buffer size according to the MTU;
 	 * indeed, in case of jumbo we need to bump-up the buffer sizes.
 	 */
@@ -437,6 +432,11 @@
 	else
 		bfsize = DMA_BUFFER_SIZE;
 
+#ifdef CONFIG_STMMAC_TIMER
+	/* Disable interrupts on completion for the reception if timer is on */
+	if (likely(priv->tm->enable))
+		dis_ic = 1;
+#endif
 	/* If the MTU exceeds 8k so use the second buffer in the chain */
 	if (bfsize >= BUF_SIZE_8KiB)
 		buff2_needed = 1;
@@ -809,20 +809,22 @@
 
 static inline void stmmac_enable_irq(struct stmmac_priv *priv)
 {
-#ifndef CONFIG_STMMAC_TIMER
-	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
-#else
-	priv->tm->timer_start(tmrate);
+#ifdef CONFIG_STMMAC_TIMER
+	if (likely(priv->tm->enable))
+		priv->tm->timer_start(tmrate);
+	else
 #endif
+	writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
 }
 
 static inline void stmmac_disable_irq(struct stmmac_priv *priv)
 {
-#ifndef CONFIG_STMMAC_TIMER
-	writel(0, priv->dev->base_addr + DMA_INTR_ENA);
-#else
-	priv->tm->timer_stop();
+#ifdef CONFIG_STMMAC_TIMER
+	if (likely(priv->tm->enable))
+		priv->tm->timer_stop();
+	else
 #endif
+	writel(0, priv->dev->base_addr + DMA_INTR_ENA);
 }
 
 static int stmmac_has_work(struct stmmac_priv *priv)
@@ -920,8 +922,7 @@
 		DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
 		if (unlikely(intr_status & DMA_STATUS_UNF)) {
 			DBG(intr, INFO, "transmit underflow\n");
-			if (unlikely(tc != SF_DMA_MODE)
-			    && (tc <= 256)) {
+			if (unlikely(tc != SF_DMA_MODE) && (tc <= 256)) {
 				/* Try to bump up the threshold */
 				tc += 64;
 				priv->mac_type->ops->dma_mode(ioaddr, tc,
@@ -1022,7 +1023,7 @@
 	}
 
 	/* Request the IRQ lines */
-	ret = request_irq(dev->irq, &stmmac_interrupt,
+	ret = request_irq(dev->irq, stmmac_interrupt,
 			  IRQF_SHARED, dev->name, dev);
 	if (unlikely(ret < 0)) {
 		pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
@@ -1031,22 +1032,23 @@
 	}
 
 #ifdef CONFIG_STMMAC_TIMER
-	priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+	priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
 	if (unlikely(priv->tm == NULL)) {
 		pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
 		return -ENOMEM;
 	}
 	priv->tm->freq = tmrate;
 
-	/* Test if the HW timer can be actually used.
-	 * In case of failure continue with no timer. */
+	/* Test if the external timer can be actually used.
+	 * In case of failure continue without timer. */
 	if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
-		pr_warning("stmmaceth: cannot attach the HW timer\n");
+		pr_warning("stmmaceth: cannot attach the external timer.\n");
 		tmrate = 0;
 		priv->tm->freq = 0;
 		priv->tm->timer_start = stmmac_no_timer_started;
 		priv->tm->timer_stop = stmmac_no_timer_stopped;
-	}
+	} else
+		priv->tm->enable = 1;
 #endif
 
 	/* Create and initialize the TX/RX descriptors chains. */
@@ -1322,9 +1324,11 @@
 
 	/* Interrupt on completition only for the latest segment */
 	priv->mac_type->ops->close_tx_desc(desc);
+
 #ifdef CONFIG_STMMAC_TIMER
-	/* Clean IC while using timers */
-	priv->mac_type->ops->clear_tx_ic(desc);
+	/* Clean IC while using timer */
+	if (likely(priv->tm->enable))
+		priv->mac_type->ops->clear_tx_ic(desc);
 #endif
 	/* To avoid raise condition */
 	priv->mac_type->ops->set_tx_owner(first);
@@ -2028,7 +2032,8 @@
 
 #ifdef CONFIG_STMMAC_TIMER
 		priv->tm->timer_stop();
-		dis_ic = 1;
+		if (likely(priv->tm->enable))
+			dis_ic = 1;
 #endif
 		napi_disable(&priv->napi);
 
diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c
index b838c65..679f61f 100644
--- a/drivers/net/stmmac/stmmac_timer.c
+++ b/drivers/net/stmmac/stmmac_timer.c
@@ -63,7 +63,7 @@
 
 	stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
 	if (stmmac_rtc == NULL) {
-		pr_error("open rtc device failed\n");
+		pr_err("open rtc device failed\n");
 		return -ENODEV;
 	}
 
@@ -71,7 +71,7 @@
 
 	/* Periodic mode is not supported */
 	if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) {
-		pr_error("set periodic failed\n");
+		pr_err("set periodic failed\n");
 		rtc_irq_unregister(stmmac_rtc, &stmmac_task);
 		rtc_class_close(stmmac_rtc);
 		return -1;
diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h
index f795cae..6863590 100644
--- a/drivers/net/stmmac/stmmac_timer.h
+++ b/drivers/net/stmmac/stmmac_timer.h
@@ -26,6 +26,7 @@
 	void (*timer_start) (unsigned int new_freq);
 	void (*timer_stop) (void);
 	unsigned int freq;
+	unsigned int enable;
 };
 
 /* Open the HW timer device and return 0 in case of success */
diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c
index 2f1eaaf..b447a87 100644
--- a/drivers/net/sun3_82586.c
+++ b/drivers/net/sun3_82586.c
@@ -191,7 +191,7 @@
 	startrecv586(dev);
 	sun3_enaint();
 
-	ret = request_irq(dev->irq, &sun3_82586_interrupt,0,dev->name,dev);
+	ret = request_irq(dev->irq, sun3_82586_interrupt,0,dev->name,dev);
 	if (ret)
 	{
 		sun3_reset586();
diff --git a/drivers/net/sunbmac.c b/drivers/net/sunbmac.c
index 536cf7e..25e81eb 100644
--- a/drivers/net/sunbmac.c
+++ b/drivers/net/sunbmac.c
@@ -919,7 +919,7 @@
 	struct bigmac *bp = netdev_priv(dev);
 	int ret;
 
-	ret = request_irq(dev->irq, &bigmac_interrupt, IRQF_SHARED, dev->name, bp);
+	ret = request_irq(dev->irq, bigmac_interrupt, IRQF_SHARED, dev->name, bp);
 	if (ret) {
 		printk(KERN_ERR "BIGMAC: Can't order irq %d to go.\n", dev->irq);
 		return ret;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index e13685a..d58e189 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -603,8 +603,8 @@
 			    strcmp (media[card_idx], "4") == 0) {
 				np->speed = 100;
 				np->mii_if.full_duplex = 1;
-			} else if (strcmp (media[card_idx], "100mbps_hd") == 0
-				   || strcmp (media[card_idx], "3") == 0) {
+			} else if (strcmp (media[card_idx], "100mbps_hd") == 0 ||
+				   strcmp (media[card_idx], "3") == 0) {
 				np->speed = 100;
 				np->mii_if.full_duplex = 0;
 			} else if (strcmp (media[card_idx], "10mbps_fd") == 0 ||
@@ -819,7 +819,7 @@
 
 	/* Do we need to reset the chip??? */
 
-	i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
+	i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
 	if (i)
 		return i;
 
@@ -1079,8 +1079,8 @@
 	tasklet_schedule(&np->tx_tasklet);
 
 	/* On some architectures: explicitly flush cache lines here. */
-	if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1
-			&& !netif_queue_stopped(dev)) {
+	if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 &&
+	    !netif_queue_stopped(dev)) {
 		/* do nothing */
 	} else {
 		netif_stop_queue (dev);
@@ -1336,8 +1336,8 @@
 #endif
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak
-				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 				pci_dma_sync_single_for_cpu(np->pci_dev,
 							    le32_to_cpu(desc->frag[0].addr),
@@ -1517,8 +1517,8 @@
 	if (dev->flags & IFF_PROMISC) {			/* Set promiscuous. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys;
-	} else if ((dev->mc_count > multicast_filter_limit)
-			   ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 61640b9..b571a1b 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1034,10 +1034,8 @@
 			(csum_stuff_off << 21));
 	}
 
-	local_irq_save(flags);
-	if (!spin_trylock(&gp->tx_lock)) {
+	if (!spin_trylock_irqsave(&gp->tx_lock, flags)) {
 		/* Tell upper layer to requeue */
-		local_irq_restore(flags);
 		return NETDEV_TX_LOCKED;
 	}
 	/* We raced with gem_do_stop() */
diff --git a/drivers/net/sungem.h b/drivers/net/sungem.h
index f7a0291..1990546 100644
--- a/drivers/net/sungem.h
+++ b/drivers/net/sungem.h
@@ -1031,8 +1031,8 @@
 #endif
 };
 
-#define found_mii_phy(gp) ((gp->phy_type == phy_mii_mdio0 || gp->phy_type == phy_mii_mdio1) \
-				&& gp->phy_mii.def && gp->phy_mii.def->ops)
+#define found_mii_phy(gp) ((gp->phy_type == phy_mii_mdio0 || gp->phy_type == phy_mii_mdio1) && \
+			   gp->phy_mii.def && gp->phy_mii.def->ops)
 
 #define ALIGNED_RX_SKB_ADDR(addr) \
         ((((unsigned long)(addr) + (64UL - 1UL)) & ~(64UL - 1UL)) - (unsigned long)(addr))
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 37d721b..6762f1c 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -1226,10 +1226,16 @@
 			for (frag = 0; frag <= skb_shinfo(skb)->nr_frags; frag++) {
 				txd = &hp->happy_block->happy_meal_txd[i];
 				dma_addr = hme_read_desc32(hp, &txd->tx_addr);
-				dma_unmap_single(hp->dma_dev, dma_addr,
-						 (hme_read_desc32(hp, &txd->tx_flags)
-						  & TXFLAG_SIZE),
-						 DMA_TO_DEVICE);
+				if (!frag)
+					dma_unmap_single(hp->dma_dev, dma_addr,
+							 (hme_read_desc32(hp, &txd->tx_flags)
+							  & TXFLAG_SIZE),
+							 DMA_TO_DEVICE);
+				else
+					dma_unmap_page(hp->dma_dev, dma_addr,
+							 (hme_read_desc32(hp, &txd->tx_flags)
+							  & TXFLAG_SIZE),
+							 DMA_TO_DEVICE);
 
 				if (frag != skb_shinfo(skb)->nr_frags)
 					i++;
@@ -1953,7 +1959,10 @@
 			dma_len = hme_read_desc32(hp, &this->tx_flags);
 
 			dma_len &= TXFLAG_SIZE;
-			dma_unmap_single(hp->dma_dev, dma_addr, dma_len, DMA_TO_DEVICE);
+			if (!frag)
+				dma_unmap_single(hp->dma_dev, dma_addr, dma_len, DMA_TO_DEVICE);
+			else
+				dma_unmap_page(hp->dma_dev, dma_addr, dma_len, DMA_TO_DEVICE);
 
 			elem = NEXT_TX(elem);
 			this = &txbase[elem];
@@ -2184,7 +2193,7 @@
 	 * into a single source which we register handling at probe time.
 	 */
 	if ((hp->happy_flags & (HFLAG_QUATTRO|HFLAG_PCI)) != HFLAG_QUATTRO) {
-		if (request_irq(dev->irq, &happy_meal_interrupt,
+		if (request_irq(dev->irq, happy_meal_interrupt,
 				IRQF_SHARED, dev->name, (void *)dev)) {
 			HMD(("EAGAIN\n"));
 			printk(KERN_ERR "happy_meal(SBUS): Can't order irq %d to go.\n",
@@ -3047,9 +3056,9 @@
 		int len;
 
 		if (qfe_slot != -1 &&
-		    (addr = of_get_property(dp,
-					    "local-mac-address", &len)) != NULL
-		    && len == 6) {
+		    (addr = of_get_property(dp, "local-mac-address", &len))
+			!= NULL &&
+		    len == 6) {
 			memcpy(dev->dev_addr, addr, 6);
 		} else {
 			memcpy(dev->dev_addr, idprom->id_ethaddr, 6);
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 9d6fd47..64e7d08 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -923,7 +923,7 @@
 
 	STOP_LANCE(lp);
 
-	if (request_irq(dev->irq, &lance_interrupt, IRQF_SHARED,
+	if (request_irq(dev->irq, lance_interrupt, IRQF_SHARED,
 			lancestr, (void *) dev)) {
 		printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq);
 		return -EAGAIN;
diff --git a/drivers/net/sunqe.c b/drivers/net/sunqe.c
index dcefb60..45c383f 100644
--- a/drivers/net/sunqe.c
+++ b/drivers/net/sunqe.c
@@ -807,7 +807,7 @@
 
 			qec_init_once(qecp, op);
 
-			if (request_irq(op->irqs[0], &qec_interrupt,
+			if (request_irq(op->irqs[0], qec_interrupt,
 					IRQF_SHARED, "qec", (void *) qecp)) {
 				printk(KERN_ERR "qec: Can't register irq.\n");
 				goto fail;
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d1298e5..75a669d 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -22,11 +22,7 @@
  * All Rights Reserved.
  */
 
-#ifdef TC35815_NAPI
-#define DRV_VERSION	"1.38-NAPI"
-#else
-#define DRV_VERSION	"1.38"
-#endif
+#define DRV_VERSION	"1.39"
 static const char *version = "tc35815.c:v" DRV_VERSION "\n";
 #define MODNAME			"tc35815"
 
@@ -54,13 +50,6 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-/* First, a few definitions that the brave might change. */
-
-#define GATHER_TXINT	/* On-Demand Tx Interrupt */
-#define WORKAROUND_LOSTCAR
-#define WORKAROUND_100HALF_PROMISC
-/* #define TC35815_USE_PACKEDBUFFER */
-
 enum tc35815_chiptype {
 	TC35815CF = 0,
 	TC35815_NWU,
@@ -330,17 +319,10 @@
 
 
 /* Some useful constants. */
-#undef NO_CHECK_CARRIER	/* Does not check No-Carrier with TP */
 
-#ifdef NO_CHECK_CARRIER
-#define TX_CTL_CMD	(Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
-	Tx_EnExColl | Tx_EnExDefer | Tx_EnUnder | \
-	Tx_En)	/* maybe  0x7b01 */
-#else
-#define TX_CTL_CMD	(Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
+#define TX_CTL_CMD	(Tx_EnTxPar | Tx_EnLateColl | \
 	Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \
 	Tx_En)	/* maybe  0x7b01 */
-#endif
 /* Do not use Rx_StripCRC -- it causes trouble on BLEx/FDAEx condition */
 #define RX_CTL_CMD	(Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \
 	| Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */
@@ -361,13 +343,6 @@
 #define TX_THRESHOLD_KEEP_LIMIT 10
 
 /* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
-#ifdef TC35815_USE_PACKEDBUFFER
-#define FD_PAGE_NUM 2
-#define RX_BUF_NUM	8	/* >= 2 */
-#define RX_FD_NUM	250	/* >= 32 */
-#define TX_FD_NUM	128
-#define RX_BUF_SIZE	PAGE_SIZE
-#else /* TC35815_USE_PACKEDBUFFER */
 #define FD_PAGE_NUM 4
 #define RX_BUF_NUM	128	/* < 256 */
 #define RX_FD_NUM	256	/* >= 32 */
@@ -381,7 +356,6 @@
 #define RX_BUF_SIZE	\
 	L1_CACHE_ALIGN(ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN + NET_IP_ALIGN)
 #endif
-#endif /* TC35815_USE_PACKEDBUFFER */
 #define RX_FD_RESERVE	(2 / 2)	/* max 2 BD per RxFD */
 #define NAPI_WEIGHT	16
 
@@ -439,11 +413,7 @@
 	/*
 	 * Transmitting: Batch Mode.
 	 *	1 BD in 1 TxFD.
-	 * Receiving: Packing Mode. (TC35815_USE_PACKEDBUFFER)
-	 *	1 circular FD for Free Buffer List.
-	 *	RX_BUF_NUM BD in Free Buffer FD.
-	 *	One Free Buffer BD has PAGE_SIZE data buffer.
-	 * Or Non-Packing Mode.
+	 * Receiving: Non-Packing Mode.
 	 *	1 circular FD for Free Buffer List.
 	 *	RX_BUF_NUM BD in Free Buffer FD.
 	 *	One Free Buffer BD has ETH_FRAME_LEN data buffer.
@@ -457,21 +427,11 @@
 	struct RxFD *rfd_limit;
 	struct RxFD *rfd_cur;
 	struct FrFD *fbl_ptr;
-#ifdef TC35815_USE_PACKEDBUFFER
-	unsigned char fbl_curid;
-	void *data_buf[RX_BUF_NUM];		/* packing */
-	dma_addr_t data_buf_dma[RX_BUF_NUM];
-	struct {
-		struct sk_buff *skb;
-		dma_addr_t skb_dma;
-	} tx_skbs[TX_FD_NUM];
-#else
 	unsigned int fbl_count;
 	struct {
 		struct sk_buff *skb;
 		dma_addr_t skb_dma;
 	} tx_skbs[TX_FD_NUM], rx_skbs[RX_BUF_NUM];
-#endif
 	u32 msg_enable;
 	enum tc35815_chiptype chiptype;
 };
@@ -486,51 +446,6 @@
 	return (void *)((u8 *)lp->fd_buf + (bus - lp->fd_buf_dma));
 }
 #endif
-#ifdef TC35815_USE_PACKEDBUFFER
-static inline void *rxbuf_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus)
-{
-	int i;
-	for (i = 0; i < RX_BUF_NUM; i++) {
-		if (bus >= lp->data_buf_dma[i] &&
-		    bus < lp->data_buf_dma[i] + PAGE_SIZE)
-			return (void *)((u8 *)lp->data_buf[i] +
-					(bus - lp->data_buf_dma[i]));
-	}
-	return NULL;
-}
-
-#define TC35815_DMA_SYNC_ONDEMAND
-static void *alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
-{
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-	void *buf;
-	/* pci_map + pci_dma_sync will be more effective than
-	 * pci_alloc_consistent on some archs. */
-	buf = (void *)__get_free_page(GFP_ATOMIC);
-	if (!buf)
-		return NULL;
-	*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
-				     PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
-		free_page((unsigned long)buf);
-		return NULL;
-	}
-	return buf;
-#else
-	return pci_alloc_consistent(hwdev, PAGE_SIZE, dma_handle);
-#endif
-}
-
-static void free_rxbuf_page(struct pci_dev *hwdev, void *buf, dma_addr_t dma_handle)
-{
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-	pci_unmap_single(hwdev, dma_handle, PAGE_SIZE, PCI_DMA_FROMDEVICE);
-	free_page((unsigned long)buf);
-#else
-	pci_free_consistent(hwdev, PAGE_SIZE, buf, dma_handle);
-#endif
-}
-#else /* TC35815_USE_PACKEDBUFFER */
 static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev,
 				       struct pci_dev *hwdev,
 				       dma_addr_t *dma_handle)
@@ -555,19 +470,14 @@
 			 PCI_DMA_FROMDEVICE);
 	dev_kfree_skb_any(skb);
 }
-#endif /* TC35815_USE_PACKEDBUFFER */
 
 /* Index to functions, as function prototypes. */
 
 static int	tc35815_open(struct net_device *dev);
 static int	tc35815_send_packet(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t	tc35815_interrupt(int irq, void *dev_id);
-#ifdef TC35815_NAPI
 static int	tc35815_rx(struct net_device *dev, int limit);
 static int	tc35815_poll(struct napi_struct *napi, int budget);
-#else
-static void	tc35815_rx(struct net_device *dev);
-#endif
 static void	tc35815_txdone(struct net_device *dev);
 static int	tc35815_close(struct net_device *dev);
 static struct	net_device_stats *tc35815_get_stats(struct net_device *dev);
@@ -654,8 +564,6 @@
 		 * TX4939 PCFG.SPEEDn bit will be changed on
 		 * NETDEV_CHANGE event.
 		 */
-
-#if !defined(NO_CHECK_CARRIER) && defined(WORKAROUND_LOSTCAR)
 		/*
 		 * WORKAROUND: enable LostCrS only if half duplex
 		 * operation.
@@ -665,7 +573,6 @@
 		    lp->chiptype != TC35815_TX4939)
 			tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr,
 				  &tr->Tx_Ctl);
-#endif
 
 		lp->speed = phydev->speed;
 		lp->duplex = phydev->duplex;
@@ -674,11 +581,9 @@
 
 	if (phydev->link != lp->link) {
 		if (phydev->link) {
-#ifdef WORKAROUND_100HALF_PROMISC
 			/* delayed promiscuous enabling */
 			if (dev->flags & IFF_PROMISC)
 				tc35815_set_multicast_list(dev);
-#endif
 		} else {
 			lp->speed = 0;
 			lp->duplex = -1;
@@ -923,9 +828,7 @@
 	dev->netdev_ops = &tc35815_netdev_ops;
 	dev->ethtool_ops = &tc35815_ethtool_ops;
 	dev->watchdog_timeo = TC35815_TX_TIMEOUT;
-#ifdef TC35815_NAPI
 	netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT);
-#endif
 
 	dev->irq = pdev->irq;
 	dev->base_addr = (unsigned long)ioaddr;
@@ -1007,25 +910,6 @@
 		if (!lp->fd_buf)
 			return -ENOMEM;
 		for (i = 0; i < RX_BUF_NUM; i++) {
-#ifdef TC35815_USE_PACKEDBUFFER
-			lp->data_buf[i] =
-				alloc_rxbuf_page(lp->pci_dev,
-						 &lp->data_buf_dma[i]);
-			if (!lp->data_buf[i]) {
-				while (--i >= 0) {
-					free_rxbuf_page(lp->pci_dev,
-							lp->data_buf[i],
-							lp->data_buf_dma[i]);
-					lp->data_buf[i] = NULL;
-				}
-				pci_free_consistent(lp->pci_dev,
-						    PAGE_SIZE * FD_PAGE_NUM,
-						    lp->fd_buf,
-						    lp->fd_buf_dma);
-				lp->fd_buf = NULL;
-				return -ENOMEM;
-			}
-#else
 			lp->rx_skbs[i].skb =
 				alloc_rxbuf_skb(dev, lp->pci_dev,
 						&lp->rx_skbs[i].skb_dma);
@@ -1043,15 +927,9 @@
 				lp->fd_buf = NULL;
 				return -ENOMEM;
 			}
-#endif
 		}
 		printk(KERN_DEBUG "%s: FD buf %p DataBuf",
 		       dev->name, lp->fd_buf);
-#ifdef TC35815_USE_PACKEDBUFFER
-		printk(" DataBuf");
-		for (i = 0; i < RX_BUF_NUM; i++)
-			printk(" %p", lp->data_buf[i]);
-#endif
 		printk("\n");
 	} else {
 		for (i = 0; i < FD_PAGE_NUM; i++)
@@ -1084,7 +962,6 @@
 	lp->fbl_ptr = (struct FrFD *)fd_addr;
 	lp->fbl_ptr->fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, lp->fbl_ptr));
 	lp->fbl_ptr->fd.FDCtl = cpu_to_le32(RX_BUF_NUM | FD_CownsFD);
-#ifndef TC35815_USE_PACKEDBUFFER
 	/*
 	 * move all allocated skbs to head of rx_skbs[] array.
 	 * fbl_count mighe not be RX_BUF_NUM if alloc_rxbuf_skb() in
@@ -1102,11 +979,7 @@
 			lp->fbl_count++;
 		}
 	}
-#endif
 	for (i = 0; i < RX_BUF_NUM; i++) {
-#ifdef TC35815_USE_PACKEDBUFFER
-		lp->fbl_ptr->bd[i].BuffData = cpu_to_le32(lp->data_buf_dma[i]);
-#else
 		if (i >= lp->fbl_count) {
 			lp->fbl_ptr->bd[i].BuffData = 0;
 			lp->fbl_ptr->bd[i].BDCtl = 0;
@@ -1114,15 +987,11 @@
 		}
 		lp->fbl_ptr->bd[i].BuffData =
 			cpu_to_le32(lp->rx_skbs[i].skb_dma);
-#endif
 		/* BDID is index of FrFD.bd[] */
 		lp->fbl_ptr->bd[i].BDCtl =
 			cpu_to_le32(BD_CownsBD | (i << BD_RxBDID_SHIFT) |
 				    RX_BUF_SIZE);
 	}
-#ifdef TC35815_USE_PACKEDBUFFER
-	lp->fbl_curid = 0;
-#endif
 
 	printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n",
 	       dev->name, lp->tfd_base, lp->rfd_base, lp->fbl_ptr);
@@ -1196,19 +1065,11 @@
 	lp->fbl_ptr = NULL;
 
 	for (i = 0; i < RX_BUF_NUM; i++) {
-#ifdef TC35815_USE_PACKEDBUFFER
-		if (lp->data_buf[i]) {
-			free_rxbuf_page(lp->pci_dev,
-					lp->data_buf[i], lp->data_buf_dma[i]);
-			lp->data_buf[i] = NULL;
-		}
-#else
 		if (lp->rx_skbs[i].skb) {
 			free_rxbuf_skb(lp->pci_dev, lp->rx_skbs[i].skb,
 				       lp->rx_skbs[i].skb_dma);
 			lp->rx_skbs[i].skb = NULL;
 		}
-#endif
 	}
 	if (lp->fd_buf) {
 		pci_free_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM,
@@ -1254,7 +1115,7 @@
 	return bd_count;
 }
 
-#if defined(DEBUG) || defined(TC35815_USE_PACKEDBUFFER)
+#ifdef DEBUG
 static void
 dump_frfd(struct FrFD *fd)
 {
@@ -1271,9 +1132,7 @@
 		       le32_to_cpu(fd->bd[i].BDCtl));
 	printk("\n");
 }
-#endif
 
-#ifdef DEBUG
 static void
 panic_queues(struct net_device *dev)
 {
@@ -1389,7 +1248,7 @@
 	 * This is used if the interrupt line can turned off (shared).
 	 * See 3c503.c for an example of selecting the IRQ at config-time.
 	 */
-	if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED,
+	if (request_irq(dev->irq, tc35815_interrupt, IRQF_SHARED,
 			dev->name, dev))
 		return -EAGAIN;
 
@@ -1400,9 +1259,7 @@
 		return -EAGAIN;
 	}
 
-#ifdef TC35815_NAPI
 	napi_enable(&lp->napi);
-#endif
 
 	/* Reset the hardware here. Don't forget to set the station address. */
 	spin_lock_irq(&lp->lock);
@@ -1478,9 +1335,7 @@
 			(struct tc35815_regs __iomem *)dev->base_addr;
 		/* Start DMA Transmitter. */
 		txfd->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
-#ifdef GATHER_TXINT
 		txfd->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
-#endif
 		if (netif_msg_tx_queued(lp)) {
 			printk("%s: starting TxFD.\n", dev->name);
 			dump_txfd(txfd);
@@ -1536,11 +1391,7 @@
 	tc35815_schedule_restart(dev);
 }
 
-#ifdef TC35815_NAPI
 static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
-#else
-static int tc35815_do_interrupt(struct net_device *dev, u32 status)
-#endif
 {
 	struct tc35815_local *lp = netdev_priv(dev);
 	int ret = -1;
@@ -1579,12 +1430,7 @@
 	/* normal notification */
 	if (status & Int_IntMacRx) {
 		/* Got a packet(s). */
-#ifdef TC35815_NAPI
 		ret = tc35815_rx(dev, limit);
-#else
-		tc35815_rx(dev);
-		ret = 0;
-#endif
 		lp->lstats.rx_ints++;
 	}
 	if (status & Int_IntMacTx) {
@@ -1592,7 +1438,8 @@
 		lp->lstats.tx_ints++;
 		tc35815_txdone(dev);
 		netif_wake_queue(dev);
-		ret = 0;
+		if (ret < 0)
+			ret = 0;
 	}
 	return ret;
 }
@@ -1607,7 +1454,6 @@
 	struct tc35815_local *lp = netdev_priv(dev);
 	struct tc35815_regs __iomem *tr =
 		(struct tc35815_regs __iomem *)dev->base_addr;
-#ifdef TC35815_NAPI
 	u32 dmactl = tc_readl(&tr->DMA_Ctl);
 
 	if (!(dmactl & DMA_IntMask)) {
@@ -1624,22 +1470,6 @@
 		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;
-#else
-	int handled;
-	u32 status;
-
-	spin_lock(&lp->lock);
-	status = tc_readl(&tr->Int_Src);
-	/* BLEx, FDAEx will be cleared later */
-	tc_writel(status & ~(Int_BLEx | Int_FDAEx),
-		  &tr->Int_Src);	/* write to clear */
-	handled = tc35815_do_interrupt(dev, status);
-	if (status & (Int_BLEx | Int_FDAEx))
-		tc_writel(status & (Int_BLEx | Int_FDAEx), &tr->Int_Src);
-	(void)tc_readl(&tr->Int_Src);	/* flush */
-	spin_unlock(&lp->lock);
-	return IRQ_RETVAL(handled >= 0);
-#endif /* TC35815_NAPI */
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1652,20 +1482,13 @@
 #endif
 
 /* We have a good packet(s), get it/them out of the buffers. */
-#ifdef TC35815_NAPI
 static int
 tc35815_rx(struct net_device *dev, int limit)
-#else
-static void
-tc35815_rx(struct net_device *dev)
-#endif
 {
 	struct tc35815_local *lp = netdev_priv(dev);
 	unsigned int fdctl;
 	int i;
-#ifdef TC35815_NAPI
 	int received = 0;
-#endif
 
 	while (!((fdctl = le32_to_cpu(lp->rfd_cur->fd.FDCtl)) & FD_CownsFD)) {
 		int status = le32_to_cpu(lp->rfd_cur->fd.FDStat);
@@ -1684,52 +1507,9 @@
 			struct sk_buff *skb;
 			unsigned char *data;
 			int cur_bd;
-#ifdef TC35815_USE_PACKEDBUFFER
-			int offset;
-#endif
 
-#ifdef TC35815_NAPI
 			if (--limit < 0)
 				break;
-#endif
-#ifdef TC35815_USE_PACKEDBUFFER
-			BUG_ON(bd_count > 2);
-			skb = dev_alloc_skb(pkt_len + NET_IP_ALIGN);
-			if (skb == NULL) {
-				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-				       dev->name);
-				dev->stats.rx_dropped++;
-				break;
-			}
-			skb_reserve(skb, NET_IP_ALIGN);
-
-			data = skb_put(skb, pkt_len);
-
-			/* copy from receive buffer */
-			cur_bd = 0;
-			offset = 0;
-			while (offset < pkt_len && cur_bd < bd_count) {
-				int len = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BDCtl) &
-					BD_BuffLength_MASK;
-				dma_addr_t dma = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BuffData);
-				void *rxbuf = rxbuf_bus_to_virt(lp, dma);
-				if (offset + len > pkt_len)
-					len = pkt_len - offset;
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-				pci_dma_sync_single_for_cpu(lp->pci_dev,
-							    dma, len,
-							    PCI_DMA_FROMDEVICE);
-#endif
-				memcpy(data + offset, rxbuf, len);
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-				pci_dma_sync_single_for_device(lp->pci_dev,
-							       dma, len,
-							       PCI_DMA_FROMDEVICE);
-#endif
-				offset += len;
-				cur_bd++;
-			}
-#else /* TC35815_USE_PACKEDBUFFER */
 			BUG_ON(bd_count > 1);
 			cur_bd = (le32_to_cpu(lp->rfd_cur->bd[0].BDCtl)
 				  & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT;
@@ -1757,16 +1537,11 @@
 				memmove(skb->data, skb->data - NET_IP_ALIGN,
 					pkt_len);
 			data = skb_put(skb, pkt_len);
-#endif /* TC35815_USE_PACKEDBUFFER */
 			if (netif_msg_pktdata(lp))
 				print_eth(data);
 			skb->protocol = eth_type_trans(skb, dev);
-#ifdef TC35815_NAPI
 			netif_receive_skb(skb);
 			received++;
-#else
-			netif_rx(skb);
-#endif
 			dev->stats.rx_packets++;
 			dev->stats.rx_bytes += pkt_len;
 		} else {
@@ -1803,19 +1578,11 @@
 			BUG_ON(id >= RX_BUF_NUM);
 #endif
 			/* free old buffers */
-#ifdef TC35815_USE_PACKEDBUFFER
-			while (lp->fbl_curid != id)
-#else
 			lp->fbl_count--;
 			while (lp->fbl_count < RX_BUF_NUM)
-#endif
 			{
-#ifdef TC35815_USE_PACKEDBUFFER
-				unsigned char curid = lp->fbl_curid;
-#else
 				unsigned char curid =
 					(id + 1 + lp->fbl_count) % RX_BUF_NUM;
-#endif
 				struct BDesc *bd = &lp->fbl_ptr->bd[curid];
 #ifdef DEBUG
 				bdctl = le32_to_cpu(bd->BDCtl);
@@ -1826,7 +1593,6 @@
 				}
 #endif
 				/* pass BD to controller */
-#ifndef TC35815_USE_PACKEDBUFFER
 				if (!lp->rx_skbs[curid].skb) {
 					lp->rx_skbs[curid].skb =
 						alloc_rxbuf_skb(dev,
@@ -1836,21 +1602,11 @@
 						break; /* try on next reception */
 					bd->BuffData = cpu_to_le32(lp->rx_skbs[curid].skb_dma);
 				}
-#endif /* TC35815_USE_PACKEDBUFFER */
 				/* Note: BDLength was modified by chip. */
 				bd->BDCtl = cpu_to_le32(BD_CownsBD |
 							(curid << BD_RxBDID_SHIFT) |
 							RX_BUF_SIZE);
-#ifdef TC35815_USE_PACKEDBUFFER
-				lp->fbl_curid = (curid + 1) % RX_BUF_NUM;
-				if (netif_msg_rx_status(lp)) {
-					printk("%s: Entering new FBD %d\n",
-					       dev->name, lp->fbl_curid);
-					dump_frfd(lp->fbl_ptr);
-				}
-#else
 				lp->fbl_count++;
-#endif
 			}
 		}
 
@@ -1882,12 +1638,9 @@
 #endif
 	}
 
-#ifdef TC35815_NAPI
 	return received;
-#endif
 }
 
-#ifdef TC35815_NAPI
 static int tc35815_poll(struct napi_struct *napi, int budget)
 {
 	struct tc35815_local *lp = container_of(napi, struct tc35815_local, napi);
@@ -1924,13 +1677,8 @@
 	}
 	return received;
 }
-#endif
 
-#ifdef NO_CHECK_CARRIER
-#define TX_STA_ERR	(Tx_ExColl|Tx_Under|Tx_Defer|Tx_LateColl|Tx_TxPar|Tx_SQErr)
-#else
 #define TX_STA_ERR	(Tx_ExColl|Tx_Under|Tx_Defer|Tx_NCarr|Tx_LateColl|Tx_TxPar|Tx_SQErr)
-#endif
 
 static void
 tc35815_check_tx_stat(struct net_device *dev, int status)
@@ -1944,16 +1692,12 @@
 	if (status & Tx_TxColl_MASK)
 		dev->stats.collisions += status & Tx_TxColl_MASK;
 
-#ifndef NO_CHECK_CARRIER
 	/* TX4939 does not have NCarr */
 	if (lp->chiptype == TC35815_TX4939)
 		status &= ~Tx_NCarr;
-#ifdef WORKAROUND_LOSTCAR
 	/* WORKAROUND: ignore LostCrS in full duplex operation */
 	if (!lp->link || lp->duplex == DUPLEX_FULL)
 		status &= ~Tx_NCarr;
-#endif
-#endif
 
 	if (!(status & TX_STA_ERR)) {
 		/* no error. */
@@ -1983,12 +1727,10 @@
 		dev->stats.tx_fifo_errors++;
 		msg = "Excessive Deferral.";
 	}
-#ifndef NO_CHECK_CARRIER
 	if (status & Tx_NCarr) {
 		dev->stats.tx_carrier_errors++;
 		msg = "Lost Carrier Sense.";
 	}
-#endif
 	if (status & Tx_LateColl) {
 		dev->stats.tx_aborted_errors++;
 		msg = "Late Collision.";
@@ -2044,11 +1786,7 @@
 			pci_unmap_single(lp->pci_dev, lp->tx_skbs[lp->tfd_end].skb_dma, skb->len, PCI_DMA_TODEVICE);
 			lp->tx_skbs[lp->tfd_end].skb = NULL;
 			lp->tx_skbs[lp->tfd_end].skb_dma = 0;
-#ifdef TC35815_NAPI
 			dev_kfree_skb_any(skb);
-#else
-			dev_kfree_skb_irq(skb);
-#endif
 		}
 		txfd->fd.FDSystem = cpu_to_le32(0xffffffff);
 
@@ -2083,9 +1821,7 @@
 
 				/* start DMA Transmitter again */
 				txhead->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
-#ifdef GATHER_TXINT
 				txhead->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
-#endif
 				if (netif_msg_tx_queued(lp)) {
 					printk("%s: start TxFD on queue.\n",
 					       dev->name);
@@ -2112,9 +1848,7 @@
 	struct tc35815_local *lp = netdev_priv(dev);
 
 	netif_stop_queue(dev);
-#ifdef TC35815_NAPI
 	napi_disable(&lp->napi);
-#endif
 	if (lp->phy_dev)
 		phy_stop(lp->phy_dev);
 	cancel_work_sync(&lp->restart_work);
@@ -2198,14 +1932,12 @@
 		(struct tc35815_regs __iomem *)dev->base_addr;
 
 	if (dev->flags & IFF_PROMISC) {
-#ifdef WORKAROUND_100HALF_PROMISC
 		/* With some (all?) 100MHalf HUB, controller will hang
 		 * if we enabled promiscuous mode before linkup... */
 		struct tc35815_local *lp = netdev_priv(dev);
 
 		if (!lp->link)
 			return;
-#endif
 		/* Enable promiscuous mode */
 		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
 	} else if ((dev->flags & IFF_ALLMULTI) ||
@@ -2392,9 +2124,6 @@
 		tc_writel(DMA_BURST_SIZE | DMA_RxAlign_2, &tr->DMA_Ctl);
 	else
 		tc_writel(DMA_BURST_SIZE, &tr->DMA_Ctl);
-#ifdef TC35815_USE_PACKEDBUFFER
-	tc_writel(RxFrag_EnPack | ETH_ZLEN, &tr->RxFragSize);	/* Packing */
-#endif
 	tc_writel(0, &tr->TxPollCtr);	/* Batch mode */
 	tc_writel(TX_THRESHOLD, &tr->TxThrsh);
 	tc_writel(INT_EN_CMD, &tr->Int_En);
@@ -2412,19 +2141,12 @@
 	tc_writel(RX_CTL_CMD, &tr->Rx_Ctl);	/* start MAC receiver */
 
 	/* start MAC transmitter */
-#ifndef NO_CHECK_CARRIER
 	/* TX4939 does not have EnLCarr */
 	if (lp->chiptype == TC35815_TX4939)
 		txctl &= ~Tx_EnLCarr;
-#ifdef WORKAROUND_LOSTCAR
 	/* WORKAROUND: ignore LostCrS in full duplex operation */
 	if (!lp->phy_dev || !lp->link || lp->duplex == DUPLEX_FULL)
 		txctl &= ~Tx_EnLCarr;
-#endif
-#endif /* !NO_CHECK_CARRIER */
-#ifdef GATHER_TXINT
-	txctl &= ~Tx_EnComp;	/* disable global tx completion int. */
-#endif
 	tc_writel(txctl, &tr->Tx_Ctl);
 }
 
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index ec9dfb2..80b404f 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -420,7 +420,7 @@
 		  GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB);
 
 #define BDX_IRQ_TYPE	((priv->nic->irq_type == IRQ_MSI)?0:IRQF_SHARED)
-	if ((rc = request_irq(priv->pdev->irq, &bdx_isr_napi, BDX_IRQ_TYPE,
+	if ((rc = request_irq(priv->pdev->irq, bdx_isr_napi, BDX_IRQ_TYPE,
 			 ndev->name, ndev)))
 		goto err_irq;
 	bdx_enable_interrupts(priv);
@@ -1784,9 +1784,9 @@
 	}
 #endif
 
-	if (unlikely(netif_queue_stopped(priv->ndev)
-		     && netif_carrier_ok(priv->ndev)
-		     && (priv->tx_level >= BDX_MIN_TX_LEVEL))) {
+	if (unlikely(netif_queue_stopped(priv->ndev) &&
+		     netif_carrier_ok(priv->ndev) &&
+		     (priv->tx_level >= BDX_MIN_TX_LEVEL))) {
 		DBG("%s: %s: TX Q WAKE level %d\n",
 		    BDX_DRV_NAME, priv->ndev->name, priv->tx_level);
 		netif_wake_queue(priv->ndev);
@@ -1878,7 +1878,7 @@
 			udelay(50);	/* give hw a chance to clean fifo */
 			continue;
 		}
-		avail = MIN(avail, size);
+		avail = min(avail, size);
 		DBG("about to push  %d bytes starting %p size %d\n", avail,
 		    data, size);
 		bdx_tx_push_desc(priv, data, avail);
@@ -2105,12 +2105,6 @@
 }
 
 /****************** Ethtool interface *********************/
-/* get strings for tests */
-static const char
- bdx_test_names[][ETH_GSTRING_LEN] = {
-	"No tests defined"
-};
-
 /* get strings for statistics counters */
 static const char
  bdx_stat_names[][ETH_GSTRING_LEN] = {
@@ -2279,8 +2273,8 @@
 	    (((tx_max_coal * BDX_TXF_DESC_SZ) + PCK_TH_MULT - 1)
 	     / PCK_TH_MULT);
 
-	if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF)
-	    || (rx_max_coal > 0xF) || (tx_max_coal > 0xF))
+	if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF) ||
+	    (rx_max_coal > 0xF) || (tx_max_coal > 0xF))
 		return -EINVAL;
 
 	rdintcm = INT_REG_VAL(rx_coal, GET_INT_COAL_RC(priv->rdintcm),
@@ -2353,8 +2347,8 @@
 		tx_size = 3;
 
 	/*Is there anything to do? */
-	if ((rx_size == priv->rxf_size)
-	    && (tx_size == priv->txd_size))
+	if ((rx_size == priv->rxf_size) &&
+	    (tx_size == priv->txd_size))
 		return 0;
 
 	priv->rxf_size = rx_size;
@@ -2380,9 +2374,6 @@
 static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
 {
 	switch (stringset) {
-	case ETH_SS_TEST:
-		memcpy(data, *bdx_test_names, sizeof(bdx_test_names));
-		break;
 	case ETH_SS_STATS:
 		memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names));
 		break;
@@ -2390,15 +2381,21 @@
 }
 
 /*
- * bdx_get_stats_count - return number of 64bit statistics counters
+ * bdx_get_sset_count - return number of statistics or tests
  * @netdev
  */
-static int bdx_get_stats_count(struct net_device *netdev)
+static int bdx_get_sset_count(struct net_device *netdev, int stringset)
 {
 	struct bdx_priv *priv = netdev_priv(netdev);
-	BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
-		   != sizeof(struct bdx_stats) / sizeof(u64));
-	return ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)	: 0);
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
+			   != sizeof(struct bdx_stats) / sizeof(u64));
+		return ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)	: 0);
+	default:
+		return -EINVAL;
+	}
 }
 
 /*
@@ -2441,7 +2438,7 @@
 		.get_sg = ethtool_op_get_sg,
 		.get_tso = ethtool_op_get_tso,
 		.get_strings = bdx_get_strings,
-		.get_stats_count = bdx_get_stats_count,
+		.get_sset_count = bdx_get_sset_count,
 		.get_ethtool_stats = bdx_get_ethtool_stats,
 	};
 
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index 4fc875e..1241419 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -76,8 +76,6 @@
 #define FIFO_SIZE  4096
 #define FIFO_EXTRA_SPACE            1024
 
-#define MIN(x, y)  ((x) < (y) ? (x) : (y))
-
 #if BITS_PER_LONG == 64
 #    define H32_64(x)  (u32) ((u64)(x) >> 32)
 #    define L32_64(x)  (u32) ((u64)(x) & 0xffffffff)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ba5d3fe..3a74d21 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.102"
-#define DRV_MODULE_RELDATE	"September 1, 2009"
+#define DRV_MODULE_VERSION	"3.105"
+#define DRV_MODULE_RELDATE	"December 2, 2009"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -137,6 +137,12 @@
 #define TG3_RX_STD_MAP_SZ		TG3_RX_DMA_TO_MAP_SZ(TG3_RX_STD_DMA_SZ)
 #define TG3_RX_JMB_MAP_SZ		TG3_RX_DMA_TO_MAP_SZ(TG3_RX_JMB_DMA_SZ)
 
+#define TG3_RX_STD_BUFF_RING_SIZE \
+	(sizeof(struct ring_info) * TG3_RX_RING_SIZE)
+
+#define TG3_RX_JMB_BUFF_RING_SIZE \
+	(sizeof(struct ring_info) * TG3_RX_JUMBO_RING_SIZE)
+
 /* minimum number of free TX descriptors required to wake up TX process */
 #define TG3_TX_WAKEUP_THRESH(tnapi)		((tnapi)->tx_pending / 4)
 
@@ -235,6 +241,9 @@
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57760)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57790)},
 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57788)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5717)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5718)},
+	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5724)},
 	{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
 	{PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
 	{PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
@@ -396,7 +405,7 @@
 				       TG3_64BIT_REG_LOW, val);
 		return;
 	}
-	if (off == (MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW)) {
+	if (off == TG3_RX_STD_PROD_IDX_REG) {
 		pci_write_config_dword(tp->pdev, TG3PCI_STD_RING_PROD_IDX +
 				       TG3_64BIT_REG_LOW, val);
 		return;
@@ -937,9 +946,10 @@
 	u32 val;
 	struct phy_device *phydev;
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 	switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
 	case TG3_PHY_ID_BCM50610:
+	case TG3_PHY_ID_BCM50610M:
 		val = MAC_PHYCFG2_50610_LED_MODES;
 		break;
 	case TG3_PHY_ID_BCMAC131:
@@ -1031,7 +1041,7 @@
 		if (is_serdes)
 			tp->phy_addr += 7;
 	} else
-		tp->phy_addr = PHY_ADDR;
+		tp->phy_addr = TG3_PHY_MII_ADDR;
 
 	if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
@@ -1062,7 +1072,7 @@
 	tp->mdio_bus->read     = &tg3_mdio_read;
 	tp->mdio_bus->write    = &tg3_mdio_write;
 	tp->mdio_bus->reset    = &tg3_mdio_reset;
-	tp->mdio_bus->phy_mask = ~(1 << PHY_ADDR);
+	tp->mdio_bus->phy_mask = ~(1 << TG3_PHY_MII_ADDR);
 	tp->mdio_bus->irq      = &tp->mdio_irq[0];
 
 	for (i = 0; i < PHY_MAX_ADDR; i++)
@@ -1084,7 +1094,7 @@
 		return i;
 	}
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	if (!phydev || !phydev->drv) {
 		printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
@@ -1096,8 +1106,14 @@
 	switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
 	case TG3_PHY_ID_BCM57780:
 		phydev->interface = PHY_INTERFACE_MODE_GMII;
+		phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		break;
 	case TG3_PHY_ID_BCM50610:
+	case TG3_PHY_ID_BCM50610M:
+		phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
+				     PHY_BRCM_RX_REFCLK_UNUSED |
+				     PHY_BRCM_DIS_TXCRXC_NOENRGY |
+				     PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
 			phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
@@ -1111,6 +1127,7 @@
 	case TG3_PHY_ID_RTL8201E:
 	case TG3_PHY_ID_BCMAC131:
 		phydev->interface = PHY_INTERFACE_MODE_MII;
+		phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
 		break;
 	}
@@ -1311,7 +1328,7 @@
 	u32 old_tx_mode = tp->tx_mode;
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
-		autoneg = tp->mdio_bus->phy_map[PHY_ADDR]->autoneg;
+		autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
 	else
 		autoneg = tp->link_config.autoneg;
 
@@ -1348,7 +1365,7 @@
 	u8 oldflowctrl, linkmesg = 0;
 	u32 mac_mode, lcl_adv, rmt_adv;
 	struct tg3 *tp = netdev_priv(dev);
-	struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	struct phy_device *phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	spin_lock_bh(&tp->lock);
 
@@ -1363,8 +1380,11 @@
 
 		if (phydev->speed == SPEED_100 || phydev->speed == SPEED_10)
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
-		else
+		else if (phydev->speed == SPEED_1000 ||
+			 GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785)
 			mac_mode |= MAC_MODE_PORT_MODE_GMII;
+		else
+			mac_mode |= MAC_MODE_PORT_MODE_MII;
 
 		if (phydev->duplex == DUPLEX_HALF)
 			mac_mode |= MAC_MODE_HALF_DUPLEX;
@@ -1434,7 +1454,7 @@
 	/* Bring the PHY back to a known state. */
 	tg3_bmcr_reset(tp);
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	/* Attach the MAC to the PHY. */
 	phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
@@ -1461,7 +1481,7 @@
 				      SUPPORTED_Asym_Pause);
 		break;
 	default:
-		phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
+		phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 		return -EINVAL;
 	}
 
@@ -1479,7 +1499,7 @@
 	if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 		return;
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	if (tp->link_config.phy_is_low_power) {
 		tp->link_config.phy_is_low_power = 0;
@@ -1499,13 +1519,13 @@
 	if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 		return;
 
-	phy_stop(tp->mdio_bus->phy_map[PHY_ADDR]);
+	phy_stop(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 }
 
 static void tg3_phy_fini(struct tg3 *tp)
 {
 	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
-		phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
+		phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 		tp->tg3_flags3 &= ~TG3_FLG3_PHY_CONNECTED;
 	}
 }
@@ -2149,6 +2169,26 @@
 		tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
 		udelay(40);
 		return;
+	} else if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+		u32 phytest;
+		if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
+			u32 phy;
+
+			tg3_writephy(tp, MII_ADVERTISE, 0);
+			tg3_writephy(tp, MII_BMCR,
+				     BMCR_ANENABLE | BMCR_ANRESTART);
+
+			tg3_writephy(tp, MII_TG3_FET_TEST,
+				     phytest | MII_TG3_FET_SHADOW_EN);
+			if (!tg3_readphy(tp, MII_TG3_FET_SHDW_AUXMODE4, &phy)) {
+				phy |= MII_TG3_FET_SHDW_AUXMODE4_SBPD;
+				tg3_writephy(tp,
+					     MII_TG3_FET_SHDW_AUXMODE4,
+					     phy);
+			}
+			tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
+		}
+		return;
 	} else if (do_low_power) {
 		tg3_writephy(tp, MII_TG3_EXT_CTRL,
 			     MII_TG3_EXT_CTRL_FORCE_LED_OFF);
@@ -2218,7 +2258,7 @@
 static void tg3_enable_nvram_access(struct tg3 *tp)
 {
 	if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_PROTECTED_NVRAM)) {
+	    !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM)) {
 		u32 nvaccess = tr32(NVRAM_ACCESS);
 
 		tw32(NVRAM_ACCESS, nvaccess | ACCESS_ENABLE);
@@ -2229,7 +2269,7 @@
 static void tg3_disable_nvram_access(struct tg3 *tp)
 {
 	if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-	    !(tp->tg3_flags2 & TG3_FLG2_PROTECTED_NVRAM)) {
+	    !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM)) {
 		u32 nvaccess = tr32(NVRAM_ACCESS);
 
 		tw32(NVRAM_ACCESS, nvaccess & ~ACCESS_ENABLE);
@@ -2474,7 +2514,7 @@
 			struct phy_device *phydev;
 			u32 phyid, advertising;
 
-			phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+			phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 			tp->link_config.phy_is_low_power = 1;
 
@@ -3243,15 +3283,6 @@
 			pci_write_config_word(tp->pdev,
 					      tp->pcie_cap + PCI_EXP_LNKCTL,
 					      newlnkctl);
-	} else if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
-		u32 newreg, oldreg = tr32(TG3_PCIE_LNKCTL);
-		if (tp->link_config.active_speed == SPEED_100 ||
-		    tp->link_config.active_speed == SPEED_10)
-			newreg = oldreg & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
-		else
-			newreg = oldreg | TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
-		if (newreg != oldreg)
-			tw32(TG3_PCIE_LNKCTL, newreg);
 	}
 
 	if (current_link_up != netif_carrier_ok(tp->dev)) {
@@ -4320,13 +4351,13 @@
 	struct netdev_queue *txq;
 	int index = tnapi - tp->napi;
 
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
 		index--;
 
 	txq = netdev_get_tx_queue(tp->dev, index);
 
 	while (sw_idx != hw_idx) {
-		struct tx_ring_info *ri = &tnapi->tx_buffers[sw_idx];
+		struct ring_info *ri = &tnapi->tx_buffers[sw_idx];
 		struct sk_buff *skb = ri->skb;
 		int i, tx_bug = 0;
 
@@ -4335,7 +4366,10 @@
 			return;
 		}
 
-		skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
+		pci_unmap_single(tp->pdev,
+				 pci_unmap_addr(ri, mapping),
+				 skb_headlen(skb),
+				 PCI_DMA_TODEVICE);
 
 		ri->skb = NULL;
 
@@ -4345,6 +4379,11 @@
 			ri = &tnapi->tx_buffers[sw_idx];
 			if (unlikely(ri->skb != NULL || sw_idx == hw_idx))
 				tx_bug = 1;
+
+			pci_unmap_page(tp->pdev,
+				       pci_unmap_addr(ri, mapping),
+				       skb_shinfo(skb)->frags[i].size,
+				       PCI_DMA_TODEVICE);
 			sw_idx = NEXT_TX(sw_idx);
 		}
 
@@ -4375,6 +4414,17 @@
 	}
 }
 
+static void tg3_rx_skb_free(struct tg3 *tp, struct ring_info *ri, u32 map_sz)
+{
+	if (!ri->skb)
+		return;
+
+	pci_unmap_single(tp->pdev, pci_unmap_addr(ri, mapping),
+			 map_sz, PCI_DMA_FROMDEVICE);
+	dev_kfree_skb_any(ri->skb);
+	ri->skb = NULL;
+}
+
 /* Returns size of skb allocated or < 0 on error.
  *
  * We only need to fill in the address because the other members
@@ -4386,16 +4436,14 @@
  * buffers the cpu only reads the last cacheline of the RX descriptor
  * (to fetch the error flags, vlan tag, checksum, and opaque cookie).
  */
-static int tg3_alloc_rx_skb(struct tg3_napi *tnapi, u32 opaque_key,
-			    int src_idx, u32 dest_idx_unmasked)
+static int tg3_alloc_rx_skb(struct tg3 *tp, struct tg3_rx_prodring_set *tpr,
+			    u32 opaque_key, u32 dest_idx_unmasked)
 {
-	struct tg3 *tp = tnapi->tp;
 	struct tg3_rx_buffer_desc *desc;
 	struct ring_info *map, *src_map;
 	struct sk_buff *skb;
 	dma_addr_t mapping;
 	int skb_size, dest_idx;
-	struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
 
 	src_map = NULL;
 	switch (opaque_key) {
@@ -4403,8 +4451,6 @@
 		dest_idx = dest_idx_unmasked % TG3_RX_RING_SIZE;
 		desc = &tpr->rx_std[dest_idx];
 		map = &tpr->rx_std_buffers[dest_idx];
-		if (src_idx >= 0)
-			src_map = &tpr->rx_std_buffers[src_idx];
 		skb_size = tp->rx_pkt_map_sz;
 		break;
 
@@ -4412,8 +4458,6 @@
 		dest_idx = dest_idx_unmasked % TG3_RX_JUMBO_RING_SIZE;
 		desc = &tpr->rx_jmb[dest_idx].std;
 		map = &tpr->rx_jmb_buffers[dest_idx];
-		if (src_idx >= 0)
-			src_map = &tpr->rx_jmb_buffers[src_idx];
 		skb_size = TG3_RX_JMB_MAP_SZ;
 		break;
 
@@ -4435,13 +4479,14 @@
 
 	mapping = pci_map_single(tp->pdev, skb->data, skb_size,
 				 PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(tp->pdev, mapping)) {
+		dev_kfree_skb(skb);
+		return -EIO;
+	}
 
 	map->skb = skb;
 	pci_unmap_addr_set(map, mapping, mapping);
 
-	if (src_map != NULL)
-		src_map->skb = NULL;
-
 	desc->addr_hi = ((u64)mapping >> 32);
 	desc->addr_lo = ((u64)mapping & 0xffffffff);
 
@@ -4452,30 +4497,32 @@
  * members of the RX descriptor are invariant.  See notes above
  * tg3_alloc_rx_skb for full details.
  */
-static void tg3_recycle_rx(struct tg3_napi *tnapi, u32 opaque_key,
-			   int src_idx, u32 dest_idx_unmasked)
+static void tg3_recycle_rx(struct tg3_napi *tnapi,
+			   struct tg3_rx_prodring_set *dpr,
+			   u32 opaque_key, int src_idx,
+			   u32 dest_idx_unmasked)
 {
 	struct tg3 *tp = tnapi->tp;
 	struct tg3_rx_buffer_desc *src_desc, *dest_desc;
 	struct ring_info *src_map, *dest_map;
 	int dest_idx;
-	struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
+	struct tg3_rx_prodring_set *spr = &tp->prodring[0];
 
 	switch (opaque_key) {
 	case RXD_OPAQUE_RING_STD:
 		dest_idx = dest_idx_unmasked % TG3_RX_RING_SIZE;
-		dest_desc = &tpr->rx_std[dest_idx];
-		dest_map = &tpr->rx_std_buffers[dest_idx];
-		src_desc = &tpr->rx_std[src_idx];
-		src_map = &tpr->rx_std_buffers[src_idx];
+		dest_desc = &dpr->rx_std[dest_idx];
+		dest_map = &dpr->rx_std_buffers[dest_idx];
+		src_desc = &spr->rx_std[src_idx];
+		src_map = &spr->rx_std_buffers[src_idx];
 		break;
 
 	case RXD_OPAQUE_RING_JUMBO:
 		dest_idx = dest_idx_unmasked % TG3_RX_JUMBO_RING_SIZE;
-		dest_desc = &tpr->rx_jmb[dest_idx].std;
-		dest_map = &tpr->rx_jmb_buffers[dest_idx];
-		src_desc = &tpr->rx_jmb[src_idx].std;
-		src_map = &tpr->rx_jmb_buffers[src_idx];
+		dest_desc = &dpr->rx_jmb[dest_idx].std;
+		dest_map = &dpr->rx_jmb_buffers[dest_idx];
+		src_desc = &spr->rx_jmb[src_idx].std;
+		src_map = &spr->rx_jmb_buffers[src_idx];
 		break;
 
 	default:
@@ -4487,7 +4534,6 @@
 			   pci_unmap_addr(src_map, mapping));
 	dest_desc->addr_hi = src_desc->addr_hi;
 	dest_desc->addr_lo = src_desc->addr_lo;
-
 	src_map->skb = NULL;
 }
 
@@ -4519,10 +4565,11 @@
 {
 	struct tg3 *tp = tnapi->tp;
 	u32 work_mask, rx_std_posted = 0;
+	u32 std_prod_idx, jmb_prod_idx;
 	u32 sw_idx = tnapi->rx_rcb_ptr;
 	u16 hw_idx;
 	int received;
-	struct tg3_rx_prodring_set *tpr = &tp->prodring[0];
+	struct tg3_rx_prodring_set *tpr = tnapi->prodring;
 
 	hw_idx = *(tnapi->rx_rcb_prod_idx);
 	/*
@@ -4532,7 +4579,10 @@
 	rmb();
 	work_mask = 0;
 	received = 0;
+	std_prod_idx = tpr->rx_std_prod_idx;
+	jmb_prod_idx = tpr->rx_jmb_prod_idx;
 	while (sw_idx != hw_idx && budget > 0) {
+		struct ring_info *ri;
 		struct tg3_rx_buffer_desc *desc = &tnapi->rx_rcb[sw_idx];
 		unsigned int len;
 		struct sk_buff *skb;
@@ -4542,16 +4592,16 @@
 		desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK;
 		opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK;
 		if (opaque_key == RXD_OPAQUE_RING_STD) {
-			struct ring_info *ri = &tpr->rx_std_buffers[desc_idx];
+			ri = &tp->prodring[0].rx_std_buffers[desc_idx];
 			dma_addr = pci_unmap_addr(ri, mapping);
 			skb = ri->skb;
-			post_ptr = &tpr->rx_std_ptr;
+			post_ptr = &std_prod_idx;
 			rx_std_posted++;
 		} else if (opaque_key == RXD_OPAQUE_RING_JUMBO) {
-			struct ring_info *ri = &tpr->rx_jmb_buffers[desc_idx];
+			ri = &tp->prodring[0].rx_jmb_buffers[desc_idx];
 			dma_addr = pci_unmap_addr(ri, mapping);
 			skb = ri->skb;
-			post_ptr = &tpr->rx_jmb_ptr;
+			post_ptr = &jmb_prod_idx;
 		} else
 			goto next_pkt_nopost;
 
@@ -4560,7 +4610,7 @@
 		if ((desc->err_vlan & RXD_ERR_MASK) != 0 &&
 		    (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) {
 		drop_it:
-			tg3_recycle_rx(tnapi, opaque_key,
+			tg3_recycle_rx(tnapi, tpr, opaque_key,
 				       desc_idx, *post_ptr);
 		drop_it_no_recycle:
 			/* Other statistics kept track of by card. */
@@ -4571,20 +4621,21 @@
 		len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) -
 		      ETH_FCS_LEN;
 
-		if (len > RX_COPY_THRESHOLD
-			&& tp->rx_offset == NET_IP_ALIGN
-			/* rx_offset will likely not equal NET_IP_ALIGN
-			 * if this is a 5701 card running in PCI-X mode
-			 * [see tg3_get_invariants()]
-			 */
-		) {
+		if (len > RX_COPY_THRESHOLD &&
+		    tp->rx_offset == NET_IP_ALIGN) {
+		    /* rx_offset will likely not equal NET_IP_ALIGN
+		     * if this is a 5701 card running in PCI-X mode
+		     * [see tg3_get_invariants()]
+		     */
 			int skb_size;
 
-			skb_size = tg3_alloc_rx_skb(tnapi, opaque_key,
-						    desc_idx, *post_ptr);
+			skb_size = tg3_alloc_rx_skb(tp, tpr, opaque_key,
+						    *post_ptr);
 			if (skb_size < 0)
 				goto drop_it;
 
+			ri->skb = NULL;
+
 			pci_unmap_single(tp->pdev, dma_addr, skb_size,
 					 PCI_DMA_FROMDEVICE);
 
@@ -4592,7 +4643,7 @@
 		} else {
 			struct sk_buff *copy_skb;
 
-			tg3_recycle_rx(tnapi, opaque_key,
+			tg3_recycle_rx(tnapi, tpr, opaque_key,
 				       desc_idx, *post_ptr);
 
 			copy_skb = netdev_alloc_skb(tp->dev,
@@ -4643,9 +4694,7 @@
 
 		if (unlikely(rx_std_posted >= tp->rx_std_max_post)) {
 			u32 idx = *post_ptr % TG3_RX_RING_SIZE;
-
-			tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX +
-				     TG3_64BIT_REG_LOW, idx);
+			tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, idx);
 			work_mask &= ~RXD_OPAQUE_RING_STD;
 			rx_std_posted = 0;
 		}
@@ -4665,33 +4714,45 @@
 	tw32_rx_mbox(tnapi->consmbox, sw_idx);
 
 	/* Refill RX ring(s). */
-	if (work_mask & RXD_OPAQUE_RING_STD) {
-		sw_idx = tpr->rx_std_ptr % TG3_RX_RING_SIZE;
-		tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
-			     sw_idx);
+	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) || tnapi == &tp->napi[1]) {
+		if (work_mask & RXD_OPAQUE_RING_STD) {
+			tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
+			tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG,
+				     tpr->rx_std_prod_idx);
+		}
+		if (work_mask & RXD_OPAQUE_RING_JUMBO) {
+			tpr->rx_jmb_prod_idx = jmb_prod_idx %
+					       TG3_RX_JUMBO_RING_SIZE;
+			tw32_rx_mbox(TG3_RX_JMB_PROD_IDX_REG,
+				     tpr->rx_jmb_prod_idx);
+		}
+		mmiowb();
+	} else if (work_mask) {
+		/* rx_std_buffers[] and rx_jmb_buffers[] entries must be
+		 * updated before the producer indices can be updated.
+		 */
+		smp_wmb();
+
+		tpr->rx_std_prod_idx = std_prod_idx % TG3_RX_RING_SIZE;
+		tpr->rx_jmb_prod_idx = jmb_prod_idx % TG3_RX_JUMBO_RING_SIZE;
+
+		napi_schedule(&tp->napi[1].napi);
 	}
-	if (work_mask & RXD_OPAQUE_RING_JUMBO) {
-		sw_idx = tpr->rx_jmb_ptr % TG3_RX_JUMBO_RING_SIZE;
-		tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
-			     sw_idx);
-	}
-	mmiowb();
 
 	return received;
 }
 
-static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
+static void tg3_poll_link(struct tg3 *tp)
 {
-	struct tg3 *tp = tnapi->tp;
-	struct tg3_hw_status *sblk = tnapi->hw_status;
-
 	/* handle link change and other phy events */
 	if (!(tp->tg3_flags &
 	      (TG3_FLAG_USE_LINKCHG_REG |
 	       TG3_FLAG_POLL_SERDES))) {
+		struct tg3_hw_status *sblk = tp->napi[0].hw_status;
+
 		if (sblk->status & SD_STATUS_LINK_CHG) {
 			sblk->status = SD_STATUS_UPDATED |
-				(sblk->status & ~SD_STATUS_LINK_CHG);
+				       (sblk->status & ~SD_STATUS_LINK_CHG);
 			spin_lock(&tp->lock);
 			if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
 				tw32_f(MAC_STATUS,
@@ -4705,6 +4766,98 @@
 			spin_unlock(&tp->lock);
 		}
 	}
+}
+
+static void tg3_rx_prodring_xfer(struct tg3 *tp,
+				 struct tg3_rx_prodring_set *dpr,
+				 struct tg3_rx_prodring_set *spr)
+{
+	u32 si, di, cpycnt, src_prod_idx;
+	int i;
+
+	while (1) {
+		src_prod_idx = spr->rx_std_prod_idx;
+
+		/* Make sure updates to the rx_std_buffers[] entries and the
+		 * standard producer index are seen in the correct order.
+		 */
+		smp_rmb();
+
+		if (spr->rx_std_cons_idx == src_prod_idx)
+			break;
+
+		if (spr->rx_std_cons_idx < src_prod_idx)
+			cpycnt = src_prod_idx - spr->rx_std_cons_idx;
+		else
+			cpycnt = TG3_RX_RING_SIZE - spr->rx_std_cons_idx;
+
+		cpycnt = min(cpycnt, TG3_RX_RING_SIZE - dpr->rx_std_prod_idx);
+
+		si = spr->rx_std_cons_idx;
+		di = dpr->rx_std_prod_idx;
+
+		memcpy(&dpr->rx_std_buffers[di],
+		       &spr->rx_std_buffers[si],
+		       cpycnt * sizeof(struct ring_info));
+
+		for (i = 0; i < cpycnt; i++, di++, si++) {
+			struct tg3_rx_buffer_desc *sbd, *dbd;
+			sbd = &spr->rx_std[si];
+			dbd = &dpr->rx_std[di];
+			dbd->addr_hi = sbd->addr_hi;
+			dbd->addr_lo = sbd->addr_lo;
+		}
+
+		spr->rx_std_cons_idx = (spr->rx_std_cons_idx + cpycnt) %
+				       TG3_RX_RING_SIZE;
+		dpr->rx_std_prod_idx = (dpr->rx_std_prod_idx + cpycnt) %
+				       TG3_RX_RING_SIZE;
+	}
+
+	while (1) {
+		src_prod_idx = spr->rx_jmb_prod_idx;
+
+		/* Make sure updates to the rx_jmb_buffers[] entries and
+		 * the jumbo producer index are seen in the correct order.
+		 */
+		smp_rmb();
+
+		if (spr->rx_jmb_cons_idx == src_prod_idx)
+			break;
+
+		if (spr->rx_jmb_cons_idx < src_prod_idx)
+			cpycnt = src_prod_idx - spr->rx_jmb_cons_idx;
+		else
+			cpycnt = TG3_RX_JUMBO_RING_SIZE - spr->rx_jmb_cons_idx;
+
+		cpycnt = min(cpycnt,
+			     TG3_RX_JUMBO_RING_SIZE - dpr->rx_jmb_prod_idx);
+
+		si = spr->rx_jmb_cons_idx;
+		di = dpr->rx_jmb_prod_idx;
+
+		memcpy(&dpr->rx_jmb_buffers[di],
+		       &spr->rx_jmb_buffers[si],
+		       cpycnt * sizeof(struct ring_info));
+
+		for (i = 0; i < cpycnt; i++, di++, si++) {
+			struct tg3_rx_buffer_desc *sbd, *dbd;
+			sbd = &spr->rx_jmb[si].std;
+			dbd = &dpr->rx_jmb[di].std;
+			dbd->addr_hi = sbd->addr_hi;
+			dbd->addr_lo = sbd->addr_lo;
+		}
+
+		spr->rx_jmb_cons_idx = (spr->rx_jmb_cons_idx + cpycnt) %
+				       TG3_RX_JUMBO_RING_SIZE;
+		dpr->rx_jmb_prod_idx = (dpr->rx_jmb_prod_idx + cpycnt) %
+				       TG3_RX_JUMBO_RING_SIZE;
+	}
+}
+
+static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget)
+{
+	struct tg3 *tp = tnapi->tp;
 
 	/* run TX completion thread */
 	if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
@@ -4720,6 +4873,74 @@
 	if (*(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr)
 		work_done += tg3_rx(tnapi, budget - work_done);
 
+	if ((tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS) && tnapi == &tp->napi[1]) {
+		int i;
+		u32 std_prod_idx = tp->prodring[0].rx_std_prod_idx;
+		u32 jmb_prod_idx = tp->prodring[0].rx_jmb_prod_idx;
+
+		for (i = 2; i < tp->irq_cnt; i++)
+			tg3_rx_prodring_xfer(tp, tnapi->prodring,
+					     tp->napi[i].prodring);
+
+		wmb();
+
+		if (std_prod_idx != tp->prodring[0].rx_std_prod_idx) {
+			u32 mbox = TG3_RX_STD_PROD_IDX_REG;
+			tw32_rx_mbox(mbox, tp->prodring[0].rx_std_prod_idx);
+		}
+
+		if (jmb_prod_idx != tp->prodring[0].rx_jmb_prod_idx) {
+			u32 mbox = TG3_RX_JMB_PROD_IDX_REG;
+			tw32_rx_mbox(mbox, tp->prodring[0].rx_jmb_prod_idx);
+		}
+
+		mmiowb();
+	}
+
+	return work_done;
+}
+
+static int tg3_poll_msix(struct napi_struct *napi, int budget)
+{
+	struct tg3_napi *tnapi = container_of(napi, struct tg3_napi, napi);
+	struct tg3 *tp = tnapi->tp;
+	int work_done = 0;
+	struct tg3_hw_status *sblk = tnapi->hw_status;
+
+	while (1) {
+		work_done = tg3_poll_work(tnapi, work_done, budget);
+
+		if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
+			goto tx_recovery;
+
+		if (unlikely(work_done >= budget))
+			break;
+
+		/* tp->last_tag is used in tg3_restart_ints() below
+		 * to tell the hw how much work has been processed,
+		 * so we must read it before checking for more work.
+		 */
+		tnapi->last_tag = sblk->status_tag;
+		tnapi->last_irq_tag = tnapi->last_tag;
+		rmb();
+
+		/* check for RX/TX work to do */
+		if (sblk->idx[0].tx_consumer == tnapi->tx_cons &&
+		    *(tnapi->rx_rcb_prod_idx) == tnapi->rx_rcb_ptr) {
+			napi_complete(napi);
+			/* Reenable interrupts. */
+			tw32_mailbox(tnapi->int_mbox, tnapi->last_tag << 24);
+			mmiowb();
+			break;
+		}
+	}
+
+	return work_done;
+
+tx_recovery:
+	/* work_done is guaranteed to be less than budget. */
+	napi_complete(napi);
+	schedule_work(&tp->reset_task);
 	return work_done;
 }
 
@@ -4731,6 +4952,8 @@
 	struct tg3_hw_status *sblk = tnapi->hw_status;
 
 	while (1) {
+		tg3_poll_link(tp);
+
 		work_done = tg3_poll_work(tnapi, work_done, budget);
 
 		if (unlikely(tp->tg3_flags & TG3_FLAG_TX_RECOVERY_PENDING))
@@ -5093,11 +5316,11 @@
 static void tg3_set_txd(struct tg3_napi *, int, dma_addr_t, int, u32, u32);
 
 /* Workaround 4GB and 40-bit hardware DMA bugs. */
-static int tigon3_dma_hwbug_workaround(struct tg3 *tp, struct sk_buff *skb,
-				       u32 last_plus_one, u32 *start,
-				       u32 base_flags, u32 mss)
+static int tigon3_dma_hwbug_workaround(struct tg3_napi *tnapi,
+				       struct sk_buff *skb, u32 last_plus_one,
+				       u32 *start, u32 base_flags, u32 mss)
 {
-	struct tg3_napi *tnapi = &tp->napi[0];
+	struct tg3 *tp = tnapi->tp;
 	struct sk_buff *new_skb;
 	dma_addr_t new_addr = 0;
 	u32 entry = *start;
@@ -5118,16 +5341,21 @@
 	} else {
 		/* New SKB is guaranteed to be linear. */
 		entry = *start;
-		ret = skb_dma_map(&tp->pdev->dev, new_skb, DMA_TO_DEVICE);
-		new_addr = skb_shinfo(new_skb)->dma_head;
+		new_addr = pci_map_single(tp->pdev, new_skb->data, new_skb->len,
+					  PCI_DMA_TODEVICE);
+		/* Make sure the mapping succeeded */
+		if (pci_dma_mapping_error(tp->pdev, new_addr)) {
+			ret = -1;
+			dev_kfree_skb(new_skb);
+			new_skb = NULL;
 
 		/* Make sure new skb does not cross any 4G boundaries.
 		 * Drop the packet if it does.
 		 */
-		if (ret || tg3_4g_overflow_test(new_addr, new_skb->len)) {
-			if (!ret)
-				skb_dma_unmap(&tp->pdev->dev, new_skb,
-					      DMA_TO_DEVICE);
+		} else if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+			    tg3_4g_overflow_test(new_addr, new_skb->len)) {
+			pci_unmap_single(tp->pdev, new_addr, new_skb->len,
+					 PCI_DMA_TODEVICE);
 			ret = -1;
 			dev_kfree_skb(new_skb);
 			new_skb = NULL;
@@ -5141,15 +5369,28 @@
 	/* Now clean up the sw ring entries. */
 	i = 0;
 	while (entry != last_plus_one) {
+		int len;
+
 		if (i == 0)
-			tnapi->tx_buffers[entry].skb = new_skb;
+			len = skb_headlen(skb);
 		else
+			len = skb_shinfo(skb)->frags[i-1].size;
+
+		pci_unmap_single(tp->pdev,
+				 pci_unmap_addr(&tnapi->tx_buffers[entry],
+						mapping),
+				 len, PCI_DMA_TODEVICE);
+		if (i == 0) {
+			tnapi->tx_buffers[entry].skb = new_skb;
+			pci_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
+					   new_addr);
+		} else {
 			tnapi->tx_buffers[entry].skb = NULL;
+		}
 		entry = NEXT_TX(entry);
 		i++;
 	}
 
-	skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
 	dev_kfree_skb(skb);
 
 	return ret;
@@ -5179,21 +5420,22 @@
 }
 
 /* hard_start_xmit for devices that don't have any bugs and
- * support TG3_FLG2_HW_TSO_2 only.
+ * support TG3_FLG2_HW_TSO_2 and TG3_FLG2_HW_TSO_3 only.
  */
 static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
 				  struct net_device *dev)
 {
 	struct tg3 *tp = netdev_priv(dev);
 	u32 len, entry, base_flags, mss;
-	struct skb_shared_info *sp;
 	dma_addr_t mapping;
 	struct tg3_napi *tnapi;
 	struct netdev_queue *txq;
+	unsigned int i, last;
+
 
 	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
 	tnapi = &tp->napi[skb_get_queue_mapping(skb)];
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
 		tnapi++;
 
 	/* We are running in BH disabled context with netif_tx_lock
@@ -5238,7 +5480,7 @@
 			hdrlen = ip_tcp_len + tcp_opt_len;
 		}
 
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
 			mss |= (hdrlen & 0xc) << 12;
 			if (hdrlen & 0x10)
 				base_flags |= 0x00000010;
@@ -5260,20 +5502,19 @@
 			       (vlan_tx_tag_get(skb) << 16));
 #endif
 
-	if (skb_dma_map(&tp->pdev->dev, skb, DMA_TO_DEVICE)) {
+	len = skb_headlen(skb);
+
+	/* Queue skb data, a.k.a. the main skb fragment. */
+	mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(tp->pdev, mapping)) {
 		dev_kfree_skb(skb);
 		goto out_unlock;
 	}
 
-	sp = skb_shinfo(skb);
-
-	mapping = sp->dma_head;
-
 	tnapi->tx_buffers[entry].skb = skb;
+	pci_unmap_addr_set(&tnapi->tx_buffers[entry], mapping, mapping);
 
-	len = skb_headlen(skb);
-
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
 	    !mss && skb->len > ETH_DATA_LEN)
 		base_flags |= TXD_FLAG_JMB_PKT;
 
@@ -5284,15 +5525,21 @@
 
 	/* Now loop through additional data fragments, and queue them. */
 	if (skb_shinfo(skb)->nr_frags > 0) {
-		unsigned int i, last;
-
 		last = skb_shinfo(skb)->nr_frags - 1;
 		for (i = 0; i <= last; i++) {
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = sp->dma_maps[i];
+			mapping = pci_map_page(tp->pdev,
+					       frag->page,
+					       frag->page_offset,
+					       len, PCI_DMA_TODEVICE);
+			if (pci_dma_mapping_error(tp->pdev, mapping))
+				goto dma_error;
+
 			tnapi->tx_buffers[entry].skb = NULL;
+			pci_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
+					   mapping);
 
 			tg3_set_txd(tnapi, entry, mapping, len,
 				    base_flags, (i == last) | (mss << 1));
@@ -5315,6 +5562,27 @@
 	mmiowb();
 
 	return NETDEV_TX_OK;
+
+dma_error:
+	last = i;
+	entry = tnapi->tx_prod;
+	tnapi->tx_buffers[entry].skb = NULL;
+	pci_unmap_single(tp->pdev,
+			 pci_unmap_addr(&tnapi->tx_buffers[entry], mapping),
+			 skb_headlen(skb),
+			 PCI_DMA_TODEVICE);
+	for (i = 0; i <= last; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		entry = NEXT_TX(entry);
+
+		pci_unmap_page(tp->pdev,
+			       pci_unmap_addr(&tnapi->tx_buffers[entry],
+					      mapping),
+			       frag->size, PCI_DMA_TODEVICE);
+	}
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *,
@@ -5362,12 +5630,17 @@
 {
 	struct tg3 *tp = netdev_priv(dev);
 	u32 len, entry, base_flags, mss;
-	struct skb_shared_info *sp;
 	int would_hit_hwbug;
 	dma_addr_t mapping;
-	struct tg3_napi *tnapi = &tp->napi[0];
+	struct tg3_napi *tnapi;
+	struct netdev_queue *txq;
+	unsigned int i, last;
 
-	len = skb_headlen(skb);
+
+	txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
+	tnapi = &tp->napi[skb_get_queue_mapping(skb)];
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
+		tnapi++;
 
 	/* We are running in BH disabled context with netif_tx_lock
 	 * and TX reclaim runs via tp->napi.poll inside of a software
@@ -5375,8 +5648,8 @@
 	 * no IRQ context deadlocks to worry about either.  Rejoice!
 	 */
 	if (unlikely(tg3_tx_avail(tnapi) <= (skb_shinfo(skb)->nr_frags + 1))) {
-		if (!netif_queue_stopped(dev)) {
-			netif_stop_queue(dev);
+		if (!netif_tx_queue_stopped(txq)) {
+			netif_tx_stop_queue(txq);
 
 			/* This is a hard error, log it. */
 			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
@@ -5389,10 +5662,10 @@
 	base_flags = 0;
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
 		base_flags |= TXD_FLAG_TCPUDP_CSUM;
-	mss = 0;
+
 	if ((mss = skb_shinfo(skb)->gso_size) != 0) {
 		struct iphdr *iph;
-		int tcp_opt_len, ip_tcp_len, hdr_len;
+		u32 tcp_opt_len, ip_tcp_len, hdr_len;
 
 		if (skb_header_cloned(skb) &&
 		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
@@ -5423,8 +5696,15 @@
 								 IPPROTO_TCP,
 								 0);
 
-		if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
-		    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
+		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) {
+			mss |= (hdr_len & 0xc) << 12;
+			if (hdr_len & 0x10)
+				base_flags |= 0x00000010;
+			base_flags |= (hdr_len & 0x3e0) << 5;
+		} else if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)
+			mss |= hdr_len << 9;
+		else if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_1) ||
+			 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
 			if (tcp_opt_len || iph->ihl > 5) {
 				int tsflags;
 
@@ -5446,22 +5726,35 @@
 			       (vlan_tx_tag_get(skb) << 16));
 #endif
 
-	if (skb_dma_map(&tp->pdev->dev, skb, DMA_TO_DEVICE)) {
+	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
+	    !mss && skb->len > ETH_DATA_LEN)
+		base_flags |= TXD_FLAG_JMB_PKT;
+
+	len = skb_headlen(skb);
+
+	mapping = pci_map_single(tp->pdev, skb->data, len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(tp->pdev, mapping)) {
 		dev_kfree_skb(skb);
 		goto out_unlock;
 	}
 
-	sp = skb_shinfo(skb);
-
-	mapping = sp->dma_head;
-
 	tnapi->tx_buffers[entry].skb = skb;
+	pci_unmap_addr_set(&tnapi->tx_buffers[entry], mapping, mapping);
 
 	would_hit_hwbug = 0;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
+	if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) && len <= 8)
 		would_hit_hwbug = 1;
-	else if (tg3_4g_overflow_test(mapping, len))
+
+	if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+	    tg3_4g_overflow_test(mapping, len))
+		would_hit_hwbug = 1;
+
+	if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+	    tg3_40bit_overflow_test(tp, mapping, len))
+		would_hit_hwbug = 1;
+
+	if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
 		would_hit_hwbug = 1;
 
 	tg3_set_txd(tnapi, entry, mapping, len, base_flags,
@@ -5471,21 +5764,32 @@
 
 	/* Now loop through additional data fragments, and queue them. */
 	if (skb_shinfo(skb)->nr_frags > 0) {
-		unsigned int i, last;
-
 		last = skb_shinfo(skb)->nr_frags - 1;
 		for (i = 0; i <= last; i++) {
 			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 			len = frag->size;
-			mapping = sp->dma_maps[i];
+			mapping = pci_map_page(tp->pdev,
+					       frag->page,
+					       frag->page_offset,
+					       len, PCI_DMA_TODEVICE);
 
 			tnapi->tx_buffers[entry].skb = NULL;
+			pci_unmap_addr_set(&tnapi->tx_buffers[entry], mapping,
+					   mapping);
+			if (pci_dma_mapping_error(tp->pdev, mapping))
+				goto dma_error;
 
-			if (tg3_4g_overflow_test(mapping, len))
+			if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) &&
+			    len <= 8)
 				would_hit_hwbug = 1;
 
-			if (tg3_40bit_overflow_test(tp, mapping, len))
+			if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+			    tg3_4g_overflow_test(mapping, len))
+				would_hit_hwbug = 1;
+
+			if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+			    tg3_40bit_overflow_test(tp, mapping, len))
 				would_hit_hwbug = 1;
 
 			if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
@@ -5509,7 +5813,7 @@
 		/* If the workaround fails due to memory/mapping
 		 * failure, silently drop this packet.
 		 */
-		if (tigon3_dma_hwbug_workaround(tp, skb, last_plus_one,
+		if (tigon3_dma_hwbug_workaround(tnapi, skb, last_plus_one,
 						&start, base_flags, mss))
 			goto out_unlock;
 
@@ -5517,19 +5821,40 @@
 	}
 
 	/* Packets are ready, update Tx producer idx local and on card. */
-	tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, entry);
+	tw32_tx_mbox(tnapi->prodmbox, entry);
 
 	tnapi->tx_prod = entry;
 	if (unlikely(tg3_tx_avail(tnapi) <= (MAX_SKB_FRAGS + 1))) {
-		netif_stop_queue(dev);
+		netif_tx_stop_queue(txq);
 		if (tg3_tx_avail(tnapi) > TG3_TX_WAKEUP_THRESH(tnapi))
-			netif_wake_queue(tp->dev);
+			netif_tx_wake_queue(txq);
 	}
 
 out_unlock:
 	mmiowb();
 
 	return NETDEV_TX_OK;
+
+dma_error:
+	last = i;
+	entry = tnapi->tx_prod;
+	tnapi->tx_buffers[entry].skb = NULL;
+	pci_unmap_single(tp->pdev,
+			 pci_unmap_addr(&tnapi->tx_buffers[entry], mapping),
+			 skb_headlen(skb),
+			 PCI_DMA_TODEVICE);
+	for (i = 0; i <= last; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		entry = NEXT_TX(entry);
+
+		pci_unmap_page(tp->pdev,
+			       pci_unmap_addr(&tnapi->tx_buffers[entry],
+					      mapping),
+			       frag->size, PCI_DMA_TODEVICE);
+	}
+
+	dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
 }
 
 static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
@@ -5594,36 +5919,33 @@
 				 struct tg3_rx_prodring_set *tpr)
 {
 	int i;
-	struct ring_info *rxp;
 
-	for (i = 0; i < TG3_RX_RING_SIZE; i++) {
-		rxp = &tpr->rx_std_buffers[i];
+	if (tpr != &tp->prodring[0]) {
+		for (i = tpr->rx_std_cons_idx; i != tpr->rx_std_prod_idx;
+		     i = (i + 1) % TG3_RX_RING_SIZE)
+			tg3_rx_skb_free(tp, &tpr->rx_std_buffers[i],
+					tp->rx_pkt_map_sz);
 
-		if (rxp->skb == NULL)
-			continue;
+		if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
+			for (i = tpr->rx_jmb_cons_idx;
+			     i != tpr->rx_jmb_prod_idx;
+			     i = (i + 1) % TG3_RX_JUMBO_RING_SIZE) {
+				tg3_rx_skb_free(tp, &tpr->rx_jmb_buffers[i],
+						TG3_RX_JMB_MAP_SZ);
+			}
+		}
 
-		pci_unmap_single(tp->pdev,
-				 pci_unmap_addr(rxp, mapping),
-				 tp->rx_pkt_map_sz,
-				 PCI_DMA_FROMDEVICE);
-		dev_kfree_skb_any(rxp->skb);
-		rxp->skb = NULL;
+		return;
 	}
 
+	for (i = 0; i < TG3_RX_RING_SIZE; i++)
+		tg3_rx_skb_free(tp, &tpr->rx_std_buffers[i],
+				tp->rx_pkt_map_sz);
+
 	if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
-		for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++) {
-			rxp = &tpr->rx_jmb_buffers[i];
-
-			if (rxp->skb == NULL)
-				continue;
-
-			pci_unmap_single(tp->pdev,
-					 pci_unmap_addr(rxp, mapping),
-					 TG3_RX_JMB_MAP_SZ,
-					 PCI_DMA_FROMDEVICE);
-			dev_kfree_skb_any(rxp->skb);
-			rxp->skb = NULL;
-		}
+		for (i = 0; i < TG3_RX_JUMBO_RING_SIZE; i++)
+			tg3_rx_skb_free(tp, &tpr->rx_jmb_buffers[i],
+					TG3_RX_JMB_MAP_SZ);
 	}
 }
 
@@ -5638,7 +5960,19 @@
 				 struct tg3_rx_prodring_set *tpr)
 {
 	u32 i, rx_pkt_dma_sz;
-	struct tg3_napi *tnapi = &tp->napi[0];
+
+	tpr->rx_std_cons_idx = 0;
+	tpr->rx_std_prod_idx = 0;
+	tpr->rx_jmb_cons_idx = 0;
+	tpr->rx_jmb_prod_idx = 0;
+
+	if (tpr != &tp->prodring[0]) {
+		memset(&tpr->rx_std_buffers[0], 0, TG3_RX_STD_BUFF_RING_SIZE);
+		if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE)
+			memset(&tpr->rx_jmb_buffers[0], 0,
+			       TG3_RX_JMB_BUFF_RING_SIZE);
+		goto done;
+	}
 
 	/* Zero out all descriptors. */
 	memset(tpr->rx_std, 0, TG3_RX_RING_BYTES);
@@ -5665,7 +5999,7 @@
 
 	/* Now allocate fresh SKBs for each rx ring. */
 	for (i = 0; i < tp->rx_pending; i++) {
-		if (tg3_alloc_rx_skb(tnapi, RXD_OPAQUE_RING_STD, -1, i) < 0) {
+		if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_STD, i) < 0) {
 			printk(KERN_WARNING PFX
 			       "%s: Using a smaller RX standard ring, "
 			       "only %d out of %d buffers were allocated "
@@ -5696,8 +6030,8 @@
 		}
 
 		for (i = 0; i < tp->rx_jumbo_pending; i++) {
-			if (tg3_alloc_rx_skb(tnapi, RXD_OPAQUE_RING_JUMBO,
-					     -1, i) < 0) {
+			if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO,
+					     i) < 0) {
 				printk(KERN_WARNING PFX
 				       "%s: Using a smaller RX jumbo ring, "
 				       "only %d out of %d buffers were "
@@ -5741,8 +6075,7 @@
 static int tg3_rx_prodring_init(struct tg3 *tp,
 				struct tg3_rx_prodring_set *tpr)
 {
-	tpr->rx_std_buffers = kzalloc(sizeof(struct ring_info) *
-				      TG3_RX_RING_SIZE, GFP_KERNEL);
+	tpr->rx_std_buffers = kzalloc(TG3_RX_STD_BUFF_RING_SIZE, GFP_KERNEL);
 	if (!tpr->rx_std_buffers)
 		return -ENOMEM;
 
@@ -5752,8 +6085,7 @@
 		goto err_out;
 
 	if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
-		tpr->rx_jmb_buffers = kzalloc(sizeof(struct ring_info) *
-					      TG3_RX_JUMBO_RING_SIZE,
+		tpr->rx_jmb_buffers = kzalloc(TG3_RX_JMB_BUFF_RING_SIZE,
 					      GFP_KERNEL);
 		if (!tpr->rx_jmb_buffers)
 			goto err_out;
@@ -5790,8 +6122,9 @@
 			continue;
 
 		for (i = 0; i < TG3_TX_RING_SIZE; ) {
-			struct tx_ring_info *txp;
+			struct ring_info *txp;
 			struct sk_buff *skb;
+			unsigned int k;
 
 			txp = &tnapi->tx_buffers[i];
 			skb = txp->skb;
@@ -5801,17 +6134,29 @@
 				continue;
 			}
 
-			skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
-
+			pci_unmap_single(tp->pdev,
+					 pci_unmap_addr(txp, mapping),
+					 skb_headlen(skb),
+					 PCI_DMA_TODEVICE);
 			txp->skb = NULL;
 
-			i += skb_shinfo(skb)->nr_frags + 1;
+			i++;
+
+			for (k = 0; k < skb_shinfo(skb)->nr_frags; k++) {
+				txp = &tnapi->tx_buffers[i & (TG3_TX_RING_SIZE - 1)];
+				pci_unmap_page(tp->pdev,
+					       pci_unmap_addr(txp, mapping),
+					       skb_shinfo(skb)->frags[k].size,
+					       PCI_DMA_TODEVICE);
+				i++;
+			}
 
 			dev_kfree_skb_any(skb);
 		}
-	}
 
-	tg3_rx_prodring_free(tp, &tp->prodring[0]);
+		if (tp->irq_cnt == 1 || j != tp->irq_cnt - 1)
+			tg3_rx_prodring_free(tp, &tp->prodring[j]);
+	}
 }
 
 /* Initialize tx/rx rings for packet processing.
@@ -5845,9 +6190,13 @@
 		tnapi->rx_rcb_ptr = 0;
 		if (tnapi->rx_rcb)
 			memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
+
+		if ((tp->irq_cnt == 1 || i != tp->irq_cnt - 1) &&
+			tg3_rx_prodring_alloc(tp, &tp->prodring[i]))
+			return -ENOMEM;
 	}
 
-	return tg3_rx_prodring_alloc(tp, &tp->prodring[0]);
+	return 0;
 }
 
 /*
@@ -5891,7 +6240,8 @@
 		tp->hw_stats = NULL;
 	}
 
-	tg3_rx_prodring_fini(tp, &tp->prodring[0]);
+	for (i = 0; i < (tp->irq_cnt == 1 ? 1 : tp->irq_cnt - 1); i++)
+		tg3_rx_prodring_fini(tp, &tp->prodring[i]);
 }
 
 /*
@@ -5902,8 +6252,10 @@
 {
 	int i;
 
-	if (tg3_rx_prodring_init(tp, &tp->prodring[0]))
-		return -ENOMEM;
+	for (i = 0; i < (tp->irq_cnt == 1 ? 1 : tp->irq_cnt - 1); i++) {
+		if (tg3_rx_prodring_init(tp, &tp->prodring[i]))
+			goto err_out;
+	}
 
 	tp->hw_stats = pci_alloc_consistent(tp->pdev,
 					    sizeof(struct tg3_hw_stats),
@@ -5926,6 +6278,24 @@
 		memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
 		sblk = tnapi->hw_status;
 
+		/* If multivector TSS is enabled, vector 0 does not handle
+		 * tx interrupts.  Don't allocate any resources for it.
+		 */
+		if ((!i && !(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)) ||
+		    (i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS))) {
+			tnapi->tx_buffers = kzalloc(sizeof(struct ring_info) *
+						    TG3_TX_RING_SIZE,
+						    GFP_KERNEL);
+			if (!tnapi->tx_buffers)
+				goto err_out;
+
+			tnapi->tx_ring = pci_alloc_consistent(tp->pdev,
+							      TG3_TX_RING_BYTES,
+						       &tnapi->tx_desc_mapping);
+			if (!tnapi->tx_ring)
+				goto err_out;
+		}
+
 		/*
 		 * When RSS is enabled, the status block format changes
 		 * slightly.  The "rx_jumbo_consumer", "reserved",
@@ -5947,6 +6317,11 @@
 			break;
 		}
 
+		if (tp->irq_cnt == 1)
+			tnapi->prodring = &tp->prodring[0];
+		else if (i)
+			tnapi->prodring = &tp->prodring[i - 1];
+
 		/*
 		 * If multivector RSS is enabled, vector 0 does not handle
 		 * rx or tx interrupts.  Don't allocate any resources for it.
@@ -5961,17 +6336,6 @@
 			goto err_out;
 
 		memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
-
-		tnapi->tx_buffers = kzalloc(sizeof(struct tx_ring_info) *
-					    TG3_TX_RING_SIZE, GFP_KERNEL);
-		if (!tnapi->tx_buffers)
-			goto err_out;
-
-		tnapi->tx_ring = pci_alloc_consistent(tp->pdev,
-						      TG3_TX_RING_BYTES,
-						      &tnapi->tx_desc_mapping);
-		if (!tnapi->tx_ring)
-			goto err_out;
 	}
 
 	return 0;
@@ -6580,10 +6944,35 @@
 
 	tg3_mdio_start(tp);
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
+		u8 phy_addr;
+
+		phy_addr = tp->phy_addr;
+		tp->phy_addr = TG3_PHY_PCIE_ADDR;
+
+		tg3_writephy(tp, TG3_PCIEPHY_BLOCK_ADDR,
+			     TG3_PCIEPHY_TXB_BLK << TG3_PCIEPHY_BLOCK_SHIFT);
+		val = TG3_PCIEPHY_TX0CTRL1_TXOCM | TG3_PCIEPHY_TX0CTRL1_RDCTL |
+		      TG3_PCIEPHY_TX0CTRL1_TXCMV | TG3_PCIEPHY_TX0CTRL1_TKSEL |
+		      TG3_PCIEPHY_TX0CTRL1_NB_EN;
+		tg3_writephy(tp, TG3_PCIEPHY_TX0CTRL1, val);
+		udelay(10);
+
+		tg3_writephy(tp, TG3_PCIEPHY_BLOCK_ADDR,
+			     TG3_PCIEPHY_XGXS_BLK1 << TG3_PCIEPHY_BLOCK_SHIFT);
+		val = TG3_PCIEPHY_PWRMGMT4_LOWPWR_EN |
+		      TG3_PCIEPHY_PWRMGMT4_L1PLLPD_EN;
+		tg3_writephy(tp, TG3_PCIEPHY_PWRMGMT4, val);
+		udelay(10);
+
+		tp->phy_addr = phy_addr;
+	}
+
 	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
 	    tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765) {
 		val = tr32(0x7c00);
 
 		tw32(0x7c00, val | (1 << 25));
@@ -6935,19 +7324,21 @@
 {
 	int i;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
+	if (!(tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)) {
 		tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs);
 		tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames);
 		tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq);
-
-		tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
-		tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
-		tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
 	} else {
 		tw32(HOSTCC_TXCOL_TICKS, 0);
 		tw32(HOSTCC_TXMAX_FRAMES, 0);
 		tw32(HOSTCC_TXCOAL_MAXF_INT, 0);
+	}
 
+	if (!(tp->tg3_flags2 & TG3_FLG2_USING_MSIX)) {
+		tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs);
+		tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames);
+		tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq);
+	} else {
 		tw32(HOSTCC_RXCOL_TICKS, 0);
 		tw32(HOSTCC_RXMAX_FRAMES, 0);
 		tw32(HOSTCC_RXCOAL_MAXF_INT, 0);
@@ -6970,25 +7361,31 @@
 
 		reg = HOSTCC_RXCOL_TICKS_VEC1 + i * 0x18;
 		tw32(reg, ec->rx_coalesce_usecs);
-		reg = HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18;
-		tw32(reg, ec->tx_coalesce_usecs);
 		reg = HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18;
 		tw32(reg, ec->rx_max_coalesced_frames);
-		reg = HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18;
-		tw32(reg, ec->tx_max_coalesced_frames);
 		reg = HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18;
 		tw32(reg, ec->rx_max_coalesced_frames_irq);
-		reg = HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18;
-		tw32(reg, ec->tx_max_coalesced_frames_irq);
+
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS) {
+			reg = HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18;
+			tw32(reg, ec->tx_coalesce_usecs);
+			reg = HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18;
+			tw32(reg, ec->tx_max_coalesced_frames);
+			reg = HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18;
+			tw32(reg, ec->tx_max_coalesced_frames_irq);
+		}
 	}
 
 	for (; i < tp->irq_max - 1; i++) {
 		tw32(HOSTCC_RXCOL_TICKS_VEC1 + i * 0x18, 0);
-		tw32(HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18, 0);
 		tw32(HOSTCC_RXMAX_FRAMES_VEC1 + i * 0x18, 0);
-		tw32(HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18, 0);
 		tw32(HOSTCC_RXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
-		tw32(HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
+
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS) {
+			tw32(HOSTCC_TXCOL_TICKS_VEC1 + i * 0x18, 0);
+			tw32(HOSTCC_TXMAX_FRAMES_VEC1 + i * 0x18, 0);
+			tw32(HOSTCC_TXCOAL_MAXF_INT_VEC1 + i * 0x18, 0);
+		}
 	}
 }
 
@@ -7002,6 +7399,8 @@
 	/* Disable all transmit rings but the first. */
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
 		limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 16;
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE * 2;
 	else
 		limit = NIC_SRAM_SEND_RCB + TG3_BDINFO_SIZE;
 
@@ -7016,7 +7415,8 @@
 		limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 17;
 	else if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
 		limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 16;
-	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+		 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE * 4;
 	else
 		limit = NIC_SRAM_RCV_RET_RCB + TG3_BDINFO_SIZE;
@@ -7089,17 +7489,19 @@
 		/* Clear status block in ram. */
 		memset(tnapi->hw_status, 0, TG3_HW_STATUS_SIZE);
 
-		tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
-			       (TG3_TX_RING_SIZE <<
-				BDINFO_FLAGS_MAXLEN_SHIFT),
-			       NIC_SRAM_TX_BUFFER_DESC);
+		if (tnapi->tx_ring) {
+			tg3_set_bdinfo(tp, txrcb, tnapi->tx_desc_mapping,
+				       (TG3_TX_RING_SIZE <<
+					BDINFO_FLAGS_MAXLEN_SHIFT),
+				       NIC_SRAM_TX_BUFFER_DESC);
+			txrcb += TG3_BDINFO_SIZE;
+		}
 
 		tg3_set_bdinfo(tp, rxrcb, tnapi->rx_rcb_mapping,
 			       (TG3_RX_RCB_RING_SIZE(tp) <<
 				BDINFO_FLAGS_MAXLEN_SHIFT), 0);
 
 		stblk += 8;
-		txrcb += TG3_BDINFO_SIZE;
 		rxrcb += TG3_BDINFO_SIZE;
 	}
 }
@@ -7162,15 +7564,9 @@
 		tw32(TG3_PCIE_EIDLE_DELAY, val | TG3_PCIE_EIDLE_DELAY_13_CLKS);
 
 		tw32(TG3_CORR_ERR_STAT, TG3_CORR_ERR_STAT_CLEAR);
-	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
-		val = tr32(TG3_PCIE_LNKCTL);
-		if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG)
-			val |= TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
-		else
-			val &= ~TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
-		tw32(TG3_PCIE_LNKCTL, val);
+		val = tr32(TG3_PCIE_LNKCTL) & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
+		tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
 	}
 
 	/* This works around an issue with Athlon chipsets on
@@ -7217,9 +7613,13 @@
 	if (err)
 		return err;
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
+		val = tr32(TG3PCI_DMA_RW_CTRL) &
+		      ~DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
+		tw32(TG3PCI_DMA_RW_CTRL, val | tp->dma_rwctrl);
+	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5784 &&
+		   GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5761) {
 		/* This value is determined during the probe time DMA
 		 * engine test, tg3_test_dma.
 		 */
@@ -7342,8 +7742,9 @@
 	     ((u64) tpr->rx_std_mapping >> 32));
 	tw32(RCVDBDI_STD_BD + TG3_BDINFO_HOST_ADDR + TG3_64BIT_REG_LOW,
 	     ((u64) tpr->rx_std_mapping & 0xffffffff));
-	tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
-	     NIC_SRAM_RX_BUFFER_DESC);
+	if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS))
+		tw32(RCVDBDI_STD_BD + TG3_BDINFO_NIC_ADDR,
+		     NIC_SRAM_RX_BUFFER_DESC);
 
 	/* Disable the mini ring */
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
@@ -7366,14 +7767,16 @@
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
 			     (RX_JUMBO_MAX_SIZE << BDINFO_FLAGS_MAXLEN_SHIFT) |
 			     BDINFO_FLAGS_USE_EXT_RECV);
-			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
-			     NIC_SRAM_RX_JUMBO_BUFFER_DESC);
+			if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+				tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_NIC_ADDR,
+				     NIC_SRAM_RX_JUMBO_BUFFER_DESC);
 		} else {
 			tw32(RCVDBDI_JUMBO_BD + TG3_BDINFO_MAXLEN_FLAGS,
 			     BDINFO_FLAGS_DISABLED);
 		}
 
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 			val = (RX_STD_MAX_SIZE_5705 << BDINFO_FLAGS_MAXLEN_SHIFT) |
 			      (RX_STD_MAX_SIZE << 2);
 		else
@@ -7383,16 +7786,15 @@
 
 	tw32(RCVDBDI_STD_BD + TG3_BDINFO_MAXLEN_FLAGS, val);
 
-	tpr->rx_std_ptr = tp->rx_pending;
-	tw32_rx_mbox(MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW,
-		     tpr->rx_std_ptr);
+	tpr->rx_std_prod_idx = tp->rx_pending;
+	tw32_rx_mbox(TG3_RX_STD_PROD_IDX_REG, tpr->rx_std_prod_idx);
 
-	tpr->rx_jmb_ptr = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
+	tpr->rx_jmb_prod_idx = (tp->tg3_flags & TG3_FLAG_JUMBO_RING_ENABLE) ?
 			  tp->rx_jumbo_pending : 0;
-	tw32_rx_mbox(MAILBOX_RCV_JUMBO_PROD_IDX + TG3_64BIT_REG_LOW,
-		     tpr->rx_jmb_ptr);
+	tw32_rx_mbox(TG3_RX_JMB_PROD_IDX_REG, tpr->rx_jmb_prod_idx);
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
 		tw32(STD_REPLENISH_LWM, 32);
 		tw32(JMB_REPLENISH_LWM, 16);
 	}
@@ -7453,7 +7855,8 @@
 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
 		rdmac_mode |= RDMAC_MODE_IPV4_LSO_EN;
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
+	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 		rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
 
@@ -7602,6 +8005,9 @@
 	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
 		val |= WDMAC_MODE_STATUS_TAG_FIX;
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+		val |= WDMAC_MODE_BURST_ALL_DATA;
+
 	tw32_f(WDMAC_MODE, val);
 	udelay(40);
 
@@ -7641,7 +8047,7 @@
 	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
 		tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
 	val = SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE;
-	if (tp->tg3_flags2 & TG3_FLG2_USING_MSIX)
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_TSS)
 		val |= SNDBDI_MODE_MULTI_TXQ_EN;
 	tw32(SNDBDI_MODE, val);
 	tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
@@ -8065,7 +8471,8 @@
 	 * Turn off MSI one shot mode.  Otherwise this test has no
 	 * observable way to know whether the interrupt was delivered.
 	 */
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) &&
 	    (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
 		val = tr32(MSGINT_MODE) | MSGINT_MODE_ONE_SHOT_DISABLE;
 		tw32(MSGINT_MODE, val);
@@ -8108,7 +8515,8 @@
 
 	if (intr_ok) {
 		/* Reenable MSI one shot mode. */
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 &&
+		if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+		     GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) &&
 		    (tp->tg3_flags2 & TG3_FLG2_USING_MSI)) {
 			val = tr32(MSGINT_MODE) & ~MSGINT_MODE_ONE_SHOT_DISABLE;
 			tw32(MSGINT_MODE, val);
@@ -8249,7 +8657,11 @@
 	for (i = 0; i < tp->irq_max; i++)
 		tp->napi[i].irq_vec = msix_ent[i].vector;
 
-	tp->dev->real_num_tx_queues = tp->irq_cnt - 1;
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
+		tp->tg3_flags3 |= TG3_FLG3_ENABLE_TSS;
+		tp->dev->real_num_tx_queues = tp->irq_cnt - 1;
+	} else
+		tp->dev->real_num_tx_queues = 1;
 
 	return true;
 }
@@ -8400,6 +8812,7 @@
 		}
 
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+		    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765 &&
 		    (tp->tg3_flags2 & TG3_FLG2_USING_MSI) &&
 		    (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI)) {
 			u32 val = tr32(PCIE_TRANSACTION_CFG);
@@ -9240,9 +9653,11 @@
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		struct phy_device *phydev;
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		return phy_ethtool_gset(tp->mdio_bus->phy_map[PHY_ADDR], cmd);
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		return phy_ethtool_gset(phydev, cmd);
 	}
 
 	cmd->supported = (SUPPORTED_Autoneg);
@@ -9281,9 +9696,11 @@
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		struct phy_device *phydev;
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		return phy_ethtool_sset(tp->mdio_bus->phy_map[PHY_ADDR], cmd);
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		return phy_ethtool_sset(phydev, cmd);
 	}
 
 	if (cmd->autoneg != AUTONEG_ENABLE &&
@@ -9436,15 +9853,16 @@
 		return 0;
 	}
 	if ((dev->features & NETIF_F_IPV6_CSUM) &&
-	    (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)) {
+	    ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
+	     (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3))) {
 		if (value) {
 			dev->features |= NETIF_F_TSO6;
-			if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
+			if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 			    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
 			     GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
 			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+			    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 				dev->features |= NETIF_F_TSO_ECN;
 		} else
 			dev->features &= ~(NETIF_F_TSO6 | NETIF_F_TSO_ECN);
@@ -9466,7 +9884,7 @@
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		r = phy_start_aneg(tp->mdio_bus->phy_map[PHY_ADDR]);
+		r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 	} else {
 		u32 bmcr;
 
@@ -9585,7 +10003,7 @@
 			u32 newadv;
 			struct phy_device *phydev;
 
-			phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+			phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 			if (epause->rx_pause) {
 				if (epause->tx_pause)
@@ -10339,6 +10757,10 @@
 		tx_data[i] = (u8) (i & 0xff);
 
 	map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(tp->pdev, map)) {
+		dev_kfree_skb(skb);
+		return -EIO;
+	}
 
 	tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
 	       rnapi->coal_now);
@@ -10359,8 +10781,8 @@
 
 	udelay(10);
 
-	/* 250 usec to allow enough time on some 10/100 Mbps devices.  */
-	for (i = 0; i < 25; i++) {
+	/* 350 usec to allow enough time on some 10/100 Mbps devices.  */
+	for (i = 0; i < 35; i++) {
 		tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
 		       coal_now);
 
@@ -10565,9 +10987,11 @@
 	int err;
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		struct phy_device *phydev;
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		return phy_mii_ioctl(tp->mdio_bus->phy_map[PHY_ADDR], data, cmd);
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		return phy_mii_ioctl(phydev, data, cmd);
 	}
 
 	switch(cmd) {
@@ -10887,7 +11311,7 @@
 
 	/* NVRAM protection for TPM */
 	if (nvcfg1 & (1 << 27))
-		tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
+		tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
 
 	switch (nvcfg1 & NVRAM_CFG1_5752VENDOR_MASK) {
 	case FLASH_5752VENDOR_ATMEL_EEPROM_64KHZ:
@@ -10928,7 +11352,7 @@
 
 	/* NVRAM protection for TPM */
 	if (nvcfg1 & (1 << 27)) {
-		tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
+		tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
 		protect = 1;
 	}
 
@@ -11022,7 +11446,7 @@
 
 	/* NVRAM protection for TPM */
 	if (nvcfg1 & (1 << 27)) {
-		tp->tg3_flags2 |= TG3_FLG2_PROTECTED_NVRAM;
+		tp->tg3_flags3 |= TG3_FLG3_PROTECTED_NVRAM;
 		protect = 1;
 	}
 
@@ -11283,7 +11707,8 @@
 			tg3_get_5761_nvram_info(tp);
 		else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 			tg3_get_5906_nvram_info(tp);
-		else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+		else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+			 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 			tg3_get_57780_nvram_info(tp);
 		else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
 			tg3_get_5717_nvram_info(tp);
@@ -11524,7 +11949,7 @@
 
 		tg3_enable_nvram_access(tp);
 		if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) &&
-		    !(tp->tg3_flags2 & TG3_FLG2_PROTECTED_NVRAM))
+		    !(tp->tg3_flags3 & TG3_FLG3_PROTECTED_NVRAM))
 			tw32(NVRAM_WRITE1, 0x406);
 
 		grc_mode = tr32(GRC_MODE);
@@ -12008,7 +12433,7 @@
 
 static void __devinit tg3_read_partno(struct tg3 *tp)
 {
-	unsigned char vpd_data[256];   /* in little-endian format */
+	unsigned char vpd_data[TG3_NVM_VPD_LEN];   /* in little-endian format */
 	unsigned int i;
 	u32 magic;
 
@@ -12017,48 +12442,37 @@
 		goto out_not_found;
 
 	if (magic == TG3_EEPROM_MAGIC) {
-		for (i = 0; i < 256; i += 4) {
+		for (i = 0; i < TG3_NVM_VPD_LEN; i += 4) {
 			u32 tmp;
 
 			/* The data is in little-endian format in NVRAM.
 			 * Use the big-endian read routines to preserve
 			 * the byte order as it exists in NVRAM.
 			 */
-			if (tg3_nvram_read_be32(tp, 0x100 + i, &tmp))
+			if (tg3_nvram_read_be32(tp, TG3_NVM_VPD_OFF + i, &tmp))
 				goto out_not_found;
 
 			memcpy(&vpd_data[i], &tmp, sizeof(tmp));
 		}
 	} else {
-		int vpd_cap;
+		ssize_t cnt;
+		unsigned int pos = 0, i = 0;
 
-		vpd_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_VPD);
-		for (i = 0; i < 256; i += 4) {
-			u32 tmp, j = 0;
-			__le32 v;
-			u16 tmp16;
-
-			pci_write_config_word(tp->pdev, vpd_cap + PCI_VPD_ADDR,
-					      i);
-			while (j++ < 100) {
-				pci_read_config_word(tp->pdev, vpd_cap +
-						     PCI_VPD_ADDR, &tmp16);
-				if (tmp16 & 0x8000)
-					break;
-				msleep(1);
-			}
-			if (!(tmp16 & 0x8000))
+		for (; pos < TG3_NVM_VPD_LEN && i < 3; i++, pos += cnt) {
+			cnt = pci_read_vpd(tp->pdev, pos,
+					   TG3_NVM_VPD_LEN - pos,
+					   &vpd_data[pos]);
+			if (cnt == -ETIMEDOUT || -EINTR)
+				cnt = 0;
+			else if (cnt < 0)
 				goto out_not_found;
-
-			pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA,
-					      &tmp);
-			v = cpu_to_le32(tmp);
-			memcpy(&vpd_data[i], &v, sizeof(v));
 		}
+		if (pos != TG3_NVM_VPD_LEN)
+			goto out_not_found;
 	}
 
 	/* Now parse and find the part number. */
-	for (i = 0; i < 254; ) {
+	for (i = 0; i < TG3_NVM_VPD_LEN - 2; ) {
 		unsigned char val = vpd_data[i];
 		unsigned int block_end;
 
@@ -12077,7 +12491,7 @@
 			      (vpd_data[i + 2] << 8)));
 		i += 3;
 
-		if (block_end > 256)
+		if (block_end > TG3_NVM_VPD_LEN)
 			goto out_not_found;
 
 		while (i < (block_end - 2)) {
@@ -12086,7 +12500,8 @@
 				int partno_len = vpd_data[i + 2];
 
 				i += 3;
-				if (partno_len > 24 || (partno_len + i) > 256)
+				if (partno_len > TG3_BPN_SIZE ||
+				    (partno_len + i) > TG3_NVM_VPD_LEN)
 					goto out_not_found;
 
 				memcpy(tp->board_part_number,
@@ -12117,6 +12532,8 @@
 	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 &&
 		 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57788)
 		strcpy(tp->board_part_number, "BCM57788");
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		strcpy(tp->board_part_number, "BCM57765");
 	else
 		strcpy(tp->board_part_number, "none");
 }
@@ -12400,13 +12817,21 @@
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_USE_PROD_ID_REG) {
 		u32 prod_id_asic_rev;
 
-		if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717C ||
-		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717S ||
-		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718C ||
-		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718S)
+		if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5717 ||
+		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 ||
+		    tp->pdev->device == TG3PCI_DEVICE_TIGON3_5724)
 			pci_read_config_dword(tp->pdev,
 					      TG3PCI_GEN2_PRODID_ASICREV,
 					      &prod_id_asic_rev);
+		else if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_57781 ||
+			 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57785 ||
+			 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57761 ||
+			 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57765 ||
+			 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57791 ||
+			 tp->pdev->device == TG3PCI_DEVICE_TIGON3_57795)
+			pci_read_config_dword(tp->pdev,
+					      TG3PCI_GEN15_PRODID_ASICREV,
+					      &prod_id_asic_rev);
 		else
 			pci_read_config_dword(tp->pdev, TG3PCI_PRODID_ASICREV,
 					      &prod_id_asic_rev);
@@ -12560,7 +12985,8 @@
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		tp->tg3_flags3 |= TG3_FLG3_5755_PLUS;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
@@ -12586,6 +13012,30 @@
 			tp->dev->features |= NETIF_F_IPV6_CSUM;
 	}
 
+	/* Determine TSO capabilities */
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		tp->tg3_flags2 |= TG3_FLG2_HW_TSO_3;
+	else if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
+		 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+		tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
+	else if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
+		tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | TG3_FLG2_TSO_BUG;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 &&
+		    tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2)
+			tp->tg3_flags2 &= ~TG3_FLG2_TSO_BUG;
+	} else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
+		   GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 &&
+		   tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) {
+		tp->tg3_flags2 |= TG3_FLG2_TSO_BUG;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
+			tp->fw_needed = FIRMWARE_TG3TSO5;
+		else
+			tp->fw_needed = FIRMWARE_TG3TSO;
+	}
+
+	tp->irq_max = 1;
+
 	if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
 		tp->tg3_flags |= TG3_FLAG_SUPPORT_MSI;
 		if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX ||
@@ -12597,29 +13047,31 @@
 
 		if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-			tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2;
 			tp->tg3_flags2 |= TG3_FLG2_1SHOT_MSI;
-		} else {
-			tp->tg3_flags2 |= TG3_FLG2_HW_TSO_1 | TG3_FLG2_TSO_BUG;
-			if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
-				ASIC_REV_5750 &&
-	     		    tp->pci_chip_rev_id >= CHIPREV_ID_5750_C2)
-				tp->tg3_flags2 &= ~TG3_FLG2_TSO_BUG;
+		}
+
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
+			tp->tg3_flags |= TG3_FLAG_SUPPORT_MSIX;
+			tp->irq_max = TG3_IRQ_MAX_VECS;
 		}
 	}
 
-	tp->irq_max = 1;
-
-#ifdef TG3_NAPI
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
-		tp->tg3_flags |= TG3_FLAG_SUPPORT_MSIX;
-		tp->irq_max = TG3_IRQ_MAX_VECS;
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+		tp->tg3_flags3 |= TG3_FLG3_SHORT_DMA_BUG;
+	else if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS)) {
+		tp->tg3_flags3 |= TG3_FLG3_4G_DMA_BNDRY_BUG;
+		tp->tg3_flags3 |= TG3_FLG3_40BIT_DMA_LIMIT_BUG;
 	}
-#endif
+
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		tp->tg3_flags3 |= TG3_FLG3_USE_JUMBO_BDFLAG;
 
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
 	     (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+		 (tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG))
 		tp->tg3_flags |= TG3_FLAG_JUMBO_CAPABLE;
 
 	pci_read_config_dword(tp->pdev, TG3PCI_PCISTATE,
@@ -12812,7 +13264,8 @@
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
 
 	/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
@@ -12891,7 +13344,8 @@
 	    !(tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57780 &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765) {
 		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 ||
 		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
@@ -12926,11 +13380,6 @@
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 		tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
 
-	if ((tp->pci_chip_rev_id == CHIPREV_ID_57780_A1 &&
-	     tr32(RCVLPC_STATS_ENABLE) & RCVLPC_STATSENAB_ASF_FIX) ||
-	    tp->pci_chip_rev_id == CHIPREV_ID_57780_A0)
-		tp->tg3_flags3 |= TG3_FLG3_TOGGLE_10_100_L1PLLPD;
-
 	err = tg3_mdio_init(tp);
 	if (err)
 		return err;
@@ -13220,6 +13669,12 @@
 #endif
 #endif
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
+		val = goal ? 0 : DMA_RWCTRL_DIS_CACHE_ALIGNMENT;
+		goto out;
+	}
+
 	if (!goal)
 		goto out;
 
@@ -13414,7 +13869,7 @@
 {
 	dma_addr_t buf_dma;
 	u32 *buf, saved_dma_rwctrl;
-	int ret;
+	int ret = 0;
 
 	buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma);
 	if (!buf) {
@@ -13427,6 +13882,10 @@
 
 	tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl);
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
+		goto out;
+
 	if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) {
 		/* DMA read watermark not used on PCIE */
 		tp->dma_rwctrl |= 0x00180000;
@@ -13499,7 +13958,6 @@
 	tg3_switch_clocks(tp);
 #endif
 
-	ret = 0;
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701)
 		goto out;
@@ -13618,7 +14076,8 @@
 static void __devinit tg3_init_bufmgr_config(struct tg3 *tp)
 {
 	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS &&
-	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717) {
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717 &&
+	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_57765) {
 		tp->bufmgr_config.mbuf_read_dma_low_water =
 			DEFAULT_MB_RDMA_LOW_WATER_5705;
 		tp->bufmgr_config.mbuf_mac_rx_low_water =
@@ -13678,6 +14137,7 @@
 	case PHY_ID_BCM5756:	return "5722/5756";
 	case PHY_ID_BCM5906:	return "5906";
 	case PHY_ID_BCM5761:	return "5761";
+	case PHY_ID_BCM5717:	return "5717";
 	case PHY_ID_BCM8002:	return "8002/serdes";
 	case 0:			return "serdes";
 	default:		return "unknown";
@@ -13919,51 +14379,6 @@
 	tp->rx_pending = TG3_DEF_RX_RING_PENDING;
 	tp->rx_jumbo_pending = TG3_DEF_RX_JUMBO_RING_PENDING;
 
-	intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
-	rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
-	sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
-	for (i = 0; i < TG3_IRQ_MAX_VECS; i++) {
-		struct tg3_napi *tnapi = &tp->napi[i];
-
-		tnapi->tp = tp;
-		tnapi->tx_pending = TG3_DEF_TX_RING_PENDING;
-
-		tnapi->int_mbox = intmbx;
-		if (i < 4)
-			intmbx += 0x8;
-		else
-			intmbx += 0x4;
-
-		tnapi->consmbox = rcvmbx;
-		tnapi->prodmbox = sndmbx;
-
-		if (i)
-			tnapi->coal_now = HOSTCC_MODE_COAL_VEC1_NOW << (i - 1);
-		else
-			tnapi->coal_now = HOSTCC_MODE_NOW;
-
-		if (!(tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX))
-			break;
-
-		/*
-		 * If we support MSIX, we'll be using RSS.  If we're using
-		 * RSS, the first vector only handles link interrupts and the
-		 * remaining vectors handle rx and tx interrupts.  Reuse the
-		 * mailbox values for the next iteration.  The values we setup
-		 * above are still useful for the single vectored mode.
-		 */
-		if (!i)
-			continue;
-
-		rcvmbx += 0x8;
-
-		if (sndmbx & 0x4)
-			sndmbx -= 0x4;
-		else
-			sndmbx += 0xc;
-	}
-
-	netif_napi_add(dev, &tp->napi[0].napi, tg3_poll, 64);
 	dev->ethtool_ops = &tg3_ethtool_ops;
 	dev->watchdog_timeo = TG3_TX_TIMEOUT;
 	dev->irq = pdev->irq;
@@ -13975,8 +14390,8 @@
 		goto err_out_iounmap;
 	}
 
-	if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+	if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) &&
+	    tp->pci_chip_rev_id != CHIPREV_ID_5717_A0)
 		dev->netdev_ops = &tg3_netdev_ops;
 	else
 		dev->netdev_ops = &tg3_netdev_ops_dma_bug;
@@ -14023,46 +14438,39 @@
 
 	tg3_init_bufmgr_config(tp);
 
+	/* Selectively allow TSO based on operating conditions */
+	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
+	    (tp->fw_needed && !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)))
+		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
+	else {
+		tp->tg3_flags2 &= ~(TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG);
+		tp->fw_needed = NULL;
+	}
+
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
 		tp->fw_needed = FIRMWARE_TG3;
 
-	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
-		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
-	}
-	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
-	    tp->pci_chip_rev_id == CHIPREV_ID_5705_A0 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
-	    (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
-		tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
-	} else {
-		tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
-			tp->fw_needed = FIRMWARE_TG3TSO5;
-		else
-			tp->fw_needed = FIRMWARE_TG3TSO;
-	}
-
 	/* TSO is on by default on chips that support hardware TSO.
 	 * Firmware TSO on older chips gives lower performance, so it
 	 * is off by default, but can be enabled using ethtool.
 	 */
-	if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
-		if (dev->features & NETIF_F_IP_CSUM)
-			dev->features |= NETIF_F_TSO;
-		if ((dev->features & NETIF_F_IPV6_CSUM) &&
-		    (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2))
+	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) &&
+	    (dev->features & NETIF_F_IP_CSUM))
+		dev->features |= NETIF_F_TSO;
+
+	if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) ||
+	    (tp->tg3_flags2 & TG3_FLG2_HW_TSO_3)) {
+		if (dev->features & NETIF_F_IPV6_CSUM)
 			dev->features |= NETIF_F_TSO6;
-		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
+		if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_3) ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
 		    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
 		     GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) ||
 			GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
-		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
-		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 			dev->features |= NETIF_F_TSO_ECN;
 	}
 
-
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
 	    !(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
 	    !(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {
@@ -14074,7 +14482,7 @@
 	if (err) {
 		printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
 		       "aborting.\n");
-		goto err_out_fw;
+		goto err_out_iounmap;
 	}
 
 	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
@@ -14083,7 +14491,7 @@
 			printk(KERN_ERR PFX "Cannot map APE registers, "
 			       "aborting.\n");
 			err = -ENOMEM;
-			goto err_out_fw;
+			goto err_out_iounmap;
 		}
 
 		tg3_ape_lock_init(tp);
@@ -14113,6 +14521,53 @@
 	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;
 	tp->link_config.flowctrl = FLOW_CTRL_TX | FLOW_CTRL_RX;
 
+	intmbx = MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW;
+	rcvmbx = MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW;
+	sndmbx = MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW;
+	for (i = 0; i < TG3_IRQ_MAX_VECS; i++) {
+		struct tg3_napi *tnapi = &tp->napi[i];
+
+		tnapi->tp = tp;
+		tnapi->tx_pending = TG3_DEF_TX_RING_PENDING;
+
+		tnapi->int_mbox = intmbx;
+		if (i < 4)
+			intmbx += 0x8;
+		else
+			intmbx += 0x4;
+
+		tnapi->consmbox = rcvmbx;
+		tnapi->prodmbox = sndmbx;
+
+		if (i) {
+			tnapi->coal_now = HOSTCC_MODE_COAL_VEC1_NOW << (i - 1);
+			netif_napi_add(dev, &tnapi->napi, tg3_poll_msix, 64);
+		} else {
+			tnapi->coal_now = HOSTCC_MODE_NOW;
+			netif_napi_add(dev, &tnapi->napi, tg3_poll, 64);
+		}
+
+		if (!(tp->tg3_flags & TG3_FLAG_SUPPORT_MSIX))
+			break;
+
+		/*
+		 * If we support MSIX, we'll be using RSS.  If we're using
+		 * RSS, the first vector only handles link interrupts and the
+		 * remaining vectors handle rx and tx interrupts.  Reuse the
+		 * mailbox values for the next iteration.  The values we setup
+		 * above are still useful for the single vectored mode.
+		 */
+		if (!i)
+			continue;
+
+		rcvmbx += 0x8;
+
+		if (sndmbx & 0x4)
+			sndmbx -= 0x4;
+		else
+			sndmbx += 0xc;
+	}
+
 	tg3_init_coal(tp);
 
 	pci_set_drvdata(pdev, dev);
@@ -14131,13 +14586,14 @@
 	       tg3_bus_string(tp, str),
 	       dev->dev_addr);
 
-	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)
+	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
+		struct phy_device *phydev;
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 		printk(KERN_INFO
 		       "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-		       tp->dev->name,
-		       tp->mdio_bus->phy_map[PHY_ADDR]->drv->name,
-		       dev_name(&tp->mdio_bus->phy_map[PHY_ADDR]->dev));
-	else
+		       tp->dev->name, phydev->drv->name,
+		       dev_name(&phydev->dev));
+	} else
 		printk(KERN_INFO
 		       "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
 		       tp->dev->name, tg3_phy_string(tp),
@@ -14166,10 +14622,6 @@
 		tp->aperegs = NULL;
 	}
 
-err_out_fw:
-	if (tp->fw)
-		release_firmware(tp->fw);
-
 err_out_iounmap:
 	if (tp->regs) {
 		iounmap(tp->regs);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index bab7940..cd30889 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -46,10 +46,15 @@
 #define  TG3PCI_DEVICE_TIGON3_57788	 0x1691
 #define  TG3PCI_DEVICE_TIGON3_5785_G	 0x1699 /* GPHY */
 #define  TG3PCI_DEVICE_TIGON3_5785_F	 0x16a0 /* 10/100 only */
-#define  TG3PCI_DEVICE_TIGON3_5717C	 0x1655
-#define  TG3PCI_DEVICE_TIGON3_5717S	 0x1656
-#define  TG3PCI_DEVICE_TIGON3_5718C	 0x1665
-#define  TG3PCI_DEVICE_TIGON3_5718S	 0x1666
+#define  TG3PCI_DEVICE_TIGON3_5717	 0x1655
+#define  TG3PCI_DEVICE_TIGON3_5718	 0x1656
+#define  TG3PCI_DEVICE_TIGON3_5724	 0x165c
+#define  TG3PCI_DEVICE_TIGON3_57781	 0x16b1
+#define  TG3PCI_DEVICE_TIGON3_57785	 0x16b5
+#define  TG3PCI_DEVICE_TIGON3_57761	 0x16b0
+#define  TG3PCI_DEVICE_TIGON3_57765	 0x16b4
+#define  TG3PCI_DEVICE_TIGON3_57791	 0x16b2
+#define  TG3PCI_DEVICE_TIGON3_57795	 0x16b6
 /* 0x04 --> 0x64 unused */
 #define TG3PCI_MSI_DATA			0x00000064
 /* 0x66 --> 0x68 unused */
@@ -103,6 +108,7 @@
 #define  CHIPREV_ID_5906_A1		 0xc001
 #define  CHIPREV_ID_57780_A0		 0x57780000
 #define  CHIPREV_ID_57780_A1		 0x57780001
+#define  CHIPREV_ID_5717_A0		 0x05717000
 #define  GET_ASIC_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 12)
 #define   ASIC_REV_5700			 0x07
 #define   ASIC_REV_5701			 0x00
@@ -122,6 +128,7 @@
 #define   ASIC_REV_5785			 0x5785
 #define   ASIC_REV_57780		 0x57780
 #define   ASIC_REV_5717			 0x5717
+#define   ASIC_REV_57765		 0x57785
 #define  GET_CHIP_REV(CHIP_REV_ID)	((CHIP_REV_ID) >> 8)
 #define   CHIPREV_5700_AX		 0x70
 #define   CHIPREV_5700_BX		 0x71
@@ -141,8 +148,7 @@
 #define   METAL_REV_B1			 0x01
 #define   METAL_REV_B2			 0x02
 #define TG3PCI_DMA_RW_CTRL		0x0000006c
-#define  DMA_RWCTRL_MIN_DMA		 0x000000ff
-#define  DMA_RWCTRL_MIN_DMA_SHIFT	 0
+#define  DMA_RWCTRL_DIS_CACHE_ALIGNMENT  0x00000001
 #define  DMA_RWCTRL_READ_BNDRY_MASK	 0x00000700
 #define  DMA_RWCTRL_READ_BNDRY_DISAB	 0x00000000
 #define  DMA_RWCTRL_READ_BNDRY_16	 0x00000100
@@ -221,6 +227,7 @@
 /* 0xc0 --> 0xf4 unused */
 
 #define TG3PCI_GEN2_PRODID_ASICREV	0x000000f4
+#define TG3PCI_GEN15_PRODID_ASICREV	0x000000fc
 /* 0xf8 --> 0x200 unused */
 
 #define TG3_CORR_ERR_STAT		0x00000110
@@ -242,7 +249,11 @@
 #define MAILBOX_GENERAL_7		0x00000258 /* 64-bit */
 #define MAILBOX_RELOAD_STAT		0x00000260 /* 64-bit */
 #define MAILBOX_RCV_STD_PROD_IDX	0x00000268 /* 64-bit */
+#define TG3_RX_STD_PROD_IDX_REG		(MAILBOX_RCV_STD_PROD_IDX + \
+					 TG3_64BIT_REG_LOW)
 #define MAILBOX_RCV_JUMBO_PROD_IDX	0x00000270 /* 64-bit */
+#define TG3_RX_JMB_PROD_IDX_REG		(MAILBOX_RCV_JUMBO_PROD_IDX + \
+					 TG3_64BIT_REG_LOW)
 #define MAILBOX_RCV_MINI_PROD_IDX	0x00000278 /* 64-bit */
 #define MAILBOX_RCVRET_CON_IDX_0	0x00000280 /* 64-bit */
 #define MAILBOX_RCVRET_CON_IDX_1	0x00000288 /* 64-bit */
@@ -1264,8 +1275,9 @@
 #define  WDMAC_MODE_FIFOURUN_ENAB	 0x00000080
 #define  WDMAC_MODE_FIFOOREAD_ENAB	 0x00000100
 #define  WDMAC_MODE_LNGREAD_ENAB	 0x00000200
-#define  WDMAC_MODE_RX_ACCEL	 	 0x00000400
+#define  WDMAC_MODE_RX_ACCEL		 0x00000400
 #define  WDMAC_MODE_STATUS_TAG_FIX	 0x20000000
+#define  WDMAC_MODE_BURST_ALL_DATA	 0xc0000000
 #define WDMAC_STATUS			0x00004c04
 #define  WDMAC_STATUS_TGTABORT		 0x00000004
 #define  WDMAC_STATUS_MSTABORT		 0x00000008
@@ -1809,6 +1821,11 @@
 
 #define TG3_OTP_DEFAULT			0x286c1640
 
+
+/* Hardware Legacy NVRAM layout */
+#define TG3_NVM_VPD_OFF			0x100
+#define TG3_NVM_VPD_LEN			256
+
 /* Hardware Selfboot NVRAM layout */
 #define TG3_NVM_HWSB_CFG1		0x00000004
 #define  TG3_NVM_HWSB_CFG1_MAJMSK	0xf8000000
@@ -1953,10 +1970,34 @@
 #define  NIC_SRAM_MBUF_POOL_BASE5705	0x00010000
 #define  NIC_SRAM_MBUF_POOL_SIZE5705	0x0000e000
 
-/* Currently this is fixed. */
-#define PHY_ADDR		0x01
 
-/* Tigon3 specific PHY MII registers. */
+/* Currently this is fixed. */
+#define TG3_PHY_PCIE_ADDR		0x00
+#define TG3_PHY_MII_ADDR		0x01
+
+
+/*** Tigon3 specific PHY PCIE registers. ***/
+
+#define TG3_PCIEPHY_BLOCK_ADDR		0x1f
+#define  TG3_PCIEPHY_XGXS_BLK1		0x0801
+#define  TG3_PCIEPHY_TXB_BLK		0x0861
+#define  TG3_PCIEPHY_BLOCK_SHIFT	4
+
+/* TG3_PCIEPHY_TXB_BLK */
+#define TG3_PCIEPHY_TX0CTRL1		0x15
+#define  TG3_PCIEPHY_TX0CTRL1_TXOCM	0x0003
+#define  TG3_PCIEPHY_TX0CTRL1_RDCTL	0x0008
+#define  TG3_PCIEPHY_TX0CTRL1_TXCMV	0x0030
+#define  TG3_PCIEPHY_TX0CTRL1_TKSEL	0x0040
+#define  TG3_PCIEPHY_TX0CTRL1_NB_EN	0x0400
+
+/* TG3_PCIEPHY_XGXS_BLK1 */
+#define TG3_PCIEPHY_PWRMGMT4		0x1a
+#define TG3_PCIEPHY_PWRMGMT4_L1PLLPD_EN	0x0038
+#define TG3_PCIEPHY_PWRMGMT4_LOWPWR_EN	0x4000
+
+
+/*** Tigon3 specific PHY MII registers. ***/
 #define  TG3_BMCR_SPEED1000		0x0040
 
 #define MII_TG3_CTRL			0x09 /* 1000-baseT control register */
@@ -2055,6 +2096,9 @@
 #define MII_TG3_FET_SHDW_MISCCTRL	0x10
 #define  MII_TG3_FET_SHDW_MISCCTRL_MDIX	0x4000
 
+#define MII_TG3_FET_SHDW_AUXMODE4	0x1a
+#define MII_TG3_FET_SHDW_AUXMODE4_SBPD	0x0008
+
 #define MII_TG3_FET_SHDW_AUXSTAT2	0x1b
 #define  MII_TG3_FET_SHDW_AUXSTAT2_APD	0x0020
 
@@ -2410,10 +2454,6 @@
 	DECLARE_PCI_UNMAP_ADDR(mapping)
 };
 
-struct tx_ring_info {
-	struct sk_buff			*skb;
-};
-
 struct tg3_config_info {
 	u32				flags;
 };
@@ -2542,8 +2582,10 @@
 };
 
 struct tg3_rx_prodring_set {
-	u32				rx_std_ptr;
-	u32				rx_jmb_ptr;
+	u32				rx_std_prod_idx;
+	u32				rx_std_cons_idx;
+	u32				rx_jmb_prod_idx;
+	u32				rx_jmb_cons_idx;
 	struct tg3_rx_buffer_desc	*rx_std;
 	struct tg3_ext_rx_buffer_desc	*rx_jmb;
 	struct ring_info		*rx_std_buffers;
@@ -2571,10 +2613,11 @@
 	u32				consmbox;
 	u32				rx_rcb_ptr;
 	u16				*rx_rcb_prod_idx;
+	struct tg3_rx_prodring_set	*prodring;
 
 	struct tg3_rx_buffer_desc	*rx_rcb;
 	struct tg3_tx_buffer_desc	*tx_ring;
-	struct tx_ring_info		*tx_buffers;
+	struct ring_info		*tx_buffers;
 
 	dma_addr_t			status_mapping;
 	dma_addr_t			rx_rcb_mapping;
@@ -2654,7 +2697,7 @@
 	struct vlan_group		*vlgrp;
 #endif
 
-	struct tg3_rx_prodring_set	prodring[1];
+	struct tg3_rx_prodring_set	prodring[TG3_IRQ_MAX_VECS - 1];
 
 
 	/* begin "everything else" cacheline(s) section */
@@ -2725,7 +2768,7 @@
 #define TG3_FLG2_SERDES_PREEMPHASIS	0x00020000
 #define TG3_FLG2_5705_PLUS		0x00040000
 #define TG3_FLG2_5750_PLUS		0x00080000
-#define TG3_FLG2_PROTECTED_NVRAM	0x00100000
+#define TG3_FLG2_HW_TSO_3		0x00100000
 #define TG3_FLG2_USING_MSI		0x00200000
 #define TG3_FLG2_USING_MSIX		0x00400000
 #define TG3_FLG2_USING_MSI_OR_MSIX	(TG3_FLG2_USING_MSI | \
@@ -2737,7 +2780,9 @@
 #define TG3_FLG2_ICH_WORKAROUND		0x02000000
 #define TG3_FLG2_5780_CLASS		0x04000000
 #define TG3_FLG2_HW_TSO_2		0x08000000
-#define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
+#define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | \
+					 TG3_FLG2_HW_TSO_2 | \
+					 TG3_FLG2_HW_TSO_3)
 #define TG3_FLG2_1SHOT_MSI		0x10000000
 #define TG3_FLG2_PHY_JITTER_BUG		0x20000000
 #define TG3_FLG2_NO_FWARE_REPORTED	0x40000000
@@ -2745,6 +2790,7 @@
 	u32				tg3_flags3;
 #define TG3_FLG3_NO_NVRAM_ADDR_TRANS	0x00000001
 #define TG3_FLG3_ENABLE_APE		0x00000002
+#define TG3_FLG3_PROTECTED_NVRAM	0x00000004
 #define TG3_FLG3_5701_DMA_BUG		0x00000008
 #define TG3_FLG3_USE_PHYLIB		0x00000010
 #define TG3_FLG3_MDIOBUS_INITED		0x00000020
@@ -2756,9 +2802,13 @@
 #define TG3_FLG3_PHY_ENABLE_APD		0x00001000
 #define TG3_FLG3_5755_PLUS		0x00002000
 #define TG3_FLG3_NO_NVRAM		0x00004000
-#define TG3_FLG3_TOGGLE_10_100_L1PLLPD	0x00008000
 #define TG3_FLG3_PHY_IS_FET		0x00010000
 #define TG3_FLG3_ENABLE_RSS		0x00020000
+#define TG3_FLG3_ENABLE_TSS		0x00040000
+#define TG3_FLG3_4G_DMA_BNDRY_BUG	0x00080000
+#define TG3_FLG3_40BIT_DMA_LIMIT_BUG	0x00100000
+#define TG3_FLG3_SHORT_DMA_BUG		0x00200000
+#define TG3_FLG3_USE_JUMBO_BDFLAG	0x00400000
 
 	struct timer_list		timer;
 	u16				timer_counter;
@@ -2825,6 +2875,7 @@
 #define PHY_ID_BCM5756			0xbc050ed0
 #define PHY_ID_BCM5784			0xbc050fa0
 #define PHY_ID_BCM5761			0xbc050fd0
+#define PHY_ID_BCM5717			0x5c0d8a00
 #define PHY_ID_BCM5906			0xdc00ac40
 #define PHY_ID_BCM8002			0x60010140
 #define PHY_ID_INVALID			0xffffffff
@@ -2834,6 +2885,7 @@
 #define PHY_REV_BCM5401_C0		0x6
 #define PHY_REV_BCM5411_X0		0x1 /* Found on Netgear GA302T */
 #define TG3_PHY_ID_BCM50610		0x143bd60
+#define TG3_PHY_ID_BCM50610M	0x143bd70
 #define TG3_PHY_ID_BCMAC131		0x143bc70
 #define TG3_PHY_ID_RTL8211C		0x001cc910
 #define TG3_PHY_ID_RTL8201E		0x00008200
@@ -2846,8 +2898,9 @@
 	u32				led_ctrl;
 	u32				phy_otp;
 
-	char				board_part_number[24];
-#define TG3_VER_SIZE 32
+#define TG3_BPN_SIZE			24
+	char				board_part_number[TG3_BPN_SIZE];
+#define TG3_VER_SIZE			ETHTOOL_FWVERS_LEN
 	char				fw_ver[TG3_VER_SIZE];
 	u32				nic_sram_data_cfg;
 	u32				pci_clock_ctrl;
@@ -2865,7 +2918,7 @@
 	 (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
 	 (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
 	 (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM5761 || \
-	 (X) == PHY_ID_BCM8002)
+	 (X) == PHY_ID_BCM5717 || (X) == PHY_ID_BCM8002)
 
 	struct tg3_hw_stats		*hw_stats;
 	dma_addr_t			stats_mapping;
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3d31b47..fabaeff 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1549,7 +1549,8 @@
 		if (tmpCStat & TLAN_CSTAT_EOC)
 			eoc = 1;
 
-		new_skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
+		new_skb = netdev_alloc_skb_ip_align(dev,
+						    TLAN_MAX_FRAME_SIZE + 5);
 		if ( !new_skb )
 			goto drop_and_reuse;
 
@@ -1563,7 +1564,6 @@
 		skb->protocol = eth_type_trans( skb, dev );
 		netif_rx( skb );
 
-		skb_reserve( new_skb, NET_IP_ALIGN );
 		head_list->buffer[0].address = pci_map_single(priv->pciDev,
 							      new_skb->data,
 							      TLAN_MAX_FRAME_SIZE,
@@ -1755,8 +1755,8 @@
 			     ! ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
                 		tlphy_ctl |= TLAN_TC_SWAPOL;
                 		TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
-        		} else if ( ( tlphy_sts & TLAN_TS_POLOK )
-				    && ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
+			} else if ( ( tlphy_sts & TLAN_TS_POLOK ) &&
+				    ( tlphy_ctl & TLAN_TC_SWAPOL ) ) {
                 		tlphy_ctl &= ~TLAN_TC_SWAPOL;
                 		TLan_MiiWriteReg( dev, phy, TLAN_TLPHY_CTL, tlphy_ctl);
         		}
@@ -1967,13 +1967,12 @@
 		list->cStat = TLAN_CSTAT_READY;
 		list->frameSize = TLAN_MAX_FRAME_SIZE;
 		list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
-		skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
+		skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
 		if ( !skb ) {
 			pr_err("TLAN: out of memory for received data.\n" );
 			break;
 		}
 
-		skb_reserve( skb, NET_IP_ALIGN );
 		list->buffer[0].address = pci_map_single(priv->pciDev,
 							 skb->data,
 							 TLAN_MAX_FRAME_SIZE,
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 7241589..cf552d1 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -610,9 +610,8 @@
 
 	u16 switchsettings, switchsettings_eeprom  ;
  
-	if(request_irq(dev->irq, &xl_interrupt, IRQF_SHARED , "3c359", dev)) {
+	if (request_irq(dev->irq, xl_interrupt, IRQF_SHARED , "3c359", dev))
 		return -EAGAIN;
-	}
 
 	/* 
 	 * Read the information from the EEPROM that we need.
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 75fa32e..5db0270 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -680,7 +680,7 @@
 
 	/* The PCMCIA has already got the interrupt line and the io port, 
 	   so no chance of anybody else getting it - MLP */
-	if (request_irq(dev->irq = irq, &tok_interrupt, 0, "ibmtr", dev) != 0) {
+	if (request_irq(dev->irq = irq, tok_interrupt, 0, "ibmtr", dev) != 0) {
 		DPRINTK("Could not grab irq %d.  Halting Token Ring driver.\n",
 					irq);
 		iounmap(t_mmio);
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 26dca2b..d6ccd59 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -596,7 +596,7 @@
 	        rc=streamer_reset(dev);
 	}
 
-	if (request_irq(dev->irq, &streamer_interrupt, IRQF_SHARED, "lanstreamer", dev)) {
+	if (request_irq(dev->irq, streamer_interrupt, IRQF_SHARED, "lanstreamer", dev)) {
 		return -EAGAIN;
 	}
 #if STREAMER_DEBUG
@@ -712,8 +712,8 @@
 					strcat(open_error, " - ");
 					strcat(open_error, open_min_error[(error_code & 0x0f)]);
 
-					if (!streamer_priv->streamer_ring_speed
-					    && ((error_code & 0x0f) == 0x0d)) 
+					if (!streamer_priv->streamer_ring_speed &&
+					    ((error_code & 0x0f) == 0x0d))
 					{
 						printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n", dev->name);
 						printk(KERN_WARNING "%s: Please try again with a specified ring speed \n", dev->name);
@@ -1032,8 +1032,8 @@
 	sisr = readw(streamer_mmio + SISR);
 
 	while((sisr & (SISR_MI | SISR_SRB_REPLY | SISR_ADAPTER_CHECK | SISR_ASB_FREE | 
-		       SISR_ARB_CMD | SISR_TRB_REPLY | SISR_PAR_ERR | SISR_SERR_ERR))
-               && (max_intr > 0)) {
+		       SISR_ARB_CMD | SISR_TRB_REPLY | SISR_PAR_ERR | SISR_SERR_ERR)) &&
+	      (max_intr > 0)) {
 
 		if(sisr & SISR_PAR_ERR) {
 			writew(~SISR_PAR_ERR, streamer_mmio + SISR_RUM);
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index d9ec7f0..df32025 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -445,9 +445,9 @@
 
 	olympic_init(dev);
 
-	if(request_irq(dev->irq, &olympic_interrupt, IRQF_SHARED , "olympic", dev)) {
+	if (request_irq(dev->irq, olympic_interrupt, IRQF_SHARED , "olympic",
+			dev))
 		return -EAGAIN;
-	}
 
 #if OLYMPIC_DEBUG
 	printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM));
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index ebda61bc4..427a8970 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -2309,9 +2309,9 @@
                                 else
                                 {
                                         if((tp->acb_head->cmd
-                                                == ACB_CMD_READ_TRC_STATUS)
-                                                && (tp->acb_head->subcmd
-                                                == RW_TRC_STATUS_BLOCK))
+					    == ACB_CMD_READ_TRC_STATUS) &&
+					   (tp->acb_head->subcmd
+					    == RW_TRC_STATUS_BLOCK))
                                         {
                                                 if(tp->ptr_bcn_type)
                                                 {
@@ -2331,8 +2331,8 @@
                                                         smctr_disable_16bit(dev);
                                                         err = smctr_ring_status_chg(dev);
                                                         smctr_enable_16bit(dev);
-                                                        if((tp->ring_status & REMOVE_RECEIVED)
-                                                                && (tp->config_word0 & NO_AUTOREMOVE))
+                                                        if((tp->ring_status & REMOVE_RECEIVED) &&
+							   (tp->config_word0 & NO_AUTOREMOVE))
                                                         {
                                                                 smctr_issue_remove_cmd(dev);
                                                         }
@@ -2511,9 +2511,9 @@
         tp->config_word0 = THDREN | DMA_TRIGGER | USETPT | NO_AUTOREMOVE;
         tp->config_word1 = 0;
 
-        if((tp->media_type == MEDIA_STP_16)
-                || (tp->media_type == MEDIA_UTP_16)
-                || (tp->media_type == MEDIA_STP_16_UTP_16))
+        if((tp->media_type == MEDIA_STP_16) ||
+	   (tp->media_type == MEDIA_UTP_16) ||
+	   (tp->media_type == MEDIA_STP_16_UTP_16))
         {
                 tp->config_word0 |= FREQ_16MB_BIT;
         }
@@ -2556,9 +2556,9 @@
                         tp->config_word1 &= ~SOURCE_ROUTING_SPANNING_BITS;
         }
 
-        if((tp->media_type == MEDIA_STP_16)
-                || (tp->media_type == MEDIA_UTP_16)
-                || (tp->media_type == MEDIA_STP_16_UTP_16))
+        if((tp->media_type == MEDIA_STP_16) ||
+	   (tp->media_type == MEDIA_UTP_16) ||
+	   (tp->media_type == MEDIA_STP_16_UTP_16))
         {
                 tp->config_word1 |= INTERFRAME_SPACING_16;
         }
@@ -2568,9 +2568,9 @@
         *pTimer_Struc++ = tp->config_word0;
         *pTimer_Struc++ = tp->config_word1;
 
-        if((tp->media_type == MEDIA_STP_4)
-                || (tp->media_type == MEDIA_UTP_4)
-                || (tp->media_type == MEDIA_STP_4_UTP_4))
+        if((tp->media_type == MEDIA_STP_4) ||
+	   (tp->media_type == MEDIA_UTP_4) ||
+	   (tp->media_type == MEDIA_STP_4_UTP_4))
         {
                 *pTimer_Struc++ = 0x00FA;       /* prescale */
                 *pTimer_Struc++ = 0x2710;       /* TPT_limit */
@@ -2990,8 +2990,8 @@
 	}
 
         /* Verify the firmware exists and is there in the right amount. */
-        if (!fw->data
-                || (*(fw->data + UCODE_VERSION_OFFSET) < UCODE_VERSION))
+        if (!fw->data ||
+	    (*(fw->data + UCODE_VERSION_OFFSET) < UCODE_VERSION))
         {
                 err = (UCODE_NOT_PRESENT);
 		goto out;
@@ -3010,9 +3010,8 @@
         smctr_enable_16bit(dev);
         smctr_set_page(dev, (__u8 *)tp->ram_access);
 
-        if((smctr_checksum_firmware(dev))
-                || (*(fw->data + UCODE_VERSION_OFFSET)
-                > tp->microcode_version))
+        if((smctr_checksum_firmware(dev)) ||
+	   (*(fw->data + UCODE_VERSION_OFFSET) > tp->microcode_version))
         {
                 smctr_enable_adapter_ctrl_store(dev);
 
@@ -3117,9 +3116,9 @@
         }
 
         /* Check if any frames received during test. */
-        if((tp->rx_fcb_curr[MAC_QUEUE]->frame_status)
-                || (tp->rx_fcb_curr[NON_MAC_QUEUE]->frame_status))
-			goto err;
+        if((tp->rx_fcb_curr[MAC_QUEUE]->frame_status) ||
+	   (tp->rx_fcb_curr[NON_MAC_QUEUE]->frame_status))
+		goto err;
 
         /* Set receive mask to "Promisc" mode. */
         tp->receive_mask = saved_rcv_mask;
@@ -3303,8 +3302,8 @@
         /* Set Group Address Sub-vector to all zeros if only the
          * Group Address/Functional Address Indicator is set.
          */
-        if(tsv->svv[0] == 0x80 && tsv->svv[1] == 0x00
-        	&& tsv->svv[2] == 0x00 && tsv->svv[3] == 0x00)
+        if(tsv->svv[0] == 0x80 && tsv->svv[1] == 0x00 &&
+	   tsv->svv[2] == 0x00 && tsv->svv[3] == 0x00)
                 tsv->svv[0] = 0x00;
 
         return (0);
@@ -3876,10 +3875,10 @@
         /* NOTE: UNKNOWN MAC frames will NOT be passed up unless
          * ACCEPT_ATT_MAC_FRAMES is set.
          */
-        if(((tp->receive_mask & ACCEPT_ATT_MAC_FRAMES)
-                && (xframe == (__u8)0))
-                || ((tp->receive_mask & ACCEPT_EXT_MAC_FRAMES)
-                && (xframe == (__u8)1)))
+        if(((tp->receive_mask & ACCEPT_ATT_MAC_FRAMES) &&
+	    (xframe == (__u8)0)) ||
+	   ((tp->receive_mask & ACCEPT_EXT_MAC_FRAMES) &&
+	    (xframe == (__u8)1)))
         {
                 rmf->vl = SWAP_BYTES(rmf->vl);
 
@@ -3934,8 +3933,8 @@
 
                 word_pattern = start_pattern;
 
-                for(j = 1; j < (__u32)(tp->ram_usable * 1024) - 1
-                        && (~err); j += 2, word_pattern++)
+                for(j = 1; j < (__u32)(tp->ram_usable * 1024) - 1 && (~err);
+		    j += 2, word_pattern++)
                 {
                         word_read = *(__u16 *)(pword + j);
                         if(word_read != word_pattern)
@@ -3959,8 +3958,7 @@
                 for(j = 0; j < (__u32)tp->ram_usable * 1024; j +=2)
                         *(__u16 *)(pword + j) = word_pattern;
 
-                for(j =0; j < (__u32)tp->ram_usable * 1024
-                        && (~err); j += 2)
+                for(j =0; j < (__u32)tp->ram_usable * 1024 && (~err); j += 2)
                 {
                         word_read = *(__u16 *)(pword + j);
                         if(word_read != word_pattern)
@@ -4325,8 +4323,8 @@
         if(smctr_debug > 10)
                 printk(KERN_DEBUG "%s: smctr_restart_tx_chain\n", dev->name);
 
-        if(tp->num_tx_fcbs_used[queue] != 0
-                && tp->tx_queue_status[queue] == NOT_TRANSMITING)
+        if(tp->num_tx_fcbs_used[queue] != 0 &&
+	   tp->tx_queue_status[queue] == NOT_TRANSMITING)
         {
                 tp->tx_queue_status[queue] = TRANSMITING;
                 err = smctr_issue_resume_tx_fcb_cmd(dev, queue);
@@ -4349,8 +4347,8 @@
          */
         if(tp->ring_status_flags == MONITOR_STATE_CHANGED)
         {
-                if((tp->monitor_state == MS_ACTIVE_MONITOR_STATE)
-                        || (tp->monitor_state == MS_STANDBY_MONITOR_STATE))
+                if((tp->monitor_state == MS_ACTIVE_MONITOR_STATE) ||
+		   (tp->monitor_state == MS_STANDBY_MONITOR_STATE))
                 {
                         tp->monitor_state_ready = 1;
                 }
@@ -4363,8 +4361,8 @@
                         tp->monitor_state_ready = 0;
 
 			/* Ring speed problem, switching to auto mode. */
-			if(tp->monitor_state == MS_MONITOR_FSM_INACTIVE
-				&& !tp->cleanup)
+			if(tp->monitor_state == MS_MONITOR_FSM_INACTIVE &&
+			   !tp->cleanup)
 			{
 				printk(KERN_INFO "%s: Incorrect ring speed switching.\n",
 					dev->name);
@@ -4442,8 +4440,8 @@
         {
                 err = HARDWARE_FAILED;
 
-                if(((status & 0x007f) == 0)
-                        || ((tp->receive_mask & ACCEPT_ERR_PACKETS) != 0))
+                if(((status & 0x007f) == 0) ||
+		   ((tp->receive_mask & ACCEPT_ERR_PACKETS) != 0))
                 {
                         /* frame length less the CRC (4 bytes) + FS (1 byte) */
                         rx_size = tp->rx_fcb_curr[queue]->frame_length - 5;
@@ -4538,8 +4536,8 @@
         }
 
         /* Check if GOOD frame Tx'ed. */
-        if(!(fcb->frame_status &  FCB_COMMAND_DONE)
-                || fcb->frame_status & (FCB_TX_STATUS_E | FCB_TX_AC_BITS))
+        if(!(fcb->frame_status &  FCB_COMMAND_DONE) ||
+	   fcb->frame_status & (FCB_TX_STATUS_E | FCB_TX_AC_BITS))
         {
                 return (INITIALIZE_FAILED);
         }
@@ -4653,8 +4651,8 @@
         }
 
         /* Check if GOOD frame Tx'ed */
-        if(!(fcb->frame_status & FCB_COMMAND_DONE)
-                || fcb->frame_status & (FCB_TX_STATUS_E | FCB_TX_AC_BITS))
+        if(!(fcb->frame_status & FCB_COMMAND_DONE) ||
+	   fcb->frame_status & (FCB_TX_STATUS_E | FCB_TX_AC_BITS))
         {
                 return (LOBE_MEDIA_TEST_FAILED);
         }
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index a7b6888..e3c42f5 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -729,8 +729,8 @@
 		return;
 
 	tms380tr_chk_outstanding_cmds(dev);
-	if(time_before(tp->LastSendTime + SEND_TIMEOUT, jiffies)
-		&& (tp->TplFree != tp->TplBusy))
+	if(time_before(tp->LastSendTime + SEND_TIMEOUT, jiffies) &&
+	   (tp->TplFree != tp->TplBusy))
 	{
 		/* Anything to send, but stalled too long */
 		tp->LastSendTime = jiffies;
@@ -830,8 +830,8 @@
 		}
 
 		/* Reset system interrupt if not already done. */
-		if(irq_type != STS_IRQ_TRANSMIT_STATUS
-			&& irq_type != STS_IRQ_RECEIVE_STATUS) {
+		if(irq_type != STS_IRQ_TRANSMIT_STATUS &&
+		   irq_type != STS_IRQ_RECEIVE_STATUS) {
 			tms380tr_reset_interrupt(dev);
 		}
 
@@ -895,10 +895,10 @@
 
 	/* Check if this interrupt does use the SSB. */
 
-	if(IrqType != STS_IRQ_TRANSMIT_STATUS
-		&& IrqType != STS_IRQ_RECEIVE_STATUS
-		&& IrqType != STS_IRQ_COMMAND_STATUS
-		&& IrqType != STS_IRQ_RING_STATUS)
+	if(IrqType != STS_IRQ_TRANSMIT_STATUS &&
+	   IrqType != STS_IRQ_RECEIVE_STATUS &&
+	   IrqType != STS_IRQ_COMMAND_STATUS &&
+	   IrqType != STS_IRQ_RING_STATUS)
 	{
 		return (1);	/* SSB not involved. */
 	}
@@ -1364,6 +1364,8 @@
 	return (-1);
 }
 
+MODULE_FIRMWARE("tms380tr.bin");
+
 /*
  * Starts bring up diagnostics of token ring adapter and evaluates
  * diagnostic results.
@@ -1483,8 +1485,8 @@
 			/* Mask interesting status bits */
 			Status = SIFREADW(SIFSTS);
 			Status &= STS_MASK;
-		} while(((Status &(STS_INITIALIZE | STS_ERROR | STS_TEST)) != 0)
-			&& ((Status & STS_ERROR) == 0) && (loop_cnt != 0));
+		} while(((Status &(STS_INITIALIZE | STS_ERROR | STS_TEST)) != 0) &&
+			((Status & STS_ERROR) == 0) && (loop_cnt != 0));
 
 		if((Status & (STS_INITIALIZE | STS_ERROR | STS_TEST)) == 0)
 		{
@@ -2181,8 +2183,8 @@
 				}
 			}
 
-			if(skb && (rpl->SkbStat == SKB_DATA_COPY
-				|| rpl->SkbStat == SKB_DMA_DIRECT))
+			if(skb && (rpl->SkbStat == SKB_DATA_COPY ||
+				   rpl->SkbStat == SKB_DMA_DIRECT))
 			{
 				if(rpl->SkbStat == SKB_DATA_COPY)
 					skb_copy_to_linear_data(skb, ReceiveDataPtr,
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 7030bd5..a69c4a4 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -802,13 +802,11 @@
 		int rx = data->rxhead;
 		struct sk_buff *skb;
 
-		data->rxskbs[rx] = skb = netdev_alloc_skb(dev,
-							  TSI108_RXBUF_SIZE + 2);
+		skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE);
+		data->rxskbs[rx] = skb;
 		if (!skb)
 			break;
 
-		skb_reserve(skb, 2); /* Align the data on a 4-byte boundary. */
-
 		data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
 							TSI108_RX_SKB_SIZE,
 							DMA_FROM_DEVICE);
@@ -1356,7 +1354,7 @@
 	for (i = 0; i < TSI108_RXRING_LEN; i++) {
 		struct sk_buff *skb;
 
-		skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE);
 		if (!skb) {
 			/* Bah.  No memory for now, but maybe we'll get
 			 * some more later.
@@ -1370,8 +1368,6 @@
 		}
 
 		data->rxskbs[i] = skb;
-		/* Align the payload on a 4-byte boundary */
-		skb_reserve(skb, 2);
 		data->rxskbs[i] = skb;
 		data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data);
 		data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT;
diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c
index db7d5e1..9f6742f 100644
--- a/drivers/net/tulip/21142.c
+++ b/drivers/net/tulip/21142.c
@@ -209,10 +209,10 @@
 			printk(KERN_DEBUG "%s:  Setting CSR6 %8.8x/%x CSR12 %8.8x.\n",
 				   dev->name, tp->csr6, ioread32(ioaddr + CSR6),
 				   ioread32(ioaddr + CSR12));
-	} else if ((tp->nwayset  &&  (csr5 & 0x08000000)
-				&& (dev->if_port == 3  ||  dev->if_port == 5)
-				&& (csr12 & 2) == 2) ||
-			   (tp->nway && (csr5 & (TPLnkFail)))) {
+	} else if ((tp->nwayset  &&  (csr5 & 0x08000000) &&
+		    (dev->if_port == 3  ||  dev->if_port == 5) &&
+		    (csr12 & 2) == 2) ||
+		   (tp->nway && (csr5 & (TPLnkFail)))) {
 		/* Link blew? Maybe restart NWay. */
 		del_timer_sync(&tp->timer);
 		t21142_start_nway(dev);
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index 74e5ba4..d4255d4 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -62,9 +62,9 @@
 MODULE_PARM_DESC (debug, "de2104x bitmapped message enable number");
 
 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
-#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-        || defined(CONFIG_SPARC) || defined(__ia64__) \
-        || defined(__sh__) || defined(__mips__)
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+        defined(CONFIG_SPARC) || defined(__ia64__) ||		   \
+        defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
 static int rx_copybreak = 100;
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index a45ded0..ad63621 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -543,7 +543,7 @@
 
 	DMFE_DBUG(0, "dmfe_open", 0);
 
-	ret = request_irq(dev->irq, &dmfe_interrupt,
+	ret = request_irq(dev->irq, dmfe_interrupt,
 			  IRQF_SHARED, dev->name, dev);
 	if (ret)
 		return ret;
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 391acd3..889f57a 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -174,10 +174,10 @@
 		}
 	  /* Do a fix-up based on the vendor half of the station address prefix. */
 	  for (i = 0; eeprom_fixups[i].name; i++) {
-		if (dev->dev_addr[0] == eeprom_fixups[i].addr0
-			&&  dev->dev_addr[1] == eeprom_fixups[i].addr1
-			&&  dev->dev_addr[2] == eeprom_fixups[i].addr2) {
-		  if (dev->dev_addr[2] == 0xE8  &&  ee_data[0x1a] == 0x55)
+		  if (dev->dev_addr[0] == eeprom_fixups[i].addr0 &&
+		      dev->dev_addr[1] == eeprom_fixups[i].addr1 &&
+		      dev->dev_addr[2] == eeprom_fixups[i].addr2) {
+		  if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55)
 			  i++;			/* An Accton EN1207, not an outlaw Maxtech. */
 		  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
 				 sizeof(eeprom_fixups[i].newtable));
diff --git a/drivers/net/tulip/interrupt.c b/drivers/net/tulip/interrupt.c
index c8d220c..2e8e8ee 100644
--- a/drivers/net/tulip/interrupt.c
+++ b/drivers/net/tulip/interrupt.c
@@ -170,8 +170,8 @@
 				      RxDescCollisionSeen |
 				      RxDescRunt |
 				      RxDescDescErr |
-				      RxWholePkt)) != RxWholePkt
-			   || pkt_len > 1518) {
+				      RxWholePkt)) != RxWholePkt ||
+			   pkt_len > 1518) {
 			       if ((status & (RxLengthOver2047 |
 					      RxWholePkt)) != RxWholePkt) {
                                 /* Ingore earlier buffers. */
@@ -201,8 +201,8 @@
 
                                /* Check if the packet is long enough to accept without copying
                                   to a minimally-sized skbuff. */
-                               if (pkt_len < tulip_rx_copybreak
-                                   && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+                               if (pkt_len < tulip_rx_copybreak &&
+                                   (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
                                        skb_reserve(skb, 2);    /* 16 byte align the IP header */
                                        pci_dma_sync_single_for_cpu(tp->pdev,
 								   tp->rx_buffers[entry].mapping,
@@ -395,8 +395,8 @@
 			       RxDescCollisionSeen |
 			       RxDescRunt |
 			       RxDescDescErr |
-			       RxWholePkt))        != RxWholePkt
-		     || pkt_len > 1518) {
+			       RxWholePkt))        != RxWholePkt ||
+		    pkt_len > 1518) {
 			if ((status & (RxLengthOver2047 |
 			     RxWholePkt))         != RxWholePkt) {
 				/* Ingore earlier buffers. */
@@ -425,8 +425,8 @@
 
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
-			if (pkt_len < tulip_rx_copybreak
-				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+			if (pkt_len < tulip_rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 				pci_dma_sync_single_for_cpu(tp->pdev,
 							    tp->rx_buffers[entry].mapping,
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index daddfa5..d8fda83 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -468,8 +468,8 @@
 		int phy = phyn & 0x1f;
 		int mii_status = tulip_mdio_read (dev, phy, MII_BMSR);
 		if ((mii_status & 0x8301) == 0x8001 ||
-		    ((mii_status & BMSR_100BASE4) == 0
-		     && (mii_status & 0x7800) != 0)) {
+		    ((mii_status & BMSR_100BASE4) == 0 &&
+		     (mii_status & 0x7800) != 0)) {
 			/* preserve Becker logic, gain indentation level */
 		} else {
 			continue;
diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c
index f495791..d841869 100644
--- a/drivers/net/tulip/pnic2.c
+++ b/drivers/net/tulip/pnic2.c
@@ -316,9 +316,9 @@
 		}
 	}
 
-	if ((tp->nwayset  &&  (csr5 & 0x08000000)
-			  && (dev->if_port == 3  ||  dev->if_port == 5)
-			  && (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) {
+	if ((tp->nwayset  &&  (csr5 & 0x08000000) &&
+	     (dev->if_port == 3  ||  dev->if_port == 5) &&
+	     (csr12 & 2) == 2) || (tp->nway && (csr5 & (TPLnkFail)))) {
 
 		/* Link blew? Maybe restart NWay. */
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 6b2330e..0fa3140 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -64,9 +64,9 @@
 };
 
 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
-#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-	|| defined(CONFIG_SPARC) || defined(__ia64__) \
-	|| defined(__sh__) || defined(__mips__)
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+	defined(CONFIG_SPARC) || defined(__ia64__) || \
+	defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
 static int rx_copybreak = 100;
@@ -449,8 +449,8 @@
 			iowrite32(0x0201B078, ioaddr + 0xB8);
 			next_tick = 1*HZ;
 		}
-	} else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881)
-			   && ! tp->medialock) {
+	} else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) &&
+		   ! tp->medialock) {
 		dev->if_port = 0;
 		tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0);
 		iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
@@ -506,7 +506,7 @@
 
 	tulip_init_ring (dev);
 
-	retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev);
+	retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev);
 	if (retval)
 		goto free_ring;
 
@@ -535,9 +535,9 @@
 		if (tulip_debug > 1)
 			printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
 				   dev->name);
-	} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
-			   || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
-			   || tp->chip_id == DM910X) {
+	} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
+		   tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
+		   tp->chip_id == DM910X) {
 		printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
 			   "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
 			   dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
@@ -1538,8 +1538,10 @@
 		}
 	}
 	/* Lite-On boards have the address byte-swapped. */
-	if ((dev->dev_addr[0] == 0xA0  ||  dev->dev_addr[0] == 0xC0 || dev->dev_addr[0] == 0x02)
-		&&  dev->dev_addr[1] == 0x00)
+	if ((dev->dev_addr[0] == 0xA0 ||
+	     dev->dev_addr[0] == 0xC0 ||
+	     dev->dev_addr[0] == 0x02) &&
+	    dev->dev_addr[1] == 0x00)
 		for (i = 0; i < 6; i+=2) {
 			char tmp = dev->dev_addr[i];
 			dev->dev_addr[i] = dev->dev_addr[i+1];
@@ -1782,7 +1784,7 @@
 		return retval;
 	}
 
-	if ((retval = request_irq(dev->irq, &tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
+	if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
 		printk (KERN_ERR "tulip: request_irq failed in resume\n");
 		return retval;
 	}
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index c457a0ca5..fa019ca 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -461,7 +461,7 @@
 	/* Initialize ULI526X board */
 	uli526x_init(dev);
 
-	ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
+	ret = request_irq(dev->irq, uli526x_interrupt, IRQF_SHARED, dev->name, dev);
 	if (ret)
 		return ret;
 
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index b38d3b7..869a7a0 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -639,7 +639,7 @@
 	iowrite32(0x00000001, ioaddr + PCIBusCfg);		/* Reset */
 
 	netif_device_detach(dev);
-	i = request_irq(dev->irq, &intr_handler, IRQF_SHARED, dev->name, dev);
+	i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev);
 	if (i)
 		goto out_err;
 
@@ -1230,8 +1230,8 @@
 #endif
 			/* Check if the packet is long enough to accept without copying
 			   to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak
-				&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+			if (pkt_len < rx_copybreak &&
+			    (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
 				skb_reserve(skb, 2);	/* 16 byte align the IP header */
 				pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
 							    np->rx_skbuff[entry]->len,
@@ -1357,8 +1357,8 @@
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = RxAcceptBroadcast | AcceptMulticast | RxAcceptAllPhys
 			| AcceptMyPhys;
-	} else if ((dev->mc_count > multicast_filter_limit)
-			   ||  (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		memset(mc_filter, 0xff, sizeof(mc_filter));
 		rx_mode = RxAcceptBroadcast | AcceptMulticast | AcceptMyPhys;
diff --git a/drivers/net/tulip/xircom_cb.c b/drivers/net/tulip/xircom_cb.c
index 0f2ca598..9924c4c 100644
--- a/drivers/net/tulip/xircom_cb.c
+++ b/drivers/net/tulip/xircom_cb.c
@@ -458,7 +458,7 @@
 	int retval;
 	enter("xircom_open");
 	printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
-	retval = request_irq(dev->irq, &xircom_interrupt, IRQF_SHARED, dev->name, dev);
+	retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
 	if (retval) {
 		leave("xircom_open - No IRQ");
 		return retval;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 4fdfa2a..01e99f2 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -44,7 +44,6 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/fcntl.h>
 #include <linux/init.h>
@@ -54,6 +53,7 @@
 #include <linux/miscdevice.h>
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
+#include <linux/compat.h>
 #include <linux/if.h>
 #include <linux/if_arp.h>
 #include <linux/if_ether.h>
@@ -1110,8 +1110,8 @@
 	return 0;
 }
 
-static long tun_chr_ioctl(struct file *file, unsigned int cmd,
-			  unsigned long arg)
+static long __tun_chr_ioctl(struct file *file, unsigned int cmd,
+			    unsigned long arg, int ifreq_len)
 {
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun;
@@ -1121,7 +1121,7 @@
 	int ret;
 
 	if (cmd == TUNSETIFF || _IOC_TYPE(cmd) == 0x89)
-		if (copy_from_user(&ifr, argp, sizeof ifr))
+		if (copy_from_user(&ifr, argp, ifreq_len))
 			return -EFAULT;
 
 	if (cmd == TUNGETFEATURES) {
@@ -1144,7 +1144,7 @@
 		if (ret)
 			goto unlock;
 
-		if (copy_to_user(argp, &ifr, sizeof(ifr)))
+		if (copy_to_user(argp, &ifr, ifreq_len))
 			ret = -EFAULT;
 		goto unlock;
 	}
@@ -1162,7 +1162,7 @@
 		if (ret)
 			break;
 
-		if (copy_to_user(argp, &ifr, sizeof(ifr)))
+		if (copy_to_user(argp, &ifr, ifreq_len))
 			ret = -EFAULT;
 		break;
 
@@ -1236,7 +1236,7 @@
 		/* Get hw addres */
 		memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
 		ifr.ifr_hwaddr.sa_family = tun->dev->type;
-		if (copy_to_user(argp, &ifr, sizeof ifr))
+		if (copy_to_user(argp, &ifr, ifreq_len))
 			ret = -EFAULT;
 		break;
 
@@ -1275,6 +1275,41 @@
 	return ret;
 }
 
+static long tun_chr_ioctl(struct file *file,
+			  unsigned int cmd, unsigned long arg)
+{
+	return __tun_chr_ioctl(file, cmd, arg, sizeof (struct ifreq));
+}
+
+#ifdef CONFIG_COMPAT
+static long tun_chr_compat_ioctl(struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case TUNSETIFF:
+	case TUNGETIFF:
+	case TUNSETTXFILTER:
+	case TUNGETSNDBUF:
+	case TUNSETSNDBUF:
+	case SIOCGIFHWADDR:
+	case SIOCSIFHWADDR:
+		arg = (unsigned long)compat_ptr(arg);
+		break;
+	default:
+		arg = (compat_ulong_t)arg;
+		break;
+	}
+
+	/*
+	 * compat_ifreq is shorter than ifreq, so we must not access beyond
+	 * the end of that structure. All fields that are used in this
+	 * driver are compatible though, we don't need to convert the
+	 * contents.
+	 */
+	return __tun_chr_ioctl(file, cmd, arg, sizeof(struct compat_ifreq));
+}
+#endif /* CONFIG_COMPAT */
+
 static int tun_chr_fasync(int fd, struct file *file, int on)
 {
 	struct tun_struct *tun = tun_get(file);
@@ -1285,7 +1320,6 @@
 
 	DBG(KERN_INFO "%s: tun_chr_fasync %d\n", tun->dev->name, on);
 
-	lock_kernel();
 	if ((ret = fasync_helper(fd, file, on, &tun->fasync)) < 0)
 		goto out;
 
@@ -1298,7 +1332,6 @@
 		tun->flags &= ~TUN_FASYNC;
 	ret = 0;
 out:
-	unlock_kernel();
 	tun_put(tun);
 	return ret;
 }
@@ -1306,7 +1339,7 @@
 static int tun_chr_open(struct inode *inode, struct file * file)
 {
 	struct tun_file *tfile;
-	cycle_kernel_lock();
+
 	DBG1(KERN_INFO "tunX: tun_chr_open\n");
 
 	tfile = kmalloc(sizeof(*tfile), GFP_KERNEL);
@@ -1359,7 +1392,10 @@
 	.write = do_sync_write,
 	.aio_write = tun_chr_aio_write,
 	.poll	= tun_chr_poll,
-	.unlocked_ioctl = tun_chr_ioctl,
+	.unlocked_ioctl	= tun_chr_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = tun_chr_compat_ioctl,
+#endif
 	.open	= tun_chr_open,
 	.release = tun_chr_close,
 	.fasync = tun_chr_fasync
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 5921f5b..39f1fc6 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -1769,8 +1769,8 @@
 		csum_bits = rx->rxStatus & (TYPHOON_RX_IP_CHK_GOOD |
 			TYPHOON_RX_UDP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD);
 		if(csum_bits ==
-		   (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD)
-		   || csum_bits ==
+		   (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD) ||
+		   csum_bits ==
 		   (TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_UDP_CHK_GOOD)) {
 			new_skb->ip_summed = CHECKSUM_UNNECESSARY;
 		} else
@@ -2151,7 +2151,7 @@
 		goto out_sleep;
 	}
 
-	err = request_irq(dev->irq, &typhoon_interrupt, IRQF_SHARED,
+	err = request_irq(dev->irq, typhoon_interrupt, IRQF_SHARED,
 				dev->name, dev);
 	if(err < 0)
 		goto out_sleep;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 4469f24..9f44c99 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1306,8 +1306,8 @@
 				u16 __iomem *mrblr_register)
 {
 	/* max_rx_buf_len value must be a multiple of 128 */
-	if ((max_rx_buf_len == 0)
-	    || (max_rx_buf_len % UCC_GETH_MRBLR_ALIGNMENT))
+	if ((max_rx_buf_len == 0) ||
+	    (max_rx_buf_len % UCC_GETH_MRBLR_ALIGNMENT))
 		return -EINVAL;
 
 	out_be16(mrblr_register, max_rx_buf_len);
@@ -2159,8 +2159,8 @@
 	}
 
 	if ((ug_info->numStationAddresses !=
-	     UCC_GETH_NUM_OF_STATION_ADDRESSES_1)
-	    && ug_info->rxExtendedFiltering) {
+	     UCC_GETH_NUM_OF_STATION_ADDRESSES_1) &&
+	    ug_info->rxExtendedFiltering) {
 		if (netif_msg_probe(ugeth))
 			ugeth_err("%s: Number of station addresses greater than 1 "
 				  "not allowed in extended parsing mode.",
@@ -2284,9 +2284,9 @@
 	     UCC_GETH_NUM_OF_STATION_ADDRESSES_1);
 
 	ugeth->rx_extended_features = ugeth->rx_non_dynamic_extended_features ||
-	    (ug_info->vlanOperationTagged != UCC_GETH_VLAN_OPERATION_TAGGED_NOP)
-	    || (ug_info->vlanOperationNonTagged !=
-		UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP);
+		(ug_info->vlanOperationTagged != UCC_GETH_VLAN_OPERATION_TAGGED_NOP) ||
+		(ug_info->vlanOperationNonTagged !=
+		 UCC_GETH_VLAN_OPERATION_NON_TAGGED_NOP);
 
 	init_default_reg_vals(&uf_regs->upsmr,
 			      &ug_regs->maccfg1, &ug_regs->maccfg2);
@@ -2987,11 +2987,11 @@
 	ugeth->p_init_enet_param_shadow->rgftgfrxglobal |=
 	    ugeth->rx_glbl_pram_offset | ug_info->riscRx;
 	if ((ug_info->largestexternallookupkeysize !=
-	     QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE)
-	    && (ug_info->largestexternallookupkeysize !=
-		QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES)
-	    && (ug_info->largestexternallookupkeysize !=
-		QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES)) {
+	     QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE) &&
+	    (ug_info->largestexternallookupkeysize !=
+	     QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES) &&
+	    (ug_info->largestexternallookupkeysize !=
+	     QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES)) {
 		if (netif_msg_ifup(ugeth))
 			ugeth_err("%s: Invalid largest External Lookup Key Size.",
 				  __func__);
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index 6ce7f77..a516185 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -365,8 +365,8 @@
 
 	padlen = ((skb->len + 4) % 512) ? 0 : 4;
 
-	if ((!skb_cloned(skb))
-	    && ((headroom + tailroom) >= (4 + padlen))) {
+	if ((!skb_cloned(skb)) &&
+	    ((headroom + tailroom) >= (4 + padlen))) {
 		if ((headroom < 4) || (tailroom < padlen)) {
 			skb->data = memmove(skb->head + 4, skb->data, skb->len);
 			skb_set_tail_pointer(skb, skb->len);
@@ -541,8 +541,8 @@
 
 	if (net->flags & IFF_PROMISC) {
 		rx_ctl |= AX_RX_CTL_PRO;
-	} else if (net->flags & IFF_ALLMULTI
-		   || net->mc_count > AX_MAX_MCAST) {
+	} else if (net->flags & IFF_ALLMULTI ||
+		   net->mc_count > AX_MAX_MCAST) {
 		rx_ctl |= AX_RX_CTL_AMALL;
 	} else if (net->mc_count == 0) {
 		/* just broadcast and directed */
@@ -753,8 +753,8 @@
 
 	if (net->flags & IFF_PROMISC) {
 		rx_ctl |= 0x01;
-	} else if (net->flags & IFF_ALLMULTI
-		   || net->mc_count > AX_MAX_MCAST) {
+	} else if (net->flags & IFF_ALLMULTI ||
+		   net->mc_count > AX_MAX_MCAST) {
 		rx_ctl |= 0x02;
 	} else if (net->mc_count == 0) {
 		/* just broadcast and directed */
@@ -1327,7 +1327,7 @@
 	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
 	.data = 0x00130103,
 };
 
@@ -1337,7 +1337,7 @@
 	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
 	.data = 0x009f9d9f,
 };
 
@@ -1347,7 +1347,7 @@
 	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
 	.data = 0x00130103,
 };
 
@@ -1357,7 +1357,7 @@
 	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
 	.data = 0x001f1d1f,
 };
 
@@ -1367,7 +1367,7 @@
 	.status = asix_status,
 	.link_reset = ax88772_link_reset,
 	.reset = ax88772_link_reset,
-	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR,
 	.rx_fixup = asix_rx_fixup,
 	.tx_fixup = asix_tx_fixup,
 };
@@ -1378,7 +1378,7 @@
 	.status = asix_status,
 	.link_reset = ax88178_link_reset,
 	.reset = ax88178_link_reset,
-	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR,
 	.rx_fixup = asix_rx_fixup,
 	.tx_fixup = asix_tx_fixup,
 };
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 2bed6b0..22b87e6 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -436,8 +436,8 @@
 			clear_bit(TX_RUNNING, &catc->flags);
 	}
 
-	if ((catc->is_f5u011 && catc->tx_ptr)
-	     || (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
+	if ((catc->is_f5u011 && catc->tx_ptr) ||
+	    (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
 		netif_stop_queue(netdev);
 
 	spin_unlock_irqrestore(&catc->tx_lock, flags);
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
index 33d5c57..6491c9c 100644
--- a/drivers/net/usb/cdc-phonet.c
+++ b/drivers/net/usb/cdc-phonet.c
@@ -372,12 +372,12 @@
 	/* Data interface has one inactive and one active setting */
 	if (data_intf->num_altsetting != 2)
 		return -EINVAL;
-	if (data_intf->altsetting[0].desc.bNumEndpoints == 0
-	 && data_intf->altsetting[1].desc.bNumEndpoints == 2)
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 0 &&
+	    data_intf->altsetting[1].desc.bNumEndpoints == 2)
 		data_desc = data_intf->altsetting + 1;
 	else
-	if (data_intf->altsetting[0].desc.bNumEndpoints == 2
-	 && data_intf->altsetting[1].desc.bNumEndpoints == 0)
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 2 &&
+	    data_intf->altsetting[1].desc.bNumEndpoints == 0)
 		data_desc = data_intf->altsetting;
 	else
 		return -EINVAL;
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 2330065..c337ffc 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -121,8 +121,8 @@
 		int	headroom = skb_headroom(skb);
 		int	tailroom = skb_tailroom(skb);
 
-		if ((tailroom >= ETH_FCS_LEN + padlen)
-				&& (headroom >= EEM_HEAD))
+		if ((tailroom >= ETH_FCS_LEN + padlen) &&
+		    (headroom >= EEM_HEAD))
 			goto done;
 
 		if ((headroom + tailroom)
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 21e1ba1..21e183a 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -37,23 +37,23 @@
 
 static int is_rndis(struct usb_interface_descriptor *desc)
 {
-	return desc->bInterfaceClass == USB_CLASS_COMM
-		&& desc->bInterfaceSubClass == 2
-		&& desc->bInterfaceProtocol == 0xff;
+	return (desc->bInterfaceClass == USB_CLASS_COMM &&
+		desc->bInterfaceSubClass == 2 &&
+		desc->bInterfaceProtocol == 0xff);
 }
 
 static int is_activesync(struct usb_interface_descriptor *desc)
 {
-	return desc->bInterfaceClass == USB_CLASS_MISC
-		&& desc->bInterfaceSubClass == 1
-		&& desc->bInterfaceProtocol == 1;
+	return (desc->bInterfaceClass == USB_CLASS_MISC &&
+		desc->bInterfaceSubClass == 1 &&
+		desc->bInterfaceProtocol == 1);
 }
 
 static int is_wireless_rndis(struct usb_interface_descriptor *desc)
 {
-	return desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER
-		&& desc->bInterfaceSubClass == 1
-		&& desc->bInterfaceProtocol == 3;
+	return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
+		desc->bInterfaceSubClass == 1 &&
+		desc->bInterfaceProtocol == 3);
 }
 
 #else
@@ -116,9 +116,9 @@
 	/* this assumes that if there's a non-RNDIS vendor variant
 	 * of cdc-acm, it'll fail RNDIS requests cleanly.
 	 */
-	rndis = is_rndis(&intf->cur_altsetting->desc)
-		|| is_activesync(&intf->cur_altsetting->desc)
-		|| is_wireless_rndis(&intf->cur_altsetting->desc);
+	rndis = (is_rndis(&intf->cur_altsetting->desc) ||
+		 is_activesync(&intf->cur_altsetting->desc) ||
+		 is_wireless_rndis(&intf->cur_altsetting->desc));
 
 	memset(info, 0, sizeof *info);
 	info->control = intf;
@@ -279,10 +279,10 @@
 
 		dev->status = &info->control->cur_altsetting->endpoint [0];
 		desc = &dev->status->desc;
-		if (!usb_endpoint_is_int_in(desc)
-				|| (le16_to_cpu(desc->wMaxPacketSize)
-					< sizeof(struct usb_cdc_notification))
-				|| !desc->bInterval) {
+		if (!usb_endpoint_is_int_in(desc) ||
+		    (le16_to_cpu(desc->wMaxPacketSize)
+		     < sizeof(struct usb_cdc_notification)) ||
+		    !desc->bInterval) {
 			dev_dbg(&intf->dev, "bad notification endpoint\n");
 			dev->status = NULL;
 		}
@@ -411,13 +411,28 @@
 	return 0;
 }
 
+static int cdc_manage_power(struct usbnet *dev, int on)
+{
+	dev->intf->needs_remote_wakeup = on;
+	return 0;
+}
+
 static const struct driver_info	cdc_info = {
 	.description =	"CDC Ethernet Device",
-	.flags =	FLAG_ETHER,
+	.flags =	FLAG_ETHER | FLAG_LINK_INTR,
 	// .check_connect = cdc_check_connect,
 	.bind =		cdc_bind,
 	.unbind =	usbnet_cdc_unbind,
 	.status =	cdc_status,
+	.manage_power =	cdc_manage_power,
+};
+
+static const struct driver_info mbm_info = {
+	.description =	"Mobile Broadband Network Device",
+	.flags =	FLAG_WWAN,
+	.bind = 	cdc_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.status =	cdc_status,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -532,72 +547,72 @@
 	/* Ericsson F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3507g ver. 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1902, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3607gw */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1904, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3607gw ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3607gw ver 3 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3307 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3307 ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson C3607w */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3607gw */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3607gw ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Dell F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Dell F3607gw */
 	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Dell F3607gw ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 },
 	{ },		// END
 };
@@ -610,6 +625,8 @@
 	.disconnect =	usbnet_disconnect,
 	.suspend =	usbnet_suspend,
 	.resume =	usbnet_resume,
+	.reset_resume =	usbnet_resume,
+	.supports_autosuspend = 1,
 };
 
 
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index a2b30a1..3d406f9 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -611,7 +611,7 @@
 
 static const struct driver_info dm9601_info = {
 	.description	= "Davicom DM9601 USB Ethernet",
-	.flags		= FLAG_ETHER,
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
 	.bind		= dm9601_bind,
 	.rx_fixup	= dm9601_rx_fixup,
 	.tx_fixup	= dm9601_tx_fixup,
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index fa4e581..f78f090 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -378,7 +378,7 @@
 }
 
 #define DUMP(buf_, len_)	\
-	dbg_dump(__LINE__, __func__, buf_, len_)
+	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
 
 #define DUMP1(buf_, len_)			\
 	do {					\
@@ -602,9 +602,9 @@
 	port = hso_mux_to_port(mux);
 
 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
-		if (serial_table[i]
-		    && (dev2ser(serial_table[i])->shared_int == shared_int)
-		    && ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
+		if (serial_table[i] &&
+		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
+		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
 			return dev2ser(serial_table[i]);
 		}
 	}
@@ -846,8 +846,8 @@
 	dev_warn(&net->dev, "Tx timed out.\n");
 
 	/* Tear the waiting frame off the list */
-	if (odev->mux_bulk_tx_urb
-	    && (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
+	if (odev->mux_bulk_tx_urb &&
+	    (odev->mux_bulk_tx_urb->status == -EINPROGRESS))
 		usb_unlink_urb(odev->mux_bulk_tx_urb);
 
 	/* Update statistics */
@@ -1020,9 +1020,9 @@
 		u32 rest;
 		u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
 		rest = urb->actual_length % odev->in_endp->wMaxPacketSize;
-		if (((rest == 5) || (rest == 6))
-		    && !memcmp(((u8 *) urb->transfer_buffer) +
-			       urb->actual_length - 4, crc_check, 4)) {
+		if (((rest == 5) || (rest == 6)) &&
+		    !memcmp(((u8 *) urb->transfer_buffer) +
+			    urb->actual_length - 4, crc_check, 4)) {
 			urb->actual_length -= 4;
 		}
 	}
@@ -1226,9 +1226,9 @@
 			rest =
 			    urb->actual_length %
 			    serial->in_endp->wMaxPacketSize;
-			if (((rest == 5) || (rest == 6))
-			    && !memcmp(((u8 *) urb->transfer_buffer) +
-				       urb->actual_length - 4, crc_check, 4)) {
+			if (((rest == 5) || (rest == 6)) &&
+			    !memcmp(((u8 *) urb->transfer_buffer) +
+				    urb->actual_length - 4, crc_check, 4)) {
 				urb->actual_length -= 4;
 			}
 		}
@@ -1363,7 +1363,7 @@
 	/* reset the rts and dtr */
 	/* do the actual close */
 	serial->open_count--;
-	kref_put(&serial->parent->ref, hso_serial_ref_free);
+
 	if (serial->open_count <= 0) {
 		serial->open_count = 0;
 		spin_lock_irq(&serial->serial_lock);
@@ -1383,6 +1383,8 @@
 		usb_autopm_put_interface(serial->parent->interface);
 
 	mutex_unlock(&serial->parent->mutex);
+
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
 }
 
 /* close the requested serial port */
@@ -1527,7 +1529,7 @@
 		dev_warn(&usb->dev,
 			 "hso received invalid serial state notification\n");
 		DUMP(serial_state_notification,
-		     sizeof(hso_serial_state_notifation))
+		     sizeof(struct hso_serial_state_notification));
 	} else {
 
 		UART_state_bitmap = le16_to_cpu(serial_state_notification->
@@ -2980,8 +2982,8 @@
 
 	case HSO_INTF_BULK:
 		/* It's a regular bulk interface */
-		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK)
-		    && !disable_net)
+		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
+		    !disable_net)
 			hso_dev = hso_create_net_device(interface, port_spec);
 		else
 			hso_dev =
@@ -3144,8 +3146,8 @@
 	int i;
 
 	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
-		if (serial_table[i]
-		    && (serial_table[i]->interface == interface)) {
+		if (serial_table[i] &&
+		    (serial_table[i]->interface == interface)) {
 			hso_dev = dev2ser(serial_table[i]);
 			spin_lock_irq(&hso_dev->serial_lock);
 			tty = tty_kref_get(hso_dev->tty);
@@ -3161,8 +3163,8 @@
 	}
 
 	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
-		if (network_table[i]
-		    && (network_table[i]->interface == interface)) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == interface)) {
 			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
 			/* hso_stop_net_device doesn't stop the net queue since
 			 * traffic needs to start it again when suspended */
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index e391ef9..3b80e8d 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -471,16 +471,7 @@
 	int result;
 
 	dbg("kaweth_reset(%p)", kaweth);
-	result = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				USB_REQ_SET_CONFIGURATION,
-				0,
-				kaweth->dev->config[0].desc.bConfigurationValue,
-				0,
-				NULL,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
+	result = usb_reset_configuration(kaweth->dev);
 	mdelay(10);
 
 	dbg("kaweth_reset() returns %d.",result);
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index 10873d9..8737431 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -391,8 +391,8 @@
 
 	if (net->flags & IFF_PROMISC) {
 		data->config |= HIF_REG_CONFIG_PROMISCIOUS;
-	} else if (net->flags & IFF_ALLMULTI
-		   || net->mc_count > MCS7830_MAX_MCAST) {
+	} else if (net->flags & IFF_ALLMULTI ||
+		   net->mc_count > MCS7830_MAX_MCAST) {
 		data->config |= HIF_REG_CONFIG_ALLMULTICAST;
 	} else if (net->mc_count == 0) {
 		/* just broadcast and directed */
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index f56dec6..490fa8f 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -114,8 +114,8 @@
 	 */
 
 	/* Issue the request; xid is unique, don't bother byteswapping it */
-	if (likely(buf->msg_type != RNDIS_MSG_HALT
-			&& buf->msg_type != RNDIS_MSG_RESET)) {
+	if (likely(buf->msg_type != RNDIS_MSG_HALT &&
+		   buf->msg_type != RNDIS_MSG_RESET)) {
 		xid = dev->xid++;
 		if (!xid)
 			xid = dev->xid++;
@@ -493,9 +493,9 @@
 		data_len = le32_to_cpu(hdr->data_len);
 
 		/* don't choke if we see oob, per-packet data, etc */
-		if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
-				|| skb->len < msg_len
-				|| (data_offset + data_len + 8) > msg_len)) {
+		if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET ||
+			     skb->len < msg_len ||
+			     (data_offset + data_len + 8) > msg_len)) {
 			dev->net->stats.rx_frame_errors++;
 			devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
 				le32_to_cpu(hdr->msg_type),
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index ca5ca5a..035fab0 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -140,8 +140,8 @@
 	if (!alt || !in || !out)
 		return -EINVAL;
 
-	if (alt->desc.bAlternateSetting != 0
-			|| !(dev->driver_info->flags & FLAG_NO_SETINT)) {
+	if (alt->desc.bAlternateSetting != 0 ||
+	    !(dev->driver_info->flags & FLAG_NO_SETINT)) {
 		tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
 				alt->desc.bAlternateSetting);
 		if (tmp < 0)
@@ -351,9 +351,10 @@
 
 	spin_lock_irqsave (&dev->rxq.lock, lockflags);
 
-	if (netif_running (dev->net)
-			&& netif_device_present (dev->net)
-			&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
+	if (netif_running (dev->net) &&
+	    netif_device_present (dev->net) &&
+	    !test_bit (EVENT_RX_HALT, &dev->flags) &&
+	    !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
 		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
 		case -EPIPE:
 			usbnet_defer_kevent (dev, EVENT_RX_HALT);
@@ -391,8 +392,8 @@
 
 static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 {
-	if (dev->driver_info->rx_fixup
-			&& !dev->driver_info->rx_fixup (dev, skb))
+	if (dev->driver_info->rx_fixup &&
+	    !dev->driver_info->rx_fixup (dev, skb))
 		goto error;
 	// else network stack removes extra byte if we forced a short packet
 
@@ -484,8 +485,8 @@
 	defer_bh(dev, skb, &dev->rxq);
 
 	if (urb) {
-		if (netif_running (dev->net)
-				&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
+		if (netif_running (dev->net) &&
+		    !test_bit (EVENT_RX_HALT, &dev->flags)) {
 			rx_submit (dev, urb, GFP_ATOMIC);
 			return;
 		}
@@ -611,15 +612,39 @@
 /*-------------------------------------------------------------------------*/
 
 // precondition: never called in_interrupt
+static void usbnet_terminate_urbs(struct usbnet *dev)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
+	DECLARE_WAITQUEUE(wait, current);
+	int temp;
+
+	/* ensure there are no more active urbs */
+	add_wait_queue(&unlink_wakeup, &wait);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	dev->wait = &unlink_wakeup;
+	temp = unlink_urbs(dev, &dev->txq) +
+		unlink_urbs(dev, &dev->rxq);
+
+	/* maybe wait for deletions to finish. */
+	while (!skb_queue_empty(&dev->rxq)
+		&& !skb_queue_empty(&dev->txq)
+		&& !skb_queue_empty(&dev->done)) {
+			schedule_timeout(UNLINK_TIMEOUT_MS);
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			if (netif_msg_ifdown(dev))
+				devdbg(dev, "waited for %d urb completions",
+					temp);
+	}
+	set_current_state(TASK_RUNNING);
+	dev->wait = NULL;
+	remove_wait_queue(&unlink_wakeup, &wait);
+}
 
 int usbnet_stop (struct net_device *net)
 {
 	struct usbnet		*dev = netdev_priv(net);
 	struct driver_info	*info = dev->driver_info;
-	int			temp;
 	int			retval;
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK (unlink_wakeup);
-	DECLARE_WAITQUEUE (wait, current);
 
 	netif_stop_queue (net);
 
@@ -641,25 +666,8 @@
 				info->description);
 	}
 
-	if (!(info->flags & FLAG_AVOID_UNLINK_URBS)) {
-		/* ensure there are no more active urbs */
-		add_wait_queue(&unlink_wakeup, &wait);
-		dev->wait = &unlink_wakeup;
-		temp = unlink_urbs(dev, &dev->txq) +
-			unlink_urbs(dev, &dev->rxq);
-
-		/* maybe wait for deletions to finish. */
-		while (!skb_queue_empty(&dev->rxq)
-				&& !skb_queue_empty(&dev->txq)
-				&& !skb_queue_empty(&dev->done)) {
-			msleep(UNLINK_TIMEOUT_MS);
-			if (netif_msg_ifdown(dev))
-				devdbg(dev, "waited for %d urb completions",
-					temp);
-		}
-		dev->wait = NULL;
-		remove_wait_queue(&unlink_wakeup, &wait);
-	}
+	if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
+		usbnet_terminate_urbs(dev);
 
 	usb_kill_urb(dev->interrupt);
 
@@ -672,7 +680,10 @@
 	dev->flags = 0;
 	del_timer_sync (&dev->delay);
 	tasklet_kill (&dev->bh);
-	usb_autopm_put_interface(dev->intf);
+	if (info->manage_power)
+		info->manage_power(dev, 0);
+	else
+		usb_autopm_put_interface(dev->intf);
 
 	return 0;
 }
@@ -753,6 +764,12 @@
 
 	// delay posting reads until we're fully open
 	tasklet_schedule (&dev->bh);
+	if (info->manage_power) {
+		retval = info->manage_power(dev, 1);
+		if (retval < 0)
+			goto done;
+		usb_autopm_put_interface(dev->intf);
+	}
 	return retval;
 done:
 	usb_autopm_put_interface(dev->intf);
@@ -881,11 +898,16 @@
 	/* usb_clear_halt() needs a thread context */
 	if (test_bit (EVENT_TX_HALT, &dev->flags)) {
 		unlink_urbs (dev, &dev->txq);
+		status = usb_autopm_get_interface(dev->intf);
+		if (status < 0)
+			goto fail_pipe;
 		status = usb_clear_halt (dev->udev, dev->out);
-		if (status < 0
-				&& status != -EPIPE
-				&& status != -ESHUTDOWN) {
+		usb_autopm_put_interface(dev->intf);
+		if (status < 0 &&
+		    status != -EPIPE &&
+		    status != -ESHUTDOWN) {
 			if (netif_msg_tx_err (dev))
+fail_pipe:
 				deverr (dev, "can't clear tx halt, status %d",
 					status);
 		} else {
@@ -896,11 +918,16 @@
 	}
 	if (test_bit (EVENT_RX_HALT, &dev->flags)) {
 		unlink_urbs (dev, &dev->rxq);
+		status = usb_autopm_get_interface(dev->intf);
+		if (status < 0)
+			goto fail_halt;
 		status = usb_clear_halt (dev->udev, dev->in);
-		if (status < 0
-				&& status != -EPIPE
-				&& status != -ESHUTDOWN) {
+		usb_autopm_put_interface(dev->intf);
+		if (status < 0 &&
+		    status != -EPIPE &&
+		    status != -ESHUTDOWN) {
 			if (netif_msg_rx_err (dev))
+fail_halt:
 				deverr (dev, "can't clear rx halt, status %d",
 					status);
 		} else {
@@ -919,7 +946,12 @@
 			clear_bit (EVENT_RX_MEMORY, &dev->flags);
 		if (urb != NULL) {
 			clear_bit (EVENT_RX_MEMORY, &dev->flags);
+			status = usb_autopm_get_interface(dev->intf);
+			if (status < 0)
+				goto fail_lowmem;
 			rx_submit (dev, urb, GFP_KERNEL);
+			usb_autopm_put_interface(dev->intf);
+fail_lowmem:
 			tasklet_schedule (&dev->bh);
 		}
 	}
@@ -929,11 +961,18 @@
 		int			retval = 0;
 
 		clear_bit (EVENT_LINK_RESET, &dev->flags);
+		status = usb_autopm_get_interface(dev->intf);
+		if (status < 0)
+			goto skip_reset;
 		if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
+			usb_autopm_put_interface(dev->intf);
+skip_reset:
 			devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s",
 				retval,
 				dev->udev->bus->bus_name, dev->udev->devpath,
 				info->description);
+		} else {
+			usb_autopm_put_interface(dev->intf);
 		}
 	}
 
@@ -971,6 +1010,7 @@
 		case -EPROTO:
 		case -ETIME:
 		case -EILSEQ:
+			usb_mark_last_busy(dev->udev);
 			if (!timer_pending (&dev->delay)) {
 				mod_timer (&dev->delay,
 					jiffies + THROTTLE_JIFFIES);
@@ -987,6 +1027,7 @@
 		}
 	}
 
+	usb_autopm_put_interface_async(dev->intf);
 	urb->dev = NULL;
 	entry->state = tx_done;
 	defer_bh(dev, skb, &dev->txq);
@@ -1057,14 +1098,34 @@
 		}
 	}
 
-	spin_lock_irqsave (&dev->txq.lock, flags);
+	spin_lock_irqsave(&dev->txq.lock, flags);
+	retval = usb_autopm_get_interface_async(dev->intf);
+	if (retval < 0) {
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+		goto drop;
+	}
+
+#ifdef CONFIG_PM
+	/* if this triggers the device is still a sleep */
+	if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
+		/* transmission will be done in resume */
+		usb_anchor_urb(urb, &dev->deferred);
+		/* no use to process more packets */
+		netif_stop_queue(net);
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+		devdbg(dev, "Delaying transmission for resumption");
+		goto deferred;
+	}
+#endif
 
 	switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
 	case -EPIPE:
 		netif_stop_queue (net);
 		usbnet_defer_kevent (dev, EVENT_TX_HALT);
+		usb_autopm_put_interface_async(dev->intf);
 		break;
 	default:
+		usb_autopm_put_interface_async(dev->intf);
 		if (netif_msg_tx_err (dev))
 			devdbg (dev, "tx: submit urb err %d", retval);
 		break;
@@ -1088,6 +1149,9 @@
 		devdbg (dev, "> tx, len %d, type 0x%x",
 			length, skb->protocol);
 	}
+#ifdef CONFIG_PM
+deferred:
+#endif
 	return NETDEV_TX_OK;
 }
 EXPORT_SYMBOL_GPL(usbnet_start_xmit);
@@ -1126,10 +1190,10 @@
 		}
 
 	// or are we maybe short a few urbs?
-	} else if (netif_running (dev->net)
-			&& netif_device_present (dev->net)
-			&& !timer_pending (&dev->delay)
-			&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
+	} else if (netif_running (dev->net) &&
+		   netif_device_present (dev->net) &&
+		   !timer_pending (&dev->delay) &&
+		   !test_bit (EVENT_RX_HALT, &dev->flags)) {
 		int	temp = dev->rxq.qlen;
 		int	qlen = RX_QLEN (dev);
 
@@ -1210,6 +1274,14 @@
 
 // precondition: never called in_interrupt
 
+static struct device_type wlan_type = {
+	.name	= "wlan",
+};
+
+static struct device_type wwan_type = {
+	.name	= "wwan",
+};
+
 int
 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 {
@@ -1255,6 +1327,7 @@
 	dev->bh.func = usbnet_bh;
 	dev->bh.data = (unsigned long) dev;
 	INIT_WORK (&dev->kevent, kevent);
+	init_usb_anchor(&dev->deferred);
 	dev->delay.function = usbnet_bh;
 	dev->delay.data = (unsigned long) dev;
 	init_timer (&dev->delay);
@@ -1289,12 +1362,15 @@
 		// heuristic:  "usb%d" for links we know are two-host,
 		// else "eth%d" when there's reasonable doubt.  userspace
 		// can rename the link if it knows better.
-		if ((dev->driver_info->flags & FLAG_ETHER) != 0
-				&& (net->dev_addr [0] & 0x02) == 0)
+		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
+		    (net->dev_addr [0] & 0x02) == 0)
 			strcpy (net->name, "eth%d");
 		/* WLAN devices should always be named "wlan%d" */
 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
 			strcpy(net->name, "wlan%d");
+		/* WWAN devices should always be named "wwan%d" */
+		if ((dev->driver_info->flags & FLAG_WWAN) != 0)
+			strcpy(net->name, "wwan%d");
 
 		/* maybe the remote can't receive an Ethernet MTU */
 		if (net->mtu > (dev->hard_mtu - net->hard_header_len))
@@ -1322,6 +1398,12 @@
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
 
 	SET_NETDEV_DEV(net, &udev->dev);
+
+	if ((dev->driver_info->flags & FLAG_WLAN) != 0)
+		SET_NETDEV_DEVTYPE(net, &wlan_type);
+	if ((dev->driver_info->flags & FLAG_WWAN) != 0)
+		SET_NETDEV_DEVTYPE(net, &wwan_type);
+
 	status = register_netdev (net);
 	if (status)
 		goto out3;
@@ -1335,9 +1417,11 @@
 	// ok, it's ready to go.
 	usb_set_intfdata (udev, dev);
 
-	// start as if the link is up
 	netif_device_attach (net);
 
+	if (dev->driver_info->flags & FLAG_LINK_INTR)
+		netif_carrier_off(net);
+
 	return 0;
 
 out3:
@@ -1363,13 +1447,23 @@
 	struct usbnet		*dev = usb_get_intfdata(intf);
 
 	if (!dev->suspend_count++) {
+		spin_lock_irq(&dev->txq.lock);
+		/* don't autosuspend while transmitting */
+		if (dev->txq.qlen && (message.event & PM_EVENT_AUTO)) {
+			spin_unlock_irq(&dev->txq.lock);
+			return -EBUSY;
+		} else {
+			set_bit(EVENT_DEV_ASLEEP, &dev->flags);
+			spin_unlock_irq(&dev->txq.lock);
+		}
 		/*
 		 * accelerate emptying of the rx and queues, to avoid
 		 * having everything error out.
 		 */
 		netif_device_detach (dev->net);
-		(void) unlink_urbs (dev, &dev->rxq);
-		(void) unlink_urbs (dev, &dev->txq);
+		usbnet_terminate_urbs(dev);
+		usb_kill_urb(dev->interrupt);
+
 		/*
 		 * reattach so runtime management can use and
 		 * wake the device
@@ -1383,10 +1477,34 @@
 int usbnet_resume (struct usb_interface *intf)
 {
 	struct usbnet		*dev = usb_get_intfdata(intf);
+	struct sk_buff          *skb;
+	struct urb              *res;
+	int                     retval;
 
-	if (!--dev->suspend_count)
+	if (!--dev->suspend_count) {
+		spin_lock_irq(&dev->txq.lock);
+		while ((res = usb_get_from_anchor(&dev->deferred))) {
+
+			printk(KERN_INFO"%s has delayed data\n", __func__);
+			skb = (struct sk_buff *)res->context;
+			retval = usb_submit_urb(res, GFP_ATOMIC);
+			if (retval < 0) {
+				dev_kfree_skb_any(skb);
+				usb_free_urb(res);
+				usb_autopm_put_interface_async(dev->intf);
+			} else {
+				dev->net->trans_start = jiffies;
+				__skb_queue_tail(&dev->txq, skb);
+			}
+		}
+
+		smp_mb();
+		clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
+		spin_unlock_irq(&dev->txq.lock);
+		if (!(dev->txq.qlen >= TX_QLEN(dev)))
+			netif_start_queue(dev->net);
 		tasklet_schedule (&dev->bh);
-
+	}
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_resume);
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
index 04882c8..3eb0b16 100644
--- a/drivers/net/usb/zaurus.c
+++ b/drivers/net/usb/zaurus.c
@@ -174,8 +174,8 @@
 				goto bad_desc;
 			}
 			/* expect bcdVersion 1.0, ignore */
-			if (memcmp(&desc->bGUID, blan_guid, 16)
-				    && memcmp(&desc->bGUID, safe_guid, 16) ) {
+			if (memcmp(&desc->bGUID, blan_guid, 16) &&
+			    memcmp(&desc->bGUID, safe_guid, 16)) {
 				/* hey, this one might _really_ be MDLM! */
 				dev_dbg(&intf->dev, "MDLM guid\n");
 				goto bad_desc;
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ade5b34..63099c5 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -155,8 +155,6 @@
 	struct veth_net_stats *stats, *rcv_stats;
 	int length, cpu;
 
-	skb_orphan(skb);
-
 	priv = netdev_priv(dev);
 	rcv = priv->peer;
 	rcv_priv = netdev_priv(rcv);
@@ -168,20 +166,12 @@
 	if (!(rcv->flags & IFF_UP))
 		goto tx_drop;
 
-	if (skb->len > (rcv->mtu + MTU_PAD))
-		goto rx_drop;
-
-        skb->tstamp.tv64 = 0;
-	skb->pkt_type = PACKET_HOST;
-	skb->protocol = eth_type_trans(skb, rcv);
 	if (dev->features & NETIF_F_NO_CSUM)
 		skb->ip_summed = rcv_priv->ip_summed;
 
-	skb->mark = 0;
-	secpath_reset(skb);
-	nf_reset(skb);
-
-	length = skb->len;
+	length = skb->len + ETH_HLEN;
+	if (dev_forward_skb(rcv, skb) != NET_RX_SUCCESS)
+		goto rx_drop;
 
 	stats->tx_bytes += length;
 	stats->tx_packets++;
@@ -189,7 +179,6 @@
 	rcv_stats->rx_bytes += length;
 	rcv_stats->rx_packets++;
 
-	netif_rx(skb);
 	return NETDEV_TX_OK;
 
 tx_drop:
@@ -210,32 +199,29 @@
 static struct net_device_stats *veth_get_stats(struct net_device *dev)
 {
 	struct veth_priv *priv;
-	struct net_device_stats *dev_stats;
 	int cpu;
-	struct veth_net_stats *stats;
+	struct veth_net_stats *stats, total = {0};
 
 	priv = netdev_priv(dev);
-	dev_stats = &dev->stats;
 
-	dev_stats->rx_packets = 0;
-	dev_stats->tx_packets = 0;
-	dev_stats->rx_bytes = 0;
-	dev_stats->tx_bytes = 0;
-	dev_stats->tx_dropped = 0;
-	dev_stats->rx_dropped = 0;
-
-	for_each_online_cpu(cpu) {
+	for_each_possible_cpu(cpu) {
 		stats = per_cpu_ptr(priv->stats, cpu);
 
-		dev_stats->rx_packets += stats->rx_packets;
-		dev_stats->tx_packets += stats->tx_packets;
-		dev_stats->rx_bytes += stats->rx_bytes;
-		dev_stats->tx_bytes += stats->tx_bytes;
-		dev_stats->tx_dropped += stats->tx_dropped;
-		dev_stats->rx_dropped += stats->rx_dropped;
+		total.rx_packets += stats->rx_packets;
+		total.tx_packets += stats->tx_packets;
+		total.rx_bytes   += stats->rx_bytes;
+		total.tx_bytes   += stats->tx_bytes;
+		total.tx_dropped += stats->tx_dropped;
+		total.rx_dropped += stats->rx_dropped;
 	}
+	dev->stats.rx_packets = total.rx_packets;
+	dev->stats.tx_packets = total.tx_packets;
+	dev->stats.rx_bytes   = total.rx_bytes;
+	dev->stats.tx_bytes   = total.tx_bytes;
+	dev->stats.tx_dropped = total.tx_dropped;
+	dev->stats.rx_dropped = total.rx_dropped;
 
-	return dev_stats;
+	return &dev->stats;
 }
 
 static int veth_open(struct net_device *dev)
@@ -340,7 +326,7 @@
 
 static struct rtnl_link_ops veth_link_ops;
 
-static int veth_newlink(struct net_device *dev,
+static int veth_newlink(struct net *src_net, struct net_device *dev,
 			 struct nlattr *tb[], struct nlattr *data[])
 {
 	int err;
@@ -348,6 +334,7 @@
 	struct veth_priv *priv;
 	char ifname[IFNAMSIZ];
 	struct nlattr *peer_tb[IFLA_MAX + 1], **tbp;
+	struct net *net;
 
 	/*
 	 * create and register peer first
@@ -380,14 +367,22 @@
 	else
 		snprintf(ifname, IFNAMSIZ, DRV_NAME "%%d");
 
-	peer = rtnl_create_link(dev_net(dev), ifname, &veth_link_ops, tbp);
-	if (IS_ERR(peer))
+	net = rtnl_link_get_net(src_net, tbp);
+	if (IS_ERR(net))
+		return PTR_ERR(net);
+
+	peer = rtnl_create_link(src_net, net, ifname, &veth_link_ops, tbp);
+	if (IS_ERR(peer)) {
+		put_net(net);
 		return PTR_ERR(peer);
+	}
 
 	if (tbp[IFLA_ADDRESS] == NULL)
 		random_ether_addr(peer->dev_addr);
 
 	err = register_netdevice(peer);
+	put_net(net);
+	net = NULL;
 	if (err < 0)
 		goto err_register_peer;
 
@@ -442,7 +437,7 @@
 	return err;
 }
 
-static void veth_dellink(struct net_device *dev)
+static void veth_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct veth_priv *priv;
 	struct net_device *peer;
@@ -450,8 +445,8 @@
 	priv = netdev_priv(dev);
 	peer = priv->peer;
 
-	unregister_netdevice(dev);
-	unregister_netdevice(peer);
+	unregister_netdevice_queue(dev, head);
+	unregister_netdevice_queue(peer, head);
 }
 
 static const struct nla_policy veth_policy[VETH_INFO_MAX + 1];
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 1fd7058..593e01f 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -42,9 +42,9 @@
 
 /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
    Setting to > 1518 effectively disables this feature. */
-#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-       || defined(CONFIG_SPARC) || defined(__ia64__) \
-       || defined(__sh__) || defined(__mips__)
+#if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
+	defined(CONFIG_SPARC) || defined(__ia64__) ||		   \
+	defined(__sh__) || defined(__mips__)
 static int rx_copybreak = 1518;
 #else
 static int rx_copybreak;
@@ -1150,7 +1150,7 @@
 	void __iomem *ioaddr = rp->base;
 	int rc;
 
-	rc = request_irq(rp->pdev->irq, &rhine_interrupt, IRQF_SHARED, dev->name,
+	rc = request_irq(rp->pdev->irq, rhine_interrupt, IRQF_SHARED, dev->name,
 			dev);
 	if (rc)
 		return rc;
@@ -1484,15 +1484,15 @@
 				}
 			}
 		} else {
-			struct sk_buff *skb;
+			struct sk_buff *skb = NULL;
 			/* Length should omit the CRC */
 			int pkt_len = data_size - 4;
 
 			/* Check if the packet is long enough to accept without
 			   copying to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak &&
-				(skb = netdev_alloc_skb(dev, pkt_len + NET_IP_ALIGN)) != NULL) {
-				skb_reserve(skb, NET_IP_ALIGN);	/* 16 byte align the IP header */
+			if (pkt_len < rx_copybreak)
+				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
+			if (skb) {
 				pci_dma_sync_single_for_cpu(rp->pdev,
 							    rp->rx_skbuff_dma[entry],
 							    rp->rx_buf_sz,
@@ -1683,8 +1683,8 @@
 		rx_mode = 0x1C;
 		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
 		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
-	} else if ((dev->mc_count > multicast_filter_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		/* Too many to match, or accept all multicasts. */
 		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
 		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index e04e5be..4ceb441 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -9,7 +9,6 @@
  *
  * TODO
  *	rx_copybreak/alignment
- *	Scatter gather
  *	More testing
  *
  * The changes are (c) Copyright 2004, Red Hat Inc. <alan@lxorguk.ukuu.org.uk>
@@ -275,7 +274,7 @@
 
 #define DMA_LENGTH_MIN  0
 #define DMA_LENGTH_MAX  7
-#define DMA_LENGTH_DEF  0
+#define DMA_LENGTH_DEF  6
 
 /* DMA_length[] is used for controlling the DMA length
    0: 8 DWORDs
@@ -298,14 +297,6 @@
 */
 VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
 
-#define TX_CSUM_DEF     1
-/* txcsum_offload[] is used for setting the checksum offload ability of NIC.
-   (We only support RX checksum offload now)
-   0: disable csum_offload[checksum offload
-   1: enable checksum offload. (Default)
-*/
-VELOCITY_PARAM(txcsum_offload, "Enable transmit packet checksum offload");
-
 #define FLOW_CNTL_DEF   1
 #define FLOW_CNTL_MIN   1
 #define FLOW_CNTL_MAX   5
@@ -354,21 +345,10 @@
 */
 VELOCITY_PARAM(wol_opts, "Wake On Lan options");
 
-#define INT_WORKS_DEF   20
-#define INT_WORKS_MIN   10
-#define INT_WORKS_MAX   64
-
-VELOCITY_PARAM(int_works, "Number of packets per interrupt services");
-
 static int rx_copybreak = 200;
 module_param(rx_copybreak, int, 0644);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 
-#ifdef CONFIG_PM
-static DEFINE_SPINLOCK(velocity_dev_list_lock);
-static LIST_HEAD(velocity_dev_list);
-#endif
-
 /*
  *	Internal board variants. At the moment we have only one
  */
@@ -417,14 +397,6 @@
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct velocity_info *vptr = netdev_priv(dev);
 
-#ifdef CONFIG_PM
-	unsigned long flags;
-
-	spin_lock_irqsave(&velocity_dev_list_lock, flags);
-	if (!list_empty(&velocity_dev_list))
-		list_del(&vptr->list);
-	spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-#endif
 	unregister_netdev(dev);
 	iounmap(vptr->mac_regs);
 	pci_release_regions(pdev);
@@ -510,13 +482,11 @@
 	velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
 	velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
 
-	velocity_set_bool_opt(&opts->flags, txcsum_offload[index], TX_CSUM_DEF, VELOCITY_FLAGS_TX_CSUM, "txcsum_offload", devname);
 	velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
 	velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
 	velocity_set_bool_opt(&opts->flags, ValPktLen[index], VAL_PKT_LEN_DEF, VELOCITY_FLAGS_VAL_PKT_LEN, "ValPktLen", devname);
 	velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index], MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF, "Media link mode", devname);
 	velocity_set_int_opt((int *) &opts->wol_opts, wol_opts[index], WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF, "Wake On Lan options", devname);
-	velocity_set_int_opt((int *) &opts->int_works, int_works[index], INT_WORKS_MIN, INT_WORKS_MAX, INT_WORKS_DEF, "Interrupt service works", devname);
 	opts->numrx = (opts->numrx & ~3);
 }
 
@@ -925,8 +895,8 @@
 
 	/*
 	   Check if new status is consisent with current status
-	   if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE)
-	   || (mii_status==curr_status)) {
+	   if (((mii_status & curr_status) & VELOCITY_AUTONEG_ENABLE) ||
+	       (mii_status==curr_status)) {
 	   vptr->mii_status=mii_check_media_mode(vptr->mac_regs);
 	   vptr->mii_status=check_connection_type(vptr->mac_regs);
 	   VELOCITY_PRT(MSG_LEVEL_INFO, "Velocity link no change\n");
@@ -1162,8 +1132,8 @@
 		writel(0xffffffff, &regs->MARCAM[0]);
 		writel(0xffffffff, &regs->MARCAM[4]);
 		rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
-	} else if ((dev->mc_count > vptr->multicast_limit)
-		   || (dev->flags & IFF_ALLMULTI)) {
+	} else if ((dev->mc_count > vptr->multicast_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
 		writel(0xffffffff, &regs->MARCAM[0]);
 		writel(0xffffffff, &regs->MARCAM[4]);
 		rx_mode = (RCR_AM | RCR_AB);
@@ -1259,6 +1229,66 @@
 	}
 }
 
+/**
+ * setup_queue_timers	-	Setup interrupt timers
+ *
+ * Setup interrupt frequency during suppression (timeout if the frame
+ * count isn't filled).
+ */
+static void setup_queue_timers(struct velocity_info *vptr)
+{
+	/* Only for newer revisions */
+	if (vptr->rev_id >= REV_ID_VT3216_A0) {
+		u8 txqueue_timer = 0;
+		u8 rxqueue_timer = 0;
+
+		if (vptr->mii_status & (VELOCITY_SPEED_1000 |
+				VELOCITY_SPEED_100)) {
+			txqueue_timer = vptr->options.txqueue_timer;
+			rxqueue_timer = vptr->options.rxqueue_timer;
+		}
+
+		writeb(txqueue_timer, &vptr->mac_regs->TQETMR);
+		writeb(rxqueue_timer, &vptr->mac_regs->RQETMR);
+	}
+}
+/**
+ * setup_adaptive_interrupts  -  Setup interrupt suppression
+ *
+ * @vptr velocity adapter
+ *
+ * The velocity is able to suppress interrupt during high interrupt load.
+ * This function turns on that feature.
+ */
+static void setup_adaptive_interrupts(struct velocity_info *vptr)
+{
+	struct mac_regs __iomem *regs = vptr->mac_regs;
+	u16 tx_intsup = vptr->options.tx_intsup;
+	u16 rx_intsup = vptr->options.rx_intsup;
+
+	/* Setup default interrupt mask (will be changed below) */
+	vptr->int_mask = INT_MASK_DEF;
+
+	/* Set Tx Interrupt Suppression Threshold */
+	writeb(CAMCR_PS0, &regs->CAMCR);
+	if (tx_intsup != 0) {
+		vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I |
+				ISR_PTX2I | ISR_PTX3I);
+		writew(tx_intsup, &regs->ISRCTL);
+	} else
+		writew(ISRCTL_TSUPDIS, &regs->ISRCTL);
+
+	/* Set Rx Interrupt Suppression Threshold */
+	writeb(CAMCR_PS1, &regs->CAMCR);
+	if (rx_intsup != 0) {
+		vptr->int_mask &= ~ISR_PRXI;
+		writew(rx_intsup, &regs->ISRCTL);
+	} else
+		writew(ISRCTL_RSUPDIS, &regs->ISRCTL);
+
+	/* Select page to interrupt hold timer */
+	writeb(0, &regs->CAMCR);
+}
 
 /**
  *	velocity_init_registers	-	initialise MAC registers
@@ -1345,7 +1375,7 @@
 		 */
 		enable_mii_autopoll(regs);
 
-		vptr->int_mask = INT_MASK_DEF;
+		setup_adaptive_interrupts(vptr);
 
 		writel(vptr->rx.pool_dma, &regs->RDBaseLo);
 		writew(vptr->options.numrx - 1, &regs->RDCSize);
@@ -1483,7 +1513,8 @@
 	 *	Do the gymnastics to get the buffer head for data at
 	 *	64byte alignment.
 	 */
-	skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63);
+	skb_reserve(rd_info->skb,
+			64 - ((unsigned long) rd_info->skb->data & 63));
 	rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data,
 					vptr->rx.buf_sz, PCI_DMA_FROMDEVICE);
 
@@ -1602,12 +1633,10 @@
  */
 static int velocity_init_td_ring(struct velocity_info *vptr)
 {
-	dma_addr_t curr;
 	int j;
 
 	/* Init the TD ring entries */
 	for (j = 0; j < vptr->tx.numq; j++) {
-		curr = vptr->tx.pool_dma[j];
 
 		vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
 					    sizeof(struct velocity_td_info),
@@ -1673,21 +1702,27 @@
  *	Release an transmit buffer. If the buffer was preallocated then
  *	recycle it, if not then unmap the buffer.
  */
-static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_info *tdinfo)
+static void velocity_free_tx_buf(struct velocity_info *vptr,
+		struct velocity_td_info *tdinfo, struct tx_desc *td)
 {
 	struct sk_buff *skb = tdinfo->skb;
-	int i;
-	int pktlen;
 
 	/*
 	 *	Don't unmap the pre-allocated tx_bufs
 	 */
 	if (tdinfo->skb_dma) {
+		int i;
 
-		pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
 		for (i = 0; i < tdinfo->nskb_dma; i++) {
-			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
-			tdinfo->skb_dma[i] = 0;
+			size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN);
+
+			/* For scatter-gather */
+			if (skb_shinfo(skb)->nr_frags > 0)
+				pktlen = max_t(size_t, pktlen,
+						td->td_buf[i].size & ~TD_QUEUE);
+
+			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i],
+					le16_to_cpu(pktlen), PCI_DMA_TODEVICE);
 		}
 	}
 	dev_kfree_skb_irq(skb);
@@ -1801,6 +1836,8 @@
 				BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
 			else
 				BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+			setup_queue_timers(vptr);
 		}
 		/*
 		 *	Get link status from PHYSR0
@@ -1887,7 +1924,7 @@
 				stats->tx_packets++;
 				stats->tx_bytes += tdinfo->skb->len;
 			}
-			velocity_free_tx_buf(vptr, tdinfo);
+			velocity_free_tx_buf(vptr, tdinfo, td);
 			vptr->tx.used[qnum]--;
 		}
 		vptr->tx.tail[qnum] = idx;
@@ -1899,8 +1936,8 @@
 	 *	Look to see if we should kick the transmit network
 	 *	layer for more work.
 	 */
-	if (netif_queue_stopped(vptr->dev) && (full == 0)
-	    && (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
+	if (netif_queue_stopped(vptr->dev) && (full == 0) &&
+	    (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
 		netif_wake_queue(vptr->dev);
 	}
 	return works;
@@ -1949,10 +1986,9 @@
 	if (pkt_size < rx_copybreak) {
 		struct sk_buff *new_skb;
 
-		new_skb = netdev_alloc_skb(vptr->dev, pkt_size + 2);
+		new_skb = netdev_alloc_skb_ip_align(vptr->dev, pkt_size);
 		if (new_skb) {
 			new_skb->ip_summed = rx_skb[0]->ip_summed;
-			skb_reserve(new_skb, 2);
 			skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
 			*rx_skb = new_skb;
 			ret = 0;
@@ -2060,13 +2096,14 @@
  *	any received packets from the receive queue. Hand the ring
  *	slots back to the adapter for reuse.
  */
-static int velocity_rx_srv(struct velocity_info *vptr, int status)
+static int velocity_rx_srv(struct velocity_info *vptr, int status,
+		int budget_left)
 {
 	struct net_device_stats *stats = &vptr->dev->stats;
 	int rd_curr = vptr->rx.curr;
 	int works = 0;
 
-	do {
+	while (works < budget_left) {
 		struct rx_desc *rd = vptr->rx.ring + rd_curr;
 
 		if (!vptr->rx.info[rd_curr].skb)
@@ -2097,7 +2134,8 @@
 		rd_curr++;
 		if (rd_curr >= vptr->options.numrx)
 			rd_curr = 0;
-	} while (++works <= 15);
+		works++;
+	}
 
 	vptr->rx.curr = rd_curr;
 
@@ -2108,6 +2146,40 @@
 	return works;
 }
 
+static int velocity_poll(struct napi_struct *napi, int budget)
+{
+	struct velocity_info *vptr = container_of(napi,
+			struct velocity_info, napi);
+	unsigned int rx_done;
+	u32 isr_status;
+
+	spin_lock(&vptr->lock);
+	isr_status = mac_read_isr(vptr->mac_regs);
+
+	/* Ack the interrupt */
+	mac_write_isr(vptr->mac_regs, isr_status);
+	if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+		velocity_error(vptr, isr_status);
+
+	/*
+	 * Do rx and tx twice for performance (taken from the VIA
+	 * out-of-tree driver).
+	 */
+	rx_done = velocity_rx_srv(vptr, isr_status, budget / 2);
+	velocity_tx_srv(vptr, isr_status);
+	rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done);
+	velocity_tx_srv(vptr, isr_status);
+
+	spin_unlock(&vptr->lock);
+
+	/* If budget not fully consumed, exit the polling mode */
+	if (rx_done < budget) {
+		napi_complete(napi);
+		mac_enable_int(vptr->mac_regs);
+	}
+
+	return rx_done;
+}
 
 /**
  *	velocity_intr		-	interrupt callback
@@ -2124,8 +2196,6 @@
 	struct net_device *dev = dev_instance;
 	struct velocity_info *vptr = netdev_priv(dev);
 	u32 isr_status;
-	int max_count = 0;
-
 
 	spin_lock(&vptr->lock);
 	isr_status = mac_read_isr(vptr->mac_regs);
@@ -2136,32 +2206,13 @@
 		return IRQ_NONE;
 	}
 
-	mac_disable_int(vptr->mac_regs);
-
-	/*
-	 *	Keep processing the ISR until we have completed
-	 *	processing and the isr_status becomes zero
-	 */
-
-	while (isr_status != 0) {
-		mac_write_isr(vptr->mac_regs, isr_status);
-		if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
-			velocity_error(vptr, isr_status);
-		if (isr_status & (ISR_PRXI | ISR_PPRXI))
-			max_count += velocity_rx_srv(vptr, isr_status);
-		if (isr_status & (ISR_PTXI | ISR_PPTXI))
-			max_count += velocity_tx_srv(vptr, isr_status);
-		isr_status = mac_read_isr(vptr->mac_regs);
-		if (max_count > vptr->options.int_works) {
-			printk(KERN_WARNING "%s: excessive work at interrupt.\n",
-				dev->name);
-			max_count = 0;
-		}
+	if (likely(napi_schedule_prep(&vptr->napi))) {
+		mac_disable_int(vptr->mac_regs);
+		__napi_schedule(&vptr->napi);
 	}
 	spin_unlock(&vptr->lock);
-	mac_enable_int(vptr->mac_regs);
-	return IRQ_HANDLED;
 
+	return IRQ_HANDLED;
 }
 
 /**
@@ -2190,7 +2241,7 @@
 
 	velocity_init_registers(vptr, VELOCITY_INIT_COLD);
 
-	ret = request_irq(vptr->pdev->irq, &velocity_intr, IRQF_SHARED,
+	ret = request_irq(vptr->pdev->irq, velocity_intr, IRQF_SHARED,
 			  dev->name, dev);
 	if (ret < 0) {
 		/* Power down the chip */
@@ -2201,6 +2252,7 @@
 
 	mac_enable_int(vptr->mac_regs);
 	netif_start_queue(dev);
+	napi_enable(&vptr->napi);
 	vptr->flags |= VELOCITY_FLAGS_OPENED;
 out:
 	return ret;
@@ -2436,6 +2488,7 @@
 {
 	struct velocity_info *vptr = netdev_priv(dev);
 
+	napi_disable(&vptr->napi);
 	netif_stop_queue(dev);
 	velocity_shutdown(vptr);
 
@@ -2470,14 +2523,22 @@
 	struct velocity_td_info *tdinfo;
 	unsigned long flags;
 	int pktlen;
-	__le16 len;
-	int index;
+	int index, prev;
+	int i = 0;
 
 	if (skb_padto(skb, ETH_ZLEN))
 		goto out;
-	pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
 
-	len = cpu_to_le16(pktlen);
+	/* The hardware can handle at most 7 memory segments, so merge
+	 * the skb if there are more */
+	if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	pktlen = skb_shinfo(skb)->nr_frags == 0 ?
+			max_t(unsigned int, skb->len, ETH_ZLEN) :
+				skb_headlen(skb);
 
 	spin_lock_irqsave(&vptr->lock, flags);
 
@@ -2494,11 +2555,24 @@
 	 */
 	tdinfo->skb = skb;
 	tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
-	td_ptr->tdesc0.len = len;
+	td_ptr->tdesc0.len = cpu_to_le16(pktlen);
 	td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
 	td_ptr->td_buf[0].pa_high = 0;
-	td_ptr->td_buf[0].size = len;
-	tdinfo->nskb_dma = 1;
+	td_ptr->td_buf[0].size = cpu_to_le16(pktlen);
+
+	/* Handle fragments */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		tdinfo->skb_dma[i + 1] = pci_map_page(vptr->pdev, frag->page,
+				frag->page_offset, frag->size,
+				PCI_DMA_TODEVICE);
+
+		td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+		td_ptr->td_buf[i + 1].pa_high = 0;
+		td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size);
+	}
+	tdinfo->nskb_dma = i + 1;
 
 	td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
 
@@ -2510,8 +2584,8 @@
 	/*
 	 *	Handle hardware checksum
 	 */
-	if ((vptr->flags & VELOCITY_FLAGS_TX_CSUM)
-				 && (skb->ip_summed == CHECKSUM_PARTIAL)) {
+	if ((dev->features & NETIF_F_IP_CSUM) &&
+	    (skb->ip_summed == CHECKSUM_PARTIAL)) {
 		const struct iphdr *ip = ip_hdr(skb);
 		if (ip->protocol == IPPROTO_TCP)
 			td_ptr->tdesc1.TCR |= TCR0_TCPCK;
@@ -2519,23 +2593,21 @@
 			td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
 		td_ptr->tdesc1.TCR |= TCR0_IPCK;
 	}
-	{
 
-		int prev = index - 1;
+	prev = index - 1;
+	if (prev < 0)
+		prev = vptr->options.numtx - 1;
+	td_ptr->tdesc0.len |= OWNED_BY_NIC;
+	vptr->tx.used[qnum]++;
+	vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
 
-		if (prev < 0)
-			prev = vptr->options.numtx - 1;
-		td_ptr->tdesc0.len |= OWNED_BY_NIC;
-		vptr->tx.used[qnum]++;
-		vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
+	if (AVAIL_TD(vptr, qnum) < 1)
+		netif_stop_queue(dev);
 
-		if (AVAIL_TD(vptr, qnum) < 1)
-			netif_stop_queue(dev);
+	td_ptr = &(vptr->tx.rings[qnum][prev]);
+	td_ptr->td_buf[0].size |= TD_QUEUE;
+	mac_tx_queue_wake(vptr->mac_regs, qnum);
 
-		td_ptr = &(vptr->tx.rings[qnum][prev]);
-		td_ptr->td_buf[0].size |= TD_QUEUE;
-		mac_tx_queue_wake(vptr->mac_regs, qnum);
-	}
 	dev->trans_start = jiffies;
 	spin_unlock_irqrestore(&vptr->lock, flags);
 out:
@@ -2578,7 +2650,6 @@
 	vptr->tx.numq = info->txqueue;
 	vptr->multicast_limit = MCAM_SIZE;
 	spin_lock_init(&vptr->lock);
-	INIT_LIST_HEAD(&vptr->list);
 }
 
 /**
@@ -2755,12 +2826,10 @@
 	dev->irq = pdev->irq;
 	dev->netdev_ops = &velocity_netdev_ops;
 	dev->ethtool_ops = &velocity_ethtool_ops;
+	netif_napi_add(dev, &vptr->napi, velocity_poll, VELOCITY_NAPI_WEIGHT);
 
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
-		NETIF_F_HW_VLAN_RX;
-
-	if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
-		dev->features |= NETIF_F_IP_CSUM;
+		NETIF_F_HW_VLAN_RX | NETIF_F_IP_CSUM;
 
 	ret = register_netdev(dev);
 	if (ret < 0)
@@ -2777,15 +2846,6 @@
 	/* and leave the chip powered down */
 
 	pci_set_power_state(pdev, PCI_D3hot);
-#ifdef CONFIG_PM
-	{
-		unsigned long flags;
-
-		spin_lock_irqsave(&velocity_dev_list_lock, flags);
-		list_add(&vptr->list, &velocity_dev_list);
-		spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-	}
-#endif
 	velocity_nics++;
 out:
 	return ret;
@@ -3222,15 +3282,114 @@
 	 msglevel = value;
 }
 
+static int get_pending_timer_val(int val)
+{
+	int mult_bits = val >> 6;
+	int mult = 1;
+
+	switch (mult_bits)
+	{
+	case 1:
+		mult = 4; break;
+	case 2:
+		mult = 16; break;
+	case 3:
+		mult = 64; break;
+	case 0:
+	default:
+		break;
+	}
+
+	return (val & 0x3f) * mult;
+}
+
+static void set_pending_timer_val(int *val, u32 us)
+{
+	u8 mult = 0;
+	u8 shift = 0;
+
+	if (us >= 0x3f) {
+		mult = 1; /* mult with 4 */
+		shift = 2;
+	}
+	if (us >= 0x3f * 4) {
+		mult = 2; /* mult with 16 */
+		shift = 4;
+	}
+	if (us >= 0x3f * 16) {
+		mult = 3; /* mult with 64 */
+		shift = 6;
+	}
+
+	*val = (mult << 6) | ((us >> shift) & 0x3f);
+}
+
+
+static int velocity_get_coalesce(struct net_device *dev,
+		struct ethtool_coalesce *ecmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+
+	ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup;
+	ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup;
+
+	ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer);
+	ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer);
+
+	return 0;
+}
+
+static int velocity_set_coalesce(struct net_device *dev,
+		struct ethtool_coalesce *ecmd)
+{
+	struct velocity_info *vptr = netdev_priv(dev);
+	int max_us = 0x3f * 64;
+
+	/* 6 bits of  */
+	if (ecmd->tx_coalesce_usecs > max_us)
+		return -EINVAL;
+	if (ecmd->rx_coalesce_usecs > max_us)
+		return -EINVAL;
+
+	if (ecmd->tx_max_coalesced_frames > 0xff)
+		return -EINVAL;
+	if (ecmd->rx_max_coalesced_frames > 0xff)
+		return -EINVAL;
+
+	vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames;
+	vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames;
+
+	set_pending_timer_val(&vptr->options.rxqueue_timer,
+			ecmd->rx_coalesce_usecs);
+	set_pending_timer_val(&vptr->options.txqueue_timer,
+			ecmd->tx_coalesce_usecs);
+
+	/* Setup the interrupt suppression and queue timers */
+	mac_disable_int(vptr->mac_regs);
+	setup_adaptive_interrupts(vptr);
+	setup_queue_timers(vptr);
+
+	mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
+	mac_clear_isr(vptr->mac_regs);
+	mac_enable_int(vptr->mac_regs);
+
+	return 0;
+}
+
 static const struct ethtool_ops velocity_ethtool_ops = {
 	.get_settings	=	velocity_get_settings,
 	.set_settings	=	velocity_set_settings,
 	.get_drvinfo	=	velocity_get_drvinfo,
+	.set_tx_csum	=	ethtool_op_set_tx_csum,
+	.get_tx_csum	=	ethtool_op_get_tx_csum,
 	.get_wol	=	velocity_ethtool_get_wol,
 	.set_wol	=	velocity_ethtool_set_wol,
 	.get_msglevel	=	velocity_get_msglevel,
 	.set_msglevel	=	velocity_set_msglevel,
+	.set_sg 	=	ethtool_op_set_sg,
 	.get_link	=	velocity_get_link,
+	.get_coalesce	=	velocity_get_coalesce,
+	.set_coalesce	=	velocity_set_coalesce,
 	.begin		=	velocity_ethtool_up,
 	.complete	=	velocity_ethtool_down
 };
@@ -3241,20 +3400,10 @@
 {
 	struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
 	struct net_device *dev = ifa->ifa_dev->dev;
-	struct velocity_info *vptr;
-	unsigned long flags;
 
-	if (dev_net(dev) != &init_net)
-		return NOTIFY_DONE;
-
-	spin_lock_irqsave(&velocity_dev_list_lock, flags);
-	list_for_each_entry(vptr, &velocity_dev_list, list) {
-		if (vptr->dev == dev) {
-			velocity_get_ip(vptr);
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
+	if (dev_net(dev) == &init_net &&
+	    dev->netdev_ops == &velocity_netdev_ops)
+		velocity_get_ip(netdev_priv(dev));
 
 	return NOTIFY_DONE;
 }
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 2f00c13..ef4a0f6 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -29,9 +29,10 @@
 
 #define VELOCITY_NAME          "via-velocity"
 #define VELOCITY_FULL_DRV_NAM  "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver"
-#define VELOCITY_VERSION       "1.14"
+#define VELOCITY_VERSION       "1.15"
 
 #define VELOCITY_IO_SIZE	256
+#define VELOCITY_NAPI_WEIGHT	64
 
 #define PKT_BUF_SZ          1540
 
@@ -1005,7 +1006,8 @@
 
 	volatile __le32 RDBaseLo;	/* 0x38 */
 	volatile __le16 RDIdx;		/* 0x3C */
-	volatile __le16 reserved_3E;
+	volatile u8 TQETMR;		/* 0x3E, VT3216 and above only */
+	volatile u8 RQETMR;		/* 0x3F, VT3216 and above only */
 
 	volatile __le32 TDBaseLo[4];	/* 0x40 */
 
@@ -1421,7 +1423,6 @@
  */
 
 #define     VELOCITY_FLAGS_TAGGING         0x00000001UL
-#define     VELOCITY_FLAGS_TX_CSUM         0x00000002UL
 #define     VELOCITY_FLAGS_RX_CSUM         0x00000004UL
 #define     VELOCITY_FLAGS_IP_ALIGN        0x00000008UL
 #define     VELOCITY_FLAGS_VAL_PKT_LEN     0x00000010UL
@@ -1491,6 +1492,10 @@
 	int rx_bandwidth_hi;
 	int rx_bandwidth_lo;
 	int rx_bandwidth_en;
+	int rxqueue_timer;
+	int txqueue_timer;
+	int tx_intsup;
+	int rx_intsup;
 	u32 flags;
 };
 
@@ -1499,8 +1504,6 @@
 #define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
 
 struct velocity_info {
-	struct list_head list;
-
 	struct pci_dev *pdev;
 	struct net_device *dev;
 
@@ -1559,6 +1562,8 @@
 	u32 ticks;
 
 	u8 rev_id;
+
+	struct napi_struct napi;
 };
 
 /**
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index b9e002f..c708ecc 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -282,13 +282,12 @@
 	do {
 		struct skb_vnet_hdr *hdr;
 
-		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(vi->dev, MAX_PACKET_LEN);
 		if (unlikely(!skb)) {
 			oom = true;
 			break;
 		}
 
-		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, MAX_PACKET_LEN);
 
 		hdr = skb_vnet_hdr(skb);
@@ -343,14 +342,12 @@
 	do {
 		skb_frag_t *f;
 
-		skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(vi->dev, GOOD_COPY_LEN);
 		if (unlikely(!skb)) {
 			oom = true;
 			break;
 		}
 
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		f = &skb_shinfo(skb)->frags[0];
 		f->page = get_a_page(vi, gfp);
 		if (!f->page) {
@@ -431,8 +428,8 @@
 	/* Out of packets? */
 	if (received < budget) {
 		napi_complete(napi);
-		if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq))
-		    && napi_schedule_prep(napi)) {
+		if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq)) &&
+		    napi_schedule_prep(napi)) {
 			vi->rvq->vq_ops->disable_cb(vi->rvq);
 			__napi_schedule(napi);
 			goto again;
@@ -893,9 +890,9 @@
 	INIT_DELAYED_WORK(&vi->refill, refill_work);
 
 	/* If we can receive ANY GSO packets, we must allocate large ones. */
-	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4)
-	    || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6)
-	    || virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
+	if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
+	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) ||
+	    virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
 		vi->big_packets = true;
 
 	if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
diff --git a/drivers/net/vmxnet3/vmxnet3_defs.h b/drivers/net/vmxnet3/vmxnet3_defs.h
index dc8ee44..b4889e6 100644
--- a/drivers/net/vmxnet3/vmxnet3_defs.h
+++ b/drivers/net/vmxnet3/vmxnet3_defs.h
@@ -90,23 +90,60 @@
 	VMXNET3_CMD_GET_CONF_INTR
 };
 
+/*
+ *	Little Endian layout of bitfields -
+ *	Byte 0 :	7.....len.....0
+ *	Byte 1 :	rsvd gen 13.len.8
+ *	Byte 2 : 	5.msscof.0 ext1  dtype
+ *	Byte 3 : 	13...msscof...6
+ *
+ *	Big Endian layout of bitfields -
+ *	Byte 0:		13...msscof...6
+ *	Byte 1 : 	5.msscof.0 ext1  dtype
+ *	Byte 2 :	rsvd gen 13.len.8
+ *	Byte 3 :	7.....len.....0
+ *
+ *	Thus, le32_to_cpu on the dword will allow the big endian driver to read
+ *	the bit fields correctly. And cpu_to_le32 will convert bitfields
+ *	bit fields written by big endian driver to format required by device.
+ */
+
 struct Vmxnet3_TxDesc {
-	u64		addr;
+	__le64 addr;
 
-	u32		len:14;
-	u32		gen:1;      /* generation bit */
-	u32		rsvd:1;
-	u32		dtype:1;    /* descriptor type */
-	u32		ext1:1;
-	u32		msscof:14;  /* MSS, checksum offset, flags */
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32 msscof:14;  /* MSS, checksum offset, flags */
+	u32 ext1:1;
+	u32 dtype:1;    /* descriptor type */
+	u32 rsvd:1;
+	u32 gen:1;      /* generation bit */
+	u32 len:14;
+#else
+	u32 len:14;
+	u32 gen:1;      /* generation bit */
+	u32 rsvd:1;
+	u32 dtype:1;    /* descriptor type */
+	u32 ext1:1;
+	u32 msscof:14;  /* MSS, checksum offset, flags */
+#endif  /* __BIG_ENDIAN_BITFIELD */
 
-	u32		hlen:10;    /* header len */
-	u32		om:2;       /* offload mode */
-	u32		eop:1;      /* End Of Packet */
-	u32		cq:1;       /* completion request */
-	u32		ext2:1;
-	u32		ti:1;       /* VLAN Tag Insertion */
-	u32		tci:16;     /* Tag to Insert */
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32 tci:16;     /* Tag to Insert */
+	u32 ti:1;       /* VLAN Tag Insertion */
+	u32 ext2:1;
+	u32 cq:1;       /* completion request */
+	u32 eop:1;      /* End Of Packet */
+	u32 om:2;       /* offload mode */
+	u32 hlen:10;    /* header len */
+#else
+	u32 hlen:10;    /* header len */
+	u32 om:2;       /* offload mode */
+	u32 eop:1;      /* End Of Packet */
+	u32 cq:1;       /* completion request */
+	u32 ext2:1;
+	u32 ti:1;       /* VLAN Tag Insertion */
+	u32 tci:16;     /* Tag to Insert */
+#endif  /* __BIG_ENDIAN_BITFIELD */
 };
 
 /* TxDesc.OM values */
@@ -118,6 +155,8 @@
 #define VMXNET3_TXD_EOP_SHIFT	12
 #define VMXNET3_TXD_CQ_SHIFT	13
 #define VMXNET3_TXD_GEN_SHIFT	14
+#define VMXNET3_TXD_EOP_DWORD_SHIFT 3
+#define VMXNET3_TXD_GEN_DWORD_SHIFT 2
 
 #define VMXNET3_TXD_CQ		(1 << VMXNET3_TXD_CQ_SHIFT)
 #define VMXNET3_TXD_EOP		(1 << VMXNET3_TXD_EOP_SHIFT)
@@ -130,29 +169,40 @@
 	u8		data[VMXNET3_HDR_COPY_SIZE];
 };
 
+#define VMXNET3_TCD_GEN_SHIFT	31
+#define VMXNET3_TCD_GEN_SIZE	1
+#define VMXNET3_TCD_TXIDX_SHIFT	0
+#define VMXNET3_TCD_TXIDX_SIZE	12
+#define VMXNET3_TCD_GEN_DWORD_SHIFT	3
 
 struct Vmxnet3_TxCompDesc {
 	u32		txdIdx:12;    /* Index of the EOP TxDesc */
 	u32		ext1:20;
 
-	u32		ext2;
-	u32		ext3;
+	__le32		ext2;
+	__le32		ext3;
 
 	u32		rsvd:24;
 	u32		type:7;       /* completion type */
 	u32		gen:1;        /* generation bit */
 };
 
-
 struct Vmxnet3_RxDesc {
-	u64		addr;
+	__le64		addr;
 
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32		gen:1;        /* Generation bit */
+	u32		rsvd:15;
+	u32		dtype:1;      /* Descriptor type */
+	u32		btype:1;      /* Buffer Type */
+	u32		len:14;
+#else
 	u32		len:14;
 	u32		btype:1;      /* Buffer Type */
 	u32		dtype:1;      /* Descriptor type */
 	u32		rsvd:15;
 	u32		gen:1;        /* Generation bit */
-
+#endif
 	u32		ext1;
 };
 
@@ -164,8 +214,17 @@
 #define VMXNET3_RXD_BTYPE_SHIFT  14
 #define VMXNET3_RXD_GEN_SHIFT    31
 
-
 struct Vmxnet3_RxCompDesc {
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32		ext2:1;
+	u32		cnc:1;        /* Checksum Not Calculated */
+	u32		rssType:4;    /* RSS hash type used */
+	u32		rqID:10;      /* rx queue/ring ID */
+	u32		sop:1;        /* Start of Packet */
+	u32		eop:1;        /* End of Packet */
+	u32		ext1:2;
+	u32		rxdIdx:12;    /* Index of the RxDesc */
+#else
 	u32		rxdIdx:12;    /* Index of the RxDesc */
 	u32		ext1:2;
 	u32		eop:1;        /* End of Packet */
@@ -174,14 +233,36 @@
 	u32		rssType:4;    /* RSS hash type used */
 	u32		cnc:1;        /* Checksum Not Calculated */
 	u32		ext2:1;
+#endif  /* __BIG_ENDIAN_BITFIELD */
 
-	u32		rssHash;      /* RSS hash value */
+	__le32		rssHash;      /* RSS hash value */
 
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32		tci:16;       /* Tag stripped */
+	u32		ts:1;         /* Tag is stripped */
+	u32		err:1;        /* Error */
+	u32		len:14;       /* data length */
+#else
 	u32		len:14;       /* data length */
 	u32		err:1;        /* Error */
 	u32		ts:1;         /* Tag is stripped */
 	u32		tci:16;       /* Tag stripped */
+#endif  /* __BIG_ENDIAN_BITFIELD */
 
+
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32		gen:1;        /* generation bit */
+	u32		type:7;       /* completion type */
+	u32		fcs:1;        /* Frame CRC correct */
+	u32		frg:1;        /* IP Fragment */
+	u32		v4:1;         /* IPv4 */
+	u32		v6:1;         /* IPv6 */
+	u32		ipc:1;        /* IP Checksum Correct */
+	u32		tcp:1;        /* TCP packet */
+	u32		udp:1;        /* UDP packet */
+	u32		tuc:1;        /* TCP/UDP Checksum Correct */
+	u32		csum:16;
+#else
 	u32		csum:16;
 	u32		tuc:1;        /* TCP/UDP Checksum Correct */
 	u32		udp:1;        /* UDP packet */
@@ -193,6 +274,7 @@
 	u32		fcs:1;        /* Frame CRC correct */
 	u32		type:7;       /* completion type */
 	u32		gen:1;        /* generation bit */
+#endif  /* __BIG_ENDIAN_BITFIELD */
 };
 
 /* fields in RxCompDesc we access via Vmxnet3_GenericDesc.dword[3] */
@@ -206,6 +288,8 @@
 /* csum OK for TCP/UDP pkts over IP */
 #define VMXNET3_RCD_CSUM_OK (1 << VMXNET3_RCD_TUC_SHIFT | \
 			     1 << VMXNET3_RCD_IPC_SHIFT)
+#define VMXNET3_TXD_GEN_SIZE 1
+#define VMXNET3_TXD_EOP_SIZE 1
 
 /* value of RxCompDesc.rssType */
 enum {
@@ -219,9 +303,9 @@
 
 /* a union for accessing all cmd/completion descriptors */
 union Vmxnet3_GenericDesc {
-	u64				qword[2];
-	u32				dword[4];
-	u16				word[8];
+	__le64				qword[2];
+	__le32				dword[4];
+	__le16				word[8];
 	struct Vmxnet3_TxDesc		txd;
 	struct Vmxnet3_RxDesc		rxd;
 	struct Vmxnet3_TxCompDesc	tcd;
@@ -287,18 +371,24 @@
 
 
 struct Vmxnet3_GOSInfo {
-	u32				gosBits:2;	/* 32-bit or 64-bit? */
-	u32				gosType:4;   /* which guest */
-	u32				gosVer:16;   /* gos version */
-	u32				gosMisc:10;  /* other info about gos */
+#ifdef __BIG_ENDIAN_BITFIELD
+	u32		gosMisc:10;    /* other info about gos */
+	u32		gosVer:16;     /* gos version */
+	u32		gosType:4;     /* which guest */
+	u32		gosBits:2;    /* 32-bit or 64-bit? */
+#else
+	u32		gosBits:2;     /* 32-bit or 64-bit? */
+	u32		gosType:4;     /* which guest */
+	u32		gosVer:16;     /* gos version */
+	u32		gosMisc:10;    /* other info about gos */
+#endif  /* __BIG_ENDIAN_BITFIELD */
 };
 
-
 struct Vmxnet3_DriverInfo {
-	u32				version;
+	__le32				version;
 	struct Vmxnet3_GOSInfo		gos;
-	u32				vmxnet3RevSpt;
-	u32				uptVerSpt;
+	__le32				vmxnet3RevSpt;
+	__le32				uptVerSpt;
 };
 
 
@@ -315,42 +405,42 @@
 
 struct Vmxnet3_MiscConf {
 	struct Vmxnet3_DriverInfo driverInfo;
-	u64		uptFeatures;
-	u64		ddPA;         /* driver data PA */
-	u64		queueDescPA;  /* queue descriptor table PA */
-	u32		ddLen;        /* driver data len */
-	u32		queueDescLen; /* queue desc. table len in bytes */
-	u32		mtu;
-	u16		maxNumRxSG;
+	__le64		uptFeatures;
+	__le64		ddPA;         /* driver data PA */
+	__le64		queueDescPA;  /* queue descriptor table PA */
+	__le32		ddLen;        /* driver data len */
+	__le32		queueDescLen; /* queue desc. table len in bytes */
+	__le32		mtu;
+	__le16		maxNumRxSG;
 	u8		numTxQueues;
 	u8		numRxQueues;
-	u32		reserved[4];
+	__le32		reserved[4];
 };
 
 
 struct Vmxnet3_TxQueueConf {
-	u64		txRingBasePA;
-	u64		dataRingBasePA;
-	u64		compRingBasePA;
-	u64		ddPA;         /* driver data */
-	u64		reserved;
-	u32		txRingSize;   /* # of tx desc */
-	u32		dataRingSize; /* # of data desc */
-	u32		compRingSize; /* # of comp desc */
-	u32		ddLen;        /* size of driver data */
+	__le64		txRingBasePA;
+	__le64		dataRingBasePA;
+	__le64		compRingBasePA;
+	__le64		ddPA;         /* driver data */
+	__le64		reserved;
+	__le32		txRingSize;   /* # of tx desc */
+	__le32		dataRingSize; /* # of data desc */
+	__le32		compRingSize; /* # of comp desc */
+	__le32		ddLen;        /* size of driver data */
 	u8		intrIdx;
 	u8		_pad[7];
 };
 
 
 struct Vmxnet3_RxQueueConf {
-	u64		rxRingBasePA[2];
-	u64		compRingBasePA;
-	u64		ddPA;            /* driver data */
-	u64		reserved;
-	u32		rxRingSize[2];   /* # of rx desc */
-	u32		compRingSize;    /* # of rx comp desc */
-	u32		ddLen;           /* size of driver data */
+	__le64		rxRingBasePA[2];
+	__le64		compRingBasePA;
+	__le64		ddPA;            /* driver data */
+	__le64		reserved;
+	__le32		rxRingSize[2];   /* # of rx desc */
+	__le32		compRingSize;    /* # of rx comp desc */
+	__le32		ddLen;           /* size of driver data */
 	u8		intrIdx;
 	u8		_pad[7];
 };
@@ -381,7 +471,7 @@
 	u8		eventIntrIdx;
 	u8		modLevels[VMXNET3_MAX_INTRS];	/* moderation level for
 							 * each intr */
-	u32		reserved[3];
+	__le32		reserved[3];
 };
 
 /* one bit per VLAN ID, the size is in the units of u32	*/
@@ -391,21 +481,21 @@
 struct Vmxnet3_QueueStatus {
 	bool		stopped;
 	u8		_pad[3];
-	u32		error;
+	__le32		error;
 };
 
 
 struct Vmxnet3_TxQueueCtrl {
-	u32		txNumDeferred;
-	u32		txThreshold;
-	u64		reserved;
+	__le32		txNumDeferred;
+	__le32		txThreshold;
+	__le64		reserved;
 };
 
 
 struct Vmxnet3_RxQueueCtrl {
 	bool		updateRxProd;
 	u8		_pad[7];
-	u64		reserved;
+	__le64		reserved;
 };
 
 enum {
@@ -417,11 +507,11 @@
 };
 
 struct Vmxnet3_RxFilterConf {
-	u32		rxMode;       /* VMXNET3_RXM_xxx */
-	u16		mfTableLen;   /* size of the multicast filter table */
-	u16		_pad1;
-	u64		mfTablePA;    /* PA of the multicast filters table */
-	u32		vfTable[VMXNET3_VFT_SIZE]; /* vlan filter */
+	__le32		rxMode;       /* VMXNET3_RXM_xxx */
+	__le16		mfTableLen;   /* size of the multicast filter table */
+	__le16		_pad1;
+	__le64		mfTablePA;    /* PA of the multicast filters table */
+	__le32		vfTable[VMXNET3_VFT_SIZE]; /* vlan filter */
 };
 
 
@@ -444,7 +534,7 @@
 
 
 struct Vmxnet3_PMConf {
-	u16		wakeUpEvents;  /* VMXNET3_PM_WAKEUP_xxx */
+	__le16		wakeUpEvents;  /* VMXNET3_PM_WAKEUP_xxx */
 	u8		numFilters;
 	u8		pad[5];
 	struct Vmxnet3_PM_PktFilter filters[VMXNET3_PM_MAX_FILTERS];
@@ -452,9 +542,9 @@
 
 
 struct Vmxnet3_VariableLenConfDesc {
-	u32		confVer;
-	u32		confLen;
-	u64		confPA;
+	__le32		confVer;
+	__le32		confLen;
+	__le64		confPA;
 };
 
 
@@ -491,12 +581,12 @@
 
 /* All structures in DriverShared are padded to multiples of 8 bytes */
 struct Vmxnet3_DriverShared {
-	u32				magic;
+	__le32				magic;
 	/* make devRead start at 64bit boundaries */
-	u32					pad;
-	struct Vmxnet3_DSDevRead		devRead;
-	u32					ecr;
-	u32					reserved[5];
+	__le32				pad;
+	struct Vmxnet3_DSDevRead	devRead;
+	__le32				ecr;
+	__le32				reserved[5];
 };
 
 
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 004353a..1ceb9d0 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -24,12 +24,13 @@
  *
  */
 
+#include <net/ip6_checksum.h>
+
 #include "vmxnet3_int.h"
 
 char vmxnet3_driver_name[] = "vmxnet3";
 #define VMXNET3_DRIVER_DESC "VMware vmxnet3 virtual NIC driver"
 
-
 /*
  * PCI Device ID Table
  * Last entry must be all 0s
@@ -151,11 +152,10 @@
 	}
 }
 
-
 static void
 vmxnet3_process_events(struct vmxnet3_adapter *adapter)
 {
-	u32 events = adapter->shared->ecr;
+	u32 events = le32_to_cpu(adapter->shared->ecr);
 	if (!events)
 		return;
 
@@ -173,7 +173,7 @@
 		if (adapter->tqd_start->status.stopped) {
 			printk(KERN_ERR "%s: tq error 0x%x\n",
 			       adapter->netdev->name,
-			       adapter->tqd_start->status.error);
+			       le32_to_cpu(adapter->tqd_start->status.error));
 		}
 		if (adapter->rqd_start->status.stopped) {
 			printk(KERN_ERR "%s: rq error 0x%x\n",
@@ -185,6 +185,106 @@
 	}
 }
 
+#ifdef __BIG_ENDIAN_BITFIELD
+/*
+ * The device expects the bitfields in shared structures to be written in
+ * little endian. When CPU is big endian, the following routines are used to
+ * correctly read and write into ABI.
+ * The general technique used here is : double word bitfields are defined in
+ * opposite order for big endian architecture. Then before reading them in
+ * driver the complete double word is translated using le32_to_cpu. Similarly
+ * After the driver writes into bitfields, cpu_to_le32 is used to translate the
+ * double words into required format.
+ * In order to avoid touching bits in shared structure more than once, temporary
+ * descriptors are used. These are passed as srcDesc to following functions.
+ */
+static void vmxnet3_RxDescToCPU(const struct Vmxnet3_RxDesc *srcDesc,
+				struct Vmxnet3_RxDesc *dstDesc)
+{
+	u32 *src = (u32 *)srcDesc + 2;
+	u32 *dst = (u32 *)dstDesc + 2;
+	dstDesc->addr = le64_to_cpu(srcDesc->addr);
+	*dst = le32_to_cpu(*src);
+	dstDesc->ext1 = le32_to_cpu(srcDesc->ext1);
+}
+
+static void vmxnet3_TxDescToLe(const struct Vmxnet3_TxDesc *srcDesc,
+			       struct Vmxnet3_TxDesc *dstDesc)
+{
+	int i;
+	u32 *src = (u32 *)(srcDesc + 1);
+	u32 *dst = (u32 *)(dstDesc + 1);
+
+	/* Working backwards so that the gen bit is set at the end. */
+	for (i = 2; i > 0; i--) {
+		src--;
+		dst--;
+		*dst = cpu_to_le32(*src);
+	}
+}
+
+
+static void vmxnet3_RxCompToCPU(const struct Vmxnet3_RxCompDesc *srcDesc,
+				struct Vmxnet3_RxCompDesc *dstDesc)
+{
+	int i = 0;
+	u32 *src = (u32 *)srcDesc;
+	u32 *dst = (u32 *)dstDesc;
+	for (i = 0; i < sizeof(struct Vmxnet3_RxCompDesc) / sizeof(u32); i++) {
+		*dst = le32_to_cpu(*src);
+		src++;
+		dst++;
+	}
+}
+
+
+/* Used to read bitfield values from double words. */
+static u32 get_bitfield32(const __le32 *bitfield, u32 pos, u32 size)
+{
+	u32 temp = le32_to_cpu(*bitfield);
+	u32 mask = ((1 << size) - 1) << pos;
+	temp &= mask;
+	temp >>= pos;
+	return temp;
+}
+
+
+
+#endif  /* __BIG_ENDIAN_BITFIELD */
+
+#ifdef __BIG_ENDIAN_BITFIELD
+
+#   define VMXNET3_TXDESC_GET_GEN(txdesc) get_bitfield32(((const __le32 *) \
+			txdesc) + VMXNET3_TXD_GEN_DWORD_SHIFT, \
+			VMXNET3_TXD_GEN_SHIFT, VMXNET3_TXD_GEN_SIZE)
+#   define VMXNET3_TXDESC_GET_EOP(txdesc) get_bitfield32(((const __le32 *) \
+			txdesc) + VMXNET3_TXD_EOP_DWORD_SHIFT, \
+			VMXNET3_TXD_EOP_SHIFT, VMXNET3_TXD_EOP_SIZE)
+#   define VMXNET3_TCD_GET_GEN(tcd) get_bitfield32(((const __le32 *)tcd) + \
+			VMXNET3_TCD_GEN_DWORD_SHIFT, VMXNET3_TCD_GEN_SHIFT, \
+			VMXNET3_TCD_GEN_SIZE)
+#   define VMXNET3_TCD_GET_TXIDX(tcd) get_bitfield32((const __le32 *)tcd, \
+			VMXNET3_TCD_TXIDX_SHIFT, VMXNET3_TCD_TXIDX_SIZE)
+#   define vmxnet3_getRxComp(dstrcd, rcd, tmp) do { \
+			(dstrcd) = (tmp); \
+			vmxnet3_RxCompToCPU((rcd), (tmp)); \
+		} while (0)
+#   define vmxnet3_getRxDesc(dstrxd, rxd, tmp) do { \
+			(dstrxd) = (tmp); \
+			vmxnet3_RxDescToCPU((rxd), (tmp)); \
+		} while (0)
+
+#else
+
+#   define VMXNET3_TXDESC_GET_GEN(txdesc) ((txdesc)->gen)
+#   define VMXNET3_TXDESC_GET_EOP(txdesc) ((txdesc)->eop)
+#   define VMXNET3_TCD_GET_GEN(tcd) ((tcd)->gen)
+#   define VMXNET3_TCD_GET_TXIDX(tcd) ((tcd)->txdIdx)
+#   define vmxnet3_getRxComp(dstrcd, rcd, tmp) (dstrcd) = (rcd)
+#   define vmxnet3_getRxDesc(dstrxd, rxd, tmp) (dstrxd) = (rxd)
+
+#endif /* __BIG_ENDIAN_BITFIELD  */
+
 
 static void
 vmxnet3_unmap_tx_buf(struct vmxnet3_tx_buf_info *tbi,
@@ -212,7 +312,7 @@
 
 	/* no out of order completion */
 	BUG_ON(tq->buf_info[eop_idx].sop_idx != tq->tx_ring.next2comp);
-	BUG_ON(tq->tx_ring.base[eop_idx].txd.eop != 1);
+	BUG_ON(VMXNET3_TXDESC_GET_EOP(&(tq->tx_ring.base[eop_idx].txd)) != 1);
 
 	skb = tq->buf_info[eop_idx].skb;
 	BUG_ON(skb == NULL);
@@ -246,9 +346,10 @@
 	union Vmxnet3_GenericDesc *gdesc;
 
 	gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
-	while (gdesc->tcd.gen == tq->comp_ring.gen) {
-		completed += vmxnet3_unmap_pkt(gdesc->tcd.txdIdx, tq,
-					       adapter->pdev, adapter);
+	while (VMXNET3_TCD_GET_GEN(&gdesc->tcd) == tq->comp_ring.gen) {
+		completed += vmxnet3_unmap_pkt(VMXNET3_TCD_GET_TXIDX(
+					       &gdesc->tcd), tq, adapter->pdev,
+					       adapter);
 
 		vmxnet3_comp_ring_adv_next2proc(&tq->comp_ring);
 		gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
@@ -472,9 +573,9 @@
 		}
 
 		BUG_ON(rbi->dma_addr == 0);
-		gd->rxd.addr = rbi->dma_addr;
-		gd->dword[2] = (ring->gen << VMXNET3_RXD_GEN_SHIFT) | val |
-				rbi->len;
+		gd->rxd.addr = cpu_to_le64(rbi->dma_addr);
+		gd->dword[2] = cpu_to_le32((ring->gen << VMXNET3_RXD_GEN_SHIFT)
+					   | val | rbi->len);
 
 		num_allocated++;
 		vmxnet3_cmd_ring_adv_next2fill(ring);
@@ -531,10 +632,10 @@
 
 	/* no need to map the buffer if headers are copied */
 	if (ctx->copy_size) {
-		ctx->sop_txd->txd.addr = tq->data_ring.basePA +
+		ctx->sop_txd->txd.addr = cpu_to_le64(tq->data_ring.basePA +
 					tq->tx_ring.next2fill *
-					sizeof(struct Vmxnet3_TxDataDesc);
-		ctx->sop_txd->dword[2] = dw2 | ctx->copy_size;
+					sizeof(struct Vmxnet3_TxDataDesc));
+		ctx->sop_txd->dword[2] = cpu_to_le32(dw2 | ctx->copy_size);
 		ctx->sop_txd->dword[3] = 0;
 
 		tbi = tq->buf_info + tq->tx_ring.next2fill;
@@ -542,7 +643,8 @@
 
 		dev_dbg(&adapter->netdev->dev,
 			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
-			tq->tx_ring.next2fill, ctx->sop_txd->txd.addr,
+			tq->tx_ring.next2fill,
+			le64_to_cpu(ctx->sop_txd->txd.addr),
 			ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
 
@@ -570,14 +672,14 @@
 		gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
 		BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
 
-		gdesc->txd.addr = tbi->dma_addr;
-		gdesc->dword[2] = dw2 | buf_size;
+		gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
+		gdesc->dword[2] = cpu_to_le32(dw2 | buf_size);
 		gdesc->dword[3] = 0;
 
 		dev_dbg(&adapter->netdev->dev,
 			"txd[%u]: 0x%Lx 0x%x 0x%x\n",
-			tq->tx_ring.next2fill, gdesc->txd.addr,
-			gdesc->dword[2], gdesc->dword[3]);
+			tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
+			le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
 		dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
 
@@ -599,14 +701,14 @@
 		gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
 		BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
 
-		gdesc->txd.addr = tbi->dma_addr;
-		gdesc->dword[2] = dw2 | frag->size;
+		gdesc->txd.addr = cpu_to_le64(tbi->dma_addr);
+		gdesc->dword[2] = cpu_to_le32(dw2 | frag->size);
 		gdesc->dword[3] = 0;
 
 		dev_dbg(&adapter->netdev->dev,
 			"txd[%u]: 0x%llu %u %u\n",
-			tq->tx_ring.next2fill, gdesc->txd.addr,
-			gdesc->dword[2], gdesc->dword[3]);
+			tq->tx_ring.next2fill, le64_to_cpu(gdesc->txd.addr),
+			le32_to_cpu(gdesc->dword[2]), gdesc->dword[3]);
 		vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
 		dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
 	}
@@ -751,6 +853,10 @@
 	unsigned long flags;
 	struct vmxnet3_tx_ctx ctx;
 	union Vmxnet3_GenericDesc *gdesc;
+#ifdef __BIG_ENDIAN_BITFIELD
+	/* Use temporary descriptor to avoid touching bits multiple times */
+	union Vmxnet3_GenericDesc tempTxDesc;
+#endif
 
 	/* conservatively estimate # of descriptors to use */
 	count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
@@ -827,16 +933,22 @@
 	vmxnet3_map_pkt(skb, &ctx, tq, adapter->pdev, adapter);
 
 	/* setup the EOP desc */
-	ctx.eop_txd->dword[3] = VMXNET3_TXD_CQ | VMXNET3_TXD_EOP;
+	ctx.eop_txd->dword[3] = cpu_to_le32(VMXNET3_TXD_CQ | VMXNET3_TXD_EOP);
 
 	/* setup the SOP desc */
+#ifdef __BIG_ENDIAN_BITFIELD
+	gdesc = &tempTxDesc;
+	gdesc->dword[2] = ctx.sop_txd->dword[2];
+	gdesc->dword[3] = ctx.sop_txd->dword[3];
+#else
 	gdesc = ctx.sop_txd;
+#endif
 	if (ctx.mss) {
 		gdesc->txd.hlen = ctx.eth_ip_hdr_size + ctx.l4_hdr_size;
 		gdesc->txd.om = VMXNET3_OM_TSO;
 		gdesc->txd.msscof = ctx.mss;
-		tq->shared->txNumDeferred += (skb->len - gdesc->txd.hlen +
-					     ctx.mss - 1) / ctx.mss;
+		le32_add_cpu(&tq->shared->txNumDeferred, (skb->len -
+			     gdesc->txd.hlen + ctx.mss - 1) / ctx.mss);
 	} else {
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 			gdesc->txd.hlen = ctx.eth_ip_hdr_size;
@@ -847,7 +959,7 @@
 			gdesc->txd.om = 0;
 			gdesc->txd.msscof = 0;
 		}
-		tq->shared->txNumDeferred++;
+		le32_add_cpu(&tq->shared->txNumDeferred, 1);
 	}
 
 	if (vlan_tx_tag_present(skb)) {
@@ -855,19 +967,27 @@
 		gdesc->txd.tci = vlan_tx_tag_get(skb);
 	}
 
-	wmb();
-
-	/* finally flips the GEN bit of the SOP desc */
-	gdesc->dword[2] ^= VMXNET3_TXD_GEN;
+	/* finally flips the GEN bit of the SOP desc. */
+	gdesc->dword[2] = cpu_to_le32(le32_to_cpu(gdesc->dword[2]) ^
+						  VMXNET3_TXD_GEN);
+#ifdef __BIG_ENDIAN_BITFIELD
+	/* Finished updating in bitfields of Tx Desc, so write them in original
+	 * place.
+	 */
+	vmxnet3_TxDescToLe((struct Vmxnet3_TxDesc *)gdesc,
+			   (struct Vmxnet3_TxDesc *)ctx.sop_txd);
+	gdesc = ctx.sop_txd;
+#endif
 	dev_dbg(&adapter->netdev->dev,
 		"txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
 		(u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd -
-		tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2],
-		gdesc->dword[3]);
+		tq->tx_ring.base), le64_to_cpu(gdesc->txd.addr),
+		le32_to_cpu(gdesc->dword[2]), le32_to_cpu(gdesc->dword[3]));
 
 	spin_unlock_irqrestore(&tq->tx_lock, flags);
 
-	if (tq->shared->txNumDeferred >= tq->shared->txThreshold) {
+	if (le32_to_cpu(tq->shared->txNumDeferred) >=
+					le32_to_cpu(tq->shared->txThreshold)) {
 		tq->shared->txNumDeferred = 0;
 		VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_TXPROD,
 				       tq->tx_ring.next2fill);
@@ -889,9 +1009,8 @@
 vmxnet3_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	struct vmxnet3_tx_queue *tq = &adapter->tx_queue;
 
-	return vmxnet3_tq_xmit(skb, tq, adapter, netdev);
+	return vmxnet3_tq_xmit(skb, &adapter->tx_queue, adapter, netdev);
 }
 
 
@@ -902,7 +1021,7 @@
 {
 	if (!gdesc->rcd.cnc && adapter->rxcsum) {
 		/* typical case: TCP/UDP over IP and both csums are correct */
-		if ((gdesc->dword[3] & VMXNET3_RCD_CSUM_OK) ==
+		if ((le32_to_cpu(gdesc->dword[3]) & VMXNET3_RCD_CSUM_OK) ==
 							VMXNET3_RCD_CSUM_OK) {
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 			BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp));
@@ -957,8 +1076,12 @@
 	u32 num_rxd = 0;
 	struct Vmxnet3_RxCompDesc *rcd;
 	struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
-
-	rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd;
+#ifdef __BIG_ENDIAN_BITFIELD
+	struct Vmxnet3_RxDesc rxCmdDesc;
+	struct Vmxnet3_RxCompDesc rxComp;
+#endif
+	vmxnet3_getRxComp(rcd, &rq->comp_ring.base[rq->comp_ring.next2proc].rcd,
+			  &rxComp);
 	while (rcd->gen == rq->comp_ring.gen) {
 		struct vmxnet3_rx_buf_info *rbi;
 		struct sk_buff *skb;
@@ -976,11 +1099,12 @@
 
 		idx = rcd->rxdIdx;
 		ring_idx = rcd->rqID == rq->qid ? 0 : 1;
-
-		rxd = &rq->rx_ring[ring_idx].base[idx].rxd;
+		vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd,
+				  &rxCmdDesc);
 		rbi = rq->buf_info[ring_idx] + idx;
 
-		BUG_ON(rxd->addr != rbi->dma_addr || rxd->len != rbi->len);
+		BUG_ON(rxd->addr != rbi->dma_addr ||
+		       rxd->len != rbi->len);
 
 		if (unlikely(rcd->eop && rcd->err)) {
 			vmxnet3_rx_error(rq, rcd, ctx, adapter);
@@ -1078,7 +1202,8 @@
 		}
 
 		vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring);
-		rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd;
+		vmxnet3_getRxComp(rcd,
+		     &rq->comp_ring.base[rq->comp_ring.next2proc].rcd, &rxComp);
 	}
 
 	return num_rxd;
@@ -1094,7 +1219,11 @@
 
 	for (ring_idx = 0; ring_idx < 2; ring_idx++) {
 		for (i = 0; i < rq->rx_ring[ring_idx].size; i++) {
-			rxd = &rq->rx_ring[ring_idx].base[i].rxd;
+#ifdef __BIG_ENDIAN_BITFIELD
+			struct Vmxnet3_RxDesc rxDesc;
+#endif
+			vmxnet3_getRxDesc(rxd,
+				&rq->rx_ring[ring_idx].base[i].rxd, &rxDesc);
 
 			if (rxd->btype == VMXNET3_RXD_BTYPE_HEAD &&
 					rq->buf_info[ring_idx][i].skb) {
@@ -1346,12 +1475,12 @@
 		err = request_irq(adapter->intr.msix_entries[0].vector,
 				  vmxnet3_intr, 0, adapter->netdev->name,
 				  adapter->netdev);
-	} else
-#endif
-	if (adapter->intr.type == VMXNET3_IT_MSI) {
+	} else if (adapter->intr.type == VMXNET3_IT_MSI) {
 		err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0,
 				  adapter->netdev->name, adapter->netdev);
-	} else {
+	} else
+#endif
+	{
 		err = request_irq(adapter->pdev->irq, vmxnet3_intr,
 				  IRQF_SHARED, adapter->netdev->name,
 				  adapter->netdev);
@@ -1412,6 +1541,22 @@
 }
 
 
+inline void set_flag_le16(__le16 *data, u16 flag)
+{
+	*data = cpu_to_le16(le16_to_cpu(*data) | flag);
+}
+
+inline void set_flag_le64(__le64 *data, u64 flag)
+{
+	*data = cpu_to_le64(le64_to_cpu(*data) | flag);
+}
+
+inline void reset_flag_le64(__le64 *data, u64 flag)
+{
+	*data = cpu_to_le64(le64_to_cpu(*data) & ~flag);
+}
+
+
 static void
 vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 {
@@ -1427,7 +1572,8 @@
 			adapter->vlan_grp = grp;
 
 			/* update FEATURES to device */
-			devRead->misc.uptFeatures |= UPT1_F_RXVLAN;
+			set_flag_le64(&devRead->misc.uptFeatures,
+				      UPT1_F_RXVLAN);
 			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 					       VMXNET3_CMD_UPDATE_FEATURE);
 			/*
@@ -1450,7 +1596,7 @@
 		struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
 		adapter->vlan_grp = NULL;
 
-		if (devRead->misc.uptFeatures & UPT1_F_RXVLAN) {
+		if (le64_to_cpu(devRead->misc.uptFeatures) & UPT1_F_RXVLAN) {
 			int i;
 
 			for (i = 0; i < VMXNET3_VFT_SIZE; i++) {
@@ -1463,7 +1609,8 @@
 					       VMXNET3_CMD_UPDATE_VLAN_FILTERS);
 
 			/* update FEATURES to device */
-			devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN;
+			reset_flag_le64(&devRead->misc.uptFeatures,
+					UPT1_F_RXVLAN);
 			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 					       VMXNET3_CMD_UPDATE_FEATURE);
 		}
@@ -1565,9 +1712,10 @@
 			new_table = vmxnet3_copy_mc(netdev);
 			if (new_table) {
 				new_mode |= VMXNET3_RXM_MCAST;
-				rxConf->mfTableLen = netdev->mc_count *
-						     ETH_ALEN;
-				rxConf->mfTablePA = virt_to_phys(new_table);
+				rxConf->mfTableLen = cpu_to_le16(
+						netdev->mc_count * ETH_ALEN);
+				rxConf->mfTablePA = cpu_to_le64(virt_to_phys(
+						    new_table));
 			} else {
 				printk(KERN_INFO "%s: failed to copy mcast list"
 				       ", setting ALL_MULTI\n", netdev->name);
@@ -1582,7 +1730,7 @@
 	}
 
 	if (new_mode != rxConf->rxMode) {
-		rxConf->rxMode = new_mode;
+		rxConf->rxMode = cpu_to_le32(new_mode);
 		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 				       VMXNET3_CMD_UPDATE_RX_MODE);
 	}
@@ -1610,63 +1758,69 @@
 	memset(shared, 0, sizeof(*shared));
 
 	/* driver settings */
-	shared->magic = VMXNET3_REV1_MAGIC;
-	devRead->misc.driverInfo.version = VMXNET3_DRIVER_VERSION_NUM;
+	shared->magic = cpu_to_le32(VMXNET3_REV1_MAGIC);
+	devRead->misc.driverInfo.version = cpu_to_le32(
+						VMXNET3_DRIVER_VERSION_NUM);
 	devRead->misc.driverInfo.gos.gosBits = (sizeof(void *) == 4 ?
 				VMXNET3_GOS_BITS_32 : VMXNET3_GOS_BITS_64);
 	devRead->misc.driverInfo.gos.gosType = VMXNET3_GOS_TYPE_LINUX;
-	devRead->misc.driverInfo.vmxnet3RevSpt = 1;
-	devRead->misc.driverInfo.uptVerSpt = 1;
+	*((u32 *)&devRead->misc.driverInfo.gos) = cpu_to_le32(
+				*((u32 *)&devRead->misc.driverInfo.gos));
+	devRead->misc.driverInfo.vmxnet3RevSpt = cpu_to_le32(1);
+	devRead->misc.driverInfo.uptVerSpt = cpu_to_le32(1);
 
-	devRead->misc.ddPA = virt_to_phys(adapter);
-	devRead->misc.ddLen = sizeof(struct vmxnet3_adapter);
+	devRead->misc.ddPA = cpu_to_le64(virt_to_phys(adapter));
+	devRead->misc.ddLen = cpu_to_le32(sizeof(struct vmxnet3_adapter));
 
 	/* set up feature flags */
 	if (adapter->rxcsum)
-		devRead->misc.uptFeatures |= UPT1_F_RXCSUM;
+		set_flag_le64(&devRead->misc.uptFeatures, UPT1_F_RXCSUM);
 
 	if (adapter->lro) {
-		devRead->misc.uptFeatures |= UPT1_F_LRO;
-		devRead->misc.maxNumRxSG = 1 + MAX_SKB_FRAGS;
+		set_flag_le64(&devRead->misc.uptFeatures, UPT1_F_LRO);
+		devRead->misc.maxNumRxSG = cpu_to_le16(1 + MAX_SKB_FRAGS);
 	}
-	if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX)
-			&& adapter->vlan_grp) {
-		devRead->misc.uptFeatures |= UPT1_F_RXVLAN;
+	if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX) &&
+	    adapter->vlan_grp) {
+		set_flag_le64(&devRead->misc.uptFeatures, UPT1_F_RXVLAN);
 	}
 
-	devRead->misc.mtu = adapter->netdev->mtu;
-	devRead->misc.queueDescPA = adapter->queue_desc_pa;
-	devRead->misc.queueDescLen = sizeof(struct Vmxnet3_TxQueueDesc) +
-				     sizeof(struct Vmxnet3_RxQueueDesc);
+	devRead->misc.mtu = cpu_to_le32(adapter->netdev->mtu);
+	devRead->misc.queueDescPA = cpu_to_le64(adapter->queue_desc_pa);
+	devRead->misc.queueDescLen = cpu_to_le32(
+				     sizeof(struct Vmxnet3_TxQueueDesc) +
+				     sizeof(struct Vmxnet3_RxQueueDesc));
 
 	/* tx queue settings */
 	BUG_ON(adapter->tx_queue.tx_ring.base == NULL);
 
 	devRead->misc.numTxQueues = 1;
 	tqc = &adapter->tqd_start->conf;
-	tqc->txRingBasePA   = adapter->tx_queue.tx_ring.basePA;
-	tqc->dataRingBasePA = adapter->tx_queue.data_ring.basePA;
-	tqc->compRingBasePA = adapter->tx_queue.comp_ring.basePA;
-	tqc->ddPA           = virt_to_phys(adapter->tx_queue.buf_info);
-	tqc->txRingSize     = adapter->tx_queue.tx_ring.size;
-	tqc->dataRingSize   = adapter->tx_queue.data_ring.size;
-	tqc->compRingSize   = adapter->tx_queue.comp_ring.size;
-	tqc->ddLen          = sizeof(struct vmxnet3_tx_buf_info) *
-			      tqc->txRingSize;
+	tqc->txRingBasePA   = cpu_to_le64(adapter->tx_queue.tx_ring.basePA);
+	tqc->dataRingBasePA = cpu_to_le64(adapter->tx_queue.data_ring.basePA);
+	tqc->compRingBasePA = cpu_to_le64(adapter->tx_queue.comp_ring.basePA);
+	tqc->ddPA           = cpu_to_le64(virt_to_phys(
+						adapter->tx_queue.buf_info));
+	tqc->txRingSize     = cpu_to_le32(adapter->tx_queue.tx_ring.size);
+	tqc->dataRingSize   = cpu_to_le32(adapter->tx_queue.data_ring.size);
+	tqc->compRingSize   = cpu_to_le32(adapter->tx_queue.comp_ring.size);
+	tqc->ddLen          = cpu_to_le32(sizeof(struct vmxnet3_tx_buf_info) *
+			      tqc->txRingSize);
 	tqc->intrIdx        = adapter->tx_queue.comp_ring.intr_idx;
 
 	/* rx queue settings */
 	devRead->misc.numRxQueues = 1;
 	rqc = &adapter->rqd_start->conf;
-	rqc->rxRingBasePA[0] = adapter->rx_queue.rx_ring[0].basePA;
-	rqc->rxRingBasePA[1] = adapter->rx_queue.rx_ring[1].basePA;
-	rqc->compRingBasePA  = adapter->rx_queue.comp_ring.basePA;
-	rqc->ddPA            = virt_to_phys(adapter->rx_queue.buf_info);
-	rqc->rxRingSize[0]   = adapter->rx_queue.rx_ring[0].size;
-	rqc->rxRingSize[1]   = adapter->rx_queue.rx_ring[1].size;
-	rqc->compRingSize    = adapter->rx_queue.comp_ring.size;
-	rqc->ddLen           = sizeof(struct vmxnet3_rx_buf_info) *
-			       (rqc->rxRingSize[0] + rqc->rxRingSize[1]);
+	rqc->rxRingBasePA[0] = cpu_to_le64(adapter->rx_queue.rx_ring[0].basePA);
+	rqc->rxRingBasePA[1] = cpu_to_le64(adapter->rx_queue.rx_ring[1].basePA);
+	rqc->compRingBasePA  = cpu_to_le64(adapter->rx_queue.comp_ring.basePA);
+	rqc->ddPA            = cpu_to_le64(virt_to_phys(
+						adapter->rx_queue.buf_info));
+	rqc->rxRingSize[0]   = cpu_to_le32(adapter->rx_queue.rx_ring[0].size);
+	rqc->rxRingSize[1]   = cpu_to_le32(adapter->rx_queue.rx_ring[1].size);
+	rqc->compRingSize    = cpu_to_le32(adapter->rx_queue.comp_ring.size);
+	rqc->ddLen           = cpu_to_le32(sizeof(struct vmxnet3_rx_buf_info) *
+			       (rqc->rxRingSize[0] + rqc->rxRingSize[1]));
 	rqc->intrIdx         = adapter->rx_queue.comp_ring.intr_idx;
 
 	/* intr settings */
@@ -1715,11 +1869,10 @@
 
 	vmxnet3_setup_driver_shared(adapter);
 
-	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL,
-			       VMXNET3_GET_ADDR_LO(adapter->shared_pa));
-	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH,
-			       VMXNET3_GET_ADDR_HI(adapter->shared_pa));
-
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, VMXNET3_GET_ADDR_LO(
+			       adapter->shared_pa));
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, VMXNET3_GET_ADDR_HI(
+			       adapter->shared_pa));
 	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 			       VMXNET3_CMD_ACTIVATE_DEV);
 	ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
@@ -2425,7 +2578,7 @@
 		memcpy(pmConf->filters[i].pattern, netdev->dev_addr, ETH_ALEN);
 		pmConf->filters[i].mask[0] = 0x3F; /* LSB ETH_ALEN bits */
 
-		pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER;
+		set_flag_le16(&pmConf->wakeUpEvents, VMXNET3_PM_WAKEUP_FILTER);
 		i++;
 	}
 
@@ -2467,19 +2620,21 @@
 		pmConf->filters[i].mask[5] = 0x03; /* IPv4 TIP */
 		in_dev_put(in_dev);
 
-		pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER;
+		set_flag_le16(&pmConf->wakeUpEvents, VMXNET3_PM_WAKEUP_FILTER);
 		i++;
 	}
 
 skip_arp:
 	if (adapter->wol & WAKE_MAGIC)
-		pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_MAGIC;
+		set_flag_le16(&pmConf->wakeUpEvents, VMXNET3_PM_WAKEUP_MAGIC);
 
 	pmConf->numFilters = i;
 
-	adapter->shared->devRead.pmConfDesc.confVer = 1;
-	adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf);
-	adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf);
+	adapter->shared->devRead.pmConfDesc.confVer = cpu_to_le32(1);
+	adapter->shared->devRead.pmConfDesc.confLen = cpu_to_le32(sizeof(
+								  *pmConf));
+	adapter->shared->devRead.pmConfDesc.confPA = cpu_to_le64(virt_to_phys(
+								 pmConf));
 
 	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 			       VMXNET3_CMD_UPDATE_PMCFG);
@@ -2510,9 +2665,11 @@
 	pmConf = adapter->pm_conf;
 	memset(pmConf, 0, sizeof(*pmConf));
 
-	adapter->shared->devRead.pmConfDesc.confVer = 1;
-	adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf);
-	adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf);
+	adapter->shared->devRead.pmConfDesc.confVer = cpu_to_le32(1);
+	adapter->shared->devRead.pmConfDesc.confLen = cpu_to_le32(sizeof(
+								  *pmConf));
+	adapter->shared->devRead.pmConfDesc.confPA = cpu_to_le32(virt_to_phys(
+								 pmConf));
 
 	netif_device_attach(netdev);
 	pci_set_power_state(pdev, PCI_D0);
diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index c2c15e4..3935c44 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -50,11 +50,13 @@
 		adapter->rxcsum = val;
 		if (netif_running(netdev)) {
 			if (val)
-				adapter->shared->devRead.misc.uptFeatures |=
-								UPT1_F_RXCSUM;
+				set_flag_le64(
+				&adapter->shared->devRead.misc.uptFeatures,
+				UPT1_F_RXCSUM);
 			else
-				adapter->shared->devRead.misc.uptFeatures &=
-								~UPT1_F_RXCSUM;
+				reset_flag_le64(
+				&adapter->shared->devRead.misc.uptFeatures,
+				UPT1_F_RXCSUM);
 
 			VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 					       VMXNET3_CMD_UPDATE_FEATURE);
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index 3c0d70d..34f392f4 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -27,16 +27,11 @@
 #ifndef _VMXNET3_INT_H
 #define _VMXNET3_INT_H
 
-#include <linux/types.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/pci.h>
-#include <linux/ethtool.h>
 #include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
@@ -335,14 +330,14 @@
 };
 
 #define VMXNET3_WRITE_BAR0_REG(adapter, reg, val)  \
-	writel((val), (adapter)->hw_addr0 + (reg))
+	writel(cpu_to_le32(val), (adapter)->hw_addr0 + (reg))
 #define VMXNET3_READ_BAR0_REG(adapter, reg)        \
-	readl((adapter)->hw_addr0 + (reg))
+	le32_to_cpu(readl((adapter)->hw_addr0 + (reg)))
 
 #define VMXNET3_WRITE_BAR1_REG(adapter, reg, val)  \
-	writel((val), (adapter)->hw_addr1 + (reg))
+	writel(cpu_to_le32(val), (adapter)->hw_addr1 + (reg))
 #define VMXNET3_READ_BAR1_REG(adapter, reg)        \
-	readl((adapter)->hw_addr1 + (reg))
+	le32_to_cpu(readl((adapter)->hw_addr1 + (reg)))
 
 #define VMXNET3_WAKE_QUEUE_THRESHOLD(tq)  (5)
 #define VMXNET3_RX_ALLOC_THRESHOLD(rq, ring_idx, adapter) \
@@ -358,6 +353,10 @@
 #define VMXNET3_MAX_ETH_HDR_SIZE    22
 #define VMXNET3_MAX_SKB_BUF_SIZE    (3*1024)
 
+void set_flag_le16(__le16 *data, u16 flag);
+void set_flag_le64(__le64 *data, u64 flag);
+void reset_flag_le64(__le64 *data, u64 flag);
+
 int
 vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter);
 
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 9e94c4b..32a75fa 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -356,10 +356,8 @@
 
 	switch (host_type) {
 	case VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION:
-		if (func_id == 0) {
-			access_rights |= VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM |
-					VXGE_HW_DEVICE_ACCESS_RIGHT_SRPCIM;
-		}
+		access_rights |= VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM |
+				VXGE_HW_DEVICE_ACCESS_RIGHT_SRPCIM;
 		break;
 	case VXGE_HW_MR_NO_SR_VH0_BASE_FUNCTION:
 		access_rights |= VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM |
@@ -382,6 +380,22 @@
 	return access_rights;
 }
 /*
+ * __vxge_hw_device_is_privilaged
+ * This routine checks if the device function is privilaged or not
+ */
+
+enum vxge_hw_status
+__vxge_hw_device_is_privilaged(u32 host_type, u32 func_id)
+{
+	if (__vxge_hw_device_access_rights_get(host_type,
+		func_id) &
+		VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM)
+		return VXGE_HW_OK;
+	else
+		return VXGE_HW_ERR_PRIVILAGED_OPEARATION;
+}
+
+/*
  * __vxge_hw_device_host_info_get
  * This routine returns the host type assignments
  */
@@ -446,220 +460,6 @@
 	return VXGE_HW_OK;
 }
 
-enum vxge_hw_status
-__vxge_hw_device_is_privilaged(struct __vxge_hw_device *hldev)
-{
-	if ((hldev->host_type == VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION ||
-	hldev->host_type == VXGE_HW_MR_NO_SR_VH0_BASE_FUNCTION ||
-	hldev->host_type == VXGE_HW_NO_MR_SR_VH0_FUNCTION0) &&
-	(hldev->func_id == 0))
-		return VXGE_HW_OK;
-	else
-		return VXGE_HW_ERR_PRIVILAGED_OPEARATION;
-}
-
-/*
- * vxge_hw_wrr_rebalance - Rebalance the RX_WRR and KDFC_WRR calandars.
- * Rebalance the RX_WRR and KDFC_WRR calandars.
- */
-static enum
-vxge_hw_status vxge_hw_wrr_rebalance(struct __vxge_hw_device *hldev)
-{
-	u64 val64;
-	u32 wrr_states[VXGE_HW_WEIGHTED_RR_SERVICE_STATES];
-	u32 i, j, how_often = 1;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	status = __vxge_hw_device_is_privilaged(hldev);
-	if (status != VXGE_HW_OK)
-		goto exit;
-
-	/* Reset the priorities assigned to the WRR arbitration
-	phases for the receive traffic */
-	for (i = 0; i < VXGE_HW_WRR_RING_COUNT; i++)
-		writeq(0, ((&hldev->mrpcim_reg->rx_w_round_robin_0) + i));
-
-	/* Reset the transmit FIFO servicing calendar for FIFOs */
-	for (i = 0; i < VXGE_HW_WRR_FIFO_COUNT; i++) {
-		writeq(0, ((&hldev->mrpcim_reg->kdfc_w_round_robin_0) + i));
-		writeq(0, ((&hldev->mrpcim_reg->kdfc_w_round_robin_20) + i));
-	}
-
-	/* Assign WRR priority  0 for all FIFOs */
-	for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-		writeq(VXGE_HW_KDFC_FIFO_0_CTRL_WRR_NUMBER(0),
-				((&hldev->mrpcim_reg->kdfc_fifo_0_ctrl)  + i));
-
-		writeq(VXGE_HW_KDFC_FIFO_17_CTRL_WRR_NUMBER(0),
-			((&hldev->mrpcim_reg->kdfc_fifo_17_ctrl) + i));
-	}
-
-	/* Reset to service non-offload doorbells */
-	writeq(0, &hldev->mrpcim_reg->kdfc_entry_type_sel_0);
-	writeq(0, &hldev->mrpcim_reg->kdfc_entry_type_sel_1);
-
-	/* Set priority 0 to all receive queues */
-	writeq(0, &hldev->mrpcim_reg->rx_queue_priority_0);
-	writeq(0, &hldev->mrpcim_reg->rx_queue_priority_1);
-	writeq(0, &hldev->mrpcim_reg->rx_queue_priority_2);
-
-	/* Initialize all the slots as unused */
-	for (i = 0; i < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; i++)
-		wrr_states[i] = -1;
-
-	/* Prepare the Fifo service states */
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-
-		if (!hldev->config.vp_config[i].min_bandwidth)
-			continue;
-
-		how_often = VXGE_HW_VPATH_BANDWIDTH_MAX /
-				hldev->config.vp_config[i].min_bandwidth;
-		if (how_often) {
-
-			for (j = 0; j < VXGE_HW_WRR_FIFO_SERVICE_STATES;) {
-				if (wrr_states[j] == -1) {
-					wrr_states[j] = i;
-					/* Make sure each fifo is serviced
-					 * atleast once */
-					if (i == j)
-						j += VXGE_HW_MAX_VIRTUAL_PATHS;
-					else
-						j += how_often;
-				} else
-					j++;
-			}
-		}
-	}
-
-	/* Fill the unused slots with 0 */
-	for (j = 0; j < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; j++) {
-		if (wrr_states[j] == -1)
-			wrr_states[j] = 0;
-	}
-
-	/* Assign WRR priority number for FIFOs */
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-		writeq(VXGE_HW_KDFC_FIFO_0_CTRL_WRR_NUMBER(i),
-				((&hldev->mrpcim_reg->kdfc_fifo_0_ctrl) + i));
-
-		writeq(VXGE_HW_KDFC_FIFO_17_CTRL_WRR_NUMBER(i),
-			((&hldev->mrpcim_reg->kdfc_fifo_17_ctrl) + i));
-	}
-
-	/* Modify the servicing algorithm applied to the 3 types of doorbells.
-	i.e, none-offload, message and offload */
-	writeq(VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_0(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_1(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_2(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_3(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_4(1) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_5(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_6(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_7(0),
-				&hldev->mrpcim_reg->kdfc_entry_type_sel_0);
-
-	writeq(VXGE_HW_KDFC_ENTRY_TYPE_SEL_1_NUMBER_8(1),
-				&hldev->mrpcim_reg->kdfc_entry_type_sel_1);
-
-	for (i = 0, j = 0; i < VXGE_HW_WRR_FIFO_COUNT; i++) {
-
-		val64 = VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_0(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_1(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_2(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_3(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_4(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_5(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_6(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_7(wrr_states[j++]);
-
-		writeq(val64, (&hldev->mrpcim_reg->kdfc_w_round_robin_0 + i));
-		writeq(val64, (&hldev->mrpcim_reg->kdfc_w_round_robin_20 + i));
-	}
-
-	/* Set up the priorities assigned to receive queues */
-	writeq(VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_0(0) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_1(1) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_2(2) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_3(3) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_4(4) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_5(5) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_6(6) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_7(7),
-			&hldev->mrpcim_reg->rx_queue_priority_0);
-
-	writeq(VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_8(8) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_9(9) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_10(10) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_11(11) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_12(12) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_13(13) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_14(14) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_15(15),
-			&hldev->mrpcim_reg->rx_queue_priority_1);
-
-	writeq(VXGE_HW_RX_QUEUE_PRIORITY_2_RX_Q_NUMBER_16(16),
-				&hldev->mrpcim_reg->rx_queue_priority_2);
-
-	/* Initialize all the slots as unused */
-	for (i = 0; i < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; i++)
-		wrr_states[i] = -1;
-
-	/* Prepare the Ring service states */
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-
-		if (!hldev->config.vp_config[i].min_bandwidth)
-			continue;
-
-		how_often = VXGE_HW_VPATH_BANDWIDTH_MAX /
-				hldev->config.vp_config[i].min_bandwidth;
-
-		if (how_often) {
-			for (j = 0; j < VXGE_HW_WRR_RING_SERVICE_STATES;) {
-				if (wrr_states[j] == -1) {
-					wrr_states[j] = i;
-					/* Make sure each ring is
-					 * serviced atleast once */
-					if (i == j)
-						j += VXGE_HW_MAX_VIRTUAL_PATHS;
-					else
-						j += how_often;
-				} else
-					j++;
-			}
-		}
-	}
-
-	/* Fill the unused slots with 0 */
-	for (j = 0; j < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; j++) {
-		if (wrr_states[j] == -1)
-			wrr_states[j] = 0;
-	}
-
-	for (i = 0, j = 0; i < VXGE_HW_WRR_RING_COUNT; i++) {
-		val64 =  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_0(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_1(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_2(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_3(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_4(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_5(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_6(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_7(
-				wrr_states[j++]);
-
-		writeq(val64, ((&hldev->mrpcim_reg->rx_w_round_robin_0) + i));
-	}
-exit:
-	return status;
-}
-
 /*
  * __vxge_hw_device_initialize
  * Initialize Titan-V hardware.
@@ -668,14 +468,14 @@
 {
 	enum vxge_hw_status status = VXGE_HW_OK;
 
-	if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev)) {
+	if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev->host_type,
+				hldev->func_id)) {
 		/* Validate the pci-e link width and speed */
 		status = __vxge_hw_verify_pci_e_info(hldev);
 		if (status != VXGE_HW_OK)
 			goto exit;
 	}
 
-	vxge_hw_wrr_rebalance(hldev);
 exit:
 	return status;
 }
@@ -953,7 +753,8 @@
 	u64 val64;
 	enum vxge_hw_status status = VXGE_HW_OK;
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -990,7 +791,8 @@
 
 	val64 = (u64 *)aggr_stats;
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -1023,7 +825,8 @@
 	u32 offset = 0x0;
 	val64 = (u64 *) port_stats;
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -1221,7 +1024,8 @@
 		goto exit;
 	}
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -2353,6 +2157,28 @@
 }
 
 /*
+ * vxge_hw_vpath_strip_fcs_check - Check for FCS strip.
+ */
+enum vxge_hw_status
+vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask)
+{
+	struct vxge_hw_vpmgmt_reg       __iomem *vpmgmt_reg;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	int i = 0, j = 0;
+
+	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
+		if (!((vpath_mask) & vxge_mBIT(i)))
+			continue;
+		vpmgmt_reg = hldev->vpmgmt_reg[i];
+		for (j = 0; j < VXGE_HW_MAC_MAX_MAC_PORT_ID; j++) {
+			if (readq(&vpmgmt_reg->rxmac_cfg0_port_vpmgmt_clone[j])
+			& VXGE_HW_RXMAC_CFG0_PORT_VPMGMT_CLONE_STRIP_FCS)
+				return VXGE_HW_FAIL;
+		}
+	}
+	return status;
+}
+/*
  * vxge_hw_mgmt_reg_Write - Write Titan register.
  */
 enum vxge_hw_status
@@ -4056,6 +3882,30 @@
 	return status;
 }
 
+void
+vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id)
+{
+	struct __vxge_hw_virtualpath *vpath;
+	struct vxge_hw_vpath_reg __iomem *vp_reg;
+	struct vxge_hw_vp_config *config;
+	u64 val64;
+
+	vpath = &hldev->virtual_paths[vp_id];
+	vp_reg = vpath->vp_reg;
+	config = vpath->vp_config;
+
+	if (config->fifo.enable == VXGE_HW_FIFO_ENABLE) {
+		val64 = readq(&vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
+
+		if (config->tti.timer_ci_en != VXGE_HW_TIM_TIMER_CI_ENABLE) {
+			config->tti.timer_ci_en = VXGE_HW_TIM_TIMER_CI_ENABLE;
+			val64 |= VXGE_HW_TIM_CFG1_INT_NUM_TIMER_CI;
+			writeq(val64,
+			&vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
+		}
+	}
+	return;
+}
 /*
  * __vxge_hw_vpath_initialize
  * This routine is the final phase of init which initializes the
@@ -4098,8 +3948,6 @@
 	if (status != VXGE_HW_OK)
 		goto exit;
 
-	writeq(0, &vp_reg->gendma_int);
-
 	val64 = readq(&vp_reg->rtdma_rd_optimization_ctrl);
 
 	/* Get MRRS value from device control */
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index 3e94f0c..e7877df 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -2201,6 +2201,8 @@
 enum vxge_hw_status
 __vxge_hw_vpath_reset_check(struct __vxge_hw_virtualpath *vpath);
 
+enum vxge_hw_status
+vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask);
 /**
  * vxge_debug
  * @level: level of debug verbosity.
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 068d7a9..f1c4b2a 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -2435,7 +2435,6 @@
 	int ret = 0;
 #ifdef CONFIG_PCI_MSI
 	int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
-	u64 function_mode = vdev->config.device_hw_info.function_mode;
 	int pci_fun = PCI_FUNC(vdev->pdev->devfn);
 
 	if (vdev->config.intr_type == MSI_X)
@@ -2444,20 +2443,9 @@
 	if (ret) {
 		vxge_debug_init(VXGE_ERR,
 			"%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME);
-		if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-			test_and_set_bit(__VXGE_STATE_CARD_UP,
-				&driver_config->inta_dev_open))
-			return VXGE_HW_FAIL;
-		else {
-			vxge_debug_init(VXGE_ERR,
-				"%s: Defaulting to INTA", VXGE_DRIVER_NAME);
-			vdev->config.intr_type = INTA;
-			vxge_hw_device_set_intr_type(vdev->devh,
-				VXGE_HW_INTR_MODE_IRQLINE);
-			vxge_close_vpaths(vdev, 1);
-			vdev->no_of_vpath = 1;
-			vdev->stats.vpaths_open = 1;
-		}
+		vxge_debug_init(VXGE_ERR,
+			"%s: Defaulting to INTA", VXGE_DRIVER_NAME);
+		vdev->config.intr_type = INTA;
 	}
 
 	if (vdev->config.intr_type == MSI_X) {
@@ -2505,24 +2493,11 @@
 					"%s: MSIX - %d  Registration failed",
 					vdev->ndev->name, intr_cnt);
 				vxge_rem_msix_isr(vdev);
-				if ((function_mode ==
-					VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-					test_and_set_bit(__VXGE_STATE_CARD_UP,
-						&driver_config->inta_dev_open))
-					return VXGE_HW_FAIL;
-				else {
-					vxge_hw_device_set_intr_type(
-						vdev->devh,
-						VXGE_HW_INTR_MODE_IRQLINE);
-						vdev->config.intr_type = INTA;
-					vxge_debug_init(VXGE_ERR,
-						"%s: Defaulting to INTA"
-						, vdev->ndev->name);
-					vxge_close_vpaths(vdev, 1);
-					vdev->no_of_vpath = 1;
-					vdev->stats.vpaths_open = 1;
+				vdev->config.intr_type = INTA;
+				vxge_debug_init(VXGE_ERR,
+					"%s: Defaulting to INTA"
+					, vdev->ndev->name);
 					goto INTA_MODE;
-				}
 			}
 
 			if (irq_req) {
@@ -2535,9 +2510,9 @@
 			}
 
 			/* Point to next vpath handler */
-			if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0)
-				&& (vp_idx < (vdev->no_of_vpath - 1)))
-					vp_idx++;
+			if (((intr_idx + 1) % VXGE_HW_VPATH_MSIX_ACTIVE == 0) &&
+			    (vp_idx < (vdev->no_of_vpath - 1)))
+				vp_idx++;
 		}
 
 		intr_cnt = vdev->max_vpath_supported * 2;
@@ -2555,23 +2530,11 @@
 				"%s: MSIX - %d Registration failed",
 				vdev->ndev->name, intr_cnt);
 			vxge_rem_msix_isr(vdev);
-			if ((function_mode ==
-				VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-				test_and_set_bit(__VXGE_STATE_CARD_UP,
-						&driver_config->inta_dev_open))
-				return VXGE_HW_FAIL;
-			else {
-				vxge_hw_device_set_intr_type(vdev->devh,
-						VXGE_HW_INTR_MODE_IRQLINE);
-				vdev->config.intr_type = INTA;
-				vxge_debug_init(VXGE_ERR,
-					"%s: Defaulting to INTA",
-					vdev->ndev->name);
-				vxge_close_vpaths(vdev, 1);
-				vdev->no_of_vpath = 1;
-				vdev->stats.vpaths_open = 1;
+			vdev->config.intr_type = INTA;
+			vxge_debug_init(VXGE_ERR,
+				"%s: Defaulting to INTA",
+				vdev->ndev->name);
 				goto INTA_MODE;
-			}
 		}
 
 		vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle,
@@ -2584,6 +2547,10 @@
 	snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge", vdev->ndev->name);
 
 	if (vdev->config.intr_type == INTA) {
+		vxge_hw_device_set_intr_type(vdev->devh,
+			VXGE_HW_INTR_MODE_IRQLINE);
+		vxge_hw_vpath_tti_ci_set(vdev->devh,
+			vdev->vpaths[0].device_id);
 		ret = request_irq((int) vdev->pdev->irq,
 			vxge_isr_napi,
 			IRQF_SHARED, vdev->desc[0], vdev);
@@ -2688,13 +2655,6 @@
 	 * initialized */
 	netif_carrier_off(dev);
 
-	/* Check for another device already opn with INTA */
-	if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-		test_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open)) {
-		ret = -EPERM;
-		goto out0;
-	}
-
 	/* Open VPATHs */
 	status = vxge_open_vpaths(vdev);
 	if (status != VXGE_HW_OK) {
@@ -2983,7 +2943,6 @@
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s: %s:%d  Exiting...", dev->name, __func__, __LINE__);
 
-	clear_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open);
 	clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
 
 	return 0;
@@ -3653,11 +3612,12 @@
 		device_config->vp_config[i].fifo.enable =
 						VXGE_HW_FIFO_ENABLE;
 		device_config->vp_config[i].fifo.max_frags =
-				MAX_SKB_FRAGS;
+				MAX_SKB_FRAGS + 1;
 		device_config->vp_config[i].fifo.memblock_size =
 			VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE;
 
-		txdl_size = MAX_SKB_FRAGS * sizeof(struct vxge_hw_fifo_txd);
+		txdl_size = device_config->vp_config[i].fifo.max_frags *
+				sizeof(struct vxge_hw_fifo_txd);
 		txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size;
 
 		device_config->vp_config[i].fifo.fifo_blocks =
@@ -4088,9 +4048,10 @@
 		driver_config->config_dev_cnt = 0;
 		driver_config->total_dev_cnt = 0;
 		driver_config->g_no_cpus = 0;
-		driver_config->vpath_per_dev = max_config_vpath;
 	}
 
+	driver_config->vpath_per_dev = max_config_vpath;
+
 	driver_config->total_dev_cnt++;
 	if (++driver_config->config_dev_cnt > max_config_dev) {
 		ret = 0;
@@ -4243,6 +4204,15 @@
 			goto _exit3;
 	}
 
+	/* if FCS stripping is not disabled in MAC fail driver load */
+	if (vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask) != VXGE_HW_OK) {
+		vxge_debug_init(VXGE_ERR,
+			"%s: FCS stripping is not disabled in MAC"
+			" failing driver load", VXGE_DRIVER_NAME);
+		ret = -EINVAL;
+		goto _exit4;
+	}
+
 	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
 
 	/* set private device info */
@@ -4387,6 +4357,27 @@
 	}
 
 	kfree(device_config);
+
+	/*
+	 * INTA is shared in multi-function mode. This is unlike the INTA
+	 * implementation in MR mode, where each VH has its own INTA message.
+	 * - INTA is masked (disabled) as long as at least one function sets
+	 * its TITAN_MASK_ALL_INT.ALARM bit.
+	 * - INTA is unmasked (enabled) when all enabled functions have cleared
+	 * their own TITAN_MASK_ALL_INT.ALARM bit.
+	 * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up.
+	 * Though this driver leaves the top level interrupts unmasked while
+	 * leaving the required module interrupt bits masked on exit, there
+	 * could be a rougue driver around that does not follow this procedure
+	 * resulting in a failure to generate interrupts. The following code is
+	 * present to prevent such a failure.
+	 */
+
+	if (ll_config.device_hw_info.function_mode ==
+		VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION)
+		if (vdev->config.intr_type == INTA)
+			vxge_hw_device_unmask_all(hldev);
+
 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
 		vdev->ndev->name, __func__, __LINE__);
 
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/vxge/vxge-main.h
index 9c36b3a..7c83ba4 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/vxge/vxge-main.h
@@ -112,7 +112,6 @@
 struct vxge_drv_config {
 	int config_dev_cnt;
 	int total_dev_cnt;
-	unsigned long inta_dev_open;
 	int g_no_cpus;
 	unsigned int vpath_per_dev;
 };
diff --git a/drivers/net/vxge/vxge-reg.h b/drivers/net/vxge/vxge-reg.h
index 9a3b823..9a0cf8e 100644
--- a/drivers/net/vxge/vxge-reg.h
+++ b/drivers/net/vxge/vxge-reg.h
@@ -4326,10 +4326,6 @@
 /*0x011e0*/	u64	umq_bwr_init_byte;
 #define VXGE_HW_UMQ_BWR_INIT_BYTE_COUNT(val) vxge_vBIT(val, 0, 32)
 /*0x011e8*/	u64	gendma_int;
-#define	VXGE_HW_GENDMA_INT_IMMED_ENABLE	vxge_mBIT(6)
-#define	VXGE_HW_GENDMA_INT_EVENT_ENABLE	vxge_mBIT(7)
-#define VXGE_HW_GENDMA_INT_NUMBER(val) vxge_vBIT(val, 9, 7)
-#define VXGE_HW_GENDMA_INT_BITMAP(val) vxge_vBIT(val, 16, 16)
 /*0x011f0*/	u64	umqdmq_ir_init_notify;
 #define	VXGE_HW_UMQDMQ_IR_INIT_NOTIFY_PULSE	vxge_mBIT(3)
 /*0x011f8*/	u64	dmq_init_notify;
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index fe3ae51..2c012f4 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -295,6 +295,8 @@
 	u64 val64;
 	u32 val32;
 
+	vxge_hw_device_mask_all(hldev);
+
 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 
 		if (!(hldev->vpaths_deployed & vxge_mBIT(i)))
@@ -1232,7 +1234,7 @@
 	vxge_hw_channel_dtr_post(&fifo->channel, txdlh);
 
 	__vxge_hw_non_offload_db_post(fifo,
-		(u64)(size_t)txdl_priv->dma_addr,
+		(u64)txdl_priv->dma_addr,
 		txdl_priv->frags - 1,
 		fifo->no_snoop_bits);
 
@@ -1961,14 +1963,14 @@
 			val64 = readq(&vp_reg->asic_ntwk_vp_err_reg);
 
 			if (((val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT) &&
-			    (!(val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT) &&
+			     (!(val64 &
 				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK))) ||
 			    ((val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR)
-				&& (!(val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR) &&
+			     (!(val64 &
 				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR)
-			))) {
+				     ))) {
 				sw_stats->error_stats.network_sustained_fault++;
 
 				writeq(
@@ -1981,14 +1983,14 @@
 			}
 
 			if (((val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK) &&
-			    (!(val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK) &&
+			     (!(val64 &
 				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT))) ||
 			    ((val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR)
-				&& (!(val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR) &&
+			     (!(val64 &
 				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR)
-			))) {
+				     ))) {
 
 				sw_stats->error_stats.network_sustained_ok++;
 
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 461742b..861c853 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -2389,6 +2389,8 @@
 
 int
 vxge_hw_channel_dtr_count(struct __vxge_hw_channel *channel);
+void
+vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id);
 
 /* ========================== PRIVATE API ================================= */
 
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index 8fbce75..77c2a75 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -17,7 +17,7 @@
 
 #define VXGE_VERSION_MAJOR	"2"
 #define VXGE_VERSION_MINOR	"0"
-#define VXGE_VERSION_FIX	"5"
-#define VXGE_VERSION_BUILD	"18053"
+#define VXGE_VERSION_FIX	"6"
+#define VXGE_VERSION_BUILD	"18937"
 #define VXGE_VERSION_FOR	"k"
 #endif
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index e2c33c0..b36bf96 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -297,8 +297,8 @@
 static unsigned int cosa_poll(struct file *file, poll_table *poll);
 static int cosa_open(struct inode *inode, struct file *file);
 static int cosa_release(struct inode *inode, struct file *file);
-static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg);
 #ifdef COSA_FASYNC_WORKING
 static int cosa_fasync(struct inode *inode, struct file *file, int on);
 #endif
@@ -309,7 +309,7 @@
 	.read		= cosa_read,
 	.write		= cosa_write,
 	.poll		= cosa_poll,
-	.ioctl		= cosa_chardev_ioctl,
+	.unlocked_ioctl	= cosa_chardev_ioctl,
 	.open		= cosa_open,
 	.release	= cosa_release,
 #ifdef COSA_FASYNC_WORKING
@@ -907,6 +907,7 @@
 			current->state = TASK_RUNNING;
 			chan->tx_status = 1;
 			spin_unlock_irqrestore(&cosa->lock, flags);
+			up(&chan->wsem);
 			return -ERESTARTSYS;
 		}
 	}
@@ -1204,12 +1205,18 @@
 	return hdlc_ioctl(dev, ifr, cmd);
 }
 
-static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	struct channel_data *channel = file->private_data;
-	struct cosa_data *cosa = channel->cosa;
-	return cosa_ioctl_common(cosa, channel, cmd, arg);
+	struct cosa_data *cosa;
+	long ret;
+
+	lock_kernel();
+	cosa = channel->cosa;
+	ret = cosa_ioctl_common(cosa, channel, cmd, arg);
+	unlock_kernel();
+	return ret;
 }
 
 
diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c
index 15d353f..421d071 100644
--- a/drivers/net/wan/dlci.c
+++ b/drivers/net/wan/dlci.c
@@ -77,7 +77,7 @@
 	dlp = netdev_priv(dev);
 
 	hdr.control = FRAD_I_UI;
-	switch(type)
+	switch (type)
 	{
 		case ETH_P_IP:
 			hdr.IP_NLPID = FRAD_P_IP;
@@ -130,7 +130,7 @@
 		dev->stats.rx_errors++;
 	}
 	else
-		switch(hdr->IP_NLPID)
+		switch (hdr->IP_NLPID)
 		{
 			case FRAD_P_PADDING:
 				if (hdr->NLPID != FRAD_P_SNAP)
@@ -208,7 +208,7 @@
 
 	if (!get)
 	{
-		if(copy_from_user(&config, conf, sizeof(struct dlci_conf)))
+		if (copy_from_user(&config, conf, sizeof(struct dlci_conf)))
 			return -EFAULT;
 		if (config.flags & ~DLCI_VALID_FLAGS)
 			return(-EINVAL);
@@ -222,7 +222,7 @@
 
 	if (get)
 	{
-		if(copy_to_user(conf, &dlp->config, sizeof(struct dlci_conf)))
+		if (copy_to_user(conf, &dlp->config, sizeof(struct dlci_conf)))
 			return -EFAULT;
 	}
 
@@ -238,7 +238,7 @@
 
 	dlp = netdev_priv(dev);
 
-	switch(cmd)
+	switch (cmd)
 	{
 		case DLCI_GET_SLAVE:
 			if (!*(short *)(dev->dev_addr))
@@ -417,7 +417,7 @@
 	if (!capable(CAP_NET_ADMIN))
 		return(-EPERM);
 
-	if(copy_from_user(&add, arg, sizeof(struct dlci_add)))
+	if (copy_from_user(&add, arg, sizeof(struct dlci_add)))
 		return -EFAULT;
 
 	switch (cmd)
@@ -426,7 +426,7 @@
 			err = dlci_add(&add);
 
 			if (!err)
-				if(copy_to_user(arg, &add, sizeof(struct dlci_add)))
+				if (copy_to_user(arg, &add, sizeof(struct dlci_add)))
 					return -EFAULT;
 			break;
 
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 07d00b4..3f759da 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -1128,7 +1128,7 @@
         init_timer(&dpriv->timer);
         dpriv->timer.expires = jiffies + 10*HZ;
         dpriv->timer.data = (unsigned long)dev;
-        dpriv->timer.function = &dscc4_timer;
+	dpriv->timer.function = dscc4_timer;
         add_timer(&dpriv->timer);
 	netif_carrier_on(dev);
 
diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c
index beda387..9bc2e36 100644
--- a/drivers/net/wan/farsync.c
+++ b/drivers/net/wan/farsync.c
@@ -1346,8 +1346,8 @@
 
 		dev = port_to_dev(port);
 		while (!(FST_RDB(card, txDescrRing[pi][port->txpos].bits) &
-			 DMA_OWN)
-		       && !(card->dmatx_in_progress)) {
+			 DMA_OWN) &&
+		       !(card->dmatx_in_progress)) {
 			/*
 			 * There doesn't seem to be a txdone event per-se
 			 * We seem to have to deduce it, by checking the DMA_OWN
@@ -1379,8 +1379,8 @@
 				 */
 				FST_WRW(card, txDescrRing[pi][port->txpos].bcnt,
 					cnv_bcnt(skb->len));
-				if ((skb->len < FST_MIN_DMA_LEN)
-				    || (card->family == FST_FAMILY_TXP)) {
+				if ((skb->len < FST_MIN_DMA_LEN) ||
+				    (card->family == FST_FAMILY_TXP)) {
 					/* Enqueue the packet with normal io */
 					memcpy_toio(card->mem +
 						    BUF_OFFSET(txBuffer[pi]
@@ -2030,8 +2030,8 @@
 		/* Sanity check the parameters. We don't support partial writes
 		 * when going over the top
 		 */
-		if (wrthdr.size > FST_MEMSIZE || wrthdr.offset > FST_MEMSIZE
-		    || wrthdr.size + wrthdr.offset > FST_MEMSIZE) {
+		if (wrthdr.size > FST_MEMSIZE || wrthdr.offset > FST_MEMSIZE ||
+		    wrthdr.size + wrthdr.offset > FST_MEMSIZE) {
 			return -ENXIO;
 		}
 
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index cc07236..9937bba 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -57,7 +57,7 @@
 {
 	struct hdlc_device *hdlc = dev_to_hdlc(dev);
 
-	if (dev_net(dev) != &init_net) {
+	if (!net_eq(dev_net(dev), &init_net)) {
 		kfree_skb(skb);
 		return 0;
 	}
@@ -102,7 +102,7 @@
 	unsigned long flags;
 	int on;
 
-	if (dev_net(dev) != &init_net)
+	if (!net_eq(dev_net(dev), &init_net))
 		return NOTIFY_DONE;
 
 	if (!(dev->priv_flags & IFF_WAN_HDLC))
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 840cff7..a7d4fc1 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1214,10 +1214,10 @@
 		return 0;
 
 	case IF_PROTO_FR:
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		if(dev->flags & IFF_UP)
+		if (dev->flags & IFF_UP)
 			return -EBUSY;
 
 		if (copy_from_user(&new_settings, fr_s, size))
@@ -1263,7 +1263,7 @@
 		if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */
 			return -EINVAL;
 
-		if(!capable(CAP_NET_ADMIN))
+		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
 		if (copy_from_user(&pvc, ifr->ifr_settings.ifs_ifsu.fr_pvc,
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 15002c3..74164d2 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -218,7 +218,7 @@
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
 
-	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+	if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
 			"Hostess SV11", sv) < 0) {
 		printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq);
 		goto err_irq;
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 7ea71b3..2ebe935 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -1028,7 +1028,7 @@
     lmc_softreset (sc);
 
     /* Since we have to use PCI bus, this should work on x86,alpha,ppc */
-    if (request_irq (dev->irq, &lmc_interrupt, IRQF_SHARED, dev->name, dev)){
+    if (request_irq (dev->irq, lmc_interrupt, IRQF_SHARED, dev->name, dev)){
         printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
         lmc_trace(dev, "lmc_open irq failed out");
         return -EAGAIN;
diff --git a/drivers/net/wan/n2.c b/drivers/net/wan/n2.c
index 58c6681..5394b51 100644
--- a/drivers/net/wan/n2.c
+++ b/drivers/net/wan/n2.c
@@ -376,7 +376,7 @@
 	}
 	card->io = io;
 
-	if (request_irq(irq, &sca_intr, 0, devname, card)) {
+	if (request_irq(irq, sca_intr, 0, devname, card)) {
 		printk(KERN_ERR "n2: could not allocate IRQ\n");
 		n2_destroy_card(card);
 		return(-EBUSY);
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index 79dabc5..aec4d39 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -514,8 +514,8 @@
 				  RX_BD_ADDR(ch, chan->rx_first_bd));
 	while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) {
 		nchar = cpc_readw(&ptdescr->len);
-		if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT))
-		    || (nchar > BD_DEF_LEN)) {
+		if ((status & (DST_OVR | DST_CRC | DST_RBIT | DST_SHRT | DST_ABT)) ||
+		    (nchar > BD_DEF_LEN)) {
 
 			if (nchar > BD_DEF_LEN)
 				status |= DST_RBIT;
@@ -1428,8 +1428,7 @@
 
 		if (((conf->media == IF_IFACE_T1) &&
 		     (cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_LLBAD) &&
-		     (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN)))
-		    ||
+		     (!(cpc_readb(falcbase + F_REG(FRS1, ch)) & FRS1_PDEN))) ||
 		    ((conf->media == IF_IFACE_E1) &&
 		     (cpc_readb(falcbase + F_REG(RSP, ch)) & RSP_LLBAD))) {
 			pfalc->prbs = 2;
@@ -2285,8 +2284,8 @@
 		if (gis & GIS_ISR1) {
 			isr1 = cpc_readb(falcbase + F_REG(FISR1, ch));
 			if (isr1 & FISR1_XMB) {
-				if ((pfalc->xmb_cause & 2)
-				    && pfalc->multiframe_mode) {
+				if ((pfalc->xmb_cause & 2) &&
+				    pfalc->multiframe_mode) {
 					if (cpc_readb (falcbase + F_REG(FRS0, ch)) & 
 									(FRS0_LOS | FRS0_AIS | FRS0_LFA)) {
 						cpc_writeb(falcbase + F_REG(XSP, ch),
@@ -2639,9 +2638,9 @@
 						!(cpc_readb (scabase + M_REG(CTL, ch)) & CTL_DTR);
 					/* There is no DSR in HD64572 */
 				}
-				if (!arg
-				    || copy_to_user(arg, &pc300status, sizeof(pc300status_t)))
-						return -EINVAL;
+				if (!arg ||
+				    copy_to_user(arg, &pc300status, sizeof(pc300status_t)))
+					return -EINVAL;
 				return 0;
 			}
 
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 1cc24a4..25477b5 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -195,9 +195,9 @@
 static inline int __init
 sbni_isa_probe( struct net_device  *dev )
 {
-	if( dev->base_addr > 0x1ff
-	    &&  request_region( dev->base_addr, SBNI_IO_EXTENT, dev->name )
-	    &&  sbni_probe1( dev, dev->base_addr, dev->irq ) )
+	if( dev->base_addr > 0x1ff &&
+	    request_region( dev->base_addr, SBNI_IO_EXTENT, dev->name ) &&
+	    sbni_probe1( dev, dev->base_addr, dev->irq ) )
 
 		return  0;
 	else {
@@ -286,8 +286,8 @@
 
 	for( i = 0;  netcard_portlist[ i ];  ++i ) {
 		int  ioaddr = netcard_portlist[ i ];
-		if( request_region( ioaddr, SBNI_IO_EXTENT, dev->name )
-		    &&  sbni_probe1( dev, ioaddr, 0 ))
+		if( request_region( ioaddr, SBNI_IO_EXTENT, dev->name ) &&
+		    sbni_probe1( dev, ioaddr, 0 ))
 			return 0;
 	}
 
@@ -306,9 +306,9 @@
 		unsigned long  pci_ioaddr;
 		u16  subsys;
 
-		if( pdev->vendor != SBNI_PCI_VENDOR
-		    &&  pdev->device != SBNI_PCI_DEVICE )
-				continue;
+		if( pdev->vendor != SBNI_PCI_VENDOR &&
+		    pdev->device != SBNI_PCI_DEVICE )
+			continue;
 
 		pci_ioaddr = pci_resource_start( pdev, 0 );
 		pci_irq_line = pdev->irq;
@@ -977,8 +977,8 @@
 	*ack = *framelen & FRAME_ACK_MASK;
 	*is_first = (*framelen & FRAME_FIRST) != 0;
 
-	if( (*framelen &= FRAME_LEN_MASK) < 6
-	    ||  *framelen > SBNI_MAX_FRAME - 3 )
+	if( (*framelen &= FRAME_LEN_MASK) < 6 ||
+	    *framelen > SBNI_MAX_FRAME - 3 )
 		return  0;
 
 	value = inb( ioaddr + DAT );
@@ -1173,10 +1173,10 @@
 	if( dev->base_addr < 0x400 ) {		/* ISA only */
 		struct net_device  **p = sbni_cards;
 		for( ;  *p  &&  p < sbni_cards + SBNI_MAX_NUM_CARDS;  ++p )
-			if( (*p)->irq == dev->irq
-			    &&  ((*p)->base_addr == dev->base_addr + 4
-				 ||  (*p)->base_addr == dev->base_addr - 4)
-			    &&  (*p)->flags & IFF_UP ) {
+			if( (*p)->irq == dev->irq &&
+			    ((*p)->base_addr == dev->base_addr + 4 ||
+			     (*p)->base_addr == dev->base_addr - 4) &&
+			    (*p)->flags & IFF_UP ) {
 
 				((struct net_local *) (netdev_priv(*p)))
 					->second = dev;
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index 2b15a7e..31c41af 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -1457,7 +1457,7 @@
 	}
 
 	err = -EAGAIN;
-	if (request_irq(dev->irq, &sdla_isr, 0, dev->name, dev)) 
+	if (request_irq(dev->irq, sdla_isr, 0, dev->name, dev)) 
 		goto fail;
 
 	if (flp->type == SDLA_S507) {
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 0c525e2..61249f4 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -84,8 +84,7 @@
 	 *	Link layer up.
 	 */
 
-	switch (unit)
-	{
+	switch (unit) {
 		case 0:
 			err = z8530_sync_dma_open(d, slvl->chan);
 			break;
@@ -133,8 +132,7 @@
 	hdlc_close(d);
 	netif_stop_queue(d);
 
-	switch (unit)
-	{
+	switch (unit) {
 		case 0:
 			z8530_sync_dma_close(d, slvl->chan);
 			break;
@@ -266,7 +264,7 @@
 	/* We want a fast IRQ for this device. Actually we'd like an even faster
 	   IRQ ;) - This is one driver RtLinux is made for */
 
-	if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED,
+	if (request_irq(irq, z8530_interrupt, IRQF_DISABLED,
 			"SeaLevel", dev) < 0) {
 		printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
 		goto err_request_irq;
@@ -342,8 +340,7 @@
 
 	z8530_shutdown(&b->board);
 
-	for (u = 0; u < 2; u++)
-	{
+	for (u = 0; u < 2; u++) {
 		struct net_device *d = b->dev[u].chan->netdevice;
 		unregister_hdlc_device(d);
 		free_netdev(d);
@@ -391,7 +388,7 @@
 
 static void __exit slvl_cleanup_module(void)
 {
-	if(slvl_unit)
+	if (slvl_unit)
 		slvl_shutdown(slvl_unit);
 }
 
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index 2794504..b9f520b 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -33,6 +33,7 @@
 #include <linux/lapb.h>
 #include <linux/init.h>
 #include <linux/rtnetlink.h>
+#include <linux/compat.h>
 #include "x25_asy.h"
 
 #include <net/x25device.h>
@@ -656,8 +657,8 @@
 
 	switch (s) {
 	case X25_END:
-		if (!test_and_clear_bit(SLF_ERROR, &sl->flags)
-			&& sl->rcount > 2)
+		if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
+		    sl->rcount > 2)
 			x25_asy_bump(sl);
 		clear_bit(SLF_ESCAPE, &sl->flags);
 		sl->rcount = 0;
@@ -705,6 +706,21 @@
 	}
 }
 
+#ifdef CONFIG_COMPAT
+static long x25_asy_compat_ioctl(struct tty_struct *tty, struct file *file,
+			 unsigned int cmd,  unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCGIFNAME:
+	case SIOCSIFHWADDR:
+		return x25_asy_ioctl(tty, file, cmd,
+				     (unsigned long)compat_ptr(arg));
+	}
+
+	return -ENOIOCTLCMD;
+}
+#endif
+
 static int x25_asy_open_dev(struct net_device *dev)
 {
 	struct x25_asy *sl = netdev_priv(dev);
@@ -754,6 +770,9 @@
 	.open		= x25_asy_open_tty,
 	.close		= x25_asy_close_tty,
 	.ioctl		= x25_asy_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= x25_asy_compat_ioctl,
+#endif
 	.receive_buf	= x25_asy_receive_buf,
 	.write_wakeup	= x25_asy_write_wakeup,
 };
diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig
index d623b3d..3f70338 100644
--- a/drivers/net/wimax/i2400m/Kconfig
+++ b/drivers/net/wimax/i2400m/Kconfig
@@ -31,6 +31,14 @@
 
 	  If unsure, it is safe to select M (module).
 
+config WIMAX_IWMC3200_SDIO
+	bool "Intel Wireless Multicom WiMAX Connection 3200 over SDIO"
+	depends on WIMAX_I2400M_SDIO
+	select IWMC3200TOP
+	help
+	  Select if you have a device based on the Intel Multicom WiMAX
+          Connection 3200 over SDIO.
+
 config WIMAX_I2400M_DEBUG_LEVEL
 	int "WiMAX i2400m debug level"
 	depends on WIMAX_I2400M
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index 0730868..9449455 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -54,7 +54,7 @@
  *   i2400m_set_init_config()
  *   i2400m_cmd_get_state()
  * i2400m_dev_shutdown()        Called by i2400m_dev_stop()
- *   i2400m->bus_reset()
+ *   i2400m_reset()
  *
  * i2400m_{cmd,get,set}_*()
  *   i2400m_msg_to_dev()
@@ -82,6 +82,13 @@
 #define D_SUBMODULE control
 #include "debug-levels.h"
 
+int i2400m_passive_mode;	/* 0 (passive mode disabled) by default */
+module_param_named(passive_mode, i2400m_passive_mode, int, 0644);
+MODULE_PARM_DESC(passive_mode,
+		 "If true, the driver will not do any device setup "
+		 "and leave it up to user space, who must be properly "
+		 "setup.");
+
 
 /*
  * Return if a TLV is of a give type and size
@@ -263,7 +270,7 @@
 
 	if (status == 0)
 		return 0;
-	if (status > ARRAY_SIZE(ms_to_errno)) {
+	if (status >= ARRAY_SIZE(ms_to_errno)) {
 		str = "unknown status code";
 		result = -EBADR;
 	} else {
@@ -336,7 +343,7 @@
 		/* Huh? just in case, shut it down */
 		dev_err(dev, "HW BUG? unknown state %u: shutting down\n",
 			i2400m_state);
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 		break;
 	};
 	d_fnend(3, dev, "(i2400m %p ss %p [%u]) = void\n",
@@ -1335,6 +1342,8 @@
 	unsigned argc = 0;
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+	if (i2400m_passive_mode)
+		goto out_passive;
 	/* Disable idle mode? (enabled by default) */
 	if (i2400m_idle_mode_disabled) {
 		if (i2400m_le_v1_3(i2400m)) {
@@ -1377,6 +1386,7 @@
 	result = i2400m_set_init_config(i2400m, args, argc);
 	if (result < 0)
 		goto error;
+out_passive:
 	/*
 	 * Update state: Here it just calls a get state; parsing the
 	 * result (System State TLV and RF Status TLV [done in the rx
diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c
index 9b81af3..b1aec3e 100644
--- a/drivers/net/wimax/i2400m/debugfs.c
+++ b/drivers/net/wimax/i2400m/debugfs.c
@@ -214,7 +214,7 @@
 	case I2400M_RT_WARM:
 	case I2400M_RT_COLD:
 	case I2400M_RT_BUS:
-		result = i2400m->bus_reset(i2400m, rt);
+		result = i2400m_reset(i2400m, rt);
 		if (result >= 0)
 			result = 0;
 	default:
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 304f044..96a615f 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -41,8 +41,10 @@
  *     __i2400m_dev_start()
  *
  * i2400m_setup()
+ *   i2400m->bus_setup()
  *   i2400m_bootrom_init()
  *   register_netdev()
+ *   wimax_dev_add()
  *   i2400m_dev_start()
  *     __i2400m_dev_start()
  *       i2400m_dev_bootstrap()
@@ -50,15 +52,15 @@
  *       i2400m->bus_dev_start()
  *       i2400m_firmware_check()
  *       i2400m_check_mac_addr()
- *   wimax_dev_add()
  *
  * i2400m_release()
- *   wimax_dev_rm()
  *   i2400m_dev_stop()
  *     __i2400m_dev_stop()
  *       i2400m_dev_shutdown()
  *       i2400m->bus_dev_stop()
  *       i2400m_tx_release()
+ *   i2400m->bus_release()
+ *   wimax_dev_rm()
  *   unregister_netdev()
  */
 #include "i2400m.h"
@@ -66,6 +68,7 @@
 #include <linux/wimax/i2400m.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/suspend.h>
 
 #define D_SUBMODULE driver
 #include "debug-levels.h"
@@ -90,76 +93,39 @@
 		 "False by default (so the device is told to do power "
 		 "saving).");
 
-/**
- * i2400m_queue_work - schedule work on a i2400m's queue
- *
- * @i2400m: device descriptor
- *
- * @fn: function to run to execute work. It gets passed a 'struct
- *     work_struct' that is wrapped in a 'struct i2400m_work'. Once
- *     done, you have to (1) i2400m_put(i2400m_work->i2400m) and then
- *     (2) kfree(i2400m_work).
- *
- * @gfp_flags: GFP flags for memory allocation.
- *
- * @pl: pointer to a payload buffer that you want to pass to the _work
- *     function. Use this to pack (for example) a struct with extra
- *     arguments.
- *
- * @pl_size: size of the payload buffer.
- *
- * We do this quite often, so this just saves typing; allocate a
- * wrapper for a i2400m, get a ref to it, pack arguments and launch
- * the work.
- *
- * A usual workflow is:
- *
- * struct my_work_args {
- *         void *something;
- *         int whatever;
- * };
- * ...
- *
- * struct my_work_args my_args = {
- *         .something = FOO,
- *         .whaetever = BLAH
- * };
- * i2400m_queue_work(i2400m, 1, my_work_function, GFP_KERNEL,
- *                   &args, sizeof(args))
- *
- * And now the work function can unpack the arguments and call the
- * real function (or do the job itself):
- *
- * static
- * void my_work_fn((struct work_struct *ws)
- * {
- *         struct i2400m_work *iw =
- *	           container_of(ws, struct i2400m_work, ws);
- *	   struct my_work_args *my_args = (void *) iw->pl;
- *
- *	   my_work(iw->i2400m, my_args->something, my_args->whatevert);
- * }
- */
-int i2400m_queue_work(struct i2400m *i2400m,
-		      void (*fn)(struct work_struct *), gfp_t gfp_flags,
-		      const void *pl, size_t pl_size)
+static char i2400m_debug_params[128];
+module_param_string(debug, i2400m_debug_params, sizeof(i2400m_debug_params),
+		    0644);
+MODULE_PARM_DESC(debug,
+		 "String of space-separated NAME:VALUE pairs, where NAMEs "
+		 "are the different debug submodules and VALUE are the "
+		 "initial debug value to set.");
+
+static char i2400m_barkers_params[128];
+module_param_string(barkers, i2400m_barkers_params,
+		    sizeof(i2400m_barkers_params), 0644);
+MODULE_PARM_DESC(barkers,
+		 "String of comma-separated 32-bit values; each is "
+		 "recognized as the value the device sends as a reboot "
+		 "signal; values are appended to a list--setting one value "
+		 "as zero cleans the existing list and starts a new one.");
+
+static
+struct i2400m_work *__i2400m_work_setup(
+	struct i2400m *i2400m, void (*fn)(struct work_struct *),
+	gfp_t gfp_flags, const void *pl, size_t pl_size)
 {
-	int result;
 	struct i2400m_work *iw;
 
-	BUG_ON(i2400m->work_queue == NULL);
-	result = -ENOMEM;
 	iw = kzalloc(sizeof(*iw) + pl_size, gfp_flags);
 	if (iw == NULL)
-		goto error_kzalloc;
+		return NULL;
 	iw->i2400m = i2400m_get(i2400m);
+	iw->pl_size = pl_size;
 	memcpy(iw->pl, pl, pl_size);
 	INIT_WORK(&iw->ws, fn);
-	result = queue_work(i2400m->work_queue, &iw->ws);
-error_kzalloc:
-	return result;
+	return iw;
 }
-EXPORT_SYMBOL_GPL(i2400m_queue_work);
 
 
 /*
@@ -175,21 +141,19 @@
  * it should not happen.
  */
 int i2400m_schedule_work(struct i2400m *i2400m,
-			 void (*fn)(struct work_struct *), gfp_t gfp_flags)
+			 void (*fn)(struct work_struct *), gfp_t gfp_flags,
+			 const void *pl, size_t pl_size)
 {
 	int result;
 	struct i2400m_work *iw;
 
 	result = -ENOMEM;
-	iw = kzalloc(sizeof(*iw), gfp_flags);
-	if (iw == NULL)
-		goto error_kzalloc;
-	iw->i2400m = i2400m_get(i2400m);
-	INIT_WORK(&iw->ws, fn);
-	result = schedule_work(&iw->ws);
-	if (result == 0)
-		result = -ENXIO;
-error_kzalloc:
+	iw = __i2400m_work_setup(i2400m, fn, gfp_flags, pl, pl_size);
+	if (iw != NULL) {
+		result = schedule_work(&iw->ws);
+		if (WARN_ON(result == 0))
+			result = -ENXIO;
+	}
 	return result;
 }
 
@@ -291,7 +255,7 @@
 	mutex_lock(&i2400m->init_mutex);
 	i2400m->reset_ctx = &ctx;
 	mutex_unlock(&i2400m->init_mutex);
-	result = i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+	result = i2400m_reset(i2400m, I2400M_RT_WARM);
 	if (result < 0)
 		goto out;
 	result = wait_for_completion_timeout(&ctx.completion, 4*HZ);
@@ -420,9 +384,15 @@
 		dev_err(dev, "cannot create workqueue\n");
 		goto error_create_workqueue;
 	}
-	result = i2400m->bus_dev_start(i2400m);
-	if (result < 0)
-		goto error_bus_dev_start;
+	if (i2400m->bus_dev_start) {
+		result = i2400m->bus_dev_start(i2400m);
+		if (result < 0)
+			goto error_bus_dev_start;
+	}
+	i2400m->ready = 1;
+	wmb();		/* see i2400m->ready's documentation  */
+	/* process pending reports from the device */
+	queue_work(i2400m->work_queue, &i2400m->rx_report_ws);
 	result = i2400m_firmware_check(i2400m);	/* fw versions ok? */
 	if (result < 0)
 		goto error_fw_check;
@@ -430,8 +400,6 @@
 	result = i2400m_check_mac_addr(i2400m);
 	if (result < 0)
 		goto error_check_mac_addr;
-	i2400m->ready = 1;
-	wimax_state_change(wimax_dev, WIMAX_ST_UNINITIALIZED);
 	result = i2400m_dev_initialize(i2400m);
 	if (result < 0)
 		goto error_dev_initialize;
@@ -443,8 +411,12 @@
 
 error_dev_initialize:
 error_check_mac_addr:
+	i2400m->ready = 0;
+	wmb();		/* see i2400m->ready's documentation  */
+	flush_workqueue(i2400m->work_queue);
 error_fw_check:
-	i2400m->bus_dev_stop(i2400m);
+	if (i2400m->bus_dev_stop)
+		i2400m->bus_dev_stop(i2400m);
 error_bus_dev_start:
 	destroy_workqueue(i2400m->work_queue);
 error_create_workqueue:
@@ -466,11 +438,15 @@
 static
 int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags)
 {
-	int result;
+	int result = 0;
 	mutex_lock(&i2400m->init_mutex);	/* Well, start the device */
-	result = __i2400m_dev_start(i2400m, bm_flags);
-	if (result >= 0)
-		i2400m->updown = 1;
+	if (i2400m->updown == 0) {
+		result = __i2400m_dev_start(i2400m, bm_flags);
+		if (result >= 0) {
+			i2400m->updown = 1;
+			wmb();	/* see i2400m->updown's documentation */
+		}
+	}
 	mutex_unlock(&i2400m->init_mutex);
 	return result;
 }
@@ -495,9 +471,20 @@
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 	wimax_state_change(wimax_dev, __WIMAX_ST_QUIESCING);
+	i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST);
+	complete(&i2400m->msg_completion);
+	i2400m_net_wake_stop(i2400m);
 	i2400m_dev_shutdown(i2400m);
-	i2400m->ready = 0;
-	i2400m->bus_dev_stop(i2400m);
+	/*
+	 * Make sure no report hooks are running *before* we stop the
+	 * communication infrastructure with the device.
+	 */
+	i2400m->ready = 0;	/* nobody can queue work anymore */
+	wmb();		/* see i2400m->ready's documentation  */
+	flush_workqueue(i2400m->work_queue);
+
+	if (i2400m->bus_dev_stop)
+		i2400m->bus_dev_stop(i2400m);
 	destroy_workqueue(i2400m->work_queue);
 	i2400m_rx_release(i2400m);
 	i2400m_tx_release(i2400m);
@@ -518,12 +505,139 @@
 	if (i2400m->updown) {
 		__i2400m_dev_stop(i2400m);
 		i2400m->updown = 0;
+		wmb();	/* see i2400m->updown's documentation  */
 	}
 	mutex_unlock(&i2400m->init_mutex);
 }
 
 
 /*
+ * Listen to PM events to cache the firmware before suspend/hibernation
+ *
+ * When the device comes out of suspend, it might go into reset and
+ * firmware has to be uploaded again. At resume, most of the times, we
+ * can't load firmware images from disk, so we need to cache it.
+ *
+ * i2400m_fw_cache() will allocate a kobject and attach the firmware
+ * to it; that way we don't have to worry too much about the fw loader
+ * hitting a race condition.
+ *
+ * Note: modus operandi stolen from the Orinoco driver; thx.
+ */
+static
+int i2400m_pm_notifier(struct notifier_block *notifier,
+		       unsigned long pm_event,
+		       void *unused)
+{
+	struct i2400m *i2400m =
+		container_of(notifier, struct i2400m, pm_notifier);
+	struct device *dev = i2400m_dev(i2400m);
+
+	d_fnstart(3, dev, "(i2400m %p pm_event %lx)\n", i2400m, pm_event);
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		i2400m_fw_cache(i2400m);
+		break;
+	case PM_POST_RESTORE:
+		/* Restore from hibernation failed. We need to clean
+		 * up in exactly the same way, so fall through. */
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		i2400m_fw_uncache(i2400m);
+		break;
+
+	case PM_RESTORE_PREPARE:
+	default:
+		break;
+	}
+	d_fnend(3, dev, "(i2400m %p pm_event %lx) = void\n", i2400m, pm_event);
+	return NOTIFY_DONE;
+}
+
+
+/*
+ * pre-reset is called before a device is going on reset
+ *
+ * This has to be followed by a call to i2400m_post_reset(), otherwise
+ * bad things might happen.
+ */
+int i2400m_pre_reset(struct i2400m *i2400m)
+{
+	int result;
+	struct device *dev = i2400m_dev(i2400m);
+
+	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+	d_printf(1, dev, "pre-reset shut down\n");
+
+	result = 0;
+	mutex_lock(&i2400m->init_mutex);
+	if (i2400m->updown) {
+		netif_tx_disable(i2400m->wimax_dev.net_dev);
+		__i2400m_dev_stop(i2400m);
+		result = 0;
+		/* down't set updown to zero -- this way
+		 * post_reset can restore properly */
+	}
+	mutex_unlock(&i2400m->init_mutex);
+	if (i2400m->bus_release)
+		i2400m->bus_release(i2400m);
+	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_pre_reset);
+
+
+/*
+ * Restore device state after a reset
+ *
+ * Do the work needed after a device reset to bring it up to the same
+ * state as it was before the reset.
+ *
+ * NOTE: this requires i2400m->init_mutex taken
+ */
+int i2400m_post_reset(struct i2400m *i2400m)
+{
+	int result = 0;
+	struct device *dev = i2400m_dev(i2400m);
+
+	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+	d_printf(1, dev, "post-reset start\n");
+	if (i2400m->bus_setup) {
+		result = i2400m->bus_setup(i2400m);
+		if (result < 0) {
+			dev_err(dev, "bus-specific setup failed: %d\n",
+				result);
+			goto error_bus_setup;
+		}
+	}
+	mutex_lock(&i2400m->init_mutex);
+	if (i2400m->updown) {
+		result = __i2400m_dev_start(
+			i2400m, I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT);
+		if (result < 0)
+			goto error_dev_start;
+	}
+	mutex_unlock(&i2400m->init_mutex);
+	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+	return result;
+
+error_dev_start:
+	if (i2400m->bus_release)
+		i2400m->bus_release(i2400m);
+error_bus_setup:
+	/* even if the device was up, it could not be recovered, so we
+	 * mark it as down. */
+	i2400m->updown = 0;
+	wmb();		/* see i2400m->updown's documentation  */
+	mutex_unlock(&i2400m->init_mutex);
+	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
+	return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_post_reset);
+
+
+/*
  * The device has rebooted; fix up the device and the driver
  *
  * Tear down the driver communication with the device, reload the
@@ -542,56 +656,69 @@
  *       _stop()], don't do anything, let it fail and handle it.
  *
  * This function is ran always in a thread context
+ *
+ * This function gets passed, as payload to i2400m_work() a 'const
+ * char *' ptr with a "reason" why the reset happened (for messages).
  */
 static
 void __i2400m_dev_reset_handle(struct work_struct *ws)
 {
 	int result;
 	struct i2400m_work *iw = container_of(ws, struct i2400m_work, ws);
+	const char *reason;
 	struct i2400m *i2400m = iw->i2400m;
 	struct device *dev = i2400m_dev(i2400m);
-	enum wimax_st wimax_state;
 	struct i2400m_reset_ctx *ctx = i2400m->reset_ctx;
 
-	d_fnstart(3, dev, "(ws %p i2400m %p)\n", ws, i2400m);
+	if (WARN_ON(iw->pl_size != sizeof(reason)))
+		reason = "SW BUG: reason n/a";
+	else
+		memcpy(&reason, iw->pl, sizeof(reason));
+
+	d_fnstart(3, dev, "(ws %p i2400m %p reason %s)\n", ws, i2400m, reason);
+
 	result = 0;
 	if (mutex_trylock(&i2400m->init_mutex) == 0) {
 		/* We are still in i2400m_dev_start() [let it fail] or
 		 * i2400m_dev_stop() [we are shutting down anyway, so
 		 * ignore it] or we are resetting somewhere else. */
-		dev_err(dev, "device rebooted\n");
+		dev_err(dev, "device rebooted somewhere else?\n");
 		i2400m_msg_to_dev_cancel_wait(i2400m, -EL3RST);
 		complete(&i2400m->msg_completion);
 		goto out;
 	}
-	wimax_state = wimax_state_get(&i2400m->wimax_dev);
-	if (wimax_state < WIMAX_ST_UNINITIALIZED) {
-		dev_info(dev, "device rebooted: it is down, ignoring\n");
-		goto out_unlock;	/* ifconfig up/down wasn't called */
+	if (i2400m->updown == 0)  {
+		dev_info(dev, "%s: device is down, doing nothing\n", reason);
+		goto out_unlock;
 	}
-	dev_err(dev, "device rebooted: reinitializing driver\n");
+	dev_err(dev, "%s: reinitializing driver\n", reason);
 	__i2400m_dev_stop(i2400m);
-	i2400m->updown = 0;
 	result = __i2400m_dev_start(i2400m,
 				    I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT);
 	if (result < 0) {
-		dev_err(dev, "device reboot: cannot start the device: %d\n",
-			result);
-		result = i2400m->bus_reset(i2400m, I2400M_RT_BUS);
-		if (result >= 0)
-			result = -ENODEV;
-	} else
-		i2400m->updown = 1;
+		i2400m->updown = 0;
+		wmb();		/* see i2400m->updown's documentation  */
+		dev_err(dev, "%s: cannot start the device: %d\n",
+			reason, result);
+		result = -EUCLEAN;
+	}
 out_unlock:
 	if (i2400m->reset_ctx) {
 		ctx->result = result;
 		complete(&ctx->completion);
 	}
 	mutex_unlock(&i2400m->init_mutex);
+	if (result == -EUCLEAN) {
+		/* ops, need to clean up [w/ init_mutex not held] */
+		result = i2400m_reset(i2400m, I2400M_RT_BUS);
+		if (result >= 0)
+			result = -ENODEV;
+	}
 out:
 	i2400m_put(i2400m);
 	kfree(iw);
-	d_fnend(3, dev, "(ws %p i2400m %p) = void\n", ws, i2400m);
+	d_fnend(3, dev, "(ws %p i2400m %p reason %s) = void\n",
+		ws, i2400m, reason);
 	return;
 }
 
@@ -608,16 +735,104 @@
  * reinitializing the driver to handle the reset, calling into the
  * bus-specific functions ops as needed.
  */
-int i2400m_dev_reset_handle(struct i2400m *i2400m)
+int i2400m_dev_reset_handle(struct i2400m *i2400m, const char *reason)
 {
 	i2400m->boot_mode = 1;
 	wmb();		/* Make sure i2400m_msg_to_dev() sees boot_mode */
 	return i2400m_schedule_work(i2400m, __i2400m_dev_reset_handle,
-				    GFP_ATOMIC);
+				    GFP_ATOMIC, &reason, sizeof(reason));
 }
 EXPORT_SYMBOL_GPL(i2400m_dev_reset_handle);
 
 
+/*
+ * Alloc the command and ack buffers for boot mode
+ *
+ * Get the buffers needed to deal with boot mode messages.  These
+ * buffers need to be allocated before the sdio recieve irq is setup.
+ */
+static
+int i2400m_bm_buf_alloc(struct i2400m *i2400m)
+{
+	int result;
+
+	result = -ENOMEM;
+	i2400m->bm_cmd_buf = kzalloc(I2400M_BM_CMD_BUF_SIZE, GFP_KERNEL);
+	if (i2400m->bm_cmd_buf == NULL)
+		goto error_bm_cmd_kzalloc;
+	i2400m->bm_ack_buf = kzalloc(I2400M_BM_ACK_BUF_SIZE, GFP_KERNEL);
+	if (i2400m->bm_ack_buf == NULL)
+		goto error_bm_ack_buf_kzalloc;
+	return 0;
+
+error_bm_ack_buf_kzalloc:
+	kfree(i2400m->bm_cmd_buf);
+error_bm_cmd_kzalloc:
+	return result;
+}
+
+
+/*
+ * Free boot mode command and ack buffers.
+ */
+static
+void i2400m_bm_buf_free(struct i2400m *i2400m)
+{
+	kfree(i2400m->bm_ack_buf);
+	kfree(i2400m->bm_cmd_buf);
+}
+
+
+/**
+ * i2400m_init - Initialize a 'struct i2400m' from all zeroes
+ *
+ * This is a bus-generic API call.
+ */
+void i2400m_init(struct i2400m *i2400m)
+{
+	wimax_dev_init(&i2400m->wimax_dev);
+
+	i2400m->boot_mode = 1;
+	i2400m->rx_reorder = 1;
+	init_waitqueue_head(&i2400m->state_wq);
+
+	spin_lock_init(&i2400m->tx_lock);
+	i2400m->tx_pl_min = UINT_MAX;
+	i2400m->tx_size_min = UINT_MAX;
+
+	spin_lock_init(&i2400m->rx_lock);
+	i2400m->rx_pl_min = UINT_MAX;
+	i2400m->rx_size_min = UINT_MAX;
+	INIT_LIST_HEAD(&i2400m->rx_reports);
+	INIT_WORK(&i2400m->rx_report_ws, i2400m_report_hook_work);
+
+	mutex_init(&i2400m->msg_mutex);
+	init_completion(&i2400m->msg_completion);
+
+	mutex_init(&i2400m->init_mutex);
+	/* wake_tx_ws is initialized in i2400m_tx_setup() */
+}
+EXPORT_SYMBOL_GPL(i2400m_init);
+
+
+int i2400m_reset(struct i2400m *i2400m, enum i2400m_reset_type rt)
+{
+	struct net_device *net_dev = i2400m->wimax_dev.net_dev;
+
+	/*
+	 * Make sure we stop TXs and down the carrier before
+	 * resetting; this is needed to avoid things like
+	 * i2400m_wake_tx() scheduling stuff in parallel.
+	 */
+	if (net_dev->reg_state == NETREG_REGISTERED) {
+		netif_tx_disable(net_dev);
+		netif_carrier_off(net_dev);
+	}
+	return i2400m->bus_reset(i2400m, rt);
+}
+EXPORT_SYMBOL_GPL(i2400m_reset);
+
+
 /**
  * i2400m_setup - bus-generic setup function for the i2400m device
  *
@@ -625,13 +840,9 @@
  *
  * Returns: 0 if ok, < 0 errno code on error.
  *
- * Initializes the bus-generic parts of the i2400m driver; the
- * bus-specific parts have been initialized, function pointers filled
- * out by the bus-specific probe function.
- *
- * As well, this registers the WiMAX and net device nodes. Once this
- * function returns, the device is operative and has to be ready to
- * receive and send network traffic and WiMAX control operations.
+ * Sets up basic device comunication infrastructure, boots the ROM to
+ * read the MAC address, registers with the WiMAX and network stacks
+ * and then brings up the device.
  */
 int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags)
 {
@@ -645,16 +856,21 @@
 	snprintf(wimax_dev->name, sizeof(wimax_dev->name),
 		 "i2400m-%s:%s", dev->bus->name, dev_name(dev));
 
-	i2400m->bm_cmd_buf = kzalloc(I2400M_BM_CMD_BUF_SIZE, GFP_KERNEL);
-	if (i2400m->bm_cmd_buf == NULL) {
-		dev_err(dev, "cannot allocate USB command buffer\n");
-		goto error_bm_cmd_kzalloc;
+	result = i2400m_bm_buf_alloc(i2400m);
+	if (result < 0) {
+		dev_err(dev, "cannot allocate bootmode scratch buffers\n");
+		goto error_bm_buf_alloc;
 	}
-	i2400m->bm_ack_buf = kzalloc(I2400M_BM_ACK_BUF_SIZE, GFP_KERNEL);
-	if (i2400m->bm_ack_buf == NULL) {
-		dev_err(dev, "cannot allocate USB ack buffer\n");
-		goto error_bm_ack_buf_kzalloc;
+
+	if (i2400m->bus_setup) {
+		result = i2400m->bus_setup(i2400m);
+		if (result < 0) {
+			dev_err(dev, "bus-specific setup failed: %d\n",
+				result);
+			goto error_bus_setup;
+		}
 	}
+
 	result = i2400m_bootrom_init(i2400m, bm_flags);
 	if (result < 0) {
 		dev_err(dev, "read mac addr: bootrom init "
@@ -666,6 +882,9 @@
 		goto error_read_mac_addr;
 	random_ether_addr(i2400m->src_mac_addr);
 
+	i2400m->pm_notifier.notifier_call = i2400m_pm_notifier;
+	register_pm_notifier(&i2400m->pm_notifier);
+
 	result = register_netdev(net_dev);	/* Okey dokey, bring it up */
 	if (result < 0) {
 		dev_err(dev, "cannot register i2400m network device: %d\n",
@@ -674,18 +893,13 @@
 	}
 	netif_carrier_off(net_dev);
 
-	result = i2400m_dev_start(i2400m, bm_flags);
-	if (result < 0)
-		goto error_dev_start;
-
 	i2400m->wimax_dev.op_msg_from_user = i2400m_op_msg_from_user;
 	i2400m->wimax_dev.op_rfkill_sw_toggle = i2400m_op_rfkill_sw_toggle;
 	i2400m->wimax_dev.op_reset = i2400m_op_reset;
+
 	result = wimax_dev_add(&i2400m->wimax_dev, net_dev);
 	if (result < 0)
 		goto error_wimax_dev_add;
-	/* User space needs to do some init stuff */
-	wimax_state_change(wimax_dev, WIMAX_ST_UNINITIALIZED);
 
 	/* Now setup all that requires a registered net and wimax device. */
 	result = sysfs_create_group(&net_dev->dev.kobj, &i2400m_dev_attr_group);
@@ -693,30 +907,37 @@
 		dev_err(dev, "cannot setup i2400m's sysfs: %d\n", result);
 		goto error_sysfs_setup;
 	}
+
 	result = i2400m_debugfs_add(i2400m);
 	if (result < 0) {
 		dev_err(dev, "cannot setup i2400m's debugfs: %d\n", result);
 		goto error_debugfs_setup;
 	}
+
+	result = i2400m_dev_start(i2400m, bm_flags);
+	if (result < 0)
+		goto error_dev_start;
 	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
 	return result;
 
+error_dev_start:
+	i2400m_debugfs_rm(i2400m);
 error_debugfs_setup:
 	sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj,
 			   &i2400m_dev_attr_group);
 error_sysfs_setup:
 	wimax_dev_rm(&i2400m->wimax_dev);
 error_wimax_dev_add:
-	i2400m_dev_stop(i2400m);
-error_dev_start:
 	unregister_netdev(net_dev);
 error_register_netdev:
+	unregister_pm_notifier(&i2400m->pm_notifier);
 error_read_mac_addr:
 error_bootrom_init:
-	kfree(i2400m->bm_ack_buf);
-error_bm_ack_buf_kzalloc:
-	kfree(i2400m->bm_cmd_buf);
-error_bm_cmd_kzalloc:
+	if (i2400m->bus_release)
+		i2400m->bus_release(i2400m);
+error_bus_setup:
+	i2400m_bm_buf_free(i2400m);
+error_bm_buf_alloc:
 	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
 	return result;
 }
@@ -735,14 +956,17 @@
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 	netif_stop_queue(i2400m->wimax_dev.net_dev);
 
+	i2400m_dev_stop(i2400m);
+
 	i2400m_debugfs_rm(i2400m);
 	sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj,
 			   &i2400m_dev_attr_group);
 	wimax_dev_rm(&i2400m->wimax_dev);
-	i2400m_dev_stop(i2400m);
 	unregister_netdev(i2400m->wimax_dev.net_dev);
-	kfree(i2400m->bm_ack_buf);
-	kfree(i2400m->bm_cmd_buf);
+	unregister_pm_notifier(&i2400m->pm_notifier);
+	if (i2400m->bus_release)
+		i2400m->bus_release(i2400m);
+	i2400m_bm_buf_free(i2400m);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 }
 EXPORT_SYMBOL_GPL(i2400m_release);
@@ -759,6 +983,7 @@
 	D_SUBMODULE_DEFINE(netdev),
 	D_SUBMODULE_DEFINE(rfkill),
 	D_SUBMODULE_DEFINE(rx),
+	D_SUBMODULE_DEFINE(sysfs),
 	D_SUBMODULE_DEFINE(tx),
 };
 size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
@@ -767,7 +992,9 @@
 static
 int __init i2400m_driver_init(void)
 {
-	return 0;
+	d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400m_debug_params,
+		       "i2400m.debug");
+	return i2400m_barker_db_init(i2400m_barkers_params);
 }
 module_init(i2400m_driver_init);
 
@@ -776,6 +1003,7 @@
 {
 	/* for scheds i2400m_dev_reset_handle() */
 	flush_scheduled_work();
+	i2400m_barker_db_exit();
 	return;
 }
 module_exit(i2400m_driver_exit);
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index e81750e..64cdfeb 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -40,11 +40,9 @@
  *
  * THE PROCEDURE
  *
- * (this is decribed for USB, but for SDIO is similar)
- *
- * The 2400m works in two modes: boot-mode or normal mode. In boot
- * mode we can execute only a handful of commands targeted at
- * uploading the firmware and launching it.
+ * The 2400m and derived devices work in two modes: boot-mode or
+ * normal mode. In boot mode we can execute only a handful of commands
+ * targeted at uploading the firmware and launching it.
  *
  * The 2400m enters boot mode when it is first connected to the
  * system, when it crashes and when you ask it to reboot. There are
@@ -52,18 +50,26 @@
  * firmwares signed with a certain private key, non-signed takes any
  * firmware. Normal hardware takes only signed firmware.
  *
- * Upon entrance to boot mode, the device sends a few zero length
- * packets (ZLPs) on the notification endpoint, then a reboot barker
- * (4 le32 words with value I2400M_{S,N}BOOT_BARKER). We ack it by
- * sending the same barker on the bulk out endpoint. The device acks
- * with a reboot ack barker (4 le32 words with value 0xfeedbabe) and
- * then the device is fully rebooted. At this point we can upload the
- * firmware.
+ * On boot mode, in USB, we write to the device using the bulk out
+ * endpoint and read from it in the notification endpoint. In SDIO we
+ * talk to it via the write address and read from the read address.
+ *
+ * Upon entrance to boot mode, the device sends (preceeded with a few
+ * zero length packets (ZLPs) on the notification endpoint in USB) a
+ * reboot barker (4 le32 words with the same value). We ack it by
+ * sending the same barker to the device. The device acks with a
+ * reboot ack barker (4 le32 words with value I2400M_ACK_BARKER) and
+ * then is fully booted. At this point we can upload the firmware.
+ *
+ * Note that different iterations of the device and EEPROM
+ * configurations will send different [re]boot barkers; these are
+ * collected in i2400m_barker_db along with the firmware
+ * characteristics they require.
  *
  * This process is accomplished by the i2400m_bootrom_init()
  * function. All the device interaction happens through the
  * i2400m_bm_cmd() [boot mode command]. Special return values will
- * indicate if the device resets.
+ * indicate if the device did reset during the process.
  *
  * After this, we read the MAC address and then (if needed)
  * reinitialize the device. We need to read it ahead of time because
@@ -72,11 +78,11 @@
  *
  * We can then upload the firmware file. The file is composed of a BCF
  * header (basic data, keys and signatures) and a list of write
- * commands and payloads. We first upload the header
- * [i2400m_dnload_init()] and then pass the commands and payloads
- * verbatim to the i2400m_bm_cmd() function
- * [i2400m_dnload_bcf()]. Then we tell the device to jump to the new
- * firmware [i2400m_dnload_finalize()].
+ * commands and payloads. Optionally more BCF headers might follow the
+ * main payload. We first upload the header [i2400m_dnload_init()] and
+ * then pass the commands and payloads verbatim to the i2400m_bm_cmd()
+ * function [i2400m_dnload_bcf()]. Then we tell the device to jump to
+ * the new firmware [i2400m_dnload_finalize()].
  *
  * Once firmware is uploaded, we are good to go :)
  *
@@ -99,18 +105,32 @@
  * read an acknolwedgement from it (or an asynchronous notification)
  * from it.
  *
+ * FIRMWARE LOADING
+ *
+ * Note that in some cases, we can't just load a firmware file (for
+ * example, when resuming). For that, we might cache the firmware
+ * file. Thus, when doing the bootstrap, if there is a cache firmware
+ * file, it is used; if not, loading from disk is attempted.
+ *
  * ROADMAP
  *
+ * i2400m_barker_db_init              Called by i2400m_driver_init()
+ *   i2400m_barker_db_add
+ *
+ * i2400m_barker_db_exit              Called by i2400m_driver_exit()
+ *
  * i2400m_dev_bootstrap               Called by __i2400m_dev_start()
  *   request_firmware
- *   i2400m_fw_check
- *   i2400m_fw_dnload
+ *   i2400m_fw_bootstrap
+ *     i2400m_fw_check
+ *       i2400m_fw_hdr_check
+ *     i2400m_fw_dnload
  *   release_firmware
  *
  * i2400m_fw_dnload
  *   i2400m_bootrom_init
  *     i2400m_bm_cmd
- *     i2400m->bus_reset
+ *     i2400m_reset
  *   i2400m_dnload_init
  *     i2400m_dnload_init_signed
  *     i2400m_dnload_init_nonsigned
@@ -125,9 +145,14 @@
  *   i2400m->bus_bm_cmd_send()
  *   i2400m->bus_bm_wait_for_ack
  *   __i2400m_bm_ack_verify
+ *     i2400m_is_boot_barker
  *
  * i2400m_bm_cmd_prepare              Used by bus-drivers to prep
  *                                    commands before sending
+ *
+ * i2400m_pm_notifier                 Called on Power Management events
+ *   i2400m_fw_cache
+ *   i2400m_fw_uncache
  */
 #include <linux/firmware.h>
 #include <linux/sched.h>
@@ -175,6 +200,240 @@
 
 
 /*
+ * Database of known barkers.
+ *
+ * A barker is what the device sends indicating he is ready to be
+ * bootloaded. Different versions of the device will send different
+ * barkers. Depending on the barker, it might mean the device wants
+ * some kind of firmware or the other.
+ */
+static struct i2400m_barker_db {
+	__le32 data[4];
+} *i2400m_barker_db;
+static size_t i2400m_barker_db_used, i2400m_barker_db_size;
+
+
+static
+int i2400m_zrealloc_2x(void **ptr, size_t *_count, size_t el_size,
+		       gfp_t gfp_flags)
+{
+	size_t old_count = *_count,
+		new_count = old_count ? 2 * old_count : 2,
+		old_size = el_size * old_count,
+		new_size = el_size * new_count;
+	void *nptr = krealloc(*ptr, new_size, gfp_flags);
+	if (nptr) {
+		/* zero the other half or the whole thing if old_count
+		 * was zero */
+		if (old_size == 0)
+			memset(nptr, 0, new_size);
+		else
+			memset(nptr + old_size, 0, old_size);
+		*_count = new_count;
+		*ptr = nptr;
+		return 0;
+	} else
+		return -ENOMEM;
+}
+
+
+/*
+ * Add a barker to the database
+ *
+ * This cannot used outside of this module and only at at module_init
+ * time. This is to avoid the need to do locking.
+ */
+static
+int i2400m_barker_db_add(u32 barker_id)
+{
+	int result;
+
+	struct i2400m_barker_db *barker;
+	if (i2400m_barker_db_used >= i2400m_barker_db_size) {
+		result = i2400m_zrealloc_2x(
+			(void **) &i2400m_barker_db, &i2400m_barker_db_size,
+			sizeof(i2400m_barker_db[0]), GFP_KERNEL);
+		if (result < 0)
+			return result;
+	}
+	barker = i2400m_barker_db + i2400m_barker_db_used++;
+	barker->data[0] = le32_to_cpu(barker_id);
+	barker->data[1] = le32_to_cpu(barker_id);
+	barker->data[2] = le32_to_cpu(barker_id);
+	barker->data[3] = le32_to_cpu(barker_id);
+	return 0;
+}
+
+
+void i2400m_barker_db_exit(void)
+{
+	kfree(i2400m_barker_db);
+	i2400m_barker_db = NULL;
+	i2400m_barker_db_size = 0;
+	i2400m_barker_db_used = 0;
+}
+
+
+/*
+ * Helper function to add all the known stable barkers to the barker
+ * database.
+ */
+static
+int i2400m_barker_db_known_barkers(void)
+{
+	int result;
+
+	result = i2400m_barker_db_add(I2400M_NBOOT_BARKER);
+	if (result < 0)
+		goto error_add;
+	result = i2400m_barker_db_add(I2400M_SBOOT_BARKER);
+	if (result < 0)
+		goto error_add;
+	result = i2400m_barker_db_add(I2400M_SBOOT_BARKER_6050);
+	if (result < 0)
+		goto error_add;
+error_add:
+       return result;
+}
+
+
+/*
+ * Initialize the barker database
+ *
+ * This can only be used from the module_init function for this
+ * module; this is to avoid the need to do locking.
+ *
+ * @options: command line argument with extra barkers to
+ *     recognize. This is a comma-separated list of 32-bit hex
+ *     numbers. They are appended to the existing list. Setting 0
+ *     cleans the existing list and starts a new one.
+ */
+int i2400m_barker_db_init(const char *_options)
+{
+	int result;
+	char *options = NULL, *options_orig, *token;
+
+	i2400m_barker_db = NULL;
+	i2400m_barker_db_size = 0;
+	i2400m_barker_db_used = 0;
+
+	result = i2400m_barker_db_known_barkers();
+	if (result < 0)
+		goto error_add;
+	/* parse command line options from i2400m.barkers */
+	if (_options != NULL) {
+		unsigned barker;
+
+		options_orig = kstrdup(_options, GFP_KERNEL);
+		if (options_orig == NULL)
+			goto error_parse;
+		options = options_orig;
+
+		while ((token = strsep(&options, ",")) != NULL) {
+			if (*token == '\0')	/* eat joint commas */
+				continue;
+			if (sscanf(token, "%x", &barker) != 1
+			    || barker > 0xffffffff) {
+				printk(KERN_ERR "%s: can't recognize "
+				       "i2400m.barkers value '%s' as "
+				       "a 32-bit number\n",
+				       __func__, token);
+				result = -EINVAL;
+				goto error_parse;
+			}
+			if (barker == 0) {
+				/* clean list and start new */
+				i2400m_barker_db_exit();
+				continue;
+			}
+			result = i2400m_barker_db_add(barker);
+			if (result < 0)
+				goto error_add;
+		}
+		kfree(options_orig);
+	}
+	return 0;
+
+error_parse:
+error_add:
+	kfree(i2400m_barker_db);
+	return result;
+}
+
+
+/*
+ * Recognize a boot barker
+ *
+ * @buf: buffer where the boot barker.
+ * @buf_size: size of the buffer (has to be 16 bytes). It is passed
+ *     here so the function can check it for the caller.
+ *
+ * Note that as a side effect, upon identifying the obtained boot
+ * barker, this function will set i2400m->barker to point to the right
+ * barker database entry. Subsequent calls to the function will result
+ * in verifying that the same type of boot barker is returned when the
+ * device [re]boots (as long as the same device instance is used).
+ *
+ * Return: 0 if @buf matches a known boot barker. -ENOENT if the
+ *     buffer in @buf doesn't match any boot barker in the database or
+ *     -EILSEQ if the buffer doesn't have the right size.
+ */
+int i2400m_is_boot_barker(struct i2400m *i2400m,
+			  const void *buf, size_t buf_size)
+{
+	int result;
+	struct device *dev = i2400m_dev(i2400m);
+	struct i2400m_barker_db *barker;
+	int i;
+
+	result = -ENOENT;
+	if (buf_size != sizeof(i2400m_barker_db[i].data))
+		return result;
+
+	/* Short circuit if we have already discovered the barker
+	 * associated with the device. */
+	if (i2400m->barker
+	    && !memcmp(buf, i2400m->barker, sizeof(i2400m->barker->data))) {
+		unsigned index = (i2400m->barker - i2400m_barker_db)
+			/ sizeof(*i2400m->barker);
+		d_printf(2, dev, "boot barker cache-confirmed #%u/%08x\n",
+			 index, le32_to_cpu(i2400m->barker->data[0]));
+		return 0;
+	}
+
+	for (i = 0; i < i2400m_barker_db_used; i++) {
+		barker = &i2400m_barker_db[i];
+		BUILD_BUG_ON(sizeof(barker->data) != 16);
+		if (memcmp(buf, barker->data, sizeof(barker->data)))
+			continue;
+
+		if (i2400m->barker == NULL) {
+			i2400m->barker = barker;
+			d_printf(1, dev, "boot barker set to #%u/%08x\n",
+				 i, le32_to_cpu(barker->data[0]));
+			if (barker->data[0] == le32_to_cpu(I2400M_NBOOT_BARKER))
+				i2400m->sboot = 0;
+			else
+				i2400m->sboot = 1;
+		} else if (i2400m->barker != barker) {
+			dev_err(dev, "HW inconsistency: device "
+				"reports a different boot barker "
+				"than set (from %08x to %08x)\n",
+				le32_to_cpu(i2400m->barker->data[0]),
+				le32_to_cpu(barker->data[0]));
+			result = -EIO;
+		} else
+			d_printf(2, dev, "boot barker confirmed #%u/%08x\n",
+				 i, le32_to_cpu(barker->data[0]));
+		result = 0;
+		break;
+	}
+	return result;
+}
+EXPORT_SYMBOL_GPL(i2400m_is_boot_barker);
+
+
+/*
  * Verify the ack data received
  *
  * Given a reply to a boot mode command, chew it and verify everything
@@ -204,20 +463,10 @@
 			opcode, ack_size, sizeof(*ack));
 		goto error_ack_short;
 	}
-	if (ack_size == sizeof(i2400m_NBOOT_BARKER)
-		 && memcmp(ack, i2400m_NBOOT_BARKER, sizeof(*ack)) == 0) {
+	result = i2400m_is_boot_barker(i2400m, ack, ack_size);
+	if (result >= 0) {
 		result = -ERESTARTSYS;
-		i2400m->sboot = 0;
-		d_printf(6, dev, "boot-mode cmd %d: "
-			 "HW non-signed boot barker\n", opcode);
-		goto error_reboot;
-	}
-	if (ack_size == sizeof(i2400m_SBOOT_BARKER)
-		 && memcmp(ack, i2400m_SBOOT_BARKER, sizeof(*ack)) == 0) {
-		result = -ERESTARTSYS;
-		i2400m->sboot = 1;
-		d_printf(6, dev, "boot-mode cmd %d: HW signed reboot barker\n",
-			 opcode);
+		d_printf(6, dev, "boot-mode cmd %d: HW boot barker\n", opcode);
 		goto error_reboot;
 	}
 	if (ack_size == sizeof(i2400m_ACK_BARKER)
@@ -343,7 +592,6 @@
 	BUG_ON(i2400m->boot_mode == 0);
 
 	if (cmd != NULL) {		/* send the command */
-		memcpy(i2400m->bm_cmd_buf, cmd, cmd_size);
 		result = i2400m->bus_bm_cmd_send(i2400m, cmd, cmd_size, flags);
 		if (result < 0)
 			goto error_cmd_send;
@@ -432,8 +680,8 @@
  * Download a BCF file's sections to the device
  *
  * @i2400m: device descriptor
- * @bcf: pointer to firmware data (followed by the payloads). Assumed
- *       verified and consistent.
+ * @bcf: pointer to firmware data (first header followed by the
+ *     payloads). Assumed verified and consistent.
  * @bcf_len: length (in bytes) of the @bcf buffer.
  *
  * Returns: < 0 errno code on error or the offset to the jump instruction.
@@ -472,14 +720,17 @@
 			 "downloading section #%zu (@%zu %zu B) to 0x%08x\n",
 			 section, offset, sizeof(*bh) + data_size,
 			 le32_to_cpu(bh->target_addr));
-		if (i2400m_brh_get_opcode(bh) == I2400M_BRH_SIGNED_JUMP) {
-			/* Secure boot needs to stop here */
-			d_printf(5, dev,  "signed jump found @%zu\n", offset);
+		/*
+		 * We look for JUMP cmd from the bootmode header,
+		 * either I2400M_BRH_SIGNED_JUMP for secure boot
+		 * or I2400M_BRH_JUMP for unsecure boot, the last chunk
+		 * should be the bootmode header with JUMP cmd.
+		 */
+		if (i2400m_brh_get_opcode(bh) == I2400M_BRH_SIGNED_JUMP ||
+			i2400m_brh_get_opcode(bh) == I2400M_BRH_JUMP) {
+			d_printf(5, dev,  "jump found @%zu\n", offset);
 			break;
 		}
-		if (offset + section_size == bcf_len)
-			/* Non-secure boot stops here */
-			break;
 		if (offset + section_size > bcf_len) {
 			dev_err(dev, "fw %s: bad section #%zu, "
 				"end (@%zu) beyond EOF (@%zu)\n",
@@ -510,13 +761,30 @@
 
 
 /*
+ * Indicate if the device emitted a reboot barker that indicates
+ * "signed boot"
+ */
+static
+unsigned i2400m_boot_is_signed(struct i2400m *i2400m)
+{
+	return likely(i2400m->sboot);
+}
+
+
+/*
  * Do the final steps of uploading firmware
  *
+ * @bcf_hdr: BCF header we are actually using
+ * @bcf: pointer to the firmware image (which matches the first header
+ *     that is followed by the actual payloads).
+ * @offset: [byte] offset into @bcf for the command we need to send.
+ *
  * Depending on the boot mode (signed vs non-signed), different
  * actions need to be taken.
  */
 static
 int i2400m_dnload_finalize(struct i2400m *i2400m,
+			   const struct i2400m_bcf_hdr *bcf_hdr,
 			   const struct i2400m_bcf_hdr *bcf, size_t offset)
 {
 	int ret = 0;
@@ -530,10 +798,14 @@
 
 	d_fnstart(3, dev, "offset %zu\n", offset);
 	cmd = (void *) bcf + offset;
-	if (i2400m->sboot == 0) {
+	if (i2400m_boot_is_signed(i2400m) == 0) {
 		struct i2400m_bootrom_header jump_ack;
 		d_printf(1, dev, "unsecure boot, jumping to 0x%08x\n",
 			le32_to_cpu(cmd->target_addr));
+		cmd_buf = i2400m->bm_cmd_buf;
+		memcpy(&cmd_buf->cmd, cmd, sizeof(*cmd));
+		cmd = &cmd_buf->cmd;
+		/* now cmd points to the actual bootrom_header in cmd_buf */
 		i2400m_brh_set_opcode(cmd, I2400M_BRH_JUMP);
 		cmd->data_size = 0;
 		ret = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd),
@@ -544,12 +816,13 @@
 		cmd_buf = i2400m->bm_cmd_buf;
 		memcpy(&cmd_buf->cmd, cmd, sizeof(*cmd));
 		signature_block_offset =
-			sizeof(*bcf)
-			+ le32_to_cpu(bcf->key_size) * sizeof(u32)
-			+ le32_to_cpu(bcf->exponent_size) * sizeof(u32);
+			sizeof(*bcf_hdr)
+			+ le32_to_cpu(bcf_hdr->key_size) * sizeof(u32)
+			+ le32_to_cpu(bcf_hdr->exponent_size) * sizeof(u32);
 		signature_block_size =
-			le32_to_cpu(bcf->modulus_size) * sizeof(u32);
-		memcpy(cmd_buf->cmd_pl, (void *) bcf + signature_block_offset,
+			le32_to_cpu(bcf_hdr->modulus_size) * sizeof(u32);
+		memcpy(cmd_buf->cmd_pl,
+		       (void *) bcf_hdr + signature_block_offset,
 		       signature_block_size);
 		ret = i2400m_bm_cmd(i2400m, &cmd_buf->cmd,
 				    sizeof(cmd_buf->cmd) + signature_block_size,
@@ -565,7 +838,7 @@
  *
  * @i2400m: device descriptor
  * @flags:
- *      I2400M_BRI_SOFT: a reboot notification has been seen
+ *      I2400M_BRI_SOFT: a reboot barker has been seen
  *          already, so don't wait for it.
  *
  *      I2400M_BRI_NO_REBOOT: Don't send a reboot command, but wait
@@ -576,17 +849,15 @@
  *
  *     < 0 errno code on error, 0 if ok.
  *
- *     i2400m->sboot set to 0 for unsecure boot process, 1 for secure
- *     boot process.
- *
  * Description:
  *
  * Tries hard enough to put the device in boot-mode. There are two
  * main phases to this:
  *
  * a. (1) send a reboot command and (2) get a reboot barker
- * b. (1) ack the reboot sending a reboot barker and (2) getting an
- *        ack barker in return
+ *
+ * b. (1) echo/ack the reboot sending the reboot barker back and (2)
+ *        getting an ack barker in return
  *
  * We want to skip (a) in some cases [soft]. The state machine is
  * horrible, but it is basically: on each phase, send what has to be
@@ -594,6 +865,16 @@
  * have to backtrack and retry, so we keep a max tries counter for
  * that.
  *
+ * It sucks because we don't know ahead of time which is going to be
+ * the reboot barker (the device might send different ones depending
+ * on its EEPROM config) and once the device reboots and waits for the
+ * echo/ack reboot barker being sent back, it doesn't understand
+ * anything else. So we can be left at the point where we don't know
+ * what to send to it -- cold reset and bus reset seem to have little
+ * effect. So the function iterates (in this case) through all the
+ * known barkers and tries them all until an ACK is
+ * received. Otherwise, it gives up.
+ *
  * If we get a timeout after sending a warm reset, we do it again.
  */
 int i2400m_bootrom_init(struct i2400m *i2400m, enum i2400m_bri flags)
@@ -602,10 +883,11 @@
 	struct device *dev = i2400m_dev(i2400m);
 	struct i2400m_bootrom_header *cmd;
 	struct i2400m_bootrom_header ack;
-	int count = I2400M_BOOT_RETRIES;
+	int count = i2400m->bus_bm_retries;
 	int ack_timeout_cnt = 1;
+	unsigned i;
 
-	BUILD_BUG_ON(sizeof(*cmd) != sizeof(i2400m_NBOOT_BARKER));
+	BUILD_BUG_ON(sizeof(*cmd) != sizeof(i2400m_barker_db[0].data));
 	BUILD_BUG_ON(sizeof(ack) != sizeof(i2400m_ACK_BARKER));
 
 	d_fnstart(4, dev, "(i2400m %p flags 0x%08x)\n", i2400m, flags);
@@ -614,27 +896,59 @@
 	if (flags & I2400M_BRI_SOFT)
 		goto do_reboot_ack;
 do_reboot:
+	ack_timeout_cnt = 1;
 	if (--count < 0)
 		goto error_timeout;
 	d_printf(4, dev, "device reboot: reboot command [%d # left]\n",
 		 count);
 	if ((flags & I2400M_BRI_NO_REBOOT) == 0)
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 	result = i2400m_bm_cmd(i2400m, NULL, 0, &ack, sizeof(ack),
 			       I2400M_BM_CMD_RAW);
 	flags &= ~I2400M_BRI_NO_REBOOT;
 	switch (result) {
 	case -ERESTARTSYS:
+		/*
+		 * at this point, i2400m_bm_cmd(), through
+		 * __i2400m_bm_ack_process(), has updated
+		 * i2400m->barker and we are good to go.
+		 */
 		d_printf(4, dev, "device reboot: got reboot barker\n");
 		break;
 	case -EISCONN:	/* we don't know how it got here...but we follow it */
 		d_printf(4, dev, "device reboot: got ack barker - whatever\n");
 		goto do_reboot;
-	case -ETIMEDOUT:	/* device has timed out, we might be in boot
-				 * mode already and expecting an ack, let's try
-				 * that */
-		dev_info(dev, "warm reset timed out, trying an ack\n");
-		goto do_reboot_ack;
+	case -ETIMEDOUT:
+		/*
+		 * Device has timed out, we might be in boot mode
+		 * already and expecting an ack; if we don't know what
+		 * the barker is, we just send them all. Cold reset
+		 * and bus reset don't work. Beats me.
+		 */
+		if (i2400m->barker != NULL) {
+			dev_err(dev, "device boot: reboot barker timed out, "
+				"trying (set) %08x echo/ack\n",
+				le32_to_cpu(i2400m->barker->data[0]));
+			goto do_reboot_ack;
+		}
+		for (i = 0; i < i2400m_barker_db_used; i++) {
+			struct i2400m_barker_db *barker = &i2400m_barker_db[i];
+			memcpy(cmd, barker->data, sizeof(barker->data));
+			result = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd),
+					       &ack, sizeof(ack),
+					       I2400M_BM_CMD_RAW);
+			if (result == -EISCONN) {
+				dev_warn(dev, "device boot: got ack barker "
+					 "after sending echo/ack barker "
+					 "#%d/%08x; rebooting j.i.c.\n",
+					 i, le32_to_cpu(barker->data[0]));
+				flags &= ~I2400M_BRI_NO_REBOOT;
+				goto do_reboot;
+			}
+		}
+		dev_err(dev, "device boot: tried all the echo/acks, could "
+			"not get device to respond; giving up");
+		result = -ESHUTDOWN;
 	case -EPROTO:
 	case -ESHUTDOWN:	/* dev is gone */
 	case -EINTR:		/* user cancelled */
@@ -642,6 +956,7 @@
 	default:
 		dev_err(dev, "device reboot: error %d while waiting "
 			"for reboot barker - rebooting\n", result);
+		d_dump(1, dev, &ack, result);
 		goto do_reboot;
 	}
 	/* At this point we ack back with 4 REBOOT barkers and expect
@@ -650,12 +965,7 @@
 	 * notification and report it as -EISCONN. */
 do_reboot_ack:
 	d_printf(4, dev, "device reboot ack: sending ack [%d # left]\n", count);
-	if (i2400m->sboot == 0)
-		memcpy(cmd, i2400m_NBOOT_BARKER,
-		       sizeof(i2400m_NBOOT_BARKER));
-	else
-		memcpy(cmd, i2400m_SBOOT_BARKER,
-		       sizeof(i2400m_SBOOT_BARKER));
+	memcpy(cmd, i2400m->barker->data, sizeof(i2400m->barker->data));
 	result = i2400m_bm_cmd(i2400m, cmd, sizeof(*cmd),
 			       &ack, sizeof(ack), I2400M_BM_CMD_RAW);
 	switch (result) {
@@ -668,10 +978,8 @@
 		d_printf(4, dev, "reboot ack: got ack barker - good\n");
 		break;
 	case -ETIMEDOUT:	/* no response, maybe it is the other type? */
-		if (ack_timeout_cnt-- >= 0) {
-			d_printf(4, dev, "reboot ack timedout: "
-				 "trying the other type?\n");
-			i2400m->sboot = !i2400m->sboot;
+		if (ack_timeout_cnt-- < 0) {
+			d_printf(4, dev, "reboot ack timedout: retrying\n");
 			goto do_reboot_ack;
 		} else {
 			dev_err(dev, "reboot ack timedout too long: "
@@ -839,32 +1147,29 @@
  * (signed or non-signed).
  */
 static
-int i2400m_dnload_init(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf)
+int i2400m_dnload_init(struct i2400m *i2400m,
+		       const struct i2400m_bcf_hdr *bcf_hdr)
 {
 	int result;
 	struct device *dev = i2400m_dev(i2400m);
-	u32 module_id = le32_to_cpu(bcf->module_id);
 
-	if (i2400m->sboot == 0
-	    && (module_id & I2400M_BCF_MOD_ID_POKES) == 0) {
+	if (i2400m_boot_is_signed(i2400m)) {
+		d_printf(1, dev, "signed boot\n");
+		result = i2400m_dnload_init_signed(i2400m, bcf_hdr);
+		if (result == -ERESTARTSYS)
+			return result;
+		if (result < 0)
+			dev_err(dev, "firmware %s: signed boot download "
+				"initialization failed: %d\n",
+				i2400m->fw_name, result);
+	} else {
 		/* non-signed boot process without pokes */
+		d_printf(1, dev, "non-signed boot\n");
 		result = i2400m_dnload_init_nonsigned(i2400m);
 		if (result == -ERESTARTSYS)
 			return result;
 		if (result < 0)
-			dev_err(dev, "fw %s: non-signed download "
-				"initialization failed: %d\n",
-				i2400m->fw_name, result);
-	} else if (i2400m->sboot == 0
-		 && (module_id & I2400M_BCF_MOD_ID_POKES)) {
-		/* non-signed boot process with pokes, nothing to do */
-		result = 0;
-	} else {		 /* signed boot process */
-		result = i2400m_dnload_init_signed(i2400m, bcf);
-		if (result == -ERESTARTSYS)
-			return result;
-		if (result < 0)
-			dev_err(dev, "fw %s: signed boot download "
+			dev_err(dev, "firmware %s: non-signed download "
 				"initialization failed: %d\n",
 				i2400m->fw_name, result);
 	}
@@ -873,74 +1178,201 @@
 
 
 /*
- * Run quick consistency tests on the firmware file
+ * Run consistency tests on the firmware file and load up headers
  *
  * Check for the firmware being made for the i2400m device,
  * etc...These checks are mostly informative, as the device will make
  * them too; but the driver's response is more informative on what
  * went wrong.
+ *
+ * This will also look at all the headers present on the firmware
+ * file, and update i2400m->fw_bcf_hdr to point to them.
  */
 static
-int i2400m_fw_check(struct i2400m *i2400m,
-		    const struct i2400m_bcf_hdr *bcf,
-		    size_t bcf_size)
+int i2400m_fw_hdr_check(struct i2400m *i2400m,
+			const struct i2400m_bcf_hdr *bcf_hdr,
+			size_t index, size_t offset)
 {
-	int result;
 	struct device *dev = i2400m_dev(i2400m);
+
 	unsigned module_type, header_len, major_version, minor_version,
 		module_id, module_vendor, date, size;
 
-	/* Check hard errors */
-	result = -EINVAL;
-	if (bcf_size < sizeof(*bcf)) {	/* big enough header? */
-		dev_err(dev, "firmware %s too short: "
-			"%zu B vs %zu (at least) expected\n",
-			i2400m->fw_name, bcf_size, sizeof(*bcf));
-		goto error;
+	module_type = bcf_hdr->module_type;
+	header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len);
+	major_version = (le32_to_cpu(bcf_hdr->header_version) & 0xffff0000)
+		>> 16;
+	minor_version = le32_to_cpu(bcf_hdr->header_version) & 0x0000ffff;
+	module_id = le32_to_cpu(bcf_hdr->module_id);
+	module_vendor = le32_to_cpu(bcf_hdr->module_vendor);
+	date = le32_to_cpu(bcf_hdr->date);
+	size = sizeof(u32) * le32_to_cpu(bcf_hdr->size);
+
+	d_printf(1, dev, "firmware %s #%zd@%08zx: BCF header "
+		 "type:vendor:id 0x%x:%x:%x v%u.%u (%u/%u B) built %08x\n",
+		 i2400m->fw_name, index, offset,
+		 module_type, module_vendor, module_id,
+		 major_version, minor_version, header_len, size, date);
+
+	/* Hard errors */
+	if (major_version != 1) {
+		dev_err(dev, "firmware %s #%zd@%08zx: major header version "
+			"v%u.%u not supported\n",
+			i2400m->fw_name, index, offset,
+			major_version, minor_version);
+		return -EBADF;
 	}
 
-	module_type = bcf->module_type;
-	header_len = sizeof(u32) * le32_to_cpu(bcf->header_len);
-	major_version = le32_to_cpu(bcf->header_version) & 0xffff0000 >> 16;
-	minor_version = le32_to_cpu(bcf->header_version) & 0x0000ffff;
-	module_id = le32_to_cpu(bcf->module_id);
-	module_vendor = le32_to_cpu(bcf->module_vendor);
-	date = le32_to_cpu(bcf->date);
-	size = sizeof(u32) * le32_to_cpu(bcf->size);
-
-	if (bcf_size != size) {		/* annoyingly paranoid */
-		dev_err(dev, "firmware %s: bad size, got "
-			"%zu B vs %u expected\n",
-			i2400m->fw_name, bcf_size, size);
-		goto error;
-	}
-
-	d_printf(2, dev, "type 0x%x id 0x%x vendor 0x%x; header v%u.%u (%zu B) "
-		 "date %08x (%zu B)\n",
-		 module_type, module_id, module_vendor,
-		 major_version, minor_version, (size_t) header_len,
-		 date, (size_t) size);
-
 	if (module_type != 6) {		/* built for the right hardware? */
-		dev_err(dev, "bad fw %s: unexpected module type 0x%x; "
-			"aborting\n", i2400m->fw_name, module_type);
-		goto error;
+		dev_err(dev, "firmware %s #%zd@%08zx: unexpected module "
+			"type 0x%x; aborting\n",
+			i2400m->fw_name, index, offset,
+			module_type);
+		return -EBADF;
 	}
 
-	/* Check soft-er errors */
-	result = 0;
-	if (module_vendor != 0x8086)
-		dev_err(dev, "bad fw %s? unexpected vendor 0x%04x\n",
-			i2400m->fw_name, module_vendor);
+	if (module_vendor != 0x8086) {
+		dev_err(dev, "firmware %s #%zd@%08zx: unexpected module "
+			"vendor 0x%x; aborting\n",
+			i2400m->fw_name, index, offset, module_vendor);
+		return -EBADF;
+	}
+
 	if (date < 0x20080300)
-		dev_err(dev, "bad fw %s? build date too old %08x\n",
-			i2400m->fw_name, date);
-error:
+		dev_warn(dev, "firmware %s #%zd@%08zx: build date %08x "
+			 "too old; unsupported\n",
+			 i2400m->fw_name, index, offset, date);
+	return 0;
+}
+
+
+/*
+ * Run consistency tests on the firmware file and load up headers
+ *
+ * Check for the firmware being made for the i2400m device,
+ * etc...These checks are mostly informative, as the device will make
+ * them too; but the driver's response is more informative on what
+ * went wrong.
+ *
+ * This will also look at all the headers present on the firmware
+ * file, and update i2400m->fw_hdrs to point to them.
+ */
+static
+int i2400m_fw_check(struct i2400m *i2400m, const void *bcf, size_t bcf_size)
+{
+	int result;
+	struct device *dev = i2400m_dev(i2400m);
+	size_t headers = 0;
+	const struct i2400m_bcf_hdr *bcf_hdr;
+	const void *itr, *next, *top;
+	size_t slots = 0, used_slots = 0;
+
+	for (itr = bcf, top = itr + bcf_size;
+	     itr < top;
+	     headers++, itr = next) {
+		size_t leftover, offset, header_len, size;
+
+		leftover = top - itr;
+		offset = itr - (const void *) bcf;
+		if (leftover <= sizeof(*bcf_hdr)) {
+			dev_err(dev, "firmware %s: %zu B left at @%zx, "
+				"not enough for BCF header\n",
+				i2400m->fw_name, leftover, offset);
+			break;
+		}
+		bcf_hdr = itr;
+		/* Only the first header is supposed to be followed by
+		 * payload */
+		header_len = sizeof(u32) * le32_to_cpu(bcf_hdr->header_len);
+		size = sizeof(u32) * le32_to_cpu(bcf_hdr->size);
+		if (headers == 0)
+			next = itr + size;
+		else
+			next = itr + header_len;
+
+		result = i2400m_fw_hdr_check(i2400m, bcf_hdr, headers, offset);
+		if (result < 0)
+			continue;
+		if (used_slots + 1 >= slots) {
+			/* +1 -> we need to account for the one we'll
+			 * occupy and at least an extra one for
+			 * always being NULL */
+			result = i2400m_zrealloc_2x(
+				(void **) &i2400m->fw_hdrs, &slots,
+				sizeof(i2400m->fw_hdrs[0]),
+				GFP_KERNEL);
+			if (result < 0)
+				goto error_zrealloc;
+		}
+		i2400m->fw_hdrs[used_slots] = bcf_hdr;
+		used_slots++;
+	}
+	if (headers == 0) {
+		dev_err(dev, "firmware %s: no usable headers found\n",
+			i2400m->fw_name);
+		result = -EBADF;
+	} else
+		result = 0;
+error_zrealloc:
 	return result;
 }
 
 
 /*
+ * Match a barker to a BCF header module ID
+ *
+ * The device sends a barker which tells the firmware loader which
+ * header in the BCF file has to be used. This does the matching.
+ */
+static
+unsigned i2400m_bcf_hdr_match(struct i2400m *i2400m,
+			      const struct i2400m_bcf_hdr *bcf_hdr)
+{
+	u32 barker = le32_to_cpu(i2400m->barker->data[0])
+		& 0x7fffffff;
+	u32 module_id = le32_to_cpu(bcf_hdr->module_id)
+		& 0x7fffffff;	/* high bit used for something else */
+
+	/* special case for 5x50 */
+	if (barker == I2400M_SBOOT_BARKER && module_id == 0)
+		return 1;
+	if (module_id == barker)
+		return 1;
+	return 0;
+}
+
+static
+const struct i2400m_bcf_hdr *i2400m_bcf_hdr_find(struct i2400m *i2400m)
+{
+	struct device *dev = i2400m_dev(i2400m);
+	const struct i2400m_bcf_hdr **bcf_itr, *bcf_hdr;
+	unsigned i = 0;
+	u32 barker = le32_to_cpu(i2400m->barker->data[0]);
+
+	d_printf(2, dev, "finding BCF header for barker %08x\n", barker);
+	if (barker == I2400M_NBOOT_BARKER) {
+		bcf_hdr = i2400m->fw_hdrs[0];
+		d_printf(1, dev, "using BCF header #%u/%08x for non-signed "
+			 "barker\n", 0, le32_to_cpu(bcf_hdr->module_id));
+		return bcf_hdr;
+	}
+	for (bcf_itr = i2400m->fw_hdrs; *bcf_itr != NULL; bcf_itr++, i++) {
+		bcf_hdr = *bcf_itr;
+		if (i2400m_bcf_hdr_match(i2400m, bcf_hdr)) {
+			d_printf(1, dev, "hit on BCF hdr #%u/%08x\n",
+				 i, le32_to_cpu(bcf_hdr->module_id));
+			return bcf_hdr;
+		} else
+			d_printf(1, dev, "miss on BCF hdr #%u/%08x\n",
+				 i, le32_to_cpu(bcf_hdr->module_id));
+	}
+	dev_err(dev, "cannot find a matching BCF header for barker %08x\n",
+		barker);
+	return NULL;
+}
+
+
+/*
  * Download the firmware to the device
  *
  * @i2400m: device descriptor
@@ -956,14 +1388,16 @@
  */
 static
 int i2400m_fw_dnload(struct i2400m *i2400m, const struct i2400m_bcf_hdr *bcf,
-		     size_t bcf_size, enum i2400m_bri flags)
+		     size_t fw_size, enum i2400m_bri flags)
 {
 	int ret = 0;
 	struct device *dev = i2400m_dev(i2400m);
 	int count = i2400m->bus_bm_retries;
+	const struct i2400m_bcf_hdr *bcf_hdr;
+	size_t bcf_size;
 
-	d_fnstart(5, dev, "(i2400m %p bcf %p size %zu)\n",
-		  i2400m, bcf, bcf_size);
+	d_fnstart(5, dev, "(i2400m %p bcf %p fw size %zu)\n",
+		  i2400m, bcf, fw_size);
 	i2400m->boot_mode = 1;
 	wmb();		/* Make sure other readers see it */
 hw_reboot:
@@ -985,13 +1419,28 @@
 	 * Initialize the download, push the bytes to the device and
 	 * then jump to the new firmware. Note @ret is passed with the
 	 * offset of the jump instruction to _dnload_finalize()
+	 *
+	 * Note we need to use the BCF header in the firmware image
+	 * that matches the barker that the device sent when it
+	 * rebooted, so it has to be passed along.
 	 */
-	ret = i2400m_dnload_init(i2400m, bcf);	/* Init device's dnload */
+	ret = -EBADF;
+	bcf_hdr = i2400m_bcf_hdr_find(i2400m);
+	if (bcf_hdr == NULL)
+		goto error_bcf_hdr_find;
+
+	ret = i2400m_dnload_init(i2400m, bcf_hdr);
 	if (ret == -ERESTARTSYS)
 		goto error_dev_rebooted;
 	if (ret < 0)
 		goto error_dnload_init;
 
+	/*
+	 * bcf_size refers to one header size plus the fw sections size
+	 * indicated by the header,ie. if there are other extended headers
+	 * at the tail, they are not counted
+	 */
+	bcf_size = sizeof(u32) * le32_to_cpu(bcf_hdr->size);
 	ret = i2400m_dnload_bcf(i2400m, bcf, bcf_size);
 	if (ret == -ERESTARTSYS)
 		goto error_dev_rebooted;
@@ -1001,7 +1450,7 @@
 		goto error_dnload_bcf;
 	}
 
-	ret = i2400m_dnload_finalize(i2400m, bcf, ret);
+	ret = i2400m_dnload_finalize(i2400m, bcf_hdr, bcf, ret);
 	if (ret == -ERESTARTSYS)
 		goto error_dev_rebooted;
 	if (ret < 0) {
@@ -1018,10 +1467,11 @@
 error_dnload_finalize:
 error_dnload_bcf:
 error_dnload_init:
+error_bcf_hdr_find:
 error_bootrom_init:
 error_too_many_reboots:
 	d_fnend(5, dev, "(i2400m %p bcf %p size %zu) = %d\n",
-		i2400m, bcf, bcf_size, ret);
+		i2400m, bcf, fw_size, ret);
 	return ret;
 
 error_dev_rebooted:
@@ -1031,6 +1481,61 @@
 	goto hw_reboot;
 }
 
+static
+int i2400m_fw_bootstrap(struct i2400m *i2400m, const struct firmware *fw,
+			enum i2400m_bri flags)
+{
+	int ret;
+	struct device *dev = i2400m_dev(i2400m);
+	const struct i2400m_bcf_hdr *bcf;	/* Firmware data */
+
+	d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
+	bcf = (void *) fw->data;
+	ret = i2400m_fw_check(i2400m, bcf, fw->size);
+	if (ret >= 0)
+		ret = i2400m_fw_dnload(i2400m, bcf, fw->size, flags);
+	if (ret < 0)
+		dev_err(dev, "%s: cannot use: %d, skipping\n",
+			i2400m->fw_name, ret);
+	kfree(i2400m->fw_hdrs);
+	i2400m->fw_hdrs = NULL;
+	d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret);
+	return ret;
+}
+
+
+/* Refcounted container for firmware data */
+struct i2400m_fw {
+	struct kref kref;
+	const struct firmware *fw;
+};
+
+
+static
+void i2400m_fw_destroy(struct kref *kref)
+{
+	struct i2400m_fw *i2400m_fw =
+		container_of(kref, struct i2400m_fw, kref);
+	release_firmware(i2400m_fw->fw);
+	kfree(i2400m_fw);
+}
+
+
+static
+struct i2400m_fw *i2400m_fw_get(struct i2400m_fw *i2400m_fw)
+{
+	if (i2400m_fw != NULL && i2400m_fw != (void *) ~0)
+		kref_get(&i2400m_fw->kref);
+	return i2400m_fw;
+}
+
+
+static
+void i2400m_fw_put(struct i2400m_fw *i2400m_fw)
+{
+	kref_put(&i2400m_fw->kref, i2400m_fw_destroy);
+}
+
 
 /**
  * i2400m_dev_bootstrap - Bring the device to a known state and upload firmware
@@ -1049,42 +1554,109 @@
  */
 int i2400m_dev_bootstrap(struct i2400m *i2400m, enum i2400m_bri flags)
 {
-	int ret = 0, itr = 0;
+	int ret, itr;
 	struct device *dev = i2400m_dev(i2400m);
-	const struct firmware *fw;
+	struct i2400m_fw *i2400m_fw;
 	const struct i2400m_bcf_hdr *bcf;	/* Firmware data */
+	const struct firmware *fw;
 	const char *fw_name;
 
 	d_fnstart(5, dev, "(i2400m %p)\n", i2400m);
 
+	ret = -ENODEV;
+	spin_lock(&i2400m->rx_lock);
+	i2400m_fw = i2400m_fw_get(i2400m->fw_cached);
+	spin_unlock(&i2400m->rx_lock);
+	if (i2400m_fw == (void *) ~0) {
+		dev_err(dev, "can't load firmware now!");
+		goto out;
+	} else if (i2400m_fw != NULL) {
+		dev_info(dev, "firmware %s: loading from cache\n",
+			 i2400m->fw_name);
+		ret = i2400m_fw_bootstrap(i2400m, i2400m_fw->fw, flags);
+		i2400m_fw_put(i2400m_fw);
+		goto out;
+	}
+
 	/* Load firmware files to memory. */
-	itr = 0;
-	while(1) {
+	for (itr = 0, bcf = NULL, ret = -ENOENT; ; itr++) {
 		fw_name = i2400m->bus_fw_names[itr];
 		if (fw_name == NULL) {
 			dev_err(dev, "Could not find a usable firmware image\n");
-			ret = -ENOENT;
-			goto error_no_fw;
+			break;
 		}
+		d_printf(1, dev, "trying firmware %s (%d)\n", fw_name, itr);
 		ret = request_firmware(&fw, fw_name, dev);
-		if (ret == 0)
-			break;		/* got it */
-		if (ret < 0)
+		if (ret < 0) {
 			dev_err(dev, "fw %s: cannot load file: %d\n",
 				fw_name, ret);
-		itr++;
+			continue;
+		}
+		i2400m->fw_name = fw_name;
+		ret = i2400m_fw_bootstrap(i2400m, fw, flags);
+		release_firmware(fw);
+		if (ret >= 0)	/* firmware loaded succesfully */
+			break;
+		i2400m->fw_name = NULL;
 	}
-
-	bcf = (void *) fw->data;
-	i2400m->fw_name = fw_name;
-	ret = i2400m_fw_check(i2400m, bcf, fw->size);
-	if (ret < 0)
-		goto error_fw_bad;
-	ret = i2400m_fw_dnload(i2400m, bcf, fw->size, flags);
-error_fw_bad:
-	release_firmware(fw);
-error_no_fw:
+out:
 	d_fnend(5, dev, "(i2400m %p) = %d\n", i2400m, ret);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(i2400m_dev_bootstrap);
+
+
+void i2400m_fw_cache(struct i2400m *i2400m)
+{
+	int result;
+	struct i2400m_fw *i2400m_fw;
+	struct device *dev = i2400m_dev(i2400m);
+
+	/* if there is anything there, free it -- now, this'd be weird */
+	spin_lock(&i2400m->rx_lock);
+	i2400m_fw = i2400m->fw_cached;
+	spin_unlock(&i2400m->rx_lock);
+	if (i2400m_fw != NULL && i2400m_fw != (void *) ~0) {
+		i2400m_fw_put(i2400m_fw);
+		WARN(1, "%s:%u: still cached fw still present?\n",
+		     __func__, __LINE__);
+	}
+
+	if (i2400m->fw_name == NULL) {
+		dev_err(dev, "firmware n/a: can't cache\n");
+		i2400m_fw = (void *) ~0;
+		goto out;
+	}
+
+	i2400m_fw = kzalloc(sizeof(*i2400m_fw), GFP_ATOMIC);
+	if (i2400m_fw == NULL)
+		goto out;
+	kref_init(&i2400m_fw->kref);
+	result = request_firmware(&i2400m_fw->fw, i2400m->fw_name, dev);
+	if (result < 0) {
+		dev_err(dev, "firmware %s: failed to cache: %d\n",
+			i2400m->fw_name, result);
+		kfree(i2400m_fw);
+		i2400m_fw = (void *) ~0;
+	} else
+		dev_info(dev, "firmware %s: cached\n", i2400m->fw_name);
+out:
+	spin_lock(&i2400m->rx_lock);
+	i2400m->fw_cached = i2400m_fw;
+	spin_unlock(&i2400m->rx_lock);
+}
+
+
+void i2400m_fw_uncache(struct i2400m *i2400m)
+{
+	struct i2400m_fw *i2400m_fw;
+
+	spin_lock(&i2400m->rx_lock);
+	i2400m_fw = i2400m->fw_cached;
+	i2400m->fw_cached = NULL;
+	spin_unlock(&i2400m->rx_lock);
+
+	if (i2400m_fw != NULL && i2400m_fw != (void *) ~0)
+		i2400m_fw_put(i2400m_fw);
+}
+
diff --git a/drivers/net/wimax/i2400m/i2400m-sdio.h b/drivers/net/wimax/i2400m/i2400m-sdio.h
index 9c4e318..b9c4bed 100644
--- a/drivers/net/wimax/i2400m/i2400m-sdio.h
+++ b/drivers/net/wimax/i2400m/i2400m-sdio.h
@@ -67,6 +67,7 @@
 
 /* Host-Device interface for SDIO */
 enum {
+	I2400M_SDIO_BOOT_RETRIES = 3,
 	I2400MS_BLK_SIZE = 256,
 	I2400MS_PL_SIZE_MAX = 0x3E00,
 
@@ -77,9 +78,11 @@
 	I2400MS_INTR_GET_SIZE_ADDR = 0x2C,
 	/* The number of ticks to wait for the device to signal that
 	 * it is ready */
-	I2400MS_INIT_SLEEP_INTERVAL = 10,
+	I2400MS_INIT_SLEEP_INTERVAL = 100,
 	/* How long to wait for the device to settle after reset */
 	I2400MS_SETTLE_TIME = 40,
+	/* The number of msec to wait for IOR after sending IOE */
+	IWMC3200_IOR_TIMEOUT = 10,
 };
 
 
@@ -97,6 +100,14 @@
  * @tx_workqueue: workqeueue used for data TX; we don't use the
  *     system's workqueue as that might cause deadlocks with code in
  *     the bus-generic driver.
+ *
+ * @debugfs_dentry: dentry for the SDIO specific debugfs files
+ *
+ *     Note this value is set to NULL upon destruction; this is
+ *     because some routinges use it to determine if we are inside the
+ *     probe() path or some other path. When debugfs is disabled,
+ *     creation sets the dentry to '(void*) -ENODEV', which is valid
+ *     for the test.
  */
 struct i2400ms {
 	struct i2400m i2400m;		/* FIRST! See doc */
@@ -111,6 +122,9 @@
 	wait_queue_head_t bm_wfa_wq;
 	int bm_wait_result;
 	size_t bm_ack_size;
+
+	/* Device is any of the iwmc3200 SKUs */
+	unsigned iwmc3200:1;
 };
 
 
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index 6f76558..5cc0f27 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -88,6 +88,13 @@
 	u16 errorcount;
 };
 
+struct i2400m_endpoint_cfg {
+	unsigned char bulk_out;
+	unsigned char notification;
+	unsigned char reset_cold;
+	unsigned char bulk_in;
+};
+
 static inline void edc_init(struct edc *edc)
 {
 	edc->timestart = jiffies;
@@ -137,15 +144,13 @@
 
 /* Host-Device interface for USB */
 enum {
+	I2400M_USB_BOOT_RETRIES = 3,
 	I2400MU_MAX_NOTIFICATION_LEN = 256,
 	I2400MU_BLK_SIZE = 16,
 	I2400MU_PL_SIZE_MAX = 0x3EFF,
 
-	/* Endpoints */
-	I2400MU_EP_BULK_OUT = 0,
-	I2400MU_EP_NOTIFICATION,
-	I2400MU_EP_RESET_COLD,
-	I2400MU_EP_BULK_IN,
+	/* Device IDs */
+	USB_DEVICE_ID_I6050 = 0x0186,
 };
 
 
@@ -215,6 +220,7 @@
 	struct usb_device *usb_dev;
 	struct usb_interface *usb_iface;
 	struct edc urb_edc;		/* Error density counter */
+	struct i2400m_endpoint_cfg endpoint_cfg;
 
 	struct urb *notif_urb;
 	struct task_struct *tx_kthread;
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 60330f3..04df9bb 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -117,17 +117,31 @@
  * well as i2400m->wimax_dev.net_dev and call i2400m_setup(). The
  * i2400m driver will only register with the WiMAX and network stacks;
  * the only access done to the device is to read the MAC address so we
- * can register a network device. This calls i2400m_dev_start() to
- * load firmware, setup communication with the device and configure it
- * for operation.
+ * can register a network device.
+ *
+ * The high-level call flow is:
+ *
+ * bus_probe()
+ *   i2400m_setup()
+ *     i2400m->bus_setup()
+ *     boot rom initialization / read mac addr
+ *     network / WiMAX stacks registration
+ *     i2400m_dev_start()
+ *       i2400m->bus_dev_start()
+ *       i2400m_dev_initialize()
+ *
+ * The reverse applies for a disconnect() call:
+ *
+ * bus_disconnect()
+ *   i2400m_release()
+ *     i2400m_dev_stop()
+ *       i2400m_dev_shutdown()
+ *       i2400m->bus_dev_stop()
+ *     network / WiMAX stack unregistration
+ *     i2400m->bus_release()
  *
  * At this point, control and data communications are possible.
  *
- * On disconnect/driver unload, the bus-specific disconnect function
- * calls i2400m_release() to undo i2400m_setup(). i2400m_dev_stop()
- * shuts the firmware down and releases resources uses to communicate
- * with the device.
- *
  * While the device is up, it might reset. The bus-specific driver has
  * to catch that situation and call i2400m_dev_reset_handle() to deal
  * with it (reset the internal driver structures and go back to square
@@ -148,9 +162,6 @@
 
 /* Misc constants */
 enum {
-	/* Firmware uploading */
-	I2400M_BOOT_RETRIES = 3,
-	I3200_BOOT_RETRIES = 3,
 	/* Size of the Boot Mode Command buffer */
 	I2400M_BM_CMD_BUF_SIZE = 16 * 1024,
 	I2400M_BM_ACK_BUF_SIZE = 256,
@@ -197,6 +208,7 @@
 
 struct i2400m_reset_ctx;
 struct i2400m_roq;
+struct i2400m_barker_db;
 
 /**
  * struct i2400m - descriptor for an Intel 2400m
@@ -204,27 +216,50 @@
  * Members marked with [fill] must be filled out/initialized before
  * calling i2400m_setup().
  *
+ * Note the @bus_setup/@bus_release, @bus_dev_start/@bus_dev_release
+ * call pairs are very much doing almost the same, and depending on
+ * the underlying bus, some stuff has to be put in one or the
+ * other. The idea of setup/release is that they setup the minimal
+ * amount needed for loading firmware, where us dev_start/stop setup
+ * the rest needed to do full data/control traffic.
+ *
  * @bus_tx_block_size: [fill] SDIO imposes a 256 block size, USB 16,
  *     so we have a tx_blk_size variable that the bus layer sets to
  *     tell the engine how much of that we need.
  *
  * @bus_pl_size_max: [fill] Maximum payload size.
  *
- * @bus_dev_start: [fill] Function called by the bus-generic code
- *     [i2400m_dev_start()] to setup the bus-specific communications
- *     to the the device. See LIFE CYCLE above.
+ * @bus_setup: [optional fill] Function called by the bus-generic code
+ *     [i2400m_setup()] to setup the basic bus-specific communications
+ *     to the the device needed to load firmware. See LIFE CYCLE above.
  *
  *     NOTE: Doesn't need to upload the firmware, as that is taken
  *     care of by the bus-generic code.
  *
- * @bus_dev_stop: [fill] Function called by the bus-generic code
- *     [i2400m_dev_stop()] to shutdown the bus-specific communications
- *     to the the device. See LIFE CYCLE above.
+ * @bus_release: [optional fill] Function called by the bus-generic
+ *     code [i2400m_release()] to shutdown the basic bus-specific
+ *     communications to the the device needed to load firmware. See
+ *     LIFE CYCLE above.
  *
  *     This function does not need to reset the device, just tear down
  *     all the host resources created to  handle communication with
  *     the device.
  *
+ * @bus_dev_start: [optional fill] Function called by the bus-generic
+ *     code [i2400m_dev_start()] to do things needed to start the
+ *     device. See LIFE CYCLE above.
+ *
+ *     NOTE: Doesn't need to upload the firmware, as that is taken
+ *     care of by the bus-generic code.
+ *
+ * @bus_dev_stop: [optional fill] Function called by the bus-generic
+ *     code [i2400m_dev_stop()] to do things needed for stopping the
+ *     device. See LIFE CYCLE above.
+ *
+ *     This function does not need to reset the device, just tear down
+ *     all the host resources created to handle communication with
+ *     the device.
+ *
  * @bus_tx_kick: [fill] Function called by the bus-generic code to let
  *     the bus-specific code know that there is data available in the
  *     TX FIFO for transmission to the device.
@@ -246,6 +281,9 @@
  *     process, so it cannot rely on common infrastructure being laid
  *     out.
  *
+ *     IMPORTANT: don't call reset on RT_BUS with i2400m->init_mutex
+ *     held, as the .pre/.post reset handlers will deadlock.
+ *
  * @bus_bm_retries: [fill] How many times shall a firmware upload /
  *     device initialization be retried? Different models of the same
  *     device might need different values, hence it is set by the
@@ -297,6 +335,27 @@
  *     force this to be the first field so that we can get from
  *     netdev_priv() the right pointer.
  *
+ * @updown: the device is up and ready for transmitting control and
+ *     data packets. This implies @ready (communication infrastructure
+ *     with the device is ready) and the device's firmware has been
+ *     loaded and the device initialized.
+ *
+ *     Write to it only inside a i2400m->init_mutex protected area
+ *     followed with a wmb(); rmb() before accesing (unless locked
+ *     inside i2400m->init_mutex). Read access can be loose like that
+ *     [just using rmb()] because the paths that use this also do
+ *     other error checks later on.
+ *
+ * @ready: Communication infrastructure with the device is ready, data
+ *     frames can start to be passed around (this is lighter than
+ *     using the WiMAX state for certain hot paths).
+ *
+ *     Write to it only inside a i2400m->init_mutex protected area
+ *     followed with a wmb(); rmb() before accesing (unless locked
+ *     inside i2400m->init_mutex). Read access can be loose like that
+ *     [just using rmb()] because the paths that use this also do
+ *     other error checks later on.
+ *
  * @rx_reorder: 1 if RX reordering is enabled; this can only be
  *     set at probe time.
  *
@@ -362,6 +421,13 @@
  *     delivered. Then the driver can release them to the host. See
  *     drivers/net/i2400m/rx.c for details.
  *
+ * @rx_reports: reports received from the device that couldn't be
+ *     processed because the driver wasn't still ready; when ready,
+ *     they are pulled from here and chewed.
+ *
+ * @rx_reports_ws: Work struct used to kick a scan of the RX reports
+ *     list and to process each.
+ *
  * @src_mac_addr: MAC address used to make ethernet packets be coming
  *     from. This is generated at i2400m_setup() time and used during
  *     the life cycle of the instance. See i2400m_fake_eth_header().
@@ -422,6 +488,25 @@
  *
  * @fw_version: version of the firmware interface, Major.minor,
  *     encoded in the high word and low word (major << 16 | minor).
+ *
+ * @fw_hdrs: NULL terminated array of pointers to the firmware
+ *     headers. This is only available during firmware load time.
+ *
+ * @fw_cached: Used to cache firmware when the system goes to
+ *     suspend/standby/hibernation (as on resume we can't read it). If
+ *     NULL, no firmware was cached, read it. If ~0, you can't read
+ *     any firmware files (the system still didn't come out of suspend
+ *     and failed to cache one), so abort; otherwise, a valid cached
+ *     firmware to be used. Access to this variable is protected by
+ *     the spinlock i2400m->rx_lock.
+ *
+ * @barker: barker type that the device uses; this is initialized by
+ *     i2400m_is_boot_barker() the first time it is called. Then it
+ *     won't change during the life cycle of the device and everytime
+ *     a boot barker is received, it is just verified for it being the
+ *     same.
+ *
+ * @pm_notifier: used to register for PM events
  */
 struct i2400m {
 	struct wimax_dev wimax_dev;	/* FIRST! See doc */
@@ -429,7 +514,7 @@
 	unsigned updown:1;		/* Network device is up or down */
 	unsigned boot_mode:1;		/* is the device in boot mode? */
 	unsigned sboot:1;		/* signed or unsigned fw boot */
-	unsigned ready:1;		/* all probing steps done */
+	unsigned ready:1;		/* Device comm infrastructure ready */
 	unsigned rx_reorder:1;		/* RX reorder is enabled */
 	u8 trace_msg_from_user;		/* echo rx msgs to 'trace' pipe */
 					/* typed u8 so /sys/kernel/debug/u8 can tweak */
@@ -440,8 +525,10 @@
 	size_t bus_pl_size_max;
 	unsigned bus_bm_retries;
 
+	int (*bus_setup)(struct i2400m *);
 	int (*bus_dev_start)(struct i2400m *);
 	void (*bus_dev_stop)(struct i2400m *);
+	void (*bus_release)(struct i2400m *);
 	void (*bus_tx_kick)(struct i2400m *);
 	int (*bus_reset)(struct i2400m *, enum i2400m_reset_type);
 	ssize_t (*bus_bm_cmd_send)(struct i2400m *,
@@ -468,6 +555,8 @@
 		rx_num, rx_size_acc, rx_size_min, rx_size_max;
 	struct i2400m_roq *rx_roq;	/* not under rx_lock! */
 	u8 src_mac_addr[ETH_HLEN];
+	struct list_head rx_reports;	/* under rx_lock! */
+	struct work_struct rx_report_ws;
 
 	struct mutex msg_mutex;		/* serialize command execution */
 	struct completion msg_completion;
@@ -487,40 +576,15 @@
 	struct dentry *debugfs_dentry;
 	const char *fw_name;		/* name of the current firmware image */
 	unsigned long fw_version;	/* version of the firmware interface */
+	const struct i2400m_bcf_hdr **fw_hdrs;
+	struct i2400m_fw *fw_cached;	/* protected by rx_lock */
+	struct i2400m_barker_db *barker;
+
+	struct notifier_block pm_notifier;
 };
 
 
 /*
- * Initialize a 'struct i2400m' from all zeroes
- *
- * This is a bus-generic API call.
- */
-static inline
-void i2400m_init(struct i2400m *i2400m)
-{
-	wimax_dev_init(&i2400m->wimax_dev);
-
-	i2400m->boot_mode = 1;
-	i2400m->rx_reorder = 1;
-	init_waitqueue_head(&i2400m->state_wq);
-
-	spin_lock_init(&i2400m->tx_lock);
-	i2400m->tx_pl_min = UINT_MAX;
-	i2400m->tx_size_min = UINT_MAX;
-
-	spin_lock_init(&i2400m->rx_lock);
-	i2400m->rx_pl_min = UINT_MAX;
-	i2400m->rx_size_min = UINT_MAX;
-
-	mutex_init(&i2400m->msg_mutex);
-	init_completion(&i2400m->msg_completion);
-
-	mutex_init(&i2400m->init_mutex);
-	/* wake_tx_ws is initialized in i2400m_tx_setup() */
-}
-
-
-/*
  * Bus-generic internal APIs
  * -------------------------
  */
@@ -577,6 +641,14 @@
 extern int i2400m_dev_bootstrap(struct i2400m *, enum i2400m_bri);
 extern int i2400m_read_mac_addr(struct i2400m *);
 extern int i2400m_bootrom_init(struct i2400m *, enum i2400m_bri);
+extern int i2400m_is_boot_barker(struct i2400m *, const void *, size_t);
+static inline
+int i2400m_is_d2h_barker(const void *buf)
+{
+	const __le32 *barker = buf;
+	return le32_to_cpu(*barker) == I2400M_D2H_MSG_BARKER;
+}
+extern void i2400m_unknown_barker(struct i2400m *, const void *, size_t);
 
 /* Make/grok boot-rom header commands */
 
@@ -644,6 +716,8 @@
 /*
  * Driver / device setup and internal functions
  */
+extern void i2400m_init(struct i2400m *);
+extern int i2400m_reset(struct i2400m *, enum i2400m_reset_type);
 extern void i2400m_netdev_setup(struct net_device *net_dev);
 extern int i2400m_sysfs_setup(struct device_driver *);
 extern void i2400m_sysfs_release(struct device_driver *);
@@ -654,10 +728,14 @@
 extern int i2400m_rx_setup(struct i2400m *);
 extern void i2400m_rx_release(struct i2400m *);
 
+extern void i2400m_fw_cache(struct i2400m *);
+extern void i2400m_fw_uncache(struct i2400m *);
+
 extern void i2400m_net_rx(struct i2400m *, struct sk_buff *, unsigned,
 			  const void *, int);
 extern void i2400m_net_erx(struct i2400m *, struct sk_buff *,
 			   enum i2400m_cs);
+extern void i2400m_net_wake_stop(struct i2400m *);
 enum i2400m_pt;
 extern int i2400m_tx(struct i2400m *, const void *, size_t, enum i2400m_pt);
 
@@ -672,14 +750,12 @@
 static inline void i2400m_debugfs_rm(struct i2400m *i2400m) {}
 #endif
 
-/* Called by _dev_start()/_dev_stop() to initialize the device itself */
+/* Initialize/shutdown the device */
 extern int i2400m_dev_initialize(struct i2400m *);
 extern void i2400m_dev_shutdown(struct i2400m *);
 
 extern struct attribute_group i2400m_dev_attr_group;
 
-extern int i2400m_schedule_work(struct i2400m *,
-				void (*)(struct work_struct *), gfp_t);
 
 /* HDI message's payload description handling */
 
@@ -724,7 +800,9 @@
 	dev_put(i2400m->wimax_dev.net_dev);
 }
 
-extern int i2400m_dev_reset_handle(struct i2400m *);
+extern int i2400m_dev_reset_handle(struct i2400m *, const char *);
+extern int i2400m_pre_reset(struct i2400m *);
+extern int i2400m_post_reset(struct i2400m *);
 
 /*
  * _setup()/_release() are called by the probe/disconnect functions of
@@ -737,20 +815,6 @@
 extern struct i2400m_msg_hdr *i2400m_tx_msg_get(struct i2400m *, size_t *);
 extern void i2400m_tx_msg_sent(struct i2400m *);
 
-static const __le32 i2400m_NBOOT_BARKER[4] = {
-	cpu_to_le32(I2400M_NBOOT_BARKER),
-	cpu_to_le32(I2400M_NBOOT_BARKER),
-	cpu_to_le32(I2400M_NBOOT_BARKER),
-	cpu_to_le32(I2400M_NBOOT_BARKER)
-};
-
-static const __le32 i2400m_SBOOT_BARKER[4] = {
-	cpu_to_le32(I2400M_SBOOT_BARKER),
-	cpu_to_le32(I2400M_SBOOT_BARKER),
-	cpu_to_le32(I2400M_SBOOT_BARKER),
-	cpu_to_le32(I2400M_SBOOT_BARKER)
-};
-
 extern int i2400m_power_save_disabled;
 
 /*
@@ -773,10 +837,12 @@
 struct i2400m_work {
 	struct work_struct ws;
 	struct i2400m *i2400m;
+	size_t pl_size;
 	u8 pl[0];
 };
-extern int i2400m_queue_work(struct i2400m *,
-			     void (*)(struct work_struct *), gfp_t,
+
+extern int i2400m_schedule_work(struct i2400m *,
+				void (*)(struct work_struct *), gfp_t,
 				const void *, size_t);
 
 extern int i2400m_msg_check_status(const struct i2400m_l3l4_hdr *,
@@ -789,6 +855,7 @@
 				const struct i2400m_l3l4_hdr *, size_t);
 extern void i2400m_report_hook(struct i2400m *,
 			       const struct i2400m_l3l4_hdr *, size_t);
+extern void i2400m_report_hook_work(struct work_struct *);
 extern int i2400m_cmd_enter_powersave(struct i2400m *);
 extern int i2400m_cmd_get_state(struct i2400m *);
 extern int i2400m_cmd_exit_idle(struct i2400m *);
@@ -849,6 +916,12 @@
 #endif
 }
 
+
+/* module initialization helpers */
+extern int i2400m_barker_db_init(const char *);
+extern void i2400m_barker_db_exit(void);
+
+
 /* Module parameters */
 
 extern int i2400m_idle_mode_disabled;
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 796396c..599aa4e 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -74,6 +74,7 @@
  */
 #include <linux/if_arp.h>
 #include <linux/netdevice.h>
+#include <linux/ethtool.h>
 #include "i2400m.h"
 
 
@@ -88,7 +89,10 @@
 	 * The MTU is 1400 or less
 	 */
 	I2400M_MAX_MTU = 1400,
-	I2400M_TX_TIMEOUT = HZ,
+	/* 20 secs? yep, this is the maximum timeout that the device
+	 * might take to get out of IDLE / negotiate it with the base
+	 * station. We add 1sec for good measure. */
+	I2400M_TX_TIMEOUT = 21 * HZ,
 	I2400M_TX_QLEN = 5,
 };
 
@@ -101,22 +105,19 @@
 	struct device *dev = i2400m_dev(i2400m);
 
 	d_fnstart(3, dev, "(net_dev %p [i2400m %p])\n", net_dev, i2400m);
-	if (i2400m->ready == 0) {
-		dev_err(dev, "Device is still initializing\n");
-		result = -EBUSY;
-	} else
+	/* Make sure we wait until init is complete... */
+	mutex_lock(&i2400m->init_mutex);
+	if (i2400m->updown)
 		result = 0;
+	else
+		result = -EBUSY;
+	mutex_unlock(&i2400m->init_mutex);
 	d_fnend(3, dev, "(net_dev %p [i2400m %p]) = %d\n",
 		net_dev, i2400m, result);
 	return result;
 }
 
 
-/*
- *
- * On kernel versions where cancel_work_sync() didn't return anything,
- * we rely on wake_tx_skb() being non-NULL.
- */
 static
 int i2400m_stop(struct net_device *net_dev)
 {
@@ -124,21 +125,7 @@
 	struct device *dev = i2400m_dev(i2400m);
 
 	d_fnstart(3, dev, "(net_dev %p [i2400m %p])\n", net_dev, i2400m);
-	/* See i2400m_hard_start_xmit(), references are taken there
-	 * and here we release them if the work was still
-	 * pending. Note we can't differentiate work not pending vs
-	 * never scheduled, so the NULL check does that. */
-	if (cancel_work_sync(&i2400m->wake_tx_ws) == 0
-	    && i2400m->wake_tx_skb != NULL) {
-		unsigned long flags;
-		struct sk_buff *wake_tx_skb;
-		spin_lock_irqsave(&i2400m->tx_lock, flags);
-		wake_tx_skb = i2400m->wake_tx_skb;	/* compat help */
-		i2400m->wake_tx_skb = NULL;	/* compat help */
-		spin_unlock_irqrestore(&i2400m->tx_lock, flags);
-		i2400m_put(i2400m);
-		kfree_skb(wake_tx_skb);
-	}
+	i2400m_net_wake_stop(i2400m);
 	d_fnend(3, dev, "(net_dev %p [i2400m %p]) = 0\n", net_dev, i2400m);
 	return 0;
 }
@@ -167,6 +154,7 @@
 {
 	int result;
 	struct i2400m *i2400m = container_of(ws, struct i2400m, wake_tx_ws);
+	struct net_device *net_dev = i2400m->wimax_dev.net_dev;
 	struct device *dev = i2400m_dev(i2400m);
 	struct sk_buff *skb = i2400m->wake_tx_skb;
 	unsigned long flags;
@@ -182,27 +170,36 @@
 		dev_err(dev, "WAKE&TX: skb dissapeared!\n");
 		goto out_put;
 	}
+	/* If we have, somehow, lost the connection after this was
+	 * queued, don't do anything; this might be the device got
+	 * reset or just disconnected. */
+	if (unlikely(!netif_carrier_ok(net_dev)))
+		goto out_kfree;
 	result = i2400m_cmd_exit_idle(i2400m);
 	if (result == -EILSEQ)
 		result = 0;
 	if (result < 0) {
 		dev_err(dev, "WAKE&TX: device didn't get out of idle: "
-			"%d\n", result);
-			goto error;
+			"%d - resetting\n", result);
+		i2400m_reset(i2400m, I2400M_RT_BUS);
+		goto error;
 	}
 	result = wait_event_timeout(i2400m->state_wq,
-				    i2400m->state != I2400M_SS_IDLE, 5 * HZ);
+				    i2400m->state != I2400M_SS_IDLE,
+				    net_dev->watchdog_timeo - HZ/2);
 	if (result == 0)
 		result = -ETIMEDOUT;
 	if (result < 0) {
 		dev_err(dev, "WAKE&TX: error waiting for device to exit IDLE: "
-			"%d\n", result);
+			"%d - resetting\n", result);
+		i2400m_reset(i2400m, I2400M_RT_BUS);
 		goto error;
 	}
 	msleep(20);	/* device still needs some time or it drops it */
 	result = i2400m_tx(i2400m, skb->data, skb->len, I2400M_PT_DATA);
-	netif_wake_queue(i2400m->wimax_dev.net_dev);
 error:
+	netif_wake_queue(net_dev);
+out_kfree:
 	kfree_skb(skb);	/* refcount transferred by _hard_start_xmit() */
 out_put:
 	i2400m_put(i2400m);
@@ -229,6 +226,38 @@
 }
 
 
+
+/*
+ * Cleanup resources acquired during i2400m_net_wake_tx()
+ *
+ * This is called by __i2400m_dev_stop and means we have to make sure
+ * the workqueue is flushed from any pending work.
+ */
+void i2400m_net_wake_stop(struct i2400m *i2400m)
+{
+	struct device *dev = i2400m_dev(i2400m);
+
+	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
+	/* See i2400m_hard_start_xmit(), references are taken there
+	 * and here we release them if the work was still
+	 * pending. Note we can't differentiate work not pending vs
+	 * never scheduled, so the NULL check does that. */
+	if (cancel_work_sync(&i2400m->wake_tx_ws) == 0
+	    && i2400m->wake_tx_skb != NULL) {
+		unsigned long flags;
+		struct sk_buff *wake_tx_skb;
+		spin_lock_irqsave(&i2400m->tx_lock, flags);
+		wake_tx_skb = i2400m->wake_tx_skb;	/* compat help */
+		i2400m->wake_tx_skb = NULL;	/* compat help */
+		spin_unlock_irqrestore(&i2400m->tx_lock, flags);
+		i2400m_put(i2400m);
+		kfree_skb(wake_tx_skb);
+	}
+	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
+	return;
+}
+
+
 /*
  * TX an skb to an idle device
  *
@@ -342,6 +371,20 @@
 	int result;
 
 	d_fnstart(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
+	if (skb_header_cloned(skb)) {
+		/*
+		 * Make tcpdump/wireshark happy -- if they are
+		 * running, the skb is cloned and we will overwrite
+		 * the mac fields in i2400m_tx_prep_header. Expand
+		 * seems to fix this...
+		 */
+		result = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+		if (result) {
+			result = NETDEV_TX_BUSY;
+			goto error_expand;
+		}
+	}
+
 	if (i2400m->state == I2400M_SS_IDLE)
 		result = i2400m_net_wake_tx(i2400m, net_dev, skb);
 	else
@@ -352,10 +395,11 @@
 		net_dev->stats.tx_packets++;
 		net_dev->stats.tx_bytes += skb->len;
 	}
+	result = NETDEV_TX_OK;
+error_expand:
 	kfree_skb(skb);
-
-	d_fnend(3, dev, "(skb %p net_dev %p)\n", skb, net_dev);
-	return NETDEV_TX_OK;
+	d_fnend(3, dev, "(skb %p net_dev %p) = %d\n", skb, net_dev, result);
+	return result;
 }
 
 
@@ -559,6 +603,22 @@
 	.ndo_change_mtu = i2400m_change_mtu,
 };
 
+static void i2400m_get_drvinfo(struct net_device *net_dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct i2400m *i2400m = net_dev_to_i2400m(net_dev);
+
+	strncpy(info->driver, KBUILD_MODNAME, sizeof(info->driver) - 1);
+	strncpy(info->fw_version, i2400m->fw_name, sizeof(info->fw_version) - 1);
+	if (net_dev->dev.parent)
+		strncpy(info->bus_info, dev_name(net_dev->dev.parent),
+			sizeof(info->bus_info) - 1);
+}
+
+static const struct ethtool_ops i2400m_ethtool_ops = {
+	.get_drvinfo = i2400m_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+};
 
 /**
  * i2400m_netdev_setup - Setup setup @net_dev's i2400m private data
@@ -580,6 +640,7 @@
 		   & ~IFF_MULTICAST);
 	net_dev->watchdog_timeo = I2400M_TX_TIMEOUT;
 	net_dev->netdev_ops = &i2400m_netdev_ops;
+	net_dev->ethtool_ops = &i2400m_ethtool_ops;
 	d_fnend(3, NULL, "(net_dev %p) = void\n", net_dev);
 }
 EXPORT_SYMBOL_GPL(i2400m_netdev_setup);
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 07c32e6..e3d2a9d 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -158,30 +158,104 @@
 	struct sk_buff *skb_rx;
 	const struct i2400m_l3l4_hdr *l3l4_hdr;
 	size_t size;
+	struct list_head list_node;
 };
 
 
 /*
  * Execute i2400m_report_hook in a workqueue
  *
- * Unpacks arguments from the deferred call, executes it and then
- * drops the references.
+ * Goes over the list of queued reports in i2400m->rx_reports and
+ * processes them.
  *
- * Obvious NOTE: References are needed because we are a separate
- *     thread; otherwise the buffer changes under us because it is
- *     released by the original caller.
+ * NOTE: refcounts on i2400m are not needed because we flush the
+ *     workqueue this runs on (i2400m->work_queue) before destroying
+ *     i2400m.
  */
-static
 void i2400m_report_hook_work(struct work_struct *ws)
 {
-	struct i2400m_work *iw =
-		container_of(ws, struct i2400m_work, ws);
-	struct i2400m_report_hook_args *args = (void *) iw->pl;
-	if (iw->i2400m->ready)
-		i2400m_report_hook(iw->i2400m, args->l3l4_hdr, args->size);
-	kfree_skb(args->skb_rx);
-	i2400m_put(iw->i2400m);
-	kfree(iw);
+	struct i2400m *i2400m = container_of(ws, struct i2400m, rx_report_ws);
+	struct device *dev = i2400m_dev(i2400m);
+	struct i2400m_report_hook_args *args, *args_next;
+	LIST_HEAD(list);
+	unsigned long flags;
+
+	while (1) {
+		spin_lock_irqsave(&i2400m->rx_lock, flags);
+		list_splice_init(&i2400m->rx_reports, &list);
+		spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+		if (list_empty(&list))
+			break;
+		else
+			d_printf(1, dev, "processing queued reports\n");
+		list_for_each_entry_safe(args, args_next, &list, list_node) {
+			d_printf(2, dev, "processing queued report %p\n", args);
+			i2400m_report_hook(i2400m, args->l3l4_hdr, args->size);
+			kfree_skb(args->skb_rx);
+			list_del(&args->list_node);
+			kfree(args);
+		}
+	}
+}
+
+
+/*
+ * Flush the list of queued reports
+ */
+static
+void i2400m_report_hook_flush(struct i2400m *i2400m)
+{
+	struct device *dev = i2400m_dev(i2400m);
+	struct i2400m_report_hook_args *args, *args_next;
+	LIST_HEAD(list);
+	unsigned long flags;
+
+	d_printf(1, dev, "flushing queued reports\n");
+	spin_lock_irqsave(&i2400m->rx_lock, flags);
+	list_splice_init(&i2400m->rx_reports, &list);
+	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+	list_for_each_entry_safe(args, args_next, &list, list_node) {
+		d_printf(2, dev, "flushing queued report %p\n", args);
+		kfree_skb(args->skb_rx);
+		list_del(&args->list_node);
+		kfree(args);
+	}
+}
+
+
+/*
+ * Queue a report for later processing
+ *
+ * @i2400m: device descriptor
+ * @skb_rx: skb that contains the payload (for reference counting)
+ * @l3l4_hdr: pointer to the control
+ * @size: size of the message
+ */
+static
+void i2400m_report_hook_queue(struct i2400m *i2400m, struct sk_buff *skb_rx,
+			      const void *l3l4_hdr, size_t size)
+{
+	struct device *dev = i2400m_dev(i2400m);
+	unsigned long flags;
+	struct i2400m_report_hook_args *args;
+
+	args = kzalloc(sizeof(*args), GFP_NOIO);
+	if (args) {
+		args->skb_rx = skb_get(skb_rx);
+		args->l3l4_hdr = l3l4_hdr;
+		args->size = size;
+		spin_lock_irqsave(&i2400m->rx_lock, flags);
+		list_add_tail(&args->list_node, &i2400m->rx_reports);
+		spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+		d_printf(2, dev, "queued report %p\n", args);
+		rmb();		/* see i2400m->ready's documentation  */
+		if (likely(i2400m->ready))	/* only send if up */
+			queue_work(i2400m->work_queue, &i2400m->rx_report_ws);
+	} else  {
+		if (printk_ratelimit())
+			dev_err(dev, "%s:%u: Can't allocate %zu B\n",
+				__func__, __LINE__, sizeof(*args));
+	}
 }
 
 
@@ -295,21 +369,29 @@
 		 msg_type, size);
 	d_dump(2, dev, l3l4_hdr, size);
 	if (msg_type & I2400M_MT_REPORT_MASK) {
-		/* These hooks have to be ran serialized; as well, the
-		 * handling might force the execution of commands, and
-		 * that might cause reentrancy issues with
-		 * bus-specific subdrivers and workqueues. So we run
-		 * it in a separate workqueue. */
-		struct i2400m_report_hook_args args = {
-			.skb_rx = skb_rx,
-			.l3l4_hdr = l3l4_hdr,
-			.size = size
-		};
-		if (unlikely(i2400m->ready == 0))	/* only send if up */
-			return;
-		skb_get(skb_rx);
-		i2400m_queue_work(i2400m, i2400m_report_hook_work,
-				  GFP_KERNEL, &args, sizeof(args));
+		/*
+		 * Process each report
+		 *
+		 * - has to be ran serialized as well
+		 *
+		 * - the handling might force the execution of
+		 *   commands. That might cause reentrancy issues with
+		 *   bus-specific subdrivers and workqueues, so the we
+		 *   run it in a separate workqueue.
+		 *
+		 * - when the driver is not yet ready to handle them,
+		 *   they are queued and at some point the queue is
+		 *   restarted [NOTE: we can't queue SKBs directly, as
+		 *   this might be a piece of a SKB, not the whole
+		 *   thing, and this is cheaper than cloning the
+		 *   SKB].
+		 *
+		 * Note we don't do refcounting for the device
+		 * structure; this is because before destroying
+		 * 'i2400m', we make sure to flush the
+		 * i2400m->work_queue, so there are no issues.
+		 */
+		i2400m_report_hook_queue(i2400m, skb_rx, l3l4_hdr, size);
 		if (unlikely(i2400m->trace_msg_from_user))
 			wimax_msg(&i2400m->wimax_dev, "echo",
 				  l3l4_hdr, size, GFP_KERNEL);
@@ -363,8 +445,6 @@
 		 msg_type & I2400M_MT_REPORT_MASK ? "REPORT" : "CMD/SET/GET",
 		 msg_type, size);
 	d_dump(2, dev, l3l4_hdr, size);
-	if (unlikely(i2400m->ready == 0))	/* only send if up */
-		return;
 	result = wimax_msg(wimax_dev, "trace", l3l4_hdr, size, GFP_KERNEL);
 	if (result < 0)
 		dev_err(dev, "error sending trace to userspace: %d\n",
@@ -748,7 +828,7 @@
 		dev_err(dev, "SW BUG? queue nsn %d (lbn %u ws %u)\n",
 			nsn, lbn, roq->ws);
 		i2400m_roq_log_dump(i2400m, roq);
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 	} else {
 		__i2400m_roq_queue(i2400m, roq, skb, lbn, nsn);
 		i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET,
@@ -814,7 +894,7 @@
 		dev_err(dev, "SW BUG? queue_update_ws nsn %u (sn %u ws %u)\n",
 			nsn, sn, roq->ws);
 		i2400m_roq_log_dump(i2400m, roq);
-		i2400m->bus_reset(i2400m, I2400M_RT_WARM);
+		i2400m_reset(i2400m, I2400M_RT_WARM);
 	} else {
 		/* if the queue is empty, don't bother as we'd queue
 		 * it and inmediately unqueue it -- just deliver it */
@@ -1194,6 +1274,28 @@
 EXPORT_SYMBOL_GPL(i2400m_rx);
 
 
+void i2400m_unknown_barker(struct i2400m *i2400m,
+			   const void *buf, size_t size)
+{
+	struct device *dev = i2400m_dev(i2400m);
+	char prefix[64];
+	const __le32 *barker = buf;
+	dev_err(dev, "RX: HW BUG? unknown barker %08x, "
+		"dropping %zu bytes\n", le32_to_cpu(*barker), size);
+	snprintf(prefix, sizeof(prefix), "%s %s: ",
+		 dev_driver_string(dev), dev_name(dev));
+	if (size > 64) {
+		print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET,
+			       8, 4, buf, 64, 0);
+		printk(KERN_ERR "%s... (only first 64 bytes "
+		       "dumped)\n", prefix);
+	} else
+		print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET,
+			       8, 4, buf, size, 0);
+}
+EXPORT_SYMBOL(i2400m_unknown_barker);
+
+
 /*
  * Initialize the RX queue and infrastructure
  *
@@ -1261,4 +1363,6 @@
 		kfree(i2400m->rx_roq[0].log);
 		kfree(i2400m->rx_roq);
 	}
+	/* at this point, nothing can be received... */
+	i2400m_report_hook_flush(i2400m);
 }
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
index 7d6ec0f..8e02541 100644
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ b/drivers/net/wimax/i2400m/sdio-fw.c
@@ -118,7 +118,8 @@
 	if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
 		goto error_too_big;
 
-	memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size);	/* Prep command */
+	if (_cmd != i2400m->bm_cmd_buf)
+		memmove(i2400m->bm_cmd_buf, _cmd, cmd_size);
 	cmd = i2400m->bm_cmd_buf;
 	if (cmd_size_a > cmd_size)			/* Zero pad space */
 		memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
@@ -177,10 +178,6 @@
 	d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
 		  i2400m, ack, ack_size);
 
-	spin_lock(&i2400m->rx_lock);
-	i2400ms->bm_ack_size = -EINPROGRESS;
-	spin_unlock(&i2400m->rx_lock);
-
 	result = wait_event_timeout(i2400ms->bm_wfa_wq,
 				    i2400ms->bm_ack_size != -EINPROGRESS,
 				    2 * HZ);
@@ -199,6 +196,10 @@
 		size = min(ack_size, i2400ms->bm_ack_size);
 		memcpy(ack, i2400m->bm_ack_buf, size);
 	}
+	/*
+	 * Remember always to clear the bm_ack_size to -EINPROGRESS
+	 * after the RX data is processed
+	 */
 	i2400ms->bm_ack_size = -EINPROGRESS;
 	spin_unlock(&i2400m->rx_lock);
 
diff --git a/drivers/net/wimax/i2400m/sdio-rx.c b/drivers/net/wimax/i2400m/sdio-rx.c
index 321bead..8adf6c9 100644
--- a/drivers/net/wimax/i2400m/sdio-rx.c
+++ b/drivers/net/wimax/i2400m/sdio-rx.c
@@ -53,6 +53,7 @@
  * i2400ms_irq()
  *   i2400ms_rx()
  *     __i2400ms_rx_get_size()
+ *     i2400m_is_boot_barker()
  *     i2400m_rx()
  *
  * i2400ms_rx_setup()
@@ -138,6 +139,11 @@
 		ret = rx_size;
 		goto error_get_size;
 	}
+	/*
+	 * Hardware quirk: make sure to clear the INTR status register
+	 * AFTER getting the data transfer size.
+	 */
+	sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
 
 	ret = -ENOMEM;
 	skb = alloc_skb(rx_size, GFP_ATOMIC);
@@ -153,25 +159,34 @@
 	}
 
 	rmb();	/* make sure we get boot_mode from dev_reset_handle */
-	if (i2400m->boot_mode == 1) {
+	if (unlikely(i2400m->boot_mode == 1)) {
 		spin_lock(&i2400m->rx_lock);
 		i2400ms->bm_ack_size = rx_size;
 		spin_unlock(&i2400m->rx_lock);
 		memcpy(i2400m->bm_ack_buf, skb->data, rx_size);
 		wake_up(&i2400ms->bm_wfa_wq);
-		dev_err(dev, "RX: SDIO boot mode message\n");
+		d_printf(5, dev, "RX: SDIO boot mode message\n");
 		kfree_skb(skb);
-	} else if (unlikely(!memcmp(skb->data, i2400m_NBOOT_BARKER,
-				    sizeof(i2400m_NBOOT_BARKER))
-			    || !memcmp(skb->data, i2400m_SBOOT_BARKER,
-				       sizeof(i2400m_SBOOT_BARKER)))) {
-		ret = i2400m_dev_reset_handle(i2400m);
+		goto out;
+	}
+	ret = -EIO;
+	if (unlikely(rx_size < sizeof(__le32))) {
+		dev_err(dev, "HW BUG? only %zu bytes received\n", rx_size);
+		goto error_bad_size;
+	}
+	if (likely(i2400m_is_d2h_barker(skb->data))) {
+		skb_put(skb, rx_size);
+		i2400m_rx(i2400m, skb);
+	} else if (unlikely(i2400m_is_boot_barker(i2400m,
+						  skb->data, rx_size))) {
+		ret = i2400m_dev_reset_handle(i2400m, "device rebooted");
 		dev_err(dev, "RX: SDIO reboot barker\n");
 		kfree_skb(skb);
 	} else {
-		skb_put(skb, rx_size);
-		i2400m_rx(i2400m, skb);
+		i2400m_unknown_barker(i2400m, skb->data, rx_size);
+		kfree_skb(skb);
 	}
+out:
 	d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms);
 	return;
 
@@ -179,6 +194,7 @@
 	kfree_skb(skb);
 error_alloc_skb:
 error_get_size:
+error_bad_size:
 	d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret);
 	return;
 }
@@ -209,7 +225,6 @@
 		dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n");
 		goto error_no_irq;
 	}
-	sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
 	i2400ms_rx(i2400ms);
 error_no_irq:
 	d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
@@ -234,6 +249,13 @@
 	init_waitqueue_head(&i2400ms->bm_wfa_wq);
 	spin_lock(&i2400m->rx_lock);
 	i2400ms->bm_wait_result = -EINPROGRESS;
+	/*
+	 * Before we are about to enable the RX interrupt, make sure
+	 * bm_ack_size is cleared to -EINPROGRESS which indicates
+	 * no RX interrupt happened yet or the previous interrupt
+	 * has been handled, we are ready to take the new interrupt
+	 */
+	i2400ms->bm_ack_size = -EINPROGRESS;
 	spin_unlock(&i2400m->rx_lock);
 
 	sdio_claim_host(func);
diff --git a/drivers/net/wimax/i2400m/sdio-tx.c b/drivers/net/wimax/i2400m/sdio-tx.c
index 5105a5e..de66d06 100644
--- a/drivers/net/wimax/i2400m/sdio-tx.c
+++ b/drivers/net/wimax/i2400m/sdio-tx.c
@@ -149,5 +149,8 @@
 
 void i2400ms_tx_release(struct i2400ms *i2400ms)
 {
-	destroy_workqueue(i2400ms->tx_workqueue);
+	if (i2400ms->tx_workqueue) {
+		destroy_workqueue(i2400ms->tx_workqueue);
+		i2400ms->tx_workqueue = NULL;
+	}
 }
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 2981e21..76a50ac 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -43,18 +43,9 @@
  *     i2400m_release()
  *     free_netdev(net_dev)
  *
- * i2400ms_bus_reset()            Called by i2400m->bus_reset
+ * i2400ms_bus_reset()            Called by i2400m_reset
  *   __i2400ms_reset()
  *     __i2400ms_send_barker()
- *
- * i2400ms_bus_dev_start()        Called by i2400m_dev_start() [who is
- *   i2400ms_tx_setup()           called by i2400m_setup()]
- *   i2400ms_rx_setup()
- *
- * i2400ms_bus_dev_stop()         Called by i2400m_dev_stop() [who is
- *   i2400ms_rx_release()         is called by i2400m_release()]
- *   i2400ms_tx_release()
- *
  */
 
 #include <linux/debugfs.h>
@@ -71,6 +62,14 @@
 static int ioe_timeout = 2;
 module_param(ioe_timeout, int, 0);
 
+static char i2400ms_debug_params[128];
+module_param_string(debug, i2400ms_debug_params, sizeof(i2400ms_debug_params),
+		    0644);
+MODULE_PARM_DESC(debug,
+		 "String of space-separated NAME:VALUE pairs, where NAMEs "
+		 "are the different debug submodules and VALUE are the "
+		 "initial debug value to set.");
+
 /* Our firmware file name list */
 static const char *i2400ms_bus_fw_names[] = {
 #define I2400MS_FW_FILE_NAME "i2400m-fw-sdio-1.3.sbcf"
@@ -95,17 +94,24 @@
  * when we ask it to explicitly doing). Tries until a timeout is
  * reached.
  *
+ * The @maxtries argument indicates how many times (at most) it should
+ * be tried to enable the function. 0 means forever. This acts along
+ * with the timeout (ie: it'll stop trying as soon as the maximum
+ * number of tries is reached _or_ as soon as the timeout is reached).
+ *
  * The reverse of this is...sdio_disable_function()
  *
  * Returns: 0 if the SDIO function was enabled, < 0 errno code on
  *     error (-ENODEV when it was unable to enable the function).
  */
 static
-int i2400ms_enable_function(struct sdio_func *func)
+int i2400ms_enable_function(struct i2400ms *i2400ms, unsigned maxtries)
 {
+	struct sdio_func *func = i2400ms->func;
 	u64 timeout;
 	int err;
 	struct device *dev = &func->dev;
+	unsigned tries = 0;
 
 	d_fnstart(3, dev, "(func %p)\n", func);
 	/* Setup timeout (FIXME: This needs to read the CIS table to
@@ -115,6 +121,14 @@
 	err = -ENODEV;
 	while (err != 0 && time_before64(get_jiffies_64(), timeout)) {
 		sdio_claim_host(func);
+		/*
+		 * There is a sillicon bug on the IWMC3200, where the
+		 * IOE timeout will cause problems on Moorestown
+		 * platforms (system hang). We explicitly overwrite
+		 * func->enable_timeout here to work around the issue.
+		 */
+		if (i2400ms->iwmc3200)
+			func->enable_timeout = IWMC3200_IOR_TIMEOUT;
 		err = sdio_enable_func(func);
 		if (0 == err) {
 			sdio_release_host(func);
@@ -122,8 +136,11 @@
 			goto function_enabled;
 		}
 		d_printf(2, dev, "SDIO function failed to enable: %d\n", err);
-		sdio_disable_func(func);
 		sdio_release_host(func);
+		if (maxtries > 0 && ++tries >= maxtries) {
+			err = -ETIME;
+			break;
+		}
 		msleep(I2400MS_INIT_SLEEP_INTERVAL);
 	}
 	/* If timed out, device is not there yet -- get -ENODEV so
@@ -140,6 +157,81 @@
 
 
 /*
+ * Setup minimal device communication infrastructure needed to at
+ * least be able to update the firmware.
+ *
+ * Note the ugly trick: if we are in the probe path
+ * (i2400ms->debugfs_dentry == NULL), we only retry function
+ * enablement one, to avoid racing with the iwmc3200 top controller.
+ */
+static
+int i2400ms_bus_setup(struct i2400m *i2400m)
+{
+	int result;
+	struct i2400ms *i2400ms =
+		container_of(i2400m, struct i2400ms, i2400m);
+	struct device *dev = i2400m_dev(i2400m);
+	struct sdio_func *func = i2400ms->func;
+	int retries;
+
+	sdio_claim_host(func);
+	result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
+	sdio_release_host(func);
+	if (result < 0) {
+		dev_err(dev, "Failed to set block size: %d\n", result);
+		goto error_set_blk_size;
+	}
+
+	if (i2400ms->iwmc3200 && i2400ms->debugfs_dentry == NULL)
+		retries = 1;
+	else
+		retries = 0;
+	result = i2400ms_enable_function(i2400ms, retries);
+	if (result < 0) {
+		dev_err(dev, "Cannot enable SDIO function: %d\n", result);
+		goto error_func_enable;
+	}
+
+	result = i2400ms_tx_setup(i2400ms);
+	if (result < 0)
+		goto error_tx_setup;
+	result = i2400ms_rx_setup(i2400ms);
+	if (result < 0)
+		goto error_rx_setup;
+	return 0;
+
+error_rx_setup:
+	i2400ms_tx_release(i2400ms);
+error_tx_setup:
+	sdio_claim_host(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+error_func_enable:
+error_set_blk_size:
+	return result;
+}
+
+
+/*
+ * Tear down minimal device communication infrastructure needed to at
+ * least be able to update the firmware.
+ */
+static
+void i2400ms_bus_release(struct i2400m *i2400m)
+{
+	struct i2400ms *i2400ms =
+		container_of(i2400m, struct i2400ms, i2400m);
+	struct sdio_func *func = i2400ms->func;
+
+	i2400ms_rx_release(i2400ms);
+	i2400ms_tx_release(i2400ms);
+	sdio_claim_host(func);
+	sdio_disable_func(func);
+	sdio_release_host(func);
+}
+
+
+/*
  * Setup driver resources needed to communicate with the device
  *
  * The fw needs some time to settle, and it was just uploaded,
@@ -150,36 +242,14 @@
 static
 int i2400ms_bus_dev_start(struct i2400m *i2400m)
 {
-	int result;
 	struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
 	struct sdio_func *func = i2400ms->func;
 	struct device *dev = &func->dev;
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 	msleep(200);
-	result = i2400ms_tx_setup(i2400ms);
-	if (result < 0)
-		goto error_tx_setup;
-	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, result);
-	return result;
-
-error_tx_setup:
-	i2400ms_tx_release(i2400ms);
-	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
-	return result;
-}
-
-
-static
-void i2400ms_bus_dev_stop(struct i2400m *i2400m)
-{
-	struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
-	struct sdio_func *func = i2400ms->func;
-	struct device *dev = &func->dev;
-
-	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
-	i2400ms_tx_release(i2400ms);
-	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
+	d_fnend(3, dev, "(i2400m %p) = %d\n", i2400m, 0);
+	return 0;
 }
 
 
@@ -233,18 +303,17 @@
  * Warm reset:
  *
  * The device will be fully reset internally, but won't be
- * disconnected from the USB bus (so no reenumeration will
+ * disconnected from the bus (so no reenumeration will
  * happen). Firmware upload will be neccessary.
  *
- * The device will send a reboot barker in the notification endpoint
- * that will trigger the driver to reinitialize the state
- * automatically from notif.c:i2400m_notification_grok() into
- * i2400m_dev_bootstrap_delayed().
+ * The device will send a reboot barker that will trigger the driver
+ * to reinitialize the state via __i2400m_dev_reset_handle.
  *
- * Cold and bus (USB) reset:
+ *
+ * Cold and bus reset:
  *
  * The device will be fully reset internally, disconnected from the
- * USB bus an a reenumeration will happen. Firmware upload will be
+ * bus an a reenumeration will happen. Firmware upload will be
  * neccessary. Thus, we don't do any locking or struct
  * reinitialization, as we are going to be fully disconnected and
  * reenumerated.
@@ -283,25 +352,13 @@
 					       sizeof(i2400m_COLD_BOOT_BARKER));
 	else if (rt == I2400M_RT_BUS) {
 do_bus_reset:
-		/* call netif_tx_disable() before sending IOE disable,
-		 * so that all the tx from network layer are stopped
-		 * while IOE is being reset. Make sure it is called
-		 * only after register_netdev() was issued.
-		 */
-		if (i2400m->wimax_dev.net_dev->reg_state == NETREG_REGISTERED)
-			netif_tx_disable(i2400m->wimax_dev.net_dev);
 
-		i2400ms_rx_release(i2400ms);
-		sdio_claim_host(i2400ms->func);
-		sdio_disable_func(i2400ms->func);
-		sdio_release_host(i2400ms->func);
+		i2400ms_bus_release(i2400m);
 
 		/* Wait for the device to settle */
 		msleep(40);
 
-		result = i2400ms_enable_function(i2400ms->func);
-		if (result >= 0)
-			i2400ms_rx_setup(i2400ms);
+		result =  i2400ms_bus_setup(i2400m);
 	} else
 		BUG();
 	if (result < 0 && rt != I2400M_RT_BUS) {
@@ -350,7 +407,7 @@
 	int result;
 	struct dentry *dentry = i2400ms->i2400m.wimax_dev.debugfs_dentry;
 
-	dentry = debugfs_create_dir("i2400m-usb", dentry);
+	dentry = debugfs_create_dir("i2400m-sdio", dentry);
 	result = PTR_ERR(dentry);
 	if (IS_ERR(dentry)) {
 		if (result == -ENODEV)
@@ -367,6 +424,7 @@
 
 error:
 	debugfs_remove_recursive(i2400ms->debugfs_dentry);
+	i2400ms->debugfs_dentry = NULL;
 	return result;
 }
 
@@ -425,37 +483,30 @@
 
 	i2400m->bus_tx_block_size = I2400MS_BLK_SIZE;
 	i2400m->bus_pl_size_max = I2400MS_PL_SIZE_MAX;
+	i2400m->bus_setup = i2400ms_bus_setup;
 	i2400m->bus_dev_start = i2400ms_bus_dev_start;
-	i2400m->bus_dev_stop = i2400ms_bus_dev_stop;
+	i2400m->bus_dev_stop = NULL;
+	i2400m->bus_release = i2400ms_bus_release;
 	i2400m->bus_tx_kick = i2400ms_bus_tx_kick;
 	i2400m->bus_reset = i2400ms_bus_reset;
 	/* The iwmc3200-wimax sometimes requires the driver to try
 	 * hard when we paint it into a corner. */
-	i2400m->bus_bm_retries = I3200_BOOT_RETRIES;
+	i2400m->bus_bm_retries = I2400M_SDIO_BOOT_RETRIES;
 	i2400m->bus_bm_cmd_send = i2400ms_bus_bm_cmd_send;
 	i2400m->bus_bm_wait_for_ack = i2400ms_bus_bm_wait_for_ack;
 	i2400m->bus_fw_names = i2400ms_bus_fw_names;
 	i2400m->bus_bm_mac_addr_impaired = 1;
 	i2400m->bus_bm_pokes_table = &i2400ms_pokes[0];
 
-	sdio_claim_host(func);
-	result = sdio_set_block_size(func, I2400MS_BLK_SIZE);
-	sdio_release_host(func);
-	if (result < 0) {
-		dev_err(dev, "Failed to set block size: %d\n", result);
-		goto error_set_blk_size;
+	switch (func->device) {
+	case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX:
+	case SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5:
+		i2400ms->iwmc3200 = 1;
+		break;
+	default:
+		i2400ms->iwmc3200 = 0;
 	}
 
-	result = i2400ms_enable_function(i2400ms->func);
-	if (result < 0) {
-		dev_err(dev, "Cannot enable SDIO function: %d\n", result);
-		goto error_func_enable;
-	}
-
-	result = i2400ms_rx_setup(i2400ms);
-	if (result < 0)
-		goto error_rx_setup;
-
 	result = i2400m_setup(i2400m, I2400M_BRI_NO_REBOOT);
 	if (result < 0) {
 		dev_err(dev, "cannot setup device: %d\n", result);
@@ -473,13 +524,6 @@
 error_debugfs_add:
 	i2400m_release(i2400m);
 error_setup:
-	i2400ms_rx_release(i2400ms);
-error_rx_setup:
-	sdio_claim_host(func);
-	sdio_disable_func(func);
-	sdio_release_host(func);
-error_func_enable:
-error_set_blk_size:
 	sdio_set_drvdata(func, NULL);
 	free_netdev(net_dev);
 error_alloc_netdev:
@@ -497,12 +541,9 @@
 
 	d_fnstart(3, dev, "SDIO func %p\n", func);
 	debugfs_remove_recursive(i2400ms->debugfs_dentry);
-	i2400ms_rx_release(i2400ms);
+	i2400ms->debugfs_dentry = NULL;
 	i2400m_release(i2400m);
 	sdio_set_drvdata(func, NULL);
-	sdio_claim_host(func);
-	sdio_disable_func(func);
-	sdio_release_host(func);
 	free_netdev(net_dev);
 	d_fnend(3, dev, "SDIO func %p\n", func);
 }
@@ -512,6 +553,8 @@
 	/* Intel: i2400m WiMAX (iwmc3200) over SDIO */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
 		      SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX) },
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
+		      SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5) },
 	{ /* end: all zeroes */ },
 };
 MODULE_DEVICE_TABLE(sdio, i2400ms_sdio_ids);
@@ -529,6 +572,8 @@
 static
 int __init i2400ms_driver_init(void)
 {
+	d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400ms_debug_params,
+		       "i2400m_sdio.debug");
 	return sdio_register_driver(&i2400m_sdio_driver);
 }
 module_init(i2400ms_driver_init);
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index fa16ccf..54480e8 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -310,7 +310,7 @@
 	size_t tail_room;
 	size_t tx_in;
 
-	if (unlikely(i2400m->tx_in) == 0)
+	if (unlikely(i2400m->tx_in == 0))
 		return I2400M_TX_BUF_SIZE;
 	tx_in = i2400m->tx_in % I2400M_TX_BUF_SIZE;
 	tail_room = I2400M_TX_BUF_SIZE - tx_in;
@@ -642,6 +642,9 @@
 	 * current one is out of payload slots or we have a singleton,
 	 * close it and start a new one */
 	spin_lock_irqsave(&i2400m->tx_lock, flags);
+	result = -ESHUTDOWN;
+	if (i2400m->tx_buf == NULL)
+		goto error_tx_new;
 try_new:
 	if (unlikely(i2400m->tx_msg == NULL))
 		i2400m_tx_new(i2400m);
@@ -697,7 +700,10 @@
 	}
 error_tx_new:
 	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
-	i2400m->bus_tx_kick(i2400m);	/* always kick, might free up space */
+	/* kick in most cases, except when the TX subsys is down, as
+	 * it might free space */
+	if (likely(result != -ESHUTDOWN))
+		i2400m->bus_tx_kick(i2400m);
 	d_fnend(3, dev, "(i2400m %p skb %p [%zu bytes] pt %u) = %d\n",
 		i2400m, buf, buf_len, pl_type, result);
 	return result;
@@ -740,6 +746,9 @@
 
 	d_fnstart(3, dev, "(i2400m %p bus_size %p)\n", i2400m, bus_size);
 	spin_lock_irqsave(&i2400m->tx_lock, flags);
+	tx_msg_moved = NULL;
+	if (i2400m->tx_buf == NULL)
+		goto out_unlock;
 skip:
 	tx_msg_moved = NULL;
 	if (i2400m->tx_in == i2400m->tx_out) {	/* Empty FIFO? */
@@ -829,6 +838,8 @@
 
 	d_fnstart(3, dev, "(i2400m %p)\n", i2400m);
 	spin_lock_irqsave(&i2400m->tx_lock, flags);
+	if (i2400m->tx_buf == NULL)
+		goto out_unlock;
 	i2400m->tx_out += i2400m->tx_msg_size;
 	d_printf(2, dev, "TX: sent %zu b\n", (size_t) i2400m->tx_msg_size);
 	i2400m->tx_msg_size = 0;
@@ -837,6 +848,7 @@
 	n = i2400m->tx_out / I2400M_TX_BUF_SIZE;
 	i2400m->tx_out %= I2400M_TX_BUF_SIZE;
 	i2400m->tx_in -= n * I2400M_TX_BUF_SIZE;
+out_unlock:
 	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
 	d_fnend(3, dev, "(i2400m %p) = void\n", i2400m);
 }
@@ -876,5 +888,9 @@
  */
 void i2400m_tx_release(struct i2400m *i2400m)
 {
+	unsigned long flags;
+	spin_lock_irqsave(&i2400m->tx_lock, flags);
 	kfree(i2400m->tx_buf);
+	i2400m->tx_buf = NULL;
+	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
 }
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index 5ad287c..ce6b993 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -99,10 +99,10 @@
 		dev_err(dev, "BM-CMD: can't get autopm: %d\n", result);
 		do_autopm = 0;
 	}
-	epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_BULK_OUT);
+	epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out);
 	pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 retry:
-	result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, HZ);
+	result = usb_bulk_msg(i2400mu->usb_dev, pipe, buf, buf_size, &len, 200);
 	switch (result) {
 	case 0:
 		if (len != buf_size) {
@@ -113,6 +113,28 @@
 		}
 		result = len;
 		break;
+	case -EPIPE:
+		/*
+		 * Stall -- maybe the device is choking with our
+		 * requests. Clear it and give it some time. If they
+		 * happen to often, it might be another symptom, so we
+		 * reset.
+		 *
+		 * No error handling for usb_clear_halt(0; if it
+		 * works, the retry works; if it fails, this switch
+		 * does the error handling for us.
+		 */
+		if (edc_inc(&i2400mu->urb_edc,
+			    10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "BM-CMD: too many stalls in "
+				"URB; resetting device\n");
+			usb_queue_reset_device(i2400mu->usb_iface);
+			/* fallthrough */
+		} else {
+			usb_clear_halt(i2400mu->usb_dev, pipe);
+			msleep(10);	/* give the device some time */
+			goto retry;
+		}
 	case -EINVAL:			/* while removing driver */
 	case -ENODEV:			/* dev disconnect ... */
 	case -ENOENT:			/* just ignore it */
@@ -135,7 +157,6 @@
 			result);
 		goto retry;
 	}
-	result = len;
 	if (do_autopm)
 		usb_autopm_put_interface(i2400mu->usb_iface);
 	return result;
@@ -172,7 +193,8 @@
 	result = -E2BIG;
 	if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
 		goto error_too_big;
-	memcpy(i2400m->bm_cmd_buf, _cmd, cmd_size);
+	if (_cmd != i2400m->bm_cmd_buf)
+		memmove(i2400m->bm_cmd_buf, _cmd, cmd_size);
 	cmd = i2400m->bm_cmd_buf;
 	if (cmd_size_a > cmd_size)			/* Zero pad space */
 		memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
@@ -226,7 +248,8 @@
 	struct usb_endpoint_descriptor *epd;
 	int pipe;
 
-	epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_NOTIFICATION);
+	epd = usb_get_epd(i2400mu->usb_iface,
+			  i2400mu->endpoint_cfg.notification);
 	pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 	usb_fill_int_urb(urb, i2400mu->usb_dev, pipe,
 			 i2400m->bm_ack_buf, I2400M_BM_ACK_BUF_SIZE,
@@ -328,8 +351,8 @@
 out:
 	if (do_autopm)
 		usb_autopm_put_interface(i2400mu->usb_iface);
-	d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %zd\n",
-		i2400m, ack, ack_size, result);
+	d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
+		i2400m, ack, ack_size, (long) result);
 	return result;
 
 error_exceeded:
diff --git a/drivers/net/wimax/i2400m/usb-notif.c b/drivers/net/wimax/i2400m/usb-notif.c
index 6add27c..f88d1c6 100644
--- a/drivers/net/wimax/i2400m/usb-notif.c
+++ b/drivers/net/wimax/i2400m/usb-notif.c
@@ -51,6 +51,7 @@
  *
  * i2400mu_usb_notification_cb()	Called when a URB is ready
  *   i2400mu_notif_grok()
+ *     i2400m_is_boot_barker()
  *     i2400m_dev_reset_handle()
  *     i2400mu_rx_kick()
  */
@@ -87,32 +88,21 @@
 	d_fnstart(4, dev, "(i2400m %p buf %p buf_len %zu)\n",
 		  i2400mu, buf, buf_len);
 	ret = -EIO;
-	if (buf_len < sizeof(i2400m_NBOOT_BARKER))
+	if (buf_len < sizeof(i2400m_ZERO_BARKER))
 		/* Not a bug, just ignore */
 		goto error_bad_size;
-	if (!memcmp(i2400m_NBOOT_BARKER, buf, sizeof(i2400m_NBOOT_BARKER))
-	    || !memcmp(i2400m_SBOOT_BARKER, buf, sizeof(i2400m_SBOOT_BARKER)))
-		ret = i2400m_dev_reset_handle(i2400m);
-	else if (!memcmp(i2400m_ZERO_BARKER, buf, sizeof(i2400m_ZERO_BARKER))) {
+	ret = 0;
+	if (!memcmp(i2400m_ZERO_BARKER, buf, sizeof(i2400m_ZERO_BARKER))) {
 		i2400mu_rx_kick(i2400mu);
-		ret = 0;
-	} else {	/* Unknown or unexpected data in the notif message */
-		char prefix[64];
-		ret = -EIO;
-		dev_err(dev, "HW BUG? Unknown/unexpected data in notification "
-			"message (%zu bytes)\n", buf_len);
-		snprintf(prefix, sizeof(prefix), "%s %s: ",
-			 dev_driver_string(dev), dev_name(dev));
-		if (buf_len > 64) {
-			print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET,
-				       8, 4, buf, 64, 0);
-			printk(KERN_ERR "%s... (only first 64 bytes "
-			       "dumped)\n", prefix);
-		} else
-			print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET,
-				       8, 4, buf, buf_len, 0);
+		goto out;
 	}
+	ret = i2400m_is_boot_barker(i2400m, buf, buf_len);
+	if (unlikely(ret >= 0))
+		ret = i2400m_dev_reset_handle(i2400m, "device rebooted");
+	else	/* Unknown or unexpected data in the notif message */
+		i2400m_unknown_barker(i2400m, buf, buf_len);
 error_bad_size:
+out:
 	d_fnend(4, dev, "(i2400m %p buf %p buf_len %zu) = %d\n",
 		i2400mu, buf, buf_len, ret);
 	return ret;
@@ -220,7 +210,8 @@
 		dev_err(dev, "notification: cannot allocate URB\n");
 		goto error_alloc_urb;
 	}
-	epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_NOTIFICATION);
+	epd = usb_get_epd(i2400mu->usb_iface,
+			  i2400mu->endpoint_cfg.notification);
 	usb_pipe = usb_rcvintpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 	usb_fill_int_urb(i2400mu->notif_urb, i2400mu->usb_dev, usb_pipe,
 			 buf, I2400MU_MAX_NOTIFICATION_LEN,
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index a314799..ba1b023 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -204,7 +204,7 @@
 		dev_err(dev, "RX: can't get autopm: %d\n", result);
 		do_autopm = 0;
 	}
-	epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_BULK_IN);
+	epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_in);
 	usb_pipe = usb_rcvbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 retry:
 	rx_size = skb_end_pointer(rx_skb) - rx_skb->data - rx_skb->len;
@@ -214,7 +214,7 @@
 	}
 	result = usb_bulk_msg(
 		i2400mu->usb_dev, usb_pipe, rx_skb->data + rx_skb->len,
-		rx_size, &read_size, HZ);
+		rx_size, &read_size, 200);
 	usb_mark_last_busy(i2400mu->usb_dev);
 	switch (result) {
 	case 0:
@@ -222,6 +222,26 @@
 			goto retry;	/* ZLP, just resubmit */
 		skb_put(rx_skb, read_size);
 		break;
+	case -EPIPE:
+		/*
+		 * Stall -- maybe the device is choking with our
+		 * requests. Clear it and give it some time. If they
+		 * happen to often, it might be another symptom, so we
+		 * reset.
+		 *
+		 * No error handling for usb_clear_halt(0; if it
+		 * works, the retry works; if it fails, this switch
+		 * does the error handling for us.
+		 */
+		if (edc_inc(&i2400mu->urb_edc,
+			    10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "BM-CMD: too many stalls in "
+				"URB; resetting device\n");
+			goto do_reset;
+		}
+		usb_clear_halt(i2400mu->usb_dev, usb_pipe);
+		msleep(10);	/* give the device some time */
+		goto retry;
 	case -EINVAL:			/* while removing driver */
 	case -ENODEV:			/* dev disconnect ... */
 	case -ENOENT:			/* just ignore it */
@@ -283,6 +303,7 @@
 error_reset:
 	dev_err(dev, "RX: maximum errors in URB exceeded; "
 		"resetting device\n");
+do_reset:
 	usb_queue_reset_device(i2400mu->usb_iface);
 	rx_skb = ERR_PTR(result);
 	goto out;
@@ -316,10 +337,15 @@
 	size_t pending;
 	int rx_size;
 	struct sk_buff *rx_skb;
+	unsigned long flags;
 
 	d_fnstart(4, dev, "(i2400mu %p)\n", i2400mu);
+	spin_lock_irqsave(&i2400m->rx_lock, flags);
+	BUG_ON(i2400mu->rx_kthread != NULL);
+	i2400mu->rx_kthread = current;
+	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 	while (1) {
-		d_printf(2, dev, "TX: waiting for messages\n");
+		d_printf(2, dev, "RX: waiting for messages\n");
 		pending = 0;
 		wait_event_interruptible(
 			i2400mu->rx_wq,
@@ -367,6 +393,9 @@
 	}
 	result = 0;
 out:
+	spin_lock_irqsave(&i2400m->rx_lock, flags);
+	i2400mu->rx_kthread = NULL;
+	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
 	d_fnend(4, dev, "(i2400mu %p) = %d\n", i2400mu, result);
 	return result;
 
@@ -403,18 +432,33 @@
 	struct i2400m *i2400m = &i2400mu->i2400m;
 	struct device *dev = &i2400mu->usb_iface->dev;
 	struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+	struct task_struct *kthread;
 
-	i2400mu->rx_kthread = kthread_run(i2400mu_rxd, i2400mu, "%s-rx",
-					  wimax_dev->name);
-	if (IS_ERR(i2400mu->rx_kthread)) {
-		result = PTR_ERR(i2400mu->rx_kthread);
+	kthread = kthread_run(i2400mu_rxd, i2400mu, "%s-rx",
+			      wimax_dev->name);
+	/* the kthread function sets i2400mu->rx_thread */
+	if (IS_ERR(kthread)) {
+		result = PTR_ERR(kthread);
 		dev_err(dev, "RX: cannot start thread: %d\n", result);
 	}
 	return result;
 }
 
+
 void i2400mu_rx_release(struct i2400mu *i2400mu)
 {
-	kthread_stop(i2400mu->rx_kthread);
+	unsigned long flags;
+	struct i2400m *i2400m = &i2400mu->i2400m;
+	struct device *dev = i2400m_dev(i2400m);
+	struct task_struct *kthread;
+
+	spin_lock_irqsave(&i2400m->rx_lock, flags);
+	kthread = i2400mu->rx_kthread;
+	i2400mu->rx_kthread = NULL;
+	spin_unlock_irqrestore(&i2400m->rx_lock, flags);
+	if (kthread)
+		kthread_stop(kthread);
+	else
+		d_printf(1, dev, "RX: kthread had already exited\n");
 }
 
diff --git a/drivers/net/wimax/i2400m/usb-tx.c b/drivers/net/wimax/i2400m/usb-tx.c
index dfd8933..c65b997 100644
--- a/drivers/net/wimax/i2400m/usb-tx.c
+++ b/drivers/net/wimax/i2400m/usb-tx.c
@@ -101,11 +101,11 @@
 		dev_err(dev, "TX: can't get autopm: %d\n", result);
 		do_autopm = 0;
 	}
-	epd = usb_get_epd(i2400mu->usb_iface, I2400MU_EP_BULK_OUT);
+	epd = usb_get_epd(i2400mu->usb_iface, i2400mu->endpoint_cfg.bulk_out);
 	usb_pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 retry:
 	result = usb_bulk_msg(i2400mu->usb_dev, usb_pipe,
-			      tx_msg, tx_msg_size, &sent_size, HZ);
+			      tx_msg, tx_msg_size, &sent_size, 200);
 	usb_mark_last_busy(i2400mu->usb_dev);
 	switch (result) {
 	case 0:
@@ -115,6 +115,28 @@
 			result = -EIO;
 		}
 		break;
+	case -EPIPE:
+		/*
+		 * Stall -- maybe the device is choking with our
+		 * requests. Clear it and give it some time. If they
+		 * happen to often, it might be another symptom, so we
+		 * reset.
+		 *
+		 * No error handling for usb_clear_halt(0; if it
+		 * works, the retry works; if it fails, this switch
+		 * does the error handling for us.
+		 */
+		if (edc_inc(&i2400mu->urb_edc,
+			    10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "BM-CMD: too many stalls in "
+				"URB; resetting device\n");
+			usb_queue_reset_device(i2400mu->usb_iface);
+			/* fallthrough */
+		} else {
+			usb_clear_halt(i2400mu->usb_dev, usb_pipe);
+			msleep(10);	/* give the device some time */
+			goto retry;
+		}
 	case -EINVAL:			/* while removing driver */
 	case -ENODEV:			/* dev disconnect ... */
 	case -ENOENT:			/* just ignore it */
@@ -161,9 +183,15 @@
 	struct device *dev = &i2400mu->usb_iface->dev;
 	struct i2400m_msg_hdr *tx_msg;
 	size_t tx_msg_size;
+	unsigned long flags;
 
 	d_fnstart(4, dev, "(i2400mu %p)\n", i2400mu);
 
+	spin_lock_irqsave(&i2400m->tx_lock, flags);
+	BUG_ON(i2400mu->tx_kthread != NULL);
+	i2400mu->tx_kthread = current;
+	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
+
 	while (1) {
 		d_printf(2, dev, "TX: waiting for messages\n");
 		tx_msg = NULL;
@@ -183,6 +211,11 @@
 		if (result < 0)
 			break;
 	}
+
+	spin_lock_irqsave(&i2400m->tx_lock, flags);
+	i2400mu->tx_kthread = NULL;
+	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
+
 	d_fnend(4, dev, "(i2400mu %p) = %d\n", i2400mu, result);
 	return result;
 }
@@ -213,11 +246,13 @@
 	struct i2400m *i2400m = &i2400mu->i2400m;
 	struct device *dev = &i2400mu->usb_iface->dev;
 	struct wimax_dev *wimax_dev = &i2400m->wimax_dev;
+	struct task_struct *kthread;
 
-	i2400mu->tx_kthread = kthread_run(i2400mu_txd, i2400mu, "%s-tx",
-					  wimax_dev->name);
-	if (IS_ERR(i2400mu->tx_kthread)) {
-		result = PTR_ERR(i2400mu->tx_kthread);
+	kthread = kthread_run(i2400mu_txd, i2400mu, "%s-tx",
+			      wimax_dev->name);
+	/* the kthread function sets i2400mu->tx_thread */
+	if (IS_ERR(kthread)) {
+		result = PTR_ERR(kthread);
 		dev_err(dev, "TX: cannot start thread: %d\n", result);
 	}
 	return result;
@@ -225,5 +260,17 @@
 
 void i2400mu_tx_release(struct i2400mu *i2400mu)
 {
-	kthread_stop(i2400mu->tx_kthread);
+	unsigned long flags;
+	struct i2400m *i2400m = &i2400mu->i2400m;
+	struct device *dev = i2400m_dev(i2400m);
+	struct task_struct *kthread;
+
+	spin_lock_irqsave(&i2400m->tx_lock, flags);
+	kthread = i2400mu->tx_kthread;
+	i2400mu->tx_kthread = NULL;
+	spin_unlock_irqrestore(&i2400m->tx_lock, flags);
+	if (kthread)
+		kthread_stop(kthread);
+	else
+		d_printf(1, dev, "TX: kthread had already exited\n");
 }
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index 7eadd11..47e84ef 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -58,7 +58,7 @@
  *   i2400mu_rx_release()
  *   i2400mu_tx_release()
  *
- * i2400mu_bus_reset()            Called by i2400m->bus_reset
+ * i2400mu_bus_reset()            Called by i2400m_reset
  *   __i2400mu_reset()
  *     __i2400mu_send_barker()
  *   usb_reset_device()
@@ -71,13 +71,25 @@
 #define D_SUBMODULE usb
 #include "usb-debug-levels.h"
 
+static char i2400mu_debug_params[128];
+module_param_string(debug, i2400mu_debug_params, sizeof(i2400mu_debug_params),
+		    0644);
+MODULE_PARM_DESC(debug,
+		 "String of space-separated NAME:VALUE pairs, where NAMEs "
+		 "are the different debug submodules and VALUE are the "
+		 "initial debug value to set.");
 
 /* Our firmware file name */
-static const char *i2400mu_bus_fw_names[] = {
+static const char *i2400mu_bus_fw_names_5x50[] = {
 #define I2400MU_FW_FILE_NAME_v1_4 "i2400m-fw-usb-1.4.sbcf"
 	I2400MU_FW_FILE_NAME_v1_4,
-#define I2400MU_FW_FILE_NAME_v1_3 "i2400m-fw-usb-1.3.sbcf"
-	I2400MU_FW_FILE_NAME_v1_3,
+	NULL,
+};
+
+
+static const char *i2400mu_bus_fw_names_6050[] = {
+#define I6050U_FW_FILE_NAME_v1_5 "i6050-fw-usb-1.5.sbcf"
+	I6050U_FW_FILE_NAME_v1_5,
 	NULL,
 };
 
@@ -160,14 +172,59 @@
 	epd = usb_get_epd(i2400mu->usb_iface, endpoint);
 	pipe = usb_sndbulkpipe(i2400mu->usb_dev, epd->bEndpointAddress);
 	memcpy(buffer, barker, barker_size);
+retry:
 	ret = usb_bulk_msg(i2400mu->usb_dev, pipe, buffer, barker_size,
-			   &actual_len, HZ);
-	if (ret < 0) {
-		if (ret != -EINVAL)
-			dev_err(dev, "E: barker error: %d\n", ret);
-	} else if (actual_len != barker_size) {
-		dev_err(dev, "E: only %d bytes transmitted\n", actual_len);
-		ret = -EIO;
+			   &actual_len, 200);
+	switch (ret) {
+	case 0:
+		if (actual_len != barker_size) {	/* Too short? drop it */
+			dev_err(dev, "E: %s: short write (%d B vs %zu "
+				"expected)\n",
+				__func__, actual_len, barker_size);
+			ret = -EIO;
+		}
+		break;
+	case -EPIPE:
+		/*
+		 * Stall -- maybe the device is choking with our
+		 * requests. Clear it and give it some time. If they
+		 * happen to often, it might be another symptom, so we
+		 * reset.
+		 *
+		 * No error handling for usb_clear_halt(0; if it
+		 * works, the retry works; if it fails, this switch
+		 * does the error handling for us.
+		 */
+		if (edc_inc(&i2400mu->urb_edc,
+			    10 * EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "E: %s: too many stalls in "
+				"URB; resetting device\n", __func__);
+			usb_queue_reset_device(i2400mu->usb_iface);
+			/* fallthrough */
+		} else {
+			usb_clear_halt(i2400mu->usb_dev, pipe);
+			msleep(10);	/* give the device some time */
+			goto retry;
+		}
+	case -EINVAL:			/* while removing driver */
+	case -ENODEV:			/* dev disconnect ... */
+	case -ENOENT:			/* just ignore it */
+	case -ESHUTDOWN:		/* and exit */
+	case -ECONNRESET:
+		ret = -ESHUTDOWN;
+		break;
+	default:			/* Some error? */
+		if (edc_inc(&i2400mu->urb_edc,
+			    EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) {
+			dev_err(dev, "E: %s: maximum errors in URB "
+				"exceeded; resetting device\n",
+				__func__);
+			usb_queue_reset_device(i2400mu->usb_iface);
+		} else {
+			dev_warn(dev, "W: %s: cannot send URB: %d\n",
+				 __func__, ret);
+			goto retry;
+		}
 	}
 	kfree(buffer);
 error_kzalloc:
@@ -232,15 +289,16 @@
 
 	d_fnstart(3, dev, "(i2400m %p rt %u)\n", i2400m, rt);
 	if (rt == I2400M_RT_WARM)
-		result = __i2400mu_send_barker(i2400mu, i2400m_WARM_BOOT_BARKER,
-					       sizeof(i2400m_WARM_BOOT_BARKER),
-					       I2400MU_EP_BULK_OUT);
+		result = __i2400mu_send_barker(
+			i2400mu, i2400m_WARM_BOOT_BARKER,
+			sizeof(i2400m_WARM_BOOT_BARKER),
+			i2400mu->endpoint_cfg.bulk_out);
 	else if (rt == I2400M_RT_COLD)
-		result = __i2400mu_send_barker(i2400mu, i2400m_COLD_BOOT_BARKER,
-					       sizeof(i2400m_COLD_BOOT_BARKER),
-					       I2400MU_EP_RESET_COLD);
+		result = __i2400mu_send_barker(
+			i2400mu, i2400m_COLD_BOOT_BARKER,
+			sizeof(i2400m_COLD_BOOT_BARKER),
+			i2400mu->endpoint_cfg.reset_cold);
 	else if (rt == I2400M_RT_BUS) {
-do_bus_reset:
 		result = usb_reset_device(i2400mu->usb_dev);
 		switch (result) {
 		case 0:
@@ -248,7 +306,7 @@
 		case -ENODEV:
 		case -ENOENT:
 		case -ESHUTDOWN:
-			result = rt == I2400M_RT_WARM ? -ENODEV : 0;
+			result = 0;
 			break;	/* We assume the device is disconnected */
 		default:
 			dev_err(dev, "USB reset failed (%d), giving up!\n",
@@ -261,10 +319,17 @@
 	if (result < 0
 	    && result != -EINVAL	/* device is gone */
 	    && rt != I2400M_RT_BUS) {
+		/*
+		 * Things failed -- resort to lower level reset, that
+		 * we queue in another context; the reason for this is
+		 * that the pre and post reset functionality requires
+		 * the i2400m->init_mutex; RT_WARM and RT_COLD can
+		 * come from areas where i2400m->init_mutex is taken.
+		 */
 		dev_err(dev, "%s reset failed (%d); trying USB reset\n",
 			rt == I2400M_RT_WARM ? "warm" : "cold", result);
-		rt = I2400M_RT_BUS;
-		goto do_bus_reset;
+		usb_queue_reset_device(i2400mu->usb_iface);
+		result = -ENODEV;
 	}
 	d_fnend(3, dev, "(i2400m %p rt %u) = %d\n", i2400m, rt, result);
 	return result;
@@ -402,20 +467,33 @@
 
 	i2400m->bus_tx_block_size = I2400MU_BLK_SIZE;
 	i2400m->bus_pl_size_max = I2400MU_PL_SIZE_MAX;
+	i2400m->bus_setup = NULL;
 	i2400m->bus_dev_start = i2400mu_bus_dev_start;
 	i2400m->bus_dev_stop = i2400mu_bus_dev_stop;
+	i2400m->bus_release = NULL;
 	i2400m->bus_tx_kick = i2400mu_bus_tx_kick;
 	i2400m->bus_reset = i2400mu_bus_reset;
-	i2400m->bus_bm_retries = I2400M_BOOT_RETRIES;
+	i2400m->bus_bm_retries = I2400M_USB_BOOT_RETRIES;
 	i2400m->bus_bm_cmd_send = i2400mu_bus_bm_cmd_send;
 	i2400m->bus_bm_wait_for_ack = i2400mu_bus_bm_wait_for_ack;
-	i2400m->bus_fw_names = i2400mu_bus_fw_names;
 	i2400m->bus_bm_mac_addr_impaired = 0;
 
+	if (id->idProduct == USB_DEVICE_ID_I6050) {
+		i2400m->bus_fw_names = i2400mu_bus_fw_names_6050;
+		i2400mu->endpoint_cfg.bulk_out = 0;
+		i2400mu->endpoint_cfg.notification = 3;
+		i2400mu->endpoint_cfg.reset_cold = 2;
+		i2400mu->endpoint_cfg.bulk_in = 1;
+	} else {
+		i2400m->bus_fw_names = i2400mu_bus_fw_names_5x50;
+		i2400mu->endpoint_cfg.bulk_out = 0;
+		i2400mu->endpoint_cfg.notification = 1;
+		i2400mu->endpoint_cfg.reset_cold = 2;
+		i2400mu->endpoint_cfg.bulk_in = 3;
+	}
 #ifdef CONFIG_PM
 	iface->needs_remote_wakeup = 1;		/* autosuspend (15s delay) */
 	device_init_wakeup(dev, 1);
-	usb_autopm_enable(i2400mu->usb_iface);
 	usb_dev->autosuspend_delay = 15 * HZ;
 	usb_dev->autosuspend_disabled = 0;
 #endif
@@ -483,7 +561,10 @@
  * So at the end, the three cases require common handling.
  *
  * If at the time of this call the device's firmware is not loaded,
- * nothing has to be done.
+ * nothing has to be done. Note we can be "loose" about not reading
+ * i2400m->updown under i2400m->init_mutex. If it happens to change
+ * inmediately, other parts of the call flow will fail and effectively
+ * catch it.
  *
  * If the firmware is loaded, we need to:
  *
@@ -522,6 +603,7 @@
 #endif
 
 	d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
+	rmb();		/* see i2400m->updown's documentation  */
 	if (i2400m->updown == 0)
 		goto no_firmware;
 	if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
@@ -575,6 +657,7 @@
 	struct i2400m *i2400m = &i2400mu->i2400m;
 
 	d_fnstart(3, dev, "(iface %p)\n", iface);
+	rmb();		/* see i2400m->updown's documentation  */
 	if (i2400m->updown == 0) {
 		d_printf(1, dev, "fw was down, no resume neeed\n");
 		goto out;
@@ -591,7 +674,54 @@
 
 
 static
+int i2400mu_reset_resume(struct usb_interface *iface)
+{
+	int result;
+	struct device *dev = &iface->dev;
+	struct i2400mu *i2400mu = usb_get_intfdata(iface);
+	struct i2400m *i2400m = &i2400mu->i2400m;
+
+	d_fnstart(3, dev, "(iface %p)\n", iface);
+	result = i2400m_dev_reset_handle(i2400m, "device reset on resume");
+	d_fnend(3, dev, "(iface %p) = %d\n", iface, result);
+	return result < 0 ? result : 0;
+}
+
+
+/*
+ * Another driver or user space is triggering a reset on the device
+ * which contains the interface passed as an argument. Cease IO and
+ * save any device state you need to restore.
+ *
+ * If you need to allocate memory here, use GFP_NOIO or GFP_ATOMIC, if
+ * you are in atomic context.
+ */
+static
+int i2400mu_pre_reset(struct usb_interface *iface)
+{
+	struct i2400mu *i2400mu = usb_get_intfdata(iface);
+	return i2400m_pre_reset(&i2400mu->i2400m);
+}
+
+
+/*
+ * The reset has completed.  Restore any saved device state and begin
+ * using the device again.
+ *
+ * If you need to allocate memory here, use GFP_NOIO or GFP_ATOMIC, if
+ * you are in atomic context.
+ */
+static
+int i2400mu_post_reset(struct usb_interface *iface)
+{
+	struct i2400mu *i2400mu = usb_get_intfdata(iface);
+	return i2400m_post_reset(&i2400mu->i2400m);
+}
+
+
+static
 struct usb_device_id i2400mu_id_table[] = {
+	{ USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) },
 	{ USB_DEVICE(0x8086, 0x0181) },
 	{ USB_DEVICE(0x8086, 0x1403) },
 	{ USB_DEVICE(0x8086, 0x1405) },
@@ -609,8 +739,11 @@
 	.name = KBUILD_MODNAME,
 	.suspend = i2400mu_suspend,
 	.resume = i2400mu_resume,
+	.reset_resume = i2400mu_reset_resume,
 	.probe = i2400mu_probe,
 	.disconnect = i2400mu_disconnect,
+	.pre_reset = i2400mu_pre_reset,
+	.post_reset = i2400mu_post_reset,
 	.id_table = i2400mu_id_table,
 	.supports_autosuspend = 1,
 };
@@ -618,6 +751,8 @@
 static
 int __init i2400mu_driver_init(void)
 {
+	d_parse_params(D_LEVEL, D_LEVEL_SIZE, i2400mu_debug_params,
+		       "i2400m_usb.debug");
 	return usb_register(&i2400mu_driver);
 }
 module_init(i2400mu_driver_init);
@@ -632,7 +767,7 @@
 module_exit(i2400mu_driver_exit);
 
 MODULE_AUTHOR("Intel Corporation <linux-wimax@intel.com>");
-MODULE_DESCRIPTION("Intel 2400M WiMAX networking for USB");
+MODULE_DESCRIPTION("Driver for USB based Intel Wireless WiMAX Connection 2400M "
+		   "(5x50 & 6050)");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE(I2400MU_FW_FILE_NAME_v1_4);
-MODULE_FIRMWARE(I2400MU_FW_FILE_NAME_v1_3);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index d7a764a..56dd665 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -5,6 +5,7 @@
 menuconfig WLAN
 	bool "Wireless LAN"
 	depends on !S390
+	select WIRELESS
 	default y
 	---help---
 	  This section contains all the pre 802.11 and 802.11 wireless
@@ -15,114 +16,12 @@
 
 if WLAN
 
-menuconfig WLAN_PRE80211
-	bool "Wireless LAN (pre-802.11)"
-	depends on NETDEVICES
-	---help---
-	  Say Y if you have any pre-802.11 wireless LAN hardware.
-
-	  This option does not affect the kernel build, it only
-	  lets you choose drivers.
-
-config STRIP
-	tristate "STRIP (Metricom starmode radio IP)"
-	depends on INET && WLAN_PRE80211
-	select WIRELESS_EXT
-	---help---
-	  Say Y if you have a Metricom radio and intend to use Starmode Radio
-	  IP. STRIP is a radio protocol developed for the MosquitoNet project
-	  to send Internet traffic using Metricom radios.  Metricom radios are
-	  small, battery powered, 100kbit/sec packet radio transceivers, about
-	  the size and weight of a cellular telephone. (You may also have heard
-	  them called "Metricom modems" but we avoid the term "modem" because
-	  it misleads many people into thinking that you can plug a Metricom
-	  modem into a phone line and use it as a modem.)
-
-	  You can use STRIP on any Linux machine with a serial port, although
-	  it is obviously most useful for people with laptop computers. If you
-	  think you might get a Metricom radio in the future, there is no harm
-	  in saying Y to STRIP now, except that it makes the kernel a bit
-	  bigger.
-
-	  To compile this as a module, choose M here: the module will be
-	  called strip.
-
-config ARLAN
-	tristate "Aironet Arlan 655 & IC2200 DS support"
-	depends on ISA && !64BIT && WLAN_PRE80211
-	select WIRELESS_EXT
-	---help---
-	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
-	  www.Telxon.com chip, which is also used on several similar cards.
-	  This driver is tested on the 655 and IC2200 series cards. Look at
-	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.
-
-	  The driver is built as two modules, arlan and arlan-proc. The latter
-	  is the /proc interface and is not needed most of time.
-
-	  On some computers the card ends up in non-valid state after some
-	  time. Use a ping-reset script to clear it.
-
-config WAVELAN
-	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
-	depends on ISA && WLAN_PRE80211
-	select WIRELESS_EXT
-	---help---
-	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
-	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
-	  radio frequencies 900 MHz and 2.4 GHz.
-
-	  If you want to use an ISA WaveLAN card under Linux, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some more specific
-	  information is contained in
-	  <file:Documentation/networking/wavelan.txt> and in the source code
-	  <file:drivers/net/wireless/wavelan.p.h>.
-
-	  You will also need the wireless tools package available from
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-	  Please read the man pages contained therein.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called wavelan.
-
-config PCMCIA_WAVELAN
-	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
-	depends on PCMCIA && WLAN_PRE80211
-	select WIRELESS_EXT
-	help
-	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
-	  (PC-card) wireless Ethernet networking card to your computer.  This
-	  driver is for the non-IEEE-802.11 Wavelan cards.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called wavelan_cs.  If unsure, say N.
-
-config PCMCIA_NETWAVE
-	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
-	depends on PCMCIA && WLAN_PRE80211
-	select WIRELESS_EXT
-	help
-	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
-	  wireless Ethernet networking card to your computer.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called netwave_cs.  If unsure, say N.
-
-
-menuconfig WLAN_80211
-	bool "Wireless LAN (IEEE 802.11)"
-	depends on NETDEVICES
-	---help---
-	  Say Y if you have any 802.11 wireless LAN hardware.
-
-	  This option does not affect the kernel build, it only
-	  lets you choose drivers.
-
 config PCMCIA_RAYCS
 	tristate "Aviator/Raytheon 2.4GHz wireless support"
-	depends on PCMCIA && WLAN_80211
+	depends on PCMCIA
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
 	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 	  (PC-card) wireless Ethernet networking card to your computer.
@@ -132,49 +31,9 @@
 	  To compile this driver as a module, choose M here: the module will be
 	  called ray_cs.  If unsure, say N.
 
-config LIBERTAS
-	tristate "Marvell 8xxx Libertas WLAN driver support"
-	depends on WLAN_80211
-	select WIRELESS_EXT
-	select LIB80211
-	select FW_LOADER
-	---help---
-	  A library for Marvell Libertas 8xxx devices.
-
-config LIBERTAS_USB
-	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
-	depends on LIBERTAS && USB
-	---help---
-	  A driver for Marvell Libertas 8388 USB devices.
-
-config LIBERTAS_CS
-	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
-	depends on LIBERTAS && PCMCIA
-	select FW_LOADER
-	---help---
-	  A driver for Marvell Libertas 8385 CompactFlash devices.
-
-config LIBERTAS_SDIO
-	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
-	depends on LIBERTAS && MMC
-	---help---
-	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
-
-config LIBERTAS_SPI
-	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
-	depends on LIBERTAS && SPI
-	---help---
-	  A driver for Marvell Libertas 8686 SPI devices.
-
-config LIBERTAS_DEBUG
-	bool "Enable full debugging output in the Libertas module."
-	depends on LIBERTAS
-	---help---
-	  Debugging support.
-
 config LIBERTAS_THINFIRM
 	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
-	depends on WLAN_80211 && MAC80211
+	depends on MAC80211
 	select FW_LOADER
 	---help---
 	  A library for Marvell Libertas 8xxx devices using thinfirm.
@@ -187,9 +46,11 @@
 
 config AIRO
 	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
+	depends on ISA_DMA_API && (PCI || BROKEN)
 	select WIRELESS_EXT
 	select CRYPTO
+	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet ISA and
 	  PCI 802.11 wireless cards.
@@ -205,8 +66,9 @@
 
 config ATMEL
       tristate "Atmel at76c50x chipset  802.11b support"
-      depends on (PCI || PCMCIA) && WLAN_80211
+      depends on (PCI || PCMCIA)
       select WIRELESS_EXT
+      select WEXT_PRIV
       select FW_LOADER
       select CRC32
        ---help---
@@ -239,7 +101,7 @@
 
 config AT76C50X_USB
         tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-        depends on MAC80211 && WLAN_80211 && USB
+        depends on MAC80211 && USB
         select FW_LOADER
         ---help---
           Enable support for USB Wireless devices using Atmel at76c503,
@@ -247,8 +109,9 @@
 
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
+	depends on PCMCIA && (BROKEN || !M32R)
 	select WIRELESS_EXT
+	select WEXT_SPY
 	select CRYPTO
 	select CRYPTO_AES
 	---help---
@@ -266,18 +129,21 @@
 	  Cisco Linux utilities can be used to configure the card.
 
 config PCMCIA_WL3501
-      tristate "Planet WL3501 PCMCIA cards"
-      depends on EXPERIMENTAL && PCMCIA && WLAN_80211
-      select WIRELESS_EXT
-       ---help---
-         A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
-	 It has basic support for Linux wireless extensions and initial
-	 micro support for ethtool.
+	tristate "Planet WL3501 PCMCIA cards"
+	depends on EXPERIMENTAL && PCMCIA
+	select WIRELESS_EXT
+	select WEXT_SPY
+	help
+	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+	  It has basic support for Linux wireless extensions and initial
+	  micro support for ethtool.
 
 config PRISM54
 	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
-	depends on PCI && EXPERIMENTAL && WLAN_80211
+	depends on PCI && EXPERIMENTAL
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	---help---
 	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
@@ -298,8 +164,9 @@
 
 config USB_ZD1201
 	tristate "USB ZD1201 based Wireless device support"
-	depends on USB && WLAN_80211
+	depends on USB
 	select WIRELESS_EXT
+	select WEXT_PRIV
 	select FW_LOADER
 	---help---
 	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
@@ -316,7 +183,7 @@
 
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
-	depends on USB && WLAN_80211 && EXPERIMENTAL
+	depends on USB && EXPERIMENTAL
 	depends on CFG80211
 	select USB_USBNET
 	select USB_NET_CDCETHER
@@ -344,7 +211,7 @@
 
 config RTL8180
 	tristate "Realtek 8180/8185 PCI support"
-	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && PCI && EXPERIMENTAL
 	select EEPROM_93CX6
 	---help---
 	  This is a driver for RTL8180 and RTL8185 based cards.
@@ -400,7 +267,7 @@
 
 config RTL8187
 	tristate "Realtek 8187 and 8187B USB support"
-	depends on MAC80211 && USB && WLAN_80211
+	depends on MAC80211 && USB
 	select EEPROM_93CX6
 	---help---
 	  This is a driver for RTL8187 and RTL8187B based cards.
@@ -429,7 +296,7 @@
 
 config ADM8211
 	tristate "ADMtek ADM8211 support"
-	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && PCI && EXPERIMENTAL
 	select CRC32
 	select EEPROM_93CX6
 	---help---
@@ -456,7 +323,7 @@
 
 config MAC80211_HWSIM
 	tristate "Simulated radio testing tool for mac80211"
-	depends on MAC80211 && WLAN_80211
+	depends on MAC80211
 	---help---
 	  This driver is a developer testing tool that can be used to test
 	  IEEE 802.11 networking stack (mac80211) functionality. This is not
@@ -469,24 +336,25 @@
 
 config MWL8K
 	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
-	depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && PCI && EXPERIMENTAL
 	---help---
 	  This driver supports Marvell TOPDOG 802.11 wireless cards.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mwl8k.  If unsure, say N.
 
-source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/ath/Kconfig"
-source "drivers/net/wireless/ipw2x00/Kconfig"
-source "drivers/net/wireless/iwlwifi/Kconfig"
-source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/b43/Kconfig"
 source "drivers/net/wireless/b43legacy/Kconfig"
-source "drivers/net/wireless/zd1211rw/Kconfig"
-source "drivers/net/wireless/rt2x00/Kconfig"
-source "drivers/net/wireless/orinoco/Kconfig"
-source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/hostap/Kconfig"
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/iwmc3200wifi/Kconfig"
+source "drivers/net/wireless/libertas/Kconfig"
+source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/p54/Kconfig"
+source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/zd1211rw/Kconfig"
 
 endif # WLAN
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 7a4647e..5d4ce4d 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -5,16 +5,6 @@
 obj-$(CONFIG_IPW2100) += ipw2x00/
 obj-$(CONFIG_IPW2200) += ipw2x00/
 
-obj-$(CONFIG_STRIP) += strip.o
-obj-$(CONFIG_ARLAN) += arlan.o 
-
-arlan-objs := arlan-main.o arlan-proc.o
-
-# Obsolete cards
-obj-$(CONFIG_WAVELAN)		+= wavelan.o
-obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave_cs.o
-obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan_cs.o
-
 obj-$(CONFIG_HERMES)		+= orinoco/
 
 obj-$(CONFIG_AIRO)		+= airo.o
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index b80f514..3941001 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1538,7 +1538,7 @@
 	adm8211_hw_init(dev);
 	adm8211_rf_set_channel(dev, priv->channel);
 
-	retval = request_irq(priv->pdev->irq, &adm8211_interrupt,
+	retval = request_irq(priv->pdev->irq, adm8211_interrupt,
 			     IRQF_SHARED, "adm8211", dev);
 	if (retval) {
 		printk(KERN_ERR "%s: failed to register IRQ handler\n",
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index abf896a..4331d67 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -4806,7 +4806,7 @@
 
 static inline int sniffing_mode(struct airo_info *ai)
 {
-	return le16_to_cpu(ai->config.rmode & RXMODE_MASK) >=
+	return (le16_to_cpu(ai->config.rmode) & le16_to_cpu(RXMODE_MASK)) >=
 		le16_to_cpu(RXMODE_RFMON);
 }
 
@@ -5659,7 +5659,8 @@
 
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
 	pci_save_state(pdev);
-	return pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
 }
 
 static int airo_pci_resume(struct pci_dev *pdev)
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d0593ed..f6036fb 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -43,21 +43,6 @@
 
 #include "airo.h"
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -145,11 +130,10 @@
 {
 	local_info_t *local;
 
-	DEBUG(0, "airo_attach()\n");
+	dev_dbg(&p_dev->dev, "airo_attach()\n");
 
 	/* Interrupt setup */
 	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	p_dev->irq.Handler = NULL;
 
 	/*
@@ -184,7 +168,7 @@
 
 static void airo_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "airo_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "airo_detach\n");
 
 	airo_release(link);
 
@@ -204,9 +188,6 @@
 
   ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
@@ -275,11 +256,11 @@
 		req->Base = mem->win[0].host_addr;
 		req->Size = mem->win[0].len;
 		req->AccessSpeed = 0;
-		if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+		if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
 			return -ENODEV;
 		map.Page = 0;
 		map.CardOffset = mem->win[0].card_addr;
-		if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
 			return -ENODEV;
 	}
 	/* If we got this far, we're cool! */
@@ -291,11 +272,11 @@
 {
 	local_info_t *dev;
 	win_req_t *req;
-	int last_fn, last_ret;
+	int ret;
 
 	dev = link->priv;
 
-	DEBUG(0, "airo_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "airo_config\n");
 
 	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
 	if (!req)
@@ -315,8 +296,8 @@
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
-	if (last_ret)
+	ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+	if (ret)
 		goto failed;
 
 	/*
@@ -324,21 +305,25 @@
 	  handler to the interrupt, unless the 'Handler' member of the
 	  irq structure is initialized.
 	*/
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
+	}
 
 	/*
 	  This actually configures the PCMCIA socket -- setting up
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
-	CS_CHECK(RequestConfiguration,
-		 pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
 		init_airo_card(link->irq.AssignedIRQ,
-			       link->io.BasePort1, 1, &handle_to_dev(link));
+			       link->io.BasePort1, 1, &link->dev);
 	if (!((local_info_t *)link->priv)->eth_dev)
-		goto cs_failed;
+		goto failed;
 
 	/*
 	  At this point, the dev_node_t structure(s) need to be
@@ -368,8 +353,6 @@
 	kfree(req);
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
  failed:
 	airo_release(link);
 	kfree(req);
@@ -386,7 +369,7 @@
 
 static void airo_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "airo_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "airo_release\n");
 	pcmcia_disable_device(link);
 }
 
diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/net/wireless/arlan-proc.c
deleted file mode 100644
index a8b6896..0000000
--- a/drivers/net/wireless/arlan-proc.c
+++ /dev/null
@@ -1,1253 +0,0 @@
-#include "arlan.h"
-
-#include <linux/sysctl.h>
-
-#ifdef CONFIG_PROC_FS
-
-/* void enableReceive(struct net_device* dev);
-*/
-
-
-
-#define ARLAN_STR_SIZE 	0x2ff0
-#define DEV_ARLAN_INFO 	1
-#define DEV_ARLAN 	1
-#define SARLG(type,var) {\
-	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n", #var, READSHMB(priva->card->var));	\
-	}
-
-#define SARLBN(type,var,nn) {\
-	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x",#var);\
-	for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\
-	pos += sprintf(arlan_drive_info+pos, "\n");	\
-	}
-
-#define SARLBNpln(type,var,nn) {\
-	for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\
-	}
-
-#define SARLSTR(var,nn) {\
-	char tmpStr[400];\
-	int  tmpLn = nn;\
-	if (nn > 399 ) tmpLn = 399; \
-	memcpy(tmpStr,(char *) priva->conf->var,tmpLn);\
-	tmpStr[tmpLn] = 0; \
-	pos += sprintf(arlan_drive_info+pos, "%s\t=\t%s \n",#var,priva->conf->var);\
-	}
-
-#define SARLUC(var)  	SARLG(u_char, var)
-#define SARLUCN(var,nn) SARLBN(u_char,var, nn)
-#define SARLUS(var)	SARLG(u_short, var)
-#define SARLUSN(var,nn)	SARLBN(u_short,var, nn)
-#define SARLUI(var)	SARLG(u_int, var)
-
-#define SARLUSA(var) {\
-	u_short tmpVar;\
-	memcpy(&tmpVar, (short *) priva->conf->var,2); \
-	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\
-}
-
-#define SARLUIA(var) {\
-	u_int tmpVar;\
-	memcpy(&tmpVar, (int* )priva->conf->var,4); \
-	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\
-}
-
-
-static const char *arlan_diagnostic_info_string(struct net_device *dev)
-{
-
-	struct arlan_private *priv = netdev_priv(dev);
-	volatile struct arlan_shmem __iomem *arlan = priv->card;
-	u_char diagnosticInfo;
-
-	READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char);
-
-	switch (diagnosticInfo)
-	{
-		case 0xFF:
-			return "Diagnostic info is OK";
-		case 0xFE:
-			return "ERROR EPROM Checksum error ";
-		case 0xFD:
-			return "ERROR Local Ram Test Failed ";
-		case 0xFC:
-			return "ERROR SCC failure ";
-		case 0xFB:
-			return "ERROR BackBone failure ";
-		case 0xFA:
-			return "ERROR transceiver not found ";
-		case 0xF9:
-			return "ERROR no more address space ";
-		case 0xF8:
-			return "ERROR Checksum error  ";
-		case 0xF7:
-			return "ERROR Missing SS Code";
-		case 0xF6:
-			return "ERROR Invalid config format";
-		case 0xF5:
-			return "ERROR Reserved errorcode F5";
-		case 0xF4:
-			return "ERROR Invalid spreading code/channel number";
-		case 0xF3:
-			return "ERROR Load Code Error";
-		case 0xF2:
-			return "ERROR Reserver errorcode F2 ";
-		case 0xF1:
-			return "ERROR Invalid command receivec by LAN card ";
-		case 0xF0:
-			return "ERROR Invalid parameter found in command ";
-		case 0xEF:
-			return "ERROR On-chip timer failure ";
-		case 0xEE:
-			return "ERROR T410 timer failure ";
-		case 0xED:
-			return "ERROR Too Many TxEnable commands ";
-		case 0xEC:
-			return "ERROR EEPROM error on radio module ";
-		default:
-			return "ERROR unknown Diagnostic info reply code ";
-	  }
-}
-
-static const char *arlan_hardware_type_string(struct net_device *dev)
-{
-	u_char hardwareType;
-	struct arlan_private *priv = netdev_priv(dev);
-	volatile struct arlan_shmem __iomem *arlan = priv->card;
-
-	READSHM(hardwareType, arlan->hardwareType, u_char);
-	switch (hardwareType)
-	{
-		case 0x00:
-			return "type A450";
-		case 0x01:
-			return "type A650 ";
-		case 0x04:
-			return "type TMA coproc";
-		case 0x0D:
-			return "type A650E ";
-		case 0x18:
-			return "type TMA coproc Australian";
-		case 0x19:
-			return "type A650A ";
-		case 0x26:
-			return "type TMA coproc European";
-		case 0x2E:
-			return "type A655 ";
-		case 0x2F:
-			return "type A655A ";
-		case 0x30:
-			return "type A655E ";
-		case 0x0B:
-			return "type A670 ";
-		case 0x0C:
-			return "type A670E ";
-		case 0x2D:
-			return "type A670A ";
-		case 0x0F:
-			return "type A411T";
-		case 0x16:
-			return "type A411TA";
-		case 0x1B:
-			return "type A440T";
-		case 0x1C:
-			return "type A412T";
-		case 0x1E:
-			return "type A412TA";
-		case 0x22:
-			return "type A411TE";
-		case 0x24:
-			return "type A412TE";
-		case 0x27:
-			return "type A671T ";
-		case 0x29:
-			return "type A671TA ";
-		case 0x2B:
-			return "type A671TE ";
-		case 0x31:
-			return "type A415T ";
-		case 0x33:
-			return "type A415TA ";
-		case 0x35:
-			return "type A415TE ";
-		case 0x37:
-			return "type A672";
-		case 0x39:
-			return "type A672A ";
-		case 0x3B:
-			return "type A672T";
-		case 0x6B:
-			return "type IC2200";
-		default:
-			return "type A672T";
-	}
-}
-#ifdef ARLAN_DEBUGGING
-static void arlan_print_diagnostic_info(struct net_device *dev)
-{
-	int i;
-	u_char diagnosticInfo;
-	u_short diagnosticOffset;
-	u_char hardwareType;
-	struct arlan_private *priv = netdev_priv(dev);
-	volatile struct arlan_shmem __iomem *arlan = priv->card;
-
-	//  ARLAN_DEBUG_ENTRY("arlan_print_diagnostic_info");
-
-	if (READSHMB(arlan->configuredStatusFlag) == 0)
-		printk("Arlan: Card NOT configured\n");
-	else
-		printk("Arlan: Card is configured\n");
-
-	READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char);
-	READSHM(diagnosticOffset, arlan->diagnosticOffset, u_short);
-
-	printk(KERN_INFO "%s\n", arlan_diagnostic_info_string(dev));
-
-	if (diagnosticInfo != 0xff)
-		printk("%s arlan: Diagnostic Offset %d \n", dev->name, diagnosticOffset);
-
-	printk("arlan: LAN CODE ID = ");
-	for (i = 0; i < 6; i++)
-		DEBUGSHM(1, "%03d:", arlan->lanCardNodeId[i], u_char);
-	printk("\n");
-
-	printk("arlan: Arlan BroadCast address  = ");
-	for (i = 0; i < 6; i++)
-		DEBUGSHM(1, "%03d:", arlan->broadcastAddress[i], u_char);
-	printk("\n");
-
-	READSHM(hardwareType, arlan->hardwareType, u_char);
-	printk(KERN_INFO "%s\n", arlan_hardware_type_string(dev));
-
-
-	DEBUGSHM(1, "arlan: channelNumber=%d\n", arlan->channelNumber, u_char);
-	DEBUGSHM(1, "arlan: channelSet=%d\n", arlan->channelSet, u_char);
-	DEBUGSHM(1, "arlan: spreadingCode=%d\n", arlan->spreadingCode, u_char);
-	DEBUGSHM(1, "arlan: radioNodeId=%d\n", arlan->radioNodeId, u_short);
-	DEBUGSHM(1, "arlan: SID	=%d\n", arlan->SID, u_short);
-	DEBUGSHM(1, "arlan: rxOffset=%d\n", arlan->rxOffset, u_short);
-
-	DEBUGSHM(1, "arlan: registration mode is %d\n", arlan->registrationMode, u_char);
-
-	printk("arlan: name= ");
-	IFDEBUG(1)
-	
-	for (i = 0; i < 16; i++)
-	{
-		char c;
-		READSHM(c, arlan->name[i], char);
-		if (c)
-			printk("%c", c);
-	}
-	printk("\n");
-
-//   ARLAN_DEBUG_EXIT("arlan_print_diagnostic_info");
-
-}
-
-
-/******************************		TEST 	MEMORY	**************/
-
-static int arlan_hw_test_memory(struct net_device *dev)
-{
-	u_char *ptr;
-	int i;
-	int memlen = sizeof(struct arlan_shmem) - 0xF;	/* avoid control register */
-	volatile char *arlan_mem = (char *) (dev->mem_start);
-	struct arlan_private *priv = netdev_priv(dev);
-	volatile struct arlan_shmem __iomem *arlan = priv->card;
-	char pattern;
-
-	ptr = NULL;
-
-	/* hold card in reset state */
-	setHardwareReset(dev);
-
-	/* test memory */
-	pattern = 0;
-	for (i = 0; i < memlen; i++)
-		WRITESHM(arlan_mem[i], ((u_char) pattern++), u_char);
-
-	pattern = 0;
-	for (i = 0; i < memlen; i++)
-	{
-		char res;
-		READSHM(res, arlan_mem[i], char);
-		if (res != pattern++)
-		{
-			printk(KERN_ERR "Arlan driver memory test 1 failed \n");
-			return -1;
-		}
-	}
-
-	pattern = 0;
-	for (i = 0; i < memlen; i++)
-		WRITESHM(arlan_mem[i], ~(pattern++), char);
-
-	pattern = 0;
-	for (i = 0; i < memlen; i++)
-	{
-		char res;
-		READSHM(res, arlan_mem[i], char);
-		if (res != ~(pattern++))
-		{
-			printk(KERN_ERR "Arlan driver memory test 2 failed \n");
-			return -1;
-		}
-	}
-
-	/* zero memory */
-	for (i = 0; i < memlen; i++)
-		WRITESHM(arlan_mem[i], 0x00, char);
-
-	IFDEBUG(1) printk(KERN_INFO "Arlan: memory tests ok\n");
-
-	/* set reset flag and then release reset */
-	WRITESHM(arlan->resetFlag, 0xff, u_char);
-
-	clearChannelAttention(dev);
-	clearHardwareReset(dev);
-
-	/* wait for reset flag to become zero, we'll wait for two seconds */
-	if (arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW))
-	{
-		printk(KERN_ERR "%s arlan: failed to come back from memory test\n", dev->name);
-		return -1;
-	}
-	return 0;
-}
-
-static int arlan_setup_card_by_book(struct net_device *dev)
-{
-	u_char irqLevel, configuredStatusFlag;
-	struct arlan_private *priv = netdev_priv(dev);
-	volatile struct arlan_shmem __iomem *arlan = priv->card;
-
-//	ARLAN_DEBUG_ENTRY("arlan_setup_card");
-
-	READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char);
-
-	IFDEBUG(10)
-	if (configuredStatusFlag != 0)
-		IFDEBUG(10) printk("arlan: CARD IS CONFIGURED\n");
-	else
-		IFDEBUG(10) printk("arlan: card is NOT configured\n");
-
-	if (testMemory || (READSHMB(arlan->diagnosticInfo) != 0xff))
-		if (arlan_hw_test_memory(dev))
-			return -1;
-
-	DEBUGSHM(4, "arlan configuredStatus = %d \n", arlan->configuredStatusFlag, u_char);
-	DEBUGSHM(4, "arlan driver diagnostic: 0x%2x\n", arlan->diagnosticInfo, u_char);
-
-	/* issue nop command - no interrupt */
-	arlan_command(dev, ARLAN_COMMAND_NOOP);
-	if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0)
-		return -1;
-
-	IFDEBUG(50) printk("1st Noop successfully executed !!\n");
-
-	/* try to turn on the arlan interrupts */
-	clearClearInterrupt(dev);
-	setClearInterrupt(dev);
-	setInterruptEnable(dev);
-
-	/* issue nop command - with interrupt */
-
-	arlan_command(dev, ARLAN_COMMAND_NOOPINT);
-	if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0)
-		return -1;
-
-
-	IFDEBUG(50) printk("2nd Noop successfully executed !!\n");
-
-	READSHM(irqLevel, arlan->irqLevel, u_char)
-	
-	if (irqLevel != dev->irq)
-	{
-		IFDEBUG(1) printk(KERN_WARNING "arlan dip switches set irq to %d\n", irqLevel);
-		printk(KERN_WARNING "device driver irq set to %d - does not match\n", dev->irq);
-		dev->irq = irqLevel;
-	}
-	else
-		IFDEBUG(2) printk("irq level is OK\n");
-
-
-	IFDEBUG(3) arlan_print_diagnostic_info(dev);
-
-	arlan_command(dev, ARLAN_COMMAND_CONF);
-
-	READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char);
-	if (configuredStatusFlag == 0)
-	{
-		printk(KERN_WARNING "arlan configure failed\n");
-		return -1;
-	}
-	arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW);
-	arlan_command(dev, ARLAN_COMMAND_RX);
-	arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW);
-	printk(KERN_NOTICE "%s: arlan driver version %s loaded\n",
-	       dev->name, arlan_version);
-
-//	ARLAN_DEBUG_EXIT("arlan_setup_card");
-
-	return 0;		/* no errors */
-}
-#endif
-
-#ifdef ARLAN_PROC_INTERFACE
-#ifdef ARLAN_PROC_SHM_DUMP
-
-static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0";
-
-static int arlan_sysctl_info(ctl_table * ctl, int write,
-		      void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int i;
-	int retv, pos, devnum;
-	struct arlan_private *priva = NULL;
-	struct net_device *dev;
-	pos = 0;
-	if (write)
-	{
-		printk("wrirte: ");
-		for (i = 0; i < 100; i++)
-			printk("adi %x \n", arlan_drive_info[i]);
-	}
-	if (ctl->procname == NULL || arlan_drive_info == NULL)
-	{
-		printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL \n at arlan module\n ");
-		return -1;
-	}
-	devnum = ctl->procname[5] - '0';
-	if (devnum < 0 || devnum > MAX_ARLANS - 1)
-	{
-		printk(KERN_WARNING "too strange devnum in procfs parse\n ");
-		return -1;
-	}
-	else if (arlan_device[devnum] == NULL)
-	{
-		if (ctl->procname)
-			pos += sprintf(arlan_drive_info + pos, "\t%s\n\n", ctl->procname);
-		pos += sprintf(arlan_drive_info + pos, "No device found here \n");
-		goto final;
-	}
-	else
-		priva = netdev_priv(arlan_device[devnum]);
-
-	if (priva == NULL)
-	{
-		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
-		return -1;
-	}
-	dev = arlan_device[devnum];
-
-	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
-
-	pos = sprintf(arlan_drive_info, "Arlan  info \n");
-	/* Header Signature */
-	SARLSTR(textRegion, 48);
-	SARLUC(resetFlag);
-	pos += sprintf(arlan_drive_info + pos, "diagnosticInfo\t=\t%s \n", arlan_diagnostic_info_string(dev));
-	SARLUC(diagnosticInfo);
-	SARLUS(diagnosticOffset);
-	SARLUCN(_1, 12);
-	SARLUCN(lanCardNodeId, 6);
-	SARLUCN(broadcastAddress, 6);
-	pos += sprintf(arlan_drive_info + pos, "hardwareType =\t  %s \n", arlan_hardware_type_string(dev));
-	SARLUC(hardwareType);
-	SARLUC(majorHardwareVersion);
-	SARLUC(minorHardwareVersion);
-	SARLUC(radioModule);
-	SARLUC(defaultChannelSet);
-	SARLUCN(_2, 47);
-
-	/* Control/Status Block - 0x0080 */
-	SARLUC(interruptInProgress);
-	SARLUC(cntrlRegImage);
-
-	SARLUCN(_3, 14);
-	SARLUC(commandByte);
-	SARLUCN(commandParameter, 15);
-
-	/* Receive Status - 0x00a0 */
-	SARLUC(rxStatus);
-	SARLUC(rxFrmType);
-	SARLUS(rxOffset);
-	SARLUS(rxLength);
-	SARLUCN(rxSrc, 6);
-	SARLUC(rxBroadcastFlag);
-	SARLUC(rxQuality);
-	SARLUC(scrambled);
-	SARLUCN(_4, 1);
-
-	/* Transmit Status - 0x00b0 */
-	SARLUC(txStatus);
-	SARLUC(txAckQuality);
-	SARLUC(numRetries);
-	SARLUCN(_5, 14);
-	SARLUCN(registeredRouter, 6);
-	SARLUCN(backboneRouter, 6);
-	SARLUC(registrationStatus);
-	SARLUC(configuredStatusFlag);
-	SARLUCN(_6, 1);
-	SARLUCN(ultimateDestAddress, 6);
-	SARLUCN(immedDestAddress, 6);
-	SARLUCN(immedSrcAddress, 6);
-	SARLUS(rxSequenceNumber);
-	SARLUC(assignedLocaltalkAddress);
-	SARLUCN(_7, 27);
-
-	/* System Parameter Block */
-
-	/* - Driver Parameters (Novell Specific) */
-
-	SARLUS(txTimeout);
-	SARLUS(transportTime);
-	SARLUCN(_8, 4);
-
-	/* - Configuration Parameters */
-	SARLUC(irqLevel);
-	SARLUC(spreadingCode);
-	SARLUC(channelSet);
-	SARLUC(channelNumber);
-	SARLUS(radioNodeId);
-	SARLUCN(_9, 2);
-	SARLUC(scramblingDisable);
-	SARLUC(radioType);
-	SARLUS(routerId);
-	SARLUCN(_10, 9);
-	SARLUC(txAttenuation);
-	SARLUIA(systemId);
-	SARLUS(globalChecksum);
-	SARLUCN(_11, 4);
-	SARLUS(maxDatagramSize);
-	SARLUS(maxFrameSize);
-	SARLUC(maxRetries);
-	SARLUC(receiveMode);
-	SARLUC(priority);
-	SARLUC(rootOrRepeater);
-	SARLUCN(specifiedRouter, 6);
-	SARLUS(fastPollPeriod);
-	SARLUC(pollDecay);
-	SARLUSA(fastPollDelay);
-	SARLUC(arlThreshold);
-	SARLUC(arlDecay);
-	SARLUCN(_12, 1);
-	SARLUS(specRouterTimeout);
-	SARLUCN(_13, 5);
-
-	/* Scrambled Area */
-	SARLUIA(SID);
-	SARLUCN(encryptionKey, 12);
-	SARLUIA(_14);
-	SARLUSA(waitTime);
-	SARLUSA(lParameter);
-	SARLUCN(_15, 3);
-	SARLUS(headerSize);
-	SARLUS(sectionChecksum);
-
-	SARLUC(registrationMode);
-	SARLUC(registrationFill);
-	SARLUS(pollPeriod);
-	SARLUS(refreshPeriod);
-	SARLSTR(name, 16);
-	SARLUCN(NID, 6);
-	SARLUC(localTalkAddress);
-	SARLUC(codeFormat);
-	SARLUC(numChannels);
-	SARLUC(channel1);
-	SARLUC(channel2);
-	SARLUC(channel3);
-	SARLUC(channel4);
-	SARLUCN(SSCode, 59);
-
-/*      SARLUCN( _16, 0x140);
- */
-	/* Statistics Block - 0x0300 */
-	SARLUC(hostcpuLock);
-	SARLUC(lancpuLock);
-	SARLUCN(resetTime, 18);
-	SARLUIA(numDatagramsTransmitted);
-	SARLUIA(numReTransmissions);
-	SARLUIA(numFramesDiscarded);
-	SARLUIA(numDatagramsReceived);
-	SARLUIA(numDuplicateReceivedFrames);
-	SARLUIA(numDatagramsDiscarded);
-	SARLUS(maxNumReTransmitDatagram);
-	SARLUS(maxNumReTransmitFrames);
-	SARLUS(maxNumConsecutiveDuplicateFrames);
-	/* misaligned here so we have to go to characters */
-	SARLUIA(numBytesTransmitted);
-	SARLUIA(numBytesReceived);
-	SARLUIA(numCRCErrors);
-	SARLUIA(numLengthErrors);
-	SARLUIA(numAbortErrors);
-	SARLUIA(numTXUnderruns);
-	SARLUIA(numRXOverruns);
-	SARLUIA(numHoldOffs);
-	SARLUIA(numFramesTransmitted);
-	SARLUIA(numFramesReceived);
-	SARLUIA(numReceiveFramesLost);
-	SARLUIA(numRXBufferOverflows);
-	SARLUIA(numFramesDiscardedAddrMismatch);
-	SARLUIA(numFramesDiscardedSIDMismatch);
-	SARLUIA(numPollsTransmistted);
-	SARLUIA(numPollAcknowledges);
-	SARLUIA(numStatusTimeouts);
-	SARLUIA(numNACKReceived);
-	SARLUS(auxCmd);
-	SARLUCN(dumpPtr, 4);
-	SARLUC(dumpVal);
-	SARLUC(wireTest);
-	
-	/* next 4 seems too long for procfs, over single page ?
-	SARLUCN( _17, 0x86);
-	SARLUCN( txBuffer, 0x800);
-	SARLUCN( rxBuffer,  0x800); 
-	SARLUCN( _18, 0x0bff);
-	 */
-
-	pos += sprintf(arlan_drive_info + pos, "rxRing\t=\t0x");
-	for (i = 0; i < 0x50; i++)
-		pos += sprintf(arlan_drive_info + pos, "%02x", ((char *) priva->conf)[priva->conf->rxOffset + i]);
-	pos += sprintf(arlan_drive_info + pos, "\n");
-
-	SARLUC(configStatus);
-	SARLUC(_22);
-	SARLUC(progIOCtrl);
-	SARLUC(shareMBase);
-	SARLUC(controlRegister);
-
-	pos += sprintf(arlan_drive_info + pos, " total %d chars\n", pos);
-	if (ctl)
-		if (ctl->procname)
-			pos += sprintf(arlan_drive_info + pos, " driver name : %s\n", ctl->procname);
-final:
-	*lenp = pos;
-
-	if (!write)
-		retv = proc_dostring(ctl, write, buffer, lenp, ppos);
-	else
-	{
-		*lenp = 0;
-		return -1;
-	}
-	return retv;
-}
-
-
-static int arlan_sysctl_info161719(ctl_table * ctl, int write,
-			    void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int i;
-	int retv, pos, devnum;
-	struct arlan_private *priva = NULL;
-
-	pos = 0;
-	devnum = ctl->procname[5] - '0';
-	if (arlan_device[devnum] == NULL)
-	{
-		pos += sprintf(arlan_drive_info + pos, "No device found here \n");
-		goto final;
-	}
-	else
-		priva = netdev_priv(arlan_device[devnum]);
-	if (priva == NULL)
-	{
-		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
-		return -1;
-	}
-	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
-	SARLUCN(_16, 0xC0);
-	SARLUCN(_17, 0x6A);
-	SARLUCN(_18, 14);
-	SARLUCN(_19, 0x86);
-	SARLUCN(_21, 0x3fd);
-
-final:
-	*lenp = pos;
-	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
-	return retv;
-}
-
-static int arlan_sysctl_infotxRing(ctl_table * ctl, int write,
-			    void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int i;
-	int retv, pos, devnum;
-	struct arlan_private *priva = NULL;
-
-	pos = 0;
-	devnum = ctl->procname[5] - '0';
-	if (arlan_device[devnum] == NULL)
-	{
-		  pos += sprintf(arlan_drive_info + pos, "No device found here \n");
-		  goto final;
-	}
-	else
-		priva = netdev_priv(arlan_device[devnum]);
-	if (priva == NULL)
-	{
-		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
-		return -1;
-	}
-	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
-	SARLBNpln(u_char, txBuffer, 0x800);
-final:
-	*lenp = pos;
-	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
-	return retv;
-}
-
-static int arlan_sysctl_inforxRing(ctl_table * ctl, int write,
-			    void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int i;
-	int retv, pos, devnum;
-	struct arlan_private *priva = NULL;
-
-	pos = 0;
-	devnum = ctl->procname[5] - '0';
-	if (arlan_device[devnum] == NULL)
-	{
-		  pos += sprintf(arlan_drive_info + pos, "No device found here \n");
-		  goto final;
-	} else
-		priva = netdev_priv(arlan_device[devnum]);
-	if (priva == NULL)
-	{
-		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
-		return -1;
-	}
-	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
-	SARLBNpln(u_char, rxBuffer, 0x800);
-final:
-	*lenp = pos;
-	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
-	return retv;
-}
-
-static int arlan_sysctl_info18(ctl_table * ctl, int write,
-			void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int i;
-	int retv, pos, devnum;
-	struct arlan_private *priva = NULL;
-
-	pos = 0;
-	devnum = ctl->procname[5] - '0';
-	if (arlan_device[devnum] == NULL)
-	{
-		pos += sprintf(arlan_drive_info + pos, "No device found here \n");
-		goto final;
-	}
-	else
-		priva = netdev_priv(arlan_device[devnum]);
-	if (priva == NULL)
-	{
-		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
-		return -1;
-	}
-	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
-	SARLBNpln(u_char, _18, 0x800);
-
-final:
-	*lenp = pos;
-	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
-	return retv;
-}
-
-
-#endif				/* #ifdef ARLAN_PROC_SHM_DUMP */
-
-
-static char conf_reset_result[200];
-
-static int arlan_configure(ctl_table * ctl, int write,
-		    void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int pos = 0;
-	int devnum = ctl->procname[6] - '0';
-	struct arlan_private *priv;
-
-	if (devnum < 0 || devnum > MAX_ARLANS - 1)
-	{
-		  printk(KERN_WARNING "too strange devnum in procfs parse\n ");
-		  return -1;
-	}
-	else if (arlan_device[devnum] != NULL)
-	{
-		  priv = netdev_priv(arlan_device[devnum]);
-
-		  arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_CONF);
-	}
-	else
-		return -1;
-
-	*lenp = pos;
-	return proc_dostring(ctl, write, buffer, lenp, ppos);
-}
-
-static int arlan_sysctl_reset(ctl_table * ctl, int write,
-		       void __user *buffer, size_t * lenp, loff_t *ppos)
-{
-	int pos = 0;
-	int devnum = ctl->procname[5] - '0';
-	struct arlan_private *priv;
-
-	if (devnum < 0 || devnum > MAX_ARLANS - 1)
-	{
-		  printk(KERN_WARNING "too strange devnum in procfs parse\n ");
-		  return -1;
-	}
-	else if (arlan_device[devnum] != NULL)
-	{
-		priv = netdev_priv(arlan_device[devnum]);
-		arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_RESET);
-
-	} else
-		return -1;
-	*lenp = pos + 3;
-	return proc_dostring(ctl, write, buffer, lenp, ppos);
-}
-
-
-/* Place files in /proc/sys/dev/arlan */
-#define CTBLN(num,card,nam) \
-        { .ctl_name = num,\
-          .procname = #nam,\
-          .data = &(arlan_conf[card].nam),\
-          .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec}
-#ifdef ARLAN_DEBUGGING
-
-#define ARLAN_PROC_DEBUG_ENTRIES \
-        { .ctl_name = 48, .procname = "entry_exit_debug",\
-          .data = &arlan_entry_and_exit_debug,\
-          .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},\
-	{ .ctl_name = 49, .procname = "debug", .data = &arlan_debug,\
-          .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},
-#else 
-#define ARLAN_PROC_DEBUG_ENTRIES
-#endif
-
-#define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\
-	CTBLN(1,cardNo,spreadingCode),\
-	CTBLN(2,cardNo, channelNumber),\
-	CTBLN(3,cardNo, scramblingDisable),\
-	CTBLN(4,cardNo, txAttenuation),\
-	CTBLN(5,cardNo, systemId), \
-	CTBLN(6,cardNo, maxDatagramSize),\
-	CTBLN(7,cardNo, maxFrameSize),\
-	CTBLN(8,cardNo, maxRetries),\
-	CTBLN(9,cardNo, receiveMode),\
-	CTBLN(10,cardNo, priority),\
-	CTBLN(11,cardNo, rootOrRepeater),\
-	CTBLN(12,cardNo, SID),\
-	CTBLN(13,cardNo, registrationMode),\
-	CTBLN(14,cardNo, registrationFill),\
-	CTBLN(15,cardNo, localTalkAddress),\
-	CTBLN(16,cardNo, codeFormat),\
-	CTBLN(17,cardNo, numChannels),\
-	CTBLN(18,cardNo, channel1),\
-	CTBLN(19,cardNo, channel2),\
-	CTBLN(20,cardNo, channel3),\
-	CTBLN(21,cardNo, channel4),\
-	CTBLN(22,cardNo, txClear),\
-	CTBLN(23,cardNo, txRetries),\
-	CTBLN(24,cardNo, txRouting),\
-	CTBLN(25,cardNo, txScrambled),\
-	CTBLN(26,cardNo, rxParameter),\
-	CTBLN(27,cardNo, txTimeoutMs),\
-	CTBLN(28,cardNo, waitCardTimeout),\
-	CTBLN(29,cardNo, channelSet), \
-	{.ctl_name = 30, .procname = "name",\
-	 .data = arlan_conf[cardNo].siteName,\
-	 .maxlen = 16, .mode = 0600, .proc_handler = &proc_dostring},\
-	CTBLN(31,cardNo,waitTime),\
-	CTBLN(32,cardNo,lParameter),\
-	CTBLN(33,cardNo,_15),\
-	CTBLN(34,cardNo,headerSize),\
-	CTBLN(36,cardNo,tx_delay_ms),\
-	CTBLN(37,cardNo,retries),\
-	CTBLN(38,cardNo,ReTransmitPacketMaxSize),\
-	CTBLN(39,cardNo,waitReTransmitPacketMaxSize),\
-	CTBLN(40,cardNo,fastReTransCount),\
-	CTBLN(41,cardNo,driverRetransmissions),\
-	CTBLN(42,cardNo,txAckTimeoutMs),\
-	CTBLN(43,cardNo,registrationInterrupts),\
-	CTBLN(44,cardNo,hardwareType),\
-	CTBLN(45,cardNo,radioType),\
-	CTBLN(46,cardNo,writeEEPROM),\
-	CTBLN(47,cardNo,writeRadioType),\
-	ARLAN_PROC_DEBUG_ENTRIES\
-	CTBLN(50,cardNo,in_speed),\
-	CTBLN(51,cardNo,out_speed),\
-	CTBLN(52,cardNo,in_speed10),\
-	CTBLN(53,cardNo,out_speed10),\
-	CTBLN(54,cardNo,in_speed_max),\
-	CTBLN(55,cardNo,out_speed_max),\
-	CTBLN(56,cardNo,measure_rate),\
-	CTBLN(57,cardNo,pre_Command_Wait),\
-	CTBLN(58,cardNo,rx_tweak1),\
-	CTBLN(59,cardNo,rx_tweak2),\
-	CTBLN(60,cardNo,tx_queue_len),\
-
-
-
-static ctl_table arlan_conf_table0[] =
-{
-	ARLAN_SYSCTL_TABLE_TOTAL(0)
-
-#ifdef ARLAN_PROC_SHM_DUMP
-	{
-		.ctl_name	= 150,
-		.procname	= "arlan0-txRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_infotxRing,
-	},
-	{
-		.ctl_name	= 151,
-		.procname	= "arlan0-rxRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_inforxRing,
-	},
-	{
-		.ctl_name	= 152,
-		.procname	= "arlan0-18",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info18,
-	},
-	{
-		.ctl_name	= 153,
-		.procname	= "arlan0-ring",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info161719,
-	},
-	{
-		.ctl_name	= 154,
-		.procname	= "arlan0-shm-cpy",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info,
-	},
-#endif
-	{
-		.ctl_name	= 155,
-		.procname	= "config0",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_configure
-	},
-	{
-		.ctl_name	= 156,
-		.procname	= "reset0",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_reset,
-	},
-	{ .ctl_name = 0 }
-};
-
-static ctl_table arlan_conf_table1[] =
-{
-
-	ARLAN_SYSCTL_TABLE_TOTAL(1)
-
-#ifdef ARLAN_PROC_SHM_DUMP
-	{
-		.ctl_name	= 150,
-		.procname	= "arlan1-txRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_infotxRing,
-	},
-	{
-		.ctl_name	= 151,
-		.procname	= "arlan1-rxRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_inforxRing,
-	},
-	{
-		.ctl_name	= 152,
-		.procname	= "arlan1-18",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info18,
-	},
-	{
-		.ctl_name	= 153,
-		.procname	= "arlan1-ring",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info161719,
-	},
-	{
-		.ctl_name	= 154,
-		.procname	= "arlan1-shm-cpy",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info,
-	},
-#endif
-	{
-		.ctl_name	= 155,
-		.procname	= "config1",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_configure,
-	},
-	{
-		.ctl_name	= 156,
-		.procname	= "reset1",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_reset,
-	},
-	{ .ctl_name = 0 }
-};
-
-static ctl_table arlan_conf_table2[] =
-{
-
-	ARLAN_SYSCTL_TABLE_TOTAL(2)
-
-#ifdef ARLAN_PROC_SHM_DUMP
-	{
-		.ctl_name	= 150,
-		.procname	= "arlan2-txRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_infotxRing,
-	},
-	{
-		.ctl_name	= 151,
-		.procname	= "arlan2-rxRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_inforxRing,
-	},
-	{
-		.ctl_name	= 152,
-		.procname	= "arlan2-18",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info18,
-	},
-	{
-		.ctl_name	= 153,
-		.procname	= "arlan2-ring",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info161719,
-	},
-	{
-		.ctl_name	= 154,
-		.procname	= "arlan2-shm-cpy",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info,
-	},
-#endif
-	{
-		.ctl_name	= 155,
-		.procname	= "config2",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_configure,
-	},
-	{
-		.ctl_name	= 156,
-		.procname	= "reset2",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_reset,
-	},
-	{ .ctl_name = 0 }
-};
-
-static ctl_table arlan_conf_table3[] =
-{
-
-	ARLAN_SYSCTL_TABLE_TOTAL(3)
-
-#ifdef ARLAN_PROC_SHM_DUMP
-	{
-		.ctl_name	= 150,
-		.procname	= "arlan3-txRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_infotxRing,
-	},
-	{
-		.ctl_name	= 151,
-		.procname	= "arlan3-rxRing",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_inforxRing,
-	},
-	{
-		.ctl_name	= 152,
-		.procname	= "arlan3-18",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info18,
-	},
-	{
-		.ctl_name	= 153,
-		.procname	= "arlan3-ring",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info161719,
-	},
-	{
-		.ctl_name	= 154,
-		.procname	= "arlan3-shm-cpy",
-		.data		= &arlan_drive_info,
-		.maxlen		= ARLAN_STR_SIZE,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_info,
-	},
-#endif
-	{
-		.ctl_name	= 155,
-		.procname	= "config3",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_configure,
-	},
-	{
-		.ctl_name	= 156,
-		.procname	= "reset3",
-		.data		= &conf_reset_result,
-		.maxlen		= 100,
-		.mode		= 0400,
-		.proc_handler	= &arlan_sysctl_reset,
-	},
-	{ .ctl_name = 0 }
-};
-
-
-
-static ctl_table arlan_table[] =
-{
-	{
-		.ctl_name	= 0,
-		.procname	= "arlan0",
-		.maxlen		= 0,
-		.mode		= 0600,
-		.child		= arlan_conf_table0,
-	},
-	{
-		.ctl_name	= 0,
-		.procname	= "arlan1",
-		.maxlen		= 0,
-		.mode		= 0600,
-		.child		= arlan_conf_table1,
-	},
-	{
-		.ctl_name	= 0,
-		.procname	= "arlan2",
-		.maxlen		= 0,
-		.mode		= 0600,
-		.child		= arlan_conf_table2,
-	},
-	{
-		.ctl_name	= 0,
-		.procname	= "arlan3",
-		.maxlen		= 0,
-		.mode		= 0600,
-		.child		= arlan_conf_table3,
-	},
-	{ .ctl_name = 0 }
-};
-
-#else
-
-static ctl_table arlan_table[MAX_ARLANS + 1] =
-{
-	{ .ctl_name = 0 }
-};
-#endif
-
-
-// static int mmtu = 1234;
-
-static ctl_table arlan_root_table[] =
-{
-	{
-		.ctl_name	= CTL_ARLAN,
-		.procname	= "arlan",
-		.maxlen		= 0,
-		.mode		= 0555,
-		.child		= arlan_table,
-	},
-	{ .ctl_name = 0 }
-};
-
-/* Make sure that /proc/sys/dev is there */
-//static ctl_table arlan_device_root_table[] =
-//{
-//	{CTL_DEV, "dev", NULL, 0, 0555, arlan_root_table},
-//	{0}
-//};
-
-
-static struct ctl_table_header *arlan_device_sysctl_header;
-
-int __init init_arlan_proc(void)
-{
-
-	int i = 0;
-	if (arlan_device_sysctl_header)
-		return 0;
-	for (i = 0; i < MAX_ARLANS && arlan_device[i]; i++)
-		arlan_table[i].ctl_name = i + 1;
-	arlan_device_sysctl_header = register_sysctl_table(arlan_root_table);
-	if (!arlan_device_sysctl_header)
-		return -1;
-
-	return 0;
-
-}
-
-void __exit cleanup_arlan_proc(void)
-{
-	unregister_sysctl_table(arlan_device_sysctl_header);
-	arlan_device_sysctl_header = NULL;
-
-}
-#endif
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 8e1a55d..2517364 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -121,6 +121,14 @@
 	[BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
 	[BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
 };
+MODULE_FIRMWARE("atmel_at76c503-i3861.bin");
+MODULE_FIRMWARE("atmel_at76c503-i3863.bin");
+MODULE_FIRMWARE("atmel_at76c503-rfmd.bin");
+MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin");
+MODULE_FIRMWARE("atmel_at76c505-rfmd.bin");
+MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin");
+MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin");
+MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin");
 
 #define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
 
@@ -524,20 +532,6 @@
 	return ret;
 }
 
-#define MAC2STR_BUFFERS 4
-
-static inline char *mac2str(u8 *mac)
-{
-	static atomic_t a = ATOMIC_INIT(0);
-	static char bufs[MAC2STR_BUFFERS][6 * 3];
-	char *str;
-
-	str = bufs[atomic_inc_return(&a) & (MAC2STR_BUFFERS - 1)];
-	sprintf(str, "%02x:%02x:%02x:%02x:%02x:%02x",
-		mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-	return str;
-}
-
 /* LED trigger */
 static int tx_activity;
 static void at76_ledtrig_tx_timerfunc(unsigned long data);
@@ -973,13 +967,13 @@
 		goto exit;
 	}
 
-	at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %s res 0x%x 0x%x",
+	at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
 		 wiphy_name(priv->hw->wiphy),
-		 mac2str(m->mac_addr), m->res[0], m->res[1]);
+		 m->mac_addr, m->res[0], m->res[1]);
 	for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
-		at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %s, "
+		at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
 			 "status %d", wiphy_name(priv->hw->wiphy), i,
-			 mac2str(m->group_addr[i]), m->group_addr_status[i]);
+			 m->group_addr[i], m->group_addr_status[i]);
 exit:
 	kfree(m);
 }
@@ -1042,7 +1036,7 @@
 	at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
 		 "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
 		 "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
-		 "current_bssid %s current_essid %s current_bss_type %d "
+		 "current_bssid %pM current_essid %s current_bss_type %d "
 		 "pm_mode %d ibss_change %d res %d "
 		 "multi_domain_capability_implemented %d "
 		 "international_roaming %d country_string %.3s",
@@ -1051,7 +1045,7 @@
 		 le16_to_cpu(m->medium_occupancy_limit),
 		 le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
 		 m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
-		 m->CFP_period, mac2str(m->current_bssid),
+		 m->CFP_period, m->current_bssid,
 		 hex2str(m->current_essid, IW_ESSID_MAX_SIZE),
 		 m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
 		 m->res, m->multi_domain_capability_implemented,
@@ -1080,7 +1074,7 @@
 		 "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
 		 "scan_type %d scan_channel %d probe_delay %u "
 		 "min_channel_time %d max_channel_time %d listen_int %d "
-		 "desired_ssid %s desired_bssid %s desired_bsstype %d",
+		 "desired_ssid %s desired_bssid %pM desired_bsstype %d",
 		 wiphy_name(priv->hw->wiphy),
 		 le32_to_cpu(m->max_tx_msdu_lifetime),
 		 le32_to_cpu(m->max_rx_lifetime),
@@ -1092,7 +1086,7 @@
 		 le16_to_cpu(m->max_channel_time),
 		 le16_to_cpu(m->listen_interval),
 		 hex2str(m->desired_ssid, IW_ESSID_MAX_SIZE),
-		 mac2str(m->desired_bssid), m->desired_bsstype);
+		 m->desired_bssid, m->desired_bsstype);
 exit:
 	kfree(m);
 }
@@ -1194,6 +1188,9 @@
 	scan.channel = priv->channel;
 	scan.scan_type = SCAN_TYPE_PASSIVE;
 	scan.international_scan = 0;
+	scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
+	scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
+	scan.probe_delay = cpu_to_le16(0);
 
 	ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
 	if (ret >= 0)
@@ -2217,6 +2214,8 @@
 static int at76_init_new_device(struct at76_priv *priv,
 				struct usb_interface *interface)
 {
+	struct wiphy *wiphy;
+	size_t len;
 	int ret;
 
 	/* set up the endpoint information */
@@ -2254,6 +2253,7 @@
 	priv->device_unplugged = 0;
 
 	/* mac80211 initialisation */
+	wiphy = priv->hw->wiphy;
 	priv->hw->wiphy->max_scan_ssids = 1;
 	priv->hw->wiphy->max_scan_ie_len = 0;
 	priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
@@ -2265,6 +2265,13 @@
 	SET_IEEE80211_DEV(priv->hw, &interface->dev);
 	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
 
+	len = sizeof(wiphy->fw_version);
+	snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
+		 priv->fw_version.major, priv->fw_version.minor,
+		 priv->fw_version.patch, priv->fw_version.build);
+
+	wiphy->hw_version = priv->board_type;
+
 	ret = ieee80211_register_hw(priv->hw);
 	if (ret) {
 		printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
@@ -2274,9 +2281,9 @@
 
 	priv->mac80211_registered = 1;
 
-	printk(KERN_INFO "%s: USB %s, MAC %s, firmware %d.%d.%d-%d\n",
+	printk(KERN_INFO "%s: USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
 	       wiphy_name(priv->hw->wiphy),
-	       dev_name(&interface->dev), mac2str(priv->mac_addr),
+	       dev_name(&interface->dev), priv->mac_addr,
 	       priv->fw_version.major, priv->fw_version.minor,
 	       priv->fw_version.patch, priv->fw_version.build);
 	printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n",
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 11ded15..4e7a7fd 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,6 +1,5 @@
 menuconfig ATH_COMMON
 	tristate "Atheros Wireless Cards"
-	depends on WLAN_80211
 	depends on CFG80211
 	---help---
 	  This will enable the support for the Atheros wireless drivers.
@@ -16,7 +15,15 @@
 	  http://wireless.kernel.org/en/users/Drivers/Atheros
 
 if ATH_COMMON
+
+config ATH_DEBUG
+	bool "Atheros wireless debugging"
+	---help---
+	  Say Y, if you want to debug atheros wireless drivers.
+	  Right now only ath9k makes use of this.
+
 source "drivers/net/wireless/ath/ath5k/Kconfig"
 source "drivers/net/wireless/ath/ath9k/Kconfig"
 source "drivers/net/wireless/ath/ar9170/Kconfig"
+
 endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index 4bb0132..8113a50 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -1,6 +1,11 @@
 obj-$(CONFIG_ATH5K)		+= ath5k/
-obj-$(CONFIG_ATH9K)		+= ath9k/
+obj-$(CONFIG_ATH9K_HW)		+= ath9k/
 obj-$(CONFIG_AR9170_USB)        += ar9170/
 
 obj-$(CONFIG_ATH_COMMON)	+= ath.o
-ath-objs 		:= main.o regd.o
+
+ath-objs :=	main.o \
+		regd.o \
+		hw.o
+
+ath-$(CONFIG_ATH_DEBUG) += debug.o
diff --git a/drivers/net/wireless/ath/ar9170/Kconfig b/drivers/net/wireless/ath/ar9170/Kconfig
index 05918f1..d7a4799 100644
--- a/drivers/net/wireless/ath/ar9170/Kconfig
+++ b/drivers/net/wireless/ath/ar9170/Kconfig
@@ -1,6 +1,6 @@
 config AR9170_USB
 	tristate "Atheros AR9170 802.11n USB support"
-	depends on USB && MAC80211 && WLAN_80211
+	depends on USB && MAC80211
 	select FW_LOADER
 	help
 	  This is a driver for the Atheros "otus" 802.11n USB devices.
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 914e471..9f94598 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -172,8 +172,6 @@
 
 	/* interface mode settings */
 	struct ieee80211_vif *vif;
-	u8 mac_addr[ETH_ALEN];
-	u8 bssid[ETH_ALEN];
 
 	/* beaconing */
 	struct sk_buff *beacon;
@@ -204,6 +202,8 @@
 	u8 power_2G_ht20[8];
 	u8 power_2G_ht40[8];
 
+	u8 phy_heavy_clip;
+
 #ifdef CONFIG_AR9170_LEDS
 	struct delayed_work led_work;
 	struct ar9170_led leds[AR9170_NUM_LEDS];
@@ -231,7 +231,7 @@
 	struct sk_buff_head tx_status_ampdu;
 	spinlock_t tx_ampdu_list_lock;
 	struct list_head tx_ampdu_list;
-	unsigned int tx_ampdu_pending;
+	atomic_t tx_ampdu_pending;
 
 	/* rxstream mpdu merge */
 	struct ar9170_rxstream_mpdu_merge rx_mpdu;
diff --git a/drivers/net/wireless/ath/ar9170/cmd.c b/drivers/net/wireless/ath/ar9170/cmd.c
index f57a620..cf6f5c4 100644
--- a/drivers/net/wireless/ath/ar9170/cmd.c
+++ b/drivers/net/wireless/ath/ar9170/cmd.c
@@ -72,8 +72,7 @@
 	return err;
 }
 
-static int ar9170_read_mreg(struct ar9170 *ar, int nregs,
-			    const u32 *regs, u32 *out)
+int ar9170_read_mreg(struct ar9170 *ar, int nregs, const u32 *regs, u32 *out)
 {
 	int i, err;
 	__le32 *offs, *res;
diff --git a/drivers/net/wireless/ath/ar9170/cmd.h b/drivers/net/wireless/ath/ar9170/cmd.h
index a4f0e50..826c45e 100644
--- a/drivers/net/wireless/ath/ar9170/cmd.h
+++ b/drivers/net/wireless/ath/ar9170/cmd.h
@@ -44,6 +44,7 @@
 int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len);
 int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val);
 int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val);
+int ar9170_read_mreg(struct ar9170 *ar, int nregs, const u32 *regs, u32 *out);
 int ar9170_echo_test(struct ar9170 *ar, u32 v);
 
 /*
diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 6cbfb2f..701ddb7 100644
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -152,14 +152,14 @@
 #define		AR9170_MAC_REG_FTF_BIT14		BIT(14)
 #define		AR9170_MAC_REG_FTF_BIT15		BIT(15)
 #define		AR9170_MAC_REG_FTF_BAR			BIT(24)
-#define		AR9170_MAC_REG_FTF_BIT25		BIT(25)
+#define		AR9170_MAC_REG_FTF_BA			BIT(25)
 #define		AR9170_MAC_REG_FTF_PSPOLL		BIT(26)
 #define		AR9170_MAC_REG_FTF_RTS			BIT(27)
 #define		AR9170_MAC_REG_FTF_CTS			BIT(28)
 #define		AR9170_MAC_REG_FTF_ACK			BIT(29)
 #define		AR9170_MAC_REG_FTF_CFE			BIT(30)
 #define		AR9170_MAC_REG_FTF_CFE_ACK		BIT(31)
-#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0500ffff
+#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0700ffff
 #define		AR9170_MAC_REG_FTF_MONITOR		0xfd00ffff
 
 #define AR9170_MAC_REG_RX_TOTAL			(AR9170_MAC_REG_BASE + 0x6A0)
@@ -311,6 +311,8 @@
 
 #define AR9170_TX_PHY_SHORT_GI			0x80000000
 
+#define AR5416_MAX_RATE_POWER                   63
+
 struct ar9170_rx_head {
 	u8 plcp[12];
 } __packed;
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index 614e321..ddc8c09 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -35,6 +35,9 @@
  *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+
+#include <asm/unaligned.h>
+
 #include "ar9170.h"
 #include "cmd.h"
 
@@ -227,11 +230,8 @@
 
 	ar9170_regwrite_begin(ar);
 
-	ar9170_regwrite(reg,
-			(mac[3] << 24) | (mac[2] << 16) |
-			(mac[1] << 8) | mac[0]);
-
-	ar9170_regwrite(reg + 4, (mac[5] << 8) | mac[4]);
+	ar9170_regwrite(reg, get_unaligned_le32(mac));
+	ar9170_regwrite(reg + 4, get_unaligned_le16(mac + 4));
 
 	ar9170_regwrite_finish();
 
@@ -311,13 +311,14 @@
 
 int ar9170_set_operating_mode(struct ar9170 *ar)
 {
+	struct ath_common *common = &ar->common;
 	u32 pm_mode = AR9170_MAC_REG_POWERMGT_DEFAULTS;
 	u8 *mac_addr, *bssid;
 	int err;
 
 	if (ar->vif) {
-		mac_addr = ar->mac_addr;
-		bssid = ar->bssid;
+		mac_addr = common->macaddr;
+		bssid = common->curbssid;
 
 		switch (ar->vif->type) {
 		case NL80211_IFTYPE_MESH_POINT:
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index c1f8c69..f9d6db8 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -414,9 +414,9 @@
 
 	skb_queue_tail(&ar->tx_status_ampdu, skb);
 	ar9170_tx_fake_ampdu_status(ar);
-	ar->tx_ampdu_pending--;
 
-	if (!list_empty(&ar->tx_ampdu_list) && !ar->tx_ampdu_pending)
+	if (atomic_dec_and_test(&ar->tx_ampdu_pending) &&
+	    !list_empty(&ar->tx_ampdu_list))
 		ar9170_tx_ampdu(ar);
 }
 
@@ -850,6 +850,7 @@
 		}
 		break;
 
+	case AR9170_RX_STATUS_MODULATION_DUPOFDM:
 	case AR9170_RX_STATUS_MODULATION_OFDM:
 		switch (head->plcp[0] & 0xf) {
 		case 0xb:
@@ -897,8 +898,7 @@
 		status->flag |= RX_FLAG_HT;
 		break;
 
-	case AR9170_RX_STATUS_MODULATION_DUPOFDM:
-		/* XXX */
+	default:
 		if (ar9170_nag_limiter(ar))
 			printk(KERN_ERR "%s: invalid modulation\n",
 			       wiphy_name(ar->hw->wiphy));
@@ -1248,6 +1248,7 @@
 	ar->global_ampdu_density = 6;
 	ar->global_ampdu_factor = 3;
 
+	atomic_set(&ar->tx_ampdu_pending, 0);
 	ar->bad_hw_nagger = jiffies;
 
 	err = ar->open(ar);
@@ -1773,7 +1774,7 @@
 					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
 
 			if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
-				ar->tx_ampdu_pending++;
+				atomic_inc(&ar->tx_ampdu_pending);
 
 #ifdef AR9170_QUEUE_DEBUG
 			printk(KERN_DEBUG "%s: send frame q:%d =>\n",
@@ -1784,7 +1785,7 @@
 			err = ar->tx(ar, skb);
 			if (unlikely(err)) {
 				if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
-					ar->tx_ampdu_pending--;
+					atomic_dec(&ar->tx_ampdu_pending);
 
 				frames_failed++;
 				dev_kfree_skb_any(skb);
@@ -1931,7 +1932,7 @@
 	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
 		bool run = ar9170_tx_ampdu_queue(ar, skb);
 
-		if (run || !ar->tx_ampdu_pending)
+		if (run || !atomic_read(&ar->tx_ampdu_pending))
 			ar9170_tx_ampdu(ar);
 	} else {
 		unsigned int queue = skb_get_queue_mapping(skb);
@@ -1952,6 +1953,7 @@
 				   struct ieee80211_if_init_conf *conf)
 {
 	struct ar9170 *ar = hw->priv;
+	struct ath_common *common = &ar->common;
 	int err = 0;
 
 	mutex_lock(&ar->mutex);
@@ -1962,7 +1964,7 @@
 	}
 
 	ar->vif = conf->vif;
-	memcpy(ar->mac_addr, conf->mac_addr, ETH_ALEN);
+	memcpy(common->macaddr, conf->mac_addr, ETH_ALEN);
 
 	if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
 		ar->rx_software_decryption = true;
@@ -2131,12 +2133,13 @@
 				       u32 changed)
 {
 	struct ar9170 *ar = hw->priv;
+	struct ath_common *common = &ar->common;
 	int err = 0;
 
 	mutex_lock(&ar->mutex);
 
 	if (changed & BSS_CHANGED_BSSID) {
-		memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN);
+		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 		err = ar9170_set_operating_mode(ar);
 		if (err)
 			goto out;
@@ -2190,22 +2193,30 @@
 {
 	struct ar9170 *ar = hw->priv;
 	int err;
-	u32 tsf_low;
-	u32 tsf_high;
 	u64 tsf;
+#define NR 3
+	static const u32 addr[NR] = { AR9170_MAC_REG_TSF_H,
+				    AR9170_MAC_REG_TSF_L,
+				    AR9170_MAC_REG_TSF_H };
+	u32 val[NR];
+	int loops = 0;
 
 	mutex_lock(&ar->mutex);
-	err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_L, &tsf_low);
-	if (!err)
-		err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_H, &tsf_high);
+
+	while (loops++ < 10) {
+		err = ar9170_read_mreg(ar, NR, addr, val);
+		if (err || val[0] == val[2])
+			break;
+	}
+
 	mutex_unlock(&ar->mutex);
 
 	if (WARN_ON(err))
 		return 0;
-
-	tsf = tsf_high;
-	tsf = (tsf << 32) | tsf_low;
+	tsf = val[0];
+	tsf = (tsf << 32) | val[1];
 	return tsf;
+#undef NR
 }
 
 static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -2430,6 +2441,7 @@
 }
 
 static int ar9170_ampdu_action(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
 			       enum ieee80211_ampdu_mlme_action action,
 			       struct ieee80211_sta *sta, u16 tid, u16 *ssn)
 {
@@ -2459,7 +2471,7 @@
 		tid_info->state = AR9170_TID_STATE_PROGRESS;
 		tid_info->active = false;
 		spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-		ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		break;
 
 	case IEEE80211_AMPDU_TX_STOP:
@@ -2469,7 +2481,7 @@
 		tid_info->active = false;
 		skb_queue_purge(&tid_info->queue);
 		spin_unlock_irqrestore(&ar->tx_ampdu_list_lock, flags);
-		ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		break;
 
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index dbd488d..45a415e 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -1239,9 +1239,6 @@
 				    struct ar9170_calctl_edges edges[],
 				    u32 freq)
 {
-/* TODO: move somewhere else */
-#define AR5416_MAX_RATE_POWER        63
-
 	int i;
 	u8 rc = AR5416_MAX_RATE_POWER;
 	u8 f;
@@ -1259,10 +1256,11 @@
 			break;
 		}
 		if (i > 0 && f < edges[i].channel) {
-			if (f > edges[i-1].channel &&
-			    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+			if (f > edges[i - 1].channel &&
+			    edges[i - 1].power_flags &
+			    AR9170_CALCTL_EDGE_FLAGS) {
 				/* lower channel has the inband flag set */
-				rc = edges[i-1].power_flags &
+				rc = edges[i - 1].power_flags &
 					~AR9170_CALCTL_EDGE_FLAGS;
 			}
 			break;
@@ -1270,18 +1268,48 @@
 	}
 
 	if (i == AR5416_NUM_BAND_EDGES) {
-		if (f > edges[i-1].channel &&
-		    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+		if (f > edges[i - 1].channel &&
+		    edges[i - 1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
 			/* lower channel has the inband flag set */
-			rc = edges[i-1].power_flags &
+			rc = edges[i - 1].power_flags &
 				~AR9170_CALCTL_EDGE_FLAGS;
 		}
 	}
 	return rc;
 }
 
-/* calculate the conformance test limits and apply them to ar->power*
- * (derived from otus hal/hpmain.c, line 3706 ff.)
+static u8 ar9170_get_heavy_clip(struct ar9170 *ar,
+				struct ar9170_calctl_edges edges[],
+				u32 freq, enum ar9170_bw bw)
+{
+	u8 f;
+	int i;
+	u8 rc = 0;
+
+	if (freq < 3000)
+		f = freq - 2300;
+	else
+		f = (freq - 4800) / 5;
+
+	if (bw == AR9170_BW_40_BELOW || bw == AR9170_BW_40_ABOVE)
+		rc |= 0xf0;
+
+	for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
+		if (edges[i].channel == 0xff)
+			break;
+		if (f == edges[i].channel) {
+			if (!(edges[i].power_flags & AR9170_CALCTL_EDGE_FLAGS))
+				rc |= 0x0f;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/*
+ * calculate the conformance test limits and the heavy clip parameter
+ * and apply them to ar->power* (derived from otus hal/hpmain.c, line 3706)
  */
 static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 {
@@ -1295,7 +1323,8 @@
 		int pwr_cal_len;
 	} *modes;
 
-	/* order is relevant in the mode_list_*: we fall back to the
+	/*
+	 * order is relevant in the mode_list_*: we fall back to the
 	 * lower indices if any mode is missed in the EEPROM.
 	 */
 	struct ctl_modes mode_list_2ghz[] = {
@@ -1313,7 +1342,10 @@
 
 #define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
 
-	/* TODO: investigate the differences between OTUS'
+	ar->phy_heavy_clip = 0;
+
+	/*
+	 * TODO: investigate the differences between OTUS'
 	 * hpreg.c::zfHpGetRegulatoryDomain() and
 	 * ath/regd.c::ath_regd_get_band_ctl() -
 	 * e.g. for FCC3_WORLD the OTUS procedure
@@ -1347,6 +1379,15 @@
 		if (ctl_idx < AR5416_NUM_CTLS) {
 			int f_off = 0;
 
+			/* determine heav clip parameter from
+			   the 11G edges array */
+			if (modes[i].ctl_mode == CTL_11G) {
+				ar->phy_heavy_clip =
+					ar9170_get_heavy_clip(ar,
+							      EDGES(ctl_idx, 1),
+							      freq, bw);
+			}
+
 			/* adjust freq for 40MHz */
 			if (modes[i].ctl_mode == CTL_2GHT40 ||
 			    modes[i].ctl_mode == CTL_5GHT40) {
@@ -1360,13 +1401,15 @@
 				ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
 							  freq+f_off);
 
-			/* TODO: check if the regulatory max. power is
+			/*
+			 * TODO: check if the regulatory max. power is
 			 *  controlled by cfg80211 for DFS
 			 * (hpmain applies it to max_power itself for DFS freq)
 			 */
 
 		} else {
-			/* Workaround in otus driver, hpmain.c, line 3906:
+			/*
+			 * Workaround in otus driver, hpmain.c, line 3906:
 			 * if no data for 5GHT20 are found, take the
 			 * legacy 5G value.
 			 * We extend this here to fallback from any other *HT or
@@ -1390,6 +1433,19 @@
 						       modes[i].max_power);
 		}
 	}
+
+	if (ar->phy_heavy_clip & 0xf0) {
+		ar->power_2G_ht40[0]--;
+		ar->power_2G_ht40[1]--;
+		ar->power_2G_ht40[2]--;
+	}
+	if (ar->phy_heavy_clip & 0xf) {
+		ar->power_2G_ht20[0]++;
+		ar->power_2G_ht20[1]++;
+		ar->power_2G_ht20[2]++;
+	}
+
+
 #undef EDGES
 }
 
@@ -1499,8 +1555,6 @@
 	/* calc. conformance test limits and apply to ar->power*[] */
 	ar9170_calc_ctl(ar, freq, bw);
 
-	/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
-
 	/* set ACK/CTS TX power */
 	ar9170_regwrite_begin(ar);
 
@@ -1643,6 +1697,17 @@
 	if (err)
 		return err;
 
+	if (ar->phy_heavy_clip) {
+		err = ar9170_write_reg(ar, 0x1c59e0,
+				       0x200 | ar->phy_heavy_clip);
+		if (err) {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: failed to set "
+				       "heavy clip\n",
+				       wiphy_name(ar->hw->wiphy));
+		}
+	}
+
 	for (i = 0; i < 2; i++) {
 		ar->noise[i] = ar9170_calc_noise_dbm(
 				(le32_to_cpu(vals[2 + i]) >> 19) & 0x1ff);
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index e974e58..e0799d9 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -68,8 +68,10 @@
 	{ USB_DEVICE(0x0cf3, 0x1002) },
 	/* Cace Airpcap NX */
 	{ USB_DEVICE(0xcace, 0x0300) },
-	/* D-Link DWA 160A */
+	/* D-Link DWA 160 A1 */
 	{ USB_DEVICE(0x07d1, 0x3c10) },
+	/* D-Link DWA 160 A2 */
+	{ USB_DEVICE(0x07d1, 0x3a09) },
 	/* Netgear WNDA3100 */
 	{ USB_DEVICE(0x0846, 0x9010) },
 	/* Netgear WN111 v2 */
@@ -108,15 +110,15 @@
 		return ;
 
 	spin_lock_irqsave(&aru->tx_urb_lock, flags);
-	if (aru->tx_submitted_urbs >= AR9170_NUM_TX_URBS) {
+	if (atomic_read(&aru->tx_submitted_urbs) >= AR9170_NUM_TX_URBS) {
 		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
 		return ;
 	}
-	aru->tx_submitted_urbs++;
+	atomic_inc(&aru->tx_submitted_urbs);
 
 	urb = usb_get_from_anchor(&aru->tx_pending);
 	if (!urb) {
-		aru->tx_submitted_urbs--;
+		atomic_dec(&aru->tx_submitted_urbs);
 		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
 
 		return ;
@@ -133,7 +135,7 @@
 				err);
 
 		usb_unanchor_urb(urb);
-		aru->tx_submitted_urbs--;
+		atomic_dec(&aru->tx_submitted_urbs);
 		ar9170_tx_callback(&aru->common, urb->context);
 	}
 
@@ -151,7 +153,7 @@
 		return ;
 	}
 
-	aru->tx_submitted_urbs--;
+	atomic_dec(&aru->tx_submitted_urbs);
 
 	ar9170_tx_callback(&aru->common, skb);
 
@@ -794,7 +796,7 @@
 	spin_lock_init(&aru->tx_urb_lock);
 
 	aru->tx_pending_urbs = 0;
-	aru->tx_submitted_urbs = 0;
+	atomic_set(&aru->tx_submitted_urbs, 0);
 
 	aru->common.stop = ar9170_usb_stop;
 	aru->common.flush = ar9170_usb_flush;
diff --git a/drivers/net/wireless/ath/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h
index d098f4d..a2ce3b1 100644
--- a/drivers/net/wireless/ath/ar9170/usb.h
+++ b/drivers/net/wireless/ath/ar9170/usb.h
@@ -67,7 +67,7 @@
 	bool req_one_stage_fw;
 
 	spinlock_t tx_urb_lock;
-	unsigned int tx_submitted_urbs;
+	atomic_t tx_submitted_urbs;
 	unsigned int tx_pending_urbs;
 
 	struct completion cmd_wait;
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index a63e90c..9e05648 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -18,6 +18,35 @@
 #define ATH_H
 
 #include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <net/mac80211.h>
+
+/*
+ * The key cache is used for h/w cipher state and also for
+ * tracking station state such as the current tx antenna.
+ * We also setup a mapping table between key cache slot indices
+ * and station state to short-circuit node lookups on rx.
+ * Different parts have different size key caches.  We handle
+ * up to ATH_KEYMAX entries (could dynamically allocate state).
+ */
+#define	ATH_KEYMAX	        128     /* max key cache size we handle */
+
+static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+struct ath_ani {
+	bool caldone;
+	int16_t noise_floor;
+	unsigned int longcal_timer;
+	unsigned int shortcal_timer;
+	unsigned int resetcal_timer;
+	unsigned int checkani_timer;
+	struct timer_list timer;
+};
+
+enum ath_device_state {
+	ATH_HW_UNAVAILABLE,
+	ATH_HW_INITIALIZED,
+};
 
 struct reg_dmn_pair_mapping {
 	u16 regDmnEnum;
@@ -36,13 +65,53 @@
 	struct reg_dmn_pair_mapping *regpair;
 };
 
+struct ath_ops {
+	unsigned int (*read)(void *, u32 reg_offset);
+        void (*write)(void *, u32 val, u32 reg_offset);
+};
+
+struct ath_common;
+
+struct ath_bus_ops {
+	void		(*read_cachesize)(struct ath_common *common, int *csz);
+	void		(*cleanup)(struct ath_common *common);
+	bool		(*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
+	void		(*bt_coex_prep)(struct ath_common *common);
+};
+
 struct ath_common {
+	void *ah;
+	void *priv;
+	struct ieee80211_hw *hw;
+	int debug_mask;
+	enum ath_device_state state;
+
+	struct ath_ani ani;
+
 	u16 cachelsz;
+	u16 curaid;
+	u8 macaddr[ETH_ALEN];
+	u8 curbssid[ETH_ALEN];
+	u8 bssidmask[ETH_ALEN];
+
+	u8 tx_chainmask;
+	u8 rx_chainmask;
+
+	u32 rx_bufsize;
+
+	u32 keymax;
+	DECLARE_BITMAP(keymap, ATH_KEYMAX);
+	u8 splitmic;
+
 	struct ath_regulatory regulatory;
+	const struct ath_ops *ops;
+	const struct ath_bus_ops *bus_ops;
 };
 
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
 				u32 len,
 				gfp_t gfp_mask);
 
+void ath_hw_setbssidmask(struct ath_common *common);
+
 #endif /* ATH_H */
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index 06d0066..eb83b7b 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,6 +1,6 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on PCI && MAC80211 && WLAN_80211
+	depends on PCI && MAC80211
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6cd5efc..6a2a967 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -35,6 +35,7 @@
  * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
  * and clean up common bits, then introduce set/get functions in eeprom.c */
 #include "eeprom.h"
+#include "../ath.h"
 
 /* PCI IDs */
 #define PCI_DEVICE_ID_ATHEROS_AR5210 		0x0007 /* AR5210 */
@@ -165,13 +166,6 @@
 #define AR5K_INI_VAL_XR			0
 #define AR5K_INI_VAL_MAX		5
 
-/* Used for BSSID etc manipulation */
-#define AR5K_LOW_ID(_a)(				\
-(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24	\
-)
-
-#define AR5K_HIGH_ID(_a)	((_a)[4] | (_a)[5] << 8)
-
 /*
  * Some tuneable values (these should be changeable by the user)
  * TODO: Make use of them and add more options OR use debug/configfs
@@ -204,6 +198,7 @@
 #define AR5K_TUNE_CWMAX_11B			1023
 #define AR5K_TUNE_CWMAX_XR			7
 #define AR5K_TUNE_NOISE_FLOOR			-72
+#define AR5K_TUNE_CCA_MAX_GOOD_VALUE		-95
 #define AR5K_TUNE_MAX_TXPOWER			63
 #define AR5K_TUNE_DEFAULT_TXPOWER		25
 #define AR5K_TUNE_TPC_TXPOWER			false
@@ -1012,6 +1007,14 @@
 	} cap_queues;
 };
 
+/* size of noise floor history (keep it a power of two) */
+#define ATH5K_NF_CAL_HIST_MAX	8
+struct ath5k_nfcal_hist
+{
+	s16 index;				/* current index into nfval */
+	s16 nfval[ATH5K_NF_CAL_HIST_MAX];	/* last few noise floors */
+};
+
 
 /***************************************\
   HARDWARE ABSTRACTION LAYER STRUCTURE
@@ -1027,6 +1030,7 @@
 /* TODO: Clean up and merge with ath5k_softc */
 struct ath5k_hw {
 	u32			ah_magic;
+	struct ath_common       common;
 
 	struct ath5k_softc	*ah_sc;
 	void __iomem		*ah_iobase;
@@ -1067,14 +1071,6 @@
 	u8			ah_def_ant;
 	bool			ah_software_retry;
 
-	u8			ah_sta_id[ETH_ALEN];
-
-	/* Current BSSID we are trying to assoc to / create.
-	 * This is passed by mac80211 on config_interface() and cached here for
-	 * use in resets */
-	u8			ah_bssid[ETH_ALEN];
-	u8			ah_bssid_mask[ETH_ALEN];
-
 	int			ah_gpio_npins;
 
 	struct ath5k_capabilities ah_capabilities;
@@ -1125,6 +1121,8 @@
 		struct ieee80211_channel r_last_channel;
 	} ah_radar;
 
+	struct ath5k_nfcal_hist ah_nfcal_hist;
+
 	/* noise floor from last periodic calibration */
 	s32			ah_noise_floor;
 
@@ -1160,7 +1158,7 @@
  */
 
 /* Attach/Detach Functions */
-extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc);
+extern int ath5k_hw_attach(struct ath5k_softc *sc);
 extern void ath5k_hw_detach(struct ath5k_hw *ah);
 
 /* LED functions */
@@ -1203,10 +1201,9 @@
 /* Protocol Control Unit Functions */
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
 /* BSSID Functions */
-extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
-extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
-extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+extern void ath5k_hw_set_associd(struct ath5k_hw *ah);
+extern void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
 /* Receive start/stop functions */
 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
 extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
@@ -1288,8 +1285,10 @@
 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 /* PHY calibration */
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern s16 ath5k_hw_get_noise_floor(struct ath5k_hw *ah);
 extern void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
 /* Spur mitigation */
 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
@@ -1329,17 +1328,21 @@
 	return turbo ? (clock / 80) : (clock / 40);
 }
 
-/*
- * Read from a register
- */
+static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
+{
+        return &ah->common;
+}
+
+static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
+{
+        return &(ath5k_hw_common(ah)->regulatory);
+}
+
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->ah_iobase + reg);
 }
 
-/*
- * Write to a register
- */
 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 {
 	iowrite32(val, ah->ah_iobase + reg);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 71a1bd25..4228444 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -101,25 +101,15 @@
  * -ENODEV if the device is not supported or prints an error msg if something
  * else went wrong.
  */
-struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc)
+int ath5k_hw_attach(struct ath5k_softc *sc)
 {
-	struct ath5k_hw *ah;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	struct pci_dev *pdev = sc->pdev;
 	struct ath5k_eeprom_info *ee;
 	int ret;
 	u32 srev;
 
-	/*If we passed the test malloc a ath5k_hw struct*/
-	ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
-	if (ah == NULL) {
-		ret = -ENOMEM;
-		ATH5K_ERR(sc, "out of memory\n");
-		goto err;
-	}
-
-	ah->ah_sc = sc;
-	ah->ah_iobase = sc->iobase;
-
 	/*
 	 * HW information
 	 */
@@ -278,12 +268,12 @@
 		goto err_free;
 	}
 
+	ee = &ah->ah_capabilities.cap_eeprom;
+
 	/*
 	 * Write PCI-E power save settings
 	 */
 	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
-		struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-
 		ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
 		ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
 
@@ -321,7 +311,6 @@
 	}
 
 	/* Crypto settings */
-	ee = &ah->ah_capabilities.cap_eeprom;
 	ah->ah_aes_support = srev >= AR5K_SREV_AR5212_V4 &&
 		(ee->ee_version >= AR5K_EEPROM_VERSION_5_0 &&
 		 !AR5K_EEPROM_AES_DIS(ee->ee_misc5));
@@ -336,20 +325,21 @@
 	ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){});
 
 	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
-	memset(ah->ah_bssid, 0xff, ETH_ALEN);
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+	memcpy(common->curbssid, ath_bcast_mac, ETH_ALEN);
+	ath5k_hw_set_associd(ah);
 	ath5k_hw_set_opmode(ah);
 
 	ath5k_hw_rfgain_opt_init(ah);
 
+	ath5k_hw_init_nfcal_hist(ah);
+
 	/* turn on HW LEDs */
 	ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);
 
-	return ah;
+	return 0;
 err_free:
 	kfree(ah);
-err:
-	return ERR_PTR(ret);
+	return ret;
 }
 
 /**
@@ -369,5 +359,4 @@
 	ath5k_eeprom_detach(ah);
 
 	/* assume interrupts are down */
-	kfree(ah);
 }
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 95a8e23..a4c086f 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -195,12 +195,13 @@
 				const struct pci_device_id *id);
 static void __devexit	ath5k_pci_remove(struct pci_dev *pdev);
 #ifdef CONFIG_PM
-static int		ath5k_pci_suspend(struct pci_dev *pdev,
-					pm_message_t state);
-static int		ath5k_pci_resume(struct pci_dev *pdev);
+static int		ath5k_pci_suspend(struct device *dev);
+static int		ath5k_pci_resume(struct device *dev);
+
+SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
+#define ATH5K_PM_OPS	(&ath5k_pm_ops)
 #else
-#define ath5k_pci_suspend NULL
-#define ath5k_pci_resume NULL
+#define ATH5K_PM_OPS	NULL
 #endif /* CONFIG_PM */
 
 static struct pci_driver ath5k_pci_driver = {
@@ -208,8 +209,7 @@
 	.id_table	= ath5k_pci_id_table,
 	.probe		= ath5k_pci_probe,
 	.remove		= __devexit_p(ath5k_pci_remove),
-	.suspend	= ath5k_pci_suspend,
-	.resume		= ath5k_pci_resume,
+	.driver.pm	= ATH5K_PM_OPS,
 };
 
 
@@ -323,10 +323,13 @@
 static inline void ath5k_rxbuf_free(struct ath5k_softc *sc,
 				struct ath5k_buf *bf)
 {
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
+
 	BUG_ON(!bf);
 	if (!bf->skb)
 		return;
-	pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+	pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize,
 			PCI_DMA_FROMDEVICE);
 	dev_kfree_skb_any(bf->skb);
 	bf->skb = NULL;
@@ -437,6 +440,22 @@
 
 	return name;
 }
+static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
+{
+	struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+	return ath5k_hw_reg_read(ah, reg_offset);
+}
+
+static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+	struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+	ath5k_hw_reg_write(ah, val, reg_offset);
+}
+
+static const struct ath_ops ath5k_common_ops = {
+	.read = ath5k_ioread32,
+	.write = ath5k_iowrite32,
+};
 
 static int __devinit
 ath5k_pci_probe(struct pci_dev *pdev,
@@ -444,6 +463,7 @@
 {
 	void __iomem *mem;
 	struct ath5k_softc *sc;
+	struct ath_common *common;
 	struct ieee80211_hw *hw;
 	int ret;
 	u8 csz;
@@ -547,7 +567,6 @@
 	__set_bit(ATH_STAT_INVALID, sc->status);
 
 	sc->iobase = mem; /* So we can unmap it on detach */
-	sc->common.cachelsz = csz << 2; /* convert to bytes */
 	sc->opmode = NL80211_IFTYPE_STATION;
 	sc->bintval = 1000;
 	mutex_init(&sc->lock);
@@ -565,13 +584,28 @@
 		goto err_free;
 	}
 
-	/* Initialize device */
-	sc->ah = ath5k_hw_attach(sc);
-	if (IS_ERR(sc->ah)) {
-		ret = PTR_ERR(sc->ah);
+	/*If we passed the test malloc a ath5k_hw struct*/
+	sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+	if (!sc->ah) {
+		ret = -ENOMEM;
+		ATH5K_ERR(sc, "out of memory\n");
 		goto err_irq;
 	}
 
+	sc->ah->ah_sc = sc;
+	sc->ah->ah_iobase = sc->iobase;
+	common = ath5k_hw_common(sc->ah);
+	common->ops = &ath5k_common_ops;
+	common->ah = sc->ah;
+	common->hw = hw;
+	common->cachelsz = csz << 2; /* convert to bytes */
+
+	/* Initialize device */
+	ret = ath5k_hw_attach(sc);
+	if (ret) {
+		goto err_free_ah;
+	}
+
 	/* set up multi-rate retry capabilities */
 	if (sc->ah->ah_version == AR5K_AR5212) {
 		hw->max_rates = 4;
@@ -640,6 +674,8 @@
 	ath5k_hw_detach(sc->ah);
 err_irq:
 	free_irq(pdev->irq, sc);
+err_free_ah:
+	kfree(sc->ah);
 err_free:
 	ieee80211_free_hw(hw);
 err_map:
@@ -661,6 +697,7 @@
 	ath5k_debug_finish_device(sc);
 	ath5k_detach(pdev, hw);
 	ath5k_hw_detach(sc->ah);
+	kfree(sc->ah);
 	free_irq(pdev->irq, sc);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
@@ -669,33 +706,20 @@
 }
 
 #ifdef CONFIG_PM
-static int
-ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ath5k_pci_suspend(struct device *dev)
 {
-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev));
 	struct ath5k_softc *sc = hw->priv;
 
 	ath5k_led_off(sc);
-
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 
-static int
-ath5k_pci_resume(struct pci_dev *pdev)
+static int ath5k_pci_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;
-	int err;
-
-	pci_restore_state(pdev);
-
-	err = pci_enable_device(pdev);
-	if (err)
-		return err;
 
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
@@ -718,7 +742,7 @@
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath5k_softc *sc = hw->priv;
-	struct ath_regulatory *regulatory = &sc->common.regulatory;
+	struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah);
 
 	return ath_reg_notifier_apply(wiphy, request, regulatory);
 }
@@ -728,7 +752,7 @@
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
-	struct ath_regulatory *regulatory = &sc->common.regulatory;
+	struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
 	u8 mac[ETH_ALEN] = {};
 	int ret;
 
@@ -815,7 +839,7 @@
 
 	SET_IEEE80211_PERM_ADDR(hw, mac);
 	/* All MAC address bits matter for ACKs */
-	memset(sc->bssidmask, 0xff, ETH_ALEN);
+	memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
 	ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
 
 	regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
@@ -1152,24 +1176,26 @@
 static
 struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
 {
+	struct ath_common *common = ath5k_hw_common(sc->ah);
 	struct sk_buff *skb;
 
 	/*
 	 * Allocate buffer with headroom_needed space for the
 	 * fake physical layer header at the start.
 	 */
-	skb = ath_rxbuf_alloc(&sc->common,
-			      sc->rxbufsize + sc->common.cachelsz - 1,
+	skb = ath_rxbuf_alloc(common,
+			      common->rx_bufsize,
 			      GFP_ATOMIC);
 
 	if (!skb) {
 		ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
-				sc->rxbufsize + sc->common.cachelsz - 1);
+				common->rx_bufsize);
 		return NULL;
 	}
 
 	*skb_addr = pci_map_single(sc->pdev,
-		skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
+				   skb->data, common->rx_bufsize,
+				   PCI_DMA_FROMDEVICE);
 	if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
 		ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
 		dev_kfree_skb(skb);
@@ -1605,13 +1631,14 @@
 ath5k_rx_start(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	struct ath5k_buf *bf;
 	int ret;
 
-	sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->common.cachelsz);
+	common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz);
 
-	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
-		sc->common.cachelsz, sc->rxbufsize);
+	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
+		  common->cachelsz, common->rx_bufsize);
 
 	spin_lock_bh(&sc->rxbuflock);
 	sc->rxlink = NULL;
@@ -1656,6 +1683,8 @@
 ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
 		struct sk_buff *skb, struct ath5k_rx_status *rs)
 {
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	struct ieee80211_hdr *hdr = (void *)skb->data;
 	unsigned int keyix, hlen;
 
@@ -1672,7 +1701,7 @@
 	    skb->len >= hlen + 4) {
 		keyix = skb->data[hlen + 3] >> 6;
 
-		if (test_bit(keyix, sc->keymap))
+		if (test_bit(keyix, common->keymap))
 			return RX_FLAG_DECRYPTED;
 	}
 
@@ -1684,13 +1713,14 @@
 ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
 		     struct ieee80211_rx_status *rxs)
 {
+	struct ath_common *common = ath5k_hw_common(sc->ah);
 	u64 tsf, bc_tstamp;
 	u32 hw_tu;
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
 
 	if (ieee80211_is_beacon(mgmt->frame_control) &&
 	    le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
-	    memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
+	    memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
 		/*
 		 * Received an IBSS beacon with the same BSSID. Hardware *must*
 		 * have updated the local TSF. We have to work around various
@@ -1745,6 +1775,8 @@
 	struct sk_buff *skb, *next_skb;
 	dma_addr_t next_skb_addr;
 	struct ath5k_softc *sc = (void *)data;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	struct ath5k_buf *bf;
 	struct ath5k_desc *ds;
 	int ret;
@@ -1822,7 +1854,7 @@
 		if (!next_skb)
 			goto next;
 
-		pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
+		pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize,
 				PCI_DMA_FROMDEVICE);
 		skb_put(skb, rs.rs_datalen);
 
@@ -3008,6 +3040,8 @@
 	      struct ieee80211_key_conf *key)
 {
 	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	int ret = 0;
 
 	if (modparam_nohwcrypt)
@@ -3040,14 +3074,14 @@
 			ATH5K_ERR(sc, "can't set the key\n");
 			goto unlock;
 		}
-		__set_bit(key->keyidx, sc->keymap);
+		__set_bit(key->keyidx, common->keymap);
 		key->hw_key_idx = key->keyidx;
 		key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
 			       IEEE80211_KEY_FLAG_GENERATE_MMIC);
 		break;
 	case DISABLE_KEY:
 		ath5k_hw_reset_key(sc->ah, key->keyidx);
-		__clear_bit(key->keyidx, sc->keymap);
+		__clear_bit(key->keyidx, common->keymap);
 		break;
 	default:
 		ret = -EINVAL;
@@ -3176,6 +3210,7 @@
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	unsigned long flags;
 
 	mutex_lock(&sc->lock);
@@ -3184,10 +3219,9 @@
 
 	if (changes & BSS_CHANGED_BSSID) {
 		/* Cache for later use during resets */
-		memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN);
-		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
-		 * a clean way of letting us retrieve this yet. */
-		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+		common->curaid = 0;
+		ath5k_hw_set_associd(ah);
 		mmiowb();
 	}
 
@@ -3200,6 +3234,14 @@
 			set_beacon_filter(hw, sc->assoc);
 		ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
 			AR5K_LED_ASSOC : AR5K_LED_INIT);
+		if (bss_conf->assoc) {
+			ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
+				  "Bss Info ASSOC %d, bssid: %pM\n",
+				  bss_conf->aid, common->curbssid);
+			common->curaid = bss_conf->aid;
+			ath5k_hw_set_associd(ah);
+			/* Once ANI is available you would start it here */
+		}
 	}
 
 	if (changes & BSS_CHANGED_BEACON) {
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index a28c42f..b72338c 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -115,7 +115,6 @@
  * associated with an instance of a device */
 struct ath5k_softc {
 	struct pci_dev		*pdev;		/* for dma mapping */
-	struct ath_common	common;
 	void __iomem		*iobase;	/* address of the device */
 	struct mutex		lock;		/* dev-level lock */
 	struct ieee80211_tx_queue_stats tx_stats[AR5K_NUM_TX_QUEUES];
@@ -154,8 +153,6 @@
 
 	enum ath5k_int		imask;		/* interrupt mask copy */
 
-	DECLARE_BITMAP(keymap, AR5K_KEYCACHE_SIZE); /* key use bit map */
-
 	u8			bssidmask[ETH_ALEN];
 
 	unsigned int		led_pin,	/* GPIO pin for driving LED */
@@ -202,15 +199,4 @@
 #define ath5k_hw_hasveol(_ah) \
 	(ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0)
 
-static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
-{
-	return &ah->ah_sc->common;
-}
-
-static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
-{
-	return &(ath5k_hw_common(ah)->regulatory);
-
-}
-
 #endif
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 18eb519..8fa4393 100644
--- a/drivers/net/wireless/ath/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -560,8 +560,8 @@
 	{ AR5K_SLEEP0,		0x0002aaaa },
 	{ AR5K_SLEEP1,		0x02005555 },
 	{ AR5K_SLEEP2,		0x00000000 },
-	{ AR5K_BSS_IDM0,	0xffffffff },
-	{ AR5K_BSS_IDM1,	0x0000ffff },
+	{ AR_BSSMSKL,		0xffffffff },
+	{ AR_BSSMSKU,		0x0000ffff },
 	{ AR5K_TXPC,		0x00000000 },
 	{ AR5K_PROFCNT_TX,	0x00000000 },
 	{ AR5K_PROFCNT_RX,	0x00000000 },
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index b548c8e..d495890 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -59,6 +59,8 @@
 	{ ATH_SDEVICE(PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID), ATH_LED(1, 1) },
 	/* Acer Aspire One A150 (maximlevitsky@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe008), ATH_LED(3, 0) },
+	/* Acer Aspire One AO531h AO751h (keng-yu.lin@canonical.com) */
+	{ ATH_SDEVICE(PCI_VENDOR_ID_FOXCONN, 0xe00d), ATH_LED(3, 0) },
 	/* Acer Ferrari 5000 (russ.dill@gmail.com) */
 	{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
 	/* E-machines E510 (tuliom@gmail.com) */
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 2942f13..64fc1eb 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -24,6 +24,8 @@
 * Protocol Control Unit Functions *
 \*********************************/
 
+#include <asm/unaligned.h>
+
 #include "ath5k.h"
 #include "reg.h"
 #include "debug.h"
@@ -44,6 +46,7 @@
  */
 int ath5k_hw_set_opmode(struct ath5k_hw *ah)
 {
+	struct ath_common *common = ath5k_hw_common(ah);
 	u32 pcu_reg, beacon_reg, low_id, high_id;
 
 
@@ -95,8 +98,8 @@
 	/*
 	 * Set PCU registers
 	 */
-	low_id = AR5K_LOW_ID(ah->ah_sta_id);
-	high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+	low_id = get_unaligned_le32(common->macaddr);
+	high_id = get_unaligned_le16(common->macaddr + 4);
 	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
 	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
 
@@ -238,28 +241,6 @@
 	return 0;
 }
 
-
-/****************\
-* BSSID handling *
-\****************/
-
-/**
- * ath5k_hw_get_lladdr - Get station id
- *
- * @ah: The &struct ath5k_hw
- * @mac: The card's mac address
- *
- * Initialize ah->ah_sta_id using the mac address provided
- * (just a memcpy).
- *
- * TODO: Remove it once we merge ath5k_softc and ath5k_hw
- */
-void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	memcpy(mac, ah->ah_sta_id, ETH_ALEN);
-}
-
 /**
  * ath5k_hw_set_lladdr - Set station id
  *
@@ -270,17 +251,18 @@
  */
 int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
 {
+	struct ath_common *common = ath5k_hw_common(ah);
 	u32 low_id, high_id;
 	u32 pcu_reg;
 
 	ATH5K_TRACE(ah->ah_sc);
 	/* Set new station ID */
-	memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+	memcpy(common->macaddr, mac, ETH_ALEN);
 
 	pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
 
-	low_id = AR5K_LOW_ID(mac);
-	high_id = AR5K_HIGH_ID(mac);
+	low_id = get_unaligned_le32(mac);
+	high_id = get_unaligned_le16(mac + 4);
 
 	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
 	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
@@ -297,159 +279,51 @@
  *
  * Sets the BSSID which trigers the "SME Join" operation
  */
-void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+void ath5k_hw_set_associd(struct ath5k_hw *ah)
 {
-	u32 low_id, high_id;
+	struct ath_common *common = ath5k_hw_common(ah);
 	u16 tim_offset = 0;
 
 	/*
 	 * Set simple BSSID mask on 5212
 	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask),
-							AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask),
-							AR5K_BSS_IDM1);
-	}
+	if (ah->ah_version == AR5K_AR5212)
+		ath_hw_setbssidmask(common);
 
 	/*
 	 * Set BSSID which triggers the "SME Join" operation
 	 */
-	low_id = AR5K_LOW_ID(bssid);
-	high_id = AR5K_HIGH_ID(bssid);
-	ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
-	ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
-				AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+	ath5k_hw_reg_write(ah,
+			   get_unaligned_le32(common->curbssid),
+			   AR5K_BSS_ID0);
+	ath5k_hw_reg_write(ah,
+			   get_unaligned_le16(common->curbssid + 4) |
+			   ((common->curaid & 0x3fff) << AR5K_BSS_ID1_AID_S),
+			   AR5K_BSS_ID1);
 
-	if (assoc_id == 0) {
+	if (common->curaid == 0) {
 		ath5k_hw_disable_pspoll(ah);
 		return;
 	}
 
 	AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
-			tim_offset ? tim_offset + 4 : 0);
+			    tim_offset ? tim_offset + 4 : 0);
 
 	ath5k_hw_enable_pspoll(ah, NULL, 0);
 }
 
-/**
- * ath5k_hw_set_bssid_mask - filter out bssids we listen
- *
- * @ah: the &struct ath5k_hw
- * @mask: the bssid_mask, a u8 array of size ETH_ALEN
- *
- * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
- * which bits of the interface's MAC address should be looked at when trying
- * to decide which packets to ACK. In station mode and AP mode with a single
- * BSS every bit matters since we lock to only one BSS. In AP mode with
- * multiple BSSes (virtual interfaces) not every bit matters because hw must
- * accept frames for all BSSes and so we tweak some bits of our mac address
- * in order to have multiple BSSes.
- *
- * NOTE: This is a simple filter and does *not* filter out all
- * relevant frames. Some frames that are not for us might get ACKed from us
- * by PCU because they just match the mask.
- *
- * When handling multiple BSSes you can get the BSSID mask by computing the
- * set of  ~ ( MAC XOR BSSID ) for all bssids we handle.
- *
- * When you do this you are essentially computing the common bits of all your
- * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
- * the MAC address to obtain the relevant bits and compare the result with
- * (frame's BSSID & mask) to see if they match.
- */
-/*
- * Simple example: on your card you have have two BSSes you have created with
- * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
- * There is another BSSID-03 but you are not part of it. For simplicity's sake,
- * assuming only 4 bits for a mac address and for BSSIDs you can then have:
- *
- *                  \
- * MAC:                0001 |
- * BSSID-01:   0100 | --> Belongs to us
- * BSSID-02:   1001 |
- *                  /
- * -------------------
- * BSSID-03:   0110  | --> External
- * -------------------
- *
- * Our bssid_mask would then be:
- *
- *             On loop iteration for BSSID-01:
- *             ~(0001 ^ 0100)  -> ~(0101)
- *                             ->   1010
- *             bssid_mask      =    1010
- *
- *             On loop iteration for BSSID-02:
- *             bssid_mask &= ~(0001   ^   1001)
- *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
- *             bssid_mask =   (1010)  & ~(1001)
- *             bssid_mask =   (1010)  &  (0110)
- *             bssid_mask =   0010
- *
- * A bssid_mask of 0010 means "only pay attention to the second least
- * significant bit". This is because its the only bit common
- * amongst the MAC and all BSSIDs we support. To findout what the real
- * common bit is we can simply "&" the bssid_mask now with any BSSID we have
- * or our MAC address (we assume the hardware uses the MAC address).
- *
- * Now, suppose there's an incoming frame for BSSID-03:
- *
- * IFRAME-01:  0110
- *
- * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
- * hardware to only look at the second least significant bit and the
- * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
- * as 1, which does not match 0.
- *
- * So with IFRAME-01 we *assume* the hardware will do:
- *
- *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
- *  --> allow = (0010) == 0000 ? 1 : 0;
- *  --> allow = 0
- *
- *  Lets now test a frame that should work:
- *
- * IFRAME-02:  0001 (we should allow)
- *
- *     allow = (0001 & 1010) == 1010
- *
- *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
- *  --> allow = (0010) == (0010)
- *  --> allow = 1
- *
- * Other examples:
- *
- * IFRAME-03:  0100 --> allowed
- * IFRAME-04:  1001 --> allowed
- * IFRAME-05:  1101 --> allowed but its not for us!!!
- *
- */
-int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
 {
-	u32 low_id, high_id;
+	struct ath_common *common = ath5k_hw_common(ah);
 	ATH5K_TRACE(ah->ah_sc);
 
 	/* Cache bssid mask so that we can restore it
 	 * on reset */
-	memcpy(ah->ah_bssid_mask, mask, ETH_ALEN);
-	if (ah->ah_version == AR5K_AR5212) {
-		low_id = AR5K_LOW_ID(mask);
-		high_id = AR5K_HIGH_ID(mask);
-
-		ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
-
-		return 0;
-	}
-
-	return -EIO;
+	memcpy(common->bssidmask, mask, ETH_ALEN);
+	if (ah->ah_version == AR5K_AR5212)
+		ath_hw_setbssidmask(common);
 }
 
-
 /************\
 * RX Control *
 \************/
@@ -1157,14 +1031,17 @@
 	 /* Invalid entry (key table overflow) */
 	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
 
-	/* MAC may be NULL if it's a broadcast key. In this case no need to
-	 * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+	/*
+	 * MAC may be NULL if it's a broadcast key. In this case no need to
+	 * to compute get_unaligned_le32 and get_unaligned_le16 as we
+	 * already know it.
+	 */
 	if (!mac) {
 		low_id = 0xffffffff;
 		high_id = 0xffff | AR5K_KEYTABLE_VALID;
 	} else {
-		low_id = AR5K_LOW_ID(mac);
-		high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+		low_id = get_unaligned_le32(mac);
+		high_id = get_unaligned_le16(mac + 4) | AR5K_KEYTABLE_VALID;
 	}
 
 	ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 1a039f2..bbfdcd5 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1124,77 +1124,148 @@
 		ah->ah_swi_mask = AR5K_SWI_FULL_CALIBRATION;
 		AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI);
 	}
-
 }
 
-/**
- * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
- *
- * @ah: struct ath5k_hw pointer we are operating on
- * @freq: the channel frequency, just used for error logging
- *
- * This function performs a noise floor calibration of the PHY and waits for
- * it to complete. Then the noise floor value is compared to some maximum
- * noise floor we consider valid.
- *
- * Note that this is different from what the madwifi HAL does: it reads the
- * noise floor and afterwards initiates the calibration. Since the noise floor
- * calibration can take some time to finish, depending on the current channel
- * use, that avoids the occasional timeout warnings we are seeing now.
- *
- * See the following link for an Atheros patent on noise floor calibration:
- * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
- * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
- *
- * XXX: Since during noise floor calibration antennas are detached according to
- * the patent, we should stop tx queues here.
- */
-int
-ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
+static int sign_extend(int val, const int nbits)
 {
-	int ret;
-	unsigned int i;
-	s32 noise_floor;
+	int order = BIT(nbits-1);
+	return (val ^ order) - order;
+}
 
-	/*
-	 * Enable noise floor calibration
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_NF);
+static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
+{
+	s32 val;
 
-	ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_NF, 0, false);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc,
-			"noise floor calibration timeout (%uMHz)\n", freq);
-		return -EAGAIN;
-	}
+	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
+	return sign_extend(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 9);
+}
 
-	/* Wait until the noise floor is calibrated and read the value */
-	for (i = 20; i > 0; i--) {
-		mdelay(1);
-		noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
-		noise_floor = AR5K_PHY_NF_RVAL(noise_floor);
-		if (noise_floor & AR5K_PHY_NF_ACTIVE) {
-			noise_floor = AR5K_PHY_NF_AVAL(noise_floor);
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
+{
+	int i;
 
-			if (noise_floor <= AR5K_TUNE_NOISE_FLOOR)
-				break;
+	ah->ah_nfcal_hist.index = 0;
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++)
+		ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+}
+
+static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
+{
+	struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
+	hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1);
+	hist->nfval[hist->index] = noise_floor;
+}
+
+static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
+{
+	s16 sort[ATH5K_NF_CAL_HIST_MAX];
+	s16 tmp;
+	int i, j;
+
+	memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort));
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) {
+		for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) {
+			if (sort[j] > sort[j-1]) {
+				tmp = sort[j];
+				sort[j] = sort[j-1];
+				sort[j-1] = tmp;
+			}
 		}
 	}
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"cal %d:%d\n", i, sort[i]);
+	}
+	return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2];
+}
 
-	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
-		"noise floor %d\n", noise_floor);
+/*
+ * When we tell the hardware to perform a noise floor calibration
+ * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically
+ * sample-and-hold the minimum noise level seen at the antennas.
+ * This value is then stored in a ring buffer of recently measured
+ * noise floor values so we have a moving window of the last few
+ * samples.
+ *
+ * The median of the values in the history is then loaded into the
+ * hardware for its own use for RSSI and CCA measurements.
+ */
+void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 val;
+	s16 nf, threshold;
+	u8 ee_mode;
 
-	if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
-		ATH5K_ERR(ah->ah_sc,
-			"noise floor calibration failed (%uMHz)\n", freq);
-		return -EAGAIN;
+	/* keep last value if calibration hasn't completed */
+	if (ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL) & AR5K_PHY_AGCCTL_NF) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"NF did not complete in calibration window\n");
+
+		return;
 	}
 
-	ah->ah_noise_floor = noise_floor;
+	switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	default:
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
+	}
 
-	return 0;
+
+	/* completed NF calibration, test threshold */
+	nf = ath5k_hw_read_measured_noise_floor(ah);
+	threshold = ee->ee_noise_floor_thr[ee_mode];
+
+	if (nf > threshold) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"noise floor failure detected; "
+			"read %d, threshold %d\n",
+			nf, threshold);
+
+		nf = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+	}
+
+	ath5k_hw_update_nfcal_hist(ah, nf);
+	nf = ath5k_hw_get_median_noise_floor(ah);
+
+	/* load noise floor (in .5 dBm) so the hardware will use it */
+	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF) & ~AR5K_PHY_NF_M;
+	val |= (nf * 2) & AR5K_PHY_NF_M;
+	ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+
+	AR5K_REG_MASKED_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+		~(AR5K_PHY_AGCCTL_NF_EN | AR5K_PHY_AGCCTL_NF_NOUPDATE));
+
+	ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+		0, false);
+
+	/*
+	 * Load a high max CCA Power value (-50 dBm in .5 dBm units)
+	 * so that we're not capped by the median we just loaded.
+	 * This will be used as the initial value for the next noise
+	 * floor calibration.
+	 */
+	val = (val & ~AR5K_PHY_NF_M) | ((-50 * 2) & AR5K_PHY_NF_M);
+	ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+		AR5K_PHY_AGCCTL_NF_EN |
+		AR5K_PHY_AGCCTL_NF_NOUPDATE |
+		AR5K_PHY_AGCCTL_NF);
+
+	ah->ah_noise_floor = nf;
+
+	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+		"noise floor calibrated: %d\n", nf);
 }
 
 /*
@@ -1287,7 +1358,7 @@
 		return ret;
 	}
 
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	ath5k_hw_update_noise_floor(ah);
 
 	/*
 	 * Re-enable RX/TX and beacons
@@ -1328,7 +1399,7 @@
 	if (i_coffd == 0 || q_coffd == 0)
 		goto done;
 
-	i_coff = ((-iq_corr) / i_coffd) & 0x3f;
+	i_coff = ((-iq_corr) / i_coffd);
 
 	/* Boundary check */
 	if (i_coff > 31)
@@ -1336,7 +1407,7 @@
 	if (i_coff < -32)
 		i_coff = -32;
 
-	q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f;
+	q_coff = (((s32)i_pwr / q_coffd) - 128);
 
 	/* Boundary check */
 	if (q_coff > 15)
@@ -1360,7 +1431,7 @@
 	 * since noise floor calibration interrupts rx path while I/Q
 	 * calibration doesn't. We don't need to run noise floor calibration
 	 * as often as I/Q calibration.*/
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	ath5k_hw_update_noise_floor(ah);
 
 	/* Initiate a gain_F calibration */
 	ath5k_hw_request_rfgain_probe(ah);
@@ -2954,8 +3025,6 @@
 		ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
 		return -EINVAL;
 	}
-	if (txpower == 0)
-		txpower = AR5K_TUNE_DEFAULT_TXPOWER;
 
 	/* Reset TX power values */
 	memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index c63ea6a..4cb9c5d 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -35,7 +35,7 @@
  * released by Atheros and on various debug messages found on the net.
  */
 
-
+#include "../reg.h"
 
 /*====MAC DMA REGISTERS====*/
 
@@ -1650,12 +1650,6 @@
 #define AR5K_SLEEP2_DTIM_PER_S		16
 
 /*
- * BSSID mask registers
- */
-#define AR5K_BSS_IDM0			0x80e0	/* Upper bits */
-#define AR5K_BSS_IDM1			0x80e4	/* Lower bits */
-
-/*
  * TX power control (TPC) register
  *
  * XXX: PCDAC steps (0.5dbm) or DBM ?
@@ -2039,17 +2033,14 @@
 #define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
- * PHY noise floor status register
+ * PHY noise floor status register (CCA = Clear Channel Assessment)
  */
 #define AR5K_PHY_NF			0x9864			/* Register address */
-#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor mask */
-#define AR5K_PHY_NF_ACTIVE		0x00000100	/* Noise floor calibration still active */
-#define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
-#define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
-#define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor, written to hardware in 1/2 dBm units */
+#define AR5K_PHY_NF_SVAL(_n)           (((_n) & AR5K_PHY_NF_M) | (1 << 9))
 #define	AR5K_PHY_NF_THRESH62		0x0007f000	/* Thresh62 -check ANI patent- (field) */
 #define	AR5K_PHY_NF_THRESH62_S		12
-#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* ??? */
+#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* Minimum measured noise level, read from hardware in 1 dBm units */
 #define	AR5K_PHY_NF_MINCCA_PWR_S	19
 
 /*
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 34e13c7..62954fc 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -25,6 +25,8 @@
   Reset functions and helpers
 \*****************************/
 
+#include <asm/unaligned.h>
+
 #include <linux/pci.h> 		/* To determine if a card is pci-e */
 #include <linux/log2.h>
 #include "ath5k.h"
@@ -870,6 +872,7 @@
 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	struct ieee80211_channel *channel, bool change_channel)
 {
+	struct ath_common *common = ath5k_hw_common(ah);
 	u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
 	u32 phy_tst1;
 	u8 mode, freq, ee_mode, ant[2];
@@ -1171,10 +1174,12 @@
 	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
 
 	/* Restore sta_id flags and preserve our mac address*/
-	ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
-						AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
-						AR5K_STA_ID1);
+	ath5k_hw_reg_write(ah,
+			   get_unaligned_le32(common->macaddr),
+			   AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah,
+			   staid1_flags | get_unaligned_le16(common->macaddr + 4),
+			   AR5K_STA_ID1);
 
 
 	/*
@@ -1182,8 +1187,7 @@
 	 */
 
 	/* Restore bssid and bssid mask */
-	/* XXX: add ah->aid once mac80211 gives this to us */
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+	ath5k_hw_set_associd(ah);
 
 	/* Set PCU config */
 	ath5k_hw_set_opmode(ah);
@@ -1289,7 +1293,7 @@
 	 * out and/or noise floor calibration might timeout.
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL);
+				AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF);
 
 	/* At the same time start I/Q calibration for QAM constellation
 	 * -no need for CCK- */
@@ -1310,21 +1314,6 @@
 			channel->center_freq);
 	}
 
-	/*
-	 * If we run NF calibration before AGC, it always times out.
-	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. Also if AGC or NF cal.
-	 * times out, reset doesn't fail on binary HAL. I believe
-	 * that's wrong because since rx path is routed to a detector,
-	 * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
-	 * enables noise floor calibration after offset calibration and if noise
-	 * floor calibration fails, reset fails. I believe that's
-	 * a better approach, we just need to find a polling interval
-	 * that suits best, even if reset continues we need to make
-	 * sure that rx path is ready.
-	 */
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
-
 	/* Restore antenna mode */
 	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index ef5f59c..03a1106 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -1,9 +1,16 @@
+config ATH9K_HW
+	tristate
+config ATH9K_COMMON
+	tristate
+
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
-	depends on PCI && MAC80211 && WLAN_80211
+	depends on PCI && MAC80211
+	select ATH9K_HW
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
+	select ATH9K_COMMON
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
@@ -16,13 +23,12 @@
 
 	  If you choose to build a module, it'll be called ath9k.
 
-config ATH9K_DEBUG
+config ATH9K_DEBUGFS
 	bool "Atheros ath9k debugging"
 	depends on ATH9K
 	---help---
-	  Say Y, if you need ath9k to display debug messages.
-	  Pass the debug mask as a module parameter:
+	  Say Y, if you need access to ath9k's statistics for
+	  interrupts, rate control, etc.
 
-	  modprobe ath9k debug=0x00000200
+	  Also required for changing debug message flags at run time.
 
-	  Look in ath9k/debug.h for possible debug masks
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index ff2c9a2..4985b2b 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,22 +1,28 @@
-ath9k-y +=	hw.o \
-		eeprom.o \
-		eeprom_def.o \
-		eeprom_4k.o \
-		eeprom_9287.o \
-		mac.o \
-		calib.o \
-		ani.o \
-		phy.o \
-		beacon.o \
+ath9k-y +=	beacon.o \
 		main.o \
 		recv.o \
 		xmit.o \
 		virtual.o \
-		rc.o \
-		btcoex.o
+		rc.o
 
 ath9k-$(CONFIG_PCI) += pci.o
 ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
-ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o
+ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
 
 obj-$(CONFIG_ATH9K) += ath9k.o
+
+ath9k_hw-y:=	hw.o \
+		eeprom.o \
+		eeprom_def.o \
+		eeprom_4k.o \
+		eeprom_9287.o \
+		calib.o \
+		ani.o \
+		phy.o \
+		btcoex.o \
+		mac.o \
+
+obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
+
+obj-$(CONFIG_ATH9K_COMMON) += ath9k_common.o
+ath9k_common-y:=	common.o
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 2ad7d02..329e6bc 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -22,27 +22,29 @@
 #include "ath9k.h"
 
 /* return bus cachesize in 4B word units */
-static void ath_ahb_read_cachesize(struct ath_softc *sc, int *csz)
+static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
 {
 	*csz = L1_CACHE_BYTES >> 2;
 }
 
-static void ath_ahb_cleanup(struct ath_softc *sc)
+static void ath_ahb_cleanup(struct ath_common *common)
 {
+	struct ath_softc *sc = (struct ath_softc *)common->priv;
 	iounmap(sc->mem);
 }
 
-static bool ath_ahb_eeprom_read(struct ath_hw *ah, u32 off, u16 *data)
+static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath_softc *sc = ah->ah_sc;
+	struct ath_softc *sc = (struct ath_softc *)common->priv;
 	struct platform_device *pdev = to_platform_device(sc->dev);
 	struct ath9k_platform_data *pdata;
 
 	pdata = (struct ath9k_platform_data *) pdev->dev.platform_data;
 	if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"%s: flash read failed, offset %08x is out of range\n",
-				__func__, off);
+		ath_print(common, ATH_DBG_FATAL,
+			  "%s: flash read failed, offset %08x "
+			  "is out of range\n",
+			  __func__, off);
 		return false;
 	}
 
@@ -67,6 +69,7 @@
 	int irq;
 	int ret = 0;
 	struct ath_hw *ah;
+	char hw_name[64];
 
 	if (!pdev->dev.platform_data) {
 		dev_err(&pdev->dev, "no platform data specified\n");
@@ -116,10 +119,9 @@
 	sc->hw = hw;
 	sc->dev = &pdev->dev;
 	sc->mem = mem;
-	sc->bus_ops = &ath_ahb_bus_ops;
 	sc->irq = irq;
 
-	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0);
+	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0, &ath_ahb_bus_ops);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto err_free_hw;
@@ -132,14 +134,11 @@
 	}
 
 	ah = sc->sc_ah;
+	ath9k_hw_name(ah, hw_name, sizeof(hw_name));
 	printk(KERN_INFO
-	       "%s: Atheros AR%s MAC/BB Rev:%x, "
-	       "AR%s RF Rev:%x, mem=0x%lx, irq=%d\n",
+	       "%s: %s mem=0x%lx, irq=%d\n",
 	       wiphy_name(hw->wiphy),
-	       ath_mac_bb_name(ah->hw_version.macVersion),
-	       ah->hw_version.macRev,
-	       ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)),
-	       ah->hw_version.phyRev,
+	       hw_name,
 	       (unsigned long)mem, irq);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 2b49374..2a0cd64 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_get_ani_channel_idx(struct ath_hw *ah,
 					struct ath9k_channel *chan)
@@ -31,8 +31,8 @@
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"No more channel states left. Using channel 0\n");
+	ath_print(ath9k_hw_common(ah), ATH_DBG_ANI,
+		  "No more channel states left. Using channel 0\n");
 
 	return 0;
 }
@@ -41,16 +41,17 @@
 				 enum ath9k_ani_cmd cmd, int param)
 {
 	struct ar5416AniState *aniState = ah->curani;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	switch (cmd & ah->ani_function) {
 	case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"level out of range (%u > %u)\n",
-				level,
-				(unsigned)ARRAY_SIZE(ah->totalSizeDesired));
+			ath_print(common, ATH_DBG_ANI,
+				  "level out of range (%u > %u)\n",
+				  level,
+				  (unsigned)ARRAY_SIZE(ah->totalSizeDesired));
 			return false;
 		}
 
@@ -152,10 +153,10 @@
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(firstep)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"level out of range (%u > %u)\n",
-				level,
-				(unsigned) ARRAY_SIZE(firstep));
+			ath_print(common, ATH_DBG_ANI,
+				  "level out of range (%u > %u)\n",
+				  level,
+				  (unsigned) ARRAY_SIZE(firstep));
 			return false;
 		}
 		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
@@ -174,11 +175,10 @@
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(cycpwrThr1)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"level out of range (%u > %u)\n",
-				level,
-				(unsigned)
-				ARRAY_SIZE(cycpwrThr1));
+			ath_print(common, ATH_DBG_ANI,
+				  "level out of range (%u > %u)\n",
+				  level,
+				  (unsigned) ARRAY_SIZE(cycpwrThr1));
 			return false;
 		}
 		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
@@ -194,25 +194,28 @@
 	case ATH9K_ANI_PRESENT:
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"invalid cmd %u\n", cmd);
+		ath_print(common, ATH_DBG_ANI,
+			  "invalid cmd %u\n", cmd);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "ANI parameters:\n");
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"noiseImmunityLevel=%d, spurImmunityLevel=%d, "
-		"ofdmWeakSigDetectOff=%d\n",
-		aniState->noiseImmunityLevel, aniState->spurImmunityLevel,
-		!aniState->ofdmWeakSigDetectOff);
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"cckWeakSigThreshold=%d, "
-		"firstepLevel=%d, listenTime=%d\n",
-		aniState->cckWeakSigThreshold, aniState->firstepLevel,
-		aniState->listenTime);
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+	ath_print(common, ATH_DBG_ANI, "ANI parameters:\n");
+	ath_print(common, ATH_DBG_ANI,
+		  "noiseImmunityLevel=%d, spurImmunityLevel=%d, "
+		  "ofdmWeakSigDetectOff=%d\n",
+		  aniState->noiseImmunityLevel,
+		  aniState->spurImmunityLevel,
+		  !aniState->ofdmWeakSigDetectOff);
+	ath_print(common, ATH_DBG_ANI,
+		  "cckWeakSigThreshold=%d, "
+		  "firstepLevel=%d, listenTime=%d\n",
+		  aniState->cckWeakSigThreshold,
+		  aniState->firstepLevel,
+		  aniState->listenTime);
+	ath_print(common, ATH_DBG_ANI,
 		"cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
-		aniState->cycleCount, aniState->ofdmPhyErrCount,
+		aniState->cycleCount,
+		aniState->ofdmPhyErrCount,
 		aniState->cckPhyErrCount);
 
 	return true;
@@ -231,6 +234,7 @@
 static void ath9k_ani_restart(struct ath_hw *ah)
 {
 	struct ar5416AniState *aniState;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (!DO_ANI(ah))
 		return;
@@ -240,24 +244,24 @@
 
 	if (aniState->ofdmTrigHigh > AR_PHY_COUNTMAX) {
 		aniState->ofdmPhyErrBase = 0;
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"OFDM Trigger is too high for hw counters\n");
+		ath_print(common, ATH_DBG_ANI,
+			  "OFDM Trigger is too high for hw counters\n");
 	} else {
 		aniState->ofdmPhyErrBase =
 			AR_PHY_COUNTMAX - aniState->ofdmTrigHigh;
 	}
 	if (aniState->cckTrigHigh > AR_PHY_COUNTMAX) {
 		aniState->cckPhyErrBase = 0;
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"CCK Trigger is too high for hw counters\n");
+		ath_print(common, ATH_DBG_ANI,
+			  "CCK Trigger is too high for hw counters\n");
 	} else {
 		aniState->cckPhyErrBase =
 			AR_PHY_COUNTMAX - aniState->cckTrigHigh;
 	}
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Writing ofdmbase=%u   cckbase=%u\n",
-		aniState->ofdmPhyErrBase,
-		aniState->cckPhyErrBase);
+	ath_print(common, ATH_DBG_ANI,
+		  "Writing ofdmbase=%u   cckbase=%u\n",
+		  aniState->ofdmPhyErrBase,
+		  aniState->cckPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_1, aniState->ofdmPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_2, aniState->cckPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
@@ -271,7 +275,7 @@
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	struct ar5416AniState *aniState;
 	int32_t rssi;
 
@@ -343,7 +347,7 @@
 
 static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	struct ar5416AniState *aniState;
 	int32_t rssi;
 
@@ -464,6 +468,7 @@
 {
 	struct ar5416AniState *aniState;
 	struct ath9k_channel *chan = ah->curchan;
+	struct ath_common *common = ath9k_hw_common(ah);
 	int index;
 
 	if (!DO_ANI(ah))
@@ -475,8 +480,8 @@
 
 	if (DO_ANI(ah) && ah->opmode != NL80211_IFTYPE_STATION
 	    && ah->opmode != NL80211_IFTYPE_ADHOC) {
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"Reset ANI state opmode %u\n", ah->opmode);
+		ath_print(common, ATH_DBG_ANI,
+			  "Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
 		if (ah->opmode == NL80211_IFTYPE_AP) {
@@ -543,6 +548,7 @@
 			  struct ath9k_channel *chan)
 {
 	struct ar5416AniState *aniState;
+	struct ath_common *common = ath9k_hw_common(ah);
 	int32_t listenTime;
 	u32 phyCnt1, phyCnt2;
 	u32 ofdmPhyErrCnt, cckPhyErrCnt;
@@ -569,20 +575,22 @@
 	if (phyCnt1 < aniState->ofdmPhyErrBase ||
 	    phyCnt2 < aniState->cckPhyErrBase) {
 		if (phyCnt1 < aniState->ofdmPhyErrBase) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"phyCnt1 0x%x, resetting "
-				"counter value to 0x%x\n",
-				phyCnt1, aniState->ofdmPhyErrBase);
+			ath_print(common, ATH_DBG_ANI,
+				  "phyCnt1 0x%x, resetting "
+				  "counter value to 0x%x\n",
+				  phyCnt1,
+				  aniState->ofdmPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_1,
 				  aniState->ofdmPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_MASK_1,
 				  AR_PHY_ERR_OFDM_TIMING);
 		}
 		if (phyCnt2 < aniState->cckPhyErrBase) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"phyCnt2 0x%x, resetting "
-				"counter value to 0x%x\n",
-				phyCnt2, aniState->cckPhyErrBase);
+			ath_print(common, ATH_DBG_ANI,
+				  "phyCnt2 0x%x, resetting "
+				  "counter value to 0x%x\n",
+				  phyCnt2,
+				  aniState->cckPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_2,
 				  aniState->cckPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_MASK_2,
@@ -621,10 +629,13 @@
 		}
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_ani_monitor);
 
 void ath9k_enable_mib_counters(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Enable MIB counters\n");
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_print(common, ATH_DBG_ANI, "Enable MIB counters\n");
 
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
 
@@ -640,7 +651,10 @@
 /* Freeze the MIB counters, get the stats and then clear them */
 void ath9k_hw_disable_mib_counters(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disable MIB counters\n");
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_print(common, ATH_DBG_ANI, "Disable MIB counters\n");
+
 	REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC);
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
 	REG_WRITE(ah, AR_MIBC, AR_MIBC_CMC);
@@ -653,6 +667,7 @@
 				  u32 *rxf_pcnt,
 				  u32 *txf_pcnt)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	static u32 cycles, rx_clear, rx_frame, tx_frame;
 	u32 good = 1;
 
@@ -662,8 +677,8 @@
 	u32 cc = REG_READ(ah, AR_CCCNT);
 
 	if (cycles == 0 || cycles > cc) {
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"cycle counter wrap. ExtBusy = 0\n");
+		ath_print(common, ATH_DBG_ANI,
+			  "cycle counter wrap. ExtBusy = 0\n");
 		good = 0;
 	} else {
 		u32 cc_d = cc - cycles;
@@ -742,6 +757,7 @@
 		ath9k_ani_restart(ah);
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_procmibevent);
 
 void ath9k_hw_ani_setup(struct ath_hw *ah)
 {
@@ -762,9 +778,10 @@
 
 void ath9k_hw_ani_init(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int i;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Initialize ANI\n");
+	ath_print(common, ATH_DBG_ANI, "Initialize ANI\n");
 
 	memset(ah->ani, 0, sizeof(ah->ani));
 	for (i = 0; i < ARRAY_SIZE(ah->ani); i++) {
@@ -786,11 +803,11 @@
 			AR_PHY_COUNTMAX - ATH9K_ANI_CCK_TRIG_HIGH;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Setting OfdmErrBase = 0x%08x\n",
-		ah->ani[0].ofdmPhyErrBase);
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
-		ah->ani[0].cckPhyErrBase);
+	ath_print(common, ATH_DBG_ANI,
+		  "Setting OfdmErrBase = 0x%08x\n",
+		  ah->ani[0].ofdmPhyErrBase);
+	ath_print(common, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
+		  ah->ani[0].cckPhyErrBase);
 
 	REG_WRITE(ah, AR_PHY_ERR_1, ah->ani[0].ofdmPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_2, ah->ani[0].cckPhyErrBase);
@@ -803,7 +820,7 @@
 
 void ath9k_hw_ani_disable(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disabling ANI\n");
+	ath_print(ath9k_hw_common(ah), ATH_DBG_ANI, "Disabling ANI\n");
 
 	ath9k_hw_disable_mib_counters(ah);
 	REG_WRITE(ah, AR_PHY_ERR_1, 0);
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1d59f10..e2cef2f 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -19,14 +19,15 @@
 
 #include <linux/etherdevice.h>
 #include <linux/device.h>
-#include <net/mac80211.h>
 #include <linux/leds.h>
 
-#include "hw.h"
-#include "rc.h"
 #include "debug.h"
-#include "../ath.h"
-#include "btcoex.h"
+#include "common.h"
+
+/*
+ * Header for the ath9k.ko driver core *only* -- hw code nor any other driver
+ * should rely on this file or its contents.
+ */
 
 struct ath_node;
 
@@ -54,15 +55,11 @@
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
-#define ASSERT(exp) BUG_ON(!(exp))
-
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
 #define	ATH_TXQ_SETUP(sc, i)        ((sc)->tx.txqsetup & (1<<i))
 
-static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
 struct ath_config {
 	u32 ath_aggr_prot;
 	u16 txpowlimit;
@@ -103,18 +100,6 @@
 	BUF_XRETRY		= BIT(5),
 };
 
-struct ath_buf_state {
-	int bfs_nframes;
-	u16 bfs_al;
-	u16 bfs_frmlen;
-	int bfs_seqno;
-	int bfs_tidno;
-	int bfs_retries;
-	u8 bf_type;
-	u32 bfs_keyix;
-	enum ath9k_key_type bfs_keytype;
-};
-
 #define bf_nframes      	bf_state.bfs_nframes
 #define bf_al           	bf_state.bfs_al
 #define bf_frmlen       	bf_state.bfs_frmlen
@@ -129,21 +114,6 @@
 #define bf_isretried(bf)	(bf->bf_state.bf_type & BUF_RETRY)
 #define bf_isxretried(bf)	(bf->bf_state.bf_type & BUF_XRETRY)
 
-struct ath_buf {
-	struct list_head list;
-	struct ath_buf *bf_lastbf;	/* last buf of this unit (a frame or
-					   an aggregate) */
-	struct ath_buf *bf_next;	/* next subframe in the aggregate */
-	struct sk_buff *bf_mpdu;	/* enclosing frame structure */
-	struct ath_desc *bf_desc;	/* virtual addr of desc */
-	dma_addr_t bf_daddr;		/* physical addr of desc */
-	dma_addr_t bf_buf_addr;		/* physical addr of data buffer */
-	bool bf_stale;
-	u16 bf_flags;
-	struct ath_buf_state bf_state;
-	dma_addr_t bf_dmacontext;
-};
-
 struct ath_descdma {
 	struct ath_desc *dd_desc;
 	dma_addr_t dd_desc_paddr;
@@ -163,13 +133,9 @@
 
 #define ATH_MAX_ANTENNA         3
 #define ATH_RXBUF               512
-#define WME_NUM_TID             16
 #define ATH_TXBUF               512
 #define ATH_TXMAXTRY            13
 #define ATH_MGT_TXMAXTRY        4
-#define WME_BA_BMP_SIZE         64
-#define WME_MAX_BA              WME_BA_BMP_SIZE
-#define ATH_TID_MAX_BUFS        (2 * WME_MAX_BA)
 
 #define TID_TO_WME_AC(_tid)				\
 	((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE :	\
@@ -177,12 +143,6 @@
 	 (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI :	\
 	 WME_AC_VO)
 
-#define WME_AC_BE   0
-#define WME_AC_BK   1
-#define WME_AC_VI   2
-#define WME_AC_VO   3
-#define WME_NUM_AC  4
-
 #define ADDBA_EXCHANGE_ATTEMPTS    10
 #define ATH_AGGR_DELIM_SZ          4
 #define ATH_AGGR_MINPLEN           256 /* in bytes, minimum packet length */
@@ -191,7 +151,6 @@
 /* minimum h/w qdepth to be sustained to maximize aggregation */
 #define ATH_AGGR_MIN_QDEPTH        2
 #define ATH_AMPDU_SUBFRAME_DEFAULT 32
-#define ATH_AMPDU_LIMIT_MAX        (64 * 1024 - 1)
 
 #define IEEE80211_SEQ_SEQ_SHIFT    4
 #define IEEE80211_SEQ_MAX          4096
@@ -238,18 +197,8 @@
 	struct list_head axq_q;
 	spinlock_t axq_lock;
 	u32 axq_depth;
-	u8 axq_aggr_depth;
 	bool stopped;
 	bool axq_tx_inprogress;
-	struct ath_buf *axq_linkbuf;
-
-	/* first desc of the last descriptor that contains CTS */
-	struct ath_desc *axq_lastdsWithCTS;
-
-	/* final desc of the gating desc that determines whether
-	   lastdsWithCTS has been DMA'ed or not */
-	struct ath_desc *axq_gatingds;
-
 	struct list_head axq_acq;
 };
 
@@ -257,30 +206,6 @@
 #define AGGR_ADDBA_COMPLETE  BIT(2)
 #define AGGR_ADDBA_PROGRESS  BIT(3)
 
-struct ath_atx_tid {
-	struct list_head list;
-	struct list_head buf_q;
-	struct ath_node *an;
-	struct ath_atx_ac *ac;
-	struct ath_buf *tx_buf[ATH_TID_MAX_BUFS];
-	u16 seq_start;
-	u16 seq_next;
-	u16 baw_size;
-	int tidno;
-	int baw_head;	/* first un-acked tx buffer */
-	int baw_tail;	/* next unused tx buffer slot */
-	int sched;
-	int paused;
-	u8 state;
-};
-
-struct ath_atx_ac {
-	int sched;
-	int qnum;
-	struct list_head list;
-	struct list_head tid_q;
-};
-
 struct ath_tx_control {
 	struct ath_txq *txq;
 	int if_id;
@@ -291,30 +216,6 @@
 #define ATH_TX_XRETRY       0x02
 #define ATH_TX_BAR          0x04
 
-#define ATH_RSSI_LPF_LEN 		10
-#define RSSI_LPF_THRESHOLD		-20
-#define ATH9K_RSSI_BAD			0x80
-#define ATH_RSSI_EP_MULTIPLIER     (1<<7)
-#define ATH_EP_MUL(x, mul)         ((x) * (mul))
-#define ATH_RSSI_IN(x)             (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
-#define ATH_LPF_RSSI(x, y, len) \
-    ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
-#define ATH_RSSI_LPF(x, y) do {                     			\
-    if ((y) >= RSSI_LPF_THRESHOLD)                         		\
-	x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN);  	\
-} while (0)
-#define ATH_EP_RND(x, mul) 						\
-	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
-
-struct ath_node {
-	struct ath_softc *an_sc;
-	struct ath_atx_tid tid[WME_NUM_TID];
-	struct ath_atx_ac ac[WME_NUM_AC];
-	u16 maxampdu;
-	u8 mpdudensity;
-	int last_rssi;
-};
-
 struct ath_tx {
 	u16 seq_no;
 	u32 txqsetup;
@@ -329,7 +230,6 @@
 	u8 defant;
 	u8 rxotherant;
 	u32 *rxlink;
-	int bufsize;
 	unsigned int rxfilter;
 	spinlock_t rxflushlock;
 	spinlock_t rxbuflock;
@@ -427,9 +327,9 @@
 
 void ath_beacon_tasklet(unsigned long data);
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif);
-int ath_beaconq_setup(struct ath_hw *ah);
 int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif);
 void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp);
+int ath_beaconq_config(struct ath_softc *sc);
 
 /*******/
 /* ANI */
@@ -441,14 +341,24 @@
 #define ATH_LONG_CALINTERVAL      30000   /* 30 seconds */
 #define ATH_RESTART_CALINTERVAL   1200000 /* 20 minutes */
 
-struct ath_ani {
-	bool caldone;
-	int16_t noise_floor;
-	unsigned int longcal_timer;
-	unsigned int shortcal_timer;
-	unsigned int resetcal_timer;
-	unsigned int checkani_timer;
-	struct timer_list timer;
+/* Defines the BT AR_BT_COEX_WGHT used */
+enum ath_stomp_type {
+	ATH_BTCOEX_NO_STOMP,
+	ATH_BTCOEX_STOMP_ALL,
+	ATH_BTCOEX_STOMP_LOW,
+	ATH_BTCOEX_STOMP_NONE
+};
+
+struct ath_btcoex {
+	bool hw_timer_enabled;
+	spinlock_t btcoex_lock;
+	struct timer_list period_timer; /* Timer for BT period */
+	u32 bt_priority_cnt;
+	unsigned long bt_priority_time;
+	int bt_stomp_type; /* Types of BT stomping */
+	u32 btcoex_no_stomp; /* in usec */
+	u32 btcoex_period; /* in usec */
+	struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
 };
 
 /********************/
@@ -484,25 +394,13 @@
  * Used when PCI device not fully initialized by bootrom/BIOS
 */
 #define DEFAULT_CACHELINE       32
-#define	ATH_DEFAULT_NOISE_FLOOR -95
 #define ATH_REGCLASSIDS_MAX     10
 #define ATH_CABQ_READY_TIME     80      /* % of beacon interval */
 #define ATH_MAX_SW_RETRIES      10
 #define ATH_CHAN_MAX            255
 #define IEEE80211_WEP_NKID      4       /* number of key ids */
 
-/*
- * The key cache is used for h/w cipher state and also for
- * tracking station state such as the current tx antenna.
- * We also setup a mapping table between key cache slot indices
- * and station state to short-circuit node lookups on rx.
- * Different parts have different size key caches.  We handle
- * up to ATH_KEYMAX entries (could dynamically allocate state).
- */
-#define	ATH_KEYMAX	        128     /* max key cache size we handle */
-
 #define ATH_TXPOWER_MAX         100     /* .5 dBm units */
-#define ATH_RSSI_DUMMY_MARKER   0x127
 #define ATH_RATE_DUMMY_MARKER   0
 
 #define SC_OP_INVALID           BIT(0)
@@ -522,23 +420,17 @@
 #define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
 #define SC_OP_WAIT_FOR_TX_ACK   BIT(18)
 #define SC_OP_BEACON_SYNC       BIT(19)
-#define SC_OP_BTCOEX_ENABLED    BIT(20)
 #define SC_OP_BT_PRIORITY_DETECTED BIT(21)
-
-struct ath_bus_ops {
-	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
-	void		(*cleanup)(struct ath_softc *sc);
-	bool		(*eeprom_read)(struct ath_hw *ah, u32 off, u16 *data);
-};
+#define SC_OP_NULLFUNC_COMPLETED BIT(22)
+#define SC_OP_PS_ENABLED	BIT(23)
 
 struct ath_wiphy;
+struct ath_rate_table;
 
 struct ath_softc {
 	struct ieee80211_hw *hw;
 	struct device *dev;
 
-	struct ath_common common;
-
 	spinlock_t wiphy_lock; /* spinlock to protect ath_wiphy data */
 	struct ath_wiphy *pri_wiphy;
 	struct ath_wiphy **sec_wiphy; /* secondary wiphys (virtual radios); may
@@ -565,32 +457,21 @@
 	spinlock_t sc_pm_lock;
 	struct mutex mutex;
 
-	u8 curbssid[ETH_ALEN];
-	u8 bssidmask[ETH_ALEN];
 	u32 intrstatus;
 	u32 sc_flags; /* SC_OP_* */
 	u16 curtxpow;
-	u16 curaid;
 	u8 nbcnvifs;
 	u16 nvifs;
-	u8 tx_chainmask;
-	u8 rx_chainmask;
-	u32 keymax;
-	DECLARE_BITMAP(keymap, ATH_KEYMAX);
-	u8 splitmic;
 	bool ps_enabled;
 	unsigned long ps_usecount;
 	enum ath9k_int imask;
-	enum ath9k_ht_extprotspacing ht_extprotspacing;
-	enum ath9k_ht_macmode tx_chan_width;
 
 	struct ath_config config;
 	struct ath_rx rx;
 	struct ath_tx tx;
 	struct ath_beacon beacon;
-	struct ieee80211_rate rates[IEEE80211_NUM_BANDS][ATH_RATE_MAX];
-	const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX];
 	const struct ath_rate_table *cur_rate_table;
+	enum wireless_mode cur_rate_mode;
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 
 	struct ath_led radio_led;
@@ -605,14 +486,12 @@
 
 	int beacon_interval;
 
-	struct ath_ani ani;
-#ifdef CONFIG_ATH9K_DEBUG
+#ifdef CONFIG_ATH9K_DEBUGFS
 	struct ath9k_debug debug;
 #endif
-	struct ath_bus_ops *bus_ops;
 	struct ath_beacon_config cur_beacon_conf;
 	struct delayed_work tx_complete_work;
-	struct ath_btcoex_info btcoex_info;
+	struct ath_btcoex btcoex;
 };
 
 struct ath_wiphy {
@@ -625,6 +504,7 @@
 		ATH_WIPHY_PAUSED,
 		ATH_WIPHY_SCAN,
 	} state;
+	bool idle;
 	int chan_idx;
 	int chan_is_ht;
 };
@@ -634,31 +514,22 @@
 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
 int ath_cabq_update(struct ath_softc *);
 
-static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
+static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 {
-	return &ah->ah_sc->common;
+	common->bus_ops->read_cachesize(common, csz);
 }
 
-static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
+static inline void ath_bus_cleanup(struct ath_common *common)
 {
-	return &(ath9k_hw_common(ah)->regulatory);
-}
-
-static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
-{
-	sc->bus_ops->read_cachesize(sc, csz);
-}
-
-static inline void ath_bus_cleanup(struct ath_softc *sc)
-{
-	sc->bus_ops->cleanup(sc);
+	common->bus_ops->cleanup(common);
 }
 
 extern struct ieee80211_ops ath9k_ops;
 
 irqreturn_t ath_isr(int irq, void *dev);
 void ath_cleanup(struct ath_softc *sc);
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid);
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+		    const struct ath_bus_ops *bus_ops);
 void ath_detach(struct ath_softc *sc);
 const char *ath_mac_bb_name(u32 mac_bb_version);
 const char *ath_rf_name(u16 rf_version);
@@ -668,8 +539,9 @@
 void ath_update_chainmask(struct ath_softc *sc, int is_ht);
 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 		    struct ath9k_channel *hchan);
-void ath_radio_enable(struct ath_softc *sc);
-void ath_radio_disable(struct ath_softc *sc);
+
+void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw);
+void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw);
 
 #ifdef CONFIG_PCI
 int ath_pci_init(void);
@@ -705,9 +577,10 @@
 bool ath9k_wiphy_scanning(struct ath_softc *sc);
 void ath9k_wiphy_work(struct work_struct *work);
 bool ath9k_all_wiphys_idle(struct ath_softc *sc);
+void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle);
 
-void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
-unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
+void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue);
+void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue);
 
 int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
 #endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 45c4ea5..1660ef1 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -23,10 +23,12 @@
  *  the operating mode of the station (AP or AdHoc).  Parameters are AIFS
  *  settings and channel width min/max
 */
-static int ath_beaconq_config(struct ath_softc *sc)
+int ath_beaconq_config(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	struct ath9k_tx_queue_info qi;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath9k_tx_queue_info qi, qi_be;
+	int qnum;
 
 	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
@@ -36,14 +38,17 @@
 		qi.tqi_cwmax = 0;
 	} else {
 		/* Adhoc mode; important thing is to use 2x cwmin. */
-		qi.tqi_aifs = sc->beacon.beacon_qi.tqi_aifs;
-		qi.tqi_cwmin = 2*sc->beacon.beacon_qi.tqi_cwmin;
-		qi.tqi_cwmax = sc->beacon.beacon_qi.tqi_cwmax;
+		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA,
+				       ATH9K_WME_AC_BE);
+		ath9k_hw_get_txq_props(ah, qnum, &qi_be);
+		qi.tqi_aifs = qi_be.tqi_aifs;
+		qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
+		qi.tqi_cwmax = qi_be.tqi_cwmax;
 	}
 
 	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to update h/w beacon queue parameters\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to update h/w beacon queue parameters\n");
 		return 0;
 	} else {
 		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
@@ -61,11 +66,12 @@
 {
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_desc *ds;
 	struct ath9k_11n_rate_series series[4];
-	const struct ath_rate_table *rt;
 	int flags, antenna, ctsrate = 0, ctsduration = 0;
-	u8 rate;
+	struct ieee80211_supported_band *sband;
+	u8 rate = 0;
 
 	ds = bf->bf_desc;
 	flags = ATH9K_TXDESC_NOACK;
@@ -89,10 +95,10 @@
 
 	ds->ds_data = bf->bf_buf_addr;
 
-	rt = sc->cur_rate_table;
-	rate = rt->info[0].ratecode;
+	sband = &sc->sbands[common->hw->conf.channel->band];
+	rate = sband->bitrates[0].hw_value;
 	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
-		rate |= rt->info[0].short_preamble;
+		rate |= sband->bitrates[0].hw_value_short;
 
 	ath9k_hw_set11n_txdesc(ah, ds, skb->len + FCS_LEN,
 			       ATH9K_PKT_TYPE_BEACON,
@@ -108,7 +114,7 @@
 	memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
 	series[0].Tries = 1;
 	series[0].Rate = rate;
-	series[0].ChSel = sc->tx_chainmask;
+	series[0].ChSel = common->tx_chainmask;
 	series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0;
 	ath9k_hw_set11n_ratescenario(ah, ds, ds, 0, ctsrate, ctsduration,
 				     series, 4, 0);
@@ -119,6 +125,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_buf *bf;
 	struct ath_vif *avp;
 	struct sk_buff *skb;
@@ -172,7 +179,8 @@
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
-		DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error on beaconing\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "dma_mapping_error on beaconing\n");
 		return NULL;
 	}
 
@@ -192,8 +200,8 @@
 
 	if (skb && cabq_depth) {
 		if (sc->nvifs > 1) {
-			DPRINTF(sc, ATH_DBG_BEACON,
-				"Flushing previous cabq traffic\n");
+			ath_print(common, ATH_DBG_BEACON,
+				  "Flushing previous cabq traffic\n");
 			ath_draintxq(sc, cabq, false);
 		}
 	}
@@ -216,6 +224,7 @@
 				   struct ieee80211_vif *vif)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf;
 	struct ath_vif *avp;
 	struct sk_buff *skb;
@@ -233,25 +242,14 @@
 	/* NB: caller is known to have already stopped tx dma */
 	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
 	ath9k_hw_txstart(ah, sc->beacon.beaconq);
-	DPRINTF(sc, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
-		sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
-}
-
-int ath_beaconq_setup(struct ath_hw *ah)
-{
-	struct ath9k_tx_queue_info qi;
-
-	memset(&qi, 0, sizeof(qi));
-	qi.tqi_aifs = 1;
-	qi.tqi_cwmin = 0;
-	qi.tqi_cwmax = 0;
-	/* NB: don't enable any interrupts */
-	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
+	ath_print(common, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
+		  sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
 }
 
 int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 {
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp;
 	struct ath_buf *bf;
 	struct sk_buff *skb;
@@ -309,7 +307,7 @@
 	/* NB: the beacon data buffer must be 32-bit aligned. */
 	skb = ieee80211_beacon_get(sc->hw, vif);
 	if (skb == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "cannot get skb\n");
+		ath_print(common, ATH_DBG_BEACON, "cannot get skb\n");
 		return -ENOMEM;
 	}
 
@@ -333,9 +331,10 @@
 		tsfadjust = intval * avp->av_bslot / ATH_BCBUF;
 		avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
 
-		DPRINTF(sc, ATH_DBG_BEACON,
-			"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
-			avp->av_bslot, intval, (unsigned long long)tsfadjust);
+		ath_print(common, ATH_DBG_BEACON,
+			  "stagger beacons, bslot %d intval "
+			  "%u tsfadjust %llu\n",
+			  avp->av_bslot, intval, (unsigned long long)tsfadjust);
 
 		((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
 			avp->tsf_adjust;
@@ -349,8 +348,8 @@
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"dma_mapping_error on beacon alloc\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "dma_mapping_error on beacon alloc\n");
 		return -ENOMEM;
 	}
 
@@ -386,6 +385,7 @@
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf = NULL;
 	struct ieee80211_vif *vif;
 	struct ath_wiphy *aphy;
@@ -405,12 +405,12 @@
 		sc->beacon.bmisscnt++;
 
 		if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
-			DPRINTF(sc, ATH_DBG_BEACON,
-				"missed %u consecutive beacons\n",
-				sc->beacon.bmisscnt);
+			ath_print(common, ATH_DBG_BEACON,
+				  "missed %u consecutive beacons\n",
+				  sc->beacon.bmisscnt);
 		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
-			DPRINTF(sc, ATH_DBG_BEACON,
-				"beacon is officially stuck\n");
+			ath_print(common, ATH_DBG_BEACON,
+				  "beacon is officially stuck\n");
 			sc->sc_flags |= SC_OP_TSF_RESET;
 			ath_reset(sc, false);
 		}
@@ -419,9 +419,9 @@
 	}
 
 	if (sc->beacon.bmisscnt != 0) {
-		DPRINTF(sc, ATH_DBG_BEACON,
-			"resume beacon xmit after %u misses\n",
-			sc->beacon.bmisscnt);
+		ath_print(common, ATH_DBG_BEACON,
+			  "resume beacon xmit after %u misses\n",
+			  sc->beacon.bmisscnt);
 		sc->beacon.bmisscnt = 0;
 	}
 
@@ -447,9 +447,9 @@
 	vif = sc->beacon.bslot[slot];
 	aphy = sc->beacon.bslot_aphy[slot];
 
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
-		slot, tsf, tsftu, intval, vif);
+	ath_print(common, ATH_DBG_BEACON,
+		  "slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
+		  slot, tsf, tsftu, intval, vif);
 
 	bfaddr = 0;
 	if (vif) {
@@ -490,7 +490,7 @@
 		 * are still pending on the queue.
 		 */
 		if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
-			DPRINTF(sc, ATH_DBG_FATAL,
+			ath_print(common, ATH_DBG_FATAL,
 				"beacon queue %u did not stop?\n", sc->beacon.beaconq);
 		}
 
@@ -502,6 +502,19 @@
 	}
 }
 
+static void ath9k_beacon_init(struct ath_softc *sc,
+			      u32 next_beacon,
+			      u32 beacon_period)
+{
+	if (beacon_period & ATH9K_BEACON_RESET_TSF)
+		ath9k_ps_wakeup(sc);
+
+	ath9k_hw_beaconinit(sc->sc_ah, next_beacon, beacon_period);
+
+	if (beacon_period & ATH9K_BEACON_RESET_TSF)
+		ath9k_ps_restore(sc);
+}
+
 /*
  * For multi-bss ap support beacons are either staggered evenly over N slots or
  * burst together.  For the former arrange for the SWBA to be delivered for each
@@ -534,7 +547,7 @@
 	/* Set the computed AP beacon timers */
 
 	ath9k_hw_set_interrupts(sc->sc_ah, 0);
-	ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
@@ -555,6 +568,7 @@
 static void ath_beacon_config_sta(struct ath_softc *sc,
 				  struct ath_beacon_config *conf)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_beacon_state bs;
 	int dtimperiod, dtimcount, sleepduration;
 	int cfpperiod, cfpcount;
@@ -651,11 +665,11 @@
 	/* TSF out of range threshold fixed at 1 second */
 	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
 
-	DPRINTF(sc, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
-		bs.bs_bmissthreshold, bs.bs_sleepduration,
-		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+	ath_print(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
+	ath_print(common, ATH_DBG_BEACON,
+		  "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
+		  bs.bs_bmissthreshold, bs.bs_sleepduration,
+		  bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
 
 	/* Set the computed STA beacon timers */
 
@@ -669,6 +683,7 @@
 				    struct ath_beacon_config *conf,
 				    struct ieee80211_vif *vif)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u64 tsf;
 	u32 tsftu, intval, nexttbtt;
 
@@ -689,9 +704,9 @@
 		nexttbtt += intval;
 	} while (nexttbtt < tsftu);
 
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"IBSS nexttbtt %u intval %u (%u)\n",
-		nexttbtt, intval, conf->beacon_interval);
+	ath_print(common, ATH_DBG_BEACON,
+		  "IBSS nexttbtt %u intval %u (%u)\n",
+		  nexttbtt, intval, conf->beacon_interval);
 
 	/*
 	 * In IBSS mode enable the beacon timers but only enable SWBA interrupts
@@ -707,7 +722,7 @@
 	/* Set the computed ADHOC beacon timers */
 
 	ath9k_hw_set_interrupts(sc->sc_ah, 0);
-	ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
@@ -719,6 +734,7 @@
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
 	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	enum nl80211_iftype iftype;
 
 	/* Setup the beacon configuration parameters */
@@ -759,8 +775,8 @@
 		ath_beacon_config_sta(sc, cur_conf);
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"Unsupported beaconing mode\n");
+		ath_print(common, ATH_DBG_CONFIG,
+			  "Unsupported beaconing mode\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 55f607b..fb4ac15 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -14,10 +14,26 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
-static const struct ath_btcoex_config ath_bt_config = { 0, true, true,
-			ATH_BT_COEX_MODE_SLOTTED, true, true, 2, 5, true };
+enum ath_bt_mode {
+	ATH_BT_COEX_MODE_LEGACY,        /* legacy rx_clear mode */
+	ATH_BT_COEX_MODE_UNSLOTTED,     /* untimed/unslotted mode */
+	ATH_BT_COEX_MODE_SLOTTED,       /* slotted mode */
+	ATH_BT_COEX_MODE_DISALBED,      /* coexistence disabled */
+};
+
+struct ath_btcoex_config {
+	u8 bt_time_extend;
+	bool bt_txstate_extend;
+	bool bt_txframe_extend;
+	enum ath_bt_mode bt_mode; /* coexistence mode */
+	bool bt_quiet_collision;
+	bool bt_rxclear_polarity; /* invert rx_clear as WLAN_ACTIVE*/
+	u8 bt_priority_time;
+	u8 bt_first_slot_time;
+	bool bt_hold_rx_clear;
+};
 
 static const u16 ath_subsysid_tbl[] = {
 	AR9280_COEX2WIRE_SUBSYSID,
@@ -29,141 +45,38 @@
  * Checks the subsystem id of the device to see if it
  * supports btcoex
  */
-bool ath_btcoex_supported(u16 subsysid)
+bool ath9k_hw_btcoex_supported(struct ath_hw *ah)
 {
 	int i;
 
-	if (!subsysid)
+	if (!ah->hw_version.subsysid)
 		return false;
 
 	for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++)
-		if (subsysid == ath_subsysid_tbl[i])
+		if (ah->hw_version.subsysid == ath_subsysid_tbl[i])
 			return true;
 
 	return false;
 }
 
-/*
- * Detects if there is any priority bt traffic
- */
-static void ath_detect_bt_priority(struct ath_softc *sc)
+void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
 {
-	struct ath_btcoex_info *btinfo = &sc->btcoex_info;
-
-	if (ath9k_hw_gpio_get(sc->sc_ah, btinfo->btpriority_gpio))
-		btinfo->bt_priority_cnt++;
-
-	if (time_after(jiffies, btinfo->bt_priority_time +
-			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
-		if (btinfo->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
-			DPRINTF(sc, ATH_DBG_BTCOEX,
-				"BT priority traffic detected");
-			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
-		} else {
-			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
-		}
-
-		btinfo->bt_priority_cnt = 0;
-		btinfo->bt_priority_time = jiffies;
-	}
-}
-
-/*
- * Configures appropriate weight based on stomp type.
- */
-static void ath_btcoex_bt_stomp(struct ath_softc *sc,
-				struct ath_btcoex_info *btinfo,
-				int stomp_type)
-{
-
-	switch (stomp_type) {
-	case ATH_BTCOEX_STOMP_ALL:
-		ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
-				      AR_STOMP_ALL_WLAN_WGHT);
-		break;
-	case ATH_BTCOEX_STOMP_LOW:
-		ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
-				      AR_STOMP_LOW_WLAN_WGHT);
-		break;
-	case ATH_BTCOEX_STOMP_NONE:
-		ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
-				      AR_STOMP_NONE_WLAN_WGHT);
-		break;
-	default:
-		DPRINTF(sc, ATH_DBG_BTCOEX, "Invalid Stomptype\n");
-		break;
-	}
-
-	ath9k_hw_btcoex_enable(sc->sc_ah);
-}
-
-/*
- * This is the master bt coex timer which runs for every
- * 45ms, bt traffic will be given priority during 55% of this
- * period while wlan gets remaining 45%
- */
-
-static void ath_btcoex_period_timer(unsigned long data)
-{
-	struct ath_softc *sc = (struct ath_softc *) data;
-	struct ath_btcoex_info *btinfo = &sc->btcoex_info;
-
-	ath_detect_bt_priority(sc);
-
-	spin_lock_bh(&btinfo->btcoex_lock);
-
-	ath_btcoex_bt_stomp(sc, btinfo, btinfo->bt_stomp_type);
-
-	spin_unlock_bh(&btinfo->btcoex_lock);
-
-	if (btinfo->btcoex_period != btinfo->btcoex_no_stomp) {
-		if (btinfo->hw_timer_enabled)
-			ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
-
-		ath_gen_timer_start(sc->sc_ah,
-			btinfo->no_stomp_timer,
-			(ath9k_hw_gettsf32(sc->sc_ah) +
-				btinfo->btcoex_no_stomp),
-				btinfo->btcoex_no_stomp * 10);
-		btinfo->hw_timer_enabled = true;
-	}
-
-	mod_timer(&btinfo->period_timer, jiffies +
-				  msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
-}
-
-/*
- * Generic tsf based hw timer which configures weight
- * registers to time slice between wlan and bt traffic
- */
-
-static void ath_btcoex_no_stomp_timer(void *arg)
-{
-	struct ath_softc *sc = (struct ath_softc *)arg;
-	struct ath_btcoex_info *btinfo = &sc->btcoex_info;
-
-	DPRINTF(sc, ATH_DBG_BTCOEX, "no stomp timer running \n");
-
-	spin_lock_bh(&btinfo->btcoex_lock);
-
-	if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
-		ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_NONE);
-	 else if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
-		ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_LOW);
-
-	spin_unlock_bh(&btinfo->btcoex_lock);
-}
-
-static int ath_init_btcoex_info(struct ath_hw *hw,
-				struct ath_btcoex_info *btcoex_info)
-{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+	const struct ath_btcoex_config ath_bt_config = {
+		.bt_time_extend = 0,
+		.bt_txstate_extend = true,
+		.bt_txframe_extend = true,
+		.bt_mode = ATH_BT_COEX_MODE_SLOTTED,
+		.bt_quiet_collision = true,
+		.bt_rxclear_polarity = true,
+		.bt_priority_time = 2,
+		.bt_first_slot_time = 5,
+		.bt_hold_rx_clear = true,
+	};
 	u32 i;
-	int qnum;
 
-	qnum = ath_tx_get_qnum(hw->ah_sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
-
-	btcoex_info->bt_coex_mode =
-		(btcoex_info->bt_coex_mode & AR_BT_QCU_THRESH) |
+	btcoex_hw->bt_coex_mode =
+		(btcoex_hw->bt_coex_mode & AR_BT_QCU_THRESH) |
 		SM(ath_bt_config.bt_time_extend, AR_BT_TIME_EXTEND) |
 		SM(ath_bt_config.bt_txstate_extend, AR_BT_TXSTATE_EXTEND) |
 		SM(ath_bt_config.bt_txframe_extend, AR_BT_TX_FRAME_EXTEND) |
@@ -174,167 +87,141 @@
 		SM(ath_bt_config.bt_first_slot_time, AR_BT_FIRST_SLOT_TIME) |
 		SM(qnum, AR_BT_QCU_THRESH);
 
-	btcoex_info->bt_coex_mode2 =
+	btcoex_hw->bt_coex_mode2 =
 		SM(ath_bt_config.bt_hold_rx_clear, AR_BT_HOLD_RX_CLEAR) |
 		SM(ATH_BTCOEX_BMISS_THRESH, AR_BT_BCN_MISS_THRESH) |
 		AR_BT_DISABLE_BT_ANT;
 
-	btcoex_info->bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
-
-	btcoex_info->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
-
-	btcoex_info->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
-		btcoex_info->btcoex_period / 100;
-
 	for (i = 0; i < 32; i++)
-		hw->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i;
+		ah->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i;
+}
+EXPORT_SYMBOL(ath9k_hw_init_btcoex_hw);
 
-	setup_timer(&btcoex_info->period_timer, ath_btcoex_period_timer,
-			(unsigned long) hw->ah_sc);
+void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	btcoex_info->no_stomp_timer = ath_gen_timer_alloc(hw,
-			ath_btcoex_no_stomp_timer,
-			ath_btcoex_no_stomp_timer,
-			(void *)hw->ah_sc, AR_FIRST_NDP_TIMER);
+	/* connect bt_active to baseband */
+	REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
+		     AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
 
-	if (btcoex_info->no_stomp_timer == NULL)
-		return -ENOMEM;
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
 
-	spin_lock_init(&btcoex_info->btcoex_lock);
+	/* Set input mux for bt_active to gpio pin */
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+		      AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+		      btcoex_hw->btactive_gpio);
 
-	return 0;
+	/* Configure the desired gpio port for input */
+	ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btactive_gpio);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_init_2wire);
+
+void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+
+	/* btcoex 3-wire */
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+			(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB |
+			 AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB));
+
+	/* Set input mux for bt_prority_async and
+	 *                  bt_active_async to GPIO pins */
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+			AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+			btcoex_hw->btactive_gpio);
+
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+			AR_GPIO_INPUT_MUX1_BT_PRIORITY,
+			btcoex_hw->btpriority_gpio);
+
+	/* Configure the desired GPIO ports for input */
+
+	ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btactive_gpio);
+	ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btpriority_gpio);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_init_3wire);
+
+static void ath9k_hw_btcoex_enable_2wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+
+	/* Configure the desired GPIO port for TX_FRAME output */
+	ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
+			    AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
 }
 
-int ath9k_hw_btcoex_init(struct ath_hw *ah)
+void ath9k_hw_btcoex_set_weight(struct ath_hw *ah,
+				u32 bt_weight,
+				u32 wlan_weight)
 {
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
-	int ret = 0;
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) {
-		/* connect bt_active to baseband */
-		REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-				(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
-				 AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
+	btcoex_hw->bt_coex_weights = SM(bt_weight, AR_BTCOEX_BT_WGHT) |
+				     SM(wlan_weight, AR_BTCOEX_WL_WGHT);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_set_weight);
 
-		REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-				AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
+static void ath9k_hw_btcoex_enable_3wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-		/* Set input mux for bt_active to gpio pin */
-		REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-				AR_GPIO_INPUT_MUX1_BT_ACTIVE,
-				btcoex_info->btactive_gpio);
+	/*
+	 * Program coex mode and weight registers to
+	 * enable coex 3-wire
+	 */
+	REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_hw->bt_coex_mode);
+	REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_hw->bt_coex_weights);
+	REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_hw->bt_coex_mode2);
 
-		/* Configure the desired gpio port for input */
-		ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio);
-	} else {
-		/* btcoex 3-wire */
-		REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-				(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB |
-				 AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB));
+	REG_RMW_FIELD(ah, AR_QUIET1, AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
+	REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
 
-		/* Set input mux for bt_prority_async and
-		 *                  bt_active_async to GPIO pins */
-		REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-				AR_GPIO_INPUT_MUX1_BT_ACTIVE,
-				btcoex_info->btactive_gpio);
-
-		REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-				AR_GPIO_INPUT_MUX1_BT_PRIORITY,
-				btcoex_info->btpriority_gpio);
-
-		/* Configure the desired GPIO ports for input */
-
-		ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio);
-		ath9k_hw_cfg_gpio_input(ah, btcoex_info->btpriority_gpio);
-
-		ret = ath_init_btcoex_info(ah, btcoex_info);
-	}
-
-	return ret;
+	ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
+			    AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL);
 }
 
 void ath9k_hw_btcoex_enable(struct ath_hw *ah)
 {
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) {
-		/* Configure the desired GPIO port for TX_FRAME output */
-		ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
-				AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
-	} else {
-		/*
-		 * Program coex mode and weight registers to
-		 * enable coex 3-wire
-		 */
-		REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_info->bt_coex_mode);
-		REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_info->bt_coex_weights);
-		REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_info->bt_coex_mode2);
-
-		REG_RMW_FIELD(ah, AR_QUIET1,
-				AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
-		REG_RMW_FIELD(ah, AR_PCU_MISC,
-				AR_PCU_BT_ANT_PREVENT_RX, 0);
-
-		ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
-				AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL);
+	switch (btcoex_hw->scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_enable_2wire(ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_enable_3wire(ah);
+		break;
 	}
 
 	REG_RMW(ah, AR_GPIO_PDPU,
-		(0x2 << (btcoex_info->btactive_gpio * 2)),
-		(0x3 << (btcoex_info->btactive_gpio * 2)));
+		(0x2 << (btcoex_hw->btactive_gpio * 2)),
+		(0x3 << (btcoex_hw->btactive_gpio * 2)));
 
-	ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
+	ah->btcoex_hw.enabled = true;
 }
+EXPORT_SYMBOL(ath9k_hw_btcoex_enable);
 
 void ath9k_hw_btcoex_disable(struct ath_hw *ah)
 {
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	ath9k_hw_set_gpio(ah, btcoex_info->wlanactive_gpio, 0);
+	ath9k_hw_set_gpio(ah, btcoex_hw->wlanactive_gpio, 0);
 
-	ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
+	ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
 			AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 
-	if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_3WIRE) {
+	if (btcoex_hw->scheme == ATH_BTCOEX_CFG_3WIRE) {
 		REG_WRITE(ah, AR_BT_COEX_MODE, AR_BT_QUIET | AR_BT_MODE);
 		REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0);
 		REG_WRITE(ah, AR_BT_COEX_MODE2, 0);
 	}
 
-	ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
+	ah->btcoex_hw.enabled = false;
 }
-
-/*
- * Pause btcoex timer and bt duty cycle timer
- */
-void ath_btcoex_timer_pause(struct ath_softc *sc,
-			    struct ath_btcoex_info *btinfo)
-{
-
-	del_timer_sync(&btinfo->period_timer);
-
-	if (btinfo->hw_timer_enabled)
-		ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
-
-	btinfo->hw_timer_enabled = false;
-}
-
-/*
- * (Re)start btcoex timers
- */
-void ath_btcoex_timer_resume(struct ath_softc *sc,
-			     struct ath_btcoex_info *btinfo)
-{
-
-	DPRINTF(sc, ATH_DBG_BTCOEX, "Starting btcoex timers");
-
-	/* make sure duty cycle timer is also stopped when resuming */
-	if (btinfo->hw_timer_enabled)
-		ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
-
-	btinfo->bt_priority_cnt = 0;
-	btinfo->bt_priority_time = jiffies;
-	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
-
-	mod_timer(&btinfo->period_timer, jiffies);
-}
+EXPORT_SYMBOL(ath9k_hw_btcoex_disable);
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 297b027..1ba31a7 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -17,6 +17,8 @@
 #ifndef BTCOEX_H
 #define BTCOEX_H
 
+#include "hw.h"
+
 #define ATH_WLANACTIVE_GPIO	5
 #define ATH_BTACTIVE_GPIO	6
 #define ATH_BTPRIORITY_GPIO	7
@@ -34,67 +36,25 @@
 	ATH_BTCOEX_CFG_3WIRE,
 };
 
-enum ath_stomp_type {
-	ATH_BTCOEX_NO_STOMP,
-	ATH_BTCOEX_STOMP_ALL,
-	ATH_BTCOEX_STOMP_LOW,
-	ATH_BTCOEX_STOMP_NONE
-};
-
-enum ath_bt_mode {
-	ATH_BT_COEX_MODE_LEGACY,	/* legacy rx_clear mode */
-	ATH_BT_COEX_MODE_UNSLOTTED,	/* untimed/unslotted mode */
-	ATH_BT_COEX_MODE_SLOTTED,	/* slotted mode */
-	ATH_BT_COEX_MODE_DISALBED,	/* coexistence disabled */
-};
-
-struct ath_btcoex_config {
-	u8 bt_time_extend;
-	bool bt_txstate_extend;
-	bool bt_txframe_extend;
-	enum ath_bt_mode bt_mode; /* coexistence mode */
-	bool bt_quiet_collision;
-	bool bt_rxclear_polarity; /* invert rx_clear as WLAN_ACTIVE*/
-	u8 bt_priority_time;
-	u8 bt_first_slot_time;
-	bool bt_hold_rx_clear;
-};
-
-struct ath_btcoex_info {
-	enum ath_btcoex_scheme btcoex_scheme;
+struct ath_btcoex_hw {
+	enum ath_btcoex_scheme scheme;
+	bool enabled;
 	u8 wlanactive_gpio;
 	u8 btactive_gpio;
 	u8 btpriority_gpio;
-	u8 bt_duty_cycle; 	/* BT duty cycle in percentage */
-	int bt_stomp_type; 	/* Types of BT stomping */
 	u32 bt_coex_mode; 	/* Register setting for AR_BT_COEX_MODE */
 	u32 bt_coex_weights; 	/* Register setting for AR_BT_COEX_WEIGHT */
 	u32 bt_coex_mode2; 	/* Register setting for AR_BT_COEX_MODE2 */
-	u32 btcoex_no_stomp;   /* in usec */
-	u32 btcoex_period;     	/* in usec */
-	u32 bt_priority_cnt;
-	unsigned long bt_priority_time;
-	bool hw_timer_enabled;
-	spinlock_t btcoex_lock;
-	struct timer_list period_timer;      /* Timer for BT period */
-	struct ath_gen_timer *no_stomp_timer; /*Timer for no BT stomping*/
 };
 
-bool ath_btcoex_supported(u16 subsysid);
-int ath9k_hw_btcoex_init(struct ath_hw *ah);
+bool ath9k_hw_btcoex_supported(struct ath_hw *ah);
+void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah);
+void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah);
+void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum);
+void ath9k_hw_btcoex_set_weight(struct ath_hw *ah,
+				u32 bt_weight,
+				u32 wlan_weight);
 void ath9k_hw_btcoex_enable(struct ath_hw *ah);
 void ath9k_hw_btcoex_disable(struct ath_hw *ah);
-void ath_btcoex_timer_resume(struct ath_softc *sc,
-			     struct ath_btcoex_info *btinfo);
-void ath_btcoex_timer_pause(struct ath_softc *sc,
-			    struct ath_btcoex_info *btinfo);
-
-static inline void ath_btcoex_set_weight(struct ath_btcoex_info *btcoex_info,
-					 u32 bt_weight,
-					 u32 wlan_weight)
-{
-	btcoex_info->bt_coex_weights = SM(bt_weight, AR_BTCOEX_BT_WGHT) |
-				       SM(wlan_weight, AR_BTCOEX_WL_WGHT);
-}
 
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 0ad6d0b..238a574 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 /* We can tune this as we go by monitoring really low values */
 #define ATH9K_NF_TOO_LOW	-60
@@ -26,11 +26,11 @@
 static bool ath9k_hw_nf_in_range(struct ath_hw *ah, s16 nf)
 {
 	if (nf > ATH9K_NF_TOO_LOW) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"noise floor value detected (%d) is "
-			"lower than what we think is a "
-			"reasonable value (%d)\n",
-			nf, ATH9K_NF_TOO_LOW);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "noise floor value detected (%d) is "
+			  "lower than what we think is a "
+			  "reasonable value (%d)\n",
+			  nf, ATH9K_NF_TOO_LOW);
 		return false;
 	}
 	return true;
@@ -89,6 +89,7 @@
 static void ath9k_hw_do_getnf(struct ath_hw *ah,
 			      int16_t nfarray[NUM_NF_READINGS])
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int16_t nf;
 
 	if (AR_SREV_9280_10_OR_LATER(ah))
@@ -98,8 +99,8 @@
 
 	if (nf & 0x100)
 		nf = 0 - ((nf ^ 0x1ff) + 1);
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"NF calibrated [ctl] [chain 0] is %d\n", nf);
+	ath_print(common, ATH_DBG_CALIBRATE,
+		  "NF calibrated [ctl] [chain 0] is %d\n", nf);
 	nfarray[0] = nf;
 
 	if (!AR_SREV_9285(ah)) {
@@ -112,8 +113,8 @@
 
 		if (nf & 0x100)
 			nf = 0 - ((nf ^ 0x1ff) + 1);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ctl] [chain 1] is %d\n", nf);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "NF calibrated [ctl] [chain 1] is %d\n", nf);
 		nfarray[1] = nf;
 
 		if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
@@ -121,8 +122,8 @@
 					AR_PHY_CH2_MINCCA_PWR);
 			if (nf & 0x100)
 				nf = 0 - ((nf ^ 0x1ff) + 1);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ctl] [chain 2] is %d\n", nf);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "NF calibrated [ctl] [chain 2] is %d\n", nf);
 			nfarray[2] = nf;
 		}
 	}
@@ -136,8 +137,8 @@
 
 	if (nf & 0x100)
 		nf = 0 - ((nf ^ 0x1ff) + 1);
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"NF calibrated [ext] [chain 0] is %d\n", nf);
+	ath_print(common, ATH_DBG_CALIBRATE,
+		  "NF calibrated [ext] [chain 0] is %d\n", nf);
 	nfarray[3] = nf;
 
 	if (!AR_SREV_9285(ah)) {
@@ -150,8 +151,8 @@
 
 		if (nf & 0x100)
 			nf = 0 - ((nf ^ 0x1ff) + 1);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ext] [chain 1] is %d\n", nf);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "NF calibrated [ext] [chain 1] is %d\n", nf);
 		nfarray[4] = nf;
 
 		if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
@@ -159,8 +160,8 @@
 					AR_PHY_CH2_EXT_MINCCA_PWR);
 			if (nf & 0x100)
 				nf = 0 - ((nf ^ 0x1ff) + 1);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ext] [chain 2] is %d\n", nf);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "NF calibrated [ext] [chain 2] is %d\n", nf);
 			nfarray[5] = nf;
 		}
 	}
@@ -188,6 +189,8 @@
 static void ath9k_hw_setup_calibration(struct ath_hw *ah,
 				       struct ath9k_cal_list *currCal)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
 		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
 		      currCal->calData->calCountMax);
@@ -195,23 +198,23 @@
 	switch (currCal->calData->calType) {
 	case IQ_MISMATCH_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting IQ Mismatch Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting IQ Mismatch Calibration\n");
 		break;
 	case ADC_GAIN_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting ADC Gain Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting ADC Gain Calibration\n");
 		break;
 	case ADC_DC_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting ADC DC Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting ADC DC Calibration\n");
 		break;
 	case ADC_DC_INIT_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting Init ADC DC Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting Init ADC DC Calibration\n");
 		break;
 	}
 
@@ -278,7 +281,7 @@
 static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
 				     enum ath9k_cal_types calType)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	switch (calType & ah->supp_cals) {
 	case IQ_MISMATCH_CAL: /* Both 2 GHz and 5 GHz support OFDM */
@@ -304,11 +307,11 @@
 			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
 		ah->totalIqCorrMeas[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
-			ah->cal_samples, i, ah->totalPowerMeasI[i],
-			ah->totalPowerMeasQ[i],
-			ah->totalIqCorrMeas[i]);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+			  ah->cal_samples, i, ah->totalPowerMeasI[i],
+			  ah->totalPowerMeasQ[i],
+			  ah->totalIqCorrMeas[i]);
 	}
 }
 
@@ -326,14 +329,14 @@
 		ah->totalAdcQEvenPhase[i] +=
 			REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
-			"oddq=0x%08x; evenq=0x%08x;\n",
-			ah->cal_samples, i,
-			ah->totalAdcIOddPhase[i],
-			ah->totalAdcIEvenPhase[i],
-			ah->totalAdcQOddPhase[i],
-			ah->totalAdcQEvenPhase[i]);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			  "oddq=0x%08x; evenq=0x%08x;\n",
+			  ah->cal_samples, i,
+			  ah->totalAdcIOddPhase[i],
+			  ah->totalAdcIEvenPhase[i],
+			  ah->totalAdcQOddPhase[i],
+			  ah->totalAdcQEvenPhase[i]);
 	}
 }
 
@@ -351,19 +354,20 @@
 		ah->totalAdcDcOffsetQEvenPhase[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
-			"oddq=0x%08x; evenq=0x%08x;\n",
-			ah->cal_samples, i,
-			ah->totalAdcDcOffsetIOddPhase[i],
-			ah->totalAdcDcOffsetIEvenPhase[i],
-			ah->totalAdcDcOffsetQOddPhase[i],
-			ah->totalAdcDcOffsetQEvenPhase[i]);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			  "oddq=0x%08x; evenq=0x%08x;\n",
+			  ah->cal_samples, i,
+			  ah->totalAdcDcOffsetIOddPhase[i],
+			  ah->totalAdcDcOffsetIEvenPhase[i],
+			  ah->totalAdcDcOffsetQOddPhase[i],
+			  ah->totalAdcDcOffsetQEvenPhase[i]);
 	}
 }
 
 static void ath9k_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 powerMeasQ, powerMeasI, iqCorrMeas;
 	u32 qCoffDenom, iCoffDenom;
 	int32_t qCoff, iCoff;
@@ -374,13 +378,13 @@
 		powerMeasQ = ah->totalPowerMeasQ[i];
 		iqCorrMeas = ah->totalIqCorrMeas[i];
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Starting IQ Cal and Correction for Chain %d\n",
-			i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Starting IQ Cal and Correction for Chain %d\n",
+			  i);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Orignal: Chn %diq_corr_meas = 0x%08x\n",
-			i, ah->totalIqCorrMeas[i]);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			  i, ah->totalIqCorrMeas[i]);
 
 		iqCorrNeg = 0;
 
@@ -389,27 +393,28 @@
 			iqCorrNeg = 1;
 		}
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
-			iqCorrNeg);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
+		ath_print(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
+			  iqCorrNeg);
 
 		iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128;
 		qCoffDenom = powerMeasQ / 64;
 
-		if (powerMeasQ != 0) {
+		if ((powerMeasQ != 0) && (iCoffDenom != 0) &&
+		    (qCoffDenom != 0)) {
 			iCoff = iqCorrMeas / iCoffDenom;
 			qCoff = powerMeasI / qCoffDenom - 64;
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d iCoff = 0x%08x\n", i, iCoff);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d qCoff = 0x%08x\n", i, qCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d qCoff = 0x%08x\n", i, qCoff);
 
 			iCoff = iCoff & 0x3f;
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"New: Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "New: Chn %d iCoff = 0x%08x\n", i, iCoff);
 			if (iqCorrNeg == 0x0)
 				iCoff = 0x40 - iCoff;
 
@@ -418,9 +423,9 @@
 			else if (qCoff <= -16)
 				qCoff = 16;
 
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
-				i, iCoff, qCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
+				  i, iCoff, qCoff);
 
 			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
 				      AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF,
@@ -428,9 +433,9 @@
 			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
 				      AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF,
 				      qCoff);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"IQ Cal and Correction done for Chain %d\n",
-				i);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "IQ Cal and Correction done for Chain %d\n",
+				  i);
 		}
 	}
 
@@ -440,6 +445,7 @@
 
 static void ath9k_hw_adc_gaincal_calibrate(struct ath_hw *ah, u8 numChains)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 iOddMeasOffset, iEvenMeasOffset, qOddMeasOffset, qEvenMeasOffset;
 	u32 qGainMismatch, iGainMismatch, val, i;
 
@@ -449,21 +455,21 @@
 		qOddMeasOffset = ah->totalAdcQOddPhase[i];
 		qEvenMeasOffset = ah->totalAdcQEvenPhase[i];
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Starting ADC Gain Cal for Chain %d\n", i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Starting ADC Gain Cal for Chain %d\n", i);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_i = 0x%08x\n", i,
-			iOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_i = 0x%08x\n", i,
-			iEvenMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_q = 0x%08x\n", i,
-			qOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_q = 0x%08x\n", i,
-			qEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_i = 0x%08x\n", i,
+			  iOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_i = 0x%08x\n", i,
+			  iEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_q = 0x%08x\n", i,
+			  qOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_q = 0x%08x\n", i,
+			  qEvenMeasOffset);
 
 		if (iOddMeasOffset != 0 && qEvenMeasOffset != 0) {
 			iGainMismatch =
@@ -473,20 +479,20 @@
 				((qOddMeasOffset * 32) /
 				 qEvenMeasOffset) & 0x3f;
 
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d gain_mismatch_i = 0x%08x\n", i,
-				iGainMismatch);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d gain_mismatch_q = 0x%08x\n", i,
-				qGainMismatch);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d gain_mismatch_i = 0x%08x\n", i,
+				  iGainMismatch);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d gain_mismatch_q = 0x%08x\n", i,
+				  qGainMismatch);
 
 			val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
 			val &= 0xfffff000;
 			val |= (qGainMismatch) | (iGainMismatch << 6);
 			REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
 
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"ADC Gain Cal done for Chain %d\n", i);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "ADC Gain Cal done for Chain %d\n", i);
 		}
 	}
 
@@ -497,6 +503,7 @@
 
 static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 iOddMeasOffset, iEvenMeasOffset, val, i;
 	int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
 	const struct ath9k_percal_data *calData =
@@ -510,41 +517,41 @@
 		qOddMeasOffset = ah->totalAdcDcOffsetQOddPhase[i];
 		qEvenMeasOffset = ah->totalAdcDcOffsetQEvenPhase[i];
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Starting ADC DC Offset Cal for Chain %d\n", i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			   "Starting ADC DC Offset Cal for Chain %d\n", i);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_i = %d\n", i,
-			iOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_i = %d\n", i,
-			iEvenMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_q = %d\n", i,
-			qOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_q = %d\n", i,
-			qEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_i = %d\n", i,
+			  iOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_i = %d\n", i,
+			  iEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_q = %d\n", i,
+			  qOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_q = %d\n", i,
+			  qEvenMeasOffset);
 
 		iDcMismatch = (((iEvenMeasOffset - iOddMeasOffset) * 2) /
 			       numSamples) & 0x1ff;
 		qDcMismatch = (((qOddMeasOffset - qEvenMeasOffset) * 2) /
 			       numSamples) & 0x1ff;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
-			iDcMismatch);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
-			qDcMismatch);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
+			  iDcMismatch);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
+			  qDcMismatch);
 
 		val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
 		val &= 0xc0000fff;
 		val |= (qDcMismatch << 12) | (iDcMismatch << 21);
 		REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"ADC DC Offset Cal done for Chain %d\n", i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "ADC DC Offset Cal done for Chain %d\n", i);
 	}
 
 	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
@@ -555,7 +562,8 @@
 /* This is done for the currently configured channel */
 bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &common->hw->conf;
 	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
 	if (!ah->curchan)
@@ -568,24 +576,25 @@
 		return true;
 
 	if (currCal->calState != CAL_DONE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Calibration state incorrect, %d\n",
-			currCal->calState);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Calibration state incorrect, %d\n",
+			  currCal->calState);
 		return true;
 	}
 
 	if (!ath9k_hw_iscal_supported(ah, currCal->calData->calType))
 		return true;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"Resetting Cal %d state for channel %u\n",
-		currCal->calData->calType, conf->channel->center_freq);
+	ath_print(common, ATH_DBG_CALIBRATE,
+		  "Resetting Cal %d state for channel %u\n",
+		  currCal->calData->calType, conf->channel->center_freq);
 
 	ah->curchan->CalValid &= ~currCal->calData->calType;
 	currCal->calState = CAL_WAITING;
 
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_reset_calvalid);
 
 void ath9k_hw_start_nfcal(struct ath_hw *ah)
 {
@@ -645,11 +654,11 @@
 		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
 
-	for (j = 0; j < 1000; j++) {
+	for (j = 0; j < 5; j++) {
 		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
 		     AR_PHY_AGC_CONTROL_NF) == 0)
 			break;
-		udelay(10);
+		udelay(50);
 	}
 
 	for (i = 0; i < NUM_NF_READINGS; i++) {
@@ -665,6 +674,7 @@
 int16_t ath9k_hw_getnf(struct ath_hw *ah,
 		       struct ath9k_channel *chan)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int16_t nf, nfThresh;
 	int16_t nfarray[NUM_NF_READINGS] = { 0 };
 	struct ath9k_nfcal_hist *h;
@@ -672,8 +682,8 @@
 
 	chan->channelFlags &= (~CHANNEL_CW_INT);
 	if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"NF did not complete in calibration window\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "NF did not complete in calibration window\n");
 		nf = 0;
 		chan->rawNoiseFloor = nf;
 		return chan->rawNoiseFloor;
@@ -682,10 +692,10 @@
 		nf = nfarray[0];
 		if (getNoiseFloorThresh(ah, c->band, &nfThresh)
 		    && nf > nfThresh) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"noise floor failed detected; "
-				"detected %d, threshold %d\n",
-				nf, nfThresh);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "noise floor failed detected; "
+				  "detected %d, threshold %d\n",
+				  nf, nfThresh);
 			chan->channelFlags |= CHANNEL_CW_INT;
 		}
 	}
@@ -737,51 +747,73 @@
 
 	return nf;
 }
+EXPORT_SYMBOL(ath9k_hw_getchan_noise);
 
-static void ath9k_olc_temp_compensation(struct ath_hw *ah)
+static void ath9k_olc_temp_compensation_9287(struct ath_hw *ah)
 {
-	u32 rddata, i;
-	int delta, currPDADC, regval, slope;
+	u32 rddata;
+	int32_t delta, currPDADC, slope;
 
 	rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
 	currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
 
+	if (ah->initPDADC == 0 || currPDADC == 0) {
+		/*
+		 * Zero value indicates that no frames have been transmitted yet,
+		 * can't do temperature compensation until frames are transmitted.
+		 */
+		return;
+	} else {
+		slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
+
+		if (slope == 0) { /* to avoid divide by zero case */
+			delta = 0;
+		} else {
+			delta = ((currPDADC - ah->initPDADC)*4) / slope;
+		}
+		REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
+			      AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+		REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
+			      AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+	}
+}
+
+static void ath9k_olc_temp_compensation(struct ath_hw *ah)
+{
+	u32 rddata, i;
+	int delta, currPDADC, regval;
 
 	if (OLC_FOR_AR9287_10_LATER) {
+		ath9k_olc_temp_compensation_9287(ah);
+	} else {
+		rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
+		currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
+
 		if (ah->initPDADC == 0 || currPDADC == 0) {
 			return;
 		} else {
-			slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
-			if (slope == 0)
-				delta = 0;
+			if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
+				delta = (currPDADC - ah->initPDADC + 4) / 8;
 			else
-				delta = ((currPDADC - ah->initPDADC)*4) / slope;
-			REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
-					AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
-			REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
-					AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
-		}
-	} else {
-		if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
-			delta = (currPDADC - ah->initPDADC + 4) / 8;
-		else
-			delta = (currPDADC - ah->initPDADC + 5) / 10;
+				delta = (currPDADC - ah->initPDADC + 5) / 10;
 
-		if (delta != ah->PDADCdelta) {
-			ah->PDADCdelta = delta;
-			for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
-				regval = ah->originalGain[i] - delta;
-				if (regval < 0)
-					regval = 0;
+			if (delta != ah->PDADCdelta) {
+				ah->PDADCdelta = delta;
+				for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
+					regval = ah->originalGain[i] - delta;
+					if (regval < 0)
+						regval = 0;
 
-				REG_RMW_FIELD(ah, AR_PHY_TX_GAIN_TBL1 + i * 4,
-						AR_PHY_TX_GAIN, regval);
+					REG_RMW_FIELD(ah,
+						      AR_PHY_TX_GAIN_TBL1 + i * 4,
+						      AR_PHY_TX_GAIN, regval);
+				}
 			}
 		}
 	}
 }
 
-static void ath9k_hw_9271_pa_cal(struct ath_hw *ah)
+static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 {
 	u32 regVal;
 	unsigned int i;
@@ -845,7 +877,7 @@
 	REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0);
 
 	/* find off_6_1; */
-	for (i = 6; i >= 0; i--) {
+	for (i = 6; i > 0; i--) {
 		regVal = REG_READ(ah, 0x7834);
 		regVal |= (1 << (20 + i));
 		REG_WRITE(ah, 0x7834, regVal);
@@ -857,10 +889,19 @@
 		REG_WRITE(ah, 0x7834, regVal);
 	}
 
-	/*  Empirical offset correction  */
-#if 0
-	REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0x20);
-#endif
+	regVal = (regVal >>20) & 0x7f;
+
+	/* Update PA cal info */
+	if ((!is_reset) && (ah->pacal_info.prev_offset == regVal)) {
+		if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
+			ah->pacal_info.max_skipcount =
+				2 * ah->pacal_info.max_skipcount;
+		ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
+	} else {
+		ah->pacal_info.max_skipcount = 1;
+		ah->pacal_info.skipcount = 0;
+		ah->pacal_info.prev_offset = regVal;
+	}
 
 	regVal = REG_READ(ah, 0x7834);
 	regVal |= 0x1;
@@ -875,7 +916,7 @@
 
 static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah, bool is_reset)
 {
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 regVal;
 	int i, offset, offs_6_1, offs_0;
 	u32 ccomp_org, reg_field;
@@ -889,7 +930,7 @@
 		{ 0x7838, 0 },
 	};
 
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
+	ath_print(common, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
 
 	/* PA CAL is not needed for high power solution */
 	if (ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE) ==
@@ -1011,7 +1052,7 @@
 	if (longcal) {
 		/* Do periodic PAOffset Cal */
 		if (AR_SREV_9271(ah))
-			ath9k_hw_9271_pa_cal(ah);
+			ath9k_hw_9271_pa_cal(ah, false);
 		else if (AR_SREV_9285_11_OR_LATER(ah)) {
 			if (!ah->pacal_info.skipcount)
 				ath9k_hw_9285_pa_cal(ah, false);
@@ -1036,9 +1077,13 @@
 
 	return iscaldone;
 }
+EXPORT_SYMBOL(ath9k_hw_calibrate);
 
+/* Carrier leakage Calibration fix */
 static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
 	if (IS_CHAN_HT20(chan)) {
 		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_PARALLEL_CAL_ENABLE);
@@ -1049,9 +1094,9 @@
 		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
 		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
 				  AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "offset "
-				"calibration failed to complete in "
-				"1ms; noisy ??\n");
+			ath_print(common, ATH_DBG_CALIBRATE, "offset "
+				  "calibration failed to complete in "
+				  "1ms; noisy ??\n");
 			return false;
 		}
 		REG_CLR_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
@@ -1064,8 +1109,8 @@
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
 	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
 			  0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "offset calibration "
-				"failed to complete in 1ms; noisy ??\n");
+		ath_print(common, ATH_DBG_CALIBRATE, "offset calibration "
+			  "failed to complete in 1ms; noisy ??\n");
 		return false;
 	}
 
@@ -1078,7 +1123,9 @@
 
 bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	if (AR_SREV_9285_12_OR_LATER(ah)) {
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (AR_SREV_9271(ah) || AR_SREV_9285_12_OR_LATER(ah)) {
 		if (!ar9285_clc(ah, chan))
 			return false;
 	} else {
@@ -1098,9 +1145,9 @@
 		/* Poll for offset calibration complete */
 		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
 				   0, AH_WAIT_TIMEOUT)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"offset calibration failed to complete in 1ms; "
-				"noisy environment?\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "offset calibration failed to "
+				  "complete in 1ms; noisy environment?\n");
 			return false;
 		}
 
@@ -1114,7 +1161,9 @@
 	}
 
 	/* Do PA Calibration */
-	if (AR_SREV_9285_11_OR_LATER(ah))
+	if (AR_SREV_9271(ah))
+		ath9k_hw_9271_pa_cal(ah, true);
+	else if (AR_SREV_9285_11_OR_LATER(ah))
 		ath9k_hw_9285_pa_cal(ah, true);
 
 	/* Do NF Calibration after DC offset and other calibrations */
@@ -1128,20 +1177,20 @@
 		if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
 			INIT_CAL(&ah->adcgain_caldata);
 			INSERT_CAL(ah, &ah->adcgain_caldata);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"enabling ADC Gain Calibration.\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "enabling ADC Gain Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
 			INIT_CAL(&ah->adcdc_caldata);
 			INSERT_CAL(ah, &ah->adcdc_caldata);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"enabling ADC DC Calibration.\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "enabling ADC DC Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
 			INIT_CAL(&ah->iq_caldata);
 			INSERT_CAL(ah, &ah->iq_caldata);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"enabling IQ Calibration.\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "enabling IQ Calibration.\n");
 		}
 
 		ah->cal_list_curr = ah->cal_list;
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 9028ab1..b2c873e 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -17,6 +17,8 @@
 #ifndef CALIB_H
 #define CALIB_H
 
+#include "hw.h"
+
 extern const struct ath9k_percal_data iq_cal_multi_sample;
 extern const struct ath9k_percal_data iq_cal_single_sample;
 extern const struct ath9k_percal_data adc_gain_cal_multi_sample;
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
new file mode 100644
index 0000000..4d775ae
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -0,0 +1,299 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/*
+ * Module for common driver code between ath9k and ath9k_htc
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "common.h"
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
+MODULE_LICENSE("Dual BSD/GPL");
+
+/* Common RX processing */
+
+/* Assumes you've already done the endian to CPU conversion */
+static bool ath9k_rx_accept(struct ath_common *common,
+			    struct sk_buff *skb,
+			    struct ieee80211_rx_status *rxs,
+			    struct ath_rx_status *rx_stats,
+			    bool *decrypt_error)
+{
+	struct ath_hw *ah = common->ah;
+	struct ieee80211_hdr *hdr;
+	__le16 fc;
+
+	hdr = (struct ieee80211_hdr *) skb->data;
+	fc = hdr->frame_control;
+
+	if (!rx_stats->rs_datalen)
+		return false;
+        /*
+         * rs_status follows rs_datalen so if rs_datalen is too large
+         * we can take a hint that hardware corrupted it, so ignore
+         * those frames.
+         */
+	if (rx_stats->rs_datalen > common->rx_bufsize)
+		return false;
+
+	/*
+	 * rs_more indicates chained descriptors which can be used
+	 * to link buffers together for a sort of scatter-gather
+	 * operation.
+	 *
+	 * The rx_stats->rs_status will not be set until the end of the
+	 * chained descriptors so it can be ignored if rs_more is set. The
+	 * rs_more will be false at the last element of the chained
+	 * descriptors.
+	 */
+	if (!rx_stats->rs_more && rx_stats->rs_status != 0) {
+		if (rx_stats->rs_status & ATH9K_RXERR_CRC)
+			rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
+		if (rx_stats->rs_status & ATH9K_RXERR_PHY)
+			return false;
+
+		if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
+			*decrypt_error = true;
+		} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+			if (ieee80211_is_ctl(fc))
+				/*
+				 * Sometimes, we get invalid
+				 * MIC failures on valid control frames.
+				 * Remove these mic errors.
+				 */
+				rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
+			else
+				rxs->flag |= RX_FLAG_MMIC_ERROR;
+		}
+		/*
+		 * Reject error frames with the exception of
+		 * decryption and MIC failures. For monitor mode,
+		 * we also ignore the CRC error.
+		 */
+		if (ah->opmode == NL80211_IFTYPE_MONITOR) {
+			if (rx_stats->rs_status &
+			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
+			      ATH9K_RXERR_CRC))
+				return false;
+		} else {
+			if (rx_stats->rs_status &
+			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
+				return false;
+			}
+		}
+	}
+	return true;
+}
+
+static u8 ath9k_process_rate(struct ath_common *common,
+			     struct ieee80211_hw *hw,
+			     struct ath_rx_status *rx_stats,
+			     struct ieee80211_rx_status *rxs,
+			     struct sk_buff *skb)
+{
+	struct ieee80211_supported_band *sband;
+	enum ieee80211_band band;
+	unsigned int i = 0;
+
+	band = hw->conf.channel->band;
+	sband = hw->wiphy->bands[band];
+
+	if (rx_stats->rs_rate & 0x80) {
+		/* HT rate */
+		rxs->flag |= RX_FLAG_HT;
+		if (rx_stats->rs_flags & ATH9K_RX_2040)
+			rxs->flag |= RX_FLAG_40MHZ;
+		if (rx_stats->rs_flags & ATH9K_RX_GI)
+			rxs->flag |= RX_FLAG_SHORT_GI;
+		return rx_stats->rs_rate & 0x7f;
+	}
+
+	for (i = 0; i < sband->n_bitrates; i++) {
+		if (sband->bitrates[i].hw_value == rx_stats->rs_rate)
+			return i;
+		if (sband->bitrates[i].hw_value_short == rx_stats->rs_rate) {
+			rxs->flag |= RX_FLAG_SHORTPRE;
+			return i;
+		}
+	}
+
+	/* No valid hardware bitrate found -- we should not get here */
+	ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
+		  "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
+	if ((common->debug_mask & ATH_DBG_XMIT))
+		print_hex_dump_bytes("", DUMP_PREFIX_NONE, skb->data, skb->len);
+
+        return 0;
+}
+
+static void ath9k_process_rssi(struct ath_common *common,
+			       struct ieee80211_hw *hw,
+			       struct sk_buff *skb,
+			       struct ath_rx_status *rx_stats)
+{
+	struct ath_hw *ah = common->ah;
+	struct ieee80211_sta *sta;
+	struct ieee80211_hdr *hdr;
+	struct ath_node *an;
+	int last_rssi = ATH_RSSI_DUMMY_MARKER;
+	__le16 fc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+
+	rcu_read_lock();
+	/*
+	 * XXX: use ieee80211_find_sta! This requires quite a bit of work
+	 * under the current ath9k virtual wiphy implementation as we have
+	 * no way of tying a vif to wiphy. Typically vifs are attached to
+	 * at least one sdata of a wiphy on mac80211 but with ath9k virtual
+	 * wiphy you'd have to iterate over every wiphy and each sdata.
+	 */
+	sta = ieee80211_find_sta_by_hw(hw, hdr->addr2);
+	if (sta) {
+		an = (struct ath_node *) sta->drv_priv;
+		if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
+		   !rx_stats->rs_moreaggr)
+			ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi);
+		last_rssi = an->last_rssi;
+	}
+	rcu_read_unlock();
+
+	if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
+		rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
+					      ATH_RSSI_EP_MULTIPLIER);
+	if (rx_stats->rs_rssi < 0)
+		rx_stats->rs_rssi = 0;
+
+	/* Update Beacon RSSI, this is used by ANI. */
+	if (ieee80211_is_beacon(fc))
+		ah->stats.avgbrssi = rx_stats->rs_rssi;
+}
+
+/*
+ * For Decrypt or Demic errors, we only mark packet status here and always push
+ * up the frame up to let mac80211 handle the actual error case, be it no
+ * decryption key or real decryption error. This let us keep statistics there.
+ */
+int ath9k_cmn_rx_skb_preprocess(struct ath_common *common,
+				struct ieee80211_hw *hw,
+				struct sk_buff *skb,
+				struct ath_rx_status *rx_stats,
+				struct ieee80211_rx_status *rx_status,
+				bool *decrypt_error)
+{
+	struct ath_hw *ah = common->ah;
+
+	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
+	if (!ath9k_rx_accept(common, skb, rx_status, rx_stats, decrypt_error))
+		return -EINVAL;
+
+	ath9k_process_rssi(common, hw, skb, rx_stats);
+
+	rx_status->rate_idx = ath9k_process_rate(common, hw,
+						 rx_stats, rx_status, skb);
+	rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp);
+	rx_status->band = hw->conf.channel->band;
+	rx_status->freq = hw->conf.channel->center_freq;
+	rx_status->noise = common->ani.noise_floor;
+	rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi;
+	rx_status->antenna = rx_stats->rs_antenna;
+	rx_status->flag |= RX_FLAG_TSFT;
+
+	return 0;
+}
+EXPORT_SYMBOL(ath9k_cmn_rx_skb_preprocess);
+
+void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
+				  struct sk_buff *skb,
+				  struct ath_rx_status *rx_stats,
+				  struct ieee80211_rx_status *rxs,
+				  bool decrypt_error)
+{
+	struct ath_hw *ah = common->ah;
+	struct ieee80211_hdr *hdr;
+	int hdrlen, padpos, padsize;
+	u8 keyix;
+	__le16 fc;
+
+	/* see if any padding is done by the hw and remove it */
+	hdr = (struct ieee80211_hdr *) skb->data;
+	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+	fc = hdr->frame_control;
+	padpos = ath9k_cmn_padpos(hdr->frame_control);
+
+	/* The MAC header is padded to have 32-bit boundary if the
+	 * packet payload is non-zero. The general calculation for
+	 * padsize would take into account odd header lengths:
+	 * padsize = (4 - padpos % 4) % 4; However, since only
+	 * even-length headers are used, padding can only be 0 or 2
+	 * bytes and we can optimize this a bit. In addition, we must
+	 * not try to remove padding from short control frames that do
+	 * not have payload. */
+	padsize = padpos & 3;
+	if (padsize && skb->len>=padpos+padsize+FCS_LEN) {
+		memmove(skb->data + padsize, skb->data, padpos);
+		skb_pull(skb, padsize);
+	}
+
+	keyix = rx_stats->rs_keyix;
+
+	if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
+		rxs->flag |= RX_FLAG_DECRYPTED;
+	} else if (ieee80211_has_protected(fc)
+		   && !decrypt_error && skb->len >= hdrlen + 4) {
+		keyix = skb->data[hdrlen + 3] >> 6;
+
+		if (test_bit(keyix, common->keymap))
+			rxs->flag |= RX_FLAG_DECRYPTED;
+	}
+	if (ah->sw_mgmt_crypto &&
+	    (rxs->flag & RX_FLAG_DECRYPTED) &&
+	    ieee80211_is_mgmt(fc))
+		/* Use software decrypt for management frames. */
+		rxs->flag &= ~RX_FLAG_DECRYPTED;
+}
+EXPORT_SYMBOL(ath9k_cmn_rx_skb_postprocess);
+
+int ath9k_cmn_padpos(__le16 frame_control)
+{
+	int padpos = 24;
+	if (ieee80211_has_a4(frame_control)) {
+		padpos += ETH_ALEN;
+	}
+	if (ieee80211_is_data_qos(frame_control)) {
+		padpos += IEEE80211_QOS_CTL_LEN;
+	}
+
+	return padpos;
+}
+EXPORT_SYMBOL(ath9k_cmn_padpos);
+
+static int __init ath9k_cmn_init(void)
+{
+	return 0;
+}
+module_init(ath9k_cmn_init);
+
+static void __exit ath9k_cmn_exit(void)
+{
+	return;
+}
+module_exit(ath9k_cmn_exit);
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
new file mode 100644
index 0000000..042999c
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <net/mac80211.h>
+
+#include "../ath.h"
+#include "../debug.h"
+
+#include "hw.h"
+
+/* Common header for Atheros 802.11n base driver cores */
+
+#define WME_NUM_TID             16
+#define WME_BA_BMP_SIZE         64
+#define WME_MAX_BA              WME_BA_BMP_SIZE
+#define ATH_TID_MAX_BUFS        (2 * WME_MAX_BA)
+
+#define WME_AC_BE   0
+#define WME_AC_BK   1
+#define WME_AC_VI   2
+#define WME_AC_VO   3
+#define WME_NUM_AC  4
+
+#define ATH_RSSI_DUMMY_MARKER   0x127
+#define ATH_RSSI_LPF_LEN 		10
+#define RSSI_LPF_THRESHOLD		-20
+#define ATH_RSSI_EP_MULTIPLIER     (1<<7)
+#define ATH_EP_MUL(x, mul)         ((x) * (mul))
+#define ATH_RSSI_IN(x)             (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
+#define ATH_LPF_RSSI(x, y, len) \
+    ((x != ATH_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
+#define ATH_RSSI_LPF(x, y) do {                     			\
+    if ((y) >= RSSI_LPF_THRESHOLD)                         		\
+	x = ATH_LPF_RSSI((x), ATH_RSSI_IN((y)), ATH_RSSI_LPF_LEN);  	\
+} while (0)
+#define ATH_EP_RND(x, mul) 						\
+	((((x)%(mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
+
+struct ath_atx_ac {
+	int sched;
+	int qnum;
+	struct list_head list;
+	struct list_head tid_q;
+};
+
+struct ath_buf_state {
+	int bfs_nframes;
+	u16 bfs_al;
+	u16 bfs_frmlen;
+	int bfs_seqno;
+	int bfs_tidno;
+	int bfs_retries;
+	u8 bf_type;
+	u32 bfs_keyix;
+	enum ath9k_key_type bfs_keytype;
+};
+
+struct ath_buf {
+	struct list_head list;
+	struct ath_buf *bf_lastbf;	/* last buf of this unit (a frame or
+					   an aggregate) */
+	struct ath_buf *bf_next;	/* next subframe in the aggregate */
+	struct sk_buff *bf_mpdu;	/* enclosing frame structure */
+	struct ath_desc *bf_desc;	/* virtual addr of desc */
+	dma_addr_t bf_daddr;		/* physical addr of desc */
+	dma_addr_t bf_buf_addr;		/* physical addr of data buffer */
+	bool bf_stale;
+	bool bf_isnullfunc;
+	u16 bf_flags;
+	struct ath_buf_state bf_state;
+	dma_addr_t bf_dmacontext;
+	struct ath_wiphy *aphy;
+};
+
+struct ath_atx_tid {
+	struct list_head list;
+	struct list_head buf_q;
+	struct ath_node *an;
+	struct ath_atx_ac *ac;
+	struct ath_buf *tx_buf[ATH_TID_MAX_BUFS];
+	u16 seq_start;
+	u16 seq_next;
+	u16 baw_size;
+	int tidno;
+	int baw_head;   /* first un-acked tx buffer */
+	int baw_tail;   /* next unused tx buffer slot */
+	int sched;
+	int paused;
+	u8 state;
+};
+
+struct ath_node {
+	struct ath_common *common;
+	struct ath_atx_tid tid[WME_NUM_TID];
+	struct ath_atx_ac ac[WME_NUM_AC];
+	u16 maxampdu;
+	u8 mpdudensity;
+	int last_rssi;
+};
+
+int ath9k_cmn_rx_skb_preprocess(struct ath_common *common,
+				struct ieee80211_hw *hw,
+				struct sk_buff *skb,
+				struct ath_rx_status *rx_stats,
+				struct ieee80211_rx_status *rx_status,
+				bool *decrypt_error);
+
+void ath9k_cmn_rx_skb_postprocess(struct ath_common *common,
+				  struct sk_buff *skb,
+				  struct ath_rx_status *rx_stats,
+				  struct ieee80211_rx_status *rxs,
+				  bool decrypt_error);
+
+int ath9k_cmn_padpos(__le16 frame_control);
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 2be4c22..b66f72d 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -18,40 +18,30 @@
 
 #include "ath9k.h"
 
-static unsigned int ath9k_debug = DBG_DEFAULT;
-module_param_named(debug, ath9k_debug, uint, 0);
+#define REG_WRITE_D(_ah, _reg, _val) \
+	ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))
+#define REG_READ_D(_ah, _reg) \
+	ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
 
 static struct dentry *ath9k_debugfs_root;
 
-void DPRINTF(struct ath_softc *sc, int dbg_mask, const char *fmt, ...)
-{
-	if (!sc)
-		return;
-
-	if (sc->debug.debug_mask & dbg_mask) {
-		va_list args;
-
-		va_start(args, fmt);
-		printk(KERN_DEBUG "ath9k: ");
-		vprintk(fmt, args);
-		va_end(args);
-	}
-}
-
 static int ath9k_debugfs_open(struct inode *inode, struct file *file)
 {
 	file->private_data = inode->i_private;
 	return 0;
 }
 
+#ifdef CONFIG_ATH_DEBUG
+
 static ssize_t read_file_debug(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	char buf[32];
 	unsigned int len;
 
-	len = snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask);
+	len = snprintf(buf, sizeof(buf), "0x%08x\n", common->debug_mask);
 	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
 }
 
@@ -59,6 +49,7 @@
 			     size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	unsigned long mask;
 	char buf[32];
 	ssize_t len;
@@ -71,7 +62,7 @@
 	if (strict_strtoul(buf, 0, &mask))
 		return -EINVAL;
 
-	sc->debug.debug_mask = mask;
+	common->debug_mask = mask;
 	return count;
 }
 
@@ -82,6 +73,8 @@
 	.owner = THIS_MODULE
 };
 
+#endif
+
 static ssize_t read_file_dma(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
@@ -95,7 +88,7 @@
 
 	ath9k_ps_wakeup(sc);
 
-	REG_WRITE(ah, AR_MACMISC,
+	REG_WRITE_D(ah, AR_MACMISC,
 		  ((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
 		   (AR_MACMISC_MISC_OBS_BUS_1 <<
 		    AR_MACMISC_MISC_OBS_BUS_MSB_S)));
@@ -107,7 +100,7 @@
 		if (i % 4 == 0)
 			len += snprintf(buf + len, sizeof(buf) - len, "\n");
 
-		val[i] = REG_READ(ah, AR_DMADBG_0 + (i * sizeof(u32)));
+		val[i] = REG_READ_D(ah, AR_DMADBG_0 + (i * sizeof(u32)));
 		len += snprintf(buf + len, sizeof(buf) - len, "%d: %08x ",
 				i, val[i]);
 	}
@@ -157,9 +150,9 @@
 		(val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
 
 	len += snprintf(buf + len, sizeof(buf) - len, "pcu observe: 0x%x \n",
-			REG_READ(ah, AR_OBS_BUS_1));
+			REG_READ_D(ah, AR_OBS_BUS_1));
 	len += snprintf(buf + len, sizeof(buf) - len,
-			"AR_CR: 0x%x \n", REG_READ(ah, AR_CR));
+			"AR_CR: 0x%x \n", REG_READ_D(ah, AR_CR));
 
 	ath9k_ps_restore(sc);
 
@@ -266,18 +259,11 @@
 	.owner = THIS_MODULE
 };
 
-void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb)
+void ath_debug_stat_rc(struct ath_softc *sc, int final_rate)
 {
-	struct ath_tx_info_priv *tx_info_priv = NULL;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_tx_rate *rates = tx_info->status.rates;
-	int final_ts_idx, idx;
 	struct ath_rc_stats *stats;
 
-	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	final_ts_idx = tx_info_priv->tx.ts_rateindex;
-	idx = rates[final_ts_idx].idx;
-	stats = &sc->debug.stats.rcstats[idx];
+	stats = &sc->debug.stats.rcstats[final_rate];
 	stats->success++;
 }
 
@@ -376,12 +362,12 @@
 				aphy->chan_idx, aphy->chan_is_ht);
 	}
 
-	put_unaligned_le32(REG_READ(sc->sc_ah, AR_STA_ID0), addr);
-	put_unaligned_le16(REG_READ(sc->sc_ah, AR_STA_ID1) & 0xffff, addr + 4);
+	put_unaligned_le32(REG_READ_D(sc->sc_ah, AR_STA_ID0), addr);
+	put_unaligned_le16(REG_READ_D(sc->sc_ah, AR_STA_ID1) & 0xffff, addr + 4);
 	len += snprintf(buf + len, sizeof(buf) - len,
 			"addr: %pM\n", addr);
-	put_unaligned_le32(REG_READ(sc->sc_ah, AR_BSSMSKL), addr);
-	put_unaligned_le16(REG_READ(sc->sc_ah, AR_BSSMSKU) & 0xffff, addr + 4);
+	put_unaligned_le32(REG_READ_D(sc->sc_ah, AR_BSSMSKL), addr);
+	put_unaligned_le16(REG_READ_D(sc->sc_ah, AR_BSSMSKU) & 0xffff, addr + 4);
 	len += snprintf(buf + len, sizeof(buf) - len,
 			"addrmask: %pM\n", addr);
 
@@ -568,9 +554,10 @@
 	.owner = THIS_MODULE
 };
 
-int ath9k_init_debug(struct ath_softc *sc)
+int ath9k_init_debug(struct ath_hw *ah)
 {
-	sc->debug.debug_mask = ath9k_debug;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
 
 	if (!ath9k_debugfs_root)
 		return -ENOENT;
@@ -580,10 +567,12 @@
 	if (!sc->debug.debugfs_phy)
 		goto err;
 
+#ifdef CONFIG_ATH_DEBUG
 	sc->debug.debugfs_debug = debugfs_create_file("debug",
 		S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_debug);
 	if (!sc->debug.debugfs_debug)
 		goto err;
+#endif
 
 	sc->debug.debugfs_dma = debugfs_create_file("dma", S_IRUSR,
 				       sc->debug.debugfs_phy, sc, &fops_dma);
@@ -619,12 +608,15 @@
 
 	return 0;
 err:
-	ath9k_exit_debug(sc);
+	ath9k_exit_debug(ah);
 	return -ENOMEM;
 }
 
-void ath9k_exit_debug(struct ath_softc *sc)
+void ath9k_exit_debug(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
 	debugfs_remove(sc->debug.debugfs_xmit);
 	debugfs_remove(sc->debug.debugfs_wiphy);
 	debugfs_remove(sc->debug.debugfs_rcstat);
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 7241f47..536663e 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -17,36 +17,19 @@
 #ifndef DEBUG_H
 #define DEBUG_H
 
-enum ATH_DEBUG {
-	ATH_DBG_RESET		= 0x00000001,
-	ATH_DBG_QUEUE		= 0x00000002,
-	ATH_DBG_EEPROM		= 0x00000004,
-	ATH_DBG_CALIBRATE	= 0x00000008,
-	ATH_DBG_INTERRUPT	= 0x00000010,
-	ATH_DBG_REGULATORY	= 0x00000020,
-	ATH_DBG_ANI		= 0x00000040,
-	ATH_DBG_XMIT		= 0x00000080,
-	ATH_DBG_BEACON		= 0x00000100,
-	ATH_DBG_CONFIG		= 0x00000200,
-	ATH_DBG_FATAL		= 0x00000400,
-	ATH_DBG_PS		= 0x00000800,
-	ATH_DBG_HWTIMER		= 0x00001000,
-	ATH_DBG_BTCOEX		= 0x00002000,
-	ATH_DBG_ANY		= 0xffffffff
-};
-
-#define DBG_DEFAULT (ATH_DBG_FATAL)
+#include "hw.h"
+#include "rc.h"
 
 struct ath_txq;
 struct ath_buf;
 
-#ifdef CONFIG_ATH9K_DEBUG
+#ifdef CONFIG_ATH9K_DEBUGFS
 #define TX_STAT_INC(q, c) sc->debug.stats.txstats[q].c++
 #else
 #define TX_STAT_INC(q, c) do { } while (0)
 #endif
 
-#ifdef CONFIG_ATH9K_DEBUG
+#ifdef CONFIG_ATH9K_DEBUGFS
 
 /**
  * struct ath_interrupt_stats - Contains statistics about interrupts
@@ -140,7 +123,6 @@
 };
 
 struct ath9k_debug {
-	int debug_mask;
 	struct dentry *debugfs_phy;
 	struct dentry *debugfs_debug;
 	struct dentry *debugfs_dma;
@@ -151,13 +133,13 @@
 	struct ath_stats stats;
 };
 
-void DPRINTF(struct ath_softc *sc, int dbg_mask, const char *fmt, ...);
-int ath9k_init_debug(struct ath_softc *sc);
-void ath9k_exit_debug(struct ath_softc *sc);
+int ath9k_init_debug(struct ath_hw *ah);
+void ath9k_exit_debug(struct ath_hw *ah);
+
 int ath9k_debug_create_root(void);
 void ath9k_debug_remove_root(void);
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
-void ath_debug_stat_rc(struct ath_softc *sc, struct sk_buff *skb);
+void ath_debug_stat_rc(struct ath_softc *sc, int final_rate);
 void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq,
 		       struct ath_buf *bf);
 void ath_debug_stat_retries(struct ath_softc *sc, int rix,
@@ -165,17 +147,12 @@
 
 #else
 
-static inline void DPRINTF(struct ath_softc *sc, int dbg_mask,
-			   const char *fmt, ...)
-{
-}
-
-static inline int ath9k_init_debug(struct ath_softc *sc)
+static inline int ath9k_init_debug(struct ath_hw *ah)
 {
 	return 0;
 }
 
-static inline void ath9k_exit_debug(struct ath_softc *sc)
+static inline void ath9k_exit_debug(struct ath_hw *ah)
 {
 }
 
@@ -194,7 +171,7 @@
 }
 
 static inline void ath_debug_stat_rc(struct ath_softc *sc,
-				     struct sk_buff *skb)
+				     int final_rate)
 {
 }
 
@@ -209,6 +186,6 @@
 {
 }
 
-#endif /* CONFIG_ATH9K_DEBUG */
+#endif /* CONFIG_ATH9K_DEBUGFS */
 
 #endif /* DEBUG_H */
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index b6e52d0..dacaae9 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static inline u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
 {
@@ -83,11 +83,9 @@
 	return false;
 }
 
-bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data)
+bool ath9k_hw_nvram_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath_softc *sc = ah->ah_sc;
-
-	return sc->bus_ops->eeprom_read(ah, off, data);
+	return common->bus_ops->eeprom_read(common, off, data);
 }
 
 void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 4fe33f7..2f2993b 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -17,6 +17,7 @@
 #ifndef EEPROM_H
 #define EEPROM_H
 
+#include "../ath.h"
 #include <net/cfg80211.h>
 
 #define AH_USE_EEPROM   0x1
@@ -133,6 +134,7 @@
 #define AR5416_EEP_MINOR_VER_17      0x11
 #define AR5416_EEP_MINOR_VER_19      0x13
 #define AR5416_EEP_MINOR_VER_20      0x14
+#define AR5416_EEP_MINOR_VER_21      0x15
 #define AR5416_EEP_MINOR_VER_22      0x16
 
 #define AR5416_NUM_5G_CAL_PIERS         8
@@ -153,7 +155,7 @@
 #define AR5416_BCHAN_UNUSED             0xFF
 #define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64
 #define AR5416_MAX_CHAINS               3
-#define AR5416_PWR_TABLE_OFFSET         -5
+#define AR5416_PWR_TABLE_OFFSET_DB     -5
 
 /* Rx gain type values */
 #define AR5416_EEP_RXGAIN_23DB_BACKOFF     0
@@ -301,7 +303,7 @@
 	u8 txGainType;
 	u8 rcChainMask;
 	u8 desiredScaleCCK;
-	u8 power_table_offset;
+	u8 pwr_table_offset;
 	u8 frac_n_5g;
 	u8 futureBase_3[21];
 } __packed;
@@ -638,6 +640,7 @@
 } __packed;
 
 enum reg_ext_bitmap {
+	REG_EXT_FCC_MIDBAND = 0,
 	REG_EXT_JAPAN_MIDBAND = 1,
 	REG_EXT_FCC_DFS_HT40 = 2,
 	REG_EXT_JAPAN_NONDFS_HT40 = 3,
@@ -684,7 +687,7 @@
 			     int16_t targetRight);
 bool ath9k_hw_get_lower_upper_index(u8 target, u8 *pList, u16 listSize,
 				    u16 *indexL, u16 *indexR);
-bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data);
+bool ath9k_hw_nvram_read(struct ath_common *common, u32 off, u16 *data);
 void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
 			     u8 *pVpdList, u16 numIntercepts,
 			     u8 *pRetVpdList);
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index b8eca7b..68db166 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_4k_get_eeprom_ver(struct ath_hw *ah)
 {
@@ -29,20 +29,21 @@
 static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 {
 #define SIZE_EEPROM_4K (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eep_data = (u16 *)&ah->eeprom.map4k;
 	int addr, eep_start_loc = 0;
 
 	eep_start_loc = 64;
 
 	if (!ath9k_hw_use_flash(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Reading from EEPROM, not flash\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Reading from EEPROM, not flash\n");
 	}
 
 	for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
-		if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			       "Unable to read eeprom region \n");
+		if (!ath9k_hw_nvram_read(common, addr + eep_start_loc, eep_data)) {
+			ath_print(common, ATH_DBG_EEPROM,
+				  "Unable to read eeprom region \n");
 			return false;
 		}
 		eep_data++;
@@ -55,6 +56,7 @@
 static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 {
 #define EEPROM_4K_SIZE (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416_eeprom_4k *eep =
 		(struct ar5416_eeprom_4k *) &ah->eeprom.map4k;
 	u16 *eepdata, temp, magic, magic2;
@@ -64,15 +66,15 @@
 
 
 	if (!ath9k_hw_use_flash(ah)) {
-		if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
+		if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET,
 					 &magic)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Reading Magic # failed\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Reading Magic # failed\n");
 			return false;
 		}
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Read Magic = 0x%04X\n", magic);
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -87,16 +89,16 @@
 					eepdata++;
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"Invalid EEPROM Magic. "
-					"endianness mismatch.\n");
+				ath_print(common, ATH_DBG_FATAL,
+					  "Invalid EEPROM Magic. "
+					  "endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		need_swap ? "True" : "False");
+	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		  need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.map4k.baseEepHeader.length);
@@ -117,8 +119,8 @@
 		u32 integer;
 		u16 word;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Endianness is not native.. Changing\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "EEPROM Endianness is not native.. Changing\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -160,9 +162,9 @@
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
-			sum, ah->eep_ops->get_eeprom_ver(ah));
+		ath_print(common, ATH_DBG_FATAL,
+			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			  sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
 
@@ -208,6 +210,8 @@
 		return pBase->rxMask;
 	case EEP_FRAC_N_5G:
 		return 0;
+	case EEP_PWR_TABLE_OFFSET:
+		return AR5416_PWR_TABLE_OFFSET_DB;
 	default:
 		return 0;
 	}
@@ -385,6 +389,7 @@
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
 	struct cal_data_per_freq_4k *pRawDataset;
 	u8 *pCalBChans = NULL;
@@ -470,21 +475,21 @@
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC (%d,%4x): %4.4x %8.8x\n",
-					i, regChainOffset, regOffset,
-					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC: Chain %d | "
-					"PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d |\n",
-					i, 4 * j, pdadcValues[4 * j],
-					4 * j + 1, pdadcValues[4 * j + 1],
-					4 * j + 2, pdadcValues[4 * j + 2],
-					4 * j + 3,
-					pdadcValues[4 * j + 3]);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC (%d,%4x): %4.4x %8.8x\n",
+					  i, regChainOffset, regOffset,
+					  reg32);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC: Chain %d | "
+					  "PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d |\n",
+					  i, 4 * j, pdadcValues[4 * j],
+					  4 * j + 1, pdadcValues[4 * j + 1],
+					  4 * j + 2, pdadcValues[4 * j + 2],
+					  4 * j + 3,
+					  pdadcValues[4 * j + 3]);
 
 				regOffset += 4;
 			}
@@ -750,7 +755,7 @@
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
 		for (i = 0; i < Ar5416RateSize; i++)
-			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET_DB * 2;
 	}
 
 	/* OFDM power per rate */
@@ -1107,6 +1112,10 @@
 
 	REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
 		      pModal->txEndToRxOn);
+
+	if (AR_SREV_9271_10(ah))
+		REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON,
+			      pModal->txEndToRxOn);
 	REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62,
 		      pModal->thresh62);
 	REG_RMW_FIELD(ah, AR_PHY_EXT_CCA0, AR_PHY_EXT_CCA0_THRESH62,
@@ -1148,20 +1157,21 @@
 {
 #define EEP_MAP4K_SPURCHAN \
 	(ah->eeprom.map4k.modalHeader.spurChans[i].spurChan)
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	u16 spur_val = AR_NO_SPUR;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Getting spur idx %d is2Ghz. %d val %x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_print(common, ATH_DBG_ANI,
+		  "Getting spur idx %d is2Ghz. %d val %x\n",
+		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"Getting spur val from new loc. %d\n", spur_val);
+		ath_print(common, ATH_DBG_ANI,
+			  "Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_MAP4K_SPURCHAN;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index c20c21a..839d05a 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_AR9287_get_eeprom_ver(struct ath_hw *ah)
 {
@@ -29,20 +29,22 @@
 static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
 {
 	struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eep_data;
 	int addr, eep_start_loc = AR9287_EEP_START_LOC;
 	eep_data = (u16 *)eep;
 
 	if (!ath9k_hw_use_flash(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Reading from EEPROM, not flash\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Reading from EEPROM, not flash\n");
 	}
 
 	for (addr = 0; addr < sizeof(struct ar9287_eeprom) / sizeof(u16);
 			addr++)	{
-		if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"Unable to read eeprom region \n");
+		if (!ath9k_hw_nvram_read(common,
+					 addr + eep_start_loc, eep_data)) {
+			ath_print(common, ATH_DBG_EEPROM,
+				  "Unable to read eeprom region \n");
 			return false;
 		}
 		eep_data++;
@@ -57,17 +59,18 @@
 	int i, addr;
 	bool need_swap = false;
 	struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (!ath9k_hw_use_flash(ah)) {
-		if (!ath9k_hw_nvram_read
-		    (ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Reading Magic # failed\n");
+		if (!ath9k_hw_nvram_read(common,
+					 AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+			ath_print(common, ATH_DBG_FATAL,
+				  "Reading Magic # failed\n");
 			return false;
 		}
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"Read Magic = 0x%04X\n", magic);
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Read Magic = 0x%04X\n", magic);
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
 
@@ -83,15 +86,15 @@
 					eepdata++;
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"Invalid EEPROM Magic. "
-					"endianness mismatch.\n");
+				ath_print(common, ATH_DBG_FATAL,
+					  "Invalid EEPROM Magic. "
+					  "endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
-	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n", need_swap ?
-		"True" : "False");
+	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n", need_swap ?
+		  "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.map9287.baseEepHeader.length);
@@ -148,9 +151,9 @@
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR9287_EEP_VER
 	    || ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
-			 sum, ah->eep_ops->get_eeprom_ver(ah));
+		ath_print(common, ATH_DBG_FATAL,
+			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			   sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
 
@@ -436,6 +439,7 @@
 						struct ath9k_channel *chan,
 						int16_t *pTxPowerIndexOffset)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct cal_data_per_freq_ar9287 *pRawDataset;
 	struct cal_data_op_loop_ar9287 *pRawDatasetOpenLoop;
 	u8  *pCalBChans = NULL;
@@ -564,24 +568,25 @@
 						  & 0xFF) << 24) ;
 					REG_WRITE(ah, regOffset, reg32);
 
-					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-						"PDADC (%d,%4x): %4.4x %8.8x\n",
-						i, regChainOffset, regOffset,
-						reg32);
+					ath_print(common, ATH_DBG_EEPROM,
+						  "PDADC (%d,%4x): %4.4x "
+						  "%8.8x\n",
+						  i, regChainOffset, regOffset,
+						  reg32);
 
-					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-						"PDADC: Chain %d | "
-						"PDADC %3d Value %3d | "
-						"PDADC %3d Value %3d | "
-						"PDADC %3d Value %3d | "
-						"PDADC %3d Value %3d |\n",
-						i, 4 * j, pdadcValues[4 * j],
-						4 * j + 1,
-						pdadcValues[4 * j + 1],
-						4 * j + 2,
-						pdadcValues[4 * j + 2],
-						4 * j + 3,
-						pdadcValues[4 * j + 3]);
+					ath_print(common, ATH_DBG_EEPROM,
+						  "PDADC: Chain %d | "
+						  "PDADC %3d Value %3d | "
+						  "PDADC %3d Value %3d | "
+						  "PDADC %3d Value %3d | "
+						  "PDADC %3d Value %3d |\n",
+						  i, 4 * j, pdadcValues[4 * j],
+						  4 * j + 1,
+						  pdadcValues[4 * j + 1],
+						  4 * j + 2,
+						  pdadcValues[4 * j + 2],
+						  4 * j + 3,
+						  pdadcValues[4 * j + 3]);
 
 					regOffset += 4;
 				}
@@ -831,6 +836,7 @@
 {
 #define INCREASE_MAXPOW_BY_TWO_CHAIN     6
 #define INCREASE_MAXPOW_BY_THREE_CHAIN   10
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
 	struct modal_eep_ar9287_header *pModal = &pEepData->modalHeader;
@@ -966,8 +972,8 @@
 			INCREASE_MAXPOW_BY_THREE_CHAIN;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Invalid chainmask configuration\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Invalid chainmask configuration\n");
 		break;
 	}
 }
@@ -1138,19 +1144,20 @@
 {
 #define EEP_MAP9287_SPURCHAN \
 	(ah->eeprom.map9287.modalHeader.spurChans[i].spurChan)
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 spur_val = AR_NO_SPUR;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Getting spur idx %d is2Ghz. %d val %x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_print(common, ATH_DBG_ANI,
+		  "Getting spur idx %d is2Ghz. %d val %x\n",
+		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		       "Getting spur val from new loc. %d\n", spur_val);
+		ath_print(common, ATH_DBG_ANI,
+			  "Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_MAP9287_SPURCHAN;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 4071fc9..404a034 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static void ath9k_get_txgain_index(struct ath_hw *ah,
 		struct ath9k_channel *chan,
@@ -89,14 +89,15 @@
 static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah)
 {
 #define SIZE_EEPROM_DEF (sizeof(struct ar5416_eeprom_def) / sizeof(u16))
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eep_data = (u16 *)&ah->eeprom.def;
 	int addr, ar5416_eep_start_loc = 0x100;
 
 	for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) {
-		if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
+		if (!ath9k_hw_nvram_read(common, addr + ar5416_eep_start_loc,
 					 eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Unable to read eeprom region\n");
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -109,19 +110,20 @@
 {
 	struct ar5416_eeprom_def *eep =
 		(struct ar5416_eeprom_def *) &ah->eeprom.def;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eepdata, temp, magic, magic2;
 	u32 sum = 0, el;
 	bool need_swap = false;
 	int i, addr, size;
 
-	if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n");
+	if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+		ath_print(common, ATH_DBG_FATAL, "Reading Magic # failed\n");
 		return false;
 	}
 
 	if (!ath9k_hw_use_flash(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Read Magic = 0x%04X\n", magic);
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -137,16 +139,16 @@
 					eepdata++;
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"Invalid EEPROM Magic. "
-					"Endianness mismatch.\n");
+				ath_print(common, ATH_DBG_FATAL,
+					  "Invalid EEPROM Magic. "
+					  "Endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		need_swap ? "True" : "False");
+	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		  need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.def.baseEepHeader.length);
@@ -167,8 +169,8 @@
 		u32 integer, j;
 		u16 word;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Endianness is not native.. Changing.\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "EEPROM Endianness is not native.. Changing.\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -214,8 +216,8 @@
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+		ath_print(common, ATH_DBG_FATAL,
+			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
 			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
@@ -289,6 +291,11 @@
 			return pBase->frac_n_5g;
 		else
 			return 0;
+	case EEP_PWR_TABLE_OFFSET:
+		if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_21)
+			return pBase->pwr_table_offset;
+		else
+			return AR5416_PWR_TABLE_OFFSET_DB;
 	default:
 		return 0;
 	}
@@ -739,6 +746,76 @@
 	return;
 }
 
+static int16_t ath9k_change_gain_boundary_setting(struct ath_hw *ah,
+				u16 *gb,
+				u16 numXpdGain,
+				u16 pdGainOverlap_t2,
+				int8_t pwr_table_offset,
+				int16_t *diff)
+
+{
+	u16 k;
+
+	/* Prior to writing the boundaries or the pdadc vs. power table
+	 * into the chip registers the default starting point on the pdadc
+	 * vs. power table needs to be checked and the curve boundaries
+	 * adjusted accordingly
+	 */
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		u16 gb_limit;
+
+		if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
+			/* get the difference in dB */
+			*diff = (u16)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB);
+			/* get the number of half dB steps */
+			*diff *= 2;
+			/* change the original gain boundary settings
+			 * by the number of half dB steps
+			 */
+			for (k = 0; k < numXpdGain; k++)
+				gb[k] = (u16)(gb[k] - *diff);
+		}
+		/* Because of a hardware limitation, ensure the gain boundary
+		 * is not larger than (63 - overlap)
+		 */
+		gb_limit = (u16)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2);
+
+		for (k = 0; k < numXpdGain; k++)
+			gb[k] = (u16)min(gb_limit, gb[k]);
+	}
+
+	return *diff;
+}
+
+static void ath9k_adjust_pdadc_values(struct ath_hw *ah,
+				      int8_t pwr_table_offset,
+				      int16_t diff,
+				      u8 *pdadcValues)
+{
+#define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff)
+	u16 k;
+
+	/* If this is a board that has a pwrTableOffset that differs from
+	 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the
+	 * pdadc vs pwr table needs to be adjusted prior to writing to the
+	 * chip.
+	 */
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
+			/* shift the table to start at the new offset */
+			for (k = 0; k < (u16)NUM_PDADC(diff); k++ ) {
+				pdadcValues[k] = pdadcValues[k + diff];
+			}
+
+			/* fill the back of the table */
+			for (k = (u16)NUM_PDADC(diff); k < NUM_PDADC(0); k++) {
+				pdadcValues[k] = pdadcValues[NUM_PDADC(diff)];
+			}
+		}
+	}
+#undef NUM_PDADC
+}
+
 static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
@@ -746,7 +823,7 @@
 #define SM_PD_GAIN(x) SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##x)
 #define SM_PDGAIN_B(x, y) \
 		SM((gainBoundaries[x]), AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##y)
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
 	struct cal_data_per_freq *pRawDataset;
 	u8 *pCalBChans = NULL;
@@ -754,15 +831,18 @@
 	static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
 	u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
 	u16 numPiers, i, j;
-	int16_t tMinCalPower;
+	int16_t tMinCalPower, diff = 0;
 	u16 numXpdGain, xpdMask;
 	u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 };
 	u32 reg32, regOffset, regChainOffset;
 	int16_t modalIdx;
+	int8_t pwr_table_offset;
 
 	modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
 	xpdMask = pEepData->modalHeader[modalIdx].xpdGain;
 
+	pwr_table_offset = ah->eep_ops->get_eeprom(ah, EEP_PWR_TABLE_OFFSET);
+
 	if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
 	    AR5416_EEP_MINOR_VER_2) {
 		pdGainOverlap_t2 =
@@ -842,6 +922,13 @@
 							numXpdGain);
 			}
 
+			diff = ath9k_change_gain_boundary_setting(ah,
+							   gainBoundaries,
+							   numXpdGain,
+							   pdGainOverlap_t2,
+							   pwr_table_offset,
+							   &diff);
+
 			if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
 				if (OLC_FOR_AR9280_20_LATER) {
 					REG_WRITE(ah,
@@ -862,6 +949,10 @@
 				}
 			}
 
+
+			ath9k_adjust_pdadc_values(ah, pwr_table_offset,
+						  diff, pdadcValues);
+
 			regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;
 			for (j = 0; j < 32; j++) {
 				reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) |
@@ -870,20 +961,20 @@
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC (%d,%4x): %4.4x %8.8x\n",
-					i, regChainOffset, regOffset,
-					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC: Chain %d | PDADC %3d "
-					"Value %3d | PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d | PDADC %3d "
-					"Value %3d |\n",
-					i, 4 * j, pdadcValues[4 * j],
-					4 * j + 1, pdadcValues[4 * j + 1],
-					4 * j + 2, pdadcValues[4 * j + 2],
-					4 * j + 3,
-					pdadcValues[4 * j + 3]);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC (%d,%4x): %4.4x %8.8x\n",
+					  i, regChainOffset, regOffset,
+					  reg32);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC: Chain %d | PDADC %3d "
+					  "Value %3d | PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d | PDADC %3d "
+					  "Value %3d |\n",
+					  i, 4 * j, pdadcValues[4 * j],
+					  4 * j + 1, pdadcValues[4 * j + 1],
+					  4 * j + 2, pdadcValues[4 * j + 2],
+					  4 * j + 3,
+					  pdadcValues[4 * j + 3]);
 
 				regOffset += 4;
 			}
@@ -1197,8 +1288,13 @@
 	}
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		for (i = 0; i < Ar5416RateSize; i++)
-			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+		for (i = 0; i < Ar5416RateSize; i++) {
+			int8_t pwr_table_offset;
+
+			pwr_table_offset = ah->eep_ops->get_eeprom(ah,
+							EEP_PWR_TABLE_OFFSET);
+			ratesArray[i] -= pwr_table_offset * 2;
+		}
 	}
 
 	REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
@@ -1297,7 +1393,7 @@
 
 	if (AR_SREV_9280_10_OR_LATER(ah))
 		regulatory->max_power_level =
-			ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
+			ratesArray[i] + AR5416_PWR_TABLE_OFFSET_DB * 2;
 	else
 		regulatory->max_power_level = ratesArray[i];
 
@@ -1311,8 +1407,8 @@
 		regulatory->max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Invalid chainmask configuration\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_EEPROM,
+			  "Invalid chainmask configuration\n");
 		break;
 	}
 }
@@ -1349,20 +1445,21 @@
 {
 #define EEP_DEF_SPURCHAN \
 	(ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan)
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	u16 spur_val = AR_NO_SPUR;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Getting spur idx %d is2Ghz. %d val %x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_print(common, ATH_DBG_ANI,
+		  "Getting spur idx %d is2Ghz. %d val %x\n",
+		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"Getting spur val from new loc. %d\n", spur_val);
+		ath_print(common, ATH_DBG_ANI,
+			  "Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_DEF_SPURCHAN;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ca7694c..2ec61f0 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,9 +16,9 @@
 
 #include <linux/io.h>
 #include <asm/unaligned.h>
-#include <linux/pci.h>
 
-#include "ath9k.h"
+#include "hw.h"
+#include "rc.h"
 #include "initvals.h"
 
 #define ATH9K_CLOCK_RATE_CCK		22
@@ -26,13 +26,27 @@
 #define ATH9K_CLOCK_RATE_2GHZ_OFDM	44
 
 static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type);
-static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan,
-			      enum ath9k_ht_macmode macmode);
+static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan);
 static u32 ath9k_hw_ini_fixup(struct ath_hw *ah,
 			      struct ar5416_eeprom_def *pEepData,
 			      u32 reg, u32 value);
-static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
-static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static int __init ath9k_init(void)
+{
+	return 0;
+}
+module_init(ath9k_init);
+
+static void __exit ath9k_exit(void)
+{
+	return;
+}
+module_exit(ath9k_exit);
 
 /********************/
 /* Helper Functions */
@@ -40,7 +54,7 @@
 
 static u32 ath9k_hw_mac_usec(struct ath_hw *ah, u32 clks)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (!ah->curchan) /* should really check for CCK instead */
 		return clks / ATH9K_CLOCK_RATE_CCK;
@@ -52,7 +66,7 @@
 
 static u32 ath9k_hw_mac_to_usec(struct ath_hw *ah, u32 clks)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (conf_is_ht40(conf))
 		return ath9k_hw_mac_usec(ah, clks) / 2;
@@ -62,7 +76,7 @@
 
 static u32 ath9k_hw_mac_clks(struct ath_hw *ah, u32 usecs)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (!ah->curchan) /* should really check for CCK instead */
 		return usecs *ATH9K_CLOCK_RATE_CCK;
@@ -73,7 +87,7 @@
 
 static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (conf_is_ht40(conf))
 		return ath9k_hw_mac_clks(ah, usecs) * 2;
@@ -81,38 +95,6 @@
 		return ath9k_hw_mac_clks(ah, usecs);
 }
 
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-{
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-}
-
-unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-{
-	u32 val;
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-	return val;
-}
-
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 {
 	int i;
@@ -126,12 +108,13 @@
 		udelay(AH_TIME_QUANTUM);
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-		"timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
-		timeout, reg, REG_READ(ah, reg), mask, val);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_ANY,
+		  "timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
+		  timeout, reg, REG_READ(ah, reg), mask, val);
 
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_wait);
 
 u32 ath9k_hw_reverse_bits(u32 val, u32 n)
 {
@@ -165,22 +148,19 @@
 }
 
 u16 ath9k_hw_computetxtime(struct ath_hw *ah,
-			   const struct ath_rate_table *rates,
+			   u8 phy, int kbps,
 			   u32 frameLen, u16 rateix,
 			   bool shortPreamble)
 {
 	u32 bitsPerSymbol, numBits, numSymbols, phyTime, txTime;
-	u32 kbps;
-
-	kbps = rates->info[rateix].ratekbps;
 
 	if (kbps == 0)
 		return 0;
 
-	switch (rates->info[rateix].phy) {
+	switch (phy) {
 	case WLAN_RC_PHY_CCK:
 		phyTime = CCK_PREAMBLE_BITS + CCK_PLCP_BITS;
-		if (shortPreamble && rates->info[rateix].short_preamble)
+		if (shortPreamble)
 			phyTime >>= 1;
 		numBits = frameLen << 3;
 		txTime = CCK_SIFS_TIME + phyTime + ((numBits * 1000) / kbps);
@@ -210,15 +190,15 @@
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Unknown phy %u (rate ix %u)\n",
-			rates->info[rateix].phy, rateix);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "Unknown phy %u (rate ix %u)\n", phy, rateix);
 		txTime = 0;
 		break;
 	}
 
 	return txTime;
 }
+EXPORT_SYMBOL(ath9k_hw_computetxtime);
 
 void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
@@ -245,10 +225,9 @@
 
 	centers->ctl_center =
 		centers->synth_center - (extoff * HT40_CHANNEL_CENTER_SHIFT);
+	/* 25 MHz spacing is supported by hw but not on upper layers */
 	centers->ext_center =
-		centers->synth_center + (extoff *
-			 ((ah->extprotspacing == ATH9K_HT_EXTPROTSPACING_20) ?
-			  HT40_CHANNEL_CENTER_SHIFT : 15));
+		centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT);
 }
 
 /******************/
@@ -317,6 +296,7 @@
 
 static bool ath9k_hw_chip_test(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 regAddr[2] = { AR_STA_ID0, AR_PHY_BASE + (8 << 2) };
 	u32 regHold[2];
 	u32 patternData[4] = { 0x55555555,
@@ -335,10 +315,11 @@
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (rdData != wrData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"address test failed "
-					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
-					addr, wrData, rdData);
+				ath_print(common, ATH_DBG_FATAL,
+					  "address test failed "
+					  "addr: 0x%08x - wr:0x%08x != "
+					  "rd:0x%08x\n",
+					  addr, wrData, rdData);
 				return false;
 			}
 		}
@@ -347,10 +328,11 @@
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (wrData != rdData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"address test failed "
-					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
-					addr, wrData, rdData);
+				ath_print(common, ATH_DBG_FATAL,
+					  "address test failed "
+					  "addr: 0x%08x - wr:0x%08x != "
+					  "rd:0x%08x\n",
+					  addr, wrData, rdData);
 				return false;
 			}
 		}
@@ -404,8 +386,6 @@
 	ah->config.cck_trig_high = 200;
 	ah->config.cck_trig_low = 100;
 	ah->config.enable_ani = 1;
-	ah->config.diversity_control = ATH9K_ANT_VARIABLE;
-	ah->config.antenna_switch_swap = 0;
 
 	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 		ah->config.spurchans[i][0] = AR_NO_SPUR;
@@ -433,6 +413,7 @@
 	if (num_possible_cpus() > 1)
 		ah->config.serialize_regmode = SER_REG_MODE_AUTO;
 }
+EXPORT_SYMBOL(ath9k_hw_init);
 
 static void ath9k_hw_init_defaults(struct ath_hw *ah)
 {
@@ -459,27 +440,9 @@
 	ah->acktimeout = (u32) -1;
 	ah->ctstimeout = (u32) -1;
 	ah->globaltxtimeout = (u32) -1;
-
-	ah->gbeacon_rate = 0;
-
 	ah->power_mode = ATH9K_PM_UNDEFINED;
 }
 
-static int ath9k_hw_rfattach(struct ath_hw *ah)
-{
-	bool rfStatus = false;
-	int ecode = 0;
-
-	rfStatus = ath9k_hw_init_rf(ah, &ecode);
-	if (!rfStatus) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"RF setup failed, status: %u\n", ecode);
-		return ecode;
-	}
-
-	return 0;
-}
-
 static int ath9k_hw_rf_claim(struct ath_hw *ah)
 {
 	u32 val;
@@ -497,9 +460,9 @@
 	case AR_RAD2122_SREV_MAJOR:
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Radio Chip Rev 0x%02X not supported\n",
-			val & AR_RADIO_SREV_MAJOR);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "Radio Chip Rev 0x%02X not supported\n",
+			  val & AR_RADIO_SREV_MAJOR);
 		return -EOPNOTSUPP;
 	}
 
@@ -510,6 +473,7 @@
 
 static int ath9k_hw_init_macaddr(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 sum;
 	int i;
 	u16 eeval;
@@ -518,8 +482,8 @@
 	for (i = 0; i < 3; i++) {
 		eeval = ah->eep_ops->get_eeprom(ah, AR_EEPROM_MAC(i));
 		sum += eeval;
-		ah->macaddr[2 * i] = eeval >> 8;
-		ah->macaddr[2 * i + 1] = eeval & 0xff;
+		common->macaddr[2 * i] = eeval >> 8;
+		common->macaddr[2 * i + 1] = eeval & 0xff;
 	}
 	if (sum == 0 || sum == 0xffff * 3)
 		return -EADDRNOTAVAIL;
@@ -590,12 +554,20 @@
 	if (ecode != 0)
 		return ecode;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_CONFIG, "Eeprom VER: %d, REV: %d\n",
-		ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah));
+	ath_print(ath9k_hw_common(ah), ATH_DBG_CONFIG,
+		  "Eeprom VER: %d, REV: %d\n",
+		  ah->eep_ops->get_eeprom_ver(ah),
+		  ah->eep_ops->get_eeprom_rev(ah));
 
-	ecode = ath9k_hw_rfattach(ah);
-	if (ecode != 0)
-		return ecode;
+        if (!AR_SREV_9280_10_OR_LATER(ah)) {
+		ecode = ath9k_hw_rf_alloc_ext_banks(ah);
+		if (ecode) {
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "Failed allocating banks for "
+				  "external radio\n");
+			return ecode;
+		}
+	}
 
 	if (!AR_SREV_9100(ah)) {
 		ath9k_hw_ani_setup(ah);
@@ -617,6 +589,7 @@
 	case AR9285_DEVID_PCIE:
 	case AR5416_DEVID_AR9287_PCI:
 	case AR5416_DEVID_AR9287_PCIE:
+	case AR9271_USB:
 		return true;
 	default:
 		break;
@@ -634,9 +607,8 @@
 	case AR_SREV_VERSION_9280:
 	case AR_SREV_VERSION_9285:
 	case AR_SREV_VERSION_9287:
-		return true;
-	/* Not yet */
 	case AR_SREV_VERSION_9271:
+		return true;
 	default:
 		break;
 	}
@@ -670,10 +642,13 @@
 static void ath9k_hw_init_mode_regs(struct ath_hw *ah)
 {
 	if (AR_SREV_9271(ah)) {
-		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271_1_0,
-			       ARRAY_SIZE(ar9271Modes_9271_1_0), 6);
-		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271_1_0,
-			       ARRAY_SIZE(ar9271Common_9271_1_0), 2);
+		INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271,
+			       ARRAY_SIZE(ar9271Modes_9271), 6);
+		INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271,
+			       ARRAY_SIZE(ar9271Common_9271), 2);
+		INIT_INI_ARRAY(&ah->iniModes_9271_1_0_only,
+			       ar9271Modes_9271_1_0_only,
+			       ARRAY_SIZE(ar9271Modes_9271_1_0_only), 6);
 		return;
 	}
 
@@ -905,21 +880,27 @@
 
 int ath9k_hw_init(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int r = 0;
 
-	if (!ath9k_hw_devid_supported(ah->hw_version.devid))
+	if (!ath9k_hw_devid_supported(ah->hw_version.devid)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unsupported device ID: 0x%0x\n",
+			  ah->hw_version.devid);
 		return -EOPNOTSUPP;
+	}
 
 	ath9k_hw_init_defaults(ah);
 	ath9k_hw_init_config(ah);
 
 	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Couldn't reset chip\n");
 		return -EIO;
 	}
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
+		ath_print(common, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
 		return -EIO;
 	}
 
@@ -934,14 +915,19 @@
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "serialize_regmode is %d\n",
+	ath_print(common, ATH_DBG_RESET, "serialize_regmode is %d\n",
 		ah->config.serialize_regmode);
 
+	if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
+		ah->config.max_txtrig_level = MAX_TX_FIFO_THRESHOLD >> 1;
+	else
+		ah->config.max_txtrig_level = MAX_TX_FIFO_THRESHOLD;
+
 	if (!ath9k_hw_macversion_supported(ah->hw_version.macVersion)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Mac Chip Rev 0x%02x.%x is not supported by "
-			"this driver\n", ah->hw_version.macVersion,
-			ah->hw_version.macRev);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Mac Chip Rev 0x%02x.%x is not supported by "
+			  "this driver\n", ah->hw_version.macVersion,
+			  ah->hw_version.macRev);
 		return -EOPNOTSUPP;
 	}
 
@@ -959,8 +945,14 @@
 	ath9k_hw_init_cal_settings(ah);
 
 	ah->ani_function = ATH9K_ANI_ALL;
-	if (AR_SREV_9280_10_OR_LATER(ah))
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
 		ah->ani_function &= ~ATH9K_ANI_NOISE_IMMUNITY_LEVEL;
+		ah->ath9k_hw_rf_set_freq = &ath9k_hw_ar9280_set_channel;
+		ah->ath9k_hw_spur_mitigate_freq = &ath9k_hw_9280_spur_mitigate;
+	} else {
+		ah->ath9k_hw_rf_set_freq = &ath9k_hw_set_channel;
+		ah->ath9k_hw_spur_mitigate_freq = &ath9k_hw_spur_mitigate;
+	}
 
 	ath9k_hw_init_mode_regs(ah);
 
@@ -969,18 +961,31 @@
 	else
 		ath9k_hw_disablepcie(ah);
 
+	/* Support for Japan ch.14 (2484) spread */
+	if (AR_SREV_9287_11_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniCckfirNormal,
+		       ar9287Common_normal_cck_fir_coeff_92871_1,
+		       ARRAY_SIZE(ar9287Common_normal_cck_fir_coeff_92871_1), 2);
+		INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
+		       ar9287Common_japan_2484_cck_fir_coeff_92871_1,
+		       ARRAY_SIZE(ar9287Common_japan_2484_cck_fir_coeff_92871_1), 2);
+	}
+
 	r = ath9k_hw_post_init(ah);
 	if (r)
 		return r;
 
 	ath9k_hw_init_mode_gain_regs(ah);
-	ath9k_hw_fill_cap_info(ah);
+	r = ath9k_hw_fill_cap_info(ah);
+	if (r)
+		return r;
+
 	ath9k_hw_init_11a_eeprom_fix(ah);
 
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Failed to initialize MAC address\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to initialize MAC address\n");
 		return r;
 	}
 
@@ -991,6 +996,8 @@
 
 	ath9k_init_nfcal_hist_buffer(ah);
 
+	common->state = ATH_HW_INITIALIZED;
+
 	return 0;
 }
 
@@ -1027,6 +1034,22 @@
 	REG_WRITE(ah, AR_TXOP_12_15, 0xFFFFFFFF);
 }
 
+static void ath9k_hw_change_target_baud(struct ath_hw *ah, u32 freq, u32 baud)
+{
+	u32 lcr;
+	u32 baud_divider = freq * 1000 * 1000 / 16 / baud;
+
+	lcr = REG_READ(ah , 0x5100c);
+	lcr |= 0x80;
+
+	REG_WRITE(ah, 0x5100c, lcr);
+	REG_WRITE(ah, 0x51004, (baud_divider >> 8));
+	REG_WRITE(ah, 0x51000, (baud_divider & 0xff));
+
+	lcr &= ~0x80;
+	REG_WRITE(ah, 0x5100c, lcr);
+}
+
 static void ath9k_hw_init_pll(struct ath_hw *ah,
 			      struct ath9k_channel *chan)
 {
@@ -1090,6 +1113,26 @@
 	}
 	REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);
 
+	/* Switch the core clock for ar9271 to 117Mhz */
+	if (AR_SREV_9271(ah)) {
+		if ((pll == 0x142c) || (pll == 0x2850) ) {
+			udelay(500);
+			/* set CLKOBS to output AHB clock */
+			REG_WRITE(ah, 0x7020, 0xe);
+			/*
+			 * 0x304: 117Mhz, ahb_ratio: 1x1
+			 * 0x306: 40Mhz, ahb_ratio: 1x1
+			 */
+			REG_WRITE(ah, 0x50040, 0x304);
+			/*
+			 * makes adjustments for the baud dividor to keep the
+			 * targetted baud rate based on the used core clock.
+			 */
+			ath9k_hw_change_target_baud(ah, AR9271_CORE_CLOCK,
+						    AR9271_TARGET_BAUD_RATE);
+		}
+	}
+
 	udelay(RTC_PLL_SETTLE_DELAY);
 
 	REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
@@ -1107,7 +1150,7 @@
 		REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
 			    AR_PHY_SWAP_ALT_CHAIN);
 	case 0x3:
-		if (((ah)->hw_version.macVersion <= AR_SREV_VERSION_9160)) {
+		if (ah->hw_version.macVersion == AR_SREV_REVISION_5416_10) {
 			REG_WRITE(ah, AR_PHY_RX_CHAINMASK, 0x7);
 			REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, 0x7);
 			break;
@@ -1164,7 +1207,8 @@
 static bool ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
 {
 	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "bad ack timeout %u\n", us);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "bad ack timeout %u\n", us);
 		ah->acktimeout = (u32) -1;
 		return false;
 	} else {
@@ -1178,7 +1222,8 @@
 static bool ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
 {
 	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "bad cts timeout %u\n", us);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "bad cts timeout %u\n", us);
 		ah->ctstimeout = (u32) -1;
 		return false;
 	} else {
@@ -1192,8 +1237,8 @@
 static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
 {
 	if (tu > 0xFFFF) {
-		DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
-			"bad global tx timeout %u\n", tu);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_XMIT,
+			  "bad global tx timeout %u\n", tu);
 		ah->globaltxtimeout = (u32) -1;
 		return false;
 	} else {
@@ -1205,8 +1250,8 @@
 
 static void ath9k_hw_init_user_settings(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
-		ah->misc_mode);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
+		  ah->misc_mode);
 
 	if (ah->misc_mode != 0)
 		REG_WRITE(ah, AR_PCU_MISC,
@@ -1229,14 +1274,23 @@
 
 void ath9k_hw_detach(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (common->state <= ATH_HW_INITIALIZED)
+		goto free_hw;
+
 	if (!AR_SREV_9100(ah))
 		ath9k_hw_ani_disable(ah);
 
-	ath9k_hw_rf_free(ah);
 	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
+
+free_hw:
+	if (!AR_SREV_9280_10_OR_LATER(ah))
+		ath9k_hw_rf_free_ext_banks(ah);
 	kfree(ah);
 	ah = NULL;
 }
+EXPORT_SYMBOL(ath9k_hw_detach);
 
 /*******/
 /* INI */
@@ -1254,7 +1308,8 @@
 		 * AR9271 1.1
 		 */
 		if (AR_SREV_9271_10(ah)) {
-			val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) | AR_PHY_SPECTRAL_SCAN_ENABLE;
+			val = REG_READ(ah, AR_PHY_SPECTRAL_SCAN) |
+			      AR_PHY_SPECTRAL_SCAN_ENABLE;
 			REG_WRITE(ah, AR_PHY_SPECTRAL_SCAN, val);
 		}
 		else if (AR_SREV_9271_11(ah))
@@ -1298,28 +1353,29 @@
 			      u32 reg, u32 value)
 {
 	struct base_eep_header *pBase = &(pEepData->baseEepHeader);
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	switch (ah->hw_version.devid) {
 	case AR9280_DEVID_PCI:
 		if (reg == 0x7894) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			ath_print(common, ATH_DBG_EEPROM,
 				"ini VAL: %x  EEPROM: %x\n", value,
 				(pBase->version & 0xff));
 
 			if ((pBase->version & 0xff) > 0x0a) {
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PWDCLKIND: %d\n",
-					pBase->pwdclkind);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PWDCLKIND: %d\n",
+					  pBase->pwdclkind);
 				value &= ~AR_AN_TOP2_PWDCLKIND;
 				value |= AR_AN_TOP2_PWDCLKIND &
 					(pBase->pwdclkind << AR_AN_TOP2_PWDCLKIND_S);
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PWDCLKIND Earlier Rev\n");
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PWDCLKIND Earlier Rev\n");
 			}
 
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"final ini VAL: %x\n", value);
+			ath_print(common, ATH_DBG_EEPROM,
+				  "final ini VAL: %x\n", value);
 		}
 		break;
 	}
@@ -1374,8 +1430,7 @@
 }
 
 static int ath9k_hw_process_ini(struct ath_hw *ah,
-				struct ath9k_channel *chan,
-				enum ath9k_ht_macmode macmode)
+				struct ath9k_channel *chan)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	int i, regWrites = 0;
@@ -1469,7 +1524,11 @@
 		DO_DELAY(regWrites);
 	}
 
-	ath9k_hw_write_regs(ah, modesIndex, freqIndex, regWrites);
+	ath9k_hw_write_regs(ah, freqIndex, regWrites);
+
+	if (AR_SREV_9271_10(ah))
+		REG_WRITE_ARRAY(&ah->iniModes_9271_1_0_only,
+				modesIndex, regWrites);
 
 	if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan)) {
 		REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex,
@@ -1477,7 +1536,7 @@
 	}
 
 	ath9k_hw_override_ini(ah, chan);
-	ath9k_hw_set_regs(ah, chan, macmode);
+	ath9k_hw_set_regs(ah, chan);
 	ath9k_hw_init_chain_masks(ah);
 
 	if (OLC_FOR_AR9280_20_LATER)
@@ -1491,8 +1550,8 @@
 				 (u32) regulatory->power_limit));
 
 	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"ar5416SetRfRegs failed\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "ar5416SetRfRegs failed\n");
 		return -EIO;
 	}
 
@@ -1697,16 +1756,14 @@
 
 	REG_WRITE(ah, AR_RTC_RC, 0);
 	if (!ath9k_hw_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
-			"RTC stuck in MAC reset\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "RTC stuck in MAC reset\n");
 		return false;
 	}
 
 	if (!AR_SREV_9100(ah))
 		REG_WRITE(ah, AR_RC, 0);
 
-	ath9k_hw_init_pll(ah, NULL);
-
 	if (AR_SREV_9100(ah))
 		udelay(50);
 
@@ -1734,7 +1791,8 @@
 			   AR_RTC_STATUS_M,
 			   AR_RTC_STATUS_ON,
 			   AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "RTC not waking up\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "RTC not waking up\n");
 		return false;
 	}
 
@@ -1759,8 +1817,7 @@
 	}
 }
 
-static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan,
-			      enum ath9k_ht_macmode macmode)
+static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	u32 phymode;
 	u32 enableDacFifo = 0;
@@ -1779,12 +1836,10 @@
 		    (chan->chanmode == CHANNEL_G_HT40PLUS))
 			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
 
-		if (ah->extprotspacing == ATH9K_HT_EXTPROTSPACING_25)
-			phymode |= AR_PHY_FC_DYN2040_EXT_CH;
 	}
 	REG_WRITE(ah, AR_PHY_TURBO, phymode);
 
-	ath9k_hw_set11nmac2040(ah, macmode);
+	ath9k_hw_set11nmac2040(ah);
 
 	REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
 	REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
@@ -1810,17 +1865,19 @@
 }
 
 static bool ath9k_hw_channel_change(struct ath_hw *ah,
-				    struct ath9k_channel *chan,
-				    enum ath9k_ht_macmode macmode)
+				    struct ath9k_channel *chan)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_channel *channel = chan->chan;
 	u32 synthDelay, qnum;
+	int r;
 
 	for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
 		if (ath9k_hw_numtxpending(ah, qnum)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"Transmit frames pending on queue %d\n", qnum);
+			ath_print(common, ATH_DBG_QUEUE,
+				  "Transmit frames pending on "
+				  "queue %d\n", qnum);
 			return false;
 		}
 	}
@@ -1828,21 +1885,18 @@
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
 	if (!ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
 			   AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Could not kill baseband RX\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Could not kill baseband RX\n");
 		return false;
 	}
 
-	ath9k_hw_set_regs(ah, chan, macmode);
+	ath9k_hw_set_regs(ah, chan);
 
-	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		ath9k_hw_ar9280_set_channel(ah, chan);
-	} else {
-		if (!(ath9k_hw_set_channel(ah, chan))) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Failed to set channel\n");
-			return false;
-		}
+	r = ah->ath9k_hw_rf_set_freq(ah, chan);
+	if (r) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to set channel\n");
+		return false;
 	}
 
 	ah->eep_ops->set_txpower(ah, chan,
@@ -1865,10 +1919,7 @@
 	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
 		ath9k_hw_set_delta_slope(ah, chan);
 
-	if (AR_SREV_9280_10_OR_LATER(ah))
-		ath9k_hw_9280_spur_mitigate(ah, chan);
-	else
-		ath9k_hw_spur_mitigate(ah, chan);
+	ah->ath9k_hw_spur_mitigate_freq(ah, chan);
 
 	if (!chan->oneTimeCalsDone)
 		chan->oneTimeCalsDone = true;
@@ -1876,457 +1927,6 @@
 	return true;
 }
 
-static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	int bb_spur = AR_NO_SPUR;
-	int freq;
-	int bin, cur_bin;
-	int bb_spur_off, spur_subchannel_sd;
-	int spur_freq_sd;
-	int spur_delta_phase;
-	int denominator;
-	int upper, lower, cur_vit_mask;
-	int tmp, newVal;
-	int i;
-	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
-			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
-	};
-	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
-			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
-	};
-	int inc[4] = { 0, 100, 0, 0 };
-	struct chan_centers centers;
-
-	int8_t mask_m[123];
-	int8_t mask_p[123];
-	int8_t mask_amt;
-	int tmp_mask;
-	int cur_bb_spur;
-	bool is2GHz = IS_CHAN_2GHZ(chan);
-
-	memset(&mask_m, 0, sizeof(int8_t) * 123);
-	memset(&mask_p, 0, sizeof(int8_t) * 123);
-
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-	freq = centers.synth_center;
-
-	ah->config.spurmode = SPUR_ENABLE_EEPROM;
-	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
-		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
-
-		if (is2GHz)
-			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
-		else
-			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
-
-		if (AR_NO_SPUR == cur_bb_spur)
-			break;
-		cur_bb_spur = cur_bb_spur - freq;
-
-		if (IS_CHAN_HT40(chan)) {
-			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
-			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
-				bb_spur = cur_bb_spur;
-				break;
-			}
-		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
-			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
-			bb_spur = cur_bb_spur;
-			break;
-		}
-	}
-
-	if (AR_NO_SPUR == bb_spur) {
-		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
-			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
-		return;
-	} else {
-		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
-			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
-	}
-
-	bin = bb_spur * 320;
-
-	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
-
-	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
-			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
-			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
-			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
-	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
-
-	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
-		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
-		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
-		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
-		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
-	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
-
-	if (IS_CHAN_HT40(chan)) {
-		if (bb_spur < 0) {
-			spur_subchannel_sd = 1;
-			bb_spur_off = bb_spur + 10;
-		} else {
-			spur_subchannel_sd = 0;
-			bb_spur_off = bb_spur - 10;
-		}
-	} else {
-		spur_subchannel_sd = 0;
-		bb_spur_off = bb_spur;
-	}
-
-	if (IS_CHAN_HT40(chan))
-		spur_delta_phase =
-			((bb_spur * 262144) /
-			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
-	else
-		spur_delta_phase =
-			((bb_spur * 524288) /
-			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
-
-	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
-	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
-
-	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
-		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
-		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
-	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
-
-	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
-	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
-
-	cur_bin = -6000;
-	upper = bin + 100;
-	lower = bin - 100;
-
-	for (i = 0; i < 4; i++) {
-		int pilot_mask = 0;
-		int chan_mask = 0;
-		int bp = 0;
-		for (bp = 0; bp < 30; bp++) {
-			if ((cur_bin > lower) && (cur_bin < upper)) {
-				pilot_mask = pilot_mask | 0x1 << bp;
-				chan_mask = chan_mask | 0x1 << bp;
-			}
-			cur_bin += 100;
-		}
-		cur_bin += inc[i];
-		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
-		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
-	}
-
-	cur_vit_mask = 6100;
-	upper = bin + 120;
-	lower = bin - 120;
-
-	for (i = 0; i < 123; i++) {
-		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
-
-			/* workaround for gcc bug #37014 */
-			volatile int tmp_v = abs(cur_vit_mask - bin);
-
-			if (tmp_v < 75)
-				mask_amt = 1;
-			else
-				mask_amt = 0;
-			if (cur_vit_mask < 0)
-				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
-			else
-				mask_p[cur_vit_mask / 100] = mask_amt;
-		}
-		cur_vit_mask -= 100;
-	}
-
-	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
-		| (mask_m[48] << 26) | (mask_m[49] << 24)
-		| (mask_m[50] << 22) | (mask_m[51] << 20)
-		| (mask_m[52] << 18) | (mask_m[53] << 16)
-		| (mask_m[54] << 14) | (mask_m[55] << 12)
-		| (mask_m[56] << 10) | (mask_m[57] << 8)
-		| (mask_m[58] << 6) | (mask_m[59] << 4)
-		| (mask_m[60] << 2) | (mask_m[61] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
-
-	tmp_mask = (mask_m[31] << 28)
-		| (mask_m[32] << 26) | (mask_m[33] << 24)
-		| (mask_m[34] << 22) | (mask_m[35] << 20)
-		| (mask_m[36] << 18) | (mask_m[37] << 16)
-		| (mask_m[48] << 14) | (mask_m[39] << 12)
-		| (mask_m[40] << 10) | (mask_m[41] << 8)
-		| (mask_m[42] << 6) | (mask_m[43] << 4)
-		| (mask_m[44] << 2) | (mask_m[45] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
-
-	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
-		| (mask_m[18] << 26) | (mask_m[18] << 24)
-		| (mask_m[20] << 22) | (mask_m[20] << 20)
-		| (mask_m[22] << 18) | (mask_m[22] << 16)
-		| (mask_m[24] << 14) | (mask_m[24] << 12)
-		| (mask_m[25] << 10) | (mask_m[26] << 8)
-		| (mask_m[27] << 6) | (mask_m[28] << 4)
-		| (mask_m[29] << 2) | (mask_m[30] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
-
-	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
-		| (mask_m[2] << 26) | (mask_m[3] << 24)
-		| (mask_m[4] << 22) | (mask_m[5] << 20)
-		| (mask_m[6] << 18) | (mask_m[7] << 16)
-		| (mask_m[8] << 14) | (mask_m[9] << 12)
-		| (mask_m[10] << 10) | (mask_m[11] << 8)
-		| (mask_m[12] << 6) | (mask_m[13] << 4)
-		| (mask_m[14] << 2) | (mask_m[15] << 0);
-	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
-
-	tmp_mask = (mask_p[15] << 28)
-		| (mask_p[14] << 26) | (mask_p[13] << 24)
-		| (mask_p[12] << 22) | (mask_p[11] << 20)
-		| (mask_p[10] << 18) | (mask_p[9] << 16)
-		| (mask_p[8] << 14) | (mask_p[7] << 12)
-		| (mask_p[6] << 10) | (mask_p[5] << 8)
-		| (mask_p[4] << 6) | (mask_p[3] << 4)
-		| (mask_p[2] << 2) | (mask_p[1] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
-
-	tmp_mask = (mask_p[30] << 28)
-		| (mask_p[29] << 26) | (mask_p[28] << 24)
-		| (mask_p[27] << 22) | (mask_p[26] << 20)
-		| (mask_p[25] << 18) | (mask_p[24] << 16)
-		| (mask_p[23] << 14) | (mask_p[22] << 12)
-		| (mask_p[21] << 10) | (mask_p[20] << 8)
-		| (mask_p[19] << 6) | (mask_p[18] << 4)
-		| (mask_p[17] << 2) | (mask_p[16] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
-
-	tmp_mask = (mask_p[45] << 28)
-		| (mask_p[44] << 26) | (mask_p[43] << 24)
-		| (mask_p[42] << 22) | (mask_p[41] << 20)
-		| (mask_p[40] << 18) | (mask_p[39] << 16)
-		| (mask_p[38] << 14) | (mask_p[37] << 12)
-		| (mask_p[36] << 10) | (mask_p[35] << 8)
-		| (mask_p[34] << 6) | (mask_p[33] << 4)
-		| (mask_p[32] << 2) | (mask_p[31] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
-
-	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
-		| (mask_p[59] << 26) | (mask_p[58] << 24)
-		| (mask_p[57] << 22) | (mask_p[56] << 20)
-		| (mask_p[55] << 18) | (mask_p[54] << 16)
-		| (mask_p[53] << 14) | (mask_p[52] << 12)
-		| (mask_p[51] << 10) | (mask_p[50] << 8)
-		| (mask_p[49] << 6) | (mask_p[48] << 4)
-		| (mask_p[47] << 2) | (mask_p[46] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
-}
-
-static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	int bb_spur = AR_NO_SPUR;
-	int bin, cur_bin;
-	int spur_freq_sd;
-	int spur_delta_phase;
-	int denominator;
-	int upper, lower, cur_vit_mask;
-	int tmp, new;
-	int i;
-	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
-			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
-	};
-	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
-			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
-	};
-	int inc[4] = { 0, 100, 0, 0 };
-
-	int8_t mask_m[123];
-	int8_t mask_p[123];
-	int8_t mask_amt;
-	int tmp_mask;
-	int cur_bb_spur;
-	bool is2GHz = IS_CHAN_2GHZ(chan);
-
-	memset(&mask_m, 0, sizeof(int8_t) * 123);
-	memset(&mask_p, 0, sizeof(int8_t) * 123);
-
-	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
-		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
-		if (AR_NO_SPUR == cur_bb_spur)
-			break;
-		cur_bb_spur = cur_bb_spur - (chan->channel * 10);
-		if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
-			bb_spur = cur_bb_spur;
-			break;
-		}
-	}
-
-	if (AR_NO_SPUR == bb_spur)
-		return;
-
-	bin = bb_spur * 32;
-
-	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
-	new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
-		     AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
-		     AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
-		     AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
-
-	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
-
-	new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
-	       AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
-	       AR_PHY_SPUR_REG_MASK_RATE_SELECT |
-	       AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
-	       SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
-	REG_WRITE(ah, AR_PHY_SPUR_REG, new);
-
-	spur_delta_phase = ((bb_spur * 524288) / 100) &
-		AR_PHY_TIMING11_SPUR_DELTA_PHASE;
-
-	denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
-	spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
-
-	new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
-	       SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
-	       SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
-	REG_WRITE(ah, AR_PHY_TIMING11, new);
-
-	cur_bin = -6000;
-	upper = bin + 100;
-	lower = bin - 100;
-
-	for (i = 0; i < 4; i++) {
-		int pilot_mask = 0;
-		int chan_mask = 0;
-		int bp = 0;
-		for (bp = 0; bp < 30; bp++) {
-			if ((cur_bin > lower) && (cur_bin < upper)) {
-				pilot_mask = pilot_mask | 0x1 << bp;
-				chan_mask = chan_mask | 0x1 << bp;
-			}
-			cur_bin += 100;
-		}
-		cur_bin += inc[i];
-		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
-		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
-	}
-
-	cur_vit_mask = 6100;
-	upper = bin + 120;
-	lower = bin - 120;
-
-	for (i = 0; i < 123; i++) {
-		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
-
-			/* workaround for gcc bug #37014 */
-			volatile int tmp_v = abs(cur_vit_mask - bin);
-
-			if (tmp_v < 75)
-				mask_amt = 1;
-			else
-				mask_amt = 0;
-			if (cur_vit_mask < 0)
-				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
-			else
-				mask_p[cur_vit_mask / 100] = mask_amt;
-		}
-		cur_vit_mask -= 100;
-	}
-
-	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
-		| (mask_m[48] << 26) | (mask_m[49] << 24)
-		| (mask_m[50] << 22) | (mask_m[51] << 20)
-		| (mask_m[52] << 18) | (mask_m[53] << 16)
-		| (mask_m[54] << 14) | (mask_m[55] << 12)
-		| (mask_m[56] << 10) | (mask_m[57] << 8)
-		| (mask_m[58] << 6) | (mask_m[59] << 4)
-		| (mask_m[60] << 2) | (mask_m[61] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
-
-	tmp_mask = (mask_m[31] << 28)
-		| (mask_m[32] << 26) | (mask_m[33] << 24)
-		| (mask_m[34] << 22) | (mask_m[35] << 20)
-		| (mask_m[36] << 18) | (mask_m[37] << 16)
-		| (mask_m[48] << 14) | (mask_m[39] << 12)
-		| (mask_m[40] << 10) | (mask_m[41] << 8)
-		| (mask_m[42] << 6) | (mask_m[43] << 4)
-		| (mask_m[44] << 2) | (mask_m[45] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
-
-	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
-		| (mask_m[18] << 26) | (mask_m[18] << 24)
-		| (mask_m[20] << 22) | (mask_m[20] << 20)
-		| (mask_m[22] << 18) | (mask_m[22] << 16)
-		| (mask_m[24] << 14) | (mask_m[24] << 12)
-		| (mask_m[25] << 10) | (mask_m[26] << 8)
-		| (mask_m[27] << 6) | (mask_m[28] << 4)
-		| (mask_m[29] << 2) | (mask_m[30] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
-
-	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
-		| (mask_m[2] << 26) | (mask_m[3] << 24)
-		| (mask_m[4] << 22) | (mask_m[5] << 20)
-		| (mask_m[6] << 18) | (mask_m[7] << 16)
-		| (mask_m[8] << 14) | (mask_m[9] << 12)
-		| (mask_m[10] << 10) | (mask_m[11] << 8)
-		| (mask_m[12] << 6) | (mask_m[13] << 4)
-		| (mask_m[14] << 2) | (mask_m[15] << 0);
-	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
-
-	tmp_mask = (mask_p[15] << 28)
-		| (mask_p[14] << 26) | (mask_p[13] << 24)
-		| (mask_p[12] << 22) | (mask_p[11] << 20)
-		| (mask_p[10] << 18) | (mask_p[9] << 16)
-		| (mask_p[8] << 14) | (mask_p[7] << 12)
-		| (mask_p[6] << 10) | (mask_p[5] << 8)
-		| (mask_p[4] << 6) | (mask_p[3] << 4)
-		| (mask_p[2] << 2) | (mask_p[1] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
-
-	tmp_mask = (mask_p[30] << 28)
-		| (mask_p[29] << 26) | (mask_p[28] << 24)
-		| (mask_p[27] << 22) | (mask_p[26] << 20)
-		| (mask_p[25] << 18) | (mask_p[24] << 16)
-		| (mask_p[23] << 14) | (mask_p[22] << 12)
-		| (mask_p[21] << 10) | (mask_p[20] << 8)
-		| (mask_p[19] << 6) | (mask_p[18] << 4)
-		| (mask_p[17] << 2) | (mask_p[16] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
-
-	tmp_mask = (mask_p[45] << 28)
-		| (mask_p[44] << 26) | (mask_p[43] << 24)
-		| (mask_p[42] << 22) | (mask_p[41] << 20)
-		| (mask_p[40] << 18) | (mask_p[39] << 16)
-		| (mask_p[38] << 14) | (mask_p[37] << 12)
-		| (mask_p[36] << 10) | (mask_p[35] << 8)
-		| (mask_p[34] << 6) | (mask_p[33] << 4)
-		| (mask_p[32] << 2) | (mask_p[31] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
-
-	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
-		| (mask_p[59] << 26) | (mask_p[58] << 24)
-		| (mask_p[57] << 22) | (mask_p[56] << 20)
-		| (mask_p[55] << 18) | (mask_p[54] << 16)
-		| (mask_p[53] << 14) | (mask_p[52] << 12)
-		| (mask_p[51] << 10) | (mask_p[50] << 8)
-		| (mask_p[49] << 6) | (mask_p[48] << 4)
-		| (mask_p[47] << 2) | (mask_p[46] << 0);
-	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
-	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
-}
-
 static void ath9k_enable_rfkill(struct ath_hw *ah)
 {
 	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
@@ -2342,17 +1942,16 @@
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		    bool bChannelChange)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 saveLedState;
-	struct ath_softc *sc = ah->ah_sc;
 	struct ath9k_channel *curchan = ah->curchan;
 	u32 saveDefAntenna;
 	u32 macStaId1;
 	u64 tsf = 0;
 	int i, rx_chainmask, r;
 
-	ah->extprotspacing = sc->ht_extprotspacing;
-	ah->txchainmask = sc->tx_chainmask;
-	ah->rxchainmask = sc->rx_chainmask;
+	ah->txchainmask = common->tx_chainmask;
+	ah->rxchainmask = common->rx_chainmask;
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
@@ -2369,7 +1968,7 @@
 	     !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) ||
 	     IS_CHAN_A_5MHZ_SPACED(ah->curchan))) {
 
-		if (ath9k_hw_channel_change(ah, chan, sc->tx_chan_width)) {
+		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
 			ath9k_hw_start_nfcal(ah);
 			return 0;
@@ -2400,7 +1999,7 @@
 	}
 
 	if (!ath9k_hw_chip_reset(ah, chan)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Chip reset failed\n");
+		ath_print(common, ATH_DBG_FATAL, "Chip reset failed\n");
 		return -EINVAL;
 	}
 
@@ -2429,7 +2028,7 @@
 		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
 				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
 	}
-	r = ath9k_hw_process_ini(ah, chan, sc->tx_chan_width);
+	r = ath9k_hw_process_ini(ah, chan);
 	if (r)
 		return r;
 
@@ -2453,17 +2052,11 @@
 	if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan))
 		ath9k_hw_set_delta_slope(ah, chan);
 
-	if (AR_SREV_9280_10_OR_LATER(ah))
-		ath9k_hw_9280_spur_mitigate(ah, chan);
-	else
-		ath9k_hw_spur_mitigate(ah, chan);
-
+	ah->ath9k_hw_spur_mitigate_freq(ah, chan);
 	ah->eep_ops->set_board_values(ah, chan);
 
-	ath9k_hw_decrease_chain_power(ah, chan);
-
-	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(ah->macaddr));
-	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(ah->macaddr + 4)
+	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(common->macaddr));
+	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(common->macaddr + 4)
 		  | macStaId1
 		  | AR_STA_ID1_RTS_USE_DEF
 		  | (ah->config.
@@ -2471,24 +2064,19 @@
 		  | ah->sta_id1_defaults);
 	ath9k_hw_set_operating_mode(ah, ah->opmode);
 
-	REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(sc->bssidmask));
-	REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(sc->bssidmask + 4));
+	ath_hw_setbssidmask(common);
 
 	REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
 
-	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(sc->curbssid));
-	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(sc->curbssid + 4) |
-		  ((sc->curaid & 0x3fff) << AR_BSS_ID1_AID_S));
+	ath9k_hw_write_associd(ah);
 
 	REG_WRITE(ah, AR_ISR, ~0);
 
 	REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR);
 
-	if (AR_SREV_9280_10_OR_LATER(ah))
-		ath9k_hw_ar9280_set_channel(ah, chan);
-	else
-		if (!(ath9k_hw_set_channel(ah, chan)))
-			return -EIO;
+	r = ah->ath9k_hw_rf_set_freq(ah, chan);
+	if (r)
+		return r;
 
 	for (i = 0; i < AR_NUM_DCU; i++)
 		REG_WRITE(ah, AR_DQCUMASK(i), 1 << i);
@@ -2558,13 +2146,13 @@
 		u32 mask;
 		mask = REG_READ(ah, AR_CFG);
 		if (mask & (AR_CFG_SWRB | AR_CFG_SWTB | AR_CFG_SWRG)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			ath_print(common, ATH_DBG_RESET,
 				"CFG Byte Swap Set 0x%x\n", mask);
 		} else {
 			mask =
 				INIT_CONFIG_STATUS | AR_CFG_SWRB | AR_CFG_SWTB;
 			REG_WRITE(ah, AR_CFG, mask);
-			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			ath_print(common, ATH_DBG_RESET,
 				"Setting CFG 0x%x\n", REG_READ(ah, AR_CFG));
 		}
 	} else {
@@ -2577,11 +2165,12 @@
 #endif
 	}
 
-	if (ah->ah_sc->sc_flags & SC_OP_BTCOEX_ENABLED)
+	if (ah->btcoex_hw.enabled)
 		ath9k_hw_btcoex_enable(ah);
 
 	return 0;
 }
+EXPORT_SYMBOL(ath9k_hw_reset);
 
 /************************/
 /* Key Cache Management */
@@ -2592,8 +2181,8 @@
 	u32 keyType;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"keychache entry %u out of range\n", entry);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2620,14 +2209,15 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_keyreset);
 
 bool ath9k_hw_keysetmac(struct ath_hw *ah, u16 entry, const u8 *mac)
 {
 	u32 macHi, macLo;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"keychache entry %u out of range\n", entry);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2648,18 +2238,20 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_keysetmac);
 
 bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 				 const struct ath9k_keyval *k,
 				 const u8 *mac)
 {
 	const struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 key0, key1, key2, key3, key4;
 	u32 keyType;
 
 	if (entry >= pCap->keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"keycache entry %u out of range\n", entry);
+		ath_print(common, ATH_DBG_FATAL,
+			  "keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2669,9 +2261,9 @@
 		break;
 	case ATH9K_CIPHER_AES_CCM:
 		if (!(pCap->hw_caps & ATH9K_HW_CAP_CIPHER_AESCCM)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-				"AES-CCM not supported by mac rev 0x%x\n",
-				ah->hw_version.macRev);
+			ath_print(common, ATH_DBG_ANY,
+				  "AES-CCM not supported by mac rev 0x%x\n",
+				  ah->hw_version.macRev);
 			return false;
 		}
 		keyType = AR_KEYTABLE_TYPE_CCM;
@@ -2680,15 +2272,15 @@
 		keyType = AR_KEYTABLE_TYPE_TKIP;
 		if (ATH9K_IS_MIC_ENABLED(ah)
 		    && entry + 64 >= pCap->keycache_size) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-				"entry %u inappropriate for TKIP\n", entry);
+			ath_print(common, ATH_DBG_ANY,
+				  "entry %u inappropriate for TKIP\n", entry);
 			return false;
 		}
 		break;
 	case ATH9K_CIPHER_WEP:
 		if (k->kv_len < WLAN_KEY_LEN_WEP40) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-				"WEP key length %u too small\n", k->kv_len);
+			ath_print(common, ATH_DBG_ANY,
+				  "WEP key length %u too small\n", k->kv_len);
 			return false;
 		}
 		if (k->kv_len <= WLAN_KEY_LEN_WEP40)
@@ -2702,8 +2294,8 @@
 		keyType = AR_KEYTABLE_TYPE_CLR;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"cipher %u not supported\n", k->kv_type);
+		ath_print(common, ATH_DBG_FATAL,
+			  "cipher %u not supported\n", k->kv_type);
 		return false;
 	}
 
@@ -2845,6 +2437,7 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_set_keycache_entry);
 
 bool ath9k_hw_keyisvalid(struct ath_hw *ah, u16 entry)
 {
@@ -2855,6 +2448,7 @@
 	}
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_keyisvalid);
 
 /******************************/
 /* Power Management (Chipset) */
@@ -2869,8 +2463,9 @@
 		if (!AR_SREV_9100(ah))
 			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
 
-		REG_CLR_BIT(ah, (AR_RTC_RESET),
-			    AR_RTC_RESET_EN);
+		if(!AR_SREV_5416(ah))
+			REG_CLR_BIT(ah, (AR_RTC_RESET),
+				    AR_RTC_RESET_EN);
 	}
 }
 
@@ -2902,6 +2497,7 @@
 					   ATH9K_RESET_POWER_ON) != true) {
 				return false;
 			}
+			ath9k_hw_init_pll(ah, NULL);
 		}
 		if (AR_SREV_9100(ah))
 			REG_SET_BIT(ah, AR_RTC_RESET,
@@ -2920,8 +2516,9 @@
 				    AR_RTC_FORCE_WAKE_EN);
 		}
 		if (i == 0) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Failed to wakeup in %uus\n", POWER_UP_TIME / 20);
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "Failed to wakeup in %uus\n",
+				  POWER_UP_TIME / 20);
 			return false;
 		}
 	}
@@ -2931,9 +2528,9 @@
 	return true;
 }
 
-static bool ath9k_hw_setpower_nolock(struct ath_hw *ah,
-				     enum ath9k_power_mode mode)
+bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int status = true, setChip = true;
 	static const char *modes[] = {
 		"AWAKE",
@@ -2945,8 +2542,8 @@
 	if (ah->power_mode == mode)
 		return status;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s -> %s\n",
-		modes[ah->power_mode], modes[mode]);
+	ath_print(common, ATH_DBG_RESET, "%s -> %s\n",
+		  modes[ah->power_mode], modes[mode]);
 
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
@@ -2960,59 +2557,15 @@
 		ath9k_set_power_network_sleep(ah, setChip);
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Unknown power mode %u\n", mode);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unknown power mode %u\n", mode);
 		return false;
 	}
 	ah->power_mode = mode;
 
 	return status;
 }
-
-bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
-{
-	unsigned long flags;
-	bool ret;
-
-	spin_lock_irqsave(&ah->ah_sc->sc_pm_lock, flags);
-	ret = ath9k_hw_setpower_nolock(ah, mode);
-	spin_unlock_irqrestore(&ah->ah_sc->sc_pm_lock, flags);
-
-	return ret;
-}
-
-void ath9k_ps_wakeup(struct ath_softc *sc)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sc->sc_pm_lock, flags);
-	if (++sc->ps_usecount != 1)
-		goto unlock;
-
-	ath9k_hw_setpower_nolock(sc->sc_ah, ATH9K_PM_AWAKE);
-
- unlock:
-	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
-}
-
-void ath9k_ps_restore(struct ath_softc *sc)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sc->sc_pm_lock, flags);
-	if (--sc->ps_usecount != 0)
-		goto unlock;
-
-	if (sc->ps_enabled &&
-	    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
-			      SC_OP_WAIT_FOR_CAB |
-			      SC_OP_WAIT_FOR_PSPOLL_DATA |
-			      SC_OP_WAIT_FOR_TX_ACK)))
-		ath9k_hw_setpower_nolock(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
-
- unlock:
-	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
-}
+EXPORT_SYMBOL(ath9k_hw_setpower);
 
 /*
  * Helper for ASPM support.
@@ -3145,6 +2698,7 @@
 		}
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_configpcipowersave);
 
 /**********************/
 /* Interrupt Handling */
@@ -3168,6 +2722,7 @@
 
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_intrpend);
 
 bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 {
@@ -3176,6 +2731,7 @@
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	u32 sync_cause = 0;
 	bool fatal_int = false;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (!AR_SREV_9100(ah)) {
 		if (REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) {
@@ -3249,8 +2805,8 @@
 		}
 
 		if (isr & AR_ISR_RXORN) {
-			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-				"receive FIFO overrun interrupt\n");
+			ath_print(common, ATH_DBG_INTERRUPT,
+				  "receive FIFO overrun interrupt\n");
 		}
 
 		if (!AR_SREV_9100(ah)) {
@@ -3292,25 +2848,25 @@
 
 		if (fatal_int) {
 			if (sync_cause & AR_INTR_SYNC_HOST1_FATAL) {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-					"received PCI FATAL interrupt\n");
+				ath_print(common, ATH_DBG_ANY,
+					  "received PCI FATAL interrupt\n");
 			}
 			if (sync_cause & AR_INTR_SYNC_HOST1_PERR) {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-					"received PCI PERR interrupt\n");
+				ath_print(common, ATH_DBG_ANY,
+					  "received PCI PERR interrupt\n");
 			}
 			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
-			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-				"AR_INTR_SYNC_RADM_CPL_TIMEOUT\n");
+			ath_print(common, ATH_DBG_INTERRUPT,
+				  "AR_INTR_SYNC_RADM_CPL_TIMEOUT\n");
 			REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
 			REG_WRITE(ah, AR_RC, 0);
 			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT) {
-			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-				"AR_INTR_SYNC_LOCAL_TIMEOUT\n");
+			ath_print(common, ATH_DBG_INTERRUPT,
+				  "AR_INTR_SYNC_LOCAL_TIMEOUT\n");
 		}
 
 		REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
@@ -3319,17 +2875,19 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_getisr);
 
 enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
 {
 	u32 omask = ah->mask_reg;
 	u32 mask, mask2;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 
-	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
+	ath_print(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
 
 	if (omask & ATH9K_INT_GLOBAL) {
-		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "disable IER\n");
+		ath_print(common, ATH_DBG_INTERRUPT, "disable IER\n");
 		REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
 		(void) REG_READ(ah, AR_IER);
 		if (!AR_SREV_9100(ah)) {
@@ -3386,7 +2944,7 @@
 			mask2 |= AR_IMR_S2_CST;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "new IMR 0x%x\n", mask);
+	ath_print(common, ATH_DBG_INTERRUPT, "new IMR 0x%x\n", mask);
 	REG_WRITE(ah, AR_IMR, mask);
 	mask = REG_READ(ah, AR_IMR_S2) & ~(AR_IMR_S2_TIM |
 					   AR_IMR_S2_DTIM |
@@ -3406,7 +2964,7 @@
 	}
 
 	if (ints & ATH9K_INT_GLOBAL) {
-		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "enable IER\n");
+		ath_print(common, ATH_DBG_INTERRUPT, "enable IER\n");
 		REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
 		if (!AR_SREV_9100(ah)) {
 			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
@@ -3419,12 +2977,13 @@
 			REG_WRITE(ah, AR_INTR_SYNC_MASK,
 				  AR_INTR_SYNC_DEFAULT);
 		}
-		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
-			 REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
+		ath_print(common, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
+			  REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
 	}
 
 	return omask;
 }
+EXPORT_SYMBOL(ath9k_hw_set_interrupts);
 
 /*******************/
 /* Beacon Handling */
@@ -3467,9 +3026,9 @@
 			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_BEACON,
-			"%s: unsupported opmode: %d\n",
-			__func__, ah->opmode);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON,
+			  "%s: unsupported opmode: %d\n",
+			  __func__, ah->opmode);
 		return;
 		break;
 	}
@@ -3481,18 +3040,19 @@
 
 	beacon_period &= ~ATH9K_BEACON_ENA;
 	if (beacon_period & ATH9K_BEACON_RESET_TSF) {
-		beacon_period &= ~ATH9K_BEACON_RESET_TSF;
 		ath9k_hw_reset_tsf(ah);
 	}
 
 	REG_SET_BIT(ah, AR_TIMER_MODE, flags);
 }
+EXPORT_SYMBOL(ath9k_hw_beaconinit);
 
 void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 				    const struct ath9k_beacon_state *bs)
 {
 	u32 nextTbtt, beaconintval, dtimperiod, beacontimeout;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
 
@@ -3518,10 +3078,10 @@
 	else
 		nextTbtt = bs->bs_nexttbtt;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "next DTIM %d\n", bs->bs_nextdtim);
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "next beacon %d\n", nextTbtt);
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "beacon period %d\n", beaconintval);
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "DTIM period %d\n", dtimperiod);
+	ath_print(common, ATH_DBG_BEACON, "next DTIM %d\n", bs->bs_nextdtim);
+	ath_print(common, ATH_DBG_BEACON, "next beacon %d\n", nextTbtt);
+	ath_print(common, ATH_DBG_BEACON, "beacon period %d\n", beaconintval);
+	ath_print(common, ATH_DBG_BEACON, "DTIM period %d\n", dtimperiod);
 
 	REG_WRITE(ah, AR_NEXT_DTIM,
 		  TU_TO_USEC(bs->bs_nextdtim - SLEEP_SLOP));
@@ -3549,16 +3109,18 @@
 	/* TSF Out of Range Threshold */
 	REG_WRITE(ah, AR_TSFOOR_THRESHOLD, bs->bs_tsfoor_threshold);
 }
+EXPORT_SYMBOL(ath9k_hw_set_sta_beacon_timers);
 
 /*******************/
 /* HW Capabilities */
 /*******************/
 
-void ath9k_hw_fill_cap_info(struct ath_hw *ah)
+int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
 	u16 capField = 0, eeval;
 
@@ -3579,11 +3141,17 @@
 			regulatory->current_rd += 5;
 		else if (regulatory->current_rd == 0x41)
 			regulatory->current_rd = 0x43;
-		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-			"regdomain mapped to 0x%x\n", regulatory->current_rd);
+		ath_print(common, ATH_DBG_REGULATORY,
+			  "regdomain mapped to 0x%x\n", regulatory->current_rd);
 	}
 
 	eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
+	if ((eeval & (AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A)) == 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "no band has been marked as supported in EEPROM.\n");
+		return -EINVAL;
+	}
+
 	bitmap_zero(pCap->wireless_modes, ATH9K_MODE_MAX);
 
 	if (eeval & AR5416_OPFLAGS_11A) {
@@ -3670,7 +3238,11 @@
 		pCap->keycache_size = AR_KEYTABLE_SIZE;
 
 	pCap->hw_caps |= ATH9K_HW_CAP_FASTCC;
-	pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
+
+	if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
+		pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD >> 1;
+	else
+		pCap->tx_triglevel_max = MAX_TX_FIFO_THRESHOLD;
 
 	if (AR_SREV_9285_10_OR_LATER(ah))
 		pCap->num_gpio_pins = AR9285_NUM_GPIO;
@@ -3719,7 +3291,10 @@
 			AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
 	}
 
-	pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
+	/* Advertise midband for AR5416 with FCC midband set in eeprom */
+	if (regulatory->current_rd_ext & (1 << REG_EXT_FCC_MIDBAND) &&
+	    AR_SREV_5416(ah))
+		pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
 
 	pCap->num_antcfg_5ghz =
 		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_5GHZ);
@@ -3727,19 +3302,21 @@
 		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_2GHZ);
 
 	if (AR_SREV_9280_10_OR_LATER(ah) &&
-	    ath_btcoex_supported(ah->hw_version.subsysid)) {
-		btcoex_info->btactive_gpio = ATH_BTACTIVE_GPIO;
-		btcoex_info->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
+	    ath9k_hw_btcoex_supported(ah)) {
+		btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO;
+		btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
 
 		if (AR_SREV_9285(ah)) {
-			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_3WIRE;
-			btcoex_info->btpriority_gpio = ATH_BTPRIORITY_GPIO;
+			btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
+			btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO;
 		} else {
-			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_2WIRE;
+			btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE;
 		}
 	} else {
-		btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_NONE;
+		btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
 	}
+
+	return 0;
 }
 
 bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
@@ -3812,6 +3389,7 @@
 		return false;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_getcapability);
 
 bool ath9k_hw_setcapability(struct ath_hw *ah, enum ath9k_capability_type type,
 			    u32 capability, u32 setting, int *status)
@@ -3845,6 +3423,7 @@
 		return false;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_setcapability);
 
 /****************************/
 /* GPIO / RFKILL / Antennae */
@@ -3882,7 +3461,7 @@
 {
 	u32 gpio_shift;
 
-	ASSERT(gpio < ah->caps.num_gpio_pins);
+	BUG_ON(gpio >= ah->caps.num_gpio_pins);
 
 	gpio_shift = gpio << 1;
 
@@ -3891,6 +3470,7 @@
 		(AR_GPIO_OE_OUT_DRV_NO << gpio_shift),
 		(AR_GPIO_OE_OUT_DRV << gpio_shift));
 }
+EXPORT_SYMBOL(ath9k_hw_cfg_gpio_input);
 
 u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio)
 {
@@ -3909,6 +3489,7 @@
 	else
 		return MS_REG_READ(AR, gpio) != 0;
 }
+EXPORT_SYMBOL(ath9k_hw_gpio_get);
 
 void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
 			 u32 ah_signal_type)
@@ -3924,67 +3505,26 @@
 		(AR_GPIO_OE_OUT_DRV_ALL << gpio_shift),
 		(AR_GPIO_OE_OUT_DRV << gpio_shift));
 }
+EXPORT_SYMBOL(ath9k_hw_cfg_output);
 
 void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val)
 {
 	REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
 		AR_GPIO_BIT(gpio));
 }
+EXPORT_SYMBOL(ath9k_hw_set_gpio);
 
 u32 ath9k_hw_getdefantenna(struct ath_hw *ah)
 {
 	return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
 }
+EXPORT_SYMBOL(ath9k_hw_getdefantenna);
 
 void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna)
 {
 	REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
 }
-
-bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
-			       enum ath9k_ant_setting settings,
-			       struct ath9k_channel *chan,
-			       u8 *tx_chainmask,
-			       u8 *rx_chainmask,
-			       u8 *antenna_cfgd)
-{
-	static u8 tx_chainmask_cfg, rx_chainmask_cfg;
-
-	if (AR_SREV_9280(ah)) {
-		if (!tx_chainmask_cfg) {
-
-			tx_chainmask_cfg = *tx_chainmask;
-			rx_chainmask_cfg = *rx_chainmask;
-		}
-
-		switch (settings) {
-		case ATH9K_ANT_FIXED_A:
-			*tx_chainmask = ATH9K_ANTENNA0_CHAINMASK;
-			*rx_chainmask = ATH9K_ANTENNA0_CHAINMASK;
-			*antenna_cfgd = true;
-			break;
-		case ATH9K_ANT_FIXED_B:
-			if (ah->caps.tx_chainmask >
-			    ATH9K_ANTENNA1_CHAINMASK) {
-				*tx_chainmask = ATH9K_ANTENNA1_CHAINMASK;
-			}
-			*rx_chainmask = ATH9K_ANTENNA1_CHAINMASK;
-			*antenna_cfgd = true;
-			break;
-		case ATH9K_ANT_VARIABLE:
-			*tx_chainmask = tx_chainmask_cfg;
-			*rx_chainmask = rx_chainmask_cfg;
-			*antenna_cfgd = true;
-			break;
-		default:
-			break;
-		}
-	} else {
-		ah->config.diversity_control = settings;
-	}
-
-	return true;
-}
+EXPORT_SYMBOL(ath9k_hw_setantenna);
 
 /*********************/
 /* General Operation */
@@ -4002,6 +3542,7 @@
 
 	return bits;
 }
+EXPORT_SYMBOL(ath9k_hw_getrxfilter);
 
 void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits)
 {
@@ -4023,19 +3564,30 @@
 		REG_WRITE(ah, AR_RXCFG,
 			  REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_ZLFDMA);
 }
+EXPORT_SYMBOL(ath9k_hw_setrxfilter);
 
 bool ath9k_hw_phy_disable(struct ath_hw *ah)
 {
-	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM);
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
+		return false;
+
+	ath9k_hw_init_pll(ah, NULL);
+	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_phy_disable);
 
 bool ath9k_hw_disable(struct ath_hw *ah)
 {
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return false;
 
-	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD);
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD))
+		return false;
+
+	ath9k_hw_init_pll(ah, NULL);
+	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_disable);
 
 void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
 {
@@ -4052,35 +3604,36 @@
 				 min((u32) MAX_RATE_POWER,
 				 (u32) regulatory->power_limit));
 }
+EXPORT_SYMBOL(ath9k_hw_set_txpowerlimit);
 
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac)
 {
-	memcpy(ah->macaddr, mac, ETH_ALEN);
+	memcpy(ath9k_hw_common(ah)->macaddr, mac, ETH_ALEN);
 }
+EXPORT_SYMBOL(ath9k_hw_setmac);
 
 void ath9k_hw_setopmode(struct ath_hw *ah)
 {
 	ath9k_hw_set_operating_mode(ah, ah->opmode);
 }
+EXPORT_SYMBOL(ath9k_hw_setopmode);
 
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1)
 {
 	REG_WRITE(ah, AR_MCAST_FIL0, filter0);
 	REG_WRITE(ah, AR_MCAST_FIL1, filter1);
 }
+EXPORT_SYMBOL(ath9k_hw_setmcastfilter);
 
-void ath9k_hw_setbssidmask(struct ath_softc *sc)
+void ath9k_hw_write_associd(struct ath_hw *ah)
 {
-	REG_WRITE(sc->sc_ah, AR_BSSMSKL, get_unaligned_le32(sc->bssidmask));
-	REG_WRITE(sc->sc_ah, AR_BSSMSKU, get_unaligned_le16(sc->bssidmask + 4));
-}
+	struct ath_common *common = ath9k_hw_common(ah);
 
-void ath9k_hw_write_associd(struct ath_softc *sc)
-{
-	REG_WRITE(sc->sc_ah, AR_BSS_ID0, get_unaligned_le32(sc->curbssid));
-	REG_WRITE(sc->sc_ah, AR_BSS_ID1, get_unaligned_le16(sc->curbssid + 4) |
-		  ((sc->curaid & 0x3fff) << AR_BSS_ID1_AID_S));
+	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(common->curbssid));
+	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(common->curbssid + 4) |
+		  ((common->curaid & 0x3fff) << AR_BSS_ID1_AID_S));
 }
+EXPORT_SYMBOL(ath9k_hw_write_associd);
 
 u64 ath9k_hw_gettsf64(struct ath_hw *ah)
 {
@@ -4091,24 +3644,25 @@
 
 	return tsf;
 }
+EXPORT_SYMBOL(ath9k_hw_gettsf64);
 
 void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64)
 {
 	REG_WRITE(ah, AR_TSF_L32, tsf64 & 0xffffffff);
 	REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
 }
+EXPORT_SYMBOL(ath9k_hw_settsf64);
 
 void ath9k_hw_reset_tsf(struct ath_hw *ah)
 {
-	ath9k_ps_wakeup(ah->ah_sc);
 	if (!ath9k_hw_wait(ah, AR_SLP32_MODE, AR_SLP32_TSF_WRITE_STATUS, 0,
 			   AH_TSF_WRITE_TIMEOUT))
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
-			"AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
 
 	REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE);
-	ath9k_ps_restore(ah->ah_sc);
 }
+EXPORT_SYMBOL(ath9k_hw_reset_tsf);
 
 void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting)
 {
@@ -4117,11 +3671,28 @@
 	else
 		ah->misc_mode &= ~AR_PCU_TX_ADD_TSF;
 }
+EXPORT_SYMBOL(ath9k_hw_set_tsfadjust);
+
+/*
+ *  Extend 15-bit time stamp from rx descriptor to
+ *  a full 64-bit TSF using the current h/w TSF.
+*/
+u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp)
+{
+	u64 tsf;
+
+	tsf = ath9k_hw_gettsf64(ah);
+	if ((tsf & 0x7fff) < rstamp)
+		tsf -= 0x8000;
+	return (tsf & ~0x7fff) | rstamp;
+}
+EXPORT_SYMBOL(ath9k_hw_extend_tsf);
 
 bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
 {
 	if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "bad slot time %u\n", us);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "bad slot time %u\n", us);
 		ah->slottime = (u32) -1;
 		return false;
 	} else {
@@ -4130,13 +3701,14 @@
 		return true;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_setslottime);
 
-void ath9k_hw_set11nmac2040(struct ath_hw *ah, enum ath9k_ht_macmode mode)
+void ath9k_hw_set11nmac2040(struct ath_hw *ah)
 {
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	u32 macmode;
 
-	if (mode == ATH9K_HT_MACMODE_2040 &&
-	    !ah->config.cwm_ignore_extcca)
+	if (conf_is_ht40(conf) && !ah->config.cwm_ignore_extcca)
 		macmode = AR_2040_JOINED_RX_CLEAR;
 	else
 		macmode = 0;
@@ -4193,6 +3765,7 @@
 {
 	return REG_READ(ah, AR_TSF_L32);
 }
+EXPORT_SYMBOL(ath9k_hw_gettsf32);
 
 struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 					  void (*trigger)(void *),
@@ -4206,8 +3779,9 @@
 	timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL);
 
 	if (timer == NULL) {
-		printk(KERN_DEBUG "Failed to allocate memory"
-		       "for hw timer[%d]\n", timer_index);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "Failed to allocate memory"
+			  "for hw timer[%d]\n", timer_index);
 		return NULL;
 	}
 
@@ -4220,10 +3794,12 @@
 
 	return timer;
 }
+EXPORT_SYMBOL(ath_gen_timer_alloc);
 
-void ath_gen_timer_start(struct ath_hw *ah,
-			 struct ath_gen_timer *timer,
-			 u32 timer_next, u32 timer_period)
+void ath9k_hw_gen_timer_start(struct ath_hw *ah,
+			      struct ath_gen_timer *timer,
+			      u32 timer_next,
+			      u32 timer_period)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 	u32 tsf;
@@ -4234,8 +3810,9 @@
 
 	tsf = ath9k_hw_gettsf32(ah);
 
-	DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER, "curent tsf %x period %x"
-		"timer_next %x\n", tsf, timer_period, timer_next);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_HWTIMER,
+		  "curent tsf %x period %x"
+		  "timer_next %x\n", tsf, timer_period, timer_next);
 
 	/*
 	 * Pull timer_next forward if the current TSF already passed it
@@ -4258,15 +3835,10 @@
 	REG_SET_BIT(ah, AR_IMR_S5,
 		(SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_THRESH) |
 		SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
-
-	if ((ah->ah_sc->imask & ATH9K_INT_GENTIMER) == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
-		ah->ah_sc->imask |= ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah, ah->ah_sc->imask);
-	}
 }
+EXPORT_SYMBOL(ath9k_hw_gen_timer_start);
 
-void ath_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
+void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 
@@ -4285,14 +3857,8 @@
 		SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
 
 	clear_bit(timer->index, &timer_table->timer_mask.timer_bits);
-
-	/* if no timer is enabled, turn off interrupt mask */
-	if (timer_table->timer_mask.val == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
-		ah->ah_sc->imask &= ~ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah, ah->ah_sc->imask);
-	}
 }
+EXPORT_SYMBOL(ath9k_hw_gen_timer_stop);
 
 void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer)
 {
@@ -4302,6 +3868,7 @@
 	timer_table->timers[timer->index] = NULL;
 	kfree(timer);
 }
+EXPORT_SYMBOL(ath_gen_timer_free);
 
 /*
  * Generic Timer Interrupts handling
@@ -4310,6 +3877,7 @@
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 	struct ath_gen_timer *timer;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 trigger_mask, thresh_mask, index;
 
 	/* get hardware generic timer interrupt status */
@@ -4324,8 +3892,8 @@
 		index = rightmost_index(timer_table, &thresh_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER,
-			"TSF overflow for Gen timer %d\n", index);
+		ath_print(common, ATH_DBG_HWTIMER,
+			  "TSF overflow for Gen timer %d\n", index);
 		timer->overflow(timer->arg);
 	}
 
@@ -4333,21 +3901,95 @@
 		index = rightmost_index(timer_table, &trigger_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER,
-			"Gen timer[%d] trigger\n", index);
+		ath_print(common, ATH_DBG_HWTIMER,
+			  "Gen timer[%d] trigger\n", index);
 		timer->trigger(timer->arg);
 	}
 }
+EXPORT_SYMBOL(ath_gen_timer_isr);
+
+static struct {
+	u32 version;
+	const char * name;
+} ath_mac_bb_names[] = {
+	/* Devices with external radios */
+	{ AR_SREV_VERSION_5416_PCI,	"5416" },
+	{ AR_SREV_VERSION_5416_PCIE,	"5418" },
+	{ AR_SREV_VERSION_9100,		"9100" },
+	{ AR_SREV_VERSION_9160,		"9160" },
+	/* Single-chip solutions */
+	{ AR_SREV_VERSION_9280,		"9280" },
+	{ AR_SREV_VERSION_9285,		"9285" },
+	{ AR_SREV_VERSION_9287,         "9287" },
+	{ AR_SREV_VERSION_9271,         "9271" },
+};
+
+/* For devices with external radios */
+static struct {
+	u16 version;
+	const char * name;
+} ath_rf_names[] = {
+	{ 0,				"5133" },
+	{ AR_RAD5133_SREV_MAJOR,	"5133" },
+	{ AR_RAD5122_SREV_MAJOR,	"5122" },
+	{ AR_RAD2133_SREV_MAJOR,	"2133" },
+	{ AR_RAD2122_SREV_MAJOR,	"2122" }
+};
 
 /*
- * Primitive to disable ASPM
+ * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
  */
-void ath_pcie_aspm_disable(struct ath_softc *sc)
+static const char *ath9k_hw_mac_bb_name(u32 mac_bb_version)
 {
-	struct pci_dev *pdev = to_pci_dev(sc->dev);
-	u8 aspm;
+	int i;
 
-	pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
-	aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
-	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
+	for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
+		if (ath_mac_bb_names[i].version == mac_bb_version) {
+			return ath_mac_bb_names[i].name;
+		}
+	}
+
+	return "????";
 }
+
+/*
+ * Return the RF name. "????" is returned if the RF is unknown.
+ * Used for devices with external radios.
+ */
+static const char *ath9k_hw_rf_name(u16 rf_version)
+{
+	int i;
+
+	for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
+		if (ath_rf_names[i].version == rf_version) {
+			return ath_rf_names[i].name;
+		}
+	}
+
+	return "????";
+}
+
+void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len)
+{
+	int used;
+
+	/* chipsets >= AR9280 are single-chip */
+	if (AR_SREV_9280_10_OR_LATER(ah)) {
+		used = snprintf(hw_name, len,
+			       "Atheros AR%s Rev:%x",
+			       ath9k_hw_mac_bb_name(ah->hw_version.macVersion),
+			       ah->hw_version.macRev);
+	}
+	else {
+		used = snprintf(hw_name, len,
+			       "Atheros AR%s MAC/BB Rev:%x AR%s RF Rev:%x",
+			       ath9k_hw_mac_bb_name(ah->hw_version.macVersion),
+			       ah->hw_version.macRev,
+			       ath9k_hw_rf_name((ah->hw_version.analog5GhzRev &
+						AR_RADIO_SREV_MAJOR)),
+			       ah->hw_version.phyRev);
+	}
+
+	hw_name[used] = '\0';
+}
+EXPORT_SYMBOL(ath9k_hw_name);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b892345..e2b0c73 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -27,17 +27,24 @@
 #include "calib.h"
 #include "reg.h"
 #include "phy.h"
+#include "btcoex.h"
 
 #include "../regd.h"
+#include "../debug.h"
 
 #define ATHEROS_VENDOR_ID	0x168c
+
 #define AR5416_DEVID_PCI	0x0023
 #define AR5416_DEVID_PCIE	0x0024
 #define AR9160_DEVID_PCI	0x0027
 #define AR9280_DEVID_PCI	0x0029
 #define AR9280_DEVID_PCIE	0x002a
 #define AR9285_DEVID_PCIE	0x002b
+
 #define AR5416_AR9100_DEVID	0x000b
+
+#define AR9271_USB             0x9271
+
 #define	AR_SUBVENDOR_ID_NOG	0x0e11
 #define AR_SUBVENDOR_ID_NEW_A	0x7065
 #define AR5416_MAGIC		0x19641014
@@ -49,9 +56,18 @@
 #define AT9285_COEX3WIRE_SA_SUBSYSID	0x30aa
 #define AT9285_COEX3WIRE_DA_SUBSYSID	0x30ab
 
+#define ATH_AMPDU_LIMIT_MAX        (64 * 1024 - 1)
+
+#define	ATH_DEFAULT_NOISE_FLOOR -95
+
+#define ATH9K_RSSI_BAD			-128
+
 /* Register read/write primitives */
-#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
-#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
+#define REG_WRITE(_ah, _reg, _val) \
+	ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))
+
+#define REG_READ(_ah, _reg) \
+	ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
 
 #define SM(_v, _f)  (((_v) << _f##_S) & _f)
 #define MS(_v, _f)  (((_v) & _f) >> _f##_S)
@@ -91,7 +107,7 @@
 #define AR_GPIO_BIT(_gpio)          (1 << (_gpio))
 
 #define BASE_ACTIVATE_DELAY         100
-#define RTC_PLL_SETTLE_DELAY        1000
+#define RTC_PLL_SETTLE_DELAY        100
 #define COEF_SCALE_S                24
 #define HT40_CHANNEL_CENTER_SHIFT   10
 
@@ -132,12 +148,6 @@
 	ATH9K_MODE_MAX,
 };
 
-enum ath9k_ant_setting {
-	ATH9K_ANT_VARIABLE = 0,
-	ATH9K_ANT_FIXED_A,
-	ATH9K_ANT_FIXED_B
-};
-
 enum ath9k_hw_caps {
 	ATH9K_HW_CAP_MIC_AESCCM                 = BIT(0),
 	ATH9K_HW_CAP_MIC_CKIP                   = BIT(1),
@@ -201,8 +211,6 @@
 	u32 cck_trig_high;
 	u32 cck_trig_low;
 	u32 enable_ani;
-	enum ath9k_ant_setting diversity_control;
-	u16 antenna_switch_swap;
 	int serialize_regmode;
 	bool intr_mitigation;
 #define SPUR_DISABLE        	0
@@ -218,6 +226,7 @@
 #define AR_SPUR_FEEQ_BOUND_HT20 10
 	int spurmode;
 	u16 spurchans[AR_EEPROM_MODAL_SPURS][2];
+	u8 max_txtrig_level;
 };
 
 enum ath9k_int {
@@ -407,7 +416,7 @@
  * Using de Bruijin sequence to to look up 1's index in a 32 bit number
  * debruijn32 = 0000 0111 0111 1100 1011 0101 0011 0001
  */
-#define debruijn32 0x077CB531UL
+#define debruijn32 0x077CB531U
 
 struct ath_gen_timer_configuration {
 	u32 next_addr;
@@ -433,7 +442,8 @@
 };
 
 struct ath_hw {
-	struct ath_softc *ah_sc;
+	struct ieee80211_hw *hw;
+	struct ath_common common;
 	struct ath9k_hw_version hw_version;
 	struct ath9k_ops_config config;
 	struct ath9k_hw_capabilities caps;
@@ -450,7 +460,6 @@
 
 	bool sw_mgmt_crypto;
 	bool is_pciexpress;
-	u8 macaddr[ETH_ALEN];
 	u16 tx_trig_level;
 	u16 rfsilent;
 	u32 rfkill_gpio;
@@ -523,7 +532,14 @@
 		DONT_USE_32KHZ,
 	} enable_32kHz_clock;
 
-	/* RF */
+	/* Callback for radio frequency change */
+	int (*ath9k_hw_rf_set_freq)(struct ath_hw *ah, struct ath9k_channel *chan);
+
+	/* Callback for baseband spur frequency */
+	void (*ath9k_hw_spur_mitigate_freq)(struct ath_hw *ah,
+					    struct ath9k_channel *chan);
+
+	/* Used to program the radio on non single-chip devices */
 	u32 *analogBank0Data;
 	u32 *analogBank1Data;
 	u32 *analogBank2Data;
@@ -540,7 +556,6 @@
 	u32 acktimeout;
 	u32 ctstimeout;
 	u32 globaltxtimeout;
-	u8 gbeacon_rate;
 
 	/* ANI */
 	u32 proc_phyerr;
@@ -553,8 +568,10 @@
 	int firpwr[5];
 	enum ath9k_ani_cmd ani_function;
 
+	/* Bluetooth coexistance */
+	struct ath_btcoex_hw btcoex_hw;
+
 	u32 intr_txqs;
-	enum ath9k_ht_extprotspacing extprotspacing;
 	u8 txchainmask;
 	u8 rxchainmask;
 
@@ -578,20 +595,32 @@
 	struct ar5416IniArray iniModesAdditional;
 	struct ar5416IniArray iniModesRxGain;
 	struct ar5416IniArray iniModesTxGain;
+	struct ar5416IniArray iniModes_9271_1_0_only;
+	struct ar5416IniArray iniCckfirNormal;
+	struct ar5416IniArray iniCckfirJapan2484;
 
 	u32 intr_gen_timer_trigger;
 	u32 intr_gen_timer_thresh;
 	struct ath_gen_timer_table hw_gen_timers;
 };
 
+static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
+{
+	return &ah->common;
+}
+
+static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
+{
+	return &(ath9k_hw_common(ah)->regulatory);
+}
+
 /* Initialization, Detach, Reset */
 const char *ath9k_hw_probe(u16 vendorid, u16 devid);
 void ath9k_hw_detach(struct ath_hw *ah);
 int ath9k_hw_init(struct ath_hw *ah);
-void ath9k_hw_rf_free(struct ath_hw *ah);
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   bool bChannelChange);
-void ath9k_hw_fill_cap_info(struct ath_hw *ah);
+int ath9k_hw_fill_cap_info(struct ath_hw *ah);
 bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
 			    u32 capability, u32 *result);
 bool ath9k_hw_setcapability(struct ath_hw *ah, enum ath9k_capability_type type,
@@ -613,18 +642,13 @@
 void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val);
 u32 ath9k_hw_getdefantenna(struct ath_hw *ah);
 void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna);
-bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
-			       enum ath9k_ant_setting settings,
-			       struct ath9k_channel *chan,
-			       u8 *tx_chainmask, u8 *rx_chainmask,
-			       u8 *antenna_cfgd);
 
 /* General Operation */
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout);
 u32 ath9k_hw_reverse_bits(u32 val, u32 n);
 bool ath9k_get_channel_edges(struct ath_hw *ah, u16 flags, u16 *low, u16 *high);
 u16 ath9k_hw_computetxtime(struct ath_hw *ah,
-			   const struct ath_rate_table *rates,
+			   u8 phy, int kbps,
 			   u32 frameLen, u16 rateix, bool shortPreamble);
 void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
@@ -637,19 +661,21 @@
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac);
 void ath9k_hw_setopmode(struct ath_hw *ah);
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
-void ath9k_hw_setbssidmask(struct ath_softc *sc);
-void ath9k_hw_write_associd(struct ath_softc *sc);
+void ath9k_hw_setbssidmask(struct ath_hw *ah);
+void ath9k_hw_write_associd(struct ath_hw *ah);
 u64 ath9k_hw_gettsf64(struct ath_hw *ah);
 void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64);
 void ath9k_hw_reset_tsf(struct ath_hw *ah);
 void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
+u64 ath9k_hw_extend_tsf(struct ath_hw *ah, u32 rstamp);
 bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
-void ath9k_hw_set11nmac2040(struct ath_hw *ah, enum ath9k_ht_macmode mode);
+void ath9k_hw_set11nmac2040(struct ath_hw *ah);
 void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
 void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 				    const struct ath9k_beacon_state *bs);
-bool ath9k_hw_setpower(struct ath_hw *ah,
-		       enum ath9k_power_mode mode);
+
+bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
+
 void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off);
 
 /* Interrupt Handling */
@@ -663,16 +689,20 @@
 					  void (*overflow)(void *),
 					  void *arg,
 					  u8 timer_index);
-void ath_gen_timer_start(struct ath_hw *ah, struct ath_gen_timer *timer,
-			 u32 timer_next, u32 timer_period);
-void ath_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
+void ath9k_hw_gen_timer_start(struct ath_hw *ah,
+			      struct ath_gen_timer *timer,
+			      u32 timer_next,
+			      u32 timer_period);
+void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
+
 void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
 void ath_gen_timer_isr(struct ath_hw *hw);
 u32 ath9k_hw_gettsf32(struct ath_hw *ah);
 
+void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len);
+
 #define ATH_PCIE_CAP_LINK_CTRL	0x70
 #define ATH_PCIE_CAP_LINK_L0S	1
 #define ATH_PCIE_CAP_LINK_L1	2
 
-void ath_pcie_aspm_disable(struct ath_softc *sc);
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h
index 8622265..8a3bf3a 100644
--- a/drivers/net/wireless/ath/ath9k/initvals.h
+++ b/drivers/net/wireless/ath/ath9k/initvals.h
@@ -21,6 +21,8 @@
     { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
     { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
     { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810, 0x08f04810 },
+    { 0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a, 0x0000320a },
     { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
     { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
     { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
@@ -31,11 +33,11 @@
     { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
     { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
     { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
-    { 0x00009850, 0x6c48b4e0, 0x6c48b4e0, 0x6c48b0de, 0x6c48b0de, 0x6c48b0de },
+    { 0x00009850, 0x6c48b4e0, 0x6d48b4e0, 0x6d48b0de, 0x6c48b0de, 0x6c48b0de },
     { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
-    { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e },
+    { 0x0000985c, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e, 0x31395d5e },
     { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18 },
-    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
     { 0x00009868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 },
     { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
     { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
@@ -46,10 +48,10 @@
     { 0x0000a960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
     { 0x0000b960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
     { 0x00009964, 0x00000000, 0x00000000, 0x00001120, 0x00001120, 0x00001120 },
-    { 0x0000c9bc, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00 },
+    { 0x000099bc, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00 },
     { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
     { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
-    { 0x000099c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c },
+    { 0x000099c8, 0x6af6532c, 0x6af6532c, 0x6af6532c, 0x6af6532c, 0x6af6532c },
     { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
     { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
     { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
@@ -199,7 +201,6 @@
     { 0x00008110, 0x00000168 },
     { 0x00008118, 0x000100aa },
     { 0x0000811c, 0x00003210 },
-    { 0x00008120, 0x08f04800 },
     { 0x00008124, 0x00000000 },
     { 0x00008128, 0x00000000 },
     { 0x0000812c, 0x00000000 },
@@ -215,7 +216,6 @@
     { 0x00008178, 0x00000100 },
     { 0x0000817c, 0x00000000 },
     { 0x000081c4, 0x00000000 },
-    { 0x000081d0, 0x00003210 },
     { 0x000081ec, 0x00000000 },
     { 0x000081f0, 0x00000000 },
     { 0x000081f4, 0x00000000 },
@@ -246,6 +246,7 @@
     { 0x00008258, 0x00000000 },
     { 0x0000825c, 0x400000ff },
     { 0x00008260, 0x00080922 },
+    { 0x00008264, 0xa8000010 },
     { 0x00008270, 0x00000000 },
     { 0x00008274, 0x40000000 },
     { 0x00008278, 0x003e4180 },
@@ -406,9 +407,9 @@
     { 0x0000a25c, 0x0f0f0f01 },
     { 0x0000a260, 0xdfa91f01 },
     { 0x0000a268, 0x00000000 },
-    { 0x0000a26c, 0x0ebae9c6 },
-    { 0x0000b26c, 0x0ebae9c6 },
-    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000a26c, 0x0e79e5c6 },
+    { 0x0000b26c, 0x0e79e5c6 },
+    { 0x0000c26c, 0x0e79e5c6 },
     { 0x0000d270, 0x00820820 },
     { 0x0000a278, 0x1ce739ce },
     { 0x0000a27c, 0x051701ce },
@@ -2551,26 +2552,27 @@
     { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
     { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
     { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
-    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009824, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e },
     { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
     { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
     { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
     { 0x00009840, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a012e, 0x206a012e },
     { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
-    { 0x00009850, 0x6c4000e2, 0x6c4000e2, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 },
+    { 0x00009850, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 },
     { 0x00009858, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e },
-    { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x3139605e, 0x31395d5e, 0x31395d5e },
+    { 0x0000985c, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e, 0x31395d5e },
     { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
     { 0x00009864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
     { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
     { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
     { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
-    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000268, 0x0000000b, 0x00000016 },
     { 0x00009924, 0xd00a8a0b, 0xd00a8a0b, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
     { 0x00009944, 0xffbc1010, 0xffbc1010, 0xffbc1010, 0xffbc1010, 0xffbc1010 },
     { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
     { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
     { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 },
+    { 0x0000c968, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce, 0x000003ce },
     { 0x000099b8, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c },
     { 0x000099bc, 0x00000a00, 0x00000a00, 0x00000c00, 0x00000c00, 0x00000c00 },
     { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
@@ -2585,8 +2587,10 @@
     { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 },
     { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
     { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a23c, 0x13c88000, 0x13c88000, 0x13c88001, 0x13c88000, 0x13c88000 },
     { 0x0000a250, 0x001ff000, 0x001ff000, 0x0004a000, 0x0004a000, 0x0004a000 },
     { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+    { 0x0000a388, 0x0c000000, 0x0c000000, 0x08000000, 0x0c000000, 0x0c000000 },
     { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
     { 0x00007894, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000 },
 };
@@ -2813,7 +2817,6 @@
     { 0x00009958, 0x2108ecff },
     { 0x00009940, 0x14750604 },
     { 0x0000c95c, 0x004b6a8e },
-    { 0x0000c968, 0x000003ce },
     { 0x00009970, 0x190fb515 },
     { 0x00009974, 0x00000000 },
     { 0x00009978, 0x00000001 },
@@ -2849,7 +2852,6 @@
     { 0x0000a22c, 0x233f7180 },
     { 0x0000a234, 0x20202020 },
     { 0x0000a238, 0x20202020 },
-    { 0x0000a23c, 0x13c88000 },
     { 0x0000a240, 0x38490a20 },
     { 0x0000a244, 0x00007bb6 },
     { 0x0000a248, 0x0fff3ffc },
@@ -2859,8 +2861,8 @@
     { 0x0000a25c, 0x0f0f0f01 },
     { 0x0000a260, 0xdfa91f01 },
     { 0x0000a268, 0x00000000 },
-    { 0x0000a26c, 0x0ebae9c6 },
-    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000a26c, 0x0e79e5c6 },
+    { 0x0000b26c, 0x0e79e5c6 },
     { 0x0000d270, 0x00820820 },
     { 0x0000a278, 0x1ce739ce },
     { 0x0000d35c, 0x07ffffef },
@@ -2874,7 +2876,6 @@
     { 0x0000d37c, 0x7fffffe2 },
     { 0x0000d380, 0x7f3c7bba },
     { 0x0000d384, 0xf3307ff0 },
-    { 0x0000a388, 0x0c000000 },
     { 0x0000a38c, 0x20202020 },
     { 0x0000a390, 0x20202020 },
     { 0x0000a394, 0x1ce739ce },
@@ -2940,7 +2941,7 @@
     { 0x0000801c, 0x148ec02b, 0x148ec057 },
     { 0x00008318, 0x000044c0, 0x00008980 },
     { 0x00009820, 0x02020200, 0x02020200 },
-    { 0x00009824, 0x00000f0f, 0x00000f0f },
+    { 0x00009824, 0x01000f0f, 0x01000f0f },
     { 0x00009828, 0x0b020001, 0x0b020001 },
     { 0x00009834, 0x00000f0f, 0x00000f0f },
     { 0x00009844, 0x03721821, 0x03721821 },
@@ -3348,6 +3349,8 @@
 };
 
 static const u32 ar9280Modes_high_power_tx_gain_9280_2[][6] = {
+    { 0x0000a274, 0x0a19e652, 0x0a19e652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a27c, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce },
     { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
     { 0x0000a304, 0x00003002, 0x00003002, 0x00004002, 0x00004002, 0x00004002 },
     { 0x0000a308, 0x00006004, 0x00006004, 0x00007008, 0x00007008, 0x00007008 },
@@ -3376,11 +3379,11 @@
     { 0x00007840, 0x00172000, 0x00172000, 0x00172000, 0x00172000, 0x00172000 },
     { 0x00007820, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480 },
     { 0x00007844, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480 },
-    { 0x0000a274, 0x0a19e652, 0x0a19e652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
-    { 0x0000a27c, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce },
 };
 
 static const u32 ar9280Modes_original_tx_gain_9280_2[][6] = {
+    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a27c, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce },
     { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
     { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 },
     { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 },
@@ -3409,8 +3412,6 @@
     { 0x00007840, 0x00392000, 0x00392000, 0x00392000, 0x00392000, 0x00392000 },
     { 0x00007820, 0x92592480, 0x92592480, 0x92592480, 0x92592480, 0x92592480 },
     { 0x00007844, 0x92592480, 0x92592480, 0x92592480, 0x92592480, 0x92592480 },
-    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
-    { 0x0000a27c, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce },
 };
 
 static const u32 ar9280PciePhy_clkreq_off_L1_9280[][2] = {
@@ -5918,9 +5919,6 @@
     { 0x000099ec, 0x0cc80caa },
     { 0x000099f0, 0x00000000 },
     { 0x000099fc, 0x00001042 },
-    { 0x0000a1f4, 0x00fffeff },
-    { 0x0000a1f8, 0x00f5f9ff },
-    { 0x0000a1fc, 0xb79f6427 },
     { 0x0000a208, 0x803e4788 },
     { 0x0000a210, 0x4080a333 },
     { 0x0000a214, 0x40206c10 },
@@ -5980,7 +5978,7 @@
     { 0x0000b3f4, 0x00000000 },
     { 0x0000a7d8, 0x000003f1 },
     { 0x00007800, 0x00000800 },
-    { 0x00007804, 0x6c35ffc2 },
+    { 0x00007804, 0x6c35ffd2 },
     { 0x00007808, 0x6db6c000 },
     { 0x0000780c, 0x6db6cb30 },
     { 0x00007810, 0x6db6cb6c },
@@ -6000,7 +5998,7 @@
     { 0x00007848, 0x934934a8 },
     { 0x00007850, 0x00000000 },
     { 0x00007854, 0x00000800 },
-    { 0x00007858, 0x6c35ffc2 },
+    { 0x00007858, 0x6c35ffd2 },
     { 0x0000785c, 0x6db6c000 },
     { 0x00007860, 0x6db6cb30 },
     { 0x00007864, 0x6db6cb6c },
@@ -6027,6 +6025,22 @@
     { 0x000078b8, 0x2a850160 },
 };
 
+/*
+ * For Japanese regulatory requirements, 2484 MHz requires the following three
+ * registers be programmed differently from the channel between 2412 and 2472 MHz.
+ */
+static const u_int32_t ar9287Common_normal_cck_fir_coeff_92871_1[][2] = {
+    { 0x0000a1f4, 0x00fffeff },
+    { 0x0000a1f8, 0x00f5f9ff },
+    { 0x0000a1fc, 0xb79f6427 },
+};
+
+static const u_int32_t ar9287Common_japan_2484_cck_fir_coeff_92871_1[][2] = {
+    { 0x0000a1f4, 0x00000000 },
+    { 0x0000a1f8, 0xefff0301 },
+    { 0x0000a1fc, 0xca9228ee },
+};
+
 static const u_int32_t ar9287Modes_tx_gain_9287_1_1[][6] = {
     /* Address      5G-HT20     5G-HT40     2G-HT40     2G-HT20     Turbo   */
     { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
@@ -6365,8 +6379,8 @@
 };
 
 
-/* AR9271 initialization values automaticaly created: 03/23/09 */
-static const u_int32_t ar9271Modes_9271_1_0[][6] = {
+/* AR9271 initialization values automaticaly created: 06/04/09 */
+static const u_int32_t ar9271Modes_9271[][6] = {
     { 0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160, 0x000001e0 },
     { 0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c, 0x000001e0 },
     { 0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38, 0x00001180 },
@@ -6376,8 +6390,8 @@
     { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
     { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
     { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
-    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
-    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+    { 0x00009824, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e },
+    { 0x00009828, 0x3a020001, 0x3a020001, 0x3a020001, 0x3a020001, 0x3a020001 },
     { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
     { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
     { 0x00009840, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e, 0x206a012e },
@@ -6391,6 +6405,7 @@
     { 0x00009864, 0x0000fe00, 0x0000fe00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
     { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
     { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
+    { 0x00009910, 0x30002310, 0x30002310, 0x30002310, 0x30002310, 0x30002310 },
     { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
     { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
     { 0x00009924, 0xd00a8007, 0xd00a8007, 0xd00a800d, 0xd00a800d, 0xd00a800d },
@@ -6401,7 +6416,7 @@
     { 0x000099bc, 0x00000600, 0x00000600, 0x00000c00, 0x00000c00, 0x00000c00 },
     { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
     { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
-    { 0x000099c8, 0x6af65329, 0x6af65329, 0x6af65329, 0x6af65329, 0x6af65329 },
+    { 0x000099c8, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f, 0x6af6532f },
     { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
     { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
     { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
@@ -6690,7 +6705,7 @@
     { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
 };
 
-static const u_int32_t ar9271Common_9271_1_0[][2] = {
+static const u_int32_t ar9271Common_9271[][2] = {
     { 0x0000000c, 0x00000000 },
     { 0x00000030, 0x00020045 },
     { 0x00000034, 0x00000005 },
@@ -6786,7 +6801,7 @@
     { 0x0000803c, 0x00000000 },
     { 0x00008048, 0x00000000 },
     { 0x00008054, 0x00000000 },
-    { 0x00008058, 0x02000000 },
+    { 0x00008058, 0x00000000 },
     { 0x0000805c, 0x000fc78f },
     { 0x00008060, 0x0000000f },
     { 0x00008064, 0x00000000 },
@@ -6817,7 +6832,7 @@
     { 0x00008110, 0x00000168 },
     { 0x00008118, 0x000100aa },
     { 0x0000811c, 0x00003210 },
-    { 0x00008120, 0x08f04814 },
+    { 0x00008120, 0x08f04810 },
     { 0x00008124, 0x00000000 },
     { 0x00008128, 0x00000000 },
     { 0x0000812c, 0x00000000 },
@@ -6864,7 +6879,7 @@
     { 0x00008258, 0x00000000 },
     { 0x0000825c, 0x400000ff },
     { 0x00008260, 0x00080922 },
-    { 0x00008264, 0xa8a00010 },
+    { 0x00008264, 0x88a00010 },
     { 0x00008270, 0x00000000 },
     { 0x00008274, 0x40000000 },
     { 0x00008278, 0x003e4180 },
@@ -6896,7 +6911,7 @@
     { 0x00007814, 0x924934a8 },
     { 0x0000781c, 0x00000000 },
     { 0x00007820, 0x00000c04 },
-    { 0x00007824, 0x00d86bff },
+    { 0x00007824, 0x00d8abff },
     { 0x00007828, 0x66964300 },
     { 0x0000782c, 0x8db6d961 },
     { 0x00007830, 0x8db6d96c },
@@ -6930,7 +6945,6 @@
     { 0x00009904, 0x00000000 },
     { 0x00009908, 0x00000000 },
     { 0x0000990c, 0x00000000 },
-    { 0x00009910, 0x30002310 },
     { 0x0000991c, 0x10000fff },
     { 0x00009920, 0x04900000 },
     { 0x00009928, 0x00000001 },
@@ -6944,7 +6958,7 @@
     { 0x00009954, 0x5f3ca3de },
     { 0x00009958, 0x0108ecff },
     { 0x00009968, 0x000003ce },
-    { 0x00009970, 0x192bb515 },
+    { 0x00009970, 0x192bb514 },
     { 0x00009974, 0x00000000 },
     { 0x00009978, 0x00000001 },
     { 0x0000997c, 0x00000000 },
@@ -7031,3 +7045,8 @@
     { 0x0000d380, 0x7f3c7bba },
     { 0x0000d384, 0xf3307ff0 },
 };
+
+static const u_int32_t ar9271Modes_9271_1_0_only[][6] = {
+    { 0x00009910, 0x30002311, 0x30002311, 0x30002311, 0x30002311, 0x30002311 },
+    { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
+};
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 800bfab..71b84d9 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -14,16 +14,16 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
 					struct ath9k_tx_queue_info *qi)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-		"tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
-		ah->txok_interrupt_mask, ah->txerr_interrupt_mask,
-		ah->txdesc_interrupt_mask, ah->txeol_interrupt_mask,
-		ah->txurn_interrupt_mask);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_INTERRUPT,
+		  "tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
+		  ah->txok_interrupt_mask, ah->txerr_interrupt_mask,
+		  ah->txdesc_interrupt_mask, ah->txeol_interrupt_mask,
+		  ah->txurn_interrupt_mask);
 
 	REG_WRITE(ah, AR_IMR_S0,
 		  SM(ah->txok_interrupt_mask, AR_IMR_S0_QCU_TXOK)
@@ -39,17 +39,21 @@
 {
 	return REG_READ(ah, AR_QTXDP(q));
 }
+EXPORT_SYMBOL(ath9k_hw_gettxbuf);
 
 void ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp)
 {
 	REG_WRITE(ah, AR_QTXDP(q), txdp);
 }
+EXPORT_SYMBOL(ath9k_hw_puttxbuf);
 
 void ath9k_hw_txstart(struct ath_hw *ah, u32 q)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Enable TXE on queue: %u\n", q);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_QUEUE,
+		  "Enable TXE on queue: %u\n", q);
 	REG_WRITE(ah, AR_Q_TXE, 1 << q);
 }
+EXPORT_SYMBOL(ath9k_hw_txstart);
 
 u32 ath9k_hw_numtxpending(struct ath_hw *ah, u32 q)
 {
@@ -64,13 +68,39 @@
 
 	return npend;
 }
+EXPORT_SYMBOL(ath9k_hw_numtxpending);
 
+/**
+ * ath9k_hw_updatetxtriglevel - adjusts the frame trigger level
+ *
+ * @ah: atheros hardware struct
+ * @bIncTrigLevel: whether or not the frame trigger level should be updated
+ *
+ * The frame trigger level specifies the minimum number of bytes,
+ * in units of 64 bytes, that must be DMA'ed into the PCU TX FIFO
+ * before the PCU will initiate sending the frame on the air. This can
+ * mean we initiate transmit before a full frame is on the PCU TX FIFO.
+ * Resets to 0x1 (meaning 64 bytes or a full frame, whichever occurs
+ * first)
+ *
+ * Caution must be taken to ensure to set the frame trigger level based
+ * on the DMA request size. For example if the DMA request size is set to
+ * 128 bytes the trigger level cannot exceed 6 * 64 = 384. This is because
+ * there need to be enough space in the tx FIFO for the requested transfer
+ * size. Hence the tx FIFO will stop with 512 - 128 = 384 bytes. If we set
+ * the threshold to a value beyond 6, then the transmit will hang.
+ *
+ * Current dual   stream devices have a PCU TX FIFO size of 8 KB.
+ * Current single stream devices have a PCU TX FIFO size of 4 KB, however,
+ * there is a hardware issue which forces us to use 2 KB instead so the
+ * frame trigger level must not exceed 2 KB for these chipsets.
+ */
 bool ath9k_hw_updatetxtriglevel(struct ath_hw *ah, bool bIncTrigLevel)
 {
 	u32 txcfg, curLevel, newLevel;
 	enum ath9k_int omask;
 
-	if (ah->tx_trig_level >= MAX_TX_FIFO_THRESHOLD)
+	if (ah->tx_trig_level >= ah->config.max_txtrig_level)
 		return false;
 
 	omask = ath9k_hw_set_interrupts(ah, ah->mask_reg & ~ATH9K_INT_GLOBAL);
@@ -79,7 +109,7 @@
 	curLevel = MS(txcfg, AR_FTRIG);
 	newLevel = curLevel;
 	if (bIncTrigLevel) {
-		if (curLevel < MAX_TX_FIFO_THRESHOLD)
+		if (curLevel < ah->config.max_txtrig_level)
 			newLevel++;
 	} else if (curLevel > MIN_TX_FIFO_THRESHOLD)
 		newLevel--;
@@ -93,27 +123,28 @@
 
 	return newLevel != curLevel;
 }
+EXPORT_SYMBOL(ath9k_hw_updatetxtriglevel);
 
 bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 {
 #define ATH9K_TX_STOP_DMA_TIMEOUT	4000    /* usec */
 #define ATH9K_TIME_QUANTUM		100     /* usec */
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath9k_tx_queue_info *qi;
 	u32 tsfLow, j, wait;
 	u32 wait_time = ATH9K_TX_STOP_DMA_TIMEOUT / ATH9K_TIME_QUANTUM;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -126,9 +157,9 @@
 	}
 
 	if (ath9k_hw_numtxpending(ah, q)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-			"%s: Num of pending TX Frames %d on Q %d\n",
-			__func__, ath9k_hw_numtxpending(ah, q), q);
+		ath_print(common, ATH_DBG_QUEUE,
+			  "%s: Num of pending TX Frames %d on Q %d\n",
+			  __func__, ath9k_hw_numtxpending(ah, q), q);
 
 		for (j = 0; j < 2; j++) {
 			tsfLow = REG_READ(ah, AR_TSF_L32);
@@ -142,9 +173,9 @@
 			if ((REG_READ(ah, AR_TSF_L32) >> 10) == (tsfLow >> 10))
 				break;
 
-			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"TSF has moved while trying to set "
-				"quiet time TSF: 0x%08x\n", tsfLow);
+			ath_print(common, ATH_DBG_QUEUE,
+				  "TSF has moved while trying to set "
+				  "quiet time TSF: 0x%08x\n", tsfLow);
 		}
 
 		REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
@@ -155,9 +186,9 @@
 		wait = wait_time;
 		while (ath9k_hw_numtxpending(ah, q)) {
 			if ((--wait) == 0) {
-				DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-					"Failed to stop TX DMA in 100 "
-					"msec after killing last frame\n");
+				ath_print(common, ATH_DBG_QUEUE,
+					  "Failed to stop TX DMA in 100 "
+					  "msec after killing last frame\n");
 				break;
 			}
 			udelay(ATH9K_TIME_QUANTUM);
@@ -172,6 +203,7 @@
 #undef ATH9K_TX_STOP_DMA_TIMEOUT
 #undef ATH9K_TIME_QUANTUM
 }
+EXPORT_SYMBOL(ath9k_hw_stoptxdma);
 
 void ath9k_hw_filltxdesc(struct ath_hw *ah, struct ath_desc *ds,
 			 u32 segLen, bool firstSeg,
@@ -198,6 +230,7 @@
 	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
 	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
 }
+EXPORT_SYMBOL(ath9k_hw_filltxdesc);
 
 void ath9k_hw_cleartxdesc(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -209,6 +242,7 @@
 	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
 	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
 }
+EXPORT_SYMBOL(ath9k_hw_cleartxdesc);
 
 int ath9k_hw_txprocdesc(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -222,6 +256,8 @@
 	ds->ds_txstat.ts_status = 0;
 	ds->ds_txstat.ts_flags = 0;
 
+	if (ads->ds_txstatus1 & AR_FrmXmitOK)
+		ds->ds_txstat.ts_status |= ATH9K_TX_ACKED;
 	if (ads->ds_txstatus1 & AR_ExcessiveRetries)
 		ds->ds_txstat.ts_status |= ATH9K_TXERR_XRETRY;
 	if (ads->ds_txstatus1 & AR_Filtered)
@@ -284,6 +320,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(ath9k_hw_txprocdesc);
 
 void ath9k_hw_set11n_txdesc(struct ath_hw *ah, struct ath_desc *ds,
 			    u32 pktLen, enum ath9k_pkt_type type, u32 txPower,
@@ -319,6 +356,7 @@
 		ads->ds_ctl11 = 0;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_txdesc);
 
 void ath9k_hw_set11n_ratescenario(struct ath_hw *ah, struct ath_desc *ds,
 				  struct ath_desc *lastds,
@@ -374,6 +412,7 @@
 	last_ads->ds_ctl2 = ads->ds_ctl2;
 	last_ads->ds_ctl3 = ads->ds_ctl3;
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_ratescenario);
 
 void ath9k_hw_set11n_aggr_first(struct ath_hw *ah, struct ath_desc *ds,
 				u32 aggrLen)
@@ -384,6 +423,7 @@
 	ads->ds_ctl6 &= ~AR_AggrLen;
 	ads->ds_ctl6 |= SM(aggrLen, AR_AggrLen);
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_aggr_first);
 
 void ath9k_hw_set11n_aggr_middle(struct ath_hw *ah, struct ath_desc *ds,
 				 u32 numDelims)
@@ -398,6 +438,7 @@
 	ctl6 |= SM(numDelims, AR_PadDelim);
 	ads->ds_ctl6 = ctl6;
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_aggr_middle);
 
 void ath9k_hw_set11n_aggr_last(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -407,6 +448,7 @@
 	ads->ds_ctl1 &= ~AR_MoreAggr;
 	ads->ds_ctl6 &= ~AR_PadDelim;
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_aggr_last);
 
 void ath9k_hw_clr11n_aggr(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -414,6 +456,7 @@
 
 	ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
 }
+EXPORT_SYMBOL(ath9k_hw_clr11n_aggr);
 
 void ath9k_hw_set11n_burstduration(struct ath_hw *ah, struct ath_desc *ds,
 				   u32 burstDuration)
@@ -423,6 +466,7 @@
 	ads->ds_ctl2 &= ~AR_BurstDur;
 	ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_burstduration);
 
 void ath9k_hw_set11n_virtualmorefrag(struct ath_hw *ah, struct ath_desc *ds,
 				     u32 vmf)
@@ -440,28 +484,30 @@
 	*txqs &= ah->intr_txqs;
 	ah->intr_txqs &= ~(*txqs);
 }
+EXPORT_SYMBOL(ath9k_hw_gettxintrtxqs);
 
 bool ath9k_hw_set_txq_props(struct ath_hw *ah, int q,
 			    const struct ath9k_tx_queue_info *qinfo)
 {
 	u32 cw;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Set TXQ properties, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Set TXQ properties, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
 
 	qi->tqi_ver = qinfo->tqi_ver;
 	qi->tqi_subtype = qinfo->tqi_subtype;
@@ -510,23 +556,25 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_set_txq_props);
 
 bool ath9k_hw_get_txq_props(struct ath_hw *ah, int q,
 			    struct ath9k_tx_queue_info *qinfo)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Get TXQ properties, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Get TXQ properties, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -547,10 +595,12 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_get_txq_props);
 
 int ath9k_hw_setuptxqueue(struct ath_hw *ah, enum ath9k_tx_queue type,
 			  const struct ath9k_tx_queue_info *qinfo)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info *qi;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	int q;
@@ -574,23 +624,23 @@
 			    ATH9K_TX_QUEUE_INACTIVE)
 				break;
 		if (q == pCap->total_queues) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"No available TX queue\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "No available TX queue\n");
 			return -1;
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Invalid TX queue type: %u\n",
-			type);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Invalid TX queue type: %u\n", type);
 		return -1;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"TX queue: %u already active\n", q);
+		ath_print(common, ATH_DBG_FATAL,
+			  "TX queue: %u already active\n", q);
 		return -1;
 	}
 	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
@@ -613,25 +663,27 @@
 
 	return q;
 }
+EXPORT_SYMBOL(ath9k_hw_setuptxqueue);
 
 bool ath9k_hw_releasetxqueue(struct ath_hw *ah, u32 q)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Release TXQ, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Release TXQ, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
 
 	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
 	ah->txok_interrupt_mask &= ~(1 << q);
@@ -643,28 +695,30 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_releasetxqueue);
 
 bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_channel *chan = ah->curchan;
 	struct ath9k_tx_queue_info *qi;
 	u32 cwMin, chanCwMin, value;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Reset TXQ, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Reset TXQ, "
+			  "inactive queue: %u\n", q);
 		return true;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
 
 	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
 		if (chan && IS_CHAN_B(chan))
@@ -799,6 +853,7 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_resettxqueue);
 
 int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
 			u32 pa, struct ath_desc *nds, u64 tsf)
@@ -880,6 +935,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(ath9k_hw_rxprocdesc);
 
 void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
 			  u32 size, u32 flags)
@@ -895,7 +951,15 @@
 	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 		memset(&(ads->u), 0, sizeof(ads->u));
 }
+EXPORT_SYMBOL(ath9k_hw_setuprxdesc);
 
+/*
+ * This can stop or re-enables RX.
+ *
+ * If bool is set this will kill any frame which is currently being
+ * transferred between the MAC and baseband and also prevent any new
+ * frames from getting started.
+ */
 bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
 {
 	u32 reg;
@@ -911,8 +975,9 @@
 				     AR_DIAG_RX_ABORT));
 
 			reg = REG_READ(ah, AR_OBS_BUS_1);
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"RX failed to go idle in 10 ms RXSM=0x%x\n", reg);
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "RX failed to go idle in 10 ms RXSM=0x%x\n",
+				  reg);
 
 			return false;
 		}
@@ -923,16 +988,19 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_setrxabort);
 
 void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp)
 {
 	REG_WRITE(ah, AR_RXDP, rxdp);
 }
+EXPORT_SYMBOL(ath9k_hw_putrxbuf);
 
 void ath9k_hw_rxena(struct ath_hw *ah)
 {
 	REG_WRITE(ah, AR_CR, AR_CR_RXE);
 }
+EXPORT_SYMBOL(ath9k_hw_rxena);
 
 void ath9k_hw_startpcureceive(struct ath_hw *ah)
 {
@@ -942,6 +1010,7 @@
 
 	REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
 }
+EXPORT_SYMBOL(ath9k_hw_startpcureceive);
 
 void ath9k_hw_stoppcurecv(struct ath_hw *ah)
 {
@@ -949,12 +1018,13 @@
 
 	ath9k_hw_disable_mib_counters(ah);
 }
+EXPORT_SYMBOL(ath9k_hw_stoppcurecv);
 
 bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
 {
 #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
 #define AH_RX_TIME_QUANTUM     100     /* usec */
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	int i;
 
 	REG_WRITE(ah, AR_CR, AR_CR_RXD);
@@ -967,12 +1037,12 @@
 	}
 
 	if (i == 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"DMA failed to stop in %d ms "
-			"AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
-			AH_RX_STOP_DMA_TIMEOUT / 1000,
-			REG_READ(ah, AR_CR),
-			REG_READ(ah, AR_DIAG_SW));
+		ath_print(common, ATH_DBG_FATAL,
+			  "DMA failed to stop in %d ms "
+			  "AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+			  AH_RX_STOP_DMA_TIMEOUT / 1000,
+			  REG_READ(ah, AR_CR),
+			  REG_READ(ah, AR_DIAG_SW));
 		return false;
 	} else {
 		return true;
@@ -981,3 +1051,17 @@
 #undef AH_RX_TIME_QUANTUM
 #undef AH_RX_STOP_DMA_TIMEOUT
 }
+EXPORT_SYMBOL(ath9k_hw_stopdmarecv);
+
+int ath9k_hw_beaconq_setup(struct ath_hw *ah)
+{
+	struct ath9k_tx_queue_info qi;
+
+	memset(&qi, 0, sizeof(qi));
+	qi.tqi_aifs = 1;
+	qi.tqi_cwmin = 0;
+	qi.tqi_cwmax = 0;
+	/* NB: don't enable any interrupts */
+	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
+}
+EXPORT_SYMBOL(ath9k_hw_beaconq_setup);
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index f56e77d..0c87771 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -76,6 +76,7 @@
 #define ATH9K_TXERR_FIFO           0x04
 #define ATH9K_TXERR_XTXOP          0x08
 #define ATH9K_TXERR_TIMER_EXPIRED  0x10
+#define ATH9K_TX_ACKED		   0x20
 
 #define ATH9K_TX_BA                0x01
 #define ATH9K_TX_PWRMGMT           0x02
@@ -85,9 +86,15 @@
 #define ATH9K_TX_SW_ABORTED        0x40
 #define ATH9K_TX_SW_FILTERED       0x80
 
+/* 64 bytes */
 #define MIN_TX_FIFO_THRESHOLD   0x1
+
+/*
+ * Single stream device AR9285 and AR9271 require 2 KB
+ * to work around a hardware issue, all other devices
+ * have can use the max 4 KB limit.
+ */
 #define MAX_TX_FIFO_THRESHOLD   ((4096 / 64) - 1)
-#define INIT_TX_FIFO_THRESHOLD  MIN_TX_FIFO_THRESHOLD
 
 struct ath_tx_status {
 	u32 ts_tstamp;
@@ -380,6 +387,11 @@
 #define AR_TxBaStatus       0x40000000
 #define AR_TxStatusRsvd01   0x80000000
 
+/*
+ * AR_FrmXmitOK - Frame transmission success flag. If set, the frame was
+ * transmitted successfully. If clear, no ACK or BA was received to indicate
+ * successful transmission when we were expecting an ACK or BA.
+ */
 #define AR_FrmXmitOK            0x00000001
 #define AR_ExcessiveRetries     0x00000002
 #define AR_FIFOUnderrun         0x00000004
@@ -614,19 +626,8 @@
 	ATH9K_CIPHER_MIC = 127
 };
 
-enum ath9k_ht_macmode {
-	ATH9K_HT_MACMODE_20 = 0,
-	ATH9K_HT_MACMODE_2040 = 1,
-};
-
-enum ath9k_ht_extprotspacing {
-	ATH9K_HT_EXTPROTSPACING_20 = 0,
-	ATH9K_HT_EXTPROTSPACING_25 = 1,
-};
-
 struct ath_hw;
 struct ath9k_channel;
-struct ath_rate_table;
 
 u32 ath9k_hw_gettxbuf(struct ath_hw *ah, u32 q);
 void ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp);
@@ -677,5 +678,6 @@
 void ath9k_hw_startpcureceive(struct ath_hw *ah);
 void ath9k_hw_stoppcurecv(struct ath_hw *ah);
 bool ath9k_hw_stopdmarecv(struct ath_hw *ah);
+int ath9k_hw_beaconq_setup(struct ath_hw *ah);
 
 #endif /* MAC_H */
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52bed89..c487434 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -16,6 +16,7 @@
 
 #include <linux/nl80211.h>
 #include "ath9k.h"
+#include "btcoex.h"
 
 static char *dev_info = "ath9k";
 
@@ -28,6 +29,10 @@
 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 
+static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
+module_param_named(debug, ath9k_debug, uint, 0);
+MODULE_PARM_DESC(debug, "Debugging mask");
+
 /* We use the hw_value as an index into our private channel structure */
 
 #define CHAN2G(_freq, _idx)  { \
@@ -99,37 +104,55 @@
 	CHAN5G(5825, 37), /* Channel 165 */
 };
 
+/* Atheros hardware rate code addition for short premble */
+#define SHPCHECK(__hw_rate, __flags) \
+	((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0)
+
+#define RATE(_bitrate, _hw_rate, _flags) {              \
+	.bitrate        = (_bitrate),                   \
+	.flags          = (_flags),                     \
+	.hw_value       = (_hw_rate),                   \
+	.hw_value_short = (SHPCHECK(_hw_rate, _flags))  \
+}
+
+static struct ieee80211_rate ath9k_legacy_rates[] = {
+	RATE(10, 0x1b, 0),
+	RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE),
+	RATE(60, 0x0b, 0),
+	RATE(90, 0x0f, 0),
+	RATE(120, 0x0a, 0),
+	RATE(180, 0x0e, 0),
+	RATE(240, 0x09, 0),
+	RATE(360, 0x0d, 0),
+	RATE(480, 0x08, 0),
+	RATE(540, 0x0c, 0),
+};
+
 static void ath_cache_conf_rate(struct ath_softc *sc,
 				struct ieee80211_conf *conf)
 {
 	switch (conf->channel->band) {
 	case IEEE80211_BAND_2GHZ:
 		if (conf_is_ht20(conf))
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11NG_HT20];
+			sc->cur_rate_mode = ATH9K_MODE_11NG_HT20;
 		else if (conf_is_ht40_minus(conf))
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS];
+			sc->cur_rate_mode = ATH9K_MODE_11NG_HT40MINUS;
 		else if (conf_is_ht40_plus(conf))
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS];
+			sc->cur_rate_mode = ATH9K_MODE_11NG_HT40PLUS;
 		else
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11G];
+			sc->cur_rate_mode = ATH9K_MODE_11G;
 		break;
 	case IEEE80211_BAND_5GHZ:
 		if (conf_is_ht20(conf))
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11NA_HT20];
+			sc->cur_rate_mode = ATH9K_MODE_11NA_HT20;
 		else if (conf_is_ht40_minus(conf))
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS];
+			sc->cur_rate_mode = ATH9K_MODE_11NA_HT40MINUS;
 		else if (conf_is_ht40_plus(conf))
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS];
+			sc->cur_rate_mode = ATH9K_MODE_11NA_HT40PLUS;
 		else
-			sc->cur_rate_table =
-			  sc->hw_rate_table[ATH9K_MODE_11A];
+			sc->cur_rate_mode = ATH9K_MODE_11A;
 		break;
 	default:
 		BUG_ON(1);
@@ -185,50 +208,6 @@
 	}
 }
 
-static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
-{
-	const struct ath_rate_table *rate_table = NULL;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_rate *rate;
-	int i, maxrates;
-
-	switch (band) {
-	case IEEE80211_BAND_2GHZ:
-		rate_table = sc->hw_rate_table[ATH9K_MODE_11G];
-		break;
-	case IEEE80211_BAND_5GHZ:
-		rate_table = sc->hw_rate_table[ATH9K_MODE_11A];
-		break;
-	default:
-		break;
-	}
-
-	if (rate_table == NULL)
-		return;
-
-	sband = &sc->sbands[band];
-	rate = sc->rates[band];
-
-	if (rate_table->rate_cnt > ATH_RATE_MAX)
-		maxrates = ATH_RATE_MAX;
-	else
-		maxrates = rate_table->rate_cnt;
-
-	for (i = 0; i < maxrates; i++) {
-		rate[i].bitrate = rate_table->info[i].ratekbps / 100;
-		rate[i].hw_value = rate_table->info[i].ratecode;
-		if (rate_table->info[i].short_preamble) {
-			rate[i].hw_value_short = rate_table->info[i].ratecode |
-				rate_table->info[i].short_preamble;
-			rate[i].flags = IEEE80211_RATE_SHORT_PREAMBLE;
-		}
-		sband->n_bitrates++;
-
-		DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n",
-			rate[i].bitrate / 10, rate[i].hw_value);
-	}
-}
-
 static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
 						struct ieee80211_hw *hw)
 {
@@ -242,6 +221,51 @@
 	return channel;
 }
 
+static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
+{
+	unsigned long flags;
+	bool ret;
+
+	spin_lock_irqsave(&sc->sc_pm_lock, flags);
+	ret = ath9k_hw_setpower(sc->sc_ah, mode);
+	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+
+	return ret;
+}
+
+void ath9k_ps_wakeup(struct ath_softc *sc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sc->sc_pm_lock, flags);
+	if (++sc->ps_usecount != 1)
+		goto unlock;
+
+	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+
+ unlock:
+	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+}
+
+void ath9k_ps_restore(struct ath_softc *sc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sc->sc_pm_lock, flags);
+	if (--sc->ps_usecount != 0)
+		goto unlock;
+
+	if (sc->ps_enabled &&
+	    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+			      SC_OP_WAIT_FOR_CAB |
+			      SC_OP_WAIT_FOR_PSPOLL_DATA |
+			      SC_OP_WAIT_FOR_TX_ACK)))
+		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
+
+ unlock:
+	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+}
+
 /*
  * Set/change channels.  If the channel is really being changed, it's done
  * by reseting the chip.  To accomplish this we must first cleanup any pending
@@ -251,6 +275,8 @@
 		    struct ath9k_channel *hchan)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &common->hw->conf;
 	bool fastcc = true, stopped;
 	struct ieee80211_channel *channel = hw->conf.channel;
 	int r;
@@ -280,19 +306,19 @@
 	if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
 		fastcc = false;
 
-	DPRINTF(sc, ATH_DBG_CONFIG,
-		"(%u MHz) -> (%u MHz), chanwidth: %d\n",
-		sc->sc_ah->curchan->channel,
-		channel->center_freq, sc->tx_chan_width);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "(%u MHz) -> (%u MHz), conf_is_ht40: %d\n",
+		  sc->sc_ah->curchan->channel,
+		  channel->center_freq, conf_is_ht40(conf));
 
 	spin_lock_bh(&sc->sc_resetlock);
 
 	r = ath9k_hw_reset(ah, hchan, fastcc);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset channel (%u Mhz) "
-			"reset status %d\n",
-			channel->center_freq, r);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset channel (%u Mhz) "
+			  "reset status %d\n",
+			  channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
 		goto ps_restore;
 	}
@@ -301,8 +327,8 @@
 	sc->sc_flags &= ~SC_OP_FULL_RESET;
 
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to restart recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to restart recv logic\n");
 		r = -EIO;
 		goto ps_restore;
 	}
@@ -327,6 +353,7 @@
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	bool longcal = false;
 	bool shortcal = false;
 	bool aniflag = false;
@@ -351,33 +378,34 @@
 	ath9k_ps_wakeup(sc);
 
 	/* Long calibration runs independently of short calibration. */
-	if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
+	if ((timestamp - common->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
 		longcal = true;
-		DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
-		sc->ani.longcal_timer = timestamp;
+		ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
+		common->ani.longcal_timer = timestamp;
 	}
 
 	/* Short calibration applies only while caldone is false */
-	if (!sc->ani.caldone) {
-		if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) {
+	if (!common->ani.caldone) {
+		if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
 			shortcal = true;
-			DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies);
-			sc->ani.shortcal_timer = timestamp;
-			sc->ani.resetcal_timer = timestamp;
+			ath_print(common, ATH_DBG_ANI,
+				  "shortcal @%lu\n", jiffies);
+			common->ani.shortcal_timer = timestamp;
+			common->ani.resetcal_timer = timestamp;
 		}
 	} else {
-		if ((timestamp - sc->ani.resetcal_timer) >=
+		if ((timestamp - common->ani.resetcal_timer) >=
 		    ATH_RESTART_CALINTERVAL) {
-			sc->ani.caldone = ath9k_hw_reset_calvalid(ah);
-			if (sc->ani.caldone)
-				sc->ani.resetcal_timer = timestamp;
+			common->ani.caldone = ath9k_hw_reset_calvalid(ah);
+			if (common->ani.caldone)
+				common->ani.resetcal_timer = timestamp;
 		}
 	}
 
 	/* Verify whether we must check ANI */
-	if ((timestamp - sc->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
+	if ((timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
 		aniflag = true;
-		sc->ani.checkani_timer = timestamp;
+		common->ani.checkani_timer = timestamp;
 	}
 
 	/* Skip all processing if there's nothing to do. */
@@ -388,16 +416,21 @@
 
 		/* Perform calibration if necessary */
 		if (longcal || shortcal) {
-			sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan,
-						     sc->rx_chainmask, longcal);
+			common->ani.caldone =
+				ath9k_hw_calibrate(ah,
+						   ah->curchan,
+						   common->rx_chainmask,
+						   longcal);
 
 			if (longcal)
-				sc->ani.noise_floor = ath9k_hw_getchan_noise(ah,
+				common->ani.noise_floor = ath9k_hw_getchan_noise(ah,
 								     ah->curchan);
 
-			DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n",
-				ah->curchan->channel, ah->curchan->channelFlags,
-				sc->ani.noise_floor);
+			ath_print(common, ATH_DBG_ANI,
+				  " calibrate chan %u/%x nf: %d\n",
+				  ah->curchan->channel,
+				  ah->curchan->channelFlags,
+				  common->ani.noise_floor);
 		}
 	}
 
@@ -413,21 +446,21 @@
 	cal_interval = ATH_LONG_CALINTERVAL;
 	if (sc->sc_ah->config.enable_ani)
 		cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
-	if (!sc->ani.caldone)
+	if (!common->ani.caldone)
 		cal_interval = min(cal_interval, (u32)short_cal_interval);
 
-	mod_timer(&sc->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
+	mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 }
 
-static void ath_start_ani(struct ath_softc *sc)
+static void ath_start_ani(struct ath_common *common)
 {
 	unsigned long timestamp = jiffies_to_msecs(jiffies);
 
-	sc->ani.longcal_timer = timestamp;
-	sc->ani.shortcal_timer = timestamp;
-	sc->ani.checkani_timer = timestamp;
+	common->ani.longcal_timer = timestamp;
+	common->ani.shortcal_timer = timestamp;
+	common->ani.checkani_timer = timestamp;
 
-	mod_timer(&sc->ani.timer,
+	mod_timer(&common->ani.timer,
 		  jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL));
 }
 
@@ -439,17 +472,22 @@
  */
 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 {
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	if ((sc->sc_flags & SC_OP_SCANNING) || is_ht ||
-	    (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE)) {
-		sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
-		sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
+	    (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
+		common->tx_chainmask = ah->caps.tx_chainmask;
+		common->rx_chainmask = ah->caps.rx_chainmask;
 	} else {
-		sc->tx_chainmask = 1;
-		sc->rx_chainmask = 1;
+		common->tx_chainmask = 1;
+		common->rx_chainmask = 1;
 	}
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n",
-		sc->tx_chainmask, sc->rx_chainmask);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "tx chmask: %d, rx chmask: %d\n",
+		  common->tx_chainmask,
+		  common->rx_chainmask);
 }
 
 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
@@ -478,6 +516,9 @@
 static void ath9k_tasklet(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	u32 status = sc->intrstatus;
 
 	ath9k_ps_wakeup(sc);
@@ -502,16 +543,17 @@
 		 * TSF sync does not look correct; remain awake to sync with
 		 * the next Beacon.
 		 */
-		DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n");
+		ath_print(common, ATH_DBG_PS,
+			  "TSFOOR - Sync with next Beacon\n");
 		sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
 	}
 
-	if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
+	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 		if (status & ATH9K_INT_GENTIMER)
 			ath_gen_timer_isr(sc->sc_ah);
 
 	/* re-enable hardware interrupt */
-	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+	ath9k_hw_set_interrupts(ah, sc->imask);
 	ath9k_ps_restore(sc);
 }
 
@@ -602,7 +644,7 @@
 		if (status & ATH9K_INT_TIM_TIMER) {
 			/* Clear RxAbort bit so that we can
 			 * receive frames */
-			ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
+			ath9k_setpower(sc, ATH9K_PM_AWAKE);
 			ath9k_hw_setrxabort(sc->sc_ah, 0);
 			sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
 		}
@@ -664,10 +706,11 @@
 	return chanmode;
 }
 
-static int ath_setkey_tkip(struct ath_softc *sc, u16 keyix, const u8 *key,
+static int ath_setkey_tkip(struct ath_common *common, u16 keyix, const u8 *key,
 			   struct ath9k_keyval *hk, const u8 *addr,
 			   bool authenticator)
 {
+	struct ath_hw *ah = common->ah;
 	const u8 *key_rxmic;
 	const u8 *key_txmic;
 
@@ -687,42 +730,42 @@
 			memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 			memcpy(hk->kv_txmic, key_rxmic, sizeof(hk->kv_mic));
 		}
-		return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
+		return ath9k_hw_set_keycache_entry(ah, keyix, hk, addr);
 	}
-	if (!sc->splitmic) {
+	if (!common->splitmic) {
 		/* TX and RX keys share the same key cache entry. */
 		memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 		memcpy(hk->kv_txmic, key_txmic, sizeof(hk->kv_txmic));
-		return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, addr);
+		return ath9k_hw_set_keycache_entry(ah, keyix, hk, addr);
 	}
 
 	/* Separate key cache entries for TX and RX */
 
 	/* TX key goes at first index, RX key at +32. */
 	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
-	if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
+	if (!ath9k_hw_set_keycache_entry(ah, keyix, hk, NULL)) {
 		/* TX MIC entry failed. No need to proceed further */
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Setting TX MIC Key Failed\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Setting TX MIC Key Failed\n");
 		return 0;
 	}
 
 	memcpy(hk->kv_mic, key_rxmic, sizeof(hk->kv_mic));
 	/* XXX delete tx key on failure? */
-	return ath9k_hw_set_keycache_entry(sc->sc_ah, keyix + 32, hk, addr);
+	return ath9k_hw_set_keycache_entry(ah, keyix + 32, hk, addr);
 }
 
-static int ath_reserve_key_cache_slot_tkip(struct ath_softc *sc)
+static int ath_reserve_key_cache_slot_tkip(struct ath_common *common)
 {
 	int i;
 
-	for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
-		if (test_bit(i, sc->keymap) ||
-		    test_bit(i + 64, sc->keymap))
+	for (i = IEEE80211_WEP_NKID; i < common->keymax / 2; i++) {
+		if (test_bit(i, common->keymap) ||
+		    test_bit(i + 64, common->keymap))
 			continue; /* At least one part of TKIP key allocated */
-		if (sc->splitmic &&
-		    (test_bit(i + 32, sc->keymap) ||
-		     test_bit(i + 64 + 32, sc->keymap)))
+		if (common->splitmic &&
+		    (test_bit(i + 32, common->keymap) ||
+		     test_bit(i + 64 + 32, common->keymap)))
 			continue; /* At least one part of TKIP key allocated */
 
 		/* Found a free slot for a TKIP key */
@@ -731,60 +774,60 @@
 	return -1;
 }
 
-static int ath_reserve_key_cache_slot(struct ath_softc *sc)
+static int ath_reserve_key_cache_slot(struct ath_common *common)
 {
 	int i;
 
 	/* First, try to find slots that would not be available for TKIP. */
-	if (sc->splitmic) {
-		for (i = IEEE80211_WEP_NKID; i < sc->keymax / 4; i++) {
-			if (!test_bit(i, sc->keymap) &&
-			    (test_bit(i + 32, sc->keymap) ||
-			     test_bit(i + 64, sc->keymap) ||
-			     test_bit(i + 64 + 32, sc->keymap)))
+	if (common->splitmic) {
+		for (i = IEEE80211_WEP_NKID; i < common->keymax / 4; i++) {
+			if (!test_bit(i, common->keymap) &&
+			    (test_bit(i + 32, common->keymap) ||
+			     test_bit(i + 64, common->keymap) ||
+			     test_bit(i + 64 + 32, common->keymap)))
 				return i;
-			if (!test_bit(i + 32, sc->keymap) &&
-			    (test_bit(i, sc->keymap) ||
-			     test_bit(i + 64, sc->keymap) ||
-			     test_bit(i + 64 + 32, sc->keymap)))
+			if (!test_bit(i + 32, common->keymap) &&
+			    (test_bit(i, common->keymap) ||
+			     test_bit(i + 64, common->keymap) ||
+			     test_bit(i + 64 + 32, common->keymap)))
 				return i + 32;
-			if (!test_bit(i + 64, sc->keymap) &&
-			    (test_bit(i , sc->keymap) ||
-			     test_bit(i + 32, sc->keymap) ||
-			     test_bit(i + 64 + 32, sc->keymap)))
+			if (!test_bit(i + 64, common->keymap) &&
+			    (test_bit(i , common->keymap) ||
+			     test_bit(i + 32, common->keymap) ||
+			     test_bit(i + 64 + 32, common->keymap)))
 				return i + 64;
-			if (!test_bit(i + 64 + 32, sc->keymap) &&
-			    (test_bit(i, sc->keymap) ||
-			     test_bit(i + 32, sc->keymap) ||
-			     test_bit(i + 64, sc->keymap)))
+			if (!test_bit(i + 64 + 32, common->keymap) &&
+			    (test_bit(i, common->keymap) ||
+			     test_bit(i + 32, common->keymap) ||
+			     test_bit(i + 64, common->keymap)))
 				return i + 64 + 32;
 		}
 	} else {
-		for (i = IEEE80211_WEP_NKID; i < sc->keymax / 2; i++) {
-			if (!test_bit(i, sc->keymap) &&
-			    test_bit(i + 64, sc->keymap))
+		for (i = IEEE80211_WEP_NKID; i < common->keymax / 2; i++) {
+			if (!test_bit(i, common->keymap) &&
+			    test_bit(i + 64, common->keymap))
 				return i;
-			if (test_bit(i, sc->keymap) &&
-			    !test_bit(i + 64, sc->keymap))
+			if (test_bit(i, common->keymap) &&
+			    !test_bit(i + 64, common->keymap))
 				return i + 64;
 		}
 	}
 
 	/* No partially used TKIP slots, pick any available slot */
-	for (i = IEEE80211_WEP_NKID; i < sc->keymax; i++) {
+	for (i = IEEE80211_WEP_NKID; i < common->keymax; i++) {
 		/* Do not allow slots that could be needed for TKIP group keys
 		 * to be used. This limitation could be removed if we know that
 		 * TKIP will not be used. */
 		if (i >= 64 && i < 64 + IEEE80211_WEP_NKID)
 			continue;
-		if (sc->splitmic) {
+		if (common->splitmic) {
 			if (i >= 32 && i < 32 + IEEE80211_WEP_NKID)
 				continue;
 			if (i >= 64 + 32 && i < 64 + 32 + IEEE80211_WEP_NKID)
 				continue;
 		}
 
-		if (!test_bit(i, sc->keymap))
+		if (!test_bit(i, common->keymap))
 			return i; /* Found a free slot for a key */
 	}
 
@@ -792,11 +835,12 @@
 	return -1;
 }
 
-static int ath_key_config(struct ath_softc *sc,
+static int ath_key_config(struct ath_common *common,
 			  struct ieee80211_vif *vif,
 			  struct ieee80211_sta *sta,
 			  struct ieee80211_key_conf *key)
 {
+	struct ath_hw *ah = common->ah;
 	struct ath9k_keyval hk;
 	const u8 *mac = NULL;
 	int ret = 0;
@@ -842,54 +886,57 @@
 		mac = sta->addr;
 
 		if (key->alg == ALG_TKIP)
-			idx = ath_reserve_key_cache_slot_tkip(sc);
+			idx = ath_reserve_key_cache_slot_tkip(common);
 		else
-			idx = ath_reserve_key_cache_slot(sc);
+			idx = ath_reserve_key_cache_slot(common);
 		if (idx < 0)
 			return -ENOSPC; /* no free key cache entries */
 	}
 
 	if (key->alg == ALG_TKIP)
-		ret = ath_setkey_tkip(sc, idx, key->key, &hk, mac,
+		ret = ath_setkey_tkip(common, idx, key->key, &hk, mac,
 				      vif->type == NL80211_IFTYPE_AP);
 	else
-		ret = ath9k_hw_set_keycache_entry(sc->sc_ah, idx, &hk, mac);
+		ret = ath9k_hw_set_keycache_entry(ah, idx, &hk, mac);
 
 	if (!ret)
 		return -EIO;
 
-	set_bit(idx, sc->keymap);
+	set_bit(idx, common->keymap);
 	if (key->alg == ALG_TKIP) {
-		set_bit(idx + 64, sc->keymap);
-		if (sc->splitmic) {
-			set_bit(idx + 32, sc->keymap);
-			set_bit(idx + 64 + 32, sc->keymap);
+		set_bit(idx + 64, common->keymap);
+		if (common->splitmic) {
+			set_bit(idx + 32, common->keymap);
+			set_bit(idx + 64 + 32, common->keymap);
 		}
 	}
 
 	return idx;
 }
 
-static void ath_key_delete(struct ath_softc *sc, struct ieee80211_key_conf *key)
+static void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key)
 {
-	ath9k_hw_keyreset(sc->sc_ah, key->hw_key_idx);
+	struct ath_hw *ah = common->ah;
+
+	ath9k_hw_keyreset(ah, key->hw_key_idx);
 	if (key->hw_key_idx < IEEE80211_WEP_NKID)
 		return;
 
-	clear_bit(key->hw_key_idx, sc->keymap);
+	clear_bit(key->hw_key_idx, common->keymap);
 	if (key->alg != ALG_TKIP)
 		return;
 
-	clear_bit(key->hw_key_idx + 64, sc->keymap);
-	if (sc->splitmic) {
-		clear_bit(key->hw_key_idx + 32, sc->keymap);
-		clear_bit(key->hw_key_idx + 64 + 32, sc->keymap);
+	clear_bit(key->hw_key_idx + 64, common->keymap);
+	if (common->splitmic) {
+		clear_bit(key->hw_key_idx + 32, common->keymap);
+		clear_bit(key->hw_key_idx + 64 + 32, common->keymap);
 	}
 }
 
 static void setup_ht_cap(struct ath_softc *sc,
 			 struct ieee80211_sta_ht_cap *ht_info)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u8 tx_streams, rx_streams;
 
 	ht_info->ht_supported = true;
@@ -903,12 +950,15 @@
 
 	/* set up supported mcs set */
 	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-	tx_streams = !(sc->tx_chainmask & (sc->tx_chainmask - 1)) ? 1 : 2;
-	rx_streams = !(sc->rx_chainmask & (sc->rx_chainmask - 1)) ? 1 : 2;
+	tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
+		     1 : 2;
+	rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
+		     1 : 2;
 
 	if (tx_streams != rx_streams) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "TX streams %d, RX streams: %d\n",
-			tx_streams, rx_streams);
+		ath_print(common, ATH_DBG_CONFIG,
+			  "TX streams %d, RX streams: %d\n",
+			  tx_streams, rx_streams);
 		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
 		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
 				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
@@ -925,14 +975,17 @@
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
 {
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (bss_conf->assoc) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
-			bss_conf->aid, sc->curbssid);
+		ath_print(common, ATH_DBG_CONFIG,
+			  "Bss Info ASSOC %d, bssid: %pM\n",
+			   bss_conf->aid, common->curbssid);
 
 		/* New association, store aid */
-		sc->curaid = bss_conf->aid;
-		ath9k_hw_write_associd(sc);
+		common->curaid = bss_conf->aid;
+		ath9k_hw_write_associd(ah);
 
 		/*
 		 * Request a re-configuration of Beacon related timers
@@ -947,12 +1000,12 @@
 		/* Reset rssi stats */
 		sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 
-		ath_start_ani(sc);
+		ath_start_ani(common);
 	} else {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
-		sc->curaid = 0;
+		ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
+		common->curaid = 0;
 		/* Stop ANI */
-		del_timer_sync(&sc->ani.timer);
+		del_timer_sync(&common->ani.timer);
 	}
 }
 
@@ -1042,8 +1095,8 @@
 
 	ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
 	if (ret)
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Failed to register led:%s", led->name);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Failed to register led:%s", led->name);
 	else
 		led->registered = 1;
 	return ret;
@@ -1124,10 +1177,11 @@
 	ath_deinit_leds(sc);
 }
 
-void ath_radio_enable(struct ath_softc *sc)
+void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	struct ieee80211_channel *channel = sc->hw->conf.channel;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_channel *channel = hw->conf.channel;
 	int r;
 
 	ath9k_ps_wakeup(sc);
@@ -1139,17 +1193,17 @@
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset channel %u (%uMhz) ",
-			"reset status %d\n",
-			channel->center_freq, r);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset channel %u (%uMhz) ",
+			  "reset status %d\n",
+			  channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath_update_txpow(sc);
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to restart recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to restart recv logic\n");
 		return;
 	}
 
@@ -1164,18 +1218,18 @@
 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
 
-	ieee80211_wake_queues(sc->hw);
+	ieee80211_wake_queues(hw);
 	ath9k_ps_restore(sc);
 }
 
-void ath_radio_disable(struct ath_softc *sc)
+void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	struct ieee80211_channel *channel = sc->hw->conf.channel;
+	struct ieee80211_channel *channel = hw->conf.channel;
 	int r;
 
 	ath9k_ps_wakeup(sc);
-	ieee80211_stop_queues(sc->hw);
+	ieee80211_stop_queues(hw);
 
 	/* Disable LED */
 	ath9k_hw_set_gpio(ah, ah->led_pin, 1);
@@ -1189,22 +1243,22 @@
 	ath_flushrecv(sc);		/* flush recv queue */
 
 	if (!ah->curchan)
-		ah->curchan = ath_get_curchannel(sc, sc->hw);
+		ah->curchan = ath_get_curchannel(sc, hw);
 
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset channel %u (%uMhz) "
-			"reset status %d\n",
-			channel->center_freq, r);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unable to reset channel %u (%uMhz) "
+			  "reset status %d\n",
+			  channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1, 1);
 	ath9k_ps_restore(sc);
-	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
+	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 }
 
 /*******************/
@@ -1236,23 +1290,26 @@
 		wiphy_rfkill_start_polling(sc->hw->wiphy);
 }
 
-void ath_cleanup(struct ath_softc *sc)
+static void ath9k_uninit_hw(struct ath_softc *sc)
 {
-	ath_detach(sc);
-	free_irq(sc->irq, sc);
-	ath_bus_cleanup(sc);
-	kfree(sc->sec_wiphy);
-	ieee80211_free_hw(sc->hw);
+	struct ath_hw *ah = sc->sc_ah;
+
+	BUG_ON(!ah);
+
+	ath9k_exit_debug(ah);
+	ath9k_hw_detach(ah);
+	sc->sc_ah = NULL;
 }
 
-void ath_detach(struct ath_softc *sc)
+static void ath_clean_core(struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
+	struct ath_hw *ah = sc->sc_ah;
 	int i = 0;
 
 	ath9k_ps_wakeup(sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
+	dev_dbg(sc->dev, "Detach ATH hw\n");
 
 	ath_deinit_leds(sc);
 	wiphy_rfkill_stop_polling(sc->hw->wiphy);
@@ -1273,20 +1330,36 @@
 	tasklet_kill(&sc->bcon_tasklet);
 
 	if (!(sc->sc_flags & SC_OP_INVALID))
-		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+		ath9k_setpower(sc, ATH9K_PM_AWAKE);
 
 	/* cleanup tx queues */
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 
-	if ((sc->btcoex_info.no_stomp_timer) &&
-	    sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
-		ath_gen_timer_free(sc->sc_ah, sc->btcoex_info.no_stomp_timer);
+	if ((sc->btcoex.no_stomp_timer) &&
+	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
+}
 
-	ath9k_hw_detach(sc->sc_ah);
-	sc->sc_ah = NULL;
-	ath9k_exit_debug(sc);
+void ath_detach(struct ath_softc *sc)
+{
+	ath_clean_core(sc);
+	ath9k_uninit_hw(sc);
+}
+
+void ath_cleanup(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_clean_core(sc);
+	free_irq(sc->irq, sc);
+	ath_bus_cleanup(common);
+	kfree(sc->sec_wiphy);
+	ieee80211_free_hw(sc->hw);
+
+	ath9k_uninit_hw(sc);
 }
 
 static int ath9k_reg_notifier(struct wiphy *wiphy,
@@ -1295,29 +1368,245 @@
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ath_regulatory *reg = &sc->common.regulatory;
+	struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
 
 	return ath_reg_notifier_apply(wiphy, request, reg);
 }
 
 /*
+ * Detects if there is any priority bt traffic
+ */
+static void ath_detect_bt_priority(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	if (ath9k_hw_gpio_get(sc->sc_ah, ah->btcoex_hw.btpriority_gpio))
+		btcoex->bt_priority_cnt++;
+
+	if (time_after(jiffies, btcoex->bt_priority_time +
+			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
+		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
+				  "BT priority traffic detected");
+			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
+		} else {
+			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+		}
+
+		btcoex->bt_priority_cnt = 0;
+		btcoex->bt_priority_time = jiffies;
+	}
+}
+
+/*
+ * Configures appropriate weight based on stomp type.
+ */
+static void ath9k_btcoex_bt_stomp(struct ath_softc *sc,
+				  enum ath_stomp_type stomp_type)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	switch (stomp_type) {
+	case ATH_BTCOEX_STOMP_ALL:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_ALL_WLAN_WGHT);
+		break;
+	case ATH_BTCOEX_STOMP_LOW:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_LOW_WLAN_WGHT);
+		break;
+	case ATH_BTCOEX_STOMP_NONE:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_NONE_WLAN_WGHT);
+		break;
+	default:
+		ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+			  "Invalid Stomptype\n");
+		break;
+	}
+
+	ath9k_hw_btcoex_enable(ah);
+}
+
+static void ath9k_gen_timer_start(struct ath_hw *ah,
+				  struct ath_gen_timer *timer,
+				  u32 timer_next,
+				  u32 timer_period)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	ath9k_hw_gen_timer_start(ah, timer, timer_next, timer_period);
+
+	if ((sc->imask & ATH9K_INT_GENTIMER) == 0) {
+		ath9k_hw_set_interrupts(ah, 0);
+		sc->imask |= ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+}
+
+static void ath9k_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+
+	ath9k_hw_gen_timer_stop(ah, timer);
+
+	/* if no timer is enabled, turn off interrupt mask */
+	if (timer_table->timer_mask.val == 0) {
+		ath9k_hw_set_interrupts(ah, 0);
+		sc->imask &= ~ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+}
+
+/*
+ * This is the master bt coex timer which runs for every
+ * 45ms, bt traffic will be given priority during 55% of this
+ * period while wlan gets remaining 45%
+ */
+static void ath_btcoex_period_timer(unsigned long data)
+{
+	struct ath_softc *sc = (struct ath_softc *) data;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	ath_detect_bt_priority(sc);
+
+	spin_lock_bh(&btcoex->btcoex_lock);
+
+	ath9k_btcoex_bt_stomp(sc, btcoex->bt_stomp_type);
+
+	spin_unlock_bh(&btcoex->btcoex_lock);
+
+	if (btcoex->btcoex_period != btcoex->btcoex_no_stomp) {
+		if (btcoex->hw_timer_enabled)
+			ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
+
+		ath9k_gen_timer_start(ah,
+				      btcoex->no_stomp_timer,
+				      (ath9k_hw_gettsf32(ah) +
+				       btcoex->btcoex_no_stomp),
+				       btcoex->btcoex_no_stomp * 10);
+		btcoex->hw_timer_enabled = true;
+	}
+
+	mod_timer(&btcoex->period_timer, jiffies +
+				  msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
+}
+
+/*
+ * Generic tsf based hw timer which configures weight
+ * registers to time slice between wlan and bt traffic
+ */
+static void ath_btcoex_no_stomp_timer(void *arg)
+{
+	struct ath_softc *sc = (struct ath_softc *)arg;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		  "no stomp timer running \n");
+
+	spin_lock_bh(&btcoex->btcoex_lock);
+
+	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
+		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_NONE);
+	 else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_LOW);
+
+	spin_unlock_bh(&btcoex->btcoex_lock);
+}
+
+static int ath_init_btcoex_timer(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
+	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
+		btcoex->btcoex_period / 100;
+
+	setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
+			(unsigned long) sc);
+
+	spin_lock_init(&btcoex->btcoex_lock);
+
+	btcoex->no_stomp_timer = ath_gen_timer_alloc(sc->sc_ah,
+			ath_btcoex_no_stomp_timer,
+			ath_btcoex_no_stomp_timer,
+			(void *) sc, AR_FIRST_NDP_TIMER);
+
+	if (!btcoex->no_stomp_timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		iowrite32(val, sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, sc->mem + reg_offset);
+}
+
+static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	u32 val;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		val = ioread32(sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(sc->mem + reg_offset);
+	return val;
+}
+
+static const struct ath_ops ath9k_common_ops = {
+	.read = ath9k_ioread32,
+	.write = ath9k_iowrite32,
+};
+
+/*
  * Initialize and fill ath_softc, ath_sofct is the
  * "Software Carrier" struct. Historically it has existed
  * to allow the separation between hardware specific
  * variables (now in ath_hw) and driver specific variables.
  */
-static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid)
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
+			  const struct ath_bus_ops *bus_ops)
 {
 	struct ath_hw *ah = NULL;
+	struct ath_common *common;
 	int r = 0, i;
 	int csz = 0;
+	int qnum;
 
 	/* XXX: hardware will not be ready until ath_open() being called */
 	sc->sc_flags |= SC_OP_INVALID;
 
-	if (ath9k_init_debug(sc) < 0)
-		printk(KERN_ERR "Unable to create debugfs files\n");
-
 	spin_lock_init(&sc->wiphy_lock);
 	spin_lock_init(&sc->sc_resetlock);
 	spin_lock_init(&sc->sc_serial_rw);
@@ -1328,75 +1617,80 @@
 	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
 		     (unsigned long)sc);
 
-	/*
-	 * Cache line size is used to size and align various
-	 * structures used to communicate with the hardware.
-	 */
-	ath_read_cachesize(sc, &csz);
-	/* XXX assert csz is non-zero */
-	sc->common.cachelsz = csz << 2;	/* convert to bytes */
-
 	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
-	if (!ah) {
-		r = -ENOMEM;
-		goto bad_no_ah;
-	}
+	if (!ah)
+		return -ENOMEM;
 
-	ah->ah_sc = sc;
 	ah->hw_version.devid = devid;
 	ah->hw_version.subsysid = subsysid;
 	sc->sc_ah = ah;
 
+	common = ath9k_hw_common(ah);
+	common->ops = &ath9k_common_ops;
+	common->bus_ops = bus_ops;
+	common->ah = ah;
+	common->hw = sc->hw;
+	common->priv = sc;
+	common->debug_mask = ath9k_debug;
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	ath_read_cachesize(common, &csz);
+	/* XXX assert csz is non-zero */
+	common->cachelsz = csz << 2;	/* convert to bytes */
+
 	r = ath9k_hw_init(ah);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to initialize hardware; "
-			"initialization status: %d\n", r);
-		goto bad;
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to initialize hardware; "
+			  "initialization status: %d\n", r);
+		goto bad_free_hw;
+	}
+
+	if (ath9k_init_debug(ah) < 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to create debugfs files\n");
+		goto bad_free_hw;
 	}
 
 	/* Get the hardware key cache size. */
-	sc->keymax = ah->caps.keycache_size;
-	if (sc->keymax > ATH_KEYMAX) {
-		DPRINTF(sc, ATH_DBG_ANY,
-			"Warning, using only %u entries in %u key cache\n",
-			ATH_KEYMAX, sc->keymax);
-		sc->keymax = ATH_KEYMAX;
+	common->keymax = ah->caps.keycache_size;
+	if (common->keymax > ATH_KEYMAX) {
+		ath_print(common, ATH_DBG_ANY,
+			  "Warning, using only %u entries in %u key cache\n",
+			  ATH_KEYMAX, common->keymax);
+		common->keymax = ATH_KEYMAX;
 	}
 
 	/*
 	 * Reset the key cache since some parts do not
 	 * reset the contents on initial power up.
 	 */
-	for (i = 0; i < sc->keymax; i++)
+	for (i = 0; i < common->keymax; i++)
 		ath9k_hw_keyreset(ah, (u16) i);
 
 	/* default to MONITOR mode */
 	sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
 
-	/* Setup rate tables */
-
-	ath_rate_attach(sc);
-	ath_setup_rates(sc, IEEE80211_BAND_2GHZ);
-	ath_setup_rates(sc, IEEE80211_BAND_5GHZ);
-
 	/*
 	 * Allocate hardware transmit queues: one queue for
 	 * beacon frames and one data queue for each QoS
 	 * priority.  Note that the hal handles reseting
 	 * these queues at the needed time.
 	 */
-	sc->beacon.beaconq = ath_beaconq_setup(ah);
+	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
 	if (sc->beacon.beaconq == -1) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup a beacon xmit queue\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup a beacon xmit queue\n");
 		r = -EIO;
 		goto bad2;
 	}
 	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
 	if (sc->beacon.cabq == NULL) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup CAB xmit queue\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup CAB xmit queue\n");
 		r = -EIO;
 		goto bad2;
 	}
@@ -1410,27 +1704,27 @@
 	/* Setup data queues */
 	/* NB: ensure BK queue is the lowest priority h/w queue */
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for BK traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BK traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
 
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for BE traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BE traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for VI traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VI traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for VO traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VO traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
@@ -1438,8 +1732,8 @@
 	/* Initializes the noise floor to a reasonable default value.
 	 * Later on this will be updated during ANI processing. */
 
-	sc->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
-	setup_timer(&sc->ani.timer, ath_ani_calibrate, (unsigned long)sc);
+	common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR;
+	setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc);
 
 	if (ath9k_hw_getcapability(ah, ATH9K_CAP_CIPHER,
 				   ATH9K_CIPHER_TKIP, NULL)) {
@@ -1465,7 +1759,7 @@
 				      ATH9K_CIPHER_MIC, NULL)
 	    && ath9k_hw_getcapability(ah, ATH9K_CAP_TKIP_SPLIT,
 				      0, NULL))
-		sc->splitmic = 1;
+		common->splitmic = 1;
 
 	/* turn on mcast key search if possible */
 	if (!ath9k_hw_getcapability(ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL))
@@ -1480,14 +1774,14 @@
 		sc->sc_flags |= SC_OP_RXAGGR;
 	}
 
-	sc->tx_chainmask = ah->caps.tx_chainmask;
-	sc->rx_chainmask = ah->caps.rx_chainmask;
+	common->tx_chainmask = ah->caps.tx_chainmask;
+	common->rx_chainmask = ah->caps.rx_chainmask;
 
 	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
 	sc->rx.defant = ath9k_hw_getdefantenna(ah);
 
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
-		memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
+		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
 
 	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
 
@@ -1499,26 +1793,45 @@
 
 	/* setup channels and rates */
 
-	sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
-	sc->sbands[IEEE80211_BAND_2GHZ].bitrates =
-		sc->rates[IEEE80211_BAND_2GHZ];
-	sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
-	sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
-		ARRAY_SIZE(ath9k_2ghz_chantable);
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
+		sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
+		sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
+			ARRAY_SIZE(ath9k_2ghz_chantable);
+		sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
+		sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates);
+	}
 
 	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
 		sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
-		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
-			sc->rates[IEEE80211_BAND_5GHZ];
 		sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ;
 		sc->sbands[IEEE80211_BAND_5GHZ].n_channels =
 			ARRAY_SIZE(ath9k_5ghz_chantable);
+		sc->sbands[IEEE80211_BAND_5GHZ].bitrates =
+			ath9k_legacy_rates + 4;
+		sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates =
+			ARRAY_SIZE(ath9k_legacy_rates) - 4;
 	}
 
-	if (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE) {
-		r = ath9k_hw_btcoex_init(ah);
+	switch (ah->btcoex_hw.scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_init_2wire(ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_init_3wire(ah);
+		r = ath_init_btcoex_timer(sc);
 		if (r)
 			goto bad2;
+		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+		ath9k_hw_init_btcoex_hw(ah, qnum);
+		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+		break;
+	default:
+		WARN_ON(1);
+		break;
 	}
 
 	return 0;
@@ -1527,12 +1840,9 @@
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-bad:
-	ath9k_hw_detach(ah);
-	sc->sc_ah = NULL;
-bad_no_ah:
-	ath9k_exit_debug(sc);
 
+bad_free_hw:
+	ath9k_uninit_hw(sc);
 	return r;
 }
 
@@ -1555,6 +1865,8 @@
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
 	hw->queues = 4;
 	hw->max_rates = 4;
 	hw->channel_change_time = 5000;
@@ -1566,43 +1878,53 @@
 
 	hw->rate_control_algorithm = "ath9k_rate_control";
 
-	hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-		&sc->sbands[IEEE80211_BAND_2GHZ];
+	if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
+		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&sc->sbands[IEEE80211_BAND_2GHZ];
 	if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 			&sc->sbands[IEEE80211_BAND_5GHZ];
 }
 
 /* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid)
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+		    const struct ath_bus_ops *bus_ops)
 {
 	struct ieee80211_hw *hw = sc->hw;
+	struct ath_common *common;
+	struct ath_hw *ah;
 	int error = 0, i;
 	struct ath_regulatory *reg;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
+	dev_dbg(sc->dev, "Attach ATH hw\n");
 
-	error = ath_init_softc(devid, sc, subsysid);
+	error = ath_init_softc(devid, sc, subsysid, bus_ops);
 	if (error != 0)
 		return error;
 
+	ah = sc->sc_ah;
+	common = ath9k_hw_common(ah);
+
 	/* get mac address from hardware and set in mac80211 */
 
-	SET_IEEE80211_PERM_ADDR(hw, sc->sc_ah->macaddr);
+	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
 
 	ath_set_hw_capab(sc, hw);
 
-	error = ath_regd_init(&sc->common.regulatory, sc->hw->wiphy,
+	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
 			      ath9k_reg_notifier);
 	if (error)
 		return error;
 
-	reg = &sc->common.regulatory;
+	reg = &common->regulatory;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
-		setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-		if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
-			setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+		if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
+			setup_ht_cap(sc,
+				     &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
+		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
+			setup_ht_cap(sc,
+				     &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
 	}
 
 	/* initialize tx/rx engine */
@@ -1639,9 +1961,7 @@
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 
-	ath9k_hw_detach(sc->sc_ah);
-	sc->sc_ah = NULL;
-	ath9k_exit_debug(sc);
+	ath9k_uninit_hw(sc);
 
 	return error;
 }
@@ -1649,6 +1969,7 @@
 int ath_reset(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_hw *hw = sc->hw;
 	int r;
 
@@ -1660,12 +1981,13 @@
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
 	if (r)
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %d\n", r);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset hardware; reset status %d\n", r);
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0)
-		DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to start recv logic\n");
 
 	/*
 	 * We may be doing a reset in response to a request
@@ -1708,19 +2030,20 @@
 	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
-
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_desc *ds;
 	struct ath_buf *bf;
 	int i, bsize, error;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
-		name, nbuf, ndesc);
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
+		  name, nbuf, ndesc);
 
 	INIT_LIST_HEAD(head);
 	/* ath_desc must be a multiple of DWORDs */
 	if ((sizeof(struct ath_desc) % 4) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n");
-		ASSERT((sizeof(struct ath_desc) % 4) == 0);
+		ath_print(common, ATH_DBG_FATAL,
+			  "ath_desc not DWORD aligned\n");
+		BUG_ON((sizeof(struct ath_desc) % 4) != 0);
 		error = -ENOMEM;
 		goto fail;
 	}
@@ -1753,9 +2076,9 @@
 		goto fail;
 	}
 	ds = dd->dd_desc;
-	DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		name, ds, (u32) dd->dd_desc_len,
-		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
+		  name, ds, (u32) dd->dd_desc_len,
+		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
 
 	/* allocate buffers */
 	bsize = sizeof(struct ath_buf) * nbuf;
@@ -1778,7 +2101,7 @@
 			 * descriptor fetch.
 			 */
 			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
-				ASSERT((caddr_t) bf->bf_desc <
+				BUG_ON((caddr_t) bf->bf_desc >=
 				       ((caddr_t) dd->dd_desc +
 					dd->dd_desc_len));
 
@@ -1882,31 +2205,50 @@
 		ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
 	}
 
-	sc->tx_chan_width = ATH9K_HT_MACMODE_20;
-
-	if (conf_is_ht(conf)) {
-		if (conf_is_ht40(conf))
-			sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
-
+	if (conf_is_ht(conf))
 		ichan->chanmode = ath_get_extchanmode(sc, chan,
 					    conf->channel_type);
-	}
 }
 
 /**********************/
 /* mac80211 callbacks */
 /**********************/
 
+/*
+ * (Re)start btcoex timers
+ */
+static void ath9k_btcoex_timer_resume(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		  "Starting btcoex timers");
+
+	/* make sure duty cycle timer is also stopped when resuming */
+	if (btcoex->hw_timer_enabled)
+		ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+
+	btcoex->bt_priority_cnt = 0;
+	btcoex->bt_priority_time = jiffies;
+	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+
+	mod_timer(&btcoex->period_timer, jiffies);
+}
+
 static int ath9k_start(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_channel *curchan = hw->conf.channel;
 	struct ath9k_channel *init_channel;
 	int r;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
-		"initial channel: %d MHz\n", curchan->center_freq);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Starting driver with initial channel: %d MHz\n",
+		  curchan->center_freq);
 
 	mutex_lock(&sc->mutex);
 
@@ -1938,7 +2280,7 @@
 	init_channel = ath_get_curchannel(sc, hw);
 
 	/* Reset SERDES registers */
-	ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0);
+	ath9k_hw_configpcipowersave(ah, 0, 0);
 
 	/*
 	 * The basic interface to setting the hardware in a good
@@ -1948,12 +2290,12 @@
 	 * and then setup of the interrupt mask.
 	 */
 	spin_lock_bh(&sc->sc_resetlock);
-	r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
+	r = ath9k_hw_reset(ah, init_channel, false);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %d "
-			"(freq %u MHz)\n", r,
-			curchan->center_freq);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset hardware; reset status %d "
+			  "(freq %u MHz)\n", r,
+			  curchan->center_freq);
 		spin_unlock_bh(&sc->sc_resetlock);
 		goto mutex_unlock;
 	}
@@ -1973,7 +2315,8 @@
 	 * here except setup the interrupt mask.
 	 */
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to start recv logic\n");
 		r = -EIO;
 		goto mutex_unlock;
 	}
@@ -1983,10 +2326,10 @@
 		| ATH9K_INT_RXEOL | ATH9K_INT_RXORN
 		| ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
 		sc->imask |= ATH9K_INT_GTT;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
 		sc->imask |= ATH9K_INT_CST;
 
 	ath_cache_conf_rate(sc, &hw->conf);
@@ -1995,21 +2338,22 @@
 
 	/* Disable BMISS interrupt when we're not associated */
 	sc->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
-	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+	ath9k_hw_set_interrupts(ah, sc->imask);
 
 	ieee80211_wake_queues(hw);
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 
-	if ((sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE) &&
-	    !(sc->sc_flags & SC_OP_BTCOEX_ENABLED)) {
-		ath_btcoex_set_weight(&sc->btcoex_info, AR_BT_COEX_WGHT,
-				      AR_STOMP_LOW_WLAN_WGHT);
-		ath9k_hw_btcoex_enable(sc->sc_ah);
+	if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
+	    !ah->btcoex_hw.enabled) {
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_LOW_WLAN_WGHT);
+		ath9k_hw_btcoex_enable(ah);
 
-		ath_pcie_aspm_disable(sc);
-		if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
-			ath_btcoex_timer_resume(sc, &sc->btcoex_info);
+		if (common->bus_ops->bt_coex_prep)
+			common->bus_ops->bt_coex_prep(common);
+		if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+			ath9k_btcoex_timer_resume(sc);
 	}
 
 mutex_unlock:
@@ -2024,17 +2368,19 @@
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_tx_control txctl;
-	int hdrlen, padsize;
+	int padpos, padsize;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 
 	if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
-		printk(KERN_DEBUG "ath9k: %s: TX in unexpected wiphy state "
-		       "%d\n", wiphy_name(hw->wiphy), aphy->state);
+		ath_print(common, ATH_DBG_XMIT,
+			  "ath9k: %s: TX in unexpected wiphy state "
+			  "%d\n", wiphy_name(hw->wiphy), aphy->state);
 		goto exit;
 	}
 
 	if (sc->ps_enabled) {
-		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 		/*
 		 * mac80211 does not set PM field for normal data frames, so we
 		 * need to update that based on the current PS mode.
@@ -2042,8 +2388,8 @@
 		if (ieee80211_is_data(hdr->frame_control) &&
 		    !ieee80211_is_nullfunc(hdr->frame_control) &&
 		    !ieee80211_has_pm(hdr->frame_control)) {
-			DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame "
-				"while in PS mode\n");
+			ath_print(common, ATH_DBG_PS, "Add PM=1 for a TX frame "
+				  "while in PS mode\n");
 			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
 		}
 	}
@@ -2054,15 +2400,15 @@
 		 * power save mode. Need to wake up hardware for the TX to be
 		 * completed and if needed, also for RX of buffered frames.
 		 */
-		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 		ath9k_ps_wakeup(sc);
 		ath9k_hw_setrxabort(sc->sc_ah, 0);
 		if (ieee80211_is_pspoll(hdr->frame_control)) {
-			DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a "
-				"buffered frame\n");
+			ath_print(common, ATH_DBG_PS,
+				  "Sending PS-Poll to pick a buffered frame\n");
 			sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
 		} else {
-			DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n");
+			ath_print(common, ATH_DBG_PS,
+				  "Wake up to complete TX\n");
 			sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
 		}
 		/*
@@ -2081,7 +2427,6 @@
 	 * BSSes.
 	 */
 	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
 			sc->tx.seq_no += 0x10;
 		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
@@ -2089,13 +2434,13 @@
 	}
 
 	/* Add the padding after the header if this is not already done */
-	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	if (hdrlen & 3) {
-		padsize = hdrlen % 4;
+	padpos = ath9k_cmn_padpos(hdr->frame_control);
+	padsize = padpos & 3;
+	if (padsize && skb->len>padpos) {
 		if (skb_headroom(skb) < padsize)
 			return -1;
 		skb_push(skb, padsize);
-		memmove(skb->data, skb->data + padsize, hdrlen);
+		memmove(skb->data, skb->data + padsize, padpos);
 	}
 
 	/* Check if a tx queue is available */
@@ -2104,10 +2449,10 @@
 	if (!txctl.txq)
 		goto exit;
 
-	DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
+	ath_print(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n");
+		ath_print(common, ATH_DBG_XMIT, "TX failed\n");
 		goto exit;
 	}
 
@@ -2117,10 +2462,28 @@
 	return 0;
 }
 
+/*
+ * Pause btcoex timer and bt duty cycle timer
+ */
+static void ath9k_btcoex_timer_pause(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	del_timer_sync(&btcoex->period_timer);
+
+	if (btcoex->hw_timer_enabled)
+		ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
+
+	btcoex->hw_timer_enabled = false;
+}
+
 static void ath9k_stop(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	mutex_lock(&sc->mutex);
 
@@ -2135,7 +2498,7 @@
 	}
 
 	if (sc->sc_flags & SC_OP_INVALID) {
-		DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
+		ath_print(common, ATH_DBG_ANY, "Device not present\n");
 		mutex_unlock(&sc->mutex);
 		return;
 	}
@@ -2145,33 +2508,33 @@
 		return; /* another wiphy still in use */
 	}
 
-	if (sc->sc_flags & SC_OP_BTCOEX_ENABLED) {
-		ath9k_hw_btcoex_disable(sc->sc_ah);
-		if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
-			ath_btcoex_timer_pause(sc, &sc->btcoex_info);
+	if (ah->btcoex_hw.enabled) {
+		ath9k_hw_btcoex_disable(ah);
+		if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+			ath9k_btcoex_timer_pause(sc);
 	}
 
 	/* make sure h/w will not generate any interrupt
 	 * before setting the invalid flag. */
-	ath9k_hw_set_interrupts(sc->sc_ah, 0);
+	ath9k_hw_set_interrupts(ah, 0);
 
 	if (!(sc->sc_flags & SC_OP_INVALID)) {
 		ath_drain_all_txq(sc, false);
 		ath_stoprecv(sc);
-		ath9k_hw_phy_disable(sc->sc_ah);
+		ath9k_hw_phy_disable(ah);
 	} else
 		sc->rx.rxlink = NULL;
 
 	/* disable HAL and put h/w to sleep */
-	ath9k_hw_disable(sc->sc_ah);
-	ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1);
-	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+	ath9k_hw_disable(ah);
+	ath9k_hw_configpcipowersave(ah, 1, 1);
+	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 
 	sc->sc_flags |= SC_OP_INVALID;
 
 	mutex_unlock(&sc->mutex);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n");
+	ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
 }
 
 static int ath9k_add_interface(struct ieee80211_hw *hw,
@@ -2179,6 +2542,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp = (void *)conf->vif->drv_priv;
 	enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
 	int ret = 0;
@@ -2205,13 +2569,14 @@
 		ic_opmode = conf->type;
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_FATAL,
+		ath_print(common, ATH_DBG_FATAL,
 			"Interface type %d not yet supported\n", conf->type);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VIF of type: %d\n", ic_opmode);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Attach a VIF of type: %d\n", ic_opmode);
 
 	/* Set the VIF opmode */
 	avp->av_opmode = ic_opmode;
@@ -2249,7 +2614,7 @@
 	if (conf->type == NL80211_IFTYPE_AP    ||
 	    conf->type == NL80211_IFTYPE_ADHOC ||
 	    conf->type == NL80211_IFTYPE_MONITOR)
-		ath_start_ani(sc);
+		ath_start_ani(common);
 
 out:
 	mutex_unlock(&sc->mutex);
@@ -2261,15 +2626,16 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp = (void *)conf->vif->drv_priv;
 	int i;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
+	ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
 
 	mutex_lock(&sc->mutex);
 
 	/* Stop ANI */
-	del_timer_sync(&sc->ani.timer);
+	del_timer_sync(&common->ani.timer);
 
 	/* Reclaim beacon resources */
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
@@ -2299,32 +2665,55 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ieee80211_conf *conf = &hw->conf;
 	struct ath_hw *ah = sc->sc_ah;
-	bool all_wiphys_idle = false, disable_radio = false;
+	bool disable_radio;
 
 	mutex_lock(&sc->mutex);
 
-	/* Leave this as the first check */
+	/*
+	 * Leave this as the first check because we need to turn on the
+	 * radio if it was disabled before prior to processing the rest
+	 * of the changes. Likewise we must only disable the radio towards
+	 * the end.
+	 */
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+		bool enable_radio;
+		bool all_wiphys_idle;
+		bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
 
 		spin_lock_bh(&sc->wiphy_lock);
 		all_wiphys_idle =  ath9k_all_wiphys_idle(sc);
+		ath9k_set_wiphy_idle(aphy, idle);
+
+		if (!idle && all_wiphys_idle)
+			enable_radio = true;
+
+		/*
+		 * After we unlock here its possible another wiphy
+		 * can be re-renabled so to account for that we will
+		 * only disable the radio toward the end of this routine
+		 * if by then all wiphys are still idle.
+		 */
 		spin_unlock_bh(&sc->wiphy_lock);
 
-		if (conf->flags & IEEE80211_CONF_IDLE){
-			if (all_wiphys_idle)
-				disable_radio = true;
-		}
-		else if (all_wiphys_idle) {
-			ath_radio_enable(sc);
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"not-idle: enabling radio\n");
+		if (enable_radio) {
+			ath_radio_enable(sc, hw);
+			ath_print(common, ATH_DBG_CONFIG,
+				  "not-idle: enabling radio\n");
 		}
 	}
 
+	/*
+	 * We just prepare to enable PS. We have to wait until our AP has
+	 * ACK'd our null data frame to disable RX otherwise we'll ignore
+	 * those ACKs and end up retransmitting the same null data frames.
+	 * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
+	 */
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
+			sc->sc_flags |= SC_OP_PS_ENABLED;
 			if (!(ah->caps.hw_caps &
 			      ATH9K_HW_CAP_AUTOSLEEP)) {
 				if ((sc->imask & ATH9K_INT_TIM_TIMER) == 0) {
@@ -2332,12 +2721,21 @@
 					ath9k_hw_set_interrupts(sc->sc_ah,
 							sc->imask);
 				}
-				ath9k_hw_setrxabort(sc->sc_ah, 1);
 			}
-			sc->ps_enabled = true;
+			/*
+			 * At this point we know hardware has received an ACK
+			 * of a previously sent null data frame.
+			 */
+			if ((sc->sc_flags & SC_OP_NULLFUNC_COMPLETED)) {
+				sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
+				sc->ps_enabled = true;
+				ath9k_hw_setrxabort(sc->sc_ah, 1);
+                        }
 		} else {
 			sc->ps_enabled = false;
-			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+			sc->sc_flags &= ~(SC_OP_PS_ENABLED |
+					  SC_OP_NULLFUNC_COMPLETED);
+			ath9k_setpower(sc, ATH9K_PM_AWAKE);
 			if (!(ah->caps.hw_caps &
 			      ATH9K_HW_CAP_AUTOSLEEP)) {
 				ath9k_hw_setrxabort(sc->sc_ah, 0);
@@ -2372,8 +2770,8 @@
 			goto skip_chan_change;
 		}
 
-		DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
-			curchan->center_freq);
+		ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
+			  curchan->center_freq);
 
 		/* XXX: remove me eventualy */
 		ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
@@ -2381,7 +2779,8 @@
 		ath_update_chainmask(sc, conf_is_ht(conf));
 
 		if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
-			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Unable to set channel\n");
 			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
@@ -2391,9 +2790,13 @@
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
 		sc->config.txpowlimit = 2 * conf->power_level;
 
+	spin_lock_bh(&sc->wiphy_lock);
+	disable_radio = ath9k_all_wiphys_idle(sc);
+	spin_unlock_bh(&sc->wiphy_lock);
+
 	if (disable_radio) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "idle: disabling radio\n");
-		ath_radio_disable(sc);
+		ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
+		ath_radio_disable(sc, hw);
 	}
 
 	mutex_unlock(&sc->mutex);
@@ -2429,7 +2832,8 @@
 	ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
 	ath9k_ps_restore(sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", rfilt);
+	ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+		  "Set HW RX filter: 0x%x\n", rfilt);
 }
 
 static void ath9k_sta_notify(struct ieee80211_hw *hw,
@@ -2457,6 +2861,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_tx_queue_info qi;
 	int ret = 0, qnum;
 
@@ -2473,15 +2878,19 @@
 	qi.tqi_burstTime = params->txop;
 	qnum = ath_get_hal_qnum(queue, sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG,
-		"Configure tx [queue/halq] [%d/%d],  "
-		"aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
-		queue, qnum, params->aifs, params->cw_min,
-		params->cw_max, params->txop);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Configure tx [queue/halq] [%d/%d],  "
+		  "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		  queue, qnum, params->aifs, params->cw_min,
+		  params->cw_max, params->txop);
 
 	ret = ath_txq_update(sc, qnum, &qi);
 	if (ret)
-		DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n");
+		ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
+
+	if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
+		if ((qnum == sc->tx.hwq_map[ATH9K_WME_AC_BE]) && !ret)
+			ath_beaconq_config(sc);
 
 	mutex_unlock(&sc->mutex);
 
@@ -2496,6 +2905,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int ret = 0;
 
 	if (modparam_nohwcrypt)
@@ -2503,11 +2913,11 @@
 
 	mutex_lock(&sc->mutex);
 	ath9k_ps_wakeup(sc);
-	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n");
+	ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
 
 	switch (cmd) {
 	case SET_KEY:
-		ret = ath_key_config(sc, vif, sta, key);
+		ret = ath_key_config(common, vif, sta, key);
 		if (ret >= 0) {
 			key->hw_key_idx = ret;
 			/* push IV and Michael MIC generation to stack */
@@ -2520,7 +2930,7 @@
 		}
 		break;
 	case DISABLE_KEY:
-		ath_key_delete(sc, key);
+		ath_key_delete(common, key);
 		break;
 	default:
 		ret = -EINVAL;
@@ -2540,94 +2950,67 @@
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_vif *avp = (void *)vif->drv_priv;
-	u32 rfilt = 0;
-	int error, i;
+	int error;
 
 	mutex_lock(&sc->mutex);
 
-	/*
-	 * TODO: Need to decide which hw opmode to use for
-	 *       multi-interface cases
-	 * XXX: This belongs into add_interface!
-	 */
-	if (vif->type == NL80211_IFTYPE_AP &&
-	    ah->opmode != NL80211_IFTYPE_AP) {
-		ah->opmode = NL80211_IFTYPE_STATION;
-		ath9k_hw_setopmode(ah);
-		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
-		sc->curaid = 0;
-		ath9k_hw_write_associd(sc);
-		/* Request full reset to get hw opmode changed properly */
-		sc->sc_flags |= SC_OP_FULL_RESET;
+	if (changed & BSS_CHANGED_BSSID) {
+		/* Set BSSID */
+		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+		memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
+		common->curaid = 0;
+		ath9k_hw_write_associd(ah);
+
+		/* Set aggregation protection mode parameters */
+		sc->config.ath_aggr_prot = 0;
+
+		/* Only legacy IBSS for now */
+		if (vif->type == NL80211_IFTYPE_ADHOC)
+			ath_update_chainmask(sc, 0);
+
+		ath_print(common, ATH_DBG_CONFIG,
+			  "BSSID: %pM aid: 0x%x\n",
+			  common->curbssid, common->curaid);
+
+		/* need to reconfigure the beacon */
+		sc->sc_flags &= ~SC_OP_BEACONS ;
 	}
 
-	if ((changed & BSS_CHANGED_BSSID) &&
-	    !is_zero_ether_addr(bss_conf->bssid)) {
-		switch (vif->type) {
-		case NL80211_IFTYPE_STATION:
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_MESH_POINT:
-			/* Set BSSID */
-			memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
-			memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
-			sc->curaid = 0;
-			ath9k_hw_write_associd(sc);
-
-			/* Set aggregation protection mode parameters */
-			sc->config.ath_aggr_prot = 0;
-
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"RX filter 0x%x bssid %pM aid 0x%x\n",
-				rfilt, sc->curbssid, sc->curaid);
-
-			/* need to reconfigure the beacon */
-			sc->sc_flags &= ~SC_OP_BEACONS ;
-
-			break;
-		default:
-			break;
-		}
+	/* Enable transmission of beacons (AP, IBSS, MESH) */
+	if ((changed & BSS_CHANGED_BEACON) ||
+	    ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
+		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+		error = ath_beacon_alloc(aphy, vif);
+		if (!error)
+			ath_beacon_config(sc, vif);
 	}
 
-	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
-	    (vif->type == NL80211_IFTYPE_AP) ||
-	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
-		if ((changed & BSS_CHANGED_BEACON) ||
-		    (changed & BSS_CHANGED_BEACON_ENABLED &&
-		     bss_conf->enable_beacon)) {
-			/*
-			 * Allocate and setup the beacon frame.
-			 *
-			 * Stop any previous beacon DMA.  This may be
-			 * necessary, for example, when an ibss merge
-			 * causes reconfiguration; we may be called
-			 * with beacon transmission active.
-			 */
+	/* Disable transmission of beacons */
+	if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
+		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+
+	if (changed & BSS_CHANGED_BEACON_INT) {
+		sc->beacon_interval = bss_conf->beacon_int;
+		/*
+		 * In case of AP mode, the HW TSF has to be reset
+		 * when the beacon interval changes.
+		 */
+		if (vif->type == NL80211_IFTYPE_AP) {
+			sc->sc_flags |= SC_OP_TSF_RESET;
 			ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-
 			error = ath_beacon_alloc(aphy, vif);
 			if (!error)
 				ath_beacon_config(sc, vif);
+		} else {
+			ath_beacon_config(sc, vif);
 		}
 	}
 
-	/* Check for WLAN_CAPABILITY_PRIVACY ? */
-	if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
-		for (i = 0; i < IEEE80211_WEP_NKID; i++)
-			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
-				ath9k_hw_keysetmac(sc->sc_ah,
-						   (u16)i,
-						   sc->curbssid);
-	}
-
-	/* Only legacy IBSS for now */
-	if (vif->type == NL80211_IFTYPE_ADHOC)
-		ath_update_chainmask(sc, 0);
-
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
-			bss_conf->use_short_preamble);
+		ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
+			  bss_conf->use_short_preamble);
 		if (bss_conf->use_short_preamble)
 			sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
 		else
@@ -2635,8 +3018,8 @@
 	}
 
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
-			bss_conf->use_cts_prot);
+		ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
+			  bss_conf->use_cts_prot);
 		if (bss_conf->use_cts_prot &&
 		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
 			sc->sc_flags |= SC_OP_PROTECT_ENABLE;
@@ -2645,23 +3028,11 @@
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
+		ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
 			bss_conf->assoc);
 		ath9k_bss_assoc_info(sc, vif, bss_conf);
 	}
 
-	/*
-	 * The HW TSF has to be reset when the beacon interval changes.
-	 * We set the flag here, and ath_beacon_config_ap() would take this
-	 * into account when it gets called through the subsequent
-	 * config_interface() call - with IFCC_BEACON in the changed field.
-	 */
-
-	if (changed & BSS_CHANGED_BEACON_INT) {
-		sc->sc_flags |= SC_OP_TSF_RESET;
-		sc->beacon_interval = bss_conf->beacon_int;
-	}
-
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2694,11 +3065,16 @@
 	struct ath_softc *sc = aphy->sc;
 
 	mutex_lock(&sc->mutex);
+
+	ath9k_ps_wakeup(sc);
 	ath9k_hw_reset_tsf(sc->sc_ah);
+	ath9k_ps_restore(sc);
+
 	mutex_unlock(&sc->mutex);
 }
 
 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
 			      enum ieee80211_ampdu_mlme_action action,
 			      struct ieee80211_sta *sta,
 			      u16 tid, u16 *ssn)
@@ -2716,17 +3092,18 @@
 		break;
 	case IEEE80211_AMPDU_TX_START:
 		ath_tx_aggr_start(sc, sta, tid, ssn);
-		ieee80211_start_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		break;
 	case IEEE80211_AMPDU_TX_STOP:
 		ath_tx_aggr_stop(sc, sta, tid);
-		ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid);
+		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 		break;
 	case IEEE80211_AMPDU_TX_OPERATIONAL:
 		ath_tx_aggr_resume(sc, sta, tid);
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unknown AMPDU action\n");
 	}
 
 	return ret;
@@ -2794,64 +3171,6 @@
 	.rfkill_poll        = ath9k_rfkill_poll_state,
 };
 
-static struct {
-	u32 version;
-	const char * name;
-} ath_mac_bb_names[] = {
-	{ AR_SREV_VERSION_5416_PCI,	"5416" },
-	{ AR_SREV_VERSION_5416_PCIE,	"5418" },
-	{ AR_SREV_VERSION_9100,		"9100" },
-	{ AR_SREV_VERSION_9160,		"9160" },
-	{ AR_SREV_VERSION_9280,		"9280" },
-	{ AR_SREV_VERSION_9285,		"9285" },
-	{ AR_SREV_VERSION_9287,         "9287" }
-};
-
-static struct {
-	u16 version;
-	const char * name;
-} ath_rf_names[] = {
-	{ 0,				"5133" },
-	{ AR_RAD5133_SREV_MAJOR,	"5133" },
-	{ AR_RAD5122_SREV_MAJOR,	"5122" },
-	{ AR_RAD2133_SREV_MAJOR,	"2133" },
-	{ AR_RAD2122_SREV_MAJOR,	"2122" }
-};
-
-/*
- * Return the MAC/BB name. "????" is returned if the MAC/BB is unknown.
- */
-const char *
-ath_mac_bb_name(u32 mac_bb_version)
-{
-	int i;
-
-	for (i=0; i<ARRAY_SIZE(ath_mac_bb_names); i++) {
-		if (ath_mac_bb_names[i].version == mac_bb_version) {
-			return ath_mac_bb_names[i].name;
-		}
-	}
-
-	return "????";
-}
-
-/*
- * Return the RF name. "????" is returned if the RF is unknown.
- */
-const char *
-ath_rf_name(u16 rf_version)
-{
-	int i;
-
-	for (i=0; i<ARRAY_SIZE(ath_rf_names); i++) {
-		if (ath_rf_names[i].version == rf_version) {
-			return ath_rf_names[i].name;
-		}
-	}
-
-	return "????";
-}
-
 static int __init ath9k_init(void)
 {
 	int error;
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 903dd8a..5321f73 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -31,8 +31,9 @@
 };
 
 /* return bus cachesize in 4B word units */
-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
 {
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
 	u8 u8tmp;
 
 	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
@@ -48,8 +49,9 @@
 		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
 }
 
-static void ath_pci_cleanup(struct ath_softc *sc)
+static void ath_pci_cleanup(struct ath_common *common)
 {
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
 	struct pci_dev *pdev = to_pci_dev(sc->dev);
 
 	pci_iounmap(pdev, sc->mem);
@@ -57,9 +59,11 @@
 	pci_release_region(pdev, 0);
 }
 
-static bool ath_pci_eeprom_read(struct ath_hw *ah, u32 off, u16 *data)
+static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	(void)REG_READ(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
+	struct ath_hw *ah = (struct ath_hw *) common->ah;
+
+	common->ops->read(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
 
 	if (!ath9k_hw_wait(ah,
 			   AR_EEPROM_STATUS_DATA,
@@ -69,16 +73,34 @@
 		return false;
 	}
 
-	*data = MS(REG_READ(ah, AR_EEPROM_STATUS_DATA),
+	*data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
 		   AR_EEPROM_STATUS_DATA_VAL);
 
 	return true;
 }
 
-static struct ath_bus_ops ath_pci_bus_ops = {
+/*
+ * Bluetooth coexistance requires disabling ASPM.
+ */
+static void ath_pci_bt_coex_prep(struct ath_common *common)
+{
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct pci_dev *pdev = to_pci_dev(sc->dev);
+	u8 aspm;
+
+	if (!pdev->is_pcie)
+		return;
+
+	pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
+	aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
+	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
+}
+
+const static struct ath_bus_ops ath_pci_bus_ops = {
 	.read_cachesize = ath_pci_read_cachesize,
 	.cleanup = ath_pci_cleanup,
 	.eeprom_read = ath_pci_eeprom_read,
+	.bt_coex_prep = ath_pci_bt_coex_prep,
 };
 
 static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -92,6 +114,7 @@
 	u32 val;
 	int ret = 0;
 	struct ath_hw *ah;
+	char hw_name[64];
 
 	if (pci_enable_device(pdev))
 		return -EIO;
@@ -177,10 +200,9 @@
 	sc->hw = hw;
 	sc->dev = &pdev->dev;
 	sc->mem = mem;
-	sc->bus_ops = &ath_pci_bus_ops;
 
 	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
-	ret = ath_init_device(id->device, sc, subsysid);
+	ret = ath_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto bad3;
@@ -197,14 +219,11 @@
 	sc->irq = pdev->irq;
 
 	ah = sc->sc_ah;
+	ath9k_hw_name(ah, hw_name, sizeof(hw_name));
 	printk(KERN_INFO
-	       "%s: Atheros AR%s MAC/BB Rev:%x "
-	       "AR%s RF Rev:%x: mem=0x%lx, irq=%d\n",
+	       "%s: %s mem=0x%lx, irq=%d\n",
 	       wiphy_name(hw->wiphy),
-	       ath_mac_bb_name(ah->hw_version.macVersion),
-	       ah->hw_version.macRev,
-	       ath_rf_name((ah->hw_version.analog5GhzRev & AR_RADIO_SREV_MAJOR)),
-	       ah->hw_version.phyRev,
+	       hw_name,
 	       (unsigned long)mem, pdev->irq);
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c
index 63bf9a3..c3b5939 100644
--- a/drivers/net/wireless/ath/ath9k/phy.c
+++ b/drivers/net/wireless/ath/ath9k/phy.c
@@ -14,18 +14,531 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+/**
+ * DOC: Programming Atheros 802.11n analog front end radios
+ *
+ * AR5416 MAC based PCI devices and AR518 MAC based PCI-Express
+ * devices have either an external AR2133 analog front end radio for single
+ * band 2.4 GHz communication or an AR5133 analog front end radio for dual
+ * band 2.4 GHz / 5 GHz communication.
+ *
+ * All devices after the AR5416 and AR5418 family starting with the AR9280
+ * have their analog front radios, MAC/BB and host PCIe/USB interface embedded
+ * into a single-chip and require less programming.
+ *
+ * The following single-chips exist with a respective embedded radio:
+ *
+ * AR9280 - 11n dual-band 2x2 MIMO for PCIe
+ * AR9281 - 11n single-band 1x2 MIMO for PCIe
+ * AR9285 - 11n single-band 1x1 for PCIe
+ * AR9287 - 11n single-band 2x2 MIMO for PCIe
+ *
+ * AR9220 - 11n dual-band 2x2 MIMO for PCI
+ * AR9223 - 11n single-band 2x2 MIMO for PCI
+ *
+ * AR9287 - 11n single-band 1x1 MIMO for USB
+ */
 
-void
-ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, u32 freqIndex,
-		    int regWrites)
+#include "hw.h"
+
+/**
+ * ath9k_hw_write_regs - ??
+ *
+ * @ah: atheros hardware structure
+ * @freqIndex:
+ * @regWrites:
+ *
+ * Used for both the chipsets with an external AR2133/AR5133 radios and
+ * single-chip devices.
+ */
+void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites)
 {
 	REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites);
 }
 
-bool
-ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
+/**
+ * ath9k_hw_ar9280_set_channel - set channel on single-chip device
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * This is the function to change channel on single-chip devices, that is
+ * all devices after ar9280.
+ *
+ * This function takes the channel value in MHz and sets
+ * hardware channel value. Assumes writes have been enabled to analog bus.
+ *
+ * Actual Expression,
+ *
+ * For 2GHz channel,
+ * Channel Frequency = (3/4) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^17)
+ * (freq_ref = 40MHz)
+ *
+ * For 5GHz channel,
+ * Channel Frequency = (3/2) * freq_ref * (chansel[8:0] + chanfrac[16:0]/2^10)
+ * (freq_ref = 40MHz/(24>>amodeRefSel))
+ */
+int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 {
+	u16 bMode, fracMode, aModeRefSel = 0;
+	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
+	struct chan_centers centers;
+	u32 refDivA = 24;
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL);
+	reg32 &= 0xc0000000;
+
+	if (freq < 4800) { /* 2 GHz, fractional mode */
+		u32 txctl;
+		int regWrites = 0;
+
+		bMode = 1;
+		fracMode = 1;
+		aModeRefSel = 0;
+		channelSel = (freq * 0x10000) / 15;
+
+		if (AR_SREV_9287_11_OR_LATER(ah)) {
+			if (freq == 2484) {
+				/* Enable channel spreading for channel 14 */
+				REG_WRITE_ARRAY(&ah->iniCckfirJapan2484,
+						1, regWrites);
+			} else {
+				REG_WRITE_ARRAY(&ah->iniCckfirNormal,
+						1, regWrites);
+			}
+		} else {
+			txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+			if (freq == 2484) {
+				/* Enable channel spreading for channel 14 */
+				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+					  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+			} else {
+				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+					  txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN);
+			}
+		}
+	} else {
+		bMode = 0;
+		fracMode = 0;
+
+		switch(ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) {
+		case 0:
+			if ((freq % 20) == 0) {
+				aModeRefSel = 3;
+			} else if ((freq % 10) == 0) {
+				aModeRefSel = 2;
+			}
+			if (aModeRefSel)
+				break;
+		case 1:
+		default:
+			aModeRefSel = 0;
+			/*
+			 * Enable 2G (fractional) mode for channels
+			 * which are 5MHz spaced.
+			 */
+			fracMode = 1;
+			refDivA = 1;
+			channelSel = (freq * 0x8000) / 15;
+
+			/* RefDivA setting */
+			REG_RMW_FIELD(ah, AR_AN_SYNTH9,
+				      AR_AN_SYNTH9_REFDIVA, refDivA);
+
+		}
+
+		if (!fracMode) {
+			ndiv = (freq * (refDivA >> aModeRefSel)) / 60;
+			channelSel = ndiv & 0x1ff;
+			channelFrac = (ndiv & 0xfffffe00) * 2;
+			channelSel = (channelSel << 17) | channelFrac;
+		}
+	}
+
+	reg32 = reg32 |
+	    (bMode << 29) |
+	    (fracMode << 28) | (aModeRefSel << 26) | (channelSel);
+
+	REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
+
+	ah->curchan = chan;
+	ah->curchan_rad_index = -1;
+
+	return 0;
+}
+
+/**
+ * ath9k_hw_9280_spur_mitigate - convert baseband spur frequency
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * For single-chip solutions. Converts to baseband spur frequency given the
+ * input channel frequency and compute register settings below.
+ */
+void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	int bb_spur = AR_NO_SPUR;
+	int freq;
+	int bin, cur_bin;
+	int bb_spur_off, spur_subchannel_sd;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, newVal;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
+	struct chan_centers centers;
+
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
+
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
+
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+	freq = centers.synth_center;
+
+	ah->config.spurmode = SPUR_ENABLE_EEPROM;
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
+
+		if (is2GHz)
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
+		else
+			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
+
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - freq;
+
+		if (IS_CHAN_HT40(chan)) {
+			if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT40) &&
+			    (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT40)) {
+				bb_spur = cur_bb_spur;
+				break;
+			}
+		} else if ((cur_bb_spur > -AR_SPUR_FEEQ_BOUND_HT20) &&
+			   (cur_bb_spur < AR_SPUR_FEEQ_BOUND_HT20)) {
+			bb_spur = cur_bb_spur;
+			break;
+		}
+	}
+
+	if (AR_NO_SPUR == bb_spur) {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+		return;
+	} else {
+		REG_CLR_BIT(ah, AR_PHY_FORCE_CLKEN_CCK,
+			    AR_PHY_FORCE_CLKEN_CCK_MRC_MUX);
+	}
+
+	bin = bb_spur * 320;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+
+	newVal = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+			AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+			AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+			AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), newVal);
+
+	newVal = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+		  AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+		  AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+		  AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+		  SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, newVal);
+
+	if (IS_CHAN_HT40(chan)) {
+		if (bb_spur < 0) {
+			spur_subchannel_sd = 1;
+			bb_spur_off = bb_spur + 10;
+		} else {
+			spur_subchannel_sd = 0;
+			bb_spur_off = bb_spur - 10;
+		}
+	} else {
+		spur_subchannel_sd = 0;
+		bb_spur_off = bb_spur;
+	}
+
+	if (IS_CHAN_HT40(chan))
+		spur_delta_phase =
+			((bb_spur * 262144) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+	else
+		spur_delta_phase =
+			((bb_spur * 524288) /
+			 10) & AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 44 : 40;
+	spur_freq_sd = ((bb_spur_off * 2048) / denominator) & 0x3ff;
+
+	newVal = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+		  SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+		  SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, newVal);
+
+	newVal = spur_subchannel_sd << AR_PHY_SFCORR_SPUR_SUBCHNL_SD_S;
+	REG_WRITE(ah, AR_PHY_SFCORR_EXT, newVal);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
+			}
+			cur_bin += 100;
+		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
+	}
+
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
+
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp_v = abs(cur_vit_mask - bin);
+
+			if (tmp_v < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
+}
+
+/* All code below is for non single-chip solutions */
+
+/**
+ * ath9k_phy_modify_rx_buffer() - perform analog swizzling of parameters
+ * @rfbuf:
+ * @reg32:
+ * @numBits:
+ * @firstBit:
+ * @column:
+ *
+ * Performs analog "swizzling" of parameters into their location.
+ * Used on external AR2133/AR5133 radios.
+ */
+static void ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
+				       u32 numBits, u32 firstBit,
+				       u32 column)
+{
+	u32 tmp32, mask, arrayEntry, lastBit;
+	int32_t bitPosition, bitsLeft;
+
+	tmp32 = ath9k_hw_reverse_bits(reg32, numBits);
+	arrayEntry = (firstBit - 1) / 8;
+	bitPosition = (firstBit - 1) % 8;
+	bitsLeft = numBits;
+	while (bitsLeft > 0) {
+		lastBit = (bitPosition + bitsLeft > 8) ?
+		    8 : bitPosition + bitsLeft;
+		mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) <<
+		    (column * 8);
+		rfBuf[arrayEntry] &= ~mask;
+		rfBuf[arrayEntry] |= ((tmp32 << bitPosition) <<
+				      (column * 8)) & mask;
+		bitsLeft -= 8 - bitPosition;
+		tmp32 = tmp32 >> (8 - bitPosition);
+		bitPosition = 0;
+		arrayEntry++;
+	}
+}
+
+/*
+ * Fix on 2.4 GHz band for orientation sensitivity issue by increasing
+ * rf_pwd_icsyndiv.
+ *
+ * Theoretical Rules:
+ *   if 2 GHz band
+ *      if forceBiasAuto
+ *         if synth_freq < 2412
+ *            bias = 0
+ *         else if 2412 <= synth_freq <= 2422
+ *            bias = 1
+ *         else // synth_freq > 2422
+ *            bias = 2
+ *      else if forceBias > 0
+ *         bias = forceBias & 7
+ *      else
+ *         no change, use value from ini file
+ *   else
+ *      no change, invalid band
+ *
+ *  1st Mod:
+ *    2422 also uses value of 2
+ *    <approved>
+ *
+ *  2nd Mod:
+ *    Less than 2412 uses value of 0, 2412 and above uses value of 2
+ */
+static void ath9k_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u32 tmp_reg;
+	int reg_writes = 0;
+	u32 new_bias = 0;
+
+	if (!AR_SREV_5416(ah) || synth_freq >= 3000) {
+		return;
+	}
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	if (synth_freq < 2412)
+		new_bias = 0;
+	else if (synth_freq < 2422)
+		new_bias = 1;
+	else
+		new_bias = 2;
+
+	/* pre-reverse this field */
+	tmp_reg = ath9k_hw_reverse_bits(new_bias, 3);
+
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Force rf_pwd_icsyndiv to %1d on %4d\n",
+		  new_bias, synth_freq);
+
+	/* swizzle rf_pwd_icsyndiv */
+	ath9k_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3);
+
+	/* write Bank 6 with new params */
+	REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes);
+}
+
+/**
+ * ath9k_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
+ * @ah: atheros hardware stucture
+ * @chan:
+ *
+ * For the external AR2133/AR5133 radios, takes the MHz channel value and set
+ * the channel value. Assumes writes enabled to analog bus and bank6 register
+ * cache in ah->analogBank6Data.
+ */
+int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 channelSel = 0;
 	u32 bModeSynth = 0;
 	u32 aModeRefSel = 0;
@@ -46,9 +559,9 @@
 			channelSel = ((freq - 704) * 2 - 3040) / 10;
 			bModeSynth = 1;
 		} else {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Invalid channel %u MHz\n", freq);
-			return false;
+			ath_print(common, ATH_DBG_FATAL,
+				  "Invalid channel %u MHz\n", freq);
+			return -EINVAL;
 		}
 
 		channelSel = (channelSel << 2) & 0xff;
@@ -79,11 +592,13 @@
 		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
 		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
 	} else {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Invalid channel %u MHz\n", freq);
-		return false;
+		ath_print(common, ATH_DBG_FATAL,
+			  "Invalid channel %u MHz\n", freq);
+		return -EINVAL;
 	}
 
+	ath9k_hw_force_bias(ah, freq);
+
 	reg32 =
 	    (channelSel << 8) | (aModeRefSel << 2) | (bModeSynth << 1) |
 	    (1 << 5) | 0x1;
@@ -93,130 +608,324 @@
 	ah->curchan = chan;
 	ah->curchan_rad_index = -1;
 
-	return true;
+	return 0;
 }
 
-void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
-				 struct ath9k_channel *chan)
+/**
+ * ath9k_hw_spur_mitigate - convert baseband spur frequency for external radios
+ * @ah: atheros hardware structure
+ * @chan:
+ *
+ * For non single-chip solutions. Converts to baseband spur frequency given the
+ * input channel frequency and compute register settings below.
+ */
+void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	u16 bMode, fracMode, aModeRefSel = 0;
-	u32 freq, ndiv, channelSel = 0, channelFrac = 0, reg32 = 0;
-	struct chan_centers centers;
-	u32 refDivA = 24;
+	int bb_spur = AR_NO_SPUR;
+	int bin, cur_bin;
+	int spur_freq_sd;
+	int spur_delta_phase;
+	int denominator;
+	int upper, lower, cur_vit_mask;
+	int tmp, new;
+	int i;
+	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
+			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	};
+	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
+			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	};
+	int inc[4] = { 0, 100, 0, 0 };
 
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-	freq = centers.synth_center;
+	int8_t mask_m[123];
+	int8_t mask_p[123];
+	int8_t mask_amt;
+	int tmp_mask;
+	int cur_bb_spur;
+	bool is2GHz = IS_CHAN_2GHZ(chan);
 
-	reg32 = REG_READ(ah, AR_PHY_SYNTH_CONTROL);
-	reg32 &= 0xc0000000;
+	memset(&mask_m, 0, sizeof(int8_t) * 123);
+	memset(&mask_p, 0, sizeof(int8_t) * 123);
 
-	if (freq < 4800) {
-		u32 txctl;
-
-		bMode = 1;
-		fracMode = 1;
-		aModeRefSel = 0;
-		channelSel = (freq * 0x10000) / 15;
-
-		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
-		if (freq == 2484) {
-
-			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
-		} else {
-			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
+		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+		cur_bb_spur = cur_bb_spur - (chan->channel * 10);
+		if ((cur_bb_spur > -95) && (cur_bb_spur < 95)) {
+			bb_spur = cur_bb_spur;
+			break;
 		}
-	} else {
-		bMode = 0;
-		fracMode = 0;
+	}
 
-		switch(ah->eep_ops->get_eeprom(ah, EEP_FRAC_N_5G)) {
-		case 0:
-			if ((freq % 20) == 0) {
-				aModeRefSel = 3;
-			} else if ((freq % 10) == 0) {
-				aModeRefSel = 2;
+	if (AR_NO_SPUR == bb_spur)
+		return;
+
+	bin = bb_spur * 32;
+
+	tmp = REG_READ(ah, AR_PHY_TIMING_CTRL4(0));
+	new = tmp | (AR_PHY_TIMING_CTRL4_ENABLE_SPUR_RSSI |
+		     AR_PHY_TIMING_CTRL4_ENABLE_SPUR_FILTER |
+		     AR_PHY_TIMING_CTRL4_ENABLE_CHAN_MASK |
+		     AR_PHY_TIMING_CTRL4_ENABLE_PILOT_MASK);
+
+	REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0), new);
+
+	new = (AR_PHY_SPUR_REG_MASK_RATE_CNTL |
+	       AR_PHY_SPUR_REG_ENABLE_MASK_PPM |
+	       AR_PHY_SPUR_REG_MASK_RATE_SELECT |
+	       AR_PHY_SPUR_REG_ENABLE_VIT_SPUR_RSSI |
+	       SM(SPUR_RSSI_THRESH, AR_PHY_SPUR_REG_SPUR_RSSI_THRESH));
+	REG_WRITE(ah, AR_PHY_SPUR_REG, new);
+
+	spur_delta_phase = ((bb_spur * 524288) / 100) &
+		AR_PHY_TIMING11_SPUR_DELTA_PHASE;
+
+	denominator = IS_CHAN_2GHZ(chan) ? 440 : 400;
+	spur_freq_sd = ((bb_spur * 2048) / denominator) & 0x3ff;
+
+	new = (AR_PHY_TIMING11_USE_SPUR_IN_AGC |
+	       SM(spur_freq_sd, AR_PHY_TIMING11_SPUR_FREQ_SD) |
+	       SM(spur_delta_phase, AR_PHY_TIMING11_SPUR_DELTA_PHASE));
+	REG_WRITE(ah, AR_PHY_TIMING11, new);
+
+	cur_bin = -6000;
+	upper = bin + 100;
+	lower = bin - 100;
+
+	for (i = 0; i < 4; i++) {
+		int pilot_mask = 0;
+		int chan_mask = 0;
+		int bp = 0;
+		for (bp = 0; bp < 30; bp++) {
+			if ((cur_bin > lower) && (cur_bin < upper)) {
+				pilot_mask = pilot_mask | 0x1 << bp;
+				chan_mask = chan_mask | 0x1 << bp;
 			}
-			if (aModeRefSel)
-				break;
-		case 1:
-		default:
-			aModeRefSel = 0;
-			fracMode = 1;
-			refDivA = 1;
-			channelSel = (freq * 0x8000) / 15;
-
-			REG_RMW_FIELD(ah, AR_AN_SYNTH9,
-				      AR_AN_SYNTH9_REFDIVA, refDivA);
-
+			cur_bin += 100;
 		}
-
-		if (!fracMode) {
-			ndiv = (freq * (refDivA >> aModeRefSel)) / 60;
-			channelSel = ndiv & 0x1ff;
-			channelFrac = (ndiv & 0xfffffe00) * 2;
-			channelSel = (channelSel << 17) | channelFrac;
-		}
+		cur_bin += inc[i];
+		REG_WRITE(ah, pilot_mask_reg[i], pilot_mask);
+		REG_WRITE(ah, chan_mask_reg[i], chan_mask);
 	}
 
-	reg32 = reg32 |
-	    (bMode << 29) |
-	    (fracMode << 28) | (aModeRefSel << 26) | (channelSel);
+	cur_vit_mask = 6100;
+	upper = bin + 120;
+	lower = bin - 120;
 
-	REG_WRITE(ah, AR_PHY_SYNTH_CONTROL, reg32);
+	for (i = 0; i < 123; i++) {
+		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
 
-	ah->curchan = chan;
-	ah->curchan_rad_index = -1;
+			/* workaround for gcc bug #37014 */
+			volatile int tmp_v = abs(cur_vit_mask - bin);
+
+			if (tmp_v < 75)
+				mask_amt = 1;
+			else
+				mask_amt = 0;
+			if (cur_vit_mask < 0)
+				mask_m[abs(cur_vit_mask / 100)] = mask_amt;
+			else
+				mask_p[cur_vit_mask / 100] = mask_amt;
+		}
+		cur_vit_mask -= 100;
+	}
+
+	tmp_mask = (mask_m[46] << 30) | (mask_m[47] << 28)
+		| (mask_m[48] << 26) | (mask_m[49] << 24)
+		| (mask_m[50] << 22) | (mask_m[51] << 20)
+		| (mask_m[52] << 18) | (mask_m[53] << 16)
+		| (mask_m[54] << 14) | (mask_m[55] << 12)
+		| (mask_m[56] << 10) | (mask_m[57] << 8)
+		| (mask_m[58] << 6) | (mask_m[59] << 4)
+		| (mask_m[60] << 2) | (mask_m[61] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_VIT_MASK2_M_46_61, tmp_mask);
+
+	tmp_mask = (mask_m[31] << 28)
+		| (mask_m[32] << 26) | (mask_m[33] << 24)
+		| (mask_m[34] << 22) | (mask_m[35] << 20)
+		| (mask_m[36] << 18) | (mask_m[37] << 16)
+		| (mask_m[48] << 14) | (mask_m[39] << 12)
+		| (mask_m[40] << 10) | (mask_m[41] << 8)
+		| (mask_m[42] << 6) | (mask_m[43] << 4)
+		| (mask_m[44] << 2) | (mask_m[45] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_31_45, tmp_mask);
+
+	tmp_mask = (mask_m[16] << 30) | (mask_m[16] << 28)
+		| (mask_m[18] << 26) | (mask_m[18] << 24)
+		| (mask_m[20] << 22) | (mask_m[20] << 20)
+		| (mask_m[22] << 18) | (mask_m[22] << 16)
+		| (mask_m[24] << 14) | (mask_m[24] << 12)
+		| (mask_m[25] << 10) | (mask_m[26] << 8)
+		| (mask_m[27] << 6) | (mask_m[28] << 4)
+		| (mask_m[29] << 2) | (mask_m[30] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_16_30, tmp_mask);
+
+	tmp_mask = (mask_m[0] << 30) | (mask_m[1] << 28)
+		| (mask_m[2] << 26) | (mask_m[3] << 24)
+		| (mask_m[4] << 22) | (mask_m[5] << 20)
+		| (mask_m[6] << 18) | (mask_m[7] << 16)
+		| (mask_m[8] << 14) | (mask_m[9] << 12)
+		| (mask_m[10] << 10) | (mask_m[11] << 8)
+		| (mask_m[12] << 6) | (mask_m[13] << 4)
+		| (mask_m[14] << 2) | (mask_m[15] << 0);
+	REG_WRITE(ah, AR_PHY_MASK_CTL, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_M_00_15, tmp_mask);
+
+	tmp_mask = (mask_p[15] << 28)
+		| (mask_p[14] << 26) | (mask_p[13] << 24)
+		| (mask_p[12] << 22) | (mask_p[11] << 20)
+		| (mask_p[10] << 18) | (mask_p[9] << 16)
+		| (mask_p[8] << 14) | (mask_p[7] << 12)
+		| (mask_p[6] << 10) | (mask_p[5] << 8)
+		| (mask_p[4] << 6) | (mask_p[3] << 4)
+		| (mask_p[2] << 2) | (mask_p[1] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_1, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_15_01, tmp_mask);
+
+	tmp_mask = (mask_p[30] << 28)
+		| (mask_p[29] << 26) | (mask_p[28] << 24)
+		| (mask_p[27] << 22) | (mask_p[26] << 20)
+		| (mask_p[25] << 18) | (mask_p[24] << 16)
+		| (mask_p[23] << 14) | (mask_p[22] << 12)
+		| (mask_p[21] << 10) | (mask_p[20] << 8)
+		| (mask_p[19] << 6) | (mask_p[18] << 4)
+		| (mask_p[17] << 2) | (mask_p[16] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_2, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_30_16, tmp_mask);
+
+	tmp_mask = (mask_p[45] << 28)
+		| (mask_p[44] << 26) | (mask_p[43] << 24)
+		| (mask_p[42] << 22) | (mask_p[41] << 20)
+		| (mask_p[40] << 18) | (mask_p[39] << 16)
+		| (mask_p[38] << 14) | (mask_p[37] << 12)
+		| (mask_p[36] << 10) | (mask_p[35] << 8)
+		| (mask_p[34] << 6) | (mask_p[33] << 4)
+		| (mask_p[32] << 2) | (mask_p[31] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_3, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_45_31, tmp_mask);
+
+	tmp_mask = (mask_p[61] << 30) | (mask_p[60] << 28)
+		| (mask_p[59] << 26) | (mask_p[58] << 24)
+		| (mask_p[57] << 22) | (mask_p[56] << 20)
+		| (mask_p[55] << 18) | (mask_p[54] << 16)
+		| (mask_p[53] << 14) | (mask_p[52] << 12)
+		| (mask_p[51] << 10) | (mask_p[50] << 8)
+		| (mask_p[49] << 6) | (mask_p[48] << 4)
+		| (mask_p[47] << 2) | (mask_p[46] << 0);
+	REG_WRITE(ah, AR_PHY_BIN_MASK2_4, tmp_mask);
+	REG_WRITE(ah, AR_PHY_MASK2_P_61_45, tmp_mask);
 }
 
-static void
-ath9k_phy_modify_rx_buffer(u32 *rfBuf, u32 reg32,
-			   u32 numBits, u32 firstBit,
-			   u32 column)
+/**
+ * ath9k_hw_rf_alloc_ext_banks - allocates banks for external radio programming
+ * @ah: atheros hardware structure
+ *
+ * Only required for older devices with external AR2133/AR5133 radios.
+ */
+int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah)
 {
-	u32 tmp32, mask, arrayEntry, lastBit;
-	int32_t bitPosition, bitsLeft;
+#define ATH_ALLOC_BANK(bank, size) do { \
+		bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \
+		if (!bank) { \
+			ath_print(common, ATH_DBG_FATAL, \
+				  "Cannot allocate RF banks\n"); \
+			return -ENOMEM; \
+		} \
+	} while (0);
 
-	tmp32 = ath9k_hw_reverse_bits(reg32, numBits);
-	arrayEntry = (firstBit - 1) / 8;
-	bitPosition = (firstBit - 1) % 8;
-	bitsLeft = numBits;
-	while (bitsLeft > 0) {
-		lastBit = (bitPosition + bitsLeft > 8) ?
-		    8 : bitPosition + bitsLeft;
-		mask = (((1 << lastBit) - 1) ^ ((1 << bitPosition) - 1)) <<
-		    (column * 8);
-		rfBuf[arrayEntry] &= ~mask;
-		rfBuf[arrayEntry] |= ((tmp32 << bitPosition) <<
-				      (column * 8)) & mask;
-		bitsLeft -= 8 - bitPosition;
-		tmp32 = tmp32 >> (8 - bitPosition);
-		bitPosition = 0;
-		arrayEntry++;
-	}
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows);
+	ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
+	ATH_ALLOC_BANK(ah->addac5416_21,
+		       ah->iniAddac.ia_rows * ah->iniAddac.ia_columns);
+	ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows);
+
+	return 0;
+#undef ATH_ALLOC_BANK
 }
 
-bool
-ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
-		     u16 modesIndex)
+
+/**
+ * ath9k_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers
+ * @ah: atheros hardware struture
+ * For the external AR2133/AR5133 radios banks.
+ */
+void
+ath9k_hw_rf_free_ext_banks(struct ath_hw *ah)
+{
+#define ATH_FREE_BANK(bank) do { \
+		kfree(bank); \
+		bank = NULL; \
+	} while (0);
+
+	BUG_ON(AR_SREV_9280_10_OR_LATER(ah));
+
+	ATH_FREE_BANK(ah->analogBank0Data);
+	ATH_FREE_BANK(ah->analogBank1Data);
+	ATH_FREE_BANK(ah->analogBank2Data);
+	ATH_FREE_BANK(ah->analogBank3Data);
+	ATH_FREE_BANK(ah->analogBank6Data);
+	ATH_FREE_BANK(ah->analogBank6TPCData);
+	ATH_FREE_BANK(ah->analogBank7Data);
+	ATH_FREE_BANK(ah->addac5416_21);
+	ATH_FREE_BANK(ah->bank6Temp);
+
+#undef ATH_FREE_BANK
+}
+
+/* *
+ * ath9k_hw_set_rf_regs - programs rf registers based on EEPROM
+ * @ah: atheros hardware structure
+ * @chan:
+ * @modesIndex:
+ *
+ * Used for the external AR2133/AR5133 radios.
+ *
+ * Reads the EEPROM header info from the device structure and programs
+ * all rf registers. This routine requires access to the analog
+ * rf device. This is not required for single-chip devices.
+ */
+bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan,
+			  u16 modesIndex)
 {
 	u32 eepMinorRev;
 	u32 ob5GHz = 0, db5GHz = 0;
 	u32 ob2GHz = 0, db2GHz = 0;
 	int regWrites = 0;
 
+	/*
+	 * Software does not need to program bank data
+	 * for single chip devices, that is AR9280 or anything
+	 * after that.
+	 */
 	if (AR_SREV_9280_10_OR_LATER(ah))
 		return true;
 
+	/* Setup rf parameters */
 	eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV);
 
+	/* Setup Bank 0 Write */
 	RF_BANK_SETUP(ah->analogBank0Data, &ah->iniBank0, 1);
 
+	/* Setup Bank 1 Write */
 	RF_BANK_SETUP(ah->analogBank1Data, &ah->iniBank1, 1);
 
+	/* Setup Bank 2 Write */
 	RF_BANK_SETUP(ah->analogBank2Data, &ah->iniBank2, 1);
 
+	/* Setup Bank 6 Write */
 	RF_BANK_SETUP(ah->analogBank3Data, &ah->iniBank3,
 		      modesIndex);
 	{
@@ -227,6 +936,7 @@
 		}
 	}
 
+	/* Only the 5 or 2 GHz OB/DB need to be set for a mode */
 	if (eepMinorRev >= 2) {
 		if (IS_CHAN_2GHZ(chan)) {
 			ob2GHz = ah->eep_ops->get_eeprom(ah, EEP_OB_2);
@@ -245,8 +955,10 @@
 		}
 	}
 
+	/* Setup Bank 7 Setup */
 	RF_BANK_SETUP(ah->analogBank7Data, &ah->iniBank7, 1);
 
+	/* Write Analog registers */
 	REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data,
 			   regWrites);
 	REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data,
@@ -262,137 +974,3 @@
 
 	return true;
 }
-
-void
-ath9k_hw_rf_free(struct ath_hw *ah)
-{
-#define ATH_FREE_BANK(bank) do { \
-		kfree(bank); \
-		bank = NULL; \
-	} while (0);
-
-	ATH_FREE_BANK(ah->analogBank0Data);
-	ATH_FREE_BANK(ah->analogBank1Data);
-	ATH_FREE_BANK(ah->analogBank2Data);
-	ATH_FREE_BANK(ah->analogBank3Data);
-	ATH_FREE_BANK(ah->analogBank6Data);
-	ATH_FREE_BANK(ah->analogBank6TPCData);
-	ATH_FREE_BANK(ah->analogBank7Data);
-	ATH_FREE_BANK(ah->addac5416_21);
-	ATH_FREE_BANK(ah->bank6Temp);
-#undef ATH_FREE_BANK
-}
-
-bool ath9k_hw_init_rf(struct ath_hw *ah, int *status)
-{
-	if (!AR_SREV_9280_10_OR_LATER(ah)) {
-		ah->analogBank0Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank0.ia_rows), GFP_KERNEL);
-		ah->analogBank1Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank1.ia_rows), GFP_KERNEL);
-		ah->analogBank2Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank2.ia_rows), GFP_KERNEL);
-		ah->analogBank3Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank3.ia_rows), GFP_KERNEL);
-		ah->analogBank6Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank6.ia_rows), GFP_KERNEL);
-		ah->analogBank6TPCData =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank6TPC.ia_rows), GFP_KERNEL);
-		ah->analogBank7Data =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank7.ia_rows), GFP_KERNEL);
-
-		if (ah->analogBank0Data == NULL
-		    || ah->analogBank1Data == NULL
-		    || ah->analogBank2Data == NULL
-		    || ah->analogBank3Data == NULL
-		    || ah->analogBank6Data == NULL
-		    || ah->analogBank6TPCData == NULL
-		    || ah->analogBank7Data == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Cannot allocate RF banks\n");
-			*status = -ENOMEM;
-			return false;
-		}
-
-		ah->addac5416_21 =
-		    kzalloc((sizeof(u32) *
-			     ah->iniAddac.ia_rows *
-			     ah->iniAddac.ia_columns), GFP_KERNEL);
-		if (ah->addac5416_21 == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Cannot allocate addac5416_21\n");
-			*status = -ENOMEM;
-			return false;
-		}
-
-		ah->bank6Temp =
-		    kzalloc((sizeof(u32) *
-			     ah->iniBank6.ia_rows), GFP_KERNEL);
-		if (ah->bank6Temp == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Cannot allocate bank6Temp\n");
-			*status = -ENOMEM;
-			return false;
-		}
-	}
-
-	return true;
-}
-
-void
-ath9k_hw_decrease_chain_power(struct ath_hw *ah, struct ath9k_channel *chan)
-{
-	int i, regWrites = 0;
-	u32 bank6SelMask;
-	u32 *bank6Temp = ah->bank6Temp;
-
-	switch (ah->config.diversity_control) {
-	case ATH9K_ANT_FIXED_A:
-		bank6SelMask =
-		    (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
-			REDUCE_CHAIN_0 : REDUCE_CHAIN_1;
-		break;
-	case ATH9K_ANT_FIXED_B:
-		bank6SelMask =
-		    (ah->config.antenna_switch_swap & ANTSWAP_AB) ?
-			REDUCE_CHAIN_1 : REDUCE_CHAIN_0;
-		break;
-	case ATH9K_ANT_VARIABLE:
-		return;
-		break;
-	default:
-		return;
-		break;
-	}
-
-	for (i = 0; i < ah->iniBank6.ia_rows; i++)
-		bank6Temp[i] = ah->analogBank6Data[i];
-
-	REG_WRITE(ah, AR_PHY_BASE + 0xD8, bank6SelMask);
-
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 189, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 190, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 191, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 192, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 193, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 222, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 245, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 246, 0);
-	ath9k_phy_modify_rx_buffer(bank6Temp, 1, 1, 247, 0);
-
-	REG_WRITE_RF_ARRAY(&ah->iniBank6, bank6Temp, regWrites);
-
-	REG_WRITE(ah, AR_PHY_BASE + 0xD8, 0x00000053);
-#ifdef ALTER_SWITCH
-	REG_WRITE(ah, PHY_SWITCH_CHAIN_0,
-		  (REG_READ(ah, PHY_SWITCH_CHAIN_0) & ~0x38)
-		  | ((REG_READ(ah, PHY_SWITCH_CHAIN_0) >> 3) & 0x38));
-#endif
-}
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index dfda6f4..31de27d 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -17,20 +17,23 @@
 #ifndef PHY_H
 #define PHY_H
 
-void ath9k_hw_ar9280_set_channel(struct ath_hw *ah,
-				 struct ath9k_channel
-				 *chan);
-bool ath9k_hw_set_channel(struct ath_hw *ah,
-			  struct ath9k_channel *chan);
-void ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex,
-			 u32 freqIndex, int regWrites);
+/* Common between single chip and non single-chip solutions */
+void ath9k_hw_write_regs(struct ath_hw *ah, u32 freqIndex, int regWrites);
+
+/* Single chip radio settings */
+int ath9k_hw_ar9280_set_channel(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
+
+/* Routines below are for non single-chip solutions */
+int ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan);
+void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
+
+int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah);
+void ath9k_hw_rf_free_ext_banks(struct ath_hw *ah);
+
 bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 			  struct ath9k_channel *chan,
 			  u16 modesIndex);
-void ath9k_hw_decrease_chain_power(struct ath_hw *ah,
-				   struct ath9k_channel *chan);
-bool ath9k_hw_init_rf(struct ath_hw *ah,
-		      int *status);
 
 #define AR_PHY_BASE     0x9800
 #define AR_PHY(_n)      (AR_PHY_BASE + ((_n)<<2))
@@ -45,6 +48,7 @@
 #define AR_PHY_FC_DYN2040_EN        0x00000004
 #define AR_PHY_FC_DYN2040_PRI_ONLY  0x00000008
 #define AR_PHY_FC_DYN2040_PRI_CH    0x00000010
+/* For 25 MHz channel spacing -- not used but supported by hw */
 #define AR_PHY_FC_DYN2040_EXT_CH    0x00000020
 #define AR_PHY_FC_HT_EN             0x00000040
 #define AR_PHY_FC_SHORT_GI_40       0x00000080
@@ -185,8 +189,20 @@
 #define AR_PHY_PLL_CTL_44_2133  0xeb
 #define AR_PHY_PLL_CTL_40_2133  0xea
 
-#define AR_PHY_SPECTRAL_SCAN		0x9912
-#define AR_PHY_SPECTRAL_SCAN_ENABLE	0x1
+#define AR_PHY_SPECTRAL_SCAN			0x9910  /* AR9280 spectral scan configuration register */
+#define	AR_PHY_SPECTRAL_SCAN_ENABLE		0x1
+#define AR_PHY_SPECTRAL_SCAN_ENA		0x00000001  /* Enable spectral scan, reg 68, bit 0 */
+#define AR_PHY_SPECTRAL_SCAN_ENA_S		0  /* Enable spectral scan, reg 68, bit 0 */
+#define AR_PHY_SPECTRAL_SCAN_ACTIVE		0x00000002  /* Activate spectral scan reg 68, bit 1*/
+#define AR_PHY_SPECTRAL_SCAN_ACTIVE_S		1  /* Activate spectral scan reg 68, bit 1*/
+#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD		0x000000F0  /* Interval for FFT reports, reg 68, bits 4-7*/
+#define AR_PHY_SPECTRAL_SCAN_FFT_PERIOD_S	4
+#define AR_PHY_SPECTRAL_SCAN_PERIOD		0x0000FF00  /* Interval for FFT reports, reg 68, bits 8-15*/
+#define AR_PHY_SPECTRAL_SCAN_PERIOD_S		8
+#define AR_PHY_SPECTRAL_SCAN_COUNT		0x00FF0000  /* Number of reports, reg 68, bits 16-23*/
+#define AR_PHY_SPECTRAL_SCAN_COUNT_S		16
+#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT	0x01000000  /* Short repeat, reg 68, bit 24*/
+#define AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT_S	24  /* Short repeat, reg 68, bit 24*/
 
 #define AR_PHY_RX_DELAY           0x9914
 #define AR_PHY_SEARCH_START_DELAY 0x9918
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 1895d63..c915954 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -19,133 +19,92 @@
 
 static const struct ath_rate_table ar5416_11na_ratetable = {
 	42,
+	8, /* MCS start */
 	{
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
-			5400, 0x0b, 0x00, 12,
-			0, 0, 0, 0, 0, 0 },
+			5400, 0, 12, 0, 0, 0, 0, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
-			7800,  0x0f, 0x00, 18,
-			0, 1, 1, 1, 1, 0 },
+			7800,  1, 18, 0, 1, 1, 1, 1 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
-			10000, 0x0a, 0x00, 24,
-			2, 2, 2, 2, 2, 0 },
+			10000, 2, 24, 2, 2, 2, 2, 2 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
-			13900, 0x0e, 0x00, 36,
-			2,  3, 3, 3, 3, 0 },
+			13900, 3, 36, 2, 3, 3, 3, 3 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
-			17300, 0x09, 0x00, 48,
-			4,  4, 4, 4, 4, 0 },
+			17300, 4, 48, 4, 4, 4, 4, 4 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
-			23000, 0x0d, 0x00, 72,
-			4,  5, 5, 5, 5, 0 },
+			23000, 5, 72, 4, 5, 5, 5, 5 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
-			27400, 0x08, 0x00, 96,
-			4,  6, 6, 6, 6, 0 },
+			27400, 6, 96, 4, 6, 6, 6, 6 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
-			29300, 0x0c, 0x00, 108,
-			4,  7, 7, 7, 7, 0 },
+			29300, 7, 108, 4, 7, 7, 7, 7 },
 		{ VALID_2040, VALID_2040, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
-			6400, 0x80, 0x00, 0,
-			0, 8, 24, 8, 24, 3216 },
+			6400, 0, 0, 0, 8, 24, 8, 24 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */
-			12700, 0x81, 0x00, 1,
-			2, 9, 25, 9, 25, 6434 },
+			12700, 1, 1, 2, 9, 25, 9, 25 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */
-			18800, 0x82, 0x00, 2,
-			2, 10, 26, 10, 26, 9650 },
+			18800, 2, 2, 2, 10, 26, 10, 26 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */
-			25000, 0x83, 0x00, 3,
-			4,  11, 27, 11, 27, 12868 },
+			25000, 3, 3, 4, 11, 27, 11, 27 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */
-			36700, 0x84, 0x00, 4,
-			4,  12, 28, 12, 28, 19304 },
+			36700, 4, 4, 4, 12, 28, 12, 28 },
 		{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */
-			48100, 0x85, 0x00, 5,
-			4,  13, 29, 13, 29, 25740 },
+			48100, 5, 5, 4, 13, 29, 13, 29 },
 		{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */
-			53500, 0x86, 0x00, 6,
-			4,  14, 30, 14, 30,  28956 },
+			53500, 6, 6, 4, 14, 30, 14, 30 },
 		{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */
-			59000, 0x87, 0x00, 7,
-			4,  15, 31, 15, 32, 32180 },
+			59000, 7, 7, 4, 15, 31, 15, 32 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */
-			12700, 0x88, 0x00,
-			8, 3, 16, 33, 16, 33, 6430 },
+			12700, 8, 8, 3, 16, 33, 16, 33 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */
-			24800, 0x89, 0x00, 9,
-			2, 17, 34, 17, 34, 12860 },
+			24800, 9, 9, 2, 17, 34, 17, 34 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */
-			36600, 0x8a, 0x00, 10,
-			2, 18, 35, 18, 35, 19300 },
+			36600, 10, 10, 2, 18, 35, 18, 35 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */
-			48100, 0x8b, 0x00, 11,
-			4,  19, 36, 19, 36, 25736 },
+			48100, 11, 11, 4, 19, 36, 19, 36 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */
-			69500, 0x8c, 0x00, 12,
-			4,  20, 37, 20, 37, 38600 },
+			69500, 12, 12, 4, 20, 37, 20, 37 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */
-			89500, 0x8d, 0x00, 13,
-			4,  21, 38, 21, 38, 51472 },
+			89500, 13, 13, 4, 21, 38, 21, 38 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */
-			98900, 0x8e, 0x00, 14,
-			4,  22, 39, 22, 39, 57890 },
+			98900, 14, 14, 4, 22, 39, 22, 39 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */
-			108300, 0x8f, 0x00, 15,
-			4,  23, 40, 23, 41, 64320 },
+			108300, 15, 15, 4, 23, 40, 23, 41 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */
-			13200, 0x80, 0x00, 0,
-			0, 8, 24, 24, 24, 6684 },
+			13200, 0, 0, 0, 8, 24, 24, 24 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */
-			25900, 0x81, 0x00, 1,
-			2, 9, 25, 25, 25, 13368 },
+			25900, 1, 1, 2, 9, 25, 25, 25 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */
-			38600, 0x82, 0x00, 2,
-			2, 10, 26, 26, 26, 20052 },
+			38600, 2, 2, 2, 10, 26, 26, 26 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */
-			49800, 0x83, 0x00, 3,
-			4,  11, 27, 27, 27, 26738 },
+			49800, 3, 3, 4, 11, 27, 27, 27 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */
-			72200, 0x84, 0x00, 4,
-			4,  12, 28, 28, 28, 40104 },
+			72200, 4, 4, 4, 12, 28, 28, 28 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */
-			92900, 0x85, 0x00, 5,
-			4,  13, 29, 29, 29, 53476 },
+			92900, 5, 5, 4, 13, 29, 29, 29 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */
-			102700, 0x86, 0x00, 6,
-			4,  14, 30, 30, 30, 60156 },
+			102700, 6, 6, 4, 14, 30, 30, 30 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */
-			112000, 0x87, 0x00, 7,
-			4,  15, 31, 32, 32, 66840 },
+			112000, 7, 7, 4, 15, 31, 32, 32 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
-			122000, 0x87, 0x00, 7,
-			4,  15, 31, 32, 32, 74200 },
+			122000, 7, 7, 4, 15, 31, 32, 32 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */
-			25800, 0x88, 0x00, 8,
-			0, 16, 33, 33, 33, 13360 },
+			25800, 8, 8, 0, 16, 33, 33, 33 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */
-			49800, 0x89, 0x00, 9,
-			2, 17, 34, 34, 34, 26720 },
+			49800, 9, 9, 2, 17, 34, 34, 34 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */
-			71900, 0x8a, 0x00, 10,
-			2, 18, 35, 35, 35, 40080 },
+			71900, 10, 10, 2, 18, 35, 35, 35 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */
-			92500, 0x8b, 0x00, 11,
-			4,  19, 36, 36, 36, 53440 },
+			92500, 11, 11, 4, 19, 36, 36, 36 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */
-			130300, 0x8c, 0x00, 12,
-			4,  20, 37, 37, 37, 80160 },
+			130300, 12, 12, 4, 20, 37, 37, 37 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */
-			162800, 0x8d, 0x00, 13,
-			4,  21, 38, 38, 38, 106880 },
+			162800, 13, 13, 4, 21, 38, 38, 38 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */
-			178200, 0x8e, 0x00, 14,
-			4,  22, 39, 39, 39, 120240 },
+			178200, 14, 14, 4, 22, 39, 39, 39 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */
-			192100, 0x8f, 0x00, 15,
-			4,  23, 40, 41, 41, 133600 },
+			192100, 15, 15, 4, 23, 40, 41, 41 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
-			207000, 0x8f, 0x00, 15,
-			4,  23, 40, 41, 41, 148400 },
+			207000, 15, 15, 4, 23, 40, 41, 41 },
 	},
 	50,  /* probe interval */
 	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
@@ -156,177 +115,125 @@
 
 static const struct ath_rate_table ar5416_11ng_ratetable = {
 	46,
+	12, /* MCS start */
 	{
 		{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
-			900, 0x1b, 0x00, 2,
-			0, 0, 0, 0, 0, 0 },
+			900, 0, 2, 0, 0, 0, 0, 0 },
 		{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
-			1900, 0x1a, 0x04, 4,
-			1, 1, 1, 1, 1, 0 },
+			1900, 1, 4, 1, 1, 1, 1, 1 },
 		{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
-			4900, 0x19, 0x04, 11,
-			2, 2, 2, 2, 2, 0 },
+			4900, 2, 11, 2, 2, 2, 2, 2 },
 		{ VALID_ALL, VALID_ALL, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
-			8100, 0x18, 0x04, 22,
-			3, 3, 3, 3, 3, 0 },
+			8100, 3, 22, 3, 3, 3, 3, 3 },
 		{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
-			5400, 0x0b, 0x00, 12,
-			4, 4, 4, 4, 4, 0 },
+			5400, 4, 12, 4, 4, 4, 4, 4 },
 		{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
-			7800, 0x0f, 0x00, 18,
-			4, 5, 5, 5, 5, 0 },
+			7800, 5, 18, 4, 5, 5, 5, 5 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
-			10100, 0x0a, 0x00, 24,
-			6, 6, 6, 6, 6, 0 },
+			10100, 6, 24, 6, 6, 6, 6, 6 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
-			14100,  0x0e, 0x00, 36,
-			6, 7, 7, 7, 7, 0 },
+			14100, 7, 36, 6, 7, 7, 7, 7 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
-			17700, 0x09, 0x00, 48,
-			8,  8, 8, 8, 8, 0 },
+			17700, 8, 48, 8, 8, 8, 8, 8 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
-			23700, 0x0d, 0x00, 72,
-			8,  9, 9, 9, 9, 0 },
+			23700, 9, 72, 8, 9, 9, 9, 9 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
-			27400, 0x08, 0x00, 96,
-			8,  10, 10, 10, 10, 0 },
+			27400, 10, 96, 8, 10, 10, 10, 10 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
-			30900, 0x0c, 0x00, 108,
-			8,  11, 11, 11, 11, 0 },
+			30900, 11, 108, 8, 11, 11, 11, 11 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_SS, 6500, /* 6.5 Mb */
-			6400, 0x80, 0x00, 0,
-			4, 12, 28, 12, 28, 3216 },
+			6400, 0, 0, 4, 12, 28, 12, 28 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 13000, /* 13 Mb */
-			12700, 0x81, 0x00, 1,
-			6, 13, 29, 13, 29, 6434 },
+			12700, 1, 1, 6, 13, 29, 13, 29 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 19500, /* 19.5 Mb */
-			18800, 0x82, 0x00, 2,
-			6, 14, 30, 14, 30, 9650 },
+			18800, 2, 2, 6, 14, 30, 14, 30 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 26000, /* 26 Mb */
-			25000, 0x83, 0x00, 3,
-			8,  15, 31, 15, 31, 12868 },
+			25000, 3, 3, 8, 15, 31, 15, 31 },
 		{ VALID_20, VALID_20, WLAN_RC_PHY_HT_20_SS, 39000, /* 39 Mb */
-			36700, 0x84, 0x00, 4,
-			8,  16, 32, 16, 32, 19304 },
+			36700, 4, 4, 8, 16, 32, 16, 32 },
 		{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 52000, /* 52 Mb */
-			48100, 0x85, 0x00, 5,
-			8,  17, 33, 17, 33, 25740 },
+			48100, 5, 5, 8, 17, 33, 17, 33 },
 		{ INVALID,  VALID_20, WLAN_RC_PHY_HT_20_SS, 58500, /* 58.5 Mb */
-			53500, 0x86, 0x00, 6,
-			8,  18, 34, 18, 34, 28956 },
+			53500, 6, 6, 8, 18, 34, 18, 34 },
 		{ INVALID, VALID_20, WLAN_RC_PHY_HT_20_SS, 65000, /* 65 Mb */
-			59000, 0x87, 0x00, 7,
-			8,  19, 35, 19, 36, 32180 },
+			59000, 7, 7, 8, 19, 35, 19, 36 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 13000, /* 13 Mb */
-			12700, 0x88, 0x00, 8,
-			4, 20, 37, 20, 37, 6430 },
+			12700, 8, 8, 4, 20, 37, 20, 37 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 26000, /* 26 Mb */
-			24800, 0x89, 0x00, 9,
-			6, 21, 38, 21, 38, 12860 },
+			24800, 9, 9, 6, 21, 38, 21, 38 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_20_DS, 39000, /* 39 Mb */
-			36600, 0x8a, 0x00, 10,
-			6, 22, 39, 22, 39, 19300 },
+			36600, 10, 10, 6, 22, 39, 22, 39 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 52000, /* 52 Mb */
-			48100, 0x8b, 0x00, 11,
-			8,  23, 40, 23, 40, 25736 },
+			48100, 11, 11, 8, 23, 40, 23, 40 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 78000, /* 78 Mb */
-			69500, 0x8c, 0x00, 12,
-			8,  24, 41, 24, 41, 38600 },
+			69500, 12, 12, 8, 24, 41, 24, 41 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 104000, /* 104 Mb */
-			89500, 0x8d, 0x00, 13,
-			8,  25, 42, 25, 42, 51472 },
+			89500, 13, 13, 8, 25, 42, 25, 42 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 117000, /* 117 Mb */
-			98900, 0x8e, 0x00, 14,
-			8,  26, 43, 26, 44, 57890 },
+			98900, 14, 14, 8, 26, 43, 26, 44 },
 		{ VALID_20, INVALID, WLAN_RC_PHY_HT_20_DS, 130000, /* 130 Mb */
-			108300, 0x8f, 0x00, 15,
-			8,  27, 44, 27, 45, 64320 },
+			108300, 15, 15, 8, 27, 44, 27, 45 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 13500, /* 13.5 Mb */
-			13200, 0x80, 0x00, 0,
-			8, 12, 28, 28, 28, 6684 },
+			13200, 0, 0, 8, 12, 28, 28, 28 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 27500, /* 27.0 Mb */
-			25900, 0x81, 0x00, 1,
-			8, 13, 29, 29, 29, 13368 },
+			25900, 1, 1, 8, 13, 29, 29, 29 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 40500, /* 40.5 Mb */
-			38600, 0x82, 0x00, 2,
-			8, 14, 30, 30, 30, 20052 },
+			38600, 2, 2, 8, 14, 30, 30, 30 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 54000, /* 54 Mb */
-			49800, 0x83, 0x00, 3,
-			8,  15, 31, 31, 31, 26738 },
+			49800, 3, 3, 8,  15, 31, 31, 31 },
 		{ VALID_40, VALID_40, WLAN_RC_PHY_HT_40_SS, 81500, /* 81 Mb */
-			72200, 0x84, 0x00, 4,
-			8,  16, 32, 32, 32, 40104 },
+			72200, 4, 4, 8, 16, 32, 32, 32 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 108000, /* 108 Mb */
-			92900, 0x85, 0x00, 5,
-			8,  17, 33, 33, 33, 53476 },
+			92900, 5, 5, 8, 17, 33, 33, 33 },
 		{ INVALID,  VALID_40, WLAN_RC_PHY_HT_40_SS, 121500, /* 121.5 Mb */
-			102700, 0x86, 0x00, 6,
-			8,  18, 34, 34, 34, 60156 },
+			102700, 6, 6, 8, 18, 34, 34, 34 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS, 135000, /* 135 Mb */
-			112000, 0x87, 0x00, 7,
-			8,  19, 35, 36, 36, 66840 },
+			112000, 7, 7, 8, 19, 35, 36, 36 },
 		{ INVALID, VALID_40, WLAN_RC_PHY_HT_40_SS_HGI, 150000, /* 150 Mb */
-			122000, 0x87, 0x00, 7,
-			8,  19, 35, 36, 36, 74200 },
+			122000, 7, 7, 8, 19, 35, 36, 36 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 27000, /* 27 Mb */
-			25800, 0x88, 0x00, 8,
-			8, 20, 37, 37, 37, 13360 },
+			25800, 8, 8, 8, 20, 37, 37, 37 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 54000, /* 54 Mb */
-			49800, 0x89, 0x00, 9,
-			8, 21, 38, 38, 38, 26720 },
+			49800, 9, 9, 8, 21, 38, 38, 38 },
 		{ INVALID, INVALID, WLAN_RC_PHY_HT_40_DS, 81000, /* 81 Mb */
-			71900, 0x8a, 0x00, 10,
-			8, 22, 39, 39, 39, 40080 },
+			71900, 10, 10, 8, 22, 39, 39, 39 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 108000, /* 108 Mb */
-			92500, 0x8b, 0x00, 11,
-			8,  23, 40, 40, 40, 53440 },
+			92500, 11, 11, 8, 23, 40, 40, 40 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 162000, /* 162 Mb */
-			130300, 0x8c, 0x00, 12,
-			8,  24, 41, 41, 41, 80160 },
+			130300, 12, 12, 8, 24, 41, 41, 41 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 216000, /* 216 Mb */
-			162800, 0x8d, 0x00, 13,
-			8,  25, 42, 42, 42, 106880 },
+			162800, 13, 13, 8, 25, 42, 42, 42 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 243000, /* 243 Mb */
-			178200, 0x8e, 0x00, 14,
-			8,  26, 43, 43, 43, 120240 },
+			178200, 14, 14, 8, 26, 43, 43, 43 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS, 270000, /* 270 Mb */
-			192100, 0x8f, 0x00, 15,
-			8,  27, 44, 45, 45, 133600 },
+			192100, 15, 15, 8, 27, 44, 45, 45 },
 		{ VALID_40, INVALID, WLAN_RC_PHY_HT_40_DS_HGI, 300000, /* 300 Mb */
-			207000, 0x8f, 0x00, 15,
-			8,  27, 44, 45, 45, 148400 },
-		},
+			207000, 15, 15, 8, 27, 44, 45, 45 },
+	},
 	50,  /* probe interval */
 	WLAN_RC_HT_FLAG,  /* Phy rates allowed initially */
 };
 
 static const struct ath_rate_table ar5416_11a_ratetable = {
 	8,
+	0,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
-			5400, 0x0b, 0x00, (0x80|12),
-			0, 0, 0 },
+			5400, 0, 12, 0, 0, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
-			7800, 0x0f, 0x00, 18,
-			0, 1, 0 },
+			7800,  1, 18, 0, 1, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
-			10000, 0x0a, 0x00, (0x80|24),
-			2, 2, 0 },
+			10000, 2, 24, 2, 2, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
-			13900, 0x0e, 0x00, 36,
-			2, 3, 0 },
+			13900, 3, 36, 2, 3, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
-			17300, 0x09, 0x00, (0x80|48),
-			4,  4, 0 },
+			17300, 4, 48, 4, 4, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
-			23000, 0x0d, 0x00, 72,
-			4,  5, 0 },
+			23000, 5, 72, 4, 5, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
-			27400, 0x08, 0x00, 96,
-			4,  6, 0 },
+			27400, 6, 96, 4, 6, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
-			29300, 0x0c, 0x00, 108,
-			4,  7, 0 },
+			29300, 7, 108, 4, 7, 0 },
 	},
 	50,  /* probe interval */
 	0,   /* Phy rates allowed initially */
@@ -334,48 +241,51 @@
 
 static const struct ath_rate_table ar5416_11g_ratetable = {
 	12,
+	0,
 	{
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 1000, /* 1 Mb */
-			900, 0x1b, 0x00, 2,
-			0, 0, 0 },
+			900, 0, 2, 0, 0, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 2000, /* 2 Mb */
-			1900, 0x1a, 0x04, 4,
-			1, 1, 0 },
+			1900, 1, 4, 1, 1, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 5500, /* 5.5 Mb */
-			4900, 0x19, 0x04, 11,
-			2, 2, 0 },
+			4900, 2, 11, 2, 2, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_CCK, 11000, /* 11 Mb */
-			8100, 0x18, 0x04, 22,
-			3, 3, 0 },
+			8100, 3, 22, 3, 3, 0 },
 		{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 6000, /* 6 Mb */
-			5400, 0x0b, 0x00, 12,
-			4, 4, 0 },
+			5400, 4, 12, 4, 4, 0 },
 		{ INVALID, INVALID, WLAN_RC_PHY_OFDM, 9000, /* 9 Mb */
-			7800, 0x0f, 0x00, 18,
-			4, 5, 0 },
+			7800, 5, 18, 4, 5, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 12000, /* 12 Mb */
-			10000, 0x0a, 0x00, 24,
-			6, 6, 0 },
+			10000, 6, 24, 6, 6, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 18000, /* 18 Mb */
-			13900, 0x0e, 0x00, 36,
-			6, 7, 0 },
+			13900, 7, 36, 6, 7, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 24000, /* 24 Mb */
-			17300, 0x09, 0x00, 48,
-			8,  8, 0 },
+			17300, 8, 48, 8, 8, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 36000, /* 36 Mb */
-			23000, 0x0d, 0x00, 72,
-			8,  9, 0 },
+			23000, 9, 72, 8, 9, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 48000, /* 48 Mb */
-			27400, 0x08, 0x00, 96,
-			8,  10, 0 },
+			27400, 10, 96, 8, 10, 0 },
 		{ VALID, VALID, WLAN_RC_PHY_OFDM, 54000, /* 54 Mb */
-			29300, 0x0c, 0x00, 108,
-			8,  11, 0 },
+			29300, 11, 108, 8, 11, 0 },
 	},
 	50,  /* probe interval */
 	0,   /* Phy rates allowed initially */
 };
 
+static const struct ath_rate_table *hw_rate_table[ATH9K_MODE_MAX] = {
+	[ATH9K_MODE_11A] = &ar5416_11a_ratetable,
+	[ATH9K_MODE_11G] = &ar5416_11g_ratetable,
+	[ATH9K_MODE_11NA_HT20] = &ar5416_11na_ratetable,
+	[ATH9K_MODE_11NG_HT20] = &ar5416_11ng_ratetable,
+	[ATH9K_MODE_11NA_HT40PLUS] = &ar5416_11na_ratetable,
+	[ATH9K_MODE_11NA_HT40MINUS] = &ar5416_11na_ratetable,
+	[ATH9K_MODE_11NG_HT40PLUS] = &ar5416_11ng_ratetable,
+	[ATH9K_MODE_11NG_HT40MINUS] = &ar5416_11ng_ratetable,
+};
+
+static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
+				struct ieee80211_tx_rate *rate);
+
 static inline int8_t median(int8_t a, int8_t b, int8_t c)
 {
 	if (a >= b) {
@@ -425,7 +335,7 @@
 static inline void ath_rc_set_valid_txmask(struct ath_rate_priv *ath_rc_priv,
 					   u8 index, int valid_tx_rate)
 {
-	ASSERT(index <= ath_rc_priv->rate_table_size);
+	BUG_ON(index > ath_rc_priv->rate_table_size);
 	ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? 1 : 0;
 }
 
@@ -534,7 +444,7 @@
 			 * capflag matches one of the validity
 			 * (VALID/VALID_20/VALID_40) flags */
 
-			if (((rate & 0x7F) == (dot11rate & 0x7F)) &&
+			if ((rate == dot11rate) &&
 			    ((valid & WLAN_RC_CAP_MODE(capflag)) ==
 			     WLAN_RC_CAP_MODE(capflag)) &&
 			    !WLAN_RC_PHY_HT(phy)) {
@@ -576,8 +486,7 @@
 			u8 rate = rateset->rs_rates[i];
 			u8 dot11rate = rate_table->info[j].dot11rate;
 
-			if (((rate & 0x7F) != (dot11rate & 0x7F)) ||
-			    !WLAN_RC_PHY_HT(phy) ||
+			if ((rate != dot11rate) || !WLAN_RC_PHY_HT(phy) ||
 			    !WLAN_RC_PHY_HT_VALID(valid, capflag))
 				continue;
 
@@ -696,18 +605,20 @@
 				   u8 tries, u8 rix, int rtsctsenable)
 {
 	rate->count = tries;
-	rate->idx = rix;
+	rate->idx = rate_table->info[rix].ratecode;
 
 	if (txrc->short_preamble)
 		rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
 	if (txrc->rts || rtsctsenable)
 		rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS;
-	if (WLAN_RC_PHY_40(rate_table->info[rix].phy))
-		rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
-	if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy))
-		rate->flags |= IEEE80211_TX_RC_SHORT_GI;
-	if (WLAN_RC_PHY_HT(rate_table->info[rix].phy))
+
+	if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) {
 		rate->flags |= IEEE80211_TX_RC_MCS;
+		if (WLAN_RC_PHY_40(rate_table->info[rix].phy))
+			rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+		if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy))
+			rate->flags |= IEEE80211_TX_RC_SHORT_GI;
+	}
 }
 
 static void ath_rc_rate_set_rtscts(struct ath_softc *sc,
@@ -720,7 +631,7 @@
 	/* get the cix for the lowest valid rix */
 	for (i = 3; i >= 0; i--) {
 		if (rates[i].count && (rates[i].idx >= 0)) {
-			rix = rates[i].idx;
+			rix = ath_rc_get_rateindex(rate_table, &rates[i]);
 			break;
 		}
 	}
@@ -859,12 +770,12 @@
 static bool ath_rc_update_per(struct ath_softc *sc,
 			      const struct ath_rate_table *rate_table,
 			      struct ath_rate_priv *ath_rc_priv,
-			      struct ath_tx_info_priv *tx_info_priv,
+				  struct ieee80211_tx_info *tx_info,
 			      int tx_rate, int xretries, int retries,
 			      u32 now_msec)
 {
 	bool state_change = false;
-	int count;
+	int count, n_bad_frames;
 	u8 last_per;
 	static u32 nretry_to_per_lookup[10] = {
 		100 * 0 / 1,
@@ -880,6 +791,7 @@
 	};
 
 	last_per = ath_rc_priv->per[tx_rate];
+	n_bad_frames = tx_info->status.ampdu_len - tx_info->status.ampdu_ack_len;
 
 	if (xretries) {
 		if (xretries == 1) {
@@ -907,7 +819,7 @@
 		if (retries >= count)
 			retries = count - 1;
 
-		if (tx_info_priv->n_bad_frames) {
+		if (n_bad_frames) {
 			/* new_PER = 7/8*old_PER + 1/8*(currentPER)
 			 * Assuming that n_frames is not 0.  The current PER
 			 * from the retries is 100 * retries / (retries+1),
@@ -920,14 +832,14 @@
 			 * the above PER.  The expression below is a
 			 * simplified version of the sum of these two terms.
 			 */
-			if (tx_info_priv->n_frames > 0) {
-				int n_frames, n_bad_frames;
+			if (tx_info->status.ampdu_len > 0) {
+				int n_frames, n_bad_tries;
 				u8 cur_per, new_per;
 
-				n_bad_frames = retries * tx_info_priv->n_frames +
-					tx_info_priv->n_bad_frames;
-				n_frames = tx_info_priv->n_frames * (retries + 1);
-				cur_per = (100 * n_bad_frames / n_frames) >> 3;
+				n_bad_tries = retries * tx_info->status.ampdu_len +
+					n_bad_frames;
+				n_frames = tx_info->status.ampdu_len * (retries + 1);
+				cur_per = (100 * n_bad_tries / n_frames) >> 3;
 				new_per = (u8)(last_per - (last_per >> 3) + cur_per);
 				ath_rc_priv->per[tx_rate] = new_per;
 			}
@@ -943,8 +855,7 @@
 		 * this was a probe.  Otherwise, ignore the probe.
 		 */
 		if (ath_rc_priv->probe_rate && ath_rc_priv->probe_rate == tx_rate) {
-			if (retries > 0 || 2 * tx_info_priv->n_bad_frames >
-				tx_info_priv->n_frames) {
+			if (retries > 0 || 2 * n_bad_frames > tx_info->status.ampdu_len) {
 				/*
 				 * Since we probed with just a single attempt,
 				 * any retries means the probe failed.  Also,
@@ -1003,7 +914,7 @@
 
 static void ath_rc_update_ht(struct ath_softc *sc,
 			     struct ath_rate_priv *ath_rc_priv,
-			     struct ath_tx_info_priv *tx_info_priv,
+			     struct ieee80211_tx_info *tx_info,
 			     int tx_rate, int xretries, int retries)
 {
 	u32 now_msec = jiffies_to_msecs(jiffies);
@@ -1020,7 +931,7 @@
 
 	/* Update PER first */
 	state_change = ath_rc_update_per(sc, rate_table, ath_rc_priv,
-					 tx_info_priv, tx_rate, xretries,
+					 tx_info, tx_rate, xretries,
 					 retries, now_msec);
 
 	/*
@@ -1080,15 +991,19 @@
 {
 	int rix;
 
+	if (!(rate->flags & IEEE80211_TX_RC_MCS))
+		return rate->idx;
+
+	rix = rate->idx + rate_table->mcs_start;
 	if ((rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) &&
 	    (rate->flags & IEEE80211_TX_RC_SHORT_GI))
-		rix = rate_table->info[rate->idx].ht_index;
+		rix = rate_table->info[rix].ht_index;
 	else if (rate->flags & IEEE80211_TX_RC_SHORT_GI)
-		rix = rate_table->info[rate->idx].sgi_index;
+		rix = rate_table->info[rix].sgi_index;
 	else if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
-		rix = rate_table->info[rate->idx].cw40index;
+		rix = rate_table->info[rix].cw40index;
 	else
-		rix = rate_table->info[rate->idx].base_index;
+		rix = rate_table->info[rix].base_index;
 
 	return rix;
 }
@@ -1098,7 +1013,6 @@
 			     struct ieee80211_tx_info *tx_info,
 			     int final_ts_idx, int xretries, int long_retry)
 {
-	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
 	const struct ath_rate_table *rate_table;
 	struct ieee80211_tx_rate *rates = tx_info->status.rates;
 	u8 flags;
@@ -1124,9 +1038,8 @@
 					return;
 
 				rix = ath_rc_get_rateindex(rate_table, &rates[i]);
-				ath_rc_update_ht(sc, ath_rc_priv,
-						tx_info_priv, rix,
-						xretries ? 1 : 2,
+				ath_rc_update_ht(sc, ath_rc_priv, tx_info,
+						rix, xretries ? 1 : 2,
 						rates[i].count);
 			}
 		}
@@ -1149,8 +1062,7 @@
 		return;
 
 	rix = ath_rc_get_rateindex(rate_table, &rates[i]);
-	ath_rc_update_ht(sc, ath_rc_priv, tx_info_priv, rix,
-			 xretries, long_retry);
+	ath_rc_update_ht(sc, ath_rc_priv, tx_info, rix, xretries, long_retry);
 }
 
 static const
@@ -1160,6 +1072,7 @@
 					     bool is_cw_40)
 {
 	int mode = 0;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	switch(band) {
 	case IEEE80211_BAND_2GHZ:
@@ -1177,14 +1090,17 @@
 			mode = ATH9K_MODE_11NA_HT40PLUS;
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_CONFIG, "Invalid band\n");
+		ath_print(common, ATH_DBG_CONFIG, "Invalid band\n");
 		return NULL;
 	}
 
 	BUG_ON(mode >= ATH9K_MODE_MAX);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Choosing rate table for mode: %d\n", mode);
-	return sc->hw_rate_table[mode];
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Choosing rate table for mode: %d\n", mode);
+
+	sc->cur_rate_mode = mode;
+	return hw_rate_table[mode];
 }
 
 static void ath_rc_init(struct ath_softc *sc,
@@ -1194,14 +1110,10 @@
 			const struct ath_rate_table *rate_table)
 {
 	struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
 	u8 i, j, k, hi = 0, hthi = 0;
 
-	if (!rate_table) {
-		DPRINTF(sc, ATH_DBG_FATAL, "Rate table not initialized\n");
-		return;
-	}
-
 	/* Initial rate table size. Will change depending
 	 * on the working rate set */
 	ath_rc_priv->rate_table_size = RATE_TABLE_SIZE;
@@ -1239,7 +1151,7 @@
 
 	ath_rc_priv->rate_table_size = hi + 1;
 	ath_rc_priv->rate_max_phy = 0;
-	ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE);
+	BUG_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE);
 
 	for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) {
 		for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) {
@@ -1253,16 +1165,17 @@
 
 		ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1];
 	}
-	ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE);
-	ASSERT(k <= RATE_TABLE_SIZE);
+	BUG_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE);
+	BUG_ON(k > RATE_TABLE_SIZE);
 
 	ath_rc_priv->max_valid_rate = k;
 	ath_rc_sort_validrates(rate_table, ath_rc_priv);
 	ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
 	sc->cur_rate_table = rate_table;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "RC Initialized with capabilities: 0x%x\n",
-		ath_rc_priv->ht_cap);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "RC Initialized with capabilities: 0x%x\n",
+		  ath_rc_priv->ht_cap);
 }
 
 static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta,
@@ -1296,44 +1209,52 @@
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	struct ath_tx_info_priv *tx_info_priv = NULL;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr;
-	int final_ts_idx, tx_status = 0, is_underrun = 0;
+	int final_ts_idx = 0, tx_status = 0, is_underrun = 0;
+	int long_retry = 0;
 	__le16 fc;
+	int i;
 
 	hdr = (struct ieee80211_hdr *)skb->data;
 	fc = hdr->frame_control;
-	tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	final_ts_idx = tx_info_priv->tx.ts_rateindex;
+	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+		struct ieee80211_tx_rate *rate = &tx_info->status.rates[i];
+		if (!rate->count)
+			break;
+
+		final_ts_idx = i;
+		long_retry = rate->count - 1;
+	}
 
 	if (!priv_sta || !ieee80211_is_data(fc) ||
-	    !tx_info_priv->update_rc)
-		goto exit;
+	    !(tx_info->pad[0] & ATH_TX_INFO_UPDATE_RC))
+		return;
 
-	if (tx_info_priv->tx.ts_status & ATH9K_TXERR_FILT)
-		goto exit;
+	if (tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED)
+		return;
 
 	/*
-	 * If underrun error is seen assume it as an excessive retry only
-	 * if prefetch trigger level have reached the max (0x3f for 5416)
-	 * Adjust the long retry as if the frame was tried hw->max_rate_tries
-	 * times. This affects how ratectrl updates PER for the failed rate.
+	 * If an underrun error is seen assume it as an excessive retry only
+	 * if max frame trigger level has been reached (2 KB for singel stream,
+	 * and 4 KB for dual stream). Adjust the long retry as if the frame was
+	 * tried hw->max_rate_tries times to affect how ratectrl updates PER for
+	 * the failed rate. In case of congestion on the bus penalizing these
+	 * type of underruns should help hardware actually transmit new frames
+	 * successfully by eventually preferring slower rates. This itself
+	 * should also alleviate congestion on the bus.
 	 */
-	if (tx_info_priv->tx.ts_flags &
-	    (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN) &&
-	    ((sc->sc_ah->tx_trig_level) >= ath_rc_priv->tx_triglevel_max)) {
+	if ((tx_info->pad[0] & ATH_TX_INFO_UNDERRUN) &&
+	    (sc->sc_ah->tx_trig_level >= ath_rc_priv->tx_triglevel_max)) {
 		tx_status = 1;
 		is_underrun = 1;
 	}
 
-	if ((tx_info_priv->tx.ts_status & ATH9K_TXERR_XRETRY) ||
-	    (tx_info_priv->tx.ts_status & ATH9K_TXERR_FIFO))
+	if (tx_info->pad[0] & ATH_TX_INFO_XRETRY)
 		tx_status = 1;
 
 	ath_rc_tx_status(sc, ath_rc_priv, tx_info, final_ts_idx, tx_status,
-			 (is_underrun) ? sc->hw->max_rate_tries :
-			 tx_info_priv->tx.ts_longretry);
+			 (is_underrun) ? sc->hw->max_rate_tries : long_retry);
 
 	/* Check if aggregation has to be enabled for this tid */
 	if (conf_is_ht(&sc->hw->conf) &&
@@ -1347,13 +1268,12 @@
 			an = (struct ath_node *)sta->drv_priv;
 
 			if(ath_tx_aggr_check(sc, an, tid))
-				ieee80211_start_tx_ba_session(sc->hw, hdr->addr1, tid);
+				ieee80211_start_tx_ba_session(sta, tid);
 		}
 	}
 
-	ath_debug_stat_rc(sc, skb);
-exit:
-	kfree(tx_info_priv);
+	ath_debug_stat_rc(sc, ath_rc_get_rateindex(sc->cur_rate_table,
+		&tx_info->status.rates[final_ts_idx]));
 }
 
 static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
@@ -1361,7 +1281,7 @@
 {
 	struct ath_softc *sc = priv;
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
-	const struct ath_rate_table *rate_table = NULL;
+	const struct ath_rate_table *rate_table;
 	bool is_cw40, is_sgi40;
 	int i, j = 0;
 
@@ -1393,11 +1313,9 @@
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) {
 		rate_table = ath_choose_rate_table(sc, sband->band,
-						   sta->ht_cap.ht_supported,
-						   is_cw40);
-	} else if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
-		/* cur_rate_table would be set on init through config() */
-		rate_table = sc->cur_rate_table;
+		                      sta->ht_cap.ht_supported, is_cw40);
+	} else {
+		rate_table = hw_rate_table[sc->cur_rate_mode];
 	}
 
 	ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, is_cw40, is_sgi40);
@@ -1438,9 +1356,10 @@
 						   oper_cw40, oper_sgi40);
 			ath_rc_init(sc, priv_sta, sband, sta, rate_table);
 
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"Operating HT Bandwidth changed to: %d\n",
-				sc->hw->conf.channel_type);
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+				  "Operating HT Bandwidth changed to: %d\n",
+				  sc->hw->conf.channel_type);
+			sc->cur_rate_table = hw_rate_table[sc->cur_rate_mode];
 		}
 	}
 }
@@ -1463,8 +1382,8 @@
 
 	rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp);
 	if (!rate_priv) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to allocate private rc structure\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unable to allocate private rc structure\n");
 		return NULL;
 	}
 
@@ -1493,26 +1412,6 @@
 	.free_sta = ath_rate_free_sta,
 };
 
-void ath_rate_attach(struct ath_softc *sc)
-{
-	sc->hw_rate_table[ATH9K_MODE_11A] =
-		&ar5416_11a_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11G] =
-		&ar5416_11g_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11NA_HT20] =
-		&ar5416_11na_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11NG_HT20] =
-		&ar5416_11ng_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11NA_HT40PLUS] =
-		&ar5416_11na_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11NA_HT40MINUS] =
-		&ar5416_11na_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11NG_HT40PLUS] =
-		&ar5416_11ng_ratetable;
-	sc->hw_rate_table[ATH9K_MODE_11NG_HT40MINUS] =
-		&ar5416_11ng_ratetable;
-}
-
 int ath_rate_control_register(void)
 {
 	return ieee80211_rate_control_register(&ath_rate_ops);
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index fa21a62..9eb96f5 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -19,6 +19,8 @@
 #ifndef RC_H
 #define RC_H
 
+#include "hw.h"
+
 struct ath_softc;
 
 #define ATH_RATE_MAX     30
@@ -102,6 +104,7 @@
  */
 struct ath_rate_table {
 	int rate_cnt;
+	int mcs_start;
 	struct {
 		int valid;
 		int valid_single_stream;
@@ -109,14 +112,12 @@
 		u32 ratekbps;
 		u32 user_ratekbps;
 		u8 ratecode;
-		u8 short_preamble;
 		u8 dot11rate;
 		u8 ctrl_rate;
 		u8 base_index;
 		u8 cw40index;
 		u8 sgi_index;
 		u8 ht_index;
-		u32 max_4ms_framelen;
 	} info[RATE_TABLE_SIZE];
 	u32 probe_interval;
 	u8 initial_ratemax;
@@ -165,26 +166,18 @@
 	struct ath_rate_softc *asc;
 };
 
+#define ATH_TX_INFO_FRAME_TYPE_INTERNAL	(1 << 0)
+#define ATH_TX_INFO_FRAME_TYPE_PAUSE	(1 << 1)
+#define ATH_TX_INFO_UPDATE_RC		(1 << 2)
+#define ATH_TX_INFO_XRETRY		(1 << 3)
+#define ATH_TX_INFO_UNDERRUN		(1 << 4)
+
 enum ath9k_internal_frame_type {
 	ATH9K_NOT_INTERNAL,
 	ATH9K_INT_PAUSE,
 	ATH9K_INT_UNPAUSE
 };
 
-struct ath_tx_info_priv {
-	struct ath_wiphy *aphy;
-	struct ath_tx_status tx;
-	int n_frames;
-	int n_bad_frames;
-	bool update_rc;
-	enum ath9k_internal_frame_type frame_type;
-};
-
-#define ATH_TX_INFO_PRIV(tx_info) \
-	((struct ath_tx_info_priv *)((tx_info)->rate_driver_data[0]))
-
-void ath_rate_attach(struct ath_softc *sc);
-u8 ath_rate_findrateix(struct ath_softc *sc, u8 dot11_rate);
 int ath_rate_control_register(void);
 void ath_rate_control_unregister(void);
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ec0abf8..477365e 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -48,6 +48,7 @@
 static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_desc *ds;
 	struct sk_buff *skb;
 
@@ -59,14 +60,16 @@
 
 	/* virtual addr of the beginning of the buffer. */
 	skb = bf->bf_mpdu;
-	ASSERT(skb != NULL);
+	BUG_ON(skb == NULL);
 	ds->ds_vdata = skb->data;
 
-	/* setup rx descriptors. The rx.bufsize here tells the harware
+	/*
+	 * setup rx descriptors. The rx_bufsize here tells the hardware
 	 * how much data it can DMA to us and that we are prepared
-	 * to process */
+	 * to process
+	 */
 	ath9k_hw_setuprxdesc(ah, ds,
-			     sc->rx.bufsize,
+			     common->rx_bufsize,
 			     0);
 
 	if (sc->rx.rxlink == NULL)
@@ -86,192 +89,11 @@
 	sc->rx.rxotherant = 0;
 }
 
-/*
- *  Extend 15-bit time stamp from rx descriptor to
- *  a full 64-bit TSF using the current h/w TSF.
-*/
-static u64 ath_extend_tsf(struct ath_softc *sc, u32 rstamp)
-{
-	u64 tsf;
-
-	tsf = ath9k_hw_gettsf64(sc->sc_ah);
-	if ((tsf & 0x7fff) < rstamp)
-		tsf -= 0x8000;
-	return (tsf & ~0x7fff) | rstamp;
-}
-
-/*
- * For Decrypt or Demic errors, we only mark packet status here and always push
- * up the frame up to let mac80211 handle the actual error case, be it no
- * decryption key or real decryption error. This let us keep statistics there.
- */
-static int ath_rx_prepare(struct sk_buff *skb, struct ath_desc *ds,
-			  struct ieee80211_rx_status *rx_status, bool *decrypt_error,
-			  struct ath_softc *sc)
-{
-	struct ieee80211_hdr *hdr;
-	u8 ratecode;
-	__le16 fc;
-	struct ieee80211_hw *hw;
-	struct ieee80211_sta *sta;
-	struct ath_node *an;
-	int last_rssi = ATH_RSSI_DUMMY_MARKER;
-
-
-	hdr = (struct ieee80211_hdr *)skb->data;
-	fc = hdr->frame_control;
-	memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
-	hw = ath_get_virt_hw(sc, hdr);
-
-	if (ds->ds_rxstat.rs_more) {
-		/*
-		 * Frame spans multiple descriptors; this cannot happen yet
-		 * as we don't support jumbograms. If not in monitor mode,
-		 * discard the frame. Enable this if you want to see
-		 * error frames in Monitor mode.
-		 */
-		if (sc->sc_ah->opmode != NL80211_IFTYPE_MONITOR)
-			goto rx_next;
-	} else if (ds->ds_rxstat.rs_status != 0) {
-		if (ds->ds_rxstat.rs_status & ATH9K_RXERR_CRC)
-			rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
-		if (ds->ds_rxstat.rs_status & ATH9K_RXERR_PHY)
-			goto rx_next;
-
-		if (ds->ds_rxstat.rs_status & ATH9K_RXERR_DECRYPT) {
-			*decrypt_error = true;
-		} else if (ds->ds_rxstat.rs_status & ATH9K_RXERR_MIC) {
-			if (ieee80211_is_ctl(fc))
-				/*
-				 * Sometimes, we get invalid
-				 * MIC failures on valid control frames.
-				 * Remove these mic errors.
-				 */
-				ds->ds_rxstat.rs_status &= ~ATH9K_RXERR_MIC;
-			else
-				rx_status->flag |= RX_FLAG_MMIC_ERROR;
-		}
-		/*
-		 * Reject error frames with the exception of
-		 * decryption and MIC failures. For monitor mode,
-		 * we also ignore the CRC error.
-		 */
-		if (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR) {
-			if (ds->ds_rxstat.rs_status &
-			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
-			      ATH9K_RXERR_CRC))
-				goto rx_next;
-		} else {
-			if (ds->ds_rxstat.rs_status &
-			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC)) {
-				goto rx_next;
-			}
-		}
-	}
-
-	ratecode = ds->ds_rxstat.rs_rate;
-
-	if (ratecode & 0x80) {
-		/* HT rate */
-		rx_status->flag |= RX_FLAG_HT;
-		if (ds->ds_rxstat.rs_flags & ATH9K_RX_2040)
-			rx_status->flag |= RX_FLAG_40MHZ;
-		if (ds->ds_rxstat.rs_flags & ATH9K_RX_GI)
-			rx_status->flag |= RX_FLAG_SHORT_GI;
-		rx_status->rate_idx = ratecode & 0x7f;
-	} else {
-		int i = 0, cur_band, n_rates;
-
-		cur_band = hw->conf.channel->band;
-		n_rates = sc->sbands[cur_band].n_bitrates;
-
-		for (i = 0; i < n_rates; i++) {
-			if (sc->sbands[cur_band].bitrates[i].hw_value ==
-			    ratecode) {
-				rx_status->rate_idx = i;
-				break;
-			}
-
-			if (sc->sbands[cur_band].bitrates[i].hw_value_short ==
-			    ratecode) {
-				rx_status->rate_idx = i;
-				rx_status->flag |= RX_FLAG_SHORTPRE;
-				break;
-			}
-		}
-	}
-
-	rcu_read_lock();
-	sta = ieee80211_find_sta(sc->hw, hdr->addr2);
-	if (sta) {
-		an = (struct ath_node *) sta->drv_priv;
-		if (ds->ds_rxstat.rs_rssi != ATH9K_RSSI_BAD &&
-		   !ds->ds_rxstat.rs_moreaggr)
-			ATH_RSSI_LPF(an->last_rssi, ds->ds_rxstat.rs_rssi);
-		last_rssi = an->last_rssi;
-	}
-	rcu_read_unlock();
-
-	if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
-		ds->ds_rxstat.rs_rssi = ATH_EP_RND(last_rssi,
-					ATH_RSSI_EP_MULTIPLIER);
-	if (ds->ds_rxstat.rs_rssi < 0)
-		ds->ds_rxstat.rs_rssi = 0;
-	else if (ds->ds_rxstat.rs_rssi > 127)
-		ds->ds_rxstat.rs_rssi = 127;
-
-	/* Update Beacon RSSI, this is used by ANI. */
-	if (ieee80211_is_beacon(fc))
-		sc->sc_ah->stats.avgbrssi = ds->ds_rxstat.rs_rssi;
-
-	rx_status->mactime = ath_extend_tsf(sc, ds->ds_rxstat.rs_tstamp);
-	rx_status->band = hw->conf.channel->band;
-	rx_status->freq = hw->conf.channel->center_freq;
-	rx_status->noise = sc->ani.noise_floor;
-	rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + ds->ds_rxstat.rs_rssi;
-	rx_status->antenna = ds->ds_rxstat.rs_antenna;
-
-	/*
-	 * Theory for reporting quality:
-	 *
-	 * At a hardware RSSI of 45 you will be able to use MCS 7  reliably.
-	 * At a hardware RSSI of 45 you will be able to use MCS 15 reliably.
-	 * At a hardware RSSI of 35 you should be able use 54 Mbps reliably.
-	 *
-	 * MCS 7  is the highets MCS index usable by a 1-stream device.
-	 * MCS 15 is the highest MCS index usable by a 2-stream device.
-	 *
-	 * All ath9k devices are either 1-stream or 2-stream.
-	 *
-	 * How many bars you see is derived from the qual reporting.
-	 *
-	 * A more elaborate scheme can be used here but it requires tables
-	 * of SNR/throughput for each possible mode used. For the MCS table
-	 * you can refer to the wireless wiki:
-	 *
-	 * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
-	 *
-	 */
-	if (conf_is_ht(&hw->conf))
-		rx_status->qual =  ds->ds_rxstat.rs_rssi * 100 / 45;
-	else
-		rx_status->qual =  ds->ds_rxstat.rs_rssi * 100 / 35;
-
-	/* rssi can be more than 45 though, anything above that
-	 * should be considered at 100% */
-	if (rx_status->qual > 100)
-		rx_status->qual = 100;
-
-	rx_status->flag |= RX_FLAG_TSFT;
-
-	return 1;
-rx_next:
-	return 0;
-}
-
 static void ath_opmode_init(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	u32 rfilt, mfilt[2];
 
 	/* configure rx filter */
@@ -280,13 +102,13 @@
 
 	/* configure bssid mask */
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
-		ath9k_hw_setbssidmask(sc);
+		ath_hw_setbssidmask(common);
 
 	/* configure operational mode */
 	ath9k_hw_setopmode(ah);
 
 	/* Handle any link-level address change. */
-	ath9k_hw_setmac(ah, sc->sc_ah->macaddr);
+	ath9k_hw_setmac(ah, common->macaddr);
 
 	/* calculate and install multicast filter */
 	mfilt[0] = mfilt[1] = ~0;
@@ -295,6 +117,7 @@
 
 int ath_rx_init(struct ath_softc *sc, int nbufs)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct sk_buff *skb;
 	struct ath_buf *bf;
 	int error = 0;
@@ -303,24 +126,24 @@
 	sc->sc_flags &= ~SC_OP_RXFLUSH;
 	spin_lock_init(&sc->rx.rxbuflock);
 
-	sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
-				 min(sc->common.cachelsz, (u16)64));
+	common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
+				     min(common->cachelsz, (u16)64));
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
-		sc->common.cachelsz, sc->rx.bufsize);
+	ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+		  common->cachelsz, common->rx_bufsize);
 
 	/* Initialize rx descriptors */
 
 	error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
 				  "rx", nbufs, 1);
 	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"failed to allocate rx descriptors: %d\n", error);
+		ath_print(common, ATH_DBG_FATAL,
+			  "failed to allocate rx descriptors: %d\n", error);
 		goto err;
 	}
 
 	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
-		skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_KERNEL);
+		skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL);
 		if (skb == NULL) {
 			error = -ENOMEM;
 			goto err;
@@ -328,14 +151,14 @@
 
 		bf->bf_mpdu = skb;
 		bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
-						 sc->rx.bufsize,
+						 common->rx_bufsize,
 						 DMA_FROM_DEVICE);
 		if (unlikely(dma_mapping_error(sc->dev,
 					       bf->bf_buf_addr))) {
 			dev_kfree_skb_any(skb);
 			bf->bf_mpdu = NULL;
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"dma_mapping_error() on RX init\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "dma_mapping_error() on RX init\n");
 			error = -ENOMEM;
 			goto err;
 		}
@@ -352,6 +175,8 @@
 
 void ath_rx_cleanup(struct ath_softc *sc)
 {
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct sk_buff *skb;
 	struct ath_buf *bf;
 
@@ -359,7 +184,7 @@
 		skb = bf->bf_mpdu;
 		if (skb) {
 			dma_unmap_single(sc->dev, bf->bf_buf_addr,
-					 sc->rx.bufsize, DMA_FROM_DEVICE);
+					 common->rx_bufsize, DMA_FROM_DEVICE);
 			dev_kfree_skb(skb);
 		}
 	}
@@ -420,7 +245,10 @@
 	else
 		rfilt |= ATH9K_RX_FILTER_BEACON;
 
-	if (sc->rx.rxfilter & FIF_PSPOLL)
+	if ((AR_SREV_9280_10_OR_LATER(sc->sc_ah) ||
+	    AR_SREV_9285_10_OR_LATER(sc->sc_ah)) &&
+	    (sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
+	    (sc->rx.rxfilter & FIF_PSPOLL))
 		rfilt |= ATH9K_RX_FILTER_PSPOLL;
 
 	if (conf_is_ht(&sc->hw->conf))
@@ -527,20 +355,22 @@
 static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ieee80211_mgmt *mgmt;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	if (skb->len < 24 + 8 + 2 + 2)
 		return;
 
 	mgmt = (struct ieee80211_mgmt *)skb->data;
-	if (memcmp(sc->curbssid, mgmt->bssid, ETH_ALEN) != 0)
+	if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0)
 		return; /* not from our current AP */
 
 	sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
 
 	if (sc->sc_flags & SC_OP_BEACON_SYNC) {
 		sc->sc_flags &= ~SC_OP_BEACON_SYNC;
-		DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on "
-			"timestamp from the AP\n");
+		ath_print(common, ATH_DBG_PS,
+			  "Reconfigure Beacon timers based on "
+			  "timestamp from the AP\n");
 		ath_beacon_config(sc, NULL);
 	}
 
@@ -552,8 +382,8 @@
 		 * a backup trigger for returning into NETWORK SLEEP state,
 		 * so we are waiting for it as well.
 		 */
-		DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
-			"buffered broadcast/multicast frame(s)\n");
+		ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
+			  "buffered broadcast/multicast frame(s)\n");
 		sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
 		return;
 	}
@@ -565,13 +395,15 @@
 		 * been delivered.
 		 */
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
-		DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
+		ath_print(common, ATH_DBG_PS,
+			  "PS wait for CAB frames timed out\n");
 	}
 }
 
 static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	hdr = (struct ieee80211_hdr *)skb->data;
 
@@ -589,14 +421,15 @@
 		 * point.
 		 */
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
-		DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
-			"sleep\n");
+		ath_print(common, ATH_DBG_PS,
+			  "All PS CAB frames received, back to sleep\n");
 	} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
 		   !is_multicast_ether_addr(hdr->addr1) &&
 		   !ieee80211_has_morefrags(hdr->frame_control)) {
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
-		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
-			"received PS-Poll data (0x%x)\n",
+		ath_print(common, ATH_DBG_PS,
+			  "Going back to sleep after having received "
+			  "PS-Poll data (0x%x)\n",
 			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
 					SC_OP_WAIT_FOR_CAB |
 					SC_OP_WAIT_FOR_PSPOLL_DATA |
@@ -604,8 +437,9 @@
 	}
 }
 
-static void ath_rx_send_to_mac80211(struct ath_softc *sc, struct sk_buff *skb,
-				    struct ieee80211_rx_status *rx_status)
+static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw,
+				    struct ath_softc *sc, struct sk_buff *skb,
+				    struct ieee80211_rx_status *rxs)
 {
 	struct ieee80211_hdr *hdr;
 
@@ -625,19 +459,14 @@
 			if (aphy == NULL)
 				continue;
 			nskb = skb_copy(skb, GFP_ATOMIC);
-			if (nskb) {
-				memcpy(IEEE80211_SKB_RXCB(nskb), rx_status,
-					sizeof(*rx_status));
-				ieee80211_rx(aphy->hw, nskb);
-			}
+			if (!nskb)
+				continue;
+			ieee80211_rx(aphy->hw, nskb);
 		}
-		memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
 		ieee80211_rx(sc->hw, skb);
-	} else {
+	} else
 		/* Deliver unicast frames based on receiver address */
-		memcpy(IEEE80211_SKB_RXCB(skb), rx_status, sizeof(*rx_status));
-		ieee80211_rx(ath_get_virt_hw(sc, hdr), skb);
-	}
+		ieee80211_rx(hw, skb);
 }
 
 int ath_rx_tasklet(struct ath_softc *sc, int flush)
@@ -648,14 +477,20 @@
 
 	struct ath_buf *bf;
 	struct ath_desc *ds;
+	struct ath_rx_status *rx_stats;
 	struct sk_buff *skb = NULL, *requeue_skb;
-	struct ieee80211_rx_status rx_status;
+	struct ieee80211_rx_status *rxs;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	/*
+	 * The hw can techncically differ from common->hw when using ath9k
+	 * virtual wiphy so to account for that we iterate over the active
+	 * wiphys and find the appropriate wiphy and therefore hw.
+	 */
+	struct ieee80211_hw *hw = NULL;
 	struct ieee80211_hdr *hdr;
-	int hdrlen, padsize, retval;
+	int retval;
 	bool decrypt_error = false;
-	u8 keyix;
-	__le16 fc;
 
 	spin_lock_bh(&sc->rx.rxbuflock);
 
@@ -727,9 +562,15 @@
 		 * 2. requeueing the same buffer to h/w
 		 */
 		dma_sync_single_for_cpu(sc->dev, bf->bf_buf_addr,
-				sc->rx.bufsize,
+				common->rx_bufsize,
 				DMA_FROM_DEVICE);
 
+		hdr = (struct ieee80211_hdr *) skb->data;
+		rxs =  IEEE80211_SKB_RXCB(skb);
+
+		hw = ath_get_virt_hw(sc, hdr);
+		rx_stats = &ds->ds_rxstat;
+
 		/*
 		 * If we're asked to flush receive queue, directly
 		 * chain it back at the queue without processing it.
@@ -737,19 +578,14 @@
 		if (flush)
 			goto requeue;
 
-		if (!ds->ds_rxstat.rs_datalen)
-			goto requeue;
-
-		/* The status portion of the descriptor could get corrupted. */
-		if (sc->rx.bufsize < ds->ds_rxstat.rs_datalen)
-			goto requeue;
-
-		if (!ath_rx_prepare(skb, ds, &rx_status, &decrypt_error, sc))
+		retval = ath9k_cmn_rx_skb_preprocess(common, hw, skb, rx_stats,
+						     rxs, &decrypt_error);
+		if (retval)
 			goto requeue;
 
 		/* Ensure we always have an skb to requeue once we are done
 		 * processing the current buffer's skb */
-		requeue_skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_ATOMIC);
+		requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC);
 
 		/* If there is no memory we ignore the current RX'd frame,
 		 * tell hardware it can give us a new frame using the old
@@ -760,60 +596,26 @@
 
 		/* Unmap the frame */
 		dma_unmap_single(sc->dev, bf->bf_buf_addr,
-				 sc->rx.bufsize,
+				 common->rx_bufsize,
 				 DMA_FROM_DEVICE);
 
-		skb_put(skb, ds->ds_rxstat.rs_datalen);
+		skb_put(skb, rx_stats->rs_datalen);
 
-		/* see if any padding is done by the hw and remove it */
-		hdr = (struct ieee80211_hdr *)skb->data;
-		hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-		fc = hdr->frame_control;
-
-		/* The MAC header is padded to have 32-bit boundary if the
-		 * packet payload is non-zero. The general calculation for
-		 * padsize would take into account odd header lengths:
-		 * padsize = (4 - hdrlen % 4) % 4; However, since only
-		 * even-length headers are used, padding can only be 0 or 2
-		 * bytes and we can optimize this a bit. In addition, we must
-		 * not try to remove padding from short control frames that do
-		 * not have payload. */
-		padsize = hdrlen & 3;
-		if (padsize && hdrlen >= 24) {
-			memmove(skb->data + padsize, skb->data, hdrlen);
-			skb_pull(skb, padsize);
-		}
-
-		keyix = ds->ds_rxstat.rs_keyix;
-
-		if (!(keyix == ATH9K_RXKEYIX_INVALID) && !decrypt_error) {
-			rx_status.flag |= RX_FLAG_DECRYPTED;
-		} else if (ieee80211_has_protected(fc)
-			   && !decrypt_error && skb->len >= hdrlen + 4) {
-			keyix = skb->data[hdrlen + 3] >> 6;
-
-			if (test_bit(keyix, sc->keymap))
-				rx_status.flag |= RX_FLAG_DECRYPTED;
-		}
-		if (ah->sw_mgmt_crypto &&
-		    (rx_status.flag & RX_FLAG_DECRYPTED) &&
-		    ieee80211_is_mgmt(fc)) {
-			/* Use software decrypt for management frames. */
-			rx_status.flag &= ~RX_FLAG_DECRYPTED;
-		}
+		ath9k_cmn_rx_skb_postprocess(common, skb, rx_stats,
+					     rxs, decrypt_error);
 
 		/* We will now give hardware our shiny new allocated skb */
 		bf->bf_mpdu = requeue_skb;
 		bf->bf_buf_addr = dma_map_single(sc->dev, requeue_skb->data,
-					 sc->rx.bufsize,
-					 DMA_FROM_DEVICE);
+						 common->rx_bufsize,
+						 DMA_FROM_DEVICE);
 		if (unlikely(dma_mapping_error(sc->dev,
 			  bf->bf_buf_addr))) {
 			dev_kfree_skb_any(requeue_skb);
 			bf->bf_mpdu = NULL;
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"dma_mapping_error() on RX\n");
-			ath_rx_send_to_mac80211(sc, skb, &rx_status);
+			ath_print(common, ATH_DBG_FATAL,
+				  "dma_mapping_error() on RX\n");
+			ath_rx_send_to_mac80211(hw, sc, skb, rxs);
 			break;
 		}
 		bf->bf_dmacontext = bf->bf_buf_addr;
@@ -824,7 +626,7 @@
 		 */
 		if (sc->rx.defant != ds->ds_rxstat.rs_antenna) {
 			if (++sc->rx.rxotherant >= 3)
-				ath_setdefantenna(sc, ds->ds_rxstat.rs_antenna);
+				ath_setdefantenna(sc, rx_stats->rs_antenna);
 		} else {
 			sc->rx.rxotherant = 0;
 		}
@@ -834,7 +636,7 @@
 					     SC_OP_WAIT_FOR_PSPOLL_DATA)))
 			ath_rx_ps(sc, skb);
 
-		ath_rx_send_to_mac80211(sc, skb, &rx_status);
+		ath_rx_send_to_mac80211(hw, sc, skb, rxs);
 
 requeue:
 		list_move_tail(&bf->list, &sc->rx.rxbuf);
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index d83b77f8..8e653fb 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -17,6 +17,8 @@
 #ifndef REG_H
 #define REG_H
 
+#include "../reg.h"
+
 #define AR_CR                0x0008
 #define AR_CR_RXE            0x00000004
 #define AR_CR_RXD            0x00000020
@@ -969,10 +971,10 @@
 #define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_S         4
 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF        0x00000080
 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_DEF_S      7
+#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB      0x00000400
+#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB_S    10
 #define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB        0x00001000
 #define AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB_S      12
-#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB      0x00001000
-#define AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB_S    1
 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB         0x00008000
 #define AR_GPIO_INPUT_EN_VAL_RFSILENT_BB_S       15
 #define AR_GPIO_RTC_RESET_OVERRIDE_ENABLE        0x00010000
@@ -1330,13 +1332,22 @@
 #define AR_MCAST_FIL0       0x8040
 #define AR_MCAST_FIL1       0x8044
 
+/*
+ * AR_DIAG_SW - Register which can be used for diagnostics and testing purposes.
+ *
+ * The force RX abort (AR_DIAG_RX_ABORT, bit 25) can be used in conjunction with
+ * RX block (AR_DIAG_RX_DIS, bit 5) to help fast channel change to shut down
+ * receive. The force RX abort bit will kill any frame which is currently being
+ * transferred between the MAC and baseband. The RX block bit (AR_DIAG_RX_DIS)
+ * will prevent any new frames from getting started.
+ */
 #define AR_DIAG_SW                  0x8048
 #define AR_DIAG_CACHE_ACK           0x00000001
 #define AR_DIAG_ACK_DIS             0x00000002
 #define AR_DIAG_CTS_DIS             0x00000004
 #define AR_DIAG_ENCRYPT_DIS         0x00000008
 #define AR_DIAG_DECRYPT_DIS         0x00000010
-#define AR_DIAG_RX_DIS              0x00000020
+#define AR_DIAG_RX_DIS              0x00000020 /* RX block */
 #define AR_DIAG_LOOP_BACK           0x00000040
 #define AR_DIAG_CORR_FCS            0x00000080
 #define AR_DIAG_CHAN_INFO           0x00000100
@@ -1345,12 +1356,12 @@
 #define AR_DIAG_FRAME_NV0           0x00020000
 #define AR_DIAG_OBS_PT_SEL1         0x000C0000
 #define AR_DIAG_OBS_PT_SEL1_S       18
-#define AR_DIAG_FORCE_RX_CLEAR      0x00100000
+#define AR_DIAG_FORCE_RX_CLEAR      0x00100000 /* force rx_clear high */
 #define AR_DIAG_IGNORE_VIRT_CS      0x00200000
 #define AR_DIAG_FORCE_CH_IDLE_HIGH  0x00400000
 #define AR_DIAG_EIFS_CTRL_ENA       0x00800000
 #define AR_DIAG_DUAL_CHAIN_INFO     0x01000000
-#define AR_DIAG_RX_ABORT            0x02000000
+#define AR_DIAG_RX_ABORT            0x02000000 /* Force RX abort */
 #define AR_DIAG_SATURATE_CYCLE_CNT  0x04000000
 #define AR_DIAG_OBS_PT_SEL2         0x08000000
 #define AR_DIAG_RX_CLEAR_CTL_LOW    0x10000000
@@ -1421,9 +1432,6 @@
 #define AR_SLEEP2_BEACON_TIMEOUT    0xFFE00000
 #define AR_SLEEP2_BEACON_TIMEOUT_S  21
 
-#define AR_BSSMSKL            0x80e0
-#define AR_BSSMSKU            0x80e4
-
 #define AR_TPC                 0x80e8
 #define AR_TPC_ACK             0x0000003f
 #define AR_TPC_ACK_S           0x00
@@ -1705,4 +1713,7 @@
 #define AR_KEYTABLE_MAC0(_n)    (AR_KEYTABLE(_n) + 24)
 #define AR_KEYTABLE_MAC1(_n)    (AR_KEYTABLE(_n) + 28)
 
+#define AR9271_CORE_CLOCK	117   /* clock to 117Mhz */
+#define AR9271_TARGET_BAUD_RATE	19200 /* 115200 */
+
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index 19b88f8..cd26caa 100644
--- a/drivers/net/wireless/ath/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
@@ -40,6 +40,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_vif_iter_data iter_data;
 	int i, j;
 	u8 mask[ETH_ALEN];
@@ -51,7 +52,7 @@
 	 */
 	iter_data.addr = kmalloc(ETH_ALEN, GFP_ATOMIC);
 	if (iter_data.addr) {
-		memcpy(iter_data.addr, sc->sc_ah->macaddr, ETH_ALEN);
+		memcpy(iter_data.addr, common->macaddr, ETH_ALEN);
 		iter_data.count = 1;
 	} else
 		iter_data.count = 0;
@@ -86,20 +87,21 @@
 	kfree(iter_data.addr);
 
 	/* Invert the mask and configure hardware */
-	sc->bssidmask[0] = ~mask[0];
-	sc->bssidmask[1] = ~mask[1];
-	sc->bssidmask[2] = ~mask[2];
-	sc->bssidmask[3] = ~mask[3];
-	sc->bssidmask[4] = ~mask[4];
-	sc->bssidmask[5] = ~mask[5];
+	common->bssidmask[0] = ~mask[0];
+	common->bssidmask[1] = ~mask[1];
+	common->bssidmask[2] = ~mask[2];
+	common->bssidmask[3] = ~mask[3];
+	common->bssidmask[4] = ~mask[4];
+	common->bssidmask[5] = ~mask[5];
 
-	ath9k_hw_setbssidmask(sc);
+	ath_hw_setbssidmask(common);
 }
 
 int ath9k_wiphy_add(struct ath_softc *sc)
 {
 	int i, error;
 	struct ath_wiphy *aphy;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ieee80211_hw *hw;
 	u8 addr[ETH_ALEN];
 
@@ -138,7 +140,7 @@
 	sc->sec_wiphy[i] = aphy;
 	spin_unlock_bh(&sc->wiphy_lock);
 
-	memcpy(addr, sc->sc_ah->macaddr, ETH_ALEN);
+	memcpy(addr, common->macaddr, ETH_ALEN);
 	addr[0] |= 0x02; /* Locally managed address */
 	/*
 	 * XOR virtual wiphy index into the least significant bits to generate
@@ -296,6 +298,7 @@
 void ath9k_wiphy_chan_work(struct work_struct *work)
 {
 	struct ath_softc *sc = container_of(work, struct ath_softc, chan_work);
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_wiphy *aphy = sc->next_wiphy;
 
 	if (aphy == NULL)
@@ -311,6 +314,10 @@
 	/* XXX: remove me eventually */
 	ath9k_update_ichannel(sc, aphy->hw,
 			      &sc->sc_ah->channels[sc->chan_idx]);
+
+	/* sync hw configuration for hw code */
+	common->hw = aphy->hw;
+
 	ath_update_chainmask(sc, sc->chan_is_ht);
 	if (ath_set_channel(sc, aphy->hw,
 			    &sc->sc_ah->channels[sc->chan_idx]) < 0) {
@@ -331,13 +338,11 @@
 void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ath_wiphy *aphy = hw->priv;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
 
-	if (tx_info_priv && tx_info_priv->frame_type == ATH9K_INT_PAUSE &&
+	if ((tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_PAUSE) &&
 	    aphy->state == ATH_WIPHY_PAUSING) {
-		if (!(info->flags & IEEE80211_TX_STAT_ACK)) {
+		if (!(tx_info->flags & IEEE80211_TX_STAT_ACK)) {
 			printk(KERN_DEBUG "ath9k: %s: no ACK for pause "
 			       "frame\n", wiphy_name(hw->wiphy));
 			/*
@@ -356,9 +361,6 @@
 		}
 	}
 
-	kfree(tx_info_priv);
-	tx_info->rate_driver_data[0] = NULL;
-
 	dev_kfree_skb(skb);
 }
 
@@ -519,8 +521,9 @@
 			 * frame being completed)
 			 */
 			spin_unlock_bh(&sc->wiphy_lock);
-			ath_radio_disable(sc);
-			ath_radio_enable(sc);
+			ath_radio_disable(sc, aphy->hw);
+			ath_radio_enable(sc, aphy->hw);
+			/* Only the primary wiphy hw is used for queuing work */
 			ieee80211_queue_work(aphy->sc->hw,
 				   &aphy->sc->chan_work);
 			return -EBUSY; /* previous select still in progress */
@@ -666,15 +669,78 @@
 bool ath9k_all_wiphys_idle(struct ath_softc *sc)
 {
 	unsigned int i;
-	if (sc->pri_wiphy->state != ATH_WIPHY_INACTIVE) {
+	if (!sc->pri_wiphy->idle)
 		return false;
-	}
 	for (i = 0; i < sc->num_sec_wiphy; i++) {
 		struct ath_wiphy *aphy = sc->sec_wiphy[i];
 		if (!aphy)
 			continue;
-		if (aphy->state != ATH_WIPHY_INACTIVE)
+		if (!aphy->idle)
 			return false;
 	}
 	return true;
 }
+
+/* caller must hold wiphy_lock */
+void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle)
+{
+	struct ath_softc *sc = aphy->sc;
+
+	aphy->idle = idle;
+	ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+		  "Marking %s as %s\n",
+		  wiphy_name(aphy->hw->wiphy),
+		  idle ? "idle" : "not-idle");
+}
+/* Only bother starting a queue on an active virtual wiphy */
+void ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue)
+{
+	struct ieee80211_hw *hw = sc->pri_wiphy->hw;
+	unsigned int i;
+
+	spin_lock_bh(&sc->wiphy_lock);
+
+	/* Start the primary wiphy */
+	if (sc->pri_wiphy->state == ATH_WIPHY_ACTIVE) {
+		ieee80211_wake_queue(hw, skb_queue);
+		goto unlock;
+	}
+
+	/* Now start the secondary wiphy queues */
+	for (i = 0; i < sc->num_sec_wiphy; i++) {
+		struct ath_wiphy *aphy = sc->sec_wiphy[i];
+		if (!aphy)
+			continue;
+		if (aphy->state != ATH_WIPHY_ACTIVE)
+			continue;
+
+		hw = aphy->hw;
+		ieee80211_wake_queue(hw, skb_queue);
+		break;
+	}
+
+unlock:
+	spin_unlock_bh(&sc->wiphy_lock);
+}
+
+/* Go ahead and propagate information to all virtual wiphys, it won't hurt */
+void ath_mac80211_stop_queue(struct ath_softc *sc, u16 skb_queue)
+{
+	struct ieee80211_hw *hw = sc->pri_wiphy->hw;
+	unsigned int i;
+
+	spin_lock_bh(&sc->wiphy_lock);
+
+	/* Stop the primary wiphy */
+	ieee80211_stop_queue(hw, skb_queue);
+
+	/* Now stop the secondary wiphy queues */
+	for (i = 0; i < sc->num_sec_wiphy; i++) {
+		struct ath_wiphy *aphy = sc->sec_wiphy[i];
+		if (!aphy)
+			continue;
+		hw = aphy->hw;
+		ieee80211_stop_queue(hw, skb_queue);
+	}
+	spin_unlock_bh(&sc->wiphy_lock);
+}
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 42551a4..564c6cb 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -70,6 +70,29 @@
 static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds,
 			     int nbad, int txok, bool update_rc);
 
+enum {
+	MCS_DEFAULT,
+	MCS_HT40,
+	MCS_HT40_SGI,
+};
+
+static int ath_max_4ms_framelen[3][16] = {
+	[MCS_DEFAULT] = {
+		3216,  6434,  9650,  12868, 19304, 25740,  28956,  32180,
+		6430,  12860, 19300, 25736, 38600, 51472,  57890,  64320,
+	},
+	[MCS_HT40] = {
+		6684,  13368, 20052, 26738, 40104, 53476,  60156,  66840,
+		13360, 26720, 40080, 53440, 80160, 106880, 120240, 133600,
+	},
+	[MCS_HT40_SGI] = {
+		/* TODO: Only MCS 7 and 15 updated, recalculate the rest */
+		6684,  13368, 20052, 26738, 40104, 53476,  60156,  74200,
+		13360, 26720, 40080, 53440, 80160, 106880, 120240, 148400,
+	}
+};
+
+
 /*********************/
 /* Aggregation logic */
 /*********************/
@@ -107,7 +130,7 @@
 {
 	struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum];
 
-	ASSERT(tid->paused > 0);
+	BUG_ON(tid->paused <= 0);
 	spin_lock_bh(&txq->axq_lock);
 
 	tid->paused--;
@@ -131,7 +154,7 @@
 	struct list_head bf_head;
 	INIT_LIST_HEAD(&bf_head);
 
-	ASSERT(tid->paused > 0);
+	BUG_ON(tid->paused <= 0);
 	spin_lock_bh(&txq->axq_lock);
 
 	tid->paused--;
@@ -143,7 +166,7 @@
 
 	while (!list_empty(&tid->buf_q)) {
 		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
-		ASSERT(!bf_isretried(bf));
+		BUG_ON(bf_isretried(bf));
 		list_move_tail(&bf->list, &bf_head);
 		ath_tx_send_ht_normal(sc, txq, tid, &bf_head);
 	}
@@ -178,7 +201,7 @@
 	index  = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno);
 	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
 
-	ASSERT(tid->tx_buf[cindex] == NULL);
+	BUG_ON(tid->tx_buf[cindex] != NULL);
 	tid->tx_buf[cindex] = bf;
 
 	if (index >= ((tid->baw_tail - tid->baw_head) &
@@ -251,6 +274,7 @@
 
 	ATH_TXBUF_RESET(tbf);
 
+	tbf->aphy = bf->aphy;
 	tbf->bf_mpdu = bf->bf_mpdu;
 	tbf->bf_buf_addr = bf->bf_buf_addr;
 	*(tbf->bf_desc) = *(bf->bf_desc);
@@ -267,7 +291,9 @@
 	struct ath_node *an = NULL;
 	struct sk_buff *skb;
 	struct ieee80211_sta *sta;
+	struct ieee80211_hw *hw;
 	struct ieee80211_hdr *hdr;
+	struct ieee80211_tx_info *tx_info;
 	struct ath_atx_tid *tid = NULL;
 	struct ath_buf *bf_next, *bf_last = bf->bf_lastbf;
 	struct ath_desc *ds = bf_last->bf_desc;
@@ -280,9 +306,13 @@
 	skb = bf->bf_mpdu;
 	hdr = (struct ieee80211_hdr *)skb->data;
 
+	tx_info = IEEE80211_SKB_CB(skb);
+	hw = bf->aphy->hw;
+
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(sc->hw, hdr->addr1);
+	/* XXX: use ieee80211_find_sta! */
+	sta = ieee80211_find_sta_by_hw(hw, hdr->addr1);
 	if (!sta) {
 		rcu_read_unlock();
 		return;
@@ -358,7 +388,7 @@
 			else
 				INIT_LIST_HEAD(&bf_head);
 		} else {
-			ASSERT(!list_empty(bf_q));
+			BUG_ON(list_empty(bf_q));
 			list_move_tail(&bf->list, &bf_head);
 		}
 
@@ -452,11 +482,9 @@
 static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
 			   struct ath_atx_tid *tid)
 {
-	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
-	struct ath_tx_info_priv *tx_info_priv;
 	u32 max_4ms_framelen, frmlen;
 	u16 aggr_limit, legacy = 0;
 	int i;
@@ -464,7 +492,6 @@
 	skb = bf->bf_mpdu;
 	tx_info = IEEE80211_SKB_CB(skb);
 	rates = tx_info->control.rates;
-	tx_info_priv = (struct ath_tx_info_priv *)tx_info->rate_driver_data[0];
 
 	/*
 	 * Find the lowest frame length among the rate series that will have a
@@ -475,12 +502,20 @@
 
 	for (i = 0; i < 4; i++) {
 		if (rates[i].count) {
-			if (!WLAN_RC_PHY_HT(rate_table->info[rates[i].idx].phy)) {
+			int modeidx;
+			if (!(rates[i].flags & IEEE80211_TX_RC_MCS)) {
 				legacy = 1;
 				break;
 			}
 
-			frmlen = rate_table->info[rates[i].idx].max_4ms_framelen;
+			if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
+				modeidx = MCS_HT40_SGI;
+			else if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+				modeidx = MCS_HT40;
+			else
+				modeidx = MCS_DEFAULT;
+
+			frmlen = ath_max_4ms_framelen[modeidx][rates[i].idx];
 			max_4ms_framelen = min(max_4ms_framelen, frmlen);
 		}
 	}
@@ -518,12 +553,11 @@
 static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 				  struct ath_buf *bf, u16 frmlen)
 {
-	const struct ath_rate_table *rt = sc->cur_rate_table;
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	u32 nsymbits, nsymbols;
 	u16 minlen;
-	u8 rc, flags, rix;
+	u8 flags, rix;
 	int width, half_gi, ndelim, mindelim;
 
 	/* Select standard number of delimiters based on frame length alone */
@@ -553,7 +587,6 @@
 
 	rix = tx_info->control.rates[0].idx;
 	flags = tx_info->control.rates[0].flags;
-	rc = rt->info[rix].ratecode;
 	width = (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) ? 1 : 0;
 	half_gi = (flags & IEEE80211_TX_RC_SHORT_GI) ? 1 : 0;
 
@@ -565,7 +598,7 @@
 	if (nsymbols == 0)
 		nsymbols = 1;
 
-	nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width];
+	nsymbits = bits_per_symbol[rix][width];
 	minlen = (nsymbols * nsymbits) / BITS_PER_BYTE;
 
 	if (frmlen < minlen) {
@@ -694,7 +727,6 @@
 		/* anchor last desc of aggregate */
 		ath9k_hw_set11n_aggr_last(sc->sc_ah, bf->bf_lastbf->bf_desc);
 
-		txq->axq_aggr_depth++;
 		ath_tx_txqaddbuf(sc, txq, &bf_q);
 		TX_STAT_INC(txq->axq_qnum, a_aggr);
 
@@ -815,6 +847,7 @@
 struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info qi;
 	int qnum;
 
@@ -854,9 +887,9 @@
 		return NULL;
 	}
 	if (qnum >= ARRAY_SIZE(sc->tx.txq)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"qnum %u out of range, max %u!\n",
-			qnum, (unsigned int)ARRAY_SIZE(sc->tx.txq));
+		ath_print(common, ATH_DBG_FATAL,
+			  "qnum %u out of range, max %u!\n",
+			  qnum, (unsigned int)ARRAY_SIZE(sc->tx.txq));
 		ath9k_hw_releasetxqueue(ah, qnum);
 		return NULL;
 	}
@@ -869,8 +902,6 @@
 		INIT_LIST_HEAD(&txq->axq_acq);
 		spin_lock_init(&txq->axq_lock);
 		txq->axq_depth = 0;
-		txq->axq_aggr_depth = 0;
-		txq->axq_linkbuf = NULL;
 		txq->axq_tx_inprogress = false;
 		sc->tx.txqsetup |= 1<<qnum;
 	}
@@ -884,9 +915,9 @@
 	switch (qtype) {
 	case ATH9K_TX_QUEUE_DATA:
 		if (haltype >= ARRAY_SIZE(sc->tx.hwq_map)) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"HAL AC %u out of range, max %zu!\n",
-				haltype, ARRAY_SIZE(sc->tx.hwq_map));
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+				  "HAL AC %u out of range, max %zu!\n",
+				  haltype, ARRAY_SIZE(sc->tx.hwq_map));
 			return -1;
 		}
 		qnum = sc->tx.hwq_map[haltype];
@@ -906,18 +937,19 @@
 struct ath_txq *ath_test_get_txq(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ath_txq *txq = NULL;
+	u16 skb_queue = skb_get_queue_mapping(skb);
 	int qnum;
 
-	qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
+	qnum = ath_get_hal_qnum(skb_queue, sc);
 	txq = &sc->tx.txq[qnum];
 
 	spin_lock_bh(&txq->axq_lock);
 
 	if (txq->axq_depth >= (ATH_TXBUF - 20)) {
-		DPRINTF(sc, ATH_DBG_XMIT,
-			"TX queue: %d is full, depth: %d\n",
-			qnum, txq->axq_depth);
-		ieee80211_stop_queue(sc->hw, skb_get_queue_mapping(skb));
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_XMIT,
+			  "TX queue: %d is full, depth: %d\n",
+			  qnum, txq->axq_depth);
+		ath_mac80211_stop_queue(sc, skb_queue);
 		txq->stopped = 1;
 		spin_unlock_bh(&txq->axq_lock);
 		return NULL;
@@ -945,7 +977,7 @@
 		return 0;
 	}
 
-	ASSERT(sc->tx.txq[qnum].axq_qnum == qnum);
+	BUG_ON(sc->tx.txq[qnum].axq_qnum != qnum);
 
 	ath9k_hw_get_txq_props(ah, qnum, &qi);
 	qi.tqi_aifs = qinfo->tqi_aifs;
@@ -955,8 +987,8 @@
 	qi.tqi_readyTime = qinfo->tqi_readyTime;
 
 	if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to update hardware queue %u!\n", qnum);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unable to update hardware queue %u!\n", qnum);
 		error = -EIO;
 	} else {
 		ath9k_hw_resettxqueue(ah, qnum);
@@ -1004,7 +1036,6 @@
 
 		if (list_empty(&txq->axq_q)) {
 			txq->axq_link = NULL;
-			txq->axq_linkbuf = NULL;
 			spin_unlock_bh(&txq->axq_lock);
 			break;
 		}
@@ -1055,6 +1086,7 @@
 void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_txq *txq;
 	int i, npend = 0;
 
@@ -1076,14 +1108,15 @@
 	if (npend) {
 		int r;
 
-		DPRINTF(sc, ATH_DBG_XMIT, "Unable to stop TxDMA. Reset HAL!\n");
+		ath_print(common, ATH_DBG_XMIT,
+			  "Unable to stop TxDMA. Reset HAL!\n");
 
 		spin_lock_bh(&sc->sc_resetlock);
 		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true);
 		if (r)
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Unable to reset hardware; reset status %d\n",
-				r);
+			ath_print(common, ATH_DBG_FATAL,
+				  "Unable to reset hardware; reset status %d\n",
+				  r);
 		spin_unlock_bh(&sc->sc_resetlock);
 	}
 
@@ -1147,8 +1180,8 @@
 	struct ath_txq *txq;
 
 	if (haltype >= ARRAY_SIZE(sc->tx.hwq_map)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"HAL AC %u out of range, max %zu!\n",
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "HAL AC %u out of range, max %zu!\n",
 			 haltype, ARRAY_SIZE(sc->tx.hwq_map));
 		return 0;
 	}
@@ -1172,6 +1205,7 @@
 			     struct list_head *head)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf;
 
 	/*
@@ -1186,21 +1220,20 @@
 
 	list_splice_tail_init(head, &txq->axq_q);
 	txq->axq_depth++;
-	txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
 
-	DPRINTF(sc, ATH_DBG_QUEUE,
-		"qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
+	ath_print(common, ATH_DBG_QUEUE,
+		  "qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
 
 	if (txq->axq_link == NULL) {
 		ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
-		DPRINTF(sc, ATH_DBG_XMIT,
-			"TXDP[%u] = %llx (%p)\n",
-			txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
+		ath_print(common, ATH_DBG_XMIT,
+			  "TXDP[%u] = %llx (%p)\n",
+			  txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
 	} else {
 		*txq->axq_link = bf->bf_daddr;
-		DPRINTF(sc, ATH_DBG_XMIT, "link[%u] (%p)=%llx (%p)\n",
-			txq->axq_qnum, txq->axq_link,
-			ito64(bf->bf_daddr), bf->bf_desc);
+		ath_print(common, ATH_DBG_XMIT, "link[%u] (%p)=%llx (%p)\n",
+			  txq->axq_qnum, txq->axq_link,
+			  ito64(bf->bf_daddr), bf->bf_desc);
 	}
 	txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link);
 	ath9k_hw_txstart(ah, txq->axq_qnum);
@@ -1420,22 +1453,14 @@
 static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
 			    int width, int half_gi, bool shortPreamble)
 {
-	const struct ath_rate_table *rate_table = sc->cur_rate_table;
 	u32 nbits, nsymbits, duration, nsymbols;
-	u8 rc;
 	int streams, pktlen;
 
 	pktlen = bf_isaggr(bf) ? bf->bf_al : bf->bf_frmlen;
-	rc = rate_table->info[rix].ratecode;
-
-	/* for legacy rates, use old function to compute packet duration */
-	if (!IS_HT_RATE(rc))
-		return ath9k_hw_computetxtime(sc->sc_ah, rate_table, pktlen,
-					      rix, shortPreamble);
 
 	/* find number of symbols: PLCP + data */
 	nbits = (pktlen << 3) + OFDM_PLCP_BITS;
-	nsymbits = bits_per_symbol[HT_RC_2_MCS(rc)][width];
+	nsymbits = bits_per_symbol[rix][width];
 	nsymbols = (nbits + nsymbits - 1) / nsymbits;
 
 	if (!half_gi)
@@ -1444,7 +1469,7 @@
 		duration = SYMBOL_TIME_HALFGI(nsymbols);
 
 	/* addup duration for legacy/ht training and signal fields */
-	streams = HT_RC_2_STREAMS(rc);
+	streams = HT_RC_2_STREAMS(rix);
 	duration += L_STF + L_LTF + L_SIG + HT_SIG + HT_STF + HT_LTF(streams);
 
 	return duration;
@@ -1452,11 +1477,12 @@
 
 static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 {
-	const struct ath_rate_table *rt = sc->cur_rate_table;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_11n_rate_series series[4];
 	struct sk_buff *skb;
 	struct ieee80211_tx_info *tx_info;
 	struct ieee80211_tx_rate *rates;
+	const struct ieee80211_rate *rate;
 	struct ieee80211_hdr *hdr;
 	int i, flags = 0;
 	u8 rix = 0, ctsrate = 0;
@@ -1475,11 +1501,10 @@
 	 * checking the BSS's global flag.
 	 * But for the rate series, IEEE80211_TX_RC_USE_SHORT_PREAMBLE is used.
 	 */
+	rate = ieee80211_get_rts_cts_rate(sc->hw, tx_info);
+	ctsrate = rate->hw_value;
 	if (sc->sc_flags & SC_OP_PREAMBLE_SHORT)
-		ctsrate = rt->info[tx_info->control.rts_cts_rate_idx].ratecode |
-			rt->info[tx_info->control.rts_cts_rate_idx].short_preamble;
-	else
-		ctsrate = rt->info[tx_info->control.rts_cts_rate_idx].ratecode;
+		ctsrate |= rate->hw_value_short;
 
 	/*
 	 * ATH9K_TXDESC_RTSENA and ATH9K_TXDESC_CTSENA are mutually exclusive.
@@ -1502,18 +1527,15 @@
 		flags &= ~(ATH9K_TXDESC_RTSENA);
 
 	for (i = 0; i < 4; i++) {
+		bool is_40, is_sgi, is_sp;
+		int phy;
+
 		if (!rates[i].count || (rates[i].idx < 0))
 			continue;
 
 		rix = rates[i].idx;
 		series[i].Tries = rates[i].count;
-		series[i].ChSel = sc->tx_chainmask;
-
-		if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
-			series[i].Rate = rt->info[rix].ratecode |
-				rt->info[rix].short_preamble;
-		else
-			series[i].Rate = rt->info[rix].ratecode;
+		series[i].ChSel = common->tx_chainmask;
 
 		if (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)
 			series[i].RateFlags |= ATH9K_RATESERIES_RTS_CTS;
@@ -1522,10 +1544,36 @@
 		if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
 			series[i].RateFlags |= ATH9K_RATESERIES_HALFGI;
 
-		series[i].PktDuration = ath_pkt_duration(sc, rix, bf,
-			 (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) != 0,
-			 (rates[i].flags & IEEE80211_TX_RC_SHORT_GI),
-			 (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE));
+		is_sgi = !!(rates[i].flags & IEEE80211_TX_RC_SHORT_GI);
+		is_40 = !!(rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH);
+		is_sp = !!(rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE);
+
+		if (rates[i].flags & IEEE80211_TX_RC_MCS) {
+			/* MCS rates */
+			series[i].Rate = rix | 0x80;
+			series[i].PktDuration = ath_pkt_duration(sc, rix, bf,
+				 is_40, is_sgi, is_sp);
+			continue;
+		}
+
+		/* legcay rates */
+		if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
+		    !(rate->flags & IEEE80211_RATE_ERP_G))
+			phy = WLAN_RC_PHY_CCK;
+		else
+			phy = WLAN_RC_PHY_OFDM;
+
+		rate = &sc->sbands[tx_info->band].bitrates[rates[i].idx];
+		series[i].Rate = rate->hw_value;
+		if (rate->hw_value_short) {
+			if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+				series[i].Rate |= rate->hw_value_short;
+		} else {
+			is_sp = false;
+		}
+
+		series[i].PktDuration = ath9k_hw_computetxtime(sc->sc_ah,
+			phy, rate->bitrate * 100, bf->bf_frmlen, rix, is_sp);
 	}
 
 	/* set dur_update_en for l-sig computation except for PS-Poll frames */
@@ -1546,24 +1594,36 @@
 	struct ath_softc *sc = aphy->sc;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct ath_tx_info_priv *tx_info_priv;
 	int hdrlen;
 	__le16 fc;
+	int padpos, padsize;
 
-	tx_info_priv = kzalloc(sizeof(*tx_info_priv), GFP_ATOMIC);
-	if (unlikely(!tx_info_priv))
-		return -ENOMEM;
-	tx_info->rate_driver_data[0] = tx_info_priv;
-	tx_info_priv->aphy = aphy;
-	tx_info_priv->frame_type = txctl->frame_type;
+	tx_info->pad[0] = 0;
+	switch (txctl->frame_type) {
+	case ATH9K_NOT_INTERNAL:
+		break;
+	case ATH9K_INT_PAUSE:
+		tx_info->pad[0] |= ATH_TX_INFO_FRAME_TYPE_PAUSE;
+		/* fall through */
+	case ATH9K_INT_UNPAUSE:
+		tx_info->pad[0] |= ATH_TX_INFO_FRAME_TYPE_INTERNAL;
+		break;
+	}
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 	fc = hdr->frame_control;
 
 	ATH_TXBUF_RESET(bf);
 
-	bf->bf_frmlen = skb->len + FCS_LEN - (hdrlen & 3);
+	bf->aphy = aphy;
+	bf->bf_frmlen = skb->len + FCS_LEN;
+	/* Remove the padding size from bf_frmlen, if any */
+	padpos = ath9k_cmn_padpos(hdr->frame_control);
+	padsize = padpos & 3;
+	if (padsize && skb->len>padpos+padsize) {
+		bf->bf_frmlen -= padsize;
+	}
 
-	if (conf_is_ht(&sc->hw->conf) && !is_pae(skb))
+	if (conf_is_ht(&hw->conf) && !is_pae(skb))
 		bf->bf_state.bf_type |= BUF_HT;
 
 	bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
@@ -1585,13 +1645,20 @@
 					   skb->len, DMA_TO_DEVICE);
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_dmacontext))) {
 		bf->bf_mpdu = NULL;
-		kfree(tx_info_priv);
-		tx_info->rate_driver_data[0] = NULL;
-		DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error() on TX\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "dma_mapping_error() on TX\n");
 		return -ENOMEM;
 	}
 
 	bf->bf_buf_addr = bf->bf_dmacontext;
+
+	/* tag if this is a nullfunc frame to enable PS when AP acks it */
+	if (ieee80211_is_nullfunc(fc) && ieee80211_has_pm(fc)) {
+		bf->bf_isnullfunc = true;
+		sc->sc_flags &= ~SC_OP_NULLFUNC_COMPLETED;
+	} else
+		bf->bf_isnullfunc = false;
+
 	return 0;
 }
 
@@ -1669,12 +1736,13 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_buf *bf;
 	int r;
 
 	bf = ath_tx_get_buffer(sc);
 	if (!bf) {
-		DPRINTF(sc, ATH_DBG_XMIT, "TX buffers are full\n");
+		ath_print(common, ATH_DBG_XMIT, "TX buffers are full\n");
 		return -1;
 	}
 
@@ -1682,7 +1750,7 @@
 	if (unlikely(r)) {
 		struct ath_txq *txq = txctl->txq;
 
-		DPRINTF(sc, ATH_DBG_FATAL, "TX mem alloc failure\n");
+		ath_print(common, ATH_DBG_FATAL, "TX mem alloc failure\n");
 
 		/* upon ath_tx_processq() this TX queue will be resumed, we
 		 * guarantee this will happen by knowing beforehand that
@@ -1690,8 +1758,7 @@
 		 * on the queue */
 		spin_lock_bh(&txq->axq_lock);
 		if (sc->tx.txq[txq->axq_qnum].axq_depth > 1) {
-			ieee80211_stop_queue(sc->hw,
-				skb_get_queue_mapping(skb));
+			ath_mac80211_stop_queue(sc, skb_get_queue_mapping(skb));
 			txq->stopped = 1;
 		}
 		spin_unlock_bh(&txq->axq_lock);
@@ -1712,6 +1779,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int hdrlen, padsize;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_control txctl;
@@ -1736,7 +1804,8 @@
 	if (hdrlen & 3) {
 		padsize = hdrlen % 4;
 		if (skb_headroom(skb) < padsize) {
-			DPRINTF(sc, ATH_DBG_XMIT, "TX CABQ padding failed\n");
+			ath_print(common, ATH_DBG_XMIT,
+				  "TX CABQ padding failed\n");
 			dev_kfree_skb_any(skb);
 			return;
 		}
@@ -1746,10 +1815,11 @@
 
 	txctl.txq = sc->beacon.cabq;
 
-	DPRINTF(sc, ATH_DBG_XMIT, "transmitting CABQ packet, skb: %p\n", skb);
+	ath_print(common, ATH_DBG_XMIT,
+		  "transmitting CABQ packet, skb: %p\n", skb);
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		DPRINTF(sc, ATH_DBG_XMIT, "CABQ TX failed\n");
+		ath_print(common, ATH_DBG_XMIT, "CABQ TX failed\n");
 		goto exit;
 	}
 
@@ -1763,26 +1833,17 @@
 /*****************/
 
 static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
-			    int tx_flags)
+			    struct ath_wiphy *aphy, int tx_flags)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int hdrlen, padsize;
-	int frame_type = ATH9K_NOT_INTERNAL;
 
-	DPRINTF(sc, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
+	ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
 
-	if (tx_info_priv) {
-		hw = tx_info_priv->aphy->hw;
-		frame_type = tx_info_priv->frame_type;
-	}
-
-	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK ||
-	    tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
-		kfree(tx_info_priv);
-		tx_info->rate_driver_data[0] = NULL;
-	}
+	if (aphy)
+		hw = aphy->hw;
 
 	if (tx_flags & ATH_TX_BAR)
 		tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
@@ -1805,18 +1866,19 @@
 
 	if (sc->sc_flags & SC_OP_WAIT_FOR_TX_ACK) {
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_TX_ACK;
-		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
-			"received TX status (0x%x)\n",
+		ath_print(common, ATH_DBG_PS,
+			  "Going back to sleep after having "
+			  "received TX status (0x%x)\n",
 			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
 					SC_OP_WAIT_FOR_CAB |
 					SC_OP_WAIT_FOR_PSPOLL_DATA |
 					SC_OP_WAIT_FOR_TX_ACK));
 	}
 
-	if (frame_type == ATH9K_NOT_INTERNAL)
-		ieee80211_tx_status(hw, skb);
-	else
+	if (unlikely(tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_INTERNAL))
 		ath9k_tx_status(hw, skb);
+	else
+		ieee80211_tx_status(hw, skb);
 }
 
 static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
@@ -1839,7 +1901,7 @@
 	}
 
 	dma_unmap_single(sc->dev, bf->bf_dmacontext, skb->len, DMA_TO_DEVICE);
-	ath_tx_complete(sc, skb, tx_flags);
+	ath_tx_complete(sc, skb, bf->aphy, tx_flags);
 	ath_debug_stat_tx(sc, txq, bf);
 
 	/*
@@ -1887,8 +1949,7 @@
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
-	struct ieee80211_hw *hw = tx_info_priv->aphy->hw;
+	struct ieee80211_hw *hw = bf->aphy->hw;
 	u8 i, tx_rateindex;
 
 	if (txok)
@@ -1897,22 +1958,29 @@
 	tx_rateindex = ds->ds_txstat.ts_rateindex;
 	WARN_ON(tx_rateindex >= hw->max_rates);
 
-	tx_info_priv->update_rc = update_rc;
+	if (update_rc)
+		tx_info->pad[0] |= ATH_TX_INFO_UPDATE_RC;
 	if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT)
 		tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
 
 	if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 &&
 	    (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0 && update_rc) {
 		if (ieee80211_is_data(hdr->frame_control)) {
-			memcpy(&tx_info_priv->tx, &ds->ds_txstat,
-			       sizeof(tx_info_priv->tx));
-			tx_info_priv->n_frames = bf->bf_nframes;
-			tx_info_priv->n_bad_frames = nbad;
+			if (ds->ds_txstat.ts_flags &
+			    (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN))
+				tx_info->pad[0] |= ATH_TX_INFO_UNDERRUN;
+			if ((ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY) ||
+			    (ds->ds_txstat.ts_status & ATH9K_TXERR_FIFO))
+				tx_info->pad[0] |= ATH_TX_INFO_XRETRY;
+			tx_info->status.ampdu_len = bf->bf_nframes;
+			tx_info->status.ampdu_ack_len = bf->bf_nframes - nbad;
 		}
 	}
 
-	for (i = tx_rateindex + 1; i < hw->max_rates; i++)
+	for (i = tx_rateindex + 1; i < hw->max_rates; i++) {
 		tx_info->status.rates[i].count = 0;
+		tx_info->status.rates[i].idx = -1;
+	}
 
 	tx_info->status.rates[tx_rateindex].count = bf->bf_retries + 1;
 }
@@ -1926,7 +1994,7 @@
 	    sc->tx.txq[txq->axq_qnum].axq_depth <= (ATH_TXBUF - 20)) {
 		qnum = ath_get_mac80211_qnum(txq->axq_qnum, sc);
 		if (qnum != -1) {
-			ieee80211_wake_queue(sc->hw, qnum);
+			ath_mac80211_start_queue(sc, qnum);
 			txq->stopped = 0;
 		}
 	}
@@ -1936,21 +2004,21 @@
 static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf, *lastbf, *bf_held = NULL;
 	struct list_head bf_head;
 	struct ath_desc *ds;
 	int txok;
 	int status;
 
-	DPRINTF(sc, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
-		txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
-		txq->axq_link);
+	ath_print(common, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
+		  txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
+		  txq->axq_link);
 
 	for (;;) {
 		spin_lock_bh(&txq->axq_lock);
 		if (list_empty(&txq->axq_q)) {
 			txq->axq_link = NULL;
-			txq->axq_linkbuf = NULL;
 			spin_unlock_bh(&txq->axq_lock);
 			break;
 		}
@@ -1984,10 +2052,19 @@
 			spin_unlock_bh(&txq->axq_lock);
 			break;
 		}
-		if (bf->bf_desc == txq->axq_lastdsWithCTS)
-			txq->axq_lastdsWithCTS = NULL;
-		if (ds == txq->axq_gatingds)
-			txq->axq_gatingds = NULL;
+
+		/*
+		 * We now know the nullfunc frame has been ACKed so we
+		 * can disable RX.
+		 */
+		if (bf->bf_isnullfunc &&
+		    (ds->ds_txstat.ts_status & ATH9K_TX_ACKED)) {
+			if ((sc->sc_flags & SC_OP_PS_ENABLED)) {
+				sc->ps_enabled = true;
+				ath9k_hw_setrxabort(sc->sc_ah, 1);
+			} else
+				sc->sc_flags |= SC_OP_NULLFUNC_COMPLETED;
+		}
 
 		/*
 		 * Remove ath_buf's of the same transmit unit from txq,
@@ -2001,9 +2078,6 @@
 				&txq->axq_q, lastbf->list.prev);
 
 		txq->axq_depth--;
-		if (bf_isaggr(bf))
-			txq->axq_aggr_depth--;
-
 		txok = (ds->ds_txstat.ts_status == 0);
 		txq->axq_tx_inprogress = false;
 		spin_unlock_bh(&txq->axq_lock);
@@ -2064,8 +2138,11 @@
 		}
 
 	if (needreset) {
-		DPRINTF(sc, ATH_DBG_RESET, "tx hung, resetting the chip\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET,
+			  "tx hung, resetting the chip\n");
+		ath9k_ps_wakeup(sc);
 		ath_reset(sc, false);
+		ath9k_ps_restore(sc);
 	}
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
@@ -2093,6 +2170,7 @@
 
 int ath_tx_init(struct ath_softc *sc, int nbufs)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int error = 0;
 
 	spin_lock_init(&sc->tx.txbuflock);
@@ -2100,16 +2178,16 @@
 	error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
 				  "tx", nbufs, 1);
 	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Failed to allocate tx descriptors: %d\n", error);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to allocate tx descriptors: %d\n", error);
 		goto err;
 	}
 
 	error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
 				  "beacon", ATH_BCBUF, 1);
 	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Failed to allocate beacon descriptors: %d\n", error);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to allocate beacon descriptors: %d\n", error);
 		goto err;
 	}
 
diff --git a/drivers/net/wireless/ath/debug.c b/drivers/net/wireless/ath/debug.c
new file mode 100644
index 0000000..53e77bd
--- /dev/null
+++ b/drivers/net/wireless/ath/debug.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath.h"
+#include "debug.h"
+
+void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
+{
+	va_list args;
+
+	if (likely(!(common->debug_mask & dbg_mask)))
+		return;
+
+	va_start(args, fmt);
+	printk(KERN_DEBUG "ath: ");
+	vprintk(fmt, args);
+	va_end(args);
+}
+EXPORT_SYMBOL(ath_print);
diff --git a/drivers/net/wireless/ath/debug.h b/drivers/net/wireless/ath/debug.h
new file mode 100644
index 0000000..d6b685a
--- /dev/null
+++ b/drivers/net/wireless/ath/debug.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_DEBUG_H
+#define ATH_DEBUG_H
+
+#include "ath.h"
+
+/**
+ * enum ath_debug_level - atheros wireless debug level
+ *
+ * @ATH_DBG_RESET: reset processing
+ * @ATH_DBG_QUEUE: hardware queue management
+ * @ATH_DBG_EEPROM: eeprom processing
+ * @ATH_DBG_CALIBRATE: periodic calibration
+ * @ATH_DBG_INTERRUPT: interrupt processing
+ * @ATH_DBG_REGULATORY: regulatory processing
+ * @ATH_DBG_ANI: adaptive noise immunitive processing
+ * @ATH_DBG_XMIT: basic xmit operation
+ * @ATH_DBG_BEACON: beacon handling
+ * @ATH_DBG_CONFIG: configuration of the hardware
+ * @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
+ * @ATH_DBG_PS: power save processing
+ * @ATH_DBG_HWTIMER: hardware timer handling
+ * @ATH_DBG_BTCOEX: bluetooth coexistance
+ * @ATH_DBG_ANY: enable all debugging
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. Each driver has its own method for enabling debugging and
+ * modifying debug level states -- but this is typically done through a
+ * module parameter 'debug' along with a respective 'debug' debugfs file
+ * entry.
+ */
+enum ATH_DEBUG {
+	ATH_DBG_RESET		= 0x00000001,
+	ATH_DBG_QUEUE		= 0x00000002,
+	ATH_DBG_EEPROM		= 0x00000004,
+	ATH_DBG_CALIBRATE	= 0x00000008,
+	ATH_DBG_INTERRUPT	= 0x00000010,
+	ATH_DBG_REGULATORY	= 0x00000020,
+	ATH_DBG_ANI		= 0x00000040,
+	ATH_DBG_XMIT		= 0x00000080,
+	ATH_DBG_BEACON		= 0x00000100,
+	ATH_DBG_CONFIG		= 0x00000200,
+	ATH_DBG_FATAL		= 0x00000400,
+	ATH_DBG_PS		= 0x00000800,
+	ATH_DBG_HWTIMER		= 0x00001000,
+	ATH_DBG_BTCOEX		= 0x00002000,
+	ATH_DBG_ANY		= 0xffffffff
+};
+
+#define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
+
+#ifdef CONFIG_ATH_DEBUG
+void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...);
+#else
+static inline void ath_print(struct ath_common *common,
+			     int dbg_mask,
+			     const char *fmt, ...)
+{
+}
+#endif /* CONFIG_ATH_DEBUG */
+
+#endif /* ATH_DEBUG_H */
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
new file mode 100644
index 0000000..ecc9eb0
--- /dev/null
+++ b/drivers/net/wireless/ath/hw.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <asm/unaligned.h>
+
+#include "ath.h"
+#include "reg.h"
+
+#define REG_READ	common->ops->read
+#define REG_WRITE	common->ops->write
+
+/**
+ * ath_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @common: the ath_common struct for the device.
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of  ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ *
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ *                  \
+ * MAC:        0001 |
+ * BSSID-01:   0100 | --> Belongs to us
+ * BSSID-02:   1001 |
+ *                  /
+ * -------------------
+ * BSSID-03:   0110  | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ *             On loop iteration for BSSID-01:
+ *             ~(0001 ^ 0100)  -> ~(0101)
+ *                             ->   1010
+ *             bssid_mask      =    1010
+ *
+ *             On loop iteration for BSSID-02:
+ *             bssid_mask &= ~(0001   ^   1001)
+ *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
+ *             bssid_mask =   (1010)  & ~(1001)
+ *             bssid_mask =   (1010)  &  (0110)
+ *             bssid_mask =   0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01:  0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ *  --> allow = (0010) == 0000 ? 1 : 0;
+ *  --> allow = 0
+ *
+ *  Lets now test a frame that should work:
+ *
+ * IFRAME-02:  0001 (we should allow)
+ *
+ *     allow = (0001 & 1010) == 1010
+ *
+ *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
+ *  --> allow = (0010) == (0010)
+ *  --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03:  0100 --> allowed
+ * IFRAME-04:  1001 --> allowed
+ * IFRAME-05:  1101 --> allowed but its not for us!!!
+ *
+ */
+void ath_hw_setbssidmask(struct ath_common *common)
+{
+	void *ah = common->ah;
+
+	REG_WRITE(ah, get_unaligned_le32(common->bssidmask), AR_BSSMSKL);
+	REG_WRITE(ah, get_unaligned_le16(common->bssidmask + 4), AR_BSSMSKU);
+}
+EXPORT_SYMBOL(ath_hw_setbssidmask);
diff --git a/drivers/net/wireless/ath/reg.h b/drivers/net/wireless/ath/reg.h
new file mode 100644
index 0000000..dfe1fbe
--- /dev/null
+++ b/drivers/net/wireless/ath/reg.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_REGISTERS_H
+#define ATH_REGISTERS_H
+
+/*
+ * BSSID mask registers. See ath_hw_set_bssid_mask()
+ * for detailed documentation about these registers.
+ */
+#define AR_BSSMSKL		0x80e0
+#define AR_BSSMSKU		0x80e4
+
+#endif /* ATH_REGISTERS_H */
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 077bcc1..039ac49 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -450,7 +450,7 @@
 	const struct ieee80211_regdomain *regd;
 
 	wiphy->reg_notifier = reg_notifier;
-	wiphy->strict_regulatory = true;
+	wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
 
 	if (ath_is_world_regd(reg)) {
 		/*
@@ -458,8 +458,7 @@
 		 * saved on the wiphy orig_* parameters
 		 */
 		regd = ath_world_regdomain(reg);
-		wiphy->custom_regulatory = true;
-		wiphy->strict_regulatory = false;
+		wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 	} else {
 		/*
 		 * This gets applied in the case of the absense of CRDA,
diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h
index c1dd857..a1c3952 100644
--- a/drivers/net/wireless/ath/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -65,10 +65,13 @@
 	CTRY_ALGERIA = 12,
 	CTRY_ARGENTINA = 32,
 	CTRY_ARMENIA = 51,
+	CTRY_ARUBA = 533,
 	CTRY_AUSTRALIA = 36,
 	CTRY_AUSTRIA = 40,
 	CTRY_AZERBAIJAN = 31,
 	CTRY_BAHRAIN = 48,
+	CTRY_BANGLADESH = 50,
+	CTRY_BARBADOS = 52,
 	CTRY_BELARUS = 112,
 	CTRY_BELGIUM = 56,
 	CTRY_BELIZE = 84,
@@ -77,6 +80,7 @@
 	CTRY_BRAZIL = 76,
 	CTRY_BRUNEI_DARUSSALAM = 96,
 	CTRY_BULGARIA = 100,
+	CTRY_CAMBODIA = 116,
 	CTRY_CANADA = 124,
 	CTRY_CHILE = 152,
 	CTRY_CHINA = 156,
@@ -97,7 +101,11 @@
 	CTRY_GEORGIA = 268,
 	CTRY_GERMANY = 276,
 	CTRY_GREECE = 300,
+	CTRY_GREENLAND = 304,
+	CTRY_GRENEDA = 308,
+	CTRY_GUAM = 316,
 	CTRY_GUATEMALA = 320,
+	CTRY_HAITI = 332,
 	CTRY_HONDURAS = 340,
 	CTRY_HONG_KONG = 344,
 	CTRY_HUNGARY = 348,
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 9847af7..248c670 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -288,13 +288,16 @@
 	{CTRY_DEFAULT, FCC1_FCCA, "CO"},
 	{CTRY_ALBANIA, NULL1_WORLD, "AL"},
 	{CTRY_ALGERIA, NULL1_WORLD, "DZ"},
-	{CTRY_ARGENTINA, APL3_WORLD, "AR"},
+	{CTRY_ARGENTINA, FCC3_WORLD, "AR"},
 	{CTRY_ARMENIA, ETSI4_WORLD, "AM"},
+	{CTRY_ARUBA, ETSI1_WORLD, "AW"},
 	{CTRY_AUSTRALIA, FCC2_WORLD, "AU"},
 	{CTRY_AUSTRALIA2, FCC6_WORLD, "AU"},
 	{CTRY_AUSTRIA, ETSI1_WORLD, "AT"},
 	{CTRY_AZERBAIJAN, ETSI4_WORLD, "AZ"},
 	{CTRY_BAHRAIN, APL6_WORLD, "BH"},
+	{CTRY_BANGLADESH, NULL1_WORLD, "BD"},
+	{CTRY_BARBADOS, FCC2_WORLD, "BB"},
 	{CTRY_BELARUS, ETSI1_WORLD, "BY"},
 	{CTRY_BELGIUM, ETSI1_WORLD, "BE"},
 	{CTRY_BELGIUM2, ETSI4_WORLD, "BL"},
@@ -304,13 +307,14 @@
 	{CTRY_BRAZIL, FCC3_WORLD, "BR"},
 	{CTRY_BRUNEI_DARUSSALAM, APL1_WORLD, "BN"},
 	{CTRY_BULGARIA, ETSI6_WORLD, "BG"},
-	{CTRY_CANADA, FCC2_FCCA, "CA"},
+	{CTRY_CAMBODIA, ETSI1_WORLD, "KH"},
+	{CTRY_CANADA, FCC3_FCCA, "CA"},
 	{CTRY_CANADA2, FCC6_FCCA, "CA"},
 	{CTRY_CHILE, APL6_WORLD, "CL"},
 	{CTRY_CHINA, APL1_WORLD, "CN"},
 	{CTRY_COLOMBIA, FCC1_FCCA, "CO"},
 	{CTRY_COSTA_RICA, FCC1_WORLD, "CR"},
-	{CTRY_CROATIA, ETSI3_WORLD, "HR"},
+	{CTRY_CROATIA, ETSI1_WORLD, "HR"},
 	{CTRY_CYPRUS, ETSI1_WORLD, "CY"},
 	{CTRY_CZECH, ETSI3_WORLD, "CZ"},
 	{CTRY_DENMARK, ETSI1_WORLD, "DK"},
@@ -324,18 +328,22 @@
 	{CTRY_GEORGIA, ETSI4_WORLD, "GE"},
 	{CTRY_GERMANY, ETSI1_WORLD, "DE"},
 	{CTRY_GREECE, ETSI1_WORLD, "GR"},
+	{CTRY_GREENLAND, ETSI1_WORLD, "GL"},
+	{CTRY_GRENEDA, FCC3_FCCA, "GD"},
+	{CTRY_GUAM, FCC1_FCCA, "GU"},
 	{CTRY_GUATEMALA, FCC1_FCCA, "GT"},
+	{CTRY_HAITI, ETSI1_WORLD, "HT"},
 	{CTRY_HONDURAS, NULL1_WORLD, "HN"},
-	{CTRY_HONG_KONG, FCC2_WORLD, "HK"},
+	{CTRY_HONG_KONG, FCC3_WORLD, "HK"},
 	{CTRY_HUNGARY, ETSI1_WORLD, "HU"},
 	{CTRY_ICELAND, ETSI1_WORLD, "IS"},
 	{CTRY_INDIA, APL6_WORLD, "IN"},
-	{CTRY_INDONESIA, APL1_WORLD, "ID"},
+	{CTRY_INDONESIA, NULL1_WORLD, "ID"},
 	{CTRY_IRAN, APL1_WORLD, "IR"},
 	{CTRY_IRELAND, ETSI1_WORLD, "IE"},
 	{CTRY_ISRAEL, NULL1_WORLD, "IL"},
 	{CTRY_ITALY, ETSI1_WORLD, "IT"},
-	{CTRY_JAMAICA, ETSI1_WORLD, "JM"},
+	{CTRY_JAMAICA, FCC3_WORLD, "JM"},
 
 	{CTRY_JAPAN, MKK1_MKKA, "JP"},
 	{CTRY_JAPAN1, MKK1_MKKB, "JP"},
@@ -402,7 +410,7 @@
 	{CTRY_KOREA_ROC, APL9_WORLD, "KR"},
 	{CTRY_KOREA_ROC2, APL2_WORLD, "K2"},
 	{CTRY_KOREA_ROC3, APL9_WORLD, "K3"},
-	{CTRY_KUWAIT, NULL1_WORLD, "KW"},
+	{CTRY_KUWAIT, ETSI3_WORLD, "KW"},
 	{CTRY_LATVIA, ETSI1_WORLD, "LV"},
 	{CTRY_LEBANON, NULL1_WORLD, "LB"},
 	{CTRY_LIECHTENSTEIN, ETSI1_WORLD, "LI"},
@@ -414,13 +422,13 @@
 	{CTRY_MALTA, ETSI1_WORLD, "MT"},
 	{CTRY_MEXICO, FCC1_FCCA, "MX"},
 	{CTRY_MONACO, ETSI4_WORLD, "MC"},
-	{CTRY_MOROCCO, NULL1_WORLD, "MA"},
+	{CTRY_MOROCCO, APL4_WORLD, "MA"},
 	{CTRY_NEPAL, APL1_WORLD, "NP"},
 	{CTRY_NETHERLANDS, ETSI1_WORLD, "NL"},
 	{CTRY_NETHERLANDS_ANTILLES, ETSI1_WORLD, "AN"},
 	{CTRY_NEW_ZEALAND, FCC2_ETSIC, "NZ"},
 	{CTRY_NORWAY, ETSI1_WORLD, "NO"},
-	{CTRY_OMAN, APL6_WORLD, "OM"},
+	{CTRY_OMAN, FCC3_WORLD, "OM"},
 	{CTRY_PAKISTAN, NULL1_WORLD, "PK"},
 	{CTRY_PANAMA, FCC1_FCCA, "PA"},
 	{CTRY_PAPUA_NEW_GUINEA, FCC1_WORLD, "PG"},
@@ -429,7 +437,7 @@
 	{CTRY_POLAND, ETSI1_WORLD, "PL"},
 	{CTRY_PORTUGAL, ETSI1_WORLD, "PT"},
 	{CTRY_PUERTO_RICO, FCC1_FCCA, "PR"},
-	{CTRY_QATAR, NULL1_WORLD, "QA"},
+	{CTRY_QATAR, APL1_WORLD, "QA"},
 	{CTRY_ROMANIA, NULL1_WORLD, "RO"},
 	{CTRY_RUSSIA, NULL1_WORLD, "RU"},
 	{CTRY_SAUDI_ARABIA, NULL1_WORLD, "SA"},
@@ -445,7 +453,7 @@
 	{CTRY_SYRIA, NULL1_WORLD, "SY"},
 	{CTRY_TAIWAN, APL3_FCCA, "TW"},
 	{CTRY_THAILAND, FCC3_WORLD, "TH"},
-	{CTRY_TRINIDAD_Y_TOBAGO, ETSI4_WORLD, "TT"},
+	{CTRY_TRINIDAD_Y_TOBAGO, FCC3_WORLD, "TT"},
 	{CTRY_TUNISIA, ETSI3_WORLD, "TN"},
 	{CTRY_TURKEY, ETSI3_WORLD, "TR"},
 	{CTRY_UKRAINE, NULL1_WORLD, "UA"},
@@ -456,7 +464,7 @@
 	 * would need to assign new special alpha2 to CRDA db as with the world
 	 * regdomain and use another alpha2 */
 	{CTRY_UNITED_STATES_FCC49, FCC4_FCCA, "PS"},
-	{CTRY_URUGUAY, APL2_WORLD, "UY"},
+	{CTRY_URUGUAY, FCC3_WORLD, "UY"},
 	{CTRY_UZBEKISTAN, FCC3_FCCA, "UZ"},
 	{CTRY_VENEZUELA, APL2_ETSIC, "VE"},
 	{CTRY_VIET_NAM, NULL1_WORLD, "VN"},
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index cce1888..3edbbcf 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -99,6 +99,22 @@
 	{ ATMEL_FW_TYPE_506,		"atmel_at76c506",	"bin" },
 	{ ATMEL_FW_TYPE_NONE,		NULL,			NULL }
 };
+MODULE_FIRMWARE("atmel_at76c502-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502.bin");
+MODULE_FIRMWARE("atmel_at76c502d-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502d.bin");
+MODULE_FIRMWARE("atmel_at76c502e-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502e.bin");
+MODULE_FIRMWARE("atmel_at76c502_3com-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c502_3com.bin");
+MODULE_FIRMWARE("atmel_at76c504-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504.bin");
+MODULE_FIRMWARE("atmel_at76c504_2958-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504_2958.bin");
+MODULE_FIRMWARE("atmel_at76c504a_2958-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c504a_2958.bin");
+MODULE_FIRMWARE("atmel_at76c506-wpa.bin");
+MODULE_FIRMWARE("atmel_at76c506.bin");
 
 #define MAX_SSID_LENGTH 32
 #define MGMT_JIFFIES (256 * HZ / 100)
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index ddaa859..3240791 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -55,22 +55,6 @@
 
 #include "atmel.h"
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-static char *version = "$Revision: 1.2 $";
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -155,11 +139,10 @@
 {
 	local_info_t *local;
 
-	DEBUG(0, "atmel_attach()\n");
+	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
 	/* Interrupt setup */
 	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	p_dev->irq.Handler = NULL;
 
 	/*
@@ -194,7 +177,7 @@
 
 static void atmel_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "atmel_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "atmel_detach\n");
 
 	atmel_release(link);
 
@@ -209,9 +192,6 @@
 
   ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 /* Call-back function to interrogate PCMCIA-specific information
    about the current existance of the card */
 static int card_present(void *arg)
@@ -275,13 +255,13 @@
 static int atmel_config(struct pcmcia_device *link)
 {
 	local_info_t *dev;
-	int last_fn, last_ret;
+	int ret;
 	struct pcmcia_device_id *did;
 
 	dev = link->priv;
-	did = dev_get_drvdata(&handle_to_dev(link));
+	did = dev_get_drvdata(&link->dev);
 
-	DEBUG(0, "atmel_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "atmel_config\n");
 
 	/*
 	  In this loop, we scan the CIS for configuration table entries,
@@ -303,31 +283,36 @@
 	  handler to the interrupt, unless the 'Handler' member of the
 	  irq structure is initialized.
 	*/
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
+	}
 
 	/*
 	  This actually configures the PCMCIA socket -- setting up
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	if (link->irq.AssignedIRQ == 0) {
 		printk(KERN_ALERT
 		       "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
-		goto cs_failed;
+		goto failed;
 	}
 
 	((local_info_t*)link->priv)->eth_dev =
 		init_atmel_card(link->irq.AssignedIRQ,
 				link->io.BasePort1,
 				did ? did->driver_info : ATMEL_FW_TYPE_NONE,
-				&handle_to_dev(link),
+				&link->dev,
 				card_present,
 				link);
 	if (!((local_info_t*)link->priv)->eth_dev)
-			goto cs_failed;
+			goto failed;
 
 
 	/*
@@ -340,8 +325,6 @@
 
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
  failed:
 	atmel_release(link);
 	return -ENODEV;
@@ -359,7 +342,7 @@
 {
 	struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
 
-	DEBUG(0, "atmel_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "atmel_release\n");
 
 	if (dev)
 		stop_atmel_card(dev);
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 54ea61c..64c12e1 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -1,6 +1,6 @@
 config B43
 	tristate "Broadcom 43xx wireless support (mac80211 stack)"
-	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
+	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
 	---help---
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 6607162..fe3bf94 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -26,8 +26,6 @@
 # define B43_DEBUG	0
 #endif
 
-#define B43_RX_MAX_SSI			60
-
 /* MMIO offsets */
 #define B43_MMIO_DMA0_REASON		0x20
 #define B43_MMIO_DMA0_IRQ_MASK		0x24
@@ -749,12 +747,6 @@
 #endif
 };
 
-/*
- * Include goes here to avoid a dependency problem.
- * A better fix would be to integrate xmit.h into b43.h.
- */
-#include "xmit.h"
-
 /* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
 struct b43_wl {
 	/* Pointer to the active wireless device on this chip */
@@ -830,13 +822,9 @@
 	struct b43_leds leds;
 
 #ifdef CONFIG_B43_PIO
-	/*
-	 * RX/TX header/tail buffers used by the frame transmit functions.
-	 */
-	struct b43_rxhdr_fw4 rxhdr;
-	struct b43_txhdr txhdr;
-	u8 rx_tail[4];
-	u8 tx_tail[4];
+	/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
+	u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
+	u8 pio_tailspace[4] __attribute__((__aligned__(8)));
 #endif /* CONFIG_B43_PIO */
 };
 
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index de4e804..027be27 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -383,44 +383,160 @@
 	}
 }
 
+/* Check if a DMA region fits the device constraints.
+ * Returns true, if the region is OK for usage with this device. */
+static inline bool b43_dma_address_ok(struct b43_dmaring *ring,
+				      dma_addr_t addr, size_t size)
+{
+	switch (ring->type) {
+	case B43_DMA_30BIT:
+		if ((u64)addr + size > (1ULL << 30))
+			return 0;
+		break;
+	case B43_DMA_32BIT:
+		if ((u64)addr + size > (1ULL << 32))
+			return 0;
+		break;
+	case B43_DMA_64BIT:
+		/* Currently we can't have addresses beyond
+		 * 64bit in the kernel. */
+		break;
+	}
+	return 1;
+}
+
+#define is_4k_aligned(addr)	(((u64)(addr) & 0x0FFFull) == 0)
+#define is_8k_aligned(addr)	(((u64)(addr) & 0x1FFFull) == 0)
+
+static void b43_unmap_and_free_ringmem(struct b43_dmaring *ring, void *base,
+				       dma_addr_t dmaaddr, size_t size)
+{
+	ssb_dma_unmap_single(ring->dev->dev, dmaaddr, size, DMA_TO_DEVICE);
+	free_pages((unsigned long)base, get_order(size));
+}
+
+static void * __b43_get_and_map_ringmem(struct b43_dmaring *ring,
+					dma_addr_t *dmaaddr, size_t size,
+					gfp_t gfp_flags)
+{
+	void *base;
+
+	base = (void *)__get_free_pages(gfp_flags, get_order(size));
+	if (!base)
+		return NULL;
+	memset(base, 0, size);
+	*dmaaddr = ssb_dma_map_single(ring->dev->dev, base, size,
+				      DMA_TO_DEVICE);
+	if (ssb_dma_mapping_error(ring->dev->dev, *dmaaddr)) {
+		free_pages((unsigned long)base, get_order(size));
+		return NULL;
+	}
+
+	return base;
+}
+
+static void * b43_get_and_map_ringmem(struct b43_dmaring *ring,
+				      dma_addr_t *dmaaddr, size_t size)
+{
+	void *base;
+
+	base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
+					 GFP_KERNEL);
+	if (!base) {
+		b43err(ring->dev->wl, "Failed to allocate or map pages "
+		       "for DMA ringmemory\n");
+		return NULL;
+	}
+	if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
+		/* The memory does not fit our device constraints.
+		 * Retry with GFP_DMA set to get lower memory. */
+		b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
+		base = __b43_get_and_map_ringmem(ring, dmaaddr, size,
+						 GFP_KERNEL | GFP_DMA);
+		if (!base) {
+			b43err(ring->dev->wl, "Failed to allocate or map pages "
+			       "in the GFP_DMA region for DMA ringmemory\n");
+			return NULL;
+		}
+		if (!b43_dma_address_ok(ring, *dmaaddr, size)) {
+			b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
+			b43err(ring->dev->wl, "Failed to allocate DMA "
+			       "ringmemory that fits device constraints\n");
+			return NULL;
+		}
+	}
+	/* We expect the memory to be 4k aligned, at least. */
+	if (B43_WARN_ON(!is_4k_aligned(*dmaaddr))) {
+		b43_unmap_and_free_ringmem(ring, base, *dmaaddr, size);
+		return NULL;
+	}
+
+	return base;
+}
+
 static int alloc_ringmemory(struct b43_dmaring *ring)
 {
-	gfp_t flags = GFP_KERNEL;
+	unsigned int required;
+	void *base;
+	dma_addr_t dmaaddr;
 
-	/* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
-	 * alignment and 8K buffers for 64-bit DMA with 8K alignment. Testing
-	 * has shown that 4K is sufficient for the latter as long as the buffer
-	 * does not cross an 8K boundary.
-	 *
-	 * For unknown reasons - possibly a hardware error - the BCM4311 rev
-	 * 02, which uses 64-bit DMA, needs the ring buffer in very low memory,
-	 * which accounts for the GFP_DMA flag below.
-	 *
-	 * The flags here must match the flags in free_ringmemory below!
+	/* There are several requirements to the descriptor ring memory:
+	 * - The memory region needs to fit the address constraints for the
+	 *   device (same as for frame buffers).
+	 * - For 30/32bit DMA devices, the descriptor ring must be 4k aligned.
+	 * - For 64bit DMA devices, the descriptor ring must be 8k aligned.
 	 */
+
 	if (ring->type == B43_DMA_64BIT)
-		flags |= GFP_DMA;
-	ring->descbase = ssb_dma_alloc_consistent(ring->dev->dev,
-						  B43_DMA_RINGMEMSIZE,
-						  &(ring->dmabase), flags);
-	if (!ring->descbase) {
-		b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
+		required = ring->nr_slots * sizeof(struct b43_dmadesc64);
+	else
+		required = ring->nr_slots * sizeof(struct b43_dmadesc32);
+	if (B43_WARN_ON(required > 0x1000))
 		return -ENOMEM;
+
+	ring->alloc_descsize = 0x1000;
+	base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
+	if (!base)
+		return -ENOMEM;
+	ring->alloc_descbase = base;
+	ring->alloc_dmabase = dmaaddr;
+
+	if ((ring->type != B43_DMA_64BIT) || is_8k_aligned(dmaaddr)) {
+		/* We're on <=32bit DMA, or we already got 8k aligned memory.
+		 * That's all we need, so we're fine. */
+		ring->descbase = base;
+		ring->dmabase = dmaaddr;
+		return 0;
 	}
-	memset(ring->descbase, 0, B43_DMA_RINGMEMSIZE);
+	b43_unmap_and_free_ringmem(ring, base, dmaaddr, ring->alloc_descsize);
+
+	/* Ok, we failed at the 8k alignment requirement.
+	 * Try to force-align the memory region now. */
+	ring->alloc_descsize = 0x2000;
+	base = b43_get_and_map_ringmem(ring, &dmaaddr, ring->alloc_descsize);
+	if (!base)
+		return -ENOMEM;
+	ring->alloc_descbase = base;
+	ring->alloc_dmabase = dmaaddr;
+
+	if (is_8k_aligned(dmaaddr)) {
+		/* We're already 8k aligned. That Ok, too. */
+		ring->descbase = base;
+		ring->dmabase = dmaaddr;
+		return 0;
+	}
+	/* Force-align it to 8k */
+	ring->descbase = (void *)((u8 *)base + 0x1000);
+	ring->dmabase = dmaaddr + 0x1000;
+	B43_WARN_ON(!is_8k_aligned(ring->dmabase));
 
 	return 0;
 }
 
 static void free_ringmemory(struct b43_dmaring *ring)
 {
-	gfp_t flags = GFP_KERNEL;
-
-	if (ring->type == B43_DMA_64BIT)
-		flags |= GFP_DMA;
-
-	ssb_dma_free_consistent(ring->dev->dev, B43_DMA_RINGMEMSIZE,
-				ring->descbase, ring->dmabase, flags);
+	b43_unmap_and_free_ringmem(ring, ring->alloc_descbase,
+				   ring->alloc_dmabase, ring->alloc_descsize);
 }
 
 /* Reset the RX DMA channel */
@@ -530,29 +646,14 @@
 	if (unlikely(ssb_dma_mapping_error(ring->dev->dev, addr)))
 		return 1;
 
-	switch (ring->type) {
-	case B43_DMA_30BIT:
-		if ((u64)addr + buffersize > (1ULL << 30))
-			goto address_error;
-		break;
-	case B43_DMA_32BIT:
-		if ((u64)addr + buffersize > (1ULL << 32))
-			goto address_error;
-		break;
-	case B43_DMA_64BIT:
-		/* Currently we can't have addresses beyond
-		 * 64bit in the kernel. */
-		break;
+	if (!b43_dma_address_ok(ring, addr, buffersize)) {
+		/* We can't support this address. Unmap it again. */
+		unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+		return 1;
 	}
 
 	/* The address is OK. */
 	return 0;
-
-address_error:
-	/* We can't support this address. Unmap it again. */
-	unmap_descbuffer(ring, addr, buffersize, dma_to_device);
-
-	return 1;
 }
 
 static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
@@ -614,6 +715,9 @@
 	meta->dmaaddr = dmaaddr;
 	ring->ops->fill_descriptor(ring, desc, dmaaddr,
 				   ring->rx_buffersize, 0, 0, 0);
+	ssb_dma_sync_single_for_device(ring->dev->dev,
+				       ring->alloc_dmabase,
+				       ring->alloc_descsize, DMA_TO_DEVICE);
 
 	return 0;
 }
@@ -770,7 +874,7 @@
 	for (i = 0; i < ring->nr_slots; i++) {
 		desc = ring->ops->idx2desc(ring, i, &meta);
 
-		if (!meta->skb) {
+		if (!meta->skb || b43_dma_ptr_is_poisoned(meta->skb)) {
 			B43_WARN_ON(!ring->tx);
 			continue;
 		}
@@ -822,7 +926,7 @@
 				      enum b43_dmatype type)
 {
 	struct b43_dmaring *ring;
-	int err;
+	int i, err;
 	dma_addr_t dma_test;
 
 	ring = kzalloc(sizeof(*ring), GFP_KERNEL);
@@ -837,6 +941,8 @@
 			     GFP_KERNEL);
 	if (!ring->meta)
 		goto err_kfree_ring;
+	for (i = 0; i < ring->nr_slots; i++)
+		ring->meta->skb = B43_DMA_PTR_POISON;
 
 	ring->type = type;
 	ring->dev = dev;
@@ -1147,28 +1253,29 @@
 	case 0x5000:
 		ring = dma->tx_ring_mcast;
 		break;
-	default:
-		B43_WARN_ON(1);
 	}
 	*slot = (cookie & 0x0FFF);
-	B43_WARN_ON(!(ring && *slot >= 0 && *slot < ring->nr_slots));
+	if (unlikely(!ring || *slot < 0 || *slot >= ring->nr_slots)) {
+		b43dbg(dev->wl, "TX-status contains "
+		       "invalid cookie: 0x%04X\n", cookie);
+		return NULL;
+	}
 
 	return ring;
 }
 
 static int dma_tx_fragment(struct b43_dmaring *ring,
-			   struct sk_buff **in_skb)
+			   struct sk_buff *skb)
 {
-	struct sk_buff *skb = *in_skb;
 	const struct b43_dma_ops *ops = ring->ops;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct b43_private_tx_info *priv_info = b43_get_priv_tx_info(info);
 	u8 *header;
 	int slot, old_top_slot, old_used_slots;
 	int err;
 	struct b43_dmadesc_generic *desc;
 	struct b43_dmadesc_meta *meta;
 	struct b43_dmadesc_meta *meta_hdr;
-	struct sk_buff *bounce_skb;
 	u16 cookie;
 	size_t hdrsize = b43_txhdr_size(ring->dev);
 
@@ -1212,34 +1319,28 @@
 
 	meta->skb = skb;
 	meta->is_last_fragment = 1;
+	priv_info->bouncebuffer = NULL;
 
 	meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
 	/* create a bounce buffer in zone_dma on mapping failure. */
 	if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
-		bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
-		if (!bounce_skb) {
+		priv_info->bouncebuffer = kmalloc(skb->len, GFP_ATOMIC | GFP_DMA);
+		if (!priv_info->bouncebuffer) {
 			ring->current_slot = old_top_slot;
 			ring->used_slots = old_used_slots;
 			err = -ENOMEM;
 			goto out_unmap_hdr;
 		}
+		memcpy(priv_info->bouncebuffer, skb->data, skb->len);
 
-		memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
-		memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
-		bounce_skb->dev = skb->dev;
-		skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
-		info = IEEE80211_SKB_CB(bounce_skb);
-
-		dev_kfree_skb_any(skb);
-		skb = bounce_skb;
-		*in_skb = bounce_skb;
-		meta->skb = skb;
-		meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
+		meta->dmaaddr = map_descbuffer(ring, priv_info->bouncebuffer, skb->len, 1);
 		if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
+			kfree(priv_info->bouncebuffer);
+			priv_info->bouncebuffer = NULL;
 			ring->current_slot = old_top_slot;
 			ring->used_slots = old_used_slots;
 			err = -EIO;
-			goto out_free_bounce;
+			goto out_unmap_hdr;
 		}
 	}
 
@@ -1253,11 +1354,12 @@
 	}
 	/* Now transfer the whole frame. */
 	wmb();
+	ssb_dma_sync_single_for_device(ring->dev->dev,
+				       ring->alloc_dmabase,
+				       ring->alloc_descsize, DMA_TO_DEVICE);
 	ops->poke_tx(ring, next_slot(ring, slot));
 	return 0;
 
-out_free_bounce:
-	dev_kfree_skb_any(skb);
 out_unmap_hdr:
 	unmap_descbuffer(ring, meta_hdr->dmaaddr,
 			 hdrsize, 1);
@@ -1362,11 +1464,7 @@
 	 * static, so we don't need to store it per frame. */
 	ring->queue_prio = skb_get_queue_mapping(skb);
 
-	/* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
-	 * into the skb data or cb now. */
-	hdr = NULL;
-	info = NULL;
-	err = dma_tx_fragment(ring, &skb);
+	err = dma_tx_fragment(ring, skb);
 	if (unlikely(err == -ENOKEY)) {
 		/* Drop this packet, as we don't have the encryption key
 		 * anymore and must not transmit it unencrypted. */
@@ -1400,30 +1498,63 @@
 	struct b43_dmaring *ring;
 	struct b43_dmadesc_generic *desc;
 	struct b43_dmadesc_meta *meta;
-	int slot;
+	int slot, firstused;
 	bool frame_succeed;
 
 	ring = parse_cookie(dev, status->cookie, &slot);
 	if (unlikely(!ring))
 		return;
-
 	B43_WARN_ON(!ring->tx);
+
+	/* Sanity check: TX packets are processed in-order on one ring.
+	 * Check if the slot deduced from the cookie really is the first
+	 * used slot. */
+	firstused = ring->current_slot - ring->used_slots + 1;
+	if (firstused < 0)
+		firstused = ring->nr_slots + firstused;
+	if (unlikely(slot != firstused)) {
+		/* This possibly is a firmware bug and will result in
+		 * malfunction, memory leaks and/or stall of DMA functionality. */
+		b43dbg(dev->wl, "Out of order TX status report on DMA ring %d. "
+		       "Expected %d, but got %d\n",
+		       ring->index, firstused, slot);
+		return;
+	}
+
 	ops = ring->ops;
 	while (1) {
-		B43_WARN_ON(!(slot >= 0 && slot < ring->nr_slots));
+		B43_WARN_ON(slot < 0 || slot >= ring->nr_slots);
 		desc = ops->idx2desc(ring, slot, &meta);
 
-		if (meta->skb)
-			unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len,
-					 1);
-		else
+		if (b43_dma_ptr_is_poisoned(meta->skb)) {
+			b43dbg(dev->wl, "Poisoned TX slot %d (first=%d) "
+			       "on ring %d\n",
+			       slot, firstused, ring->index);
+			break;
+		}
+		if (meta->skb) {
+			struct b43_private_tx_info *priv_info =
+				b43_get_priv_tx_info(IEEE80211_SKB_CB(meta->skb));
+
+			unmap_descbuffer(ring, meta->dmaaddr, meta->skb->len, 1);
+			kfree(priv_info->bouncebuffer);
+			priv_info->bouncebuffer = NULL;
+		} else {
 			unmap_descbuffer(ring, meta->dmaaddr,
 					 b43_txhdr_size(dev), 1);
+		}
 
 		if (meta->is_last_fragment) {
 			struct ieee80211_tx_info *info;
 
-			BUG_ON(!meta->skb);
+			if (unlikely(!meta->skb)) {
+				/* This is a scatter-gather fragment of a frame, so
+				 * the skb pointer must not be NULL. */
+				b43dbg(dev->wl, "TX status unexpected NULL skb "
+				       "at slot %d (first=%d) on ring %d\n",
+				       slot, firstused, ring->index);
+				break;
+			}
 
 			info = IEEE80211_SKB_CB(meta->skb);
 
@@ -1441,20 +1572,29 @@
 #endif /* DEBUG */
 			ieee80211_tx_status(dev->wl->hw, meta->skb);
 
-			/* skb is freed by ieee80211_tx_status() */
-			meta->skb = NULL;
+			/* skb will be freed by ieee80211_tx_status().
+			 * Poison our pointer. */
+			meta->skb = B43_DMA_PTR_POISON;
 		} else {
 			/* No need to call free_descriptor_buffer here, as
 			 * this is only the txhdr, which is not allocated.
 			 */
-			B43_WARN_ON(meta->skb);
+			if (unlikely(meta->skb)) {
+				b43dbg(dev->wl, "TX status unexpected non-NULL skb "
+				       "at slot %d (first=%d) on ring %d\n",
+				       slot, firstused, ring->index);
+				break;
+			}
 		}
 
 		/* Everything unmapped and free'd. So it's not used anymore. */
 		ring->used_slots--;
 
-		if (meta->is_last_fragment)
+		if (meta->is_last_fragment) {
+			/* This is the last scatter-gather
+			 * fragment of the frame. We are done. */
 			break;
+		}
 		slot = next_slot(ring, slot);
 	}
 	if (ring->stopped) {
diff --git a/drivers/net/wireless/b43/dma.h b/drivers/net/wireless/b43/dma.h
index f0b0838..e607b39 100644
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -1,7 +1,7 @@
 #ifndef B43_DMA_H_
 #define B43_DMA_H_
 
-#include <linux/ieee80211.h>
+#include <linux/err.h>
 
 #include "b43.h"
 
@@ -157,7 +157,6 @@
 } __attribute__ ((__packed__));
 
 /* Misc DMA constants */
-#define B43_DMA_RINGMEMSIZE		PAGE_SIZE
 #define B43_DMA0_RX_FRAMEOFFSET		30
 
 /* DMA engine tuning knobs */
@@ -165,6 +164,10 @@
 #define B43_RXRING_SLOTS		64
 #define B43_DMA0_RX_BUFFERSIZE		IEEE80211_MAX_FRAME_LEN
 
+/* Pointer poison */
+#define B43_DMA_PTR_POISON		((void *)ERR_PTR(-ENOMEM))
+#define b43_dma_ptr_is_poisoned(ptr)	(unlikely((ptr) == B43_DMA_PTR_POISON))
+
 
 struct sk_buff;
 struct b43_private;
@@ -243,6 +246,12 @@
 	/* The QOS priority assigned to this ring. Only used for TX rings.
 	 * This is the mac80211 "queue" value. */
 	u8 queue_prio;
+	/* Pointers and size of the originally allocated and mapped memory
+	 * region for the descriptor ring. */
+	void *alloc_descbase;
+	dma_addr_t alloc_dmabase;
+	unsigned int alloc_descsize;
+	/* Pointer to our wireless device. */
 	struct b43_wldev *dev;
 #ifdef CONFIG_B43_DEBUG
 	/* Maximum number of used slots. */
diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index 1e8dba4..c587115 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -246,6 +246,7 @@
 			*behaviour = B43_LED_OFF;
 			break;
 		default:
+			*behaviour = B43_LED_OFF;
 			B43_WARN_ON(1);
 			return;
 		}
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 098dda1..077480c 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3573,7 +3573,7 @@
 	if (conf->channel->hw_value != phy->channel)
 		b43_switch_channel(dev, conf->channel->hw_value);
 
-	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
+	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
 
 	/* Adjust the desired TX power level. */
 	if (conf->power_level != 0) {
@@ -4669,7 +4669,7 @@
 {
 	struct b43_wl *wl = dev->wl;
 	struct ssb_bus *bus = dev->dev->bus;
-	struct pci_dev *pdev = bus->host_pci;
+	struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
 	int err;
 	bool have_2ghz_phy = 0, have_5ghz_phy = 0;
 	u32 tmp;
@@ -4802,7 +4802,7 @@
 
 	if (!list_empty(&wl->devlist)) {
 		/* We are not the first core on this chip. */
-		pdev = dev->bus->host_pci;
+		pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
 		/* Only special chips support more than one wireless
 		 * core, although some of the other chips have more than
 		 * one wireless core as well. Check for this and
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 6c3a749..984174b 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -65,35 +65,15 @@
 	struct ssb_bus *ssb;
 	win_req_t win;
 	memreq_t mem;
-	tuple_t tuple;
-	cisparse_t parse;
 	int err = -ENOMEM;
 	int res = 0;
-	unsigned char buf[64];
 
 	ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
 	if (!ssb)
 		goto out_error;
 
 	err = -ENODEV;
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
 
-	res = pcmcia_get_first_tuple(dev, &tuple);
-	if (res != 0)
-		goto err_kfree_ssb;
-	res = pcmcia_get_tuple_data(dev, &tuple);
-	if (res != 0)
-		goto err_kfree_ssb;
-	res = pcmcia_parse_tuple(&tuple, &parse);
-	if (res != 0)
-		goto err_kfree_ssb;
-
-	dev->conf.ConfigBase = parse.config.base;
-	dev->conf.Present = parse.config.rmask[0];
 	dev->conf.Attributes = CONF_ENABLE_IRQ;
 	dev->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -107,20 +87,18 @@
 	win.Base = 0;
 	win.Size = SSB_CORE_SIZE;
 	win.AccessSpeed = 250;
-	res = pcmcia_request_window(&dev, &win, &dev->win);
+	res = pcmcia_request_window(dev, &win, &dev->win);
 	if (res != 0)
 		goto err_kfree_ssb;
 
 	mem.CardOffset = 0;
 	mem.Page = 0;
-	res = pcmcia_map_mem_page(dev->win, &mem);
+	res = pcmcia_map_mem_page(dev, dev->win, &mem);
 	if (res != 0)
 		goto err_disable;
 
 	dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	dev->irq.Handler = NULL; /* The handler is registered later. */
-	dev->irq.Instance = NULL;
 	res = pcmcia_request_irq(dev, &dev->irq);
 	if (res != 0)
 		goto err_disable;
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 1e318d8..3e046ec 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -67,6 +67,7 @@
 	struct b43_phy_lp *lpphy = phy->lp;
 
 	memset(lpphy, 0, sizeof(*lpphy));
+	lpphy->antenna = B43_ANTENNA_DEFAULT;
 
 	//TODO
 }
@@ -751,11 +752,17 @@
 	}
 }
 
+static void lpphy_set_trsw_over(struct b43_wldev *dev, bool tx, bool rx)
+{
+	u16 trsw = (tx << 1) | rx;
+	b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, trsw);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+}
+
 static void lpphy_disable_crs(struct b43_wldev *dev, bool user)
 {
 	lpphy_set_deaf(dev, user);
-	b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x1);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+	lpphy_set_trsw_over(dev, false, true);
 	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFB);
 	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x4);
 	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFF7);
@@ -790,6 +797,60 @@
 
 struct lpphy_tx_gains { u16 gm, pga, pad, dac; };
 
+static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
+{
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF);
+	if (dev->phy.rev >= 2) {
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF);
+			b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7);
+		}
+	} else {
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
+	}
+}
+
+static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
+{
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
+	if (dev->phy.rev >= 2) {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400);
+			b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8);
+		}
+	} else {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200);
+	}
+}
+
+static void lpphy_disable_tx_gain_override(struct b43_wldev *dev)
+{
+	if (dev->phy.rev < 2)
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
+	else {
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F);
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF);
+	}
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF);
+}
+
+static void lpphy_enable_tx_gain_override(struct b43_wldev *dev)
+{
+	if (dev->phy.rev < 2)
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
+	else {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x80);
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x4000);
+	}
+	b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x40);
+}
+
 static struct lpphy_tx_gains lpphy_get_tx_gains(struct b43_wldev *dev)
 {
 	struct lpphy_tx_gains gains;
@@ -819,6 +880,17 @@
 	b43_phy_maskset(dev, B43_LPPHY_AFE_DAC_CTL, 0xF000, ctl);
 }
 
+static u16 lpphy_get_pa_gain(struct b43_wldev *dev)
+{
+	return b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x7F;
+}
+
+static void lpphy_set_pa_gain(struct b43_wldev *dev, u16 gain)
+{
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFB), 0xE03F, gain << 6);
+	b43_phy_maskset(dev, B43_PHY_OFDM(0xFD), 0x80FF, gain << 8);
+}
+
 static void lpphy_set_tx_gains(struct b43_wldev *dev,
 			       struct lpphy_tx_gains gains)
 {
@@ -829,25 +901,22 @@
 		b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
 				0xF800, rf_gain);
 	} else {
-		pa_gain = b43_phy_read(dev, B43_PHY_OFDM(0xFB)) & 0x1FC0;
-		pa_gain <<= 2;
+		pa_gain = lpphy_get_pa_gain(dev);
 		b43_phy_write(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
 			      (gains.pga << 8) | gains.gm);
+		/*
+		 * SPEC FIXME The spec calls for (pa_gain << 8) here, but that
+		 * conflicts with the spec for set_pa_gain! Vendor driver bug?
+		 */
 		b43_phy_maskset(dev, B43_PHY_OFDM(0xFB),
-				0x8000, gains.pad | pa_gain);
+				0x8000, gains.pad | (pa_gain << 6));
 		b43_phy_write(dev, B43_PHY_OFDM(0xFC),
 			      (gains.pga << 8) | gains.gm);
 		b43_phy_maskset(dev, B43_PHY_OFDM(0xFD),
-				0x8000, gains.pad | pa_gain);
+				0x8000, gains.pad | (pa_gain << 8));
 	}
 	lpphy_set_dac_gain(dev, gains.dac);
-	if (dev->phy.rev < 2) {
-		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF, 1 << 8);
-	} else {
-		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFF7F, 1 << 7);
-		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_2, 0xBFFF, 1 << 14);
-	}
-	b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFBF, 1 << 6);
+	lpphy_enable_tx_gain_override(dev);
 }
 
 static void lpphy_rev0_1_set_rx_gain(struct b43_wldev *dev, u32 gain)
@@ -887,38 +956,6 @@
 	}
 }
 
-static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
-{
-	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
-	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFEF);
-	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFBF);
-	if (dev->phy.rev >= 2) {
-		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFEFF);
-		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
-			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFBFF);
-			b43_phy_mask(dev, B43_PHY_OFDM(0xE5), 0xFFF7);
-		}
-	} else {
-		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
-	}
-}
-
-static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
-{
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x10);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x40);
-	if (dev->phy.rev >= 2) {
-		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x100);
-		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
-			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x400);
-			b43_phy_set(dev, B43_PHY_OFDM(0xE5), 0x8);
-		}
-	} else {
-		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x200);
-	}
-}
-
 static void lpphy_set_rx_gain(struct b43_wldev *dev, u32 gain)
 {
 	if (dev->phy.rev < 2)
@@ -1003,8 +1040,7 @@
 
 	memset(&iq_est, 0, sizeof(iq_est));
 
-	b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xFFFC, 0x3);
-	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x3);
+	lpphy_set_trsw_over(dev, true, true);
 	b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 1);
 	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE);
 	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800);
@@ -1126,7 +1162,7 @@
 			b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM,
 					0x8FFF, ((u16)lpphy->tssi_npt << 16));
 			//TODO Set "TSSI Transmit Count" variable to total transmitted frame count
-			//TODO Disable TX gain override
+			lpphy_disable_tx_gain_override(dev);
 			lpphy->tx_pwr_idx_over = -1;
 		}
 	}
@@ -1312,15 +1348,73 @@
 	}
 }
 
+static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
+{
+	if (dev->phy.rev >= 2)
+		return; // rev2+ doesn't support antenna diversity
+
+	if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1))
+		return;
+
+	b43_hf_write(dev, b43_hf_read(dev) & ~B43_HF_ANTDIVHELP);
+
+	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2);
+	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1);
+
+	b43_hf_write(dev, b43_hf_read(dev) | B43_HF_ANTDIVHELP);
+
+	dev->phy.lp->antenna = antenna;
+}
+
+static void lpphy_set_tx_iqcc(struct b43_wldev *dev, u16 a, u16 b)
+{
+	u16 tmp[2];
+
+	tmp[0] = a;
+	tmp[1] = b;
+	b43_lptab_write_bulk(dev, B43_LPTAB16(0, 80), 2, tmp);
+}
+
 static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
+	struct lpphy_tx_gains gains;
+	u32 iq_comp, tx_gain, coeff, rf_power;
 
 	lpphy->tx_pwr_idx_over = index;
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
 	if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF)
 		lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW);
-
-	//TODO
+	if (dev->phy.rev >= 2) {
+		iq_comp = b43_lptab_read(dev, B43_LPTAB32(7, index + 320));
+		tx_gain = b43_lptab_read(dev, B43_LPTAB32(7, index + 192));
+		gains.pad = (tx_gain >> 16) & 0xFF;
+		gains.gm = tx_gain & 0xFF;
+		gains.pga = (tx_gain >> 8) & 0xFF;
+		gains.dac = (iq_comp >> 28) & 0xFF;
+		lpphy_set_tx_gains(dev, gains);
+	} else {
+		iq_comp = b43_lptab_read(dev, B43_LPTAB32(10, index + 320));
+		tx_gain = b43_lptab_read(dev, B43_LPTAB32(10, index + 192));
+		b43_phy_maskset(dev, B43_LPPHY_TX_GAIN_CTL_OVERRIDE_VAL,
+				0xF800, (tx_gain >> 4) & 0x7FFF);
+		lpphy_set_dac_gain(dev, tx_gain & 0x7);
+		lpphy_set_pa_gain(dev, (tx_gain >> 24) & 0x7F);
+	}
+	lpphy_set_bb_mult(dev, (iq_comp >> 20) & 0xFF);
+	lpphy_set_tx_iqcc(dev, (iq_comp >> 10) & 0x3FF, iq_comp & 0x3FF);
+	if (dev->phy.rev >= 2) {
+		coeff = b43_lptab_read(dev, B43_LPTAB32(7, index + 448));
+	} else {
+		coeff = b43_lptab_read(dev, B43_LPTAB32(10, index + 448));
+	}
+	b43_lptab_write(dev, B43_LPTAB16(0, 85), coeff & 0xFFFF);
+	if (dev->phy.rev >= 2) {
+		rf_power = b43_lptab_read(dev, B43_LPTAB32(7, index + 576));
+		b43_phy_maskset(dev, B43_LPPHY_RF_PWR_OVERRIDE, 0xFF00,
+				rf_power & 0xFFFF);//SPEC FIXME mask & set != 0
+	}
+	lpphy_enable_tx_gain_override(dev);
 }
 
 static void lpphy_btcoex_override(struct b43_wldev *dev)
@@ -1329,58 +1423,45 @@
 	b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF);
 }
 
-static void lpphy_pr41573_workaround(struct b43_wldev *dev)
+static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
+					 bool blocked)
 {
-	struct b43_phy_lp *lpphy = dev->phy.lp;
-	u32 *saved_tab;
-	const unsigned int saved_tab_size = 256;
-	enum b43_lpphy_txpctl_mode txpctl_mode;
-	s8 tx_pwr_idx_over;
-	u16 tssi_npt, tssi_idx;
-
-	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
-	if (!saved_tab) {
-		b43err(dev->wl, "PR41573 failed. Out of memory!\n");
-		return;
-	}
-
-	lpphy_read_tx_pctl_mode_from_hardware(dev);
-	txpctl_mode = lpphy->txpctl_mode;
-	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
-	tssi_npt = lpphy->tssi_npt;
-	tssi_idx = lpphy->tssi_idx;
-
-	if (dev->phy.rev < 2) {
-		b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
-				    saved_tab_size, saved_tab);
+	//TODO check MAC control register
+	if (blocked) {
+		if (dev->phy.rev >= 2) {
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x83FF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1F00);
+			b43_phy_mask(dev, B43_LPPHY_AFE_DDFS, 0x80FF);
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xDFFF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x0808);
+		} else {
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xE0FF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x1F00);
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2_VAL, 0xFCFF);
+			b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_2, 0x0018);
+		}
 	} else {
-		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
-				    saved_tab_size, saved_tab);
+		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xE0FF);
+		if (dev->phy.rev >= 2)
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xF7F7);
+		else
+			b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFFE7);
 	}
-	//TODO
-
-	kfree(saved_tab);
 }
 
-static void lpphy_calibration(struct b43_wldev *dev)
+/* This was previously called lpphy_japan_filter */
+static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel)
 {
 	struct b43_phy_lp *lpphy = dev->phy.lp;
-	enum b43_lpphy_txpctl_mode saved_pctl_mode;
+	u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter!
 
-	b43_mac_suspend(dev);
-
-	lpphy_btcoex_override(dev);
-	lpphy_read_tx_pctl_mode_from_hardware(dev);
-	saved_pctl_mode = lpphy->txpctl_mode;
-	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
-	//TODO Perform transmit power table I/Q LO calibration
-	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
-		lpphy_pr41573_workaround(dev);
-	//TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration
-	lpphy_set_tx_power_control(dev, saved_pctl_mode);
-	//TODO Perform I/Q calibration with a single control value set
-
-	b43_mac_enable(dev);
+	if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific?
+		b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9);
+		if ((dev->phy.rev == 1) && (lpphy->rc_cap))
+			lpphy_set_rc_cap(dev);
+	} else {
+		b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F);
+	}
 }
 
 static void lpphy_set_tssi_mux(struct b43_wldev *dev, enum tssi_mux_mode mode)
@@ -1489,6 +1570,473 @@
 	}
 }
 
+static void lpphy_pr41573_workaround(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	u32 *saved_tab;
+	const unsigned int saved_tab_size = 256;
+	enum b43_lpphy_txpctl_mode txpctl_mode;
+	s8 tx_pwr_idx_over;
+	u16 tssi_npt, tssi_idx;
+
+	saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL);
+	if (!saved_tab) {
+		b43err(dev->wl, "PR41573 failed. Out of memory!\n");
+		return;
+	}
+
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
+	txpctl_mode = lpphy->txpctl_mode;
+	tx_pwr_idx_over = lpphy->tx_pwr_idx_over;
+	tssi_npt = lpphy->tssi_npt;
+	tssi_idx = lpphy->tssi_idx;
+
+	if (dev->phy.rev < 2) {
+		b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140),
+				    saved_tab_size, saved_tab);
+	} else {
+		b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140),
+				    saved_tab_size, saved_tab);
+	}
+	//FIXME PHY reset
+	lpphy_table_init(dev); //FIXME is table init needed?
+	lpphy_baseband_init(dev);
+	lpphy_tx_pctl_init(dev);
+	b43_lpphy_op_software_rfkill(dev, false);
+	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+	if (dev->phy.rev < 2) {
+		b43_lptab_write_bulk(dev, B43_LPTAB32(10, 0x140),
+				     saved_tab_size, saved_tab);
+	} else {
+		b43_lptab_write_bulk(dev, B43_LPTAB32(7, 0x140),
+				     saved_tab_size, saved_tab);
+	}
+	b43_write16(dev, B43_MMIO_CHANNEL, lpphy->channel);
+	lpphy->tssi_npt = tssi_npt;
+	lpphy->tssi_idx = tssi_idx;
+	lpphy_set_analog_filter(dev, lpphy->channel);
+	if (tx_pwr_idx_over != -1)
+		lpphy_set_tx_power_by_index(dev, tx_pwr_idx_over);
+	if (lpphy->rc_cap)
+		lpphy_set_rc_cap(dev);
+	b43_lpphy_op_set_rx_antenna(dev, lpphy->antenna);
+	lpphy_set_tx_power_control(dev, txpctl_mode);
+	kfree(saved_tab);
+}
+
+struct lpphy_rx_iq_comp { u8 chan; s8 c1, c0; };
+
+static const struct lpphy_rx_iq_comp lpphy_5354_iq_table[] = {
+	{ .chan = 1, .c1 = -66, .c0 = 15, },
+	{ .chan = 2, .c1 = -66, .c0 = 15, },
+	{ .chan = 3, .c1 = -66, .c0 = 15, },
+	{ .chan = 4, .c1 = -66, .c0 = 15, },
+	{ .chan = 5, .c1 = -66, .c0 = 15, },
+	{ .chan = 6, .c1 = -66, .c0 = 15, },
+	{ .chan = 7, .c1 = -66, .c0 = 14, },
+	{ .chan = 8, .c1 = -66, .c0 = 14, },
+	{ .chan = 9, .c1 = -66, .c0 = 14, },
+	{ .chan = 10, .c1 = -66, .c0 = 14, },
+	{ .chan = 11, .c1 = -66, .c0 = 14, },
+	{ .chan = 12, .c1 = -66, .c0 = 13, },
+	{ .chan = 13, .c1 = -66, .c0 = 13, },
+	{ .chan = 14, .c1 = -66, .c0 = 13, },
+};
+
+static const struct lpphy_rx_iq_comp lpphy_rev0_1_iq_table[] = {
+	{ .chan = 1, .c1 = -64, .c0 = 13, },
+	{ .chan = 2, .c1 = -64, .c0 = 13, },
+	{ .chan = 3, .c1 = -64, .c0 = 13, },
+	{ .chan = 4, .c1 = -64, .c0 = 13, },
+	{ .chan = 5, .c1 = -64, .c0 = 12, },
+	{ .chan = 6, .c1 = -64, .c0 = 12, },
+	{ .chan = 7, .c1 = -64, .c0 = 12, },
+	{ .chan = 8, .c1 = -64, .c0 = 12, },
+	{ .chan = 9, .c1 = -64, .c0 = 12, },
+	{ .chan = 10, .c1 = -64, .c0 = 11, },
+	{ .chan = 11, .c1 = -64, .c0 = 11, },
+	{ .chan = 12, .c1 = -64, .c0 = 11, },
+	{ .chan = 13, .c1 = -64, .c0 = 11, },
+	{ .chan = 14, .c1 = -64, .c0 = 10, },
+	{ .chan = 34, .c1 = -62, .c0 = 24, },
+	{ .chan = 38, .c1 = -62, .c0 = 24, },
+	{ .chan = 42, .c1 = -62, .c0 = 24, },
+	{ .chan = 46, .c1 = -62, .c0 = 23, },
+	{ .chan = 36, .c1 = -62, .c0 = 24, },
+	{ .chan = 40, .c1 = -62, .c0 = 24, },
+	{ .chan = 44, .c1 = -62, .c0 = 23, },
+	{ .chan = 48, .c1 = -62, .c0 = 23, },
+	{ .chan = 52, .c1 = -62, .c0 = 23, },
+	{ .chan = 56, .c1 = -62, .c0 = 22, },
+	{ .chan = 60, .c1 = -62, .c0 = 22, },
+	{ .chan = 64, .c1 = -62, .c0 = 22, },
+	{ .chan = 100, .c1 = -62, .c0 = 16, },
+	{ .chan = 104, .c1 = -62, .c0 = 16, },
+	{ .chan = 108, .c1 = -62, .c0 = 15, },
+	{ .chan = 112, .c1 = -62, .c0 = 14, },
+	{ .chan = 116, .c1 = -62, .c0 = 14, },
+	{ .chan = 120, .c1 = -62, .c0 = 13, },
+	{ .chan = 124, .c1 = -62, .c0 = 12, },
+	{ .chan = 128, .c1 = -62, .c0 = 12, },
+	{ .chan = 132, .c1 = -62, .c0 = 12, },
+	{ .chan = 136, .c1 = -62, .c0 = 11, },
+	{ .chan = 140, .c1 = -62, .c0 = 10, },
+	{ .chan = 149, .c1 = -61, .c0 = 9, },
+	{ .chan = 153, .c1 = -61, .c0 = 9, },
+	{ .chan = 157, .c1 = -61, .c0 = 9, },
+	{ .chan = 161, .c1 = -61, .c0 = 8, },
+	{ .chan = 165, .c1 = -61, .c0 = 8, },
+	{ .chan = 184, .c1 = -62, .c0 = 25, },
+	{ .chan = 188, .c1 = -62, .c0 = 25, },
+	{ .chan = 192, .c1 = -62, .c0 = 25, },
+	{ .chan = 196, .c1 = -62, .c0 = 25, },
+	{ .chan = 200, .c1 = -62, .c0 = 25, },
+	{ .chan = 204, .c1 = -62, .c0 = 25, },
+	{ .chan = 208, .c1 = -62, .c0 = 25, },
+	{ .chan = 212, .c1 = -62, .c0 = 25, },
+	{ .chan = 216, .c1 = -62, .c0 = 26, },
+};
+
+static const struct lpphy_rx_iq_comp lpphy_rev2plus_iq_comp = {
+	.chan = 0,
+	.c1 = -64,
+	.c0 = 0,
+};
+
+static u8 lpphy_nbits(s32 val)
+{
+	u32 tmp = abs(val);
+	u8 nbits = 0;
+
+	while (tmp != 0) {
+		nbits++;
+		tmp >>= 1;
+	}
+
+	return nbits;
+}
+
+static int lpphy_calc_rx_iq_comp(struct b43_wldev *dev, u16 samples)
+{
+	struct lpphy_iq_est iq_est;
+	u16 c0, c1;
+	int prod, ipwr, qpwr, prod_msb, q_msb, tmp1, tmp2, tmp3, tmp4, ret;
+
+	c1 = b43_phy_read(dev, B43_LPPHY_RX_COMP_COEFF_S);
+	c0 = c1 >> 8;
+	c1 |= 0xFF;
+
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, 0x00C0);
+	b43_phy_mask(dev, B43_LPPHY_RX_COMP_COEFF_S, 0x00FF);
+
+	ret = lpphy_rx_iq_est(dev, samples, 32, &iq_est);
+	if (!ret)
+		goto out;
+
+	prod = iq_est.iq_prod;
+	ipwr = iq_est.i_pwr;
+	qpwr = iq_est.q_pwr;
+
+	if (ipwr + qpwr < 2) {
+		ret = 0;
+		goto out;
+	}
+
+	prod_msb = lpphy_nbits(prod);
+	q_msb = lpphy_nbits(qpwr);
+	tmp1 = prod_msb - 20;
+
+	if (tmp1 >= 0) {
+		tmp3 = ((prod << (30 - prod_msb)) + (ipwr >> (1 + tmp1))) /
+			(ipwr >> tmp1);
+	} else {
+		tmp3 = ((prod << (30 - prod_msb)) + (ipwr << (-1 - tmp1))) /
+			(ipwr << -tmp1);
+	}
+
+	tmp2 = q_msb - 11;
+
+	if (tmp2 >= 0)
+		tmp4 = (qpwr << (31 - q_msb)) / (ipwr >> tmp2);
+	else
+		tmp4 = (qpwr << (31 - q_msb)) / (ipwr << -tmp2);
+
+	tmp4 -= tmp3 * tmp3;
+	tmp4 = -int_sqrt(tmp4);
+
+	c0 = tmp3 >> 3;
+	c1 = tmp4 >> 4;
+
+out:
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, c1);
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0x00FF, c0 << 8);
+	return ret;
+}
+
+/* Complex number using 2 32-bit signed integers */
+typedef struct {s32 i, q;} lpphy_c32;
+
+static lpphy_c32 lpphy_cordic(int theta)
+{
+	u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
+		      58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
+		      229, 115, 57, 29, };
+	int i, tmp, signx = 1, angle = 0;
+	lpphy_c32 ret = { .i = 39797, .q = 0, };
+
+	theta = clamp_t(int, theta, -180, 180);
+
+	if (theta > 90) {
+		theta -= 180;
+		signx = -1;
+	} else if (theta < -90) {
+		theta += 180;
+		signx = -1;
+	}
+
+	for (i = 0; i <= 17; i++) {
+		if (theta > angle) {
+			tmp = ret.i - (ret.q >> i);
+			ret.q += ret.i >> i;
+			ret.i = tmp;
+			angle += arctg[i];
+		} else {
+			tmp = ret.i + (ret.q >> i);
+			ret.q -= ret.i >> i;
+			ret.i = tmp;
+			angle -= arctg[i];
+		}
+	}
+
+	ret.i *= signx;
+	ret.q *= signx;
+
+	return ret;
+}
+
+static void lpphy_run_samples(struct b43_wldev *dev, u16 samples, u16 loops,
+			      u16 wait)
+{
+	b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_BUFFER_CTL,
+			0xFFC0, samples - 1);
+	if (loops != 0xFFFF)
+		loops--;
+	b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_COUNT, 0xF000, loops);
+	b43_phy_maskset(dev, B43_LPPHY_SMPL_PLAY_BUFFER_CTL, 0x3F, wait << 6);
+	b43_phy_set(dev, B43_LPPHY_A_PHY_CTL_ADDR, 0x1);
+}
+
+//SPEC FIXME what does a negative freq mean?
+static void lpphy_start_tx_tone(struct b43_wldev *dev, s32 freq, u16 max)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	u16 buf[64];
+	int i, samples = 0, angle = 0, rotation = (9 * freq) / 500;
+	lpphy_c32 sample;
+
+	lpphy->tx_tone_freq = freq;
+
+	if (freq) {
+		/* Find i for which abs(freq) integrally divides 20000 * i */
+		for (i = 1; samples * abs(freq) != 20000 * i; i++) {
+			samples = (20000 * i) / abs(freq);
+			if(B43_WARN_ON(samples > 63))
+				return;
+		}
+	} else {
+		samples = 2;
+	}
+
+	for (i = 0; i < samples; i++) {
+		sample = lpphy_cordic(angle);
+		angle += rotation;
+		buf[i] = ((sample.i * max) & 0xFF) << 8;
+		buf[i] |= (sample.q * max) & 0xFF;
+	}
+
+	b43_lptab_write_bulk(dev, B43_LPTAB16(5, 0), samples, buf);
+
+	lpphy_run_samples(dev, samples, 0xFFFF, 0);
+}
+
+static void lpphy_stop_tx_tone(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	int i;
+
+	lpphy->tx_tone_freq = 0;
+
+	b43_phy_mask(dev, B43_LPPHY_SMPL_PLAY_COUNT, 0xF000);
+	for (i = 0; i < 31; i++) {
+		if (!(b43_phy_read(dev, B43_LPPHY_A_PHY_CTL_ADDR) & 0x1))
+			break;
+		udelay(100);
+	}
+}
+
+
+static void lpphy_papd_cal(struct b43_wldev *dev, struct lpphy_tx_gains gains,
+			   int mode, bool useindex, u8 index)
+{
+	//TODO
+}
+
+static void lpphy_papd_cal_txpwr(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	struct ssb_bus *bus = dev->dev->bus;
+	struct lpphy_tx_gains gains, oldgains;
+	int old_txpctl, old_afe_ovr, old_rf, old_bbmult;
+
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
+	old_txpctl = lpphy->txpctl_mode;
+	old_afe_ovr = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40;
+	if (old_afe_ovr)
+		oldgains = lpphy_get_tx_gains(dev);
+	old_rf = b43_phy_read(dev, B43_LPPHY_RF_PWR_OVERRIDE) & 0xFF;
+	old_bbmult = lpphy_get_bb_mult(dev);
+
+	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+
+	if (bus->chip_id == 0x4325 && bus->chip_rev == 0)
+		lpphy_papd_cal(dev, gains, 0, 1, 30);
+	else
+		lpphy_papd_cal(dev, gains, 0, 1, 65);
+
+	if (old_afe_ovr)
+		lpphy_set_tx_gains(dev, oldgains);
+	lpphy_set_bb_mult(dev, old_bbmult);
+	lpphy_set_tx_power_control(dev, old_txpctl);
+	b43_phy_maskset(dev, B43_LPPHY_RF_PWR_OVERRIDE, 0xFF00, old_rf);
+}
+
+static int lpphy_rx_iq_cal(struct b43_wldev *dev, bool noise, bool tx,
+			    bool rx, bool pa, struct lpphy_tx_gains *gains)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	struct ssb_bus *bus = dev->dev->bus;
+	const struct lpphy_rx_iq_comp *iqcomp = NULL;
+	struct lpphy_tx_gains nogains, oldgains;
+	u16 tmp;
+	int i, ret;
+
+	memset(&nogains, 0, sizeof(nogains));
+	memset(&oldgains, 0, sizeof(oldgains));
+
+	if (bus->chip_id == 0x5354) {
+		for (i = 0; i < ARRAY_SIZE(lpphy_5354_iq_table); i++) {
+			if (lpphy_5354_iq_table[i].chan == lpphy->channel) {
+				iqcomp = &lpphy_5354_iq_table[i];
+			}
+		}
+	} else if (dev->phy.rev >= 2) {
+		iqcomp = &lpphy_rev2plus_iq_comp;
+	} else {
+		for (i = 0; i < ARRAY_SIZE(lpphy_rev0_1_iq_table); i++) {
+			if (lpphy_rev0_1_iq_table[i].chan == lpphy->channel) {
+				iqcomp = &lpphy_rev0_1_iq_table[i];
+			}
+		}
+	}
+
+	if (B43_WARN_ON(!iqcomp))
+		return 0;
+
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S, 0xFF00, iqcomp->c1);
+	b43_phy_maskset(dev, B43_LPPHY_RX_COMP_COEFF_S,
+			0x00FF, iqcomp->c0 << 8);
+
+	if (noise) {
+		tx = true;
+		rx = false;
+		pa = false;
+	}
+
+	lpphy_set_trsw_over(dev, tx, rx);
+
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x8);
+		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0,
+				0xFFF7, pa << 3);
+	} else {
+		b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x20);
+		b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_VAL_0,
+				0xFFDF, pa << 5);
+	}
+
+	tmp = b43_phy_read(dev, B43_LPPHY_AFE_CTL_OVR) & 0x40;
+
+	if (noise)
+		lpphy_set_rx_gain(dev, 0x2D5D);
+	else {
+		if (tmp)
+			oldgains = lpphy_get_tx_gains(dev);
+		if (!gains)
+			gains = &nogains;
+		lpphy_set_tx_gains(dev, *gains);
+	}
+
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFFE);
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFFE);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_0, 0x800);
+	b43_phy_set(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0x800);
+	lpphy_set_deaf(dev, false);
+	if (noise)
+		ret = lpphy_calc_rx_iq_comp(dev, 0xFFF0);
+	else {
+		lpphy_start_tx_tone(dev, 4000, 100);
+		ret = lpphy_calc_rx_iq_comp(dev, 0x4000);
+		lpphy_stop_tx_tone(dev);
+	}
+	lpphy_clear_deaf(dev, false);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFC);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFF7);
+	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFDF);
+	if (!noise) {
+		if (tmp)
+			lpphy_set_tx_gains(dev, oldgains);
+		else
+			lpphy_disable_tx_gain_override(dev);
+	}
+	lpphy_disable_rx_gain_override(dev);
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xFFFE);
+	b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xF7FF);
+	return ret;
+}
+
+static void lpphy_calibration(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+	enum b43_lpphy_txpctl_mode saved_pctl_mode;
+	bool full_cal = false;
+
+	if (lpphy->full_calib_chan != lpphy->channel) {
+		full_cal = true;
+		lpphy->full_calib_chan = lpphy->channel;
+	}
+
+	b43_mac_suspend(dev);
+
+	lpphy_btcoex_override(dev);
+	if (dev->phy.rev >= 2)
+		lpphy_save_dig_flt_state(dev);
+	lpphy_read_tx_pctl_mode_from_hardware(dev);
+	saved_pctl_mode = lpphy->txpctl_mode;
+	lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF);
+	//TODO Perform transmit power table I/Q LO calibration
+	if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF))
+		lpphy_pr41573_workaround(dev);
+	if ((dev->phy.rev >= 2) && full_cal) {
+		lpphy_papd_cal_txpwr(dev);
+	}
+	lpphy_set_tx_power_control(dev, saved_pctl_mode);
+	if (dev->phy.rev >= 2)
+		lpphy_restore_dig_flt_state(dev);
+	lpphy_rx_iq_cal(dev, true, true, false, false, NULL);
+
+	b43_mac_enable(dev);
+}
+
 static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
 {
 	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
@@ -1533,12 +2081,6 @@
 	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
 }
 
-static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
-					 bool blocked)
-{
-	//TODO
-}
-
 struct b206x_channel {
 	u8 channel;
 	u16 freq;
@@ -2004,22 +2546,6 @@
 	return err;
 }
 
-
-/* This was previously called lpphy_japan_filter */
-static void lpphy_set_analog_filter(struct b43_wldev *dev, int channel)
-{
-	struct b43_phy_lp *lpphy = dev->phy.lp;
-	u16 tmp = (channel == 14); //SPEC FIXME check japanwidefilter!
-
-	if (dev->phy.rev < 2) { //SPEC FIXME Isn't this rev0/1-specific?
-		b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xFCFF, tmp << 9);
-		if ((dev->phy.rev == 1) && (lpphy->rc_cap))
-			lpphy_set_rc_cap(dev);
-	} else {
-		b43_radio_write(dev, B2063_TX_BB_SP3, 0x3F);
-	}
-}
-
 static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
 {
 	u16 tmp;
@@ -2204,18 +2730,6 @@
 	return 0;
 }
 
-static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
-{
-	if (dev->phy.rev >= 2)
-		return; // rev2+ doesn't support antenna diversity
-
-	if (B43_WARN_ON(antenna > B43_ANTENNA_AUTO1))
-		return;
-
-	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFD, antenna & 0x2);
-	b43_phy_maskset(dev, B43_LPPHY_CRSGAIN_CTL, 0xFFFE, antenna & 0x1);
-}
-
 static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
 {
 	//TODO
@@ -2238,6 +2752,11 @@
        }
 }
 
+static void b43_lpphy_op_pwork_15sec(struct b43_wldev *dev)
+{
+	//TODO
+}
+
 const struct b43_phy_operations b43_phyops_lp = {
 	.allocate		= b43_lpphy_op_allocate,
 	.free			= b43_lpphy_op_free,
@@ -2255,4 +2774,6 @@
 	.set_rx_antenna		= b43_lpphy_op_set_rx_antenna,
 	.recalc_txpower		= b43_lpphy_op_recalc_txpower,
 	.adjust_txpower		= b43_lpphy_op_adjust_txpower,
+	.pwork_15sec		= b43_lpphy_op_pwork_15sec,
+	.pwork_60sec		= lpphy_calibration,
 };
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index c3232c1..62737f7 100644
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -286,6 +286,7 @@
 #define B43_LPPHY_TR_LOOKUP_6			B43_PHY_OFDM(0xC8) /* TR Lookup 6 */
 #define B43_LPPHY_TR_LOOKUP_7			B43_PHY_OFDM(0xC9) /* TR Lookup 7 */
 #define B43_LPPHY_TR_LOOKUP_8			B43_PHY_OFDM(0xCA) /* TR Lookup 8 */
+#define B43_LPPHY_RF_PWR_OVERRIDE		B43_PHY_OFDM(0xD3) /* RF power override */
 
 
 
@@ -871,12 +872,12 @@
 	u8 rssi_gs;
 
 	/* RC cap */
-	u8 rc_cap; /* FIXME initial value? */
+	u8 rc_cap;
 	/* BX arch */
 	u8 bx_arch;
 
 	/* Full calibration channel */
-	u8 full_calib_chan; /* FIXME initial value? */
+	u8 full_calib_chan;
 
 	/* Transmit iqlocal best coeffs */
 	bool tx_iqloc_best_coeffs_valid;
@@ -891,6 +892,12 @@
 
 	/* The channel we are tuned to */
 	u8 channel;
+
+	/* The active antenna diversity mode */
+	int antenna;
+
+	/* Frequency of the active TX tone */
+	int tx_tone_freq;
 };
 
 enum tssi_mux_mode {
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 9b90444..c01b8e0 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -342,12 +342,15 @@
 			q->mmio_base + B43_PIO_TXDATA,
 			sizeof(u16));
 	if (data_len & 1) {
+		u8 *tail = wl->pio_tailspace;
+		BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 2);
+
 		/* Write the last byte. */
 		ctl &= ~B43_PIO_TXCTL_WRITEHI;
 		b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
-		wl->tx_tail[0] = data[data_len - 1];
-		wl->tx_tail[1] = 0;
-		ssb_block_write(dev->dev, wl->tx_tail, 2,
+		tail[0] = data[data_len - 1];
+		tail[1] = 0;
+		ssb_block_write(dev->dev, tail, 2,
 				q->mmio_base + B43_PIO_TXDATA,
 				sizeof(u16));
 	}
@@ -393,31 +396,31 @@
 			q->mmio_base + B43_PIO8_TXDATA,
 			sizeof(u32));
 	if (data_len & 3) {
-		wl->tx_tail[3] = 0;
+		u8 *tail = wl->pio_tailspace;
+		BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 4);
+
+		memset(tail, 0, 4);
 		/* Write the last few bytes. */
 		ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
 			 B43_PIO8_TXCTL_24_31);
 		switch (data_len & 3) {
 		case 3:
 			ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
-			wl->tx_tail[0] = data[data_len - 3];
-			wl->tx_tail[1] = data[data_len - 2];
-			wl->tx_tail[2] = data[data_len - 1];
+			tail[0] = data[data_len - 3];
+			tail[1] = data[data_len - 2];
+			tail[2] = data[data_len - 1];
 			break;
 		case 2:
 			ctl |= B43_PIO8_TXCTL_8_15;
-			wl->tx_tail[0] = data[data_len - 2];
-			wl->tx_tail[1] = data[data_len - 1];
-			wl->tx_tail[2] = 0;
+			tail[0] = data[data_len - 2];
+			tail[1] = data[data_len - 1];
 			break;
 		case 1:
-			wl->tx_tail[0] = data[data_len - 1];
-			wl->tx_tail[1] = 0;
-			wl->tx_tail[2] = 0;
+			tail[0] = data[data_len - 1];
 			break;
 		}
 		b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
-		ssb_block_write(dev->dev, wl->tx_tail, 4,
+		ssb_block_write(dev->dev, tail, 4,
 				q->mmio_base + B43_PIO8_TXDATA,
 				sizeof(u32));
 	}
@@ -456,6 +459,7 @@
 	int err;
 	unsigned int hdrlen;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct b43_txhdr *txhdr = (struct b43_txhdr *)wl->pio_scratchspace;
 
 	B43_WARN_ON(list_empty(&q->packets_list));
 	pack = list_entry(q->packets_list.next,
@@ -463,7 +467,9 @@
 
 	cookie = generate_cookie(q, pack);
 	hdrlen = b43_txhdr_size(dev);
-	err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
+	BUILD_BUG_ON(sizeof(wl->pio_scratchspace) < sizeof(struct b43_txhdr));
+	B43_WARN_ON(sizeof(wl->pio_scratchspace) < hdrlen);
+	err = b43_generate_txhdr(dev, (u8 *)txhdr, skb,
 				 info, cookie);
 	if (err)
 		return err;
@@ -477,9 +483,9 @@
 
 	pack->skb = skb;
 	if (q->rev >= 8)
-		pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
+		pio_tx_frame_4byte_queue(pack, (const u8 *)txhdr, hdrlen);
 	else
-		pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
+		pio_tx_frame_2byte_queue(pack, (const u8 *)txhdr, hdrlen);
 
 	/* Remove it from the list of available packet slots.
 	 * It will be put back when we receive the status report. */
@@ -625,8 +631,11 @@
 	unsigned int i, padding;
 	struct sk_buff *skb;
 	const char *err_msg = NULL;
+	struct b43_rxhdr_fw4 *rxhdr =
+		(struct b43_rxhdr_fw4 *)wl->pio_scratchspace;
 
-	memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
+	BUILD_BUG_ON(sizeof(wl->pio_scratchspace) < sizeof(*rxhdr));
+	memset(rxhdr, 0, sizeof(*rxhdr));
 
 	/* Check if we have data and wait for it to get ready. */
 	if (q->rev >= 8) {
@@ -664,16 +673,16 @@
 
 	/* Get the preamble (RX header) */
 	if (q->rev >= 8) {
-		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
+		ssb_block_read(dev->dev, rxhdr, sizeof(*rxhdr),
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 	} else {
-		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
+		ssb_block_read(dev->dev, rxhdr, sizeof(*rxhdr),
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 	}
 	/* Sanity checks. */
-	len = le16_to_cpu(wl->rxhdr.frame_len);
+	len = le16_to_cpu(rxhdr->frame_len);
 	if (unlikely(len > 0x700)) {
 		err_msg = "len > 0x700";
 		goto rx_error;
@@ -683,7 +692,7 @@
 		goto rx_error;
 	}
 
-	macstat = le32_to_cpu(wl->rxhdr.mac_status);
+	macstat = le32_to_cpu(rxhdr->mac_status);
 	if (macstat & B43_RX_MAC_FCSERR) {
 		if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
 			/* Drop frames with failed FCS. */
@@ -708,22 +717,25 @@
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 		if (len & 3) {
+			u8 *tail = wl->pio_tailspace;
+			BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 4);
+
 			/* Read the last few bytes. */
-			ssb_block_read(dev->dev, wl->rx_tail, 4,
+			ssb_block_read(dev->dev, tail, 4,
 				       q->mmio_base + B43_PIO8_RXDATA,
 				       sizeof(u32));
 			switch (len & 3) {
 			case 3:
-				skb->data[len + padding - 3] = wl->rx_tail[0];
-				skb->data[len + padding - 2] = wl->rx_tail[1];
-				skb->data[len + padding - 1] = wl->rx_tail[2];
+				skb->data[len + padding - 3] = tail[0];
+				skb->data[len + padding - 2] = tail[1];
+				skb->data[len + padding - 1] = tail[2];
 				break;
 			case 2:
-				skb->data[len + padding - 2] = wl->rx_tail[0];
-				skb->data[len + padding - 1] = wl->rx_tail[1];
+				skb->data[len + padding - 2] = tail[0];
+				skb->data[len + padding - 1] = tail[1];
 				break;
 			case 1:
-				skb->data[len + padding - 1] = wl->rx_tail[0];
+				skb->data[len + padding - 1] = tail[0];
 				break;
 			}
 		}
@@ -732,22 +744,29 @@
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 		if (len & 1) {
+			u8 *tail = wl->pio_tailspace;
+			BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 2);
+
 			/* Read the last byte. */
-			ssb_block_read(dev->dev, wl->rx_tail, 2,
+			ssb_block_read(dev->dev, tail, 2,
 				       q->mmio_base + B43_PIO_RXDATA,
 				       sizeof(u16));
-			skb->data[len + padding - 1] = wl->rx_tail[0];
+			skb->data[len + padding - 1] = tail[0];
 		}
 	}
 
-	b43_rx(q->dev, skb, &wl->rxhdr);
+	b43_rx(q->dev, skb, rxhdr);
 
 	return 1;
 
 rx_error:
 	if (err_msg)
 		b43dbg(q->dev->wl, "PIO RX error: %s\n", err_msg);
-	b43_piorx_write16(q, B43_PIO_RXCTL, B43_PIO_RXCTL_DATARDY);
+	if (q->rev >= 8)
+		b43_piorx_write32(q, B43_PIO8_RXCTL, B43_PIO8_RXCTL_DATARDY);
+	else
+		b43_piorx_write16(q, B43_PIO_RXCTL, B43_PIO_RXCTL_DATARDY);
+
 	return 1;
 }
 
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index ffdce6f..78016ae 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -33,8 +33,14 @@
 		      & B43_MMIO_RADIO_HWENABLED_HI_MASK))
 			return 1;
 	} else {
-		if (b43_status(dev) >= B43_STAT_STARTED &&
-		    b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
+		/* To prevent CPU fault on PPC, do not read a register
+		 * unless the interface is started; however, on resume
+		 * for hibernation, this routine is entered early. When
+		 * that happens, unconditionally return TRUE.
+		 */
+		if (b43_status(dev) < B43_STAT_STARTED)
+			return 1;
+		if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
 		    & B43_MMIO_RADIO_HWENABLED_LO_MASK)
 			return 1;
 	}
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index f4e9695..eda0652 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -27,7 +27,7 @@
 
 */
 
-#include "b43.h"
+#include "xmit.h"
 #include "phy_common.h"
 #include "dma.h"
 #include "pio.h"
@@ -621,7 +621,6 @@
 						  (phystat0 & B43_RX_PHYST0_OFDM),
 						  (phystat0 & B43_RX_PHYST0_GAINCTL),
 						  (phystat3 & B43_RX_PHYST3_TRSTATE));
-		status.qual = (rxhdr->jssi * 100) / B43_RX_MAX_SSI;
 	}
 
 	if (phystat0 & B43_RX_PHYST0_OFDM)
@@ -690,10 +689,7 @@
 	}
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
-
-	local_bh_disable();
-	ieee80211_rx(dev->wl->hw, skb);
-	local_bh_enable();
+	ieee80211_rx_ni(dev->wl->hw, skb);
 
 #if B43_DEBUG
 	dev->rx_count++;
diff --git a/drivers/net/wireless/b43/xmit.h b/drivers/net/wireless/b43/xmit.h
index 3530de8..d23ff9f 100644
--- a/drivers/net/wireless/b43/xmit.h
+++ b/drivers/net/wireless/b43/xmit.h
@@ -2,6 +2,8 @@
 #define B43_XMIT_H_
 
 #include "main.h"
+#include <net/mac80211.h>
+
 
 #define _b43_declare_plcp_hdr(size) \
 	struct b43_plcp_hdr##size {		\
@@ -332,4 +334,21 @@
 	return raw_kidx;
 }
 
+/* struct b43_private_tx_info - TX info private to b43.
+ * The structure is placed in (struct ieee80211_tx_info *)->rate_driver_data
+ *
+ * @bouncebuffer: DMA Bouncebuffer (if used)
+ */
+struct b43_private_tx_info {
+	void *bouncebuffer;
+};
+
+static inline struct b43_private_tx_info *
+b43_get_priv_tx_info(struct ieee80211_tx_info *info)
+{
+	BUILD_BUG_ON(sizeof(struct b43_private_tx_info) >
+		     sizeof(info->rate_driver_data));
+	return (struct b43_private_tx_info *)info->rate_driver_data;
+}
+
 #endif /* B43_XMIT_H_ */
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 94a4634..1ffa288 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -1,6 +1,6 @@
 config B43LEGACY
 	tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
-	depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
+	depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
 	select SSB
 	select FW_LOADER
 	---help---
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index 038baa8..89fe2f9 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -29,8 +29,6 @@
 
 #define B43legacy_IRQWAIT_MAX_RETRIES	20
 
-#define B43legacy_RX_MAX_SSI		60 /* best guess at max ssi */
-
 /* MMIO offsets */
 #define B43legacy_MMIO_DMA0_REASON	0x20
 #define B43legacy_MMIO_DMA0_IRQ_MASK	0x24
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 8664034..0a86bdf 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -1240,8 +1240,9 @@
 }
 
 static int dma_tx_fragment(struct b43legacy_dmaring *ring,
-			    struct sk_buff *skb)
+			    struct sk_buff **in_skb)
 {
+	struct sk_buff *skb = *in_skb;
 	const struct b43legacy_dma_ops *ops = ring->ops;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	u8 *header;
@@ -1305,8 +1306,14 @@
 		}
 
 		memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+		memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
+		bounce_skb->dev = skb->dev;
+		skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
+		info = IEEE80211_SKB_CB(bounce_skb);
+
 		dev_kfree_skb_any(skb);
 		skb = bounce_skb;
+		*in_skb = bounce_skb;
 		meta->skb = skb;
 		meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
 		if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
@@ -1360,8 +1367,10 @@
 		     struct sk_buff *skb)
 {
 	struct b43legacy_dmaring *ring;
+	struct ieee80211_hdr *hdr;
 	int err = 0;
 	unsigned long flags;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	ring = priority_to_txring(dev, skb_get_queue_mapping(skb));
 	spin_lock_irqsave(&ring->lock, flags);
@@ -1386,7 +1395,11 @@
 		goto out_unlock;
 	}
 
-	err = dma_tx_fragment(ring, skb);
+	/* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
+	 * into the skb data or cb now. */
+	hdr = NULL;
+	info = NULL;
+	err = dma_tx_fragment(ring, &skb);
 	if (unlikely(err == -ENOKEY)) {
 		/* Drop this packet, as we don't have the encryption key
 		 * anymore and must not transmit it unencrypted. */
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 4b60148..ab6a18c 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2677,7 +2677,7 @@
 	if (conf->channel->hw_value != phy->channel)
 		b43legacy_radio_selectchannel(dev, conf->channel->hw_value, 0);
 
-	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_RADIOTAP);
+	dev->wl->radiotap_enabled = !!(conf->flags & IEEE80211_CONF_MONITOR);
 
 	/* Adjust the desired TX power level. */
 	if (conf->power_level != 0) {
@@ -3593,7 +3593,7 @@
 {
 	struct b43legacy_wl *wl = dev->wl;
 	struct ssb_bus *bus = dev->dev->bus;
-	struct pci_dev *pdev = bus->host_pci;
+	struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
 	int err;
 	int have_bphy = 0;
 	int have_gphy = 0;
@@ -3707,7 +3707,7 @@
 
 	if (!list_empty(&wl->devlist)) {
 		/* We are not the first core on this chip. */
-		pdev = dev->bus->host_pci;
+		pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
 		/* Only special chips support more than one wireless
 		 * core, although some of the other chips have more than
 		 * one wireless core as well. Check for this and
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index 8783022..d579df7 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -34,6 +34,13 @@
 		      & B43legacy_MMIO_RADIO_HWENABLED_HI_MASK))
 			return 1;
 	} else {
+		/* To prevent CPU fault on PPC, do not read a register
+		 * unless the interface is started; however, on resume
+		 * for hibernation, this routine is entered early. When
+		 * that happens, unconditionally return TRUE.
+		 */
+		if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
+			return 1;
 		if (b43legacy_read16(dev, B43legacy_MMIO_RADIO_HWENABLED_LO)
 		    & B43legacy_MMIO_RADIO_HWENABLED_LO_MASK)
 			return 1;
diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c
index 103f3c9..9c8882d 100644
--- a/drivers/net/wireless/b43legacy/xmit.c
+++ b/drivers/net/wireless/b43legacy/xmit.c
@@ -549,7 +549,6 @@
 				      (phystat0 & B43legacy_RX_PHYST0_GAINCTL),
 				      (phystat3 & B43legacy_RX_PHYST3_TRSTATE));
 	status.noise = dev->stats.link_noise;
-	status.qual = (jssi * 100) / B43legacy_RX_MAX_SSI;
 	/* change to support A PHY */
 	if (phystat0 & B43legacy_RX_PHYST0_OFDM)
 		status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false);
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index c15db22..287d827 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -1,7 +1,8 @@
 config HOSTAP
 	tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
-	depends on WLAN_80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select CRYPTO
 	select CRYPTO_ARC4
 	select CRYPTO_ECB
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ad8eab4..c9640a3 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -274,9 +274,6 @@
 	conf_reg_t reg;
 	struct hostap_interface *iface = netdev_priv(dev);
 	local_info_t *local = iface->local;
-	tuple_t tuple;
-	cisparse_t *parse = NULL;
-	u_char buf[64];
 	struct hostap_cs_priv *hw_priv = local->hw_priv;
 
 	if (hw_priv->link->io.NumPorts1 < 0x42) {
@@ -285,28 +282,13 @@
 		goto done;
 	}
 
-	parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
-	if (parse == NULL) {
-		ret = -ENOMEM;
-		goto done;
-	}
-
-	tuple.Attributes = TUPLE_RETURN_COMMON;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
 	if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
 		/* No SanDisk manfid found */
 		ret = -ENODEV;
 		goto done;
 	}
 
-	tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
-	if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
-	    pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
-	    pcmcia_parse_tuple(&tuple, parse) ||
-		parse->longlink_mfc.nfn < 2) {
+	if (hw_priv->link->socket->functions < 2) {
 		/* No multi-function links found */
 		ret = -ENODEV;
 		goto done;
@@ -354,7 +336,6 @@
 	udelay(10);
 
 done:
-	kfree(parse);
 	return ret;
 }
 
@@ -529,10 +510,6 @@
 }
 
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-
 /* run after a CARD_INSERTION event is received to configure the PCMCIA
  * socket and make the device available to the system */
 
@@ -624,7 +601,6 @@
 	struct hostap_interface *iface;
 	local_info_t *local;
 	int ret = 1;
-	int last_fn, last_ret;
 	struct hostap_cs_priv *hw_priv;
 
 	PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -636,19 +612,18 @@
 	}
 
 	/* Look for an appropriate configuration table entry in the CIS */
-	last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
-	if (last_ret) {
+	ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+	if (ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR "GetNextTuple(): No matching "
 			       "CIS configuration.  Maybe you need the "
 			       "ignore_cis_vcc=1 parameter.\n");
-		cs_error(link, RequestIO, last_ret);
 		goto failed;
 	}
 
 	/* Need to allocate net_device before requesting IRQ handler */
 	dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
-				     &handle_to_dev(link));
+				     &link->dev);
 	if (dev == NULL)
 		goto failed;
 	link->priv = dev;
@@ -666,13 +641,11 @@
 	 * irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING |
-				       IRQ_HANDLE_PRESENT;
-		link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+		link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 		link->irq.Handler = prism2_interrupt;
-		link->irq.Instance = dev;
-		CS_CHECK(RequestIRQ,
-			 pcmcia_request_irq(link, &link->irq));
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 
 	/*
@@ -680,8 +653,9 @@
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	CS_CHECK(RequestConfiguration,
-		 pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	dev->irq = link->irq.AssignedIRQ;
 	dev->base_addr = link->io.BasePort1;
@@ -714,9 +688,6 @@
 	}
 	return ret;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
-
  failed:
 	kfree(hw_priv);
 	prism2_release((u_long)link);
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index a813138..2715b10 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -4,8 +4,10 @@
 
 config IPW2100
 	tristate "Intel PRO/Wireless 2100 Network Connection"
-	depends on PCI && WLAN_80211 && CFG80211
+	depends on PCI && CFG80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	select LIB80211
 	select LIBIPW
@@ -63,8 +65,10 @@
 
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
-	depends on PCI && WLAN_80211 && CFG80211
+	depends on PCI && CFG80211 && CFG80211_WEXT
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	select LIB80211
 	select LIBIPW
@@ -150,8 +154,9 @@
 
 config LIBIPW
 	tristate
-	depends on PCI && WLAN_80211 && CFG80211
+	depends on PCI && CFG80211
 	select WIRELESS_EXT
+	select WEXT_SPY
 	select CRYPTO
 	select CRYPTO_ARC4
 	select CRYPTO_ECB
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 6e2fc0c..17a9cb3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -296,6 +296,33 @@
 };
 #endif
 
+#define WEXT_USECHANNELS 1
+
+static const long ipw2100_frequencies[] = {
+	2412, 2417, 2422, 2427,
+	2432, 2437, 2442, 2447,
+	2452, 2457, 2462, 2467,
+	2472, 2484
+};
+
+#define FREQ_COUNT	ARRAY_SIZE(ipw2100_frequencies)
+
+static const long ipw2100_rates_11b[] = {
+	1000000,
+	2000000,
+	5500000,
+	11000000
+};
+
+static struct ieee80211_rate ipw2100_bg_rates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+};
+
+#define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
+
 /* Pre-decl until we get the code solid and then we can clean it up */
 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
@@ -1141,6 +1168,7 @@
 	int i;
 
 	if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
+		wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
 		priv->status &= ~STATUS_RF_KILL_HW;
 		return 0;
 	}
@@ -1151,10 +1179,13 @@
 		value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
 	}
 
-	if (value == 0)
+	if (value == 0) {
+		wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
 		priv->status |= STATUS_RF_KILL_HW;
-	else
+	} else {
+		wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
 		priv->status &= ~STATUS_RF_KILL_HW;
+	}
 
 	return (value == 0);
 }
@@ -1814,13 +1845,6 @@
 	return rc;
 }
 
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
-	struct ipw2100_priv *priv = libipw_priv(dev);
-	return ipw2100_up(priv, 1);
-}
-
 static void ipw2100_down(struct ipw2100_priv *priv)
 {
 	unsigned long flags;
@@ -1875,6 +1899,64 @@
 	netif_stop_queue(priv->net_dev);
 }
 
+/* Called by register_netdev() */
+static int ipw2100_net_init(struct net_device *dev)
+{
+	struct ipw2100_priv *priv = libipw_priv(dev);
+	const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
+	struct wireless_dev *wdev = &priv->ieee->wdev;
+	int ret;
+	int i;
+
+	ret = ipw2100_up(priv, 1);
+	if (ret)
+		return ret;
+
+	memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
+
+	/* fill-out priv->ieee->bg_band */
+	if (geo->bg_channels) {
+		struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
+
+		bg_band->band = IEEE80211_BAND_2GHZ;
+		bg_band->n_channels = geo->bg_channels;
+		bg_band->channels =
+			kzalloc(geo->bg_channels *
+				sizeof(struct ieee80211_channel), GFP_KERNEL);
+		/* translate geo->bg to bg_band.channels */
+		for (i = 0; i < geo->bg_channels; i++) {
+			bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
+			bg_band->channels[i].center_freq = geo->bg[i].freq;
+			bg_band->channels[i].hw_value = geo->bg[i].channel;
+			bg_band->channels[i].max_power = geo->bg[i].max_power;
+			if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
+				bg_band->channels[i].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+			if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
+				bg_band->channels[i].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
+				bg_band->channels[i].flags |=
+					IEEE80211_CHAN_RADAR;
+			/* No equivalent for LIBIPW_CH_80211H_RULES,
+			   LIBIPW_CH_UNIFORM_SPREADING, or
+			   LIBIPW_CH_B_ONLY... */
+		}
+		/* point at bitrate info */
+		bg_band->bitrates = ipw2100_bg_rates;
+		bg_band->n_bitrates = RATE_COUNT;
+
+		wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
+	}
+
+	set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
+	if (wiphy_register(wdev->wiphy)) {
+		ipw2100_down(priv);
+		return -EIO;
+	}
+	return 0;
+}
+
 static void ipw2100_reset_adapter(struct work_struct *work)
 {
 	struct ipw2100_priv *priv =
@@ -2090,6 +2172,7 @@
 		       priv->net_dev->name);
 
 	/* RF_KILL is now enabled (else we wouldn't be here) */
+	wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
 	priv->status |= STATUS_RF_KILL_HW;
 
 	/* Make sure the RF Kill check timer is running */
@@ -6029,7 +6112,7 @@
 	struct ipw2100_priv *priv;
 	struct net_device *dev;
 
-	dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
+	dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
 	if (!dev)
 		return NULL;
 	priv = libipw_priv(dev);
@@ -6342,7 +6425,7 @@
 		sysfs_remove_group(&pci_dev->dev.kobj,
 				   &ipw2100_attribute_group);
 
-		free_ieee80211(dev);
+		free_ieee80211(dev, 0);
 		pci_set_drvdata(pci_dev, NULL);
 	}
 
@@ -6400,7 +6483,10 @@
 		if (dev->base_addr)
 			iounmap((void __iomem *)dev->base_addr);
 
-		free_ieee80211(dev);
+		/* wiphy_unregister needs to be here, before free_ieee80211 */
+		wiphy_unregister(priv->ieee->wdev.wiphy);
+		kfree(priv->ieee->bg_band.channels);
+		free_ieee80211(dev, 0);
 	}
 
 	pci_release_regions(pci_dev);
@@ -6487,6 +6573,16 @@
 }
 #endif
 
+static void ipw2100_shutdown(struct pci_dev *pci_dev)
+{
+	struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+
+	/* Take down the device; powers it off, etc. */
+	ipw2100_down(priv);
+
+	pci_disable_device(pci_dev);
+}
+
 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
 
 static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
@@ -6550,6 +6646,7 @@
 	.suspend = ipw2100_suspend,
 	.resume = ipw2100_resume,
 #endif
+	.shutdown = ipw2100_shutdown,
 };
 
 /**
@@ -6601,26 +6698,6 @@
 module_init(ipw2100_init);
 module_exit(ipw2100_exit);
 
-#define WEXT_USECHANNELS 1
-
-static const long ipw2100_frequencies[] = {
-	2412, 2417, 2422, 2427,
-	2432, 2437, 2442, 2447,
-	2452, 2457, 2462, 2467,
-	2472, 2484
-};
-
-#define FREQ_COUNT	ARRAY_SIZE(ipw2100_frequencies)
-
-static const long ipw2100_rates_11b[] = {
-	1000000,
-	2000000,
-	5500000,
-	11000000
-};
-
-#define RATE_COUNT ARRAY_SIZE(ipw2100_rates_11b)
-
 static int ipw2100_wx_get_name(struct net_device *dev,
 			       struct iw_request_info *info,
 			       union iwreq_data *wrqu, char *extra)
@@ -8462,6 +8539,12 @@
 	return 0;
 }
 
+MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
+#ifdef CONFIG_IPW2100_MONITOR
+MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
+#endif
+MODULE_FIRMWARE(IPW2100_FW_NAME(""));
+
 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
 				     struct ipw2100_fw *fw)
 {
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index a6ca536e..c28984a 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -81,6 +81,11 @@
 MODULE_VERSION(DRV_VERSION);
 MODULE_AUTHOR(DRV_COPYRIGHT);
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("ipw2200-ibss.fw");
+#ifdef CONFIG_IPW2200_MONITOR
+MODULE_FIRMWARE("ipw2200-sniffer.fw");
+#endif
+MODULE_FIRMWARE("ipw2200-bss.fw");
 
 static int cmdlog = 0;
 static int debug = 0;
@@ -104,6 +109,25 @@
 static int rtap_iface = 0;     /* def: 0 -- do not create rtap interface */
 #endif
 
+static struct ieee80211_rate ipw2200_rates[] = {
+	{ .bitrate = 10 },
+	{ .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+	{ .bitrate = 60 },
+	{ .bitrate = 90 },
+	{ .bitrate = 120 },
+	{ .bitrate = 180 },
+	{ .bitrate = 240 },
+	{ .bitrate = 360 },
+	{ .bitrate = 480 },
+	{ .bitrate = 540 }
+};
+
+#define ipw2200_a_rates		(ipw2200_rates + 4)
+#define ipw2200_num_a_rates	8
+#define ipw2200_bg_rates	(ipw2200_rates + 0)
+#define ipw2200_num_bg_rates	12
 
 #ifdef CONFIG_IPW2200_QOS
 static int qos_enable = 0;
@@ -1734,10 +1758,13 @@
 
 static int rf_kill_active(struct ipw_priv *priv)
 {
-	if (0 == (ipw_read32(priv, 0x30) & 0x10000))
+	if (0 == (ipw_read32(priv, 0x30) & 0x10000)) {
 		priv->status |= STATUS_RF_KILL_HW;
-	else
+		wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
+	} else {
 		priv->status &= ~STATUS_RF_KILL_HW;
+		wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
+	}
 
 	return (priv->status & STATUS_RF_KILL_HW) ? 1 : 0;
 }
@@ -2020,6 +2047,7 @@
 	if (inta & IPW_INTA_BIT_RF_KILL_DONE) {
 		IPW_DEBUG_RF_KILL("RF_KILL_DONE\n");
 		priv->status |= STATUS_RF_KILL_HW;
+		wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
 		wake_up_interruptible(&priv->wait_command_queue);
 		priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
 		cancel_delayed_work(&priv->request_scan);
@@ -8655,24 +8683,6 @@
  *
  */
 
-static int ipw_wx_get_name(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu, char *extra)
-{
-	struct ipw_priv *priv = libipw_priv(dev);
-	mutex_lock(&priv->mutex);
-	if (priv->status & STATUS_RF_KILL_MASK)
-		strcpy(wrqu->name, "radio off");
-	else if (!(priv->status & STATUS_ASSOCIATED))
-		strcpy(wrqu->name, "unassociated");
-	else
-		snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
-			 ipw_modes[priv->assoc_request.ieee_mode]);
-	IPW_DEBUG_WX("Name: %s\n", wrqu->name);
-	mutex_unlock(&priv->mutex);
-	return 0;
-}
-
 static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
 {
 	if (channel == 0) {
@@ -9972,7 +9982,7 @@
 /* Rebase the WE IOCTLs to zero for the handler array */
 #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
 static iw_handler ipw_wx_handlers[] = {
-	IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
+	IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
 	IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
 	IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
 	IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
@@ -11275,6 +11285,7 @@
 		if (!(priv->config & CFG_CUSTOM_MAC))
 			eeprom_parse_mac(priv, priv->mac_addr);
 		memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
+		memcpy(priv->net_dev->perm_addr, priv->mac_addr, ETH_ALEN);
 
 		for (j = 0; j < ARRAY_SIZE(ipw_geos); j++) {
 			if (!memcmp(&priv->eeprom[EEPROM_COUNTRY_CODE],
@@ -11416,16 +11427,100 @@
 /* Called by register_netdev() */
 static int ipw_net_init(struct net_device *dev)
 {
+	int i, rc = 0;
 	struct ipw_priv *priv = libipw_priv(dev);
+	const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
+	struct wireless_dev *wdev = &priv->ieee->wdev;
 	mutex_lock(&priv->mutex);
 
 	if (ipw_up(priv)) {
-		mutex_unlock(&priv->mutex);
-		return -EIO;
+		rc = -EIO;
+		goto out;
 	}
 
+	memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
+
+	/* fill-out priv->ieee->bg_band */
+	if (geo->bg_channels) {
+		struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
+
+		bg_band->band = IEEE80211_BAND_2GHZ;
+		bg_band->n_channels = geo->bg_channels;
+		bg_band->channels =
+			kzalloc(geo->bg_channels *
+				sizeof(struct ieee80211_channel), GFP_KERNEL);
+		/* translate geo->bg to bg_band.channels */
+		for (i = 0; i < geo->bg_channels; i++) {
+			bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
+			bg_band->channels[i].center_freq = geo->bg[i].freq;
+			bg_band->channels[i].hw_value = geo->bg[i].channel;
+			bg_band->channels[i].max_power = geo->bg[i].max_power;
+			if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
+				bg_band->channels[i].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+			if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
+				bg_band->channels[i].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
+				bg_band->channels[i].flags |=
+					IEEE80211_CHAN_RADAR;
+			/* No equivalent for LIBIPW_CH_80211H_RULES,
+			   LIBIPW_CH_UNIFORM_SPREADING, or
+			   LIBIPW_CH_B_ONLY... */
+		}
+		/* point at bitrate info */
+		bg_band->bitrates = ipw2200_bg_rates;
+		bg_band->n_bitrates = ipw2200_num_bg_rates;
+
+		wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
+	}
+
+	/* fill-out priv->ieee->a_band */
+	if (geo->a_channels) {
+		struct ieee80211_supported_band *a_band = &priv->ieee->a_band;
+
+		a_band->band = IEEE80211_BAND_5GHZ;
+		a_band->n_channels = geo->a_channels;
+		a_band->channels =
+			kzalloc(geo->a_channels *
+				sizeof(struct ieee80211_channel), GFP_KERNEL);
+		/* translate geo->bg to a_band.channels */
+		for (i = 0; i < geo->a_channels; i++) {
+			a_band->channels[i].band = IEEE80211_BAND_2GHZ;
+			a_band->channels[i].center_freq = geo->a[i].freq;
+			a_band->channels[i].hw_value = geo->a[i].channel;
+			a_band->channels[i].max_power = geo->a[i].max_power;
+			if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
+				a_band->channels[i].flags |=
+					IEEE80211_CHAN_PASSIVE_SCAN;
+			if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
+				a_band->channels[i].flags |=
+					IEEE80211_CHAN_NO_IBSS;
+			if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
+				a_band->channels[i].flags |=
+					IEEE80211_CHAN_RADAR;
+			/* No equivalent for LIBIPW_CH_80211H_RULES,
+			   LIBIPW_CH_UNIFORM_SPREADING, or
+			   LIBIPW_CH_B_ONLY... */
+		}
+		/* point at bitrate info */
+		a_band->bitrates = ipw2200_a_rates;
+		a_band->n_bitrates = ipw2200_num_a_rates;
+
+		wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band;
+	}
+
+	set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
+
+	/* With that information in place, we can now register the wiphy... */
+	if (wiphy_register(wdev->wiphy)) {
+		rc = -EIO;
+		goto out;
+	}
+
+out:
 	mutex_unlock(&priv->mutex);
-	return 0;
+	return rc;
 }
 
 /* PCI driver stuff */
@@ -11556,7 +11651,7 @@
 	if (priv->prom_net_dev)
 		return -EPERM;
 
-	priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv));
+	priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1);
 	if (priv->prom_net_dev == NULL)
 		return -ENOMEM;
 
@@ -11575,7 +11670,7 @@
 
 	rc = register_netdev(priv->prom_net_dev);
 	if (rc) {
-		free_ieee80211(priv->prom_net_dev);
+		free_ieee80211(priv->prom_net_dev, 1);
 		priv->prom_net_dev = NULL;
 		return rc;
 	}
@@ -11589,7 +11684,7 @@
 		return;
 
 	unregister_netdev(priv->prom_net_dev);
-	free_ieee80211(priv->prom_net_dev);
+	free_ieee80211(priv->prom_net_dev, 1);
 
 	priv->prom_net_dev = NULL;
 }
@@ -11617,7 +11712,7 @@
 	struct ipw_priv *priv;
 	int i;
 
-	net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
+	net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0);
 	if (net_dev == NULL) {
 		err = -ENOMEM;
 		goto out;
@@ -11765,7 +11860,7 @@
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
       out_free_ieee80211:
-	free_ieee80211(priv->net_dev);
+	free_ieee80211(priv->net_dev, 0);
       out:
 	return err;
 }
@@ -11832,7 +11927,11 @@
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
-	free_ieee80211(priv->net_dev);
+	/* wiphy_unregister needs to be here, before free_ieee80211 */
+	wiphy_unregister(priv->ieee->wdev.wiphy);
+	kfree(priv->ieee->a_band.channels);
+	kfree(priv->ieee->bg_band.channels);
+	free_ieee80211(priv->net_dev, 0);
 	free_firmware();
 }
 
diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h
index 1e334ff..bf45391 100644
--- a/drivers/net/wireless/ipw2x00/libipw.h
+++ b/drivers/net/wireless/ipw2x00/libipw.h
@@ -31,6 +31,7 @@
 #include <linux/ieee80211.h>
 
 #include <net/lib80211.h>
+#include <net/cfg80211.h>
 
 #define LIBIPW_VERSION "git-1.1.13"
 
@@ -783,12 +784,15 @@
 
 struct libipw_device {
 	struct net_device *dev;
+	struct wireless_dev wdev;
 	struct libipw_security sec;
 
 	/* Bookkeeping structures */
 	struct libipw_stats ieee_stats;
 
 	struct libipw_geo geo;
+	struct ieee80211_supported_band bg_band;
+	struct ieee80211_supported_band a_band;
 
 	/* Probe / Beacon management */
 	struct list_head network_free_list;
@@ -1014,8 +1018,8 @@
 }
 
 /* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev);
-extern struct net_device *alloc_ieee80211(int sizeof_priv);
+extern void free_ieee80211(struct net_device *dev, int monitor);
+extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
 extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
 
 extern void libipw_networks_age(struct libipw_device *ieee,
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index eb2b608..bf21eb3 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -62,6 +62,9 @@
 MODULE_AUTHOR(DRV_COPYRIGHT);
 MODULE_LICENSE("GPL");
 
+struct cfg80211_ops libipw_config_ops = { };
+void *libipw_wiphy_privid = &libipw_wiphy_privid;
+
 static int libipw_networks_allocate(struct libipw_device *ieee)
 {
 	if (ieee->networks)
@@ -140,7 +143,7 @@
 }
 EXPORT_SYMBOL(libipw_change_mtu);
 
-struct net_device *alloc_ieee80211(int sizeof_priv)
+struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
 {
 	struct libipw_device *ieee;
 	struct net_device *dev;
@@ -157,10 +160,31 @@
 
 	ieee->dev = dev;
 
+	if (!monitor) {
+		ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0);
+		if (!ieee->wdev.wiphy) {
+			LIBIPW_ERROR("Unable to allocate wiphy.\n");
+			goto failed_free_netdev;
+		}
+
+		ieee->dev->ieee80211_ptr = &ieee->wdev;
+		ieee->wdev.iftype = NL80211_IFTYPE_STATION;
+
+		/* Fill-out wiphy structure bits we know...  Not enough info
+		   here to call set_wiphy_dev or set MAC address or channel info
+		   -- have to do that in ->ndo_init... */
+		ieee->wdev.wiphy->privid = libipw_wiphy_privid;
+
+		ieee->wdev.wiphy->max_scan_ssids = 1;
+		ieee->wdev.wiphy->max_scan_ie_len = 0;
+		ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
+						| BIT(NL80211_IFTYPE_ADHOC);
+	}
+
 	err = libipw_networks_allocate(ieee);
 	if (err) {
 		LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err);
-		goto failed_free_netdev;
+		goto failed_free_wiphy;
 	}
 	libipw_networks_initialize(ieee);
 
@@ -193,19 +217,27 @@
 
 	return dev;
 
+failed_free_wiphy:
+	if (!monitor)
+		wiphy_free(ieee->wdev.wiphy);
 failed_free_netdev:
 	free_netdev(dev);
 failed:
 	return NULL;
 }
 
-void free_ieee80211(struct net_device *dev)
+void free_ieee80211(struct net_device *dev, int monitor)
 {
 	struct libipw_device *ieee = netdev_priv(dev);
 
 	lib80211_crypt_info_free(&ieee->crypt_info);
 
 	libipw_networks_free(ieee);
+
+	/* free cfg80211 resources */
+	if (!monitor)
+		wiphy_free(ieee->wdev.wiphy);
+
 	free_netdev(dev);
 }
 
@@ -216,17 +248,22 @@
 EXPORT_SYMBOL_GPL(libipw_debug_level);
 static struct proc_dir_entry *libipw_proc = NULL;
 
-static int show_debug_level(char *page, char **start, off_t offset,
-			    int count, int *eof, void *data)
+static int debug_level_proc_show(struct seq_file *m, void *v)
 {
-	return snprintf(page, count, "0x%08X\n", libipw_debug_level);
+	seq_printf(m, "0x%08X\n", libipw_debug_level);
+	return 0;
 }
 
-static int store_debug_level(struct file *file, const char __user * buffer,
-			     unsigned long count, void *data)
+static int debug_level_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_level_proc_show, NULL);
+}
+
+static ssize_t debug_level_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
 {
 	char buf[] = "0x00000000\n";
-	unsigned long len = min((unsigned long)sizeof(buf) - 1, count);
+	size_t len = min(sizeof(buf) - 1, count);
 	unsigned long val;
 
 	if (copy_from_user(buf, buffer, len))
@@ -240,6 +277,15 @@
 
 	return strnlen(buf, len);
 }
+
+static const struct file_operations debug_level_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= debug_level_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= debug_level_proc_write,
+};
 #endif				/* CONFIG_LIBIPW_DEBUG */
 
 static int __init libipw_init(void)
@@ -254,16 +300,13 @@
 				" proc directory\n");
 		return -EIO;
 	}
-	e = create_proc_entry("debug_level", S_IFREG | S_IRUGO | S_IWUSR,
-			      libipw_proc);
+	e = proc_create("debug_level", S_IRUGO | S_IWUSR, libipw_proc,
+			&debug_level_proc_fops);
 	if (!e) {
 		remove_proc_entry(DRV_NAME, init_net.proc_net);
 		libipw_proc = NULL;
 		return -EIO;
 	}
-	e->read_proc = show_debug_level;
-	e->write_proc = store_debug_level;
-	e->data = NULL;
 #endif				/* CONFIG_LIBIPW_DEBUG */
 
 	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 99310c0..b16b06c 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,17 +1,7 @@
 config IWLWIFI
 	tristate "Intel Wireless Wifi"
-	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
-	select LIB80211
+	depends on PCI && MAC80211 && EXPERIMENTAL
 	select FW_LOADER
-	select MAC80211_LEDS if IWLWIFI_LEDS
-	select LEDS_CLASS if IWLWIFI_LEDS
-
-config IWLWIFI_LEDS
-	bool "Enable LED support in iwlagn and iwl3945 drivers"
-	depends on IWLWIFI
-	default y
-	---help---
-	  Select this if you want LED support.
 
 config IWLWIFI_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwlagn driver"
@@ -50,6 +40,24 @@
         ---help---
 	  Enable creation of debugfs files for the iwlwifi drivers.
 
+config IWLWIFI_DEVICE_TRACING
+	bool "iwlwifi device access tracing"
+	depends on IWLWIFI
+	depends on EVENT_TRACING
+	help
+	  Say Y here to trace all commands, including TX frames and IO
+	  accesses, sent to the device. If you say yes, iwlwifi will
+	  register with the ftrace framework for event tracing and dump
+	  all this information to the ringbuffer, you may need to
+	  increase the ringbuffer size. See the ftrace documentation
+	  for more information.
+
+	  When tracing is not enabled, this option still has some
+	  (though rather small) overhead.
+
+	  If unsure, say Y so we can help you better when problems
+	  occur.
+
 config IWLAGN
 	tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
 	depends on IWLWIFI
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 1d4e0a2..7f82044 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,20 +1,22 @@
 obj-$(CONFIG_IWLWIFI)	+= iwlcore.o
 iwlcore-objs 		:= iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
 iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
-iwlcore-objs 		+= iwl-scan.o
+iwlcore-objs 		+= iwl-scan.o iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
+iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
 
+CFLAGS_iwl-devtrace.o := -I$(src)
+
+# AGN
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
-iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o
+iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
 
 iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
 iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
 iwlagn-$(CONFIG_IWL5000) += iwl-6000.o
 iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
 
+# 3945
 obj-$(CONFIG_IWL3945)	+= iwl3945.o
 iwl3945-objs		:= iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
-
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 950267a..8414178 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -44,6 +44,7 @@
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
 #include "iwl-5000-hw.h"
+#include "iwl-agn-led.h"
 
 /* Highest firmware API version supported */
 #define IWL1000_UCODE_API_MAX 3
@@ -76,7 +77,10 @@
 /* NIC configuration for 1000 series */
 static void iwl1000_nic_config(struct iwl_priv *priv)
 {
-	iwl5000_nic_config(priv);
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
 	/* Setting digital SVR for 1000 card to 1.32V */
 	/* locking is acquired in iwl_set_bits_mask_prph() function */
@@ -106,9 +110,8 @@
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl1000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -142,6 +145,7 @@
 	.lib = &iwl1000_lib,
 	.hcmd = &iwl5000_hcmd,
 	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 struct iwl_cfg iwl1000_bgn_cfg = {
@@ -152,15 +156,50 @@
 	.sku = IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl1000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_A,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
 	.shadow_ram_support = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.support_ct_kill_exit = true,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
+struct iwl_cfg iwl1000_bg_cfg = {
+	.name = "1000 Series BG",
+	.fw_name_pre = IWL1000_FW_PRE,
+	.ucode_api_max = IWL1000_UCODE_API_MAX,
+	.ucode_api_min = IWL1000_UCODE_API_MIN,
+	.sku = IWL_SKU_G,
+	.ops = &iwl1000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_A,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
+	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
+	.shadow_ram_support = false,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.support_ct_kill_exit = true,
+};
+
+MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
index 1677278..6fd10d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
@@ -71,12 +71,6 @@
 
 #include "iwl-eeprom.h"
 
-/*
- * uCode queue management definitions ...
- * Queue #4 is the command queue for 3945 and 4965.
- */
-#define IWL_CMD_QUEUE_NUM	4
-
 /* Time constants */
 #define SHORT_SLOT_TIME 9
 #define LONG_SLOT_TIME 20
@@ -254,12 +248,6 @@
 #define TFD_CTL_PAD_SET(n)         (n << 28)
 #define TFD_CTL_PAD_GET(ctl)       (ctl >> 28)
 
-/*
- * RX related structures and functions
- */
-#define RX_FREE_BUFFERS 64
-#define RX_LOW_WATERMARK 8
-
 /* Sizes and addresses for instruction and data memory (SRAM) in
  * 3945's embedded processor.  Driver access is via HBUS_TARG_MEM_* regs. */
 #define IWL39_RTC_INST_LOWER_BOUND		(0x000000)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index 8c29ded..a871d09 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -24,8 +24,6 @@
  *
  *****************************************************************************/
 
-#ifdef CONFIG_IWLWIFI_LEDS
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -43,388 +41,51 @@
 #include "iwl-3945.h"
 #include "iwl-core.h"
 #include "iwl-dev.h"
+#include "iwl-3945-led.h"
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static const char *led_type_str[] = {
-	__stringify(IWL_LED_TRG_TX),
-	__stringify(IWL_LED_TRG_RX),
-	__stringify(IWL_LED_TRG_ASSOC),
-	__stringify(IWL_LED_TRG_RADIO),
-	NULL
-};
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-static const struct {
-	u16 brightness;
-	u8 on_time;
-	u8 off_time;
-} blink_tbl[] =
-{
-	{300, 25, 25},
-	{200, 40, 40},
-	{100, 55, 55},
-	{70, 65, 65},
-	{50, 75, 75},
-	{20, 85, 85},
-	{15, 95, 95 },
-	{10, 110, 110},
-	{5, 130, 130},
-	{0, 167, 167},
-	/* SOLID_ON */
-	{-1, IWL_LED_SOLID, 0}
-};
-
-#define IWL_1MB_RATE (128 * 1024)
-#define IWL_LED_THRESHOLD (16)
-#define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /*Exclude Solid on*/
-#define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1)
-
-static void iwl3945_led_cmd_callback(struct iwl_priv *priv,
-				     struct iwl_device_cmd *cmd,
-				     struct sk_buff *skb)
-{
-}
-
-static inline int iwl3945_brightness_to_idx(enum led_brightness brightness)
-{
-	return fls(0x000000FF & (u32)brightness);
-}
 
 /* Send led command */
-static int iwl_send_led_cmd(struct iwl_priv *priv,
-			    struct iwl_led_cmd *led_cmd)
+static int iwl3945_send_led_cmd(struct iwl_priv *priv,
+				struct iwl_led_cmd *led_cmd)
 {
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_LEDS_CMD,
 		.len = sizeof(struct iwl_led_cmd),
 		.data = led_cmd,
 		.flags = CMD_ASYNC,
-		.callback = iwl3945_led_cmd_callback,
+		.callback = NULL,
 	};
 
 	return iwl_send_cmd(priv, &cmd);
 }
 
-
-
 /* Set led on command */
-static int iwl3945_led_pattern(struct iwl_priv *priv, int led_id,
-			       unsigned int idx)
+static int iwl3945_led_on(struct iwl_priv *priv)
 {
 	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
-		.interval = IWL_DEF_LED_INTRVL
-	};
-
-	BUG_ON(idx > IWL_MAX_BLINK_TBL);
-
-	led_cmd.on = blink_tbl[idx].on_time;
-	led_cmd.off = blink_tbl[idx].off_time;
-
-	return iwl_send_led_cmd(priv, &led_cmd);
-}
-
-
-/* Set led on command */
-static int iwl3945_led_on(struct iwl_priv *priv, int led_id)
-{
-	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
+		.id = IWL_LED_LINK,
 		.on = IWL_LED_SOLID,
 		.off = 0,
 		.interval = IWL_DEF_LED_INTRVL
 	};
-	return iwl_send_led_cmd(priv, &led_cmd);
+	return iwl3945_send_led_cmd(priv, &led_cmd);
 }
 
 /* Set led off command */
-static int iwl3945_led_off(struct iwl_priv *priv, int led_id)
+static int iwl3945_led_off(struct iwl_priv *priv)
 {
 	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
+		.id = IWL_LED_LINK,
 		.on = 0,
 		.off = 0,
 		.interval = IWL_DEF_LED_INTRVL
 	};
-	IWL_DEBUG_LED(priv, "led off %d\n", led_id);
-	return iwl_send_led_cmd(priv, &led_cmd);
+	IWL_DEBUG_LED(priv, "led off\n");
+	return iwl3945_send_led_cmd(priv, &led_cmd);
 }
 
-/*
- *  Set led on in case of association
- *  */
-static int iwl3945_led_associate(struct iwl_priv *priv, int led_id)
-{
-	IWL_DEBUG_LED(priv, "Associated\n");
-
-	priv->allow_blinking = 1;
-	return iwl3945_led_on(priv, led_id);
-}
-/* Set Led off in case of disassociation */
-static int iwl3945_led_disassociate(struct iwl_priv *priv, int led_id)
-{
-	IWL_DEBUG_LED(priv, "Disassociated\n");
-
-	priv->allow_blinking = 0;
-
-	return 0;
-}
-
-/*
- * brightness call back function for Tx/Rx LED
- */
-static int iwl3945_led_associated(struct iwl_priv *priv, int led_id)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    !test_bit(STATUS_READY, &priv->status))
-		return 0;
-
-
-	/* start counting Tx/Rx bytes */
-	if (!priv->last_blink_time && priv->allow_blinking)
-		priv->last_blink_time = jiffies;
-	return 0;
-}
-
-/*
- * brightness call back for association and radio
- */
-static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
-				enum led_brightness brightness)
-{
-	struct iwl_led *led = container_of(led_cdev,
-					   struct iwl_led, led_dev);
-	struct iwl_priv *priv = led->priv;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
-			led_type_str[led->type], brightness);
-
-	switch (brightness) {
-	case LED_FULL:
-		if (led->led_on)
-			led->led_on(priv, IWL_LED_LINK);
-		break;
-	case LED_OFF:
-		if (led->led_off)
-			led->led_off(priv, IWL_LED_LINK);
-		break;
-	default:
-		if (led->led_pattern) {
-			int idx = iwl3945_brightness_to_idx(brightness);
-			led->led_pattern(priv, IWL_LED_LINK, idx);
-		}
-		break;
-	}
-}
-
-/*
- * Register led class with the system
- */
-static int iwl3945_led_register_led(struct iwl_priv *priv,
-				   struct iwl_led *led,
-				   enum led_type type, u8 set_led,
-				   char *trigger)
-{
-	struct device *device = wiphy_dev(priv->hw->wiphy);
-	int ret;
-
-	led->led_dev.name = led->name;
-	led->led_dev.brightness_set = iwl3945_led_brightness_set;
-	led->led_dev.default_trigger = trigger;
-
-	led->priv = priv;
-	led->type = type;
-
-	ret = led_classdev_register(device, &led->led_dev);
-	if (ret) {
-		IWL_ERR(priv, "Error: failed to register led handler.\n");
-		return ret;
-	}
-
-	led->registered = 1;
-
-	if (set_led && led->led_on)
-		led->led_on(priv, IWL_LED_LINK);
-	return 0;
-}
-
-
-/*
- * calculate blink rate according to last 2 sec Tx/Rx activities
- */
-static inline u8 get_blink_rate(struct iwl_priv *priv)
-{
-	int index;
-	s64 tpt = priv->rxtxpackets;
-
-	if (tpt < 0)
-		tpt = -tpt;
-
-	IWL_DEBUG_LED(priv, "tpt %lld \n", (long long)tpt);
-
-	if (!priv->allow_blinking)
-		index = IWL_MAX_BLINK_TBL;
-	else
-		for (index = 0; index < IWL_MAX_BLINK_TBL; index++)
-			if (tpt > (blink_tbl[index].brightness * IWL_1MB_RATE))
-				break;
-
-	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", index);
-	return index;
-}
-
-/*
- * this function called from handler. Since setting Led command can
- * happen very frequent we postpone led command to be called from
- * REPLY handler so we know ucode is up
- */
-void iwl3945_led_background(struct iwl_priv *priv)
-{
-	u8 blink_idx;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		priv->last_blink_time = 0;
-		return;
-	}
-	if (iwl_is_rfkill(priv)) {
-		priv->last_blink_time = 0;
-		return;
-	}
-
-	if (!priv->allow_blinking) {
-		priv->last_blink_time = 0;
-		if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) {
-			priv->last_blink_rate = IWL_SOLID_BLINK_IDX;
-			iwl3945_led_pattern(priv, IWL_LED_LINK,
-					    IWL_SOLID_BLINK_IDX);
-		}
-		return;
-	}
-	if (!priv->last_blink_time ||
-	    !time_after(jiffies, priv->last_blink_time +
-			msecs_to_jiffies(1000)))
-		return;
-
-	blink_idx = get_blink_rate(priv);
-
-	/* call only if blink rate change */
-	if (blink_idx != priv->last_blink_rate)
-		iwl3945_led_pattern(priv, IWL_LED_LINK, blink_idx);
-
-	priv->last_blink_time = jiffies;
-	priv->last_blink_rate = blink_idx;
-	priv->rxtxpackets = 0;
-}
-
-
-/* Register all led handler */
-int iwl3945_led_register(struct iwl_priv *priv)
-{
-	char *trigger;
-	int ret;
-
-	priv->last_blink_rate = 0;
-	priv->rxtxpackets = 0;
-	priv->led_tpt = 0;
-	priv->last_blink_time = 0;
-	priv->allow_blinking = 0;
-
-	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
-		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
-		 wiphy_name(priv->hw->wiphy));
-
-	priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on;
-	priv->led[IWL_LED_TRG_RADIO].led_off = iwl3945_led_off;
-	priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1, trigger);
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
-		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s::assoc",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0, trigger);
-
-	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_associate;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_disassociate;
-	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RX].name,
-		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s::RX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_pattern = iwl3945_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_TX].name,
-		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s::TX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	return 0;
-
-exit_fail:
-	iwl3945_led_unregister(priv);
-	return ret;
-}
-
-
-/* unregister led class */
-static void iwl3945_led_unregister_led(struct iwl_led *led, u8 set_led)
-{
-	if (!led->registered)
-		return;
-
-	led_classdev_unregister(&led->led_dev);
-
-	if (set_led)
-		led->led_dev.brightness_set(&led->led_dev, LED_OFF);
-	led->registered = 0;
-}
-
-/* Unregister all led handlers */
-void iwl3945_led_unregister(struct iwl_priv *priv)
-{
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_ASSOC], 0);
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_RX], 0);
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_TX], 0);
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_RADIO], 1);
-}
-
-#endif
+const struct iwl_led_ops iwl3945_led_ops = {
+	.cmd = iwl3945_send_led_cmd,
+	.on = iwl3945_led_on,
+	.off = iwl3945_led_off,
+};
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
index 3b65642..5a1033c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
@@ -24,23 +24,9 @@
  *
  *****************************************************************************/
 
-#ifndef IWL3945_LEDS_H
-#define IWL3945_LEDS_H
+#ifndef __iwl_3945_led_h__
+#define __iwl_3945_led_h__
 
-struct iwl_priv;
+extern const struct iwl_led_ops iwl3945_led_ops;
 
-#ifdef CONFIG_IWLWIFI_LEDS
-
-#include "iwl-led.h"
-
-extern int iwl3945_led_register(struct iwl_priv *priv);
-extern void iwl3945_led_unregister(struct iwl_priv *priv);
-extern void iwl3945_led_background(struct iwl_priv *priv);
-
-#else
-static inline int iwl3945_led_register(struct iwl_priv *priv) { return 0; }
-static inline void iwl3945_led_unregister(struct iwl_priv *priv) {}
-static inline void iwl3945_led_background(struct iwl_priv *priv) {}
-
-#endif /* IWLWIFI_LEDS*/
-#endif /* IWL3945_LEDS_H */
+#endif /* __iwl_3945_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index cbb0585..d4b4988 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -42,38 +42,6 @@
 
 #define RS_NAME "iwl-3945-rs"
 
-struct iwl3945_rate_scale_data {
-	u64 data;
-	s32 success_counter;
-	s32 success_ratio;
-	s32 counter;
-	s32 average_tpt;
-	unsigned long stamp;
-};
-
-struct iwl3945_rs_sta {
-	spinlock_t lock;
-	struct iwl_priv *priv;
-	s32 *expected_tpt;
-	unsigned long last_partial_flush;
-	unsigned long last_flush;
-	u32 flush_time;
-	u32 last_tx_packets;
-	u32 tx_packets;
-	u8 tgg;
-	u8 flush_pending;
-	u8 start_rate;
-	u8 ibss_sta_added;
-	struct timer_list rate_scale_flush;
-	struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
-#ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *rs_sta_dbgfs_stats_table_file;
-#endif
-
-	/* used to be in sta_info */
-	int last_txrate_idx;
-};
-
 static s32 iwl3945_expected_tpt_g[IWL_RATE_COUNT_3945] = {
 	7, 13, 35, 58, 0, 0, 76, 104, 130, 168, 191, 202
 };
@@ -370,6 +338,28 @@
 
 	IWL_DEBUG_RATE(priv, "enter\n");
 
+	spin_lock_init(&rs_sta->lock);
+
+	rs_sta->priv = priv;
+
+	rs_sta->start_rate = IWL_RATE_INVALID;
+
+	/* default to just 802.11b */
+	rs_sta->expected_tpt = iwl3945_expected_tpt_b;
+
+	rs_sta->last_partial_flush = jiffies;
+	rs_sta->last_flush = jiffies;
+	rs_sta->flush_time = IWL_RATE_FLUSH;
+	rs_sta->last_tx_packets = 0;
+	rs_sta->ibss_sta_added = 0;
+
+	init_timer(&rs_sta->rate_scale_flush);
+	rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
+	rs_sta->rate_scale_flush.function = iwl3945_bg_rate_scale_flush;
+
+	for (i = 0; i < IWL_RATE_COUNT_3945; i++)
+		iwl3945_clear_window(&rs_sta->win[i]);
+
 	/* TODO: what is a good starting rate for STA? About middle? Maybe not
 	 * the lowest or the highest rate.. Could consider using RSSI from
 	 * previous packets? Need to have IEEE 802.1X auth succeed immediately
@@ -409,45 +399,11 @@
 {
 	struct iwl3945_rs_sta *rs_sta;
 	struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
-	struct iwl_priv *priv = iwl_priv;
-	int i;
-
-	/*
-	 * XXX: If it's using sta->drv_priv anyway, it might
-	 *	as well just put all the information there.
-	 */
+	struct iwl_priv *priv __maybe_unused = iwl_priv;
 
 	IWL_DEBUG_RATE(priv, "enter\n");
 
-	rs_sta = kzalloc(sizeof(struct iwl3945_rs_sta), gfp);
-	if (!rs_sta) {
-		IWL_DEBUG_RATE(priv, "leave: ENOMEM\n");
-		return NULL;
-	}
-
-	psta->rs_sta = rs_sta;
-
-	spin_lock_init(&rs_sta->lock);
-
-	rs_sta->priv = priv;
-
-	rs_sta->start_rate = IWL_RATE_INVALID;
-
-	/* default to just 802.11b */
-	rs_sta->expected_tpt = iwl3945_expected_tpt_b;
-
-	rs_sta->last_partial_flush = jiffies;
-	rs_sta->last_flush = jiffies;
-	rs_sta->flush_time = IWL_RATE_FLUSH;
-	rs_sta->last_tx_packets = 0;
-	rs_sta->ibss_sta_added = 0;
-
-	init_timer(&rs_sta->rate_scale_flush);
-	rs_sta->rate_scale_flush.data = (unsigned long)rs_sta;
-	rs_sta->rate_scale_flush.function = &iwl3945_bg_rate_scale_flush;
-
-	for (i = 0; i < IWL_RATE_COUNT_3945; i++)
-		iwl3945_clear_window(&rs_sta->win[i]);
+	rs_sta = &psta->rs_sta;
 
 	IWL_DEBUG_RATE(priv, "leave\n");
 
@@ -458,14 +414,11 @@
 			void *priv_sta)
 {
 	struct iwl3945_sta_priv *psta = (void *) sta->drv_priv;
-	struct iwl3945_rs_sta *rs_sta = priv_sta;
+	struct iwl3945_rs_sta *rs_sta = &psta->rs_sta;
 	struct iwl_priv *priv __maybe_unused = rs_sta->priv;
 
-	psta->rs_sta = NULL;
-
 	IWL_DEBUG_RATE(priv, "enter\n");
 	del_timer_sync(&rs_sta->rate_scale_flush);
-	kfree(rs_sta);
 	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
@@ -960,14 +913,15 @@
 
 	rcu_read_lock();
 
-	sta = ieee80211_find_sta(hw, priv->stations[sta_id].sta.sta.addr);
+	sta = ieee80211_find_sta(priv->vif,
+				 priv->stations[sta_id].sta.sta.addr);
 	if (!sta) {
 		rcu_read_unlock();
 		return;
 	}
 
 	psta = (void *) sta->drv_priv;
-	rs_sta = psta->rs_sta;
+	rs_sta = &psta->rs_sta;
 
 	spin_lock_irqsave(&rs_sta->lock, flags);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index f059b49..7da1dab 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -47,7 +47,8 @@
 #include "iwl-eeprom.h"
 #include "iwl-helpers.h"
 #include "iwl-core.h"
-#include "iwl-agn-rs.h"
+#include "iwl-led.h"
+#include "iwl-3945-led.h"
 
 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
 	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
@@ -293,7 +294,7 @@
 static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
 			    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -353,16 +354,12 @@
 void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
 		struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(struct iwl3945_notif_statistics),
 		     le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
 	memcpy(&priv->statistics_39, pkt->u.raw, sizeof(priv->statistics_39));
-
-	iwl3945_led_background(priv);
-
-	priv->last_statistics_time = jiffies;
 }
 
 /******************************************************************************
@@ -545,14 +542,18 @@
 				   struct iwl_rx_mem_buffer *rxb,
 				   struct ieee80211_rx_status *stats)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
-	short len = le16_to_cpu(rx_hdr->len);
+	u16 len = le16_to_cpu(rx_hdr->len);
+	struct sk_buff *skb;
+	int ret;
+	__le16 fc = hdr->frame_control;
 
 	/* We received data from the HW, so stop the watchdog */
-	if (unlikely((len + IWL39_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
+	if (unlikely(len + IWL39_RX_FRAME_SIZE >
+		     PAGE_SIZE << priv->hw_params.rx_page_order)) {
 		IWL_DEBUG_DROP(priv, "Corruption detected!\n");
 		return;
 	}
@@ -564,24 +565,50 @@
 		return;
 	}
 
-	skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
-	/* Set the size of the skb to the size of the frame */
-	skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
+	skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC);
+	if (!skb) {
+		IWL_ERR(priv, "alloc_skb failed\n");
+		return;
+	}
 
 	if (!iwl3945_mod_params.sw_crypto)
 		iwl_set_decrypted_flag(priv,
-				       (struct ieee80211_hdr *)rxb->skb->data,
+				       (struct ieee80211_hdr *)rxb_addr(rxb),
 				       le32_to_cpu(rx_end->status), stats);
 
-#ifdef CONFIG_IWLWIFI_LEDS
-	if (ieee80211_is_data(hdr->frame_control))
-		priv->rxtxpackets += len;
-#endif
-	iwl_update_stats(priv, false, hdr->frame_control, len);
+	skb_reserve(skb, IWL_LINK_HDR_MAX);
+	skb_add_rx_frag(skb, 0, rxb->page,
+			(void *)rx_hdr->payload - (void *)pkt, len);
 
-	memcpy(IEEE80211_SKB_RXCB(rxb->skb), stats, sizeof(*stats));
-	ieee80211_rx_irqsafe(priv->hw, rxb->skb);
-	rxb->skb = NULL;
+	/* mac80211 currently doesn't support paged SKB. Convert it to
+	 * linear SKB for management frame and data frame requires
+	 * software decryption or software defragementation. */
+	if (ieee80211_is_mgmt(fc) ||
+	    ieee80211_has_protected(fc) ||
+	    ieee80211_has_morefrags(fc) ||
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+		ret = skb_linearize(skb);
+	else
+		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
+			0 : -ENOMEM;
+
+	if (ret) {
+		kfree_skb(skb);
+		goto out;
+	}
+
+	/*
+	 * XXX: We cannot touch the page and its virtual memory (pkt) after
+	 * here. It might have already been freed by the above skb change.
+	 */
+
+	iwl_update_stats(priv, false, fc, len);
+	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+	ieee80211_rx(priv->hw, skb);
+ out:
+	priv->alloc_rxb_page--;
+	rxb->page = NULL;
 }
 
 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
@@ -591,7 +618,7 @@
 {
 	struct ieee80211_hdr *header;
 	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
@@ -791,29 +818,31 @@
 	u8 data_retry_limit;
 	__le32 tx_flags;
 	__le16 fc = hdr->frame_control;
-	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
 
 	rate = iwl3945_rates[rate_index].plcp;
-	tx_flags = tx->tx_flags;
+	tx_flags = tx_cmd->tx_flags;
 
 	/* We need to figure out how to get the sta->supp_rates while
 	 * in this running context */
 	rate_mask = IWL_RATES_MASK;
 
+
+	/* Set retry limit on DATA packets and Probe Responses*/
+	if (ieee80211_is_probe_resp(fc))
+		data_retry_limit = 3;
+	else
+		data_retry_limit = IWL_DEFAULT_TX_RETRY;
+	tx_cmd->data_retry_limit = data_retry_limit;
+
 	if (tx_id >= IWL_CMD_QUEUE_NUM)
 		rts_retry_limit = 3;
 	else
 		rts_retry_limit = 7;
 
-	if (ieee80211_is_probe_resp(fc)) {
-		data_retry_limit = 3;
-		if (data_retry_limit < rts_retry_limit)
-			rts_retry_limit = data_retry_limit;
-	} else
-		data_retry_limit = IWL_DEFAULT_TX_RETRY;
-
-	if (priv->data_retry_limit != -1)
-		data_retry_limit = priv->data_retry_limit;
+	if (data_retry_limit < rts_retry_limit)
+		rts_retry_limit = data_retry_limit;
+	tx_cmd->rts_retry_limit = rts_retry_limit;
 
 	if (ieee80211_is_mgmt(fc)) {
 		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
@@ -831,22 +860,20 @@
 		}
 	}
 
-	tx->rts_retry_limit = rts_retry_limit;
-	tx->data_retry_limit = data_retry_limit;
-	tx->rate = rate;
-	tx->tx_flags = tx_flags;
+	tx_cmd->rate = rate;
+	tx_cmd->tx_flags = tx_flags;
 
 	/* OFDM */
-	tx->supp_rates[0] =
+	tx_cmd->supp_rates[0] =
 	   ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
 
 	/* CCK */
-	tx->supp_rates[1] = (rate_mask & 0xF);
+	tx_cmd->supp_rates[1] = (rate_mask & 0xF);
 
 	IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 		       "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
-		       tx->rate, le32_to_cpu(tx->tx_flags),
-		       tx->supp_rates[1], tx->supp_rates[0]);
+		       tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
+		       tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
 }
 
 u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
@@ -962,6 +989,11 @@
 
 	iwl3945_hw_txq_ctx_free(priv);
 
+	/* allocate tx queue structure */
+	rc = iwl_alloc_txq_mem(priv);
+	if (rc)
+		return rc;
+
 	/* Tx CMD queue */
 	rc = iwl3945_tx_reset(priv);
 	if (rc)
@@ -986,41 +1018,25 @@
 	return rc;
 }
 
+
+/*
+ * Start up 3945's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via iwl_apm_stop())
+ * NOTE:  This does not load uCode nor start the embedded processor
+ */
 static int iwl3945_apm_init(struct iwl_priv *priv)
 {
-	int ret;
+	int ret = iwl_apm_init(priv);
 
-	iwl_power_initialize(priv);
+	/* Clear APMG (NIC's internal power management) interrupts */
+	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
+	iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
 
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+	/* Reset radio chip */
+	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
+	udelay(5);
+	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
 
-	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
-	/* set "initialization complete" bit to move adapter
-	* D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			    CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
-						APMG_CLK_VAL_BSM_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-out:
 	return ret;
 }
 
@@ -1145,12 +1161,16 @@
 	int txq_id;
 
 	/* Tx queues */
-	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
-		if (txq_id == IWL_CMD_QUEUE_NUM)
-			iwl_cmd_queue_free(priv);
-		else
-			iwl_tx_queue_free(priv, txq_id);
+	if (priv->txq)
+		for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
+		     txq_id++)
+			if (txq_id == IWL_CMD_QUEUE_NUM)
+				iwl_cmd_queue_free(priv);
+			else
+				iwl_tx_queue_free(priv, txq_id);
 
+	/* free tx queue structure */
+	iwl_free_txq_mem(priv);
 }
 
 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
@@ -1159,6 +1179,7 @@
 
 	/* stop SCD */
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
+	iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
 
 	/* reset TFD queues */
 	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
@@ -1171,85 +1192,6 @@
 	iwl3945_hw_txq_ctx_free(priv);
 }
 
-static int iwl3945_apm_stop_master(struct iwl_priv *priv)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* set stop master bit */
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-	iwl_poll_direct_bit(priv, CSR_RESET,
-			    CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-
-	if (ret < 0)
-		goto out;
-
-out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO(priv, "stop master\n");
-
-	return ret;
-}
-
-static void iwl3945_apm_stop(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl3945_apm_stop_master(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-	/* clear "init complete"  move adapter D0A* --> D0U state */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int iwl3945_apm_reset(struct iwl_priv *priv)
-{
-	iwl3945_apm_stop_master(priv);
-
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-	udelay(10);
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG,
-				APMG_CLK_VAL_BSM_CLK_RQT);
-
-	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
-	iwl_write_prph(priv, APMG_RTC_INT_STT_REG,
-					0xFFFFFFFF);
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG,
-				APMG_CLK_VAL_DMA_CLK_RQT |
-				APMG_CLK_VAL_BSM_CLK_RQT);
-	udelay(10);
-
-	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
-				APMG_PS_CTRL_VAL_RESET_REQ);
-	udelay(5);
-	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
-				APMG_PS_CTRL_VAL_RESET_REQ);
-
-	/* Clear the 'host command active' bit... */
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	return 0;
-}
-
 /**
  * iwl3945_hw_reg_adjust_power_by_temp
  * return index delta into power gain settings table
@@ -1858,7 +1800,7 @@
 static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
 {
 	int rc = 0;
-	struct iwl_rx_packet *res = NULL;
+	struct iwl_rx_packet *pkt;
 	struct iwl3945_rxon_assoc_cmd rxon_assoc;
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_RXON_ASSOC,
@@ -1887,14 +1829,14 @@
 	if (rc)
 		return rc;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
 		rc = -EIO;
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return rc;
 }
@@ -2042,12 +1984,6 @@
 	return 0;
 }
 
-/* will add 3945 channel switch cmd handling later */
-int iwl3945_hw_channel_switch(struct iwl_priv *priv, u16 channel)
-{
-	return 0;
-}
-
 /**
  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
  *
@@ -2557,11 +2493,10 @@
 	}
 
 	/* Assign number of Usable TX queues */
-	priv->hw_params.max_txq_num = IWL39_NUM_QUEUES;
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 
 	priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
-	priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_3K;
-	priv->hw_params.max_pkt_size = 2342;
+	priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
 	priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
 	priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
 	priv->hw_params.max_stations = IWL3945_STATION_COUNT;
@@ -2844,8 +2779,7 @@
 	.dump_nic_error_log = iwl3945_dump_nic_error_log,
 	.apm_ops = {
 		.init = iwl3945_apm_init,
-		.reset = iwl3945_apm_reset,
-		.stop = iwl3945_apm_stop,
+		.stop = iwl_apm_stop,
 		.config = iwl3945_nic_config,
 		.set_pwr_src = iwl3945_set_pwr_src,
 	},
@@ -2874,6 +2808,7 @@
 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
 	.get_hcmd_size = iwl3945_get_hcmd_size,
 	.build_addsta_hcmd = iwl3945_build_addsta_hcmd,
+	.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
 };
 
 static struct iwl_ops iwl3945_ops = {
@@ -2881,6 +2816,7 @@
 	.lib = &iwl3945_lib,
 	.hcmd = &iwl3945_hcmd,
 	.utils = &iwl3945_hcmd_utils,
+	.led = &iwl3945_led_ops,
 };
 
 static struct iwl_cfg iwl3945_bg_cfg = {
@@ -2892,9 +2828,14 @@
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
+	.num_of_queues = IWL39_NUM_QUEUES,
 	.mod_params = &iwl3945_mod_params,
+	.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
+	.set_l0s = false,
+	.use_bsm = true,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
+	.led_compensation = 64,
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2906,9 +2847,11 @@
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
+	.num_of_queues = IWL39_NUM_QUEUES,
 	.mod_params = &iwl3945_mod_params,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
+	.led_compensation = 64,
 };
 
 struct pci_device_id iwl3945_hw_card_ids[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 21679bf..ecc23ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -46,7 +46,7 @@
 #include "iwl-debug.h"
 #include "iwl-power.h"
 #include "iwl-dev.h"
-#include "iwl-3945-led.h"
+#include "iwl-led.h"
 
 /* Highest firmware API version supported */
 #define IWL3945_UCODE_API_MAX 2
@@ -74,8 +74,41 @@
 /* Module parameters accessible from iwl-*.c */
 extern struct iwl_mod_params iwl3945_mod_params;
 
+struct iwl3945_rate_scale_data {
+	u64 data;
+	s32 success_counter;
+	s32 success_ratio;
+	s32 counter;
+	s32 average_tpt;
+	unsigned long stamp;
+};
+
+struct iwl3945_rs_sta {
+	spinlock_t lock;
+	struct iwl_priv *priv;
+	s32 *expected_tpt;
+	unsigned long last_partial_flush;
+	unsigned long last_flush;
+	u32 flush_time;
+	u32 last_tx_packets;
+	u32 tx_packets;
+	u8 tgg;
+	u8 flush_pending;
+	u8 start_rate;
+	u8 ibss_sta_added;
+	struct timer_list rate_scale_flush;
+	struct iwl3945_rate_scale_data win[IWL_RATE_COUNT_3945];
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+#endif
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+};
+
+
 struct iwl3945_sta_priv {
-	struct iwl3945_rs_sta *rs_sta;
+	struct iwl3945_rs_sta rs_sta;
 };
 
 enum iwl3945_antenna {
@@ -130,12 +163,6 @@
 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
 
-/*
- * RX related structures and functions
- */
-#define RX_FREE_BUFFERS 64
-#define RX_LOW_WATERMARK 8
-
 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
@@ -194,22 +221,13 @@
  * for use by iwl-*.c
  *
  *****************************************************************************/
-extern int iwl3945_power_init_handle(struct iwl_priv *priv);
-extern int iwl3945_eeprom_init(struct iwl_priv *priv);
 extern int iwl3945_calc_db_from_ratio(int sig_ratio);
 extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
-extern int iwl3945_tx_queue_init(struct iwl_priv *priv,
-			     struct iwl_tx_queue *txq, int count, u32 id);
 extern void iwl3945_rx_replenish(void *data);
 extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
-extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq);
-extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len,
-			    const void *data);
-extern int __must_check iwl3945_send_cmd(struct iwl_priv *priv,
-					 struct iwl_host_cmd *cmd);
 extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
 					struct ieee80211_hdr *hdr,int left);
-extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv);
+extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log);
 extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
 
 /*
@@ -280,8 +298,6 @@
  */
 extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid);
 
-extern int iwl3945_hw_channel_switch(struct iwl_priv *priv, u16 channel);
-
 /*
  * Forward declare iwl-3945.c functions for iwl-base.c
  */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
index b34322a..c606366 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -76,12 +76,9 @@
 
 /*
  * uCode queue management definitions ...
- * Queue #4 is the command queue for 3945 and 4965; map it to Tx FIFO chnl 4.
  * The first queue used for block-ack aggregation is #7 (4965 only).
  * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
  */
-#define IWL_CMD_QUEUE_NUM       4
-#define IWL_CMD_FIFO_NUM        4
 #define IWL49_FIRST_AMPDU_QUEUE	7
 
 /* Time constants */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 6f703a0..386513b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -45,6 +45,7 @@
 #include "iwl-helpers.h"
 #include "iwl-calib.h"
 #include "iwl-sta.h"
+#include "iwl-agn-led.h"
 
 static int iwl4965_send_tx_power(struct iwl_priv *priv);
 static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
@@ -62,8 +63,6 @@
 
 /* module parameters */
 static struct iwl_mod_params iwl4965_mod_params = {
-	.num_of_queues = IWL49_NUM_QUEUES,
-	.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
 	.amsdu_size_8K = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
@@ -319,63 +318,13 @@
 	iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
 }
 
-static int iwl4965_apm_init(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
-	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
-	/* set "initialization complete" bit to move adapter
-	 * D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	/* wait for clock stabilization */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
-						APMG_CLK_VAL_BSM_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-out:
-	return ret;
-}
-
-
 static void iwl4965_nic_config(struct iwl_priv *priv)
 {
 	unsigned long flags;
 	u16 radio_cfg;
-	u16 lctl;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	lctl = iwl_pcie_link_ctl(priv);
-
-	/* HW bug W/A - negligible power consumption */
-	/* L1-ASPM is enabled by BIOS */
-	if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
-		/* L1-ASPM enabled: disable L0S  */
-		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-	else
-		/* L1-ASPM disabled: enable L0S */
-		iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-
 	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 
 	/* write radio config values to register */
@@ -396,79 +345,6 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int iwl4965_apm_stop_master(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* set stop master bit */
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-	iwl_poll_direct_bit(priv, CSR_RESET,
-			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO(priv, "stop master\n");
-
-	return 0;
-}
-
-static void iwl4965_apm_stop(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl4965_apm_stop_master(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-	/* clear "init complete"  move adapter D0A* --> D0U state */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int iwl4965_apm_reset(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl4965_apm_stop_master(priv);
-
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-
-	/* FIXME: put here L1A -L0S w/a */
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0)
-		goto out;
-
-	udelay(10);
-
-	/* Enable DMA and BSM Clock */
-	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
-					      APMG_CLK_VAL_BSM_CLK_RQT);
-
-	udelay(10);
-
-	/* disable L1A */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-	wake_up_interruptible(&priv->wait_command_queue);
-
-out:
-	return ret;
-}
-
 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
  * Called after every association, but this runs only once!
  *  ... once chain noise is calibrated the first time, it's good forever.  */
@@ -496,14 +372,15 @@
 static void iwl4965_gain_computation(struct iwl_priv *priv,
 		u32 *average_noise,
 		u16 min_average_noise_antenna_i,
-		u32 min_average_noise)
+		u32 min_average_noise,
+		u8 default_chain)
 {
 	int i, ret;
 	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 
 	data->delta_gain_code[min_average_noise_antenna_i] = 0;
 
-	for (i = 0; i < NUM_RX_CHAINS; i++) {
+	for (i = default_chain; i < NUM_RX_CHAINS; i++) {
 		s32 delta_g = 0;
 
 		if (!(data->disconn_array[i]) &&
@@ -557,18 +434,6 @@
 	data->beacon_count = 0;
 }
 
-static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
-			__le32 *tx_flags)
-{
-	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		*tx_flags |= TX_CMD_FLG_RTS_MSK;
-		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
-	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-		*tx_flags |= TX_CMD_FLG_CTS_MSK;
-	}
-}
-
 static void iwl4965_bg_txpower_work(struct work_struct *work)
 {
 	struct iwl_priv *priv = container_of(work, struct iwl_priv,
@@ -663,7 +528,8 @@
 		iwl_write_targ_mem(priv, a, 0);
 	for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
 		iwl_write_targ_mem(priv, a, 0);
-	for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
+	for (; a < priv->scd_base_addr +
+	       IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
 		iwl_write_targ_mem(priv, a, 0);
 
 	/* Tel 4965 where to find Tx byte count tables */
@@ -748,6 +614,10 @@
 
 	.nrg_th_cck = 100,
 	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
 };
 
 static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
@@ -764,19 +634,16 @@
  */
 static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 {
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
 
-	if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
-	    (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
-		IWL_ERR(priv,
-			"invalid queues_num, should be between %d and %d\n",
-			IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
-		return -EINVAL;
-	}
-
-	priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 	priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
 	priv->hw_params.scd_bc_tbls_size =
-			IWL49_NUM_QUEUES * sizeof(struct iwl4965_scd_bc_tbl);
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl4965_scd_bc_tbl);
 	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 	priv->hw_params.max_stations = IWL4965_STATION_COUNT;
 	priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
@@ -787,10 +654,10 @@
 
 	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 
-	priv->hw_params.tx_chains_num = 2;
-	priv->hw_params.rx_chains_num = 2;
-	priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
-	priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
+	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
 		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 
@@ -1567,14 +1434,13 @@
 	return ret;
 }
 
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
 static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 {
 	int rc;
 	u8 band = 0;
 	bool is_ht40 = false;
 	u8 ctrl_chan_high = 0;
-	struct iwl4965_channel_switch_cmd cmd = { 0 };
+	struct iwl4965_channel_switch_cmd cmd;
 	const struct iwl_channel_info *ch_info;
 
 	band = priv->band == IEEE80211_BAND_2GHZ;
@@ -1584,19 +1450,22 @@
 	is_ht40 = is_ht40_channel(priv->staging_rxon.flags);
 
 	if (is_ht40 &&
-	    (priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
+	    (priv->staging_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
 		ctrl_chan_high = 1;
 
 	cmd.band = band;
 	cmd.expect_beacon = 0;
 	cmd.channel = cpu_to_le16(channel);
-	cmd.rxon_flags = priv->active_rxon.flags;
-	cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
+	cmd.rxon_flags = priv->staging_rxon.flags;
+	cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
 	cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
 	if (ch_info)
 		cmd.expect_beacon = is_channel_radar(ch_info);
-	else
-		cmd.expect_beacon = 1;
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			priv->active_rxon.channel, channel);
+		return -EFAULT;
+	}
 
 	rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_ht40,
 				      ctrl_chan_high, &cmd.tx_power);
@@ -1605,10 +1474,11 @@
 		return rc;
 	}
 
-	rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
-	return rc;
+	priv->switch_rxon.channel = cpu_to_le16(channel);
+	priv->switch_rxon.switch_in_progress = true;
+
+	return iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
 }
-#endif
 
 /**
  * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
@@ -1805,11 +1675,13 @@
 				   u16 ssn_idx, u8 tx_fifo)
 {
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL49_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_WARN(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL49_FIRST_AMPDU_QUEUE,
-			IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
+			IWL49_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1870,11 +1742,13 @@
 	u16 ra_tid;
 
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL49_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_WARN(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL49_FIRST_AMPDU_QUEUE,
-			IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
+			IWL49_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1944,8 +1818,9 @@
 	addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
 	addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
 	addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
+	addsta->sleep_tx_count = cmd->sleep_tx_count;
 	addsta->reserved1 = cpu_to_le16(0);
-	addsta->reserved2 = cpu_to_le32(0);
+	addsta->reserved2 = cpu_to_le16(0);
 
 	return (u16)sizeof(struct iwl4965_addsta_cmd);
 }
@@ -1991,8 +1866,7 @@
 		info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
 		info->status.rates[0].count = tx_resp->failure_frame + 1;
 		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
-		info->flags |= iwl_is_tx_success(status) ?
-			IEEE80211_TX_STAT_ACK : 0;
+		info->flags |= iwl_tx_status_to_mac80211(status);
 		iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
 		/* FIXME: code repetition end */
 
@@ -2078,7 +1952,7 @@
 static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -2147,8 +2021,7 @@
 		}
 	} else {
 		info->status.rates[0].count = tx_resp->failure_frame + 1;
-		info->flags |= iwl_is_tx_success(status) ?
-					IEEE80211_TX_STAT_ACK : 0;
+		info->flags |= iwl_tx_status_to_mac80211(status);
 		iwl_hwrate_to_tx_control(priv,
 					le32_to_cpu(tx_resp->rate_n_flags),
 					info);
@@ -2279,7 +2152,7 @@
 	.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
 	.chain_noise_reset = iwl4965_chain_noise_reset,
 	.gain_computation = iwl4965_gain_computation,
-	.rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
+	.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
 	.calc_rssi = iwl4965_calc_rssi,
 };
 
@@ -2301,10 +2174,10 @@
 	.load_ucode = iwl4965_load_bsm,
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.set_channel_switch = iwl4965_hw_channel_switch,
 	.apm_ops = {
-		.init = iwl4965_apm_init,
-		.reset = iwl4965_apm_reset,
-		.stop = iwl4965_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl4965_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -2340,6 +2213,7 @@
 	.lib = &iwl4965_lib,
 	.hcmd = &iwl4965_hcmd,
 	.utils = &iwl4965_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 struct iwl_cfg iwl4965_agn_cfg = {
@@ -2352,30 +2226,41 @@
 	.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
 	.ops = &iwl4965_ops,
+	.num_of_queues = IWL49_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl4965_mod_params,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_ABC,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = true,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
 	.broken_powersave = true,
+	.led_compensation = 61,
+	.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 /* Module firmware */
 MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
 
-module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
+module_param_named(antenna, iwl4965_mod_params.antenna, int, S_IRUGO);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
+module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, S_IRUGO);
 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
 module_param_named(
-	disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
+	disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, S_IRUGO);
 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
 
-module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
+module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, S_IRUGO);
 MODULE_PARM_DESC(queues_num, "number of hw queues.");
 /* 11n */
-module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
+module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, S_IRUGO);
 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
+module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K,
+		   int, S_IRUGO);
 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
 
-module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
+module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 6e6f516..e2f8615 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -43,6 +43,7 @@
 #include "iwl-io.h"
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
+#include "iwl-agn-led.h"
 #include "iwl-5000-hw.h"
 #include "iwl-6000-hw.h"
 
@@ -72,157 +73,18 @@
 	IWL_TX_FIFO_HCCA_2
 };
 
-/* FIXME: same implementation as 4965 */
-static int iwl5000_apm_stop_master(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* set stop master bit */
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-	iwl_poll_direct_bit(priv, CSR_RESET,
-				  CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO(priv, "stop master\n");
-
-	return 0;
-}
-
-
-int iwl5000_apm_init(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-		    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
-	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-		    CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
-	/* Set FH wait threshold to maximum (HW error during stress W/A) */
-	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
-
-	/* enable HAP INTA to move device L1a -> L0s */
-	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-		    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
-
-	if (priv->cfg->need_pll_cfg)
-		iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
-
-	/* set "initialization complete" bit to move adapter
-	 * D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	/* wait for clock stabilization */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		return ret;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-	return ret;
-}
-
-/* FIXME: this is identical to 4965 */
-void iwl5000_apm_stop(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl5000_apm_stop_master(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-
-	/* clear "init complete"  move adapter D0A* --> D0U state */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-
-int iwl5000_apm_reset(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl5000_apm_stop_master(priv);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-
-
-	/* FIXME: put here L1A -L0S w/a */
-
-	if (priv->cfg->need_pll_cfg)
-		iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
-
-	/* set "initialization complete" bit to move adapter
-	 * D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	/* wait for clock stabilization */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-out:
-
-	return ret;
-}
-
-
-/* NIC configuration for 5000 series and up */
+/* NIC configuration for 5000 series */
 void iwl5000_nic_config(struct iwl_priv *priv)
 {
 	unsigned long flags;
 	u16 radio_cfg;
-	u16 lctl;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	lctl = iwl_pcie_link_ctl(priv);
-
-	/* HW bug W/A */
-	/* L1-ASPM is enabled by BIOS */
-	if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
-		/* L1-APSM enabled: disable L0S  */
-		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-	else
-		/* L1-ASPM disabled: enable L0S */
-		iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-
 	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 
 	/* write radio config values to register */
-	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_5000_RF_CFG_TYPE_MAX)
+	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_RF_CONFIG_TYPE_MAX)
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 			    EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
@@ -302,19 +164,22 @@
 static void iwl5000_gain_computation(struct iwl_priv *priv,
 		u32 average_noise[NUM_RX_CHAINS],
 		u16 min_average_noise_antenna_i,
-		u32 min_average_noise)
+		u32 min_average_noise,
+		u8 default_chain)
 {
 	int i;
 	s32 delta_g;
 	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 
-	/* Find Gain Code for the antennas B and C */
-	for (i = 1; i < NUM_RX_CHAINS; i++) {
+	/*
+	 * Find Gain Code for the chains based on "default chain"
+	 */
+	for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) {
 		if ((data->disconn_array[i])) {
 			data->delta_gain_code[i] = 0;
 			continue;
 		}
-		delta_g = (1000 * ((s32)average_noise[0] -
+		delta_g = (1000 * ((s32)average_noise[default_chain] -
 			(s32)average_noise[i])) / 1500;
 		/* bound gain by 2 bits value max, 3rd bit is sign */
 		data->delta_gain_code[i] =
@@ -407,6 +272,10 @@
 	.auto_corr_max_cck_mrc = 400,
 	.nrg_th_cck = 95,
 	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
 };
 
 static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
@@ -429,6 +298,10 @@
 	.auto_corr_max_cck_mrc = 400,
 	.nrg_th_cck = 95,
 	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
 };
 
 const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
@@ -493,7 +366,7 @@
 static void iwl5000_rx_calib_result(struct iwl_priv *priv,
 			     struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw;
 	int len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
 	int index;
@@ -719,16 +592,6 @@
 		       scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
 }
 
-static int iwl5000_send_wimax_coex(struct iwl_priv *priv)
-{
-	struct iwl_wimax_coex_cmd coex_cmd;
-
-	memset(&coex_cmd, 0, sizeof(coex_cmd));
-
-	return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD,
-				sizeof(coex_cmd), &coex_cmd);
-}
-
 int iwl5000_alive_notify(struct iwl_priv *priv)
 {
 	u32 a;
@@ -746,7 +609,8 @@
 	for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET;
 		a += 4)
 		iwl_write_targ_mem(priv, a, 0);
-	for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
+	for (; a < priv->scd_base_addr +
+	       IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
 		iwl_write_targ_mem(priv, a, 0);
 
 	iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR,
@@ -798,9 +662,13 @@
 		iwl_txq_ctx_activate(priv, i);
 		iwl5000_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
 	}
-	/* TODO - need to initialize those FIFOs inside the loop above,
-	 * not only mark them as active */
-	iwl_txq_ctx_activate(priv, 4);
+
+	/*
+	 * TODO - need to initialize these queues and map them to FIFOs
+	 * in the loop above, not only mark them as active. We do this
+	 * because we want the first aggregation queue to be queue #10,
+	 * but do not use 8 or 9 otherwise yet.
+	 */
 	iwl_txq_ctx_activate(priv, 7);
 	iwl_txq_ctx_activate(priv, 8);
 	iwl_txq_ctx_activate(priv, 9);
@@ -808,7 +676,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 
-	iwl5000_send_wimax_coex(priv);
+	iwl_send_wimax_coex(priv);
 
 	iwl5000_set_Xtal_calib(priv);
 	iwl_send_calib_results(priv);
@@ -818,32 +686,22 @@
 
 int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 {
-	if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) ||
-	    (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
-		IWL_ERR(priv,
-			"invalid queues_num, should be between %d and %d\n",
-			IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES);
-		return -EINVAL;
-	}
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
 
-	priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 	priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
 	priv->hw_params.scd_bc_tbls_size =
-			IWL50_NUM_QUEUES * sizeof(struct iwl5000_scd_bc_tbl);
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl5000_scd_bc_tbl);
 	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 	priv->hw_params.max_stations = IWL5000_STATION_COUNT;
 	priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_6x00:
-	case CSR_HW_REV_TYPE_6x50:
-		priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
-		priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
-		break;
-	default:
-		priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
-		priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
-	}
+	priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
+	priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
 
 	priv->hw_params.max_bsm_size = 0;
 	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
@@ -989,11 +847,13 @@
 	u16 ra_tid;
 
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL50_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_WARN(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL50_FIRST_AMPDU_QUEUE,
-			IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
+			IWL50_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1047,11 +907,13 @@
 				   u16 ssn_idx, u8 tx_fifo)
 {
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL50_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_ERR(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL50_FIRST_AMPDU_QUEUE,
-			IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
+			IWL50_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1132,8 +994,7 @@
 		info = IEEE80211_SKB_CB(priv->txq[txq_id].txb[idx].skb[0]);
 		info->status.rates[0].count = tx_resp->failure_frame + 1;
 		info->flags &= ~IEEE80211_TX_CTL_AMPDU;
-		info->flags |= iwl_is_tx_success(status) ?
-					IEEE80211_TX_STAT_ACK : 0;
+		info->flags |= iwl_tx_status_to_mac80211(status);
 		iwl_hwrate_to_tx_control(priv, rate_n_flags, info);
 
 		/* FIXME: code repetition end */
@@ -1218,7 +1079,7 @@
 static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -1278,8 +1139,7 @@
 		BUG_ON(txq_id != txq->swq_id);
 
 		info->status.rates[0].count = tx_resp->failure_frame + 1;
-		info->flags |= iwl_is_tx_success(status) ?
-					IEEE80211_TX_STAT_ACK : 0;
+		info->flags |= iwl_tx_status_to_mac80211(status);
 		iwl_hwrate_to_tx_control(priv,
 					le32_to_cpu(tx_resp->rate_n_flags),
 					info);
@@ -1389,6 +1249,22 @@
 
 	/* half dBm need to multiply */
 	tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
+
+	if (priv->tx_power_lmt_in_half_dbm &&
+	    priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
+		/*
+		 * For the newer devices which using enhanced/extend tx power
+		 * table in EEPROM, the format is in half dBm. driver need to
+		 * convert to dBm format before report to mac80211.
+		 * By doing so, there is a possibility of 1/2 dBm resolution
+		 * lost. driver will perform "round-up" operation before
+		 * reporting, but it will cause 1/2 dBm tx power over the
+		 * regulatory limit. Perform the checking here, if the
+		 * "tx_power_user_lmt" is higher than EEPROM value (in
+		 * half-dBm format), lower the tx power based on EEPROM
+		 */
+		tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
+	}
 	tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
 	tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
 
@@ -1459,6 +1335,24 @@
 	return max_rssi - agc - IWL49_RSSI_OFFSET;
 }
 
+static int iwl5000_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
+{
+	struct iwl_tx_ant_config_cmd tx_ant_cmd = {
+	  .valid = cpu_to_le32(valid_tx_ant),
+	};
+
+	if (IWL_UCODE_API(priv->ucode_ver) > 1) {
+		IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
+		return iwl_send_cmd_pdu(priv, TX_ANT_CONFIGURATION_CMD,
+					sizeof(struct iwl_tx_ant_config_cmd),
+					&tx_ant_cmd);
+	} else {
+		IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
+		return -EOPNOTSUPP;
+	}
+}
+
+
 #define IWL5000_UCODE_GET(item)						\
 static u32 iwl5000_ucode_get_##item(const struct iwl_ucode_header *ucode,\
 				    u32 api_ver)			\
@@ -1497,10 +1391,43 @@
 IWL5000_UCODE_GET(init_data_size);
 IWL5000_UCODE_GET(boot_size);
 
+static int iwl5000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+{
+	struct iwl5000_channel_switch_cmd cmd;
+	const struct iwl_channel_info *ch_info;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = sizeof(cmd),
+		.flags = CMD_SIZE_HUGE,
+		.data = &cmd,
+	};
+
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		priv->active_rxon.channel, channel);
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	cmd.channel = cpu_to_le16(channel);
+	cmd.rxon_flags = priv->staging_rxon.flags;
+	cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
+	cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	ch_info = iwl_get_channel_info(priv, priv->band, channel);
+	if (ch_info)
+		cmd.expect_beacon = is_channel_radar(ch_info);
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			priv->active_rxon.channel, channel);
+		return -EFAULT;
+	}
+	priv->switch_rxon.channel = cpu_to_le16(channel);
+	priv->switch_rxon.switch_in_progress = true;
+
+	return iwl_send_cmd_sync(priv, &hcmd);
+}
+
 struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
 	.commit_rxon = iwl_commit_rxon,
 	.set_rxon_chain = iwl_set_rxon_chain,
+	.set_tx_ant = iwl5000_send_tx_ant_config,
 };
 
 struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
@@ -1543,10 +1470,10 @@
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl5000_hw_channel_switch,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl5000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -1595,10 +1522,10 @@
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl5000_hw_channel_switch,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl5000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -1627,11 +1554,12 @@
 	 },
 };
 
-struct iwl_ops iwl5000_ops = {
+static struct iwl_ops iwl5000_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl5000_lib,
 	.hcmd = &iwl5000_hcmd,
 	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 static struct iwl_ops iwl5150_ops = {
@@ -1639,11 +1567,10 @@
 	.lib = &iwl5150_lib,
 	.hcmd = &iwl5000_hcmd,
 	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 struct iwl_mod_params iwl50_mod_params = {
-	.num_of_queues = IWL50_NUM_QUEUES,
-	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.amsdu_size_8K = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
@@ -1660,28 +1587,41 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
-struct iwl_cfg iwl5100_bg_cfg = {
-	.name = "5100BG",
+struct iwl_cfg iwl5100_bgn_cfg = {
+	.name = "5100BGN",
 	.fw_name_pre = IWL5000_FW_PRE,
 	.ucode_api_max = IWL5000_UCODE_API_MAX,
 	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
+	.sku = IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl5000_ops,
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_B,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
@@ -1694,11 +1634,16 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_B,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
-	.ht_greenfield_support = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
@@ -1711,11 +1656,18 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_B,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -1728,11 +1680,18 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 struct iwl_cfg iwl5150_agn_cfg = {
@@ -1745,24 +1704,54 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_A,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
+};
+
+struct iwl_cfg iwl5150_abg_cfg = {
+	.name = "5150ABG",
+	.fw_name_pre = IWL5150_FW_PRE,
+	.ucode_api_max = IWL5150_UCODE_API_MAX,
+	.ucode_api_min = IWL5150_UCODE_API_MIN,
+	.sku = IWL_SKU_A|IWL_SKU_G,
+	.ops = &iwl5150_ops,
+	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_A,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
 
-module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
+module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, S_IRUGO);
 MODULE_PARM_DESC(swcrypto50,
 		  "using software crypto engine (default 0 [hardware])\n");
-module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444);
+module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, S_IRUGO);
 MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
-module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444);
+module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, S_IRUGO);
 MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality");
-module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444);
+module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K,
+		   int, S_IRUGO);
 MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series");
-module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, 0444);
+module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart50, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 1473452..74e5710 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -44,14 +44,16 @@
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
 #include "iwl-5000-hw.h"
+#include "iwl-6000-hw.h"
+#include "iwl-agn-led.h"
 
 /* Highest firmware API version supported */
 #define IWL6000_UCODE_API_MAX 4
 #define IWL6050_UCODE_API_MAX 4
 
 /* Lowest firmware API version supported */
-#define IWL6000_UCODE_API_MIN 1
-#define IWL6050_UCODE_API_MIN 1
+#define IWL6000_UCODE_API_MIN 4
+#define IWL6050_UCODE_API_MIN 4
 
 #define IWL6000_FW_PRE "iwlwifi-6000-"
 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
@@ -71,14 +73,24 @@
 /* NIC configuration for 6000 series */
 static void iwl6000_nic_config(struct iwl_priv *priv)
 {
-	iwl5000_nic_config(priv);
+	u16 radio_cfg;
+
+	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
+
+	/* write radio config values to register */
+	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
+		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+			    EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
+			    EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
+			    EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
 	/* no locking required for register write */
-	if (priv->cfg->pa_type == IWL_PA_HYBRID) {
-		/* 2x2 hybrid phy type */
-		iwl_write32(priv, CSR_GP_DRIVER_REG,
-			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_HYB);
-	} else if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
+	if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
 		/* 2x2 IPA phy type */
 		iwl_write32(priv, CSR_GP_DRIVER_REG,
 			     CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
@@ -86,8 +98,109 @@
 	/* else do nothing, uCode configured */
 }
 
+static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+	.min_nrg_cck = 97,
+	.max_nrg_cck = 0, /* not used, set to 0 */
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 145,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 97,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
+
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
+	priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+	priv->hw_params.scd_bc_tbls_size =
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl5000_scd_bc_tbl);
+	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+	priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+	priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+	priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+	priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+
+	priv->hw_params.max_bsm_size = 0;
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+					BIT(IEEE80211_BAND_5GHZ);
+	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+	/* Set initial sensitivity parameters */
+	/* Set initial calibration set */
+	priv->hw_params.sens = &iwl6000_sensitivity;
+	priv->hw_params.calib_init_cfg =
+			BIT(IWL_CALIB_XTAL)		|
+			BIT(IWL_CALIB_LO)		|
+			BIT(IWL_CALIB_TX_IQ) 		|
+			BIT(IWL_CALIB_BASE_BAND);
+	return 0;
+}
+
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+{
+	struct iwl6000_channel_switch_cmd cmd;
+	const struct iwl_channel_info *ch_info;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = sizeof(cmd),
+		.flags = CMD_SIZE_HUGE,
+		.data = &cmd,
+	};
+
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		priv->active_rxon.channel, channel);
+
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	cmd.channel = cpu_to_le16(channel);
+	cmd.rxon_flags = priv->staging_rxon.flags;
+	cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
+	cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	ch_info = iwl_get_channel_info(priv, priv->band, channel);
+	if (ch_info)
+		cmd.expect_beacon = is_channel_radar(ch_info);
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			priv->active_rxon.channel, channel);
+		return -EFAULT;
+	}
+	priv->switch_rxon.channel = cpu_to_le16(channel);
+	priv->switch_rxon.switch_in_progress = true;
+
+	return iwl_send_cmd_sync(priv, &hcmd);
+}
+
 static struct iwl_lib_ops iwl6000_lib = {
-	.set_hw_params = iwl5000_hw_set_hw_params,
+	.set_hw_params = iwl6000_hw_set_hw_params,
 	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwl5000_txq_set_sched,
@@ -106,10 +219,10 @@
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl6000_hw_channel_switch,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl6000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -139,43 +252,27 @@
 	 },
 };
 
-static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
+static struct iwl_ops iwl6000_ops = {
+	.ucode = &iwl5000_ucode,
+	.lib = &iwl6000_lib,
+	.hcmd = &iwl5000_hcmd,
+	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
+};
+
+static struct iwl_hcmd_utils_ops iwl6050_hcmd_utils = {
 	.get_hcmd_size = iwl5000_get_hcmd_size,
 	.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
 	.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
 	.calc_rssi = iwl5000_calc_rssi,
 };
 
-static struct iwl_ops iwl6000_ops = {
+static struct iwl_ops iwl6050_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl6000_lib,
 	.hcmd = &iwl5000_hcmd,
-	.utils = &iwl6000_hcmd_utils,
-};
-
-
-/*
- * "h": Hybrid configuration, use both internal and external Power Amplifier
- */
-struct iwl_cfg iwl6000h_2agn_cfg = {
-	.name = "6000 Series 2x2 AGN",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6000_ops,
-	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.mod_params = &iwl50_mod_params,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = false,
-	.pa_type = IWL_PA_HYBRID,
-	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
-	.shadow_ram_support = true,
-	.ht_greenfield_support = true,
-	.use_rts_for_ht = true, /* use rts/cts protection */
+	.utils = &iwl6050_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 /*
@@ -189,17 +286,85 @@
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_BC,
 	.valid_rx_ant = ANT_BC,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = false,
 	.pa_type = IWL_PA_INTERNAL,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
+};
+
+struct iwl_cfg iwl6000i_2abg_cfg = {
+	.name = "6000 Series 2x2 ABG",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.sku = IWL_SKU_A|IWL_SKU_G,
+	.ops = &iwl6000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = false,
+	.pa_type = IWL_PA_INTERNAL,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+};
+
+struct iwl_cfg iwl6000i_2bg_cfg = {
+	.name = "6000 Series 2x2 BG",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.sku = IWL_SKU_G,
+	.ops = &iwl6000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = false,
+	.pa_type = IWL_PA_INTERNAL,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -208,19 +373,58 @@
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6000_ops,
+	.ops = &iwl6050_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
-	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DYNAMIC,
+};
+
+struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "6050 Series 2x2 ABG",
+	.fw_name_pre = IWL6050_FW_PRE,
+	.ucode_api_max = IWL6050_UCODE_API_MAX,
+	.ucode_api_min = IWL6050_UCODE_API_MIN,
+	.sku = IWL_SKU_A|IWL_SKU_G,
+	.ops = &iwl6050_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = false,
+	.pa_type = IWL_PA_SYSTEM,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -231,38 +435,27 @@
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
 	.use_rts_for_ht = true, /* use rts/cts protection */
-};
-
-struct iwl_cfg iwl6050_3agn_cfg = {
-	.name = "6050 Series 3x3 AGN",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6000_ops,
-	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.mod_params = &iwl50_mod_params,
-	.valid_tx_ant = ANT_ABC,
-	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = false,
-	.pa_type = IWL_PA_SYSTEM,
-	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
-	.shadow_ram_support = true,
-	.ht_greenfield_support = true,
-	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+	.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.c b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
new file mode 100644
index 0000000..3bccba2
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
@@ -0,0 +1,85 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+
+#include "iwl-commands.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-agn-led.h"
+
+/* Send led command */
+static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_LEDS_CMD,
+		.len = sizeof(struct iwl_led_cmd),
+		.data = led_cmd,
+		.flags = CMD_ASYNC,
+		.callback = NULL,
+	};
+	u32 reg;
+
+	reg = iwl_read32(priv, CSR_LED_REG);
+	if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
+		iwl_write32(priv, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
+
+	return iwl_send_cmd(priv, &cmd);
+}
+
+/* Set led register off */
+static int iwl_led_on_reg(struct iwl_priv *priv)
+{
+	IWL_DEBUG_LED(priv, "led on\n");
+	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
+	return 0;
+}
+
+/* Set led register off */
+static int iwl_led_off_reg(struct iwl_priv *priv)
+{
+	IWL_DEBUG_LED(priv, "LED Reg off\n");
+	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
+	return 0;
+}
+
+const struct iwl_led_ops iwlagn_led_ops = {
+	.cmd = iwl_send_led_cmd,
+	.on = iwl_led_on_reg,
+	.off = iwl_led_off_reg,
+};
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.h b/drivers/net/wireless/iwlwifi/iwl-agn-led.h
new file mode 100644
index 0000000..ab55f92
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-led.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __iwl_agn_led_h__
+#define __iwl_agn_led_h__
+
+extern const struct iwl_led_ops iwlagn_led_ops;
+
+#endif /* __iwl_agn_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 81726ee..fe511cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -75,104 +75,6 @@
 	/*ANT_ABC  -> */ ANT_ABC,
 };
 
-/**
- * struct iwl_rate_scale_data -- tx success history for one rate
- */
-struct iwl_rate_scale_data {
-	u64 data;		/* bitmap of successful frames */
-	s32 success_counter;	/* number of frames successful */
-	s32 success_ratio;	/* per-cent * 128  */
-	s32 counter;		/* number of frames attempted */
-	s32 average_tpt;	/* success ratio * expected throughput */
-	unsigned long stamp;
-};
-
-/**
- * struct iwl_scale_tbl_info -- tx params and success history for all rates
- *
- * There are two of these in struct iwl_lq_sta,
- * one for "active", and one for "search".
- */
-struct iwl_scale_tbl_info {
-	enum iwl_table_type lq_type;
-	u8 ant_type;
-	u8 is_SGI;	/* 1 = short guard interval */
-	u8 is_ht40;	/* 1 = 40 MHz channel width */
-	u8 is_dup;	/* 1 = duplicated data streams */
-	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
-	u8 max_search;	/* maximun number of tables we can search */
-	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
-	u32 current_rate;  /* rate_n_flags, uCode API format */
-	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
-};
-
-struct iwl_traffic_load {
-	unsigned long time_stamp;	/* age of the oldest statistics */
-	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
-						 * slice */
-	u32 total;			/* total num of packets during the
-					 * last TID_MAX_TIME_DIFF */
-	u8 queue_count;			/* number of queues that has
-					 * been used since the last cleanup */
-	u8 head;			/* start of the circular buffer */
-};
-
-/**
- * struct iwl_lq_sta -- driver's rate scaling private structure
- *
- * Pointer to this gets passed back and forth between driver and mac80211.
- */
-struct iwl_lq_sta {
-	u8 active_tbl;		/* index of active table, range 0-1 */
-	u8 enable_counter;	/* indicates HT mode */
-	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
-	u8 search_better_tbl;	/* 1: currently trying alternate mode */
-	s32 last_tpt;
-
-	/* The following determine when to search for a new mode */
-	u32 table_count_limit;
-	u32 max_failure_limit;	/* # failed frames before new search */
-	u32 max_success_limit;	/* # successful frames before new search */
-	u32 table_count;
-	u32 total_failed;	/* total failed frames, any/all rates */
-	u32 total_success;	/* total successful frames, any/all rates */
-	u64 flush_timer;	/* time staying in mode before new search */
-
-	u8 action_counter;	/* # mode-switch actions tried */
-	u8 is_green;
-	u8 is_dup;
-	enum ieee80211_band band;
-	u8 ibss_sta_added;
-
-	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
-	u32 supp_rates;
-	u16 active_legacy_rate;
-	u16 active_siso_rate;
-	u16 active_mimo2_rate;
-	u16 active_mimo3_rate;
-	u16 active_rate_basic;
-	s8 max_rate_idx;     /* Max rate set by user */
-	u8 missed_rate_counter;
-
-	struct iwl_link_quality_cmd lq;
-	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
-	struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
-	u8 tx_agg_tid_en;
-#ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *rs_sta_dbgfs_scale_table_file;
-	struct dentry *rs_sta_dbgfs_stats_table_file;
-	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
-	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
-	u32 dbg_fixed_rate;
-#endif
-	struct iwl_priv *drv;
-
-	/* used to be in sta_info */
-	int last_txrate_idx;
-	/* last tx rate_n_flags */
-	u32 last_rate_n_flags;
-};
-
 static void rs_rate_scale_perform(struct iwl_priv *priv,
 				   struct sk_buff *skb,
 				   struct ieee80211_sta *sta,
@@ -190,84 +92,78 @@
 {}
 #endif
 
-/*
- * Expected throughput metrics for following rates:
- * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
- * "G" is the only table that supports CCK (the first 4 rates).
+/**
+ * The following tables contain the expected throughput metrics for all rates
+ *
+ *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
+ *
+ * where invalid entries are zeros.
+ *
+ * CCK rates are only valid in legacy table and will only be used in G
+ * (2.4 GHz) band.
  */
 
-static s32 expected_tpt_A[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
+static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
+	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
 };
 
-static s32 expected_tpt_G[IWL_RATE_COUNT] = {
-	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
+static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 42, 0,  76, 102, 124, 158, 183, 193, 202}, /* Norm */
+	{0, 0, 0, 0, 46, 0,  82, 110, 132, 167, 192, 202, 210}, /* SGI */
+	{0, 0, 0, 0, 48, 0,  93, 135, 176, 251, 319, 351, 381}, /* AGG */
+	{0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
+static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
+	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
+	{0, 0, 0, 0,  96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
+	{0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
+static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
+	{0, 0, 0, 0,  81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
+	{0, 0, 0, 0,  92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
+	{0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI*/
 };
 
-static s32 expected_tpt_mimo2_20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
+static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
+	{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
+	{0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
+	{0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_mimo2_20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
+static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
+	{0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
+	{0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
+	{0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
-};
-
-static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
-};
-
-static s32 expected_tpt_mimo2_40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
-};
-
-static s32 expected_tpt_mimo2_40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
-};
-
-/* Expected throughput metric MIMO3 */
-static s32 expected_tpt_mimo3_20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 99, 99, 153, 186, 208, 239, 256, 263, 268
-};
-
-static s32 expected_tpt_mimo3_20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 106, 106, 162, 194, 215, 246, 262, 268, 273
-};
-
-static s32 expected_tpt_mimo3_40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 152, 152, 211, 239, 255, 279, 290, 294, 297
-};
-
-static s32 expected_tpt_mimo3_40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 160, 160, 219, 245, 261, 284, 294, 297, 300
+static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 152, 0, 211, 239, 255, 279,  290,  294,  297}, /* Norm */
+	{0, 0, 0, 0, 160, 0, 219, 245, 261, 284,  294,  297,  300}, /* SGI */
+	{0, 0, 0, 0, 254, 0, 443, 584, 695, 868,  984, 1030, 1070}, /* AGG */
+	{0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
 };
 
 /* mbps, mcs */
 const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
-  {"1", ""},
-  {"2", ""},
-  {"5.5", ""},
-  {"11", ""},
-  {"6", "BPSK 1/2"},
-  {"9", "BPSK 1/2"},
-  {"12", "QPSK 1/2"},
-  {"18", "QPSK 3/4"},
-  {"24", "16QAM 1/2"},
-  {"36", "16QAM 3/4"},
-  {"48", "64QAM 2/3"},
-  {"54", "64QAM 3/4"},
-  {"60", "64QAM 5/6"}
+	{  "1", "BPSK DSSS"},
+	{  "2", "QPSK DSSS"},
+	{"5.5", "BPSK CCK"},
+	{ "11", "QPSK CCK"},
+	{  "6", "BPSK 1/2"},
+	{  "9", "BPSK 1/2"},
+	{ "12", "QPSK 1/2"},
+	{ "18", "QPSK 3/4"},
+	{ "24", "16QAM 1/2"},
+	{ "36", "16QAM 3/4"},
+	{ "48", "64QAM 2/3"},
+	{ "54", "64QAM 3/4"},
+	{ "60", "64QAM 5/6"},
 };
 
 #define MCS_INDEX_PER_STREAM	(8)
@@ -405,7 +301,7 @@
 	if (rs_tl_get_load(lq_data, tid) > IWL_AGG_LOAD_THRESHOLD) {
 		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
 				sta->addr, tid);
-		ieee80211_start_tx_ba_session(priv->hw, sta->addr, tid);
+		ieee80211_start_tx_ba_session(sta, tid);
 	}
 }
 
@@ -444,7 +340,7 @@
  * packets.
  */
 static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
-			      int scale_index, s32 tpt, int retries,
+			      int scale_index, s32 tpt, int attempts,
 			      int successes)
 {
 	struct iwl_rate_scale_data *window = NULL;
@@ -454,7 +350,7 @@
 	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
 		return -EINVAL;
 
-	/* Select data for current tx bit rate */
+	/* Select window for current tx bit rate */
 	window = &(windows[scale_index]);
 
 	/*
@@ -465,7 +361,7 @@
 	 * subtract "1" from the success counter (this is the main reason
 	 * we keep these bitmaps!).
 	 */
-	while (retries > 0) {
+	while (attempts > 0) {
 		if (window->counter >= IWL_RATE_MAX_WINDOW) {
 
 			/* remove earliest */
@@ -480,17 +376,17 @@
 		/* Increment frames-attempted counter */
 		window->counter++;
 
-		/* Shift bitmap by one frame (throw away oldest history),
-		 * OR in "1", and increment "success" if this
-		 * frame was successful. */
+		/* Shift bitmap by one frame to throw away oldest history */
 		window->data <<= 1;
+
+		/* Mark the most recent #successes attempts as successful */
 		if (successes > 0) {
 			window->success_counter++;
 			window->data |= 0x1;
 			successes--;
 		}
 
-		retries--;
+		attempts--;
 	}
 
 	/* Calculate current success ratio, avoid divide-by-0! */
@@ -671,7 +567,7 @@
  * there are no non-GF stations present in the BSS.
  */
 static inline u8 rs_use_green(struct ieee80211_sta *sta,
-			      struct iwl_ht_info *ht_conf)
+			      struct iwl_ht_config *ht_conf)
 {
 	return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
 		!(ht_conf->non_GF_STA_present);
@@ -821,27 +717,45 @@
 }
 
 /*
+ * Simple function to compare two rate scale table types
+ */
+static bool table_type_matches(struct iwl_scale_tbl_info *a,
+			       struct iwl_scale_tbl_info *b)
+{
+	return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
+		(a->is_SGI == b->is_SGI);
+}
+/*
+ * Static function to get the expected throughput from an iwl_scale_tbl_info
+ * that wraps a NULL pointer check
+ */
+static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
+{
+	if (tbl->expected_tpt)
+		return tbl->expected_tpt[rs_index];
+	return 0;
+}
+
+/*
  * mac80211 sends us Tx status
  */
 static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 			 struct ieee80211_sta *sta, void *priv_sta,
 			 struct sk_buff *skb)
 {
-	int status;
-	u8 retries;
-	int rs_index, mac_index, index = 0;
+	int legacy_success;
+	int retries;
+	int rs_index, mac_index, i;
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	struct iwl_link_quality_cmd *table;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct iwl_priv *priv = (struct iwl_priv *)priv_r;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_rate_scale_data *window = NULL;
-	struct iwl_rate_scale_data *search_win = NULL;
 	enum mac80211_rate_control_flags mac_flags;
 	u32 tx_rate;
 	struct iwl_scale_tbl_info tbl_type;
-	struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
-	u8 active_index = 0;
+	struct iwl_scale_tbl_info *curr_tbl, *other_tbl;
 	s32 tpt = 0;
 
 	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
@@ -850,30 +764,14 @@
 	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
-	/* This packet was aggregated but doesn't carry rate scale info */
+	/* This packet was aggregated but doesn't carry status info */
 	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
 	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
 		return;
 
-	if (info->flags & IEEE80211_TX_STAT_AMPDU)
-		retries = 0;
-	else
-		retries = info->status.rates[0].count - 1;
-
-	if (retries > 15)
-		retries = 15;
-
 	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
 	    !lq_sta->ibss_sta_added)
-		goto out;
-
-	table = &lq_sta->lq;
-	active_index = lq_sta->active_tbl;
-
-	curr_tbl = &(lq_sta->lq_info[active_index]);
-	search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
-	window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
-	search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]);
+		return;
 
 	/*
 	 * Ignore this Tx frame response if its initial rate doesn't match
@@ -883,6 +781,7 @@
 	 * to check "search" mode, or a prior "search" mode after we've moved
 	 * to a new "search" mode (which might become the new "active" mode).
 	 */
+	table = &lq_sta->lq;
 	tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
 	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
 	if (priv->band == IEEE80211_BAND_5GHZ)
@@ -901,7 +800,7 @@
 		if (priv->band == IEEE80211_BAND_2GHZ)
 			mac_index += IWL_FIRST_OFDM_RATE;
 	}
-
+	/* Here we actually compare this rate to the latest LQ command */
 	if ((mac_index < 0) ||
 	    (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
 	    (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
@@ -911,124 +810,106 @@
 	    (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
 	    (rs_index != mac_index)) {
 		IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
-		/* the last LQ command could failed so the LQ in ucode not
-		 * the same in driver sync up
+		/*
+		 * Since rates mis-match, the last LQ command may have failed.
+		 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
+		 * ... driver.
 		 */
 		lq_sta->missed_rate_counter++;
 		if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
 			lq_sta->missed_rate_counter = 0;
 			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
 		}
-		goto out;
+		/* Regardless, ignore this status info for outdated rate */
+		return;
+	} else
+		/* Rate did match, so reset the missed_rate_counter */
+		lq_sta->missed_rate_counter = 0;
+
+	/* Figure out if rate scale algorithm is in active or search table */
+	if (table_type_matches(&tbl_type,
+				&(lq_sta->lq_info[lq_sta->active_tbl]))) {
+		curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+	} else if (table_type_matches(&tbl_type,
+				&lq_sta->lq_info[1 - lq_sta->active_tbl])) {
+		curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+		other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	} else {
+		IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
+		return;
 	}
-
-	lq_sta->missed_rate_counter = 0;
-	/* Update frame history window with "failure" for each Tx retry. */
-	while (retries) {
-		/* Look up the rate and other info used for each tx attempt.
-		 * Each tx attempt steps one entry deeper in the rate table. */
-		tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
-		rs_get_tbl_info_from_mcs(tx_rate, priv->band,
-					  &tbl_type, &rs_index);
-
-		/* If type matches "search" table,
-		 * add failure to "search" history */
-		if ((tbl_type.lq_type == search_tbl->lq_type) &&
-		    (tbl_type.ant_type == search_tbl->ant_type) &&
-		    (tbl_type.is_SGI == search_tbl->is_SGI)) {
-			if (search_tbl->expected_tpt)
-				tpt = search_tbl->expected_tpt[rs_index];
-			else
-				tpt = 0;
-			rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
-
-		/* Else if type matches "current/active" table,
-		 * add failure to "current/active" history */
-		} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
-			   (tbl_type.ant_type == curr_tbl->ant_type) &&
-			   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
-			if (curr_tbl->expected_tpt)
-				tpt = curr_tbl->expected_tpt[rs_index];
-			else
-				tpt = 0;
-			rs_collect_tx_data(window, rs_index, tpt, 1, 0);
-		}
-
-		/* If not searching for a new mode, increment failed counter
-		 * ... this helps determine when to start searching again */
-		if (lq_sta->stay_in_tbl)
-			lq_sta->total_failed++;
-		--retries;
-		index++;
-
-	}
+	window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
 
 	/*
-	 * Find (by rate) the history window to update with final Tx attempt;
-	 * if Tx was successful first try, use original rate,
-	 * else look up the rate that was, finally, successful.
+	 * Updating the frame history depends on whether packets were
+	 * aggregated.
+	 *
+	 * For aggregation, all packets were transmitted at the same rate, the
+	 * first index into rate scale table.
 	 */
-	tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
-	lq_sta->last_rate_n_flags = tx_rate;
-	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+	if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+		tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+		rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
+				&rs_index);
+		tpt = get_expected_tpt(curr_tbl, rs_index);
+		rs_collect_tx_data(window, rs_index, tpt,
+				   info->status.ampdu_ack_len,
+				   info->status.ampdu_ack_map);
 
-	/* Update frame history window with "success" if Tx got ACKed ... */
-	status = !!(info->flags & IEEE80211_TX_STAT_ACK);
-
-	/* If type matches "search" table,
-	 * add final tx status to "search" history */
-	if ((tbl_type.lq_type == search_tbl->lq_type) &&
-	    (tbl_type.ant_type == search_tbl->ant_type) &&
-	    (tbl_type.is_SGI == search_tbl->is_SGI)) {
-		if (search_tbl->expected_tpt)
-			tpt = search_tbl->expected_tpt[rs_index];
-		else
-			tpt = 0;
-		if (info->flags & IEEE80211_TX_STAT_AMPDU)
-			rs_collect_tx_data(search_win, rs_index, tpt,
-					   info->status.ampdu_ack_len,
-					   info->status.ampdu_ack_map);
-		else
-			rs_collect_tx_data(search_win, rs_index, tpt,
-					   1, status);
-	/* Else if type matches "current/active" table,
-	 * add final tx status to "current/active" history */
-	} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
-		   (tbl_type.ant_type == curr_tbl->ant_type) &&
-		   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
-		if (curr_tbl->expected_tpt)
-			tpt = curr_tbl->expected_tpt[rs_index];
-		else
-			tpt = 0;
-		if (info->flags & IEEE80211_TX_STAT_AMPDU)
-			rs_collect_tx_data(window, rs_index, tpt,
-					   info->status.ampdu_ack_len,
-					   info->status.ampdu_ack_map);
-		else
-			rs_collect_tx_data(window, rs_index, tpt,
-					   1, status);
-	}
-
-	/* If not searching for new mode, increment success/failed counter
-	 * ... these help determine when to start searching again */
-	if (lq_sta->stay_in_tbl) {
-		if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+		/* Update success/fail counts if not searching for new mode */
+		if (lq_sta->stay_in_tbl) {
 			lq_sta->total_success += info->status.ampdu_ack_map;
-			lq_sta->total_failed +=
-			     (info->status.ampdu_ack_len - info->status.ampdu_ack_map);
-		} else {
-			if (status)
-				lq_sta->total_success++;
+			lq_sta->total_failed += (info->status.ampdu_ack_len -
+					info->status.ampdu_ack_map);
+		}
+	} else {
+	/*
+	 * For legacy, update frame history with for each Tx retry.
+	 */
+		retries = info->status.rates[0].count - 1;
+		/* HW doesn't send more than 15 retries */
+		retries = min(retries, 15);
+
+		/* The last transmission may have been successful */
+		legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+		/* Collect data for each rate used during failed TX attempts */
+		for (i = 0; i <= retries; ++i) {
+			tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
+			rs_get_tbl_info_from_mcs(tx_rate, priv->band,
+					&tbl_type, &rs_index);
+			/*
+			 * Only collect stats if retried rate is in the same RS
+			 * table as active/search.
+			 */
+			if (table_type_matches(&tbl_type, curr_tbl))
+				tpt = get_expected_tpt(curr_tbl, rs_index);
+			else if (table_type_matches(&tbl_type, other_tbl))
+				tpt = get_expected_tpt(other_tbl, rs_index);
 			else
-				lq_sta->total_failed++;
+				continue;
+
+			/* Constants mean 1 transmission, 0 successes */
+			if (i < retries)
+				rs_collect_tx_data(window, rs_index, tpt, 1,
+						0);
+			else
+				rs_collect_tx_data(window, rs_index, tpt, 1,
+						legacy_success);
+		}
+
+		/* Update success/fail counts if not searching for new mode */
+		if (lq_sta->stay_in_tbl) {
+			lq_sta->total_success += legacy_success;
+			lq_sta->total_failed += retries + (1 - legacy_success);
 		}
 	}
+	/* The last TX rate is cached in lq_sta; it's set in if/else above */
+	lq_sta->last_rate_n_flags = tx_rate;
 
 	/* See if there's a better rate or modulation mode to try. */
 	if (sta && sta->supp_rates[sband->band])
 		rs_rate_scale_perform(priv, skb, sta, lq_sta);
-out:
-	return;
 }
 
 /*
@@ -1066,43 +947,45 @@
 static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
 				      struct iwl_scale_tbl_info *tbl)
 {
+	/* Used to choose among HT tables */
+	s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
+
+	/* Check for invalid LQ type */
+	if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
+		tbl->expected_tpt = expected_tpt_legacy;
+		return;
+	}
+
+	/* Legacy rates have only one table */
 	if (is_legacy(tbl->lq_type)) {
-		if (!is_a_band(tbl->lq_type))
-			tbl->expected_tpt = expected_tpt_G;
-		else
-			tbl->expected_tpt = expected_tpt_A;
-	} else if (is_siso(tbl->lq_type)) {
-		if (tbl->is_ht40 && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_siso40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_siso40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_siso20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_siso20MHz;
-	} else if (is_mimo2(tbl->lq_type)) {
-		if (tbl->is_ht40 && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo2_40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_mimo2_40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo2_20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_mimo2_20MHz;
-	} else if (is_mimo3(tbl->lq_type)) {
-		if (tbl->is_ht40 && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo3_40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_mimo3_40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo3_20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_mimo3_20MHz;
-	} else
-		tbl->expected_tpt = expected_tpt_G;
+		tbl->expected_tpt = expected_tpt_legacy;
+		return;
+	}
+
+	/* Choose among many HT tables depending on number of streams
+	 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
+	 * status */
+	if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_siso20MHz;
+	else if (is_siso(tbl->lq_type))
+		ht_tbl_pointer = expected_tpt_siso40MHz;
+	else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_mimo2_20MHz;
+	else if (is_mimo2(tbl->lq_type))
+		ht_tbl_pointer = expected_tpt_mimo2_40MHz;
+	else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_mimo3_20MHz;
+	else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
+		ht_tbl_pointer = expected_tpt_mimo3_40MHz;
+
+	if (!tbl->is_SGI && !lq_sta->is_agg)		/* Normal */
+		tbl->expected_tpt = ht_tbl_pointer[0];
+	else if (tbl->is_SGI && !lq_sta->is_agg)	/* SGI */
+		tbl->expected_tpt = ht_tbl_pointer[1];
+	else if (!tbl->is_SGI && lq_sta->is_agg)	/* AGG */
+		tbl->expected_tpt = ht_tbl_pointer[2];
+	else						/* AGG+SGI */
+		tbl->expected_tpt = ht_tbl_pointer[3];
 }
 
 /*
@@ -2077,6 +1960,14 @@
 	lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
 
 	tid = rs_tl_add_packet(lq_sta, hdr);
+	if ((tid != MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) {
+		tid_data = &priv->stations[lq_sta->lq.sta_id].tid[tid];
+		if (tid_data->agg.state == IWL_AGG_OFF)
+			lq_sta->is_agg = 0;
+		else
+			lq_sta->is_agg = 1;
+	} else
+		lq_sta->is_agg = 0;
 
 	/*
 	 * Select rate-scale / modulation-mode table to work with in
@@ -2177,10 +2068,10 @@
 
 		goto out;
 	}
-
 	/* Else we have enough samples; calculate estimate of
 	 * actual average throughput */
 
+	/* Sanity-check TPT calculations */
 	BUG_ON(window->average_tpt != ((window->success_ratio *
 			tbl->expected_tpt[index] + 64) / 128));
 
@@ -2584,22 +2475,13 @@
 			  gfp_t gfp)
 {
 	struct iwl_lq_sta *lq_sta;
+	struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
 	struct iwl_priv *priv;
-	int i, j;
 
 	priv = (struct iwl_priv *)priv_rate;
 	IWL_DEBUG_RATE(priv, "create station rate scale window\n");
 
-	lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
-
-	if (lq_sta == NULL)
-		return NULL;
-	lq_sta->lq.sta_id = 0xff;
-
-
-	for (j = 0; j < LQ_SIZE; j++)
-		for (i = 0; i < IWL_RATE_COUNT; i++)
-			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+	lq_sta = &sta_priv->lq_sta;
 
 	return lq_sta;
 }
@@ -2613,6 +2495,12 @@
 	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
 	struct iwl_lq_sta *lq_sta = priv_sta;
 
+	lq_sta->lq.sta_id = 0xff;
+
+	for (j = 0; j < LQ_SIZE; j++)
+		for (i = 0; i < IWL_RATE_COUNT; i++)
+			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
+
 	lq_sta->flush_timer = 0;
 	lq_sta->supp_rates = sta->supp_rates[sband->band];
 	for (j = 0; j < LQ_SIZE; j++)
@@ -2690,6 +2578,7 @@
 	lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
 	if (sband->band == IEEE80211_BAND_5GHZ)
 		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
+	lq_sta->is_agg = 0;
 
 	rs_initialize_lq(priv, conf, sta, lq_sta);
 }
@@ -2808,7 +2697,7 @@
 		repeat_rate--;
 	}
 
-	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_MAX;
+	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
 	lq_cmd->agg_params.agg_time_limit =
 		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
@@ -2827,11 +2716,9 @@
 static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
 			void *priv_sta)
 {
-	struct iwl_lq_sta *lq_sta = priv_sta;
 	struct iwl_priv *priv __maybe_unused = priv_r;
 
 	IWL_DEBUG_RATE(priv, "enter\n");
-	kfree(lq_sta);
 	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
@@ -2942,8 +2829,9 @@
 		   ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
 		   desc += sprintf(buff+desc, " %s",
 		   (tbl->is_ht40) ? "40MHz" : "20MHz");
-		   desc += sprintf(buff+desc, " %s %s\n", (tbl->is_SGI) ? "SGI" : "",
-		   (lq_sta->is_green) ? "GF enabled" : "");
+		   desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "",
+		   (lq_sta->is_green) ? "GF enabled" : "",
+		   (lq_sta->is_agg) ? "AGG on" : "");
 	}
 	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
 		lq_sta->last_rate_n_flags);
@@ -3076,16 +2964,16 @@
 {
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	lq_sta->rs_sta_dbgfs_scale_table_file =
-		debugfs_create_file("rate_scale_table", 0600, dir,
+		debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
 				lq_sta, &rs_sta_dbgfs_scale_table_ops);
 	lq_sta->rs_sta_dbgfs_stats_table_file =
-		debugfs_create_file("rate_stats_table", 0600, dir,
+		debugfs_create_file("rate_stats_table", S_IRUSR, dir,
 			lq_sta, &rs_sta_dbgfs_stats_table_ops);
 	lq_sta->rs_sta_dbgfs_rate_scale_data_file =
-		debugfs_create_file("rate_scale_data", 0600, dir,
+		debugfs_create_file("rate_scale_data", S_IRUSR, dir,
 			lq_sta, &rs_sta_dbgfs_rate_scale_data_ops);
 	lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file =
-		debugfs_create_u8("tx_agg_tid_enable", 0600, dir,
+		debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir,
 		&lq_sta->tx_agg_tid_en);
 
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index 9fac530..affc0c5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -54,6 +54,7 @@
 	u8 prev_table_rs;	/* prev in rate table cmd */
 };
 
+
 /*
  * These serve as indexes into
  * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
@@ -335,6 +336,106 @@
 	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
 };
 
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+	u64 data;		/* bitmap of successful frames */
+	s32 success_counter;	/* number of frames successful */
+	s32 success_ratio;	/* per-cent * 128  */
+	s32 counter;		/* number of frames attempted */
+	s32 average_tpt;	/* success ratio * expected throughput */
+	unsigned long stamp;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+	enum iwl_table_type lq_type;
+	u8 ant_type;
+	u8 is_SGI;	/* 1 = short guard interval */
+	u8 is_ht40;	/* 1 = 40 MHz channel width */
+	u8 is_dup;	/* 1 = duplicated data streams */
+	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	u8 max_search;	/* maximun number of tables we can search */
+	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	u32 current_rate;  /* rate_n_flags, uCode API format */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+};
+
+struct iwl_traffic_load {
+	unsigned long time_stamp;	/* age of the oldest statistics */
+	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
+						 * slice */
+	u32 total;			/* total num of packets during the
+					 * last TID_MAX_TIME_DIFF */
+	u8 queue_count;			/* number of queues that has
+					 * been used since the last cleanup */
+	u8 head;			/* start of the circular buffer */
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 enable_counter;	/* indicates HT mode */
+	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
+	u8 search_better_tbl;	/* 1: currently trying alternate mode */
+	s32 last_tpt;
+
+	/* The following determine when to search for a new mode */
+	u32 table_count_limit;
+	u32 max_failure_limit;	/* # failed frames before new search */
+	u32 max_success_limit;	/* # successful frames before new search */
+	u32 table_count;
+	u32 total_failed;	/* total failed frames, any/all rates */
+	u32 total_success;	/* total successful frames, any/all rates */
+	u64 flush_timer;	/* time staying in mode before new search */
+
+	u8 action_counter;	/* # mode-switch actions tried */
+	u8 is_green;
+	u8 is_dup;
+	enum ieee80211_band band;
+	u8 ibss_sta_added;
+
+	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+	u32 supp_rates;
+	u16 active_legacy_rate;
+	u16 active_siso_rate;
+	u16 active_mimo2_rate;
+	u16 active_mimo3_rate;
+	u16 active_rate_basic;
+	s8 max_rate_idx;     /* Max rate set by user */
+	u8 missed_rate_counter;
+
+	struct iwl_link_quality_cmd lq;
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
+	u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_scale_table_file;
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
+	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+	u32 dbg_fixed_rate;
+#endif
+	struct iwl_priv *drv;
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
+	/* packets destined for this STA are aggregated */
+	u8 is_agg;
+};
+
 static inline u8 num_of_ant(u8 mask)
 {
 	return  !!((mask) & ANT_A) +
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 921dc4a..b8377ef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -123,6 +123,17 @@
 		return -EINVAL;
 	}
 
+	/*
+	 * receive commit_rxon request
+	 * abort any previous channel switch if still in process
+	 */
+	if (priv->switch_rxon.switch_in_progress &&
+	    (priv->switch_rxon.channel != priv->staging_rxon.channel)) {
+		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
+		      le16_to_cpu(priv->switch_rxon.channel));
+		priv->switch_rxon.switch_in_progress = false;
+	}
+
 	/* If we don't need to send a full RXON, we can use
 	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
 	 * and other flags for the current radio configuration. */
@@ -134,6 +145,7 @@
 		}
 
 		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
+		iwl_print_rx_config_cmd(priv);
 		return 0;
 	}
 
@@ -191,11 +203,7 @@
 	priv->start_calib = 0;
 
 	/* Add the broadcast address so we can send broadcast frames */
-	if (iwl_rxon_add_station(priv, iwl_bcast_addr, 0) ==
-						IWL_INVALID_STATION) {
-		IWL_ERR(priv, "Error adding BROADCAST address for transmit.\n");
-		return -EIO;
-	}
+	iwl_add_bcast_station(priv);
 
 	/* If we have set the ASSOC_MSK and we are in BSS mode then
 	 * add the IWL_AP_ID to the station rate table */
@@ -233,6 +241,7 @@
 		}
 		memcpy(active_rxon, &priv->staging_rxon, sizeof(*active_rxon));
 	}
+	iwl_print_rx_config_cmd(priv);
 
 	iwl_init_sensitivity(priv);
 
@@ -302,7 +311,7 @@
 	list_add(&frame->list, &priv->free_frames);
 }
 
-static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv,
+static u32 iwl_fill_beacon_frame(struct iwl_priv *priv,
 					  struct ieee80211_hdr *hdr,
 					  int left)
 {
@@ -319,34 +328,74 @@
 	return priv->ibss_beacon->len;
 }
 
+/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
+static void iwl_set_beacon_tim(struct iwl_priv *priv,
+		struct iwl_tx_beacon_cmd *tx_beacon_cmd,
+		u8 *beacon, u32 frame_size)
+{
+	u16 tim_idx;
+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
+
+	/*
+	 * The index is relative to frame start but we start looking at the
+	 * variable-length part of the beacon.
+	 */
+	tim_idx = mgmt->u.beacon.variable - beacon;
+
+	/* Parse variable-length elements of beacon to find WLAN_EID_TIM */
+	while ((tim_idx < (frame_size - 2)) &&
+			(beacon[tim_idx] != WLAN_EID_TIM))
+		tim_idx += beacon[tim_idx+1] + 2;
+
+	/* If TIM field was found, set variables */
+	if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
+		tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
+		tx_beacon_cmd->tim_size = beacon[tim_idx+1];
+	} else
+		IWL_WARN(priv, "Unable to find TIM Element in beacon\n");
+}
+
 static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
-				       struct iwl_frame *frame, u8 rate)
+				       struct iwl_frame *frame)
 {
 	struct iwl_tx_beacon_cmd *tx_beacon_cmd;
-	unsigned int frame_size;
+	u32 frame_size;
+	u32 rate_flags;
+	u32 rate;
+	/*
+	 * We have to set up the TX command, the TX Beacon command, and the
+	 * beacon contents.
+	 */
 
+	/* Initialize memory */
 	tx_beacon_cmd = &frame->u.beacon;
 	memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
 
-	tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
-	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
+	/* Set up TX beacon contents */
 	frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame,
 				sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+	if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
+		return 0;
 
-	BUG_ON(frame_size > MAX_MPDU_SIZE);
+	/* Set up TX command fields */
 	tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
-	if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
-		tx_beacon_cmd->tx.rate_n_flags =
-			iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
-	else
-		tx_beacon_cmd->tx.rate_n_flags =
-			iwl_hw_set_rate_n_flags(rate, 0);
-
+	tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
+	tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 	tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
-				     TX_CMD_FLG_TSF_MSK |
-				     TX_CMD_FLG_STA_RATE_MSK;
+		TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
+
+	/* Set up TX beacon command fields */
+	iwl_set_beacon_tim(priv, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
+			frame_size);
+
+	/* Set up packet rate and flags */
+	rate = iwl_rate_get_lowest_plcp(priv);
+	priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant);
+	rate_flags = iwl_ant_idx_to_flags(priv->mgmt_tx_ant);
+	if ((rate >= IWL_FIRST_CCK_RATE) && (rate <= IWL_LAST_CCK_RATE))
+		rate_flags |= RATE_MCS_CCK_MSK;
+	tx_beacon_cmd->tx.rate_n_flags = iwl_hw_set_rate_n_flags(rate,
+			rate_flags);
 
 	return sizeof(*tx_beacon_cmd) + frame_size;
 }
@@ -355,19 +404,20 @@
 	struct iwl_frame *frame;
 	unsigned int frame_size;
 	int rc;
-	u8 rate;
 
 	frame = iwl_get_free_frame(priv);
-
 	if (!frame) {
 		IWL_ERR(priv, "Could not obtain free frame buffer for beacon "
 			  "command.\n");
 		return -ENOMEM;
 	}
 
-	rate = iwl_rate_get_lowest_plcp(priv);
-
-	frame_size = iwl_hw_get_beacon_cmd(priv, frame, rate);
+	frame_size = iwl_hw_get_beacon_cmd(priv, frame);
+	if (!frame_size) {
+		IWL_ERR(priv, "Error configuring the beacon command\n");
+		iwl_free_frame(priv, frame);
+		return -EINVAL;
+	}
 
 	rc = iwl_send_cmd_pdu(priv, REPLY_TX_BEACON, frame_size,
 			      &frame->u.cmd[0]);
@@ -525,7 +575,7 @@
 static void iwl_rx_reply_alive(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_alive_resp *palive;
 	struct delayed_work *pwork;
 
@@ -604,14 +654,14 @@
 	if (!iwl_is_ready_rf(priv))
 		return;
 
-	iwl_send_statistics_request(priv, CMD_ASYNC);
+	iwl_send_statistics_request(priv, CMD_ASYNC, false);
 }
 
 static void iwl_rx_beacon_notif(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl4965_beacon_notif *beacon =
 		(struct iwl4965_beacon_notif *)pkt->u.raw;
 	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
@@ -635,7 +685,7 @@
 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
@@ -721,7 +771,7 @@
 	 * statistics request from the host as well as for the periodic
 	 * statistics notifications (after received beacons) from the uCode.
 	 */
-	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_rx_statistics;
+	priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl_reply_statistics;
 	priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl_rx_statistics;
 
 	iwl_setup_spectrum_handlers(priv);
@@ -770,7 +820,7 @@
 		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 
 	/* calculate total frames need to be restock after handling RX */
-	total_empty = r - priv->rxq.write_actual;
+	total_empty = r - rxq->write_actual;
 	if (total_empty < 0)
 		total_empty += RX_QUEUE_SIZE;
 
@@ -787,10 +837,13 @@
 
 		rxq->queue[i] = NULL;
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				 priv->hw_params.rx_buf_size + 256,
-				 PCI_DMA_FROMDEVICE);
-		pkt = (struct iwl_rx_packet *)rxb->skb->data;
+		pci_unmap_page(priv->pci_dev, rxb->page_dma,
+			       PAGE_SIZE << priv->hw_params.rx_page_order,
+			       PCI_DMA_FROMDEVICE);
+		pkt = rxb_addr(rxb);
+
+		trace_iwlwifi_dev_rx(priv, pkt,
+			le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
 		/* Reclaim a command buffer only if this packet is a response
 		 *   to a (driver-originated) command.
@@ -812,8 +865,8 @@
 		if (priv->rx_handlers[pkt->hdr.cmd]) {
 			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 		} else {
 			/* No handling needed */
 			IWL_DEBUG_RX(priv,
@@ -822,35 +875,45 @@
 				pkt->hdr.cmd);
 		}
 
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some rx_handler might have
+		 * already taken or freed the pages.
+		 */
+
 		if (reclaim) {
-			/* Invoke any callbacks, transfer the skb to caller, and
-			 * fire off the (possibly) blocking iwl_send_cmd()
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking iwl_send_cmd()
 			 * as we reclaim the driver command queue */
-			if (rxb && rxb->skb)
+			if (rxb->page)
 				iwl_tx_cmd_complete(priv, rxb);
 			else
 				IWL_WARN(priv, "Claim null rxb?\n");
 		}
 
-		/* For now we just don't re-use anything.  We can tweak this
-		 * later to try and re-use notification packets and SKBs that
-		 * fail to Rx correctly */
-		if (rxb->skb != NULL) {
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb_any(rxb->skb);
-			rxb->skb = NULL;
-		}
-
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
 		spin_lock_irqsave(&rxq->lock, flags);
-		list_add_tail(&rxb->list, &priv->rxq.rx_used);
+		if (rxb->page != NULL) {
+			rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
+				0, PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
 		spin_unlock_irqrestore(&rxq->lock, flags);
+
 		i = (i + 1) & RX_QUEUE_MASK;
 		/* If there are a lot of unused frames,
 		 * restock the Rx queue so ucode wont assert. */
 		if (fill_rx) {
 			count++;
 			if (count >= 8) {
-				priv->rxq.read = i;
+				rxq->read = i;
 				iwl_rx_replenish_now(priv);
 				count = 0;
 			}
@@ -858,7 +921,7 @@
 	}
 
 	/* Backtrack one entry */
-	priv->rxq.read = i;
+	rxq->read = i;
 	if (fill_rx)
 		iwl_rx_replenish_now(priv);
 	else
@@ -878,6 +941,7 @@
 	u32 inta, handled = 0;
 	u32 inta_fh;
 	unsigned long flags;
+	u32 i;
 #ifdef CONFIG_IWLWIFI_DEBUG
 	u32 inta_mask;
 #endif
@@ -905,6 +969,8 @@
 	}
 #endif
 
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
 	 * atomic, make sure that inta covers all the interrupts that
 	 * we've discovered, even if FH interrupt came in just after
@@ -926,8 +992,6 @@
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
-		spin_unlock_irqrestore(&priv->lock, flags);
-
 		return;
 	}
 
@@ -995,19 +1059,17 @@
 		handled |= CSR_INT_BIT_SW_ERR;
 	}
 
-	/* uCode wakes up after power-down sleep */
+	/*
+	 * uCode wakes up after power-down sleep.
+	 * Tell device about any new tx or host commands enqueued,
+	 * and about any Rx buffers made available while asleep.
+	 */
 	if (inta & CSR_INT_BIT_WAKEUP) {
 		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
 		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
-
+		for (i = 0; i < priv->hw_params.max_txq_num; i++)
+			iwl_txq_update_write_ptr(priv, &priv->txq[i]);
 		priv->isr_stats.wakeup++;
-
 		handled |= CSR_INT_BIT_WAKEUP;
 	}
 
@@ -1020,11 +1082,12 @@
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
+	/* This "Tx" DMA channel is used only for loading uCode */
 	if (inta & CSR_INT_BIT_FH_TX) {
-		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
 		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
-		/* FH finished to write, send event */
+		/* Wake up uCode load routine, now that load is complete */
 		priv->ucode_write_complete = 1;
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
@@ -1054,7 +1117,6 @@
 			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
 	}
 #endif
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 /* tasklet for iwlagn interrupt */
@@ -1063,6 +1125,7 @@
 	u32 inta = 0;
 	u32 handled = 0;
 	unsigned long flags;
+	u32 i;
 #ifdef CONFIG_IWLWIFI_DEBUG
 	u32 inta_mask;
 #endif
@@ -1084,6 +1147,9 @@
 				inta, inta_mask);
 	}
 #endif
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* saved interrupt in inta variable now we can reset priv->inta */
 	priv->inta = 0;
 
@@ -1099,8 +1165,6 @@
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
-		spin_unlock_irqrestore(&priv->lock, flags);
-
 		return;
 	}
 
@@ -1172,12 +1236,8 @@
 	if (inta & CSR_INT_BIT_WAKEUP) {
 		IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
 		iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
-		iwl_txq_update_write_ptr(priv, &priv->txq[0]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[1]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[2]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[3]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[4]);
-		iwl_txq_update_write_ptr(priv, &priv->txq[5]);
+		for (i = 0; i < priv->hw_params.max_txq_num; i++)
+			iwl_txq_update_write_ptr(priv, &priv->txq[i]);
 
 		priv->isr_stats.wakeup++;
 
@@ -1206,26 +1266,36 @@
 		 * 3- update RX shared data to indicate last write index.
 		 * 4- send interrupt.
 		 * This could lead to RX race, driver could receive RX interrupt
-		 * but the shared data changes does not reflect this.
-		 * this could lead to RX race, RX periodic will solve this race
+		 * but the shared data changes does not reflect this;
+		 * periodic interrupt will detect any dangling Rx activity.
 		 */
-		iwl_write32(priv, CSR_INT_PERIODIC_REG,
+
+		/* Disable periodic interrupt; we use it as just a one-shot. */
+		iwl_write8(priv, CSR_INT_PERIODIC_REG,
 			    CSR_INT_PERIODIC_DIS);
 		iwl_rx_handle(priv);
-		/* Only set RX periodic if real RX is received. */
+
+		/*
+		 * Enable periodic interrupt in 8 msec only if we received
+		 * real RX interrupt (instead of just periodic int), to catch
+		 * any dangling Rx interrupt.  If it was just the periodic
+		 * interrupt, there was no dangling Rx activity, and no need
+		 * to extend the periodic interrupt; one-shot is enough.
+		 */
 		if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
-			iwl_write32(priv, CSR_INT_PERIODIC_REG,
+			iwl_write8(priv, CSR_INT_PERIODIC_REG,
 				    CSR_INT_PERIODIC_ENA);
 
 		priv->isr_stats.rx++;
 	}
 
+	/* This "Tx" DMA channel is used only for loading uCode */
 	if (inta & CSR_INT_BIT_FH_TX) {
 		iwl_write32(priv, CSR_FH_INT_STATUS, CSR49_FH_INT_TX_MASK);
-		IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+		IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
 		priv->isr_stats.tx++;
 		handled |= CSR_INT_BIT_FH_TX;
-		/* FH finished to write, send event */
+		/* Wake up uCode load routine, now that load is complete */
 		priv->ucode_write_complete = 1;
 		wake_up_interruptible(&priv->wait_command_queue);
 	}
@@ -1240,14 +1310,10 @@
 			 inta & ~priv->inta_mask);
 	}
 
-
 	/* Re-enable all interrupts */
 	/* only Re-enable if diabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 }
 
 
@@ -1367,6 +1433,14 @@
 	       IWL_UCODE_API(priv->ucode_ver),
 	       IWL_UCODE_SERIAL(priv->ucode_ver));
 
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%u.%u.%u.%u",
+		 IWL_UCODE_MAJOR(priv->ucode_ver),
+		 IWL_UCODE_MINOR(priv->ucode_ver),
+		 IWL_UCODE_API(priv->ucode_ver),
+		 IWL_UCODE_SERIAL(priv->ucode_ver));
+
 	if (build)
 		IWL_DEBUG_INFO(priv, "Build %u\n", build);
 
@@ -1531,7 +1605,6 @@
 	return ret;
 }
 
-#ifdef CONFIG_IWLWIFI_DEBUG
 static const char *desc_lookup_text[] = {
 	"OK",
 	"FAIL",
@@ -1589,7 +1662,9 @@
 		base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
 
 	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+		IWL_ERR(priv,
+			"Not valid error log pointer 0x%08X for %s uCode\n",
+			base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
 		return;
 	}
 
@@ -1611,6 +1686,9 @@
 	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
 	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
 
+	trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
+				      blink1, blink2, ilink1, ilink2);
+
 	IWL_ERR(priv, "Desc                               Time       "
 		"data1      data2      line\n");
 	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
@@ -1635,6 +1713,7 @@
 	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
 	u32 ptr;        /* SRAM byte address of log data */
 	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
 
 	if (num_events == 0)
 		return;
@@ -1650,26 +1729,72 @@
 
 	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
 
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+
+	/* Set starting address; reads will auto-increment */
+	_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
+	rmb();
+
 	/* "time" is actually "data" for mode 0 (no timestamp).
 	* place event id # at far right for easier visual parsing. */
 	for (i = 0; i < num_events; i++) {
-		ev = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
-		time = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
+		ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 		if (mode == 0) {
 			/* data, ev */
+			trace_iwlwifi_dev_ucode_event(priv, 0, time, ev);
 			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
 		} else {
-			data = iwl_read_targ_mem(priv, ptr);
-			ptr += sizeof(u32);
+			data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
 					time, data, ev);
+			trace_iwlwifi_dev_ucode_event(priv, time, data, ev);
 		}
 	}
+
+	/* Allow device to power down */
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+}
+
+/**
+ * iwl_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static void iwl_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+				      u32 num_wraps, u32 next_entry,
+				      u32 size, u32 mode)
+{
+	/*
+	 * display the newest DEFAULT_LOG_ENTRIES entries
+	 * i.e the entries just before the next ont that uCode would fill.
+	 */
+	if (num_wraps) {
+		if (next_entry < size) {
+			iwl_print_event_log(priv,
+					capacity - (size - next_entry),
+					size - next_entry, mode);
+			iwl_print_event_log(priv, 0,
+				    next_entry, mode);
+		} else
+			iwl_print_event_log(priv, next_entry - size,
+				    size, mode);
+	} else {
+		if (next_entry < size)
+			iwl_print_event_log(priv, 0, next_entry, mode);
+		else
+			iwl_print_event_log(priv, next_entry - size,
+					    size, mode);
+	}
 }
 
-void iwl_dump_nic_event_log(struct iwl_priv *priv)
+/* For sanity check only.  Actual size is determined by uCode, typ. 512 */
+#define MAX_EVENT_LOG_SIZE (512)
+
+#define DEFAULT_DUMP_EVENT_LOG_ENTRIES (20)
+
+void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 {
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
@@ -1684,7 +1809,9 @@
 		base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 
 	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
-		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+		IWL_ERR(priv,
+			"Invalid event log pointer 0x%08X for %s uCode\n",
+			base, (priv->ucode_type == UCODE_INIT) ? "Init" : "RT");
 		return;
 	}
 
@@ -1694,6 +1821,18 @@
 	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
 	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
 
+	if (capacity > MAX_EVENT_LOG_SIZE) {
+		IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
+			capacity, MAX_EVENT_LOG_SIZE);
+		capacity = MAX_EVENT_LOG_SIZE;
+	}
+
+	if (next_entry > MAX_EVENT_LOG_SIZE) {
+		IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
+			next_entry, MAX_EVENT_LOG_SIZE);
+		next_entry = MAX_EVENT_LOG_SIZE;
+	}
+
 	size = num_wraps ? capacity : next_entry;
 
 	/* bail out if nothing in log */
@@ -1702,19 +1841,37 @@
 		return;
 	}
 
-	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
-			size, num_wraps);
-
-	/* if uCode has wrapped back to top of log, start at the oldest entry,
-	 * i.e the next one that uCode would fill. */
-	if (num_wraps)
-		iwl_print_event_log(priv, next_entry,
-					capacity - next_entry, mode);
-	/* (then/else) start at top of log */
-	iwl_print_event_log(priv, 0, next_entry, mode);
-
-}
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS))
+		size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+			? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+	size = (size > DEFAULT_DUMP_EVENT_LOG_ENTRIES)
+		? DEFAULT_DUMP_EVENT_LOG_ENTRIES : size;
 #endif
+	IWL_ERR(priv, "Start IWL Event Log Dump: display last %u entries\n",
+		size);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
+		/*
+		 * if uCode has wrapped back to top of log,
+		 * start at the oldest entry,
+		 * i.e the next one that uCode would fill.
+		 */
+		if (num_wraps)
+			iwl_print_event_log(priv, next_entry,
+					    capacity - next_entry, mode);
+		/* (then/else) start at top of log */
+		iwl_print_event_log(priv, 0, next_entry, mode);
+	} else
+		iwl_print_last_event_logs(priv, capacity, num_wraps,
+					next_entry, size, mode);
+#else
+	iwl_print_last_event_logs(priv, capacity, num_wraps,
+				next_entry, size, mode);
+#endif
+}
 
 /**
  * iwl_alive_start - called after REPLY_ALIVE notification received
@@ -1763,6 +1920,10 @@
 	priv->active_rate = priv->rates_mask;
 	priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
 
+	/* Configure Tx antenna selection based on H/W config */
+	if (priv->cfg->ops->hcmd->set_tx_ant)
+		priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
+
 	if (iwl_is_associated(priv)) {
 		struct iwl_rxon_cmd *active_rxon =
 				(struct iwl_rxon_cmd *)&priv->active_rxon;
@@ -1790,7 +1951,7 @@
 	/* At this point, the NIC is initialized and operational */
 	iwl_rf_kill_ct_config(priv);
 
-	iwl_leds_register(priv);
+	iwl_leds_init(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
 	set_bit(STATUS_READY, &priv->status);
@@ -1828,8 +1989,6 @@
 	if (!exit_pending)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
 
-	iwl_leds_unregister(priv);
-
 	iwl_clear_stations_table(priv);
 
 	/* Unblock any waiting calls */
@@ -1877,24 +2036,20 @@
 
 	/* device going down, Stop using ICT table */
 	iwl_disable_ict(priv);
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_clear_bit(priv, CSR_GP_CNTRL,
-			 CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-	spin_unlock_irqrestore(&priv->lock, flags);
 
 	iwl_txq_ctx_stop(priv);
 	iwl_rxq_stop(priv);
 
-	iwl_write_prph(priv, APMG_CLK_DIS_REG,
-				APMG_CLK_VAL_DMA_CLK_RQT);
-
+	/* Power-down device's busmaster DMA clocks */
+	iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 	udelay(5);
 
-	/* FIXME: apm_ops.suspend(priv) */
-	if (exit_pending)
-		priv->cfg->ops->lib->apm_ops.stop(priv);
-	else
-		priv->cfg->ops->lib->apm_ops.reset(priv);
+	/* Make sure (redundant) we've released our request to stay awake */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+
+	/* Stop the device, and put it in low power state */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
  exit:
 	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
 
@@ -2281,6 +2436,67 @@
 
 #define UCODE_READY_TIMEOUT	(4 * HZ)
 
+/*
+ * Not a mac80211 entry point function, but it fits in with all the
+ * other mac80211 functions grouped here.
+ */
+static int iwl_setup_mac(struct iwl_priv *priv)
+{
+	int ret;
+	struct ieee80211_hw *hw = priv->hw;
+	hw->rate_control_algorithm = "iwl-agn-rs";
+
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM |
+		    IEEE80211_HW_AMPDU_AGGREGATION |
+		    IEEE80211_HW_SPECTRUM_MGMT;
+
+	if (!priv->cfg->broken_powersave)
+		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+
+	hw->sta_data_size = sizeof(struct iwl_station_priv);
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
+
+	hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+			    WIPHY_FLAG_DISABLE_BEACON_HINTS;
+
+	/*
+	 * For now, disable PS by default because it affects
+	 * RX performance significantly.
+	 */
+	hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
+
+	/* Default value; 4 EDCA QOS priorities */
+	hw->queues = 4;
+
+	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
+
+	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&priv->bands[IEEE80211_BAND_2GHZ];
+	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&priv->bands[IEEE80211_BAND_5GHZ];
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		return ret;
+	}
+	priv->mac80211_registered = 1;
+
+	return 0;
+}
+
+
 static int iwl_mac_start(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
@@ -2328,6 +2544,8 @@
 		}
 	}
 
+	iwl_led_start(priv);
+
 out:
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211(priv, "leave\n");
@@ -2404,6 +2622,10 @@
 			IWL_WARN(priv, "REPLY_RXON_TIMING failed - "
 					"Attempting to continue.\n");
 
+		/* AP has all antennas */
+		priv->chain_noise_data.active_chains =
+			priv->hw_params.valid_rx_ant;
+		iwl_set_rxon_ht(priv, &priv->current_ht_config);
 		if (priv->cfg->ops->hcmd->set_rxon_chain)
 			priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
@@ -2432,10 +2654,11 @@
 		/* restore RXON assoc */
 		priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK;
 		iwlcore_commit_rxon(priv);
+		iwl_reset_qos(priv);
 		spin_lock_irqsave(&priv->lock, flags);
 		iwl_activate_qos(priv, 1);
 		spin_unlock_irqrestore(&priv->lock, flags);
-		iwl_rxon_add_station(priv, iwl_bcast_addr, 0);
+		iwl_add_bcast_station(priv);
 	}
 	iwl_send_beacon_cmd(priv);
 
@@ -2527,6 +2750,7 @@
 }
 
 static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
 			     enum ieee80211_ampdu_mlme_action action,
 			     struct ieee80211_sta *sta, u16 tid, u16 *ssn)
 {
@@ -2580,6 +2804,45 @@
 	return 0;
 }
 
+static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       enum sta_notify_cmd cmd,
+			       struct ieee80211_sta *sta)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	int sta_id;
+
+	/*
+	 * TODO: We really should use this callback to
+	 *	 actually maintain the station table in
+	 *	 the device.
+	 */
+
+	switch (cmd) {
+	case STA_NOTIFY_ADD:
+		atomic_set(&sta_priv->pending_frames, 0);
+		if (vif->type == NL80211_IFTYPE_AP)
+			sta_priv->client = true;
+		break;
+	case STA_NOTIFY_SLEEP:
+		WARN_ON(!sta_priv->client);
+		sta_priv->asleep = true;
+		if (atomic_read(&sta_priv->pending_frames) > 0)
+			ieee80211_sta_block_awake(hw, sta, true);
+		break;
+	case STA_NOTIFY_AWAKE:
+		WARN_ON(!sta_priv->client);
+		sta_priv->asleep = false;
+		sta_id = iwl_find_station(priv, sta->addr);
+		if (sta_id != IWL_INVALID_STATION)
+			iwl_sta_modify_ps_wake(priv, sta_id);
+		break;
+	default:
+		break;
+	}
+}
+
 /*****************************************************************************
  *
  * sysfs attributes
@@ -2774,7 +3037,7 @@
 		return -EAGAIN;
 
 	mutex_lock(&priv->mutex);
-	rc = iwl_send_statistics_request(priv, 0);
+	rc = iwl_send_statistics_request(priv, CMD_SYNC, false);
 	mutex_unlock(&priv->mutex);
 
 	if (rc) {
@@ -2799,6 +3062,40 @@
 
 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
 
+static ssize_t show_rts_ht_protection(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	return sprintf(buf, "%s\n",
+		priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
+}
+
+static ssize_t store_rts_ht_protection(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		IWL_INFO(priv, "Input is not in decimal form.\n");
+	else {
+		if (!iwl_is_associated(priv))
+			priv->cfg->use_rts_for_ht = val ? true : false;
+		else
+			IWL_ERR(priv, "Sta associated with AP - "
+				"Change protection mechanism is not allowed\n");
+		ret = count;
+	}
+	return ret;
+}
+
+static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
+			show_rts_ht_protection, store_rts_ht_protection);
+
 
 /*****************************************************************************
  *
@@ -2849,12 +3146,103 @@
 	del_timer_sync(&priv->statistics_periodic);
 }
 
+static void iwl_init_hw_rates(struct iwl_priv *priv,
+			      struct ieee80211_rate *rates)
+{
+	int i;
+
+	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
+		rates[i].bitrate = iwl_rates[i].ieee * 5;
+		rates[i].hw_value = i; /* Rate scaling will work on indexes */
+		rates[i].hw_value_short = i;
+		rates[i].flags = 0;
+		if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
+			/*
+			 * If CCK != 1M then set short preamble rate flag.
+			 */
+			rates[i].flags |=
+				(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
+					0 : IEEE80211_RATE_SHORT_PREAMBLE;
+		}
+	}
+}
+
+static int iwl_init_drv(struct iwl_priv *priv)
+{
+	int ret;
+
+	priv->ibss_beacon = NULL;
+
+	spin_lock_init(&priv->lock);
+	spin_lock_init(&priv->sta_lock);
+	spin_lock_init(&priv->hcmd_lock);
+
+	INIT_LIST_HEAD(&priv->free_frames);
+
+	mutex_init(&priv->mutex);
+
+	/* Clear the driver's (not device's) station table */
+	iwl_clear_stations_table(priv);
+
+	priv->ieee_channels = NULL;
+	priv->ieee_rates = NULL;
+	priv->band = IEEE80211_BAND_2GHZ;
+
+	priv->iw_mode = NL80211_IFTYPE_STATION;
+
+	/* Choose which receivers/antennas to use */
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	iwl_init_scan_params(priv);
+
+	iwl_reset_qos(priv);
+
+	priv->qos_data.qos_active = 0;
+	priv->qos_data.qos_cap.val = 0;
+
+	priv->rates_mask = IWL_RATES_MASK;
+	/* Set the tx_power_user_lmt to the lowest power level
+	 * this value will get overwritten by channel max power avg
+	 * from eeprom */
+	priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
+
+	ret = iwl_init_channel_map(priv);
+	if (ret) {
+		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
+		goto err;
+	}
+
+	ret = iwlcore_init_geos(priv);
+	if (ret) {
+		IWL_ERR(priv, "initializing geos failed: %d\n", ret);
+		goto err_free_channel_map;
+	}
+	iwl_init_hw_rates(priv, priv->ieee_rates);
+
+	return 0;
+
+err_free_channel_map:
+	iwl_free_channel_map(priv);
+err:
+	return ret;
+}
+
+static void iwl_uninit_drv(struct iwl_priv *priv)
+{
+	iwl_calib_free_results(priv);
+	iwlcore_free_geos(priv);
+	iwl_free_channel_map(priv);
+	kfree(priv->scan);
+}
+
 static struct attribute *iwl_sysfs_entries[] = {
 	&dev_attr_flags.attr,
 	&dev_attr_filter_flags.attr,
 	&dev_attr_statistics.attr,
 	&dev_attr_temperature.attr,
 	&dev_attr_tx_power.attr,
+	&dev_attr_rts_ht_protection.attr,
 #ifdef CONFIG_IWLWIFI_DEBUG
 	&dev_attr_debug_level.attr,
 #endif
@@ -2882,7 +3270,8 @@
 	.reset_tsf = iwl_mac_reset_tsf,
 	.bss_info_changed = iwl_bss_info_changed,
 	.ampdu_action = iwl_mac_ampdu_action,
-	.hw_scan = iwl_mac_hw_scan
+	.hw_scan = iwl_mac_hw_scan,
+	.sta_notify = iwl_mac_sta_notify,
 };
 
 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -2990,12 +3379,6 @@
 		goto out_iounmap;
 	}
 
-	/* amp init */
-	err = priv->cfg->ops->lib->apm_ops.init(priv);
-	if (err < 0) {
-		IWL_ERR(priv, "Failed to init APMG\n");
-		goto out_iounmap;
-	}
 	/*****************
 	 * 4. Read EEPROM
 	 *****************/
@@ -3141,6 +3524,15 @@
 		iwl_down(priv);
 	}
 
+	/*
+	 * Make sure device is reset to low power before unloading driver.
+	 * This may be redundant with iwl_down(), but there are paths to
+	 * run iwl_down() without calling apm_ops.stop(), and there are
+	 * paths to avoid running iwl_down() at all before leaving driver.
+	 * This (inexpensive) call *makes sure* device is reset.
+	 */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
 	iwl_tt_exit(priv);
 
 	/* make sure we flush any pending irq or
@@ -3203,37 +3595,97 @@
 	{IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)},
 #endif /* CONFIG_IWL4965 */
 #ifdef CONFIG_IWL5000
-	{IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)},
-	{IWL_PCI_DEVICE(0x4232, PCI_ANY_ID, iwl5100_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4235, PCI_ANY_ID, iwl5300_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4236, PCI_ANY_ID, iwl5300_agn_cfg)},
-	{IWL_PCI_DEVICE(0x4237, PCI_ANY_ID, iwl5100_agn_cfg)},
-/* 5350 WiFi/WiMax */
-	{IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)},
-	{IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)},
-	{IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)},
-/* 5150 Wifi/WiMax */
-	{IWL_PCI_DEVICE(0x423C, PCI_ANY_ID, iwl5150_agn_cfg)},
-	{IWL_PCI_DEVICE(0x423D, PCI_ANY_ID, iwl5150_agn_cfg)},
-/* 6000/6050 Series */
-	{IWL_PCI_DEVICE(0x008D, PCI_ANY_ID, iwl6000h_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x008E, PCI_ANY_ID, iwl6000h_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000i_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000i_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x0087, PCI_ANY_ID, iwl6050_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0088, PCI_ANY_ID, iwl6050_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x0089, PCI_ANY_ID, iwl6050_2agn_cfg)},
+/* 5100 Series WiFi */
+	{IWL_PCI_DEVICE(0x4232, 0x1201, iwl5100_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1301, iwl5100_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1204, iwl5100_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1304, iwl5100_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bgn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bgn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1206, iwl5100_abg_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1306, iwl5100_abg_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1221, iwl5100_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1321, iwl5100_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1224, iwl5100_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1324, iwl5100_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1225, iwl5100_bgn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1325, iwl5100_bgn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1226, iwl5100_abg_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4232, 0x1326, iwl5100_abg_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1211, iwl5100_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1311, iwl5100_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1214, iwl5100_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1314, iwl5100_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1215, iwl5100_bgn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1315, iwl5100_bgn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1216, iwl5100_abg_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4237, 0x1316, iwl5100_abg_cfg)}, /* Half Mini Card */
+
+/* 5300 Series WiFi */
+	{IWL_PCI_DEVICE(0x4235, 0x1021, iwl5300_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1121, iwl5300_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1024, iwl5300_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1124, iwl5300_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1001, iwl5300_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1101, iwl5300_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1004, iwl5300_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4235, 0x1104, iwl5300_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4236, 0x1011, iwl5300_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4236, 0x1111, iwl5300_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x4236, 0x1014, iwl5300_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x4236, 0x1114, iwl5300_agn_cfg)}, /* Half Mini Card */
+
+/* 5350 Series WiFi/WiMax */
+	{IWL_PCI_DEVICE(0x423A, 0x1001, iwl5350_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423A, 0x1021, iwl5350_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423B, 0x1011, iwl5350_agn_cfg)}, /* Mini Card */
+
+/* 5150 Series Wifi/WiMax */
+	{IWL_PCI_DEVICE(0x423C, 0x1201, iwl5150_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423C, 0x1301, iwl5150_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x423C, 0x1206, iwl5150_abg_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
+
+	{IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */
+	{IWL_PCI_DEVICE(0x423D, 0x1216, iwl5150_abg_cfg)}, /* Mini Card */
+	{IWL_PCI_DEVICE(0x423D, 0x1316, iwl5150_abg_cfg)}, /* Half Mini Card */
+
+/* 6x00 Series */
+	{IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
+
+/* 6x50 WiFi/WiMax Series */
+	{IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
+
 /* 1000 Series WiFi */
-	{IWL_PCI_DEVICE(0x0083, PCI_ANY_ID, iwl1000_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0084, PCI_ANY_ID, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
 #endif /* CONFIG_IWL5000 */
 
 	{0}
@@ -3288,9 +3740,9 @@
 module_init(iwl_init);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug50, iwl_debug_level, uint, 0444);
+module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
-module_param_named(debug, iwl_debug_level, uint, 0644);
+module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
 #endif
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index c4b565a..95a57b3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -132,6 +132,7 @@
 		priv->calib_results[i].buf_len = 0;
 	}
 }
+EXPORT_SYMBOL(iwl_calib_free_results);
 
 /*****************************************************************************
  * RUNTIME calibrations framework
@@ -447,11 +448,11 @@
 				cpu_to_le16((u16)data->nrg_th_ofdm);
 
 	cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
-				cpu_to_le16(190);
+				cpu_to_le16(data->barker_corr_th_min);
 	cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
-				cpu_to_le16(390);
+				cpu_to_le16(data->barker_corr_th_min_mrc);
 	cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
-				cpu_to_le16(62);
+				cpu_to_le16(data->nrg_th_cca);
 
 	IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
 			data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
@@ -516,7 +517,7 @@
 	for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
 		data->nrg_silence_rssi[i] = 0;
 
-	data->auto_corr_ofdm = 90;
+	data->auto_corr_ofdm =  ranges->auto_corr_min_ofdm;
 	data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
 	data->auto_corr_ofdm_x1  = ranges->auto_corr_min_ofdm_x1;
 	data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
@@ -524,6 +525,9 @@
 	data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
 	data->nrg_th_cck = ranges->nrg_th_cck;
 	data->nrg_th_ofdm = ranges->nrg_th_ofdm;
+	data->barker_corr_th_min = ranges->barker_corr_th_min;
+	data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc;
+	data->nrg_th_cca = ranges->nrg_th_cca;
 
 	data->last_bad_plcp_cnt_ofdm = 0;
 	data->last_fa_cnt_ofdm = 0;
@@ -643,6 +647,15 @@
 }
 EXPORT_SYMBOL(iwl_sensitivity_calibration);
 
+static inline u8 find_first_chain(u8 mask)
+{
+	if (mask & ANT_A)
+		return CHAIN_A;
+	if (mask & ANT_B)
+		return CHAIN_B;
+	return CHAIN_C;
+}
+
 /*
  * Accumulate 20 beacons of signal and noise statistics for each of
  *   3 receivers/antennas/rx-chains, then figure out:
@@ -675,14 +688,17 @@
 	u8 num_tx_chains;
 	unsigned long flags;
 	struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
+	u8 first_chain;
 
 	if (priv->disable_chain_noise_cal)
 		return;
 
 	data = &(priv->chain_noise_data);
 
-	/* Accumulate just the first 20 beacons after the first association,
-	 *   then we're done forever. */
+	/*
+	 * Accumulate just the first "chain_noise_num_beacons" after
+	 * the first association, then we're done forever.
+	 */
 	if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
 		if (data->state == IWL_CHAIN_NOISE_ALIVE)
 			IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
@@ -710,7 +726,10 @@
 		return;
 	}
 
-	/* Accumulate beacon statistics values across 20 beacons */
+	/*
+	 *  Accumulate beacon statistics values across
+	 * "chain_noise_num_beacons"
+	 */
 	chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
 				IN_BAND_FILTER;
 	chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
@@ -741,16 +760,19 @@
 	IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
 			chain_noise_a, chain_noise_b, chain_noise_c);
 
-	/* If this is the 20th beacon, determine:
+	/* If this is the "chain_noise_num_beacons", determine:
 	 * 1)  Disconnected antennas (using signal strengths)
 	 * 2)  Differential gain (using silence noise) to balance receivers */
-	if (data->beacon_count != CAL_NUM_OF_BEACONS)
+	if (data->beacon_count != priv->cfg->chain_noise_num_beacons)
 		return;
 
 	/* Analyze signal for disconnected antenna */
-	average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
-	average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
-	average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
+	average_sig[0] =
+		(data->chain_signal_a) / priv->cfg->chain_noise_num_beacons;
+	average_sig[1] =
+		(data->chain_signal_b) / priv->cfg->chain_noise_num_beacons;
+	average_sig[2] =
+		(data->chain_signal_c) / priv->cfg->chain_noise_num_beacons;
 
 	if (average_sig[0] >= average_sig[1]) {
 		max_average_sig = average_sig[0];
@@ -803,13 +825,17 @@
 			/* there is a Tx antenna connected */
 			break;
 		if (num_tx_chains == priv->hw_params.tx_chains_num &&
-		data->disconn_array[i]) {
-			/* This is the last TX antenna and is also
-			 * disconnected connect it anyway */
-			data->disconn_array[i] = 0;
-			active_chains |= ant_msk;
-			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - "
-				"declare %d as connected\n", i);
+		    data->disconn_array[i]) {
+			/*
+			 * If all chains are disconnected
+			 * connect the first valid tx chain
+			 */
+			first_chain =
+				find_first_chain(priv->cfg->valid_tx_ant);
+			data->disconn_array[first_chain] = 0;
+			active_chains |= BIT(first_chain);
+			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - declare %d as connected\n",
+					first_chain);
 			break;
 		}
 	}
@@ -820,9 +846,12 @@
 			active_chains);
 
 	/* Analyze noise for rx balance */
-	average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
-	average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
-	average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
+	average_noise[0] =
+		((data->chain_noise_a) / priv->cfg->chain_noise_num_beacons);
+	average_noise[1] =
+		((data->chain_noise_b) / priv->cfg->chain_noise_num_beacons);
+	average_noise[2] =
+		((data->chain_noise_c) / priv->cfg->chain_noise_num_beacons);
 
 	for (i = 0; i < NUM_RX_CHAINS; i++) {
 		if (!(data->disconn_array[i]) &&
@@ -843,7 +872,8 @@
 
 	if (priv->cfg->ops->utils->gain_computation)
 		priv->cfg->ops->utils->gain_computation(priv, average_noise,
-			min_average_noise_antenna_i, min_average_noise);
+				min_average_noise_antenna_i, min_average_noise,
+				find_first_chain(priv->cfg->valid_rx_ant));
 
 	/* Some power changes may have been made during the calibration.
 	 * Update and commit the RXON
@@ -870,7 +900,7 @@
 
 	/* Ask for statistics now, the uCode will send notification
 	 * periodically after association */
-	iwl_send_statistics_request(priv, CMD_ASYNC);
+	iwl_send_statistics_request(priv, CMD_ASYNC, true);
 }
 EXPORT_SYMBOL(iwl_reset_run_time_calib);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 4afaf77..e915075 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -109,11 +109,12 @@
 	REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */
 
 	/* WiMAX coexistence */
-	COEX_PRIORITY_TABLE_CMD = 0x5a,	/*5000 only */
+	COEX_PRIORITY_TABLE_CMD = 0x5a,	/* for 5000 series and up */
 	COEX_MEDIUM_NOTIFICATION = 0x5b,
 	COEX_EVENT_CMD = 0x5c,
 
 	/* Calibration */
+	TEMPERATURE_NOTIFICATION = 0x62,
 	CALIBRATION_CFG_CMD = 0x65,
 	CALIBRATION_RES_NOTIFICATION = 0x66,
 	CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
@@ -148,7 +149,7 @@
 	QUIET_NOTIFICATION = 0x96,		/* not used */
 	REPLY_TX_PWR_TABLE_CMD = 0x97,
 	REPLY_TX_POWER_DBM_CMD_V1 = 0x98,	/* old version of API */
-	TX_ANT_CONFIGURATION_CMD = 0x98,	/* not used */
+	TX_ANT_CONFIGURATION_CMD = 0x98,
 	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */
 
 	/* Bluetooth device coexistence config command */
@@ -353,6 +354,9 @@
 #define POWER_TABLE_NUM_HT_OFDM_ENTRIES		32
 #define POWER_TABLE_CCK_ENTRY			32
 
+#define IWL_PWR_NUM_HT_OFDM_ENTRIES		24
+#define IWL_PWR_CCK_ENTRIES			2
+
 /**
  * union iwl4965_tx_power_dual_stream
  *
@@ -411,6 +415,16 @@
 	u8 reserved;
 } __attribute__ ((packed));
 
+/**
+ * Command TX_ANT_CONFIGURATION_CMD = 0x98
+ * This command is used to configure valid Tx antenna.
+ * By default uCode concludes the valid antenna according to the radio flavor.
+ * This command enables the driver to override/modify this conclusion.
+ */
+struct iwl_tx_ant_config_cmd {
+	__le32 valid;
+} __attribute__ ((packed));
+
 /******************************************************************************
  * (0a)
  * Alive and Error Commands & Responses:
@@ -793,7 +807,7 @@
 	struct iwl3945_power_per_rate power[IWL_MAX_RATES];
 } __attribute__ ((packed));
 
-struct iwl_channel_switch_cmd {
+struct iwl4965_channel_switch_cmd {
 	u8 band;
 	u8 expect_beacon;
 	__le16 channel;
@@ -803,6 +817,48 @@
 	struct iwl4965_tx_power_db tx_power;
 } __attribute__ ((packed));
 
+/**
+ * struct iwl5000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ *		   1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl5000_channel_switch_cmd {
+	u8 band;
+	u8 expect_beacon;
+	__le16 channel;
+	__le32 rxon_flags;
+	__le32 rxon_filter_flags;
+	__le32 switch_time;
+	__le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __attribute__ ((packed));
+
+/**
+ * struct iwl6000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ *		   1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl6000_channel_switch_cmd {
+	u8 band;
+	u8 expect_beacon;
+	__le16 channel;
+	__le32 rxon_flags;
+	__le32 rxon_filter_flags;
+	__le32 switch_time;
+	__le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __attribute__ ((packed));
+
 /*
  * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
  */
@@ -921,6 +977,7 @@
 #define	STA_MODIFY_TX_RATE_MSK		0x04
 #define STA_MODIFY_ADDBA_TID_MSK	0x08
 #define STA_MODIFY_DELBA_TID_MSK	0x10
+#define STA_MODIFY_SLEEP_TX_COUNT_MSK	0x20
 
 /* Receiver address (actually, Rx station's index into station table),
  * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
@@ -1051,7 +1108,14 @@
 	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
 	__le16 add_immediate_ba_ssn;
 
-	__le32 reserved2;
+	/*
+	 * Number of packets OK to transmit to station even though
+	 * it is asleep -- used to synchronise PS-poll and u-APSD
+	 * responses while ucode keeps track of STA sleep state.
+	 */
+	__le16 sleep_tx_count;
+
+	__le16 reserved2;
 } __attribute__ ((packed));
 
 /* 5000 */
@@ -1082,7 +1146,14 @@
 	 * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
 	__le16 add_immediate_ba_ssn;
 
-	__le32 reserved2;
+	/*
+	 * Number of packets OK to transmit to station even though
+	 * it is asleep -- used to synchronise PS-poll and u-APSD
+	 * responses while ucode keeps track of STA sleep state.
+	 */
+	__le16 sleep_tx_count;
+
+	__le16 reserved2;
 } __attribute__ ((packed));
 
 
@@ -1634,6 +1705,21 @@
 	TX_ABORT_REQUIRED_MSK = 0x80000000,	/* bits 31:31 */
 };
 
+static inline u32 iwl_tx_status_to_mac80211(u32 status)
+{
+	status &= TX_STATUS_MSK;
+
+	switch (status) {
+	case TX_STATUS_SUCCESS:
+	case TX_STATUS_DIRECT_DONE:
+		return IEEE80211_TX_STAT_ACK;
+	case TX_STATUS_FAIL_DEST_PS:
+		return IEEE80211_TX_STAT_TX_FILTERED;
+	default:
+		return 0;
+	}
+}
+
 static inline bool iwl_is_tx_success(u32 status)
 {
 	status &= TX_STATUS_MSK;
@@ -2162,6 +2248,19 @@
 	__le32 reserved2;
 } __attribute__ ((packed));
 
+#define BT_COEX_DISABLE (0x0)
+#define BT_COEX_MODE_2W (0x1)
+#define BT_COEX_MODE_3W (0x2)
+#define BT_COEX_MODE_4W (0x3)
+
+#define BT_LEAD_TIME_MIN (0x0)
+#define BT_LEAD_TIME_DEF (0x1E)
+#define BT_LEAD_TIME_MAX (0xFF)
+
+#define BT_MAX_KILL_MIN (0x1)
+#define BT_MAX_KILL_DEF (0x5)
+#define BT_MAX_KILL_MAX (0xFF)
+
 /*
  * REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
  *
@@ -2497,9 +2596,10 @@
 /**
  * struct iwl_ssid_ie - directed scan network information element
  *
- * Up to 4 of these may appear in REPLY_SCAN_CMD, selected by "type" field
- * in struct iwl_scan_channel; each channel may select different ssids from
- * among the 4 entries.  SSID IEs get transmitted in reverse order of entry.
+ * Up to 20 of these may appear in REPLY_SCAN_CMD (Note: Only 4 are in
+ * 3945 SCAN api), selected by "type" bit field in struct iwl_scan_channel;
+ * each channel may select different ssids from among the 20 (4) entries.
+ * SSID IEs get transmitted in reverse order of entry.
  */
 struct iwl_ssid_ie {
 	u8 id;
@@ -3001,6 +3101,10 @@
 	__le32 reserved3;
 } __attribute__ ((packed));
 
+#define UCODE_STATISTICS_CLEAR_MSK		(0x1 << 0)
+#define UCODE_STATISTICS_FREQUENCY_MSK		(0x1 << 1)
+#define UCODE_STATISTICS_NARROW_BAND_MSK	(0x1 << 2)
+
 /*
  * REPLY_STATISTICS_CMD = 0x9c,
  * 3945 and 4965 identical.
@@ -3237,12 +3341,6 @@
  *   Lower values mean higher energy; this means making sure that the value
  *   in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy".
  *
- * Driver should set the following entries to fixed values:
- *
- *   HD_MIN_ENERGY_OFDM_DET_INDEX               100
- *   HD_BARKER_CORR_TH_ADD_MIN_INDEX            190
- *   HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX        390
- *   HD_OFDM_ENERGY_TH_IN_INDEX                  62
  */
 
 /*
@@ -3440,30 +3538,134 @@
 } __attribute__ ((packed));
 
 /*
- * Coexistence WIFI/WIMAX  Command
- * COEX_PRIORITY_TABLE_CMD = 0x5a
- *
+ * station priority table entries
+ * also used as potential "events" value for both
+ * COEX_MEDIUM_NOTIFICATION and COEX_EVENT_CMD
  */
+
+/*
+ * COEX events entry flag masks
+ * RP - Requested Priority
+ * WP - Win Medium Priority: priority assigned when the contention has been won
+ */
+#define COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG        (0x1)
+#define COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG        (0x2)
+#define COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG  (0x4)
+
+#define COEX_CU_UNASSOC_IDLE_RP               4
+#define COEX_CU_UNASSOC_MANUAL_SCAN_RP        4
+#define COEX_CU_UNASSOC_AUTO_SCAN_RP          4
+#define COEX_CU_CALIBRATION_RP                4
+#define COEX_CU_PERIODIC_CALIBRATION_RP       4
+#define COEX_CU_CONNECTION_ESTAB_RP           4
+#define COEX_CU_ASSOCIATED_IDLE_RP            4
+#define COEX_CU_ASSOC_MANUAL_SCAN_RP          4
+#define COEX_CU_ASSOC_AUTO_SCAN_RP            4
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_RP         4
+#define COEX_CU_RF_ON_RP                      6
+#define COEX_CU_RF_OFF_RP                     4
+#define COEX_CU_STAND_ALONE_DEBUG_RP          6
+#define COEX_CU_IPAN_ASSOC_LEVEL_RP           4
+#define COEX_CU_RSRVD1_RP                     4
+#define COEX_CU_RSRVD2_RP                     4
+
+#define COEX_CU_UNASSOC_IDLE_WP               3
+#define COEX_CU_UNASSOC_MANUAL_SCAN_WP        3
+#define COEX_CU_UNASSOC_AUTO_SCAN_WP          3
+#define COEX_CU_CALIBRATION_WP                3
+#define COEX_CU_PERIODIC_CALIBRATION_WP       3
+#define COEX_CU_CONNECTION_ESTAB_WP           3
+#define COEX_CU_ASSOCIATED_IDLE_WP            3
+#define COEX_CU_ASSOC_MANUAL_SCAN_WP          3
+#define COEX_CU_ASSOC_AUTO_SCAN_WP            3
+#define COEX_CU_ASSOC_ACTIVE_LEVEL_WP         3
+#define COEX_CU_RF_ON_WP                      3
+#define COEX_CU_RF_OFF_WP                     3
+#define COEX_CU_STAND_ALONE_DEBUG_WP          6
+#define COEX_CU_IPAN_ASSOC_LEVEL_WP           3
+#define COEX_CU_RSRVD1_WP                     3
+#define COEX_CU_RSRVD2_WP                     3
+
+#define COEX_UNASSOC_IDLE_FLAGS                     0
+#define COEX_UNASSOC_MANUAL_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_UNASSOC_AUTO_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_CALIBRATION_FLAGS			\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_PERIODIC_CALIBRATION_FLAGS             0
+/*
+ * COEX_CONNECTION_ESTAB:
+ * we need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CONNECTION_ESTAB_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_ASSOCIATED_IDLE_FLAGS                  0
+#define COEX_ASSOC_MANUAL_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_AUTO_SCAN_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_ASSOC_ACTIVE_LEVEL_FLAGS               0
+#define COEX_RF_ON_FLAGS                            0
+#define COEX_RF_OFF_FLAGS                           0
+#define COEX_STAND_ALONE_DEBUG_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG)
+#define COEX_IPAN_ASSOC_LEVEL_FLAGS		\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	 COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+#define COEX_RSRVD1_FLAGS                           0
+#define COEX_RSRVD2_FLAGS                           0
+/*
+ * COEX_CU_RF_ON is the event wrapping all radio ownership.
+ * We need DELAY_MEDIUM_FREE_NTFY to let WiMAX disconnect from network.
+ */
+#define COEX_CU_RF_ON_FLAGS			\
+	(COEX_EVT_FLAG_MEDIUM_FREE_NTFY_FLG |	\
+	 COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_FLG |	\
+	 COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_FLG)
+
+
 enum {
+	/* un-association part */
 	COEX_UNASSOC_IDLE		= 0,
 	COEX_UNASSOC_MANUAL_SCAN	= 1,
 	COEX_UNASSOC_AUTO_SCAN		= 2,
+	/* calibration */
 	COEX_CALIBRATION		= 3,
 	COEX_PERIODIC_CALIBRATION	= 4,
+	/* connection */
 	COEX_CONNECTION_ESTAB		= 5,
+	/* association part */
 	COEX_ASSOCIATED_IDLE		= 6,
 	COEX_ASSOC_MANUAL_SCAN		= 7,
 	COEX_ASSOC_AUTO_SCAN		= 8,
 	COEX_ASSOC_ACTIVE_LEVEL		= 9,
+	/* RF ON/OFF */
 	COEX_RF_ON			= 10,
 	COEX_RF_OFF			= 11,
 	COEX_STAND_ALONE_DEBUG		= 12,
+	/* IPAN */
 	COEX_IPAN_ASSOC_LEVEL		= 13,
+	/* reserved */
 	COEX_RSRVD1			= 14,
 	COEX_RSRVD2			= 15,
 	COEX_NUM_OF_EVENTS		= 16
 };
 
+/*
+ * Coexistence WIFI/WIMAX  Command
+ * COEX_PRIORITY_TABLE_CMD = 0x5a
+ *
+ */
 struct iwl_wimax_coex_event_entry {
 	u8 request_prio;
 	u8 win_medium_prio;
@@ -3488,6 +3690,55 @@
 	struct iwl_wimax_coex_event_entry sta_prio[COEX_NUM_OF_EVENTS];
 } __attribute__ ((packed));
 
+/*
+ * Coexistence MEDIUM NOTIFICATION
+ * COEX_MEDIUM_NOTIFICATION = 0x5b
+ *
+ * notification from uCode to host to indicate medium changes
+ *
+ */
+/*
+ * status field
+ * bit 0 - 2: medium status
+ * bit 3: medium change indication
+ * bit 4 - 31: reserved
+ */
+/* status option values, (0 - 2 bits) */
+#define COEX_MEDIUM_BUSY	(0x0) /* radio belongs to WiMAX */
+#define COEX_MEDIUM_ACTIVE	(0x1) /* radio belongs to WiFi */
+#define COEX_MEDIUM_PRE_RELEASE	(0x2) /* received radio release */
+#define COEX_MEDIUM_MSK		(0x7)
+
+/* send notification status (1 bit) */
+#define COEX_MEDIUM_CHANGED	(0x8)
+#define COEX_MEDIUM_CHANGED_MSK	(0x8)
+#define COEX_MEDIUM_SHIFT	(3)
+
+struct iwl_coex_medium_notification {
+	__le32 status;
+	__le32 events;
+} __attribute__ ((packed));
+
+/*
+ * Coexistence EVENT  Command
+ * COEX_EVENT_CMD = 0x5c
+ *
+ * send from host to uCode for coex event request.
+ */
+/* flags options */
+#define COEX_EVENT_REQUEST_MSK	(0x1)
+
+struct iwl_coex_event_cmd {
+	u8 flags;
+	u8 event;
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct iwl_coex_event_resp {
+	__le32 status;
+} __attribute__ ((packed));
+
+
 /******************************************************************************
  * (13)
  * Union of all expected notifications/responses:
@@ -3495,6 +3746,16 @@
  *****************************************************************************/
 
 struct iwl_rx_packet {
+	/*
+	 * The first 4 bytes of the RX frame header contain both the RX frame
+	 * size and some flags.
+	 * Bit fields:
+	 * 31:    flag flush RB request
+	 * 30:    flag ignore TC (terminal counter) request
+	 * 29:    flag fast IRQ request
+	 * 28-14: Reserved
+	 * 13-00: RX frame size
+	 */
 	__le32 len_n_flags;
 	struct iwl_cmd_header hdr;
 	union {
@@ -3514,6 +3775,8 @@
 		struct iwl_notif_statistics stats;
 		struct iwl_compressed_ba_resp compressed_ba;
 		struct iwl_missed_beacon_notif missed_beacon;
+		struct iwl_coex_medium_notification coex_medium_notif;
+		struct iwl_coex_event_resp coex_event;
 		__le32 status;
 		u8 raw[0];
 	} u;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 2dc9287..574d366 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -47,6 +47,37 @@
 MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
 MODULE_LICENSE("GPL");
 
+static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = {
+	{COEX_CU_UNASSOC_IDLE_RP, COEX_CU_UNASSOC_IDLE_WP,
+	 0, COEX_UNASSOC_IDLE_FLAGS},
+	{COEX_CU_UNASSOC_MANUAL_SCAN_RP, COEX_CU_UNASSOC_MANUAL_SCAN_WP,
+	 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{COEX_CU_UNASSOC_AUTO_SCAN_RP, COEX_CU_UNASSOC_AUTO_SCAN_WP,
+	 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
+	{COEX_CU_CALIBRATION_RP, COEX_CU_CALIBRATION_WP,
+	 0, COEX_CALIBRATION_FLAGS},
+	{COEX_CU_PERIODIC_CALIBRATION_RP, COEX_CU_PERIODIC_CALIBRATION_WP,
+	 0, COEX_PERIODIC_CALIBRATION_FLAGS},
+	{COEX_CU_CONNECTION_ESTAB_RP, COEX_CU_CONNECTION_ESTAB_WP,
+	 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{COEX_CU_ASSOCIATED_IDLE_RP, COEX_CU_ASSOCIATED_IDLE_WP,
+	 0, COEX_ASSOCIATED_IDLE_FLAGS},
+	{COEX_CU_ASSOC_MANUAL_SCAN_RP, COEX_CU_ASSOC_MANUAL_SCAN_WP,
+	 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
+	{COEX_CU_ASSOC_AUTO_SCAN_RP, COEX_CU_ASSOC_AUTO_SCAN_WP,
+	 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
+	{COEX_CU_ASSOC_ACTIVE_LEVEL_RP, COEX_CU_ASSOC_ACTIVE_LEVEL_WP,
+	 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
+	{COEX_CU_RF_ON_RP, COEX_CU_RF_ON_WP, 0, COEX_CU_RF_ON_FLAGS},
+	{COEX_CU_RF_OFF_RP, COEX_CU_RF_OFF_WP, 0, COEX_RF_OFF_FLAGS},
+	{COEX_CU_STAND_ALONE_DEBUG_RP, COEX_CU_STAND_ALONE_DEBUG_WP,
+	 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{COEX_CU_IPAN_ASSOC_LEVEL_RP, COEX_CU_IPAN_ASSOC_LEVEL_WP,
+	 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
+	{COEX_CU_RSRVD1_RP, COEX_CU_RSRVD1_WP, 0, COEX_RSRVD1_FLAGS},
+	{COEX_CU_RSRVD2_RP, COEX_CU_RSRVD2_WP, 0, COEX_RSRVD2_FLAGS}
+};
+
 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
 	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
 				    IWL_RATE_SISO_##s##M_PLCP, \
@@ -178,6 +209,7 @@
 	}
 	return ant;
 }
+EXPORT_SYMBOL(iwl_toggle_tx_ant);
 
 const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 EXPORT_SYMBOL(iwl_bcast_addr);
@@ -224,7 +256,10 @@
 	/* nic_init */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->cfg->ops->lib->apm_ops.init(priv);
-	iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
+
+	/* Set interrupt coalescing timer to 512 usecs */
+	iwl_write8(priv, CSR_INT_COALESCING, 512 / 32);
+
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
@@ -416,8 +451,7 @@
 		ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
 	ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
 	ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
-			     (WLAN_HT_CAP_SM_PS_DISABLED << 2));
-
+			     (priv->cfg->sm_ps_mode << 2));
 	max_bit_rate = MAX_BIT_RATE_20_MHZ;
 	if (priv->hw_params.ht40_channel & BIT(band)) {
 		ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
@@ -452,28 +486,6 @@
 	}
 }
 
-static void iwlcore_init_hw_rates(struct iwl_priv *priv,
-			      struct ieee80211_rate *rates)
-{
-	int i;
-
-	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
-		rates[i].bitrate = iwl_rates[i].ieee * 5;
-		rates[i].hw_value = i; /* Rate scaling will work on indexes */
-		rates[i].hw_value_short = i;
-		rates[i].flags = 0;
-		if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) {
-			/*
-			 * If CCK != 1M then set short preamble rate flag.
-			 */
-			rates[i].flags |=
-				(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
-					0 : IEEE80211_RATE_SHORT_PREAMBLE;
-		}
-	}
-}
-
-
 /**
  * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
  */
@@ -605,11 +617,27 @@
 }
 EXPORT_SYMBOL(iwlcore_free_geos);
 
+/*
+ *  iwlcore_rts_tx_cmd_flag: Set rts/cts. 3945 and 4965 only share this
+ *  function.
+ */
+void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+				__le32 *tx_flags)
+{
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		*tx_flags |= TX_CMD_FLG_RTS_MSK;
+		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+		*tx_flags |= TX_CMD_FLG_CTS_MSK;
+	}
+}
+EXPORT_SYMBOL(iwlcore_rts_tx_cmd_flag);
+
 static bool is_single_rx_stream(struct iwl_priv *priv)
 {
 	return !priv->current_ht_config.is_ht ||
-	       ((priv->current_ht_config.mcs.rx_mask[1] == 0) &&
-		(priv->current_ht_config.mcs.rx_mask[2] == 0));
+	       priv->current_ht_config.single_chain_sufficient;
 }
 
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
@@ -635,10 +663,9 @@
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf)
 {
-	struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 
-	if ((!iwl_ht_conf->is_ht) ||
-	    (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ))
+	if (!ht_conf->is_ht || !ht_conf->is_40mhz)
 		return 0;
 
 	/* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
@@ -654,7 +681,7 @@
 #endif
 	return iwl_is_channel_extension(priv, priv->band,
 			le16_to_cpu(priv->staging_rxon.channel),
-			iwl_ht_conf->extension_chan_offset);
+			ht_conf->extension_chan_offset);
 }
 EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
 
@@ -878,11 +905,11 @@
 }
 EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
 
-void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
 {
 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
 
-	if (!ht_info->is_ht) {
+	if (!ht_conf->is_ht) {
 		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
 			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
 			RXON_FLG_HT40_PROT_MSK |
@@ -893,7 +920,7 @@
 	/* FIXME: if the definition of ht_protection changed, the "translation"
 	 * will be needed for rxon->flags
 	 */
-	rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
+	rxon->flags |= cpu_to_le32(ht_conf->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
 
 	/* Set up channel bandwidth:
 	 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
@@ -902,10 +929,10 @@
 			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
 	if (iwl_is_ht40_tx_allowed(priv, NULL)) {
 		/* pure ht40 */
-		if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
+		if (ht_conf->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
 			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
 			/* Note: control channel is opposite of extension channel */
-			switch (ht_info->extension_chan_offset) {
+			switch (ht_conf->extension_chan_offset) {
 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 				rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
 				break;
@@ -915,7 +942,7 @@
 			}
 		} else {
 			/* Note: control channel is opposite of extension channel */
-			switch (ht_info->extension_chan_offset) {
+			switch (ht_conf->extension_chan_offset) {
 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 				rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
 				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
@@ -938,14 +965,10 @@
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
 		priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
-	IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X "
-			"rxon flags 0x%X operation mode :0x%X "
+	IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X "
 			"extension channel offset 0x%x\n",
-			ht_info->mcs.rx_mask[0],
-			ht_info->mcs.rx_mask[1],
-			ht_info->mcs.rx_mask[2],
-			le32_to_cpu(rxon->flags), ht_info->ht_protection,
-			ht_info->extension_chan_offset);
+			le32_to_cpu(rxon->flags), ht_conf->ht_protection,
+			ht_conf->extension_chan_offset);
 	return;
 }
 EXPORT_SYMBOL(iwl_set_rxon_ht);
@@ -955,44 +978,50 @@
 #define IWL_NUM_IDLE_CHAINS_DUAL	2
 #define IWL_NUM_IDLE_CHAINS_SINGLE	1
 
-/* Determine how many receiver/antenna chains to use.
- * More provides better reception via diversity.  Fewer saves power.
+/*
+ * Determine how many receiver/antenna chains to use.
+ *
+ * More provides better reception via diversity.  Fewer saves power
+ * at the expense of throughput, but only when not in powersave to
+ * start with.
+ *
  * MIMO (dual stream) requires at least 2, but works better with 3.
  * This does not determine *which* chains to use, just how many.
  */
 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-	bool is_single = is_single_rx_stream(priv);
-	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
-
 	/* # of Rx chains to use when expecting MIMO. */
-	if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
-						 WLAN_HT_CAP_SM_PS_STATIC)))
+	if (is_single_rx_stream(priv))
 		return IWL_NUM_RX_CHAINS_SINGLE;
 	else
 		return IWL_NUM_RX_CHAINS_MULTIPLE;
 }
 
+/*
+ * When we are in power saving mode, unless device support spatial
+ * multiplexing power save, use the active count for rx chain count.
+ */
 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
 {
-	int idle_cnt;
+	int idle_cnt = active_cnt;
 	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+
 	/* # Rx chains when idling and maybe trying to save power */
-	switch (priv->current_ht_config.sm_ps) {
+	switch (priv->cfg->sm_ps_mode) {
 	case WLAN_HT_CAP_SM_PS_STATIC:
+		idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
+		break;
 	case WLAN_HT_CAP_SM_PS_DYNAMIC:
 		idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
-					IWL_NUM_IDLE_CHAINS_SINGLE;
+			IWL_NUM_IDLE_CHAINS_SINGLE;
 		break;
 	case WLAN_HT_CAP_SM_PS_DISABLED:
-		idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
 		break;
 	case WLAN_HT_CAP_SM_PS_INVALID:
 	default:
-		IWL_ERR(priv, "invalid mimo ps mode %d\n",
-			   priv->current_ht_config.sm_ps);
+		IWL_ERR(priv, "invalid sm_ps mode %u\n",
+			priv->cfg->sm_ps_mode);
 		WARN_ON(1);
-		idle_cnt = -1;
 		break;
 	}
 	return idle_cnt;
@@ -1005,7 +1034,7 @@
 	res = (chain_bitmap & BIT(0)) >> 0;
 	res += (chain_bitmap & BIT(1)) >> 1;
 	res += (chain_bitmap & BIT(2)) >> 2;
-	res += (chain_bitmap & BIT(4)) >> 4;
+	res += (chain_bitmap & BIT(3)) >> 3;
 	return res;
 }
 
@@ -1281,18 +1310,28 @@
 
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon;
 	struct iwl_csa_notification *csa = &(pkt->u.csa_notif);
-	IWL_DEBUG_11H(priv, "CSA notif: channel %d, status %d\n",
-		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
-	rxon->channel = csa->channel;
-	priv->staging_rxon.channel = csa->channel;
+
+	if (priv->switch_rxon.switch_in_progress) {
+		if (!le32_to_cpu(csa->status) &&
+		    (csa->channel == priv->switch_rxon.channel)) {
+			rxon->channel = csa->channel;
+			priv->staging_rxon.channel = csa->channel;
+			IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
+			      le16_to_cpu(csa->channel));
+		} else
+			IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+			      le16_to_cpu(csa->channel));
+
+		priv->switch_rxon.switch_in_progress = false;
+	}
 }
 EXPORT_SYMBOL(iwl_rx_csa);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-static void iwl_print_rx_config_cmd(struct iwl_priv *priv)
+void iwl_print_rx_config_cmd(struct iwl_priv *priv)
 {
 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
 
@@ -1310,6 +1349,7 @@
 	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
 	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
 }
+EXPORT_SYMBOL(iwl_print_rx_config_cmd);
 #endif
 /**
  * iwl_irq_handle_error - called for HW or SW error interrupt from card
@@ -1322,12 +1362,11 @@
 	/* Cancel currently queued command. */
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 
+	priv->cfg->ops->lib->dump_nic_error_log(priv);
+	priv->cfg->ops->lib->dump_nic_event_log(priv, false);
 #ifdef CONFIG_IWLWIFI_DEBUG
-	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) {
-		priv->cfg->ops->lib->dump_nic_error_log(priv);
-		priv->cfg->ops->lib->dump_nic_event_log(priv);
+	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS)
 		iwl_print_rx_config_cmd(priv);
-	}
 #endif
 
 	wake_up_interruptible(&priv->wait_command_queue);
@@ -1346,6 +1385,160 @@
 }
 EXPORT_SYMBOL(iwl_irq_handle_error);
 
+int iwl_apm_stop_master(struct iwl_priv *priv)
+{
+	int ret = 0;
+
+	/* stop device's busmaster DMA activity */
+	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
+
+	ret = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED,
+			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
+	if (ret)
+		IWL_WARN(priv, "Master Disable Timed Out, 100 usec\n");
+
+	IWL_DEBUG_INFO(priv, "stop master\n");
+
+	return ret;
+}
+EXPORT_SYMBOL(iwl_apm_stop_master);
+
+void iwl_apm_stop(struct iwl_priv *priv)
+{
+	IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
+
+	/* Stop device's DMA activity */
+	iwl_apm_stop_master(priv);
+
+	/* Reset the entire device */
+	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+	udelay(10);
+
+	/*
+	 * Clear "initialization complete" bit to move adapter from
+	 * D0A* (powered-up Active) --> D0U* (Uninitialized) state.
+	 */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+}
+EXPORT_SYMBOL(iwl_apm_stop);
+
+
+/*
+ * Start up NIC's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via iwl_apm_stop())
+ * NOTE:  This does not load uCode nor start the embedded processor
+ */
+int iwl_apm_init(struct iwl_priv *priv)
+{
+	int ret = 0;
+	u16 lctl;
+
+	IWL_DEBUG_INFO(priv, "Init card's basic functions\n");
+
+	/*
+	 * Use "set_bit" below rather than "write", to preserve any hardware
+	 * bits already set by default after reset.
+	 */
+
+	/* Disable L0S exit timer (platform NMI Work/Around) */
+	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+	/*
+	 * Disable L0s without affecting L1;
+	 *  don't wait for ICH L0s (ICH bug W/A)
+	 */
+	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
+	/* Set FH wait threshold to maximum (HW error during stress W/A) */
+	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
+
+	/*
+	 * Enable HAP INTA (interrupt from management bus) to
+	 * wake device's PCI Express link L1a -> L0s
+	 * NOTE:  This is no-op for 3945 (non-existant bit)
+	 */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+				    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
+
+	/*
+	 * HW bug W/A for instability in PCIe bus L0->L0S->L1 transition.
+	 * Check if BIOS (or OS) enabled L1-ASPM on this device.
+	 * If so (likely), disable L0S, so device moves directly L0->L1;
+	 *    costs negligible amount of power savings.
+	 * If not (unlikely), enable L0S, so there is at least some
+	 *    power savings, even without L1.
+	 */
+	if (priv->cfg->set_l0s) {
+		lctl = iwl_pcie_link_ctl(priv);
+		if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+					PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+			/* L1-ASPM enabled; disable(!) L0S  */
+			iwl_set_bit(priv, CSR_GIO_REG,
+					CSR_GIO_REG_VAL_L0S_ENABLED);
+			IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
+		} else {
+			/* L1-ASPM disabled; enable(!) L0S */
+			iwl_clear_bit(priv, CSR_GIO_REG,
+					CSR_GIO_REG_VAL_L0S_ENABLED);
+			IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
+		}
+	}
+
+	/* Configure analog phase-lock-loop before activating to D0A */
+	if (priv->cfg->pll_cfg_val)
+		iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val);
+
+	/*
+	 * Set "initialization complete" bit to move adapter from
+	 * D0U* --> D0A* (powered-up active) state.
+	 */
+	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/*
+	 * Wait for clock stabilization; once stabilized, access to
+	 * device-internal resources is supported, e.g. iwl_write_prph()
+	 * and accesses to uCode SRAM.
+	 */
+	ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+	if (ret < 0) {
+		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
+		goto out;
+	}
+
+	/*
+	 * Enable DMA and BSM (if used) clocks, wait for them to stabilize.
+	 * BSM (Boostrap State Machine) is only in 3945 and 4965;
+	 * later devices (i.e. 5000 and later) have non-volatile SRAM,
+	 * and don't need BSM to restore data after power-saving sleep.
+	 *
+	 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
+	 * do not disable clocks.  This preserves any hardware bits already
+	 * set by default in "CLK_CTRL_REG" after reset.
+	 */
+	if (priv->cfg->use_bsm)
+		iwl_write_prph(priv, APMG_CLK_EN_REG,
+			APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
+	else
+		iwl_write_prph(priv, APMG_CLK_EN_REG,
+			APMG_CLK_VAL_DMA_CLK_RQT);
+	udelay(20);
+
+	/* Disable L1-Active */
+	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
+			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(iwl_apm_init);
+
+
+
 void iwl_configure_filter(struct ieee80211_hw *hw,
 			  unsigned int changed_flags,
 			  unsigned int *total_flags,
@@ -1393,73 +1586,14 @@
 }
 EXPORT_SYMBOL(iwl_configure_filter);
 
-int iwl_setup_mac(struct iwl_priv *priv)
-{
-	int ret;
-	struct ieee80211_hw *hw = priv->hw;
-	hw->rate_control_algorithm = "iwl-agn-rs";
-
-	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		    IEEE80211_HW_NOISE_DBM |
-		    IEEE80211_HW_AMPDU_AGGREGATION |
-		    IEEE80211_HW_SPECTRUM_MGMT;
-
-	if (!priv->cfg->broken_powersave)
-		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
-			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
-
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC);
-
-	hw->wiphy->custom_regulatory = true;
-
-	/* Firmware does not support this */
-	hw->wiphy->disable_beacon_hints = true;
-
-	/*
-	 * For now, disable PS by default because it affects
-	 * RX performance significantly.
-	 */
-	hw->wiphy->ps_default = false;
-
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
-	/* we create the 802.11 header and a zero-length SSID element */
-	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
-
-	/* Default value; 4 EDCA QOS priorities */
-	hw->queues = 4;
-
-	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
-
-	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
-		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&priv->bands[IEEE80211_BAND_2GHZ];
-	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
-		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&priv->bands[IEEE80211_BAND_5GHZ];
-
-	ret = ieee80211_register_hw(priv->hw);
-	if (ret) {
-		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
-		return ret;
-	}
-	priv->mac80211_registered = 1;
-
-	return 0;
-}
-EXPORT_SYMBOL(iwl_setup_mac);
-
 int iwl_set_hw_params(struct iwl_priv *priv)
 {
 	priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
 	priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
 	if (priv->cfg->mod_params->amsdu_size_8K)
-		priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
+		priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
 	else
-		priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
-	priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
+		priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
 
 	priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
 
@@ -1471,71 +1605,6 @@
 }
 EXPORT_SYMBOL(iwl_set_hw_params);
 
-int iwl_init_drv(struct iwl_priv *priv)
-{
-	int ret;
-
-	priv->ibss_beacon = NULL;
-
-	spin_lock_init(&priv->lock);
-	spin_lock_init(&priv->sta_lock);
-	spin_lock_init(&priv->hcmd_lock);
-
-	INIT_LIST_HEAD(&priv->free_frames);
-
-	mutex_init(&priv->mutex);
-
-	/* Clear the driver's (not device's) station table */
-	iwl_clear_stations_table(priv);
-
-	priv->data_retry_limit = -1;
-	priv->ieee_channels = NULL;
-	priv->ieee_rates = NULL;
-	priv->band = IEEE80211_BAND_2GHZ;
-
-	priv->iw_mode = NL80211_IFTYPE_STATION;
-
-	priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
-
-	/* Choose which receivers/antennas to use */
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
-	iwl_init_scan_params(priv);
-
-	iwl_reset_qos(priv);
-
-	priv->qos_data.qos_active = 0;
-	priv->qos_data.qos_cap.val = 0;
-
-	priv->rates_mask = IWL_RATES_MASK;
-	/* Set the tx_power_user_lmt to the lowest power level
-	 * this value will get overwritten by channel max power avg
-	 * from eeprom */
-	priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN;
-
-	ret = iwl_init_channel_map(priv);
-	if (ret) {
-		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);
-		goto err;
-	}
-
-	ret = iwlcore_init_geos(priv);
-	if (ret) {
-		IWL_ERR(priv, "initializing geos failed: %d\n", ret);
-		goto err_free_channel_map;
-	}
-	iwlcore_init_hw_rates(priv, priv->ieee_rates);
-
-	return 0;
-
-err_free_channel_map:
-	iwl_free_channel_map(priv);
-err:
-	return ret;
-}
-EXPORT_SYMBOL(iwl_init_drv);
-
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 {
 	int ret = 0;
@@ -1583,15 +1652,6 @@
 }
 EXPORT_SYMBOL(iwl_set_tx_power);
 
-void iwl_uninit_drv(struct iwl_priv *priv)
-{
-	iwl_calib_free_results(priv);
-	iwlcore_free_geos(priv);
-	iwl_free_channel_map(priv);
-	kfree(priv->scan);
-}
-EXPORT_SYMBOL(iwl_uninit_drv);
-
 #define ICT_COUNT (PAGE_SIZE/sizeof(u32))
 
 /* Free dram table */
@@ -1915,9 +1975,9 @@
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
 	struct iwl_bt_cmd bt_cmd = {
-		.flags = 3,
-		.lead_time = 0xAA,
-		.max_kill = 1,
+		.flags = BT_COEX_MODE_4W,
+		.lead_time = BT_LEAD_TIME_DEF,
+		.max_kill = BT_MAX_KILL_DEF,
 		.kill_ack_mask = 0,
 		.kill_cts_mask = 0,
 	};
@@ -1927,16 +1987,21 @@
 }
 EXPORT_SYMBOL(iwl_send_bt_config);
 
-int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
+int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags, bool clear)
 {
-	u32 stat_flags = 0;
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_STATISTICS_CMD,
-		.flags = flags,
-		.len = sizeof(stat_flags),
-		.data = (u8 *) &stat_flags,
+	struct iwl_statistics_cmd statistics_cmd = {
+		.configuration_flags =
+			clear ? IWL_STATS_CONF_CLEAR_STATS : 0,
 	};
-	return iwl_send_cmd(priv, &cmd);
+
+	if (flags & CMD_ASYNC)
+		return iwl_send_cmd_pdu_async(priv, REPLY_STATISTICS_CMD,
+					       sizeof(struct iwl_statistics_cmd),
+					       &statistics_cmd, NULL);
+	else
+		return iwl_send_cmd_pdu(priv, REPLY_STATISTICS_CMD,
+					sizeof(struct iwl_statistics_cmd),
+					&statistics_cmd);
 }
 EXPORT_SYMBOL(iwl_send_statistics_request);
 
@@ -2077,10 +2142,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 	priv->thermal_throttle.ct_kill_toggle = false;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_1000:
-	case CSR_HW_REV_TYPE_6x00:
-	case CSR_HW_REV_TYPE_6x50:
+	if (priv->cfg->support_ct_kill_exit) {
 		adv_cmd.critical_temperature_enter =
 			cpu_to_le32(priv->hw_params.ct_kill_threshold);
 		adv_cmd.critical_temperature_exit =
@@ -2097,8 +2159,7 @@
 					"exit is %d\n",
 				       priv->hw_params.ct_kill_threshold,
 				       priv->hw_params.ct_kill_exit_threshold);
-		break;
-	default:
+	} else {
 		cmd.critical_temperature_R =
 			cpu_to_le32(priv->hw_params.ct_kill_threshold);
 
@@ -2111,7 +2172,6 @@
 					"succeeded, "
 					"critical temperature is %d\n",
 					priv->hw_params.ct_kill_threshold);
-		break;
 	}
 }
 EXPORT_SYMBOL(iwl_rf_kill_ct_config);
@@ -2143,7 +2203,7 @@
 			   struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
 	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
 		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
@@ -2154,7 +2214,7 @@
 void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
 				      struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
 	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
 			"notification for %s:\n", len,
@@ -2166,7 +2226,7 @@
 void iwl_rx_reply_error(struct iwl_priv *priv,
 			struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 
 	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
 		"seq 0x%04X ser 0x%08X\n",
@@ -2228,42 +2288,58 @@
 EXPORT_SYMBOL(iwl_mac_conf_tx);
 
 static void iwl_ht_conf(struct iwl_priv *priv,
-			    struct ieee80211_bss_conf *bss_conf)
+			struct ieee80211_bss_conf *bss_conf)
 {
-	struct ieee80211_sta_ht_cap *ht_conf;
-	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 	struct ieee80211_sta *sta;
 
 	IWL_DEBUG_MAC80211(priv, "enter: \n");
 
-	if (!iwl_conf->is_ht)
+	if (!ht_conf->is_ht)
 		return;
 
-
-	/*
-	 * It is totally wrong to base global information on something
-	 * that is valid only when associated, alas, this driver works
-	 * that way and I don't know how to fix it.
-	 */
-
-	rcu_read_lock();
-	sta = ieee80211_find_sta(priv->hw, priv->bssid);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-	ht_conf = &sta->ht_cap;
-
-	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
-
-	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
-
-	iwl_conf->ht_protection =
+	ht_conf->ht_protection =
 		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
-	iwl_conf->non_GF_STA_present =
+	ht_conf->non_GF_STA_present =
 		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 
-	rcu_read_unlock();
+	ht_conf->single_chain_sufficient = false;
+
+	switch (priv->iw_mode) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(priv->vif, priv->bssid);
+		if (sta) {
+			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+			int maxstreams;
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if ((ht_cap->mcs.rx_mask[1] == 0) &&
+			    (ht_cap->mcs.rx_mask[2] == 0))
+				ht_conf->single_chain_sufficient = true;
+			if (maxstreams <= 1)
+				ht_conf->single_chain_sufficient = true;
+		} else {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			ht_conf->single_chain_sufficient = true;
+		}
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ht_conf->single_chain_sufficient = true;
+		break;
+	default:
+		break;
+	}
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
@@ -2387,6 +2463,8 @@
 			priv->timestamp = bss_conf->timestamp;
 			priv->assoc_capability = bss_conf->assoc_capability;
 
+			iwl_led_associate(priv);
+
 			/*
 			 * We have just associated, don't start scan too early
 			 * leave time for EAPOL exchange to complete.
@@ -2397,9 +2475,20 @@
 					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
 			if (!iwl_is_rfkill(priv))
 				priv->cfg->ops->lib->post_associate(priv);
-		} else
+		} else {
 			priv->assoc_id = 0;
+			iwl_led_disassociate(priv);
 
+			/*
+			 * inform the ucode that there is no longer an
+			 * association and that no more packets should be
+			 * send
+			 */
+			priv->staging_rxon.filter_flags &=
+				~RXON_FILTER_ASSOC_MSK;
+			priv->staging_rxon.assoc_id = 0;
+			iwlcore_commit_rxon(priv);
+		}
 	}
 
 	if (changes && iwl_is_associated(priv) && priv->assoc_id) {
@@ -2414,6 +2503,14 @@
 		}
 	}
 
+	if ((changes & BSS_CHANGED_BEACON_ENABLED) &&
+	    vif->bss_conf.enable_beacon) {
+		memcpy(priv->staging_rxon.bssid_addr,
+		       bss_conf->bssid, ETH_ALEN);
+		memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+		iwlcore_config_ap(priv);
+	}
+
 	mutex_unlock(&priv->mutex);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
@@ -2570,7 +2667,7 @@
 	struct iwl_priv *priv = hw->priv;
 	const struct iwl_channel_info *ch_info;
 	struct ieee80211_conf *conf = &hw->conf;
-	struct iwl_ht_info *ht_conf = &priv->current_ht_config;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 	unsigned long flags = 0;
 	int ret = 0;
 	u16 ch;
@@ -2620,21 +2717,18 @@
 			if (conf_is_ht40_minus(conf)) {
 				ht_conf->extension_chan_offset =
 					IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-				ht_conf->supported_chan_width =
-					IWL_CHANNEL_WIDTH_40MHZ;
+				ht_conf->is_40mhz = true;
 			} else if (conf_is_ht40_plus(conf)) {
 				ht_conf->extension_chan_offset =
 					IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-				ht_conf->supported_chan_width =
-					IWL_CHANNEL_WIDTH_40MHZ;
+				ht_conf->is_40mhz = true;
 			} else {
 				ht_conf->extension_chan_offset =
 					IEEE80211_HT_PARAM_CHA_SEC_NONE;
-				ht_conf->supported_chan_width =
-					IWL_CHANNEL_WIDTH_20MHZ;
+				ht_conf->is_40mhz = false;
 			}
 		} else
-			ht_conf->supported_chan_width = IWL_CHANNEL_WIDTH_20MHZ;
+			ht_conf->is_40mhz = false;
 		/* Default to no protection. Protection mode will later be set
 		 * from BSS config in iwl_ht_conf */
 		ht_conf->ht_protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
@@ -2649,6 +2743,22 @@
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
 		spin_unlock_irqrestore(&priv->lock, flags);
+		if (iwl_is_associated(priv) &&
+		    (le16_to_cpu(priv->active_rxon.channel) != ch) &&
+		    priv->cfg->ops->lib->set_channel_switch) {
+			iwl_set_rate(priv);
+			/*
+			 * at this point, staging_rxon has the
+			 * configuration for channel switch
+			 */
+			ret = priv->cfg->ops->lib->set_channel_switch(priv,
+				ch);
+			if (!ret) {
+				iwl_print_rx_config_cmd(priv);
+				goto out;
+			}
+			priv->switch_rxon.switch_in_progress = false;
+		}
  set_ch_out:
 		/* The list of supported rates and rate mask can be different
 		 * for each band; since the band may have changed, reset
@@ -2656,7 +2766,8 @@
 		iwl_set_rate(priv);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
+	if (changed & (IEEE80211_CONF_CHANGE_PS |
+			IEEE80211_CONF_CHANGE_IDLE)) {
 		ret = iwl_power_update_mode(priv, false);
 		if (ret)
 			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
@@ -2740,7 +2851,7 @@
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
+	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	iwl_reset_qos(priv);
@@ -2792,6 +2903,55 @@
 }
 EXPORT_SYMBOL(iwl_mac_reset_tsf);
 
+int iwl_alloc_txq_mem(struct iwl_priv *priv)
+{
+	if (!priv->txq)
+		priv->txq = kzalloc(
+			sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
+			GFP_KERNEL);
+	if (!priv->txq) {
+		IWL_ERR(priv, "Not enough memory for txq \n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_txq_mem);
+
+void iwl_free_txq_mem(struct iwl_priv *priv)
+{
+	kfree(priv->txq);
+	priv->txq = NULL;
+}
+EXPORT_SYMBOL(iwl_free_txq_mem);
+
+int iwl_send_wimax_coex(struct iwl_priv *priv)
+{
+	struct iwl_wimax_coex_cmd uninitialized_var(coex_cmd);
+
+	if (priv->cfg->support_wimax_coexist) {
+		/* UnMask wake up src at associated sleep */
+		coex_cmd.flags |= COEX_FLAGS_ASSOC_WA_UNMASK_MSK;
+
+		/* UnMask wake up src at unassociated sleep */
+		coex_cmd.flags |= COEX_FLAGS_UNASSOC_WA_UNMASK_MSK;
+		memcpy(coex_cmd.sta_prio, cu_priorities,
+			sizeof(struct iwl_wimax_coex_event_entry) *
+			 COEX_NUM_OF_EVENTS);
+
+		/* enabling the coexistence feature */
+		coex_cmd.flags |= COEX_FLAGS_COEX_ENABLE_MSK;
+
+		/* enabling the priorities tables */
+		coex_cmd.flags |= COEX_FLAGS_STA_TABLE_VALID_MSK;
+	} else {
+		/* coexistence is disabled */
+		memset(&coex_cmd, 0, sizeof(coex_cmd));
+	}
+	return iwl_send_cmd_pdu(priv, COEX_PRIORITY_TABLE_CMD,
+				sizeof(coex_cmd), &coex_cmd);
+}
+EXPORT_SYMBOL(iwl_send_wimax_coex);
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 
 #define IWL_TRAFFIC_DUMP_SIZE	(IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
@@ -2929,15 +3089,11 @@
 	}
 }
 
-void iwl_clear_tx_stats(struct iwl_priv *priv)
+void iwl_clear_traffic_stats(struct iwl_priv *priv)
 {
 	memset(&priv->tx_stats, 0, sizeof(struct traffic_stats));
-
-}
-
-void iwl_clear_rx_stats(struct iwl_priv *priv)
-{
 	memset(&priv->rx_stats, 0, sizeof(struct traffic_stats));
+	priv->led_tpt = 0;
 }
 
 /*
@@ -3030,6 +3186,7 @@
 		stats->data_cnt++;
 		stats->data_bytes += len;
 	}
+	iwl_leds_background(priv);
 }
 EXPORT_SYMBOL(iwl_update_stats);
 #endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 7754538..675b7df 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -63,6 +63,8 @@
 #ifndef __iwl_core_h__
 #define __iwl_core_h__
 
+#include <linux/utsrelease.h>
+
 /************************
  * forward declarations *
  ************************/
@@ -70,7 +72,7 @@
 struct iwl_cmd;
 
 
-#define IWLWIFI_VERSION "1.3.27k"
+#define IWLWIFI_VERSION UTS_RELEASE "-k"
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2009 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
 
@@ -89,6 +91,7 @@
 	int (*rxon_assoc)(struct iwl_priv *priv);
 	int (*commit_rxon)(struct iwl_priv *priv);
 	void (*set_rxon_chain)(struct iwl_priv *priv);
+	int (*set_tx_ant)(struct iwl_priv *priv, u8 valid_tx_ant);
 };
 
 struct iwl_hcmd_utils_ops {
@@ -97,7 +100,8 @@
 	void (*gain_computation)(struct iwl_priv *priv,
 			u32 *average_noise,
 			u16 min_average_noise_antennat_i,
-			u32 min_average_noise);
+			u32 min_average_noise,
+			u8 default_chain);
 	void (*chain_noise_reset)(struct iwl_priv *priv);
 	void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info,
 			__le32 *tx_flags);
@@ -107,7 +111,6 @@
 
 struct iwl_apm_ops {
 	int (*init)(struct iwl_priv *priv);
-	int (*reset)(struct iwl_priv *priv);
 	void (*stop)(struct iwl_priv *priv);
 	void (*config)(struct iwl_priv *priv);
 	int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
@@ -166,8 +169,9 @@
 	int (*is_valid_rtc_data_addr)(u32 addr);
 	/* 1st ucode load */
 	int (*load_ucode)(struct iwl_priv *priv);
-	void (*dump_nic_event_log)(struct iwl_priv *priv);
+	void (*dump_nic_event_log)(struct iwl_priv *priv, bool full_log);
 	void (*dump_nic_error_log)(struct iwl_priv *priv);
+	int (*set_channel_switch)(struct iwl_priv *priv, u16 channel);
 	/* power management */
 	struct iwl_apm_ops apm_ops;
 
@@ -185,18 +189,24 @@
 	struct iwl_temp_ops temp_ops;
 };
 
+struct iwl_led_ops {
+	int (*cmd)(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd);
+	int (*on)(struct iwl_priv *priv);
+	int (*off)(struct iwl_priv *priv);
+};
+
 struct iwl_ops {
 	const struct iwl_ucode_ops *ucode;
 	const struct iwl_lib_ops *lib;
 	const struct iwl_hcmd_ops *hcmd;
 	const struct iwl_hcmd_utils_ops *utils;
+	const struct iwl_led_ops *led;
 };
 
 struct iwl_mod_params {
 	int sw_crypto;		/* def: 0 = using hardware encryption */
 	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
-	int num_of_ampdu_queues;/* def: HW dependent */
 	int disable_11n;	/* def: 0 = 11n capabilities enabled */
 	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
 	int antenna;  		/* def: 0 = both antennas (use diversity) */
@@ -213,7 +223,15 @@
  * @pa_type: used by 6000 series only to identify the type of Power Amplifier
  * @max_ll_items: max number of OTP blocks
  * @shadow_ram_support: shadow support for OTP memory
+ * @led_compensation: compensate on the led on/off time per HW according
+ *	to the deviation to achieve the desired led frequency.
+ *	The detail algorithm is described in iwl-led.c
  * @use_rts_for_ht: use rts/cts protection for HT traffic
+ * @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
+ * @sm_ps_mode: spatial multiplexing power save mode
+ * @support_wimax_coexist: support wimax/wifi co-exist
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -245,18 +263,32 @@
 	int eeprom_size;
 	u16  eeprom_ver;
 	u16  eeprom_calib_ver;
+	int num_of_queues;	/* def: HW dependent */
+	int num_of_ampdu_queues;/* def: HW dependent */
 	const struct iwl_ops *ops;
 	const struct iwl_mod_params *mod_params;
 	u8   valid_tx_ant;
 	u8   valid_rx_ant;
-	bool need_pll_cfg;
+
+	/* for iwl_apm_init() */
+	u32 pll_cfg_val;
+	bool set_l0s;
+	bool use_bsm;
+
 	bool use_isr_legacy;
 	enum iwl_pa_type pa_type;
 	const u16 max_ll_items;
 	const bool shadow_ram_support;
 	const bool ht_greenfield_support;
+	u16 led_compensation;
 	const bool broken_powersave;
 	bool use_rts_for_ht;
+	int chain_noise_num_beacons;
+	const bool supports_idle;
+	bool adv_thermal_throttle;
+	bool support_ct_kill_exit;
+	u8 sm_ps_mode;
+	const bool support_wimax_coexist;
 };
 
 /***************************
@@ -275,7 +307,7 @@
 int iwl_full_rxon_required(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
-void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info);
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf);
 void iwl_set_flags_for_band(struct iwl_priv *priv, enum ieee80211_band band);
@@ -289,10 +321,7 @@
 			  unsigned int changed_flags,
 			  unsigned int *total_flags, u64 multicast);
 int iwl_hw_nic_init(struct iwl_priv *priv);
-int iwl_setup_mac(struct iwl_priv *priv);
 int iwl_set_hw_params(struct iwl_priv *priv);
-int iwl_init_drv(struct iwl_priv *priv);
-void iwl_uninit_drv(struct iwl_priv *priv);
 bool iwl_is_monitor_mode(struct iwl_priv *priv);
 void iwl_post_associate(struct iwl_priv *priv);
 void iwl_bss_info_changed(struct ieee80211_hw *hw,
@@ -311,6 +340,11 @@
 int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
 			 struct ieee80211_tx_queue_stats *stats);
 void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
+int iwl_alloc_txq_mem(struct iwl_priv *priv);
+void iwl_free_txq_mem(struct iwl_priv *priv);
+void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+				__le32 *tx_flags);
+int iwl_send_wimax_coex(struct iwl_priv *priv);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 int iwl_alloc_traffic_mem(struct iwl_priv *priv);
 void iwl_free_traffic_mem(struct iwl_priv *priv);
@@ -321,8 +355,7 @@
 				u16 length, struct ieee80211_hdr *header);
 const char *get_mgmt_string(int cmd);
 const char *get_ctrl_string(int cmd);
-void iwl_clear_tx_stats(struct iwl_priv *priv);
-void iwl_clear_rx_stats(struct iwl_priv *priv);
+void iwl_clear_traffic_stats(struct iwl_priv *priv);
 void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc,
 		      u16 len);
 #else
@@ -358,6 +391,7 @@
 		/* data */
 		stats->data_bytes += len;
 	}
+	iwl_leds_background(priv);
 }
 #endif
 /*****************************************************
@@ -393,6 +427,8 @@
 			       struct iwl_rx_mem_buffer *rxb);
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb);
+void iwl_reply_statistics(struct iwl_priv *priv,
+			  struct iwl_rx_mem_buffer *rxb);
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
 
 /* TX helpers */
@@ -511,7 +547,7 @@
 			   const void *data,
 			   void (*callback)(struct iwl_priv *priv,
 					    struct iwl_device_cmd *cmd,
-					    struct sk_buff *skb));
+					    struct iwl_rx_packet *pkt));
 
 int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
 
@@ -544,15 +580,12 @@
 /*****************************************************
 *  Error Handling Debugging
 ******************************************************/
-#ifdef CONFIG_IWLWIFI_DEBUG
-void iwl_dump_nic_event_log(struct iwl_priv *priv);
 void iwl_dump_nic_error_log(struct iwl_priv *priv);
+void iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log);
+#ifdef CONFIG_IWLWIFI_DEBUG
+void iwl_print_rx_config_cmd(struct iwl_priv *priv);
 #else
-static inline void iwl_dump_nic_event_log(struct iwl_priv *priv)
-{
-}
-
-static inline void iwl_dump_nic_error_log(struct iwl_priv *priv)
+static inline void iwl_print_rx_config_cmd(struct iwl_priv *priv)
 {
 }
 #endif
@@ -571,6 +604,7 @@
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
+#define STATUS_CT_KILL		4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7
@@ -615,6 +649,11 @@
 	return iwl_is_rfkill_hw(priv);
 }
 
+static inline int iwl_is_ctkill(struct iwl_priv *priv)
+{
+	return test_bit(STATUS_CT_KILL, &priv->status);
+}
+
 static inline int iwl_is_ready_rf(struct iwl_priv *priv)
 {
 
@@ -626,7 +665,8 @@
 
 extern void iwl_rf_kill_ct_config(struct iwl_priv *priv);
 extern int iwl_send_bt_config(struct iwl_priv *priv);
-extern int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags);
+extern int iwl_send_statistics_request(struct iwl_priv *priv,
+				       u8 flags, bool clear);
 extern int iwl_verify_ucode(struct iwl_priv *priv);
 extern int iwl_send_lq_cmd(struct iwl_priv *priv,
 		struct iwl_link_quality_cmd *lq, u8 flags);
@@ -636,6 +676,9 @@
 				    struct iwl_rx_mem_buffer *rxb);
 void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 					   struct iwl_rx_mem_buffer *rxb);
+void iwl_apm_stop(struct iwl_priv *priv);
+int iwl_apm_stop_master(struct iwl_priv *priv);
+int iwl_apm_init(struct iwl_priv *priv);
 
 void iwl_setup_rxon_timing(struct iwl_priv *priv);
 static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
@@ -655,5 +698,4 @@
 {
 	return priv->hw->wiphy->bands[band];
 }
-
 #endif /* __iwl_core_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 06437d1..a7bfae0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -62,11 +62,29 @@
  *****************************************************************************/
 #ifndef __iwl_csr_h__
 #define __iwl_csr_h__
-/*=== CSR (control and status registers) ===*/
+/*
+ * CSR (control and status registers)
+ *
+ * CSR registers are mapped directly into PCI bus space, and are accessible
+ * whenever platform supplies power to device, even when device is in
+ * low power states due to driver-invoked device resets
+ * (e.g. CSR_RESET_REG_FLAG_SW_RESET) or uCode-driven power-saving modes.
+ *
+ * Use iwl_write32() and iwl_read32() family to access these registers;
+ * these provide simple PCI bus access, without waking up the MAC.
+ * Do not use iwl_write_direct32() family for these registers;
+ * no need to "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ.
+ * The MAC (uCode processor, etc.) does not need to be powered up for accessing
+ * the CSR registers.
+ *
+ * NOTE:  Newer devices using one-time-programmable (OTP) memory
+ *        require device to be awake in order to read this memory
+ *        via CSR_EEPROM and CSR_OTP registers
+ */
 #define CSR_BASE    (0x000)
 
 #define CSR_HW_IF_CONFIG_REG    (CSR_BASE+0x000) /* hardware interface config */
-#define CSR_INT_COALESCING     (CSR_BASE+0x004) /* accum ints, 32-usec units */
+#define CSR_INT_COALESCING      (CSR_BASE+0x004) /* accum ints, 32-usec units */
 #define CSR_INT                 (CSR_BASE+0x008) /* host interrupt status/ack */
 #define CSR_INT_MASK            (CSR_BASE+0x00c) /* host interrupt enable */
 #define CSR_FH_INT_STATUS       (CSR_BASE+0x010) /* busmaster int status/ack*/
@@ -74,43 +92,67 @@
 #define CSR_RESET               (CSR_BASE+0x020) /* busmaster enable, NMI, etc*/
 #define CSR_GP_CNTRL            (CSR_BASE+0x024)
 
+/* 2nd byte of CSR_INT_COALESCING, not accessible via iwl_write32()! */
+#define CSR_INT_PERIODIC_REG	(CSR_BASE+0x005)
+
 /*
  * Hardware revision info
  * Bit fields:
  * 31-8:  Reserved
- *  7-4:  Type of device:  0x0 = 4965, 0xd = 3945
+ *  7-4:  Type of device:  see CSR_HW_REV_TYPE_xxx definitions
  *  3-2:  Revision step:  0 = A, 1 = B, 2 = C, 3 = D
- *  1-0:  "Dash" value, as in A-1, etc.
+ *  1-0:  "Dash" (-) value, as in A-1, etc.
  *
  * NOTE:  Revision step affects calculation of CCK txpower for 4965.
+ * NOTE:  See also CSR_HW_REV_WA_REG (work-around for bug in 4965).
  */
 #define CSR_HW_REV              (CSR_BASE+0x028)
 
-/* EEPROM reads */
+/*
+ * EEPROM and OTP (one-time-programmable) memory reads
+ *
+ * NOTE:  For (newer) devices using OTP, device must be awake, initialized via
+ *        apm_ops.init() in order to read.  Older devices (3945/4965/5000)
+ *        use EEPROM and do not require this.
+ */
 #define CSR_EEPROM_REG          (CSR_BASE+0x02c)
 #define CSR_EEPROM_GP           (CSR_BASE+0x030)
 #define CSR_OTP_GP_REG   	(CSR_BASE+0x034)
+
 #define CSR_GIO_REG		(CSR_BASE+0x03C)
 #define CSR_GP_UCODE_REG	(CSR_BASE+0x048)
 #define CSR_GP_DRIVER_REG	(CSR_BASE+0x050)
+
+/*
+ * UCODE-DRIVER GP (general purpose) mailbox registers.
+ * SET/CLR registers set/clear bit(s) if "1" is written.
+ */
 #define CSR_UCODE_DRV_GP1       (CSR_BASE+0x054)
 #define CSR_UCODE_DRV_GP1_SET   (CSR_BASE+0x058)
 #define CSR_UCODE_DRV_GP1_CLR   (CSR_BASE+0x05c)
 #define CSR_UCODE_DRV_GP2       (CSR_BASE+0x060)
+
 #define CSR_LED_REG             (CSR_BASE+0x094)
 #define CSR_DRAM_INT_TBL_REG	(CSR_BASE+0x0A0)
+
+/* GIO Chicken Bits (PCI Express bus link power management) */
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
 
-#define CSR_INT_PERIODIC_REG	(CSR_BASE+0x005)
 /* Analog phase-lock-loop configuration  */
 #define CSR_ANA_PLL_CFG         (CSR_BASE+0x20c)
+
 /*
- * Indicates hardware rev, to determine CCK backoff for txpower calculation.
+ * CSR Hardware Revision Workaround Register.  Indicates hardware rev;
+ * "step" determines CCK backoff for txpower calculation.  Used for 4965 only.
+ * See also CSR_HW_REV register.
  * Bit fields:
  *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
+ *  1-0:  "Dash" (-) value, as in C-1, etc.
  */
-#define CSR_HW_REV_WA_REG	(CSR_BASE+0x22C)
-#define CSR_DBG_HPET_MEM_REG	(CSR_BASE+0x240)
+#define CSR_HW_REV_WA_REG		(CSR_BASE+0x22C)
+
+#define CSR_DBG_HPET_MEM_REG		(CSR_BASE+0x240)
+#define CSR_DBG_LINK_PWR_MGMT_REG	(CSR_BASE+0x250)
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
@@ -125,14 +167,14 @@
 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A    (0x00000000)
 #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B    (0x00001000)
 
-#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A		(0x00080000)
-#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM		(0x00200000)
-#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY		(0x00400000)
-#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE	(0x02000000)
-#define CSR_HW_IF_CONFIG_REG_PREPARE			(0x08000000)
+#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A	(0x00080000)
+#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM	(0x00200000)
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_READY	(0x00400000) /* PCI_OWN_SEM */
+#define CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE (0x02000000) /* ME_OWN */
+#define CSR_HW_IF_CONFIG_REG_PREPARE		  (0x08000000) /* WAKE_ME */
 
-#define CSR_INT_PERIODIC_DIS			(0x00)
-#define CSR_INT_PERIODIC_ENA			(0xFF)
+#define CSR_INT_PERIODIC_DIS			(0x00) /* disable periodic int*/
+#define CSR_INT_PERIODIC_ENA			(0xFF) /* 255*32 usec ~ 8 msec*/
 
 /* interrupt flags in INTA, set by uCode or hardware (e.g. dma),
  * acknowledged (reset) by host writing "1" to flagged bits. */
@@ -195,8 +237,46 @@
 #define CSR_RESET_REG_FLAG_SW_RESET                  (0x00000080)
 #define CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
 #define CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)
+#define CSR_RESET_LINK_PWR_MGMT_DISABLED             (0x80000000)
 
-/* GP (general purpose) CONTROL */
+/*
+ * GP (general purpose) CONTROL REGISTER
+ * Bit fields:
+ *    27:  HW_RF_KILL_SW
+ *         Indicates state of (platform's) hardware RF-Kill switch
+ * 26-24:  POWER_SAVE_TYPE
+ *         Indicates current power-saving mode:
+ *         000 -- No power saving
+ *         001 -- MAC power-down
+ *         010 -- PHY (radio) power-down
+ *         011 -- Error
+ *   9-6:  SYS_CONFIG
+ *         Indicates current system configuration, reflecting pins on chip
+ *         as forced high/low by device circuit board.
+ *     4:  GOING_TO_SLEEP
+ *         Indicates MAC is entering a power-saving sleep power-down.
+ *         Not a good time to access device-internal resources.
+ *     3:  MAC_ACCESS_REQ
+ *         Host sets this to request and maintain MAC wakeup, to allow host
+ *         access to device-internal resources.  Host must wait for
+ *         MAC_CLOCK_READY (and !GOING_TO_SLEEP) before accessing non-CSR
+ *         device registers.
+ *     2:  INIT_DONE
+ *         Host sets this to put device into fully operational D0 power mode.
+ *         Host resets this after SW_RESET to put device into low power mode.
+ *     0:  MAC_CLOCK_READY
+ *         Indicates MAC (ucode processor, etc.) is powered up and can run.
+ *         Internal resources are accessible.
+ *         NOTE:  This does not indicate that the processor is actually running.
+ *         NOTE:  This does not indicate that 4965 or 3945 has completed
+ *                init or post-power-down restore of internal SRAM memory.
+ *                Use CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP as indication that
+ *                SRAM is restored and uCode is in normal operation mode.
+ *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ *                do not need to save/restore it.
+ *         NOTE:  After device reset, this bit remains "0" until host sets
+ *                INIT_DONE
+ */
 #define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY        (0x00000001)
 #define CSR_GP_CNTRL_REG_FLAG_INIT_DONE              (0x00000004)
 #define CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ         (0x00000008)
@@ -229,18 +309,58 @@
 #define CSR_EEPROM_REG_MSK_DATA		(0xFFFF0000)
 
 /* EEPROM GP */
-#define CSR_EEPROM_GP_VALID_MSK		(0x00000007)
-#define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
+#define CSR_EEPROM_GP_VALID_MSK		(0x00000007) /* signature */
 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
+#define CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP	(0x00000000)
+#define CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP		(0x00000001)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K		(0x00000002)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K		(0x00000004)
+
+/* One-time-programmable memory general purpose reg */
 #define CSR_OTP_GP_REG_DEVICE_SELECT	(0x00010000) /* 0 - EEPROM, 1 - OTP */
 #define CSR_OTP_GP_REG_OTP_ACCESS_MODE	(0x00020000) /* 0 - absolute, 1 - relative */
 #define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK          (0x00100000) /* bit 20 */
 #define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK        (0x00200000) /* bit 21 */
 
+/* GP REG */
+#define CSR_GP_REG_POWER_SAVE_STATUS_MSK            (0x03000000) /* bit 24/25 */
+#define CSR_GP_REG_NO_POWER_SAVE            (0x00000000)
+#define CSR_GP_REG_MAC_POWER_SAVE           (0x01000000)
+#define CSR_GP_REG_PHY_POWER_SAVE           (0x02000000)
+#define CSR_GP_REG_POWER_SAVE_ERROR         (0x03000000)
+
+
 /* CSR GIO */
 #define CSR_GIO_REG_VAL_L0S_ENABLED	(0x00000002)
 
-/* UCODE DRV GP */
+/*
+ * UCODE-DRIVER GP (general purpose) mailbox register 1
+ * Host driver and uCode write and/or read this register to communicate with
+ * each other.
+ * Bit fields:
+ *     4:  UCODE_DISABLE
+ *         Host sets this to request permanent halt of uCode, same as
+ *         sending CARD_STATE command with "halt" bit set.
+ *     3:  CT_KILL_EXIT
+ *         Host sets this to request exit from CT_KILL state, i.e. host thinks
+ *         device temperature is low enough to continue normal operation.
+ *     2:  CMD_BLOCKED
+ *         Host sets this during RF KILL power-down sequence (HW, SW, CT KILL)
+ *         to release uCode to clear all Tx and command queues, enter
+ *         unassociated mode, and power down.
+ *         NOTE:  Some devices also use HBUS_TARG_MBX_C register for this bit.
+ *     1:  SW_BIT_RFKILL
+ *         Host sets this when issuing CARD_STATE command to request
+ *         device sleep.
+ *     0:  MAC_SLEEP
+ *         uCode sets this when preparing a power-saving power-down.
+ *         uCode resets this when power-up is complete and SRAM is sane.
+ *         NOTE:  3945/4965 saves internal SRAM data to host when powering down,
+ *                and must restore this data after powering back up.
+ *                MAC_SLEEP is the best indication that restore is complete.
+ *                Later devices (5xxx/6xxx/1xxx) use non-volatile SRAM, and
+ *                do not need to save/restore it.
+ */
 #define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP             (0x00000001)
 #define CSR_UCODE_SW_BIT_RFKILL                     (0x00000002)
 #define CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED           (0x00000004)
@@ -253,7 +373,7 @@
 #define CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA	    (0x00000002)
 
 
-/* GI Chicken Bits */
+/* GIO Chicken Bits (PCI Express bus link power management) */
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX  (0x00800000)
 #define CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER  (0x20000000)
 
@@ -273,8 +393,23 @@
 #define CSR_DRAM_INT_TBL_ENABLE		(1 << 31)
 #define CSR_DRAM_INIT_TBL_WRAP_CHECK	(1 << 27)
 
-/*=== HBUS (Host-side Bus) ===*/
+/*
+ * HBUS (Host-side Bus)
+ *
+ * HBUS registers are mapped directly into PCI bus space, but are used
+ * to indirectly access device's internal memory or registers that
+ * may be powered-down.
+ *
+ * Use iwl_write_direct32()/iwl_read_direct32() family for these registers;
+ * host must "grab nic access" via CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ
+ * to make sure the MAC (uCode processor, etc.) is powered up for accessing
+ * internal resources.
+ *
+ * Do not use iwl_write32()/iwl_read32() family to access these registers;
+ * these provide only simple PCI bus access, without waking up the MAC.
+ */
 #define HBUS_BASE	(0x400)
+
 /*
  * Registers for accessing device's internal SRAM memory (e.g. SCD SRAM
  * structures, error log, event log, verifying uCode load).
@@ -289,6 +424,10 @@
 #define HBUS_TARG_MEM_WDAT      (HBUS_BASE+0x018)
 #define HBUS_TARG_MEM_RDAT      (HBUS_BASE+0x01c)
 
+/* Mailbox C, used as workaround alternative to CSR_UCODE_DRV_GP1 mailbox */
+#define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)
+#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED         (0x00000004)
+
 /*
  * Registers for accessing device's internal peripheral registers
  * (e.g. SCD, BSM, etc.).  First write to address register,
@@ -303,16 +442,12 @@
 #define HBUS_TARG_PRPH_RDAT     (HBUS_BASE+0x050)
 
 /*
- * Per-Tx-queue write pointer (index, really!) (3945 and 4965).
+ * Per-Tx-queue write pointer (index, really!)
  * Indicates index to next TFD that driver will fill (1 past latest filled).
  * Bit usage:
  *  0-7:  queue write index
  * 11-8:  queue selector
  */
 #define HBUS_TARG_WRPTR         (HBUS_BASE+0x060)
-#define HBUS_TARG_MBX_C         (HBUS_BASE+0x030)
-
-#define HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED         (0x00000004)
-
 
 #endif /* !__iwl_csr_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index cbc6290..d61293a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -84,9 +84,7 @@
 		struct dentry *file_interrupt;
 		struct dentry *file_qos;
 		struct dentry *file_thermal_throttling;
-#ifdef CONFIG_IWLWIFI_LEDS
 		struct dentry *file_led;
-#endif
 		struct dentry *file_disable_ht40;
 		struct dentry *file_sleep_level_override;
 		struct dentry *file_current_sleep_command;
@@ -108,6 +106,9 @@
 		struct dentry *file_sensitivity;
 		struct dentry *file_chain_noise;
 		struct dentry *file_tx_power;
+		struct dentry *file_power_save_status;
+		struct dentry *file_clear_ucode_statistics;
+		struct dentry *file_clear_traffic_statistics;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index a198bcf..21e0f66 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -47,9 +47,9 @@
 		goto err; 						\
 } while (0)
 
-#define DEBUGFS_ADD_FILE(name, parent) do {                             \
+#define DEBUGFS_ADD_FILE(name, parent, mode) do {                       \
 	dbgfs->dbgfs_##parent##_files.file_##name =                     \
-	debugfs_create_file(#name, S_IWUSR | S_IRUSR,                   \
+	debugfs_create_file(#name, mode,                                \
 				dbgfs->dir_##parent, priv,              \
 				&iwl_dbgfs_##name##_ops);               \
 	if (!(dbgfs->dbgfs_##parent##_files.file_##name))               \
@@ -131,21 +131,22 @@
 
 	int cnt;
 	ssize_t ret;
-	const size_t bufsz = 100 + sizeof(char) * 24 * (MANAGEMENT_MAX + CONTROL_MAX);
+	const size_t bufsz = 100 +
+		sizeof(char) * 50 * (MANAGEMENT_MAX + CONTROL_MAX);
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 	pos += scnprintf(buf + pos, bufsz - pos, "Management:\n");
 	for (cnt = 0; cnt < MANAGEMENT_MAX; cnt++) {
 		pos += scnprintf(buf + pos, bufsz - pos,
-				 "\t%s\t\t: %u\n",
+				 "\t%25s\t\t: %u\n",
 				 get_mgmt_string(cnt),
 				 priv->tx_stats.mgmt[cnt]);
 	}
 	pos += scnprintf(buf + pos, bufsz - pos, "Control\n");
 	for (cnt = 0; cnt < CONTROL_MAX; cnt++) {
 		pos += scnprintf(buf + pos, bufsz - pos,
-				 "\t%s\t\t: %u\n",
+				 "\t%25s\t\t: %u\n",
 				 get_ctrl_string(cnt),
 				 priv->tx_stats.ctrl[cnt]);
 	}
@@ -159,7 +160,7 @@
 	return ret;
 }
 
-static ssize_t iwl_dbgfs_tx_statistics_write(struct file *file,
+static ssize_t iwl_dbgfs_clear_traffic_statistics_write(struct file *file,
 					const char __user *user_buf,
 					size_t count, loff_t *ppos)
 {
@@ -174,8 +175,7 @@
 		return -EFAULT;
 	if (sscanf(buf, "%x", &clear_flag) != 1)
 		return -EFAULT;
-	if (clear_flag == 1)
-		iwl_clear_tx_stats(priv);
+	iwl_clear_traffic_stats(priv);
 
 	return count;
 }
@@ -190,7 +190,7 @@
 	int cnt;
 	ssize_t ret;
 	const size_t bufsz = 100 +
-		sizeof(char) * 24 * (MANAGEMENT_MAX + CONTROL_MAX);
+		sizeof(char) * 50 * (MANAGEMENT_MAX + CONTROL_MAX);
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -198,14 +198,14 @@
 	pos += scnprintf(buf + pos, bufsz - pos, "Management:\n");
 	for (cnt = 0; cnt < MANAGEMENT_MAX; cnt++) {
 		pos += scnprintf(buf + pos, bufsz - pos,
-				 "\t%s\t\t: %u\n",
+				 "\t%25s\t\t: %u\n",
 				 get_mgmt_string(cnt),
 				 priv->rx_stats.mgmt[cnt]);
 	}
 	pos += scnprintf(buf + pos, bufsz - pos, "Control:\n");
 	for (cnt = 0; cnt < CONTROL_MAX; cnt++) {
 		pos += scnprintf(buf + pos, bufsz - pos,
-				 "\t%s\t\t: %u\n",
+				 "\t%25s\t\t: %u\n",
 				 get_ctrl_string(cnt),
 				 priv->rx_stats.ctrl[cnt]);
 	}
@@ -220,26 +220,6 @@
 	return ret;
 }
 
-static ssize_t iwl_dbgfs_rx_statistics_write(struct file *file,
-					const char __user *user_buf,
-					size_t count, loff_t *ppos)
-{
-	struct iwl_priv *priv = file->private_data;
-	u32 clear_flag;
-	char buf[8];
-	int buf_size;
-
-	memset(buf, 0, sizeof(buf));
-	buf_size = min(count, sizeof(buf) -  1);
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	if (sscanf(buf, "%x", &clear_flag) != 1)
-		return -EFAULT;
-	if (clear_flag == 1)
-		iwl_clear_rx_stats(priv);
-	return count;
-}
-
 #define BYTE1_MASK 0x000000ff;
 #define BYTE2_MASK 0x0000ffff;
 #define BYTE3_MASK 0x00ffffff;
@@ -248,13 +228,29 @@
 					size_t count, loff_t *ppos)
 {
 	u32 val;
-	char buf[1024];
+	char *buf;
 	ssize_t ret;
 	int i;
 	int pos = 0;
 	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
-	const size_t bufsz = sizeof(buf);
+	size_t bufsz;
 
+	/* default is to dump the entire data segment */
+	if (!priv->dbgfs->sram_offset && !priv->dbgfs->sram_len) {
+		priv->dbgfs->sram_offset = 0x800000;
+		if (priv->ucode_type == UCODE_INIT)
+			priv->dbgfs->sram_len = priv->ucode_init_data.len;
+		else
+			priv->dbgfs->sram_len = priv->ucode_data.len;
+	}
+	bufsz =  30 + priv->dbgfs->sram_len * sizeof(char) * 10;
+	buf = kmalloc(bufsz, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	pos += scnprintf(buf + pos, bufsz - pos, "sram_len: 0x%x\n",
+			priv->dbgfs->sram_len);
+	pos += scnprintf(buf + pos, bufsz - pos, "sram_offset: 0x%x\n",
+			priv->dbgfs->sram_offset);
 	for (i = priv->dbgfs->sram_len; i > 0; i -= 4) {
 		val = iwl_read_targ_mem(priv, priv->dbgfs->sram_offset + \
 					priv->dbgfs->sram_len - i);
@@ -271,11 +267,14 @@
 				break;
 			}
 		}
+		if (!(i % 16))
+			pos += scnprintf(buf + pos, bufsz - pos, "\n");
 		pos += scnprintf(buf + pos, bufsz - pos, "0x%08x ", val);
 	}
 	pos += scnprintf(buf + pos, bufsz - pos, "\n");
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+	kfree(buf);
 	return ret;
 }
 
@@ -335,8 +334,6 @@
 			pos += scnprintf(buf + pos, bufsz - pos,
 					"flags: 0x%x\n",
 					station->sta.station_flags_msk);
-			pos += scnprintf(buf + pos, bufsz - pos,
-					"ps_status: %u\n", station->ps_status);
 			pos += scnprintf(buf + pos, bufsz - pos, "tid data:\n");
 			pos += scnprintf(buf + pos, bufsz - pos,
 					"seq_num\t\ttxq_id");
@@ -383,6 +380,7 @@
 	int pos = 0, ofs = 0, buf_size = 0;
 	const u8 *ptr;
 	char *buf;
+	u16 eeprom_ver;
 	size_t eeprom_len = priv->cfg->eeprom_size;
 	buf_size = 4 * eeprom_len + 256;
 
@@ -403,9 +401,11 @@
 		IWL_ERR(priv, "Can not allocate Buffer\n");
 		return -ENOMEM;
 	}
-	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
+	eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
+	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s, "
+			"version: 0x%x\n",
 			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
-			? "OTP" : "EEPROM");
+			 ? "OTP" : "EEPROM", eeprom_ver);
 	for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) {
 		pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
 		hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
@@ -436,7 +436,7 @@
 	if (sscanf(buf, "%d", &event_log_flag) != 1)
 		return -EFAULT;
 	if (event_log_flag == 1)
-		priv->cfg->ops->lib->dump_nic_event_log(priv);
+		priv->cfg->ops->lib->dump_nic_event_log(priv, true);
 
 	return count;
 }
@@ -532,6 +532,8 @@
 		test_bit(STATUS_INT_ENABLED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
 		test_bit(STATUS_RF_KILL_HW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n",
+		test_bit(STATUS_CT_KILL, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n",
 		test_bit(STATUS_INIT, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
@@ -672,7 +674,6 @@
 	return ret;
 }
 
-#ifdef CONFIG_IWLWIFI_LEDS
 static ssize_t iwl_dbgfs_led_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
@@ -697,7 +698,6 @@
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	return ret;
 }
-#endif
 
 static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file,
 				char __user *user_buf,
@@ -798,15 +798,20 @@
 	 * valid here. However, let's not confuse them and present
 	 * IWL_POWER_INDEX_1 as "1", not "0".
 	 */
-	if (value > 0)
+	if (value == 0)
+		return -EINVAL;
+	else if (value > 0)
 		value -= 1;
 
 	if (value != -1 && (value < 0 || value >= IWL_POWER_NUM))
 		return -EINVAL;
 
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
 	priv->power_data.debug_sleep_level_override = value;
 
-	iwl_power_update_mode(priv, false);
+	iwl_power_update_mode(priv, true);
 
 	return count;
 }
@@ -861,9 +866,7 @@
 DEBUGFS_READ_FILE_OPS(status);
 DEBUGFS_READ_WRITE_FILE_OPS(interrupt);
 DEBUGFS_READ_FILE_OPS(qos);
-#ifdef CONFIG_IWLWIFI_LEDS
 DEBUGFS_READ_FILE_OPS(led);
-#endif
 DEBUGFS_READ_FILE_OPS(thermal_throttling);
 DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40);
 DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override);
@@ -881,10 +884,14 @@
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	char *buf;
 	int bufsz = ((IWL_TRAFFIC_ENTRIES * IWL_TRAFFIC_ENTRY_SIZE * 64) * 2) +
-		(IWL_MAX_NUM_QUEUES * 32 * 8) + 400;
+		(priv->cfg->num_of_queues * 32 * 8) + 400;
 	const u8 *ptr;
 	ssize_t ret;
 
+	if (!priv->txq) {
+		IWL_ERR(priv, "txq not ready\n");
+		return -EAGAIN;
+	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate buffer\n");
@@ -976,8 +983,12 @@
 	int pos = 0;
 	int cnt;
 	int ret;
-	const size_t bufsz = sizeof(char) * 60 * IWL_MAX_NUM_QUEUES;
+	const size_t bufsz = sizeof(char) * 64 * priv->cfg->num_of_queues;
 
+	if (!priv->txq) {
+		IWL_ERR(priv, "txq not ready\n");
+		return -EAGAIN;
+	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -1028,10 +1039,6 @@
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
-#define UCODE_STATISTICS_CLEAR_MSK		(0x1 << 0)
-#define UCODE_STATISTICS_FREQUENCY_MSK		(0x1 << 1)
-#define UCODE_STATISTICS_NARROW_BAND_MSK	(0x1 << 2)
-
 static int iwl_dbgfs_statistics_flag(struct iwl_priv *priv, char *buf,
 				     int bufsz)
 {
@@ -1068,17 +1075,17 @@
 		sizeof(struct statistics_rx_non_phy) * 20 +
 		sizeof(struct statistics_rx_ht_phy) * 20 + 400;
 	ssize_t ret;
-	struct statistics_rx_phy *ofdm;
-	struct statistics_rx_phy *cck;
-	struct statistics_rx_non_phy *general;
-	struct statistics_rx_ht_phy *ht;
+	struct statistics_rx_phy *ofdm, *accum_ofdm;
+	struct statistics_rx_phy *cck, *accum_cck;
+	struct statistics_rx_non_phy *general, *accum_general;
+	struct statistics_rx_ht_phy *ht, *accum_ht;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
 	/* make request to uCode to retrieve statistics information */
 	mutex_lock(&priv->mutex);
-	ret = iwl_send_statistics_request(priv, 0);
+	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
 	mutex_unlock(&priv->mutex);
 
 	if (ret) {
@@ -1100,155 +1107,268 @@
 	cck = &priv->statistics.rx.cck;
 	general = &priv->statistics.rx.general;
 	ht = &priv->statistics.rx.ofdm_ht;
+	accum_ofdm = &priv->accum_statistics.rx.ofdm;
+	accum_cck = &priv->accum_statistics.rx.cck;
+	accum_general = &priv->accum_statistics.rx.general;
+	accum_ht = &priv->accum_statistics.rx.ofdm_ht;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt: %u\n",
-			 le32_to_cpu(ofdm->ina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt: %u\n",
-			 le32_to_cpu(ofdm->fina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
-			 le32_to_cpu(ofdm->plcp_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
-			 le32_to_cpu(ofdm->crc32_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
-			 le32_to_cpu(ofdm->overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
-			 le32_to_cpu(ofdm->early_overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
-			 le32_to_cpu(ofdm->crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "false_alarm_cnt: %u\n",
-			 le32_to_cpu(ofdm->false_alarm_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_sync_err_cnt: %u\n",
-			 le32_to_cpu(ofdm->fina_sync_err_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sfd_timeout: %u\n",
-			 le32_to_cpu(ofdm->sfd_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_timeout: %u\n",
-			 le32_to_cpu(ofdm->fina_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "unresponded_rts: %u\n",
-			 le32_to_cpu(ofdm->unresponded_rts));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"rxe_frame_limit_overrun: %u\n",
-			le32_to_cpu(ofdm->rxe_frame_limit_overrun));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ack_cnt: %u\n",
-			 le32_to_cpu(ofdm->sent_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_cts_cnt: %u\n",
-			 le32_to_cpu(ofdm->sent_cts_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ba_rsp_cnt: %u\n",
-			 le32_to_cpu(ofdm->sent_ba_rsp_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "dsp_self_kill: %u\n",
-			 le32_to_cpu(ofdm->dsp_self_kill));
-	pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
-			 le32_to_cpu(ofdm->mh_format_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "re_acq_main_rssi_sum: %u\n",
-			 le32_to_cpu(ofdm->re_acq_main_rssi_sum));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->ina_cnt), accum_ofdm->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->overrun_err),
+			 accum_ofdm->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->early_overrun_err),
+			 accum_ofdm->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->crc32_good),
+			 accum_ofdm->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "false_alarm_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->false_alarm_cnt),
+			 accum_ofdm->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_sync_err_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->fina_sync_err_cnt),
+			 accum_ofdm->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sfd_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sfd_timeout),
+			 accum_ofdm->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->fina_timeout),
+			 accum_ofdm->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "unresponded_rts:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->unresponded_rts),
+			 accum_ofdm->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"rxe_frame_lmt_ovrun:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->rxe_frame_limit_overrun),
+			 accum_ofdm->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ack_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sent_ack_cnt),
+			 accum_ofdm->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_cts_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sent_cts_cnt),
+			 accum_ofdm->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ba_rsp_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sent_ba_rsp_cnt),
+			 accum_ofdm->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dsp_self_kill:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->dsp_self_kill),
+			 accum_ofdm->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->mh_format_err),
+			 accum_ofdm->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "re_acq_main_rssi_sum:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->re_acq_main_rssi_sum),
+			 accum_ofdm->re_acq_main_rssi_sum);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - CCK:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt: %u\n",
-			 le32_to_cpu(cck->ina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt: %u\n",
-			 le32_to_cpu(cck->fina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
-			 le32_to_cpu(cck->plcp_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
-			 le32_to_cpu(cck->crc32_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
-			 le32_to_cpu(cck->overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
-			 le32_to_cpu(cck->early_overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
-			 le32_to_cpu(cck->crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "false_alarm_cnt: %u\n",
-			 le32_to_cpu(cck->false_alarm_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_sync_err_cnt: %u\n",
-			 le32_to_cpu(cck->fina_sync_err_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sfd_timeout: %u\n",
-			 le32_to_cpu(cck->sfd_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_timeout: %u\n",
-			 le32_to_cpu(cck->fina_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "unresponded_rts: %u\n",
-			 le32_to_cpu(cck->unresponded_rts));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"rxe_frame_limit_overrun: %u\n",
-			le32_to_cpu(cck->rxe_frame_limit_overrun));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ack_cnt: %u\n",
-			 le32_to_cpu(cck->sent_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_cts_cnt: %u\n",
-			 le32_to_cpu(cck->sent_cts_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ba_rsp_cnt: %u\n",
-			 le32_to_cpu(cck->sent_ba_rsp_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "dsp_self_kill: %u\n",
-			 le32_to_cpu(cck->dsp_self_kill));
-	pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
-			 le32_to_cpu(cck->mh_format_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "re_acq_main_rssi_sum: %u\n",
-			 le32_to_cpu(cck->re_acq_main_rssi_sum));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->plcp_err), accum_cck->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->crc32_err), accum_cck->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->overrun_err),
+			 accum_cck->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->early_overrun_err),
+			 accum_cck->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->crc32_good), accum_cck->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "false_alarm_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->false_alarm_cnt),
+			 accum_cck->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_sync_err_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->fina_sync_err_cnt),
+			 accum_cck->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sfd_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sfd_timeout),
+			 accum_cck->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->fina_timeout),
+			 accum_cck->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "unresponded_rts:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->unresponded_rts),
+			 accum_cck->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"rxe_frame_lmt_ovrun:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->rxe_frame_limit_overrun),
+			 accum_cck->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ack_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sent_ack_cnt),
+			 accum_cck->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_cts_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sent_cts_cnt),
+			 accum_cck->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ba_rsp_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sent_ba_rsp_cnt),
+			 accum_cck->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dsp_self_kill:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->dsp_self_kill),
+			 accum_cck->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->mh_format_err),
+			 accum_cck->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "re_acq_main_rssi_sum:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->re_acq_main_rssi_sum),
+			 accum_cck->re_acq_main_rssi_sum);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - GENERAL:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "bogus_cts: %u\n",
-			 le32_to_cpu(general->bogus_cts));
-	pos += scnprintf(buf + pos, bufsz - pos, "bogus_ack: %u\n",
-			 le32_to_cpu(general->bogus_ack));
-	pos += scnprintf(buf + pos, bufsz - pos, "non_bssid_frames: %u\n",
-			 le32_to_cpu(general->non_bssid_frames));
-	pos += scnprintf(buf + pos, bufsz - pos, "filtered_frames: %u\n",
-			 le32_to_cpu(general->filtered_frames));
-	pos += scnprintf(buf + pos, bufsz - pos, "non_channel_beacons: %u\n",
-			 le32_to_cpu(general->non_channel_beacons));
-	pos += scnprintf(buf + pos, bufsz - pos, "channel_beacons: %u\n",
-			 le32_to_cpu(general->channel_beacons));
-	pos += scnprintf(buf + pos, bufsz - pos, "num_missed_bcon: %u\n",
-			 le32_to_cpu(general->num_missed_bcon));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"adc_rx_saturation_time: %u\n",
-			le32_to_cpu(general->adc_rx_saturation_time));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "bogus_cts:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->bogus_cts),
+			 accum_general->bogus_cts);
+	pos += scnprintf(buf + pos, bufsz - pos, "bogus_ack:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->bogus_ack),
+			 accum_general->bogus_ack);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"ina_detection_search_time: %u\n",
-			le32_to_cpu(general->ina_detection_search_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_a: %u\n",
-			 le32_to_cpu(general->beacon_silence_rssi_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_b: %u\n",
-			 le32_to_cpu(general->beacon_silence_rssi_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_c: %u\n",
-			 le32_to_cpu(general->beacon_silence_rssi_c));
+			 "non_bssid_frames:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->non_bssid_frames),
+			 accum_general->non_bssid_frames);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"interference_data_flag: %u\n",
-			le32_to_cpu(general->interference_data_flag));
-	pos += scnprintf(buf + pos, bufsz - pos, "channel_load: %u\n",
-			 le32_to_cpu(general->channel_load));
-	pos += scnprintf(buf + pos, bufsz - pos, "dsp_false_alarms: %u\n",
-			 le32_to_cpu(general->dsp_false_alarms));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_a: %u\n",
-			 le32_to_cpu(general->beacon_rssi_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_b: %u\n",
-			 le32_to_cpu(general->beacon_rssi_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_c: %u\n",
-			 le32_to_cpu(general->beacon_rssi_c));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_a: %u\n",
-			 le32_to_cpu(general->beacon_energy_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_b: %u\n",
-			 le32_to_cpu(general->beacon_energy_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_c: %u\n",
-			 le32_to_cpu(general->beacon_energy_c));
+			 "filtered_frames:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->filtered_frames),
+			 accum_general->filtered_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "non_channel_beacons:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->non_channel_beacons),
+			 accum_general->non_channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "channel_beacons:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->channel_beacons),
+			 accum_general->channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "num_missed_bcon:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->num_missed_bcon),
+			 accum_general->num_missed_bcon);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"adc_rx_saturation_time:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->adc_rx_saturation_time),
+			 accum_general->adc_rx_saturation_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"ina_detect_search_tm:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->ina_detection_search_time),
+			 accum_general->ina_detection_search_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_silence_rssi_a:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_silence_rssi_a),
+			 accum_general->beacon_silence_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_silence_rssi_b:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_silence_rssi_b),
+			 accum_general->beacon_silence_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_silence_rssi_c:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_silence_rssi_c),
+			 accum_general->beacon_silence_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"interference_data_flag:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->interference_data_flag),
+			 accum_general->interference_data_flag);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "channel_load:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->channel_load),
+			 accum_general->channel_load);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dsp_false_alarms:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->dsp_false_alarms),
+			 accum_general->dsp_false_alarms);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_rssi_a:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_rssi_a),
+			 accum_general->beacon_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_rssi_b:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_rssi_b),
+			 accum_general->beacon_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_rssi_c:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_rssi_c),
+			 accum_general->beacon_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_energy_a:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_energy_a),
+			 accum_general->beacon_energy_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_energy_b:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_energy_b),
+			 accum_general->beacon_energy_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_energy_c:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_energy_c),
+			 accum_general->beacon_energy_c);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM_HT:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
-			 le32_to_cpu(ht->plcp_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
-			 le32_to_cpu(ht->overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
-			 le32_to_cpu(ht->early_overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
-			 le32_to_cpu(ht->crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
-			 le32_to_cpu(ht->crc32_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
-			 le32_to_cpu(ht->mh_format_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_crc32_good: %u\n",
-			 le32_to_cpu(ht->agg_crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_mpdu_cnt: %u\n",
-			 le32_to_cpu(ht->agg_mpdu_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt: %u\n",
-			 le32_to_cpu(ht->agg_cnt));
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->plcp_err), accum_ht->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->overrun_err), accum_ht->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->early_overrun_err),
+			 accum_ht->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->crc32_good), accum_ht->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->crc32_err), accum_ht->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->mh_format_err),
+			 accum_ht->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg_crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->agg_crc32_good),
+			 accum_ht->agg_crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg_mpdu_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->agg_mpdu_cnt),
+			 accum_ht->agg_mpdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
@@ -1264,14 +1384,14 @@
 	char *buf;
 	int bufsz = (sizeof(struct statistics_tx) * 24) + 250;
 	ssize_t ret;
-	struct statistics_tx *tx;
+	struct statistics_tx *tx, *accum_tx;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
 	/* make request to uCode to retrieve statistics information */
 	mutex_lock(&priv->mutex);
-	ret = iwl_send_statistics_request(priv, 0);
+	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
 	mutex_unlock(&priv->mutex);
 
 	if (ret) {
@@ -1290,62 +1410,107 @@
 	 * might not reflect the current uCode activity
 	 */
 	tx = &priv->statistics.tx;
+	accum_tx = &priv->accum_statistics.tx;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Tx:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "preamble: %u\n",
-			 le32_to_cpu(tx->preamble_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "rx_detected_cnt: %u\n",
-			 le32_to_cpu(tx->rx_detected_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "bt_prio_defer_cnt: %u\n",
-			 le32_to_cpu(tx->bt_prio_defer_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "bt_prio_kill_cnt: %u\n",
-			 le32_to_cpu(tx->bt_prio_kill_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "few_bytes_cnt: %u\n",
-			 le32_to_cpu(tx->few_bytes_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "cts_timeout: %u\n",
-			 le32_to_cpu(tx->cts_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "ack_timeout: %u\n",
-			 le32_to_cpu(tx->ack_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "expected_ack_cnt: %u\n",
-			 le32_to_cpu(tx->expected_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "actual_ack_cnt: %u\n",
-			 le32_to_cpu(tx->actual_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "dump_msdu_cnt: %u\n",
-			 le32_to_cpu(tx->dump_msdu_cnt));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"burst_abort_next_frame_mismatch_cnt: %u\n",
-			le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "preamble:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->preamble_cnt),
+			 accum_tx->preamble_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"burst_abort_missing_next_frame_cnt: %u\n",
-			le32_to_cpu(tx->burst_abort_missing_next_frame_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "cts_timeout_collision: %u\n",
-			 le32_to_cpu(tx->cts_timeout_collision));
+			 "rx_detected_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->rx_detected_cnt),
+			 accum_tx->rx_detected_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"ack_or_ba_timeout_collision: %u\n",
-			le32_to_cpu(tx->ack_or_ba_timeout_collision));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg ba_timeout: %u\n",
-			 le32_to_cpu(tx->agg.ba_timeout));
+			 "bt_prio_defer_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->bt_prio_defer_cnt),
+			 accum_tx->bt_prio_defer_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg ba_reschedule_frames: %u\n",
-			le32_to_cpu(tx->agg.ba_reschedule_frames));
+			 "bt_prio_kill_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->bt_prio_kill_cnt),
+			 accum_tx->bt_prio_kill_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg scd_query_agg_frame_cnt: %u\n",
-			le32_to_cpu(tx->agg.scd_query_agg_frame_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg scd_query_no_agg: %u\n",
-			 le32_to_cpu(tx->agg.scd_query_no_agg));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg scd_query_agg: %u\n",
-			 le32_to_cpu(tx->agg.scd_query_agg));
+			 "few_bytes_cnt:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->few_bytes_cnt),
+			 accum_tx->few_bytes_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg scd_query_mismatch: %u\n",
-			le32_to_cpu(tx->agg.scd_query_mismatch));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg frame_not_ready: %u\n",
-			 le32_to_cpu(tx->agg.frame_not_ready));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg underrun: %u\n",
-			 le32_to_cpu(tx->agg.underrun));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg bt_prio_kill: %u\n",
-			 le32_to_cpu(tx->agg.bt_prio_kill));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg rx_ba_rsp_cnt: %u\n",
-			 le32_to_cpu(tx->agg.rx_ba_rsp_cnt));
+			 "cts_timeout:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "ack_timeout:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->ack_timeout),
+			 accum_tx->ack_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "expected_ack_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->expected_ack_cnt),
+			 accum_tx->expected_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "actual_ack_cnt:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->actual_ack_cnt),
+			 accum_tx->actual_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dump_msdu_cnt:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->dump_msdu_cnt),
+			 accum_tx->dump_msdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "abort_nxt_frame_mismatch:"
+			 "\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt),
+			 accum_tx->burst_abort_next_frame_mismatch_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "abort_missing_nxt_frame:"
+			 "\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->burst_abort_missing_next_frame_cnt),
+			 accum_tx->burst_abort_missing_next_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "cts_timeout_collision:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->cts_timeout_collision),
+			 accum_tx->cts_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"ack_ba_timeout_collision:\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->ack_or_ba_timeout_collision),
+			 accum_tx->ack_or_ba_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg ba_timeout:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.ba_timeout),
+			 accum_tx->agg.ba_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"agg ba_resched_frames:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.ba_reschedule_frames),
+			 accum_tx->agg.ba_reschedule_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"agg scd_query_agg_frame:\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_agg_frame_cnt),
+			 accum_tx->agg.scd_query_agg_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg scd_query_no_agg:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_no_agg),
+			 accum_tx->agg.scd_query_no_agg);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg scd_query_agg:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_agg),
+			 accum_tx->agg.scd_query_agg);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"agg scd_query_mismatch:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_mismatch),
+			 accum_tx->agg.scd_query_mismatch);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg frame_not_ready:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.frame_not_ready),
+			 accum_tx->agg.frame_not_ready);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg underrun:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.underrun),
+			 accum_tx->agg.underrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg bt_prio_kill:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.bt_prio_kill),
+			 accum_tx->agg.bt_prio_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg rx_ba_rsp_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.rx_ba_rsp_cnt),
+			 accum_tx->agg.rx_ba_rsp_cnt);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
@@ -1361,16 +1526,16 @@
 	char *buf;
 	int bufsz = sizeof(struct statistics_general) * 4 + 250;
 	ssize_t ret;
-	struct statistics_general *general;
-	struct statistics_dbg *dbg;
-	struct statistics_div *div;
+	struct statistics_general *general, *accum_general;
+	struct statistics_dbg *dbg, *accum_dbg;
+	struct statistics_div *div, *accum_div;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
 	/* make request to uCode to retrieve statistics information */
 	mutex_lock(&priv->mutex);
-	ret = iwl_send_statistics_request(priv, 0);
+	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
 	mutex_unlock(&priv->mutex);
 
 	if (ret) {
@@ -1391,34 +1556,53 @@
 	general = &priv->statistics.general;
 	dbg = &priv->statistics.general.dbg;
 	div = &priv->statistics.general.div;
+	accum_general = &priv->accum_statistics.general;
+	accum_dbg = &priv->accum_statistics.general.dbg;
+	accum_div = &priv->accum_statistics.general.div;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_General:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "temperature: %u\n",
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "temperature:\t\t\t%u\n",
 			 le32_to_cpu(general->temperature));
-	pos += scnprintf(buf + pos, bufsz - pos, "temperature_m: %u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, "temperature_m:\t\t\t%u\n",
 			 le32_to_cpu(general->temperature_m));
-	pos += scnprintf(buf + pos, bufsz - pos, "burst_check: %u\n",
-			 le32_to_cpu(dbg->burst_check));
-	pos += scnprintf(buf + pos, bufsz - pos, "burst_count: %u\n",
-			 le32_to_cpu(dbg->burst_count));
-	pos += scnprintf(buf + pos, bufsz - pos, "sleep_time: %u\n",
-			 le32_to_cpu(general->sleep_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "slots_out: %u\n",
-			 le32_to_cpu(general->slots_out));
-	pos += scnprintf(buf + pos, bufsz - pos, "slots_idle: %u\n",
-			 le32_to_cpu(general->slots_idle));
-	pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp: %u\n",
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "burst_check:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(dbg->burst_check),
+			 accum_dbg->burst_check);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "burst_count:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(dbg->burst_count),
+			 accum_dbg->burst_count);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sleep_time:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->sleep_time),
+			 accum_general->sleep_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "slots_out:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->slots_out),
+			 accum_general->slots_out);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "slots_idle:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->slots_idle),
+			 accum_general->slots_idle);
+	pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n",
 			 le32_to_cpu(general->ttl_timestamp));
-	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_a: %u\n",
-			 le32_to_cpu(div->tx_on_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_b: %u\n",
-			 le32_to_cpu(div->tx_on_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "exec_time: %u\n",
-			 le32_to_cpu(div->exec_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "probe_time: %u\n",
-			 le32_to_cpu(div->probe_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "rx_enable_counter: %u\n",
-			 le32_to_cpu(general->rx_enable_counter));
+	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_a:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->tx_on_a), accum_div->tx_on_a);
+	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_b:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->tx_on_b), accum_div->tx_on_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "exec_time:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->exec_time), accum_div->exec_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "probe_time:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->probe_time), accum_div->probe_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "rx_enable_counter:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->rx_enable_counter),
+			 accum_general->rx_enable_counter);
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
 	return ret;
@@ -1579,7 +1763,7 @@
 	else {
 		/* make request to uCode to retrieve statistics information */
 		mutex_lock(&priv->mutex);
-		ret = iwl_send_statistics_request(priv, 0);
+		ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
 		mutex_unlock(&priv->mutex);
 
 		if (ret) {
@@ -1614,8 +1798,55 @@
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
-DEBUGFS_READ_WRITE_FILE_OPS(rx_statistics);
-DEBUGFS_READ_WRITE_FILE_OPS(tx_statistics);
+static ssize_t iwl_dbgfs_power_save_status_read(struct file *file,
+						    char __user *user_buf,
+						    size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	char buf[60];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+	u32 pwrsave_status;
+
+	pwrsave_status = iwl_read32(priv, CSR_GP_CNTRL) &
+			CSR_GP_REG_POWER_SAVE_STATUS_MSK;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Power Save Status: ");
+	pos += scnprintf(buf + pos, bufsz - pos, "%s\n",
+		(pwrsave_status == CSR_GP_REG_NO_POWER_SAVE) ? "none" :
+		(pwrsave_status == CSR_GP_REG_MAC_POWER_SAVE) ? "MAC" :
+		(pwrsave_status == CSR_GP_REG_PHY_POWER_SAVE) ? "PHY" :
+		"error");
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_clear_ucode_statistics_write(struct file *file,
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = file->private_data;
+	char buf[8];
+	int buf_size;
+	int clear;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) -  1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	if (sscanf(buf, "%d", &clear) != 1)
+		return -EFAULT;
+
+	/* make request to uCode to retrieve statistics information */
+	mutex_lock(&priv->mutex);
+	iwl_send_statistics_request(priv, CMD_SYNC, true);
+	mutex_unlock(&priv->mutex);
+
+	return count;
+}
+
+DEBUGFS_READ_FILE_OPS(rx_statistics);
+DEBUGFS_READ_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
 DEBUGFS_READ_FILE_OPS(rx_queue);
 DEBUGFS_READ_FILE_OPS(tx_queue);
@@ -1625,6 +1856,9 @@
 DEBUGFS_READ_FILE_OPS(sensitivity);
 DEBUGFS_READ_FILE_OPS(chain_noise);
 DEBUGFS_READ_FILE_OPS(tx_power);
+DEBUGFS_READ_FILE_OPS(power_save_status);
+DEBUGFS_WRITE_FILE_OPS(clear_ucode_statistics);
+DEBUGFS_WRITE_FILE_OPS(clear_traffic_statistics);
 
 /*
  * Create the debugfs files and directories
@@ -1653,33 +1887,34 @@
 	DEBUGFS_ADD_DIR(data, dbgfs->dir_drv);
 	DEBUGFS_ADD_DIR(rf, dbgfs->dir_drv);
 	DEBUGFS_ADD_DIR(debug, dbgfs->dir_drv);
-	DEBUGFS_ADD_FILE(nvm, data);
-	DEBUGFS_ADD_FILE(sram, data);
-	DEBUGFS_ADD_FILE(log_event, data);
-	DEBUGFS_ADD_FILE(stations, data);
-	DEBUGFS_ADD_FILE(channels, data);
-	DEBUGFS_ADD_FILE(status, data);
-	DEBUGFS_ADD_FILE(interrupt, data);
-	DEBUGFS_ADD_FILE(qos, data);
-#ifdef CONFIG_IWLWIFI_LEDS
-	DEBUGFS_ADD_FILE(led, data);
-#endif
-	DEBUGFS_ADD_FILE(sleep_level_override, data);
-	DEBUGFS_ADD_FILE(current_sleep_command, data);
-	DEBUGFS_ADD_FILE(thermal_throttling, data);
-	DEBUGFS_ADD_FILE(disable_ht40, data);
-	DEBUGFS_ADD_FILE(rx_statistics, debug);
-	DEBUGFS_ADD_FILE(tx_statistics, debug);
-	DEBUGFS_ADD_FILE(traffic_log, debug);
-	DEBUGFS_ADD_FILE(rx_queue, debug);
-	DEBUGFS_ADD_FILE(tx_queue, debug);
-	DEBUGFS_ADD_FILE(tx_power, debug);
+	DEBUGFS_ADD_FILE(nvm, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(sram, data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(log_event, data, S_IWUSR);
+	DEBUGFS_ADD_FILE(stations, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(channels, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(status, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(interrupt, data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(qos, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(led, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(sleep_level_override, data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(current_sleep_command, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(thermal_throttling, data, S_IRUSR);
+	DEBUGFS_ADD_FILE(disable_ht40, data, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(rx_statistics, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(tx_statistics, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(traffic_log, debug, S_IWUSR | S_IRUSR);
+	DEBUGFS_ADD_FILE(rx_queue, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(tx_queue, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(tx_power, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(power_save_status, debug, S_IRUSR);
+	DEBUGFS_ADD_FILE(clear_ucode_statistics, debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(clear_traffic_statistics, debug, S_IWUSR);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
-		DEBUGFS_ADD_FILE(ucode_rx_stats, debug);
-		DEBUGFS_ADD_FILE(ucode_tx_stats, debug);
-		DEBUGFS_ADD_FILE(ucode_general_stats, debug);
-		DEBUGFS_ADD_FILE(sensitivity, debug);
-		DEBUGFS_ADD_FILE(chain_noise, debug);
+		DEBUGFS_ADD_FILE(ucode_rx_stats, debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_tx_stats, debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(ucode_general_stats, debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(sensitivity, debug, S_IRUSR);
+		DEBUGFS_ADD_FILE(chain_noise, debug, S_IRUSR);
 	}
 	DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal);
 	DEBUGFS_ADD_BOOL(disable_chain_noise, rf,
@@ -1716,9 +1951,7 @@
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_interrupt);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_qos);
-#ifdef CONFIG_IWLWIFI_LEDS
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_led);
-#endif
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_thermal_throttling);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_disable_ht40);
 	DEBUGFS_REMOVE(priv->dbgfs->dir_data);
@@ -1728,6 +1961,11 @@
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_rx_queue);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_queue);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_power);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_power_save_status);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+			file_clear_ucode_statistics);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
+			file_clear_traffic_statistics);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 028d505..2673e9a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -43,7 +43,6 @@
 #include "iwl-debug.h"
 #include "iwl-4965-hw.h"
 #include "iwl-3945-hw.h"
-#include "iwl-3945-led.h"
 #include "iwl-led.h"
 #include "iwl-power.h"
 #include "iwl-agn-rs.h"
@@ -53,21 +52,23 @@
 extern struct iwl_cfg iwl5300_agn_cfg;
 extern struct iwl_cfg iwl5100_agn_cfg;
 extern struct iwl_cfg iwl5350_agn_cfg;
-extern struct iwl_cfg iwl5100_bg_cfg;
+extern struct iwl_cfg iwl5100_bgn_cfg;
 extern struct iwl_cfg iwl5100_abg_cfg;
 extern struct iwl_cfg iwl5150_agn_cfg;
-extern struct iwl_cfg iwl6000h_2agn_cfg;
+extern struct iwl_cfg iwl5150_abg_cfg;
 extern struct iwl_cfg iwl6000i_2agn_cfg;
+extern struct iwl_cfg iwl6000i_2abg_cfg;
+extern struct iwl_cfg iwl6000i_2bg_cfg;
 extern struct iwl_cfg iwl6000_3agn_cfg;
 extern struct iwl_cfg iwl6050_2agn_cfg;
-extern struct iwl_cfg iwl6050_3agn_cfg;
+extern struct iwl_cfg iwl6050_2abg_cfg;
 extern struct iwl_cfg iwl1000_bgn_cfg;
+extern struct iwl_cfg iwl1000_bg_cfg;
 
 struct iwl_tx_queue;
 
 /* shared structures from iwl-5000.c */
 extern struct iwl_mod_params iwl50_mod_params;
-extern struct iwl_ops iwl5000_ops;
 extern struct iwl_ucode_ops iwl5000_ucode;
 extern struct iwl_lib_ops iwl5000_lib;
 extern struct iwl_hcmd_ops iwl5000_hcmd;
@@ -81,9 +82,6 @@
 				    __le32 *tx_flags);
 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
 			     struct iwl_rx_phy_res *rx_resp);
-extern int iwl5000_apm_init(struct iwl_priv *priv);
-extern void iwl5000_apm_stop(struct iwl_priv *priv);
-extern int iwl5000_apm_reset(struct iwl_priv *priv);
 extern void iwl5000_nic_config(struct iwl_priv *priv);
 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
@@ -144,12 +142,13 @@
 #define	DEFAULT_LONG_RETRY_LIMIT  4U
 
 struct iwl_rx_mem_buffer {
-	dma_addr_t real_dma_addr;
-	dma_addr_t aligned_dma_addr;
-	struct sk_buff *skb;
+	dma_addr_t page_dma;
+	struct page *page;
 	struct list_head list;
 };
 
+#define rxb_addr(r) page_address(r->page)
+
 /* defined below */
 struct iwl_device_cmd;
 
@@ -165,7 +164,7 @@
 	 */
 	void (*callback)(struct iwl_priv *priv,
 			 struct iwl_device_cmd *cmd,
-			 struct sk_buff *skb);
+			 struct iwl_rx_packet *pkt);
 
 	/* The CMD_SIZE_HUGE flag bit indicates that the command
 	 * structure is stored at the end of the shared queue memory. */
@@ -293,9 +292,6 @@
 
 	/* HT40 channel info */
 	s8 ht40_max_power_avg;	/* (dBm) regul. eeprom, normal Tx, any rate */
-	s8 ht40_curr_txpow;	/* (dBm) regulatory/spectrum/user (not h/w) */
-	s8 ht40_min_power;	/* always 0 */
-	s8 ht40_scan_power;	/* (dBm) eeprom, direct scans, any rate */
 	u8 ht40_flags;		/* flags copied from EEPROM */
 	u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
 
@@ -321,6 +317,13 @@
  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
 #define IWL_MIN_NUM_QUEUES	10
 
+/*
+ * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00,
+ * the driver maps it into the appropriate device FIFO for the
+ * uCode.
+ */
+#define IWL_CMD_QUEUE_NUM	4
+
 /* Power management (not Tx power) structures */
 
 enum iwl_pwr_src {
@@ -356,7 +359,14 @@
 	CMD_WANT_SKB = (1 << 2),
 };
 
-#define IWL_CMD_MAX_PAYLOAD 320
+#define DEF_CMD_PAYLOAD_SIZE 320
+
+/*
+ * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
+ * SNAP header and alignment. It should also be big enough for 802.11
+ * control frames.
+ */
+#define IWL_LINK_HDR_MAX 64
 
 /**
  * struct iwl_device_cmd
@@ -373,7 +383,8 @@
 		u16 val16;
 		u32 val32;
 		struct iwl_tx_cmd tx;
-		u8 payload[IWL_CMD_MAX_PAYLOAD];
+		struct iwl6000_channel_switch_cmd chswitch;
+		u8 payload[DEF_CMD_PAYLOAD_SIZE];
 	} __attribute__ ((packed)) cmd;
 } __attribute__ ((packed));
 
@@ -382,21 +393,15 @@
 
 struct iwl_host_cmd {
 	const void *data;
-	struct sk_buff *reply_skb;
+	unsigned long reply_page;
 	void (*callback)(struct iwl_priv *priv,
 			 struct iwl_device_cmd *cmd,
-			 struct sk_buff *skb);
+			 struct iwl_rx_packet *pkt);
 	u32 flags;
 	u16 len;
 	u8 id;
 };
 
-/*
- * RX related structures and functions
- */
-#define RX_FREE_BUFFERS 64
-#define RX_LOW_WATERMARK 8
-
 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
@@ -502,12 +507,11 @@
 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
 
-struct iwl_ht_info {
+struct iwl_ht_config {
 	/* self configuration data */
-	u8 is_ht;
-	u8 supported_chan_width;
-	u8 sm_ps;
-	struct ieee80211_mcs_info mcs;
+	bool is_ht;
+	bool is_40mhz;
+	bool single_chain_sufficient;
 	/* BSS related data */
 	u8 extension_chan_offset;
 	u8 ht_protection;
@@ -541,26 +545,27 @@
 	struct iwl_qosparam_cmd def_qos_parm;
 };
 
-#define STA_PS_STATUS_WAKE             0
-#define STA_PS_STATUS_SLEEP            1
-
-
-struct iwl3945_station_entry {
-	struct iwl3945_addsta_cmd sta;
-	struct iwl_tid_data tid[MAX_TID_COUNT];
-	u8 used;
-	u8 ps_status;
-	struct iwl_hw_key keyinfo;
-};
-
 struct iwl_station_entry {
 	struct iwl_addsta_cmd sta;
 	struct iwl_tid_data tid[MAX_TID_COUNT];
 	u8 used;
-	u8 ps_status;
 	struct iwl_hw_key keyinfo;
 };
 
+/*
+ * iwl_station_priv: Driver's private station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ */
+struct iwl_station_priv {
+	struct iwl_lq_sta lq_sta;
+	atomic_t pending_frames;
+	bool client;
+	bool asleep;
+};
+
 /* one for each uCode image (inst/data, boot/init/runtime) */
 struct fw_desc {
 	void *v_addr;		/* access by driver */
@@ -622,6 +627,10 @@
 	u16 auto_corr_max_cck_mrc;
 	u16 auto_corr_min_cck;
 	u16 auto_corr_min_cck_mrc;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
 };
 
 
@@ -639,7 +648,7 @@
  * @valid_tx/rx_ant: usable antennas
  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
  * @max_rxq_log: Log-base-2 of max_rxq_size
- * @rx_buf_size: Rx buffer size
+ * @rx_page_order: Rx buffer page order
  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
  * @max_stations:
  * @bcast_sta_id:
@@ -662,9 +671,8 @@
 	u8  valid_rx_ant;
 	u16 max_rxq_size;
 	u16 max_rxq_log;
-	u32 rx_buf_size;
+	u32 rx_page_order;
 	u32 rx_wrt_ptr_reg;
-	u32 max_pkt_size;
 	u8  max_stations;
 	u8  bcast_sta_id;
 	u8  ht40_channel;
@@ -711,7 +719,11 @@
 
 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
 {
-	/* This is for scan command, the big buffer at end of command array */
+	/*
+	 * This is for init calibration result and scan command which
+	 * required buffer > TFD_MAX_PAYLOAD_SIZE,
+	 * the big buffer at end of command array
+	 */
 	if (is_huge)
 		return q->n_window;	/* must be power of 2 */
 
@@ -726,9 +738,6 @@
 	size_t size;
 };
 
-#define IWL_CHANNEL_WIDTH_20MHZ   0
-#define IWL_CHANNEL_WIDTH_40MHZ   1
-
 #define IWL_OPERATION_MODE_AUTO     0
 #define IWL_OPERATION_MODE_HT_ONLY  1
 #define IWL_OPERATION_MODE_MIXED    2
@@ -741,7 +750,8 @@
 
 /* Sensitivity and chain noise calibration */
 #define INITIALIZATION_VALUE		0xFFFF
-#define CAL_NUM_OF_BEACONS		20
+#define IWL4965_CAL_NUM_BEACONS		20
+#define IWL_CAL_NUM_BEACONS		16
 #define MAXIMUM_ALLOWED_PATHLOSS	15
 
 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
@@ -845,6 +855,10 @@
 	s32 nrg_auto_corr_silence_diff;
 	u32 num_in_cck_no_fa;
 	u32 nrg_th_ofdm;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
 };
 
 /* Chain noise (differential Rx gain) calib data */
@@ -894,13 +908,11 @@
 /**
  * enum iwl_pa_type - Power Amplifier type
  * @IWL_PA_SYSTEM:  based on uCode configuration
- * @IWL_PA_HYBRID: use both Internal and external PA
  * @IWL_PA_INTERNAL: use Internal only
  */
 enum iwl_pa_type {
 	IWL_PA_SYSTEM = 0,
-	IWL_PA_HYBRID = 1,
-	IWL_PA_INTERNAL = 2,
+	IWL_PA_INTERNAL = 1,
 };
 
 /* interrupt statistics */
@@ -961,7 +973,16 @@
 };
 #endif
 
-#define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
+/*
+ * iwl_switch_rxon: "channel switch" structure
+ *
+ * @ switch_in_progress: channel switch in progress
+ * @ channel: new channel
+ */
+struct iwl_switch_rxon {
+	bool switch_in_progress;
+	__le16 channel;
+};
 
 struct iwl_priv {
 
@@ -976,7 +997,7 @@
 	int frames_count;
 
 	enum ieee80211_band band;
-	int alloc_rxb_skb;
+	int alloc_rxb_page;
 
 	void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb);
@@ -1056,21 +1077,18 @@
 	const struct iwl_rxon_cmd active_rxon;
 	struct iwl_rxon_cmd staging_rxon;
 
-	struct iwl_rxon_cmd recovery_rxon;
+	struct iwl_switch_rxon switch_rxon;
 
 	/* 1st responses from initialize and runtime uCode images.
 	 * 4965's initialize alive response contains some calibration data. */
 	struct iwl_init_alive_resp card_alive_init;
 	struct iwl_alive_resp card_alive;
 
-#ifdef CONFIG_IWLWIFI_LEDS
 	unsigned long last_blink_time;
 	u8 last_blink_rate;
 	u8 allow_blinking;
 	u64 led_tpt;
-	struct iwl_led led[IWL_LED_TRG_MAX];
-	unsigned int rxtxpackets;
-#endif
+
 	u16 active_rate;
 	u16 active_rate_basic;
 
@@ -1080,11 +1098,10 @@
 	struct iwl_chain_noise_data chain_noise_data;
 	__le16 sensitivity_tbl[HD_TABLE_SIZE];
 
-	struct iwl_ht_info current_ht_config;
+	struct iwl_ht_config current_ht_config;
 	u8 last_phy_res[100];
 
 	/* Rate scaling data */
-	s8 data_retry_limit;
 	u8 retry_rate;
 
 	wait_queue_head_t wait_command_queue;
@@ -1093,7 +1110,7 @@
 
 	/* Rx and Tx DMA processing queues */
 	struct iwl_rx_queue rxq;
-	struct iwl_tx_queue txq[IWL_MAX_NUM_QUEUES];
+	struct iwl_tx_queue *txq;
 	unsigned long txq_ctx_active_msk;
 	struct iwl_dma_ptr  kw;	/* keep warm address */
 	struct iwl_dma_ptr  scd_bc_tbls;
@@ -1116,7 +1133,9 @@
 	struct iwl_tt_mgmt thermal_throttle;
 
 	struct iwl_notif_statistics statistics;
-	unsigned long last_statistics_time;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_notif_statistics accum_statistics;
+#endif
 
 	/* context information */
 	u16 rates_mask;
@@ -1216,6 +1235,7 @@
 	/* TX Power */
 	s8 tx_power_user_lmt;
 	s8 tx_power_device_lmt;
+	s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
 
 
 #ifdef CONFIG_IWLWIFI_DEBUG
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
new file mode 100644
index 0000000..e7d88d1
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
@@ -0,0 +1,14 @@
+#include <linux/module.h>
+
+/* sparse doesn't like tracepoint macros */
+#ifndef __CHECKER__
+#define CREATE_TRACE_POINTS
+#include "iwl-devtrace.h"
+
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_iowrite8);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ioread32);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_iowrite32);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_rx);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_event);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_error);
+#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
new file mode 100644
index 0000000..2136196
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -0,0 +1,197 @@
+#if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __IWLWIFI_DEVICE_TRACE
+
+#include <linux/tracepoint.h>
+#include "iwl-dev.h"
+
+#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING) || defined(__CHECKER__)
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, ...) \
+static inline void trace_ ## name(proto) {}
+#endif
+
+#define PRIV_ENTRY	__field(struct iwl_priv *, priv)
+#define PRIV_ASSIGN	__entry->priv = priv
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM iwlwifi_io
+
+TRACE_EVENT(iwlwifi_dev_ioread32,
+	TP_PROTO(struct iwl_priv *priv, u32 offs, u32 val),
+	TP_ARGS(priv, offs, val),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, offs)
+		__field(u32, val)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->offs = offs;
+		__entry->val = val;
+	),
+	TP_printk("[%p] read io[%#x] = %#x", __entry->priv, __entry->offs, __entry->val)
+);
+
+TRACE_EVENT(iwlwifi_dev_iowrite8,
+	TP_PROTO(struct iwl_priv *priv, u32 offs, u8 val),
+	TP_ARGS(priv, offs, val),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, offs)
+		__field(u8, val)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->offs = offs;
+		__entry->val = val;
+	),
+	TP_printk("[%p] write io[%#x] = %#x)", __entry->priv, __entry->offs, __entry->val)
+);
+
+TRACE_EVENT(iwlwifi_dev_iowrite32,
+	TP_PROTO(struct iwl_priv *priv, u32 offs, u32 val),
+	TP_ARGS(priv, offs, val),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, offs)
+		__field(u32, val)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->offs = offs;
+		__entry->val = val;
+	),
+	TP_printk("[%p] write io[%#x] = %#x)", __entry->priv, __entry->offs, __entry->val)
+);
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM iwlwifi
+
+TRACE_EVENT(iwlwifi_dev_hcmd,
+	TP_PROTO(struct iwl_priv *priv, void *hcmd, size_t len, u32 flags),
+	TP_ARGS(priv, hcmd, len, flags),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__dynamic_array(u8, hcmd, len)
+		__field(u32, flags)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		memcpy(__get_dynamic_array(hcmd), hcmd, len);
+		__entry->flags = flags;
+	),
+	TP_printk("[%p] hcmd %#.2x (%ssync)",
+		  __entry->priv, ((u8 *)__get_dynamic_array(hcmd))[0],
+		  __entry->flags & CMD_ASYNC ? "a" : "")
+);
+
+TRACE_EVENT(iwlwifi_dev_rx,
+	TP_PROTO(struct iwl_priv *priv, void *rxbuf, size_t len),
+	TP_ARGS(priv, rxbuf, len),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__dynamic_array(u8, rxbuf, len)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		memcpy(__get_dynamic_array(rxbuf), rxbuf, len);
+	),
+	TP_printk("[%p] RX cmd %#.2x",
+		  __entry->priv, ((u8 *)__get_dynamic_array(rxbuf))[4])
+);
+
+TRACE_EVENT(iwlwifi_dev_tx,
+	TP_PROTO(struct iwl_priv *priv, void *tfd, size_t tfdlen,
+		 void *buf0, size_t buf0_len,
+		 void *buf1, size_t buf1_len),
+	TP_ARGS(priv, tfd, tfdlen, buf0, buf0_len, buf1, buf1_len),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+
+		__field(size_t, framelen)
+		__dynamic_array(u8, tfd, tfdlen)
+
+		/*
+		 * Do not insert between or below these items,
+		 * we want to keep the frame together (except
+		 * for the possible padding).
+		 */
+		__dynamic_array(u8, buf0, buf0_len)
+		__dynamic_array(u8, buf1, buf1_len)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->framelen = buf0_len + buf1_len;
+		memcpy(__get_dynamic_array(tfd), tfd, tfdlen);
+		memcpy(__get_dynamic_array(buf0), buf0, buf0_len);
+		memcpy(__get_dynamic_array(buf1), buf1, buf0_len);
+	),
+	TP_printk("[%p] TX %.2x (%zu bytes)",
+		  __entry->priv,
+		  ((u8 *)__get_dynamic_array(buf0))[0],
+		  __entry->framelen)
+);
+
+TRACE_EVENT(iwlwifi_dev_ucode_error,
+	TP_PROTO(struct iwl_priv *priv, u32 desc, u32 time,
+		 u32 data1, u32 data2, u32 line, u32 blink1,
+		 u32 blink2, u32 ilink1, u32 ilink2),
+	TP_ARGS(priv, desc, time, data1, data2, line,
+		blink1, blink2, ilink1, ilink2),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, desc)
+		__field(u32, time)
+		__field(u32, data1)
+		__field(u32, data2)
+		__field(u32, line)
+		__field(u32, blink1)
+		__field(u32, blink2)
+		__field(u32, ilink1)
+		__field(u32, ilink2)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->desc = desc;
+		__entry->time = time;
+		__entry->data1 = data1;
+		__entry->data2 = data2;
+		__entry->line = line;
+		__entry->blink1 = blink1;
+		__entry->blink2 = blink2;
+		__entry->ilink1 = ilink1;
+		__entry->ilink2 = ilink2;
+	),
+	TP_printk("[%p] #%02d %010u data 0x%08X 0x%08X line %u, "
+		  "blink 0x%05X 0x%05X ilink 0x%05X 0x%05X",
+		  __entry->priv, __entry->desc, __entry->time, __entry->data1,
+		  __entry->data2, __entry->line, __entry->blink1,
+		  __entry->blink2, __entry->ilink1, __entry->ilink2)
+);
+
+TRACE_EVENT(iwlwifi_dev_ucode_event,
+	TP_PROTO(struct iwl_priv *priv, u32 time, u32 data, u32 ev),
+	TP_ARGS(priv, time, data, ev),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+
+		__field(u32, time)
+		__field(u32, data)
+		__field(u32, ev)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->time = time;
+		__entry->data = data;
+		__entry->ev = ev;
+	),
+	TP_printk("[%p] EVT_LOGT:%010u:0x%08x:%04u",
+		  __entry->priv, __entry->time, __entry->data, __entry->ev)
+);
+#endif /* __IWLWIFI_DEVICE_TRACE */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE iwl-devtrace
+#include <trace/define_trace.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index e14c995..3946e5c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -215,12 +215,35 @@
 
 int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 {
-	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
-	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
-		return -ENOENT;
+	u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
+	int ret = 0;
+
+	IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp);
+	switch (gp) {
+	case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
+		if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
+			IWL_ERR(priv, "EEPROM with bad signature: 0x%08x\n",
+				gp);
+			ret = -ENOENT;
+		}
+		break;
+	case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
+	case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
+		if (priv->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) {
+			IWL_ERR(priv, "OTP with bad signature: 0x%08x\n", gp);
+			ret = -ENOENT;
+		}
+		break;
+	case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
+	default:
+		IWL_ERR(priv, "bad EEPROM/OTP signature, type=%s, "
+			"EEPROM_GP=0x%08x\n",
+			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+			? "OTP" : "EEPROM", gp);
+		ret = -ENOENT;
+		break;
 	}
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
 
@@ -283,7 +306,8 @@
 			    CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
 
 		/* See if we got it */
-		ret = iwl_poll_direct_bit(priv, CSR_HW_IF_CONFIG_REG,
+		ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+				CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 				CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 				EEPROM_SEM_TIMEOUT);
 		if (ret >= 0) {
@@ -322,7 +346,8 @@
 		     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 
 	/* wait for clock to be ready */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
+	ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+				  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 				  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 				  25000);
 	if (ret < 0)
@@ -333,6 +358,14 @@
 		udelay(5);
 		iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
 				    APMG_PS_CTRL_VAL_RESET_REQ);
+
+		/*
+		 * CSR auto clock gate disable bit -
+		 * this is only applicable for HW with OTP shadow RAM
+		 */
+		if (priv->cfg->shadow_ram_support)
+			iwl_set_bit(priv, CSR_DBG_LINK_PWR_MGMT_REG,
+				CSR_RESET_LINK_PWR_MGMT_DISABLED);
 	}
 	return ret;
 }
@@ -345,7 +378,8 @@
 
 	_iwl_write32(priv, CSR_EEPROM_REG,
 		     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-	ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+	ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
+				  CSR_EEPROM_REG_READ_VALID_MSK,
 				  CSR_EEPROM_REG_READ_VALID_MSK,
 				  IWL_EEPROM_ACCESS_TIMEOUT);
 	if (ret < 0) {
@@ -484,6 +518,11 @@
 	}
 	e = (u16 *)priv->eeprom;
 
+	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
+		/* OTP reads require powered-up chip */
+		priv->cfg->ops->lib->apm_ops.init(priv);
+	}
+
 	ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
 	if (ret < 0) {
 		IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
@@ -498,7 +537,9 @@
 		ret = -ENOENT;
 		goto err;
 	}
+
 	if (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP) {
+
 		ret = iwl_init_otp_access(priv);
 		if (ret) {
 			IWL_ERR(priv, "Failed to initialize OTP access.\n");
@@ -529,6 +570,13 @@
 			e[cache_addr / 2] = eeprom_data;
 			cache_addr += sizeof(u16);
 		}
+
+		/*
+		 * Now that OTP reads are complete, reset chip to save
+		 *   power until we load uCode during "up".
+		 */
+		priv->cfg->ops->lib->apm_ops.stop(priv);
+
 	} else {
 		/* eeprom is an array of 16bit values */
 		for (addr = 0; addr < sz; addr += sizeof(u16)) {
@@ -537,7 +585,8 @@
 			_iwl_write32(priv, CSR_EEPROM_REG,
 				     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
 
-			ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+			ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
+						  CSR_EEPROM_REG_READ_VALID_MSK,
 						  CSR_EEPROM_REG_READ_VALID_MSK,
 						  IWL_EEPROM_ACCESS_TIMEOUT);
 			if (ret < 0) {
@@ -705,9 +754,6 @@
 
 	ch_info->ht40_eeprom = *eeprom_ch;
 	ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
-	ch_info->ht40_curr_txpow = eeprom_ch->max_power_avg;
-	ch_info->ht40_min_power = 0;
-	ch_info->ht40_scan_power = eeprom_ch->max_power_avg;
 	ch_info->ht40_flags = eeprom_ch->flags;
 	ch_info->ht40_extension_channel &= ~clear_ht40_extension_channel;
 
@@ -719,7 +765,8 @@
  *     find the highest tx power from all chains for the channel
  */
 static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
-		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, int element)
+		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
+		int element, s8 *max_txpower_in_half_dbm)
 {
 	s8 max_txpower_avg = 0; /* (dBm) */
 
@@ -751,10 +798,14 @@
 	    (enhanced_txpower[element].mimo3_max > max_txpower_avg))
 		max_txpower_avg = enhanced_txpower[element].mimo3_max;
 
-	/* max. tx power in EEPROM is in 1/2 dBm format
-	 * convert from 1/2 dBm to dBm
+	/*
+	 * max. tx power in EEPROM is in 1/2 dBm format
+	 * convert from 1/2 dBm to dBm (round-up convert)
+	 * but we also do not want to loss 1/2 dBm resolution which
+	 * will impact performance
 	 */
-	return max_txpower_avg >> 1;
+	*max_txpower_in_half_dbm = max_txpower_avg;
+	return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
 }
 
 /**
@@ -763,7 +814,7 @@
  */
 static s8 iwl_update_common_txpower(struct iwl_priv *priv,
 		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
-		int section, int element)
+		int section, int element, s8 *max_txpower_in_half_dbm)
 {
 	struct iwl_channel_info *ch_info;
 	int ch;
@@ -777,25 +828,25 @@
 	if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
 		is_ht40 = true;
 	max_txpower_avg =
-		iwl_get_max_txpower_avg(priv, enhanced_txpower, element);
+		iwl_get_max_txpower_avg(priv, enhanced_txpower,
+					element, max_txpower_in_half_dbm);
+
 	ch_info = priv->channel_info;
 
 	for (ch = 0; ch < priv->channel_count; ch++) {
 		/* find matching band and update tx power if needed */
 		if ((ch_info->band == enhinfo[section].band) &&
-		    (ch_info->max_power_avg < max_txpower_avg) && (!is_ht40)) {
+		    (ch_info->max_power_avg < max_txpower_avg) &&
+		    (!is_ht40)) {
 			/* Update regulatory-based run-time data */
 			ch_info->max_power_avg = ch_info->curr_txpow =
-			    max_txpower_avg;
+				max_txpower_avg;
 			ch_info->scan_power = max_txpower_avg;
 		}
 		if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
-		    ch_info->ht40_max_power_avg &&
 		    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
 			/* Update regulatory-based run-time data */
 			ch_info->ht40_max_power_avg = max_txpower_avg;
-			ch_info->ht40_curr_txpow = max_txpower_avg;
-			ch_info->ht40_scan_power = max_txpower_avg;
 		}
 		ch_info++;
 	}
@@ -808,7 +859,7 @@
  */
 static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
 		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
-		int section, int element)
+		int section, int element, s8 *max_txpower_in_half_dbm)
 {
 	struct iwl_channel_info *ch_info;
 	int ch;
@@ -817,7 +868,8 @@
 
 	channel = enhinfo[section].iwl_eeprom_section_channel[element];
 	max_txpower_avg =
-		iwl_get_max_txpower_avg(priv, enhanced_txpower, element);
+		iwl_get_max_txpower_avg(priv, enhanced_txpower,
+					element, max_txpower_in_half_dbm);
 
 	ch_info = priv->channel_info;
 	for (ch = 0; ch < priv->channel_count; ch++) {
@@ -831,12 +883,9 @@
 				ch_info->scan_power = max_txpower_avg;
 			}
 			if ((enhinfo[section].is_ht40) &&
-			    (ch_info->ht40_max_power_avg) &&
 			    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
 				/* Update regulatory-based run-time data */
 				ch_info->ht40_max_power_avg = max_txpower_avg;
-				ch_info->ht40_curr_txpow = max_txpower_avg;
-				ch_info->ht40_scan_power = max_txpower_avg;
 			}
 			break;
 		}
@@ -855,6 +904,7 @@
 	struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
 	u32 offset;
 	s8 max_txpower_avg; /* (dBm) */
+	s8 max_txpower_in_half_dbm; /* (half-dBm) */
 
 	/* Loop through all the sections
 	 * adjust bands and channel's max tx power
@@ -867,20 +917,43 @@
 		enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
 				iwl_eeprom_query_addr(priv, offset);
 
+		/*
+		 * check for valid entry -
+		 * different version of EEPROM might contain different set
+		 * of enhanced tx power table
+		 * always check for valid entry before process
+		 * the information
+		 */
+		if (!enhanced_txpower->common || enhanced_txpower->reserved)
+			continue;
+
 		for (element = 0; element < eeprom_section_count; element++) {
 			if (enhinfo[section].is_common)
 				max_txpower_avg =
 					iwl_update_common_txpower(priv,
-					enhanced_txpower, section, element);
+						enhanced_txpower, section,
+						element,
+						&max_txpower_in_half_dbm);
 			else
 				max_txpower_avg =
 					iwl_update_channel_txpower(priv,
-					enhanced_txpower, section, element);
+						enhanced_txpower, section,
+						element,
+						&max_txpower_in_half_dbm);
 
 			/* Update the tx_power_user_lmt to the highest power
 			 * supported by any channel */
 			if (max_txpower_avg > priv->tx_power_user_lmt)
 				priv->tx_power_user_lmt = max_txpower_avg;
+
+			/*
+			 * Update the tx_power_lmt_in_half_dbm to
+			 * the highest power supported by any channel
+			 */
+			if (max_txpower_in_half_dbm >
+			    priv->tx_power_lmt_in_half_dbm)
+				priv->tx_power_lmt_in_half_dbm =
+					max_txpower_in_half_dbm;
 		}
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 80b9e45..5cd2b66 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -63,6 +63,8 @@
 #ifndef __iwl_eeprom_h__
 #define __iwl_eeprom_h__
 
+#include <net/mac80211.h>
+
 struct iwl_priv;
 
 /*
@@ -125,19 +127,21 @@
  *    Enhanced regulatory tx power portion of eeprom image can be broken down
  *    into individual structures; each one is 8 bytes in size and contain the
  *    following information
+ * @common: (desc + channel) not used by driver, should _NOT_ be "zero"
  * @chain_a_max_pwr: chain a max power in 1/2 dBm
  * @chain_b_max_pwr: chain b max power in 1/2 dBm
  * @chain_c_max_pwr: chain c max power in 1/2 dBm
+ * @reserved: not used, should be "zero"
  * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
  * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
  *
  */
 struct iwl_eeprom_enhanced_txpwr {
-	u16 reserved;
+	u16 common;
 	s8 chain_a_max;
 	s8 chain_b_max;
 	s8 chain_c_max;
-	s8 reserved1;
+	s8 reserved;
 	s8 mimo2_max;
 	s8 mimo3_max;
 } __attribute__ ((packed));
@@ -256,6 +260,15 @@
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION	(0x21E)
 
+/* 1000 Specific */
+#define EEPROM_1000_EEPROM_VERSION	(0x15C)
+
+/* 6x00 Specific */
+#define EEPROM_6000_EEPROM_VERSION	(0x434)
+
+/* 6x50 Specific */
+#define EEPROM_6050_EEPROM_VERSION	(0x532)
+
 /* OTP */
 /* lower blocks contain EEPROM image and calibration data */
 #define OTP_LOW_IMAGE_SIZE		(2 * 512 * sizeof(u16)) /* 2 KB */
@@ -370,12 +383,10 @@
 #define EEPROM_BOARD_PBA_NUMBER             (2*0x3B+1)	/* 9  bytes */
 #define EEPROM_VERSION                      (2*0x44)	/* 2  bytes */
 #define EEPROM_SKU_CAP                      (2*0x45)	/* 1  bytes */
-#define EEPROM_LEDS_MODE                    (2*0x45+1)	/* 1  bytes */
 #define EEPROM_OEM_MODE                     (2*0x46)	/* 2  bytes */
 #define EEPROM_WOWLAN_MODE                  (2*0x47)	/* 2  bytes */
 #define EEPROM_RADIO_CONFIG                 (2*0x48)	/* 2  bytes */
 #define EEPROM_3945_M_VERSION               (2*0x4A)	/* 1  bytes */
-#define EEPROM_ANTENNA_SWITCH_TYPE          (2*0x4A+1)	/* 1  bytes */
 
 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */
 #define EEPROM_RF_CFG_TYPE_MSK(x)   (x & 0x3)         /* bits 0-1   */
@@ -387,7 +398,12 @@
 
 #define EEPROM_3945_RF_CFG_TYPE_MAX  0x0
 #define EEPROM_4965_RF_CFG_TYPE_MAX  0x1
-#define EEPROM_5000_RF_CFG_TYPE_MAX  0x3
+
+/* Radio Config for 5000 and up */
+#define EEPROM_RF_CONFIG_TYPE_R3x3	0x0
+#define EEPROM_RF_CONFIG_TYPE_R2x2	0x1
+#define EEPROM_RF_CONFIG_TYPE_R1x2	0x2
+#define EEPROM_RF_CONFIG_TYPE_MAX	0x3
 
 /*
  * Per-channel regulatory data.
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index a6856da..a231659 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -56,6 +56,8 @@
 		IWL_CMD(REPLY_LEDS_CMD);
 		IWL_CMD(REPLY_TX_LINK_QUALITY_CMD);
 		IWL_CMD(COEX_PRIORITY_TABLE_CMD);
+		IWL_CMD(COEX_MEDIUM_NOTIFICATION);
+		IWL_CMD(COEX_EVENT_CMD);
 		IWL_CMD(RADAR_NOTIFICATION);
 		IWL_CMD(REPLY_QUIET_CMD);
 		IWL_CMD(REPLY_CHANNEL_SWITCH);
@@ -93,6 +95,8 @@
 		IWL_CMD(CALIBRATION_RES_NOTIFICATION);
 		IWL_CMD(CALIBRATION_COMPLETE_NOTIFICATION);
 		IWL_CMD(REPLY_TX_POWER_DBM_CMD);
+		IWL_CMD(TEMPERATURE_NOTIFICATION);
+		IWL_CMD(TX_ANT_CONFIGURATION_CMD);
 	default:
 		return "UNKNOWN";
 
@@ -104,17 +108,8 @@
 
 static void iwl_generic_cmd_callback(struct iwl_priv *priv,
 				     struct iwl_device_cmd *cmd,
-				     struct sk_buff *skb)
+				     struct iwl_rx_packet *pkt)
 {
-	struct iwl_rx_packet *pkt = NULL;
-
-	if (!skb) {
-		IWL_ERR(priv, "Error: Response NULL in %s.\n",
-				get_cmd_string(cmd->hdr.cmd));
-		return;
-	}
-
-	pkt = (struct iwl_rx_packet *)skb->data;
 	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from %s (0x%08X)\n",
 			get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
@@ -205,18 +200,18 @@
 	}
 
 	if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
-		IWL_DEBUG_INFO(priv, "Command %s aborted: RF KILL Switch\n",
+		IWL_ERR(priv, "Command %s aborted: RF KILL Switch\n",
 			       get_cmd_string(cmd->id));
 		ret = -ECANCELED;
 		goto fail;
 	}
 	if (test_bit(STATUS_FW_ERROR, &priv->status)) {
-		IWL_DEBUG_INFO(priv, "Command %s failed: FW Error\n",
+		IWL_ERR(priv, "Command %s failed: FW Error\n",
 			       get_cmd_string(cmd->id));
 		ret = -EIO;
 		goto fail;
 	}
-	if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_skb) {
+	if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_page) {
 		IWL_ERR(priv, "Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
@@ -238,9 +233,9 @@
 							~CMD_WANT_SKB;
 	}
 fail:
-	if (cmd->reply_skb) {
-		dev_kfree_skb_any(cmd->reply_skb);
-		cmd->reply_skb = NULL;
+	if (cmd->reply_page) {
+		free_pages(cmd->reply_page, priv->hw_params.rx_page_order);
+		cmd->reply_page = 0;
 	}
 out:
 	clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
@@ -273,7 +268,7 @@
 			   u8 id, u16 len, const void *data,
 			   void (*callback)(struct iwl_priv *priv,
 					    struct iwl_device_cmd *cmd,
-					    struct sk_buff *skb))
+					    struct iwl_rx_packet *pkt))
 {
 	struct iwl_host_cmd cmd = {
 		.id = id,
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index d30cb02..e552d4c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 
 #include "iwl-debug.h"
+#include "iwl-devtrace.h"
 
 /*
  * IO, register, and NIC memory access functions
@@ -61,7 +62,32 @@
  *
  */
 
-#define _iwl_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs))
+static inline void _iwl_write8(struct iwl_priv *priv, u32 ofs, u8 val)
+{
+	trace_iwlwifi_dev_iowrite8(priv, ofs, val);
+	iowrite8(val, priv->hw_base + ofs);
+}
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+static inline void __iwl_write8(const char *f, u32 l, struct iwl_priv *priv,
+				 u32 ofs, u8 val)
+{
+	IWL_DEBUG_IO(priv, "write8(0x%08X, 0x%02X) - %s %d\n", ofs, val, f, l);
+	_iwl_write8(priv, ofs, val);
+}
+#define iwl_write8(priv, ofs, val) \
+	__iwl_write8(__FILE__, __LINE__, priv, ofs, val)
+#else
+#define iwl_write8(priv, ofs, val) _iwl_write8(priv, ofs, val)
+#endif
+
+
+static inline void _iwl_write32(struct iwl_priv *priv, u32 ofs, u32 val)
+{
+	trace_iwlwifi_dev_iowrite32(priv, ofs, val);
+	iowrite32(val, priv->hw_base + ofs);
+}
+
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv,
 				 u32 ofs, u32 val)
@@ -75,7 +101,13 @@
 #define iwl_write32(priv, ofs, val) _iwl_write32(priv, ofs, val)
 #endif
 
-#define _iwl_read32(priv, ofs) ioread32((priv)->hw_base + (ofs))
+static inline u32 _iwl_read32(struct iwl_priv *priv, u32 ofs)
+{
+	u32 val = ioread32(priv->hw_base + ofs);
+	trace_iwlwifi_dev_ioread32(priv, ofs, val);
+	return val;
+}
+
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs)
 {
@@ -188,6 +220,26 @@
 
 	/* this bit wakes up the NIC */
 	_iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+
+	/*
+	 * These bits say the device is running, and should keep running for
+	 * at least a short while (at least as long as MAC_ACCESS_REQ stays 1),
+	 * but they do not indicate that embedded SRAM is restored yet;
+	 * 3945 and 4965 have volatile SRAM, and must save/restore contents
+	 * to/from host DRAM when sleeping/waking for power-saving.
+	 * Each direction takes approximately 1/4 millisecond; with this
+	 * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a
+	 * series of register accesses are expected (e.g. reading Event Log),
+	 * to keep device from sleeping.
+	 *
+	 * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that
+	 * SRAM is okay/restored.  We don't check that here because this call
+	 * is just for hardware register access; but GP1 MAC_SLEEP check is a
+	 * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log).
+	 *
+	 * 5000 series and later (including 1000 series) have non-volatile SRAM,
+	 * and do not save/restore SRAM when power cycling.
+	 */
 	ret = _iwl_poll_bit(priv, CSR_GP_CNTRL,
 			   CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN,
 			   (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY |
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index f420c99..46c7a95 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -42,15 +42,11 @@
 #include "iwl-core.h"
 #include "iwl-io.h"
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static const char *led_type_str[] = {
-	__stringify(IWL_LED_TRG_TX),
-	__stringify(IWL_LED_TRG_RX),
-	__stringify(IWL_LED_TRG_ASSOC),
-	__stringify(IWL_LED_TRG_RADIO),
-	NULL
-};
-#endif /* CONFIG_IWLWIFI_DEBUG */
+/* default: IWL_LED_BLINK(0) using blinking index table */
+static int led_mode;
+module_param(led_mode, int, S_IRUGO);
+MODULE_PARM_DESC(led_mode, "led mode: 0=blinking, 1=On(RF On)/Off(RF Off), "
+			   "(default 0)\n");
 
 
 static const struct {
@@ -65,11 +61,11 @@
 	{70, 65, 65},
 	{50, 75, 75},
 	{20, 85, 85},
-	{15, 95, 95 },
-	{10, 110, 110},
-	{5, 130, 130},
+	{10, 95, 95},
+	{5, 110, 110},
+	{1, 130, 130},
 	{0, 167, 167},
-/* SOLID_ON */
+	/* SOLID_ON */
 	{-1, IWL_LED_SOLID, 0}
 };
 
@@ -78,102 +74,68 @@
 #define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /* exclude SOLID_ON */
 #define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1)
 
-/*  [0-256] -> [0..8] FIXME: we need [0..10] */
-static inline int iwl_brightness_to_idx(enum led_brightness brightness)
+/*
+ * Adjust led blink rate to compensate on a MAC Clock difference on every HW
+ * Led blink rate analysis showed an average deviation of 0% on 3945,
+ * 5% on 4965 HW and 20% on 5000 series and up.
+ * Need to compensate on the led on/off time per HW according to the deviation
+ * to achieve the desired led frequency
+ * The calculation is: (100-averageDeviation)/100 * blinkTime
+ * For code efficiency the calculation will be:
+ *     compensation = (100 - averageDeviation) * 64 / 100
+ *     NewBlinkTime = (compensation * BlinkTime) / 64
+ */
+static inline u8 iwl_blink_compensation(struct iwl_priv *priv,
+				    u8 time, u16 compensation)
 {
-	return fls(0x000000FF & (u32)brightness);
-}
+	if (!compensation) {
+		IWL_ERR(priv, "undefined blink compensation: "
+			"use pre-defined blinking time\n");
+		return time;
+	}
 
-/* Send led command */
-static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
-{
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_LEDS_CMD,
-		.len = sizeof(struct iwl_led_cmd),
-		.data = led_cmd,
-		.flags = CMD_ASYNC,
-		.callback = NULL,
-	};
-	u32 reg;
-
-	reg = iwl_read32(priv, CSR_LED_REG);
-	if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
-		iwl_write32(priv, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
-
-	return iwl_send_cmd(priv, &cmd);
+	return (u8)((time * compensation) >> 6);
 }
 
 /* Set led pattern command */
-static int iwl_led_pattern(struct iwl_priv *priv, int led_id,
-			       unsigned int idx)
+static int iwl_led_pattern(struct iwl_priv *priv, unsigned int idx)
 {
 	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
+		.id = IWL_LED_LINK,
 		.interval = IWL_DEF_LED_INTRVL
 	};
 
 	BUG_ON(idx > IWL_MAX_BLINK_TBL);
 
-	led_cmd.on = blink_tbl[idx].on_time;
-	led_cmd.off = blink_tbl[idx].off_time;
+	IWL_DEBUG_LED(priv, "Led blink time compensation= %u\n",
+			priv->cfg->led_compensation);
+	led_cmd.on =
+		iwl_blink_compensation(priv, blink_tbl[idx].on_time,
+					priv->cfg->led_compensation);
+	led_cmd.off =
+		iwl_blink_compensation(priv, blink_tbl[idx].off_time,
+					priv->cfg->led_compensation);
 
-	return iwl_send_led_cmd(priv, &led_cmd);
+	return priv->cfg->ops->led->cmd(priv, &led_cmd);
 }
 
-/* Set led register off */
-static int iwl_led_on_reg(struct iwl_priv *priv, int led_id)
+int iwl_led_start(struct iwl_priv *priv)
 {
-	IWL_DEBUG_LED(priv, "led on %d\n", led_id);
-	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
-	return 0;
+	return priv->cfg->ops->led->on(priv);
 }
+EXPORT_SYMBOL(iwl_led_start);
 
-#if 0
-/* Set led on command */
-static int iwl_led_on(struct iwl_priv *priv, int led_id)
-{
-	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
-		.on = IWL_LED_SOLID,
-		.off = 0,
-		.interval = IWL_DEF_LED_INTRVL
-	};
-	return iwl_send_led_cmd(priv, &led_cmd);
-}
-
-/* Set led off command */
-int iwl_led_off(struct iwl_priv *priv, int led_id)
-{
-	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
-		.on = 0,
-		.off = 0,
-		.interval = IWL_DEF_LED_INTRVL
-	};
-	IWL_DEBUG_LED(priv, "led off %d\n", led_id);
-	return iwl_send_led_cmd(priv, &led_cmd);
-}
-#endif
-
-
-/* Set led register off */
-static int iwl_led_off_reg(struct iwl_priv *priv, int led_id)
-{
-	IWL_DEBUG_LED(priv, "LED Reg off\n");
-	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
-	return 0;
-}
-
-/*
- * Set led register in case of disassociation according to rfkill state
- */
-static int iwl_led_associate(struct iwl_priv *priv, int led_id)
+int iwl_led_associate(struct iwl_priv *priv)
 {
 	IWL_DEBUG_LED(priv, "Associated\n");
-	priv->allow_blinking = 1;
-	return iwl_led_on_reg(priv, led_id);
+	if (led_mode == IWL_LED_BLINK)
+		priv->allow_blinking = 1;
+	priv->last_blink_time = jiffies;
+
+	return 0;
 }
-static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
+
+int iwl_led_disassociate(struct iwl_priv *priv)
 {
 	priv->allow_blinking = 0;
 
@@ -181,89 +143,6 @@
 }
 
 /*
- * brightness call back function for Tx/Rx LED
- */
-static int iwl_led_associated(struct iwl_priv *priv, int led_id)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    !test_bit(STATUS_READY, &priv->status))
-		return 0;
-
-
-	/* start counting Tx/Rx bytes */
-	if (!priv->last_blink_time && priv->allow_blinking)
-		priv->last_blink_time = jiffies;
-	return 0;
-}
-
-/*
- * brightness call back for association and radio
- */
-static void iwl_led_brightness_set(struct led_classdev *led_cdev,
-				       enum led_brightness brightness)
-{
-	struct iwl_led *led = container_of(led_cdev, struct iwl_led, led_dev);
-	struct iwl_priv *priv = led->priv;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-
-	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
-			led_type_str[led->type], brightness);
-	switch (brightness) {
-	case LED_FULL:
-		if (led->led_on)
-			led->led_on(priv, IWL_LED_LINK);
-		break;
-	case LED_OFF:
-		if (led->led_off)
-			led->led_off(priv, IWL_LED_LINK);
-		break;
-	default:
-		if (led->led_pattern) {
-			int idx = iwl_brightness_to_idx(brightness);
-			led->led_pattern(priv, IWL_LED_LINK, idx);
-		}
-		break;
-	}
-}
-
-
-
-/*
- * Register led class with the system
- */
-static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led,
-				   enum led_type type, u8 set_led,
-				   char *trigger)
-{
-	struct device *device = wiphy_dev(priv->hw->wiphy);
-	int ret;
-
-	led->led_dev.name = led->name;
-	led->led_dev.brightness_set = iwl_led_brightness_set;
-	led->led_dev.default_trigger = trigger;
-
-	led->priv = priv;
-	led->type = type;
-
-	ret = led_classdev_register(device, &led->led_dev);
-	if (ret) {
-		IWL_ERR(priv, "Error: failed to register led handler.\n");
-		return ret;
-	}
-
-	led->registered = 1;
-
-	if (set_led && led->led_on)
-		led->led_on(priv, IWL_LED_LINK);
-
-	return 0;
-}
-
-
-/*
  * calculate blink rate according to last second Tx/Rx activities
  */
 static int iwl_get_blink_rate(struct iwl_priv *priv)
@@ -288,7 +167,7 @@
 		i = IWL_MAX_BLINK_TBL;
 	else
 		for (i = 0; i < IWL_MAX_BLINK_TBL; i++)
-			if (tpt  > (blink_tbl[i].tpt * IWL_1MB_RATE))
+			if (tpt > (blink_tbl[i].tpt * IWL_1MB_RATE))
 				break;
 
 	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", i);
@@ -317,8 +196,7 @@
 		priv->last_blink_time = 0;
 		if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) {
 			priv->last_blink_rate = IWL_SOLID_BLINK_IDX;
-			iwl_led_pattern(priv, IWL_LED_LINK,
-					    IWL_SOLID_BLINK_IDX);
+			iwl_led_pattern(priv, IWL_SOLID_BLINK_IDX);
 		}
 		return;
 	}
@@ -331,111 +209,17 @@
 
 	/* call only if blink rate change */
 	if (blink_idx != priv->last_blink_rate)
-		iwl_led_pattern(priv, IWL_LED_LINK, blink_idx);
+		iwl_led_pattern(priv, blink_idx);
 
 	priv->last_blink_time = jiffies;
 	priv->last_blink_rate = blink_idx;
 }
+EXPORT_SYMBOL(iwl_leds_background);
 
-/* Register all led handler */
-int iwl_leds_register(struct iwl_priv *priv)
+void iwl_leds_init(struct iwl_priv *priv)
 {
-	char *trigger;
-	int ret;
-
 	priv->last_blink_rate = 0;
-	priv->led_tpt = 0;
 	priv->last_blink_time = 0;
 	priv->allow_blinking = 0;
-
-	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
-		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
-		 wiphy_name(priv->hw->wiphy));
-
-	priv->led[IWL_LED_TRG_RADIO].led_on = iwl_led_on_reg;
-	priv->led[IWL_LED_TRG_RADIO].led_off = iwl_led_off_reg;
-	priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1, trigger);
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
-		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s::assoc",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0, trigger);
-
-	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate;
-	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RX].name,
-		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s::RX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_pattern = iwl_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_TX].name,
-		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s::TX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_pattern = iwl_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	return 0;
-
-exit_fail:
-	iwl_leds_unregister(priv);
-	return ret;
 }
-EXPORT_SYMBOL(iwl_leds_register);
-
-/* unregister led class */
-static void iwl_leds_unregister_led(struct iwl_led *led, u8 set_led)
-{
-	if (!led->registered)
-		return;
-
-	led_classdev_unregister(&led->led_dev);
-
-	if (set_led)
-		led->led_dev.brightness_set(&led->led_dev, LED_OFF);
-	led->registered = 0;
-}
-
-/* Unregister all led handlers */
-void iwl_leds_unregister(struct iwl_priv *priv)
-{
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_ASSOC], 0);
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_RX], 0);
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_TX], 0);
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_RADIO], 1);
-}
-EXPORT_SYMBOL(iwl_leds_unregister);
-
+EXPORT_SYMBOL(iwl_leds_init);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index ef9b174..f47f053 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -30,9 +30,6 @@
 
 struct iwl_priv;
 
-#ifdef CONFIG_IWLWIFI_LEDS
-#include <linux/leds.h>
-
 #define IWL_LED_SOLID 11
 #define IWL_LED_NAME_LEN 31
 #define IWL_DEF_LED_INTRVL cpu_to_le32(1000)
@@ -47,38 +44,23 @@
 	IWL_LED_TRG_RADIO,
 	IWL_LED_TRG_MAX,
 };
-#endif
 
-#ifdef CONFIG_IWLWIFI_LEDS
-
-struct iwl_led {
-	struct iwl_priv *priv;
-	struct led_classdev led_dev;
-	char name[32];
-
-	int (*led_on) (struct iwl_priv *priv, int led_id);
-	int (*led_off) (struct iwl_priv *priv, int led_id);
-	int (*led_pattern) (struct iwl_priv *priv, int led_id, unsigned int idx);
-
-	enum led_type type;
-	unsigned int registered;
+/*
+ * LED mode
+ *    IWL_LED_BLINK:    adjust led blink rate based on blink table
+ *    IWL_LED_RF_STATE: turn LED on/off based on RF state
+ *			LED ON  = RF ON
+ *			LED OFF = RF OFF
+ */
+enum iwl_led_mode {
+	IWL_LED_BLINK,
+	IWL_LED_RF_STATE,
 };
 
-int iwl_leds_register(struct iwl_priv *priv);
-void iwl_leds_unregister(struct iwl_priv *priv);
+void iwl_leds_init(struct iwl_priv *priv);
 void iwl_leds_background(struct iwl_priv *priv);
+int iwl_led_start(struct iwl_priv *priv);
+int iwl_led_associate(struct iwl_priv *priv);
+int iwl_led_disassociate(struct iwl_priv *priv);
 
-#else
-static inline int iwl_leds_register(struct iwl_priv *priv)
-{
-	return 0;
-}
-static inline void iwl_leds_unregister(struct iwl_priv *priv)
-{
-}
-static inline void iwl_leds_background(struct iwl_priv *priv)
-{
-}
-
-#endif /* CONFIG_IWLWIFI_LEDS */
 #endif /* __iwl_leds_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 60be976..8ccc0bb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -66,7 +66,7 @@
 
 struct iwl_power_vec_entry {
 	struct iwl_powertable_cmd cmd;
-	u8 no_dtim;
+	u8 no_dtim;	/* number of skip dtim */
 };
 
 #define IWL_DTIM_RANGE_0_MAX	2
@@ -83,8 +83,9 @@
 				     cpu_to_le32(X4)}
 /* default power management (not Tx power) table values */
 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
+/* DTIM 0 - 2 */
 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
-	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
@@ -93,15 +94,17 @@
 
 
 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
+/* DTIM 3 - 10 */
 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
-	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
+	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
 };
 
 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
+/* DTIM 11 - */
 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
@@ -115,13 +118,15 @@
 				 enum iwl_power_level lvl, int period)
 {
 	const struct iwl_power_vec_entry *table;
-	int max_sleep, i;
-	bool skip;
+	int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
+	int i;
+	u8 skip;
+	u32 slp_itrvl;
 
 	table = range_2;
-	if (period < IWL_DTIM_RANGE_1_MAX)
+	if (period <= IWL_DTIM_RANGE_1_MAX)
 		table = range_1;
-	if (period < IWL_DTIM_RANGE_0_MAX)
+	if (period <= IWL_DTIM_RANGE_0_MAX)
 		table = range_0;
 
 	BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
@@ -129,34 +134,60 @@
 	*cmd = table[lvl].cmd;
 
 	if (period == 0) {
-		skip = false;
+		skip = 0;
 		period = 1;
+		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+			max_sleep[i] =  1;
+
 	} else {
-		skip = !!table[lvl].no_dtim;
+		skip = table[lvl].no_dtim;
+		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+			max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
+		max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
 	}
 
-	if (skip) {
-		__le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
-		max_sleep = le32_to_cpu(slp_itrvl);
-		if (max_sleep == 0xFF)
-			max_sleep = period * (skip + 1);
-		else if (max_sleep > period)
-			max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	/* figure out the listen interval based on dtim period and skip */
+	if (slp_itrvl == 0xFF)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32(period * (skip + 1));
+
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	if (slp_itrvl > period)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32((slp_itrvl / period) * period);
+
+	if (skip)
 		cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
-	} else {
-		max_sleep = period;
+	else
 		cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
-	}
 
-	for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
-		if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
-			cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
+
+	/* enforce max sleep interval */
+	for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
+		if (le32_to_cpu(cmd->sleep_interval[i]) >
+		    (max_sleep[i] * period))
+			cmd->sleep_interval[i] =
+				cpu_to_le32(max_sleep[i] * period);
+		if (i != (IWL_POWER_VEC_SIZE - 1)) {
+			if (le32_to_cpu(cmd->sleep_interval[i]) >
+			    le32_to_cpu(cmd->sleep_interval[i+1]))
+				cmd->sleep_interval[i] =
+					cmd->sleep_interval[i+1];
+		}
+	}
 
 	if (priv->power_data.pci_pm)
 		cmd->flags |= IWL_POWER_PCI_PM_MSK;
 	else
 		cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
 
+	IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
+			skip, period);
 	IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
 }
 
@@ -165,26 +196,26 @@
  *=============================================================================
  *                 Condition Nxt State  Condition Nxt State Condition Nxt State
  *-----------------------------------------------------------------------------
- *     IWL_TI_0     T >= 115   CT_KILL  115>T>=105   TI_1      N/A      N/A
- *     IWL_TI_1     T >= 115   CT_KILL  115>T>=110   TI_2     T<=95     TI_0
- *     IWL_TI_2     T >= 115   CT_KILL                        T<=100    TI_1
+ *     IWL_TI_0     T >= 114   CT_KILL  114>T>=105   TI_1      N/A      N/A
+ *     IWL_TI_1     T >= 114   CT_KILL  114>T>=110   TI_2     T<=95     TI_0
+ *     IWL_TI_2     T >= 114   CT_KILL                        T<=100    TI_1
  *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
  *=============================================================================
  */
 static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
-	{IWL_TI_1, 105, CT_KILL_THRESHOLD},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+	{IWL_TI_1, 105, CT_KILL_THRESHOLD - 1},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
 };
 static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
-	{IWL_TI_2, 110, CT_KILL_THRESHOLD},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+	{IWL_TI_2, 110, CT_KILL_THRESHOLD - 1},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
 };
 static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
 };
 static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
@@ -294,6 +325,9 @@
 
 	if (priv->cfg->broken_powersave)
 		iwl_power_sleep_cam_cmd(priv, &cmd);
+	else if (priv->cfg->supports_idle &&
+		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
+		iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_5, 20);
 	else if (tt->state >= IWL_TI_1)
 		iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
 	else if (!enabled)
@@ -348,6 +382,23 @@
 }
 EXPORT_SYMBOL(iwl_ht_enabled);
 
+bool iwl_within_ct_kill_margin(struct iwl_priv *priv)
+{
+	s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */
+	bool within_margin = false;
+
+	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+		temp = KELVIN_TO_CELSIUS(priv->temperature);
+
+	if (!priv->thermal_throttle.advanced_tt)
+		within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+				CT_KILL_THRESHOLD_LEGACY) ? true : false;
+	else
+		within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+				CT_KILL_THRESHOLD) ? true : false;
+	return within_margin;
+}
+
 enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
 {
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
@@ -372,6 +423,7 @@
 }
 
 #define CT_KILL_EXIT_DURATION (5)	/* 5 seconds duration */
+#define CT_KILL_WAITING_DURATION (300)	/* 300ms duration */
 
 /*
  * toggle the bit to wake up uCode and check the temperature
@@ -409,6 +461,7 @@
 		/* Reschedule the ct_kill timer to occur in
 		 * CT_KILL_EXIT_DURATION seconds to ensure we get a
 		 * thermal update */
+		IWL_DEBUG_POWER(priv, "schedule ct_kill exit timer\n");
 		mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
 			  CT_KILL_EXIT_DURATION * HZ);
 	}
@@ -432,6 +485,33 @@
 	}
 }
 
+static void iwl_tt_ready_for_ct_kill(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* temperature timer expired, ready to go into CT_KILL state */
+	if (tt->state != IWL_TI_CT_KILL) {
+		IWL_DEBUG_POWER(priv, "entering CT_KILL state when temperature timer expired\n");
+		tt->state = IWL_TI_CT_KILL;
+		set_bit(STATUS_CT_KILL, &priv->status);
+		iwl_perform_ct_kill_task(priv, true);
+	}
+}
+
+static void iwl_prepare_ct_kill_task(struct iwl_priv *priv)
+{
+	IWL_DEBUG_POWER(priv, "Prepare to enter IWL_TI_CT_KILL\n");
+	/* make request to retrieve statistics information */
+	iwl_send_statistics_request(priv, CMD_SYNC, false);
+	/* Reschedule the ct_kill wait timer */
+	mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm,
+		 jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION));
+}
+
 #define IWL_MINIMAL_POWER_THRESHOLD		(CT_KILL_THRESHOLD_LEGACY)
 #define IWL_REDUCED_PERFORMANCE_THRESHOLD_2	(100)
 #define IWL_REDUCED_PERFORMANCE_THRESHOLD_1	(90)
@@ -445,7 +525,7 @@
  *	Throttle early enough to lower the power consumption before
  *	drastic steps are needed
  */
-static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp)
+static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
 {
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
 	enum iwl_tt_state old_state;
@@ -474,6 +554,8 @@
 #ifdef CONFIG_IWLWIFI_DEBUG
 	tt->tt_previous_temp = temp;
 #endif
+	/* stop ct_kill_waiting_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
 	if (tt->state != old_state) {
 		switch (tt->state) {
 		case IWL_TI_0:
@@ -494,17 +576,28 @@
 			break;
 		}
 		mutex_lock(&priv->mutex);
-		if (iwl_power_update_mode(priv, true)) {
+		if (old_state == IWL_TI_CT_KILL)
+			clear_bit(STATUS_CT_KILL, &priv->status);
+		if (tt->state != IWL_TI_CT_KILL &&
+		    iwl_power_update_mode(priv, true)) {
 			/* TT state not updated
 			 * try again during next temperature read
 			 */
+			if (old_state == IWL_TI_CT_KILL)
+				set_bit(STATUS_CT_KILL, &priv->status);
 			tt->state = old_state;
 			IWL_ERR(priv, "Cannot update power mode, "
 					"TT state not updated\n");
 		} else {
-			if (tt->state == IWL_TI_CT_KILL)
-				iwl_perform_ct_kill_task(priv, true);
-			else if (old_state == IWL_TI_CT_KILL &&
+			if (tt->state == IWL_TI_CT_KILL) {
+				if (force) {
+					set_bit(STATUS_CT_KILL, &priv->status);
+					iwl_perform_ct_kill_task(priv, true);
+				} else {
+					iwl_prepare_ct_kill_task(priv);
+					tt->state = old_state;
+				}
+			} else if (old_state == IWL_TI_CT_KILL &&
 				 tt->state != IWL_TI_CT_KILL)
 				iwl_perform_ct_kill_task(priv, false);
 			IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
@@ -531,13 +624,13 @@
  *=============================================================================
  *                 Condition Nxt State  Condition Nxt State Condition Nxt State
  *-----------------------------------------------------------------------------
- *     IWL_TI_0     T >= 115   CT_KILL  115>T>=105   TI_1      N/A      N/A
- *     IWL_TI_1     T >= 115   CT_KILL  115>T>=110   TI_2     T<=95     TI_0
- *     IWL_TI_2     T >= 115   CT_KILL                        T<=100    TI_1
+ *     IWL_TI_0     T >= 114   CT_KILL  114>T>=105   TI_1      N/A      N/A
+ *     IWL_TI_1     T >= 114   CT_KILL  114>T>=110   TI_2     T<=95     TI_0
+ *     IWL_TI_2     T >= 114   CT_KILL                        T<=100    TI_1
  *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
  *=============================================================================
  */
-static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp)
+static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
 {
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
 	int i;
@@ -582,6 +675,8 @@
 			break;
 		}
 	}
+	/* stop ct_kill_waiting_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
 	if (changed) {
 		struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
 
@@ -613,12 +708,17 @@
 			iwl_set_rxon_ht(priv, &priv->current_ht_config);
 		}
 		mutex_lock(&priv->mutex);
-		if (iwl_power_update_mode(priv, true)) {
+		if (old_state == IWL_TI_CT_KILL)
+			clear_bit(STATUS_CT_KILL, &priv->status);
+		if (tt->state != IWL_TI_CT_KILL &&
+		    iwl_power_update_mode(priv, true)) {
 			/* TT state not updated
 			 * try again during next temperature read
 			 */
 			IWL_ERR(priv, "Cannot update power mode, "
 					"TT state not updated\n");
+			if (old_state == IWL_TI_CT_KILL)
+				set_bit(STATUS_CT_KILL, &priv->status);
 			tt->state = old_state;
 		} else {
 			IWL_DEBUG_POWER(priv,
@@ -626,9 +726,15 @@
 					tt->state);
 			if (old_state != IWL_TI_CT_KILL &&
 			    tt->state == IWL_TI_CT_KILL) {
-				IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n");
-				iwl_perform_ct_kill_task(priv, true);
-
+				if (force) {
+					IWL_DEBUG_POWER(priv,
+						"Enter IWL_TI_CT_KILL\n");
+					set_bit(STATUS_CT_KILL, &priv->status);
+					iwl_perform_ct_kill_task(priv, true);
+				} else {
+					iwl_prepare_ct_kill_task(priv);
+					tt->state = old_state;
+				}
 			} else if (old_state == IWL_TI_CT_KILL &&
 				  tt->state != IWL_TI_CT_KILL) {
 				IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
@@ -665,10 +771,11 @@
 			      "- ucode going to sleep!\n");
 		if (!priv->thermal_throttle.advanced_tt)
 			iwl_legacy_tt_handler(priv,
-					      IWL_MINIMAL_POWER_THRESHOLD);
+					      IWL_MINIMAL_POWER_THRESHOLD,
+					      true);
 		else
 			iwl_advance_tt_handler(priv,
-					       CT_KILL_THRESHOLD + 1);
+					       CT_KILL_THRESHOLD + 1, true);
 	}
 }
 
@@ -695,11 +802,18 @@
 		IWL_ERR(priv,
 			"Device temperature below critical"
 			"- ucode awake!\n");
+		/*
+		 * exit from CT_KILL state
+		 * reset the current temperature reading
+		 */
+		priv->temperature = 0;
 		if (!priv->thermal_throttle.advanced_tt)
 			iwl_legacy_tt_handler(priv,
-					IWL_REDUCED_PERFORMANCE_THRESHOLD_2);
+					      IWL_REDUCED_PERFORMANCE_THRESHOLD_2,
+					      true);
 		else
-			iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD);
+			iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD,
+					       true);
 	}
 }
 
@@ -735,9 +849,9 @@
 		temp = KELVIN_TO_CELSIUS(priv->temperature);
 
 	if (!priv->thermal_throttle.advanced_tt)
-		iwl_legacy_tt_handler(priv, temp);
+		iwl_legacy_tt_handler(priv, temp, false);
 	else
-		iwl_advance_tt_handler(priv, temp);
+		iwl_advance_tt_handler(priv, temp, false);
 }
 
 void iwl_tt_handler(struct iwl_priv *priv)
@@ -768,16 +882,18 @@
 	tt->state = IWL_TI_0;
 	init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
 	priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
-	priv->thermal_throttle.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill;
-
+	priv->thermal_throttle.ct_kill_exit_tm.function =
+		iwl_tt_check_exit_ct_kill;
+	init_timer(&priv->thermal_throttle.ct_kill_waiting_tm);
+	priv->thermal_throttle.ct_kill_waiting_tm.data = (unsigned long)priv;
+	priv->thermal_throttle.ct_kill_waiting_tm.function =
+		iwl_tt_ready_for_ct_kill;
 	/* setup deferred ct kill work */
 	INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
 	INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
 	INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_6x00:
-	case CSR_HW_REV_TYPE_6x50:
+	if (priv->cfg->adv_thermal_throttle) {
 		IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
 		tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
 					 IWL_TI_STATE_MAX, GFP_KERNEL);
@@ -810,11 +926,9 @@
 				&restriction_range[0], size);
 			priv->thermal_throttle.advanced_tt = true;
 		}
-		break;
-	default:
+	} else {
 		IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
 		priv->thermal_throttle.advanced_tt = false;
-		break;
 	}
 }
 EXPORT_SYMBOL(iwl_tt_initialize);
@@ -826,6 +940,8 @@
 
 	/* stop ct_kill_exit_tm timer if activated */
 	del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+	/* stop ct_kill_waiting_tm timer if activated */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
 	cancel_work_sync(&priv->tt_work);
 	cancel_work_sync(&priv->ct_enter);
 	cancel_work_sync(&priv->ct_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index df6f6a4..310c32e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -33,6 +33,7 @@
 #define IWL_ABSOLUTE_ZERO		0
 #define IWL_ABSOLUTE_MAX		0xFFFFFFFF
 #define IWL_TT_INCREASE_MARGIN	5
+#define IWL_TT_CT_KILL_MARGIN	3
 
 enum iwl_antenna_ok {
 	IWL_ANT_OK_NONE,
@@ -110,6 +111,7 @@
 	struct iwl_tt_restriction *restriction;
 	struct iwl_tt_trans *transaction;
 	struct timer_list ct_kill_exit_tm;
+	struct timer_list ct_kill_waiting_tm;
 };
 
 enum iwl_power_level {
@@ -129,6 +131,7 @@
 
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
 bool iwl_ht_enabled(struct iwl_priv *priv);
+bool iwl_within_ct_kill_margin(struct iwl_priv *priv);
 enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
 enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
 void iwl_tt_enter_ct_kill(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index d393e8f..6d95832 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -254,7 +254,8 @@
  * device.  A queue maps to only one (selectable by driver) Tx DMA channel,
  * but one DMA channel may take input from several queues.
  *
- * Tx DMA channels have dedicated purposes.  For 4965, they are used as follows:
+ * Tx DMA channels have dedicated purposes.  For 4965, they are used as follows
+ * (cf. default_queue_to_tx_fifo in iwl-4965.c):
  *
  * 0 -- EDCA BK (background) frames, lowest priority
  * 1 -- EDCA BE (best effort) frames, normal priority
@@ -265,9 +266,21 @@
  * 6 -- HCCA long frames
  * 7 -- not used by driver (device-internal only)
  *
+ * For 5000 series and up, they are used slightly differently
+ * (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
+ *
+ * 0 -- EDCA BK (background) frames, lowest priority
+ * 1 -- EDCA BE (best effort) frames, normal priority
+ * 2 -- EDCA VI (video) frames, higher priority
+ * 3 -- EDCA VO (voice) and management frames, highest priority
+ * 4 -- (TBD)
+ * 5 -- HCCA short frames
+ * 6 -- HCCA long frames
+ * 7 -- Commands
+ *
  * Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
- * In addition, driver can map queues 7-15 to Tx DMA/FIFO channels 0-3 to
- * support 11n aggregation via EDCA DMA channels.
+ * In addition, driver can map the remaining queues to Tx DMA/FIFO
+ * channels 0-3 to support 11n aggregation via EDCA DMA channels.
  *
  * The driver sets up each queue to work in one of two modes:
  *
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 493626b..6090bc1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -140,6 +140,8 @@
 		reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
 
 		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+			IWL_DEBUG_INFO(priv, "Rx queue requesting wakeup, GP1 = 0x%x\n",
+				      reg);
 			iwl_set_bit(priv, CSR_GP_CNTRL,
 				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 			goto exit_unlock;
@@ -200,7 +202,7 @@
 		list_del(element);
 
 		/* Point to Rx buffer via next RBD in circular buffer */
-		rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr);
+		rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->page_dma);
 		rxq->queue[rxq->write] = rxb;
 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 		rxq->free_count--;
@@ -239,8 +241,9 @@
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
-	struct sk_buff *skb;
+	struct page *page;
 	unsigned long flags;
+	gfp_t gfp_mask = priority;
 
 	while (1) {
 		spin_lock_irqsave(&rxq->lock, flags);
@@ -251,30 +254,35 @@
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		if (rxq->free_count > RX_LOW_WATERMARK)
-			priority |= __GFP_NOWARN;
-		/* Alloc a new receive buffer */
-		skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
-						priority);
+			gfp_mask |= __GFP_NOWARN;
 
-		if (!skb) {
+		if (priv->hw_params.rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
+		/* Alloc a new receive buffer */
+		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+		if (!page) {
 			if (net_ratelimit())
-				IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+				IWL_DEBUG_INFO(priv, "alloc_pages failed, "
+					       "order: %d\n",
+					       priv->hw_params.rx_page_order);
+
 			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
 			    net_ratelimit())
-				IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+				IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
 					 priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
 					 rxq->free_count);
 			/* We don't reschedule replenish work here -- we will
 			 * call the restock method and if it still needs
 			 * more buffers it will schedule replenish */
-			break;
+			return;
 		}
 
 		spin_lock_irqsave(&rxq->lock, flags);
 
 		if (list_empty(&rxq->rx_used)) {
 			spin_unlock_irqrestore(&rxq->lock, flags);
-			dev_kfree_skb_any(skb);
+			__free_pages(page, priv->hw_params.rx_page_order);
 			return;
 		}
 		element = rxq->rx_used.next;
@@ -283,24 +291,21 @@
 
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
-		rxb->skb = skb;
-		/* Get physical address of RB/SKB */
-		rxb->real_dma_addr = pci_map_single(
-					priv->pci_dev,
-					rxb->skb->data,
-					priv->hw_params.rx_buf_size + 256,
-					PCI_DMA_FROMDEVICE);
+		rxb->page = page;
+		/* Get physical address of the RB */
+		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
 		/* dma address must be no more than 36 bits */
-		BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36));
+		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 		/* and also 256 byte aligned! */
-		rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256);
-		skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr);
+		BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
 
 		spin_lock_irqsave(&rxq->lock, flags);
 
 		list_add_tail(&rxb->list, &rxq->rx_free);
 		rxq->free_count++;
-		priv->alloc_rxb_skb++;
+		priv->alloc_rxb_page++;
 
 		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
@@ -336,12 +341,14 @@
 {
 	int i;
 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size + 256,
-					 PCI_DMA_FROMDEVICE);
-			dev_kfree_skb(rxq->pool[i].skb);
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
+			priv->alloc_rxb_page--;
 		}
 	}
 
@@ -405,14 +412,14 @@
 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 		/* In the reset function, these buffers may have been allocated
 		 * to an SKB, so we need to unmap and free potential storage */
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size + 256,
-					 PCI_DMA_FROMDEVICE);
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb(rxq->pool[i].skb);
-			rxq->pool[i].skb = NULL;
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			priv->alloc_rxb_page--;
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
 		}
 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
 	}
@@ -470,7 +477,8 @@
 			   (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
 			   (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
 
-	iwl_write32(priv, CSR_INT_COALESCING, 0x40);
+	/* Set interrupt coalescing timer to 64 x 32 = 2048 usecs */
+	iwl_write8(priv, CSR_INT_COALESCING, 0x40);
 
 	return 0;
 }
@@ -491,7 +499,7 @@
 				struct iwl_rx_mem_buffer *rxb)
 
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_missed_beacon_notif *missed_beacon;
 
 	missed_beacon = &pkt->u.missed_beacon;
@@ -548,13 +556,51 @@
 			priv->last_rx_noise);
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+/*
+ *  based on the assumption of all statistics counter are in DWORD
+ *  FIXME: This function is for debugging, do not deal with
+ *  the case of counters roll-over.
+ */
+static void iwl_accumulative_statistics(struct iwl_priv *priv,
+					__le32 *stats)
+{
+	int i;
+	__le32 *prev_stats;
+	u32 *accum_stats;
+
+	prev_stats = (__le32 *)&priv->statistics;
+	accum_stats = (u32 *)&priv->accum_statistics;
+
+	for (i = sizeof(__le32); i < sizeof(struct iwl_notif_statistics);
+	     i += sizeof(__le32), stats++, prev_stats++, accum_stats++)
+		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats))
+			*accum_stats += (le32_to_cpu(*stats) -
+				le32_to_cpu(*prev_stats));
+
+	/* reset accumulative statistics for "no-counter" type statistics */
+	priv->accum_statistics.general.temperature =
+		priv->statistics.general.temperature;
+	priv->accum_statistics.general.temperature_m =
+		priv->statistics.general.temperature_m;
+	priv->accum_statistics.general.ttl_timestamp =
+		priv->statistics.general.ttl_timestamp;
+	priv->accum_statistics.tx.tx_power.ant_a =
+		priv->statistics.tx.tx_power.ant_a;
+	priv->accum_statistics.tx.tx_power.ant_b =
+		priv->statistics.tx.tx_power.ant_b;
+	priv->accum_statistics.tx.tx_power.ant_c =
+		priv->statistics.tx.tx_power.ant_c;
+}
+#endif
+
 #define REG_RECALIB_PERIOD (60)
 
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb)
 {
 	int change;
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics),
@@ -566,6 +612,9 @@
 		    STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
 		   (pkt->u.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
+#endif
 	memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
 
 	set_bit(STATUS_STATISTICS, &priv->status);
@@ -582,14 +631,29 @@
 		iwl_rx_calc_noise(priv);
 		queue_work(priv->workqueue, &priv->run_time_calib_work);
 	}
-
-	iwl_leds_background(priv);
-
 	if (priv->cfg->ops->lib->temp_ops.temperature && change)
 		priv->cfg->ops->lib->temp_ops.temperature(priv);
 }
 EXPORT_SYMBOL(iwl_rx_statistics);
 
+void iwl_reply_statistics(struct iwl_priv *priv,
+			      struct iwl_rx_mem_buffer *rxb)
+{
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
+
+	if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATISTICS_CLEAR_MSK) {
+		memset(&priv->statistics, 0,
+			sizeof(struct iwl_notif_statistics));
+#ifdef CONFIG_IWLWIFI_DEBUG
+		memset(&priv->accum_statistics, 0,
+			sizeof(struct iwl_notif_statistics));
+#endif
+		IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
+	}
+	iwl_rx_statistics(priv, rxb);
+}
+EXPORT_SYMBOL(iwl_reply_statistics);
+
 #define PERFECT_RSSI (-20) /* dBm */
 #define WORST_RSSI (-95)   /* dBm */
 #define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
@@ -878,6 +942,10 @@
 					struct iwl_rx_mem_buffer *rxb,
 					struct ieee80211_rx_status *stats)
 {
+	struct sk_buff *skb;
+	int ret = 0;
+	__le16 fc = hdr->frame_control;
+
 	/* We only process data packets if the interface is open */
 	if (unlikely(!priv->is_open)) {
 		IWL_DEBUG_DROP_LIMIT(priv,
@@ -890,15 +958,44 @@
 	    iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
 		return;
 
-	/* Resize SKB from mac header to end of packet */
-	skb_reserve(rxb->skb, (void *)hdr - (void *)rxb->skb->data);
-	skb_put(rxb->skb, len);
+	skb = alloc_skb(IWL_LINK_HDR_MAX * 2, GFP_ATOMIC);
+	if (!skb) {
+		IWL_ERR(priv, "alloc_skb failed\n");
+		return;
+	}
 
-	iwl_update_stats(priv, false, hdr->frame_control, len);
-	memcpy(IEEE80211_SKB_RXCB(rxb->skb), stats, sizeof(*stats));
-	ieee80211_rx_irqsafe(priv->hw, rxb->skb);
-	priv->alloc_rxb_skb--;
-	rxb->skb = NULL;
+	skb_reserve(skb, IWL_LINK_HDR_MAX);
+	skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
+
+	/* mac80211 currently doesn't support paged SKB. Convert it to
+	 * linear SKB for management frame and data frame requires
+	 * software decryption or software defragementation. */
+	if (ieee80211_is_mgmt(fc) ||
+	    ieee80211_has_protected(fc) ||
+	    ieee80211_has_morefrags(fc) ||
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+		ret = skb_linearize(skb);
+	else
+		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
+			 0 : -ENOMEM;
+
+	if (ret) {
+		kfree_skb(skb);
+		goto out;
+	}
+
+	/*
+	 * XXX: We cannot touch the page and its virtual memory (hdr) after
+	 * here. It might have already been freed by the above skb change.
+	 */
+
+	iwl_update_stats(priv, false, fc, len);
+	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+	ieee80211_rx(priv->hw, skb);
+ out:
+	priv->alloc_rxb_page--;
+	rxb->page = NULL;
 }
 
 /* This is necessary only for a number of statistics, see the caller. */
@@ -926,13 +1023,12 @@
 {
 	struct ieee80211_hdr *header;
 	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_rx_phy_res *phy_res;
 	__le32 rx_pkt_status;
 	struct iwl4965_rx_mpdu_res_start *amsdu;
 	u32 len;
 	u32 ampdu_status;
-	u16 fc;
 	u32 rate_n_flags;
 
 	/**
@@ -1065,20 +1161,8 @@
 		priv->last_tsf = le64_to_cpu(phy_res->timestamp);
 	}
 
-	fc = le16_to_cpu(header->frame_control);
-	switch (fc & IEEE80211_FCTL_FTYPE) {
-	case IEEE80211_FTYPE_MGMT:
-	case IEEE80211_FTYPE_DATA:
-		if (priv->iw_mode == NL80211_IFTYPE_AP)
-			iwl_update_ps_mode(priv, fc  & IEEE80211_FCTL_PM,
-						header->addr2);
-		/* fall through */
-	default:
-		iwl_pass_packet_to_mac80211(priv, header, len, ampdu_status,
-				rxb, &rx_status);
-		break;
-
-	}
+	iwl_pass_packet_to_mac80211(priv, header, len, ampdu_status,
+				    rxb, &rx_status);
 }
 EXPORT_SYMBOL(iwl_rx_reply_rx);
 
@@ -1087,7 +1171,7 @@
 void iwl_rx_reply_rx_phy(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	priv->last_phy_res[0] = 1;
 	memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
 	       sizeof(struct iwl_rx_phy_res));
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 4f3a108..a2b2b83 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -27,7 +27,6 @@
  *****************************************************************************/
 #include <linux/types.h>
 #include <linux/etherdevice.h>
-#include <net/lib80211.h>
 #include <net/mac80211.h>
 
 #include "iwl-eeprom.h"
@@ -112,7 +111,7 @@
 static int iwl_send_scan_abort(struct iwl_priv *priv)
 {
 	int ret = 0;
-	struct iwl_rx_packet *res;
+	struct iwl_rx_packet *pkt;
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_SCAN_ABORT_CMD,
 		.flags = CMD_WANT_SKB,
@@ -132,21 +131,21 @@
 		return ret;
 	}
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->u.status != CAN_ABORT_STATUS) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->u.status != CAN_ABORT_STATUS) {
 		/* The scan abort will return 1 for success or
 		 * 2 for "failure".  A failure condition can be
 		 * due to simply not being in an active scan which
 		 * can occur if we send the scan abort before we
 		 * the microcode has notified us that a scan is
 		 * completed. */
-		IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", res->u.status);
+		IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", pkt->u.status);
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 		clear_bit(STATUS_SCAN_HW, &priv->status);
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return ret;
 }
@@ -156,7 +155,7 @@
 			      struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanreq_notification *notif =
 	    (struct iwl_scanreq_notification *)pkt->u.raw;
 
@@ -168,7 +167,7 @@
 static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanstart_notification *notif =
 	    (struct iwl_scanstart_notification *)pkt->u.raw;
 	priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
@@ -187,7 +186,7 @@
 				      struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanresults_notification *notif =
 	    (struct iwl_scanresults_notification *)pkt->u.raw;
 
@@ -214,7 +213,7 @@
 				       struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
 	IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
@@ -402,6 +401,7 @@
 	if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
 		priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
 }
+EXPORT_SYMBOL(iwl_init_scan_params);
 
 static int iwl_scan_initiate(struct iwl_priv *priv)
 {
@@ -581,6 +581,7 @@
 	u8 rate;
 	bool is_active = false;
 	int  chan_mod;
+	u8 active_chains;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
 
@@ -734,9 +735,22 @@
 	rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
 	scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
 
+	/* In power save mode use one chain, otherwise use all chains */
+	if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+		/* rx_ant has been set to all valid chains previously */
+		active_chains = rx_ant &
+				((u8)(priv->chain_noise_data.active_chains));
+		if (!active_chains)
+			active_chains = rx_ant;
+
+		IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
+				priv->chain_noise_data.active_chains);
+
+		rx_ant = first_antenna(active_chains);
+	}
 	/* MIMO is not used here, but value is required */
-	rx_chain |= ANT_ABC << RXON_RX_CHAIN_VALID_POS;
-	rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+	rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
 	rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
 	rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
 	scan->rx_chain = cpu_to_le16(rx_chain);
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.c b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
index 022bcf1..1ea5cd3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.c
+++ b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
@@ -177,7 +177,7 @@
 static void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
 					  struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
 
 	if (!report->state) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index c6633fe..cd6a690 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -99,32 +99,25 @@
 
 static void iwl_add_sta_callback(struct iwl_priv *priv,
 				 struct iwl_device_cmd *cmd,
-				 struct sk_buff *skb)
+				 struct iwl_rx_packet *pkt)
 {
-	struct iwl_rx_packet *res = NULL;
 	struct iwl_addsta_cmd *addsta =
 		(struct iwl_addsta_cmd *)cmd->cmd.payload;
 	u8 sta_id = addsta->sta.sta_id;
 
-	if (!skb) {
-		IWL_ERR(priv, "Error: Response NULL in REPLY_ADD_STA.\n");
-		return;
-	}
-
-	res = (struct iwl_rx_packet *)skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
-			  res->hdr.flags);
+			  pkt->hdr.flags);
 		return;
 	}
 
-	switch (res->u.add_sta.status) {
+	switch (pkt->u.add_sta.status) {
 	case ADD_STA_SUCCESS_MSK:
 		iwl_sta_ucode_activate(priv, sta_id);
 		 /* fall through */
 	default:
 		IWL_DEBUG_HC(priv, "Received REPLY_ADD_STA:(0x%08X)\n",
-			     res->u.add_sta.status);
+			     pkt->u.add_sta.status);
 		break;
 	}
 }
@@ -132,7 +125,7 @@
 int iwl_send_add_sta(struct iwl_priv *priv,
 		     struct iwl_addsta_cmd *sta, u8 flags)
 {
-	struct iwl_rx_packet *res = NULL;
+	struct iwl_rx_packet *pkt = NULL;
 	int ret = 0;
 	u8 data[sizeof(*sta)];
 	struct iwl_host_cmd cmd = {
@@ -152,15 +145,15 @@
 	if (ret || (flags & CMD_ASYNC))
 		return ret;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
-			  res->hdr.flags);
+			  pkt->hdr.flags);
 		ret = -EIO;
 	}
 
 	if (ret == 0) {
-		switch (res->u.add_sta.status) {
+		switch (pkt->u.add_sta.status) {
 		case ADD_STA_SUCCESS_MSK:
 			iwl_sta_ucode_activate(priv, sta->sta.sta_id);
 			IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n");
@@ -172,8 +165,8 @@
 		}
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return ret;
 }
@@ -189,6 +182,11 @@
 		goto done;
 
 	mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
+	IWL_DEBUG_ASSOC(priv, "spatial multiplexing power save mode: %s\n",
+			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ?
+			"static" :
+			(mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ?
+			"dynamic" : "disabled");
 
 	sta_flags = priv->stations[index].sta.station_flags;
 
@@ -324,26 +322,19 @@
 
 static void iwl_remove_sta_callback(struct iwl_priv *priv,
 				    struct iwl_device_cmd *cmd,
-				    struct sk_buff *skb)
+				    struct iwl_rx_packet *pkt)
 {
-	struct iwl_rx_packet *res = NULL;
 	struct iwl_rem_sta_cmd *rm_sta =
-		 (struct iwl_rem_sta_cmd *)cmd->cmd.payload;
+			(struct iwl_rem_sta_cmd *)cmd->cmd.payload;
 	const char *addr = rm_sta->addr;
 
-	if (!skb) {
-		IWL_ERR(priv, "Error: Response NULL in REPLY_REMOVE_STA.\n");
-		return;
-	}
-
-	res = (struct iwl_rx_packet *)skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
-		res->hdr.flags);
+		pkt->hdr.flags);
 		return;
 	}
 
-	switch (res->u.rem_sta.status) {
+	switch (pkt->u.rem_sta.status) {
 	case REM_STA_SUCCESS_MSK:
 		iwl_sta_ucode_deactivate(priv, addr);
 		break;
@@ -356,7 +347,7 @@
 static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr,
 				   u8 flags)
 {
-	struct iwl_rx_packet *res = NULL;
+	struct iwl_rx_packet *pkt;
 	int ret;
 
 	struct iwl_rem_sta_cmd rm_sta_cmd;
@@ -381,15 +372,15 @@
 	if (ret || (flags & CMD_ASYNC))
 		return ret;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
-			  res->hdr.flags);
+			  pkt->hdr.flags);
 		ret = -EIO;
 	}
 
 	if (!ret) {
-		switch (res->u.rem_sta.status) {
+		switch (pkt->u.rem_sta.status) {
 		case REM_STA_SUCCESS_MSK:
 			iwl_sta_ucode_deactivate(priv, addr);
 			IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n");
@@ -401,8 +392,8 @@
 		}
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return ret;
 }
@@ -1026,7 +1017,7 @@
 	 */
 	if (priv->current_ht_config.is_ht) {
 		rcu_read_lock();
-		sta = ieee80211_find_sta(priv->hw, addr);
+		sta = ieee80211_find_sta(priv->vif, addr);
 		if (sta) {
 			memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config));
 			cur_ht_config = &ht_config;
@@ -1044,6 +1035,68 @@
 EXPORT_SYMBOL(iwl_rxon_add_station);
 
 /**
+ * iwl_sta_init_bcast_lq - Initialize a bcast station's hardware rate table
+ *
+ * NOTE: Run REPLY_ADD_STA command to set up station table entry, before
+ *       calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
+ *       which requires station table entry to exist).
+ */
+static void iwl_sta_init_bcast_lq(struct iwl_priv *priv)
+{
+	int i, r;
+	struct iwl_link_quality_cmd link_cmd = {
+		.reserved1 = 0,
+	};
+	u32 rate_flags;
+
+	/* Set up the rate scaling to start at selected rate, fall back
+	 * all the way down to 1M in IEEE order, and then spin on 1M */
+	if (priv->band == IEEE80211_BAND_5GHZ)
+		r = IWL_RATE_6M_INDEX;
+	else
+		r = IWL_RATE_1M_INDEX;
+
+	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+		rate_flags = 0;
+		if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
+			rate_flags |= RATE_MCS_CCK_MSK;
+
+		rate_flags |= first_antenna(priv->hw_params.valid_tx_ant) <<
+				RATE_MCS_ANT_POS;
+
+		link_cmd.rs_table[i].rate_n_flags =
+			iwl_hw_set_rate_n_flags(iwl_rates[r].plcp, rate_flags);
+		r = iwl_get_prev_ieee_rate(r);
+	}
+
+	link_cmd.general_params.single_stream_ant_msk =
+				first_antenna(priv->hw_params.valid_tx_ant);
+	link_cmd.general_params.dual_stream_ant_msk = 3;
+	link_cmd.agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+	link_cmd.agg_params.agg_time_limit =
+		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+
+	/* Update the rate scaling for control frame Tx to AP */
+	link_cmd.sta_id = priv->hw_params.bcast_sta_id;
+
+	iwl_send_cmd_pdu_async(priv, REPLY_TX_LINK_QUALITY_CMD,
+			       sizeof(link_cmd), &link_cmd, NULL);
+}
+
+
+/**
+ * iwl_add_bcast_station - add broadcast station into station table.
+ */
+void iwl_add_bcast_station(struct iwl_priv *priv)
+{
+	iwl_add_station(priv, iwl_bcast_addr, false, CMD_SYNC, NULL);
+
+	/* Set up default rate scaling table in device's station table */
+	iwl_sta_init_bcast_lq(priv);
+}
+EXPORT_SYMBOL(iwl_add_bcast_station);
+
+/**
  * iwl_get_sta_id - Find station's index within station table
  *
  * If new IBSS station, create new entry in station table
@@ -1163,7 +1216,7 @@
 }
 EXPORT_SYMBOL(iwl_sta_rx_agg_stop);
 
-static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
+void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
 {
 	unsigned long flags;
 
@@ -1171,27 +1224,26 @@
 	priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK;
 	priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
 	priv->stations[sta_id].sta.sta.modify_mask = 0;
+	priv->stations[sta_id].sta.sleep_tx_count = 0;
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
 	iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 }
+EXPORT_SYMBOL(iwl_sta_modify_ps_wake);
 
-void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr)
+void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt)
 {
-	/* FIXME: need locking over ps_status ??? */
-	u8 sta_id = iwl_find_station(priv, addr);
+	unsigned long flags;
 
-	if (sta_id != IWL_INVALID_STATION) {
-		u8 sta_awake = priv->stations[sta_id].
-				ps_status == STA_PS_STATUS_WAKE;
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	priv->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK;
+	priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
+	priv->stations[sta_id].sta.sta.modify_mask =
+					STA_MODIFY_SLEEP_TX_COUNT_MSK;
+	priv->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt);
+	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
-		if (sta_awake && ps_bit)
-			priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP;
-		else if (!sta_awake && !ps_bit) {
-			iwl_sta_modify_ps_wake(priv, sta_id);
-			priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE;
-		}
-	}
+	iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 }
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 6deebad..8d052de 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -52,6 +52,7 @@
 			const u8 *addr, u32 iv32, u16 *phase1key);
 
 int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
+void iwl_add_bcast_station(struct iwl_priv *priv);
 int iwl_remove_station(struct iwl_priv *priv, const u8 *addr, bool is_ap);
 void iwl_clear_stations_table(struct iwl_priv *priv);
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv);
@@ -65,5 +66,6 @@
 int iwl_sta_rx_agg_start(struct iwl_priv *priv,
 			 const u8 *addr, int tid, u16 ssn);
 int iwl_sta_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid);
-void iwl_update_ps_mode(struct iwl_priv *priv, u16 ps_bit, u8 *addr);
+void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id);
+void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt);
 #endif /* __iwl_sta_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index fb9bcfa..58b132f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -97,7 +97,8 @@
 		reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
 
 		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
-			IWL_DEBUG_INFO(priv, "Requesting wakeup, GP1 = 0x%x\n", reg);
+			IWL_DEBUG_INFO(priv, "Tx queue %d requesting wakeup, GP1 = 0x%x\n",
+				      txq_id, reg);
 			iwl_set_bit(priv, CSR_GP_CNTRL,
 				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 			return ret;
@@ -132,7 +133,7 @@
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
 	struct pci_dev *dev = priv->pci_dev;
-	int i, len;
+	int i;
 
 	if (q->n_bd == 0)
 		return;
@@ -142,8 +143,6 @@
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
 		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
 
-	len = sizeof(struct iwl_device_cmd) * q->n_window;
-
 	/* De-alloc array of command/tx buffers */
 	for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
 		kfree(txq->cmd[i]);
@@ -181,14 +180,11 @@
 	struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
 	struct iwl_queue *q = &txq->q;
 	struct pci_dev *dev = priv->pci_dev;
-	int i, len;
+	int i;
 
 	if (q->n_bd == 0)
 		return;
 
-	len = sizeof(struct iwl_device_cmd) * q->n_window;
-	len += IWL_MAX_SCAN_SIZE;
-
 	/* De-alloc array of command/tx buffers */
 	for (i = 0; i <= TFD_CMD_SLOTS; i++)
 		kfree(txq->cmd[i]);
@@ -370,8 +366,13 @@
 
 	txq->need_update = 0;
 
-	/* aggregation TX queues will get their ID when aggregation begins */
-	if (txq_id <= IWL_TX_FIFO_AC3)
+	/*
+	 * Aggregation TX queues will get their ID when aggregation begins;
+	 * they overwrite the setting done here. The command FIFO doesn't
+	 * need an swq_id so don't set one to catch errors, all others can
+	 * be set up to the identity mapping.
+	 */
+	if (txq_id != IWL_CMD_QUEUE_NUM)
 		txq->swq_id = txq_id;
 
 	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
@@ -406,15 +407,19 @@
 	int txq_id;
 
 	/* Tx queues */
-	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
-		if (txq_id == IWL_CMD_QUEUE_NUM)
-			iwl_cmd_queue_free(priv);
-		else
-			iwl_tx_queue_free(priv, txq_id);
-
+	if (priv->txq)
+		for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
+		     txq_id++)
+			if (txq_id == IWL_CMD_QUEUE_NUM)
+				iwl_cmd_queue_free(priv);
+			else
+				iwl_tx_queue_free(priv, txq_id);
 	iwl_free_dma_ptr(priv, &priv->kw);
 
 	iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
+
+	/* free tx queue structure */
+	iwl_free_txq_mem(priv);
 }
 EXPORT_SYMBOL(iwl_hw_txq_ctx_free);
 
@@ -446,6 +451,12 @@
 		IWL_ERR(priv, "Keep Warm allocation failed\n");
 		goto error_kw;
 	}
+
+	/* allocate tx queue structure */
+	ret = iwl_alloc_txq_mem(priv);
+	if (ret)
+		goto error;
+
 	spin_lock_irqsave(&priv->lock, flags);
 
 	/* Turn off all Tx DMA fifos */
@@ -582,9 +593,7 @@
 	u8 rate_plcp;
 
 	/* Set retry limit on DATA packets and Probe Responses*/
-	if (priv->data_retry_limit != -1)
-		data_retry_limit = priv->data_retry_limit;
-	else if (ieee80211_is_probe_resp(fc))
+	if (ieee80211_is_probe_resp(fc))
 		data_retry_limit = 3;
 	else
 		data_retry_limit = IWL_DEFAULT_TX_RETRY;
@@ -701,6 +710,8 @@
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_sta *sta = info->control.sta;
+	struct iwl_station_priv *sta_priv = NULL;
 	struct iwl_tx_queue *txq;
 	struct iwl_queue *q;
 	struct iwl_device_cmd *out_cmd;
@@ -710,7 +721,7 @@
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	dma_addr_t scratch_phys;
-	u16 len, len_org;
+	u16 len, len_org, firstlen, secondlen;
 	u16 seq_number = 0;
 	__le16 fc;
 	u8 hdr_len;
@@ -763,6 +774,24 @@
 
 	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
 
+	if (sta)
+		sta_priv = (void *)sta->drv_priv;
+
+	if (sta_priv && sta_id != priv->hw_params.bcast_sta_id &&
+	    sta_priv->asleep) {
+		WARN_ON(!(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE));
+		/*
+		 * This sends an asynchronous command to the device,
+		 * but we can rely on it being processed before the
+		 * next frame is processed -- and the next frame to
+		 * this station is the one that will consume this
+		 * counter.
+		 * For now set the counter to just 1 since we do not
+		 * support uAPSD yet.
+		 */
+		iwl_sta_modify_sleep_tx_count(priv, sta_id, 1);
+	}
+
 	txq_id = skb_get_queue_mapping(skb);
 	if (ieee80211_is_data_qos(fc)) {
 		qc = ieee80211_get_qos_ctl(hdr);
@@ -843,7 +872,7 @@
 		sizeof(struct iwl_cmd_header) + hdr_len;
 
 	len_org = len;
-	len = (len + 3) & ~3;
+	firstlen = len = (len + 3) & ~3;
 
 	if (len_org != len)
 		len_org = 1;
@@ -877,7 +906,7 @@
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
 	 * if any (802.11 null frames have no payload). */
-	len = skb->len - hdr_len;
+	secondlen = len = skb->len - hdr_len;
 	if (len) {
 		phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
 					   len, PCI_DMA_TODEVICE);
@@ -911,11 +940,28 @@
 	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
 				       len, PCI_DMA_BIDIRECTIONAL);
 
+	trace_iwlwifi_dev_tx(priv,
+			     &((struct iwl_tfd *)txq->tfds)[txq->q.write_ptr],
+			     sizeof(struct iwl_tfd),
+			     &out_cmd->hdr, firstlen,
+			     skb->data + hdr_len, secondlen);
+
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
 	ret = iwl_txq_update_write_ptr(priv, txq);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	/*
+	 * At this point the frame is "transmitted" successfully
+	 * and we will get a TX status notification eventually,
+	 * regardless of the value of ret. "ret" only indicates
+	 * whether or not we should update the write pointer.
+	 */
+
+	/* avoid atomic ops if it isn't an associated client */
+	if (sta_priv && sta_priv->client)
+		atomic_inc(&sta_priv->pending_frames);
+
 	if (ret)
 		return ret;
 
@@ -970,13 +1016,20 @@
 	BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
 	       !(cmd->flags & CMD_SIZE_HUGE));
 
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_INFO(priv, "Not sending command - RF KILL\n");
+	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
+		IWL_WARN(priv, "Not sending command - %s KILL\n",
+			 iwl_is_rfkill(priv) ? "RF" : "CT");
 		return -EIO;
 	}
 
 	if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
-		IWL_ERR(priv, "No space for Tx\n");
+		IWL_ERR(priv, "No space in command queue\n");
+		if (iwl_within_ct_kill_margin(priv))
+			iwl_tt_enter_ct_kill(priv);
+		else {
+			IWL_ERR(priv, "Restarting adapter due to queue full\n");
+			queue_work(priv->workqueue, &priv->restart);
+		}
 		return -ENOSPC;
 	}
 
@@ -1039,6 +1092,8 @@
 	pci_unmap_addr_set(out_meta, mapping, phys_addr);
 	pci_unmap_len_set(out_meta, len, fix_size);
 
+	trace_iwlwifi_dev_hcmd(priv, &out_cmd->hdr, fix_size, cmd->flags);
+
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
 						   phys_addr, fix_size, 1,
 						   U32_PAD(cmd->len));
@@ -1051,6 +1106,24 @@
 	return ret ? ret : idx;
 }
 
+static void iwl_tx_status(struct iwl_priv *priv, struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ieee80211_sta *sta;
+	struct iwl_station_priv *sta_priv;
+
+	sta = ieee80211_find_sta(priv->vif, hdr->addr1);
+	if (sta) {
+		sta_priv = (void *)sta->drv_priv;
+		/* avoid atomic ops if this isn't a client */
+		if (sta_priv->client &&
+		    atomic_dec_return(&sta_priv->pending_frames) == 0)
+			ieee80211_sta_block_awake(priv->hw, sta, false);
+	}
+
+	ieee80211_tx_status_irqsafe(priv->hw, skb);
+}
+
 int iwl_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 {
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
@@ -1070,7 +1143,7 @@
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 
 		tx_info = &txq->txb[txq->q.read_ptr];
-		ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb[0]);
+		iwl_tx_status(priv, tx_info->skb[0]);
 		tx_info->skb[0] = NULL;
 
 		if (priv->cfg->ops->lib->txq_inval_byte_cnt_tbl)
@@ -1105,11 +1178,6 @@
 		return;
 	}
 
-	pci_unmap_single(priv->pci_dev,
-		pci_unmap_addr(&txq->meta[cmd_idx], mapping),
-		pci_unmap_len(&txq->meta[cmd_idx], len),
-		PCI_DMA_BIDIRECTIONAL);
-
 	for (idx = iwl_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 
@@ -1132,7 +1200,7 @@
  */
 void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -1157,12 +1225,17 @@
 	cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
 	meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index];
 
+	pci_unmap_single(priv->pci_dev,
+			 pci_unmap_addr(meta, mapping),
+			 pci_unmap_len(meta, len),
+			 PCI_DMA_BIDIRECTIONAL);
+
 	/* Input error checking is done when commands are added to queue. */
 	if (meta->flags & CMD_WANT_SKB) {
-		meta->source->reply_skb = rxb->skb;
-		rxb->skb = NULL;
+		meta->source->reply_page = (unsigned long)rxb_addr(rxb);
+		rxb->page = NULL;
 	} else if (meta->callback)
-		meta->callback(priv, cmd, rxb->skb);
+		meta->callback(priv, cmd, pkt);
 
 	iwl_hcmd_queue_reclaim(priv, txq_id, index, cmd_index);
 
@@ -1240,7 +1313,7 @@
 	if (tid_data->tfds_in_queue == 0) {
 		IWL_DEBUG_HT(priv, "HW queue is empty\n");
 		tid_data->agg.state = IWL_AGG_ON;
-		ieee80211_start_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+		ieee80211_start_tx_ba_cb_irqsafe(priv->vif, ra, tid);
 	} else {
 		IWL_DEBUG_HT(priv, "HW queue is NOT empty: %d packets in HW queue\n",
 			     tid_data->tfds_in_queue);
@@ -1277,8 +1350,16 @@
 		return -ENXIO;
 	}
 
+	if (priv->stations[sta_id].tid[tid].agg.state ==
+				IWL_EMPTYING_HW_QUEUE_ADDBA) {
+		IWL_DEBUG_HT(priv, "AGG stop before setup done\n");
+		ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+		priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF;
+		return 0;
+	}
+
 	if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON)
-		IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n");
+		IWL_WARN(priv, "Stopping AGG while state not ON or starting\n");
 
 	tid_data = &priv->stations[sta_id].tid[tid];
 	ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
@@ -1305,7 +1386,7 @@
 	if (ret)
 		return ret;
 
-	ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid);
+	ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, ra, tid);
 
 	return 0;
 }
@@ -1329,7 +1410,7 @@
 			priv->cfg->ops->lib->txq_agg_disable(priv, txq_id,
 							     ssn, tx_fifo);
 			tid_data->agg.state = IWL_AGG_OFF;
-			ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, addr, tid);
+			ieee80211_stop_tx_ba_cb_irqsafe(priv->vif, addr, tid);
 		}
 		break;
 	case IWL_EMPTYING_HW_QUEUE_ADDBA:
@@ -1337,7 +1418,7 @@
 		if (tid_data->tfds_in_queue == 0) {
 			IWL_DEBUG_HT(priv, "HW queue empty: continue ADDBA flow\n");
 			tid_data->agg.state = IWL_AGG_ON;
-			ieee80211_start_tx_ba_cb_irqsafe(priv->hw, addr, tid);
+			ieee80211_start_tx_ba_cb_irqsafe(priv->vif, addr, tid);
 		}
 		break;
 	}
@@ -1401,7 +1482,7 @@
 
 	info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb[0]);
 	memset(&info->status, 0, sizeof(info->status));
-	info->flags = IEEE80211_TX_STAT_ACK;
+	info->flags |= IEEE80211_TX_STAT_ACK;
 	info->flags |= IEEE80211_TX_STAT_AMPDU;
 	info->status.ampdu_ack_map = successes;
 	info->status.ampdu_ack_len = agg->frame_count;
@@ -1421,7 +1502,7 @@
 void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 					   struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
 	struct iwl_tx_queue *txq = NULL;
 	struct iwl_ht_agg *agg;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index d00a803..2a28a1f 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -42,7 +42,6 @@
 #include <linux/if_arp.h>
 
 #include <net/ieee80211_radiotap.h>
-#include <net/lib80211.h>
 #include <net/mac80211.h>
 
 #include <asm/div64.h>
@@ -77,11 +76,9 @@
 #define VS
 #endif
 
-#define IWL39_VERSION "1.2.26k" VD VS
+#define DRV_VERSION  IWLWIFI_VERSION VD VS
 #define DRV_COPYRIGHT	"Copyright(c) 2003-2009 Intel Corporation"
 #define DRV_AUTHOR     "<ilw@linux.intel.com>"
-#define DRV_VERSION     IWL39_VERSION
-
 
 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 MODULE_VERSION(DRV_VERSION);
@@ -90,7 +87,6 @@
 
  /* module parameters */
 struct iwl_mod_params iwl3945_mod_params = {
-	.num_of_queues = IWL39_NUM_QUEUES, /* Not used */
 	.sw_crypto = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
@@ -368,13 +364,13 @@
 				      struct sk_buff *skb_frag,
 				      int sta_id)
 {
-	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
 	struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
 
 	switch (keyinfo->alg) {
 	case ALG_CCMP:
-		tx->sec_ctl = TX_CMD_SEC_CCM;
-		memcpy(tx->key, keyinfo->key, keyinfo->keylen);
+		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
 		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
 		break;
 
@@ -382,13 +378,13 @@
 		break;
 
 	case ALG_WEP:
-		tx->sec_ctl = TX_CMD_SEC_WEP |
+		tx_cmd->sec_ctl = TX_CMD_SEC_WEP |
 		    (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
 
 		if (keyinfo->keylen == 13)
-			tx->sec_ctl |= TX_CMD_SEC_KEY128;
+			tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
 
-		memcpy(&tx->key[3], keyinfo->key, keyinfo->keylen);
+		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
 
 		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
 			     "with key %d\n", info->control.hw_key->hw_key_idx);
@@ -408,12 +404,11 @@
 				  struct ieee80211_tx_info *info,
 				  struct ieee80211_hdr *hdr, u8 std_id)
 {
-	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-	__le32 tx_flags = tx->tx_flags;
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	__le32 tx_flags = tx_cmd->tx_flags;
 	__le16 fc = hdr->frame_control;
-	u8 rc_flags = info->control.rates[0].flags;
 
-	tx->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 		tx_flags |= TX_CMD_FLG_ACK_MSK;
 		if (ieee80211_is_mgmt(fc))
@@ -426,25 +421,19 @@
 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 	}
 
-	tx->sta_id = std_id;
+	tx_cmd->sta_id = std_id;
 	if (ieee80211_has_morefrags(fc))
 		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
 
 	if (ieee80211_is_data_qos(fc)) {
 		u8 *qc = ieee80211_get_qos_ctl(hdr);
-		tx->tid_tspec = qc[0] & 0xf;
+		tx_cmd->tid_tspec = qc[0] & 0xf;
 		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
 	} else {
 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 	}
 
-	if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		tx_flags |= TX_CMD_FLG_RTS_MSK;
-		tx_flags &= ~TX_CMD_FLG_CTS_MSK;
-	} else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-		tx_flags |= TX_CMD_FLG_CTS_MSK;
-	}
+	priv->cfg->ops->utils->rts_tx_cmd_flag(info, &tx_flags);
 
 	if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
 		tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
@@ -452,19 +441,16 @@
 	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
 	if (ieee80211_is_mgmt(fc)) {
 		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
-			tx->timeout.pm_frame_timeout = cpu_to_le16(3);
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
 		else
-			tx->timeout.pm_frame_timeout = cpu_to_le16(2);
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
 	} else {
-		tx->timeout.pm_frame_timeout = 0;
-#ifdef CONFIG_IWLWIFI_LEDS
-		priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
-#endif
+		tx_cmd->timeout.pm_frame_timeout = 0;
 	}
 
-	tx->driver_txop = 0;
-	tx->tx_flags = tx_flags;
-	tx->next_frame_len = 0;
+	tx_cmd->driver_txop = 0;
+	tx_cmd->tx_flags = tx_flags;
+	tx_cmd->next_frame_len = 0;
 }
 
 /*
@@ -474,7 +460,7 @@
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct iwl3945_tx_cmd *tx;
+	struct iwl3945_tx_cmd *tx_cmd;
 	struct iwl_tx_queue *txq = NULL;
 	struct iwl_queue *q = NULL;
 	struct iwl_device_cmd *out_cmd;
@@ -573,9 +559,9 @@
 	/* Init first empty entry in queue's array of Tx/cmd buffers */
 	out_cmd = txq->cmd[idx];
 	out_meta = &txq->meta[idx];
-	tx = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
+	tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
-	memset(tx, 0, sizeof(*tx));
+	memset(tx_cmd, 0, sizeof(*tx_cmd));
 
 	/*
 	 * Set up the Tx-command (not MAC!) header.
@@ -588,7 +574,7 @@
 				INDEX_TO_SEQ(q->write_ptr)));
 
 	/* Copy MAC header from skb into command buffer */
-	memcpy(tx->hdr, hdr, hdr_len);
+	memcpy(tx_cmd->hdr, hdr, hdr_len);
 
 
 	if (info->control.hw_key)
@@ -602,12 +588,12 @@
 
 	/* Total # bytes to be transmitted */
 	len = (u16)skb->len;
-	tx->len = cpu_to_le16(len);
+	tx_cmd->len = cpu_to_le16(len);
 
 	iwl_dbg_log_tx_data_frame(priv, len, hdr);
 	iwl_update_stats(priv, true, fc, len);
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
 
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
@@ -620,9 +606,9 @@
 
 	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
 		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
-	iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
-	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
+	iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
+	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
 			   ieee80211_hdrlen(fc));
 
 	/*
@@ -758,7 +744,7 @@
 			       u8 type)
 {
 	struct iwl_spectrum_cmd spectrum;
-	struct iwl_rx_packet *res;
+	struct iwl_rx_packet *pkt;
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
 		.data = (void *)&spectrum,
@@ -803,18 +789,18 @@
 	if (rc)
 		return rc;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
 		rc = -EIO;
 	}
 
-	spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
+	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
 	switch (spectrum_resp_status) {
 	case 0:		/* Command will be handled */
-		if (res->u.spectrum.id != 0xff) {
+		if (pkt->u.spectrum.id != 0xff) {
 			IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
-						res->u.spectrum.id);
+						pkt->u.spectrum.id);
 			priv->measurement_status &= ~MEASUREMENT_READY;
 		}
 		priv->measurement_status |= MEASUREMENT_ACTIVE;
@@ -826,7 +812,7 @@
 		break;
 	}
 
-	dev_kfree_skb_any(cmd.reply_skb);
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return rc;
 }
@@ -835,7 +821,7 @@
 static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
 			       struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_alive_resp *palive;
 	struct delayed_work *pwork;
 
@@ -872,7 +858,7 @@
 				 struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 #endif
 
 	IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
@@ -908,7 +894,7 @@
 				struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
 	u8 rate = beacon->beacon_notify_hdr.rate;
 
@@ -931,7 +917,7 @@
 static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
@@ -1095,7 +1081,7 @@
 		list_del(element);
 
 		/* Point to Rx buffer via next RBD in circular buffer */
-		rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->real_dma_addr);
+		rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma);
 		rxq->queue[rxq->write] = rxb;
 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 		rxq->free_count--;
@@ -1135,8 +1121,9 @@
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
-	struct sk_buff *skb;
+	struct page *page;
 	unsigned long flags;
+	gfp_t gfp_mask = priority;
 
 	while (1) {
 		spin_lock_irqsave(&rxq->lock, flags);
@@ -1148,10 +1135,14 @@
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		if (rxq->free_count > RX_LOW_WATERMARK)
-			priority |= __GFP_NOWARN;
+			gfp_mask |= __GFP_NOWARN;
+
+		if (priv->hw_params.rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
 		/* Alloc a new receive buffer */
-		skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
-		if (!skb) {
+		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+		if (!page) {
 			if (net_ratelimit())
 				IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
 			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
@@ -1168,7 +1159,7 @@
 		spin_lock_irqsave(&rxq->lock, flags);
 		if (list_empty(&rxq->rx_used)) {
 			spin_unlock_irqrestore(&rxq->lock, flags);
-			dev_kfree_skb_any(skb);
+			__free_pages(page, priv->hw_params.rx_page_order);
 			return;
 		}
 		element = rxq->rx_used.next;
@@ -1176,26 +1167,18 @@
 		list_del(element);
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
-		rxb->skb = skb;
-
-		/* If radiotap head is required, reserve some headroom here.
-		 * The physical head count is a variable rx_stats->phy_count.
-		 * We reserve 4 bytes here. Plus these extra bytes, the
-		 * headroom of the physical head should be enough for the
-		 * radiotap head that iwl3945 supported. See iwl3945_rt.
-		 */
-		skb_reserve(rxb->skb, 4);
-
+		rxb->page = page;
 		/* Get physical address of RB/SKB */
-		rxb->real_dma_addr = pci_map_single(priv->pci_dev,
-						rxb->skb->data,
-						priv->hw_params.rx_buf_size,
-						PCI_DMA_FROMDEVICE);
+		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
 
 		spin_lock_irqsave(&rxq->lock, flags);
+
 		list_add_tail(&rxb->list, &rxq->rx_free);
-		priv->alloc_rxb_skb++;
 		rxq->free_count++;
+		priv->alloc_rxb_page++;
+
 		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
 }
@@ -1211,14 +1194,14 @@
 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 		/* In the reset function, these buffers may have been allocated
 		 * to an SKB, so we need to unmap and free potential storage */
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size,
-					 PCI_DMA_FROMDEVICE);
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb(rxq->pool[i].skb);
-			rxq->pool[i].skb = NULL;
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			priv->alloc_rxb_page--;
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
 		}
 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
 	}
@@ -1226,8 +1209,8 @@
 	/* Set us so that we have processed and used all buffers, but have
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
-	rxq->free_count = 0;
 	rxq->write_actual = 0;
+	rxq->free_count = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
@@ -1260,12 +1243,14 @@
 {
 	int i;
 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size,
-					 PCI_DMA_FROMDEVICE);
-			dev_kfree_skb(rxq->pool[i].skb);
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
+			priv->alloc_rxb_page--;
 		}
 	}
 
@@ -1381,7 +1366,7 @@
 	i = rxq->read;
 
 	/* calculate total frames need to be restock after handling RX */
-	total_empty = r - priv->rxq.write_actual;
+	total_empty = r - rxq->write_actual;
 	if (total_empty < 0)
 		total_empty += RX_QUEUE_SIZE;
 
@@ -1401,10 +1386,13 @@
 
 		rxq->queue[i] = NULL;
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				priv->hw_params.rx_buf_size,
-				PCI_DMA_FROMDEVICE);
-		pkt = (struct iwl_rx_packet *)rxb->skb->data;
+		pci_unmap_page(priv->pci_dev, rxb->page_dma,
+			       PAGE_SIZE << priv->hw_params.rx_page_order,
+			       PCI_DMA_FROMDEVICE);
+		pkt = rxb_addr(rxb);
+
+		trace_iwlwifi_dev_rx(priv, pkt,
+			le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
 		/* Reclaim a command buffer only if this packet is a response
 		 *   to a (driver-originated) command.
@@ -1422,44 +1410,55 @@
 		if (priv->rx_handlers[pkt->hdr.cmd]) {
 			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
 				get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 		} else {
 			/* No handling needed */
-			IWL_DEBUG_RX(priv, "r %d i %d No handler needed for %s, 0x%02x\n",
+			IWL_DEBUG_RX(priv,
+				"r %d i %d No handler needed for %s, 0x%02x\n",
 				r, i, get_cmd_string(pkt->hdr.cmd),
 				pkt->hdr.cmd);
 		}
 
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some rx_handler might have
+		 * already taken or freed the pages.
+		 */
+
 		if (reclaim) {
-			/* Invoke any callbacks, transfer the skb to caller, and
-			 * fire off the (possibly) blocking iwl_send_cmd()
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking iwl_send_cmd()
 			 * as we reclaim the driver command queue */
-			if (rxb && rxb->skb)
+			if (rxb->page)
 				iwl_tx_cmd_complete(priv, rxb);
 			else
 				IWL_WARN(priv, "Claim null rxb?\n");
 		}
 
-		/* For now we just don't re-use anything.  We can tweak this
-		 * later to try and re-use notification packets and SKBs that
-		 * fail to Rx correctly */
-		if (rxb->skb != NULL) {
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb_any(rxb->skb);
-			rxb->skb = NULL;
-		}
-
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
 		spin_lock_irqsave(&rxq->lock, flags);
-		list_add_tail(&rxb->list, &priv->rxq.rx_used);
+		if (rxb->page != NULL) {
+			rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
+				0, PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
 		spin_unlock_irqrestore(&rxq->lock, flags);
+
 		i = (i + 1) & RX_QUEUE_MASK;
 		/* If there are a lot of unused frames,
 		 * restock the Rx queue so ucode won't assert. */
 		if (fill_rx) {
 			count++;
 			if (count >= 8) {
-				priv->rxq.read = i;
+				rxq->read = i;
 				iwl3945_rx_replenish_now(priv);
 				count = 0;
 			}
@@ -1467,7 +1466,7 @@
 	}
 
 	/* Backtrack one entry */
-	priv->rxq.read = i;
+	rxq->read = i;
 	if (fill_rx)
 		iwl3945_rx_replenish_now(priv);
 	else
@@ -1482,7 +1481,6 @@
 	tasklet_kill(&priv->irq_tasklet);
 }
 
-#ifdef CONFIG_IWLWIFI_DEBUG
 static const char *desc_lookup(int i)
 {
 	switch (i) {
@@ -1551,8 +1549,9 @@
 			"%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
 			desc_lookup(desc), desc, time, blink1, blink2,
 			ilink1, ilink2, data1);
+		trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0,
+					0, blink1, blink2, ilink1, ilink2);
 	}
-
 }
 
 #define EVENT_START_OFFSET  (6 * sizeof(u32))
@@ -1569,6 +1568,7 @@
 	u32 event_size;	/* 2 u32s, or 3 u32s if timestamp recorded */
 	u32 ptr;        /* SRAM byte address of log data */
 	u32 ev, time, data; /* event log data */
+	unsigned long reg_flags;
 
 	if (num_events == 0)
 		return;
@@ -1582,25 +1582,71 @@
 
 	ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
 
+	/* Make sure device is powered up for SRAM reads */
+	spin_lock_irqsave(&priv->reg_lock, reg_flags);
+	iwl_grab_nic_access(priv);
+
+	/* Set starting address; reads will auto-increment */
+	_iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, ptr);
+	rmb();
+
 	/* "time" is actually "data" for mode 0 (no timestamp).
 	 * place event id # at far right for easier visual parsing. */
 	for (i = 0; i < num_events; i++) {
-		ev = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
-		time = iwl_read_targ_mem(priv, ptr);
-		ptr += sizeof(u32);
+		ev = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
+		time = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 		if (mode == 0) {
 			/* data, ev */
 			IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
+			trace_iwlwifi_dev_ucode_event(priv, 0, time, ev);
 		} else {
-			data = iwl_read_targ_mem(priv, ptr);
-			ptr += sizeof(u32);
+			data = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
 			IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", time, data, ev);
+			trace_iwlwifi_dev_ucode_event(priv, time, data, ev);
 		}
 	}
+
+	/* Allow device to power down */
+	iwl_release_nic_access(priv);
+	spin_unlock_irqrestore(&priv->reg_lock, reg_flags);
+}
+
+/**
+ * iwl3945_print_last_event_logs - Dump the newest # of event log to syslog
+ */
+static void iwl3945_print_last_event_logs(struct iwl_priv *priv, u32 capacity,
+				      u32 num_wraps, u32 next_entry,
+				      u32 size, u32 mode)
+{
+	/*
+	 * display the newest DEFAULT_LOG_ENTRIES entries
+	 * i.e the entries just before the next ont that uCode would fill.
+	 */
+	if (num_wraps) {
+		if (next_entry < size) {
+			iwl3945_print_event_log(priv,
+					capacity - (size - next_entry),
+					size - next_entry, mode);
+			iwl3945_print_event_log(priv, 0,
+				    next_entry, mode);
+		} else
+			iwl3945_print_event_log(priv, next_entry - size,
+				    size, mode);
+	} else {
+		if (next_entry < size)
+			iwl3945_print_event_log(priv, 0, next_entry, mode);
+		else
+			iwl3945_print_event_log(priv, next_entry - size,
+					    size, mode);
+	}
 }
 
-void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
+/* For sanity check only.  Actual size is determined by uCode, typ. 512 */
+#define IWL3945_MAX_EVENT_LOG_SIZE (512)
+
+#define DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES (20)
+
+void iwl3945_dump_nic_event_log(struct iwl_priv *priv, bool full_log)
 {
 	u32 base;       /* SRAM byte address of event log header */
 	u32 capacity;   /* event log capacity in # entries */
@@ -1621,6 +1667,18 @@
 	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
 	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
 
+	if (capacity > IWL3945_MAX_EVENT_LOG_SIZE) {
+		IWL_ERR(priv, "Log capacity %d is bogus, limit to %d entries\n",
+			capacity, IWL3945_MAX_EVENT_LOG_SIZE);
+		capacity = IWL3945_MAX_EVENT_LOG_SIZE;
+	}
+
+	if (next_entry > IWL3945_MAX_EVENT_LOG_SIZE) {
+		IWL_ERR(priv, "Log write index %d is bogus, limit to %d\n",
+			next_entry, IWL3945_MAX_EVENT_LOG_SIZE);
+		next_entry = IWL3945_MAX_EVENT_LOG_SIZE;
+	}
+
 	size = num_wraps ? capacity : next_entry;
 
 	/* bail out if nothing in log */
@@ -1629,30 +1687,40 @@
 		return;
 	}
 
-	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
-		  size, num_wraps);
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if (!(iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS))
+		size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
+			? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
+#else
+	size = (size > DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES)
+		? DEFAULT_IWL3945_DUMP_EVENT_LOG_ENTRIES : size;
+#endif
 
-	/* if uCode has wrapped back to top of log, start at the oldest entry,
-	 * i.e the next one that uCode would fill. */
-	if (num_wraps)
-		iwl3945_print_event_log(priv, next_entry,
+	IWL_ERR(priv, "Start IWL Event Log Dump: display last %d count\n",
+		  size);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+	if ((iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) || full_log) {
+		/* if uCode has wrapped back to top of log,
+		 * start at the oldest entry,
+		 * i.e the next one that uCode would fill.
+		 */
+		if (num_wraps)
+			iwl3945_print_event_log(priv, next_entry,
 				    capacity - next_entry, mode);
 
-	/* (then/else) start at top of log */
-	iwl3945_print_event_log(priv, 0, next_entry, mode);
-
-}
+		/* (then/else) start at top of log */
+		iwl3945_print_event_log(priv, 0, next_entry, mode);
+	} else
+		iwl3945_print_last_event_logs(priv, capacity, num_wraps,
+					next_entry, size, mode);
 #else
-void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
-{
-}
-
-void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
-{
-}
-
+	iwl3945_print_last_event_logs(priv, capacity, num_wraps,
+				next_entry, size, mode);
 #endif
 
+}
+
 static void iwl3945_irq_tasklet(struct iwl_priv *priv)
 {
 	u32 inta, handled = 0;
@@ -1685,6 +1753,8 @@
 	}
 #endif
 
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
 	 * atomic, make sure that inta covers all the interrupts that
 	 * we've discovered, even if FH interrupt came in just after
@@ -1706,8 +1776,6 @@
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
-		spin_unlock_irqrestore(&priv->lock, flags);
-
 		return;
 	}
 
@@ -1799,7 +1867,6 @@
 			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
 	}
 #endif
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
@@ -2158,6 +2225,14 @@
 		IWL_UCODE_API(priv->ucode_ver),
 		IWL_UCODE_SERIAL(priv->ucode_ver));
 
+	snprintf(priv->hw->wiphy->fw_version,
+		 sizeof(priv->hw->wiphy->fw_version),
+		 "%u.%u.%u.%u",
+		 IWL_UCODE_MAJOR(priv->ucode_ver),
+		 IWL_UCODE_MINOR(priv->ucode_ver),
+		 IWL_UCODE_API(priv->ucode_ver),
+		 IWL_UCODE_SERIAL(priv->ucode_ver));
+
 	IWL_DEBUG_INFO(priv, "f/w package hdr ucode version raw = 0x%x\n",
 		       priv->ucode_ver);
 	IWL_DEBUG_INFO(priv, "f/w package hdr runtime inst size = %u\n",
@@ -2458,7 +2533,7 @@
 	priv->active_rate = priv->rates_mask;
 	priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
 
-	iwl_power_update_mode(priv, false);
+	iwl_power_update_mode(priv, true);
 
 	if (iwl_is_associated(priv)) {
 		struct iwl3945_rxon_cmd *active_rxon =
@@ -2479,7 +2554,7 @@
 
 	iwl3945_reg_txpower_periodic(priv);
 
-	iwl3945_led_register(priv);
+	iwl_leds_init(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
 	set_bit(STATUS_READY, &priv->status);
@@ -2517,7 +2592,6 @@
 	if (!exit_pending)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
 
-	iwl3945_led_unregister(priv);
 	iwl_clear_stations_table(priv);
 
 	/* Unblock any waiting calls */
@@ -2563,23 +2637,15 @@
 			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 				STATUS_EXIT_PENDING;
 
-	priv->cfg->ops->lib->apm_ops.reset(priv);
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	iwl3945_hw_txq_ctx_stop(priv);
 	iwl3945_hw_rxq_stop(priv);
 
-	iwl_write_prph(priv, APMG_CLK_DIS_REG,
-				APMG_CLK_VAL_DMA_CLK_RQT);
-
+	/* Power-down device's busmaster DMA clocks */
+	iwl_write_prph(priv, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
 	udelay(5);
 
-	if (exit_pending)
-		priv->cfg->ops->lib->apm_ops.stop(priv);
-	else
-		priv->cfg->ops->lib->apm_ops.reset(priv);
+	/* Stop the device, and put it in low power state */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
 
  exit:
 	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
@@ -2724,19 +2790,34 @@
 	mutex_unlock(&priv->mutex);
 }
 
+/*
+ * 3945 cannot interrupt driver when hardware rf kill switch toggles;
+ * driver must poll CSR_GP_CNTRL_REG register for change.  This register
+ * *is* readable even when device has been SW_RESET into low power mode
+ * (e.g. during RF KILL).
+ */
 static void iwl3945_rfkill_poll(struct work_struct *data)
 {
 	struct iwl_priv *priv =
 	    container_of(data, struct iwl_priv, rfkill_poll.work);
+	bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status);
+	bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL)
+			& CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
 
-	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	if (new_rfkill != old_rfkill) {
+		if (new_rfkill)
+			set_bit(STATUS_RF_KILL_HW, &priv->status);
+		else
+			clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	wiphy_rfkill_set_hw_state(priv->hw->wiphy,
-			test_bit(STATUS_RF_KILL_HW, &priv->status));
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill);
 
+		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+				new_rfkill ? "disable radio" : "enable radio");
+	}
+
+	/* Keep this running, even if radio now enabled.  This will be
+	 * cancelled in mac_start() if system decides to start again */
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
 			   round_jiffies_relative(2 * HZ));
 
@@ -3152,6 +3233,8 @@
 	 * no need to poll the killswitch state anymore */
 	cancel_delayed_work(&priv->rfkill_poll);
 
+	iwl_led_start(priv);
+
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
@@ -3606,7 +3689,7 @@
 		return -EAGAIN;
 
 	mutex_lock(&priv->mutex);
-	rc = iwl_send_statistics_request(priv, 0);
+	rc = iwl_send_statistics_request(priv, CMD_SYNC, false);
 	mutex_unlock(&priv->mutex);
 
 	if (rc) {
@@ -3795,7 +3878,6 @@
 	/* Clear the driver's (not device's) station table */
 	iwl_clear_stations_table(priv);
 
-	priv->data_retry_limit = -1;
 	priv->ieee_channels = NULL;
 	priv->ieee_rates = NULL;
 	priv->band = IEEE80211_BAND_2GHZ;
@@ -3862,10 +3944,8 @@
 		BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC);
 
-	hw->wiphy->custom_regulatory = true;
-
-	/* Firmware does not support this */
-	hw->wiphy->disable_beacon_hints = true;
+	hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+			    WIPHY_FLAG_DISABLE_BEACON_HINTS;
 
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
 	/* we create the 802.11 header and a zero-length SSID element */
@@ -3982,13 +4062,6 @@
 	 */
 	spin_lock_init(&priv->reg_lock);
 
-	/* amp init */
-	err = priv->cfg->ops->lib->apm_ops.init(priv);
-	if (err < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out_iounmap;
-	}
-
 	/***********************
 	 * 4. Read EEPROM
 	 * ********************/
@@ -4054,6 +4127,7 @@
 			     &priv->bands[IEEE80211_BAND_2GHZ].channels[5]);
 	iwl3945_setup_deferred_work(priv);
 	iwl3945_setup_rx_handlers(priv);
+	iwl_power_initialize(priv);
 
 	/*********************************
 	 * 8. Setup and Register mac80211
@@ -4124,6 +4198,15 @@
 		iwl3945_down(priv);
 	}
 
+	/*
+	 * Make sure device is reset to low power before unloading driver.
+	 * This may be redundant with iwl_down(), but there are paths to
+	 * run iwl_down() without calling apm_ops.stop(), and there are
+	 * paths to avoid running iwl_down() at all before leaving driver.
+	 * This (inexpensive) call *makes sure* device is reset.
+	 */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
 	/* make sure we flush any pending irq or
 	 * tasklet for the driver
 	 */
@@ -4226,18 +4309,19 @@
 
 MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
 
-module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
+module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
+module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO);
 MODULE_PARM_DESC(swcrypto,
 		 "using software crypto (default 1 [software])\n");
 #ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwl_debug_level, uint, 0644);
+module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
 #endif
-module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, 0444);
+module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
+		   int, S_IRUGO);
 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
-module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, 0444);
+module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
 
 module_exit(iwl3945_exit);
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index c25a043..b9d34a7 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -1,8 +1,9 @@
 config IWM
 	tristate "Intel Wireless Multicomm 3200 WiFi driver"
-	depends on MMC && WLAN_80211 && EXPERIMENTAL
+	depends on MMC && EXPERIMENTAL
 	depends on CFG80211
 	select FW_LOADER
+	select IWMC3200TOP
 	help
 	  The Intel Wireless Multicomm 3200 hardware is a combo
 	  card with GPS, Bluetooth, WiMax and 802.11 radios. It
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
index f3c5565..7c4f44a 100644
--- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -405,39 +405,21 @@
 {
 	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
 	struct ieee80211_channel *chan = params->channel;
-	struct cfg80211_bss *bss;
 
 	if (!test_bit(IWM_STATUS_READY, &iwm->status))
 		return -EIO;
 
-	/* UMAC doesn't support creating IBSS network with specified bssid.
-	 * This should be removed after we have join only mode supported. */
+	/* UMAC doesn't support creating or joining an IBSS network
+	 * with specified bssid. */
 	if (params->bssid)
 		return -EOPNOTSUPP;
 
-	bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
-				params->ssid, params->ssid_len);
-	if (!bss) {
-		iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len);
-		schedule_timeout_interruptible(2 * HZ);
-		bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
-					params->ssid, params->ssid_len);
-	}
-	/* IBSS join only mode is not supported by UMAC ATM */
-	if (bss) {
-		cfg80211_put_bss(bss);
-		return -EOPNOTSUPP;
-	}
-
 	iwm->channel = ieee80211_frequency_to_channel(chan->center_freq);
 	iwm->umac_profile->ibss.band = chan->band;
 	iwm->umac_profile->ibss.channel = iwm->channel;
 	iwm->umac_profile->ssid.ssid_len = params->ssid_len;
 	memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len);
 
-	if (params->bssid)
-		memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN);
-
 	return iwm_send_mlme_profile(iwm);
 }
 
@@ -490,12 +472,12 @@
 		return 0;
 	}
 
+	if (wpa_version & NL80211_WPA_VERSION_1)
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WPA_ON_MSK;
+
 	if (wpa_version & NL80211_WPA_VERSION_2)
 		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_RSNA_ON_MSK;
 
-	if (wpa_version & NL80211_WPA_VERSION_1)
-		iwm->umac_profile->sec.flags |= UMAC_SEC_FLG_WPA_ON_MSK;
-
 	return 0;
 }
 
@@ -646,6 +628,13 @@
 		iwm->default_key = sme->key_idx;
 	}
 
+	/* WPA and open AUTH type from wpa_s means WPS (a.k.a. WSC) */
+	if ((iwm->umac_profile->sec.flags &
+	     (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK)) &&
+	    iwm->umac_profile->sec.auth_type == UMAC_AUTH_TYPE_OPEN) {
+			iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WSC_ON_MSK;
+	}
+
 	ret = iwm_send_mlme_profile(iwm);
 
 	if (iwm->umac_profile->sec.auth_type != UMAC_AUTH_TYPE_LEGACY_PSK ||
@@ -682,10 +671,24 @@
 static int iwm_cfg80211_set_txpower(struct wiphy *wiphy,
 				    enum tx_power_setting type, int dbm)
 {
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+	int ret;
+
 	switch (type) {
 	case TX_POWER_AUTOMATIC:
 		return 0;
+	case TX_POWER_FIXED:
+		if (!test_bit(IWM_STATUS_READY, &iwm->status))
+			return 0;
+
+		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+					      CFG_TX_PWR_LIMIT_USR, dbm * 2);
+		if (ret < 0)
+			return ret;
+
+		return iwm_tx_power_trigger(iwm);
 	default:
+		IWM_ERR(iwm, "Unsupported power type: %d\n", type);
 		return -EOPNOTSUPP;
 	}
 
@@ -696,7 +699,7 @@
 {
 	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
 
-	*dbm = iwm->txpower;
+	*dbm = iwm->txpower >> 1;
 
 	return 0;
 }
@@ -722,6 +725,33 @@
 				       CFG_POWER_INDEX, iwm->conf.power_index);
 }
 
+int iwm_cfg80211_set_pmksa(struct wiphy *wiphy, struct net_device *netdev,
+			   struct cfg80211_pmksa *pmksa)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+	return iwm_send_pmkid_update(iwm, pmksa, IWM_CMD_PMKID_ADD);
+}
+
+int iwm_cfg80211_del_pmksa(struct wiphy *wiphy, struct net_device *netdev,
+			   struct cfg80211_pmksa *pmksa)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+
+	return iwm_send_pmkid_update(iwm, pmksa, IWM_CMD_PMKID_DEL);
+}
+
+int iwm_cfg80211_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev)
+{
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+	struct cfg80211_pmksa pmksa;
+
+	memset(&pmksa, 0, sizeof(struct cfg80211_pmksa));
+
+	return iwm_send_pmkid_update(iwm, &pmksa, IWM_CMD_PMKID_FLUSH);
+}
+
+
 static struct cfg80211_ops iwm_cfg80211_ops = {
 	.change_virtual_intf = iwm_cfg80211_change_iface,
 	.add_key = iwm_cfg80211_add_key,
@@ -738,6 +768,9 @@
 	.set_tx_power = iwm_cfg80211_set_txpower,
 	.get_tx_power = iwm_cfg80211_get_txpower,
 	.set_power_mgmt = iwm_cfg80211_set_power_mgmt,
+	.set_pmksa = iwm_cfg80211_set_pmksa,
+	.del_pmksa = iwm_cfg80211_del_pmksa,
+	.flush_pmksa = iwm_cfg80211_flush_pmksa,
 };
 
 static const u32 cipher_suites[] = {
@@ -783,6 +816,7 @@
 
 	set_wiphy_dev(wdev->wiphy, dev);
 	wdev->wiphy->max_scan_ssids = UMAC_WIFI_IF_PROBE_OPTION_MAX;
+	wdev->wiphy->max_num_pmkids = UMAC_MAX_NUM_PMKIDS;
 	wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 				       BIT(NL80211_IFTYPE_ADHOC);
 	wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &iwm_band_2ghz;
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 84158b6..777584d 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -77,6 +77,11 @@
 	int ret;
 	u8 oid = hdr->oid;
 
+	if (!test_bit(IWM_STATUS_READY, &iwm->status)) {
+		IWM_ERR(iwm, "Interface is not ready yet");
+		return -EAGAIN;
+	}
+
 	umac_cmd.id = UMAC_CMD_OPCODE_WIFI_IF_WRAPPER;
 	umac_cmd.resp = resp;
 
@@ -94,6 +99,10 @@
 	return ret;
 }
 
+static int modparam_wiwi = COEX_MODE_CM;
+module_param_named(wiwi, modparam_wiwi, int, 0644);
+MODULE_PARM_DESC(wiwi, "Wifi-WiMAX coexistence: 1=SA, 2=XOR, 3=CM (default)");
+
 static struct coex_event iwm_sta_xor_prio_tbl[COEX_EVENTS_NUM] =
 {
 	{4, 3, 0, COEX_UNASSOC_IDLE_FLAGS},
@@ -117,18 +126,18 @@
 static struct coex_event iwm_sta_cm_prio_tbl[COEX_EVENTS_NUM] =
 {
 	{1, 1, 0, COEX_UNASSOC_IDLE_FLAGS},
-	{4, 3, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
+	{4, 4, 0, COEX_UNASSOC_MANUAL_SCAN_FLAGS},
 	{3, 3, 0, COEX_UNASSOC_AUTO_SCAN_FLAGS},
-	{5, 5, 0, COEX_CALIBRATION_FLAGS},
+	{6, 6, 0, COEX_CALIBRATION_FLAGS},
 	{3, 3, 0, COEX_PERIODIC_CALIBRATION_FLAGS},
-	{5, 4, 0, COEX_CONNECTION_ESTAB_FLAGS},
+	{6, 5, 0, COEX_CONNECTION_ESTAB_FLAGS},
 	{4, 4, 0, COEX_ASSOCIATED_IDLE_FLAGS},
 	{4, 4, 0, COEX_ASSOC_MANUAL_SCAN_FLAGS},
 	{4, 4, 0, COEX_ASSOC_AUTO_SCAN_FLAGS},
 	{4, 4, 0, COEX_ASSOC_ACTIVE_LEVEL_FLAGS},
 	{1, 1, 0, COEX_RF_ON_FLAGS},
 	{1, 1, 0, COEX_RF_OFF_FLAGS},
-	{6, 6, 0, COEX_STAND_ALONE_DEBUG_FLAGS},
+	{7, 7, 0, COEX_STAND_ALONE_DEBUG_FLAGS},
 	{5, 4, 0, COEX_IPAN_ASSOC_LEVEL_FLAGS},
 	{1, 1, 0, COEX_RSRVD1_FLAGS},
 	{1, 1, 0, COEX_RSRVD2_FLAGS}
@@ -143,7 +152,7 @@
 
 	coex_table_cmd.flags = COEX_FLAGS_STA_TABLE_VALID_MSK;
 
-	switch (iwm->conf.coexist_mode) {
+	switch (modparam_wiwi) {
 	case COEX_MODE_XOR:
 	case COEX_MODE_CM:
 		coex_enabled = 1;
@@ -168,7 +177,7 @@
 					COEX_FLAGS_ASSOC_WAKEUP_UMASK_MSK |
 					COEX_FLAGS_UNASSOC_WAKEUP_UMASK_MSK;
 
-		switch (iwm->conf.coexist_mode) {
+		switch (modparam_wiwi) {
 		case COEX_MODE_XOR:
 			memcpy(coex_table_cmd.sta_prio, iwm_sta_xor_prio_tbl,
 			       sizeof(iwm_sta_xor_prio_tbl));
@@ -179,7 +188,7 @@
 			break;
 		default:
 			IWM_ERR(iwm, "Invalid coex_mode 0x%x\n",
-				iwm->conf.coexist_mode);
+				modparam_wiwi);
 			break;
 		}
 	} else
@@ -187,7 +196,7 @@
 
 	return iwm_send_lmac_ptrough_cmd(iwm, COEX_PRIORITY_TABLE_CMD,
 				&coex_table_cmd,
-				sizeof(struct iwm_coex_prio_table_cmd), 1);
+				sizeof(struct iwm_coex_prio_table_cmd), 0);
 }
 
 int iwm_send_init_calib_cfg(struct iwm_priv *iwm, u8 calib_requested)
@@ -275,6 +284,17 @@
 	return ret;
 }
 
+int iwm_send_ct_kill_cfg(struct iwm_priv *iwm, u8 entry, u8 exit)
+{
+	struct iwm_ct_kill_cfg_cmd cmd;
+
+	cmd.entry_threshold = entry;
+	cmd.exit_threshold = exit;
+
+	return iwm_send_lmac_ptrough_cmd(iwm, REPLY_CT_KILL_CONFIG_CMD, &cmd,
+					 sizeof(struct iwm_ct_kill_cfg_cmd), 0);
+}
+
 int iwm_send_umac_reset(struct iwm_priv *iwm, __le32 reset_flags, bool resp)
 {
 	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
@@ -380,7 +400,7 @@
 		return ret;
 
 	ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
-				      CFG_COEX_MODE, iwm->conf.coexist_mode);
+				      CFG_COEX_MODE, modparam_wiwi);
 	if (ret < 0)
 		return ret;
 
@@ -778,11 +798,24 @@
 		return ret;
 
 	ret = wait_event_interruptible_timeout(iwm->mlme_queue,
-				(iwm->umac_profile_active == 0), 2 * HZ);
+				(iwm->umac_profile_active == 0), 5 * HZ);
 
 	return ret ? 0 : -EBUSY;
 }
 
+int iwm_tx_power_trigger(struct iwm_priv *iwm)
+{
+	struct iwm_umac_pwr_trigger pwr_trigger;
+
+	pwr_trigger.hdr.oid = UMAC_WIFI_IF_CMD_TX_PWR_TRIGGER;
+	pwr_trigger.hdr.buf_size =
+		cpu_to_le16(sizeof(struct iwm_umac_pwr_trigger) -
+			    sizeof(struct iwm_umac_wifi_if));
+
+
+	return iwm_send_wifi_if_cmd(iwm, &pwr_trigger, sizeof(pwr_trigger), 1);
+}
+
 int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags)
 {
 	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
@@ -900,3 +933,58 @@
 
 	return iwm_hal_send_target_cmd(iwm, &target_cmd, NULL);
 }
+
+int iwm_send_umac_stop_resume_tx(struct iwm_priv *iwm,
+				 struct iwm_umac_notif_stop_resume_tx *ntf)
+{
+	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
+	struct iwm_umac_cmd umac_cmd;
+	struct iwm_umac_cmd_stop_resume_tx stp_res_cmd;
+	struct iwm_sta_info *sta_info;
+	u8 sta_id = STA_ID_N_COLOR_ID(ntf->sta_id);
+	int i;
+
+	sta_info = &iwm->sta_table[sta_id];
+	if (!sta_info->valid) {
+		IWM_ERR(iwm, "Invalid STA: %d\n", sta_id);
+		return -EINVAL;
+	}
+
+	umac_cmd.id = UMAC_CMD_OPCODE_STOP_RESUME_STA_TX;
+	umac_cmd.resp = 0;
+
+	stp_res_cmd.flags = ntf->flags;
+	stp_res_cmd.sta_id = ntf->sta_id;
+	stp_res_cmd.stop_resume_tid_msk = ntf->stop_resume_tid_msk;
+	for (i = 0; i < IWM_UMAC_TID_NR; i++)
+		stp_res_cmd.last_seq_num[i] =
+			sta_info->tid_info[i].last_seq_num;
+
+	return iwm_hal_send_umac_cmd(iwm, &udma_cmd, &umac_cmd, &stp_res_cmd,
+				 sizeof(struct iwm_umac_cmd_stop_resume_tx));
+
+}
+
+int iwm_send_pmkid_update(struct iwm_priv *iwm,
+			  struct cfg80211_pmksa *pmksa, u32 command)
+{
+	struct iwm_umac_pmkid_update update;
+	int ret;
+
+	memset(&update, 0, sizeof(struct iwm_umac_pmkid_update));
+
+	update.command = cpu_to_le32(command);
+	if (pmksa->bssid)
+		memcpy(&update.bssid, pmksa->bssid, ETH_ALEN);
+	if (pmksa->pmkid)
+		memcpy(&update.pmkid, pmksa->pmkid, WLAN_PMKID_LEN);
+
+	ret = iwm_send_wifi_if_cmd(iwm, &update,
+				   sizeof(struct iwm_umac_pmkid_update), 0);
+	if (ret) {
+		IWM_ERR(iwm, "PMKID update command failed\n");
+		return ret;
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
index e24d5b6..06af055 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.h
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -102,7 +102,6 @@
 	CFG_SCAN_NUM_PASSIVE_CHAN_PER_PARTIAL_SCAN,
 	CFG_TLC_SUPPORTED_TX_HT_RATES,
 	CFG_TLC_SUPPORTED_TX_RATES,
-	CFG_TLC_VALID_ANTENNA,
 	CFG_TLC_SPATIAL_STREAM_SUPPORTED,
 	CFG_TLC_RETRY_PER_RATE,
 	CFG_TLC_RETRY_PER_HT_RATE,
@@ -136,6 +135,10 @@
 	CFG_TLC_RENEW_ADDBA_DELAY,
 	CFG_TLC_NUM_OF_MULTISEC_TO_COUN_LOAD,
 	CFG_TLC_IS_STABLE_IN_HT,
+	CFG_TLC_SR_SIC_1ST_FAIL,
+	CFG_TLC_SR_SIC_1ST_PASS,
+	CFG_TLC_SR_SIC_TOTAL_FAIL,
+	CFG_TLC_SR_SIC_TOTAL_PASS,
 	CFG_RLC_CHAIN_CTRL,
 	CFG_TRK_TABLE_OP_MODE,
 	CFG_TRK_TABLE_RSSI_THRESHOLD,
@@ -147,6 +150,58 @@
 	CFG_MLME_DBG_NOTIF_BLOCK,
 	CFG_BT_OFF_BECONS_INTERVALS,
 	CFG_BT_FRAG_DURATION,
+	CFG_ACTIVE_CHAINS,
+	CFG_CALIB_CTRL,
+	CFG_CAPABILITY_SUPPORTED_HT_RATES,
+	CFG_HT_MAC_PARAM_INFO,
+	CFG_MIMO_PS_MODE,
+	CFG_HT_DEFAULT_CAPABILIES_INFO,
+	CFG_LED_SC_RESOLUTION_FACTOR,
+	CFG_PTAM_ENERGY_CCK_DET_DEFAULT,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_DEFAULT,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_DEFAULT,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_DEFAULT,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_DEFAULT,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_DEFAULT,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_DEFAULT,
+	CFG_PTAM_ENERGY_CCK_DET_MIN_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_MIN_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MIN_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_MIN_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MIN_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_MIN_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MIN_VAL,
+	CFG_PTAM_ENERGY_CCK_DET_MAX_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_MAX_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MAX_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_MAX_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MAX_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_MAX_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MAX_VAL,
+	CFG_PTAM_ENERGY_CCK_DET_STEP_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_STEP_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_STEP_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_STEP_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_STEP_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_STEP_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_STEP_VAL,
+	CFG_PTAM_LINK_SENS_FA_OFDM_MAX,
+	CFG_PTAM_LINK_SENS_FA_OFDM_MIN,
+	CFG_PTAM_LINK_SENS_FA_CCK_MAX,
+	CFG_PTAM_LINK_SENS_FA_CCK_MIN,
+	CFG_PTAM_LINK_SENS_NRG_DIFF,
+	CFG_PTAM_LINK_SENS_NRG_MARGIN,
+	CFG_PTAM_LINK_SENS_MAX_NUMBER_OF_TIMES_IN_CCK_NO_FA,
+	CFG_PTAM_LINK_SENS_AUTO_CORR_MAX_TH_CCK,
+	CFG_AGG_MGG_TID_LOAD_ADDBA_THRESHOLD,
+	CFG_AGG_MGG_TID_LOAD_DELBA_THRESHOLD,
+	CFG_AGG_MGG_ADDBA_BUF_SIZE,
+	CFG_AGG_MGG_ADDBA_INACTIVE_TIMEOUT,
+	CFG_AGG_MGG_ADDBA_DEBUG_FLAGS,
+	CFG_SCAN_PERIODIC_RSSI_HIGH_THRESHOLD,
+	CFG_SCAN_PERIODIC_COEF_RSSI_HIGH,
+	CFG_11D_ENABLED,
+	CFG_11H_FEATURE_FLAGS,
 
 	/* <-- LAST --> */
 	CFG_TBL_FIX_LAST
@@ -155,7 +210,8 @@
 /* variable size table */
 enum {
 	CFG_NET_ADDR = 0,
-	CFG_PROFILE,
+	CFG_LED_PATTERN_TABLE,
+
 	/* <-- LAST --> */
 	CFG_TBL_VAR_LAST
 };
@@ -288,6 +344,9 @@
 /* iwm_umac_security.flag is WSC mode on -- bits [2:2] */
 #define UMAC_SEC_FLG_WSC_ON_POS		2
 #define UMAC_SEC_FLG_WSC_ON_SEED	1
+#define UMAC_SEC_FLG_WSC_ON_MSK         (UMAC_SEC_FLG_WSC_ON_SEED << \
+					 UMAC_SEC_FLG_WSC_ON_POS)
+
 
 /* Legacy profile can use only WEP40 and WEP104 for encryption and
  * OPEN or PSK for authentication */
@@ -382,10 +441,34 @@
 	u8 reserved[3];
 } __attribute__ ((packed));
 
+struct iwm_umac_pwr_trigger {
+	struct iwm_umac_wifi_if hdr;
+	__le32 reseved;
+} __attribute__ ((packed));
+
 struct iwm_umac_cmd_stats_req {
 	__le32 flags;
 } __attribute__ ((packed));
 
+struct iwm_umac_cmd_stop_resume_tx {
+	u8 flags;
+	u8 sta_id;
+	__le16 stop_resume_tid_msk;
+	__le16 last_seq_num[IWM_UMAC_TID_NR];
+	u16 reserved;
+} __attribute__ ((packed));
+
+#define IWM_CMD_PMKID_ADD   1
+#define IWM_CMD_PMKID_DEL   2
+#define IWM_CMD_PMKID_FLUSH 3
+
+struct iwm_umac_pmkid_update {
+	__le32 command;
+	u8 bssid[ETH_ALEN];
+	__le16 reserved;
+	u8 pmkid[WLAN_PMKID_LEN];
+} __attribute__ ((packed));
+
 /* LMAC commands */
 int iwm_read_mac(struct iwm_priv *iwm, u8 *mac);
 int iwm_send_prio_table(struct iwm_priv *iwm);
@@ -393,6 +476,7 @@
 int iwm_send_periodic_calib_cfg(struct iwm_priv *iwm, u8 calib_requested);
 int iwm_send_calib_results(struct iwm_priv *iwm);
 int iwm_store_rxiq_calib_result(struct iwm_priv *iwm);
+int iwm_send_ct_kill_cfg(struct iwm_priv *iwm, u8 entry, u8 exit);
 
 /* UMAC commands */
 int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
@@ -407,11 +491,16 @@
 int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id);
 int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx);
 int iwm_set_key(struct iwm_priv *iwm, bool remove, struct iwm_key *key);
+int iwm_tx_power_trigger(struct iwm_priv *iwm);
 int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags);
 int iwm_send_umac_channel_list(struct iwm_priv *iwm);
 int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
 		   int ssid_num);
 int iwm_scan_one_ssid(struct iwm_priv *iwm, u8 *ssid, int ssid_len);
+int iwm_send_umac_stop_resume_tx(struct iwm_priv *iwm,
+				 struct iwm_umac_notif_stop_resume_tx *ntf);
+int iwm_send_pmkid_update(struct iwm_priv *iwm,
+			  struct cfg80211_pmksa *pmksa, u32 command);
 
 /* UDMA commands */
 int iwm_target_reset(struct iwm_priv *iwm);
diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c
index 1465379..be992ca 100644
--- a/drivers/net/wireless/iwmc3200wifi/debugfs.c
+++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c
@@ -158,6 +158,29 @@
 		}
 
 		spin_unlock_irqrestore(&txq->queue.lock, flags);
+
+		spin_lock_irqsave(&txq->stopped_queue.lock, flags);
+
+		len += snprintf(buf + len, buf_len - len,
+				"\tStopped Queue len:   %d\n",
+				skb_queue_len(&txq->stopped_queue));
+		for (j = 0; j < skb_queue_len(&txq->stopped_queue); j++) {
+			struct iwm_tx_info *tx_info;
+
+			skb = skb->next;
+			tx_info = skb_to_tx_info(skb);
+
+			len += snprintf(buf + len, buf_len - len,
+					"\tSKB #%d\n", j);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\tsta:   %d\n", tx_info->sta);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\tcolor: %d\n", tx_info->color);
+			len += snprintf(buf + len, buf_len - len,
+					"\t\ttid:   %d\n", tx_info->tid);
+		}
+
+		spin_unlock_irqrestore(&txq->stopped_queue.lock, flags);
 	}
 
 	ret = simple_read_from_buffer(buffer, len, ppos, buf, buf_len);
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.c b/drivers/net/wireless/iwmc3200wifi/eeprom.c
index 365910f..8091421 100644
--- a/drivers/net/wireless/iwmc3200wifi/eeprom.c
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.c
@@ -66,6 +66,10 @@
 	[IWM_EEPROM_SKU_CAP] =
 	{"SKU capabilities", IWM_EEPROM_SKU_CAP_OFF, IWM_EEPROM_SKU_CAP_LEN},
 
+	[IWM_EEPROM_FAT_CHANNELS_CAP] =
+	{"HT channels capabilities", IWM_EEPROM_FAT_CHANNELS_CAP_OFF,
+	 IWM_EEPROM_FAT_CHANNELS_CAP_LEN},
+
 	[IWM_EEPROM_CALIB_RXIQ_OFFSET] =
 	{"RX IQ offset", IWM_EEPROM_CALIB_RXIQ_OFF, IWM_EEPROM_INDIRECT_LEN},
 
@@ -146,6 +150,52 @@
 	return iwm->eeprom + eeprom_map[eeprom_id].offset;
 }
 
+int iwm_eeprom_fat_channels(struct iwm_priv *iwm)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	struct ieee80211_supported_band *band;
+	u16 *channels, i;
+
+	channels = (u16 *)iwm_eeprom_access(iwm, IWM_EEPROM_FAT_CHANNELS_CAP);
+	if (IS_ERR(channels))
+		return PTR_ERR(channels);
+
+	band = wiphy->bands[IEEE80211_BAND_2GHZ];
+	band->ht_cap.ht_supported = true;
+
+	for (i = 0; i < IWM_EEPROM_FAT_CHANNELS_24; i++)
+		if (!(channels[i] & IWM_EEPROM_FAT_CHANNEL_ENABLED))
+			band->ht_cap.ht_supported = false;
+
+	band = wiphy->bands[IEEE80211_BAND_5GHZ];
+	band->ht_cap.ht_supported = true;
+	for (i = IWM_EEPROM_FAT_CHANNELS_24; i < IWM_EEPROM_FAT_CHANNELS; i++)
+		if (!(channels[i] & IWM_EEPROM_FAT_CHANNEL_ENABLED))
+			band->ht_cap.ht_supported = false;
+
+	return 0;
+}
+
+u32 iwm_eeprom_wireless_mode(struct iwm_priv *iwm)
+{
+	u16 sku_cap;
+	u32 wireless_mode = 0;
+
+	sku_cap = *((u16 *)iwm_eeprom_access(iwm, IWM_EEPROM_SKU_CAP));
+
+	if (sku_cap & IWM_EEPROM_SKU_CAP_BAND_24GHZ)
+		wireless_mode |= WIRELESS_MODE_11G;
+
+	if (sku_cap & IWM_EEPROM_SKU_CAP_BAND_52GHZ)
+		wireless_mode |= WIRELESS_MODE_11A;
+
+	if (sku_cap & IWM_EEPROM_SKU_CAP_11N_ENABLE)
+		wireless_mode |= WIRELESS_MODE_11N;
+
+	return wireless_mode;
+}
+
+
 int iwm_eeprom_init(struct iwm_priv *iwm)
 {
 	int i, ret = 0;
diff --git a/drivers/net/wireless/iwmc3200wifi/eeprom.h b/drivers/net/wireless/iwmc3200wifi/eeprom.h
index cdb31a6..4e3a3fd 100644
--- a/drivers/net/wireless/iwmc3200wifi/eeprom.h
+++ b/drivers/net/wireless/iwmc3200wifi/eeprom.h
@@ -48,6 +48,7 @@
 	IWM_EEPROM_CARD_ID,
 	IWM_EEPROM_RADIO_CONF,
 	IWM_EEPROM_SKU_CAP,
+	IWM_EEPROM_FAT_CHANNELS_CAP,
 
 	IWM_EEPROM_INDIRECT_OFFSET,
 	IWM_EEPROM_CALIB_RXIQ_OFFSET = IWM_EEPROM_INDIRECT_OFFSET,
@@ -58,14 +59,15 @@
 	IWM_EEPROM_LAST,
 };
 
-#define IWM_EEPROM_SIG_OFF             0x00
-#define IWM_EEPROM_VERSION_OFF        (0x54 << 1)
-#define IWM_EEPROM_OEM_HW_VERSION_OFF (0x56 << 1)
-#define IWM_EEPROM_MAC_VERSION_OFF    (0x30 << 1)
-#define IWM_EEPROM_CARD_ID_OFF        (0x5d << 1)
-#define IWM_EEPROM_RADIO_CONF_OFF     (0x58 << 1)
-#define IWM_EEPROM_SKU_CAP_OFF        (0x55 << 1)
-#define IWM_EEPROM_CALIB_CONFIG_OFF   (0x7c << 1)
+#define IWM_EEPROM_SIG_OFF                 0x00
+#define IWM_EEPROM_VERSION_OFF            (0x54 << 1)
+#define IWM_EEPROM_OEM_HW_VERSION_OFF     (0x56 << 1)
+#define IWM_EEPROM_MAC_VERSION_OFF        (0x30 << 1)
+#define IWM_EEPROM_CARD_ID_OFF            (0x5d << 1)
+#define IWM_EEPROM_RADIO_CONF_OFF         (0x58 << 1)
+#define IWM_EEPROM_SKU_CAP_OFF            (0x55 << 1)
+#define IWM_EEPROM_CALIB_CONFIG_OFF       (0x7c << 1)
+#define IWM_EEPROM_FAT_CHANNELS_CAP_OFF   (0xde << 1)
 
 #define IWM_EEPROM_SIG_LEN              4
 #define IWM_EEPROM_VERSION_LEN          2
@@ -74,6 +76,7 @@
 #define IWM_EEPROM_CARD_ID_LEN          2
 #define IWM_EEPROM_RADIO_CONF_LEN       2
 #define IWM_EEPROM_SKU_CAP_LEN          2
+#define IWM_EEPROM_FAT_CHANNELS_CAP_LEN 40
 #define IWM_EEPROM_INDIRECT_LEN		2
 
 #define IWM_MAX_EEPROM_DATA_LEN         240
@@ -87,6 +90,14 @@
 #define IWM_EEPROM_SKU_CAP_BAND_52GHZ           (1 << 5)
 #define IWM_EEPROM_SKU_CAP_11N_ENABLE           (1 << 6)
 
+#define IWM_EEPROM_FAT_CHANNELS 20
+/* 2.4 gHz FAT primary channels: 1, 2, 3, 4, 5, 6, 7, 8, 9 */
+#define IWM_EEPROM_FAT_CHANNELS_24 9
+/* 5.2 gHz FAT primary channels: 36,44,52,60,100,108,116,124,132,149,157 */
+#define IWM_EEPROM_FAT_CHANNELS_52 11
+
+#define IWM_EEPROM_FAT_CHANNEL_ENABLED (1 << 0)
+
 enum {
 	IWM_EEPROM_CALIB_CAL_HDR,
 	IWM_EEPROM_CALIB_TX_POWER,
@@ -110,5 +121,7 @@
 int iwm_eeprom_init(struct iwm_priv *iwm);
 void iwm_eeprom_exit(struct iwm_priv *iwm);
 u8 *iwm_eeprom_access(struct iwm_priv *iwm, u8 eeprom_id);
+int iwm_eeprom_fat_channels(struct iwm_priv *iwm);
+u32 iwm_eeprom_wireless_mode(struct iwm_priv *iwm);
 
 #endif
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c
index 6b0bcad..4906709 100644
--- a/drivers/net/wireless/iwmc3200wifi/fw.c
+++ b/drivers/net/wireless/iwmc3200wifi/fw.c
@@ -217,6 +217,13 @@
 		 IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
 		 IWM_BUILD_DAY(build_date));
 
+	if (!strcmp(img_name, iwm->bus_ops->umac_name))
+		sprintf(iwm->umac_version, "%02X.%02X",
+			ver->major, ver->minor);
+
+	if (!strcmp(img_name, iwm->bus_ops->lmac_name))
+		sprintf(iwm->lmac_version, "%02X.%02X",
+			ver->major, ver->minor);
 
  err_release_fw:
 	release_firmware(fw);
@@ -398,6 +405,8 @@
 	iwm_send_prio_table(iwm);
 	iwm_send_calib_results(iwm);
 	iwm_send_periodic_calib_cfg(iwm, periodic_calib_map);
+	iwm_send_ct_kill_cfg(iwm, iwm->conf.ct_kill_entry,
+			     iwm->conf.ct_kill_exit);
 
 	return 0;
 
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 1b02a4e..5a26bb0 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -65,6 +65,8 @@
 	u32 sdio_ior_timeout;
 	unsigned long calib_map;
 	unsigned long expected_calib_map;
+	u8 ct_kill_entry;
+	u8 ct_kill_exit;
 	bool reset_on_fatal_err;
 	bool auto_connect;
 	bool wimax_not_present;
@@ -79,7 +81,6 @@
 	u32 assoc_timeout;
 	u32 roam_timeout;
 	u32 wireless_mode;
-	u32 coexist_mode;
 
 	u8 ibss_band;
 	u8 ibss_channel;
@@ -129,11 +130,18 @@
 	unsigned long buf_size;
 };
 
+struct iwm_tid_info {
+	__le16 last_seq_num;
+	bool stopped;
+	struct mutex mutex;
+};
+
 struct iwm_sta_info {
 	u8 addr[ETH_ALEN];
 	bool valid;
 	bool qos;
 	u8 color;
+	struct iwm_tid_info tid_info[IWM_UMAC_TID_NR];
 };
 
 struct iwm_tx_info {
@@ -183,6 +191,8 @@
 struct iwm_tx_queue {
 	int id;
 	struct sk_buff_head queue;
+	struct sk_buff_head stopped_queue;
+	spinlock_t lock;
 	struct workqueue_struct *wq;
 	struct work_struct worker;
 	u8 concat_buf[IWM_HAL_CONCATENATE_BUF_SIZE];
@@ -276,12 +286,14 @@
 	struct iw_statistics wstats;
 	struct delayed_work stats_request;
 	struct delayed_work disconnect;
+	struct delayed_work ct_kill_delay;
 
 	struct iwm_debugfs dbg;
 
 	u8 *eeprom;
 	struct timer_list watchdog;
 	struct work_struct reset_worker;
+	struct work_struct auth_retry_worker;
 	struct mutex mutex;
 
 	u8 *req_ie;
@@ -290,6 +302,8 @@
 	int resp_ie_len;
 
 	struct iwm_fw_error_hdr *last_fw_err;
+	char umac_version[8];
+	char lmac_version[8];
 
 	char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
@@ -335,6 +349,7 @@
 int iwm_down(struct iwm_priv *iwm);
 
 /* TX API */
+u16 iwm_tid_to_queue(u16 tid);
 void iwm_tx_credit_inc(struct iwm_priv *iwm, int id, int total_freed_pages);
 void iwm_tx_worker(struct work_struct *work);
 int iwm_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index 6c1a14c..a3a79b5 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -187,6 +187,14 @@
 				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
 				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
 
+/* CT kill config command */
+struct iwm_ct_kill_cfg_cmd {
+	u32 exit_threshold;
+	u32 reserved;
+	u32 entry_threshold;
+} __attribute__ ((packed));
+
+
 /* LMAC OP CODES */
 #define REPLY_PAD			0x0
 #define REPLY_ALIVE			0x1
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index 222eb2c..7f34d6d 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -64,9 +64,10 @@
 				  BIT(PHY_CALIBRATE_TX_IQ_CMD)	|
 				  BIT(PHY_CALIBRATE_RX_IQ_CMD)	|
 				  BIT(SHILOH_PHY_CALIBRATE_BASE_BAND_CMD),
+	.ct_kill_entry		= 110,
+	.ct_kill_exit		= 110,
 	.reset_on_fatal_err	= 1,
 	.auto_connect		= 1,
-	.wimax_not_present	= 0,
 	.enable_qos		= 1,
 	.mode			= UMAC_MODE_BSS,
 
@@ -78,8 +79,8 @@
 
 	.assoc_timeout		= 2,
 	.roam_timeout		= 10,
-	.wireless_mode		= WIRELESS_MODE_11A | WIRELESS_MODE_11G,
-	.coexist_mode		= COEX_MODE_CM,
+	.wireless_mode		= WIRELESS_MODE_11A | WIRELESS_MODE_11G |
+				  WIRELESS_MODE_11N,
 
 	/* IBSS */
 	.ibss_band		= UMAC_BAND_2GHZ,
@@ -92,6 +93,10 @@
 module_param_named(reset, modparam_reset, bool, 0644);
 MODULE_PARM_DESC(reset, "reset on firmware errors (default 0 [not reset])");
 
+static int modparam_wimax_enable = 1;
+module_param_named(wimax_enable, modparam_wimax_enable, bool, 0644);
+MODULE_PARM_DESC(wimax_enable, "Enable wimax core (default 1 [wimax enabled])");
+
 int iwm_mode_to_nl80211_iftype(int mode)
 {
 	switch (mode) {
@@ -134,6 +139,17 @@
 	cfg80211_disconnected(iwm_to_ndev(iwm), 0, NULL, 0, GFP_KERNEL);
 }
 
+static void iwm_ct_kill_work(struct work_struct *work)
+{
+	struct iwm_priv *iwm =
+		container_of(work, struct iwm_priv, ct_kill_delay.work);
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+
+	IWM_INFO(iwm, "CT kill delay timeout\n");
+
+	wiphy_rfkill_set_hw_state(wiphy, false);
+}
+
 static int __iwm_up(struct iwm_priv *iwm);
 static int __iwm_down(struct iwm_priv *iwm);
 
@@ -195,6 +211,33 @@
 	mutex_unlock(&iwm->mutex);
 }
 
+static void iwm_auth_retry_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	int i, ret;
+
+	iwm = container_of(work, struct iwm_priv, auth_retry_worker);
+	if (iwm->umac_profile_active) {
+		ret = iwm_invalidate_mlme_profile(iwm);
+		if (ret < 0)
+			return;
+	}
+
+	iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+
+	ret = iwm_send_mlme_profile(iwm);
+	if (ret < 0)
+		return;
+
+	for (i = 0; i < IWM_NUM_KEYS; i++)
+		if (iwm->keys[i].key_len)
+			iwm_set_key(iwm, 0, &iwm->keys[i]);
+
+	iwm_set_tx_key(iwm, iwm->default_key);
+}
+
+
+
 static void iwm_watchdog(unsigned long data)
 {
 	struct iwm_priv *iwm = (struct iwm_priv *)data;
@@ -207,7 +250,7 @@
 
 int iwm_priv_init(struct iwm_priv *iwm)
 {
-	int i;
+	int i, j;
 	char name[32];
 
 	iwm->status = 0;
@@ -226,7 +269,9 @@
 	iwm->scan_id = 1;
 	INIT_DELAYED_WORK(&iwm->stats_request, iwm_statistics_request);
 	INIT_DELAYED_WORK(&iwm->disconnect, iwm_disconnect_work);
+	INIT_DELAYED_WORK(&iwm->ct_kill_delay, iwm_ct_kill_work);
 	INIT_WORK(&iwm->reset_worker, iwm_reset_worker);
+	INIT_WORK(&iwm->auth_retry_worker, iwm_auth_retry_worker);
 	INIT_LIST_HEAD(&iwm->bss_list);
 
 	skb_queue_head_init(&iwm->rx_list);
@@ -249,6 +294,8 @@
 			return -EAGAIN;
 
 		skb_queue_head_init(&iwm->txq[i].queue);
+		skb_queue_head_init(&iwm->txq[i].stopped_queue);
+		spin_lock_init(&iwm->txq[i].lock);
 	}
 
 	for (i = 0; i < IWM_NUM_KEYS; i++)
@@ -256,6 +303,12 @@
 
 	iwm->default_key = -1;
 
+	for (i = 0; i < IWM_STA_TABLE_NUM; i++)
+		for (j = 0; j < IWM_UMAC_TID_NR; j++) {
+			mutex_init(&iwm->sta_table[i].tid_info[j].mutex);
+			iwm->sta_table[i].tid_info[j].stopped = false;
+		}
+
 	init_timer(&iwm->watchdog);
 	iwm->watchdog.function = iwm_watchdog;
 	iwm->watchdog.data = (unsigned long)iwm;
@@ -436,7 +489,7 @@
 	int ret;
 
 	/* check Wimax is off and config debug monitor */
-	if (iwm->conf.wimax_not_present) {
+	if (!modparam_wimax_enable) {
 		u32 data1 = 0x1f;
 		u32 addr1 = 0x606BE258;
 
@@ -529,6 +582,7 @@
 
 	for (i = 0; i < IWM_TX_QUEUES; i++) {
 		skb_queue_purge(&iwm->txq[i].queue);
+		skb_queue_purge(&iwm->txq[i].stopped_queue);
 
 		iwm->txq[i].concat_count = 0;
 		iwm->txq[i].concat_ptr = iwm->txq[i].concat_buf;
@@ -587,6 +641,8 @@
 {
 	int ret;
 	struct iwm_notif *notif_reboot, *notif_ack = NULL;
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+	u32 wireless_mode;
 
 	ret = iwm_bus_enable(iwm);
 	if (ret) {
@@ -638,6 +694,8 @@
 		IWM_ERR(iwm, "MAC reading failed\n");
 		goto err_disable;
 	}
+	memcpy(iwm_to_ndev(iwm)->perm_addr, iwm_to_ndev(iwm)->dev_addr,
+		ETH_ALEN);
 
 	/* We can load the FWs */
 	ret = iwm_load_fw(iwm);
@@ -646,6 +704,30 @@
 		goto err_disable;
 	}
 
+	ret = iwm_eeprom_fat_channels(iwm);
+	if (ret) {
+		IWM_ERR(iwm, "Couldnt read HT channels EEPROM entries\n");
+		goto err_fw;
+	}
+
+	/*
+	 * Read our SKU capabilities.
+	 * If it's valid, we AND the configured wireless mode with the
+	 * device EEPROM value as the current profile wireless mode.
+	 */
+	wireless_mode = iwm_eeprom_wireless_mode(iwm);
+	if (wireless_mode) {
+		iwm->conf.wireless_mode &= wireless_mode;
+		if (iwm->umac_profile)
+			iwm->umac_profile->wireless_mode =
+					iwm->conf.wireless_mode;
+	} else
+		IWM_ERR(iwm, "Wrong SKU capabilities: 0x%x\n",
+			*((u16 *)iwm_eeprom_access(iwm, IWM_EEPROM_SKU_CAP)));
+
+	snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "L%s_U%s",
+		 iwm->lmac_version, iwm->umac_version);
+
 	/* We configure the UMAC and enable the wifi module */
 	ret = iwm_send_umac_config(iwm,
 			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_CORE_EN) |
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index 35ec006..e4f0f87 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -76,6 +76,14 @@
  */
 static const u16 iwm_1d_to_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
 
+u16 iwm_tid_to_queue(u16 tid)
+{
+	if (tid > IWM_UMAC_TID_NR - 2)
+		return -EINVAL;
+
+	return iwm_1d_to_queue[tid];
+}
+
 static u16 iwm_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	skb->priority = cfg80211_classify8021d(skb);
@@ -152,6 +160,7 @@
 	if (!iwm_to_ndev(iwm))
 		return;
 
+	cancel_delayed_work_sync(&iwm->ct_kill_delay);
 	free_netdev(iwm_to_ndev(iwm));
 	iwm_priv_deinit(iwm);
 	kfree(iwm->umac_profile);
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 771a301..72c27a3e 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -423,7 +423,9 @@
 			if (IS_ERR(ticket_node))
 				return PTR_ERR(ticket_node);
 
-			IWM_DBG_RX(iwm, DBG, "TICKET RELEASE(%d)\n",
+			IWM_DBG_RX(iwm, DBG, "TICKET %s(%d)\n",
+				   ticket->action ==  IWM_RX_TICKET_RELEASE ?
+				   "RELEASE" : "DROP",
 				   ticket->id);
 			list_add_tail(&ticket_node->node, &iwm->rx_tickets);
 
@@ -500,6 +502,18 @@
 	return 0;
 }
 
+static u8 iwm_is_open_wep_profile(struct iwm_priv *iwm)
+{
+	if ((iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_40 ||
+	     iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_104) &&
+	    (iwm->umac_profile->sec.ucast_cipher ==
+	     iwm->umac_profile->sec.mcast_cipher) &&
+	    (iwm->umac_profile->sec.auth_type == UMAC_AUTH_TYPE_OPEN))
+	       return 1;
+
+       return 0;
+}
+
 static int iwm_mlme_assoc_complete(struct iwm_priv *iwm, u8 *buf,
 				   unsigned long buf_size,
 				   struct iwm_wifi_cmd *cmd)
@@ -565,11 +579,17 @@
 			goto ibss;
 
 		if (!test_bit(IWM_STATUS_RESETTING, &iwm->status))
-			cfg80211_connect_result(iwm_to_ndev(iwm),
-						complete->bssid,
-						NULL, 0, NULL, 0,
-						WLAN_STATUS_UNSPECIFIED_FAILURE,
-						GFP_KERNEL);
+			if (!iwm_is_open_wep_profile(iwm)) {
+				cfg80211_connect_result(iwm_to_ndev(iwm),
+					       complete->bssid,
+					       NULL, 0, NULL, 0,
+					       WLAN_STATUS_UNSPECIFIED_FAILURE,
+					       GFP_KERNEL);
+			} else {
+				/* Let's try shared WEP auth */
+				IWM_ERR(iwm, "Trying WEP shared auth\n");
+				schedule_work(&iwm->auth_retry_worker);
+			}
 		else
 			cfg80211_disconnected(iwm_to_ndev(iwm), 0, NULL, 0,
 					      GFP_KERNEL);
@@ -713,6 +733,19 @@
 	return 0;
 }
 
+static int iwm_mlme_medium_lost(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+
+	IWM_DBG_NTF(iwm, DBG, "WiFi/WiMax coexistence radio is OFF\n");
+
+	wiphy_rfkill_set_hw_state(wiphy, true);
+
+	return 0;
+}
+
 static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf,
 				     unsigned long buf_size,
 				     struct iwm_wifi_cmd *cmd)
@@ -899,6 +932,8 @@
 	case WIFI_IF_NTFY_EXTENDED_IE_REQUIRED:
 		IWM_DBG_MLME(iwm, DBG, "Extended IE required\n");
 		break;
+	case WIFI_IF_NTFY_RADIO_PREEMPTION:
+		return iwm_mlme_medium_lost(iwm, buf, buf_size, cmd);
 	case WIFI_IF_NTFY_BSS_TRK_TABLE_CHANGED:
 		return iwm_mlme_update_bss_table(iwm, buf, buf_size, cmd);
 	case WIFI_IF_NTFY_BSS_TRK_ENTRIES_REMOVED:
@@ -1052,12 +1087,83 @@
 	return 0;
 }
 
+static int iwm_ntf_stop_resume_tx(struct iwm_priv *iwm, u8 *buf,
+				  unsigned long buf_size,
+				  struct iwm_wifi_cmd *cmd)
+{
+	struct iwm_umac_notif_stop_resume_tx *stp_res_tx =
+		(struct iwm_umac_notif_stop_resume_tx *)buf;
+	struct iwm_sta_info *sta_info;
+	struct iwm_tid_info *tid_info;
+	u8 sta_id = STA_ID_N_COLOR_ID(stp_res_tx->sta_id);
+	u16 tid_msk = le16_to_cpu(stp_res_tx->stop_resume_tid_msk);
+	int bit, ret = 0;
+	bool stop = false;
+
+	IWM_DBG_NTF(iwm, DBG, "stop/resume notification:\n"
+		    "\tflags:       0x%x\n"
+		    "\tSTA id:      %d\n"
+		    "\tTID bitmask: 0x%x\n",
+		    stp_res_tx->flags, stp_res_tx->sta_id,
+		    stp_res_tx->stop_resume_tid_msk);
+
+	if (stp_res_tx->flags & UMAC_STOP_TX_FLAG)
+		stop = true;
+
+	sta_info = &iwm->sta_table[sta_id];
+	if (!sta_info->valid) {
+		IWM_ERR(iwm, "Stoping an invalid STA: %d %d\n",
+			sta_id, stp_res_tx->sta_id);
+		return -EINVAL;
+	}
+
+	for_each_bit(bit, (unsigned long *)&tid_msk, IWM_UMAC_TID_NR) {
+		tid_info = &sta_info->tid_info[bit];
+
+		mutex_lock(&tid_info->mutex);
+		tid_info->stopped = stop;
+		mutex_unlock(&tid_info->mutex);
+
+		if (!stop) {
+			struct iwm_tx_queue *txq;
+			u16 queue = iwm_tid_to_queue(bit);
+
+			if (queue < 0)
+				continue;
+
+			txq = &iwm->txq[queue];
+			/*
+			 * If we resume, we have to move our SKBs
+			 * back to the tx queue and queue some work.
+			 */
+			spin_lock_bh(&txq->lock);
+			skb_queue_splice_init(&txq->queue, &txq->stopped_queue);
+			spin_unlock_bh(&txq->lock);
+
+			queue_work(txq->wq, &txq->worker);
+		}
+
+	}
+
+	/* We send an ACK only for the stop case */
+	if (stop)
+		ret = iwm_send_umac_stop_resume_tx(iwm, stp_res_tx);
+
+	return ret;
+}
+
 static int iwm_ntf_wifi_if_wrapper(struct iwm_priv *iwm, u8 *buf,
 				   unsigned long buf_size,
 				   struct iwm_wifi_cmd *cmd)
 {
-	struct iwm_umac_wifi_if *hdr =
-			(struct iwm_umac_wifi_if *)cmd->buf.payload;
+	struct iwm_umac_wifi_if *hdr;
+
+	if (cmd == NULL) {
+		IWM_ERR(iwm, "Couldn't find expected wifi command\n");
+		return -EINVAL;
+	}
+
+	hdr = (struct iwm_umac_wifi_if *)cmd->buf.payload;
 
 	IWM_DBG_NTF(iwm, DBG, "WIFI_IF_WRAPPER cmd is delivered to UMAC: "
 		    "oid is 0x%x\n", hdr->oid);
@@ -1079,6 +1185,7 @@
 	return 0;
 }
 
+#define CT_KILL_DELAY (30 * HZ)
 static int iwm_ntf_card_state(struct iwm_priv *iwm, u8 *buf,
 			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
 {
@@ -1091,7 +1198,20 @@
 		 flags & IWM_CARD_STATE_HW_DISABLED ? "ON" : "OFF",
 		 flags & IWM_CARD_STATE_CTKILL_DISABLED ? "ON" : "OFF");
 
-	wiphy_rfkill_set_hw_state(wiphy, flags & IWM_CARD_STATE_HW_DISABLED);
+	if (flags & IWM_CARD_STATE_CTKILL_DISABLED) {
+		/*
+		 * We got a CTKILL event: We bring the interface down in
+		 * oder to cool the device down, and try to bring it up
+		 * 30 seconds later. If it's still too hot, we'll go through
+		 * this code path again.
+		 */
+		cancel_delayed_work_sync(&iwm->ct_kill_delay);
+		schedule_delayed_work(&iwm->ct_kill_delay, CT_KILL_DELAY);
+	}
+
+	wiphy_rfkill_set_hw_state(wiphy, flags &
+				  (IWM_CARD_STATE_HW_DISABLED |
+				   IWM_CARD_STATE_CTKILL_DISABLED));
 
 	return 0;
 }
@@ -1282,6 +1402,14 @@
 
 	switch (le32_to_cpu(hdr->cmd)) {
 	case UMAC_REBOOT_BARKER:
+		if (test_bit(IWM_STATUS_READY, &iwm->status)) {
+			IWM_ERR(iwm, "Unexpected BARKER\n");
+
+			schedule_work(&iwm->reset_worker);
+
+			return 0;
+		}
+
 		return iwm_notif_send(iwm, NULL, IWM_BARKER_REBOOT_NOTIFICATION,
 				      IWM_SRC_UDMA, buf, buf_size);
 	case UMAC_ACK_BARKER:
@@ -1308,6 +1436,7 @@
 	[UMAC_NOTIFY_OPCODE_STATS]		= iwm_ntf_statistics,
 	[UMAC_CMD_OPCODE_EEPROM_PROXY]		= iwm_ntf_eeprom_proxy,
 	[UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST]	= iwm_ntf_channel_info_list,
+	[UMAC_CMD_OPCODE_STOP_RESUME_STA_TX]	= iwm_ntf_stop_resume_tx,
 	[REPLY_RX_MPDU_CMD]			= iwm_ntf_rx_packet,
 	[UMAC_CMD_OPCODE_WIFI_IF_WRAPPER]	= iwm_ntf_wifi_if_wrapper,
 };
@@ -1444,7 +1573,8 @@
 		}
 		break;
 	case IWM_RX_TICKET_DROP:
-		IWM_DBG_RX(iwm, DBG, "DROP packet\n");
+		IWM_DBG_RX(iwm, DBG, "DROP packet: 0x%x\n",
+			   le16_to_cpu(ticket_node->ticket->flags));
 		kfree_skb(packet->skb);
 		break;
 	default:
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
index 8b1de84..a7ec7ea 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.c
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -224,8 +224,6 @@
 	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
 	int ret;
 
-	iwm_reset(iwm);
-
 	sdio_claim_host(hw->func);
 	sdio_writeb(hw->func, 0, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
 	if (ret < 0)
@@ -237,6 +235,8 @@
 
 	iwm_sdio_rx_free(hw);
 
+	iwm_reset(iwm);
+
 	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO disable\n");
 
 	return 0;
@@ -399,6 +399,9 @@
 	.calib_lmac_name = "iwmc3200wifi-calib-sdio.bin",
 	.lmac_name = "iwmc3200wifi-lmac-sdio.bin",
 };
+MODULE_FIRMWARE("iwmc3200wifi-umac-sdio.bin");
+MODULE_FIRMWARE("iwmc3200wifi-calib-sdio.bin");
+MODULE_FIRMWARE("iwmc3200wifi-lmac-sdio.bin");
 
 static int iwm_sdio_probe(struct sdio_func *func,
 			  const struct sdio_device_id *id)
@@ -493,8 +496,10 @@
 }
 
 static const struct sdio_device_id iwm_sdio_ids[] = {
-	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
-		      SDIO_DEVICE_ID_INTEL_IWMC3200WIFI) },
+	/* Global/AGN SKU */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, 0x1403) },
+	/* BGN SKU */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, 0x1408) },
 	{ /* end: all zeroes */	},
 };
 MODULE_DEVICE_TABLE(sdio, iwm_sdio_ids);
diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c
index e3b4f7902d..55905f0 100644
--- a/drivers/net/wireless/iwmc3200wifi/tx.c
+++ b/drivers/net/wireless/iwmc3200wifi/tx.c
@@ -329,7 +329,7 @@
 
 	memcpy(buf + sizeof(*hdr), skb->data, skb->len);
 
-	return 0;
+	return umac_cmd.seq_num;
 }
 
 static int iwm_tx_send_concat_packets(struct iwm_priv *iwm,
@@ -354,16 +354,15 @@
 	return ret;
 }
 
-#define CONFIG_IWM_TX_CONCATENATED 1
-
 void iwm_tx_worker(struct work_struct *work)
 {
 	struct iwm_priv *iwm;
 	struct iwm_tx_info *tx_info = NULL;
 	struct sk_buff *skb;
-	int cmdlen, ret;
 	struct iwm_tx_queue *txq;
-	int pool_id;
+	struct iwm_sta_info *sta_info;
+	struct iwm_tid_info *tid_info;
+	int cmdlen, ret, pool_id;
 
 	txq = container_of(work, struct iwm_tx_queue, worker);
 	iwm = container_of(txq, struct iwm_priv, txq[txq->id]);
@@ -373,19 +372,46 @@
 	while (!test_bit(pool_id, &iwm->tx_credit.full_pools_map) &&
 	       !skb_queue_empty(&txq->queue)) {
 
+		spin_lock_bh(&txq->lock);
 		skb = skb_dequeue(&txq->queue);
+		spin_unlock_bh(&txq->lock);
+
 		tx_info = skb_to_tx_info(skb);
+		sta_info = &iwm->sta_table[tx_info->sta];
+		if (!sta_info->valid) {
+			IWM_ERR(iwm, "Trying to send a frame to unknown STA\n");
+			kfree_skb(skb);
+			continue;
+		}
+
+		tid_info = &sta_info->tid_info[tx_info->tid];
+
+		mutex_lock(&tid_info->mutex);
+
+		/*
+		 * If the RAxTID is stopped, we queue the skb to the stopped
+		 * queue.
+		 * Whenever we'll get a UMAC notification to resume the tx flow
+		 * for this RAxTID, we'll merge back the stopped queue into the
+		 * regular queue. See iwm_ntf_stop_resume_tx() from rx.c.
+		 */
+		if (tid_info->stopped) {
+			IWM_DBG_TX(iwm, DBG, "%dx%d stopped\n",
+				   tx_info->sta, tx_info->tid);
+			spin_lock_bh(&txq->lock);
+			skb_queue_tail(&txq->stopped_queue, skb);
+			spin_unlock_bh(&txq->lock);
+
+			mutex_unlock(&tid_info->mutex);
+			continue;
+		}
+
 		cmdlen = IWM_UDMA_HDR_LEN + skb->len;
 
 		IWM_DBG_TX(iwm, DBG, "Tx frame on queue %d: skb: 0x%p, sta: "
 			   "%d, color: %d\n", txq->id, skb, tx_info->sta,
 			   tx_info->color);
 
-#if !CONFIG_IWM_TX_CONCATENATED
-		/* temporarily keep this to comparing the performance */
-		ret = iwm_send_packet(iwm, skb, pool_id);
-#else
-
 		if (txq->concat_count + cmdlen > IWM_HAL_CONCATENATE_BUF_SIZE)
 			iwm_tx_send_concat_packets(iwm, txq);
 
@@ -393,14 +419,21 @@
 		if (ret) {
 			IWM_DBG_TX(iwm, DBG, "not enough tx_credit for queue "
 				   "%d, Tx worker stopped\n", txq->id);
+			spin_lock_bh(&txq->lock);
 			skb_queue_head(&txq->queue, skb);
+			spin_unlock_bh(&txq->lock);
+
+			mutex_unlock(&tid_info->mutex);
 			break;
 		}
 
 		txq->concat_ptr = txq->concat_buf + txq->concat_count;
-		iwm_tx_build_packet(iwm, skb, pool_id, txq->concat_ptr);
+		tid_info->last_seq_num =
+			iwm_tx_build_packet(iwm, skb, pool_id, txq->concat_ptr);
 		txq->concat_count += ALIGN(cmdlen, 16);
-#endif
+
+		mutex_unlock(&tid_info->mutex);
+
 		kfree_skb(skb);
 	}
 
@@ -419,14 +452,14 @@
 	struct iwm_priv *iwm = ndev_to_iwm(netdev);
 	struct net_device *ndev = iwm_to_ndev(iwm);
 	struct wireless_dev *wdev = iwm_to_wdev(iwm);
-	u8 *dst_addr;
 	struct iwm_tx_info *tx_info;
 	struct iwm_tx_queue *txq;
 	struct iwm_sta_info *sta_info;
-	u8 sta_id;
+	u8 *dst_addr, sta_id;
 	u16 queue;
 	int ret;
 
+
 	if (!test_bit(IWM_STATUS_ASSOCIATED, &iwm->status)) {
 		IWM_DBG_TX(iwm, DBG, "LINK: stop netif_all_queues: "
 			   "not associated\n");
@@ -440,7 +473,8 @@
 	txq = &iwm->txq[queue];
 
 	/* No free space for Tx, tx_worker is too slow */
-	if (skb_queue_len(&txq->queue) > IWM_TX_LIST_SIZE) {
+	if ((skb_queue_len(&txq->queue) > IWM_TX_LIST_SIZE) ||
+	    (skb_queue_len(&txq->stopped_queue) > IWM_TX_LIST_SIZE)) {
 		IWM_DBG_TX(iwm, DBG, "LINK: stop netif_subqueue[%d]\n", queue);
 		netif_stop_subqueue(netdev, queue);
 		return NETDEV_TX_BUSY;
@@ -477,7 +511,9 @@
 	else
 		tx_info->tid = IWM_UMAC_MGMT_TID;
 
+	spin_lock_bh(&iwm->txq[queue].lock);
 	skb_queue_tail(&iwm->txq[queue].queue, skb);
+	spin_unlock_bh(&iwm->txq[queue].lock);
 
 	queue_work(iwm->txq[queue].wq, &iwm->txq[queue].worker);
 
diff --git a/drivers/net/wireless/iwmc3200wifi/umac.h b/drivers/net/wireless/iwmc3200wifi/umac.h
index c5a14ae..7f54a14 100644
--- a/drivers/net/wireless/iwmc3200wifi/umac.h
+++ b/drivers/net/wireless/iwmc3200wifi/umac.h
@@ -83,6 +83,20 @@
 	((UMAC_HDI_ACT_TBL_IDX_RA_UMAC << UMAC_HDI_ACT_TBL_IDX_RA_POS) |\
 	(UMAC_HDI_ACT_TBL_IDX_TID_LMAC << UMAC_HDI_ACT_TBL_IDX_TID_POS))
 
+/* STA ID and color */
+#define STA_ID_SEED                        (0x0f)
+#define STA_ID_POS                         (0)
+#define STA_ID_MSK                         (STA_ID_SEED << STA_ID_POS)
+
+#define STA_COLOR_SEED                     (0x7)
+#define STA_COLOR_POS                      (4)
+#define STA_COLOR_MSK                      (STA_COLOR_SEED << STA_COLOR_POS)
+
+#define STA_ID_N_COLOR_COLOR(id_n_color) \
+	(((id_n_color) & STA_COLOR_MSK) >> STA_COLOR_POS)
+#define STA_ID_N_COLOR_ID(id_n_color) \
+	(((id_n_color) & STA_ID_MSK) >> STA_ID_POS)
+
 /* iwm_umac_notif_alive.page_grp_state Group number -- bits [3:0] */
 #define UMAC_ALIVE_PAGE_STS_GRP_NUM_POS		0
 #define UMAC_ALIVE_PAGE_STS_GRP_NUM_SEED	0xF
@@ -260,6 +274,9 @@
 #define UMAC_CMD_OPCODE_GET_CHAN_INFO_LIST	0x16
 #define UMAC_CMD_OPCODE_SET_PARAM_LIST		0x17
 #define UMAC_CMD_OPCODE_GET_PARAM_LIST		0x18
+#define UMAC_CMD_OPCODE_STOP_RESUME_STA_TX      0x19
+#define UMAC_CMD_OPCODE_TEST_BLOCK_ACK          0x1A
+
 #define UMAC_CMD_OPCODE_BASE_WRAPPER            0xFA
 #define UMAC_CMD_OPCODE_LMAC_WRAPPER            0xFB
 #define UMAC_CMD_OPCODE_HW_TEST_WRAPPER         0xFC
@@ -281,6 +298,7 @@
 #define UMAC_WIFI_IF_CMD_GLOBAL_TX_KEY_ID                0x1B
 #define UMAC_WIFI_IF_CMD_SET_HOST_EXTENDED_IE            0x1C
 #define UMAC_WIFI_IF_CMD_GET_SUPPORTED_CHANNELS          0x1E
+#define UMAC_WIFI_IF_CMD_PMKID_UPDATE                    0x1F
 #define UMAC_WIFI_IF_CMD_TX_PWR_TRIGGER                  0x20
 
 /* UMAC WiFi interface ports */
@@ -687,19 +705,24 @@
 /* Tx/Rx rates window (number of max of last update window per second) */
 #define UMAC_NTF_RATE_SAMPLE_NR	4
 
+/* Max numbers of bits required to go through all antennae in bitmasks */
+#define UMAC_PHY_NUM_CHAINS     3
+
 #define IWM_UMAC_MGMT_TID	8
-#define IWM_UMAC_TID_NR		8
+#define IWM_UMAC_TID_NR		9 /* 8 TIDs + MGMT */
 
 struct iwm_umac_notif_stats {
 	struct iwm_umac_wifi_in_hdr hdr;
 	__le32 flags;
 	__le32 timestamp;
-	__le16 tid_load[IWM_UMAC_TID_NR + 2]; /* 1 non-QoS + 1 dword align */
+	__le16 tid_load[IWM_UMAC_TID_NR + 1]; /* 1 non-QoS + 1 dword align */
 	__le16 tx_rate[UMAC_NTF_RATE_SAMPLE_NR];
 	__le16 rx_rate[UMAC_NTF_RATE_SAMPLE_NR];
+	__le32 chain_energy[UMAC_PHY_NUM_CHAINS];
 	s32 rssi_dbm;
 	s32 noise_dbm;
 	__le32 supp_rates;
+	__le32 supp_ht_rates;
 	__le32 missed_beacons;
 	__le32 rx_beacons;
 	__le32 rx_dir_pkts;
@@ -737,6 +760,20 @@
 	__le32 roam_ap_loadblance;
 } __attribute__ ((packed));
 
+#define UMAC_STOP_TX_FLAG    0x1
+#define UMAC_RESUME_TX_FLAG  0x2
+
+#define LAST_SEQ_NUM_INVALID     0xFFFF
+
+struct iwm_umac_notif_stop_resume_tx {
+	struct iwm_umac_wifi_in_hdr hdr;
+	u8 flags; /* UMAC_*_TX_FLAG_* */
+	u8 sta_id;
+	__le16 stop_resume_tid_msk; /* tid bitmask */
+} __attribute__ ((packed));
+
+#define UMAC_MAX_NUM_PMKIDS 4
+
 /* WiFi interface wrapper header */
 struct iwm_umac_wifi_if {
 	u8 oid;
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
deleted file mode 100644
index 5c69681..0000000
--- a/drivers/net/wireless/libertas/11d.c
+++ /dev/null
@@ -1,696 +0,0 @@
-/**
-  * This file contains functions for 802.11D.
-  */
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/wireless.h>
-
-#include "host.h"
-#include "decl.h"
-#include "11d.h"
-#include "dev.h"
-#include "wext.h"
-
-#define TX_PWR_DEFAULT	10
-
-static struct region_code_mapping region_code_mapping[] = {
-	{"US ", 0x10},		/* US FCC      */
-	{"CA ", 0x10},		/* IC Canada   */
-	{"SG ", 0x10},		/* Singapore   */
-	{"EU ", 0x30},		/* ETSI        */
-	{"AU ", 0x30},		/* Australia   */
-	{"KR ", 0x30},		/* Republic Of Korea */
-	{"ES ", 0x31},		/* Spain       */
-	{"FR ", 0x32},		/* France      */
-	{"JP ", 0x40},		/* Japan       */
-};
-
-/* Following 2 structure defines the supported channels */
-static struct chan_freq_power channel_freq_power_UN_BG[] = {
-	{1, 2412, TX_PWR_DEFAULT},
-	{2, 2417, TX_PWR_DEFAULT},
-	{3, 2422, TX_PWR_DEFAULT},
-	{4, 2427, TX_PWR_DEFAULT},
-	{5, 2432, TX_PWR_DEFAULT},
-	{6, 2437, TX_PWR_DEFAULT},
-	{7, 2442, TX_PWR_DEFAULT},
-	{8, 2447, TX_PWR_DEFAULT},
-	{9, 2452, TX_PWR_DEFAULT},
-	{10, 2457, TX_PWR_DEFAULT},
-	{11, 2462, TX_PWR_DEFAULT},
-	{12, 2467, TX_PWR_DEFAULT},
-	{13, 2472, TX_PWR_DEFAULT},
-	{14, 2484, TX_PWR_DEFAULT}
-};
-
-static u8 lbs_region_2_code(u8 *region)
-{
-	u8 i;
-
-	for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
-		region[i] = toupper(region[i]);
-
-	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
-		if (!memcmp(region, region_code_mapping[i].region,
-			    COUNTRY_CODE_LEN))
-			return (region_code_mapping[i].code);
-	}
-
-	/* default is US */
-	return (region_code_mapping[0].code);
-}
-
-static u8 *lbs_code_2_region(u8 code)
-{
-	u8 i;
-
-	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
-		if (region_code_mapping[i].code == code)
-			return (region_code_mapping[i].region);
-	}
-	/* default is US */
-	return (region_code_mapping[0].region);
-}
-
-/**
- *  @brief This function finds the nrchan-th chan after the firstchan
- *  @param band       band
- *  @param firstchan  first channel number
- *  @param nrchan   number of channels
- *  @return 	      the nrchan-th chan number
-*/
-static u8 lbs_get_chan_11d(u8 firstchan, u8 nrchan, u8 *chan)
-/*find the nrchan-th chan after the firstchan*/
-{
-	u8 i;
-	struct chan_freq_power *cfp;
-	u8 cfp_no;
-
-	cfp = channel_freq_power_UN_BG;
-	cfp_no = ARRAY_SIZE(channel_freq_power_UN_BG);
-
-	for (i = 0; i < cfp_no; i++) {
-		if ((cfp + i)->channel == firstchan) {
-			lbs_deb_11d("firstchan found\n");
-			break;
-		}
-	}
-
-	if (i < cfp_no) {
-		/*if beyond the boundary */
-		if (i + nrchan < cfp_no) {
-			*chan = (cfp + i + nrchan)->channel;
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *  @brief This function Checks if chan txpwr is learned from AP/IBSS
- *  @param chan                 chan number
- *  @param parsed_region_chan   pointer to parsed_region_chan_11d
- *  @return 	                TRUE; FALSE
-*/
-static u8 lbs_channel_known_11d(u8 chan,
-			  struct parsed_region_chan_11d * parsed_region_chan)
-{
-	struct chan_power_11d *chanpwr = parsed_region_chan->chanpwr;
-	u8 nr_chan = parsed_region_chan->nr_chan;
-	u8 i = 0;
-
-	lbs_deb_hex(LBS_DEB_11D, "parsed_region_chan", (char *)chanpwr,
-		sizeof(struct chan_power_11d) * nr_chan);
-
-	for (i = 0; i < nr_chan; i++) {
-		if (chan == chanpwr[i].chan) {
-			lbs_deb_11d("found chan %d\n", chan);
-			return 1;
-		}
-	}
-
-	lbs_deb_11d("chan %d not found\n", chan);
-	return 0;
-}
-
-u32 lbs_chan_2_freq(u8 chan)
-{
-	struct chan_freq_power *cf;
-	u16 i;
-	u32 freq = 0;
-
-	cf = channel_freq_power_UN_BG;
-
-	for (i = 0; i < ARRAY_SIZE(channel_freq_power_UN_BG); i++) {
-		if (chan == cf[i].channel)
-			freq = cf[i].freq;
-	}
-
-	return freq;
-}
-
-static int generate_domain_info_11d(struct parsed_region_chan_11d
-				  *parsed_region_chan,
-				  struct lbs_802_11d_domain_reg *domaininfo)
-{
-	u8 nr_subband = 0;
-
-	u8 nr_chan = parsed_region_chan->nr_chan;
-	u8 nr_parsedchan = 0;
-
-	u8 firstchan = 0, nextchan = 0, maxpwr = 0;
-
-	u8 i, flag = 0;
-
-	memcpy(domaininfo->countrycode, parsed_region_chan->countrycode,
-	       COUNTRY_CODE_LEN);
-
-	lbs_deb_11d("nrchan %d\n", nr_chan);
-	lbs_deb_hex(LBS_DEB_11D, "parsed_region_chan", (char *)parsed_region_chan,
-		sizeof(struct parsed_region_chan_11d));
-
-	for (i = 0; i < nr_chan; i++) {
-		if (!flag) {
-			flag = 1;
-			nextchan = firstchan =
-			    parsed_region_chan->chanpwr[i].chan;
-			maxpwr = parsed_region_chan->chanpwr[i].pwr;
-			nr_parsedchan = 1;
-			continue;
-		}
-
-		if (parsed_region_chan->chanpwr[i].chan == nextchan + 1 &&
-		    parsed_region_chan->chanpwr[i].pwr == maxpwr) {
-			nextchan++;
-			nr_parsedchan++;
-		} else {
-			domaininfo->subband[nr_subband].firstchan = firstchan;
-			domaininfo->subband[nr_subband].nrchan =
-			    nr_parsedchan;
-			domaininfo->subband[nr_subband].maxtxpwr = maxpwr;
-			nr_subband++;
-			nextchan = firstchan =
-			    parsed_region_chan->chanpwr[i].chan;
-			maxpwr = parsed_region_chan->chanpwr[i].pwr;
-		}
-	}
-
-	if (flag) {
-		domaininfo->subband[nr_subband].firstchan = firstchan;
-		domaininfo->subband[nr_subband].nrchan = nr_parsedchan;
-		domaininfo->subband[nr_subband].maxtxpwr = maxpwr;
-		nr_subband++;
-	}
-	domaininfo->nr_subband = nr_subband;
-
-	lbs_deb_11d("nr_subband=%x\n", domaininfo->nr_subband);
-	lbs_deb_hex(LBS_DEB_11D, "domaininfo", (char *)domaininfo,
-		COUNTRY_CODE_LEN + 1 +
-		sizeof(struct ieee_subbandset) * nr_subband);
-	return 0;
-}
-
-/**
- *  @brief This function generates parsed_region_chan from Domain Info learned from AP/IBSS
- *  @param region_chan          pointer to struct region_channel
- *  @param *parsed_region_chan  pointer to parsed_region_chan_11d
- *  @return 	                N/A
-*/
-static void lbs_generate_parsed_region_chan_11d(struct region_channel *region_chan,
-					  struct parsed_region_chan_11d *
-					  parsed_region_chan)
-{
-	u8 i;
-	struct chan_freq_power *cfp;
-
-	if (region_chan == NULL) {
-		lbs_deb_11d("region_chan is NULL\n");
-		return;
-	}
-
-	cfp = region_chan->CFP;
-	if (cfp == NULL) {
-		lbs_deb_11d("cfp is NULL \n");
-		return;
-	}
-
-	parsed_region_chan->band = region_chan->band;
-	parsed_region_chan->region = region_chan->region;
-	memcpy(parsed_region_chan->countrycode,
-	       lbs_code_2_region(region_chan->region), COUNTRY_CODE_LEN);
-
-	lbs_deb_11d("region 0x%x, band %d\n", parsed_region_chan->region,
-	       parsed_region_chan->band);
-
-	for (i = 0; i < region_chan->nrcfp; i++, cfp++) {
-		parsed_region_chan->chanpwr[i].chan = cfp->channel;
-		parsed_region_chan->chanpwr[i].pwr = cfp->maxtxpower;
-		lbs_deb_11d("chan %d, pwr %d\n",
-		       parsed_region_chan->chanpwr[i].chan,
-		       parsed_region_chan->chanpwr[i].pwr);
-	}
-	parsed_region_chan->nr_chan = region_chan->nrcfp;
-
-	lbs_deb_11d("nrchan %d\n", parsed_region_chan->nr_chan);
-
-	return;
-}
-
-/**
- *  @brief generate parsed_region_chan from Domain Info learned from AP/IBSS
- *  @param region               region ID
- *  @param band                 band
- *  @param chan                 chan
- *  @return 	                TRUE;FALSE
-*/
-static u8 lbs_region_chan_supported_11d(u8 region, u8 chan)
-{
-	struct chan_freq_power *cfp;
-	int cfp_no;
-	u8 idx;
-	int ret = 0;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	cfp = lbs_get_region_cfp_table(region, &cfp_no);
-	if (cfp == NULL)
-		return 0;
-
-	for (idx = 0; idx < cfp_no; idx++) {
-		if (chan == (cfp + idx)->channel) {
-			/* If Mrvl Chip Supported? */
-			if ((cfp + idx)->unsupported) {
-				ret = 0;
-			} else {
-				ret = 1;
-			}
-			goto done;
-		}
-	}
-
-	/*chan is not in the region table */
-
-done:
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
-
-/**
- *  @brief This function checks if chan txpwr is learned from AP/IBSS
- *  @param chan                 chan number
- *  @param parsed_region_chan   pointer to parsed_region_chan_11d
- *  @return 	                0
-*/
-static int parse_domain_info_11d(struct ieee_ie_country_info_full_set *countryinfo,
-				 u8 band,
-				 struct parsed_region_chan_11d *parsed_region_chan)
-{
-	u8 nr_subband, nrchan;
-	u8 lastchan, firstchan;
-	u8 region;
-	u8 curchan = 0;
-
-	u8 idx = 0;		/*chan index in parsed_region_chan */
-
-	u8 j, i;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	/*validation Rules:
-	   1. valid region Code
-	   2. First Chan increment
-	   3. channel range no overlap
-	   4. channel is valid?
-	   5. channel is supported by region?
-	   6. Others
-	 */
-
-	lbs_deb_hex(LBS_DEB_11D, "countryinfo", (u8 *) countryinfo, 30);
-
-	if ((*(countryinfo->countrycode)) == 0
-	    || (countryinfo->header.len <= COUNTRY_CODE_LEN)) {
-		/* No region Info or Wrong region info: treat as No 11D info */
-		goto done;
-	}
-
-	/*Step1: check region_code */
-	parsed_region_chan->region = region =
-	    lbs_region_2_code(countryinfo->countrycode);
-
-	lbs_deb_11d("regioncode=%x\n", (u8) parsed_region_chan->region);
-	lbs_deb_hex(LBS_DEB_11D, "countrycode", (char *)countryinfo->countrycode,
-		COUNTRY_CODE_LEN);
-
-	parsed_region_chan->band = band;
-
-	memcpy(parsed_region_chan->countrycode, countryinfo->countrycode,
-	       COUNTRY_CODE_LEN);
-
-	nr_subband = (countryinfo->header.len - COUNTRY_CODE_LEN) /
-	    sizeof(struct ieee_subbandset);
-
-	for (j = 0, lastchan = 0; j < nr_subband; j++) {
-
-		if (countryinfo->subband[j].firstchan <= lastchan) {
-			/*Step2&3. Check First Chan Num increment and no overlap */
-			lbs_deb_11d("chan %d>%d, overlap\n",
-			       countryinfo->subband[j].firstchan, lastchan);
-			continue;
-		}
-
-		firstchan = countryinfo->subband[j].firstchan;
-		nrchan = countryinfo->subband[j].nrchan;
-
-		for (i = 0; idx < MAX_NO_OF_CHAN && i < nrchan; i++) {
-			/*step4: channel is supported? */
-
-			if (!lbs_get_chan_11d(firstchan, i, &curchan)) {
-				/* Chan is not found in UN table */
-				lbs_deb_11d("chan is not supported: %d \n", i);
-				break;
-			}
-
-			lastchan = curchan;
-
-			if (lbs_region_chan_supported_11d(region, curchan)) {
-				/*step5: Check if curchan is supported by mrvl in region */
-				parsed_region_chan->chanpwr[idx].chan = curchan;
-				parsed_region_chan->chanpwr[idx].pwr =
-				    countryinfo->subband[j].maxtxpwr;
-				idx++;
-			} else {
-				/*not supported and ignore the chan */
-				lbs_deb_11d(
-				       "i %d, chan %d unsupported in region %x, band %d\n",
-				       i, curchan, region, band);
-			}
-		}
-
-		/*Step6: Add other checking if any */
-
-	}
-
-	parsed_region_chan->nr_chan = idx;
-
-	lbs_deb_11d("nrchan=%x\n", parsed_region_chan->nr_chan);
-	lbs_deb_hex(LBS_DEB_11D, "parsed_region_chan", (u8 *) parsed_region_chan,
-		2 + COUNTRY_CODE_LEN + sizeof(struct parsed_region_chan_11d) * idx);
-
-done:
-	lbs_deb_enter(LBS_DEB_11D);
-	return 0;
-}
-
-/**
- *  @brief This function calculates the scan type for channels
- *  @param chan                 chan number
- *  @param parsed_region_chan   pointer to parsed_region_chan_11d
- *  @return 	                PASSIVE if chan is unknown; ACTIVE if chan is known
-*/
-u8 lbs_get_scan_type_11d(u8 chan,
-			  struct parsed_region_chan_11d * parsed_region_chan)
-{
-	u8 scan_type = CMD_SCAN_TYPE_PASSIVE;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	if (lbs_channel_known_11d(chan, parsed_region_chan)) {
-		lbs_deb_11d("found, do active scan\n");
-		scan_type = CMD_SCAN_TYPE_ACTIVE;
-	} else {
-		lbs_deb_11d("not found, do passive scan\n");
-	}
-
-	lbs_deb_leave_args(LBS_DEB_11D, "ret scan_type %d", scan_type);
-	return scan_type;
-
-}
-
-void lbs_init_11d(struct lbs_private *priv)
-{
-	priv->enable11d = 0;
-	memset(&(priv->parsed_region_chan), 0,
-	       sizeof(struct parsed_region_chan_11d));
-	return;
-}
-
-/**
- *  @brief This function sets DOMAIN INFO to FW
- *  @param priv       pointer to struct lbs_private
- *  @return 	      0; -1
-*/
-static int set_domain_info_11d(struct lbs_private *priv)
-{
-	int ret;
-
-	if (!priv->enable11d) {
-		lbs_deb_11d("dnld domain Info with 11d disabled\n");
-		return 0;
-	}
-
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11D_DOMAIN_INFO,
-				    CMD_ACT_SET,
-				    CMD_OPTION_WAITFORRSP, 0, NULL);
-	if (ret)
-		lbs_deb_11d("fail to dnld domain info\n");
-
-	return ret;
-}
-
-/**
- *  @brief This function setups scan channels
- *  @param priv       pointer to struct lbs_private
- *  @param band       band
- *  @return 	      0
-*/
-int lbs_set_universaltable(struct lbs_private *priv, u8 band)
-{
-	u16 size = sizeof(struct chan_freq_power);
-	u16 i = 0;
-
-	memset(priv->universal_channel, 0,
-	       sizeof(priv->universal_channel));
-
-	priv->universal_channel[i].nrcfp =
-	    sizeof(channel_freq_power_UN_BG) / size;
-	lbs_deb_11d("BG-band nrcfp %d\n",
-	       priv->universal_channel[i].nrcfp);
-
-	priv->universal_channel[i].CFP = channel_freq_power_UN_BG;
-	priv->universal_channel[i].valid = 1;
-	priv->universal_channel[i].region = UNIVERSAL_REGION_CODE;
-	priv->universal_channel[i].band = band;
-	i++;
-
-	return 0;
-}
-
-/**
- *  @brief This function implements command CMD_802_11D_DOMAIN_INFO
- *  @param priv       pointer to struct lbs_private
- *  @param cmd        pointer to cmd buffer
- *  @param cmdno      cmd ID
- *  @param cmdOption  cmd action
- *  @return 	      0
-*/
-int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
-				 struct cmd_ds_command *cmd, u16 cmdno,
-				 u16 cmdoption)
-{
-	struct cmd_ds_802_11d_domain_info *pdomaininfo =
-	    &cmd->params.domaininfo;
-	struct mrvl_ie_domain_param_set *domain = &pdomaininfo->domain;
-	u8 nr_subband = priv->domainreg.nr_subband;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	lbs_deb_11d("nr_subband=%x\n", nr_subband);
-
-	cmd->command = cpu_to_le16(cmdno);
-	pdomaininfo->action = cpu_to_le16(cmdoption);
-	if (cmdoption == CMD_ACT_GET) {
-		cmd->size =
-		    cpu_to_le16(sizeof(pdomaininfo->action) + S_DS_GEN);
-		lbs_deb_hex(LBS_DEB_11D, "802_11D_DOMAIN_INFO", (u8 *) cmd,
-			le16_to_cpu(cmd->size));
-		goto done;
-	}
-
-	domain->header.type = cpu_to_le16(TLV_TYPE_DOMAIN);
-	memcpy(domain->countrycode, priv->domainreg.countrycode,
-	       sizeof(domain->countrycode));
-
-	domain->header.len =
-	    cpu_to_le16(nr_subband * sizeof(struct ieee_subbandset) +
-			     sizeof(domain->countrycode));
-
-	if (nr_subband) {
-		memcpy(domain->subband, priv->domainreg.subband,
-		       nr_subband * sizeof(struct ieee_subbandset));
-
-		cmd->size = cpu_to_le16(sizeof(pdomaininfo->action) +
-					     le16_to_cpu(domain->header.len) +
-					     sizeof(struct mrvl_ie_header) +
-					     S_DS_GEN);
-	} else {
-		cmd->size =
-		    cpu_to_le16(sizeof(pdomaininfo->action) + S_DS_GEN);
-	}
-
-	lbs_deb_hex(LBS_DEB_11D, "802_11D_DOMAIN_INFO", (u8 *) cmd, le16_to_cpu(cmd->size));
-
-done:
-	lbs_deb_enter(LBS_DEB_11D);
-	return 0;
-}
-
-/**
- *  @brief This function parses countryinfo from AP and download country info to FW
- *  @param priv    pointer to struct lbs_private
- *  @param resp    pointer to command response buffer
- *  @return 	   0; -1
- */
-int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11d_domain_info *domaininfo = &resp->params.domaininforesp;
-	struct mrvl_ie_domain_param_set *domain = &domaininfo->domain;
-	u16 action = le16_to_cpu(domaininfo->action);
-	s16 ret = 0;
-	u8 nr_subband = 0;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	lbs_deb_hex(LBS_DEB_11D, "domain info resp", (u8 *) resp,
-		(int)le16_to_cpu(resp->size));
-
-	nr_subband = (le16_to_cpu(domain->header.len) - COUNTRY_CODE_LEN) /
-		      sizeof(struct ieee_subbandset);
-
-	lbs_deb_11d("domain info resp: nr_subband %d\n", nr_subband);
-
-	if (nr_subband > MRVDRV_MAX_SUBBAND_802_11D) {
-		lbs_deb_11d("Invalid Numrer of Subband returned!!\n");
-		return -1;
-	}
-
-	switch (action) {
-	case CMD_ACT_SET:	/*Proc Set action */
-		break;
-
-	case CMD_ACT_GET:
-		break;
-	default:
-		lbs_deb_11d("Invalid action:%d\n", domaininfo->action);
-		ret = -1;
-		break;
-	}
-
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
-
-/**
- *  @brief This function parses countryinfo from AP and download country info to FW
- *  @param priv    pointer to struct lbs_private
- *  @return 	   0; -1
- */
-int lbs_parse_dnld_countryinfo_11d(struct lbs_private *priv,
-                                        struct bss_descriptor * bss)
-{
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_11D);
-	if (priv->enable11d) {
-		memset(&priv->parsed_region_chan, 0,
-		       sizeof(struct parsed_region_chan_11d));
-		ret = parse_domain_info_11d(&bss->countryinfo, 0,
-					       &priv->parsed_region_chan);
-
-		if (ret == -1) {
-			lbs_deb_11d("error parsing domain_info from AP\n");
-			goto done;
-		}
-
-		memset(&priv->domainreg, 0,
-		       sizeof(struct lbs_802_11d_domain_reg));
-		generate_domain_info_11d(&priv->parsed_region_chan,
-				      &priv->domainreg);
-
-		ret = set_domain_info_11d(priv);
-
-		if (ret) {
-			lbs_deb_11d("error setting domain info\n");
-			goto done;
-		}
-	}
-	ret = 0;
-
-done:
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
-
-/**
- *  @brief This function generates 11D info from user specified regioncode and download to FW
- *  @param priv    pointer to struct lbs_private
- *  @return 	   0; -1
- */
-int lbs_create_dnld_countryinfo_11d(struct lbs_private *priv)
-{
-	int ret;
-	struct region_channel *region_chan;
-	u8 j;
-
-	lbs_deb_enter(LBS_DEB_11D);
-	lbs_deb_11d("curbssparams.band %d\n", priv->curbssparams.band);
-
-	if (priv->enable11d) {
-		/* update parsed_region_chan_11; dnld domaininf to FW */
-
-		for (j = 0; j < ARRAY_SIZE(priv->region_channel); j++) {
-			region_chan = &priv->region_channel[j];
-
-			lbs_deb_11d("%d region_chan->band %d\n", j,
-			       region_chan->band);
-
-			if (!region_chan || !region_chan->valid
-			    || !region_chan->CFP)
-				continue;
-			if (region_chan->band != priv->curbssparams.band)
-				continue;
-			break;
-		}
-
-		if (j >= ARRAY_SIZE(priv->region_channel)) {
-			lbs_deb_11d("region_chan not found, band %d\n",
-			       priv->curbssparams.band);
-			ret = -1;
-			goto done;
-		}
-
-		memset(&priv->parsed_region_chan, 0,
-		       sizeof(struct parsed_region_chan_11d));
-		lbs_generate_parsed_region_chan_11d(region_chan,
-						     &priv->
-						     parsed_region_chan);
-
-		memset(&priv->domainreg, 0,
-		       sizeof(struct lbs_802_11d_domain_reg));
-		generate_domain_info_11d(&priv->parsed_region_chan,
-					 &priv->domainreg);
-
-		ret = set_domain_info_11d(priv);
-
-		if (ret) {
-			lbs_deb_11d("error setting domain info\n");
-			goto done;
-		}
-
-	}
-	ret = 0;
-
-done:
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
diff --git a/drivers/net/wireless/libertas/11d.h b/drivers/net/wireless/libertas/11d.h
deleted file mode 100644
index fb75d3e..0000000
--- a/drivers/net/wireless/libertas/11d.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/**
-  * This header file contains data structures and
-  * function declarations of 802.11d
-  */
-#ifndef _LBS_11D_
-#define _LBS_11D_
-
-#include "types.h"
-#include "defs.h"
-
-#define UNIVERSAL_REGION_CODE			0xff
-
-/** (Beaconsize(256)-5(IEId,len,contrystr(3))/3(FirstChan,NoOfChan,MaxPwr)
- */
-#define MRVDRV_MAX_SUBBAND_802_11D		83
-
-#define COUNTRY_CODE_LEN			3
-#define MAX_NO_OF_CHAN 				40
-
-struct cmd_ds_command;
-
-/** Data structure for Country IE*/
-struct ieee_subbandset {
-	u8 firstchan;
-	u8 nrchan;
-	u8 maxtxpwr;
-} __attribute__ ((packed));
-
-struct ieee_ie_country_info_set {
-	struct ieee_ie_header header;
-
-	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieee_subbandset subband[1];
-};
-
-struct ieee_ie_country_info_full_set {
-	struct ieee_ie_header header;
-
-	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
-} __attribute__ ((packed));
-
-struct mrvl_ie_domain_param_set {
-	struct mrvl_ie_header header;
-
-	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieee_subbandset subband[1];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11d_domain_info {
-	__le16 action;
-	struct mrvl_ie_domain_param_set domain;
-} __attribute__ ((packed));
-
-/** domain regulatory information */
-struct lbs_802_11d_domain_reg {
-	/** country Code*/
-	u8 countrycode[COUNTRY_CODE_LEN];
-	/** No. of subband*/
-	u8 nr_subband;
-	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
-};
-
-struct chan_power_11d {
-	u8 chan;
-	u8 pwr;
-} __attribute__ ((packed));
-
-struct parsed_region_chan_11d {
-	u8 band;
-	u8 region;
-	s8 countrycode[COUNTRY_CODE_LEN];
-	struct chan_power_11d chanpwr[MAX_NO_OF_CHAN];
-	u8 nr_chan;
-} __attribute__ ((packed));
-
-struct region_code_mapping {
-	u8 region[COUNTRY_CODE_LEN];
-	u8 code;
-};
-
-struct lbs_private;
-
-u8 lbs_get_scan_type_11d(u8 chan,
-			  struct parsed_region_chan_11d *parsed_region_chan);
-
-u32 lbs_chan_2_freq(u8 chan);
-
-void lbs_init_11d(struct lbs_private *priv);
-
-int lbs_set_universaltable(struct lbs_private *priv, u8 band);
-
-int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
-				 struct cmd_ds_command *cmd, u16 cmdno,
-				 u16 cmdOption);
-
-int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp);
-
-struct bss_descriptor;
-int lbs_parse_dnld_countryinfo_11d(struct lbs_private *priv,
-                                        struct bss_descriptor * bss);
-
-int lbs_create_dnld_countryinfo_11d(struct lbs_private *priv);
-
-#endif
diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig
new file mode 100644
index 0000000..30aa9d4
--- /dev/null
+++ b/drivers/net/wireless/libertas/Kconfig
@@ -0,0 +1,39 @@
+config LIBERTAS
+	tristate "Marvell 8xxx Libertas WLAN driver support"
+	depends on CFG80211
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select LIB80211
+	select FW_LOADER
+	---help---
+	  A library for Marvell Libertas 8xxx devices.
+
+config LIBERTAS_USB
+	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
+	depends on LIBERTAS && USB
+	---help---
+	  A driver for Marvell Libertas 8388 USB devices.
+
+config LIBERTAS_CS
+	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+	depends on LIBERTAS && PCMCIA
+	---help---
+	  A driver for Marvell Libertas 8385 CompactFlash devices.
+
+config LIBERTAS_SDIO
+	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
+	depends on LIBERTAS && MMC
+	---help---
+	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
+
+config LIBERTAS_SPI
+	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
+	depends on LIBERTAS && SPI
+	---help---
+	  A driver for Marvell Libertas 8686 SPI devices.
+
+config LIBERTAS_DEBUG
+	bool "Enable full debugging output in the Libertas module."
+	depends on LIBERTAS
+	---help---
+	  Debugging support.
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index 0b69185..b188cd9 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -1,5 +1,15 @@
-libertas-objs := main.o wext.o rx.o tx.o cmd.o cmdresp.o scan.o 11d.o	\
-		 debugfs.o persistcfg.o ethtool.o assoc.o
+libertas-y += assoc.o
+libertas-y += cfg.o
+libertas-y += cmd.o
+libertas-y += cmdresp.o
+libertas-y += debugfs.o
+libertas-y += ethtool.o
+libertas-y += main.o
+libertas-y += mesh.o
+libertas-y += rx.o
+libertas-y += scan.o
+libertas-y += tx.o
+libertas-y += wext.o
 
 usb8xxx-objs += if_usb.o
 libertas_cs-objs += if_cs.o
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index ab6a2d5..2726c04 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -1,5 +1,5 @@
 ================================================================================
-			README for USB8388
+			README for Libertas
 
  (c) Copyright © 2003-2006, Marvell International Ltd.
  All Rights Reserved
@@ -226,4 +226,28 @@
     All entries in the scan table (not just the new scan data when keep=1)
     will be displayed upon completion by use of the getscantable ioctl.
 
+========================
+IWCONFIG COMMANDS
+========================
+power period
+
+	This command is used to configure the station in deep sleep mode /
+	auto deep sleep mode.
+
+	The timer is implemented to monitor the activities (command, event,
+	etc.). When an activity is detected station will exit from deep
+	sleep mode automatically and restart the timer. At timer expiry
+	(no activity for defined time period) the deep sleep mode is entered
+	automatically.
+
+	Note: this command is for SDIO interface only.
+
+	Usage:
+	To enable deep sleep mode do:
+		iwconfig wlan0 power period 0
+	To enable auto deep sleep mode with idle time period 5 seconds do:
+		iwconfig wlan0 power period 5
+	To disable deep sleep/auto deep sleep mode do:
+		iwconfig wlan0 power period -1
+
 ==============================================================================
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index dd87326..7510673 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -23,6 +23,13 @@
  */
 #define CAPINFO_MASK	(~(0xda00))
 
+/**
+ * 802.11b/g supported bitrates (in 500Kb/s units)
+ */
+u8 lbs_bg_rates[MAX_RATES] =
+    { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
+0x00, 0x00 };
+
 
 /**
  *  @brief This function finds common rates between rates and card rates.
@@ -147,6 +154,397 @@
 }
 
 
+int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
+			   struct assoc_request *assoc)
+{
+	struct cmd_ds_802_11_set_wep cmd;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.hdr.command = cpu_to_le16(CMD_802_11_SET_WEP);
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	cmd.action = cpu_to_le16(cmd_action);
+
+	if (cmd_action == CMD_ACT_ADD) {
+		int i;
+
+		/* default tx key index */
+		cmd.keyindex = cpu_to_le16(assoc->wep_tx_keyidx &
+					   CMD_WEP_KEY_INDEX_MASK);
+
+		/* Copy key types and material to host command structure */
+		for (i = 0; i < 4; i++) {
+			struct enc_key *pkey = &assoc->wep_keys[i];
+
+			switch (pkey->len) {
+			case KEY_LEN_WEP_40:
+				cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
+				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
+				lbs_deb_cmd("SET_WEP: add key %d (40 bit)\n", i);
+				break;
+			case KEY_LEN_WEP_104:
+				cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
+				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
+				lbs_deb_cmd("SET_WEP: add key %d (104 bit)\n", i);
+				break;
+			case 0:
+				break;
+			default:
+				lbs_deb_cmd("SET_WEP: invalid key %d, length %d\n",
+					    i, pkey->len);
+				ret = -1;
+				goto done;
+				break;
+			}
+		}
+	} else if (cmd_action == CMD_ACT_REMOVE) {
+		/* ACT_REMOVE clears _all_ WEP keys */
+
+		/* default tx key index */
+		cmd.keyindex = cpu_to_le16(priv->wep_tx_keyidx &
+					   CMD_WEP_KEY_INDEX_MASK);
+		lbs_deb_cmd("SET_WEP: remove key %d\n", priv->wep_tx_keyidx);
+	}
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
+done:
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
+			      uint16_t *enable)
+{
+	struct cmd_ds_802_11_enable_rsn cmd;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+	cmd.action = cpu_to_le16(cmd_action);
+
+	if (cmd_action == CMD_ACT_GET)
+		cmd.enable = 0;
+	else {
+		if (*enable)
+			cmd.enable = cpu_to_le16(CMD_ENABLE_RSN);
+		else
+			cmd.enable = cpu_to_le16(CMD_DISABLE_RSN);
+		lbs_deb_cmd("ENABLE_RSN: %d\n", *enable);
+	}
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);
+	if (!ret && cmd_action == CMD_ACT_GET)
+		*enable = le16_to_cpu(cmd.enable);
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+static void set_one_wpa_key(struct MrvlIEtype_keyParamSet *keyparam,
+		struct enc_key *key)
+{
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (key->flags & KEY_INFO_WPA_ENABLED)
+		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_ENABLED);
+	if (key->flags & KEY_INFO_WPA_UNICAST)
+		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_UNICAST);
+	if (key->flags & KEY_INFO_WPA_MCAST)
+		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_MCAST);
+
+	keyparam->type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
+	keyparam->keytypeid = cpu_to_le16(key->type);
+	keyparam->keylen = cpu_to_le16(key->len);
+	memcpy(keyparam->key, key->key, key->len);
+
+	/* Length field doesn't include the {type,length} header */
+	keyparam->length = cpu_to_le16(sizeof(*keyparam) - 4);
+	lbs_deb_leave(LBS_DEB_CMD);
+}
+
+int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
+				struct assoc_request *assoc)
+{
+	struct cmd_ds_802_11_key_material cmd;
+	int ret = 0;
+	int index = 0;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	cmd.action = cpu_to_le16(cmd_action);
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	if (cmd_action == CMD_ACT_GET) {
+		cmd.hdr.size = cpu_to_le16(sizeof(struct cmd_header) + 2);
+	} else {
+		memset(cmd.keyParamSet, 0, sizeof(cmd.keyParamSet));
+
+		if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc->flags)) {
+			set_one_wpa_key(&cmd.keyParamSet[index],
+					&assoc->wpa_unicast_key);
+			index++;
+		}
+
+		if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc->flags)) {
+			set_one_wpa_key(&cmd.keyParamSet[index],
+					&assoc->wpa_mcast_key);
+			index++;
+		}
+
+		/* The common header and as many keys as we included */
+		cmd.hdr.size = cpu_to_le16(offsetof(typeof(cmd),
+						    keyParamSet[index]));
+	}
+	ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);
+	/* Copy the returned key to driver private data */
+	if (!ret && cmd_action == CMD_ACT_GET) {
+		void *buf_ptr = cmd.keyParamSet;
+		void *resp_end = &(&cmd)[1];
+
+		while (buf_ptr < resp_end) {
+			struct MrvlIEtype_keyParamSet *keyparam = buf_ptr;
+			struct enc_key *key;
+			uint16_t param_set_len = le16_to_cpu(keyparam->length);
+			uint16_t key_len = le16_to_cpu(keyparam->keylen);
+			uint16_t key_flags = le16_to_cpu(keyparam->keyinfo);
+			uint16_t key_type = le16_to_cpu(keyparam->keytypeid);
+			void *end;
+
+			end = (void *)keyparam + sizeof(keyparam->type)
+				+ sizeof(keyparam->length) + param_set_len;
+
+			/* Make sure we don't access past the end of the IEs */
+			if (end > resp_end)
+				break;
+
+			if (key_flags & KEY_INFO_WPA_UNICAST)
+				key = &priv->wpa_unicast_key;
+			else if (key_flags & KEY_INFO_WPA_MCAST)
+				key = &priv->wpa_mcast_key;
+			else
+				break;
+
+			/* Copy returned key into driver */
+			memset(key, 0, sizeof(struct enc_key));
+			if (key_len > sizeof(key->key))
+				break;
+			key->type = key_type;
+			key->flags = key_flags;
+			key->len = key_len;
+			memcpy(key->key, keyparam->key, key->len);
+
+			buf_ptr = end + 1;
+		}
+	}
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok)
+{
+/*		Bit  	Rate
+*		15:13 Reserved
+*		12    54 Mbps
+*		11    48 Mbps
+*		10    36 Mbps
+*		9     24 Mbps
+*		8     18 Mbps
+*		7     12 Mbps
+*		6     9 Mbps
+*		5     6 Mbps
+*		4     Reserved
+*		3     11 Mbps
+*		2     5.5 Mbps
+*		1     2 Mbps
+*		0     1 Mbps
+**/
+
+	uint16_t ratemask;
+	int i = lbs_data_rate_to_fw_index(rate);
+	if (lower_rates_ok)
+		ratemask = (0x1fef >> (12 - i));
+	else
+		ratemask = (1 << i);
+	return cpu_to_le16(ratemask);
+}
+
+int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
+				      uint16_t cmd_action)
+{
+	struct cmd_ds_802_11_rate_adapt_rateset cmd;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (!priv->cur_rate && !priv->enablehwauto)
+		return -EINVAL;
+
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	cmd.action = cpu_to_le16(cmd_action);
+	cmd.enablehwauto = cpu_to_le16(priv->enablehwauto);
+	cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto);
+	ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd);
+	if (!ret && cmd_action == CMD_ACT_GET) {
+		priv->ratebitmap = le16_to_cpu(cmd.bitmap);
+		priv->enablehwauto = le16_to_cpu(cmd.enablehwauto);
+	}
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+/**
+ *  @brief Set the data rate
+ *
+ *  @param priv    	A pointer to struct lbs_private structure
+ *  @param rate  	The desired data rate, or 0 to clear a locked rate
+ *
+ *  @return 	   	0 on success, error on failure
+ */
+int lbs_set_data_rate(struct lbs_private *priv, u8 rate)
+{
+	struct cmd_ds_802_11_data_rate cmd;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	if (rate > 0) {
+		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_FIX_RATE);
+		cmd.rates[0] = lbs_data_rate_to_fw_index(rate);
+		if (cmd.rates[0] == 0) {
+			lbs_deb_cmd("DATA_RATE: invalid requested rate of"
+				" 0x%02X\n", rate);
+			ret = 0;
+			goto out;
+		}
+		lbs_deb_cmd("DATA_RATE: set fixed 0x%02X\n", cmd.rates[0]);
+	} else {
+		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_AUTO);
+		lbs_deb_cmd("DATA_RATE: setting auto\n");
+	}
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_DATA_RATE, &cmd);
+	if (ret)
+		goto out;
+
+	lbs_deb_hex(LBS_DEB_CMD, "DATA_RATE_RESP", (u8 *) &cmd, sizeof(cmd));
+
+	/* FIXME: get actual rates FW can do if this command actually returns
+	 * all data rates supported.
+	 */
+	priv->cur_rate = lbs_fw_index_to_data_rate(cmd.rates[0]);
+	lbs_deb_cmd("DATA_RATE: current rate is 0x%02x\n", priv->cur_rate);
+
+out:
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+
+int lbs_cmd_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *cmd)
+{
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	cmd->command = cpu_to_le16(CMD_802_11_RSSI);
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rssi) +
+		sizeof(struct cmd_header));
+	cmd->params.rssi.N = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR);
+
+	/* reset Beacon SNR/NF/RSSI values */
+	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = 0;
+	priv->SNR[TYPE_BEACON][TYPE_AVG] = 0;
+	priv->NF[TYPE_BEACON][TYPE_NOAVG] = 0;
+	priv->NF[TYPE_BEACON][TYPE_AVG] = 0;
+	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = 0;
+	priv->RSSI[TYPE_BEACON][TYPE_AVG] = 0;
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+int lbs_ret_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *resp)
+{
+	struct cmd_ds_802_11_rssi_rsp *rssirsp = &resp->params.rssirsp;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	/* store the non average value */
+	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR);
+	priv->NF[TYPE_BEACON][TYPE_NOAVG] =
+		get_unaligned_le16(&rssirsp->noisefloor);
+
+	priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR);
+	priv->NF[TYPE_BEACON][TYPE_AVG] =
+		get_unaligned_le16(&rssirsp->avgnoisefloor);
+
+	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] =
+	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG],
+		     priv->NF[TYPE_BEACON][TYPE_NOAVG]);
+
+	priv->RSSI[TYPE_BEACON][TYPE_AVG] =
+	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_AVG] / AVG_SCALE,
+		     priv->NF[TYPE_BEACON][TYPE_AVG] / AVG_SCALE);
+
+	lbs_deb_cmd("RSSI: beacon %d, avg %d\n",
+	       priv->RSSI[TYPE_BEACON][TYPE_NOAVG],
+	       priv->RSSI[TYPE_BEACON][TYPE_AVG]);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+
+int lbs_cmd_bcn_ctrl(struct lbs_private *priv,
+				struct cmd_ds_command *cmd,
+				u16 cmd_action)
+{
+	struct cmd_ds_802_11_beacon_control
+		*bcn_ctrl = &cmd->params.bcn_ctrl;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	cmd->size =
+	    cpu_to_le16(sizeof(struct cmd_ds_802_11_beacon_control)
+			     + sizeof(struct cmd_header));
+	cmd->command = cpu_to_le16(CMD_802_11_BEACON_CTRL);
+
+	bcn_ctrl->action = cpu_to_le16(cmd_action);
+	bcn_ctrl->beacon_enable = cpu_to_le16(priv->beacon_enable);
+	bcn_ctrl->beacon_period = cpu_to_le16(priv->beacon_period);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+int lbs_ret_802_11_bcn_ctrl(struct lbs_private *priv,
+					struct cmd_ds_command *resp)
+{
+	struct cmd_ds_802_11_beacon_control *bcn_ctrl =
+	    &resp->params.bcn_ctrl;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (bcn_ctrl->action == CMD_ACT_GET) {
+		priv->beacon_enable = (u8) le16_to_cpu(bcn_ctrl->beacon_enable);
+		priv->beacon_period = le16_to_cpu(bcn_ctrl->beacon_period);
+	}
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	return 0;
+}
+
+
+
 static int lbs_assoc_post(struct lbs_private *priv,
 			  struct cmd_ds_802_11_associate_response *resp)
 {
@@ -226,7 +624,7 @@
 	priv->connect_status = LBS_CONNECTED;
 
 	/* Update current SSID and BSSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IEEE80211_MAX_SSID_LEN);
 	priv->curbssparams.ssid_len = bss->ssid_len;
 	memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
 
@@ -369,12 +767,7 @@
 				   (u16)(pos - (u8 *) &cmd.iebuf));
 
 	/* update curbssparams */
-	priv->curbssparams.channel = bss->phy.ds.channel;
-
-	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
-		ret = -1;
-		goto done;
-	}
+	priv->channel = bss->phy.ds.channel;
 
 	ret = lbs_cmd_with_response(priv, command, &cmd);
 	if (ret == 0) {
@@ -472,7 +865,7 @@
 	memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
 
 	/* Set the new SSID to current SSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IEEE80211_MAX_SSID_LEN);
 	priv->curbssparams.ssid_len = bss->ssid_len;
 
 	netif_carrier_on(priv->dev);
@@ -487,7 +880,7 @@
 	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
 		     print_ssid(ssid, bss->ssid, bss->ssid_len),
 		     priv->curbssparams.bssid,
-		     priv->curbssparams.channel);
+		     priv->channel);
 
 done:
 	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
@@ -560,7 +953,7 @@
 	lbs_deb_join("AdhocJoin: band = %c\n", assoc_req->band);
 
 	priv->adhoccreate = 0;
-	priv->curbssparams.channel = bss->channel;
+	priv->channel = bss->channel;
 
 	/* Build the join command */
 	memset(&cmd, 0, sizeof(cmd));
@@ -633,11 +1026,6 @@
 		}
 	}
 
-	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
-		ret = -1;
-		goto out;
-	}
-
 	ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
 	if (ret == 0) {
 		ret = lbs_adhoc_post(priv,
@@ -737,12 +1125,6 @@
 	lbs_deb_join("ADHOC_START: rates=%02x %02x %02x %02x\n",
 	       cmd.rates[0], cmd.rates[1], cmd.rates[2], cmd.rates[3]);
 
-	if (lbs_create_dnld_countryinfo_11d(priv)) {
-		lbs_deb_join("ADHOC_START: dnld_countryinfo_11d failed\n");
-		ret = -1;
-		goto out;
-	}
-
 	lbs_deb_join("ADHOC_START: Starting Ad-Hoc BSS on channel %d, band %d\n",
 		     assoc_req->channel, assoc_req->band);
 
@@ -1099,7 +1481,7 @@
 			/* else send START command */
 			lbs_deb_assoc("SSID not found, creating adhoc network\n");
 			memcpy(&assoc_req->bss.ssid, &assoc_req->ssid,
-				IW_ESSID_MAX_SIZE);
+				IEEE80211_MAX_SSID_LEN);
 			assoc_req->bss.ssid_len = assoc_req->ssid_len;
 			lbs_adhoc_start(priv, assoc_req);
 		}
@@ -1185,7 +1567,8 @@
 	}
 
 	priv->mode = assoc_req->mode;
-	ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, assoc_req->mode);
+	ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE,
+		assoc_req->mode == IW_MODE_ADHOC ? 2 : 1);
 
 done:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -1205,7 +1588,7 @@
 		goto done;
 	}
 
-	if (assoc_req->channel == priv->curbssparams.channel)
+	if (assoc_req->channel == priv->channel)
 		goto done;
 
 	if (priv->mesh_dev) {
@@ -1217,7 +1600,7 @@
 	}
 
 	lbs_deb_assoc("ASSOC: channel: %d -> %d\n",
-		      priv->curbssparams.channel, assoc_req->channel);
+		      priv->channel, assoc_req->channel);
 
 	ret = lbs_set_channel(priv, assoc_req->channel);
 	if (ret < 0)
@@ -1232,7 +1615,7 @@
 		goto done;
 	}
 
-	if (assoc_req->channel != priv->curbssparams.channel) {
+	if (assoc_req->channel != priv->channel) {
 		lbs_deb_assoc("ASSOC: channel: failed to update channel to %d\n",
 		              assoc_req->channel);
 		goto restore_mesh;
@@ -1253,7 +1636,7 @@
  restore_mesh:
 	if (priv->mesh_dev)
 		lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-				priv->curbssparams.channel);
+				priv->channel);
 
  done:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -1475,7 +1858,7 @@
 	}
 
 	if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) {
-		if (assoc_req->channel != priv->curbssparams.channel)
+		if (assoc_req->channel != priv->channel)
 			return 1;
 	}
 
@@ -1557,7 +1940,7 @@
 
 	found = lbs_find_best_ssid_in_list(priv, preferred_mode);
 	if (found && (found->ssid_len > 0)) {
-		memcpy(out_ssid, &found->ssid, IW_ESSID_MAX_SIZE);
+		memcpy(out_ssid, &found->ssid, IEEE80211_MAX_SSID_LEN);
 		*out_ssid_len = found->ssid_len;
 		*out_mode = found->mode;
 		ret = 0;
@@ -1775,12 +2158,12 @@
 	assoc_req = priv->pending_assoc_req;
 	if (!test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
 		memcpy(&assoc_req->ssid, &priv->curbssparams.ssid,
-		       IW_ESSID_MAX_SIZE);
+		       IEEE80211_MAX_SSID_LEN);
 		assoc_req->ssid_len = priv->curbssparams.ssid_len;
 	}
 
 	if (!test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags))
-		assoc_req->channel = priv->curbssparams.channel;
+		assoc_req->channel = priv->channel;
 
 	if (!test_bit(ASSOC_FLAG_BAND, &assoc_req->flags))
 		assoc_req->band = priv->curbssparams.band;
diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h
index 6e765e9..40621b7 100644
--- a/drivers/net/wireless/libertas/assoc.h
+++ b/drivers/net/wireless/libertas/assoc.h
@@ -3,7 +3,126 @@
 #ifndef _LBS_ASSOC_H_
 #define _LBS_ASSOC_H_
 
-#include "dev.h"
+
+#include "defs.h"
+#include "host.h"
+
+
+struct lbs_private;
+
+/*
+ * In theory, the IE is limited to the IE length, 255,
+ * but in practice 64 bytes are enough.
+ */
+#define MAX_WPA_IE_LEN 64
+
+
+
+struct lbs_802_11_security {
+	u8 WPAenabled;
+	u8 WPA2enabled;
+	u8 wep_enabled;
+	u8 auth_mode;
+	u32 key_mgmt;
+};
+
+/** Current Basic Service Set State Structure */
+struct current_bss_params {
+	/** bssid */
+	u8 bssid[ETH_ALEN];
+	/** ssid */
+	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 ssid_len;
+
+	/** band */
+	u8 band;
+	/** channel is directly in priv->channel */
+	/** zero-terminated array of supported data rates */
+	u8 rates[MAX_RATES + 1];
+};
+
+/**
+ *  @brief Structure used to store information for each beacon/probe response
+ */
+struct bss_descriptor {
+	u8 bssid[ETH_ALEN];
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 ssid_len;
+
+	u16 capability;
+	u32 rssi;
+	u32 channel;
+	u16 beaconperiod;
+	__le16 atimwindow;
+
+	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
+	u8 mode;
+
+	/* zero-terminated array of supported data rates */
+	u8 rates[MAX_RATES + 1];
+
+	unsigned long last_scanned;
+
+	union ieee_phy_param_set phy;
+	union ieee_ss_param_set ss;
+
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8 rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
+
+	u8 mesh;
+
+	struct list_head list;
+};
+
+/** Association request
+ *
+ * Encapsulates all the options that describe a specific assocation request
+ * or configuration of the wireless card's radio, mode, and security settings.
+ */
+struct assoc_request {
+#define ASSOC_FLAG_SSID			1
+#define ASSOC_FLAG_CHANNEL		2
+#define ASSOC_FLAG_BAND			3
+#define ASSOC_FLAG_MODE			4
+#define ASSOC_FLAG_BSSID		5
+#define ASSOC_FLAG_WEP_KEYS		6
+#define ASSOC_FLAG_WEP_TX_KEYIDX	7
+#define ASSOC_FLAG_WPA_MCAST_KEY	8
+#define ASSOC_FLAG_WPA_UCAST_KEY	9
+#define ASSOC_FLAG_SECINFO		10
+#define ASSOC_FLAG_WPA_IE		11
+	unsigned long flags;
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 ssid_len;
+	u8 channel;
+	u8 band;
+	u8 mode;
+	u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
+
+	/** WEP keys */
+	struct enc_key wep_keys[4];
+	u16 wep_tx_keyidx;
+
+	/** WPA keys */
+	struct enc_key wpa_mcast_key;
+	struct enc_key wpa_unicast_key;
+
+	struct lbs_802_11_security secinfo;
+
+	/** WPA Information Elements*/
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	u8 wpa_ie_len;
+
+	/* BSS to associate with for infrastructure of Ad-Hoc join */
+	struct bss_descriptor bss;
+};
+
+
+extern u8 lbs_bg_rates[MAX_RATES];
 
 void lbs_association_worker(struct work_struct *work);
 struct assoc_request *lbs_get_association_request(struct lbs_private *priv);
@@ -13,4 +132,24 @@
 int lbs_cmd_80211_deauthenticate(struct lbs_private *priv,
 				 u8 bssid[ETH_ALEN], u16 reason);
 
+int lbs_cmd_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *cmd);
+int lbs_ret_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *resp);
+
+int lbs_cmd_bcn_ctrl(struct lbs_private *priv,
+				struct cmd_ds_command *cmd,
+				u16 cmd_action);
+int lbs_ret_802_11_bcn_ctrl(struct lbs_private *priv,
+					struct cmd_ds_command *resp);
+
+int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
+			   struct assoc_request *assoc);
+
+int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
+			      uint16_t *enable);
+
+int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
+				struct assoc_request *assoc);
+
 #endif /* _LBS_ASSOC_H */
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
new file mode 100644
index 0000000..4396dcc
--- /dev/null
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -0,0 +1,198 @@
+/*
+ * Implement cfg80211 ("iw") support.
+ *
+ * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany
+ * Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ */
+
+#include <net/cfg80211.h>
+
+#include "cfg.h"
+#include "cmd.h"
+
+
+#define CHAN2G(_channel, _freq, _flags) {        \
+	.band             = IEEE80211_BAND_2GHZ, \
+	.center_freq      = (_freq),             \
+	.hw_value         = (_channel),          \
+	.flags            = (_flags),            \
+	.max_antenna_gain = 0,                   \
+	.max_power        = 30,                  \
+}
+
+static struct ieee80211_channel lbs_2ghz_channels[] = {
+	CHAN2G(1,  2412, 0),
+	CHAN2G(2,  2417, 0),
+	CHAN2G(3,  2422, 0),
+	CHAN2G(4,  2427, 0),
+	CHAN2G(5,  2432, 0),
+	CHAN2G(6,  2437, 0),
+	CHAN2G(7,  2442, 0),
+	CHAN2G(8,  2447, 0),
+	CHAN2G(9,  2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+	.bitrate  = (_rate),                  \
+	.hw_value = (_rateid),                \
+	.flags    = (_flags),                 \
+}
+
+
+static struct ieee80211_rate lbs_rates[] = {
+	RATETAB_ENT(10,  0x1,   0),
+	RATETAB_ENT(20,  0x2,   0),
+	RATETAB_ENT(55,  0x4,   0),
+	RATETAB_ENT(110, 0x8,   0),
+	RATETAB_ENT(60,  0x10,  0),
+	RATETAB_ENT(90,  0x20,  0),
+	RATETAB_ENT(120, 0x40,  0),
+	RATETAB_ENT(180, 0x80,  0),
+	RATETAB_ENT(240, 0x100, 0),
+	RATETAB_ENT(360, 0x200, 0),
+	RATETAB_ENT(480, 0x400, 0),
+	RATETAB_ENT(540, 0x800, 0),
+};
+
+static struct ieee80211_supported_band lbs_band_2ghz = {
+	.channels = lbs_2ghz_channels,
+	.n_channels = ARRAY_SIZE(lbs_2ghz_channels),
+	.bitrates = lbs_rates,
+	.n_bitrates = ARRAY_SIZE(lbs_rates),
+};
+
+
+static const u32 cipher_suites[] = {
+	WLAN_CIPHER_SUITE_WEP40,
+	WLAN_CIPHER_SUITE_WEP104,
+	WLAN_CIPHER_SUITE_TKIP,
+	WLAN_CIPHER_SUITE_CCMP,
+};
+
+
+
+static int lbs_cfg_set_channel(struct wiphy *wiphy,
+	struct ieee80211_channel *chan,
+	enum nl80211_channel_type channel_type)
+{
+	struct lbs_private *priv = wiphy_priv(wiphy);
+	int ret = -ENOTSUPP;
+
+	lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", chan->center_freq, channel_type);
+
+	if (channel_type != NL80211_CHAN_NO_HT)
+		goto out;
+
+	ret = lbs_set_channel(priv, chan->hw_value);
+
+ out:
+	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
+	return ret;
+}
+
+
+
+
+static struct cfg80211_ops lbs_cfg80211_ops = {
+	.set_channel = lbs_cfg_set_channel,
+};
+
+
+/*
+ * At this time lbs_private *priv doesn't even exist, so we just allocate
+ * memory and don't initialize the wiphy further. This is postponed until we
+ * can talk to the firmware and happens at registration time in
+ * lbs_cfg_wiphy_register().
+ */
+struct wireless_dev *lbs_cfg_alloc(struct device *dev)
+{
+	int ret = 0;
+	struct wireless_dev *wdev;
+
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+	if (!wdev) {
+		dev_err(dev, "cannot allocate wireless device\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private));
+	if (!wdev->wiphy) {
+		dev_err(dev, "cannot allocate wiphy\n");
+		ret = -ENOMEM;
+		goto err_wiphy_new;
+	}
+
+	lbs_deb_leave(LBS_DEB_CFG80211);
+	return wdev;
+
+ err_wiphy_new:
+	kfree(wdev);
+	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
+	return ERR_PTR(ret);
+}
+
+
+/*
+ * This function get's called after lbs_setup_firmware() determined the
+ * firmware capabities. So we can setup the wiphy according to our
+ * hardware/firmware.
+ */
+int lbs_cfg_register(struct lbs_private *priv)
+{
+	struct wireless_dev *wdev = priv->wdev;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	wdev->wiphy->max_scan_ssids = 1;
+	wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+	/* TODO: BIT(NL80211_IFTYPE_ADHOC); */
+	wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+	/* TODO: honor priv->regioncode */
+	wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz;
+
+	/*
+	 * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have
+	 * never seen a firmware without WPA
+	 */
+	wdev->wiphy->cipher_suites = cipher_suites;
+	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+
+	ret = wiphy_register(wdev->wiphy);
+	if (ret < 0)
+		lbs_pr_err("cannot register wiphy device\n");
+
+	ret = register_netdev(priv->dev);
+	if (ret)
+		lbs_pr_err("cannot register network device\n");
+
+	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
+	return ret;
+}
+
+
+void lbs_cfg_free(struct lbs_private *priv)
+{
+	struct wireless_dev *wdev = priv->wdev;
+
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	if (!wdev)
+		return;
+
+	if (wdev->wiphy) {
+		wiphy_unregister(wdev->wiphy);
+		wiphy_free(wdev->wiphy);
+	}
+	kfree(wdev);
+}
diff --git a/drivers/net/wireless/libertas/cfg.h b/drivers/net/wireless/libertas/cfg.h
new file mode 100644
index 0000000..e09a193
--- /dev/null
+++ b/drivers/net/wireless/libertas/cfg.h
@@ -0,0 +1,16 @@
+#ifndef __LBS_CFG80211_H__
+#define __LBS_CFG80211_H__
+
+#include "dev.h"
+
+struct wireless_dev *lbs_cfg_alloc(struct device *dev);
+int lbs_cfg_register(struct lbs_private *priv);
+void lbs_cfg_free(struct lbs_private *priv);
+
+int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid,
+	u8 ssid_len);
+int lbs_scan_networks(struct lbs_private *priv, int full_scan);
+void lbs_cfg_scan_worker(struct work_struct *work);
+
+
+#endif
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 0a324dc..b9b371b 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -3,21 +3,20 @@
   * It prepares command and sends it to firmware when it is ready.
   */
 
-#include <net/iw_handler.h>
-#include <net/lib80211.h>
 #include <linux/kfifo.h>
 #include <linux/sched.h>
+
 #include "host.h"
-#include "hostcmd.h"
 #include "decl.h"
 #include "defs.h"
 #include "dev.h"
 #include "assoc.h"
 #include "wext.h"
+#include "scan.h"
 #include "cmd.h"
 
-static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
 
+static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
 
 /**
  *  @brief Simple callback that copies response back into command
@@ -77,6 +76,30 @@
 }
 
 /**
+ *  @brief This function checks if the command is allowed.
+ *
+ *  @param priv         A pointer to lbs_private structure
+ *  @return             allowed or not allowed.
+ */
+
+static int lbs_is_cmd_allowed(struct lbs_private *priv)
+{
+	int ret = 1;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (!priv->is_auto_deep_sleep_enabled) {
+		if (priv->is_deep_sleep) {
+			lbs_deb_cmd("command not allowed in deep sleep\n");
+			ret = 0;
+		}
+	}
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return ret;
+}
+
+/**
  *  @brief Updates the hardware details like MAC address and regulatory region
  *
  *  @param priv    	A pointer to struct lbs_private structure
@@ -169,11 +192,6 @@
 		goto out;
 	}
 
-	if (lbs_set_universaltable(priv, 0)) {
-		ret = -1;
-		goto out;
-	}
-
 out:
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
@@ -222,7 +240,7 @@
 
 	cmd->command = cpu_to_le16(CMD_802_11_PS_MODE);
 	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ps_mode) +
-				S_DS_GEN);
+				sizeof(struct cmd_header));
 	psm->action = cpu_to_le16(cmd_action);
 	psm->multipledtim = 0;
 	switch (cmd_action) {
@@ -251,33 +269,6 @@
 	return 0;
 }
 
-int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv,
-				      uint16_t cmd_action, uint16_t *timeout)
-{
-	struct cmd_ds_802_11_inactivity_timeout cmd;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	cmd.hdr.command = cpu_to_le16(CMD_802_11_INACTIVITY_TIMEOUT);
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	cmd.action = cpu_to_le16(cmd_action);
-
-	if (cmd_action == CMD_ACT_SET)
-		cmd.timeout = cpu_to_le16(*timeout);
-	else
-		cmd.timeout = 0;
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_INACTIVITY_TIMEOUT, &cmd);
-
-	if (!ret)
-		*timeout = le16_to_cpu(cmd.timeout);
-
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return 0;
-}
-
 int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action,
 				struct sleep_params *sp)
 {
@@ -320,190 +311,53 @@
 	return 0;
 }
 
-int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
-			   struct assoc_request *assoc)
+static int lbs_wait_for_ds_awake(struct lbs_private *priv)
 {
-	struct cmd_ds_802_11_set_wep cmd;
 	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_CMD);
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.hdr.command = cpu_to_le16(CMD_802_11_SET_WEP);
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+	if (priv->is_deep_sleep) {
+		if (!wait_event_interruptible_timeout(priv->ds_awake_q,
+					!priv->is_deep_sleep, (10 * HZ))) {
+			lbs_pr_err("ds_awake_q: timer expired\n");
+			ret = -1;
+		}
+	}
 
-	cmd.action = cpu_to_le16(cmd_action);
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
 
-	if (cmd_action == CMD_ACT_ADD) {
-		int i;
+int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
+{
+	int ret =  0;
 
-		/* default tx key index */
-		cmd.keyindex = cpu_to_le16(assoc->wep_tx_keyidx &
-					   CMD_WEP_KEY_INDEX_MASK);
+	lbs_deb_enter(LBS_DEB_CMD);
 
-		/* Copy key types and material to host command structure */
-		for (i = 0; i < 4; i++) {
-			struct enc_key *pkey = &assoc->wep_keys[i];
-
-			switch (pkey->len) {
-			case KEY_LEN_WEP_40:
-				cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
-				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
-				lbs_deb_cmd("SET_WEP: add key %d (40 bit)\n", i);
-				break;
-			case KEY_LEN_WEP_104:
-				cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
-				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
-				lbs_deb_cmd("SET_WEP: add key %d (104 bit)\n", i);
-				break;
-			case 0:
-				break;
-			default:
-				lbs_deb_cmd("SET_WEP: invalid key %d, length %d\n",
-					    i, pkey->len);
-				ret = -1;
-				goto done;
-				break;
+	if (deep_sleep) {
+		if (priv->is_deep_sleep != 1) {
+			lbs_deb_cmd("deep sleep: sleep\n");
+			BUG_ON(!priv->enter_deep_sleep);
+			ret = priv->enter_deep_sleep(priv);
+			if (!ret) {
+				netif_stop_queue(priv->dev);
+				netif_carrier_off(priv->dev);
 			}
+		} else {
+			lbs_pr_err("deep sleep: already enabled\n");
 		}
-	} else if (cmd_action == CMD_ACT_REMOVE) {
-		/* ACT_REMOVE clears _all_ WEP keys */
-
-		/* default tx key index */
-		cmd.keyindex = cpu_to_le16(priv->wep_tx_keyidx &
-					   CMD_WEP_KEY_INDEX_MASK);
-		lbs_deb_cmd("SET_WEP: remove key %d\n", priv->wep_tx_keyidx);
-	}
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
-done:
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-
-int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
-			      uint16_t *enable)
-{
-	struct cmd_ds_802_11_enable_rsn cmd;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-	cmd.action = cpu_to_le16(cmd_action);
-
-	if (cmd_action == CMD_ACT_GET)
-		cmd.enable = 0;
-	else {
-		if (*enable)
-			cmd.enable = cpu_to_le16(CMD_ENABLE_RSN);
-		else
-			cmd.enable = cpu_to_le16(CMD_DISABLE_RSN);
-		lbs_deb_cmd("ENABLE_RSN: %d\n", *enable);
-	}
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);
-	if (!ret && cmd_action == CMD_ACT_GET)
-		*enable = le16_to_cpu(cmd.enable);
-
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-
-static void set_one_wpa_key(struct MrvlIEtype_keyParamSet *keyparam,
-                            struct enc_key *key)
-{
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (key->flags & KEY_INFO_WPA_ENABLED)
-		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_ENABLED);
-	if (key->flags & KEY_INFO_WPA_UNICAST)
-		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_UNICAST);
-	if (key->flags & KEY_INFO_WPA_MCAST)
-		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_MCAST);
-
-	keyparam->type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
-	keyparam->keytypeid = cpu_to_le16(key->type);
-	keyparam->keylen = cpu_to_le16(key->len);
-	memcpy(keyparam->key, key->key, key->len);
-
-	/* Length field doesn't include the {type,length} header */
-	keyparam->length = cpu_to_le16(sizeof(*keyparam) - 4);
-	lbs_deb_leave(LBS_DEB_CMD);
-}
-
-int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
-				struct assoc_request *assoc)
-{
-	struct cmd_ds_802_11_key_material cmd;
-	int ret = 0;
-	int index = 0;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	cmd.action = cpu_to_le16(cmd_action);
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	if (cmd_action == CMD_ACT_GET) {
-		cmd.hdr.size = cpu_to_le16(S_DS_GEN + 2);
 	} else {
-		memset(cmd.keyParamSet, 0, sizeof(cmd.keyParamSet));
-
-		if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc->flags)) {
-			set_one_wpa_key(&cmd.keyParamSet[index],
-					&assoc->wpa_unicast_key);
-			index++;
-		}
-
-		if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc->flags)) {
-			set_one_wpa_key(&cmd.keyParamSet[index],
-					&assoc->wpa_mcast_key);
-			index++;
-		}
-
-		/* The common header and as many keys as we included */
-		cmd.hdr.size = cpu_to_le16(offsetof(typeof(cmd),
-						    keyParamSet[index]));
-	}
-	ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);
-	/* Copy the returned key to driver private data */
-	if (!ret && cmd_action == CMD_ACT_GET) {
-		void *buf_ptr = cmd.keyParamSet;
-		void *resp_end = &(&cmd)[1];
-
-		while (buf_ptr < resp_end) {
-			struct MrvlIEtype_keyParamSet *keyparam = buf_ptr;
-			struct enc_key *key;
-			uint16_t param_set_len = le16_to_cpu(keyparam->length);
-			uint16_t key_len = le16_to_cpu(keyparam->keylen);
-			uint16_t key_flags = le16_to_cpu(keyparam->keyinfo);
-			uint16_t key_type = le16_to_cpu(keyparam->keytypeid);
-			void *end;
-
-			end = (void *)keyparam + sizeof(keyparam->type)
-				+ sizeof(keyparam->length) + param_set_len;
-
-			/* Make sure we don't access past the end of the IEs */
-			if (end > resp_end)
-				break;
-
-			if (key_flags & KEY_INFO_WPA_UNICAST)
-				key = &priv->wpa_unicast_key;
-			else if (key_flags & KEY_INFO_WPA_MCAST)
-				key = &priv->wpa_mcast_key;
-			else
-				break;
-
-			/* Copy returned key into driver */
-			memset(key, 0, sizeof(struct enc_key));
-			if (key_len > sizeof(key->key))
-				break;
-			key->type = key_type;
-			key->flags = key_flags;
-			key->len = key_len;
-			memcpy(key->key, keyparam->key, key->len);
-
-			buf_ptr = end + 1;
+		if (priv->is_deep_sleep) {
+			lbs_deb_cmd("deep sleep: wakeup\n");
+			BUG_ON(!priv->exit_deep_sleep);
+			ret = priv->exit_deep_sleep(priv);
+			if (!ret) {
+				ret = lbs_wait_for_ds_awake(priv);
+				if (ret)
+					lbs_pr_err("deep sleep: wakeup"
+							"failed\n");
+			}
 		}
 	}
 
@@ -535,7 +389,7 @@
 	switch (oid) {
 	case SNMP_MIB_OID_BSS_TYPE:
 		cmd.bufsize = cpu_to_le16(sizeof(u8));
-		cmd.value[0] = (val == IW_MODE_ADHOC) ? 2 : 1;
+		cmd.value[0] = val;
 		break;
 	case SNMP_MIB_OID_11D_ENABLE:
 	case SNMP_MIB_OID_FRAG_THRESHOLD:
@@ -588,13 +442,7 @@
 
 	switch (le16_to_cpu(cmd.bufsize)) {
 	case sizeof(u8):
-		if (oid == SNMP_MIB_OID_BSS_TYPE) {
-			if (cmd.value[0] == 2)
-				*out_val = IW_MODE_ADHOC;
-			else
-				*out_val = IW_MODE_INFRA;
-		} else
-			*out_val = cmd.value[0];
+		*out_val = cmd.value[0];
 		break;
 	case sizeof(u16):
 		*out_val = le16_to_cpu(*((__le16 *)(&cmd.value)));
@@ -681,7 +529,7 @@
 	cmd->command = cpu_to_le16(CMD_802_11_MONITOR_MODE);
 	cmd->size =
 	    cpu_to_le16(sizeof(struct cmd_ds_802_11_monitor_mode) +
-			     S_DS_GEN);
+			     sizeof(struct cmd_header));
 
 	monitor->action = cpu_to_le16(cmd_action);
 	if (cmd_action == CMD_ACT_SET) {
@@ -692,111 +540,6 @@
 	return 0;
 }
 
-static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok)
-{
-/*		Bit  	Rate
-*		15:13 Reserved
-*		12    54 Mbps
-*		11    48 Mbps
-*		10    36 Mbps
-*		9     24 Mbps
-*		8     18 Mbps
-*		7     12 Mbps
-*		6     9 Mbps
-*		5     6 Mbps
-*		4     Reserved
-*		3     11 Mbps
-*		2     5.5 Mbps
-*		1     2 Mbps
-*		0     1 Mbps
-**/
-
-	uint16_t ratemask;
-	int i = lbs_data_rate_to_fw_index(rate);
-	if (lower_rates_ok)
-		ratemask = (0x1fef >> (12 - i));
-	else
-		ratemask = (1 << i);
-	return cpu_to_le16(ratemask);
-}
-
-int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
-				      uint16_t cmd_action)
-{
-	struct cmd_ds_802_11_rate_adapt_rateset cmd;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (!priv->cur_rate && !priv->enablehwauto)
-		return -EINVAL;
-
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	cmd.action = cpu_to_le16(cmd_action);
-	cmd.enablehwauto = cpu_to_le16(priv->enablehwauto);
-	cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto);
-	ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd);
-	if (!ret && cmd_action == CMD_ACT_GET) {
-		priv->ratebitmap = le16_to_cpu(cmd.bitmap);
-		priv->enablehwauto = le16_to_cpu(cmd.enablehwauto);
-	}
-
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_cmd_802_11_rate_adapt_rateset);
-
-/**
- *  @brief Set the data rate
- *
- *  @param priv    	A pointer to struct lbs_private structure
- *  @param rate  	The desired data rate, or 0 to clear a locked rate
- *
- *  @return 	   	0 on success, error on failure
- */
-int lbs_set_data_rate(struct lbs_private *priv, u8 rate)
-{
-	struct cmd_ds_802_11_data_rate cmd;
-	int ret = 0;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	if (rate > 0) {
-		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_FIX_RATE);
-		cmd.rates[0] = lbs_data_rate_to_fw_index(rate);
-		if (cmd.rates[0] == 0) {
-			lbs_deb_cmd("DATA_RATE: invalid requested rate of"
-			            " 0x%02X\n", rate);
-			ret = 0;
-			goto out;
-		}
-		lbs_deb_cmd("DATA_RATE: set fixed 0x%02X\n", cmd.rates[0]);
-	} else {
-		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_AUTO);
-		lbs_deb_cmd("DATA_RATE: setting auto\n");
-	}
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_DATA_RATE, &cmd);
-	if (ret)
-		goto out;
-
-	lbs_deb_hex(LBS_DEB_CMD, "DATA_RATE_RESP", (u8 *) &cmd, sizeof (cmd));
-
-	/* FIXME: get actual rates FW can do if this command actually returns
-	 * all data rates supported.
-	 */
-	priv->cur_rate = lbs_fw_index_to_data_rate(cmd.rates[0]);
-	lbs_deb_cmd("DATA_RATE: current rate is 0x%02x\n", priv->cur_rate);
-
-out:
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-
 /**
  *  @brief Get the radio channel
  *
@@ -804,7 +547,7 @@
  *
  *  @return 	   	The channel on success, error on failure
  */
-int lbs_get_channel(struct lbs_private *priv)
+static int lbs_get_channel(struct lbs_private *priv)
 {
 	struct cmd_ds_802_11_rf_channel cmd;
 	int ret = 0;
@@ -836,7 +579,7 @@
 
 	ret = lbs_get_channel(priv);
 	if (ret > 0) {
-		priv->curbssparams.channel = ret;
+		priv->channel = ret;
 		ret = 0;
 	}
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -855,7 +598,7 @@
 {
 	struct cmd_ds_802_11_rf_channel cmd;
 #ifdef DEBUG
-	u8 old_channel = priv->curbssparams.channel;
+	u8 old_channel = priv->channel;
 #endif
 	int ret = 0;
 
@@ -870,36 +613,15 @@
 	if (ret)
 		goto out;
 
-	priv->curbssparams.channel = (uint8_t) le16_to_cpu(cmd.channel);
+	priv->channel = (uint8_t) le16_to_cpu(cmd.channel);
 	lbs_deb_cmd("channel switch from %d to %d\n", old_channel,
-		priv->curbssparams.channel);
+		priv->channel);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
 	return ret;
 }
 
-static int lbs_cmd_802_11_rssi(struct lbs_private *priv,
-				struct cmd_ds_command *cmd)
-{
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	cmd->command = cpu_to_le16(CMD_802_11_RSSI);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rssi) + S_DS_GEN);
-	cmd->params.rssi.N = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR);
-
-	/* reset Beacon SNR/NF/RSSI values */
-	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = 0;
-	priv->SNR[TYPE_BEACON][TYPE_AVG] = 0;
-	priv->NF[TYPE_BEACON][TYPE_NOAVG] = 0;
-	priv->NF[TYPE_BEACON][TYPE_AVG] = 0;
-	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = 0;
-	priv->RSSI[TYPE_BEACON][TYPE_AVG] = 0;
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
 static int lbs_cmd_reg_access(struct cmd_ds_command *cmdptr,
 			       u8 cmd_action, void *pdata_buf)
 {
@@ -916,7 +638,7 @@
 
 			cmdptr->size =
 			    cpu_to_le16(sizeof (struct cmd_ds_mac_reg_access)
-					+ S_DS_GEN);
+					+ sizeof(struct cmd_header));
 			macreg =
 			    (struct cmd_ds_mac_reg_access *)&cmdptr->params.
 			    macreg;
@@ -935,7 +657,7 @@
 			cmdptr->size =
 			    cpu_to_le16(sizeof
 					     (struct cmd_ds_bbp_reg_access)
-					     + S_DS_GEN);
+					     + sizeof(struct cmd_header));
 			bbpreg =
 			    (struct cmd_ds_bbp_reg_access *)&cmdptr->params.
 			    bbpreg;
@@ -954,7 +676,7 @@
 			cmdptr->size =
 			    cpu_to_le16(sizeof
 					     (struct cmd_ds_rf_reg_access) +
-					     S_DS_GEN);
+					     sizeof(struct cmd_header));
 			rfreg =
 			    (struct cmd_ds_rf_reg_access *)&cmdptr->params.
 			    rfreg;
@@ -974,192 +696,6 @@
 	return 0;
 }
 
-static int lbs_cmd_bt_access(struct cmd_ds_command *cmd,
-			       u16 cmd_action, void *pdata_buf)
-{
-	struct cmd_ds_bt_access *bt_access = &cmd->params.bt;
-	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
-
-	cmd->command = cpu_to_le16(CMD_BT_ACCESS);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_bt_access) + S_DS_GEN);
-	cmd->result = 0;
-	bt_access->action = cpu_to_le16(cmd_action);
-
-	switch (cmd_action) {
-	case CMD_ACT_BT_ACCESS_ADD:
-		memcpy(bt_access->addr1, pdata_buf, 2 * ETH_ALEN);
-		lbs_deb_hex(LBS_DEB_MESH, "BT_ADD: blinded MAC addr", bt_access->addr1, 6);
-		break;
-	case CMD_ACT_BT_ACCESS_DEL:
-		memcpy(bt_access->addr1, pdata_buf, 1 * ETH_ALEN);
-		lbs_deb_hex(LBS_DEB_MESH, "BT_DEL: blinded MAC addr", bt_access->addr1, 6);
-		break;
-	case CMD_ACT_BT_ACCESS_LIST:
-		bt_access->id = cpu_to_le32(*(u32 *) pdata_buf);
-		break;
-	case CMD_ACT_BT_ACCESS_RESET:
-		break;
-	case CMD_ACT_BT_ACCESS_SET_INVERT:
-		bt_access->id = cpu_to_le32(*(u32 *) pdata_buf);
-		break;
-	case CMD_ACT_BT_ACCESS_GET_INVERT:
-		break;
-	default:
-		break;
-	}
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
-static int lbs_cmd_fwt_access(struct cmd_ds_command *cmd,
-			       u16 cmd_action, void *pdata_buf)
-{
-	struct cmd_ds_fwt_access *fwt_access = &cmd->params.fwt;
-	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
-
-	cmd->command = cpu_to_le16(CMD_FWT_ACCESS);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access) + S_DS_GEN);
-	cmd->result = 0;
-
-	if (pdata_buf)
-		memcpy(fwt_access, pdata_buf, sizeof(*fwt_access));
-	else
-		memset(fwt_access, 0, sizeof(*fwt_access));
-
-	fwt_access->action = cpu_to_le16(cmd_action);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
-int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
-		    struct cmd_ds_mesh_access *cmd)
-{
-	int ret;
-
-	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
-
-	cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS);
-	cmd->hdr.size = cpu_to_le16(sizeof(*cmd));
-	cmd->hdr.result = 0;
-
-	cmd->action = cpu_to_le16(cmd_action);
-
-	ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return ret;
-}
-
-static int __lbs_mesh_config_send(struct lbs_private *priv,
-				  struct cmd_ds_mesh_config *cmd,
-				  uint16_t action, uint16_t type)
-{
-	int ret;
-	u16 command = CMD_MESH_CONFIG_OLD;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	/*
-	 * Command id is 0xac for v10 FW along with mesh interface
-	 * id in bits 14-13-12.
-	 */
-	if (priv->mesh_fw_ver == MESH_FW_NEW)
-		command = CMD_MESH_CONFIG |
-			  (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
-
-	cmd->hdr.command = cpu_to_le16(command);
-	cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
-	cmd->hdr.result = 0;
-
-	cmd->type = cpu_to_le16(type);
-	cmd->action = cpu_to_le16(action);
-
-	ret = lbs_cmd_with_response(priv, command, cmd);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return ret;
-}
-
-int lbs_mesh_config_send(struct lbs_private *priv,
-			 struct cmd_ds_mesh_config *cmd,
-			 uint16_t action, uint16_t type)
-{
-	int ret;
-
-	if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG))
-		return -EOPNOTSUPP;
-
-	ret = __lbs_mesh_config_send(priv, cmd, action, type);
-	return ret;
-}
-
-/* This function is the CMD_MESH_CONFIG legacy function.  It only handles the
- * START and STOP actions.  The extended actions supported by CMD_MESH_CONFIG
- * are all handled by preparing a struct cmd_ds_mesh_config and passing it to
- * lbs_mesh_config_send.
- */
-int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan)
-{
-	struct cmd_ds_mesh_config cmd;
-	struct mrvl_meshie *ie;
-	DECLARE_SSID_BUF(ssid);
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.channel = cpu_to_le16(chan);
-	ie = (struct mrvl_meshie *)cmd.data;
-
-	switch (action) {
-	case CMD_ACT_MESH_CONFIG_START:
-		ie->id = WLAN_EID_GENERIC;
-		ie->val.oui[0] = 0x00;
-		ie->val.oui[1] = 0x50;
-		ie->val.oui[2] = 0x43;
-		ie->val.type = MARVELL_MESH_IE_TYPE;
-		ie->val.subtype = MARVELL_MESH_IE_SUBTYPE;
-		ie->val.version = MARVELL_MESH_IE_VERSION;
-		ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
-		ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
-		ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
-		ie->val.mesh_id_len = priv->mesh_ssid_len;
-		memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
-		ie->len = sizeof(struct mrvl_meshie_val) -
-			IW_ESSID_MAX_SIZE + priv->mesh_ssid_len;
-		cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
-		break;
-	case CMD_ACT_MESH_CONFIG_STOP:
-		break;
-	default:
-		return -1;
-	}
-	lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
-		    action, priv->mesh_tlv, chan,
-		    print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len));
-
-	return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
-}
-
-static int lbs_cmd_bcn_ctrl(struct lbs_private * priv,
-				struct cmd_ds_command *cmd,
-				u16 cmd_action)
-{
-	struct cmd_ds_802_11_beacon_control
-		*bcn_ctrl = &cmd->params.bcn_ctrl;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	cmd->size =
-	    cpu_to_le16(sizeof(struct cmd_ds_802_11_beacon_control)
-			     + S_DS_GEN);
-	cmd->command = cpu_to_le16(CMD_802_11_BEACON_CTRL);
-
-	bcn_ctrl->action = cpu_to_le16(cmd_action);
-	bcn_ctrl->beacon_enable = cpu_to_le16(priv->beacon_enable);
-	bcn_ctrl->beacon_period = cpu_to_le16(priv->beacon_period);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
 static void lbs_queue_cmd(struct lbs_private *priv,
 			  struct cmd_ctrl_node *cmdnode)
 {
@@ -1243,8 +779,17 @@
 		timeo = HZ/4;
 	}
 
-	/* Setup the timer after transmit command */
-	mod_timer(&priv->command_timer, jiffies + timeo);
+	if (command == CMD_802_11_DEEP_SLEEP) {
+		if (priv->is_auto_deep_sleep_enabled) {
+			priv->wakeup_dev_required = 1;
+			priv->dnld_sent = 0;
+		}
+		priv->is_deep_sleep = 1;
+		lbs_complete_command(priv, cmdnode, 0);
+	} else {
+		/* Setup the timer after transmit command */
+		mod_timer(&priv->command_timer, jiffies + timeo);
+	}
 
 	lbs_deb_leave(LBS_DEB_HOST);
 }
@@ -1391,6 +936,11 @@
 		goto done;
 	}
 
+	if (!lbs_is_cmd_allowed(priv)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
 	cmdnode = lbs_get_cmd_ctrl_node(priv);
 
 	if (cmdnode == NULL) {
@@ -1441,7 +991,7 @@
 
 		cmdptr->command = cpu_to_le16(cmd_no);
 		cmdptr->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_afc) +
-					   S_DS_GEN);
+					   sizeof(struct cmd_header));
 
 		memmove(&cmdptr->params.afc,
 			pdata_buf, sizeof(struct cmd_ds_802_11_afc));
@@ -1449,45 +999,17 @@
 		ret = 0;
 		goto done;
 
-	case CMD_802_11D_DOMAIN_INFO:
-		ret = lbs_cmd_802_11d_domain_info(priv, cmdptr,
-						   cmd_no, cmd_action);
-		break;
-
 	case CMD_802_11_TPC_CFG:
 		cmdptr->command = cpu_to_le16(CMD_802_11_TPC_CFG);
 		cmdptr->size =
 		    cpu_to_le16(sizeof(struct cmd_ds_802_11_tpc_cfg) +
-				     S_DS_GEN);
+				     sizeof(struct cmd_header));
 
 		memmove(&cmdptr->params.tpccfg,
 			pdata_buf, sizeof(struct cmd_ds_802_11_tpc_cfg));
 
 		ret = 0;
 		break;
-	case CMD_802_11_LED_GPIO_CTRL:
-		{
-			struct mrvl_ie_ledgpio *gpio =
-			    (struct mrvl_ie_ledgpio*)
-			    cmdptr->params.ledgpio.data;
-
-			memmove(&cmdptr->params.ledgpio,
-				pdata_buf,
-				sizeof(struct cmd_ds_802_11_led_ctrl));
-
-			cmdptr->command =
-			    cpu_to_le16(CMD_802_11_LED_GPIO_CTRL);
-
-#define ACTION_NUMLED_TLVTYPE_LEN_FIELDS_LEN 8
-			cmdptr->size =
-			    cpu_to_le16(le16_to_cpu(gpio->header.len)
-				+ S_DS_GEN
-				+ ACTION_NUMLED_TLVTYPE_LEN_FIELDS_LEN);
-			gpio->header.len = gpio->header.len;
-
-			ret = 0;
-			break;
-		}
 
 	case CMD_BT_ACCESS:
 		ret = lbs_cmd_bt_access(cmdptr, cmd_action, pdata_buf);
@@ -1497,15 +1019,13 @@
 		ret = lbs_cmd_fwt_access(cmdptr, cmd_action, pdata_buf);
 		break;
 
-	case CMD_GET_TSF:
-		cmdptr->command = cpu_to_le16(CMD_GET_TSF);
-		cmdptr->size = cpu_to_le16(sizeof(struct cmd_ds_get_tsf) +
-					   S_DS_GEN);
-		ret = 0;
-		break;
 	case CMD_802_11_BEACON_CTRL:
 		ret = lbs_cmd_bcn_ctrl(priv, cmdptr, cmd_action);
 		break;
+	case CMD_802_11_DEEP_SLEEP:
+		cmdptr->command = cpu_to_le16(CMD_802_11_DEEP_SLEEP);
+		cmdptr->size = cpu_to_le16(sizeof(struct cmd_header));
+		break;
 	default:
 		lbs_pr_err("PREP_CMD: unknown command 0x%04x\n", cmd_no);
 		ret = -1;
@@ -1823,30 +1343,6 @@
 	return ret;
 }
 
-void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str)
-{
-	union iwreq_data iwrq;
-	u8 buf[50];
-
-	lbs_deb_enter(LBS_DEB_WEXT);
-
-	memset(&iwrq, 0, sizeof(union iwreq_data));
-	memset(buf, 0, sizeof(buf));
-
-	snprintf(buf, sizeof(buf) - 1, "%s", str);
-
-	iwrq.data.length = strlen(buf) + 1 + IW_EV_LCP_LEN;
-
-	/* Send Event to upper layer */
-	lbs_deb_wext("event indication string %s\n", (char *)buf);
-	lbs_deb_wext("event indication length %d\n", iwrq.data.length);
-	lbs_deb_wext("sending wireless event IWEVCUSTOM for %s\n", str);
-
-	wireless_send_event(priv->dev, IWEVCUSTOM, &iwrq, buf);
-
-	lbs_deb_leave(LBS_DEB_WEXT);
-}
-
 static void lbs_send_confirmsleep(struct lbs_private *priv)
 {
 	unsigned long flags;
@@ -2024,7 +1520,7 @@
 }
 
 
-static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
+struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
 	uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
 	int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
 	unsigned long callback_arg)
@@ -2039,6 +1535,11 @@
 		goto done;
 	}
 
+	if (!lbs_is_cmd_allowed(priv)) {
+		cmdnode = ERR_PTR(-EBUSY);
+		goto done;
+	}
+
 	cmdnode = lbs_get_cmd_ctrl_node(priv);
 	if (cmdnode == NULL) {
 		lbs_deb_host("PREP_CMD: cmdnode is NULL\n");
@@ -2117,5 +1618,3 @@
 	return ret;
 }
 EXPORT_SYMBOL_GPL(__lbs_cmd);
-
-
diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h
index 392e578..2862748 100644
--- a/drivers/net/wireless/libertas/cmd.h
+++ b/drivers/net/wireless/libertas/cmd.h
@@ -3,11 +3,30 @@
 #ifndef _LBS_CMD_H_
 #define _LBS_CMD_H_
 
-#include "hostcmd.h"
+#include "host.h"
 #include "dev.h"
 
+
+/* Command & response transfer between host and card */
+
+struct cmd_ctrl_node {
+	struct list_head list;
+	int result;
+	/* command response */
+	int (*callback)(struct lbs_private *,
+			unsigned long,
+			struct cmd_header *);
+	unsigned long callback_arg;
+	/* command data */
+	struct cmd_header *cmdbuf;
+	/* wait queue */
+	u16 cmdwaitqwoken;
+	wait_queue_head_t cmdwait_q;
+};
+
+
 /* lbs_cmd() infers the size of the buffer to copy data back into, from
-   the size of the target of the pointer. Since the command to be sent 
+   the size of the target of the pointer. Since the command to be sent
    may often be smaller, that size is set in cmd->size by the caller.*/
 #define lbs_cmd(priv, cmdnr, cmd, cb, cb_arg)	({		\
 	uint16_t __sz = le16_to_cpu((cmd)->hdr.size);		\
@@ -18,6 +37,11 @@
 #define lbs_cmd_with_response(priv, cmdnr, cmd)	\
 	lbs_cmd(priv, cmdnr, cmd, lbs_cmd_copyback, (unsigned long) (cmd))
 
+int lbs_prepare_and_send_command(struct lbs_private *priv,
+	u16 cmd_no,
+	u16 cmd_action,
+	u16 wait_option, u32 cmd_oid, void *pdata_buf);
+
 void lbs_cmd_async(struct lbs_private *priv, uint16_t command,
 	struct cmd_header *in_cmd, int in_cmd_size);
 
@@ -26,62 +50,93 @@
 	      int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
 	      unsigned long callback_arg);
 
-int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
-		int8_t p1, int8_t p2);
-
-int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
-		int8_t p2, int usesnr);
-
-int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
-		int8_t p1, int8_t p2);
-
-int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
-		int8_t p2, int usesnr);
+struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
+	uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
+	int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
+	unsigned long callback_arg);
 
 int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
 		     struct cmd_header *resp);
 
+int lbs_allocate_cmd_buffer(struct lbs_private *priv);
+int lbs_free_cmd_buffer(struct lbs_private *priv);
+
+int lbs_execute_next_command(struct lbs_private *priv);
+void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
+			  int result);
+int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len);
+
+
+/* From cmdresp.c */
+
+void lbs_mac_event_disconnected(struct lbs_private *priv);
+
+
+
+/* Events */
+
+int lbs_process_event(struct lbs_private *priv, u32 event);
+
+
+/* Actual commands */
+
 int lbs_update_hw_spec(struct lbs_private *priv);
 
-int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
-		    struct cmd_ds_mesh_access *cmd);
-
-int lbs_set_data_rate(struct lbs_private *priv, u8 rate);
-
-int lbs_get_channel(struct lbs_private *priv);
 int lbs_set_channel(struct lbs_private *priv, u8 channel);
 
-int lbs_mesh_config_send(struct lbs_private *priv,
-			 struct cmd_ds_mesh_config *cmd,
-			 uint16_t action, uint16_t type);
-int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
+int lbs_update_channel(struct lbs_private *priv);
 
 int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
 		struct wol_config *p_wol_config);
-int lbs_suspend(struct lbs_private *priv);
-void lbs_resume(struct lbs_private *priv);
 
-int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
-				      uint16_t cmd_action);
-int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv,
-				      uint16_t cmd_action, uint16_t *timeout);
 int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action,
 				struct sleep_params *sp);
-int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
-			   struct assoc_request *assoc);
-int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
-			      uint16_t *enable);
-int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
-				struct assoc_request *assoc);
+
+void lbs_ps_sleep(struct lbs_private *priv, int wait_option);
+
+void lbs_ps_wakeup(struct lbs_private *priv, int wait_option);
+
+void lbs_ps_confirm_sleep(struct lbs_private *priv);
+
+int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on);
+
+void lbs_set_mac_control(struct lbs_private *priv);
 
 int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
 		     s16 *maxlevel);
-int lbs_set_tx_power(struct lbs_private *priv, s16 dbm);
-
-int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on);
 
 int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val);
 
 int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val);
 
+
+/* Mesh related */
+
+int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
+		    struct cmd_ds_mesh_access *cmd);
+
+int lbs_mesh_config_send(struct lbs_private *priv,
+			 struct cmd_ds_mesh_config *cmd,
+			 uint16_t action, uint16_t type);
+
+int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
+
+
+/* Commands only used in wext.c, assoc. and scan.c */
+
+int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+		int8_t p1, int8_t p2);
+
+int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+		int8_t p2, int usesnr);
+
+int lbs_set_data_rate(struct lbs_private *priv, u8 rate);
+
+int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
+				      uint16_t cmd_action);
+
+int lbs_set_tx_power(struct lbs_private *priv, s16 dbm);
+
+int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep);
+
 #endif /* _LBS_CMD_H */
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 23f6843..21d5769 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -11,6 +11,7 @@
 
 #include "host.h"
 #include "decl.h"
+#include "cmd.h"
 #include "defs.h"
 #include "dev.h"
 #include "assoc.h"
@@ -26,23 +27,17 @@
  */
 void lbs_mac_event_disconnected(struct lbs_private *priv)
 {
-	union iwreq_data wrqu;
-
 	if (priv->connect_status != LBS_CONNECTED)
 		return;
 
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
-	memset(wrqu.ap_addr.sa_data, 0x00, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
 	/*
 	 * Cisco AP sends EAP failure and de-auth in less than 0.5 ms.
 	 * It causes problem in the Supplicant
 	 */
-
 	msleep_interruptible(1000);
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+	lbs_send_disconnect_notification(priv);
 
 	/* report disconnect to upper layer */
 	netif_stop_queue(priv->dev);
@@ -67,7 +62,7 @@
 	 * no longer valid.
 	 */
 	memset(&priv->curbssparams.bssid, 0, ETH_ALEN);
-	memset(&priv->curbssparams.ssid, 0, IW_ESSID_MAX_SIZE);
+	memset(&priv->curbssparams.ssid, 0, IEEE80211_MAX_SSID_LEN);
 	priv->curbssparams.ssid_len = 0;
 
 	if (priv->psstate != PS_STATE_FULL_POWER) {
@@ -78,32 +73,6 @@
 	lbs_deb_leave(LBS_DEB_ASSOC);
 }
 
-/**
- *  @brief This function handles MIC failure event.
- *
- *  @param priv    A pointer to struct lbs_private structure
- *  @para  event   the event id
- *  @return 	   n/a
- */
-static void handle_mic_failureevent(struct lbs_private *priv, u32 event)
-{
-	char buf[50];
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	memset(buf, 0, sizeof(buf));
-
-	sprintf(buf, "%s", "MLME-MICHAELMICFAILURE.indication ");
-
-	if (event == MACREG_INT_CODE_MIC_ERR_UNICAST) {
-		strcat(buf, "unicast ");
-	} else {
-		strcat(buf, "multicast ");
-	}
-
-	lbs_send_iwevcustom_event(priv, buf);
-	lbs_deb_leave(LBS_DEB_CMD);
-}
-
 static int lbs_ret_reg_access(struct lbs_private *priv,
 			       u16 type, struct cmd_ds_command *resp)
 {
@@ -147,53 +116,6 @@
 	return ret;
 }
 
-static int lbs_ret_802_11_rssi(struct lbs_private *priv,
-				struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11_rssi_rsp *rssirsp = &resp->params.rssirsp;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	/* store the non average value */
-	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR);
-	priv->NF[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->noisefloor);
-
-	priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR);
-	priv->NF[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgnoisefloor);
-
-	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] =
-	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG],
-		     priv->NF[TYPE_BEACON][TYPE_NOAVG]);
-
-	priv->RSSI[TYPE_BEACON][TYPE_AVG] =
-	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_AVG] / AVG_SCALE,
-		     priv->NF[TYPE_BEACON][TYPE_AVG] / AVG_SCALE);
-
-	lbs_deb_cmd("RSSI: beacon %d, avg %d\n",
-	       priv->RSSI[TYPE_BEACON][TYPE_NOAVG],
-	       priv->RSSI[TYPE_BEACON][TYPE_AVG]);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
-static int lbs_ret_802_11_bcn_ctrl(struct lbs_private * priv,
-					struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11_beacon_control *bcn_ctrl =
-	    &resp->params.bcn_ctrl;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (bcn_ctrl->action == CMD_ACT_GET) {
-		priv->beacon_enable = (u8) le16_to_cpu(bcn_ctrl->beacon_enable);
-		priv->beacon_period = le16_to_cpu(bcn_ctrl->beacon_period);
-	}
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	return 0;
-}
-
 static inline int handle_cmd_response(struct lbs_private *priv,
 				      struct cmd_header *cmd_response)
 {
@@ -227,29 +149,13 @@
 		ret = lbs_ret_802_11_rssi(priv, resp);
 		break;
 
-	case CMD_RET(CMD_802_11D_DOMAIN_INFO):
-		ret = lbs_ret_802_11d_domain_info(resp);
-		break;
-
 	case CMD_RET(CMD_802_11_TPC_CFG):
 		spin_lock_irqsave(&priv->driver_lock, flags);
 		memmove((void *)priv->cur_cmd->callback_arg, &resp->params.tpccfg,
 			sizeof(struct cmd_ds_802_11_tpc_cfg));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		break;
-	case CMD_RET(CMD_802_11_LED_GPIO_CTRL):
-		spin_lock_irqsave(&priv->driver_lock, flags);
-		memmove((void *)priv->cur_cmd->callback_arg, &resp->params.ledgpio,
-			sizeof(struct cmd_ds_802_11_led_ctrl));
-		spin_unlock_irqrestore(&priv->driver_lock, flags);
-		break;
 
-	case CMD_RET(CMD_GET_TSF):
-		spin_lock_irqsave(&priv->driver_lock, flags);
-		memcpy((void *)priv->cur_cmd->callback_arg,
-		       &resp->params.gettsf.tsfvalue, sizeof(u64));
-		spin_unlock_irqrestore(&priv->driver_lock, flags);
-		break;
 	case CMD_RET(CMD_BT_ACCESS):
 		spin_lock_irqsave(&priv->driver_lock, flags);
 		if (priv->cur_cmd->callback_arg)
@@ -505,9 +411,21 @@
 
 	case MACREG_INT_CODE_HOST_AWAKE:
 		lbs_deb_cmd("EVENT: host awake\n");
+		if (priv->reset_deep_sleep_wakeup)
+			priv->reset_deep_sleep_wakeup(priv);
+		priv->is_deep_sleep = 0;
 		lbs_send_confirmwake(priv);
 		break;
 
+	case MACREG_INT_CODE_DEEP_SLEEP_AWAKE:
+		if (priv->reset_deep_sleep_wakeup)
+			priv->reset_deep_sleep_wakeup(priv);
+		lbs_deb_cmd("EVENT: ds awake\n");
+		priv->is_deep_sleep = 0;
+		priv->wakeup_dev_required = 0;
+		wake_up_interruptible(&priv->ds_awake_q);
+		break;
+
 	case MACREG_INT_CODE_PS_AWAKE:
 		lbs_deb_cmd("EVENT: ps awake\n");
 		/* handle unexpected PS AWAKE event */
@@ -533,12 +451,12 @@
 
 	case MACREG_INT_CODE_MIC_ERR_UNICAST:
 		lbs_deb_cmd("EVENT: UNICAST MIC ERROR\n");
-		handle_mic_failureevent(priv, MACREG_INT_CODE_MIC_ERR_UNICAST);
+		lbs_send_mic_failureevent(priv, event);
 		break;
 
 	case MACREG_INT_CODE_MIC_ERR_MULTICAST:
 		lbs_deb_cmd("EVENT: MULTICAST MIC ERROR\n");
-		handle_mic_failureevent(priv, MACREG_INT_CODE_MIC_ERR_MULTICAST);
+		lbs_send_mic_failureevent(priv, event);
 		break;
 
 	case MACREG_INT_CODE_MIB_CHANGED:
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 893a55c..587b0cb 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -451,10 +451,12 @@
 				CMD_MAC_REG_ACCESS, 0,
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
-	pos += snprintf(buf+pos, len-pos, "MAC[0x%x] = 0x%08x\n",
+	if (!ret) {
+		pos += snprintf(buf+pos, len-pos, "MAC[0x%x] = 0x%08x\n",
 				priv->mac_offset, priv->offsetvalue.value);
 
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+		ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+	}
 	free_page(addr);
 	return ret;
 }
@@ -514,7 +516,8 @@
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
 
-	res = count;
+	if (!res)
+		res = count;
 out_unlock:
 	free_page(addr);
 	return res;
@@ -539,10 +542,12 @@
 				CMD_BBP_REG_ACCESS, 0,
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
-	pos += snprintf(buf+pos, len-pos, "BBP[0x%x] = 0x%08x\n",
+	if (!ret) {
+		pos += snprintf(buf+pos, len-pos, "BBP[0x%x] = 0x%08x\n",
 				priv->bbp_offset, priv->offsetvalue.value);
 
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+		ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+	}
 	free_page(addr);
 
 	return ret;
@@ -603,7 +608,8 @@
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
 
-	res = count;
+	if (!res)
+		res = count;
 out_unlock:
 	free_page(addr);
 	return res;
@@ -628,10 +634,12 @@
 				CMD_RF_REG_ACCESS, 0,
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
-	pos += snprintf(buf+pos, len-pos, "RF[0x%x] = 0x%08x\n",
+	if (!ret) {
+		pos += snprintf(buf+pos, len-pos, "RF[0x%x] = 0x%08x\n",
 				priv->rf_offset, priv->offsetvalue.value);
 
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+		ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+	}
 	free_page(addr);
 
 	return ret;
@@ -692,7 +700,8 @@
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
 
-	res = count;
+	if (!res)
+		res = count;
 out_unlock:
 	free_page(addr);
 	return res;
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index 8b15380..709ffca 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -8,71 +8,46 @@
 
 #include <linux/netdevice.h>
 
-#include "defs.h"
 
-/** Function Prototype Declaration */
 struct lbs_private;
 struct sk_buff;
 struct net_device;
-struct cmd_ctrl_node;
-struct cmd_ds_command;
 
-void lbs_set_mac_control(struct lbs_private *priv);
 
+/* ethtool.c */
+extern const struct ethtool_ops lbs_ethtool_ops;
+
+
+/* tx.c */
 void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count);
-
-int lbs_free_cmd_buffer(struct lbs_private *priv);
-
-int lbs_prepare_and_send_command(struct lbs_private *priv,
-	u16 cmd_no,
-	u16 cmd_action,
-	u16 wait_option, u32 cmd_oid, void *pdata_buf);
-
-int lbs_allocate_cmd_buffer(struct lbs_private *priv);
-int lbs_execute_next_command(struct lbs_private *priv);
-int lbs_process_event(struct lbs_private *priv, u32 event);
-void lbs_queue_event(struct lbs_private *priv, u32 event);
-void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx);
-
-u32 lbs_fw_index_to_data_rate(u8 index);
-u8 lbs_data_rate_to_fw_index(u32 rate);
-
-/** The proc fs interface */
-int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len);
-void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
-			  int result);
 netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev);
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
 
+/* rx.c */
 int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *);
 
-void lbs_ps_sleep(struct lbs_private *priv, int wait_option);
-void lbs_ps_confirm_sleep(struct lbs_private *priv);
-void lbs_ps_wakeup(struct lbs_private *priv, int wait_option);
-
-struct chan_freq_power *lbs_find_cfp_by_band_and_channel(
-	struct lbs_private *priv,
-	u8 band,
-	u16 channel);
-
-void lbs_mac_event_disconnected(struct lbs_private *priv);
-
-void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str);
-
-/* persistcfg.c */
-void lbs_persist_config_init(struct net_device *net);
-void lbs_persist_config_remove(struct net_device *net);
 
 /* main.c */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region,
-	int *cfp_no);
 struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 void lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 void lbs_stop_card(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
-int lbs_update_channel(struct lbs_private *priv);
+int lbs_set_mac_address(struct net_device *dev, void *addr);
+void lbs_set_multicast_list(struct net_device *dev);
+
+int lbs_suspend(struct lbs_private *priv);
+void lbs_resume(struct lbs_private *priv);
+
+void lbs_queue_event(struct lbs_private *priv, u32 event);
+void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx);
+
+int lbs_enter_auto_deep_sleep(struct lbs_private *priv);
+int lbs_exit_auto_deep_sleep(struct lbs_private *priv);
+
+u32 lbs_fw_index_to_data_rate(u8 index);
+u8 lbs_data_rate_to_fw_index(u32 rate);
+
 
 #endif
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 72f3479..6b6ea9f 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -42,6 +42,7 @@
 #define LBS_DEB_SDIO	0x00400000
 #define LBS_DEB_SYSFS	0x00800000
 #define LBS_DEB_SPI	0x01000000
+#define LBS_DEB_CFG80211 0x02000000
 
 extern unsigned int lbs_debug;
 
@@ -86,6 +87,7 @@
 #define lbs_deb_sdio(fmt, args...)      LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
 #define lbs_deb_sysfs(fmt, args...)     LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
 #define lbs_deb_spi(fmt, args...)       LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
+#define lbs_deb_cfg80211(fmt, args...)  LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
 
 #define lbs_pr_info(format, args...) \
 	printk(KERN_INFO DRV_NAME": " format, ## args)
@@ -320,7 +322,6 @@
 extern const char lbs_driver_version[];
 extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
 
-extern u8 lbs_bg_rates[MAX_RATES];
 
 /** ENUM definition*/
 /** SNRNF_TYPE */
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index d3b69a4..6a8d2b2 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -6,75 +6,11 @@
 #ifndef _LBS_DEV_H_
 #define _LBS_DEV_H_
 
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/ethtool.h>
-#include <linux/debugfs.h>
+#include "mesh.h"
+#include "scan.h"
+#include "assoc.h"
 
-#include "defs.h"
-#include "hostcmd.h"
 
-extern const struct ethtool_ops lbs_ethtool_ops;
-
-#define	MAX_BSSID_PER_CHANNEL		16
-
-#define NR_TX_QUEUE			3
-
-/* For the extended Scan */
-#define MAX_EXTENDED_SCAN_BSSID_LIST    MAX_BSSID_PER_CHANNEL * \
-						MRVDRV_MAX_CHANNEL_SIZE + 1
-
-#define	MAX_REGION_CHANNEL_NUM	2
-
-/** Chan-freq-TxPower mapping table*/
-struct chan_freq_power {
-	/** channel Number		*/
-	u16 channel;
-	/** frequency of this channel	*/
-	u32 freq;
-	/** Max allowed Tx power level	*/
-	u16 maxtxpower;
-	/** TRUE:channel unsupported;  FLASE:supported*/
-	u8 unsupported;
-};
-
-/** region-band mapping table*/
-struct region_channel {
-	/** TRUE if this entry is valid		     */
-	u8 valid;
-	/** region code for US, Japan ...	     */
-	u8 region;
-	/** band B/G/A, used for BAND_CONFIG cmd	     */
-	u8 band;
-	/** Actual No. of elements in the array below */
-	u8 nrcfp;
-	/** chan-freq-txpower mapping table*/
-	struct chan_freq_power *CFP;
-};
-
-struct lbs_802_11_security {
-	u8 WPAenabled;
-	u8 WPA2enabled;
-	u8 wep_enabled;
-	u8 auth_mode;
-	u32 key_mgmt;
-};
-
-/** Current Basic Service Set State Structure */
-struct current_bss_params {
-	/** bssid */
-	u8 bssid[ETH_ALEN];
-	/** ssid */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	/** band */
-	u8 band;
-	/** channel */
-	u8 channel;
-	/** zero-terminated array of supported data rates */
-	u8 rates[MAX_RATES + 1];
-};
 
 /** sleep_params */
 struct sleep_params {
@@ -86,109 +22,99 @@
 	uint16_t sp_reserved;
 };
 
-/* Mesh statistics */
-struct lbs_mesh_stats {
-	u32	fwd_bcast_cnt;		/* Fwd: Broadcast counter */
-	u32	fwd_unicast_cnt;	/* Fwd: Unicast counter */
-	u32	fwd_drop_ttl;		/* Fwd: TTL zero */
-	u32	fwd_drop_rbt;		/* Fwd: Recently Broadcasted */
-	u32	fwd_drop_noroute; 	/* Fwd: No route to Destination */
-	u32	fwd_drop_nobuf;		/* Fwd: Run out of internal buffers */
-	u32	drop_blind;		/* Rx:  Dropped by blinding table */
-	u32	tx_failed_cnt;		/* Tx:  Failed transmissions */
-};
 
 /** Private structure for the MV device */
 struct lbs_private {
+
+	/* Basic networking */
+	struct net_device *dev;
+	u32 connect_status;
+	int infra_open;
+	struct work_struct mcast_work;
+	u32 nr_of_multicastmacaddr;
+	u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
+
+	/* CFG80211 */
+	struct wireless_dev *wdev;
+
+	/* Mesh */
+	struct net_device *mesh_dev; /* Virtual device */
+	u32 mesh_connect_status;
+	struct lbs_mesh_stats mstats;
 	int mesh_open;
 	int mesh_fw_ver;
-	int infra_open;
 	int mesh_autostart_enabled;
+	uint16_t mesh_tlv;
+	u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 mesh_ssid_len;
+	struct work_struct sync_channel;
 
-	char name[DEV_NAME_LEN];
-
-	void *card;
-	struct net_device *dev;
-
-	struct net_device *mesh_dev; /* Virtual device */
+	/* Monitor mode */
 	struct net_device *rtap_net_dev;
+	u32 monitormode;
 
-	struct iw_statistics wstats;
-	struct lbs_mesh_stats mstats;
+	/* Debugfs */
 	struct dentry *debugfs_dir;
 	struct dentry *debugfs_debug;
 	struct dentry *debugfs_files[6];
-
 	struct dentry *events_dir;
 	struct dentry *debugfs_events_files[6];
-
 	struct dentry *regs_dir;
 	struct dentry *debugfs_regs_files[6];
 
+	/* Hardware debugging */
 	u32 mac_offset;
 	u32 bbp_offset;
 	u32 rf_offset;
+	struct lbs_offset_value offsetvalue;
 
-	/* Download sent:
-	   bit0 1/0=data_sent/data_tx_done,
-	   bit1 1/0=cmd_sent/cmd_tx_done,
-	   all other bits reserved 0 */
-	u8 dnld_sent;
+	/* Power management */
+	u16 psmode;
+	u32 psstate;
+	u8 needtowakeup;
 
-	/** thread to service interrupts */
-	struct task_struct *main_thread;
-	wait_queue_head_t waitq;
-	struct workqueue_struct *work_thread;
+	/* Deep sleep */
+	int is_deep_sleep;
+	int is_auto_deep_sleep_enabled;
+	int wakeup_dev_required;
+	int is_activity_detected;
+	int auto_deep_sleep_timeout; /* in ms */
+	wait_queue_head_t ds_awake_q;
+	struct timer_list auto_deepsleep_timer;
 
-	struct work_struct mcast_work;
-
-	/** Scanning */
-	struct delayed_work scan_work;
-	struct delayed_work assoc_work;
-	struct work_struct sync_channel;
-	/* remember which channel was scanned last, != 0 if currently scanning */
-	int scan_channel;
-	u8 scan_ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 scan_ssid_len;
-
-	/** Hardware access */
+	/* Hardware access */
+	void *card;
+	u8 fw_ready;
+	u8 surpriseremoved;
 	int (*hw_host_to_card) (struct lbs_private *priv, u8 type, u8 *payload, u16 nb);
 	void (*reset_card) (struct lbs_private *priv);
+	int (*enter_deep_sleep) (struct lbs_private *priv);
+	int (*exit_deep_sleep) (struct lbs_private *priv);
+	int (*reset_deep_sleep_wakeup) (struct lbs_private *priv);
 
-	/* Wake On LAN */
-	uint32_t wol_criteria;
-	uint8_t wol_gpio;
-	uint8_t wol_gap;
-
-	/** Wlan adapter data structure*/
-	/** STATUS variables */
+	/* Adapter info (from EEPROM) */
 	u32 fwrelease;
 	u32 fwcapinfo;
+	u16 regioncode;
+	u8 current_addr[ETH_ALEN];
 
-	struct mutex lock;
-
-	/* TX packet ready to be sent... */
-	int tx_pending_len;		/* -1 while building packet */
-
-	u8 tx_pending_buf[LBS_UPLD_SIZE];
-	/* protected by hard_start_xmit serialization */
-
-	/** command-related variables */
+	/* Command download */
+	u8 dnld_sent;
+	/* bit0 1/0=data_sent/data_tx_done,
+	   bit1 1/0=cmd_sent/cmd_tx_done,
+	   all other bits reserved 0 */
 	u16 seqnum;
-
 	struct cmd_ctrl_node *cmd_array;
-	/** Current command */
 	struct cmd_ctrl_node *cur_cmd;
-	int cur_cmd_retcode;
-	/** command Queues */
-	/** Free command buffers */
-	struct list_head cmdfreeq;
-	/** Pending command buffers */
-	struct list_head cmdpendingq;
-
+	struct list_head cmdfreeq;    /* free command buffers */
+	struct list_head cmdpendingq; /* pending command buffers */
 	wait_queue_head_t cmd_pending;
+	struct timer_list command_timer;
+	int nr_retries;
+	int cmd_timed_out;
 
 	/* Command responses sent from the hardware to the driver */
+	int cur_cmd_retcode;
 	u8 resp_idx;
 	u8 resp_buf[2][LBS_UPLD_SIZE];
 	u32 resp_len[2];
@@ -196,95 +122,76 @@
 	/* Events sent from hardware to driver */
 	struct kfifo *event_fifo;
 
-	/* nickname */
-	u8 nodename[16];
+	/** thread to service interrupts */
+	struct task_struct *main_thread;
+	wait_queue_head_t waitq;
+	struct workqueue_struct *work_thread;
 
-	/** spin locks */
-	spinlock_t driver_lock;
+	/** Encryption stuff */
+	struct lbs_802_11_security secinfo;
+	struct enc_key wpa_mcast_key;
+	struct enc_key wpa_unicast_key;
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	u8 wpa_ie_len;
+	u16 wep_tx_keyidx;
+	struct enc_key wep_keys[4];
 
-	/** Timers */
-	struct timer_list command_timer;
-	int nr_retries;
-	int cmd_timed_out;
+	/* Wake On LAN */
+	uint32_t wol_criteria;
+	uint8_t wol_gpio;
+	uint8_t wol_gap;
 
-	/** current ssid/bssid related parameters*/
-	struct current_bss_params curbssparams;
-
-	uint16_t mesh_tlv;
-	u8 mesh_ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 mesh_ssid_len;
-
-	/* IW_MODE_* */
-	u8 mode;
-
-	/* Scan results list */
-	struct list_head network_list;
-	struct list_head network_free_list;
-	struct bss_descriptor *networks;
-
-	u16 beacon_period;
-	u8 beacon_enable;
-	u8 adhoccreate;
-
-	/** capability Info used in Association, start, join */
-	u16 capability;
-
-	/** MAC address information */
-	u8 current_addr[ETH_ALEN];
-	u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
-	u32 nr_of_multicastmacaddr;
-
-	/** 802.11 statistics */
-//	struct cmd_DS_802_11_GET_STAT wlan802_11Stat;
-
-	uint16_t enablehwauto;
-	uint16_t ratebitmap;
-
+	/* Transmitting */
+	int tx_pending_len;		/* -1 while building packet */
+	u8 tx_pending_buf[LBS_UPLD_SIZE];
+	/* protected by hard_start_xmit serialization */
 	u8 txretrycount;
-
-	/** Tx-related variables (for single packet tx) */
 	struct sk_buff *currenttxskb;
 
-	/** NIC Operation characteristics */
+	/* Locks */
+	struct mutex lock;
+	spinlock_t driver_lock;
+
+	/* NIC/link operation characteristics */
 	u16 mac_control;
-	u32 connect_status;
-	u32 mesh_connect_status;
-	u16 regioncode;
+	u8 radio_on;
+	u8 channel;
 	s16 txpower_cur;
 	s16 txpower_min;
 	s16 txpower_max;
 
-	/** POWER MANAGEMENT AND PnP SUPPORT */
-	u8 surpriseremoved;
+	/** Scanning */
+	struct delayed_work scan_work;
+	int scan_channel;
+	/* remember which channel was scanned last, != 0 if currently scanning */
+	u8 scan_ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 scan_ssid_len;
 
-	u16 psmode;		/* Wlan802_11PowermodeCAM=disable
-				   Wlan802_11PowermodeMAX_PSP=enable */
-	u32 psstate;
-	u8 needtowakeup;
-
+	/* Associating */
+	struct delayed_work assoc_work;
+	struct current_bss_params curbssparams;
+	u8 mode;
+	struct list_head network_list;
+	struct list_head network_free_list;
+	struct bss_descriptor *networks;
 	struct assoc_request * pending_assoc_req;
 	struct assoc_request * in_progress_assoc_req;
+	u16 capability;
+	uint16_t enablehwauto;
+	uint16_t ratebitmap;
 
-	/** Encryption parameter */
-	struct lbs_802_11_security secinfo;
+	/* ADHOC */
+	u16 beacon_period;
+	u8 beacon_enable;
+	u8 adhoccreate;
 
-	/** WEP keys */
-	struct enc_key wep_keys[4];
-	u16 wep_tx_keyidx;
-
-	/** WPA keys */
-	struct enc_key wpa_mcast_key;
-	struct enc_key wpa_unicast_key;
-
-/*
- * In theory, the IE is limited to the IE length, 255,
- * but in practice 64 bytes are enough.
- */
-#define MAX_WPA_IE_LEN 64
-
-	/** WPA Information Elements*/
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	u8 wpa_ie_len;
+	/* WEXT */
+	char name[DEV_NAME_LEN];
+	u8 nodename[16];
+	struct iw_statistics wstats;
+	u8 cur_rate;
+#define	MAX_REGION_CHANNEL_NUM	2
+	struct region_channel region_channel[MAX_REGION_CHANNEL_NUM];
 
 	/** Requested Signal Strength*/
 	u16 SNR[MAX_TYPE_B][MAX_TYPE_AVG];
@@ -294,116 +201,8 @@
 	u8 rawNF[DEFAULT_DATA_AVG_FACTOR];
 	u16 nextSNRNF;
 	u16 numSNRNF;
-
-	u8 radio_on;
-
-	/** data rate stuff */
-	u8 cur_rate;
-
-	/** RF calibration data */
-
-#define	MAX_REGION_CHANNEL_NUM	2
-	/** region channel data */
-	struct region_channel region_channel[MAX_REGION_CHANNEL_NUM];
-
-	struct region_channel universal_channel[MAX_REGION_CHANNEL_NUM];
-
-	/** 11D and Domain Regulatory Data */
-	struct lbs_802_11d_domain_reg domainreg;
-	struct parsed_region_chan_11d parsed_region_chan;
-
-	/** FSM variable for 11d support */
-	u32 enable11d;
-
-	/**	MISCELLANEOUS */
-	struct lbs_offset_value offsetvalue;
-
-	u32 monitormode;
-	u8 fw_ready;
 };
 
 extern struct cmd_confirm_sleep confirm_sleep;
 
-/**
- *  @brief Structure used to store information for each beacon/probe response
- */
-struct bss_descriptor {
-	u8 bssid[ETH_ALEN];
-
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	u16 capability;
-	u32 rssi;
-	u32 channel;
-	u16 beaconperiod;
-	__le16 atimwindow;
-
-	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
-	u8 mode;
-
-	/* zero-terminated array of supported data rates */
-	u8 rates[MAX_RATES + 1];
-
-	unsigned long last_scanned;
-
-	union ieee_phy_param_set phy;
-	union ieee_ss_param_set ss;
-
-	struct ieee_ie_country_info_full_set countryinfo;
-
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-
-	u8 mesh;
-
-	struct list_head list;
-};
-
-/** Association request
- *
- * Encapsulates all the options that describe a specific assocation request
- * or configuration of the wireless card's radio, mode, and security settings.
- */
-struct assoc_request {
-#define ASSOC_FLAG_SSID			1
-#define ASSOC_FLAG_CHANNEL		2
-#define ASSOC_FLAG_BAND			3
-#define ASSOC_FLAG_MODE			4
-#define ASSOC_FLAG_BSSID		5
-#define ASSOC_FLAG_WEP_KEYS		6
-#define ASSOC_FLAG_WEP_TX_KEYIDX	7
-#define ASSOC_FLAG_WPA_MCAST_KEY	8
-#define ASSOC_FLAG_WPA_UCAST_KEY	9
-#define ASSOC_FLAG_SECINFO		10
-#define ASSOC_FLAG_WPA_IE		11
-	unsigned long flags;
-
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-	u8 channel;
-	u8 band;
-	u8 mode;
-	u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
-
-	/** WEP keys */
-	struct enc_key wep_keys[4];
-	u16 wep_tx_keyidx;
-
-	/** WPA keys */
-	struct enc_key wpa_mcast_key;
-	struct enc_key wpa_unicast_key;
-
-	struct lbs_802_11_security secinfo;
-
-	/** WPA Information Elements*/
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	u8 wpa_ie_len;
-
-	/* BSS to associate with for infrastructure of Ad-Hoc join */
-	struct bss_descriptor bss;
-};
-
 #endif
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index 53d56ab..63d0203 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -8,17 +8,8 @@
 #include "dev.h"
 #include "wext.h"
 #include "cmd.h"
+#include "mesh.h"
 
-static const char * mesh_stat_strings[]= {
-			"drop_duplicate_bcast",
-			"drop_ttl_zero",
-			"drop_no_fwd_route",
-			"drop_no_buffers",
-			"fwded_unicast_cnt",
-			"fwded_bcast_cnt",
-			"drop_blind_table",
-			"tx_failed_cnt"
-};
 
 static void lbs_ethtool_get_drvinfo(struct net_device *dev,
 					 struct ethtool_drvinfo *info)
@@ -73,73 +64,6 @@
         return ret;
 }
 
-static void lbs_ethtool_get_stats(struct net_device *dev,
-				  struct ethtool_stats *stats, uint64_t *data)
-{
-	struct lbs_private *priv = dev->ml_priv;
-	struct cmd_ds_mesh_access mesh_access;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_ETHTOOL);
-
-	/* Get Mesh Statistics */
-	ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
-
-	if (ret) {
-		memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
-		return;
-	}
-
-	priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
-	priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
-	priv->mstats.fwd_drop_noroute = le32_to_cpu(mesh_access.data[2]);
-	priv->mstats.fwd_drop_nobuf = le32_to_cpu(mesh_access.data[3]);
-	priv->mstats.fwd_unicast_cnt = le32_to_cpu(mesh_access.data[4]);
-	priv->mstats.fwd_bcast_cnt = le32_to_cpu(mesh_access.data[5]);
-	priv->mstats.drop_blind = le32_to_cpu(mesh_access.data[6]);
-	priv->mstats.tx_failed_cnt = le32_to_cpu(mesh_access.data[7]);
-
-	data[0] = priv->mstats.fwd_drop_rbt;
-	data[1] = priv->mstats.fwd_drop_ttl;
-	data[2] = priv->mstats.fwd_drop_noroute;
-	data[3] = priv->mstats.fwd_drop_nobuf;
-	data[4] = priv->mstats.fwd_unicast_cnt;
-	data[5] = priv->mstats.fwd_bcast_cnt;
-	data[6] = priv->mstats.drop_blind;
-	data[7] = priv->mstats.tx_failed_cnt;
-
-	lbs_deb_enter(LBS_DEB_ETHTOOL);
-}
-
-static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
-{
-	struct lbs_private *priv = dev->ml_priv;
-
-	if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
-		return MESH_STATS_NUM;
-
-	return -EOPNOTSUPP;
-}
-
-static void lbs_ethtool_get_strings(struct net_device *dev,
-				    uint32_t stringset, uint8_t *s)
-{
-	int i;
-
-	lbs_deb_enter(LBS_DEB_ETHTOOL);
-
-	switch (stringset) {
-        case ETH_SS_STATS:
-		for (i=0; i < MESH_STATS_NUM; i++) {
-			memcpy(s + i * ETH_GSTRING_LEN,
-					mesh_stat_strings[i],
-					ETH_GSTRING_LEN);
-		}
-		break;
-        }
-	lbs_deb_enter(LBS_DEB_ETHTOOL);
-}
-
 static void lbs_ethtool_get_wol(struct net_device *dev,
 				struct ethtool_wolinfo *wol)
 {
@@ -190,9 +114,9 @@
 	.get_drvinfo = lbs_ethtool_get_drvinfo,
 	.get_eeprom =  lbs_ethtool_get_eeprom,
 	.get_eeprom_len = lbs_ethtool_get_eeprom_len,
-	.get_sset_count = lbs_ethtool_get_sset_count,
-	.get_ethtool_stats = lbs_ethtool_get_stats,
-	.get_strings = lbs_ethtool_get_strings,
+	.get_sset_count = lbs_mesh_ethtool_get_sset_count,
+	.get_ethtool_stats = lbs_mesh_ethtool_get_stats,
+	.get_strings = lbs_mesh_ethtool_get_strings,
 	.get_wol = lbs_ethtool_get_wol,
 	.set_wol = lbs_ethtool_set_wol,
 };
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index fe8f0cb..3809c0b 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -1,201 +1,190 @@
 /**
-  * This file contains definitions of WLAN commands.
+  * This file function prototypes, data structure
+  * and  definitions for all the host/station commands
   */
 
 #ifndef _LBS_HOST_H_
 #define _LBS_HOST_H_
 
-/** PUBLIC DEFINITIONS */
-#define DEFAULT_AD_HOC_CHANNEL			6
-#define	DEFAULT_AD_HOC_CHANNEL_A		36
+#include "types.h"
+#include "defs.h"
 
-#define CMD_OPTION_WAITFORRSP			0x0002
+#define DEFAULT_AD_HOC_CHANNEL                  6
+
+#define CMD_OPTION_WAITFORRSP                   0x0002
 
 /** Host command IDs */
 
 /* Return command are almost always the same as the host command, but with
  * bit 15 set high.  There are a few exceptions, though...
  */
-#define CMD_RET(cmd)			(0x8000 | cmd)
+#define CMD_RET(cmd)                            (0x8000 | cmd)
 
 /* Return command convention exceptions: */
-#define CMD_RET_802_11_ASSOCIATE		0x8012
+#define CMD_RET_802_11_ASSOCIATE                0x8012
 
 /* Command codes */
-#define CMD_GET_HW_SPEC				0x0003
-#define	CMD_EEPROM_UPDATE			0x0004
-#define CMD_802_11_RESET			0x0005
-#define	CMD_802_11_SCAN				0x0006
-#define CMD_802_11_GET_LOG			0x000b
-#define CMD_MAC_MULTICAST_ADR			0x0010
-#define CMD_802_11_AUTHENTICATE			0x0011
-#define CMD_802_11_EEPROM_ACCESS		0x0059
-#define CMD_802_11_ASSOCIATE			0x0050
-#define CMD_802_11_SET_WEP			0x0013
-#define CMD_802_11_GET_STAT			0x0014
-#define CMD_802_3_GET_STAT			0x0015
-#define CMD_802_11_SNMP_MIB			0x0016
-#define CMD_MAC_REG_MAP				0x0017
-#define CMD_BBP_REG_MAP				0x0018
-#define CMD_MAC_REG_ACCESS			0x0019
-#define CMD_BBP_REG_ACCESS			0x001a
-#define CMD_RF_REG_ACCESS			0x001b
-#define CMD_802_11_RADIO_CONTROL		0x001c
-#define CMD_802_11_RF_CHANNEL			0x001d
-#define CMD_802_11_RF_TX_POWER			0x001e
-#define CMD_802_11_RSSI				0x001f
-#define CMD_802_11_RF_ANTENNA			0x0020
-#define CMD_802_11_PS_MODE			0x0021
-#define CMD_802_11_DATA_RATE			0x0022
-#define CMD_RF_REG_MAP				0x0023
-#define CMD_802_11_DEAUTHENTICATE		0x0024
-#define CMD_802_11_REASSOCIATE			0x0025
-#define CMD_MAC_CONTROL				0x0028
-#define CMD_802_11_AD_HOC_START			0x002b
-#define CMD_802_11_AD_HOC_JOIN			0x002c
-#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS	0x002e
-#define CMD_802_11_ENABLE_RSN			0x002f
-#define CMD_802_11_SET_AFC			0x003c
-#define CMD_802_11_GET_AFC			0x003d
-#define CMD_802_11_AD_HOC_STOP			0x0040
-#define CMD_802_11_HOST_SLEEP_CFG		0x0043
-#define CMD_802_11_WAKEUP_CONFIRM		0x0044
-#define CMD_802_11_HOST_SLEEP_ACTIVATE		0x0045
-#define CMD_802_11_BEACON_STOP			0x0049
-#define CMD_802_11_MAC_ADDRESS			0x004d
-#define CMD_802_11_LED_GPIO_CTRL		0x004e
-#define CMD_802_11_EEPROM_ACCESS		0x0059
-#define CMD_802_11_BAND_CONFIG			0x0058
-#define CMD_GSPI_BUS_CONFIG			0x005a
-#define CMD_802_11D_DOMAIN_INFO			0x005b
-#define CMD_802_11_KEY_MATERIAL			0x005e
-#define CMD_802_11_SLEEP_PARAMS			0x0066
-#define CMD_802_11_INACTIVITY_TIMEOUT		0x0067
-#define CMD_802_11_SLEEP_PERIOD			0x0068
-#define CMD_802_11_TPC_CFG			0x0072
-#define CMD_802_11_PA_CFG			0x0073
-#define CMD_802_11_FW_WAKE_METHOD		0x0074
-#define CMD_802_11_SUBSCRIBE_EVENT		0x0075
-#define CMD_802_11_RATE_ADAPT_RATESET		0x0076
-#define CMD_802_11_TX_RATE_QUERY		0x007f
-#define	CMD_GET_TSF				0x0080
-#define CMD_BT_ACCESS				0x0087
-#define CMD_FWT_ACCESS				0x0095
-#define CMD_802_11_MONITOR_MODE			0x0098
-#define CMD_MESH_ACCESS				0x009b
-#define CMD_MESH_CONFIG_OLD			0x00a3
-#define CMD_MESH_CONFIG				0x00ac
-#define	CMD_SET_BOOT2_VER			0x00a5
-#define	CMD_FUNC_INIT				0x00a9
-#define	CMD_FUNC_SHUTDOWN			0x00aa
-#define CMD_802_11_BEACON_CTRL			0x00b0
+#define CMD_GET_HW_SPEC                         0x0003
+#define CMD_EEPROM_UPDATE                       0x0004
+#define CMD_802_11_RESET                        0x0005
+#define CMD_802_11_SCAN                         0x0006
+#define CMD_802_11_GET_LOG                      0x000b
+#define CMD_MAC_MULTICAST_ADR                   0x0010
+#define CMD_802_11_AUTHENTICATE                 0x0011
+#define CMD_802_11_EEPROM_ACCESS                0x0059
+#define CMD_802_11_ASSOCIATE                    0x0050
+#define CMD_802_11_SET_WEP                      0x0013
+#define CMD_802_11_GET_STAT                     0x0014
+#define CMD_802_3_GET_STAT                      0x0015
+#define CMD_802_11_SNMP_MIB                     0x0016
+#define CMD_MAC_REG_MAP                         0x0017
+#define CMD_BBP_REG_MAP                         0x0018
+#define CMD_MAC_REG_ACCESS                      0x0019
+#define CMD_BBP_REG_ACCESS                      0x001a
+#define CMD_RF_REG_ACCESS                       0x001b
+#define CMD_802_11_RADIO_CONTROL                0x001c
+#define CMD_802_11_RF_CHANNEL                   0x001d
+#define CMD_802_11_RF_TX_POWER                  0x001e
+#define CMD_802_11_RSSI                         0x001f
+#define CMD_802_11_RF_ANTENNA                   0x0020
+#define CMD_802_11_PS_MODE                      0x0021
+#define CMD_802_11_DATA_RATE                    0x0022
+#define CMD_RF_REG_MAP                          0x0023
+#define CMD_802_11_DEAUTHENTICATE               0x0024
+#define CMD_802_11_REASSOCIATE                  0x0025
+#define CMD_MAC_CONTROL                         0x0028
+#define CMD_802_11_AD_HOC_START                 0x002b
+#define CMD_802_11_AD_HOC_JOIN                  0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
+#define CMD_802_11_ENABLE_RSN                   0x002f
+#define CMD_802_11_SET_AFC                      0x003c
+#define CMD_802_11_GET_AFC                      0x003d
+#define CMD_802_11_DEEP_SLEEP                   0x003e
+#define CMD_802_11_AD_HOC_STOP                  0x0040
+#define CMD_802_11_HOST_SLEEP_CFG               0x0043
+#define CMD_802_11_WAKEUP_CONFIRM               0x0044
+#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
+#define CMD_802_11_BEACON_STOP                  0x0049
+#define CMD_802_11_MAC_ADDRESS                  0x004d
+#define CMD_802_11_LED_GPIO_CTRL                0x004e
+#define CMD_802_11_EEPROM_ACCESS                0x0059
+#define CMD_802_11_BAND_CONFIG                  0x0058
+#define CMD_GSPI_BUS_CONFIG                     0x005a
+#define CMD_802_11D_DOMAIN_INFO                 0x005b
+#define CMD_802_11_KEY_MATERIAL                 0x005e
+#define CMD_802_11_SLEEP_PARAMS                 0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
+#define CMD_802_11_SLEEP_PERIOD                 0x0068
+#define CMD_802_11_TPC_CFG                      0x0072
+#define CMD_802_11_PA_CFG                       0x0073
+#define CMD_802_11_FW_WAKE_METHOD               0x0074
+#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
+#define CMD_802_11_TX_RATE_QUERY                0x007f
+#define CMD_GET_TSF                             0x0080
+#define CMD_BT_ACCESS                           0x0087
+#define CMD_FWT_ACCESS                          0x0095
+#define CMD_802_11_MONITOR_MODE                 0x0098
+#define CMD_MESH_ACCESS                         0x009b
+#define CMD_MESH_CONFIG_OLD                     0x00a3
+#define CMD_MESH_CONFIG                         0x00ac
+#define CMD_SET_BOOT2_VER                       0x00a5
+#define CMD_FUNC_INIT                           0x00a9
+#define CMD_FUNC_SHUTDOWN                       0x00aa
+#define CMD_802_11_BEACON_CTRL                  0x00b0
 
 /* For the IEEE Power Save */
-#define CMD_SUBCMD_ENTER_PS		0x0030
-#define CMD_SUBCMD_EXIT_PS		0x0031
-#define CMD_SUBCMD_SLEEP_CONFIRMED	0x0034
-#define CMD_SUBCMD_FULL_POWERDOWN	0x0035
-#define CMD_SUBCMD_FULL_POWERUP		0x0036
+#define CMD_SUBCMD_ENTER_PS                     0x0030
+#define CMD_SUBCMD_EXIT_PS                      0x0031
+#define CMD_SUBCMD_SLEEP_CONFIRMED              0x0034
+#define CMD_SUBCMD_FULL_POWERDOWN               0x0035
+#define CMD_SUBCMD_FULL_POWERUP                 0x0036
 
-#define CMD_ENABLE_RSN			0x0001
-#define CMD_DISABLE_RSN			0x0000
+#define CMD_ENABLE_RSN                          0x0001
+#define CMD_DISABLE_RSN                         0x0000
 
-#define CMD_ACT_GET			0x0000
-#define CMD_ACT_SET			0x0001
-#define CMD_ACT_GET_AES			0x0002
-#define CMD_ACT_SET_AES			0x0003
-#define CMD_ACT_REMOVE_AES		0x0004
+#define CMD_ACT_GET                             0x0000
+#define CMD_ACT_SET                             0x0001
 
 /* Define action or option for CMD_802_11_SET_WEP */
-#define CMD_ACT_ADD			0x0002
-#define CMD_ACT_REMOVE			0x0004
-#define CMD_ACT_USE_DEFAULT		0x0008
+#define CMD_ACT_ADD                             0x0002
+#define CMD_ACT_REMOVE                          0x0004
 
-#define CMD_TYPE_WEP_40_BIT		0x01
-#define CMD_TYPE_WEP_104_BIT		0x02
+#define CMD_TYPE_WEP_40_BIT                     0x01
+#define CMD_TYPE_WEP_104_BIT                    0x02
 
-#define CMD_NUM_OF_WEP_KEYS		4
+#define CMD_NUM_OF_WEP_KEYS                     4
 
-#define CMD_WEP_KEY_INDEX_MASK		0x3fff
-
-/* Define action or option for CMD_802_11_RESET */
-#define CMD_ACT_HALT			0x0003
+#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
 
 /* Define action or option for CMD_802_11_SCAN */
-#define CMD_BSS_TYPE_BSS		0x0001
-#define CMD_BSS_TYPE_IBSS		0x0002
-#define CMD_BSS_TYPE_ANY		0x0003
+#define CMD_BSS_TYPE_BSS                        0x0001
+#define CMD_BSS_TYPE_IBSS                       0x0002
+#define CMD_BSS_TYPE_ANY                        0x0003
 
 /* Define action or option for CMD_802_11_SCAN */
-#define CMD_SCAN_TYPE_ACTIVE		0x0000
-#define CMD_SCAN_TYPE_PASSIVE		0x0001
+#define CMD_SCAN_TYPE_ACTIVE                    0x0000
+#define CMD_SCAN_TYPE_PASSIVE                   0x0001
 
-#define CMD_SCAN_RADIO_TYPE_BG		0
+#define CMD_SCAN_RADIO_TYPE_BG                  0
 
-#define	CMD_SCAN_PROBE_DELAY_TIME	0
+#define CMD_SCAN_PROBE_DELAY_TIME               0
 
 /* Define action or option for CMD_MAC_CONTROL */
-#define CMD_ACT_MAC_RX_ON			0x0001
-#define CMD_ACT_MAC_TX_ON			0x0002
-#define CMD_ACT_MAC_LOOPBACK_ON			0x0004
-#define CMD_ACT_MAC_WEP_ENABLE			0x0008
-#define CMD_ACT_MAC_INT_ENABLE			0x0010
-#define CMD_ACT_MAC_MULTICAST_ENABLE		0x0020
-#define CMD_ACT_MAC_BROADCAST_ENABLE		0x0040
-#define CMD_ACT_MAC_PROMISCUOUS_ENABLE		0x0080
-#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE	0x0100
-#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE	0x0400
+#define CMD_ACT_MAC_RX_ON                       0x0001
+#define CMD_ACT_MAC_TX_ON                       0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
+#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
+#define CMD_ACT_MAC_INT_ENABLE                  0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 
 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
-#define CMD_SUBSCRIBE_RSSI_LOW		0x0001
-#define CMD_SUBSCRIBE_SNR_LOW		0x0002
-#define CMD_SUBSCRIBE_FAILCOUNT		0x0004
-#define CMD_SUBSCRIBE_BCNMISS		0x0008
-#define CMD_SUBSCRIBE_RSSI_HIGH		0x0010
-#define CMD_SUBSCRIBE_SNR_HIGH		0x0020
+#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
+#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
+#define CMD_SUBSCRIBE_BCNMISS                   0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
 
-#define RADIO_PREAMBLE_LONG	0x00
-#define RADIO_PREAMBLE_SHORT	0x02
-#define RADIO_PREAMBLE_AUTO	0x04
+#define RADIO_PREAMBLE_LONG                     0x00
+#define RADIO_PREAMBLE_SHORT                    0x02
+#define RADIO_PREAMBLE_AUTO                     0x04
 
 /* Define action or option for CMD_802_11_RF_CHANNEL */
-#define CMD_OPT_802_11_RF_CHANNEL_GET	0x00
-#define CMD_OPT_802_11_RF_CHANNEL_SET	0x01
+#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
 
 /* Define action or option for CMD_802_11_DATA_RATE */
-#define CMD_ACT_SET_TX_AUTO		0x0000
-#define CMD_ACT_SET_TX_FIX_RATE		0x0001
-#define CMD_ACT_GET_TX_RATE		0x0002
-
-#define CMD_ACT_SET_RX			0x0001
-#define	CMD_ACT_SET_TX			0x0002
-#define CMD_ACT_SET_BOTH		0x0003
-#define	CMD_ACT_GET_RX			0x0004
-#define CMD_ACT_GET_TX			0x0008
-#define	CMD_ACT_GET_BOTH		0x000c
+#define CMD_ACT_SET_TX_AUTO                     0x0000
+#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
+#define CMD_ACT_GET_TX_RATE                     0x0002
 
 /* Define action or option for CMD_802_11_PS_MODE */
-#define CMD_TYPE_CAM			0x0000
-#define	CMD_TYPE_MAX_PSP		0x0001
-#define CMD_TYPE_FAST_PSP		0x0002
+#define CMD_TYPE_CAM                            0x0000
+#define CMD_TYPE_MAX_PSP                        0x0001
+#define CMD_TYPE_FAST_PSP                       0x0002
 
 /* Options for CMD_802_11_FW_WAKE_METHOD */
-#define CMD_WAKE_METHOD_UNCHANGED	0x0000
-#define CMD_WAKE_METHOD_COMMAND_INT	0x0001
-#define CMD_WAKE_METHOD_GPIO		0x0002
+#define CMD_WAKE_METHOD_UNCHANGED               0x0000
+#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
+#define CMD_WAKE_METHOD_GPIO                    0x0002
 
 /* Object IDs for CMD_802_11_SNMP_MIB */
-#define SNMP_MIB_OID_BSS_TYPE		0x0000
-#define SNMP_MIB_OID_OP_RATE_SET	0x0001
-#define SNMP_MIB_OID_BEACON_PERIOD	0x0002  /* Reserved on v9+ */
-#define SNMP_MIB_OID_DTIM_PERIOD	0x0003  /* Reserved on v9+ */
-#define SNMP_MIB_OID_ASSOC_TIMEOUT	0x0004  /* Reserved on v9+ */
-#define SNMP_MIB_OID_RTS_THRESHOLD	0x0005
-#define SNMP_MIB_OID_SHORT_RETRY_LIMIT	0x0006
-#define SNMP_MIB_OID_LONG_RETRY_LIMIT	0x0007
-#define SNMP_MIB_OID_FRAG_THRESHOLD	0x0008
-#define SNMP_MIB_OID_11D_ENABLE		0x0009
-#define SNMP_MIB_OID_11H_ENABLE		0x000A
+#define SNMP_MIB_OID_BSS_TYPE                   0x0000
+#define SNMP_MIB_OID_OP_RATE_SET                0x0001
+#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
+#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
+#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
+#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
+#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
+#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
+#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
+#define SNMP_MIB_OID_11D_ENABLE                 0x0009
+#define SNMP_MIB_OID_11H_ENABLE                 0x000A
 
 /* Define action or option for CMD_BT_ACCESS */
 enum cmd_bt_access_opts {
@@ -302,4 +291,672 @@
 #define MACREG_INT_CODE_MESH_AUTO_STARTED	35
 #define MACREG_INT_CODE_FIRMWARE_READY		48
 
+
+/* 802.11-related definitions */
+
+/* TxPD descriptor */
+struct txpd {
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Tx packet status */
+		__le32 tx_status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+			/* Reserved */
+			__le16 reserved;
+		} bss;
+	} u;
+	/* Tx control */
+	__le32 tx_control;
+	__le32 tx_packet_location;
+	/* Tx packet length */
+	__le16 tx_packet_length;
+	/* First 2 byte of destination MAC address */
+	u8 tx_dest_addr_high[2];
+	/* Last 4 byte of destination MAC address */
+	u8 tx_dest_addr_low[4];
+	/* Pkt Priority */
+	u8 priority;
+	/* Pkt Trasnit Power control */
+	u8 powermgmt;
+	/* Amount of time the packet has been queued (units = 2ms) */
+	u8 pktdelay_2ms;
+	/* reserved */
+	u8 reserved1;
+} __attribute__ ((packed));
+
+/* RxPD Descriptor */
+struct rxpd {
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Rx packet status */
+		__le16 status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+		} __attribute__ ((packed)) bss;
+	} __attribute__ ((packed)) u;
+
+	/* SNR */
+	u8 snr;
+
+	/* Tx control */
+	u8 rx_control;
+
+	/* Pkt length */
+	__le16 pkt_len;
+
+	/* Noise Floor */
+	u8 nf;
+
+	/* Rx Packet Rate */
+	u8 rx_rate;
+
+	/* Pkt addr */
+	__le32 pkt_ptr;
+
+	/* Next Rx RxPD addr */
+	__le32 next_rxpd_ptr;
+
+	/* Pkt Priority */
+	u8 priority;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_header {
+	__le16 command;
+	__le16 size;
+	__le16 seqnum;
+	__le16 result;
+} __attribute__ ((packed));
+
+/* Generic structure to hold all key types. */
+struct enc_key {
+	u16 len;
+	u16 flags;  /* KEY_INFO_* from defs.h */
+	u16 type; /* KEY_TYPE_* from defs.h */
+	u8 key[32];
+};
+
+/* lbs_offset_value */
+struct lbs_offset_value {
+	u32 offset;
+	u32 value;
+} __attribute__ ((packed));
+
+/*
+ * Define data structure for CMD_GET_HW_SPEC
+ * This structure defines the response for the GET_HW_SPEC command
+ */
+struct cmd_ds_get_hw_spec {
+	struct cmd_header hdr;
+
+	/* HW Interface version number */
+	__le16 hwifversion;
+	/* HW version number */
+	__le16 version;
+	/* Max number of TxPD FW can handle */
+	__le16 nr_txpd;
+	/* Max no of Multicast address */
+	__le16 nr_mcast_adr;
+	/* MAC address */
+	u8 permanentaddr[6];
+
+	/* region Code */
+	__le16 regioncode;
+
+	/* Number of antenna used */
+	__le16 nr_antenna;
+
+	/* FW release number, example 0x01030304 = 2.3.4p1 */
+	__le32 fwrelease;
+
+	/* Base Address of TxPD queue */
+	__le32 wcb_base;
+	/* Read Pointer of RxPd queue */
+	__le32 rxpd_rdptr;
+
+	/* Write Pointer of RxPd queue */
+	__le32 rxpd_wrptr;
+
+	/*FW/HW capability */
+	__le32 fwcapinfo;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_subscribe_event {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 events;
+
+	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
+	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
+	 * 40 bytes. However, future firmware might add additional TLVs, so I
+	 * bump this up a bit.
+	 */
+	uint8_t tlv[128];
+} __attribute__ ((packed));
+
+/*
+ * This scan handle Country Information IE(802.11d compliant)
+ * Define data structure for CMD_802_11_SCAN
+ */
+struct cmd_ds_802_11_scan {
+	struct cmd_header hdr;
+
+	uint8_t bsstype;
+	uint8_t bssid[ETH_ALEN];
+	uint8_t tlvbuffer[0];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_scan_rsp {
+	struct cmd_header hdr;
+
+	__le16 bssdescriptsize;
+	uint8_t nr_sets;
+	uint8_t bssdesc_and_tlvbuffer[0];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_get_log {
+	struct cmd_header hdr;
+
+	__le32 mcasttxframe;
+	__le32 failed;
+	__le32 retry;
+	__le32 multiretry;
+	__le32 framedup;
+	__le32 rtssuccess;
+	__le32 rtsfailure;
+	__le32 ackfailure;
+	__le32 rxfrag;
+	__le32 mcastrxframe;
+	__le32 fcserror;
+	__le32 txframe;
+	__le32 wepundecryptable;
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_control {
+	struct cmd_header hdr;
+	__le16 action;
+	u16 reserved;
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_multicast_adr {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 nr_of_adrs;
+	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_authenticate {
+	struct cmd_header hdr;
+
+	u8 bssid[ETH_ALEN];
+	u8 authtype;
+	u8 reserved[10];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_deauthenticate {
+	struct cmd_header hdr;
+
+	u8 macaddr[ETH_ALEN];
+	__le16 reasoncode;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_associate {
+	struct cmd_header hdr;
+
+	u8 bssid[6];
+	__le16 capability;
+	__le16 listeninterval;
+	__le16 bcnperiod;
+	u8 dtimperiod;
+	u8 iebuf[512];    /* Enough for required and most optional IEs */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_associate_response {
+	struct cmd_header hdr;
+
+	__le16 capability;
+	__le16 statuscode;
+	__le16 aid;
+	u8 iebuf[512];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_set_wep {
+	struct cmd_header hdr;
+
+	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
+	__le16 action;
+
+	/* key Index selected for Tx */
+	__le16 keyindex;
+
+	/* 40, 128bit or TXWEP */
+	uint8_t keytype[4];
+	uint8_t keymaterial[4][16];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_snmp_mib {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 oid;
+	__le16 bufsize;
+	u8 value[128];
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_reg_access {
+	__le16 action;
+	__le16 offset;
+	__le32 value;
+} __attribute__ ((packed));
+
+struct cmd_ds_bbp_reg_access {
+	__le16 action;
+	__le16 offset;
+	u8 value;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_ds_rf_reg_access {
+	__le16 action;
+	__le16 offset;
+	u8 value;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_radio_control {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 control;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_beacon_control {
+	__le16 action;
+	__le16 beacon_enable;
+	__le16 beacon_period;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_sleep_params {
+	struct cmd_header hdr;
+
+	/* ACT_GET/ACT_SET */
+	__le16 action;
+
+	/* Sleep clock error in ppm */
+	__le16 error;
+
+	/* Wakeup offset in usec */
+	__le16 offset;
+
+	/* Clock stabilization time in usec */
+	__le16 stabletime;
+
+	/* control periodic calibration */
+	uint8_t calcontrol;
+
+	/* control the use of external sleep clock */
+	uint8_t externalsleepclk;
+
+	/* reserved field, should be set to zero */
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rf_channel {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 channel;
+	__le16 rftype;      /* unused */
+	__le16 reserved;    /* unused */
+	u8 channellist[32]; /* unused */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rssi {
+	/* weighting factor */
+	__le16 N;
+
+	__le16 reserved_0;
+	__le16 reserved_1;
+	__le16 reserved_2;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rssi_rsp {
+	__le16 SNR;
+	__le16 noisefloor;
+	__le16 avgSNR;
+	__le16 avgnoisefloor;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_mac_address {
+	struct cmd_header hdr;
+
+	__le16 action;
+	u8 macadd[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rf_tx_power {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 curlevel;
+	s8 maxlevel;
+	s8 minlevel;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_monitor_mode {
+	__le16 action;
+	__le16 mode;
+} __attribute__ ((packed));
+
+struct cmd_ds_set_boot2_ver {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 version;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_fw_wake_method {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 method;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ps_mode {
+	__le16 action;
+	__le16 nullpktinterval;
+	__le16 multipledtim;
+	__le16 reserved;
+	__le16 locallisteninterval;
+} __attribute__ ((packed));
+
+struct cmd_confirm_sleep {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 nullpktinterval;
+	__le16 multipledtim;
+	__le16 reserved;
+	__le16 locallisteninterval;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_data_rate {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 reserved;
+	u8 rates[MAX_RATES];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rate_adapt_rateset {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 enablehwauto;
+	__le16 bitmap;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_start {
+	struct cmd_header hdr;
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 bsstype;
+	__le16 beaconperiod;
+	u8 dtimperiod;   /* Reserved on v9 and later */
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved1[4];
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved2[4];
+	__le16 probedelay;  /* Reserved on v9 and later */
+	__le16 capability;
+	u8 rates[MAX_RATES];
+	u8 tlv_memory_size_pad[100];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_result {
+	struct cmd_header hdr;
+
+	u8 pad[3];
+	u8 bssid[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct adhoc_bssdesc {
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 type;
+	__le16 beaconperiod;
+	u8 dtimperiod;
+	__le64 timestamp;
+	__le64 localtime;
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved1[4];
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved2[4];
+	__le16 capability;
+	u8 rates[MAX_RATES];
+
+	/* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+	 * Adhoc join command and will cause a binary layout mismatch with
+	 * the firmware
+	 */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_join {
+	struct cmd_header hdr;
+
+	struct adhoc_bssdesc bss;
+	__le16 failtimeout;   /* Reserved on v9 and later */
+	__le16 probedelay;    /* Reserved on v9 and later */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_stop {
+	struct cmd_header hdr;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_enable_rsn {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 enable;
+} __attribute__ ((packed));
+
+struct MrvlIEtype_keyParamSet {
+	/* type ID */
+	__le16 type;
+
+	/* length of Payload */
+	__le16 length;
+
+	/* type of key: WEP=0, TKIP=1, AES=2 */
+	__le16 keytypeid;
+
+	/* key control Info specific to a keytypeid */
+	__le16 keyinfo;
+
+	/* length of key */
+	__le16 keylen;
+
+	/* key material of size keylen */
+	u8 key[32];
+} __attribute__ ((packed));
+
+#define MAX_WOL_RULES 		16
+
+struct host_wol_rule {
+	uint8_t rule_no;
+	uint8_t rule_ops;
+	__le16 sig_offset;
+	__le16 sig_length;
+	__le16 reserve;
+	__be32 sig_mask;
+	__be32 signature;
+} __attribute__ ((packed));
+
+struct wol_config {
+	uint8_t action;
+	uint8_t pattern;
+	uint8_t no_rules_in_cmd;
+	uint8_t result;
+	struct host_wol_rule rule[MAX_WOL_RULES];
+} __attribute__ ((packed));
+
+struct cmd_ds_host_sleep {
+	struct cmd_header hdr;
+	__le32 criteria;
+	uint8_t gpio;
+	uint16_t gap;
+	struct wol_config wol_conf;
+} __attribute__ ((packed));
+
+
+
+struct cmd_ds_802_11_key_material {
+	struct cmd_header hdr;
+
+	__le16 action;
+	struct MrvlIEtype_keyParamSet keyParamSet[2];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_eeprom_access {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 offset;
+	__le16 len;
+	/* firmware says it returns a maximum of 20 bytes */
+#define LBS_EEPROM_READ_LEN 20
+	u8 value[LBS_EEPROM_READ_LEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_tpc_cfg {
+	struct cmd_header hdr;
+
+	__le16 action;
+	uint8_t enable;
+	int8_t P0;
+	int8_t P1;
+	int8_t P2;
+	uint8_t usesnr;
+} __attribute__ ((packed));
+
+
+struct cmd_ds_802_11_pa_cfg {
+	struct cmd_header hdr;
+
+	__le16 action;
+	uint8_t enable;
+	int8_t P0;
+	int8_t P1;
+	int8_t P2;
+} __attribute__ ((packed));
+
+
+struct cmd_ds_802_11_led_ctrl {
+	__le16 action;
+	__le16 numled;
+	u8 data[256];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_afc {
+	__le16 afc_auto;
+	union {
+		struct {
+			__le16 threshold;
+			__le16 period;
+		};
+		struct {
+			__le16 timing_offset; /* signed */
+			__le16 carrier_offset; /* signed */
+		};
+	};
+} __attribute__ ((packed));
+
+struct cmd_tx_rate_query {
+	__le16 txrate;
+} __attribute__ ((packed));
+
+struct cmd_ds_get_tsf {
+	__le64 tsfvalue;
+} __attribute__ ((packed));
+
+struct cmd_ds_bt_access {
+	__le16 action;
+	__le32 id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_fwt_access {
+	__le16 action;
+	__le32 id;
+	u8 valid;
+	u8 da[ETH_ALEN];
+	u8 dir;
+	u8 ra[ETH_ALEN];
+	__le32 ssn;
+	__le32 dsn;
+	__le32 metric;
+	u8 rate;
+	u8 hopcount;
+	u8 ttl;
+	__le32 expiration;
+	u8 sleepmode;
+	__le32 snr;
+	__le32 references;
+	u8 prec[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_mesh_config {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 channel;
+	__le16 type;
+	__le16 length;
+	u8 data[128];	/* last position reserved */
+} __attribute__ ((packed));
+
+struct cmd_ds_mesh_access {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le32 data[32];	/* last position reserved */
+} __attribute__ ((packed));
+
+/* Number of stats counters returned by the firmware */
+#define MESH_STATS_NUM 8
+
+struct cmd_ds_command {
+	/* command header */
+	__le16 command;
+	__le16 size;
+	__le16 seqnum;
+	__le16 result;
+
+	/* command Body */
+	union {
+		struct cmd_ds_802_11_ps_mode psmode;
+		struct cmd_ds_802_11_monitor_mode monitor;
+		struct cmd_ds_802_11_rssi rssi;
+		struct cmd_ds_802_11_rssi_rsp rssirsp;
+		struct cmd_ds_mac_reg_access macreg;
+		struct cmd_ds_bbp_reg_access bbpreg;
+		struct cmd_ds_rf_reg_access rfreg;
+
+		struct cmd_ds_802_11_tpc_cfg tpccfg;
+		struct cmd_ds_802_11_afc afc;
+		struct cmd_ds_802_11_led_ctrl ledgpio;
+
+		struct cmd_ds_bt_access bt;
+		struct cmd_ds_fwt_access fwt;
+		struct cmd_ds_802_11_beacon_control bcn_ctrl;
+	} params;
+} __attribute__ ((packed));
+
 #endif
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
deleted file mode 100644
index c8a1998..0000000
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ /dev/null
@@ -1,800 +0,0 @@
-/*
- * This file contains the function prototypes, data structure
- * and defines for all the host/station commands
- */
-#ifndef _LBS_HOSTCMD_H
-#define _LBS_HOSTCMD_H
-
-#include <linux/wireless.h>
-#include "11d.h"
-#include "types.h"
-
-/* 802.11-related definitions */
-
-/* TxPD descriptor */
-struct txpd {
-	/* union to cope up with later FW revisions */
-	union {
-		/* Current Tx packet status */
-		__le32 tx_status;
-		struct {
-			/* BSS type: client, AP, etc. */
-			u8 bss_type;
-			/* BSS number */
-			u8 bss_num;
-			/* Reserved */
-			__le16 reserved;
-		} bss;
-	} u;
-	/* Tx control */
-	__le32 tx_control;
-	__le32 tx_packet_location;
-	/* Tx packet length */
-	__le16 tx_packet_length;
-	/* First 2 byte of destination MAC address */
-	u8 tx_dest_addr_high[2];
-	/* Last 4 byte of destination MAC address */
-	u8 tx_dest_addr_low[4];
-	/* Pkt Priority */
-	u8 priority;
-	/* Pkt Trasnit Power control */
-	u8 powermgmt;
-	/* Amount of time the packet has been queued in the driver (units = 2ms) */
-	u8 pktdelay_2ms;
-	/* reserved */
-	u8 reserved1;
-} __attribute__ ((packed));
-
-/* RxPD Descriptor */
-struct rxpd {
-	/* union to cope up with later FW revisions */
-	union {
-		/* Current Rx packet status */
-		__le16 status;
-		struct {
-			/* BSS type: client, AP, etc. */
-			u8 bss_type;
-			/* BSS number */
-			u8 bss_num;
-		} __attribute__ ((packed)) bss;
-	} __attribute__ ((packed)) u;
-
-	/* SNR */
-	u8 snr;
-
-	/* Tx control */
-	u8 rx_control;
-
-	/* Pkt length */
-	__le16 pkt_len;
-
-	/* Noise Floor */
-	u8 nf;
-
-	/* Rx Packet Rate */
-	u8 rx_rate;
-
-	/* Pkt addr */
-	__le32 pkt_ptr;
-
-	/* Next Rx RxPD addr */
-	__le32 next_rxpd_ptr;
-
-	/* Pkt Priority */
-	u8 priority;
-	u8 reserved[3];
-} __attribute__ ((packed));
-
-struct cmd_header {
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-} __attribute__ ((packed));
-
-struct cmd_ctrl_node {
-	struct list_head list;
-	int result;
-	/* command response */
-	int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *);
-	unsigned long callback_arg;
-	/* command data */
-	struct cmd_header *cmdbuf;
-	/* wait queue */
-	u16 cmdwaitqwoken;
-	wait_queue_head_t cmdwait_q;
-};
-
-/* Generic structure to hold all key types. */
-struct enc_key {
-	u16 len;
-	u16 flags;  /* KEY_INFO_* from defs.h */
-	u16 type; /* KEY_TYPE_* from defs.h */
-	u8 key[32];
-};
-
-/* lbs_offset_value */
-struct lbs_offset_value {
-	u32 offset;
-	u32 value;
-} __attribute__ ((packed));
-
-/* Define general data structure */
-/* cmd_DS_GEN */
-struct cmd_ds_gen {
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-	void *cmdresp[0];
-} __attribute__ ((packed));
-
-#define S_DS_GEN sizeof(struct cmd_ds_gen)
-
-
-/*
- * Define data structure for CMD_GET_HW_SPEC
- * This structure defines the response for the GET_HW_SPEC command
- */
-struct cmd_ds_get_hw_spec {
-	struct cmd_header hdr;
-
-	/* HW Interface version number */
-	__le16 hwifversion;
-	/* HW version number */
-	__le16 version;
-	/* Max number of TxPD FW can handle */
-	__le16 nr_txpd;
-	/* Max no of Multicast address */
-	__le16 nr_mcast_adr;
-	/* MAC address */
-	u8 permanentaddr[6];
-
-	/* region Code */
-	__le16 regioncode;
-
-	/* Number of antenna used */
-	__le16 nr_antenna;
-
-	/* FW release number, example 0x01030304 = 2.3.4p1 */
-	__le32 fwrelease;
-
-	/* Base Address of TxPD queue */
-	__le32 wcb_base;
-	/* Read Pointer of RxPd queue */
-	__le32 rxpd_rdptr;
-
-	/* Write Pointer of RxPd queue */
-	__le32 rxpd_wrptr;
-
-	/*FW/HW capability */
-	__le32 fwcapinfo;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_subscribe_event {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 events;
-
-	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
-	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
-	 * 40 bytes. However, future firmware might add additional TLVs, so I
-	 * bump this up a bit.
-	 */
-	uint8_t tlv[128];
-} __attribute__ ((packed));
-
-/*
- * This scan handle Country Information IE(802.11d compliant)
- * Define data structure for CMD_802_11_SCAN
- */
-struct cmd_ds_802_11_scan {
-	struct cmd_header hdr;
-
-	uint8_t bsstype;
-	uint8_t bssid[ETH_ALEN];
-	uint8_t tlvbuffer[0];
-#if 0
-	mrvlietypes_ssidparamset_t ssidParamSet;
-	mrvlietypes_chanlistparamset_t ChanListParamSet;
-	mrvlietypes_ratesparamset_t OpRateSet;
-#endif
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_scan_rsp {
-	struct cmd_header hdr;
-
-	__le16 bssdescriptsize;
-	uint8_t nr_sets;
-	uint8_t bssdesc_and_tlvbuffer[0];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_get_log {
-	struct cmd_header hdr;
-
-	__le32 mcasttxframe;
-	__le32 failed;
-	__le32 retry;
-	__le32 multiretry;
-	__le32 framedup;
-	__le32 rtssuccess;
-	__le32 rtsfailure;
-	__le32 ackfailure;
-	__le32 rxfrag;
-	__le32 mcastrxframe;
-	__le32 fcserror;
-	__le32 txframe;
-	__le32 wepundecryptable;
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_control {
-	struct cmd_header hdr;
-	__le16 action;
-	u16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_multicast_adr {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 nr_of_adrs;
-	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-} __attribute__ ((packed));
-
-struct cmd_ds_gspi_bus_config {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 bus_delay_mode;
-	__le16 host_time_delay_to_read_port;
-	__le16 host_time_delay_to_read_register;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_authenticate {
-	struct cmd_header hdr;
-
-	u8 bssid[ETH_ALEN];
-	u8 authtype;
-	u8 reserved[10];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_deauthenticate {
-	struct cmd_header hdr;
-
-	u8 macaddr[ETH_ALEN];
-	__le16 reasoncode;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_associate {
-	struct cmd_header hdr;
-
-	u8 bssid[6];
-	__le16 capability;
-	__le16 listeninterval;
-	__le16 bcnperiod;
-	u8 dtimperiod;
-	u8 iebuf[512];    /* Enough for required and most optional IEs */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_associate_response {
-	struct cmd_header hdr;
-
-	__le16 capability;
-	__le16 statuscode;
-	__le16 aid;
-	u8 iebuf[512];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_set_wep {
-	struct cmd_header hdr;
-
-	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
-	__le16 action;
-
-	/* key Index selected for Tx */
-	__le16 keyindex;
-
-	/* 40, 128bit or TXWEP */
-	uint8_t keytype[4];
-	uint8_t keymaterial[4][16];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_3_get_stat {
-	__le32 xmitok;
-	__le32 rcvok;
-	__le32 xmiterror;
-	__le32 rcverror;
-	__le32 rcvnobuffer;
-	__le32 rcvcrcerror;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_get_stat {
-	__le32 txfragmentcnt;
-	__le32 mcasttxframecnt;
-	__le32 failedcnt;
-	__le32 retrycnt;
-	__le32 Multipleretrycnt;
-	__le32 rtssuccesscnt;
-	__le32 rtsfailurecnt;
-	__le32 ackfailurecnt;
-	__le32 frameduplicatecnt;
-	__le32 rxfragmentcnt;
-	__le32 mcastrxframecnt;
-	__le32 fcserrorcnt;
-	__le32 bcasttxframecnt;
-	__le32 bcastrxframecnt;
-	__le32 txbeacon;
-	__le32 rxbeacon;
-	__le32 wepundecryptable;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_snmp_mib {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 oid;
-	__le16 bufsize;
-	u8 value[128];
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_reg_map {
-	__le16 buffersize;
-	u8 regmap[128];
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_bbp_reg_map {
-	__le16 buffersize;
-	u8 regmap[128];
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_rf_reg_map {
-	__le16 buffersize;
-	u8 regmap[64];
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_reg_access {
-	__le16 action;
-	__le16 offset;
-	__le32 value;
-} __attribute__ ((packed));
-
-struct cmd_ds_bbp_reg_access {
-	__le16 action;
-	__le16 offset;
-	u8 value;
-	u8 reserved[3];
-} __attribute__ ((packed));
-
-struct cmd_ds_rf_reg_access {
-	__le16 action;
-	__le16 offset;
-	u8 value;
-	u8 reserved[3];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_radio_control {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 control;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_beacon_control {
-	__le16 action;
-	__le16 beacon_enable;
-	__le16 beacon_period;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_sleep_params {
-	struct cmd_header hdr;
-
-	/* ACT_GET/ACT_SET */
-	__le16 action;
-
-	/* Sleep clock error in ppm */
-	__le16 error;
-
-	/* Wakeup offset in usec */
-	__le16 offset;
-
-	/* Clock stabilization time in usec */
-	__le16 stabletime;
-
-	/* control periodic calibration */
-	uint8_t calcontrol;
-
-	/* control the use of external sleep clock */
-	uint8_t externalsleepclk;
-
-	/* reserved field, should be set to zero */
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_inactivity_timeout {
-	struct cmd_header hdr;
-
-	/* ACT_GET/ACT_SET */
-	__le16 action;
-
-	/* Inactivity timeout in msec */
-	__le16 timeout;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rf_channel {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 channel;
-	__le16 rftype;      /* unused */
-	__le16 reserved;    /* unused */
-	u8 channellist[32]; /* unused */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rssi {
-	/* weighting factor */
-	__le16 N;
-
-	__le16 reserved_0;
-	__le16 reserved_1;
-	__le16 reserved_2;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rssi_rsp {
-	__le16 SNR;
-	__le16 noisefloor;
-	__le16 avgSNR;
-	__le16 avgnoisefloor;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_mac_address {
-	struct cmd_header hdr;
-
-	__le16 action;
-	u8 macadd[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rf_tx_power {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 curlevel;
-	s8 maxlevel;
-	s8 minlevel;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rf_antenna {
-	__le16 action;
-
-	/* Number of antennas or 0xffff(diversity) */
-	__le16 antennamode;
-
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_monitor_mode {
-	__le16 action;
-	__le16 mode;
-} __attribute__ ((packed));
-
-struct cmd_ds_set_boot2_ver {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 version;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_fw_wake_method {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 method;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_sleep_period {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 period;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ps_mode {
-	__le16 action;
-	__le16 nullpktinterval;
-	__le16 multipledtim;
-	__le16 reserved;
-	__le16 locallisteninterval;
-} __attribute__ ((packed));
-
-struct cmd_confirm_sleep {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 nullpktinterval;
-	__le16 multipledtim;
-	__le16 reserved;
-	__le16 locallisteninterval;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_data_rate {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 reserved;
-	u8 rates[MAX_RATES];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rate_adapt_rateset {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 enablehwauto;
-	__le16 bitmap;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_start {
-	struct cmd_header hdr;
-
-	u8 ssid[IW_ESSID_MAX_SIZE];
-	u8 bsstype;
-	__le16 beaconperiod;
-	u8 dtimperiod;   /* Reserved on v9 and later */
-	struct ieee_ie_ibss_param_set ibss;
-	u8 reserved1[4];
-	struct ieee_ie_ds_param_set ds;
-	u8 reserved2[4];
-	__le16 probedelay;  /* Reserved on v9 and later */
-	__le16 capability;
-	u8 rates[MAX_RATES];
-	u8 tlv_memory_size_pad[100];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_result {
-	struct cmd_header hdr;
-
-	u8 pad[3];
-	u8 bssid[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct adhoc_bssdesc {
-	u8 bssid[ETH_ALEN];
-	u8 ssid[IW_ESSID_MAX_SIZE];
-	u8 type;
-	__le16 beaconperiod;
-	u8 dtimperiod;
-	__le64 timestamp;
-	__le64 localtime;
-	struct ieee_ie_ds_param_set ds;
-	u8 reserved1[4];
-	struct ieee_ie_ibss_param_set ibss;
-	u8 reserved2[4];
-	__le16 capability;
-	u8 rates[MAX_RATES];
-
-	/* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
-	 * Adhoc join command and will cause a binary layout mismatch with
-	 * the firmware
-	 */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_join {
-	struct cmd_header hdr;
-
-	struct adhoc_bssdesc bss;
-	__le16 failtimeout;   /* Reserved on v9 and later */
-	__le16 probedelay;    /* Reserved on v9 and later */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_stop {
-	struct cmd_header hdr;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_enable_rsn {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 enable;
-} __attribute__ ((packed));
-
-struct MrvlIEtype_keyParamSet {
-	/* type ID */
-	__le16 type;
-
-	/* length of Payload */
-	__le16 length;
-
-	/* type of key: WEP=0, TKIP=1, AES=2 */
-	__le16 keytypeid;
-
-	/* key control Info specific to a keytypeid */
-	__le16 keyinfo;
-
-	/* length of key */
-	__le16 keylen;
-
-	/* key material of size keylen */
-	u8 key[32];
-} __attribute__ ((packed));
-
-#define MAX_WOL_RULES 		16
-
-struct host_wol_rule {
-	uint8_t rule_no;
-	uint8_t rule_ops;
-	__le16 sig_offset;
-	__le16 sig_length;
-	__le16 reserve;
-	__be32 sig_mask;
-	__be32 signature;
-} __attribute__ ((packed));
-
-struct wol_config {
-	uint8_t action;
-	uint8_t pattern;
-	uint8_t no_rules_in_cmd;
-	uint8_t result;
-	struct host_wol_rule rule[MAX_WOL_RULES];
-} __attribute__ ((packed));
-
-struct cmd_ds_host_sleep {
-	struct cmd_header hdr;
-	__le32 criteria;
-	uint8_t gpio;
-	uint16_t gap;
-	struct wol_config wol_conf;
-} __attribute__ ((packed));
-
-
-
-struct cmd_ds_802_11_key_material {
-	struct cmd_header hdr;
-
-	__le16 action;
-	struct MrvlIEtype_keyParamSet keyParamSet[2];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_eeprom_access {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 offset;
-	__le16 len;
-	/* firmware says it returns a maximum of 20 bytes */
-#define LBS_EEPROM_READ_LEN 20
-	u8 value[LBS_EEPROM_READ_LEN];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_tpc_cfg {
-	struct cmd_header hdr;
-
-	__le16 action;
-	uint8_t enable;
-	int8_t P0;
-	int8_t P1;
-	int8_t P2;
-	uint8_t usesnr;
-} __attribute__ ((packed));
-
-
-struct cmd_ds_802_11_pa_cfg {
-	struct cmd_header hdr;
-
-	__le16 action;
-	uint8_t enable;
-	int8_t P0;
-	int8_t P1;
-	int8_t P2;
-} __attribute__ ((packed));
-
-
-struct cmd_ds_802_11_led_ctrl {
-	__le16 action;
-	__le16 numled;
-	u8 data[256];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_afc {
-	__le16 afc_auto;
-	union {
-		struct {
-			__le16 threshold;
-			__le16 period;
-		};
-		struct {
-			__le16 timing_offset; /* signed */
-			__le16 carrier_offset; /* signed */
-		};
-	};
-} __attribute__ ((packed));
-
-struct cmd_tx_rate_query {
-	__le16 txrate;
-} __attribute__ ((packed));
-
-struct cmd_ds_get_tsf {
-	__le64 tsfvalue;
-} __attribute__ ((packed));
-
-struct cmd_ds_bt_access {
-	__le16 action;
-	__le32 id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct cmd_ds_fwt_access {
-	__le16 action;
-	__le32 id;
-	u8 valid;
-	u8 da[ETH_ALEN];
-	u8 dir;
-	u8 ra[ETH_ALEN];
-	__le32 ssn;
-	__le32 dsn;
-	__le32 metric;
-	u8 rate;
-	u8 hopcount;
-	u8 ttl;
-	__le32 expiration;
-	u8 sleepmode;
-	__le32 snr;
-	__le32 references;
-	u8 prec[ETH_ALEN];
-} __attribute__ ((packed));
-
-
-struct cmd_ds_mesh_config {
-	struct cmd_header hdr;
-
-        __le16 action;
-        __le16 channel;
-        __le16 type;
-        __le16 length;
-        u8 data[128];   /* last position reserved */
-} __attribute__ ((packed));
-
-
-struct cmd_ds_mesh_access {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le32 data[32];	/* last position reserved */
-} __attribute__ ((packed));
-
-/* Number of stats counters returned by the firmware */
-#define MESH_STATS_NUM 8
-
-struct cmd_ds_command {
-	/* command header */
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-
-	/* command Body */
-	union {
-		struct cmd_ds_802_11_ps_mode psmode;
-		struct cmd_ds_802_11_get_stat gstat;
-		struct cmd_ds_802_3_get_stat gstat_8023;
-		struct cmd_ds_802_11_rf_antenna rant;
-		struct cmd_ds_802_11_monitor_mode monitor;
-		struct cmd_ds_802_11_rssi rssi;
-		struct cmd_ds_802_11_rssi_rsp rssirsp;
-		struct cmd_ds_mac_reg_access macreg;
-		struct cmd_ds_bbp_reg_access bbpreg;
-		struct cmd_ds_rf_reg_access rfreg;
-
-		struct cmd_ds_802_11d_domain_info domaininfo;
-		struct cmd_ds_802_11d_domain_info domaininforesp;
-
-		struct cmd_ds_802_11_tpc_cfg tpccfg;
-		struct cmd_ds_802_11_afc afc;
-		struct cmd_ds_802_11_led_ctrl ledgpio;
-
-		struct cmd_tx_rate_query txrate;
-		struct cmd_ds_bt_access bt;
-		struct cmd_ds_fwt_access fwt;
-		struct cmd_ds_get_tsf gettsf;
-		struct cmd_ds_802_11_beacon_control bcn_ctrl;
-	} params;
-} __attribute__ ((packed));
-
-#endif
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 6238176..1f6cb58 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -48,6 +48,7 @@
 MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
 MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("libertas_cs_helper.fw");
 
 
 
@@ -590,7 +591,7 @@
 
 	/* TODO: make firmware file configurable */
 	ret = request_firmware(&fw, "libertas_cs_helper.fw",
-		&handle_to_dev(card->p_dev));
+		&card->p_dev->dev);
 	if (ret) {
 		lbs_pr_err("can't load helper firmware\n");
 		ret = -ENODEV;
@@ -663,7 +664,7 @@
 
 	/* TODO: make firmware file configurable */
 	ret = request_firmware(&fw, "libertas_cs.fw",
-		&handle_to_dev(card->p_dev));
+		&card->p_dev->dev);
 	if (ret) {
 		lbs_pr_err("can't load firmware\n");
 		ret = -ENODEV;
@@ -793,18 +794,37 @@
  * configure the card at this point -- we wait until we receive a card
  * insertion event.
  */
+
+static int if_cs_ioprobe(struct pcmcia_device *p_dev,
+			 cistpl_cftable_entry_t *cfg,
+			 cistpl_cftable_entry_t *dflt,
+			 unsigned int vcc,
+			 void *priv_data)
+{
+	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+	p_dev->io.BasePort1 = cfg->io.win[0].base;
+	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	if (cfg->io.nwin != 1) {
+		lbs_pr_err("wrong CIS (check number of IO windows)\n");
+		return -ENODEV;
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static int if_cs_probe(struct pcmcia_device *p_dev)
 {
 	int ret = -ENOMEM;
 	unsigned int prod_id;
 	struct lbs_private *priv;
 	struct if_cs_card *card;
-	/* CIS parsing */
-	tuple_t tuple;
-	cisparse_t parse;
-	cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
-	cistpl_io_t *io = &cfg->io;
-	u_char buf[64];
 
 	lbs_deb_enter(LBS_DEB_CS);
 
@@ -818,48 +838,15 @@
 
 	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	p_dev->irq.Handler = NULL;
-	p_dev->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_LEVEL_ID;
 
 	p_dev->conf.Attributes = 0;
 	p_dev->conf.IntType = INT_MEMORY_AND_IO;
 
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
-	    (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
-	    (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
-	{
-		lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
+	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
+		lbs_pr_err("error in pcmcia_loop_config\n");
 		goto out1;
 	}
 
-	p_dev->conf.ConfigIndex = cfg->index;
-
-	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1) {
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
-	}
-
-	/* IO window settings */
-	if (cfg->io.nwin != 1) {
-		lbs_pr_err("wrong CIS (check number of IO windows)\n");
-		ret = -ENODEV;
-		goto out1;
-	}
-	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	p_dev->io.BasePort1 = io->win[0].base;
-	p_dev->io.NumPorts1 = io->win[0].len;
-
-	/* This reserves IO space but doesn't actually enable it */
-	ret = pcmcia_request_io(p_dev, &p_dev->io);
-	if (ret) {
-		lbs_pr_err("error in pcmcia_request_io\n");
-		goto out1;
-	}
 
 	/*
 	 * Allocate an interrupt line.  Note that this does not assign
@@ -946,6 +933,9 @@
 	card->priv = priv;
 	priv->card = card;
 	priv->hw_host_to_card = if_cs_host_to_card;
+	priv->enter_deep_sleep = NULL;
+	priv->exit_deep_sleep = NULL;
+	priv->reset_deep_sleep_wakeup = NULL;
 	priv->fw_ready = 1;
 
 	/* Now actually get the IRQ */
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 485a8d40..09fcfad 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -99,6 +99,12 @@
 		.firmware = "sd8688.bin",
 	},
 };
+MODULE_FIRMWARE("sd8385_helper.bin");
+MODULE_FIRMWARE("sd8385.bin");
+MODULE_FIRMWARE("sd8686_helper.bin");
+MODULE_FIRMWARE("sd8686.bin");
+MODULE_FIRMWARE("sd8688_helper.bin");
+MODULE_FIRMWARE("sd8688.bin");
 
 struct if_sdio_packet {
 	struct if_sdio_packet	*next;
@@ -831,6 +837,58 @@
 	return ret;
 }
 
+static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
+{
+	int ret = -1;
+	struct cmd_header cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	lbs_deb_sdio("send DEEP_SLEEP command\n");
+	ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
+			lbs_cmd_copyback, (unsigned long) &cmd);
+	if (ret)
+		lbs_pr_err("DEEP_SLEEP cmd failed\n");
+
+	mdelay(200);
+	return ret;
+}
+
+static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
+{
+	struct if_sdio_card *card = priv->card;
+	int ret = -1;
+
+	lbs_deb_enter(LBS_DEB_SDIO);
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
+	if (ret)
+		lbs_pr_err("sdio_writeb failed!\n");
+
+	sdio_release_host(card->func);
+	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+	return ret;
+}
+
+static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
+{
+	struct if_sdio_card *card = priv->card;
+	int ret = -1;
+
+	lbs_deb_enter(LBS_DEB_SDIO);
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
+	if (ret)
+		lbs_pr_err("sdio_writeb failed!\n");
+
+	sdio_release_host(card->func);
+	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+	return ret;
+
+}
+
 /*******************************************************************/
 /* SDIO callbacks                                                  */
 /*******************************************************************/
@@ -859,6 +917,7 @@
 	 * Ignore the define name, this really means the card has
 	 * successfully received the command.
 	 */
+	card->priv->is_activity_detected = 1;
 	if (cause & IF_SDIO_H_INT_DNLD)
 		lbs_host_to_card_done(card->priv);
 
@@ -998,6 +1057,9 @@
 
 	priv->card = card;
 	priv->hw_host_to_card = if_sdio_host_to_card;
+	priv->enter_deep_sleep = if_sdio_enter_deep_sleep;
+	priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
+	priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
 
 	priv->fw_ready = 1;
 
diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
index 60c9b2f..12179c1 100644
--- a/drivers/net/wireless/libertas/if_sdio.h
+++ b/drivers/net/wireless/libertas/if_sdio.h
@@ -51,5 +51,6 @@
 #define IF_SDIO_EVENT           0x80fc
 
 #define IF_SDIO_BLOCK_SIZE	256
-
+#define CONFIGURATION_REG               0x03
+#define HOST_POWER_UP                   (0x1U << 1)
 #endif
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 5b3672c..bf4bfba 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -32,12 +32,6 @@
 #include "dev.h"
 #include "if_spi.h"
 
-struct if_spi_packet {
-	struct list_head		list;
-	u16				blen;
-	u8				buffer[0] __attribute__((aligned(4)));
-};
-
 struct if_spi_card {
 	struct spi_device		*spi;
 	struct lbs_private		*priv;
@@ -66,33 +60,10 @@
 	struct semaphore		spi_thread_terminated;
 
 	u8				cmd_buffer[IF_SPI_CMD_BUF_SIZE];
-
-	/* A buffer of incoming packets from libertas core.
-	 * Since we can't sleep in hw_host_to_card, we have to buffer
-	 * them. */
-	struct list_head		cmd_packet_list;
-	struct list_head		data_packet_list;
-
-	/* Protects cmd_packet_list and data_packet_list */
-	spinlock_t			buffer_lock;
 };
 
 static void free_if_spi_card(struct if_spi_card *card)
 {
-	struct list_head *cursor, *next;
-	struct if_spi_packet *packet;
-
-	BUG_ON(card->run_thread);
-	list_for_each_safe(cursor, next, &card->cmd_packet_list) {
-		packet = container_of(cursor, struct if_spi_packet, list);
-		list_del(&packet->list);
-		kfree(packet);
-	}
-	list_for_each_safe(cursor, next, &card->data_packet_list) {
-		packet = container_of(cursor, struct if_spi_packet, list);
-		list_del(&packet->list);
-		kfree(packet);
-	}
 	spi_set_drvdata(card->spi, NULL);
 	kfree(card);
 }
@@ -774,40 +745,6 @@
 	return err;
 }
 
-/* Move data or a command from the host to the card. */
-static void if_spi_h2c(struct if_spi_card *card,
-			struct if_spi_packet *packet, int type)
-{
-	int err = 0;
-	u16 int_type, port_reg;
-
-	switch (type) {
-	case MVMS_DAT:
-		int_type = IF_SPI_CIC_TX_DOWNLOAD_OVER;
-		port_reg = IF_SPI_DATA_RDWRPORT_REG;
-		break;
-	case MVMS_CMD:
-		int_type = IF_SPI_CIC_CMD_DOWNLOAD_OVER;
-		port_reg = IF_SPI_CMD_RDWRPORT_REG;
-		break;
-	default:
-		lbs_pr_err("can't transfer buffer of type %d\n", type);
-		err = -EINVAL;
-		goto out;
-	}
-
-	/* Write the data to the card */
-	err = spu_write(card, port_reg, packet->buffer, packet->blen);
-	if (err)
-		goto out;
-
-out:
-	kfree(packet);
-
-	if (err)
-		lbs_pr_err("%s: error %d\n", __func__, err);
-}
-
 /* Inform the host about a card event */
 static void if_spi_e2h(struct if_spi_card *card)
 {
@@ -837,8 +774,6 @@
 	int err;
 	struct if_spi_card *card = data;
 	u16 hiStatus;
-	unsigned long flags;
-	struct if_spi_packet *packet;
 
 	while (1) {
 		/* Wait to be woken up by one of two things.  First, our ISR
@@ -877,43 +812,9 @@
 		if (hiStatus & IF_SPI_HIST_CMD_DOWNLOAD_RDY ||
 		   (card->priv->psstate != PS_STATE_FULL_POWER &&
 		    (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY))) {
-			/* This means two things. First of all,
-			 * if there was a previous command sent, the card has
-			 * successfully received it.
-			 * Secondly, it is now ready to download another
-			 * command.
-			 */
 			lbs_host_to_card_done(card->priv);
-
-			/* Do we have any command packets from the host to
-			 * send? */
-			packet = NULL;
-			spin_lock_irqsave(&card->buffer_lock, flags);
-			if (!list_empty(&card->cmd_packet_list)) {
-				packet = (struct if_spi_packet *)(card->
-						cmd_packet_list.next);
-				list_del(&packet->list);
-			}
-			spin_unlock_irqrestore(&card->buffer_lock, flags);
-
-			if (packet)
-				if_spi_h2c(card, packet, MVMS_CMD);
 		}
-		if (hiStatus & IF_SPI_HIST_TX_DOWNLOAD_RDY) {
-			/* Do we have any data packets from the host to
-			 * send? */
-			packet = NULL;
-			spin_lock_irqsave(&card->buffer_lock, flags);
-			if (!list_empty(&card->data_packet_list)) {
-				packet = (struct if_spi_packet *)(card->
-						data_packet_list.next);
-				list_del(&packet->list);
-			}
-			spin_unlock_irqrestore(&card->buffer_lock, flags);
 
-			if (packet)
-				if_spi_h2c(card, packet, MVMS_DAT);
-		}
 		if (hiStatus & IF_SPI_HIST_CARD_EVENT)
 			if_spi_e2h(card);
 
@@ -942,40 +843,18 @@
 				u8 type, u8 *buf, u16 nb)
 {
 	int err = 0;
-	unsigned long flags;
 	struct if_spi_card *card = priv->card;
-	struct if_spi_packet *packet;
-	u16 blen;
 
 	lbs_deb_enter_args(LBS_DEB_SPI, "type %d, bytes %d", type, nb);
 
-	if (nb == 0) {
-		lbs_pr_err("%s: invalid size requested: %d\n", __func__, nb);
-		err = -EINVAL;
-		goto out;
-	}
-	blen = ALIGN(nb, 4);
-	packet = kzalloc(sizeof(struct if_spi_packet) + blen, GFP_ATOMIC);
-	if (!packet) {
-		err = -ENOMEM;
-		goto out;
-	}
-	packet->blen = blen;
-	memcpy(packet->buffer, buf, nb);
-	memset(packet->buffer + nb, 0, blen - nb);
+	nb = ALIGN(nb, 4);
 
 	switch (type) {
 	case MVMS_CMD:
-		priv->dnld_sent = DNLD_CMD_SENT;
-		spin_lock_irqsave(&card->buffer_lock, flags);
-		list_add_tail(&packet->list, &card->cmd_packet_list);
-		spin_unlock_irqrestore(&card->buffer_lock, flags);
+		err = spu_write(card, IF_SPI_CMD_RDWRPORT_REG, buf, nb);
 		break;
 	case MVMS_DAT:
-		priv->dnld_sent = DNLD_DATA_SENT;
-		spin_lock_irqsave(&card->buffer_lock, flags);
-		list_add_tail(&packet->list, &card->data_packet_list);
-		spin_unlock_irqrestore(&card->buffer_lock, flags);
+		err = spu_write(card, IF_SPI_DATA_RDWRPORT_REG, buf, nb);
 		break;
 	default:
 		lbs_pr_err("can't transfer buffer of type %d", type);
@@ -983,9 +862,6 @@
 		break;
 	}
 
-	/* Wake up the spi thread */
-	up(&card->spi_ready);
-out:
 	lbs_deb_leave_args(LBS_DEB_SPI, "err=%d", err);
 	return err;
 }
@@ -1026,6 +902,10 @@
 		 chip_id_to_device_name[i].name);
 	return 0;
 }
+MODULE_FIRMWARE("libertas/gspi8385_hlp.bin");
+MODULE_FIRMWARE("libertas/gspi8385.bin");
+MODULE_FIRMWARE("libertas/gspi8686_hlp.bin");
+MODULE_FIRMWARE("libertas/gspi8686.bin");
 
 static int __devinit if_spi_probe(struct spi_device *spi)
 {
@@ -1062,9 +942,6 @@
 
 	sema_init(&card->spi_ready, 0);
 	sema_init(&card->spi_thread_terminated, 0);
-	INIT_LIST_HEAD(&card->cmd_packet_list);
-	INIT_LIST_HEAD(&card->data_packet_list);
-	spin_lock_init(&card->buffer_lock);
 
 	/* Initialize the SPI Interface Unit */
 	err = spu_init(card, pdata->use_dummy_writes);
@@ -1117,6 +994,9 @@
 	card->priv = priv;
 	priv->card = card;
 	priv->hw_host_to_card = if_spi_host_to_card;
+	priv->enter_deep_sleep = NULL;
+	priv->exit_deep_sleep = NULL;
+	priv->reset_deep_sleep_wakeup = NULL;
 	priv->fw_ready = 1;
 
 	/* Initialize interrupt handling stuff. */
@@ -1138,6 +1018,9 @@
 		goto terminate_thread;
 	}
 
+	/* poke the IRQ handler so that we don't miss the first interrupt */
+	up(&card->spi_ready);
+
 	/* Start the card.
 	 * This will call register_netdev, and we'll start
 	 * getting interrupts... */
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 3fac4ef..65e1745 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -28,6 +28,8 @@
 static char *lbs_fw_name = "usb8388.bin";
 module_param_named(fw_name, lbs_fw_name, charp, 0644);
 
+MODULE_FIRMWARE("usb8388.bin");
+
 static struct usb_device_id if_usb_table[] = {
 	/* Enter the device signature inside */
 	{ USB_DEVICE(0x1286, 0x2001) },
@@ -300,6 +302,9 @@
 	cardp->priv->fw_ready = 1;
 
 	priv->hw_host_to_card = if_usb_host_to_card;
+	priv->enter_deep_sleep = NULL;
+	priv->exit_deep_sleep = NULL;
+	priv->reset_deep_sleep_wakeup = NULL;
 #ifdef CONFIG_OLPC
 	if (machine_is_olpc())
 		priv->reset_card = if_usb_reset_olpc_card;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 87b4e49..db38a5a 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -14,11 +14,13 @@
 #include <linux/stddef.h>
 #include <linux/ieee80211.h>
 #include <net/iw_handler.h>
+#include <net/cfg80211.h>
 
 #include "host.h"
 #include "decl.h"
 #include "dev.h"
 #include "wext.h"
+#include "cfg.h"
 #include "debugfs.h"
 #include "scan.h"
 #include "assoc.h"
@@ -43,119 +45,6 @@
 struct cmd_confirm_sleep confirm_sleep;
 
 
-#define LBS_TX_PWR_DEFAULT		20	/*100mW */
-#define LBS_TX_PWR_US_DEFAULT		20	/*100mW */
-#define LBS_TX_PWR_JP_DEFAULT		16	/*50mW */
-#define LBS_TX_PWR_FR_DEFAULT		20	/*100mW */
-#define LBS_TX_PWR_EMEA_DEFAULT	20	/*100mW */
-
-/* Format { channel, frequency (MHz), maxtxpower } */
-/* band: 'B/G', region: USA FCC/Canada IC */
-static struct chan_freq_power channel_freq_power_US_BG[] = {
-	{1, 2412, LBS_TX_PWR_US_DEFAULT},
-	{2, 2417, LBS_TX_PWR_US_DEFAULT},
-	{3, 2422, LBS_TX_PWR_US_DEFAULT},
-	{4, 2427, LBS_TX_PWR_US_DEFAULT},
-	{5, 2432, LBS_TX_PWR_US_DEFAULT},
-	{6, 2437, LBS_TX_PWR_US_DEFAULT},
-	{7, 2442, LBS_TX_PWR_US_DEFAULT},
-	{8, 2447, LBS_TX_PWR_US_DEFAULT},
-	{9, 2452, LBS_TX_PWR_US_DEFAULT},
-	{10, 2457, LBS_TX_PWR_US_DEFAULT},
-	{11, 2462, LBS_TX_PWR_US_DEFAULT}
-};
-
-/* band: 'B/G', region: Europe ETSI */
-static struct chan_freq_power channel_freq_power_EU_BG[] = {
-	{1, 2412, LBS_TX_PWR_EMEA_DEFAULT},
-	{2, 2417, LBS_TX_PWR_EMEA_DEFAULT},
-	{3, 2422, LBS_TX_PWR_EMEA_DEFAULT},
-	{4, 2427, LBS_TX_PWR_EMEA_DEFAULT},
-	{5, 2432, LBS_TX_PWR_EMEA_DEFAULT},
-	{6, 2437, LBS_TX_PWR_EMEA_DEFAULT},
-	{7, 2442, LBS_TX_PWR_EMEA_DEFAULT},
-	{8, 2447, LBS_TX_PWR_EMEA_DEFAULT},
-	{9, 2452, LBS_TX_PWR_EMEA_DEFAULT},
-	{10, 2457, LBS_TX_PWR_EMEA_DEFAULT},
-	{11, 2462, LBS_TX_PWR_EMEA_DEFAULT},
-	{12, 2467, LBS_TX_PWR_EMEA_DEFAULT},
-	{13, 2472, LBS_TX_PWR_EMEA_DEFAULT}
-};
-
-/* band: 'B/G', region: Spain */
-static struct chan_freq_power channel_freq_power_SPN_BG[] = {
-	{10, 2457, LBS_TX_PWR_DEFAULT},
-	{11, 2462, LBS_TX_PWR_DEFAULT}
-};
-
-/* band: 'B/G', region: France */
-static struct chan_freq_power channel_freq_power_FR_BG[] = {
-	{10, 2457, LBS_TX_PWR_FR_DEFAULT},
-	{11, 2462, LBS_TX_PWR_FR_DEFAULT},
-	{12, 2467, LBS_TX_PWR_FR_DEFAULT},
-	{13, 2472, LBS_TX_PWR_FR_DEFAULT}
-};
-
-/* band: 'B/G', region: Japan */
-static struct chan_freq_power channel_freq_power_JPN_BG[] = {
-	{1, 2412, LBS_TX_PWR_JP_DEFAULT},
-	{2, 2417, LBS_TX_PWR_JP_DEFAULT},
-	{3, 2422, LBS_TX_PWR_JP_DEFAULT},
-	{4, 2427, LBS_TX_PWR_JP_DEFAULT},
-	{5, 2432, LBS_TX_PWR_JP_DEFAULT},
-	{6, 2437, LBS_TX_PWR_JP_DEFAULT},
-	{7, 2442, LBS_TX_PWR_JP_DEFAULT},
-	{8, 2447, LBS_TX_PWR_JP_DEFAULT},
-	{9, 2452, LBS_TX_PWR_JP_DEFAULT},
-	{10, 2457, LBS_TX_PWR_JP_DEFAULT},
-	{11, 2462, LBS_TX_PWR_JP_DEFAULT},
-	{12, 2467, LBS_TX_PWR_JP_DEFAULT},
-	{13, 2472, LBS_TX_PWR_JP_DEFAULT},
-	{14, 2484, LBS_TX_PWR_JP_DEFAULT}
-};
-
-/**
- * the structure for channel, frequency and power
- */
-struct region_cfp_table {
-	u8 region;
-	struct chan_freq_power *cfp_BG;
-	int cfp_no_BG;
-};
-
-/**
- * the structure for the mapping between region and CFP
- */
-static struct region_cfp_table region_cfp_table[] = {
-	{0x10,			/*US FCC */
-	 channel_freq_power_US_BG,
-	 ARRAY_SIZE(channel_freq_power_US_BG),
-	 }
-	,
-	{0x20,			/*CANADA IC */
-	 channel_freq_power_US_BG,
-	 ARRAY_SIZE(channel_freq_power_US_BG),
-	 }
-	,
-	{0x30, /*EU*/ channel_freq_power_EU_BG,
-	 ARRAY_SIZE(channel_freq_power_EU_BG),
-	 }
-	,
-	{0x31, /*SPAIN*/ channel_freq_power_SPN_BG,
-	 ARRAY_SIZE(channel_freq_power_SPN_BG),
-	 }
-	,
-	{0x32, /*FRANCE*/ channel_freq_power_FR_BG,
-	 ARRAY_SIZE(channel_freq_power_FR_BG),
-	 }
-	,
-	{0x40, /*JAPAN*/ channel_freq_power_JPN_BG,
-	 ARRAY_SIZE(channel_freq_power_JPN_BG),
-	 }
-	,
-/*Add new region here */
-};
-
 /**
  * the table to keep region code
  */
@@ -163,13 +52,6 @@
     { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
 
 /**
- * 802.11b/g supported bitrates (in 500Kb/s units)
- */
-u8 lbs_bg_rates[MAX_RATES] =
-    { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
-0x00, 0x00 };
-
-/**
  * FW rate table.  FW refers to rates by their index in this table, not by the
  * rate value itself.  Values of 0x00 are
  * reserved positions.
@@ -212,107 +94,9 @@
 	return 0;
 }
 
-/**
- * Attributes exported through sysfs
- */
-
-/**
- * @brief Get function for sysfs attribute anycast_mask
- */
-static ssize_t lbs_anycast_get(struct device *dev,
-		struct device_attribute *attr, char * buf)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_access mesh_access;
-	int ret;
-
-	memset(&mesh_access, 0, sizeof(mesh_access));
-
-	ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_ANYCAST, &mesh_access);
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0]));
-}
-
-/**
- * @brief Set function for sysfs attribute anycast_mask
- */
-static ssize_t lbs_anycast_set(struct device *dev,
-		struct device_attribute *attr, const char * buf, size_t count)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_access mesh_access;
-	uint32_t datum;
-	int ret;
-
-	memset(&mesh_access, 0, sizeof(mesh_access));
-	sscanf(buf, "%x", &datum);
-	mesh_access.data[0] = cpu_to_le32(datum);
-
-	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute prb_rsp_limit
- */
-static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_access mesh_access;
-	int ret;
-	u32 retry_limit;
-
-	memset(&mesh_access, 0, sizeof(mesh_access));
-	mesh_access.data[0] = cpu_to_le32(CMD_ACT_GET);
-
-	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
-			&mesh_access);
-	if (ret)
-		return ret;
-
-	retry_limit = le32_to_cpu(mesh_access.data[1]);
-	return snprintf(buf, 10, "%d\n", retry_limit);
-}
-
-/**
- * @brief Set function for sysfs attribute prb_rsp_limit
- */
-static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_access mesh_access;
-	int ret;
-	unsigned long retry_limit;
-
-	memset(&mesh_access, 0, sizeof(mesh_access));
-	mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET);
-
-	if (!strict_strtoul(buf, 10, &retry_limit))
-		return -ENOTSUPP;
-	if (retry_limit > 15)
-		return -ENOTSUPP;
-
-	mesh_access.data[1] = cpu_to_le32(retry_limit);
-
-	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
-			&mesh_access);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
 
 static int lbs_add_rtap(struct lbs_private *priv);
 static void lbs_remove_rtap(struct lbs_private *priv);
-static int lbs_add_mesh(struct lbs_private *priv);
-static void lbs_remove_mesh(struct lbs_private *priv);
 
 
 /**
@@ -378,74 +162,7 @@
 static DEVICE_ATTR(lbs_rtap, 0644, lbs_rtap_get, lbs_rtap_set );
 
 /**
- * Get function for sysfs attribute mesh
- */
-static ssize_t lbs_mesh_get(struct device *dev,
-		struct device_attribute *attr, char * buf)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
-}
-
-/**
- *  Set function for sysfs attribute mesh
- */
-static ssize_t lbs_mesh_set(struct device *dev,
-		struct device_attribute *attr, const char * buf, size_t count)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	int enable;
-	int ret, action = CMD_ACT_MESH_CONFIG_STOP;
-
-	sscanf(buf, "%x", &enable);
-	enable = !!enable;
-	if (enable == !!priv->mesh_dev)
-		return count;
-	if (enable)
-		action = CMD_ACT_MESH_CONFIG_START;
-	ret = lbs_mesh_config(priv, action, priv->curbssparams.channel);
-	if (ret)
-		return ret;
-
-	if (enable)
-		lbs_add_mesh(priv);
-	else
-		lbs_remove_mesh(priv);
-
-	return count;
-}
-
-/**
- * lbs_mesh attribute to be exported per ethX interface
- * through sysfs (/sys/class/net/ethX/lbs_mesh)
- */
-static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
-
-/**
- * anycast_mask attribute to be exported per mshX interface
- * through sysfs (/sys/class/net/mshX/anycast_mask)
- */
-static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
-
-/**
- * prb_rsp_limit attribute to be exported per mshX interface
- * through sysfs (/sys/class/net/mshX/prb_rsp_limit)
- */
-static DEVICE_ATTR(prb_rsp_limit, 0644, lbs_prb_rsp_limit_get,
-		lbs_prb_rsp_limit_set);
-
-static struct attribute *lbs_mesh_sysfs_entries[] = {
-	&dev_attr_anycast_mask.attr,
-	&dev_attr_prb_rsp_limit.attr,
-	NULL,
-};
-
-static struct attribute_group lbs_mesh_attr_group = {
-	.attrs = lbs_mesh_sysfs_entries,
-};
-
-/**
- *  @brief This function opens the ethX or mshX interface
+ *  @brief This function opens the ethX interface
  *
  *  @param dev     A pointer to net_device structure
  *  @return 	   0 or -EBUSY if monitor mode active
@@ -464,18 +181,12 @@
 		goto out;
 	}
 
-	if (dev == priv->mesh_dev) {
-		priv->mesh_open = 1;
-		priv->mesh_connect_status = LBS_CONNECTED;
-		netif_carrier_on(dev);
-	} else {
-		priv->infra_open = 1;
+	priv->infra_open = 1;
 
-		if (priv->connect_status == LBS_CONNECTED)
-			netif_carrier_on(dev);
-		else
-			netif_carrier_off(dev);
-	}
+	if (priv->connect_status == LBS_CONNECTED)
+		netif_carrier_on(dev);
+	else
+		netif_carrier_off(dev);
 
 	if (!priv->tx_pending_len)
 		netif_wake_queue(dev);
@@ -487,33 +198,6 @@
 }
 
 /**
- *  @brief This function closes the mshX interface
- *
- *  @param dev     A pointer to net_device structure
- *  @return 	   0
- */
-static int lbs_mesh_stop(struct net_device *dev)
-{
-	struct lbs_private *priv = dev->ml_priv;
-
-	lbs_deb_enter(LBS_DEB_MESH);
-	spin_lock_irq(&priv->driver_lock);
-
-	priv->mesh_open = 0;
-	priv->mesh_connect_status = LBS_DISCONNECTED;
-
-	netif_stop_queue(dev);
-	netif_carrier_off(dev);
-
-	spin_unlock_irq(&priv->driver_lock);
-
-	schedule_work(&priv->mcast_work);
-
-	lbs_deb_leave(LBS_DEB_MESH);
-	return 0;
-}
-
-/**
  *  @brief This function closes the ethX interface
  *
  *  @param dev     A pointer to net_device structure
@@ -574,15 +258,17 @@
 	priv->dnld_sent = DNLD_RES_RECEIVED;
 
 	/* Wake main thread if commands are pending */
-	if (!priv->cur_cmd || priv->tx_pending_len > 0)
-		wake_up_interruptible(&priv->waitq);
+	if (!priv->cur_cmd || priv->tx_pending_len > 0) {
+		if (!priv->wakeup_dev_required)
+			wake_up_interruptible(&priv->waitq);
+	}
 
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
 	lbs_deb_leave(LBS_DEB_THREAD);
 }
 EXPORT_SYMBOL_GPL(lbs_host_to_card_done);
 
-static int lbs_set_mac_address(struct net_device *dev, void *addr)
+int lbs_set_mac_address(struct net_device *dev, void *addr)
 {
 	int ret = 0;
 	struct lbs_private *priv = dev->ml_priv;
@@ -716,7 +402,7 @@
 	lbs_deb_leave(LBS_DEB_NET);
 }
 
-static void lbs_set_multicast_list(struct net_device *dev)
+void lbs_set_multicast_list(struct net_device *dev)
 {
 	struct lbs_private *priv = dev->ml_priv;
 
@@ -770,7 +456,8 @@
 			shouldsleep = 0;	/* We have a command response */
 		else if (priv->cur_cmd)
 			shouldsleep = 1;	/* Can't send a command; one already running */
-		else if (!list_empty(&priv->cmdpendingq))
+		else if (!list_empty(&priv->cmdpendingq) &&
+					!(priv->wakeup_dev_required))
 			shouldsleep = 0;	/* We have a command to send */
 		else if (__kfifo_len(priv->event_fifo))
 			shouldsleep = 0;	/* We have an event to process */
@@ -822,6 +509,26 @@
 		}
 		spin_unlock_irq(&priv->driver_lock);
 
+		/* Process hardware events, e.g. card removed, link lost */
+		spin_lock_irq(&priv->driver_lock);
+		while (__kfifo_len(priv->event_fifo)) {
+			u32 event;
+			__kfifo_get(priv->event_fifo, (unsigned char *) &event,
+				sizeof(event));
+			spin_unlock_irq(&priv->driver_lock);
+			lbs_process_event(priv, event);
+			spin_lock_irq(&priv->driver_lock);
+		}
+		spin_unlock_irq(&priv->driver_lock);
+
+		if (priv->wakeup_dev_required) {
+			lbs_deb_thread("Waking up device...\n");
+			/* Wake up device */
+			if (priv->exit_deep_sleep(priv))
+				lbs_deb_thread("Wakeup device failed\n");
+			continue;
+		}
+
 		/* command timeout stuff */
 		if (priv->cmd_timed_out && priv->cur_cmd) {
 			struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
@@ -849,18 +556,7 @@
 		}
 		priv->cmd_timed_out = 0;
 
-		/* Process hardware events, e.g. card removed, link lost */
-		spin_lock_irq(&priv->driver_lock);
-		while (__kfifo_len(priv->event_fifo)) {
-			u32 event;
 
-			__kfifo_get(priv->event_fifo, (unsigned char *) &event,
-				sizeof(event));
-			spin_unlock_irq(&priv->driver_lock);
-			lbs_process_event(priv, event);
-			spin_lock_irq(&priv->driver_lock);
-		}
-		spin_unlock_irq(&priv->driver_lock);
 
 		if (!priv->fw_ready)
 			continue;
@@ -894,6 +590,9 @@
 		    (priv->psstate == PS_STATE_PRE_SLEEP))
 			continue;
 
+		if (priv->is_deep_sleep)
+			continue;
+
 		/* Execute the next command */
 		if (!priv->dnld_sent && !priv->cur_cmd)
 			lbs_execute_next_command(priv);
@@ -928,6 +627,7 @@
 	}
 
 	del_timer(&priv->command_timer);
+	del_timer(&priv->auto_deepsleep_timer);
 	wake_up_all(&priv->cmd_pending);
 
 	lbs_deb_leave(LBS_DEB_THREAD);
@@ -1050,6 +750,62 @@
 	lbs_deb_leave(LBS_DEB_CMD);
 }
 
+/**
+ *  This function put the device back to deep sleep mode when timer expires
+ *  and no activity (command, event, data etc.) is detected.
+ */
+static void auto_deepsleep_timer_fn(unsigned long data)
+{
+	struct lbs_private *priv = (struct lbs_private *)data;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (priv->is_activity_detected) {
+		priv->is_activity_detected = 0;
+	} else {
+		if (priv->is_auto_deep_sleep_enabled &&
+				(!priv->wakeup_dev_required) &&
+				(priv->connect_status != LBS_CONNECTED)) {
+			lbs_deb_main("Entering auto deep sleep mode...\n");
+			ret = lbs_prepare_and_send_command(priv,
+					CMD_802_11_DEEP_SLEEP, 0,
+					0, 0, NULL);
+			if (ret)
+				lbs_pr_err("Enter Deep Sleep command failed\n");
+		}
+	}
+	mod_timer(&priv->auto_deepsleep_timer , jiffies +
+				(priv->auto_deep_sleep_timeout * HZ)/1000);
+	lbs_deb_leave(LBS_DEB_CMD);
+}
+
+int lbs_enter_auto_deep_sleep(struct lbs_private *priv)
+{
+	lbs_deb_enter(LBS_DEB_SDIO);
+
+	priv->is_auto_deep_sleep_enabled = 1;
+	if (priv->is_deep_sleep)
+		priv->wakeup_dev_required = 1;
+	mod_timer(&priv->auto_deepsleep_timer ,
+			jiffies + (priv->auto_deep_sleep_timeout * HZ)/1000);
+
+	lbs_deb_leave(LBS_DEB_SDIO);
+	return 0;
+}
+
+int lbs_exit_auto_deep_sleep(struct lbs_private *priv)
+{
+	lbs_deb_enter(LBS_DEB_SDIO);
+
+	priv->is_auto_deep_sleep_enabled = 0;
+	priv->auto_deep_sleep_timeout = 0;
+	del_timer(&priv->auto_deepsleep_timer);
+
+	lbs_deb_leave(LBS_DEB_SDIO);
+	return 0;
+}
+
 static void lbs_sync_channel_worker(struct work_struct *work)
 {
 	struct lbs_private *priv = container_of(work, struct lbs_private,
@@ -1092,18 +848,24 @@
 	priv->mesh_connect_status = LBS_DISCONNECTED;
 	priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
 	priv->mode = IW_MODE_INFRA;
-	priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL;
+	priv->channel = DEFAULT_AD_HOC_CHANNEL;
 	priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
 	priv->radio_on = 1;
 	priv->enablehwauto = 1;
 	priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE;
 	priv->psmode = LBS802_11POWERMODECAM;
 	priv->psstate = PS_STATE_FULL_POWER;
+	priv->is_deep_sleep = 0;
+	priv->is_auto_deep_sleep_enabled = 0;
+	priv->wakeup_dev_required = 0;
+	init_waitqueue_head(&priv->ds_awake_q);
 
 	mutex_init(&priv->lock);
 
 	setup_timer(&priv->command_timer, command_timer_fn,
 		(unsigned long)priv);
+	setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn,
+			(unsigned long)priv);
 
 	INIT_LIST_HEAD(&priv->cmdfreeq);
 	INIT_LIST_HEAD(&priv->cmdpendingq);
@@ -1142,6 +904,7 @@
 	if (priv->event_fifo)
 		kfifo_free(priv->event_fifo);
 	del_timer(&priv->command_timer);
+	del_timer(&priv->auto_deepsleep_timer);
 	kfree(priv->networks);
 	priv->networks = NULL;
 
@@ -1168,31 +931,41 @@
  */
 struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 {
-	struct net_device *dev = NULL;
+	struct net_device *dev;
+	struct wireless_dev *wdev;
 	struct lbs_private *priv = NULL;
 
 	lbs_deb_enter(LBS_DEB_MAIN);
 
 	/* Allocate an Ethernet device and register it */
-	dev = alloc_etherdev(sizeof(struct lbs_private));
-	if (!dev) {
-		lbs_pr_err("init wlanX device failed\n");
+	wdev = lbs_cfg_alloc(dmdev);
+	if (IS_ERR(wdev)) {
+		lbs_pr_err("cfg80211 init failed\n");
 		goto done;
 	}
-	priv = netdev_priv(dev);
-	dev->ml_priv = priv;
+	/* TODO? */
+	wdev->iftype = NL80211_IFTYPE_STATION;
+	priv = wdev_priv(wdev);
+	priv->wdev = wdev;
 
 	if (lbs_init_adapter(priv)) {
 		lbs_pr_err("failed to initialize adapter structure.\n");
-		goto err_init_adapter;
+		goto err_wdev;
 	}
 
-	priv->dev = dev;
-	priv->card = card;
-	priv->mesh_open = 0;
-	priv->infra_open = 0;
+	//TODO? dev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES);
+	dev = alloc_netdev(0, "wlan%d", ether_setup);
+	if (!dev) {
+		dev_err(dmdev, "no memory for network device instance\n");
+		goto err_adapter;
+	}
 
-	/* Setup the OS Interface to our functions */
+	dev->ieee80211_ptr = wdev;
+	dev->ml_priv = priv;
+	SET_NETDEV_DEV(dev, dmdev);
+	wdev->netdev = dev;
+	priv->dev = dev;
+
  	dev->netdev_ops = &lbs_netdev_ops;
 	dev->watchdog_timeo = 5 * HZ;
 	dev->ethtool_ops = &lbs_ethtool_ops;
@@ -1201,7 +974,13 @@
 #endif
 	dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
 
-	SET_NETDEV_DEV(dev, dmdev);
+
+	// TODO: kzalloc + iwm_init_default_profile(iwm, iwm->umac_profile); ??
+
+
+	priv->card = card;
+	priv->infra_open = 0;
+
 
 	priv->rtap_net_dev = NULL;
 	strcpy(dev->name, "wlan%d");
@@ -1211,7 +990,7 @@
 	priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main");
 	if (IS_ERR(priv->main_thread)) {
 		lbs_deb_thread("Error creating main thread.\n");
-		goto err_init_adapter;
+		goto err_ndev;
 	}
 
 	priv->work_thread = create_singlethread_workqueue("lbs_worker");
@@ -1220,6 +999,7 @@
 	INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
 	INIT_WORK(&priv->sync_channel, lbs_sync_channel_worker);
 
+	priv->mesh_open = 0;
 	sprintf(priv->mesh_ssid, "mesh");
 	priv->mesh_ssid_len = 4;
 
@@ -1228,9 +1008,15 @@
 
 	goto done;
 
-err_init_adapter:
-	lbs_free_adapter(priv);
+ err_ndev:
 	free_netdev(dev);
+
+ err_adapter:
+	lbs_free_adapter(priv);
+
+ err_wdev:
+	lbs_cfg_free(priv);
+
 	priv = NULL;
 
 done:
@@ -1243,7 +1029,6 @@
 void lbs_remove_card(struct lbs_private *priv)
 {
 	struct net_device *dev = priv->dev;
-	union iwreq_data wrqu;
 
 	lbs_deb_enter(LBS_DEB_MAIN);
 
@@ -1268,15 +1053,19 @@
 		lbs_ps_wakeup(priv, CMD_OPTION_WAITFORRSP);
 	}
 
-	memset(wrqu.ap_addr.sa_data, 0xaa, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+	lbs_send_disconnect_notification(priv);
+
+	if (priv->is_deep_sleep) {
+		priv->is_deep_sleep = 0;
+		wake_up_interruptible(&priv->ds_awake_q);
+	}
 
 	/* Stop the thread servicing the interrupts */
 	priv->surpriseremoved = 1;
 	kthread_stop(priv->main_thread);
 
 	lbs_free_adapter(priv);
+	lbs_cfg_free(priv);
 
 	priv->dev = NULL;
 	free_netdev(dev);
@@ -1298,60 +1087,19 @@
 	if (ret)
 		goto done;
 
-	/* init 802.11d */
-	lbs_init_11d(priv);
-
-	if (register_netdev(dev)) {
-		lbs_pr_err("cannot register ethX device\n");
+	if (lbs_cfg_register(priv)) {
+		lbs_pr_err("cannot register device\n");
 		goto done;
 	}
 
 	lbs_update_channel(priv);
 
-	/* Check mesh FW version and appropriately send the mesh start
-	 * command
+	/*
+	 * While rtap isn't related to mesh, only mesh-enabled
+	 * firmware implements the rtap functionality via
+	 * CMD_802_11_MONITOR_MODE.
 	 */
-	if (priv->mesh_fw_ver == MESH_FW_OLD) {
-		/* Enable mesh, if supported, and work out which TLV it uses.
-		   0x100 + 291 is an unofficial value used in 5.110.20.pXX
-		   0x100 + 37 is the official value used in 5.110.21.pXX
-		   but we check them in that order because 20.pXX doesn't
-		   give an error -- it just silently fails. */
-
-		/* 5.110.20.pXX firmware will fail the command if the channel
-		   doesn't match the existing channel. But only if the TLV
-		   is correct. If the channel is wrong, _BOTH_ versions will
-		   give an error to 0x100+291, and allow 0x100+37 to succeed.
-		   It's just that 5.110.20.pXX will not have done anything
-		   useful */
-
-		priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
-		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-				    priv->curbssparams.channel)) {
-			priv->mesh_tlv = TLV_TYPE_MESH_ID;
-			if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-					    priv->curbssparams.channel))
-				priv->mesh_tlv = 0;
-		}
-	} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
-		/* 10.0.0.pXX new firmwares should succeed with TLV
-		 * 0x100+37; Do not invoke command with old TLV.
-		 */
-		priv->mesh_tlv = TLV_TYPE_MESH_ID;
-		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-				    priv->curbssparams.channel))
-			priv->mesh_tlv = 0;
-	}
-	if (priv->mesh_tlv) {
-		lbs_add_mesh(priv);
-
-		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
-			lbs_pr_err("cannot register lbs_mesh attribute\n");
-
-		/* While rtap isn't related to mesh, only mesh-enabled
-		 * firmware implements the rtap functionality via
-		 * CMD_802_11_MONITOR_MODE.
-		 */
+	if (lbs_init_mesh(priv)) {
 		if (device_create_file(&dev->dev, &dev_attr_lbs_rtap))
 			lbs_pr_err("cannot register lbs_rtap attribute\n");
 	}
@@ -1385,13 +1133,12 @@
 	netif_carrier_off(dev);
 
 	lbs_debugfs_remove_one(priv);
-	if (priv->mesh_tlv) {
-		device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
+	if (lbs_deinit_mesh(priv))
 		device_remove_file(&dev->dev, &dev_attr_lbs_rtap);
-	}
 
 	/* Delete the timeout of the currently processing command */
 	del_timer_sync(&priv->command_timer);
+	del_timer_sync(&priv->auto_deepsleep_timer);
 
 	/* Flush pending command nodes */
 	spin_lock_irqsave(&priv->driver_lock, flags);
@@ -1420,157 +1167,6 @@
 EXPORT_SYMBOL_GPL(lbs_stop_card);
 
 
-static const struct net_device_ops mesh_netdev_ops = {
-	.ndo_open		= lbs_dev_open,
-	.ndo_stop 		= lbs_mesh_stop,
-	.ndo_start_xmit		= lbs_hard_start_xmit,
-	.ndo_set_mac_address	= lbs_set_mac_address,
-	.ndo_set_multicast_list = lbs_set_multicast_list,
-};
-
-/**
- * @brief This function adds mshX interface
- *
- *  @param priv    A pointer to the struct lbs_private structure
- *  @return 	   0 if successful, -X otherwise
- */
-static int lbs_add_mesh(struct lbs_private *priv)
-{
-	struct net_device *mesh_dev = NULL;
-	int ret = 0;
-
-	lbs_deb_enter(LBS_DEB_MESH);
-
-	/* Allocate a virtual mesh device */
-	if (!(mesh_dev = alloc_netdev(0, "msh%d", ether_setup))) {
-		lbs_deb_mesh("init mshX device failed\n");
-		ret = -ENOMEM;
-		goto done;
-	}
-	mesh_dev->ml_priv = priv;
-	priv->mesh_dev = mesh_dev;
-
-	mesh_dev->netdev_ops = &mesh_netdev_ops;
-	mesh_dev->ethtool_ops = &lbs_ethtool_ops;
-	memcpy(mesh_dev->dev_addr, priv->dev->dev_addr,
-			sizeof(priv->dev->dev_addr));
-
-	SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
-
-#ifdef	WIRELESS_EXT
-	mesh_dev->wireless_handlers = (struct iw_handler_def *)&mesh_handler_def;
-#endif
-	mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
-	/* Register virtual mesh interface */
-	ret = register_netdev(mesh_dev);
-	if (ret) {
-		lbs_pr_err("cannot register mshX virtual interface\n");
-		goto err_free;
-	}
-
-	ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
-	if (ret)
-		goto err_unregister;
-
-	lbs_persist_config_init(mesh_dev);
-
-	/* Everything successful */
-	ret = 0;
-	goto done;
-
-err_unregister:
-	unregister_netdev(mesh_dev);
-
-err_free:
-	free_netdev(mesh_dev);
-
-done:
-	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
-	return ret;
-}
-
-static void lbs_remove_mesh(struct lbs_private *priv)
-{
-	struct net_device *mesh_dev;
-
-
-	mesh_dev = priv->mesh_dev;
-	if (!mesh_dev)
-		return;
-
-	lbs_deb_enter(LBS_DEB_MESH);
-	netif_stop_queue(mesh_dev);
-	netif_carrier_off(mesh_dev);
-	sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
-	lbs_persist_config_remove(mesh_dev);
-	unregister_netdev(mesh_dev);
-	priv->mesh_dev = NULL;
-	free_netdev(mesh_dev);
-	lbs_deb_leave(LBS_DEB_MESH);
-}
-
-/**
- *  @brief This function finds the CFP in
- *  region_cfp_table based on region and band parameter.
- *
- *  @param region  The region code
- *  @param band	   The band
- *  @param cfp_no  A pointer to CFP number
- *  @return 	   A pointer to CFP
- */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no)
-{
-	int i, end;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-
-	end = ARRAY_SIZE(region_cfp_table);
-
-	for (i = 0; i < end ; i++) {
-		lbs_deb_main("region_cfp_table[i].region=%d\n",
-			region_cfp_table[i].region);
-		if (region_cfp_table[i].region == region) {
-			*cfp_no = region_cfp_table[i].cfp_no_BG;
-			lbs_deb_leave(LBS_DEB_MAIN);
-			return region_cfp_table[i].cfp_BG;
-		}
-	}
-
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL");
-	return NULL;
-}
-
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band)
-{
-	int ret = 0;
-	int i = 0;
-
-	struct chan_freq_power *cfp;
-	int cfp_no;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-
-	memset(priv->region_channel, 0, sizeof(priv->region_channel));
-
-	cfp = lbs_get_region_cfp_table(region, &cfp_no);
-	if (cfp != NULL) {
-		priv->region_channel[i].nrcfp = cfp_no;
-		priv->region_channel[i].CFP = cfp;
-	} else {
-		lbs_deb_main("wrong region code %#x in band B/G\n",
-		       region);
-		ret = -1;
-		goto out;
-	}
-	priv->region_channel[i].valid = 1;
-	priv->region_channel[i].region = region;
-	priv->region_channel[i].band = band;
-	i++;
-out:
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-	return ret;
-}
-
 void lbs_queue_event(struct lbs_private *priv, u32 event)
 {
 	unsigned long flags;
diff --git a/drivers/net/wireless/libertas/mesh.c b/drivers/net/wireless/libertas/mesh.c
new file mode 100644
index 0000000..2f91c9b
--- /dev/null
+++ b/drivers/net/wireless/libertas/mesh.c
@@ -0,0 +1,1141 @@
+#include <linux/moduleparam.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/kthread.h>
+#include <linux/kfifo.h>
+
+#include "mesh.h"
+#include "decl.h"
+#include "cmd.h"
+
+
+/***************************************************************************
+ * Mesh sysfs support
+ */
+
+/**
+ * Attributes exported through sysfs
+ */
+
+/**
+ * @brief Get function for sysfs attribute anycast_mask
+ */
+static ssize_t lbs_anycast_get(struct device *dev,
+		struct device_attribute *attr, char * buf)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_access mesh_access;
+	int ret;
+
+	memset(&mesh_access, 0, sizeof(mesh_access));
+
+	ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_ANYCAST, &mesh_access);
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 12, "0x%X\n", le32_to_cpu(mesh_access.data[0]));
+}
+
+/**
+ * @brief Set function for sysfs attribute anycast_mask
+ */
+static ssize_t lbs_anycast_set(struct device *dev,
+		struct device_attribute *attr, const char * buf, size_t count)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_access mesh_access;
+	uint32_t datum;
+	int ret;
+
+	memset(&mesh_access, 0, sizeof(mesh_access));
+	sscanf(buf, "%x", &datum);
+	mesh_access.data[0] = cpu_to_le32(datum);
+
+	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_ANYCAST, &mesh_access);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute prb_rsp_limit
+ */
+static ssize_t lbs_prb_rsp_limit_get(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_access mesh_access;
+	int ret;
+	u32 retry_limit;
+
+	memset(&mesh_access, 0, sizeof(mesh_access));
+	mesh_access.data[0] = cpu_to_le32(CMD_ACT_GET);
+
+	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
+			&mesh_access);
+	if (ret)
+		return ret;
+
+	retry_limit = le32_to_cpu(mesh_access.data[1]);
+	return snprintf(buf, 10, "%d\n", retry_limit);
+}
+
+/**
+ * @brief Set function for sysfs attribute prb_rsp_limit
+ */
+static ssize_t lbs_prb_rsp_limit_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_access mesh_access;
+	int ret;
+	unsigned long retry_limit;
+
+	memset(&mesh_access, 0, sizeof(mesh_access));
+	mesh_access.data[0] = cpu_to_le32(CMD_ACT_SET);
+
+	if (!strict_strtoul(buf, 10, &retry_limit))
+		return -ENOTSUPP;
+	if (retry_limit > 15)
+		return -ENOTSUPP;
+
+	mesh_access.data[1] = cpu_to_le32(retry_limit);
+
+	ret = lbs_mesh_access(priv, CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT,
+			&mesh_access);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * Get function for sysfs attribute mesh
+ */
+static ssize_t lbs_mesh_get(struct device *dev,
+		struct device_attribute *attr, char * buf)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	return snprintf(buf, 5, "0x%X\n", !!priv->mesh_dev);
+}
+
+/**
+ *  Set function for sysfs attribute mesh
+ */
+static ssize_t lbs_mesh_set(struct device *dev,
+		struct device_attribute *attr, const char * buf, size_t count)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	int enable;
+	int ret, action = CMD_ACT_MESH_CONFIG_STOP;
+
+	sscanf(buf, "%x", &enable);
+	enable = !!enable;
+	if (enable == !!priv->mesh_dev)
+		return count;
+	if (enable)
+		action = CMD_ACT_MESH_CONFIG_START;
+	ret = lbs_mesh_config(priv, action, priv->channel);
+	if (ret)
+		return ret;
+
+	if (enable)
+		lbs_add_mesh(priv);
+	else
+		lbs_remove_mesh(priv);
+
+	return count;
+}
+
+/**
+ * lbs_mesh attribute to be exported per ethX interface
+ * through sysfs (/sys/class/net/ethX/lbs_mesh)
+ */
+static DEVICE_ATTR(lbs_mesh, 0644, lbs_mesh_get, lbs_mesh_set);
+
+/**
+ * anycast_mask attribute to be exported per mshX interface
+ * through sysfs (/sys/class/net/mshX/anycast_mask)
+ */
+static DEVICE_ATTR(anycast_mask, 0644, lbs_anycast_get, lbs_anycast_set);
+
+/**
+ * prb_rsp_limit attribute to be exported per mshX interface
+ * through sysfs (/sys/class/net/mshX/prb_rsp_limit)
+ */
+static DEVICE_ATTR(prb_rsp_limit, 0644, lbs_prb_rsp_limit_get,
+		lbs_prb_rsp_limit_set);
+
+static struct attribute *lbs_mesh_sysfs_entries[] = {
+	&dev_attr_anycast_mask.attr,
+	&dev_attr_prb_rsp_limit.attr,
+	NULL,
+};
+
+static struct attribute_group lbs_mesh_attr_group = {
+	.attrs = lbs_mesh_sysfs_entries,
+};
+
+
+
+/***************************************************************************
+ * Initializing and starting, stopping mesh
+ */
+
+/*
+ * Check mesh FW version and appropriately send the mesh start
+ * command
+ */
+int lbs_init_mesh(struct lbs_private *priv)
+{
+	struct net_device *dev = priv->dev;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_MESH);
+
+	if (priv->mesh_fw_ver == MESH_FW_OLD) {
+		/* Enable mesh, if supported, and work out which TLV it uses.
+		   0x100 + 291 is an unofficial value used in 5.110.20.pXX
+		   0x100 + 37 is the official value used in 5.110.21.pXX
+		   but we check them in that order because 20.pXX doesn't
+		   give an error -- it just silently fails. */
+
+		/* 5.110.20.pXX firmware will fail the command if the channel
+		   doesn't match the existing channel. But only if the TLV
+		   is correct. If the channel is wrong, _BOTH_ versions will
+		   give an error to 0x100+291, and allow 0x100+37 to succeed.
+		   It's just that 5.110.20.pXX will not have done anything
+		   useful */
+
+		priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
+		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
+				    priv->channel)) {
+			priv->mesh_tlv = TLV_TYPE_MESH_ID;
+			if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
+					    priv->channel))
+				priv->mesh_tlv = 0;
+		}
+	} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+		/* 10.0.0.pXX new firmwares should succeed with TLV
+		 * 0x100+37; Do not invoke command with old TLV.
+		 */
+		priv->mesh_tlv = TLV_TYPE_MESH_ID;
+		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
+				    priv->channel))
+			priv->mesh_tlv = 0;
+	}
+	if (priv->mesh_tlv) {
+		lbs_add_mesh(priv);
+
+		if (device_create_file(&dev->dev, &dev_attr_lbs_mesh))
+			lbs_pr_err("cannot register lbs_mesh attribute\n");
+
+		ret = 1;
+	}
+
+	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
+	return ret;
+}
+
+
+int lbs_deinit_mesh(struct lbs_private *priv)
+{
+	struct net_device *dev = priv->dev;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_MESH);
+
+	if (priv->mesh_tlv) {
+		device_remove_file(&dev->dev, &dev_attr_lbs_mesh);
+		ret = 1;
+	}
+
+	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
+	return ret;
+}
+
+
+/**
+ *  @brief This function closes the mshX interface
+ *
+ *  @param dev     A pointer to net_device structure
+ *  @return 	   0
+ */
+static int lbs_mesh_stop(struct net_device *dev)
+{
+	struct lbs_private *priv = dev->ml_priv;
+
+	lbs_deb_enter(LBS_DEB_MESH);
+	spin_lock_irq(&priv->driver_lock);
+
+	priv->mesh_open = 0;
+	priv->mesh_connect_status = LBS_DISCONNECTED;
+
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+
+	spin_unlock_irq(&priv->driver_lock);
+
+	schedule_work(&priv->mcast_work);
+
+	lbs_deb_leave(LBS_DEB_MESH);
+	return 0;
+}
+
+/**
+ *  @brief This function opens the mshX interface
+ *
+ *  @param dev     A pointer to net_device structure
+ *  @return 	   0 or -EBUSY if monitor mode active
+ */
+static int lbs_mesh_dev_open(struct net_device *dev)
+{
+	struct lbs_private *priv = dev->ml_priv;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_NET);
+
+	spin_lock_irq(&priv->driver_lock);
+
+	if (priv->monitormode) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	priv->mesh_open = 1;
+	priv->mesh_connect_status = LBS_CONNECTED;
+	netif_carrier_on(dev);
+
+	if (!priv->tx_pending_len)
+		netif_wake_queue(dev);
+ out:
+
+	spin_unlock_irq(&priv->driver_lock);
+	lbs_deb_leave_args(LBS_DEB_NET, "ret %d", ret);
+	return ret;
+}
+
+static const struct net_device_ops mesh_netdev_ops = {
+	.ndo_open		= lbs_mesh_dev_open,
+	.ndo_stop 		= lbs_mesh_stop,
+	.ndo_start_xmit		= lbs_hard_start_xmit,
+	.ndo_set_mac_address	= lbs_set_mac_address,
+	.ndo_set_multicast_list = lbs_set_multicast_list,
+};
+
+/**
+ * @brief This function adds mshX interface
+ *
+ *  @param priv    A pointer to the struct lbs_private structure
+ *  @return 	   0 if successful, -X otherwise
+ */
+int lbs_add_mesh(struct lbs_private *priv)
+{
+	struct net_device *mesh_dev = NULL;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_MESH);
+
+	/* Allocate a virtual mesh device */
+	mesh_dev = alloc_netdev(0, "msh%d", ether_setup);
+	if (!mesh_dev) {
+		lbs_deb_mesh("init mshX device failed\n");
+		ret = -ENOMEM;
+		goto done;
+	}
+	mesh_dev->ml_priv = priv;
+	priv->mesh_dev = mesh_dev;
+
+	mesh_dev->netdev_ops = &mesh_netdev_ops;
+	mesh_dev->ethtool_ops = &lbs_ethtool_ops;
+	memcpy(mesh_dev->dev_addr, priv->dev->dev_addr,
+			sizeof(priv->dev->dev_addr));
+
+	SET_NETDEV_DEV(priv->mesh_dev, priv->dev->dev.parent);
+
+#ifdef	WIRELESS_EXT
+	mesh_dev->wireless_handlers = &mesh_handler_def;
+#endif
+	mesh_dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
+	/* Register virtual mesh interface */
+	ret = register_netdev(mesh_dev);
+	if (ret) {
+		lbs_pr_err("cannot register mshX virtual interface\n");
+		goto err_free;
+	}
+
+	ret = sysfs_create_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
+	if (ret)
+		goto err_unregister;
+
+	lbs_persist_config_init(mesh_dev);
+
+	/* Everything successful */
+	ret = 0;
+	goto done;
+
+err_unregister:
+	unregister_netdev(mesh_dev);
+
+err_free:
+	free_netdev(mesh_dev);
+
+done:
+	lbs_deb_leave_args(LBS_DEB_MESH, "ret %d", ret);
+	return ret;
+}
+
+void lbs_remove_mesh(struct lbs_private *priv)
+{
+	struct net_device *mesh_dev;
+
+	mesh_dev = priv->mesh_dev;
+	if (!mesh_dev)
+		return;
+
+	lbs_deb_enter(LBS_DEB_MESH);
+	netif_stop_queue(mesh_dev);
+	netif_carrier_off(mesh_dev);
+	sysfs_remove_group(&(mesh_dev->dev.kobj), &lbs_mesh_attr_group);
+	lbs_persist_config_remove(mesh_dev);
+	unregister_netdev(mesh_dev);
+	priv->mesh_dev = NULL;
+	free_netdev(mesh_dev);
+	lbs_deb_leave(LBS_DEB_MESH);
+}
+
+
+
+/***************************************************************************
+ * Sending and receiving
+ */
+struct net_device *lbs_mesh_set_dev(struct lbs_private *priv,
+	struct net_device *dev, struct rxpd *rxpd)
+{
+	if (priv->mesh_dev) {
+		if (priv->mesh_fw_ver == MESH_FW_OLD) {
+			if (rxpd->rx_control & RxPD_MESH_FRAME)
+				dev = priv->mesh_dev;
+		} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
+			if (rxpd->u.bss.bss_num == MESH_IFACE_ID)
+				dev = priv->mesh_dev;
+		}
+	}
+	return dev;
+}
+
+
+void lbs_mesh_set_txpd(struct lbs_private *priv,
+	struct net_device *dev, struct txpd *txpd)
+{
+	if (dev == priv->mesh_dev) {
+		if (priv->mesh_fw_ver == MESH_FW_OLD)
+			txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
+		else if (priv->mesh_fw_ver == MESH_FW_NEW)
+			txpd->u.bss.bss_num = MESH_IFACE_ID;
+	}
+}
+
+
+/***************************************************************************
+ * Mesh command handling
+ */
+
+int lbs_cmd_bt_access(struct cmd_ds_command *cmd,
+			       u16 cmd_action, void *pdata_buf)
+{
+	struct cmd_ds_bt_access *bt_access = &cmd->params.bt;
+	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
+
+	cmd->command = cpu_to_le16(CMD_BT_ACCESS);
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_bt_access) +
+		sizeof(struct cmd_header));
+	cmd->result = 0;
+	bt_access->action = cpu_to_le16(cmd_action);
+
+	switch (cmd_action) {
+	case CMD_ACT_BT_ACCESS_ADD:
+		memcpy(bt_access->addr1, pdata_buf, 2 * ETH_ALEN);
+		lbs_deb_hex(LBS_DEB_MESH, "BT_ADD: blinded MAC addr",
+			bt_access->addr1, 6);
+		break;
+	case CMD_ACT_BT_ACCESS_DEL:
+		memcpy(bt_access->addr1, pdata_buf, 1 * ETH_ALEN);
+		lbs_deb_hex(LBS_DEB_MESH, "BT_DEL: blinded MAC addr",
+			bt_access->addr1, 6);
+		break;
+	case CMD_ACT_BT_ACCESS_LIST:
+		bt_access->id = cpu_to_le32(*(u32 *) pdata_buf);
+		break;
+	case CMD_ACT_BT_ACCESS_RESET:
+		break;
+	case CMD_ACT_BT_ACCESS_SET_INVERT:
+		bt_access->id = cpu_to_le32(*(u32 *) pdata_buf);
+		break;
+	case CMD_ACT_BT_ACCESS_GET_INVERT:
+		break;
+	default:
+		break;
+	}
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+int lbs_cmd_fwt_access(struct cmd_ds_command *cmd,
+			       u16 cmd_action, void *pdata_buf)
+{
+	struct cmd_ds_fwt_access *fwt_access = &cmd->params.fwt;
+	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
+
+	cmd->command = cpu_to_le16(CMD_FWT_ACCESS);
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access) +
+		sizeof(struct cmd_header));
+	cmd->result = 0;
+
+	if (pdata_buf)
+		memcpy(fwt_access, pdata_buf, sizeof(*fwt_access));
+	else
+		memset(fwt_access, 0, sizeof(*fwt_access));
+
+	fwt_access->action = cpu_to_le16(cmd_action);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
+		    struct cmd_ds_mesh_access *cmd)
+{
+	int ret;
+
+	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
+
+	cmd->hdr.command = cpu_to_le16(CMD_MESH_ACCESS);
+	cmd->hdr.size = cpu_to_le16(sizeof(*cmd));
+	cmd->hdr.result = 0;
+
+	cmd->action = cpu_to_le16(cmd_action);
+
+	ret = lbs_cmd_with_response(priv, CMD_MESH_ACCESS, cmd);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return ret;
+}
+
+static int __lbs_mesh_config_send(struct lbs_private *priv,
+				  struct cmd_ds_mesh_config *cmd,
+				  uint16_t action, uint16_t type)
+{
+	int ret;
+	u16 command = CMD_MESH_CONFIG_OLD;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	/*
+	 * Command id is 0xac for v10 FW along with mesh interface
+	 * id in bits 14-13-12.
+	 */
+	if (priv->mesh_fw_ver == MESH_FW_NEW)
+		command = CMD_MESH_CONFIG |
+			  (MESH_IFACE_ID << MESH_IFACE_BIT_OFFSET);
+
+	cmd->hdr.command = cpu_to_le16(command);
+	cmd->hdr.size = cpu_to_le16(sizeof(struct cmd_ds_mesh_config));
+	cmd->hdr.result = 0;
+
+	cmd->type = cpu_to_le16(type);
+	cmd->action = cpu_to_le16(action);
+
+	ret = lbs_cmd_with_response(priv, command, cmd);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return ret;
+}
+
+int lbs_mesh_config_send(struct lbs_private *priv,
+			 struct cmd_ds_mesh_config *cmd,
+			 uint16_t action, uint16_t type)
+{
+	int ret;
+
+	if (!(priv->fwcapinfo & FW_CAPINFO_PERSISTENT_CONFIG))
+		return -EOPNOTSUPP;
+
+	ret = __lbs_mesh_config_send(priv, cmd, action, type);
+	return ret;
+}
+
+/* This function is the CMD_MESH_CONFIG legacy function.  It only handles the
+ * START and STOP actions.  The extended actions supported by CMD_MESH_CONFIG
+ * are all handled by preparing a struct cmd_ds_mesh_config and passing it to
+ * lbs_mesh_config_send.
+ */
+int lbs_mesh_config(struct lbs_private *priv, uint16_t action, uint16_t chan)
+{
+	struct cmd_ds_mesh_config cmd;
+	struct mrvl_meshie *ie;
+	DECLARE_SSID_BUF(ssid);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.channel = cpu_to_le16(chan);
+	ie = (struct mrvl_meshie *)cmd.data;
+
+	switch (action) {
+	case CMD_ACT_MESH_CONFIG_START:
+		ie->id = WLAN_EID_GENERIC;
+		ie->val.oui[0] = 0x00;
+		ie->val.oui[1] = 0x50;
+		ie->val.oui[2] = 0x43;
+		ie->val.type = MARVELL_MESH_IE_TYPE;
+		ie->val.subtype = MARVELL_MESH_IE_SUBTYPE;
+		ie->val.version = MARVELL_MESH_IE_VERSION;
+		ie->val.active_protocol_id = MARVELL_MESH_PROTO_ID_HWMP;
+		ie->val.active_metric_id = MARVELL_MESH_METRIC_ID;
+		ie->val.mesh_capability = MARVELL_MESH_CAPABILITY;
+		ie->val.mesh_id_len = priv->mesh_ssid_len;
+		memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
+		ie->len = sizeof(struct mrvl_meshie_val) -
+			IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len;
+		cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
+		break;
+	case CMD_ACT_MESH_CONFIG_STOP:
+		break;
+	default:
+		return -1;
+	}
+	lbs_deb_cmd("mesh config action %d type %x channel %d SSID %s\n",
+		    action, priv->mesh_tlv, chan,
+		    print_ssid(ssid, priv->mesh_ssid, priv->mesh_ssid_len));
+
+	return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
+}
+
+
+
+/***************************************************************************
+ * Persistent configuration support
+ */
+
+static int mesh_get_default_parameters(struct device *dev,
+				       struct mrvl_mesh_defaults *defs)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_config cmd;
+	int ret;
+
+	memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_GET,
+				   CMD_TYPE_MESH_GET_DEFAULTS);
+
+	if (ret)
+		return -EOPNOTSUPP;
+
+	memcpy(defs, &cmd.data[0], sizeof(struct mrvl_mesh_defaults));
+
+	return 0;
+}
+
+/**
+ * @brief Get function for sysfs attribute bootflag
+ */
+static ssize_t bootflag_get(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
+}
+
+/**
+ * @brief Set function for sysfs attribute bootflag
+ */
+static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_config cmd;
+	uint32_t datum;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 1))
+		return -EINVAL;
+
+	*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
+	cmd.length = cpu_to_le16(sizeof(uint32_t));
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_BOOTFLAG);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute boottime
+ */
+static ssize_t boottime_get(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 12, "%d\n", defs.boottime);
+}
+
+/**
+ * @brief Set function for sysfs attribute boottime
+ */
+static ssize_t boottime_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_config cmd;
+	uint32_t datum;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
+		return -EINVAL;
+
+	/* A too small boot time will result in the device booting into
+	 * standalone (no-host) mode before the host can take control of it,
+	 * so the change will be hard to revert.  This may be a desired
+	 * feature (e.g to configure a very fast boot time for devices that
+	 * will not be attached to a host), but dangerous.  So I'm enforcing a
+	 * lower limit of 20 seconds:  remove and recompile the driver if this
+	 * does not work for you.
+	 */
+	datum = (datum < 20) ? 20 : datum;
+	cmd.data[0] = datum;
+	cmd.length = cpu_to_le16(sizeof(uint8_t));
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_BOOTTIME);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute channel
+ */
+static ssize_t channel_get(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
+}
+
+/**
+ * @brief Set function for sysfs attribute channel
+ */
+static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	struct cmd_ds_mesh_config cmd;
+	uint32_t datum;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	ret = sscanf(buf, "%d", &datum);
+	if (ret != 1 || datum < 1 || datum > 11)
+		return -EINVAL;
+
+	*((__le16 *)&cmd.data[0]) = cpu_to_le16(datum);
+	cmd.length = cpu_to_le16(sizeof(uint16_t));
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_DEF_CHANNEL);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute mesh_id
+ */
+static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int maxlen;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
+		lbs_pr_err("inconsistent mesh ID length");
+		defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
+	}
+
+	/* SSID not null terminated: reserve room for \0 + \n */
+	maxlen = defs.meshie.val.mesh_id_len + 2;
+	maxlen = (PAGE_SIZE > maxlen) ? maxlen : PAGE_SIZE;
+
+	defs.meshie.val.mesh_id[defs.meshie.val.mesh_id_len] = '\0';
+
+	return snprintf(buf, maxlen, "%s\n", defs.meshie.val.mesh_id);
+}
+
+/**
+ * @brief Set function for sysfs attribute mesh_id
+ */
+static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct cmd_ds_mesh_config cmd;
+	struct mrvl_mesh_defaults defs;
+	struct mrvl_meshie *ie;
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	int len;
+	int ret;
+
+	if (count < 2 || count > IEEE80211_MAX_SSID_LEN + 1)
+		return -EINVAL;
+
+	memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
+	ie = (struct mrvl_meshie *) &cmd.data[0];
+
+	/* fetch all other Information Element parameters */
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
+
+	/* transfer IE elements */
+	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
+
+	len = count - 1;
+	memcpy(ie->val.mesh_id, buf, len);
+	/* SSID len */
+	ie->val.mesh_id_len = len;
+	/* IE len */
+	ie->len = sizeof(struct mrvl_meshie_val) - IEEE80211_MAX_SSID_LEN + len;
+
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_MESH_IE);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute protocol_id
+ */
+static ssize_t protocol_id_get(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 5, "%d\n", defs.meshie.val.active_protocol_id);
+}
+
+/**
+ * @brief Set function for sysfs attribute protocol_id
+ */
+static ssize_t protocol_id_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct cmd_ds_mesh_config cmd;
+	struct mrvl_mesh_defaults defs;
+	struct mrvl_meshie *ie;
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	uint32_t datum;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
+		return -EINVAL;
+
+	/* fetch all other Information Element parameters */
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
+
+	/* transfer IE elements */
+	ie = (struct mrvl_meshie *) &cmd.data[0];
+	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
+	/* update protocol id */
+	ie->val.active_protocol_id = datum;
+
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_MESH_IE);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute metric_id
+ */
+static ssize_t metric_id_get(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 5, "%d\n", defs.meshie.val.active_metric_id);
+}
+
+/**
+ * @brief Set function for sysfs attribute metric_id
+ */
+static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct cmd_ds_mesh_config cmd;
+	struct mrvl_mesh_defaults defs;
+	struct mrvl_meshie *ie;
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	uint32_t datum;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
+		return -EINVAL;
+
+	/* fetch all other Information Element parameters */
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
+
+	/* transfer IE elements */
+	ie = (struct mrvl_meshie *) &cmd.data[0];
+	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
+	/* update metric id */
+	ie->val.active_metric_id = datum;
+
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_MESH_IE);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+/**
+ * @brief Get function for sysfs attribute capability
+ */
+static ssize_t capability_get(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct mrvl_mesh_defaults defs;
+	int ret;
+
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	if (ret)
+		return ret;
+
+	return snprintf(buf, 5, "%d\n", defs.meshie.val.mesh_capability);
+}
+
+/**
+ * @brief Set function for sysfs attribute capability
+ */
+static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct cmd_ds_mesh_config cmd;
+	struct mrvl_mesh_defaults defs;
+	struct mrvl_meshie *ie;
+	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
+	uint32_t datum;
+	int ret;
+
+	memset(&cmd, 0, sizeof(cmd));
+	ret = sscanf(buf, "%d", &datum);
+	if ((ret != 1) || (datum > 255))
+		return -EINVAL;
+
+	/* fetch all other Information Element parameters */
+	ret = mesh_get_default_parameters(dev, &defs);
+
+	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
+
+	/* transfer IE elements */
+	ie = (struct mrvl_meshie *) &cmd.data[0];
+	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
+	/* update value */
+	ie->val.mesh_capability = datum;
+
+	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
+				   CMD_TYPE_MESH_SET_MESH_IE);
+	if (ret)
+		return ret;
+
+	return strlen(buf);
+}
+
+
+static DEVICE_ATTR(bootflag, 0644, bootflag_get, bootflag_set);
+static DEVICE_ATTR(boottime, 0644, boottime_get, boottime_set);
+static DEVICE_ATTR(channel, 0644, channel_get, channel_set);
+static DEVICE_ATTR(mesh_id, 0644, mesh_id_get, mesh_id_set);
+static DEVICE_ATTR(protocol_id, 0644, protocol_id_get, protocol_id_set);
+static DEVICE_ATTR(metric_id, 0644, metric_id_get, metric_id_set);
+static DEVICE_ATTR(capability, 0644, capability_get, capability_set);
+
+static struct attribute *boot_opts_attrs[] = {
+	&dev_attr_bootflag.attr,
+	&dev_attr_boottime.attr,
+	&dev_attr_channel.attr,
+	NULL
+};
+
+static struct attribute_group boot_opts_group = {
+	.name = "boot_options",
+	.attrs = boot_opts_attrs,
+};
+
+static struct attribute *mesh_ie_attrs[] = {
+	&dev_attr_mesh_id.attr,
+	&dev_attr_protocol_id.attr,
+	&dev_attr_metric_id.attr,
+	&dev_attr_capability.attr,
+	NULL
+};
+
+static struct attribute_group mesh_ie_group = {
+	.name = "mesh_ie",
+	.attrs = mesh_ie_attrs,
+};
+
+void lbs_persist_config_init(struct net_device *dev)
+{
+	int ret;
+	ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
+	ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
+}
+
+void lbs_persist_config_remove(struct net_device *dev)
+{
+	sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
+	sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
+}
+
+
+
+/***************************************************************************
+ * Ethtool related
+ */
+
+static const char *mesh_stat_strings[] = {
+			"drop_duplicate_bcast",
+			"drop_ttl_zero",
+			"drop_no_fwd_route",
+			"drop_no_buffers",
+			"fwded_unicast_cnt",
+			"fwded_bcast_cnt",
+			"drop_blind_table",
+			"tx_failed_cnt"
+};
+
+void lbs_mesh_ethtool_get_stats(struct net_device *dev,
+	struct ethtool_stats *stats, uint64_t *data)
+{
+	struct lbs_private *priv = dev->ml_priv;
+	struct cmd_ds_mesh_access mesh_access;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
+
+	/* Get Mesh Statistics */
+	ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
+
+	if (ret) {
+		memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
+		return;
+	}
+
+	priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
+	priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
+	priv->mstats.fwd_drop_noroute = le32_to_cpu(mesh_access.data[2]);
+	priv->mstats.fwd_drop_nobuf = le32_to_cpu(mesh_access.data[3]);
+	priv->mstats.fwd_unicast_cnt = le32_to_cpu(mesh_access.data[4]);
+	priv->mstats.fwd_bcast_cnt = le32_to_cpu(mesh_access.data[5]);
+	priv->mstats.drop_blind = le32_to_cpu(mesh_access.data[6]);
+	priv->mstats.tx_failed_cnt = le32_to_cpu(mesh_access.data[7]);
+
+	data[0] = priv->mstats.fwd_drop_rbt;
+	data[1] = priv->mstats.fwd_drop_ttl;
+	data[2] = priv->mstats.fwd_drop_noroute;
+	data[3] = priv->mstats.fwd_drop_nobuf;
+	data[4] = priv->mstats.fwd_unicast_cnt;
+	data[5] = priv->mstats.fwd_bcast_cnt;
+	data[6] = priv->mstats.drop_blind;
+	data[7] = priv->mstats.tx_failed_cnt;
+
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
+}
+
+int lbs_mesh_ethtool_get_sset_count(struct net_device *dev, int sset)
+{
+	struct lbs_private *priv = dev->ml_priv;
+
+	if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
+		return MESH_STATS_NUM;
+
+	return -EOPNOTSUPP;
+}
+
+void lbs_mesh_ethtool_get_strings(struct net_device *dev,
+	uint32_t stringset, uint8_t *s)
+{
+	int i;
+
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < MESH_STATS_NUM; i++) {
+			memcpy(s + i * ETH_GSTRING_LEN,
+					mesh_stat_strings[i],
+					ETH_GSTRING_LEN);
+		}
+		break;
+	}
+	lbs_deb_enter(LBS_DEB_ETHTOOL);
+}
diff --git a/drivers/net/wireless/libertas/mesh.h b/drivers/net/wireless/libertas/mesh.h
new file mode 100644
index 0000000..fea9b5d
--- /dev/null
+++ b/drivers/net/wireless/libertas/mesh.h
@@ -0,0 +1,78 @@
+/**
+  * Contains all definitions needed for the Libertas' MESH implementation.
+  */
+#ifndef _LBS_MESH_H_
+#define _LBS_MESH_H_
+
+
+#include <net/iw_handler.h>
+#include <net/lib80211.h>
+
+
+/* Mesh statistics */
+struct lbs_mesh_stats {
+	u32	fwd_bcast_cnt;		/* Fwd: Broadcast counter */
+	u32	fwd_unicast_cnt;	/* Fwd: Unicast counter */
+	u32	fwd_drop_ttl;		/* Fwd: TTL zero */
+	u32	fwd_drop_rbt;		/* Fwd: Recently Broadcasted */
+	u32	fwd_drop_noroute; 	/* Fwd: No route to Destination */
+	u32	fwd_drop_nobuf;		/* Fwd: Run out of internal buffers */
+	u32	drop_blind;		/* Rx:  Dropped by blinding table */
+	u32	tx_failed_cnt;		/* Tx:  Failed transmissions */
+};
+
+
+struct net_device;
+struct lbs_private;
+
+int lbs_init_mesh(struct lbs_private *priv);
+int lbs_deinit_mesh(struct lbs_private *priv);
+
+int lbs_add_mesh(struct lbs_private *priv);
+void lbs_remove_mesh(struct lbs_private *priv);
+
+
+/* Sending / Receiving */
+
+struct rxpd;
+struct txpd;
+
+struct net_device *lbs_mesh_set_dev(struct lbs_private *priv,
+	struct net_device *dev, struct rxpd *rxpd);
+void lbs_mesh_set_txpd(struct lbs_private *priv,
+	struct net_device *dev, struct txpd *txpd);
+
+
+/* Command handling */
+
+struct cmd_ds_command;
+
+int lbs_cmd_bt_access(struct cmd_ds_command *cmd,
+	u16 cmd_action, void *pdata_buf);
+int lbs_cmd_fwt_access(struct cmd_ds_command *cmd,
+	u16 cmd_action, void *pdata_buf);
+
+
+/* Persistent configuration */
+
+void lbs_persist_config_init(struct net_device *net);
+void lbs_persist_config_remove(struct net_device *net);
+
+
+/* WEXT handler */
+
+extern struct iw_handler_def mesh_handler_def;
+
+
+/* Ethtool statistics */
+
+struct ethtool_stats;
+
+void lbs_mesh_ethtool_get_stats(struct net_device *dev,
+	struct ethtool_stats *stats, uint64_t *data);
+int lbs_mesh_ethtool_get_sset_count(struct net_device *dev, int sset);
+void lbs_mesh_ethtool_get_strings(struct net_device *dev,
+	uint32_t stringset, uint8_t *s);
+
+
+#endif
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
deleted file mode 100644
index 18fe29f..0000000
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ /dev/null
@@ -1,453 +0,0 @@
-#include <linux/moduleparam.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/kthread.h>
-#include <linux/kfifo.h>
-
-#include "host.h"
-#include "decl.h"
-#include "dev.h"
-#include "wext.h"
-#include "debugfs.h"
-#include "scan.h"
-#include "assoc.h"
-#include "cmd.h"
-
-static int mesh_get_default_parameters(struct device *dev,
-				       struct mrvl_mesh_defaults *defs)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_config cmd;
-	int ret;
-
-	memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_GET,
-				   CMD_TYPE_MESH_GET_DEFAULTS);
-
-	if (ret)
-		return -EOPNOTSUPP;
-
-	memcpy(defs, &cmd.data[0], sizeof(struct mrvl_mesh_defaults));
-
-	return 0;
-}
-
-/**
- * @brief Get function for sysfs attribute bootflag
- */
-static ssize_t bootflag_get(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag));
-}
-
-/**
- * @brief Set function for sysfs attribute bootflag
- */
-static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr,
-			    const char *buf, size_t count)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_config cmd;
-	uint32_t datum;
-	int ret;
-
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 1))
-		return -EINVAL;
-
-	*((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum);
-	cmd.length = cpu_to_le16(sizeof(uint32_t));
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_BOOTFLAG);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute boottime
- */
-static ssize_t boottime_get(struct device *dev,
-			    struct device_attribute *attr, char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 12, "%d\n", defs.boottime);
-}
-
-/**
- * @brief Set function for sysfs attribute boottime
- */
-static ssize_t boottime_set(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_config cmd;
-	uint32_t datum;
-	int ret;
-
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 255))
-		return -EINVAL;
-
-	/* A too small boot time will result in the device booting into
-	 * standalone (no-host) mode before the host can take control of it,
-	 * so the change will be hard to revert.  This may be a desired
-	 * feature (e.g to configure a very fast boot time for devices that
-	 * will not be attached to a host), but dangerous.  So I'm enforcing a
-	 * lower limit of 20 seconds:  remove and recompile the driver if this
-	 * does not work for you.
-	 */
-	datum = (datum < 20) ? 20 : datum;
-	cmd.data[0] = datum;
-	cmd.length = cpu_to_le16(sizeof(uint8_t));
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_BOOTTIME);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute channel
- */
-static ssize_t channel_get(struct device *dev,
-			   struct device_attribute *attr, char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel));
-}
-
-/**
- * @brief Set function for sysfs attribute channel
- */
-static ssize_t channel_set(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	struct cmd_ds_mesh_config cmd;
-	uint32_t datum;
-	int ret;
-
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if (ret != 1 || datum < 1 || datum > 11)
-		return -EINVAL;
-
-	*((__le16 *)&cmd.data[0]) = cpu_to_le16(datum);
-	cmd.length = cpu_to_le16(sizeof(uint16_t));
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_DEF_CHANNEL);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute mesh_id
- */
-static ssize_t mesh_id_get(struct device *dev, struct device_attribute *attr,
-			   char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int maxlen;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	if (defs.meshie.val.mesh_id_len > IW_ESSID_MAX_SIZE) {
-		lbs_pr_err("inconsistent mesh ID length");
-		defs.meshie.val.mesh_id_len = IW_ESSID_MAX_SIZE;
-	}
-
-	/* SSID not null terminated: reserve room for \0 + \n */
-	maxlen = defs.meshie.val.mesh_id_len + 2;
-	maxlen = (PAGE_SIZE > maxlen) ? maxlen : PAGE_SIZE;
-
-	defs.meshie.val.mesh_id[defs.meshie.val.mesh_id_len] = '\0';
-
-	return snprintf(buf, maxlen, "%s\n", defs.meshie.val.mesh_id);
-}
-
-/**
- * @brief Set function for sysfs attribute mesh_id
- */
-static ssize_t mesh_id_set(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	struct cmd_ds_mesh_config cmd;
-	struct mrvl_mesh_defaults defs;
-	struct mrvl_meshie *ie;
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	int len;
-	int ret;
-
-	if (count < 2 || count > IW_ESSID_MAX_SIZE + 1)
-		return -EINVAL;
-
-	memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
-	ie = (struct mrvl_meshie *) &cmd.data[0];
-
-	/* fetch all other Information Element parameters */
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
-
-	/* transfer IE elements */
-	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
-
-	len = count - 1;
-	memcpy(ie->val.mesh_id, buf, len);
-	/* SSID len */
-	ie->val.mesh_id_len = len;
-	/* IE len */
-	ie->len = sizeof(struct mrvl_meshie_val) - IW_ESSID_MAX_SIZE + len;
-
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_MESH_IE);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute protocol_id
- */
-static ssize_t protocol_id_get(struct device *dev,
-			       struct device_attribute *attr, char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 5, "%d\n", defs.meshie.val.active_protocol_id);
-}
-
-/**
- * @brief Set function for sysfs attribute protocol_id
- */
-static ssize_t protocol_id_set(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct cmd_ds_mesh_config cmd;
-	struct mrvl_mesh_defaults defs;
-	struct mrvl_meshie *ie;
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	uint32_t datum;
-	int ret;
-
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 255))
-		return -EINVAL;
-
-	/* fetch all other Information Element parameters */
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
-
-	/* transfer IE elements */
-	ie = (struct mrvl_meshie *) &cmd.data[0];
-	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
-	/* update protocol id */
-	ie->val.active_protocol_id = datum;
-
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_MESH_IE);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute metric_id
- */
-static ssize_t metric_id_get(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 5, "%d\n", defs.meshie.val.active_metric_id);
-}
-
-/**
- * @brief Set function for sysfs attribute metric_id
- */
-static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr,
-			     const char *buf, size_t count)
-{
-	struct cmd_ds_mesh_config cmd;
-	struct mrvl_mesh_defaults defs;
-	struct mrvl_meshie *ie;
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	uint32_t datum;
-	int ret;
-
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 255))
-		return -EINVAL;
-
-	/* fetch all other Information Element parameters */
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
-
-	/* transfer IE elements */
-	ie = (struct mrvl_meshie *) &cmd.data[0];
-	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
-	/* update metric id */
-	ie->val.active_metric_id = datum;
-
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_MESH_IE);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-/**
- * @brief Get function for sysfs attribute capability
- */
-static ssize_t capability_get(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct mrvl_mesh_defaults defs;
-	int ret;
-
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	if (ret)
-		return ret;
-
-	return snprintf(buf, 5, "%d\n", defs.meshie.val.mesh_capability);
-}
-
-/**
- * @brief Set function for sysfs attribute capability
- */
-static ssize_t capability_set(struct device *dev, struct device_attribute *attr,
-			      const char *buf, size_t count)
-{
-	struct cmd_ds_mesh_config cmd;
-	struct mrvl_mesh_defaults defs;
-	struct mrvl_meshie *ie;
-	struct lbs_private *priv = to_net_dev(dev)->ml_priv;
-	uint32_t datum;
-	int ret;
-
-	memset(&cmd, 0, sizeof(cmd));
-	ret = sscanf(buf, "%d", &datum);
-	if ((ret != 1) || (datum > 255))
-		return -EINVAL;
-
-	/* fetch all other Information Element parameters */
-	ret = mesh_get_default_parameters(dev, &defs);
-
-	cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie));
-
-	/* transfer IE elements */
-	ie = (struct mrvl_meshie *) &cmd.data[0];
-	memcpy(ie, &defs.meshie, sizeof(struct mrvl_meshie));
-	/* update value */
-	ie->val.mesh_capability = datum;
-
-	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
-				   CMD_TYPE_MESH_SET_MESH_IE);
-	if (ret)
-		return ret;
-
-	return strlen(buf);
-}
-
-
-static DEVICE_ATTR(bootflag, 0644, bootflag_get, bootflag_set);
-static DEVICE_ATTR(boottime, 0644, boottime_get, boottime_set);
-static DEVICE_ATTR(channel, 0644, channel_get, channel_set);
-static DEVICE_ATTR(mesh_id, 0644, mesh_id_get, mesh_id_set);
-static DEVICE_ATTR(protocol_id, 0644, protocol_id_get, protocol_id_set);
-static DEVICE_ATTR(metric_id, 0644, metric_id_get, metric_id_set);
-static DEVICE_ATTR(capability, 0644, capability_get, capability_set);
-
-static struct attribute *boot_opts_attrs[] = {
-	&dev_attr_bootflag.attr,
-	&dev_attr_boottime.attr,
-	&dev_attr_channel.attr,
-	NULL
-};
-
-static struct attribute_group boot_opts_group = {
-	.name = "boot_options",
-	.attrs = boot_opts_attrs,
-};
-
-static struct attribute *mesh_ie_attrs[] = {
-	&dev_attr_mesh_id.attr,
-	&dev_attr_protocol_id.attr,
-	&dev_attr_metric_id.attr,
-	&dev_attr_capability.attr,
-	NULL
-};
-
-static struct attribute_group mesh_ie_group = {
-	.name = "mesh_ie",
-	.attrs = mesh_ie_attrs,
-};
-
-void lbs_persist_config_init(struct net_device *dev)
-{
-	int ret;
-	ret = sysfs_create_group(&(dev->dev.kobj), &boot_opts_group);
-	ret = sysfs_create_group(&(dev->dev.kobj), &mesh_ie_group);
-}
-
-void lbs_persist_config_remove(struct net_device *dev)
-{
-	sysfs_remove_group(&(dev->dev.kobj), &boot_opts_group);
-	sysfs_remove_group(&(dev->dev.kobj), &mesh_ie_group);
-}
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 65f02cc..2daf8ff 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -4,7 +4,7 @@
 #include <linux/etherdevice.h>
 #include <linux/types.h>
 
-#include "hostcmd.h"
+#include "host.h"
 #include "radiotap.h"
 #include "decl.h"
 #include "dev.h"
@@ -160,15 +160,8 @@
 	p_rx_pd = (struct rxpd *) skb->data;
 	p_rx_pkt = (struct rxpackethdr *) ((u8 *)p_rx_pd +
 		le32_to_cpu(p_rx_pd->pkt_ptr));
-	if (priv->mesh_dev) {
-		if (priv->mesh_fw_ver == MESH_FW_OLD) {
-			if (p_rx_pd->rx_control & RxPD_MESH_FRAME)
-				dev = priv->mesh_dev;
-		} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
-			if (p_rx_pd->u.bss.bss_num == MESH_IFACE_ID)
-				dev = priv->mesh_dev;
-		}
-	}
+
+	dev = lbs_mesh_set_dev(priv, dev, p_rx_pd);
 
 	lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
 		 min_t(unsigned int, skb->len, 100));
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 6c95af3..c6a6c04 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -12,18 +12,19 @@
 #include <net/lib80211.h>
 
 #include "host.h"
-#include "decl.h"
 #include "dev.h"
 #include "scan.h"
+#include "assoc.h"
+#include "wext.h"
 #include "cmd.h"
 
 //! Approximate amount of data needed to pass a scan result back to iwlist
 #define MAX_SCAN_CELL_SIZE  (IW_EV_ADDR_LEN             \
-                             + IW_ESSID_MAX_SIZE        \
+                             + IEEE80211_MAX_SSID_LEN   \
                              + IW_EV_UINT_LEN           \
                              + IW_EV_FREQ_LEN           \
                              + IW_EV_QUAL_LEN           \
-                             + IW_ESSID_MAX_SIZE        \
+                             + IEEE80211_MAX_SSID_LEN   \
                              + IW_EV_PARAM_LEN          \
                              + 40)	/* 40 for WPAIE */
 
@@ -121,6 +122,189 @@
 
 
 
+/*********************************************************************/
+/*                                                                   */
+/* Region channel support                                            */
+/*                                                                   */
+/*********************************************************************/
+
+#define LBS_TX_PWR_DEFAULT		20	/*100mW */
+#define LBS_TX_PWR_US_DEFAULT		20	/*100mW */
+#define LBS_TX_PWR_JP_DEFAULT		16	/*50mW */
+#define LBS_TX_PWR_FR_DEFAULT		20	/*100mW */
+#define LBS_TX_PWR_EMEA_DEFAULT	20	/*100mW */
+
+/* Format { channel, frequency (MHz), maxtxpower } */
+/* band: 'B/G', region: USA FCC/Canada IC */
+static struct chan_freq_power channel_freq_power_US_BG[] = {
+	{1, 2412, LBS_TX_PWR_US_DEFAULT},
+	{2, 2417, LBS_TX_PWR_US_DEFAULT},
+	{3, 2422, LBS_TX_PWR_US_DEFAULT},
+	{4, 2427, LBS_TX_PWR_US_DEFAULT},
+	{5, 2432, LBS_TX_PWR_US_DEFAULT},
+	{6, 2437, LBS_TX_PWR_US_DEFAULT},
+	{7, 2442, LBS_TX_PWR_US_DEFAULT},
+	{8, 2447, LBS_TX_PWR_US_DEFAULT},
+	{9, 2452, LBS_TX_PWR_US_DEFAULT},
+	{10, 2457, LBS_TX_PWR_US_DEFAULT},
+	{11, 2462, LBS_TX_PWR_US_DEFAULT}
+};
+
+/* band: 'B/G', region: Europe ETSI */
+static struct chan_freq_power channel_freq_power_EU_BG[] = {
+	{1, 2412, LBS_TX_PWR_EMEA_DEFAULT},
+	{2, 2417, LBS_TX_PWR_EMEA_DEFAULT},
+	{3, 2422, LBS_TX_PWR_EMEA_DEFAULT},
+	{4, 2427, LBS_TX_PWR_EMEA_DEFAULT},
+	{5, 2432, LBS_TX_PWR_EMEA_DEFAULT},
+	{6, 2437, LBS_TX_PWR_EMEA_DEFAULT},
+	{7, 2442, LBS_TX_PWR_EMEA_DEFAULT},
+	{8, 2447, LBS_TX_PWR_EMEA_DEFAULT},
+	{9, 2452, LBS_TX_PWR_EMEA_DEFAULT},
+	{10, 2457, LBS_TX_PWR_EMEA_DEFAULT},
+	{11, 2462, LBS_TX_PWR_EMEA_DEFAULT},
+	{12, 2467, LBS_TX_PWR_EMEA_DEFAULT},
+	{13, 2472, LBS_TX_PWR_EMEA_DEFAULT}
+};
+
+/* band: 'B/G', region: Spain */
+static struct chan_freq_power channel_freq_power_SPN_BG[] = {
+	{10, 2457, LBS_TX_PWR_DEFAULT},
+	{11, 2462, LBS_TX_PWR_DEFAULT}
+};
+
+/* band: 'B/G', region: France */
+static struct chan_freq_power channel_freq_power_FR_BG[] = {
+	{10, 2457, LBS_TX_PWR_FR_DEFAULT},
+	{11, 2462, LBS_TX_PWR_FR_DEFAULT},
+	{12, 2467, LBS_TX_PWR_FR_DEFAULT},
+	{13, 2472, LBS_TX_PWR_FR_DEFAULT}
+};
+
+/* band: 'B/G', region: Japan */
+static struct chan_freq_power channel_freq_power_JPN_BG[] = {
+	{1, 2412, LBS_TX_PWR_JP_DEFAULT},
+	{2, 2417, LBS_TX_PWR_JP_DEFAULT},
+	{3, 2422, LBS_TX_PWR_JP_DEFAULT},
+	{4, 2427, LBS_TX_PWR_JP_DEFAULT},
+	{5, 2432, LBS_TX_PWR_JP_DEFAULT},
+	{6, 2437, LBS_TX_PWR_JP_DEFAULT},
+	{7, 2442, LBS_TX_PWR_JP_DEFAULT},
+	{8, 2447, LBS_TX_PWR_JP_DEFAULT},
+	{9, 2452, LBS_TX_PWR_JP_DEFAULT},
+	{10, 2457, LBS_TX_PWR_JP_DEFAULT},
+	{11, 2462, LBS_TX_PWR_JP_DEFAULT},
+	{12, 2467, LBS_TX_PWR_JP_DEFAULT},
+	{13, 2472, LBS_TX_PWR_JP_DEFAULT},
+	{14, 2484, LBS_TX_PWR_JP_DEFAULT}
+};
+
+/**
+ * the structure for channel, frequency and power
+ */
+struct region_cfp_table {
+	u8 region;
+	struct chan_freq_power *cfp_BG;
+	int cfp_no_BG;
+};
+
+/**
+ * the structure for the mapping between region and CFP
+ */
+static struct region_cfp_table region_cfp_table[] = {
+	{0x10,			/*US FCC */
+	 channel_freq_power_US_BG,
+	 ARRAY_SIZE(channel_freq_power_US_BG),
+	 }
+	,
+	{0x20,			/*CANADA IC */
+	 channel_freq_power_US_BG,
+	 ARRAY_SIZE(channel_freq_power_US_BG),
+	 }
+	,
+	{0x30, /*EU*/ channel_freq_power_EU_BG,
+	 ARRAY_SIZE(channel_freq_power_EU_BG),
+	 }
+	,
+	{0x31, /*SPAIN*/ channel_freq_power_SPN_BG,
+	 ARRAY_SIZE(channel_freq_power_SPN_BG),
+	 }
+	,
+	{0x32, /*FRANCE*/ channel_freq_power_FR_BG,
+	 ARRAY_SIZE(channel_freq_power_FR_BG),
+	 }
+	,
+	{0x40, /*JAPAN*/ channel_freq_power_JPN_BG,
+	 ARRAY_SIZE(channel_freq_power_JPN_BG),
+	 }
+	,
+/*Add new region here */
+};
+
+/**
+ *  @brief This function finds the CFP in
+ *  region_cfp_table based on region and band parameter.
+ *
+ *  @param region  The region code
+ *  @param band	   The band
+ *  @param cfp_no  A pointer to CFP number
+ *  @return 	   A pointer to CFP
+ */
+static struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no)
+{
+	int i, end;
+
+	lbs_deb_enter(LBS_DEB_MAIN);
+
+	end = ARRAY_SIZE(region_cfp_table);
+
+	for (i = 0; i < end ; i++) {
+		lbs_deb_main("region_cfp_table[i].region=%d\n",
+			region_cfp_table[i].region);
+		if (region_cfp_table[i].region == region) {
+			*cfp_no = region_cfp_table[i].cfp_no_BG;
+			lbs_deb_leave(LBS_DEB_MAIN);
+			return region_cfp_table[i].cfp_BG;
+		}
+	}
+
+	lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL");
+	return NULL;
+}
+
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band)
+{
+	int ret = 0;
+	int i = 0;
+
+	struct chan_freq_power *cfp;
+	int cfp_no;
+
+	lbs_deb_enter(LBS_DEB_MAIN);
+
+	memset(priv->region_channel, 0, sizeof(priv->region_channel));
+
+	cfp = lbs_get_region_cfp_table(region, &cfp_no);
+	if (cfp != NULL) {
+		priv->region_channel[i].nrcfp = cfp_no;
+		priv->region_channel[i].CFP = cfp;
+	} else {
+		lbs_deb_main("wrong region code %#x in band B/G\n",
+		       region);
+		ret = -1;
+		goto out;
+	}
+	priv->region_channel[i].valid = 1;
+	priv->region_channel[i].region = region;
+	priv->region_channel[i].band = band;
+	i++;
+out:
+	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
+	return ret;
+}
+
+
+
 
 /*********************************************************************/
 /*                                                                   */
@@ -161,31 +345,15 @@
 	scantype = CMD_SCAN_TYPE_ACTIVE;
 
 	for (rgnidx = 0; rgnidx < ARRAY_SIZE(priv->region_channel); rgnidx++) {
-		if (priv->enable11d && (priv->connect_status != LBS_CONNECTED)
-		    && (priv->mesh_connect_status != LBS_CONNECTED)) {
-			/* Scan all the supported chan for the first scan */
-			if (!priv->universal_channel[rgnidx].valid)
-				continue;
-			scanregion = &priv->universal_channel[rgnidx];
-
-			/* clear the parsed_region_chan for the first scan */
-			memset(&priv->parsed_region_chan, 0x00,
-			       sizeof(priv->parsed_region_chan));
-		} else {
-			if (!priv->region_channel[rgnidx].valid)
-				continue;
-			scanregion = &priv->region_channel[rgnidx];
-		}
+		if (!priv->region_channel[rgnidx].valid)
+			continue;
+		scanregion = &priv->region_channel[rgnidx];
 
 		for (nextchan = 0; nextchan < scanregion->nrcfp; nextchan++, chanidx++) {
 			struct chanscanparamset *chan = &scanchanlist[chanidx];
 
 			cfp = scanregion->CFP + nextchan;
 
-			if (priv->enable11d)
-				scantype = lbs_get_scan_type_11d(cfp->channel,
-								 &priv->parsed_region_chan);
-
 			if (scanregion->band == BAND_B || scanregion->band == BAND_G)
 				chan->radiotype = CMD_SCAN_RADIO_TYPE_BG;
 
@@ -519,7 +687,6 @@
 	struct ieee_ie_cf_param_set *cf;
 	struct ieee_ie_ibss_param_set *ibss;
 	DECLARE_SSID_BUF(ssid);
-	struct ieee_ie_country_info_set *pcountryinfo;
 	uint8_t *pos, *end, *p;
 	uint8_t n_ex_rates = 0, got_basic_rates = 0, n_basic_rates = 0;
 	uint16_t beaconsize = 0;
@@ -642,26 +809,6 @@
 			lbs_deb_scan("got IBSS IE\n");
 			break;
 
-		case WLAN_EID_COUNTRY:
-			pcountryinfo = (struct ieee_ie_country_info_set *) pos;
-			lbs_deb_scan("got COUNTRY IE\n");
-			if (pcountryinfo->header.len < sizeof(pcountryinfo->countrycode)
-			    || pcountryinfo->header.len > 254) {
-				lbs_deb_scan("%s: 11D- Err CountryInfo len %d, min %zd, max 254\n",
-					     __func__,
-					     pcountryinfo->header.len,
-					     sizeof(pcountryinfo->countrycode));
-				ret = -1;
-				goto done;
-			}
-
-			memcpy(&bss->countryinfo, pcountryinfo,
-				pcountryinfo->header.len + 2);
-			lbs_deb_hex(LBS_DEB_SCAN, "process_bss: 11d countryinfo",
-				    (uint8_t *) pcountryinfo,
-				    (int) (pcountryinfo->header.len + 2));
-			break;
-
 		case WLAN_EID_EXT_SUPP_RATES:
 			/* only process extended supported rate if data rate is
 			 * already found. Data rate IE should come before
@@ -812,7 +959,7 @@
 	/* SSID */
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.flags = 1;
-	iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IW_ESSID_MAX_SIZE);
+	iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IEEE80211_MAX_SSID_LEN);
 	start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid);
 
 	/* Mode */
@@ -1022,9 +1169,12 @@
 		return -EAGAIN;
 
 	/* Update RSSI if current BSS is a locally created ad-hoc BSS */
-	if ((priv->mode == IW_MODE_ADHOC) && priv->adhoccreate)
-		lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
-					     CMD_OPTION_WAITFORRSP, 0, NULL);
+	if ((priv->mode == IW_MODE_ADHOC) && priv->adhoccreate) {
+		err = lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
+				CMD_OPTION_WAITFORRSP, 0, NULL);
+		if (err)
+			goto out;
+	}
 
 	mutex_lock(&priv->lock);
 	list_for_each_entry_safe (iter_bss, safe, &priv->network_list, list) {
@@ -1058,7 +1208,7 @@
 
 	dwrq->length = (ev - extra);
 	dwrq->flags = 0;
-
+out:
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", err);
 	return err;
 }
@@ -1141,11 +1291,11 @@
 	/* The size of the TLV buffer is equal to the entire command response
 	 *   size (scanrespsize) minus the fixed fields (sizeof()'s), the
 	 *   BSS Descriptions (bssdescriptsize as bytesLef) and the command
-	 *   response header (S_DS_GEN)
+	 *   response header (sizeof(struct cmd_header))
 	 */
 	tlvbufsize = scanrespsize - (bytesleft + sizeof(scanresp->bssdescriptsize)
 				     + sizeof(scanresp->nr_sets)
-				     + S_DS_GEN);
+				     + sizeof(struct cmd_header));
 
 	/*
 	 *  Process each scan response returned (scanresp->nr_sets). Save
diff --git a/drivers/net/wireless/libertas/scan.h b/drivers/net/wireless/libertas/scan.h
index fab7d5d..8fb1706 100644
--- a/drivers/net/wireless/libertas/scan.h
+++ b/drivers/net/wireless/libertas/scan.h
@@ -9,8 +9,36 @@
 
 #include <net/iw_handler.h>
 
+struct lbs_private;
+
 #define MAX_NETWORK_COUNT 128
 
+/** Chan-freq-TxPower mapping table*/
+struct chan_freq_power {
+	/** channel Number		*/
+	u16 channel;
+	/** frequency of this channel	*/
+	u32 freq;
+	/** Max allowed Tx power level	*/
+	u16 maxtxpower;
+	/** TRUE:channel unsupported;  FLASE:supported*/
+	u8 unsupported;
+};
+
+/** region-band mapping table*/
+struct region_channel {
+	/** TRUE if this entry is valid		     */
+	u8 valid;
+	/** region code for US, Japan ...	     */
+	u8 region;
+	/** band B/G/A, used for BAND_CONFIG cmd	     */
+	u8 band;
+	/** Actual No. of elements in the array below */
+	u8 nrcfp;
+	/** chan-freq-txpower mapping table*/
+	struct chan_freq_power *CFP;
+};
+
 /**
  *  @brief Maximum number of channels that can be sent in a setuserscan ioctl
  */
@@ -18,6 +46,8 @@
 
 int lbs_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len);
 
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
+
 int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid,
 				u8 ssid_len);
 
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 8c3766a6..315d1ce 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -5,7 +5,7 @@
 #include <linux/etherdevice.h>
 #include <linux/sched.h>
 
-#include "hostcmd.h"
+#include "host.h"
 #include "radiotap.h"
 #include "decl.h"
 #include "defs.h"
@@ -131,12 +131,7 @@
 	txpd->tx_packet_length = cpu_to_le16(pkt_len);
 	txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd));
 
-	if (dev == priv->mesh_dev) {
-		if (priv->mesh_fw_ver == MESH_FW_OLD)
-			txpd->tx_control |= cpu_to_le32(TxPD_MESH_FRAME);
-		else if (priv->mesh_fw_ver == MESH_FW_NEW)
-			txpd->u.bss.bss_num = MESH_IFACE_ID;
-	}
+	lbs_mesh_set_txpd(priv, dev, txpd);
 
 	lbs_deb_hex(LBS_DEB_TX, "txpd", (u8 *) &txpd, sizeof(struct txpd));
 
diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h
index 99905df..3e72c86 100644
--- a/drivers/net/wireless/libertas/types.h
+++ b/drivers/net/wireless/libertas/types.h
@@ -5,8 +5,8 @@
 #define _LBS_TYPES_H_
 
 #include <linux/if_ether.h>
+#include <linux/ieee80211.h>
 #include <asm/byteorder.h>
-#include <linux/wireless.h>
 
 struct ieee_ie_header {
 	u8 id;
@@ -247,7 +247,7 @@
 	uint8_t active_metric_id;
 	uint8_t mesh_capability;
 	uint8_t mesh_id_len;
-	uint8_t mesh_id[IW_ESSID_MAX_SIZE];
+	uint8_t mesh_id[IEEE80211_MAX_SSID_LEN];
 } __attribute__ ((packed));
 
 struct mrvl_meshie {
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index be837a0d25..a8eb9e1 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -45,6 +45,63 @@
 	priv->pending_assoc_req = NULL;
 }
 
+void lbs_send_disconnect_notification(struct lbs_private *priv)
+{
+	union iwreq_data wrqu;
+
+	memset(wrqu.ap_addr.sa_data, 0x00, ETH_ALEN);
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+static void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str)
+{
+	union iwreq_data iwrq;
+	u8 buf[50];
+
+	lbs_deb_enter(LBS_DEB_WEXT);
+
+	memset(&iwrq, 0, sizeof(union iwreq_data));
+	memset(buf, 0, sizeof(buf));
+
+	snprintf(buf, sizeof(buf) - 1, "%s", str);
+
+	iwrq.data.length = strlen(buf) + 1 + IW_EV_LCP_LEN;
+
+	/* Send Event to upper layer */
+	lbs_deb_wext("event indication string %s\n", (char *)buf);
+	lbs_deb_wext("event indication length %d\n", iwrq.data.length);
+	lbs_deb_wext("sending wireless event IWEVCUSTOM for %s\n", str);
+
+	wireless_send_event(priv->dev, IWEVCUSTOM, &iwrq, buf);
+
+	lbs_deb_leave(LBS_DEB_WEXT);
+}
+
+/**
+ *  @brief This function handles MIC failure event.
+ *
+ *  @param priv    A pointer to struct lbs_private structure
+ *  @para  event   the event id
+ *  @return 	   n/a
+ */
+void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event)
+{
+	char buf[50];
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	memset(buf, 0, sizeof(buf));
+
+	sprintf(buf, "%s", "MLME-MICHAELMICFAILURE.indication ");
+
+	if (event == MACREG_INT_CODE_MIC_ERR_UNICAST)
+		strcat(buf, "unicast ");
+	else
+		strcat(buf, "multicast ");
+
+	lbs_send_iwevcustom_event(priv, buf);
+	lbs_deb_leave(LBS_DEB_CMD);
+}
 
 /**
  *  @brief Find the channel frequency power info with specific channel
@@ -66,8 +123,6 @@
 	for (j = 0; !cfp && (j < ARRAY_SIZE(priv->region_channel)); j++) {
 		rc = &priv->region_channel[j];
 
-		if (priv->enable11d)
-			rc = &priv->universal_channel[j];
 		if (!rc->valid || !rc->CFP)
 			continue;
 		if (rc->band != band)
@@ -107,8 +162,6 @@
 	for (j = 0; !cfp && (j < ARRAY_SIZE(priv->region_channel)); j++) {
 		rc = &priv->region_channel[j];
 
-		if (priv->enable11d)
-			rc = &priv->universal_channel[j];
 		if (!rc->valid || !rc->CFP)
 			continue;
 		if (rc->band != band)
@@ -169,12 +222,12 @@
 	lbs_deb_enter(LBS_DEB_WEXT);
 
 	cfp = lbs_find_cfp_by_band_and_channel(priv, 0,
-					   priv->curbssparams.channel);
+					   priv->channel);
 
 	if (!cfp) {
-		if (priv->curbssparams.channel)
+		if (priv->channel)
 			lbs_deb_wext("invalid channel %d\n",
-			       priv->curbssparams.channel);
+			       priv->channel);
 		return -EINVAL;
 	}
 
@@ -547,8 +600,6 @@
 	struct chan_freq_power *cfp;
 	u8 rates[MAX_RATES + 1];
 
-	u8 flag = 0;
-
 	lbs_deb_enter(LBS_DEB_WEXT);
 
 	dwrq->length = sizeof(struct iw_range);
@@ -570,52 +621,21 @@
 
 	range->scan_capa = IW_SCAN_CAPA_ESSID;
 
-	if (priv->enable11d &&
-	    (priv->connect_status == LBS_CONNECTED ||
-	    priv->mesh_connect_status == LBS_CONNECTED)) {
-		u8 chan_no;
-		u8 band;
-
-		struct parsed_region_chan_11d *parsed_region_chan =
-		    &priv->parsed_region_chan;
-
-		if (parsed_region_chan == NULL) {
-			lbs_deb_wext("11d: parsed_region_chan is NULL\n");
-			goto out;
-		}
-		band = parsed_region_chan->band;
-		lbs_deb_wext("band %d, nr_char %d\n", band,
-		       parsed_region_chan->nr_chan);
-
+	for (j = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
+	     && (j < ARRAY_SIZE(priv->region_channel)); j++) {
+		cfp = priv->region_channel[j].CFP;
 		for (i = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
-		     && (i < parsed_region_chan->nr_chan); i++) {
-			chan_no = parsed_region_chan->chanpwr[i].chan;
-			lbs_deb_wext("chan_no %d\n", chan_no);
-			range->freq[range->num_frequency].i = (long)chan_no;
+		     && priv->region_channel[j].valid
+		     && cfp
+		     && (i < priv->region_channel[j].nrcfp); i++) {
+			range->freq[range->num_frequency].i =
+			    (long)cfp->channel;
 			range->freq[range->num_frequency].m =
-			    (long)lbs_chan_2_freq(chan_no) * 100000;
+			    (long)cfp->freq * 100000;
 			range->freq[range->num_frequency].e = 1;
+			cfp++;
 			range->num_frequency++;
 		}
-		flag = 1;
-	}
-	if (!flag) {
-		for (j = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
-		     && (j < ARRAY_SIZE(priv->region_channel)); j++) {
-			cfp = priv->region_channel[j].CFP;
-			for (i = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
-			     && priv->region_channel[j].valid
-			     && cfp
-			     && (i < priv->region_channel[j].nrcfp); i++) {
-				range->freq[range->num_frequency].i =
-				    (long)cfp->channel;
-				range->freq[range->num_frequency].m =
-				    (long)cfp->freq * 100000;
-				range->freq[range->num_frequency].e = 1;
-				cfp++;
-				range->num_frequency++;
-			}
-		}
 	}
 
 	lbs_deb_wext("IW_MAX_FREQUENCIES %d, num_frequency %d\n",
@@ -700,7 +720,6 @@
 		                  | IW_ENC_CAPA_CIPHER_CCMP;
 	}
 
-out:
 	lbs_deb_leave(LBS_DEB_WEXT);
 	return 0;
 }
@@ -709,6 +728,7 @@
 			  struct iw_param *vwrq, char *extra)
 {
 	struct lbs_private *priv = dev->ml_priv;
+	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -737,8 +757,54 @@
 		       "setting power timeout is not supported\n");
 		return -EINVAL;
 	} else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
-		lbs_deb_wext("setting power period not supported\n");
-		return -EINVAL;
+		vwrq->value = vwrq->value / 1000;
+		if (!priv->enter_deep_sleep) {
+			lbs_pr_err("deep sleep feature is not implemented "
+					"for this interface driver\n");
+			return -EINVAL;
+		}
+
+		if (priv->connect_status == LBS_CONNECTED) {
+			if ((priv->is_auto_deep_sleep_enabled) &&
+						(vwrq->value == -1000)) {
+				lbs_exit_auto_deep_sleep(priv);
+				return 0;
+			} else {
+				lbs_pr_err("can't use deep sleep cmd in "
+						"connected state\n");
+				return -EINVAL;
+			}
+		}
+
+		if ((vwrq->value < 0) && (vwrq->value != -1000)) {
+			lbs_pr_err("unknown option\n");
+			return -EINVAL;
+		}
+
+		if (vwrq->value > 0) {
+			if (!priv->is_auto_deep_sleep_enabled) {
+				priv->is_activity_detected = 0;
+				priv->auto_deep_sleep_timeout = vwrq->value;
+				lbs_enter_auto_deep_sleep(priv);
+			} else {
+				priv->auto_deep_sleep_timeout = vwrq->value;
+				lbs_deb_debugfs("auto deep sleep: "
+						"already enabled\n");
+			}
+			return 0;
+		} else {
+			if (priv->is_auto_deep_sleep_enabled) {
+				lbs_exit_auto_deep_sleep(priv);
+				/* Try to exit deep sleep if auto */
+				/*deep sleep disabled */
+				ret = lbs_set_deep_sleep(priv, 0);
+			}
+			if (vwrq->value == 0)
+				ret = lbs_set_deep_sleep(priv, 1);
+			else if (vwrq->value == -1000)
+				ret = lbs_set_deep_sleep(priv, 0);
+			return ret;
+		}
 	}
 
 	if (priv->psmode != LBS802_11POWERMODECAM) {
@@ -752,6 +818,7 @@
 	}
 
 	lbs_deb_leave(LBS_DEB_WEXT);
+
 	return 0;
 }
 
@@ -785,7 +852,7 @@
 	u32 rssi_qual;
 	u32 tx_qual;
 	u32 quality = 0;
-	int stats_valid = 0;
+	int ret, stats_valid = 0;
 	u8 rssi;
 	u32 tx_retries;
 	struct cmd_ds_802_11_get_log log;
@@ -834,7 +901,9 @@
 
 	memset(&log, 0, sizeof(log));
 	log.hdr.size = cpu_to_le16(sizeof(log));
-	lbs_cmd_with_response(priv, CMD_802_11_GET_LOG, &log);
+	ret = lbs_cmd_with_response(priv, CMD_802_11_GET_LOG, &log);
+	if (ret)
+		goto out;
 
 	tx_retries = le32_to_cpu(log.retry);
 
@@ -862,8 +931,10 @@
 	stats_valid = 1;
 
 	/* update stats asynchronously for future calls */
-	lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
+	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
 					0, 0, NULL);
+	if (ret)
+		lbs_pr_err("RSSI command failed\n");
 out:
 	if (!stats_valid) {
 		priv->wstats.miss.beacon = 0;
@@ -973,7 +1044,7 @@
 		goto out;
 	}
 
-	if (fwrq->m != priv->curbssparams.channel) {
+	if (fwrq->m != priv->channel) {
 		lbs_deb_wext("mesh channel change forces eth disconnect\n");
 		if (priv->mode == IW_MODE_INFRA)
 			lbs_cmd_80211_deauthenticate(priv,
@@ -1000,6 +1071,7 @@
 	u8 rates[MAX_RATES + 1];
 
 	lbs_deb_enter(LBS_DEB_WEXT);
+
 	lbs_deb_wext("vwrq->value %d\n", vwrq->value);
 	lbs_deb_wext("vwrq->fixed %d\n", vwrq->fixed);
 
@@ -1975,7 +2047,7 @@
 {
 	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
-	u8 ssid[IW_ESSID_MAX_SIZE];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	u8 ssid_len = 0;
 	struct assoc_request * assoc_req;
 	int in_ssid_len = dwrq->length;
@@ -1989,7 +2061,7 @@
 	}
 
 	/* Check the size of the string */
-	if (in_ssid_len > IW_ESSID_MAX_SIZE) {
+	if (in_ssid_len > IEEE80211_MAX_SSID_LEN) {
 		ret = -E2BIG;
 		goto out;
 	}
@@ -2020,7 +2092,7 @@
 			ret = -ENOMEM;
 		} else {
 			/* Copy the SSID to the association request */
-			memcpy(&assoc_req->ssid, &ssid, IW_ESSID_MAX_SIZE);
+			memcpy(&assoc_req->ssid, &ssid, IEEE80211_MAX_SSID_LEN);
 			assoc_req->ssid_len = ssid_len;
 			set_bit(ASSOC_FLAG_SSID, &assoc_req->flags);
 			lbs_postpone_association_work(priv);
@@ -2071,7 +2143,7 @@
 	}
 
 	/* Check the size of the string */
-	if (dwrq->length > IW_ESSID_MAX_SIZE) {
+	if (dwrq->length > IEEE80211_MAX_SSID_LEN) {
 		ret = -E2BIG;
 		goto out;
 	}
@@ -2086,7 +2158,7 @@
 	}
 
 	lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-			priv->curbssparams.channel);
+			priv->channel);
  out:
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret);
 	return ret;
diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
index 4c08db4..f3f19fe 100644
--- a/drivers/net/wireless/libertas/wext.h
+++ b/drivers/net/wireless/libertas/wext.h
@@ -4,7 +4,14 @@
 #ifndef	_LBS_WEXT_H_
 #define	_LBS_WEXT_H_
 
+void lbs_send_disconnect_notification(struct lbs_private *priv);
+void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event);
+
+struct chan_freq_power *lbs_find_cfp_by_band_and_channel(
+	struct lbs_private *priv,
+	u8 band,
+	u16 channel);
+
 extern struct iw_handler_def lbs_handler_def;
-extern struct iw_handler_def mesh_handler_def;
 
 #endif
diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c
index 392337b..3691c30 100644
--- a/drivers/net/wireless/libertas_tf/if_usb.c
+++ b/drivers/net/wireless/libertas_tf/if_usb.c
@@ -23,6 +23,8 @@
 static char *lbtf_fw_name = "lbtf_usb.bin";
 module_param_named(fw_name, lbtf_fw_name, charp, 0644);
 
+MODULE_FIRMWARE("lbtf_usb.bin");
+
 static struct usb_device_id if_usb_table[] = {
 	/* Enter the device signature inside */
 	{ USB_DEVICE(0x1286, 0x2001) },
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 38cfd79..88e4117 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -284,7 +284,7 @@
 	struct ieee80211_channel *channel;
 	unsigned long beacon_int; /* in jiffies unit */
 	unsigned int rx_filter;
-	int started;
+	bool started, idle;
 	struct timer_list beacon_timer;
 	enum ps_mode {
 		PS_DISABLED, PS_ENABLED, PS_AUTO_POLL, PS_MANUAL_POLL
@@ -365,6 +365,49 @@
 }
 
 
+static void mac80211_hwsim_monitor_ack(struct ieee80211_hw *hw, const u8 *addr)
+{
+	struct mac80211_hwsim_data *data = hw->priv;
+	struct sk_buff *skb;
+	struct hwsim_radiotap_hdr *hdr;
+	u16 flags;
+	struct ieee80211_hdr *hdr11;
+
+	if (!netif_running(hwsim_mon))
+		return;
+
+	skb = dev_alloc_skb(100);
+	if (skb == NULL)
+		return;
+
+	hdr = (struct hwsim_radiotap_hdr *) skb_put(skb, sizeof(*hdr));
+	hdr->hdr.it_version = PKTHDR_RADIOTAP_VERSION;
+	hdr->hdr.it_pad = 0;
+	hdr->hdr.it_len = cpu_to_le16(sizeof(*hdr));
+	hdr->hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
+					  (1 << IEEE80211_RADIOTAP_CHANNEL));
+	hdr->rt_flags = 0;
+	hdr->rt_rate = 0;
+	hdr->rt_channel = cpu_to_le16(data->channel->center_freq);
+	flags = IEEE80211_CHAN_2GHZ;
+	hdr->rt_chbitmask = cpu_to_le16(flags);
+
+	hdr11 = (struct ieee80211_hdr *) skb_put(skb, 10);
+	hdr11->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL |
+					   IEEE80211_STYPE_ACK);
+	hdr11->duration_id = cpu_to_le16(0);
+	memcpy(hdr11->addr1, addr, ETH_ALEN);
+
+	skb->dev = hwsim_mon;
+	skb_set_mac_header(skb, 0);
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb->pkt_type = PACKET_OTHERHOST;
+	skb->protocol = htons(ETH_P_802_2);
+	memset(skb->cb, 0, sizeof(skb->cb));
+	netif_rx(skb);
+}
+
+
 static bool hwsim_ps_rx_ok(struct mac80211_hwsim_data *data,
 			   struct sk_buff *skb)
 {
@@ -402,6 +445,12 @@
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_rx_status rx_status;
 
+	if (data->idle) {
+		printk(KERN_DEBUG "%s: Trying to TX when idle - reject\n",
+		       wiphy_name(hw->wiphy));
+		return false;
+	}
+
 	memset(&rx_status, 0, sizeof(rx_status));
 	/* TODO: set mactime */
 	rx_status.freq = data->channel->center_freq;
@@ -428,7 +477,8 @@
 		if (data == data2)
 			continue;
 
-		if (!data2->started || !hwsim_ps_rx_ok(data2, skb) ||
+		if (data2->idle || !data2->started ||
+		    !hwsim_ps_rx_ok(data2, skb) ||
 		    !data->channel || !data2->channel ||
 		    data->channel->center_freq != data2->channel->center_freq ||
 		    !(data->group & data2->group))
@@ -464,6 +514,10 @@
 	}
 
 	ack = mac80211_hwsim_tx_frame(hw, skb);
+	if (ack && skb->len >= 16) {
+		struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+		mac80211_hwsim_monitor_ack(hw, hdr->addr2);
+	}
 
 	txi = IEEE80211_SKB_CB(skb);
 
@@ -571,6 +625,8 @@
 	       !!(conf->flags & IEEE80211_CONF_IDLE),
 	       !!(conf->flags & IEEE80211_CONF_PS));
 
+	data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
+
 	data->channel = conf->channel;
 	if (!data->started || !data->beacon_int)
 		del_timer(&data->beacon_timer);
@@ -1045,19 +1101,20 @@
 				sband->channels = data->channels_2ghz;
 				sband->n_channels =
 					ARRAY_SIZE(hwsim_channels_2ghz);
+				sband->bitrates = data->rates;
+				sband->n_bitrates = ARRAY_SIZE(hwsim_rates);
 				break;
 			case IEEE80211_BAND_5GHZ:
 				sband->channels = data->channels_5ghz;
 				sband->n_channels =
 					ARRAY_SIZE(hwsim_channels_5ghz);
+				sband->bitrates = data->rates + 4;
+				sband->n_bitrates = ARRAY_SIZE(hwsim_rates) - 4;
 				break;
 			default:
 				break;
 			}
 
-			sband->bitrates = data->rates;
-			sband->n_bitrates = ARRAY_SIZE(hwsim_rates);
-
 			sband->ht_cap.ht_supported = true;
 			sband->ht_cap.cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
 				IEEE80211_HT_CAP_GRN_FLD |
@@ -1089,46 +1146,46 @@
 			break;
 		case HWSIM_REGTEST_WORLD_ROAM:
 			if (i == 0) {
-				hw->wiphy->custom_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 				wiphy_apply_custom_regulatory(hw->wiphy,
 					&hwsim_world_regdom_custom_01);
 			}
 			break;
 		case HWSIM_REGTEST_CUSTOM_WORLD:
-			hw->wiphy->custom_regulatory = true;
+			hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 			wiphy_apply_custom_regulatory(hw->wiphy,
 				&hwsim_world_regdom_custom_01);
 			break;
 		case HWSIM_REGTEST_CUSTOM_WORLD_2:
 			if (i == 0) {
-				hw->wiphy->custom_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 				wiphy_apply_custom_regulatory(hw->wiphy,
 					&hwsim_world_regdom_custom_01);
 			} else if (i == 1) {
-				hw->wiphy->custom_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 				wiphy_apply_custom_regulatory(hw->wiphy,
 					&hwsim_world_regdom_custom_02);
 			}
 			break;
 		case HWSIM_REGTEST_STRICT_ALL:
-			hw->wiphy->strict_regulatory = true;
+			hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
 			break;
 		case HWSIM_REGTEST_STRICT_FOLLOW:
 		case HWSIM_REGTEST_STRICT_AND_DRIVER_REG:
 			if (i == 0)
-				hw->wiphy->strict_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
 			break;
 		case HWSIM_REGTEST_ALL:
 			if (i == 0) {
-				hw->wiphy->custom_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 				wiphy_apply_custom_regulatory(hw->wiphy,
 					&hwsim_world_regdom_custom_01);
 			} else if (i == 1) {
-				hw->wiphy->custom_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
 				wiphy_apply_custom_regulatory(hw->wiphy,
 					&hwsim_world_regdom_custom_02);
 			} else if (i == 4)
-				hw->wiphy->strict_regulatory = true;
+				hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY;
 			break;
 		default:
 			break;
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index 746532e..0cb5ecc 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/pci.h>
@@ -27,18 +28,6 @@
 #define MWL8K_NAME	KBUILD_MODNAME
 #define MWL8K_VERSION	"0.10"
 
-MODULE_DESCRIPTION(MWL8K_DESC);
-MODULE_VERSION(MWL8K_VERSION);
-MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com>");
-MODULE_LICENSE("GPL");
-
-static DEFINE_PCI_DEVICE_TABLE(mwl8k_table) = {
-	{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = 8687, },
-	{ PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = 8687, },
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, mwl8k_table);
-
 /* Register definitions */
 #define MWL8K_HIU_GEN_PTR			0x00000c10
 #define  MWL8K_MODE_STA				 0x0000005a
@@ -88,72 +77,89 @@
 				 MWL8K_A2H_INT_RX_READY | \
 				 MWL8K_A2H_INT_TX_DONE)
 
-/* WME stream classes */
-#define WME_AC_BE	0		/* best effort */
-#define WME_AC_BK	1		/* background */
-#define WME_AC_VI	2		/* video */
-#define WME_AC_VO	3		/* voice */
-
 #define MWL8K_RX_QUEUES		1
 #define MWL8K_TX_QUEUES		4
 
+struct rxd_ops {
+	int rxd_size;
+	void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr);
+	void (*rxd_refill)(void *rxd, dma_addr_t addr, int len);
+	int (*rxd_process)(void *rxd, struct ieee80211_rx_status *status);
+};
+
+struct mwl8k_device_info {
+	char *part_name;
+	char *helper_image;
+	char *fw_image;
+	struct rxd_ops *rxd_ops;
+	u16 modes;
+};
+
 struct mwl8k_rx_queue {
-	int rx_desc_count;
+	int rxd_count;
 
 	/* hw receives here */
-	int rx_head;
+	int head;
 
 	/* refill descs here */
-	int rx_tail;
+	int tail;
 
-	struct mwl8k_rx_desc *rx_desc_area;
-	dma_addr_t rx_desc_dma;
-	struct sk_buff **rx_skb;
+	void *rxd;
+	dma_addr_t rxd_dma;
+	struct {
+		struct sk_buff *skb;
+		DECLARE_PCI_UNMAP_ADDR(dma)
+	} *buf;
 };
 
 struct mwl8k_tx_queue {
 	/* hw transmits here */
-	int tx_head;
+	int head;
 
 	/* sw appends here */
-	int tx_tail;
+	int tail;
 
-	struct ieee80211_tx_queue_stats tx_stats;
-	struct mwl8k_tx_desc *tx_desc_area;
-	dma_addr_t tx_desc_dma;
-	struct sk_buff **tx_skb;
+	struct ieee80211_tx_queue_stats stats;
+	struct mwl8k_tx_desc *txd;
+	dma_addr_t txd_dma;
+	struct sk_buff **skb;
 };
 
 /* Pointers to the firmware data and meta information about it.  */
 struct mwl8k_firmware {
-	/* Microcode */
-	struct firmware *ucode;
-
 	/* Boot helper code */
 	struct firmware *helper;
+
+	/* Microcode */
+	struct firmware *ucode;
 };
 
 struct mwl8k_priv {
+	void __iomem *sram;
 	void __iomem *regs;
 	struct ieee80211_hw *hw;
 
 	struct pci_dev *pdev;
-	u8 name[16];
+
+	struct mwl8k_device_info *device_info;
+	bool ap_fw;
+	struct rxd_ops *rxd_ops;
 
 	/* firmware files and meta data */
 	struct mwl8k_firmware fw;
-	u32 part_num;
 
 	/* firmware access */
 	struct mutex fw_mutex;
 	struct task_struct *fw_mutex_owner;
 	int fw_mutex_depth;
-	struct completion *tx_wait;
 	struct completion *hostcmd_wait;
 
 	/* lock held over TX and TX reap */
 	spinlock_t tx_lock;
 
+	/* TX quiesce completion, protected by fw_mutex and tx_lock */
+	struct completion *tx_wait;
+
 	struct ieee80211_vif *vif;
 
 	struct ieee80211_channel *current_channel;
@@ -178,10 +184,11 @@
 	/* PHY parameters */
 	struct ieee80211_supported_band band;
 	struct ieee80211_channel channels[14];
-	struct ieee80211_rate rates[12];
+	struct ieee80211_rate rates[13];
 
 	bool radio_on;
 	bool radio_short_preamble;
+	bool sniffer_enabled;
 	bool wmm_enabled;
 
 	/* XXX need to convert this to handle multiple interfaces */
@@ -199,9 +206,6 @@
 
 	/* Tasklet to reclaim TX descriptors and buffers after tx */
 	struct tasklet_struct tx_reclaim_task;
-
-	/* Work thread to serialize configuration requests */
-	struct workqueue_struct *config_wq;
 };
 
 /* Per interface specific private data */
@@ -220,7 +224,7 @@
 	 * Subset of supported legacy rates.
 	 * Intersection of AP and STA supported rates.
 	 */
-	struct ieee80211_rate legacy_rates[12];
+	struct ieee80211_rate legacy_rates[13];
 
 	/* number of supported legacy rates */
 	u8	legacy_nrates;
@@ -252,9 +256,10 @@
 	{ .bitrate = 10, .hw_value = 2, },
 	{ .bitrate = 20, .hw_value = 4, },
 	{ .bitrate = 55, .hw_value = 11, },
+	{ .bitrate = 110, .hw_value = 22, },
+	{ .bitrate = 220, .hw_value = 44, },
 	{ .bitrate = 60, .hw_value = 12, },
 	{ .bitrate = 90, .hw_value = 18, },
-	{ .bitrate = 110, .hw_value = 22, },
 	{ .bitrate = 120, .hw_value = 24, },
 	{ .bitrate = 180, .hw_value = 36, },
 	{ .bitrate = 240, .hw_value = 48, },
@@ -270,10 +275,12 @@
 /* Firmware command codes */
 #define MWL8K_CMD_CODE_DNLD		0x0001
 #define MWL8K_CMD_GET_HW_SPEC		0x0003
+#define MWL8K_CMD_SET_HW_SPEC		0x0004
 #define MWL8K_CMD_MAC_MULTICAST_ADR	0x0010
 #define MWL8K_CMD_GET_STAT		0x0014
 #define MWL8K_CMD_RADIO_CONTROL		0x001c
 #define MWL8K_CMD_RF_TX_POWER		0x001e
+#define MWL8K_CMD_RF_ANTENNA		0x0020
 #define MWL8K_CMD_SET_PRE_SCAN		0x0107
 #define MWL8K_CMD_SET_POST_SCAN		0x0108
 #define MWL8K_CMD_SET_RF_CHANNEL	0x010a
@@ -287,6 +294,7 @@
 #define MWL8K_CMD_MIMO_CONFIG		0x0125
 #define MWL8K_CMD_USE_FIXED_RATE	0x0126
 #define MWL8K_CMD_ENABLE_SNIFFER	0x0150
+#define MWL8K_CMD_SET_MAC_ADDR		0x0202
 #define MWL8K_CMD_SET_RATEADAPT_MODE	0x0203
 #define MWL8K_CMD_UPDATE_STADB		0x1123
 
@@ -299,10 +307,12 @@
 	switch (cmd & ~0x8000) {
 		MWL8K_CMDNAME(CODE_DNLD);
 		MWL8K_CMDNAME(GET_HW_SPEC);
+		MWL8K_CMDNAME(SET_HW_SPEC);
 		MWL8K_CMDNAME(MAC_MULTICAST_ADR);
 		MWL8K_CMDNAME(GET_STAT);
 		MWL8K_CMDNAME(RADIO_CONTROL);
 		MWL8K_CMDNAME(RF_TX_POWER);
+		MWL8K_CMDNAME(RF_ANTENNA);
 		MWL8K_CMDNAME(SET_PRE_SCAN);
 		MWL8K_CMDNAME(SET_POST_SCAN);
 		MWL8K_CMDNAME(SET_RF_CHANNEL);
@@ -316,6 +326,7 @@
 		MWL8K_CMDNAME(MIMO_CONFIG);
 		MWL8K_CMDNAME(USE_FIXED_RATE);
 		MWL8K_CMDNAME(ENABLE_SNIFFER);
+		MWL8K_CMDNAME(SET_MAC_ADDR);
 		MWL8K_CMDNAME(SET_RATEADAPT_MODE);
 		MWL8K_CMDNAME(UPDATE_STADB);
 	default:
@@ -353,41 +364,35 @@
 
 /* Request fw image */
 static int mwl8k_request_fw(struct mwl8k_priv *priv,
-				const char *fname, struct firmware **fw)
+			    const char *fname, struct firmware **fw)
 {
 	/* release current image */
 	if (*fw != NULL)
 		mwl8k_release_fw(fw);
 
 	return request_firmware((const struct firmware **)fw,
-						fname, &priv->pdev->dev);
+				fname, &priv->pdev->dev);
 }
 
-static int mwl8k_request_firmware(struct mwl8k_priv *priv, u32 part_num)
+static int mwl8k_request_firmware(struct mwl8k_priv *priv)
 {
-	u8 filename[64];
+	struct mwl8k_device_info *di = priv->device_info;
 	int rc;
 
-	priv->part_num = part_num;
-
-	snprintf(filename, sizeof(filename),
-		 "mwl8k/helper_%u.fw", priv->part_num);
-
-	rc = mwl8k_request_fw(priv, filename, &priv->fw.helper);
-	if (rc) {
-		printk(KERN_ERR
-			"%s Error requesting helper firmware file %s\n",
-			pci_name(priv->pdev), filename);
-		return rc;
+	if (di->helper_image != NULL) {
+		rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw.helper);
+		if (rc) {
+			printk(KERN_ERR "%s: Error requesting helper "
+			       "firmware file %s\n", pci_name(priv->pdev),
+			       di->helper_image);
+			return rc;
+		}
 	}
 
-	snprintf(filename, sizeof(filename),
-		 "mwl8k/fmimage_%u.fw", priv->part_num);
-
-	rc = mwl8k_request_fw(priv, filename, &priv->fw.ucode);
+	rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw.ucode);
 	if (rc) {
-		printk(KERN_ERR "%s Error requesting firmware file %s\n",
-					pci_name(priv->pdev), filename);
+		printk(KERN_ERR "%s: Error requesting firmware file %s\n",
+		       pci_name(priv->pdev), di->fw_image);
 		mwl8k_release_fw(&priv->fw.helper);
 		return rc;
 	}
@@ -395,6 +400,9 @@
 	return 0;
 }
 
+MODULE_FIRMWARE("mwl8k/helper_8687.fw");
+MODULE_FIRMWARE("mwl8k/fmimage_8687.fw");
+
 struct mwl8k_cmd_pkt {
 	__le16	code;
 	__le16	length;
@@ -434,6 +442,7 @@
 			break;
 		}
 
+		cond_resched();
 		udelay(1);
 	} while (--loops);
 
@@ -542,43 +551,62 @@
 	return rc;
 }
 
-static int mwl8k_load_firmware(struct mwl8k_priv *priv)
+static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 {
-	int loops, rc;
+	struct mwl8k_priv *priv = hw->priv;
+	struct firmware *fw = priv->fw.ucode;
+	struct mwl8k_device_info *di = priv->device_info;
+	int rc;
+	int loops;
 
-	const u8 *ucode = priv->fw.ucode->data;
-	size_t ucode_len = priv->fw.ucode->size;
-	const u8 *helper = priv->fw.helper->data;
-	size_t helper_len = priv->fw.helper->size;
+	if (!memcmp(fw->data, "\x01\x00\x00\x00", 4)) {
+		struct firmware *helper = priv->fw.helper;
 
-	if (!memcmp(ucode, "\x01\x00\x00\x00", 4)) {
-		rc = mwl8k_load_fw_image(priv, helper, helper_len);
+		if (helper == NULL) {
+			printk(KERN_ERR "%s: helper image needed but none "
+			       "given\n", pci_name(priv->pdev));
+			return -EINVAL;
+		}
+
+		rc = mwl8k_load_fw_image(priv, helper->data, helper->size);
 		if (rc) {
 			printk(KERN_ERR "%s: unable to load firmware "
-				"helper image\n", pci_name(priv->pdev));
+			       "helper image\n", pci_name(priv->pdev));
 			return rc;
 		}
 		msleep(1);
 
-		rc = mwl8k_feed_fw_image(priv, ucode, ucode_len);
+		rc = mwl8k_feed_fw_image(priv, fw->data, fw->size);
 	} else {
-		rc = mwl8k_load_fw_image(priv, ucode, ucode_len);
+		rc = mwl8k_load_fw_image(priv, fw->data, fw->size);
 	}
 
 	if (rc) {
-		printk(KERN_ERR "%s: unable to load firmware data\n",
-			pci_name(priv->pdev));
+		printk(KERN_ERR "%s: unable to load firmware image\n",
+		       pci_name(priv->pdev));
 		return rc;
 	}
 
-	iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
+	if (di->modes & BIT(NL80211_IFTYPE_AP))
+		iowrite32(MWL8K_MODE_AP, priv->regs + MWL8K_HIU_GEN_PTR);
+	else
+		iowrite32(MWL8K_MODE_STA, priv->regs + MWL8K_HIU_GEN_PTR);
 	msleep(1);
 
 	loops = 200000;
 	do {
-		if (ioread32(priv->regs + MWL8K_HIU_INT_CODE)
-						== MWL8K_FWSTA_READY)
+		u32 ready_code;
+
+		ready_code = ioread32(priv->regs + MWL8K_HIU_INT_CODE);
+		if (ready_code == MWL8K_FWAP_READY) {
+			priv->ap_fw = 1;
 			break;
+		} else if (ready_code == MWL8K_FWSTA_READY) {
+			priv->ap_fw = 0;
+			break;
+		}
+
+		cond_resched();
 		udelay(1);
 	} while (--loops);
 
@@ -605,7 +633,7 @@
 /* Peer Entry flags - used to define the type of the peer node */
 #define MWL8K_PEER_TYPE_ACCESSPOINT	2
 
-#define MWL8K_IEEE_LEGACY_DATA_RATES	12
+#define MWL8K_IEEE_LEGACY_DATA_RATES	13
 #define MWL8K_MCS_BITMAP_SIZE		16
 
 struct peer_capability_info {
@@ -731,16 +759,96 @@
 
 
 /*
- * Packet reception.
+ * Packet reception for 88w8366.
  */
-#define MWL8K_RX_CTRL_OWNED_BY_HOST	0x02
+struct mwl8k_rxd_8366 {
+	__le16 pkt_len;
+	__u8 sq2;
+	__u8 rate;
+	__le32 pkt_phys_addr;
+	__le32 next_rxd_phys_addr;
+	__le16 qos_control;
+	__le16 htsig2;
+	__le32 hw_rssi_info;
+	__le32 hw_noise_floor_info;
+	__u8 noise_floor;
+	__u8 pad0[3];
+	__u8 rssi;
+	__u8 rx_status;
+	__u8 channel;
+	__u8 rx_ctrl;
+} __attribute__((packed));
 
-struct mwl8k_rx_desc {
+#define MWL8K_8366_RX_CTRL_OWNED_BY_HOST	0x80
+
+static void mwl8k_rxd_8366_init(void *_rxd, dma_addr_t next_dma_addr)
+{
+	struct mwl8k_rxd_8366 *rxd = _rxd;
+
+	rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
+	rxd->rx_ctrl = MWL8K_8366_RX_CTRL_OWNED_BY_HOST;
+}
+
+static void mwl8k_rxd_8366_refill(void *_rxd, dma_addr_t addr, int len)
+{
+	struct mwl8k_rxd_8366 *rxd = _rxd;
+
+	rxd->pkt_len = cpu_to_le16(len);
+	rxd->pkt_phys_addr = cpu_to_le32(addr);
+	wmb();
+	rxd->rx_ctrl = 0;
+}
+
+static int
+mwl8k_rxd_8366_process(void *_rxd, struct ieee80211_rx_status *status)
+{
+	struct mwl8k_rxd_8366 *rxd = _rxd;
+
+	if (!(rxd->rx_ctrl & MWL8K_8366_RX_CTRL_OWNED_BY_HOST))
+		return -1;
+	rmb();
+
+	memset(status, 0, sizeof(*status));
+
+	status->signal = -rxd->rssi;
+	status->noise = -rxd->noise_floor;
+
+	if (rxd->rate & 0x80) {
+		status->flag |= RX_FLAG_HT;
+		status->rate_idx = rxd->rate & 0x7f;
+	} else {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(mwl8k_rates); i++) {
+			if (mwl8k_rates[i].hw_value == rxd->rate) {
+				status->rate_idx = i;
+				break;
+			}
+		}
+	}
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->freq = ieee80211_channel_to_frequency(rxd->channel);
+
+	return le16_to_cpu(rxd->pkt_len);
+}
+
+static struct rxd_ops rxd_8366_ops = {
+	.rxd_size	= sizeof(struct mwl8k_rxd_8366),
+	.rxd_init	= mwl8k_rxd_8366_init,
+	.rxd_refill	= mwl8k_rxd_8366_refill,
+	.rxd_process	= mwl8k_rxd_8366_process,
+};
+
+/*
+ * Packet reception for 88w8687.
+ */
+struct mwl8k_rxd_8687 {
 	__le16 pkt_len;
 	__u8 link_quality;
 	__u8 noise_level;
 	__le32 pkt_phys_addr;
-	__le32 next_rx_desc_phys_addr;
+	__le32 next_rxd_phys_addr;
 	__le16 qos_control;
 	__le16 rate_info;
 	__le32 pad0[4];
@@ -752,6 +860,76 @@
 	__u8 pad2[2];
 } __attribute__((packed));
 
+#define MWL8K_8687_RATE_INFO_SHORTPRE		0x8000
+#define MWL8K_8687_RATE_INFO_ANTSELECT(x)	(((x) >> 11) & 0x3)
+#define MWL8K_8687_RATE_INFO_RATEID(x)		(((x) >> 3) & 0x3f)
+#define MWL8K_8687_RATE_INFO_40MHZ		0x0004
+#define MWL8K_8687_RATE_INFO_SHORTGI		0x0002
+#define MWL8K_8687_RATE_INFO_MCS_FORMAT		0x0001
+
+#define MWL8K_8687_RX_CTRL_OWNED_BY_HOST	0x02
+
+static void mwl8k_rxd_8687_init(void *_rxd, dma_addr_t next_dma_addr)
+{
+	struct mwl8k_rxd_8687 *rxd = _rxd;
+
+	rxd->next_rxd_phys_addr = cpu_to_le32(next_dma_addr);
+	rxd->rx_ctrl = MWL8K_8687_RX_CTRL_OWNED_BY_HOST;
+}
+
+static void mwl8k_rxd_8687_refill(void *_rxd, dma_addr_t addr, int len)
+{
+	struct mwl8k_rxd_8687 *rxd = _rxd;
+
+	rxd->pkt_len = cpu_to_le16(len);
+	rxd->pkt_phys_addr = cpu_to_le32(addr);
+	wmb();
+	rxd->rx_ctrl = 0;
+}
+
+static int
+mwl8k_rxd_8687_process(void *_rxd, struct ieee80211_rx_status *status)
+{
+	struct mwl8k_rxd_8687 *rxd = _rxd;
+	u16 rate_info;
+
+	if (!(rxd->rx_ctrl & MWL8K_8687_RX_CTRL_OWNED_BY_HOST))
+		return -1;
+	rmb();
+
+	rate_info = le16_to_cpu(rxd->rate_info);
+
+	memset(status, 0, sizeof(*status));
+
+	status->signal = -rxd->rssi;
+	status->noise = -rxd->noise_level;
+	status->qual = rxd->link_quality;
+	status->antenna = MWL8K_8687_RATE_INFO_ANTSELECT(rate_info);
+	status->rate_idx = MWL8K_8687_RATE_INFO_RATEID(rate_info);
+
+	if (rate_info & MWL8K_8687_RATE_INFO_SHORTPRE)
+		status->flag |= RX_FLAG_SHORTPRE;
+	if (rate_info & MWL8K_8687_RATE_INFO_40MHZ)
+		status->flag |= RX_FLAG_40MHZ;
+	if (rate_info & MWL8K_8687_RATE_INFO_SHORTGI)
+		status->flag |= RX_FLAG_SHORT_GI;
+	if (rate_info & MWL8K_8687_RATE_INFO_MCS_FORMAT)
+		status->flag |= RX_FLAG_HT;
+
+	status->band = IEEE80211_BAND_2GHZ;
+	status->freq = ieee80211_channel_to_frequency(rxd->channel);
+
+	return le16_to_cpu(rxd->pkt_len);
+}
+
+static struct rxd_ops rxd_8687_ops = {
+	.rxd_size	= sizeof(struct mwl8k_rxd_8687),
+	.rxd_init	= mwl8k_rxd_8687_init,
+	.rxd_refill	= mwl8k_rxd_8687_refill,
+	.rxd_process	= mwl8k_rxd_8687_process,
+};
+
+
 #define MWL8K_RX_DESCS		256
 #define MWL8K_RX_MAXSZ		3800
 
@@ -762,43 +940,44 @@
 	int size;
 	int i;
 
-	rxq->rx_desc_count = 0;
-	rxq->rx_head = 0;
-	rxq->rx_tail = 0;
+	rxq->rxd_count = 0;
+	rxq->head = 0;
+	rxq->tail = 0;
 
-	size = MWL8K_RX_DESCS * sizeof(struct mwl8k_rx_desc);
+	size = MWL8K_RX_DESCS * priv->rxd_ops->rxd_size;
 
-	rxq->rx_desc_area =
-		pci_alloc_consistent(priv->pdev, size, &rxq->rx_desc_dma);
-	if (rxq->rx_desc_area == NULL) {
+	rxq->rxd = pci_alloc_consistent(priv->pdev, size, &rxq->rxd_dma);
+	if (rxq->rxd == NULL) {
 		printk(KERN_ERR "%s: failed to alloc RX descriptors\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		return -ENOMEM;
 	}
-	memset(rxq->rx_desc_area, 0, size);
+	memset(rxq->rxd, 0, size);
 
-	rxq->rx_skb = kmalloc(MWL8K_RX_DESCS *
-				sizeof(*rxq->rx_skb), GFP_KERNEL);
-	if (rxq->rx_skb == NULL) {
+	rxq->buf = kmalloc(MWL8K_RX_DESCS * sizeof(*rxq->buf), GFP_KERNEL);
+	if (rxq->buf == NULL) {
 		printk(KERN_ERR "%s: failed to alloc RX skbuff list\n",
-			priv->name);
-		pci_free_consistent(priv->pdev, size,
-				    rxq->rx_desc_area, rxq->rx_desc_dma);
+		       wiphy_name(hw->wiphy));
+		pci_free_consistent(priv->pdev, size, rxq->rxd, rxq->rxd_dma);
 		return -ENOMEM;
 	}
-	memset(rxq->rx_skb, 0, MWL8K_RX_DESCS * sizeof(*rxq->rx_skb));
+	memset(rxq->buf, 0, MWL8K_RX_DESCS * sizeof(*rxq->buf));
 
 	for (i = 0; i < MWL8K_RX_DESCS; i++) {
-		struct mwl8k_rx_desc *rx_desc;
+		int desc_size;
+		void *rxd;
 		int nexti;
+		dma_addr_t next_dma_addr;
 
-		rx_desc = rxq->rx_desc_area + i;
-		nexti = (i + 1) % MWL8K_RX_DESCS;
+		desc_size = priv->rxd_ops->rxd_size;
+		rxd = rxq->rxd + (i * priv->rxd_ops->rxd_size);
 
-		rx_desc->next_rx_desc_phys_addr =
-			cpu_to_le32(rxq->rx_desc_dma
-						+ nexti * sizeof(*rx_desc));
-		rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST;
+		nexti = i + 1;
+		if (nexti == MWL8K_RX_DESCS)
+			nexti = 0;
+		next_dma_addr = rxq->rxd_dma + (nexti * desc_size);
+
+		priv->rxd_ops->rxd_init(rxd, next_dma_addr);
 	}
 
 	return 0;
@@ -811,27 +990,28 @@
 	int refilled;
 
 	refilled = 0;
-	while (rxq->rx_desc_count < MWL8K_RX_DESCS && limit--) {
+	while (rxq->rxd_count < MWL8K_RX_DESCS && limit--) {
 		struct sk_buff *skb;
+		dma_addr_t addr;
 		int rx;
+		void *rxd;
 
 		skb = dev_alloc_skb(MWL8K_RX_MAXSZ);
 		if (skb == NULL)
 			break;
 
-		rxq->rx_desc_count++;
+		addr = pci_map_single(priv->pdev, skb->data,
+				      MWL8K_RX_MAXSZ, DMA_FROM_DEVICE);
 
-		rx = rxq->rx_tail;
-		rxq->rx_tail = (rx + 1) % MWL8K_RX_DESCS;
+		rxq->rxd_count++;
+		rx = rxq->tail++;
+		if (rxq->tail == MWL8K_RX_DESCS)
+			rxq->tail = 0;
+		rxq->buf[rx].skb = skb;
+		pci_unmap_addr_set(&rxq->buf[rx], dma, addr);
 
-		rxq->rx_desc_area[rx].pkt_phys_addr =
-			cpu_to_le32(pci_map_single(priv->pdev, skb->data,
-					MWL8K_RX_MAXSZ, DMA_FROM_DEVICE));
-
-		rxq->rx_desc_area[rx].pkt_len = cpu_to_le16(MWL8K_RX_MAXSZ);
-		rxq->rx_skb[rx] = skb;
-		wmb();
-		rxq->rx_desc_area[rx].rx_ctrl = 0;
+		rxd = rxq->rxd + (rx * priv->rxd_ops->rxd_size);
+		priv->rxd_ops->rxd_refill(rxd, addr, MWL8K_RX_MAXSZ);
 
 		refilled++;
 	}
@@ -847,24 +1027,24 @@
 	int i;
 
 	for (i = 0; i < MWL8K_RX_DESCS; i++) {
-		if (rxq->rx_skb[i] != NULL) {
-			unsigned long addr;
+		if (rxq->buf[i].skb != NULL) {
+			pci_unmap_single(priv->pdev,
+					 pci_unmap_addr(&rxq->buf[i], dma),
+					 MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
+			pci_unmap_addr_set(&rxq->buf[i], dma, 0);
 
-			addr = le32_to_cpu(rxq->rx_desc_area[i].pkt_phys_addr);
-			pci_unmap_single(priv->pdev, addr, MWL8K_RX_MAXSZ,
-					 PCI_DMA_FROMDEVICE);
-			kfree_skb(rxq->rx_skb[i]);
-			rxq->rx_skb[i] = NULL;
+			kfree_skb(rxq->buf[i].skb);
+			rxq->buf[i].skb = NULL;
 		}
 	}
 
-	kfree(rxq->rx_skb);
-	rxq->rx_skb = NULL;
+	kfree(rxq->buf);
+	rxq->buf = NULL;
 
 	pci_free_consistent(priv->pdev,
-			    MWL8K_RX_DESCS * sizeof(struct mwl8k_rx_desc),
-			    rxq->rx_desc_area, rxq->rx_desc_dma);
-	rxq->rx_desc_area = NULL;
+			    MWL8K_RX_DESCS * priv->rxd_ops->rxd_size,
+			    rxq->rxd, rxq->rxd_dma);
+	rxq->rxd = NULL;
 }
 
 
@@ -880,9 +1060,11 @@
 		!compare_ether_addr(wh->addr3, priv->capture_bssid);
 }
 
-static inline void mwl8k_save_beacon(struct mwl8k_priv *priv,
-							struct sk_buff *skb)
+static inline void mwl8k_save_beacon(struct ieee80211_hw *hw,
+				     struct sk_buff *skb)
 {
+	struct mwl8k_priv *priv = hw->priv;
+
 	priv->capture_beacon = false;
 	memset(priv->capture_bssid, 0, ETH_ALEN);
 
@@ -893,8 +1075,7 @@
 	 */
 	priv->beacon_skb = skb_copy(skb, GFP_ATOMIC);
 	if (priv->beacon_skb != NULL)
-		queue_work(priv->config_wq,
-				&priv->finalize_join_worker);
+		ieee80211_queue_work(hw, &priv->finalize_join_worker);
 }
 
 static int rxq_process(struct ieee80211_hw *hw, int index, int limit)
@@ -904,53 +1085,46 @@
 	int processed;
 
 	processed = 0;
-	while (rxq->rx_desc_count && limit--) {
-		struct mwl8k_rx_desc *rx_desc;
+	while (rxq->rxd_count && limit--) {
 		struct sk_buff *skb;
+		void *rxd;
+		int pkt_len;
 		struct ieee80211_rx_status status;
-		unsigned long addr;
-		struct ieee80211_hdr *wh;
 
-		rx_desc = rxq->rx_desc_area + rxq->rx_head;
-		if (!(rx_desc->rx_ctrl & MWL8K_RX_CTRL_OWNED_BY_HOST))
-			break;
-		rmb();
-
-		skb = rxq->rx_skb[rxq->rx_head];
+		skb = rxq->buf[rxq->head].skb;
 		if (skb == NULL)
 			break;
-		rxq->rx_skb[rxq->rx_head] = NULL;
 
-		rxq->rx_head = (rxq->rx_head + 1) % MWL8K_RX_DESCS;
-		rxq->rx_desc_count--;
+		rxd = rxq->rxd + (rxq->head * priv->rxd_ops->rxd_size);
 
-		addr = le32_to_cpu(rx_desc->pkt_phys_addr);
-		pci_unmap_single(priv->pdev, addr,
-					MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
+		pkt_len = priv->rxd_ops->rxd_process(rxd, &status);
+		if (pkt_len < 0)
+			break;
 
-		skb_put(skb, le16_to_cpu(rx_desc->pkt_len));
+		rxq->buf[rxq->head].skb = NULL;
+
+		pci_unmap_single(priv->pdev,
+				 pci_unmap_addr(&rxq->buf[rxq->head], dma),
+				 MWL8K_RX_MAXSZ, PCI_DMA_FROMDEVICE);
+		pci_unmap_addr_set(&rxq->buf[rxq->head], dma, 0);
+
+		rxq->head++;
+		if (rxq->head == MWL8K_RX_DESCS)
+			rxq->head = 0;
+
+		rxq->rxd_count--;
+
+		skb_put(skb, pkt_len);
 		mwl8k_remove_dma_header(skb);
 
-		wh = (struct ieee80211_hdr *)skb->data;
-
 		/*
-		 * Check for pending join operation. save a copy of
-		 * the beacon and schedule a tasklet to send finalize
-		 * join command to the firmware.
+		 * Check for a pending join operation.  Save a
+		 * copy of the beacon and schedule a tasklet to
+		 * send a FINALIZE_JOIN command to the firmware.
 		 */
-		if (mwl8k_capture_bssid(priv, wh))
-			mwl8k_save_beacon(priv, skb);
+		if (mwl8k_capture_bssid(priv, (void *)skb->data))
+			mwl8k_save_beacon(hw, skb);
 
-		memset(&status, 0, sizeof(status));
-		status.mactime = 0;
-		status.signal = -rx_desc->rssi;
-		status.noise = -rx_desc->noise_level;
-		status.qual = rx_desc->link_quality;
-		status.antenna = 1;
-		status.rate_idx = 1;
-		status.flag = 0;
-		status.band = IEEE80211_BAND_2GHZ;
-		status.freq = ieee80211_channel_to_frequency(rx_desc->channel);
 		memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
 		ieee80211_rx_irqsafe(hw, skb);
 
@@ -965,24 +1139,10 @@
  * Packet transmission.
  */
 
-/* Transmit queue assignment.  */
-enum {
-	MWL8K_WME_AC_BK	= 0,		/* background access */
-	MWL8K_WME_AC_BE	= 1,		/* best effort access */
-	MWL8K_WME_AC_VI	= 2,		/* video access */
-	MWL8K_WME_AC_VO	= 3,		/* voice access */
-};
-
 /* Transmit packet ACK policy */
 #define MWL8K_TXD_ACK_POLICY_NORMAL		0
 #define MWL8K_TXD_ACK_POLICY_BLOCKACK		3
 
-#define GET_TXQ(_ac) (\
-		((_ac) == WME_AC_VO) ? MWL8K_WME_AC_VO : \
-		((_ac) == WME_AC_VI) ? MWL8K_WME_AC_VI : \
-		((_ac) == WME_AC_BK) ? MWL8K_WME_AC_BK : \
-		MWL8K_WME_AC_BE)
-
 #define MWL8K_TXD_STATUS_OK			0x00000001
 #define MWL8K_TXD_STATUS_OK_RETRY		0x00000002
 #define MWL8K_TXD_STATUS_OK_MORE_RETRY		0x00000004
@@ -997,7 +1157,7 @@
 	__le32 pkt_phys_addr;
 	__le16 pkt_len;
 	__u8 dest_MAC_addr[ETH_ALEN];
-	__le32 next_tx_desc_phys_addr;
+	__le32 next_txd_phys_addr;
 	__le32 reserved;
 	__le16 rate_info;
 	__u8 peer_id;
@@ -1013,44 +1173,40 @@
 	int size;
 	int i;
 
-	memset(&txq->tx_stats, 0, sizeof(struct ieee80211_tx_queue_stats));
-	txq->tx_stats.limit = MWL8K_TX_DESCS;
-	txq->tx_head = 0;
-	txq->tx_tail = 0;
+	memset(&txq->stats, 0, sizeof(struct ieee80211_tx_queue_stats));
+	txq->stats.limit = MWL8K_TX_DESCS;
+	txq->head = 0;
+	txq->tail = 0;
 
 	size = MWL8K_TX_DESCS * sizeof(struct mwl8k_tx_desc);
 
-	txq->tx_desc_area =
-		pci_alloc_consistent(priv->pdev, size, &txq->tx_desc_dma);
-	if (txq->tx_desc_area == NULL) {
+	txq->txd = pci_alloc_consistent(priv->pdev, size, &txq->txd_dma);
+	if (txq->txd == NULL) {
 		printk(KERN_ERR "%s: failed to alloc TX descriptors\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		return -ENOMEM;
 	}
-	memset(txq->tx_desc_area, 0, size);
+	memset(txq->txd, 0, size);
 
-	txq->tx_skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->tx_skb),
-								GFP_KERNEL);
-	if (txq->tx_skb == NULL) {
+	txq->skb = kmalloc(MWL8K_TX_DESCS * sizeof(*txq->skb), GFP_KERNEL);
+	if (txq->skb == NULL) {
 		printk(KERN_ERR "%s: failed to alloc TX skbuff list\n",
-		       priv->name);
-		pci_free_consistent(priv->pdev, size,
-				    txq->tx_desc_area, txq->tx_desc_dma);
+		       wiphy_name(hw->wiphy));
+		pci_free_consistent(priv->pdev, size, txq->txd, txq->txd_dma);
 		return -ENOMEM;
 	}
-	memset(txq->tx_skb, 0, MWL8K_TX_DESCS * sizeof(*txq->tx_skb));
+	memset(txq->skb, 0, MWL8K_TX_DESCS * sizeof(*txq->skb));
 
 	for (i = 0; i < MWL8K_TX_DESCS; i++) {
 		struct mwl8k_tx_desc *tx_desc;
 		int nexti;
 
-		tx_desc = txq->tx_desc_area + i;
+		tx_desc = txq->txd + i;
 		nexti = (i + 1) % MWL8K_TX_DESCS;
 
 		tx_desc->status = 0;
-		tx_desc->next_tx_desc_phys_addr =
-			cpu_to_le32(txq->tx_desc_dma +
-						nexti * sizeof(*tx_desc));
+		tx_desc->next_txd_phys_addr =
+			cpu_to_le32(txq->txd_dma + nexti * sizeof(*tx_desc));
 	}
 
 	return 0;
@@ -1065,11 +1221,6 @@
 	ioread32(priv->regs + MWL8K_HIU_INT_CODE);
 }
 
-static inline int mwl8k_txq_busy(struct mwl8k_priv *priv)
-{
-	return priv->pending_tx_pkts;
-}
-
 struct mwl8k_txq_info {
 	u32 fw_owned;
 	u32 drv_owned;
@@ -1089,14 +1240,13 @@
 
 	memset(txinfo, 0, MWL8K_TX_QUEUES * sizeof(struct mwl8k_txq_info));
 
-	spin_lock_bh(&priv->tx_lock);
 	for (count = 0; count < MWL8K_TX_QUEUES; count++) {
 		txq = priv->txq + count;
-		txinfo[count].len = txq->tx_stats.len;
-		txinfo[count].head = txq->tx_head;
-		txinfo[count].tail = txq->tx_tail;
+		txinfo[count].len = txq->stats.len;
+		txinfo[count].head = txq->head;
+		txinfo[count].tail = txq->tail;
 		for (desc = 0; desc < MWL8K_TX_DESCS; desc++) {
-			tx_desc = txq->tx_desc_area + desc;
+			tx_desc = txq->txd + desc;
 			status = le32_to_cpu(tx_desc->status);
 
 			if (status & MWL8K_TXD_STATUS_FW_OWNED)
@@ -1108,30 +1258,26 @@
 				txinfo[count].unused++;
 		}
 	}
-	spin_unlock_bh(&priv->tx_lock);
 
 	return ndescs;
 }
 
 /*
- * Must be called with hw->fw_mutex held and tx queues stopped.
+ * Must be called with priv->fw_mutex held and tx queues stopped.
  */
 static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	DECLARE_COMPLETION_ONSTACK(cmd_wait);
+	DECLARE_COMPLETION_ONSTACK(tx_wait);
 	u32 count;
 	unsigned long timeout;
 
 	might_sleep();
 
 	spin_lock_bh(&priv->tx_lock);
-	count = mwl8k_txq_busy(priv);
-	if (count) {
-		priv->tx_wait = &cmd_wait;
-		if (priv->radio_on)
-			mwl8k_tx_start(priv);
-	}
+	count = priv->pending_tx_pkts;
+	if (count)
+		priv->tx_wait = &tx_wait;
 	spin_unlock_bh(&priv->tx_lock);
 
 	if (count) {
@@ -1139,23 +1285,23 @@
 		int index;
 		int newcount;
 
-		timeout = wait_for_completion_timeout(&cmd_wait,
+		timeout = wait_for_completion_timeout(&tx_wait,
 					msecs_to_jiffies(5000));
 		if (timeout)
 			return 0;
 
 		spin_lock_bh(&priv->tx_lock);
 		priv->tx_wait = NULL;
-		newcount = mwl8k_txq_busy(priv);
+		newcount = priv->pending_tx_pkts;
+		mwl8k_scan_tx_ring(priv, txinfo);
 		spin_unlock_bh(&priv->tx_lock);
 
 		printk(KERN_ERR "%s(%u) TIMEDOUT:5000ms Pend:%u-->%u\n",
 		       __func__, __LINE__, count, newcount);
 
-		mwl8k_scan_tx_ring(priv, txinfo);
 		for (index = 0; index < MWL8K_TX_QUEUES; index++)
-			printk(KERN_ERR
-				"TXQ:%u L:%u H:%u T:%u FW:%u DRV:%u U:%u\n",
+			printk(KERN_ERR "TXQ:%u L:%u H:%u T:%u FW:%u "
+			       "DRV:%u U:%u\n",
 					index,
 					txinfo[index].len,
 					txinfo[index].head,
@@ -1181,7 +1327,7 @@
 	struct mwl8k_tx_queue *txq = priv->txq + index;
 	int wake = 0;
 
-	while (txq->tx_stats.len > 0) {
+	while (txq->stats.len > 0) {
 		int tx;
 		struct mwl8k_tx_desc *tx_desc;
 		unsigned long addr;
@@ -1190,8 +1336,8 @@
 		struct ieee80211_tx_info *info;
 		u32 status;
 
-		tx = txq->tx_head;
-		tx_desc = txq->tx_desc_area + tx;
+		tx = txq->head;
+		tx_desc = txq->txd + tx;
 
 		status = le32_to_cpu(tx_desc->status);
 
@@ -1202,15 +1348,15 @@
 				~cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED);
 		}
 
-		txq->tx_head = (tx + 1) % MWL8K_TX_DESCS;
-		BUG_ON(txq->tx_stats.len == 0);
-		txq->tx_stats.len--;
+		txq->head = (tx + 1) % MWL8K_TX_DESCS;
+		BUG_ON(txq->stats.len == 0);
+		txq->stats.len--;
 		priv->pending_tx_pkts--;
 
 		addr = le32_to_cpu(tx_desc->pkt_phys_addr);
 		size = le16_to_cpu(tx_desc->pkt_len);
-		skb = txq->tx_skb[tx];
-		txq->tx_skb[tx] = NULL;
+		skb = txq->skb[tx];
+		txq->skb[tx] = NULL;
 
 		BUG_ON(skb == NULL);
 		pci_unmap_single(priv->pdev, addr, size, PCI_DMA_TODEVICE);
@@ -1243,13 +1389,13 @@
 
 	mwl8k_txq_reclaim(hw, index, 1);
 
-	kfree(txq->tx_skb);
-	txq->tx_skb = NULL;
+	kfree(txq->skb);
+	txq->skb = NULL;
 
 	pci_free_consistent(priv->pdev,
 			    MWL8K_TX_DESCS * sizeof(struct mwl8k_tx_desc),
-			    txq->tx_desc_area, txq->tx_desc_dma);
-	txq->tx_desc_area = NULL;
+			    txq->txd, txq->txd_dma);
+	txq->txd = NULL;
 }
 
 static int
@@ -1317,7 +1463,7 @@
 
 	if (pci_dma_mapping_error(priv->pdev, dma)) {
 		printk(KERN_DEBUG "%s: failed to dma map skb, "
-			"dropping TX frame.\n", priv->name);
+		       "dropping TX frame.\n", wiphy_name(hw->wiphy));
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -1326,10 +1472,10 @@
 
 	txq = priv->txq + index;
 
-	BUG_ON(txq->tx_skb[txq->tx_tail] != NULL);
-	txq->tx_skb[txq->tx_tail] = skb;
+	BUG_ON(txq->skb[txq->tail] != NULL);
+	txq->skb[txq->tail] = skb;
 
-	tx = txq->tx_desc_area + txq->tx_tail;
+	tx = txq->txd + txq->tail;
 	tx->data_rate = txdatarate;
 	tx->tx_priority = index;
 	tx->qos_control = cpu_to_le16(qos);
@@ -1340,15 +1486,15 @@
 	wmb();
 	tx->status = cpu_to_le32(MWL8K_TXD_STATUS_FW_OWNED | txstatus);
 
-	txq->tx_stats.count++;
-	txq->tx_stats.len++;
+	txq->stats.count++;
+	txq->stats.len++;
 	priv->pending_tx_pkts++;
 
-	txq->tx_tail++;
-	if (txq->tx_tail == MWL8K_TX_DESCS)
-		txq->tx_tail = 0;
+	txq->tail++;
+	if (txq->tail == MWL8K_TX_DESCS)
+		txq->tail = 0;
 
-	if (txq->tx_head == txq->tx_tail)
+	if (txq->head == txq->tail)
 		ieee80211_stop_queue(hw, index);
 
 	mwl8k_tx_start(priv);
@@ -1431,7 +1577,7 @@
 	unsigned long timeout = 0;
 	u8 buf[32];
 
-	cmd->result = 0xFFFF;
+	cmd->result = 0xffff;
 	dma_size = le16_to_cpu(cmd->length);
 	dma_addr = pci_map_single(priv->pdev, cmd, dma_size,
 				  PCI_DMA_BIDIRECTIONAL);
@@ -1464,7 +1610,7 @@
 
 	if (!timeout) {
 		printk(KERN_ERR "%s: Command %s timeout after %u ms\n",
-		       priv->name,
+		       wiphy_name(hw->wiphy),
 		       mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
 		       MWL8K_CMD_TIMEOUT_MS);
 		rc = -ETIMEDOUT;
@@ -1472,7 +1618,7 @@
 		rc = cmd->result ? -EINVAL : 0;
 		if (rc)
 			printk(KERN_ERR "%s: Command %s error 0x%x\n",
-			       priv->name,
+			       wiphy_name(hw->wiphy),
 			       mwl8k_cmd_name(cmd->code, buf, sizeof(buf)),
 			       le16_to_cpu(cmd->result));
 	}
@@ -1481,9 +1627,9 @@
 }
 
 /*
- * GET_HW_SPEC.
+ * CMD_GET_HW_SPEC (STA version).
  */
-struct mwl8k_cmd_get_hw_spec {
+struct mwl8k_cmd_get_hw_spec_sta {
 	struct mwl8k_cmd_pkt header;
 	__u8 hw_rev;
 	__u8 host_interface;
@@ -1499,13 +1645,13 @@
 	__le32 tx_queue_ptrs[MWL8K_TX_QUEUES];
 	__le32 caps2;
 	__le32 num_tx_desc_per_queue;
-	__le32 total_rx_desc;
+	__le32 total_rxd;
 } __attribute__((packed));
 
-static int mwl8k_cmd_get_hw_spec(struct ieee80211_hw *hw)
+static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_get_hw_spec *cmd;
+	struct mwl8k_cmd_get_hw_spec_sta *cmd;
 	int rc;
 	int i;
 
@@ -1518,12 +1664,12 @@
 
 	memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
 	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
-	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rx_desc_dma);
+	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma);
 	cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
-		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].tx_desc_dma);
+		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma);
 	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
-	cmd->total_rx_desc = cpu_to_le32(MWL8K_RX_DESCS);
+	cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 
@@ -1539,6 +1685,129 @@
 }
 
 /*
+ * CMD_GET_HW_SPEC (AP version).
+ */
+struct mwl8k_cmd_get_hw_spec_ap {
+	struct mwl8k_cmd_pkt header;
+	__u8 hw_rev;
+	__u8 host_interface;
+	__le16 num_wcb;
+	__le16 num_mcaddrs;
+	__u8 perm_addr[ETH_ALEN];
+	__le16 region_code;
+	__le16 num_antenna;
+	__le32 fw_rev;
+	__le32 wcbbase0;
+	__le32 rxwrptr;
+	__le32 rxrdptr;
+	__le32 ps_cookie;
+	__le32 wcbbase1;
+	__le32 wcbbase2;
+	__le32 wcbbase3;
+} __attribute__((packed));
+
+static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_get_hw_spec_ap *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_HW_SPEC);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+	memset(cmd->perm_addr, 0xff, sizeof(cmd->perm_addr));
+	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+
+	if (!rc) {
+		int off;
+
+		SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr);
+		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
+		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
+		priv->hw_rev = cmd->hw_rev;
+
+		off = le32_to_cpu(cmd->wcbbase0) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[0].txd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->rxwrptr) & 0xffff;
+		iowrite32(cpu_to_le32(priv->rxq[0].rxd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->rxrdptr) & 0xffff;
+		iowrite32(cpu_to_le32(priv->rxq[0].rxd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->wcbbase1) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[1].txd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->wcbbase2) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[2].txd_dma), priv->sram + off);
+
+		off = le32_to_cpu(cmd->wcbbase3) & 0xffff;
+		iowrite32(cpu_to_le32(priv->txq[3].txd_dma), priv->sram + off);
+	}
+
+	kfree(cmd);
+	return rc;
+}
+
+/*
+ * CMD_SET_HW_SPEC.
+ */
+struct mwl8k_cmd_set_hw_spec {
+	struct mwl8k_cmd_pkt header;
+	__u8 hw_rev;
+	__u8 host_interface;
+	__le16 num_mcaddrs;
+	__u8 perm_addr[ETH_ALEN];
+	__le16 region_code;
+	__le32 fw_rev;
+	__le32 ps_cookie;
+	__le32 caps;
+	__le32 rx_queue_ptr;
+	__le32 num_tx_queues;
+	__le32 tx_queue_ptrs[MWL8K_TX_QUEUES];
+	__le32 flags;
+	__le32 num_tx_desc_per_queue;
+	__le32 total_rxd;
+} __attribute__((packed));
+
+#define MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT	0x00000080
+
+static int mwl8k_cmd_set_hw_spec(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_set_hw_spec *cmd;
+	int rc;
+	int i;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_HW_SPEC);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+
+	cmd->ps_cookie = cpu_to_le32(priv->cookie_dma);
+	cmd->rx_queue_ptr = cpu_to_le32(priv->rxq[0].rxd_dma);
+	cmd->num_tx_queues = cpu_to_le32(MWL8K_TX_QUEUES);
+	for (i = 0; i < MWL8K_TX_QUEUES; i++)
+		cmd->tx_queue_ptrs[i] = cpu_to_le32(priv->txq[i].txd_dma);
+	cmd->flags = cpu_to_le32(MWL8K_SET_HW_SPEC_FLAG_HOST_DECR_MGMT);
+	cmd->num_tx_desc_per_queue = cpu_to_le32(MWL8K_TX_DESCS);
+	cmd->total_rxd = cpu_to_le32(MWL8K_RX_DESCS);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
  * CMD_MAC_MULTICAST_ADR.
  */
 struct mwl8k_cmd_mac_multicast_adr {
@@ -1548,19 +1817,23 @@
 	__u8 addr[0][ETH_ALEN];
 };
 
-#define MWL8K_ENABLE_RX_MULTICAST 0x000F
+#define MWL8K_ENABLE_RX_DIRECTED	0x0001
+#define MWL8K_ENABLE_RX_MULTICAST	0x0002
+#define MWL8K_ENABLE_RX_ALL_MULTICAST	0x0004
+#define MWL8K_ENABLE_RX_BROADCAST	0x0008
 
 static struct mwl8k_cmd_pkt *
-__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw,
+__mwl8k_cmd_mac_multicast_adr(struct ieee80211_hw *hw, int allmulti,
 			      int mc_count, struct dev_addr_list *mclist)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_mac_multicast_adr *cmd;
 	int size;
-	int i;
 
-	if (mc_count > priv->num_mcaddrs)
-		mc_count = priv->num_mcaddrs;
+	if (allmulti || mc_count > priv->num_mcaddrs) {
+		allmulti = 1;
+		mc_count = 0;
+	}
 
 	size = sizeof(*cmd) + mc_count * ETH_ALEN;
 
@@ -1570,16 +1843,24 @@
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_MAC_MULTICAST_ADR);
 	cmd->header.length = cpu_to_le16(size);
-	cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
-	cmd->numaddr = cpu_to_le16(mc_count);
+	cmd->action = cpu_to_le16(MWL8K_ENABLE_RX_DIRECTED |
+				  MWL8K_ENABLE_RX_BROADCAST);
 
-	for (i = 0; i < mc_count && mclist; i++) {
-		if (mclist->da_addrlen != ETH_ALEN) {
-			kfree(cmd);
-			return NULL;
+	if (allmulti) {
+		cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_ALL_MULTICAST);
+	} else if (mc_count) {
+		int i;
+
+		cmd->action |= cpu_to_le16(MWL8K_ENABLE_RX_MULTICAST);
+		cmd->numaddr = cpu_to_le16(mc_count);
+		for (i = 0; i < mc_count && mclist; i++) {
+			if (mclist->da_addrlen != ETH_ALEN) {
+				kfree(cmd);
+				return NULL;
+			}
+			memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
+			mclist = mclist->next;
 		}
-		memcpy(cmd->addr[i], mclist->da_addr, ETH_ALEN);
-		mclist = mclist->next;
 	}
 
 	return &cmd->header;
@@ -1590,7 +1871,6 @@
  */
 struct mwl8k_cmd_802_11_get_stat {
 	struct mwl8k_cmd_pkt header;
-	__le16 action;
 	__le32 stats[64];
 } __attribute__((packed));
 
@@ -1611,7 +1891,6 @@
 
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_GET_STAT);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
-	cmd->action = cpu_to_le16(MWL8K_CMD_GET);
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	if (!rc) {
@@ -1727,6 +2006,39 @@
 }
 
 /*
+ * CMD_RF_ANTENNA.
+ */
+struct mwl8k_cmd_rf_antenna {
+	struct mwl8k_cmd_pkt header;
+	__le16 antenna;
+	__le16 mode;
+} __attribute__((packed));
+
+#define MWL8K_RF_ANTENNA_RX		1
+#define MWL8K_RF_ANTENNA_TX		2
+
+static int
+mwl8k_cmd_rf_antenna(struct ieee80211_hw *hw, int antenna, int mask)
+{
+	struct mwl8k_cmd_rf_antenna *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_RF_ANTENNA);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->antenna = cpu_to_le16(antenna);
+	cmd->mode = cpu_to_le16(mask);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
  * CMD_SET_PRE_SCAN.
  */
 struct mwl8k_cmd_set_pre_scan {
@@ -1904,6 +2216,46 @@
 }
 
 /*
+ * CMD_SET_MAC_ADDR.
+ */
+struct mwl8k_cmd_set_mac_addr {
+	struct mwl8k_cmd_pkt header;
+	union {
+		struct {
+			__le16 mac_type;
+			__u8 mac_addr[ETH_ALEN];
+		} mbss;
+		__u8 mac_addr[ETH_ALEN];
+	};
+} __attribute__((packed));
+
+static int mwl8k_set_mac_addr(struct ieee80211_hw *hw, u8 *mac)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	struct mwl8k_cmd_set_mac_addr *cmd;
+	int rc;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_MAC_ADDR);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	if (priv->ap_fw) {
+		cmd->mbss.mac_type = 0;
+		memcpy(cmd->mbss.mac_addr, mac, ETH_ALEN);
+	} else {
+		memcpy(cmd->mac_addr, mac, ETH_ALEN);
+	}
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+
+/*
  * CMD_SET_RATEADAPT_MODE.
  */
 struct mwl8k_cmd_set_rate_adapt_mode {
@@ -2005,17 +2357,34 @@
 	/* TX opportunity in units of 32 us */
 	__le16 txop;
 
-	/* Log exponent of max contention period: 0...15*/
-	__u8 log_cw_max;
+	union {
+		struct {
+			/* Log exponent of max contention period: 0...15 */
+			__le32 log_cw_max;
 
-	/* Log exponent of min contention period: 0...15 */
-	__u8 log_cw_min;
+			/* Log exponent of min contention period: 0...15 */
+			__le32 log_cw_min;
 
-	/* Adaptive interframe spacing in units of 32us */
-	__u8 aifs;
+			/* Adaptive interframe spacing in units of 32us */
+			__u8 aifs;
 
-	/* TX queue to configure */
-	__u8 txq;
+			/* TX queue to configure */
+			__u8 txq;
+		} ap;
+		struct {
+			/* Log exponent of max contention period: 0...15 */
+			__u8 log_cw_max;
+
+			/* Log exponent of min contention period: 0...15 */
+			__u8 log_cw_min;
+
+			/* Adaptive interframe spacing in units of 32us */
+			__u8 aifs;
+
+			/* TX queue to configure */
+			__u8 txq;
+		} sta;
+	};
 } __attribute__((packed));
 
 #define MWL8K_SET_EDCA_CW	0x01
@@ -2031,6 +2400,7 @@
 		__u16 cw_min, __u16 cw_max,
 		__u8 aifs, __u16 txop)
 {
+	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_set_edca_params *cmd;
 	int rc;
 
@@ -2038,14 +2408,27 @@
 	if (cmd == NULL)
 		return -ENOMEM;
 
+	/*
+	 * Queues 0 (BE) and 1 (BK) are swapped in hardware for
+	 * this call.
+	 */
+	qnum ^= !(qnum >> 1);
+
 	cmd->header.code = cpu_to_le16(MWL8K_CMD_SET_EDCA_PARAMS);
 	cmd->header.length = cpu_to_le16(sizeof(*cmd));
 	cmd->action = cpu_to_le16(MWL8K_SET_EDCA_ALL);
 	cmd->txop = cpu_to_le16(txop);
-	cmd->log_cw_max = (u8)ilog2(cw_max + 1);
-	cmd->log_cw_min = (u8)ilog2(cw_min + 1);
-	cmd->aifs = aifs;
-	cmd->txq = qnum;
+	if (priv->ap_fw) {
+		cmd->ap.log_cw_max = cpu_to_le32(ilog2(cw_max + 1));
+		cmd->ap.log_cw_min = cpu_to_le32(ilog2(cw_min + 1));
+		cmd->ap.aifs = aifs;
+		cmd->ap.txq = qnum;
+	} else {
+		cmd->sta.log_cw_max = (u8)ilog2(cw_max + 1);
+		cmd->sta.log_cw_min = (u8)ilog2(cw_min + 1);
+		cmd->sta.aifs = aifs;
+		cmd->sta.txq = qnum;
+	}
 
 	rc = mwl8k_post_cmd(hw, &cmd->header);
 	kfree(cmd);
@@ -2093,8 +2476,8 @@
 	/* XXX TBD Might just have to abort and return an error */
 	if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
 		printk(KERN_ERR "%s(): WARNING: Incomplete beacon "
-			"sent to firmware. Sz=%u MAX=%u\n", __func__,
-			payload_len, MWL8K_FJ_BEACON_MAXLEN);
+		       "sent to firmware. Sz=%u MAX=%u\n", __func__,
+		       payload_len, MWL8K_FJ_BEACON_MAXLEN);
 
 	if (payload_len > MWL8K_FJ_BEACON_MAXLEN)
 		payload_len = MWL8K_FJ_BEACON_MAXLEN;
@@ -2341,9 +2724,10 @@
 	cmd->rate_type = cpu_to_le32(rate_type);
 
 	if (rate_table != NULL) {
-		/* Copy over each field manually so
-		* that bitflipping can be done
-		*/
+		/*
+		 * Copy over each field manually so that endian
+		 * conversion can be done.
+		 */
 		cmd->rate_table.allow_rate_drop =
 				cpu_to_le32(rate_table->allow_rate_drop);
 		cmd->rate_table.num_rates =
@@ -2399,7 +2783,7 @@
 
 	if (status & MWL8K_A2H_INT_QUEUE_EMPTY) {
 		if (!mutex_is_locked(&priv->fw_mutex) &&
-		    priv->radio_on && mwl8k_txq_busy(priv))
+		    priv->radio_on && priv->pending_tx_pkts)
 			mwl8k_tx_start(priv);
 	}
 
@@ -2418,7 +2802,7 @@
 
 	if (priv->current_channel == NULL) {
 		printk(KERN_DEBUG "%s: dropped TX frame since radio "
-		       "disabled\n", priv->name);
+		       "disabled\n", wiphy_name(hw->wiphy));
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
@@ -2433,11 +2817,11 @@
 	struct mwl8k_priv *priv = hw->priv;
 	int rc;
 
-	rc = request_irq(priv->pdev->irq, &mwl8k_interrupt,
+	rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
 			 IRQF_SHARED, MWL8K_NAME, hw);
 	if (rc) {
 		printk(KERN_ERR "%s: failed to register IRQ handler\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		return -EIO;
 	}
 
@@ -2451,12 +2835,17 @@
 	if (!rc) {
 		rc = mwl8k_cmd_802_11_radio_enable(hw);
 
-		if (!rc)
-			rc = mwl8k_cmd_set_pre_scan(hw);
+		if (!priv->ap_fw) {
+			if (!rc)
+				rc = mwl8k_enable_sniffer(hw, 0);
 
-		if (!rc)
-			rc = mwl8k_cmd_set_post_scan(hw,
-					"\x00\x00\x00\x00\x00\x00");
+			if (!rc)
+				rc = mwl8k_cmd_set_pre_scan(hw);
+
+			if (!rc)
+				rc = mwl8k_cmd_set_post_scan(hw,
+						"\x00\x00\x00\x00\x00\x00");
+		}
 
 		if (!rc)
 			rc = mwl8k_cmd_setrateadaptmode(hw, 0);
@@ -2464,9 +2853,6 @@
 		if (!rc)
 			rc = mwl8k_set_wmm(hw, 0);
 
-		if (!rc)
-			rc = mwl8k_enable_sniffer(hw, 0);
-
 		mwl8k_fw_unlock(hw);
 	}
 
@@ -2500,9 +2886,6 @@
 	/* Stop tx reclaim tasklet */
 	tasklet_disable(&priv->tx_reclaim_task);
 
-	/* Stop config thread */
-	flush_workqueue(priv->config_wq);
-
 	/* Return all skbs to mac80211 */
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_reclaim(hw, i, 1);
@@ -2526,11 +2909,24 @@
 	if (conf->type != NL80211_IFTYPE_STATION)
 		return -EINVAL;
 
+	/*
+	 * Reject interface creation if sniffer mode is active, as
+	 * STA operation is mutually exclusive with hardware sniffer
+	 * mode.
+	 */
+	if (priv->sniffer_enabled) {
+		printk(KERN_INFO "%s: unable to create STA "
+		       "interface due to sniffer mode being enabled\n",
+		       wiphy_name(hw->wiphy));
+		return -EINVAL;
+	}
+
 	/* Clean out driver private area */
 	mwl8k_vif = MWL8K_VIF(conf->vif);
 	memset(mwl8k_vif, 0, sizeof(*mwl8k_vif));
 
-	/* Save the mac address */
+	/* Set and save the mac address */
+	mwl8k_set_mac_addr(hw, conf->mac_addr);
 	memcpy(mwl8k_vif->mac_addr, conf->mac_addr, ETH_ALEN);
 
 	/* Back pointer to parent config block */
@@ -2558,6 +2954,8 @@
 	if (priv->vif == NULL)
 		return;
 
+	mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+
 	priv->vif = NULL;
 }
 
@@ -2593,8 +2991,13 @@
 	if (rc)
 		goto out;
 
-	if (mwl8k_cmd_mimo_config(hw, 0x7, 0x7))
-		rc = -EINVAL;
+	if (priv->ap_fw) {
+		rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x7);
+		if (!rc)
+			rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_TX, 0x7);
+	} else {
+		rc = mwl8k_cmd_mimo_config(hw, 0x7, 0x7);
+	}
 
 out:
 	mwl8k_fw_unlock(hw);
@@ -2681,32 +3084,108 @@
 {
 	struct mwl8k_cmd_pkt *cmd;
 
-	cmd = __mwl8k_cmd_mac_multicast_adr(hw, mc_count, mclist);
+	/*
+	 * Synthesize and return a command packet that programs the
+	 * hardware multicast address filter.  At this point we don't
+	 * know whether FIF_ALLMULTI is being requested, but if it is,
+	 * we'll end up throwing this packet away and creating a new
+	 * one in mwl8k_configure_filter().
+	 */
+	cmd = __mwl8k_cmd_mac_multicast_adr(hw, 0, mc_count, mclist);
 
 	return (unsigned long)cmd;
 }
 
+static int
+mwl8k_configure_filter_sniffer(struct ieee80211_hw *hw,
+			       unsigned int changed_flags,
+			       unsigned int *total_flags)
+{
+	struct mwl8k_priv *priv = hw->priv;
+
+	/*
+	 * Hardware sniffer mode is mutually exclusive with STA
+	 * operation, so refuse to enable sniffer mode if a STA
+	 * interface is active.
+	 */
+	if (priv->vif != NULL) {
+		if (net_ratelimit())
+			printk(KERN_INFO "%s: not enabling sniffer "
+			       "mode because STA interface is active\n",
+			       wiphy_name(hw->wiphy));
+		return 0;
+	}
+
+	if (!priv->sniffer_enabled) {
+		if (mwl8k_enable_sniffer(hw, 1))
+			return 0;
+		priv->sniffer_enabled = true;
+	}
+
+	*total_flags &=	FIF_PROMISC_IN_BSS | FIF_ALLMULTI |
+			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL |
+			FIF_OTHER_BSS;
+
+	return 1;
+}
+
 static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 				   unsigned int changed_flags,
 				   unsigned int *total_flags,
 				   u64 multicast)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct mwl8k_cmd_pkt *multicast_adr_cmd;
+	struct mwl8k_cmd_pkt *cmd = (void *)(unsigned long)multicast;
+
+	/*
+	 * AP firmware doesn't allow fine-grained control over
+	 * the receive filter.
+	 */
+	if (priv->ap_fw) {
+		*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
+		kfree(cmd);
+		return;
+	}
+
+	/*
+	 * Enable hardware sniffer mode if FIF_CONTROL or
+	 * FIF_OTHER_BSS is requested.
+	 */
+	if (*total_flags & (FIF_CONTROL | FIF_OTHER_BSS) &&
+	    mwl8k_configure_filter_sniffer(hw, changed_flags, total_flags)) {
+		kfree(cmd);
+		return;
+	}
 
 	/* Clear unsupported feature flags */
-	*total_flags &= FIF_BCN_PRBRESP_PROMISC;
+	*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
 
 	if (mwl8k_fw_lock(hw))
 		return;
 
+	if (priv->sniffer_enabled) {
+		mwl8k_enable_sniffer(hw, 0);
+		priv->sniffer_enabled = false;
+	}
+
 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
-		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+		if (*total_flags & FIF_BCN_PRBRESP_PROMISC) {
+			/*
+			 * Disable the BSS filter.
+			 */
 			mwl8k_cmd_set_pre_scan(hw);
-		else {
+		} else {
 			u8 *bssid;
 
-			bssid = "\x00\x00\x00\x00\x00\x00";
+			/*
+			 * Enable the BSS filter.
+			 *
+			 * If there is an active STA interface, use that
+			 * interface's BSSID, otherwise use a dummy one
+			 * (where the OUI part needs to be nonzero for
+			 * the BSSID to be accepted by POST_SCAN).
+			 */
+			bssid = "\x01\x00\x00\x00\x00\x00";
 			if (priv->vif != NULL)
 				bssid = MWL8K_VIF(priv->vif)->bssid;
 
@@ -2714,10 +3193,20 @@
 		}
 	}
 
-	multicast_adr_cmd = (void *)(unsigned long)multicast;
-	if (multicast_adr_cmd != NULL) {
-		mwl8k_post_cmd(hw, multicast_adr_cmd);
-		kfree(multicast_adr_cmd);
+	/*
+	 * If FIF_ALLMULTI is being requested, throw away the command
+	 * packet that ->prepare_multicast() built and replace it with
+	 * a command packet that enables reception of all multicast
+	 * packets.
+	 */
+	if (*total_flags & FIF_ALLMULTI) {
+		kfree(cmd);
+		cmd = __mwl8k_cmd_mac_multicast_adr(hw, 1, 0, NULL);
+	}
+
+	if (cmd != NULL) {
+		mwl8k_post_cmd(hw, cmd);
+		kfree(cmd);
 	}
 
 	mwl8k_fw_unlock(hw);
@@ -2762,7 +3251,7 @@
 	spin_lock_bh(&priv->tx_lock);
 	for (index = 0; index < MWL8K_TX_QUEUES; index++) {
 		txq = priv->txq + index;
-		memcpy(&stats[index], &txq->tx_stats,
+		memcpy(&stats[index], &txq->stats,
 			sizeof(struct ieee80211_tx_queue_stats));
 	}
 	spin_unlock_bh(&priv->tx_lock);
@@ -2802,7 +3291,7 @@
 	for (i = 0; i < MWL8K_TX_QUEUES; i++)
 		mwl8k_txq_reclaim(hw, i, 0);
 
-	if (priv->tx_wait != NULL && mwl8k_txq_busy(priv) == 0) {
+	if (priv->tx_wait != NULL && !priv->pending_tx_pkts) {
 		complete(priv->tx_wait);
 		priv->tx_wait = NULL;
 	}
@@ -2822,6 +3311,36 @@
 	priv->beacon_skb = NULL;
 }
 
+enum {
+	MWL8687 = 0,
+	MWL8366,
+};
+
+static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
+	{
+		.part_name	= "88w8687",
+		.helper_image	= "mwl8k/helper_8687.fw",
+		.fw_image	= "mwl8k/fmimage_8687.fw",
+		.rxd_ops	= &rxd_8687_ops,
+		.modes		= BIT(NL80211_IFTYPE_STATION),
+	},
+	{
+		.part_name	= "88w8366",
+		.helper_image	= "mwl8k/helper_8366.fw",
+		.fw_image	= "mwl8k/fmimage_8366.fw",
+		.rxd_ops	= &rxd_8366_ops,
+		.modes		= 0,
+	},
+};
+
+static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
+	{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, },
+	{ PCI_VDEVICE(MARVELL, 0x2a30), .driver_data = MWL8687, },
+	{ PCI_VDEVICE(MARVELL, 0x2a40), .driver_data = MWL8366, },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, mwl8k_pci_id_table);
+
 static int __devinit mwl8k_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
@@ -2862,17 +3381,34 @@
 	priv = hw->priv;
 	priv->hw = hw;
 	priv->pdev = pdev;
+	priv->device_info = &mwl8k_info_tbl[id->driver_data];
+	priv->rxd_ops = priv->device_info->rxd_ops;
+	priv->sniffer_enabled = false;
 	priv->wmm_enabled = false;
 	priv->pending_tx_pkts = 0;
-	strncpy(priv->name, MWL8K_NAME, sizeof(priv->name));
 
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 	pci_set_drvdata(pdev, hw);
 
+	priv->sram = pci_iomap(pdev, 0, 0x10000);
+	if (priv->sram == NULL) {
+		printk(KERN_ERR "%s: Cannot map device SRAM\n",
+		       wiphy_name(hw->wiphy));
+		goto err_iounmap;
+	}
+
+	/*
+	 * If BAR0 is a 32 bit BAR, the register BAR will be BAR1.
+	 * If BAR0 is a 64 bit BAR, the register BAR will be BAR2.
+	 */
 	priv->regs = pci_iomap(pdev, 1, 0x10000);
 	if (priv->regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map device memory\n", priv->name);
-		goto err_iounmap;
+		priv->regs = pci_iomap(pdev, 2, 0x10000);
+		if (priv->regs == NULL) {
+			printk(KERN_ERR "%s: Cannot map device registers\n",
+			       wiphy_name(hw->wiphy));
+			goto err_iounmap;
+		}
 	}
 
 	memcpy(priv->channels, mwl8k_channels, sizeof(mwl8k_channels));
@@ -2897,7 +3433,7 @@
 
 	hw->queues = MWL8K_TX_QUEUES;
 
-	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	hw->wiphy->interface_modes = priv->device_info->modes;
 
 	/* Set rssi and noise values to dBm */
 	hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM;
@@ -2916,11 +3452,6 @@
 			mwl8k_tx_reclaim_handler, (unsigned long)hw);
 	tasklet_disable(&priv->tx_reclaim_task);
 
-	/* Config workthread */
-	priv->config_wq = create_singlethread_workqueue("mwl8k_config");
-	if (priv->config_wq == NULL)
-		goto err_iounmap;
-
 	/* Power management cookie */
 	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
 	if (priv->cookie == NULL)
@@ -2934,11 +3465,12 @@
 	mutex_init(&priv->fw_mutex);
 	priv->fw_mutex_owner = NULL;
 	priv->fw_mutex_depth = 0;
-	priv->tx_wait = NULL;
 	priv->hostcmd_wait = NULL;
 
 	spin_lock_init(&priv->tx_lock);
 
+	priv->tx_wait = NULL;
+
 	for (i = 0; i < MWL8K_TX_QUEUES; i++) {
 		rc = mwl8k_txq_init(hw, i);
 		if (rc)
@@ -2950,11 +3482,11 @@
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_CLEAR_SEL);
 	iowrite32(0xffffffff, priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK);
 
-	rc = request_irq(priv->pdev->irq, &mwl8k_interrupt,
+	rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
 			 IRQF_SHARED, MWL8K_NAME, hw);
 	if (rc) {
 		printk(KERN_ERR "%s: failed to register IRQ handler\n",
-		       priv->name);
+		       wiphy_name(hw->wiphy));
 		goto err_free_queues;
 	}
 
@@ -2962,16 +3494,18 @@
 	mwl8k_hw_reset(priv);
 
 	/* Ask userland hotplug daemon for the device firmware */
-	rc = mwl8k_request_firmware(priv, (u32)id->driver_data);
+	rc = mwl8k_request_firmware(priv);
 	if (rc) {
-		printk(KERN_ERR "%s: Firmware files not found\n", priv->name);
+		printk(KERN_ERR "%s: Firmware files not found\n",
+		       wiphy_name(hw->wiphy));
 		goto err_free_irq;
 	}
 
 	/* Load firmware into hardware */
-	rc = mwl8k_load_firmware(priv);
+	rc = mwl8k_load_firmware(hw);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot start firmware\n", priv->name);
+		printk(KERN_ERR "%s: Cannot start firmware\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
@@ -2986,16 +3520,31 @@
 	iowrite32(MWL8K_A2H_EVENTS, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
 
 	/* Get config data, mac addrs etc */
-	rc = mwl8k_cmd_get_hw_spec(hw);
+	if (priv->ap_fw) {
+		rc = mwl8k_cmd_get_hw_spec_ap(hw);
+		if (!rc)
+			rc = mwl8k_cmd_set_hw_spec(hw);
+	} else {
+		rc = mwl8k_cmd_get_hw_spec_sta(hw);
+	}
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot initialise firmware\n", priv->name);
+		printk(KERN_ERR "%s: Cannot initialise firmware\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
 	/* Turn radio off */
 	rc = mwl8k_cmd_802_11_radio_disable(hw);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot disable\n", priv->name);
+		printk(KERN_ERR "%s: Cannot disable\n", wiphy_name(hw->wiphy));
+		goto err_stop_firmware;
+	}
+
+	/* Clear MAC address */
+	rc = mwl8k_set_mac_addr(hw, "\x00\x00\x00\x00\x00\x00");
+	if (rc) {
+		printk(KERN_ERR "%s: Cannot clear MAC address\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
@@ -3005,13 +3554,15 @@
 
 	rc = ieee80211_register_hw(hw);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot register device\n", priv->name);
+		printk(KERN_ERR "%s: Cannot register device\n",
+		       wiphy_name(hw->wiphy));
 		goto err_stop_firmware;
 	}
 
-	printk(KERN_INFO "%s: 88w%u v%d, %pM, firmware version %u.%u.%u.%u\n",
-	       wiphy_name(hw->wiphy), priv->part_num, priv->hw_rev,
-	       hw->wiphy->perm_addr,
+	printk(KERN_INFO "%s: %s v%d, %pM, %s firmware %u.%u.%u.%u\n",
+	       wiphy_name(hw->wiphy), priv->device_info->part_name,
+	       priv->hw_rev, hw->wiphy->perm_addr,
+	       priv->ap_fw ? "AP" : "STA",
 	       (priv->fw_rev >> 24) & 0xff, (priv->fw_rev >> 16) & 0xff,
 	       (priv->fw_rev >> 8) & 0xff, priv->fw_rev & 0xff);
 
@@ -3038,8 +3589,8 @@
 	if (priv->regs != NULL)
 		pci_iounmap(pdev, priv->regs);
 
-	if (priv->config_wq != NULL)
-		destroy_workqueue(priv->config_wq);
+	if (priv->sram != NULL)
+		pci_iounmap(pdev, priv->sram);
 
 	pci_set_drvdata(pdev, NULL);
 	ieee80211_free_hw(hw);
@@ -3073,9 +3624,6 @@
 	/* Remove tx reclaim tasklet */
 	tasklet_kill(&priv->tx_reclaim_task);
 
-	/* Stop config thread */
-	destroy_workqueue(priv->config_wq);
-
 	/* Stop hardware */
 	mwl8k_hw_reset(priv);
 
@@ -3088,10 +3636,10 @@
 
 	mwl8k_rxq_deinit(hw, 0);
 
-	pci_free_consistent(priv->pdev, 4,
-				priv->cookie, priv->cookie_dma);
+	pci_free_consistent(priv->pdev, 4, priv->cookie, priv->cookie_dma);
 
 	pci_iounmap(pdev, priv->regs);
+	pci_iounmap(pdev, priv->sram);
 	pci_set_drvdata(pdev, NULL);
 	ieee80211_free_hw(hw);
 	pci_release_regions(pdev);
@@ -3100,7 +3648,7 @@
 
 static struct pci_driver mwl8k_driver = {
 	.name		= MWL8K_NAME,
-	.id_table	= mwl8k_table,
+	.id_table	= mwl8k_pci_id_table,
 	.probe		= mwl8k_probe,
 	.remove		= __devexit_p(mwl8k_remove),
 	.shutdown	= __devexit_p(mwl8k_shutdown),
@@ -3118,3 +3666,8 @@
 
 module_init(mwl8k_init);
 module_exit(mwl8k_exit);
+
+MODULE_DESCRIPTION(MWL8K_DESC);
+MODULE_VERSION(MWL8K_VERSION);
+MODULE_AUTHOR("Lennert Buytenhek <buytenh@marvell.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
deleted file mode 100644
index 9498b46..0000000
--- a/drivers/net/wireless/netwave_cs.c
+++ /dev/null
@@ -1,1389 +0,0 @@
-/*********************************************************************
- *                
- * Filename:      netwave_cs.c
- * Version:       0.4.1
- * Description:   Netwave AirSurfer Wireless LAN PC Card driver
- * Status:        Experimental.
- * Authors:       John Markus Bjørndalen <johnm@cs.uit.no>
- *                Dag Brattli <dagb@cs.uit.no>
- *                David Hinds <dahinds@users.sourceforge.net>
- * Created at:    A long time ago!
- * Modified at:   Mon Nov 10 11:54:37 1997
- * Modified by:   Dag Brattli <dagb@cs.uit.no>
- * 
- *     Copyright (c) 1997 University of Tromsø, Norway
- *
- * Revision History:
- *
- *   08-Nov-97 15:14:47   John Markus Bjørndalen <johnm@cs.uit.no>
- *    - Fixed some bugs in netwave_rx and cleaned it up a bit. 
- *      (One of the bugs would have destroyed packets when receiving
- *      multiple packets per interrupt). 
- *    - Cleaned up parts of newave_hw_xmit. 
- *    - A few general cleanups. 
- *   24-Oct-97 13:17:36   Dag Brattli <dagb@cs.uit.no>
- *    - Fixed netwave_rx receive function (got updated docs)
- *   Others:
- *    - Changed name from xircnw to netwave, take a look at 
- *      http://www.netwave-wireless.com
- *    - Some reorganizing of the code
- *    - Removed possible race condition between interrupt handler and transmit
- *      function
- *    - Started to add wireless extensions, but still needs some coding
- *    - Added watchdog for better handling of transmission timeouts 
- *      (hopefully this works better)
- ********************************************************************/
-
-/* To have statistics (just packets sent) define this */
-#undef NETWAVE_STATS
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/mem_op.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#define NETWAVE_REGOFF         0x8000
-/* The Netwave IO registers, offsets to iobase */
-#define NETWAVE_REG_COR        0x0
-#define NETWAVE_REG_CCSR       0x2
-#define NETWAVE_REG_ASR        0x4
-#define NETWAVE_REG_IMR        0xa
-#define NETWAVE_REG_PMR        0xc
-#define NETWAVE_REG_IOLOW      0x6
-#define NETWAVE_REG_IOHI       0x7
-#define NETWAVE_REG_IOCONTROL  0x8
-#define NETWAVE_REG_DATA       0xf
-/* The Netwave Extended IO registers, offsets to RamBase */
-#define NETWAVE_EREG_ASCC      0x114
-#define NETWAVE_EREG_RSER      0x120
-#define NETWAVE_EREG_RSERW     0x124
-#define NETWAVE_EREG_TSER      0x130
-#define NETWAVE_EREG_TSERW     0x134
-#define NETWAVE_EREG_CB        0x100
-#define NETWAVE_EREG_SPCQ      0x154
-#define NETWAVE_EREG_SPU       0x155
-#define NETWAVE_EREG_LIF       0x14e
-#define NETWAVE_EREG_ISPLQ     0x156
-#define NETWAVE_EREG_HHC       0x158
-#define NETWAVE_EREG_NI        0x16e
-#define NETWAVE_EREG_MHS       0x16b
-#define NETWAVE_EREG_TDP       0x140
-#define NETWAVE_EREG_RDP       0x150
-#define NETWAVE_EREG_PA        0x160
-#define NETWAVE_EREG_EC        0x180
-#define NETWAVE_EREG_CRBP      0x17a
-#define NETWAVE_EREG_ARW       0x166
-
-/*
- * Commands used in the extended command buffer
- * NETWAVE_EREG_CB (0x100-0x10F) 
- */
-#define NETWAVE_CMD_NOP        0x00
-#define NETWAVE_CMD_SRC        0x01
-#define NETWAVE_CMD_STC        0x02
-#define NETWAVE_CMD_AMA        0x03
-#define NETWAVE_CMD_DMA        0x04
-#define NETWAVE_CMD_SAMA       0x05
-#define NETWAVE_CMD_ER         0x06
-#define NETWAVE_CMD_DR         0x07
-#define NETWAVE_CMD_TL         0x08
-#define NETWAVE_CMD_SRP        0x09
-#define NETWAVE_CMD_SSK        0x0a
-#define NETWAVE_CMD_SMD        0x0b
-#define NETWAVE_CMD_SAPD       0x0c
-#define NETWAVE_CMD_SSS        0x11
-/* End of Command marker */
-#define NETWAVE_CMD_EOC        0x00
-
-/* ASR register bits */
-#define NETWAVE_ASR_RXRDY   0x80
-#define NETWAVE_ASR_TXBA    0x01
-
-#define TX_TIMEOUT		((32*HZ)/100)
-
-static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */
-static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */
-
-static const unsigned int corConfIENA   = 0x01; /* Interrupt enable */
-static const unsigned int corConfLVLREQ = 0x40; /* Keep high */
-
-static const unsigned int rxConfRxEna  = 0x80; /* Receive Enable */
-static const unsigned int rxConfMAC    = 0x20; /* MAC host receive mode*/ 
-static const unsigned int rxConfPro    = 0x10; /* Promiscuous */
-static const unsigned int rxConfAMP    = 0x08; /* Accept Multicast Packets */
-static const unsigned int rxConfBcast  = 0x04; /* Accept Broadcast Packets */
-
-static const unsigned int txConfTxEna  = 0x80; /* Transmit Enable */
-static const unsigned int txConfMAC    = 0x20; /* Host sends MAC mode */
-static const unsigned int txConfEUD    = 0x10; /* Enable Uni-Data packets */
-static const unsigned int txConfKey    = 0x02; /* Scramble data packets */
-static const unsigned int txConfLoop   = 0x01; /* Loopback mode */
-
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
-
-/* Parameters that can be set with 'insmod' */
-
-/* Choose the domain, default is 0x100 */
-static u_int  domain = 0x100;
-
-/* Scramble key, range from 0x0 to 0xffff.  
- * 0x0 is no scrambling. 
- */
-static u_int  scramble_key = 0x0;
-
-/* Shared memory speed, in ns. The documentation states that 
- * the card should not be read faster than every 400ns. 
- * This timing should be provided by the HBA. If it becomes a 
- * problem, try setting mem_speed to 400. 
- */
-static int mem_speed;
-
-module_param(domain, int, 0);
-module_param(scramble_key, int, 0);
-module_param(mem_speed, int, 0);
-
-/*====================================================================*/
-
-/* PCMCIA (Card Services) related functions */
-static void netwave_release(struct pcmcia_device *link);     /* Card removal */
-static int netwave_pcmcia_config(struct pcmcia_device *arg); /* Runs after card
-													   insertion */
-static void netwave_detach(struct pcmcia_device *p_dev);    /* Destroy instance */
-
-/* Hardware configuration */
-static void netwave_doreset(unsigned int iobase, u_char __iomem *ramBase);
-static void netwave_reset(struct net_device *dev);
-
-/* Misc device stuff */
-static int netwave_open(struct net_device *dev);  /* Open the device */
-static int netwave_close(struct net_device *dev); /* Close the device */
-
-/* Packet transmission and Packet reception */
-static netdev_tx_t netwave_start_xmit( struct sk_buff *skb,
-					     struct net_device *dev);
-static int netwave_rx( struct net_device *dev);
-
-/* Interrupt routines */
-static irqreturn_t netwave_interrupt(int irq, void *dev_id);
-static void netwave_watchdog(struct net_device *);
-
-/* Wireless extensions */
-static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
-
-static void set_multicast_list(struct net_device *dev);
-
-/*
-   A struct pcmcia_device structure has fields for most things that are needed
-   to keep track of a socket, but there will usually be some device
-   specific information that also needs to be kept track of.  The
-   'priv' pointer in a struct pcmcia_device structure can be used to point to
-   a device-specific private data structure, like this.
-
-   A driver needs to provide a dev_node_t structure for each device
-   on a card.  In some cases, there is only one device per card (for
-   example, ethernet cards, modems).  In other cases, there may be
-   many actual or logical devices (SCSI adapters, memory cards with
-   multiple partitions).  The dev_node_t structures need to be kept
-   in a linked list starting at the 'dev' field of a struct pcmcia_device
-   structure.  We allocate them in the card's private data structure,
-   because they generally can't be allocated dynamically.
-*/
-
-static const struct iw_handler_def	netwave_handler_def;
-
-#define SIOCGIPSNAP	SIOCIWFIRSTPRIV	+ 1	/* Site Survey Snapshot */
-
-#define MAX_ESA 10
-
-typedef struct net_addr {
-    u_char addr48[6];
-} net_addr;
-
-struct site_survey {
-    u_short length;
-    u_char  struct_revision;
-    u_char  roaming_state;
-	
-    u_char  sp_existsFlag;
-    u_char  sp_link_quality;
-    u_char  sp_max_link_quality;
-    u_char  linkQualityGoodFairBoundary;
-    u_char  linkQualityFairPoorBoundary;
-    u_char  sp_utilization;
-    u_char  sp_goodness;
-    u_char  sp_hotheadcount;
-    u_char  roaming_condition;
-	
-    net_addr sp;
-    u_char   numAPs;
-    net_addr nearByAccessPoints[MAX_ESA];
-};	
-   
-typedef struct netwave_private {
-	struct pcmcia_device	*p_dev;
-    spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
-    dev_node_t node;
-    u_char     __iomem *ramBase;
-    int        timeoutCounter;
-    int        lastExec;
-    struct timer_list      watchdog;	/* To avoid blocking state */
-    struct site_survey     nss;
-    struct iw_statistics   iw_stats;    /* Wireless stats */
-} netwave_private;
-
-/*
- * The Netwave card is little-endian, so won't work for big endian
- * systems.
- */
-static inline unsigned short get_uint16(u_char __iomem *staddr) 
-{
-    return readw(staddr); /* Return only 16 bits */
-}
-
-static inline short get_int16(u_char __iomem * staddr)
-{
-    return readw(staddr);
-}
-
-/* 
- * Wait until the WOC (Write Operation Complete) bit in the 
- * ASR (Adapter Status Register) is asserted. 
- * This should have aborted if it takes too long time. 
- */
-static inline void wait_WOC(unsigned int iobase)
-{
-    /* Spin lock */
-    while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; 
-}
-
-static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, 
-			     unsigned int iobase) {
-    u_short resultBuffer;
-
-    /* if time since last snapshot is > 1 sec. (100 jiffies?)  then take 
-     * new snapshot, else return cached data. This is the recommended rate.  
-     */
-    if ( jiffies - priv->lastExec > 100) { 
-	/* Take site survey  snapshot */ 
-	/*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies -
-	  priv->lastExec); */
-	wait_WOC(iobase); 
-	writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0); 
-	writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); 
-	wait_WOC(iobase); 
-
-	/* Get result and copy to cach */ 
-	resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP); 
-	copy_from_pc( &priv->nss, ramBase+resultBuffer, 
-		      sizeof(struct site_survey)); 
-    } 
-}
-
-/*
- * Function netwave_get_wireless_stats (dev)
- *
- *    Wireless extensions statistics
- *
- */
-static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
-{	
-    unsigned long flags;
-    unsigned int iobase = dev->base_addr;
-    netwave_private *priv = netdev_priv(dev);
-    u_char __iomem *ramBase = priv->ramBase;
-    struct iw_statistics* wstats;
-	
-    wstats = &priv->iw_stats;
-
-    spin_lock_irqsave(&priv->spinlock, flags);
-	
-    netwave_snapshot( priv, ramBase, iobase);
-
-    wstats->status = priv->nss.roaming_state;
-    wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ); 
-    wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ);
-    wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f;
-    wstats->discard.nwid = 0L;
-    wstats->discard.code = 0L;
-    wstats->discard.misc = 0L;
-
-    spin_unlock_irqrestore(&priv->spinlock, flags);
-    
-    return &priv->iw_stats;
-}
-
-static const struct net_device_ops netwave_netdev_ops = {
-	.ndo_open	 	= netwave_open,
-	.ndo_stop		= netwave_close,
-	.ndo_start_xmit		= netwave_start_xmit,
-	.ndo_set_multicast_list = set_multicast_list,
-	.ndo_tx_timeout		= netwave_watchdog,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/*
- * Function netwave_attach (void)
- *
- *     Creates an "instance" of the driver, allocating local data 
- *     structures for one device.  The device is registered with Card 
- *     Services.
- *
- *     The dev_link structure is initialized, but we don't actually
- *     configure the card at this point -- we wait until we receive a
- *     card insertion event.
- */
-static int netwave_probe(struct pcmcia_device *link)
-{
-    struct net_device *dev;
-    netwave_private *priv;
-
-    DEBUG(0, "netwave_attach()\n");
-
-    /* Initialize the struct pcmcia_device structure */
-    dev = alloc_etherdev(sizeof(netwave_private));
-    if (!dev)
-	return -ENOMEM;
-    priv = netdev_priv(dev);
-    priv->p_dev = link;
-    link->priv = dev;
-
-    /* The io structure describes IO port mapping */
-    link->io.NumPorts1 = 16;
-    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-    /* link->io.NumPorts2 = 16; 
-       link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
-    link->io.IOAddrLines = 5;
-    
-    /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
-    link->irq.Handler = &netwave_interrupt;
-    
-    /* General socket configuration */
-    link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.IntType = INT_MEMORY_AND_IO;
-    link->conf.ConfigIndex = 1;
-
-    /* Netwave private struct init. link/dev/node already taken care of,
-     * other stuff zero'd - Jean II */
-    spin_lock_init(&priv->spinlock);
-
-    /* Netwave specific entries in the device structure */
-    dev->netdev_ops = &netwave_netdev_ops;
-    /* wireless extensions */
-    dev->wireless_handlers = &netwave_handler_def;
-
-    dev->watchdog_timeo = TX_TIMEOUT;
-
-    link->irq.Instance = dev;
-
-    return netwave_pcmcia_config( link);
-} /* netwave_attach */
-
-/*
- * Function netwave_detach (link)
- *
- *    This deletes a driver "instance".  The device is de-registered
- *    with Card Services.  If it has been released, all local data
- *    structures are freed.  Otherwise, the structures will be freed
- *    when the device is released.
- */
-static void netwave_detach(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	DEBUG(0, "netwave_detach(0x%p)\n", link);
-
-	netwave_release(link);
-
-	if (link->dev_node)
-		unregister_netdev(dev);
-
-	free_netdev(dev);
-} /* netwave_detach */
-
-/*
- * Wireless Handler : get protocol name
- */
-static int netwave_get_name(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	strcpy(wrqu->name, "Netwave");
-	return 0;
-}
-
-/*
- * Wireless Handler : set Network ID
- */
-static int netwave_set_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long flags;
-	unsigned int iobase = dev->base_addr;
-	netwave_private *priv = netdev_priv(dev);
-	u_char __iomem *ramBase = priv->ramBase;
-
-	/* Disable interrupts & save flags */
-	spin_lock_irqsave(&priv->spinlock, flags);
-
-	if(!wrqu->nwid.disabled) {
-	    domain = wrqu->nwid.value;
-	    printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", 
-		    (domain >> 8) & 0x01, domain & 0xff);
-	    wait_WOC(iobase);
-	    writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
-	    writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
-	    writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2);
-	    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-	}
-
-	/* ReEnable interrupts & restore flags */
-	spin_unlock_irqrestore(&priv->spinlock, flags);
-    
-	return 0;
-}
-
-/*
- * Wireless Handler : get Network ID
- */
-static int netwave_get_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	wrqu->nwid.value = domain;
-	wrqu->nwid.disabled = 0;
-	wrqu->nwid.fixed = 1;
-	return 0;
-}
-
-/*
- * Wireless Handler : set scramble key
- */
-static int netwave_set_scramble(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu,
-				char *key)
-{
-	unsigned long flags;
-	unsigned int iobase = dev->base_addr;
-	netwave_private *priv = netdev_priv(dev);
-	u_char __iomem *ramBase = priv->ramBase;
-
-	/* Disable interrupts & save flags */
-	spin_lock_irqsave(&priv->spinlock, flags);
-
-	scramble_key = (key[0] << 8) | key[1];
-	wait_WOC(iobase);
-	writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
-	writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
-	writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
-	writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
-	/* ReEnable interrupts & restore flags */
-	spin_unlock_irqrestore(&priv->spinlock, flags);
-    
-	return 0;
-}
-
-/*
- * Wireless Handler : get scramble key
- */
-static int netwave_get_scramble(struct net_device *dev,
-				struct iw_request_info *info,
-				union iwreq_data *wrqu,
-				char *key)
-{
-	key[1] = scramble_key & 0xff;
-	key[0] = (scramble_key>>8) & 0xff;
-	wrqu->encoding.flags = IW_ENCODE_ENABLED;
-	wrqu->encoding.length = 2;
-	return 0;
-}
-
-/*
- * Wireless Handler : get mode
- */
-static int netwave_get_mode(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	if(domain & 0x100)
-		wrqu->mode = IW_MODE_INFRA;
-	else
-		wrqu->mode = IW_MODE_ADHOC;
-
-	return 0;
-}
-
-/*
- * Wireless Handler : get range info
- */
-static int netwave_get_range(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	struct iw_range *range = (struct iw_range *) extra;
-	int ret = 0;
-
-	/* Set the length (very important for backward compatibility) */
-	wrqu->data.length = sizeof(struct iw_range);
-
-	/* Set all the info we don't care or don't know about to zero */
-	memset(range, 0, sizeof(struct iw_range));
-
-	/* Set the Wireless Extension versions */
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 9;	/* Nothing for us in v10 and v11 */
-		   
-	/* Set information in the range struct */
-	range->throughput = 450 * 1000;	/* don't argue on this ! */
-	range->min_nwid = 0x0000;
-	range->max_nwid = 0x01FF;
-
-	range->num_channels = range->num_frequency = 0;
-		   
-	range->sensitivity = 0x3F;
-	range->max_qual.qual = 255;
-	range->max_qual.level = 255;
-	range->max_qual.noise = 0;
-		   
-	range->num_bitrates = 1;
-	range->bitrate[0] = 1000000;	/* 1 Mb/s */
-
-	range->encoding_size[0] = 2;		/* 16 bits scrambling */
-	range->num_encoding_sizes = 1;
-	range->max_encoding_tokens = 1;	/* Only one key possible */
-
-	return ret;
-}
-
-/*
- * Wireless Private Handler : get snapshot
- */
-static int netwave_get_snap(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long flags;
-	unsigned int iobase = dev->base_addr;
-	netwave_private *priv = netdev_priv(dev);
-	u_char __iomem *ramBase = priv->ramBase;
-
-	/* Disable interrupts & save flags */
-	spin_lock_irqsave(&priv->spinlock, flags);
-
-	/* Take snapshot of environment */
-	netwave_snapshot( priv, ramBase, iobase);
-	wrqu->data.length = priv->nss.length;
-	memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey));
-
-	priv->lastExec = jiffies;
-
-	/* ReEnable interrupts & restore flags */
-	spin_unlock_irqrestore(&priv->spinlock, flags);
-    
-	return(0);
-}
-
-/*
- * Structures to export the Wireless Handlers
- *     This is the stuff that are treated the wireless extensions (iwconfig)
- */
-
-static const struct iw_priv_args netwave_private_args[] = {
-/*{ cmd,         set_args,                            get_args, name } */
-  { SIOCGIPSNAP, 0, 
-    IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey), 
-    "getsitesurvey" },
-};
-
-static const iw_handler		netwave_handler[] =
-{
-	NULL,				/* SIOCSIWNAME */
-	netwave_get_name,		/* SIOCGIWNAME */
-	netwave_set_nwid,		/* SIOCSIWNWID */
-	netwave_get_nwid,		/* SIOCGIWNWID */
-	NULL,				/* SIOCSIWFREQ */
-	NULL,				/* SIOCGIWFREQ */
-	NULL,				/* SIOCSIWMODE */
-	netwave_get_mode,		/* SIOCGIWMODE */
-	NULL,				/* SIOCSIWSENS */
-	NULL,				/* SIOCGIWSENS */
-	NULL,				/* SIOCSIWRANGE */
-	netwave_get_range,		/* SIOCGIWRANGE */
-	NULL,				/* SIOCSIWPRIV */
-	NULL,				/* SIOCGIWPRIV */
-	NULL,				/* SIOCSIWSTATS */
-	NULL,				/* SIOCGIWSTATS */
-	NULL,				/* SIOCSIWSPY */
-	NULL,				/* SIOCGIWSPY */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWAP */
-	NULL,				/* SIOCGIWAP */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCGIWAPLIST */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWESSID */
-	NULL,				/* SIOCGIWESSID */
-	NULL,				/* SIOCSIWNICKN */
-	NULL,				/* SIOCGIWNICKN */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWRATE */
-	NULL,				/* SIOCGIWRATE */
-	NULL,				/* SIOCSIWRTS */
-	NULL,				/* SIOCGIWRTS */
-	NULL,				/* SIOCSIWFRAG */
-	NULL,				/* SIOCGIWFRAG */
-	NULL,				/* SIOCSIWTXPOW */
-	NULL,				/* SIOCGIWTXPOW */
-	NULL,				/* SIOCSIWRETRY */
-	NULL,				/* SIOCGIWRETRY */
-	netwave_set_scramble,		/* SIOCSIWENCODE */
-	netwave_get_scramble,		/* SIOCGIWENCODE */
-};
-
-static const iw_handler		netwave_private_handler[] =
-{
-	NULL,				/* SIOCIWFIRSTPRIV */
-	netwave_get_snap,		/* SIOCIWFIRSTPRIV + 1 */
-};
-
-static const struct iw_handler_def	netwave_handler_def =
-{
-	.num_standard	= ARRAY_SIZE(netwave_handler),
-	.num_private	= ARRAY_SIZE(netwave_private_handler),
-	.num_private_args = ARRAY_SIZE(netwave_private_args),
-	.standard	= (iw_handler *) netwave_handler,
-	.private	= (iw_handler *) netwave_private_handler,
-	.private_args	= (struct iw_priv_args *) netwave_private_args,
-	.get_wireless_stats = netwave_get_wireless_stats,
-};
-
-/*
- * Function netwave_pcmcia_config (link)
- *
- *     netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION 
- *     event is received, to configure the PCMCIA socket, and to make the
- *     device available to the system. 
- *
- */
-
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-static int netwave_pcmcia_config(struct pcmcia_device *link) {
-    struct net_device *dev = link->priv;
-    netwave_private *priv = netdev_priv(dev);
-    int i, j, last_ret, last_fn;
-    win_req_t req;
-    memreq_t mem;
-    u_char __iomem *ramBase = NULL;
-
-    DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
-
-    /*
-     *  Try allocating IO ports.  This tries a few fixed addresses.
-     *  If you want, you can also read the card's config table to
-     *  pick addresses -- see the serial driver for an example.
-     */
-    for (i = j = 0x0; j < 0x400; j += 0x20) {
-	link->io.BasePort1 = j ^ 0x300;
-	i = pcmcia_request_io(link, &link->io);
-	if (i == 0)
-		break;
-    }
-    if (i != 0) {
-	cs_error(link, RequestIO, i);
-	goto failed;
-    }
-
-    /*
-     *  Now allocate an interrupt line.  Note that this does not
-     *  actually assign a handler to the interrupt.
-     */
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-
-    /*
-     *  This actually configures the PCMCIA socket -- setting up
-     *  the I/O windows and the interrupt mapping.
-     */
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
-
-    /*
-     *  Allocate a 32K memory window.  Note that the struct pcmcia_device
-     *  structure provides space for one window handle -- if your
-     *  device needs several windows, you'll need to keep track of
-     *  the handles in your private data structure, dev->priv.
-     */
-    DEBUG(1, "Setting mem speed of %d\n", mem_speed);
-
-    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
-    req.Base = 0; req.Size = 0x8000;
-    req.AccessSpeed = mem_speed;
-    CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
-    mem.CardOffset = 0x20000; mem.Page = 0; 
-    CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
-
-    /* Store base address of the common window frame */
-    ramBase = ioremap(req.Base, 0x8000);
-    priv->ramBase = ramBase;
-
-    dev->irq = link->irq.AssignedIRQ;
-    dev->base_addr = link->io.BasePort1;
-    SET_NETDEV_DEV(dev, &handle_to_dev(link));
-
-    if (register_netdev(dev) != 0) {
-	printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
-	goto failed;
-    }
-
-    strcpy(priv->node.dev_name, dev->name);
-    link->dev_node = &priv->node;
-
-    /* Reset card before reading physical address */
-    netwave_doreset(dev->base_addr, ramBase);
-
-    /* Read the ethernet address and fill in the Netwave registers. */
-    for (i = 0; i < 6; i++) 
-	dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i);
-
-    printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, "
-	   "id %c%c, hw_addr %pM\n",
-	   dev->name, dev->base_addr, dev->irq,
-	   (u_long) ramBase,
-	   (int) readb(ramBase+NETWAVE_EREG_NI),
-	   (int) readb(ramBase+NETWAVE_EREG_NI+1),
-	   dev->dev_addr);
-
-    /* get revision words */
-    printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n", 
-	   get_uint16(ramBase + NETWAVE_EREG_ARW),
-	   get_uint16(ramBase + NETWAVE_EREG_ARW+2));
-    return 0;
-
-cs_failed:
-    cs_error(link, last_fn, last_ret);
-failed:
-    netwave_release(link);
-    return -ENODEV;
-} /* netwave_pcmcia_config */
-
-/*
- * Function netwave_release (arg)
- *
- *    After a card is removed, netwave_release() will unregister the net
- *    device, and release the PCMCIA configuration.  If the device is
- *    still open, this will be postponed until it is closed.
- */
-static void netwave_release(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-	netwave_private *priv = netdev_priv(dev);
-
-	DEBUG(0, "netwave_release(0x%p)\n", link);
-
-	pcmcia_disable_device(link);
-	if (link->win)
-		iounmap(priv->ramBase);
-}
-
-static int netwave_suspend(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	if (link->open)
-		netif_device_detach(dev);
-
-	return 0;
-}
-
-static int netwave_resume(struct pcmcia_device *link)
-{
-	struct net_device *dev = link->priv;
-
-	if (link->open) {
-		netwave_reset(dev);
-		netif_device_attach(dev);
-	}
-
-	return 0;
-}
-
-
-/*
- * Function netwave_doreset (ioBase, ramBase)
- *
- *    Proper hardware reset of the card.
- */
-static void netwave_doreset(unsigned int ioBase, u_char __iomem *ramBase)
-{
-    /* Reset card */
-    wait_WOC(ioBase);
-    outb(0x80, ioBase + NETWAVE_REG_PMR);
-    writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */
-    outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */
-}
-
-/*
- * Function netwave_reset (dev)
- *
- *    Reset and restore all of the netwave registers 
- */
-static void netwave_reset(struct net_device *dev) {
-    /* u_char state; */
-    netwave_private *priv = netdev_priv(dev);
-    u_char __iomem *ramBase = priv->ramBase;
-    unsigned int iobase = dev->base_addr;
-
-    DEBUG(0, "netwave_reset: Done with hardware reset\n");
-
-    priv->timeoutCounter = 0;
-
-    /* Reset card */
-    netwave_doreset(iobase, ramBase);
-    printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n");
-	
-    /* Write a NOP to check the card */
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
-	
-    /* Set receive conf */
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
-    
-    /* Set transmit conf */
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
-    
-    /* Now set the MU Domain */
-    printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff);
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
-    writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-	
-    /* Set scramble key */
-    printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key);
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
-    writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
-    /* Enable interrupts, bit 4 high to keep unused
-     * source from interrupting us, bit 2 high to 
-     * set interrupt enable, 567 to enable TxDN, 
-     * RxErr and RxRdy
-     */
-    wait_WOC(iobase);
-    outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR);
-
-    /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36
-     * waitWOC
-     * skriv 80 til d000:3688
-     * sjekk om det ble 80
-     */
-    
-    /* Enable Receiver */
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
-	
-    /* Set the IENA bit in COR */
-    wait_WOC(iobase);
-    outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR);
-}
-
-/*
- * Function netwave_hw_xmit (data, len, dev)    
- */
-static int netwave_hw_xmit(unsigned char* data, int len,
-			   struct net_device* dev) {
-    unsigned long flags;
-    unsigned int TxFreeList,
-	         curBuff,
-	         MaxData, 
-                 DataOffset;
-    int tmpcount; 
-	
-    netwave_private *priv = netdev_priv(dev);
-    u_char __iomem * ramBase = priv->ramBase;
-    unsigned int iobase = dev->base_addr;
-
-    /* Disable interrupts & save flags */
-    spin_lock_irqsave(&priv->spinlock, flags);
-
-    /* Check if there are transmit buffers available */
-    wait_WOC(iobase);
-    if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) {
-	/* No buffers available */
-	printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n",
-	       dev->name);
-	spin_unlock_irqrestore(&priv->spinlock, flags);
-	return 1;
-    }
-
-    dev->stats.tx_bytes += len;
-
-    DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
-	  readb(ramBase + NETWAVE_EREG_SPCQ),
-	  readb(ramBase + NETWAVE_EREG_SPU),
-	  readb(ramBase + NETWAVE_EREG_LIF),
-	  readb(ramBase + NETWAVE_EREG_ISPLQ));
-
-    /* Now try to insert it into the adapters free memory */
-    wait_WOC(iobase);
-    TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP);
-    MaxData    = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
-    DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
-	
-    DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
-	  TxFreeList, MaxData, DataOffset);
-
-    /* Copy packet to the adapter fragment buffers */
-    curBuff = TxFreeList; 
-    tmpcount = 0; 
-    while (tmpcount < len) {
-	int tmplen = len - tmpcount; 
-	copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount, 
-		   (tmplen < MaxData) ? tmplen : MaxData);
-	tmpcount += MaxData;
-			
-	/* Advance to next buffer */
-	curBuff = get_uint16(ramBase + curBuff);
-    }
-    
-    /* Now issue transmit list */
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1);
-    writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
-
-    spin_unlock_irqrestore(&priv->spinlock, flags);
-    return 0;
-}
-
-static netdev_tx_t netwave_start_xmit(struct sk_buff *skb,
-					    struct net_device *dev) {
-	/* This flag indicate that the hardware can't perform a transmission.
-	 * Theoritically, NET3 check it before sending a packet to the driver,
-	 * but in fact it never do that and pool continuously.
-	 * As the watchdog will abort too long transmissions, we are quite safe...
-	 */
-
-    netif_stop_queue(dev);
-
-    {
-	short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-	unsigned char* buf = skb->data;
-	
-	if (netwave_hw_xmit( buf, length, dev) == 1) {
-	    /* Some error, let's make them call us another time? */
-	    netif_start_queue(dev);
-	}
-	dev->trans_start = jiffies;
-    }
-    dev_kfree_skb(skb);
-    
-    return NETDEV_TX_OK;
-} /* netwave_start_xmit */
-
-/*
- * Function netwave_interrupt (irq, dev_id)
- *
- *    This function is the interrupt handler for the Netwave card. This
- *    routine will be called whenever: 
- *	  1. A packet is received.
- *	  2. A packet has successfully been transferred and the unit is
- *	     ready to transmit another packet.
- *	  3. A command has completed execution.
- */
-static irqreturn_t netwave_interrupt(int irq, void* dev_id)
-{
-    unsigned int iobase;
-    u_char __iomem *ramBase;
-    struct net_device *dev = (struct net_device *)dev_id;
-    struct netwave_private *priv = netdev_priv(dev);
-    struct pcmcia_device *link = priv->p_dev;
-    int i;
-    
-    if (!netif_device_present(dev))
-	return IRQ_NONE;
-    
-    iobase = dev->base_addr;
-    ramBase = priv->ramBase;
-	
-    /* Now find what caused the interrupt, check while interrupts ready */
-    for (i = 0; i < 10; i++) {
-	u_char status;
-		
-	wait_WOC(iobase);	
-	if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02))
-	    break; /* None of the interrupt sources asserted (normal exit) */
-	
-        status = inb(iobase + NETWAVE_REG_ASR);
-		
-	if (!pcmcia_dev_present(link)) {
-	    DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
-		  "from removed or suspended card!\n", status);
-	    break;
-	}
-		
-	/* RxRdy */
-	if (status & 0x80) {
-	    netwave_rx(dev);
-	    /* wait_WOC(iobase); */
-	    /* RxRdy cannot be reset directly by the host */
-	}
-	/* RxErr */
-	if (status & 0x40) {
-	    u_char rser;
-			
-	    rser = readb(ramBase + NETWAVE_EREG_RSER);			
-	    
-	    if (rser & 0x04) {
-		++dev->stats.rx_dropped;
-		++dev->stats.rx_crc_errors;
-	    }
-	    if (rser & 0x02)
-		++dev->stats.rx_frame_errors;
-			
-	    /* Clear the RxErr bit in RSER. RSER+4 is the
-	     * write part. Also clear the RxCRC (0x04) and 
-	     * RxBig (0x02) bits if present */
-	    wait_WOC(iobase);
-	    writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4);
-
-	    /* Write bit 6 high to ASCC to clear RxErr in ASR,
-	     * WOC must be set first! 
-	     */
-	    wait_WOC(iobase);
-	    writeb(0x40, ramBase + NETWAVE_EREG_ASCC);
-
-	    /* Remember to count up dev->stats on error packets */
-	    ++dev->stats.rx_errors;
-	}
-	/* TxDN */
-	if (status & 0x20) {
-	    int txStatus;
-
-	    txStatus = readb(ramBase + NETWAVE_EREG_TSER);
-	    DEBUG(3, "Transmit done. TSER = %x id %x\n", 
-		  txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
-	    
-	    if (txStatus & 0x20) {
-		/* Transmitting was okay, clear bits */
-		wait_WOC(iobase);
-		writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4);
-		++dev->stats.tx_packets;
-	    }
-			
-	    if (txStatus & 0xd0) {
-		if (txStatus & 0x80) {
-		    ++dev->stats.collisions; /* Because of /proc/net/dev*/
-		    /* ++dev->stats.tx_aborted_errors; */
-		    /* printk("Collision. %ld\n", jiffies - dev->trans_start); */
-		}
-		if (txStatus & 0x40) 
-		    ++dev->stats.tx_carrier_errors;
-		/* 0x80 TxGU Transmit giveup - nine times and no luck
-		 * 0x40 TxNOAP No access point. Discarded packet.
-		 * 0x10 TxErr Transmit error. Always set when 
-		 *      TxGU and TxNOAP is set. (Those are the only ones
-		 *      to set TxErr).
-		 */
-		DEBUG(3, "netwave_interrupt: TxDN with error status %x\n", 
-		      txStatus);
-		
-		/* Clear out TxGU, TxNOAP, TxErr and TxTrys */
-		wait_WOC(iobase);
-		writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
-		++dev->stats.tx_errors;
-	    }
-	    DEBUG(3, "New status is TSER %x ASR %x\n",
-		  readb(ramBase + NETWAVE_EREG_TSER),
-		  inb(iobase + NETWAVE_REG_ASR));
-
-	    netif_wake_queue(dev);
-	}
-	/* TxBA, this would trigger on all error packets received */
-	/* if (status & 0x01) {
-	   DEBUG(4, "Transmit buffers available, %x\n", status);
-	   }
-	   */
-    }
-    /* Handled if we looped at least one time - Jean II */
-    return IRQ_RETVAL(i);
-} /* netwave_interrupt */
-
-/*
- * Function netwave_watchdog (a)
- *
- *    Watchdog : when we start a transmission, we set a timer in the
- *    kernel.  If the transmission complete, this timer is disabled. If
- *    it expire, we reset the card.
- *
- */
-static void netwave_watchdog(struct net_device *dev) {
-
-    DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
-    netwave_reset(dev);
-    dev->trans_start = jiffies;
-    netif_wake_queue(dev);
-} /* netwave_watchdog */
-
-static int netwave_rx(struct net_device *dev)
-{
-    netwave_private *priv = netdev_priv(dev);
-    u_char __iomem *ramBase = priv->ramBase;
-    unsigned int iobase = dev->base_addr;
-    u_char rxStatus;
-    struct sk_buff *skb = NULL;
-    unsigned int curBuffer,
-		rcvList;
-    int rcvLen;
-    int tmpcount = 0;
-    int dataCount, dataOffset;
-    int i;
-    u_char *ptr;
-	
-    DEBUG(3, "xinw_rx: Receiving ... \n");
-
-    /* Receive max 10 packets for now. */
-    for (i = 0; i < 10; i++) {
-	/* Any packets? */
-	wait_WOC(iobase);
-	rxStatus = readb(ramBase + NETWAVE_EREG_RSER);		
-	if ( !( rxStatus & 0x80)) /* No more packets */
-	    break;
-		
-	/* Check if multicast/broadcast or other */
-	/* multicast = (rxStatus & 0x20);  */
-		
-	/* The receive list pointer and length of the packet */
-	wait_WOC(iobase);
-	rcvLen  = get_int16( ramBase + NETWAVE_EREG_RDP);
-	rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2);
-		
-	if (rcvLen < 0) {
-	    printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n", 
-		   rcvLen);
-	    return 0;
-	}
-		
-	skb = dev_alloc_skb(rcvLen+5);
-	if (skb == NULL) {
-	    DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
-		  "length %d\n", rcvLen);
-	    ++dev->stats.rx_dropped;
-	    /* Tell the adapter to skip the packet */
-	    wait_WOC(iobase);
-	    writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
-	    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
-	    return 0;
-	}
-
-	skb_reserve( skb, 2);  /* Align IP on 16 byte */
-	skb_put( skb, rcvLen);
-
-	/* Copy packet fragments to the skb data area */
-	ptr = (u_char*) skb->data;
-	curBuffer = rcvList;
-	tmpcount = 0; 
-	while ( tmpcount < rcvLen) {
-	    /* Get length and offset of current buffer */
-	    dataCount  = get_uint16( ramBase+curBuffer+2);
-	    dataOffset = get_uint16( ramBase+curBuffer+4);
-		
-	    copy_from_pc( ptr + tmpcount,
-			  ramBase+curBuffer+dataOffset, dataCount);
-
-	    tmpcount += dataCount;
-		
-	    /* Point to next buffer */
-	    curBuffer = get_uint16(ramBase + curBuffer);
-	}
-	
-	skb->protocol = eth_type_trans(skb,dev);
-	/* Queue packet for network layer */
-	netif_rx(skb);
-
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += rcvLen;
-
-	/* Got the packet, tell the adapter to skip it */
-	wait_WOC(iobase);
-	writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
-	writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
-	DEBUG(3, "Packet reception ok\n");
-    }
-    return 0;
-}
-
-static int netwave_open(struct net_device *dev) {
-    netwave_private *priv = netdev_priv(dev);
-    struct pcmcia_device *link = priv->p_dev;
-
-    DEBUG(1, "netwave_open: starting.\n");
-    
-    if (!pcmcia_dev_present(link))
-	return -ENODEV;
-
-    link->open++;
-
-    netif_start_queue(dev);
-    netwave_reset(dev);
-	
-    return 0;
-}
-
-static int netwave_close(struct net_device *dev) {
-    netwave_private *priv = netdev_priv(dev);
-    struct pcmcia_device *link = priv->p_dev;
-
-    DEBUG(1, "netwave_close: finishing.\n");
-
-    link->open--;
-    netif_stop_queue(dev);
-
-    return 0;
-}
-
-static struct pcmcia_device_id netwave_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("Xircom", "CreditCard Netwave", 0x2e3ee845, 0x54e28a28),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, netwave_ids);
-
-static struct pcmcia_driver netwave_driver = {
-	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "netwave_cs",
-	},
-	.probe		= netwave_probe,
-	.remove		= netwave_detach,
-	.id_table       = netwave_ids,
-	.suspend	= netwave_suspend,
-	.resume		= netwave_resume,
-};
-
-static int __init init_netwave_cs(void)
-{
-	return pcmcia_register_driver(&netwave_driver);
-}
-
-static void __exit exit_netwave_cs(void)
-{
-	pcmcia_unregister_driver(&netwave_driver);
-}
-
-module_init(init_netwave_cs);
-module_exit(exit_netwave_cs);
-
-/* Set or clear the multicast filter for this adaptor.
-   num_addrs == -1	Promiscuous mode, receive all packets
-   num_addrs == 0	Normal mode, clear multicast list
-   num_addrs > 0	Multicast mode, receive normal and MC packets, and do
-   best-effort filtering.
- */
-static void set_multicast_list(struct net_device *dev)
-{
-    unsigned int iobase = dev->base_addr;
-    netwave_private *priv = netdev_priv(dev);
-    u_char __iomem * ramBase = priv->ramBase;
-    u_char  rcvMode = 0;
-   
-#ifdef PCMCIA_DEBUG
-    if (pc_debug > 2) {
-	static int old;
-	if (old != dev->mc_count) {
-	    old = dev->mc_count;
-	    DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
-		  dev->name, dev->mc_count);
-	}
-    }
-#endif
-	
-    if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
-	/* Multicast Mode */
-	rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
-    } else if (dev->flags & IFF_PROMISC) {
-	/* Promiscous mode */
-	rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
-    } else {
-	/* Normal mode */
-	rcvMode = rxConfRxEna + rxConfBcast;
-    }
-	
-    /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/
-    /* Now set receive mode */
-    wait_WOC(iobase);
-    writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
-    writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1);
-    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
-}
-MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index 83b635f..e2a2c18 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -1,8 +1,10 @@
 config HERMES
 	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
-	depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
-	depends on CFG80211
+	depends on (PPC_PMAC || PCI || PCMCIA)
+	depends on CFG80211 && CFG80211_WEXT
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	select CRYPTO
 	select CRYPTO_MICHAEL_MIC
diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c
index 1257250..cfa7296 100644
--- a/drivers/net/wireless/orinoco/fw.c
+++ b/drivers/net/wireless/orinoco/fw.c
@@ -28,6 +28,12 @@
 	{ NULL, "prism_sta_fw.bin", "prism_ap_fw.bin", 0, 1024 },
 	{ "symbol_sp24t_prim_fw", "symbol_sp24t_sec_fw", NULL, 0x00003100, 512 }
 };
+MODULE_FIRMWARE("agere_sta_fw.bin");
+MODULE_FIRMWARE("agere_ap_fw.bin");
+MODULE_FIRMWARE("prism_sta_fw.bin");
+MODULE_FIRMWARE("prism_ap_fw.bin");
+MODULE_FIRMWARE("symbol_sp24t_prim_fw");
+MODULE_FIRMWARE("symbol_sp24t_sec_fw");
 
 /* Structure used to access fields in FW
  * Make sure LE decoding macros are used
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index 359652d..404830f 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -60,8 +60,15 @@
 /* Set priv->firmware type, determine firmware properties
  * This function can be called before we have registerred with netdev,
  * so all errors go out with dev_* rather than printk
+ *
+ * If non-NULL stores a firmware description in fw_name.
+ * If non-NULL stores a HW version in hw_ver
+ *
+ * These are output via generic cfg80211 ethtool support.
  */
-int determine_fw_capabilities(struct orinoco_private *priv)
+int determine_fw_capabilities(struct orinoco_private *priv,
+			      char *fw_name, size_t fw_name_len,
+			      u32 *hw_ver)
 {
 	struct device *dev = priv->dev;
 	hermes_t *hw = &priv->hw;
@@ -85,6 +92,12 @@
 	dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n",
 		 nic_id.id, nic_id.variant, nic_id.major, nic_id.minor);
 
+	if (hw_ver)
+		*hw_ver = (((nic_id.id & 0xff) << 24) |
+			   ((nic_id.variant & 0xff) << 16) |
+			   ((nic_id.major & 0xff) << 8) |
+			   (nic_id.minor & 0xff));
+
 	priv->firmware_type = determine_firmware_type(&nic_id);
 
 	/* Get the firmware version */
@@ -135,8 +148,9 @@
 	case FIRMWARE_TYPE_AGERE:
 		/* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
 		   ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
-		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
-			 "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+		if (fw_name)
+			snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d",
+				 sta_id.major, sta_id.minor);
 
 		firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
 
@@ -185,8 +199,8 @@
 			tmp[SYMBOL_MAX_VER_LEN] = '\0';
 		}
 
-		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
-			 "Symbol %s", tmp);
+		if (fw_name)
+			snprintf(fw_name, fw_name_len, "Symbol %s", tmp);
 
 		priv->has_ibss = (firmver >= 0x20000);
 		priv->has_wep = (firmver >= 0x15012);
@@ -224,9 +238,9 @@
 		 * different and less well tested */
 		/* D-Link MAC : 00:40:05:* */
 		/* Addtron MAC : 00:90:D1:* */
-		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
-			 "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
-			 sta_id.variant);
+		if (fw_name)
+			snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d",
+				 sta_id.major, sta_id.minor, sta_id.variant);
 
 		firmver = ((unsigned long)sta_id.major << 16) |
 			((unsigned long)sta_id.minor << 8) | sta_id.variant;
@@ -245,7 +259,8 @@
 		}
 		break;
 	}
-	dev_info(dev, "Firmware determined as %s\n", priv->fw_name);
+	if (fw_name)
+		dev_info(dev, "Firmware determined as %s\n", fw_name);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index 8df6e87..e2f7fdc 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -24,7 +24,8 @@
 struct orinoco_private;
 struct dev_addr_list;
 
-int determine_fw_capabilities(struct orinoco_private *priv);
+int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name,
+			      size_t fw_name_len, u32 *hw_ver);
 int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr);
 int orinoco_hw_allocate_fid(struct orinoco_private *priv);
 int orinoco_get_bitratemode(int bitrate, int automatic);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 7a32bcb..753a180 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -83,7 +83,6 @@
 #include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/ethtool.h>
 #include <linux/suspend.h>
 #include <linux/if_arp.h>
 #include <linux/wireless.h>
@@ -162,8 +161,6 @@
 				 | HERMES_EV_WTERR | HERMES_EV_INFO \
 				 | HERMES_EV_INFDROP)
 
-static const struct ethtool_ops orinoco_ethtool_ops;
-
 /********************************************************************/
 /* Data types                                                       */
 /********************************************************************/
@@ -1994,7 +1991,9 @@
 		goto out;
 	}
 
-	err = determine_fw_capabilities(priv);
+	err = determine_fw_capabilities(priv, wiphy->fw_version,
+					sizeof(wiphy->fw_version),
+					&wiphy->hw_version);
 	if (err != 0) {
 		dev_err(dev, "Incompatible firmware, aborting\n");
 		goto out;
@@ -2010,7 +2009,9 @@
 			priv->do_fw_download = 0;
 
 		/* Check firmware version again */
-		err = determine_fw_capabilities(priv);
+		err = determine_fw_capabilities(priv, wiphy->fw_version,
+						sizeof(wiphy->fw_version),
+						&wiphy->hw_version);
 		if (err != 0) {
 			dev_err(dev, "Incompatible firmware, aborting\n");
 			goto out;
@@ -2212,7 +2213,6 @@
 	dev->ieee80211_ptr = wdev;
 	dev->netdev_ops = &orinoco_netdev_ops;
 	dev->watchdog_timeo = HZ; /* 1 second timeout */
-	dev->ethtool_ops = &orinoco_ethtool_ops;
 	dev->wireless_handlers = &orinoco_handler_def;
 #ifdef WIRELESS_SPY
 	dev->wireless_data = &priv->wireless_data;
@@ -2225,6 +2225,7 @@
 	netif_carrier_off(dev);
 
 	memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
+	memcpy(dev->perm_addr, wiphy->perm_addr, ETH_ALEN);
 
 	dev->base_addr = base_addr;
 	dev->irq = irq;
@@ -2348,27 +2349,6 @@
 }
 EXPORT_SYMBOL(orinoco_down);
 
-static void orinoco_get_drvinfo(struct net_device *dev,
-				struct ethtool_drvinfo *info)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
-	strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
-	strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
-	if (dev->dev.parent)
-		strncpy(info->bus_info, dev_name(dev->dev.parent),
-			sizeof(info->bus_info) - 1);
-	else
-		snprintf(info->bus_info, sizeof(info->bus_info) - 1,
-			 "PCMCIA %p", priv->hw.iobase);
-}
-
-static const struct ethtool_ops orinoco_ethtool_ops = {
-	.get_drvinfo = orinoco_get_drvinfo,
-	.get_link = ethtool_op_get_link,
-};
-
 /********************************************************************/
 /* Module initialization                                            */
 /********************************************************************/
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 9ac6f1d..665ef56 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -93,7 +93,6 @@
 
 	/* Capabilities of the hardware/firmware */
 	fwtype_t firmware_type;
-	char fw_name[32];
 	int ibss_port;
 	int nicbuf_size;
 	u16 channel_mask;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 38c1c9d..f27bb83 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -109,7 +109,7 @@
 	struct orinoco_private *priv;
 	struct orinoco_pccard *card;
 
-	priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+	priv = alloc_orinocodev(sizeof(*card), &link->dev,
 				orinoco_cs_hard_reset, NULL);
 	if (!priv)
 		return -ENOMEM;
@@ -120,10 +120,8 @@
 	link->priv = priv;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = orinoco_interrupt;
-	link->irq.Instance = priv;
 
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
@@ -160,12 +158,6 @@
  * device available to the system.
  */
 
-#define CS_CHECK(fn, ret) do { \
-	last_fn = (fn); \
-	if ((last_ret = (ret)) != 0) \
-		goto cs_failed; \
-} while (0)
-
 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
@@ -240,7 +232,7 @@
 	struct orinoco_private *priv = link->priv;
 	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
-	int last_fn, last_ret;
+	int ret;
 	void __iomem *mem;
 
 	/*
@@ -257,13 +249,12 @@
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
-	if (last_ret) {
+	ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+	if (ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
 			       "CIS configuration.  Maybe you need the "
 			       "ignore_cis_vcc=1 parameter.\n");
-		cs_error(link, RequestIO, last_ret);
 		goto failed;
 	}
 
@@ -272,14 +263,16 @@
 	 * a handler to the interrupt, unless the 'Handler' member of
 	 * the irq structure is initialized.
 	 */
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
 
 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
 	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 	if (!mem)
-		goto cs_failed;
+		goto failed;
 
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 
@@ -288,8 +281,9 @@
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	CS_CHECK(RequestConfiguration,
-		 pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/* Ok, we have the configuration, prepare to register the netdev */
 	card->node.major = card->node.minor = 0;
@@ -315,9 +309,6 @@
 				       * net_device has been registered */
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
-
  failed:
 	orinoco_cs_release(link);
 	return -ENODEV;
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index c361310..59bda24 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -73,9 +73,6 @@
 #define HCR_MEM16	0x10	/* memory width bit, should be preserved */
 
 
-#define CS_CHECK(fn, ret) \
-  do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 /*
  * Reset the card using configuration registers COR and CCSR.
  * If IDLE is 1, stop the firmware, so that it can be safely rewritten.
@@ -83,7 +80,7 @@
 static int
 spectrum_reset(struct pcmcia_device *link, int idle)
 {
-	int last_ret, last_fn;
+	int ret;
 	conf_reg_t reg;
 	u_int save_cor;
 
@@ -95,23 +92,26 @@
 	reg.Function = 0;
 	reg.Action = CS_READ;
 	reg.Offset = CISREG_COR;
-	CS_CHECK(AccessConfigurationRegister,
-		 pcmcia_access_configuration_register(link, &reg));
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	save_cor = reg.Value;
 
 	/* Soft-Reset card */
 	reg.Action = CS_WRITE;
 	reg.Offset = CISREG_COR;
 	reg.Value = (save_cor | COR_SOFT_RESET);
-	CS_CHECK(AccessConfigurationRegister,
-		 pcmcia_access_configuration_register(link, &reg));
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	udelay(1000);
 
 	/* Read CCSR */
 	reg.Action = CS_READ;
 	reg.Offset = CISREG_CCSR;
-	CS_CHECK(AccessConfigurationRegister,
-		 pcmcia_access_configuration_register(link, &reg));
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 
 	/*
 	 * Start or stop the firmware.  Memory width bit should be
@@ -120,21 +120,22 @@
 	reg.Action = CS_WRITE;
 	reg.Offset = CISREG_CCSR;
 	reg.Value = (idle ? HCR_IDLE : HCR_RUN) | (reg.Value & HCR_MEM16);
-	CS_CHECK(AccessConfigurationRegister,
-		 pcmcia_access_configuration_register(link, &reg));
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	udelay(1000);
 
 	/* Restore original COR configuration index */
 	reg.Action = CS_WRITE;
 	reg.Offset = CISREG_COR;
 	reg.Value = (save_cor & ~COR_SOFT_RESET);
-	CS_CHECK(AccessConfigurationRegister,
-		 pcmcia_access_configuration_register(link, &reg));
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	udelay(1000);
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
+failed:
 	return -ENODEV;
 }
 
@@ -181,7 +182,7 @@
 	struct orinoco_private *priv;
 	struct orinoco_pccard *card;
 
-	priv = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+	priv = alloc_orinocodev(sizeof(*card), &link->dev,
 				spectrum_cs_hard_reset,
 				spectrum_cs_stop_firmware);
 	if (!priv)
@@ -193,10 +194,8 @@
 	link->priv = priv;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = orinoco_interrupt;
-	link->irq.Instance = priv;
 
 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
@@ -307,7 +306,7 @@
 	struct orinoco_private *priv = link->priv;
 	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
-	int last_fn, last_ret;
+	int ret;
 	void __iomem *mem;
 
 	/*
@@ -324,13 +323,12 @@
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
-	if (last_ret) {
+	ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+	if (ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
 			       "CIS configuration.  Maybe you need the "
 			       "ignore_cis_vcc=1 parameter.\n");
-		cs_error(link, RequestIO, last_ret);
 		goto failed;
 	}
 
@@ -339,14 +337,16 @@
 	 * a handler to the interrupt, unless the 'Handler' member of
 	 * the irq structure is initialized.
 	 */
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
 
 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
 	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 	if (!mem)
-		goto cs_failed;
+		goto failed;
 
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 
@@ -355,8 +355,9 @@
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	CS_CHECK(RequestConfiguration,
-		 pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/* Ok, we have the configuration, prepare to register the netdev */
 	card->node.major = card->node.minor = 0;
@@ -386,9 +387,6 @@
 				       * net_device has been registered */
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
-
  failed:
 	spectrum_cs_release(link);
 	return -ENODEV;
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index b45d6a4..b0342a5 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,6 +1,6 @@
 config P54_COMMON
 	tristate "Softmac Prism54 support"
-	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && EXPERIMENTAL
 	select FW_LOADER
 	---help---
 	  This is common code for isl38xx/stlc45xx based modules.
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 0efe67d..8e3818f 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -126,7 +126,7 @@
 	int ret = -ENOMEM;
 
 	if ((!list->entries) || (!list->band_channel_num[band]))
-		return 0;
+		return -EINVAL;
 
 	tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
 	if (!tmp)
@@ -158,6 +158,7 @@
 			       (list->channels[i].data & CHAN_HAS_CURVE ? "" :
 				" [curve data]"),
 			       list->channels[i].index, list->channels[i].freq);
+			continue;
 		}
 
 		tmp->channels[j].band = list->channels[i].band;
@@ -165,7 +166,16 @@
 		j++;
 	}
 
-	tmp->n_channels = list->band_channel_num[band];
+	if (j == 0) {
+		printk(KERN_ERR "%s: Disabling totally damaged %s band.\n",
+		       wiphy_name(dev->wiphy), (band == IEEE80211_BAND_2GHZ) ?
+		       "2 GHz" : "5 GHz");
+
+		ret = -ENODATA;
+		goto err_out;
+	}
+
+	tmp->n_channels = j;
 	old = priv->band_table[band];
 	priv->band_table[band] = tmp;
 	if (old) {
@@ -228,13 +238,13 @@
 	struct p54_common *priv = dev->priv;
 	struct p54_channel_list *list;
 	unsigned int i, j, max_channel_num;
-	int ret = -ENOMEM;
+	int ret = 0;
 	u16 freq;
 
 	if ((priv->iq_autocal_len != priv->curve_data->entries) ||
 	    (priv->iq_autocal_len != priv->output_limit->entries))
-		printk(KERN_ERR "%s: EEPROM is damaged... you may not be able"
-				"to use all channels with this device.\n",
+		printk(KERN_ERR "%s: Unsupported or damaged EEPROM detected. "
+				"You may not be able to use all channels.\n",
 				wiphy_name(dev->wiphy));
 
 	max_channel_num = max_t(unsigned int, priv->output_limit->entries,
@@ -243,8 +253,10 @@
 				priv->curve_data->entries);
 
 	list = kzalloc(sizeof(*list), GFP_KERNEL);
-	if (!list)
+	if (!list) {
+		ret = -ENOMEM;
 		goto free;
+	}
 
 	list->max_entries = max_channel_num;
 	list->channels = kzalloc(sizeof(struct p54_channel_entry) *
@@ -282,13 +294,8 @@
 	     p54_compare_channels, NULL);
 
 	for (i = 0, j = 0; i < IEEE80211_NUM_BANDS; i++) {
-		if (list->band_channel_num[i]) {
-			ret = p54_generate_band(dev, list, i);
-			if (ret)
-				goto free;
-
+		if (p54_generate_band(dev, list, i) == 0)
 			j++;
-		}
 	}
 	if (j == 0) {
 		/* no useable band available. */
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 4d486bf..18012db 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -579,7 +579,7 @@
 	 * For now, disable PS by default because it affects
 	 * link stability significantly.
 	 */
-	dev->wiphy->ps_default = false;
+	dev->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
 
 	mutex_init(&priv->conf_mutex);
 	mutex_init(&priv->eeprom_mutex);
diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c
index d348c26..a15962a 100644
--- a/drivers/net/wireless/p54/p54pci.c
+++ b/drivers/net/wireless/p54/p54pci.c
@@ -411,7 +411,7 @@
 	int err;
 
 	init_completion(&priv->boot_comp);
-	err = request_irq(priv->pdev->irq, &p54p_interrupt,
+	err = request_irq(priv->pdev->irq, p54p_interrupt,
 			  IRQF_SHARED, "p54pci", dev);
 	if (err) {
 		dev_err(&priv->pdev->dev, "failed to register IRQ handler\n");
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 2505be5..a3ba353 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -41,6 +41,9 @@
 #define ISL3877_IMAGE_FILE	"isl3877"
 #define ISL3886_IMAGE_FILE	"isl3886"
 #define ISL3890_IMAGE_FILE	"isl3890"
+MODULE_FIRMWARE(ISL3877_IMAGE_FILE);
+MODULE_FIRMWARE(ISL3886_IMAGE_FILE);
+MODULE_FIRMWARE(ISL3890_IMAGE_FILE);
 
 static int prism54_bring_down(islpci_private *);
 static int islpci_alloc_memory(islpci_private *);
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
index 83d3662..e4f2bb7 100644
--- a/drivers/net/wireless/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -181,7 +181,7 @@
 	isl38xx_disable_interrupts(priv->device_base);
 
 	/* request for the interrupt before uploading the firmware */
-	rvalue = request_irq(pdev->irq, &islpci_interrupt,
+	rvalue = request_irq(pdev->irq, islpci_interrupt,
 			     IRQF_SHARED, ndev->name, priv);
 
 	if (rvalue) {
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 1c88c2e..88e1e4e 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -71,25 +71,7 @@
 #include "rayctl.h"
 #include "ray_cs.h"
 
-/* All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
 
-#ifdef RAYLINK_DEBUG
-#define PCMCIA_DEBUG RAYLINK_DEBUG
-#endif
-#ifdef PCMCIA_DEBUG
-static int ray_debug;
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-/* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */
-#define DEBUG(n, args...) if (pc_debug > (n)) printk(args);
-#else
-#define DEBUG(n, args...)
-#endif
 /** Prototypes based on PCMCIA skeleton driver *******************************/
 static int ray_config(struct pcmcia_device *link);
 static void ray_release(struct pcmcia_device *link);
@@ -325,7 +307,7 @@
 	ray_dev_t *local;
 	struct net_device *dev;
 
-	DEBUG(1, "ray_attach()\n");
+	dev_dbg(&p_dev->dev, "ray_attach()\n");
 
 	/* Allocate space for private device-specific data */
 	dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -341,8 +323,7 @@
 	p_dev->io.IOAddrLines = 5;
 
 	/* Interrupt setup. For PCMCIA, driver takes what's given */
-	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	p_dev->irq.Handler = &ray_interrupt;
 
 	/* General socket configuration */
@@ -351,13 +332,12 @@
 	p_dev->conf.ConfigIndex = 1;
 
 	p_dev->priv = dev;
-	p_dev->irq.Instance = dev;
 
 	local->finder = p_dev;
 	local->card_status = CARD_INSERTED;
 	local->authentication_state = UNAUTHENTICATED;
 	local->num_multi = 0;
-	DEBUG(2, "ray_attach p_dev = %p,  dev = %p,  local = %p, intr = %p\n",
+	dev_dbg(&p_dev->dev, "ray_attach p_dev = %p,  dev = %p,  local = %p, intr = %p\n",
 	      p_dev, dev, local, &ray_interrupt);
 
 	/* Raylink entries in the device structure */
@@ -370,7 +350,7 @@
 #endif /* WIRELESS_SPY */
 
 
-	DEBUG(2, "ray_cs ray_attach calling ether_setup.)\n");
+	dev_dbg(&p_dev->dev, "ray_cs ray_attach calling ether_setup.)\n");
 	netif_stop_queue(dev);
 
 	init_timer(&local->timer);
@@ -393,7 +373,7 @@
 	struct net_device *dev;
 	ray_dev_t *local;
 
-	DEBUG(1, "ray_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "ray_detach\n");
 
 	this_device = NULL;
 	dev = link->priv;
@@ -408,7 +388,7 @@
 			unregister_netdev(dev);
 		free_netdev(dev);
 	}
-	DEBUG(2, "ray_cs ray_detach ending\n");
+	dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
 } /* ray_detach */
 
 /*=============================================================================
@@ -416,19 +396,17 @@
     is received, to configure the PCMCIA socket, and to make the
     ethernet device available to the system.
 =============================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 #define MAX_TUPLE_SIZE 128
 static int ray_config(struct pcmcia_device *link)
 {
-	int last_fn = 0, last_ret = 0;
+	int ret = 0;
 	int i;
 	win_req_t req;
 	memreq_t mem;
 	struct net_device *dev = (struct net_device *)link->priv;
 	ray_dev_t *local = netdev_priv(dev);
 
-	DEBUG(1, "ray_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "ray_config\n");
 
 	/* Determine card type and firmware version */
 	printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n",
@@ -440,14 +418,17 @@
 	/* Now allocate an interrupt line.  Note that this does not
 	   actually assign a handler to the interrupt.
 	 */
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
 	dev->irq = link->irq.AssignedIRQ;
 
 	/* This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping.
 	 */
-	CS_CHECK(RequestConfiguration,
-		 pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 /*** Set up 32k window for shared memory (transmit and control) ************/
 	req.Attributes =
@@ -455,10 +436,14 @@
 	req.Base = 0;
 	req.Size = 0x8000;
 	req.AccessSpeed = ray_mem_speed;
-	CS_CHECK(RequestWindow, pcmcia_request_window(&link, &req, &link->win));
+	ret = pcmcia_request_window(link, &req, &link->win);
+	if (ret)
+		goto failed;
 	mem.CardOffset = 0x0000;
 	mem.Page = 0;
-	CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+	ret = pcmcia_map_mem_page(link, link->win, &mem);
+	if (ret)
+		goto failed;
 	local->sram = ioremap(req.Base, req.Size);
 
 /*** Set up 16k window for shared memory (receive buffer) ***************/
@@ -467,11 +452,14 @@
 	req.Base = 0;
 	req.Size = 0x4000;
 	req.AccessSpeed = ray_mem_speed;
-	CS_CHECK(RequestWindow,
-		 pcmcia_request_window(&link, &req, &local->rmem_handle));
+	ret = pcmcia_request_window(link, &req, &local->rmem_handle);
+	if (ret)
+		goto failed;
 	mem.CardOffset = 0x8000;
 	mem.Page = 0;
-	CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem));
+	ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+	if (ret)
+		goto failed;
 	local->rmem = ioremap(req.Base, req.Size);
 
 /*** Set up window for attribute memory ***********************************/
@@ -480,22 +468,25 @@
 	req.Base = 0;
 	req.Size = 0x1000;
 	req.AccessSpeed = ray_mem_speed;
-	CS_CHECK(RequestWindow,
-		 pcmcia_request_window(&link, &req, &local->amem_handle));
+	ret = pcmcia_request_window(link, &req, &local->amem_handle);
+	if (ret)
+		goto failed;
 	mem.CardOffset = 0x0000;
 	mem.Page = 0;
-	CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem));
+	ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+	if (ret)
+		goto failed;
 	local->amem = ioremap(req.Base, req.Size);
 
-	DEBUG(3, "ray_config sram=%p\n", local->sram);
-	DEBUG(3, "ray_config rmem=%p\n", local->rmem);
-	DEBUG(3, "ray_config amem=%p\n", local->amem);
+	dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
+	dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
+	dev_dbg(&link->dev, "ray_config amem=%p\n", local->amem);
 	if (ray_init(dev) < 0) {
 		ray_release(link);
 		return -ENODEV;
 	}
 
-	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	SET_NETDEV_DEV(dev, &link->dev);
 	i = register_netdev(dev);
 	if (i != 0) {
 		printk("ray_config register_netdev() failed\n");
@@ -511,9 +502,7 @@
 
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
-
+failed:
 	ray_release(link);
 	return -ENODEV;
 } /* ray_config */
@@ -543,9 +532,9 @@
 	struct ccs __iomem *pccs;
 	ray_dev_t *local = netdev_priv(dev);
 	struct pcmcia_device *link = local->finder;
-	DEBUG(1, "ray_init(0x%p)\n", dev);
+	dev_dbg(&link->dev, "ray_init(0x%p)\n", dev);
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(0, "ray_init - device not present\n");
+		dev_dbg(&link->dev, "ray_init - device not present\n");
 		return -1;
 	}
 
@@ -567,13 +556,13 @@
 	local->fw_ver = local->startup_res.firmware_version[0];
 	local->fw_bld = local->startup_res.firmware_version[1];
 	local->fw_var = local->startup_res.firmware_version[2];
-	DEBUG(1, "ray_init firmware version %d.%d \n", local->fw_ver,
+	dev_dbg(&link->dev, "ray_init firmware version %d.%d \n", local->fw_ver,
 	      local->fw_bld);
 
 	local->tib_length = 0x20;
 	if ((local->fw_ver == 5) && (local->fw_bld >= 30))
 		local->tib_length = local->startup_res.tib_length;
-	DEBUG(2, "ray_init tib_length = 0x%02x\n", local->tib_length);
+	dev_dbg(&link->dev, "ray_init tib_length = 0x%02x\n", local->tib_length);
 	/* Initialize CCS's to buffer free state */
 	pccs = ccs_base(local);
 	for (i = 0; i < NUMBER_OF_CCS; i++) {
@@ -592,7 +581,7 @@
 
 	clear_interrupt(local);	/* Clear any interrupt from the card */
 	local->card_status = CARD_AWAITING_PARAM;
-	DEBUG(2, "ray_init ending\n");
+	dev_dbg(&link->dev, "ray_init ending\n");
 	return 0;
 } /* ray_init */
 
@@ -605,9 +594,9 @@
 	struct ccs __iomem *pccs;
 	struct pcmcia_device *link = local->finder;
 
-	DEBUG(1, "dl_startup_params entered\n");
+	dev_dbg(&link->dev, "dl_startup_params entered\n");
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs dl_startup_params - device not present\n");
+		dev_dbg(&link->dev, "ray_cs dl_startup_params - device not present\n");
 		return -1;
 	}
 
@@ -625,7 +614,7 @@
 	local->dl_param_ccs = ccsindex;
 	pccs = ccs_base(local) + ccsindex;
 	writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
-	DEBUG(2, "dl_startup_params start ccsindex = %d\n",
+	dev_dbg(&link->dev, "dl_startup_params start ccsindex = %d\n",
 	      local->dl_param_ccs);
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
@@ -641,7 +630,7 @@
 	local->timer.data = (long)local;
 	local->timer.function = &verify_dl_startup;
 	add_timer(&local->timer);
-	DEBUG(2,
+	dev_dbg(&link->dev,
 	      "ray_cs dl_startup_params started timer for verify_dl_startup\n");
 	return 0;
 } /* dl_startup_params */
@@ -717,11 +706,11 @@
 	struct pcmcia_device *link = local->finder;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs verify_dl_startup - device not present\n");
+		dev_dbg(&link->dev, "ray_cs verify_dl_startup - device not present\n");
 		return;
 	}
-#ifdef PCMCIA_DEBUG
-	if (pc_debug > 2) {
+#if 0
+	{
 		int i;
 		printk(KERN_DEBUG
 		       "verify_dl_startup parameters sent via ccs %d:\n",
@@ -760,7 +749,7 @@
 	int ccsindex;
 	struct pcmcia_device *link = local->finder;
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs start_net - device not present\n");
+		dev_dbg(&link->dev, "ray_cs start_net - device not present\n");
 		return;
 	}
 	/* Fill in the CCS fields for the ECF */
@@ -771,7 +760,7 @@
 	writeb(0, &pccs->var.start_network.update_param);
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(1, "ray start net failed - card not ready for intr\n");
+		dev_dbg(&link->dev, "ray start net failed - card not ready for intr\n");
 		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
 		return;
 	}
@@ -790,7 +779,7 @@
 	struct pcmcia_device *link = local->finder;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs join_net - device not present\n");
+		dev_dbg(&link->dev, "ray_cs join_net - device not present\n");
 		return;
 	}
 	/* Fill in the CCS fields for the ECF */
@@ -802,7 +791,7 @@
 	writeb(0, &pccs->var.join_network.net_initiated);
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(1, "ray join net failed - card not ready for intr\n");
+		dev_dbg(&link->dev, "ray join net failed - card not ready for intr\n");
 		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
 		return;
 	}
@@ -821,7 +810,7 @@
 	ray_dev_t *local = netdev_priv(dev);
 	int i;
 
-	DEBUG(1, "ray_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "ray_release\n");
 
 	del_timer(&local->timer);
 
@@ -829,15 +818,15 @@
 	iounmap(local->rmem);
 	iounmap(local->amem);
 	/* Do bother checking to see if these succeed or not */
-	i = pcmcia_release_window(local->amem_handle);
+	i = pcmcia_release_window(link, local->amem_handle);
 	if (i != 0)
-		DEBUG(0, "ReleaseWindow(local->amem) ret = %x\n", i);
-	i = pcmcia_release_window(local->rmem_handle);
+		dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
+	i = pcmcia_release_window(link, local->rmem_handle);
 	if (i != 0)
-		DEBUG(0, "ReleaseWindow(local->rmem) ret = %x\n", i);
+		dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
 	pcmcia_disable_device(link);
 
-	DEBUG(2, "ray_release ending\n");
+	dev_dbg(&link->dev, "ray_release ending\n");
 }
 
 static int ray_suspend(struct pcmcia_device *link)
@@ -871,9 +860,9 @@
 	ray_dev_t *local = netdev_priv(dev);
 	struct pcmcia_device *link = local->finder;
 
-	DEBUG(1, "ray_dev_init(dev=%p)\n", dev);
+	dev_dbg(&link->dev, "ray_dev_init(dev=%p)\n", dev);
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_dev_init - device not present\n");
+		dev_dbg(&link->dev, "ray_dev_init - device not present\n");
 		return -1;
 	}
 #ifdef RAY_IMMEDIATE_INIT
@@ -887,7 +876,7 @@
 	/* Postpone the card init so that we can still configure the card,
 	 * for example using the Wireless Extensions. The init will happen
 	 * in ray_open() - Jean II */
-	DEBUG(1,
+	dev_dbg(&link->dev,
 	      "ray_dev_init: postponing card init to ray_open() ; Status = %d\n",
 	      local->card_status);
 #endif /* RAY_IMMEDIATE_INIT */
@@ -896,7 +885,7 @@
 	memcpy(dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
 	memset(dev->broadcast, 0xff, ETH_ALEN);
 
-	DEBUG(2, "ray_dev_init ending\n");
+	dev_dbg(&link->dev, "ray_dev_init ending\n");
 	return 0;
 }
 
@@ -906,9 +895,9 @@
 	ray_dev_t *local = netdev_priv(dev);
 	struct pcmcia_device *link = local->finder;
 	/* Dummy routine to satisfy device structure */
-	DEBUG(1, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
+	dev_dbg(&link->dev, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_dev_config - device not present\n");
+		dev_dbg(&link->dev, "ray_dev_config - device not present\n");
 		return -1;
 	}
 
@@ -924,14 +913,14 @@
 	short length = skb->len;
 
 	if (!pcmcia_dev_present(link)) {
-		DEBUG(2, "ray_dev_start_xmit - device not present\n");
+		dev_dbg(&link->dev, "ray_dev_start_xmit - device not present\n");
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
-	DEBUG(3, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
+	dev_dbg(&link->dev, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
 	if (local->authentication_state == NEED_TO_AUTH) {
-		DEBUG(0, "ray_cs Sending authentication request.\n");
+		dev_dbg(&link->dev, "ray_cs Sending authentication request.\n");
 		if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
 			local->authentication_state = AUTHENTICATED;
 			netif_stop_queue(dev);
@@ -971,7 +960,7 @@
 	struct tx_msg __iomem *ptx;	/* Address of xmit buffer in PC space */
 	short int addr;		/* Address of xmit buffer in card space */
 
-	DEBUG(3, "ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
+	pr_debug("ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
 	if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
 		printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",
 		       len);
@@ -979,9 +968,9 @@
 	}
 	switch (ccsindex = get_free_tx_ccs(local)) {
 	case ECCSBUSY:
-		DEBUG(2, "ray_hw_xmit tx_ccs table busy\n");
+		pr_debug("ray_hw_xmit tx_ccs table busy\n");
 	case ECCSFULL:
-		DEBUG(2, "ray_hw_xmit No free tx ccs\n");
+		pr_debug("ray_hw_xmit No free tx ccs\n");
 	case ECARDGONE:
 		netif_stop_queue(dev);
 		return XMIT_NO_CCS;
@@ -1018,12 +1007,12 @@
 	writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode);
 	writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate);
 	writeb(0, &pccs->var.tx_request.antenna);
-	DEBUG(3, "ray_hw_xmit default_tx_rate = 0x%x\n",
+	pr_debug("ray_hw_xmit default_tx_rate = 0x%x\n",
 	      local->net_default_tx_rate);
 
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(2, "ray_hw_xmit failed - ECF not ready for intr\n");
+		pr_debug("ray_hw_xmit failed - ECF not ready for intr\n");
 /* TBD very inefficient to copy packet to buffer, and then not
    send it, but the alternative is to queue the messages and that
    won't be done for a while.  Maybe set tbusy until a CCS is free?
@@ -1040,7 +1029,7 @@
 {
 	__be16 proto = ((struct ethhdr *)data)->h_proto;
 	if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */
-		DEBUG(3, "ray_cs translate_frame DIX II\n");
+		pr_debug("ray_cs translate_frame DIX II\n");
 		/* Copy LLC header to card buffer */
 		memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
 		memcpy_toio(((void __iomem *)&ptx->var) + sizeof(eth2_llc),
@@ -1056,9 +1045,9 @@
 			    len - ETH_HLEN);
 		return (int)sizeof(struct snaphdr_t) - ETH_HLEN;
 	} else { /* already  802 type, and proto is length */
-		DEBUG(3, "ray_cs translate_frame 802\n");
+		pr_debug("ray_cs translate_frame 802\n");
 		if (proto == htons(0xffff)) { /* evil netware IPX 802.3 without LLC */
-			DEBUG(3, "ray_cs translate_frame evil IPX\n");
+			pr_debug("ray_cs translate_frame evil IPX\n");
 			memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
 			return 0 - ETH_HLEN;
 		}
@@ -1603,7 +1592,7 @@
 	struct pcmcia_device *link;
 	link = local->finder;
 
-	DEBUG(1, "ray_open('%s')\n", dev->name);
+	dev_dbg(&link->dev, "ray_open('%s')\n", dev->name);
 
 	if (link->open == 0)
 		local->num_multi = 0;
@@ -1613,7 +1602,7 @@
 	if (local->card_status == CARD_AWAITING_PARAM) {
 		int i;
 
-		DEBUG(1, "ray_open: doing init now !\n");
+		dev_dbg(&link->dev, "ray_open: doing init now !\n");
 
 		/* Download startup parameters */
 		if ((i = dl_startup_params(dev)) < 0) {
@@ -1629,7 +1618,7 @@
 	else
 		netif_start_queue(dev);
 
-	DEBUG(2, "ray_open ending\n");
+	dev_dbg(&link->dev, "ray_open ending\n");
 	return 0;
 } /* end ray_open */
 
@@ -1640,7 +1629,7 @@
 	struct pcmcia_device *link;
 	link = local->finder;
 
-	DEBUG(1, "ray_dev_close('%s')\n", dev->name);
+	dev_dbg(&link->dev, "ray_dev_close('%s')\n", dev->name);
 
 	link->open--;
 	netif_stop_queue(dev);
@@ -1656,7 +1645,7 @@
 /*===========================================================================*/
 static void ray_reset(struct net_device *dev)
 {
-	DEBUG(1, "ray_reset entered\n");
+	pr_debug("ray_reset entered\n");
 	return;
 }
 
@@ -1669,17 +1658,17 @@
 	struct pcmcia_device *link = local->finder;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs interrupt_ecf - device not present\n");
+		dev_dbg(&link->dev, "ray_cs interrupt_ecf - device not present\n");
 		return -1;
 	}
-	DEBUG(2, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
+	dev_dbg(&link->dev, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
 
 	while (i &&
 	       (readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) &
 		ECF_INTR_SET))
 		i--;
 	if (i == 0) {
-		DEBUG(2, "ray_cs interrupt_ecf card not ready for interrupt\n");
+		dev_dbg(&link->dev, "ray_cs interrupt_ecf card not ready for interrupt\n");
 		return -1;
 	}
 	/* Fill the mailbox, then kick the card */
@@ -1698,12 +1687,12 @@
 	struct pcmcia_device *link = local->finder;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs get_free_tx_ccs - device not present\n");
+		dev_dbg(&link->dev, "ray_cs get_free_tx_ccs - device not present\n");
 		return ECARDGONE;
 	}
 
 	if (test_and_set_bit(0, &local->tx_ccs_lock)) {
-		DEBUG(1, "ray_cs tx_ccs_lock busy\n");
+		dev_dbg(&link->dev, "ray_cs tx_ccs_lock busy\n");
 		return ECCSBUSY;
 	}
 
@@ -1716,7 +1705,7 @@
 		}
 	}
 	local->tx_ccs_lock = 0;
-	DEBUG(2, "ray_cs ERROR no free tx CCS for raylink card\n");
+	dev_dbg(&link->dev, "ray_cs ERROR no free tx CCS for raylink card\n");
 	return ECCSFULL;
 } /* get_free_tx_ccs */
 
@@ -1730,11 +1719,11 @@
 	struct pcmcia_device *link = local->finder;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs get_free_ccs - device not present\n");
+		dev_dbg(&link->dev, "ray_cs get_free_ccs - device not present\n");
 		return ECARDGONE;
 	}
 	if (test_and_set_bit(0, &local->ccs_lock)) {
-		DEBUG(1, "ray_cs ccs_lock busy\n");
+		dev_dbg(&link->dev, "ray_cs ccs_lock busy\n");
 		return ECCSBUSY;
 	}
 
@@ -1747,7 +1736,7 @@
 		}
 	}
 	local->ccs_lock = 0;
-	DEBUG(1, "ray_cs ERROR no free CCS for raylink card\n");
+	dev_dbg(&link->dev, "ray_cs ERROR no free CCS for raylink card\n");
 	return ECCSFULL;
 } /* get_free_ccs */
 
@@ -1823,7 +1812,7 @@
 	struct pcmcia_device *link = local->finder;
 	struct status __iomem *p = local->sram + STATUS_BASE;
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs net_device_stats - device not present\n");
+		dev_dbg(&link->dev, "ray_cs net_device_stats - device not present\n");
 		return &local->stats;
 	}
 	if (readb(&p->mrx_overflow_for_host)) {
@@ -1856,12 +1845,12 @@
 	struct ccs __iomem *pccs;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_update_parm - device not present\n");
+		dev_dbg(&link->dev, "ray_update_parm - device not present\n");
 		return;
 	}
 
 	if ((ccsindex = get_free_ccs(local)) < 0) {
-		DEBUG(0, "ray_update_parm - No free ccs\n");
+		dev_dbg(&link->dev, "ray_update_parm - No free ccs\n");
 		return;
 	}
 	pccs = ccs_base(local) + ccsindex;
@@ -1874,7 +1863,7 @@
 	}
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(0, "ray_cs associate failed - ECF not ready for intr\n");
+		dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
 		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
 	}
 }
@@ -1891,12 +1880,12 @@
 	void __iomem *p = local->sram + HOST_TO_ECF_BASE;
 
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_update_multi_list - device not present\n");
+		dev_dbg(&link->dev, "ray_update_multi_list - device not present\n");
 		return;
 	} else
-		DEBUG(2, "ray_update_multi_list(%p)\n", dev);
+		dev_dbg(&link->dev, "ray_update_multi_list(%p)\n", dev);
 	if ((ccsindex = get_free_ccs(local)) < 0) {
-		DEBUG(1, "ray_update_multi - No free ccs\n");
+		dev_dbg(&link->dev, "ray_update_multi - No free ccs\n");
 		return;
 	}
 	pccs = ccs_base(local) + ccsindex;
@@ -1910,7 +1899,7 @@
 		for (dmip = &dev->mc_list; (dmi = *dmip) != NULL;
 		     dmip = &dmi->next) {
 			memcpy_toio(p, dmi->dmi_addr, ETH_ALEN);
-			DEBUG(1,
+			dev_dbg(&link->dev,
 			      "ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",
 			      dmi->dmi_addr[0], dmi->dmi_addr[1],
 			      dmi->dmi_addr[2], dmi->dmi_addr[3],
@@ -1921,12 +1910,12 @@
 		if (i > 256 / ADDRLEN)
 			i = 256 / ADDRLEN;
 		writeb((UCHAR) i, &pccs->var);
-		DEBUG(1, "ray_cs update_multi %d addresses in list\n", i);
+		dev_dbg(&link->dev, "ray_cs update_multi %d addresses in list\n", i);
 		/* Interrupt the firmware to process the command */
 		local->num_multi = i;
 	}
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(1,
+		dev_dbg(&link->dev,
 		      "ray_cs update_multi failed - ECF not ready for intr\n");
 		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
 	}
@@ -1938,11 +1927,11 @@
 	ray_dev_t *local = netdev_priv(dev);
 	UCHAR promisc;
 
-	DEBUG(2, "ray_cs set_multicast_list(%p)\n", dev);
+	pr_debug("ray_cs set_multicast_list(%p)\n", dev);
 
 	if (dev->flags & IFF_PROMISC) {
 		if (local->sparm.b5.a_promiscuous_mode == 0) {
-			DEBUG(1, "ray_cs set_multicast_list promisc on\n");
+			pr_debug("ray_cs set_multicast_list promisc on\n");
 			local->sparm.b5.a_promiscuous_mode = 1;
 			promisc = 1;
 			ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1950,7 +1939,7 @@
 		}
 	} else {
 		if (local->sparm.b5.a_promiscuous_mode == 1) {
-			DEBUG(1, "ray_cs set_multicast_list promisc off\n");
+			pr_debug("ray_cs set_multicast_list promisc off\n");
 			local->sparm.b5.a_promiscuous_mode = 0;
 			promisc = 0;
 			ray_update_parm(dev, OBJID_promiscuous_mode,
@@ -1984,19 +1973,19 @@
 	if (dev == NULL)	/* Note that we want interrupts with dev->start == 0 */
 		return IRQ_NONE;
 
-	DEBUG(4, "ray_cs: interrupt for *dev=%p\n", dev);
+	pr_debug("ray_cs: interrupt for *dev=%p\n", dev);
 
 	local = netdev_priv(dev);
 	link = (struct pcmcia_device *)local->finder;
 	if (!pcmcia_dev_present(link)) {
-		DEBUG(2,
-		      "ray_cs interrupt from device not present or suspended.\n");
+		pr_debug(
+			"ray_cs interrupt from device not present or suspended.\n");
 		return IRQ_NONE;
 	}
 	rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index);
 
 	if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
-		DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
+		dev_dbg(&link->dev, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
 		clear_interrupt(local);
 		return IRQ_HANDLED;
 	}
@@ -2008,33 +1997,33 @@
 		case CCS_DOWNLOAD_STARTUP_PARAMS:	/* Happens in firmware someday */
 			del_timer(&local->timer);
 			if (status == CCS_COMMAND_COMPLETE) {
-				DEBUG(1,
+				dev_dbg(&link->dev,
 				      "ray_cs interrupt download_startup_parameters OK\n");
 			} else {
-				DEBUG(1,
+				dev_dbg(&link->dev,
 				      "ray_cs interrupt download_startup_parameters fail\n");
 			}
 			break;
 		case CCS_UPDATE_PARAMS:
-			DEBUG(1, "ray_cs interrupt update params done\n");
+			dev_dbg(&link->dev, "ray_cs interrupt update params done\n");
 			if (status != CCS_COMMAND_COMPLETE) {
 				tmp =
 				    readb(&pccs->var.update_param.
 					  failure_cause);
-				DEBUG(0,
+				dev_dbg(&link->dev,
 				      "ray_cs interrupt update params failed - reason %d\n",
 				      tmp);
 			}
 			break;
 		case CCS_REPORT_PARAMS:
-			DEBUG(1, "ray_cs interrupt report params done\n");
+			dev_dbg(&link->dev, "ray_cs interrupt report params done\n");
 			break;
 		case CCS_UPDATE_MULTICAST_LIST:	/* Note that this CCS isn't returned */
-			DEBUG(1,
+			dev_dbg(&link->dev,
 			      "ray_cs interrupt CCS Update Multicast List done\n");
 			break;
 		case CCS_UPDATE_POWER_SAVINGS_MODE:
-			DEBUG(1,
+			dev_dbg(&link->dev,
 			      "ray_cs interrupt update power save mode done\n");
 			break;
 		case CCS_START_NETWORK:
@@ -2043,11 +2032,11 @@
 				if (readb
 				    (&pccs->var.start_network.net_initiated) ==
 				    1) {
-					DEBUG(0,
+					dev_dbg(&link->dev,
 					      "ray_cs interrupt network \"%s\" started\n",
 					      local->sparm.b4.a_current_ess_id);
 				} else {
-					DEBUG(0,
+					dev_dbg(&link->dev,
 					      "ray_cs interrupt network \"%s\" joined\n",
 					      local->sparm.b4.a_current_ess_id);
 				}
@@ -2075,12 +2064,12 @@
 				local->timer.expires = jiffies + HZ * 5;
 				local->timer.data = (long)local;
 				if (status == CCS_START_NETWORK) {
-					DEBUG(0,
+					dev_dbg(&link->dev,
 					      "ray_cs interrupt network \"%s\" start failed\n",
 					      local->sparm.b4.a_current_ess_id);
 					local->timer.function = &start_net;
 				} else {
-					DEBUG(0,
+					dev_dbg(&link->dev,
 					      "ray_cs interrupt network \"%s\" join failed\n",
 					      local->sparm.b4.a_current_ess_id);
 					local->timer.function = &join_net;
@@ -2091,19 +2080,19 @@
 		case CCS_START_ASSOCIATION:
 			if (status == CCS_COMMAND_COMPLETE) {
 				local->card_status = CARD_ASSOC_COMPLETE;
-				DEBUG(0, "ray_cs association successful\n");
+				dev_dbg(&link->dev, "ray_cs association successful\n");
 			} else {
-				DEBUG(0, "ray_cs association failed,\n");
+				dev_dbg(&link->dev, "ray_cs association failed,\n");
 				local->card_status = CARD_ASSOC_FAILED;
 				join_net((u_long) local);
 			}
 			break;
 		case CCS_TX_REQUEST:
 			if (status == CCS_COMMAND_COMPLETE) {
-				DEBUG(3,
+				dev_dbg(&link->dev,
 				      "ray_cs interrupt tx request complete\n");
 			} else {
-				DEBUG(1,
+				dev_dbg(&link->dev,
 				      "ray_cs interrupt tx request failed\n");
 			}
 			if (!sniffer)
@@ -2111,21 +2100,21 @@
 			netif_wake_queue(dev);
 			break;
 		case CCS_TEST_MEMORY:
-			DEBUG(1, "ray_cs interrupt mem test done\n");
+			dev_dbg(&link->dev, "ray_cs interrupt mem test done\n");
 			break;
 		case CCS_SHUTDOWN:
-			DEBUG(1,
+			dev_dbg(&link->dev,
 			      "ray_cs interrupt Unexpected CCS returned - Shutdown\n");
 			break;
 		case CCS_DUMP_MEMORY:
-			DEBUG(1, "ray_cs interrupt dump memory done\n");
+			dev_dbg(&link->dev, "ray_cs interrupt dump memory done\n");
 			break;
 		case CCS_START_TIMER:
-			DEBUG(2,
+			dev_dbg(&link->dev,
 			      "ray_cs interrupt DING - raylink timer expired\n");
 			break;
 		default:
-			DEBUG(1,
+			dev_dbg(&link->dev,
 			      "ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",
 			      rcsindex, cmd);
 		}
@@ -2139,7 +2128,7 @@
 			ray_rx(dev, local, prcs);
 			break;
 		case REJOIN_NET_COMPLETE:
-			DEBUG(1, "ray_cs interrupt rejoin net complete\n");
+			dev_dbg(&link->dev, "ray_cs interrupt rejoin net complete\n");
 			local->card_status = CARD_ACQ_COMPLETE;
 			/* do we need to clear tx buffers CCS's? */
 			if (local->sparm.b4.a_network_type == ADHOC) {
@@ -2149,7 +2138,7 @@
 				memcpy_fromio(&local->bss_id,
 					      prcs->var.rejoin_net_complete.
 					      bssid, ADDRLEN);
-				DEBUG(1,
+				dev_dbg(&link->dev,
 				      "ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",
 				      local->bss_id[0], local->bss_id[1],
 				      local->bss_id[2], local->bss_id[3],
@@ -2159,15 +2148,15 @@
 			}
 			break;
 		case ROAMING_INITIATED:
-			DEBUG(1, "ray_cs interrupt roaming initiated\n");
+			dev_dbg(&link->dev, "ray_cs interrupt roaming initiated\n");
 			netif_stop_queue(dev);
 			local->card_status = CARD_DOING_ACQ;
 			break;
 		case JAPAN_CALL_SIGN_RXD:
-			DEBUG(1, "ray_cs interrupt japan call sign rx\n");
+			dev_dbg(&link->dev, "ray_cs interrupt japan call sign rx\n");
 			break;
 		default:
-			DEBUG(1,
+			dev_dbg(&link->dev,
 			      "ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",
 			      rcsindex,
 			      (unsigned int)readb(&prcs->interrupt_id));
@@ -2186,7 +2175,7 @@
 	int rx_len;
 	unsigned int pkt_addr;
 	void __iomem *pmsg;
-	DEBUG(4, "ray_rx process rx packet\n");
+	pr_debug("ray_rx process rx packet\n");
 
 	/* Calculate address of packet within Rx buffer */
 	pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8)
@@ -2199,28 +2188,28 @@
 	pmsg = local->rmem + pkt_addr;
 	switch (readb(pmsg)) {
 	case DATA_TYPE:
-		DEBUG(4, "ray_rx data type\n");
+		pr_debug("ray_rx data type\n");
 		rx_data(dev, prcs, pkt_addr, rx_len);
 		break;
 	case AUTHENTIC_TYPE:
-		DEBUG(4, "ray_rx authentic type\n");
+		pr_debug("ray_rx authentic type\n");
 		if (sniffer)
 			rx_data(dev, prcs, pkt_addr, rx_len);
 		else
 			rx_authenticate(local, prcs, pkt_addr, rx_len);
 		break;
 	case DEAUTHENTIC_TYPE:
-		DEBUG(4, "ray_rx deauth type\n");
+		pr_debug("ray_rx deauth type\n");
 		if (sniffer)
 			rx_data(dev, prcs, pkt_addr, rx_len);
 		else
 			rx_deauthenticate(local, prcs, pkt_addr, rx_len);
 		break;
 	case NULL_MSG_TYPE:
-		DEBUG(3, "ray_cs rx NULL msg\n");
+		pr_debug("ray_cs rx NULL msg\n");
 		break;
 	case BEACON_TYPE:
-		DEBUG(4, "ray_rx beacon type\n");
+		pr_debug("ray_rx beacon type\n");
 		if (sniffer)
 			rx_data(dev, prcs, pkt_addr, rx_len);
 
@@ -2233,7 +2222,7 @@
 		ray_get_stats(dev);
 		break;
 	default:
-		DEBUG(0, "ray_cs unknown pkt type %2x\n",
+		pr_debug("ray_cs unknown pkt type %2x\n",
 		      (unsigned int)readb(pmsg));
 		break;
 	}
@@ -2262,7 +2251,7 @@
 			    rx_len >
 			    (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
 			     FCS_LEN)) {
-				DEBUG(0,
+				pr_debug(
 				      "ray_cs invalid packet length %d received \n",
 				      rx_len);
 				return;
@@ -2273,17 +2262,17 @@
 			    rx_len >
 			    (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
 			     FCS_LEN)) {
-				DEBUG(0,
+				pr_debug(
 				      "ray_cs invalid packet length %d received \n",
 				      rx_len);
 				return;
 			}
 		}
 	}
-	DEBUG(4, "ray_cs rx_data packet\n");
+	pr_debug("ray_cs rx_data packet\n");
 	/* If fragmented packet, verify sizes of fragments add up */
 	if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
-		DEBUG(1, "ray_cs rx'ed fragment\n");
+		pr_debug("ray_cs rx'ed fragment\n");
 		tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8)
 		    + readb(&prcs->var.rx_packet.totalpacketlength[1]);
 		total_len = tmp;
@@ -2301,7 +2290,7 @@
 		} while (1);
 
 		if (tmp < 0) {
-			DEBUG(0,
+			pr_debug(
 			      "ray_cs rx_data fragment lengths don't add up\n");
 			local->stats.rx_dropped++;
 			release_frag_chain(local, prcs);
@@ -2313,7 +2302,7 @@
 
 	skb = dev_alloc_skb(total_len + 5);
 	if (skb == NULL) {
-		DEBUG(0, "ray_cs rx_data could not allocate skb\n");
+		pr_debug("ray_cs rx_data could not allocate skb\n");
 		local->stats.rx_dropped++;
 		if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF)
 			release_frag_chain(local, prcs);
@@ -2321,7 +2310,7 @@
 	}
 	skb_reserve(skb, 2);	/* Align IP on 16 byte (TBD check this) */
 
-	DEBUG(4, "ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
+	pr_debug("ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
 	      rx_len);
 
 /************************/
@@ -2354,7 +2343,7 @@
 	tmp = 17;
 	if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
 		prcslink = prcs;
-		DEBUG(1, "ray_cs rx_data in fragment loop\n");
+		pr_debug("ray_cs rx_data in fragment loop\n");
 		do {
 			prcslink = rcs_base(local)
 			    +
@@ -2426,8 +2415,8 @@
 	memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN);
 	memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN);
 
-#ifdef PCMCIA_DEBUG
-	if (pc_debug > 3) {
+#if 0
+	if {
 		print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
 			       DUMP_PREFIX_NONE, 16, 1,
 			       skb->data, 64, true);
@@ -2441,7 +2430,7 @@
 
 	if (psnap->dsap != 0xaa || psnap->ssap != 0xaa || psnap->ctrl != 3) {
 		/* not a snap type so leave it alone */
-		DEBUG(3, "ray_cs untranslate NOT SNAP %02x %02x %02x\n",
+		pr_debug("ray_cs untranslate NOT SNAP %02x %02x %02x\n",
 		      psnap->dsap, psnap->ssap, psnap->ctrl);
 
 		delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
@@ -2450,7 +2439,7 @@
 	} else { /* Its a SNAP */
 		if (memcmp(psnap->org, org_bridge, 3) == 0) {
 		/* EtherII and nuke the LLC */
-			DEBUG(3, "ray_cs untranslate Bridge encap\n");
+			pr_debug("ray_cs untranslate Bridge encap\n");
 			delta = RX_MAC_HEADER_LENGTH
 			    + sizeof(struct snaphdr_t) - ETH_HLEN;
 			peth = (struct ethhdr *)(skb->data + delta);
@@ -2459,14 +2448,14 @@
 			switch (ntohs(type)) {
 			case ETH_P_IPX:
 			case ETH_P_AARP:
-				DEBUG(3, "ray_cs untranslate RFC IPX/AARP\n");
+				pr_debug("ray_cs untranslate RFC IPX/AARP\n");
 				delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
 				peth = (struct ethhdr *)(skb->data + delta);
 				peth->h_proto =
 				    htons(len - RX_MAC_HEADER_LENGTH);
 				break;
 			default:
-				DEBUG(3, "ray_cs untranslate RFC default\n");
+				pr_debug("ray_cs untranslate RFC default\n");
 				delta = RX_MAC_HEADER_LENGTH +
 				    sizeof(struct snaphdr_t) - ETH_HLEN;
 				peth = (struct ethhdr *)(skb->data + delta);
@@ -2482,12 +2471,12 @@
 	}
 /* TBD reserve  skb_reserve(skb, delta); */
 	skb_pull(skb, delta);
-	DEBUG(3, "untranslate after skb_pull(%d), skb->data = %p\n", delta,
+	pr_debug("untranslate after skb_pull(%d), skb->data = %p\n", delta,
 	      skb->data);
 	memcpy(peth->h_dest, destaddr, ADDRLEN);
 	memcpy(peth->h_source, srcaddr, ADDRLEN);
-#ifdef PCMCIA_DEBUG
-	if (pc_debug > 3) {
+#if 0
+	{
 		int i;
 		printk(KERN_DEBUG "skb->data after untranslate:");
 		for (i = 0; i < 64; i++)
@@ -2529,7 +2518,7 @@
 	while (tmp--) {
 		writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
 		if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
-			DEBUG(1, "ray_cs interrupt bad rcsindex = 0x%x\n",
+			pr_debug("ray_cs interrupt bad rcsindex = 0x%x\n",
 			      rcsindex);
 			break;
 		}
@@ -2543,9 +2532,9 @@
 static void authenticate(ray_dev_t *local)
 {
 	struct pcmcia_device *link = local->finder;
-	DEBUG(0, "ray_cs Starting authentication.\n");
+	dev_dbg(&link->dev, "ray_cs Starting authentication.\n");
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs authenticate - device not present\n");
+		dev_dbg(&link->dev, "ray_cs authenticate - device not present\n");
 		return;
 	}
 
@@ -2573,11 +2562,11 @@
 	copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
 	/* if we are trying to get authenticated */
 	if (local->sparm.b4.a_network_type == ADHOC) {
-		DEBUG(1, "ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
+		pr_debug("ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n",
 		      msg->var[0], msg->var[1], msg->var[2], msg->var[3],
 		      msg->var[4], msg->var[5]);
 		if (msg->var[2] == 1) {
-			DEBUG(0, "ray_cs Sending authentication response.\n");
+			pr_debug("ray_cs Sending authentication response.\n");
 			if (!build_auth_frame
 			    (local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) {
 				local->authentication_state = NEED_TO_AUTH;
@@ -2591,13 +2580,13 @@
 			/* Verify authentication sequence #2 and success */
 			if (msg->var[2] == 2) {
 				if ((msg->var[3] | msg->var[4]) == 0) {
-					DEBUG(1, "Authentication successful\n");
+					pr_debug("Authentication successful\n");
 					local->card_status = CARD_AUTH_COMPLETE;
 					associate(local);
 					local->authentication_state =
 					    AUTHENTICATED;
 				} else {
-					DEBUG(0, "Authentication refused\n");
+					pr_debug("Authentication refused\n");
 					local->card_status = CARD_AUTH_REFUSED;
 					join_net((u_long) local);
 					local->authentication_state =
@@ -2617,22 +2606,22 @@
 	struct net_device *dev = link->priv;
 	int ccsindex;
 	if (!(pcmcia_dev_present(link))) {
-		DEBUG(2, "ray_cs associate - device not present\n");
+		dev_dbg(&link->dev, "ray_cs associate - device not present\n");
 		return;
 	}
 	/* If no tx buffers available, return */
 	if ((ccsindex = get_free_ccs(local)) < 0) {
 /* TBD should never be here but... what if we are? */
-		DEBUG(1, "ray_cs associate - No free ccs\n");
+		dev_dbg(&link->dev, "ray_cs associate - No free ccs\n");
 		return;
 	}
-	DEBUG(1, "ray_cs Starting association with access point\n");
+	dev_dbg(&link->dev, "ray_cs Starting association with access point\n");
 	pccs = ccs_base(local) + ccsindex;
 	/* fill in the CCS */
 	writeb(CCS_START_ASSOCIATION, &pccs->cmd);
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(1, "ray_cs associate failed - ECF not ready for intr\n");
+		dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
 		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
 
 		del_timer(&local->timer);
@@ -2655,7 +2644,7 @@
 /*  UCHAR buff[256];
     struct rx_msg *msg = (struct rx_msg *)buff;
 */
-	DEBUG(0, "Deauthentication frame received\n");
+	pr_debug("Deauthentication frame received\n");
 	local->authentication_state = UNAUTHENTICATED;
 	/* Need to reauthenticate or rejoin depending on reason code */
 /*  copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
@@ -2823,7 +2812,7 @@
 
 	/* If no tx buffers available, return */
 	if ((ccsindex = get_free_tx_ccs(local)) < 0) {
-		DEBUG(1, "ray_cs send authenticate - No free tx ccs\n");
+		pr_debug("ray_cs send authenticate - No free tx ccs\n");
 		return -1;
 	}
 
@@ -2855,7 +2844,7 @@
 
 	/* Interrupt the firmware to process the command */
 	if (interrupt_ecf(local, ccsindex)) {
-		DEBUG(1,
+		pr_debug(
 		      "ray_cs send authentication request failed - ECF not ready for intr\n");
 		writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
 		return -1;
@@ -2865,18 +2854,8 @@
 
 /*===========================================================================*/
 #ifdef CONFIG_PROC_FS
-static void raycs_write(const char *name, write_proc_t *w, void *data)
-{
-	struct proc_dir_entry *entry =
-	    create_proc_entry(name, S_IFREG | S_IWUSR, NULL);
-	if (entry) {
-		entry->write_proc = w;
-		entry->data = data;
-	}
-}
-
-static int write_essid(struct file *file, const char __user *buffer,
-		       unsigned long count, void *data)
+static ssize_t ray_cs_essid_proc_write(struct file *file,
+		const char __user *buffer, size_t count, loff_t *pos)
 {
 	static char proc_essid[33];
 	unsigned int len = count;
@@ -2890,8 +2869,13 @@
 	return count;
 }
 
-static int write_int(struct file *file, const char __user *buffer,
-		     unsigned long count, void *data)
+static const struct file_operations ray_cs_essid_proc_fops = {
+	.owner		= THIS_MODULE,
+	.write		= ray_cs_essid_proc_write,
+};
+
+static ssize_t int_proc_write(struct file *file, const char __user *buffer,
+			      size_t count, loff_t *pos)
 {
 	static char proc_number[10];
 	char *p;
@@ -2914,9 +2898,14 @@
 		nr = nr * 10 + c;
 		p++;
 	} while (--len);
-	*(int *)data = nr;
+	*(int *)PDE(file->f_path.dentry->d_inode)->data = nr;
 	return count;
 }
+
+static const struct file_operations int_proc_fops = {
+	.owner		= THIS_MODULE,
+	.write		= int_proc_write,
+};
 #endif
 
 static struct pcmcia_device_id ray_ids[] = {
@@ -2942,18 +2931,18 @@
 {
 	int rc;
 
-	DEBUG(1, "%s\n", rcsid);
+	pr_debug("%s\n", rcsid);
 	rc = pcmcia_register_driver(&ray_driver);
-	DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",
+	pr_debug("raylink init_module register_pcmcia_driver returns 0x%x\n",
 	      rc);
 
 #ifdef CONFIG_PROC_FS
 	proc_mkdir("driver/ray_cs", NULL);
 
 	proc_create("driver/ray_cs/ray_cs", 0, NULL, &ray_cs_proc_fops);
-	raycs_write("driver/ray_cs/essid", write_essid, NULL);
-	raycs_write("driver/ray_cs/net_type", write_int, &net_type);
-	raycs_write("driver/ray_cs/translate", write_int, &translate);
+	proc_create("driver/ray_cs/essid", S_IWUSR, NULL, &ray_cs_essid_proc_fops);
+	proc_create_data("driver/ray_cs/net_type", S_IWUSR, NULL, &int_proc_fops, &net_type);
+	proc_create_data("driver/ray_cs/translate", S_IWUSR, NULL, &int_proc_fops, &translate);
 #endif
 	if (translate != 0)
 		translate = 1;
@@ -2964,7 +2953,7 @@
 
 static void __exit exit_ray_cs(void)
 {
-	DEBUG(0, "ray_cs: cleanup_module\n");
+	pr_debug("ray_cs: cleanup_module\n");
 
 #ifdef CONFIG_PROC_FS
 	remove_proc_entry("driver/ray_cs/ray_cs", NULL);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 54175b6..2ecbedb 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -83,11 +83,11 @@
 	"set roaming tendency: 0=aggressive, 1=moderate, "
 				"2=conservative (default: moderate)");
 
-static int modparam_workaround_interval = 500;
+static int modparam_workaround_interval;
 module_param_named(workaround_interval, modparam_workaround_interval,
 							int, 0444);
 MODULE_PARM_DESC(workaround_interval,
-	"set stall workaround interval in msecs (default: 500)");
+	"set stall workaround interval in msecs (0=disabled) (default: 0)");
 
 
 /* various RNDIS OID defs */
@@ -733,12 +733,13 @@
 			le32_to_cpu(u.get_c->status));
 
 	if (ret == 0) {
+		memcpy(data, u.buf + le32_to_cpu(u.get_c->offset) + 8, *len);
+
 		ret = le32_to_cpu(u.get_c->len);
 		if (ret > *len)
 			*len = ret;
-		memcpy(data, u.buf + le32_to_cpu(u.get_c->offset) + 8, *len);
-		ret = rndis_error_status(u.get_c->status);
 
+		ret = rndis_error_status(u.get_c->status);
 		if (ret < 0)
 			devdbg(dev, "rndis_query_oid(%s): device returned "
 				"error,  0x%08x (%d)", oid_to_string(oid),
@@ -1072,6 +1073,8 @@
 		auth_mode = NDIS_80211_AUTH_SHARED;
 	else if (auth_type == NL80211_AUTHTYPE_OPEN_SYSTEM)
 		auth_mode = NDIS_80211_AUTH_OPEN;
+	else if (auth_type == NL80211_AUTHTYPE_AUTOMATIC)
+		auth_mode = NDIS_80211_AUTH_AUTO_SWITCH;
 	else
 		return -ENOTSUPP;
 
@@ -2547,7 +2550,7 @@
 	/* Workaround transfer stalls on poor quality links.
 	 * TODO: find right way to fix these stalls (as stalls do not happen
 	 * with ndiswrapper/windows driver). */
-	if (priv->last_qual <= 25) {
+	if (priv->param_workaround_interval > 0 && priv->last_qual <= 25) {
 		/* Decrease stats worker interval to catch stalls.
 		 * faster. Faster than 400-500ms causes packet loss,
 		 * Slower doesn't catch stalls fast enough.
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index ed1f997..bf60689 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -1,6 +1,6 @@
 menuconfig RT2X00
 	tristate "Ralink driver support"
-	depends on MAC80211 && WLAN_80211
+	depends on MAC80211
 	---help---
 	  This will enable the support for the Ralink drivers,
 	  developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
@@ -53,6 +53,36 @@
 
 	  When compiled as a module, this driver will be called rt61pci.
 
+config RT2800PCI_PCI
+	tristate
+	depends on PCI
+	default y
+
+config RT2800PCI_SOC
+	tristate
+	depends on RALINK_RT288X || RALINK_RT305X
+	default y
+
+config RT2800PCI
+	tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)"
+	depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
+	select RT2800_LIB
+	select RT2X00_LIB_PCI if RT2800PCI_PCI
+	select RT2X00_LIB_SOC if RT2800PCI_SOC
+	select RT2X00_LIB_HT
+	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_CRYPTO
+	select CRC_CCITT
+	select EEPROM_93CX6
+	---help---
+	  This adds support for rt2800 wireless chipset family.
+	  Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
+
+	  This driver is non-functional at the moment and is intended for
+	  developers.
+
+	  When compiled as a module, this driver will be called "rt2800pci.ko".
+
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
 	depends on USB
@@ -78,8 +108,9 @@
 	  When compiled as a module, this driver will be called rt73usb.
 
 config RT2800USB
-	tristate "Ralink rt2800 (USB) support"
+	tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)"
 	depends on USB && EXPERIMENTAL
+	select RT2800_LIB
 	select RT2X00_LIB_USB
 	select RT2X00_LIB_HT
 	select RT2X00_LIB_FIRMWARE
@@ -89,12 +120,23 @@
 	  This adds experimental support for rt2800 wireless chipset family.
 	  Supported chips: RT2770, RT2870 & RT3070.
 
+	  Known issues:
+	  - support for RT2870 chips doesn't work with 802.11n APs yet
+	  - support for RT3070 chips is non-functional at the moment
+
 	  When compiled as a module, this driver will be called "rt2800usb.ko".
 
+config RT2800_LIB
+	tristate
+
 config RT2X00_LIB_PCI
 	tristate
 	select RT2X00_LIB
 
+config RT2X00_LIB_SOC
+	tristate
+	select RT2X00_LIB
+
 config RT2X00_LIB_USB
 	tristate
 	select RT2X00_LIB
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 13043ea..9713398 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -11,10 +11,13 @@
 
 obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
 obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
+obj-$(CONFIG_RT2X00_LIB_SOC)		+= rt2x00soc.o
 obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00usb.o
+obj-$(CONFIG_RT2800_LIB)		+= rt2800lib.o
 obj-$(CONFIG_RT2400PCI)			+= rt2400pci.o
 obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
 obj-$(CONFIG_RT61PCI)			+= rt61pci.o
+obj-$(CONFIG_RT2800PCI)			+= rt2800pci.o
 obj-$(CONFIG_RT2500USB)			+= rt2500usb.o
 obj-$(CONFIG_RT73USB)			+= rt73usb.o
 obj-$(CONFIG_RT2800USB)			+= rt2800usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 798f625..e7f4640 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -1341,6 +1341,7 @@
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
+	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2420) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF2421)) {
@@ -1431,7 +1432,6 @@
 			       IEEE80211_HW_SIGNAL_DBM |
 			       IEEE80211_HW_SUPPORTS_PS |
 			       IEEE80211_HW_PS_NULLFUNC_STACK;
-	rt2x00dev->hw->extra_tx_headroom = 0;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -1622,20 +1622,21 @@
 };
 
 static const struct rt2x00_ops rt2400pci_ops = {
-	.name		= KBUILD_MODNAME,
-	.max_sta_intf	= 1,
-	.max_ap_intf	= 1,
-	.eeprom_size	= EEPROM_SIZE,
-	.rf_size	= RF_SIZE,
-	.tx_queues	= NUM_TX_QUEUES,
-	.rx		= &rt2400pci_queue_rx,
-	.tx		= &rt2400pci_queue_tx,
-	.bcn		= &rt2400pci_queue_bcn,
-	.atim		= &rt2400pci_queue_atim,
-	.lib		= &rt2400pci_rt2x00_ops,
-	.hw		= &rt2400pci_mac80211_ops,
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 1,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= 0,
+	.rx			= &rt2400pci_queue_rx,
+	.tx			= &rt2400pci_queue_tx,
+	.bcn			= &rt2400pci_queue_bcn,
+	.atim			= &rt2400pci_queue_atim,
+	.lib			= &rt2400pci_rt2x00_ops,
+	.hw			= &rt2400pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt2400pci_rt2x00debug,
+	.debugfs		= &rt2400pci_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index ccd6441..6c21ef6 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 2e872ac..408fcfc 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -1505,6 +1505,7 @@
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
+	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
@@ -1732,8 +1733,6 @@
 			       IEEE80211_HW_SUPPORTS_PS |
 			       IEEE80211_HW_PS_NULLFUNC_STACK;
 
-	rt2x00dev->hw->extra_tx_headroom = 0;
-
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
@@ -1921,20 +1920,21 @@
 };
 
 static const struct rt2x00_ops rt2500pci_ops = {
-	.name		= KBUILD_MODNAME,
-	.max_sta_intf	= 1,
-	.max_ap_intf	= 1,
-	.eeprom_size	= EEPROM_SIZE,
-	.rf_size	= RF_SIZE,
-	.tx_queues	= NUM_TX_QUEUES,
-	.rx		= &rt2500pci_queue_rx,
-	.tx		= &rt2500pci_queue_tx,
-	.bcn		= &rt2500pci_queue_bcn,
-	.atim		= &rt2500pci_queue_atim,
-	.lib		= &rt2500pci_rt2x00_ops,
-	.hw		= &rt2500pci_mac80211_ops,
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 1,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= 0,
+	.rx			= &rt2500pci_queue_rx,
+	.tx			= &rt2500pci_queue_tx,
+	.bcn			= &rt2500pci_queue_bcn,
+	.atim			= &rt2500pci_queue_atim,
+	.lib			= &rt2500pci_rt2x00_ops,
+	.hw			= &rt2500pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt2500pci_rt2x00debug,
+	.debugfs		= &rt2500pci_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 54d3795..b007567 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 22dd6d9..83f2592 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -716,139 +716,6 @@
 }
 
 /*
- * NOTE: This function is directly ported from legacy driver, but
- * despite it being declared it was never called. Although link tuning
- * sounds like a good idea, and usually works well for the other drivers,
- * it does _not_ work with rt2500usb. Enabling this function will result
- * in TX capabilities only until association kicks in. Immediately
- * after the successful association all TX frames will be kept in the
- * hardware queue and never transmitted.
- */
-#if 0
-static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
-{
-	int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
-	u16 bbp_thresh;
-	u16 vgc_bound;
-	u16 sens;
-	u16 r24;
-	u16 r25;
-	u16 r61;
-	u16 r17_sens;
-	u8 r17;
-	u8 up_bound;
-	u8 low_bound;
-
-	/*
-	 * Read current r17 value, as well as the sensitivity values
-	 * for the r17 register.
-	 */
-	rt2500usb_bbp_read(rt2x00dev, 17, &r17);
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
-	up_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
-	low_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCLOWER);
-
-	/*
-	 * If we are not associated, we should go straight to the
-	 * dynamic CCA tuning.
-	 */
-	if (!rt2x00dev->intf_associated)
-		goto dynamic_cca_tune;
-
-	/*
-	 * Determine the BBP tuning threshold and correctly
-	 * set BBP 24, 25 and 61.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
-	bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
-
-	if ((rssi + bbp_thresh) > 0) {
-		r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
-		r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
-		r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
-	} else {
-		r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
-		r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
-		r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
-	}
-
-	rt2500usb_bbp_write(rt2x00dev, 24, r24);
-	rt2500usb_bbp_write(rt2x00dev, 25, r25);
-	rt2500usb_bbp_write(rt2x00dev, 61, r61);
-
-	/*
-	 * A too low RSSI will cause too much false CCA which will
-	 * then corrupt the R17 tuning. To remidy this the tuning should
-	 * be stopped (While making sure the R17 value will not exceed limits)
-	 */
-	if (rssi >= -40) {
-		if (r17 != 0x60)
-			rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
-		return;
-	}
-
-	/*
-	 * Special big-R17 for short distance
-	 */
-	if (rssi >= -58) {
-		sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
-		if (r17 != sens)
-			rt2500usb_bbp_write(rt2x00dev, 17, sens);
-		return;
-	}
-
-	/*
-	 * Special mid-R17 for middle distance
-	 */
-	if (rssi >= -74) {
-		sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
-		if (r17 != sens)
-			rt2500usb_bbp_write(rt2x00dev, 17, sens);
-		return;
-	}
-
-	/*
-	 * Leave short or middle distance condition, restore r17
-	 * to the dynamic tuning range.
-	 */
-	low_bound = 0x32;
-	if (rssi < -77)
-		up_bound -= (-77 - rssi);
-
-	if (up_bound < low_bound)
-		up_bound = low_bound;
-
-	if (r17 > up_bound) {
-		rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
-		rt2x00dev->link.vgc_level = up_bound;
-		return;
-	}
-
-dynamic_cca_tune:
-
-	/*
-	 * R17 is inside the dynamic tuning range,
-	 * start tuning the link based on the false cca counter.
-	 */
-	if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
-		rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
-		rt2x00dev->link.vgc_level = r17;
-	} else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
-		rt2500usb_bbp_write(rt2x00dev, 17, --r17);
-		rt2x00dev->link.vgc_level = r17;
-	}
-}
-#else
-#define rt2500usb_link_tuner	NULL
-#endif
-
-/*
  * Initialization functions.
  */
 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
@@ -1542,6 +1409,7 @@
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
+	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
 	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
@@ -1788,8 +1656,6 @@
 	    IEEE80211_HW_SUPPORTS_PS |
 	    IEEE80211_HW_PS_NULLFUNC_STACK;
 
-	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
-
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
 				rt2x00_eeprom_addr(rt2x00dev,
@@ -1910,7 +1776,6 @@
 	.rfkill_poll		= rt2500usb_rfkill_poll,
 	.link_stats		= rt2500usb_link_stats,
 	.reset_tuner		= rt2500usb_reset_tuner,
-	.link_tuner		= rt2500usb_link_tuner,
 	.write_tx_desc		= rt2500usb_write_tx_desc,
 	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt2500usb_write_beacon,
@@ -1956,20 +1821,21 @@
 };
 
 static const struct rt2x00_ops rt2500usb_ops = {
-	.name		= KBUILD_MODNAME,
-	.max_sta_intf	= 1,
-	.max_ap_intf	= 1,
-	.eeprom_size	= EEPROM_SIZE,
-	.rf_size	= RF_SIZE,
-	.tx_queues	= NUM_TX_QUEUES,
-	.rx		= &rt2500usb_queue_rx,
-	.tx		= &rt2500usb_queue_tx,
-	.bcn		= &rt2500usb_queue_bcn,
-	.atim		= &rt2500usb_queue_atim,
-	.lib		= &rt2500usb_rt2x00_ops,
-	.hw		= &rt2500usb_mac80211_ops,
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 1,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= TXD_DESC_SIZE,
+	.rx			= &rt2500usb_queue_rx,
+	.tx			= &rt2500usb_queue_tx,
+	.bcn			= &rt2500usb_queue_bcn,
+	.atim			= &rt2500usb_queue_atim,
+	.lib			= &rt2500usb_rt2x00_ops,
+	.hw			= &rt2500usb_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt2500usb_rt2x00debug,
+	.debugfs		= &rt2500usb_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b01edca..341a704 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
new file mode 100644
index 0000000..c5fe867
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -0,0 +1,1852 @@
+/*
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
+	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+	Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
+	Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+	Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
+	Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+	Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800
+	Abstract: Data structures and registers for the rt2800 modules.
+	Supported chipsets: RT2800E, RT2800ED & RT2800U.
+ */
+
+#ifndef RT2800_H
+#define RT2800_H
+
+/*
+ * RF chip defines.
+ *
+ * RF2820 2.4G 2T3R
+ * RF2850 2.4G/5G 2T3R
+ * RF2720 2.4G 1T2R
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+ * RF3021 2.4G 1T2R
+ * RF3022 2.4G 2T2R
+ * RF3052 2.4G 2T2R
+ */
+#define RF2820				0x0001
+#define RF2850				0x0002
+#define RF2720				0x0003
+#define RF2750				0x0004
+#define RF3020				0x0005
+#define RF2020				0x0006
+#define RF3021				0x0007
+#define RF3022				0x0008
+#define RF3052				0x0009
+
+/*
+ * Chipset version.
+ */
+#define RT2860C_VERSION			0x28600100
+#define RT2860D_VERSION			0x28600101
+#define RT2880E_VERSION			0x28720200
+#define RT2883_VERSION			0x28830300
+#define RT3070_VERSION			0x30700200
+
+/*
+ * Signal information.
+ * Default offset is required for RSSI <-> dBm conversion.
+ */
+#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE			0x1000
+#define CSR_REG_SIZE			0x0800
+#define EEPROM_BASE			0x0000
+#define EEPROM_SIZE			0x0110
+#define BBP_BASE			0x0000
+#define BBP_SIZE			0x0080
+#define RF_BASE				0x0004
+#define RF_SIZE				0x0010
+
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES			4
+
+/*
+ * USB registers.
+ */
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
+ */
+#define INT_SOURCE_CSR			0x0200
+#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
+#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
+#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
+#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ */
+#define INT_MASK_CSR			0x0204
+#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
+#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
+#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
+#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * WPDMA_GLO_CFG
+ */
+#define WPDMA_GLO_CFG 			0x0208
+#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
+#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
+#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
+#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
+#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
+#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
+#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
+
+/*
+ * WPDMA_RST_IDX
+ */
+#define WPDMA_RST_IDX 			0x020c
+#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
+#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
+#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
+#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
+#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
+#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
+#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
+
+/*
+ * DELAY_INT_CFG
+ */
+#define DELAY_INT_CFG			0x0210
+#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
+#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
+#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
+#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
+#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
+#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
+
+/*
+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+ * AIFSN0: AC_BE
+ * AIFSN1: AC_BK
+ * AIFSN2: AC_VI
+ * AIFSN3: AC_VO
+ */
+#define WMM_AIFSN_CFG			0x0214
+#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
+#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
+#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
+#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
+ * CWMIN0: AC_BE
+ * CWMIN1: AC_BK
+ * CWMIN2: AC_VI
+ * CWMIN3: AC_VO
+ */
+#define WMM_CWMIN_CFG			0x0218
+#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
+#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
+#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
+#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
+ * CWMAX0: AC_BE
+ * CWMAX1: AC_BK
+ * CWMAX2: AC_VI
+ * CWMAX3: AC_VO
+ */
+#define WMM_CWMAX_CFG			0x021c
+#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
+#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
+#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
+#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
+
+/*
+ * AC_TXOP0: AC_BK/AC_BE TXOP register
+ * AC0TXOP: AC_BK in unit of 32us
+ * AC1TXOP: AC_BE in unit of 32us
+ */
+#define WMM_TXOP0_CFG			0x0220
+#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP1: AC_VO/AC_VI TXOP register
+ * AC2TXOP: AC_VI in unit of 32us
+ * AC3TXOP: AC_VO in unit of 32us
+ */
+#define WMM_TXOP1_CFG			0x0224
+#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
+
+/*
+ * GPIO_CTRL_CFG:
+ */
+#define GPIO_CTRL_CFG			0x0228
+#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
+#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
+#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
+#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
+#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
+#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
+#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
+#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
+#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
+
+/*
+ * MCU_CMD_CFG
+ */
+#define MCU_CMD_CFG			0x022c
+
+/*
+ * AC_BK register offsets
+ */
+#define TX_BASE_PTR0			0x0230
+#define TX_MAX_CNT0			0x0234
+#define TX_CTX_IDX0			0x0238
+#define TX_DTX_IDX0			0x023c
+
+/*
+ * AC_BE register offsets
+ */
+#define TX_BASE_PTR1			0x0240
+#define TX_MAX_CNT1			0x0244
+#define TX_CTX_IDX1			0x0248
+#define TX_DTX_IDX1			0x024c
+
+/*
+ * AC_VI register offsets
+ */
+#define TX_BASE_PTR2			0x0250
+#define TX_MAX_CNT2			0x0254
+#define TX_CTX_IDX2			0x0258
+#define TX_DTX_IDX2			0x025c
+
+/*
+ * AC_VO register offsets
+ */
+#define TX_BASE_PTR3			0x0260
+#define TX_MAX_CNT3			0x0264
+#define TX_CTX_IDX3			0x0268
+#define TX_DTX_IDX3			0x026c
+
+/*
+ * HCCA register offsets
+ */
+#define TX_BASE_PTR4			0x0270
+#define TX_MAX_CNT4			0x0274
+#define TX_CTX_IDX4			0x0278
+#define TX_DTX_IDX4			0x027c
+
+/*
+ * MGMT register offsets
+ */
+#define TX_BASE_PTR5			0x0280
+#define TX_MAX_CNT5			0x0284
+#define TX_CTX_IDX5			0x0288
+#define TX_DTX_IDX5			0x028c
+
+/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR			0x0290
+#define RX_MAX_CNT			0x0294
+#define RX_CRX_IDX			0x0298
+#define RX_DRX_IDX			0x029c
+
+/*
+ * PBF_SYS_CTRL
+ * HOST_RAM_WRITE: enable Host program ram write selection
+ */
+#define PBF_SYS_CTRL			0x0400
+#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
+#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
+
+/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR			0x0404
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define PBF_CFG				0x0408
+#define PBF_MAX_PCNT			0x040c
+#define PBF_CTRL			0x0410
+#define PBF_INT_STA			0x0414
+#define PBF_INT_ENA			0x0418
+
+/*
+ * BCN_OFFSET0:
+ */
+#define BCN_OFFSET0			0x042c
+#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
+#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
+#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
+#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
+
+/*
+ * BCN_OFFSET1:
+ */
+#define BCN_OFFSET1			0x0430
+#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
+#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
+#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
+#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define TXRXQ_PCNT			0x0438
+#define PBF_DBG				0x043c
+
+/*
+ * RF registers
+ */
+#define	RF_CSR_CFG			0x0500
+#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
+
+/*
+ * EFUSE_CSR: RT30x0 EEPROM
+ */
+#define EFUSE_CTRL			0x0580
+#define EFUSE_CTRL_ADDRESS_IN		FIELD32(0x03fe0000)
+#define EFUSE_CTRL_MODE			FIELD32(0x000000c0)
+#define EFUSE_CTRL_KICK			FIELD32(0x40000000)
+#define EFUSE_CTRL_PRESENT		FIELD32(0x80000000)
+
+/*
+ * EFUSE_DATA0
+ */
+#define EFUSE_DATA0			0x0590
+
+/*
+ * EFUSE_DATA1
+ */
+#define EFUSE_DATA1			0x0594
+
+/*
+ * EFUSE_DATA2
+ */
+#define EFUSE_DATA2			0x0598
+
+/*
+ * EFUSE_DATA3
+ */
+#define EFUSE_DATA3			0x059c
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ * ASIC_REV: 0
+ * ASIC_VER: 2860 or 2870
+ */
+#define MAC_CSR0			0x1000
+#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
+#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
+
+/*
+ * MAC_SYS_CTRL:
+ */
+#define MAC_SYS_CTRL			0x1004
+#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
+#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
+#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
+#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
+#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
+#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
+#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
+#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
+
+/*
+ * MAC_ADDR_DW0: STA MAC register 0
+ */
+#define MAC_ADDR_DW0			0x1008
+#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_ADDR_DW1: STA MAC register 1
+ * UNICAST_TO_ME_MASK:
+ * Used to mask off bits from byte 5 of the MAC address
+ * to determine the UNICAST_TO_ME bit for RX frames.
+ * The full mask is complemented by BSS_ID_MASK:
+ *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
+ */
+#define MAC_ADDR_DW1			0x100c
+#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
+
+/*
+ * MAC_BSSID_DW0: BSSID register 0
+ */
+#define MAC_BSSID_DW0			0x1010
+#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_BSSID_DW1: BSSID register 1
+ * BSS_ID_MASK:
+ *     0: 1-BSSID mode (BSS index = 0)
+ *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
+ *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
+ *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
+ * BSSID. This will make sure that those bits will be ignored
+ * when determining the MY_BSS of RX frames.
+ */
+#define MAC_BSSID_DW1			0x1014
+#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
+#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
+
+/*
+ * MAX_LEN_CFG: Maximum frame length register.
+ * MAX_MPDU: rt2860b max 16k bytes
+ * MAX_PSDU: Maximum PSDU length
+ *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
+ */
+#define MAX_LEN_CFG			0x1018
+#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
+#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
+#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
+#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
+
+/*
+ * BBP_CSR_CFG: BBP serial control register
+ * VALUE: Register value to program into BBP
+ * REG_NUM: Selected BBP register
+ * READ_CONTROL: 0 write BBP, 1 read BBP
+ * BUSY: ASIC is busy executing BBP commands
+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
+ * BBP_RW_MODE: 0 serial, 1 paralell
+ */
+#define BBP_CSR_CFG			0x101c
+#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
+#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
+#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
+#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
+#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
+#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
+
+/*
+ * RF_CSR_CFG0: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * BITWIDTH: Selected RF register
+ * STANDBYMODE: 0 high when standby, 1 low when standby
+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
+ * BUSY: ASIC is busy executing RF commands
+ */
+#define RF_CSR_CFG0			0x1020
+#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
+#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
+#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
+#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
+#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
+
+/*
+ * RF_CSR_CFG1: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG1			0x1024
+#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
+
+/*
+ * RF_CSR_CFG2: RF control register
+ * VALUE: Register value to program into RF
+ */
+#define RF_CSR_CFG2			0x1028
+#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
+
+/*
+ * LED_CFG: LED control
+ * color LED's:
+ *   0: off
+ *   1: blinking upon TX2
+ *   2: periodic slow blinking
+ *   3: always on
+ * LED polarity:
+ *   0: active low
+ *   1: active high
+ */
+#define LED_CFG				0x102c
+#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
+#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
+#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
+#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
+#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
+#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
+#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
+
+/*
+ * XIFS_TIME_CFG: MAC timing
+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
+ *	when MAC doesn't reference BBP signal BBRXEND
+ * EIFS: unit 1us
+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
+ *
+ */
+#define XIFS_TIME_CFG			0x1100
+#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
+#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
+#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
+#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
+#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
+
+/*
+ * BKOFF_SLOT_CFG:
+ */
+#define BKOFF_SLOT_CFG			0x1104
+#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
+#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
+
+/*
+ * NAV_TIME_CFG:
+ */
+#define NAV_TIME_CFG			0x1108
+#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
+#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
+#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
+#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
+
+/*
+ * CH_TIME_CFG: count as channel busy
+ */
+#define CH_TIME_CFG     	        0x110c
+
+/*
+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
+ */
+#define PBF_LIFE_TIMER     	        0x1110
+
+/*
+ * BCN_TIME_CFG:
+ * BEACON_INTERVAL: in unit of 1/16 TU
+ * TSF_TICKING: Enable TSF auto counting
+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ * BEACON_GEN: Enable beacon generator
+ */
+#define BCN_TIME_CFG			0x1114
+#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
+#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
+#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
+#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
+#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
+#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
+
+/*
+ * TBTT_SYNC_CFG:
+ */
+#define TBTT_SYNC_CFG			0x1118
+
+/*
+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
+ */
+#define TSF_TIMER_DW0			0x111c
+#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
+
+/*
+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
+ */
+#define TSF_TIMER_DW1			0x1120
+#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
+
+/*
+ * TBTT_TIMER: TImer remains till next TBTT, read-only
+ */
+#define TBTT_TIMER			0x1124
+
+/*
+ * INT_TIMER_CFG:
+ */
+#define INT_TIMER_CFG			0x1128
+
+/*
+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
+ */
+#define INT_TIMER_EN			0x112c
+
+/*
+ * CH_IDLE_STA: channel idle time
+ */
+#define CH_IDLE_STA			0x1130
+
+/*
+ * CH_BUSY_STA: channel busy time
+ */
+#define CH_BUSY_STA			0x1134
+
+/*
+ * MAC_STATUS_CFG:
+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
+ *	if 1 or higher one of the 2 registers is busy.
+ */
+#define MAC_STATUS_CFG			0x1200
+#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
+
+/*
+ * PWR_PIN_CFG:
+ */
+#define PWR_PIN_CFG			0x1204
+
+/*
+ * AUTOWAKEUP_CFG: Manual power control / status register
+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
+ * AUTOWAKE: 0:sleep, 1:awake
+ */
+#define AUTOWAKEUP_CFG			0x1208
+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
+#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
+
+/*
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG			0x1300
+#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG			0x1304
+#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG			0x1308
+#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG			0x130c
+#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_TID_AC_MAP:
+ */
+#define EDCA_TID_AC_MAP			0x1310
+
+/*
+ * TX_PWR_CFG_0:
+ */
+#define TX_PWR_CFG_0			0x1314
+#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_1:
+ */
+#define TX_PWR_CFG_1			0x1318
+#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_2:
+ */
+#define TX_PWR_CFG_2			0x131c
+#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_3:
+ */
+#define TX_PWR_CFG_3			0x1320
+#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_4:
+ */
+#define TX_PWR_CFG_4			0x1324
+#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
+#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
+#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
+
+/*
+ * TX_PIN_CFG:
+ */
+#define TX_PIN_CFG			0x1328
+#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
+#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
+#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
+#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
+#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
+#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
+#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
+#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
+#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
+#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
+#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
+#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
+#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
+#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
+#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
+#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
+#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
+#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
+#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
+#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
+
+/*
+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
+ */
+#define TX_BAND_CFG			0x132c
+#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
+#define TX_BAND_CFG_A			FIELD32(0x00000002)
+#define TX_BAND_CFG_BG			FIELD32(0x00000004)
+
+/*
+ * TX_SW_CFG0:
+ */
+#define TX_SW_CFG0			0x1330
+
+/*
+ * TX_SW_CFG1:
+ */
+#define TX_SW_CFG1			0x1334
+
+/*
+ * TX_SW_CFG2:
+ */
+#define TX_SW_CFG2			0x1338
+
+/*
+ * TXOP_THRES_CFG:
+ */
+#define TXOP_THRES_CFG			0x133c
+
+/*
+ * TXOP_CTRL_CFG:
+ */
+#define TXOP_CTRL_CFG			0x1340
+
+/*
+ * TX_RTS_CFG:
+ * RTS_THRES: unit:byte
+ * RTS_FBK_EN: enable rts rate fallback
+ */
+#define TX_RTS_CFG			0x1344
+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
+#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
+
+/*
+ * TX_TIMEOUT_CFG:
+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
+ *                it is recommended that:
+ *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
+ */
+#define TX_TIMEOUT_CFG			0x1348
+#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
+
+/*
+ * TX_RTY_CFG:
+ * SHORT_RTY_LIMIT: short retry limit
+ * LONG_RTY_LIMIT: long retry limit
+ * LONG_RTY_THRE: Long retry threshoold
+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
+ *                   0:expired by retry limit, 1: expired by mpdu life timer
+ * AGG_RTY_MODE: Aggregate MPDU retry mode
+ *               0:expired by retry limit, 1: expired by mpdu life timer
+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
+ */
+#define TX_RTY_CFG			0x134c
+#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
+#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
+#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
+#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
+
+/*
+ * TX_LINK_CFG:
+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
+ * MFB_ENABLE: TX apply remote MFB 1:enable
+ * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
+ *                     0: not apply remote remote unsolicit (MFS=7)
+ * TX_MRQ_EN: MCS request TX enable
+ * TX_RDG_EN: RDG TX enable
+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
+ * REMOTE_MFB: remote MCS feedback
+ * REMOTE_MFS: remote MCS feedback sequence number
+ */
+#define TX_LINK_CFG			0x1350
+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
+#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
+#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
+#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
+#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
+#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
+#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
+
+/*
+ * HT_FBK_CFG0:
+ */
+#define HT_FBK_CFG0			0x1354
+#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * HT_FBK_CFG1:
+ */
+#define HT_FBK_CFG1			0x1358
+#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG0:
+ */
+#define LG_FBK_CFG0			0x135c
+#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
+#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
+#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
+#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
+#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG1:
+ */
+#define LG_FBK_CFG1			0x1360
+#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
+
+/*
+ * CCK_PROT_CFG: CCK Protection
+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
+ * PROTECT_CTRL: Protection control frame type for CCK TX
+ *               0:none, 1:RTS/CTS, 2:CTS-to-self
+ * PROTECT_NAV: TXOP protection type for CCK TX
+ *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
+ * RTS_TH_EN: RTS threshold enable on CCK TX
+ */
+#define CCK_PROT_CFG			0x1364
+#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * OFDM_PROT_CFG: OFDM Protection
+ */
+#define OFDM_PROT_CFG			0x1368
+#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM20_PROT_CFG: MM20 Protection
+ */
+#define MM20_PROT_CFG			0x136c
+#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM40_PROT_CFG: MM40 Protection
+ */
+#define MM40_PROT_CFG			0x1370
+#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF20_PROT_CFG: GF20 Protection
+ */
+#define GF20_PROT_CFG			0x1374
+#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF40_PROT_CFG: GF40 Protection
+ */
+#define GF40_PROT_CFG			0x1378
+#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * EXP_CTS_TIME:
+ */
+#define EXP_CTS_TIME			0x137c
+
+/*
+ * EXP_ACK_TIME:
+ */
+#define EXP_ACK_TIME			0x1380
+
+/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+#define RX_FILTER_CFG			0x1400
+#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
+#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
+#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
+#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
+#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
+#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
+#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
+#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
+#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
+#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
+#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
+#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
+#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
+#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
+#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
+#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
+
+/*
+ * AUTO_RSP_CFG:
+ * AUTORESPONDER: 0: disable, 1: enable
+ * BAC_ACK_POLICY: 0:long, 1:short preamble
+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
+ * DUAL_CTS_EN: Power bit value in control frame
+ * ACK_CTS_PSM_BIT:Power bit value in control frame
+ */
+#define AUTO_RSP_CFG			0x1404
+#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
+#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
+#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
+#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
+#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
+#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
+
+/*
+ * LEGACY_BASIC_RATE:
+ */
+#define LEGACY_BASIC_RATE		0x1408
+
+/*
+ * HT_BASIC_RATE:
+ */
+#define HT_BASIC_RATE			0x140c
+
+/*
+ * HT_CTRL_CFG:
+ */
+#define HT_CTRL_CFG			0x1410
+
+/*
+ * SIFS_COST_CFG:
+ */
+#define SIFS_COST_CFG			0x1414
+
+/*
+ * RX_PARSER_CFG:
+ * Set NAV for all received frames
+ */
+#define RX_PARSER_CFG			0x1418
+
+/*
+ * TX_SEC_CNT0:
+ */
+#define TX_SEC_CNT0			0x1500
+
+/*
+ * RX_SEC_CNT0:
+ */
+#define RX_SEC_CNT0			0x1504
+
+/*
+ * CCMP_FC_MUTE:
+ */
+#define CCMP_FC_MUTE			0x1508
+
+/*
+ * TXOP_HLDR_ADDR0:
+ */
+#define TXOP_HLDR_ADDR0			0x1600
+
+/*
+ * TXOP_HLDR_ADDR1:
+ */
+#define TXOP_HLDR_ADDR1			0x1604
+
+/*
+ * TXOP_HLDR_ET:
+ */
+#define TXOP_HLDR_ET			0x1608
+
+/*
+ * QOS_CFPOLL_RA_DW0:
+ */
+#define QOS_CFPOLL_RA_DW0		0x160c
+
+/*
+ * QOS_CFPOLL_RA_DW1:
+ */
+#define QOS_CFPOLL_RA_DW1		0x1610
+
+/*
+ * QOS_CFPOLL_QC:
+ */
+#define QOS_CFPOLL_QC			0x1614
+
+/*
+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
+ */
+#define RX_STA_CNT0			0x1700
+#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
+#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
+ */
+#define RX_STA_CNT1			0x1704
+#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
+#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT2:
+ */
+#define RX_STA_CNT2			0x1708
+#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
+#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT0: TX Beacon count
+ */
+#define TX_STA_CNT0			0x170c
+#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT1: TX tx count
+ */
+#define TX_STA_CNT1			0x1710
+#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
+#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT2: TX tx count
+ */
+#define TX_STA_CNT2			0x1714
+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_FIFO: TX Result for specific PID status fifo register
+ */
+#define TX_STA_FIFO			0x1718
+#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
+#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
+#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
+#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
+#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
+#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
+#define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
+#define TX_STA_FIFO_MCS			FIELD32(0x007f0000)
+#define TX_STA_FIFO_PHYMODE		FIELD32(0xc0000000)
+
+/*
+ * TX_AGG_CNT: Debug counter
+ */
+#define TX_AGG_CNT			0x171c
+#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT0:
+ */
+#define TX_AGG_CNT0			0x1720
+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT1:
+ */
+#define TX_AGG_CNT1			0x1724
+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT2:
+ */
+#define TX_AGG_CNT2			0x1728
+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT3:
+ */
+#define TX_AGG_CNT3			0x172c
+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT4:
+ */
+#define TX_AGG_CNT4			0x1730
+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT5:
+ */
+#define TX_AGG_CNT5			0x1734
+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT6:
+ */
+#define TX_AGG_CNT6			0x1738
+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT7:
+ */
+#define TX_AGG_CNT7			0x173c
+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
+
+/*
+ * MPDU_DENSITY_CNT:
+ * TX_ZERO_DEL: TX zero length delimiter count
+ * RX_ZERO_DEL: RX zero length delimiter count
+ */
+#define MPDU_DENSITY_CNT		0x1740
+#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
+#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
+
+/*
+ * Security key table memory.
+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
+ * SHARED_KEY_TABLE_BASE: 32-byte * 16-entry
+ * SHARED_KEY_MODE_BASE: 4-byte * 16-entry
+ */
+#define MAC_WCID_BASE			0x1800
+#define PAIRWISE_KEY_TABLE_BASE		0x4000
+#define MAC_IVEIV_TABLE_BASE		0x6000
+#define MAC_WCID_ATTRIBUTE_BASE		0x6800
+#define SHARED_KEY_TABLE_BASE		0x6c00
+#define SHARED_KEY_MODE_BASE		0x7000
+
+#define MAC_WCID_ENTRY(__idx) \
+	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define MAC_IVEIV_ENTRY(__idx) \
+	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+#define MAC_WCID_ATTR_ENTRY(__idx) \
+	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define SHARED_KEY_MODE_ENTRY(__idx) \
+	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+
+struct mac_wcid_entry {
+	u8 mac[6];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct hw_key_entry {
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct mac_iveiv_entry {
+	u8 iv[8];
+} __attribute__ ((packed));
+
+/*
+ * MAC_WCID_ATTRIBUTE:
+ */
+#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
+#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
+#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+
+/*
+ * SHARED_KEY_MODE:
+ */
+#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
+#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
+#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
+#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
+#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
+#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
+#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
+#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
+
+/*
+ * HOST-MCU communication
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR			0x7010
+#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID			0x7014
+#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
+ */
+#define H2M_MAILBOX_STATUS		0x701c
+
+/*
+ * H2M_INT_SRC:
+ */
+#define H2M_INT_SRC			0x7024
+
+/*
+ * H2M_BBP_AGENT:
+ */
+#define H2M_BBP_AGENT			0x7028
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
+#define MCU_LEDCS_POLARITY		FIELD8(0x01)
+
+/*
+ * HW_CS_CTS_BASE:
+ * Carrier-sense CTS frame base address.
+ * It's where mac stores carrier-sense frame for carrier-sense function.
+ */
+#define HW_CS_CTS_BASE			0x7700
+
+/*
+ * HW_DFS_CTS_BASE:
+ * DFS CTS frame base address. It's where mac stores CTS frame for DFS.
+ */
+#define HW_DFS_CTS_BASE			0x7780
+
+/*
+ * TXRX control registers - base address 0x3000
+ */
+
+/*
+ * TXRX_CSR1:
+ * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+ */
+#define TXRX_CSR1			0x77d0
+
+/*
+ * HW_DEBUG_SETTING_BASE:
+ * since NULL frame won't be that long (256 byte)
+ * We steal 16 tail bytes to save debugging settings
+ */
+#define HW_DEBUG_SETTING_BASE		0x77f0
+#define HW_DEBUG_SETTING_BASE2		0x7770
+
+/*
+ * HW_BEACON_BASE
+ * In order to support maximum 8 MBSS and its maximum length
+ * is 512 bytes for each beacon
+ * Three section discontinue memory segments will be used.
+ * 1. The original region for BCN 0~3
+ * 2. Extract memory from FCE table for BCN 4~5
+ * 3. Extract memory from Pair-wise key table for BCN 6~7
+ *    It occupied those memory of wcid 238~253 for BCN 6
+ *    and wcid 222~237 for BCN 7
+ *
+ * IMPORTANT NOTE: Not sure why legacy driver does this,
+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
+ */
+#define HW_BEACON_BASE0			0x7800
+#define HW_BEACON_BASE1			0x7a00
+#define HW_BEACON_BASE2			0x7c00
+#define HW_BEACON_BASE3			0x7e00
+#define HW_BEACON_BASE4			0x7200
+#define HW_BEACON_BASE5			0x7400
+#define HW_BEACON_BASE6			0x5dc0
+#define HW_BEACON_BASE7			0x5bc0
+
+#define HW_BEACON_OFFSET(__index) \
+	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
+	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
+	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+
+/*
+ * BBP registers.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP 1: TX Antenna
+ */
+#define BBP1_TX_POWER			FIELD8(0x07)
+#define BBP1_TX_ANTENNA			FIELD8(0x18)
+
+/*
+ * BBP 3: RX Antenna
+ */
+#define BBP3_RX_ANTENNA			FIELD8(0x18)
+#define BBP3_HT40_PLUS			FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF			FIELD8(0x01)
+#define BBP4_BANDWIDTH			FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R			FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING		FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER		FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
+
+/*
+ * RF registers
+ */
+
+/*
+ * RF 2
+ */
+#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
+#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
+#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
+
+/*
+ * RF 3
+ */
+#define RF3_TXPOWER_G			FIELD32(0x00003e00)
+#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
+#define RF3_TXPOWER_A			FIELD32(0x00003c00)
+
+/*
+ * RF 4
+ */
+#define RF4_TXPOWER_G			FIELD32(0x000007c0)
+#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
+#define RF4_TXPOWER_A			FIELD32(0x00000780)
+#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
+#define RF4_HT40			FIELD32(0x00200000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * EEPROM Version
+ */
+#define EEPROM_VERSION			0x0001
+#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
+#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0		0x0002
+#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_1		0x0003
+#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2		0x0004
+#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
+
+/*
+ * EEPROM ANTENNA config
+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
+ * TXPATH: 1: 1T, 2: 2T
+ */
+#define	EEPROM_ANTENNA			0x001a
+#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
+#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
+#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC config
+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ */
+#define	EEPROM_NIC			0x001b
+#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
+#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
+#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
+#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
+#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
+#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
+#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
+#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
+#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
+#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
+
+/*
+ * EEPROM frequency
+ */
+#define	EEPROM_FREQ			0x001d
+#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
+#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
+#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
+
+/*
+ * EEPROM LED
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED1			0x001e
+#define EEPROM_LED2			0x001f
+#define EEPROM_LED3			0x0020
+#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
+
+/*
+ * EEPROM LNA
+ */
+#define EEPROM_LNA			0x0022
+#define EEPROM_LNA_BG			FIELD16(0x00ff)
+#define EEPROM_LNA_A0			FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG offset
+ */
+#define EEPROM_RSSI_BG			0x0023
+#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG2 offset
+ */
+#define EEPROM_RSSI_BG2			0x0024
+#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A offset
+ */
+#define EEPROM_RSSI_A			0x0025
+#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A2 offset
+ */
+#define EEPROM_RSSI_A2			0x0026
+#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
+ *	This is delta in 40MHZ.
+ * VALUE: Tx Power dalta value (MAX=4)
+ * TYPE: 1: Plus the delta value, 0: minus the delta value
+ * TXPOWER: Enable:
+ */
+#define EEPROM_TXPOWER_DELTA		0x0028
+#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
+
+/*
+ * EEPROM TXPOWER 802.11BG
+ */
+#define	EEPROM_TXPOWER_BG1		0x0029
+#define	EEPROM_TXPOWER_BG2		0x0030
+#define EEPROM_TXPOWER_BG_SIZE		7
+#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A1		0x003c
+#define EEPROM_TXPOWER_A2		0x0053
+#define EEPROM_TXPOWER_A_SIZE		6
+#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower byrate: 20MHZ power
+ */
+#define EEPROM_TXPOWER_BYRATE		0x006f
+
+/*
+ * EEPROM BBP.
+ */
+#define	EEPROM_BBP_START		0x0078
+#define EEPROM_BBP_SIZE			16
+#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP			0x30
+#define MCU_WAKEUP			0x31
+#define MCU_RADIO_OFF			0x35
+#define MCU_CURRENT			0x36
+#define MCU_LED				0x50
+#define MCU_LED_STRENGTH		0x51
+#define MCU_LED_1			0x52
+#define MCU_LED_2			0x53
+#define MCU_LED_3			0x54
+#define MCU_RADAR			0x60
+#define MCU_BOOT_SIGNAL			0x72
+#define MCU_BBP_SIGNAL			0x80
+#define MCU_POWER_SAVE			0x83
+
+/*
+ * MCU mailbox tokens
+ */
+#define TOKEN_WAKUP			3
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+
+/*
+ * TX WI structure
+ */
+
+/*
+ * Word0
+ * FRAG: 1 To inform TKIP engine this is a fragment.
+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
+ * BW: Channel bandwidth 20MHz or 40 MHz
+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ */
+#define TXWI_W0_FRAG			FIELD32(0x00000001)
+#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
+#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
+#define TXWI_W0_TS			FIELD32(0x00000008)
+#define TXWI_W0_AMPDU			FIELD32(0x00000010)
+#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
+#define TXWI_W0_TX_OP			FIELD32(0x00000300)
+#define TXWI_W0_MCS			FIELD32(0x007f0000)
+#define TXWI_W0_BW			FIELD32(0x00800000)
+#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
+#define TXWI_W0_STBC			FIELD32(0x06000000)
+#define TXWI_W0_IFS			FIELD32(0x08000000)
+#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word1
+ */
+#define TXWI_W1_ACK			FIELD32(0x00000001)
+#define TXWI_W1_NSEQ			FIELD32(0x00000002)
+#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
+#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
+
+/*
+ * Word2
+ */
+#define TXWI_W2_IV			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ */
+#define TXWI_W3_EIV			FIELD32(0xffffffff)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
+/*
+ * Macros for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
+ */
+#define MIN_G_TXPOWER	0
+#define MIN_A_TXPOWER	-7
+#define MAX_G_TXPOWER	31
+#define MAX_A_TXPOWER	15
+#define DEFAULT_TXPOWER	5
+
+#define TXPOWER_G_FROM_DEV(__txpower) \
+	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_G_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
+
+#define TXPOWER_A_FROM_DEV(__txpower) \
+	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_A_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
new file mode 100644
index 0000000..eb1e1d0
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -0,0 +1,2284 @@
+/*
+	Copyright (C) 2009 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
+	Copyright (C) 2009 Gertjan van Wingerde <gwingerde@gmail.com>
+
+	Based on the original rt2800pci.c and rt2800usb.c.
+	  Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	  Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
+	  Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+	  Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
+	  Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+	  Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
+	  Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+	  <http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800lib
+	Abstract: rt2800 generic device routines.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "rt2x00.h"
+#ifdef CONFIG_RT2800USB
+#include "rt2x00usb.h"
+#endif
+#include "rt2800lib.h"
+#include "rt2800.h"
+#include "rt2800usb.h"
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("rt2800 library");
+MODULE_LICENSE("GPL");
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2800_register_read and rt2800_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ * The _lock versions must be used if you already hold the csr_mutex
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+	rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+	rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			    H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev,
+			     const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
+		if (rt2x00_intf_is_pci(rt2x00dev))
+			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_bbp_read(struct rt2x00_dev *rt2x00dev,
+			    const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+		if (rt2x00_intf_is_pci(rt2x00dev))
+			rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+		rt2800_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+			      const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
+
+		WAIT_FOR_RFCSR(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev,
+			    const unsigned int word, const u32 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
+
+		rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
+		rt2x00_rf_write(rt2x00dev, word, value);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+			const u8 command, const u8 token,
+			const u8 arg0, const u8 arg1)
+{
+	u32 reg;
+
+	/*
+	 * RT2880 and RT3052 don't support MCU requests.
+	 */
+	if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+	    rt2x00_rt(&rt2x00dev->chip, RT3052))
+		return;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the MCU becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
+		rt2800_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+		reg = 0;
+		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
+		rt2800_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+EXPORT_SYMBOL_GPL(rt2800_mcu_request);
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+const struct rt2x00debug rt2800_rt2x00debug = {
+	.owner	= THIS_MODULE,
+	.csr	= {
+		.read		= rt2800_register_read,
+		.write		= rt2800_register_write,
+		.flags		= RT2X00DEBUGFS_OFFSET,
+		.word_base	= CSR_REG_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= CSR_REG_SIZE / sizeof(u32),
+	},
+	.eeprom	= {
+		.read		= rt2x00_eeprom_read,
+		.write		= rt2x00_eeprom_write,
+		.word_base	= EEPROM_BASE,
+		.word_size	= sizeof(u16),
+		.word_count	= EEPROM_SIZE / sizeof(u16),
+	},
+	.bbp	= {
+		.read		= rt2800_bbp_read,
+		.write		= rt2800_bbp_write,
+		.word_base	= BBP_BASE,
+		.word_size	= sizeof(u8),
+		.word_count	= BBP_SIZE / sizeof(u8),
+	},
+	.rf	= {
+		.read		= rt2x00_rf_read,
+		.write		= rt2800_rf_write,
+		.word_base	= RF_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= RF_SIZE / sizeof(u32),
+	},
+};
+EXPORT_SYMBOL_GPL(rt2800_rt2x00debug);
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+EXPORT_SYMBOL_GPL(rt2800_rfkill_poll);
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800_brightness_set(struct led_classdev *led_cdev,
+				  enum led_brightness brightness)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	unsigned int enabled = brightness != LED_OFF;
+	unsigned int bg_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	unsigned int polarity =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_POLARITY);
+	unsigned int ledmode =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_MODE);
+
+	if (led->type == LED_TYPE_RADIO) {
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? 0x20 : 0);
+	} else if (led->type == LED_TYPE_ASSOC) {
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+	} else if (led->type == LED_TYPE_QUALITY) {
+		/*
+		 * The brightness is divided into 6 levels (0 - 5),
+		 * The specs tell us the following levels:
+		 *	0, 1 ,3, 7, 15, 31
+		 * to determine the level in a simple way we can simply
+		 * work with bitshifting:
+		 *	(1 << level) - 1
+		 */
+		rt2800_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+				      (1 << brightness / (LED_FULL / 6)) - 1,
+				      polarity);
+	}
+}
+
+static int rt2800_blink_set(struct led_classdev *led_cdev,
+			    unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	u32 reg;
+
+	rt2800_register_read(led->rt2x00dev, LED_CFG, &reg);
+	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+	rt2800_register_write(led->rt2x00dev, LED_CFG, reg);
+
+	return 0;
+}
+
+void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+		     struct rt2x00_led *led, enum led_type type)
+{
+	led->rt2x00dev = rt2x00dev;
+	led->type = type;
+	led->led_dev.brightness_set = rt2800_brightness_set;
+	led->led_dev.blink_set = rt2800_blink_set;
+	led->flags = LED_INITIALIZED;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_led);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+				    struct rt2x00lib_crypto *crypto,
+				    struct ieee80211_key_conf *key)
+{
+	struct mac_wcid_entry wcid_entry;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+	u32 reg;
+
+	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+			   (crypto->cmd == SET_KEY) * crypto->bssidx);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+	if ((crypto->cipher == CIPHER_TKIP) ||
+	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+	    (crypto->cipher == CIPHER_AES))
+		iveiv_entry.iv[3] |= 0x20;
+	iveiv_entry.iv[3] |= key->keyidx << 6;
+	rt2800_register_multiwrite(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+	memset(&wcid_entry, 0, sizeof(wcid_entry));
+	if (crypto->cmd == SET_KEY)
+		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+	rt2800_register_multiwrite(rt2x00dev, offset,
+				      &wcid_entry, sizeof(wcid_entry));
+}
+
+int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_crypto *crypto,
+			     struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	u32 offset;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+		rt2800_register_multiwrite(rt2x00dev, offset,
+					      &key_entry, sizeof(key_entry));
+	}
+
+	/*
+	 * The cipher types are stored over multiple registers
+	 * starting with SHARED_KEY_MODE_BASE each word will have
+	 * 32 bits and contains the cipher types for 2 bssidx each.
+	 * Using the correct defines correctly will cause overhead,
+	 * so just calculate the correct offset.
+	 */
+	field.bit_offset = 4 * (key->hw_key_idx % 8);
+	field.bit_mask = 0x7 << field.bit_offset;
+
+	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_config_shared_key);
+
+int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00lib_crypto *crypto,
+			       struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	u32 offset;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * 1 pairwise key is possible per AID, this means that the AID
+		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
+		 * last possible shared key entry.
+		 */
+		if (crypto->aid > (256 - 32))
+			return -ENOSPC;
+
+		key->hw_key_idx = 32 + crypto->aid;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		rt2800_register_multiwrite(rt2x00dev, offset,
+					      &key_entry, sizeof(key_entry));
+	}
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_config_pairwise_key);
+
+void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
+			  const unsigned int filter_flags)
+{
+	u32 reg;
+
+	/*
+	 * Start configuration steps.
+	 * Note that the version error will always be dropped
+	 * and broadcast frames will always be accepted since
+	 * there is no filter for it at this time.
+	 */
+	rt2800_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+			   !(filter_flags & FIF_FCSFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+			   !(filter_flags & FIF_PLCPFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+			   !(filter_flags & FIF_PROMISC_IN_BSS));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+			   !(filter_flags & FIF_ALLMULTI));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+			   !(filter_flags & FIF_PSPOLL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_filter);
+
+void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
+			struct rt2x00intf_conf *conf, const unsigned int flags)
+{
+	unsigned int beacon_base;
+	u32 reg;
+
+	if (flags & CONFIG_UPDATE_TYPE) {
+		/*
+		 * Clear current synchronisation setup.
+		 * For the Beacon base registers we only need to clear
+		 * the first byte since that byte contains the VALID and OWNER
+		 * bits which (when set to 0) will invalidate the entire beacon.
+		 */
+		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+		rt2800_register_write(rt2x00dev, beacon_base, 0);
+
+		/*
+		 * Enable synchronisation.
+		 */
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE,
+				   (conf->sync == TSF_SYNC_BEACON));
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+
+	if (flags & CONFIG_UPDATE_MAC) {
+		reg = le32_to_cpu(conf->mac[1]);
+		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+		conf->mac[1] = cpu_to_le32(reg);
+
+		rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+					      conf->mac, sizeof(conf->mac));
+	}
+
+	if (flags & CONFIG_UPDATE_BSSID) {
+		reg = le32_to_cpu(conf->bssid[1]);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+		conf->bssid[1] = cpu_to_le32(reg);
+
+		rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+					      conf->bssid, sizeof(conf->bssid));
+	}
+}
+EXPORT_SYMBOL_GPL(rt2800_config_intf);
+
+void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
+	rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+			   !!erp->short_preamble);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+			   !!erp->short_preamble);
+	rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+			   erp->cts_protection ? 2 : 0);
+	rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+				 erp->basic_rates);
+	rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2800_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+	rt2800_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+	rt2800_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_erp);
+
+void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant)
+{
+	u8 r1;
+	u8 r3;
+
+	rt2800_bbp_read(rt2x00dev, 1, &r1);
+	rt2800_bbp_read(rt2x00dev, 3, &r3);
+
+	/*
+	 * Configure the TX antenna.
+	 */
+	switch ((int)ant->tx) {
+	case 1:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+		if (rt2x00_intf_is_pci(rt2x00dev))
+			rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+		break;
+	case 3:
+		/* Do nothing */
+		break;
+	}
+
+	/*
+	 * Configure the RX antenna.
+	 */
+	switch ((int)ant->rx) {
+	case 1:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+		break;
+	case 3:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+		break;
+	}
+
+	rt2800_bbp_write(rt2x00dev, 3, r3);
+	rt2800_bbp_write(rt2x00dev, 1, r1);
+}
+EXPORT_SYMBOL_GPL(rt2800_config_ant);
+
+static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				   struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain;
+
+	if (libconf->rf.channel <= 14) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+	} else if (libconf->rf.channel <= 64) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+	} else if (libconf->rf.channel <= 128) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+				       struct ieee80211_conf *conf,
+				       struct rf_channel *rf,
+				       struct channel_info *info)
+{
+	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+	if (rt2x00dev->default_ant.tx == 1)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+	if (rt2x00dev->default_ant.rx == 1) {
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+	} else if (rt2x00dev->default_ant.rx == 2)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+	if (rf->channel > 14) {
+		/*
+		 * When TX power is below 0, we should increase it by 7 to
+		 * make it a positive value (Minumum value is -7).
+		 * However this means that values between 0 and 7 have
+		 * double meaning, and we should set a 7DBm boost flag.
+		 */
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power1 >= 0));
+
+		if (info->tx_power1 < 0)
+			info->tx_power1 += 7;
+
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power1));
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power2 >= 0));
+
+		if (info->tx_power2 < 0)
+			info->tx_power2 += 7;
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power2));
+	} else {
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power1));
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power2));
+	}
+
+	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+	rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+	rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+				       struct ieee80211_conf *conf,
+				       struct rf_channel *rf,
+				       struct channel_info *info)
+{
+	u8 rfcsr;
+
+	rt2800_rfcsr_write(rt2x00dev, 2, rf->rf1);
+	rt2800_rfcsr_write(rt2x00dev, 3, rf->rf3);
+
+	rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+	rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+			  TXPOWER_G_TO_DEV(info->tx_power1));
+	rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+	rt2800_rfcsr_write(rt2x00dev, 24,
+			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+	rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
+				  struct ieee80211_conf *conf,
+				  struct rf_channel *rf,
+				  struct channel_info *info)
+{
+	u32 reg;
+	unsigned int tx_pin;
+	u8 bbp;
+
+	if ((rt2x00_rt(&rt2x00dev->chip, RT3070) ||
+	     rt2x00_rt(&rt2x00dev->chip, RT3090)) &&
+	    (rt2x00_rf(&rt2x00dev->chip, RF2020) ||
+	     rt2x00_rf(&rt2x00dev->chip, RF3020) ||
+	     rt2x00_rf(&rt2x00dev->chip, RF3021) ||
+	     rt2x00_rf(&rt2x00dev->chip, RF3022)))
+		rt2800_config_channel_rt3x(rt2x00dev, conf, rf, info);
+	else
+		rt2800_config_channel_rt2x(rt2x00dev, conf, rf, info);
+
+	/*
+	 * Change BBP settings
+	 */
+	rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+	rt2800_bbp_write(rt2x00dev, 86, 0);
+
+	if (rf->channel <= 14) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+			rt2800_bbp_write(rt2x00dev, 82, 0x62);
+			rt2800_bbp_write(rt2x00dev, 75, 0x46);
+		} else {
+			rt2800_bbp_write(rt2x00dev, 82, 0x84);
+			rt2800_bbp_write(rt2x00dev, 75, 0x50);
+		}
+	} else {
+		rt2800_bbp_write(rt2x00dev, 82, 0xf2);
+
+		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+			rt2800_bbp_write(rt2x00dev, 75, 0x46);
+		else
+			rt2800_bbp_write(rt2x00dev, 75, 0x50);
+	}
+
+	rt2800_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+	rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+	tx_pin = 0;
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.tx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+	}
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.rx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+	}
+
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800_bbp_read(rt2x00dev, 3, &bbp);
+	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2800_bbp_write(rt2x00dev, 3, bbp);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		if (conf_is_ht40(conf)) {
+			rt2800_bbp_write(rt2x00dev, 69, 0x1a);
+			rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+			rt2800_bbp_write(rt2x00dev, 73, 0x16);
+		} else {
+			rt2800_bbp_write(rt2x00dev, 69, 0x16);
+			rt2800_bbp_write(rt2x00dev, 70, 0x08);
+			rt2800_bbp_write(rt2x00dev, 73, 0x11);
+		}
+	}
+
+	msleep(1);
+}
+
+static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
+				  const int txpower)
+{
+	u32 reg;
+	u32 value = TXPOWER_G_TO_DEV(txpower);
+	u8 r1;
+
+	rt2800_bbp_read(rt2x00dev, 1, &r1);
+	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2800_bbp_write(rt2x00dev, 1, r1);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+	rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+	rt2800_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+				      struct rt2x00lib_conf *libconf)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+			   libconf->conf->short_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+			   libconf->conf->long_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+	rt2800_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800_config_ps(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_conf *libconf)
+{
+	enum dev_state state =
+	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
+		STATE_SLEEP : STATE_AWAKE;
+	u32 reg;
+
+	if (state == STATE_SLEEP) {
+		rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+		rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+				   libconf->conf->listen_interval - 1);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+		rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+	} else {
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+		rt2800_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+		rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+	}
+}
+
+void rt2800_config(struct rt2x00_dev *rt2x00dev,
+		   struct rt2x00lib_conf *libconf,
+		   const unsigned int flags)
+{
+	/* Always recalculate LNA gain before changing configuration */
+	rt2800_config_lna_gain(rt2x00dev, libconf);
+
+	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+		rt2800_config_channel(rt2x00dev, libconf->conf,
+				      &libconf->rf, &libconf->channel);
+	if (flags & IEEE80211_CONF_CHANGE_POWER)
+		rt2800_config_txpower(rt2x00dev, libconf->conf->power_level);
+	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+		rt2800_config_retry_limit(rt2x00dev, libconf);
+	if (flags & IEEE80211_CONF_CHANGE_PS)
+		rt2800_config_ps(rt2x00dev, libconf);
+}
+EXPORT_SYMBOL_GPL(rt2800_config);
+
+/*
+ * Link tuning
+ */
+void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
+{
+	u32 reg;
+
+	/*
+	 * Update FCS error count from register.
+	 */
+	rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+EXPORT_SYMBOL_GPL(rt2800_link_stats);
+
+static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
+		if (rt2x00_intf_is_usb(rt2x00dev) &&
+		    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
+			return 0x1c + (2 * rt2x00dev->lna_gain);
+		else
+			return 0x2e + rt2x00dev->lna_gain;
+	}
+
+	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+	else
+		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
+				  struct link_qual *qual, u8 vgc_level)
+{
+	if (qual->vgc_level != vgc_level) {
+		rt2800_bbp_write(rt2x00dev, 66, vgc_level);
+		qual->vgc_level = vgc_level;
+		qual->vgc_level_reg = vgc_level;
+	}
+}
+
+void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual)
+{
+	rt2800_set_vgc(rt2x00dev, qual, rt2800_get_default_vgc(rt2x00dev));
+}
+EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
+
+void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
+		       const u32 count)
+{
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+		return;
+
+	/*
+	 * When RSSI is better then -80 increase VGC level with 0x10
+	 */
+	rt2800_set_vgc(rt2x00dev, qual,
+		       rt2800_get_default_vgc(rt2x00dev) +
+		       ((qual->rssi > -80) * 0x10));
+}
+EXPORT_SYMBOL_GPL(rt2800_link_tuner);
+
+/*
+ * Initialization functions.
+ */
+int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	unsigned int i;
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		/*
+		 * Wait until BBP and RF are ready.
+		 */
+		for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+			rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+			if (reg && reg != ~0)
+				break;
+			msleep(1);
+		}
+
+		if (i == REGISTER_BUSY_COUNT) {
+			ERROR(rt2x00dev, "Unstable hardware.\n");
+			return -EBUSY;
+		}
+
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		rt2800_register_write(rt2x00dev, PBF_SYS_CTRL,
+				      reg & ~0x00002000);
+	} else if (rt2x00_intf_is_pci(rt2x00dev))
+		rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+#ifdef CONFIG_RT2800USB
+		rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+					    USB_MODE_RESET, REGISTER_TIMEOUT);
+#endif
+	}
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2800_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
+	rt2800_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
+	rt2800_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
+	rt2800_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
+	rt2800_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+	rt2800_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+	} else {
+		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+	}
+
+	rt2800_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
+	rt2800_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
+	rt2800_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
+	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
+	else
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+	rt2800_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
+	rt2800_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
+	rt2800_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+		rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
+		rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	}
+
+	rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+	rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
+	rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+			   IEEE80211_MAX_RTS_THRESHOLD);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
+	rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	/*
+	 * ASIC will keep garbage value after boot, clear encryption keys.
+	 */
+	for (i = 0; i < 4; i++)
+		rt2800_register_write(rt2x00dev,
+					 SHARED_KEY_MODE_ENTRY(i), 0);
+
+	for (i = 0; i < 256; i++) {
+		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+		rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+					      wcid, sizeof(wcid));
+
+		rt2800_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+		rt2800_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
+	}
+
+	/*
+	 * Clear all beacons
+	 * For the Beacon base registers we only need to clear
+	 * the first byte since that byte contains the VALID and OWNER
+	 * bits which (when set to 0) will invalidate the entire beacon.
+	 */
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
+	rt2800_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_register_read(rt2x00dev, USB_CYC_CFG, &reg);
+		rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
+		rt2800_register_write(rt2x00dev, USB_CYC_CFG, reg);
+	}
+
+	rt2800_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
+	rt2800_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
+	rt2800_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
+	rt2800_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
+	rt2800_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
+	rt2800_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
+	rt2800_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
+	rt2800_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+	/*
+	 * We must clear the error counters.
+	 * These registers are cleared on read,
+	 * so we may pass a useless variable to store the value.
+	 */
+	rt2800_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	rt2800_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+	rt2800_register_read(rt2x00dev, RX_STA_CNT2, &reg);
+	rt2800_register_read(rt2x00dev, TX_STA_CNT0, &reg);
+	rt2800_register_read(rt2x00dev, TX_STA_CNT1, &reg);
+	rt2800_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_registers);
+
+static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+			return 0;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u8 value;
+
+	/*
+	 * BBP was enabled after firmware was loaded,
+	 * but we need to reactivate it now.
+	 */
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_bbp_read(rt2x00dev, 0, &value);
+		if ((value != 0xff) && (value != 0x00))
+			return 0;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+	return -EACCES;
+}
+
+int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u16 eeprom;
+	u8 reg_id;
+	u8 value;
+
+	if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
+		     rt2800_wait_bbp_ready(rt2x00dev)))
+		return -EACCES;
+
+	rt2800_bbp_write(rt2x00dev, 65, 0x2c);
+	rt2800_bbp_write(rt2x00dev, 66, 0x38);
+	rt2800_bbp_write(rt2x00dev, 69, 0x12);
+	rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+	rt2800_bbp_write(rt2x00dev, 73, 0x10);
+	rt2800_bbp_write(rt2x00dev, 81, 0x37);
+	rt2800_bbp_write(rt2x00dev, 82, 0x62);
+	rt2800_bbp_write(rt2x00dev, 83, 0x6a);
+	rt2800_bbp_write(rt2x00dev, 84, 0x99);
+	rt2800_bbp_write(rt2x00dev, 86, 0x00);
+	rt2800_bbp_write(rt2x00dev, 91, 0x04);
+	rt2800_bbp_write(rt2x00dev, 92, 0x00);
+	rt2800_bbp_write(rt2x00dev, 103, 0x00);
+	rt2800_bbp_write(rt2x00dev, 105, 0x05);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		rt2800_bbp_write(rt2x00dev, 69, 0x16);
+		rt2800_bbp_write(rt2x00dev, 73, 0x12);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+		rt2800_bbp_write(rt2x00dev, 84, 0x19);
+
+	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	    rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
+		rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+		rt2800_bbp_write(rt2x00dev, 84, 0x99);
+		rt2800_bbp_write(rt2x00dev, 105, 0x05);
+	}
+
+	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+		rt2800_bbp_write(rt2x00dev, 31, 0x08);
+		rt2800_bbp_write(rt2x00dev, 78, 0x0e);
+		rt2800_bbp_write(rt2x00dev, 80, 0x08);
+	}
+
+	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+		if (eeprom != 0xffff && eeprom != 0x0000) {
+			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+			rt2800_bbp_write(rt2x00dev, reg_id, value);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_bbp);
+
+static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+				bool bw40, u8 rfcsr24, u8 filter_target)
+{
+	unsigned int i;
+	u8 bbp;
+	u8 rfcsr;
+	u8 passband;
+	u8 stopband;
+	u8 overtuned = 0;
+
+	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+	rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set power & frequency of passband test tone
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0);
+
+	for (i = 0; i < 100; i++) {
+		rt2800_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800_bbp_read(rt2x00dev, 55, &passband);
+		if (passband)
+			break;
+	}
+
+	/*
+	 * Set power & frequency of stopband test tone
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0x06);
+
+	for (i = 0; i < 100; i++) {
+		rt2800_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800_bbp_read(rt2x00dev, 55, &stopband);
+
+		if ((passband - stopband) <= filter_target) {
+			rfcsr24++;
+			overtuned += ((passband - stopband) == filter_target);
+		} else
+			break;
+
+		rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	}
+
+	rfcsr24 -= !!overtuned;
+
+	rt2800_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	return rfcsr24;
+}
+
+int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfcsr;
+	u8 bbp;
+
+	if (rt2x00_intf_is_usb(rt2x00dev) &&
+	    rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		return 0;
+
+	if (rt2x00_intf_is_pci(rt2x00dev)) {
+		if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+		    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+		    !rt2x00_rf(&rt2x00dev->chip, RF3022))
+			return 0;
+	}
+
+	/*
+	 * Init RF calibration.
+	 */
+	rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
+		rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
+		rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 7, 0x70);
+		rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
+		rt2800_rfcsr_write(rt2x00dev, 10, 0x71);
+		rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
+		rt2800_rfcsr_write(rt2x00dev, 12, 0x7b);
+		rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
+		rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
+		rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
+		rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
+		rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
+		rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
+		rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
+		rt2800_rfcsr_write(rt2x00dev, 24, 0x16);
+		rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+		rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
+		rt2800_rfcsr_write(rt2x00dev, 29, 0x1f);
+	} else if (rt2x00_intf_is_pci(rt2x00dev)) {
+		rt2800_rfcsr_write(rt2x00dev, 0, 0x50);
+		rt2800_rfcsr_write(rt2x00dev, 1, 0x01);
+		rt2800_rfcsr_write(rt2x00dev, 2, 0xf7);
+		rt2800_rfcsr_write(rt2x00dev, 3, 0x75);
+		rt2800_rfcsr_write(rt2x00dev, 4, 0x40);
+		rt2800_rfcsr_write(rt2x00dev, 5, 0x03);
+		rt2800_rfcsr_write(rt2x00dev, 6, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 7, 0x50);
+		rt2800_rfcsr_write(rt2x00dev, 8, 0x39);
+		rt2800_rfcsr_write(rt2x00dev, 9, 0x0f);
+		rt2800_rfcsr_write(rt2x00dev, 10, 0x60);
+		rt2800_rfcsr_write(rt2x00dev, 11, 0x21);
+		rt2800_rfcsr_write(rt2x00dev, 12, 0x75);
+		rt2800_rfcsr_write(rt2x00dev, 13, 0x75);
+		rt2800_rfcsr_write(rt2x00dev, 14, 0x90);
+		rt2800_rfcsr_write(rt2x00dev, 15, 0x58);
+		rt2800_rfcsr_write(rt2x00dev, 16, 0xb3);
+		rt2800_rfcsr_write(rt2x00dev, 17, 0x92);
+		rt2800_rfcsr_write(rt2x00dev, 18, 0x2c);
+		rt2800_rfcsr_write(rt2x00dev, 19, 0x02);
+		rt2800_rfcsr_write(rt2x00dev, 20, 0xba);
+		rt2800_rfcsr_write(rt2x00dev, 21, 0xdb);
+		rt2800_rfcsr_write(rt2x00dev, 22, 0x00);
+		rt2800_rfcsr_write(rt2x00dev, 23, 0x31);
+		rt2800_rfcsr_write(rt2x00dev, 24, 0x08);
+		rt2800_rfcsr_write(rt2x00dev, 25, 0x01);
+		rt2800_rfcsr_write(rt2x00dev, 26, 0x25);
+		rt2800_rfcsr_write(rt2x00dev, 27, 0x23);
+		rt2800_rfcsr_write(rt2x00dev, 28, 0x13);
+		rt2800_rfcsr_write(rt2x00dev, 29, 0x83);
+	}
+
+	/*
+	 * Set RX Filter calibration for 20MHz and 40MHz
+	 */
+	rt2x00dev->calibration[0] =
+	    rt2800_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+	rt2x00dev->calibration[1] =
+	    rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * set BBP back to BW20
+	 */
+	rt2800_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800_bbp_write(rt2x00dev, 4, bbp);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_rfcsr);
+
+int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, EFUSE_CTRL, &reg);
+
+	return rt2x00_get_field32(reg, EFUSE_CTRL_PRESENT);
+}
+EXPORT_SYMBOL_GPL(rt2800_efuse_detect);
+
+static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	rt2800_register_read_lock(rt2x00dev, EFUSE_CTRL, &reg);
+	rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
+	rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
+	rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
+	rt2800_register_write_lock(rt2x00dev, EFUSE_CTRL, reg);
+
+	/* Wait until the EEPROM has been loaded */
+	rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
+
+	/* Apparently the data is read from end to start */
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3,
+					(u32 *)&rt2x00dev->eeprom[i]);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2,
+					(u32 *)&rt2x00dev->eeprom[i + 2]);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1,
+					(u32 *)&rt2x00dev->eeprom[i + 4]);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0,
+					(u32 *)&rt2x00dev->eeprom[i + 6]);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8)
+		rt2800_efuse_read(rt2x00dev, i);
+}
+EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
+
+int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u16 word;
+	u8 *mac;
+	u8 default_lna_gain;
+
+	/*
+	 * Start validation of the data that has been read.
+	 */
+	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+	if (!is_valid_ether_addr(mac)) {
+		random_ether_addr(mac);
+		EEPROM(rt2x00dev, "MAC: %pM\n", mac);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
+	} else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+		/*
+		 * There is a max of 2 RX streams for RT28x0 series
+		 */
+		if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
+			rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
+	if ((word & 0x00ff) == 0x00ff) {
+		rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
+				   LED_MODE_TXRX_ACTIVITY);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
+		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+	}
+
+	/*
+	 * During the LNA validation we are going to use
+	 * lna0 as correct value. Note that EEPROM_LNA
+	 * is never validated.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
+	default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
+
+int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 value;
+	u16 eeprom;
+
+	/*
+	 * Read EEPROM word for configuration.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Identify RF chipset.
+	 */
+	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
+
+	if (rt2x00_intf_is_usb(rt2x00dev)) {
+		struct rt2x00_chip *chip = &rt2x00dev->chip;
+
+		/*
+		 * The check for rt2860 is not a typo, some rt2870 hardware
+		 * identifies itself as rt2860 in the CSR register.
+		 */
+		if (rt2x00_check_rev(chip, 0xfff00000, 0x28600000) ||
+		    rt2x00_check_rev(chip, 0xfff00000, 0x28700000) ||
+		    rt2x00_check_rev(chip, 0xfff00000, 0x28800000)) {
+			rt2x00_set_chip_rt(rt2x00dev, RT2870);
+		} else if (rt2x00_check_rev(chip, 0xffff0000, 0x30700000)) {
+			rt2x00_set_chip_rt(rt2x00dev, RT3070);
+		} else {
+			ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+			return -ENODEV;
+		}
+	}
+	rt2x00_print_chip(rt2x00dev);
+
+	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Identify default antenna configuration.
+	 */
+	rt2x00dev->default_ant.tx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
+	rt2x00dev->default_ant.rx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
+
+	/*
+	 * Read frequency offset and RF programming sequence.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
+
+	/*
+	 * Read external LNA informations.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
+		__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+
+	/*
+	 * Detect if this device has an hardware controlled radio.
+	 */
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
+		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+
+	/*
+	 * Store led settings, for correct led behaviour.
+	 */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+	rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
+
+/*
+ * RF value list for rt28x0
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
+ */
+static const struct rf_channel rf_vals[] = {
+	{ 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
+	{ 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
+	{ 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
+	{ 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
+	{ 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
+	{ 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
+	{ 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
+	{ 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
+	{ 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
+	{ 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
+	{ 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
+	{ 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
+	{ 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
+	{ 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
+
+	/* 802.11 UNI / HyperLan 2 */
+	{ 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
+	{ 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
+	{ 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
+	{ 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
+	{ 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
+	{ 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
+	{ 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
+	{ 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
+	{ 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
+	{ 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
+	{ 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
+	{ 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
+
+	/* 802.11 HyperLan 2 */
+	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
+	{ 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
+	{ 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
+	{ 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
+	{ 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
+	{ 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
+	{ 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
+	{ 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
+	{ 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
+	{ 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
+
+	/* 802.11 UNII */
+	{ 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
+	{ 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
+	{ 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
+	{ 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
+	{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
+	{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
+	{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
+	{ 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
+	{ 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
+	{ 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
+	{ 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
+
+	/* 802.11 Japan */
+	{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
+	{ 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
+	{ 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
+	{ 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
+	{ 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
+	{ 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
+	{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+};
+
+/*
+ * RF value list for rt3070
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_302x[] = {
+	{1,  241, 2, 2 },
+	{2,  241, 2, 7 },
+	{3,  242, 2, 2 },
+	{4,  242, 2, 7 },
+	{5,  243, 2, 2 },
+	{6,  243, 2, 7 },
+	{7,  244, 2, 2 },
+	{8,  244, 2, 7 },
+	{9,  245, 2, 2 },
+	{10, 245, 2, 7 },
+	{11, 246, 2, 2 },
+	{12, 246, 2, 7 },
+	{13, 247, 2, 2 },
+	{14, 248, 2, 4 },
+};
+
+int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+	struct rt2x00_chip *chip = &rt2x00dev->chip;
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	struct channel_info *info;
+	char *tx_power1;
+	char *tx_power2;
+	unsigned int i;
+	u16 eeprom;
+
+	/*
+	 * Initialize all hw fields.
+	 */
+	rt2x00dev->hw->flags =
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM |
+	    IEEE80211_HW_SUPPORTS_PS |
+	    IEEE80211_HW_PS_NULLFUNC_STACK;
+
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+				rt2x00_eeprom_addr(rt2x00dev,
+						   EEPROM_MAC_ADDR_0));
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Initialize hw_mode information.
+	 */
+	spec->supported_bands = SUPPORT_BAND_2GHZ;
+	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+	if (rt2x00_rf(chip, RF2820) ||
+	    rt2x00_rf(chip, RF2720) ||
+	    (rt2x00_intf_is_pci(rt2x00dev) && rt2x00_rf(chip, RF3052))) {
+		spec->num_channels = 14;
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(chip, RF2850) || rt2x00_rf(chip, RF2750)) {
+		spec->supported_bands |= SUPPORT_BAND_5GHZ;
+		spec->num_channels = ARRAY_SIZE(rf_vals);
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(chip, RF3020) ||
+		   rt2x00_rf(chip, RF2020) ||
+		   rt2x00_rf(chip, RF3021) ||
+		   rt2x00_rf(chip, RF3022)) {
+		spec->num_channels = ARRAY_SIZE(rf_vals_302x);
+		spec->channels = rf_vals_302x;
+	}
+
+	/*
+	 * Initialize HT information.
+	 */
+	if (!rt2x00_rf(chip, RF2020))
+		spec->ht.ht_supported = true;
+	else
+		spec->ht.ht_supported = false;
+
+	spec->ht.cap =
+	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+	    IEEE80211_HT_CAP_GRN_FLD |
+	    IEEE80211_HT_CAP_SGI_20 |
+	    IEEE80211_HT_CAP_SGI_40 |
+	    IEEE80211_HT_CAP_TX_STBC |
+	    IEEE80211_HT_CAP_RX_STBC |
+	    IEEE80211_HT_CAP_PSMP_SUPPORT;
+	spec->ht.ampdu_factor = 3;
+	spec->ht.ampdu_density = 4;
+	spec->ht.mcs.tx_params =
+	    IEEE80211_HT_MCS_TX_DEFINED |
+	    IEEE80211_HT_MCS_TX_RX_DIFF |
+	    ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
+		IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+
+	switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
+	case 3:
+		spec->ht.mcs.rx_mask[2] = 0xff;
+	case 2:
+		spec->ht.mcs.rx_mask[1] = 0xff;
+	case 1:
+		spec->ht.mcs.rx_mask[0] = 0xff;
+		spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
+		break;
+	}
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
+	tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+
+	for (i = 0; i < 14; i++) {
+		info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
+		info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
+	}
+
+	if (spec->num_channels > 14) {
+		tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
+		tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
+
+		for (i = 14; i < spec->num_channels; i++) {
+			info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
+			info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
+				u32 *iv32, u16 *iv16)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+
+	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+	rt2800_register_multiread(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
+	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+}
+
+static int rt2800_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+	rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
+	rt2800_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2800_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	return 0;
+}
+
+static int rt2800_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			  const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+	u32 offset;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	/*
+	 * We only need to perform additional register initialization
+	 * for WMM queues/
+	 */
+	if (queue_idx >= 4)
+		return 0;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+	field.bit_offset = (queue_idx & 1) * 16;
+	field.bit_mask = 0xffff << field.bit_offset;
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field, queue->txop);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt2800_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt2800_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt2800_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt2800_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+	/* Update EDCA registers */
+	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
+	rt2800_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
+	rt2800_register_write(rt2x00dev, offset, reg);
+
+	return 0;
+}
+
+static u64 rt2800_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u64 tsf;
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
+	rt2800_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+	return tsf;
+}
+
+const struct ieee80211_ops rt2800_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_tim		= rt2x00mac_set_tim,
+	.set_key		= rt2x00mac_set_key,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800_get_tkip_seq,
+	.set_rts_threshold	= rt2800_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800_conf_tx,
+	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.get_tsf		= rt2800_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
+};
+EXPORT_SYMBOL_GPL(rt2800_mac80211_ops);
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
new file mode 100644
index 0000000..535ce22
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -0,0 +1,151 @@
+/*
+	Copyright (C) 2009 Bartlomiej Zolnierkiewicz
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef RT2800LIB_H
+#define RT2800LIB_H
+
+struct rt2800_ops {
+	void (*register_read)(struct rt2x00_dev *rt2x00dev,
+			      const unsigned int offset, u32 *value);
+	void (*register_read_lock)(struct rt2x00_dev *rt2x00dev,
+				   const unsigned int offset, u32 *value);
+	void (*register_write)(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int offset, u32 value);
+	void (*register_write_lock)(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int offset, u32 value);
+
+	void (*register_multiread)(struct rt2x00_dev *rt2x00dev,
+				   const unsigned int offset,
+				   void *value, const u32 length);
+	void (*register_multiwrite)(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int offset,
+				    const void *value, const u32 length);
+
+	int (*regbusy_read)(struct rt2x00_dev *rt2x00dev,
+			    const unsigned int offset,
+			    const struct rt2x00_field32 field, u32 *reg);
+};
+
+static inline void rt2800_register_read(struct rt2x00_dev *rt2x00dev,
+					const unsigned int offset,
+					u32 *value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_read(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_read_lock(struct rt2x00_dev *rt2x00dev,
+					     const unsigned int offset,
+					     u32 *value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_read_lock(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_write(struct rt2x00_dev *rt2x00dev,
+					 const unsigned int offset,
+					 u32 value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_write(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_write_lock(struct rt2x00_dev *rt2x00dev,
+					      const unsigned int offset,
+					      u32 value)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_write_lock(rt2x00dev, offset, value);
+}
+
+static inline void rt2800_register_multiread(struct rt2x00_dev *rt2x00dev,
+					     const unsigned int offset,
+					     void *value, const u32 length)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_multiread(rt2x00dev, offset, value, length);
+}
+
+static inline void rt2800_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+					      const unsigned int offset,
+					      const void *value,
+					      const u32 length)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	rt2800ops->register_multiwrite(rt2x00dev, offset, value, length);
+}
+
+static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
+				      const unsigned int offset,
+				      const struct rt2x00_field32 field,
+				      u32 *reg)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->priv;
+
+	return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
+}
+
+void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev,
+			const u8 command, const u8 token,
+			const u8 arg0, const u8 arg1);
+
+extern const struct rt2x00debug rt2800_rt2x00debug;
+
+int rt2800_rfkill_poll(struct rt2x00_dev *rt2x00dev);
+void rt2800_init_led(struct rt2x00_dev *rt2x00dev,
+		     struct rt2x00_led *led, enum led_type type);
+int rt2800_config_shared_key(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_crypto *crypto,
+			     struct ieee80211_key_conf *key);
+int rt2800_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00lib_crypto *crypto,
+			       struct ieee80211_key_conf *key);
+void rt2800_config_filter(struct rt2x00_dev *rt2x00dev,
+			  const unsigned int filter_flags);
+void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
+			struct rt2x00intf_conf *conf, const unsigned int flags);
+void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp);
+void rt2800_config_ant(struct rt2x00_dev *rt2x00dev, struct antenna_setup *ant);
+void rt2800_config(struct rt2x00_dev *rt2x00dev,
+		   struct rt2x00lib_conf *libconf,
+		   const unsigned int flags);
+void rt2800_link_stats(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
+void rt2800_reset_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual);
+void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
+		       const u32 count);
+
+int rt2800_init_registers(struct rt2x00_dev *rt2x00dev);
+int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev);
+int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev);
+
+int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
+void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
+int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
+int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
+int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
+
+extern const struct ieee80211_ops rt2800_mac80211_ops;
+
+#endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
new file mode 100644
index 0000000..dfc886f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -0,0 +1,1322 @@
+/*
+	Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
+	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+	Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
+	Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+	Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
+	Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+	Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800pci
+	Abstract: rt2800pci device specific routines.
+	Supported chipsets: RT2800E & RT2800ED.
+ */
+
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rt2x00.h"
+#include "rt2x00pci.h"
+#include "rt2x00soc.h"
+#include "rt2800lib.h"
+#include "rt2800.h"
+#include "rt2800pci.h"
+
+#ifdef CONFIG_RT2800PCI_PCI_MODULE
+#define CONFIG_RT2800PCI_PCI
+#endif
+
+#ifdef CONFIG_RT2800PCI_WISOC_MODULE
+#define CONFIG_RT2800PCI_WISOC
+#endif
+
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 1;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < 200; i++) {
+		rt2800_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
+
+		if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
+		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
+		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
+		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
+			break;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	if (i == 200)
+		ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
+
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+}
+
+#ifdef CONFIG_RT2800PCI_WISOC
+static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
+{
+	u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
+
+	memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
+}
+#else
+static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
+{
+}
+#endif /* CONFIG_RT2800PCI_WISOC */
+
+#ifdef CONFIG_RT2800PCI_PCI
+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
+{
+	struct rt2x00_dev *rt2x00dev = eeprom->data;
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, E2PROM_CSR, &reg);
+
+	eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
+	eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
+	eeprom->reg_data_clock =
+	    !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
+	eeprom->reg_chip_select =
+	    !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
+}
+
+static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
+{
+	struct rt2x00_dev *rt2x00dev = eeprom->data;
+	u32 reg = 0;
+
+	rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
+	rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
+	rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
+			   !!eeprom->reg_data_clock);
+	rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
+			   !!eeprom->reg_chip_select);
+
+	rt2800_register_write(rt2x00dev, E2PROM_CSR, reg);
+}
+
+static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
+{
+	struct eeprom_93cx6 eeprom;
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, E2PROM_CSR, &reg);
+
+	eeprom.data = rt2x00dev;
+	eeprom.register_read = rt2800pci_eepromregister_read;
+	eeprom.register_write = rt2800pci_eepromregister_write;
+	eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
+	    PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
+	eeprom.reg_data_in = 0;
+	eeprom.reg_data_out = 0;
+	eeprom.reg_data_clock = 0;
+	eeprom.reg_chip_select = 0;
+
+	eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
+			       EEPROM_SIZE / sizeof(u16));
+}
+
+static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2800_efuse_detect(rt2x00dev);
+}
+
+static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
+{
+	rt2800_read_eeprom_efuse(rt2x00dev);
+}
+#else
+static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
+{
+}
+
+static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev)
+{
+	return 0;
+}
+
+static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
+{
+}
+#endif /* CONFIG_RT2800PCI_PCI */
+
+/*
+ * Firmware functions
+ */
+static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
+{
+	return FIRMWARE_RT2860;
+}
+
+static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
+				    const u8 *data, const size_t len)
+{
+	u16 fw_crc;
+	u16 crc;
+
+	/*
+	 * Only support 8kb firmware files.
+	 */
+	if (len != 8192)
+		return FW_BAD_LENGTH;
+
+	/*
+	 * The last 2 bytes in the firmware array are the crc checksum itself,
+	 * this means that we should never pass those 2 bytes to the crc
+	 * algorithm.
+	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc ccitt algorithm.
+	 * This will return the same value as the legacy driver which
+	 * used bit ordering reversion on the both the firmware bytes
+	 * before input input as well as on the final output.
+	 * Obviously using crc ccitt directly is much more efficient.
+	 */
+	crc = crc_ccitt(~0, data, len - 2);
+
+	/*
+	 * There is a small difference between the crc-itu-t + bitrev and
+	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
+	 * will be swapped, use swab16 to convert the crc to the correct
+	 * value.
+	 */
+	crc = swab16(crc);
+
+	return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
+}
+
+static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
+				   const u8 *data, const size_t len)
+{
+	unsigned int i;
+	u32 reg;
+
+	/*
+	 * Wait for stable hardware.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
+	rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
+
+	/*
+	 * Disable DMA, will be reenabled later when enabling
+	 * the radio.
+	 */
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	/*
+	 * enable Host program ram write selection
+	 */
+	reg = 0;
+	rt2x00_set_field32(&reg, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
+
+	/*
+	 * Write firmware to device.
+	 */
+	rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+				      data, len);
+
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
+
+	/*
+	 * Wait for device to stabilize.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "PBF system register not ready.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Disable interrupts
+	 */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
+
+	/*
+	 * Initialize BBP R/W access agent
+	 */
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+
+	return 0;
+}
+
+/*
+ * Initialization functions.
+ */
+static bool rt2800pci_get_entry_state(struct queue_entry *entry)
+{
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	u32 word;
+
+	if (entry->queue->qid == QID_RX) {
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+
+		return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
+	} else {
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+
+		return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
+	}
+}
+
+static void rt2800pci_clear_entry(struct queue_entry *entry)
+{
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	u32 word;
+
+	if (entry->queue->qid == QID_RX) {
+		rt2x00_desc_read(entry_priv->desc, 0, &word);
+		rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
+		rt2x00_desc_write(entry_priv->desc, 0, word);
+
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+		rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
+		rt2x00_desc_write(entry_priv->desc, 1, word);
+	} else {
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+		rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
+		rt2x00_desc_write(entry_priv->desc, 1, word);
+	}
+}
+
+static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
+{
+	struct queue_entry_priv_pci *entry_priv;
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+
+	/*
+	 * Initialize registers.
+	 */
+	entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX0, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX0, 0);
+
+	entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX1, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX1, 0);
+
+	entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX2, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX2, 0);
+
+	entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
+	rt2800_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX3, 0);
+	rt2800_register_write(rt2x00dev, TX_DTX_IDX3, 0);
+
+	entry_priv = rt2x00dev->rx->entries[0].priv_data;
+	rt2800_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+	rt2800_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
+	rt2800_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
+	rt2800_register_write(rt2x00dev, RX_DRX_IDX, 0);
+
+	/*
+	 * Enable global DMA configuration
+	 */
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, DELAY_INT_CFG, 0);
+
+	return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
+				enum dev_state state)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
+			   (state == STATE_RADIO_RX_ON) ||
+			   (state == STATE_RADIO_RX_ON_LINK));
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+}
+
+static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
+				 enum dev_state state)
+{
+	int mask = (state == STATE_RADIO_IRQ_ON);
+	u32 reg;
+
+	/*
+	 * When interrupts are being enabled, the interrupt registers
+	 * should clear the register to assure a clean state.
+	 */
+	if (state == STATE_RADIO_IRQ_ON) {
+		rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+		rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+	}
+
+	rt2800_register_read(rt2x00dev, INT_MASK_CSR, &reg);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RXDELAYINT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TXDELAYINT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RX_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC0_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC1_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC2_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC3_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_HCCA_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_MGMT_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_MCU_COMMAND, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RXTX_COHERENT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TBTT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_PRE_TBTT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TX_FIFO_STATUS, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AUTO_WAKEUP, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_GPTIMER, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RX_COHERENT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TX_COHERENT, mask);
+	rt2800_register_write(rt2x00dev, INT_MASK_CSR, reg);
+}
+
+static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 word;
+
+	/*
+	 * Initialize all registers.
+	 */
+	if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800pci_init_queues(rt2x00dev) ||
+		     rt2800_init_registers(rt2x00dev) ||
+		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800_init_bbp(rt2x00dev) ||
+		     rt2800_init_rfcsr(rt2x00dev)))
+		return -EIO;
+
+	/*
+	 * Send signal to firmware during boot time.
+	 */
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+
+	/*
+	 * Enable RX.
+	 */
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	/*
+	 * Initialize LED control
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
+	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
+	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
+	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	return 0;
+}
+
+static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
+
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+
+	/* Wait for DMA, ignore error */
+	rt2800pci_wait_wpdma_ready(rt2x00dev);
+}
+
+static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
+			       enum dev_state state)
+{
+	/*
+	 * Always put the device to sleep (even when we intend to wakeup!)
+	 * if the device is booting and wasn't asleep it will return
+	 * failure when attempting to wakeup.
+	 */
+	rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+	if (state == STATE_AWAKE) {
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
+		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+	}
+
+	return 0;
+}
+
+static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
+				      enum dev_state state)
+{
+	int retval = 0;
+
+	switch (state) {
+	case STATE_RADIO_ON:
+		/*
+		 * Before the radio can be enabled, the device first has
+		 * to be woken up. After that it needs a bit of time
+		 * to be fully awake and then the radio can be enabled.
+		 */
+		rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
+		msleep(1);
+		retval = rt2800pci_enable_radio(rt2x00dev);
+		break;
+	case STATE_RADIO_OFF:
+		/*
+		 * After the radio has been disabled, the device should
+		 * be put to sleep for powersaving.
+		 */
+		rt2800pci_disable_radio(rt2x00dev);
+		rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
+		break;
+	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+	case STATE_RADIO_RX_OFF:
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2800pci_toggle_rx(rt2x00dev, state);
+		break;
+	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_OFF:
+		rt2800pci_toggle_irq(rt2x00dev, state);
+		break;
+	case STATE_DEEP_SLEEP:
+	case STATE_SLEEP:
+	case STATE_STANDBY:
+	case STATE_AWAKE:
+		retval = rt2800pci_set_state(rt2x00dev, state);
+		break;
+	default:
+		retval = -ENOTSUPP;
+		break;
+	}
+
+	if (unlikely(retval))
+		ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+		      state, retval);
+
+	return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+				    struct sk_buff *skb,
+				    struct txentry_desc *txdesc)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	__le32 *txd = skbdesc->desc;
+	__le32 *txwi = (__le32 *)(skb->data - rt2x00dev->ops->extra_tx_headroom);
+	u32 word;
+
+	/*
+	 * Initialize TX Info descriptor
+	 */
+	rt2x00_desc_read(txwi, 0, &word);
+	rt2x00_set_field32(&word, TXWI_W0_FRAG,
+			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+	rt2x00_set_field32(&word, TXWI_W0_TS,
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+	rt2x00_set_field32(&word, TXWI_W0_BW,
+			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+	rt2x00_desc_write(txwi, 0, word);
+
+	rt2x00_desc_read(txwi, 1, &word);
+	rt2x00_set_field32(&word, TXWI_W1_ACK,
+			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+			   txdesc->key_idx : 0xff);
+	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+			   skb->len - txdesc->l2pad);
+	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
+			   skbdesc->entry->queue->qid + 1);
+	rt2x00_desc_write(txwi, 1, word);
+
+	/*
+	 * Always write 0 to IV/EIV fields, hardware will insert the IV
+	 * from the IVEIV register when TXD_W3_WIV is set to 0.
+	 * When TXD_W3_WIV is set to 1 it will use the IV data
+	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+	 * crypto entry in the registers should be used to encrypt the frame.
+	 */
+	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+
+	/*
+	 * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1
+	 * must contains a TXWI structure + 802.11 header + padding + 802.11
+	 * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and
+	 * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11
+	 * data. It means that LAST_SEC0 is always 0.
+	 */
+
+	/*
+	 * Initialize TX descriptor
+	 */
+	rt2x00_desc_read(txd, 0, &word);
+	rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
+	rt2x00_desc_write(txd, 0, word);
+
+	rt2x00_desc_read(txd, 1, &word);
+	rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len);
+	rt2x00_set_field32(&word, TXD_W1_LAST_SEC1,
+			   !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W1_BURST,
+			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
+			   rt2x00dev->ops->extra_tx_headroom);
+	rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0);
+	rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
+	rt2x00_desc_write(txd, 1, word);
+
+	rt2x00_desc_read(txd, 2, &word);
+	rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
+			   skbdesc->skb_dma + rt2x00dev->ops->extra_tx_headroom);
+	rt2x00_desc_write(txd, 2, word);
+
+	rt2x00_desc_read(txd, 3, &word);
+	rt2x00_set_field32(&word, TXD_W3_WIV,
+			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
+	rt2x00_desc_write(txd, 3, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2800pci_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	/*
+	 * Write entire beacon with descriptor to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2800_register_multiwrite(rt2x00dev,
+				      beacon_base,
+				      skbdesc->desc, skbdesc->desc_len);
+	rt2800_register_multiwrite(rt2x00dev,
+				      beacon_base + skbdesc->desc_len,
+				      entry->skb->data, entry->skb->len);
+
+	/*
+	 * Clean up beacon skb.
+	 */
+	dev_kfree_skb_any(entry->skb);
+	entry->skb = NULL;
+}
+
+static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid queue_idx)
+{
+	struct data_queue *queue;
+	unsigned int idx, qidx = 0;
+	u32 reg;
+
+	if (queue_idx == QID_BEACON) {
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+			rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		}
+		return;
+	}
+
+	if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
+		return;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+	idx = queue->index[Q_INDEX];
+
+	if (queue_idx == QID_MGMT)
+		qidx = 5;
+	else
+		qidx = queue_idx;
+
+	rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
+}
+
+static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid qid)
+{
+	u32 reg;
+
+	if (qid == QID_BEACON) {
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0);
+		return;
+	}
+
+	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
+	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+}
+
+/*
+ * RX control handlers
+ */
+static void rt2800pci_fill_rxdone(struct queue_entry *entry,
+				  struct rxdone_entry_desc *rxdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	__le32 *rxd = entry_priv->desc;
+	__le32 *rxwi = (__le32 *)entry->skb->data;
+	u32 rxd3;
+	u32 rxwi0;
+	u32 rxwi1;
+	u32 rxwi2;
+	u32 rxwi3;
+
+	rt2x00_desc_read(rxd, 3, &rxd3);
+	rt2x00_desc_read(rxwi, 0, &rxwi0);
+	rt2x00_desc_read(rxwi, 1, &rxwi1);
+	rt2x00_desc_read(rxwi, 2, &rxwi2);
+	rt2x00_desc_read(rxwi, 3, &rxwi3);
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
+		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		/*
+		 * Unfortunately we don't know the cipher type used during
+		 * decryption. This prevents us from correct providing
+		 * correct statistics through debugfs.
+		 */
+		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+		rxdesc->cipher_status =
+		    rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
+	}
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
+		/*
+		 * Hardware has stripped IV/EIV data from 802.11 frame during
+		 * decryption. Unfortunately the descriptor doesn't contain
+		 * any fields with the EIV/IV data either, so they can't
+		 * be restored by rt2x00lib.
+		 */
+		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+			rxdesc->flags |= RX_FLAG_DECRYPTED;
+		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
+		rxdesc->dev_flags |= RXDONE_MY_BSS;
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) {
+		rxdesc->dev_flags |= RXDONE_L2PAD;
+		skbdesc->flags |= SKBDESC_L2_PADDED;
+	}
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
+		rxdesc->flags |= RX_FLAG_SHORT_GI;
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
+		rxdesc->flags |= RX_FLAG_40MHZ;
+
+	/*
+	 * Detect RX rate, always use MCS as signal type.
+	 */
+	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
+	rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
+	rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
+
+	/*
+	 * Mask of 0x8 bit to remove the short preamble flag.
+	 */
+	if (rxdesc->rate_mode == RATE_MODE_CCK)
+		rxdesc->signal &= ~0x8;
+
+	rxdesc->rssi =
+	    (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
+	     rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
+
+	rxdesc->noise =
+	    (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
+	     rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
+
+	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+	/*
+	 * Set RX IDX in register to inform hardware that we have handled
+	 * this entry and it is available for reuse again.
+	 */
+	rt2800_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
+
+	/*
+	 * Remove TXWI descriptor from start of buffer.
+	 */
+	skb_pull(entry->skb, RXWI_DESC_SIZE);
+	skb_trim(entry->skb, rxdesc->size);
+}
+
+/*
+ * Interrupt functions.
+ */
+static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+	struct queue_entry *entry;
+	struct queue_entry *entry_done;
+	struct queue_entry_priv_pci *entry_priv;
+	struct txdone_entry_desc txdesc;
+	u32 word;
+	u32 reg;
+	u32 old_reg;
+	unsigned int type;
+	unsigned int index;
+	u16 mcs, real_mcs;
+
+	/*
+	 * During each loop we will compare the freshly read
+	 * TX_STA_FIFO register value with the value read from
+	 * the previous loop. If the 2 values are equal then
+	 * we should stop processing because the chance it
+	 * quite big that the device has been unplugged and
+	 * we risk going into an endless loop.
+	 */
+	old_reg = 0;
+
+	while (1) {
+		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
+		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
+			break;
+
+		if (old_reg == reg)
+			break;
+		old_reg = reg;
+
+		/*
+		 * Skip this entry when it contains an invalid
+		 * queue identication number.
+		 */
+		type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE) - 1;
+		if (type >= QID_RX)
+			continue;
+
+		queue = rt2x00queue_get_queue(rt2x00dev, type);
+		if (unlikely(!queue))
+			continue;
+
+		/*
+		 * Skip this entry when it contains an invalid
+		 * index number.
+		 */
+		index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID) - 1;
+		if (unlikely(index >= queue->limit))
+			continue;
+
+		entry = &queue->entries[index];
+		entry_priv = entry->priv_data;
+		rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word);
+
+		entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+		while (entry != entry_done) {
+			/*
+			 * Catch up.
+			 * Just report any entries we missed as failed.
+			 */
+			WARNING(rt2x00dev,
+				"TX status report missed for entry %d\n",
+				entry_done->entry_idx);
+
+			txdesc.flags = 0;
+			__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
+			txdesc.retry = 0;
+
+			rt2x00lib_txdone(entry_done, &txdesc);
+			entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+		}
+
+		/*
+		 * Obtain the status about this packet.
+		 */
+		txdesc.flags = 0;
+		if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS))
+			__set_bit(TXDONE_SUCCESS, &txdesc.flags);
+		else
+			__set_bit(TXDONE_FAILURE, &txdesc.flags);
+
+		/*
+		 * Ralink has a retry mechanism using a global fallback
+		 * table. We setup this fallback table to try immediate
+		 * lower rate for all rates. In the TX_STA_FIFO,
+		 * the MCS field contains the MCS used for the successfull
+		 * transmission. If the first transmission succeed,
+		 * we have mcs == tx_mcs. On the second transmission,
+		 * we have mcs = tx_mcs - 1. So the number of
+		 * retry is (tx_mcs - mcs).
+		 */
+		mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
+		real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+		__set_bit(TXDONE_FALLBACK, &txdesc.flags);
+		txdesc.retry = mcs - min(mcs, real_mcs);
+
+		rt2x00lib_txdone(entry, &txdesc);
+	}
+}
+
+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg;
+
+	/* Read status and ACK all interrupts */
+	rt2800_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+	rt2800_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return IRQ_HANDLED;
+
+	/*
+	 * 1 - Rx ring done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
+		rt2x00pci_rxdone(rt2x00dev);
+
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
+		rt2800pci_txdone(rt2x00dev);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	/*
+	 * Read EEPROM into buffer
+	 */
+	switch (rt2x00dev->chip.rt) {
+	case RT2880:
+	case RT3052:
+		rt2800pci_read_eeprom_soc(rt2x00dev);
+		break;
+	default:
+		if (rt2800pci_efuse_detect(rt2x00dev))
+			rt2800pci_read_eeprom_efuse(rt2x00dev);
+		else
+			rt2800pci_read_eeprom_pci(rt2x00dev);
+		break;
+	}
+
+	return rt2800_validate_eeprom(rt2x00dev);
+}
+
+static const struct rt2800_ops rt2800pci_rt2800_ops = {
+	.register_read		= rt2x00pci_register_read,
+	.register_read_lock	= rt2x00pci_register_read, /* same for PCI */
+	.register_write		= rt2x00pci_register_write,
+	.register_write_lock	= rt2x00pci_register_write, /* same for PCI */
+
+	.register_multiread	= rt2x00pci_register_multiread,
+	.register_multiwrite	= rt2x00pci_register_multiwrite,
+
+	.regbusy_read		= rt2x00pci_regbusy_read,
+};
+
+static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+
+	rt2x00dev->priv = (void *)&rt2800pci_rt2800_ops;
+
+	/*
+	 * Allocate eeprom data.
+	 */
+	retval = rt2800pci_validate_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	retval = rt2800_init_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Initialize hw specifications.
+	 */
+	retval = rt2800_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * This device has multiple filters for control frames
+	 * and has a separate filter for PS Poll frames.
+	 */
+	__set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
+
+	/*
+	 * This device requires firmware.
+	 */
+	if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
+	    !rt2x00_rt(&rt2x00dev->chip, RT3052))
+		__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+
+	/*
+	 * Set the rssi offset.
+	 */
+	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+	return 0;
+}
+
+static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
+	.irq_handler		= rt2800pci_interrupt,
+	.probe_hw		= rt2800pci_probe_hw,
+	.get_firmware_name	= rt2800pci_get_firmware_name,
+	.check_firmware		= rt2800pci_check_firmware,
+	.load_firmware		= rt2800pci_load_firmware,
+	.initialize		= rt2x00pci_initialize,
+	.uninitialize		= rt2x00pci_uninitialize,
+	.get_entry_state	= rt2800pci_get_entry_state,
+	.clear_entry		= rt2800pci_clear_entry,
+	.set_device_state	= rt2800pci_set_device_state,
+	.rfkill_poll		= rt2800_rfkill_poll,
+	.link_stats		= rt2800_link_stats,
+	.reset_tuner		= rt2800_reset_tuner,
+	.link_tuner		= rt2800_link_tuner,
+	.write_tx_desc		= rt2800pci_write_tx_desc,
+	.write_tx_data		= rt2x00pci_write_tx_data,
+	.write_beacon		= rt2800pci_write_beacon,
+	.kick_tx_queue		= rt2800pci_kick_tx_queue,
+	.kill_tx_queue		= rt2800pci_kill_tx_queue,
+	.fill_rxdone		= rt2800pci_fill_rxdone,
+	.config_shared_key	= rt2800_config_shared_key,
+	.config_pairwise_key	= rt2800_config_pairwise_key,
+	.config_filter		= rt2800_config_filter,
+	.config_intf		= rt2800_config_intf,
+	.config_erp		= rt2800_config_erp,
+	.config_ant		= rt2800_config_ant,
+	.config			= rt2800_config,
+};
+
+static const struct data_queue_desc rt2800pci_queue_rx = {
+	.entry_num		= RX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= RXD_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct data_queue_desc rt2800pci_queue_tx = {
+	.entry_num		= TX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= TXD_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct data_queue_desc rt2800pci_queue_bcn = {
+	.entry_num		= 8 * BEACON_ENTRIES,
+	.data_size		= 0, /* No DMA required for beacons */
+	.desc_size		= TXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct rt2x00_ops rt2800pci_ops = {
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 8,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= TXWI_DESC_SIZE,
+	.rx			= &rt2800pci_queue_rx,
+	.tx			= &rt2800pci_queue_tx,
+	.bcn			= &rt2800pci_queue_bcn,
+	.lib			= &rt2800pci_rt2x00_ops,
+	.hw			= &rt2800_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+	.debugfs		= &rt2800_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * RT2800pci module information.
+ */
+static struct pci_device_id rt2800pci_device_table[] = {
+	{ PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
+#ifdef CONFIG_RT2800PCI_PCI
+MODULE_FIRMWARE(FIRMWARE_RT2860);
+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
+#endif /* CONFIG_RT2800PCI_PCI */
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_RT2800PCI_WISOC
+#if defined(CONFIG_RALINK_RT288X)
+__rt2x00soc_probe(RT2880, &rt2800pci_ops);
+#elif defined(CONFIG_RALINK_RT305X)
+__rt2x00soc_probe(RT3052, &rt2800pci_ops);
+#endif
+
+static struct platform_driver rt2800soc_driver = {
+	.driver		= {
+		.name		= "rt2800_wmac",
+		.owner		= THIS_MODULE,
+		.mod_name	= KBUILD_MODNAME,
+	},
+	.probe		= __rt2x00soc_probe,
+	.remove		= __devexit_p(rt2x00soc_remove),
+	.suspend	= rt2x00soc_suspend,
+	.resume		= rt2x00soc_resume,
+};
+#endif /* CONFIG_RT2800PCI_WISOC */
+
+#ifdef CONFIG_RT2800PCI_PCI
+static struct pci_driver rt2800pci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rt2800pci_device_table,
+	.probe		= rt2x00pci_probe,
+	.remove		= __devexit_p(rt2x00pci_remove),
+	.suspend	= rt2x00pci_suspend,
+	.resume		= rt2x00pci_resume,
+};
+#endif /* CONFIG_RT2800PCI_PCI */
+
+static int __init rt2800pci_init(void)
+{
+	int ret = 0;
+
+#ifdef CONFIG_RT2800PCI_WISOC
+	ret = platform_driver_register(&rt2800soc_driver);
+	if (ret)
+		return ret;
+#endif
+#ifdef CONFIG_RT2800PCI_PCI
+	ret = pci_register_driver(&rt2800pci_driver);
+	if (ret) {
+#ifdef CONFIG_RT2800PCI_WISOC
+		platform_driver_unregister(&rt2800soc_driver);
+#endif
+		return ret;
+	}
+#endif
+
+	return ret;
+}
+
+static void __exit rt2800pci_exit(void)
+{
+#ifdef CONFIG_RT2800PCI_PCI
+	pci_unregister_driver(&rt2800pci_driver);
+#endif
+#ifdef CONFIG_RT2800PCI_WISOC
+	platform_driver_unregister(&rt2800soc_driver);
+#endif
+}
+
+module_init(rt2800pci_init);
+module_exit(rt2800pci_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
new file mode 100644
index 0000000..afc8e7d
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -0,0 +1,159 @@
+/*
+	Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2009 Alban Browaeys <prahal@yahoo.com>
+	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+	Copyright (C) 2009 Luis Correia <luis.f.correia@gmail.com>
+	Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+	Copyright (C) 2009 Mark Asselstine <asselsm@gmail.com>
+	Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+	Copyright (C) 2009 Bart Zolnierkiewicz <bzolnier@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800pci
+	Abstract: Data structures and registers for the rt2800pci module.
+	Supported chipsets: RT2800E & RT2800ED.
+ */
+
+#ifndef RT2800PCI_H
+#define RT2800PCI_H
+
+/*
+ * PCI registers.
+ */
+
+/*
+ * E2PROM_CSR: EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR			0x0004
+#define E2PROM_CSR_DATA_CLOCK		FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT		FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN		FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT		FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE			FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS		FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD		FIELD32(0x00000080)
+
+/*
+ * Queue register offset macros
+ */
+#define TX_QUEUE_REG_OFFSET		0x10
+#define TX_BASE_PTR(__x)		TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_MAX_CNT(__x)			TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_CTX_IDX(__x)			TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_DTX_IDX(__x)			TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
+
+/*
+ * 8051 firmware image.
+ */
+#define FIRMWARE_RT2860			"rt2860.bin"
+#define FIRMWARE_IMAGE_BASE		0x2000
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE			( 4 * sizeof(__le32) )
+
+/*
+ * TX descriptor format for TX, PRIO and Beacon Ring.
+ */
+
+/*
+ * Word0
+ */
+#define TXD_W0_SD_PTR0			FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define TXD_W1_SD_LEN1			FIELD32(0x00003fff)
+#define TXD_W1_LAST_SEC1		FIELD32(0x00004000)
+#define TXD_W1_BURST			FIELD32(0x00008000)
+#define TXD_W1_SD_LEN0			FIELD32(0x3fff0000)
+#define TXD_W1_LAST_SEC0		FIELD32(0x40000000)
+#define TXD_W1_DMA_DONE			FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define TXD_W2_SD_PTR1			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ *       0:MGMT, 1:HCCA 2:EDCA
+ */
+#define TXD_W3_WIV			FIELD32(0x01000000)
+#define TXD_W3_QSEL			FIELD32(0x06000000)
+#define TXD_W3_TCO			FIELD32(0x20000000)
+#define TXD_W3_UCO			FIELD32(0x40000000)
+#define TXD_W3_ICO			FIELD32(0x80000000)
+
+/*
+ * RX descriptor format for RX Ring.
+ */
+
+/*
+ * Word0
+ */
+#define RXD_W0_SDP0			FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define RXD_W1_SDL1			FIELD32(0x00003fff)
+#define RXD_W1_SDL0			FIELD32(0x3fff0000)
+#define RXD_W1_LS0			FIELD32(0x40000000)
+#define RXD_W1_DMA_DONE			FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define RXD_W2_SDP1			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * AMSDU: RX with 802.3 header, not 802.11 header.
+ * DECRYPTED: This frame is being decrypted.
+ */
+#define RXD_W3_BA			FIELD32(0x00000001)
+#define RXD_W3_DATA			FIELD32(0x00000002)
+#define RXD_W3_NULLDATA			FIELD32(0x00000004)
+#define RXD_W3_FRAG			FIELD32(0x00000008)
+#define RXD_W3_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXD_W3_MULTICAST		FIELD32(0x00000020)
+#define RXD_W3_BROADCAST		FIELD32(0x00000040)
+#define RXD_W3_MY_BSS			FIELD32(0x00000080)
+#define RXD_W3_CRC_ERROR		FIELD32(0x00000100)
+#define RXD_W3_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXD_W3_AMSDU			FIELD32(0x00000800)
+#define RXD_W3_HTC			FIELD32(0x00001000)
+#define RXD_W3_RSSI			FIELD32(0x00002000)
+#define RXD_W3_L2PAD			FIELD32(0x00004000)
+#define RXD_W3_AMPDU			FIELD32(0x00008000)
+#define RXD_W3_DECRYPTED		FIELD32(0x00010000)
+#define RXD_W3_PLCP_SIGNAL		FIELD32(0x00020000)
+#define RXD_W3_PLCP_RSSI		FIELD32(0x00040000)
+
+#endif /* RT2800PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 9fe770f..af85d18 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1,5 +1,9 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+	Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+	Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -34,6 +38,8 @@
 
 #include "rt2x00.h"
 #include "rt2x00usb.h"
+#include "rt2800lib.h"
+#include "rt2800.h"
 #include "rt2800usb.h"
 
 /*
@@ -44,1027 +50,6 @@
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
 /*
- * Register access.
- * All access to the CSR registers will go through the methods
- * rt2x00usb_register_read and rt2x00usb_register_write.
- * BBP and RF register require indirect register access,
- * and use the CSR registers BBPCSR and RFCSR to achieve this.
- * These indirect registers work with busy bits,
- * and we will try maximal REGISTER_BUSY_COUNT times to access
- * the register while taking a REGISTER_BUSY_DELAY us delay
- * between each attampt. When the busy bit is still set at that time,
- * the access attempt is considered to have failed,
- * and we will print an error.
- * The _lock versions must be used if you already hold the csr_mutex
- */
-#define WAIT_FOR_BBP(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RFCSR(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
-#define WAIT_FOR_RF(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
-#define WAIT_FOR_MCU(__dev, __reg) \
-	rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
-			       H2M_MAILBOX_CSR_OWNER, (__reg))
-
-static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
-				const unsigned int word, const u8 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the BBP becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-
-		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
-			       const unsigned int word, u8 *value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the BBP becomes available, afterwards we
-	 * can safely write the read request into the register.
-	 * After the data has been written, we wait until hardware
-	 * returns the correct value, if at any time the register
-	 * doesn't become available in time, reg will be 0xffffffff
-	 * which means we return 0xff to the caller.
-	 */
-	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-
-		WAIT_FOR_BBP(rt2x00dev, &reg);
-	}
-
-	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rfcsr_write(struct rt2x00_dev *rt2x00dev,
-				  const unsigned int word, const u8 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RFCSR becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rfcsr_read(struct rt2x00_dev *rt2x00dev,
-				 const unsigned int word, u8 *value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RFCSR becomes available, afterwards we
-	 * can safely write the read request into the register.
-	 * After the data has been written, we wait until hardware
-	 * returns the correct value, if at any time the register
-	 * doesn't become available in time, reg will be 0xffffffff
-	 * which means we return 0xff to the caller.
-	 */
-	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-
-		WAIT_FOR_RFCSR(rt2x00dev, &reg);
-	}
-
-	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
-			       const unsigned int word, const u32 value)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the RF becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
-		reg = 0;
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
-		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
-
-		rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
-		rt2x00_rf_write(rt2x00dev, word, value);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
-				  const u8 command, const u8 token,
-				  const u8 arg0, const u8 arg1)
-{
-	u32 reg;
-
-	mutex_lock(&rt2x00dev->csr_mutex);
-
-	/*
-	 * Wait until the MCU becomes available, afterwards we
-	 * can safely write the new data into the register.
-	 */
-	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
-		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
-		rt2x00usb_register_write_lock(rt2x00dev, H2M_MAILBOX_CSR, reg);
-
-		reg = 0;
-		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
-		rt2x00usb_register_write_lock(rt2x00dev, HOST_CMD_CSR, reg);
-	}
-
-	mutex_unlock(&rt2x00dev->csr_mutex);
-}
-
-#ifdef CONFIG_RT2X00_LIB_DEBUGFS
-static const struct rt2x00debug rt2800usb_rt2x00debug = {
-	.owner	= THIS_MODULE,
-	.csr	= {
-		.read		= rt2x00usb_register_read,
-		.write		= rt2x00usb_register_write,
-		.flags		= RT2X00DEBUGFS_OFFSET,
-		.word_base	= CSR_REG_BASE,
-		.word_size	= sizeof(u32),
-		.word_count	= CSR_REG_SIZE / sizeof(u32),
-	},
-	.eeprom	= {
-		.read		= rt2x00_eeprom_read,
-		.write		= rt2x00_eeprom_write,
-		.word_base	= EEPROM_BASE,
-		.word_size	= sizeof(u16),
-		.word_count	= EEPROM_SIZE / sizeof(u16),
-	},
-	.bbp	= {
-		.read		= rt2800usb_bbp_read,
-		.write		= rt2800usb_bbp_write,
-		.word_base	= BBP_BASE,
-		.word_size	= sizeof(u8),
-		.word_count	= BBP_SIZE / sizeof(u8),
-	},
-	.rf	= {
-		.read		= rt2x00_rf_read,
-		.write		= rt2800usb_rf_write,
-		.word_base	= RF_BASE,
-		.word_size	= sizeof(u32),
-		.word_count	= RF_SIZE / sizeof(u32),
-	},
-};
-#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
-
-static int rt2800usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
-	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
-}
-
-#ifdef CONFIG_RT2X00_LIB_LEDS
-static void rt2800usb_brightness_set(struct led_classdev *led_cdev,
-				     enum led_brightness brightness)
-{
-	struct rt2x00_led *led =
-	    container_of(led_cdev, struct rt2x00_led, led_dev);
-	unsigned int enabled = brightness != LED_OFF;
-	unsigned int bg_mode =
-	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
-	unsigned int polarity =
-		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-				   EEPROM_FREQ_LED_POLARITY);
-	unsigned int ledmode =
-		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
-				   EEPROM_FREQ_LED_MODE);
-
-	if (led->type == LED_TYPE_RADIO) {
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-				      enabled ? 0x20 : 0);
-	} else if (led->type == LED_TYPE_ASSOC) {
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
-				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
-	} else if (led->type == LED_TYPE_QUALITY) {
-		/*
-		 * The brightness is divided into 6 levels (0 - 5),
-		 * The specs tell us the following levels:
-		 *	0, 1 ,3, 7, 15, 31
-		 * to determine the level in a simple way we can simply
-		 * work with bitshifting:
-		 *	(1 << level) - 1
-		 */
-		rt2800usb_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
-				      (1 << brightness / (LED_FULL / 6)) - 1,
-				      polarity);
-	}
-}
-
-static int rt2800usb_blink_set(struct led_classdev *led_cdev,
-			       unsigned long *delay_on,
-			       unsigned long *delay_off)
-{
-	struct rt2x00_led *led =
-	    container_of(led_cdev, struct rt2x00_led, led_dev);
-	u32 reg;
-
-	rt2x00usb_register_read(led->rt2x00dev, LED_CFG, &reg);
-	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
-	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
-	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
-	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
-	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
-	rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
-
-	return 0;
-}
-
-static void rt2800usb_init_led(struct rt2x00_dev *rt2x00dev,
-			       struct rt2x00_led *led,
-			       enum led_type type)
-{
-	led->rt2x00dev = rt2x00dev;
-	led->type = type;
-	led->led_dev.brightness_set = rt2800usb_brightness_set;
-	led->led_dev.blink_set = rt2800usb_blink_set;
-	led->flags = LED_INITIALIZED;
-}
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-/*
- * Configuration handlers.
- */
-static void rt2800usb_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00lib_crypto *crypto,
-				       struct ieee80211_key_conf *key)
-{
-	struct mac_wcid_entry wcid_entry;
-	struct mac_iveiv_entry iveiv_entry;
-	u32 offset;
-	u32 reg;
-
-	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
-			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
-			   (crypto->cmd == SET_KEY) * crypto->bssidx);
-	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
-
-	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
-	if ((crypto->cipher == CIPHER_TKIP) ||
-	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
-	    (crypto->cipher == CIPHER_AES))
-		iveiv_entry.iv[3] |= 0x20;
-	iveiv_entry.iv[3] |= key->keyidx << 6;
-	rt2x00usb_register_multiwrite(rt2x00dev, offset,
-				      &iveiv_entry, sizeof(iveiv_entry));
-
-	offset = MAC_WCID_ENTRY(key->hw_key_idx);
-
-	memset(&wcid_entry, 0, sizeof(wcid_entry));
-	if (crypto->cmd == SET_KEY)
-		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
-	rt2x00usb_register_multiwrite(rt2x00dev, offset,
-				      &wcid_entry, sizeof(wcid_entry));
-}
-
-static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
-				       struct rt2x00lib_crypto *crypto,
-				       struct ieee80211_key_conf *key)
-{
-	struct hw_key_entry key_entry;
-	struct rt2x00_field32 field;
-	int timeout;
-	u32 offset;
-	u32 reg;
-
-	if (crypto->cmd == SET_KEY) {
-		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
-
-		memcpy(key_entry.key, crypto->key,
-		       sizeof(key_entry.key));
-		memcpy(key_entry.tx_mic, crypto->tx_mic,
-		       sizeof(key_entry.tx_mic));
-		memcpy(key_entry.rx_mic, crypto->rx_mic,
-		       sizeof(key_entry.rx_mic));
-
-		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT,
-						    offset, &key_entry,
-						    sizeof(key_entry),
-						    timeout);
-	}
-
-	/*
-	 * The cipher types are stored over multiple registers
-	 * starting with SHARED_KEY_MODE_BASE each word will have
-	 * 32 bits and contains the cipher types for 2 bssidx each.
-	 * Using the correct defines correctly will cause overhead,
-	 * so just calculate the correct offset.
-	 */
-	field.bit_offset = 4 * (key->hw_key_idx % 8);
-	field.bit_mask = 0x7 << field.bit_offset;
-
-	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, field,
-			   (crypto->cmd == SET_KEY) * crypto->cipher);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	/*
-	 * Update WCID information
-	 */
-	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
-	return 0;
-}
-
-static int rt2800usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
-					 struct rt2x00lib_crypto *crypto,
-					 struct ieee80211_key_conf *key)
-{
-	struct hw_key_entry key_entry;
-	int timeout;
-	u32 offset;
-
-	if (crypto->cmd == SET_KEY) {
-		/*
-		 * 1 pairwise key is possible per AID, this means that the AID
-		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
-		 * last possible shared key entry.
-		 */
-		if (crypto->aid > (256 - 32))
-			return -ENOSPC;
-
-		key->hw_key_idx = 32 + crypto->aid;
-
-		memcpy(key_entry.key, crypto->key,
-		       sizeof(key_entry.key));
-		memcpy(key_entry.tx_mic, crypto->tx_mic,
-		       sizeof(key_entry.tx_mic));
-		memcpy(key_entry.rx_mic, crypto->rx_mic,
-		       sizeof(key_entry.rx_mic));
-
-		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
-		timeout = REGISTER_TIMEOUT32(sizeof(key_entry));
-		rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-						    USB_VENDOR_REQUEST_OUT,
-						    offset, &key_entry,
-						    sizeof(key_entry),
-						    timeout);
-	}
-
-	/*
-	 * Update WCID information
-	 */
-	rt2800usb_config_wcid_attr(rt2x00dev, crypto, key);
-
-	return 0;
-}
-
-static void rt2800usb_config_filter(struct rt2x00_dev *rt2x00dev,
-				    const unsigned int filter_flags)
-{
-	u32 reg;
-
-	/*
-	 * Start configuration steps.
-	 * Note that the version error will always be dropped
-	 * and broadcast frames will always be accepted since
-	 * there is no filter for it at this time.
-	 */
-	rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
-			   !(filter_flags & FIF_FCSFAIL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
-			   !(filter_flags & FIF_PLCPFAIL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
-			   !(filter_flags & FIF_PROMISC_IN_BSS));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
-			   !(filter_flags & FIF_ALLMULTI));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
-			   !(filter_flags & FIF_PSPOLL));
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
-	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
-			   !(filter_flags & FIF_CONTROL));
-	rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
-}
-
-static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
-				  struct rt2x00_intf *intf,
-				  struct rt2x00intf_conf *conf,
-				  const unsigned int flags)
-{
-	unsigned int beacon_base;
-	u32 reg;
-
-	if (flags & CONFIG_UPDATE_TYPE) {
-		/*
-		 * Clear current synchronisation setup.
-		 * For the Beacon base registers we only need to clear
-		 * the first byte since that byte contains the VALID and OWNER
-		 * bits which (when set to 0) will invalidate the entire beacon.
-		 */
-		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-		rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
-
-		/*
-		 * Enable synchronisation.
-		 */
-		rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
-		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-	}
-
-	if (flags & CONFIG_UPDATE_MAC) {
-		reg = le32_to_cpu(conf->mac[1]);
-		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
-		conf->mac[1] = cpu_to_le32(reg);
-
-		rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
-					      conf->mac, sizeof(conf->mac));
-	}
-
-	if (flags & CONFIG_UPDATE_BSSID) {
-		reg = le32_to_cpu(conf->bssid[1]);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
-		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
-		conf->bssid[1] = cpu_to_le32(reg);
-
-		rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
-					      conf->bssid, sizeof(conf->bssid));
-	}
-}
-
-static void rt2800usb_config_erp(struct rt2x00_dev *rt2x00dev,
-				 struct rt2x00lib_erp *erp)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
-	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
-			   !!erp->short_preamble);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
-			   !!erp->short_preamble);
-	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
-			   erp->cts_protection ? 2 : 0);
-	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
-				 erp->basic_rates);
-	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-	rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
-	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
-	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-	rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
-	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-	rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
-			   erp->beacon_int * 16);
-	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-}
-
-static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
-				 struct antenna_setup *ant)
-{
-	u8 r1;
-	u8 r3;
-
-	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
-	rt2800usb_bbp_read(rt2x00dev, 3, &r3);
-
-	/*
-	 * Configure the TX antenna.
-	 */
-	switch ((int)ant->tx) {
-	case 1:
-		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
-		break;
-	case 2:
-		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
-		break;
-	case 3:
-		/* Do nothing */
-		break;
-	}
-
-	/*
-	 * Configure the RX antenna.
-	 */
-	switch ((int)ant->rx) {
-	case 1:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
-		break;
-	case 2:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
-		break;
-	case 3:
-		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
-		break;
-	}
-
-	rt2800usb_bbp_write(rt2x00dev, 3, r3);
-	rt2800usb_bbp_write(rt2x00dev, 1, r1);
-}
-
-static void rt2800usb_config_lna_gain(struct rt2x00_dev *rt2x00dev,
-				      struct rt2x00lib_conf *libconf)
-{
-	u16 eeprom;
-	short lna_gain;
-
-	if (libconf->rf.channel <= 14) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
-	} else if (libconf->rf.channel <= 64) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
-	} else if (libconf->rf.channel <= 128) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
-	} else {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
-		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
-	}
-
-	rt2x00dev->lna_gain = lna_gain;
-}
-
-static void rt2800usb_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
-					  struct ieee80211_conf *conf,
-					  struct rf_channel *rf,
-					  struct channel_info *info)
-{
-	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
-
-	if (rt2x00dev->default_ant.tx == 1)
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
-
-	if (rt2x00dev->default_ant.rx == 1) {
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-	} else if (rt2x00dev->default_ant.rx == 2)
-		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
-
-	if (rf->channel > 14) {
-		/*
-		 * When TX power is below 0, we should increase it by 7 to
-		 * make it a positive value (Minumum value is -7).
-		 * However this means that values between 0 and 7 have
-		 * double meaning, and we should set a 7DBm boost flag.
-		 */
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
-				   (info->tx_power1 >= 0));
-
-		if (info->tx_power1 < 0)
-			info->tx_power1 += 7;
-
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power1));
-
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
-				   (info->tx_power2 >= 0));
-
-		if (info->tx_power2 < 0)
-			info->tx_power2 += 7;
-
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power2));
-	} else {
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power1));
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power2));
-	}
-
-	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
-
-	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-
-	udelay(200);
-
-	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
-	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-
-	udelay(200);
-
-	rt2800usb_rf_write(rt2x00dev, 1, rf->rf1);
-	rt2800usb_rf_write(rt2x00dev, 2, rf->rf2);
-	rt2800usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
-	rt2800usb_rf_write(rt2x00dev, 4, rf->rf4);
-}
-
-static void rt2800usb_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
-					  struct ieee80211_conf *conf,
-					  struct rf_channel *rf,
-					  struct channel_info *info)
-{
-	u8 rfcsr;
-
-	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf1);
-	rt2800usb_rfcsr_write(rt2x00dev, 2, rf->rf3);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 6, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
-	rt2800usb_rfcsr_write(rt2x00dev, 6, rfcsr);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 12, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-			  TXPOWER_G_TO_DEV(info->tx_power1));
-	rt2800usb_rfcsr_write(rt2x00dev, 12, rfcsr);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
-	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
-
-	rt2800usb_rfcsr_write(rt2x00dev, 24,
-			      rt2x00dev->calibration[conf_is_ht40(conf)]);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 23, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
-	rt2800usb_rfcsr_write(rt2x00dev, 23, rfcsr);
-}
-
-static void rt2800usb_config_channel(struct rt2x00_dev *rt2x00dev,
-				     struct ieee80211_conf *conf,
-				     struct rf_channel *rf,
-				     struct channel_info *info)
-{
-	u32 reg;
-	unsigned int tx_pin;
-	u8 bbp;
-
-	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-		rt2800usb_config_channel_rt2x(rt2x00dev, conf, rf, info);
-	else
-		rt2800usb_config_channel_rt3x(rt2x00dev, conf, rf, info);
-
-	/*
-	 * Change BBP settings
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
-	rt2800usb_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
-	rt2800usb_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
-	rt2800usb_bbp_write(rt2x00dev, 86, 0);
-
-	if (rf->channel <= 14) {
-		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
-			rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
-		} else {
-			rt2800usb_bbp_write(rt2x00dev, 82, 0x84);
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
-		}
-	} else {
-		rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
-
-		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x46);
-		else
-			rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
-	}
-
-	rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
-	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
-	rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
-
-	tx_pin = 0;
-
-	/* Turn on unused PA or LNA when not using 1T or 1R */
-	if (rt2x00dev->default_ant.tx != 1) {
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
-	}
-
-	/* Turn on unused PA or LNA when not using 1T or 1R */
-	if (rt2x00dev->default_ant.rx != 1) {
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
-		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
-	}
-
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
-	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
-
-	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
-
-	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
-	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-
-	rt2800usb_bbp_read(rt2x00dev, 3, &bbp);
-	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
-	rt2800usb_bbp_write(rt2x00dev, 3, bbp);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		if (conf_is_ht40(conf)) {
-			rt2800usb_bbp_write(rt2x00dev, 69, 0x1a);
-			rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-			rt2800usb_bbp_write(rt2x00dev, 73, 0x16);
-		} else {
-			rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
-			rt2800usb_bbp_write(rt2x00dev, 70, 0x08);
-			rt2800usb_bbp_write(rt2x00dev, 73, 0x11);
-		}
-	}
-
-	msleep(1);
-}
-
-static void rt2800usb_config_txpower(struct rt2x00_dev *rt2x00dev,
-				     const int txpower)
-{
-	u32 reg;
-	u32 value = TXPOWER_G_TO_DEV(txpower);
-	u8 r1;
-
-	rt2800usb_bbp_read(rt2x00dev, 1, &r1);
-	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
-	rt2800usb_bbp_write(rt2x00dev, 1, r1);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
-	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-	rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
-}
-
-static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
-					 struct rt2x00lib_conf *libconf)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
-			   libconf->conf->short_frame_max_tx_count);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
-			   libconf->conf->long_frame_max_tx_count);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
-	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-	rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
-}
-
-static void rt2800usb_config_ps(struct rt2x00_dev *rt2x00dev,
-				struct rt2x00lib_conf *libconf)
-{
-	enum dev_state state =
-	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
-		STATE_SLEEP : STATE_AWAKE;
-	u32 reg;
-
-	if (state == STATE_SLEEP) {
-		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
-
-		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
-				   libconf->conf->listen_interval - 1);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
-		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-
-		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-	} else {
-		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
-		rt2x00usb_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
-		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
-		rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
-	}
-}
-
-static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
-			     struct rt2x00lib_conf *libconf,
-			     const unsigned int flags)
-{
-	/* Always recalculate LNA gain before changing configuration */
-	rt2800usb_config_lna_gain(rt2x00dev, libconf);
-
-	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
-		rt2800usb_config_channel(rt2x00dev, libconf->conf,
-					 &libconf->rf, &libconf->channel);
-	if (flags & IEEE80211_CONF_CHANGE_POWER)
-		rt2800usb_config_txpower(rt2x00dev, libconf->conf->power_level);
-	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
-		rt2800usb_config_retry_limit(rt2x00dev, libconf);
-	if (flags & IEEE80211_CONF_CHANGE_PS)
-		rt2800usb_config_ps(rt2x00dev, libconf);
-}
-
-/*
- * Link tuning
- */
-static void rt2800usb_link_stats(struct rt2x00_dev *rt2x00dev,
-				 struct link_qual *qual)
-{
-	u32 reg;
-
-	/*
-	 * Update FCS error count from register.
-	 */
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
-}
-
-static u8 rt2800usb_get_default_vgc(struct rt2x00_dev *rt2x00dev)
-{
-	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ) {
-		if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION)
-			return 0x1c + (2 * rt2x00dev->lna_gain);
-		else
-			return 0x2e + rt2x00dev->lna_gain;
-	}
-
-	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
-		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
-	else
-		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
-}
-
-static inline void rt2800usb_set_vgc(struct rt2x00_dev *rt2x00dev,
-				     struct link_qual *qual, u8 vgc_level)
-{
-	if (qual->vgc_level != vgc_level) {
-		rt2800usb_bbp_write(rt2x00dev, 66, vgc_level);
-		qual->vgc_level = vgc_level;
-		qual->vgc_level_reg = vgc_level;
-	}
-}
-
-static void rt2800usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
-				  struct link_qual *qual)
-{
-	rt2800usb_set_vgc(rt2x00dev, qual,
-			  rt2800usb_get_default_vgc(rt2x00dev));
-}
-
-static void rt2800usb_link_tuner(struct rt2x00_dev *rt2x00dev,
-				 struct link_qual *qual, const u32 count)
-{
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
-		return;
-
-	/*
-	 * When RSSI is better then -80 increase VGC level with 0x10
-	 */
-	rt2800usb_set_vgc(rt2x00dev, qual,
-			  rt2800usb_get_default_vgc(rt2x00dev) +
-			  ((qual->rssi > -80) * 0x10));
-}
-
-/*
  * Firmware functions
  */
 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
@@ -1172,7 +157,7 @@
 	 * Wait for stable hardware.
 	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+		rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 		if (reg && reg != ~0)
 			break;
 		msleep(1);
@@ -1192,8 +177,8 @@
 					    data + offset, length,
 					    REGISTER_TIMEOUT32(length));
 
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
 
 	/*
 	 * Send firmware request to device to load firmware,
@@ -1208,18 +193,18 @@
 	}
 
 	msleep(10);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 
 	/*
 	 * Send signal to firmware during boot time.
 	 */
-	rt2800usb_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
 
 	if ((chipset == 0x3070) ||
 	    (chipset == 0x3071) ||
 	    (chipset == 0x3572)) {
 		udelay(200);
-		rt2800usb_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0);
 		udelay(10);
 	}
 
@@ -1227,7 +212,7 @@
 	 * Wait for device to stabilize.
 	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
 		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
 			break;
 		msleep(1);
@@ -1241,536 +226,14 @@
 	/*
 	 * Initialize firmware.
 	 */
-	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
 	msleep(1);
 
 	return 0;
 }
 
 /*
- * Initialization functions.
- */
-static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	unsigned int i;
-
-	/*
-	 * Wait untill BBP and RF are ready.
-	 */
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
-		if (reg && reg != ~0)
-			break;
-		msleep(1);
-	}
-
-	if (i == REGISTER_BUSY_COUNT) {
-		ERROR(rt2x00dev, "Unstable hardware.\n");
-		return -EBUSY;
-	}
-
-	rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
-	rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
-
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-
-	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
-
-	rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
-				    USB_MODE_RESET, REGISTER_TIMEOUT);
-
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
-	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
-	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-	rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
-
-	rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-	rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
-
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
-
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00000000);
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
-	} else {
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
-		rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
-	}
-
-	rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
-	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
-	rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
-	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-	rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
-	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
-	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
-		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
-	else
-		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
-	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
-	rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
-
-	rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
-	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-	rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
-
-	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 3);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
-	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
-	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-	rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
-
-	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
-			   IEEE80211_MAX_RTS_THRESHOLD);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
-	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
-	rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
-
-	/*
-	 * ASIC will keep garbage value after boot, clear encryption keys.
-	 */
-	for (i = 0; i < 4; i++)
-		rt2x00usb_register_write(rt2x00dev,
-					 SHARED_KEY_MODE_ENTRY(i), 0);
-
-	for (i = 0; i < 256; i++) {
-		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
-		rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
-					      wcid, sizeof(wcid));
-
-		rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
-		rt2x00usb_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
-	}
-
-	/*
-	 * Clear all beacons
-	 * For the Beacon base registers we only need to clear
-	 * the first byte since that byte contains the VALID and OWNER
-	 * bits which (when set to 0) will invalidate the entire beacon.
-	 */
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-	rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-
-	rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
-	rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
-	rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
-	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
-	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
-	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
-	rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
-
-	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
-	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
-
-	rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
-	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
-	rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
-
-	/*
-	 * We must clear the error counters.
-	 * These registers are cleared on read,
-	 * so we may pass a useless variable to store the value.
-	 */
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
-	rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
-	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
-	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
-	rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
-
-	return 0;
-}
-
-static int rt2800usb_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u32 reg;
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
-		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
-			return 0;
-
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
-	return -EACCES;
-}
-
-static int rt2800usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u8 value;
-
-	/*
-	 * BBP was enabled after firmware was loaded,
-	 * but we need to reactivate it now.
-	 */
-	rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-	msleep(1);
-
-	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2800usb_bbp_read(rt2x00dev, 0, &value);
-		if ((value != 0xff) && (value != 0x00))
-			return 0;
-		udelay(REGISTER_BUSY_DELAY);
-	}
-
-	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
-	return -EACCES;
-}
-
-static int rt2800usb_init_bbp(struct rt2x00_dev *rt2x00dev)
-{
-	unsigned int i;
-	u16 eeprom;
-	u8 reg_id;
-	u8 value;
-
-	if (unlikely(rt2800usb_wait_bbp_rf_ready(rt2x00dev) ||
-		     rt2800usb_wait_bbp_ready(rt2x00dev)))
-		return -EACCES;
-
-	rt2800usb_bbp_write(rt2x00dev, 65, 0x2c);
-	rt2800usb_bbp_write(rt2x00dev, 66, 0x38);
-	rt2800usb_bbp_write(rt2x00dev, 69, 0x12);
-	rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-	rt2800usb_bbp_write(rt2x00dev, 73, 0x10);
-	rt2800usb_bbp_write(rt2x00dev, 81, 0x37);
-	rt2800usb_bbp_write(rt2x00dev, 82, 0x62);
-	rt2800usb_bbp_write(rt2x00dev, 83, 0x6a);
-	rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
-	rt2800usb_bbp_write(rt2x00dev, 86, 0x00);
-	rt2800usb_bbp_write(rt2x00dev, 91, 0x04);
-	rt2800usb_bbp_write(rt2x00dev, 92, 0x00);
-	rt2800usb_bbp_write(rt2x00dev, 103, 0x00);
-	rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
-		rt2800usb_bbp_write(rt2x00dev, 69, 0x16);
-		rt2800usb_bbp_write(rt2x00dev, 73, 0x12);
-	}
-
-	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) {
-		rt2800usb_bbp_write(rt2x00dev, 84, 0x19);
-	}
-
-	if (rt2x00_rev(&rt2x00dev->chip) == RT3070_VERSION) {
-		rt2800usb_bbp_write(rt2x00dev, 70, 0x0a);
-		rt2800usb_bbp_write(rt2x00dev, 84, 0x99);
-		rt2800usb_bbp_write(rt2x00dev, 105, 0x05);
-	}
-
-	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
-
-		if (eeprom != 0xffff && eeprom != 0x0000) {
-			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
-			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
-			rt2800usb_bbp_write(rt2x00dev, reg_id, value);
-		}
-	}
-
-	return 0;
-}
-
-static u8 rt2800usb_init_rx_filter(struct rt2x00_dev *rt2x00dev,
-				   bool bw40, u8 rfcsr24, u8 filter_target)
-{
-	unsigned int i;
-	u8 bbp;
-	u8 rfcsr;
-	u8 passband;
-	u8 stopband;
-	u8 overtuned = 0;
-
-	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-
-	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
-	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
-	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-	/*
-	 * Set power & frequency of passband test tone
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 24, 0);
-
-	for (i = 0; i < 100; i++) {
-		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
-		msleep(1);
-
-		rt2800usb_bbp_read(rt2x00dev, 55, &passband);
-		if (passband)
-			break;
-	}
-
-	/*
-	 * Set power & frequency of stopband test tone
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 24, 0x06);
-
-	for (i = 0; i < 100; i++) {
-		rt2800usb_bbp_write(rt2x00dev, 25, 0x90);
-		msleep(1);
-
-		rt2800usb_bbp_read(rt2x00dev, 55, &stopband);
-
-		if ((passband - stopband) <= filter_target) {
-			rfcsr24++;
-			overtuned += ((passband - stopband) == filter_target);
-		} else
-			break;
-
-		rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-	}
-
-	rfcsr24 -= !!overtuned;
-
-	rt2800usb_rfcsr_write(rt2x00dev, 24, rfcsr24);
-	return rfcsr24;
-}
-
-static int rt2800usb_init_rfcsr(struct rt2x00_dev *rt2x00dev)
-{
-	u8 rfcsr;
-	u8 bbp;
-
-	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
-		return 0;
-
-	/*
-	 * Init RF calibration.
-	 */
-	rt2800usb_rfcsr_read(rt2x00dev, 30, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
-	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
-	msleep(1);
-	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
-	rt2800usb_rfcsr_write(rt2x00dev, 30, rfcsr);
-
-	rt2800usb_rfcsr_write(rt2x00dev, 4, 0x40);
-	rt2800usb_rfcsr_write(rt2x00dev, 5, 0x03);
-	rt2800usb_rfcsr_write(rt2x00dev, 6, 0x02);
-	rt2800usb_rfcsr_write(rt2x00dev, 7, 0x70);
-	rt2800usb_rfcsr_write(rt2x00dev, 9, 0x0f);
-	rt2800usb_rfcsr_write(rt2x00dev, 10, 0x71);
-	rt2800usb_rfcsr_write(rt2x00dev, 11, 0x21);
-	rt2800usb_rfcsr_write(rt2x00dev, 12, 0x7b);
-	rt2800usb_rfcsr_write(rt2x00dev, 14, 0x90);
-	rt2800usb_rfcsr_write(rt2x00dev, 15, 0x58);
-	rt2800usb_rfcsr_write(rt2x00dev, 16, 0xb3);
-	rt2800usb_rfcsr_write(rt2x00dev, 17, 0x92);
-	rt2800usb_rfcsr_write(rt2x00dev, 18, 0x2c);
-	rt2800usb_rfcsr_write(rt2x00dev, 19, 0x02);
-	rt2800usb_rfcsr_write(rt2x00dev, 20, 0xba);
-	rt2800usb_rfcsr_write(rt2x00dev, 21, 0xdb);
-	rt2800usb_rfcsr_write(rt2x00dev, 24, 0x16);
-	rt2800usb_rfcsr_write(rt2x00dev, 25, 0x01);
-	rt2800usb_rfcsr_write(rt2x00dev, 27, 0x03);
-	rt2800usb_rfcsr_write(rt2x00dev, 29, 0x1f);
-
-	/*
-	 * Set RX Filter calibration for 20MHz and 40MHz
-	 */
-	rt2x00dev->calibration[0] =
-	    rt2800usb_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
-	rt2x00dev->calibration[1] =
-	    rt2800usb_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
-
-	/*
-	 * Set back to initial state
-	 */
-	rt2800usb_bbp_write(rt2x00dev, 24, 0);
-
-	rt2800usb_rfcsr_read(rt2x00dev, 22, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
-	rt2800usb_rfcsr_write(rt2x00dev, 22, rfcsr);
-
-	/*
-	 * set BBP back to BW20
-	 */
-	rt2800usb_bbp_read(rt2x00dev, 4, &bbp);
-	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
-	rt2800usb_bbp_write(rt2x00dev, 4, bbp);
-
-	return 0;
-}
-
-/*
  * Device state switch handlers.
  */
 static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
@@ -1778,11 +241,11 @@
 {
 	u32 reg;
 
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
 			   (state == STATE_RADIO_RX_ON) ||
 			   (state == STATE_RADIO_RX_ON_LINK));
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 }
 
 static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
@@ -1791,7 +254,7 @@
 	u32 reg;
 
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-		rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
 		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
 			return 0;
@@ -1812,25 +275,25 @@
 	 * Initialize all registers.
 	 */
 	if (unlikely(rt2800usb_wait_wpdma_ready(rt2x00dev) ||
-		     rt2800usb_init_registers(rt2x00dev) ||
-		     rt2800usb_init_bbp(rt2x00dev) ||
-		     rt2800usb_init_rfcsr(rt2x00dev)))
+		     rt2800_init_registers(rt2x00dev) ||
+		     rt2800_init_bbp(rt2x00dev) ||
+		     rt2800_init_rfcsr(rt2x00dev)))
 		return -EIO;
 
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
 	udelay(50);
 
-	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
 
-	rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
+	rt2800_register_read(rt2x00dev, USB_DMA_CFG, &reg);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
 	/* Don't use bulk in aggregation when working with USB 1.1 */
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
@@ -1844,26 +307,26 @@
 			   ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
-	rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
+	rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
 
-	rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
 	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
 
 	/*
 	 * Initialize LED control
 	 */
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800usb_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
 			      word & 0xff, (word >> 8) & 0xff);
 
 	return 0;
@@ -1873,14 +336,14 @@
 {
 	u32 reg;
 
-	rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
 	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-	rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+	rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 
-	rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-	rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-	rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0);
 
 	/* Wait for DMA, ignore error */
 	rt2800usb_wait_wpdma_ready(rt2x00dev);
@@ -1892,9 +355,9 @@
 			       enum dev_state state)
 {
 	if (state == STATE_AWAKE)
-		rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
 	else
-		rt2800usb_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
 
 	return 0;
 }
@@ -2048,9 +511,9 @@
 	 * Disable beaconing while we are reloading the beacon data,
 	 * otherwise we might be sending out invalid data.
 	 */
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-	rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
 	/*
 	 * Write entire beacon with descriptor to register.
@@ -2093,12 +556,12 @@
 		return;
 	}
 
-	rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
 	if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
 		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-		rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 	}
 }
 
@@ -2124,7 +587,7 @@
 	 */
 	memcpy(skbdesc->desc, rxd, skbdesc->desc_len);
 	rxd = (__le32 *)skbdesc->desc;
-	rxwi = &rxd[RXD_DESC_SIZE / sizeof(__le32)];
+	rxwi = &rxd[RXINFO_DESC_SIZE / sizeof(__le32)];
 
 	/*
 	 * It is now safe to read the descriptor on all architectures.
@@ -2135,16 +598,16 @@
 	rt2x00_desc_read(rxwi, 2, &rxwi2);
 	rt2x00_desc_read(rxwi, 3, &rxwi3);
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_CRC_ERROR))
+	if (rt2x00_get_field32(rxd0, RXINFO_W0_CRC_ERROR))
 		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
 
 	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
 		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
 		rxdesc->cipher_status =
-		    rt2x00_get_field32(rxd0, RXD_W0_CIPHER_ERROR);
+		    rt2x00_get_field32(rxd0, RXINFO_W0_CIPHER_ERROR);
 	}
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_DECRYPTED)) {
+	if (rt2x00_get_field32(rxd0, RXINFO_W0_DECRYPTED)) {
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
 		 * decryption. Unfortunately the descriptor doesn't contain
@@ -2159,10 +622,10 @@
 			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
 	}
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_MY_BSS))
+	if (rt2x00_get_field32(rxd0, RXINFO_W0_MY_BSS))
 		rxdesc->dev_flags |= RXDONE_MY_BSS;
 
-	if (rt2x00_get_field32(rxd0, RXD_W0_L2PAD)) {
+	if (rt2x00_get_field32(rxd0, RXINFO_W0_L2PAD)) {
 		rxdesc->dev_flags |= RXDONE_L2PAD;
 		skbdesc->flags |= SKBDESC_L2_PADDED;
 	}
@@ -2208,402 +671,33 @@
  */
 static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 {
-	u16 word;
-	u8 *mac;
-	u8 default_lna_gain;
+	if (rt2800_efuse_detect(rt2x00dev))
+		rt2800_read_eeprom_efuse(rt2x00dev);
+	else
+		rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
+				      EEPROM_SIZE);
 
-	rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
-
-	/*
-	 * Start validation of the data that has been read.
-	 */
-	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
-	if (!is_valid_ether_addr(mac)) {
-		random_ether_addr(mac);
-		EEPROM(rt2x00dev, "MAC: %pM\n", mac);
-	}
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
-	if (word == 0xffff) {
-		rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-		rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
-		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
-	} else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
-		/*
-		 * There is a max of 2 RX streams for RT2870 series
-		 */
-		if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
-			rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
-	}
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
-	if (word == 0xffff) {
-		rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
-		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
-	}
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
-	if ((word & 0x00ff) == 0x00ff) {
-		rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
-		rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
-				   LED_MODE_TXRX_ACTIVITY);
-		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
-		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
-	}
-
-	/*
-	 * During the LNA validation we are going to use
-	 * lna0 as correct value. Note that EEPROM_LNA
-	 * is never validated.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
-	default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
-	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
-		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
-	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
-		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
-	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
-	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
-		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
-	if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
-	    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
-		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
-				   default_lna_gain);
-	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
-	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
-		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
-	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
-		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
-	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
-	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
-		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
-	if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
-	    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
-		rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
-				   default_lna_gain);
-	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
-
-	return 0;
+	return rt2800_validate_eeprom(rt2x00dev);
 }
 
-static int rt2800usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
-{
-	u32 reg;
-	u16 value;
-	u16 eeprom;
+static const struct rt2800_ops rt2800usb_rt2800_ops = {
+	.register_read		= rt2x00usb_register_read,
+	.register_read_lock	= rt2x00usb_register_read_lock,
+	.register_write		= rt2x00usb_register_write,
+	.register_write_lock	= rt2x00usb_register_write_lock,
 
-	/*
-	 * Read EEPROM word for configuration.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+	.register_multiread	= rt2x00usb_register_multiread,
+	.register_multiwrite	= rt2x00usb_register_multiwrite,
 
-	/*
-	 * Identify RF chipset.
-	 */
-	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
-	rt2x00_set_chip(rt2x00dev, RT2870, value, reg);
-
-	/*
-	 * The check for rt2860 is not a typo, some rt2870 hardware
-	 * identifies itself as rt2860 in the CSR register.
-	 */
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28600000) &&
-	    !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28700000) &&
-	    !rt2x00_check_rev(&rt2x00dev->chip, 0xfff00000, 0x28800000) &&
-	    !rt2x00_check_rev(&rt2x00dev->chip, 0xffff0000, 0x30700000)) {
-		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
-		return -ENODEV;
-	}
-
-	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
-	    !rt2x00_rf(&rt2x00dev->chip, RF2020)) {
-		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
-		return -ENODEV;
-	}
-
-	/*
-	 * Identify default antenna configuration.
-	 */
-	rt2x00dev->default_ant.tx =
-	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
-	rt2x00dev->default_ant.rx =
-	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
-
-	/*
-	 * Read frequency offset and RF programming sequence.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
-	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
-
-	/*
-	 * Read external LNA informations.
-	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
-		__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
-		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
-
-	/*
-	 * Detect if this device has an hardware controlled radio.
-	 */
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
-		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
-
-	/*
-	 * Store led settings, for correct led behaviour.
-	 */
-#ifdef CONFIG_RT2X00_LIB_LEDS
-	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
-	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
-	rt2800usb_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ,
-			   &rt2x00dev->led_mcu_reg);
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
-	return 0;
-}
-
-/*
- * RF value list for rt2870
- * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
- */
-static const struct rf_channel rf_vals[] = {
-	{ 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
-	{ 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
-	{ 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
-	{ 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
-	{ 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
-	{ 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
-	{ 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
-	{ 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
-	{ 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
-	{ 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
-	{ 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
-	{ 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
-	{ 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
-	{ 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
-
-	/* 802.11 UNI / HyperLan 2 */
-	{ 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
-	{ 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
-	{ 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
-	{ 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
-	{ 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
-	{ 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
-	{ 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
-	{ 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
-	{ 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
-	{ 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
-	{ 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
-	{ 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
-
-	/* 802.11 HyperLan 2 */
-	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
-	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
-	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
-	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
-	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
-	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
-	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
-	{ 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
-	{ 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
-	{ 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
-	{ 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
-	{ 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
-	{ 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
-	{ 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
-	{ 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
-	{ 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
-
-	/* 802.11 UNII */
-	{ 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
-	{ 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
-	{ 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
-	{ 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
-	{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
-	{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
-	{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
-	{ 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
-	{ 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
-	{ 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
-	{ 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
-
-	/* 802.11 Japan */
-	{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
-	{ 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
-	{ 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
-	{ 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
-	{ 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
-	{ 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
-	{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+	.regbusy_read		= rt2x00usb_regbusy_read,
 };
 
-/*
- * RF value list for rt3070
- * Supports: 2.4 GHz
- */
-static const struct rf_channel rf_vals_3070[] = {
-	{1,  241, 2, 2 },
-	{2,  241, 2, 7 },
-	{3,  242, 2, 2 },
-	{4,  242, 2, 7 },
-	{5,  243, 2, 2 },
-	{6,  243, 2, 7 },
-	{7,  244, 2, 2 },
-	{8,  244, 2, 7 },
-	{9,  245, 2, 2 },
-	{10, 245, 2, 7 },
-	{11, 246, 2, 2 },
-	{12, 246, 2, 7 },
-	{13, 247, 2, 2 },
-	{14, 248, 2, 4 },
-};
-
-static int rt2800usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
-{
-	struct hw_mode_spec *spec = &rt2x00dev->spec;
-	struct channel_info *info;
-	char *tx_power1;
-	char *tx_power2;
-	unsigned int i;
-	u16 eeprom;
-
-	/*
-	 * Initialize all hw fields.
-	 */
-	rt2x00dev->hw->flags =
-	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-	    IEEE80211_HW_SIGNAL_DBM |
-	    IEEE80211_HW_SUPPORTS_PS |
-	    IEEE80211_HW_PS_NULLFUNC_STACK;
-	rt2x00dev->hw->extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
-
-	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
-	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
-				rt2x00_eeprom_addr(rt2x00dev,
-						   EEPROM_MAC_ADDR_0));
-
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-
-	/*
-	 * Initialize HT information.
-	 */
-	spec->ht.ht_supported = true;
-	spec->ht.cap =
-	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
-	    IEEE80211_HT_CAP_GRN_FLD |
-	    IEEE80211_HT_CAP_SGI_20 |
-	    IEEE80211_HT_CAP_SGI_40 |
-	    IEEE80211_HT_CAP_TX_STBC |
-	    IEEE80211_HT_CAP_RX_STBC |
-	    IEEE80211_HT_CAP_PSMP_SUPPORT;
-	spec->ht.ampdu_factor = 3;
-	spec->ht.ampdu_density = 4;
-	spec->ht.mcs.tx_params =
-	    IEEE80211_HT_MCS_TX_DEFINED |
-	    IEEE80211_HT_MCS_TX_RX_DIFF |
-	    ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
-		IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
-
-	switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
-	case 3:
-		spec->ht.mcs.rx_mask[2] = 0xff;
-	case 2:
-		spec->ht.mcs.rx_mask[1] = 0xff;
-	case 1:
-		spec->ht.mcs.rx_mask[0] = 0xff;
-		spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
-		break;
-	}
-
-	/*
-	 * Initialize hw_mode information.
-	 */
-	spec->supported_bands = SUPPORT_BAND_2GHZ;
-	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
-
-	if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
-	    rt2x00_rf(&rt2x00dev->chip, RF2720)) {
-		spec->num_channels = 14;
-		spec->channels = rf_vals;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
-		   rt2x00_rf(&rt2x00dev->chip, RF2750)) {
-		spec->supported_bands |= SUPPORT_BAND_5GHZ;
-		spec->num_channels = ARRAY_SIZE(rf_vals);
-		spec->channels = rf_vals;
-	} else if (rt2x00_rf(&rt2x00dev->chip, RF3020) ||
-		   rt2x00_rf(&rt2x00dev->chip, RF2020)) {
-		spec->num_channels = ARRAY_SIZE(rf_vals_3070);
-		spec->channels = rf_vals_3070;
-	}
-
-	/*
-	 * Create channel information array
-	 */
-	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	spec->channels_info = info;
-
-	tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
-	tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
-
-	for (i = 0; i < 14; i++) {
-		info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
-		info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
-	}
-
-	if (spec->num_channels > 14) {
-		tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
-		tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
-
-		for (i = 14; i < spec->num_channels; i++) {
-			info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
-			info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
-		}
-	}
-
-	return 0;
-}
-
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
+	rt2x00dev->priv = (void *)&rt2800usb_rt2800_ops;
+
 	/*
 	 * Allocate eeprom data.
 	 */
@@ -2611,14 +705,14 @@
 	if (retval)
 		return retval;
 
-	retval = rt2800usb_init_eeprom(rt2x00dev);
+	retval = rt2800_init_eeprom(rt2x00dev);
 	if (retval)
 		return retval;
 
 	/*
 	 * Initialize hw specifications.
 	 */
-	retval = rt2800usb_probe_hw_mode(rt2x00dev);
+	retval = rt2800_probe_hw_mode(rt2x00dev);
 	if (retval)
 		return retval;
 
@@ -2645,162 +739,6 @@
 	return 0;
 }
 
-/*
- * IEEE80211 stack callback functions.
- */
-static void rt2800usb_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
-				   u32 *iv32, u16 *iv16)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct mac_iveiv_entry iveiv_entry;
-	u32 offset;
-
-	offset = MAC_IVEIV_ENTRY(hw_key_idx);
-	rt2x00usb_register_multiread(rt2x00dev, offset,
-				      &iveiv_entry, sizeof(iveiv_entry));
-
-	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
-	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
-}
-
-static int rt2800usb_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u32 reg;
-	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
-
-	rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
-	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
-	rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
-	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
-	rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
-
-	return 0;
-}
-
-static int rt2800usb_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
-			     const struct ieee80211_tx_queue_params *params)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct data_queue *queue;
-	struct rt2x00_field32 field;
-	int retval;
-	u32 reg;
-	u32 offset;
-
-	/*
-	 * First pass the configuration through rt2x00lib, that will
-	 * update the queue settings and validate the input. After that
-	 * we are free to update the registers based on the value
-	 * in the queue parameter.
-	 */
-	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
-	if (retval)
-		return retval;
-
-	/*
-	 * We only need to perform additional register initialization
-	 * for WMM queues/
-	 */
-	if (queue_idx >= 4)
-		return 0;
-
-	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
-
-	/* Update WMM TXOP register */
-	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
-	field.bit_offset = (queue_idx & 1) * 16;
-	field.bit_mask = 0xffff << field.bit_offset;
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, field, queue->txop);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	/* Update WMM registers */
-	field.bit_offset = queue_idx * 4;
-	field.bit_mask = 0xf << field.bit_offset;
-
-	rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->aifs);
-	rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->cw_min);
-	rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
-
-	rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
-	rt2x00_set_field32(&reg, field, queue->cw_max);
-	rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
-
-	/* Update EDCA registers */
-	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
-
-	rt2x00usb_register_read(rt2x00dev, offset, &reg);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
-	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-	rt2x00usb_register_write(rt2x00dev, offset, reg);
-
-	return 0;
-}
-
-static u64 rt2800usb_get_tsf(struct ieee80211_hw *hw)
-{
-	struct rt2x00_dev *rt2x00dev = hw->priv;
-	u64 tsf;
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
-	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-	rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
-	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
-
-	return tsf;
-}
-
-static const struct ieee80211_ops rt2800usb_mac80211_ops = {
-	.tx			= rt2x00mac_tx,
-	.start			= rt2x00mac_start,
-	.stop			= rt2x00mac_stop,
-	.add_interface		= rt2x00mac_add_interface,
-	.remove_interface	= rt2x00mac_remove_interface,
-	.config			= rt2x00mac_config,
-	.configure_filter	= rt2x00mac_configure_filter,
-	.set_tim		= rt2x00mac_set_tim,
-	.set_key		= rt2x00mac_set_key,
-	.get_stats		= rt2x00mac_get_stats,
-	.get_tkip_seq		= rt2800usb_get_tkip_seq,
-	.set_rts_threshold	= rt2800usb_set_rts_threshold,
-	.bss_info_changed	= rt2x00mac_bss_info_changed,
-	.conf_tx		= rt2800usb_conf_tx,
-	.get_tx_stats		= rt2x00mac_get_tx_stats,
-	.get_tsf		= rt2800usb_get_tsf,
-	.rfkill_poll		= rt2x00mac_rfkill_poll,
-};
-
 static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.probe_hw		= rt2800usb_probe_hw,
 	.get_firmware_name	= rt2800usb_get_firmware_name,
@@ -2810,10 +748,10 @@
 	.uninitialize		= rt2x00usb_uninitialize,
 	.clear_entry		= rt2x00usb_clear_entry,
 	.set_device_state	= rt2800usb_set_device_state,
-	.rfkill_poll		= rt2800usb_rfkill_poll,
-	.link_stats		= rt2800usb_link_stats,
-	.reset_tuner		= rt2800usb_reset_tuner,
-	.link_tuner		= rt2800usb_link_tuner,
+	.rfkill_poll		= rt2800_rfkill_poll,
+	.link_stats		= rt2800_link_stats,
+	.reset_tuner		= rt2800_reset_tuner,
+	.link_tuner		= rt2800_link_tuner,
 	.write_tx_desc		= rt2800usb_write_tx_desc,
 	.write_tx_data		= rt2x00usb_write_tx_data,
 	.write_beacon		= rt2800usb_write_beacon,
@@ -2821,19 +759,19 @@
 	.kick_tx_queue		= rt2800usb_kick_tx_queue,
 	.kill_tx_queue		= rt2x00usb_kill_tx_queue,
 	.fill_rxdone		= rt2800usb_fill_rxdone,
-	.config_shared_key	= rt2800usb_config_shared_key,
-	.config_pairwise_key	= rt2800usb_config_pairwise_key,
-	.config_filter		= rt2800usb_config_filter,
-	.config_intf		= rt2800usb_config_intf,
-	.config_erp		= rt2800usb_config_erp,
-	.config_ant		= rt2800usb_config_ant,
-	.config			= rt2800usb_config,
+	.config_shared_key	= rt2800_config_shared_key,
+	.config_pairwise_key	= rt2800_config_pairwise_key,
+	.config_filter		= rt2800_config_filter,
+	.config_intf		= rt2800_config_intf,
+	.config_erp		= rt2800_config_erp,
+	.config_ant		= rt2800_config_ant,
+	.config			= rt2800_config,
 };
 
 static const struct data_queue_desc rt2800usb_queue_rx = {
 	.entry_num		= RX_ENTRIES,
 	.data_size		= AGGREGATION_SIZE,
-	.desc_size		= RXD_DESC_SIZE + RXWI_DESC_SIZE,
+	.desc_size		= RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
@@ -2852,19 +790,20 @@
 };
 
 static const struct rt2x00_ops rt2800usb_ops = {
-	.name		= KBUILD_MODNAME,
-	.max_sta_intf	= 1,
-	.max_ap_intf	= 8,
-	.eeprom_size	= EEPROM_SIZE,
-	.rf_size	= RF_SIZE,
-	.tx_queues	= NUM_TX_QUEUES,
-	.rx		= &rt2800usb_queue_rx,
-	.tx		= &rt2800usb_queue_tx,
-	.bcn		= &rt2800usb_queue_bcn,
-	.lib		= &rt2800usb_rt2x00_ops,
-	.hw		= &rt2800usb_mac80211_ops,
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 8,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
+	.rx			= &rt2800usb_queue_rx,
+	.tx			= &rt2800usb_queue_tx,
+	.bcn			= &rt2800usb_queue_bcn,
+	.lib			= &rt2800usb_rt2x00_ops,
+	.hw			= &rt2800_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt2800usb_rt2x00debug,
+	.debugfs		= &rt2800_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
@@ -2886,17 +825,23 @@
 	{ USB_DEVICE(0x0e0b, 0x9041), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Amit */
 	{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Askey */
+	{ USB_DEVICE(0x1690, 0x0740), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1690, 0x0744), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0930, 0x0a07), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* ASUS */
 	{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1760), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1761), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* AzureWave */
 	{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Belkin */
 	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -2905,6 +850,8 @@
 	/* Buffalo */
 	{ USB_DEVICE(0x0411, 0x00e8), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0411, 0x012e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Cisco */
+	{ USB_DEVICE(0x167b, 0x4001), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -2920,6 +867,8 @@
 	{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07aa, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x18c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* D-Link */
@@ -2931,18 +880,24 @@
 	{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Edimax */
 	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Encore */
 	{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* EnGenius */
 	{ USB_DEVICE(0X1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9801), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Gemtek */
 	{ USB_DEVICE(0x15a9, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -2956,7 +911,10 @@
 	{ USB_DEVICE(0x0e66, 0x0009), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0e66, 0x000b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* I-O DATA */
+	{ USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* LevelOne */
 	{ USB_DEVICE(0x1740, 0x0605), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x0615), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -2971,8 +929,18 @@
 	/* Motorola */
 	{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* MSI */
+	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Ovislink */
 	{ USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Para */
+	{ USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Pegatron */
 	{ USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -2988,8 +956,6 @@
 	/* Quanta */
 	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Ralink */
-	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -3013,7 +979,12 @@
 	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x004a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x004d), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* SMC */
 	{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -3022,6 +993,8 @@
 	{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sparklan */
@@ -3039,6 +1012,7 @@
 	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zyxel */
 	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 4d9991c..1e4340a 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -1,5 +1,9 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de>
+	Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+	Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com>
+	Copyright (C) 2009 Axel Kollhofer <rain_maker@root-forum.org>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -28,288 +32,10 @@
 #define RT2800USB_H
 
 /*
- * RF chip defines.
- *
- * RF2820 2.4G 2T3R
- * RF2850 2.4G/5G 2T3R
- * RF2720 2.4G 1T2R
- * RF2750 2.4G/5G 1T2R
- * RF3020 2.4G 1T1R
- * RF2020 2.4G B/G
- * RF3021 2.4G 1T2R
- * RF3022 2.4G 2T2R
- * RF3052 2.4G 2T2R
- */
-#define RF2820				0x0001
-#define RF2850				0x0002
-#define RF2720				0x0003
-#define RF2750				0x0004
-#define RF3020				0x0005
-#define RF2020				0x0006
-#define RF3021				0x0007
-#define RF3022				0x0008
-#define RF3052				0x0009
-
-/*
- * RT2870 version
- */
-#define RT2860C_VERSION			0x28600100
-#define RT2860D_VERSION			0x28600101
-#define RT2880E_VERSION			0x28720200
-#define RT2883_VERSION			0x28830300
-#define RT3070_VERSION			0x30700200
-
-/*
- * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
- */
-#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
-
-/*
- * Register layout information.
- */
-#define CSR_REG_BASE			0x1000
-#define CSR_REG_SIZE			0x0800
-#define EEPROM_BASE			0x0000
-#define EEPROM_SIZE			0x0110
-#define BBP_BASE			0x0000
-#define BBP_SIZE			0x0080
-#define RF_BASE				0x0004
-#define RF_SIZE				0x0010
-
-/*
- * Number of TX queues.
- */
-#define NUM_TX_QUEUES			4
-
-/*
  * USB registers.
  */
 
 /*
- * HOST-MCU shared memory
- */
-#define HOST_CMD_CSR			0x0404
-#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
-
-/*
- * INT_SOURCE_CSR: Interrupt source register.
- * Write one to clear corresponding bit.
- * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
- */
-#define INT_SOURCE_CSR			0x0200
-#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
-#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
-#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
-#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
-#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
-#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
-#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
-#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
-#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
-#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
-#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
-#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
-#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
-#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
-#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
-#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
-#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
-#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
-
-/*
- * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
- */
-#define INT_MASK_CSR			0x0204
-#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
-#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
-#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
-#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
-#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
-#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
-#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
-#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
-#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
-#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
-#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
-#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
-#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
-#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
-#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
-#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
-#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
-#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
-
-/*
- * WPDMA_GLO_CFG
- */
-#define WPDMA_GLO_CFG 			0x0208
-#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
-#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
-#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
-#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
-#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
-#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
-#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
-#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
-#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
-
-/*
- * WPDMA_RST_IDX
- */
-#define WPDMA_RST_IDX 			0x020c
-#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
-#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
-#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
-#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
-#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
-#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
-#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
-
-/*
- * DELAY_INT_CFG
- */
-#define DELAY_INT_CFG			0x0210
-#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
-#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
-#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
-#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
-#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
-#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
-
-/*
- * WMM_AIFSN_CFG: Aifsn for each EDCA AC
- * AIFSN0: AC_BE
- * AIFSN1: AC_BK
- * AIFSN1: AC_VI
- * AIFSN1: AC_VO
- */
-#define WMM_AIFSN_CFG			0x0214
-#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
-#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
-#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
-#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
-
-/*
- * WMM_CWMIN_CSR: CWmin for each EDCA AC
- * CWMIN0: AC_BE
- * CWMIN1: AC_BK
- * CWMIN1: AC_VI
- * CWMIN1: AC_VO
- */
-#define WMM_CWMIN_CFG			0x0218
-#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
-#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
-#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
-#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
-
-/*
- * WMM_CWMAX_CSR: CWmax for each EDCA AC
- * CWMAX0: AC_BE
- * CWMAX1: AC_BK
- * CWMAX1: AC_VI
- * CWMAX1: AC_VO
- */
-#define WMM_CWMAX_CFG			0x021c
-#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
-#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
-#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
-#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
-
-/*
- * AC_TXOP0: AC_BK/AC_BE TXOP register
- * AC0TXOP: AC_BK in unit of 32us
- * AC1TXOP: AC_BE in unit of 32us
- */
-#define WMM_TXOP0_CFG			0x0220
-#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
-#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
-
-/*
- * AC_TXOP1: AC_VO/AC_VI TXOP register
- * AC2TXOP: AC_VI in unit of 32us
- * AC3TXOP: AC_VO in unit of 32us
- */
-#define WMM_TXOP1_CFG			0x0224
-#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
-#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
-
-/*
- * GPIO_CTRL_CFG:
- */
-#define GPIO_CTRL_CFG			0x0228
-#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
-#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
-#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
-#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
-#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
-#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
-#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
-#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
-#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
-
-/*
- * MCU_CMD_CFG
- */
-#define MCU_CMD_CFG			0x022c
-
-/*
- * AC_BK register offsets
- */
-#define TX_BASE_PTR0			0x0230
-#define TX_MAX_CNT0			0x0234
-#define TX_CTX_IDX0			0x0238
-#define TX_DTX_IDX0			0x023c
-
-/*
- * AC_BE register offsets
- */
-#define TX_BASE_PTR1			0x0240
-#define TX_MAX_CNT1			0x0244
-#define TX_CTX_IDX1			0x0248
-#define TX_DTX_IDX1			0x024c
-
-/*
- * AC_VI register offsets
- */
-#define TX_BASE_PTR2			0x0250
-#define TX_MAX_CNT2			0x0254
-#define TX_CTX_IDX2			0x0258
-#define TX_DTX_IDX2			0x025c
-
-/*
- * AC_VO register offsets
- */
-#define TX_BASE_PTR3			0x0260
-#define TX_MAX_CNT3			0x0264
-#define TX_CTX_IDX3			0x0268
-#define TX_DTX_IDX3			0x026c
-
-/*
- * HCCA register offsets
- */
-#define TX_BASE_PTR4			0x0270
-#define TX_MAX_CNT4			0x0274
-#define TX_CTX_IDX4			0x0278
-#define TX_DTX_IDX4			0x027c
-
-/*
- * MGMT register offsets
- */
-#define TX_BASE_PTR5			0x0280
-#define TX_MAX_CNT5			0x0284
-#define TX_CTX_IDX5			0x0288
-#define TX_DTX_IDX5			0x028c
-
-/*
- * RX register offsets
- */
-#define RX_BASE_PTR			0x0290
-#define RX_MAX_CNT			0x0294
-#define RX_CRX_IDX			0x0298
-#define RX_DRX_IDX			0x029c
-
-/*
  * USB_DMA_CFG
  * RX_BULK_AGG_TIMEOUT: Rx Bulk Aggregation TimeOut in unit of 33ns.
  * RX_BULK_AGG_LIMIT: Rx Bulk Aggregation Limit in unit of 256 bytes.
@@ -343,1448 +69,16 @@
 #define USB_CYC_CFG_CLOCK_CYCLE		FIELD32(0x000000ff)
 
 /*
- * PBF_SYS_CTRL
- * HOST_RAM_WRITE: enable Host program ram write selection
- */
-#define PBF_SYS_CTRL			0x0400
-#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
-#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
-
-/*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
- */
-#define PBF_CFG				0x0408
-#define PBF_MAX_PCNT			0x040c
-#define PBF_CTRL			0x0410
-#define PBF_INT_STA			0x0414
-#define PBF_INT_ENA			0x0418
-
-/*
- * BCN_OFFSET0:
- */
-#define BCN_OFFSET0			0x042c
-#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
-#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
-#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
-#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
-
-/*
- * BCN_OFFSET1:
- */
-#define BCN_OFFSET1			0x0430
-#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
-#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
-#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
-#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
-
-/*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
- */
-#define TXRXQ_PCNT			0x0438
-#define PBF_DBG				0x043c
-
-/*
- * RF registers
- */
-#define	RF_CSR_CFG			0x0500
-#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
-#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
-#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
-#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
-
-/*
- * MAC Control/Status Registers(CSR).
- * Some values are set in TU, whereas 1 TU == 1024 us.
- */
-
-/*
- * MAC_CSR0: ASIC revision number.
- * ASIC_REV: 0
- * ASIC_VER: 2870
- */
-#define MAC_CSR0			0x1000
-#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
-#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
-
-/*
- * MAC_SYS_CTRL:
- */
-#define MAC_SYS_CTRL			0x1004
-#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
-#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
-#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
-#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
-#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
-#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
-#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
-#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
-
-/*
- * MAC_ADDR_DW0: STA MAC register 0
- */
-#define MAC_ADDR_DW0			0x1008
-#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
-#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
-#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
-#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
-
-/*
- * MAC_ADDR_DW1: STA MAC register 1
- * UNICAST_TO_ME_MASK:
- * Used to mask off bits from byte 5 of the MAC address
- * to determine the UNICAST_TO_ME bit for RX frames.
- * The full mask is complemented by BSS_ID_MASK:
- *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
- */
-#define MAC_ADDR_DW1			0x100c
-#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
-#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
-#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
-
-/*
- * MAC_BSSID_DW0: BSSID register 0
- */
-#define MAC_BSSID_DW0			0x1010
-#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
-#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
-#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
-#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
-
-/*
- * MAC_BSSID_DW1: BSSID register 1
- * BSS_ID_MASK:
- *     0: 1-BSSID mode (BSS index = 0)
- *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
- *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
- *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
- * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
- * BSSID. This will make sure that those bits will be ignored
- * when determining the MY_BSS of RX frames.
- */
-#define MAC_BSSID_DW1			0x1014
-#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
-#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
-#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
-#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
-
-/*
- * MAX_LEN_CFG: Maximum frame length register.
- * MAX_MPDU: rt2860b max 16k bytes
- * MAX_PSDU: Maximum PSDU length
- *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
- */
-#define MAX_LEN_CFG			0x1018
-#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
-#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
-#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
-#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
-
-/*
- * BBP_CSR_CFG: BBP serial control register
- * VALUE: Register value to program into BBP
- * REG_NUM: Selected BBP register
- * READ_CONTROL: 0 write BBP, 1 read BBP
- * BUSY: ASIC is busy executing BBP commands
- * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
- */
-#define BBP_CSR_CFG			0x101c
-#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
-#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
-#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
-#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
-#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
-#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
-
-/*
- * RF_CSR_CFG0: RF control register
- * REGID_AND_VALUE: Register value to program into RF
- * BITWIDTH: Selected RF register
- * STANDBYMODE: 0 high when standby, 1 low when standby
- * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
- * BUSY: ASIC is busy executing RF commands
- */
-#define RF_CSR_CFG0			0x1020
-#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
-#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
-#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
-#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
-#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
-#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
-
-/*
- * RF_CSR_CFG1: RF control register
- * REGID_AND_VALUE: Register value to program into RF
- * RFGAP: Gap between BB_CONTROL_RF and RF_LE
- *        0: 3 system clock cycle (37.5usec)
- *        1: 5 system clock cycle (62.5usec)
- */
-#define RF_CSR_CFG1			0x1024
-#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
-#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
-
-/*
- * RF_CSR_CFG2: RF control register
- * VALUE: Register value to program into RF
- * RFGAP: Gap between BB_CONTROL_RF and RF_LE
- *        0: 3 system clock cycle (37.5usec)
- *        1: 5 system clock cycle (62.5usec)
- */
-#define RF_CSR_CFG2			0x1028
-#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
-
-/*
- * LED_CFG: LED control
- * color LED's:
- *   0: off
- *   1: blinking upon TX2
- *   2: periodic slow blinking
- *   3: always on
- * LED polarity:
- *   0: active low
- *   1: active high
- */
-#define LED_CFG				0x102c
-#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
-#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
-#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
-#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
-#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
-#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
-#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
-
-/*
- * XIFS_TIME_CFG: MAC timing
- * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
- * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
- * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
- *	when MAC doesn't reference BBP signal BBRXEND
- * EIFS: unit 1us
- * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
- *
- */
-#define XIFS_TIME_CFG			0x1100
-#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
-#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
-#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
-#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
-#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
-
-/*
- * BKOFF_SLOT_CFG:
- */
-#define BKOFF_SLOT_CFG			0x1104
-#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
-#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
-
-/*
- * NAV_TIME_CFG:
- */
-#define NAV_TIME_CFG			0x1108
-#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
-#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
-#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
-#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
-
-/*
- * CH_TIME_CFG: count as channel busy
- */
-#define CH_TIME_CFG     	        0x110c
-
-/*
- * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
- */
-#define PBF_LIFE_TIMER     	        0x1110
-
-/*
- * BCN_TIME_CFG:
- * BEACON_INTERVAL: in unit of 1/16 TU
- * TSF_TICKING: Enable TSF auto counting
- * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
- * BEACON_GEN: Enable beacon generator
- */
-#define BCN_TIME_CFG			0x1114
-#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
-#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
-#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
-#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
-#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
-#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
-
-/*
- * TBTT_SYNC_CFG:
- */
-#define TBTT_SYNC_CFG			0x1118
-
-/*
- * TSF_TIMER_DW0: Local lsb TSF timer, read-only
- */
-#define TSF_TIMER_DW0			0x111c
-#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
-
-/*
- * TSF_TIMER_DW1: Local msb TSF timer, read-only
- */
-#define TSF_TIMER_DW1			0x1120
-#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
-
-/*
- * TBTT_TIMER: TImer remains till next TBTT, read-only
- */
-#define TBTT_TIMER			0x1124
-
-/*
- * INT_TIMER_CFG:
- */
-#define INT_TIMER_CFG			0x1128
-
-/*
- * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
- */
-#define INT_TIMER_EN			0x112c
-
-/*
- * CH_IDLE_STA: channel idle time
- */
-#define CH_IDLE_STA			0x1130
-
-/*
- * CH_BUSY_STA: channel busy time
- */
-#define CH_BUSY_STA			0x1134
-
-/*
- * MAC_STATUS_CFG:
- * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
- *	if 1 or higher one of the 2 registers is busy.
- */
-#define MAC_STATUS_CFG			0x1200
-#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
-
-/*
- * PWR_PIN_CFG:
- */
-#define PWR_PIN_CFG			0x1204
-
-/*
- * AUTOWAKEUP_CFG: Manual power control / status register
- * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
- * AUTOWAKE: 0:sleep, 1:awake
- */
-#define AUTOWAKEUP_CFG			0x1208
-#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
-#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
-#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
-
-/*
- * EDCA_AC0_CFG:
- */
-#define EDCA_AC0_CFG			0x1300
-#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC1_CFG:
- */
-#define EDCA_AC1_CFG			0x1304
-#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC2_CFG:
- */
-#define EDCA_AC2_CFG			0x1308
-#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_AC3_CFG:
- */
-#define EDCA_AC3_CFG			0x130c
-#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
-#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
-#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
-#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
-
-/*
- * EDCA_TID_AC_MAP:
- */
-#define EDCA_TID_AC_MAP			0x1310
-
-/*
- * TX_PWR_CFG_0:
- */
-#define TX_PWR_CFG_0			0x1314
-#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
-#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
-#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
-#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
-#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
-#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
-#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
-#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_1:
- */
-#define TX_PWR_CFG_1			0x1318
-#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
-#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
-#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
-#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
-#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
-#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
-#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
-#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_2:
- */
-#define TX_PWR_CFG_2			0x131c
-#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
-#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
-#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
-#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
-#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
-#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
-#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
-#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_3:
- */
-#define TX_PWR_CFG_3			0x1320
-#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
-#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
-#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
-#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
-#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
-#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
-#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
-#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
-
-/*
- * TX_PWR_CFG_4:
- */
-#define TX_PWR_CFG_4			0x1324
-#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
-#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
-#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
-#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
-
-/*
- * TX_PIN_CFG:
- */
-#define TX_PIN_CFG			0x1328
-#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
-#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
-#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
-#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
-#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
-#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
-#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
-#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
-#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
-#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
-#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
-#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
-#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
-#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
-#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
-#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
-#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
-#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
-#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
-#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
-
-/*
- * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
- */
-#define TX_BAND_CFG			0x132c
-#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
-#define TX_BAND_CFG_A			FIELD32(0x00000002)
-#define TX_BAND_CFG_BG			FIELD32(0x00000004)
-
-/*
- * TX_SW_CFG0:
- */
-#define TX_SW_CFG0			0x1330
-
-/*
- * TX_SW_CFG1:
- */
-#define TX_SW_CFG1			0x1334
-
-/*
- * TX_SW_CFG2:
- */
-#define TX_SW_CFG2			0x1338
-
-/*
- * TXOP_THRES_CFG:
- */
-#define TXOP_THRES_CFG			0x133c
-
-/*
- * TXOP_CTRL_CFG:
- */
-#define TXOP_CTRL_CFG			0x1340
-
-/*
- * TX_RTS_CFG:
- * RTS_THRES: unit:byte
- * RTS_FBK_EN: enable rts rate fallback
- */
-#define TX_RTS_CFG			0x1344
-#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
-#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
-#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
-
-/*
- * TX_TIMEOUT_CFG:
- * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
- * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
- * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
- *                it is recommended that:
- *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
- */
-#define TX_TIMEOUT_CFG			0x1348
-#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
-#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
-#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
-
-/*
- * TX_RTY_CFG:
- * SHORT_RTY_LIMIT: short retry limit
- * LONG_RTY_LIMIT: long retry limit
- * LONG_RTY_THRE: Long retry threshoold
- * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
- *                   0:expired by retry limit, 1: expired by mpdu life timer
- * AGG_RTY_MODE: Aggregate MPDU retry mode
- *               0:expired by retry limit, 1: expired by mpdu life timer
- * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
- */
-#define TX_RTY_CFG			0x134c
-#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
-#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
-#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
-#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
-#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
-#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
-
-/*
- * TX_LINK_CFG:
- * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
- * MFB_ENABLE: TX apply remote MFB 1:enable
- * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
- *                     0: not apply remote remote unsolicit (MFS=7)
- * TX_MRQ_EN: MCS request TX enable
- * TX_RDG_EN: RDG TX enable
- * TX_CF_ACK_EN: Piggyback CF-ACK enable
- * REMOTE_MFB: remote MCS feedback
- * REMOTE_MFS: remote MCS feedback sequence number
- */
-#define TX_LINK_CFG			0x1350
-#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
-#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
-#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
-#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
-#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
-#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
-#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
-#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
-
-/*
- * HT_FBK_CFG0:
- */
-#define HT_FBK_CFG0			0x1354
-#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
-#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
-#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
-#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
-#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
-#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
-#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
-#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
-
-/*
- * HT_FBK_CFG1:
- */
-#define HT_FBK_CFG1			0x1358
-#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
-#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
-#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
-#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
-#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
-#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
-#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
-#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
-
-/*
- * LG_FBK_CFG0:
- */
-#define LG_FBK_CFG0			0x135c
-#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
-#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
-#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
-#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
-#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
-#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
-#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
-#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
-
-/*
- * LG_FBK_CFG1:
- */
-#define LG_FBK_CFG1			0x1360
-#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
-#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
-#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
-#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
-
-/*
- * CCK_PROT_CFG: CCK Protection
- * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
- * PROTECT_CTRL: Protection control frame type for CCK TX
- *               0:none, 1:RTS/CTS, 2:CTS-to-self
- * PROTECT_NAV: TXOP protection type for CCK TX
- *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
- * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
- * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
- * RTS_TH_EN: RTS threshold enable on CCK TX
- */
-#define CCK_PROT_CFG			0x1364
-#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * OFDM_PROT_CFG: OFDM Protection
- */
-#define OFDM_PROT_CFG			0x1368
-#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * MM20_PROT_CFG: MM20 Protection
- */
-#define MM20_PROT_CFG			0x136c
-#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * MM40_PROT_CFG: MM40 Protection
- */
-#define MM40_PROT_CFG			0x1370
-#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * GF20_PROT_CFG: GF20 Protection
- */
-#define GF20_PROT_CFG			0x1374
-#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * GF40_PROT_CFG: GF40 Protection
- */
-#define GF40_PROT_CFG			0x1378
-#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
-#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
-#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
-#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
-#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
-
-/*
- * EXP_CTS_TIME:
- */
-#define EXP_CTS_TIME			0x137c
-
-/*
- * EXP_ACK_TIME:
- */
-#define EXP_ACK_TIME			0x1380
-
-/*
- * RX_FILTER_CFG: RX configuration register.
- */
-#define RX_FILTER_CFG			0x1400
-#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
-#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
-#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
-#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
-#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
-#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
-#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
-#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
-#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
-#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
-#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
-#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
-#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
-#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
-#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
-#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
-#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
-
-/*
- * AUTO_RSP_CFG:
- * AUTORESPONDER: 0: disable, 1: enable
- * BAC_ACK_POLICY: 0:long, 1:short preamble
- * CTS_40_MMODE: Response CTS 40MHz duplicate mode
- * CTS_40_MREF: Response CTS 40MHz duplicate mode
- * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
- * DUAL_CTS_EN: Power bit value in control frame
- * ACK_CTS_PSM_BIT:Power bit value in control frame
- */
-#define AUTO_RSP_CFG			0x1404
-#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
-#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
-#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
-#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
-#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
-#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
-#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
-
-/*
- * LEGACY_BASIC_RATE:
- */
-#define LEGACY_BASIC_RATE		0x1408
-
-/*
- * HT_BASIC_RATE:
- */
-#define HT_BASIC_RATE			0x140c
-
-/*
- * HT_CTRL_CFG:
- */
-#define HT_CTRL_CFG			0x1410
-
-/*
- * SIFS_COST_CFG:
- */
-#define SIFS_COST_CFG			0x1414
-
-/*
- * RX_PARSER_CFG:
- * Set NAV for all received frames
- */
-#define RX_PARSER_CFG			0x1418
-
-/*
- * TX_SEC_CNT0:
- */
-#define TX_SEC_CNT0			0x1500
-
-/*
- * RX_SEC_CNT0:
- */
-#define RX_SEC_CNT0			0x1504
-
-/*
- * CCMP_FC_MUTE:
- */
-#define CCMP_FC_MUTE			0x1508
-
-/*
- * TXOP_HLDR_ADDR0:
- */
-#define TXOP_HLDR_ADDR0			0x1600
-
-/*
- * TXOP_HLDR_ADDR1:
- */
-#define TXOP_HLDR_ADDR1			0x1604
-
-/*
- * TXOP_HLDR_ET:
- */
-#define TXOP_HLDR_ET			0x1608
-
-/*
- * QOS_CFPOLL_RA_DW0:
- */
-#define QOS_CFPOLL_RA_DW0		0x160c
-
-/*
- * QOS_CFPOLL_RA_DW1:
- */
-#define QOS_CFPOLL_RA_DW1		0x1610
-
-/*
- * QOS_CFPOLL_QC:
- */
-#define QOS_CFPOLL_QC			0x1614
-
-/*
- * RX_STA_CNT0: RX PLCP error count & RX CRC error count
- */
-#define RX_STA_CNT0			0x1700
-#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
-#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
-
-/*
- * RX_STA_CNT1: RX False CCA count & RX LONG frame count
- */
-#define RX_STA_CNT1			0x1704
-#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
-#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
-
-/*
- * RX_STA_CNT2:
- */
-#define RX_STA_CNT2			0x1708
-#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
-#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT0: TX Beacon count
- */
-#define TX_STA_CNT0			0x170c
-#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
-#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT1: TX tx count
- */
-#define TX_STA_CNT1			0x1710
-#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
-#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_CNT2: TX tx count
- */
-#define TX_STA_CNT2			0x1714
-#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
-#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_STA_FIFO: TX Result for specific PID status fifo register
- */
-#define TX_STA_FIFO			0x1718
-#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
-#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
-#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
-#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
-#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
-#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
-#define TX_STA_FIFO_SUCCESS_RATE	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT: Debug counter
- */
-#define TX_AGG_CNT			0x171c
-#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT0:
- */
-#define TX_AGG_CNT0			0x1720
-#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT1:
- */
-#define TX_AGG_CNT1			0x1724
-#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT2:
- */
-#define TX_AGG_CNT2			0x1728
-#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT3:
- */
-#define TX_AGG_CNT3			0x172c
-#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT4:
- */
-#define TX_AGG_CNT4			0x1730
-#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT5:
- */
-#define TX_AGG_CNT5			0x1734
-#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT6:
- */
-#define TX_AGG_CNT6			0x1738
-#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
-
-/*
- * TX_AGG_CNT7:
- */
-#define TX_AGG_CNT7			0x173c
-#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
-#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
-
-/*
- * MPDU_DENSITY_CNT:
- * TX_ZERO_DEL: TX zero length delimiter count
- * RX_ZERO_DEL: RX zero length delimiter count
- */
-#define MPDU_DENSITY_CNT		0x1740
-#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
-#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
-
-/*
- * Security key table memory.
- * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
- * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
- * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
- * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
- * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry
- * SHARED_KEY_MODE_BASE: 4 bits * 32-entry
- */
-#define MAC_WCID_BASE			0x1800
-#define PAIRWISE_KEY_TABLE_BASE		0x4000
-#define MAC_IVEIV_TABLE_BASE		0x6000
-#define MAC_WCID_ATTRIBUTE_BASE		0x6800
-#define SHARED_KEY_TABLE_BASE		0x6c00
-#define SHARED_KEY_MODE_BASE		0x7000
-
-#define MAC_WCID_ENTRY(__idx) \
-	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
-#define PAIRWISE_KEY_ENTRY(__idx) \
-	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-#define MAC_IVEIV_ENTRY(__idx) \
-	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
-#define MAC_WCID_ATTR_ENTRY(__idx) \
-	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
-#define SHARED_KEY_ENTRY(__idx) \
-	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
-#define SHARED_KEY_MODE_ENTRY(__idx) \
-	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
-
-struct mac_wcid_entry {
-	u8 mac[6];
-	u8 reserved[2];
-} __attribute__ ((packed));
-
-struct hw_key_entry {
-	u8 key[16];
-	u8 tx_mic[8];
-	u8 rx_mic[8];
-} __attribute__ ((packed));
-
-struct mac_iveiv_entry {
-	u8 iv[8];
-} __attribute__ ((packed));
-
-/*
- * MAC_WCID_ATTRIBUTE:
- */
-#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
-#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
-#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
-#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
-
-/*
- * SHARED_KEY_MODE:
- */
-#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
-#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
-#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
-#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
-#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
-#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
-#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
-#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
-
-/*
- * HOST-MCU communication
- */
-
-/*
- * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
- */
-#define H2M_MAILBOX_CSR			0x7010
-#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
-#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
-#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
-#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
-
-/*
- * H2M_MAILBOX_CID:
- */
-#define H2M_MAILBOX_CID			0x7014
-#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
-#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
-#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
-#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
-
-/*
- * H2M_MAILBOX_STATUS:
- */
-#define H2M_MAILBOX_STATUS		0x701c
-
-/*
- * H2M_INT_SRC:
- */
-#define H2M_INT_SRC			0x7024
-
-/*
- * H2M_BBP_AGENT:
- */
-#define H2M_BBP_AGENT			0x7028
-
-/*
- * MCU_LEDCS: LED control for MCU Mailbox.
- */
-#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
-#define MCU_LEDCS_POLARITY		FIELD8(0x01)
-
-/*
- * HW_CS_CTS_BASE:
- * Carrier-sense CTS frame base address.
- * It's where mac stores carrier-sense frame for carrier-sense function.
- */
-#define HW_CS_CTS_BASE			0x7700
-
-/*
- * HW_DFS_CTS_BASE:
- * FS CTS frame base address. It's where mac stores CTS frame for DFS.
- */
-#define HW_DFS_CTS_BASE			0x7780
-
-/*
- * TXRX control registers - base address 0x3000
- */
-
-/*
- * TXRX_CSR1:
- * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
- */
-#define TXRX_CSR1			0x77d0
-
-/*
- * HW_DEBUG_SETTING_BASE:
- * since NULL frame won't be that long (256 byte)
- * We steal 16 tail bytes to save debugging settings
- */
-#define HW_DEBUG_SETTING_BASE		0x77f0
-#define HW_DEBUG_SETTING_BASE2		0x7770
-
-/*
- * HW_BEACON_BASE
- * In order to support maximum 8 MBSS and its maximum length
- * is 512 bytes for each beacon
- * Three section discontinue memory segments will be used.
- * 1. The original region for BCN 0~3
- * 2. Extract memory from FCE table for BCN 4~5
- * 3. Extract memory from Pair-wise key table for BCN 6~7
- *    It occupied those memory of wcid 238~253 for BCN 6
- *    and wcid 222~237 for BCN 7
- *
- * IMPORTANT NOTE: Not sure why legacy driver does this,
- * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
- */
-#define HW_BEACON_BASE0			0x7800
-#define HW_BEACON_BASE1			0x7a00
-#define HW_BEACON_BASE2			0x7c00
-#define HW_BEACON_BASE3			0x7e00
-#define HW_BEACON_BASE4			0x7200
-#define HW_BEACON_BASE5			0x7400
-#define HW_BEACON_BASE6			0x5dc0
-#define HW_BEACON_BASE7			0x5bc0
-
-#define HW_BEACON_OFFSET(__index) \
-	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
-
-/*
  * 8051 firmware image.
  */
 #define FIRMWARE_RT2870			"rt2870.bin"
 #define FIRMWARE_IMAGE_BASE		0x3000
 
 /*
- * BBP registers.
- * The wordsize of the BBP is 8 bits.
- */
-
-/*
- * BBP 1: TX Antenna
- */
-#define BBP1_TX_POWER			FIELD8(0x07)
-#define BBP1_TX_ANTENNA			FIELD8(0x18)
-
-/*
- * BBP 3: RX Antenna
- */
-#define BBP3_RX_ANTENNA			FIELD8(0x18)
-#define BBP3_HT40_PLUS			FIELD8(0x20)
-
-/*
- * BBP 4: Bandwidth
- */
-#define BBP4_TX_BF			FIELD8(0x01)
-#define BBP4_BANDWIDTH			FIELD8(0x18)
-
-/*
- * RFCSR registers
- * The wordsize of the RFCSR is 8 bits.
- */
-
-/*
- * RFCSR 6:
- */
-#define RFCSR6_R			FIELD8(0x03)
-
-/*
- * RFCSR 7:
- */
-#define RFCSR7_RF_TUNING		FIELD8(0x01)
-
-/*
- * RFCSR 12:
- */
-#define RFCSR12_TX_POWER		FIELD8(0x1f)
-
-/*
- * RFCSR 22:
- */
-#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
-
-/*
- * RFCSR 23:
- */
-#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
-
-/*
- * RFCSR 30:
- */
-#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
-
-/*
- * RF registers
- */
-
-/*
- * RF 2
- */
-#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
-#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
-#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
-
-/*
- * RF 3
- */
-#define RF3_TXPOWER_G			FIELD32(0x00003e00)
-#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
-#define RF3_TXPOWER_A			FIELD32(0x00003c00)
-
-/*
- * RF 4
- */
-#define RF4_TXPOWER_G			FIELD32(0x000007c0)
-#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
-#define RF4_TXPOWER_A			FIELD32(0x00000780)
-#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
-#define RF4_HT40			FIELD32(0x00200000)
-
-/*
- * EEPROM content.
- * The wordsize of the EEPROM is 16 bits.
- */
-
-/*
- * EEPROM Version
- */
-#define EEPROM_VERSION			0x0001
-#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
-#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
-
-/*
- * HW MAC address.
- */
-#define EEPROM_MAC_ADDR_0		0x0002
-#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_1		0x0003
-#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_2		0x0004
-#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
-
-/*
- * EEPROM ANTENNA config
- * RXPATH: 1: 1R, 2: 2R, 3: 3R
- * TXPATH: 1: 1T, 2: 2T
- */
-#define	EEPROM_ANTENNA			0x001a
-#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
-#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
-#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
-
-/*
- * EEPROM NIC config
- * CARDBUS_ACCEL: 0 - enable, 1 - disable
- */
-#define	EEPROM_NIC			0x001b
-#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
-#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
-#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
-#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
-#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
-#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
-#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
-#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
-#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
-#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
-
-/*
- * EEPROM frequency
- */
-#define	EEPROM_FREQ			0x001d
-#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
-#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
-#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
-
-/*
- * EEPROM LED
- * POLARITY_RDY_G: Polarity RDY_G setting.
- * POLARITY_RDY_A: Polarity RDY_A setting.
- * POLARITY_ACT: Polarity ACT setting.
- * POLARITY_GPIO_0: Polarity GPIO0 setting.
- * POLARITY_GPIO_1: Polarity GPIO1 setting.
- * POLARITY_GPIO_2: Polarity GPIO2 setting.
- * POLARITY_GPIO_3: Polarity GPIO3 setting.
- * POLARITY_GPIO_4: Polarity GPIO4 setting.
- * LED_MODE: Led mode.
- */
-#define EEPROM_LED1			0x001e
-#define EEPROM_LED2			0x001f
-#define EEPROM_LED3			0x0020
-#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
-#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
-#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
-#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
-#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
-#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
-#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
-#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
-#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
-
-/*
- * EEPROM LNA
- */
-#define EEPROM_LNA			0x0022
-#define EEPROM_LNA_BG			FIELD16(0x00ff)
-#define EEPROM_LNA_A0			FIELD16(0xff00)
-
-/*
- * EEPROM RSSI BG offset
- */
-#define EEPROM_RSSI_BG			0x0023
-#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
-#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI BG2 offset
- */
-#define EEPROM_RSSI_BG2			0x0024
-#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
-#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI A offset
- */
-#define EEPROM_RSSI_A			0x0025
-#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
-#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI A2 offset
- */
-#define EEPROM_RSSI_A2			0x0026
-#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
-#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
-
-/*
- * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
- *	This is delta in 40MHZ.
- * VALUE: Tx Power dalta value (MAX=4)
- * TYPE: 1: Plus the delta value, 0: minus the delta value
- * TXPOWER: Enable:
- */
-#define EEPROM_TXPOWER_DELTA		0x0028
-#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
-#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
-#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
-
-/*
- * EEPROM TXPOWER 802.11BG
- */
-#define	EEPROM_TXPOWER_BG1		0x0029
-#define	EEPROM_TXPOWER_BG2		0x0030
-#define EEPROM_TXPOWER_BG_SIZE		7
-#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
-
-/*
- * EEPROM TXPOWER 802.11A
- */
-#define EEPROM_TXPOWER_A1		0x003c
-#define EEPROM_TXPOWER_A2		0x0053
-#define EEPROM_TXPOWER_A_SIZE		6
-#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
-
-/*
- * EEPROM TXpower byrate: 20MHZ power
- */
-#define EEPROM_TXPOWER_BYRATE		0x006f
-
-/*
- * EEPROM BBP.
- */
-#define	EEPROM_BBP_START		0x0078
-#define EEPROM_BBP_SIZE			16
-#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
-#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
-
-/*
- * MCU mailbox commands.
- */
-#define MCU_SLEEP			0x30
-#define MCU_WAKEUP			0x31
-#define MCU_RADIO_OFF			0x35
-#define MCU_CURRENT			0x36
-#define MCU_LED				0x50
-#define MCU_LED_STRENGTH		0x51
-#define MCU_LED_1			0x52
-#define MCU_LED_2			0x53
-#define MCU_LED_3			0x54
-#define MCU_RADAR			0x60
-#define MCU_BOOT_SIGNAL			0x72
-#define MCU_BBP_SIGNAL			0x80
-#define MCU_POWER_SAVE			0x83
-
-/*
- * MCU mailbox tokens
- */
-#define TOKEN_WAKUP			3
-
-/*
  * DMA descriptor defines.
  */
-#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
 #define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
-#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 1 * sizeof(__le32) )
-#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
-
-/*
- * TX descriptor format for TX, PRIO and Beacon Ring.
- */
-
-/*
- * Word0
- */
-#define TXD_W0_SD_PTR0			FIELD32(0xffffffff)
-
-/*
- * Word1
- */
-#define TXD_W1_SD_LEN1			FIELD32(0x00003fff)
-#define TXD_W1_LAST_SEC1		FIELD32(0x00004000)
-#define TXD_W1_BURST			FIELD32(0x00008000)
-#define TXD_W1_SD_LEN0			FIELD32(0x3fff0000)
-#define TXD_W1_LAST_SEC0		FIELD32(0x40000000)
-#define TXD_W1_DMA_DONE			FIELD32(0x80000000)
-
-/*
- * Word2
- */
-#define TXD_W2_SD_PTR1			FIELD32(0xffffffff)
-
-/*
- * Word3
- * WIV: Wireless Info Valid. 1: Driver filled WI,  0: DMA needs to copy WI
- * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
- *       0:MGMT, 1:HCCA 2:EDCA
- */
-#define TXD_W3_WIV			FIELD32(0x01000000)
-#define TXD_W3_QSEL			FIELD32(0x06000000)
-#define TXD_W3_TCO			FIELD32(0x20000000)
-#define TXD_W3_UCO			FIELD32(0x40000000)
-#define TXD_W3_ICO			FIELD32(0x80000000)
+#define RXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
 
 /*
  * TX Info structure
@@ -1807,52 +101,6 @@
 #define TXINFO_W0_USB_DMA_TX_BURST	FIELD32(0x80000000)
 
 /*
- * TX WI structure
- */
-
-/*
- * Word0
- * FRAG: 1 To inform TKIP engine this is a fragment.
- * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
- * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
- * BW: Channel bandwidth 20MHz or 40 MHz
- * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
- */
-#define TXWI_W0_FRAG			FIELD32(0x00000001)
-#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
-#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
-#define TXWI_W0_TS			FIELD32(0x00000008)
-#define TXWI_W0_AMPDU			FIELD32(0x00000010)
-#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
-#define TXWI_W0_TX_OP			FIELD32(0x00000300)
-#define TXWI_W0_MCS			FIELD32(0x007f0000)
-#define TXWI_W0_BW			FIELD32(0x00800000)
-#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
-#define TXWI_W0_STBC			FIELD32(0x06000000)
-#define TXWI_W0_IFS			FIELD32(0x08000000)
-#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word1
- */
-#define TXWI_W1_ACK			FIELD32(0x00000001)
-#define TXWI_W1_NSEQ			FIELD32(0x00000002)
-#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
-#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
-#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
-
-/*
- * Word2
- */
-#define TXWI_W2_IV			FIELD32(0xffffffff)
-
-/*
- * Word3
- */
-#define TXWI_W3_EIV			FIELD32(0xffffffff)
-
-/*
  * RX descriptor format for RX Ring.
  */
 
@@ -1867,85 +115,25 @@
  * AMSDU: rx with 802.3 header, not 802.11 header.
  */
 
-#define RXD_W0_BA			FIELD32(0x00000001)
-#define RXD_W0_DATA			FIELD32(0x00000002)
-#define RXD_W0_NULLDATA			FIELD32(0x00000004)
-#define RXD_W0_FRAG			FIELD32(0x00000008)
-#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000010)
-#define RXD_W0_MULTICAST		FIELD32(0x00000020)
-#define RXD_W0_BROADCAST		FIELD32(0x00000040)
-#define RXD_W0_MY_BSS			FIELD32(0x00000080)
-#define RXD_W0_CRC_ERROR		FIELD32(0x00000100)
-#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000600)
-#define RXD_W0_AMSDU			FIELD32(0x00000800)
-#define RXD_W0_HTC			FIELD32(0x00001000)
-#define RXD_W0_RSSI			FIELD32(0x00002000)
-#define RXD_W0_L2PAD			FIELD32(0x00004000)
-#define RXD_W0_AMPDU			FIELD32(0x00008000)
-#define RXD_W0_DECRYPTED		FIELD32(0x00010000)
-#define RXD_W0_PLCP_RSSI		FIELD32(0x00020000)
-#define RXD_W0_CIPHER_ALG		FIELD32(0x00040000)
-#define RXD_W0_LAST_AMSDU		FIELD32(0x00080000)
-#define RXD_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
-
-/*
- * RX WI structure
- */
-
-/*
- * Word0
- */
-#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
-#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
-#define RXWI_W0_BSSID			FIELD32(0x00001c00)
-#define RXWI_W0_UDF			FIELD32(0x0000e000)
-#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
-#define RXWI_W0_TID			FIELD32(0xf0000000)
-
-/*
- * Word1
- */
-#define RXWI_W1_FRAG			FIELD32(0x0000000f)
-#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
-#define RXWI_W1_MCS			FIELD32(0x007f0000)
-#define RXWI_W1_BW			FIELD32(0x00800000)
-#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
-#define RXWI_W1_STBC			FIELD32(0x06000000)
-#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
-
-/*
- * Word2
- */
-#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
-#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
-#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
-
-/*
- * Word3
- */
-#define RXWI_W3_SNR0			FIELD32(0x000000ff)
-#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
-
-/*
- * Macros for converting txpower from EEPROM to mac80211 value
- * and from mac80211 value to register value.
- */
-#define MIN_G_TXPOWER	0
-#define MIN_A_TXPOWER	-7
-#define MAX_G_TXPOWER	31
-#define MAX_A_TXPOWER	15
-#define DEFAULT_TXPOWER	5
-
-#define TXPOWER_G_FROM_DEV(__txpower) \
-	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_G_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
-
-#define TXPOWER_A_FROM_DEV(__txpower) \
-	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_A_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+#define RXINFO_W0_BA			FIELD32(0x00000001)
+#define RXINFO_W0_DATA			FIELD32(0x00000002)
+#define RXINFO_W0_NULLDATA		FIELD32(0x00000004)
+#define RXINFO_W0_FRAG			FIELD32(0x00000008)
+#define RXINFO_W0_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXINFO_W0_MULTICAST		FIELD32(0x00000020)
+#define RXINFO_W0_BROADCAST		FIELD32(0x00000040)
+#define RXINFO_W0_MY_BSS		FIELD32(0x00000080)
+#define RXINFO_W0_CRC_ERROR		FIELD32(0x00000100)
+#define RXINFO_W0_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXINFO_W0_AMSDU			FIELD32(0x00000800)
+#define RXINFO_W0_HTC			FIELD32(0x00001000)
+#define RXINFO_W0_RSSI			FIELD32(0x00002000)
+#define RXINFO_W0_L2PAD			FIELD32(0x00004000)
+#define RXINFO_W0_AMPDU			FIELD32(0x00008000)
+#define RXINFO_W0_DECRYPTED		FIELD32(0x00010000)
+#define RXINFO_W0_PLCP_RSSI		FIELD32(0x00020000)
+#define RXINFO_W0_CIPHER_ALG		FIELD32(0x00040000)
+#define RXINFO_W0_LAST_AMSDU		FIELD32(0x00080000)
+#define RXINFO_W0_PLCP_SIGNAL		FIELD32(0xfff00000)
 
 #endif /* RT2800USB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 27bc6b7..4d841c0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -144,6 +145,11 @@
 	int avg_weight;
 };
 
+enum rt2x00_chip_intf {
+	RT2X00_CHIP_INTF_PCI,
+	RT2X00_CHIP_INTF_USB,
+};
+
 /*
  * Chipset identification
  * The chipset on the device is composed of a RT and RF chip.
@@ -158,10 +164,20 @@
 #define RT2561		0x0302
 #define RT2661		0x0401
 #define RT2571		0x1300
+#define RT2860		0x0601	/* 2.4GHz PCI/CB */
+#define RT2860D		0x0681	/* 2.4GHz, 5GHz PCI/CB */
+#define RT2890		0x0701	/* 2.4GHz PCIe */
+#define RT2890D		0x0781	/* 2.4GHz, 5GHz PCIe */
+#define RT2880		0x2880	/* WSOC */
+#define RT3052		0x3052	/* WSOC */
+#define RT3090		0x3090	/* 2.4GHz PCIe */
 #define RT2870		0x1600
+#define RT3070		0x1800
 
 	u16 rf;
 	u32 rev;
+
+	enum rt2x00_chip_intf intf;
 };
 
 /*
@@ -299,13 +315,6 @@
 	struct avg_val avg_rssi;
 
 	/*
-	 * Currently precalculated percentages of successful
-	 * TX and RX frames.
-	 */
-	int rx_percentage;
-	int tx_percentage;
-
-	/*
 	 * Work structure for scheduling periodic link tuning.
 	 */
 	struct delayed_work work;
@@ -579,6 +588,7 @@
 	const unsigned int eeprom_size;
 	const unsigned int rf_size;
 	const unsigned int tx_queues;
+	const unsigned int extra_tx_headroom;
 	const struct data_queue_desc *rx;
 	const struct data_queue_desc *tx;
 	const struct data_queue_desc *bcn;
@@ -835,9 +845,23 @@
 	 * Firmware image.
 	 */
 	const struct firmware *fw;
+
+	/*
+	 * Driver specific data.
+	 */
+	void *priv;
 };
 
 /*
+ * Register defines.
+ * Some registers require multiple attempts before success,
+ * in those cases REGISTER_BUSY_COUNT attempts should be
+ * taken with a REGISTER_BUSY_DELAY interval.
+ */
+#define REGISTER_BUSY_COUNT	5
+#define REGISTER_BUSY_DELAY	100
+
+/*
  * Generic RF access.
  * The RF is being accessed by word index.
  */
@@ -883,10 +907,6 @@
 static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
 				   const u16 rt, const u16 rf, const u32 rev)
 {
-	INFO(rt2x00dev,
-	     "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
-	     rt, rf, rev);
-
 	rt2x00dev->chip.rt = rt;
 	rt2x00dev->chip.rf = rf;
 	rt2x00dev->chip.rev = rev;
@@ -904,6 +924,13 @@
 	rt2x00_set_chip(rt2x00dev, rt2x00dev->chip.rt, rf, rev);
 }
 
+static inline void rt2x00_print_chip(struct rt2x00_dev *rt2x00dev)
+{
+	INFO(rt2x00dev,
+	     "Chipset detected - rt: %04x, rf: %04x, rev: %08x.\n",
+	     rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
+}
+
 static inline char rt2x00_rt(const struct rt2x00_chip *chipset, const u16 chip)
 {
 	return (chipset->rt == chip);
@@ -925,6 +952,28 @@
 	return ((chipset->rev & mask) == rev);
 }
 
+static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
+					enum rt2x00_chip_intf intf)
+{
+	rt2x00dev->chip.intf = intf;
+}
+
+static inline bool rt2x00_intf(const struct rt2x00_chip *chipset,
+			       enum rt2x00_chip_intf intf)
+{
+	return (chipset->intf == intf);
+}
+
+static inline bool rt2x00_intf_is_pci(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_PCI);
+}
+
+static inline bool rt2x00_intf_is_usb(struct rt2x00_dev *rt2x00dev)
+{
+	return rt2x00_intf(&rt2x00dev->chip, RT2X00_CHIP_INTF_USB);
+}
+
 /**
  * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 40a201e..098315a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index de36837d..d291c78 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index 68bc9bb..7d323a7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.h b/drivers/net/wireless/rt2x00/rt2x00debug.h
index 035cbc9..fa11409 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.h
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 73bbec5..06c43ca 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -205,6 +205,7 @@
 	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
 	unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
 	u8 rate_idx, rate_flags, retry_rates;
+	u8 skbdesc_flags = skbdesc->flags;
 	unsigned int i;
 	bool success;
 
@@ -287,12 +288,12 @@
 	}
 
 	/*
-	 * Only send the status report to mac80211 when TX status was
-	 * requested by it. If this was a extra frame coming through
-	 * a mac80211 library call (RTS/CTS) then we should not send the
-	 * status report back.
+	 * Only send the status report to mac80211 when it's a frame
+	 * that originated in mac80211. If this was a extra frame coming
+	 * through a mac80211 library call (RTS/CTS) then we should not
+	 * send the status report back.
 	 */
-	if (tx_info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
+	if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
 		ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
 	else
 		dev_kfree_skb_irq(entry->skb);
@@ -430,7 +431,6 @@
 
 	rx_status->mactime = rxdesc.timestamp;
 	rx_status->rate_idx = rate_idx;
-	rx_status->qual = rt2x00link_calculate_signal(rt2x00dev, rxdesc.rssi);
 	rx_status->signal = rxdesc.rssi;
 	rx_status->noise = rxdesc.noise;
 	rx_status->flag = rxdesc.flags;
@@ -684,6 +684,11 @@
 	rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
 
 	/*
+	 * Initialize extra TX headroom required.
+	 */
+	rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+
+	/*
 	 * Register HW.
 	 */
 	status = ieee80211_register_hw(rt2x00dev->hw);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h
index fdedb51..727019a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dump.h
+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c
index d2deea2..34beb00 100644
--- a/drivers/net/wireless/rt2x00/rt2x00firmware.c
+++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index e3cec83..1056c92 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index 49671fe..ca585e3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.h b/drivers/net/wireless/rt2x00/rt2x00leds.h
index 1046977..3b46f0c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.h
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -33,8 +33,6 @@
 	LED_TYPE_QUALITY,
 };
 
-#ifdef CONFIG_RT2X00_LIB_LEDS
-
 struct rt2x00_led {
 	struct rt2x00_dev *rt2x00dev;
 	struct led_classdev led_dev;
@@ -45,6 +43,4 @@
 #define LED_REGISTERED		( 1 << 1 )
 };
 
-#endif /* CONFIG_RT2X00_LIB_LEDS */
-
 #endif /* RT2X00LEDS_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 567f029..be2e37f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -161,8 +162,10 @@
  * rt2x00queue_write_tx_frame - Write TX frame to hardware
  * @queue: Queue over which the frame should be send
  * @skb: The skb to send
+ * @local: frame is not from mac80211
  */
-int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb);
+int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
+			       bool local);
 
 /**
  * rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware
@@ -223,19 +226,6 @@
 			     struct rxdone_entry_desc *rxdesc);
 
 /**
- * rt2x00link_calculate_signal - Calculate signal quality
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- * @rssi: RX Frame RSSI
- *
- * Calculate the signal quality of a frame based on the rssi
- * measured during the receiving of the frame and the global
- * link quality statistics measured since the start of the
- * link tuning. The result is a value between 0 and 100 which
- * is an indication of the signal quality.
- */
-int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi);
-
-/**
  * rt2x00link_start_tuner - Start periodic link tuner work
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index c708d0b..0efbf5a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -36,24 +36,6 @@
 #define DEFAULT_RSSI		-128
 
 /*
- * When no TX/RX percentage could be calculated due to lack of
- * frames on the air, we fallback to a percentage of 50%.
- * This will assure we will get at least get some decent value
- * when the link tuner starts.
- * The value will be dropped and overwritten with the correct (measured)
- * value anyway during the first run of the link tuner.
- */
-#define DEFAULT_PERCENTAGE	50
-
-/*
- * Small helper macro for percentage calculation
- * This is a very simple macro with the only catch that it will
- * produce a default value in case no total value was provided.
- */
-#define PERCENTAGE(__value, __total) \
-	( (__total) ? (((__value) * 100) / (__total)) : (DEFAULT_PERCENTAGE) )
-
-/*
  * Helper struct and macro to work with moving/walking averages.
  * When adding a value to the average value the following calculation
  * is needed:
@@ -91,27 +73,6 @@
 	__new; \
 })
 
-/*
- * For calculating the Signal quality we have determined
- * the total number of success and failed RX and TX frames.
- * With the addition of the average RSSI value we can determine
- * the link quality using the following algorithm:
- *
- *         rssi_percentage = (avg_rssi * 100) / rssi_offset
- *         rx_percentage = (rx_success * 100) / rx_total
- *         tx_percentage = (tx_success * 100) / tx_total
- *         avg_signal = ((WEIGHT_RSSI * avg_rssi) +
- *                       (WEIGHT_TX * tx_percentage) +
- *                       (WEIGHT_RX * rx_percentage)) / 100
- *
- * This value should then be checked to not be greater then 100.
- * This means the values of WEIGHT_RSSI, WEIGHT_RX, WEIGHT_TX must
- * sum up to 100 as well.
- */
-#define WEIGHT_RSSI	20
-#define WEIGHT_RX	40
-#define WEIGHT_TX	40
-
 static int rt2x00link_antenna_get_link_rssi(struct rt2x00_dev *rt2x00dev)
 {
 	struct link_ant *ant = &rt2x00dev->link.ant;
@@ -304,46 +265,6 @@
 	ant->rssi_ant = MOVING_AVERAGE(ant->rssi_ant, rxdesc->rssi);
 }
 
-static void rt2x00link_precalculate_signal(struct rt2x00_dev *rt2x00dev)
-{
-	struct link *link = &rt2x00dev->link;
-	struct link_qual *qual = &rt2x00dev->link.qual;
-
-	link->rx_percentage =
-	    PERCENTAGE(qual->rx_success, qual->rx_failed + qual->rx_success);
-	link->tx_percentage =
-	    PERCENTAGE(qual->tx_success, qual->tx_failed + qual->tx_success);
-}
-
-int rt2x00link_calculate_signal(struct rt2x00_dev *rt2x00dev, int rssi)
-{
-	struct link *link = &rt2x00dev->link;
-	int rssi_percentage = 0;
-	int signal;
-
-	/*
-	 * We need a positive value for the RSSI.
-	 */
-	if (rssi < 0)
-		rssi += rt2x00dev->rssi_offset;
-
-	/*
-	 * Calculate the different percentages,
-	 * which will be used for the signal.
-	 */
-	rssi_percentage = PERCENTAGE(rssi, rt2x00dev->rssi_offset);
-
-	/*
-	 * Add the individual percentages and use the WEIGHT
-	 * defines to calculate the current link signal.
-	 */
-	signal = ((WEIGHT_RSSI * rssi_percentage) +
-		  (WEIGHT_TX * link->tx_percentage) +
-		  (WEIGHT_RX * link->rx_percentage)) / 100;
-
-	return max_t(int, signal, 100);
-}
-
 void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
 {
 	struct link *link = &rt2x00dev->link;
@@ -357,9 +278,6 @@
 	if (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)
 		return;
 
-	link->rx_percentage = DEFAULT_PERCENTAGE;
-	link->tx_percentage = DEFAULT_PERCENTAGE;
-
 	rt2x00link_reset_tuner(rt2x00dev, false);
 
 	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
@@ -448,12 +366,6 @@
 		rt2x00dev->ops->lib->link_tuner(rt2x00dev, qual, link->count);
 
 	/*
-	 * Precalculate a portion of the link signal which is
-	 * in based on the tx/rx success/failure counters.
-	 */
-	rt2x00link_precalculate_signal(rt2x00dev);
-
-	/*
 	 * Send a signal to the led to update the led signal strength.
 	 */
 	rt2x00leds_led_quality(rt2x00dev, qual->rssi);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 929b85f..de549c2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -66,7 +66,6 @@
 	rts_info = IEEE80211_SKB_CB(skb);
 	rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS;
 	rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT;
-	rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS;
 
 	if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
 		rts_info->flags |= IEEE80211_TX_CTL_NO_ACK;
@@ -91,7 +90,7 @@
 				  frag_skb->data, data_length, tx_info,
 				  (struct ieee80211_rts *)(skb->data));
 
-	retval = rt2x00queue_write_tx_frame(queue, skb);
+	retval = rt2x00queue_write_tx_frame(queue, skb, true);
 	if (retval) {
 		dev_kfree_skb_any(skb);
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
@@ -104,10 +103,8 @@
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	enum data_queue_qid qid = skb_get_queue_mapping(skb);
 	struct data_queue *queue;
-	u16 frame_control;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -142,7 +139,6 @@
 	 * either RTS or CTS-to-self frame and handles everything
 	 * inside the hardware.
 	 */
-	frame_control = le16_to_cpu(ieee80211hdr->frame_control);
 	if ((tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS |
 						IEEE80211_TX_RC_USE_CTS_PROTECT)) &&
 	    !rt2x00dev->ops->hw->set_rts_threshold) {
@@ -153,7 +149,7 @@
 			goto exit_fail;
 	}
 
-	if (rt2x00queue_write_tx_frame(queue, skb))
+	if (rt2x00queue_write_tx_frame(queue, skb, false))
 		goto exit_fail;
 
 	if (rt2x00queue_threshold(queue))
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index cdd5154..0feb4d0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -310,6 +310,8 @@
 	rt2x00dev->irq = pci_dev->irq;
 	rt2x00dev->name = pci_name(pci_dev);
 
+	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
+
 	/*
 	 * Determine RT chipset by reading PCI header.
 	 */
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index 15a1248..d4f9449 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -35,15 +35,6 @@
 #define PCI_DEVICE_DATA(__ops)	.driver_data = (kernel_ulong_t)(__ops)
 
 /*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
- */
-#define REGISTER_BUSY_COUNT	5
-#define REGISTER_BUSY_DELAY	100
-
-/*
  * Register access.
  */
 static inline void rt2x00pci_register_read(struct rt2x00_dev *rt2x00dev,
@@ -53,10 +44,9 @@
 	*value = readl(rt2x00dev->csr.base + offset);
 }
 
-static inline void
-rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
-			     const unsigned int offset,
-			     void *value, const u16 length)
+static inline void rt2x00pci_register_multiread(struct rt2x00_dev *rt2x00dev,
+						const unsigned int offset,
+						void *value, const u32 length)
 {
 	memcpy_fromio(value, rt2x00dev->csr.base + offset, length);
 }
@@ -68,10 +58,10 @@
 	writel(value, rt2x00dev->csr.base + offset);
 }
 
-static inline void
-rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-			      const unsigned int offset,
-			      const void *value, const u16 length)
+static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+						 const unsigned int offset,
+						 const void *value,
+						 const u32 length)
 {
 	memcpy_toio(rt2x00dev->csr.base + offset, value, length);
 }
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 577029e..239afc7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -1,5 +1,6 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -161,10 +162,10 @@
 	skb_trim(skb, frame_length);
 }
 
-void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_lengt)
+void rt2x00queue_align_payload(struct sk_buff *skb, unsigned int header_length)
 {
 	unsigned int frame_length = skb->len;
-	unsigned int align = ALIGN_SIZE(skb, header_lengt);
+	unsigned int align = ALIGN_SIZE(skb, header_length);
 
 	if (!align)
 		return;
@@ -213,7 +214,7 @@
 		skb_push(skb, header_align);
 		memmove(skb->data, skb->data + header_align, header_length);
 		memmove(skb->data + header_length + l2pad,
-			skb->data + header_length + l2pad + header_align,
+			skb->data + header_length + l2pad + payload_align,
 			frame_length - header_length);
 		skbdesc->flags |= SKBDESC_L2_PADDED;
 	}
@@ -453,7 +454,8 @@
 		rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid);
 }
 
-int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb)
+int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
+			       bool local)
 {
 	struct ieee80211_tx_info *tx_info;
 	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
@@ -494,6 +496,9 @@
 	skbdesc->tx_rate_idx = rate_idx;
 	skbdesc->tx_rate_flags = rate_flags;
 
+	if (local)
+		skbdesc->flags |= SKBDESC_NOT_MAC80211;
+
 	/*
 	 * When hardware encryption is supported, and this frame
 	 * is to be encrypted, we should strip the IV/EIV data from
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index a5591fb..70775e5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -94,12 +94,15 @@
  *	mac80211 but was stripped for processing by the driver.
  * @SKBDESC_L2_PADDED: Payload has been padded for 4-byte alignment,
  *	the padded bytes are located between header and payload.
+ * @SKBDESC_NOT_MAC80211: Frame didn't originate from mac80211,
+ *	don't try to pass it back.
  */
 enum skb_frame_desc_flags {
 	SKBDESC_DMA_MAPPED_RX = 1 << 0,
 	SKBDESC_DMA_MAPPED_TX = 1 << 1,
 	SKBDESC_IV_STRIPPED = 1 << 2,
-	SKBDESC_L2_PADDED = 1 << 3
+	SKBDESC_L2_PADDED = 1 << 3,
+	SKBDESC_NOT_MAC80211 = 1 << 4,
 };
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 983e52e..603bfc0 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
new file mode 100644
index 0000000..19e684f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -0,0 +1,165 @@
+/*
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	Copyright (C) 2004 - 2009 Felix Fietkau <nbd@openwrt.org>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00soc
+	Abstract: rt2x00 generic soc device routines.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "rt2x00.h"
+#include "rt2x00soc.h"
+
+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
+{
+	kfree(rt2x00dev->rf);
+	rt2x00dev->rf = NULL;
+
+	kfree(rt2x00dev->eeprom);
+	rt2x00dev->eeprom = NULL;
+}
+
+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+{
+	struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
+	if (!rt2x00dev->csr.base)
+		goto exit;
+
+	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
+	if (!rt2x00dev->eeprom)
+		goto exit;
+
+	rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
+	if (!rt2x00dev->rf)
+		goto exit;
+
+	return 0;
+
+exit:
+	ERROR_PROBE("Failed to allocate registers.\n");
+	rt2x00soc_free_reg(rt2x00dev);
+
+	return -ENOMEM;
+}
+
+int rt2x00soc_probe(struct platform_device *pdev,
+		    const unsigned short chipset,
+		    const struct rt2x00_ops *ops)
+{
+	struct ieee80211_hw *hw;
+	struct rt2x00_dev *rt2x00dev;
+	int retval;
+
+	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
+	if (!hw) {
+		ERROR_PROBE("Failed to allocate hardware.\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, hw);
+
+	rt2x00dev = hw->priv;
+	rt2x00dev->dev = &pdev->dev;
+	rt2x00dev->ops = ops;
+	rt2x00dev->hw = hw;
+	rt2x00dev->irq = platform_get_irq(pdev, 0);
+	rt2x00dev->name = pdev->dev.driver->name;
+
+	/*
+	 * SoC devices mimic PCI behavior.
+	 */
+	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
+
+	rt2x00_set_chip_rt(rt2x00dev, chipset);
+
+	retval = rt2x00soc_alloc_reg(rt2x00dev);
+	if (retval)
+		goto exit_free_device;
+
+	retval = rt2x00lib_probe_dev(rt2x00dev);
+	if (retval)
+		goto exit_free_reg;
+
+	return 0;
+
+exit_free_reg:
+	rt2x00soc_free_reg(rt2x00dev);
+
+exit_free_device:
+	ieee80211_free_hw(hw);
+
+	return retval;
+}
+
+int rt2x00soc_remove(struct platform_device *pdev)
+{
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	/*
+	 * Free all allocated data.
+	 */
+	rt2x00lib_remove_dev(rt2x00dev);
+	rt2x00soc_free_reg(rt2x00dev);
+	ieee80211_free_hw(hw);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_remove);
+
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	return rt2x00lib_suspend(rt2x00dev, state);
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_suspend);
+
+int rt2x00soc_resume(struct platform_device *pdev)
+{
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	return rt2x00lib_resume(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_resume);
+#endif /* CONFIG_PM */
+
+/*
+ * rt2x00soc module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 soc library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
new file mode 100644
index 0000000..8a34166
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -0,0 +1,52 @@
+/*
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00soc
+	Abstract: Data structures for the rt2x00soc module.
+ */
+
+#ifndef RT2X00SOC_H
+#define RT2X00SOC_H
+
+#define KSEG1ADDR(__ptr) __ptr
+
+#define __rt2x00soc_probe(__chipset, __ops) \
+static int __rt2x00soc_probe(struct platform_device *pdev) \
+{ \
+	return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
+}
+
+/*
+ * SoC driver handlers.
+ */
+int rt2x00soc_probe(struct platform_device *pdev,
+		    const unsigned short chipset,
+		    const struct rt2x00_ops *ops);
+int rt2x00soc_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
+int rt2x00soc_resume(struct platform_device *pdev);
+#else
+#define rt2x00soc_suspend	NULL
+#define rt2x00soc_resume	NULL
+#endif /* CONFIG_PM */
+
+#endif /* RT2X00SOC_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index f02b48a..0a751e7 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -160,7 +160,7 @@
 
 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 			   const unsigned int offset,
-			   struct rt2x00_field32 field,
+			   const struct rt2x00_field32 field,
 			   u32 *reg)
 {
 	unsigned int i;
@@ -653,6 +653,8 @@
 	rt2x00dev->ops = ops;
 	rt2x00dev->hw = hw;
 
+	rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
+
 	retval = rt2x00usb_alloc_reg(rt2x00dev);
 	if (retval)
 		goto exit_free_device;
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index bd2d59c..3da6841 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -26,6 +26,8 @@
 #ifndef RT2X00USB_H
 #define RT2X00USB_H
 
+#include <linux/usb.h>
+
 #define to_usb_device_intf(d) \
 ({ \
 	struct usb_interface *intf = to_usb_interface(d); \
@@ -39,17 +41,11 @@
 #define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
 
 /*
- * Register defines.
- * Some registers require multiple attempts before success,
- * in those cases REGISTER_BUSY_COUNT attempts should be
- * taken with a REGISTER_BUSY_DELAY interval.
  * For USB vendor requests we need to pass a timeout
  * time in ms, for this we use the REGISTER_TIMEOUT,
  * however when loading firmware a higher value is
  * required. In that case we use the REGISTER_TIMEOUT_FIRMWARE.
  */
-#define REGISTER_BUSY_COUNT		5
-#define REGISTER_BUSY_DELAY		100
 #define REGISTER_TIMEOUT		500
 #define REGISTER_TIMEOUT_FIRMWARE	1000
 
@@ -232,7 +228,7 @@
 }
 
 /**
- * rt2x00usb_regbusy_read - Read 32bit register word
+ * rt2x00usb_register_read - Read 32bit register word
  * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
  * @offset: Register offset
  * @value: Pointer to where register contents should be stored
@@ -340,12 +336,13 @@
  * through rt2x00usb_vendor_request_buff().
  */
 static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-					       const unsigned int offset,
-					       void *value, const u32 length)
+						 const unsigned int offset,
+						 const void *value,
+						 const u32 length)
 {
 	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
 				      USB_VENDOR_REQUEST_OUT, offset,
-				      value, length,
+				      (void *)value, length,
 				      REGISTER_TIMEOUT32(length));
 }
 
@@ -364,7 +361,7 @@
  */
 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
 			   const unsigned int offset,
-			   struct rt2x00_field32 field,
+			   const struct rt2x00_field32 field,
 			   u32 *reg);
 
 /*
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index b20e3ea..687e17d 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -51,7 +51,7 @@
  * These indirect registers work with busy bits,
  * and we will try maximal REGISTER_BUSY_COUNT times to access
  * the register while taking a REGISTER_BUSY_DELAY us delay
- * between each attampt. When the busy bit is still set at that time,
+ * between each attempt. When the busy bit is still set at that time,
  * the access attempt is considered to have failed,
  * and we will print an error.
  */
@@ -386,7 +386,7 @@
 		 * The driver does not support the IV/EIV generation
 		 * in hardware. However it doesn't support the IV/EIV
 		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
+		 * to be provided separately for the descriptor.
 		 * rt2x00lib will cut the IV/EIV data out of all frames
 		 * given to us by mac80211, but we must tell mac80211
 		 * to generate the IV/EIV data.
@@ -397,7 +397,7 @@
 	/*
 	 * SEC_CSR0 contains only single-bit fields to indicate
 	 * a particular key is valid. Because using the FIELD32()
-	 * defines directly will cause a lot of overhead we use
+	 * defines directly will cause a lot of overhead, we use
 	 * a calculation to determine the correct bit directly.
 	 */
 	mask = 1 << key->hw_key_idx;
@@ -425,11 +425,11 @@
 		/*
 		 * rt2x00lib can't determine the correct free
 		 * key_idx for pairwise keys. We have 2 registers
-		 * with key valid bits. The goal is simple, read
-		 * the first register, if that is full move to
+		 * with key valid bits. The goal is simple: read
+		 * the first register. If that is full, move to
 		 * the next register.
-		 * When both registers are full, we drop the key,
-		 * otherwise we use the first invalid entry.
+		 * When both registers are full, we drop the key.
+		 * Otherwise, we use the first invalid entry.
 		 */
 		rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
 		if (reg && reg == ~0) {
@@ -464,8 +464,8 @@
 					      &addr_entry, sizeof(addr_entry));
 
 		/*
-		 * Enable pairwise lookup table for given BSS idx,
-		 * without this received frames will not be decrypted
+		 * Enable pairwise lookup table for given BSS idx.
+		 * Without this, received frames will not be decrypted
 		 * by the hardware.
 		 */
 		rt2x00pci_register_read(rt2x00dev, SEC_CSR4, &reg);
@@ -487,7 +487,7 @@
 	/*
 	 * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
 	 * a particular key is valid. Because using the FIELD32()
-	 * defines directly will cause a lot of overhead we use
+	 * defines directly will cause a lot of overhead, we use
 	 * a calculation to determine the correct bit directly.
 	 */
 	if (key->hw_key_idx < 32) {
@@ -556,7 +556,7 @@
 	if (flags & CONFIG_UPDATE_TYPE) {
 		/*
 		 * Clear current synchronisation setup.
-		 * For the Beacon base registers we only need to clear
+		 * For the Beacon base registers, we only need to clear
 		 * the first byte since that byte contains the VALID and OWNER
 		 * bits which (when set to 0) will invalidate the entire beacon.
 		 */
@@ -1168,8 +1168,8 @@
 		return FW_BAD_LENGTH;
 
 	/*
-	 * The last 2 bytes in the firmware array are the crc checksum itself,
-	 * this means that we should never pass those 2 bytes to the crc
+	 * The last 2 bytes in the firmware array are the crc checksum itself.
+	 * This means that we should never pass those 2 bytes to the crc
 	 * algorithm.
 	 */
 	fw_crc = (data[len - 2] << 8 | data[len - 1]);
@@ -1986,7 +1986,7 @@
 
 		/*
 		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
+		 * decryption. It has provided the data separately but rt2x00lib
 		 * should decide if it should be reinserted.
 		 */
 		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
@@ -2042,7 +2042,7 @@
 	 * During each loop we will compare the freshly read
 	 * STA_CSR4 register value with the value read from
 	 * the previous loop. If the 2 values are equal then
-	 * we should stop processing because the chance it
+	 * we should stop processing because the chance is
 	 * quite big that the device has been unplugged and
 	 * we risk going into an endless loop.
 	 */
@@ -2300,6 +2300,7 @@
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip_rf(rt2x00dev, value, reg);
+	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
 	    !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
@@ -2330,7 +2331,7 @@
 		__set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
 
 	/*
-	 * Detect if this device has an hardware controlled radio.
+	 * Detect if this device has a hardware controlled radio.
 	 */
 	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
@@ -2355,7 +2356,7 @@
 		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 
 	/*
-	 * When working with a RF2529 chip without double antenna
+	 * When working with a RF2529 chip without double antenna,
 	 * the antenna settings should be gathered from the NIC
 	 * eeprom word.
 	 */
@@ -2545,7 +2546,6 @@
 	    IEEE80211_HW_SIGNAL_DBM |
 	    IEEE80211_HW_SUPPORTS_PS |
 	    IEEE80211_HW_PS_NULLFUNC_STACK;
-	rt2x00dev->hw->extra_tx_headroom = 0;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -2668,7 +2668,7 @@
 
 	/*
 	 * We only need to perform additional register initialization
-	 * for WMM queues/
+	 * for WMM queues.
 	 */
 	if (queue_idx >= 4)
 		return 0;
@@ -2787,19 +2787,20 @@
 };
 
 static const struct rt2x00_ops rt61pci_ops = {
-	.name		= KBUILD_MODNAME,
-	.max_sta_intf	= 1,
-	.max_ap_intf	= 4,
-	.eeprom_size	= EEPROM_SIZE,
-	.rf_size	= RF_SIZE,
-	.tx_queues	= NUM_TX_QUEUES,
-	.rx		= &rt61pci_queue_rx,
-	.tx		= &rt61pci_queue_tx,
-	.bcn		= &rt61pci_queue_bcn,
-	.lib		= &rt61pci_rt2x00_ops,
-	.hw		= &rt61pci_mac80211_ops,
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 4,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= 0,
+	.rx			= &rt61pci_queue_rx,
+	.tx			= &rt61pci_queue_tx,
+	.bcn			= &rt61pci_queue_bcn,
+	.lib			= &rt61pci_rt2x00_ops,
+	.hw			= &rt61pci_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt61pci_rt2x00debug,
+	.debugfs		= &rt61pci_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 93eb699..6f33f7f 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 14e7bb21..ced3b6a 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
@@ -1825,6 +1825,7 @@
 	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
 	rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
+	rt2x00_print_chip(rt2x00dev);
 
 	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0x25730) ||
 	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
@@ -2068,7 +2069,6 @@
 	    IEEE80211_HW_SIGNAL_DBM |
 	    IEEE80211_HW_SUPPORTS_PS |
 	    IEEE80211_HW_PS_NULLFUNC_STACK;
-	rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
 
 	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
 	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
@@ -2305,19 +2305,20 @@
 };
 
 static const struct rt2x00_ops rt73usb_ops = {
-	.name		= KBUILD_MODNAME,
-	.max_sta_intf	= 1,
-	.max_ap_intf	= 4,
-	.eeprom_size	= EEPROM_SIZE,
-	.rf_size	= RF_SIZE,
-	.tx_queues	= NUM_TX_QUEUES,
-	.rx		= &rt73usb_queue_rx,
-	.tx		= &rt73usb_queue_tx,
-	.bcn		= &rt73usb_queue_bcn,
-	.lib		= &rt73usb_rt2x00_ops,
-	.hw		= &rt73usb_mac80211_ops,
+	.name			= KBUILD_MODNAME,
+	.max_sta_intf		= 1,
+	.max_ap_intf		= 4,
+	.eeprom_size		= EEPROM_SIZE,
+	.rf_size		= RF_SIZE,
+	.tx_queues		= NUM_TX_QUEUES,
+	.extra_tx_headroom	= TXD_DESC_SIZE,
+	.rx			= &rt73usb_queue_rx,
+	.tx			= &rt73usb_queue_tx,
+	.bcn			= &rt73usb_queue_bcn,
+	.lib			= &rt73usb_rt2x00_ops,
+	.hw			= &rt73usb_mac80211_ops,
 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
-	.debugfs	= &rt73usb_rt2x00debug,
+	.debugfs		= &rt73usb_rt2x00debug,
 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 };
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 81fe0be..e783a09 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -1,5 +1,5 @@
 /*
-	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
 	<http://rt2x00.serialmonkey.com>
 
 	This program is free software; you can redistribute it and/or modify
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 16429c4..a1a3dd1 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -548,7 +548,7 @@
 	rtl818x_iowrite32(priv, &priv->map->TNPDA, priv->tx_ring[1].dma);
 	rtl818x_iowrite32(priv, &priv->map->TLPDA, priv->tx_ring[0].dma);
 
-	ret = request_irq(priv->pdev->irq, &rtl8180_interrupt,
+	ret = request_irq(priv->pdev->irq, rtl8180_interrupt,
 			  IRQF_SHARED, KBUILD_MODNAME, dev);
 	if (ret) {
 		printk(KERN_ERR "%s: failed to register IRQ handler\n",
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index bf9175a..abb4907 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -119,7 +119,6 @@
 	} hw_rev;
 	struct sk_buff_head rx_queue;
 	u8 signal;
-	u8 quality;
 	u8 noise;
 	u8 slot_time;
 	u8 aifsn[4];
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 2017ccc..76973b8 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -320,7 +320,6 @@
 	struct ieee80211_rx_status rx_status = { 0 };
 	int rate, signal;
 	u32 flags;
-	u32 quality;
 	unsigned long f;
 
 	spin_lock_irqsave(&priv->rx_queue.lock, f);
@@ -338,10 +337,9 @@
 			(typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
 		flags = le32_to_cpu(hdr->flags);
 		/* As with the RTL8187B below, the AGC is used to calculate
-		 * signal strength and quality. In this case, the scaling
+		 * signal strength. In this case, the scaling
 		 * constants are derived from the output of p54usb.
 		 */
-		quality = 130 - ((41 * hdr->agc) >> 6);
 		signal = -4 - ((27 * hdr->agc) >> 6);
 		rx_status.antenna = (hdr->signal >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
@@ -354,23 +352,18 @@
 		 * In testing, none of these quantities show qualitative
 		 * agreement with AP signal strength, except for the AGC,
 		 * which is inversely proportional to the strength of the
-		 * signal. In the following, the quality and signal strength
-		 * are derived from the AGC. The arbitrary scaling constants
+		 * signal. In the following, the signal strength
+		 * is derived from the AGC. The arbitrary scaling constants
 		 * are chosen to make the results close to the values obtained
 		 * for a BCM4312 using b43 as the driver. The noise is ignored
 		 * for now.
 		 */
 		flags = le32_to_cpu(hdr->flags);
-		quality = 170 - hdr->agc;
 		signal = 14 - hdr->agc / 2;
 		rx_status.antenna = (hdr->rssi >> 7) & 1;
 		rx_status.mactime = le64_to_cpu(hdr->mac_time);
 	}
 
-	if (quality > 100)
-		quality = 100;
-	rx_status.qual = quality;
-	priv->quality = quality;
 	rx_status.signal = signal;
 	priv->signal = signal;
 	rate = (flags >> 20) & 0xF;
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
deleted file mode 100644
index ea6a87c..0000000
--- a/drivers/net/wireless/strip.c
+++ /dev/null
@@ -1,2805 +0,0 @@
-/*
- * Copyright 1996 The Board of Trustees of The Leland Stanford
- * Junior University. All Rights Reserved.
- *
- * Permission to use, copy, modify, and distribute this
- * software and its documentation for any purpose and without
- * fee is hereby granted, provided that the above copyright
- * notice appear in all copies.  Stanford University
- * makes no representations about the suitability of this
- * software for any purpose.  It is provided "as is" without
- * express or implied warranty.
- *
- * strip.c	This module implements Starmode Radio IP (STRIP)
- *		for kernel-based devices like TTY.  It interfaces between a
- *		raw TTY, and the kernel's INET protocol layers (via DDI).
- *
- * Version:	@(#)strip.c	1.3	July 1997
- *
- * Author:	Stuart Cheshire <cheshire@cs.stanford.edu>
- *
- * Fixes:	v0.9 12th Feb 1996 (SC)
- *		New byte stuffing (2+6 run-length encoding)
- *		New watchdog timer task
- *		New Protocol key (SIP0)
- *		
- *		v0.9.1 3rd March 1996 (SC)
- *		Changed to dynamic device allocation -- no more compile
- *		time (or boot time) limit on the number of STRIP devices.
- *		
- *		v0.9.2 13th March 1996 (SC)
- *		Uses arp cache lookups (but doesn't send arp packets yet)
- *		
- *		v0.9.3 17th April 1996 (SC)
- *		Fixed bug where STR_ERROR flag was getting set unneccessarily
- *		(causing otherwise good packets to be unneccessarily dropped)
- *		
- *		v0.9.4 27th April 1996 (SC)
- *		First attempt at using "&COMMAND" Starmode AT commands
- *		
- *		v0.9.5 29th May 1996 (SC)
- *		First attempt at sending (unicast) ARP packets
- *		
- *		v0.9.6 5th June 1996 (Elliot)
- *		Put "message level" tags in every "printk" statement
- *		
- *		v0.9.7 13th June 1996 (laik)
- *		Added support for the /proc fs
- *
- *              v0.9.8 July 1996 (Mema)
- *              Added packet logging
- *
- *              v1.0 November 1996 (SC)
- *              Fixed (severe) memory leaks in the /proc fs code
- *              Fixed race conditions in the logging code
- *
- *              v1.1 January 1997 (SC)
- *              Deleted packet logging (use tcpdump instead)
- *              Added support for Metricom Firmware v204 features
- *              (like message checksums)
- *
- *              v1.2 January 1997 (SC)
- *              Put portables list back in
- *
- *              v1.3 July 1997 (SC)
- *              Made STRIP driver set the radio's baud rate automatically.
- *              It is no longer necessarily to manually set the radio's
- *              rate permanently to 115200 -- the driver handles setting
- *              the rate automatically.
- */
-
-#ifdef MODULE
-static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR";
-#else
-static const char StripVersion[] = "1.3A-STUART.CHESHIRE";
-#endif
-
-#define TICKLE_TIMERS 0
-#define EXT_COUNTERS 1
-
-
-/************************************************************************/
-/* Header files								*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-# include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/tty.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/if_strip.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/rcupdate.h>
-#include <net/arp.h>
-#include <net/net_namespace.h>
-
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/time.h>
-#include <linux/jiffies.h>
-
-/************************************************************************/
-/* Useful structures and definitions					*/
-
-/*
- * A MetricomKey identifies the protocol being carried inside a Metricom
- * Starmode packet.
- */
-
-typedef union {
-	__u8 c[4];
-	__u32 l;
-} MetricomKey;
-
-/*
- * An IP address can be viewed as four bytes in memory (which is what it is) or as
- * a single 32-bit long (which is convenient for assignment, equality testing etc.)
- */
-
-typedef union {
-	__u8 b[4];
-	__u32 l;
-} IPaddr;
-
-/*
- * A MetricomAddressString is used to hold a printable representation of
- * a Metricom address.
- */
-
-typedef struct {
-	__u8 c[24];
-} MetricomAddressString;
-
-/* Encapsulation can expand packet of size x to 65/64x + 1
- * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>"
- *                           1 1   1-18  1  4         ?         1
- * eg.                     <CR>*0000-1234*SIP0<encaps payload><CR>
- * We allow 31 bytes for the stars, the key, the address and the <CR>s
- */
-#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L)
-
-/*
- * A STRIP_Header is never really sent over the radio, but making a dummy
- * header for internal use within the kernel that looks like an Ethernet
- * header makes certain other software happier. For example, tcpdump
- * already understands Ethernet headers.
- */
-
-typedef struct {
-	MetricomAddress dst_addr;	/* Destination address, e.g. "0000-1234"   */
-	MetricomAddress src_addr;	/* Source address, e.g. "0000-5678"        */
-	unsigned short protocol;	/* The protocol type, using Ethernet codes */
-} STRIP_Header;
-
-typedef struct {
-	char c[60];
-} MetricomNode;
-
-#define NODE_TABLE_SIZE 32
-typedef struct {
-	struct timeval timestamp;
-	int num_nodes;
-	MetricomNode node[NODE_TABLE_SIZE];
-} MetricomNodeTable;
-
-enum { FALSE = 0, TRUE = 1 };
-
-/*
- * Holds the radio's firmware version.
- */
-typedef struct {
-	char c[50];
-} FirmwareVersion;
-
-/*
- * Holds the radio's serial number.
- */
-typedef struct {
-	char c[18];
-} SerialNumber;
-
-/*
- * Holds the radio's battery voltage.
- */
-typedef struct {
-	char c[11];
-} BatteryVoltage;
-
-typedef struct {
-	char c[8];
-} char8;
-
-enum {
-	NoStructure = 0,	/* Really old firmware */
-	StructuredMessages = 1,	/* Parsable AT response msgs */
-	ChecksummedMessages = 2	/* Parsable AT response msgs with checksums */
-};
-
-struct strip {
-	int magic;
-	/*
-	 * These are pointers to the malloc()ed frame buffers.
-	 */
-
-	unsigned char *rx_buff;	/* buffer for received IP packet */
-	unsigned char *sx_buff;	/* buffer for received serial data */
-	int sx_count;		/* received serial data counter */
-	int sx_size;		/* Serial buffer size           */
-	unsigned char *tx_buff;	/* transmitter buffer           */
-	unsigned char *tx_head;	/* pointer to next byte to XMIT */
-	int tx_left;		/* bytes left in XMIT queue     */
-	int tx_size;		/* Serial buffer size           */
-
-	/*
-	 * STRIP interface statistics.
-	 */
-
-	unsigned long rx_packets;	/* inbound frames counter       */
-	unsigned long tx_packets;	/* outbound frames counter      */
-	unsigned long rx_errors;	/* Parity, etc. errors          */
-	unsigned long tx_errors;	/* Planned stuff                */
-	unsigned long rx_dropped;	/* No memory for skb            */
-	unsigned long tx_dropped;	/* When MTU change              */
-	unsigned long rx_over_errors;	/* Frame bigger than STRIP buf. */
-
-	unsigned long pps_timer;	/* Timer to determine pps       */
-	unsigned long rx_pps_count;	/* Counter to determine pps     */
-	unsigned long tx_pps_count;	/* Counter to determine pps     */
-	unsigned long sx_pps_count;	/* Counter to determine pps     */
-	unsigned long rx_average_pps;	/* rx packets per second * 8    */
-	unsigned long tx_average_pps;	/* tx packets per second * 8    */
-	unsigned long sx_average_pps;	/* sent packets per second * 8  */
-
-#ifdef EXT_COUNTERS
-	unsigned long rx_bytes;		/* total received bytes */
-	unsigned long tx_bytes;		/* total received bytes */
-	unsigned long rx_rbytes;	/* bytes thru radio i/f */
-	unsigned long tx_rbytes;	/* bytes thru radio i/f */
-	unsigned long rx_sbytes;	/* tot bytes thru serial i/f */
-	unsigned long tx_sbytes;	/* tot bytes thru serial i/f */
-	unsigned long rx_ebytes;	/* tot stat/err bytes */
-	unsigned long tx_ebytes;	/* tot stat/err bytes */
-#endif
-
-	/*
-	 * Internal variables.
-	 */
-
-	struct list_head  list;		/* Linked list of devices */
-
-	int discard;			/* Set if serial error          */
-	int working;			/* Is radio working correctly?  */
-	int firmware_level;		/* Message structuring level    */
-	int next_command;		/* Next periodic command        */
-	unsigned int user_baud;		/* The user-selected baud rate  */
-	int mtu;			/* Our mtu (to spot changes!)   */
-	long watchdog_doprobe;		/* Next time to test the radio  */
-	long watchdog_doreset;		/* Time to do next reset        */
-	long gratuitous_arp;		/* Time to send next ARP refresh */
-	long arp_interval;		/* Next ARP interval            */
-	struct timer_list idle_timer;	/* For periodic wakeup calls    */
-	MetricomAddress true_dev_addr;	/* True address of radio        */
-	int manual_dev_addr;		/* Hack: See note below         */
-
-	FirmwareVersion firmware_version;	/* The radio's firmware version */
-	SerialNumber serial_number;	/* The radio's serial number    */
-	BatteryVoltage battery_voltage;	/* The radio's battery voltage  */
-
-	/*
-	 * Other useful structures.
-	 */
-
-	struct tty_struct *tty;		/* ptr to TTY structure         */
-	struct net_device *dev;		/* Our device structure         */
-
-	/*
-	 * Neighbour radio records
-	 */
-
-	MetricomNodeTable portables;
-	MetricomNodeTable poletops;
-};
-
-/*
- * Note: manual_dev_addr hack
- * 
- * It is not possible to change the hardware address of a Metricom radio,
- * or to send packets with a user-specified hardware source address, thus
- * trying to manually set a hardware source address is a questionable
- * thing to do.  However, if the user *does* manually set the hardware
- * source address of a STRIP interface, then the kernel will believe it,
- * and use it in certain places. For example, the hardware address listed
- * by ifconfig will be the manual address, not the true one.
- * (Both addresses are listed in /proc/net/strip.)
- * Also, ARP packets will be sent out giving the user-specified address as
- * the source address, not the real address. This is dangerous, because
- * it means you won't receive any replies -- the ARP replies will go to
- * the specified address, which will be some other radio. The case where
- * this is useful is when that other radio is also connected to the same
- * machine. This allows you to connect a pair of radios to one machine,
- * and to use one exclusively for inbound traffic, and the other
- * exclusively for outbound traffic. Pretty neat, huh?
- * 
- * Here's the full procedure to set this up:
- * 
- * 1. "slattach" two interfaces, e.g. st0 for outgoing packets,
- *    and st1 for incoming packets
- * 
- * 2. "ifconfig" st0 (outbound radio) to have the hardware address
- *    which is the real hardware address of st1 (inbound radio).
- *    Now when it sends out packets, it will masquerade as st1, and
- *    replies will be sent to that radio, which is exactly what we want.
- * 
- * 3. Set the route table entry ("route add default ..." or
- *    "route add -net ...", as appropriate) to send packets via the st0
- *    interface (outbound radio). Do not add any route which sends packets
- *    out via the st1 interface -- that radio is for inbound traffic only.
- * 
- * 4. "ifconfig" st1 (inbound radio) to have hardware address zero.
- *    This tells the STRIP driver to "shut down" that interface and not
- *    send any packets through it. In particular, it stops sending the
- *    periodic gratuitous ARP packets that a STRIP interface normally sends.
- *    Also, when packets arrive on that interface, it will search the
- *    interface list to see if there is another interface who's manual
- *    hardware address matches its own real address (i.e. st0 in this
- *    example) and if so it will transfer ownership of the skbuff to
- *    that interface, so that it looks to the kernel as if the packet
- *    arrived on that interface. This is necessary because when the
- *    kernel sends an ARP packet on st0, it expects to get a reply on
- *    st0, and if it sees the reply come from st1 then it will ignore
- *    it (to be accurate, it puts the entry in the ARP table, but
- *    labelled in such a way that st0 can't use it).
- * 
- * Thanks to Petros Maniatis for coming up with the idea of splitting
- * inbound and outbound traffic between two interfaces, which turned
- * out to be really easy to implement, even if it is a bit of a hack.
- * 
- * Having set a manual address on an interface, you can restore it
- * to automatic operation (where the address is automatically kept
- * consistent with the real address of the radio) by setting a manual
- * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF"
- * This 'turns off' manual override mode for the device address.
- * 
- * Note: The IEEE 802 headers reported in tcpdump will show the *real*
- * radio addresses the packets were sent and received from, so that you
- * can see what is really going on with packets, and which interfaces
- * they are really going through.
- */
-
-
-/************************************************************************/
-/* Constants								*/
-
-/*
- * CommandString1 works on all radios
- * Other CommandStrings are only used with firmware that provides structured responses.
- * 
- * ats319=1 Enables Info message for node additions and deletions
- * ats319=2 Enables Info message for a new best node
- * ats319=4 Enables checksums
- * ats319=8 Enables ACK messages
- */
-
-static const int MaxCommandStringLength = 32;
-static const int CompatibilityCommand = 1;
-
-static const char CommandString0[] = "*&COMMAND*ATS319=7";	/* Turn on checksums & info messages */
-static const char CommandString1[] = "*&COMMAND*ATS305?";	/* Query radio name */
-static const char CommandString2[] = "*&COMMAND*ATS325?";	/* Query battery voltage */
-static const char CommandString3[] = "*&COMMAND*ATS300?";	/* Query version information */
-static const char CommandString4[] = "*&COMMAND*ATS311?";	/* Query poletop list */
-static const char CommandString5[] = "*&COMMAND*AT~LA";		/* Query portables list */
-typedef struct {
-	const char *string;
-	long length;
-} StringDescriptor;
-
-static const StringDescriptor CommandString[] = {
-	{CommandString0, sizeof(CommandString0) - 1},
-	{CommandString1, sizeof(CommandString1) - 1},
-	{CommandString2, sizeof(CommandString2) - 1},
-	{CommandString3, sizeof(CommandString3) - 1},
-	{CommandString4, sizeof(CommandString4) - 1},
-	{CommandString5, sizeof(CommandString5) - 1}
-};
-
-#define GOT_ALL_RADIO_INFO(S)      \
-    ((S)->firmware_version.c[0] && \
-     (S)->battery_voltage.c[0]  && \
-     memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address)))
-
-static const char hextable[16] = "0123456789ABCDEF";
-
-static const MetricomAddress zero_address;
-static const MetricomAddress broadcast_address =
-    { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };
-
-static const MetricomKey SIP0Key = { "SIP0" };
-static const MetricomKey ARP0Key = { "ARP0" };
-static const MetricomKey ATR_Key = { "ATR " };
-static const MetricomKey ACK_Key = { "ACK_" };
-static const MetricomKey INF_Key = { "INF_" };
-static const MetricomKey ERR_Key = { "ERR_" };
-
-static const long MaxARPInterval = 60 * HZ;	/* One minute */
-
-/*
- * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for
- * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion
- * for STRIP encoding, that translates to a maximum payload MTU of 1155.
- * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes
- * long, including IP header, UDP header, and NFS header. Setting the STRIP
- * MTU to 1152 allows us to send default sized NFS packets without fragmentation.
- */
-static const unsigned short MAX_SEND_MTU = 1152;
-static const unsigned short MAX_RECV_MTU = 1500;	/* Hoping for Ethernet sized packets in the future! */
-static const unsigned short DEFAULT_STRIP_MTU = 1152;
-static const int STRIP_MAGIC = 0x5303;
-static const long LongTime = 0x7FFFFFFF;
-
-/************************************************************************/
-/* Global variables							*/
-
-static LIST_HEAD(strip_list);
-static DEFINE_SPINLOCK(strip_lock);
-
-/************************************************************************/
-/* Macros								*/
-
-/* Returns TRUE if text T begins with prefix P */
-#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1))
-
-/* Returns TRUE if text T of length L is equal to string S */
-#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1))
-
-#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' :      \
-                    (X)>='a' && (X)<='f' ? (X)-'a'+10 :   \
-                    (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 )
-
-#define READHEX16(X) ((__u16)(READHEX(X)))
-
-#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0)
-
-#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
-
-#define JIFFIE_TO_SEC(X) ((X) / HZ)
-
-
-/************************************************************************/
-/* Utility routines							*/
-
-static int arp_query(unsigned char *haddr, u32 paddr,
-		     struct net_device *dev)
-{
-	struct neighbour *neighbor_entry;
-	int ret = 0;
-
-	neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev);
-
-	if (neighbor_entry != NULL) {
-		neighbor_entry->used = jiffies;
-		if (neighbor_entry->nud_state & NUD_VALID) {
-			memcpy(haddr, neighbor_entry->ha, dev->addr_len);
-			ret = 1;
-		}
-		neigh_release(neighbor_entry);
-	}
-	return ret;
-}
-
-static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr,
-		     __u8 * end)
-{
-	static const int MAX_DumpData = 80;
-	__u8 pkt_text[MAX_DumpData], *p = pkt_text;
-
-	*p++ = '\"';
-
-	while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) {
-		if (*ptr == '\\') {
-			*p++ = '\\';
-			*p++ = '\\';
-		} else {
-			if (*ptr >= 32 && *ptr <= 126) {
-				*p++ = *ptr;
-			} else {
-				sprintf(p, "\\%02X", *ptr);
-				p += 3;
-			}
-		}
-		ptr++;
-	}
-
-	if (ptr == end)
-		*p++ = '\"';
-	*p++ = 0;
-
-	printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text);
-}
-
-
-/************************************************************************/
-/* Byte stuffing/unstuffing routines					*/
-
-/* Stuffing scheme:
- * 00    Unused (reserved character)
- * 01-3F Run of 2-64 different characters
- * 40-7F Run of 1-64 different characters plus a single zero at the end
- * 80-BF Run of 1-64 of the same character
- * C0-FF Run of 1-64 zeroes (ASCII 0)
- */
-
-typedef enum {
-	Stuff_Diff = 0x00,
-	Stuff_DiffZero = 0x40,
-	Stuff_Same = 0x80,
-	Stuff_Zero = 0xC0,
-	Stuff_NoCode = 0xFF,	/* Special code, meaning no code selected */
-
-	Stuff_CodeMask = 0xC0,
-	Stuff_CountMask = 0x3F,
-	Stuff_MaxCount = 0x3F,
-	Stuff_Magic = 0x0D	/* The value we are eliminating */
-} StuffingCode;
-
-/* StuffData encodes the data starting at "src" for "length" bytes.
- * It writes it to the buffer pointed to by "dst" (which must be at least
- * as long as 1 + 65/64 of the input length). The output may be up to 1.6%
- * larger than the input for pathological input, but will usually be smaller.
- * StuffData returns the new value of the dst pointer as its result.
- * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state
- * between calls, allowing an encoded packet to be incrementally built up
- * from small parts. On the first call, the "__u8 *" pointed to should be
- * initialized to NULL; between subsequent calls the calling routine should
- * leave the value alone and simply pass it back unchanged so that the
- * encoder can recover its current state.
- */
-
-#define StuffData_FinishBlock(X) \
-(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode)
-
-static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst,
-		       __u8 ** code_ptr_ptr)
-{
-	__u8 *end = src + length;
-	__u8 *code_ptr = *code_ptr_ptr;
-	__u8 code = Stuff_NoCode, count = 0;
-
-	if (!length)
-		return (dst);
-
-	if (code_ptr) {
-		/*
-		 * Recover state from last call, if applicable
-		 */
-		code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask;
-		count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask;
-	}
-
-	while (src < end) {
-		switch (code) {
-			/* Stuff_NoCode: If no current code, select one */
-		case Stuff_NoCode:
-			/* Record where we're going to put this code */
-			code_ptr = dst++;
-			count = 0;	/* Reset the count (zero means one instance) */
-			/* Tentatively start a new block */
-			if (*src == 0) {
-				code = Stuff_Zero;
-				src++;
-			} else {
-				code = Stuff_Same;
-				*dst++ = *src++ ^ Stuff_Magic;
-			}
-			/* Note: We optimistically assume run of same -- */
-			/* which will be fixed later in Stuff_Same */
-			/* if it turns out not to be true. */
-			break;
-
-			/* Stuff_Zero: We already have at least one zero encoded */
-		case Stuff_Zero:
-			/* If another zero, count it, else finish this code block */
-			if (*src == 0) {
-				count++;
-				src++;
-			} else {
-				StuffData_FinishBlock(Stuff_Zero + count);
-			}
-			break;
-
-			/* Stuff_Same: We already have at least one byte encoded */
-		case Stuff_Same:
-			/* If another one the same, count it */
-			if ((*src ^ Stuff_Magic) == code_ptr[1]) {
-				count++;
-				src++;
-				break;
-			}
-			/* else, this byte does not match this block. */
-			/* If we already have two or more bytes encoded, finish this code block */
-			if (count) {
-				StuffData_FinishBlock(Stuff_Same + count);
-				break;
-			}
-			/* else, we only have one so far, so switch to Stuff_Diff code */
-			code = Stuff_Diff;
-			/* and fall through to Stuff_Diff case below
-			 * Note cunning cleverness here: case Stuff_Diff compares 
-			 * the current character with the previous two to see if it
-			 * has a run of three the same. Won't this be an error if
-			 * there aren't two previous characters stored to compare with?
-			 * No. Because we know the current character is *not* the same
-			 * as the previous one, the first test below will necessarily
-			 * fail and the send half of the "if" won't be executed.
-			 */
-
-			/* Stuff_Diff: We have at least two *different* bytes encoded */
-		case Stuff_Diff:
-			/* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */
-			if (*src == 0) {
-				StuffData_FinishBlock(Stuff_DiffZero +
-						      count);
-			}
-			/* else, if we have three in a row, it is worth starting a Stuff_Same block */
-			else if ((*src ^ Stuff_Magic) == dst[-1]
-				 && dst[-1] == dst[-2]) {
-				/* Back off the last two characters we encoded */
-				code += count - 2;
-				/* Note: "Stuff_Diff + 0" is an illegal code */
-				if (code == Stuff_Diff + 0) {
-					code = Stuff_Same + 0;
-				}
-				StuffData_FinishBlock(code);
-				code_ptr = dst - 2;
-				/* dst[-1] already holds the correct value */
-				count = 2;	/* 2 means three bytes encoded */
-				code = Stuff_Same;
-			}
-			/* else, another different byte, so add it to the block */
-			else {
-				*dst++ = *src ^ Stuff_Magic;
-				count++;
-			}
-			src++;	/* Consume the byte */
-			break;
-		}
-		if (count == Stuff_MaxCount) {
-			StuffData_FinishBlock(code + count);
-		}
-	}
-	if (code == Stuff_NoCode) {
-		*code_ptr_ptr = NULL;
-	} else {
-		*code_ptr_ptr = code_ptr;
-		StuffData_FinishBlock(code + count);
-	}
-	return (dst);
-}
-
-/*
- * UnStuffData decodes the data at "src", up to (but not including) "end".
- * It writes the decoded data into the buffer pointed to by "dst", up to a
- * maximum of "dst_length", and returns the new value of "src" so that a
- * follow-on call can read more data, continuing from where the first left off.
- * 
- * There are three types of results:
- * 1. The source data runs out before extracting "dst_length" bytes:
- *    UnStuffData returns NULL to indicate failure.
- * 2. The source data produces exactly "dst_length" bytes:
- *    UnStuffData returns new_src = end to indicate that all bytes were consumed.
- * 3. "dst_length" bytes are extracted, with more remaining.
- *    UnStuffData returns new_src < end to indicate that there are more bytes
- *    to be read.
- * 
- * Note: The decoding may be destructive, in that it may alter the source
- * data in the process of decoding it (this is necessary to allow a follow-on
- * call to resume correctly).
- */
-
-static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst,
-			 __u32 dst_length)
-{
-	__u8 *dst_end = dst + dst_length;
-	/* Sanity check */
-	if (!src || !end || !dst || !dst_length)
-		return (NULL);
-	while (src < end && dst < dst_end) {
-		int count = (*src ^ Stuff_Magic) & Stuff_CountMask;
-		switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) {
-		case Stuff_Diff:
-			if (src + 1 + count >= end)
-				return (NULL);
-			do {
-				*dst++ = *++src ^ Stuff_Magic;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				src += 1;
-			else {
-				if (count == 0)
-					*src = Stuff_Same ^ Stuff_Magic;
-				else
-					*src =
-					    (Stuff_Diff +
-					     count) ^ Stuff_Magic;
-			}
-			break;
-		case Stuff_DiffZero:
-			if (src + 1 + count >= end)
-				return (NULL);
-			do {
-				*dst++ = *++src ^ Stuff_Magic;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				*src = Stuff_Zero ^ Stuff_Magic;
-			else
-				*src =
-				    (Stuff_DiffZero + count) ^ Stuff_Magic;
-			break;
-		case Stuff_Same:
-			if (src + 1 >= end)
-				return (NULL);
-			do {
-				*dst++ = src[1] ^ Stuff_Magic;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				src += 2;
-			else
-				*src = (Stuff_Same + count) ^ Stuff_Magic;
-			break;
-		case Stuff_Zero:
-			do {
-				*dst++ = 0;
-			}
-			while (--count >= 0 && dst < dst_end);
-			if (count < 0)
-				src += 1;
-			else
-				*src = (Stuff_Zero + count) ^ Stuff_Magic;
-			break;
-		}
-	}
-	if (dst < dst_end)
-		return (NULL);
-	else
-		return (src);
-}
-
-
-/************************************************************************/
-/* General routines for STRIP						*/
-
-/*
- * set_baud sets the baud rate to the rate defined by baudcode
- */
-static void set_baud(struct tty_struct *tty, speed_t baudrate)
-{
-	struct ktermios old_termios;
-
-	mutex_lock(&tty->termios_mutex);
-	old_termios =*(tty->termios);
-	tty_encode_baud_rate(tty, baudrate, baudrate);
-	tty->ops->set_termios(tty, &old_termios);
-	mutex_unlock(&tty->termios_mutex);
-}
-
-/*
- * Convert a string to a Metricom Address.
- */
-
-#define IS_RADIO_ADDRESS(p) (                                                 \
-  isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \
-  (p)[4] == '-' &&                                                            \
-  isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8])    )
-
-static int string_to_radio_address(MetricomAddress * addr, __u8 * p)
-{
-	if (!IS_RADIO_ADDRESS(p))
-		return (1);
-	addr->c[0] = 0;
-	addr->c[1] = 0;
-	addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]);
-	addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]);
-	addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]);
-	addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]);
-	return (0);
-}
-
-/*
- * Convert a Metricom Address to a string.
- */
-
-static __u8 *radio_address_to_string(const MetricomAddress * addr,
-				     MetricomAddressString * p)
-{
-	sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3],
-		addr->c[4], addr->c[5]);
-	return (p->c);
-}
-
-/*
- * Note: Must make sure sx_size is big enough to receive a stuffed
- * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's
- * big enough to receive a large radio neighbour list (currently 4K).
- */
-
-static int allocate_buffers(struct strip *strip_info, int mtu)
-{
-	struct net_device *dev = strip_info->dev;
-	int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096);
-	int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength;
-	__u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC);
-	__u8 *s = kmalloc(sx_size, GFP_ATOMIC);
-	__u8 *t = kmalloc(tx_size, GFP_ATOMIC);
-	if (r && s && t) {
-		strip_info->rx_buff = r;
-		strip_info->sx_buff = s;
-		strip_info->tx_buff = t;
-		strip_info->sx_size = sx_size;
-		strip_info->tx_size = tx_size;
-		strip_info->mtu = dev->mtu = mtu;
-		return (1);
-	}
-	kfree(r);
-	kfree(s);
-	kfree(t);
-	return (0);
-}
-
-/*
- * MTU has been changed by the IP layer. 
- * We could be in
- * an upcall from the tty driver, or in an ip packet queue.
- */
-static int strip_change_mtu(struct net_device *dev, int new_mtu)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	int old_mtu = strip_info->mtu;
-	unsigned char *orbuff = strip_info->rx_buff;
-	unsigned char *osbuff = strip_info->sx_buff;
-	unsigned char *otbuff = strip_info->tx_buff;
-
-	if (new_mtu > MAX_SEND_MTU) {
-		printk(KERN_ERR
-		       "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
-		       strip_info->dev->name, MAX_SEND_MTU);
-		return -EINVAL;
-	}
-
-	spin_lock_bh(&strip_lock);
-	if (!allocate_buffers(strip_info, new_mtu)) {
-		printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n",
-		       strip_info->dev->name);
-		spin_unlock_bh(&strip_lock);
-		return -ENOMEM;
-	}
-
-	if (strip_info->sx_count) {
-		if (strip_info->sx_count <= strip_info->sx_size)
-			memcpy(strip_info->sx_buff, osbuff,
-			       strip_info->sx_count);
-		else {
-			strip_info->discard = strip_info->sx_count;
-			strip_info->rx_over_errors++;
-		}
-	}
-
-	if (strip_info->tx_left) {
-		if (strip_info->tx_left <= strip_info->tx_size)
-			memcpy(strip_info->tx_buff, strip_info->tx_head,
-			       strip_info->tx_left);
-		else {
-			strip_info->tx_left = 0;
-			strip_info->tx_dropped++;
-		}
-	}
-	strip_info->tx_head = strip_info->tx_buff;
-	spin_unlock_bh(&strip_lock);
-
-	printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
-	       strip_info->dev->name, old_mtu, strip_info->mtu);
-
-	kfree(orbuff);
-	kfree(osbuff);
-	kfree(otbuff);
-	return 0;
-}
-
-static void strip_unlock(struct strip *strip_info)
-{
-	/*
-	 * Set the timer to go off in one second.
-	 */
-	strip_info->idle_timer.expires = jiffies + 1 * HZ;
-	add_timer(&strip_info->idle_timer);
-	netif_wake_queue(strip_info->dev);
-}
-
-
-
-/*
- * If the time is in the near future, time_delta prints the number of
- * seconds to go into the buffer and returns the address of the buffer.
- * If the time is not in the near future, it returns the address of the
- * string "Not scheduled" The buffer must be long enough to contain the
- * ascii representation of the number plus 9 charactes for the " seconds"
- * and the null character.
- */
-#ifdef CONFIG_PROC_FS
-static char *time_delta(char buffer[], long time)
-{
-	time -= jiffies;
-	if (time > LongTime / 2)
-		return ("Not scheduled");
-	if (time < 0)
-		time = 0;	/* Don't print negative times */
-	sprintf(buffer, "%ld seconds", time / HZ);
-	return (buffer);
-}
-
-/* get Nth element of the linked list */
-static struct strip *strip_get_idx(loff_t pos) 
-{
-	struct strip *str;
-	int i = 0;
-
-	list_for_each_entry_rcu(str, &strip_list, list) {
-		if (pos == i)
-			return str;
-		++i;
-	}
-	return NULL;
-}
-
-static void *strip_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(RCU)
-{
-	rcu_read_lock();
-	return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN;
-}
-
-static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct list_head *l;
-	struct strip *s;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return strip_get_idx(1);
-
-	s = v;
-	l = &s->list;
-	list_for_each_continue_rcu(l, &strip_list) {
-		return list_entry(l, struct strip, list);
-	}
-	return NULL;
-}
-
-static void strip_seq_stop(struct seq_file *seq, void *v)
-	__releases(RCU)
-{
-	rcu_read_unlock();
-}
-
-static void strip_seq_neighbours(struct seq_file *seq,
-			   const MetricomNodeTable * table,
-			   const char *title)
-{
-	/* We wrap this in a do/while loop, so if the table changes */
-	/* while we're reading it, we just go around and try again. */
-	struct timeval t;
-
-	do {
-		int i;
-		t = table->timestamp;
-		if (table->num_nodes)
-			seq_printf(seq, "\n %s\n", title);
-		for (i = 0; i < table->num_nodes; i++) {
-			MetricomNode node;
-
-			spin_lock_bh(&strip_lock);
-			node = table->node[i];
-			spin_unlock_bh(&strip_lock);
-			seq_printf(seq, "  %s\n", node.c);
-		}
-	} while (table->timestamp.tv_sec != t.tv_sec
-		 || table->timestamp.tv_usec != t.tv_usec);
-}
-
-/*
- * This function prints radio status information via the seq_file
- * interface.  The interface takes care of buffer size and over
- * run issues. 
- *
- * The buffer in seq_file is PAGESIZE (4K) 
- * so this routine should never print more or it will get truncated.
- * With the maximum of 32 portables and 32 poletops
- * reported, the routine outputs 3107 bytes into the buffer.
- */
-static void strip_seq_status_info(struct seq_file *seq, 
-				  const struct strip *strip_info)
-{
-	char temp[32];
-	MetricomAddressString addr_string;
-
-	/* First, we must copy all of our data to a safe place, */
-	/* in case a serial interrupt comes in and changes it.  */
-	int tx_left = strip_info->tx_left;
-	unsigned long rx_average_pps = strip_info->rx_average_pps;
-	unsigned long tx_average_pps = strip_info->tx_average_pps;
-	unsigned long sx_average_pps = strip_info->sx_average_pps;
-	int working = strip_info->working;
-	int firmware_level = strip_info->firmware_level;
-	long watchdog_doprobe = strip_info->watchdog_doprobe;
-	long watchdog_doreset = strip_info->watchdog_doreset;
-	long gratuitous_arp = strip_info->gratuitous_arp;
-	long arp_interval = strip_info->arp_interval;
-	FirmwareVersion firmware_version = strip_info->firmware_version;
-	SerialNumber serial_number = strip_info->serial_number;
-	BatteryVoltage battery_voltage = strip_info->battery_voltage;
-	char *if_name = strip_info->dev->name;
-	MetricomAddress true_dev_addr = strip_info->true_dev_addr;
-	MetricomAddress dev_dev_addr =
-	    *(MetricomAddress *) strip_info->dev->dev_addr;
-	int manual_dev_addr = strip_info->manual_dev_addr;
-#ifdef EXT_COUNTERS
-	unsigned long rx_bytes = strip_info->rx_bytes;
-	unsigned long tx_bytes = strip_info->tx_bytes;
-	unsigned long rx_rbytes = strip_info->rx_rbytes;
-	unsigned long tx_rbytes = strip_info->tx_rbytes;
-	unsigned long rx_sbytes = strip_info->rx_sbytes;
-	unsigned long tx_sbytes = strip_info->tx_sbytes;
-	unsigned long rx_ebytes = strip_info->rx_ebytes;
-	unsigned long tx_ebytes = strip_info->tx_ebytes;
-#endif
-
-	seq_printf(seq, "\nInterface name\t\t%s\n", if_name);
-	seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No");
-	radio_address_to_string(&true_dev_addr, &addr_string);
-	seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c);
-	if (manual_dev_addr) {
-		radio_address_to_string(&dev_dev_addr, &addr_string);
-		seq_printf(seq, " Device address:\t%s\n", addr_string.c);
-	}
-	seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" :
-		     !firmware_level ? "Should be upgraded" :
-		     firmware_version.c);
-	if (firmware_level >= ChecksummedMessages)
-		seq_printf(seq, " (Checksums Enabled)");
-	seq_printf(seq, "\n");
-	seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c);
-	seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c);
-	seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left);
-	seq_printf(seq, " Receive packet rate:   %ld packets per second\n",
-		     rx_average_pps / 8);
-	seq_printf(seq, " Transmit packet rate:  %ld packets per second\n",
-		     tx_average_pps / 8);
-	seq_printf(seq, " Sent packet rate:      %ld packets per second\n",
-		     sx_average_pps / 8);
-	seq_printf(seq, " Next watchdog probe:\t%s\n",
-		     time_delta(temp, watchdog_doprobe));
-	seq_printf(seq, " Next watchdog reset:\t%s\n",
-		     time_delta(temp, watchdog_doreset));
-	seq_printf(seq, " Next gratuitous ARP:\t");
-
-	if (!memcmp
-	    (strip_info->dev->dev_addr, zero_address.c,
-	     sizeof(zero_address)))
-		seq_printf(seq, "Disabled\n");
-	else {
-		seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp));
-		seq_printf(seq, " Next ARP interval:\t%ld seconds\n",
-			     JIFFIE_TO_SEC(arp_interval));
-	}
-
-	if (working) {
-#ifdef EXT_COUNTERS
-		seq_printf(seq, "\n");
-		seq_printf(seq,
-			     " Total bytes:         \trx:\t%lu\ttx:\t%lu\n",
-			     rx_bytes, tx_bytes);
-		seq_printf(seq,
-			     "  thru radio:         \trx:\t%lu\ttx:\t%lu\n",
-			     rx_rbytes, tx_rbytes);
-		seq_printf(seq,
-			     "  thru serial port:   \trx:\t%lu\ttx:\t%lu\n",
-			     rx_sbytes, tx_sbytes);
-		seq_printf(seq,
-			     " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n",
-			     rx_ebytes, tx_ebytes);
-#endif
-		strip_seq_neighbours(seq, &strip_info->poletops,
-					"Poletops:");
-		strip_seq_neighbours(seq, &strip_info->portables,
-					"Portables:");
-	}
-}
-
-/*
- * This function is exports status information from the STRIP driver through
- * the /proc file system.
- */
-static int strip_seq_show(struct seq_file *seq, void *v)
-{
-	if (v == SEQ_START_TOKEN)
-		seq_printf(seq, "strip_version: %s\n", StripVersion);
-	else
-		strip_seq_status_info(seq, (const struct strip *)v);
-	return 0;
-}
-
-
-static const struct seq_operations strip_seq_ops = {
-	.start = strip_seq_start,
-	.next  = strip_seq_next,
-	.stop  = strip_seq_stop,
-	.show  = strip_seq_show,
-};
-
-static int strip_seq_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &strip_seq_ops);
-}
-
-static const struct file_operations strip_seq_fops = {
-	.owner	 = THIS_MODULE,
-	.open    = strip_seq_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release,
-};
-#endif
-
-
-
-/************************************************************************/
-/* Sending routines							*/
-
-static void ResetRadio(struct strip *strip_info)
-{
-	struct tty_struct *tty = strip_info->tty;
-	static const char init[] = "ate0q1dt**starmode\r**";
-	StringDescriptor s = { init, sizeof(init) - 1 };
-
-	/* 
-	 * If the radio isn't working anymore,
-	 * we should clear the old status information.
-	 */
-	if (strip_info->working) {
-		printk(KERN_INFO "%s: No response: Resetting radio.\n",
-		       strip_info->dev->name);
-		strip_info->firmware_version.c[0] = '\0';
-		strip_info->serial_number.c[0] = '\0';
-		strip_info->battery_voltage.c[0] = '\0';
-		strip_info->portables.num_nodes = 0;
-		do_gettimeofday(&strip_info->portables.timestamp);
-		strip_info->poletops.num_nodes = 0;
-		do_gettimeofday(&strip_info->poletops.timestamp);
-	}
-
-	strip_info->pps_timer = jiffies;
-	strip_info->rx_pps_count = 0;
-	strip_info->tx_pps_count = 0;
-	strip_info->sx_pps_count = 0;
-	strip_info->rx_average_pps = 0;
-	strip_info->tx_average_pps = 0;
-	strip_info->sx_average_pps = 0;
-
-	/* Mark radio address as unknown */
-	*(MetricomAddress *) & strip_info->true_dev_addr = zero_address;
-	if (!strip_info->manual_dev_addr)
-		*(MetricomAddress *) strip_info->dev->dev_addr =
-		    zero_address;
-	strip_info->working = FALSE;
-	strip_info->firmware_level = NoStructure;
-	strip_info->next_command = CompatibilityCommand;
-	strip_info->watchdog_doprobe = jiffies + 10 * HZ;
-	strip_info->watchdog_doreset = jiffies + 1 * HZ;
-
-	/* If the user has selected a baud rate above 38.4 see what magic we have to do */
-	if (strip_info->user_baud > 38400) {
-		/*
-		 * Subtle stuff: Pay attention :-)
-		 * If the serial port is currently at the user's selected (>38.4) rate,
-		 * then we temporarily switch to 19.2 and issue the ATS304 command
-		 * to tell the radio to switch to the user's selected rate.
-		 * If the serial port is not currently at that rate, that means we just
-		 * issued the ATS304 command last time through, so this time we restore
-		 * the user's selected rate and issue the normal starmode reset string.
-		 */
-		if (strip_info->user_baud == tty_get_baud_rate(tty)) {
-			static const char b0[] = "ate0q1s304=57600\r";
-			static const char b1[] = "ate0q1s304=115200\r";
-			static const StringDescriptor baudstring[2] =
-			    { {b0, sizeof(b0) - 1}
-			, {b1, sizeof(b1) - 1}
-			};
-			set_baud(tty, 19200);
-			if (strip_info->user_baud == 57600)
-				s = baudstring[0];
-			else if (strip_info->user_baud == 115200)
-				s = baudstring[1];
-			else
-				s = baudstring[1];	/* For now */
-		} else
-			set_baud(tty, strip_info->user_baud);
-	}
-
-	tty->ops->write(tty, s.string, s.length);
-#ifdef EXT_COUNTERS
-	strip_info->tx_ebytes += s.length;
-#endif
-}
-
-/*
- * Called by the driver when there's room for more data.  If we have
- * more packets to send, we send them here.
- */
-
-static void strip_write_some_more(struct tty_struct *tty)
-{
-	struct strip *strip_info = tty->disc_data;
-
-	/* First make sure we're connected. */
-	if (!strip_info || strip_info->magic != STRIP_MAGIC ||
-	    !netif_running(strip_info->dev))
-		return;
-
-	if (strip_info->tx_left > 0) {
-		int num_written =
-		    tty->ops->write(tty, strip_info->tx_head,
-				      strip_info->tx_left);
-		strip_info->tx_left -= num_written;
-		strip_info->tx_head += num_written;
-#ifdef EXT_COUNTERS
-		strip_info->tx_sbytes += num_written;
-#endif
-	} else {		/* Else start transmission of another packet */
-
-		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-		strip_unlock(strip_info);
-	}
-}
-
-static __u8 *add_checksum(__u8 * buffer, __u8 * end)
-{
-	__u16 sum = 0;
-	__u8 *p = buffer;
-	while (p < end)
-		sum += *p++;
-	end[3] = hextable[sum & 0xF];
-	sum >>= 4;
-	end[2] = hextable[sum & 0xF];
-	sum >>= 4;
-	end[1] = hextable[sum & 0xF];
-	sum >>= 4;
-	end[0] = hextable[sum & 0xF];
-	return (end + 4);
-}
-
-static unsigned char *strip_make_packet(unsigned char *buffer,
-					struct strip *strip_info,
-					struct sk_buff *skb)
-{
-	__u8 *ptr = buffer;
-	__u8 *stuffstate = NULL;
-	STRIP_Header *header = (STRIP_Header *) skb->data;
-	MetricomAddress haddr = header->dst_addr;
-	int len = skb->len - sizeof(STRIP_Header);
-	MetricomKey key;
-
-	/*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */
-
-	if (header->protocol == htons(ETH_P_IP))
-		key = SIP0Key;
-	else if (header->protocol == htons(ETH_P_ARP))
-		key = ARP0Key;
-	else {
-		printk(KERN_ERR
-		       "%s: strip_make_packet: Unknown packet type 0x%04X\n",
-		       strip_info->dev->name, ntohs(header->protocol));
-		return (NULL);
-	}
-
-	if (len > strip_info->mtu) {
-		printk(KERN_ERR
-		       "%s: Dropping oversized transmit packet: %d bytes\n",
-		       strip_info->dev->name, len);
-		return (NULL);
-	}
-
-	/*
-	 * If we're sending to ourselves, discard the packet.
-	 * (Metricom radios choke if they try to send a packet to their own address.)
-	 */
-	if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) {
-		printk(KERN_ERR "%s: Dropping packet addressed to self\n",
-		       strip_info->dev->name);
-		return (NULL);
-	}
-
-	/*
-	 * If this is a broadcast packet, send it to our designated Metricom
-	 * 'broadcast hub' radio (First byte of address being 0xFF means broadcast)
-	 */
-	if (haddr.c[0] == 0xFF) {
-		__be32 brd = 0;
-		struct in_device *in_dev;
-
-		rcu_read_lock();
-		in_dev = __in_dev_get_rcu(strip_info->dev);
-		if (in_dev == NULL) {
-			rcu_read_unlock();
-			return NULL;
-		}
-		if (in_dev->ifa_list)
-			brd = in_dev->ifa_list->ifa_broadcast;
-		rcu_read_unlock();
-
-		/* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
-		if (!arp_query(haddr.c, brd, strip_info->dev)) {
-			printk(KERN_ERR
-			       "%s: Unable to send packet (no broadcast hub configured)\n",
-			       strip_info->dev->name);
-			return (NULL);
-		}
-		/*
-		 * If we are the broadcast hub, don't bother sending to ourselves.
-		 * (Metricom radios choke if they try to send a packet to their own address.)
-		 */
-		if (!memcmp
-		    (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr)))
-			return (NULL);
-	}
-
-	*ptr++ = 0x0D;
-	*ptr++ = '*';
-	*ptr++ = hextable[haddr.c[2] >> 4];
-	*ptr++ = hextable[haddr.c[2] & 0xF];
-	*ptr++ = hextable[haddr.c[3] >> 4];
-	*ptr++ = hextable[haddr.c[3] & 0xF];
-	*ptr++ = '-';
-	*ptr++ = hextable[haddr.c[4] >> 4];
-	*ptr++ = hextable[haddr.c[4] & 0xF];
-	*ptr++ = hextable[haddr.c[5] >> 4];
-	*ptr++ = hextable[haddr.c[5] & 0xF];
-	*ptr++ = '*';
-	*ptr++ = key.c[0];
-	*ptr++ = key.c[1];
-	*ptr++ = key.c[2];
-	*ptr++ = key.c[3];
-
-	ptr =
-	    StuffData(skb->data + sizeof(STRIP_Header), len, ptr,
-		      &stuffstate);
-
-	if (strip_info->firmware_level >= ChecksummedMessages)
-		ptr = add_checksum(buffer + 1, ptr);
-
-	*ptr++ = 0x0D;
-	return (ptr);
-}
-
-static void strip_send(struct strip *strip_info, struct sk_buff *skb)
-{
-	MetricomAddress haddr;
-	unsigned char *ptr = strip_info->tx_buff;
-	int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0;
-	int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0
-	    && !doreset;
-	__be32 addr, brd;
-
-	/*
-	 * 1. If we have a packet, encapsulate it and put it in the buffer
-	 */
-	if (skb) {
-		char *newptr = strip_make_packet(ptr, strip_info, skb);
-		strip_info->tx_pps_count++;
-		if (!newptr)
-			strip_info->tx_dropped++;
-		else {
-			ptr = newptr;
-			strip_info->sx_pps_count++;
-			strip_info->tx_packets++;	/* Count another successful packet */
-#ifdef EXT_COUNTERS
-			strip_info->tx_bytes += skb->len;
-			strip_info->tx_rbytes += ptr - strip_info->tx_buff;
-#endif
-			/*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */
-			/*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */
-		}
-	}
-
-	/*
-	 * 2. If it is time for another tickle, tack it on, after the packet
-	 */
-	if (doprobe) {
-		StringDescriptor ts = CommandString[strip_info->next_command];
-#if TICKLE_TIMERS
-		{
-			struct timeval tv;
-			do_gettimeofday(&tv);
-			printk(KERN_INFO "**** Sending tickle string %d      at %02d.%06d\n",
-			       strip_info->next_command, tv.tv_sec % 100,
-			       tv.tv_usec);
-		}
-#endif
-		if (ptr == strip_info->tx_buff)
-			*ptr++ = 0x0D;
-
-		*ptr++ = '*';	/* First send "**" to provoke an error message */
-		*ptr++ = '*';
-
-		/* Then add the command */
-		memcpy(ptr, ts.string, ts.length);
-
-		/* Add a checksum ? */
-		if (strip_info->firmware_level < ChecksummedMessages)
-			ptr += ts.length;
-		else
-			ptr = add_checksum(ptr, ptr + ts.length);
-
-		*ptr++ = 0x0D;	/* Terminate the command with a <CR> */
-
-		/* Cycle to next periodic command? */
-		if (strip_info->firmware_level >= StructuredMessages)
-			if (++strip_info->next_command >=
-			    ARRAY_SIZE(CommandString))
-				strip_info->next_command = 0;
-#ifdef EXT_COUNTERS
-		strip_info->tx_ebytes += ts.length;
-#endif
-		strip_info->watchdog_doprobe = jiffies + 10 * HZ;
-		strip_info->watchdog_doreset = jiffies + 1 * HZ;
-		/*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
-	}
-
-	/*
-	 * 3. Set up the strip_info ready to send the data (if any).
-	 */
-	strip_info->tx_head = strip_info->tx_buff;
-	strip_info->tx_left = ptr - strip_info->tx_buff;
-	set_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags);
-	/*
-	 * 4. Debugging check to make sure we're not overflowing the buffer.
-	 */
-	if (strip_info->tx_size - strip_info->tx_left < 20)
-		printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n",
-		       strip_info->dev->name, strip_info->tx_left,
-		       strip_info->tx_size - strip_info->tx_left);
-
-	/*
-	 * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in
-	 * the buffer, strip_write_some_more will send it after the reset has finished
-	 */
-	if (doreset) {
-		ResetRadio(strip_info);
-		return;
-	}
-
-	if (1) {
-		struct in_device *in_dev;
-
-		brd = addr = 0;
-		rcu_read_lock();
-		in_dev = __in_dev_get_rcu(strip_info->dev);
-		if (in_dev) {
-			if (in_dev->ifa_list) {
-				brd = in_dev->ifa_list->ifa_broadcast;
-				addr = in_dev->ifa_list->ifa_local;
-			}
-		}
-		rcu_read_unlock();
-	}
-
-
-	/*
-	 * 6. If it is time for a periodic ARP, queue one up to be sent.
-	 * We only do this if:
-	 *  1. The radio is working
-	 *  2. It's time to send another periodic ARP
-	 *  3. We really know what our address is (and it is not manually set to zero)
-	 *  4. We have a designated broadcast address configured
-	 * If we queue up an ARP packet when we don't have a designated broadcast
-	 * address configured, then the packet will just have to be discarded in
-	 * strip_make_packet. This is not fatal, but it causes misleading information
-	 * to be displayed in tcpdump. tcpdump will report that periodic APRs are
-	 * being sent, when in fact they are not, because they are all being dropped
-	 * in the strip_make_packet routine.
-	 */
-	if (strip_info->working
-	    && (long) jiffies - strip_info->gratuitous_arp >= 0
-	    && memcmp(strip_info->dev->dev_addr, zero_address.c,
-		      sizeof(zero_address))
-	    && arp_query(haddr.c, brd, strip_info->dev)) {
-		/*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
-		   strip_info->dev->name, strip_info->arp_interval / HZ); */
-		strip_info->gratuitous_arp =
-		    jiffies + strip_info->arp_interval;
-		strip_info->arp_interval *= 2;
-		if (strip_info->arp_interval > MaxARPInterval)
-			strip_info->arp_interval = MaxARPInterval;
-		if (addr)
-			arp_send(ARPOP_REPLY, ETH_P_ARP, addr,	/* Target address of ARP packet is our address */
-				 strip_info->dev,	/* Device to send packet on */
-				 addr,	/* Source IP address this ARP packet comes from */
-				 NULL,	/* Destination HW address is NULL (broadcast it) */
-				 strip_info->dev->dev_addr,	/* Source HW address is our HW address */
-				 strip_info->dev->dev_addr);	/* Target HW address is our HW address (redundant) */
-	}
-
-	/*
-	 * 7. All ready. Start the transmission
-	 */
-	strip_write_some_more(strip_info->tty);
-}
-
-/* Encapsulate a datagram and kick it into a TTY queue. */
-static netdev_tx_t strip_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-
-	if (!netif_running(dev)) {
-		printk(KERN_ERR "%s: xmit call when iface is down\n",
-		       dev->name);
-		return NETDEV_TX_BUSY;
-	}
-
-	netif_stop_queue(dev);
-
-	del_timer(&strip_info->idle_timer);
-
-
-	if (time_after(jiffies, strip_info->pps_timer + HZ)) {
-		unsigned long t = jiffies - strip_info->pps_timer;
-		unsigned long rx_pps_count =
-			DIV_ROUND_CLOSEST(strip_info->rx_pps_count*HZ*8, t);
-		unsigned long tx_pps_count =
-			DIV_ROUND_CLOSEST(strip_info->tx_pps_count*HZ*8, t);
-		unsigned long sx_pps_count =
-			DIV_ROUND_CLOSEST(strip_info->sx_pps_count*HZ*8, t);
-
-		strip_info->pps_timer = jiffies;
-		strip_info->rx_pps_count = 0;
-		strip_info->tx_pps_count = 0;
-		strip_info->sx_pps_count = 0;
-
-		strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2;
-		strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2;
-		strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2;
-
-		if (rx_pps_count / 8 >= 10)
-			printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n",
-			       strip_info->dev->name, rx_pps_count / 8);
-		if (tx_pps_count / 8 >= 10)
-			printk(KERN_INFO "%s: WARNING: Tx        %ld packets per second.\n",
-			       strip_info->dev->name, tx_pps_count / 8);
-		if (sx_pps_count / 8 >= 10)
-			printk(KERN_INFO "%s: WARNING: Sending   %ld packets per second.\n",
-			       strip_info->dev->name, sx_pps_count / 8);
-	}
-
-	spin_lock_bh(&strip_lock);
-
-	strip_send(strip_info, skb);
-
-	spin_unlock_bh(&strip_lock);
-
-	if (skb)
-		dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-/*
- * IdleTask periodically calls strip_xmit, so even when we have no IP packets
- * to send for an extended period of time, the watchdog processing still gets
- * done to ensure that the radio stays in Starmode
- */
-
-static void strip_IdleTask(unsigned long parameter)
-{
-	strip_xmit(NULL, (struct net_device *) parameter);
-}
-
-/*
- * Create the MAC header for an arbitrary protocol layer
- *
- * saddr!=NULL        means use this specific address (n/a for Metricom)
- * saddr==NULL        means use default device source address
- * daddr!=NULL        means use this destination address
- * daddr==NULL        means leave destination address alone
- *                 (e.g. unresolved arp -- kernel will call
- *                 rebuild_header later to fill in the address)
- */
-
-static int strip_header(struct sk_buff *skb, struct net_device *dev,
-			unsigned short type, const void *daddr,
-			const void *saddr, unsigned len)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header));
-
-	/*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type,
-	   type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */
-
-	header->src_addr = strip_info->true_dev_addr;
-	header->protocol = htons(type);
-
-	/*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */
-
-	if (!daddr)
-		return (-dev->hard_header_len);
-
-	header->dst_addr = *(MetricomAddress *) daddr;
-	return (dev->hard_header_len);
-}
-
-/*
- * Rebuild the MAC header. This is called after an ARP
- * (or in future other address resolution) has completed on this
- * sk_buff. We now let ARP fill in the other fields.
- * I think this should return zero if packet is ready to send,
- * or non-zero if it needs more time to do an address lookup
- */
-
-static int strip_rebuild_header(struct sk_buff *skb)
-{
-#ifdef CONFIG_INET
-	STRIP_Header *header = (STRIP_Header *) skb->data;
-
-	/* Arp find returns zero if if knows the address, */
-	/* or if it doesn't know the address it sends an ARP packet and returns non-zero */
-	return arp_find(header->dst_addr.c, skb) ? 1 : 0;
-#else
-	return 0;
-#endif
-}
-
-
-/************************************************************************/
-/* Receiving routines							*/
-
-/*
- * This function parses the response to the ATS300? command,
- * extracting the radio version and serial number.
- */
-static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	__u8 *p, *value_begin, *value_end;
-	int len;
-
-	/* Determine the beginning of the second line of the payload */
-	p = ptr;
-	while (p < end && *p != 10)
-		p++;
-	if (p >= end)
-		return;
-	p++;
-	value_begin = p;
-
-	/* Determine the end of line */
-	while (p < end && *p != 10)
-		p++;
-	if (p >= end)
-		return;
-	value_end = p;
-	p++;
-
-	len = value_end - value_begin;
-	len = min_t(int, len, sizeof(FirmwareVersion) - 1);
-	if (strip_info->firmware_version.c[0] == 0)
-		printk(KERN_INFO "%s: Radio Firmware: %.*s\n",
-		       strip_info->dev->name, len, value_begin);
-	sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin);
-
-	/* Look for the first colon */
-	while (p < end && *p != ':')
-		p++;
-	if (p >= end)
-		return;
-	/* Skip over the space */
-	p += 2;
-	len = sizeof(SerialNumber) - 1;
-	if (p + len <= end) {
-		sprintf(strip_info->serial_number.c, "%.*s", len, p);
-	} else {
-		printk(KERN_DEBUG
-		       "STRIP: radio serial number shorter (%zd) than expected (%d)\n",
-		       end - p, len);
-	}
-}
-
-/*
- * This function parses the response to the ATS325? command,
- * extracting the radio battery voltage.
- */
-static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	int len;
-
-	len = sizeof(BatteryVoltage) - 1;
-	if (ptr + len <= end) {
-		sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr);
-	} else {
-		printk(KERN_DEBUG
-		       "STRIP: radio voltage string shorter (%zd) than expected (%d)\n",
-		       end - ptr, len);
-	}
-}
-
-/*
- * This function parses the responses to the AT~LA and ATS311 commands,
- * which list the radio's neighbours.
- */
-static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end)
-{
-	table->num_nodes = 0;
-	while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) {
-		MetricomNode *node = &table->node[table->num_nodes++];
-		char *dst = node->c, *limit = dst + sizeof(*node) - 1;
-		while (ptr < end && *ptr <= 32)
-			ptr++;
-		while (ptr < end && dst < limit && *ptr != 10)
-			*dst++ = *ptr++;
-		*dst++ = 0;
-		while (ptr < end && ptr[-1] != 10)
-			ptr++;
-	}
-	do_gettimeofday(&table->timestamp);
-}
-
-static int get_radio_address(struct strip *strip_info, __u8 * p)
-{
-	MetricomAddress addr;
-
-	if (string_to_radio_address(&addr, p))
-		return (1);
-
-	/* See if our radio address has changed */
-	if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) {
-		MetricomAddressString addr_string;
-		radio_address_to_string(&addr, &addr_string);
-		printk(KERN_INFO "%s: Radio address = %s\n",
-		       strip_info->dev->name, addr_string.c);
-		strip_info->true_dev_addr = addr;
-		if (!strip_info->manual_dev_addr)
-			*(MetricomAddress *) strip_info->dev->dev_addr =
-			    addr;
-		/* Give the radio a few seconds to get its head straight, then send an arp */
-		strip_info->gratuitous_arp = jiffies + 15 * HZ;
-		strip_info->arp_interval = 1 * HZ;
-	}
-	return (0);
-}
-
-static int verify_checksum(struct strip *strip_info)
-{
-	__u8 *p = strip_info->sx_buff;
-	__u8 *end = strip_info->sx_buff + strip_info->sx_count - 4;
-	u_short sum =
-	    (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) |
-	    (READHEX16(end[2]) << 4) | (READHEX16(end[3]));
-	while (p < end)
-		sum -= *p++;
-	if (sum == 0 && strip_info->firmware_level == StructuredMessages) {
-		strip_info->firmware_level = ChecksummedMessages;
-		printk(KERN_INFO "%s: Radio provides message checksums\n",
-		       strip_info->dev->name);
-	}
-	return (sum == 0);
-}
-
-static void RecvErr(char *msg, struct strip *strip_info)
-{
-	__u8 *ptr = strip_info->sx_buff;
-	__u8 *end = strip_info->sx_buff + strip_info->sx_count;
-	DumpData(msg, strip_info, ptr, end);
-	strip_info->rx_errors++;
-}
-
-static void RecvErr_Message(struct strip *strip_info, __u8 * sendername,
-			    const __u8 * msg, u_long len)
-{
-	if (has_prefix(msg, len, "001")) {	/* Not in StarMode! */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_INFO "%s: Radio %s is not in StarMode\n",
-		       strip_info->dev->name, sendername);
-	}
-
-	else if (has_prefix(msg, len, "002")) {	/* Remap handle */
-		/* We ignore "Remap handle" messages for now */
-	}
-
-	else if (has_prefix(msg, len, "003")) {	/* Can't resolve name */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_INFO "%s: Destination radio name is unknown\n",
-		       strip_info->dev->name);
-	}
-
-	else if (has_prefix(msg, len, "004")) {	/* Name too small or missing */
-		strip_info->watchdog_doreset = jiffies + LongTime;
-#if TICKLE_TIMERS
-		{
-			struct timeval tv;
-			do_gettimeofday(&tv);
-			printk(KERN_INFO
-			       "**** Got ERR_004 response         at %02d.%06d\n",
-			       tv.tv_sec % 100, tv.tv_usec);
-		}
-#endif
-		if (!strip_info->working) {
-			strip_info->working = TRUE;
-			printk(KERN_INFO "%s: Radio now in starmode\n",
-			       strip_info->dev->name);
-			/*
-			 * If the radio has just entered a working state, we should do our first
-			 * probe ASAP, so that we find out our radio address etc. without delay.
-			 */
-			strip_info->watchdog_doprobe = jiffies;
-		}
-		if (strip_info->firmware_level == NoStructure && sendername) {
-			strip_info->firmware_level = StructuredMessages;
-			strip_info->next_command = 0;	/* Try to enable checksums ASAP */
-			printk(KERN_INFO
-			       "%s: Radio provides structured messages\n",
-			       strip_info->dev->name);
-		}
-		if (strip_info->firmware_level >= StructuredMessages) {
-			/*
-			 * If this message has a valid checksum on the end, then the call to verify_checksum
-			 * will elevate the firmware_level to ChecksummedMessages for us. (The actual return
-			 * code from verify_checksum is ignored here.)
-			 */
-			verify_checksum(strip_info);
-			/*
-			 * If the radio has structured messages but we don't yet have all our information about it,
-			 * we should do probes without delay, until we have gathered all the information
-			 */
-			if (!GOT_ALL_RADIO_INFO(strip_info))
-				strip_info->watchdog_doprobe = jiffies;
-		}
-	}
-
-	else if (has_prefix(msg, len, "005"))	/* Bad count specification */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "006"))	/* Header too big */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "007")) {	/* Body too big */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_ERR
-		       "%s: Error! Packet size too big for radio.\n",
-		       strip_info->dev->name);
-	}
-
-	else if (has_prefix(msg, len, "008")) {	/* Bad character in name */
-		RecvErr("Error Msg:", strip_info);
-		printk(KERN_ERR
-		       "%s: Radio name contains illegal character\n",
-		       strip_info->dev->name);
-	}
-
-	else if (has_prefix(msg, len, "009"))	/* No count or line terminator */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "010"))	/* Invalid checksum */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "011"))	/* Checksum didn't match */
-		RecvErr("Error Msg:", strip_info);
-
-	else if (has_prefix(msg, len, "012"))	/* Failed to transmit packet */
-		RecvErr("Error Msg:", strip_info);
-
-	else
-		RecvErr("Error Msg:", strip_info);
-}
-
-static void process_AT_response(struct strip *strip_info, __u8 * ptr,
-				__u8 * end)
-{
-	u_long len;
-	__u8 *p = ptr;
-	while (p < end && p[-1] != 10)
-		p++;		/* Skip past first newline character */
-	/* Now ptr points to the AT command, and p points to the text of the response. */
-	len = p - ptr;
-
-#if TICKLE_TIMERS
-	{
-		struct timeval tv;
-		do_gettimeofday(&tv);
-		printk(KERN_INFO "**** Got AT response %.7s      at %02d.%06d\n",
-		       ptr, tv.tv_sec % 100, tv.tv_usec);
-	}
-#endif
-
-	if (has_prefix(ptr, len, "ATS300?"))
-		get_radio_version(strip_info, p, end);
-	else if (has_prefix(ptr, len, "ATS305?"))
-		get_radio_address(strip_info, p);
-	else if (has_prefix(ptr, len, "ATS311?"))
-		get_radio_neighbours(&strip_info->poletops, p, end);
-	else if (has_prefix(ptr, len, "ATS319=7"))
-		verify_checksum(strip_info);
-	else if (has_prefix(ptr, len, "ATS325?"))
-		get_radio_voltage(strip_info, p, end);
-	else if (has_prefix(ptr, len, "AT~LA"))
-		get_radio_neighbours(&strip_info->portables, p, end);
-	else
-		RecvErr("Unknown AT Response:", strip_info);
-}
-
-static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	/* Currently we don't do anything with ACKs from the radio */
-}
-
-static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end)
-{
-	if (ptr + 16 > end)
-		RecvErr("Bad Info Msg:", strip_info);
-}
-
-static struct net_device *get_strip_dev(struct strip *strip_info)
-{
-	/* If our hardware address is *manually set* to zero, and we know our */
-	/* real radio hardware address, try to find another strip device that has been */
-	/* manually set to that address that we can 'transfer ownership' of this packet to  */
-	if (strip_info->manual_dev_addr &&
-	    !memcmp(strip_info->dev->dev_addr, zero_address.c,
-		    sizeof(zero_address))
-	    && memcmp(&strip_info->true_dev_addr, zero_address.c,
-		      sizeof(zero_address))) {
-		struct net_device *dev;
-		read_lock_bh(&dev_base_lock);
-		for_each_netdev(&init_net, dev) {
-			if (dev->type == strip_info->dev->type &&
-			    !memcmp(dev->dev_addr,
-				    &strip_info->true_dev_addr,
-				    sizeof(MetricomAddress))) {
-				printk(KERN_INFO
-				       "%s: Transferred packet ownership to %s.\n",
-				       strip_info->dev->name, dev->name);
-				read_unlock_bh(&dev_base_lock);
-				return (dev);
-			}
-		}
-		read_unlock_bh(&dev_base_lock);
-	}
-	return (strip_info->dev);
-}
-
-/*
- * Send one completely decapsulated datagram to the next layer.
- */
-
-static void deliver_packet(struct strip *strip_info, STRIP_Header * header,
-			   __u16 packetlen)
-{
-	struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen);
-	if (!skb) {
-		printk(KERN_ERR "%s: memory squeeze, dropping packet.\n",
-		       strip_info->dev->name);
-		strip_info->rx_dropped++;
-	} else {
-		memcpy(skb_put(skb, sizeof(STRIP_Header)), header,
-		       sizeof(STRIP_Header));
-		memcpy(skb_put(skb, packetlen), strip_info->rx_buff,
-		       packetlen);
-		skb->dev = get_strip_dev(strip_info);
-		skb->protocol = header->protocol;
-		skb_reset_mac_header(skb);
-
-		/* Having put a fake header on the front of the sk_buff for the */
-		/* benefit of tools like tcpdump, skb_pull now 'consumes' that  */
-		/* fake header before we hand the packet up to the next layer.  */
-		skb_pull(skb, sizeof(STRIP_Header));
-
-		/* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */
-		strip_info->rx_packets++;
-		strip_info->rx_pps_count++;
-#ifdef EXT_COUNTERS
-		strip_info->rx_bytes += packetlen;
-#endif
-		netif_rx(skb);
-	}
-}
-
-static void process_IP_packet(struct strip *strip_info,
-			      STRIP_Header * header, __u8 * ptr,
-			      __u8 * end)
-{
-	__u16 packetlen;
-
-	/* Decode start of the IP packet header */
-	ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4);
-	if (!ptr) {
-		RecvErr("IP Packet too short", strip_info);
-		return;
-	}
-
-	packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3];
-
-	if (packetlen > MAX_RECV_MTU) {
-		printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n",
-		       strip_info->dev->name, packetlen);
-		strip_info->rx_dropped++;
-		return;
-	}
-
-	/*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */
-
-	/* Decode remainder of the IP packet */
-	ptr =
-	    UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4);
-	if (!ptr) {
-		RecvErr("IP Packet too short", strip_info);
-		return;
-	}
-
-	if (ptr < end) {
-		RecvErr("IP Packet too long", strip_info);
-		return;
-	}
-
-	header->protocol = htons(ETH_P_IP);
-
-	deliver_packet(strip_info, header, packetlen);
-}
-
-static void process_ARP_packet(struct strip *strip_info,
-			       STRIP_Header * header, __u8 * ptr,
-			       __u8 * end)
-{
-	__u16 packetlen;
-	struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff;
-
-	/* Decode start of the ARP packet */
-	ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8);
-	if (!ptr) {
-		RecvErr("ARP Packet too short", strip_info);
-		return;
-	}
-
-	packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2;
-
-	if (packetlen > MAX_RECV_MTU) {
-		printk(KERN_INFO
-		       "%s: Dropping oversized received ARP packet: %d bytes\n",
-		       strip_info->dev->name, packetlen);
-		strip_info->rx_dropped++;
-		return;
-	}
-
-	/*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
-	   strip_info->dev->name, packetlen,
-	   ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */
-
-	/* Decode remainder of the ARP packet */
-	ptr =
-	    UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8);
-	if (!ptr) {
-		RecvErr("ARP Packet too short", strip_info);
-		return;
-	}
-
-	if (ptr < end) {
-		RecvErr("ARP Packet too long", strip_info);
-		return;
-	}
-
-	header->protocol = htons(ETH_P_ARP);
-
-	deliver_packet(strip_info, header, packetlen);
-}
-
-/*
- * process_text_message processes a <CR>-terminated block of data received
- * from the radio that doesn't begin with a '*' character. All normal
- * Starmode communication messages with the radio begin with a '*',
- * so any text that does not indicates a serial port error, a radio that
- * is in Hayes command mode instead of Starmode, or a radio with really
- * old firmware that doesn't frame its Starmode responses properly.
- */
-static void process_text_message(struct strip *strip_info)
-{
-	__u8 *msg = strip_info->sx_buff;
-	int len = strip_info->sx_count;
-
-	/* Check for anything that looks like it might be our radio name */
-	/* (This is here for backwards compatibility with old firmware)  */
-	if (len == 9 && get_radio_address(strip_info, msg) == 0)
-		return;
-
-	if (text_equal(msg, len, "OK"))
-		return;		/* Ignore 'OK' responses from prior commands */
-	if (text_equal(msg, len, "ERROR"))
-		return;		/* Ignore 'ERROR' messages */
-	if (has_prefix(msg, len, "ate0q1"))
-		return;		/* Ignore character echo back from the radio */
-
-	/* Catch other error messages */
-	/* (This is here for backwards compatibility with old firmware) */
-	if (has_prefix(msg, len, "ERR_")) {
-		RecvErr_Message(strip_info, NULL, &msg[4], len - 4);
-		return;
-	}
-
-	RecvErr("No initial *", strip_info);
-}
-
-/*
- * process_message processes a <CR>-terminated block of data received
- * from the radio. If the radio is not in Starmode or has old firmware,
- * it may be a line of text in response to an AT command. Ideally, with
- * a current radio that's properly in Starmode, all data received should
- * be properly framed and checksummed radio message blocks, containing
- * either a starmode packet, or a other communication from the radio
- * firmware, like "INF_" Info messages and &COMMAND responses.
- */
-static void process_message(struct strip *strip_info)
-{
-	STRIP_Header header = { zero_address, zero_address, 0 };
-	__u8 *ptr = strip_info->sx_buff;
-	__u8 *end = strip_info->sx_buff + strip_info->sx_count;
-	__u8 sendername[32], *sptr = sendername;
-	MetricomKey key;
-
-	/*HexDump("Receiving", strip_info, ptr, end); */
-
-	/* Check for start of address marker, and then skip over it */
-	if (*ptr == '*')
-		ptr++;
-	else {
-		process_text_message(strip_info);
-		return;
-	}
-
-	/* Copy out the return address */
-	while (ptr < end && *ptr != '*'
-	       && sptr < ARRAY_END(sendername) - 1)
-		*sptr++ = *ptr++;
-	*sptr = 0;		/* Null terminate the sender name */
-
-	/* Check for end of address marker, and skip over it */
-	if (ptr >= end || *ptr != '*') {
-		RecvErr("No second *", strip_info);
-		return;
-	}
-	ptr++;			/* Skip the second '*' */
-
-	/* If the sender name is "&COMMAND", ignore this 'packet'       */
-	/* (This is here for backwards compatibility with old firmware) */
-	if (!strcmp(sendername, "&COMMAND")) {
-		strip_info->firmware_level = NoStructure;
-		strip_info->next_command = CompatibilityCommand;
-		return;
-	}
-
-	if (ptr + 4 > end) {
-		RecvErr("No proto key", strip_info);
-		return;
-	}
-
-	/* Get the protocol key out of the buffer */
-	key.c[0] = *ptr++;
-	key.c[1] = *ptr++;
-	key.c[2] = *ptr++;
-	key.c[3] = *ptr++;
-
-	/* If we're using checksums, verify the checksum at the end of the packet */
-	if (strip_info->firmware_level >= ChecksummedMessages) {
-		end -= 4;	/* Chop the last four bytes off the packet (they're the checksum) */
-		if (ptr > end) {
-			RecvErr("Missing Checksum", strip_info);
-			return;
-		}
-		if (!verify_checksum(strip_info)) {
-			RecvErr("Bad Checksum", strip_info);
-			return;
-		}
-	}
-
-	/*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */
-
-	/*
-	 * Fill in (pseudo) source and destination addresses in the packet.
-	 * We assume that the destination address was our address (the radio does not
-	 * tell us this). If the radio supplies a source address, then we use it.
-	 */
-	header.dst_addr = strip_info->true_dev_addr;
-	string_to_radio_address(&header.src_addr, sendername);
-
-#ifdef EXT_COUNTERS
-	if (key.l == SIP0Key.l) {
-		strip_info->rx_rbytes += (end - ptr);
-		process_IP_packet(strip_info, &header, ptr, end);
-	} else if (key.l == ARP0Key.l) {
-		strip_info->rx_rbytes += (end - ptr);
-		process_ARP_packet(strip_info, &header, ptr, end);
-	} else if (key.l == ATR_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		process_AT_response(strip_info, ptr, end);
-	} else if (key.l == ACK_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		process_ACK(strip_info, ptr, end);
-	} else if (key.l == INF_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		process_Info(strip_info, ptr, end);
-	} else if (key.l == ERR_Key.l) {
-		strip_info->rx_ebytes += (end - ptr);
-		RecvErr_Message(strip_info, sendername, ptr, end - ptr);
-	} else
-		RecvErr("Unrecognized protocol key", strip_info);
-#else
-	if (key.l == SIP0Key.l)
-		process_IP_packet(strip_info, &header, ptr, end);
-	else if (key.l == ARP0Key.l)
-		process_ARP_packet(strip_info, &header, ptr, end);
-	else if (key.l == ATR_Key.l)
-		process_AT_response(strip_info, ptr, end);
-	else if (key.l == ACK_Key.l)
-		process_ACK(strip_info, ptr, end);
-	else if (key.l == INF_Key.l)
-		process_Info(strip_info, ptr, end);
-	else if (key.l == ERR_Key.l)
-		RecvErr_Message(strip_info, sendername, ptr, end - ptr);
-	else
-		RecvErr("Unrecognized protocol key", strip_info);
-#endif
-}
-
-#define TTYERROR(X) ((X) == TTY_BREAK   ? "Break"            : \
-                     (X) == TTY_FRAME   ? "Framing Error"    : \
-                     (X) == TTY_PARITY  ? "Parity Error"     : \
-                     (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error")
-
-/*
- * Handle the 'receiver data ready' interrupt.
- * This function is called by the 'tty_io' module in the kernel when
- * a block of STRIP data has been received, which can now be decapsulated
- * and sent on to some IP layer for further processing.
- */
-
-static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
-		  char *fp, int count)
-{
-	struct strip *strip_info = tty->disc_data;
-	const unsigned char *end = cp + count;
-
-	if (!strip_info || strip_info->magic != STRIP_MAGIC
-	    || !netif_running(strip_info->dev))
-		return;
-
-	spin_lock_bh(&strip_lock);
-#if 0
-	{
-		struct timeval tv;
-		do_gettimeofday(&tv);
-		printk(KERN_INFO
-		       "**** strip_receive_buf: %3d bytes at %02d.%06d\n",
-		       count, tv.tv_sec % 100, tv.tv_usec);
-	}
-#endif
-
-#ifdef EXT_COUNTERS
-	strip_info->rx_sbytes += count;
-#endif
-
-	/* Read the characters out of the buffer */
-	while (cp < end) {
-		if (fp && *fp)
-			printk(KERN_INFO "%s: %s on serial port\n",
-			       strip_info->dev->name, TTYERROR(*fp));
-		if (fp && *fp++ && !strip_info->discard) {	/* If there's a serial error, record it */
-			/* If we have some characters in the buffer, discard them */
-			strip_info->discard = strip_info->sx_count;
-			strip_info->rx_errors++;
-		}
-
-		/* Leading control characters (CR, NL, Tab, etc.) are ignored */
-		if (strip_info->sx_count > 0 || *cp >= ' ') {
-			if (*cp == 0x0D) {	/* If end of packet, decide what to do with it */
-				if (strip_info->sx_count > 3000)
-					printk(KERN_INFO
-					       "%s: Cut a %d byte packet (%zd bytes remaining)%s\n",
-					       strip_info->dev->name,
-					       strip_info->sx_count,
-					       end - cp - 1,
-					       strip_info->
-					       discard ? " (discarded)" :
-					       "");
-				if (strip_info->sx_count >
-				    strip_info->sx_size) {
-					strip_info->rx_over_errors++;
-					printk(KERN_INFO
-					       "%s: sx_buff overflow (%d bytes total)\n",
-					       strip_info->dev->name,
-					       strip_info->sx_count);
-				} else if (strip_info->discard)
-					printk(KERN_INFO
-					       "%s: Discarding bad packet (%d/%d)\n",
-					       strip_info->dev->name,
-					       strip_info->discard,
-					       strip_info->sx_count);
-				else
-					process_message(strip_info);
-				strip_info->discard = 0;
-				strip_info->sx_count = 0;
-			} else {
-				/* Make sure we have space in the buffer */
-				if (strip_info->sx_count <
-				    strip_info->sx_size)
-					strip_info->sx_buff[strip_info->
-							    sx_count] =
-					    *cp;
-				strip_info->sx_count++;
-			}
-		}
-		cp++;
-	}
-	spin_unlock_bh(&strip_lock);
-}
-
-
-/************************************************************************/
-/* General control routines						*/
-
-static int set_mac_address(struct strip *strip_info,
-			   MetricomAddress * addr)
-{
-	/*
-	 * We're using a manually specified address if the address is set
-	 * to anything other than all ones. Setting the address to all ones
-	 * disables manual mode and goes back to automatic address determination
-	 * (tracking the true address that the radio has).
-	 */
-	strip_info->manual_dev_addr =
-	    memcmp(addr->c, broadcast_address.c,
-		   sizeof(broadcast_address));
-	if (strip_info->manual_dev_addr)
-		*(MetricomAddress *) strip_info->dev->dev_addr = *addr;
-	else
-		*(MetricomAddress *) strip_info->dev->dev_addr =
-		    strip_info->true_dev_addr;
-	return 0;
-}
-
-static int strip_set_mac_address(struct net_device *dev, void *addr)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	struct sockaddr *sa = addr;
-	printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name);
-	set_mac_address(strip_info, (MetricomAddress *) sa->sa_data);
-	return 0;
-}
-
-static struct net_device_stats *strip_get_stats(struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-	static struct net_device_stats stats;
-
-	memset(&stats, 0, sizeof(struct net_device_stats));
-
-	stats.rx_packets = strip_info->rx_packets;
-	stats.tx_packets = strip_info->tx_packets;
-	stats.rx_dropped = strip_info->rx_dropped;
-	stats.tx_dropped = strip_info->tx_dropped;
-	stats.tx_errors = strip_info->tx_errors;
-	stats.rx_errors = strip_info->rx_errors;
-	stats.rx_over_errors = strip_info->rx_over_errors;
-	return (&stats);
-}
-
-
-/************************************************************************/
-/* Opening and closing							*/
-
-/*
- * Here's the order things happen:
- * When the user runs "slattach -p strip ..."
- *  1. The TTY module calls strip_open;;
- *  2. strip_open calls strip_alloc
- *  3.                  strip_alloc calls register_netdev
- *  4.                  register_netdev calls strip_dev_init
- *  5. then strip_open finishes setting up the strip_info
- *
- * When the user runs "ifconfig st<x> up address netmask ..."
- *  6. strip_open_low gets called
- *
- * When the user runs "ifconfig st<x> down"
- *  7. strip_close_low gets called
- *
- * When the user kills the slattach process
- *  8. strip_close gets called
- *  9. strip_close calls dev_close
- * 10. if the device is still up, then dev_close calls strip_close_low
- * 11. strip_close calls strip_free
- */
-
-/* Open the low-level part of the STRIP channel. Easy! */
-
-static int strip_open_low(struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-
-	if (strip_info->tty == NULL)
-		return (-ENODEV);
-
-	if (!allocate_buffers(strip_info, dev->mtu))
-		return (-ENOMEM);
-
-	strip_info->sx_count = 0;
-	strip_info->tx_left = 0;
-
-	strip_info->discard = 0;
-	strip_info->working = FALSE;
-	strip_info->firmware_level = NoStructure;
-	strip_info->next_command = CompatibilityCommand;
-	strip_info->user_baud = tty_get_baud_rate(strip_info->tty);
-
-	printk(KERN_INFO "%s: Initializing Radio.\n",
-	       strip_info->dev->name);
-	ResetRadio(strip_info);
-	strip_info->idle_timer.expires = jiffies + 1 * HZ;
-	add_timer(&strip_info->idle_timer);
-	netif_wake_queue(dev);
-	return (0);
-}
-
-
-/*
- * Close the low-level part of the STRIP channel. Easy!
- */
-
-static int strip_close_low(struct net_device *dev)
-{
-	struct strip *strip_info = netdev_priv(dev);
-
-	if (strip_info->tty == NULL)
-		return -EBUSY;
-	clear_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags);
-	netif_stop_queue(dev);
-
-	/*
-	 * Free all STRIP frame buffers.
-	 */
-	kfree(strip_info->rx_buff);
-	strip_info->rx_buff = NULL;
-	kfree(strip_info->sx_buff);
-	strip_info->sx_buff = NULL;
-	kfree(strip_info->tx_buff);
-	strip_info->tx_buff = NULL;
-
-	del_timer(&strip_info->idle_timer);
-	return 0;
-}
-
-static const struct header_ops strip_header_ops = {
-	.create = strip_header,
-	.rebuild = strip_rebuild_header,
-};
-
-
-static const struct net_device_ops strip_netdev_ops = {
-	.ndo_open 	= strip_open_low,
-	.ndo_stop 	= strip_close_low,
-	.ndo_start_xmit = strip_xmit,
-	.ndo_set_mac_address = strip_set_mac_address,
-	.ndo_get_stats	= strip_get_stats,
-	.ndo_change_mtu = strip_change_mtu,
-};
-
-/*
- * This routine is called by DDI when the
- * (dynamically assigned) device is registered
- */
-
-static void strip_dev_setup(struct net_device *dev)
-{
-	/*
-	 * Finish setting up the DEVICE info.
-	 */
-
-	dev->trans_start = 0;
-	dev->tx_queue_len = 30;	/* Drop after 30 frames queued */
-
-	dev->flags = 0;
-	dev->mtu = DEFAULT_STRIP_MTU;
-	dev->type = ARPHRD_METRICOM;	/* dtang */
-	dev->hard_header_len = sizeof(STRIP_Header);
-	/*
-	 *  netdev_priv(dev) Already holds a pointer to our struct strip
-	 */
-
-	*(MetricomAddress *)dev->broadcast = broadcast_address;
-	dev->dev_addr[0] = 0;
-	dev->addr_len = sizeof(MetricomAddress);
-
-	dev->header_ops = &strip_header_ops,
-	dev->netdev_ops = &strip_netdev_ops;
-}
-
-/*
- * Free a STRIP channel.
- */
-
-static void strip_free(struct strip *strip_info)
-{
-	spin_lock_bh(&strip_lock);
-	list_del_rcu(&strip_info->list);
-	spin_unlock_bh(&strip_lock);
-
-	strip_info->magic = 0;
-
-	free_netdev(strip_info->dev);
-}
-
-
-/*
- * Allocate a new free STRIP channel
- */
-static struct strip *strip_alloc(void)
-{
-	struct list_head *n;
-	struct net_device *dev;
-	struct strip *strip_info;
-
-	dev = alloc_netdev(sizeof(struct strip), "st%d",
-			   strip_dev_setup);
-
-	if (!dev)
-		return NULL;	/* If no more memory, return */
-
-
-	strip_info = netdev_priv(dev);
-	strip_info->dev = dev;
-
-	strip_info->magic = STRIP_MAGIC;
-	strip_info->tty = NULL;
-
-	strip_info->gratuitous_arp = jiffies + LongTime;
-	strip_info->arp_interval = 0;
-	init_timer(&strip_info->idle_timer);
-	strip_info->idle_timer.data = (long) dev;
-	strip_info->idle_timer.function = strip_IdleTask;
-
-
-	spin_lock_bh(&strip_lock);
- rescan:
-	/*
-	 * Search the list to find where to put our new entry
-	 * (and in the process decide what channel number it is
-	 * going to be)
-	 */
-	list_for_each(n, &strip_list) {
-		struct strip *s = hlist_entry(n, struct strip, list);
-
-		if (s->dev->base_addr == dev->base_addr) {
-			++dev->base_addr;
-			goto rescan;
-		}
-	}
-
-	sprintf(dev->name, "st%ld", dev->base_addr);
-
-	list_add_tail_rcu(&strip_info->list, &strip_list);
-	spin_unlock_bh(&strip_lock);
-
-	return strip_info;
-}
-
-/*
- * Open the high-level part of the STRIP channel.
- * This function is called by the TTY module when the
- * STRIP line discipline is called for.  Because we are
- * sure the tty line exists, we only have to link it to
- * a free STRIP channel...
- */
-
-static int strip_open(struct tty_struct *tty)
-{
-	struct strip *strip_info = tty->disc_data;
-
-	/*
-	 * First make sure we're not already connected.
-	 */
-
-	if (strip_info && strip_info->magic == STRIP_MAGIC)
-		return -EEXIST;
-
-	/*
-	 * We need a write method.
-	 */
-
-	if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
-		return -EOPNOTSUPP;
-
-	/*
-	 * OK.  Find a free STRIP channel to use.
-	 */
-	if ((strip_info = strip_alloc()) == NULL)
-		return -ENFILE;
-
-	/*
-	 * Register our newly created device so it can be ifconfig'd
-	 * strip_dev_init() will be called as a side-effect
-	 */
-
-	if (register_netdev(strip_info->dev) != 0) {
-		printk(KERN_ERR "strip: register_netdev() failed.\n");
-		strip_free(strip_info);
-		return -ENFILE;
-	}
-
-	strip_info->tty = tty;
-	tty->disc_data = strip_info;
-	tty->receive_room = 65536;
-
-	tty_driver_flush_buffer(tty);
-
-	/*
-	 * Restore default settings
-	 */
-
-	strip_info->dev->type = ARPHRD_METRICOM;	/* dtang */
-
-	/*
-	 * Set tty options
-	 */
-
-	tty->termios->c_iflag |= IGNBRK | IGNPAR;	/* Ignore breaks and parity errors. */
-	tty->termios->c_cflag |= CLOCAL;	/* Ignore modem control signals. */
-	tty->termios->c_cflag &= ~HUPCL;	/* Don't close on hup */
-
-	printk(KERN_INFO "STRIP: device \"%s\" activated\n",
-	       strip_info->dev->name);
-
-	/*
-	 * Done.  We have linked the TTY line to a channel.
-	 */
-	return (strip_info->dev->base_addr);
-}
-
-/*
- * Close down a STRIP channel.
- * This means flushing out any pending queues, and then restoring the
- * TTY line discipline to what it was before it got hooked to STRIP
- * (which usually is TTY again).
- */
-
-static void strip_close(struct tty_struct *tty)
-{
-	struct strip *strip_info = tty->disc_data;
-
-	/*
-	 * First make sure we're connected.
-	 */
-
-	if (!strip_info || strip_info->magic != STRIP_MAGIC)
-		return;
-
-	unregister_netdev(strip_info->dev);
-
-	tty->disc_data = NULL;
-	strip_info->tty = NULL;
-	printk(KERN_INFO "STRIP: device \"%s\" closed down\n",
-	       strip_info->dev->name);
-	strip_free(strip_info);
-	tty->disc_data = NULL;
-}
-
-
-/************************************************************************/
-/* Perform I/O control calls on an active STRIP channel.		*/
-
-static int strip_ioctl(struct tty_struct *tty, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	struct strip *strip_info = tty->disc_data;
-
-	/*
-	 * First make sure we're connected.
-	 */
-
-	if (!strip_info || strip_info->magic != STRIP_MAGIC)
-		return -EINVAL;
-
-	switch (cmd) {
-	case SIOCGIFNAME:
-		if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1))
-			return -EFAULT;
-		break;
-	case SIOCSIFHWADDR:
-	{
-		MetricomAddress addr;
-		//printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
-		if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress)))
-			return -EFAULT;
-		return set_mac_address(strip_info, &addr);
-	}
-	default:
-		return tty_mode_ioctl(tty, file, cmd, arg);
-		break;
-	}
-	return 0;
-}
-
-
-/************************************************************************/
-/* Initialization							*/
-
-static struct tty_ldisc_ops strip_ldisc = {
-	.magic = TTY_LDISC_MAGIC,
-	.name = "strip",
-	.owner = THIS_MODULE,
-	.open = strip_open,
-	.close = strip_close,
-	.ioctl = strip_ioctl,
-	.receive_buf = strip_receive_buf,
-	.write_wakeup = strip_write_some_more,
-};
-
-/*
- * Initialize the STRIP driver.
- * This routine is called at boot time, to bootstrap the multi-channel
- * STRIP driver
- */
-
-static char signon[] __initdata =
-    KERN_INFO "STRIP: Version %s (unlimited channels)\n";
-
-static int __init strip_init_driver(void)
-{
-	int status;
-
-	printk(signon, StripVersion);
-
-	
-	/*
-	 * Fill in our line protocol discipline, and register it
-	 */
-	if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc)))
-		printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n",
-		       status);
-
-	/*
-	 * Register the status file with /proc
-	 */
-	proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops);
-
-	return status;
-}
-
-module_init(strip_init_driver);
-
-static const char signoff[] __exitdata =
-    KERN_INFO "STRIP: Module Unloaded\n";
-
-static void __exit strip_exit_driver(void)
-{
-	int i;
-	struct list_head *p,*n;
-
-	/* module ref count rules assure that all entries are unregistered */
-	list_for_each_safe(p, n, &strip_list) {
-		struct strip *s = list_entry(p, struct strip, list);
-		strip_free(s);
-	}
-
-	/* Unregister with the /proc/net file here. */
-	proc_net_remove(&init_net, "strip");
-
-	if ((i = tty_unregister_ldisc(N_STRIP)))
-		printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i);
-
-	printk(signoff);
-}
-
-module_exit(strip_exit_driver);
-
-MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>");
-MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver");
-MODULE_LICENSE("Dual BSD/GPL");
-
-MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem");
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
deleted file mode 100644
index 431a20e..0000000
--- a/drivers/net/wireless/wavelan_cs.c
+++ /dev/null
@@ -1,4635 +0,0 @@
-/*
- *	Wavelan Pcmcia driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- * Original copyright follow. See wavelan_cs.p.h for details.
- *
- * This code is derived from Anthony D. Joseph's code and all the changes here
- * are also under the original copyright below.
- *
- * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and
- * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services
- *
- * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added
- * critical code in the routine to initialize the Modem Management Controller.
- *
- * Thanks to Alan Cox and Bruce Janson for their advice.
- *
- *	-- Yunzhou Li (scip4166@nus.sg)
- *
-#ifdef WAVELAN_ROAMING	
- * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu)
- * based on patch by Joe Finney from Lancaster University.
-#endif
- *
- * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
- * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
- *
- *   A non-shared memory PCMCIA ethernet driver for linux
- *
- * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu)
- *
- *
- * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu)
- *
- * Apr 2 '98  made changes to bring the i82593 control/int handling in line
- *             with offical specs...
- *
- ****************************************************************************
- *   Copyright 1995
- *   Anthony D. Joseph
- *   Massachusetts Institute of Technology
- *
- *   Permission to use, copy, modify, and distribute this program
- *   for any purpose and without fee is hereby granted, provided
- *   that this copyright and permission notice appear on all copies
- *   and supporting documentation, the name of M.I.T. not be used
- *   in advertising or publicity pertaining to distribution of the
- *   program without specific prior permission, and notice be given
- *   in supporting documentation that copying and distribution is
- *   by permission of M.I.T.  M.I.T. makes no representations about
- *   the suitability of this software for any purpose.  It is pro-
- *   vided "as is" without express or implied warranty.         
- ****************************************************************************
- *
- */
-
-/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */
-#include "wavelan_cs.p.h"		/* Private header */
-
-#ifdef WAVELAN_ROAMING
-static void wl_cell_expiry(unsigned long data);
-static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp);
-static void wv_nwid_filter(unsigned char mode, net_local *lp);
-#endif  /*  WAVELAN_ROAMING  */
-
-/************************* MISC SUBROUTINES **************************/
-/*
- * Subroutines which won't fit in one of the following category
- * (wavelan modem or i82593)
- */
-
-/******************* MODEM MANAGEMENT SUBROUTINES *******************/
-/*
- * Useful subroutines to manage the modem of the wavelan
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Read from card's Host Adaptor Status Register.
- */
-static inline u_char
-hasr_read(u_long	base)
-{
-  return(inb(HASR(base)));
-} /* hasr_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Write to card's Host Adapter Command Register.
- */
-static inline void
-hacr_write(u_long	base,
-	   u_char	hacr)
-{
-  outb(hacr, HACR(base));
-} /* hacr_write */
-
-/*------------------------------------------------------------------*/
-/*
- * Write to card's Host Adapter Command Register. Include a delay for
- * those times when it is needed.
- */
-static void
-hacr_write_slow(u_long	base,
-		u_char	hacr)
-{
-  hacr_write(base, hacr);
-  /* delay might only be needed sometimes */
-  mdelay(1);
-} /* hacr_write_slow */
-
-/*------------------------------------------------------------------*/
-/*
- * Read the Parameter Storage Area from the WaveLAN card's memory
- */
-static void
-psa_read(struct net_device *	dev,
-	 int		o,	/* offset in PSA */
-	 u_char *	b,	/* buffer to fill */
-	 int		n)	/* size to read */
-{
-  net_local *lp = netdev_priv(dev);
-  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
-
-  while(n-- > 0)
-    {
-      *b++ = readb(ptr);
-      /* Due to a lack of address decode pins, the WaveLAN PCMCIA card
-       * only supports reading even memory addresses. That means the
-       * increment here MUST be two.
-       * Because of that, we can't use memcpy_fromio()...
-       */
-      ptr += 2;
-    }
-} /* psa_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Write the Parameter Storage Area to the WaveLAN card's memory
- */
-static void
-psa_write(struct net_device *	dev,
-	  int		o,	/* Offset in psa */
-	  u_char *	b,	/* Buffer in memory */
-	  int		n)	/* Length of buffer */
-{
-  net_local *lp = netdev_priv(dev);
-  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
-  int		count = 0;
-  unsigned int	base = dev->base_addr;
-  /* As there seem to have no flag PSA_BUSY as in the ISA model, we are
-   * oblige to verify this address to know when the PSA is ready... */
-  volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
-    (psaoff(0, psa_comp_number) << 1);
-
-  /* Authorize writing to PSA */
-  hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
-
-  while(n-- > 0)
-    {
-      /* write to PSA */
-      writeb(*b++, ptr);
-      ptr += 2;
-
-      /* I don't have the spec, so I don't know what the correct
-       * sequence to write is. This hack seem to work for me... */
-      count = 0;
-      while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100))
-	mdelay(1);
-    }
-
-  /* Put the host interface back in standard state */
-  hacr_write(base, HACR_DEFAULT);
-} /* psa_write */
-
-#ifdef SET_PSA_CRC
-/*------------------------------------------------------------------*/
-/*
- * Calculate the PSA CRC
- * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
- * NOTE: By specifying a length including the CRC position the
- * returned value should be zero. (i.e. a correct checksum in the PSA)
- *
- * The Windows drivers don't use the CRC, but the AP and the PtP tool
- * depend on it.
- */
-static u_short
-psa_crc(unsigned char *	psa,	/* The PSA */
-	int		size)	/* Number of short for CRC */
-{
-  int		byte_cnt;	/* Loop on the PSA */
-  u_short	crc_bytes = 0;	/* Data in the PSA */
-  int		bit_cnt;	/* Loop on the bits of the short */
-
-  for(byte_cnt = 0; byte_cnt < size; byte_cnt++ )
-    {
-      crc_bytes ^= psa[byte_cnt];	/* Its an xor */
-
-      for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ )
-	{
-	  if(crc_bytes & 0x0001)
-	    crc_bytes = (crc_bytes >> 1) ^ 0xA001;
-	  else
-	    crc_bytes >>= 1 ;
-        }
-    }
-
-  return crc_bytes;
-} /* psa_crc */
-#endif	/* SET_PSA_CRC */
-
-/*------------------------------------------------------------------*/
-/*
- * update the checksum field in the Wavelan's PSA
- */
-static void
-update_psa_checksum(struct net_device *	dev)
-{
-#ifdef SET_PSA_CRC
-  psa_t		psa;
-  u_short	crc;
-
-  /* read the parameter storage area */
-  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-
-  /* update the checksum */
-  crc = psa_crc((unsigned char *) &psa,
-		sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1])
-		- sizeof(psa.psa_crc_status));
-
-  psa.psa_crc[0] = crc & 0xFF;
-  psa.psa_crc[1] = (crc & 0xFF00) >> 8;
-
-  /* Write it ! */
-  psa_write(dev, (char *)&psa.psa_crc - (char *)&psa,
-	    (unsigned char *)&psa.psa_crc, 2);
-
-#ifdef DEBUG_IOCTL_INFO
-  printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
-          dev->name, psa.psa_crc[0], psa.psa_crc[1]);
-
-  /* Check again (luxury !) */
-  crc = psa_crc((unsigned char *) &psa,
-		 sizeof(psa) - sizeof(psa.psa_crc_status));
-
-  if(crc != 0)
-    printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name);
-#endif /* DEBUG_IOCTL_INFO */
-#endif	/* SET_PSA_CRC */
-} /* update_psa_checksum */
-
-/*------------------------------------------------------------------*/
-/*
- * Write 1 byte to the MMC.
- */
-static void
-mmc_out(u_long		base,
-	u_short		o,
-	u_char		d)
-{
-  int count = 0;
-
-  /* Wait for MMC to go idle */
-  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
-    udelay(10);
-
-  outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base));
-  outb(d, MMD(base));
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to write bytes to the Modem Management Controller.
- * We start by the end because it is the way it should be !
- */
-static void
-mmc_write(u_long	base,
-	  u_char	o,
-	  u_char *	b,
-	  int		n)
-{
-  o += n;
-  b += n;
-
-  while(n-- > 0 )
-    mmc_out(base, --o, *(--b));
-} /* mmc_write */
-
-/*------------------------------------------------------------------*/
-/*
- * Read 1 byte from the MMC.
- * Optimised version for 1 byte, avoid using memory...
- */
-static u_char
-mmc_in(u_long	base,
-       u_short	o)
-{
-  int count = 0;
-
-  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
-    udelay(10);
-  outb(o << 1, MMR(base));		/* Set the read address */
-
-  outb(0, MMD(base));			/* Required dummy write */
-
-  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
-    udelay(10);
-  return (u_char) (inb(MMD(base)));	/* Now do the actual read */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to read bytes from the Modem Management Controller.
- * The implementation is complicated by a lack of address lines,
- * which prevents decoding of the low-order bit.
- * (code has just been moved in the above function)
- * We start by the end because it is the way it should be !
- */
-static void
-mmc_read(u_long		base,
-	 u_char		o,
-	 u_char *	b,
-	 int		n)
-{
-  o += n;
-  b += n;
-
-  while(n-- > 0)
-    *(--b) = mmc_in(base, --o);
-} /* mmc_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Get the type of encryption available...
- */
-static inline int
-mmc_encr(u_long		base)	/* i/o port of the card */
-{
-  int	temp;
-
-  temp = mmc_in(base, mmroff(0, mmr_des_avail));
-  if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
-    return 0;
-  else
-    return temp;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wait for the frequency EEprom to complete a command...
- */
-static void
-fee_wait(u_long		base,	/* i/o port of the card */
-	 int		delay,	/* Base delay to wait for */
-	 int		number)	/* Number of time to wait */
-{
-  int		count = 0;	/* Wait only a limited time */
-
-  while((count++ < number) &&
-	(mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY))
-    udelay(delay);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Read bytes from the Frequency EEprom (frequency select cards).
- */
-static void
-fee_read(u_long		base,	/* i/o port of the card */
-	 u_short	o,	/* destination offset */
-	 u_short *	b,	/* data buffer */
-	 int		n)	/* number of registers */
-{
-  b += n;		/* Position at the end of the area */
-
-  /* Write the address */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
-
-  /* Loop on all buffer */
-  while(n-- > 0)
-    {
-      /* Write the read command */
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ);
-
-      /* Wait until EEprom is ready (should be quick !) */
-      fee_wait(base, 10, 100);
-
-      /* Read the value */
-      *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) |
-	      mmc_in(base, mmroff(0, mmr_fee_data_l)));
-    }
-}
-
-
-/*------------------------------------------------------------------*/
-/*
- * Write bytes from the Frequency EEprom (frequency select cards).
- * This is a bit complicated, because the frequency eeprom has to
- * be unprotected and the write enabled.
- * Jean II
- */
-static void
-fee_write(u_long	base,	/* i/o port of the card */
-	  u_short	o,	/* destination offset */
-	  u_short *	b,	/* data buffer */
-	  int		n)	/* number of registers */
-{
-  b += n;		/* Position at the end of the area */
-
-#ifdef EEPROM_IS_PROTECTED	/* disabled */
-#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
-  /* Ask to read the protected register */
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
-
-  fee_wait(base, 10, 100);
-
-  /* Read the protected register */
-  printk("Protected 2 : %02X-%02X\n",
-	 mmc_in(base, mmroff(0, mmr_fee_data_h)),
-	 mmc_in(base, mmroff(0, mmr_fee_data_l)));
-#endif	/* DOESNT_SEEM_TO_WORK */
-
-  /* Enable protected register */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
-
-  fee_wait(base, 10, 100);
-
-  /* Unprotect area */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
-#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
-  /* Or use : */
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
-#endif	/* DOESNT_SEEM_TO_WORK */
-
-  fee_wait(base, 10, 100);
-#endif	/* EEPROM_IS_PROTECTED */
-
-  /* Write enable */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
-
-  fee_wait(base, 10, 100);
-
-  /* Write the EEprom address */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
-
-  /* Loop on all buffer */
-  while(n-- > 0)
-    {
-      /* Write the value */
-      mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
-      mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
-
-      /* Write the write command */
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE);
-
-      /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */
-      mdelay(10);
-      fee_wait(base, 10, 100);
-    }
-
-  /* Write disable */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
-
-  fee_wait(base, 10, 100);
-
-#ifdef EEPROM_IS_PROTECTED	/* disabled */
-  /* Reprotect EEprom */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
-
-  fee_wait(base, 10, 100);
-#endif	/* EEPROM_IS_PROTECTED */
-}
-
-/******************* WaveLAN Roaming routines... ********************/
-
-#ifdef WAVELAN_ROAMING	/* Conditional compile, see wavelan_cs.h */
-
-static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00};
-  
-static void wv_roam_init(struct net_device *dev)
-{
-  net_local  *lp= netdev_priv(dev);
-
-  /* Do not remove this unless you have a good reason */
-  printk(KERN_NOTICE "%s: Warning, you have enabled roaming on"
-	 " device %s !\n", dev->name, dev->name);
-  printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature"
-	 " of the Wavelan driver.\n");
-  printk(KERN_NOTICE "It may work, but may also make the driver behave in"
-	 " erratic ways or crash.\n");
-
-  lp->wavepoint_table.head=NULL;           /* Initialise WavePoint table */
-  lp->wavepoint_table.num_wavepoints=0;
-  lp->wavepoint_table.locked=0;
-  lp->curr_point=NULL;                        /* No default WavePoint */
-  lp->cell_search=0;
-  
-  lp->cell_timer.data=(long)lp;               /* Start cell expiry timer */
-  lp->cell_timer.function=wl_cell_expiry;
-  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
-  add_timer(&lp->cell_timer);
-  
-  wv_nwid_filter(NWID_PROMISC,lp) ;    /* Enter NWID promiscuous mode */
-  /* to build up a good WavePoint */
-                                           /* table... */
-  printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name);
-}
- 
-static void wv_roam_cleanup(struct net_device *dev)
-{
-  wavepoint_history *ptr,*old_ptr;
-  net_local *lp= netdev_priv(dev);
-  
-  printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name);
-  
-  /* Fixme : maybe we should check that the timer exist before deleting it */
-  del_timer(&lp->cell_timer);          /* Remove cell expiry timer       */
-  ptr=lp->wavepoint_table.head;        /* Clear device's WavePoint table */
-  while(ptr!=NULL)
-    {
-      old_ptr=ptr;
-      ptr=ptr->next;	
-      wl_del_wavepoint(old_ptr,lp);	
-    }
-}
-
-/* Enable/Disable NWID promiscuous mode on a given device */
-static void wv_nwid_filter(unsigned char mode, net_local *lp)
-{
-  mm_t                  m;
-  unsigned long         flags;
-  
-#ifdef WAVELAN_ROAMING_DEBUG
-  printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name);
-#endif
-  
-  /* Disable interrupts & save flags */
-  spin_lock_irqsave(&lp->spinlock, flags);
-  
-  m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
-  mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
-  
-  if(mode==NWID_PROMISC)
-    lp->cell_search=1;
-  else
-    lp->cell_search=0;
-
-  /* ReEnable interrupts & restore flags */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-}
-
-/* Find a record in the WavePoint table matching a given NWID */
-static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp)
-{
-  wavepoint_history	*ptr=lp->wavepoint_table.head;
-  
-  while(ptr!=NULL){
-    if(ptr->nwid==nwid)
-      return ptr;	
-    ptr=ptr->next;
-  }
-  return NULL;
-}
-
-/* Create a new wavepoint table entry */
-static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp)
-{
-  wavepoint_history *new_wavepoint;
-
-#ifdef WAVELAN_ROAMING_DEBUG	
-  printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid);
-#endif
-  
-  if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
-    return NULL;
-  
-  new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
-  if(new_wavepoint==NULL)
-    return NULL;
-  
-  new_wavepoint->nwid=nwid;                       /* New WavePoints NWID */
-  new_wavepoint->average_fast=0;                    /* Running Averages..*/
-  new_wavepoint->average_slow=0;
-  new_wavepoint->qualptr=0;                       /* Start of ringbuffer */
-  new_wavepoint->last_seq=seq-1;                /* Last sequence no.seen */
-  memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */
-  
-  new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */
-  new_wavepoint->prev=NULL;
-  
-  if(lp->wavepoint_table.head!=NULL)
-    lp->wavepoint_table.head->prev=new_wavepoint;
-  
-  lp->wavepoint_table.head=new_wavepoint;
-  
-  lp->wavepoint_table.num_wavepoints++;     /* no. of visible wavepoints */
-  
-  return new_wavepoint;
-}
-
-/* Remove a wavepoint entry from WavePoint table */
-static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp)
-{
-  if(wavepoint==NULL)
-    return;
-  
-  if(lp->curr_point==wavepoint)
-    lp->curr_point=NULL;
-  
-  if(wavepoint->prev!=NULL)
-    wavepoint->prev->next=wavepoint->next;
-  
-  if(wavepoint->next!=NULL)
-    wavepoint->next->prev=wavepoint->prev;
-  
-  if(lp->wavepoint_table.head==wavepoint)
-    lp->wavepoint_table.head=wavepoint->next;
-  
-  lp->wavepoint_table.num_wavepoints--;
-  kfree(wavepoint);
-}
-
-/* Timer callback function - checks WavePoint table for stale entries */ 
-static void wl_cell_expiry(unsigned long data)
-{
-  net_local *lp=(net_local *)data;
-  wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point;
-  
-#if WAVELAN_ROAMING_DEBUG > 1
-  printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name);
-#endif
-  
-  if(lp->wavepoint_table.locked)
-    {
-#if WAVELAN_ROAMING_DEBUG > 1
-      printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n");
-#endif
-      
-      lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */
-      add_timer(&lp->cell_timer);
-      return;
-    }
-  
-  while(wavepoint!=NULL)
-    {
-      if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT))
-	{
-#ifdef WAVELAN_ROAMING_DEBUG
-	  printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid);
-#endif
-	  
-	  old_point=wavepoint;
-	  wavepoint=wavepoint->next;
-	  wl_del_wavepoint(old_point,lp);
-	}
-      else
-	wavepoint=wavepoint->next;
-    }
-  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
-  add_timer(&lp->cell_timer);
-}
-
-/* Update SNR history of a wavepoint */
-static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq)	
-{
-  int i=0,num_missed=0,ptr=0;
-  int average_fast=0,average_slow=0;
-  
-  num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed
-							    any beacons? */
-  if(num_missed)
-    for(i=0;i<num_missed;i++)
-      {
-	wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */
-	wavepoint->qualptr %=WAVEPOINT_HISTORY;    /* in the ringbuffer. */
-      }
-  wavepoint->last_seen=jiffies;                 /* Add beacon to history */
-  wavepoint->last_seq=seq;	
-  wavepoint->sigqual[wavepoint->qualptr++]=sigqual;          
-  wavepoint->qualptr %=WAVEPOINT_HISTORY;
-  ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY;
-  
-  for(i=0;i<WAVEPOINT_FAST_HISTORY;i++)       /* Update running averages */
-    {
-      average_fast+=wavepoint->sigqual[ptr++];
-      ptr %=WAVEPOINT_HISTORY;
-    }
-  
-  average_slow=average_fast;
-  for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++)
-    {
-      average_slow+=wavepoint->sigqual[ptr++];
-      ptr %=WAVEPOINT_HISTORY;
-    }
-  
-  wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY;
-  wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY;	
-}
-
-/* Perform a handover to a new WavePoint */
-static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
-{
-  unsigned int		base = lp->dev->base_addr;
-  mm_t                  m;
-  unsigned long         flags;
-
-  if(wavepoint==lp->curr_point)          /* Sanity check... */
-    {
-      wv_nwid_filter(!NWID_PROMISC,lp);
-      return;
-    }
-  
-#ifdef WAVELAN_ROAMING_DEBUG
-  printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name);
-#endif
- 	
-  /* Disable interrupts & save flags */
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
-  m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
-  
-  mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
-  
-  /* ReEnable interrupts & restore flags */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  wv_nwid_filter(!NWID_PROMISC,lp);
-  lp->curr_point=wavepoint;
-}
-
-/* Called when a WavePoint beacon is received */
-static void wl_roam_gather(struct net_device *  dev,
-			   u_char *  hdr,   /* Beacon header */
-			   u_char *  stats) /* SNR, Signal quality
-						      of packet */
-{
-  wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
-  unsigned short nwid=ntohs(beacon->nwid);  
-  unsigned short sigqual=stats[2] & MMR_SGNL_QUAL;   /* SNR of beacon */
-  wavepoint_history *wavepoint=NULL;                /* WavePoint table entry */
-  net_local *lp = netdev_priv(dev);              /* Device info */
-
-#ifdef I_NEED_THIS_FEATURE
-  /* Some people don't need this, some other may need it */
-  nwid=nwid^ntohs(beacon->domain_id);
-#endif
-
-#if WAVELAN_ROAMING_DEBUG > 1
-  printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
-  printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
-#endif
-  
-  lp->wavepoint_table.locked=1;                            /* <Mutex> */
-  
-  wavepoint=wl_roam_check(nwid,lp);            /* Find WavePoint table entry */
-  if(wavepoint==NULL)                    /* If no entry, Create a new one... */
-    {
-      wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp);
-      if(wavepoint==NULL)
-	goto out;
-    }
-  if(lp->curr_point==NULL)             /* If this is the only WavePoint, */
-    wv_roam_handover(wavepoint, lp);	         /* Jump on it! */
-  
-  wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history
-							 stats. */
-  
-  if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */
-    if(!lp->cell_search)                  /* WavePoint is getting faint, */
-      wv_nwid_filter(NWID_PROMISC,lp);    /* start looking for a new one */
-  
-  if(wavepoint->average_slow > 
-     lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA)
-    wv_roam_handover(wavepoint, lp);   /* Handover to a better WavePoint */
-  
-  if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */
-    if(lp->cell_search)  /* getting better, drop out of cell search mode */
-      wv_nwid_filter(!NWID_PROMISC,lp);
-  
-out:
-  lp->wavepoint_table.locked=0;                        /* </MUTEX>   :-) */
-}
-
-/* Test this MAC frame a WavePoint beacon */
-static inline int WAVELAN_BEACON(unsigned char *data)
-{
-  wavepoint_beacon *beacon= (wavepoint_beacon *)data;
-  static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
-  
-  if(memcmp(beacon,&beacon_template,9)==0)
-    return 1;
-  else
-    return 0;
-}
-#endif	/* WAVELAN_ROAMING */
-
-/************************ I82593 SUBROUTINES *************************/
-/*
- * Useful subroutines to manage the Ethernet controller
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to synchronously send a command to the i82593 chip. 
- * Should be called with interrupts disabled.
- * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
- *  wv_82593_config() & wv_diag())
- */
-static int
-wv_82593_cmd(struct net_device *	dev,
-	     char *	str,
-	     int	cmd,
-	     int	result)
-{
-  unsigned int	base = dev->base_addr;
-  int		status;
-  int		wait_completed;
-  long		spin;
-
-  /* Spin until the chip finishes executing its current command (if any) */
-  spin = 1000;
-  do
-    {
-      /* Time calibration of the loop */
-      udelay(10);
-
-      /* Read the interrupt register */
-      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-      status = inb(LCSR(base));
-    }
-  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
-
-  /* If the interrupt hasn't been posted */
-  if (spin < 0) {
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
-	     str, status);
-#endif
-      return(FALSE);
-    }
-
-  /* Issue the command to the controller */
-  outb(cmd, LCCR(base));
-
-  /* If we don't have to check the result of the command
-   * Note : this mean that the irq handler will deal with that */
-  if(result == SR0_NO_RESULT)
-    return(TRUE);
-
-  /* We are waiting for command completion */
-  wait_completed = TRUE;
-
-  /* Busy wait while the LAN controller executes the command. */
-  spin = 1000;
-  do
-    {
-      /* Time calibration of the loop */
-      udelay(10);
-
-      /* Read the interrupt register */
-      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
-      status = inb(LCSR(base));
-
-      /* Check if there was an interrupt posted */
-      if((status & SR0_INTERRUPT))
-	{
-	  /* Acknowledge the interrupt */
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
-
-	  /* Check if interrupt is a command completion */
-	  if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
-	     ((status & SR0_BOTH_RX_TX) != 0x0) &&
-	     !(status & SR0_RECEPTION))
-	    {
-	      /* Signal command completion */
-	      wait_completed = FALSE;
-	    }
-	  else
-	    {
-	      /* Note : Rx interrupts will be handled later, because we can
-	       * handle multiple Rx packets at once */
-#ifdef DEBUG_INTERRUPT_INFO
-	      printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
-#endif
-	    }
-	}
-    }
-  while(wait_completed && (spin-- > 0));
-
-  /* If the interrupt hasn't be posted */
-  if(wait_completed)
-    {
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
-	     str, status);
-#endif
-      return(FALSE);
-    }
-
-  /* Check the return code returned by the card (see above) against
-   * the expected return code provided by the caller */
-  if((status & SR0_EVENT_MASK) != result)
-    {
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
-	     str, status);
-#endif
-      return(FALSE);
-    }
-
-  return(TRUE);
-} /* wv_82593_cmd */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does a 593 op-code number 7, and obtains the diagnose
- * status for the WaveLAN.
- */
-static inline int
-wv_diag(struct net_device *	dev)
-{
-  return(wv_82593_cmd(dev, "wv_diag(): diagnose",
-		      OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED));
-} /* wv_diag */
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to read len bytes from the i82593's ring buffer, starting at
- * chip address addr. The results read from the chip are stored in buf.
- * The return value is the address to use for next the call.
- */
-static int
-read_ringbuf(struct net_device *	dev,
-	     int	addr,
-	     char *	buf,
-	     int	len)
-{
-  unsigned int	base = dev->base_addr;
-  int		ring_ptr = addr;
-  int		chunk_len;
-  char *	buf_ptr = buf;
-
-  /* Get all the buffer */
-  while(len > 0)
-    {
-      /* Position the Program I/O Register at the ring buffer pointer */
-      outb(ring_ptr & 0xff, PIORL(base));
-      outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base));
-
-      /* First, determine how much we can read without wrapping around the
-	 ring buffer */
-      if((addr + len) < (RX_BASE + RX_SIZE))
-	chunk_len = len;
-      else
-	chunk_len = RX_BASE + RX_SIZE - addr;
-      insb(PIOP(base), buf_ptr, chunk_len);
-      buf_ptr += chunk_len;
-      len -= chunk_len;
-      ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE;
-    }
-  return(ring_ptr);
-} /* read_ringbuf */
-
-/*------------------------------------------------------------------*/
-/*
- * Reconfigure the i82593, or at least ask for it...
- * Because wv_82593_config use the transmission buffer, we must do it
- * when we are sure that there is no transmission, so we do it now
- * or in wavelan_packet_xmit() (I can't find any better place,
- * wavelan_interrupt is not an option...), so you may experience
- * some delay sometime...
- */
-static void
-wv_82593_reconfig(struct net_device *	dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  struct pcmcia_device *		link = lp->link;
-  unsigned long		flags;
-
-  /* Arm the flag, will be cleard in wv_82593_config() */
-  lp->reconfig_82593 = TRUE;
-
-  /* Check if we can do it now ! */
-  if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
-    {
-      spin_lock_irqsave(&lp->spinlock, flags);	/* Disable interrupts */
-      wv_82593_config(dev);
-      spin_unlock_irqrestore(&lp->spinlock, flags);	/* Re-enable interrupts */
-    }
-  else
-    {
-#ifdef DEBUG_IOCTL_INFO
-      printk(KERN_DEBUG
-	     "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
-	     dev->name, dev->state, link->open);
-#endif
-    }
-}
-
-/********************* DEBUG & INFO SUBROUTINES *********************/
-/*
- * This routines are used in the code to show debug informations.
- * Most of the time, it dump the content of hardware structures...
- */
-
-#ifdef DEBUG_PSA_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted contents of the Parameter Storage Area.
- */
-static void
-wv_psa_show(psa_t *	p)
-{
-  printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
-  printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
-	 p->psa_io_base_addr_1,
-	 p->psa_io_base_addr_2,
-	 p->psa_io_base_addr_3,
-	 p->psa_io_base_addr_4);
-  printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
-	 p->psa_rem_boot_addr_1,
-	 p->psa_rem_boot_addr_2,
-	 p->psa_rem_boot_addr_3);
-  printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
-  printk("psa_int_req_no: %d\n", p->psa_int_req_no);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr);
-  printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr);
-  printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
-  printk("psa_comp_number: %d, ", p->psa_comp_number);
-  printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
-  printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
-	 p->psa_feature_select);
-  printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
-  printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
-  printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
-  printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]);
-  printk("psa_nwid_select: %d\n", p->psa_nwid_select);
-  printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select);
-  printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-	 p->psa_encryption_key[0],
-	 p->psa_encryption_key[1],
-	 p->psa_encryption_key[2],
-	 p->psa_encryption_key[3],
-	 p->psa_encryption_key[4],
-	 p->psa_encryption_key[5],
-	 p->psa_encryption_key[6],
-	 p->psa_encryption_key[7]);
-  printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
-  printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
-	 p->psa_call_code[0]);
-  printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-	 p->psa_call_code[0],
-	 p->psa_call_code[1],
-	 p->psa_call_code[2],
-	 p->psa_call_code[3],
-	 p->psa_call_code[4],
-	 p->psa_call_code[5],
-	 p->psa_call_code[6],
-	 p->psa_call_code[7]);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
-	 p->psa_reserved[0],
-	 p->psa_reserved[1]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
-  printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
-  printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
-} /* wv_psa_show */
-#endif	/* DEBUG_PSA_SHOW */
-
-#ifdef DEBUG_MMC_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the Modem Management Controller.
- * This function need to be completed...
- */
-static void
-wv_mmc_show(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  mmr_t		m;
-
-  /* Basic check */
-  if(hasr_read(base) & HASR_NO_CLK)
-    {
-      printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n",
-	     dev->name);
-      return;
-    }
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Read the mmc */
-  mmc_out(base, mmwoff(0, mmw_freeze), 1);
-  mmc_read(base, 0, (u_char *)&m, sizeof(m));
-  mmc_out(base, mmwoff(0, mmw_freeze), 0);
-
-  /* Don't forget to update statistics */
-  lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-	 m.mmr_unused0[0],
-	 m.mmr_unused0[1],
-	 m.mmr_unused0[2],
-	 m.mmr_unused0[3],
-	 m.mmr_unused0[4],
-	 m.mmr_unused0[5],
-	 m.mmr_unused0[6],
-	 m.mmr_unused0[7]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
-	 m.mmr_des_avail, m.mmr_des_status);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
-	 m.mmr_unused1[0],
-	 m.mmr_unused1[1],
-	 m.mmr_unused1[2],
-	 m.mmr_unused1[3],
-	 m.mmr_unused1[4]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
-	 m.mmr_dce_status,
-	 (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"",
-	 (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
-	 "loop test indicated," : "",
-	 (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "",
-	 (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
-	 "jabber timer expired," : "");
-  printk(KERN_DEBUG "Dsp ID: %02X\n",
-	 m.mmr_dsp_id);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
-	 m.mmr_unused2[0],
-	 m.mmr_unused2[1]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
-	 (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
-	 (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
-  printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
-	 m.mmr_thr_pre_set & MMR_THR_PRE_SET,
-	 (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below");
-  printk(KERN_DEBUG "signal_lvl: %d [%s], ",
-	 m.mmr_signal_lvl & MMR_SIGNAL_LVL,
-	 (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg");
-  printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL,
-	 (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update");
-  printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
-	 (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0");
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
-#endif	/* DEBUG_SHOW_UNUSED */
-} /* wv_mmc_show */
-#endif	/* DEBUG_MMC_SHOW */
-
-#ifdef DEBUG_I82593_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the i82593's receive unit.
- */
-static void
-wv_ru_show(struct net_device *	dev)
-{
-  net_local *lp = netdev_priv(dev);
-
-  printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n");
-  printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop);
-  /*
-   * Not implemented yet...
-   */
-  printk("\n");
-} /* wv_ru_show */
-#endif	/* DEBUG_I82593_SHOW */
-
-#ifdef DEBUG_DEVICE_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the WaveLAN PCMCIA device driver.
- */
-static void
-wv_dev_show(struct net_device *	dev)
-{
-  printk(KERN_DEBUG "dev:");
-  printk(" state=%lX,", dev->state);
-  printk(" trans_start=%ld,", dev->trans_start);
-  printk(" flags=0x%x,", dev->flags);
-  printk("\n");
-} /* wv_dev_show */
-
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the WaveLAN PCMCIA device driver's
- * private information.
- */
-static void
-wv_local_show(struct net_device *	dev)
-{
-  net_local *lp = netdev_priv(dev);
-
-  printk(KERN_DEBUG "local:");
-  /*
-   * Not implemented yet...
-   */
-  printk("\n");
-} /* wv_local_show */
-#endif	/* DEBUG_DEVICE_SHOW */
-
-#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
-/*------------------------------------------------------------------*/
-/*
- * Dump packet header (and content if necessary) on the screen
- */
-static void
-wv_packet_info(u_char *		p,		/* Packet to dump */
-	       int		length,		/* Length of the packet */
-	       char *		msg1,		/* Name of the device */
-	       char *		msg2)		/* Name of the function */
-{
-  int		i;
-  int		maxi;
-
-  printk(KERN_DEBUG "%s: %s(): dest %pM, length %d\n",
-	 msg1, msg2, p, length);
-  printk(KERN_DEBUG "%s: %s(): src %pM, type 0x%02X%02X\n",
-	 msg1, msg2, &p[6], p[12], p[13]);
-
-#ifdef DEBUG_PACKET_DUMP
-
-  printk(KERN_DEBUG "data=\"");
-
-  if((maxi = length) > DEBUG_PACKET_DUMP)
-    maxi = DEBUG_PACKET_DUMP;
-  for(i = 14; i < maxi; i++)
-    if(p[i] >= ' ' && p[i] <= '~')
-      printk(" %c", p[i]);
-    else
-      printk("%02X", p[i]);
-  if(maxi < length)
-    printk("..");
-  printk("\"\n");
-  printk(KERN_DEBUG "\n");
-#endif	/* DEBUG_PACKET_DUMP */
-}
-#endif	/* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
-
-/*------------------------------------------------------------------*/
-/*
- * This is the information which is displayed by the driver at startup
- * There  is a lot of flag to configure it at your will...
- */
-static void
-wv_init_info(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  psa_t		psa;
-
-  /* Read the parameter storage area */
-  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-
-#ifdef DEBUG_PSA_SHOW
-  wv_psa_show(&psa);
-#endif
-#ifdef DEBUG_MMC_SHOW
-  wv_mmc_show(dev);
-#endif
-#ifdef DEBUG_I82593_SHOW
-  wv_ru_show(dev);
-#endif
-
-#ifdef DEBUG_BASIC_SHOW
-  /* Now, let's go for the basic stuff */
-  printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, hw_addr %pM",
-	 dev->name, base, dev->irq, dev->dev_addr);
-
-  /* Print current network id */
-  if(psa.psa_nwid_select)
-    printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]);
-  else
-    printk(", nwid off");
-
-  /* If 2.00 card */
-  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-    {
-      unsigned short	freq;
-
-      /* Ask the EEprom to read the frequency from the first area */
-      fee_read(base, 0x00 /* 1st area - frequency... */,
-	       &freq, 1);
-
-      /* Print frequency */
-      printk(", 2.00, %ld", (freq >> 6) + 2400L);
-
-      /* Hack !!! */
-      if(freq & 0x20)
-	printk(".5");
-    }
-  else
-    {
-      printk(", PCMCIA, ");
-      switch (psa.psa_subband)
-	{
-	case PSA_SUBBAND_915:
-	  printk("915");
-	  break;
-	case PSA_SUBBAND_2425:
-	  printk("2425");
-	  break;
-	case PSA_SUBBAND_2460:
-	  printk("2460");
-	  break;
-	case PSA_SUBBAND_2484:
-	  printk("2484");
-	  break;
-	case PSA_SUBBAND_2430_5:
-	  printk("2430.5");
-	  break;
-	default:
-	  printk("unknown");
-	}
-    }
-
-  printk(" MHz\n");
-#endif	/* DEBUG_BASIC_SHOW */
-
-#ifdef DEBUG_VERSION_SHOW
-  /* Print version information */
-  printk(KERN_NOTICE "%s", version);
-#endif
-} /* wv_init_info */
-
-/********************* IOCTL, STATS & RECONFIG *********************/
-/*
- * We found here routines that are called by Linux on differents
- * occasions after the configuration and not for transmitting data
- * These may be called when the user use ifconfig, /proc/net/dev
- * or wireless extensions
- */
-
-
-/*------------------------------------------------------------------*/
-/*
- * Set or clear the multicast filter for this adaptor.
- * num_addrs == -1	Promiscuous mode, receive all packets
- * num_addrs == 0	Normal mode, clear multicast list
- * num_addrs > 0	Multicast mode, receive normal and MC packets,
- *			and do best-effort filtering.
- */
-
-static void
-wavelan_set_multicast_list(struct net_device *	dev)
-{
-  net_local *	lp = netdev_priv(dev);
-
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name);
-#endif
-
-#ifdef DEBUG_IOCTL_INFO
-  printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
-	 dev->name, dev->flags, dev->mc_count);
-#endif
-
-  if(dev->flags & IFF_PROMISC)
-    {
-      /*
-       * Enable promiscuous mode: receive all packets.
-       */
-      if(!lp->promiscuous)
-	{
-	  lp->promiscuous = 1;
-	  lp->allmulticast = 0;
-	  lp->mc_count = 0;
-
-	  wv_82593_reconfig(dev);
-	}
-    }
-  else
-    /* If all multicast addresses
-     * or too much multicast addresses for the hardware filter */
-    if((dev->flags & IFF_ALLMULTI) ||
-       (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
-      {
-	/*
-	 * Disable promiscuous mode, but active the all multicast mode
-	 */
-	if(!lp->allmulticast)
-	  {
-	    lp->promiscuous = 0;
-	    lp->allmulticast = 1;
-	    lp->mc_count = 0;
-
-	    wv_82593_reconfig(dev);
-	  }
-      }
-    else
-      /* If there is some multicast addresses to send */
-      if(dev->mc_list != (struct dev_mc_list *) NULL)
-	{
-	  /*
-	   * Disable promiscuous mode, but receive all packets
-	   * in multicast list
-	   */
-#ifdef MULTICAST_AVOID
-	  if(lp->promiscuous || lp->allmulticast ||
-	     (dev->mc_count != lp->mc_count))
-#endif
-	    {
-	      lp->promiscuous = 0;
-	      lp->allmulticast = 0;
-	      lp->mc_count = dev->mc_count;
-
-	      wv_82593_reconfig(dev);
-	    }
-	}
-      else
-	{
-	  /*
-	   * Switch to normal mode: disable promiscuous mode and 
-	   * clear the multicast list.
-	   */
-	  if(lp->promiscuous || lp->mc_count == 0)
-	    {
-	      lp->promiscuous = 0;
-	      lp->allmulticast = 0;
-	      lp->mc_count = 0;
-
-	      wv_82593_reconfig(dev);
-	    }
-	}
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This function doesn't exist...
- * (Note : it was a nice way to test the reconfigure stuff...)
- */
-#ifdef SET_MAC_ADDRESS
-static int
-wavelan_set_mac_address(struct net_device *	dev,
-			void *		addr)
-{
-  struct sockaddr *	mac = addr;
-
-  /* Copy the address */
-  memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
-
-  /* Reconfig the beast */
-  wv_82593_reconfig(dev);
-
-  return 0;
-}
-#endif	/* SET_MAC_ADDRESS */
-
-
-/*------------------------------------------------------------------*/
-/*
- * Frequency setting (for hardware able of it)
- * It's a bit complicated and you don't really want to look into it...
- */
-static int
-wv_set_frequency(u_long		base,	/* i/o port of the card */
-		 iw_freq *	frequency)
-{
-  const int	BAND_NUM = 10;	/* Number of bands */
-  long		freq = 0L;	/* offset to 2.4 GHz in .5 MHz */
-#ifdef DEBUG_IOCTL_INFO
-  int		i;
-#endif
-
-  /* Setting by frequency */
-  /* Theoritically, you may set any frequency between
-   * the two limits with a 0.5 MHz precision. In practice,
-   * I don't want you to have trouble with local
-   * regulations... */
-  if((frequency->e == 1) &&
-     (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8))
-    {
-      freq = ((frequency->m / 10000) - 24000L) / 5;
-    }
-
-  /* Setting by channel (same as wfreqsel) */
-  /* Warning : each channel is 22MHz wide, so some of the channels
-   * will interfere... */
-  if((frequency->e == 0) &&
-     (frequency->m >= 0) && (frequency->m < BAND_NUM))
-    {
-      /* Get frequency offset. */
-      freq = channel_bands[frequency->m] >> 1;
-    }
-
-  /* Verify if the frequency is allowed */
-  if(freq != 0L)
-    {
-      u_short	table[10];	/* Authorized frequency table */
-
-      /* Read the frequency table */
-      fee_read(base, 0x71 /* frequency table */,
-	       table, 10);
-
-#ifdef DEBUG_IOCTL_INFO
-      printk(KERN_DEBUG "Frequency table :");
-      for(i = 0; i < 10; i++)
-	{
-	  printk(" %04X",
-		 table[i]);
-	}
-      printk("\n");
-#endif
-
-      /* Look in the table if the frequency is allowed */
-      if(!(table[9 - ((freq - 24) / 16)] &
-	   (1 << ((freq - 24) % 16))))
-	return -EINVAL;		/* not allowed */
-    }
-  else
-    return -EINVAL;
-
-  /* If we get a usable frequency */
-  if(freq != 0L)
-    {
-      unsigned short	area[16];
-      unsigned short	dac[2];
-      unsigned short	area_verify[16];
-      unsigned short	dac_verify[2];
-      /* Corresponding gain (in the power adjust value table)
-       * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8
-       * & WCIN062D.DOC, page 6.2.9 */
-      unsigned short	power_limit[] = { 40, 80, 120, 160, 0 };
-      int		power_band = 0;		/* Selected band */
-      unsigned short	power_adjust;		/* Correct value */
-
-      /* Search for the gain */
-      power_band = 0;
-      while((freq > power_limit[power_band]) &&
-	    (power_limit[++power_band] != 0))
-	;
-
-      /* Read the first area */
-      fee_read(base, 0x00,
-	       area, 16);
-
-      /* Read the DAC */
-      fee_read(base, 0x60,
-	       dac, 2);
-
-      /* Read the new power adjust value */
-      fee_read(base, 0x6B - (power_band >> 1),
-	       &power_adjust, 1);
-      if(power_band & 0x1)
-	power_adjust >>= 8;
-      else
-	power_adjust &= 0xFF;
-
-#ifdef DEBUG_IOCTL_INFO
-      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
-      for(i = 0; i < 16; i++)
-	{
-	  printk(" %04X",
-		 area[i]);
-	}
-      printk("\n");
-
-      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
-	     dac[0], dac[1]);
-#endif
-
-      /* Frequency offset (for info only...) */
-      area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
-
-      /* Receiver Principle main divider coefficient */
-      area[3] = (freq >> 1) + 2400L - 352L;
-      area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
-
-      /* Transmitter Main divider coefficient */
-      area[13] = (freq >> 1) + 2400L;
-      area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
-
-      /* Others part of the area are flags, bit streams or unused... */
-
-      /* Set the value in the DAC */
-      dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
-      dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
-
-      /* Write the first area */
-      fee_write(base, 0x00,
-		area, 16);
-
-      /* Write the DAC */
-      fee_write(base, 0x60,
-		dac, 2);
-
-      /* We now should verify here that the EEprom writing was ok */
-
-      /* ReRead the first area */
-      fee_read(base, 0x00,
-	       area_verify, 16);
-
-      /* ReRead the DAC */
-      fee_read(base, 0x60,
-	       dac_verify, 2);
-
-      /* Compare */
-      if(memcmp(area, area_verify, 16 * 2) ||
-	 memcmp(dac, dac_verify, 2 * 2))
-	{
-#ifdef DEBUG_IOCTL_ERROR
-	  printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
-#endif
-	  return -EOPNOTSUPP;
-	}
-
-      /* We must download the frequency parameters to the
-       * synthetisers (from the EEprom - area 1)
-       * Note : as the EEprom is auto decremented, we set the end
-       * if the area... */
-      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F);
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
-	      MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
-
-      /* Wait until the download is finished */
-      fee_wait(base, 100, 100);
-
-      /* We must now download the power adjust value (gain) to
-       * the synthetisers (from the EEprom - area 7 - DAC) */
-      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61);
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
-	      MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
-
-      /* Wait until the download is finished */
-      fee_wait(base, 100, 100);
-
-#ifdef DEBUG_IOCTL_INFO
-      /* Verification of what we have done... */
-
-      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
-      for(i = 0; i < 16; i++)
-	{
-	  printk(" %04X",
-		 area_verify[i]);
-	}
-      printk("\n");
-
-      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
-	     dac_verify[0], dac_verify[1]);
-#endif
-
-      return 0;
-    }
-  else
-    return -EINVAL;		/* Bah, never get there... */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Give the list of available frequencies
- */
-static int
-wv_frequency_list(u_long	base,	/* i/o port of the card */
-		  iw_freq *	list,	/* List of frequency to fill */
-		  int		max)	/* Maximum number of frequencies */
-{
-  u_short	table[10];	/* Authorized frequency table */
-  long		freq = 0L;	/* offset to 2.4 GHz in .5 MHz + 12 MHz */
-  int		i;		/* index in the table */
-  const int	BAND_NUM = 10;	/* Number of bands */
-  int		c = 0;		/* Channel number */
-
-  /* Read the frequency table */
-  fee_read(base, 0x71 /* frequency table */,
-	   table, 10);
-
-  /* Look all frequencies */
-  i = 0;
-  for(freq = 0; freq < 150; freq++)
-    /* Look in the table if the frequency is allowed */
-    if(table[9 - (freq / 16)] & (1 << (freq % 16)))
-      {
-	/* Compute approximate channel number */
-	while((((channel_bands[c] >> 1) - 24) < freq) &&
-	      (c < BAND_NUM))
-	  c++;
-	list[i].i = c;	/* Set the list index */
-
-	/* put in the list */
-	list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
-	list[i++].e = 1;
-
-	/* Check number */
-	if(i >= max)
-	  return(i);
-      }
-
-  return(i);
-}
-
-#ifdef IW_WIRELESS_SPY
-/*------------------------------------------------------------------*/
-/*
- * Gather wireless spy statistics : for each packet, compare the source
- * address with out list, and if match, get the stats...
- * Sorry, but this function really need wireless extensions...
- */
-static inline void
-wl_spy_gather(struct net_device *	dev,
-	      u_char *	mac,		/* MAC address */
-	      u_char *	stats)		/* Statistics to gather */
-{
-  struct iw_quality wstats;
-
-  wstats.qual = stats[2] & MMR_SGNL_QUAL;
-  wstats.level = stats[0] & MMR_SIGNAL_LVL;
-  wstats.noise = stats[1] & MMR_SILENCE_LVL;
-  wstats.updated = 0x7;
-
-  /* Update spy records */
-  wireless_spy_update(dev, mac, &wstats);
-}
-#endif	/* IW_WIRELESS_SPY */
-
-#ifdef HISTOGRAM
-/*------------------------------------------------------------------*/
-/*
- * This function calculate an histogram on the signal level.
- * As the noise is quite constant, it's like doing it on the SNR.
- * We have defined a set of interval (lp->his_range), and each time
- * the level goes in that interval, we increment the count (lp->his_sum).
- * With this histogram you may detect if one wavelan is really weak,
- * or you may also calculate the mean and standard deviation of the level...
- */
-static inline void
-wl_his_gather(struct net_device *	dev,
-	      u_char *	stats)		/* Statistics to gather */
-{
-  net_local *	lp = netdev_priv(dev);
-  u_char	level = stats[0] & MMR_SIGNAL_LVL;
-  int		i;
-
-  /* Find the correct interval */
-  i = 0;
-  while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++]))
-    ;
-
-  /* Increment interval counter */
-  (lp->his_sum[i])++;
-}
-#endif	/* HISTOGRAM */
-
-static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1);
-}
-
-static const struct ethtool_ops ops = {
-	.get_drvinfo = wl_get_drvinfo
-};
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get protocol name
- */
-static int wavelan_get_name(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	strcpy(wrqu->name, "WaveLAN");
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set NWID
- */
-static int wavelan_set_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	mm_t m;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Set NWID in WaveLAN. */
-	if (!wrqu->nwid.disabled) {
-		/* Set NWID in psa */
-		psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
-		psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
-		psa.psa_nwid_select = 0x01;
-		psa_write(dev,
-			  (char *) psa.psa_nwid - (char *) &psa,
-			  (unsigned char *) psa.psa_nwid, 3);
-
-		/* Set NWID in mmc. */
-		m.w.mmw_netw_id_l = psa.psa_nwid[1];
-		m.w.mmw_netw_id_h = psa.psa_nwid[0];
-		mmc_write(base,
-			  (char *) &m.w.mmw_netw_id_l -
-			  (char *) &m,
-			  (unsigned char *) &m.w.mmw_netw_id_l, 2);
-		mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00);
-	} else {
-		/* Disable NWID in the psa. */
-		psa.psa_nwid_select = 0x00;
-		psa_write(dev,
-			  (char *) &psa.psa_nwid_select -
-			  (char *) &psa,
-			  (unsigned char *) &psa.psa_nwid_select,
-			  1);
-
-		/* Disable NWID in the mmc (no filtering). */
-		mmc_out(base, mmwoff(0, mmw_loopt_sel),
-			MMW_LOOPT_SEL_DIS_NWID);
-	}
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get NWID 
- */
-static int wavelan_get_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Read the NWID. */
-	psa_read(dev,
-		 (char *) psa.psa_nwid - (char *) &psa,
-		 (unsigned char *) psa.psa_nwid, 3);
-	wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
-	wrqu->nwid.disabled = !(psa.psa_nwid_select);
-	wrqu->nwid.fixed = 1;	/* Superfluous */
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set frequency
- */
-static int wavelan_set_freq(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ret;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
-	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-		ret = wv_set_frequency(base, &(wrqu->freq));
-	else
-		ret = -EOPNOTSUPP;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get frequency
- */
-static int wavelan_get_freq(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
-	 * Does it work for everybody, especially old cards? */
-	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		unsigned short freq;
-
-		/* Ask the EEPROM to read the frequency from the first area. */
-		fee_read(base, 0x00, &freq, 1);
-		wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
-		wrqu->freq.e = 1;
-	} else {
-		psa_read(dev,
-			 (char *) &psa.psa_subband - (char *) &psa,
-			 (unsigned char *) &psa.psa_subband, 1);
-
-		if (psa.psa_subband <= 4) {
-			wrqu->freq.m = fixed_bands[psa.psa_subband];
-			wrqu->freq.e = (psa.psa_subband != 0);
-		} else
-			ret = -EOPNOTSUPP;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set level threshold
- */
-static int wavelan_set_sens(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Set the level threshold. */
-	/* We should complain loudly if wrqu->sens.fixed = 0, because we
-	 * can't set auto mode... */
-	psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
-	psa_write(dev,
-		  (char *) &psa.psa_thr_pre_set - (char *) &psa,
-		  (unsigned char *) &psa.psa_thr_pre_set, 1);
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev);
-	mmc_out(base, mmwoff(0, mmw_thr_pre_set),
-		psa.psa_thr_pre_set);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get level threshold
- */
-static int wavelan_get_sens(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Read the level threshold. */
-	psa_read(dev,
-		 (char *) &psa.psa_thr_pre_set - (char *) &psa,
-		 (unsigned char *) &psa.psa_thr_pre_set, 1);
-	wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
-	wrqu->sens.fixed = 1;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set encryption key
- */
-static int wavelan_set_encode(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu,
-			      char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	psa_t psa;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Check if capable of encryption */
-	if (!mmc_encr(base)) {
-		ret = -EOPNOTSUPP;
-	}
-
-	/* Check the size of the key */
-	if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
-		ret = -EINVAL;
-	}
-
-	if(!ret) {
-		/* Basic checking... */
-		if (wrqu->encoding.length == 8) {
-			/* Copy the key in the driver */
-			memcpy(psa.psa_encryption_key, extra,
-			       wrqu->encoding.length);
-			psa.psa_encryption_select = 1;
-
-			psa_write(dev,
-				  (char *) &psa.psa_encryption_select -
-				  (char *) &psa,
-				  (unsigned char *) &psa.
-				  psa_encryption_select, 8 + 1);
-
-			mmc_out(base, mmwoff(0, mmw_encr_enable),
-				MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
-			mmc_write(base, mmwoff(0, mmw_encr_key),
-				  (unsigned char *) &psa.
-				  psa_encryption_key, 8);
-		}
-
-		/* disable encryption */
-		if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
-			psa.psa_encryption_select = 0;
-			psa_write(dev,
-				  (char *) &psa.psa_encryption_select -
-				  (char *) &psa,
-				  (unsigned char *) &psa.
-				  psa_encryption_select, 1);
-
-			mmc_out(base, mmwoff(0, mmw_encr_enable), 0);
-		}
-		/* update the Wavelan checksum */
-		update_psa_checksum(dev);
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get encryption key
- */
-static int wavelan_get_encode(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu,
-			      char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Check if encryption is available */
-	if (!mmc_encr(base)) {
-		ret = -EOPNOTSUPP;
-	} else {
-		/* Read the encryption key */
-		psa_read(dev,
-			 (char *) &psa.psa_encryption_select -
-			 (char *) &psa,
-			 (unsigned char *) &psa.
-			 psa_encryption_select, 1 + 8);
-
-		/* encryption is enabled ? */
-		if (psa.psa_encryption_select)
-			wrqu->encoding.flags = IW_ENCODE_ENABLED;
-		else
-			wrqu->encoding.flags = IW_ENCODE_DISABLED;
-		wrqu->encoding.flags |= mmc_encr(base);
-
-		/* Copy the key to the user buffer */
-		wrqu->encoding.length = 8;
-		memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-#ifdef WAVELAN_ROAMING_EXT
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set ESSID (domain)
- */
-static int wavelan_set_essid(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Check if disable */
-	if(wrqu->data.flags == 0)
-		lp->filter_domains = 0;
-	else {
-		char	essid[IW_ESSID_MAX_SIZE + 1];
-		char *	endp;
-
-		/* Terminate the string */
-		memcpy(essid, extra, wrqu->data.length);
-		essid[IW_ESSID_MAX_SIZE] = '\0';
-
-#ifdef DEBUG_IOCTL_INFO
-		printk(KERN_DEBUG "SetEssid : ``%s''\n", essid);
-#endif	/* DEBUG_IOCTL_INFO */
-
-		/* Convert to a number (note : Wavelan specific) */
-		lp->domain_id = simple_strtoul(essid, &endp, 16);
-		/* Has it worked  ? */
-		if(endp > essid)
-			lp->filter_domains = 1;
-		else {
-			lp->filter_domains = 0;
-			ret = -EINVAL;
-		}
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get ESSID (domain)
- */
-static int wavelan_get_essid(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-
-	/* Is the domain ID active ? */
-	wrqu->data.flags = lp->filter_domains;
-
-	/* Copy Domain ID into a string (Wavelan specific) */
-	/* Sound crazy, be we can't have a snprintf in the kernel !!! */
-	sprintf(extra, "%lX", lp->domain_id);
-	extra[IW_ESSID_MAX_SIZE] = '\0';
-
-	/* Set the length */
-	wrqu->data.length = strlen(extra);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set AP address
- */
-static int wavelan_set_wap(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-#ifdef DEBUG_IOCTL_INFO
-	printk(KERN_DEBUG "Set AP to : %pM\n", wrqu->ap_addr.sa_data);
-#endif	/* DEBUG_IOCTL_INFO */
-
-	return -EOPNOTSUPP;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get AP address
- */
-static int wavelan_get_wap(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	/* Should get the real McCoy instead of own Ethernet address */
-	memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE);
-	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
-
-	return -EOPNOTSUPP;
-}
-#endif	/* WAVELAN_ROAMING_EXT */
-
-#ifdef WAVELAN_ROAMING
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set mode
- */
-static int wavelan_set_mode(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Check mode */
-	switch(wrqu->mode) {
-	case IW_MODE_ADHOC:
-		if(do_roaming) {
-			wv_roam_cleanup(dev);
-			do_roaming = 0;
-		}
-		break;
-	case IW_MODE_INFRA:
-		if(!do_roaming) {
-			wv_roam_init(dev);
-			do_roaming = 1;
-		}
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get mode
- */
-static int wavelan_get_mode(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	if(do_roaming)
-		wrqu->mode = IW_MODE_INFRA;
-	else
-		wrqu->mode = IW_MODE_ADHOC;
-
-	return 0;
-}
-#endif	/* WAVELAN_ROAMING */
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get range info
- */
-static int wavelan_get_range(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	struct iw_range *range = (struct iw_range *) extra;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Set the length (very important for backward compatibility) */
-	wrqu->data.length = sizeof(struct iw_range);
-
-	/* Set all the info we don't care or don't know about to zero */
-	memset(range, 0, sizeof(struct iw_range));
-
-	/* Set the Wireless Extension versions */
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 9;
-
-	/* Set information in the range struct.  */
-	range->throughput = 1.4 * 1000 * 1000;	/* don't argue on this ! */
-	range->min_nwid = 0x0000;
-	range->max_nwid = 0xFFFF;
-
-	range->sensitivity = 0x3F;
-	range->max_qual.qual = MMR_SGNL_QUAL;
-	range->max_qual.level = MMR_SIGNAL_LVL;
-	range->max_qual.noise = MMR_SILENCE_LVL;
-	range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
-	/* Need to get better values for those two */
-	range->avg_qual.level = 30;
-	range->avg_qual.noise = 8;
-
-	range->num_bitrates = 1;
-	range->bitrate[0] = 2000000;	/* 2 Mb/s */
-
-	/* Event capability (kernel + driver) */
-	range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
-				IW_EVENT_CAPA_MASK(0x8B04) |
-				IW_EVENT_CAPA_MASK(0x8B06));
-	range->event_capa[1] = IW_EVENT_CAPA_K_1;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
-	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		range->num_channels = 10;
-		range->num_frequency = wv_frequency_list(base, range->freq,
-							IW_MAX_FREQUENCIES);
-	} else
-		range->num_channels = range->num_frequency = 0;
-
-	/* Encryption supported ? */
-	if (mmc_encr(base)) {
-		range->encoding_size[0] = 8;	/* DES = 64 bits key */
-		range->num_encoding_sizes = 1;
-		range->max_encoding_tokens = 1;	/* Only one key possible */
-	} else {
-		range->num_encoding_sizes = 0;
-		range->max_encoding_tokens = 0;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set quality threshold
- */
-static int wavelan_set_qthr(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	psa.psa_quality_thr = *(extra) & 0x0F;
-	psa_write(dev,
-		  (char *) &psa.psa_quality_thr - (char *) &psa,
-		  (unsigned char *) &psa.psa_quality_thr, 1);
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev);
-	mmc_out(base, mmwoff(0, mmw_quality_thr),
-		psa.psa_quality_thr);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get quality threshold
- */
-static int wavelan_get_qthr(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	psa_read(dev,
-		 (char *) &psa.psa_quality_thr - (char *) &psa,
-		 (unsigned char *) &psa.psa_quality_thr, 1);
-	*(extra) = psa.psa_quality_thr & 0x0F;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-#ifdef WAVELAN_ROAMING
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set roaming
- */
-static int wavelan_set_roam(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Note : should check if user == root */
-	if(do_roaming && (*extra)==0)
-		wv_roam_cleanup(dev);
-	else if(do_roaming==0 && (*extra)!=0)
-		wv_roam_init(dev);
-
-	do_roaming = (*extra);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get quality threshold
- */
-static int wavelan_get_roam(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	*(extra) = do_roaming;
-
-	return 0;
-}
-#endif	/* WAVELAN_ROAMING */
-
-#ifdef HISTOGRAM
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set histogram
- */
-static int wavelan_set_histo(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-
-	/* Check the number of intervals. */
-	if (wrqu->data.length > 16) {
-		return(-E2BIG);
-	}
-
-	/* Disable histo while we copy the addresses.
-	 * As we don't disable interrupts, we need to do this */
-	lp->his_number = 0;
-
-	/* Are there ranges to copy? */
-	if (wrqu->data.length > 0) {
-		/* Copy interval ranges to the driver */
-		memcpy(lp->his_range, extra, wrqu->data.length);
-
-		{
-		  int i;
-		  printk(KERN_DEBUG "Histo :");
-		  for(i = 0; i < wrqu->data.length; i++)
-		    printk(" %d", lp->his_range[i]);
-		  printk("\n");
-		}
-
-		/* Reset result structure. */
-		memset(lp->his_sum, 0x00, sizeof(long) * 16);
-	}
-
-	/* Now we can set the number of ranges */
-	lp->his_number = wrqu->data.length;
-
-	return(0);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get histogram
- */
-static int wavelan_get_histo(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-
-	/* Set the number of intervals. */
-	wrqu->data.length = lp->his_number;
-
-	/* Give back the distribution statistics */
-	if(lp->his_number > 0)
-		memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
-
-	return(0);
-}
-#endif			/* HISTOGRAM */
-
-/*------------------------------------------------------------------*/
-/*
- * Structures to export the Wireless Handlers
- */
-
-static const struct iw_priv_args wavelan_private_args[] = {
-/*{ cmd,         set_args,                            get_args, name } */
-  { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
-  { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
-  { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" },
-  { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" },
-  { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16,                    0, "sethisto" },
-  { SIOCGIPHISTO, 0,                     IW_PRIV_TYPE_INT | 16, "gethisto" },
-};
-
-static const iw_handler		wavelan_handler[] =
-{
-	NULL,				/* SIOCSIWNAME */
-	wavelan_get_name,		/* SIOCGIWNAME */
-	wavelan_set_nwid,		/* SIOCSIWNWID */
-	wavelan_get_nwid,		/* SIOCGIWNWID */
-	wavelan_set_freq,		/* SIOCSIWFREQ */
-	wavelan_get_freq,		/* SIOCGIWFREQ */
-#ifdef WAVELAN_ROAMING
-	wavelan_set_mode,		/* SIOCSIWMODE */
-	wavelan_get_mode,		/* SIOCGIWMODE */
-#else	/* WAVELAN_ROAMING */
-	NULL,				/* SIOCSIWMODE */
-	NULL,				/* SIOCGIWMODE */
-#endif	/* WAVELAN_ROAMING */
-	wavelan_set_sens,		/* SIOCSIWSENS */
-	wavelan_get_sens,		/* SIOCGIWSENS */
-	NULL,				/* SIOCSIWRANGE */
-	wavelan_get_range,		/* SIOCGIWRANGE */
-	NULL,				/* SIOCSIWPRIV */
-	NULL,				/* SIOCGIWPRIV */
-	NULL,				/* SIOCSIWSTATS */
-	NULL,				/* SIOCGIWSTATS */
-	iw_handler_set_spy,		/* SIOCSIWSPY */
-	iw_handler_get_spy,		/* SIOCGIWSPY */
-	iw_handler_set_thrspy,		/* SIOCSIWTHRSPY */
-	iw_handler_get_thrspy,		/* SIOCGIWTHRSPY */
-#ifdef WAVELAN_ROAMING_EXT
-	wavelan_set_wap,		/* SIOCSIWAP */
-	wavelan_get_wap,		/* SIOCGIWAP */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCGIWAPLIST */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	wavelan_set_essid,		/* SIOCSIWESSID */
-	wavelan_get_essid,		/* SIOCGIWESSID */
-#else	/* WAVELAN_ROAMING_EXT */
-	NULL,				/* SIOCSIWAP */
-	NULL,				/* SIOCGIWAP */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCGIWAPLIST */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWESSID */
-	NULL,				/* SIOCGIWESSID */
-#endif	/* WAVELAN_ROAMING_EXT */
-	NULL,				/* SIOCSIWNICKN */
-	NULL,				/* SIOCGIWNICKN */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWRATE */
-	NULL,				/* SIOCGIWRATE */
-	NULL,				/* SIOCSIWRTS */
-	NULL,				/* SIOCGIWRTS */
-	NULL,				/* SIOCSIWFRAG */
-	NULL,				/* SIOCGIWFRAG */
-	NULL,				/* SIOCSIWTXPOW */
-	NULL,				/* SIOCGIWTXPOW */
-	NULL,				/* SIOCSIWRETRY */
-	NULL,				/* SIOCGIWRETRY */
-	wavelan_set_encode,		/* SIOCSIWENCODE */
-	wavelan_get_encode,		/* SIOCGIWENCODE */
-};
-
-static const iw_handler		wavelan_private_handler[] =
-{
-	wavelan_set_qthr,		/* SIOCIWFIRSTPRIV */
-	wavelan_get_qthr,		/* SIOCIWFIRSTPRIV + 1 */
-#ifdef WAVELAN_ROAMING
-	wavelan_set_roam,		/* SIOCIWFIRSTPRIV + 2 */
-	wavelan_get_roam,		/* SIOCIWFIRSTPRIV + 3 */
-#else	/* WAVELAN_ROAMING */
-	NULL,				/* SIOCIWFIRSTPRIV + 2 */
-	NULL,				/* SIOCIWFIRSTPRIV + 3 */
-#endif	/* WAVELAN_ROAMING */
-#ifdef HISTOGRAM
-	wavelan_set_histo,		/* SIOCIWFIRSTPRIV + 4 */
-	wavelan_get_histo,		/* SIOCIWFIRSTPRIV + 5 */
-#endif	/* HISTOGRAM */
-};
-
-static const struct iw_handler_def	wavelan_handler_def =
-{
-	.num_standard	= ARRAY_SIZE(wavelan_handler),
-	.num_private	= ARRAY_SIZE(wavelan_private_handler),
-	.num_private_args = ARRAY_SIZE(wavelan_private_args),
-	.standard	= wavelan_handler,
-	.private	= wavelan_private_handler,
-	.private_args	= wavelan_private_args,
-	.get_wireless_stats = wavelan_get_wireless_stats,
-};
-
-/*------------------------------------------------------------------*/
-/*
- * Get wireless statistics
- * Called by /proc/net/wireless...
- */
-static iw_stats *
-wavelan_get_wireless_stats(struct net_device *	dev)
-{
-  unsigned int		base = dev->base_addr;
-  net_local *		lp = netdev_priv(dev);
-  mmr_t			m;
-  iw_stats *		wstats;
-  unsigned long		flags;
-
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
-#endif
-
-  /* Disable interrupts & save flags */
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  wstats = &lp->wstats;
-
-  /* Get data from the mmc */
-  mmc_out(base, mmwoff(0, mmw_freeze), 1);
-
-  mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
-  mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2);
-  mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4);
-
-  mmc_out(base, mmwoff(0, mmw_freeze), 0);
-
-  /* Copy data to wireless stuff */
-  wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
-  wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
-  wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
-  wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
-  wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) |
-			  ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) |
-			  ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
-  wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-  wstats->discard.code = 0L;
-  wstats->discard.misc = 0L;
-
-  /* ReEnable interrupts & restore flags */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
-#endif
-  return &lp->wstats;
-}
-
-/************************* PACKET RECEPTION *************************/
-/*
- * This part deal with receiving the packets.
- * The interrupt handler get an interrupt when a packet has been
- * successfully received and called this part...
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Calculate the starting address of the frame pointed to by the receive
- * frame pointer and verify that the frame seem correct
- * (called by wv_packet_rcv())
- */
-static int
-wv_start_of_frame(struct net_device *	dev,
-		  int		rfp,	/* end of frame */
-		  int		wrap)	/* start of buffer */
-{
-  unsigned int	base = dev->base_addr;
-  int		rp;
-  int		len;
-
-  rp = (rfp - 5 + RX_SIZE) % RX_SIZE;
-  outb(rp & 0xff, PIORL(base));
-  outb(((rp >> 8) & PIORH_MASK), PIORH(base));
-  len = inb(PIOP(base));
-  len |= inb(PIOP(base)) << 8;
-
-  /* Sanity checks on size */
-  /* Frame too big */
-  if(len > MAXDATAZ + 100)
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n",
-	     dev->name, rfp, len);
-#endif
-      return(-1);
-    }
-  
-  /* Frame too short */
-  if(len < 7)
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n",
-	     dev->name, rfp, len);
-#endif
-      return(-1);
-    }
-  
-  /* Wrap around buffer */
-  if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE))	/* magic formula ! */
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n",
-	     dev->name, wrap, rfp, len);
-#endif
-      return(-1);
-    }
-
-  return((rp - len + RX_SIZE) % RX_SIZE);
-} /* wv_start_of_frame */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does the actual copy of data (including the ethernet
- * header structure) from the WaveLAN card to an sk_buff chain that
- * will be passed up to the network interface layer. NOTE: We
- * currently don't handle trailer protocols (neither does the rest of
- * the network interface), so if that is needed, it will (at least in
- * part) be added here.  The contents of the receive ring buffer are
- * copied to a message chain that is then passed to the kernel.
- *
- * Note: if any errors occur, the packet is "dropped on the floor"
- * (called by wv_packet_rcv())
- */
-static void
-wv_packet_read(struct net_device *		dev,
-	       int		fd_p,
-	       int		sksize)
-{
-  net_local *		lp = netdev_priv(dev);
-  struct sk_buff *	skb;
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
-	 dev->name, fd_p, sksize);
-#endif
-
-  /* Allocate some buffer for the new packet */
-  if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL)
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n",
-	     dev->name, sksize);
-#endif
-      dev->stats.rx_dropped++;
-      /*
-       * Not only do we want to return here, but we also need to drop the
-       * packet on the floor to clear the interrupt.
-       */
-      return;
-    }
-
-  skb_reserve(skb, 2);
-  fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize);
-  skb->protocol = eth_type_trans(skb, dev);
-
-#ifdef DEBUG_RX_INFO
-  wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read");
-#endif	/* DEBUG_RX_INFO */
-     
-  /* Statistics gathering & stuff associated.
-   * It seem a bit messy with all the define, but it's really simple... */
-  if(
-#ifdef IW_WIRELESS_SPY
-     (lp->spy_data.spy_number > 0) ||
-#endif	/* IW_WIRELESS_SPY */
-#ifdef HISTOGRAM
-     (lp->his_number > 0) ||
-#endif	/* HISTOGRAM */
-#ifdef WAVELAN_ROAMING
-     (do_roaming) ||
-#endif	/* WAVELAN_ROAMING */
-     0)
-    {
-      u_char	stats[3];	/* Signal level, Noise level, Signal quality */
-
-      /* read signal level, silence level and signal quality bytes */
-      fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE,
-			  stats, 3);
-#ifdef DEBUG_RX_INFO
-      printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
-	     dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F);
-#endif
-
-#ifdef WAVELAN_ROAMING
-      if(do_roaming)
-	if(WAVELAN_BEACON(skb->data))
-	  wl_roam_gather(dev, skb->data, stats);
-#endif	/* WAVELAN_ROAMING */
-	  
-#ifdef WIRELESS_SPY
-      wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats);
-#endif	/* WIRELESS_SPY */
-#ifdef HISTOGRAM
-      wl_his_gather(dev, stats);
-#endif	/* HISTOGRAM */
-    }
-
-  /*
-   * Hand the packet to the Network Module
-   */
-  netif_rx(skb);
-
-  /* Keep stats up to date */
-  dev->stats.rx_packets++;
-  dev->stats.rx_bytes += sksize;
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
-#endif
-  return;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine is called by the interrupt handler to initiate a
- * packet transfer from the card to the network interface layer above
- * this driver.  This routine checks if a buffer has been successfully
- * received by the WaveLAN card.  If so, the routine wv_packet_read is
- * called to do the actual transfer of the card's data including the
- * ethernet header into a packet consisting of an sk_buff chain.
- * (called by wavelan_interrupt())
- * Note : the spinlock is already grabbed for us and irq are disabled.
- */
-static void
-wv_packet_rcv(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  int		newrfp;
-  int		rp;
-  int		len;
-  int		f_start;
-  int		status;
-  int		i593_rfp;
-  int		stat_ptr;
-  u_char	c[4];
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name);
-#endif
-
-  /* Get the new receive frame pointer from the i82593 chip */
-  outb(CR0_STATUS_2 | OP0_NOP, LCCR(base));
-  i593_rfp = inb(LCSR(base));
-  i593_rfp |= inb(LCSR(base)) << 8;
-  i593_rfp %= RX_SIZE;
-
-  /* Get the new receive frame pointer from the WaveLAN card.
-   * It is 3 bytes more than the increment of the i82593 receive
-   * frame pointer, for each packet. This is because it includes the
-   * 3 roaming bytes added by the mmc.
-   */
-  newrfp = inb(RPLL(base));
-  newrfp |= inb(RPLH(base)) << 8;
-  newrfp %= RX_SIZE;
-
-#ifdef DEBUG_RX_INFO
-  printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
-	 dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
-#endif
-
-#ifdef DEBUG_RX_ERROR
-  /* If no new frame pointer... */
-  if(lp->overrunning || newrfp == lp->rfp)
-    printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
-	   dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
-#endif
-
-  /* Read all frames (packets) received */
-  while(newrfp != lp->rfp)
-    {
-      /* A frame is composed of the packet, followed by a status word,
-       * the length of the frame (word) and the mmc info (SNR & qual).
-       * It's because the length is at the end that we can only scan
-       * frames backward. */
-
-      /* Find the first frame by skipping backwards over the frames */
-      rp = newrfp;	/* End of last frame */
-      while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) &&
-	    (f_start != -1))
-	  rp = f_start;
-
-      /* If we had a problem */
-      if(f_start == -1)
-	{
-#ifdef DEBUG_RX_ERROR
-	  printk(KERN_INFO "wavelan_cs: cannot find start of frame ");
-	  printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
-		 i593_rfp, lp->stop, newrfp, lp->rfp);
-#endif
-	  lp->rfp = rp;		/* Get to the last usable frame */
-	  continue;
-	}
-
-      /* f_start point to the beggining of the first frame received
-       * and rp to the beggining of the next one */
-
-      /* Read status & length of the frame */
-      stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE;
-      stat_ptr = read_ringbuf(dev, stat_ptr, c, 4);
-      status = c[0] | (c[1] << 8);
-      len = c[2] | (c[3] << 8);
-
-      /* Check status */
-      if((status & RX_RCV_OK) != RX_RCV_OK)
-	{
-	  dev->stats.rx_errors++;
-	  if(status & RX_NO_SFD)
-	    dev->stats.rx_frame_errors++;
-	  if(status & RX_CRC_ERR)
-	    dev->stats.rx_crc_errors++;
-	  if(status & RX_OVRRUN)
-	    dev->stats.rx_over_errors++;
-
-#ifdef DEBUG_RX_FAIL
-	  printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n",
-		 dev->name, status);
-#endif
-	}
-      else
-	/* Read the packet and transmit to Linux */
-	wv_packet_read(dev, f_start, len - 2);
-
-      /* One frame has been processed, skip it */
-      lp->rfp = rp;
-    }
-
-  /*
-   * Update the frame stop register, but set it to less than
-   * the full 8K to allow space for 3 bytes of signal strength
-   * per packet.
-   */
-  lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
-  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
-  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
-  outb(OP1_SWIT_TO_PORT_0, LCCR(base));
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name);
-#endif
-}
-
-/*********************** PACKET TRANSMISSION ***********************/
-/*
- * This part deal with sending packet through the wavelan
- * We copy the packet to the send buffer and then issue the send
- * command to the i82593. The result of this operation will be
- * checked in wavelan_interrupt()
- */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine fills in the appropriate registers and memory
- * locations on the WaveLAN card and starts the card off on
- * the transmit.
- * (called in wavelan_packet_xmit())
- */
-static void
-wv_packet_write(struct net_device *	dev,
-		void *		buf,
-		short		length)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned int		base = dev->base_addr;
-  unsigned long		flags;
-  int			clen = length;
-  register u_short	xmtdata_base = TX_BASE;
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
-#endif
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Write the length of data buffer followed by the buffer */
-  outb(xmtdata_base & 0xff, PIORL(base));
-  outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-  outb(clen & 0xff, PIOP(base));	/* lsb */
-  outb(clen >> 8, PIOP(base));  	/* msb */
-
-  /* Send the data */
-  outsb(PIOP(base), buf, clen);
-
-  /* Indicate end of transmit chain */
-  outb(OP0_NOP, PIOP(base));
-  /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */
-  outb(OP0_NOP, PIOP(base));
-
-  /* Reset the transmit DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write(base, HACR_DEFAULT);
-  /* Send the transmit command */
-  wv_82593_cmd(dev, "wv_packet_write(): transmit",
-	       OP0_TRANSMIT, SR0_NO_RESULT);
-
-  /* Make sure the watchdog will keep quiet for a while */
-  dev->trans_start = jiffies;
-
-  /* Keep stats up to date */
-  dev->stats.tx_bytes += length;
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_TX_INFO
-  wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
-#endif	/* DEBUG_TX_INFO */
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine is called when we want to send a packet (NET3 callback)
- * In this routine, we check if the harware is ready to accept
- * the packet. We also prevent reentrance. Then, we call the function
- * to send the packet...
- */
-static netdev_tx_t
-wavelan_packet_xmit(struct sk_buff *	skb,
-		    struct net_device *		dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned long		flags;
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
-	 (unsigned) skb);
-#endif
-
-  /*
-   * Block a timer-based transmit from overlapping a previous transmit.
-   * In other words, prevent reentering this routine.
-   */
-  netif_stop_queue(dev);
-
-  /* If somebody has asked to reconfigure the controller,
-   * we can do it now */
-  if(lp->reconfig_82593)
-    {
-      spin_lock_irqsave(&lp->spinlock, flags);	/* Disable interrupts */
-      wv_82593_config(dev);
-      spin_unlock_irqrestore(&lp->spinlock, flags);	/* Re-enable interrupts */
-      /* Note : the configure procedure was totally synchronous,
-       * so the Tx buffer is now free */
-    }
-
-	/* Check if we need some padding */
-	/* Note : on wireless the propagation time is in the order of 1us,
-	 * and we don't have the Ethernet specific requirement of beeing
-	 * able to detect collisions, therefore in theory we don't really
-	 * need to pad. Jean II */
-	if (skb_padto(skb, ETH_ZLEN))
-		return NETDEV_TX_OK;
-
-  wv_packet_write(dev, skb->data, skb->len);
-
-  dev_kfree_skb(skb);
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
-#endif
-  return NETDEV_TX_OK;
-}
-
-/********************** HARDWARE CONFIGURATION **********************/
-/*
- * This part do the real job of starting and configuring the hardware.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to initialize the Modem Management Controller.
- * (called by wv_hw_config())
- */
-static int
-wv_mmc_init(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  psa_t		psa;
-  mmw_t		m;
-  int		configured;
-  int		i;		/* Loop counter */
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
-#endif
-
-  /* Read the parameter storage area */
-  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-
-  /*
-   * Check the first three octets of the MAC addr for the manufacturer's code.
-   * Note: If you get the error message below, you've got a
-   * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
-   * how to configure your card...
-   */
-  for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
-    if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
-        (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
-        (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
-      break;
-
-  /* If we have not found it... */
-  if (i == ARRAY_SIZE(MAC_ADDRESSES))
-    {
-#ifdef DEBUG_CONFIG_ERRORS
-      printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
-	     dev->name, psa.psa_univ_mac_addr[0],
-	     psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]);
-#endif
-      return FALSE;
-    }
-
-  /* Get the MAC address */
-  memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE);
-
-#ifdef USE_PSA_CONFIG
-  configured = psa.psa_conf_status & 1;
-#else
-  configured = 0;
-#endif
-
-  /* Is the PSA is not configured */
-  if(!configured)
-    {
-      /* User will be able to configure NWID after (with iwconfig) */
-      psa.psa_nwid[0] = 0;
-      psa.psa_nwid[1] = 0;
-
-      /* As NWID is not set : no NWID checking */
-      psa.psa_nwid_select = 0;
-
-      /* Disable encryption */
-      psa.psa_encryption_select = 0;
-
-      /* Set to standard values
-       * 0x04 for AT,
-       * 0x01 for MCA,
-       * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
-       */
-      if (psa.psa_comp_number & 1)
-	psa.psa_thr_pre_set = 0x01;
-      else
-	psa.psa_thr_pre_set = 0x04;
-      psa.psa_quality_thr = 0x03;
-
-      /* It is configured */
-      psa.psa_conf_status |= 1;
-
-#ifdef USE_PSA_CONFIG
-      /* Write the psa */
-      psa_write(dev, (char *)psa.psa_nwid - (char *)&psa,
-		(unsigned char *)psa.psa_nwid, 4);
-      psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa,
-		(unsigned char *)&psa.psa_thr_pre_set, 1);
-      psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa,
-		(unsigned char *)&psa.psa_quality_thr, 1);
-      psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa,
-		(unsigned char *)&psa.psa_conf_status, 1);
-      /* update the Wavelan checksum */
-      update_psa_checksum(dev);
-#endif	/* USE_PSA_CONFIG */
-    }
-
-  /* Zero the mmc structure */
-  memset(&m, 0x00, sizeof(m));
-
-  /* Copy PSA info to the mmc */
-  m.mmw_netw_id_l = psa.psa_nwid[1];
-  m.mmw_netw_id_h = psa.psa_nwid[0];
-  
-  if(psa.psa_nwid_select & 1)
-    m.mmw_loopt_sel = 0x00;
-  else
-    m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
-
-  memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, 
-	 sizeof(m.mmw_encr_key));
-
-  if(psa.psa_encryption_select)
-    m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
-  else
-    m.mmw_encr_enable = 0;
-
-  m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
-  m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
-
-  /*
-   * Set default modem control parameters.
-   * See NCR document 407-0024326 Rev. A.
-   */
-  m.mmw_jabber_enable = 0x01;
-  m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
-  m.mmw_ifs = 0x20;
-  m.mmw_mod_delay = 0x04;
-  m.mmw_jam_time = 0x38;
-
-  m.mmw_des_io_invert = 0;
-  m.mmw_freeze = 0;
-  m.mmw_decay_prm = 0;
-  m.mmw_decay_updat_prm = 0;
-
-  /* Write all info to mmc */
-  mmc_write(base, 0, (u_char *)&m, sizeof(m));
-
-  /* The following code start the modem of the 2.00 frequency
-   * selectable cards at power on. It's not strictly needed for the
-   * following boots...
-   * The original patch was by Joe Finney for the PCMCIA driver, but
-   * I've cleaned it a bit and add documentation.
-   * Thanks to Loeke Brederveld from Lucent for the info.
-   */
-
-  /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
-   * (does it work for everybody ? - especially old cards...) */
-  /* Note : WFREQSEL verify that it is able to read from EEprom
-   * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
-   * is 0xA (Xilinx version) or 0xB (Ariadne version).
-   * My test is more crude but do work... */
-  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-    {
-      /* We must download the frequency parameters to the
-       * synthetisers (from the EEprom - area 1)
-       * Note : as the EEprom is auto decremented, we set the end
-       * if the area... */
-      m.mmw_fee_addr = 0x0F;
-      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
-      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
-		(unsigned char *)&m.mmw_fee_ctrl, 2);
-
-      /* Wait until the download is finished */
-      fee_wait(base, 100, 100);
-
-#ifdef DEBUG_CONFIG_INFO
-      /* The frequency was in the last word downloaded... */
-      mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m,
-	       (unsigned char *)&m.mmw_fee_data_l, 2);
-
-      /* Print some info for the user */
-      printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n",
-	     dev->name,
-	     ((m.mmw_fee_data_h << 4) |
-	      (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L);
-#endif
-
-      /* We must now download the power adjust value (gain) to
-       * the synthetisers (from the EEprom - area 7 - DAC) */
-      m.mmw_fee_addr = 0x61;
-      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
-      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
-		(unsigned char *)&m.mmw_fee_ctrl, 2);
-
-      /* Wait until the download is finished */
-    }	/* if 2.00 card */
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to gracefully turn off reception, and wait for any commands
- * to complete.
- * (called in wv_ru_start() and wavelan_close() and wavelan_event())
- */
-static int
-wv_ru_stop(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  unsigned long	flags;
-  int		status;
-  int		spin;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
-#endif
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* First, send the LAN controller a stop receive command */
-  wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
-	       OP0_STOP_RCV, SR0_NO_RESULT);
-
-  /* Then, spin until the receive unit goes idle */
-  spin = 300;
-  do
-    {
-      udelay(10);
-      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-      status = inb(LCSR(base));
-    }
-  while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));
-
-  /* Now, spin until the chip finishes executing its current command */
-  do
-    {
-      udelay(10);
-      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-      status = inb(LCSR(base));
-    }
-  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  /* If there was a problem */
-  if(spin <= 0)
-    {
-#ifdef DEBUG_CONFIG_ERRORS
-      printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
-	     dev->name);
-#endif
-      return FALSE;
-    }
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name);
-#endif
-  return TRUE;
-} /* wv_ru_stop */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine starts the receive unit running.  First, it checks if
- * the card is actually ready. Then the card is instructed to receive
- * packets again.
- * (called in wv_hw_reset() & wavelan_open())
- */
-static int
-wv_ru_start(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  unsigned long	flags;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
-#endif
-
-  /*
-   * We need to start from a quiescent state. To do so, we could check
-   * if the card is already running, but instead we just try to shut
-   * it down. First, we disable reception (in case it was already enabled).
-   */
-  if(!wv_ru_stop(dev))
-    return FALSE;
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Now we know that no command is being executed. */
-
-  /* Set the receive frame pointer and stop pointer */
-  lp->rfp = 0;
-  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
-
-  /* Reset ring management.  This sets the receive frame pointer to 1 */
-  outb(OP1_RESET_RING_MNGMT, LCCR(base));
-
-#if 0
-  /* XXX the i82593 manual page 6-4 seems to indicate that the stop register
-     should be set as below */
-  /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
-#elif 0
-  /* but I set it 0 instead */
-  lp->stop = 0;
-#else
-  /* but I set it to 3 bytes per packet less than 8K */
-  lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
-#endif
-  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
-  outb(OP1_INT_ENABLE, LCCR(base));
-  outb(OP1_SWIT_TO_PORT_0, LCCR(base));
-
-  /* Reset receive DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write_slow(base, HACR_DEFAULT);
-
-  /* Receive DMA on channel 1 */
-  wv_82593_cmd(dev, "wv_ru_start(): rcv-enable",
-	       CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT);
-
-#ifdef DEBUG_I82593_SHOW
-  {
-    int	status;
-    int	opri;
-    int	spin = 10000;
-
-    /* spin until the chip starts receiving */
-    do
-      {
-	outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-	status = inb(LCSR(base));
-	if(spin-- <= 0)
-	  break;
-      }
-    while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
-	  ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY));
-    printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n",
-	   (status & SR3_RCV_STATE_MASK), i);
-  }
-#endif
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does a standard config of the WaveLAN controller (i82593).
- * In the ISA driver, this is integrated in wavelan_hardware_reset()
- * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit())
- */
-static int
-wv_82593_config(struct net_device *	dev)
-{
-  unsigned int			base = dev->base_addr;
-  net_local *			lp = netdev_priv(dev);
-  struct i82593_conf_block	cfblk;
-  int				ret = TRUE;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
-#endif
-
-  /* Create & fill i82593 config block
-   *
-   * Now conform to Wavelan document WCIN085B
-   */
-  memset(&cfblk, 0x00, sizeof(struct i82593_conf_block));
-  cfblk.d6mod = FALSE;  	/* Run in i82593 advanced mode */
-  cfblk.fifo_limit = 5;         /* = 56 B rx and 40 B tx fifo thresholds */
-  cfblk.forgnesi = FALSE;       /* 0=82C501, 1=AMD7992B compatibility */
-  cfblk.fifo_32 = 1;
-  cfblk.throttle_enb = FALSE;
-  cfblk.contin = TRUE;          /* enable continuous mode */
-  cfblk.cntrxint = FALSE;       /* enable continuous mode receive interrupts */
-  cfblk.addr_len = WAVELAN_ADDR_SIZE;
-  cfblk.acloc = TRUE;           /* Disable source addr insertion by i82593 */
-  cfblk.preamb_len = 0;         /* 2 bytes preamble (SFD) */
-  cfblk.loopback = FALSE;
-  cfblk.lin_prio = 0;   	/* conform to 802.3 backoff algorithm */
-  cfblk.exp_prio = 5;	        /* conform to 802.3 backoff algorithm */
-  cfblk.bof_met = 1;	        /* conform to 802.3 backoff algorithm */
-  cfblk.ifrm_spc = 0x20 >> 4;	/* 32 bit times interframe spacing */
-  cfblk.slottim_low = 0x20 >> 5;	/* 32 bit times slot time */
-  cfblk.slottim_hi = 0x0;
-  cfblk.max_retr = 15;
-  cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE);	/* Promiscuous mode */
-  cfblk.bc_dis = FALSE;         /* Enable broadcast reception */
-  cfblk.crs_1 = TRUE;		/* Transmit without carrier sense */
-  cfblk.nocrc_ins = FALSE;	/* i82593 generates CRC */	
-  cfblk.crc_1632 = FALSE;	/* 32-bit Autodin-II CRC */
-  cfblk.crs_cdt = FALSE;	/* CD not to be interpreted as CS */
-  cfblk.cs_filter = 0;  	/* CS is recognized immediately */
-  cfblk.crs_src = FALSE;	/* External carrier sense */
-  cfblk.cd_filter = 0;  	/* CD is recognized immediately */
-  cfblk.min_fr_len = ETH_ZLEN >> 2;     /* Minimum frame length 64 bytes */
-  cfblk.lng_typ = FALSE;	/* Length field > 1500 = type field */
-  cfblk.lng_fld = TRUE; 	/* Disable 802.3 length field check */
-  cfblk.rxcrc_xf = TRUE;	/* Don't transfer CRC to memory */
-  cfblk.artx = TRUE;		/* Disable automatic retransmission */
-  cfblk.sarec = TRUE;		/* Disable source addr trig of CD */
-  cfblk.tx_jabber = TRUE;	/* Disable jabber jam sequence */
-  cfblk.hash_1 = FALSE; 	/* Use bits 0-5 in mc address hash */
-  cfblk.lbpkpol = TRUE; 	/* Loopback pin active high */
-  cfblk.fdx = FALSE;		/* Disable full duplex operation */
-  cfblk.dummy_6 = 0x3f; 	/* all ones */
-  cfblk.mult_ia = FALSE;	/* No multiple individual addresses */
-  cfblk.dis_bof = FALSE;	/* Disable the backoff algorithm ?! */
-  cfblk.dummy_1 = TRUE; 	/* set to 1 */
-  cfblk.tx_ifs_retrig = 3;	/* Hmm... Disabled */
-#ifdef MULTICAST_ALL
-  cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE);	/* Allow all multicasts */
-#else
-  cfblk.mc_all = FALSE;		/* No multicast all mode */
-#endif
-  cfblk.rcv_mon = 0;		/* Monitor mode disabled */
-  cfblk.frag_acpt = TRUE;	/* Do not accept fragments */
-  cfblk.tstrttrs = FALSE;	/* No start transmission threshold */
-  cfblk.fretx = TRUE;		/* FIFO automatic retransmission */
-  cfblk.syncrqs = FALSE; 	/* Synchronous DRQ deassertion... */
-  cfblk.sttlen = TRUE;  	/* 6 byte status registers */
-  cfblk.rx_eop = TRUE;  	/* Signal EOP on packet reception */
-  cfblk.tx_eop = TRUE;  	/* Signal EOP on packet transmission */
-  cfblk.rbuf_size = RX_SIZE>>11;	/* Set receive buffer size */
-  cfblk.rcvstop = TRUE; 	/* Enable Receive Stop Register */
-
-#ifdef DEBUG_I82593_SHOW
-  print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
-		 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
-#endif
-
-  /* Copy the config block to the i82593 */
-  outb(TX_BASE & 0xff, PIORL(base));
-  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-  outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base));    /* lsb */
-  outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base));	/* msb */
-  outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block));
-
-  /* reset transmit DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write(base, HACR_DEFAULT);
-  if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
-		   OP0_CONFIGURE, SR0_CONFIGURE_DONE))
-    ret = FALSE;
-
-  /* Initialize adapter's ethernet MAC address */
-  outb(TX_BASE & 0xff, PIORL(base));
-  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-  outb(WAVELAN_ADDR_SIZE, PIOP(base));	/* byte count lsb */
-  outb(0, PIOP(base));			/* byte count msb */
-  outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE);
-
-  /* reset transmit DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write(base, HACR_DEFAULT);
-  if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
-		   OP0_IA_SETUP, SR0_IA_SETUP_DONE))
-    ret = FALSE;
-
-#ifdef WAVELAN_ROAMING
-    /* If roaming is enabled, join the "Beacon Request" multicast group... */
-    /* But only if it's not in there already! */
-  if(do_roaming)
-    dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1);
-#endif	/* WAVELAN_ROAMING */
-
-  /* If any multicast address to set */
-  if(lp->mc_count)
-    {
-      struct dev_mc_list *	dmi;
-      int			addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;
-
-#ifdef DEBUG_CONFIG_INFO
-      printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
-	     dev->name, lp->mc_count);
-      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
-	printk(KERN_DEBUG " %pM\n", dmi->dmi_addr);
-#endif
-
-      /* Initialize adapter's ethernet multicast addresses */
-      outb(TX_BASE & 0xff, PIORL(base));
-      outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-      outb(addrs_len & 0xff, PIOP(base));	/* byte count lsb */
-      outb((addrs_len >> 8), PIOP(base));	/* byte count msb */
-      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
-	outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen);
-
-      /* reset transmit DMA pointer */
-      hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-      hacr_write(base, HACR_DEFAULT);
-      if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
-		       OP0_MC_SETUP, SR0_MC_SETUP_DONE))
-	ret = FALSE;
-      lp->mc_count = dev->mc_count;	/* remember to avoid repeated reset */
-    }
-
-  /* Job done, clear the flag */
-  lp->reconfig_82593 = FALSE;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
-#endif
-  return(ret);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Read the Access Configuration Register, perform a software reset,
- * and then re-enable the card's software.
- *
- * If I understand correctly : reset the pcmcia interface of the
- * wavelan.
- * (called by wv_config())
- */
-static int
-wv_pcmcia_reset(struct net_device *	dev)
-{
-  int		i;
-  conf_reg_t	reg = { 0, CS_READ, CISREG_COR, 0 };
-  struct pcmcia_device *	link = ((net_local *)netdev_priv(dev))->link;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name);
-#endif
-
-  i = pcmcia_access_configuration_register(link, &reg);
-  if (i != 0)
-    {
-      cs_error(link, AccessConfigurationRegister, i);
-      return FALSE;
-    }
-      
-#ifdef DEBUG_CONFIG_INFO
-  printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
-	 dev->name, (u_int) reg.Value);
-#endif
-
-  reg.Action = CS_WRITE;
-  reg.Value = reg.Value | COR_SW_RESET;
-  i = pcmcia_access_configuration_register(link, &reg);
-  if (i != 0)
-    {
-      cs_error(link, AccessConfigurationRegister, i);
-      return FALSE;
-    }
-      
-  reg.Action = CS_WRITE;
-  reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
-  i = pcmcia_access_configuration_register(link, &reg);
-  if (i != 0)
-    {
-      cs_error(link, AccessConfigurationRegister, i);
-      return FALSE;
-    }
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * wavelan_hw_config() is called after a CARD_INSERTION event is
- * received, to configure the wavelan hardware.
- * Note that the reception will be enabled in wavelan->open(), so the
- * device is configured but idle...
- * Performs the following actions:
- * 	1. A pcmcia software reset (using wv_pcmcia_reset())
- *	2. A power reset (reset DMA)
- *	3. Reset the LAN controller
- *	4. Initialize the radio modem (using wv_mmc_init)
- *	5. Configure LAN controller (using wv_82593_config)
- *	6. Perform a diagnostic on the LAN controller
- * (called by wavelan_event() & wv_hw_reset())
- */
-static int
-wv_hw_config(struct net_device *	dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned int		base = dev->base_addr;
-  unsigned long		flags;
-  int			ret = FALSE;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
-#endif
-
-  /* compile-time check the sizes of structures */
-  BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
-  BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
-  BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);
-
-  /* Reset the pcmcia interface */
-  if(wv_pcmcia_reset(dev) == FALSE)
-    return FALSE;
-
-  /* Disable interrupts */
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Disguised goto ;-) */
-  do
-    {
-      /* Power UP the module + reset the modem + reset host adapter
-       * (in fact, reset DMA channels) */
-      hacr_write_slow(base, HACR_RESET);
-      hacr_write(base, HACR_DEFAULT);
-
-      /* Check if the module has been powered up... */
-      if(hasr_read(base) & HASR_NO_CLK)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* initialize the modem */
-      if(wv_mmc_init(dev) == FALSE)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* reset the LAN controller (i82593) */
-      outb(OP0_RESET, LCCR(base));
-      mdelay(1);	/* A bit crude ! */
-
-      /* Initialize the LAN controller */
-      if(wv_82593_config(dev) == FALSE)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* Diagnostic */
-      if(wv_diag(dev) == FALSE)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* 
-       * insert code for loopback test here
-       */
-
-      /* The device is now configured */
-      lp->configured = 1;
-      ret = TRUE;
-    }
-  while(0);
-
-  /* Re-enable interrupts */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
-#endif
-  return(ret);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Totally reset the wavelan and restart it.
- * Performs the following actions:
- * 	1. Call wv_hw_config()
- *	2. Start the LAN controller's receive unit
- * (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
- */
-static void
-wv_hw_reset(struct net_device *	dev)
-{
-  net_local *	lp = netdev_priv(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
-#endif
-
-  lp->nresets++;
-  lp->configured = 0;
-  
-  /* Call wv_hw_config() for most of the reset & init stuff */
-  if(wv_hw_config(dev) == FALSE)
-    return;
-
-  /* start receive unit */
-  wv_ru_start(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * wv_pcmcia_config() is called after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet
- * device available to the system.
- * (called by wavelan_event())
- */
-static int
-wv_pcmcia_config(struct pcmcia_device *	link)
-{
-  struct net_device *	dev = (struct net_device *) link->priv;
-  int			i;
-  win_req_t		req;
-  memreq_t		mem;
-  net_local *		lp = netdev_priv(dev);
-
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link);
-#endif
-
-  do
-    {
-      i = pcmcia_request_io(link, &link->io);
-      if (i != 0)
-	{
-	  cs_error(link, RequestIO, i);
-	  break;
-	}
-
-      /*
-       * Now allocate an interrupt line.  Note that this does not
-       * actually assign a handler to the interrupt.
-       */
-      i = pcmcia_request_irq(link, &link->irq);
-      if (i != 0)
-	{
-	  cs_error(link, RequestIRQ, i);
-	  break;
-	}
-
-      /*
-       * This actually configures the PCMCIA socket -- setting up
-       * the I/O windows and the interrupt mapping.
-       */
-      link->conf.ConfigIndex = 1;
-      i = pcmcia_request_configuration(link, &link->conf);
-      if (i != 0)
-	{
-	  cs_error(link, RequestConfiguration, i);
-	  break;
-	}
-
-      /*
-       * Allocate a small memory window.  Note that the struct pcmcia_device
-       * structure provides space for one window handle -- if your
-       * device needs several windows, you'll need to keep track of
-       * the handles in your private data structure, link->priv.
-       */
-      req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
-      req.Base = req.Size = 0;
-      req.AccessSpeed = mem_speed;
-      i = pcmcia_request_window(&link, &req, &link->win);
-      if (i != 0)
-	{
-	  cs_error(link, RequestWindow, i);
-	  break;
-	}
-
-      lp->mem = ioremap(req.Base, req.Size);
-      dev->mem_start = (u_long)lp->mem;
-      dev->mem_end = dev->mem_start + req.Size;
-
-      mem.CardOffset = 0; mem.Page = 0;
-      i = pcmcia_map_mem_page(link->win, &mem);
-      if (i != 0)
-	{
-	  cs_error(link, MapMemPage, i);
-	  break;
-	}
-
-      /* Feed device with this info... */
-      dev->irq = link->irq.AssignedIRQ;
-      dev->base_addr = link->io.BasePort1;
-      netif_start_queue(dev);
-
-#ifdef DEBUG_CONFIG_INFO
-      printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n",
-	     lp->mem, dev->irq, (u_int) dev->base_addr);
-#endif
-
-      SET_NETDEV_DEV(dev, &handle_to_dev(link));
-      i = register_netdev(dev);
-      if(i != 0)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n");
-#endif
-	  break;
-	}
-    }
-  while(0);		/* Humm... Disguised goto !!! */
-
-  /* If any step failed, release any partially configured state */
-  if(i != 0)
-    {
-      wv_pcmcia_release(link);
-      return FALSE;
-    }
-
-  strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name);
-  link->dev_node = &((net_local *) netdev_priv(dev))->node;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "<-wv_pcmcia_config()\n");
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * After a card is removed, wv_pcmcia_release() will unregister the net
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
-static void
-wv_pcmcia_release(struct pcmcia_device *link)
-{
-	struct net_device *	dev = (struct net_device *) link->priv;
-	net_local *		lp = netdev_priv(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link);
-#endif
-
-	iounmap(lp->mem);
-	pcmcia_disable_device(link);
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
-#endif
-}
-
-/************************ INTERRUPT HANDLING ************************/
-
-/*
- * This function is the interrupt handler for the WaveLAN card. This
- * routine will be called whenever: 
- *	1. A packet is received.
- *	2. A packet has successfully been transferred and the unit is
- *	   ready to transmit another packet.
- *	3. A command has completed execution.
- */
-static irqreturn_t
-wavelan_interrupt(int		irq,
-		  void *	dev_id)
-{
-  struct net_device *	dev = dev_id;
-  net_local *	lp;
-  unsigned int	base;
-  int		status0;
-  u_int		tx_status;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
-#endif
-
-  lp = netdev_priv(dev);
-  base = dev->base_addr;
-
-#ifdef DEBUG_INTERRUPT_INFO
-  /* Check state of our spinlock (it should be cleared) */
-  if(spin_is_locked(&lp->spinlock))
-    printk(KERN_DEBUG
-	   "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
-	   dev->name);
-#endif
-
-  /* Prevent reentrancy. We need to do that because we may have
-   * multiple interrupt handler running concurently.
-   * It is safe because interrupts are disabled before aquiring
-   * the spinlock. */
-  spin_lock(&lp->spinlock);
-
-  /* Treat all pending interrupts */
-  while(1)
-    {
-      /* ---------------- INTERRUPT CHECKING ---------------- */
-      /*
-       * Look for the interrupt and verify the validity
-       */
-      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
-      status0 = inb(LCSR(base));
-
-#ifdef DEBUG_INTERRUPT_INFO
-      printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, 
-	     (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT);
-      if(status0&SR0_INTERRUPT)
-	{
-	  printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" :
-		 ((status0 & SR0_EXECUTION) ? "cmd" :
-		  ((status0 & SR0_RECEPTION) ? "recv" : "unknown")),
-		 (status0 & SR0_EVENT_MASK));
-	}
-      else
-	printk("\n");
-#endif
-
-      /* Return if no actual interrupt from i82593 (normal exit) */
-      if(!(status0 & SR0_INTERRUPT))
-	break;
-
-      /* If interrupt is both Rx and Tx or none...
-       * This code in fact is there to catch the spurious interrupt
-       * when you remove the wavelan pcmcia card from the socket */
-      if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) ||
-	 ((status0 & SR0_BOTH_RX_TX) == 0x0))
-	{
-#ifdef DEBUG_INTERRUPT_INFO
-	  printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n",
-		 dev->name, status0);
-#endif
-	  /* Acknowledge the interrupt */
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
-	  break;
-	}
-
-      /* ----------------- RECEIVING PACKET ----------------- */
-      /*
-       * When the wavelan signal the reception of a new packet,
-       * we call wv_packet_rcv() to copy if from the buffer and
-       * send it to NET3
-       */
-      if(status0 & SR0_RECEPTION)
-	{
-#ifdef DEBUG_INTERRUPT_INFO
-	  printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name);
-#endif
-
-	  if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT)
-	    {
-#ifdef DEBUG_INTERRUPT_ERROR
-	      printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n",
-		     dev->name);
-#endif
-	      dev->stats.rx_over_errors++;
-	      lp->overrunning = 1;
-      	    }
-
-	  /* Get the packet */
-	  wv_packet_rcv(dev);
-	  lp->overrunning = 0;
-
-	  /* Acknowledge the interrupt */
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
-	  continue;
-    	}
-
-      /* ---------------- COMMAND COMPLETION ---------------- */
-      /*
-       * Interrupts issued when the i82593 has completed a command.
-       * Most likely : transmission done
-       */
-
-      /* If a transmission has been done */
-      if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
-	 (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
-	 (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
-	{
-#ifdef DEBUG_TX_ERROR
-	  if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
-	    printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n",
-		   dev->name);
-#endif
-
-	  /* Get transmission status */
-	  tx_status = inb(LCSR(base));
-	  tx_status |= (inb(LCSR(base)) << 8);
-#ifdef DEBUG_INTERRUPT_INFO
-	  printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n",
-		 dev->name);
-	  {
-	    u_int	rcv_bytes;
-	    u_char	status3;
-	    rcv_bytes = inb(LCSR(base));
-	    rcv_bytes |= (inb(LCSR(base)) << 8);
-	    status3 = inb(LCSR(base));
-	    printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n",
-		   tx_status, rcv_bytes, (u_int) status3);
-	  }
-#endif
-	  /* Check for possible errors */
-	  if((tx_status & TX_OK) != TX_OK)
-	    {
-	      dev->stats.tx_errors++;
-
-	      if(tx_status & TX_FRTL)
-		{
-#ifdef DEBUG_TX_ERROR
-		  printk(KERN_INFO "%s: wv_interrupt(): frame too long\n",
-			 dev->name);
-#endif
-		}
-	      if(tx_status & TX_UND_RUN)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n",
-			 dev->name);
-#endif
-		  dev->stats.tx_aborted_errors++;
-		}
-	      if(tx_status & TX_LOST_CTS)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name);
-#endif
-		  dev->stats.tx_carrier_errors++;
-		}
-	      if(tx_status & TX_LOST_CRS)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n",
-			 dev->name);
-#endif
-		  dev->stats.tx_carrier_errors++;
-		}
-	      if(tx_status & TX_HRT_BEAT)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name);
-#endif
-		  dev->stats.tx_heartbeat_errors++;
-		}
-	      if(tx_status & TX_DEFER)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n",
-			 dev->name);
-#endif
-		}
-	      /* Ignore late collisions since they're more likely to happen
-	       * here (the WaveLAN design prevents the LAN controller from
-	       * receiving while it is transmitting). We take action only when
-	       * the maximum retransmit attempts is exceeded.
-	       */
-	      if(tx_status & TX_COLL)
-		{
-		  if(tx_status & TX_MAX_COL)
-		    {
-#ifdef DEBUG_TX_FAIL
-		      printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n",
-			     dev->name);
-#endif
-		      if(!(tx_status & TX_NCOL_MASK))
-			{
-			  dev->stats.collisions += 0x10;
-			}
-		    }
-		}
-	    }	/* if(!(tx_status & TX_OK)) */
-
-	  dev->stats.collisions += (tx_status & TX_NCOL_MASK);
-	  dev->stats.tx_packets++;
-
-	  netif_wake_queue(dev);
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));	/* Acknowledge the interrupt */
-    	} 
-      else	/* if interrupt = transmit done or retransmit done */
-	{
-#ifdef DEBUG_INTERRUPT_ERROR
-	  printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n",
-		 status0);
-#endif
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));	/* Acknowledge the interrupt */
-    	}
-    }	/* while(1) */
-
-  spin_unlock(&lp->spinlock);
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
-#endif
-
-  /* We always return IRQ_HANDLED, because we will receive empty
-   * interrupts under normal operations. Anyway, it doesn't matter
-   * as we are dealing with an ISA interrupt that can't be shared.
-   *
-   * Explanation : under heavy receive, the following happens :
-   * ->wavelan_interrupt()
-   *    (status0 & SR0_INTERRUPT) != 0
-   *       ->wv_packet_rcv()
-   *    (status0 & SR0_INTERRUPT) != 0
-   *       ->wv_packet_rcv()
-   *    (status0 & SR0_INTERRUPT) == 0	// i.e. no more event
-   * <-wavelan_interrupt()
-   * ->wavelan_interrupt()
-   *    (status0 & SR0_INTERRUPT) == 0	// i.e. empty interrupt
-   * <-wavelan_interrupt()
-   * Jean II */
-  return IRQ_HANDLED;
-} /* wv_interrupt */
-
-/*------------------------------------------------------------------*/
-/*
- * Watchdog: when we start a transmission, a timer is set for us in the
- * kernel.  If the transmission completes, this timer is disabled. If
- * the timer expires, we are called and we try to unlock the hardware.
- *
- * Note : This watchdog is move clever than the one in the ISA driver,
- * because it try to abort the current command before reseting
- * everything...
- * On the other hand, it's a bit simpler, because we don't have to
- * deal with the multiple Tx buffers...
- */
-static void
-wavelan_watchdog(struct net_device *	dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned int		base = dev->base_addr;
-  unsigned long		flags;
-  int			aborted = FALSE;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
-#endif
-
-#ifdef DEBUG_INTERRUPT_ERROR
-  printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
-	 dev->name);
-#endif
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Ask to abort the current command */
-  outb(OP0_ABORT, LCCR(base));
-
-  /* Wait for the end of the command (a bit hackish) */
-  if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
-		  OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
-    aborted = TRUE;
-
-  /* Release spinlock here so that wv_hw_reset() can grab it */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  /* Check if we were successful in aborting it */
-  if(!aborted)
-    {
-      /* It seem that it wasn't enough */
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n",
-	     dev->name);
-#endif
-      wv_hw_reset(dev);
-    }
-
-#ifdef DEBUG_PSA_SHOW
-  {
-    psa_t		psa;
-    psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-    wv_psa_show(&psa);
-  }
-#endif
-#ifdef DEBUG_MMC_SHOW
-  wv_mmc_show(dev);
-#endif
-#ifdef DEBUG_I82593_SHOW
-  wv_ru_show(dev);
-#endif
-
-  /* We are no more waiting for something... */
-  netif_wake_queue(dev);
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
-#endif
-}
-
-/********************* CONFIGURATION CALLBACKS *********************/
-/*
- * Here are the functions called by the pcmcia package (cardmgr) and
- * linux networking (NET3) for initialization, configuration and
- * deinstallations of the Wavelan Pcmcia Hardware.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Configure and start up the WaveLAN PCMCIA adaptor.
- * Called by NET3 when it "open" the device.
- */
-static int
-wavelan_open(struct net_device *	dev)
-{
-  net_local *	lp = netdev_priv(dev);
-  struct pcmcia_device *	link = lp->link;
-  unsigned int	base = dev->base_addr;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
-	 (unsigned int) dev);
-#endif
-
-  /* Check if the modem is powered up (wavelan_close() power it down */
-  if(hasr_read(base) & HASR_NO_CLK)
-    {
-      /* Power up (power up time is 250us) */
-      hacr_write(base, HACR_DEFAULT);
-
-      /* Check if the module has been powered up... */
-      if(hasr_read(base) & HASR_NO_CLK)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n",
-		 dev->name);
-#endif
-	  return FALSE;
-	}
-    }
-
-  /* Start reception and declare the driver ready */
-  if(!lp->configured)
-    return FALSE;
-  if(!wv_ru_start(dev))
-    wv_hw_reset(dev);		/* If problem : reset */
-  netif_start_queue(dev);
-
-  /* Mark the device as used */
-  link->open++;
-
-#ifdef WAVELAN_ROAMING
-  if(do_roaming)
-    wv_roam_init(dev);
-#endif	/* WAVELAN_ROAMING */
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
-#endif
-  return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Shutdown the WaveLAN PCMCIA adaptor.
- * Called by NET3 when it "close" the device.
- */
-static int
-wavelan_close(struct net_device *	dev)
-{
-  struct pcmcia_device *	link = ((net_local *)netdev_priv(dev))->link;
-  unsigned int	base = dev->base_addr;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
-	 (unsigned int) dev);
-#endif
-
-  /* If the device isn't open, then nothing to do */
-  if(!link->open)
-    {
-#ifdef DEBUG_CONFIG_INFO
-      printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name);
-#endif
-      return 0;
-    }
-
-#ifdef WAVELAN_ROAMING
-  /* Cleanup of roaming stuff... */
-  if(do_roaming)
-    wv_roam_cleanup(dev);
-#endif	/* WAVELAN_ROAMING */
-
-  link->open--;
-
-  /* If the card is still present */
-  if(netif_running(dev))
-    {
-      netif_stop_queue(dev);
-
-      /* Stop receiving new messages and wait end of transmission */
-      wv_ru_stop(dev);
-
-      /* Power down the module */
-      hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT));
-    }
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
-#endif
-  return 0;
-}
-
-static const struct net_device_ops wavelan_netdev_ops = {
-	.ndo_open 		= wavelan_open,
-	.ndo_stop		= wavelan_close,
-	.ndo_start_xmit		= wavelan_packet_xmit,
-	.ndo_set_multicast_list = wavelan_set_multicast_list,
-#ifdef SET_MAC_ADDRESS
-	.ndo_set_mac_address	= wavelan_set_mac_address,
-#endif
-	.ndo_tx_timeout		= wavelan_watchdog,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/*------------------------------------------------------------------*/
-/*
- * wavelan_attach() creates an "instance" of the driver, allocating
- * local data structures for one device (one interface).  The device
- * is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a
- * card insertion event.
- */
-static int
-wavelan_probe(struct pcmcia_device *p_dev)
-{
-  struct net_device *	dev;		/* Interface generic data */
-  net_local *	lp;		/* Interface specific data */
-  int ret;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "-> wavelan_attach()\n");
-#endif
-
-  /* The io structure describes IO port mapping */
-  p_dev->io.NumPorts1 = 8;
-  p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-  p_dev->io.IOAddrLines = 3;
-
-  /* Interrupt setup */
-  p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-  p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-  p_dev->irq.Handler = wavelan_interrupt;
-
-  /* General socket configuration */
-  p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-  p_dev->conf.IntType = INT_MEMORY_AND_IO;
-
-  /* Allocate the generic data structure */
-  dev = alloc_etherdev(sizeof(net_local));
-  if (!dev)
-      return -ENOMEM;
-
-  p_dev->priv = p_dev->irq.Instance = dev;
-
-  lp = netdev_priv(dev);
-
-  /* Init specific data */
-  lp->configured = 0;
-  lp->reconfig_82593 = FALSE;
-  lp->nresets = 0;
-  /* Multicast stuff */
-  lp->promiscuous = 0;
-  lp->allmulticast = 0;
-  lp->mc_count = 0;
-
-  /* Init spinlock */
-  spin_lock_init(&lp->spinlock);
-
-  /* back links */
-  lp->dev = dev;
-
-  /* wavelan NET3 callbacks */
-  dev->netdev_ops = &wavelan_netdev_ops;
-  dev->watchdog_timeo	= WATCHDOG_JIFFIES;
-  SET_ETHTOOL_OPS(dev, &ops);
-
-  dev->wireless_handlers = &wavelan_handler_def;
-  lp->wireless_data.spy_data = &lp->spy_data;
-  dev->wireless_data = &lp->wireless_data;
-
-  /* Other specific data */
-  dev->mtu = WAVELAN_MTU;
-
-  ret = wv_pcmcia_config(p_dev);
-  if (ret)
-	  return ret;
-
-  ret = wv_hw_config(dev);
-  if (ret) {
-	  dev->irq = 0;
-	  pcmcia_disable_device(p_dev);
-	  return ret;
-  }
-
-  wv_init_info(dev);
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "<- wavelan_attach()\n");
-#endif
-
-  return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This deletes a driver "instance".  The device is de-registered with
- * Card Services.  If it has been released, all local data structures
- * are freed.  Otherwise, the structures will be freed when the device
- * is released.
- */
-static void
-wavelan_detach(struct pcmcia_device *link)
-{
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
-#endif
-
-  /* Some others haven't done their job : give them another chance */
-  wv_pcmcia_release(link);
-
-  /* Free pieces */
-  if(link->priv)
-    {
-      struct net_device *	dev = (struct net_device *) link->priv;
-
-      /* Remove ourselves from the kernel list of ethernet devices */
-      /* Warning : can't be called from interrupt, timer or wavelan_close() */
-      if (link->dev_node)
-	unregister_netdev(dev);
-      link->dev_node = NULL;
-      ((net_local *)netdev_priv(dev))->link = NULL;
-      ((net_local *)netdev_priv(dev))->dev = NULL;
-      free_netdev(dev);
-    }
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "<- wavelan_detach()\n");
-#endif
-}
-
-static int wavelan_suspend(struct pcmcia_device *link)
-{
-	struct net_device *	dev = (struct net_device *) link->priv;
-
-	/* NB: wavelan_close will be called, but too late, so we are
-	 * obliged to close nicely the wavelan here. David, could you
-	 * close the device before suspending them ? And, by the way,
-	 * could you, on resume, add a "route add -net ..." after the
-	 * ifconfig up ? Thanks... */
-
-	/* Stop receiving new messages and wait end of transmission */
-	wv_ru_stop(dev);
-
-	if (link->open)
-		netif_device_detach(dev);
-
-	/* Power down the module */
-	hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
-
-	return 0;
-}
-
-static int wavelan_resume(struct pcmcia_device *link)
-{
-	struct net_device *	dev = (struct net_device *) link->priv;
-
-	if (link->open) {
-		wv_hw_reset(dev);
-		netif_device_attach(dev);
-	}
-
-	return 0;
-}
-
-
-static struct pcmcia_device_id wavelan_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
-	PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
-	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975),
-	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, wavelan_ids);
-
-static struct pcmcia_driver wavelan_driver = {
-	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "wavelan_cs",
-	},
-	.probe		= wavelan_probe,
-	.remove		= wavelan_detach,
-	.id_table       = wavelan_ids,
-	.suspend	= wavelan_suspend,
-	.resume		= wavelan_resume,
-};
-
-static int __init
-init_wavelan_cs(void)
-{
-	return pcmcia_register_driver(&wavelan_driver);
-}
-
-static void __exit
-exit_wavelan_cs(void)
-{
-	pcmcia_unregister_driver(&wavelan_driver);
-}
-
-module_init(init_wavelan_cs);
-module_exit(exit_wavelan_cs);
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
deleted file mode 100644
index 81d9153..0000000
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- *	Wavelan Pcmcia driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- *
- * This file contain all definition and declarations necessary for the
- * wavelan pcmcia driver. This file is a private header, so it should
- * be included only on wavelan_cs.c !!!
- */
-
-#ifndef WAVELAN_CS_P_H
-#define WAVELAN_CS_P_H
-
-/************************** DOCUMENTATION **************************/
-/*
- * This driver provide a Linux interface to the Wavelan Pcmcia hardware
- * The Wavelan is a product of Lucent (http://www.wavelan.com/).
- * This division was formerly part of NCR and then AT&T.
- * Wavelan are also distributed by DEC (RoamAbout DS)...
- *
- * To know how to use this driver, read the PCMCIA HOWTO.
- * If you want to exploit the many other fonctionalities, look comments
- * in the code...
- *
- * This driver is the result of the effort of many peoples (see below).
- */
-
-/* ------------------------ SPECIFIC NOTES ------------------------ */
-/*
- * Web page
- * --------
- *	I try to maintain a web page with the Wireless LAN Howto at :
- *	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
- *
- * SMP
- * ---
- *	We now are SMP compliant (I eventually fixed the remaining bugs).
- *	The driver has been tested on a dual P6-150 and survived my usual
- *	set of torture tests.
- *	Anyway, I spent enough time chasing interrupt re-entrancy during
- *	errors or reconfigure, and I designed the locked/unlocked sections
- *	of the driver with great care, and with the recent addition of
- *	the spinlock (thanks to the new API), we should be quite close to
- *	the truth.
- *	The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
- *	but better safe than sorry (especially at 2 Mb/s ;-).
- *
- *	I have also looked into disabling only our interrupt on the card
- *	(via HACR) instead of all interrupts in the processor (via cli),
- *	so that other driver are not impacted, and it look like it's
- *	possible, but it's very tricky to do right (full of races). As
- *	the gain would be mostly for SMP systems, it can wait...
- *
- * Debugging and options
- * ---------------------
- *	You will find below a set of '#define" allowing a very fine control
- *	on the driver behaviour and the debug messages printed.
- *	The main options are :
- *	o WAVELAN_ROAMING, for the experimental roaming support.
- *	o SET_PSA_CRC, to have your card correctly recognised by
- *	  an access point and the Point-to-Point diagnostic tool.
- *	o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
- *	  (otherwise we always start afresh with some defaults)
- *
- * wavelan_cs.o is darn too big
- * -------------------------
- *	That's true ! There is a very simple way to reduce the driver
- *	object by 33% (yes !). Comment out the following line :
- *		#include <linux/wireless.h>
- *	Other compile options can also reduce the size of it...
- *
- * MAC address and hardware detection :
- * ----------------------------------
- *	The detection code of the wavelan chech that the first 3
- *	octets of the MAC address fit the company code. This type of
- *	detection work well for AT&T cards (because the AT&T code is
- *	hardcoded in wavelan_cs.h), but of course will fail for other
- *	manufacturer.
- *
- *	If you are sure that your card is derived from the wavelan,
- *	here is the way to configure it :
- *	1) Get your MAC address
- *		a) With your card utilities (wfreqsel, instconf, ...)
- *		b) With the driver :
- *			o compile the kernel with DEBUG_CONFIG_INFO enabled
- *			o Boot and look the card messages
- *	2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h)
- *	3) Compile & verify
- *	4) Send me the MAC code - I will include it in the next version...
- *
- */
-
-/* --------------------- WIRELESS EXTENSIONS --------------------- */
-/*
- * This driver is the first one to support "wireless extensions".
- * This set of extensions provide you some way to control the wireless
- * caracteristics of the hardware in a standard way and support for
- * applications for taking advantage of it (like Mobile IP).
- *
- * It might be a good idea as well to fetch the wireless tools to
- * configure the device and play a bit.
- */
-
-/* ---------------------------- FILES ---------------------------- */
-/*
- * wavelan_cs.c :	The actual code for the driver - C functions
- *
- * wavelan_cs.p.h :	Private header : local types / vars for the driver
- *
- * wavelan_cs.h :	Description of the hardware interface & structs
- *
- * i82593.h :		Description if the Ethernet controller
- */
-
-/* --------------------------- HISTORY --------------------------- */
-/*
- * The history of the Wavelan drivers is as complicated as history of
- * the Wavelan itself (NCR -> AT&T -> Lucent).
- *
- * All started with Anders Klemets <klemets@paul.rutgers.edu>,
- * writing a Wavelan ISA driver for the MACH microkernel. Girish
- * Welling <welling@paul.rutgers.edu> had also worked on it.
- * Keith Moore modify this for the Pcmcia hardware.
- * 
- * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
- * and add specific Pcmcia support (there is currently no equivalent
- * of the PCMCIA package under BSD...).
- *
- * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
- *
- * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
- *
- * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
- * (with help of the BSDI PCMCIA driver) for PCMCIA.
- * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
- * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
- * correctly 2.00 cards (2.4 GHz with frequency selection).
- * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
- * Pcmcia package (+ bug corrections).
- *
- * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
- * patchs to the Pcmcia driver. After, I added code in the ISA driver
- * for Wireless Extensions and full support of frequency selection
- * cards. Now, I'm doing the same to the Pcmcia driver + some
- * reorganisation.
- * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
- * much needed informations on the Wavelan hardware.
- */
-
-/* By the way : for the copyright & legal stuff :
- * Almost everybody wrote code under GNU or BSD license (or alike),
- * and want that their original copyright remain somewhere in the
- * code (for myself, I go with the GPL).
- * Nobody want to take responsibility for anything, except the fame...
- */
-
-/* --------------------------- CREDITS --------------------------- */
-/*
- * Credits:
- *    Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
- *	Loeke Brederveld of Lucent for providing extremely useful
- *	information about WaveLAN PCMCIA hardware
- *
- *    This driver is based upon several other drivers, in particular:
- *	David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
- *	Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
- *	Anders Klemets' PCMCIA WaveLAN adapter driver
- *	Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
- *
- * Additional Credits:
- *
- *    This software was originally developed under Linux 1.2.3
- *	(Slackware 2.0 distribution).
- *    And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+)
- *	with an HP OmniBook 4000 and then a 5500.
- *
- *    It is based on other device drivers and information either written
- *    or supplied by:
- *	James Ashton (jaa101@syseng.anu.edu.au),
- *	Ajay Bakre (bakre@paul.rutgers.edu),
- *	Donald Becker (becker@super.org),
- *	Jim Binkley <jrb@cs.pdx.edu>,
- *	Loeke Brederveld <lbrederv@wavelan.com>,
- *	Allan Creighton (allanc@cs.su.oz.au),
- *	Brent Elphick <belphick@uwaterloo.ca>,
- *	Joe Finney <joe@comp.lancs.ac.uk>,
- *	Matthew Geier (matthew@cs.su.oz.au),
- *	Remo di Giovanni (remo@cs.su.oz.au),
- *	Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
- *	David Hinds <dahinds@users.sourceforge.net>,
- *	Jan Hoogendoorn (c/o marteijn@lucent.com),
- *      Bruce Janson <bruce@cs.usyd.edu.au>,
- *	Anthony D. Joseph <adj@lcs.mit.edu>,
- *	Anders Klemets (klemets@paul.rutgers.edu),
- *	Yunzhou Li <yunzhou@strat.iol.unh.edu>,
- *	Marc Meertens (mmeertens@lucent.com),
- *	Keith Moore,
- *	Robert Morris (rtm@das.harvard.edu),
- *	Ian Parkin (ian@cs.su.oz.au),
- *	John Rosenberg (johnr@cs.su.oz.au),
- *	George Rossi (george@phm.gov.au),
- *	Arthur Scott (arthur@cs.su.oz.au),
- *	Stanislav Sinyagin <stas@isf.ru>
- *	Peter Storey,
- *	Jean Tourrilhes <jt@hpl.hp.com>,
- *	Girish Welling (welling@paul.rutgers.edu)
- *	Clark Woodworth <clark@hiway1.exit109.com>
- *	Yongguang Zhang <ygz@isl.hrl.hac.com>...
- */
-
-/* ------------------------- IMPROVEMENTS ------------------------- */
-/*
- * I proudly present :
- *
- * Changes made in 2.8.22 :
- * ----------------------
- *	- improved wv_set_multicast_list
- *	- catch spurious interrupt
- *	- correct release of the device
- *
- * Changes mades in release :
- * ------------------------
- *	- Reorganisation of the code, function name change
- *	- Creation of private header (wavelan_cs.h)
- *	- Reorganised debug messages
- *	- More comments, history, ...
- *	- Configure earlier (in "insert" instead of "open")
- *        and do things only once
- *	- mmc_init : configure the PSA if not done
- *	- mmc_init : 2.00 detection better code for 2.00 init
- *	- better info at startup
- *	- Correct a HUGE bug (volatile & uncalibrated busy loop)
- *	  in wv_82593_cmd => config speedup
- *	- Stop receiving & power down on close (and power up on open)
- *	  use "ifconfig down" & "ifconfig up ; route add -net ..."
- *	- Send packets : add watchdog instead of pooling
- *	- Receive : check frame wrap around & try to recover some frames
- *	- wavelan_set_multicast_list : avoid reset
- *	- add wireless extensions (ioctl & get_wireless_stats)
- *	  get/set nwid/frequency on fly, info for /proc/net/wireless
- *	- Suppress useless stuff from lp (net_local), but add link
- *	- More inlines
- *	- Lot of others minor details & cleanups
- *
- * Changes made in second release :
- * ------------------------------
- *	- Optimise wv_85893_reconfig stuff, fix potential problems
- *	- Change error values for ioctl
- *	- Non blocking wv_ru_stop() + call wv_reset() in case of problems
- *	- Remove development printk from wavelan_watchdog()
- *	- Remove of the watchdog to wavelan_close instead of wavelan_release
- *	  fix potential problems...
- *	- Start debugging suspend stuff (but it's still a bit weird)
- *	- Debug & optimize dump header/packet in Rx & Tx (debug)
- *	- Use "readb" and "writeb" to be kernel 2.1 compliant
- *	- Better handling of bogus interrupts
- *	- Wireless extension : SETSPY and GETSPY
- *	- Remove old stuff (stats - for those needing it, just ask me...)
- *	- Make wireless extensions optional
- *
- * Changes made in third release :
- * -----------------------------
- *	- cleanups & typos
- *	- modif wireless ext (spy -> only one pointer)
- *	- new private ioctl to set/get quality & level threshold
- *	- Init : correct default value of level threshold for pcmcia
- *	- kill watchdog in hw_reset
- *	- more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
- *	- Add message level (debug stuff in /var/adm/debug & errors not
- *	  displayed at console and still in /var/adm/messages)
- *
- * Changes made in fourth release :
- * ------------------------------
- *	- multicast support (yes !) thanks to Yongguang Zhang.
- *
- * Changes made in fifth release (2.9.0) :
- * -------------------------------------
- *	- Revisited multicast code (it was mostly wrong).
- *	- protect code in wv_82593_reconfig with dev->tbusy (oups !)
- *
- * Changes made in sixth release (2.9.1a) :
- * --------------------------------------
- *	- Change the detection code for multi manufacturer code support
- *	- Correct bug (hang kernel) in init when we were "rejecting" a card 
- *
- * Changes made in seventh release (2.9.1b) :
- * ----------------------------------------
- *	- Update to wireless extensions changes
- *	- Silly bug in card initial configuration (psa_conf_status)
- *
- * Changes made in eigth release :
- * -----------------------------
- *	- Small bug in debug code (probably not the last one...)
- *	- 1.2.13 support (thanks to Clark Woodworth)
- *
- * Changes made for release in 2.9.2b :
- * ----------------------------------
- *	- Level threshold is now a standard wireless extension (version 4 !)
- *	- modules parameters types for kernel > 2.1.17
- *	- updated man page
- *	- Others cleanup from David Hinds
- *
- * Changes made for release in 2.9.5 :
- * ---------------------------------
- *	- byte count stats (courtesy of David Hinds)
- *	- Remove dev_tint stuff (courtesy of David Hinds)
- *	- Others cleanup from David Hinds
- *	- Encryption setting from Brent Elphick (thanks a lot !)
- *	- 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
- *
- * Changes made for release in 2.9.6 :
- * ---------------------------------
- *	- fix bug : no longuer disable watchdog in case of bogus interrupt
- *	- increase timeout in config code for picky hardware
- *	- mask unused bits in status (Wireless Extensions)
- *
- * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
- * -----------------------------------------------------------------
- *	- Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
- *	- PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
- *	- Better initialisation of the i82593 controller
- *	  from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
- *
- * Changes made for release in 3.0.10 :
- * ----------------------------------
- *	- Fix eject "hang" of the driver under 2.2.X :
- *		o create wv_flush_stale_links()
- *		o Rename wavelan_release to wv_pcmcia_release & move up
- *		o move unregister_netdev to wavelan_detach()
- *		o wavelan_release() no longer call wavelan_detach()
- *		o Suppress "release" timer
- *		o Other cleanups & fixes
- *	- New MAC address in the probe
- *	- Reorg PSA_CRC code (endian neutral & cleaner)
- *	- Correct initialisation of the i82593 from Lucent manual
- *	- Put back the watchdog, with larger timeout
- *	- TRANSMIT_NO_CRC is a "normal" error, so recover from it
- *	  from Derrick J Brashear <shadow@dementia.org>
- *	- Better handling of TX and RX normal failure conditions
- *	- #ifdef out all the roaming code
- *	- Add ESSID & "AP current address" ioctl stubs
- *	- General cleanup of the code
- *
- * Changes made for release in 3.0.13 :
- * ----------------------------------
- *	- Re-enable compilation of roaming code by default, but with
- *	  do_roaming = 0
- *	- Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
- *	  at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
- *	- Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
- *
- * Changes made for release in 3.0.15 :
- * ----------------------------------
- *	- Change e-mail and web page addresses
- *	- Watchdog timer is now correctly expressed in HZ, not in jiffies
- *	- Add channel number to the list of frequencies in range
- *	- Add the (short) list of bit-rates in range
- *	- Developp a new sensitivity... (sens.value & sens.fixed)
- *
- * Changes made for release in 3.1.2 :
- * ---------------------------------
- *	- Fix check for root permission (break instead of exit)
- *	- New nwid & encoding setting (Wireless Extension 9)
- *
- * Changes made for release in 3.1.12 :
- * ----------------------------------
- *	- reworked wv_82593_cmd to avoid using the IRQ handler and doing
- *	  ugly things with interrupts.
- *	- Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
- *	- Update to new network API (softnet - 2.3.43) :
- *		o replace dev->tbusy (David + me)
- *		o replace dev->tstart (David + me)
- *		o remove dev->interrupt (David)
- *		o add SMP locking via spinlock in splxx (me)
- *		o add spinlock in interrupt handler (me)
- *		o use kernel watchdog instead of ours (me)
- *		o verify that all the changes make sense and work (me)
- *	- Re-sync kernel/pcmcia versions (not much actually)
- *	- A few other cleanups (David & me)...
- *
- * Changes made for release in 3.1.22 :
- * ----------------------------------
- *	- Check that SMP works, remove annoying log message
- *
- * Changes made for release in 3.1.24 :
- * ----------------------------------
- *	- Fix unfrequent card lockup when watchdog was reseting the hardware :
- *		o control first busy loop in wv_82593_cmd()
- *		o Extend spinlock protection in wv_hw_config()
- *
- * Changes made for release in 3.1.33 :
- * ----------------------------------
- *	- Optional use new driver API for Wireless Extensions :
- *		o got rid of wavelan_ioctl()
- *		o use a bunch of iw_handler instead
- *
- * Changes made for release in 3.2.1 :
- * ---------------------------------
- *	- Set dev->trans_start to avoid filling the logs
- *		(and generating useless abort commands)
- *	- Avoid deadlocks in mmc_out()/mmc_in()
- *
- * Wishes & dreams:
- * ----------------
- *	- Cleanup and integrate the roaming code
- *	  (std debug, set DomainID, decay avg and co...)
- */
-
-/***************************** INCLUDES *****************************/
-
-/* Linux headers that we need */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>		/* Wireless extensions */
-#include <net/iw_handler.h>		/* New driver API */
-
-/* Pcmcia headers that we need */
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-/* Wavelan declarations */
-#include "i82593.h"	/* Definitions for the Intel chip */
-
-#include "wavelan_cs.h"	/* Others bits of the hardware */
-
-/************************** DRIVER OPTIONS **************************/
-/*
- * `#define' or `#undef' the following constant to change the behaviour
- * of the driver...
- */
-#define WAVELAN_ROAMING		/* Include experimental roaming code */
-#undef WAVELAN_ROAMING_EXT	/* Enable roaming wireless extensions */
-#undef SET_PSA_CRC		/* Set the CRC in PSA (slower) */
-#define USE_PSA_CONFIG		/* Use info from the PSA */
-#undef EEPROM_IS_PROTECTED	/* Doesn't seem to be necessary */
-#define MULTICAST_AVOID		/* Avoid extra multicast (I'm sceptical) */
-#undef SET_MAC_ADDRESS		/* Experimental */
-
-/* Warning : these stuff will slow down the driver... */
-#define WIRELESS_SPY		/* Enable spying addresses */
-#undef HISTOGRAM		/* Enable histogram of sig level... */
-
-/****************************** DEBUG ******************************/
-
-#undef DEBUG_MODULE_TRACE	/* Module insertion/removal */
-#undef DEBUG_CALLBACK_TRACE	/* Calls made by Linux */
-#undef DEBUG_INTERRUPT_TRACE	/* Calls to handler */
-#undef DEBUG_INTERRUPT_INFO	/* type of interrupt & so on */
-#define DEBUG_INTERRUPT_ERROR	/* problems */
-#undef DEBUG_CONFIG_TRACE	/* Trace the config functions */
-#undef DEBUG_CONFIG_INFO	/* What's going on... */
-#define DEBUG_CONFIG_ERRORS	/* Errors on configuration */
-#undef DEBUG_TX_TRACE		/* Transmission calls */
-#undef DEBUG_TX_INFO		/* Header of the transmitted packet */
-#undef DEBUG_TX_FAIL		/* Normal failure conditions */
-#define DEBUG_TX_ERROR		/* Unexpected conditions */
-#undef DEBUG_RX_TRACE		/* Transmission calls */
-#undef DEBUG_RX_INFO		/* Header of the transmitted packet */
-#undef DEBUG_RX_FAIL		/* Normal failure conditions */
-#define DEBUG_RX_ERROR		/* Unexpected conditions */
-#undef DEBUG_PACKET_DUMP	/* Dump packet on the screen */
-#undef DEBUG_IOCTL_TRACE	/* Misc call by Linux */
-#undef DEBUG_IOCTL_INFO		/* Various debug info */
-#define DEBUG_IOCTL_ERROR	/* What's going wrong */
-#define DEBUG_BASIC_SHOW	/* Show basic startup info */
-#undef DEBUG_VERSION_SHOW	/* Print version info */
-#undef DEBUG_PSA_SHOW		/* Dump psa to screen */
-#undef DEBUG_MMC_SHOW		/* Dump mmc to screen */
-#undef DEBUG_SHOW_UNUSED	/* Show also unused fields */
-#undef DEBUG_I82593_SHOW	/* Show i82593 status */
-#undef DEBUG_DEVICE_SHOW	/* Show device parameters */
-
-/************************ CONSTANTS & MACROS ************************/
-
-#ifdef DEBUG_VERSION_SHOW
-static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n";
-#endif
-
-/* Watchdog temporisation */
-#define	WATCHDOG_JIFFIES	(256*HZ/100)
-
-/* Fix a bug in some old wireless extension definitions */
-#ifndef IW_ESSID_MAX_SIZE
-#define IW_ESSID_MAX_SIZE	32
-#endif
-
-/* ------------------------ PRIVATE IOCTL ------------------------ */
-
-#define SIOCSIPQTHR	SIOCIWFIRSTPRIV		/* Set quality threshold */
-#define SIOCGIPQTHR	SIOCIWFIRSTPRIV + 1	/* Get quality threshold */
-#define SIOCSIPROAM     SIOCIWFIRSTPRIV + 2	/* Set roaming state */
-#define SIOCGIPROAM     SIOCIWFIRSTPRIV + 3	/* Get roaming state */
-
-#define SIOCSIPHISTO	SIOCIWFIRSTPRIV + 4	/* Set histogram ranges */
-#define SIOCGIPHISTO	SIOCIWFIRSTPRIV + 5	/* Get histogram values */
-
-/*************************** WaveLAN Roaming  **************************/
-#ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */
-
-#define WAVELAN_ROAMING_DEBUG	 0	/* 1 = Trace of handover decisions */
-					/* 2 = Info on each beacon rcvd... */
-#define MAX_WAVEPOINTS		7	/* Max visible at one time */
-#define WAVEPOINT_HISTORY	5	/* SNR sample history slow search */
-#define WAVEPOINT_FAST_HISTORY	2	/* SNR sample history fast search */
-#define SEARCH_THRESH_LOW	10	/* SNR to enter cell search */
-#define SEARCH_THRESH_HIGH	13	/* SNR to leave cell search */
-#define WAVELAN_ROAMING_DELTA	1	/* Hysteresis value (+/- SNR) */
-#define CELL_TIMEOUT		2*HZ	/* in jiffies */
-
-#define FAST_CELL_SEARCH	1	/* Boolean values... */
-#define NWID_PROMISC		1	/* for code clarity. */
-
-typedef struct wavepoint_beacon
-{
-  unsigned char		dsap,		/* Unused */
-			ssap,		/* Unused */
-			ctrl,		/* Unused */
-			O,U,I,		/* Unused */
-			spec_id1,	/* Unused */
-			spec_id2,	/* Unused */
-			pdu_type,	/* Unused */
-			seq;		/* WavePoint beacon sequence number */
-  __be16		domain_id,	/* WavePoint Domain ID */
-			nwid;		/* WavePoint NWID */
-} wavepoint_beacon;
-
-typedef struct wavepoint_history
-{
-  unsigned short	nwid;		/* WavePoint's NWID */
-  int			average_slow;	/* SNR running average */
-  int			average_fast;	/* SNR running average */
-  unsigned char	  sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
-  unsigned char		qualptr;	/* Index into ringbuffer */
-  unsigned char		last_seq;	/* Last seq. no seen for WavePoint */
-  struct wavepoint_history *next;	/* Next WavePoint in table */
-  struct wavepoint_history *prev;	/* Previous WavePoint in table */
-  unsigned long		last_seen;	/* Time of last beacon recvd, jiffies */
-} wavepoint_history;
-
-struct wavepoint_table
-{
-  wavepoint_history	*head;		/* Start of ringbuffer */
-  int			num_wavepoints;	/* No. of WavePoints visible */
-  unsigned char		locked;		/* Table lock */
-};
-
-#endif	/* WAVELAN_ROAMING */
-
-/****************************** TYPES ******************************/
-
-/* Shortcuts */
-typedef struct iw_statistics	iw_stats;
-typedef struct iw_quality	iw_qual;
-typedef struct iw_freq		iw_freq;
-typedef struct net_local	net_local;
-typedef struct timer_list	timer_list;
-
-/* Basic types */
-typedef u_char		mac_addr[WAVELAN_ADDR_SIZE];	/* Hardware address */
-
-/*
- * Static specific data for the interface.
- *
- * For each network interface, Linux keep data in two structure. "device"
- * keep the generic data (same format for everybody) and "net_local" keep
- * the additional specific data.
- */
-struct net_local
-{
-  dev_node_t 	node;		/* ???? What is this stuff ???? */
-  struct net_device *	dev;		/* Reverse link... */
-  spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
-  struct pcmcia_device *	link;		/* pcmcia structure */
-  int		nresets;	/* Number of hw resets */
-  u_char	configured;	/* If it is configured */
-  u_char	reconfig_82593;	/* Need to reconfigure the controller */
-  u_char	promiscuous;	/* Promiscuous mode */
-  u_char	allmulticast;	/* All Multicast mode */
-  int		mc_count;	/* Number of multicast addresses */
-
-  int   	stop;		/* Current i82593 Stop Hit Register */
-  int   	rfp;		/* Last DMA machine receive pointer */
-  int		overrunning;	/* Receiver overrun flag */
-
-  iw_stats	wstats;		/* Wireless specific stats */
-
-  struct iw_spy_data	spy_data;
-  struct iw_public_data	wireless_data;
-
-#ifdef HISTOGRAM
-  int		his_number;		/* Number of intervals */
-  u_char	his_range[16];		/* Boundaries of interval ]n-1; n] */
-  u_long	his_sum[16];		/* Sum in interval */
-#endif	/* HISTOGRAM */
-#ifdef WAVELAN_ROAMING
-  u_long	domain_id;	/* Domain ID we lock on for roaming */
-  int		filter_domains;	/* Check Domain ID of beacon found */
- struct wavepoint_table	wavepoint_table;	/* Table of visible WavePoints*/
-  wavepoint_history *	curr_point;		/* Current wavepoint */
-  int			cell_search;		/* Searching for new cell? */
-  struct timer_list	cell_timer;		/* Garbage collection */
-#endif	/* WAVELAN_ROAMING */
-  void __iomem *mem;
-};
-
-/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
-static inline u_char		/* data */
-	hasr_read(u_long);	/* Read the host interface : base address */
-static void
-	hacr_write(u_long,	/* Write to host interface : base address */
-		   u_char),	/* data */
-	hacr_write_slow(u_long,
-		   u_char);
-static void
-	psa_read(struct net_device *,	/* Read the Parameter Storage Area */
-		 int,		/* offset in PSA */
-		 u_char *,	/* buffer to fill */
-		 int),		/* size to read */
-	psa_write(struct net_device *,	/* Write to the PSA */
-		  int,		/* Offset in psa */
-		  u_char *,	/* Buffer in memory */
-		  int);		/* Length of buffer */
-static void
-	mmc_out(u_long,		/* Write 1 byte to the Modem Manag Control */
-		u_short,
-		u_char),
-	mmc_write(u_long,	/* Write n bytes to the MMC */
-		  u_char,
-		  u_char *,
-		  int);
-static u_char			/* Read 1 byte from the MMC */
-	mmc_in(u_long,
-	       u_short);
-static void
-	mmc_read(u_long,	/* Read n bytes from the MMC */
-		 u_char,
-		 u_char *,
-		 int),
-	fee_wait(u_long,	/* Wait for frequency EEprom : base address */
-		 int,		/* Base delay to wait for */
-		 int);		/* Number of time to wait */
-static void
-	fee_read(u_long,	/* Read the frequency EEprom : base address */
-		 u_short,	/* destination offset */
-		 u_short *,	/* data buffer */
-		 int);		/* number of registers */
-/* ---------------------- I82593 SUBROUTINES ----------------------- */
-static int
-	wv_82593_cmd(struct net_device *,	/* synchronously send a command to i82593 */ 
-		     char *,
-		     int,
-		     int);
-static inline int
-	wv_diag(struct net_device *);	/* Diagnostique the i82593 */
-static int
-	read_ringbuf(struct net_device *,	/* Read a receive buffer */
-		     int,
-		     char *,
-		     int);
-static void
-	wv_82593_reconfig(struct net_device *);	/* Reconfigure the controller */
-/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
-static void
-	wv_init_info(struct net_device *);	/* display startup info */
-/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
-static iw_stats *
-	wavelan_get_wireless_stats(struct net_device *);
-/* ----------------------- PACKET RECEPTION ----------------------- */
-static int
-	wv_start_of_frame(struct net_device *,	/* Seek beggining of current frame */
-			  int,	/* end of frame */
-			  int);	/* start of buffer */
-static void
-	wv_packet_read(struct net_device *,	/* Read a packet from a frame */
-		       int,
-		       int),
-	wv_packet_rcv(struct net_device *);	/* Read all packets waiting */
-/* --------------------- PACKET TRANSMISSION --------------------- */
-static void
-	wv_packet_write(struct net_device *,	/* Write a packet to the Tx buffer */
-			void *,
-			short);
-static netdev_tx_t
-	wavelan_packet_xmit(struct sk_buff *,	/* Send a packet */
-			    struct net_device *);
-/* -------------------- HARDWARE CONFIGURATION -------------------- */
-static int
-	wv_mmc_init(struct net_device *);	/* Initialize the modem */
-static int
-	wv_ru_stop(struct net_device *),	/* Stop the i82593 receiver unit */
-	wv_ru_start(struct net_device *);	/* Start the i82593 receiver unit */
-static int
-	wv_82593_config(struct net_device *);	/* Configure the i82593 */
-static int
-	wv_pcmcia_reset(struct net_device *);	/* Reset the pcmcia interface */
-static int
-	wv_hw_config(struct net_device *);	/* Reset & configure the whole hardware */
-static void
-	wv_hw_reset(struct net_device *);	/* Same, + start receiver unit */
-static int
-	wv_pcmcia_config(struct pcmcia_device *);	/* Configure the pcmcia interface */
-static void
-	wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */
-/* ---------------------- INTERRUPT HANDLING ---------------------- */
-static irqreturn_t
-	wavelan_interrupt(int,	/* Interrupt handler */
-			  void *);
-static void
-	wavelan_watchdog(struct net_device *);	/* Transmission watchdog */
-/* ------------------- CONFIGURATION CALLBACKS ------------------- */
-static int
-	wavelan_open(struct net_device *),		/* Open the device */
-	wavelan_close(struct net_device *);	/* Close the device */
-static void
-	wavelan_detach(struct pcmcia_device *p_dev);	/* Destroy a removed device */
-
-/**************************** VARIABLES ****************************/
-
-/*
- * Parameters that can be set with 'insmod'
- * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
- */
-
-/* Shared memory speed, in ns */
-static int	mem_speed = 0;
-
-/* New module interface */
-module_param(mem_speed, int, 0);
-
-#ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */
-/* Enable roaming mode ? No ! Please keep this to 0 */
-static int	do_roaming = 0;
-module_param(do_roaming, bool, 0);
-#endif	/* WAVELAN_ROAMING */
-
-MODULE_LICENSE("GPL");
-
-#endif	/* WAVELAN_CS_P_H */
-
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 88060e1..785e024 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -1,6 +1,6 @@
 menuconfig WL12XX
 	tristate "TI wl12xx driver support"
-	depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on MAC80211 && EXPERIMENTAL
 	---help---
 	  This will enable TI wl12xx driver support. The drivers make
 	  use of the mac80211 stack.
@@ -42,6 +42,7 @@
 config WL1271
 	tristate "TI wl1271 support"
 	depends on WL12XX && SPI_MASTER && GENERIC_HARDIRQS
+	depends on INET
 	select FW_LOADER
 	select CRC7
 	---help---
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 998e4b6..054533f 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -269,6 +269,7 @@
 
 	void (*set_power)(bool enable);
 	int irq;
+	bool use_eeprom;
 
 	enum wl1251_state state;
 	struct mutex mutex;
@@ -354,6 +355,8 @@
 	/* is firmware in elp mode */
 	bool elp;
 
+	struct delayed_work elp_work;
+
 	/* we can be in psm, but not in elp, we have to differentiate */
 	bool psm;
 
@@ -374,6 +377,8 @@
 	u8 buffer_busyword[WL1251_BUSY_WORD_LEN];
 	struct wl1251_rx_descriptor *rx_descriptor;
 
+	struct ieee80211_vif *vif;
+
 	u32 chip_id;
 	char fw_ver[21];
 };
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.c b/drivers/net/wireless/wl12xx/wl1251_acx.c
index 10b26c4..acfa086 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.c
@@ -494,7 +494,7 @@
 	return ret;
 }
 
-int wl1251_acx_beacon_filter_opt(struct wl1251 *wl)
+int wl1251_acx_beacon_filter_opt(struct wl1251 *wl, bool enable_filter)
 {
 	struct acx_beacon_filter_option *beacon_filter;
 	int ret;
@@ -507,7 +507,7 @@
 		goto out;
 	}
 
-	beacon_filter->enable = 0;
+	beacon_filter->enable = enable_filter;
 	beacon_filter->max_num_beacons = 0;
 
 	ret = wl1251_cmd_configure(wl, ACX_BEACON_FILTER_OPT,
@@ -525,6 +525,7 @@
 int wl1251_acx_beacon_filter_table(struct wl1251 *wl)
 {
 	struct acx_beacon_filter_ie_table *ie_table;
+	int idx = 0;
 	int ret;
 
 	wl1251_debug(DEBUG_ACX, "acx beacon filter table");
@@ -535,8 +536,10 @@
 		goto out;
 	}
 
-	ie_table->num_ie = 0;
-	memset(ie_table->table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+	/* configure default beacon pass-through rules */
+	ie_table->num_ie = 1;
+	ie_table->table[idx++] = BEACON_FILTER_IE_ID_CHANNEL_SWITCH_ANN;
+	ie_table->table[idx++] = BEACON_RULE_PASS_ON_APPEARANCE;
 
 	ret = wl1251_cmd_configure(wl, ACX_BEACON_FILTER_TABLE,
 				   ie_table, sizeof(*ie_table));
@@ -550,6 +553,35 @@
 	return ret;
 }
 
+int wl1251_acx_conn_monit_params(struct wl1251 *wl)
+{
+	struct acx_conn_monit_params *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx connection monitor parameters");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->synch_fail_thold = SYNCH_FAIL_DEFAULT_THRESHOLD;
+	acx->bss_lose_timeout = NO_BEACON_DEFAULT_TIMEOUT;
+
+	ret = wl1251_cmd_configure(wl, ACX_CONN_MONIT_PARAMS,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("failed to set connection monitor "
+			       "parameters: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
 int wl1251_acx_sg_enable(struct wl1251 *wl)
 {
 	struct acx_bt_wlan_coex *pta;
@@ -916,3 +948,31 @@
 	kfree(mem_conf);
 	return ret;
 }
+
+int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim)
+{
+	struct wl1251_acx_wr_tbtt_and_dtim *acx;
+	int ret;
+
+	wl1251_debug(DEBUG_ACX, "acx tbtt and dtim");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->tbtt = tbtt;
+	acx->dtim = dtim;
+
+	ret = wl1251_cmd_configure(wl, ACX_WR_TBTT_AND_DTIM,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1251_warning("failed to set tbtt and dtim: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1251_acx.h b/drivers/net/wireless/wl12xx/wl1251_acx.h
index cafb914..6523714 100644
--- a/drivers/net/wireless/wl12xx/wl1251_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1251_acx.h
@@ -450,6 +450,11 @@
 			   (BEACON_FILTER_TABLE_MAX_VENDOR_SPECIFIC_IE_NUM * \
 			    BEACON_FILTER_TABLE_EXTRA_VENDOR_SPECIFIC_IE_SIZE))
 
+#define BEACON_RULE_PASS_ON_CHANGE                     BIT(0)
+#define BEACON_RULE_PASS_ON_APPEARANCE                 BIT(1)
+
+#define BEACON_FILTER_IE_ID_CHANNEL_SWITCH_ANN         (37)
+
 struct acx_beacon_filter_ie_table {
 	struct acx_header header;
 
@@ -458,6 +463,16 @@
 	u8 pad[3];
 } __attribute__ ((packed));
 
+#define SYNCH_FAIL_DEFAULT_THRESHOLD    10     /* number of beacons */
+#define NO_BEACON_DEFAULT_TIMEOUT       (500) /* in microseconds */
+
+struct acx_conn_monit_params {
+	struct acx_header header;
+
+	u32 synch_fail_thold; /* number of beacons missed */
+	u32 bss_lose_timeout; /* number of TU's from synch fail */
+};
+
 enum {
 	SG_ENABLE = 0,
 	SG_DISABLE,
@@ -1134,6 +1149,23 @@
 	u32 num_rx_mem_blocks;
 } __attribute__ ((packed));
 
+
+struct wl1251_acx_wr_tbtt_and_dtim {
+
+	struct acx_header header;
+
+	/* Time in TUs between two consecutive beacons */
+	u16 tbtt;
+
+	/*
+	 * DTIM period
+	 * For BSS: Number of TBTTs in a DTIM period (range: 1-10)
+	 * For IBSS: value shall be set to 1
+	*/
+	u8  dtim;
+	u8  padding;
+} __attribute__ ((packed));
+
 /*************************************************************************
 
     Host Interrupt Register (WiLink -> Host)
@@ -1273,8 +1305,9 @@
 int wl1251_acx_group_address_tbl(struct wl1251 *wl);
 int wl1251_acx_service_period_timeout(struct wl1251 *wl);
 int wl1251_acx_rts_threshold(struct wl1251 *wl, u16 rts_threshold);
-int wl1251_acx_beacon_filter_opt(struct wl1251 *wl);
+int wl1251_acx_beacon_filter_opt(struct wl1251 *wl, bool enable_filter);
 int wl1251_acx_beacon_filter_table(struct wl1251 *wl);
+int wl1251_acx_conn_monit_params(struct wl1251 *wl);
 int wl1251_acx_sg_enable(struct wl1251 *wl);
 int wl1251_acx_sg_cfg(struct wl1251 *wl);
 int wl1251_acx_cca_threshold(struct wl1251 *wl);
@@ -1288,5 +1321,6 @@
 int wl1251_acx_tsf_info(struct wl1251 *wl, u64 *mactime);
 int wl1251_acx_rate_policies(struct wl1251 *wl);
 int wl1251_acx_mem_cfg(struct wl1251 *wl);
+int wl1251_acx_wr_tbtt_and_dtim(struct wl1251 *wl, u16 tbtt, u8 dtim);
 
 #endif /* __WL1251_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index 452d748..2e733e7 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -296,8 +296,12 @@
 		WL1251_ACX_INTR_INIT_COMPLETE;
 	wl1251_boot_target_enable_interrupts(wl);
 
-	/* unmask all mbox events  */
-	wl->event_mask = 0xffffffff;
+	wl->event_mask = SCAN_COMPLETE_EVENT_ID | BSS_LOSE_EVENT_ID |
+		SYNCHRONIZATION_TIMEOUT_EVENT_ID |
+		ROAMING_TRIGGER_LOW_RSSI_EVENT_ID |
+		ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID |
+		REGAINED_BSS_EVENT_ID | BT_PTA_SENSE_EVENT_ID |
+		BT_PTA_PREDICTION_EVENT_ID;
 
 	ret = wl1251_event_unmask(wl);
 	if (ret < 0) {
@@ -314,8 +318,8 @@
 static int wl1251_boot_upload_firmware(struct wl1251 *wl)
 {
 	int addr, chunk_num, partition_limit;
-	size_t fw_data_len;
-	u8 *p;
+	size_t fw_data_len, len;
+	u8 *p, *buf;
 
 	/* whal_FwCtrl_LoadFwImageSm() */
 
@@ -334,6 +338,12 @@
 		return -EIO;
 	}
 
+	buf = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!buf) {
+		wl1251_error("allocation for firmware upload chunk failed");
+		return -ENOMEM;
+	}
+
 	wl1251_set_partition(wl, WL1251_PART_DOWN_MEM_START,
 			     WL1251_PART_DOWN_MEM_SIZE,
 			     WL1251_PART_DOWN_REG_START,
@@ -364,7 +374,11 @@
 		p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
 		wl1251_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
 			     p, addr);
-		wl1251_mem_write(wl, addr, p, CHUNK_SIZE);
+
+		/* need to copy the chunk for dma */
+		len = CHUNK_SIZE;
+		memcpy(buf, p, len);
+		wl1251_mem_write(wl, addr, buf, len);
 
 		chunk_num++;
 	}
@@ -372,9 +386,16 @@
 	/* 10.4 upload the last chunk */
 	addr = WL1251_PART_DOWN_MEM_START + chunk_num * CHUNK_SIZE;
 	p = wl->fw + FW_HDR_SIZE + chunk_num * CHUNK_SIZE;
+
+	/* need to copy the chunk for dma */
+	len = fw_data_len % CHUNK_SIZE;
+	memcpy(buf, p, len);
+
 	wl1251_debug(DEBUG_BOOT, "uploading fw last chunk (%zu B) 0x%p to 0x%x",
-		     fw_data_len % CHUNK_SIZE, p, addr);
-	wl1251_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+		     len, p, addr);
+	wl1251_mem_write(wl, addr, buf, len);
+
+	kfree(buf);
 
 	return 0;
 }
@@ -473,13 +494,19 @@
 		goto out;
 
 	/* 2. start processing NVS file */
-	ret = wl1251_boot_upload_nvs(wl);
-	if (ret < 0)
-		goto out;
+	if (wl->use_eeprom) {
+		wl1251_reg_write32(wl, ACX_REG_EE_START, START_EEPROM_MGR);
+		msleep(4000);
+		wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, USE_EEPROM);
+	} else {
+		ret = wl1251_boot_upload_nvs(wl);
+		if (ret < 0)
+			goto out;
 
-	/* write firmware's last address (ie. it's length) to
-	 * ACX_EEPROMLESS_IND_REG */
-	wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+		/* write firmware's last address (ie. it's length) to
+		 * ACX_EEPROMLESS_IND_REG */
+		wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, wl->fw_len);
+	}
 
 	/* 6. read the EEPROM parameters */
 	tmp = wl1251_reg_read32(wl, SCR_PAD2);
diff --git a/drivers/net/wireless/wl12xx/wl1251_event.c b/drivers/net/wireless/wl12xx/wl1251_event.c
index 00076c4..020d764 100644
--- a/drivers/net/wireless/wl12xx/wl1251_event.c
+++ b/drivers/net/wireless/wl12xx/wl1251_event.c
@@ -79,6 +79,21 @@
 		}
 	}
 
+	if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID && wl->psm) {
+		wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
+
+		/* indicate to the stack, that beacons have been lost */
+		ieee80211_beacon_loss(wl->vif);
+	}
+
+	if (vector & REGAINED_BSS_EVENT_ID) {
+		if (wl->psm_requested) {
+			ret = wl1251_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/wl1251_init.c b/drivers/net/wireless/wl12xx/wl1251_init.c
index b2ee4f4..5cb5733 100644
--- a/drivers/net/wireless/wl12xx/wl1251_init.c
+++ b/drivers/net/wireless/wl12xx/wl1251_init.c
@@ -147,7 +147,8 @@
 {
 	int ret;
 
-	ret = wl1251_acx_beacon_filter_opt(wl);
+	/* disable beacon filtering at this stage */
+	ret = wl1251_acx_beacon_filter_opt(wl, false);
 	if (ret < 0)
 		return ret;
 
@@ -364,6 +365,11 @@
 	if (ret < 0)
 		goto out_free_data_path;
 
+	/* Initialize connection monitoring thresholds */
+	ret = wl1251_acx_conn_monit_params(wl);
+	if (ret < 0)
+		goto out_free_data_path;
+
 	/* Beacon filtering */
 	ret = wl1251_hw_init_beacon_filter(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 1103256..ff4be7b 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -28,6 +28,7 @@
 #include <linux/irq.h>
 #include <linux/crc32.h>
 #include <linux/etherdevice.h>
+#include <linux/vmalloc.h>
 
 #include "wl1251.h"
 #include "wl12xx_80211.h"
@@ -83,7 +84,7 @@
 	}
 
 	wl->fw_len = fw->size;
-	wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+	wl->fw = vmalloc(wl->fw_len);
 
 	if (!wl->fw) {
 		wl1251_error("could not allocate memory for the firmware");
@@ -183,8 +184,11 @@
 		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
 			     wl->chip_id);
 		break;
-	case CHIP_ID_1251_PG10:
 	case CHIP_ID_1251_PG11:
+		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
+			     wl->chip_id);
+		break;
+	case CHIP_ID_1251_PG10:
 	default:
 		wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
 		ret = -ENODEV;
@@ -208,9 +212,10 @@
 	return ret;
 }
 
+#define WL1251_IRQ_LOOP_COUNT 10
 static void wl1251_irq_work(struct work_struct *work)
 {
-	u32 intr;
+	u32 intr, ctr = WL1251_IRQ_LOOP_COUNT;
 	struct wl1251 *wl =
 		container_of(work, struct wl1251, irq_work);
 	int ret;
@@ -231,78 +236,86 @@
 	intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
 	wl1251_debug(DEBUG_IRQ, "intr: 0x%x", intr);
 
-	if (wl->data_path) {
-		wl->rx_counter =
-			wl1251_mem_read32(wl, wl->data_path->rx_control_addr);
+	do {
+		if (wl->data_path) {
+			wl->rx_counter = wl1251_mem_read32(
+				wl, wl->data_path->rx_control_addr);
 
-		/* We handle a frmware bug here */
-		switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
-		case 0:
-			wl1251_debug(DEBUG_IRQ, "RX: FW and host in sync");
-			intr &= ~WL1251_ACX_INTR_RX0_DATA;
-			intr &= ~WL1251_ACX_INTR_RX1_DATA;
-			break;
-		case 1:
-			wl1251_debug(DEBUG_IRQ, "RX: FW +1");
-			intr |= WL1251_ACX_INTR_RX0_DATA;
-			intr &= ~WL1251_ACX_INTR_RX1_DATA;
-			break;
-		case 2:
-			wl1251_debug(DEBUG_IRQ, "RX: FW +2");
-			intr |= WL1251_ACX_INTR_RX0_DATA;
-			intr |= WL1251_ACX_INTR_RX1_DATA;
-			break;
-		default:
-			wl1251_warning("RX: FW and host out of sync: %d",
-				       wl->rx_counter - wl->rx_handled);
-			break;
+			/* We handle a frmware bug here */
+			switch ((wl->rx_counter - wl->rx_handled) & 0xf) {
+			case 0:
+				wl1251_debug(DEBUG_IRQ,
+					     "RX: FW and host in sync");
+				intr &= ~WL1251_ACX_INTR_RX0_DATA;
+				intr &= ~WL1251_ACX_INTR_RX1_DATA;
+				break;
+			case 1:
+				wl1251_debug(DEBUG_IRQ, "RX: FW +1");
+				intr |= WL1251_ACX_INTR_RX0_DATA;
+				intr &= ~WL1251_ACX_INTR_RX1_DATA;
+				break;
+			case 2:
+				wl1251_debug(DEBUG_IRQ, "RX: FW +2");
+				intr |= WL1251_ACX_INTR_RX0_DATA;
+				intr |= WL1251_ACX_INTR_RX1_DATA;
+				break;
+			default:
+				wl1251_warning(
+					"RX: FW and host out of sync: %d",
+					wl->rx_counter - wl->rx_handled);
+				break;
+			}
+
+			wl->rx_handled = wl->rx_counter;
+
+			wl1251_debug(DEBUG_IRQ, "RX counter: %d",
+				     wl->rx_counter);
 		}
 
-		wl->rx_handled = wl->rx_counter;
+		intr &= wl->intr_mask;
 
+		if (intr == 0) {
+			wl1251_debug(DEBUG_IRQ, "INTR is 0");
+			goto out_sleep;
+		}
 
-		wl1251_debug(DEBUG_IRQ, "RX counter: %d", wl->rx_counter);
-	}
+		if (intr & WL1251_ACX_INTR_RX0_DATA) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
+			wl1251_rx(wl);
+		}
 
-	intr &= wl->intr_mask;
+		if (intr & WL1251_ACX_INTR_RX1_DATA) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
+			wl1251_rx(wl);
+		}
 
-	if (intr == 0) {
-		wl1251_debug(DEBUG_IRQ, "INTR is 0");
-		wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
-				   ~(wl->intr_mask));
+		if (intr & WL1251_ACX_INTR_TX_RESULT) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
+			wl1251_tx_complete(wl);
+		}
 
-		goto out_sleep;
-	}
+		if (intr & (WL1251_ACX_INTR_EVENT_A |
+			    WL1251_ACX_INTR_EVENT_B)) {
+			wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)",
+				     intr);
+			if (intr & WL1251_ACX_INTR_EVENT_A)
+				wl1251_event_handle(wl, 0);
+			else
+				wl1251_event_handle(wl, 1);
+		}
 
-	if (intr & WL1251_ACX_INTR_RX0_DATA) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX0_DATA");
-		wl1251_rx(wl);
-	}
+		if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
+			wl1251_debug(DEBUG_IRQ,
+				     "WL1251_ACX_INTR_INIT_COMPLETE");
 
-	if (intr & WL1251_ACX_INTR_RX1_DATA) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_RX1_DATA");
-		wl1251_rx(wl);
-	}
+		if (--ctr == 0)
+			break;
 
-	if (intr & WL1251_ACX_INTR_TX_RESULT) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_TX_RESULT");
-		wl1251_tx_complete(wl);
-	}
-
-	if (intr & (WL1251_ACX_INTR_EVENT_A | WL1251_ACX_INTR_EVENT_B)) {
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_EVENT (0x%x)", intr);
-		if (intr & WL1251_ACX_INTR_EVENT_A)
-			wl1251_event_handle(wl, 0);
-		else
-			wl1251_event_handle(wl, 1);
-	}
-
-	if (intr & WL1251_ACX_INTR_INIT_COMPLETE)
-		wl1251_debug(DEBUG_IRQ, "WL1251_ACX_INTR_INIT_COMPLETE");
-
-	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
+		intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	} while (intr);
 
 out_sleep:
+	wl1251_reg_write32(wl, ACX_REG_INTERRUPT_MASK, ~(wl->intr_mask));
 	wl1251_ps_elp_sleep(wl);
 
 out:
@@ -506,6 +519,12 @@
 		     conf->type, conf->mac_addr);
 
 	mutex_lock(&wl->mutex);
+	if (wl->vif) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	wl->vif = conf->vif;
 
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
@@ -535,7 +554,12 @@
 static void wl1251_op_remove_interface(struct ieee80211_hw *hw,
 					 struct ieee80211_if_init_conf *conf)
 {
+	struct wl1251 *wl = hw->priv;
+
+	mutex_lock(&wl->mutex);
 	wl1251_debug(DEBUG_MAC80211, "mac80211 remove interface");
+	wl->vif = NULL;
+	mutex_unlock(&wl->mutex);
 }
 
 static int wl1251_build_null_data(struct wl1251 *wl)
@@ -552,7 +576,8 @@
 
 	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
 	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
-						IEEE80211_STYPE_NULLFUNC);
+						IEEE80211_STYPE_NULLFUNC |
+						IEEE80211_FCTL_TODS);
 
 	return wl1251_cmd_template_set(wl, CMD_NULL_DATA, &template,
 				       sizeof(template));
@@ -565,7 +590,10 @@
 
 	memcpy(template.bssid, wl->bssid, ETH_ALEN);
 	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
-	template.aid = aid;
+
+	/* aid in PS-Poll has its two MSBs each set to 1 */
+	template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid);
+
 	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
 
 	return wl1251_cmd_template_set(wl, CMD_PS_POLL, &template,
@@ -1087,8 +1115,8 @@
 			wl->beacon_int = bss_conf->beacon_int;
 			wl->dtim_period = bss_conf->dtim_period;
 
-			/* FIXME: call join */
-
+			ret = wl1251_acx_wr_tbtt_and_dtim(wl, wl->beacon_int,
+							  wl->dtim_period);
 			wl->aid = bss_conf->aid;
 
 			ret = wl1251_build_ps_poll(wl, wl->aid);
@@ -1308,7 +1336,9 @@
 	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM;
+		IEEE80211_HW_NOISE_DBM |
+		IEEE80211_HW_SUPPORTS_PS |
+		IEEE80211_HW_BEACON_FILTER;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	wl->hw->wiphy->max_scan_ssids = 1;
@@ -1351,6 +1381,7 @@
 	skb_queue_head_init(&wl->tx_queue);
 
 	INIT_WORK(&wl->filter_work, wl1251_filter_work);
+	INIT_DELAYED_WORK(&wl->elp_work, wl1251_elp_work);
 	wl->channel = WL1251_DEFAULT_CHANNEL;
 	wl->scanning = false;
 	wl->default_key = 0;
@@ -1368,6 +1399,7 @@
 	wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
 	wl->beacon_int = WL1251_DEFAULT_BEACON_INT;
 	wl->dtim_period = WL1251_DEFAULT_DTIM_PERIOD;
+	wl->vif = NULL;
 
 	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
 		wl->tx_frames[i] = NULL;
@@ -1409,7 +1441,7 @@
 
 	kfree(wl->target_mem_map);
 	kfree(wl->data_path);
-	kfree(wl->fw);
+	vfree(wl->fw);
 	wl->fw = NULL;
 	kfree(wl->nvs);
 	wl->nvs = NULL;
@@ -1426,4 +1458,5 @@
 MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
-MODULE_ALIAS("spi:wl12xx");
+MODULE_ALIAS("spi:wl1251");
+MODULE_FIRMWARE(WL1251_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/wl1251_netlink.h b/drivers/net/wireless/wl12xx/wl1251_netlink.h
deleted file mode 100644
index ee36695..0000000
--- a/drivers/net/wireless/wl12xx/wl1251_netlink.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * This file is part of wl1251
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL1251_NETLINK_H__
-#define __WL1251_NETLINK_H__
-
-int wl1251_nl_register(void);
-void wl1251_nl_unregister(void);
-
-#endif /* __WL1251_NETLINK_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.c b/drivers/net/wireless/wl12xx/wl1251_ps.c
index c53e287..9931b19 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.c
@@ -28,17 +28,41 @@
 
 #define WL1251_WAKEUP_TIMEOUT 2000
 
+void wl1251_elp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct wl1251 *wl;
+
+	dwork = container_of(work, struct delayed_work, work);
+	wl = container_of(dwork, struct wl1251, elp_work);
+
+	wl1251_debug(DEBUG_PSM, "elp work");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->elp || !wl->psm)
+		goto out;
+
+	wl1251_debug(DEBUG_PSM, "chip to elp");
+	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+	wl->elp = true;
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+#define ELP_ENTRY_DELAY  5
+
 /* Routines to toggle sleep mode while in ELP */
 void wl1251_ps_elp_sleep(struct wl1251 *wl)
 {
-	if (wl->elp || !wl->psm)
-		return;
+	unsigned long delay;
 
-	wl1251_debug(DEBUG_PSM, "chip to elp");
-
-	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
-
-	wl->elp = true;
+	if (wl->psm) {
+		cancel_delayed_work(&wl->elp_work);
+		delay = msecs_to_jiffies(ELP_ENTRY_DELAY);
+		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, delay);
+	}
 }
 
 int wl1251_ps_elp_wakeup(struct wl1251 *wl)
@@ -119,6 +143,11 @@
 	case STATION_POWER_SAVE_MODE:
 		wl1251_debug(DEBUG_PSM, "entering psm");
 
+		/* enable beacon filtering */
+		ret = wl1251_acx_beacon_filter_opt(wl, true);
+		if (ret < 0)
+			return ret;
+
 		ret = wl1251_acx_wake_up_conditions(wl,
 						    WAKE_UP_EVENT_DTIM_BITMAP,
 						    wl->listen_int);
@@ -142,6 +171,11 @@
 		if (ret < 0)
 			return ret;
 
+		/* disable beacon filtering */
+		ret = wl1251_acx_beacon_filter_opt(wl, false);
+		if (ret < 0)
+			return ret;
+
 		ret = wl1251_acx_wake_up_conditions(wl,
 						    WAKE_UP_EVENT_DTIM_BITMAP,
 						    wl->listen_int);
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.h b/drivers/net/wireless/wl12xx/wl1251_ps.h
index db036fe..c688ac5 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.h
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.h
@@ -31,6 +31,7 @@
 int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode);
 void wl1251_ps_elp_sleep(struct wl1251 *wl);
 int wl1251_ps_elp_wakeup(struct wl1251 *wl);
+void wl1251_elp_work(struct work_struct *work);
 
 
 #endif /* __WL1251_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_reg.h b/drivers/net/wireless/wl12xx/wl1251_reg.h
index 06e1bd9..0ca3b43 100644
--- a/drivers/net/wireless/wl12xx/wl1251_reg.h
+++ b/drivers/net/wireless/wl12xx/wl1251_reg.h
@@ -370,6 +370,7 @@
  EEPROM location specified in the EE_ADDR register.
  The Wlan hardware hardware clears this bit automatically.
 *===============================================*/
+#define EE_CTL                              (REGISTERS_BASE + 0x2000)
 #define ACX_EE_CTL_REG                      EE_CTL
 #define EE_WRITE                            0x00000001ul
 #define EE_READ                             0x00000002ul
@@ -380,6 +381,7 @@
   This register specifies the address
   within the EEPROM from/to which to read/write data.
   ===============================================*/
+#define EE_ADDR                             (REGISTERS_BASE + 0x2008)
 #define ACX_EE_ADDR_REG                     EE_ADDR
 
 /*===============================================
@@ -389,8 +391,12 @@
   data from the EEPROM or the write data
   to be written to the EEPROM.
   ===============================================*/
+#define EE_DATA                             (REGISTERS_BASE + 0x2004)
 #define ACX_EE_DATA_REG                     EE_DATA
 
+#define EEPROM_ACCESS_TO                    10000   /* timeout counter */
+#define START_EEPROM_MGR                    0x00000001
+
 /*===============================================
   EEPROM Base Address  - 32bit RW
   ------------------------------------------
diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.c b/drivers/net/wireless/wl12xx/wl1251_rx.c
index 17c54b5..f84cc89 100644
--- a/drivers/net/wireless/wl12xx/wl1251_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_rx.c
@@ -72,10 +72,6 @@
 	}
 
 	status->signal = desc->rssi;
-	status->qual = (desc->rssi - WL1251_RX_MIN_RSSI) * 100 /
-		(WL1251_RX_MAX_RSSI - WL1251_RX_MIN_RSSI);
-	status->qual = min(status->qual, 100);
-	status->qual = max(status->qual, 0);
 
 	/*
 	 * FIXME: guessing that snr needs to be divided by two, otherwise
@@ -153,7 +149,7 @@
 		     beacon ? "beacon" : "");
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
-	ieee80211_rx(wl->hw, skb);
+	ieee80211_rx_ni(wl->hw, skb);
 }
 
 static void wl1251_rx_ack(struct wl1251 *wl)
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
index 14eff2b..9cc8c32 100644
--- a/drivers/net/wireless/wl12xx/wl1251_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -270,6 +270,8 @@
 		return -ENODEV;
 	}
 
+	wl->use_eeprom = pdata->use_eeprom;
+
 	ret = request_irq(wl->irq, wl1251_irq, 0, DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1251_error("request_irq() failed: %d", ret);
@@ -307,7 +309,7 @@
 
 static struct spi_driver wl1251_spi_driver = {
 	.driver = {
-		.name		= "wl12xx",
+		.name		= "wl1251",
 		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 	},
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 55818f9..94359b1 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -32,6 +32,8 @@
 #include <linux/bitops.h>
 #include <net/mac80211.h>
 
+#include "wl1271_conf.h"
+
 #define DRIVER_NAME "wl1271"
 #define DRIVER_PREFIX DRIVER_NAME ": "
 
@@ -97,21 +99,42 @@
 	} while (0)
 
 #define WL1271_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN |	\
-				  CFG_BSSID_FILTER_EN)
+				  CFG_BSSID_FILTER_EN | \
+				  CFG_MC_FILTER_EN)
 
 #define WL1271_DEFAULT_RX_FILTER (CFG_RX_RCTS_ACK | CFG_RX_PRSP_EN |  \
 				  CFG_RX_MGMT_EN | CFG_RX_DATA_EN |   \
 				  CFG_RX_CTL_EN | CFG_RX_BCN_EN |     \
 				  CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
 
+#define WL1271_DEFAULT_BASIC_RATE_SET (CONF_TX_RATE_MASK_ALL)
+
 #define WL1271_FW_NAME "wl1271-fw.bin"
 #define WL1271_NVS_NAME "wl1271-nvs.bin"
 
-#define WL1271_BUSY_WORD_LEN 8
+/*
+ * Enable/disable 802.11a support for WL1273
+ */
+#undef WL1271_80211A_ENABLED
+
+/*
+ * FIXME: for the wl1271, a busy word count of 1 here will result in a more
+ * optimal SPI interface. There is some SPI bug however, causing RXS time outs
+ * with this mode occasionally on boot, so lets have three for now. A value of
+ * three should make sure, that the chipset will always be ready, though this
+ * will impact throughput and latencies slightly.
+ */
+#define WL1271_BUSY_WORD_CNT 3
+#define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32))
 
 #define WL1271_ELP_HW_STATE_ASLEEP 0
 #define WL1271_ELP_HW_STATE_IRQ    1
 
+#define WL1271_DEFAULT_BEACON_INT  100
+#define WL1271_DEFAULT_DTIM_PERIOD 1
+
+#define ACX_TX_DESCRIPTORS         32
+
 enum wl1271_state {
 	WL1271_STATE_OFF,
 	WL1271_STATE_ON,
@@ -134,6 +157,8 @@
 struct wl1271_partition_set {
 	struct wl1271_partition mem;
 	struct wl1271_partition reg;
+	struct wl1271_partition mem2;
+	struct wl1271_partition mem3;
 };
 
 struct wl1271;
@@ -258,15 +283,15 @@
 
 /* FW status registers */
 struct wl1271_fw_status {
-	u32 intr;
+	__le32 intr;
 	u8  fw_rx_counter;
 	u8  drv_rx_counter;
 	u8  reserved;
 	u8  tx_results_counter;
-	u32 rx_pkt_descs[NUM_RX_PKT_DESC];
-	u32 tx_released_blks[NUM_TX_QUEUES];
-	u32 fw_localtime;
-	u32 padding[2];
+	__le32 rx_pkt_descs[NUM_RX_PKT_DESC];
+	__le32 tx_released_blks[NUM_TX_QUEUES];
+	__le32 fw_localtime;
+	__le32 padding[2];
 } __attribute__ ((packed));
 
 struct wl1271_rx_mem_pool_addr {
@@ -274,6 +299,15 @@
 	u32 addr_extra;
 };
 
+struct wl1271_scan {
+	u8 state;
+	u8 ssid[IW_ESSID_MAX_SIZE+1];
+	size_t ssid_len;
+	u8 active;
+	u8 high_prio;
+	u8 probe_requests;
+};
+
 struct wl1271 {
 	struct ieee80211_hw *hw;
 	bool mac80211_registered;
@@ -288,10 +322,7 @@
 	enum wl1271_state state;
 	struct mutex mutex;
 
-	int physical_mem_addr;
-	int physical_reg_addr;
-	int virtual_mem_addr;
-	int virtual_reg_addr;
+	struct wl1271_partition_set part;
 
 	struct wl1271_chip chip;
 
@@ -308,7 +339,6 @@
 	u8 bss_type;
 	u8 ssid[IW_ESSID_MAX_SIZE + 1];
 	u8 ssid_len;
-	u8 listen_int;
 	int channel;
 
 	struct wl1271_acx_mem_map *target_mem_map;
@@ -332,10 +362,14 @@
 	bool tx_queue_stopped;
 
 	struct work_struct tx_work;
-	struct work_struct filter_work;
 
 	/* Pending TX frames */
-	struct sk_buff *tx_frames[16];
+	struct sk_buff *tx_frames[ACX_TX_DESCRIPTORS];
+
+	/* Security sequence number counters */
+	u8 tx_security_last_seq;
+	u16 tx_security_seq_16;
+	u32 tx_security_seq_32;
 
 	/* FW Rx counter */
 	u32 rx_counter;
@@ -354,10 +388,17 @@
 
 	/* Are we currently scanning */
 	bool scanning;
+	struct wl1271_scan scan;
 
 	/* Our association ID */
 	u16 aid;
 
+	/* currently configured rate set */
+	u32 basic_rate_set;
+
+	/* The current band */
+	enum ieee80211_band band;
+
 	/* Default key (for WEP) */
 	u32 default_key;
 
@@ -368,6 +409,7 @@
 	bool elp;
 
 	struct completion *elp_compl;
+	struct delayed_work elp_work;
 
 	/* we can be in psm, but not in elp, we have to differentiate */
 	bool psm;
@@ -375,6 +417,9 @@
 	/* PSM mode requested */
 	bool psm_requested;
 
+	/* retry counter for PSM entries */
+	u8 psm_entry_retry;
+
 	/* in dBm */
 	int power_level;
 
@@ -383,11 +428,20 @@
 
 	u32 buffer_32;
 	u32 buffer_cmd;
-	u8 buffer_busyword[WL1271_BUSY_WORD_LEN];
-	struct wl1271_rx_descriptor *rx_descriptor;
+	u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
 
 	struct wl1271_fw_status *fw_status;
 	struct wl1271_tx_hw_res_if *tx_res_if;
+
+	struct ieee80211_vif *vif;
+
+	/* Used for a workaround to send disconnect before rejoining */
+	bool joined;
+
+	/* Current chipset configuration */
+	struct conf_drv_settings conf;
+
+	struct list_head list;
 };
 
 int wl1271_plt_start(struct wl1271 *wl);
@@ -404,4 +458,13 @@
 /* WL1271 needs a 200ms sleep after power on */
 #define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
 
+static inline bool wl1271_11a_enabled(void)
+{
+#ifdef WL1271_80211A_ENABLED
+	return true;
+#else
+	return false;
+#endif
+}
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index f622a40..5cc89bb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -34,8 +34,7 @@
 #include "wl1271_spi.h"
 #include "wl1271_ps.h"
 
-int wl1271_acx_wake_up_conditions(struct wl1271 *wl, u8 wake_up_event,
-				  u8 listen_interval)
+int wl1271_acx_wake_up_conditions(struct wl1271 *wl)
 {
 	struct acx_wake_up_condition *wake_up;
 	int ret;
@@ -48,8 +47,8 @@
 		goto out;
 	}
 
-	wake_up->wake_up_event = wake_up_event;
-	wake_up->listen_interval = listen_interval;
+	wake_up->wake_up_event = wl->conf.conn.wake_up_event;
+	wake_up->listen_interval = wl->conf.conn.listen_interval;
 
 	ret = wl1271_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS,
 				   wake_up, sizeof(*wake_up));
@@ -137,7 +136,12 @@
 		goto out;
 	}
 
-	acx->current_tx_power = power * 10;
+	/*
+	 * FIXME: This is a workaround needed while we don't the correct
+	 * calibration, to avoid distortions
+	 */
+	/* acx->current_tx_power = power * 10; */
+	acx->current_tx_power = 120;
 
 	ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
 	if (ret < 0) {
@@ -193,7 +197,7 @@
 	return 0;
 }
 
-int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl, u32 life_time)
+int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl)
 {
 	struct acx_rx_msdu_lifetime *acx;
 	int ret;
@@ -206,7 +210,7 @@
 		goto out;
 	}
 
-	acx->lifetime = life_time;
+	acx->lifetime = cpu_to_le32(wl->conf.rx.rx_msdu_life_time);
 	ret = wl1271_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME,
 				   acx, sizeof(*acx));
 	if (ret < 0) {
@@ -232,8 +236,8 @@
 		goto out;
 	}
 
-	rx_config->config_options = config;
-	rx_config->filter_options = filter;
+	rx_config->config_options = cpu_to_le32(config);
+	rx_config->filter_options = cpu_to_le32(filter);
 
 	ret = wl1271_cmd_configure(wl, ACX_RX_CFG,
 				   rx_config, sizeof(*rx_config));
@@ -260,7 +264,7 @@
 		goto out;
 	}
 
-	/* FIXME: threshold value not set */
+	pd->threshold = cpu_to_le32(wl->conf.rx.packet_detection_threshold);
 
 	ret = wl1271_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd));
 	if (ret < 0) {
@@ -300,7 +304,8 @@
 	return ret;
 }
 
-int wl1271_acx_group_address_tbl(struct wl1271 *wl)
+int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
+				 void *mc_list, u32 mc_list_len)
 {
 	struct acx_dot11_grp_addr_tbl *acx;
 	int ret;
@@ -314,9 +319,9 @@
 	}
 
 	/* MAC filtering */
-	acx->enabled = 0;
-	acx->num_groups = 0;
-	memset(acx->mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+	acx->enabled = enable;
+	acx->num_groups = mc_list_len;
+	memcpy(acx->mac_table, mc_list, mc_list_len * ETH_ALEN);
 
 	ret = wl1271_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL,
 				   acx, sizeof(*acx));
@@ -343,8 +348,8 @@
 
 	wl1271_debug(DEBUG_ACX, "acx service period timeout");
 
-	rx_timeout->ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
-	rx_timeout->upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+	rx_timeout->ps_poll_timeout = cpu_to_le16(wl->conf.rx.ps_poll_timeout);
+	rx_timeout->upsd_timeout = cpu_to_le16(wl->conf.rx.upsd_timeout);
 
 	ret = wl1271_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT,
 				   rx_timeout, sizeof(*rx_timeout));
@@ -372,7 +377,7 @@
 		goto out;
 	}
 
-	rts->threshold = rts_threshold;
+	rts->threshold = cpu_to_le16(rts_threshold);
 
 	ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
 	if (ret < 0) {
@@ -385,20 +390,29 @@
 	return ret;
 }
 
-int wl1271_acx_beacon_filter_opt(struct wl1271 *wl)
+int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter)
 {
-	struct acx_beacon_filter_option *beacon_filter;
-	int ret;
+	struct acx_beacon_filter_option *beacon_filter = NULL;
+	int ret = 0;
 
 	wl1271_debug(DEBUG_ACX, "acx beacon filter opt");
 
+	if (enable_filter &&
+	    wl->conf.conn.bcn_filt_mode == CONF_BCN_FILT_MODE_DISABLED)
+		goto out;
+
 	beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL);
 	if (!beacon_filter) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	beacon_filter->enable = 0;
+	beacon_filter->enable = enable_filter;
+
+	/*
+	 * When set to zero, and the filter is enabled, beacons
+	 * without the unicast TIM bit set are dropped.
+	 */
 	beacon_filter->max_num_beacons = 0;
 
 	ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_OPT,
@@ -416,7 +430,9 @@
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl)
 {
 	struct acx_beacon_filter_ie_table *ie_table;
+	int i, idx = 0;
 	int ret;
+	bool vendor_spec = false;
 
 	wl1271_debug(DEBUG_ACX, "acx beacon filter table");
 
@@ -426,8 +442,32 @@
 		goto out;
 	}
 
+	/* configure default beacon pass-through rules */
 	ie_table->num_ie = 0;
-	memset(ie_table->table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+	for (i = 0; i < wl->conf.conn.bcn_filt_ie_count; i++) {
+		struct conf_bcn_filt_rule *r = &(wl->conf.conn.bcn_filt_ie[i]);
+		ie_table->table[idx++] = r->ie;
+		ie_table->table[idx++] = r->rule;
+
+		if (r->ie == WLAN_EID_VENDOR_SPECIFIC) {
+			/* only one vendor specific ie allowed */
+			if (vendor_spec)
+				continue;
+
+			/* for vendor specific rules configure the
+			   additional fields */
+			memcpy(&(ie_table->table[idx]), r->oui,
+			       CONF_BCN_IE_OUI_LEN);
+			idx += CONF_BCN_IE_OUI_LEN;
+			ie_table->table[idx++] = r->type;
+			memcpy(&(ie_table->table[idx]), r->version,
+			       CONF_BCN_IE_VER_LEN);
+			idx += CONF_BCN_IE_VER_LEN;
+			vendor_spec = true;
+		}
+
+		ie_table->num_ie++;
+	}
 
 	ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_TABLE,
 				   ie_table, sizeof(*ie_table));
@@ -441,6 +481,36 @@
 	return ret;
 }
 
+int wl1271_acx_conn_monit_params(struct wl1271 *wl)
+{
+	struct acx_conn_monit_params *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx connection monitor parameters");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->synch_fail_thold = cpu_to_le32(wl->conf.conn.synch_fail_thold);
+	acx->bss_lose_timeout = cpu_to_le32(wl->conf.conn.bss_lose_timeout);
+
+	ret = wl1271_cmd_configure(wl, ACX_CONN_MONIT_PARAMS,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("failed to set connection monitor "
+			       "parameters: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+
 int wl1271_acx_sg_enable(struct wl1271 *wl)
 {
 	struct acx_bt_wlan_coex *pta;
@@ -470,6 +540,7 @@
 int wl1271_acx_sg_cfg(struct wl1271 *wl)
 {
 	struct acx_bt_wlan_coex_param *param;
+	struct conf_sg_settings *c = &wl->conf.sg;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "acx sg cfg");
@@ -481,34 +552,19 @@
 	}
 
 	/* BT-WLAN coext parameters */
-	param->min_rate = RATE_INDEX_24MBPS;
-	param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
-	param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
-	param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
-	param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
-	param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
-	param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
-	param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
-	param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
-	param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
-	param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
-	param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
-	param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
-	param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
-	param->antenna_type = PTA_ANTENNA_TYPE_DEF;
-	param->signal_type = PTA_SIGNALING_TYPE_DEF;
-	param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
-	param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
-	param->max_cts = PTA_MAX_NUM_CTS_DEF;
-	param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
-	param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
-	param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
-	param->wlan_elp_hp = PTA_ELP_HP_DEF;
-	param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
-	param->ack_mode_dual_ant = PTA_ACK_MODE_DEF;
-	param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
-	param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
-	param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+	param->per_threshold = cpu_to_le32(c->per_threshold);
+	param->max_scan_compensation_time =
+		cpu_to_le32(c->max_scan_compensation_time);
+	param->nfs_sample_interval = cpu_to_le16(c->nfs_sample_interval);
+	param->load_ratio = c->load_ratio;
+	param->auto_ps_mode = c->auto_ps_mode;
+	param->probe_req_compensation = c->probe_req_compensation;
+	param->scan_window_compensation = c->scan_window_compensation;
+	param->antenna_config = c->antenna_config;
+	param->beacon_miss_threshold = c->beacon_miss_threshold;
+	param->rate_adaptation_threshold =
+		cpu_to_le32(c->rate_adaptation_threshold);
+	param->rate_adaptation_snr = c->rate_adaptation_snr;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
@@ -534,8 +590,8 @@
 		goto out;
 	}
 
-	detection->rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
-	detection->tx_energy_detection = 0;
+	detection->rx_cca_threshold = cpu_to_le16(wl->conf.rx.rx_cca_threshold);
+	detection->tx_energy_detection = wl->conf.tx.tx_energy_detection;
 
 	ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD,
 				   detection, sizeof(*detection));
@@ -562,10 +618,10 @@
 		goto out;
 	}
 
-	bb->beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
-	bb->broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
-	bb->rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
-	bb->ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+	bb->beacon_rx_timeout = cpu_to_le16(wl->conf.conn.beacon_rx_timeout);
+	bb->broadcast_timeout = cpu_to_le16(wl->conf.conn.broadcast_timeout);
+	bb->rx_broadcast_in_ps = wl->conf.conn.rx_broadcast_in_ps;
+	bb->ps_poll_threshold = wl->conf.conn.ps_poll_threshold;
 
 	ret = wl1271_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb));
 	if (ret < 0) {
@@ -591,7 +647,7 @@
 		goto out;
 	}
 
-	acx_aid->aid = aid;
+	acx_aid->aid = cpu_to_le16(aid);
 
 	ret = wl1271_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid));
 	if (ret < 0) {
@@ -618,9 +674,8 @@
 	}
 
 	/* high event mask is unused */
-	mask->high_event_mask = 0xffffffff;
-
-	mask->event_mask = event_mask;
+	mask->high_event_mask = cpu_to_le32(0xffffffff);
+	mask->event_mask = cpu_to_le32(event_mask);
 
 	ret = wl1271_cmd_configure(wl, ACX_EVENT_MBOX_MASK,
 				   mask, sizeof(*mask));
@@ -703,9 +758,10 @@
 	return 0;
 }
 
-int wl1271_acx_rate_policies(struct wl1271 *wl)
+int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates)
 {
 	struct acx_rate_policy *acx;
+	struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf;
 	int ret = 0;
 
 	wl1271_debug(DEBUG_ACX, "acx rate policies");
@@ -718,11 +774,11 @@
 	}
 
 	/* configure one default (one-size-fits-all) rate class */
-	acx->rate_class_cnt = 1;
-	acx->rate_class[0].enabled_rates = ACX_RATE_MASK_ALL;
-	acx->rate_class[0].short_retry_limit = ACX_RATE_RETRY_LIMIT;
-	acx->rate_class[0].long_retry_limit = ACX_RATE_RETRY_LIMIT;
-	acx->rate_class[0].aflags = 0;
+	acx->rate_class_cnt = cpu_to_le32(1);
+	acx->rate_class[0].enabled_rates = cpu_to_le32(enabled_rates);
+	acx->rate_class[0].short_retry_limit = c->short_retry_limit;
+	acx->rate_class[0].long_retry_limit = c->long_retry_limit;
+	acx->rate_class[0].aflags = c->aflags;
 
 	ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
 	if (ret < 0) {
@@ -749,22 +805,14 @@
 		goto out;
 	}
 
-	/*
-	 * FIXME: Configure each AC with appropriate values (most suitable
-	 * values will probably be different for each AC.
-	 */
-	for (i = 0; i < WL1271_ACX_AC_COUNT; i++) {
-		acx->ac = i;
-
-		/*
-		 * FIXME: The following default values originate from
-		 * the TI reference driver. What do they mean?
-		 */
-		acx->cw_min = 15;
-		acx->cw_max = 63;
-		acx->aifsn = 3;
+	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+		struct conf_tx_ac_category *c = &(wl->conf.tx.ac_conf[i]);
+		acx->ac = c->ac;
+		acx->cw_min = c->cw_min;
+		acx->cw_max = cpu_to_le16(c->cw_max);
+		acx->aifsn = c->aifsn;
 		acx->reserved = 0;
-		acx->tx_op_limit = 0;
+		acx->tx_op_limit = cpu_to_le16(c->tx_op_limit);
 
 		ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
 		if (ret < 0) {
@@ -793,12 +841,15 @@
 		goto out;
 	}
 
-	/* FIXME: configure each TID with a different AC reference */
-	for (i = 0; i < WL1271_ACX_TID_COUNT; i++) {
-		acx->queue_id = i;
-		acx->tsid = WL1271_ACX_AC_BE;
-		acx->ps_scheme = WL1271_ACX_PS_SCHEME_LEGACY;
-		acx->ack_policy = WL1271_ACX_ACK_POLICY_LEGACY;
+	for (i = 0; i < wl->conf.tx.tid_conf_count; i++) {
+		struct conf_tx_tid *c = &(wl->conf.tx.tid_conf[i]);
+		acx->queue_id = c->queue_id;
+		acx->channel_type = c->channel_type;
+		acx->tsid = c->tsid;
+		acx->ps_scheme = c->ps_scheme;
+		acx->ack_policy = c->ack_policy;
+		acx->apsd_conf[0] = cpu_to_le32(c->apsd_conf[0]);
+		acx->apsd_conf[1] = cpu_to_le32(c->apsd_conf[1]);
 
 		ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
 		if (ret < 0) {
@@ -826,7 +877,7 @@
 		goto out;
 	}
 
-	acx->frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+	acx->frag_threshold = cpu_to_le16(wl->conf.tx.frag_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of frag threshold failed: %d", ret);
@@ -852,8 +903,8 @@
 		goto out;
 	}
 
-	acx->tx_compl_timeout = WL1271_ACX_TX_COMPL_TIMEOUT;
-	acx->tx_compl_threshold = WL1271_ACX_TX_COMPL_THRESHOLD;
+	acx->tx_compl_timeout = cpu_to_le16(wl->conf.tx.tx_compl_timeout);
+	acx->tx_compl_threshold = cpu_to_le16(wl->conf.tx.tx_compl_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_TX_CONFIG_OPT, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of tx options failed: %d", ret);
@@ -879,11 +930,11 @@
 	}
 
 	/* memory config */
-	mem_conf->num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+	mem_conf->num_stations = DEFAULT_NUM_STATIONS;
 	mem_conf->rx_mem_block_num = ACX_RX_MEM_BLOCKS;
 	mem_conf->tx_min_mem_block_num = ACX_TX_MIN_MEM_BLOCKS;
 	mem_conf->num_ssid_profiles = ACX_NUM_SSID_PROFILES;
-	mem_conf->total_tx_descriptors = ACX_TX_DESCRIPTORS;
+	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
 				   sizeof(*mem_conf));
@@ -906,7 +957,7 @@
 		return ret;
 
 	wl->target_mem_map = kzalloc(sizeof(struct wl1271_acx_mem_map),
-					  GFP_KERNEL);
+				     GFP_KERNEL);
 	if (!wl->target_mem_map) {
 		wl1271_error("couldn't allocate target memory map");
 		return -ENOMEM;
@@ -923,7 +974,8 @@
 	}
 
 	/* initialize TX block book keeping */
-	wl->tx_blocks_available = wl->target_mem_map->num_tx_mem_blocks;
+	wl->tx_blocks_available =
+		le32_to_cpu(wl->target_mem_map->num_tx_mem_blocks);
 	wl1271_debug(DEBUG_TX, "available tx blocks: %d",
 		     wl->tx_blocks_available);
 
@@ -943,10 +995,10 @@
 		goto out;
 	}
 
-	rx_conf->threshold = WL1271_RX_INTR_THRESHOLD_DEF;
-	rx_conf->timeout = WL1271_RX_INTR_TIMEOUT_DEF;
-	rx_conf->mblk_threshold = USHORT_MAX; /* Disabled */
-	rx_conf->queue_type = RX_QUEUE_TYPE_RX_LOW_PRIORITY;
+	rx_conf->threshold = cpu_to_le16(wl->conf.rx.irq_pkt_threshold);
+	rx_conf->timeout = cpu_to_le16(wl->conf.rx.irq_timeout);
+	rx_conf->mblk_threshold = cpu_to_le16(wl->conf.rx.irq_blk_threshold);
+	rx_conf->queue_type = wl->conf.rx.queue_type;
 
 	ret = wl1271_cmd_configure(wl, ACX_RX_CONFIG_OPT, rx_conf,
 				   sizeof(*rx_conf));
@@ -959,3 +1011,124 @@
 	kfree(rx_conf);
 	return ret;
 }
+
+int wl1271_acx_smart_reflex(struct wl1271 *wl)
+{
+	struct acx_smart_reflex_state *sr_state = NULL;
+	struct acx_smart_reflex_config_params *sr_param = NULL;
+	int i, ret;
+
+	wl1271_debug(DEBUG_ACX, "acx smart reflex");
+
+	sr_param = kzalloc(sizeof(*sr_param), GFP_KERNEL);
+	if (!sr_param) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < CONF_SR_ERR_TBL_COUNT; i++) {
+		struct conf_mart_reflex_err_table *e =
+			&(wl->conf.init.sr_err_tbl[i]);
+
+		sr_param->error_table[i].len = e->len;
+		sr_param->error_table[i].upper_limit = e->upper_limit;
+		memcpy(sr_param->error_table[i].values, e->values, e->len);
+	}
+
+	ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_PARAMS,
+				   sr_param, sizeof(*sr_param));
+	if (ret < 0) {
+		wl1271_warning("failed to set smart reflex params: %d", ret);
+		goto out;
+	}
+
+	sr_state = kzalloc(sizeof(*sr_state), GFP_KERNEL);
+	if (!sr_state) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* enable smart reflex */
+	sr_state->enable = wl->conf.init.sr_enable;
+
+	ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_STATE,
+				   sr_state, sizeof(*sr_state));
+	if (ret < 0) {
+		wl1271_warning("failed to set smart reflex params: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(sr_state);
+	kfree(sr_param);
+	return ret;
+
+}
+
+int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable)
+{
+	struct wl1271_acx_bet_enable *acx = NULL;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx bet enable");
+
+	if (enable && wl->conf.conn.bet_enable == CONF_BET_MODE_DISABLE)
+		goto out;
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->enable = enable ? CONF_BET_MODE_ENABLE : CONF_BET_MODE_DISABLE;
+	acx->max_consecutive = wl->conf.conn.bet_max_consecutive;
+
+	ret = wl1271_cmd_configure(wl, ACX_BET_ENABLE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx bet enable failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
+			     u8 version)
+{
+	struct wl1271_acx_arp_filter *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx arp ip filter, enable: %d", enable);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->version = version;
+	acx->enable = enable;
+
+	if (enable == true) {
+		if (version == ACX_IPV4_VERSION)
+			memcpy(acx->address, address, ACX_IPV4_ADDR_SIZE);
+		else if (version == ACX_IPV6_VERSION)
+			memcpy(acx->address, address, sizeof(acx->address));
+		else
+			wl1271_error("Invalid IP version");
+	}
+
+	ret = wl1271_cmd_configure(wl, ACX_ARP_IP_FILTER,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("failed to set arp ip filter: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 9068daa..2ce0a81 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -61,8 +61,9 @@
 					    WL1271_ACX_INTR_HW_AVAILABLE  | \
 					    WL1271_ACX_INTR_DATA)
 
-#define WL1271_INTR_MASK                   (WL1271_ACX_INTR_EVENT_A |	\
-					    WL1271_ACX_INTR_EVENT_B | \
+#define WL1271_INTR_MASK                   (WL1271_ACX_INTR_EVENT_A      | \
+					    WL1271_ACX_INTR_EVENT_B      | \
+					    WL1271_ACX_INTR_HW_AVAILABLE | \
 					    WL1271_ACX_INTR_DATA)
 
 /* Target's information element */
@@ -70,11 +71,11 @@
 	struct wl1271_cmd_header cmd;
 
 	/* acx (or information element) header */
-	u16 id;
+	__le16 id;
 
 	/* payload length (not including headers */
-	u16 len;
-};
+	__le16 len;
+} __attribute__ ((packed));
 
 struct acx_error_counter {
 	struct acx_header header;
@@ -82,21 +83,21 @@
 	/* The number of PLCP errors since the last time this */
 	/* information element was interrogated. This field is */
 	/* automatically cleared when it is interrogated.*/
-	u32 PLCP_error;
+	__le32 PLCP_error;
 
 	/* The number of FCS errors since the last time this */
 	/* information element was interrogated. This field is */
 	/* automatically cleared when it is interrogated.*/
-	u32 FCS_error;
+	__le32 FCS_error;
 
 	/* The number of MPDUs without PLCP header errors received*/
 	/* since the last time this information element was interrogated. */
 	/* This field is automatically cleared when it is interrogated.*/
-	u32 valid_frame;
+	__le32 valid_frame;
 
 	/* the number of missed sequence numbers in the squentially */
 	/* values of frames seq numbers */
-	u32 seq_num_miss;
+	__le32 seq_num_miss;
 } __attribute__ ((packed));
 
 struct acx_revision {
@@ -125,7 +126,7 @@
 	 *              (1 = first spin, 2 = second spin, and so on).
 	 * bits 24 - 31: Chip ID - The WiLink chip ID.
 	 */
-	u32 hw_version;
+	__le32 hw_version;
 } __attribute__ ((packed));
 
 enum wl1271_psm_mode {
@@ -170,7 +171,6 @@
 #define  DP_RX_PACKET_RING_CHUNK_NUM 2
 #define  DP_TX_PACKET_RING_CHUNK_NUM 2
 #define  DP_TX_COMPLETE_TIME_OUT 20
-#define  FW_TX_CMPLT_BLOCK_SIZE 16
 
 #define TX_MSDU_LIFETIME_MIN       0
 #define TX_MSDU_LIFETIME_MAX       3000
@@ -186,7 +186,7 @@
 	 * The maximum amount of time, in TU, before the
 	 * firmware discards the MSDU.
 	 */
-	u32 lifetime;
+	__le32 lifetime;
 } __attribute__ ((packed));
 
 /*
@@ -273,14 +273,14 @@
 struct acx_rx_config {
 	struct acx_header header;
 
-	u32 config_options;
-	u32 filter_options;
+	__le32 config_options;
+	__le32 filter_options;
 } __attribute__ ((packed));
 
 struct acx_packet_detection {
 	struct acx_header header;
 
-	u32 threshold;
+	__le32 threshold;
 } __attribute__ ((packed));
 
 
@@ -302,8 +302,8 @@
 } __attribute__ ((packed));
 
 
-#define ADDRESS_GROUP_MAX	(8)
-#define ADDRESS_GROUP_MAX_LEN	(ETH_ALEN * ADDRESS_GROUP_MAX)
+#define ACX_MC_ADDRESS_GROUP_MAX	(8)
+#define ADDRESS_GROUP_MAX_LEN	        (ETH_ALEN * ACX_MC_ADDRESS_GROUP_MAX)
 
 struct acx_dot11_grp_addr_tbl {
 	struct acx_header header;
@@ -314,40 +314,17 @@
 	u8 mac_table[ADDRESS_GROUP_MAX_LEN];
 } __attribute__ ((packed));
 
-
-#define  RX_TIMEOUT_PS_POLL_MIN    0
-#define  RX_TIMEOUT_PS_POLL_MAX    (200000)
-#define  RX_TIMEOUT_PS_POLL_DEF    (15)
-#define  RX_TIMEOUT_UPSD_MIN       0
-#define  RX_TIMEOUT_UPSD_MAX       (200000)
-#define  RX_TIMEOUT_UPSD_DEF       (15)
-
 struct acx_rx_timeout {
 	struct acx_header header;
 
-	/*
-	 * The longest time the STA will wait to receive
-	 * traffic from the AP after a PS-poll has been
-	 * transmitted.
-	 */
-	u16 ps_poll_timeout;
-
-	/*
-	 * The longest time the STA will wait to receive
-	 * traffic from the AP after a frame has been sent
-	 * from an UPSD enabled queue.
-	 */
-	u16 upsd_timeout;
+	__le16 ps_poll_timeout;
+	__le16 upsd_timeout;
 } __attribute__ ((packed));
 
-#define RTS_THRESHOLD_MIN              0
-#define RTS_THRESHOLD_MAX              4096
-#define RTS_THRESHOLD_DEF              2347
-
 struct acx_rts_threshold {
 	struct acx_header header;
 
-	u16 threshold;
+	__le16 threshold;
 	u8 pad[2];
 } __attribute__ ((packed));
 
@@ -408,6 +385,13 @@
 	u8 pad[3];
 } __attribute__ ((packed));
 
+struct acx_conn_monit_params {
+       struct acx_header header;
+
+       __le32 synch_fail_thold; /* number of beacons missed */
+       __le32 bss_lose_timeout; /* number of TU's from synch fail */
+} __attribute__ ((packed));
+
 enum {
 	SG_ENABLE = 0,
 	SG_DISABLE,
@@ -431,6 +415,25 @@
 	u8 pad[3];
 } __attribute__ ((packed));
 
+struct acx_smart_reflex_state {
+	struct acx_header header;
+
+	u8 enable;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+struct smart_reflex_err_table {
+	u8 len;
+	s8 upper_limit;
+	s8 values[14];
+} __attribute__ ((packed));
+
+struct acx_smart_reflex_config_params {
+	struct acx_header header;
+
+	struct smart_reflex_err_table error_table[3];
+} __attribute__ ((packed));
+
 #define PTA_ANTENNA_TYPE_DEF		  (0)
 #define PTA_BT_HP_MAXTIME_DEF		  (2000)
 #define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
@@ -463,150 +466,34 @@
 struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	/*
-	 * The minimum rate of a received WLAN packet in the STA,
-	 * during protective mode, of which a new BT-HP request
-	 * during this Rx will always be respected and gain the antenna.
-	 */
-	u32 min_rate;
-
-	/* Max time the BT HP will be respected. */
-	u16 bt_hp_max_time;
-
-	/* Max time the WLAN HP will be respected. */
-	u16 wlan_hp_max_time;
-
-	/*
-	 * The time between the last BT activity
-	 * and the moment when the sense mode returns
-	 * to SENSE_INACTIVE.
-	 */
-	u16 sense_disable_timer;
-
-	/* Time before the next BT HP instance */
-	u16 rx_time_bt_hp;
-	u16 tx_time_bt_hp;
-
-	/* range: 10-20000    default: 1500 */
-	u16 rx_time_bt_hp_fast;
-	u16 tx_time_bt_hp_fast;
-
-	/* range: 2000-65535  default: 8700 */
-	u16 wlan_cycle_fast;
-
-	/* range: 0 - 15000 (Msec) default: 1000 */
-	u16 bt_anti_starvation_period;
-
-	/* range 400-10000(Usec) default: 3000 */
-	u16 next_bt_lp_packet;
-
-	/* Deafult: worst case for BT DH5 traffic */
-	u16 wake_up_beacon;
-
-	/* range: 0-50000(Usec) default: 1050 */
-	u16 hp_dm_max_guard_time;
-
-	/*
-	 * This is to prevent both BT & WLAN antenna
-	 * starvation.
-	 * Range: 100-50000(Usec) default:2550
-	 */
-	u16 next_wlan_packet;
-
-	/* 0 -> shared antenna */
-	u8 antenna_type;
-
-	/*
-	 * 0 -> TI legacy
-	 * 1 -> Palau
-	 */
-	u8 signal_type;
-
-	/*
-	 * BT AFH status
-	 * 0 -> no AFH
-	 * 1 -> from dedicated GPIO
-	 * 2 -> AFH on (from host)
-	 */
-	u8 afh_leverage_on;
-
-	/*
-	 * The number of cycles during which no
-	 * TX will be sent after 1 cycle of RX
-	 * transaction in protective mode
-	 */
-	u8 quiet_cycle_num;
-
-	/*
-	 * The maximum number of CTSs that will
-	 * be sent for receiving RX packet in
-	 * protective mode
-	 */
-	u8 max_cts;
-
-	/*
-	 * The number of WLAN packets
-	 * transferred in common mode before
-	 * switching to BT.
-	 */
-	u8 wlan_packets_num;
-
-	/*
-	 * The number of BT packets
-	 * transferred in common mode before
-	 * switching to WLAN.
-	 */
-	u8 bt_packets_num;
-
-	/* range: 1-255  default: 5 */
-	u8 missed_rx_avalanche;
-
-	/* range: 0-1    default: 1 */
-	u8 wlan_elp_hp;
-
-	/* range: 0 - 15  default: 4 */
-	u8 bt_anti_starvation_cycles;
-
-	u8 ack_mode_dual_ant;
-
-	/*
-	 * Allow PA_SD assertion/de-assertion
-	 * during enabled BT activity.
-	 */
-	u8 pa_sd_enable;
-
-	/*
-	 * Enable/Disable PTA in auto mode:
-	 * Support Both Active & P.S modes
-	 */
-	u8 pta_auto_mode_enable;
-
-	/* range: 0 - 20  default: 1 */
-	u8 bt_hp_respected_num;
+	__le32 per_threshold;
+	__le32 max_scan_compensation_time;
+	__le16 nfs_sample_interval;
+	u8 load_ratio;
+	u8 auto_ps_mode;
+	u8 probe_req_compensation;
+	u8 scan_window_compensation;
+	u8 antenna_config;
+	u8 beacon_miss_threshold;
+	__le32 rate_adaptation_threshold;
+	s8 rate_adaptation_snr;
+	u8 padding[3];
 } __attribute__ ((packed));
 
-#define CCA_THRSH_ENABLE_ENERGY_D       0x140A
-#define CCA_THRSH_DISABLE_ENERGY_D      0xFFEF
-
 struct acx_energy_detection {
 	struct acx_header header;
 
 	/* The RX Clear Channel Assessment threshold in the PHY */
-	u16 rx_cca_threshold;
+	__le16 rx_cca_threshold;
 	u8 tx_energy_detection;
 	u8 pad;
 } __attribute__ ((packed));
 
-#define BCN_RX_TIMEOUT_DEF_VALUE        10000
-#define BROADCAST_RX_TIMEOUT_DEF_VALUE  20000
-#define RX_BROADCAST_IN_PS_DEF_VALUE    1
-#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
-
 struct acx_beacon_broadcast {
 	struct acx_header header;
 
-	u16 beacon_rx_timeout;
-	u16 broadcast_timeout;
+	__le16 beacon_rx_timeout;
+	__le16 broadcast_timeout;
 
 	/* Enables receiving of broadcast packets in PS mode */
 	u8 rx_broadcast_in_ps;
@@ -619,8 +506,8 @@
 struct acx_event_mask {
 	struct acx_header header;
 
-	u32 event_mask;
-	u32 high_event_mask; /* Unused */
+	__le32 event_mask;
+	__le32 high_event_mask; /* Unused */
 } __attribute__ ((packed));
 
 #define CFG_RX_FCS		BIT(2)
@@ -657,11 +544,15 @@
 #define SCAN_TRIGGERED		BIT(2)
 #define SCAN_PRIORITY_HIGH	BIT(3)
 
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE      0x01
+#define DF_SNIFF_MODE_ENABLE       0x80
+
 struct acx_feature_config {
 	struct acx_header header;
 
-	u32 options;
-	u32 data_flow_options;
+	__le32 options;
+	__le32 data_flow_options;
 } __attribute__ ((packed));
 
 struct acx_current_tx_power {
@@ -671,14 +562,6 @@
 	u8  padding[3];
 } __attribute__ ((packed));
 
-enum acx_wake_up_event {
-	WAKE_UP_EVENT_BEACON_BITMAP	= 0x01, /* Wake on every Beacon*/
-	WAKE_UP_EVENT_DTIM_BITMAP	= 0x02,	/* Wake on every DTIM*/
-	WAKE_UP_EVENT_N_DTIM_BITMAP	= 0x04, /* Wake on every Nth DTIM */
-	WAKE_UP_EVENT_N_BEACONS_BITMAP	= 0x08, /* Wake on every Nth Beacon */
-	WAKE_UP_EVENT_BITS_MASK		= 0x0F
-};
-
 struct acx_wake_up_condition {
 	struct acx_header header;
 
@@ -693,7 +576,7 @@
 	/*
 	 * To be set when associated with an AP.
 	 */
-	u16 aid;
+	__le16 aid;
 	u8 pad[2];
 } __attribute__ ((packed));
 
@@ -725,152 +608,152 @@
 } __attribute__ ((packed));
 
 struct acx_tx_statistics {
-	u32 internal_desc_overflow;
+	__le32 internal_desc_overflow;
 }  __attribute__ ((packed));
 
 struct acx_rx_statistics {
-	u32 out_of_mem;
-	u32 hdr_overflow;
-	u32 hw_stuck;
-	u32 dropped;
-	u32 fcs_err;
-	u32 xfr_hint_trig;
-	u32 path_reset;
-	u32 reset_counter;
+	__le32 out_of_mem;
+	__le32 hdr_overflow;
+	__le32 hw_stuck;
+	__le32 dropped;
+	__le32 fcs_err;
+	__le32 xfr_hint_trig;
+	__le32 path_reset;
+	__le32 reset_counter;
 } __attribute__ ((packed));
 
 struct acx_dma_statistics {
-	u32 rx_requested;
-	u32 rx_errors;
-	u32 tx_requested;
-	u32 tx_errors;
+	__le32 rx_requested;
+	__le32 rx_errors;
+	__le32 tx_requested;
+	__le32 tx_errors;
 }  __attribute__ ((packed));
 
 struct acx_isr_statistics {
 	/* host command complete */
-	u32 cmd_cmplt;
+	__le32 cmd_cmplt;
 
 	/* fiqisr() */
-	u32 fiqs;
+	__le32 fiqs;
 
 	/* (INT_STS_ND & INT_TRIG_RX_HEADER) */
-	u32 rx_headers;
+	__le32 rx_headers;
 
 	/* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
-	u32 rx_completes;
+	__le32 rx_completes;
 
 	/* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
-	u32 rx_mem_overflow;
+	__le32 rx_mem_overflow;
 
 	/* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
-	u32 rx_rdys;
+	__le32 rx_rdys;
 
 	/* irqisr() */
-	u32 irqs;
+	__le32 irqs;
 
 	/* (INT_STS_ND & INT_TRIG_TX_PROC) */
-	u32 tx_procs;
+	__le32 tx_procs;
 
 	/* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
-	u32 decrypt_done;
+	__le32 decrypt_done;
 
 	/* (INT_STS_ND & INT_TRIG_DMA0) */
-	u32 dma0_done;
+	__le32 dma0_done;
 
 	/* (INT_STS_ND & INT_TRIG_DMA1) */
-	u32 dma1_done;
+	__le32 dma1_done;
 
 	/* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
-	u32 tx_exch_complete;
+	__le32 tx_exch_complete;
 
 	/* (INT_STS_ND & INT_TRIG_COMMAND) */
-	u32 commands;
+	__le32 commands;
 
 	/* (INT_STS_ND & INT_TRIG_RX_PROC) */
-	u32 rx_procs;
+	__le32 rx_procs;
 
 	/* (INT_STS_ND & INT_TRIG_PM_802) */
-	u32 hw_pm_mode_changes;
+	__le32 hw_pm_mode_changes;
 
 	/* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
-	u32 host_acknowledges;
+	__le32 host_acknowledges;
 
 	/* (INT_STS_ND & INT_TRIG_PM_PCI) */
-	u32 pci_pm;
+	__le32 pci_pm;
 
 	/* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
-	u32 wakeups;
+	__le32 wakeups;
 
 	/* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
-	u32 low_rssi;
+	__le32 low_rssi;
 } __attribute__ ((packed));
 
 struct acx_wep_statistics {
 	/* WEP address keys configured */
-	u32 addr_key_count;
+	__le32 addr_key_count;
 
 	/* default keys configured */
-	u32 default_key_count;
+	__le32 default_key_count;
 
-	u32 reserved;
+	__le32 reserved;
 
 	/* number of times that WEP key not found on lookup */
-	u32 key_not_found;
+	__le32 key_not_found;
 
 	/* number of times that WEP key decryption failed */
-	u32 decrypt_fail;
+	__le32 decrypt_fail;
 
 	/* WEP packets decrypted */
-	u32 packets;
+	__le32 packets;
 
 	/* WEP decrypt interrupts */
-	u32 interrupt;
+	__le32 interrupt;
 } __attribute__ ((packed));
 
 #define ACX_MISSED_BEACONS_SPREAD 10
 
 struct acx_pwr_statistics {
 	/* the amount of enters into power save mode (both PD & ELP) */
-	u32 ps_enter;
+	__le32 ps_enter;
 
 	/* the amount of enters into ELP mode */
-	u32 elp_enter;
+	__le32 elp_enter;
 
 	/* the amount of missing beacon interrupts to the host */
-	u32 missing_bcns;
+	__le32 missing_bcns;
 
 	/* the amount of wake on host-access times */
-	u32 wake_on_host;
+	__le32 wake_on_host;
 
 	/* the amount of wake on timer-expire */
-	u32 wake_on_timer_exp;
+	__le32 wake_on_timer_exp;
 
 	/* the number of packets that were transmitted with PS bit set */
-	u32 tx_with_ps;
+	__le32 tx_with_ps;
 
 	/* the number of packets that were transmitted with PS bit clear */
-	u32 tx_without_ps;
+	__le32 tx_without_ps;
 
 	/* the number of received beacons */
-	u32 rcvd_beacons;
+	__le32 rcvd_beacons;
 
 	/* the number of entering into PowerOn (power save off) */
-	u32 power_save_off;
+	__le32 power_save_off;
 
 	/* the number of entries into power save mode */
-	u16 enable_ps;
+	__le16 enable_ps;
 
 	/*
 	 * the number of exits from power save, not including failed PS
 	 * transitions
 	 */
-	u16 disable_ps;
+	__le16 disable_ps;
 
 	/*
 	 * the number of times the TSF counter was adjusted because
 	 * of drift
 	 */
-	u32 fix_tsf_ps;
+	__le32 fix_tsf_ps;
 
 	/* Gives statistics about the spread continuous missed beacons.
 	 * The 16 LSB are dedicated for the PS mode.
@@ -881,53 +764,53 @@
 	 * ...
 	 * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
 	*/
-	u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+	__le32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
 
 	/* the number of beacons in awake mode */
-	u32 rcvd_awake_beacons;
+	__le32 rcvd_awake_beacons;
 } __attribute__ ((packed));
 
 struct acx_mic_statistics {
-	u32 rx_pkts;
-	u32 calc_failure;
+	__le32 rx_pkts;
+	__le32 calc_failure;
 } __attribute__ ((packed));
 
 struct acx_aes_statistics {
-	u32 encrypt_fail;
-	u32 decrypt_fail;
-	u32 encrypt_packets;
-	u32 decrypt_packets;
-	u32 encrypt_interrupt;
-	u32 decrypt_interrupt;
+	__le32 encrypt_fail;
+	__le32 decrypt_fail;
+	__le32 encrypt_packets;
+	__le32 decrypt_packets;
+	__le32 encrypt_interrupt;
+	__le32 decrypt_interrupt;
 } __attribute__ ((packed));
 
 struct acx_event_statistics {
-	u32 heart_beat;
-	u32 calibration;
-	u32 rx_mismatch;
-	u32 rx_mem_empty;
-	u32 rx_pool;
-	u32 oom_late;
-	u32 phy_transmit_error;
-	u32 tx_stuck;
+	__le32 heart_beat;
+	__le32 calibration;
+	__le32 rx_mismatch;
+	__le32 rx_mem_empty;
+	__le32 rx_pool;
+	__le32 oom_late;
+	__le32 phy_transmit_error;
+	__le32 tx_stuck;
 } __attribute__ ((packed));
 
 struct acx_ps_statistics {
-	u32 pspoll_timeouts;
-	u32 upsd_timeouts;
-	u32 upsd_max_sptime;
-	u32 upsd_max_apturn;
-	u32 pspoll_max_apturn;
-	u32 pspoll_utilization;
-	u32 upsd_utilization;
+	__le32 pspoll_timeouts;
+	__le32 upsd_timeouts;
+	__le32 upsd_max_sptime;
+	__le32 upsd_max_apturn;
+	__le32 pspoll_max_apturn;
+	__le32 pspoll_utilization;
+	__le32 upsd_utilization;
 } __attribute__ ((packed));
 
 struct acx_rxpipe_statistics {
-	u32 rx_prep_beacon_drop;
-	u32 descr_host_int_trig_rx_data;
-	u32 beacon_buffer_thres_host_int_trig_rx_data;
-	u32 missed_beacon_host_int_trig_rx_data;
-	u32 tx_xfr_host_int_trig_rx_data;
+	__le32 rx_prep_beacon_drop;
+	__le32 descr_host_int_trig_rx_data;
+	__le32 beacon_buffer_thres_host_int_trig_rx_data;
+	__le32 missed_beacon_host_int_trig_rx_data;
+	__le32 tx_xfr_host_int_trig_rx_data;
 } __attribute__ ((packed));
 
 struct acx_statistics {
@@ -946,13 +829,8 @@
 	struct acx_rxpipe_statistics rxpipe;
 } __attribute__ ((packed));
 
-#define ACX_MAX_RATE_CLASSES       8
-#define ACX_RATE_MASK_UNSPECIFIED  0
-#define ACX_RATE_MASK_ALL          0x1eff
-#define ACX_RATE_RETRY_LIMIT       10
-
 struct acx_rate_class {
-	u32 enabled_rates;
+	__le32 enabled_rates;
 	u8 short_retry_limit;
 	u8 long_retry_limit;
 	u8 aflags;
@@ -962,47 +840,20 @@
 struct acx_rate_policy {
 	struct acx_header header;
 
-	u32 rate_class_cnt;
-	struct acx_rate_class rate_class[ACX_MAX_RATE_CLASSES];
+	__le32 rate_class_cnt;
+	struct acx_rate_class rate_class[CONF_TX_MAX_RATE_CLASSES];
 } __attribute__ ((packed));
 
-#define WL1271_ACX_AC_COUNT 4
-
 struct acx_ac_cfg {
 	struct acx_header header;
 	u8 ac;
 	u8 cw_min;
-	u16 cw_max;
+	__le16 cw_max;
 	u8 aifsn;
 	u8 reserved;
-	u16 tx_op_limit;
+	__le16 tx_op_limit;
 } __attribute__ ((packed));
 
-enum wl1271_acx_ac {
-	WL1271_ACX_AC_BE = 0,
-	WL1271_ACX_AC_BK = 1,
-	WL1271_ACX_AC_VI = 2,
-	WL1271_ACX_AC_VO = 3,
-	WL1271_ACX_AC_CTS2SELF = 4,
-	WL1271_ACX_AC_ANY_TID = 0x1F,
-	WL1271_ACX_AC_INVALID = 0xFF,
-};
-
-enum wl1271_acx_ps_scheme {
-	WL1271_ACX_PS_SCHEME_LEGACY = 0,
-	WL1271_ACX_PS_SCHEME_UPSD_TRIGGER = 1,
-	WL1271_ACX_PS_SCHEME_LEGACY_PSPOLL = 2,
-	WL1271_ACX_PS_SCHEME_SAPSD = 3,
-};
-
-enum wl1271_acx_ack_policy {
-	WL1271_ACX_ACK_POLICY_LEGACY = 0,
-	WL1271_ACX_ACK_POLICY_NO_ACK = 1,
-	WL1271_ACX_ACK_POLICY_BLOCK = 2,
-};
-
-#define WL1271_ACX_TID_COUNT 7
-
 struct acx_tid_config {
 	struct acx_header header;
 	u8 queue_id;
@@ -1011,22 +862,19 @@
 	u8 ps_scheme;
 	u8 ack_policy;
 	u8 padding[3];
-	u32 apsd_conf[2];
+	__le32 apsd_conf[2];
 } __attribute__ ((packed));
 
 struct acx_frag_threshold {
 	struct acx_header header;
-	u16 frag_threshold;
+	__le16 frag_threshold;
 	u8 padding[2];
 } __attribute__ ((packed));
 
-#define WL1271_ACX_TX_COMPL_TIMEOUT   5
-#define WL1271_ACX_TX_COMPL_THRESHOLD 5
-
 struct acx_tx_config_options {
 	struct acx_header header;
-	u16 tx_compl_timeout;     /* msec */
-	u16 tx_compl_threshold;   /* number of packets */
+	__le16 tx_compl_timeout;     /* msec */
+	__le16 tx_compl_threshold;   /* number of packets */
 } __attribute__ ((packed));
 
 #define ACX_RX_MEM_BLOCKS     64
@@ -1041,79 +889,87 @@
 	u8 tx_min_mem_block_num;
 	u8 num_stations;
 	u8 num_ssid_profiles;
-	u32 total_tx_descriptors;
+	__le32 total_tx_descriptors;
 } __attribute__ ((packed));
 
 struct wl1271_acx_mem_map {
 	struct acx_header header;
 
-	void *code_start;
-	void *code_end;
+	__le32 code_start;
+	__le32 code_end;
 
-	void *wep_defkey_start;
-	void *wep_defkey_end;
+	__le32 wep_defkey_start;
+	__le32 wep_defkey_end;
 
-	void *sta_table_start;
-	void *sta_table_end;
+	__le32 sta_table_start;
+	__le32 sta_table_end;
 
-	void *packet_template_start;
-	void *packet_template_end;
+	__le32 packet_template_start;
+	__le32 packet_template_end;
 
 	/* Address of the TX result interface (control block) */
-	u32 tx_result;
-	u32 tx_result_queue_start;
+	__le32 tx_result;
+	__le32 tx_result_queue_start;
 
-	void *queue_memory_start;
-	void *queue_memory_end;
+	__le32 queue_memory_start;
+	__le32 queue_memory_end;
 
-	u32 packet_memory_pool_start;
-	u32 packet_memory_pool_end;
+	__le32 packet_memory_pool_start;
+	__le32 packet_memory_pool_end;
 
-	void *debug_buffer1_start;
-	void *debug_buffer1_end;
+	__le32 debug_buffer1_start;
+	__le32 debug_buffer1_end;
 
-	void *debug_buffer2_start;
-	void *debug_buffer2_end;
+	__le32 debug_buffer2_start;
+	__le32 debug_buffer2_end;
 
 	/* Number of blocks FW allocated for TX packets */
-	u32 num_tx_mem_blocks;
+	__le32 num_tx_mem_blocks;
 
 	/* Number of blocks FW allocated for RX packets */
-	u32 num_rx_mem_blocks;
+	__le32 num_rx_mem_blocks;
 
 	/* the following 4 fields are valid in SLAVE mode only */
 	u8 *tx_cbuf;
 	u8 *rx_cbuf;
-	void *rx_ctrl;
-	void *tx_ctrl;
+	__le32 rx_ctrl;
+	__le32 tx_ctrl;
 } __attribute__ ((packed));
 
-enum wl1271_acx_rx_queue_type {
-	RX_QUEUE_TYPE_RX_LOW_PRIORITY,    /* All except the high priority */
-	RX_QUEUE_TYPE_RX_HIGH_PRIORITY,   /* Management and voice packets */
-	RX_QUEUE_TYPE_NUM,
-	RX_QUEUE_TYPE_MAX = USHORT_MAX
-};
-
-#define WL1271_RX_INTR_THRESHOLD_DEF  0       /* no pacing, send interrupt on
-					       * every event */
-#define WL1271_RX_INTR_THRESHOLD_MIN  0
-#define WL1271_RX_INTR_THRESHOLD_MAX  15
-
-#define WL1271_RX_INTR_TIMEOUT_DEF    5
-#define WL1271_RX_INTR_TIMEOUT_MIN    1
-#define WL1271_RX_INTR_TIMEOUT_MAX    100
-
 struct wl1271_acx_rx_config_opt {
 	struct acx_header header;
 
-	u16 mblk_threshold;
-	u16 threshold;
-	u16 timeout;
+	__le16 mblk_threshold;
+	__le16 threshold;
+	__le16 timeout;
 	u8 queue_type;
 	u8 reserved;
 } __attribute__ ((packed));
 
+
+struct wl1271_acx_bet_enable {
+	struct acx_header header;
+
+	u8 enable;
+	u8 max_consecutive;
+	u8 padding[2];
+} __attribute__ ((packed));
+
+#define ACX_IPV4_VERSION 4
+#define ACX_IPV6_VERSION 6
+#define ACX_IPV4_ADDR_SIZE 4
+struct wl1271_acx_arp_filter {
+	struct acx_header header;
+	u8 version;         /* ACX_IPV4_VERSION, ACX_IPV6_VERSION */
+	u8 enable;          /* 1 to enable ARP filtering, 0 to disable */
+	u8 padding[2];
+	u8 address[16];     /* The configured device IP address - all ARP
+			       requests directed to this IP address will pass
+			       through. For IPv4, the first four bytes are
+			       used. */
+} __attribute__((packed));
+
+
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
 	ACX_MEM_CFG                 = 0x0003,
@@ -1170,6 +1026,9 @@
 	ACX_PEER_HT_CAP             = 0x0057,
 	ACX_HT_BSS_OPERATION        = 0x0058,
 	ACX_COEX_ACTIVITY           = 0x0059,
+	ACX_SET_SMART_REFLEX_DEBUG  = 0x005A,
+	ACX_SET_SMART_REFLEX_STATE  = 0x005B,
+	ACX_SET_SMART_REFLEX_PARAMS = 0x005F,
 	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
 	DOT11_CUR_TX_PWR            = 0x100D,
 	DOT11_RX_DOT11_MODE         = 0x1012,
@@ -1182,23 +1041,24 @@
 };
 
 
-int wl1271_acx_wake_up_conditions(struct wl1271 *wl, u8 wake_up_event,
-				  u8 listen_interval);
+int wl1271_acx_wake_up_conditions(struct wl1271 *wl);
 int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth);
 int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len);
 int wl1271_acx_tx_power(struct wl1271 *wl, int power);
 int wl1271_acx_feature_cfg(struct wl1271 *wl);
 int wl1271_acx_mem_map(struct wl1271 *wl,
 		       struct acx_header *mem_map, size_t len);
-int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl, u32 life_time);
+int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl);
 int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter);
 int wl1271_acx_pd_threshold(struct wl1271 *wl);
 int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time);
-int wl1271_acx_group_address_tbl(struct wl1271 *wl);
+int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
+				 void *mc_list, u32 mc_list_len);
 int wl1271_acx_service_period_timeout(struct wl1271 *wl);
 int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
-int wl1271_acx_beacon_filter_opt(struct wl1271 *wl);
+int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
+int wl1271_acx_conn_monit_params(struct wl1271 *wl);
 int wl1271_acx_sg_enable(struct wl1271 *wl);
 int wl1271_acx_sg_cfg(struct wl1271 *wl);
 int wl1271_acx_cca_threshold(struct wl1271 *wl);
@@ -1207,9 +1067,9 @@
 int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask);
 int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble);
 int wl1271_acx_cts_protect(struct wl1271 *wl,
-			    enum acx_ctsprotect_type ctsprotect);
+			   enum acx_ctsprotect_type ctsprotect);
 int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
-int wl1271_acx_rate_policies(struct wl1271 *wl);
+int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates);
 int wl1271_acx_ac_cfg(struct wl1271 *wl);
 int wl1271_acx_tid_cfg(struct wl1271 *wl);
 int wl1271_acx_frag_threshold(struct wl1271 *wl);
@@ -1217,5 +1077,9 @@
 int wl1271_acx_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_init_mem_config(struct wl1271 *wl);
 int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
+int wl1271_acx_smart_reflex(struct wl1271 *wl);
+int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
+int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
+			     u8 version);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 8228ef4..b7c9645 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -39,6 +39,14 @@
 			.start = REGISTERS_BASE,
 			.size  = 0x00008800
 		},
+		.mem2 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+		.mem3 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
 	},
 
 	[PART_WORK] = {
@@ -48,7 +56,15 @@
 		},
 		.reg = {
 			.start = REGISTERS_BASE,
-			.size  = 0x0000b000
+			.size  = 0x0000a000
+		},
+		.mem2 = {
+			.start = 0x003004f8,
+			.size  = 0x00000004
+		},
+		.mem3 = {
+			.start = 0x00040404,
+			.size  = 0x00000000
 		},
 	},
 
@@ -60,6 +76,14 @@
 		.reg = {
 			.start = DRPW_BASE,
 			.size  = 0x00006000
+		},
+		.mem2 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+		.mem3 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
 		}
 	}
 };
@@ -69,19 +93,19 @@
 	u32 cpu_ctrl;
 
 	/* 10.5.0 run the firmware (I) */
-	cpu_ctrl = wl1271_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+	cpu_ctrl = wl1271_spi_read32(wl, ACX_REG_ECPU_CONTROL);
 
 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
-	wl1271_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+	wl1271_spi_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
 }
 
 static void wl1271_boot_fw_version(struct wl1271 *wl)
 {
 	struct wl1271_static_data static_data;
 
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr,
-			    &static_data, sizeof(static_data));
+	wl1271_spi_read(wl, wl->cmd_box_addr,
+			&static_data, sizeof(static_data), false);
 
 	strncpy(wl->chip.fw_ver, static_data.fw_version,
 		sizeof(wl->chip.fw_ver));
@@ -93,8 +117,9 @@
 static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 					     size_t fw_data_len, u32 dest)
 {
+	struct wl1271_partition_set partition;
 	int addr, chunk_num, partition_limit;
-	u8 *p;
+	u8 *p, *chunk;
 
 	/* whal_FwCtrl_LoadFwImageSm() */
 
@@ -103,16 +128,20 @@
 	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
 		     fw_data_len, CHUNK_SIZE);
 
-
 	if ((fw_data_len % 4) != 0) {
 		wl1271_error("firmware length not multiple of four");
 		return -EIO;
 	}
 
-	wl1271_set_partition(wl, dest,
-			     part_table[PART_DOWN].mem.size,
-			     part_table[PART_DOWN].reg.start,
-			     part_table[PART_DOWN].reg.size);
+	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!chunk) {
+		wl1271_error("allocation for firmware upload chunk failed");
+		return -ENOMEM;
+	}
+
+	memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
+	partition.mem.start = dest;
+	wl1271_set_partition(wl, &partition);
 
 	/* 10.1 set partition limit and chunk num */
 	chunk_num = 0;
@@ -125,21 +154,17 @@
 			addr = dest + chunk_num * CHUNK_SIZE;
 			partition_limit = chunk_num * CHUNK_SIZE +
 				part_table[PART_DOWN].mem.size;
-
-			/* FIXME: Over 80 chars! */
-			wl1271_set_partition(wl,
-					     addr,
-					     part_table[PART_DOWN].mem.size,
-					     part_table[PART_DOWN].reg.start,
-					     part_table[PART_DOWN].reg.size);
+			partition.mem.start = addr;
+			wl1271_set_partition(wl, &partition);
 		}
 
 		/* 10.3 upload the chunk */
 		addr = dest + chunk_num * CHUNK_SIZE;
 		p = buf + chunk_num * CHUNK_SIZE;
+		memcpy(chunk, p, CHUNK_SIZE);
 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
 			     p, addr);
-		wl1271_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+		wl1271_spi_write(wl, addr, chunk, CHUNK_SIZE, false);
 
 		chunk_num++;
 	}
@@ -147,28 +172,31 @@
 	/* 10.4 upload the last chunk */
 	addr = dest + chunk_num * CHUNK_SIZE;
 	p = buf + chunk_num * CHUNK_SIZE;
+	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
 		     fw_data_len % CHUNK_SIZE, p, addr);
-	wl1271_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+	wl1271_spi_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
 
+	kfree(chunk);
 	return 0;
 }
 
 static int wl1271_boot_upload_firmware(struct wl1271 *wl)
 {
 	u32 chunks, addr, len;
+	int ret = 0;
 	u8 *fw;
 
 	fw = wl->fw;
-	chunks = be32_to_cpup((u32 *) fw);
+	chunks = be32_to_cpup((__be32 *) fw);
 	fw += sizeof(u32);
 
 	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
 
 	while (chunks--) {
-		addr = be32_to_cpup((u32 *) fw);
+		addr = be32_to_cpup((__be32 *) fw);
 		fw += sizeof(u32);
-		len = be32_to_cpup((u32 *) fw);
+		len = be32_to_cpup((__be32 *) fw);
 		fw += sizeof(u32);
 
 		if (len > 300000) {
@@ -177,11 +205,13 @@
 		}
 		wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
 			     chunks, addr, len);
-		wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+		ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+		if (ret != 0)
+			break;
 		fw += len;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int wl1271_boot_upload_nvs(struct wl1271 *wl)
@@ -235,7 +265,7 @@
 			wl1271_debug(DEBUG_BOOT,
 				     "nvs burst write 0x%x: 0x%x",
 				     dest_addr, val);
-			wl1271_reg_write32(wl, dest_addr, val);
+			wl1271_spi_write32(wl, dest_addr, val);
 
 			nvs_ptr += 4;
 			dest_addr += 4;
@@ -253,20 +283,18 @@
 	/* FIXME: The driver sets the partition here, but this is not needed,
 	   since it sets to the same one as currently in use */
 	/* Now we must set the partition correctly */
-	wl1271_set_partition(wl,
-			     part_table[PART_WORK].mem.start,
-			     part_table[PART_WORK].mem.size,
-			     part_table[PART_WORK].reg.start,
-			     part_table[PART_WORK].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	/* Copy the NVS tables to a new block to ensure alignment */
 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
+	if (!nvs_aligned)
+		return -ENOMEM;
 
 	/* And finally we upload the NVS tables */
 	/* FIXME: In wl1271, we upload everything at once.
 	   No endianness handling needed here?! The ref driver doesn't do
 	   anything about it at this point */
-	wl1271_spi_mem_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len);
+	wl1271_spi_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
 
 	kfree(nvs_aligned);
 	return 0;
@@ -275,9 +303,9 @@
 static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
 {
 	enable_irq(wl->irq);
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
 			   WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
-	wl1271_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+	wl1271_spi_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
 }
 
 static int wl1271_boot_soft_reset(struct wl1271 *wl)
@@ -286,12 +314,13 @@
 	u32 boot_data;
 
 	/* perform soft reset */
-	wl1271_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+	wl1271_spi_write32(wl, ACX_REG_SLV_SOFT_RESET,
+			   ACX_SLV_SOFT_RESET_BIT);
 
 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
 	while (1) {
-		boot_data = wl1271_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		boot_data = wl1271_spi_read32(wl, ACX_REG_SLV_SOFT_RESET);
 		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
 		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
 			break;
@@ -307,10 +336,10 @@
 	}
 
 	/* disable Rx/Tx */
-	wl1271_reg_write32(wl, ENABLE, 0x0);
+	wl1271_spi_write32(wl, ENABLE, 0x0);
 
 	/* disable auto calibration on start*/
-	wl1271_reg_write32(wl, SPARE_A2, 0xffff);
+	wl1271_spi_write32(wl, SPARE_A2, 0xffff);
 
 	return 0;
 }
@@ -322,7 +351,7 @@
 
 	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
-	chip_id = wl1271_reg_read32(wl, CHIP_ID_B);
+	chip_id = wl1271_spi_read32(wl, CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
@@ -335,7 +364,8 @@
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		interrupt = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		interrupt = wl1271_spi_read32(wl,
+					      ACX_REG_INTERRUPT_NO_CLEAR);
 
 		if (interrupt == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
@@ -344,30 +374,26 @@
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) {
-			wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
 					   WL1271_ACX_INTR_INIT_COMPLETE);
 			break;
 		}
 	}
 
-	if (loop >= INIT_LOOP) {
+	if (loop > INIT_LOOP) {
 		wl1271_error("timeout waiting for the hardware to "
 			     "complete initialization");
 		return -EIO;
 	}
 
 	/* get hardware config command mail box */
-	wl->cmd_box_addr = wl1271_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+	wl->cmd_box_addr = wl1271_spi_read32(wl, REG_COMMAND_MAILBOX_PTR);
 
 	/* get hardware config event mail box */
-	wl->event_box_addr = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->event_box_addr = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR);
 
 	/* set the working partition to its "running" mode offset */
-	wl1271_set_partition(wl,
-			     part_table[PART_WORK].mem.start,
-			     part_table[PART_WORK].mem.size,
-			     part_table[PART_WORK].reg.start,
-			     part_table[PART_WORK].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
 		     wl->cmd_box_addr, wl->event_box_addr);
@@ -379,11 +405,10 @@
 	 * ready to receive event from the command mailbox
 	 */
 
-	/* enable gpio interrupts */
-	wl1271_boot_enable_interrupts(wl);
-
-	/* unmask all mbox events  */
-	wl->event_mask = 0xffffffff;
+	/* unmask required mbox events  */
+	wl->event_mask = BSS_LOSE_EVENT_ID |
+		SCAN_COMPLETE_EVENT_ID |
+		PS_REPORT_EVENT_ID;
 
 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
@@ -399,34 +424,13 @@
 
 static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
 {
-	u32 polarity, status, i;
+	u32 polarity;
 
-	wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
-	wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_READ);
-
-	/* Wait until the command is complete (ie. bit 18 is set) */
-	for (i = 0; i < OCP_CMD_LOOP; i++) {
-		polarity = wl1271_reg_read32(wl, OCP_DATA_READ);
-		if (polarity & OCP_READY_MASK)
-			break;
-	}
-	if (i == OCP_CMD_LOOP) {
-		wl1271_error("OCP command timeout!");
-		return -EIO;
-	}
-
-	status = polarity & OCP_STATUS_MASK;
-	if (status != OCP_STATUS_OK) {
-		wl1271_error("OCP command failed (%d)", status);
-		return -EIO;
-	}
+	polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);
 
 	/* We use HIGH polarity, so unset the LOW bit */
 	polarity &= ~POLARITY_LOW;
-
-	wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
-	wl1271_reg_write32(wl, OCP_DATA_WRITE, polarity);
-	wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+	wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);
 
 	return 0;
 }
@@ -436,16 +440,32 @@
 	int ret = 0;
 	u32 tmp, clk, pause;
 
-	if (REF_CLOCK == 0 || REF_CLOCK == 2)
-		/* ref clk: 19.2/38.4 */
+	if (REF_CLOCK == 0 || REF_CLOCK == 2 || REF_CLOCK == 4)
+		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
 	else if (REF_CLOCK == 1 || REF_CLOCK == 3)
 		/* ref clk: 26/52 */
 		clk = 0x5;
 
-	wl1271_reg_write32(wl, PLL_PARAMETERS, clk);
+	if (REF_CLOCK != 0) {
+		u16 val;
+		/* Set clock type */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
+		val &= FREF_CLK_TYPE_BITS;
+		val |= CLK_REQ_PRCM;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+	} else {
+		u16 val;
+		/* Set clock polarity */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+		val &= FREF_CLK_POLARITY_BITS;
+		val |= CLK_REQ_OUTN_SEL;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+	}
 
-	pause = wl1271_reg_read32(wl, PLL_PARAMETERS);
+	wl1271_spi_write32(wl, PLL_PARAMETERS, clk);
+
+	pause = wl1271_spi_read32(wl, PLL_PARAMETERS);
 
 	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
 
@@ -454,39 +474,31 @@
 					   * 0x3ff (magic number ).  How does
 					   * this work?! */
 	pause |= WU_COUNTER_PAUSE_VAL;
-	wl1271_reg_write32(wl, WU_COUNTER_PAUSE, pause);
+	wl1271_spi_write32(wl, WU_COUNTER_PAUSE, pause);
 
 	/* Continue the ELP wake up sequence */
-	wl1271_reg_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	wl1271_spi_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);
 
-	wl1271_set_partition(wl,
-			     part_table[PART_DRPW].mem.start,
-			     part_table[PART_DRPW].mem.size,
-			     part_table[PART_DRPW].reg.start,
-			     part_table[PART_DRPW].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_DRPW]);
 
 	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
 	   to be used by DRPw FW. The RTRIM value will be added by the FW
 	   before taking DRPw out of reset */
 
 	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
-	clk = wl1271_reg_read32(wl, DRPW_SCRATCH_START);
+	clk = wl1271_spi_read32(wl, DRPW_SCRATCH_START);
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
 	/* 2 */
 	clk |= (REF_CLOCK << 1) << 4;
-	wl1271_reg_write32(wl, DRPW_SCRATCH_START, clk);
+	wl1271_spi_write32(wl, DRPW_SCRATCH_START, clk);
 
-	wl1271_set_partition(wl,
-			     part_table[PART_WORK].mem.start,
-			     part_table[PART_WORK].mem.size,
-			     part_table[PART_WORK].reg.start,
-			     part_table[PART_WORK].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	/* Disable interrupts */
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 
 	ret = wl1271_boot_soft_reset(wl);
 	if (ret < 0)
@@ -501,21 +513,22 @@
 	 * ACX_EEPROMLESS_IND_REG */
 	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
 
-	wl1271_reg_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
+	wl1271_spi_write32(wl, ACX_EEPROMLESS_IND_REG,
+			   ACX_EEPROMLESS_IND_REG);
 
-	tmp = wl1271_reg_read32(wl, CHIP_ID_B);
+	tmp = wl1271_spi_read32(wl, CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 
 	/* 6. read the EEPROM parameters */
-	tmp = wl1271_reg_read32(wl, SCR_PAD2);
+	tmp = wl1271_spi_read32(wl, SCR_PAD2);
 
 	ret = wl1271_boot_write_irq_polarity(wl);
 	if (ret < 0)
 		goto out;
 
 	/* FIXME: Need to check whether this is really what we want */
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
 			   WL1271_ACX_ALL_EVENTS_VECTOR);
 
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
@@ -530,6 +543,9 @@
 	if (ret < 0)
 		goto out;
 
+	/* Enable firmware interrupts now */
+	wl1271_boot_enable_interrupts(wl);
+
 	/* set the wl1271 default filters */
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h
index b0d8fb4..412443e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -50,23 +50,17 @@
 #define WU_COUNTER_PAUSE_VAL 0x3FF
 #define WELP_ARM_COMMAND_VAL 0x4
 
-#define OCP_CMD_LOOP  32
-
-#define OCP_CMD_WRITE 0x1
-#define OCP_CMD_READ  0x2
-
-#define OCP_READY_MASK  BIT(18)
-#define OCP_STATUS_MASK (BIT(16) | BIT(17))
-
-#define OCP_STATUS_NO_RESP    0x00000
-#define OCP_STATUS_OK         0x10000
-#define OCP_STATUS_REQ_FAILED 0x20000
-#define OCP_STATUS_RESP_ERROR 0x30000
-
-#define OCP_REG_POLARITY 0x30032
+#define OCP_REG_POLARITY     0x0064
+#define OCP_REG_CLK_TYPE     0x0448
+#define OCP_REG_CLK_POLARITY 0x0cb2
 
 #define CMD_MBOX_ADDRESS 0x407B4
 
 #define POLARITY_LOW BIT(1)
 
+#define FREF_CLK_TYPE_BITS     0xfffffe7f
+#define CLK_REQ_PRCM           0x100
+#define FREF_CLK_POLARITY_BITS 0xfffff8ff
+#define CLK_REQ_OUTN_SEL       0x700
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 2a4351f..886a9bc 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -42,26 +42,28 @@
  * @buf: buffer containing the command, must work with dma
  * @len: length of the buffer
  */
-int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len)
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
+		    size_t res_len)
 {
 	struct wl1271_cmd_header *cmd;
 	unsigned long timeout;
 	u32 intr;
 	int ret = 0;
+	u16 status;
 
 	cmd = buf;
-	cmd->id = id;
+	cmd->id = cpu_to_le16(id);
 	cmd->status = 0;
 
 	WARN_ON(len % 4 != 0);
 
-	wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len);
+	wl1271_spi_write(wl, wl->cmd_box_addr, buf, len, false);
 
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
 
-	intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
@@ -71,17 +73,28 @@
 
 		msleep(1);
 
-		intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	}
 
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+	/* read back the status code of the command */
+	if (res_len == 0)
+		res_len = sizeof(struct wl1271_cmd_header);
+	wl1271_spi_read(wl, wl->cmd_box_addr, cmd, res_len, false);
+
+	status = le16_to_cpu(cmd->status);
+	if (status != CMD_STATUS_SUCCESS) {
+		wl1271_error("command execute failure %d", status);
+		ret = -EIO;
+	}
+
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
 			   WL1271_ACX_INTR_CMD_COMPLETE);
 
 out:
 	return ret;
 }
 
-int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
+static int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
 {
 	struct wl1271_cmd_cal_channel_tune *cmd;
 	int ret = 0;
@@ -104,7 +117,7 @@
 	return ret;
 }
 
-int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
+static int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
 {
 	struct wl1271_cmd_cal_update_ref_point *cmd;
 	int ret = 0;
@@ -129,7 +142,7 @@
 	return ret;
 }
 
-int wl1271_cmd_cal_p2g(struct wl1271 *wl)
+static int wl1271_cmd_cal_p2g(struct wl1271 *wl)
 {
 	struct wl1271_cmd_cal_p2g *cmd;
 	int ret = 0;
@@ -150,7 +163,7 @@
 	return ret;
 }
 
-int wl1271_cmd_cal(struct wl1271 *wl)
+static int wl1271_cmd_cal(struct wl1271 *wl)
 {
 	/*
 	 * FIXME: we must make sure that we're not sleeping when calibration
@@ -175,11 +188,116 @@
 	return ret;
 }
 
-int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
-		    u16 beacon_interval, u8 wait)
+int wl1271_cmd_general_parms(struct wl1271 *wl)
+{
+	struct wl1271_general_parms_cmd *gen_parms;
+	struct conf_general_parms *g = &wl->conf.init.genparam;
+	int ret;
+
+	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+	if (!gen_parms)
+		return -ENOMEM;
+
+	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+	gen_parms->ref_clk = g->ref_clk;
+	gen_parms->settling_time = g->settling_time;
+	gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
+	gen_parms->dc2dcmode = g->dc2dcmode;
+	gen_parms->single_dual_band = g->single_dual_band;
+	gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
+	gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
+	gen_parms->settings = g->settings;
+
+	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+
+	kfree(gen_parms);
+	return ret;
+}
+
+int wl1271_cmd_radio_parms(struct wl1271 *wl)
+{
+	struct wl1271_radio_parms_cmd *radio_parms;
+	struct conf_radio_parms *r = &wl->conf.init.radioparam;
+	int i, ret;
+
+	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+	if (!radio_parms)
+		return -ENOMEM;
+
+	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+	/* Static radio parameters */
+	radio_parms->rx_trace_loss = r->rx_trace_loss;
+	radio_parms->tx_trace_loss = r->tx_trace_loss;
+	memcpy(radio_parms->rx_rssi_and_proc_compens,
+	       r->rx_rssi_and_proc_compens,
+	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
+
+	memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->rx_rssi_and_proc_compens_5,
+	       r->rx_rssi_and_proc_compens_5,
+	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
+
+	/* Dynamic radio parameters */
+	radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
+	radio_parms->tx_ref_power = r->tx_ref_power;
+	radio_parms->tx_offset_db = r->tx_offset_db;
+
+	memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+
+	memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
+	       CONF_NUMBER_OF_CHANNELS_2_4);
+	memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
+	       CONF_NUMBER_OF_CHANNELS_2_4);
+	memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
+
+	radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
+
+	for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
+		radio_parms->tx_ref_pd_voltage_5[i] =
+			cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
+	memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_rate_limits_normal_5,
+	       r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_degraded_5,
+	       r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_channel_limits_ofdm_5,
+	       r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
+	memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->rx_fem_insertion_loss_5,
+	       r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+		    radio_parms, sizeof(*radio_parms));
+
+	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+	kfree(radio_parms);
+	return ret;
+}
+
+int wl1271_cmd_join(struct wl1271 *wl)
 {
 	static bool do_cal = true;
-	unsigned long timeout;
 	struct wl1271_cmd_join *join;
 	int ret, i;
 	u8 *bssid;
@@ -193,6 +311,18 @@
 			do_cal = false;
 	}
 
+	/* FIXME: This is a workaround, because with the current stack, we
+	 * cannot know when we have disassociated.  So, if we have already
+	 * joined, we disconnect before joining again. */
+	if (wl->joined) {
+		ret = wl1271_cmd_disconnect(wl);
+		if (ret < 0) {
+			wl1271_error("failed to disconnect before rejoining");
+			goto out;
+		}
+
+		wl->joined = false;
+	}
 
 	join = kzalloc(sizeof(*join), GFP_KERNEL);
 	if (!join) {
@@ -207,15 +337,34 @@
 	for (i = 0; i < ETH_ALEN; i++)
 		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
 
-	join->rx_config_options = wl->rx_config;
-	join->rx_filter_options = wl->rx_filter;
+	join->rx_config_options = cpu_to_le32(wl->rx_config);
+	join->rx_filter_options = cpu_to_le32(wl->rx_filter);
+	join->bss_type = wl->bss_type;
 
-	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
-		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+	/*
+	 * FIXME: disable temporarily all filters because after commit
+	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
+	 * association. The filter logic needs to be implemented properly
+	 * and once that is done, this hack can be removed.
+	 */
+	join->rx_config_options = cpu_to_le32(0);
+	join->rx_filter_options = cpu_to_le32(WL1271_DEFAULT_RX_FILTER);
 
-	join->beacon_interval = beacon_interval;
-	join->dtim_interval = dtim_interval;
-	join->bss_type = bss_type;
+	if (wl->band == IEEE80211_BAND_2GHZ)
+		join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_1MBPS   |
+						   CONF_HW_BIT_RATE_2MBPS   |
+						   CONF_HW_BIT_RATE_5_5MBPS |
+						   CONF_HW_BIT_RATE_11MBPS);
+	else {
+		join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ;
+		join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_6MBPS  |
+						   CONF_HW_BIT_RATE_12MBPS |
+						   CONF_HW_BIT_RATE_24MBPS);
+	}
+
+	join->beacon_interval = cpu_to_le16(WL1271_DEFAULT_BEACON_INT);
+	join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
+
 	join->channel = wl->channel;
 	join->ssid_len = wl->ssid_len;
 	memcpy(join->ssid, wl->ssid, wl->ssid_len);
@@ -228,21 +377,24 @@
 
 	join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
 
+	/* reset TX security counters */
+	wl->tx_security_last_seq = 0;
+	wl->tx_security_seq_16 = 0;
+	wl->tx_security_seq_32 = 0;
 
-	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
+	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0);
 	if (ret < 0) {
 		wl1271_error("failed to initiate cmd join");
 		goto out_free;
 	}
 
-	timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+	wl->joined = true;
 
 	/*
 	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
 	 * simplify locking we just sleep instead, for now
 	 */
-	if (wait)
-		msleep(10);
+	msleep(10);
 
 out_free:
 	kfree(join);
@@ -262,34 +414,21 @@
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
 {
 	int ret;
+	size_t res_len = 0;
 
 	wl1271_debug(DEBUG_CMD, "cmd test");
 
-	ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len);
+	if (answer)
+		res_len = buf_len;
+
+	ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len);
 
 	if (ret < 0) {
 		wl1271_warning("TEST command failed");
 		return ret;
 	}
 
-	if (answer) {
-		struct wl1271_command *cmd_answer;
-
-		/*
-		 * The test command got in, we can read the answer.
-		 * The answer would be a wl1271_command, where the
-		 * parameter array contains the actual answer.
-		 */
-		wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
-
-		cmd_answer = buf;
-
-		if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
-			wl1271_error("TEST command answer error: %d",
-				     cmd_answer->header.status);
-	}
-
-	return 0;
+	return ret;
 }
 
 /**
@@ -307,26 +446,15 @@
 
 	wl1271_debug(DEBUG_CMD, "cmd interrogate");
 
-	acx->id = id;
+	acx->id = cpu_to_le16(id);
 
 	/* payload length, does not include any headers */
-	acx->len = len - sizeof(*acx);
+	acx->len = cpu_to_le16(len - sizeof(*acx));
 
-	ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
-	if (ret < 0) {
+	ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx), len);
+	if (ret < 0)
 		wl1271_error("INTERROGATE command failed");
-		goto out;
-	}
 
-	/* the interrogate command got in, we can read the answer */
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len);
-
-	acx = buf;
-	if (acx->cmd.status != CMD_STATUS_SUCCESS)
-		wl1271_error("INTERROGATE command error: %d",
-			     acx->cmd.status);
-
-out:
 	return ret;
 }
 
@@ -345,12 +473,12 @@
 
 	wl1271_debug(DEBUG_CMD, "cmd configure");
 
-	acx->id = id;
+	acx->id = cpu_to_le16(id);
 
 	/* payload length, does not include any headers */
-	acx->len = len - sizeof(*acx);
+	acx->len = cpu_to_le16(len - sizeof(*acx));
 
-	ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len);
+	ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len, 0);
 	if (ret < 0) {
 		wl1271_warning("CONFIGURE command NOK");
 		return ret;
@@ -383,7 +511,7 @@
 		cmd_tx = CMD_DISABLE_TX;
 	}
 
-	ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("rx %s cmd for channel %d failed",
 			     enable ? "start" : "stop", channel);
@@ -393,7 +521,7 @@
 	wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
 		     enable ? "start" : "stop", channel);
 
-	ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_error("tx %s cmd for channel %d failed",
 			     enable ? "start" : "stop", channel);
@@ -414,8 +542,7 @@
 	int ret = 0;
 
 	/* FIXME: this should be in ps.c */
-	ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP,
-					    wl->listen_int);
+	ret = wl1271_acx_wake_up_conditions(wl);
 	if (ret < 0) {
 		wl1271_error("couldn't set wake up conditions");
 		goto out;
@@ -433,10 +560,10 @@
 	ps_params->send_null_data = 1;
 	ps_params->retries = 5;
 	ps_params->hang_over_period = 128;
-	ps_params->null_data_rate = 1; /* 1 Mbps */
+	ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
 
 	ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
-			      sizeof(*ps_params));
+			      sizeof(*ps_params), 0);
 	if (ret < 0) {
 		wl1271_error("cmd set_ps_mode failed");
 		goto out;
@@ -464,22 +591,17 @@
 	WARN_ON(len > MAX_READ_SIZE);
 	len = min_t(size_t, len, MAX_READ_SIZE);
 
-	cmd->addr = addr;
-	cmd->size = len;
+	cmd->addr = cpu_to_le32(addr);
+	cmd->size = cpu_to_le32(len);
 
-	ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd),
+			      sizeof(*cmd));
 	if (ret < 0) {
 		wl1271_error("read memory command failed: %d", ret);
 		goto out;
 	}
 
-	/* the read command got in, we can now read the answer */
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
-
-	if (cmd->header.status != CMD_STATUS_SUCCESS)
-		wl1271_error("error in read command result: %d",
-			     cmd->header.status);
-
+	/* the read command got in */
 	memcpy(answer, cmd->value, len);
 
 out:
@@ -488,14 +610,31 @@
 }
 
 int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
-		    u8 active_scan, u8 high_prio, u8 num_channels,
+		    u8 active_scan, u8 high_prio, u8 band,
 		    u8 probe_requests)
 {
 
 	struct wl1271_cmd_trigger_scan_to *trigger = NULL;
 	struct wl1271_cmd_scan *params = NULL;
-	int i, ret;
+	struct ieee80211_channel *channels;
+	int i, j, n_ch, ret;
 	u16 scan_options = 0;
+	u8 ieee_band;
+
+	if (band == WL1271_SCAN_BAND_2_4_GHZ)
+		ieee_band = IEEE80211_BAND_2GHZ;
+	else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled())
+		ieee_band = IEEE80211_BAND_2GHZ;
+	else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled())
+		ieee_band = IEEE80211_BAND_5GHZ;
+	else
+		return -EINVAL;
+
+	if (wl->hw->wiphy->bands[ieee_band]->channels == NULL)
+		return -EINVAL;
+
+	channels = wl->hw->wiphy->bands[ieee_band]->channels;
+	n_ch = wl->hw->wiphy->bands[ieee_band]->n_channels;
 
 	if (wl->scanning)
 		return -EINVAL;
@@ -512,32 +651,43 @@
 		scan_options |= WL1271_SCAN_OPT_PASSIVE;
 	if (high_prio)
 		scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH;
-	params->params.scan_options = scan_options;
+	params->params.scan_options = cpu_to_le16(scan_options);
 
-	params->params.num_channels = num_channels;
 	params->params.num_probe_requests = probe_requests;
-	params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS);
+	/* Let the fw autodetect suitable tx_rate for probes */
+	params->params.tx_rate = 0;
 	params->params.tid_trigger = 0;
 	params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
 
-	for (i = 0; i < num_channels; i++) {
-		params->channels[i].min_duration =
-			cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
-		params->channels[i].max_duration =
-			cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
-		memset(&params->channels[i].bssid_lsb, 0xff, 4);
-		memset(&params->channels[i].bssid_msb, 0xff, 2);
-		params->channels[i].early_termination = 0;
-		params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR;
-		params->channels[i].channel = i + 1;
+	if (band == WL1271_SCAN_BAND_DUAL)
+		params->params.band = WL1271_SCAN_BAND_2_4_GHZ;
+	else
+		params->params.band = band;
+
+	for (i = 0, j = 0; i < n_ch && i < WL1271_SCAN_MAX_CHANNELS; i++) {
+		if (!(channels[i].flags & IEEE80211_CHAN_DISABLED)) {
+			params->channels[j].min_duration =
+				cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
+			params->channels[j].max_duration =
+				cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
+			memset(&params->channels[j].bssid_lsb, 0xff, 4);
+			memset(&params->channels[j].bssid_msb, 0xff, 2);
+			params->channels[j].early_termination = 0;
+			params->channels[j].tx_power_att =
+				WL1271_SCAN_CURRENT_TX_PWR;
+			params->channels[j].channel = channels[i].hw_value;
+			j++;
+		}
 	}
 
+	params->params.num_channels = j;
+
 	if (len && ssid) {
 		params->params.ssid_len = len;
 		memcpy(params->params.ssid, ssid, len);
 	}
 
-	ret = wl1271_cmd_build_probe_req(wl, ssid, len);
+	ret = wl1271_cmd_build_probe_req(wl, ssid, len, ieee_band);
 	if (ret < 0) {
 		wl1271_error("PROBE request template failed");
 		goto out;
@@ -553,7 +703,7 @@
 	trigger->timeout = 0;
 
 	ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger,
-			      sizeof(*trigger));
+			      sizeof(*trigger), 0);
 	if (ret < 0) {
 		wl1271_error("trigger scan to failed for hw scan");
 		goto out;
@@ -562,20 +712,24 @@
 	wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
 
 	wl->scanning = true;
-
-	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
-	if (ret < 0) {
-		wl1271_error("SCAN failed");
-		goto out;
+	if (wl1271_11a_enabled()) {
+		wl->scan.state = band;
+		if (band == WL1271_SCAN_BAND_DUAL) {
+			wl->scan.active = active_scan;
+			wl->scan.high_prio = high_prio;
+			wl->scan.probe_requests = probe_requests;
+			if (len && ssid) {
+				wl->scan.ssid_len = len;
+				memcpy(wl->scan.ssid, ssid, len);
+			} else
+				wl->scan.ssid_len = 0;
+		}
 	}
 
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
-
-	if (params->header.status != CMD_STATUS_SUCCESS) {
-		wl1271_error("Scan command error: %d",
-			     params->header.status);
+	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params), 0);
+	if (ret < 0) {
+		wl1271_error("SCAN failed");
 		wl->scanning = false;
-		ret = -EIO;
 		goto out;
 	}
 
@@ -603,14 +757,14 @@
 
 	cmd->len = cpu_to_le16(buf_len);
 	cmd->template_type = template_id;
-	cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
-	cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT;
-	cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT;
+	cmd->enabled_rates = cpu_to_le32(wl->conf.tx.rc_conf.enabled_rates);
+	cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit;
+	cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit;
 
 	if (buf)
 		memcpy(cmd->template_data, buf, buf_len);
 
-	ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("cmd set_template failed: %d", ret);
 		goto out_free;
@@ -623,30 +777,62 @@
 	return ret;
 }
 
-static int wl1271_build_basic_rates(char *rates)
+static int wl1271_build_basic_rates(char *rates, u8 band)
 {
 	u8 index = 0;
 
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+	if (band == IEEE80211_BAND_2GHZ) {
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+	} else if (band == IEEE80211_BAND_5GHZ) {
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
+	} else {
+		wl1271_error("build_basic_rates invalid band: %d", band);
+	}
 
 	return index;
 }
 
-static int wl1271_build_extended_rates(char *rates)
+static int wl1271_build_extended_rates(char *rates, u8 band)
 {
 	u8 index = 0;
 
-	rates[index++] = IEEE80211_OFDM_RATE_6MB;
-	rates[index++] = IEEE80211_OFDM_RATE_9MB;
-	rates[index++] = IEEE80211_OFDM_RATE_12MB;
-	rates[index++] = IEEE80211_OFDM_RATE_18MB;
-	rates[index++] = IEEE80211_OFDM_RATE_24MB;
-	rates[index++] = IEEE80211_OFDM_RATE_36MB;
-	rates[index++] = IEEE80211_OFDM_RATE_48MB;
-	rates[index++] = IEEE80211_OFDM_RATE_54MB;
+	if (band == IEEE80211_BAND_2GHZ) {
+		rates[index++] = IEEE80211_OFDM_RATE_6MB;
+		rates[index++] = IEEE80211_OFDM_RATE_9MB;
+		rates[index++] = IEEE80211_OFDM_RATE_12MB;
+		rates[index++] = IEEE80211_OFDM_RATE_18MB;
+		rates[index++] = IEEE80211_OFDM_RATE_24MB;
+		rates[index++] = IEEE80211_OFDM_RATE_36MB;
+		rates[index++] = IEEE80211_OFDM_RATE_48MB;
+		rates[index++] = IEEE80211_OFDM_RATE_54MB;
+	} else if (band == IEEE80211_BAND_5GHZ) {
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
+	} else {
+		wl1271_error("build_basic_rates invalid band: %d", band);
+	}
 
 	return index;
 }
@@ -665,7 +851,8 @@
 
 	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
 	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
-						IEEE80211_STYPE_NULLFUNC);
+						IEEE80211_STYPE_NULLFUNC |
+						IEEE80211_FCTL_TODS);
 
 	return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template,
 				       sizeof(template));
@@ -678,7 +865,10 @@
 
 	memcpy(template.bssid, wl->bssid, ETH_ALEN);
 	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
-	template.aid = aid;
+
+	/* aid in PS-Poll has its two MSBs each set to 1 */
+	template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid);
+
 	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
 
 	return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template,
@@ -686,12 +876,14 @@
 
 }
 
-int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len)
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
+			       u8 band)
 {
 	struct wl12xx_probe_req_template template;
 	struct wl12xx_ie_rates *rates;
 	char *ptr;
 	u16 size;
+	int ret;
 
 	ptr = (char *)&template;
 	size = sizeof(struct ieee80211_header);
@@ -713,20 +905,25 @@
 	/* Basic Rates */
 	rates = (struct wl12xx_ie_rates *)ptr;
 	rates->header.id = WLAN_EID_SUPP_RATES;
-	rates->header.len = wl1271_build_basic_rates(rates->rates);
+	rates->header.len = wl1271_build_basic_rates(rates->rates, band);
 	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
 	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
 
 	/* Extended rates */
 	rates = (struct wl12xx_ie_rates *)ptr;
 	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
-	rates->header.len = wl1271_build_extended_rates(rates->rates);
+	rates->header.len = wl1271_build_extended_rates(rates->rates, band);
 	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
 
 	wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
 
-	return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
-				       &template, size);
+	if (band == IEEE80211_BAND_2GHZ)
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+					      &template, size);
+	else
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
+					      &template, size);
+	return ret;
 }
 
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
@@ -743,10 +940,10 @@
 	}
 
 	cmd->id = id;
-	cmd->key_action = KEY_SET_ID;
+	cmd->key_action = cpu_to_le16(KEY_SET_ID);
 	cmd->key_type = KEY_WEP;
 
-	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("cmd set_default_wep_key failed: %d", ret);
 		goto out;
@@ -759,7 +956,8 @@
 }
 
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
-		       u8 key_size, const u8 *key, const u8 *addr)
+		       u8 key_size, const u8 *key, const u8 *addr,
+		       u32 tx_seq_32, u16 tx_seq_16)
 {
 	struct wl1271_cmd_set_keys *cmd;
 	int ret = 0;
@@ -773,16 +971,18 @@
 	if (key_type != KEY_WEP)
 		memcpy(cmd->addr, addr, ETH_ALEN);
 
-	cmd->key_action = action;
+	cmd->key_action = cpu_to_le16(action);
 	cmd->key_size = key_size;
 	cmd->key_type = key_type;
 
+	cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16);
+	cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32);
+
 	/* we have only one SSID profile */
 	cmd->ssid_profile = 0;
 
 	cmd->id = id;
 
-	/* FIXME: this is from wl1251, needs to be checked */
 	if (key_type == KEY_TKIP) {
 		/*
 		 * We get the key in the following form:
@@ -800,7 +1000,7 @@
 
 	wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
 
-	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
+	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
 	if (ret < 0) {
 		wl1271_warning("could not set keys");
 		goto out;
@@ -811,3 +1011,34 @@
 
 	return ret;
 }
+
+int wl1271_cmd_disconnect(struct wl1271 *wl)
+{
+	struct wl1271_cmd_disconnect *cmd;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd disconnect");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->rx_config_options = cpu_to_le32(wl->rx_config);
+	cmd->rx_filter_options = cpu_to_le32(wl->rx_filter);
+	/* disconnect reason is not used in immediate disconnections */
+	cmd->type = DISCONNECT_IMMEDIATE;
+
+	ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd), 0);
+	if (ret < 0) {
+		wl1271_error("failed to send disconnect command");
+		goto out_free;
+	}
+
+out_free:
+	kfree(cmd);
+
+out:
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 951a844..b4fa4ac 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -29,9 +29,11 @@
 
 struct acx_header;
 
-int wl1271_cmd_send(struct wl1271 *wl, u16 type, void *buf, size_t buf_len);
-int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
-		    u16 beacon_interval, u8 wait);
+int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
+		    size_t res_len);
+int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl1271_cmd_radio_parms(struct wl1271 *wl);
+int wl1271_cmd_join(struct wl1271 *wl);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
 int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
@@ -40,16 +42,19 @@
 int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
 			   size_t len);
 int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
-		    u8 active_scan, u8 high_prio, u8 num_channels,
+		    u8 active_scan, u8 high_prio, u8 band,
 		    u8 probe_requests);
 int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
 			    void *buf, size_t buf_len);
 int wl1271_cmd_build_null_data(struct wl1271 *wl);
 int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
-int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len);
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
+			       u8 band);
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
-		       u8 key_size, const u8 *key, const u8 *addr);
+		       u8 key_size, const u8 *key, const u8 *addr,
+		       u32 tx_seq_32, u16 tx_seq_16);
+int wl1271_cmd_disconnect(struct wl1271 *wl);
 
 enum wl1271_commands {
 	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
@@ -118,8 +123,8 @@
 #define WL1271_CMD_TEMPL_MAX_SIZE  252
 
 struct wl1271_cmd_header {
-	u16 id;
-	u16 status;
+	__le16 id;
+	__le16 status;
 	/* payload */
 	u8 data[0];
 } __attribute__ ((packed));
@@ -172,17 +177,17 @@
 	struct wl1271_cmd_header header;
 
 	/* The address of the memory to read from or write to.*/
-	u32 addr;
+	__le32 addr;
 
 	/* The amount of data in bytes to read from or write to the WiLink
 	 * device.*/
-	u32 size;
+	__le32 size;
 
 	/* The actual value read from or written to the Wilink. The source
 	   of this field is the Host in WRITE command or the Wilink in READ
 	   command. */
 	u8 value[MAX_READ_SIZE];
-};
+} __attribute__ ((packed));
 
 #define CMDMBOX_HEADER_LEN 4
 #define CMDMBOX_INFO_ELEM_HEADER_LEN 4
@@ -196,22 +201,23 @@
 
 #define WL1271_JOIN_CMD_CTRL_TX_FLUSH     0x80 /* Firmware flushes all Tx */
 #define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1
+#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10
 
 struct wl1271_cmd_join {
 	struct wl1271_cmd_header header;
 
-	u32 bssid_lsb;
-	u16 bssid_msb;
-	u16 beacon_interval; /* in TBTTs */
-	u32 rx_config_options;
-	u32 rx_filter_options;
+	__le32 bssid_lsb;
+	__le16 bssid_msb;
+	__le16 beacon_interval; /* in TBTTs */
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
 
 	/*
 	 * The target uses this field to determine the rate at
 	 * which to transmit control frame responses (such as
 	 * ACK or CTS frames).
 	 */
-	u32 basic_rate_set;
+	__le32 basic_rate_set;
 	u8 dtim_interval;
 	/*
 	 * bits 0-2: This bitwise field specifies the type
@@ -240,10 +246,10 @@
 struct wl1271_cmd_template_set {
 	struct wl1271_cmd_header header;
 
-	u16 len;
+	__le16 len;
 	u8 template_type;
 	u8 index;  /* relevant only for KLV_TEMPLATE type */
-	u32 enabled_rates;
+	__le32 enabled_rates;
 	u8 short_retry_limit;
 	u8 long_retry_limit;
 	u8 aflags;
@@ -280,18 +286,13 @@
 	  * to power save mode.
 	  */
 	u8 hang_over_period;
-	u32 null_data_rate;
+	__le32 null_data_rate;
 } __attribute__ ((packed));
 
 /* HW encryption keys */
 #define NUM_ACCESS_CATEGORIES_COPY 4
 #define MAX_KEY_SIZE 32
 
-/* When set, disable HW encryption */
-#define DF_ENCRYPTION_DISABLE      0x01
-/* When set, disable HW decryption */
-#define DF_SNIFF_MODE_ENABLE       0x80
-
 enum wl1271_cmd_key_action {
 	KEY_ADD_OR_REPLACE = 1,
 	KEY_REMOVE         = 2,
@@ -316,9 +317,9 @@
 	u8 addr[ETH_ALEN];
 
 	/* key_action_e */
-	u16 key_action;
+	__le16 key_action;
 
-	u16 reserved_1;
+	__le16 reserved_1;
 
 	/* key size in bytes */
 	u8 key_size;
@@ -334,8 +335,8 @@
 	u8 id;
 	u8 reserved_2[6];
 	u8 key[MAX_KEY_SIZE];
-	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
-	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+	__le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+	__le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
 } __attribute__ ((packed));
 
 
@@ -347,19 +348,22 @@
 #define WL1271_SCAN_OPT_PRIORITY_HIGH  4
 #define WL1271_SCAN_CHAN_MIN_DURATION  30000  /* TU */
 #define WL1271_SCAN_CHAN_MAX_DURATION  60000  /* TU */
+#define WL1271_SCAN_BAND_2_4_GHZ 0
+#define WL1271_SCAN_BAND_5_GHZ 1
+#define WL1271_SCAN_BAND_DUAL 2
 
 struct basic_scan_params {
-	u32 rx_config_options;
-	u32 rx_filter_options;
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
 	/* Scan option flags (WL1271_SCAN_OPT_*) */
-	u16 scan_options;
+	__le16 scan_options;
 	/* Number of scan channels in the list (maximum 30) */
 	u8 num_channels;
 	/* This field indicates the number of probe requests to send
 	   per channel for an active scan */
 	u8 num_probe_requests;
 	/* Rate bit field for sending the probes */
-	u32 tx_rate;
+	__le32 tx_rate;
 	u8 tid_trigger;
 	u8 ssid_len;
 	/* in order to align */
@@ -374,10 +378,10 @@
 
 struct basic_scan_channel_params {
 	/* Duration in TU to wait for frames on a channel for active scan */
-	u32 min_duration;
-	u32 max_duration;
-	u32 bssid_lsb;
-	u16 bssid_msb;
+	__le32 min_duration;
+	__le32 max_duration;
+	__le32 bssid_lsb;
+	__le16 bssid_msb;
 	u8 early_termination;
 	u8 tx_power_att;
 	u8 channel;
@@ -397,13 +401,13 @@
 struct wl1271_cmd_trigger_scan_to {
 	struct wl1271_cmd_header header;
 
-	u32 timeout;
-};
+	__le32 timeout;
+} __attribute__ ((packed));
 
 struct wl1271_cmd_test_header {
 	u8 id;
 	u8 padding[3];
-};
+} __attribute__ ((packed));
 
 enum wl1271_channel_tune_bands {
 	WL1271_CHANNEL_TUNE_BAND_2_4,
@@ -416,6 +420,76 @@
 #define TEST_CMD_P2G_CAL                   0x02
 #define TEST_CMD_CHANNEL_TUNE              0x0d
 #define TEST_CMD_UPDATE_PD_REFERENCE_POINT 0x1d
+#define TEST_CMD_INI_FILE_RADIO_PARAM      0x19
+#define TEST_CMD_INI_FILE_GENERAL_PARAM    0x1E
+
+struct wl1271_general_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	u8 ref_clk;
+	u8 settling_time;
+	u8 clk_valid_on_wakeup;
+	u8 dc2dcmode;
+	u8 single_dual_band;
+
+	u8 tx_bip_fem_autodetect;
+	u8 tx_bip_fem_manufacturer;
+	u8 settings;
+} __attribute__ ((packed));
+
+struct wl1271_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	/* Static radio parameters */
+	/* 2.4GHz */
+	u8 rx_trace_loss;
+	u8 tx_trace_loss;
+	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/* 5GHz */
+	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/* Dynamic radio parameters */
+	/* 2.4GHz */
+	__le16 tx_ref_pd_voltage;
+	s8  tx_ref_power;
+	s8  tx_offset_db;
+
+	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
+
+	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
+	u8  rx_fem_insertion_loss;
+
+	u8 padding2;
+
+	/* 5GHz */
+	__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	/* FIXME: this is inconsistent with the types for 2.4GHz */
+	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	u8 padding3[2];
+} __attribute__ ((packed));
 
 struct wl1271_cmd_cal_channel_tune {
 	struct wl1271_cmd_header header;
@@ -425,7 +499,7 @@
 	u8 band;
 	u8 channel;
 
-	u16 radio_status;
+	__le16 radio_status;
 } __attribute__ ((packed));
 
 struct wl1271_cmd_cal_update_ref_point {
@@ -433,8 +507,8 @@
 
 	struct wl1271_cmd_test_header test;
 
-	s32 ref_power;
-	s32 ref_detector;
+	__le32 ref_power;
+	__le32 ref_detector;
 	u8  sub_band;
 	u8  padding[3];
 } __attribute__ ((packed));
@@ -449,16 +523,42 @@
 
 	struct wl1271_cmd_test_header test;
 
-	u16 len;
+	__le16 len;
 	u8  buf[MAX_TLV_LENGTH];
 	u8  type;
 	u8  padding;
 
-	s16 radio_status;
+	__le16 radio_status;
 	u8  nvs_version[MAX_NVS_VERSION_LENGTH];
 
 	u8  sub_band_mask;
 	u8  padding2;
 } __attribute__ ((packed));
 
+
+/*
+ * There are three types of disconnections:
+ *
+ * DISCONNECT_IMMEDIATE: the fw doesn't send any frames
+ * DISCONNECT_DEAUTH:    the fw generates a DEAUTH request with the reason
+ *                       we have passed
+ * DISCONNECT_DISASSOC:  the fw generates a DESASSOC request with the reason
+ *                       we have passed
+ */
+enum wl1271_disconnect_type {
+	DISCONNECT_IMMEDIATE,
+	DISCONNECT_DEAUTH,
+	DISCONNECT_DISASSOC
+};
+
+struct wl1271_cmd_disconnect {
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
+
+	__le16 reason;
+	u8  type;
+
+	u8  padding;
+} __attribute__ ((packed));
+
 #endif /* __WL1271_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
new file mode 100644
index 0000000..565373e
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -0,0 +1,919 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_CONF_H__
+#define __WL1271_CONF_H__
+
+enum {
+	CONF_HW_BIT_RATE_1MBPS   = BIT(0),
+	CONF_HW_BIT_RATE_2MBPS   = BIT(1),
+	CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
+	CONF_HW_BIT_RATE_6MBPS   = BIT(3),
+	CONF_HW_BIT_RATE_9MBPS   = BIT(4),
+	CONF_HW_BIT_RATE_11MBPS  = BIT(5),
+	CONF_HW_BIT_RATE_12MBPS  = BIT(6),
+	CONF_HW_BIT_RATE_18MBPS  = BIT(7),
+	CONF_HW_BIT_RATE_22MBPS  = BIT(8),
+	CONF_HW_BIT_RATE_24MBPS  = BIT(9),
+	CONF_HW_BIT_RATE_36MBPS  = BIT(10),
+	CONF_HW_BIT_RATE_48MBPS  = BIT(11),
+	CONF_HW_BIT_RATE_54MBPS  = BIT(12),
+	CONF_HW_BIT_RATE_MCS_0   = BIT(13),
+	CONF_HW_BIT_RATE_MCS_1   = BIT(14),
+	CONF_HW_BIT_RATE_MCS_2   = BIT(15),
+	CONF_HW_BIT_RATE_MCS_3   = BIT(16),
+	CONF_HW_BIT_RATE_MCS_4   = BIT(17),
+	CONF_HW_BIT_RATE_MCS_5   = BIT(18),
+	CONF_HW_BIT_RATE_MCS_6   = BIT(19),
+	CONF_HW_BIT_RATE_MCS_7   = BIT(20)
+};
+
+enum {
+	CONF_HW_RATE_INDEX_1MBPS   = 0,
+	CONF_HW_RATE_INDEX_2MBPS   = 1,
+	CONF_HW_RATE_INDEX_5_5MBPS = 2,
+	CONF_HW_RATE_INDEX_6MBPS   = 3,
+	CONF_HW_RATE_INDEX_9MBPS   = 4,
+	CONF_HW_RATE_INDEX_11MBPS  = 5,
+	CONF_HW_RATE_INDEX_12MBPS  = 6,
+	CONF_HW_RATE_INDEX_18MBPS  = 7,
+	CONF_HW_RATE_INDEX_22MBPS  = 8,
+	CONF_HW_RATE_INDEX_24MBPS  = 9,
+	CONF_HW_RATE_INDEX_36MBPS  = 10,
+	CONF_HW_RATE_INDEX_48MBPS  = 11,
+	CONF_HW_RATE_INDEX_54MBPS  = 12,
+	CONF_HW_RATE_INDEX_MAX     = CONF_HW_RATE_INDEX_54MBPS,
+};
+
+struct conf_sg_settings {
+	/*
+	 * Defines the PER threshold in PPM of the BT voice of which reaching
+	 * this value will trigger raising the priority of the BT voice by
+	 * the BT IP until next NFS sample interval time as defined in
+	 * nfs_sample_interval.
+	 *
+	 * Unit: PER value in PPM (parts per million)
+	 * #Error_packets / #Total_packets
+
+	 * Range: u32
+	 */
+	u32 per_threshold;
+
+	/*
+	 * This value is an absolute time in micro-seconds to limit the
+	 * maximum scan duration compensation while in SG
+	 */
+	u32 max_scan_compensation_time;
+
+	/* Defines the PER threshold of the BT voice of which reaching this
+	 * value will trigger raising the priority of the BT voice until next
+	 * NFS sample interval time as defined in sample_interval.
+	 *
+	 * Unit: msec
+	 * Range: 1-65000
+	 */
+	u16 nfs_sample_interval;
+
+	/*
+	 * Defines the load ratio for the BT.
+	 * The WLAN ratio is: 100 - load_ratio
+	 *
+	 * Unit: Percent
+	 * Range: 0-100
+	 */
+	u8 load_ratio;
+
+	/*
+	 * true - Co-ex is allowed to enter/exit P.S automatically and
+	 *        transparently to the host
+	 *
+	 * false - Co-ex is disallowed to enter/exit P.S and will trigger an
+	 *         event to the host to notify for the need to enter/exit P.S
+	 *         due to BT change state
+	 *
+	 */
+	u8 auto_ps_mode;
+
+	/*
+	 * This parameter defines the compensation percentage of num of probe
+	 * requests in case scan is initiated during BT voice/BT ACL
+	 * guaranteed link.
+	 *
+	 * Unit: Percent
+	 * Range: 0-255 (0 - No compensation)
+	 */
+	u8 probe_req_compensation;
+
+	/*
+	 * This parameter defines the compensation percentage of scan window
+	 * size in case scan is initiated during BT voice/BT ACL Guaranteed
+	 * link.
+	 *
+	 * Unit: Percent
+	 * Range: 0-255 (0 - No compensation)
+	 */
+	u8 scan_window_compensation;
+
+	/*
+	 * Defines the antenna configuration.
+	 *
+	 * Range: 0 - Single Antenna; 1 - Dual Antenna
+	 */
+	u8 antenna_config;
+
+	/*
+	 * The percent out of the Max consecutive beacon miss roaming trigger
+	 * which is the threshold for raising the priority of beacon
+	 * reception.
+	 *
+	 * Range: 1-100
+	 * N = MaxConsecutiveBeaconMiss
+	 * P = coexMaxConsecutiveBeaconMissPrecent
+	 * Threshold = MIN( N-1, round(N * P / 100))
+	 */
+	u8 beacon_miss_threshold;
+
+	/*
+	 * The RX rate threshold below which rate adaptation is assumed to be
+	 * occurring at the AP which will raise priority for ACTIVE_RX and RX
+	 * SP.
+	 *
+	 * Range: HW_BIT_RATE_*
+	 */
+	u32 rate_adaptation_threshold;
+
+	/*
+	 * The SNR above which the RX rate threshold indicating AP rate
+	 * adaptation is valid
+	 *
+	 * Range: -128 - 127
+	 */
+	s8 rate_adaptation_snr;
+};
+
+enum conf_rx_queue_type {
+	CONF_RX_QUEUE_TYPE_LOW_PRIORITY,  /* All except the high priority */
+	CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
+};
+
+struct conf_rx_settings {
+	/*
+	 * The maximum amount of time, in TU, before the
+	 * firmware discards the MSDU.
+	 *
+	 * Range: 0 - 0xFFFFFFFF
+	 */
+	u32 rx_msdu_life_time;
+
+	/*
+	 * Packet detection threshold in the PHY.
+	 *
+	 * FIXME: details unknown.
+	 */
+	u32 packet_detection_threshold;
+
+	/*
+	 * The longest time the STA will wait to receive traffic from the AP
+	 * after a PS-poll has been transmitted.
+	 *
+	 * Range: 0 - 200000
+	 */
+	u16 ps_poll_timeout;
+	/*
+	 * The longest time the STA will wait to receive traffic from the AP
+	 * after a frame has been sent from an UPSD enabled queue.
+	 *
+	 * Range: 0 - 200000
+	 */
+	u16 upsd_timeout;
+
+	/*
+	 * The number of octets in an MPDU, below which an RTS/CTS
+	 * handshake is not performed.
+	 *
+	 * Range: 0 - 4096
+	 */
+	u16 rts_threshold;
+
+	/*
+	 * The RX Clear Channel Assessment threshold in the PHY
+	 * (the energy threshold).
+	 *
+	 * Range: ENABLE_ENERGY_D  == 0x140A
+	 *        DISABLE_ENERGY_D == 0xFFEF
+	 */
+	u16 rx_cca_threshold;
+
+	/*
+	 * Occupied Rx mem-blocks number which requires interrupting the host
+	 * (0 = no buffering, 0xffff = disabled).
+	 *
+	 * Range: u16
+	 */
+	u16 irq_blk_threshold;
+
+	/*
+	 * Rx packets number which requires interrupting the host
+	 * (0 = no buffering).
+	 *
+	 * Range: u16
+	 */
+	u16 irq_pkt_threshold;
+
+	/*
+	 * Max time in msec the FW may delay RX-Complete interrupt.
+	 *
+	 * Range: 1 - 100
+	 */
+	u16 irq_timeout;
+
+	/*
+	 * The RX queue type.
+	 *
+	 * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
+	 */
+	u8 queue_type;
+};
+
+#define CONF_TX_MAX_RATE_CLASSES       8
+
+#define CONF_TX_RATE_MASK_UNSPECIFIED  0
+#define CONF_TX_RATE_MASK_ALL          0x1eff
+#define CONF_TX_RATE_RETRY_LIMIT       10
+
+struct conf_tx_rate_class {
+
+	/*
+	 * The rates enabled for this rate class.
+	 *
+	 * Range: CONF_HW_BIT_RATE_* bit mask
+	 */
+	u32 enabled_rates;
+
+	/*
+	 * The dot11 short retry limit used for TX retries.
+	 *
+	 * Range: u8
+	 */
+	u8 short_retry_limit;
+
+	/*
+	 * The dot11 long retry limit used for TX retries.
+	 *
+	 * Range: u8
+	 */
+	u8 long_retry_limit;
+
+	/*
+	 * Flags controlling the attributes of TX transmission.
+	 *
+	 * Range: bit 0: Truncate - when set, FW attempts to send a frame stop
+	 *               when the total valid per-rate attempts have
+	 *               been exhausted; otherwise transmissions
+	 *               will continue at the lowest available rate
+	 *               until the appropriate one of the
+	 *               short_retry_limit, long_retry_limit,
+	 *               dot11_max_transmit_msdu_life_time, or
+	 *               max_tx_life_time, is exhausted.
+	 *            1: Preamble Override - indicates if the preamble type
+	 *               should be used in TX.
+	 *            2: Preamble Type - the type of the preamble to be used by
+	 *               the policy (0 - long preamble, 1 - short preamble.
+	 */
+	u8 aflags;
+};
+
+#define CONF_TX_MAX_AC_COUNT 4
+
+/* Slot number setting to start transmission at PIFS interval */
+#define CONF_TX_AIFS_PIFS 1
+/* Slot number setting to start transmission at DIFS interval normal
+ * DCF access */
+#define CONF_TX_AIFS_DIFS 2
+
+
+enum conf_tx_ac {
+	CONF_TX_AC_BE = 0,         /* best effort / legacy */
+	CONF_TX_AC_BK = 1,         /* background */
+	CONF_TX_AC_VI = 2,         /* video */
+	CONF_TX_AC_VO = 3,         /* voice */
+	CONF_TX_AC_CTS2SELF = 4,   /* fictious AC, follows AC_VO */
+	CONF_TX_AC_ANY_TID = 0x1f
+};
+
+struct conf_tx_ac_category {
+	/*
+	 * The AC class identifier.
+	 *
+	 * Range: enum conf_tx_ac
+	 */
+	u8 ac;
+
+	/*
+	 * The contention window minimum size (in slots) for the access
+	 * class.
+	 *
+	 * Range: u8
+	 */
+	u8 cw_min;
+
+	/*
+	 * The contention window maximum size (in slots) for the access
+	 * class.
+	 *
+	 * Range: u8
+	 */
+	u16 cw_max;
+
+	/*
+	 * The AIF value (in slots) for the access class.
+	 *
+	 * Range: u8
+	 */
+	u8 aifsn;
+
+	/*
+	 * The TX Op Limit (in microseconds) for the access class.
+	 *
+	 * Range: u16
+	 */
+	u16 tx_op_limit;
+};
+
+#define CONF_TX_MAX_TID_COUNT 7
+
+enum {
+	CONF_CHANNEL_TYPE_DCF = 0,   /* DC/LEGACY*/
+	CONF_CHANNEL_TYPE_EDCF = 1,  /* EDCA*/
+	CONF_CHANNEL_TYPE_HCCA = 2,  /* HCCA*/
+};
+
+enum {
+	CONF_PS_SCHEME_LEGACY = 0,
+	CONF_PS_SCHEME_UPSD_TRIGGER = 1,
+	CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
+	CONF_PS_SCHEME_SAPSD = 3,
+};
+
+enum {
+	CONF_ACK_POLICY_LEGACY = 0,
+	CONF_ACK_POLICY_NO_ACK = 1,
+	CONF_ACK_POLICY_BLOCK = 2,
+};
+
+
+struct conf_tx_tid {
+	u8 queue_id;
+	u8 channel_type;
+	u8 tsid;
+	u8 ps_scheme;
+	u8 ack_policy;
+	u32 apsd_conf[2];
+};
+
+struct conf_tx_settings {
+	/*
+	 * The TX ED value for TELEC Enable/Disable.
+	 *
+	 * Range: 0, 1
+	 */
+	u8 tx_energy_detection;
+
+	/*
+	 * Configuration for rate classes for TX (currently only one
+	 * rate class supported.)
+	 */
+	struct conf_tx_rate_class rc_conf;
+
+	/*
+	 * Configuration for access categories for TX rate control.
+	 */
+	u8 ac_conf_count;
+	struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
+
+	/*
+	 * Configuration for TID parameters.
+	 */
+	u8 tid_conf_count;
+	struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
+
+	/*
+	 * The TX fragmentation threshold.
+	 *
+	 * Range: u16
+	 */
+	u16 frag_threshold;
+
+	/*
+	 * Max time in msec the FW may delay frame TX-Complete interrupt.
+	 *
+	 * Range: u16
+	 */
+	u16 tx_compl_timeout;
+
+	/*
+	 * Completed TX packet count which requires to issue the TX-Complete
+	 * interrupt.
+	 *
+	 * Range: u16
+	 */
+	u16 tx_compl_threshold;
+
+};
+
+enum {
+	CONF_WAKE_UP_EVENT_BEACON    = 0x01, /* Wake on every Beacon*/
+	CONF_WAKE_UP_EVENT_DTIM      = 0x02, /* Wake on every DTIM*/
+	CONF_WAKE_UP_EVENT_N_DTIM    = 0x04, /* Wake every Nth DTIM */
+	CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */
+	CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F
+};
+
+#define CONF_MAX_BCN_FILT_IE_COUNT 32
+
+#define CONF_BCN_RULE_PASS_ON_CHANGE         BIT(0)
+#define CONF_BCN_RULE_PASS_ON_APPEARANCE     BIT(1)
+
+#define CONF_BCN_IE_OUI_LEN    3
+#define CONF_BCN_IE_VER_LEN    2
+
+struct conf_bcn_filt_rule {
+	/*
+	 * IE number to which to associate a rule.
+	 *
+	 * Range: u8
+	 */
+	u8 ie;
+
+	/*
+	 * Rule to associate with the specific ie.
+	 *
+	 * Range: CONF_BCN_RULE_PASS_ON_*
+	 */
+	u8 rule;
+
+	/*
+	 * OUI for the vendor specifie IE (221)
+	 */
+	u8 oui[CONF_BCN_IE_OUI_LEN];
+
+	/*
+	 * Type for the vendor specifie IE (221)
+	 */
+	u8 type;
+
+	/*
+	 * Version for the vendor specifie IE (221)
+	 */
+	u8 version[CONF_BCN_IE_VER_LEN];
+};
+
+#define CONF_MAX_RSSI_SNR_TRIGGERS 8
+
+enum {
+	CONF_TRIG_METRIC_RSSI_BEACON = 0,
+	CONF_TRIG_METRIC_RSSI_DATA,
+	CONF_TRIG_METRIC_SNR_BEACON,
+	CONF_TRIG_METRIC_SNR_DATA
+};
+
+enum {
+	CONF_TRIG_EVENT_TYPE_LEVEL = 0,
+	CONF_TRIG_EVENT_TYPE_EDGE
+};
+
+enum {
+	CONF_TRIG_EVENT_DIR_LOW = 0,
+	CONF_TRIG_EVENT_DIR_HIGH,
+	CONF_TRIG_EVENT_DIR_BIDIR
+};
+
+
+struct conf_sig_trigger {
+	/*
+	 * The RSSI / SNR threshold value.
+	 *
+	 * FIXME: what is the range?
+	 */
+	s16 threshold;
+
+	/*
+	 * Minimum delay between two trigger events for this trigger in ms.
+	 *
+	 * Range: 0 - 60000
+	 */
+	u16 pacing;
+
+	/*
+	 * The measurement data source for this trigger.
+	 *
+	 * Range: CONF_TRIG_METRIC_*
+	 */
+	u8 metric;
+
+	/*
+	 * The trigger type of this trigger.
+	 *
+	 * Range: CONF_TRIG_EVENT_TYPE_*
+	 */
+	u8 type;
+
+	/*
+	 * The direction of the trigger.
+	 *
+	 * Range: CONF_TRIG_EVENT_DIR_*
+	 */
+	u8 direction;
+
+	/*
+	 * Hysteresis range of the trigger around the threshold (in dB)
+	 *
+	 * Range: u8
+	 */
+	u8 hysteresis;
+
+	/*
+	 * Index of the trigger rule.
+	 *
+	 * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1
+	 */
+	u8 index;
+
+	/*
+	 * Enable / disable this rule (to use for clearing rules.)
+	 *
+	 * Range: 1 - Enabled, 2 - Not enabled
+	 */
+	u8 enable;
+};
+
+struct conf_sig_weights {
+
+	/*
+	 * RSSI from beacons average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 rssi_bcn_avg_weight;
+
+	/*
+	 * RSSI from data average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 rssi_pkt_avg_weight;
+
+	/*
+	 * SNR from beacons average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 snr_bcn_avg_weight;
+
+	/*
+	 * SNR from data average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 snr_pkt_avg_weight;
+};
+
+enum conf_bcn_filt_mode {
+	CONF_BCN_FILT_MODE_DISABLED = 0,
+	CONF_BCN_FILT_MODE_ENABLED = 1
+};
+
+enum conf_bet_mode {
+	CONF_BET_MODE_DISABLE = 0,
+	CONF_BET_MODE_ENABLE = 1,
+};
+
+struct conf_conn_settings {
+	/*
+	 * Firmware wakeup conditions configuration. The host may set only
+	 * one bit.
+	 *
+	 * Range: CONF_WAKE_UP_EVENT_*
+	 */
+	u8 wake_up_event;
+
+	/*
+	 * Listen interval for beacons or Dtims.
+	 *
+	 * Range: 0 for beacon and Dtim wakeup
+	 *        1-10 for x Dtims
+	 *        1-255 for x beacons
+	 */
+	u8 listen_interval;
+
+	/*
+	 * Enable or disable the beacon filtering.
+	 *
+	 * Range: CONF_BCN_FILT_MODE_*
+	 */
+	enum conf_bcn_filt_mode bcn_filt_mode;
+
+	/*
+	 * Configure Beacon filter pass-thru rules.
+	 */
+	u8 bcn_filt_ie_count;
+	struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
+
+	/*
+	 * The number of consequtive beacons to lose, before the firmware
+	 * becomes out of synch.
+	 *
+	 * Range: u32
+	 */
+	u32 synch_fail_thold;
+
+	/*
+	 * After out-of-synch, the number of TU's to wait without a further
+	 * received beacon (or probe response) before issuing the BSS_EVENT_LOSE
+	 * event.
+	 *
+	 * Range: u32
+	 */
+	u32 bss_lose_timeout;
+
+	/*
+	 * Beacon receive timeout.
+	 *
+	 * Range: u32
+	 */
+	u32 beacon_rx_timeout;
+
+	/*
+	 * Broadcast receive timeout.
+	 *
+	 * Range: u32
+	 */
+	u32 broadcast_timeout;
+
+	/*
+	 * Enable/disable reception of broadcast packets in power save mode
+	 *
+	 * Range: 1 - enable, 0 - disable
+	 */
+	u8 rx_broadcast_in_ps;
+
+	/*
+	 * Consequtive PS Poll failures before sending event to driver
+	 *
+	 * Range: u8
+	 */
+	u8 ps_poll_threshold;
+
+	/*
+	 * Configuration of signal (rssi/snr) triggers.
+	 */
+	u8 sig_trigger_count;
+	struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS];
+
+	/*
+	 * Configuration of signal average weights.
+	 */
+	struct conf_sig_weights sig_weights;
+
+	/*
+	 * Specifies if beacon early termination procedure is enabled or
+	 * disabled.
+	 *
+	 * Range: CONF_BET_MODE_*
+	 */
+	u8 bet_enable;
+
+	/*
+	 * Specifies the maximum number of consecutive beacons that may be
+	 * early terminated. After this number is reached at least one full
+	 * beacon must be correctly received in FW before beacon ET
+	 * resumes.
+	 *
+	 * Range 0 - 255
+	 */
+	u8 bet_max_consecutive;
+
+	/*
+	 * Specifies the maximum number of times to try PSM entry if it fails
+	 * (if sending the appropriate null-func message fails.)
+	 *
+	 * Range 0 - 255
+	 */
+	u8 psm_entry_retries;
+};
+
+#define CONF_SR_ERR_TBL_MAX_VALUES   14
+
+struct conf_mart_reflex_err_table {
+	/*
+	 * Length of the error table values table.
+	 *
+	 * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
+	 */
+	u8 len;
+
+	/*
+	 * Smart Reflex error table upper limit.
+	 *
+	 * Range: s8
+	 */
+	s8 upper_limit;
+
+	/*
+	 * Smart Reflex error table values.
+	 *
+	 * Range: s8
+	 */
+	s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
+};
+
+enum {
+	CONF_REF_CLK_19_2_E,
+	CONF_REF_CLK_26_E,
+	CONF_REF_CLK_38_4_E,
+	CONF_REF_CLK_52_E
+};
+
+enum single_dual_band_enum {
+	CONF_SINGLE_BAND,
+	CONF_DUAL_BAND
+};
+
+struct conf_general_parms {
+	/*
+	 * RF Reference Clock type / speed
+	 *
+	 * Range: CONF_REF_CLK_*
+	 */
+	u8 ref_clk;
+
+	/*
+	 * Settling time of the reference clock after boot.
+	 *
+	 * Range: u8
+	 */
+	u8 settling_time;
+
+	/*
+	 * Flag defining whether clock is valid on wakeup.
+	 *
+	 * Range: 0 - not valid on wakeup, 1 - valid on wakeup
+	 */
+	u8 clk_valid_on_wakeup;
+
+	/*
+	 * DC-to-DC mode.
+	 *
+	 * Range: Unknown
+	 */
+	u8 dc2dcmode;
+
+	/*
+	 * Flag defining whether used as single or dual-band.
+	 *
+	 * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND
+	 */
+	u8 single_dual_band;
+
+	/*
+	 * TX bip fem autodetect flag.
+	 *
+	 * Range: Unknown
+	 */
+	u8 tx_bip_fem_autodetect;
+
+	/*
+	 * TX bip gem manufacturer.
+	 *
+	 * Range: Unknown
+	 */
+	u8 tx_bip_fem_manufacturer;
+
+	/*
+	 * Settings flags.
+	 *
+	 * Range: Unknown
+	 */
+	u8 settings;
+};
+
+#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
+#define CONF_NUMBER_OF_SUB_BANDS_5  7
+#define CONF_NUMBER_OF_RATE_GROUPS  6
+#define CONF_NUMBER_OF_CHANNELS_2_4 14
+#define CONF_NUMBER_OF_CHANNELS_5   35
+
+struct conf_radio_parms {
+	/*
+	 * Static radio parameters for 2.4GHz
+	 *
+	 * Range: unknown
+	 */
+	u8 rx_trace_loss;
+	u8 tx_trace_loss;
+	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/*
+	 * Static radio parameters for 5GHz
+	 *
+	 * Range: unknown
+	 */
+	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/*
+	 * Dynamic radio parameters for 2.4GHz
+	 *
+	 * Range: unknown
+	 */
+	s16 tx_ref_pd_voltage;
+	s8  tx_ref_power;
+	s8  tx_offset_db;
+
+	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
+
+	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
+	u8  rx_fem_insertion_loss;
+
+	/*
+	 * Dynamic radio parameters for 5GHz
+	 *
+	 * Range: unknown
+	 */
+	s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	/* FIXME: this is inconsistent with the types for 2.4GHz */
+	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+};
+
+#define CONF_SR_ERR_TBL_COUNT        3
+
+struct conf_init_settings {
+	/*
+	 * Configure Smart Reflex error table values.
+	 */
+	struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
+
+	/*
+	 * Smart Reflex enable flag.
+	 *
+	 * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
+	 */
+	u8 sr_enable;
+
+	/*
+	 * Configure general parameters.
+	 */
+	struct conf_general_parms genparam;
+
+	/*
+	 * Configure radio parameters.
+	 */
+	struct conf_radio_parms radioparam;
+
+};
+
+struct conf_drv_settings {
+	struct conf_sg_settings sg;
+	struct conf_rx_settings rx;
+	struct conf_tx_settings tx;
+	struct conf_conn_settings conn;
+	struct conf_init_settings init;
+};
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index f3afd4a..d13fdd9 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -26,21 +26,84 @@
 #include "wl1271_spi.h"
 #include "wl1271_event.h"
 #include "wl1271_ps.h"
+#include "wl12xx_80211.h"
 
 static int wl1271_event_scan_complete(struct wl1271 *wl,
 				      struct event_mailbox *mbox)
 {
+	int size = sizeof(struct wl12xx_probe_req_template);
 	wl1271_debug(DEBUG_EVENT, "status: 0x%x",
 		     mbox->scheduled_scan_status);
 
 	if (wl->scanning) {
-		mutex_unlock(&wl->mutex);
-		ieee80211_scan_completed(wl->hw, false);
-		mutex_lock(&wl->mutex);
-		wl->scanning = false;
+		if (wl->scan.state == WL1271_SCAN_BAND_DUAL) {
+			wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+						NULL, size);
+			/* 2.4 GHz band scanned, scan 5 GHz band, pretend
+			 * to the wl1271_cmd_scan function that we are not
+			 * scanning as it checks that.
+			 */
+			wl->scanning = false;
+			wl1271_cmd_scan(wl, wl->scan.ssid, wl->scan.ssid_len,
+						wl->scan.active,
+						wl->scan.high_prio,
+						WL1271_SCAN_BAND_5_GHZ,
+						wl->scan.probe_requests);
+		} else {
+			if (wl->scan.state == WL1271_SCAN_BAND_2_4_GHZ)
+				wl1271_cmd_template_set(wl,
+						CMD_TEMPL_CFG_PROBE_REQ_2_4,
+						NULL, size);
+			else
+				wl1271_cmd_template_set(wl,
+						CMD_TEMPL_CFG_PROBE_REQ_5,
+						NULL, size);
+
+			mutex_unlock(&wl->mutex);
+			ieee80211_scan_completed(wl->hw, false);
+			mutex_lock(&wl->mutex);
+			wl->scanning = false;
+		}
+	}
+	return 0;
+}
+
+static int wl1271_event_ps_report(struct wl1271 *wl,
+				  struct event_mailbox *mbox,
+				  bool *beacon_loss)
+{
+	int ret = 0;
+
+	wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status);
+
+	switch (mbox->ps_status) {
+	case EVENT_ENTER_POWER_SAVE_FAIL:
+		if (!wl->psm) {
+			wl->psm_entry_retry = 0;
+			break;
+		}
+
+		if (wl->psm_entry_retry < wl->conf.conn.psm_entry_retries) {
+			wl->psm_entry_retry++;
+			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+		} else {
+			wl1271_error("PSM entry failed, giving up.\n");
+			wl->psm_entry_retry = 0;
+			*beacon_loss = true;
+		}
+		break;
+	case EVENT_ENTER_POWER_SAVE_SUCCESS:
+		wl->psm_entry_retry = 0;
+		break;
+	case EVENT_EXIT_POWER_SAVE_FAIL:
+		wl1271_info("PSM exit failed");
+		break;
+	case EVENT_EXIT_POWER_SAVE_SUCCESS:
+	default:
+		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
@@ -54,10 +117,12 @@
 {
 	int ret;
 	u32 vector;
+	bool beacon_loss = false;
 
 	wl1271_event_mbox_dump(mbox);
 
-	vector = mbox->events_vector & ~(mbox->events_mask);
+	vector = le32_to_cpu(mbox->events_vector);
+	vector &= ~(le32_to_cpu(mbox->events_mask));
 	wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
 
 	if (vector & SCAN_COMPLETE_EVENT_ID) {
@@ -66,14 +131,34 @@
 			return ret;
 	}
 
-	if (vector & BSS_LOSE_EVENT_ID) {
+	/*
+	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
+	 * filtering) is enabled. Without PSM, the stack will receive all
+	 * beacons and can detect beacon loss by itself.
+	 */
+	if (vector & BSS_LOSE_EVENT_ID && wl->psm) {
 		wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
 
-		if (wl->psm_requested && wl->psm) {
-			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
-			if (ret < 0)
-				return ret;
-		}
+		/* indicate to the stack, that beacons have been lost */
+		beacon_loss = true;
+	}
+
+	if (vector & PS_REPORT_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
+		ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (beacon_loss) {
+		/* Obviously, it's dangerous to release the mutex while
+		   we are holding many of the variables in the wl struct.
+		   That's why it's done last in the function, and care must
+		   be taken that nothing more is done after this function
+		   returns. */
+		mutex_unlock(&wl->mutex);
+		ieee80211_beacon_loss(wl->vif);
+		mutex_lock(&wl->mutex);
 	}
 
 	return 0;
@@ -92,14 +177,14 @@
 
 void wl1271_event_mbox_config(struct wl1271 *wl)
 {
-	wl->mbox_ptr[0] = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[0] = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR);
 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
 
 	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
 		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
 }
 
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num, bool do_ack)
 {
 	struct event_mailbox mbox;
 	int ret;
@@ -110,8 +195,8 @@
 		return -EINVAL;
 
 	/* first we read the mbox descriptor */
-	wl1271_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
-			    sizeof(struct event_mailbox));
+	wl1271_spi_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+			sizeof(struct event_mailbox), false);
 
 	/* process the descriptor */
 	ret = wl1271_event_process(wl, &mbox);
@@ -119,7 +204,9 @@
 		return ret;
 
 	/* then we let the firmware know it can go on...*/
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+	if (do_ack)
+		wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG,
+				   INTR_TRIG_EVENT_ACK);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
index 2cdce7c..4e3f55e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -63,36 +63,43 @@
 	EVENT_MBOX_ALL_EVENT_ID			 = 0x7fffffff,
 };
 
+enum {
+	EVENT_ENTER_POWER_SAVE_FAIL = 0,
+	EVENT_ENTER_POWER_SAVE_SUCCESS,
+	EVENT_EXIT_POWER_SAVE_FAIL,
+	EVENT_EXIT_POWER_SAVE_SUCCESS,
+};
+
 struct event_debug_report {
 	u8 debug_event_id;
 	u8 num_params;
-	u16 pad;
-	u32 report_1;
-	u32 report_2;
-	u32 report_3;
+	__le16 pad;
+	__le32 report_1;
+	__le32 report_2;
+	__le32 report_3;
 } __attribute__ ((packed));
 
 #define NUM_OF_RSSI_SNR_TRIGGERS 8
 
 struct event_mailbox {
-	u32 events_vector;
-	u32 events_mask;
-	u32 reserved_1;
-	u32 reserved_2;
+	__le32 events_vector;
+	__le32 events_mask;
+	__le32 reserved_1;
+	__le32 reserved_2;
 
 	u8 dbg_event_id;
 	u8 num_relevant_params;
-	u16 reserved_3;
-	u32 event_report_p1;
-	u32 event_report_p2;
-	u32 event_report_p3;
+	__le16 reserved_3;
+	__le32 event_report_p1;
+	__le32 event_report_p2;
+	__le32 event_report_p3;
 
 	u8 number_of_scan_results;
 	u8 scan_tag;
 	u8 reserved_4[2];
-	u32 compl_scheduled_scan_status;
+	__le32 compl_scheduled_scan_status;
 
-	u16 scheduled_scan_attended_channels;
+	__le16 scheduled_scan_attended_channels;
 	u8 soft_gemini_sense_info;
 	u8 soft_gemini_protective_info;
 	s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS];
@@ -105,6 +112,6 @@
 
 int wl1271_event_unmask(struct wl1271 *wl);
 void wl1271_event_mbox_config(struct wl1271 *wl);
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox, bool do_ack);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 490df21..11249b4 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -59,6 +59,14 @@
 	if (ret < 0)
 		return ret;
 
+	if (wl1271_11a_enabled()) {
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
+				NULL,
+				sizeof(struct wl12xx_probe_req_template));
+		if (ret < 0)
+			return ret;
+	}
+
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL,
 				      sizeof(struct wl12xx_null_data_template));
 	if (ret < 0)
@@ -94,7 +102,7 @@
 {
 	int ret;
 
-	ret = wl1271_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+	ret = wl1271_acx_rx_msdu_life_time(wl);
 	if (ret < 0)
 		return ret;
 
@@ -117,7 +125,7 @@
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_group_address_tbl(wl);
+	ret = wl1271_acx_group_address_tbl(wl, true, NULL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -125,7 +133,7 @@
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+	ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold);
 	if (ret < 0)
 		return ret;
 
@@ -136,7 +144,8 @@
 {
 	int ret;
 
-	ret = wl1271_acx_beacon_filter_opt(wl);
+	/* disable beacon filtering at this stage */
+	ret = wl1271_acx_beacon_filter_opt(wl, false);
 	if (ret < 0)
 		return ret;
 
@@ -184,118 +193,15 @@
 	return 0;
 }
 
-static int wl1271_init_general_parms(struct wl1271 *wl)
-{
-	struct wl1271_general_parms *gen_parms;
-	int ret;
-
-	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
-	if (!gen_parms)
-		return -ENOMEM;
-
-	gen_parms->id = TEST_CMD_INI_FILE_GENERAL_PARAM;
-
-	gen_parms->ref_clk = REF_CLK_38_4_E;
-	/* FIXME: magic numbers */
-	gen_parms->settling_time = 5;
-	gen_parms->clk_valid_on_wakeup = 0;
-	gen_parms->dc2dcmode = 0;
-	gen_parms->single_dual_band = 0;
-	gen_parms->tx_bip_fem_autodetect = 1;
-	gen_parms->tx_bip_fem_manufacturer = 1;
-	gen_parms->settings = 1;
-
-	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
-	if (ret < 0) {
-		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
-		return ret;
-	}
-
-	kfree(gen_parms);
-	return 0;
-}
-
-static int wl1271_init_radio_parms(struct wl1271 *wl)
-{
-	/*
-	 * FIXME: All these magic numbers should be moved to some place where
-	 * they can be configured (separate file?)
-	 */
-
-	struct wl1271_radio_parms *radio_parms;
-	int ret;
-	u8 compensation[] = { 0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8, 0xfc, 0x00,
-			      0x08, 0x10, 0xf0, 0xf8, 0x00, 0x0a, 0x14 };
-
-	u8 tx_rate_limits_normal[]   = { 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 };
-	u8 tx_rate_limits_degraded[] = { 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 };
-
-	u8 tx_channel_limits_11b[] = { 0x22, 0x50, 0x50, 0x50,
-				       0x50, 0x50, 0x50, 0x50,
-				       0x50, 0x50, 0x22, 0x50,
-				       0x22, 0x50 };
-
-	u8 tx_channel_limits_ofdm[] = { 0x20, 0x50, 0x50, 0x50,
-					0x50, 0x50, 0x50, 0x50,
-					0x50, 0x50, 0x20, 0x50,
-					0x20, 0x50 };
-
-	u8 tx_pdv_rate_offsets[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-	u8 tx_ibias[] = { 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 };
-
-	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
-	if (!radio_parms)
-		return -ENOMEM;
-
-	radio_parms->id = TEST_CMD_INI_FILE_RADIO_PARAM;
-
-	/* Static radio parameters */
-	radio_parms->rx_trace_loss = 10;
-	radio_parms->tx_trace_loss = 10;
-	memcpy(radio_parms->rx_rssi_and_proc_compens, compensation,
-	       sizeof(compensation));
-
-	/* We don't set the 5GHz -- N/A */
-
-	/* Dynamic radio parameters */
-	radio_parms->tx_ref_pd_voltage = cpu_to_le16(0x24e);
-	radio_parms->tx_ref_power = 0x78;
-	radio_parms->tx_offset_db = 0x0;
-
-	memcpy(radio_parms->tx_rate_limits_normal, tx_rate_limits_normal,
-	       sizeof(tx_rate_limits_normal));
-	memcpy(radio_parms->tx_rate_limits_degraded, tx_rate_limits_degraded,
-	       sizeof(tx_rate_limits_degraded));
-
-	memcpy(radio_parms->tx_channel_limits_11b, tx_channel_limits_11b,
-	       sizeof(tx_channel_limits_11b));
-	memcpy(radio_parms->tx_channel_limits_ofdm, tx_channel_limits_ofdm,
-	       sizeof(tx_channel_limits_ofdm));
-	memcpy(radio_parms->tx_pdv_rate_offsets, tx_pdv_rate_offsets,
-	       sizeof(tx_pdv_rate_offsets));
-	memcpy(radio_parms->tx_ibias, tx_ibias,
-	       sizeof(tx_ibias));
-
-	radio_parms->rx_fem_insertion_loss = 0x14;
-
-	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
-	if (ret < 0)
-		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
-
-	kfree(radio_parms);
-	return ret;
-}
-
 int wl1271_hw_init(struct wl1271 *wl)
 {
 	int ret;
 
-	ret = wl1271_init_general_parms(wl);
+	ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_init_radio_parms(wl);
+	ret = wl1271_cmd_radio_parms(wl);
 	if (ret < 0)
 		return ret;
 
@@ -311,8 +217,8 @@
 
 	/* RX config */
 	ret = wl1271_init_rx_config(wl,
-				       RX_CFG_PROMISCUOUS | RX_CFG_TSF,
-				       RX_FILTER_OPTION_DEF);
+				    RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+				    RX_FILTER_OPTION_DEF);
 	/* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
 	   RX_FILTER_OPTION_FILTER_ALL); */
 	if (ret < 0)
@@ -323,6 +229,11 @@
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* Initialize connection monitoring thresholds */
+	ret = wl1271_acx_conn_monit_params(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	/* Beacon filtering */
 	ret = wl1271_init_beacon_filter(wl);
 	if (ret < 0)
@@ -369,7 +280,7 @@
 		goto out_free_memmap;
 
 	/* Configure TX rate classes */
-	ret = wl1271_acx_rate_policies(wl);
+	ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_ALL);
 	if (ret < 0)
 		goto out_free_memmap;
 
@@ -388,10 +299,16 @@
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* Configure smart reflex */
+	ret = wl1271_acx_smart_reflex(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	return 0;
 
  out_free_memmap:
 	kfree(wl->target_mem_map);
+	wl->target_mem_map = NULL;
 
 	return ret;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/wl1271_init.h
index bd8ff0f..930677f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.h
+++ b/drivers/net/wireless/wl12xx/wl1271_init.h
@@ -29,87 +29,4 @@
 int wl1271_hw_init_power_auth(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
 
-/* These are not really a TEST_CMD, but the ref driver uses them as such */
-#define TEST_CMD_INI_FILE_RADIO_PARAM   0x19
-#define TEST_CMD_INI_FILE_GENERAL_PARAM 0x1E
-
-struct wl1271_general_parms {
-	u8 id;
-	u8 padding[3];
-
-	u8 ref_clk;
-	u8 settling_time;
-	u8 clk_valid_on_wakeup;
-	u8 dc2dcmode;
-	u8 single_dual_band;
-
-	u8 tx_bip_fem_autodetect;
-	u8 tx_bip_fem_manufacturer;
-	u8 settings;
-} __attribute__ ((packed));
-
-enum ref_clk_enum {
-	REF_CLK_19_2_E,
-	REF_CLK_26_E,
-	REF_CLK_38_4_E,
-	REF_CLK_52_E
-};
-
-#define RSSI_AND_PROCESS_COMPENSATION_SIZE 15
-#define NUMBER_OF_SUB_BANDS_5  7
-#define NUMBER_OF_RATE_GROUPS  6
-#define NUMBER_OF_CHANNELS_2_4 14
-#define NUMBER_OF_CHANNELS_5   35
-
-struct wl1271_radio_parms {
-	u8 id;
-	u8 padding[3];
-
-	/* Static radio parameters */
-	/* 2.4GHz */
-	u8 rx_trace_loss;
-	u8 tx_trace_loss;
-	s8 rx_rssi_and_proc_compens[RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/* 5GHz */
-	u8 rx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
-	u8 tx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
-	s8 rx_rssi_and_proc_compens_5[RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/* Dynamic radio parameters */
-	/* 2.4GHz */
-	s16 tx_ref_pd_voltage;
-	s8  tx_ref_power;
-	s8  tx_offset_db;
-
-	s8  tx_rate_limits_normal[NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded[NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_11b[NUMBER_OF_CHANNELS_2_4];
-	s8  tx_channel_limits_ofdm[NUMBER_OF_CHANNELS_2_4];
-	s8  tx_pdv_rate_offsets[NUMBER_OF_RATE_GROUPS];
-
-	u8  tx_ibias[NUMBER_OF_RATE_GROUPS];
-	u8  rx_fem_insertion_loss;
-
-	u8 padding2;
-
-	/* 5GHz */
-	s16 tx_ref_pd_voltage_5[NUMBER_OF_SUB_BANDS_5];
-	s8  tx_ref_power_5[NUMBER_OF_SUB_BANDS_5];
-	s8  tx_offset_db_5[NUMBER_OF_SUB_BANDS_5];
-
-	s8  tx_rate_limits_normal_5[NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded_5[NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_ofdm_5[NUMBER_OF_CHANNELS_5];
-	s8  tx_pdv_rate_offsets_5[NUMBER_OF_RATE_GROUPS];
-
-	/* FIXME: this is inconsistent with the types for 2.4GHz */
-	s8  tx_ibias_5[NUMBER_OF_RATE_GROUPS];
-	s8  rx_fem_insertion_loss_5[NUMBER_OF_SUB_BANDS_5];
-
-	u8 padding3[2];
-} __attribute__ ((packed));
-
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 27298b1..b62c00f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -30,7 +30,9 @@
 #include <linux/spi/spi.h>
 #include <linux/crc32.h>
 #include <linux/etherdevice.h>
+#include <linux/vmalloc.h>
 #include <linux/spi/wl12xx.h>
+#include <linux/inetdevice.h>
 
 #include "wl1271.h"
 #include "wl12xx_80211.h"
@@ -45,10 +47,314 @@
 #include "wl1271_cmd.h"
 #include "wl1271_boot.h"
 
+static struct conf_drv_settings default_conf = {
+	.sg = {
+		.per_threshold               = 7500,
+		.max_scan_compensation_time  = 120000,
+		.nfs_sample_interval         = 400,
+		.load_ratio                  = 50,
+		.auto_ps_mode                = 0,
+		.probe_req_compensation      = 170,
+		.scan_window_compensation    = 50,
+		.antenna_config              = 0,
+		.beacon_miss_threshold       = 60,
+		.rate_adaptation_threshold   = CONF_HW_BIT_RATE_12MBPS,
+		.rate_adaptation_snr         = 0
+	},
+	.rx = {
+		.rx_msdu_life_time           = 512000,
+		.packet_detection_threshold  = 0,
+		.ps_poll_timeout             = 15,
+		.upsd_timeout                = 15,
+		.rts_threshold               = 2347,
+		.rx_cca_threshold            = 0xFFEF,
+		.irq_blk_threshold           = 0,
+		.irq_pkt_threshold           = USHORT_MAX,
+		.irq_timeout                 = 5,
+		.queue_type                  = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
+	},
+	.tx = {
+		.tx_energy_detection         = 0,
+		.rc_conf                     = {
+			.enabled_rates       = CONF_TX_RATE_MASK_UNSPECIFIED,
+			.short_retry_limit   = 10,
+			.long_retry_limit    = 10,
+			.aflags              = 0
+		},
+		.ac_conf_count               = 4,
+		.ac_conf                     = {
+			[0] = {
+				.ac          = CONF_TX_AC_BE,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = 3,
+				.tx_op_limit = 0,
+			},
+			[1] = {
+				.ac          = CONF_TX_AC_BK,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = 7,
+				.tx_op_limit = 0,
+			},
+			[2] = {
+				.ac          = CONF_TX_AC_VI,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = CONF_TX_AIFS_PIFS,
+				.tx_op_limit = 3008,
+			},
+			[3] = {
+				.ac          = CONF_TX_AC_VO,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = CONF_TX_AIFS_PIFS,
+				.tx_op_limit = 1504,
+			},
+		},
+		.tid_conf_count = 7,
+		.tid_conf = {
+			[0] = {
+				.queue_id    = 0,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[1] = {
+				.queue_id    = 1,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[2] = {
+				.queue_id    = 2,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[3] = {
+				.queue_id    = 3,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[4] = {
+				.queue_id    = 4,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[5] = {
+				.queue_id    = 5,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[6] = {
+				.queue_id    = 6,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			}
+		},
+		.frag_threshold              = IEEE80211_MAX_FRAG_THRESHOLD,
+		.tx_compl_timeout            = 5,
+		.tx_compl_threshold          = 5
+	},
+	.conn = {
+		.wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
+		.listen_interval             = 0,
+		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
+		.bcn_filt_ie_count           = 1,
+		.bcn_filt_ie = {
+			[0] = {
+				.ie          = WLAN_EID_CHANNEL_SWITCH,
+				.rule        = CONF_BCN_RULE_PASS_ON_APPEARANCE,
+			}
+		},
+		.synch_fail_thold            = 5,
+		.bss_lose_timeout            = 100,
+		.beacon_rx_timeout           = 10000,
+		.broadcast_timeout           = 20000,
+		.rx_broadcast_in_ps          = 1,
+		.ps_poll_threshold           = 4,
+		.sig_trigger_count           = 2,
+		.sig_trigger = {
+			[0] = {
+				.threshold   = -75,
+				.pacing      = 500,
+				.metric      = CONF_TRIG_METRIC_RSSI_BEACON,
+				.type        = CONF_TRIG_EVENT_TYPE_EDGE,
+				.direction   = CONF_TRIG_EVENT_DIR_LOW,
+				.hysteresis  = 2,
+				.index       = 0,
+				.enable      = 1
+			},
+			[1] = {
+				.threshold   = -75,
+				.pacing      = 500,
+				.metric      = CONF_TRIG_METRIC_RSSI_BEACON,
+				.type        = CONF_TRIG_EVENT_TYPE_EDGE,
+				.direction   = CONF_TRIG_EVENT_DIR_HIGH,
+				.hysteresis  = 2,
+				.index       = 1,
+				.enable      = 1
+			}
+		},
+		.sig_weights = {
+			.rssi_bcn_avg_weight = 10,
+			.rssi_pkt_avg_weight = 10,
+			.snr_bcn_avg_weight  = 10,
+			.snr_pkt_avg_weight  = 10
+		},
+		.bet_enable                  = CONF_BET_MODE_ENABLE,
+		.bet_max_consecutive         = 10,
+		.psm_entry_retries           = 3
+	},
+	.init = {
+		.sr_err_tbl = {
+			[0] = {
+				.len         = 7,
+				.upper_limit = 0x03,
+				.values      = {
+					0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
+					0x00 }
+			},
+			[1] = {
+				.len         = 7,
+				.upper_limit = 0x03,
+				.values      = {
+					0x18, 0x10, 0x05, 0xf6, 0xf0, 0xe8,
+					0x00 }
+			},
+			[2] = {
+				.len         = 7,
+				.upper_limit = 0x03,
+				.values      = {
+					0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
+					0x00 }
+			}
+		},
+		.sr_enable                   = 1,
+		.genparam                    = {
+			.ref_clk             = CONF_REF_CLK_38_4_E,
+			.settling_time       = 5,
+			.clk_valid_on_wakeup = 0,
+			.dc2dcmode           = 0,
+			.single_dual_band    = CONF_SINGLE_BAND,
+			.tx_bip_fem_autodetect = 0,
+			.tx_bip_fem_manufacturer = 1,
+			.settings = 1,
+		},
+		.radioparam = {
+			.rx_trace_loss       = 10,
+			.tx_trace_loss       = 10,
+			.rx_rssi_and_proc_compens = {
+				0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
+				0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
+				0x00, 0x0a, 0x14 },
+			.rx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
+			.tx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
+			.rx_rssi_and_proc_compens_5 = {
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				0x00, 0x00, 0x00 },
+			.tx_ref_pd_voltage   = 0x24e,
+			.tx_ref_power        = 0x78,
+			.tx_offset_db        = 0x0,
+			.tx_rate_limits_normal = {
+				0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+			.tx_rate_limits_degraded = {
+				0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+			.tx_channel_limits_11b = {
+				0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
+				0x22, 0x50 },
+			.tx_channel_limits_ofdm = {
+				0x20, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
+				0x20, 0x50 },
+			.tx_pdv_rate_offsets = {
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+			.tx_ibias            = {
+				0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
+			.rx_fem_insertion_loss = 0x14,
+			.tx_ref_pd_voltage_5 = {
+				0x0190, 0x01a4, 0x01c3, 0x01d8,
+				0x020a, 0x021c },
+			.tx_ref_power_5      = {
+				0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80 },
+			.tx_offset_db_5      = {
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+			.tx_rate_limits_normal_5 = {
+				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+			.tx_rate_limits_degraded_5 = {
+				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+			.tx_channel_limits_ofdm_5 = {
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50 },
+			.tx_pdv_rate_offsets_5 = {
+				0x01, 0x02, 0x02, 0x02, 0x02, 0x00 },
+			.tx_ibias_5          = {
+				0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
+			.rx_fem_insertion_loss_5 = {
+				0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 }
+		}
+	}
+};
+
+static LIST_HEAD(wl_list);
+
+static void wl1271_conf_init(struct wl1271 *wl)
+{
+
+	/*
+	 * This function applies the default configuration to the driver. This
+	 * function is invoked upon driver load (spi probe.)
+	 *
+	 * The configuration is stored in a run-time structure in order to
+	 * facilitate for run-time adjustment of any of the parameters. Making
+	 * changes to the configuration structure will apply the new values on
+	 * the next interface up (wl1271_op_start.)
+	 */
+
+	/* apply driver default configuration */
+	memcpy(&wl->conf, &default_conf, sizeof(default_conf));
+
+	if (wl1271_11a_enabled())
+		wl->conf.init.genparam.single_dual_band = CONF_DUAL_BAND;
+}
+
+
 static int wl1271_plt_init(struct wl1271 *wl)
 {
 	int ret;
 
+	ret = wl1271_cmd_general_parms(wl);
+	if (ret < 0)
+		return ret;
+
+	ret = wl1271_cmd_radio_parms(wl);
+	if (ret < 0)
+		return ret;
+
 	ret = wl1271_acx_init_mem_config(wl);
 	if (ret < 0)
 		return ret;
@@ -75,20 +381,14 @@
 	wl->set_power(true);
 }
 
-static void wl1271_fw_status(struct wl1271 *wl, struct wl1271_fw_status *status)
+static void wl1271_fw_status(struct wl1271 *wl,
+			     struct wl1271_fw_status *status)
 {
 	u32 total = 0;
 	int i;
 
-	/*
-	 * FIXME: Reading the FW status directly from the registers seems to
-	 * be the right thing to do, but it doesn't work.  And in the
-	 * reference driver, there is a workaround called
-	 * USE_SDIO_24M_WORKAROUND, which reads the status from memory
-	 * instead, so we do the same here.
-	 */
-
-	wl1271_spi_mem_read(wl, STATUS_MEM_ADDRESS, status, sizeof(*status));
+	wl1271_spi_read(wl, FW_STATUS_ADDR, status,
+			sizeof(*status), false);
 
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
@@ -99,25 +399,28 @@
 
 	/* update number of available TX blocks */
 	for (i = 0; i < NUM_TX_QUEUES; i++) {
-		u32 cnt = status->tx_released_blks[i] - wl->tx_blocks_freed[i];
-		wl->tx_blocks_freed[i] = status->tx_released_blks[i];
+		u32 cnt = le32_to_cpu(status->tx_released_blks[i]) -
+			wl->tx_blocks_freed[i];
+
+		wl->tx_blocks_freed[i] =
+			le32_to_cpu(status->tx_released_blks[i]);
 		wl->tx_blocks_available += cnt;
 		total += cnt;
 	}
 
 	/* if more blocks are available now, schedule some tx work */
 	if (total && !skb_queue_empty(&wl->tx_queue))
-		schedule_work(&wl->tx_work);
+		ieee80211_queue_work(wl->hw, &wl->tx_work);
 
 	/* update the host-chipset time offset */
-	wl->time_offset = jiffies_to_usecs(jiffies) - status->fw_localtime;
+	wl->time_offset = jiffies_to_usecs(jiffies) -
+		le32_to_cpu(status->fw_localtime);
 }
 
-#define WL1271_IRQ_MAX_LOOPS 10
 static void wl1271_irq_work(struct work_struct *work)
 {
-	u32 intr, ctr = WL1271_IRQ_MAX_LOOPS;
 	int ret;
+	u32 intr;
 	struct wl1271 *wl =
 		container_of(work, struct wl1271, irq_work);
 
@@ -132,9 +435,10 @@
 	if (ret < 0)
 		goto out;
 
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 
-	intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	wl1271_fw_status(wl, wl->fw_status);
+	intr = le32_to_cpu(wl->fw_status->intr);
 	if (!intr) {
 		wl1271_debug(DEBUG_IRQ, "Zero interrupt received.");
 		goto out_sleep;
@@ -142,46 +446,39 @@
 
 	intr &= WL1271_INTR_MASK;
 
-	do {
-		wl1271_fw_status(wl, wl->fw_status);
+	if (intr & WL1271_ACX_INTR_EVENT_A) {
+		bool do_ack = (intr & WL1271_ACX_INTR_EVENT_B) ? false : true;
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
+		wl1271_event_handle(wl, 0, do_ack);
+	}
 
+	if (intr & WL1271_ACX_INTR_EVENT_B) {
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
+		wl1271_event_handle(wl, 1, true);
+	}
 
-		if (intr & (WL1271_ACX_INTR_EVENT_A |
-			    WL1271_ACX_INTR_EVENT_B)) {
-			wl1271_debug(DEBUG_IRQ,
-				     "WL1271_ACX_INTR_EVENT (0x%x)", intr);
-			if (intr & WL1271_ACX_INTR_EVENT_A)
-				wl1271_event_handle(wl, 0);
-			else
-				wl1271_event_handle(wl, 1);
-		}
+	if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
+		wl1271_debug(DEBUG_IRQ,
+			     "WL1271_ACX_INTR_INIT_COMPLETE");
 
-		if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
-			wl1271_debug(DEBUG_IRQ,
-				     "WL1271_ACX_INTR_INIT_COMPLETE");
+	if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
 
-		if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
-			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
+	if (intr & WL1271_ACX_INTR_DATA) {
+		u8 tx_res_cnt = wl->fw_status->tx_results_counter -
+			wl->tx_results_count;
 
-		if (intr & WL1271_ACX_INTR_DATA) {
-			u8 tx_res_cnt = wl->fw_status->tx_results_counter -
-				wl->tx_results_count;
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
-			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
+		/* check for tx results */
+		if (tx_res_cnt)
+			wl1271_tx_complete(wl, tx_res_cnt);
 
-			/* check for tx results */
-			if (tx_res_cnt)
-				wl1271_tx_complete(wl, tx_res_cnt);
-
-			wl1271_rx(wl, wl->fw_status);
-		}
-
-		intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
-		intr &= WL1271_INTR_MASK;
-	} while (intr && --ctr);
+		wl1271_rx(wl, wl->fw_status);
+	}
 
 out_sleep:
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
 			   WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
 	wl1271_ps_elp_sleep(wl);
 
@@ -205,7 +502,7 @@
 		wl->elp_compl = NULL;
 	}
 
-	schedule_work(&wl->irq_work);
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
 	return IRQ_HANDLED;
@@ -231,7 +528,7 @@
 	}
 
 	wl->fw_len = fw->size;
-	wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+	wl->fw = vmalloc(wl->fw_len);
 
 	if (!wl->fw) {
 		wl1271_error("could not allocate memory for the firmware");
@@ -292,7 +589,7 @@
 	u32 elp_reg;
 
 	elp_reg = ELPCTRL_WAKE_UP;
-	wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
 }
 
 static int wl1271_setup(struct wl1271 *wl)
@@ -314,6 +611,7 @@
 
 static int wl1271_chip_wakeup(struct wl1271 *wl)
 {
+	struct wl1271_partition_set partition;
 	int ret = 0;
 
 	wl1271_power_on(wl);
@@ -323,11 +621,10 @@
 
 	/* We don't need a real memory partition here, because we only want
 	 * to use the registers at this point. */
-	wl1271_set_partition(wl,
-			     0x00000000,
-			     0x00000000,
-			     REGISTERS_BASE,
-			     REGISTERS_DOWN_SIZE);
+	memset(&partition, 0, sizeof(partition));
+	partition.reg.start = REGISTERS_BASE;
+	partition.reg.size = REGISTERS_DOWN_SIZE;
+	wl1271_set_partition(wl, &partition);
 
 	/* ELP module wake up */
 	wl1271_fw_wakeup(wl);
@@ -335,7 +632,7 @@
 	/* whal_FwCtrl_BootSm() */
 
 	/* 0. read chip id from CHIP_ID */
-	wl->chip.id = wl1271_reg_read32(wl, CHIP_ID_B);
+	wl->chip.id = wl1271_spi_read32(wl, CHIP_ID_B);
 
 	/* 1. check if chip id is valid */
 
@@ -346,7 +643,7 @@
 
 		ret = wl1271_setup(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 		break;
 	case CHIP_ID_1271_PG20:
 		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
@@ -354,58 +651,36 @@
 
 		ret = wl1271_setup(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 		break;
 	default:
 		wl1271_error("unsupported chip id: 0x%x", wl->chip.id);
 		ret = -ENODEV;
-		goto out;
+		goto out_power_off;
 	}
 
 	if (wl->fw == NULL) {
 		ret = wl1271_fetch_firmware(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 	}
 
 	/* No NVS from netlink, try to get it from the filesystem */
 	if (wl->nvs == NULL) {
 		ret = wl1271_fetch_nvs(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 	}
 
+	goto out;
+
+out_power_off:
+	wl1271_power_off(wl);
+
 out:
 	return ret;
 }
 
-static void wl1271_filter_work(struct work_struct *work)
-{
-	struct wl1271 *wl =
-		container_of(work, struct wl1271, filter_work);
-	int ret;
-
-	mutex_lock(&wl->mutex);
-
-	if (wl->state == WL1271_STATE_OFF)
-		goto out;
-
-	ret = wl1271_ps_elp_wakeup(wl, false);
-	if (ret < 0)
-		goto out;
-
-	/* FIXME: replace the magic numbers with proper definitions */
-	ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
-	if (ret < 0)
-		goto out_sleep;
-
-out_sleep:
-	wl1271_ps_elp_sleep(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-}
-
 int wl1271_plt_start(struct wl1271 *wl)
 {
 	int ret;
@@ -429,13 +704,26 @@
 
 	ret = wl1271_boot(wl);
 	if (ret < 0)
-		goto out;
+		goto out_power_off;
 
 	wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
 
 	ret = wl1271_plt_init(wl);
 	if (ret < 0)
-		goto out;
+		goto out_irq_disable;
+
+	/* Make sure power saving is disabled */
+	ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+	if (ret < 0)
+		goto out_irq_disable;
+
+	goto out;
+
+out_irq_disable:
+	wl1271_disable_interrupts(wl);
+
+out_power_off:
+	wl1271_power_off(wl);
 
 out:
 	mutex_unlock(&wl->mutex);
@@ -462,6 +750,7 @@
 	wl1271_power_off(wl);
 
 	wl->state = WL1271_STATE_OFF;
+	wl->rx_counter = 0;
 
 out:
 	mutex_unlock(&wl->mutex);
@@ -481,7 +770,7 @@
 	 * before that, the tx_work will not be initialized!
 	 */
 
-	schedule_work(&wl->tx_work);
+	ieee80211_queue_work(wl->hw, &wl->tx_work);
 
 	/*
 	 * The workqueue is slow to process the tx_queue and we need stop
@@ -501,6 +790,93 @@
 	return NETDEV_TX_OK;
 }
 
+static int wl1271_dev_notify(struct notifier_block *me, unsigned long what,
+			     void *arg)
+{
+	struct net_device *dev;
+	struct wireless_dev *wdev;
+	struct wiphy *wiphy;
+	struct ieee80211_hw *hw;
+	struct wl1271 *wl;
+	struct wl1271 *wl_temp;
+	struct in_device *idev;
+	struct in_ifaddr *ifa = arg;
+	int ret = 0;
+
+	/* FIXME: this ugly function should probably be implemented in the
+	 * mac80211, and here should only be a simple callback handling actual
+	 * setting of the filters. Now we need to dig up references to
+	 * various structures to gain access to what we need.
+	 * Also, because of this, there is no "initial" setting of the filter
+	 * in "op_start", because we don't want to dig up struct net_device
+	 * there - the filter will be set upon first change of the interface
+	 * IP address. */
+
+	dev = ifa->ifa_dev->dev;
+
+	wdev = dev->ieee80211_ptr;
+	if (wdev == NULL)
+		return NOTIFY_DONE;
+
+	wiphy = wdev->wiphy;
+	if (wiphy == NULL)
+		return NOTIFY_DONE;
+
+	hw = wiphy_priv(wiphy);
+	if (hw == NULL)
+		return NOTIFY_DONE;
+
+	/* Check that the interface is one supported by this driver. */
+	wl_temp = hw->priv;
+	list_for_each_entry(wl, &wl_list, list) {
+		if (wl == wl_temp)
+			break;
+	}
+	if (wl == NULL)
+		return NOTIFY_DONE;
+
+	/* Get the interface IP address for the device. "ifa" will become
+	   NULL if:
+	     - there is no IPV4 protocol address configured
+	     - there are multiple (virtual) IPV4 addresses configured
+	   When "ifa" is NULL, filtering will be disabled.
+	*/
+	ifa = NULL;
+	idev = dev->ip_ptr;
+	if (idev)
+		ifa = idev->ifa_list;
+
+	if (ifa && ifa->ifa_next)
+		ifa = NULL;
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+	if (ifa)
+		ret = wl1271_acx_arp_ip_filter(wl, true,
+					       (u8 *)&ifa->ifa_address,
+					       ACX_IPV4_VERSION);
+	else
+		ret = wl1271_acx_arp_ip_filter(wl, false, NULL,
+					       ACX_IPV4_VERSION);
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block wl1271_dev_notifier = {
+	.notifier_call = wl1271_dev_notify,
+};
+
+
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
 	struct wl1271 *wl = hw->priv;
@@ -523,22 +899,32 @@
 
 	ret = wl1271_boot(wl);
 	if (ret < 0)
-		goto out;
+		goto out_power_off;
 
 	ret = wl1271_hw_init(wl);
 	if (ret < 0)
-		goto out;
+		goto out_irq_disable;
 
 	wl->state = WL1271_STATE_ON;
 
 	wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
 
-out:
-	if (ret < 0)
-		wl1271_power_off(wl);
+	goto out;
 
+out_irq_disable:
+	wl1271_disable_interrupts(wl);
+
+out_power_off:
+	wl1271_power_off(wl);
+
+out:
 	mutex_unlock(&wl->mutex);
 
+	if (!ret) {
+		list_add(&wl->list, &wl_list);
+		register_inetaddr_notifier(&wl1271_dev_notifier);
+	}
+
 	return ret;
 }
 
@@ -551,6 +937,9 @@
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 stop");
 
+	unregister_inetaddr_notifier(&wl1271_dev_notifier);
+	list_del(&wl->list);
+
 	mutex_lock(&wl->mutex);
 
 	WARN_ON(wl->state != WL1271_STATE_ON);
@@ -570,7 +959,6 @@
 
 	cancel_work_sync(&wl->irq_work);
 	cancel_work_sync(&wl->tx_work);
-	cancel_work_sync(&wl->filter_work);
 
 	mutex_lock(&wl->mutex);
 
@@ -581,19 +969,25 @@
 	memset(wl->bssid, 0, ETH_ALEN);
 	memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1);
 	wl->ssid_len = 0;
-	wl->listen_int = 1;
 	wl->bss_type = MAX_BSS_TYPE;
+	wl->band = IEEE80211_BAND_2GHZ;
 
 	wl->rx_counter = 0;
 	wl->elp = false;
 	wl->psm = 0;
+	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->tx_blocks_available = 0;
 	wl->tx_results_count = 0;
 	wl->tx_packets_count = 0;
+	wl->tx_security_last_seq = 0;
+	wl->tx_security_seq_16 = 0;
+	wl->tx_security_seq_32 = 0;
 	wl->time_offset = 0;
 	wl->session_counter = 0;
+	wl->joined = false;
+
 	for (i = 0; i < NUM_TX_QUEUES; i++)
 		wl->tx_blocks_freed[i] = 0;
 
@@ -611,6 +1005,12 @@
 		     conf->type, conf->mac_addr);
 
 	mutex_lock(&wl->mutex);
+	if (wl->vif) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	wl->vif = conf->vif;
 
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
@@ -634,7 +1034,12 @@
 static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 					 struct ieee80211_if_init_conf *conf)
 {
+	struct wl1271 *wl = hw->priv;
+
+	mutex_lock(&wl->mutex);
 	wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
+	wl->vif = NULL;
+	mutex_unlock(&wl->mutex);
 }
 
 #if 0
@@ -657,23 +1062,24 @@
 	if (ret < 0)
 		goto out;
 
-	memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+	if (memcmp(wl->bssid, conf->bssid, ETH_ALEN)) {
+		wl1271_debug(DEBUG_MAC80211, "bssid changed");
 
-	ret = wl1271_cmd_build_null_data(wl);
-	if (ret < 0)
-		goto out_sleep;
+		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+
+		ret = wl1271_cmd_join(wl);
+		if (ret < 0)
+			goto out_sleep;
+
+		ret = wl1271_cmd_build_null_data(wl);
+		if (ret < 0)
+			goto out_sleep;
+	}
 
 	wl->ssid_len = conf->ssid_len;
 	if (wl->ssid_len)
 		memcpy(wl->ssid, conf->ssid, wl->ssid_len);
 
-	if (wl->bss_type != BSS_TYPE_IBSS) {
-		/* FIXME: replace the magic numbers with proper definitions */
-		ret = wl1271_cmd_join(wl, wl->bss_type, 5, 100, 1);
-		if (ret < 0)
-			goto out_sleep;
-	}
-
 	if (conf->changed & IEEE80211_IFCC_BEACON) {
 		beacon = ieee80211_beacon_get(hw, vif);
 		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
@@ -691,12 +1097,6 @@
 
 		if (ret < 0)
 			goto out_sleep;
-
-		/* FIXME: replace the magic numbers with proper definitions */
-		ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
-
-		if (ret < 0)
-			goto out_sleep;
 	}
 
 out_sleep:
@@ -724,26 +1124,22 @@
 
 	mutex_lock(&wl->mutex);
 
+	wl->band = conf->channel->band;
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
 
 	if (channel != wl->channel) {
-		u8 old_channel = wl->channel;
+		/*
+		 * We assume that the stack will configure the right channel
+		 * before associating, so we don't need to send a join
+		 * command here.  We will join the right channel when the
+		 * BSSID changes
+		 */
 		wl->channel = channel;
-
-		/* FIXME: use beacon interval provided by mac80211 */
-		ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
-		if (ret < 0) {
-			wl->channel = old_channel;
-			goto out_sleep;
-		}
 	}
 
-	ret = wl1271_cmd_build_null_data(wl);
-	if (ret < 0)
-		goto out_sleep;
-
 	if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
 		wl1271_info("psm enabled");
 
@@ -768,7 +1164,7 @@
 	if (conf->power_level != wl->power_level) {
 		ret = wl1271_acx_tx_power(wl, conf->power_level);
 		if (ret < 0)
-			goto out;
+			goto out_sleep;
 
 		wl->power_level = conf->power_level;
 	}
@@ -782,6 +1178,45 @@
 	return ret;
 }
 
+struct wl1271_filter_params {
+	bool enabled;
+	int mc_list_length;
+	u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN];
+};
+
+static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
+				       struct dev_addr_list *mc_list)
+{
+	struct wl1271_filter_params *fp;
+	int i;
+
+	fp = kzalloc(sizeof(*fp), GFP_ATOMIC);
+	if (!fp) {
+		wl1271_error("Out of memory setting filters.");
+		return 0;
+	}
+
+	/* update multicast filtering parameters */
+	fp->enabled = true;
+	if (mc_count > ACX_MC_ADDRESS_GROUP_MAX) {
+		mc_count = 0;
+		fp->enabled = false;
+	}
+
+	fp->mc_list_length = 0;
+	for (i = 0; i < mc_count; i++) {
+		if (mc_list->da_addrlen == ETH_ALEN) {
+			memcpy(fp->mc_list[fp->mc_list_length],
+			       mc_list->da_addr, ETH_ALEN);
+			fp->mc_list_length++;
+		} else
+			wl1271_warning("Unknown mc address length.");
+		mc_list = mc_list->next;
+	}
+
+	return (u64)(unsigned long)fp;
+}
+
 #define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
 				  FIF_ALLMULTI | \
 				  FIF_FCSFAIL | \
@@ -791,28 +1226,53 @@
 
 static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 				       unsigned int changed,
-				       unsigned int *total,u64 multicast)
+				       unsigned int *total, u64 multicast)
 {
+	struct wl1271_filter_params *fp = (void *)(unsigned long)multicast;
 	struct wl1271 *wl = hw->priv;
+	int ret;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter");
 
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
 	*total &= WL1271_SUPPORTED_FILTERS;
 	changed &= WL1271_SUPPORTED_FILTERS;
 
+	if (*total & FIF_ALLMULTI)
+		ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0);
+	else if (fp)
+		ret = wl1271_acx_group_address_tbl(wl, fp->enabled,
+						   fp->mc_list,
+						   fp->mc_list_length);
+	if (ret < 0)
+		goto out_sleep;
+
+	kfree(fp);
+
+	/* FIXME: We still need to set our filters properly */
+
+	/* determine, whether supported filter values have changed */
 	if (changed == 0)
-		return;
+		goto out_sleep;
 
-	/* FIXME: wl->rx_config and wl->rx_filter are not protected */
-	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
-	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
+	/* apply configured filters */
+	ret = wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+	if (ret < 0)
+		goto out_sleep;
 
-	/*
-	 * FIXME: workqueues need to be properly cancelled on stop(), for
-	 * now let's just disable changing the filter settings. They will
-	 * be updated any on config().
-	 */
-	/* schedule_work(&wl->filter_work); */
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
 }
 
 static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -823,6 +1283,8 @@
 	struct wl1271 *wl = hw->priv;
 	const u8 *addr;
 	int ret;
+	u32 tx_seq_32 = 0;
+	u16 tx_seq_16 = 0;
 	u8 key_type;
 
 	static const u8 bcast_addr[ETH_ALEN] =
@@ -861,11 +1323,15 @@
 		key_type = KEY_TKIP;
 
 		key_conf->hw_key_idx = key_conf->keyidx;
+		tx_seq_32 = wl->tx_security_seq_32;
+		tx_seq_16 = wl->tx_security_seq_16;
 		break;
 	case ALG_CCMP:
 		key_type = KEY_AES;
 
 		key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		tx_seq_32 = wl->tx_security_seq_32;
+		tx_seq_16 = wl->tx_security_seq_16;
 		break;
 	default:
 		wl1271_error("Unknown key algo 0x%x", key_conf->alg);
@@ -879,7 +1345,7 @@
 		ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-					 addr);
+					 addr, tx_seq_32, tx_seq_16);
 		if (ret < 0) {
 			wl1271_error("Could not add or replace key");
 			goto out_sleep;
@@ -890,7 +1356,7 @@
 		ret = wl1271_cmd_set_key(wl, KEY_REMOVE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-					 addr);
+					 addr, 0, 0);
 		if (ret < 0) {
 			wl1271_error("Could not remove key");
 			goto out_sleep;
@@ -921,13 +1387,13 @@
 	struct wl1271 *wl = hw->priv;
 	int ret;
 	u8 *ssid = NULL;
-	size_t ssid_len = 0;
+	size_t len = 0;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan");
 
 	if (req->n_ssids) {
 		ssid = req->ssids[0].ssid;
-		ssid_len = req->ssids[0].ssid_len;
+		len = req->ssids[0].ssid_len;
 	}
 
 	mutex_lock(&wl->mutex);
@@ -936,7 +1402,12 @@
 	if (ret < 0)
 		goto out;
 
-	ret = wl1271_cmd_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+	if (wl1271_11a_enabled())
+		ret = wl1271_cmd_scan(hw->priv, ssid, len, 1, 0,
+				      WL1271_SCAN_BAND_DUAL, 3);
+	else
+		ret = wl1271_cmd_scan(hw->priv, ssid, len, 1, 0,
+				      WL1271_SCAN_BAND_2_4_GHZ, 3);
 
 	wl1271_ps_elp_sleep(wl);
 
@@ -969,6 +1440,22 @@
 	return ret;
 }
 
+static u32 wl1271_enabled_rates_get(struct wl1271 *wl, u64 basic_rate_set)
+{
+	struct ieee80211_supported_band *band;
+	u32 enabled_rates = 0;
+	int bit;
+
+	band = wl->hw->wiphy->bands[wl->band];
+	for (bit = 0; bit < band->n_bitrates; bit++) {
+		if (basic_rate_set & 0x1)
+			enabled_rates |= band->bitrates[bit].hw_value;
+		basic_rate_set >>= 1;
+	}
+
+	return enabled_rates;
+}
+
 static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
 				       struct ieee80211_bss_conf *bss_conf,
@@ -990,6 +1477,12 @@
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
 
+			/*
+			 * with wl1271, we don't need to update the
+			 * beacon_int and dtim_period, because the firmware
+			 * updates it by itself when the first beacon is
+			 * received after a join.
+			 */
 			ret = wl1271_cmd_build_ps_poll(wl, wl->aid);
 			if (ret < 0)
 				goto out_sleep;
@@ -1005,8 +1498,14 @@
 				if (ret < 0)
 					goto out_sleep;
 			}
+		} else {
+			/* use defaults when not associated */
+			wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+			wl->aid = 0;
 		}
+
 	}
+
 	if (changed & BSS_CHANGED_ERP_SLOT) {
 		if (bss_conf->use_short_slot)
 			ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT);
@@ -1036,6 +1535,17 @@
 		}
 	}
 
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		wl->basic_rate_set = wl1271_enabled_rates_get(
+			wl, bss_conf->basic_rates);
+
+		ret = wl1271_acx_rate_policies(wl, wl->basic_rate_set);
+		if (ret < 0) {
+			wl1271_warning("Set rate policies failed %d", ret);
+			goto out_sleep;
+		}
+	}
+
 out_sleep:
 	wl1271_ps_elp_sleep(wl);
 
@@ -1047,44 +1557,44 @@
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
 	{ .bitrate = 10,
-	  .hw_value = 0x1,
-	  .hw_value_short = 0x1, },
+	  .hw_value = CONF_HW_BIT_RATE_1MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_1MBPS, },
 	{ .bitrate = 20,
-	  .hw_value = 0x2,
-	  .hw_value_short = 0x2,
+	  .hw_value = CONF_HW_BIT_RATE_2MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_2MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 55,
-	  .hw_value = 0x4,
-	  .hw_value_short = 0x4,
+	  .hw_value = CONF_HW_BIT_RATE_5_5MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 110,
-	  .hw_value = 0x20,
-	  .hw_value_short = 0x20,
+	  .hw_value = CONF_HW_BIT_RATE_11MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_11MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 60,
-	  .hw_value = 0x8,
-	  .hw_value_short = 0x8, },
+	  .hw_value = CONF_HW_BIT_RATE_6MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_6MBPS, },
 	{ .bitrate = 90,
-	  .hw_value = 0x10,
-	  .hw_value_short = 0x10, },
+	  .hw_value = CONF_HW_BIT_RATE_9MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_9MBPS, },
 	{ .bitrate = 120,
-	  .hw_value = 0x40,
-	  .hw_value_short = 0x40, },
+	  .hw_value = CONF_HW_BIT_RATE_12MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_12MBPS, },
 	{ .bitrate = 180,
-	  .hw_value = 0x80,
-	  .hw_value_short = 0x80, },
+	  .hw_value = CONF_HW_BIT_RATE_18MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_18MBPS, },
 	{ .bitrate = 240,
-	  .hw_value = 0x200,
-	  .hw_value_short = 0x200, },
+	  .hw_value = CONF_HW_BIT_RATE_24MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_24MBPS, },
 	{ .bitrate = 360,
-	 .hw_value = 0x400,
-	 .hw_value_short = 0x400, },
+	 .hw_value = CONF_HW_BIT_RATE_36MBPS,
+	 .hw_value_short = CONF_HW_BIT_RATE_36MBPS, },
 	{ .bitrate = 480,
-	  .hw_value = 0x800,
-	  .hw_value_short = 0x800, },
+	  .hw_value = CONF_HW_BIT_RATE_48MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_48MBPS, },
 	{ .bitrate = 540,
-	  .hw_value = 0x1000,
-	  .hw_value_short = 0x1000, },
+	  .hw_value = CONF_HW_BIT_RATE_54MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
 };
 
 /* can't be const, mac80211 writes to this */
@@ -1112,6 +1622,88 @@
 	.n_bitrates = ARRAY_SIZE(wl1271_rates),
 };
 
+/* 5 GHz data rates for WL1273 */
+static struct ieee80211_rate wl1271_rates_5ghz[] = {
+	{ .bitrate = 60,
+	  .hw_value = CONF_HW_BIT_RATE_6MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_6MBPS, },
+	{ .bitrate = 90,
+	  .hw_value = CONF_HW_BIT_RATE_9MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_9MBPS, },
+	{ .bitrate = 120,
+	  .hw_value = CONF_HW_BIT_RATE_12MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_12MBPS, },
+	{ .bitrate = 180,
+	  .hw_value = CONF_HW_BIT_RATE_18MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_18MBPS, },
+	{ .bitrate = 240,
+	  .hw_value = CONF_HW_BIT_RATE_24MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_24MBPS, },
+	{ .bitrate = 360,
+	 .hw_value = CONF_HW_BIT_RATE_36MBPS,
+	 .hw_value_short = CONF_HW_BIT_RATE_36MBPS, },
+	{ .bitrate = 480,
+	  .hw_value = CONF_HW_BIT_RATE_48MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_48MBPS, },
+	{ .bitrate = 540,
+	  .hw_value = CONF_HW_BIT_RATE_54MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
+};
+
+/* 5 GHz band channels for WL1273 */
+static struct ieee80211_channel wl1271_channels_5ghz[] = {
+	{ .hw_value = 183, .center_freq = 4915},
+	{ .hw_value = 184, .center_freq = 4920},
+	{ .hw_value = 185, .center_freq = 4925},
+	{ .hw_value = 187, .center_freq = 4935},
+	{ .hw_value = 188, .center_freq = 4940},
+	{ .hw_value = 189, .center_freq = 4945},
+	{ .hw_value = 192, .center_freq = 4960},
+	{ .hw_value = 196, .center_freq = 4980},
+	{ .hw_value = 7, .center_freq = 5035},
+	{ .hw_value = 8, .center_freq = 5040},
+	{ .hw_value = 9, .center_freq = 5045},
+	{ .hw_value = 11, .center_freq = 5055},
+	{ .hw_value = 12, .center_freq = 5060},
+	{ .hw_value = 16, .center_freq = 5080},
+	{ .hw_value = 34, .center_freq = 5170},
+	{ .hw_value = 36, .center_freq = 5180},
+	{ .hw_value = 38, .center_freq = 5190},
+	{ .hw_value = 40, .center_freq = 5200},
+	{ .hw_value = 42, .center_freq = 5210},
+	{ .hw_value = 44, .center_freq = 5220},
+	{ .hw_value = 46, .center_freq = 5230},
+	{ .hw_value = 48, .center_freq = 5240},
+	{ .hw_value = 52, .center_freq = 5260},
+	{ .hw_value = 56, .center_freq = 5280},
+	{ .hw_value = 60, .center_freq = 5300},
+	{ .hw_value = 64, .center_freq = 5320},
+	{ .hw_value = 100, .center_freq = 5500},
+	{ .hw_value = 104, .center_freq = 5520},
+	{ .hw_value = 108, .center_freq = 5540},
+	{ .hw_value = 112, .center_freq = 5560},
+	{ .hw_value = 116, .center_freq = 5580},
+	{ .hw_value = 120, .center_freq = 5600},
+	{ .hw_value = 124, .center_freq = 5620},
+	{ .hw_value = 128, .center_freq = 5640},
+	{ .hw_value = 132, .center_freq = 5660},
+	{ .hw_value = 136, .center_freq = 5680},
+	{ .hw_value = 140, .center_freq = 5700},
+	{ .hw_value = 149, .center_freq = 5745},
+	{ .hw_value = 153, .center_freq = 5765},
+	{ .hw_value = 157, .center_freq = 5785},
+	{ .hw_value = 161, .center_freq = 5805},
+	{ .hw_value = 165, .center_freq = 5825},
+};
+
+
+static struct ieee80211_supported_band wl1271_band_5ghz = {
+	.channels = wl1271_channels_5ghz,
+	.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
+	.bitrates = wl1271_rates_5ghz,
+	.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
+};
+
 static const struct ieee80211_ops wl1271_ops = {
 	.start = wl1271_op_start,
 	.stop = wl1271_op_stop,
@@ -1119,6 +1711,7 @@
 	.remove_interface = wl1271_op_remove_interface,
 	.config = wl1271_op_config,
 /* 	.config_interface = wl1271_op_config_interface, */
+	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
 	.tx = wl1271_op_tx,
 	.set_key = wl1271_op_set_key,
@@ -1151,24 +1744,26 @@
 
 static int wl1271_init_ieee80211(struct wl1271 *wl)
 {
-	/*
-	 * The tx descriptor buffer and the TKIP space.
-	 *
-	 * FIXME: add correct 1271 descriptor size
-	 */
-	wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE;
+	/* The tx descriptor buffer and the TKIP space. */
+	wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE +
+		sizeof(struct wl1271_tx_hw_descr);
 
 	/* unit us */
 	/* FIXME: find a proper value */
 	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM;
+		IEEE80211_HW_NOISE_DBM |
+		IEEE80211_HW_BEACON_FILTER |
+		IEEE80211_HW_SUPPORTS_PS;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	wl->hw->wiphy->max_scan_ssids = 1;
 	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
 
+	if (wl1271_11a_enabled())
+		wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz;
+
 	SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
 
 	return 0;
@@ -1213,29 +1808,33 @@
 	wl = hw->priv;
 	memset(wl, 0, sizeof(*wl));
 
+	INIT_LIST_HEAD(&wl->list);
+
 	wl->hw = hw;
 	dev_set_drvdata(&spi->dev, wl);
 	wl->spi = spi;
 
 	skb_queue_head_init(&wl->tx_queue);
 
-	INIT_WORK(&wl->filter_work, wl1271_filter_work);
+	INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
 	wl->channel = WL1271_DEFAULT_CHANNEL;
 	wl->scanning = false;
 	wl->default_key = 0;
-	wl->listen_int = 1;
 	wl->rx_counter = 0;
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
 	wl->elp = false;
 	wl->psm = 0;
 	wl->psm_requested = false;
+	wl->psm_entry_retry = 0;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
+	wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+	wl->band = IEEE80211_BAND_2GHZ;
+	wl->vif = NULL;
+	wl->joined = false;
 
-	/* We use the default power on sleep time until we know which chip
-	 * we're using */
-	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
 
 	spin_lock_init(&wl->wl_lock);
@@ -1250,13 +1849,6 @@
 	wl->state = WL1271_STATE_OFF;
 	mutex_init(&wl->mutex);
 
-	wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
-	if (!wl->rx_descriptor) {
-		wl1271_error("could not allocate memory for rx descriptor");
-		ret = -ENOMEM;
-		goto out_free;
-	}
-
 	/* This is the only SPI value that we need to set here, the rest
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
@@ -1298,6 +1890,9 @@
 	}
 	dev_set_drvdata(&wl1271_device.dev, wl);
 
+	/* Apply default driver configuration. */
+	wl1271_conf_init(wl);
+
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
 		goto out_platform;
@@ -1319,9 +1914,6 @@
 	free_irq(wl->irq, wl);
 
  out_free:
-	kfree(wl->rx_descriptor);
-	wl->rx_descriptor = NULL;
-
 	ieee80211_free_hw(hw);
 
 	return ret;
@@ -1337,14 +1929,11 @@
 	platform_device_unregister(&wl1271_device);
 	free_irq(wl->irq, wl);
 	kfree(wl->target_mem_map);
-	kfree(wl->fw);
+	vfree(wl->fw);
 	wl->fw = NULL;
 	kfree(wl->nvs);
 	wl->nvs = NULL;
 
-	kfree(wl->rx_descriptor);
-	wl->rx_descriptor = NULL;
-
 	kfree(wl->fw_status);
 	kfree(wl->tx_res_if);
 
@@ -1391,3 +1980,5 @@
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
+MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
+MODULE_FIRMWARE(WL1271_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index 1dc74b0..507cd91 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -27,25 +27,38 @@
 
 #define WL1271_WAKEUP_TIMEOUT 500
 
+void wl1271_elp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct wl1271 *wl;
+
+	dwork = container_of(work, struct delayed_work, work);
+	wl = container_of(dwork, struct wl1271, elp_work);
+
+	wl1271_debug(DEBUG_PSM, "elp work");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->elp || !wl->psm)
+		goto out;
+
+	wl1271_debug(DEBUG_PSM, "chip to elp");
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+	wl->elp = true;
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+#define ELP_ENTRY_DELAY  5
+
 /* Routines to toggle sleep mode while in ELP */
 void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
-	/*
-	 * FIXME: due to a problem in the firmware (causing a firmware
-	 * crash), ELP entry is prevented below. Remove the "true" to
-	 * re-enable ELP entry.
-	 */
-	if (true || wl->elp || !wl->psm)
-		return;
-
-	/*
-	 * Go to ELP unless there is work already pending - pending work
-	 * will immediately wakeup the chipset anyway.
-	 */
-	if (!work_pending(&wl->irq_work) && !work_pending(&wl->tx_work)) {
-		wl1271_debug(DEBUG_PSM, "chip to elp");
-		wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
-		wl->elp = true;
+	if (wl->psm) {
+		cancel_delayed_work(&wl->elp_work);
+		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
+					msecs_to_jiffies(ELP_ENTRY_DELAY));
 	}
 }
 
@@ -73,7 +86,7 @@
 		wl->elp_compl = &compl;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
-	wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
 
 	if (!pending) {
 		ret = wait_for_completion_timeout(
@@ -111,6 +124,17 @@
 	switch (mode) {
 	case STATION_POWER_SAVE_MODE:
 		wl1271_debug(DEBUG_PSM, "entering psm");
+
+		/* enable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, true);
+		if (ret < 0)
+			return ret;
+
+		/* enable beacon early termination */
+		ret = wl1271_acx_bet_enable(wl, true);
+		if (ret < 0)
+			return ret;
+
 		ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
 		if (ret < 0)
 			return ret;
@@ -128,6 +152,16 @@
 		if (ret < 0)
 			return ret;
 
+		/* disable beacon early termination */
+		ret = wl1271_acx_bet_enable(wl, false);
+		if (ret < 0)
+			return ret;
+
+		/* disable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, false);
+		if (ret < 0)
+			return ret;
+
 		ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
 		if (ret < 0)
 			return ret;
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.h b/drivers/net/wireless/wl12xx/wl1271_ps.h
index de2bd3c..779653d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.h
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.h
@@ -30,6 +30,6 @@
 int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode);
 void wl1271_ps_elp_sleep(struct wl1271 *wl);
 int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake);
-
+void wl1271_elp_work(struct work_struct *work);
 
 #endif /* __WL1271_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h
index f8ed4a4..1f23738 100644
--- a/drivers/net/wireless/wl12xx/wl1271_reg.h
+++ b/drivers/net/wireless/wl12xx/wl1271_reg.h
@@ -34,7 +34,7 @@
 #define REGISTERS_WORK_SIZE 0x0000b000
 
 #define HW_ACCESS_ELP_CTRL_REG_ADDR         0x1FFFC
-#define STATUS_MEM_ADDRESS                  0x40400
+#define FW_STATUS_ADDR                      (0x14FC0 + 0xA000)
 
 /* ELP register commands */
 #define ELPCTRL_WAKE_UP             0x1
@@ -213,7 +213,6 @@
 ==============================================*/
 #define ACX_REG_INTERRUPT_ACK          (REGISTERS_BASE + 0x04F0)
 
-#define RX_DRIVER_DUMMY_WRITE_ADDRESS  (REGISTERS_BASE + 0x0534)
 #define RX_DRIVER_COUNTER_ADDRESS      (REGISTERS_BASE + 0x0538)
 
 /* Device Configuration registers*/
@@ -614,50 +613,6 @@
 	MAX_RADIO_BANDS = 0xFF
 };
 
-enum {
-	NO_RATE      = 0,
-	RATE_1MBPS   = 0x0A,
-	RATE_2MBPS   = 0x14,
-	RATE_5_5MBPS = 0x37,
-	RATE_6MBPS   = 0x0B,
-	RATE_9MBPS   = 0x0F,
-	RATE_11MBPS  = 0x6E,
-	RATE_12MBPS  = 0x0A,
-	RATE_18MBPS  = 0x0E,
-	RATE_22MBPS  = 0xDC,
-	RATE_24MBPS  = 0x09,
-	RATE_36MBPS  = 0x0D,
-	RATE_48MBPS  = 0x08,
-	RATE_54MBPS  = 0x0C
-};
-
-enum {
-	RATE_INDEX_1MBPS   =  0,
-	RATE_INDEX_2MBPS   =  1,
-	RATE_INDEX_5_5MBPS =  2,
-	RATE_INDEX_6MBPS   =  3,
-	RATE_INDEX_9MBPS   =  4,
-	RATE_INDEX_11MBPS  =  5,
-	RATE_INDEX_12MBPS  =  6,
-	RATE_INDEX_18MBPS  =  7,
-	RATE_INDEX_22MBPS  =  8,
-	RATE_INDEX_24MBPS  =  9,
-	RATE_INDEX_36MBPS  =  10,
-	RATE_INDEX_48MBPS  =  11,
-	RATE_INDEX_54MBPS  =  12,
-	RATE_INDEX_MAX     =  RATE_INDEX_54MBPS,
-	MAX_RATE_INDEX,
-	INVALID_RATE_INDEX = MAX_RATE_INDEX,
-	RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
-};
-
-enum {
-	RATE_MASK_1MBPS = 0x1,
-	RATE_MASK_2MBPS = 0x2,
-	RATE_MASK_5_5MBPS = 0x4,
-	RATE_MASK_11MBPS = 0x20,
-};
-
 #define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
 #define OFDM_RATE_BIT        BIT(6)
 #define PBCC_RATE_BIT        BIT(7)
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index ad8b690..ca645f3 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -30,14 +30,15 @@
 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
 				  u32 drv_rx_counter)
 {
-	return status->rx_pkt_descs[drv_rx_counter] & RX_MEM_BLOCK_MASK;
+	return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
+		RX_MEM_BLOCK_MASK;
 }
 
 static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
 				 u32 drv_rx_counter)
 {
-	return (status->rx_pkt_descs[drv_rx_counter] & RX_BUF_SIZE_MASK) >>
-		RX_BUF_SIZE_SHIFT_DIV;
+	return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
+		RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
 }
 
 /* The values of this table must match the wl1271_rates[] array */
@@ -70,6 +71,36 @@
 	0                           /* WL1271_RATE_1    */
 };
 
+/* The values of this table must match the wl1271_rates[] array */
+static u8 wl1271_5_ghz_rx_rate_to_idx[] = {
+	/* MCS rates are used only with 11n */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */
+
+	7,                          /* WL1271_RATE_54   */
+	6,                          /* WL1271_RATE_48   */
+	5,                          /* WL1271_RATE_36   */
+	4,                          /* WL1271_RATE_24   */
+
+	/* TI-specific rate */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22   */
+
+	3,                          /* WL1271_RATE_18   */
+	2,                          /* WL1271_RATE_12   */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_11   */
+	1,                          /* WL1271_RATE_9    */
+	0,                          /* WL1271_RATE_6    */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_5_5  */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_2    */
+	WL1271_RX_RATE_UNSUPPORTED  /* WL1271_RATE_1    */
+};
+
 static void wl1271_rx_status(struct wl1271 *wl,
 			     struct wl1271_rx_descriptor *desc,
 			     struct ieee80211_rx_status *status,
@@ -77,12 +108,21 @@
 {
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
-	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
+	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) ==
+	    WL1271_RX_DESC_BAND_BG) {
 		status->band = IEEE80211_BAND_2GHZ;
-	else
+		status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
+	} else if ((desc->flags & WL1271_RX_DESC_BAND_MASK) ==
+		 WL1271_RX_DESC_BAND_A) {
+		status->band = IEEE80211_BAND_5GHZ;
+		status->rate_idx = wl1271_5_ghz_rx_rate_to_idx[desc->rate];
+	} else
 		wl1271_warning("unsupported band 0x%x",
 			       desc->flags & WL1271_RX_DESC_BAND_MASK);
 
+	if (unlikely(status->rate_idx == WL1271_RX_RATE_UNSUPPORTED))
+		wl1271_warning("unsupported rate");
+
 	/*
 	 * FIXME: Add mactime handling.  For IBSS (ad-hoc) we need to get the
 	 * timestamp from the beacon (acx_tsf_info).  In BSS mode (infra) we
@@ -91,12 +131,6 @@
 	 */
 	status->signal = desc->rssi;
 
-	/* FIXME: Should this be optimized? */
-	status->qual = (desc->rssi - WL1271_RX_MIN_RSSI) * 100 /
-		(WL1271_RX_MAX_RSSI - WL1271_RX_MIN_RSSI);
-	status->qual = min(status->qual, 100);
-	status->qual = max(status->qual, 0);
-
 	/*
 	 * FIXME: In wl1251, the SNR should be divided by two.  In wl1271 we
 	 * need to divide by two for now, but TI has been discussing about
@@ -109,17 +143,11 @@
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
 		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
 
-		if (likely(!(desc->flags & WL1271_RX_DESC_DECRYPT_FAIL)))
+		if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
 			status->flag |= RX_FLAG_DECRYPTED;
-
-		if (unlikely(desc->flags & WL1271_RX_DESC_MIC_FAIL))
+		if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
 			status->flag |= RX_FLAG_MMIC_ERROR;
 	}
-
-	status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
-
-	if (status->rate_idx == WL1271_RX_RATE_UNSUPPORTED)
-		wl1271_warning("unsupported rate");
 }
 
 static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
@@ -131,14 +159,14 @@
 	u8 *buf;
 	u8 beacon = 0;
 
-	skb = dev_alloc_skb(length);
+	skb = __dev_alloc_skb(length, GFP_KERNEL);
 	if (!skb) {
 		wl1271_error("Couldn't allocate RX frame");
 		return;
 	}
 
 	buf = skb_put(skb, length);
-	wl1271_spi_reg_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
+	wl1271_spi_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
 
 	/* the data read starts with the descriptor */
 	desc = (struct wl1271_rx_descriptor *) buf;
@@ -156,7 +184,7 @@
 		     beacon ? "beacon" : "");
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
-	ieee80211_rx(wl->hw, skb);
+	ieee80211_rx_ni(wl->hw, skb);
 }
 
 void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
@@ -176,15 +204,15 @@
 			break;
 		}
 
-		wl->rx_mem_pool_addr.addr =
-			(mem_block << 8) + wl_mem_map->packet_memory_pool_start;
+		wl->rx_mem_pool_addr.addr = (mem_block << 8) +
+			le32_to_cpu(wl_mem_map->packet_memory_pool_start);
 		wl->rx_mem_pool_addr.addr_extra =
 			wl->rx_mem_pool_addr.addr + 4;
 
 		/* Choose the block we want to read */
-		wl1271_spi_reg_write(wl, WL1271_SLV_REG_DATA,
-				     &wl->rx_mem_pool_addr,
-				     sizeof(wl->rx_mem_pool_addr), false);
+		wl1271_spi_write(wl, WL1271_SLV_REG_DATA,
+				 &wl->rx_mem_pool_addr,
+				 sizeof(wl->rx_mem_pool_addr), false);
 
 		wl1271_rx_handle_data(wl, buf_size);
 
@@ -192,9 +220,5 @@
 		drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
 	}
 
-	wl1271_reg_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
-
-	/* This is a workaround for some problems in the chip */
-	wl1271_reg_write32(wl, RX_DRIVER_DUMMY_WRITE_ADDRESS, 0x1);
-
+	wl1271_spi_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.h b/drivers/net/wireless/wl12xx/wl1271_rx.h
index d1ca60e..1ae6d17 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.h
@@ -102,14 +102,14 @@
 #define RX_BUF_SIZE_SHIFT_DIV 6
 
 struct wl1271_rx_descriptor {
-	u16 length;
+	__le16 length;
 	u8  status;
 	u8  flags;
 	u8  rate;
 	u8  channel;
 	s8  rssi;
 	u8  snr;
-	u32 timestamp;
+	__le32 timestamp;
 	u8  packet_class;
 	u8  process_id;
 	u8  pad_len;
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 4a12880..02978a1 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -30,17 +30,29 @@
 #include "wl12xx_80211.h"
 #include "wl1271_spi.h"
 
-static int wl1271_translate_reg_addr(struct wl1271 *wl, int addr)
+static int wl1271_translate_addr(struct wl1271 *wl, int addr)
 {
-	return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+	/*
+	 * To translate, first check to which window of addresses the
+	 * particular address belongs. Then subtract the starting address
+	 * of that window from the address. Then, add offset of the
+	 * translated region.
+	 *
+	 * The translated regions occur next to each other in physical device
+	 * memory, so just add the sizes of the preceeding address regions to
+	 * get the offset to the new region.
+	 *
+	 * Currently, only the two first regions are addressed, and the
+	 * assumption is that all addresses will fall into either of those
+	 * two.
+	 */
+	if ((addr >= wl->part.reg.start) &&
+	    (addr < wl->part.reg.start + wl->part.reg.size))
+		return addr - wl->part.reg.start + wl->part.mem.size;
+	else
+		return addr - wl->part.mem.start;
 }
 
-static int wl1271_translate_mem_addr(struct wl1271 *wl, int addr)
-{
-	return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
-}
-
-
 void wl1271_spi_reset(struct wl1271 *wl)
 {
 	u8 *cmd;
@@ -123,133 +135,137 @@
 
 /* Set the SPI partitions to access the chip addresses
  *
- * There are two VIRTUAL (SPI) partitions (the memory partition and the
- * registers partition), which are mapped to two different areas of the
- * PHYSICAL (hardware) memory.  This function also makes other checks to
- * ensure that the partitions are not overlapping.  In the diagram below, the
- * memory partition comes before the register partition, but the opposite is
- * also supported.
+ * To simplify driver code, a fixed (virtual) memory map is defined for
+ * register and memory addresses. Because in the chipset, in different stages
+ * of operation, those addresses will move around, an address translation
+ * mechanism is required.
  *
- *                               PHYSICAL address
+ * There are four partitions (three memory and one register partition),
+ * which are mapped to two different areas of the hardware memory.
+ *
+ *                                Virtual address
  *                                     space
  *
  *                                    |    |
- *                                 ...+----+--> mem_start
- *          VIRTUAL address     ...   |    |
+ *                                 ...+----+--> mem.start
+ *          Physical address    ...   |    |
  *               space       ...      |    | [PART_0]
  *                        ...         |    |
- * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
+ *  00000000  <--+----+...         ...+----+--> mem.start + mem.size
  *               |    |         ...   |    |
  *               |MEM |      ...      |    |
  *               |    |   ...         |    |
- *  part_size <--+----+...            |    | {unused area)
+ *  mem.size  <--+----+...            |    | {unused area)
  *               |    |   ...         |    |
  *               |REG |      ...      |    |
- *  part_size    |    |         ...   |    |
- *      +     <--+----+...         ...+----+--> reg_start
- *  reg_size              ...         |    |
- *                           ...      |    | [PART_1]
- *                              ...   |    |
- *                                 ...+----+--> reg_start + reg_size
+ *  mem.size     |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg.start
+ *  reg.size     |    |   ...         |    |
+ *               |MEM2|      ...      |    | [PART_1]
+ *               |    |         ...   |    |
+ *                                 ...+----+--> reg.start + reg.size
  *                                    |    |
  *
  */
 int wl1271_set_partition(struct wl1271 *wl,
-			  u32 mem_start, u32 mem_size,
-			  u32 reg_start, u32 reg_size)
+			 struct wl1271_partition_set *p)
 {
-	struct wl1271_partition *partition;
-	struct spi_transfer t;
-	struct spi_message m;
-	size_t len, cmd_len;
-	u32 *cmd;
-	int addr;
-
-	cmd_len = sizeof(u32) + 2 * sizeof(struct wl1271_partition);
-	cmd = kzalloc(cmd_len, GFP_KERNEL);
-	if (!cmd)
-		return -ENOMEM;
-
-	spi_message_init(&m);
-	memset(&t, 0, sizeof(t));
-
-	partition = (struct wl1271_partition *) (cmd + 1);
-	addr = HW_ACCESS_PART0_SIZE_ADDR;
-	len = 2 * sizeof(struct wl1271_partition);
-
-	*cmd |= WSPI_CMD_WRITE;
-	*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
-	*cmd |= addr & WSPI_CMD_BYTE_ADDR;
+	/* copy partition info */
+	memcpy(&wl->part, p, sizeof(*p));
 
 	wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-		     mem_start, mem_size);
+		     p->mem.start, p->mem.size);
 	wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-		     reg_start, reg_size);
+		     p->reg.start, p->reg.size);
+	wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
+		     p->mem2.start, p->mem2.size);
+	wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
+		     p->mem3.start, p->mem3.size);
 
-	/* Make sure that the two partitions together don't exceed the
-	 * address range */
-	if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
-		wl1271_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
-			     " address range.  Truncating partition[0].");
-		mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
-		wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-			     mem_start, mem_size);
-		wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-			     reg_start, reg_size);
-	}
-
-	if ((mem_start < reg_start) &&
-	    ((mem_start + mem_size) > reg_start)) {
-		/* Guarantee that the memory partition doesn't overlap the
-		 * registers partition */
-		wl1271_debug(DEBUG_SPI, "End of partition[0] is "
-			     "overlapping partition[1].  Adjusted.");
-		mem_size = reg_start - mem_start;
-		wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-			     mem_start, mem_size);
-		wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-			     reg_start, reg_size);
-	} else if ((reg_start < mem_start) &&
-		   ((reg_start + reg_size) > mem_start)) {
-		/* Guarantee that the register partition doesn't overlap the
-		 * memory partition */
-		wl1271_debug(DEBUG_SPI, "End of partition[1] is"
-			     " overlapping partition[0].  Adjusted.");
-		reg_size = mem_start - reg_start;
-		wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-			     mem_start, mem_size);
-		wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-			     reg_start, reg_size);
-	}
-
-	partition[0].start = mem_start;
-	partition[0].size  = mem_size;
-	partition[1].start = reg_start;
-	partition[1].size  = reg_size;
-
-	wl->physical_mem_addr = mem_start;
-	wl->physical_reg_addr = reg_start;
-
-	wl->virtual_mem_addr = 0;
-	wl->virtual_reg_addr = mem_size;
-
-	t.tx_buf = cmd;
-	t.len = cmd_len;
-	spi_message_add_tail(&t, &m);
-
-	spi_sync(wl->spi, &m);
-
-	kfree(cmd);
+	/* write partition info to the chipset */
+	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
 
 	return 0;
 }
 
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf,
-		     size_t len, bool fixed)
+#define WL1271_BUSY_WORD_TIMEOUT 1000
+
+/* FIXME: Check busy words, removed due to SPI bug */
+#if 0
+static void wl1271_spi_read_busy(struct wl1271 *wl, void *buf, size_t len)
+{
+	struct spi_transfer t[1];
+	struct spi_message m;
+	u32 *busy_buf;
+	int num_busy_bytes = 0;
+
+	wl1271_info("spi read BUSY!");
+
+	/*
+	 * Look for the non-busy word in the read buffer, and if found,
+	 * read in the remaining data into the buffer.
+	 */
+	busy_buf = (u32 *)buf;
+	for (; (u32)busy_buf < (u32)buf + len; busy_buf++) {
+		num_busy_bytes += sizeof(u32);
+		if (*busy_buf & 0x1) {
+			spi_message_init(&m);
+			memset(t, 0, sizeof(t));
+			memmove(buf, busy_buf, len - num_busy_bytes);
+			t[0].rx_buf = buf + (len - num_busy_bytes);
+			t[0].len = num_busy_bytes;
+			spi_message_add_tail(&t[0], &m);
+			spi_sync(wl->spi, &m);
+			return;
+		}
+	}
+
+	/*
+	 * Read further busy words from SPI until a non-busy word is
+	 * encountered, then read the data itself into the buffer.
+	 */
+	wl1271_info("spi read BUSY-polling needed!");
+
+	num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
+	busy_buf = wl->buffer_busyword;
+	while (num_busy_bytes) {
+		num_busy_bytes--;
+		spi_message_init(&m);
+		memset(t, 0, sizeof(t));
+		t[0].rx_buf = busy_buf;
+		t[0].len = sizeof(u32);
+		spi_message_add_tail(&t[0], &m);
+		spi_sync(wl->spi, &m);
+
+		if (*busy_buf & 0x1) {
+			spi_message_init(&m);
+			memset(t, 0, sizeof(t));
+			t[0].rx_buf = buf;
+			t[0].len = len;
+			spi_message_add_tail(&t[0], &m);
+			spi_sync(wl->spi, &m);
+			return;
+		}
+	}
+
+	/* The SPI bus is unresponsive, the read failed. */
+	memset(buf, 0, len);
+	wl1271_error("SPI read busy-word timeout!\n");
+}
+#endif
+
+void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
+			 size_t len, bool fixed)
 {
 	struct spi_transfer t[3];
 	struct spi_message m;
-	u8 *busy_buf;
+	u32 *busy_buf;
 	u32 *cmd;
 
 	cmd = &wl->buffer_cmd;
@@ -281,14 +297,16 @@
 
 	spi_sync(wl->spi, &m);
 
-	/* FIXME: check busy words */
+	/* FIXME: Check busy words, removed due to SPI bug */
+	/* if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1))
+	   wl1271_spi_read_busy(wl, buf, len); */
 
 	wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
 	wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
 }
 
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
-		      size_t len, bool fixed)
+void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
+			  size_t len, bool fixed)
 {
 	struct spi_transfer t[2];
 	struct spi_message m;
@@ -321,62 +339,77 @@
 	wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
 }
 
-void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf,
-			 size_t len)
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed)
 {
 	int physical;
 
-	physical = wl1271_translate_mem_addr(wl, addr);
+	physical = wl1271_translate_addr(wl, addr);
 
-	wl1271_spi_read(wl, physical, buf, len, false);
+	wl1271_spi_raw_read(wl, physical, buf, len, fixed);
 }
 
-void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf,
-			  size_t len)
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		      bool fixed)
 {
 	int physical;
 
-	physical = wl1271_translate_mem_addr(wl, addr);
+	physical = wl1271_translate_addr(wl, addr);
 
-	wl1271_spi_write(wl, physical, buf, len, false);
+	wl1271_spi_raw_write(wl, physical, buf, len, fixed);
 }
 
-void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-			 bool fixed)
+u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
 {
-	int physical;
-
-	physical = wl1271_translate_reg_addr(wl, addr);
-
-	wl1271_spi_read(wl, physical, buf, len, fixed);
+	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
 }
 
-void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-			  bool fixed)
+void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
 {
-	int physical;
-
-	physical = wl1271_translate_reg_addr(wl, addr);
-
-	wl1271_spi_write(wl, physical, buf, len, fixed);
+	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
 }
 
-u32 wl1271_mem_read32(struct wl1271 *wl, int addr)
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 {
-	return wl1271_read32(wl, wl1271_translate_mem_addr(wl, addr));
+	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
+	addr = (addr >> 1) + 0x30000;
+	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+
+	/* write value to OCP_POR_WDATA */
+	wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
+
+	/* write 1 to OCP_CMD */
+	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
 }
 
-void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val)
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
 {
-	wl1271_write32(wl, wl1271_translate_mem_addr(wl, addr), val);
-}
+	u32 val;
+	int timeout = OCP_CMD_LOOP;
 
-u32 wl1271_reg_read32(struct wl1271 *wl, int addr)
-{
-	return wl1271_read32(wl, wl1271_translate_reg_addr(wl, addr));
-}
+	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
+	addr = (addr >> 1) + 0x30000;
+	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
 
-void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val)
-{
-	wl1271_write32(wl, wl1271_translate_reg_addr(wl, addr), val);
+	/* write 2 to OCP_CMD */
+	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
+
+	/* poll for data ready */
+	do {
+		val = wl1271_spi_read32(wl, OCP_DATA_READ);
+		timeout--;
+	} while (!(val & OCP_READY_MASK) && timeout);
+
+	if (!timeout) {
+		wl1271_warning("Top register access timed out.");
+		return 0xffff;
+	}
+
+	/* check data status and return if OK */
+	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
+		return val & 0xffff;
+	else {
+		wl1271_warning("Top register access returned error.");
+		return 0xffff;
+	}
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h
index 2c99684..cb7df1c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.h
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.h
@@ -29,10 +29,14 @@
 
 #define HW_ACCESS_MEMORY_MAX_RANGE		0x1FFC0
 
-#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
-#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
-#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
-#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
+#define HW_PARTITION_REGISTERS_ADDR         0x1ffc0
+#define HW_PART0_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR)
+#define HW_PART0_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 4)
+#define HW_PART1_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR + 8)
+#define HW_PART1_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 12)
+#define HW_PART2_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR + 16)
+#define HW_PART2_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 20)
+#define HW_PART3_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 24)
 
 #define HW_ACCESS_REGISTER_SIZE             4
 
@@ -67,47 +71,56 @@
 		((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
 #define HW_ACCESS_WSPI_INIT_CMD_MASK  0
 
+#define OCP_CMD_LOOP  32
+
+#define OCP_CMD_WRITE 0x1
+#define OCP_CMD_READ  0x2
+
+#define OCP_READY_MASK  BIT(18)
+#define OCP_STATUS_MASK (BIT(16) | BIT(17))
+
+#define OCP_STATUS_NO_RESP    0x00000
+#define OCP_STATUS_OK         0x10000
+#define OCP_STATUS_REQ_FAILED 0x20000
+#define OCP_STATUS_RESP_ERROR 0x30000
 
 /* Raw target IO, address is not translated */
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
+void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 		      size_t len, bool fixed);
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf,
+void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
 		     size_t len, bool fixed);
 
-/* Memory target IO, address is tranlated to partition 0 */
-void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf, size_t len);
-void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf, size_t len);
-u32 wl1271_mem_read32(struct wl1271 *wl, int addr);
-void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val);
+/* Translated target IO */
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed);
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		      bool fixed);
+u32 wl1271_spi_read32(struct wl1271 *wl, int addr);
+void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val);
 
-/* Registers IO */
-void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-			 bool fixed);
-void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-			  bool fixed);
-u32 wl1271_reg_read32(struct wl1271 *wl, int addr);
-void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val);
+/* Top Register IO */
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
 
 /* INIT and RESET words */
 void wl1271_spi_reset(struct wl1271 *wl);
 void wl1271_spi_init(struct wl1271 *wl);
 int wl1271_set_partition(struct wl1271 *wl,
-			 u32 part_start, u32 part_size,
-			 u32 reg_start,  u32 reg_size);
+			 struct wl1271_partition_set *p);
 
-static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
+static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 {
-	wl1271_spi_read(wl, addr, &wl->buffer_32,
-			sizeof(wl->buffer_32), false);
+	wl1271_spi_raw_read(wl, addr, &wl->buffer_32,
+			    sizeof(wl->buffer_32), false);
 
 	return wl->buffer_32;
 }
 
-static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
+static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 {
 	wl->buffer_32 = val;
-	wl1271_spi_write(wl, addr, &wl->buffer_32,
-			 sizeof(wl->buffer_32), false);
+	wl1271_spi_raw_write(wl, addr, &wl->buffer_32,
+			     sizeof(wl->buffer_32), false);
 }
 
 #endif /* __WL1271_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index ff22125..00af065 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -33,8 +33,7 @@
 static int wl1271_tx_id(struct wl1271 *wl, struct sk_buff *skb)
 {
 	int i;
-
-	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		if (wl->tx_frames[i] == NULL) {
 			wl->tx_frames[i] = skb;
 			return i;
@@ -58,8 +57,8 @@
 	/* approximate the number of blocks required for this packet
 	   in the firmware */
 	/* FIXME: try to figure out what is done here and make it cleaner */
-	total_blocks = (skb->len) >> TX_HW_BLOCK_SHIFT_DIV;
-	excluded = (total_blocks << 2) + (skb->len & 0xff) + 34;
+	total_blocks = (total_len + 20) >> TX_HW_BLOCK_SHIFT_DIV;
+	excluded = (total_blocks << 2) + ((total_len + 20) & 0xff) + 34;
 	total_blocks += (excluded > 252) ? 2 : 1;
 	total_blocks += TX_HW_BLOCK_SPARE;
 
@@ -89,15 +88,25 @@
 {
 	struct wl1271_tx_hw_descr *desc;
 	int pad;
+	u16 tx_attr;
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
 
+	/* relocate space for security header */
+	if (extra) {
+		void *framestart = skb->data + sizeof(*desc);
+		u16 fc = *(u16 *)(framestart + extra);
+		int hdrlen = ieee80211_hdrlen(cpu_to_le16(fc));
+		memmove(framestart, framestart + extra, hdrlen);
+	}
+
 	/* configure packet life time */
-	desc->start_time = jiffies_to_usecs(jiffies) - wl->time_offset;
-	desc->life_time = TX_HW_MGMT_PKT_LIFETIME_TU;
+	desc->start_time = cpu_to_le32(jiffies_to_usecs(jiffies) -
+				       wl->time_offset);
+	desc->life_time = cpu_to_le16(TX_HW_MGMT_PKT_LIFETIME_TU);
 
 	/* configure the tx attributes */
-	desc->tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
+	tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
 	/* FIXME: do we know the packet priority? can we identify mgmt
 	   packets, and use max prio for them at least? */
 	desc->tid = 0;
@@ -106,11 +115,13 @@
 
 	/* align the length (and store in terms of words) */
 	pad = WL1271_TX_ALIGN(skb->len);
-	desc->length = pad >> 2;
+	desc->length = cpu_to_le16(pad >> 2);
 
 	/* calculate number of padding bytes */
 	pad = pad - skb->len;
-	desc->tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+	tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+
+	desc->tx_attr = cpu_to_le16(tx_attr);
 
 	wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
 	return 0;
@@ -147,11 +158,11 @@
 	len = WL1271_TX_ALIGN(skb->len);
 
 	/* perform a fixed address block write with the packet */
-	wl1271_spi_reg_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
+	wl1271_spi_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
 
 	/* write packet new counter into the write access register */
 	wl->tx_packets_count++;
-	wl1271_reg_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
+	wl1271_spi_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
 	wl1271_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u (%u words)",
@@ -254,14 +265,13 @@
 static void wl1271_tx_complete_packet(struct wl1271 *wl,
 				      struct wl1271_tx_hw_res_descr *result)
 {
-
 	struct ieee80211_tx_info *info;
 	struct sk_buff *skb;
-	u32 header_len;
+	u16 seq;
 	int id = result->id;
 
 	/* check for id legality */
-	if (id >= TX_HW_RESULT_QUEUE_LEN || wl->tx_frames[id] == NULL) {
+	if (id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL) {
 		wl1271_warning("TX result illegal id: %d", id);
 		return;
 	}
@@ -284,22 +294,32 @@
 	/* info->status.retry_count = result->ack_failures; */
 	wl->stats.retry_count += result->ack_failures;
 
-	/* get header len */
+	/* update security sequence number */
+	seq = wl->tx_security_seq_16 +
+		(result->lsb_security_sequence_number -
+		 wl->tx_security_last_seq);
+	wl->tx_security_last_seq = result->lsb_security_sequence_number;
+
+	if (seq < wl->tx_security_seq_16)
+		wl->tx_security_seq_32++;
+	wl->tx_security_seq_16 = seq;
+
+	/* remove private header from packet */
+	skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
+
+	/* remove TKIP header space if present */
 	if (info->control.hw_key &&
-	    info->control.hw_key->alg == ALG_TKIP)
-		header_len = WL1271_TKIP_IV_SPACE +
-			sizeof(struct wl1271_tx_hw_descr);
-	else
-		header_len = sizeof(struct wl1271_tx_hw_descr);
+	    info->control.hw_key->alg == ALG_TKIP) {
+		int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+		memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data, hdrlen);
+		skb_pull(skb, WL1271_TKIP_IV_SPACE);
+	}
 
 	wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
 		     " status 0x%x",
 		     result->id, skb, result->ack_failures,
 		     result->rate_class_index, result->status);
 
-	/* remove private header from packet */
-	skb_pull(skb, header_len);
-
 	/* return the packet to the stack */
 	ieee80211_tx_status(wl->hw, skb);
 	wl->tx_frames[result->id] = NULL;
@@ -315,8 +335,8 @@
 	wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
 
 	/* read the tx results from the chipset */
-	wl1271_spi_mem_read(wl, memmap->tx_result,
-			    wl->tx_res_if, sizeof(*wl->tx_res_if));
+	wl1271_spi_read(wl, le32_to_cpu(memmap->tx_result),
+			wl->tx_res_if, sizeof(*wl->tx_res_if), false);
 
 	/* verify that the result buffer is not getting overrun */
 	if (count > TX_HW_RESULT_QUEUE_LEN) {
@@ -337,10 +357,10 @@
 	}
 
 	/* write host counter to chipset (to ack) */
-	wl1271_mem_write32(wl, memmap->tx_result +
+	wl1271_spi_write32(wl, le32_to_cpu(memmap->tx_result) +
 			   offsetof(struct wl1271_tx_hw_res_if,
 				    tx_result_host_counter),
-			   wl->tx_res_if->tx_result_fw_counter);
+			   le32_to_cpu(wl->tx_res_if->tx_result_fw_counter));
 }
 
 /* caller must hold wl->mutex */
@@ -364,7 +384,7 @@
 		ieee80211_tx_status(wl->hw, skb);
 	}
 
-	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		if (wl->tx_frames[i] != NULL) {
 			skb = wl->tx_frames[i];
 			info = IEEE80211_SKB_CB(skb);
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h
index 4a61406..416396c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.h
@@ -58,7 +58,7 @@
 
 struct wl1271_tx_hw_descr {
 	/* Length of packet in words, including descriptor+header+data */
-	u16 length;
+	__le16 length;
 	/* Number of extra memory blocks to allocate for this packet in
 	   addition to the number of blocks derived from the packet length */
 	u8 extra_mem_blocks;
@@ -67,12 +67,12 @@
 	   HW!! */
 	u8 total_mem_blocks;
 	/* Device time (in us) when the packet arrived to the driver */
-	u32 start_time;
+	__le32 start_time;
 	/* Max delay in TUs until transmission. The last device time the
 	   packet can be transmitted is: startTime+(1024*LifeTime) */
-	u16 life_time;
+	__le16 life_time;
 	/* Bitwise fields - see TX_ATTR... definitions above. */
-	u16 tx_attr;
+	__le16 tx_attr;
 	/* Packet identifier used also in the Tx-Result. */
 	u8 id;
 	/* The packet TID value (as User-Priority) */
@@ -100,12 +100,12 @@
 	   several possible reasons for failure. */
 	u8 status;
 	/* Total air access duration including all retrys and overheads.*/
-	u16 medium_usage;
+	__le16 medium_usage;
 	/* The time passed from host xfer to Tx-complete.*/
-	u32 fw_handling_time;
+	__le32 fw_handling_time;
 	/* Total media delay
 	   (from 1st EDCA AIFS counter until TX Complete). */
-	u32 medium_delay;
+	__le32 medium_delay;
 	/* LS-byte of last TKIP seq-num (saved per AC for recovery). */
 	u8 lsb_security_sequence_number;
 	/* Retry count - number of transmissions without successful ACK.*/
@@ -118,8 +118,8 @@
 } __attribute__ ((packed));
 
 struct wl1271_tx_hw_res_if {
-	u32 tx_result_fw_counter;
-	u32 tx_result_host_counter;
+	__le32 tx_result_fw_counter;
+	__le32 tx_result_host_counter;
 	struct wl1271_tx_hw_res_descr tx_results_queue[TX_HW_RESULT_QUEUE_LEN];
 } __attribute__ ((packed));
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
index 657c2db..055d7bc 100644
--- a/drivers/net/wireless/wl12xx/wl12xx_80211.h
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -122,8 +122,8 @@
 } __attribute__ ((packed));
 
 struct wl12xx_ps_poll_template {
-	u16 fc;
-	u16 aid;
+	__le16 fc;
+	__le16 aid;
 	u8 bssid[ETH_ALEN];
 	u8 ta[ETH_ALEN];
 } __attribute__ ((packed));
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 4f1e0cfe6..7b9621d 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -67,23 +67,7 @@
 /* For rough constant delay */
 #define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
 
-/*
- * All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If you do not
- * define PCMCIA_DEBUG at all, all the debug code will be left out.  If you
- * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
- * but it can then be enabled for specific modules at load time with a
- * 'pc_debug=#' option to insmod.
- */
-#define PCMCIA_DEBUG 0
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define dprintk(n, format, args...) \
-	{ if (pc_debug > (n)) \
-		printk(KERN_INFO "%s: " format "\n", __func__ , ##args); }
-#else
-#define dprintk(n, format, args...)
-#endif
+
 
 #define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
 #define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
@@ -381,7 +365,7 @@
 
 static int wl3501_esbq_req_test(struct wl3501_card *this)
 {
-	u8 tmp;
+	u8 tmp = 0;
 
 	wl3501_get_from_wla(this, this->esbq_req_head + 3, &tmp, sizeof(tmp));
 	return tmp & 0x80;
@@ -684,10 +668,10 @@
 	int matchflag = 0;
 	struct wl3501_scan_confirm sig;
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 	if (sig.status == WL3501_STATUS_SUCCESS) {
-		dprintk(3, "success");
+		pr_debug("success");
 		if ((this->net_type == IW_MODE_INFRA &&
 		     (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
 		    (this->net_type == IW_MODE_ADHOC &&
@@ -722,7 +706,7 @@
 			}
 		}
 	} else if (sig.status == WL3501_STATUS_TIMEOUT) {
-		dprintk(3, "timeout");
+		pr_debug("timeout");
 		this->join_sta_bss = 0;
 		for (i = this->join_sta_bss; i < this->bss_cnt; i++)
 			if (!wl3501_mgmt_join(this, i))
@@ -879,7 +863,7 @@
 		.timeout = 1000,
 	};
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
 	return wl3501_esbq_exec(this, &sig, sizeof(sig));
 }
@@ -893,7 +877,7 @@
 		.cap_info	 = this->cap_info,
 	};
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
 	return wl3501_esbq_exec(this, &sig, sizeof(sig));
 }
@@ -903,7 +887,7 @@
 	struct wl3501_card *this = netdev_priv(dev);
 	struct wl3501_join_confirm sig;
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 	if (sig.status == WL3501_STATUS_SUCCESS) {
 		if (this->net_type == IW_MODE_INFRA) {
@@ -962,7 +946,7 @@
 {
 	struct wl3501_md_confirm sig;
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 	wl3501_free_tx_buffer(this, sig.data);
 	if (netif_queue_stopped(dev))
@@ -1017,7 +1001,7 @@
 static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
 						u16 addr, void *sig, int size)
 {
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
 			    sizeof(this->sig_get_confirm));
 	wake_up(&this->wait);
@@ -1029,7 +1013,7 @@
 {
 	struct wl3501_start_confirm sig;
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 	if (sig.status == WL3501_STATUS_SUCCESS)
 		netif_wake_queue(dev);
@@ -1041,7 +1025,7 @@
 	struct wl3501_card *this = netdev_priv(dev);
 	struct wl3501_assoc_confirm sig;
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 
 	if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1053,7 +1037,7 @@
 {
 	struct wl3501_auth_confirm sig;
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 	wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
 
 	if (sig.status == WL3501_STATUS_SUCCESS)
@@ -1069,7 +1053,7 @@
 	u8 sig_id;
 	struct wl3501_card *this = netdev_priv(dev);
 
-	dprintk(3, "entry");
+	pr_debug("entry");
 loop:
 	morepkts = 0;
 	if (!wl3501_esbq_confirm(this))
@@ -1302,7 +1286,7 @@
 	wl3501_ack_interrupt(this);
 	wl3501_unblock_interrupt(this);
 	wl3501_mgmt_scan(this, 100);
-	dprintk(1, "%s: device reset", dev->name);
+	pr_debug("%s: device reset", dev->name);
 	rc = 0;
 out:
 	return rc;
@@ -1376,7 +1360,7 @@
 	link->open++;
 
 	/* Initial WL3501 firmware */
-	dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+	pr_debug("%s: Initialize WL3501 firmware...", dev->name);
 	if (wl3501_init_firmware(this))
 		goto fail;
 	/* Initial device variables */
@@ -1388,7 +1372,7 @@
 	wl3501_unblock_interrupt(this);
 	wl3501_mgmt_scan(this, 100);
 	rc = 0;
-	dprintk(1, "%s: WL3501 opened", dev->name);
+	pr_debug("%s: WL3501 opened", dev->name);
 	printk(KERN_INFO "%s: Card Name: %s\n"
 			 "%s: Firmware Date: %s\n",
 			 dev->name, this->card_name,
@@ -1914,8 +1898,7 @@
 	p_dev->io.IOAddrLines	= 5;
 
 	/* Interrupt setup */
-	p_dev->irq.Attributes	= IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	p_dev->irq.IRQInfo1	= IRQ_LEVEL_ID;
+	p_dev->irq.Attributes	= IRQ_TYPE_DYNAMIC_SHARING;
 	p_dev->irq.Handler = wl3501_interrupt;
 
 	/* General socket configuration */
@@ -1938,16 +1921,13 @@
 	dev->wireless_handlers	= &wl3501_handler_def;
 	SET_ETHTOOL_OPS(dev, &ops);
 	netif_stop_queue(dev);
-	p_dev->priv = p_dev->irq.Instance = dev;
+	p_dev->priv = dev;
 
 	return wl3501_config(p_dev);
 out_link:
 	return -ENOMEM;
 }
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 /**
  * wl3501_config - configure the PCMCIA socket and make eth device available
  * @link - FILL_IN
@@ -1959,7 +1939,7 @@
 static int wl3501_config(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
-	int i = 0, j, last_fn, last_ret;
+	int i = 0, j, ret;
 	struct wl3501_card *this;
 
 	/* Try allocating IO ports.  This tries a few fixed addresses.  If you
@@ -1975,24 +1955,26 @@
 		if (i == 0)
 			break;
 	}
-	if (i != 0) {
-		cs_error(link, RequestIO, i);
+	if (i != 0)
 		goto failed;
-	}
 
 	/* Now allocate an interrupt line. Note that this does not actually
 	 * assign a handler to the interrupt. */
 
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
 
 	/* This actually configures the PCMCIA socket -- setting up the I/O
 	 * windows and the interrupt mapping.  */
 
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	dev->irq = link->irq.AssignedIRQ;
 	dev->base_addr = link->io.BasePort1;
-	SET_NETDEV_DEV(dev, &handle_to_dev(link));
+	SET_NETDEV_DEV(dev, &link->dev);
 	if (register_netdev(dev)) {
 		printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
 		goto failed;
@@ -2041,8 +2023,6 @@
 	netif_start_queue(dev);
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	wl3501_release(link);
 	return -ENODEV;
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index bc81974..33c8be7 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -112,6 +112,9 @@
 	return err;
 }
 
+MODULE_FIRMWARE("zd1201-ap.fw");
+MODULE_FIRMWARE("zd1201.fw");
+
 static void zd1201_usbfree(struct urb *urb)
 {
 	struct zd1201 *zd = urb->context;
diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig
index 74b31ea..5f80969 100644
--- a/drivers/net/wireless/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zd1211rw/Kconfig
@@ -1,6 +1,6 @@
 config ZD1211RW
 	tristate "ZyDAS ZD1211/ZD1211B USB-wireless support"
-	depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL
+	depends on USB && MAC80211 && EXPERIMENTAL
 	select FW_LOADER
 	---help---
 	  This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 4e79a98..dfa1b9bc 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -755,7 +755,7 @@
 static int zd1211_hw_init_hmac(struct zd_chip *chip)
 {
 	static const struct zd_ioreq32 ioreqs[] = {
-		{ CR_ZD1211_RETRY_MAX,		0x2 },
+		{ CR_ZD1211_RETRY_MAX,		ZD1211_RETRY_COUNT },
 		{ CR_RX_THRESHOLD,		0x000c0640 },
 	};
 
@@ -767,7 +767,7 @@
 static int zd1211b_hw_init_hmac(struct zd_chip *chip)
 {
 	static const struct zd_ioreq32 ioreqs[] = {
-		{ CR_ZD1211B_RETRY_MAX,		0x02020202 },
+		{ CR_ZD1211B_RETRY_MAX,		ZD1211B_RETRY_COUNT },
 		{ CR_ZD1211B_CWIN_MAX_MIN_AC0,	0x007f003f },
 		{ CR_ZD1211B_CWIN_MAX_MIN_AC1,	0x007f003f },
 		{ CR_ZD1211B_CWIN_MAX_MIN_AC2,  0x003f001f },
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 678c139..9fd8f35 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -642,13 +642,29 @@
 #define CR_ZD1211B_TXOP			CTL_REG(0x0b20)
 #define CR_ZD1211B_RETRY_MAX		CTL_REG(0x0b28)
 
+/* Value for CR_ZD1211_RETRY_MAX & CR_ZD1211B_RETRY_MAX. Vendor driver uses 2,
+ * we use 0. The first rate is tried (count+2), then all next rates are tried
+ * twice, until 1 Mbits is tried. */
+#define	ZD1211_RETRY_COUNT		0
+#define	ZD1211B_RETRY_COUNT	\
+	(ZD1211_RETRY_COUNT <<  0)|	\
+	(ZD1211_RETRY_COUNT <<  8)|	\
+	(ZD1211_RETRY_COUNT << 16)|	\
+	(ZD1211_RETRY_COUNT << 24)
+
 /* Used to detect PLL lock */
 #define UW2453_INTR_REG			((zd_addr_t)0x85c1)
 
 #define CWIN_SIZE			0x007f043f
 
 
-#define HWINT_ENABLED			0x004f0000
+#define HWINT_ENABLED			\
+	(INT_TX_COMPLETE_EN|		\
+	 INT_RX_COMPLETE_EN|		\
+	 INT_RETRY_FAIL_EN|		\
+	 INT_WAKEUP_EN|			\
+	 INT_CFG_NEXT_BCN_EN)
+
 #define HWINT_DISABLED			0
 
 #define E2P_PWR_INT_GUARD		8
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6d66635..8a243732 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -88,6 +88,34 @@
 	  .flags = 0 },
 };
 
+/*
+ * Zydas retry rates table. Each line is listed in the same order as
+ * in zd_rates[] and contains all the rate used when a packet is sent
+ * starting with a given rates. Let's consider an example :
+ *
+ * "11 Mbits : 4, 3, 2, 1, 0" means :
+ * - packet is sent using 4 different rates
+ * - 1st rate is index 3 (ie 11 Mbits)
+ * - 2nd rate is index 2 (ie 5.5 Mbits)
+ * - 3rd rate is index 1 (ie 2 Mbits)
+ * - 4th rate is index 0 (ie 1 Mbits)
+ */
+
+static const struct tx_retry_rate zd_retry_rates[] = {
+	{ /*  1 Mbits */	1, { 0 }},
+	{ /*  2 Mbits */	2, { 1,  0 }},
+	{ /*  5.5 Mbits */	3, { 2,  1, 0 }},
+	{ /* 11 Mbits */	4, { 3,  2, 1, 0 }},
+	{ /*  6 Mbits */	5, { 4,  3, 2, 1, 0 }},
+	{ /*  9 Mbits */	6, { 5,  4, 3, 2, 1, 0}},
+	{ /* 12 Mbits */	5, { 6,  3, 2, 1, 0 }},
+	{ /* 18 Mbits */	6, { 7,  6, 3, 2, 1, 0 }},
+	{ /* 24 Mbits */	6, { 8,  6, 3, 2, 1, 0 }},
+	{ /* 36 Mbits */	7, { 9,  8, 6, 3, 2, 1, 0 }},
+	{ /* 48 Mbits */	8, {10,  9, 8, 6, 3, 2, 1, 0 }},
+	{ /* 54 Mbits */	9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }}
+};
+
 static const struct ieee80211_channel zd_channels[] = {
 	{ .center_freq = 2412, .hw_value = 1 },
 	{ .center_freq = 2417, .hw_value = 2 },
@@ -282,7 +310,7 @@
 }
 
 /**
- * tx_status - reports tx status of a packet if required
+ * zd_mac_tx_status - reports tx status of a packet if required
  * @hw - a &struct ieee80211_hw pointer
  * @skb - a sk-buffer
  * @flags: extra flags to set in the TX status info
@@ -295,15 +323,49 @@
  *
  * If no status information has been requested, the skb is freed.
  */
-static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
-		      int ackssi, bool success)
+static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
+		      int ackssi, struct tx_status *tx_status)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	int i;
+	int success = 1, retry = 1;
+	int first_idx;
+	const struct tx_retry_rate *retries;
 
 	ieee80211_tx_info_clear_status(info);
 
-	if (success)
+	if (tx_status) {
+		success = !tx_status->failure;
+		retry = tx_status->retry + success;
+	}
+
+	if (success) {
+		/* success */
 		info->flags |= IEEE80211_TX_STAT_ACK;
+	} else {
+		/* failure */
+		info->flags &= ~IEEE80211_TX_STAT_ACK;
+	}
+
+	first_idx = info->status.rates[0].idx;
+	ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+	retries = &zd_retry_rates[first_idx];
+	ZD_ASSERT(0<=retry && retry<=retries->count);
+
+	info->status.rates[0].idx = retries->rate[0];
+	info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
+
+	for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) {
+		info->status.rates[i].idx = retries->rate[i];
+		info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
+	}
+	for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
+		info->status.rates[i].idx = retries->rate[retry-1];
+		info->status.rates[i].count = 1; // (success ? 1:2);
+	}
+	if (i<IEEE80211_TX_MAX_RATES)
+		info->status.rates[i].idx = -1; /* terminate */
+
 	info->status.ack_signal = ackssi;
 	ieee80211_tx_status_irqsafe(hw, skb);
 }
@@ -316,16 +378,79 @@
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */
-void zd_mac_tx_failed(struct ieee80211_hw *hw)
+void zd_mac_tx_failed(struct urb *urb)
 {
-	struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue;
+	struct ieee80211_hw * hw = zd_usb_to_hw(urb->context);
+	struct zd_mac *mac = zd_hw_mac(hw);
+	struct sk_buff_head *q = &mac->ack_wait_queue;
 	struct sk_buff *skb;
+	struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer;
+	unsigned long flags;
+	int success = !tx_status->failure;
+	int retry = tx_status->retry + success;
+	int found = 0;
+	int i, position = 0;
 
-	skb = skb_dequeue(q);
-	if (skb == NULL)
-		return;
+	q = &mac->ack_wait_queue;
+	spin_lock_irqsave(&q->lock, flags);
 
-	tx_status(hw, skb, 0, 0);
+	skb_queue_walk(q, skb) {
+		struct ieee80211_hdr *tx_hdr;
+		struct ieee80211_tx_info *info;
+		int first_idx, final_idx;
+		const struct tx_retry_rate *retries;
+		u8 final_rate;
+
+		position ++;
+
+		/* if the hardware reports a failure and we had a 802.11 ACK
+		 * pending, then we skip the first skb when searching for a
+		 * matching frame */
+		if (tx_status->failure && mac->ack_pending &&
+		    skb_queue_is_first(q, skb)) {
+			continue;
+		}
+
+		tx_hdr = (struct ieee80211_hdr *)skb->data;
+
+		/* we skip all frames not matching the reported destination */
+		if (unlikely(memcmp(tx_hdr->addr1, tx_status->mac, ETH_ALEN))) {
+			continue;
+		}
+
+		/* we skip all frames not matching the reported final rate */
+
+		info = IEEE80211_SKB_CB(skb);
+		first_idx = info->status.rates[0].idx;
+		ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+		retries = &zd_retry_rates[first_idx];
+		if (retry < 0 || retry > retries->count) {
+			continue;
+		}
+
+		ZD_ASSERT(0<=retry && retry<=retries->count);
+		final_idx = retries->rate[retry-1];
+		final_rate = zd_rates[final_idx].hw_value;
+
+		if (final_rate != tx_status->rate) {
+			continue;
+		}
+
+		found = 1;
+		break;
+	}
+
+	if (found) {
+		for (i=1; i<=position; i++) {
+			skb = __skb_dequeue(q);
+			zd_mac_tx_status(hw, skb,
+					 mac->ack_pending ? mac->ack_signal : 0,
+					 i == position ? tx_status : NULL);
+			mac->ack_pending = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&q->lock, flags);
 }
 
 /**
@@ -342,18 +467,27 @@
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hw *hw = info->rate_driver_data[0];
+	struct zd_mac *mac = zd_hw_mac(hw);
+
+	ieee80211_tx_info_clear_status(info);
 
 	skb_pull(skb, sizeof(struct zd_ctrlset));
 	if (unlikely(error ||
 	    (info->flags & IEEE80211_TX_CTL_NO_ACK))) {
-		tx_status(hw, skb, 0, !error);
+		/*
+		 * FIXME : do we need to fill in anything ?
+		 */
+		ieee80211_tx_status_irqsafe(hw, skb);
 	} else {
-		struct sk_buff_head *q =
-			&zd_hw_mac(hw)->ack_wait_queue;
+		struct sk_buff_head *q = &mac->ack_wait_queue;
 
 		skb_queue_tail(q, skb);
-		while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS)
-			zd_mac_tx_failed(hw);
+		while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) {
+			zd_mac_tx_status(hw, skb_dequeue(q),
+					 mac->ack_pending ? mac->ack_signal : 0,
+					 NULL);
+			mac->ack_pending = 0;
+		}
 	}
 }
 
@@ -606,27 +740,47 @@
 static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
 		      struct ieee80211_rx_status *stats)
 {
+	struct zd_mac *mac = zd_hw_mac(hw);
 	struct sk_buff *skb;
 	struct sk_buff_head *q;
 	unsigned long flags;
+	int found = 0;
+	int i, position = 0;
 
 	if (!ieee80211_is_ack(rx_hdr->frame_control))
 		return 0;
 
-	q = &zd_hw_mac(hw)->ack_wait_queue;
+	q = &mac->ack_wait_queue;
 	spin_lock_irqsave(&q->lock, flags);
 	skb_queue_walk(q, skb) {
 		struct ieee80211_hdr *tx_hdr;
 
+		position ++;
+
+		if (mac->ack_pending && skb_queue_is_first(q, skb))
+		    continue;
+
 		tx_hdr = (struct ieee80211_hdr *)skb->data;
 		if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN)))
 		{
-			__skb_unlink(skb, q);
-			tx_status(hw, skb, stats->signal, 1);
-			goto out;
+			found = 1;
+			break;
 		}
 	}
-out:
+
+	if (found) {
+		for (i=1; i<position; i++) {
+			skb = __skb_dequeue(q);
+			zd_mac_tx_status(hw, skb,
+					 mac->ack_pending ? mac->ack_signal : 0,
+					 NULL);
+			mac->ack_pending = 0;
+		}
+
+		mac->ack_pending = 1;
+		mac->ack_signal = stats->signal;
+	}
+
 	spin_unlock_irqrestore(&q->lock, flags);
 	return 1;
 }
@@ -709,6 +863,7 @@
 		skb_reserve(skb, 2);
 	}
 
+	/* FIXME : could we avoid this big memcpy ? */
 	memcpy(skb_put(skb, length), buffer, length);
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
@@ -999,7 +1154,14 @@
 	hw->queues = 1;
 	hw->extra_tx_headroom = sizeof(struct zd_ctrlset);
 
+	/*
+	 * Tell mac80211 that we support multi rate retries
+	 */
+	hw->max_rates = IEEE80211_TX_MAX_RATES;
+	hw->max_rate_tries = 18;	/* 9 rates * 2 retries/rate */
+
 	skb_queue_head_init(&mac->ack_wait_queue);
+	mac->ack_pending = 0;
 
 	zd_chip_init(&mac->chip, hw, intf);
 	housekeeping_init(mac);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 7c27591..630c298 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -140,6 +140,21 @@
 #define ZD_RX_CRC16_ERROR		0x40
 #define ZD_RX_ERROR			0x80
 
+struct tx_retry_rate {
+	int count;	/* number of valid element in rate[] array */
+	int rate[10];	/* retry rates, described by an index in zd_rates[] */
+};
+
+struct tx_status {
+	u8 type;	/* must always be 0x01 : USB_INT_TYPE */
+	u8 id;		/* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */
+	u8 rate;
+	u8 pad;
+	u8 mac[ETH_ALEN];
+	u8 retry;
+	u8 failure;
+} __attribute__((packed));
+
 enum mac_flags {
 	MAC_FIXED_CHANNEL = 0x01,
 };
@@ -150,7 +165,7 @@
 
 #define ZD_MAC_STATS_BUFFER_SIZE 16
 
-#define ZD_MAC_MAX_ACK_WAITERS 10
+#define ZD_MAC_MAX_ACK_WAITERS 50
 
 struct zd_mac {
 	struct zd_chip chip;
@@ -184,6 +199,12 @@
 
 	/* whether to pass control frames to stack */
 	unsigned int pass_ctrl:1;
+
+	/* whether we have received a 802.11 ACK that is pending */
+	unsigned int ack_pending:1;
+
+	/* signal strength of the last 802.11 ACK received */
+	int ack_signal;
 };
 
 #define ZD_REGDOMAIN_FCC	0x10
@@ -279,7 +300,7 @@
 int zd_mac_init_hw(struct ieee80211_hw *hw);
 
 int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
-void zd_mac_tx_failed(struct ieee80211_hw *hw);
+void zd_mac_tx_failed(struct urb *urb);
 void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
 
 #ifdef DEBUG
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 23a6a6d..ac19ecd 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -318,6 +318,13 @@
 	return r;
 }
 
+MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ur");
+MODULE_FIRMWARE(FW_ZD1211_PREFIX "ur");
+MODULE_FIRMWARE(FW_ZD1211B_PREFIX "ub");
+MODULE_FIRMWARE(FW_ZD1211_PREFIX "ub");
+MODULE_FIRMWARE(FW_ZD1211B_PREFIX "uphr");
+MODULE_FIRMWARE(FW_ZD1211_PREFIX "uphr");
+
 /* Read data from device address space using "firmware interface" which does
  * not require firmware to be loaded. */
 int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len)
@@ -419,7 +426,7 @@
 		handle_regs_int(urb);
 		break;
 	case USB_INT_ID_RETRY_FAILED:
-		zd_mac_tx_failed(zd_usb_to_hw(urb->context));
+		zd_mac_tx_failed(urb);
 		break;
 	default:
 		dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb,
@@ -553,6 +560,8 @@
 
 	if (length < sizeof(struct rx_length_info)) {
 		/* It's not a complete packet anyhow. */
+		printk("%s: invalid, small RX packet : %d\n",
+		       __func__, length);
 		return;
 	}
 	length_info = (struct rx_length_info *)
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 83a044d..8c777ba 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -660,7 +660,7 @@
 	xemaclite_set_mac_address(lp, dev->dev_addr);
 
 	/* Grab the IRQ */
-	retval = request_irq(dev->irq, &xemaclite_interrupt, 0, dev->name, dev);
+	retval = request_irq(dev->irq, xemaclite_interrupt, 0, dev->name, dev);
 	if (retval) {
 		dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n",
 			dev->irq);
diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c
index 0c44135..389ba9d 100644
--- a/drivers/net/xtsonic.c
+++ b/drivers/net/xtsonic.c
@@ -92,7 +92,7 @@
 
 static int xtsonic_open(struct net_device *dev)
 {
-	if (request_irq(dev->irq,&sonic_interrupt,IRQF_DISABLED,"sonic",dev)) {
+	if (request_irq(dev->irq,sonic_interrupt,IRQF_DISABLED,"sonic",dev)) {
 		printk(KERN_ERR "%s: unable to get IRQ %d.\n",
 		       dev->name, dev->irq);
 		return -EAGAIN;
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index 40ad0de..0f773a9 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -579,7 +579,7 @@
 	/* Reset the chip. */
 	iowrite32(0x80000000, ioaddr + DMACtrl);
 
-	ret = request_irq(dev->irq, &yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
+	ret = request_irq(dev->irq, yellowfin_interrupt, IRQF_SHARED, dev->name, dev);
 	if (ret)
 		return ret;
 
@@ -944,8 +944,8 @@
 			dev_kfree_skb_irq(skb);
 			yp->tx_skbuff[entry] = NULL;
 		}
-		if (yp->tx_full
-			&& yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
+		if (yp->tx_full &&
+		    yp->cur_tx - yp->dirty_tx < TX_QUEUE_SIZE - 4) {
 			/* The ring is no longer full, clear tbusy. */
 			yp->tx_full = 0;
 			netif_wake_queue(dev);
@@ -1014,8 +1014,8 @@
 			}
 #endif
 
-			if (yp->tx_full
-				&& yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
+			if (yp->tx_full &&
+			    yp->cur_tx - dirty_tx < TX_QUEUE_SIZE - 2) {
 				/* The ring is no longer full, clear tbusy. */
 				yp->tx_full = 0;
 				netif_wake_queue(dev);
diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index b423473..bc5ae0f 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -103,8 +103,7 @@
 #include <asm/io.h>
 #include <asm/dma.h>
 
-/* This include could be elsewhere, since it is not wireless specific */
-#include "wireless/i82593.h"
+#include <linux/i82593.h>
 
 static char version[] __initdata = "znet.c:v1.02 9/23/94 becker@scyld.com\n";
 
@@ -170,7 +169,7 @@
 {
 	struct znet_private *znet = netdev_priv(dev);
 
-	if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev))
+	if (request_irq (dev->irq, znet_interrupt, 0, "ZNet", dev))
 		goto failed;
 	if (request_dma (znet->rx_dma, "ZNet rx"))
 		goto free_irq;
@@ -698,8 +697,8 @@
 	   the same area of the backwards links we now have.  This allows us to
 	   pass packets to the upper layers in the order they were received --
 	   important for fast-path sequential operations. */
-	 while (znet->rx_start + cur_frame_end_offset != znet->rx_cur
-			&& ++boguscount < 5) {
+	while (znet->rx_start + cur_frame_end_offset != znet->rx_cur &&
+	       ++boguscount < 5) {
 		unsigned short hi_cnt, lo_cnt, hi_status, lo_status;
 		int count, status;
 
diff --git a/drivers/of/base.c b/drivers/of/base.c
index ddf224d..e6627b2 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -9,7 +9,8 @@
  *
  *  Adapted for sparc and sparc64 by David S. Miller davem@davemloft.net
  *
- *  Reconsolidated from arch/x/kernel/prom.c by Stephen Rothwell.
+ *  Reconsolidated from arch/x/kernel/prom.c by Stephen Rothwell and
+ *  Grant Likely.
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -82,6 +83,29 @@
 }
 EXPORT_SYMBOL(of_find_property);
 
+/**
+ * of_find_all_nodes - Get next node in global list
+ * @prev:	Previous node or NULL to start iteration
+ *		of_node_put() will be called on it
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_all_nodes(struct device_node *prev)
+{
+	struct device_node *np;
+
+	read_lock(&devtree_lock);
+	np = prev ? prev->allnext : allnodes;
+	for (; np != NULL; np = np->allnext)
+		if (of_node_get(np))
+			break;
+	of_node_put(prev);
+	read_unlock(&devtree_lock);
+	return np;
+}
+EXPORT_SYMBOL(of_find_all_nodes);
+
 /*
  * Find a property with a given name for a given node
  * and return the value.
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 9581d36..79caf1c 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -352,11 +352,9 @@
 
 	rx_total = tx_total = 0;
 	
-	/* we are running as a workqueue task, so locking dev_base 
-	 * for reading should be OK */
-	read_lock(&dev_base_lock);
+	/* we are running as a workqueue task, so we can use an RCU lookup */
 	rcu_read_lock();
-	for_each_netdev(&init_net, dev) {
+	for_each_netdev_rcu(&init_net, dev) {
 	    const struct net_device_stats *stats;
 	    struct in_device *in_dev = __in_dev_get_rcu(dev);
 	    if (!in_dev || !in_dev->ifa_list)
@@ -368,7 +366,6 @@
 	    tx_total += stats->tx_packets;
 	}
 	rcu_read_unlock();
-	read_unlock(&dev_base_lock);
 
 	retval = 0;
 
diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c
index 8fdfa4f..7dd370f 100644
--- a/drivers/parport/parport_cs.c
+++ b/drivers/parport/parport_cs.c
@@ -67,14 +67,6 @@
 
 INT_MODULE_PARM(epp_mode, 1);
 
-#ifdef PCMCIA_DEBUG
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"parport_cs.c 1.29 2002/10/11 06:57:41 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -103,7 +95,7 @@
 {
     parport_info_t *info;
 
-    DEBUG(0, "parport_attach()\n");
+    dev_dbg(&link->dev, "parport_attach()\n");
 
     /* Create new parport device */
     info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -114,7 +106,6 @@
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
     link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -132,7 +123,7 @@
 
 static void parport_detach(struct pcmcia_device *link)
 {
-    DEBUG(0, "parport_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "parport_detach\n");
 
     parport_cs_release(link);
 
@@ -147,9 +138,6 @@
 
 ======================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int parport_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
@@ -178,18 +166,20 @@
 {
     parport_info_t *info = link->priv;
     struct parport *p;
-    int last_ret, last_fn;
+    int ret;
 
-    DEBUG(0, "parport_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "parport_config\n");
 
-    last_ret = pcmcia_loop_config(link, parport_config_check, NULL);
-    if (last_ret) {
-	    cs_error(link, RequestIO, last_ret);
+    ret = pcmcia_loop_config(link, parport_config_check, NULL);
+    if (ret)
 	    goto failed;
-    }
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     p = parport_pc_probe_port(link->io.BasePort1, link->io.BasePort2,
 			      link->irq.AssignedIRQ, PARPORT_DMA_NONE,
@@ -213,8 +203,6 @@
 
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     parport_cs_release(link);
     return -ENODEV;
@@ -232,7 +220,7 @@
 {
 	parport_info_t *info = link->priv;
 
-	DEBUG(0, "parport_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "parport_release\n");
 
 	if (info->ndev) {
 		struct parport *p = info->port;
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 6dec9ba..362db31 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -386,7 +386,7 @@
 		if (!this_port[i])
 			continue;
 		parport_remove_port(this_port[i]);
-		if (!this_port[i]->irq != PARPORT_IRQ_NONE) {
+		if (this_port[i]->irq != PARPORT_IRQ_NONE) {
 			if (--use_cnt == 0) 
 				free_irq(IRQ_AMIGA_PORTS, &pp_mfc3_ops);
 		}
diff --git a/drivers/parport/procfs.c b/drivers/parport/procfs.c
index 8eefe56..3f56bc0 100644
--- a/drivers/parport/procfs.c
+++ b/drivers/parport/procfs.c
@@ -233,10 +233,10 @@
 	return copy_to_user(result, buffer, len) ? -EFAULT : 0;
 }
 
-#define PARPORT_PORT_DIR(CHILD) { .ctl_name = 0, .procname = NULL, .mode = 0555, .child = CHILD }
-#define PARPORT_PARPORT_DIR(CHILD) { .ctl_name = DEV_PARPORT, .procname = "parport", \
+#define PARPORT_PORT_DIR(CHILD) { .procname = NULL, .mode = 0555, .child = CHILD }
+#define PARPORT_PARPORT_DIR(CHILD) { .procname = "parport", \
                                      .mode = 0555, .child = CHILD }
-#define PARPORT_DEV_DIR(CHILD) { .ctl_name = CTL_DEV, .procname = "dev", .mode = 0555, .child = CHILD }
+#define PARPORT_DEV_DIR(CHILD) { .procname = "dev", .mode = 0555, .child = CHILD }
 #define PARPORT_DEVICES_ROOT_DIR  {  .procname = "devices", \
                                     .mode = 0555, .child = NULL }
 
@@ -270,7 +270,7 @@
 			.data		= NULL,
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
-			.proc_handler	= &proc_dointvec_minmax,
+			.proc_handler	= proc_dointvec_minmax,
 			.extra1		= (void*) &parport_min_spintime_value,
 			.extra2		= (void*) &parport_max_spintime_value
 		},
@@ -279,28 +279,28 @@
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_hardware_base_addr
+			.proc_handler	= do_hardware_base_addr
 		},
 		{
 			.procname	= "irq",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_hardware_irq
+			.proc_handler	= do_hardware_irq
 		},
 		{
 			.procname	= "dma",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_hardware_dma
+			.proc_handler	= do_hardware_dma
 		},
 		{
 			.procname	= "modes",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_hardware_modes
+			.proc_handler	= do_hardware_modes
 		},
 		PARPORT_DEVICES_ROOT_DIR,
 #ifdef CONFIG_PARPORT_1284
@@ -309,35 +309,35 @@
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_autoprobe
+			.proc_handler	= do_autoprobe
 		},
 		{
 			.procname	= "autoprobe0",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	=  &do_autoprobe
+			.proc_handler	= do_autoprobe
 		},
 		{
 			.procname	= "autoprobe1",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_autoprobe
+			.proc_handler	= do_autoprobe
 		},
 		{
 			.procname	= "autoprobe2",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_autoprobe
+			.proc_handler	= do_autoprobe
 		},
 		{
 			.procname	= "autoprobe3",
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_autoprobe
+			.proc_handler	= do_autoprobe
 		},
 #endif /* IEEE 1284 support */
 		{}
@@ -348,7 +348,7 @@
 			.data		= NULL,
 			.maxlen		= 0,
 			.mode		= 0444,
-			.proc_handler	= &do_active_device
+			.proc_handler	= do_active_device
 		},
 		{}
 	},
@@ -386,14 +386,13 @@
 			.data		= NULL,
 			.maxlen		= sizeof(unsigned long),
 			.mode		= 0644,
-			.proc_handler	= &proc_doulongvec_ms_jiffies_minmax,
+			.proc_handler	= proc_doulongvec_ms_jiffies_minmax,
 			.extra1		= (void*) &parport_min_timeslice_value,
 			.extra2		= (void*) &parport_max_timeslice_value
 		},
 	},
 	{
 		{
-			.ctl_name	= 0,
 			.procname	= NULL,
 			.data		= NULL,
 			.maxlen		= 0,
@@ -438,7 +437,7 @@
 			.data		= &parport_default_timeslice,
 			.maxlen		= sizeof(parport_default_timeslice),
 			.mode		= 0644,
-			.proc_handler	= &proc_doulongvec_ms_jiffies_minmax,
+			.proc_handler	= proc_doulongvec_ms_jiffies_minmax,
 			.extra1		= (void*) &parport_min_timeslice_value,
 			.extra2		= (void*) &parport_max_timeslice_value
 		},
@@ -447,7 +446,7 @@
 			.data		= &parport_default_spintime,
 			.maxlen		= sizeof(parport_default_spintime),
 			.mode		= 0644,
-			.proc_handler	= &proc_dointvec_minmax,
+			.proc_handler	= proc_dointvec_minmax,
 			.extra1		= (void*) &parport_min_spintime_value,
 			.extra2		= (void*) &parport_max_spintime_value
 		},
@@ -455,7 +454,6 @@
 	},
 	{
 		{
-			.ctl_name	= DEV_PARPORT_DEFAULT,
 			.procname	= "default",
 			.mode		= 0555,
 			.child		= parport_default_sysctl_table.vars
@@ -495,7 +493,6 @@
 		t->vars[6 + i].extra2 = &port->probe_info[i];
 
 	t->port_dir[0].procname = port->name;
-	t->port_dir[0].ctl_name = 0;
 
 	t->port_dir[0].child = t->vars;
 	t->parport_dir[0].child = t->port_dir;
@@ -534,11 +531,9 @@
 	t->dev_dir[0].child = t->parport_dir;
 	t->parport_dir[0].child = t->port_dir;
 	t->port_dir[0].procname = port->name;
-	t->port_dir[0].ctl_name = 0;
 	t->port_dir[0].child = t->devices_root_dir;
 	t->devices_root_dir[0].child = t->device_dir;
 
-	t->device_dir[0].ctl_name = 0;
 	t->device_dir[0].procname = device->name;
 	t->device_dir[0].child = t->vars;
 	t->vars[0].data = &device->timeslice;
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index b952ebc..416f6ac 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -645,10 +645,13 @@
 			       "x2apic and Intr-remapping.\n");
 #endif
 #ifdef CONFIG_DMAR
-		if (ret && !no_iommu && !iommu_detected && !swiotlb &&
-		    !dmar_disabled)
+		if (ret && !no_iommu && !iommu_detected && !dmar_disabled)
 			iommu_detected = 1;
 #endif
+#ifdef CONFIG_X86
+		if (ret)
+			x86_init.iommu.iommu_init = intel_iommu_init;
+#endif
 	}
 	early_acpi_os_unmap_memory(dmar_tbl, dmar_tbl_size);
 	dmar_tbl = NULL;
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 1840a05..9261327 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3266,7 +3266,7 @@
 	 * Check the need for DMA-remapping initialization now.
 	 * Above initialization will also be used by Interrupt-remapping.
 	 */
-	if (no_iommu || swiotlb || dmar_disabled)
+	if (no_iommu || dmar_disabled)
 		return -ENODEV;
 
 	iommu_init_mempool();
@@ -3287,7 +3287,9 @@
 	"PCI-DMA: Intel(R) Virtualization Technology for Directed I/O\n");
 
 	init_timer(&unmap_timer);
-	force_iommu = 1;
+#ifdef CONFIG_SWIOTLB
+	swiotlb = 0;
+#endif
 	dma_ops = &intel_dma_ops;
 
 	init_iommu_sysfs();
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 17f38a7..cd5082d 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -17,24 +17,6 @@
 
 if PCCARD
 
-config PCMCIA_DEBUG
-	bool "Enable PCCARD debugging"
-	help
-	  Say Y here to enable PCMCIA subsystem debugging.  You
-	  will need to choose the debugging level either via the
-	  kernel command line, or module options depending whether
-	  you build the PCMCIA as modules.
-
-	  The kernel command line options are:
-	    pcmcia_core.pc_debug=N
-	    pcmcia.pc_debug=N
-	    sa11xx_core.pc_debug=N
-
-	  The module option is called pc_debug=N
-
-	  In all the above examples, N is the debugging verbosity
-	  level.
-
 config PCMCIA
 	tristate "16-bit PCMCIA support"
 	select CRC32
@@ -196,9 +178,13 @@
 	tristate "bcm63xx pcmcia support"
 	depends on BCM63XX && PCMCIA
 
+config PCMCIA_SOC_COMMON
+	tristate
+
 config PCMCIA_SA1100
 	tristate "SA1100 support"
 	depends on ARM && ARCH_SA1100 && PCMCIA
+	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for SA11x0-based PCMCIA or CF
 	  sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
@@ -209,6 +195,7 @@
 config PCMCIA_SA1111
 	tristate "SA1111 support"
 	depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
+	select PCMCIA_SOC_COMMON
 	help
 	  Say Y  here to include support for SA1111-based PCMCIA or CF
 	  sockets, found on the Jornada 720, Graphicsmaster and other
@@ -222,9 +209,28 @@
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2)
+	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
 
+config PCMCIA_DEBUG
+	bool "Enable debugging"
+	depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
+	help
+	  Say Y here to enable debugging for the SoC PCMCIA layer.
+	  You will need to choose the debugging level either via the
+	  kernel command line, or module options depending whether
+	  you build the drivers as modules.
+
+	  The kernel command line options are:
+	    sa11xx_core.pc_debug=N
+	    pxa2xx_core.pc_debug=N
+
+	  The module option is called pc_debug=N
+
+	  In all the above examples, N is the debugging verbosity
+	  level.
+
 config PCMCIA_PROBE
 	bool
 	default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index a03a38a..3829383 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -22,8 +22,9 @@
 obj-$(CONFIG_I82092)				+= i82092.o
 obj-$(CONFIG_TCIC)				+= tcic.o
 obj-$(CONFIG_PCMCIA_M8XX)			+= m8xx_pcmcia.o
-obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_core.o sa1100_cs.o
-obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_core.o sa1111_cs.o
+obj-$(CONFIG_PCMCIA_SOC_COMMON)			+= soc_common.o
+obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_base.o sa1100_cs.o
+obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_base.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
 obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
@@ -35,9 +36,6 @@
 obj-$(CONFIG_AT91_CF)				+= at91_cf.o
 obj-$(CONFIG_ELECTRA_CF)			+= electra_cf.o
 
-sa11xx_core-y					+= soc_common.o sa11xx_base.o
-pxa2xx_core-y					+= soc_common.o pxa2xx_base.o
-
 au1x00_ss-y					+= au1000_generic.o
 au1x00_ss-$(CONFIG_MIPS_PB1000)			+= au1000_pb1x00.o
 au1x00_ss-$(CONFIG_MIPS_PB1100)			+= au1000_pb1x00.o
@@ -77,4 +75,4 @@
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 
-obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_core.o $(pxa2xx-obj-y)
+obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
index db77e1f..4cd70d0 100644
--- a/drivers/pcmcia/cardbus.c
+++ b/drivers/pcmcia/cardbus.c
@@ -91,7 +91,7 @@
 static void cb_release_cis_mem(struct pcmcia_socket * s)
 {
 	if (s->cb_cis_virt) {
-		cs_dbg(s, 1, "cb_release_cis_mem()\n");
+		dev_dbg(&s->dev, "cb_release_cis_mem()\n");
 		iounmap(s->cb_cis_virt);
 		s->cb_cis_virt = NULL;
 		s->cb_cis_res = NULL;
@@ -132,7 +132,7 @@
 	struct pci_dev *dev;
 	struct resource *res;
 
-	cs_dbg(s, 3, "read_cb_mem(%d, %#x, %u)\n", space, addr, len);
+	dev_dbg(&s->dev, "read_cb_mem(%d, %#x, %u)\n", space, addr, len);
 
 	dev = pci_get_slot(s->cb_dev->subordinate, 0);
 	if (!dev)
diff --git a/drivers/pcmcia/cirrus.h b/drivers/pcmcia/cirrus.h
index ecd4fc7..446a457 100644
--- a/drivers/pcmcia/cirrus.h
+++ b/drivers/pcmcia/cirrus.h
@@ -30,16 +30,6 @@
 #ifndef _LINUX_CIRRUS_H
 #define _LINUX_CIRRUS_H
 
-#ifndef PCI_VENDOR_ID_CIRRUS
-#define PCI_VENDOR_ID_CIRRUS		0x1013
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6729
-#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6832
-#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
-#endif
-
 #define PD67_MISC_CTL_1		0x16	/* Misc control 1 */
 #define PD67_FIFO_CTL		0x17	/* FIFO control */
 #define PD67_MISC_CTL_2		0x1E	/* Misc control 2 */
diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c
index 6c4a4fc..8c1b73c 100644
--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@@ -138,7 +138,7 @@
     void __iomem *sys, *end;
     unsigned char *buf = ptr;
     
-    cs_dbg(s, 3, "pcmcia_read_cis_mem(%d, %#x, %u)\n", attr, addr, len);
+    dev_dbg(&s->dev, "pcmcia_read_cis_mem(%d, %#x, %u)\n", attr, addr, len);
 
     if (attr & IS_INDIRECT) {
 	/* Indirect accesses use a bunch of special registers at fixed
@@ -190,7 +190,7 @@
 	    addr = 0;
 	}
     }
-    cs_dbg(s, 3, "  %#2.2x %#2.2x %#2.2x %#2.2x ...\n",
+    dev_dbg(&s->dev, "  %#2.2x %#2.2x %#2.2x %#2.2x ...\n",
 	  *(u_char *)(ptr+0), *(u_char *)(ptr+1),
 	  *(u_char *)(ptr+2), *(u_char *)(ptr+3));
     return 0;
@@ -204,7 +204,7 @@
     void __iomem *sys, *end;
     unsigned char *buf = ptr;
     
-    cs_dbg(s, 3, "pcmcia_write_cis_mem(%d, %#x, %u)\n", attr, addr, len);
+    dev_dbg(&s->dev, "pcmcia_write_cis_mem(%d, %#x, %u)\n", attr, addr, len);
 
     if (attr & IS_INDIRECT) {
 	/* Indirect accesses use a bunch of special registers at fixed
@@ -584,7 +584,7 @@
 	ofs += link[1] + 2;
     }
     if (i == MAX_TUPLES) {
-	cs_dbg(s, 1, "cs: overrun in pcmcia_get_next_tuple\n");
+	dev_dbg(&s->dev, "cs: overrun in pcmcia_get_next_tuple\n");
 	return -ENOSPC;
     }
     
@@ -1440,7 +1440,7 @@
 	break;
     }
     if (ret)
-	    __cs_dbg(0, "parse_tuple failed %d\n", ret);
+	    pr_debug("parse_tuple failed %d\n", ret);
     return ret;
 }
 EXPORT_SYMBOL(pcmcia_parse_tuple);
@@ -1482,6 +1482,67 @@
 }
 EXPORT_SYMBOL(pccard_read_tuple);
 
+
+/**
+ * pccard_loop_tuple() - loop over tuples in the CIS
+ * @s:		the struct pcmcia_socket where the card is inserted
+ * @function:	the device function we loop for
+ * @code:	which CIS code shall we look for?
+ * @parse:	buffer where the tuple shall be parsed (or NULL, if no parse)
+ * @priv_data:	private data to be passed to the loop_tuple function.
+ * @loop_tuple:	function to call for each CIS entry of type @function. IT
+ *		gets passed the raw tuple, the paresed tuple (if @parse is
+ *		set) and @priv_data.
+ *
+ * pccard_loop_tuple() loops over all CIS entries of type @function, and
+ * calls the @loop_tuple function for each entry. If the call to @loop_tuple
+ * returns 0, the loop exits. Returns 0 on success or errorcode otherwise.
+ */
+int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function,
+		      cisdata_t code, cisparse_t *parse, void *priv_data,
+		      int (*loop_tuple) (tuple_t *tuple,
+					 cisparse_t *parse,
+					 void *priv_data))
+{
+	tuple_t tuple;
+	cisdata_t *buf;
+	int ret;
+
+	buf = kzalloc(256, GFP_KERNEL);
+	if (buf == NULL) {
+		dev_printk(KERN_WARNING, &s->dev, "no memory to read tuple\n");
+		return -ENOMEM;
+	}
+
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = 255;
+	tuple.TupleOffset = 0;
+	tuple.DesiredTuple = code;
+	tuple.Attributes = 0;
+
+	ret = pccard_get_first_tuple(s, function, &tuple);
+	while (!ret) {
+		if (pccard_get_tuple_data(s, &tuple))
+			goto next_entry;
+
+		if (parse)
+			if (pcmcia_parse_tuple(&tuple, parse))
+				goto next_entry;
+
+		ret = loop_tuple(&tuple, parse, priv_data);
+		if (!ret)
+			break;
+
+next_entry:
+		ret = pccard_get_next_tuple(s, function, &tuple);
+	}
+
+	kfree(buf);
+	return ret;
+}
+EXPORT_SYMBOL(pccard_loop_tuple);
+
+
 /*======================================================================
 
     This tries to determine if a card has a sensible CIS.  It returns
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 698d75c..790af87 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -61,17 +61,6 @@
 /* Access speed for attribute memory windows */
 INT_MODULE_PARM(cis_speed,	300);		/* ns */
 
-#ifdef CONFIG_PCMCIA_DEBUG
-static int pc_debug;
-
-module_param(pc_debug, int, 0644);
-
-int cs_debug_level(int level)
-{
-	return pc_debug > level;
-}
-#endif
-
 
 socket_state_t dead_socket = {
 	.csc_mask	= SS_DETECT,
@@ -190,7 +179,7 @@
 	if (!socket || !socket->ops || !socket->dev.parent || !socket->resource_ops)
 		return -EINVAL;
 
-	cs_dbg(socket, 0, "pcmcia_register_socket(0x%p)\n", socket->ops);
+	dev_dbg(&socket->dev, "pcmcia_register_socket(0x%p)\n", socket->ops);
 
 	spin_lock_init(&socket->lock);
 
@@ -262,6 +251,13 @@
 
 	pcmcia_parse_events(socket, SS_DETECT);
 
+	/*
+	 * Let's try to get the PCMCIA module for 16-bit PCMCIA support.
+	 * If it fails, it doesn't matter -- we still have 32-bit CardBus
+	 * support to offer, so this is not a failure mode.
+	 */
+	request_module_nowait("pcmcia");
+
 	return 0;
 
  err:
@@ -282,7 +278,7 @@
 	if (!socket)
 		return;
 
-	cs_dbg(socket, 0, "pcmcia_unregister_socket(0x%p)\n", socket->ops);
+	dev_dbg(&socket->dev, "pcmcia_unregister_socket(0x%p)\n", socket->ops);
 
 	if (socket->thread)
 		kthread_stop(socket->thread);
@@ -335,7 +331,7 @@
 	if (s->state & SOCKET_CARDBUS)
 		return 0;
 
-	cs_dbg(s, 1, "send_event(event %d, pri %d, callback 0x%p)\n",
+	dev_dbg(&s->dev, "send_event(event %d, pri %d, callback 0x%p)\n",
 	   event, priority, s->callback);
 
 	if (!s->callback)
@@ -352,7 +348,7 @@
 
 static void socket_remove_drivers(struct pcmcia_socket *skt)
 {
-	cs_dbg(skt, 4, "remove_drivers\n");
+	dev_dbg(&skt->dev, "remove_drivers\n");
 
 	send_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
 }
@@ -361,7 +357,7 @@
 {
 	int status, i;
 
-	cs_dbg(skt, 4, "reset\n");
+	dev_dbg(&skt->dev, "reset\n");
 
 	skt->socket.flags |= SS_OUTPUT_ENA | SS_RESET;
 	skt->ops->set_socket(skt, &skt->socket);
@@ -383,7 +379,7 @@
 		msleep(unreset_check * 10);
 	}
 
-	cs_err(skt, "time out after reset.\n");
+	dev_printk(KERN_ERR, &skt->dev, "time out after reset.\n");
 	return -ETIMEDOUT;
 }
 
@@ -397,7 +393,7 @@
 {
 	int status;
 
-	cs_dbg(s, 4, "shutdown\n");
+	dev_dbg(&s->dev, "shutdown\n");
 
 	socket_remove_drivers(s);
 	s->state &= SOCKET_INUSE | SOCKET_PRESENT;
@@ -432,7 +428,7 @@
 {
 	int status, i;
 
-	cs_dbg(skt, 4, "setup\n");
+	dev_dbg(&skt->dev, "setup\n");
 
 	skt->ops->get_status(skt, &status);
 	if (!(status & SS_DETECT))
@@ -452,13 +448,15 @@
 	}
 
 	if (status & SS_PENDING) {
-		cs_err(skt, "voltage interrogation timed out.\n");
+		dev_printk(KERN_ERR, &skt->dev,
+			   "voltage interrogation timed out.\n");
 		return -ETIMEDOUT;
 	}
 
 	if (status & SS_CARDBUS) {
 		if (!(skt->features & SS_CAP_CARDBUS)) {
-			cs_err(skt, "cardbus cards are not supported.\n");
+			dev_printk(KERN_ERR, &skt->dev,
+				"cardbus cards are not supported.\n");
 			return -EINVAL;
 		}
 		skt->state |= SOCKET_CARDBUS;
@@ -472,7 +470,7 @@
 	else if (!(status & SS_XVCARD))
 		skt->socket.Vcc = skt->socket.Vpp = 50;
 	else {
-		cs_err(skt, "unsupported voltage key.\n");
+		dev_printk(KERN_ERR, &skt->dev, "unsupported voltage key.\n");
 		return -EIO;
 	}
 
@@ -489,7 +487,7 @@
 
 	skt->ops->get_status(skt, &status);
 	if (!(status & SS_POWERON)) {
-		cs_err(skt, "unable to apply power.\n");
+		dev_printk(KERN_ERR, &skt->dev, "unable to apply power.\n");
 		return -EIO;
 	}
 
@@ -509,7 +507,7 @@
 {
 	int ret;
 
-	cs_dbg(skt, 4, "insert\n");
+	dev_dbg(&skt->dev, "insert\n");
 
 	if (!cs_socket_get(skt))
 		return -ENODEV;
@@ -529,7 +527,7 @@
 			skt->state |= SOCKET_CARDBUS_CONFIG;
 		}
 #endif
-		cs_dbg(skt, 4, "insert done\n");
+		dev_dbg(&skt->dev, "insert done\n");
 
 		send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
 	} else {
@@ -576,7 +574,7 @@
 		 * FIXME: need a better check here for cardbus cards.
 		 */
 		if (verify_cis_cache(skt) != 0) {
-			cs_dbg(skt, 4, "cis mismatch - different card\n");
+			dev_dbg(&skt->dev, "cis mismatch - different card\n");
 			socket_remove_drivers(skt);
 			destroy_cis_cache(skt);
 			/*
@@ -587,7 +585,7 @@
 			msleep(200);
 			send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
 		} else {
-			cs_dbg(skt, 4, "cis matches cache\n");
+			dev_dbg(&skt->dev, "cis matches cache\n");
 			send_event(skt, CS_EVENT_PM_RESUME, CS_EVENT_PRI_LOW);
 		}
 	} else {
@@ -723,7 +721,7 @@
 void pcmcia_parse_events(struct pcmcia_socket *s, u_int events)
 {
 	unsigned long flags;
-	cs_dbg(s, 4, "parse_events: events %08x\n", events);
+	dev_dbg(&s->dev, "parse_events: events %08x\n", events);
 	if (s->thread) {
 		spin_lock_irqsave(&s->thread_lock, flags);
 		s->thread_events |= events;
@@ -773,19 +771,22 @@
 {
 	int ret;
 
-	cs_dbg(skt, 1, "resetting socket\n");
+	dev_dbg(&skt->dev, "resetting socket\n");
 
 	mutex_lock(&skt->skt_mutex);
 	do {
 		if (!(skt->state & SOCKET_PRESENT)) {
+			dev_dbg(&skt->dev, "can't reset, not present\n");
 			ret = -ENODEV;
 			break;
 		}
 		if (skt->state & SOCKET_SUSPEND) {
+			dev_dbg(&skt->dev, "can't reset, suspended\n");
 			ret = -EBUSY;
 			break;
 		}
 		if (skt->state & SOCKET_CARDBUS) {
+			dev_dbg(&skt->dev, "can't reset, is cardbus\n");
 			ret = -EPERM;
 			break;
 		}
@@ -818,7 +819,7 @@
 {
 	int ret;
 
-	cs_dbg(skt, 1, "suspending socket\n");
+	dev_dbg(&skt->dev, "suspending socket\n");
 
 	mutex_lock(&skt->skt_mutex);
 	do {
@@ -848,7 +849,7 @@
 {
 	int ret;
     
-	cs_dbg(skt, 1, "waking up socket\n");
+	dev_dbg(&skt->dev, "waking up socket\n");
 
 	mutex_lock(&skt->skt_mutex);
 	do {
@@ -876,7 +877,7 @@
 {
 	int ret;
     
-	cs_dbg(skt, 1, "user eject request\n");
+	dev_dbg(&skt->dev, "user eject request\n");
 
 	mutex_lock(&skt->skt_mutex);
 	do {
@@ -905,7 +906,7 @@
 {
 	int ret;
 
-	cs_dbg(skt, 1, "user insert request\n");
+	dev_dbg(&skt->dev, "user insert request\n");
 
 	mutex_lock(&skt->skt_mutex);
 	do {
diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h
index 1f4098f..3bc02d5 100644
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@@ -107,28 +107,6 @@
 	}
 }
 
-#ifdef CONFIG_PCMCIA_DEBUG
-extern int cs_debug_level(int);
-
-#define cs_dbg(skt, lvl, fmt, arg...) do {		\
-	if (cs_debug_level(lvl))			\
-		dev_printk(KERN_DEBUG, &skt->dev,	\
-		 "cs: " fmt, ## arg);			\
-} while (0)
-#define __cs_dbg(lvl, fmt, arg...) do {			\
-	if (cs_debug_level(lvl))			\
-		printk(KERN_DEBUG 			\
-		 "cs: " fmt, ## arg);			\
-} while (0)
-
-#else
-#define cs_dbg(skt, lvl, fmt, arg...) do { } while (0)
-#define __cs_dbg(lvl, fmt, arg...) do { } while (0)
-#endif
-
-#define cs_err(skt, fmt, arg...) \
-	dev_printk(KERN_ERR, &skt->dev, "cs: " fmt, ## arg)
-
 
 /*
  * Stuff internal to module "pcmcia_core":
@@ -170,10 +148,6 @@
 extern struct list_head pcmcia_socket_list;
 extern struct class pcmcia_socket_class;
 
-int pcmcia_get_window(struct pcmcia_socket *s,
-		      window_handle_t *handle,
-		      int idx,
-		      win_req_t *req);
 int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c);
 struct pcmcia_socket *pcmcia_get_socket_by_nr(unsigned int nr);
 
@@ -199,6 +173,22 @@
 		       const u8 *data, const size_t len);
 int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count);
 
+/* loop over CIS entries */
+int pccard_loop_tuple(struct pcmcia_socket *s, unsigned int function,
+		      cisdata_t code, cisparse_t *parse, void *priv_data,
+		      int (*loop_tuple) (tuple_t *tuple,
+					 cisparse_t *parse,
+					 void *priv_data));
+
+int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function,
+			tuple_t *tuple);
+
+int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function,
+			tuple_t *tuple);
+
+int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
+
+
 /* rsrc_mgr.c */
 int pcmcia_validate_mem(struct pcmcia_socket *s);
 struct resource *pcmcia_find_io_region(unsigned long base,
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index f5b7079..05893d4 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -41,129 +41,11 @@
 MODULE_DESCRIPTION("PCMCIA Driver Services");
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_PCMCIA_DEBUG
-int ds_pc_debug;
-
-module_param_named(pc_debug, ds_pc_debug, int, 0644);
-
-#define ds_dbg(lvl, fmt, arg...) do {				\
-	if (ds_pc_debug > (lvl))				\
-		printk(KERN_DEBUG "ds: " fmt , ## arg);		\
-} while (0)
-#define ds_dev_dbg(lvl, dev, fmt, arg...) do {				\
-	if (ds_pc_debug > (lvl))					\
-		dev_printk(KERN_DEBUG, dev, "ds: " fmt , ## arg);	\
-} while (0)
-#else
-#define ds_dbg(lvl, fmt, arg...) do { } while (0)
-#define ds_dev_dbg(lvl, dev, fmt, arg...) do { } while (0)
-#endif
 
 spinlock_t pcmcia_dev_list_lock;
 
 /*====================================================================*/
 
-/* code which was in cs.c before */
-
-/* String tables for error messages */
-
-typedef struct lookup_t {
-    const int key;
-    const char *msg;
-} lookup_t;
-
-static const lookup_t error_table[] = {
-    { 0,			"Operation succeeded" },
-    { -EIO,			"Input/Output error" },
-    { -ENODEV,			"No card present" },
-    { -EINVAL,			"Bad parameter" },
-    { -EACCES,			"Configuration locked" },
-    { -EBUSY,			"Resource in use" },
-    { -ENOSPC,			"No more items" },
-    { -ENOMEM,			"Out of resource" },
-};
-
-
-static const lookup_t service_table[] = {
-    { AccessConfigurationRegister,	"AccessConfigurationRegister" },
-    { AddSocketServices,		"AddSocketServices" },
-    { AdjustResourceInfo,		"AdjustResourceInfo" },
-    { CheckEraseQueue,			"CheckEraseQueue" },
-    { CloseMemory,			"CloseMemory" },
-    { DeregisterClient,			"DeregisterClient" },
-    { DeregisterEraseQueue,		"DeregisterEraseQueue" },
-    { GetCardServicesInfo,		"GetCardServicesInfo" },
-    { GetClientInfo,			"GetClientInfo" },
-    { GetConfigurationInfo,		"GetConfigurationInfo" },
-    { GetEventMask,			"GetEventMask" },
-    { GetFirstClient,			"GetFirstClient" },
-    { GetFirstRegion,			"GetFirstRegion" },
-    { GetFirstTuple,			"GetFirstTuple" },
-    { GetNextClient,			"GetNextClient" },
-    { GetNextRegion,			"GetNextRegion" },
-    { GetNextTuple,			"GetNextTuple" },
-    { GetStatus,			"GetStatus" },
-    { GetTupleData,			"GetTupleData" },
-    { MapMemPage,			"MapMemPage" },
-    { ModifyConfiguration,		"ModifyConfiguration" },
-    { ModifyWindow,			"ModifyWindow" },
-    { OpenMemory,			"OpenMemory" },
-    { ParseTuple,			"ParseTuple" },
-    { ReadMemory,			"ReadMemory" },
-    { RegisterClient,			"RegisterClient" },
-    { RegisterEraseQueue,		"RegisterEraseQueue" },
-    { RegisterMTD,			"RegisterMTD" },
-    { ReleaseConfiguration,		"ReleaseConfiguration" },
-    { ReleaseIO,			"ReleaseIO" },
-    { ReleaseIRQ,			"ReleaseIRQ" },
-    { ReleaseWindow,			"ReleaseWindow" },
-    { RequestConfiguration,		"RequestConfiguration" },
-    { RequestIO,			"RequestIO" },
-    { RequestIRQ,			"RequestIRQ" },
-    { RequestSocketMask,		"RequestSocketMask" },
-    { RequestWindow,			"RequestWindow" },
-    { ResetCard,			"ResetCard" },
-    { SetEventMask,			"SetEventMask" },
-    { ValidateCIS,			"ValidateCIS" },
-    { WriteMemory,			"WriteMemory" },
-    { BindDevice,			"BindDevice" },
-    { BindMTD,				"BindMTD" },
-    { ReportError,			"ReportError" },
-    { SuspendCard,			"SuspendCard" },
-    { ResumeCard,			"ResumeCard" },
-    { EjectCard,			"EjectCard" },
-    { InsertCard,			"InsertCard" },
-    { ReplaceCIS,			"ReplaceCIS" }
-};
-
-const char *pcmcia_error_func(int func)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(service_table); i++)
-		if (service_table[i].key == func)
-			return service_table[i].msg;
-
-	return "Unknown service number";
-}
-EXPORT_SYMBOL(pcmcia_error_func);
-
-const char *pcmcia_error_ret(int ret)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(error_table); i++)
-		if (error_table[i].key == ret)
-			return error_table[i].msg;
-
-	return "unknown";
-}
-EXPORT_SYMBOL(pcmcia_error_ret);
-
-/*======================================================================*/
-
-
-
 static void pcmcia_check_driver(struct pcmcia_driver *p_drv)
 {
 	struct pcmcia_device_id *did = p_drv->id_table;
@@ -303,7 +185,7 @@
 	spin_lock_init(&driver->dynids.lock);
 	INIT_LIST_HEAD(&driver->dynids.list);
 
-	ds_dbg(3, "registering driver %s\n", driver->drv.name);
+	pr_debug("registering driver %s\n", driver->drv.name);
 
 	error = driver_register(&driver->drv);
 	if (error < 0)
@@ -323,7 +205,7 @@
  */
 void pcmcia_unregister_driver(struct pcmcia_driver *driver)
 {
-	ds_dbg(3, "unregistering driver %s\n", driver->drv.name);
+	pr_debug("unregistering driver %s\n", driver->drv.name);
 	driver_unregister(&driver->drv);
 	pcmcia_free_dynids(driver);
 }
@@ -350,14 +232,14 @@
 static void pcmcia_release_function(struct kref *ref)
 {
 	struct config_t *c = container_of(ref, struct config_t, ref);
-	ds_dbg(1, "releasing config_t\n");
+	pr_debug("releasing config_t\n");
 	kfree(c);
 }
 
 static void pcmcia_release_dev(struct device *dev)
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
-	ds_dev_dbg(1, dev, "releasing device\n");
+	dev_dbg(dev, "releasing device\n");
 	pcmcia_put_socket(p_dev->socket);
 	kfree(p_dev->devname);
 	kref_put(&p_dev->function_config->ref, pcmcia_release_function);
@@ -367,7 +249,7 @@
 static void pcmcia_add_device_later(struct pcmcia_socket *s, int mfc)
 {
 	if (!s->pcmcia_state.device_add_pending) {
-		ds_dev_dbg(1, &s->dev, "scheduling to add %s secondary"
+		dev_dbg(&s->dev, "scheduling to add %s secondary"
 		       " device to %d\n", mfc ? "mfc" : "pfc", s->sock);
 		s->pcmcia_state.device_add_pending = 1;
 		s->pcmcia_state.mfc_pfc = mfc;
@@ -405,7 +287,7 @@
 	 */
 	did = dev_get_drvdata(&p_dev->dev);
 
-	ds_dev_dbg(1, dev, "trying to bind to %s\n", p_drv->drv.name);
+	dev_dbg(dev, "trying to bind to %s\n", p_drv->drv.name);
 
 	if ((!p_drv->probe) || (!p_dev->function_config) ||
 	    (!try_module_get(p_drv->owner))) {
@@ -428,7 +310,7 @@
 
 	ret = p_drv->probe(p_dev);
 	if (ret) {
-		ds_dev_dbg(1, dev, "binding to %s failed with %d\n",
+		dev_dbg(dev, "binding to %s failed with %d\n",
 			   p_drv->drv.name, ret);
 		goto put_module;
 	}
@@ -456,7 +338,7 @@
 	struct pcmcia_device	*tmp;
 	unsigned long		flags;
 
-	ds_dev_dbg(2, leftover ? &leftover->dev : &s->dev,
+	dev_dbg(leftover ? &leftover->dev : &s->dev,
 		   "pcmcia_card_remove(%d) %s\n", s->sock,
 		   leftover ? leftover->devname : "");
 
@@ -475,7 +357,7 @@
 		p_dev->_removed=1;
 		spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
 
-		ds_dev_dbg(2, &p_dev->dev, "unregistering device\n");
+		dev_dbg(&p_dev->dev, "unregistering device\n");
 		device_unregister(&p_dev->dev);
 	}
 
@@ -492,7 +374,7 @@
 	p_dev = to_pcmcia_dev(dev);
 	p_drv = to_pcmcia_drv(dev->driver);
 
-	ds_dev_dbg(1, dev, "removing device\n");
+	dev_dbg(dev, "removing device\n");
 
 	/* If we're removing the primary module driving a
 	 * pseudo multi-function card, we need to unbind
@@ -572,7 +454,7 @@
 		}
 		if (!pccard_read_tuple(p_dev->socket, p_dev->func,
 				      CISTPL_DEVICE_GEO, devgeo)) {
-			ds_dev_dbg(0, &p_dev->dev,
+			dev_dbg(&p_dev->dev,
 				   "mem device geometry probably means "
 				   "FUNCID_MEMORY\n");
 			p_dev->func_id = CISTPL_FUNCID_MEMORY;
@@ -628,7 +510,7 @@
 
 	mutex_lock(&device_add_lock);
 
-	ds_dbg(3, "adding device to %d, function %d\n", s->sock, function);
+	pr_debug("adding device to %d, function %d\n", s->sock, function);
 
 	/* max of 4 devices per card */
 	if (s->device_count == 4)
@@ -654,7 +536,7 @@
 	p_dev->devname = kasprintf(GFP_KERNEL, "pcmcia%s", dev_name(&p_dev->dev));
 	if (!p_dev->devname)
 		goto err_free;
-	ds_dev_dbg(3, &p_dev->dev, "devname is %s\n", p_dev->devname);
+	dev_dbg(&p_dev->dev, "devname is %s\n", p_dev->devname);
 
 	spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
 
@@ -677,7 +559,7 @@
 	spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
 
 	if (!p_dev->function_config) {
-		ds_dev_dbg(3, &p_dev->dev, "creating config_t\n");
+		dev_dbg(&p_dev->dev, "creating config_t\n");
 		p_dev->function_config = kzalloc(sizeof(struct config_t),
 						 GFP_KERNEL);
 		if (!p_dev->function_config)
@@ -722,20 +604,20 @@
 	int ret = 0;
 
 	if (!(s->resource_setup_done)) {
-		ds_dev_dbg(3, &s->dev,
+		dev_dbg(&s->dev,
 			   "no resources available, delaying card_add\n");
 		return -EAGAIN; /* try again, but later... */
 	}
 
 	if (pcmcia_validate_mem(s)) {
-		ds_dev_dbg(3, &s->dev, "validating mem resources failed, "
+		dev_dbg(&s->dev, "validating mem resources failed, "
 		       "delaying card_add\n");
 		return -EAGAIN; /* try again, but later... */
 	}
 
 	ret = pccard_validate_cis(s, &no_chains);
 	if (ret || !no_chains) {
-		ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
+		dev_dbg(&s->dev, "invalid CIS or invalid resources\n");
 		return -ENODEV;
 	}
 
@@ -756,7 +638,7 @@
 {
 	struct pcmcia_socket *s =
 		container_of(work, struct pcmcia_socket, device_add);
-	ds_dev_dbg(1, &s->dev, "adding additional device to %d\n", s->sock);
+	dev_dbg(&s->dev, "adding additional device to %d\n", s->sock);
 	pcmcia_device_add(s, s->pcmcia_state.mfc_pfc);
 	s->pcmcia_state.device_add_pending = 0;
 	s->pcmcia_state.mfc_pfc = 0;
@@ -766,7 +648,7 @@
 {
 	struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
 	if (!p_dev->dev.driver) {
-		ds_dev_dbg(1, dev, "update device information\n");
+		dev_dbg(dev, "update device information\n");
 		pcmcia_device_query(p_dev);
 	}
 
@@ -780,7 +662,7 @@
 	unsigned long flags;
 
 	/* must be called with skt_mutex held */
-	ds_dev_dbg(0, &skt->dev, "re-scanning socket %d\n", skt->sock);
+	dev_dbg(&skt->dev, "re-scanning socket %d\n", skt->sock);
 
 	spin_lock_irqsave(&pcmcia_dev_list_lock, flags);
 	if (list_empty(&skt->devices_list))
@@ -835,7 +717,7 @@
 	if (!filename)
 		return -EINVAL;
 
-	ds_dev_dbg(1, &dev->dev, "trying to load CIS file %s\n", filename);
+	dev_dbg(&dev->dev, "trying to load CIS file %s\n", filename);
 
 	if (request_firmware(&fw, filename, &dev->dev) == 0) {
 		if (fw->size >= CISTPL_MAX_CIS_SIZE) {
@@ -953,14 +835,14 @@
 		 * after it has re-checked that there is no possible module
 		 * with a prod_id/manf_id/card_id match.
 		 */
-		ds_dev_dbg(0, &dev->dev,
+		dev_dbg(&dev->dev,
 			"skipping FUNC_ID match until userspace interaction\n");
 		if (!dev->allow_func_id_match)
 			return 0;
 	}
 
 	if (did->match_flags & PCMCIA_DEV_ID_MATCH_FAKE_CIS) {
-		ds_dev_dbg(0, &dev->dev, "device needs a fake CIS\n");
+		dev_dbg(&dev->dev, "device needs a fake CIS\n");
 		if (!dev->socket->fake_cis)
 			pcmcia_load_firmware(dev, did->cisfile);
 
@@ -992,9 +874,9 @@
 	/* match dynamic devices first */
 	spin_lock(&p_drv->dynids.lock);
 	list_for_each_entry(dynid, &p_drv->dynids.list, node) {
-		ds_dev_dbg(3, dev, "trying to match to %s\n", drv->name);
+		dev_dbg(dev, "trying to match to %s\n", drv->name);
 		if (pcmcia_devmatch(p_dev, &dynid->id)) {
-			ds_dev_dbg(0, dev, "matched to %s\n", drv->name);
+			dev_dbg(dev, "matched to %s\n", drv->name);
 			spin_unlock(&p_drv->dynids.lock);
 			return 1;
 		}
@@ -1004,15 +886,15 @@
 #ifdef CONFIG_PCMCIA_IOCTL
 	/* matching by cardmgr */
 	if (p_dev->cardmgr == p_drv) {
-		ds_dev_dbg(0, dev, "cardmgr matched to %s\n", drv->name);
+		dev_dbg(dev, "cardmgr matched to %s\n", drv->name);
 		return 1;
 	}
 #endif
 
 	while (did && did->match_flags) {
-		ds_dev_dbg(3, dev, "trying to match to %s\n", drv->name);
+		dev_dbg(dev, "trying to match to %s\n", drv->name);
 		if (pcmcia_devmatch(p_dev, did)) {
-			ds_dev_dbg(0, dev, "matched to %s\n", drv->name);
+			dev_dbg(dev, "matched to %s\n", drv->name);
 			return 1;
 		}
 		did++;
@@ -1218,7 +1100,7 @@
 	if (p_dev->suspended)
 		return 0;
 
-	ds_dev_dbg(2, dev, "suspending\n");
+	dev_dbg(dev, "suspending\n");
 
 	if (dev->driver)
 		p_drv = to_pcmcia_drv(dev->driver);
@@ -1238,7 +1120,7 @@
 	}
 
 	if (p_dev->device_no == p_dev->func) {
-		ds_dev_dbg(2, dev, "releasing configuration\n");
+		dev_dbg(dev, "releasing configuration\n");
 		pcmcia_release_configuration(p_dev);
 	}
 
@@ -1258,7 +1140,7 @@
 	if (!p_dev->suspended)
 		return 0;
 
-	ds_dev_dbg(2, dev, "resuming\n");
+	dev_dbg(dev, "resuming\n");
 
 	if (dev->driver)
 		p_drv = to_pcmcia_drv(dev->driver);
@@ -1267,7 +1149,7 @@
 		goto out;
 
 	if (p_dev->device_no == p_dev->func) {
-		ds_dev_dbg(2, dev, "requesting configuration\n");
+		dev_dbg(dev, "requesting configuration\n");
 		ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
 		if (ret)
 			goto out;
@@ -1309,14 +1191,14 @@
 
 static int pcmcia_bus_resume(struct pcmcia_socket *skt)
 {
-	ds_dev_dbg(2, &skt->dev, "resuming socket %d\n", skt->sock);
+	dev_dbg(&skt->dev, "resuming socket %d\n", skt->sock);
 	bus_for_each_dev(&pcmcia_bus_type, NULL, skt, pcmcia_bus_resume_callback);
 	return 0;
 }
 
 static int pcmcia_bus_suspend(struct pcmcia_socket *skt)
 {
-	ds_dev_dbg(2, &skt->dev, "suspending socket %d\n", skt->sock);
+	dev_dbg(&skt->dev, "suspending socket %d\n", skt->sock);
 	if (bus_for_each_dev(&pcmcia_bus_type, NULL, skt,
 			     pcmcia_bus_suspend_callback)) {
 		pcmcia_bus_resume(skt);
@@ -1348,7 +1230,7 @@
 		return -ENODEV;
 	}
 
-	ds_dev_dbg(1, &skt->dev, "ds_event(0x%06x, %d, 0x%p)\n",
+	dev_dbg(&skt->dev, "ds_event(0x%06x, %d, 0x%p)\n",
 		   event, priority, skt);
 
 	switch (event) {
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index a4aacb8..c13fd93 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -63,21 +63,6 @@
 #include "vg468.h"
 #include "ricoh.h"
 
-#ifdef CONFIG_PCMCIA_DEBUG
-static const char version[] =
-"i82365.c 1.265 1999/11/10 18:36:21 (David Hinds)";
-
-static int pc_debug;
-
-module_param(pc_debug, int, 0644);
-
-#define debug(lvl, fmt, arg...) do {				\
-	if (pc_debug > (lvl))					\
-		printk(KERN_DEBUG "i82365: " fmt , ## arg);	\
-} while (0)
-#else
-#define debug(lvl, fmt, arg...) do { } while (0)
-#endif
 
 static irqreturn_t i365_count_irq(int, void *);
 static inline int _check_irq(int irq, int flags)
@@ -501,13 +486,13 @@
 {
     i365_get(irq_sock, I365_CSC);
     irq_hits++;
-    debug(2, "-> hit on irq %d\n", irq);
+    pr_debug("i82365: -> hit on irq %d\n", irq);
     return IRQ_HANDLED;
 }
 
 static u_int __init test_irq(u_short sock, int irq)
 {
-    debug(2, "  testing ISA irq %d\n", irq);
+    pr_debug("i82365:  testing ISA irq %d\n", irq);
     if (request_irq(irq, i365_count_irq, IRQF_PROBE_SHARED, "scan",
 			i365_count_irq) != 0)
 	return 1;
@@ -515,7 +500,7 @@
     msleep(10);
     if (irq_hits) {
 	free_irq(irq, i365_count_irq);
-	debug(2, "    spurious hit!\n");
+	pr_debug("i82365:    spurious hit!\n");
 	return 1;
     }
 
@@ -528,7 +513,7 @@
 
     /* mask all interrupts */
     i365_set(sock, I365_CSCINT, 0);
-    debug(2, "    hits = %d\n", irq_hits);
+    pr_debug("i82365:    hits = %d\n", irq_hits);
     
     return (irq_hits != 1);
 }
@@ -854,7 +839,7 @@
     u_long flags = 0;
     int handled = 0;
 
-    debug(4, "pcic_interrupt(%d)\n", irq);
+    pr_debug("pcic_interrupt(%d)\n", irq);
 
     for (j = 0; j < 20; j++) {
 	active = 0;
@@ -878,7 +863,7 @@
 		events |= (csc & I365_CSC_READY) ? SS_READY : 0;
 	    }
 	    ISA_UNLOCK(i, flags);
-	    debug(2, "socket %d event 0x%02x\n", i, events);
+	    pr_debug("socket %d event 0x%02x\n", i, events);
 
 	    if (events)
 		pcmcia_parse_events(&socket[i].socket, events);
@@ -890,7 +875,7 @@
     if (j == 20)
 	printk(KERN_NOTICE "i82365: infinite loop in interrupt handler\n");
 
-    debug(4, "interrupt done\n");
+    pr_debug("pcic_interrupt done\n");
     return IRQ_RETVAL(handled);
 } /* pcic_interrupt */
 
@@ -932,7 +917,7 @@
 	}
     }
     
-    debug(1, "GetStatus(%d) = %#4.4x\n", sock, *value);
+    pr_debug("GetStatus(%d) = %#4.4x\n", sock, *value);
     return 0;
 } /* i365_get_status */
 
@@ -943,7 +928,7 @@
     struct i82365_socket *t = &socket[sock];
     u_char reg;
     
-    debug(1, "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+    pr_debug("SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
 	  "io_irq %d, csc_mask %#2.2x)\n", sock, state->flags,
 	  state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
     
@@ -1052,7 +1037,7 @@
 {
     u_char map, ioctl;
     
-    debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
+    pr_debug("SetIOMap(%d, %d, %#2.2x, %d ns, "
 	  "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed,
 	  (unsigned long long)io->start, (unsigned long long)io->stop);
     map = io->map;
@@ -1082,7 +1067,7 @@
     u_short base, i;
     u_char map;
     
-    debug(1, "SetMemMap(%d, %d, %#2.2x, %d ns, %#llx-%#llx, "
+    pr_debug("SetMemMap(%d, %d, %#2.2x, %d ns, %#llx-%#llx, "
 	  "%#x)\n", sock, mem->map, mem->flags, mem->speed,
 	  (unsigned long long)mem->res->start,
 	  (unsigned long long)mem->res->end, mem->card_start);
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 7dfbee1..26a621c 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -38,17 +38,6 @@
 
 #include "m32r_cfc.h"
 
-#ifdef CONFIG_PCMCIA_DEBUG
-static int m32r_cfc_debug;
-module_param(m32r_cfc_debug, int, 0644);
-#define debug(lvl, fmt, arg...) do {				\
-	if (m32r_cfc_debug > (lvl))				\
-		printk(KERN_DEBUG "m32r_cfc: " fmt , ## arg);	\
-} while (0)
-#else
-#define debug(n, args...) do { } while (0)
-#endif
-
 /* Poll status interval -- 0 means default to interrupt */
 static int poll_interval = 0;
 
@@ -123,7 +112,7 @@
 	unsigned char *bp = (unsigned char *)buf;
 	unsigned long flags;
 
-	debug(3, "m32r_cfc: pcc_ioread_byte: sock=%d, port=%#lx, buf=%p, "
+	pr_debug("m32r_cfc: pcc_ioread_byte: sock=%d, port=%#lx, buf=%p, "
 		 "size=%u, nmemb=%d, flag=%d\n",
 		  sock, port, buf, size, nmemb, flag);
 
@@ -132,7 +121,7 @@
 		printk("m32r_cfc:ioread_byte null port :%#lx\n",port);
 		return;
 	}
-	debug(3, "m32r_cfc: pcc_ioread_byte: addr=%#lx\n", addr);
+	pr_debug("m32r_cfc: pcc_ioread_byte: addr=%#lx\n", addr);
 
 	spin_lock_irqsave(&pcc_lock, flags);
 	/* read Byte */
@@ -148,7 +137,7 @@
 	unsigned short *bp = (unsigned short *)buf;
 	unsigned long flags;
 
-	debug(3, "m32r_cfc: pcc_ioread_word: sock=%d, port=%#lx, "
+	pr_debug("m32r_cfc: pcc_ioread_word: sock=%d, port=%#lx, "
 		 "buf=%p, size=%u, nmemb=%d, flag=%d\n",
 		 sock, port, buf, size, nmemb, flag);
 
@@ -163,7 +152,7 @@
 		printk("m32r_cfc:ioread_word null port :%#lx\n",port);
 		return;
 	}
-	debug(3, "m32r_cfc: pcc_ioread_word: addr=%#lx\n", addr);
+	pr_debug("m32r_cfc: pcc_ioread_word: addr=%#lx\n", addr);
 
 	spin_lock_irqsave(&pcc_lock, flags);
 	/* read Word */
@@ -179,7 +168,7 @@
 	unsigned char *bp = (unsigned char *)buf;
 	unsigned long flags;
 
-	debug(3, "m32r_cfc: pcc_iowrite_byte: sock=%d, port=%#lx, "
+	pr_debug("m32r_cfc: pcc_iowrite_byte: sock=%d, port=%#lx, "
 		 "buf=%p, size=%u, nmemb=%d, flag=%d\n",
 		 sock, port, buf, size, nmemb, flag);
 
@@ -189,7 +178,7 @@
 		printk("m32r_cfc:iowrite_byte null port:%#lx\n",port);
 		return;
 	}
-	debug(3, "m32r_cfc: pcc_iowrite_byte: addr=%#lx\n", addr);
+	pr_debug("m32r_cfc: pcc_iowrite_byte: addr=%#lx\n", addr);
 
 	spin_lock_irqsave(&pcc_lock, flags);
 	while (nmemb--)
@@ -204,7 +193,7 @@
 	unsigned short *bp = (unsigned short *)buf;
 	unsigned long flags;
 
-	debug(3, "m32r_cfc: pcc_iowrite_word: sock=%d, port=%#lx, "
+	pr_debug("m32r_cfc: pcc_iowrite_word: sock=%d, port=%#lx, "
 		 "buf=%p, size=%u, nmemb=%d, flag=%d\n",
 		 sock, port, buf, size, nmemb, flag);
 
@@ -226,7 +215,7 @@
 		return;
 	}
 #endif
-	debug(3, "m32r_cfc: pcc_iowrite_word: addr=%#lx\n", addr);
+	pr_debug("m32r_cfc: pcc_iowrite_word: addr=%#lx\n", addr);
 
 	spin_lock_irqsave(&pcc_lock, flags);
 	while (nmemb--)
@@ -262,7 +251,7 @@
 static unsigned int pcc_get(u_short sock, unsigned int reg)
 {
 	unsigned int val = inw(reg);
-	debug(3, "m32r_cfc: pcc_get: reg(0x%08x)=0x%04x\n", reg, val);
+	pr_debug("m32r_cfc: pcc_get: reg(0x%08x)=0x%04x\n", reg, val);
 	return val;
 }
 
@@ -270,7 +259,7 @@
 static void pcc_set(u_short sock, unsigned int reg, unsigned int data)
 {
 	outw(data, reg);
-	debug(3, "m32r_cfc: pcc_set: reg(0x%08x)=0x%04x\n", reg, data);
+	pr_debug("m32r_cfc: pcc_set: reg(0x%08x)=0x%04x\n", reg, data);
 }
 
 /*======================================================================
@@ -286,14 +275,14 @@
 {
 	unsigned int stat;
 
-	debug(3, "m32r_cfc: is_alive:\n");
+	pr_debug("m32r_cfc: is_alive:\n");
 
 	printk("CF: ");
 	stat = pcc_get(sock, (unsigned int)PLD_CFSTS);
 	if (!stat)
 		printk("No ");
 	printk("Card is detected at socket %d : stat = 0x%08x\n", sock, stat);
-	debug(3, "m32r_cfc: is_alive: sock stat is 0x%04x\n", stat);
+	pr_debug("m32r_cfc: is_alive: sock stat is 0x%04x\n", stat);
 
 	return 0;
 }
@@ -303,7 +292,7 @@
 {
 	pcc_socket_t *t = &socket[pcc_sockets];
 
-	debug(3, "m32r_cfc: add_pcc_socket: base=%#lx, irq=%d, "
+	pr_debug("m32r_cfc: add_pcc_socket: base=%#lx, irq=%d, "
 		 "mapaddr=%#lx, ioaddr=%08x\n",
 		 base, irq, mapaddr, ioaddr);
 
@@ -358,7 +347,7 @@
 	/* eject interrupt */
 	request_irq(irq+1, pcc_interrupt, 0, "m32r_cfc", pcc_interrupt);
 #endif
-	debug(3, "m32r_cfc: enable CFMSK, RDYSEL\n");
+	pr_debug("m32r_cfc: enable CFMSK, RDYSEL\n");
 	pcc_set(pcc_sockets, (unsigned int)PLD_CFIMASK, 0x01);
 #endif	/* CONFIG_PLAT_USRV */
 #if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV) || defined(CONFIG_PLAT_OPSPUT)
@@ -378,26 +367,26 @@
 	u_int events = 0;
 	int handled = 0;
 
-	debug(3, "m32r_cfc: pcc_interrupt: irq=%d, dev=%p\n", irq, dev);
+	pr_debug("m32r_cfc: pcc_interrupt: irq=%d, dev=%p\n", irq, dev);
 	for (i = 0; i < pcc_sockets; i++) {
 		if (socket[i].cs_irq1 != irq && socket[i].cs_irq2 != irq)
 			continue;
 
 		handled = 1;
-		debug(3, "m32r_cfc: pcc_interrupt: socket %d irq 0x%02x ",
+		pr_debug("m32r_cfc: pcc_interrupt: socket %d irq 0x%02x ",
 			i, irq);
 		events |= SS_DETECT;	/* insert or eject */
 		if (events)
 			pcmcia_parse_events(&socket[i].socket, events);
 	}
-	debug(3, "m32r_cfc: pcc_interrupt: done\n");
+	pr_debug("m32r_cfc: pcc_interrupt: done\n");
 
 	return IRQ_RETVAL(handled);
 } /* pcc_interrupt */
 
 static void pcc_interrupt_wrapper(u_long data)
 {
-	debug(3, "m32r_cfc: pcc_interrupt_wrapper:\n");
+	pr_debug("m32r_cfc: pcc_interrupt_wrapper:\n");
 	pcc_interrupt(0, NULL);
 	init_timer(&poll_timer);
 	poll_timer.expires = jiffies + poll_interval;
@@ -410,17 +399,17 @@
 {
 	u_int status;
 
-	debug(3, "m32r_cfc: _pcc_get_status:\n");
+	pr_debug("m32r_cfc: _pcc_get_status:\n");
 	status = pcc_get(sock, (unsigned int)PLD_CFSTS);
 	*value = (status) ? SS_DETECT : 0;
- 	debug(3, "m32r_cfc: _pcc_get_status: status=0x%08x\n", status);
+	pr_debug("m32r_cfc: _pcc_get_status: status=0x%08x\n", status);
 
 #if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV) || defined(CONFIG_PLAT_OPSPUT)
 	if ( status ) {
 		/* enable CF power */
 		status = inw((unsigned int)PLD_CPCR);
 		if (!(status & PLD_CPCR_CF)) {
-			debug(3, "m32r_cfc: _pcc_get_status: "
+			pr_debug("m32r_cfc: _pcc_get_status: "
 				 "power on (CPCR=0x%08x)\n", status);
 			status |= PLD_CPCR_CF;
 			outw(status, (unsigned int)PLD_CPCR);
@@ -439,7 +428,7 @@
 		status &= ~PLD_CPCR_CF;
 		outw(status, (unsigned int)PLD_CPCR);
 		udelay(100);
-		debug(3, "m32r_cfc: _pcc_get_status: "
+		pr_debug("m32r_cfc: _pcc_get_status: "
 			 "power off (CPCR=0x%08x)\n", status);
 	}
 #elif defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3)
@@ -465,13 +454,13 @@
 		/* disable CF power */
 	        pcc_set(sock, (unsigned int)PLD_CPCR, 0);
 		udelay(100);
-		debug(3, "m32r_cfc: _pcc_get_status: "
+		pr_debug("m32r_cfc: _pcc_get_status: "
 			 "power off (CPCR=0x%08x)\n", status);
 	}
 #else
 #error no platform configuration
 #endif
-	debug(3, "m32r_cfc: _pcc_get_status: GetStatus(%d) = %#4.4x\n",
+	pr_debug("m32r_cfc: _pcc_get_status: GetStatus(%d) = %#4.4x\n",
 		 sock, *value);
 	return 0;
 } /* _get_status */
@@ -480,7 +469,7 @@
 
 static int _pcc_set_socket(u_short sock, socket_state_t *state)
 {
-	debug(3, "m32r_cfc: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+	pr_debug("m32r_cfc: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
 		  "io_irq %d, csc_mask %#2.2x)\n", sock, state->flags,
 		  state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
 
@@ -492,41 +481,39 @@
 	}
 #endif
 	if (state->flags & SS_RESET) {
-		debug(3, ":RESET\n");
+		pr_debug(":RESET\n");
 		pcc_set(sock,(unsigned int)PLD_CFRSTCR,0x101);
 	}else{
 		pcc_set(sock,(unsigned int)PLD_CFRSTCR,0x100);
 	}
 	if (state->flags & SS_OUTPUT_ENA){
-		debug(3, ":OUTPUT_ENA\n");
+		pr_debug(":OUTPUT_ENA\n");
 		/* bit clear */
 		pcc_set(sock,(unsigned int)PLD_CFBUFCR,0);
 	} else {
 		pcc_set(sock,(unsigned int)PLD_CFBUFCR,1);
 	}
 
-#ifdef CONFIG_PCMCIA_DEBUG
 	if(state->flags & SS_IOCARD){
-		debug(3, ":IOCARD");
+		pr_debug(":IOCARD");
 	}
 	if (state->flags & SS_PWR_AUTO) {
-		debug(3, ":PWR_AUTO");
+		pr_debug(":PWR_AUTO");
 	}
 	if (state->csc_mask & SS_DETECT)
-		debug(3, ":csc-SS_DETECT");
+		pr_debug(":csc-SS_DETECT");
 	if (state->flags & SS_IOCARD) {
 		if (state->csc_mask & SS_STSCHG)
-			debug(3, ":STSCHG");
+			pr_debug(":STSCHG");
 	} else {
 		if (state->csc_mask & SS_BATDEAD)
-			debug(3, ":BATDEAD");
+			pr_debug(":BATDEAD");
 		if (state->csc_mask & SS_BATWARN)
-			debug(3, ":BATWARN");
+			pr_debug(":BATWARN");
 		if (state->csc_mask & SS_READY)
-			debug(3, ":READY");
+			pr_debug(":READY");
 	}
-	debug(3, "\n");
-#endif
+	pr_debug("\n");
 	return 0;
 } /* _set_socket */
 
@@ -536,7 +523,7 @@
 {
 	u_char map;
 
-	debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, "
 		  "%#llx-%#llx)\n", sock, io->map, io->flags,
 		  io->speed, (unsigned long long)io->start,
 		  (unsigned long long)io->stop);
@@ -554,7 +541,7 @@
 	u_long addr;
 	pcc_socket_t *t = &socket[sock];
 
-	debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, "
 		 "%#llx, %#x)\n", sock, map, mem->flags,
 		 mem->speed, (unsigned long long)mem->static_start,
 		 mem->card_start);
@@ -640,11 +627,11 @@
 	unsigned int sock = container_of(s, struct pcc_socket, socket)->number;
 
 	if (socket[sock].flags & IS_ALIVE) {
-		debug(3, "m32r_cfc: pcc_get_status: sock(%d) -EINVAL\n", sock);
+		dev_dbg(&s->dev, "pcc_get_status: sock(%d) -EINVAL\n", sock);
 		*value = 0;
 		return -EINVAL;
 	}
-	debug(3, "m32r_cfc: pcc_get_status: sock(%d)\n", sock);
+	dev_dbg(&s->dev, "pcc_get_status: sock(%d)\n", sock);
 	LOCKED(_pcc_get_status(sock, value));
 }
 
@@ -653,10 +640,10 @@
 	unsigned int sock = container_of(s, struct pcc_socket, socket)->number;
 
 	if (socket[sock].flags & IS_ALIVE) {
-		debug(3, "m32r_cfc: pcc_set_socket: sock(%d) -EINVAL\n", sock);
+		dev_dbg(&s->dev, "pcc_set_socket: sock(%d) -EINVAL\n", sock);
 		return -EINVAL;
 	}
-	debug(3, "m32r_cfc: pcc_set_socket: sock(%d)\n", sock);
+	dev_dbg(&s->dev, "pcc_set_socket: sock(%d)\n", sock);
 	LOCKED(_pcc_set_socket(sock, state));
 }
 
@@ -665,10 +652,10 @@
 	unsigned int sock = container_of(s, struct pcc_socket, socket)->number;
 
 	if (socket[sock].flags & IS_ALIVE) {
-		debug(3, "m32r_cfc: pcc_set_io_map: sock(%d) -EINVAL\n", sock);
+		dev_dbg(&s->dev, "pcc_set_io_map: sock(%d) -EINVAL\n", sock);
 		return -EINVAL;
 	}
-	debug(3, "m32r_cfc: pcc_set_io_map: sock(%d)\n", sock);
+	dev_dbg(&s->dev, "pcc_set_io_map: sock(%d)\n", sock);
 	LOCKED(_pcc_set_io_map(sock, io));
 }
 
@@ -677,16 +664,16 @@
 	unsigned int sock = container_of(s, struct pcc_socket, socket)->number;
 
 	if (socket[sock].flags & IS_ALIVE) {
-		debug(3, "m32r_cfc: pcc_set_mem_map: sock(%d) -EINVAL\n", sock);
+		dev_dbg(&s->dev, "pcc_set_mem_map: sock(%d) -EINVAL\n", sock);
 		return -EINVAL;
 	}
-	debug(3, "m32r_cfc: pcc_set_mem_map: sock(%d)\n", sock);
+	dev_dbg(&s->dev, "pcc_set_mem_map: sock(%d)\n", sock);
 	LOCKED(_pcc_set_mem_map(sock, mem));
 }
 
 static int pcc_init(struct pcmcia_socket *s)
 {
-	debug(3, "m32r_cfc: pcc_init()\n");
+	dev_dbg(&s->dev, "pcc_init()\n");
 	return 0;
 }
 
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index c6524f9..72844c5 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -45,16 +45,6 @@
 
 #define PCC_DEBUG_DBEX
 
-#ifdef CONFIG_PCMCIA_DEBUG
-static int m32r_pcc_debug;
-module_param(m32r_pcc_debug, int, 0644);
-#define debug(lvl, fmt, arg...) do {				\
-	if (m32r_pcc_debug > (lvl))				\
-		printk(KERN_DEBUG "m32r_pcc: " fmt , ## arg);	\
-} while (0)
-#else
-#define debug(n, args...) do { } while (0)
-#endif
 
 /* Poll status interval -- 0 means default to interrupt */
 static int poll_interval = 0;
@@ -358,7 +348,7 @@
 	u_int events, active;
 	int handled = 0;
 
-	debug(4, "m32r: pcc_interrupt(%d)\n", irq);
+	pr_debug("m32r_pcc: pcc_interrupt(%d)\n", irq);
 
 	for (j = 0; j < 20; j++) {
 		active = 0;
@@ -369,13 +359,14 @@
 			handled = 1;
 			irc = pcc_get(i, PCIRC);
 			irc >>=16;
-			debug(2, "m32r-pcc:interrupt: socket %d pcirc 0x%02x ", i, irc);
+			pr_debug("m32r_pcc: interrupt: socket %d pcirc 0x%02x ",
+				i, irc);
 			if (!irc)
 				continue;
 
 			events = (irc) ? SS_DETECT : 0;
 			events |= (pcc_get(i,PCCR) & PCCR_PCEN) ? SS_READY : 0;
-			debug(2, " event 0x%02x\n", events);
+			pr_debug("m32r_pcc: event 0x%02x\n", events);
 
 			if (events)
 				pcmcia_parse_events(&socket[i].socket, events);
@@ -388,7 +379,7 @@
 	if (j == 20)
 		printk(KERN_NOTICE "m32r-pcc: infinite loop in interrupt handler\n");
 
-	debug(4, "m32r-pcc: interrupt done\n");
+	pr_debug("m32r_pcc: interrupt done\n");
 
 	return IRQ_RETVAL(handled);
 } /* pcc_interrupt */
@@ -422,7 +413,7 @@
 	status = pcc_get(sock,PCCSIGCR);
 	*value |= (status & PCCSIGCR_VEN) ? SS_POWERON : 0;
 
-	debug(3, "m32r-pcc: GetStatus(%d) = %#4.4x\n", sock, *value);
+	pr_debug("m32r_pcc: GetStatus(%d) = %#4.4x\n", sock, *value);
 	return 0;
 } /* _get_status */
 
@@ -432,7 +423,7 @@
 {
 	u_long reg = 0;
 
-	debug(3, "m32r-pcc: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+	pr_debug("m32r_pcc: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
 		  "io_irq %d, csc_mask %#2.2x)", sock, state->flags,
 		  state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
 
@@ -448,11 +439,11 @@
 	}
 
 	if (state->flags & SS_RESET) {
-		debug(3, ":RESET\n");
+		pr_debug("m32r_pcc: :RESET\n");
 		reg |= PCCSIGCR_CRST;
 	}
 	if (state->flags & SS_OUTPUT_ENA){
-		debug(3, ":OUTPUT_ENA\n");
+		pr_debug("m32r_pcc: :OUTPUT_ENA\n");
 		/* bit clear */
 	} else {
 		reg |= PCCSIGCR_SEN;
@@ -460,28 +451,26 @@
 
 	pcc_set(sock,PCCSIGCR,reg);
 
-#ifdef CONFIG_PCMCIA_DEBUG
 	if(state->flags & SS_IOCARD){
-		debug(3, ":IOCARD");
+		pr_debug("m32r_pcc: :IOCARD");
 	}
 	if (state->flags & SS_PWR_AUTO) {
-		debug(3, ":PWR_AUTO");
+		pr_debug("m32r_pcc: :PWR_AUTO");
 	}
 	if (state->csc_mask & SS_DETECT)
-		debug(3, ":csc-SS_DETECT");
+		pr_debug("m32r_pcc: :csc-SS_DETECT");
 	if (state->flags & SS_IOCARD) {
 		if (state->csc_mask & SS_STSCHG)
-			debug(3, ":STSCHG");
+			pr_debug("m32r_pcc: :STSCHG");
 	} else {
 		if (state->csc_mask & SS_BATDEAD)
-			debug(3, ":BATDEAD");
+			pr_debug("m32r_pcc: :BATDEAD");
 		if (state->csc_mask & SS_BATWARN)
-			debug(3, ":BATWARN");
+			pr_debug("m32r_pcc: :BATWARN");
 		if (state->csc_mask & SS_READY)
-			debug(3, ":READY");
+			pr_debug("m32r_pcc: :READY");
 	}
-	debug(3, "\n");
-#endif
+	pr_debug("m32r_pcc: \n");
 	return 0;
 } /* _set_socket */
 
@@ -491,7 +480,7 @@
 {
 	u_char map;
 
-	debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m32r_pcc: SetIOMap(%d, %d, %#2.2x, %d ns, "
 		  "%#llx-%#llx)\n", sock, io->map, io->flags,
 		  io->speed, (unsigned long long)io->start,
 		  (unsigned long long)io->stop);
@@ -515,7 +504,7 @@
 #endif
 #endif
 
-	debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m32r_pcc: SetMemMap(%d, %d, %#2.2x, %d ns, "
 		 "%#llx,  %#x)\n", sock, map, mem->flags,
 		 mem->speed, (unsigned long long)mem->static_start,
 		 mem->card_start);
@@ -662,7 +651,7 @@
 
 static int pcc_init(struct pcmcia_socket *s)
 {
-	debug(4, "m32r-pcc: init call\n");
+	pr_debug("m32r_pcc: init call\n");
 	return 0;
 }
 
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 403559b..7f79c4e 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -64,14 +64,6 @@
 #include <pcmcia/cs.h>
 #include <pcmcia/ss.h>
 
-#ifdef CONFIG_PCMCIA_DEBUG
-static int pc_debug;
-module_param(pc_debug, int, 0);
-#define dprintk(args...) printk(KERN_DEBUG "m8xx_pcmcia: " args);
-#else
-#define dprintk(args...)
-#endif
-
 #define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args)
 #define pcmcia_error(args...) printk(KERN_ERR "m8xx_pcmcia: "args)
 
@@ -565,7 +557,7 @@
 	unsigned int i, events, pscr, pipr, per;
 	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
 
-	dprintk("Interrupt!\n");
+	pr_debug("m8xx_pcmcia: Interrupt!\n");
 	/* get interrupt sources */
 
 	pscr = in_be32(&pcmcia->pcmc_pscr);
@@ -614,7 +606,7 @@
 
 		/* call the handler */
 
-		dprintk("slot %u: events = 0x%02x, pscr = 0x%08x, "
+		pr_debug("m8xx_pcmcia: slot %u: events = 0x%02x, pscr = 0x%08x, "
 			"pipr = 0x%08x\n", i, events, pscr, pipr);
 
 		if (events) {
@@ -641,7 +633,7 @@
 	/* clear the interrupt sources */
 	out_be32(&pcmcia->pcmc_pscr, pscr);
 
-	dprintk("Interrupt done.\n");
+	pr_debug("m8xx_pcmcia: Interrupt done.\n");
 
 	return IRQ_HANDLED;
 }
@@ -815,7 +807,7 @@
 		};
 	}
 
-	dprintk("GetStatus(%d) = %#2.2x\n", lsock, *value);
+	pr_debug("m8xx_pcmcia: GetStatus(%d) = %#2.2x\n", lsock, *value);
 	return 0;
 }
 
@@ -828,7 +820,7 @@
 	unsigned long flags;
 	pcmconf8xx_t *pcmcia = socket[0].pcmcia;
 
-	dprintk("SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+	pr_debug("m8xx_pcmcia: SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
 		"io_irq %d, csc_mask %#2.2x)\n", lsock, state->flags,
 		state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
 
@@ -974,7 +966,7 @@
 #define M8XX_SIZE (io->stop - io->start + 1)
 #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
 
-	dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m8xx_pcmcia: SetIOMap(%d, %d, %#2.2x, %d ns, "
 		"%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
 		io->speed, (unsigned long long)io->start,
 		(unsigned long long)io->stop);
@@ -988,7 +980,7 @@
 
 	if (io->flags & MAP_ACTIVE) {
 
-		dprintk("io->flags & MAP_ACTIVE\n");
+		pr_debug("m8xx_pcmcia: io->flags & MAP_ACTIVE\n");
 
 		winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
 		    + (lsock * PCMCIA_IO_WIN_NO) + io->map;
@@ -1018,8 +1010,8 @@
 
 		out_be32(&w->or, reg);
 
-		dprintk("Socket %u: Mapped io window %u at %#8.8x, "
-			"OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+		pr_debug("m8xx_pcmcia: Socket %u: Mapped io window %u at "
+			"%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
 	} else {
 		/* shutdown IO window */
 		winnr = (PCMCIA_MEM_WIN_NO * PCMCIA_SOCKETS_NO)
@@ -1033,14 +1025,14 @@
 		out_be32(&w->or, 0);	/* turn off window */
 		out_be32(&w->br, 0);	/* turn off base address */
 
-		dprintk("Socket %u: Unmapped io window %u at %#8.8x, "
-			"OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
+		pr_debug("m8xx_pcmcia: Socket %u: Unmapped io window %u at "
+			"%#8.8x, OR = %#8.8x.\n", lsock, io->map, w->br, w->or);
 	}
 
 	/* copy the struct and modify the copy */
 	s->io_win[io->map] = *io;
 	s->io_win[io->map].flags &= (MAP_WRPROT | MAP_16BIT | MAP_ACTIVE);
-	dprintk("SetIOMap exit\n");
+	pr_debug("m8xx_pcmcia: SetIOMap exit\n");
 
 	return 0;
 }
@@ -1055,7 +1047,7 @@
 	unsigned int reg, winnr;
 	pcmconf8xx_t *pcmcia = s->pcmcia;
 
-	dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, "
 		"%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
 		mem->speed, (unsigned long long)mem->static_start,
 		mem->card_start);
@@ -1098,7 +1090,7 @@
 
 	out_be32(&w->or, reg);
 
-	dprintk("Socket %u: Mapped memory window %u at %#8.8x, "
+	pr_debug("m8xx_pcmcia: Socket %u: Mapped memory window %u at %#8.8x, "
 		"OR = %#8.8x.\n", lsock, mem->map, w->br, w->or);
 
 	if (mem->flags & MAP_ACTIVE) {
@@ -1108,7 +1100,7 @@
 		    + mem->card_start;
 	}
 
-	dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
+	pr_debug("m8xx_pcmcia: SetMemMap(%d, %d, %#2.2x, %d ns, "
 		"%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
 		mem->speed, (unsigned long long)mem->static_start,
 		mem->card_start);
@@ -1129,7 +1121,7 @@
 	pccard_io_map io = { 0, 0, 0, 0, 1 };
 	pccard_mem_map mem = { 0, 0, 0, 0, 0, 0 };
 
-	dprintk("sock_init(%d)\n", s);
+	pr_debug("m8xx_pcmcia: sock_init(%d)\n", s);
 
 	m8xx_set_socket(sock, &dead_socket);
 	for (i = 0; i < PCMCIA_IO_WIN_NO; i++) {
diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h
index 72188c4..624442f 100644
--- a/drivers/pcmcia/o2micro.h
+++ b/drivers/pcmcia/o2micro.h
@@ -30,28 +30,6 @@
 #ifndef _LINUX_O2MICRO_H
 #define _LINUX_O2MICRO_H
 
-#ifndef PCI_VENDOR_ID_O2
-#define PCI_VENDOR_ID_O2		0x1217
-#endif
-#ifndef PCI_DEVICE_ID_O2_6729
-#define PCI_DEVICE_ID_O2_6729		0x6729
-#endif
-#ifndef PCI_DEVICE_ID_O2_6730
-#define PCI_DEVICE_ID_O2_6730		0x673a
-#endif
-#ifndef PCI_DEVICE_ID_O2_6832
-#define PCI_DEVICE_ID_O2_6832		0x6832
-#endif
-#ifndef PCI_DEVICE_ID_O2_6836
-#define PCI_DEVICE_ID_O2_6836		0x6836
-#endif
-#ifndef PCI_DEVICE_ID_O2_6812
-#define PCI_DEVICE_ID_O2_6812		0x6872
-#endif
-#ifndef PCI_DEVICE_ID_O2_6933
-#define PCI_DEVICE_ID_O2_6933           0x6933
-#endif
-
 /* Additional PCI configuration registers */
 
 #define O2_MUX_CONTROL		0x90	/* 32 bit */
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 68570bc..663781d 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -23,8 +23,8 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <mach/mux.h>
-#include <mach/tc.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
 
 
 /* NOTE:  don't expect this to support many I/O cards.  The 16xx chips have
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index 30cf71d..c4d7908 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -58,17 +58,6 @@
 } user_info_t;
 
 
-#ifdef CONFIG_PCMCIA_DEBUG
-extern int ds_pc_debug;
-
-#define ds_dbg(lvl, fmt, arg...) do {		\
-	if (ds_pc_debug >= lvl)				\
-		printk(KERN_DEBUG "ds: " fmt , ## arg);		\
-} while (0)
-#else
-#define ds_dbg(lvl, fmt, arg...) do { } while (0)
-#endif
-
 static struct pcmcia_device *get_pcmcia_device(struct pcmcia_socket *s,
 						unsigned int function)
 {
@@ -229,6 +218,61 @@
 	return (ret);
 }
 
+
+/** pcmcia_get_window
+ */
+static int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *wh_out,
+			window_handle_t wh, win_req_t *req)
+{
+	pccard_mem_map *win;
+	window_handle_t w;
+
+	wh--;
+	if (!s || !(s->state & SOCKET_PRESENT))
+		return -ENODEV;
+	if (wh >= MAX_WIN)
+		return -EINVAL;
+	for (w = wh; w < MAX_WIN; w++)
+		if (s->state & SOCKET_WIN_REQ(w))
+			break;
+	if (w == MAX_WIN)
+		return -EINVAL;
+	win = &s->win[w];
+	req->Base = win->res->start;
+	req->Size = win->res->end - win->res->start + 1;
+	req->AccessSpeed = win->speed;
+	req->Attributes = 0;
+	if (win->flags & MAP_ATTRIB)
+		req->Attributes |= WIN_MEMORY_TYPE_AM;
+	if (win->flags & MAP_ACTIVE)
+		req->Attributes |= WIN_ENABLE;
+	if (win->flags & MAP_16BIT)
+		req->Attributes |= WIN_DATA_WIDTH_16;
+	if (win->flags & MAP_USE_WAIT)
+		req->Attributes |= WIN_USE_WAIT;
+
+	*wh_out = w + 1;
+	return 0;
+} /* pcmcia_get_window */
+
+
+/** pcmcia_get_mem_page
+ *
+ * Change the card address of an already open memory window.
+ */
+static int pcmcia_get_mem_page(struct pcmcia_socket *skt, window_handle_t wh,
+			memreq_t *req)
+{
+	wh--;
+	if (wh >= MAX_WIN)
+		return -EINVAL;
+
+	req->Page = 0;
+	req->CardOffset = skt->win[wh].card_start;
+	return 0;
+} /* pcmcia_get_mem_page */
+
+
 /** pccard_get_status
  *
  * Get the current socket state bits.  We don't support the latched
@@ -431,7 +475,7 @@
 	if (!s)
 		return -EINVAL;
 
-	ds_dbg(2, "bind_request(%d, '%s')\n", s->sock,
+	pr_debug("bind_request(%d, '%s')\n", s->sock,
 	       (char *)bind_info->dev_info);
 
 	p_drv = get_pcmcia_driver(&bind_info->dev_info);
@@ -623,7 +667,7 @@
     static int warning_printed = 0;
     int ret = 0;
 
-    ds_dbg(0, "ds_open(socket %d)\n", i);
+    pr_debug("ds_open(socket %d)\n", i);
 
     lock_kernel();
     s = pcmcia_get_socket_by_nr(i);
@@ -685,7 +729,7 @@
     struct pcmcia_socket *s;
     user_info_t *user, **link;
 
-    ds_dbg(0, "ds_release(socket %d)\n", iminor(inode));
+    pr_debug("ds_release(socket %d)\n", iminor(inode));
 
     user = file->private_data;
     if (CHECK_USER(user))
@@ -719,7 +763,7 @@
     user_info_t *user;
     int ret;
 
-    ds_dbg(2, "ds_read(socket %d)\n", iminor(file->f_path.dentry->d_inode));
+    pr_debug("ds_read(socket %d)\n", iminor(file->f_path.dentry->d_inode));
 
     if (count < 4)
 	return -EINVAL;
@@ -744,7 +788,7 @@
 static ssize_t ds_write(struct file *file, const char __user *buf,
 			size_t count, loff_t *ppos)
 {
-    ds_dbg(2, "ds_write(socket %d)\n", iminor(file->f_path.dentry->d_inode));
+    pr_debug("ds_write(socket %d)\n", iminor(file->f_path.dentry->d_inode));
 
     if (count != 4)
 	return -EINVAL;
@@ -762,7 +806,7 @@
     struct pcmcia_socket *s;
     user_info_t *user;
 
-    ds_dbg(2, "ds_poll(socket %d)\n", iminor(file->f_path.dentry->d_inode));
+    pr_debug("ds_poll(socket %d)\n", iminor(file->f_path.dentry->d_inode));
 
     user = file->private_data;
     if (CHECK_USER(user))
@@ -790,7 +834,7 @@
     ds_ioctl_arg_t *buf;
     user_info_t *user;
 
-    ds_dbg(2, "ds_ioctl(socket %d, %#x, %#lx)\n", iminor(inode), cmd, arg);
+    pr_debug("ds_ioctl(socket %d, %#x, %#lx)\n", iminor(inode), cmd, arg);
 
     user = file->private_data;
     if (CHECK_USER(user))
@@ -809,13 +853,13 @@
 
     if (cmd & IOC_IN) {
 	if (!access_ok(VERIFY_READ, uarg, size)) {
-	    ds_dbg(3, "ds_ioctl(): verify_read = %d\n", -EFAULT);
+	    pr_debug("ds_ioctl(): verify_read = %d\n", -EFAULT);
 	    return -EFAULT;
 	}
     }
     if (cmd & IOC_OUT) {
 	if (!access_ok(VERIFY_WRITE, uarg, size)) {
-	    ds_dbg(3, "ds_ioctl(): verify_write = %d\n", -EFAULT);
+	    pr_debug("ds_ioctl(): verify_write = %d\n", -EFAULT);
 	    return -EFAULT;
 	}
     }
@@ -927,15 +971,15 @@
 	goto free_out;
 	break;
     case DS_GET_FIRST_WINDOW:
-	ret = pcmcia_get_window(s, &buf->win_info.handle, 0,
+	ret = pcmcia_get_window(s, &buf->win_info.handle, 1,
 			&buf->win_info.window);
 	break;
     case DS_GET_NEXT_WINDOW:
 	ret = pcmcia_get_window(s, &buf->win_info.handle,
-			buf->win_info.handle->index + 1, &buf->win_info.window);
+			buf->win_info.handle + 1, &buf->win_info.window);
 	break;
     case DS_GET_MEM_PAGE:
-	ret = pcmcia_get_mem_page(buf->win_info.handle,
+	ret = pcmcia_get_mem_page(s, buf->win_info.handle,
 			   &buf->win_info.map);
 	break;
     case DS_REPLACE_CIS:
@@ -962,7 +1006,7 @@
     }
 
     if ((err == 0) && (ret != 0)) {
-	ds_dbg(2, "ds_ioctl: ret = %d\n", ret);
+	pr_debug("ds_ioctl: ret = %d\n", ret);
 	switch (ret) {
 	case -ENODEV:
 	case -EINVAL:
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index d919e96..a8bf8c1 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/device.h>
+#include <linux/netdevice.h>
 
 #include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
@@ -43,21 +44,6 @@
 #endif
 
 
-#ifdef CONFIG_PCMCIA_DEBUG
-extern int ds_pc_debug;
-
-#define ds_dbg(skt, lvl, fmt, arg...) do {			\
-	if (ds_pc_debug >= lvl)					\
-		dev_printk(KERN_DEBUG, &skt->dev,		\
-			   "pcmcia_resource: " fmt,		\
-			   ## arg);				\
-} while (0)
-#else
-#define ds_dbg(skt, lvl, fmt, arg...) do { } while (0)
-#endif
-
-
-
 /** alloc_io_space
  *
  * Special stuff for managing IO windows, because they are scarce
@@ -72,14 +58,14 @@
 	align = (*base) ? (lines ? 1<<lines : 0) : 1;
 	if (align && (align < num)) {
 		if (*base) {
-			ds_dbg(s, 0, "odd IO request: num %#x align %#x\n",
+			dev_dbg(&s->dev, "odd IO request: num %#x align %#x\n",
 			       num, align);
 			align = 0;
 		} else
 			while (align && (align < num)) align <<= 1;
 	}
 	if (*base & ~(align-1)) {
-		ds_dbg(s, 0, "odd IO request: base %#x align %#x\n",
+		dev_dbg(&s->dev, "odd IO request: base %#x align %#x\n",
 		       *base, align);
 		align = 0;
 	}
@@ -173,8 +159,10 @@
 	s = p_dev->socket;
 	c = p_dev->function_config;
 
-	if (!(c->state & CONFIG_LOCKED))
+	if (!(c->state & CONFIG_LOCKED)) {
+		dev_dbg(&s->dev, "Configuration isnt't locked\n");
 		return -EACCES;
+	}
 
 	addr = (c->ConfigBase + reg->Offset) >> 1;
 
@@ -188,6 +176,7 @@
 		pcmcia_write_cis_mem(s, 1, addr, 1, &val);
 		break;
 	default:
+		dev_dbg(&s->dev, "Invalid conf register request\n");
 		return -EINVAL;
 		break;
 	}
@@ -196,68 +185,21 @@
 EXPORT_SYMBOL(pcmcia_access_configuration_register);
 
 
-/** pcmcia_get_window
- */
-int pcmcia_get_window(struct pcmcia_socket *s, window_handle_t *handle,
-		      int idx, win_req_t *req)
+int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
+			memreq_t *req)
 {
-	window_t *win;
-	int w;
+	struct pcmcia_socket *s = p_dev->socket;
 
-	if (!s || !(s->state & SOCKET_PRESENT))
-		return -ENODEV;
-	for (w = idx; w < MAX_WIN; w++)
-		if (s->state & SOCKET_WIN_REQ(w))
-			break;
-	if (w == MAX_WIN)
+	wh--;
+	if (wh >= MAX_WIN)
 		return -EINVAL;
-	win = &s->win[w];
-	req->Base = win->ctl.res->start;
-	req->Size = win->ctl.res->end - win->ctl.res->start + 1;
-	req->AccessSpeed = win->ctl.speed;
-	req->Attributes = 0;
-	if (win->ctl.flags & MAP_ATTRIB)
-		req->Attributes |= WIN_MEMORY_TYPE_AM;
-	if (win->ctl.flags & MAP_ACTIVE)
-		req->Attributes |= WIN_ENABLE;
-	if (win->ctl.flags & MAP_16BIT)
-		req->Attributes |= WIN_DATA_WIDTH_16;
-	if (win->ctl.flags & MAP_USE_WAIT)
-		req->Attributes |= WIN_USE_WAIT;
-	*handle = win;
-	return 0;
-} /* pcmcia_get_window */
-EXPORT_SYMBOL(pcmcia_get_window);
-
-
-/** pcmcia_get_mem_page
- *
- * Change the card address of an already open memory window.
- */
-int pcmcia_get_mem_page(window_handle_t win, memreq_t *req)
-{
-	if ((win == NULL) || (win->magic != WINDOW_MAGIC))
-		return -EINVAL;
-	req->Page = 0;
-	req->CardOffset = win->ctl.card_start;
-	return 0;
-} /* pcmcia_get_mem_page */
-EXPORT_SYMBOL(pcmcia_get_mem_page);
-
-
-int pcmcia_map_mem_page(window_handle_t win, memreq_t *req)
-{
-	struct pcmcia_socket *s;
-	if ((win == NULL) || (win->magic != WINDOW_MAGIC))
-		return -EINVAL;
-	s = win->sock;
 	if (req->Page != 0) {
-		ds_dbg(s, 0, "failure: requested page is zero\n");
+		dev_dbg(&s->dev, "failure: requested page is zero\n");
 		return -EINVAL;
 	}
-	win->ctl.card_start = req->CardOffset;
-	if (s->ops->set_mem_map(s, &win->ctl) != 0) {
-		ds_dbg(s, 0, "failed to set_mem_map\n");
+	s->win[wh].card_start = req->CardOffset;
+	if (s->ops->set_mem_map(s, &s->win[wh]) != 0) {
+		dev_dbg(&s->dev, "failed to set_mem_map\n");
 		return -EIO;
 	}
 	return 0;
@@ -278,10 +220,14 @@
 	s = p_dev->socket;
 	c = p_dev->function_config;
 
-	if (!(s->state & SOCKET_PRESENT))
+	if (!(s->state & SOCKET_PRESENT)) {
+		dev_dbg(&s->dev, "No card present\n");
 		return -ENODEV;
-	if (!(c->state & CONFIG_LOCKED))
+	}
+	if (!(c->state & CONFIG_LOCKED)) {
+		dev_dbg(&s->dev, "Configuration isnt't locked\n");
 		return -EACCES;
+	}
 
 	if (mod->Attributes & CONF_IRQ_CHANGE_VALID) {
 		if (mod->Attributes & CONF_ENABLE_IRQ) {
@@ -295,7 +241,7 @@
 	}
 
 	if (mod->Attributes & CONF_VCC_CHANGE_VALID) {
-		ds_dbg(s, 0, "changing Vcc is not allowed at this time\n");
+		dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
 		return -EINVAL;
 	}
 
@@ -303,7 +249,7 @@
 	if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
 	    (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
 		if (mod->Vpp1 != mod->Vpp2) {
-			ds_dbg(s, 0, "Vpp1 and Vpp2 must be the same\n");
+			dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
 			return -EINVAL;
 		}
 		s->socket.Vpp = mod->Vpp1;
@@ -314,7 +260,7 @@
 		}
 	} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
 		   (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
-		ds_dbg(s, 0, "changing Vcc is not allowed at this time\n");
+		dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
 		return -EINVAL;
 	}
 
@@ -425,11 +371,11 @@
 	if (c->state & CONFIG_LOCKED)
 		return -EACCES;
 	if (c->irq.Attributes != req->Attributes) {
-		ds_dbg(s, 0, "IRQ attributes must match assigned ones\n");
+		dev_dbg(&s->dev, "IRQ attributes must match assigned ones\n");
 		return -EINVAL;
 	}
 	if (s->irq.AssignedIRQ != req->AssignedIRQ) {
-		ds_dbg(s, 0, "IRQ must match assigned one\n");
+		dev_dbg(&s->dev, "IRQ must match assigned one\n");
 		return -EINVAL;
 	}
 	if (--s->irq.Config == 0) {
@@ -437,8 +383,8 @@
 		s->irq.AssignedIRQ = 0;
 	}
 
-	if (req->Attributes & IRQ_HANDLE_PRESENT) {
-		free_irq(req->AssignedIRQ, req->Instance);
+	if (req->Handler) {
+		free_irq(req->AssignedIRQ, p_dev->priv);
 	}
 
 #ifdef CONFIG_PCMCIA_PROBE
@@ -449,30 +395,34 @@
 } /* pcmcia_release_irq */
 
 
-int pcmcia_release_window(window_handle_t win)
+int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh)
 {
-	struct pcmcia_socket *s;
+	struct pcmcia_socket *s = p_dev->socket;
+	pccard_mem_map *win;
 
-	if ((win == NULL) || (win->magic != WINDOW_MAGIC))
+	wh--;
+	if (wh >= MAX_WIN)
 		return -EINVAL;
-	s = win->sock;
-	if (!(win->handle->_win & CLIENT_WIN_REQ(win->index)))
+
+	win = &s->win[wh];
+
+	if (!(p_dev->_win & CLIENT_WIN_REQ(wh))) {
+		dev_dbg(&s->dev, "not releasing unknown window\n");
 		return -EINVAL;
+	}
 
 	/* Shut down memory window */
-	win->ctl.flags &= ~MAP_ACTIVE;
-	s->ops->set_mem_map(s, &win->ctl);
-	s->state &= ~SOCKET_WIN_REQ(win->index);
+	win->flags &= ~MAP_ACTIVE;
+	s->ops->set_mem_map(s, win);
+	s->state &= ~SOCKET_WIN_REQ(wh);
 
 	/* Release system memory */
-	if (win->ctl.res) {
-		release_resource(win->ctl.res);
-		kfree(win->ctl.res);
-		win->ctl.res = NULL;
+	if (win->res) {
+		release_resource(win->res);
+		kfree(win->res);
+		win->res = NULL;
 	}
-	win->handle->_win &= ~CLIENT_WIN_REQ(win->index);
-
-	win->magic = 0;
+	p_dev->_win &= ~CLIENT_WIN_REQ(wh);
 
 	return 0;
 } /* pcmcia_release_window */
@@ -492,12 +442,14 @@
 		return -ENODEV;
 
 	if (req->IntType & INT_CARDBUS) {
-		ds_dbg(p_dev->socket, 0, "IntType may not be INT_CARDBUS\n");
+		dev_dbg(&s->dev, "IntType may not be INT_CARDBUS\n");
 		return -EINVAL;
 	}
 	c = p_dev->function_config;
-	if (c->state & CONFIG_LOCKED)
+	if (c->state & CONFIG_LOCKED) {
+		dev_dbg(&s->dev, "Configuration is locked\n");
 		return -EACCES;
+	}
 
 	/* Do power control.  We don't allow changes in Vcc. */
 	s->socket.Vpp = req->Vpp;
@@ -609,40 +561,44 @@
 	struct pcmcia_socket *s = p_dev->socket;
 	config_t *c;
 
-	if (!(s->state & SOCKET_PRESENT))
+	if (!(s->state & SOCKET_PRESENT)) {
+		dev_dbg(&s->dev, "No card present\n");
 		return -ENODEV;
+	}
 
 	if (!req)
 		return -EINVAL;
 	c = p_dev->function_config;
-	if (c->state & CONFIG_LOCKED)
+	if (c->state & CONFIG_LOCKED) {
+		dev_dbg(&s->dev, "Configuration is locked\n");
 		return -EACCES;
+	}
 	if (c->state & CONFIG_IO_REQ) {
-		ds_dbg(s, 0, "IO already configured\n");
+		dev_dbg(&s->dev, "IO already configured\n");
 		return -EBUSY;
 	}
 	if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) {
-		ds_dbg(s, 0, "bad attribute setting for IO region 1\n");
+		dev_dbg(&s->dev, "bad attribute setting for IO region 1\n");
 		return -EINVAL;
 	}
 	if ((req->NumPorts2 > 0) &&
 	    (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) {
-		ds_dbg(s, 0, "bad attribute setting for IO region 2\n");
+		dev_dbg(&s->dev, "bad attribute setting for IO region 2\n");
 		return -EINVAL;
 	}
 
-	ds_dbg(s, 1, "trying to allocate resource 1\n");
+	dev_dbg(&s->dev, "trying to allocate resource 1\n");
 	if (alloc_io_space(s, req->Attributes1, &req->BasePort1,
 			   req->NumPorts1, req->IOAddrLines)) {
-		ds_dbg(s, 0, "allocation of resource 1 failed\n");
+		dev_dbg(&s->dev, "allocation of resource 1 failed\n");
 		return -EBUSY;
 	}
 
 	if (req->NumPorts2) {
-		ds_dbg(s, 1, "trying to allocate resource 2\n");
+		dev_dbg(&s->dev, "trying to allocate resource 2\n");
 		if (alloc_io_space(s, req->Attributes2, &req->BasePort2,
 				   req->NumPorts2, req->IOAddrLines)) {
-			ds_dbg(s, 0, "allocation of resource 2 failed\n");
+			dev_dbg(&s->dev, "allocation of resource 2 failed\n");
 			release_io_space(s, req->BasePort1, req->NumPorts1);
 			return -EBUSY;
 		}
@@ -680,13 +636,17 @@
 	int ret = -EINVAL, irq = 0;
 	int type;
 
-	if (!(s->state & SOCKET_PRESENT))
+	if (!(s->state & SOCKET_PRESENT)) {
+		dev_dbg(&s->dev, "No card present\n");
 		return -ENODEV;
+	}
 	c = p_dev->function_config;
-	if (c->state & CONFIG_LOCKED)
+	if (c->state & CONFIG_LOCKED) {
+		dev_dbg(&s->dev, "Configuration is locked\n");
 		return -EACCES;
+	}
 	if (c->state & CONFIG_IRQ_REQ) {
-		ds_dbg(s, 0, "IRQ already configured\n");
+		dev_dbg(&s->dev, "IRQ already configured\n");
 		return -EBUSY;
 	}
 
@@ -704,7 +664,7 @@
 	/* if the underlying IRQ infrastructure allows for it, only allocate
 	 * the IRQ, but do not enable it
 	 */
-	if (!(req->Attributes & IRQ_HANDLE_PRESENT))
+	if (!(req->Handler))
 		type |= IRQ_NOAUTOEN;
 #endif /* IRQ_NOAUTOEN */
 
@@ -714,7 +674,7 @@
 	} else {
 		int try;
 		u32 mask = s->irq_mask;
-		void *data = &p_dev->dev.driver; /* something unique to this device */
+		void *data = p_dev; /* something unique to this device */
 
 		for (try = 0; try < 64; try++) {
 			irq = try % 32;
@@ -731,12 +691,12 @@
 			 * registering a dummy handle works, i.e. if the IRQ isn't
 			 * marked as used by the kernel resource management core */
 			ret = request_irq(irq,
-					  (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Handler : test_action,
+					  (req->Handler) ? req->Handler : test_action,
 					  type,
 					  p_dev->devname,
-					  (req->Attributes & IRQ_HANDLE_PRESENT) ? req->Instance : data);
+					  (req->Handler) ? p_dev->priv : data);
 			if (!ret) {
-				if (!(req->Attributes & IRQ_HANDLE_PRESENT))
+				if (!req->Handler)
 					free_irq(irq, data);
 				break;
 			}
@@ -745,17 +705,22 @@
 #endif
 	/* only assign PCI irq if no IRQ already assigned */
 	if (ret && !s->irq.AssignedIRQ) {
-		if (!s->pci_irq)
+		if (!s->pci_irq) {
+			dev_printk(KERN_INFO, &s->dev, "no IRQ found\n");
 			return ret;
+		}
 		type = IRQF_SHARED;
 		irq = s->pci_irq;
 	}
 
-	if (ret && (req->Attributes & IRQ_HANDLE_PRESENT)) {
+	if (ret && req->Handler) {
 		ret = request_irq(irq, req->Handler, type,
-				  p_dev->devname, req->Instance);
-		if (ret)
+				  p_dev->devname, p_dev->priv);
+		if (ret) {
+			dev_printk(KERN_INFO, &s->dev,
+				"request_irq() failed\n");
 			return ret;
+		}
 	}
 
 	/* Make sure the fact the request type was overridden is passed back */
@@ -787,17 +752,19 @@
  * Request_window() establishes a mapping between card memory space
  * and system memory space.
  */
-int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req, window_handle_t *wh)
+int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh)
 {
-	struct pcmcia_socket *s = (*p_dev)->socket;
-	window_t *win;
+	struct pcmcia_socket *s = p_dev->socket;
+	pccard_mem_map *win;
 	u_long align;
 	int w;
 
-	if (!(s->state & SOCKET_PRESENT))
+	if (!(s->state & SOCKET_PRESENT)) {
+		dev_dbg(&s->dev, "No card present\n");
 		return -ENODEV;
+	}
 	if (req->Attributes & (WIN_PAGED | WIN_SHARED)) {
-		ds_dbg(s, 0, "bad attribute setting for iomem region\n");
+		dev_dbg(&s->dev, "bad attribute setting for iomem region\n");
 		return -EINVAL;
 	}
 
@@ -808,12 +775,12 @@
 		  (req->Attributes & WIN_STRICT_ALIGN)) ?
 		 req->Size : s->map_size);
 	if (req->Size & (s->map_size-1)) {
-		ds_dbg(s, 0, "invalid map size\n");
+		dev_dbg(&s->dev, "invalid map size\n");
 		return -EINVAL;
 	}
 	if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
 	    (req->Base & (align-1))) {
-		ds_dbg(s, 0, "invalid base address\n");
+		dev_dbg(&s->dev, "invalid base address\n");
 		return -EINVAL;
 	}
 	if (req->Base)
@@ -823,52 +790,48 @@
 	for (w = 0; w < MAX_WIN; w++)
 		if (!(s->state & SOCKET_WIN_REQ(w))) break;
 	if (w == MAX_WIN) {
-		ds_dbg(s, 0, "all windows are used already\n");
+		dev_dbg(&s->dev, "all windows are used already\n");
 		return -EINVAL;
 	}
 
 	win = &s->win[w];
-	win->magic = WINDOW_MAGIC;
-	win->index = w;
-	win->handle = *p_dev;
-	win->sock = s;
 
 	if (!(s->features & SS_CAP_STATIC_MAP)) {
-		win->ctl.res = pcmcia_find_mem_region(req->Base, req->Size, align,
+		win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
 						      (req->Attributes & WIN_MAP_BELOW_1MB), s);
-		if (!win->ctl.res) {
-			ds_dbg(s, 0, "allocating mem region failed\n");
+		if (!win->res) {
+			dev_dbg(&s->dev, "allocating mem region failed\n");
 			return -EINVAL;
 		}
 	}
-	(*p_dev)->_win |= CLIENT_WIN_REQ(w);
+	p_dev->_win |= CLIENT_WIN_REQ(w);
 
 	/* Configure the socket controller */
-	win->ctl.map = w+1;
-	win->ctl.flags = 0;
-	win->ctl.speed = req->AccessSpeed;
+	win->map = w+1;
+	win->flags = 0;
+	win->speed = req->AccessSpeed;
 	if (req->Attributes & WIN_MEMORY_TYPE)
-		win->ctl.flags |= MAP_ATTRIB;
+		win->flags |= MAP_ATTRIB;
 	if (req->Attributes & WIN_ENABLE)
-		win->ctl.flags |= MAP_ACTIVE;
+		win->flags |= MAP_ACTIVE;
 	if (req->Attributes & WIN_DATA_WIDTH_16)
-		win->ctl.flags |= MAP_16BIT;
+		win->flags |= MAP_16BIT;
 	if (req->Attributes & WIN_USE_WAIT)
-		win->ctl.flags |= MAP_USE_WAIT;
-	win->ctl.card_start = 0;
-	if (s->ops->set_mem_map(s, &win->ctl) != 0) {
-		ds_dbg(s, 0, "failed to set memory mapping\n");
+		win->flags |= MAP_USE_WAIT;
+	win->card_start = 0;
+	if (s->ops->set_mem_map(s, win) != 0) {
+		dev_dbg(&s->dev, "failed to set memory mapping\n");
 		return -EIO;
 	}
 	s->state |= SOCKET_WIN_REQ(w);
 
 	/* Return window handle */
 	if (s->features & SS_CAP_STATIC_MAP) {
-		req->Base = win->ctl.static_start;
+		req->Base = win->static_start;
 	} else {
-		req->Base = win->ctl.res->start;
+		req->Base = win->res->start;
 	}
-	*wh = win;
+	*wh = w + 1;
 
 	return 0;
 } /* pcmcia_request_window */
@@ -879,19 +842,46 @@
 	pcmcia_release_io(p_dev, &p_dev->io);
 	pcmcia_release_irq(p_dev, &p_dev->irq);
 	if (p_dev->win)
-		pcmcia_release_window(p_dev->win);
+		pcmcia_release_window(p_dev, p_dev->win);
 }
 EXPORT_SYMBOL(pcmcia_disable_device);
 
 
 struct pcmcia_cfg_mem {
-	tuple_t tuple;
+	struct pcmcia_device *p_dev;
+	void *priv_data;
+	int (*conf_check) (struct pcmcia_device *p_dev,
+			   cistpl_cftable_entry_t *cfg,
+			   cistpl_cftable_entry_t *dflt,
+			   unsigned int vcc,
+			   void *priv_data);
 	cisparse_t parse;
-	u8 buf[256];
 	cistpl_cftable_entry_t dflt;
 };
 
 /**
+ * pcmcia_do_loop_config() - internal helper for pcmcia_loop_config()
+ *
+ * pcmcia_do_loop_config() is the internal callback for the call from
+ * pcmcia_loop_config() to pccard_loop_tuple(). Data is transferred
+ * by a struct pcmcia_cfg_mem.
+ */
+static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv)
+{
+	cistpl_cftable_entry_t *cfg = &parse->cftable_entry;
+	struct pcmcia_cfg_mem *cfg_mem = priv;
+
+	/* default values */
+	cfg_mem->p_dev->conf.ConfigIndex = cfg->index;
+	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+		cfg_mem->dflt = *cfg;
+
+	return cfg_mem->conf_check(cfg_mem->p_dev, cfg, &cfg_mem->dflt,
+				   cfg_mem->p_dev->socket->socket.Vcc,
+				   cfg_mem->priv_data);
+}
+
+/**
  * pcmcia_loop_config() - loop over configuration options
  * @p_dev:	the struct pcmcia_device which we need to loop for.
  * @conf_check:	function to call for each configuration option.
@@ -913,48 +903,174 @@
 		       void *priv_data)
 {
 	struct pcmcia_cfg_mem *cfg_mem;
-
-	tuple_t *tuple;
 	int ret;
-	unsigned int vcc;
 
 	cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL);
 	if (cfg_mem == NULL)
 		return -ENOMEM;
 
-	/* get the current Vcc setting */
-	vcc = p_dev->socket->socket.Vcc;
+	cfg_mem->p_dev = p_dev;
+	cfg_mem->conf_check = conf_check;
+	cfg_mem->priv_data = priv_data;
 
-	tuple = &cfg_mem->tuple;
-	tuple->TupleData = cfg_mem->buf;
-	tuple->TupleDataMax = 255;
-	tuple->TupleOffset = 0;
-	tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	tuple->Attributes = 0;
+	ret = pccard_loop_tuple(p_dev->socket, p_dev->func,
+				CISTPL_CFTABLE_ENTRY, &cfg_mem->parse,
+				cfg_mem, pcmcia_do_loop_config);
 
-	ret = pcmcia_get_first_tuple(p_dev, tuple);
-	while (!ret) {
-		cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry;
-
-		if (pcmcia_get_tuple_data(p_dev, tuple))
-			goto next_entry;
-
-		if (pcmcia_parse_tuple(tuple, &cfg_mem->parse))
-			goto next_entry;
-
-		/* default values */
-		p_dev->conf.ConfigIndex = cfg->index;
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			cfg_mem->dflt = *cfg;
-
-		ret = conf_check(p_dev, cfg, &cfg_mem->dflt, vcc, priv_data);
-		if (!ret)
-			break;
-
-next_entry:
-		ret = pcmcia_get_next_tuple(p_dev, tuple);
-	}
-
+	kfree(cfg_mem);
 	return ret;
 }
 EXPORT_SYMBOL(pcmcia_loop_config);
+
+
+struct pcmcia_loop_mem {
+	struct pcmcia_device *p_dev;
+	void *priv_data;
+	int (*loop_tuple) (struct pcmcia_device *p_dev,
+			   tuple_t *tuple,
+			   void *priv_data);
+};
+
+/**
+ * pcmcia_do_loop_tuple() - internal helper for pcmcia_loop_config()
+ *
+ * pcmcia_do_loop_tuple() is the internal callback for the call from
+ * pcmcia_loop_tuple() to pccard_loop_tuple(). Data is transferred
+ * by a struct pcmcia_cfg_mem.
+ */
+static int pcmcia_do_loop_tuple(tuple_t *tuple, cisparse_t *parse, void *priv)
+{
+	struct pcmcia_loop_mem *loop = priv;
+
+	return loop->loop_tuple(loop->p_dev, tuple, loop->priv_data);
+};
+
+/**
+ * pcmcia_loop_tuple() - loop over tuples in the CIS
+ * @p_dev:	the struct pcmcia_device which we need to loop for.
+ * @code:	which CIS code shall we look for?
+ * @priv_data:	private data to be passed to the loop_tuple function.
+ * @loop_tuple:	function to call for each CIS entry of type @function. IT
+ *		gets passed the raw tuple and @priv_data.
+ *
+ * pcmcia_loop_tuple() loops over all CIS entries of type @function, and
+ * calls the @loop_tuple function for each entry. If the call to @loop_tuple
+ * returns 0, the loop exits. Returns 0 on success or errorcode otherwise.
+ */
+int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+		      int (*loop_tuple) (struct pcmcia_device *p_dev,
+					 tuple_t *tuple,
+					 void *priv_data),
+		      void *priv_data)
+{
+	struct pcmcia_loop_mem loop = {
+		.p_dev = p_dev,
+		.loop_tuple = loop_tuple,
+		.priv_data = priv_data};
+
+	return pccard_loop_tuple(p_dev->socket, p_dev->func, code, NULL,
+				 &loop, pcmcia_do_loop_tuple);
+};
+EXPORT_SYMBOL(pcmcia_loop_tuple);
+
+
+struct pcmcia_loop_get {
+	size_t len;
+	cisdata_t **buf;
+};
+
+/**
+ * pcmcia_do_get_tuple() - internal helper for pcmcia_get_tuple()
+ *
+ * pcmcia_do_get_tuple() is the internal callback for the call from
+ * pcmcia_get_tuple() to pcmcia_loop_tuple(). As we're only interested in
+ * the first tuple, return 0 unconditionally. Create a memory buffer large
+ * enough to hold the content of the tuple, and fill it with the tuple data.
+ * The caller is responsible to free the buffer.
+ */
+static int pcmcia_do_get_tuple(struct pcmcia_device *p_dev, tuple_t *tuple,
+			       void *priv)
+{
+	struct pcmcia_loop_get *get = priv;
+
+	*get->buf = kzalloc(tuple->TupleDataLen, GFP_KERNEL);
+	if (*get->buf) {
+		get->len = tuple->TupleDataLen;
+		memcpy(*get->buf, tuple->TupleData, tuple->TupleDataLen);
+	} else
+		dev_dbg(&p_dev->dev, "do_get_tuple: out of memory\n");
+	return 0;
+};
+
+/**
+ * pcmcia_get_tuple() - get first tuple from CIS
+ * @p_dev:	the struct pcmcia_device which we need to loop for.
+ * @code:	which CIS code shall we look for?
+ * @buf:        pointer to store the buffer to.
+ *
+ * pcmcia_get_tuple() gets the content of the first CIS entry of type @code.
+ * It returns the buffer length (or zero). The caller is responsible to free
+ * the buffer passed in @buf.
+ */
+size_t pcmcia_get_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+			unsigned char **buf)
+{
+	struct pcmcia_loop_get get = {
+		.len = 0,
+		.buf = buf,
+	};
+
+	*get.buf = NULL;
+	pcmcia_loop_tuple(p_dev, code, pcmcia_do_get_tuple, &get);
+
+	return get.len;
+};
+EXPORT_SYMBOL(pcmcia_get_tuple);
+
+
+/**
+ * pcmcia_do_get_mac() - internal helper for pcmcia_get_mac_from_cis()
+ *
+ * pcmcia_do_get_mac() is the internal callback for the call from
+ * pcmcia_get_mac_from_cis() to pcmcia_loop_tuple(). We check whether the
+ * tuple contains a proper LAN_NODE_ID of length 6, and copy the data
+ * to struct net_device->dev_addr[i].
+ */
+static int pcmcia_do_get_mac(struct pcmcia_device *p_dev, tuple_t *tuple,
+			     void *priv)
+{
+	struct net_device *dev = priv;
+	int i;
+
+	if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
+		return -EINVAL;
+	if (tuple->TupleDataLen < ETH_ALEN + 2) {
+		dev_warn(&p_dev->dev, "Invalid CIS tuple length for "
+			"LAN_NODE_ID\n");
+		return -EINVAL;
+	}
+
+	if (tuple->TupleData[1] != ETH_ALEN) {
+		dev_warn(&p_dev->dev, "Invalid header for LAN_NODE_ID\n");
+		return -EINVAL;
+	}
+	for (i = 0; i < 6; i++)
+		dev->dev_addr[i] = tuple->TupleData[i+2];
+	return 0;
+};
+
+/**
+ * pcmcia_get_mac_from_cis() - read out MAC address from CISTPL_FUNCE
+ * @p_dev:	the struct pcmcia_device for which we want the address.
+ * @dev:	a properly prepared struct net_device to store the info to.
+ *
+ * pcmcia_get_mac_from_cis() reads out the hardware MAC address from
+ * CISTPL_FUNCE and stores it into struct net_device *dev->dev_addr which
+ * must be set up properly by the driver (see examples!).
+ */
+int pcmcia_get_mac_from_cis(struct pcmcia_device *p_dev, struct net_device *dev)
+{
+	return pcmcia_loop_tuple(p_dev, CISTPL_FUNCE, pcmcia_do_get_mac, dev);
+};
+EXPORT_SYMBOL(pcmcia_get_mac_from_cis);
+
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 70a3346..e1741cd 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -213,7 +213,8 @@
 
 			if (csc & I365_CSC_DETECT) {
 				events |= SS_DETECT;
-				dprintk("Card detected in socket %i!\n", i);
+				dev_vdbg(&socket[i].socket.dev,
+					"Card detected in socket %i!\n", i);
 			}
 
 			if (indirect_read(&socket[i], I365_INTCTL)
@@ -331,11 +332,11 @@
 	reg = I365_PWR_NORESET; /* default: disable resetdrv on resume */
 
 	if (state->flags & SS_PWR_AUTO) {
-		dprintk("Auto power\n");
+		dev_dbg(&sock->dev, "Auto power\n");
 		reg |= I365_PWR_AUTO;	/* automatic power mngmnt */
 	}
 	if (state->flags & SS_OUTPUT_ENA) {
-		dprintk("Power Enabled\n");
+		dev_dbg(&sock->dev, "Power Enabled\n");
 		reg |= I365_PWR_OUT;	/* enable power */
 	}
 
@@ -343,40 +344,44 @@
 	case 0:
 		break;
 	case 33:
-		dprintk("setting voltage to Vcc to 3.3V on socket %i\n",
+		dev_dbg(&sock->dev,
+			"setting voltage to Vcc to 3.3V on socket %i\n",
 			socket->number);
 		reg |= I365_VCC_5V;
 		indirect_setbit(socket, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
 		break;
 	case 50:
-		dprintk("setting voltage to Vcc to 5V on socket %i\n",
+		dev_dbg(&sock->dev,
+			"setting voltage to Vcc to 5V on socket %i\n",
 			socket->number);
 		reg |= I365_VCC_5V;
 		indirect_resetbit(socket, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
 		break;
 	default:
-		dprintk("pd6729: pd6729_set_socket called with "
-				"invalid VCC power value: %i\n",
-			state->Vcc);
+		dev_dbg(&sock->dev,
+			"pd6729_set_socket called with invalid VCC power "
+			"value: %i\n", state->Vcc);
 		return -EINVAL;
 	}
 
 	switch (state->Vpp) {
 	case 0:
-		dprintk("not setting Vpp on socket %i\n", socket->number);
+		dev_dbg(&sock->dev, "not setting Vpp on socket %i\n",
+			socket->number);
 		break;
 	case 33:
 	case 50:
-		dprintk("setting Vpp to Vcc for socket %i\n", socket->number);
+		dev_dbg(&sock->dev, "setting Vpp to Vcc for socket %i\n",
+			socket->number);
 		reg |= I365_VPP1_5V;
 		break;
 	case 120:
-		dprintk("setting Vpp to 12.0\n");
+		dev_dbg(&sock->dev, "setting Vpp to 12.0\n");
 		reg |= I365_VPP1_12V;
 		break;
 	default:
-		dprintk("pd6729: pd6729_set_socket called with invalid VPP power value: %i\n",
-			state->Vpp);
+		dev_dbg(&sock->dev, "pd6729: pd6729_set_socket called with "
+			"invalid VPP power value: %i\n", state->Vpp);
 		return -EINVAL;
 	}
 
@@ -438,7 +443,7 @@
 
 	/* Check error conditions */
 	if (map > 1) {
-		dprintk("pd6729_set_io_map with invalid map");
+		dev_dbg(&sock->dev, "pd6729_set_io_map with invalid map\n");
 		return -EINVAL;
 	}
 
@@ -446,7 +451,7 @@
 	if (indirect_read(socket, I365_ADDRWIN) & I365_ENA_IO(map))
 		indirect_resetbit(socket, I365_ADDRWIN, I365_ENA_IO(map));
 
-	/* dprintk("set_io_map: Setting range to %x - %x\n",
+	/* dev_dbg(&sock->dev, "set_io_map: Setting range to %x - %x\n",
 	   io->start, io->stop);*/
 
 	/* write the new values */
@@ -478,12 +483,12 @@
 
 	map = mem->map;
 	if (map > 4) {
-		printk("pd6729_set_mem_map: invalid map");
+		dev_warn(&sock->dev, "invalid map requested\n");
 		return -EINVAL;
 	}
 
 	if ((mem->res->start > mem->res->end) || (mem->speed > 1000)) {
-		printk("pd6729_set_mem_map: invalid address / speed");
+		dev_warn(&sock->dev, "invalid invalid address / speed\n");
 		return -EINVAL;
 	}
 
@@ -529,12 +534,12 @@
 	if (mem->flags & MAP_WRPROT)
 		i |= I365_MEM_WRPROT;
 	if (mem->flags & MAP_ATTRIB) {
-		/* dprintk("requesting attribute memory for socket %i\n",
-			socket->number);*/
+		/* dev_dbg(&sock->dev, "requesting attribute memory for "
+		   "socket %i\n", socket->number);*/
 		i |= I365_MEM_REG;
 	} else {
-		/* dprintk("requesting normal memory for socket %i\n",
-			socket->number);*/
+		/* dev_dbg(&sock->dev, "requesting normal memory for "
+		   "socket %i\n", socket->number);*/
 	}
 	indirect_write16(socket, base + I365_W_OFF, i);
 
@@ -577,7 +582,7 @@
 
 static irqreturn_t pd6729_test(int irq, void *dev)
 {
-	dprintk("-> hit on irq %d\n", irq);
+	pr_devel("-> hit on irq %d\n", irq);
 	return IRQ_HANDLED;
 }
 
@@ -642,13 +647,13 @@
 		goto err_out_free_mem;
 
 	if (!pci_resource_start(dev, 0)) {
-		printk(KERN_INFO "pd6729: refusing to load the driver "
-				 "as the io_base is 0.\n");
+		dev_warn(&dev->dev, "refusing to load the driver as the "
+			"io_base is NULL.\n");
 		goto err_out_free_mem;
 	}
 
-	printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge "
-		"at 0x%llx on irq %d\n",
+	dev_info(&dev->dev, "Cirrus PD6729 PCI to PCMCIA Bridge at 0x%llx "
+		"on irq %d\n",
 		(unsigned long long)pci_resource_start(dev, 0), dev->irq);
  	/*
 	 * Since we have no memory BARs some firmware may not
@@ -656,14 +661,14 @@
 	 */
 	pci_read_config_byte(dev, PCI_COMMAND, &configbyte);
 	if (!(configbyte & PCI_COMMAND_MEMORY)) {
-		printk(KERN_DEBUG "pd6729: Enabling PCI_COMMAND_MEMORY.\n");
+		dev_dbg(&dev->dev, "pd6729: Enabling PCI_COMMAND_MEMORY.\n");
 		configbyte |= PCI_COMMAND_MEMORY;
 		pci_write_config_byte(dev, PCI_COMMAND, configbyte);
 	}
 
 	ret = pci_request_regions(dev, "pd6729");
 	if (ret) {
-		printk(KERN_INFO "pd6729: pci request region failed.\n");
+		dev_warn(&dev->dev, "pci request region failed.\n");
 		goto err_out_disable;
 	}
 
@@ -672,7 +677,7 @@
 
 	mask = pd6729_isa_scan();
 	if (irq_mode == 0 && mask == 0) {
-		printk(KERN_INFO "pd6729: no ISA interrupt is available.\n");
+		dev_warn(&dev->dev, "no ISA interrupt is available.\n");
 		goto err_out_free_res;
 	}
 
@@ -697,8 +702,8 @@
 		/* Register the interrupt handler */
 		if ((ret = request_irq(dev->irq, pd6729_interrupt, IRQF_SHARED,
 							"pd6729", socket))) {
-			printk(KERN_ERR "pd6729: Failed to register irq %d, "
-							"aborting\n", dev->irq);
+			dev_err(&dev->dev, "Failed to register irq %d\n",
+				dev->irq);
 			goto err_out_free_res;
 		}
 	} else {
@@ -713,8 +718,7 @@
 	for (i = 0; i < MAX_SOCKETS; i++) {
 		ret = pcmcia_register_socket(&socket[i].socket);
 		if (ret) {
-			printk(KERN_INFO "pd6729: pcmcia_register_socket "
-					       "failed.\n");
+			dev_warn(&dev->dev, "pcmcia_register_socket failed.\n");
 			for (j = 0; j < i ; j++)
 				pcmcia_unregister_socket(&socket[j].socket);
 			goto err_out_free_res2;
diff --git a/drivers/pcmcia/pd6729.h b/drivers/pcmcia/pd6729.h
index f392e45..41418d3 100644
--- a/drivers/pcmcia/pd6729.h
+++ b/drivers/pcmcia/pd6729.h
@@ -1,13 +1,6 @@
 #ifndef _INCLUDE_GUARD_PD6729_H_
 #define _INCLUDE_GUARD_PD6729_H_
 
-/* Debuging defines */
-#ifdef NOTRACE
-#define dprintk(fmt, args...) printk(fmt , ## args)
-#else
-#define dprintk(fmt, args...) do {} while (0)
-#endif
-
 /* Flags for I365_GENCTL */
 #define I365_DF_VS1		0x40	/* DF-step Voltage Sense */
 #define I365_DF_VS2		0x80
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index 0e35acb..84dde776 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -228,9 +228,43 @@
 #define SKT_DEV_INFO_SIZE(n) \
 	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
 
+int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
+{
+	skt->res_skt.start = _PCMCIA(skt->nr);
+	skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+	skt->res_skt.name = skt_names[skt->nr];
+	skt->res_skt.flags = IORESOURCE_MEM;
+
+	skt->res_io.start = _PCMCIAIO(skt->nr);
+	skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+	skt->res_io.name = "io";
+	skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
+	skt->res_mem.start = _PCMCIAMem(skt->nr);
+	skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+	skt->res_mem.name = "memory";
+	skt->res_mem.flags = IORESOURCE_MEM;
+
+	skt->res_attr.start = _PCMCIAAttr(skt->nr);
+	skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+	skt->res_attr.name = "attribute";
+	skt->res_attr.flags = IORESOURCE_MEM;
+
+	return soc_pcmcia_add_one(skt);
+}
+
+void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
+{
+	/* Provide our PXA2xx specific timing routines. */
+	ops->set_timing  = pxa2xx_pcmcia_set_timing;
+#ifdef CONFIG_CPU_FREQ
+	ops->frequency_change = pxa2xx_pcmcia_frequency_change;
+#endif
+}
+
 int __pxa2xx_drv_pcmcia_probe(struct device *dev)
 {
-	int i, ret;
+	int i, ret = 0;
 	struct pcmcia_low_level *ops;
 	struct skt_dev_info *sinfo;
 	struct soc_pcmcia_socket *skt;
@@ -240,6 +274,8 @@
 
 	ops = (struct pcmcia_low_level *)dev->platform_data;
 
+	pxa2xx_drv_pcmcia_ops(ops);
+
 	sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
 	if (!sinfo)
 		return -ENOMEM;
@@ -250,40 +286,25 @@
 	for (i = 0; i < ops->nr; i++) {
 		skt = &sinfo->skt[i];
 
-		skt->nr		= ops->first + i;
-		skt->irq	= NO_IRQ;
+		skt->nr = ops->first + i;
+		skt->ops = ops;
+		skt->socket.owner = ops->owner;
+		skt->socket.dev.parent = dev;
+		skt->socket.pci_irq = NO_IRQ;
 
-		skt->res_skt.start	= _PCMCIA(skt->nr);
-		skt->res_skt.end	= _PCMCIA(skt->nr) + PCMCIASp - 1;
-		skt->res_skt.name	= skt_names[skt->nr];
-		skt->res_skt.flags	= IORESOURCE_MEM;
-
-		skt->res_io.start	= _PCMCIAIO(skt->nr);
-		skt->res_io.end		= _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
-		skt->res_io.name	= "io";
-		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
-
-		skt->res_mem.start	= _PCMCIAMem(skt->nr);
-		skt->res_mem.end	= _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
-		skt->res_mem.name	= "memory";
-		skt->res_mem.flags	= IORESOURCE_MEM;
-
-		skt->res_attr.start	= _PCMCIAAttr(skt->nr);
-		skt->res_attr.end	= _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
-		skt->res_attr.name	= "attribute";
-		skt->res_attr.flags	= IORESOURCE_MEM;
+		ret = pxa2xx_drv_pcmcia_add_one(skt);
+		if (ret)
+			break;
 	}
 
-	/* Provide our PXA2xx specific timing routines. */
-	ops->set_timing  = pxa2xx_pcmcia_set_timing;
-#ifdef CONFIG_CPU_FREQ
-	ops->frequency_change = pxa2xx_pcmcia_frequency_change;
-#endif
-
-	ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo);
-
-	if (!ret)
+	if (ret) {
+		while (--i >= 0)
+			soc_pcmcia_remove_one(&sinfo->skt[i]);
+		kfree(sinfo);
+	} else {
 		pxa2xx_configure_sockets(dev);
+		dev_set_drvdata(dev, sinfo);
+	}
 
 	return ret;
 }
@@ -297,7 +318,16 @@
 
 static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
 {
-	return soc_common_drv_pcmcia_remove(&dev->dev);
+	struct skt_dev_info *sinfo = platform_get_drvdata(dev);
+	int i;
+
+	platform_set_drvdata(dev, NULL);
+
+	for (i = 0; i < sinfo->nskt; i++)
+		soc_pcmcia_remove_one(&sinfo->skt[i]);
+
+	kfree(sinfo);
+	return 0;
 }
 
 static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
diff --git a/drivers/pcmcia/pxa2xx_base.h b/drivers/pcmcia/pxa2xx_base.h
index 235d681..cb5efae 100644
--- a/drivers/pcmcia/pxa2xx_base.h
+++ b/drivers/pcmcia/pxa2xx_base.h
@@ -1,3 +1,6 @@
 /* temporary measure */
 extern int __pxa2xx_drv_pcmcia_probe(struct device *);
 
+int pxa2xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
+void pxa2xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
+
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 5143a76..05913d0 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -44,7 +44,7 @@
 		return ret;
 	gpio_direction_output(GPIO_PCMCIA_RESET, 0);
 
-	skt->irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+	skt->socket.pci_irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
 	ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 	if (!ret)
 		gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index a7b943d..5662646 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -38,7 +38,7 @@
 		return ret;
 	gpio_direction_output(GPIO_PCMCIA_RESET, 0);
 
-	skt->irq = PCMCIA_S0_RDYINT;
+	skt->socket.pci_irq = PCMCIA_S0_RDYINT;
 	ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 	if (!ret)
 		gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index d09c0dc..8bfbd4d 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -38,7 +38,7 @@
 
 static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) :
+	skt->socket.pci_irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) :
 				IRQ_GPIO(GPIO_E740_PCMCIA_RDY1);
 
 	return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1);
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 6cbb1b1..b9f8c8f 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -32,6 +32,7 @@
 lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				const socket_state_t *state)
 {
+	struct sa1111_pcmcia_socket *s = to_skt(skt);
 	unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
 	int ret = 0;
 
@@ -149,7 +150,7 @@
 
 	if (ret == 0) {
 		lubbock_set_misc_wr(misc_mask, misc_set);
-		sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
+		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
 	}
 
 #if 1
@@ -175,7 +176,7 @@
 			 * Switch to 5V,  Configure socket with 5V voltage
 			 */
 			lubbock_set_misc_wr(misc_mask, 0);
-			sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, 0);
+			sa1111_set_io(s->dev, pa_dwr_mask, 0);
 
 			/*
 			 * It takes about 100ms to turn off Vcc.
@@ -200,12 +201,8 @@
 
 static struct pcmcia_low_level lubbock_pcmcia_ops = {
 	.owner			= THIS_MODULE,
-	.hw_init		= sa1111_pcmcia_hw_init,
-	.hw_shutdown		= sa1111_pcmcia_hw_shutdown,
-	.socket_state		= sa1111_pcmcia_socket_state,
 	.configure_socket	= lubbock_pcmcia_configure_socket,
 	.socket_init		= sa1111_pcmcia_socket_init,
-	.socket_suspend		= sa1111_pcmcia_socket_suspend,
 	.first			= 0,
 	.nr			= 2,
 };
@@ -228,8 +225,9 @@
 		/* Set CF Socket 1 power to standby mode. */
 		lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
 
-		sadev->dev.platform_data = &lubbock_pcmcia_ops;
-		ret = __pxa2xx_drv_pcmcia_probe(&sadev->dev);
+		pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+		ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
+				pxa2xx_drv_pcmcia_add_one);
 	}
 
 	return ret;
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 1138551b..92016fe 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -44,7 +44,7 @@
 	 * before we enable them as outputs.
 	 */
 
-	skt->irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ;
+	skt->socket.pci_irq = (skt->nr == 0) ? MAINSTONE_S0_IRQ : MAINSTONE_S1_IRQ;
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
 
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index 5ba9b36..6fb6f7f 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -45,7 +45,7 @@
 	if (ret)
 		goto err4;
 
-	skt->irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
+	skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
 	return 0;
 
 err4:
diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c
index e07b5c5..b07b247 100644
--- a/drivers/pcmcia/pxa2xx_palmtx.c
+++ b/drivers/pcmcia/pxa2xx_palmtx.c
@@ -53,7 +53,7 @@
 	if (ret)
 		goto err5;
 
-	skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
+	skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
 	return 0;
 
 err5:
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index bc43f78..0ea3b29 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -66,7 +66,7 @@
 		}
 	}
 
-	skt->irq = SCOOP_DEV[skt->nr].irq;
+	skt->socket.pci_irq = SCOOP_DEV[skt->nr].irq;
 
 	return 0;
 }
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index e0e5cb3..b7e5966 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -53,7 +53,7 @@
 			gpio_free(GPIO_PRDY);
 			return -EINVAL;
 		}
-		skt->irq = IRQ_GPIO(GPIO_PRDY);
+		skt->socket.pci_irq = IRQ_GPIO(GPIO_PRDY);
 		break;
 
 #ifndef CONFIG_MACH_TRIZEPS_CONXS
@@ -63,7 +63,7 @@
 		break;
 	}
 	/* release the reset of this card */
-	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->irq);
+	pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq);
 
 	/* supplementory irqs for the socket */
 	for (i = 0; i < ARRAY_SIZE(irqs); i++) {
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c
index 1787136..27be2e15 100644
--- a/drivers/pcmcia/pxa2xx_viper.c
+++ b/drivers/pcmcia/pxa2xx_viper.c
@@ -40,7 +40,7 @@
 {
 	unsigned long flags;
 
-	skt->irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
+	skt->socket.pci_irq = gpio_to_irq(VIPER_CF_RDY_GPIO);
 
 	if (gpio_request(VIPER_CF_CD_GPIO, "CF detect"))
 		goto err_request_cd;
diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c
index e592e0e..de0e770 100644
--- a/drivers/pcmcia/rsrc_mgr.c
+++ b/drivers/pcmcia/rsrc_mgr.c
@@ -18,6 +18,7 @@
 #include <pcmcia/cs_types.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
 #include "cs_internal.h"
 
 
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index ac8aa09..fd013a1 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -27,7 +27,7 @@
 
 static int assabet_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = ASSABET_IRQ_GPIO_CF_IRQ;
+	skt->socket.pci_irq = ASSABET_IRQ_GPIO_CF_IRQ;
 
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
diff --git a/drivers/pcmcia/sa1100_badge4.c b/drivers/pcmcia/sa1100_badge4.c
index 1ca9737..1ce53f4 100644
--- a/drivers/pcmcia/sa1100_badge4.c
+++ b/drivers/pcmcia/sa1100_badge4.c
@@ -127,13 +127,10 @@
 
 static struct pcmcia_low_level badge4_pcmcia_ops = {
 	.owner			= THIS_MODULE,
-	.hw_init		= sa1111_pcmcia_hw_init,
-	.hw_shutdown		= sa1111_pcmcia_hw_shutdown,
-	.socket_state		= sa1111_pcmcia_socket_state,
 	.configure_socket	= badge4_pcmcia_configure_socket,
-
 	.socket_init		= sa1111_pcmcia_socket_init,
-	.socket_suspend		= sa1111_pcmcia_socket_suspend,
+	.first			= 0,
+	.nr			= 2,
 };
 
 int pcmcia_badge4_init(struct device *dev)
@@ -146,7 +143,9 @@
 		       __func__,
 		       badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
 
-		ret = sa11xx_drv_pcmcia_probe(dev, &badge4_pcmcia_ops, 0, 2);
+		sa11xx_drv_pcmcia_ops(&badge4_pcmcia_ops);
+		ret = sa1111_pcmcia_add(dev, &badge4_pcmcia_ops,
+				sa11xx_drv_pcmcia_add_one);
 	}
 
 	return ret;
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 63e6bc4..9bf088b 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -27,7 +27,7 @@
 
 static int cerf_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = CERF_IRQ_GPIO_CF_IRQ;
+	skt->socket.pci_irq = CERF_IRQ_GPIO_CF_IRQ;
 
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 2d0e997..8db86b9 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -51,7 +51,7 @@
 #ifdef CONFIG_SA1100_CERF
 	pcmcia_cerf_init,
 #endif
-#ifdef CONFIG_SA1100_H3600
+#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
 	pcmcia_h3600_init,
 #endif
 #ifdef CONFIG_SA1100_SHANNON
@@ -83,7 +83,16 @@
 
 static int sa11x0_drv_pcmcia_remove(struct platform_device *dev)
 {
-	return soc_common_drv_pcmcia_remove(&dev->dev);
+	struct skt_dev_info *sinfo = platform_get_drvdata(dev);
+	int i;
+
+	platform_set_drvdata(dev, NULL);
+
+	for (i = 0; i < sinfo->nskt; i++)
+		soc_pcmcia_remove_one(&sinfo->skt[i]);
+
+	kfree(sinfo);
+	return 0;
 }
 
 static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 0cc3748..56329ad 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -10,47 +10,139 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <mach/h3600.h>
+#include <mach/h3xxx.h>
 
 #include "sa1100_generic.h"
 
 static struct pcmcia_irqs irqs[] = {
-	{ 0, IRQ_GPIO_H3600_PCMCIA_CD0, "PCMCIA CD0" },
-	{ 1, IRQ_GPIO_H3600_PCMCIA_CD1, "PCMCIA CD1" }
+	{ .sock = 0, .str = "PCMCIA CD0" }, /* .irq will be filled later */
+	{ .sock = 1, .str = "PCMCIA CD1" }
 };
 
 static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	skt->irq = skt->nr ? IRQ_GPIO_H3600_PCMCIA_IRQ1
-			   : IRQ_GPIO_H3600_PCMCIA_IRQ0;
+	int err;
 
+	switch (skt->nr) {
+	case 0:
+		err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ0, "PCMCIA IRQ0");
+		if (err)
+			goto err00;
+		err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ0);
+		if (err)
+			goto err01;
+		skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ0);
 
-	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+		err = gpio_request(H3XXX_GPIO_PCMCIA_CD0, "PCMCIA CD0");
+		if (err)
+			goto err01;
+		err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD0);
+		if (err)
+			goto err02;
+		irqs[0].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD0);
+
+		err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON");
+		if (err)
+			goto err02;
+		err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+		if (err)
+			goto err03;
+		err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON");
+		if (err)
+			goto err03;
+		err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0);
+		if (err)
+			goto err04;
+		err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET");
+		if (err)
+			goto err04;
+		err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0);
+		if (err)
+			goto err05;
+		err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET");
+		if (err)
+			goto err05;
+		err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0);
+		if (err)
+			goto err06;
+		err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+		if (err)
+			goto err06;
+		break;
+	case 1:
+		err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ1, "PCMCIA IRQ1");
+		if (err)
+			goto err10;
+		err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ1);
+		if (err)
+			goto err11;
+		skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ1);
+
+		err = gpio_request(H3XXX_GPIO_PCMCIA_CD1, "PCMCIA CD1");
+		if (err)
+			goto err11;
+		err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD1);
+		if (err)
+			goto err12;
+		irqs[1].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD1);
+
+		err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
+		if (err)
+			goto err12;
+		break;
+	}
+	return 0;
+
+err06:	gpio_free(H3XXX_EGPIO_CARD_RESET);
+err05:	gpio_free(H3XXX_EGPIO_OPT_RESET);
+err04:	gpio_free(H3XXX_EGPIO_OPT_ON);
+err03:	gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
+err02:	gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+err01:	gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+err00:	return err;
+
+err12:	gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+err11:	gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+err10:	return err;
 }
 
 static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
   
-	/* Disable CF bus: */
-	assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
-	assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
-	assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+	switch (skt->nr) {
+	case 0:
+		/* Disable CF bus: */
+		gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
+		gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+		gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
+
+		gpio_free(H3XXX_EGPIO_CARD_RESET);
+		gpio_free(H3XXX_EGPIO_OPT_RESET);
+		gpio_free(H3XXX_EGPIO_OPT_ON);
+		gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
+		gpio_free(H3XXX_GPIO_PCMCIA_CD0);
+		gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
+		break;
+	case 1:
+		gpio_free(H3XXX_GPIO_PCMCIA_CD1);
+		gpio_free(H3XXX_GPIO_PCMCIA_IRQ1);
+		break;
+	}
 }
 
 static void
 h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
-	unsigned long levels = GPLR;
-
 	switch (skt->nr) {
 	case 0:
-		state->detect = levels & GPIO_H3600_PCMCIA_CD0 ? 0 : 1;
-		state->ready = levels & GPIO_H3600_PCMCIA_IRQ0 ? 1 : 0;
+		state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD0);
+		state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ0);
 		state->bvd1 = 0;
 		state->bvd2 = 0;
 		state->wrprot = 0; /* Not available on H3600. */
@@ -59,8 +151,8 @@
 		break;
 
 	case 1:
-		state->detect = levels & GPIO_H3600_PCMCIA_CD1 ? 0 : 1;
-		state->ready = levels & GPIO_H3600_PCMCIA_IRQ1 ? 1 : 0;
+		state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD1);
+		state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ1);
 		state->bvd1 = 0;
 		state->bvd2 = 0;
 		state->wrprot = 0; /* Not available on H3600. */
@@ -79,7 +171,7 @@
 		return -1;
 	}
 
-	assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
+	gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
 
 	/* Silently ignore Vpp, output enable, speaker enable. */
 
@@ -89,9 +181,9 @@
 static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 {
 	/* Enable CF bus: */
-	assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1);
-	assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1);
-	assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0);
+	gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1);
+	gpio_set_value(H3XXX_EGPIO_OPT_ON, 1);
+	gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0);
 
 	msleep(10);
 
@@ -109,10 +201,10 @@
 	 * socket 0 then socket 1.
 	 */
 	if (skt->nr == 1) {
-		assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0);
-		assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0);
+		gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
+		gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
 		/* hmm, does this suck power? */
-		assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1);
+		gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
 	}
 }
 
@@ -131,7 +223,7 @@
 {
 	int ret = -ENODEV;
 
-	if (machine_is_h3600())
+	if (machine_is_h3600() || machine_is_h3100())
 		ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
 
 	return ret;
diff --git a/drivers/pcmcia/sa1100_jornada720.c b/drivers/pcmcia/sa1100_jornada720.c
index 7eedb42..6bcabee 100644
--- a/drivers/pcmcia/sa1100_jornada720.c
+++ b/drivers/pcmcia/sa1100_jornada720.c
@@ -22,25 +22,10 @@
 #define SOCKET1_POWER	(GPIO_GPIO1 | GPIO_GPIO3)
 #define SOCKET1_3V	GPIO_GPIO3
 
-static int jornada720_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
-{
-	unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
-	/*
-	* What is all this crap for?
-	*/
-	GRER |= 0x00000002;
-	/* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
-	sa1111_set_io_dir(SA1111_DEV(skt->dev), pin, 0, 0);
-	sa1111_set_io(SA1111_DEV(skt->dev), pin, 0);
-	sa1111_set_sleep_io(SA1111_DEV(skt->dev), pin, 0);
-
-	return sa1111_pcmcia_hw_init(skt);
-}
-
 static int
 jornada720_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
 {
+	struct sa1111_pcmcia_socket *s = to_skt(skt);
 	unsigned int pa_dwr_mask, pa_dwr_set;
 	int ret;
 
@@ -97,7 +82,7 @@
 		unsigned long flags;
 
 		local_irq_save(flags);
-		sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
+		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
 		local_irq_restore(flags);
 	}
 
@@ -106,21 +91,30 @@
 
 static struct pcmcia_low_level jornada720_pcmcia_ops = {
 	.owner			= THIS_MODULE,
-	.hw_init		= jornada720_pcmcia_hw_init,
-	.hw_shutdown		= sa1111_pcmcia_hw_shutdown,
-	.socket_state		= sa1111_pcmcia_socket_state,
 	.configure_socket	= jornada720_pcmcia_configure_socket,
-
 	.socket_init		= sa1111_pcmcia_socket_init,
-	.socket_suspend		= sa1111_pcmcia_socket_suspend,
+	.first			= 0,
+	.nr			= 2,
 };
 
 int __devinit pcmcia_jornada720_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
-	if (machine_is_jornada720())
-		ret = sa11xx_drv_pcmcia_probe(dev, &jornada720_pcmcia_ops, 0, 2);
+	if (machine_is_jornada720()) {
+		unsigned int pin = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
+
+		GRER |= 0x00000002;
+
+		/* Set GPIO_A<3:1> to be outputs for PCMCIA/CF power controller: */
+		sa1111_set_io_dir(dev, pin, 0, 0);
+		sa1111_set_io(dev, pin, 0);
+		sa1111_set_sleep_io(dev, pin, 0);
+
+		sa11xx_drv_pcmcia_ops(&jornada720_pcmcia_ops);
+		ret = sa1111_pcmcia_add(dev, &jornada720_pcmcia_ops,
+				sa11xx_drv_pcmcia_add_one);
+	}
 
 	return ret;
 }
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 0c76d33..c95639b 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -43,6 +43,7 @@
 static int
 neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
 {
+	struct sa1111_pcmcia_socket *s = to_skt(skt);
 	unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
 	int ret;
 
@@ -99,7 +100,7 @@
 		NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set;
 
 		local_irq_restore(flags);
-		sa1111_set_io(SA1111_DEV(skt->dev), pa_dwr_mask, pa_dwr_set);
+		sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
 	}
 
 	return 0;
@@ -115,12 +116,10 @@
 
 static struct pcmcia_low_level neponset_pcmcia_ops = {
 	.owner			= THIS_MODULE,
-	.hw_init		= sa1111_pcmcia_hw_init,
-	.hw_shutdown		= sa1111_pcmcia_hw_shutdown,
-	.socket_state		= sa1111_pcmcia_socket_state,
 	.configure_socket	= neponset_pcmcia_configure_socket,
 	.socket_init		= neponset_pcmcia_socket_init,
-	.socket_suspend 	= sa1111_pcmcia_socket_suspend,
+	.first			= 0,
+	.nr			= 2,
 };
 
 int pcmcia_neponset_init(struct sa1111_dev *sadev)
@@ -135,7 +134,9 @@
 		sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
 		sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
 		sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-		ret = sa11xx_drv_pcmcia_probe(&sadev->dev, &neponset_pcmcia_ops, 0, 2);
+		sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
+		ret = sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
+				sa11xx_drv_pcmcia_add_one);
 	}
 
 	return ret;
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index 46d8c19..c4d5186 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -28,7 +28,7 @@
 	GAFR &= ~(SHANNON_GPIO_EJECT_0 | SHANNON_GPIO_EJECT_1 | 
 		  SHANNON_GPIO_RDY_0 | SHANNON_GPIO_RDY_1);
 
-	skt->irq = skt->nr ? SHANNON_IRQ_GPIO_RDY_1 : SHANNON_IRQ_GPIO_RDY_0;
+	skt->socket.pci_irq = skt->nr ? SHANNON_IRQ_GPIO_RDY_1 : SHANNON_IRQ_GPIO_RDY_0;
 
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 33a08ae..05bd504 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -28,7 +28,7 @@
 
 	clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
 
-	skt->irq = IRQ_GPIO_CF_IRQ;
+	skt->socket.pci_irq = IRQ_GPIO_CF_IRQ;
 
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 4be4e17..de6bc33 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -28,23 +28,20 @@
 	{ 1, IRQ_S1_BVD1_STSCHG, "SA1111 CF BVD1"            },
 };
 
-int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+static int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
-	if (skt->irq == NO_IRQ)
-		skt->irq = skt->nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT;
-
 	return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
 
-void sa1111_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+static void sa1111_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
 {
 	soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
 
 void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(skt->dev);
-	unsigned long status = sa1111_readl(sadev->mapbase + SA1111_PCSR);
+	struct sa1111_pcmcia_socket *s = to_skt(skt);
+	unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR);
 
 	switch (skt->nr) {
 	case 0:
@@ -71,7 +68,7 @@
 
 int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
 {
-	struct sa1111_dev *sadev = SA1111_DEV(skt->dev);
+	struct sa1111_pcmcia_socket *s = to_skt(skt);
 	unsigned int pccr_skt_mask, pccr_set_mask, val;
 	unsigned long flags;
 
@@ -100,10 +97,10 @@
 		pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
 
 	local_irq_save(flags);
-	val = sa1111_readl(sadev->mapbase + SA1111_PCCR);
+	val = sa1111_readl(s->dev->mapbase + SA1111_PCCR);
 	val &= ~pccr_skt_mask;
 	val |= pccr_set_mask & pccr_skt_mask;
-	sa1111_writel(val, sadev->mapbase + SA1111_PCCR);
+	sa1111_writel(val, s->dev->mapbase + SA1111_PCCR);
 	local_irq_restore(flags);
 
 	return 0;
@@ -114,15 +111,51 @@
 	soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
 
-void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+static void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 {
 	soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
 }
 
+int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
+	int (*add)(struct soc_pcmcia_socket *))
+{
+	struct sa1111_pcmcia_socket *s;
+	int i, ret = 0;
+
+	ops->hw_init = sa1111_pcmcia_hw_init;
+	ops->hw_shutdown = sa1111_pcmcia_hw_shutdown;
+	ops->socket_state = sa1111_pcmcia_socket_state;
+	ops->socket_suspend = sa1111_pcmcia_socket_suspend;
+
+	for (i = 0; i < ops->nr; i++) {
+		s = kzalloc(sizeof(*s), GFP_KERNEL);
+		if (!s)
+			return -ENOMEM;
+
+		s->soc.nr = ops->first + i;
+		s->soc.ops = ops;
+		s->soc.socket.owner = ops->owner;
+		s->soc.socket.dev.parent = &dev->dev;
+		s->soc.socket.pci_irq = s->soc.nr ? IRQ_S1_READY_NINT : IRQ_S0_READY_NINT;
+		s->dev = dev;
+
+		ret = add(&s->soc);
+		if (ret == 0) {
+			s->next = dev_get_drvdata(&dev->dev);
+			dev_set_drvdata(&dev->dev, s);
+		} else
+			kfree(s);
+	}
+
+	return ret;
+}
+
 static int pcmcia_probe(struct sa1111_dev *dev)
 {
 	void __iomem *base;
 
+	dev_set_drvdata(&dev->dev, NULL);
+
 	if (!request_mem_region(dev->res.start, 512,
 				SA1111_DRIVER_NAME(dev)))
 		return -EBUSY;
@@ -152,7 +185,15 @@
 
 static int __devexit pcmcia_remove(struct sa1111_dev *dev)
 {
-	soc_common_drv_pcmcia_remove(&dev->dev);
+	struct sa1111_pcmcia_socket *next, *s = dev_get_drvdata(&dev->dev);
+
+	dev_set_drvdata(&dev->dev, NULL);
+
+	for (; next = s->next, s; s = next) {
+		soc_pcmcia_remove_one(&s->soc);
+		kfree(s);
+	}
+
 	release_mem_region(dev->res.start, 512);
 	return 0;
 }
diff --git a/drivers/pcmcia/sa1111_generic.h b/drivers/pcmcia/sa1111_generic.h
index 10ced4a..02dc857 100644
--- a/drivers/pcmcia/sa1111_generic.h
+++ b/drivers/pcmcia/sa1111_generic.h
@@ -1,12 +1,23 @@
 #include "soc_common.h"
 #include "sa11xx_base.h"
 
-extern int sa1111_pcmcia_hw_init(struct soc_pcmcia_socket *);
-extern void sa1111_pcmcia_hw_shutdown(struct soc_pcmcia_socket *);
+struct sa1111_pcmcia_socket {
+	struct soc_pcmcia_socket soc;
+	struct sa1111_dev *dev;
+	struct sa1111_pcmcia_socket *next;
+};
+
+static inline struct sa1111_pcmcia_socket *to_skt(struct soc_pcmcia_socket *s)
+{
+	return container_of(s, struct sa1111_pcmcia_socket, soc);
+}
+
+int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
+	int (*add)(struct soc_pcmcia_socket *));
+
 extern void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *, struct pcmcia_state *);
 extern int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *, const socket_state_t *);
 extern void sa1111_pcmcia_socket_init(struct soc_pcmcia_socket *);
-extern void sa1111_pcmcia_socket_suspend(struct soc_pcmcia_socket *);
 
 extern int pcmcia_badge4_init(struct device *);
 extern int pcmcia_jornada720_init(struct device *);
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c
index e15d59f..fc9a652 100644
--- a/drivers/pcmcia/sa11xx_base.c
+++ b/drivers/pcmcia/sa11xx_base.c
@@ -171,47 +171,34 @@
 #define SKT_DEV_INFO_SIZE(n) \
 	(sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket))
 
-int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
-			    int first, int nr)
+int sa11xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt)
 {
-	struct skt_dev_info *sinfo;
-	struct soc_pcmcia_socket *skt;
-	int i;
+	skt->res_skt.start = _PCMCIA(skt->nr);
+	skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1;
+	skt->res_skt.name = skt_names[skt->nr];
+	skt->res_skt.flags = IORESOURCE_MEM;
 
-	sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
-	if (!sinfo)
-		return -ENOMEM;
+	skt->res_io.start = _PCMCIAIO(skt->nr);
+	skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
+	skt->res_io.name = "io";
+	skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 
-	sinfo->nskt = nr;
+	skt->res_mem.start = _PCMCIAMem(skt->nr);
+	skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
+	skt->res_mem.name = "memory";
+	skt->res_mem.flags = IORESOURCE_MEM;
 
-	/* Initiliaze processor specific parameters */
-	for (i = 0; i < nr; i++) {
-		skt = &sinfo->skt[i];
+	skt->res_attr.start = _PCMCIAAttr(skt->nr);
+	skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
+	skt->res_attr.name = "attribute";
+	skt->res_attr.flags = IORESOURCE_MEM;
 
-		skt->nr		= first + i;
-		skt->irq	= NO_IRQ;
+	return soc_pcmcia_add_one(skt);
+}
+EXPORT_SYMBOL(sa11xx_drv_pcmcia_add_one);
 
-		skt->res_skt.start	= _PCMCIA(skt->nr);
-		skt->res_skt.end	= _PCMCIA(skt->nr) + PCMCIASp - 1;
-		skt->res_skt.name	= skt_names[skt->nr];
-		skt->res_skt.flags	= IORESOURCE_MEM;
-
-		skt->res_io.start	= _PCMCIAIO(skt->nr);
-		skt->res_io.end		= _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1;
-		skt->res_io.name	= "io";
-		skt->res_io.flags	= IORESOURCE_MEM | IORESOURCE_BUSY;
-
-		skt->res_mem.start	= _PCMCIAMem(skt->nr);
-		skt->res_mem.end	= _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1;
-		skt->res_mem.name	= "memory";
-		skt->res_mem.flags	= IORESOURCE_MEM;
-
-		skt->res_attr.start	= _PCMCIAAttr(skt->nr);
-		skt->res_attr.end	= _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1;
-		skt->res_attr.name	= "attribute";
-		skt->res_attr.flags	= IORESOURCE_MEM;
-	}
-
+void sa11xx_drv_pcmcia_ops(struct pcmcia_low_level *ops)
+{
 	/*
 	 * set default MECR calculation if the board specific
 	 * code did not specify one...
@@ -225,8 +212,48 @@
 #ifdef CONFIG_CPU_FREQ
 	ops->frequency_change = sa1100_pcmcia_frequency_change;
 #endif
+}
+EXPORT_SYMBOL(sa11xx_drv_pcmcia_ops);
 
-	return soc_common_drv_pcmcia_probe(dev, ops, sinfo);
+int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
+			    int first, int nr)
+{
+	struct skt_dev_info *sinfo;
+	struct soc_pcmcia_socket *skt;
+	int i, ret = 0;
+
+	sa11xx_drv_pcmcia_ops(ops);
+
+	sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL);
+	if (!sinfo)
+		return -ENOMEM;
+
+	sinfo->nskt = nr;
+
+	/* Initiliaze processor specific parameters */
+	for (i = 0; i < nr; i++) {
+		skt = &sinfo->skt[i];
+
+		skt->nr = first + i;
+		skt->ops = ops;
+		skt->socket.owner = ops->owner;
+		skt->socket.dev.parent = dev;
+		skt->socket.pci_irq = NO_IRQ;
+
+		ret = sa11xx_drv_pcmcia_add_one(skt);
+		if (ret)
+			break;
+	}
+
+	if (ret) {
+		while (--i >= 0)
+			soc_pcmcia_remove_one(&sinfo->skt[i]);
+		kfree(sinfo);
+	} else {
+		dev_set_drvdata(dev, sinfo);
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe);
 
diff --git a/drivers/pcmcia/sa11xx_base.h b/drivers/pcmcia/sa11xx_base.h
index 7bc2082..3d76d72 100644
--- a/drivers/pcmcia/sa11xx_base.h
+++ b/drivers/pcmcia/sa11xx_base.h
@@ -118,6 +118,8 @@
 }
 
 
+int sa11xx_drv_pcmcia_add_one(struct soc_pcmcia_socket *skt);
+void sa11xx_drv_pcmcia_ops(struct pcmcia_low_level *ops);
 extern int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr);
 
 #endif  /* !defined(_PCMCIA_SA1100_H) */
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index ef7e9e5..6f1a86b 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -144,10 +144,10 @@
 		 */
 		if (skt->irq_state != 1 && state->io_irq) {
 			skt->irq_state = 1;
-			set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING);
+			set_irq_type(skt->socket.pci_irq, IRQ_TYPE_EDGE_FALLING);
 		} else if (skt->irq_state == 1 && state->io_irq == 0) {
 			skt->irq_state = 0;
-			set_irq_type(skt->irq, IRQ_TYPE_NONE);
+			set_irq_type(skt->socket.pci_irq, IRQ_TYPE_NONE);
 		}
 
 		skt->cs_state = *state;
@@ -492,7 +492,8 @@
 
 	p+=sprintf(p, "Vcc      : %d\n", skt->cs_state.Vcc);
 	p+=sprintf(p, "Vpp      : %d\n", skt->cs_state.Vpp);
-	p+=sprintf(p, "IRQ      : %d (%d)\n", skt->cs_state.io_irq, skt->irq);
+	p+=sprintf(p, "IRQ      : %d (%d)\n", skt->cs_state.io_irq,
+		skt->socket.pci_irq);
 	if (skt->ops->show_timing)
 		p+=skt->ops->show_timing(skt, p);
 
@@ -574,7 +575,7 @@
 EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
 
 
-LIST_HEAD(soc_pcmcia_sockets);
+static LIST_HEAD(soc_pcmcia_sockets);
 static DEFINE_MUTEX(soc_pcmcia_sockets_lock);
 
 #ifdef CONFIG_CPU_FREQ
@@ -609,177 +610,137 @@
 				"notifier for PCMCIA (%d)\n", ret);
 	return ret;
 }
+fs_initcall(soc_pcmcia_cpufreq_register);
 
 static void soc_pcmcia_cpufreq_unregister(void)
 {
 	cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
 }
+module_exit(soc_pcmcia_cpufreq_unregister);
 
-#else
-static int soc_pcmcia_cpufreq_register(void) { return 0; }
-static void soc_pcmcia_cpufreq_unregister(void) {}
 #endif
 
-int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops,
-				struct skt_dev_info *sinfo)
+void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt)
 {
-	struct soc_pcmcia_socket *skt;
-	int ret, i;
+	mutex_lock(&soc_pcmcia_sockets_lock);
+	del_timer_sync(&skt->poll_timer);
+
+	pcmcia_unregister_socket(&skt->socket);
+
+	flush_scheduled_work();
+
+	skt->ops->hw_shutdown(skt);
+
+	soc_common_pcmcia_config_skt(skt, &dead_socket);
+
+	list_del(&skt->node);
+	mutex_unlock(&soc_pcmcia_sockets_lock);
+
+	iounmap(skt->virt_io);
+	skt->virt_io = NULL;
+	release_resource(&skt->res_attr);
+	release_resource(&skt->res_mem);
+	release_resource(&skt->res_io);
+	release_resource(&skt->res_skt);
+}
+EXPORT_SYMBOL(soc_pcmcia_remove_one);
+
+int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	init_timer(&skt->poll_timer);
+	skt->poll_timer.function = soc_common_pcmcia_poll_event;
+	skt->poll_timer.data = (unsigned long)skt;
+	skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
+
+	ret = request_resource(&iomem_resource, &skt->res_skt);
+	if (ret)
+		goto out_err_1;
+
+	ret = request_resource(&skt->res_skt, &skt->res_io);
+	if (ret)
+		goto out_err_2;
+
+	ret = request_resource(&skt->res_skt, &skt->res_mem);
+	if (ret)
+		goto out_err_3;
+
+	ret = request_resource(&skt->res_skt, &skt->res_attr);
+	if (ret)
+		goto out_err_4;
+
+	skt->virt_io = ioremap(skt->res_io.start, 0x10000);
+	if (skt->virt_io == NULL) {
+		ret = -ENOMEM;
+		goto out_err_5;
+	}
 
 	mutex_lock(&soc_pcmcia_sockets_lock);
 
+	list_add(&skt->node, &soc_pcmcia_sockets);
+
 	/*
-	 * Initialise the per-socket structure.
+	 * We initialize default socket timing here, because
+	 * we are not guaranteed to see a SetIOMap operation at
+	 * runtime.
 	 */
-	for (i = 0; i < sinfo->nskt; i++) {
-		skt = &sinfo->skt[i];
+	skt->ops->set_timing(skt);
 
-		skt->socket.ops = &soc_common_pcmcia_operations;
-		skt->socket.owner = ops->owner;
-		skt->socket.dev.parent = dev;
+	ret = skt->ops->hw_init(skt);
+	if (ret)
+		goto out_err_6;
 
-		init_timer(&skt->poll_timer);
-		skt->poll_timer.function = soc_common_pcmcia_poll_event;
-		skt->poll_timer.data = (unsigned long)skt;
-		skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD;
+	skt->socket.ops = &soc_common_pcmcia_operations;
+	skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
+	skt->socket.resource_ops = &pccard_static_ops;
+	skt->socket.irq_mask = 0;
+	skt->socket.map_size = PAGE_SIZE;
+	skt->socket.io_offset = (unsigned long)skt->virt_io;
 
-		skt->dev	= dev;
-		skt->ops	= ops;
+	skt->status = soc_common_pcmcia_skt_state(skt);
 
-		ret = request_resource(&iomem_resource, &skt->res_skt);
-		if (ret)
-			goto out_err_1;
+	ret = pcmcia_register_socket(&skt->socket);
+	if (ret)
+		goto out_err_7;
 
-		ret = request_resource(&skt->res_skt, &skt->res_io);
-		if (ret)
-			goto out_err_2;
+	add_timer(&skt->poll_timer);
 
-		ret = request_resource(&skt->res_skt, &skt->res_mem);
-		if (ret)
-			goto out_err_3;
+	mutex_unlock(&soc_pcmcia_sockets_lock);
 
-		ret = request_resource(&skt->res_skt, &skt->res_attr);
-		if (ret)
-			goto out_err_4;
+	ret = device_create_file(&skt->socket.dev, &dev_attr_status);
+	if (ret)
+		goto out_err_8;
 
-		skt->virt_io = ioremap(skt->res_io.start, 0x10000);
-		if (skt->virt_io == NULL) {
-			ret = -ENOMEM;
-			goto out_err_5;
-		}
+	return ret;
 
-		if (list_empty(&soc_pcmcia_sockets))
-			soc_pcmcia_cpufreq_register();
-
-		list_add(&skt->node, &soc_pcmcia_sockets);
-
-		/*
-		 * We initialize default socket timing here, because
-		 * we are not guaranteed to see a SetIOMap operation at
-		 * runtime.
-		 */
-		ops->set_timing(skt);
-
-		ret = ops->hw_init(skt);
-		if (ret)
-			goto out_err_6;
-
-		skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD;
-		skt->socket.resource_ops = &pccard_static_ops;
-		skt->socket.irq_mask = 0;
-		skt->socket.map_size = PAGE_SIZE;
-		skt->socket.pci_irq = skt->irq;
-		skt->socket.io_offset = (unsigned long)skt->virt_io;
-
-		skt->status = soc_common_pcmcia_skt_state(skt);
-
-		ret = pcmcia_register_socket(&skt->socket);
-		if (ret)
-			goto out_err_7;
-
-		WARN_ON(skt->socket.sock != i);
-
-		add_timer(&skt->poll_timer);
-
-		ret = device_create_file(&skt->socket.dev, &dev_attr_status);
-		if (ret)
-			goto out_err_8;
-	}
-
-	dev_set_drvdata(dev, sinfo);
-	ret = 0;
-	goto out;
-
-	do {
-		skt = &sinfo->skt[i];
-
-		device_remove_file(&skt->socket.dev, &dev_attr_status);
  out_err_8:
-		del_timer_sync(&skt->poll_timer);
-		pcmcia_unregister_socket(&skt->socket);
+	mutex_lock(&soc_pcmcia_sockets_lock);
+	del_timer_sync(&skt->poll_timer);
+	pcmcia_unregister_socket(&skt->socket);
 
  out_err_7:
-		flush_scheduled_work();
+	flush_scheduled_work();
 
-		ops->hw_shutdown(skt);
+	skt->ops->hw_shutdown(skt);
  out_err_6:
- 		list_del(&skt->node);
-		iounmap(skt->virt_io);
- out_err_5:
-		release_resource(&skt->res_attr);
- out_err_4:
-		release_resource(&skt->res_mem);
- out_err_3:
-		release_resource(&skt->res_io);
- out_err_2:
-		release_resource(&skt->res_skt);
- out_err_1:
-		i--;
-	} while (i > 0);
-
-	kfree(sinfo);
-
- out:
+	list_del(&skt->node);
 	mutex_unlock(&soc_pcmcia_sockets_lock);
+	iounmap(skt->virt_io);
+ out_err_5:
+	release_resource(&skt->res_attr);
+ out_err_4:
+	release_resource(&skt->res_mem);
+ out_err_3:
+	release_resource(&skt->res_io);
+ out_err_2:
+	release_resource(&skt->res_skt);
+ out_err_1:
+
 	return ret;
 }
+EXPORT_SYMBOL(soc_pcmcia_add_one);
 
-int soc_common_drv_pcmcia_remove(struct device *dev)
-{
-	struct skt_dev_info *sinfo = dev_get_drvdata(dev);
-	int i;
-
-	dev_set_drvdata(dev, NULL);
-
-	mutex_lock(&soc_pcmcia_sockets_lock);
-	for (i = 0; i < sinfo->nskt; i++) {
-		struct soc_pcmcia_socket *skt = &sinfo->skt[i];
-
-		del_timer_sync(&skt->poll_timer);
-
-		pcmcia_unregister_socket(&skt->socket);
-
-		flush_scheduled_work();
-
-		skt->ops->hw_shutdown(skt);
-
-		soc_common_pcmcia_config_skt(skt, &dead_socket);
-
-		list_del(&skt->node);
-		iounmap(skt->virt_io);
-		skt->virt_io = NULL;
-		release_resource(&skt->res_attr);
-		release_resource(&skt->res_mem);
-		release_resource(&skt->res_io);
-		release_resource(&skt->res_skt);
-	}
-	if (list_empty(&soc_pcmcia_sockets))
-		soc_pcmcia_cpufreq_unregister();
-
-	mutex_unlock(&soc_pcmcia_sockets_lock);
-
-	kfree(sinfo);
-
-	return 0;
-}
-EXPORT_SYMBOL(soc_common_drv_pcmcia_remove);
+MODULE_AUTHOR("John Dorsey <john+@cs.cmu.edu>");
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: Common SoC support");
+MODULE_LICENSE("Dual MPL/GPL");
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index 290e143..e40824c 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -30,14 +30,12 @@
 	/*
 	 * Info from low level handler
 	 */
-	struct device		*dev;
 	unsigned int		nr;
-	unsigned int		irq;
 
 	/*
 	 * Core PCMCIA state
 	 */
-	struct pcmcia_low_level *ops;
+	const struct pcmcia_low_level *ops;
 
 	unsigned int		status;
 	socket_state_t		cs_state;
@@ -135,10 +133,8 @@
 extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_pcmcia_timing *);
 
 
-extern struct list_head soc_pcmcia_sockets;
-
-extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo);
-extern int soc_common_drv_pcmcia_remove(struct device *dev);
+void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt);
+int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt);
 
 
 #ifdef CONFIG_PCMCIA_DEBUG
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 6918849..12c49ee1 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -55,21 +55,6 @@
 #include <pcmcia/ss.h>
 #include "tcic.h"
 
-#ifdef CONFIG_PCMCIA_DEBUG
-static int pc_debug;
-
-module_param(pc_debug, int, 0644);
-static const char version[] =
-"tcic.c 1.111 2000/02/15 04:13:12 (David Hinds)";
-
-#define debug(lvl, fmt, arg...) do {				\
-	if (pc_debug > (lvl))					\
-		printk(KERN_DEBUG "tcic: " fmt , ## arg);	\
-} while (0)
-#else
-#define debug(lvl, fmt, arg...) do { } while (0)
-#endif
-
 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
 MODULE_DESCRIPTION("Databook TCIC-2 PCMCIA socket driver");
 MODULE_LICENSE("Dual MPL/GPL");
@@ -574,7 +559,7 @@
     } else
 	active = 1;
 
-    debug(2, "tcic_interrupt()\n");
+    pr_debug("tcic_interrupt()\n");
     
     for (i = 0; i < sockets; i++) {
 	psock = socket_table[i].psock;
@@ -611,13 +596,13 @@
     }
     active = 0;
     
-    debug(2, "interrupt done\n");
+    pr_debug("interrupt done\n");
     return IRQ_HANDLED;
 } /* tcic_interrupt */
 
 static void tcic_timer(u_long data)
 {
-    debug(2, "tcic_timer()\n");
+    pr_debug("tcic_timer()\n");
     tcic_timer_pending = 0;
     tcic_interrupt(0, NULL);
 } /* tcic_timer */
@@ -644,7 +629,7 @@
     reg = tcic_getb(TCIC_PWR);
     if (reg & (TCIC_PWR_VCC(psock)|TCIC_PWR_VPP(psock)))
 	*value |= SS_POWERON;
-    debug(1, "GetStatus(%d) = %#2.2x\n", psock, *value);
+    dev_dbg(&sock->dev, "GetStatus(%d) = %#2.2x\n", psock, *value);
     return 0;
 } /* tcic_get_status */
 
@@ -656,7 +641,7 @@
     u_char reg;
     u_short scf1, scf2;
 
-    debug(1, "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
+    dev_dbg(&sock->dev, "SetSocket(%d, flags %#3.3x, Vcc %d, Vpp %d, "
 	  "io_irq %d, csc_mask %#2.2x)\n", psock, state->flags,
 	  state->Vcc, state->Vpp, state->io_irq, state->csc_mask);
     tcic_setw(TCIC_ADDR+2, (psock << TCIC_SS_SHFT) | TCIC_ADR2_INDREG);
@@ -731,7 +716,7 @@
     u_int addr;
     u_short base, len, ioctl;
     
-    debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
+    dev_dbg(&sock->dev, "SetIOMap(%d, %d, %#2.2x, %d ns, "
 	  "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed,
 	  (unsigned long long)io->start, (unsigned long long)io->stop);
     if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
@@ -768,7 +753,7 @@
     u_short addr, ctl;
     u_long base, len, mmap;
 
-    debug(1, "SetMemMap(%d, %d, %#2.2x, %d ns, "
+    dev_dbg(&sock->dev, "SetMemMap(%d, %d, %#2.2x, %d ns, "
 	  "%#llx-%#llx, %#x)\n", psock, mem->map, mem->flags,
 	  mem->speed, (unsigned long long)mem->res->start,
 	  (unsigned long long)mem->res->end, mem->card_start);
diff --git a/drivers/pcmcia/topic.h b/drivers/pcmcia/topic.h
index edccfa5..615a45a 100644
--- a/drivers/pcmcia/topic.h
+++ b/drivers/pcmcia/topic.h
@@ -114,22 +114,17 @@
 		reg_zv |= TOPIC97_ZV_CONTROL_ENABLE;
 		config_writeb(socket, TOPIC97_ZOOM_VIDEO_CONTROL, reg_zv);
 
-		reg = config_readb(socket, TOPIC97_MISC2);
-		reg |= TOPIC97_MISC2_ZV_ENABLE;
-		config_writeb(socket, TOPIC97_MISC2, reg);
-
-		/* not sure this is needed, doc is unclear */
-#if 0
 		reg = config_readb(socket, TOPIC97_AUDIO_VIDEO_SWITCH);
 		reg |= TOPIC97_AVS_AUDIO_CONTROL | TOPIC97_AVS_VIDEO_CONTROL;
 		config_writeb(socket, TOPIC97_AUDIO_VIDEO_SWITCH, reg);
-#endif
-	}
-	else {
+	} else {
 		reg_zv &= ~TOPIC97_ZV_CONTROL_ENABLE;
 		config_writeb(socket, TOPIC97_ZOOM_VIDEO_CONTROL, reg_zv);
-	}
 
+		reg = config_readb(socket, TOPIC97_AUDIO_VIDEO_SWITCH);
+		reg &= ~(TOPIC97_AVS_AUDIO_CONTROL | TOPIC97_AVS_VIDEO_CONTROL);
+		config_writeb(socket, TOPIC97_AUDIO_VIDEO_SWITCH, reg);
+	}
 }
 
 static int topic97_override(struct yenta_socket *socket)
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 0a8f735..ab64522 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -52,7 +52,7 @@
  */
 #undef START_IN_KERNEL_MODE
 
-#define DRV_VER "0.5.17"
+#define DRV_VER "0.5.18"
 
 /*
  * According to the Atom N270 datasheet,
@@ -61,7 +61,7 @@
  * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
  * assume 89°C is critical temperature.
  */
-#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_TEMP_CRIT 89000
 #define ACERHDF_FAN_OFF 0
 #define ACERHDF_FAN_AUTO 1
 
@@ -69,7 +69,7 @@
  * No matter what value the user puts into the fanon variable, turn on the fan
  * at 80 degree Celsius to prevent hardware damage
  */
-#define ACERHDF_MAX_FANON 80
+#define ACERHDF_MAX_FANON 80000
 
 /*
  * Maximum interval between two temperature checks is 15 seconds, as the die
@@ -85,8 +85,8 @@
 #endif
 
 static unsigned int interval = 10;
-static unsigned int fanon = 63;
-static unsigned int fanoff = 58;
+static unsigned int fanon = 63000;
+static unsigned int fanoff = 58000;
 static unsigned int verbose;
 static unsigned int fanstate = ACERHDF_FAN_AUTO;
 static char force_bios[16];
@@ -171,7 +171,7 @@
 	if (ec_read(bios_cfg->tempreg, &read_temp))
 		return -EINVAL;
 
-	*temp = read_temp;
+	*temp = read_temp * 1000;
 
 	return 0;
 }
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index d93108d..a848c7e 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1680,36 +1680,48 @@
 			  | (__bv1) << 8 | (__bv2) }
 
 #define TPV_Q_X(__v, __bid1, __bid2, __bv1, __bv2,	\
-		__eid1, __eid2, __ev1, __ev2)		\
+		__eid, __ev1, __ev2)			\
 	{ .vendor	= (__v),			\
 	  .bios		= TPID(__bid1, __bid2),		\
-	  .ec		= TPID(__eid1, __eid2),		\
+	  .ec		= __eid,			\
 	  .quirks	= (__ev1) << 24 | (__ev2) << 16 \
 			  | (__bv1) << 8 | (__bv2) }
 
 #define TPV_QI0(__id1, __id2, __bv1, __bv2) \
 	TPV_Q(PCI_VENDOR_ID_IBM, __id1, __id2, __bv1, __bv2)
 
+/* Outdated IBM BIOSes often lack the EC id string */
 #define TPV_QI1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \
 	TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, 	\
-		__bv1, __bv2, __id1, __id2, __ev1, __ev2)
+		__bv1, __bv2, TPID(__id1, __id2),	\
+		__ev1, __ev2),				\
+	TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, 	\
+		__bv1, __bv2, TPACPI_MATCH_UNKNOWN,	\
+		__ev1, __ev2)
 
+/* Outdated IBM BIOSes often lack the EC id string */
 #define TPV_QI2(__bid1, __bid2, __bv1, __bv2,		\
 		__eid1, __eid2, __ev1, __ev2) 		\
 	TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, 	\
-		__bv1, __bv2, __eid1, __eid2, __ev1, __ev2)
+		__bv1, __bv2, TPID(__eid1, __eid2),	\
+		__ev1, __ev2),				\
+	TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, 	\
+		__bv1, __bv2, TPACPI_MATCH_UNKNOWN,	\
+		__ev1, __ev2)
 
 #define TPV_QL0(__id1, __id2, __bv1, __bv2) \
 	TPV_Q(PCI_VENDOR_ID_LENOVO, __id1, __id2, __bv1, __bv2)
 
 #define TPV_QL1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \
 	TPV_Q_X(PCI_VENDOR_ID_LENOVO, __id1, __id2, 	\
-		__bv1, __bv2, __id1, __id2, __ev1, __ev2)
+		__bv1, __bv2, TPID(__id1, __id2),	\
+		__ev1, __ev2)
 
 #define TPV_QL2(__bid1, __bid2, __bv1, __bv2,		\
 		__eid1, __eid2, __ev1, __ev2) 		\
 	TPV_Q_X(PCI_VENDOR_ID_LENOVO, __bid1, __bid2, 	\
-		__bv1, __bv2, __eid1, __eid2, __ev1, __ev2)
+		__bv1, __bv2, TPID(__eid1, __eid2),	\
+		__ev1, __ev2)
 
 static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = {
 	/*  Numeric models ------------------ */
@@ -6313,7 +6325,7 @@
 	 * Doing it this way makes the syscall restartable in case of EINTR
 	 */
 	rc = brightness_set(level);
-	return (rc == -EINTR)? ERESTARTSYS : rc;
+	return (rc == -EINTR)? -ERESTARTSYS : rc;
 }
 
 static struct ibm_struct brightness_driver_data = {
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cea6cef..1186749 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -77,6 +77,13 @@
 	  Say Y to enable support for the battery on the Sharp Zaurus
 	  SL-6000 (tosa) models.
 
+config BATTERY_COLLIE
+	tristate "Sharp SL-5500 (collie) battery"
+	depends on SA1100_COLLIE && MCP_UCB1200
+	help
+	  Say Y to enable support for the battery on the Sharp Zaurus
+	  SL-5500 (collie) models.
+
 config BATTERY_WM97XX
 	bool "WM97xx generic battery driver"
 	depends on TOUCHSCREEN_WM97XX=y
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b96f29d..356cdfd 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -24,6 +24,7 @@
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
+obj-$(CONFIG_BATTERY_COLLIE)	+= collie_battery.o
 obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
 obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c
new file mode 100644
index 0000000..039f41a
--- /dev/null
+++ b/drivers/power/collie_battery.c
@@ -0,0 +1,418 @@
+/*
+ * Battery and Power Management code for the Sharp SL-5x00
+ *
+ * Copyright (C) 2009 Thomas Kunze
+ *
+ * based on tosa_battery.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/mfd/ucb1x00.h>
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/mach-types.h>
+#include <mach/collie.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+static struct ucb1x00 *ucb;
+
+struct collie_bat {
+	int status;
+	struct power_supply psy;
+	int full_chrg;
+
+	struct mutex work_lock; /* protects data */
+
+	bool (*is_present)(struct collie_bat *bat);
+	int gpio_full;
+	int gpio_charge_on;
+
+	int technology;
+
+	int gpio_bat;
+	int adc_bat;
+	int adc_bat_divider;
+	int bat_max;
+	int bat_min;
+
+	int gpio_temp;
+	int adc_temp;
+	int adc_temp_divider;
+};
+
+static struct collie_bat collie_bat_main;
+
+static unsigned long collie_read_bat(struct collie_bat *bat)
+{
+	unsigned long value = 0;
+
+	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+		return 0;
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_bat, 1);
+	msleep(5);
+	ucb1x00_adc_enable(ucb);
+	value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
+	ucb1x00_adc_disable(ucb);
+	gpio_set_value(bat->gpio_bat, 0);
+	mutex_unlock(&bat_lock);
+	value = value * 1000000 / bat->adc_bat_divider;
+
+	return value;
+}
+
+static unsigned long collie_read_temp(struct collie_bat *bat)
+{
+	unsigned long value = 0;
+	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+		return 0;
+
+	mutex_lock(&bat_lock);
+	gpio_set_value(bat->gpio_temp, 1);
+	msleep(5);
+	ucb1x00_adc_enable(ucb);
+	value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
+	ucb1x00_adc_disable(ucb);
+	gpio_set_value(bat->gpio_temp, 0);
+	mutex_unlock(&bat_lock);
+
+	value = value * 10000 / bat->adc_temp_divider;
+
+	return value;
+}
+
+static int collie_bat_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	int ret = 0;
+	struct collie_bat *bat = container_of(psy, struct collie_bat, psy);
+
+	if (bat->is_present && !bat->is_present(bat)
+			&& psp != POWER_SUPPLY_PROP_PRESENT) {
+		return -ENODEV;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = bat->status;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = bat->technology;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = collie_read_bat(bat);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		if (bat->full_chrg == -1)
+			val->intval = bat->bat_max;
+		else
+			val->intval = bat->full_chrg;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = bat->bat_max;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = bat->bat_min;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		val->intval = collie_read_temp(bat);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = bat->is_present ? bat->is_present(bat) : 1;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static void collie_bat_external_power_changed(struct power_supply *psy)
+{
+	schedule_work(&bat_work);
+}
+
+static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
+{
+	pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
+	schedule_work(&bat_work);
+	return IRQ_HANDLED;
+}
+
+static void collie_bat_update(struct collie_bat *bat)
+{
+	int old;
+	struct power_supply *psy = &bat->psy;
+
+	mutex_lock(&bat->work_lock);
+
+	old = bat->status;
+
+	if (bat->is_present && !bat->is_present(bat)) {
+		printk(KERN_NOTICE "%s not present\n", psy->name);
+		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+		bat->full_chrg = -1;
+	} else if (power_supply_am_i_supplied(psy)) {
+		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+			gpio_set_value(bat->gpio_charge_on, 1);
+			mdelay(15);
+		}
+
+		if (gpio_get_value(bat->gpio_full)) {
+			if (old == POWER_SUPPLY_STATUS_CHARGING ||
+					bat->full_chrg == -1)
+				bat->full_chrg = collie_read_bat(bat);
+
+			gpio_set_value(bat->gpio_charge_on, 0);
+			bat->status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			gpio_set_value(bat->gpio_charge_on, 1);
+			bat->status = POWER_SUPPLY_STATUS_CHARGING;
+		}
+	} else {
+		gpio_set_value(bat->gpio_charge_on, 0);
+		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+	}
+
+	if (old != bat->status)
+		power_supply_changed(psy);
+
+	mutex_unlock(&bat->work_lock);
+}
+
+static void collie_bat_work(struct work_struct *work)
+{
+	collie_bat_update(&collie_bat_main);
+}
+
+
+static enum power_supply_property collie_bat_main_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static enum power_supply_property collie_bat_bu_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_PRESENT,
+};
+
+static struct collie_bat collie_bat_main = {
+	.status = POWER_SUPPLY_STATUS_DISCHARGING,
+	.full_chrg = -1,
+	.psy = {
+		.name		= "main-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= collie_bat_main_props,
+		.num_properties	= ARRAY_SIZE(collie_bat_main_props),
+		.get_property	= collie_bat_get_property,
+		.external_power_changed = collie_bat_external_power_changed,
+		.use_for_apm	= 1,
+	},
+
+	.gpio_full = COLLIE_GPIO_CO,
+	.gpio_charge_on = COLLIE_GPIO_CHARGE_ON,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+	.gpio_bat = COLLIE_GPIO_MBAT_ON,
+	.adc_bat = UCB_ADC_INP_AD1,
+	.adc_bat_divider = 155,
+	.bat_max = 4310000,
+	.bat_min = 1551 * 1000000 / 414,
+
+	.gpio_temp = COLLIE_GPIO_TMP_ON,
+	.adc_temp = UCB_ADC_INP_AD0,
+	.adc_temp_divider = 10000,
+};
+
+static struct collie_bat collie_bat_bu = {
+	.status = POWER_SUPPLY_STATUS_UNKNOWN,
+	.full_chrg = -1,
+
+	.psy = {
+		.name		= "backup-battery",
+		.type		= POWER_SUPPLY_TYPE_BATTERY,
+		.properties	= collie_bat_bu_props,
+		.num_properties	= ARRAY_SIZE(collie_bat_bu_props),
+		.get_property	= collie_bat_get_property,
+		.external_power_changed = collie_bat_external_power_changed,
+	},
+
+	.gpio_full = -1,
+	.gpio_charge_on = -1,
+
+	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+	.gpio_bat = COLLIE_GPIO_BBAT_ON,
+	.adc_bat = UCB_ADC_INP_AD1,
+	.adc_bat_divider = 155,
+	.bat_max = 3000000,
+	.bat_min = 1900000,
+
+	.gpio_temp = -1,
+	.adc_temp = -1,
+	.adc_temp_divider = -1,
+};
+
+static struct {
+	int gpio;
+	char *name;
+	bool output;
+	int value;
+} gpios[] = {
+	{ COLLIE_GPIO_CO,		"main battery full",	0, 0 },
+	{ COLLIE_GPIO_MAIN_BAT_LOW,	"main battery low",	0, 0 },
+	{ COLLIE_GPIO_CHARGE_ON,	"main charge on",	1, 0 },
+	{ COLLIE_GPIO_MBAT_ON,		"main battery",		1, 0 },
+	{ COLLIE_GPIO_TMP_ON,		"main battery temp",	1, 0 },
+	{ COLLIE_GPIO_BBAT_ON,		"backup battery",	1, 0 },
+};
+
+#ifdef CONFIG_PM
+static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
+{
+	/* flush all pending status updates */
+	flush_scheduled_work();
+	return 0;
+}
+
+static int collie_bat_resume(struct ucb1x00_dev *dev)
+{
+	/* things may have changed while we were away */
+	schedule_work(&bat_work);
+	return 0;
+}
+#else
+#define collie_bat_suspend NULL
+#define collie_bat_resume NULL
+#endif
+
+static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
+{
+	int ret;
+	int i;
+
+	if (!machine_is_collie())
+		return -ENODEV;
+
+	ucb = dev->ucb;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		ret = gpio_request(gpios[i].gpio, gpios[i].name);
+		if (ret) {
+			i--;
+			goto err_gpio;
+		}
+
+		if (gpios[i].output)
+			ret = gpio_direction_output(gpios[i].gpio,
+					gpios[i].value);
+		else
+			ret = gpio_direction_input(gpios[i].gpio);
+
+		if (ret)
+			goto err_gpio;
+	}
+
+	mutex_init(&collie_bat_main.work_lock);
+
+	INIT_WORK(&bat_work, collie_bat_work);
+
+	ret = power_supply_register(&dev->ucb->dev, &collie_bat_main.psy);
+	if (ret)
+		goto err_psy_reg_main;
+	ret = power_supply_register(&dev->ucb->dev, &collie_bat_bu.psy);
+	if (ret)
+		goto err_psy_reg_bu;
+
+	ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO),
+				collie_bat_gpio_isr,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"main full", &collie_bat_main);
+	if (!ret) {
+		schedule_work(&bat_work);
+		return 0;
+	}
+	power_supply_unregister(&collie_bat_bu.psy);
+err_psy_reg_bu:
+	power_supply_unregister(&collie_bat_main.psy);
+err_psy_reg_main:
+
+	/* see comment in collie_bat_remove */
+	flush_scheduled_work();
+
+	i--;
+err_gpio:
+	for (; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+
+	return ret;
+}
+
+static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
+{
+	int i;
+
+	free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
+
+	power_supply_unregister(&collie_bat_bu.psy);
+	power_supply_unregister(&collie_bat_main.psy);
+
+	/*
+	 * now flush all pending work.
+	 * we won't get any more schedules, since all
+	 * sources (isr and external_power_changed)
+	 * are unregistered now.
+	 */
+	flush_scheduled_work();
+
+	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
+		gpio_free(gpios[i].gpio);
+}
+
+static struct ucb1x00_driver collie_bat_driver = {
+	.add		= collie_bat_probe,
+	.remove		= __devexit_p(collie_bat_remove),
+	.suspend	= collie_bat_suspend,
+	.resume		= collie_bat_resume,
+};
+
+static int __init collie_bat_init(void)
+{
+	return ucb1x00_register_driver(&collie_bat_driver);
+}
+
+static void __exit collie_bat_exit(void)
+{
+	ucb1x00_unregister_driver(&collie_bat_driver);
+}
+
+module_init(collie_bat_init);
+module_exit(collie_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Kunze");
+MODULE_DESCRIPTION("Collie battery driver");
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
index 1d8d987..4885700 100644
--- a/drivers/regulator/wm831x-isink.c
+++ b/drivers/regulator/wm831x-isink.c
@@ -167,6 +167,8 @@
 		return -ENOMEM;
 	}
 
+	isink->wm831x = wm831x;
+
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "No I/O resource\n");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 3c20dae..f2e1004 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -509,6 +509,15 @@
 	  This driver can also be built as a module, if so, the module
 	  will be called "rtc-m48t59".
 
+config RTC_DRV_MSM6242
+	tristate "Oki MSM6242"
+	help
+	  If you say yes here you get support for the Oki MSM6242
+	  timekeeping chip. It is used in some Amiga models (e.g. A2000).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-msm6242.
+
 config RTC_MXC
 	tristate "Freescale MXC Real Time Clock"
 	depends on ARCH_MXC
@@ -529,6 +538,16 @@
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-bq4802.
 
+config RTC_DRV_RP5C01
+	tristate "Ricoh RP5C01"
+	help
+	  If you say yes here you get support for the Ricoh RP5C01
+	  timekeeping chip. It is used in some Amiga models (e.g. A3000
+	  and A4000).
+
+	  This driver can also be built as a module. If so, the module
+	  will be called rtc-rp5c01.
+
 config RTC_DRV_V3020
 	tristate "EM Microelectronic V3020"
 	help
@@ -780,7 +799,7 @@
 
 config RTC_DRV_MV
 	tristate "Marvell SoC RTC"
-	depends on ARCH_KIRKWOOD
+	depends on ARCH_KIRKWOOD || ARCH_DOVE
 	help
 	  If you say yes here you will get support for the in-chip RTC
 	  that can be found in some of Marvell's SoC devices, such as
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index aa3fbd5..af1ba7a 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -52,6 +52,7 @@
 obj-$(CONFIG_RTC_MXC)		+= rtc-mxc.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
+obj-$(CONFIG_RTC_DRV_MSM6242)	+= rtc-msm6242.o
 obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_PCAP)	+= rtc-pcap.o
@@ -64,6 +65,7 @@
 obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
 obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
 obj-$(CONFIG_RTC_DRV_R9701)	+= rtc-r9701.o
+obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c01.o
 obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
 obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
 obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
diff --git a/drivers/rtc/rtc-msm6242.c b/drivers/rtc/rtc-msm6242.c
new file mode 100644
index 0000000..5f5968a
--- /dev/null
+++ b/drivers/rtc/rtc-msm6242.c
@@ -0,0 +1,269 @@
+/*
+ *  Oki MSM6242 RTC Driver
+ *
+ *  Copyright 2009 Geert Uytterhoeven
+ *
+ *  Based on the A2000 TOD code in arch/m68k/amiga/config.c
+ *  Copyright (C) 1993 Hamish Macdonald
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+
+enum {
+	MSM6242_SECOND1		= 0x0,	/* 1-second digit register */
+	MSM6242_SECOND10	= 0x1,	/* 10-second digit register */
+	MSM6242_MINUTE1		= 0x2,	/* 1-minute digit register */
+	MSM6242_MINUTE10	= 0x3,	/* 10-minute digit register */
+	MSM6242_HOUR1		= 0x4,	/* 1-hour digit register */
+	MSM6242_HOUR10		= 0x5,	/* PM/AM, 10-hour digit register */
+	MSM6242_DAY1		= 0x6,	/* 1-day digit register */
+	MSM6242_DAY10		= 0x7,	/* 10-day digit register */
+	MSM6242_MONTH1		= 0x8,	/* 1-month digit register */
+	MSM6242_MONTH10		= 0x9,	/* 10-month digit register */
+	MSM6242_YEAR1		= 0xa,	/* 1-year digit register */
+	MSM6242_YEAR10		= 0xb,	/* 10-year digit register */
+	MSM6242_WEEK		= 0xc,	/* Week register */
+	MSM6242_CD		= 0xd,	/* Control Register D */
+	MSM6242_CE		= 0xe,	/* Control Register E */
+	MSM6242_CF		= 0xf,	/* Control Register F */
+};
+
+#define MSM6242_HOUR10_AM	(0 << 2)
+#define MSM6242_HOUR10_PM	(1 << 2)
+#define MSM6242_HOUR10_HR_MASK	(3 << 0)
+
+#define MSM6242_WEEK_SUNDAY	0
+#define MSM6242_WEEK_MONDAY	1
+#define MSM6242_WEEK_TUESDAY	2
+#define MSM6242_WEEK_WEDNESDAY	3
+#define MSM6242_WEEK_THURSDAY	4
+#define MSM6242_WEEK_FRIDAY	5
+#define MSM6242_WEEK_SATURDAY	6
+
+#define MSM6242_CD_30_S_ADJ	(1 << 3)	/* 30-second adjustment */
+#define MSM6242_CD_IRQ_FLAG	(1 << 2)
+#define MSM6242_CD_BUSY		(1 << 1)
+#define MSM6242_CD_HOLD		(1 << 0)
+
+#define MSM6242_CE_T_MASK	(3 << 2)
+#define MSM6242_CE_T_64HZ	(0 << 2)	/* period 1/64 second */
+#define MSM6242_CE_T_1HZ	(1 << 2)	/* period 1 second */
+#define MSM6242_CE_T_1MINUTE	(2 << 2)	/* period 1 minute */
+#define MSM6242_CE_T_1HOUR	(3 << 2)	/* period 1 hour */
+
+#define MSM6242_CE_ITRPT_STND	(1 << 1)
+#define MSM6242_CE_MASK		(1 << 0)	/* STD.P output control */
+
+#define MSM6242_CF_TEST		(1 << 3)
+#define MSM6242_CF_12H		(0 << 2)
+#define MSM6242_CF_24H		(1 << 2)
+#define MSM6242_CF_STOP		(1 << 1)
+#define MSM6242_CF_REST		(1 << 0)	/* reset */
+
+
+struct msm6242_priv {
+	u32 __iomem *regs;
+	struct rtc_device *rtc;
+};
+
+static inline unsigned int msm6242_read(struct msm6242_priv *priv,
+				       unsigned int reg)
+{
+	return __raw_readl(&priv->regs[reg]) & 0xf;
+}
+
+static inline void msm6242_write(struct msm6242_priv *priv, unsigned int val,
+				unsigned int reg)
+{
+	return __raw_writel(val, &priv->regs[reg]);
+}
+
+static inline void msm6242_set(struct msm6242_priv *priv, unsigned int val,
+			       unsigned int reg)
+{
+	msm6242_write(priv, msm6242_read(priv, reg) | val, reg);
+}
+
+static inline void msm6242_clear(struct msm6242_priv *priv, unsigned int val,
+				 unsigned int reg)
+{
+	msm6242_write(priv, msm6242_read(priv, reg) & ~val, reg);
+}
+
+static void msm6242_lock(struct msm6242_priv *priv)
+{
+	int cnt = 5;
+
+	msm6242_set(priv, MSM6242_CD_HOLD, MSM6242_CD);
+
+	while ((msm6242_read(priv, MSM6242_CD) & MSM6242_CD_BUSY) && cnt) {
+		msm6242_clear(priv, MSM6242_CD_HOLD, MSM6242_CD);
+		udelay(70);
+		msm6242_set(priv, MSM6242_CD_HOLD, MSM6242_CD);
+		cnt--;
+	}
+
+	if (!cnt)
+		pr_warning("msm6242: timed out waiting for RTC (0x%x)\n",
+			   msm6242_read(priv, MSM6242_CD));
+}
+
+static void msm6242_unlock(struct msm6242_priv *priv)
+{
+	msm6242_clear(priv, MSM6242_CD_HOLD, MSM6242_CD);
+}
+
+static int msm6242_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct msm6242_priv *priv = dev_get_drvdata(dev);
+
+	msm6242_lock(priv);
+
+	tm->tm_sec  = msm6242_read(priv, MSM6242_SECOND10) * 10 +
+		      msm6242_read(priv, MSM6242_SECOND1);
+	tm->tm_min  = msm6242_read(priv, MSM6242_MINUTE10) * 10 +
+		      msm6242_read(priv, MSM6242_MINUTE1);
+	tm->tm_hour = (msm6242_read(priv, MSM6242_HOUR10 & 3)) * 10 +
+		      msm6242_read(priv, MSM6242_HOUR1);
+	tm->tm_mday = msm6242_read(priv, MSM6242_DAY10) * 10 +
+		      msm6242_read(priv, MSM6242_DAY1);
+	tm->tm_wday = msm6242_read(priv, MSM6242_WEEK);
+	tm->tm_mon  = msm6242_read(priv, MSM6242_MONTH10) * 10 +
+		      msm6242_read(priv, MSM6242_MONTH1) - 1;
+	tm->tm_year = msm6242_read(priv, MSM6242_YEAR10) * 10 +
+		      msm6242_read(priv, MSM6242_YEAR1);
+	if (tm->tm_year <= 69)
+		tm->tm_year += 100;
+
+	if (!(msm6242_read(priv, MSM6242_CF) & MSM6242_CF_24H)) {
+		unsigned int pm = msm6242_read(priv, MSM6242_HOUR10) &
+				  MSM6242_HOUR10_PM;
+		if (!pm && tm->tm_hour == 12)
+			tm->tm_hour = 0;
+		else if (pm && tm->tm_hour != 12)
+			tm->tm_hour += 12;
+	}
+
+	msm6242_unlock(priv);
+
+	return rtc_valid_tm(tm);
+}
+
+static int msm6242_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct msm6242_priv *priv = dev_get_drvdata(dev);
+
+	msm6242_lock(priv);
+
+	msm6242_write(priv, tm->tm_sec / 10, MSM6242_SECOND10);
+	msm6242_write(priv, tm->tm_sec % 10, MSM6242_SECOND1);
+	msm6242_write(priv, tm->tm_min / 10, MSM6242_MINUTE10);
+	msm6242_write(priv, tm->tm_min % 10, MSM6242_MINUTE1);
+	if (msm6242_read(priv, MSM6242_CF) & MSM6242_CF_24H)
+		msm6242_write(priv, tm->tm_hour / 10, MSM6242_HOUR10);
+	else if (tm->tm_hour >= 12)
+		msm6242_write(priv, MSM6242_HOUR10_PM + (tm->tm_hour - 12) / 10,
+			      MSM6242_HOUR10);
+	else
+		msm6242_write(priv, tm->tm_hour / 10, MSM6242_HOUR10);
+	msm6242_write(priv, tm->tm_hour % 10, MSM6242_HOUR1);
+	msm6242_write(priv, tm->tm_mday / 10, MSM6242_DAY10);
+	msm6242_write(priv, tm->tm_mday % 10, MSM6242_DAY1);
+	if (tm->tm_wday != -1)
+		msm6242_write(priv, tm->tm_wday, MSM6242_WEEK);
+	msm6242_write(priv, (tm->tm_mon + 1) / 10, MSM6242_MONTH10);
+	msm6242_write(priv, (tm->tm_mon + 1) % 10, MSM6242_MONTH1);
+	if (tm->tm_year >= 100)
+		tm->tm_year -= 100;
+	msm6242_write(priv, tm->tm_year / 10, MSM6242_YEAR10);
+	msm6242_write(priv, tm->tm_year % 10, MSM6242_YEAR1);
+
+	msm6242_unlock(priv);
+	return 0;
+}
+
+static const struct rtc_class_ops msm6242_rtc_ops = {
+	.read_time	= msm6242_read_time,
+	.set_time	= msm6242_set_time,
+};
+
+static int __init msm6242_rtc_probe(struct platform_device *dev)
+{
+	struct resource *res;
+	struct msm6242_priv *priv;
+	struct rtc_device *rtc;
+	int error;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = ioremap(res->start, resource_size(res));
+	if (!priv->regs) {
+		error = -ENOMEM;
+		goto out_free_priv;
+	}
+
+	rtc = rtc_device_register("rtc-msm6242", &dev->dev, &msm6242_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		error = PTR_ERR(rtc);
+		goto out_unmap;
+	}
+
+	priv->rtc = rtc;
+	platform_set_drvdata(dev, priv);
+	return 0;
+
+out_unmap:
+	iounmap(priv->regs);
+out_free_priv:
+	kfree(priv);
+	return error;
+}
+
+static int __exit msm6242_rtc_remove(struct platform_device *dev)
+{
+	struct msm6242_priv *priv = platform_get_drvdata(dev);
+
+	rtc_device_unregister(priv->rtc);
+	iounmap(priv->regs);
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver msm6242_rtc_driver = {
+	.driver	= {
+		.name	= "rtc-msm6242",
+		.owner	= THIS_MODULE,
+	},
+	.remove	= __exit_p(msm6242_rtc_remove),
+};
+
+static int __init msm6242_rtc_init(void)
+{
+	return platform_driver_probe(&msm6242_rtc_driver, msm6242_rtc_probe);
+}
+
+static void __exit msm6242_rtc_fini(void)
+{
+	platform_driver_unregister(&msm6242_rtc_driver);
+}
+
+module_init(msm6242_rtc_init);
+module_exit(msm6242_rtc_fini);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Oki MSM6242 RTC driver");
+MODULE_ALIAS("platform:rtc-msm6242");
diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
index 33a10c4..4c5d5d0 100644
--- a/drivers/rtc/rtc-pcf50633.c
+++ b/drivers/rtc/rtc-pcf50633.c
@@ -292,8 +292,9 @@
 				&pcf50633_rtc_ops, THIS_MODULE);
 
 	if (IS_ERR(rtc->rtc_dev)) {
+		int ret =  PTR_ERR(rtc->rtc_dev);
 		kfree(rtc);
-		return PTR_ERR(rtc->rtc_dev);
+		return ret;
 	}
 
 	pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_ALARM,
diff --git a/drivers/rtc/rtc-rp5c01.c b/drivers/rtc/rtc-rp5c01.c
new file mode 100644
index 0000000..e1313fe
--- /dev/null
+++ b/drivers/rtc/rtc-rp5c01.c
@@ -0,0 +1,222 @@
+/*
+ *  Ricoh RP5C01 RTC Driver
+ *
+ *  Copyright 2009 Geert Uytterhoeven
+ *
+ *  Based on the A3000 TOD code in arch/m68k/amiga/config.c
+ *  Copyright (C) 1993 Hamish Macdonald
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+
+
+enum {
+	RP5C01_1_SECOND		= 0x0,	/* MODE 00 */
+	RP5C01_10_SECOND	= 0x1,	/* MODE 00 */
+	RP5C01_1_MINUTE		= 0x2,	/* MODE 00 and MODE 01 */
+	RP5C01_10_MINUTE	= 0x3,	/* MODE 00 and MODE 01 */
+	RP5C01_1_HOUR		= 0x4,	/* MODE 00 and MODE 01 */
+	RP5C01_10_HOUR		= 0x5,	/* MODE 00 and MODE 01 */
+	RP5C01_DAY_OF_WEEK	= 0x6,	/* MODE 00 and MODE 01 */
+	RP5C01_1_DAY		= 0x7,	/* MODE 00 and MODE 01 */
+	RP5C01_10_DAY		= 0x8,	/* MODE 00 and MODE 01 */
+	RP5C01_1_MONTH		= 0x9,	/* MODE 00 */
+	RP5C01_10_MONTH		= 0xa,	/* MODE 00 */
+	RP5C01_1_YEAR		= 0xb,	/* MODE 00 */
+	RP5C01_10_YEAR		= 0xc,	/* MODE 00 */
+
+	RP5C01_12_24_SELECT	= 0xa,	/* MODE 01 */
+	RP5C01_LEAP_YEAR	= 0xb,	/* MODE 01 */
+
+	RP5C01_MODE		= 0xd,	/* all modes */
+	RP5C01_TEST		= 0xe,	/* all modes */
+	RP5C01_RESET		= 0xf,	/* all modes */
+};
+
+#define RP5C01_12_24_SELECT_12	(0 << 0)
+#define RP5C01_12_24_SELECT_24	(1 << 0)
+
+#define RP5C01_10_HOUR_AM	(0 << 1)
+#define RP5C01_10_HOUR_PM	(1 << 1)
+
+#define RP5C01_MODE_TIMER_EN	(1 << 3)	/* timer enable */
+#define RP5C01_MODE_ALARM_EN	(1 << 2)	/* alarm enable */
+
+#define RP5C01_MODE_MODE_MASK	(3 << 0)
+#define RP5C01_MODE_MODE00	(0 << 0)	/* time */
+#define RP5C01_MODE_MODE01	(1 << 0)	/* alarm, 12h/24h, leap year */
+#define RP5C01_MODE_RAM_BLOCK10	(2 << 0)	/* RAM 4 bits x 13 */
+#define RP5C01_MODE_RAM_BLOCK11	(3 << 0)	/* RAM 4 bits x 13 */
+
+#define RP5C01_RESET_1HZ_PULSE	(1 << 3)
+#define RP5C01_RESET_16HZ_PULSE	(1 << 2)
+#define RP5C01_RESET_SECOND	(1 << 1)	/* reset divider stages for */
+						/* seconds or smaller units */
+#define RP5C01_RESET_ALARM	(1 << 0)	/* reset all alarm registers */
+
+
+struct rp5c01_priv {
+	u32 __iomem *regs;
+	struct rtc_device *rtc;
+};
+
+static inline unsigned int rp5c01_read(struct rp5c01_priv *priv,
+				       unsigned int reg)
+{
+	return __raw_readl(&priv->regs[reg]) & 0xf;
+}
+
+static inline void rp5c01_write(struct rp5c01_priv *priv, unsigned int val,
+				unsigned int reg)
+{
+	return __raw_writel(val, &priv->regs[reg]);
+}
+
+static void rp5c01_lock(struct rp5c01_priv *priv)
+{
+	rp5c01_write(priv, RP5C01_MODE_MODE00, RP5C01_MODE);
+}
+
+static void rp5c01_unlock(struct rp5c01_priv *priv)
+{
+	rp5c01_write(priv, RP5C01_MODE_TIMER_EN | RP5C01_MODE_MODE01,
+		     RP5C01_MODE);
+}
+
+static int rp5c01_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rp5c01_priv *priv = dev_get_drvdata(dev);
+
+	rp5c01_lock(priv);
+
+	tm->tm_sec  = rp5c01_read(priv, RP5C01_10_SECOND) * 10 +
+		      rp5c01_read(priv, RP5C01_1_SECOND);
+	tm->tm_min  = rp5c01_read(priv, RP5C01_10_MINUTE) * 10 +
+		      rp5c01_read(priv, RP5C01_1_MINUTE);
+	tm->tm_hour = rp5c01_read(priv, RP5C01_10_HOUR) * 10 +
+		      rp5c01_read(priv, RP5C01_1_HOUR);
+	tm->tm_mday = rp5c01_read(priv, RP5C01_10_DAY) * 10 +
+		      rp5c01_read(priv, RP5C01_1_DAY);
+	tm->tm_wday = rp5c01_read(priv, RP5C01_DAY_OF_WEEK);
+	tm->tm_mon  = rp5c01_read(priv, RP5C01_10_MONTH) * 10 +
+		      rp5c01_read(priv, RP5C01_1_MONTH) - 1;
+	tm->tm_year = rp5c01_read(priv, RP5C01_10_YEAR) * 10 +
+		      rp5c01_read(priv, RP5C01_1_YEAR);
+	if (tm->tm_year <= 69)
+		tm->tm_year += 100;
+
+	rp5c01_unlock(priv);
+
+	return rtc_valid_tm(tm);
+}
+
+static int rp5c01_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct rp5c01_priv *priv = dev_get_drvdata(dev);
+
+	rp5c01_lock(priv);
+
+	rp5c01_write(priv, tm->tm_sec / 10, RP5C01_10_SECOND);
+	rp5c01_write(priv, tm->tm_sec % 10, RP5C01_1_SECOND);
+	rp5c01_write(priv, tm->tm_min / 10, RP5C01_10_MINUTE);
+	rp5c01_write(priv, tm->tm_min % 10, RP5C01_1_MINUTE);
+	rp5c01_write(priv, tm->tm_hour / 10, RP5C01_10_HOUR);
+	rp5c01_write(priv, tm->tm_hour % 10, RP5C01_1_HOUR);
+	rp5c01_write(priv, tm->tm_mday / 10, RP5C01_10_DAY);
+	rp5c01_write(priv, tm->tm_mday % 10, RP5C01_1_DAY);
+	if (tm->tm_wday != -1)
+		rp5c01_write(priv, tm->tm_wday, RP5C01_DAY_OF_WEEK);
+	rp5c01_write(priv, (tm->tm_mon + 1) / 10, RP5C01_10_MONTH);
+	rp5c01_write(priv, (tm->tm_mon + 1) % 10, RP5C01_1_MONTH);
+	if (tm->tm_year >= 100)
+		tm->tm_year -= 100;
+	rp5c01_write(priv, tm->tm_year / 10, RP5C01_10_YEAR);
+	rp5c01_write(priv, tm->tm_year % 10, RP5C01_1_YEAR);
+
+	rp5c01_unlock(priv);
+	return 0;
+}
+
+static const struct rtc_class_ops rp5c01_rtc_ops = {
+	.read_time	= rp5c01_read_time,
+	.set_time	= rp5c01_set_time,
+};
+
+static int __init rp5c01_rtc_probe(struct platform_device *dev)
+{
+	struct resource *res;
+	struct rp5c01_priv *priv;
+	struct rtc_device *rtc;
+	int error;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regs = ioremap(res->start, resource_size(res));
+	if (!priv->regs) {
+		error = -ENOMEM;
+		goto out_free_priv;
+	}
+
+	rtc = rtc_device_register("rtc-rp5c01", &dev->dev, &rp5c01_rtc_ops,
+				  THIS_MODULE);
+	if (IS_ERR(rtc)) {
+		error = PTR_ERR(rtc);
+		goto out_unmap;
+	}
+
+	priv->rtc = rtc;
+	platform_set_drvdata(dev, priv);
+	return 0;
+
+out_unmap:
+	iounmap(priv->regs);
+out_free_priv:
+	kfree(priv);
+	return error;
+}
+
+static int __exit rp5c01_rtc_remove(struct platform_device *dev)
+{
+	struct rp5c01_priv *priv = platform_get_drvdata(dev);
+
+	rtc_device_unregister(priv->rtc);
+	iounmap(priv->regs);
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver rp5c01_rtc_driver = {
+	.driver	= {
+		.name	= "rtc-rp5c01",
+		.owner	= THIS_MODULE,
+	},
+	.remove	= __exit_p(rp5c01_rtc_remove),
+};
+
+static int __init rp5c01_rtc_init(void)
+{
+	return platform_driver_probe(&rp5c01_rtc_driver, rp5c01_rtc_probe);
+}
+
+static void __exit rp5c01_rtc_fini(void)
+{
+	platform_driver_unregister(&rp5c01_rtc_driver);
+}
+
+module_init(rp5c01_rtc_init);
+module_exit(rp5c01_rtc_fini);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Ricoh RP5C01 RTC driver");
+MODULE_ALIAS("platform:rtc-rp5c01");
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index 310c107..6583c1a 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -195,7 +195,7 @@
 		/* year, since the rtc epoch*/
 		buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
 		buf[CCR_WDAY] = tm->tm_wday & 0x07;
-		buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100);
+		buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100);
 	}
 
 	/* If writing alarm registers, set compare bits on registers 0-4 */
@@ -280,9 +280,9 @@
 	int err;
 	struct rtc_time tm;
 
-	tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
+	memset(&tm, 0, sizeof(tm));
 
-	err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0);
+	err = x1205_set_datetime(client, &tm, 1, X1205_CCR_BASE, 0);
 	if (err < 0)
 		dev_err(&client->dev, "unable to restart the oscillator\n");
 
diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c
index b44462a..740fe40 100644
--- a/drivers/s390/char/sclp_async.c
+++ b/drivers/s390/char/sclp_async.c
@@ -101,18 +101,17 @@
 		.mode		= 0644,
 		.proc_handler	= proc_handler_callhome,
 	},
-	{ .ctl_name = 0 }
+	{}
 };
 
 static struct ctl_table kern_dir_table[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= callhome_table,
 	},
-	{ .ctl_name = 0 }
+	{}
 };
 
 /*
diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile
index 96eddb3..6cab5a6 100644
--- a/drivers/s390/net/Makefile
+++ b/drivers/s390/net/Makefile
@@ -3,11 +3,11 @@
 #
 
 ctcm-y += ctcm_main.o ctcm_fsms.o ctcm_mpc.o ctcm_sysfs.o ctcm_dbug.o
-obj-$(CONFIG_CTCM) += ctcm.o fsm.o cu3088.o
+obj-$(CONFIG_CTCM) += ctcm.o fsm.o
 obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o
 obj-$(CONFIG_SMSGIUCV) += smsgiucv.o
-obj-$(CONFIG_LCS) += lcs.o cu3088.o
-obj-$(CONFIG_CLAW) += claw.o cu3088.o
+obj-$(CONFIG_LCS) += lcs.o
+obj-$(CONFIG_CLAW) += claw.o
 qeth-y += qeth_core_sys.o qeth_core_main.o qeth_core_mpc.o
 obj-$(CONFIG_QETH) += qeth.o
 qeth_l2-y += qeth_l2_main.o
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index c63babe..3c77bfe 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -90,7 +90,6 @@
 #include <linux/timer.h>
 #include <linux/types.h>
 
-#include "cu3088.h"
 #include "claw.h"
 
 /*
@@ -258,6 +257,9 @@
 	return -EPERM;
 }
 
+/* the root device for claw group devices */
+static struct device *claw_root_dev;
+
 /* ccwgroup table  */
 
 static struct ccwgroup_driver claw_group_driver = {
@@ -272,6 +274,47 @@
 	.prepare     = claw_pm_prepare,
 };
 
+static struct ccw_device_id claw_ids[] = {
+	{CCW_DEVICE(0x3088, 0x61), .driver_info = claw_channel_type_claw},
+	{},
+};
+MODULE_DEVICE_TABLE(ccw, claw_ids);
+
+static struct ccw_driver claw_ccw_driver = {
+	.owner	= THIS_MODULE,
+	.name	= "claw",
+	.ids	= claw_ids,
+	.probe	= ccwgroup_probe_ccwdev,
+	.remove	= ccwgroup_remove_ccwdev,
+};
+
+static ssize_t
+claw_driver_group_store(struct device_driver *ddrv, const char *buf,
+			size_t count)
+{
+	int err;
+	err = ccwgroup_create_from_string(claw_root_dev,
+					  claw_group_driver.driver_id,
+					  &claw_ccw_driver, 3, buf);
+	return err ? err : count;
+}
+
+static DRIVER_ATTR(group, 0200, NULL, claw_driver_group_store);
+
+static struct attribute *claw_group_attrs[] = {
+	&driver_attr_group.attr,
+	NULL,
+};
+
+static struct attribute_group claw_group_attr_group = {
+	.attrs = claw_group_attrs,
+};
+
+static const struct attribute_group *claw_group_attr_groups[] = {
+	&claw_group_attr_group,
+	NULL,
+};
+
 /*
 *       Key functions
 */
@@ -3326,7 +3369,11 @@
 static void __exit
 claw_cleanup(void)
 {
-	unregister_cu3088_discipline(&claw_group_driver);
+	driver_remove_file(&claw_group_driver.driver,
+			   &driver_attr_group);
+	ccwgroup_driver_unregister(&claw_group_driver);
+	ccw_driver_unregister(&claw_ccw_driver);
+	root_device_unregister(claw_root_dev);
 	claw_unregister_debug_facility();
 	pr_info("Driver unloaded\n");
 
@@ -3348,16 +3395,31 @@
 	if (ret) {
 		pr_err("Registering with the S/390 debug feature"
 			" failed with error code %d\n", ret);
-		return ret;
+		goto out_err;
 	}
 	CLAW_DBF_TEXT(2, setup, "init_mod");
-	ret = register_cu3088_discipline(&claw_group_driver);
-	if (ret) {
-		CLAW_DBF_TEXT(2, setup, "init_bad");
-		claw_unregister_debug_facility();
-		pr_err("Registering with the cu3088 device driver failed "
-			   "with error code %d\n", ret);
-	}
+	claw_root_dev = root_device_register("qeth");
+	ret = IS_ERR(claw_root_dev) ? PTR_ERR(claw_root_dev) : 0;
+	if (ret)
+		goto register_err;
+	ret = ccw_driver_register(&claw_ccw_driver);
+	if (ret)
+		goto ccw_err;
+	claw_group_driver.driver.groups = claw_group_attr_groups;
+	ret = ccwgroup_driver_register(&claw_group_driver);
+	if (ret)
+		goto ccwgroup_err;
+	return 0;
+
+ccwgroup_err:
+	ccw_driver_unregister(&claw_ccw_driver);
+ccw_err:
+	root_device_unregister(claw_root_dev);
+register_err:
+	CLAW_DBF_TEXT(2, setup, "init_bad");
+	claw_unregister_debug_facility();
+out_err:
+	pr_err("Initializing the claw device driver failed\n");
 	return ret;
 }
 
diff --git a/drivers/s390/net/claw.h b/drivers/s390/net/claw.h
index 005072c..46d59a13 100644
--- a/drivers/s390/net/claw.h
+++ b/drivers/s390/net/claw.h
@@ -129,6 +129,18 @@
 		} \
 	} while (0)
 
+/**
+ * Enum for classifying detected devices.
+ */
+enum claw_channel_types {
+	/* Device is not a channel  */
+	claw_channel_type_none,
+
+	/* Device is a CLAW channel device */
+	claw_channel_type_claw
+};
+
+
 /*******************************************************
 *  Define Control Blocks                               *
 *                                                      *
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 4ded9ac..70eb7f1 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -44,7 +44,6 @@
 #include <asm/idals.h>
 
 #include "fsm.h"
-#include "cu3088.h"
 
 #include "ctcm_dbug.h"
 #include "ctcm_main.h"
diff --git a/drivers/s390/net/ctcm_fsms.h b/drivers/s390/net/ctcm_fsms.h
index 2326aba..046d077 100644
--- a/drivers/s390/net/ctcm_fsms.h
+++ b/drivers/s390/net/ctcm_fsms.h
@@ -39,7 +39,6 @@
 #include <asm/idals.h>
 
 #include "fsm.h"
-#include "cu3088.h"
 #include "ctcm_main.h"
 
 /*
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index c5b8387..e35713d 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -51,12 +51,16 @@
 
 #include <asm/idals.h>
 
-#include "cu3088.h"
 #include "ctcm_fsms.h"
 #include "ctcm_main.h"
 
 /* Some common global variables */
 
+/**
+ * The root device for ctcm group devices
+ */
+static struct device *ctcm_root_dev;
+
 /*
  * Linked list of all detected channels.
  */
@@ -246,7 +250,7 @@
  *
  * returns Pointer to a channel or NULL if no matching channel available.
  */
-static struct channel *channel_get(enum channel_types type,
+static struct channel *channel_get(enum ctcm_channel_types type,
 					char *id, int direction)
 {
 	struct channel *ch = channels;
@@ -1342,7 +1346,7 @@
  *
  * returns 0 on success, !0 on error.
  */
-static int add_channel(struct ccw_device *cdev, enum channel_types type,
+static int add_channel(struct ccw_device *cdev, enum ctcm_channel_types type,
 				struct ctcm_priv *priv)
 {
 	struct channel **c = &channels;
@@ -1501,13 +1505,13 @@
 /*
  * Return type of a detected device.
  */
-static enum channel_types get_channel_type(struct ccw_device_id *id)
+static enum ctcm_channel_types get_channel_type(struct ccw_device_id *id)
 {
-	enum channel_types type;
-	type = (enum channel_types)id->driver_info;
+	enum ctcm_channel_types type;
+	type = (enum ctcm_channel_types)id->driver_info;
 
-	if (type == channel_type_ficon)
-		type = channel_type_escon;
+	if (type == ctcm_channel_type_ficon)
+		type = ctcm_channel_type_escon;
 
 	return type;
 }
@@ -1525,16 +1529,21 @@
 	char read_id[CTCM_ID_SIZE];
 	char write_id[CTCM_ID_SIZE];
 	int direction;
-	enum channel_types type;
+	enum ctcm_channel_types type;
 	struct ctcm_priv *priv;
 	struct net_device *dev;
 	struct ccw_device *cdev0;
 	struct ccw_device *cdev1;
+	struct channel *readc;
+	struct channel *writec;
 	int ret;
+	int result;
 
 	priv = dev_get_drvdata(&cgdev->dev);
-	if (!priv)
-		return -ENODEV;
+	if (!priv) {
+		result = -ENODEV;
+		goto out_err_result;
+	}
 
 	cdev0 = cgdev->cdev[0];
 	cdev1 = cgdev->cdev[1];
@@ -1545,31 +1554,40 @@
 	snprintf(write_id, CTCM_ID_SIZE, "ch-%s", dev_name(&cdev1->dev));
 
 	ret = add_channel(cdev0, type, priv);
-	if (ret)
-		return ret;
+	if (ret) {
+		result = ret;
+		goto out_err_result;
+	}
 	ret = add_channel(cdev1, type, priv);
-	if (ret)
-		return ret;
+	if (ret) {
+		result = ret;
+		goto out_remove_channel1;
+	}
 
 	ret = ccw_device_set_online(cdev0);
 	if (ret != 0) {
-		/* may be ok to fail now - can be done later */
 		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s(%s) set_online rc=%d",
 				CTCM_FUNTAIL, read_id, ret);
+		result = -EIO;
+		goto out_remove_channel2;
 	}
 
 	ret = ccw_device_set_online(cdev1);
 	if (ret != 0) {
-		/* may be ok to fail now - can be done later */
 		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s(%s) set_online rc=%d",
 				CTCM_FUNTAIL, write_id, ret);
+
+		result = -EIO;
+		goto out_ccw1;
 	}
 
 	dev = ctcm_init_netdevice(priv);
-	if (dev == NULL)
-			goto out;
+	if (dev == NULL) {
+		result = -ENODEV;
+		goto out_ccw2;
+	}
 
 	for (direction = READ; direction <= WRITE; direction++) {
 		priv->channel[direction] =
@@ -1587,12 +1605,14 @@
 	/* sysfs magic */
 	SET_NETDEV_DEV(dev, &cgdev->dev);
 
-	if (register_netdev(dev))
-			goto out_dev;
+	if (register_netdev(dev)) {
+		result = -ENODEV;
+		goto out_dev;
+	}
 
 	if (ctcm_add_attributes(&cgdev->dev)) {
-		unregister_netdev(dev);
-			goto out_dev;
+		result = -ENODEV;
+		goto out_unregister;
 	}
 
 	strlcpy(priv->fsm->name, dev->name, sizeof(priv->fsm->name));
@@ -1608,13 +1628,22 @@
 			priv->channel[WRITE]->id, priv->protocol);
 
 	return 0;
+out_unregister:
+	unregister_netdev(dev);
 out_dev:
 	ctcm_free_netdevice(dev);
-out:
+out_ccw2:
 	ccw_device_set_offline(cgdev->cdev[1]);
+out_ccw1:
 	ccw_device_set_offline(cgdev->cdev[0]);
-
-	return -ENODEV;
+out_remove_channel2:
+	readc = channel_get(type, read_id, READ);
+	channel_remove(readc);
+out_remove_channel1:
+	writec = channel_get(type, write_id, WRITE);
+	channel_remove(writec);
+out_err_result:
+	return result;
 }
 
 /**
@@ -1695,6 +1724,11 @@
 		return 0;
 	netif_device_detach(priv->channel[READ]->netdev);
 	ctcm_close(priv->channel[READ]->netdev);
+	if (!wait_event_timeout(priv->fsm->wait_q,
+	    fsm_getstate(priv->fsm) == DEV_STATE_STOPPED, CTCM_TIME_5_SEC)) {
+		netif_device_attach(priv->channel[READ]->netdev);
+		return -EBUSY;
+	}
 	ccw_device_set_offline(gdev->cdev[1]);
 	ccw_device_set_offline(gdev->cdev[0]);
 	return 0;
@@ -1719,6 +1753,22 @@
 	return rc;
 }
 
+static struct ccw_device_id ctcm_ids[] = {
+	{CCW_DEVICE(0x3088, 0x08), .driver_info = ctcm_channel_type_parallel},
+	{CCW_DEVICE(0x3088, 0x1e), .driver_info = ctcm_channel_type_ficon},
+	{CCW_DEVICE(0x3088, 0x1f), .driver_info = ctcm_channel_type_escon},
+	{},
+};
+MODULE_DEVICE_TABLE(ccw, ctcm_ids);
+
+static struct ccw_driver ctcm_ccw_driver = {
+	.owner	= THIS_MODULE,
+	.name	= "ctcm",
+	.ids	= ctcm_ids,
+	.probe	= ccwgroup_probe_ccwdev,
+	.remove	= ccwgroup_remove_ccwdev,
+};
+
 static struct ccwgroup_driver ctcm_group_driver = {
 	.owner       = THIS_MODULE,
 	.name        = CTC_DRIVER_NAME,
@@ -1733,6 +1783,33 @@
 	.restore     = ctcm_pm_resume,
 };
 
+static ssize_t
+ctcm_driver_group_store(struct device_driver *ddrv, const char *buf,
+			size_t count)
+{
+	int err;
+
+	err = ccwgroup_create_from_string(ctcm_root_dev,
+					  ctcm_group_driver.driver_id,
+					  &ctcm_ccw_driver, 2, buf);
+	return err ? err : count;
+}
+
+static DRIVER_ATTR(group, 0200, NULL, ctcm_driver_group_store);
+
+static struct attribute *ctcm_group_attrs[] = {
+	&driver_attr_group.attr,
+	NULL,
+};
+
+static struct attribute_group ctcm_group_attr_group = {
+	.attrs = ctcm_group_attrs,
+};
+
+static const struct attribute_group *ctcm_group_attr_groups[] = {
+	&ctcm_group_attr_group,
+	NULL,
+};
 
 /*
  * Module related routines
@@ -1746,7 +1823,10 @@
  */
 static void __exit ctcm_exit(void)
 {
-	unregister_cu3088_discipline(&ctcm_group_driver);
+	driver_remove_file(&ctcm_group_driver.driver, &driver_attr_group);
+	ccwgroup_driver_unregister(&ctcm_group_driver);
+	ccw_driver_unregister(&ctcm_ccw_driver);
+	root_device_unregister(ctcm_root_dev);
 	ctcm_unregister_dbf_views();
 	pr_info("CTCM driver unloaded\n");
 }
@@ -1772,17 +1852,31 @@
 	channels = NULL;
 
 	ret = ctcm_register_dbf_views();
-	if (ret) {
-		return ret;
-	}
-	ret = register_cu3088_discipline(&ctcm_group_driver);
-	if (ret) {
-		ctcm_unregister_dbf_views();
-		pr_err("%s / register_cu3088_discipline failed, ret = %d\n",
-			__func__, ret);
-		return ret;
-	}
+	if (ret)
+		goto out_err;
+	ctcm_root_dev = root_device_register("ctcm");
+	ret = IS_ERR(ctcm_root_dev) ? PTR_ERR(ctcm_root_dev) : 0;
+	if (ret)
+		goto register_err;
+	ret = ccw_driver_register(&ctcm_ccw_driver);
+	if (ret)
+		goto ccw_err;
+	ctcm_group_driver.driver.groups = ctcm_group_attr_groups;
+	ret = ccwgroup_driver_register(&ctcm_group_driver);
+	if (ret)
+		goto ccwgroup_err;
 	print_banner();
+	return 0;
+
+ccwgroup_err:
+	ccw_driver_unregister(&ctcm_ccw_driver);
+ccw_err:
+	root_device_unregister(ctcm_root_dev);
+register_err:
+	ctcm_unregister_dbf_views();
+out_err:
+	pr_err("%s / Initializing the ctcm device driver failed, ret = %d\n",
+		__func__, ret);
 	return ret;
 }
 
diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h
index d925e73..d34fa14 100644
--- a/drivers/s390/net/ctcm_main.h
+++ b/drivers/s390/net/ctcm_main.h
@@ -16,7 +16,6 @@
 #include <linux/netdevice.h>
 
 #include "fsm.h"
-#include "cu3088.h"
 #include "ctcm_dbug.h"
 #include "ctcm_mpc.h"
 
@@ -66,6 +65,23 @@
 			ctcmpc_dumpit(buf, len); \
 	} while (0)
 
+/**
+ * Enum for classifying detected devices
+ */
+enum ctcm_channel_types {
+	/* Device is not a channel  */
+	ctcm_channel_type_none,
+
+	/* Device is a CTC/A */
+	ctcm_channel_type_parallel,
+
+	/* Device is a FICON channel */
+	ctcm_channel_type_ficon,
+
+	/* Device is a ESCON channel */
+	ctcm_channel_type_escon
+};
+
 /*
  * CCW commands, used in this driver.
  */
@@ -121,7 +137,7 @@
 	 * Type of this channel.
 	 * CTC/A or Escon for valid channels.
 	 */
-	enum channel_types type;
+	enum ctcm_channel_types type;
 	/*
 	 * Misc. flags. See CHANNEL_FLAGS_... below
 	 */
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 781e18b..5978b39 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -53,7 +53,6 @@
 #include <linux/moduleparam.h>
 #include <asm/idals.h>
 
-#include "cu3088.h"
 #include "ctcm_mpc.h"
 #include "ctcm_main.h"
 #include "ctcm_fsms.h"
diff --git a/drivers/s390/net/ctcm_sysfs.c b/drivers/s390/net/ctcm_sysfs.c
index 8452bb0..738ad26c7 100644
--- a/drivers/s390/net/ctcm_sysfs.c
+++ b/drivers/s390/net/ctcm_sysfs.c
@@ -158,6 +158,15 @@
 	return count;
 }
 
+const char *ctcm_type[] = {
+	"not a channel",
+	"CTC/A",
+	"FICON channel",
+	"ESCON channel",
+	"unknown channel type",
+	"unsupported channel type",
+};
+
 static ssize_t ctcm_type_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
@@ -168,7 +177,7 @@
 		return -ENODEV;
 
 	return sprintf(buf, "%s\n",
-			cu3088_type[cgdev->cdev[0]->id.driver_info]);
+			ctcm_type[cgdev->cdev[0]->id.driver_info]);
 }
 
 static DEVICE_ATTR(buffer, 0644, ctcm_buffer_show, ctcm_buffer_write);
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
deleted file mode 100644
index 4838345..0000000
--- a/drivers/s390/net/cu3088.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * CTC / LCS ccw_device driver
- *
- * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Arnd Bergmann <arndb@de.ibm.com>
- *            Cornelia Huck <cornelia.huck@de.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/err.h>
-
-#include <asm/ccwdev.h>
-#include <asm/ccwgroup.h>
-
-#include "cu3088.h"
-
-const char *cu3088_type[] = {
-	"not a channel",
-	"CTC/A",
-	"ESCON channel",
-	"FICON channel",
-	"OSA LCS card",
-	"CLAW channel device",
-	"unknown channel type",
-	"unsupported channel type",
-};
-
-/* static definitions */
-
-static struct ccw_device_id cu3088_ids[] = {
-	{ CCW_DEVICE(0x3088, 0x08), .driver_info = channel_type_parallel },
-	{ CCW_DEVICE(0x3088, 0x1f), .driver_info = channel_type_escon },
-	{ CCW_DEVICE(0x3088, 0x1e), .driver_info = channel_type_ficon },
-	{ CCW_DEVICE(0x3088, 0x60), .driver_info = channel_type_osa2 },
-	{ CCW_DEVICE(0x3088, 0x61), .driver_info = channel_type_claw },
-	{ /* end of list */ }
-};
-
-static struct ccw_driver cu3088_driver;
-
-static struct device *cu3088_root_dev;
-
-static ssize_t
-group_write(struct device_driver *drv, const char *buf, size_t count)
-{
-	int ret;
-	struct ccwgroup_driver *cdrv;
-
-	cdrv = to_ccwgroupdrv(drv);
-	if (!cdrv)
-		return -EINVAL;
-	ret = ccwgroup_create_from_string(cu3088_root_dev, cdrv->driver_id,
-					  &cu3088_driver, 2, buf);
-
-	return (ret == 0) ? count : ret;
-}
-
-static DRIVER_ATTR(group, 0200, NULL, group_write);
-
-/* Register-unregister for ctc&lcs */
-int
-register_cu3088_discipline(struct ccwgroup_driver *dcp)
-{
-	int rc;
-
-	if (!dcp)
-		return -EINVAL;
-
-	/* Register discipline.*/
-	rc = ccwgroup_driver_register(dcp);
-	if (rc)
-		return rc;
-
-	rc = driver_create_file(&dcp->driver, &driver_attr_group);
-	if (rc)
-		ccwgroup_driver_unregister(dcp);
-
-	return rc;
-
-}
-
-void
-unregister_cu3088_discipline(struct ccwgroup_driver *dcp)
-{
-	if (!dcp)
-		return;
-
-	driver_remove_file(&dcp->driver, &driver_attr_group);
-	ccwgroup_driver_unregister(dcp);
-}
-
-static struct ccw_driver cu3088_driver = {
-	.owner	     = THIS_MODULE,
-	.ids	     = cu3088_ids,
-	.name        = "cu3088",
-	.probe	     = ccwgroup_probe_ccwdev,
-	.remove	     = ccwgroup_remove_ccwdev,
-};
-
-/* module setup */
-static int __init
-cu3088_init (void)
-{
-	int rc;
-
-	cu3088_root_dev = root_device_register("cu3088");
-	if (IS_ERR(cu3088_root_dev))
-		return PTR_ERR(cu3088_root_dev);
-	rc = ccw_driver_register(&cu3088_driver);
-	if (rc)
-		root_device_unregister(cu3088_root_dev);
-
-	return rc;
-}
-
-static void __exit
-cu3088_exit (void)
-{
-	ccw_driver_unregister(&cu3088_driver);
-	root_device_unregister(cu3088_root_dev);
-}
-
-MODULE_DEVICE_TABLE(ccw,cu3088_ids);
-MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
-MODULE_LICENSE("GPL");
-
-module_init(cu3088_init);
-module_exit(cu3088_exit);
-
-EXPORT_SYMBOL_GPL(cu3088_type);
-EXPORT_SYMBOL_GPL(register_cu3088_discipline);
-EXPORT_SYMBOL_GPL(unregister_cu3088_discipline);
diff --git a/drivers/s390/net/cu3088.h b/drivers/s390/net/cu3088.h
deleted file mode 100644
index d8558a7..0000000
--- a/drivers/s390/net/cu3088.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef _CU3088_H
-#define _CU3088_H
-
-/**
- * Enum for classifying detected devices.
- */
-enum channel_types {
-        /* Device is not a channel  */
-	channel_type_none,
-
-        /* Device is a CTC/A */
-	channel_type_parallel,
-
-	/* Device is a ESCON channel */
-	channel_type_escon,
-
-	/* Device is a FICON channel */
-	channel_type_ficon,
-
-	/* Device is a OSA2 card */
-	channel_type_osa2,
-
-	/* Device is a CLAW channel device */
-	channel_type_claw,
-
-	/* Device is a channel, but we don't know
-	 * anything about it */
-	channel_type_unknown,
-
-	/* Device is an unsupported model */
-	channel_type_unsupported,
-
-	/* number of type entries */
-	num_channel_types
-};
-
-extern const char *cu3088_type[num_channel_types];
-extern int register_cu3088_discipline(struct ccwgroup_driver *);
-extern void unregister_cu3088_discipline(struct ccwgroup_driver *);
-
-#endif
diff --git a/drivers/s390/net/fsm.c b/drivers/s390/net/fsm.c
index 2c1db80..cae48cb 100644
--- a/drivers/s390/net/fsm.c
+++ b/drivers/s390/net/fsm.c
@@ -27,6 +27,7 @@
 		return NULL;
 	}
 	strlcpy(this->name, name, sizeof(this->name));
+	init_waitqueue_head(&this->wait_q);
 
 	f = kzalloc(sizeof(fsm), order);
 	if (f == NULL) {
diff --git a/drivers/s390/net/fsm.h b/drivers/s390/net/fsm.h
index af679c1..1e8b235 100644
--- a/drivers/s390/net/fsm.h
+++ b/drivers/s390/net/fsm.h
@@ -66,6 +66,7 @@
 	char name[16];
 	void *userdata;
 	int userint;
+	wait_queue_head_t wait_q;
 #if FSM_DEBUG_HISTORY
 	int         history_index;
 	int         history_size;
@@ -197,6 +198,7 @@
 	printk(KERN_DEBUG "fsm(%s): New state %s\n", fi->name,
 		fi->f->state_names[newstate]);
 #endif
+	wake_up(&fi->wait_q);
 }
 
 /**
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index a70de9b..f6cc46d 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -47,7 +47,6 @@
 #include <asm/ccwgroup.h>
 
 #include "lcs.h"
-#include "cu3088.h"
 
 
 #if !defined(CONFIG_NET_ETHERNET) && \
@@ -60,7 +59,11 @@
  */
 
 static char version[] __initdata = "LCS driver";
-static char debug_buffer[255];
+
+/**
+  * the root device for lcs group devices
+  */
+static struct device *lcs_root_dev;
 
 /**
  * Some prototypes.
@@ -76,6 +79,7 @@
 /**
  * Debug Facility Stuff
  */
+static char debug_buffer[255];
 static debug_info_t *lcs_dbf_setup;
 static debug_info_t *lcs_dbf_trace;
 
@@ -889,7 +893,7 @@
 	rc = lcs_ready_buffer(&card->write, buffer);
 	if (rc)
 		return rc;
-	init_timer(&timer);
+	init_timer_on_stack(&timer);
 	timer.function = lcs_lancmd_timeout;
 	timer.data = (unsigned long) reply;
 	timer.expires = jiffies + HZ*card->lancmd_timeout;
@@ -1968,6 +1972,15 @@
 
 static DEVICE_ATTR(portno, 0644, lcs_portno_show, lcs_portno_store);
 
+const char *lcs_type[] = {
+	"not a channel",
+	"2216 parallel",
+	"2216 channel",
+	"OSA LCS card",
+	"unknown channel type",
+	"unsupported channel type",
+};
+
 static ssize_t
 lcs_type_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -1977,7 +1990,7 @@
 	if (!cgdev)
 		return -ENODEV;
 
-	return sprintf(buf, "%s\n", cu3088_type[cgdev->cdev[0]->id.driver_info]);
+	return sprintf(buf, "%s\n", lcs_type[cgdev->cdev[0]->id.driver_info]);
 }
 
 static DEVICE_ATTR(type, 0444, lcs_type_show, NULL);
@@ -2130,8 +2143,12 @@
 	card->write.ccwdev = ccwgdev->cdev[1];
 
 	recover_state = card->state;
-	ccw_device_set_online(card->read.ccwdev);
-	ccw_device_set_online(card->write.ccwdev);
+	rc = ccw_device_set_online(card->read.ccwdev);
+	if (rc)
+		goto out_err;
+	rc = ccw_device_set_online(card->write.ccwdev);
+	if (rc)
+		goto out_werr;
 
 	LCS_DBF_TEXT(3, setup, "lcsnewdv");
 
@@ -2210,8 +2227,10 @@
 	return 0;
 out:
 
-	ccw_device_set_offline(card->read.ccwdev);
 	ccw_device_set_offline(card->write.ccwdev);
+out_werr:
+	ccw_device_set_offline(card->read.ccwdev);
+out_err:
 	return -ENODEV;
 }
 
@@ -2364,6 +2383,22 @@
 	return lcs_pm_resume(card);
 }
 
+static struct ccw_device_id lcs_ids[] = {
+	{CCW_DEVICE(0x3088, 0x08), .driver_info = lcs_channel_type_parallel},
+	{CCW_DEVICE(0x3088, 0x1f), .driver_info = lcs_channel_type_2216},
+	{CCW_DEVICE(0x3088, 0x60), .driver_info = lcs_channel_type_osa2},
+	{},
+};
+MODULE_DEVICE_TABLE(ccw, lcs_ids);
+
+static struct ccw_driver lcs_ccw_driver = {
+	.owner	= THIS_MODULE,
+	.name	= "lcs",
+	.ids	= lcs_ids,
+	.probe	= ccwgroup_probe_ccwdev,
+	.remove	= ccwgroup_remove_ccwdev,
+};
+
 /**
  * LCS ccwgroup driver registration
  */
@@ -2383,6 +2418,33 @@
 	.restore     = lcs_restore,
 };
 
+static ssize_t
+lcs_driver_group_store(struct device_driver *ddrv, const char *buf,
+		       size_t count)
+{
+	int err;
+	err = ccwgroup_create_from_string(lcs_root_dev,
+					  lcs_group_driver.driver_id,
+					  &lcs_ccw_driver, 2, buf);
+	return err ? err : count;
+}
+
+static DRIVER_ATTR(group, 0200, NULL, lcs_driver_group_store);
+
+static struct attribute *lcs_group_attrs[] = {
+	&driver_attr_group.attr,
+	NULL,
+};
+
+static struct attribute_group lcs_group_attr_group = {
+	.attrs = lcs_group_attrs,
+};
+
+static const struct attribute_group *lcs_group_attr_groups[] = {
+	&lcs_group_attr_group,
+	NULL,
+};
+
 /**
  *  LCS Module/Kernel initialization function
  */
@@ -2394,17 +2456,30 @@
 	pr_info("Loading %s\n", version);
 	rc = lcs_register_debug_facility();
 	LCS_DBF_TEXT(0, setup, "lcsinit");
-	if (rc) {
-		pr_err("Initialization failed\n");
-		return rc;
-	}
-
-	rc = register_cu3088_discipline(&lcs_group_driver);
-	if (rc) {
-		pr_err("Initialization failed\n");
-		return rc;
-	}
+	if (rc)
+		goto out_err;
+	lcs_root_dev = root_device_register("lcs");
+	rc = IS_ERR(lcs_root_dev) ? PTR_ERR(lcs_root_dev) : 0;
+	if (rc)
+		goto register_err;
+	rc = ccw_driver_register(&lcs_ccw_driver);
+	if (rc)
+		goto ccw_err;
+	lcs_group_driver.driver.groups = lcs_group_attr_groups;
+	rc = ccwgroup_driver_register(&lcs_group_driver);
+	if (rc)
+		goto ccwgroup_err;
 	return 0;
+
+ccwgroup_err:
+	ccw_driver_unregister(&lcs_ccw_driver);
+ccw_err:
+	root_device_unregister(lcs_root_dev);
+register_err:
+	lcs_unregister_debug_facility();
+out_err:
+	pr_err("Initializing the lcs device driver failed\n");
+	return rc;
 }
 
 
@@ -2416,7 +2491,11 @@
 {
 	pr_info("Terminating lcs module.\n");
 	LCS_DBF_TEXT(0, trace, "cleanup");
-	unregister_cu3088_discipline(&lcs_group_driver);
+	driver_remove_file(&lcs_group_driver.driver,
+			   &driver_attr_group);
+	ccwgroup_driver_unregister(&lcs_group_driver);
+	ccw_driver_unregister(&lcs_ccw_driver);
+	root_device_unregister(lcs_root_dev);
 	lcs_unregister_debug_facility();
 }
 
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index 6d668642..8c03392 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -36,6 +36,24 @@
 #define CARD_FROM_DEV(cdev) \
 	(struct lcs_card *) dev_get_drvdata( \
 		&((struct ccwgroup_device *)dev_get_drvdata(&cdev->dev))->dev);
+
+/**
+ * Enum for classifying detected devices.
+ */
+enum lcs_channel_types {
+	/* Device is not a channel  */
+	lcs_channel_type_none,
+
+	/* Device is a 2216 channel */
+	lcs_channel_type_parallel,
+
+	/* Device is a 2216 channel */
+	lcs_channel_type_2216,
+
+	/* Device is a OSA2 card */
+	lcs_channel_type_osa2
+};
+
 /**
  * CCW commands used in this driver
  */
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index c84eadd..395c04c 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -741,13 +741,13 @@
 	if (single_flag) {
 		if ((skb = skb_dequeue(&conn->commit_queue))) {
 			atomic_dec(&skb->users);
-			dev_kfree_skb_any(skb);
 			if (privptr) {
 				privptr->stats.tx_packets++;
 				privptr->stats.tx_bytes +=
 					(skb->len - NETIUCV_HDRLEN
-					 	  - NETIUCV_HDRLEN);
+						  - NETIUCV_HDRLEN);
 			}
+			dev_kfree_skb_any(skb);
 		}
 	}
 	conn->tx_buff->data = conn->tx_buff->head;
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 31a2b4e..b232693 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -122,7 +122,6 @@
 	__u64 outbound_do_qdio_start_time;
 	unsigned int outbound_do_qdio_cnt;
 	unsigned int outbound_do_qdio_time;
-	/* eddp data */
 	unsigned int large_send_bytes;
 	unsigned int large_send_cnt;
 	unsigned int sg_skbs_sent;
@@ -135,6 +134,7 @@
 	unsigned int sg_frags_rx;
 	unsigned int sg_alloc_page_rx;
 	unsigned int tx_csum;
+	unsigned int tx_lin;
 };
 
 /* Routing stuff */
@@ -648,6 +648,7 @@
 	enum qeth_large_send_types large_send;
 	int performance_stats;
 	int rx_sg_cb;
+	enum qeth_ipa_isolation_modes isolation;
 };
 
 /*
@@ -776,7 +777,6 @@
 	list_add_tail(&entry->list, &card->qdio.in_buf_pool.entry_list);
 }
 
-struct qeth_eddp_context;
 extern struct ccwgroup_driver qeth_l2_ccwgroup_driver;
 extern struct ccwgroup_driver qeth_l3_ccwgroup_driver;
 const char *qeth_get_cardname_short(struct qeth_card *);
@@ -836,7 +836,6 @@
 struct qeth_cmd_buffer *qeth_wait_for_buffer(struct qeth_channel *);
 int qeth_mdio_read(struct net_device *, int, int);
 int qeth_snmp_command(struct qeth_card *, char __user *);
-int qeth_set_large_send(struct qeth_card *, enum qeth_large_send_types);
 struct qeth_cmd_buffer *qeth_get_adapter_cmd(struct qeth_card *, __u32, __u32);
 int qeth_default_setadapterparms_cb(struct qeth_card *, struct qeth_reply *,
 					unsigned long);
@@ -849,13 +848,14 @@
 			struct sk_buff *, struct qeth_hdr *, int, int, int);
 int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
 		    struct sk_buff *, struct qeth_hdr *, int);
-int qeth_core_get_stats_count(struct net_device *);
+int qeth_core_get_sset_count(struct net_device *, int);
 void qeth_core_get_ethtool_stats(struct net_device *,
 				struct ethtool_stats *, u64 *);
 void qeth_core_get_strings(struct net_device *, u32, u8 *);
 void qeth_core_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
 void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...);
 int qeth_core_ethtool_get_settings(struct net_device *, struct ethtool_cmd *);
+int qeth_set_access_ctrl_online(struct qeth_card *card);
 
 /* exports for OSN */
 int qeth_osn_assist(struct net_device *, void *, int);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c4a42d9..d34804d 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -270,41 +270,6 @@
 	return qeth_alloc_buffer_pool(card);
 }
 
-int qeth_set_large_send(struct qeth_card *card,
-		enum qeth_large_send_types type)
-{
-	int rc = 0;
-
-	if (card->dev == NULL) {
-		card->options.large_send = type;
-		return 0;
-	}
-	if (card->state == CARD_STATE_UP)
-		netif_tx_disable(card->dev);
-	card->options.large_send = type;
-	switch (card->options.large_send) {
-	case QETH_LARGE_SEND_TSO:
-		if (qeth_is_supported(card, IPA_OUTBOUND_TSO)) {
-			card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
-						NETIF_F_HW_CSUM;
-		} else {
-			card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
-						NETIF_F_HW_CSUM);
-			card->options.large_send = QETH_LARGE_SEND_NO;
-			rc = -EOPNOTSUPP;
-		}
-		break;
-	default: /* includes QETH_LARGE_SEND_NO */
-		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
-					NETIF_F_HW_CSUM);
-		break;
-	}
-	if (card->state == CARD_STATE_UP)
-		netif_wake_queue(card->dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(qeth_set_large_send);
-
 static int qeth_issue_next_read(struct qeth_card *card)
 {
 	int rc;
@@ -1079,6 +1044,7 @@
 	card->options.add_hhlen = DEFAULT_ADD_HHLEN;
 	card->options.performance_stats = 0;
 	card->options.rx_sg_cb = QETH_RX_SG_CB;
+	card->options.isolation = ISOLATION_MODE_NONE;
 }
 
 static int qeth_do_start_thread(struct qeth_card *card, unsigned long thread)
@@ -3389,6 +3355,156 @@
 }
 EXPORT_SYMBOL_GPL(qeth_setadpparms_change_macaddr);
 
+static int qeth_setadpparms_set_access_ctrl_cb(struct qeth_card *card,
+		struct qeth_reply *reply, unsigned long data)
+{
+	struct qeth_ipa_cmd *cmd;
+	struct qeth_set_access_ctrl *access_ctrl_req;
+	int rc;
+
+	QETH_DBF_TEXT(TRACE, 4, "setaccb");
+
+	cmd = (struct qeth_ipa_cmd *) data;
+	access_ctrl_req = &cmd->data.setadapterparms.data.set_access_ctrl;
+	QETH_DBF_TEXT_(SETUP, 2, "setaccb");
+	QETH_DBF_TEXT_(SETUP, 2, "%s", card->gdev->dev.kobj.name);
+	QETH_DBF_TEXT_(SETUP, 2, "rc=%d",
+		cmd->data.setadapterparms.hdr.return_code);
+	switch (cmd->data.setadapterparms.hdr.return_code) {
+	case SET_ACCESS_CTRL_RC_SUCCESS:
+	case SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED:
+	case SET_ACCESS_CTRL_RC_ALREADY_ISOLATED:
+	{
+		card->options.isolation = access_ctrl_req->subcmd_code;
+		if (card->options.isolation == ISOLATION_MODE_NONE) {
+			dev_info(&card->gdev->dev,
+			    "QDIO data connection isolation is deactivated\n");
+		} else {
+			dev_info(&card->gdev->dev,
+			    "QDIO data connection isolation is activated\n");
+		}
+		QETH_DBF_MESSAGE(3, "OK:SET_ACCESS_CTRL(%s, %d)==%d\n",
+			card->gdev->dev.kobj.name,
+			access_ctrl_req->subcmd_code,
+			cmd->data.setadapterparms.hdr.return_code);
+		rc = 0;
+		break;
+	}
+	case SET_ACCESS_CTRL_RC_NOT_SUPPORTED:
+	{
+		QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_CTRL(%s,%d)==%d\n",
+			card->gdev->dev.kobj.name,
+			access_ctrl_req->subcmd_code,
+			cmd->data.setadapterparms.hdr.return_code);
+		dev_err(&card->gdev->dev, "Adapter does not "
+			"support QDIO data connection isolation\n");
+
+		/* ensure isolation mode is "none" */
+		card->options.isolation = ISOLATION_MODE_NONE;
+		rc = -EOPNOTSUPP;
+		break;
+	}
+	case SET_ACCESS_CTRL_RC_NONE_SHARED_ADAPTER:
+	{
+		QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_MODE(%s,%d)==%d\n",
+			card->gdev->dev.kobj.name,
+			access_ctrl_req->subcmd_code,
+			cmd->data.setadapterparms.hdr.return_code);
+		dev_err(&card->gdev->dev,
+			"Adapter is dedicated. "
+			"QDIO data connection isolation not supported\n");
+
+		/* ensure isolation mode is "none" */
+		card->options.isolation = ISOLATION_MODE_NONE;
+		rc = -EOPNOTSUPP;
+		break;
+	}
+	case SET_ACCESS_CTRL_RC_ACTIVE_CHECKSUM_OFF:
+	{
+		QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_MODE(%s,%d)==%d\n",
+			card->gdev->dev.kobj.name,
+			access_ctrl_req->subcmd_code,
+			cmd->data.setadapterparms.hdr.return_code);
+		dev_err(&card->gdev->dev,
+			"TSO does not permit QDIO data connection isolation\n");
+
+		/* ensure isolation mode is "none" */
+		card->options.isolation = ISOLATION_MODE_NONE;
+		rc = -EPERM;
+		break;
+	}
+	default:
+	{
+		/* this should never happen */
+		QETH_DBF_MESSAGE(3, "ERR:SET_ACCESS_MODE(%s,%d)==%d"
+			"==UNKNOWN\n",
+			card->gdev->dev.kobj.name,
+			access_ctrl_req->subcmd_code,
+			cmd->data.setadapterparms.hdr.return_code);
+
+		/* ensure isolation mode is "none" */
+		card->options.isolation = ISOLATION_MODE_NONE;
+		rc = 0;
+		break;
+	}
+	}
+	qeth_default_setadapterparms_cb(card, reply, (unsigned long) cmd);
+	return rc;
+}
+
+static int qeth_setadpparms_set_access_ctrl(struct qeth_card *card,
+		enum qeth_ipa_isolation_modes isolation)
+{
+	int rc;
+	struct qeth_cmd_buffer *iob;
+	struct qeth_ipa_cmd *cmd;
+	struct qeth_set_access_ctrl *access_ctrl_req;
+
+	QETH_DBF_TEXT(TRACE, 4, "setacctl");
+
+	QETH_DBF_TEXT_(SETUP, 2, "setacctl");
+	QETH_DBF_TEXT_(SETUP, 2, "%s", card->gdev->dev.kobj.name);
+
+	iob = qeth_get_adapter_cmd(card, IPA_SETADP_SET_ACCESS_CONTROL,
+				   sizeof(struct qeth_ipacmd_setadpparms_hdr) +
+				   sizeof(struct qeth_set_access_ctrl));
+	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+	access_ctrl_req = &cmd->data.setadapterparms.data.set_access_ctrl;
+	access_ctrl_req->subcmd_code = isolation;
+
+	rc = qeth_send_ipa_cmd(card, iob, qeth_setadpparms_set_access_ctrl_cb,
+			       NULL);
+	QETH_DBF_TEXT_(SETUP, 2, "rc=%d", rc);
+	return rc;
+}
+
+int qeth_set_access_ctrl_online(struct qeth_card *card)
+{
+	int rc = 0;
+
+	QETH_DBF_TEXT(TRACE, 4, "setactlo");
+
+	if (card->info.type == QETH_CARD_TYPE_OSAE &&
+	    qeth_adp_supported(card, IPA_SETADP_SET_ACCESS_CONTROL)) {
+		rc = qeth_setadpparms_set_access_ctrl(card,
+			card->options.isolation);
+		if (rc) {
+			QETH_DBF_MESSAGE(3,
+				"IPA(SET_ACCESS_CTRL,%s,%d) sent failed",
+				card->gdev->dev.kobj.name,
+				rc);
+		}
+	} else if (card->options.isolation != ISOLATION_MODE_NONE) {
+		card->options.isolation = ISOLATION_MODE_NONE;
+
+		dev_err(&card->gdev->dev, "Adapter does not "
+			"support QDIO data connection isolation\n");
+		rc = -EOPNOTSUPP;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(qeth_set_access_ctrl_online);
+
 void qeth_tx_timeout(struct net_device *dev)
 {
 	struct qeth_card *card;
@@ -3732,30 +3848,36 @@
 int qeth_core_hardsetup_card(struct qeth_card *card)
 {
 	struct qdio_ssqd_desc *ssqd;
-	int retries = 3;
+	int retries = 0;
 	int mpno = 0;
 	int rc;
 
 	QETH_DBF_TEXT(SETUP, 2, "hrdsetup");
 	atomic_set(&card->force_alloc_skb, 0);
 retry:
-	if (retries < 3) {
+	if (retries)
 		QETH_DBF_MESSAGE(2, "%s Retrying to do IDX activates.\n",
 			dev_name(&card->gdev->dev));
-		ccw_device_set_offline(CARD_DDEV(card));
-		ccw_device_set_offline(CARD_WDEV(card));
-		ccw_device_set_offline(CARD_RDEV(card));
-		ccw_device_set_online(CARD_RDEV(card));
-		ccw_device_set_online(CARD_WDEV(card));
-		ccw_device_set_online(CARD_DDEV(card));
-	}
+	ccw_device_set_offline(CARD_DDEV(card));
+	ccw_device_set_offline(CARD_WDEV(card));
+	ccw_device_set_offline(CARD_RDEV(card));
+	rc = ccw_device_set_online(CARD_RDEV(card));
+	if (rc)
+		goto retriable;
+	rc = ccw_device_set_online(CARD_WDEV(card));
+	if (rc)
+		goto retriable;
+	rc = ccw_device_set_online(CARD_DDEV(card));
+	if (rc)
+		goto retriable;
 	rc = qeth_qdio_clear_card(card, card->info.type != QETH_CARD_TYPE_IQD);
+retriable:
 	if (rc == -ERESTARTSYS) {
 		QETH_DBF_TEXT(SETUP, 2, "break1");
 		return rc;
 	} else if (rc) {
 		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		if (--retries < 0)
+		if (++retries > 3)
 			goto out;
 		else
 			goto retry;
@@ -4303,13 +4425,19 @@
 	{"tx do_QDIO time"},
 	{"tx do_QDIO count"},
 	{"tx csum"},
+	{"tx lin"},
 };
 
-int qeth_core_get_stats_count(struct net_device *dev)
+int qeth_core_get_sset_count(struct net_device *dev, int stringset)
 {
-	return (sizeof(qeth_ethtool_stats_keys) / ETH_GSTRING_LEN);
+	switch (stringset) {
+	case ETH_SS_STATS:
+		return (sizeof(qeth_ethtool_stats_keys) / ETH_GSTRING_LEN);
+	default:
+		return -EINVAL;
+	}
 }
-EXPORT_SYMBOL_GPL(qeth_core_get_stats_count);
+EXPORT_SYMBOL_GPL(qeth_core_get_sset_count);
 
 void qeth_core_get_ethtool_stats(struct net_device *dev,
 		struct ethtool_stats *stats, u64 *data)
@@ -4355,6 +4483,7 @@
 	data[31] = card->perf_stats.outbound_do_qdio_time;
 	data[32] = card->perf_stats.outbound_do_qdio_cnt;
 	data[33] = card->perf_stats.tx_csum;
+	data[34] = card->perf_stats.tx_lin;
 }
 EXPORT_SYMBOL_GPL(qeth_core_get_ethtool_stats);
 
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index eecb2ee..52c0343 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -234,18 +234,19 @@
 
 /* SETADAPTER IPA Command: ****************************************************/
 enum qeth_ipa_setadp_cmd {
-	IPA_SETADP_QUERY_COMMANDS_SUPPORTED	= 0x0001,
-	IPA_SETADP_ALTER_MAC_ADDRESS		= 0x0002,
-	IPA_SETADP_ADD_DELETE_GROUP_ADDRESS	= 0x0004,
-	IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR	= 0x0008,
-	IPA_SETADP_SET_ADDRESSING_MODE		= 0x0010,
-	IPA_SETADP_SET_CONFIG_PARMS		= 0x0020,
-	IPA_SETADP_SET_CONFIG_PARMS_EXTENDED	= 0x0040,
-	IPA_SETADP_SET_BROADCAST_MODE		= 0x0080,
-	IPA_SETADP_SEND_OSA_MESSAGE		= 0x0100,
-	IPA_SETADP_SET_SNMP_CONTROL		= 0x0200,
-	IPA_SETADP_QUERY_CARD_INFO		= 0x0400,
-	IPA_SETADP_SET_PROMISC_MODE		= 0x0800,
+	IPA_SETADP_QUERY_COMMANDS_SUPPORTED	= 0x00000001L,
+	IPA_SETADP_ALTER_MAC_ADDRESS		= 0x00000002L,
+	IPA_SETADP_ADD_DELETE_GROUP_ADDRESS	= 0x00000004L,
+	IPA_SETADP_ADD_DELETE_FUNCTIONAL_ADDR	= 0x00000008L,
+	IPA_SETADP_SET_ADDRESSING_MODE		= 0x00000010L,
+	IPA_SETADP_SET_CONFIG_PARMS		= 0x00000020L,
+	IPA_SETADP_SET_CONFIG_PARMS_EXTENDED	= 0x00000040L,
+	IPA_SETADP_SET_BROADCAST_MODE		= 0x00000080L,
+	IPA_SETADP_SEND_OSA_MESSAGE		= 0x00000100L,
+	IPA_SETADP_SET_SNMP_CONTROL		= 0x00000200L,
+	IPA_SETADP_QUERY_CARD_INFO		= 0x00000400L,
+	IPA_SETADP_SET_PROMISC_MODE		= 0x00000800L,
+	IPA_SETADP_SET_ACCESS_CONTROL		= 0x00010000L,
 };
 enum qeth_ipa_mac_ops {
 	CHANGE_ADDR_READ_MAC		= 0,
@@ -264,6 +265,20 @@
 	SET_PROMISC_MODE_OFF		= 0,
 	SET_PROMISC_MODE_ON		= 1,
 };
+enum qeth_ipa_isolation_modes {
+	ISOLATION_MODE_NONE		= 0x00000000L,
+	ISOLATION_MODE_FWD		= 0x00000001L,
+	ISOLATION_MODE_DROP		= 0x00000002L,
+};
+enum qeth_ipa_set_access_mode_rc {
+	SET_ACCESS_CTRL_RC_SUCCESS		= 0x0000,
+	SET_ACCESS_CTRL_RC_NOT_SUPPORTED	= 0x0004,
+	SET_ACCESS_CTRL_RC_ALREADY_NOT_ISOLATED	= 0x0008,
+	SET_ACCESS_CTRL_RC_ALREADY_ISOLATED	= 0x0010,
+	SET_ACCESS_CTRL_RC_NONE_SHARED_ADAPTER	= 0x0014,
+	SET_ACCESS_CTRL_RC_ACTIVE_CHECKSUM_OFF	= 0x0018,
+};
+
 
 /* (SET)DELIP(M) IPA stuff ***************************************************/
 struct qeth_ipacmd_setdelip4 {
@@ -376,6 +391,11 @@
 	struct qeth_snmp_cmd cmd;
 } __attribute__((packed));
 
+/* SET_ACCESS_CONTROL: same format for request and reply */
+struct qeth_set_access_ctrl {
+	__u32 subcmd_code;
+} __attribute__((packed));
+
 struct qeth_ipacmd_setadpparms_hdr {
 	__u32 supp_hw_cmds;
 	__u32 reserved1;
@@ -394,6 +414,7 @@
 		struct qeth_query_cmds_supp query_cmds_supp;
 		struct qeth_change_addr change_addr;
 		struct qeth_snmp_cmd snmp;
+		struct qeth_set_access_ctrl set_access_ctrl;
 		__u32 mode;
 	} data;
 } __attribute__ ((packed));
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 33505c2..9ff2b36 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -416,7 +416,11 @@
 static DEVICE_ATTR(layer2, 0644, qeth_dev_layer2_show,
 		   qeth_dev_layer2_store);
 
-static ssize_t qeth_dev_large_send_show(struct device *dev,
+#define ATTR_QETH_ISOLATION_NONE	("none")
+#define ATTR_QETH_ISOLATION_FWD		("forward")
+#define ATTR_QETH_ISOLATION_DROP	("drop")
+
+static ssize_t qeth_dev_isolation_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct qeth_card *card = dev_get_drvdata(dev);
@@ -424,44 +428,69 @@
 	if (!card)
 		return -EINVAL;
 
-	switch (card->options.large_send) {
-	case QETH_LARGE_SEND_NO:
-		return sprintf(buf, "%s\n", "no");
-	case QETH_LARGE_SEND_TSO:
-		return sprintf(buf, "%s\n", "TSO");
+	switch (card->options.isolation) {
+	case ISOLATION_MODE_NONE:
+		return snprintf(buf, 6, "%s\n", ATTR_QETH_ISOLATION_NONE);
+	case ISOLATION_MODE_FWD:
+		return snprintf(buf, 9, "%s\n", ATTR_QETH_ISOLATION_FWD);
+	case ISOLATION_MODE_DROP:
+		return snprintf(buf, 6, "%s\n", ATTR_QETH_ISOLATION_DROP);
 	default:
-		return sprintf(buf, "%s\n", "N/A");
+		return snprintf(buf, 5, "%s\n", "N/A");
 	}
 }
 
-static ssize_t qeth_dev_large_send_store(struct device *dev,
+static ssize_t qeth_dev_isolation_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct qeth_card *card = dev_get_drvdata(dev);
-	enum qeth_large_send_types type;
+	enum qeth_ipa_isolation_modes isolation;
 	int rc = 0;
-	char *tmp;
+	char *tmp, *curtoken;
+	curtoken = (char *) buf;
 
-	if (!card)
-		return -EINVAL;
-	tmp = strsep((char **) &buf, "\n");
-	if (!strcmp(tmp, "no")) {
-		type = QETH_LARGE_SEND_NO;
-	} else if (!strcmp(tmp, "TSO")) {
-		type = QETH_LARGE_SEND_TSO;
-	} else {
-		return -EINVAL;
+	if (!card) {
+		rc = -EINVAL;
+		goto out;
 	}
-	if (card->options.large_send == type)
-		return count;
-	rc = qeth_set_large_send(card, type);
-	if (rc)
-		return rc;
-	return count;
+
+	/* check for unknown, too, in case we do not yet know who we are */
+	if (card->info.type != QETH_CARD_TYPE_OSAE &&
+	    card->info.type != QETH_CARD_TYPE_UNKNOWN) {
+		rc = -EOPNOTSUPP;
+		dev_err(&card->gdev->dev, "Adapter does not "
+			"support QDIO data connection isolation\n");
+		goto out;
+	}
+
+	/* parse input into isolation mode */
+	tmp = strsep(&curtoken, "\n");
+	if (!strcmp(tmp, ATTR_QETH_ISOLATION_NONE)) {
+		isolation = ISOLATION_MODE_NONE;
+	} else if (!strcmp(tmp, ATTR_QETH_ISOLATION_FWD)) {
+		isolation = ISOLATION_MODE_FWD;
+	} else if (!strcmp(tmp, ATTR_QETH_ISOLATION_DROP)) {
+		isolation = ISOLATION_MODE_DROP;
+	} else {
+		rc = -EINVAL;
+		goto out;
+	}
+	rc = count;
+
+	/* defer IP assist if device is offline (until discipline->set_online)*/
+	card->options.isolation = isolation;
+	if (card->state == CARD_STATE_SOFTSETUP ||
+	    card->state == CARD_STATE_UP) {
+		int ipa_rc = qeth_set_access_ctrl_online(card);
+		if (ipa_rc != 0)
+			rc = ipa_rc;
+	}
+out:
+	return rc;
 }
 
-static DEVICE_ATTR(large_send, 0644, qeth_dev_large_send_show,
-		   qeth_dev_large_send_store);
+static DEVICE_ATTR(isolation, 0644, qeth_dev_isolation_show,
+		   qeth_dev_isolation_store);
 
 static ssize_t qeth_dev_blkt_show(char *buf, struct qeth_card *card, int value)
 {
@@ -582,7 +611,7 @@
 	&dev_attr_recover.attr,
 	&dev_attr_performance_stats.attr,
 	&dev_attr_layer2.attr,
-	&dev_attr_large_send.attr,
+	&dev_attr_isolation.attr,
 	NULL,
 };
 
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index f4f3ca1..0b76339 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -866,7 +866,7 @@
 	.get_link = ethtool_op_get_link,
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
-	.get_stats_count = qeth_core_get_stats_count,
+	.get_sset_count = qeth_core_get_sset_count,
 	.get_drvinfo = qeth_core_get_drvinfo,
 	.get_settings = qeth_core_ethtool_get_settings,
 };
@@ -874,7 +874,7 @@
 static const struct ethtool_ops qeth_l2_osn_ops = {
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
-	.get_stats_count = qeth_core_get_stats_count,
+	.get_sset_count = qeth_core_get_sset_count,
 	.get_drvinfo = qeth_core_get_drvinfo,
 };
 
@@ -940,30 +940,17 @@
 
 	qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1);
 	recover_flag = card->state;
-	rc = ccw_device_set_online(CARD_RDEV(card));
-	if (rc) {
-		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		return -EIO;
-	}
-	rc = ccw_device_set_online(CARD_WDEV(card));
-	if (rc) {
-		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		return -EIO;
-	}
-	rc = ccw_device_set_online(CARD_DDEV(card));
-	if (rc) {
-		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		return -EIO;
-	}
-
 	rc = qeth_core_hardsetup_card(card);
 	if (rc) {
 		QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
+		rc = -ENODEV;
 		goto out_remove;
 	}
 
-	if (!card->dev && qeth_l2_setup_netdev(card))
+	if (!card->dev && qeth_l2_setup_netdev(card)) {
+		rc = -ENODEV;
 		goto out_remove;
+	}
 
 	if (card->info.type != QETH_CARD_TYPE_OSN)
 		qeth_l2_send_setmac(card, &card->dev->dev_addr[0]);
@@ -983,12 +970,14 @@
 			card->lan_online = 0;
 			return 0;
 		}
+		rc = -ENODEV;
 		goto out_remove;
 	} else
 		card->lan_online = 1;
 
 	if (card->info.type != QETH_CARD_TYPE_OSN) {
-		qeth_set_large_send(card, card->options.large_send);
+		/* configure isolation level */
+		qeth_set_access_ctrl_online(card);
 		qeth_l2_process_vlans(card, 0);
 	}
 
@@ -997,6 +986,7 @@
 	rc = qeth_init_qdio_queues(card);
 	if (rc) {
 		QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc);
+		rc = -ENODEV;
 		goto out_remove;
 	}
 	card->state = CARD_STATE_SOFTSETUP;
@@ -1018,6 +1008,7 @@
 	/* let user_space know that device is online */
 	kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
 	return 0;
+
 out_remove:
 	card->use_hard_stop = 1;
 	qeth_l2_stop_card(card, 0);
@@ -1028,7 +1019,7 @@
 		card->state = CARD_STATE_RECOVER;
 	else
 		card->state = CARD_STATE_DOWN;
-	return -ENODEV;
+	return rc;
 }
 
 static int qeth_l2_set_online(struct ccwgroup_device *gdev)
diff --git a/drivers/s390/net/qeth_l3.h b/drivers/s390/net/qeth_l3.h
index 9f143c8..321988f 100644
--- a/drivers/s390/net/qeth_l3.h
+++ b/drivers/s390/net/qeth_l3.h
@@ -60,5 +60,7 @@
 int qeth_l3_add_rxip(struct qeth_card *, enum qeth_prot_versions, const u8 *);
 void qeth_l3_del_rxip(struct qeth_card *card, enum qeth_prot_versions,
 			const u8 *);
+int qeth_l3_set_large_send(struct qeth_card *, enum qeth_large_send_types);
+int qeth_l3_set_rx_csum(struct qeth_card *, enum qeth_checksum_types);
 
 #endif /* __QETH_L3_H__ */
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 073b6d3..fd1b6ed 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -41,6 +41,32 @@
 static int __qeth_l3_set_online(struct ccwgroup_device *, int);
 static int __qeth_l3_set_offline(struct ccwgroup_device *, int);
 
+int qeth_l3_set_large_send(struct qeth_card *card,
+		enum qeth_large_send_types type)
+{
+	int rc = 0;
+
+	card->options.large_send = type;
+	if (card->dev == NULL)
+		return 0;
+
+	if (card->options.large_send == QETH_LARGE_SEND_TSO) {
+		if (qeth_is_supported(card, IPA_OUTBOUND_TSO)) {
+			card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
+					NETIF_F_HW_CSUM;
+		} else {
+			card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
+					NETIF_F_HW_CSUM);
+			card->options.large_send = QETH_LARGE_SEND_NO;
+			rc = -EOPNOTSUPP;
+		}
+	} else {
+		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
+					NETIF_F_HW_CSUM);
+		card->options.large_send = QETH_LARGE_SEND_NO;
+	}
+	return rc;
+}
 
 static int qeth_l3_isxdigit(char *buf)
 {
@@ -1439,6 +1465,35 @@
 	return 0;
 }
 
+int qeth_l3_set_rx_csum(struct qeth_card *card,
+	enum qeth_checksum_types csum_type)
+{
+	int rc = 0;
+
+	if (card->options.checksum_type == HW_CHECKSUMMING) {
+		if ((csum_type != HW_CHECKSUMMING) &&
+			(card->state != CARD_STATE_DOWN)) {
+			rc = qeth_l3_send_simple_setassparms(card,
+				IPA_INBOUND_CHECKSUM, IPA_CMD_ASS_STOP, 0);
+			if (rc)
+				return -EIO;
+		}
+	} else {
+		if (csum_type == HW_CHECKSUMMING) {
+			if (card->state != CARD_STATE_DOWN) {
+				if (!qeth_is_supported(card,
+				    IPA_INBOUND_CHECKSUM))
+					return -EPERM;
+				rc = qeth_l3_send_checksum_command(card);
+				if (rc)
+					return -EIO;
+			}
+		}
+	}
+	card->options.checksum_type = csum_type;
+	return rc;
+}
+
 static int qeth_l3_start_ipa_checksum(struct qeth_card *card)
 {
 	int rc = 0;
@@ -1506,6 +1561,8 @@
 static int qeth_l3_start_ipassists(struct qeth_card *card)
 {
 	QETH_DBF_TEXT(TRACE, 3, "strtipas");
+
+	qeth_set_access_ctrl_online(card);	/* go on*/
 	qeth_l3_start_ipa_arp_processing(card);	/* go on*/
 	qeth_l3_start_ipa_ip_fragmentation(card);	/* go on*/
 	qeth_l3_start_ipa_source_mac(card);	/* go on*/
@@ -2684,6 +2741,24 @@
 	*(__sum16 *)(skb->data + offset) = csum_fold(csum);
 }
 
+static inline int qeth_l3_tso_elements(struct sk_buff *skb)
+{
+	unsigned long tcpd = (unsigned long)tcp_hdr(skb) +
+		tcp_hdr(skb)->doff * 4;
+	int tcpd_len = skb->len - (tcpd - (unsigned long)skb->data);
+	int elements = PFN_UP(tcpd + tcpd_len) - PFN_DOWN(tcpd);
+	elements += skb_shinfo(skb)->nr_frags;
+	return elements;
+}
+
+static inline int qeth_l3_tso_check(struct sk_buff *skb)
+{
+	int len = ((unsigned long)tcp_hdr(skb) + tcp_hdr(skb)->doff * 4) -
+		(unsigned long)skb->data;
+	return (((unsigned long)skb->data & PAGE_MASK) !=
+		(((unsigned long)skb->data + len) & PAGE_MASK));
+}
+
 static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	int rc;
@@ -2777,16 +2852,21 @@
 	/* fix hardware limitation: as long as we do not have sbal
 	 * chaining we can not send long frag lists
 	 */
-	if ((large_send == QETH_LARGE_SEND_TSO) &&
-	    ((skb_shinfo(new_skb)->nr_frags + 2) > 16)) {
-		if (skb_linearize(new_skb))
-			goto tx_drop;
+	if (large_send == QETH_LARGE_SEND_TSO) {
+		if (qeth_l3_tso_elements(new_skb) + 1 > 16) {
+			if (skb_linearize(new_skb))
+				goto tx_drop;
+			if (card->options.performance_stats)
+				card->perf_stats.tx_lin++;
+		}
 	}
 
 	if ((large_send == QETH_LARGE_SEND_TSO) &&
 	    (cast_type == RTN_UNSPEC)) {
 		hdr = (struct qeth_hdr *)skb_push(new_skb,
 						sizeof(struct qeth_hdr_tso));
+		if (qeth_l3_tso_check(new_skb))
+			QETH_DBF_MESSAGE(2, "tso skb misaligned\n");
 		memset(hdr, 0, sizeof(struct qeth_hdr_tso));
 		qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type);
 		qeth_tso_fill_header(card, hdr, new_skb);
@@ -2903,46 +2983,28 @@
 static int qeth_l3_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 {
 	struct qeth_card *card = dev->ml_priv;
-	enum qeth_card_states old_state;
 	enum qeth_checksum_types csum_type;
 
-	if ((card->state != CARD_STATE_UP) &&
-	    (card->state != CARD_STATE_DOWN))
-		return -EPERM;
-
 	if (data)
 		csum_type = HW_CHECKSUMMING;
 	else
 		csum_type = SW_CHECKSUMMING;
 
-	if (card->options.checksum_type != csum_type) {
-		old_state = card->state;
-		if (card->state == CARD_STATE_UP)
-			__qeth_l3_set_offline(card->gdev, 1);
-		card->options.checksum_type = csum_type;
-		if (old_state == CARD_STATE_UP)
-			__qeth_l3_set_online(card->gdev, 1);
-	}
-	return 0;
+	return qeth_l3_set_rx_csum(card, csum_type);
 }
 
 static int qeth_l3_ethtool_set_tso(struct net_device *dev, u32 data)
 {
 	struct qeth_card *card = dev->ml_priv;
+	int rc = 0;
 
 	if (data) {
-		if (card->options.large_send == QETH_LARGE_SEND_NO) {
-			if (card->info.type == QETH_CARD_TYPE_IQD)
-				return -EPERM;
-			else
-				card->options.large_send = QETH_LARGE_SEND_TSO;
-			dev->features |= NETIF_F_TSO;
-		}
+		rc = qeth_l3_set_large_send(card, QETH_LARGE_SEND_TSO);
 	} else {
 		dev->features &= ~NETIF_F_TSO;
 		card->options.large_send = QETH_LARGE_SEND_NO;
 	}
-	return 0;
+	return rc;
 }
 
 static const struct ethtool_ops qeth_l3_ethtool_ops = {
@@ -2957,7 +3019,7 @@
 	.set_tso     = qeth_l3_ethtool_set_tso,
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
-	.get_stats_count = qeth_core_get_stats_count,
+	.get_sset_count = qeth_core_get_sset_count,
 	.get_drvinfo = qeth_core_get_drvinfo,
 	.get_settings = qeth_core_ethtool_get_settings,
 };
@@ -3058,6 +3120,7 @@
 				NETIF_F_HW_VLAN_RX |
 				NETIF_F_HW_VLAN_FILTER;
 	card->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
+	card->dev->gso_max_size = 15 * PAGE_SIZE;
 
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	return register_netdev(card->dev);
@@ -3154,32 +3217,19 @@
 	qeth_set_allowed_threads(card, QETH_RECOVER_THREAD, 1);
 
 	recover_flag = card->state;
-	rc = ccw_device_set_online(CARD_RDEV(card));
-	if (rc) {
-		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		return -EIO;
-	}
-	rc = ccw_device_set_online(CARD_WDEV(card));
-	if (rc) {
-		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		return -EIO;
-	}
-	rc = ccw_device_set_online(CARD_DDEV(card));
-	if (rc) {
-		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
-		return -EIO;
-	}
-
 	rc = qeth_core_hardsetup_card(card);
 	if (rc) {
 		QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
+		rc = -ENODEV;
 		goto out_remove;
 	}
 
 	qeth_l3_query_ipassists(card, QETH_PROT_IPV4);
 
-	if (!card->dev && qeth_l3_setup_netdev(card))
+	if (!card->dev && qeth_l3_setup_netdev(card)) {
+		rc = -ENODEV;
 		goto out_remove;
+	}
 
 	card->state = CARD_STATE_HARDSETUP;
 	qeth_print_status_message(card);
@@ -3196,10 +3246,11 @@
 			card->lan_online = 0;
 			return 0;
 		}
+		rc = -ENODEV;
 		goto out_remove;
 	} else
 		card->lan_online = 1;
-	qeth_set_large_send(card, card->options.large_send);
+	qeth_l3_set_large_send(card, card->options.large_send);
 
 	rc = qeth_l3_setadapter_parms(card);
 	if (rc)
@@ -3218,6 +3269,7 @@
 	rc = qeth_init_qdio_queues(card);
 	if (rc) {
 		QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc);
+		rc = -ENODEV;
 		goto out_remove;
 	}
 	card->state = CARD_STATE_SOFTSETUP;
@@ -3248,7 +3300,7 @@
 		card->state = CARD_STATE_RECOVER;
 	else
 		card->state = CARD_STATE_DOWN;
-	return -ENODEV;
+	return rc;
 }
 
 static int qeth_l3_set_online(struct ccwgroup_device *gdev)
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index c144b99..3360b09 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -293,31 +293,79 @@
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct qeth_card *card = dev_get_drvdata(dev);
+	enum qeth_checksum_types csum_type;
 	char *tmp;
+	int rc;
 
 	if (!card)
 		return -EINVAL;
 
-	if ((card->state != CARD_STATE_DOWN) &&
-	    (card->state != CARD_STATE_RECOVER))
-		return -EPERM;
-
 	tmp = strsep((char **) &buf, "\n");
 	if (!strcmp(tmp, "sw_checksumming"))
-		card->options.checksum_type = SW_CHECKSUMMING;
+		csum_type = SW_CHECKSUMMING;
 	else if (!strcmp(tmp, "hw_checksumming"))
-		card->options.checksum_type = HW_CHECKSUMMING;
+		csum_type = HW_CHECKSUMMING;
 	else if (!strcmp(tmp, "no_checksumming"))
-		card->options.checksum_type = NO_CHECKSUMMING;
-	else {
+		csum_type = NO_CHECKSUMMING;
+	else
 		return -EINVAL;
-	}
+
+	rc = qeth_l3_set_rx_csum(card, csum_type);
+	if (rc)
+		return rc;
 	return count;
 }
 
 static DEVICE_ATTR(checksumming, 0644, qeth_l3_dev_checksum_show,
 		qeth_l3_dev_checksum_store);
 
+static ssize_t qeth_l3_dev_large_send_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct qeth_card *card = dev_get_drvdata(dev);
+
+	if (!card)
+		return -EINVAL;
+
+	switch (card->options.large_send) {
+	case QETH_LARGE_SEND_NO:
+		return sprintf(buf, "%s\n", "no");
+	case QETH_LARGE_SEND_TSO:
+		return sprintf(buf, "%s\n", "TSO");
+	default:
+		return sprintf(buf, "%s\n", "N/A");
+	}
+}
+
+static ssize_t qeth_l3_dev_large_send_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct qeth_card *card = dev_get_drvdata(dev);
+	enum qeth_large_send_types type;
+	int rc = 0;
+	char *tmp;
+
+	if (!card)
+		return -EINVAL;
+	tmp = strsep((char **) &buf, "\n");
+	if (!strcmp(tmp, "no"))
+		type = QETH_LARGE_SEND_NO;
+	else if (!strcmp(tmp, "TSO"))
+		type = QETH_LARGE_SEND_TSO;
+	else
+		return -EINVAL;
+
+	if (card->options.large_send == type)
+		return count;
+	rc = qeth_l3_set_large_send(card, type);
+	if (rc)
+		return rc;
+	return count;
+}
+
+static DEVICE_ATTR(large_send, 0644, qeth_l3_dev_large_send_show,
+		   qeth_l3_dev_large_send_store);
+
 static struct attribute *qeth_l3_device_attrs[] = {
 	&dev_attr_route4.attr,
 	&dev_attr_route6.attr,
@@ -325,6 +373,7 @@
 	&dev_attr_broadcast_mode.attr,
 	&dev_attr_canonical_macaddr.attr,
 	&dev_attr_checksumming.attr,
+	&dev_attr_large_send.attr,
 	NULL,
 };
 
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 5fd2da4..c968cc3 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -164,8 +164,8 @@
 			return;
 		}
 	spin_unlock_irqrestore(shost->host_lock, flags);
-	mutex_unlock(&shost->scan_mutex);
 	scsi_forget_host(shost);
+	mutex_unlock(&shost->scan_mutex);
 	scsi_proc_host_rm(shost);
 
 	spin_lock_irqsave(shost->host_lock, flags);
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 67cde01..528733b 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -54,15 +54,6 @@
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"aha152x_cs.c 1.54 2000/06/12 21:27:25 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -103,7 +94,7 @@
 {
     scsi_info_t *info;
 
-    DEBUG(0, "aha152x_attach()\n");
+    dev_dbg(&link->dev, "aha152x_attach()\n");
 
     /* Create new SCSI device */
     info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -115,7 +106,6 @@
     link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
     link->io.IOAddrLines = 10;
     link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
@@ -127,7 +117,7 @@
 
 static void aha152x_detach(struct pcmcia_device *link)
 {
-    DEBUG(0, "aha152x_detach(0x%p)\n", link);
+    dev_dbg(&link->dev, "aha152x_detach\n");
 
     aha152x_release_cs(link);
 
@@ -137,9 +127,6 @@
 
 /*====================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int aha152x_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
@@ -164,19 +151,22 @@
 {
     scsi_info_t *info = link->priv;
     struct aha152x_setup s;
-    int last_ret, last_fn;
+    int ret;
     struct Scsi_Host *host;
 
-    DEBUG(0, "aha152x_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "aha152x_config\n");
 
-    last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
-    if (last_ret) {
-	cs_error(link, RequestIO, last_ret);
-	goto failed;
-    }
+    ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
+    if (ret)
+	    goto failed;
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
     
     /* Set configuration options for the aha152x driver */
     memset(&s, 0, sizeof(s));
@@ -194,7 +184,7 @@
     host = aha152x_probe_one(&s);
     if (host == NULL) {
 	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
-	goto cs_failed;
+	goto failed;
     }
 
     sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -203,8 +193,6 @@
 
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     aha152x_release_cs(link);
     return -ENODEV;
diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c
index 06254f4..9140406 100644
--- a/drivers/scsi/pcmcia/fdomain_stub.c
+++ b/drivers/scsi/pcmcia/fdomain_stub.c
@@ -59,16 +59,6 @@
 MODULE_DESCRIPTION("Future Domain PCMCIA SCSI driver");
 MODULE_LICENSE("Dual MPL/GPL");
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"fdomain_cs.c 1.47 2001/10/13 00:08:52 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
-
 /*====================================================================*/
 
 typedef struct scsi_info_t {
@@ -86,7 +76,7 @@
 {
 	scsi_info_t *info;
 
-	DEBUG(0, "fdomain_attach()\n");
+	dev_dbg(&link->dev, "fdomain_attach()\n");
 
 	/* Create new SCSI device */
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -99,7 +89,6 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
@@ -111,7 +100,7 @@
 
 static void fdomain_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "fdomain_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "fdomain_detach\n");
 
 	fdomain_release(link);
 
@@ -120,9 +109,6 @@
 
 /*====================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int fdomain_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
 				cistpl_cftable_entry_t *dflt,
@@ -137,20 +123,22 @@
 static int fdomain_config(struct pcmcia_device *link)
 {
     scsi_info_t *info = link->priv;
-    int last_ret, last_fn;
+    int ret;
     char str[22];
     struct Scsi_Host *host;
 
-    DEBUG(0, "fdomain_config(0x%p)\n", link);
+    dev_dbg(&link->dev, "fdomain_config\n");
 
-    last_ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
-    if (last_ret) {
-	    cs_error(link, RequestIO, last_ret);
+    ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
+    if (ret)
 	    goto failed;
-    }
 
-    CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
 
     /* A bad hack... */
     release_region(link->io.BasePort1, link->io.NumPorts1);
@@ -162,11 +150,11 @@
     host = __fdomain_16x0_detect(&fdomain_driver_template);
     if (!host) {
         printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
-	goto cs_failed;
+	goto failed;
     }
 
     if (scsi_add_host(host, NULL))
-	    goto cs_failed;
+	    goto failed;
     scsi_scan_host(host);
 
     sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -175,8 +163,6 @@
 
     return 0;
 
-cs_failed:
-    cs_error(link, last_fn, last_ret);
 failed:
     fdomain_release(link);
     return -ENODEV;
@@ -188,7 +174,7 @@
 {
 	scsi_info_t *info = link->priv;
 
-	DEBUG(0, "fdomain_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "fdomain_release\n");
 
 	scsi_remove_host(info->host);
 	pcmcia_disable_device(link);
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index e32c344..c2341af 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1564,12 +1564,10 @@
 	link->io.IOAddrLines	 = 10;	/* not used */
 
 	/* Interrupt setup */
-	link->irq.Attributes	 = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1	 = IRQ_LEVEL_ID;
+	link->irq.Attributes	 = IRQ_TYPE_EXCLUSIVE;
 
 	/* Interrupt handler */
 	link->irq.Handler	 = &nspintr;
-	link->irq.Instance       = info;
 	link->irq.Attributes     |= IRQF_SHARED;
 
 	/* General socket configuration */
@@ -1684,10 +1682,10 @@
 			if (cfg_mem->req.Size < 0x1000)
 				cfg_mem->req.Size = 0x1000;
 			cfg_mem->req.AccessSpeed = 0;
-			if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+			if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0)
 				goto next_entry;
 			map.Page = 0; map.CardOffset = mem->win[0].card_addr;
-			if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+			if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
 				goto next_entry;
 
 			cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size);
diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c
index 20c3e5e..f85f094 100644
--- a/drivers/scsi/pcmcia/qlogic_stub.c
+++ b/drivers/scsi/pcmcia/qlogic_stub.c
@@ -62,15 +62,6 @@
 
 static char qlogic_name[] = "qlogic_cs";
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "qlogic_cs.c 1.79-ac 2002/10/26 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
-
 static struct scsi_host_template qlogicfas_driver_template = {
 	.module			= THIS_MODULE,
 	.name			= qlogic_name,
@@ -159,7 +150,7 @@
 {
 	scsi_info_t *info;
 
-	DEBUG(0, "qlogic_attach()\n");
+	dev_dbg(&link->dev, "qlogic_attach()\n");
 
 	/* Create new SCSI device */
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -171,7 +162,6 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.Present = PRESENT_OPTION;
@@ -183,7 +173,7 @@
 
 static void qlogic_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "qlogic_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "qlogic_detach\n");
 
 	qlogic_release(link);
 	kfree(link->priv);
@@ -192,9 +182,6 @@
 
 /*====================================================================*/
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int qlogic_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
 			       cistpl_cftable_entry_t *dflt,
@@ -213,19 +200,22 @@
 static int qlogic_config(struct pcmcia_device * link)
 {
 	scsi_info_t *info = link->priv;
-	int last_ret, last_fn;
+	int ret;
 	struct Scsi_Host *host;
 
-	DEBUG(0, "qlogic_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "qlogic_config\n");
 
-	last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
-	if (last_ret) {
-		cs_error(link, RequestIO, last_ret);
+	ret = pcmcia_loop_config(link, qlogic_config_check, NULL);
+	if (ret)
 		goto failed;
-	}
 
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) {
 		/* set ATAcmd */
@@ -244,7 +234,7 @@
 	
 	if (!host) {
 		printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
-		goto cs_failed;
+		goto failed;
 	}
 
 	sprintf(info->node.dev_name, "scsi%d", host->host_no);
@@ -253,12 +243,9 @@
 
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
-	pcmcia_disable_device(link);
 failed:
+	pcmcia_disable_device(link);
 	return -ENODEV;
-
 }				/* qlogic_config */
 
 /*====================================================================*/
@@ -267,7 +254,7 @@
 {
 	scsi_info_t *info = link->priv;
 
-	DEBUG(0, "qlogic_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "qlogic_release\n");
 
 	scsi_remove_host(info->host);
 
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index b330c11..e7564d8 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -77,17 +77,6 @@
 #include <pcmcia/ds.h>
 #include <pcmcia/ciscode.h>
 
-/* ================================================================== */
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"sym53c500_cs.c 0.9c 2004/10/27 (Bob Tracy)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /* ================================================================== */
 
@@ -525,7 +514,7 @@
 	struct scsi_info_t *info = link->priv;
 	struct Scsi_Host *shost = info->host;
 
-	DEBUG(0, "SYM53C500_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "SYM53C500_release\n");
 
 	/*
 	*  Do this before releasing/freeing resources.
@@ -697,9 +686,6 @@
      .shost_attrs		= SYM53C500_shost_attrs
 };
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static int SYM53C500_config_check(struct pcmcia_device *p_dev,
 				  cistpl_cftable_entry_t *cfg,
 				  cistpl_cftable_entry_t *dflt,
@@ -719,24 +705,27 @@
 SYM53C500_config(struct pcmcia_device *link)
 {
 	struct scsi_info_t *info = link->priv;
-	int last_ret, last_fn;
+	int ret;
 	int irq_level, port_base;
 	struct Scsi_Host *host;
 	struct scsi_host_template *tpnt = &sym53c500_driver_template;
 	struct sym53c500_data *data;
 
-	DEBUG(0, "SYM53C500_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "SYM53C500_config\n");
 
 	info->manf_id = link->manf_id;
 
-	last_ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL);
-	if (last_ret) {
-		cs_error(link, RequestIO, last_ret);
+	ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL);
+	if (ret)
 		goto failed;
-	}
 
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_irq(link, &link->irq);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/*
 	*  That's the trouble with copying liberally from another driver.
@@ -824,8 +813,6 @@
 	printk(KERN_INFO "sym53c500_cs: no SCSI devices found\n");
 	return -ENODEV;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	SYM53C500_release(link);
 	return -ENODEV;
@@ -855,7 +842,7 @@
 static void
 SYM53C500_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "SYM53C500_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "SYM53C500_detach\n");
 
 	SYM53C500_release(link);
 
@@ -868,7 +855,7 @@
 {
 	struct scsi_info_t *info;
 
-	DEBUG(0, "SYM53C500_attach()\n");
+	dev_dbg(&link->dev, "SYM53C500_attach()\n");
 
 	/* Create new SCSI device */
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -880,7 +867,6 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.IOAddrLines = 10;
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 0547a7f..47291bc 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -952,16 +952,6 @@
 	return SCSI_SCAN_LUN_PRESENT;
 }
 
-static inline void scsi_destroy_sdev(struct scsi_device *sdev)
-{
-	scsi_device_set_state(sdev, SDEV_DEL);
-	if (sdev->host->hostt->slave_destroy)
-		sdev->host->hostt->slave_destroy(sdev);
-	transport_destroy_device(&sdev->sdev_gendev);
-	put_device(&sdev->sdev_dev);
-	put_device(&sdev->sdev_gendev);
-}
-
 #ifdef CONFIG_SCSI_LOGGING
 /** 
  * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
@@ -1139,7 +1129,7 @@
 			}
 		}
 	} else
-		scsi_destroy_sdev(sdev);
+		__scsi_remove_device(sdev);
  out:
 	return res;
 }
@@ -1500,7 +1490,7 @@
 		/*
 		 * the sdev we used didn't appear in the report luns scan
 		 */
-		scsi_destroy_sdev(sdev);
+		__scsi_remove_device(sdev);
 	return ret;
 }
 
@@ -1710,7 +1700,7 @@
 	shost_for_each_device(sdev, shost) {
 		if (!scsi_host_scan_allowed(shost) ||
 		    scsi_sysfs_add_sdev(sdev) != 0)
-			scsi_destroy_sdev(sdev);
+			__scsi_remove_device(sdev);
 	}
 }
 
@@ -1943,7 +1933,7 @@
 {
 	BUG_ON(sdev->id != sdev->host->this_id);
 
-	scsi_destroy_sdev(sdev);
+	__scsi_remove_device(sdev);
 }
 EXPORT_SYMBOL(scsi_free_host_dev);
 
diff --git a/drivers/scsi/scsi_sysctl.c b/drivers/scsi/scsi_sysctl.c
index 63a30f5..2b6b93f 100644
--- a/drivers/scsi/scsi_sysctl.c
+++ b/drivers/scsi/scsi_sysctl.c
@@ -13,26 +13,23 @@
 
 
 static ctl_table scsi_table[] = {
-	{ .ctl_name	= DEV_SCSI_LOGGING_LEVEL,
-	  .procname	= "logging_level",
+	{ .procname	= "logging_level",
 	  .data		= &scsi_logging_level,
 	  .maxlen	= sizeof(scsi_logging_level),
 	  .mode		= 0644,
-	  .proc_handler	= &proc_dointvec },
+	  .proc_handler	= proc_dointvec },
 	{ }
 };
 
 static ctl_table scsi_dir_table[] = {
-	{ .ctl_name	= DEV_SCSI,
-	  .procname	= "scsi",
+	{ .procname	= "scsi",
 	  .mode		= 0555,
 	  .child	= scsi_table },
 	{ }
 };
 
 static ctl_table scsi_root_table[] = {
-	{ .ctl_name	= CTL_DEV,
-	  .procname	= "dev",
+	{ .procname	= "dev",
 	  .mode		= 0555,
 	  .child	= scsi_dir_table },
 	{ }
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 5c7eb63..392d8db 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -854,82 +854,73 @@
 	transport_configure_device(&starget->dev);
 	error = device_add(&sdev->sdev_gendev);
 	if (error) {
-		put_device(sdev->sdev_gendev.parent);
 		printk(KERN_INFO "error 1\n");
-		return error;
+		goto out_remove;
 	}
 	error = device_add(&sdev->sdev_dev);
 	if (error) {
 		printk(KERN_INFO "error 2\n");
-		goto clean_device;
+		device_del(&sdev->sdev_gendev);
+		goto out_remove;
 	}
+	transport_add_device(&sdev->sdev_gendev);
+	sdev->is_visible = 1;
 
 	/* create queue files, which may be writable, depending on the host */
 	if (sdev->host->hostt->change_queue_depth)
 		error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
 	else
 		error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth);
-	if (error) {
-		__scsi_remove_device(sdev);
-		goto out;
-	}
+	if (error)
+		goto out_remove;
+
 	if (sdev->host->hostt->change_queue_type)
 		error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw);
 	else
 		error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type);
-	if (error) {
-		__scsi_remove_device(sdev);
-		goto out;
-	}
+	if (error)
+		goto out_remove;
 
 	error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL);
 
 	if (error)
+		/* we're treating error on bsg register as non-fatal,
+		 * so pretend nothing went wrong */
 		sdev_printk(KERN_INFO, sdev,
 			    "Failed to register bsg queue, errno=%d\n", error);
 
-	/* we're treating error on bsg register as non-fatal, so pretend
-	 * nothing went wrong */
-	error = 0;
-
 	/* add additional host specific attributes */
 	if (sdev->host->hostt->sdev_attrs) {
 		for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) {
 			error = device_create_file(&sdev->sdev_gendev,
 					sdev->host->hostt->sdev_attrs[i]);
-			if (error) {
-				__scsi_remove_device(sdev);
-				goto out;
-			}
+			if (error)
+				goto out_remove;
 		}
 	}
 
-	transport_add_device(&sdev->sdev_gendev);
- out:
+	return 0;
+
+ out_remove:
+	__scsi_remove_device(sdev);
 	return error;
 
- clean_device:
-	scsi_device_set_state(sdev, SDEV_CANCEL);
-
-	device_del(&sdev->sdev_gendev);
-	transport_destroy_device(&sdev->sdev_gendev);
-	put_device(&sdev->sdev_dev);
-	put_device(&sdev->sdev_gendev);
-
-	return error;
 }
 
 void __scsi_remove_device(struct scsi_device *sdev)
 {
 	struct device *dev = &sdev->sdev_gendev;
 
-	if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
-		return;
+	if (sdev->is_visible) {
+		if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
+			return;
 
-	bsg_unregister_queue(sdev->request_queue);
-	device_unregister(&sdev->sdev_dev);
-	transport_remove_device(dev);
-	device_del(dev);
+		bsg_unregister_queue(sdev->request_queue);
+		device_unregister(&sdev->sdev_dev);
+		transport_remove_device(dev);
+		device_del(dev);
+	} else
+		put_device(&sdev->sdev_dev);
 	scsi_device_set_state(sdev, SDEV_DEL);
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c
index 88da977..84be621 100644
--- a/drivers/scsi/sd_dif.c
+++ b/drivers/scsi/sd_dif.c
@@ -418,7 +418,7 @@
 		  __func__, virt, phys, be32_to_cpu(sdt->ref_tag),
 		  be16_to_cpu(sdt->app_tag));
 
-	return -EIO;
+	return -EILSEQ;
 }
 
 /*
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e522572..50943ff 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1477,4 +1477,17 @@
 	  If you have enabled the serial port on the bcm63xx CPU
 	  you can make it the console by answering Y to this option.
 
+config SERIAL_GRLIB_GAISLER_APBUART
+	tristate "GRLIB APBUART serial support"
+	depends on OF
+	---help---
+	Add support for the GRLIB APBUART serial port.
+
+config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+	bool "Console on GRLIB APBUART serial port"
+	depends on SERIAL_GRLIB_GAISLER_APBUART=y
+	select SERIAL_CORE_CONSOLE
+	help
+	Support for running a console on the GRLIB APBUART
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d21d5dd..5548fe7 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -81,3 +81,4 @@
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
+obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
new file mode 100644
index 0000000..fe91319
--- /dev/null
+++ b/drivers/serial/apbuart.c
@@ -0,0 +1,710 @@
+/*
+ *  Driver for GRLIB serial ports (APBUART)
+ *
+ *  Based on linux/drivers/serial/amba.c
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2003 Konrad Eisele <eiselekd@web.de>
+ *  Copyright (C) 2006 Daniel Hellstrom <daniel@gaisler.com>, Aeroflex Gaisler AB
+ *  Copyright (C) 2008 Gilead Kutnick <kutnickg@zin-tech.com>
+ *  Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
+ */
+
+#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <asm/irq.h>
+
+#include "apbuart.h"
+
+#define SERIAL_APBUART_MAJOR	TTY_MAJOR
+#define SERIAL_APBUART_MINOR	64
+#define UART_DUMMY_RSR_RX	0x8000	/* for ignore all read */
+
+static void apbuart_tx_chars(struct uart_port *port);
+
+static void apbuart_stop_tx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~UART_CTRL_TI;
+	UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_start_tx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr |= UART_CTRL_TI;
+	UART_PUT_CTRL(port, cr);
+
+	if (UART_GET_STATUS(port) & UART_STATUS_THE)
+		apbuart_tx_chars(port);
+}
+
+static void apbuart_stop_rx(struct uart_port *port)
+{
+	unsigned int cr;
+
+	cr = UART_GET_CTRL(port);
+	cr &= ~(UART_CTRL_RI);
+	UART_PUT_CTRL(port, cr);
+}
+
+static void apbuart_enable_ms(struct uart_port *port)
+{
+	/* No modem status change interrupts for APBUART */
+}
+
+static void apbuart_rx_chars(struct uart_port *port)
+{
+	struct tty_struct *tty = port->state->port.tty;
+	unsigned int status, ch, rsr, flag;
+	unsigned int max_chars = port->fifosize;
+
+	status = UART_GET_STATUS(port);
+
+	while (UART_RX_DATA(status) && (max_chars--)) {
+
+		ch = UART_GET_CHAR(port);
+		flag = TTY_NORMAL;
+
+		port->icount.rx++;
+
+		rsr = UART_GET_STATUS(port) | UART_DUMMY_RSR_RX;
+		UART_PUT_STATUS(port, 0);
+		if (rsr & UART_STATUS_ERR) {
+
+			if (rsr & UART_STATUS_BR) {
+				rsr &= ~(UART_STATUS_FE | UART_STATUS_PE);
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					goto ignore_char;
+			} else if (rsr & UART_STATUS_PE) {
+				port->icount.parity++;
+			} else if (rsr & UART_STATUS_FE) {
+				port->icount.frame++;
+			}
+			if (rsr & UART_STATUS_OE)
+				port->icount.overrun++;
+
+			rsr &= port->read_status_mask;
+
+			if (rsr & UART_STATUS_PE)
+				flag = TTY_PARITY;
+			else if (rsr & UART_STATUS_FE)
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			goto ignore_char;
+
+		uart_insert_char(port, rsr, UART_STATUS_OE, ch, flag);
+
+
+	      ignore_char:
+		status = UART_GET_STATUS(port);
+	}
+
+	tty_flip_buffer_push(tty);
+}
+
+static void apbuart_tx_chars(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	int count;
+
+	if (port->x_char) {
+		UART_PUT_CHAR(port, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		apbuart_stop_tx(port);
+		return;
+	}
+
+	/* amba: fill FIFO */
+	count = port->fifosize >> 1;
+	do {
+		UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	} while (--count > 0);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		apbuart_stop_tx(port);
+}
+
+static irqreturn_t apbuart_int(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned int status;
+
+	spin_lock(&port->lock);
+
+	status = UART_GET_STATUS(port);
+	if (status & UART_STATUS_DR)
+		apbuart_rx_chars(port);
+	if (status & UART_STATUS_THE)
+		apbuart_tx_chars(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int apbuart_tx_empty(struct uart_port *port)
+{
+	unsigned int status = UART_GET_STATUS(port);
+	return status & UART_STATUS_THE ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int apbuart_get_mctrl(struct uart_port *port)
+{
+	/* The GRLIB APBUART handles flow control in hardware */
+	return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void apbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	/* The GRLIB APBUART handles flow control in hardware */
+}
+
+static void apbuart_break_ctl(struct uart_port *port, int break_state)
+{
+	/* We don't support sending break */
+}
+
+static int apbuart_startup(struct uart_port *port)
+{
+	int retval;
+	unsigned int cr;
+
+	/* Allocate the IRQ */
+	retval = request_irq(port->irq, apbuart_int, 0, "apbuart", port);
+	if (retval)
+		return retval;
+
+	/* Finally, enable interrupts */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port,
+		      cr | UART_CTRL_RE | UART_CTRL_TE |
+		      UART_CTRL_RI | UART_CTRL_TI);
+
+	return 0;
+}
+
+static void apbuart_shutdown(struct uart_port *port)
+{
+	unsigned int cr;
+
+	/* disable all interrupts, disable the port */
+	cr = UART_GET_CTRL(port);
+	UART_PUT_CTRL(port,
+		      cr & ~(UART_CTRL_RE | UART_CTRL_TE |
+			     UART_CTRL_RI | UART_CTRL_TI));
+
+	/* Free the interrupt */
+	free_irq(port->irq, port);
+}
+
+static void apbuart_set_termios(struct uart_port *port,
+				struct ktermios *termios, struct ktermios *old)
+{
+	unsigned int cr;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	/* Ask the core to calculate the divisor for us. */
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	if (baud == 0)
+		panic("invalid baudrate %i\n", port->uartclk / 16);
+
+	/* uart_get_divisor calc a *16 uart freq, apbuart is *8 */
+	quot = (uart_get_divisor(port, baud)) * 2;
+	cr = UART_GET_CTRL(port);
+	cr &= ~(UART_CTRL_PE | UART_CTRL_PS);
+
+	if (termios->c_cflag & PARENB) {
+		cr |= UART_CTRL_PE;
+		if ((termios->c_cflag & PARODD))
+			cr |= UART_CTRL_PS;
+	}
+
+	/* Enable flow control. */
+	if (termios->c_cflag & CRTSCTS)
+		cr |= UART_CTRL_FL;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Update the per-port timeout. */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	port->read_status_mask = UART_STATUS_OE;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+	/* Characters to ignore */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART_STATUS_FE | UART_STATUS_PE;
+
+	/* Ignore all characters if CREAD is not set. */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+	/* Set baud rate */
+	quot -= 1;
+	UART_PUT_SCAL(port, quot);
+	UART_PUT_CTRL(port, cr);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *apbuart_type(struct uart_port *port)
+{
+	return port->type == PORT_APBUART ? "GRLIB/APBUART" : NULL;
+}
+
+static void apbuart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, 0x100);
+}
+
+static int apbuart_request_port(struct uart_port *port)
+{
+	return request_mem_region(port->mapbase, 0x100, "grlib-apbuart")
+	    != NULL ? 0 : -EBUSY;
+	return 0;
+}
+
+/* Configure/autoconfigure the port */
+static void apbuart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_APBUART;
+		apbuart_request_port(port);
+	}
+}
+
+/* Verify the new serial_struct (for TIOCSSERIAL) */
+static int apbuart_verify_port(struct uart_port *port,
+			       struct serial_struct *ser)
+{
+	int ret = 0;
+	if (ser->type != PORT_UNKNOWN && ser->type != PORT_APBUART)
+		ret = -EINVAL;
+	if (ser->irq < 0 || ser->irq >= NR_IRQS)
+		ret = -EINVAL;
+	if (ser->baud_base < 9600)
+		ret = -EINVAL;
+	return ret;
+}
+
+static struct uart_ops grlib_apbuart_ops = {
+	.tx_empty = apbuart_tx_empty,
+	.set_mctrl = apbuart_set_mctrl,
+	.get_mctrl = apbuart_get_mctrl,
+	.stop_tx = apbuart_stop_tx,
+	.start_tx = apbuart_start_tx,
+	.stop_rx = apbuart_stop_rx,
+	.enable_ms = apbuart_enable_ms,
+	.break_ctl = apbuart_break_ctl,
+	.startup = apbuart_startup,
+	.shutdown = apbuart_shutdown,
+	.set_termios = apbuart_set_termios,
+	.type = apbuart_type,
+	.release_port = apbuart_release_port,
+	.request_port = apbuart_request_port,
+	.config_port = apbuart_config_port,
+	.verify_port = apbuart_verify_port,
+};
+
+static struct uart_port grlib_apbuart_ports[UART_NR];
+static struct device_node *grlib_apbuart_nodes[UART_NR];
+
+static int apbuart_scan_fifo_size(struct uart_port *port, int portnumber)
+{
+	int ctrl, loop = 0;
+	int status;
+	int fifosize;
+	unsigned long flags;
+
+	ctrl = UART_GET_CTRL(port);
+
+	/*
+	 * Enable the transceiver and wait for it to be ready to send data.
+	 * Clear interrupts so that this process will not be externally
+	 * interrupted in the middle (which can cause the transceiver to
+	 * drain prematurely).
+	 */
+
+	local_irq_save(flags);
+
+	UART_PUT_CTRL(port, ctrl | UART_CTRL_TE);
+
+	while (!UART_TX_READY(UART_GET_STATUS(port)))
+		loop++;
+
+	/*
+	 * Disable the transceiver so data isn't actually sent during the
+	 * actual test.
+	 */
+
+	UART_PUT_CTRL(port, ctrl & ~(UART_CTRL_TE));
+
+	fifosize = 1;
+	UART_PUT_CHAR(port, 0);
+
+	/*
+	 * So long as transmitting a character increments the tranceivier FIFO
+	 * length the FIFO must be at least that big. These bytes will
+	 * automatically drain off of the FIFO.
+	 */
+
+	status = UART_GET_STATUS(port);
+	while (((status >> 20) & 0x3F) == fifosize) {
+		fifosize++;
+		UART_PUT_CHAR(port, 0);
+		status = UART_GET_STATUS(port);
+	}
+
+	fifosize--;
+
+	UART_PUT_CTRL(port, ctrl);
+	local_irq_restore(flags);
+
+	if (fifosize == 0)
+		fifosize = 1;
+
+	return fifosize;
+}
+
+static void apbuart_flush_fifo(struct uart_port *port)
+{
+	int i;
+
+	for (i = 0; i < port->fifosize; i++)
+		UART_GET_CHAR(port);
+}
+
+
+/* ======================================================================== */
+/* Console driver, if enabled                                               */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
+
+static void apbuart_console_putchar(struct uart_port *port, int ch)
+{
+	unsigned int status;
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CHAR(port, ch);
+}
+
+static void
+apbuart_console_write(struct console *co, const char *s, unsigned int count)
+{
+	struct uart_port *port = &grlib_apbuart_ports[co->index];
+	unsigned int status, old_cr, new_cr;
+
+	/* First save the CR then disable the interrupts */
+	old_cr = UART_GET_CTRL(port);
+	new_cr = old_cr & ~(UART_CTRL_RI | UART_CTRL_TI);
+	UART_PUT_CTRL(port, new_cr);
+
+	uart_console_write(port, s, count, apbuart_console_putchar);
+
+	/*
+	 *      Finally, wait for transmitter to become empty
+	 *      and restore the TCR
+	 */
+	do {
+		status = UART_GET_STATUS(port);
+	} while (!UART_TX_READY(status));
+	UART_PUT_CTRL(port, old_cr);
+}
+
+static void __init
+apbuart_console_get_options(struct uart_port *port, int *baud,
+			    int *parity, int *bits)
+{
+	if (UART_GET_CTRL(port) & (UART_CTRL_RE | UART_CTRL_TE)) {
+
+		unsigned int quot, status;
+		status = UART_GET_STATUS(port);
+
+		*parity = 'n';
+		if (status & UART_CTRL_PE) {
+			if ((status & UART_CTRL_PS) == 0)
+				*parity = 'e';
+			else
+				*parity = 'o';
+		}
+
+		*bits = 8;
+		quot = UART_GET_SCAL(port) / 8;
+		*baud = port->uartclk / (16 * (quot + 1));
+	}
+}
+
+static int __init apbuart_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 38400;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	pr_debug("apbuart_console_setup co=%p, co->index=%i, options=%s\n",
+		 co, co->index, options);
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (co->index >= grlib_apbuart_port_nr)
+		co->index = 0;
+
+	port = &grlib_apbuart_ports[co->index];
+
+	spin_lock_init(&port->lock);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		apbuart_console_get_options(port, &baud, &parity, &bits);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver grlib_apbuart_driver;
+
+static struct console grlib_apbuart_console = {
+	.name = "ttyS",
+	.write = apbuart_console_write,
+	.device = uart_console_device,
+	.setup = apbuart_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &grlib_apbuart_driver,
+};
+
+
+static void grlib_apbuart_configure(void);
+
+static int __init apbuart_console_init(void)
+{
+	grlib_apbuart_configure();
+	register_console(&grlib_apbuart_console);
+	return 0;
+}
+
+console_initcall(apbuart_console_init);
+
+#define APBUART_CONSOLE	(&grlib_apbuart_console)
+#else
+#define APBUART_CONSOLE	NULL
+#endif
+
+static struct uart_driver grlib_apbuart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "serial",
+	.dev_name = "ttyS",
+	.major = SERIAL_APBUART_MAJOR,
+	.minor = SERIAL_APBUART_MINOR,
+	.nr = UART_NR,
+	.cons = APBUART_CONSOLE,
+};
+
+
+/* ======================================================================== */
+/* OF Platform Driver                                                       */
+/* ======================================================================== */
+
+static int __devinit apbuart_probe(struct of_device *op,
+				   const struct of_device_id *match)
+{
+	int i = -1;
+	struct uart_port *port = NULL;
+
+	i = 0;
+	for (i = 0; i < grlib_apbuart_port_nr; i++) {
+		if (op->node == grlib_apbuart_nodes[i])
+			break;
+	}
+
+	port = &grlib_apbuart_ports[i];
+	port->dev = &op->dev;
+
+	uart_add_one_port(&grlib_apbuart_driver, (struct uart_port *) port);
+
+	apbuart_flush_fifo((struct uart_port *) port);
+
+	printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
+	       (unsigned long long) port->mapbase, port->irq);
+	return 0;
+
+}
+
+static struct of_device_id __initdata apbuart_match[] = {
+	{
+	 .name = "GAISLER_APBUART",
+	 },
+	{},
+};
+
+static struct of_platform_driver grlib_apbuart_of_driver = {
+	.match_table = apbuart_match,
+	.probe = apbuart_probe,
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = "grlib-apbuart",
+		   },
+};
+
+
+static void grlib_apbuart_configure(void)
+{
+	static int enum_done;
+	struct device_node *np, *rp;
+	struct uart_port *port = NULL;
+	const u32 *prop;
+	int freq_khz;
+	int v = 0, d = 0;
+	unsigned int addr;
+	int irq, line;
+	struct amba_prom_registers *regs;
+
+	if (enum_done)
+		return;
+
+	/* Get bus frequency */
+	rp = of_find_node_by_path("/");
+	rp = of_get_next_child(rp, NULL);
+	prop = of_get_property(rp, "clock-frequency", NULL);
+	freq_khz = *prop;
+
+	line = 0;
+	for_each_matching_node(np, apbuart_match) {
+
+		int *vendor = (int *) of_get_property(np, "vendor", NULL);
+		int *device = (int *) of_get_property(np, "device", NULL);
+		int *irqs = (int *) of_get_property(np, "interrupts", NULL);
+		regs = (struct amba_prom_registers *)
+		    of_get_property(np, "reg", NULL);
+
+		if (vendor)
+			v = *vendor;
+		if (device)
+			d = *device;
+
+		if (!irqs || !regs)
+			return;
+
+		grlib_apbuart_nodes[line] = np;
+
+		addr = regs->phys_addr;
+		irq = *irqs;
+
+		port = &grlib_apbuart_ports[line];
+
+		port->mapbase = addr;
+		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
+		port->irq = irq;
+		port->iotype = UPIO_MEM;
+		port->ops = &grlib_apbuart_ops;
+		port->flags = UPF_BOOT_AUTOCONF;
+		port->line = line;
+		port->uartclk = freq_khz * 1000;
+		port->fifosize = apbuart_scan_fifo_size((struct uart_port *) port, line);
+		line++;
+
+		/* We support maximum UART_NR uarts ... */
+		if (line == UART_NR)
+			break;
+
+	}
+
+	enum_done = 1;
+
+	grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+}
+
+static int __init grlib_apbuart_init(void)
+{
+	int ret;
+
+	/* Find all APBUARTS in device the tree and initialize their ports */
+	grlib_apbuart_configure();
+
+	printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
+
+	ret = uart_register_driver(&grlib_apbuart_driver);
+
+	if (ret) {
+		printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
+		       __FILE__, ret);
+		return ret;
+	}
+
+	ret = of_register_platform_driver(&grlib_apbuart_of_driver);
+	if (ret) {
+		printk(KERN_ERR
+		       "%s: of_register_platform_driver failed (%i)\n",
+		       __FILE__, ret);
+		uart_unregister_driver(&grlib_apbuart_driver);
+		return ret;
+	}
+
+	return ret;
+}
+
+static void __exit grlib_apbuart_exit(void)
+{
+	int i;
+
+	for (i = 0; i < grlib_apbuart_port_nr; i++)
+		uart_remove_one_port(&grlib_apbuart_driver,
+				     &grlib_apbuart_ports[i]);
+
+	uart_unregister_driver(&grlib_apbuart_driver);
+	of_unregister_platform_driver(&grlib_apbuart_of_driver);
+}
+
+module_init(grlib_apbuart_init);
+module_exit(grlib_apbuart_exit);
+
+MODULE_AUTHOR("Aeroflex Gaisler AB");
+MODULE_DESCRIPTION("GRLIB APBUART serial driver");
+MODULE_VERSION("2.1");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/apbuart.h b/drivers/serial/apbuart.h
new file mode 100644
index 0000000..5faf87c
--- /dev/null
+++ b/drivers/serial/apbuart.h
@@ -0,0 +1,64 @@
+#ifndef __GRLIB_APBUART_H__
+#define __GRLIB_APBUART_H__
+
+#include <asm/io.h>
+
+#define UART_NR		8
+static int grlib_apbuart_port_nr;
+
+struct grlib_apbuart_regs_map {
+	u32 data;
+	u32 status;
+	u32 ctrl;
+	u32 scaler;
+};
+
+struct amba_prom_registers {
+	unsigned int phys_addr;
+	unsigned int reg_size;
+};
+
+/*
+ *  The following defines the bits in the APBUART Status Registers.
+ */
+#define UART_STATUS_DR   0x00000001	/* Data Ready */
+#define UART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
+#define UART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
+#define UART_STATUS_BR   0x00000008	/* Break Error */
+#define UART_STATUS_OE   0x00000010	/* RX Overrun Error */
+#define UART_STATUS_PE   0x00000020	/* RX Parity Error */
+#define UART_STATUS_FE   0x00000040	/* RX Framing Error */
+#define UART_STATUS_ERR  0x00000078	/* Error Mask */
+
+/*
+ *  The following defines the bits in the APBUART Ctrl Registers.
+ */
+#define UART_CTRL_RE     0x00000001	/* Receiver enable */
+#define UART_CTRL_TE     0x00000002	/* Transmitter enable */
+#define UART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
+#define UART_CTRL_TI     0x00000008	/* Transmitter irq */
+#define UART_CTRL_PS     0x00000010	/* Parity select */
+#define UART_CTRL_PE     0x00000020	/* Parity enable */
+#define UART_CTRL_FL     0x00000040	/* Flow control enable */
+#define UART_CTRL_LB     0x00000080	/* Loopback enable */
+
+#define APBBASE(port) ((struct grlib_apbuart_regs_map *)((port)->membase))
+
+#define APBBASE_DATA_P(port)	(&(APBBASE(port)->data))
+#define APBBASE_STATUS_P(port)	(&(APBBASE(port)->status))
+#define APBBASE_CTRL_P(port)	(&(APBBASE(port)->ctrl))
+#define APBBASE_SCALAR_P(port)	(&(APBBASE(port)->scaler))
+
+#define UART_GET_CHAR(port)	(__raw_readl(APBBASE_DATA_P(port)))
+#define UART_PUT_CHAR(port, v)	(__raw_writel(v, APBBASE_DATA_P(port)))
+#define UART_GET_STATUS(port)	(__raw_readl(APBBASE_STATUS_P(port)))
+#define UART_PUT_STATUS(port, v)(__raw_writel(v, APBBASE_STATUS_P(port)))
+#define UART_GET_CTRL(port)	(__raw_readl(APBBASE_CTRL_P(port)))
+#define UART_PUT_CTRL(port, v)	(__raw_writel(v, APBBASE_CTRL_P(port)))
+#define UART_GET_SCAL(port)	(__raw_readl(APBBASE_SCALAR_P(port)))
+#define UART_PUT_SCAL(port, v)	(__raw_writel(v, APBBASE_SCALAR_P(port)))
+
+#define UART_RX_DATA(s)		(((s) & UART_STATUS_DR) != 0)
+#define UART_TX_READY(s)	(((s) & UART_STATUS_THE) != 0)
+
+#endif /* __GRLIB_APBUART_H__ */
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
index beddaa6..37ad0c4 100644
--- a/drivers/serial/bcm63xx_uart.c
+++ b/drivers/serial/bcm63xx_uart.c
@@ -242,7 +242,7 @@
 	 * higher than fifo size anyway since we're much faster than
 	 * serial port */
 	max_count = 32;
-	tty = port->info->port.tty;
+	tty = port->state->port.tty;
 	do {
 		unsigned int iestat, c, cstat;
 		char flag;
@@ -318,7 +318,7 @@
 		return;
 	}
 
-	xmit = &port->info->xmit;
+	xmit = &port->state->xmit;
 	if (uart_circ_empty(xmit))
 		goto txq_empty;
 
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index c99f082..73f089d 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2410 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index 6e057d8..ce75e28 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c
index 69ff5d3..094cc39 100644
--- a/drivers/serial/s3c2440.c
+++ b/drivers/serial/s3c2440.c
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c
index 26c49e1..fad6083 100644
--- a/drivers/serial/s3c24a0.c
+++ b/drivers/serial/s3c24a0.c
@@ -6,7 +6,7 @@
  *
  * Author: Sandeep Patil <sandeep.patil@azingo.com>
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d..52e3df1 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -2,7 +2,7 @@
  *
  * Driver core for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index d3fe315..1fb2234 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -2,7 +2,7 @@
  *
  * Driver for Samsung SoC onboard UARTs.
  *
- * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 7c7914f..fc413f0 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -54,14 +54,6 @@
 
 #include "8250.h"
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
 
 /*====================================================================*/
 
@@ -121,24 +113,20 @@
 static int quirk_post_ibm(struct pcmcia_device *link)
 {
 	conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
-	int last_ret, last_fn;
+	int ret;
 
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
+
 	reg.Action = CS_WRITE;
 	reg.Value = reg.Value | 1;
-	last_ret = pcmcia_access_configuration_register(link, &reg);
-	if (last_ret) {
-		last_fn = AccessConfigurationRegister;
-		goto cs_failed;
-	}
+	ret = pcmcia_access_configuration_register(link, &reg);
+	if (ret)
+		goto failed;
 	return 0;
 
- cs_failed:
-	cs_error(link, last_fn, last_ret);
+ failed:
 	return -ENODEV;
 }
 
@@ -283,7 +271,7 @@
 	struct serial_info *info = link->priv;
 	int i;
 
-	DEBUG(0, "serial_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_release\n");
 
 	/*
 	 * Recheck to see if the device is still configured.
@@ -334,7 +322,7 @@
 {
 	struct serial_info *info;
 
-	DEBUG(0, "serial_attach()\n");
+	dev_dbg(&link->dev, "serial_attach()\n");
 
 	/* Create new serial device */
 	info = kzalloc(sizeof (*info), GFP_KERNEL);
@@ -346,7 +334,6 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	link->io.NumPorts1 = 8;
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -370,7 +357,7 @@
 {
 	struct serial_info *info = link->priv;
 
-	DEBUG(0, "serial_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "serial_detach\n");
 
 	/*
 	 * Ensure any outstanding scheduled tasks are completed.
@@ -399,7 +386,7 @@
 	port.irq = irq;
 	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
 	port.uartclk = 1843200;
-	port.dev = &handle_to_dev(handle);
+	port.dev = &handle->dev;
 	if (buggy_uart)
 		port.flags |= UPF_BUGGY_UART;
 
@@ -426,21 +413,6 @@
 
 /*====================================================================*/
 
-static int
-first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
-{
-	int i;
-	i = pcmcia_get_first_tuple(handle, tuple);
-	if (i != 0)
-		return i;
-	i = pcmcia_get_tuple_data(handle, tuple);
-	if (i != 0)
-		return i;
-	return pcmcia_parse_tuple(tuple, parse);
-}
-
-/*====================================================================*/
-
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
@@ -522,15 +494,13 @@
 
 	printk(KERN_NOTICE
 	       "serial_cs: no usable port range found, giving up\n");
-	cs_error(link, RequestIO, i);
 	return -1;
 
 found_port:
 	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
-		cs_error(link, RequestIRQ, i);
+	if (i != 0)
 		link->irq.AssignedIRQ = 0;
-	}
+
 	if (info->multi && (info->manfid == MANFID_3COM))
 		link->conf.ConfigIndex &= ~(0x08);
 
@@ -541,10 +511,8 @@
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -1;
-	}
 	return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
 }
 
@@ -613,7 +581,6 @@
 		/* FIXME: comment does not fit, error handling does not fit */
 		printk(KERN_NOTICE
 		       "serial_cs: no usable port range found, giving up\n");
-		cs_error(link, RequestIRQ, i);
 		link->irq.AssignedIRQ = 0;
 	}
 
@@ -624,10 +591,8 @@
 		info->quirk->config(link);
 
 	i = pcmcia_request_configuration(link, &link->conf);
-	if (i != 0) {
-		cs_error(link, RequestConfiguration, i);
+	if (i != 0)
 		return -ENODEV;
-	}
 
 	/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
 	 * 8 registers are for the UART, the others are extra registers.
@@ -665,6 +630,25 @@
 	return 0;
 }
 
+static int serial_check_for_multi(struct pcmcia_device *p_dev,
+				  cistpl_cftable_entry_t *cf,
+				  cistpl_cftable_entry_t *dflt,
+				  unsigned int vcc,
+				  void *priv_data)
+{
+	struct serial_info *info = p_dev->priv;
+
+	if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+		info->multi = cf->io.win[0].len >> 3;
+
+	if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+		(cf->io.win[1].len == 8))
+		info->multi = 2;
+
+	return 0; /* break */
+}
+
+
 /*======================================================================
 
     serial_config() is scheduled to run after a CARD_INSERTION event
@@ -676,46 +660,14 @@
 static int serial_config(struct pcmcia_device * link)
 {
 	struct serial_info *info = link->priv;
-	struct serial_cfg_mem *cfg_mem;
-	tuple_t *tuple;
-	u_char *buf;
-	cisparse_t *parse;
-	cistpl_cftable_entry_t *cf;
-	int i, last_ret, last_fn;
+	int i;
 
-	DEBUG(0, "serial_config(0x%p)\n", link);
-
-	cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
-	if (!cfg_mem)
-		goto failed;
-
-	tuple = &cfg_mem->tuple;
-	parse = &cfg_mem->parse;
-	cf = &parse->cftable_entry;
-	buf = cfg_mem->buf;
-
-	tuple->TupleData = (cisdata_t *) buf;
-	tuple->TupleOffset = 0;
-	tuple->TupleDataMax = 255;
-	tuple->Attributes = 0;
-
-	/* Get configuration register information */
-	tuple->DesiredTuple = CISTPL_CONFIG;
-	last_ret = first_tuple(link, tuple, parse);
-	if (last_ret != 0) {
-		last_fn = ParseTuple;
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse->config.base;
-	link->conf.Present = parse->config.rmask[0];
+	dev_dbg(&link->dev, "serial_config\n");
 
 	/* Is this a compliant multifunction card? */
-	tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
-	tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-	info->multi = (first_tuple(link, tuple, parse) == 0);
+	info->multi = (link->socket->functions > 1);
 
 	/* Is this a multiport card? */
-	tuple->DesiredTuple = CISTPL_MANFID;
 	info->manfid = link->manf_id;
 	info->prodid = link->card_id;
 
@@ -730,20 +682,11 @@
 
 	/* Another check for dual-serial cards: look for either serial or
 	   multifunction cards that ask for appropriate IO port ranges */
-	tuple->DesiredTuple = CISTPL_FUNCID;
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
-	     (link->func_id == CISTPL_FUNCID_SERIAL))) {
-		tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-		if (first_tuple(link, tuple, parse) == 0) {
-			if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
-				info->multi = cf->io.win[0].len >> 3;
-			if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
-			    (cf->io.win[1].len == 8))
-				info->multi = 2;
-		}
-	}
+	     (link->func_id == CISTPL_FUNCID_SERIAL)))
+		pcmcia_loop_config(link, serial_check_for_multi, info);
 
 	/*
 	 * Apply any multi-port quirk.
@@ -768,14 +711,10 @@
 			goto failed;
 
 	link->dev_node = &info->node[0];
-	kfree(cfg_mem);
 	return 0;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
 failed:
 	serial_remove(link);
-	kfree(cfg_mem);
 	return -ENODEV;
 }
 
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index a2d4a19..ed7d958 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -53,20 +53,21 @@
 EXPORT_SYMBOL(sunserial_unregister_minors);
 
 int sunserial_console_match(struct console *con, struct device_node *dp,
-			    struct uart_driver *drv, int line)
+			    struct uart_driver *drv, int line, bool ignore_line)
 {
-	int off;
-
 	if (!con || of_console_device != dp)
 		return 0;
 
-	off = 0;
-	if (of_console_options &&
-	    *of_console_options == 'b')
-		off = 1;
+	if (!ignore_line) {
+		int off = 0;
 
-	if ((line & 1) != off)
-		return 0;
+		if (of_console_options &&
+		    *of_console_options == 'b')
+			off = 1;
+
+		if ((line & 1) != off)
+			return 0;
+	}
 
 	con->index = line;
 	drv->cons = con;
@@ -76,23 +77,24 @@
 }
 EXPORT_SYMBOL(sunserial_console_match);
 
-void
-sunserial_console_termios(struct console *con)
+void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
 {
-	struct device_node *dp;
-	const char *od, *mode, *s;
+	const char *mode, *s;
 	char mode_prop[] = "ttyX-mode";
 	int baud, bits, stop, cflag;
 	char parity;
 
-	dp = of_find_node_by_path("/options");
-	od = of_get_property(dp, "output-device", NULL);
-	if (!strcmp(od, "rsc")) {
-		mode = of_get_property(of_console_device,
+	if (!strcmp(uart_dp->name, "rsc") ||
+	    !strcmp(uart_dp->name, "rsc-console") ||
+	    !strcmp(uart_dp->name, "rsc-control")) {
+		mode = of_get_property(uart_dp,
 				       "ssp-console-modes", NULL);
 		if (!mode)
 			mode = "115200,8,n,1,-";
+	} else if (!strcmp(uart_dp->name, "lom-console")) {
+		mode = "9600,8,n,1,-";
 	} else {
+		struct device_node *dp;
 		char c;
 
 		c = 'a';
@@ -101,6 +103,7 @@
 
 		mode_prop[3] = c;
 
+		dp = of_find_node_by_path("/options");
 		mode = of_get_property(dp, mode_prop, NULL);
 		if (!mode)
 			mode = "9600,8,n,1,-";
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
index 042668a..db20579 100644
--- a/drivers/serial/suncore.h
+++ b/drivers/serial/suncore.h
@@ -26,7 +26,8 @@
 extern void sunserial_unregister_minors(struct uart_driver *, int);
 
 extern int sunserial_console_match(struct console *, struct device_node *,
-				   struct uart_driver *, int);
-extern void sunserial_console_termios(struct console *);
+				   struct uart_driver *, int, bool);
+extern void sunserial_console_termios(struct console *,
+				      struct device_node *);
 
 #endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index d548652..d14cca7 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -566,7 +566,7 @@
 		goto out_free_con_read_page;
 
 	sunserial_console_match(&sunhv_console, op->node,
-				&sunhv_reg, port->line);
+				&sunhv_reg, port->line, false);
 
 	err = uart_add_one_port(&sunhv_reg, port);
 	if (err)
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index d1ad341..d514e28 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -883,7 +883,7 @@
 	printk("Console: ttyS%d (SAB82532)\n",
 	       (sunsab_reg.minor - 64) + con->index);
 
-	sunserial_console_termios(con);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
 
 	switch (con->cflag & CBAUD) {
 	case B150: baud = 150; break;
@@ -1027,10 +1027,12 @@
 		goto out1;
 
 	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
-				&sunsab_reg, up[0].port.line);
+				&sunsab_reg, up[0].port.line,
+				false);
 
 	sunserial_console_match(SUNSAB_CONSOLE(), op->node,
-				&sunsab_reg, up[1].port.line);
+				&sunsab_reg, up[1].port.line,
+				false);
 
 	err = uart_add_one_port(&sunsab_reg, &up[0].port);
 	if (err)
@@ -1116,7 +1118,6 @@
 		if (!sunsab_ports)
 			return -ENOMEM;
 
-		sunsab_reg.cons = SUNSAB_CONSOLE();
 		err = sunserial_register_minors(&sunsab_reg, num_channels);
 		if (err) {
 			kfree(sunsab_ports);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 68d262b..170d3d6 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1329,11 +1329,9 @@
  */
 static int __init sunsu_console_setup(struct console *co, char *options)
 {
+	static struct ktermios dummy;
+	struct ktermios termios;
 	struct uart_port *port;
-	int baud = 9600;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
 
 	printk("Console: ttyS%d (SU)\n",
 	       (sunsu_reg.minor - 64) + co->index);
@@ -1352,10 +1350,15 @@
 	 */
 	spin_lock_init(&port->lock);
 
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	/* Get firmware console settings.  */
+	sunserial_console_termios(co, to_of_device(port->dev)->node);
 
-	return uart_set_options(port, co, baud, parity, bits, flow);
+	memset(&termios, 0, sizeof(struct ktermios));
+	termios.c_cflag = co->cflag;
+	port->mctrl |= TIOCM_DTR;
+	port->ops->set_termios(port, &termios, &dummy);
+
+	return 0;
 }
 
 static struct console sunsu_console = {
@@ -1409,6 +1412,7 @@
 	struct uart_sunsu_port *up;
 	struct resource *rp;
 	enum su_type type;
+	bool ignore_line;
 	int err;
 
 	type = su_get_type(dp);
@@ -1467,8 +1471,14 @@
 
 	up->port.ops = &sunsu_pops;
 
+	ignore_line = false;
+	if (!strcmp(dp->name, "rsc-console") ||
+	    !strcmp(dp->name, "lom-console"))
+		ignore_line = true;
+
 	sunserial_console_match(SUNSU_CONSOLE(), dp,
-				&sunsu_reg, up->port.line);
+				&sunsu_reg, up->port.line,
+				ignore_line);
 	err = uart_add_one_port(&sunsu_reg, &up->port);
 	if (err)
 		goto out_unmap;
@@ -1517,6 +1527,10 @@
 		.name = "serial",
 		.compatible = "su",
 	},
+	{
+		.type = "serial",
+		.compatible = "su",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, su_match);
@@ -1548,6 +1562,12 @@
 				num_uart++;
 		}
 	}
+	for_each_node_by_type(dp, "serial") {
+		if (of_device_is_compatible(dp, "su")) {
+			if (su_get_type(dp) == SU_PORT_PORT)
+				num_uart++;
+		}
+	}
 
 	if (num_uart) {
 		err = sunserial_register_minors(&sunsu_reg, num_uart);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index ef693ae..2c7a66a 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1180,7 +1180,7 @@
 	       (sunzilog_reg.minor - 64) + con->index, con->index);
 
 	/* Get firmware console settings.  */
-	sunserial_console_termios(con);
+	sunserial_console_termios(con, to_of_device(up->port.dev)->node);
 
 	/* Firmware console speed is limited to 150-->38400 baud so
 	 * this hackish cflag thing is OK.
@@ -1416,7 +1416,8 @@
 
 	if (!keyboard_mouse) {
 		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
-					    &sunzilog_reg, up[0].port.line))
+					    &sunzilog_reg, up[0].port.line,
+					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
 		err = uart_add_one_port(&sunzilog_reg, &up[0].port);
 		if (err) {
@@ -1425,7 +1426,8 @@
 			return err;
 		}
 		if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
-					    &sunzilog_reg, up[1].port.line))
+					    &sunzilog_reg, up[1].port.line,
+					    false))
 			up->flags |= SUNZILOG_FLAG_IS_CONS;
 		err = uart_add_one_port(&sunzilog_reg, &up[1].port);
 		if (err) {
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index ba1a872..bf5f95a 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -35,8 +35,8 @@
 
 #include <linux/spi/spi.h>
 
-#include <mach/dma.h>
-#include <mach/clock.h>
+#include <plat/dma.h>
+#include <plat/clock.h>
 
 
 #define OMAP2_MCSPI_MAX_FREQ		48000000
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index e75ba9b..6c3a855 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -51,8 +51,8 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
-#include <mach/omap730.h>	/* OMAP730_IO_CONF registers */
+#include <plat/mux.h>
+#include <plat/omap7xx.h>	/* OMAP7XX_IO_CONF registers */
 
 
 /* FIXME address is now a platform device resource,
@@ -504,7 +504,7 @@
 	}
 	clk_enable(uwire->ck);
 
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		uwire_idx_shift = 1;
 	else
 		uwire_idx_shift = 2;
@@ -573,8 +573,8 @@
 	}
 	if (machine_is_omap_perseus2()) {
 		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
-		int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000;
-		omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9);
+		int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000;
+		omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9);
 	}
 
 	return platform_driver_probe(&uwire_driver, uwire_probe);
diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
index 96057de..19f7562 100644
--- a/drivers/spi/spi_txx9.c
+++ b/drivers/spi/spi_txx9.c
@@ -29,6 +29,8 @@
 
 
 #define SPI_FIFO_SIZE 4
+#define SPI_MAX_DIVIDER 0xff	/* Max. value for SPCR1.SER */
+#define SPI_MIN_DIVIDER 1	/* Min. value for SPCR1.SER */
 
 #define TXx9_SPMCR		0x00
 #define TXx9_SPCR0		0x04
@@ -193,11 +195,8 @@
 
 		if (prev_speed_hz != speed_hz
 				|| prev_bits_per_word != bits_per_word) {
-			u32 n = (c->baseclk + speed_hz - 1) / speed_hz;
-			if (n < 1)
-				n = 1;
-			else if (n > 0xff)
-				n = 0xff;
+			int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1;
+			n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER);
 			/* enter config mode */
 			txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR,
 					TXx9_SPMCR);
@@ -370,8 +369,8 @@
 		goto exit;
 	}
 	c->baseclk = clk_get_rate(c->clk);
-	c->min_speed_hz = (c->baseclk + 0xff - 1) / 0xff;
-	c->max_speed_hz = c->baseclk;
+	c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
+	c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!res)
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 538c570..f1dcd79 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -551,13 +551,13 @@
 	might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
 
 	/* Enable interrupts for this device. */
-	if (bus->host_pci &&
-	    ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
+	if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
 		u32 coremask;
 
 		/* Calculate the "coremask" for the device. */
 		coremask = (1 << dev->core_index);
 
+		SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
 		err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
 		if (err)
 			goto out;
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 579b114..5681ebe 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -140,6 +140,19 @@
 		put_device(dev->dev);
 }
 
+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
+{
+	if (drv)
+		get_driver(&drv->drv);
+	return drv;
+}
+
+static inline void ssb_driver_put(struct ssb_driver *drv)
+{
+	if (drv)
+		put_driver(&drv->drv);
+}
+
 static int ssb_device_resume(struct device *dev)
 {
 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -210,90 +223,81 @@
 EXPORT_SYMBOL(ssb_bus_suspend);
 
 #ifdef CONFIG_SSB_SPROM
-int ssb_devices_freeze(struct ssb_bus *bus)
+/** ssb_devices_freeze - Freeze all devices on the bus.
+ *
+ * After freezing no device driver will be handling a device
+ * on this bus anymore. ssb_devices_thaw() must be called after
+ * a successful freeze to reactivate the devices.
+ *
+ * @bus: The bus.
+ * @ctx: Context structure. Pass this to ssb_devices_thaw().
+ */
+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx)
 {
-	struct ssb_device *dev;
-	struct ssb_driver *drv;
-	int err = 0;
-	int i;
-	pm_message_t state = PMSG_FREEZE;
+	struct ssb_device *sdev;
+	struct ssb_driver *sdrv;
+	unsigned int i;
 
-	/* First check that we are capable to freeze all devices. */
+	memset(ctx, 0, sizeof(*ctx));
+	ctx->bus = bus;
+	SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen));
+
 	for (i = 0; i < bus->nr_devices; i++) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
+		sdev = ssb_device_get(&bus->devices[i]);
+
+		if (!sdev->dev || !sdev->dev->driver ||
+		    !device_is_registered(sdev->dev)) {
+			ssb_device_put(sdev);
 			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
-			continue;
-		if (!drv->suspend) {
-			/* Nope, can't suspend this one. */
-			return -EOPNOTSUPP;
 		}
-	}
-	/* Now suspend all devices */
-	for (i = 0; i < bus->nr_devices; i++) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
+		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
+		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
+			ssb_device_put(sdev);
 			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
-			continue;
-		err = drv->suspend(dev, state);
-		if (err) {
-			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
-				   dev_name(dev->dev));
-			goto err_unwind;
 		}
+		sdrv->remove(sdev);
+		ctx->device_frozen[i] = 1;
 	}
 
 	return 0;
-err_unwind:
-	for (i--; i >= 0; i--) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
-			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
-			continue;
-		if (drv->resume)
-			drv->resume(dev);
-	}
-	return err;
 }
 
-int ssb_devices_thaw(struct ssb_bus *bus)
+/** ssb_devices_thaw - Unfreeze all devices on the bus.
+ *
+ * This will re-attach the device drivers and re-init the devices.
+ *
+ * @ctx: The context structure from ssb_devices_freeze()
+ */
+int ssb_devices_thaw(struct ssb_freeze_context *ctx)
 {
-	struct ssb_device *dev;
-	struct ssb_driver *drv;
-	int err;
-	int i;
+	struct ssb_bus *bus = ctx->bus;
+	struct ssb_device *sdev;
+	struct ssb_driver *sdrv;
+	unsigned int i;
+	int err, result = 0;
 
 	for (i = 0; i < bus->nr_devices; i++) {
-		dev = &(bus->devices[i]);
-		if (!dev->dev ||
-		    !dev->dev->driver ||
-		    !device_is_registered(dev->dev))
+		if (!ctx->device_frozen[i])
 			continue;
-		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (!drv)
+		sdev = &bus->devices[i];
+
+		if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver))
 			continue;
-		if (SSB_WARN_ON(!drv->resume))
+		sdrv = drv_to_ssb_drv(sdev->dev->driver);
+		if (SSB_WARN_ON(!sdrv || !sdrv->probe))
 			continue;
-		err = drv->resume(dev);
+
+		err = sdrv->probe(sdev, &sdev->id);
 		if (err) {
 			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
-				   dev_name(dev->dev));
+				   dev_name(sdev->dev));
+			result = err;
 		}
+		ssb_driver_put(sdrv);
+		ssb_device_put(sdev);
 	}
 
-	return 0;
+	return result;
 }
 #endif /* CONFIG_SSB_SPROM */
 
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index 100e7a5..e72f404 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -617,136 +617,140 @@
 	}						\
   } while (0)
 
-int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
-			      struct ssb_init_invariants *iv)
+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev,
+			tuple_t *tuple,
+			void *priv)
 {
-	tuple_t tuple;
-	int res;
-	unsigned char buf[32];
+	struct ssb_sprom *sprom = priv;
+
+	if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID)
+		return -EINVAL;
+	if (tuple->TupleDataLen != ETH_ALEN + 2)
+		return -EINVAL;
+	if (tuple->TupleData[1] != ETH_ALEN)
+		return -EINVAL;
+	memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN);
+	return 0;
+};
+
+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev,
+					tuple_t *tuple,
+					void *priv)
+{
+	struct ssb_init_invariants *iv = priv;
 	struct ssb_sprom *sprom = &iv->sprom;
 	struct ssb_boardinfo *bi = &iv->boardinfo;
 	const char *error_description;
 
+	GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1");
+	switch (tuple->TupleData[0]) {
+	case SSB_PCMCIA_CIS_ID:
+		GOTO_ERROR_ON((tuple->TupleDataLen != 5) &&
+			      (tuple->TupleDataLen != 7),
+			      "id tpl size");
+		bi->vendor = tuple->TupleData[1] |
+			((u16)tuple->TupleData[2] << 8);
+		break;
+	case SSB_PCMCIA_CIS_BOARDREV:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"boardrev tpl size");
+		sprom->board_rev = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_PA:
+		GOTO_ERROR_ON((tuple->TupleDataLen != 9) &&
+			(tuple->TupleDataLen != 10),
+			"pa tpl size");
+		sprom->pa0b0 = tuple->TupleData[1] |
+			((u16)tuple->TupleData[2] << 8);
+		sprom->pa0b1 = tuple->TupleData[3] |
+			((u16)tuple->TupleData[4] << 8);
+		sprom->pa0b2 = tuple->TupleData[5] |
+			((u16)tuple->TupleData[6] << 8);
+		sprom->itssi_a = tuple->TupleData[7];
+		sprom->itssi_bg = tuple->TupleData[7];
+		sprom->maxpwr_a = tuple->TupleData[8];
+		sprom->maxpwr_bg = tuple->TupleData[8];
+		break;
+	case SSB_PCMCIA_CIS_OEMNAME:
+		/* We ignore this. */
+		break;
+	case SSB_PCMCIA_CIS_CCODE:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"ccode tpl size");
+		sprom->country_code = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_ANTENNA:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"ant tpl size");
+		sprom->ant_available_a = tuple->TupleData[1];
+		sprom->ant_available_bg = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_ANTGAIN:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+			"antg tpl size");
+		sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+		sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
+		break;
+	case SSB_PCMCIA_CIS_BFLAGS:
+		GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
+			(tuple->TupleDataLen != 5),
+			"bfl tpl size");
+		sprom->boardflags_lo = tuple->TupleData[1] |
+			((u16)tuple->TupleData[2] << 8);
+		break;
+	case SSB_PCMCIA_CIS_LEDS:
+		GOTO_ERROR_ON(tuple->TupleDataLen != 5,
+			"leds tpl size");
+		sprom->gpio0 = tuple->TupleData[1];
+		sprom->gpio1 = tuple->TupleData[2];
+		sprom->gpio2 = tuple->TupleData[3];
+		sprom->gpio3 = tuple->TupleData[4];
+		break;
+	}
+	return -ENOSPC; /* continue with next entry */
+
+error:
+	ssb_printk(KERN_ERR PFX
+		   "PCMCIA: Failed to fetch device invariants: %s\n",
+		   error_description);
+	return -ENODEV;
+}
+
+
+int ssb_pcmcia_get_invariants(struct ssb_bus *bus,
+			      struct ssb_init_invariants *iv)
+{
+	struct ssb_sprom *sprom = &iv->sprom;
+	int res;
+
 	memset(sprom, 0xFF, sizeof(*sprom));
 	sprom->revision = 1;
 	sprom->boardflags_lo = 0;
 	sprom->boardflags_hi = 0;
 
 	/* First fetch the MAC address. */
-	memset(&tuple, 0, sizeof(tuple));
-	tuple.DesiredTuple = CISTPL_FUNCE;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "MAC first tpl");
-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "MAC first tpl data");
-	while (1) {
-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
-		if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
-			break;
-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != 0, "MAC next tpl");
-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != 0, "MAC next tpl data");
+	res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
+				ssb_pcmcia_get_mac, sprom);
+	if (res != 0) {
+		ssb_printk(KERN_ERR PFX
+			"PCMCIA: Failed to fetch MAC address\n");
+		return -ENODEV;
 	}
-	GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
-	memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
 
 	/* Fetch the vendor specific tuples. */
-	memset(&tuple, 0, sizeof(tuple));
-	tuple.DesiredTuple = SSB_PCMCIA_CIS;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "VEN first tpl");
-	res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-	GOTO_ERROR_ON(res != 0, "VEN first tpl data");
-	while (1) {
-		GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
-		switch (tuple.TupleData[0]) {
-		case SSB_PCMCIA_CIS_ID:
-			GOTO_ERROR_ON((tuple.TupleDataLen != 5) &&
-				      (tuple.TupleDataLen != 7),
-				      "id tpl size");
-			bi->vendor = tuple.TupleData[1] |
-			       ((u16)tuple.TupleData[2] << 8);
-			break;
-		case SSB_PCMCIA_CIS_BOARDREV:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "boardrev tpl size");
-			sprom->board_rev = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_PA:
-			GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
-				      (tuple.TupleDataLen != 10),
-				      "pa tpl size");
-			sprom->pa0b0 = tuple.TupleData[1] |
-				 ((u16)tuple.TupleData[2] << 8);
-			sprom->pa0b1 = tuple.TupleData[3] |
-				 ((u16)tuple.TupleData[4] << 8);
-			sprom->pa0b2 = tuple.TupleData[5] |
-				 ((u16)tuple.TupleData[6] << 8);
-			sprom->itssi_a = tuple.TupleData[7];
-			sprom->itssi_bg = tuple.TupleData[7];
-			sprom->maxpwr_a = tuple.TupleData[8];
-			sprom->maxpwr_bg = tuple.TupleData[8];
-			break;
-		case SSB_PCMCIA_CIS_OEMNAME:
-			/* We ignore this. */
-			break;
-		case SSB_PCMCIA_CIS_CCODE:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "ccode tpl size");
-			sprom->country_code = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_ANTENNA:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "ant tpl size");
-			sprom->ant_available_a = tuple.TupleData[1];
-			sprom->ant_available_bg = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_ANTGAIN:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 2,
-				      "antg tpl size");
-			sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1];
-			sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
-			break;
-		case SSB_PCMCIA_CIS_BFLAGS:
-			GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
-				      (tuple.TupleDataLen != 5),
-				      "bfl tpl size");
-			sprom->boardflags_lo = tuple.TupleData[1] |
-					 ((u16)tuple.TupleData[2] << 8);
-			break;
-		case SSB_PCMCIA_CIS_LEDS:
-			GOTO_ERROR_ON(tuple.TupleDataLen != 5,
-				      "leds tpl size");
-			sprom->gpio0 = tuple.TupleData[1];
-			sprom->gpio1 = tuple.TupleData[2];
-			sprom->gpio2 = tuple.TupleData[3];
-			sprom->gpio3 = tuple.TupleData[4];
-			break;
-		}
-		res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-		if (res == -ENOSPC)
-			break;
-		GOTO_ERROR_ON(res != 0, "VEN next tpl");
-		res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-		GOTO_ERROR_ON(res != 0, "VEN next tpl data");
-	}
+	res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
+				ssb_pcmcia_do_get_invariants, sprom);
+	if ((res == 0) || (res == -ENOSPC))
+		return 0;
 
-	return 0;
-error:
 	ssb_printk(KERN_ERR PFX
-		   "PCMCIA: Failed to fetch device invariants: %s\n",
-		   error_description);
+			"PCMCIA: Failed to fetch device invariants\n");
 	return -ENODEV;
 }
 
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index e8b89e8..0d6c028 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -354,7 +354,7 @@
 		dev->bus = bus;
 		dev->ops = bus->ops;
 
-		ssb_dprintk(KERN_INFO PFX
+		printk(KERN_DEBUG PFX
 			    "Core %d found: %s "
 			    "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
 			    i, ssb_core_name(dev->id.coreid),
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 8943015..d0e6762 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -13,6 +13,8 @@
 
 #include "ssb_private.h"
 
+#include <linux/ctype.h>
+
 
 static const struct ssb_sprom *fallback_sprom;
 
@@ -33,17 +35,27 @@
 static int hex2sprom(u16 *sprom, const char *dump, size_t len,
 		     size_t sprom_size_words)
 {
-	char tmp[5] = { 0 };
-	int cnt = 0;
+	char c, tmp[5] = { 0 };
+	int err, cnt = 0;
 	unsigned long parsed;
 
-	if (len < sprom_size_words * 2)
+	/* Strip whitespace at the end. */
+	while (len) {
+		c = dump[len - 1];
+		if (!isspace(c) && c != '\0')
+			break;
+		len--;
+	}
+	/* Length must match exactly. */
+	if (len != sprom_size_words * 4)
 		return -EINVAL;
 
 	while (cnt < sprom_size_words) {
 		memcpy(tmp, dump, 4);
 		dump += 4;
-		parsed = simple_strtoul(tmp, NULL, 16);
+		err = strict_strtoul(tmp, 16, &parsed);
+		if (err)
+			return err;
 		sprom[cnt++] = swab16((u16)parsed);
 	}
 
@@ -90,6 +102,7 @@
 	u16 *sprom;
 	int res = 0, err = -ENOMEM;
 	size_t sprom_size_words = bus->sprom_size;
+	struct ssb_freeze_context freeze;
 
 	sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL);
 	if (!sprom)
@@ -111,18 +124,13 @@
 	err = -ERESTARTSYS;
 	if (mutex_lock_interruptible(&bus->sprom_mutex))
 		goto out_kfree;
-	err = ssb_devices_freeze(bus);
-	if (err == -EOPNOTSUPP) {
-		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
-			   "No suspend support. Is CONFIG_PM enabled?\n");
-		goto out_unlock;
-	}
+	err = ssb_devices_freeze(bus, &freeze);
 	if (err) {
 		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
 		goto out_unlock;
 	}
 	res = sprom_write(bus, sprom);
-	err = ssb_devices_thaw(bus);
+	err = ssb_devices_thaw(&freeze);
 	if (err)
 		ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
 out_unlock:
diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h
index 2543356..56054be 100644
--- a/drivers/ssb/ssb_private.h
+++ b/drivers/ssb/ssb_private.h
@@ -176,13 +176,21 @@
 
 /* core.c */
 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
-extern int ssb_devices_freeze(struct ssb_bus *bus);
-extern int ssb_devices_thaw(struct ssb_bus *bus);
 extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
 int ssb_for_each_bus_call(unsigned long data,
 			  int (*func)(struct ssb_bus *bus, unsigned long data));
 extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev);
 
+struct ssb_freeze_context {
+	/* Pointer to the bus */
+	struct ssb_bus *bus;
+	/* Boolean list to indicate whether a device is frozen on this bus. */
+	bool device_frozen[SSB_MAX_NR_CORES];
+};
+extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx);
+extern int ssb_devices_thaw(struct ssb_freeze_context *ctx);
+
+
 
 /* b43_pci_bridge.c */
 #ifdef CONFIG_SSB_B43_PCI_BRIDGE
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index d21b346..dfcd75c 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -125,5 +125,13 @@
 
 source "drivers/staging/iio/Kconfig"
 
+source "drivers/staging/strip/Kconfig"
+
+source "drivers/staging/arlan/Kconfig"
+
+source "drivers/staging/wavelan/Kconfig"
+
+source "drivers/staging/netwave/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8cbf1ae..7719d04 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -44,3 +44,8 @@
 obj-$(CONFIG_RAR_REGISTER)	+= rar/
 obj-$(CONFIG_DX_SEP)		+= sep/
 obj-$(CONFIG_IIO)		+= iio/
+obj-$(CONFIG_STRIP)		+= strip/
+obj-$(CONFIG_ARLAN)		+= arlan/
+obj-$(CONFIG_WAVELAN)		+= wavelan/
+obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan/
+obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave/
diff --git a/drivers/staging/arlan/Kconfig b/drivers/staging/arlan/Kconfig
new file mode 100644
index 0000000..5e42b81
--- /dev/null
+++ b/drivers/staging/arlan/Kconfig
@@ -0,0 +1,15 @@
+config ARLAN
+	tristate "Aironet Arlan 655 & IC2200 DS support"
+	depends on ISA && !64BIT && WLAN
+	select WIRELESS_EXT
+	---help---
+	  Aironet makes Arlan, a class of wireless LAN adapters. These use the
+	  www.Telxon.com chip, which is also used on several similar cards.
+	  This driver is tested on the 655 and IC2200 series cards. Look at
+	  <http://www.ylenurme.ee/~elmer/655/> for the latest information.
+
+	  The driver is built as two modules, arlan and arlan-proc. The latter
+	  is the /proc interface and is not needed most of time.
+
+	  On some computers the card ends up in non-valid state after some
+	  time. Use a ping-reset script to clear it.
diff --git a/drivers/staging/arlan/Makefile b/drivers/staging/arlan/Makefile
new file mode 100644
index 0000000..9e58e5f
--- /dev/null
+++ b/drivers/staging/arlan/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_ARLAN) += arlan.o 
+
+arlan-objs := arlan-main.o arlan-proc.o
diff --git a/drivers/staging/arlan/TODO b/drivers/staging/arlan/TODO
new file mode 100644
index 0000000..9bd15a2
--- /dev/null
+++ b/drivers/staging/arlan/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/staging/arlan/arlan-main.c
similarity index 100%
rename from drivers/net/wireless/arlan-main.c
rename to drivers/staging/arlan/arlan-main.c
diff --git a/drivers/staging/arlan/arlan-proc.c b/drivers/staging/arlan/arlan-proc.c
new file mode 100644
index 0000000..b22983e
--- /dev/null
+++ b/drivers/staging/arlan/arlan-proc.c
@@ -0,0 +1,1210 @@
+#include "arlan.h"
+
+#include <linux/sysctl.h>
+
+#ifdef CONFIG_PROC_FS
+
+/* void enableReceive(struct net_device* dev);
+*/
+
+
+
+#define ARLAN_STR_SIZE 	0x2ff0
+#define DEV_ARLAN_INFO 	1
+#define DEV_ARLAN 	1
+#define SARLG(type,var) {\
+	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n", #var, READSHMB(priva->card->var));	\
+	}
+
+#define SARLBN(type,var,nn) {\
+	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x",#var);\
+	for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\
+	pos += sprintf(arlan_drive_info+pos, "\n");	\
+	}
+
+#define SARLBNpln(type,var,nn) {\
+	for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\
+	}
+
+#define SARLSTR(var,nn) {\
+	char tmpStr[400];\
+	int  tmpLn = nn;\
+	if (nn > 399 ) tmpLn = 399; \
+	memcpy(tmpStr,(char *) priva->conf->var,tmpLn);\
+	tmpStr[tmpLn] = 0; \
+	pos += sprintf(arlan_drive_info+pos, "%s\t=\t%s \n",#var,priva->conf->var);\
+	}
+
+#define SARLUC(var)  	SARLG(u_char, var)
+#define SARLUCN(var,nn) SARLBN(u_char,var, nn)
+#define SARLUS(var)	SARLG(u_short, var)
+#define SARLUSN(var,nn)	SARLBN(u_short,var, nn)
+#define SARLUI(var)	SARLG(u_int, var)
+
+#define SARLUSA(var) {\
+	u_short tmpVar;\
+	memcpy(&tmpVar, (short *) priva->conf->var,2); \
+	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\
+}
+
+#define SARLUIA(var) {\
+	u_int tmpVar;\
+	memcpy(&tmpVar, (int* )priva->conf->var,4); \
+	pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\
+}
+
+
+static const char *arlan_diagnostic_info_string(struct net_device *dev)
+{
+
+	struct arlan_private *priv = netdev_priv(dev);
+	volatile struct arlan_shmem __iomem *arlan = priv->card;
+	u_char diagnosticInfo;
+
+	READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char);
+
+	switch (diagnosticInfo)
+	{
+		case 0xFF:
+			return "Diagnostic info is OK";
+		case 0xFE:
+			return "ERROR EPROM Checksum error ";
+		case 0xFD:
+			return "ERROR Local Ram Test Failed ";
+		case 0xFC:
+			return "ERROR SCC failure ";
+		case 0xFB:
+			return "ERROR BackBone failure ";
+		case 0xFA:
+			return "ERROR transceiver not found ";
+		case 0xF9:
+			return "ERROR no more address space ";
+		case 0xF8:
+			return "ERROR Checksum error  ";
+		case 0xF7:
+			return "ERROR Missing SS Code";
+		case 0xF6:
+			return "ERROR Invalid config format";
+		case 0xF5:
+			return "ERROR Reserved errorcode F5";
+		case 0xF4:
+			return "ERROR Invalid spreading code/channel number";
+		case 0xF3:
+			return "ERROR Load Code Error";
+		case 0xF2:
+			return "ERROR Reserver errorcode F2 ";
+		case 0xF1:
+			return "ERROR Invalid command receivec by LAN card ";
+		case 0xF0:
+			return "ERROR Invalid parameter found in command ";
+		case 0xEF:
+			return "ERROR On-chip timer failure ";
+		case 0xEE:
+			return "ERROR T410 timer failure ";
+		case 0xED:
+			return "ERROR Too Many TxEnable commands ";
+		case 0xEC:
+			return "ERROR EEPROM error on radio module ";
+		default:
+			return "ERROR unknown Diagnostic info reply code ";
+	  }
+}
+
+static const char *arlan_hardware_type_string(struct net_device *dev)
+{
+	u_char hardwareType;
+	struct arlan_private *priv = netdev_priv(dev);
+	volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+	READSHM(hardwareType, arlan->hardwareType, u_char);
+	switch (hardwareType)
+	{
+		case 0x00:
+			return "type A450";
+		case 0x01:
+			return "type A650 ";
+		case 0x04:
+			return "type TMA coproc";
+		case 0x0D:
+			return "type A650E ";
+		case 0x18:
+			return "type TMA coproc Australian";
+		case 0x19:
+			return "type A650A ";
+		case 0x26:
+			return "type TMA coproc European";
+		case 0x2E:
+			return "type A655 ";
+		case 0x2F:
+			return "type A655A ";
+		case 0x30:
+			return "type A655E ";
+		case 0x0B:
+			return "type A670 ";
+		case 0x0C:
+			return "type A670E ";
+		case 0x2D:
+			return "type A670A ";
+		case 0x0F:
+			return "type A411T";
+		case 0x16:
+			return "type A411TA";
+		case 0x1B:
+			return "type A440T";
+		case 0x1C:
+			return "type A412T";
+		case 0x1E:
+			return "type A412TA";
+		case 0x22:
+			return "type A411TE";
+		case 0x24:
+			return "type A412TE";
+		case 0x27:
+			return "type A671T ";
+		case 0x29:
+			return "type A671TA ";
+		case 0x2B:
+			return "type A671TE ";
+		case 0x31:
+			return "type A415T ";
+		case 0x33:
+			return "type A415TA ";
+		case 0x35:
+			return "type A415TE ";
+		case 0x37:
+			return "type A672";
+		case 0x39:
+			return "type A672A ";
+		case 0x3B:
+			return "type A672T";
+		case 0x6B:
+			return "type IC2200";
+		default:
+			return "type A672T";
+	}
+}
+#ifdef ARLAN_DEBUGGING
+static void arlan_print_diagnostic_info(struct net_device *dev)
+{
+	int i;
+	u_char diagnosticInfo;
+	u_short diagnosticOffset;
+	u_char hardwareType;
+	struct arlan_private *priv = netdev_priv(dev);
+	volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+	//  ARLAN_DEBUG_ENTRY("arlan_print_diagnostic_info");
+
+	if (READSHMB(arlan->configuredStatusFlag) == 0)
+		printk("Arlan: Card NOT configured\n");
+	else
+		printk("Arlan: Card is configured\n");
+
+	READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char);
+	READSHM(diagnosticOffset, arlan->diagnosticOffset, u_short);
+
+	printk(KERN_INFO "%s\n", arlan_diagnostic_info_string(dev));
+
+	if (diagnosticInfo != 0xff)
+		printk("%s arlan: Diagnostic Offset %d \n", dev->name, diagnosticOffset);
+
+	printk("arlan: LAN CODE ID = ");
+	for (i = 0; i < 6; i++)
+		DEBUGSHM(1, "%03d:", arlan->lanCardNodeId[i], u_char);
+	printk("\n");
+
+	printk("arlan: Arlan BroadCast address  = ");
+	for (i = 0; i < 6; i++)
+		DEBUGSHM(1, "%03d:", arlan->broadcastAddress[i], u_char);
+	printk("\n");
+
+	READSHM(hardwareType, arlan->hardwareType, u_char);
+	printk(KERN_INFO "%s\n", arlan_hardware_type_string(dev));
+
+
+	DEBUGSHM(1, "arlan: channelNumber=%d\n", arlan->channelNumber, u_char);
+	DEBUGSHM(1, "arlan: channelSet=%d\n", arlan->channelSet, u_char);
+	DEBUGSHM(1, "arlan: spreadingCode=%d\n", arlan->spreadingCode, u_char);
+	DEBUGSHM(1, "arlan: radioNodeId=%d\n", arlan->radioNodeId, u_short);
+	DEBUGSHM(1, "arlan: SID	=%d\n", arlan->SID, u_short);
+	DEBUGSHM(1, "arlan: rxOffset=%d\n", arlan->rxOffset, u_short);
+
+	DEBUGSHM(1, "arlan: registration mode is %d\n", arlan->registrationMode, u_char);
+
+	printk("arlan: name= ");
+	IFDEBUG(1)
+	
+	for (i = 0; i < 16; i++)
+	{
+		char c;
+		READSHM(c, arlan->name[i], char);
+		if (c)
+			printk("%c", c);
+	}
+	printk("\n");
+
+//   ARLAN_DEBUG_EXIT("arlan_print_diagnostic_info");
+
+}
+
+
+/******************************		TEST 	MEMORY	**************/
+
+static int arlan_hw_test_memory(struct net_device *dev)
+{
+	u_char *ptr;
+	int i;
+	int memlen = sizeof(struct arlan_shmem) - 0xF;	/* avoid control register */
+	volatile char *arlan_mem = (char *) (dev->mem_start);
+	struct arlan_private *priv = netdev_priv(dev);
+	volatile struct arlan_shmem __iomem *arlan = priv->card;
+	char pattern;
+
+	ptr = NULL;
+
+	/* hold card in reset state */
+	setHardwareReset(dev);
+
+	/* test memory */
+	pattern = 0;
+	for (i = 0; i < memlen; i++)
+		WRITESHM(arlan_mem[i], ((u_char) pattern++), u_char);
+
+	pattern = 0;
+	for (i = 0; i < memlen; i++)
+	{
+		char res;
+		READSHM(res, arlan_mem[i], char);
+		if (res != pattern++)
+		{
+			printk(KERN_ERR "Arlan driver memory test 1 failed \n");
+			return -1;
+		}
+	}
+
+	pattern = 0;
+	for (i = 0; i < memlen; i++)
+		WRITESHM(arlan_mem[i], ~(pattern++), char);
+
+	pattern = 0;
+	for (i = 0; i < memlen; i++)
+	{
+		char res;
+		READSHM(res, arlan_mem[i], char);
+		if (res != ~(pattern++))
+		{
+			printk(KERN_ERR "Arlan driver memory test 2 failed \n");
+			return -1;
+		}
+	}
+
+	/* zero memory */
+	for (i = 0; i < memlen; i++)
+		WRITESHM(arlan_mem[i], 0x00, char);
+
+	IFDEBUG(1) printk(KERN_INFO "Arlan: memory tests ok\n");
+
+	/* set reset flag and then release reset */
+	WRITESHM(arlan->resetFlag, 0xff, u_char);
+
+	clearChannelAttention(dev);
+	clearHardwareReset(dev);
+
+	/* wait for reset flag to become zero, we'll wait for two seconds */
+	if (arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW))
+	{
+		printk(KERN_ERR "%s arlan: failed to come back from memory test\n", dev->name);
+		return -1;
+	}
+	return 0;
+}
+
+static int arlan_setup_card_by_book(struct net_device *dev)
+{
+	u_char irqLevel, configuredStatusFlag;
+	struct arlan_private *priv = netdev_priv(dev);
+	volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+//	ARLAN_DEBUG_ENTRY("arlan_setup_card");
+
+	READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char);
+
+	IFDEBUG(10)
+	if (configuredStatusFlag != 0)
+		IFDEBUG(10) printk("arlan: CARD IS CONFIGURED\n");
+	else
+		IFDEBUG(10) printk("arlan: card is NOT configured\n");
+
+	if (testMemory || (READSHMB(arlan->diagnosticInfo) != 0xff))
+		if (arlan_hw_test_memory(dev))
+			return -1;
+
+	DEBUGSHM(4, "arlan configuredStatus = %d \n", arlan->configuredStatusFlag, u_char);
+	DEBUGSHM(4, "arlan driver diagnostic: 0x%2x\n", arlan->diagnosticInfo, u_char);
+
+	/* issue nop command - no interrupt */
+	arlan_command(dev, ARLAN_COMMAND_NOOP);
+	if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0)
+		return -1;
+
+	IFDEBUG(50) printk("1st Noop successfully executed !!\n");
+
+	/* try to turn on the arlan interrupts */
+	clearClearInterrupt(dev);
+	setClearInterrupt(dev);
+	setInterruptEnable(dev);
+
+	/* issue nop command - with interrupt */
+
+	arlan_command(dev, ARLAN_COMMAND_NOOPINT);
+	if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0)
+		return -1;
+
+
+	IFDEBUG(50) printk("2nd Noop successfully executed !!\n");
+
+	READSHM(irqLevel, arlan->irqLevel, u_char)
+	
+	if (irqLevel != dev->irq)
+	{
+		IFDEBUG(1) printk(KERN_WARNING "arlan dip switches set irq to %d\n", irqLevel);
+		printk(KERN_WARNING "device driver irq set to %d - does not match\n", dev->irq);
+		dev->irq = irqLevel;
+	}
+	else
+		IFDEBUG(2) printk("irq level is OK\n");
+
+
+	IFDEBUG(3) arlan_print_diagnostic_info(dev);
+
+	arlan_command(dev, ARLAN_COMMAND_CONF);
+
+	READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char);
+	if (configuredStatusFlag == 0)
+	{
+		printk(KERN_WARNING "arlan configure failed\n");
+		return -1;
+	}
+	arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW);
+	arlan_command(dev, ARLAN_COMMAND_RX);
+	arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW);
+	printk(KERN_NOTICE "%s: arlan driver version %s loaded\n",
+	       dev->name, arlan_version);
+
+//	ARLAN_DEBUG_EXIT("arlan_setup_card");
+
+	return 0;		/* no errors */
+}
+#endif
+
+#ifdef ARLAN_PROC_INTERFACE
+#ifdef ARLAN_PROC_SHM_DUMP
+
+static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0";
+
+static int arlan_sysctl_info(ctl_table * ctl, int write,
+		      void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int i;
+	int retv, pos, devnum;
+	struct arlan_private *priva = NULL;
+	struct net_device *dev;
+	pos = 0;
+	if (write)
+	{
+		printk("wrirte: ");
+		for (i = 0; i < 100; i++)
+			printk("adi %x \n", arlan_drive_info[i]);
+	}
+	if (ctl->procname == NULL || arlan_drive_info == NULL)
+	{
+		printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL \n at arlan module\n ");
+		return -1;
+	}
+	devnum = ctl->procname[5] - '0';
+	if (devnum < 0 || devnum > MAX_ARLANS - 1)
+	{
+		printk(KERN_WARNING "too strange devnum in procfs parse\n ");
+		return -1;
+	}
+	else if (arlan_device[devnum] == NULL)
+	{
+		if (ctl->procname)
+			pos += sprintf(arlan_drive_info + pos, "\t%s\n\n", ctl->procname);
+		pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+		goto final;
+	}
+	else
+		priva = netdev_priv(arlan_device[devnum]);
+
+	if (priva == NULL)
+	{
+		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+		return -1;
+	}
+	dev = arlan_device[devnum];
+
+	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+
+	pos = sprintf(arlan_drive_info, "Arlan  info \n");
+	/* Header Signature */
+	SARLSTR(textRegion, 48);
+	SARLUC(resetFlag);
+	pos += sprintf(arlan_drive_info + pos, "diagnosticInfo\t=\t%s \n", arlan_diagnostic_info_string(dev));
+	SARLUC(diagnosticInfo);
+	SARLUS(diagnosticOffset);
+	SARLUCN(_1, 12);
+	SARLUCN(lanCardNodeId, 6);
+	SARLUCN(broadcastAddress, 6);
+	pos += sprintf(arlan_drive_info + pos, "hardwareType =\t  %s \n", arlan_hardware_type_string(dev));
+	SARLUC(hardwareType);
+	SARLUC(majorHardwareVersion);
+	SARLUC(minorHardwareVersion);
+	SARLUC(radioModule);
+	SARLUC(defaultChannelSet);
+	SARLUCN(_2, 47);
+
+	/* Control/Status Block - 0x0080 */
+	SARLUC(interruptInProgress);
+	SARLUC(cntrlRegImage);
+
+	SARLUCN(_3, 14);
+	SARLUC(commandByte);
+	SARLUCN(commandParameter, 15);
+
+	/* Receive Status - 0x00a0 */
+	SARLUC(rxStatus);
+	SARLUC(rxFrmType);
+	SARLUS(rxOffset);
+	SARLUS(rxLength);
+	SARLUCN(rxSrc, 6);
+	SARLUC(rxBroadcastFlag);
+	SARLUC(rxQuality);
+	SARLUC(scrambled);
+	SARLUCN(_4, 1);
+
+	/* Transmit Status - 0x00b0 */
+	SARLUC(txStatus);
+	SARLUC(txAckQuality);
+	SARLUC(numRetries);
+	SARLUCN(_5, 14);
+	SARLUCN(registeredRouter, 6);
+	SARLUCN(backboneRouter, 6);
+	SARLUC(registrationStatus);
+	SARLUC(configuredStatusFlag);
+	SARLUCN(_6, 1);
+	SARLUCN(ultimateDestAddress, 6);
+	SARLUCN(immedDestAddress, 6);
+	SARLUCN(immedSrcAddress, 6);
+	SARLUS(rxSequenceNumber);
+	SARLUC(assignedLocaltalkAddress);
+	SARLUCN(_7, 27);
+
+	/* System Parameter Block */
+
+	/* - Driver Parameters (Novell Specific) */
+
+	SARLUS(txTimeout);
+	SARLUS(transportTime);
+	SARLUCN(_8, 4);
+
+	/* - Configuration Parameters */
+	SARLUC(irqLevel);
+	SARLUC(spreadingCode);
+	SARLUC(channelSet);
+	SARLUC(channelNumber);
+	SARLUS(radioNodeId);
+	SARLUCN(_9, 2);
+	SARLUC(scramblingDisable);
+	SARLUC(radioType);
+	SARLUS(routerId);
+	SARLUCN(_10, 9);
+	SARLUC(txAttenuation);
+	SARLUIA(systemId);
+	SARLUS(globalChecksum);
+	SARLUCN(_11, 4);
+	SARLUS(maxDatagramSize);
+	SARLUS(maxFrameSize);
+	SARLUC(maxRetries);
+	SARLUC(receiveMode);
+	SARLUC(priority);
+	SARLUC(rootOrRepeater);
+	SARLUCN(specifiedRouter, 6);
+	SARLUS(fastPollPeriod);
+	SARLUC(pollDecay);
+	SARLUSA(fastPollDelay);
+	SARLUC(arlThreshold);
+	SARLUC(arlDecay);
+	SARLUCN(_12, 1);
+	SARLUS(specRouterTimeout);
+	SARLUCN(_13, 5);
+
+	/* Scrambled Area */
+	SARLUIA(SID);
+	SARLUCN(encryptionKey, 12);
+	SARLUIA(_14);
+	SARLUSA(waitTime);
+	SARLUSA(lParameter);
+	SARLUCN(_15, 3);
+	SARLUS(headerSize);
+	SARLUS(sectionChecksum);
+
+	SARLUC(registrationMode);
+	SARLUC(registrationFill);
+	SARLUS(pollPeriod);
+	SARLUS(refreshPeriod);
+	SARLSTR(name, 16);
+	SARLUCN(NID, 6);
+	SARLUC(localTalkAddress);
+	SARLUC(codeFormat);
+	SARLUC(numChannels);
+	SARLUC(channel1);
+	SARLUC(channel2);
+	SARLUC(channel3);
+	SARLUC(channel4);
+	SARLUCN(SSCode, 59);
+
+/*      SARLUCN( _16, 0x140);
+ */
+	/* Statistics Block - 0x0300 */
+	SARLUC(hostcpuLock);
+	SARLUC(lancpuLock);
+	SARLUCN(resetTime, 18);
+	SARLUIA(numDatagramsTransmitted);
+	SARLUIA(numReTransmissions);
+	SARLUIA(numFramesDiscarded);
+	SARLUIA(numDatagramsReceived);
+	SARLUIA(numDuplicateReceivedFrames);
+	SARLUIA(numDatagramsDiscarded);
+	SARLUS(maxNumReTransmitDatagram);
+	SARLUS(maxNumReTransmitFrames);
+	SARLUS(maxNumConsecutiveDuplicateFrames);
+	/* misaligned here so we have to go to characters */
+	SARLUIA(numBytesTransmitted);
+	SARLUIA(numBytesReceived);
+	SARLUIA(numCRCErrors);
+	SARLUIA(numLengthErrors);
+	SARLUIA(numAbortErrors);
+	SARLUIA(numTXUnderruns);
+	SARLUIA(numRXOverruns);
+	SARLUIA(numHoldOffs);
+	SARLUIA(numFramesTransmitted);
+	SARLUIA(numFramesReceived);
+	SARLUIA(numReceiveFramesLost);
+	SARLUIA(numRXBufferOverflows);
+	SARLUIA(numFramesDiscardedAddrMismatch);
+	SARLUIA(numFramesDiscardedSIDMismatch);
+	SARLUIA(numPollsTransmistted);
+	SARLUIA(numPollAcknowledges);
+	SARLUIA(numStatusTimeouts);
+	SARLUIA(numNACKReceived);
+	SARLUS(auxCmd);
+	SARLUCN(dumpPtr, 4);
+	SARLUC(dumpVal);
+	SARLUC(wireTest);
+	
+	/* next 4 seems too long for procfs, over single page ?
+	SARLUCN( _17, 0x86);
+	SARLUCN( txBuffer, 0x800);
+	SARLUCN( rxBuffer,  0x800); 
+	SARLUCN( _18, 0x0bff);
+	 */
+
+	pos += sprintf(arlan_drive_info + pos, "rxRing\t=\t0x");
+	for (i = 0; i < 0x50; i++)
+		pos += sprintf(arlan_drive_info + pos, "%02x", ((char *) priva->conf)[priva->conf->rxOffset + i]);
+	pos += sprintf(arlan_drive_info + pos, "\n");
+
+	SARLUC(configStatus);
+	SARLUC(_22);
+	SARLUC(progIOCtrl);
+	SARLUC(shareMBase);
+	SARLUC(controlRegister);
+
+	pos += sprintf(arlan_drive_info + pos, " total %d chars\n", pos);
+	if (ctl)
+		if (ctl->procname)
+			pos += sprintf(arlan_drive_info + pos, " driver name : %s\n", ctl->procname);
+final:
+	*lenp = pos;
+
+	if (!write)
+		retv = proc_dostring(ctl, write, buffer, lenp, ppos);
+	else
+	{
+		*lenp = 0;
+		return -1;
+	}
+	return retv;
+}
+
+
+static int arlan_sysctl_info161719(ctl_table * ctl, int write,
+			    void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int i;
+	int retv, pos, devnum;
+	struct arlan_private *priva = NULL;
+
+	pos = 0;
+	devnum = ctl->procname[5] - '0';
+	if (arlan_device[devnum] == NULL)
+	{
+		pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+		goto final;
+	}
+	else
+		priva = netdev_priv(arlan_device[devnum]);
+	if (priva == NULL)
+	{
+		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+		return -1;
+	}
+	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+	SARLUCN(_16, 0xC0);
+	SARLUCN(_17, 0x6A);
+	SARLUCN(_18, 14);
+	SARLUCN(_19, 0x86);
+	SARLUCN(_21, 0x3fd);
+
+final:
+	*lenp = pos;
+	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
+	return retv;
+}
+
+static int arlan_sysctl_infotxRing(ctl_table * ctl, int write,
+			    void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int i;
+	int retv, pos, devnum;
+	struct arlan_private *priva = NULL;
+
+	pos = 0;
+	devnum = ctl->procname[5] - '0';
+	if (arlan_device[devnum] == NULL)
+	{
+		  pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+		  goto final;
+	}
+	else
+		priva = netdev_priv(arlan_device[devnum]);
+	if (priva == NULL)
+	{
+		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+		return -1;
+	}
+	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+	SARLBNpln(u_char, txBuffer, 0x800);
+final:
+	*lenp = pos;
+	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
+	return retv;
+}
+
+static int arlan_sysctl_inforxRing(ctl_table * ctl, int write,
+			    void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int i;
+	int retv, pos, devnum;
+	struct arlan_private *priva = NULL;
+
+	pos = 0;
+	devnum = ctl->procname[5] - '0';
+	if (arlan_device[devnum] == NULL)
+	{
+		  pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+		  goto final;
+	} else
+		priva = netdev_priv(arlan_device[devnum]);
+	if (priva == NULL)
+	{
+		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+		return -1;
+	}
+	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+	SARLBNpln(u_char, rxBuffer, 0x800);
+final:
+	*lenp = pos;
+	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
+	return retv;
+}
+
+static int arlan_sysctl_info18(ctl_table * ctl, int write,
+			void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int i;
+	int retv, pos, devnum;
+	struct arlan_private *priva = NULL;
+
+	pos = 0;
+	devnum = ctl->procname[5] - '0';
+	if (arlan_device[devnum] == NULL)
+	{
+		pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+		goto final;
+	}
+	else
+		priva = netdev_priv(arlan_device[devnum]);
+	if (priva == NULL)
+	{
+		printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+		return -1;
+	}
+	memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+	SARLBNpln(u_char, _18, 0x800);
+
+final:
+	*lenp = pos;
+	retv = proc_dostring(ctl, write, buffer, lenp, ppos);
+	return retv;
+}
+
+
+#endif				/* #ifdef ARLAN_PROC_SHM_DUMP */
+
+
+static char conf_reset_result[200];
+
+static int arlan_configure(ctl_table * ctl, int write,
+		    void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int pos = 0;
+	int devnum = ctl->procname[6] - '0';
+	struct arlan_private *priv;
+
+	if (devnum < 0 || devnum > MAX_ARLANS - 1)
+	{
+		  printk(KERN_WARNING "too strange devnum in procfs parse\n ");
+		  return -1;
+	}
+	else if (arlan_device[devnum] != NULL)
+	{
+		  priv = netdev_priv(arlan_device[devnum]);
+
+		  arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_CONF);
+	}
+	else
+		return -1;
+
+	*lenp = pos;
+	return proc_dostring(ctl, write, buffer, lenp, ppos);
+}
+
+static int arlan_sysctl_reset(ctl_table * ctl, int write,
+		       void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+	int pos = 0;
+	int devnum = ctl->procname[5] - '0';
+	struct arlan_private *priv;
+
+	if (devnum < 0 || devnum > MAX_ARLANS - 1)
+	{
+		  printk(KERN_WARNING "too strange devnum in procfs parse\n ");
+		  return -1;
+	}
+	else if (arlan_device[devnum] != NULL)
+	{
+		priv = netdev_priv(arlan_device[devnum]);
+		arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_RESET);
+
+	} else
+		return -1;
+	*lenp = pos + 3;
+	return proc_dostring(ctl, write, buffer, lenp, ppos);
+}
+
+
+/* Place files in /proc/sys/dev/arlan */
+#define CTBLN(card,nam) \
+        { .procname = #nam,\
+          .data = &(arlan_conf[card].nam),\
+          .maxlen = sizeof(int), .mode = 0600, .proc_handler = proc_dointvec}
+#ifdef ARLAN_DEBUGGING
+
+#define ARLAN_PROC_DEBUG_ENTRIES \
+        { .procname = "entry_exit_debug",\
+          .data = &arlan_entry_and_exit_debug,\
+          .maxlen = sizeof(int), .mode = 0600, .proc_handler = proc_dointvec},\
+	{ .procname = "debug", .data = &arlan_debug,\
+          .maxlen = sizeof(int), .mode = 0600, .proc_handler = proc_dointvec},
+#else 
+#define ARLAN_PROC_DEBUG_ENTRIES
+#endif
+
+#define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\
+	CTBLN(cardNo,spreadingCode),\
+	CTBLN(cardNo, channelNumber),\
+	CTBLN(cardNo, scramblingDisable),\
+	CTBLN(cardNo, txAttenuation),\
+	CTBLN(cardNo, systemId), \
+	CTBLN(cardNo, maxDatagramSize),\
+	CTBLN(cardNo, maxFrameSize),\
+	CTBLN(cardNo, maxRetries),\
+	CTBLN(cardNo, receiveMode),\
+	CTBLN(cardNo, priority),\
+	CTBLN(cardNo, rootOrRepeater),\
+	CTBLN(cardNo, SID),\
+	CTBLN(cardNo, registrationMode),\
+	CTBLN(cardNo, registrationFill),\
+	CTBLN(cardNo, localTalkAddress),\
+	CTBLN(cardNo, codeFormat),\
+	CTBLN(cardNo, numChannels),\
+	CTBLN(cardNo, channel1),\
+	CTBLN(cardNo, channel2),\
+	CTBLN(cardNo, channel3),\
+	CTBLN(cardNo, channel4),\
+	CTBLN(cardNo, txClear),\
+	CTBLN(cardNo, txRetries),\
+	CTBLN(cardNo, txRouting),\
+	CTBLN(cardNo, txScrambled),\
+	CTBLN(cardNo, rxParameter),\
+	CTBLN(cardNo, txTimeoutMs),\
+	CTBLN(cardNo, waitCardTimeout),\
+	CTBLN(cardNo, channelSet), \
+	{ .procname = "name",\
+	 .data = arlan_conf[cardNo].siteName,\
+	 .maxlen = 16, .mode = 0600, .proc_handler = proc_dostring},\
+	CTBLN(cardNo,waitTime),\
+	CTBLN(cardNo,lParameter),\
+	CTBLN(cardNo,_15),\
+	CTBLN(cardNo,headerSize),\
+	CTBLN(cardNo,tx_delay_ms),\
+	CTBLN(cardNo,retries),\
+	CTBLN(cardNo,ReTransmitPacketMaxSize),\
+	CTBLN(cardNo,waitReTransmitPacketMaxSize),\
+	CTBLN(cardNo,fastReTransCount),\
+	CTBLN(cardNo,driverRetransmissions),\
+	CTBLN(cardNo,txAckTimeoutMs),\
+	CTBLN(cardNo,registrationInterrupts),\
+	CTBLN(cardNo,hardwareType),\
+	CTBLN(cardNo,radioType),\
+	CTBLN(cardNo,writeEEPROM),\
+	CTBLN(cardNo,writeRadioType),\
+	ARLAN_PROC_DEBUG_ENTRIES\
+	CTBLN(cardNo,in_speed),\
+	CTBLN(cardNo,out_speed),\
+	CTBLN(cardNo,in_speed10),\
+	CTBLN(cardNo,out_speed10),\
+	CTBLN(cardNo,in_speed_max),\
+	CTBLN(cardNo,out_speed_max),\
+	CTBLN(cardNo,measure_rate),\
+	CTBLN(cardNo,pre_Command_Wait),\
+	CTBLN(cardNo,rx_tweak1),\
+	CTBLN(cardNo,rx_tweak2),\
+	CTBLN(cardNo,tx_queue_len),\
+
+
+
+static ctl_table arlan_conf_table0[] =
+{
+	ARLAN_SYSCTL_TABLE_TOTAL(0)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+	{
+		.procname	= "arlan0-txRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_infotxRing,
+	},
+	{
+		.procname	= "arlan0-rxRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_inforxRing,
+	},
+	{
+		.procname	= "arlan0-18",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info18,
+	},
+	{
+		.procname	= "arlan0-ring",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info161719,
+	},
+	{
+		.procname	= "arlan0-shm-cpy",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info,
+	},
+#endif
+	{
+		.procname	= "config0",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_configure
+	},
+	{
+		.procname	= "reset0",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_reset,
+	},
+	{  }
+};
+
+static ctl_table arlan_conf_table1[] =
+{
+
+	ARLAN_SYSCTL_TABLE_TOTAL(1)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+	{
+		.procname	= "arlan1-txRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_infotxRing,
+	},
+	{
+		.procname	= "arlan1-rxRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_inforxRing,
+	},
+	{
+		.procname	= "arlan1-18",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info18,
+	},
+	{
+		.procname	= "arlan1-ring",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info161719,
+	},
+	{
+		.procname	= "arlan1-shm-cpy",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info,
+	},
+#endif
+	{
+		.procname	= "config1",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_configure,
+	},
+	{
+		.procname	= "reset1",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_reset,
+	},
+	{ }
+};
+
+static ctl_table arlan_conf_table2[] =
+{
+
+	ARLAN_SYSCTL_TABLE_TOTAL(2)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+	{
+		.procname	= "arlan2-txRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_infotxRing,
+	},
+	{
+		.procname	= "arlan2-rxRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_inforxRing,
+	},
+	{
+		.procname	= "arlan2-18",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info18,
+	},
+	{
+		.procname	= "arlan2-ring",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info161719,
+	},
+	{
+		.procname	= "arlan2-shm-cpy",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info,
+	},
+#endif
+	{
+		.procname	= "config2",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_configure,
+	},
+	{
+		.procname	= "reset2",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_reset,
+	},
+	{ }
+};
+
+static ctl_table arlan_conf_table3[] =
+{
+
+	ARLAN_SYSCTL_TABLE_TOTAL(3)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+	{
+		.procname	= "arlan3-txRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_infotxRing,
+	},
+	{
+		.procname	= "arlan3-rxRing",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_inforxRing,
+	},
+	{
+		.procname	= "arlan3-18",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info18,
+	},
+	{
+		.procname	= "arlan3-ring",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info161719,
+	},
+	{
+		.procname	= "arlan3-shm-cpy",
+		.data		= &arlan_drive_info,
+		.maxlen		= ARLAN_STR_SIZE,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_info,
+	},
+#endif
+	{
+		.procname	= "config3",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_configure,
+	},
+	{
+		.procname	= "reset3",
+		.data		= &conf_reset_result,
+		.maxlen		= 100,
+		.mode		= 0400,
+		.proc_handler	= arlan_sysctl_reset,
+	},
+	{ }
+};
+
+
+
+static ctl_table arlan_table[] =
+{
+	{
+		.procname	= "arlan0",
+		.maxlen		= 0,
+		.mode		= 0600,
+		.child		= arlan_conf_table0,
+	},
+	{
+		.procname	= "arlan1",
+		.maxlen		= 0,
+		.mode		= 0600,
+		.child		= arlan_conf_table1,
+	},
+	{
+		.procname	= "arlan2",
+		.maxlen		= 0,
+		.mode		= 0600,
+		.child		= arlan_conf_table2,
+	},
+	{
+		.procname	= "arlan3",
+		.maxlen		= 0,
+		.mode		= 0600,
+		.child		= arlan_conf_table3,
+	},
+	{ }
+};
+
+#else
+
+static ctl_table arlan_table[] =
+{
+	{ }
+};
+#endif
+
+
+// static int mmtu = 1234;
+
+static ctl_table arlan_root_table[] =
+{
+	{
+		.procname	= "arlan",
+		.maxlen		= 0,
+		.mode		= 0555,
+		.child		= arlan_table,
+	},
+	{  }
+};
+
+
+static struct ctl_table_header *arlan_device_sysctl_header;
+
+int __init init_arlan_proc(void)
+{
+
+	int i = 0;
+	if (arlan_device_sysctl_header)
+		return 0;
+	arlan_device_sysctl_header = register_sysctl_table(arlan_root_table);
+	if (!arlan_device_sysctl_header)
+		return -1;
+
+	return 0;
+
+}
+
+void __exit cleanup_arlan_proc(void)
+{
+	unregister_sysctl_table(arlan_device_sysctl_header);
+	arlan_device_sysctl_header = NULL;
+
+}
+#endif
diff --git a/drivers/net/wireless/arlan.h b/drivers/staging/arlan/arlan.h
similarity index 100%
rename from drivers/net/wireless/arlan.h
rename to drivers/staging/arlan/arlan.h
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index 80c0df8..39923cb 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -141,37 +141,14 @@
 				     struct comedi_insn *insn,
 				     unsigned int *data);
 
-static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link)
-{
-	tuple_t tuple;
-	u_short buf[128];
-	int prodid = 0;
-
-	tuple.TupleData = (cisdata_t *) buf;
-	tuple.TupleOffset = 0;
-	tuple.TupleDataMax = 255;
-	tuple.DesiredTuple = CISTPL_MANFID;
-	tuple.Attributes = TUPLE_RETURN_COMMON;
-	if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
-	    (pcmcia_get_tuple_data(link, &tuple) == 0)) {
-		prodid = le16_to_cpu(buf[1]);
-	}
-
-	return prodid;
-}
-
 static const struct das16cs_board *das16cs_probe(struct comedi_device *dev,
 						 struct pcmcia_device *link)
 {
-	int id;
 	int i;
 
-	id = get_prodid(dev, link);
-
 	for (i = 0; i < n_boards; i++) {
-		if (das16cs_boards[i].device_id == id) {
+		if (das16cs_boards[i].device_id == link->card_id)
 			return das16cs_boards + i;
-		}
 	}
 
 	printk("unknown board!\n");
@@ -660,27 +637,8 @@
 
 ======================================================================*/
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
 #if defined(CONFIG_PCMCIA) || defined(CONFIG_PCMCIA_MODULE)
 
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-    "cb_das16_cs.c pcmcia code (David Schleef), modified from dummy_cs.c 1.31 2001/08/24 12:13:13 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
-
 static void das16cs_pcmcia_config(struct pcmcia_device *link);
 static void das16cs_pcmcia_release(struct pcmcia_device *link);
 static int das16cs_pcmcia_suspend(struct pcmcia_device *p_dev);
@@ -733,7 +691,7 @@
 {
 	struct local_info_t *local;
 
-	DEBUG(0, "das16cs_pcmcia_attach()\n");
+	dev_dbg(&link->dev, "das16cs_pcmcia_attach()\n");
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@@ -745,7 +703,6 @@
 	/* Initialize the pcmcia_device structure */
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	link->conf.Attributes = 0;
@@ -760,7 +717,7 @@
 
 static void das16cs_pcmcia_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "das16cs_pcmcia_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "das16cs_pcmcia_detach\n");
 
 	if (link->dev_node) {
 		((struct local_info_t *)link->priv)->stop = 1;
@@ -771,118 +728,55 @@
 		kfree(link->priv);
 }				/* das16cs_pcmcia_detach */
 
+
+static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	if (cfg->index == 0)
+		return -EINVAL;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		return pcmcia_request_io(p_dev, &p_dev->io);
+	}
+
+	return 0;
+}
+
 static void das16cs_pcmcia_config(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
-	tuple_t tuple;
-	cisparse_t parse;
-	int last_fn, last_ret;
-	u_char buf[64];
-	cistpl_cftable_entry_t dflt = { 0 };
+	int ret;
 
-	DEBUG(0, "das16cs_pcmcia_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "das16cs_pcmcia_config\n");
 
-	/*
-	   This reads the card's CONFIG tuple to find its configuration
-	   registers.
-	 */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	last_fn = GetFirstTuple;
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret != 0)
-		goto cs_failed;
-
-	last_fn = GetTupleData;
-	last_ret = pcmcia_get_tuple_data(link, &tuple);
-	if (last_ret != 0)
-		goto cs_failed;
-
-	last_fn = ParseTuple;
-	last_ret = pcmcia_parse_tuple(&tuple, &parse);
-	if (last_ret != 0)
-		goto cs_failed;
-
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/*
-	   In this loop, we scan the CIS for configuration table entries,
-	   each of which describes a valid card configuration, including
-	   voltage, IO window, memory window, and interrupt settings.
-
-	   We make no assumptions about the card to be configured: we use
-	   just the information available in the CIS.  In an ideal world,
-	   this would work for any PCMCIA card, but it requires a complete
-	   and accurate CIS.  In practice, a driver usually "knows" most of
-	   these things without consulting the CIS, and most client drivers
-	   will only use the CIS to fill in implementation-defined details.
-	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	last_fn = GetFirstTuple;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret)
-		goto cs_failed;
-
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple))
-			goto next_entry;
-		if (pcmcia_parse_tuple(&tuple, &parse))
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-/*	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		link->conf.Attributes |= CONF_ENABLE_SPKR;
-		link->conf.Status = CCSR_AUDIO_ENA;
-	}
-*/
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io))
-				goto next_entry;
-		}
-
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-		last_fn = GetNextTuple;
-
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret)
-			goto cs_failed;
+	ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		goto failed;
 	}
 
 	/*
@@ -891,21 +785,18 @@
 	   irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		last_fn = RequestIRQ;
-
-		last_ret = pcmcia_request_irq(link, &link->irq);
-		if (last_ret)
-			goto cs_failed;
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 	/*
 	   This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	last_fn = RequestConfiguration;
-	last_ret = pcmcia_request_configuration(link, &link->conf);
-	if (last_ret)
-		goto cs_failed;
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/*
 	   At this point, the dev_node_t structure(s) need to be
@@ -930,14 +821,13 @@
 
 	return;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
+failed:
 	das16cs_pcmcia_release(link);
 }				/* das16cs_pcmcia_config */
 
 static void das16cs_pcmcia_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "das16cs_pcmcia_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "das16cs_pcmcia_release\n");
 	pcmcia_disable_device(link);
 }				/* das16cs_pcmcia_release */
 
@@ -983,14 +873,13 @@
 
 static int __init init_das16cs_pcmcia_cs(void)
 {
-	DEBUG(0, "%s\n", version);
 	pcmcia_register_driver(&das16cs_driver);
 	return 0;
 }
 
 static void __exit exit_das16cs_pcmcia_cs(void)
 {
-	DEBUG(0, "das16cs_pcmcia_cs: unloading\n");
+	pr_debug("das16cs_pcmcia_cs: unloading\n");
 	pcmcia_unregister_driver(&das16cs_driver);
 }
 
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index 9cab21e..9b945e5 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -110,25 +110,6 @@
 
 ======================================================================*/
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static const char *version =
-    "das08.c pcmcia code (Frank Hess), modified from dummy_cs.c 1.31 2001/08/24 12:13:13 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
 static void das08_pcmcia_config(struct pcmcia_device *link);
 static void das08_pcmcia_release(struct pcmcia_device *link);
 static int das08_pcmcia_suspend(struct pcmcia_device *p_dev);
@@ -181,7 +162,7 @@
 {
 	struct local_info_t *local;
 
-	DEBUG(0, "das08_pcmcia_attach()\n");
+	dev_dbg(&link->dev, "das08_pcmcia_attach()\n");
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@@ -192,7 +173,6 @@
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/*
@@ -224,7 +204,7 @@
 static void das08_pcmcia_detach(struct pcmcia_device *link)
 {
 
-	DEBUG(0, "das08_pcmcia_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "das08_pcmcia_detach\n");
 
 	if (link->dev_node) {
 		((struct local_info_t *)link->priv)->stop = 1;
@@ -237,6 +217,44 @@
 
 }				/* das08_pcmcia_detach */
 
+
+static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		return pcmcia_request_io(p_dev, &p_dev->io);
+	}
+	return 0;
+}
+
+
 /*======================================================================
 
     das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event
@@ -248,128 +266,20 @@
 static void das08_pcmcia_config(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
-	tuple_t tuple;
-	cisparse_t parse;
-	int last_fn, last_ret;
-	u_char buf[64];
-	cistpl_cftable_entry_t dflt = { 0 };
+	int ret;
 
-	DEBUG(0, "das08_pcmcia_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "das08_pcmcia_config\n");
 
-	/*
-	   This reads the card's CONFIG tuple to find its configuration
-	   registers.
-	 */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-	last_fn = GetFirstTuple;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret)
-		goto cs_failed;
-
-	last_fn = GetTupleData;
-
-	last_ret = pcmcia_get_tuple_data(link, &tuple);
-	if (last_ret)
-		goto cs_failed;
-
-	last_fn = ParseTuple;
-
-	last_ret = pcmcia_parse_tuple(&tuple, &parse);
-	if (last_ret)
-		goto cs_failed;
-
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/*
-	   In this loop, we scan the CIS for configuration table entries,
-	   each of which describes a valid card configuration, including
-	   voltage, IO window, memory window, and interrupt settings.
-
-	   We make no assumptions about the card to be configured: we use
-	   just the information available in the CIS.  In an ideal world,
-	   this would work for any PCMCIA card, but it requires a complete
-	   and accurate CIS.  In practice, a driver usually "knows" most of
-	   these things without consulting the CIS, and most client drivers
-	   will only use the CIS to fill in implementation-defined details.
-	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	last_fn = GetFirstTuple;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret)
-		goto cs_failed;
-
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-
-		last_ret = pcmcia_get_tuple_data(link, &tuple);
-		if (last_ret)
-			goto next_entry;
-
-		last_ret = pcmcia_parse_tuple(&tuple, &parse);
-		if (last_ret)
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-/*	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-		link->conf.Attributes |= CONF_ENABLE_SPKR;
-		link->conf.Status = CCSR_AUDIO_ENA;
-	}
-*/
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io) != 0)
-				goto next_entry;
-		}
-
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-		last_fn = GetNextTuple;
-
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret)
-			goto cs_failed;
+	ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		goto failed;
 	}
 
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		last_fn = RequestIRQ;
-		last_ret = pcmcia_request_irq(link, &link->irq);
-		if (last_ret)
-			goto cs_failed;
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 
 	/*
@@ -377,10 +287,9 @@
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	last_fn = RequestConfiguration;
-	last_ret = pcmcia_request_configuration(link, &link->conf);
-	if (last_ret)
-		goto cs_failed;
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/*
 	   At this point, the dev_node_t structure(s) need to be
@@ -405,8 +314,7 @@
 
 	return;
 
-cs_failed:
-	cs_error(link, last_fn, last_ret);
+failed:
 	das08_pcmcia_release(link);
 
 }				/* das08_pcmcia_config */
@@ -421,7 +329,7 @@
 
 static void das08_pcmcia_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "das08_pcmcia_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "das08_pcmcia_release\n");
 	pcmcia_disable_device(link);
 }				/* das08_pcmcia_release */
 
@@ -477,14 +385,13 @@
 
 static int __init init_das08_pcmcia_cs(void)
 {
-	DEBUG(0, "%s\n", version);
 	pcmcia_register_driver(&das08_cs_driver);
 	return 0;
 }
 
 static void __exit exit_das08_pcmcia_cs(void)
 {
-	DEBUG(0, "das08_pcmcia_cs: unloading\n");
+	pr_debug("das08_pcmcia_cs: unloading\n");
 	pcmcia_unregister_driver(&das08_cs_driver);
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index ec31a39..ef5e118 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -436,25 +436,7 @@
 	return 0;
 };
 
-/* PCMCIA crap */
-
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "ni_daq_700.c, based on dummy_cs.c";
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
+/* PCMCIA crap -- watch your words, please! */
 
 static void dio700_config(struct pcmcia_device *link);
 static void dio700_release(struct pcmcia_device *link);
@@ -510,7 +492,7 @@
 
 	printk(KERN_INFO "ni_daq_700:  cs-attach\n");
 
-	DEBUG(0, "dio700_cs_attach()\n");
+	dev_dbg(&link->dev, "dio700_cs_attach()\n");
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@@ -521,7 +503,6 @@
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/*
@@ -555,7 +536,7 @@
 
 	printk(KERN_INFO "ni_daq_700: cs-detach!\n");
 
-	DEBUG(0, "dio700_cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "dio700_cs_detach\n");
 
 	if (link->dev_node) {
 		((struct local_info_t *)link->priv)->stop = 1;
@@ -576,141 +557,85 @@
 
 ======================================================================*/
 
+static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	win_req_t *req = priv_data;
+	memreq_t map;
+
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			return -ENODEV;
+	}
+
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem =
+			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
+		req->Attributes |= WIN_ENABLE;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		if (req->Size < 0x1000)
+			req->Size = 0x1000;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(p_dev, req, &p_dev->win))
+			return -ENODEV;
+		map.Page = 0;
+		map.CardOffset = mem->win[0].card_addr;
+		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
+			return -ENODEV;
+	}
+	/* If we got this far, we're cool! */
+	return 0;
+}
+
 static void dio700_config(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
-	tuple_t tuple;
-	cisparse_t parse;
-	int last_ret;
-	u_char buf[64];
 	win_req_t req;
-	memreq_t map;
-	cistpl_cftable_entry_t dflt = { 0 };
+	int ret;
 
 	printk(KERN_INFO "ni_daq_700:  cs-config\n");
 
-	DEBUG(0, "dio700_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "dio700_config\n");
 
-	/*
-	   This reads the card's CONFIG tuple to find its configuration
-	   registers.
-	 */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_get_tuple_data(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetTupleData, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_parse_tuple(&tuple, &parse);
-	if (last_ret) {
-		cs_error(link, ParseTuple, last_ret);
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/*
-	   In this loop, we scan the CIS for configuration table entries,
-	   each of which describes a valid card configuration, including
-	   voltage, IO window, memory window, and interrupt settings.
-
-	   We make no assumptions about the card to be configured: we use
-	   just the information available in the CIS.  In an ideal world,
-	   this would work for any PCMCIA card, but it requires a complete
-	   and accurate CIS.  In practice, a driver usually "knows" most of
-	   these things without consulting the CIS, and most client drivers
-	   will only use the CIS to fill in implementation-defined details.
-	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret != 0) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple) != 0)
-			goto next_entry;
-		if (pcmcia_parse_tuple(&tuple, &parse) != 0)
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io) != 0)
-				goto next_entry;
-		}
-
-		if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-			cistpl_mem_t *mem =
-			    (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-			req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-			req.Attributes |= WIN_ENABLE;
-			req.Base = mem->win[0].host_addr;
-			req.Size = mem->win[0].len;
-			if (req.Size < 0x1000)
-				req.Size = 0x1000;
-			req.AccessSpeed = 0;
-			if (pcmcia_request_window(&link, &req, &link->win))
-				goto next_entry;
-			map.Page = 0;
-			map.CardOffset = mem->win[0].card_addr;
-			if (pcmcia_map_mem_page(link->win, &map))
-				goto next_entry;
-		}
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret) {
-			cs_error(link, GetNextTuple, last_ret);
-			goto cs_failed;
-		}
+	ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, &req);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		goto failed;
 	}
 
 	/*
@@ -719,11 +644,9 @@
 	   irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		last_ret = pcmcia_request_irq(link, &link->irq);
-		if (last_ret) {
-			cs_error(link, RequestIRQ, last_ret);
-			goto cs_failed;
-		}
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 
 	/*
@@ -731,11 +654,9 @@
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	last_ret = pcmcia_request_configuration(link, &link->conf);
-	if (last_ret != 0) {
-		cs_error(link, RequestConfiguration, last_ret);
-		goto cs_failed;
-	}
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret != 0)
+		goto failed;
 
 	/*
 	   At this point, the dev_node_t structure(s) need to be
@@ -763,7 +684,7 @@
 
 	return;
 
-cs_failed:
+failed:
 	printk(KERN_INFO "ni_daq_700 cs failed");
 	dio700_release(link);
 
@@ -771,7 +692,7 @@
 
 static void dio700_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "dio700_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "dio700_release\n");
 
 	pcmcia_disable_device(link);
 }				/* dio700_release */
@@ -830,15 +751,13 @@
 
 static int __init init_dio700_cs(void)
 {
-	printk("ni_daq_700:  cs-init \n");
-	DEBUG(0, "%s\n", version);
 	pcmcia_register_driver(&dio700_cs_driver);
 	return 0;
 }
 
 static void __exit exit_dio700_cs(void)
 {
-	DEBUG(0, "ni_daq_700: unloading\n");
+	pr_debug("ni_daq_700: unloading\n");
 	pcmcia_unregister_driver(&dio700_cs_driver);
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 0700a8b..9017be3 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -187,25 +187,7 @@
 	return 0;
 };
 
-/* PCMCIA crap */
-
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "ni_daq_dio24.c, based on dummy_cs.c";
-#else
-#define DEBUG(n, args...)
-#endif
-
-/*====================================================================*/
+/* PCMCIA crap -- watch your words! */
 
 static void dio24_config(struct pcmcia_device *link);
 static void dio24_release(struct pcmcia_device *link);
@@ -261,7 +243,7 @@
 
 	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - CS-attach!\n");
 
-	DEBUG(0, "dio24_cs_attach()\n");
+	dev_dbg(&link->dev, "dio24_cs_attach()\n");
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@@ -272,7 +254,6 @@
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	/*
@@ -306,7 +287,7 @@
 
 	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO - cs-detach!\n");
 
-	DEBUG(0, "dio24_cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "dio24_cs_detach\n");
 
 	if (link->dev_node) {
 		((struct local_info_t *)link->priv)->stop = 1;
@@ -327,142 +308,85 @@
 
 ======================================================================*/
 
+static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	win_req_t *req = priv_data;
+	memreq_t map;
+
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			return -ENODEV;
+	}
+
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem =
+			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
+		req->Attributes |= WIN_ENABLE;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		if (req->Size < 0x1000)
+			req->Size = 0x1000;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(p_dev, req, &p_dev->win))
+			return -ENODEV;
+		map.Page = 0;
+		map.CardOffset = mem->win[0].card_addr;
+		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
+			return -ENODEV;
+	}
+	/* If we got this far, we're cool! */
+	return 0;
+}
+
 static void dio24_config(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
-	tuple_t tuple;
-	cisparse_t parse;
-	int last_ret;
-	u_char buf[64];
+	int ret;
 	win_req_t req;
-	memreq_t map;
-	cistpl_cftable_entry_t dflt = { 0 };
 
 	printk(KERN_INFO "ni_daq_dio24: HOLA SOY YO! - config\n");
 
-	DEBUG(0, "dio24_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "dio24_config\n");
 
-	/*
-	   This reads the card's CONFIG tuple to find its configuration
-	   registers.
-	 */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_get_tuple_data(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetTupleData, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_parse_tuple(&tuple, &parse);
-	if (last_ret) {
-		cs_error(link, ParseTuple, last_ret);
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/*
-	   In this loop, we scan the CIS for configuration table entries,
-	   each of which describes a valid card configuration, including
-	   voltage, IO window, memory window, and interrupt settings.
-
-	   We make no assumptions about the card to be configured: we use
-	   just the information available in the CIS.  In an ideal world,
-	   this would work for any PCMCIA card, but it requires a complete
-	   and accurate CIS.  In practice, a driver usually "knows" most of
-	   these things without consulting the CIS, and most client drivers
-	   will only use the CIS to fill in implementation-defined details.
-	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple) != 0)
-			goto next_entry;
-		if (pcmcia_parse_tuple(&tuple, &parse) != 0)
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io) != 0)
-				goto next_entry;
-		}
-
-		if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-			cistpl_mem_t *mem =
-			    (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-			req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-			req.Attributes |= WIN_ENABLE;
-			req.Base = mem->win[0].host_addr;
-			req.Size = mem->win[0].len;
-			if (req.Size < 0x1000)
-				req.Size = 0x1000;
-			req.AccessSpeed = 0;
-			if (pcmcia_request_window(&link, &req, &link->win))
-				goto next_entry;
-			map.Page = 0;
-			map.CardOffset = mem->win[0].card_addr;
-			if (pcmcia_map_mem_page(link->win, &map))
-				goto next_entry;
-		}
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret) {
-			cs_error(link, GetNextTuple, last_ret);
-			goto cs_failed;
-		}
+	ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, &req);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		goto failed;
 	}
 
 	/*
@@ -471,11 +395,9 @@
 	   irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		last_ret = pcmcia_request_irq(link, &link->irq);
-		if (last_ret) {
-			cs_error(link, RequestIRQ, last_ret);
-			goto cs_failed;
-		}
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 
 	/*
@@ -483,11 +405,9 @@
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	last_ret = pcmcia_request_configuration(link, &link->conf);
-	if (last_ret) {
-		cs_error(link, RequestConfiguration, last_ret);
-		goto cs_failed;
-	}
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/*
 	   At this point, the dev_node_t structure(s) need to be
@@ -515,7 +435,7 @@
 
 	return;
 
-cs_failed:
+failed:
 	printk(KERN_INFO "Fallo");
 	dio24_release(link);
 
@@ -523,7 +443,7 @@
 
 static void dio24_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "dio24_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "dio24_release\n");
 
 	pcmcia_disable_device(link);
 }				/* dio24_release */
@@ -582,14 +502,12 @@
 static int __init init_dio24_cs(void)
 {
 	printk("ni_daq_dio24: HOLA SOY YO!\n");
-	DEBUG(0, "%s\n", version);
 	pcmcia_register_driver(&dio24_cs_driver);
 	return 0;
 }
 
 static void __exit exit_dio24_cs(void)
 {
-	DEBUG(0, "ni_dio24: unloading\n");
 	pcmcia_unregister_driver(&dio24_cs_driver);
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index a3053b8..7d514b3 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -153,23 +153,6 @@
 	return labpc_common_attach(dev, iobase, irq, 0);
 }
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static const char *version =
-    "ni_labpc.c, based on dummy_cs.c 1.31 2001/08/24 12:13:13";
-#else
-#define DEBUG(n, args...)
-#endif
-
 /*====================================================================*/
 
 /*
@@ -236,7 +219,7 @@
 {
 	struct local_info_t *local;
 
-	DEBUG(0, "labpc_cs_attach()\n");
+	dev_dbg(&link->dev, "labpc_cs_attach()\n");
 
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(struct local_info_t), GFP_KERNEL);
@@ -247,7 +230,6 @@
 
 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_PULSE_ID;
 	link->irq.Handler = NULL;
 
 	/*
@@ -278,7 +260,7 @@
 
 static void labpc_cs_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "labpc_cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "labpc_cs_detach\n");
 
 	/*
 	   If the device is currently configured and active, we won't
@@ -305,135 +287,84 @@
 
 ======================================================================*/
 
+static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	win_req_t *req = priv_data;
+	memreq_t map;
+
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Does this card need audio output? */
+	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->conf.Status = CCSR_AUDIO_ENA;
+	}
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+		/* This reserves IO space but doesn't actually enable it */
+		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+			return -ENODEV;
+	}
+
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem =
+			(cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+		req->Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
+		req->Attributes |= WIN_ENABLE;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		if (req->Size < 0x1000)
+			req->Size = 0x1000;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(p_dev, req, &p_dev->win))
+			return -ENODEV;
+		map.Page = 0;
+		map.CardOffset = mem->win[0].card_addr;
+		if (pcmcia_map_mem_page(p_dev, p_dev->win, &map))
+			return -ENODEV;
+	}
+	/* If we got this far, we're cool! */
+	return 0;
+}
+
+
 static void labpc_config(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
-	tuple_t tuple;
-	cisparse_t parse;
-	int last_ret;
-	u_char buf[64];
+	int ret;
 	win_req_t req;
-	memreq_t map;
-	cistpl_cftable_entry_t dflt = { 0 };
 
-	DEBUG(0, "labpc_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "labpc_config\n");
 
-	/*
-	   This reads the card's CONFIG tuple to find its configuration
-	   registers.
-	 */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_get_tuple_data(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetTupleData, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_parse_tuple(&tuple, &parse);
-	if (last_ret) {
-		cs_error(link, ParseTuple, last_ret);
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/*
-	   In this loop, we scan the CIS for configuration table entries,
-	   each of which describes a valid card configuration, including
-	   voltage, IO window, memory window, and interrupt settings.
-
-	   We make no assumptions about the card to be configured: we use
-	   just the information available in the CIS.  In an ideal world,
-	   this would work for any PCMCIA card, but it requires a complete
-	   and accurate CIS.  In practice, a driver usually "knows" most of
-	   these things without consulting the CIS, and most client drivers
-	   will only use the CIS to fill in implementation-defined details.
-	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-	while (1) {
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple))
-			goto next_entry;
-		if (pcmcia_parse_tuple(&tuple, &parse))
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Does this card need audio output? */
-		if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
-			link->conf.Attributes |= CONF_ENABLE_SPKR;
-			link->conf.Status = CCSR_AUDIO_ENA;
-		}
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-			/* This reserves IO space but doesn't actually enable it */
-			if (pcmcia_request_io(link, &link->io))
-				goto next_entry;
-		}
-
-		if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
-			cistpl_mem_t *mem =
-			    (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
-			req.Attributes = WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM;
-			req.Attributes |= WIN_ENABLE;
-			req.Base = mem->win[0].host_addr;
-			req.Size = mem->win[0].len;
-			if (req.Size < 0x1000)
-				req.Size = 0x1000;
-			req.AccessSpeed = 0;
-			link->win = (window_handle_t) link;
-			if (pcmcia_request_window(&link, &req, &link->win))
-				goto next_entry;
-			map.Page = 0;
-			map.CardOffset = mem->win[0].card_addr;
-			if (pcmcia_map_mem_page(link->win, &map))
-				goto next_entry;
-		}
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret) {
-			cs_error(link, GetNextTuple, last_ret);
-			goto cs_failed;
-		}
+	ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, &req);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		goto failed;
 	}
 
 	/*
@@ -442,11 +373,9 @@
 	   irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		last_ret = pcmcia_request_irq(link, &link->irq);
-		if (last_ret) {
-			cs_error(link, RequestIRQ, last_ret);
-			goto cs_failed;
-		}
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 
 	/*
@@ -454,11 +383,9 @@
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	last_ret = pcmcia_request_configuration(link, &link->conf);
-	if (last_ret) {
-		cs_error(link, RequestConfiguration, last_ret);
-		goto cs_failed;
-	}
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/*
 	   At this point, the dev_node_t structure(s) need to be
@@ -486,14 +413,14 @@
 
 	return;
 
-cs_failed:
+failed:
 	labpc_release(link);
 
 }				/* labpc_config */
 
 static void labpc_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "labpc_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "labpc_release\n");
 
 	pcmcia_disable_device(link);
 }				/* labpc_release */
@@ -551,14 +478,12 @@
 
 static int __init init_labpc_cs(void)
 {
-	DEBUG(0, "%s\n", version);
 	pcmcia_register_driver(&labpc_cs_driver);
 	return 0;
 }
 
 static void __exit exit_labpc_cs(void)
 {
-	DEBUG(0, "ni_labpc: unloading\n");
 	pcmcia_unregister_driver(&labpc_cs_driver);
 }
 
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c
index 9aef87f..d692f4b 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -274,7 +274,6 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 	link->io.NumPorts1 = 16;
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
@@ -312,96 +311,47 @@
 	return 0;
 }
 
+
+static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	int base, ret;
+
+	p_dev->io.NumPorts1 = cfg->io.win[0].len;
+	p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+	p_dev->io.NumPorts2 = 0;
+
+	for (base = 0x000; base < 0x400; base += 0x20) {
+		p_dev->io.BasePort1 = base;
+		ret = pcmcia_request_io(p_dev, &p_dev->io);
+		if (!ret)
+			return 0;
+	}
+	return -ENODEV;
+}
+
+
 static void mio_cs_config(struct pcmcia_device *link)
 {
-	tuple_t tuple;
-	u_short buf[128];
-	cisparse_t parse;
-	int manfid = 0, prodid = 0;
 	int ret;
 
 	DPRINTK("mio_cs_config(link=%p)\n", link);
 
-	tuple.TupleData = (cisdata_t *) buf;
-	tuple.TupleOffset = 0;
-	tuple.TupleDataMax = 255;
-	tuple.Attributes = 0;
-
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	ret = pcmcia_get_first_tuple(link, &tuple);
-	ret = pcmcia_get_tuple_data(link, &tuple);
-	ret = pcmcia_parse_tuple(&tuple, &parse);
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-#if 0
-	tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
-	tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
-	info->multi(first_tuple(link, &tuple, &parse) == 0);
-#endif
-
-	tuple.DesiredTuple = CISTPL_MANFID;
-	tuple.Attributes = TUPLE_RETURN_COMMON;
-	if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
-	    (pcmcia_get_tuple_data(link, &tuple) == 0)) {
-		manfid = le16_to_cpu(buf[0]);
-		prodid = le16_to_cpu(buf[1]);
-	}
-	/* printk("manfid = 0x%04x, 0x%04x\n",manfid,prodid); */
-
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	tuple.Attributes = 0;
-	ret = pcmcia_get_first_tuple(link, &tuple);
-	ret = pcmcia_get_tuple_data(link, &tuple);
-	ret = pcmcia_parse_tuple(&tuple, &parse);
-
-#if 0
-	printk(" index: 0x%x\n", parse.cftable_entry.index);
-	printk(" flags: 0x%x\n", parse.cftable_entry.flags);
-	printk(" io flags: 0x%x\n", parse.cftable_entry.io.flags);
-	printk(" io nwin: 0x%x\n", parse.cftable_entry.io.nwin);
-	printk(" io base: 0x%x\n", parse.cftable_entry.io.win[0].base);
-	printk(" io len: 0x%x\n", parse.cftable_entry.io.win[0].len);
-	printk(" irq1: 0x%x\n", parse.cftable_entry.irq.IRQInfo1);
-	printk(" irq2: 0x%x\n", parse.cftable_entry.irq.IRQInfo2);
-	printk(" mem flags: 0x%x\n", parse.cftable_entry.mem.flags);
-	printk(" mem nwin: 0x%x\n", parse.cftable_entry.mem.nwin);
-	printk(" subtuples: 0x%x\n", parse.cftable_entry.subtuples);
-#endif
-
-#if 0
-	link->io.NumPorts1 = 0x20;
-	link->io.IOAddrLines = 5;
-	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-#endif
-	link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
-	link->io.IOAddrLines =
-	    parse.cftable_entry.io.flags & CISTPL_IO_LINES_MASK;
-	link->io.NumPorts2 = 0;
-
-	{
-		int base;
-		for (base = 0x000; base < 0x400; base += 0x20) {
-			link->io.BasePort1 = base;
-			ret = pcmcia_request_io(link, &link->io);
-			/* printk("RequestIO 0x%02x\n",ret); */
-			if (!ret)
-				break;
-		}
+	ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		return;
 	}
 
-	link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1;
-	link->irq.IRQInfo2 = parse.cftable_entry.irq.IRQInfo2;
 	ret = pcmcia_request_irq(link, &link->irq);
 	if (ret) {
 		printk("pcmcia_request_irq() returned error: %i\n", ret);
 	}
-	/* printk("RequestIRQ 0x%02x\n",ret); */
-
-	link->conf.ConfigIndex = 1;
 
 	ret = pcmcia_request_configuration(link, &link->conf);
-	/* printk("RequestConfiguration %d\n",ret); */
 
 	link->dev_node = &dev_node;
 }
@@ -475,40 +425,17 @@
 	return 0;
 }
 
-static int get_prodid(struct comedi_device *dev, struct pcmcia_device *link)
-{
-	tuple_t tuple;
-	u_short buf[128];
-	int prodid = 0;
-
-	tuple.TupleData = (cisdata_t *) buf;
-	tuple.TupleOffset = 0;
-	tuple.TupleDataMax = 255;
-	tuple.DesiredTuple = CISTPL_MANFID;
-	tuple.Attributes = TUPLE_RETURN_COMMON;
-	if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
-	    (pcmcia_get_tuple_data(link, &tuple) == 0)) {
-		prodid = le16_to_cpu(buf[1]);
-	}
-
-	return prodid;
-}
-
 static int ni_getboardtype(struct comedi_device *dev,
 			   struct pcmcia_device *link)
 {
-	int id;
 	int i;
 
-	id = get_prodid(dev, link);
-
 	for (i = 0; i < n_ni_boards; i++) {
-		if (ni_boards[i].device_id == id) {
+		if (ni_boards[i].device_id == link->card_id)
 			return i;
-		}
 	}
 
-	printk("unknown board 0x%04x -- pretend it is a ", id);
+	printk("unknown board 0x%04x -- pretend it is a ", link->card_id);
 
 	return 0;
 }
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index 344b823..5256fd9 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -55,23 +55,6 @@
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
 
-/*
-   All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If
-   you do not define PCMCIA_DEBUG at all, all the debug code will be
-   left out.  If you compile with PCMCIA_DEBUG=0, the debug code will
-   be present but disabled -- but it can then be enabled for specific
-   modules at load time with a 'pc_debug=#' option to insmod.
-*/
-
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version = "quatech_daqp_cs.c 1.10 2003/04/21 (Brent Baccala)";
-#else
-#define DEBUG(n, args...)
-#endif
-
 /* Maximum number of separate DAQP devices we'll allow */
 #define MAX_DEV         4
 
@@ -863,8 +846,6 @@
 {
 	int ret;
 	struct local_info_t *local = dev_table[it->options[0]];
-	tuple_t tuple;
-	int i;
 	struct comedi_subdevice *s;
 
 	if (it->options[0] < 0 || it->options[0] >= MAX_DEV || !local) {
@@ -883,29 +864,10 @@
 
 	strcpy(local->board_name, "DAQP");
 	dev->board_name = local->board_name;
-
-	tuple.DesiredTuple = CISTPL_VERS_1;
-	if (pcmcia_get_first_tuple(local->link, &tuple) == 0) {
-		u_char buf[128];
-
-		buf[0] = buf[sizeof(buf) - 1] = 0;
-		tuple.TupleData = buf;
-		tuple.TupleDataMax = sizeof(buf);
-		tuple.TupleOffset = 2;
-		if (pcmcia_get_tuple_data(local->link, &tuple) == 0) {
-
-			for (i = 0; i < tuple.TupleDataLen - 4; i++)
-				if (buf[i] == 0)
-					break;
-			for (i++; i < tuple.TupleDataLen - 4; i++)
-				if (buf[i] == 0)
-					break;
-			i++;
-			if ((i < tuple.TupleDataLen - 4)
-			    && (strncmp(buf + i, "DAQP", 4) == 0)) {
-				strncpy(local->board_name, buf + i,
-					sizeof(local->board_name));
-			}
+	if (local->link->prod_id[2]) {
+		if (strncmp(local->link->prod_id[2], "DAQP", 4) == 0) {
+			strncpy(local->board_name, local->link->prod_id[2],
+				sizeof(local->board_name));
 		}
 	}
 
@@ -1058,7 +1020,7 @@
 	struct local_info_t *local;
 	int i;
 
-	DEBUG(0, "daqp_cs_attach()\n");
+	dev_dbg(&link->dev, "daqp_cs_attach()\n");
 
 	for (i = 0; i < MAX_DEV; i++)
 		if (dev_table[i] == NULL)
@@ -1079,10 +1041,8 @@
 	link->priv = local;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
 	link->irq.Handler = daqp_interrupt;
-	link->irq.Instance = local;
 
 	/*
 	   General socket configuration defaults can go here.  In this
@@ -1112,7 +1072,7 @@
 {
 	struct local_info_t *dev = link->priv;
 
-	DEBUG(0, "daqp_cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "daqp_cs_detach\n");
 
 	if (link->dev_node) {
 		dev->stop = 1;
@@ -1134,115 +1094,54 @@
 
 ======================================================================*/
 
+
+static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev,
+				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
+				unsigned int vcc,
+				void *priv_data)
+{
+	if (cfg->index == 0)
+		return -ENODEV;
+
+	/* Do we need to allocate an interrupt? */
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+	/* IO window settings */
+	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+		if (!(io->flags & CISTPL_IO_8BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+		if (!(io->flags & CISTPL_IO_16BIT))
+			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+		p_dev->io.BasePort1 = io->win[0].base;
+		p_dev->io.NumPorts1 = io->win[0].len;
+		if (io->nwin > 1) {
+			p_dev->io.Attributes2 = p_dev->io.Attributes1;
+			p_dev->io.BasePort2 = io->win[1].base;
+			p_dev->io.NumPorts2 = io->win[1].len;
+		}
+	}
+
+	/* This reserves IO space but doesn't actually enable it */
+	return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
 static void daqp_cs_config(struct pcmcia_device *link)
 {
 	struct local_info_t *dev = link->priv;
-	tuple_t tuple;
-	cisparse_t parse;
-	int last_ret;
-	u_char buf[64];
+	int ret;
 
-	DEBUG(0, "daqp_cs_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "daqp_cs_config\n");
 
-	/*
-	   This reads the card's CONFIG tuple to find its configuration
-	   registers.
-	 */
-	tuple.DesiredTuple = CISTPL_CONFIG;
-	tuple.Attributes = 0;
-	tuple.TupleData = buf;
-	tuple.TupleDataMax = sizeof(buf);
-	tuple.TupleOffset = 0;
-
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_get_tuple_data(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetTupleData, last_ret);
-		goto cs_failed;
-	}
-
-	last_ret = pcmcia_parse_tuple(&tuple, &parse);
-	if (last_ret) {
-		cs_error(link, ParseTuple, last_ret);
-		goto cs_failed;
-	}
-	link->conf.ConfigBase = parse.config.base;
-	link->conf.Present = parse.config.rmask[0];
-
-	/*
-	   In this loop, we scan the CIS for configuration table entries,
-	   each of which describes a valid card configuration, including
-	   voltage, IO window, memory window, and interrupt settings.
-
-	   We make no assumptions about the card to be configured: we use
-	   just the information available in the CIS.  In an ideal world,
-	   this would work for any PCMCIA card, but it requires a complete
-	   and accurate CIS.  In practice, a driver usually "knows" most of
-	   these things without consulting the CIS, and most client drivers
-	   will only use the CIS to fill in implementation-defined details.
-	 */
-	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-	last_ret = pcmcia_get_first_tuple(link, &tuple);
-	if (last_ret) {
-		cs_error(link, GetFirstTuple, last_ret);
-		goto cs_failed;
-	}
-
-	while (1) {
-		cistpl_cftable_entry_t dflt = { 0 };
-		cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-		if (pcmcia_get_tuple_data(link, &tuple))
-			goto next_entry;
-		if (pcmcia_parse_tuple(&tuple, &parse))
-			goto next_entry;
-
-		if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-			dflt = *cfg;
-		if (cfg->index == 0)
-			goto next_entry;
-		link->conf.ConfigIndex = cfg->index;
-
-		/* Do we need to allocate an interrupt? */
-		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
-			link->conf.Attributes |= CONF_ENABLE_IRQ;
-
-		/* IO window settings */
-		link->io.NumPorts1 = link->io.NumPorts2 = 0;
-		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
-			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-			link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-			if (!(io->flags & CISTPL_IO_8BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
-			if (!(io->flags & CISTPL_IO_16BIT))
-				link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-			link->io.BasePort1 = io->win[0].base;
-			link->io.NumPorts1 = io->win[0].len;
-			if (io->nwin > 1) {
-				link->io.Attributes2 = link->io.Attributes1;
-				link->io.BasePort2 = io->win[1].base;
-				link->io.NumPorts2 = io->win[1].len;
-			}
-		}
-
-		/* This reserves IO space but doesn't actually enable it */
-		if (pcmcia_request_io(link, &link->io))
-			goto next_entry;
-
-		/* If we got this far, we're cool! */
-		break;
-
-next_entry:
-		last_ret = pcmcia_get_next_tuple(link, &tuple);
-		if (last_ret) {
-			cs_error(link, GetNextTuple, last_ret);
-			goto cs_failed;
-		}
+	ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL);
+	if (ret) {
+		dev_warn(&link->dev, "no configuration found\n");
+		goto failed;
 	}
 
 	/*
@@ -1251,11 +1150,9 @@
 	   irq structure is initialized.
 	 */
 	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-		last_ret = pcmcia_request_irq(link, &link->irq);
-		if (last_ret) {
-			cs_error(link, RequestIRQ, last_ret);
-			goto cs_failed;
-		}
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
 	}
 
 	/*
@@ -1263,11 +1160,9 @@
 	   the I/O windows and the interrupt mapping, and putting the
 	   card and host interface into "Memory and IO" mode.
 	 */
-	last_ret = pcmcia_request_configuration(link, &link->conf);
-	if (last_ret) {
-		cs_error(link, RequestConfiguration, last_ret);
-		goto cs_failed;
-	}
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	/*
 	   At this point, the dev_node_t structure(s) need to be
@@ -1296,14 +1191,14 @@
 
 	return;
 
-cs_failed:
+failed:
 	daqp_cs_release(link);
 
 }				/* daqp_cs_config */
 
 static void daqp_cs_release(struct pcmcia_device *link)
 {
-	DEBUG(0, "daqp_cs_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "daqp_cs_release\n");
 
 	pcmcia_disable_device(link);
 }				/* daqp_cs_release */
@@ -1363,7 +1258,6 @@
 
 int __init init_module(void)
 {
-	DEBUG(0, "%s\n", version);
 	pcmcia_register_driver(&daqp_cs_driver);
 	comedi_driver_register(&driver_daqp);
 	return 0;
@@ -1371,7 +1265,6 @@
 
 void __exit cleanup_module(void)
 {
-	DEBUG(0, "daqp_cs: unloading\n");
 	comedi_driver_unregister(&driver_daqp);
 	pcmcia_unregister_driver(&daqp_cs_driver);
 }
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c
index 8c85a9c..f4a6541 100644
--- a/drivers/staging/go7007/s2250-board.c
+++ b/drivers/staging/go7007/s2250-board.c
@@ -261,7 +261,7 @@
 
 	memset(buf, 0xcd, 6);
 	usb = go->hpi_context;
-	if (down_interruptible(&usb->i2c_lock) != 0) {
+	if (mutex_lock_interruptible(&usb->i2c_lock) != 0) {
 		printk(KERN_INFO "i2c lock failed\n");
 		kfree(buf);
 		return -EINTR;
@@ -270,7 +270,7 @@
 		kfree(buf);
 		return -EFAULT;
 	}
-	up(&usb->i2c_lock);
+	mutex_unlock(&usb->i2c_lock);
 
 	*val = (buf[0] << 8) | buf[1];
 	kfree(buf);
diff --git a/drivers/staging/go7007/s2250-loader.h b/drivers/staging/go7007/s2250-loader.h
new file mode 100644
index 0000000..b7c301a
--- /dev/null
+++ b/drivers/staging/go7007/s2250-loader.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2005-2006 Micronas USA Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+
+#ifndef _S2250_LOADER_H_
+#define _S2250_LOADER_H_
+
+extern int s2250loader_init(void);
+extern void s2250loader_cleanup(void);
+
+#endif
diff --git a/drivers/staging/hv/BlkVsc.c b/drivers/staging/hv/BlkVsc.c
index 51aa861..a48ee3a 100644
--- a/drivers/staging/hv/BlkVsc.c
+++ b/drivers/staging/hv/BlkVsc.c
@@ -16,6 +16,7 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  * Authors:
+ *   Haiyang Zhang <haiyangz@microsoft.com>
  *   Hank Janssen  <hjanssen@microsoft.com>
  *
  */
diff --git a/drivers/staging/hv/Channel.c b/drivers/staging/hv/Channel.c
index d649ee1..746370e 100644
--- a/drivers/staging/hv/Channel.c
+++ b/drivers/staging/hv/Channel.c
@@ -611,7 +611,7 @@
 
 	/* Stop callback and cancel the timer asap */
 	Channel->OnChannelCallback = NULL;
-	del_timer(&Channel->poll_timer);
+	del_timer_sync(&Channel->poll_timer);
 
 	/* Send a closing message */
 	info = kmalloc(sizeof(*info) +
@@ -978,14 +978,10 @@
 {
 	DumpVmbusChannel(Channel);
 	ASSERT(Channel->OnChannelCallback);
-#ifdef ENABLE_POLLING
-	del_timer(&Channel->poll_timer);
+
 	Channel->OnChannelCallback(Channel->ChannelCallbackContext);
-	channel->poll_timer.expires(jiffies + usecs_to_jiffies(100);
-	add_timer(&channel->poll_timer);
-#else
-	Channel->OnChannelCallback(Channel->ChannelCallbackContext);
-#endif
+
+	mod_timer(&Channel->poll_timer, jiffies + usecs_to_jiffies(100));
 }
 
 /**
@@ -997,10 +993,6 @@
 
 	if (channel->OnChannelCallback) {
 		channel->OnChannelCallback(channel->ChannelCallbackContext);
-#ifdef ENABLE_POLLING
-		channel->poll_timer.expires(jiffies + usecs_to_jiffies(100);
-		add_timer(&channel->poll_timer);
-#endif
 	}
 }
 
diff --git a/drivers/staging/hv/ChannelMgmt.c b/drivers/staging/hv/ChannelMgmt.c
index 3db62ca..ef38467 100644
--- a/drivers/staging/hv/ChannelMgmt.c
+++ b/drivers/staging/hv/ChannelMgmt.c
@@ -119,7 +119,7 @@
  */
 void FreeVmbusChannel(struct vmbus_channel *Channel)
 {
-	del_timer(&Channel->poll_timer);
+	del_timer_sync(&Channel->poll_timer);
 
 	/*
 	 * We have to release the channel's workqueue/thread in the vmbus's
diff --git a/drivers/staging/hv/NetVsc.c b/drivers/staging/hv/NetVsc.c
index d384c0d..1c717f9 100644
--- a/drivers/staging/hv/NetVsc.c
+++ b/drivers/staging/hv/NetVsc.c
@@ -15,6 +15,7 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  * Authors:
+ *   Haiyang Zhang <haiyangz@microsoft.com>
  *   Hank Janssen  <hjanssen@microsoft.com>
  */
 #include <linux/kernel.h>
diff --git a/drivers/staging/hv/NetVsc.h b/drivers/staging/hv/NetVsc.h
index 3e7112f..6e0e034 100644
--- a/drivers/staging/hv/NetVsc.h
+++ b/drivers/staging/hv/NetVsc.h
@@ -16,6 +16,7 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  * Authors:
+ *   Haiyang Zhang <haiyangz@microsoft.com>
  *   Hank Janssen  <hjanssen@microsoft.com>
  *
  */
diff --git a/drivers/staging/hv/StorVsc.c b/drivers/staging/hv/StorVsc.c
index 14015c9..2f7c425 100644
--- a/drivers/staging/hv/StorVsc.c
+++ b/drivers/staging/hv/StorVsc.c
@@ -196,7 +196,7 @@
 	 * Now, initiate the vsc/vsp initialization protocol on the open
 	 * channel
 	 */
-	memset(request, sizeof(struct storvsc_request_extension), 0);
+	memset(request, 0, sizeof(struct storvsc_request_extension));
 	request->WaitEvent = osd_WaitEventCreate();
 
 	vstorPacket->Operation = VStorOperationBeginInitialization;
@@ -233,7 +233,7 @@
 	DPRINT_INFO(STORVSC, "QUERY_PROTOCOL_VERSION_OPERATION...");
 
 	/* reuse the packet for version range supported */
-	memset(vstorPacket, sizeof(struct vstor_packet), 0);
+	memset(vstorPacket, 0, sizeof(struct vstor_packet));
 	vstorPacket->Operation = VStorOperationQueryProtocolVersion;
 	vstorPacket->Flags = REQUEST_COMPLETION_FLAG;
 
@@ -266,7 +266,7 @@
 	/* Query channel properties */
 	DPRINT_INFO(STORVSC, "QUERY_PROPERTIES_OPERATION...");
 
-	memset(vstorPacket, sizeof(struct vstor_packet), 0);
+	memset(vstorPacket, 0, sizeof(struct vstor_packet));
 	vstorPacket->Operation = VStorOperationQueryProperties;
 	vstorPacket->Flags = REQUEST_COMPLETION_FLAG;
 	vstorPacket->StorageChannelProperties.PortNumber =
@@ -305,7 +305,7 @@
 
 	DPRINT_INFO(STORVSC, "END_INITIALIZATION_OPERATION...");
 
-	memset(vstorPacket, sizeof(struct vstor_packet), 0);
+	memset(vstorPacket, 0, sizeof(struct vstor_packet));
 	vstorPacket->Operation = VStorOperationEndInitialization;
 	vstorPacket->Flags = REQUEST_COMPLETION_FLAG;
 
@@ -508,7 +508,7 @@
 	int ret;
 
 	storDriver = (struct storvsc_driver_object *)Device->Driver;
-	memset(&props, sizeof(struct vmstorage_channel_properties), 0);
+	memset(&props, 0, sizeof(struct vmstorage_channel_properties));
 
 	/* Open the channel */
 	ret = Device->Driver->VmbusChannelInterface.Open(Device,
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index 99c4926..62b2828 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -15,6 +15,7 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  * Authors:
+ *   Haiyang Zhang <haiyangz@microsoft.com>
  *   Hank Janssen  <hjanssen@microsoft.com>
  */
 #include <linux/init.h>
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 3192d50..0d7459e 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -15,6 +15,7 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  * Authors:
+ *   Haiyang Zhang <haiyangz@microsoft.com>
  *   Hank Janssen  <hjanssen@microsoft.com>
  */
 #include <linux/init.h>
diff --git a/drivers/staging/netwave/Kconfig b/drivers/staging/netwave/Kconfig
new file mode 100644
index 0000000..8033e81
--- /dev/null
+++ b/drivers/staging/netwave/Kconfig
@@ -0,0 +1,11 @@
+config PCMCIA_NETWAVE
+	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
+	depends on PCMCIA && WLAN
+	select WIRELESS_EXT
+	select WEXT_PRIV
+	help
+	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
+	  wireless Ethernet networking card to your computer.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called netwave_cs.  If unsure, say N.
diff --git a/drivers/staging/netwave/Makefile b/drivers/staging/netwave/Makefile
new file mode 100644
index 0000000..2ab89de
--- /dev/null
+++ b/drivers/staging/netwave/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave_cs.o
diff --git a/drivers/staging/netwave/TODO b/drivers/staging/netwave/TODO
new file mode 100644
index 0000000..9bd15a2
--- /dev/null
+++ b/drivers/staging/netwave/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/netwave/netwave_cs.c b/drivers/staging/netwave/netwave_cs.c
new file mode 100644
index 0000000..e61e6b9
--- /dev/null
+++ b/drivers/staging/netwave/netwave_cs.c
@@ -0,0 +1,1370 @@
+/*********************************************************************
+ *                
+ * Filename:      netwave_cs.c
+ * Version:       0.4.1
+ * Description:   Netwave AirSurfer Wireless LAN PC Card driver
+ * Status:        Experimental.
+ * Authors:       John Markus Bjørndalen <johnm@cs.uit.no>
+ *                Dag Brattli <dagb@cs.uit.no>
+ *                David Hinds <dahinds@users.sourceforge.net>
+ * Created at:    A long time ago!
+ * Modified at:   Mon Nov 10 11:54:37 1997
+ * Modified by:   Dag Brattli <dagb@cs.uit.no>
+ * 
+ *     Copyright (c) 1997 University of Tromsø, Norway
+ *
+ * Revision History:
+ *
+ *   08-Nov-97 15:14:47   John Markus Bjørndalen <johnm@cs.uit.no>
+ *    - Fixed some bugs in netwave_rx and cleaned it up a bit. 
+ *      (One of the bugs would have destroyed packets when receiving
+ *      multiple packets per interrupt). 
+ *    - Cleaned up parts of newave_hw_xmit. 
+ *    - A few general cleanups. 
+ *   24-Oct-97 13:17:36   Dag Brattli <dagb@cs.uit.no>
+ *    - Fixed netwave_rx receive function (got updated docs)
+ *   Others:
+ *    - Changed name from xircnw to netwave, take a look at 
+ *      http://www.netwave-wireless.com
+ *    - Some reorganizing of the code
+ *    - Removed possible race condition between interrupt handler and transmit
+ *      function
+ *    - Started to add wireless extensions, but still needs some coding
+ *    - Added watchdog for better handling of transmission timeouts 
+ *      (hopefully this works better)
+ ********************************************************************/
+
+/* To have statistics (just packets sent) define this */
+#undef NETWAVE_STATS
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/mem_op.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define NETWAVE_REGOFF         0x8000
+/* The Netwave IO registers, offsets to iobase */
+#define NETWAVE_REG_COR        0x0
+#define NETWAVE_REG_CCSR       0x2
+#define NETWAVE_REG_ASR        0x4
+#define NETWAVE_REG_IMR        0xa
+#define NETWAVE_REG_PMR        0xc
+#define NETWAVE_REG_IOLOW      0x6
+#define NETWAVE_REG_IOHI       0x7
+#define NETWAVE_REG_IOCONTROL  0x8
+#define NETWAVE_REG_DATA       0xf
+/* The Netwave Extended IO registers, offsets to RamBase */
+#define NETWAVE_EREG_ASCC      0x114
+#define NETWAVE_EREG_RSER      0x120
+#define NETWAVE_EREG_RSERW     0x124
+#define NETWAVE_EREG_TSER      0x130
+#define NETWAVE_EREG_TSERW     0x134
+#define NETWAVE_EREG_CB        0x100
+#define NETWAVE_EREG_SPCQ      0x154
+#define NETWAVE_EREG_SPU       0x155
+#define NETWAVE_EREG_LIF       0x14e
+#define NETWAVE_EREG_ISPLQ     0x156
+#define NETWAVE_EREG_HHC       0x158
+#define NETWAVE_EREG_NI        0x16e
+#define NETWAVE_EREG_MHS       0x16b
+#define NETWAVE_EREG_TDP       0x140
+#define NETWAVE_EREG_RDP       0x150
+#define NETWAVE_EREG_PA        0x160
+#define NETWAVE_EREG_EC        0x180
+#define NETWAVE_EREG_CRBP      0x17a
+#define NETWAVE_EREG_ARW       0x166
+
+/*
+ * Commands used in the extended command buffer
+ * NETWAVE_EREG_CB (0x100-0x10F) 
+ */
+#define NETWAVE_CMD_NOP        0x00
+#define NETWAVE_CMD_SRC        0x01
+#define NETWAVE_CMD_STC        0x02
+#define NETWAVE_CMD_AMA        0x03
+#define NETWAVE_CMD_DMA        0x04
+#define NETWAVE_CMD_SAMA       0x05
+#define NETWAVE_CMD_ER         0x06
+#define NETWAVE_CMD_DR         0x07
+#define NETWAVE_CMD_TL         0x08
+#define NETWAVE_CMD_SRP        0x09
+#define NETWAVE_CMD_SSK        0x0a
+#define NETWAVE_CMD_SMD        0x0b
+#define NETWAVE_CMD_SAPD       0x0c
+#define NETWAVE_CMD_SSS        0x11
+/* End of Command marker */
+#define NETWAVE_CMD_EOC        0x00
+
+/* ASR register bits */
+#define NETWAVE_ASR_RXRDY   0x80
+#define NETWAVE_ASR_TXBA    0x01
+
+#define TX_TIMEOUT		((32*HZ)/100)
+
+static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */
+static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */
+
+static const unsigned int corConfIENA   = 0x01; /* Interrupt enable */
+static const unsigned int corConfLVLREQ = 0x40; /* Keep high */
+
+static const unsigned int rxConfRxEna  = 0x80; /* Receive Enable */
+static const unsigned int rxConfMAC    = 0x20; /* MAC host receive mode*/ 
+static const unsigned int rxConfPro    = 0x10; /* Promiscuous */
+static const unsigned int rxConfAMP    = 0x08; /* Accept Multicast Packets */
+static const unsigned int rxConfBcast  = 0x04; /* Accept Broadcast Packets */
+
+static const unsigned int txConfTxEna  = 0x80; /* Transmit Enable */
+static const unsigned int txConfMAC    = 0x20; /* Host sends MAC mode */
+static const unsigned int txConfEUD    = 0x10; /* Enable Uni-Data packets */
+static const unsigned int txConfKey    = 0x02; /* Scramble data packets */
+static const unsigned int txConfLoop   = 0x01; /* Loopback mode */
+
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Choose the domain, default is 0x100 */
+static u_int  domain = 0x100;
+
+/* Scramble key, range from 0x0 to 0xffff.  
+ * 0x0 is no scrambling. 
+ */
+static u_int  scramble_key = 0x0;
+
+/* Shared memory speed, in ns. The documentation states that 
+ * the card should not be read faster than every 400ns. 
+ * This timing should be provided by the HBA. If it becomes a 
+ * problem, try setting mem_speed to 400. 
+ */
+static int mem_speed;
+
+module_param(domain, int, 0);
+module_param(scramble_key, int, 0);
+module_param(mem_speed, int, 0);
+
+/*====================================================================*/
+
+/* PCMCIA (Card Services) related functions */
+static void netwave_release(struct pcmcia_device *link);     /* Card removal */
+static int netwave_pcmcia_config(struct pcmcia_device *arg); /* Runs after card
+													   insertion */
+static void netwave_detach(struct pcmcia_device *p_dev);    /* Destroy instance */
+
+/* Hardware configuration */
+static void netwave_doreset(unsigned int iobase, u_char __iomem *ramBase);
+static void netwave_reset(struct net_device *dev);
+
+/* Misc device stuff */
+static int netwave_open(struct net_device *dev);  /* Open the device */
+static int netwave_close(struct net_device *dev); /* Close the device */
+
+/* Packet transmission and Packet reception */
+static netdev_tx_t netwave_start_xmit( struct sk_buff *skb,
+					     struct net_device *dev);
+static int netwave_rx( struct net_device *dev);
+
+/* Interrupt routines */
+static irqreturn_t netwave_interrupt(int irq, void *dev_id);
+static void netwave_watchdog(struct net_device *);
+
+/* Wireless extensions */
+static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
+
+static void set_multicast_list(struct net_device *dev);
+
+/*
+   A struct pcmcia_device structure has fields for most things that are needed
+   to keep track of a socket, but there will usually be some device
+   specific information that also needs to be kept track of.  The
+   'priv' pointer in a struct pcmcia_device structure can be used to point to
+   a device-specific private data structure, like this.
+
+   A driver needs to provide a dev_node_t structure for each device
+   on a card.  In some cases, there is only one device per card (for
+   example, ethernet cards, modems).  In other cases, there may be
+   many actual or logical devices (SCSI adapters, memory cards with
+   multiple partitions).  The dev_node_t structures need to be kept
+   in a linked list starting at the 'dev' field of a struct pcmcia_device
+   structure.  We allocate them in the card's private data structure,
+   because they generally can't be allocated dynamically.
+*/
+
+static const struct iw_handler_def	netwave_handler_def;
+
+#define SIOCGIPSNAP	SIOCIWFIRSTPRIV	+ 1	/* Site Survey Snapshot */
+
+#define MAX_ESA 10
+
+typedef struct net_addr {
+    u_char addr48[6];
+} net_addr;
+
+struct site_survey {
+    u_short length;
+    u_char  struct_revision;
+    u_char  roaming_state;
+	
+    u_char  sp_existsFlag;
+    u_char  sp_link_quality;
+    u_char  sp_max_link_quality;
+    u_char  linkQualityGoodFairBoundary;
+    u_char  linkQualityFairPoorBoundary;
+    u_char  sp_utilization;
+    u_char  sp_goodness;
+    u_char  sp_hotheadcount;
+    u_char  roaming_condition;
+	
+    net_addr sp;
+    u_char   numAPs;
+    net_addr nearByAccessPoints[MAX_ESA];
+};	
+   
+typedef struct netwave_private {
+	struct pcmcia_device	*p_dev;
+    spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
+    dev_node_t node;
+    u_char     __iomem *ramBase;
+    int        timeoutCounter;
+    int        lastExec;
+    struct timer_list      watchdog;	/* To avoid blocking state */
+    struct site_survey     nss;
+    struct iw_statistics   iw_stats;    /* Wireless stats */
+} netwave_private;
+
+/*
+ * The Netwave card is little-endian, so won't work for big endian
+ * systems.
+ */
+static inline unsigned short get_uint16(u_char __iomem *staddr) 
+{
+    return readw(staddr); /* Return only 16 bits */
+}
+
+static inline short get_int16(u_char __iomem * staddr)
+{
+    return readw(staddr);
+}
+
+/* 
+ * Wait until the WOC (Write Operation Complete) bit in the 
+ * ASR (Adapter Status Register) is asserted. 
+ * This should have aborted if it takes too long time. 
+ */
+static inline void wait_WOC(unsigned int iobase)
+{
+    /* Spin lock */
+    while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ; 
+}
+
+static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase, 
+			     unsigned int iobase) {
+    u_short resultBuffer;
+
+    /* if time since last snapshot is > 1 sec. (100 jiffies?)  then take 
+     * new snapshot, else return cached data. This is the recommended rate.  
+     */
+    if ( jiffies - priv->lastExec > 100) { 
+	/* Take site survey  snapshot */ 
+	/*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies -
+	  priv->lastExec); */
+	wait_WOC(iobase); 
+	writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0); 
+	writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1); 
+	wait_WOC(iobase); 
+
+	/* Get result and copy to cach */ 
+	resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP); 
+	copy_from_pc( &priv->nss, ramBase+resultBuffer, 
+		      sizeof(struct site_survey)); 
+    } 
+}
+
+/*
+ * Function netwave_get_wireless_stats (dev)
+ *
+ *    Wireless extensions statistics
+ *
+ */
+static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
+{	
+    unsigned long flags;
+    unsigned int iobase = dev->base_addr;
+    netwave_private *priv = netdev_priv(dev);
+    u_char __iomem *ramBase = priv->ramBase;
+    struct iw_statistics* wstats;
+	
+    wstats = &priv->iw_stats;
+
+    spin_lock_irqsave(&priv->spinlock, flags);
+	
+    netwave_snapshot( priv, ramBase, iobase);
+
+    wstats->status = priv->nss.roaming_state;
+    wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ); 
+    wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ);
+    wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f;
+    wstats->discard.nwid = 0L;
+    wstats->discard.code = 0L;
+    wstats->discard.misc = 0L;
+
+    spin_unlock_irqrestore(&priv->spinlock, flags);
+    
+    return &priv->iw_stats;
+}
+
+static const struct net_device_ops netwave_netdev_ops = {
+	.ndo_open	 	= netwave_open,
+	.ndo_stop		= netwave_close,
+	.ndo_start_xmit		= netwave_start_xmit,
+	.ndo_set_multicast_list = set_multicast_list,
+	.ndo_tx_timeout		= netwave_watchdog,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/*
+ * Function netwave_attach (void)
+ *
+ *     Creates an "instance" of the driver, allocating local data 
+ *     structures for one device.  The device is registered with Card 
+ *     Services.
+ *
+ *     The dev_link structure is initialized, but we don't actually
+ *     configure the card at this point -- we wait until we receive a
+ *     card insertion event.
+ */
+static int netwave_probe(struct pcmcia_device *link)
+{
+    struct net_device *dev;
+    netwave_private *priv;
+
+    dev_dbg(&link->dev, "netwave_attach()\n");
+
+    /* Initialize the struct pcmcia_device structure */
+    dev = alloc_etherdev(sizeof(netwave_private));
+    if (!dev)
+	return -ENOMEM;
+    priv = netdev_priv(dev);
+    priv->p_dev = link;
+    link->priv = dev;
+
+    /* The io structure describes IO port mapping */
+    link->io.NumPorts1 = 16;
+    link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+    /* link->io.NumPorts2 = 16; 
+       link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
+    link->io.IOAddrLines = 5;
+    
+    /* Interrupt setup */
+    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+    link->irq.Handler = &netwave_interrupt;
+    
+    /* General socket configuration */
+    link->conf.Attributes = CONF_ENABLE_IRQ;
+    link->conf.IntType = INT_MEMORY_AND_IO;
+    link->conf.ConfigIndex = 1;
+
+    /* Netwave private struct init. link/dev/node already taken care of,
+     * other stuff zero'd - Jean II */
+    spin_lock_init(&priv->spinlock);
+
+    /* Netwave specific entries in the device structure */
+    dev->netdev_ops = &netwave_netdev_ops;
+    /* wireless extensions */
+    dev->wireless_handlers = &netwave_handler_def;
+
+    dev->watchdog_timeo = TX_TIMEOUT;
+
+    return netwave_pcmcia_config( link);
+} /* netwave_attach */
+
+/*
+ * Function netwave_detach (link)
+ *
+ *    This deletes a driver "instance".  The device is de-registered
+ *    with Card Services.  If it has been released, all local data
+ *    structures are freed.  Otherwise, the structures will be freed
+ *    when the device is released.
+ */
+static void netwave_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	dev_dbg(&link->dev, "netwave_detach\n");
+
+	netwave_release(link);
+
+	if (link->dev_node)
+		unregister_netdev(dev);
+
+	free_netdev(dev);
+} /* netwave_detach */
+
+/*
+ * Wireless Handler : get protocol name
+ */
+static int netwave_get_name(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	strcpy(wrqu->name, "Netwave");
+	return 0;
+}
+
+/*
+ * Wireless Handler : set Network ID
+ */
+static int netwave_set_nwid(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned long flags;
+	unsigned int iobase = dev->base_addr;
+	netwave_private *priv = netdev_priv(dev);
+	u_char __iomem *ramBase = priv->ramBase;
+
+	/* Disable interrupts & save flags */
+	spin_lock_irqsave(&priv->spinlock, flags);
+
+	if(!wrqu->nwid.disabled) {
+	    domain = wrqu->nwid.value;
+	    printk( KERN_DEBUG "Setting domain to 0x%x%02x\n", 
+		    (domain >> 8) & 0x01, domain & 0xff);
+	    wait_WOC(iobase);
+	    writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
+	    writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+	    writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2);
+	    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+	}
+
+	/* ReEnable interrupts & restore flags */
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+    
+	return 0;
+}
+
+/*
+ * Wireless Handler : get Network ID
+ */
+static int netwave_get_nwid(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	wrqu->nwid.value = domain;
+	wrqu->nwid.disabled = 0;
+	wrqu->nwid.fixed = 1;
+	return 0;
+}
+
+/*
+ * Wireless Handler : set scramble key
+ */
+static int netwave_set_scramble(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu,
+				char *key)
+{
+	unsigned long flags;
+	unsigned int iobase = dev->base_addr;
+	netwave_private *priv = netdev_priv(dev);
+	u_char __iomem *ramBase = priv->ramBase;
+
+	/* Disable interrupts & save flags */
+	spin_lock_irqsave(&priv->spinlock, flags);
+
+	scramble_key = (key[0] << 8) | key[1];
+	wait_WOC(iobase);
+	writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
+	writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+	writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+	writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+	/* ReEnable interrupts & restore flags */
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+    
+	return 0;
+}
+
+/*
+ * Wireless Handler : get scramble key
+ */
+static int netwave_get_scramble(struct net_device *dev,
+				struct iw_request_info *info,
+				union iwreq_data *wrqu,
+				char *key)
+{
+	key[1] = scramble_key & 0xff;
+	key[0] = (scramble_key>>8) & 0xff;
+	wrqu->encoding.flags = IW_ENCODE_ENABLED;
+	wrqu->encoding.length = 2;
+	return 0;
+}
+
+/*
+ * Wireless Handler : get mode
+ */
+static int netwave_get_mode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	if(domain & 0x100)
+		wrqu->mode = IW_MODE_INFRA;
+	else
+		wrqu->mode = IW_MODE_ADHOC;
+
+	return 0;
+}
+
+/*
+ * Wireless Handler : get range info
+ */
+static int netwave_get_range(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu,
+			     char *extra)
+{
+	struct iw_range *range = (struct iw_range *) extra;
+	int ret = 0;
+
+	/* Set the length (very important for backward compatibility) */
+	wrqu->data.length = sizeof(struct iw_range);
+
+	/* Set all the info we don't care or don't know about to zero */
+	memset(range, 0, sizeof(struct iw_range));
+
+	/* Set the Wireless Extension versions */
+	range->we_version_compiled = WIRELESS_EXT;
+	range->we_version_source = 9;	/* Nothing for us in v10 and v11 */
+		   
+	/* Set information in the range struct */
+	range->throughput = 450 * 1000;	/* don't argue on this ! */
+	range->min_nwid = 0x0000;
+	range->max_nwid = 0x01FF;
+
+	range->num_channels = range->num_frequency = 0;
+		   
+	range->sensitivity = 0x3F;
+	range->max_qual.qual = 255;
+	range->max_qual.level = 255;
+	range->max_qual.noise = 0;
+		   
+	range->num_bitrates = 1;
+	range->bitrate[0] = 1000000;	/* 1 Mb/s */
+
+	range->encoding_size[0] = 2;		/* 16 bits scrambling */
+	range->num_encoding_sizes = 1;
+	range->max_encoding_tokens = 1;	/* Only one key possible */
+
+	return ret;
+}
+
+/*
+ * Wireless Private Handler : get snapshot
+ */
+static int netwave_get_snap(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned long flags;
+	unsigned int iobase = dev->base_addr;
+	netwave_private *priv = netdev_priv(dev);
+	u_char __iomem *ramBase = priv->ramBase;
+
+	/* Disable interrupts & save flags */
+	spin_lock_irqsave(&priv->spinlock, flags);
+
+	/* Take snapshot of environment */
+	netwave_snapshot( priv, ramBase, iobase);
+	wrqu->data.length = priv->nss.length;
+	memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey));
+
+	priv->lastExec = jiffies;
+
+	/* ReEnable interrupts & restore flags */
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+    
+	return(0);
+}
+
+/*
+ * Structures to export the Wireless Handlers
+ *     This is the stuff that are treated the wireless extensions (iwconfig)
+ */
+
+static const struct iw_priv_args netwave_private_args[] = {
+/*{ cmd,         set_args,                            get_args, name } */
+  { SIOCGIPSNAP, 0, 
+    IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey), 
+    "getsitesurvey" },
+};
+
+static const iw_handler		netwave_handler[] =
+{
+	NULL,				/* SIOCSIWNAME */
+	netwave_get_name,		/* SIOCGIWNAME */
+	netwave_set_nwid,		/* SIOCSIWNWID */
+	netwave_get_nwid,		/* SIOCGIWNWID */
+	NULL,				/* SIOCSIWFREQ */
+	NULL,				/* SIOCGIWFREQ */
+	NULL,				/* SIOCSIWMODE */
+	netwave_get_mode,		/* SIOCGIWMODE */
+	NULL,				/* SIOCSIWSENS */
+	NULL,				/* SIOCGIWSENS */
+	NULL,				/* SIOCSIWRANGE */
+	netwave_get_range,		/* SIOCGIWRANGE */
+	NULL,				/* SIOCSIWPRIV */
+	NULL,				/* SIOCGIWPRIV */
+	NULL,				/* SIOCSIWSTATS */
+	NULL,				/* SIOCGIWSTATS */
+	NULL,				/* SIOCSIWSPY */
+	NULL,				/* SIOCGIWSPY */
+	NULL,				/* -- hole -- */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCSIWAP */
+	NULL,				/* SIOCGIWAP */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCGIWAPLIST */
+	NULL,				/* -- hole -- */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCSIWESSID */
+	NULL,				/* SIOCGIWESSID */
+	NULL,				/* SIOCSIWNICKN */
+	NULL,				/* SIOCGIWNICKN */
+	NULL,				/* -- hole -- */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCSIWRATE */
+	NULL,				/* SIOCGIWRATE */
+	NULL,				/* SIOCSIWRTS */
+	NULL,				/* SIOCGIWRTS */
+	NULL,				/* SIOCSIWFRAG */
+	NULL,				/* SIOCGIWFRAG */
+	NULL,				/* SIOCSIWTXPOW */
+	NULL,				/* SIOCGIWTXPOW */
+	NULL,				/* SIOCSIWRETRY */
+	NULL,				/* SIOCGIWRETRY */
+	netwave_set_scramble,		/* SIOCSIWENCODE */
+	netwave_get_scramble,		/* SIOCGIWENCODE */
+};
+
+static const iw_handler		netwave_private_handler[] =
+{
+	NULL,				/* SIOCIWFIRSTPRIV */
+	netwave_get_snap,		/* SIOCIWFIRSTPRIV + 1 */
+};
+
+static const struct iw_handler_def	netwave_handler_def =
+{
+	.num_standard	= ARRAY_SIZE(netwave_handler),
+	.num_private	= ARRAY_SIZE(netwave_private_handler),
+	.num_private_args = ARRAY_SIZE(netwave_private_args),
+	.standard	= (iw_handler *) netwave_handler,
+	.private	= (iw_handler *) netwave_private_handler,
+	.private_args	= (struct iw_priv_args *) netwave_private_args,
+	.get_wireless_stats = netwave_get_wireless_stats,
+};
+
+/*
+ * Function netwave_pcmcia_config (link)
+ *
+ *     netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION 
+ *     event is received, to configure the PCMCIA socket, and to make the
+ *     device available to the system. 
+ *
+ */
+
+static int netwave_pcmcia_config(struct pcmcia_device *link) {
+    struct net_device *dev = link->priv;
+    netwave_private *priv = netdev_priv(dev);
+    int i, j, ret;
+    win_req_t req;
+    memreq_t mem;
+    u_char __iomem *ramBase = NULL;
+
+    dev_dbg(&link->dev, "netwave_pcmcia_config\n");
+
+    /*
+     *  Try allocating IO ports.  This tries a few fixed addresses.
+     *  If you want, you can also read the card's config table to
+     *  pick addresses -- see the serial driver for an example.
+     */
+    for (i = j = 0x0; j < 0x400; j += 0x20) {
+	link->io.BasePort1 = j ^ 0x300;
+	i = pcmcia_request_io(link, &link->io);
+	if (i == 0)
+		break;
+    }
+    if (i != 0)
+	goto failed;
+
+    /*
+     *  Now allocate an interrupt line.  Note that this does not
+     *  actually assign a handler to the interrupt.
+     */
+    ret = pcmcia_request_irq(link, &link->irq);
+    if (ret)
+	    goto failed;
+
+    /*
+     *  This actually configures the PCMCIA socket -- setting up
+     *  the I/O windows and the interrupt mapping.
+     */
+    ret = pcmcia_request_configuration(link, &link->conf);
+    if (ret)
+	    goto failed;
+
+    /*
+     *  Allocate a 32K memory window.  Note that the struct pcmcia_device
+     *  structure provides space for one window handle -- if your
+     *  device needs several windows, you'll need to keep track of
+     *  the handles in your private data structure, dev->priv.
+     */
+    dev_dbg(&link->dev, "Setting mem speed of %d\n", mem_speed);
+
+    req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+    req.Base = 0; req.Size = 0x8000;
+    req.AccessSpeed = mem_speed;
+    ret = pcmcia_request_window(link, &req, &link->win);
+    if (ret)
+	    goto failed;
+    mem.CardOffset = 0x20000; mem.Page = 0; 
+    ret = pcmcia_map_mem_page(link, link->win, &mem);
+    if (ret)
+	    goto failed;
+
+    /* Store base address of the common window frame */
+    ramBase = ioremap(req.Base, 0x8000);
+    priv->ramBase = ramBase;
+
+    dev->irq = link->irq.AssignedIRQ;
+    dev->base_addr = link->io.BasePort1;
+    SET_NETDEV_DEV(dev, &link->dev);
+
+    if (register_netdev(dev) != 0) {
+	printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
+	goto failed;
+    }
+
+    strcpy(priv->node.dev_name, dev->name);
+    link->dev_node = &priv->node;
+
+    /* Reset card before reading physical address */
+    netwave_doreset(dev->base_addr, ramBase);
+
+    /* Read the ethernet address and fill in the Netwave registers. */
+    for (i = 0; i < 6; i++) 
+	dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i);
+
+    printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx, "
+	   "id %c%c, hw_addr %pM\n",
+	   dev->name, dev->base_addr, dev->irq,
+	   (u_long) ramBase,
+	   (int) readb(ramBase+NETWAVE_EREG_NI),
+	   (int) readb(ramBase+NETWAVE_EREG_NI+1),
+	   dev->dev_addr);
+
+    /* get revision words */
+    printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n", 
+	   get_uint16(ramBase + NETWAVE_EREG_ARW),
+	   get_uint16(ramBase + NETWAVE_EREG_ARW+2));
+    return 0;
+
+failed:
+    netwave_release(link);
+    return -ENODEV;
+} /* netwave_pcmcia_config */
+
+/*
+ * Function netwave_release (arg)
+ *
+ *    After a card is removed, netwave_release() will unregister the net
+ *    device, and release the PCMCIA configuration.  If the device is
+ *    still open, this will be postponed until it is closed.
+ */
+static void netwave_release(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	netwave_private *priv = netdev_priv(dev);
+
+	dev_dbg(&link->dev, "netwave_release\n");
+
+	pcmcia_disable_device(link);
+	if (link->win)
+		iounmap(priv->ramBase);
+}
+
+static int netwave_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	return 0;
+}
+
+static int netwave_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		netwave_reset(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+
+/*
+ * Function netwave_doreset (ioBase, ramBase)
+ *
+ *    Proper hardware reset of the card.
+ */
+static void netwave_doreset(unsigned int ioBase, u_char __iomem *ramBase)
+{
+    /* Reset card */
+    wait_WOC(ioBase);
+    outb(0x80, ioBase + NETWAVE_REG_PMR);
+    writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */
+    outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */
+}
+
+/*
+ * Function netwave_reset (dev)
+ *
+ *    Reset and restore all of the netwave registers 
+ */
+static void netwave_reset(struct net_device *dev) {
+    /* u_char state; */
+    netwave_private *priv = netdev_priv(dev);
+    u_char __iomem *ramBase = priv->ramBase;
+    unsigned int iobase = dev->base_addr;
+
+    pr_debug("netwave_reset: Done with hardware reset\n");
+
+    priv->timeoutCounter = 0;
+
+    /* Reset card */
+    netwave_doreset(iobase, ramBase);
+    printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n");
+	
+    /* Write a NOP to check the card */
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+	
+    /* Set receive conf */
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+    
+    /* Set transmit conf */
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+    
+    /* Now set the MU Domain */
+    printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff);
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+    writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+	
+    /* Set scramble key */
+    printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key);
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+    writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+    /* Enable interrupts, bit 4 high to keep unused
+     * source from interrupting us, bit 2 high to 
+     * set interrupt enable, 567 to enable TxDN, 
+     * RxErr and RxRdy
+     */
+    wait_WOC(iobase);
+    outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR);
+
+    /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36
+     * waitWOC
+     * skriv 80 til d000:3688
+     * sjekk om det ble 80
+     */
+    
+    /* Enable Receiver */
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+	
+    /* Set the IENA bit in COR */
+    wait_WOC(iobase);
+    outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR);
+}
+
+/*
+ * Function netwave_hw_xmit (data, len, dev)    
+ */
+static int netwave_hw_xmit(unsigned char* data, int len,
+			   struct net_device* dev) {
+    unsigned long flags;
+    unsigned int TxFreeList,
+	         curBuff,
+	         MaxData, 
+                 DataOffset;
+    int tmpcount; 
+	
+    netwave_private *priv = netdev_priv(dev);
+    u_char __iomem * ramBase = priv->ramBase;
+    unsigned int iobase = dev->base_addr;
+
+    /* Disable interrupts & save flags */
+    spin_lock_irqsave(&priv->spinlock, flags);
+
+    /* Check if there are transmit buffers available */
+    wait_WOC(iobase);
+    if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) {
+	/* No buffers available */
+	printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n",
+	       dev->name);
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+	return 1;
+    }
+
+    dev->stats.tx_bytes += len;
+
+    pr_debug("Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+	  readb(ramBase + NETWAVE_EREG_SPCQ),
+	  readb(ramBase + NETWAVE_EREG_SPU),
+	  readb(ramBase + NETWAVE_EREG_LIF),
+	  readb(ramBase + NETWAVE_EREG_ISPLQ));
+
+    /* Now try to insert it into the adapters free memory */
+    wait_WOC(iobase);
+    TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP);
+    MaxData    = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
+    DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
+	
+    pr_debug("TxFreeList %x, MaxData %x, DataOffset %x\n",
+	  TxFreeList, MaxData, DataOffset);
+
+    /* Copy packet to the adapter fragment buffers */
+    curBuff = TxFreeList; 
+    tmpcount = 0; 
+    while (tmpcount < len) {
+	int tmplen = len - tmpcount; 
+	copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount, 
+		   (tmplen < MaxData) ? tmplen : MaxData);
+	tmpcount += MaxData;
+			
+	/* Advance to next buffer */
+	curBuff = get_uint16(ramBase + curBuff);
+    }
+    
+    /* Now issue transmit list */
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+    writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+    spin_unlock_irqrestore(&priv->spinlock, flags);
+    return 0;
+}
+
+static netdev_tx_t netwave_start_xmit(struct sk_buff *skb,
+					    struct net_device *dev) {
+	/* This flag indicate that the hardware can't perform a transmission.
+	 * Theoritically, NET3 check it before sending a packet to the driver,
+	 * but in fact it never do that and pool continuously.
+	 * As the watchdog will abort too long transmissions, we are quite safe...
+	 */
+
+    netif_stop_queue(dev);
+
+    {
+	short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+	unsigned char* buf = skb->data;
+	
+	if (netwave_hw_xmit( buf, length, dev) == 1) {
+	    /* Some error, let's make them call us another time? */
+	    netif_start_queue(dev);
+	}
+	dev->trans_start = jiffies;
+    }
+    dev_kfree_skb(skb);
+    
+    return NETDEV_TX_OK;
+} /* netwave_start_xmit */
+
+/*
+ * Function netwave_interrupt (irq, dev_id)
+ *
+ *    This function is the interrupt handler for the Netwave card. This
+ *    routine will be called whenever: 
+ *	  1. A packet is received.
+ *	  2. A packet has successfully been transferred and the unit is
+ *	     ready to transmit another packet.
+ *	  3. A command has completed execution.
+ */
+static irqreturn_t netwave_interrupt(int irq, void* dev_id)
+{
+    unsigned int iobase;
+    u_char __iomem *ramBase;
+    struct net_device *dev = (struct net_device *)dev_id;
+    struct netwave_private *priv = netdev_priv(dev);
+    struct pcmcia_device *link = priv->p_dev;
+    int i;
+    
+    if (!netif_device_present(dev))
+	return IRQ_NONE;
+    
+    iobase = dev->base_addr;
+    ramBase = priv->ramBase;
+	
+    /* Now find what caused the interrupt, check while interrupts ready */
+    for (i = 0; i < 10; i++) {
+	u_char status;
+		
+	wait_WOC(iobase);	
+	if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02))
+	    break; /* None of the interrupt sources asserted (normal exit) */
+	
+        status = inb(iobase + NETWAVE_REG_ASR);
+		
+	if (!pcmcia_dev_present(link)) {
+	    pr_debug("netwave_interrupt: Interrupt with status 0x%x "
+		  "from removed or suspended card!\n", status);
+	    break;
+	}
+		
+	/* RxRdy */
+	if (status & 0x80) {
+	    netwave_rx(dev);
+	    /* wait_WOC(iobase); */
+	    /* RxRdy cannot be reset directly by the host */
+	}
+	/* RxErr */
+	if (status & 0x40) {
+	    u_char rser;
+			
+	    rser = readb(ramBase + NETWAVE_EREG_RSER);			
+	    
+	    if (rser & 0x04) {
+		++dev->stats.rx_dropped;
+		++dev->stats.rx_crc_errors;
+	    }
+	    if (rser & 0x02)
+		++dev->stats.rx_frame_errors;
+			
+	    /* Clear the RxErr bit in RSER. RSER+4 is the
+	     * write part. Also clear the RxCRC (0x04) and 
+	     * RxBig (0x02) bits if present */
+	    wait_WOC(iobase);
+	    writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4);
+
+	    /* Write bit 6 high to ASCC to clear RxErr in ASR,
+	     * WOC must be set first! 
+	     */
+	    wait_WOC(iobase);
+	    writeb(0x40, ramBase + NETWAVE_EREG_ASCC);
+
+	    /* Remember to count up dev->stats on error packets */
+	    ++dev->stats.rx_errors;
+	}
+	/* TxDN */
+	if (status & 0x20) {
+	    int txStatus;
+
+	    txStatus = readb(ramBase + NETWAVE_EREG_TSER);
+	    pr_debug("Transmit done. TSER = %x id %x\n",
+		  txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
+	    
+	    if (txStatus & 0x20) {
+		/* Transmitting was okay, clear bits */
+		wait_WOC(iobase);
+		writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4);
+		++dev->stats.tx_packets;
+	    }
+			
+	    if (txStatus & 0xd0) {
+		if (txStatus & 0x80) {
+		    ++dev->stats.collisions; /* Because of /proc/net/dev*/
+		    /* ++dev->stats.tx_aborted_errors; */
+		    /* printk("Collision. %ld\n", jiffies - dev->trans_start); */
+		}
+		if (txStatus & 0x40) 
+		    ++dev->stats.tx_carrier_errors;
+		/* 0x80 TxGU Transmit giveup - nine times and no luck
+		 * 0x40 TxNOAP No access point. Discarded packet.
+		 * 0x10 TxErr Transmit error. Always set when 
+		 *      TxGU and TxNOAP is set. (Those are the only ones
+		 *      to set TxErr).
+		 */
+		pr_debug("netwave_interrupt: TxDN with error status %x\n",
+		      txStatus);
+		
+		/* Clear out TxGU, TxNOAP, TxErr and TxTrys */
+		wait_WOC(iobase);
+		writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
+		++dev->stats.tx_errors;
+	    }
+	    pr_debug("New status is TSER %x ASR %x\n",
+		  readb(ramBase + NETWAVE_EREG_TSER),
+		  inb(iobase + NETWAVE_REG_ASR));
+
+	    netif_wake_queue(dev);
+	}
+	/* TxBA, this would trigger on all error packets received */
+	/* if (status & 0x01) {
+	   pr_debug("Transmit buffers available, %x\n", status);
+	   }
+	   */
+    }
+    /* Handled if we looped at least one time - Jean II */
+    return IRQ_RETVAL(i);
+} /* netwave_interrupt */
+
+/*
+ * Function netwave_watchdog (a)
+ *
+ *    Watchdog : when we start a transmission, we set a timer in the
+ *    kernel.  If the transmission complete, this timer is disabled. If
+ *    it expire, we reset the card.
+ *
+ */
+static void netwave_watchdog(struct net_device *dev) {
+
+    pr_debug("%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+    netwave_reset(dev);
+    dev->trans_start = jiffies;
+    netif_wake_queue(dev);
+} /* netwave_watchdog */
+
+static int netwave_rx(struct net_device *dev)
+{
+    netwave_private *priv = netdev_priv(dev);
+    u_char __iomem *ramBase = priv->ramBase;
+    unsigned int iobase = dev->base_addr;
+    u_char rxStatus;
+    struct sk_buff *skb = NULL;
+    unsigned int curBuffer,
+		rcvList;
+    int rcvLen;
+    int tmpcount = 0;
+    int dataCount, dataOffset;
+    int i;
+    u_char *ptr;
+	
+    pr_debug("xinw_rx: Receiving ... \n");
+
+    /* Receive max 10 packets for now. */
+    for (i = 0; i < 10; i++) {
+	/* Any packets? */
+	wait_WOC(iobase);
+	rxStatus = readb(ramBase + NETWAVE_EREG_RSER);		
+	if ( !( rxStatus & 0x80)) /* No more packets */
+	    break;
+		
+	/* Check if multicast/broadcast or other */
+	/* multicast = (rxStatus & 0x20);  */
+		
+	/* The receive list pointer and length of the packet */
+	wait_WOC(iobase);
+	rcvLen  = get_int16( ramBase + NETWAVE_EREG_RDP);
+	rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2);
+		
+	if (rcvLen < 0) {
+	    printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n", 
+		   rcvLen);
+	    return 0;
+	}
+		
+	skb = dev_alloc_skb(rcvLen+5);
+	if (skb == NULL) {
+	    pr_debug("netwave_rx: Could not allocate an sk_buff of "
+		  "length %d\n", rcvLen);
+	    ++dev->stats.rx_dropped;
+	    /* Tell the adapter to skip the packet */
+	    wait_WOC(iobase);
+	    writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
+	    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+	    return 0;
+	}
+
+	skb_reserve( skb, 2);  /* Align IP on 16 byte */
+	skb_put( skb, rcvLen);
+
+	/* Copy packet fragments to the skb data area */
+	ptr = (u_char*) skb->data;
+	curBuffer = rcvList;
+	tmpcount = 0; 
+	while ( tmpcount < rcvLen) {
+	    /* Get length and offset of current buffer */
+	    dataCount  = get_uint16( ramBase+curBuffer+2);
+	    dataOffset = get_uint16( ramBase+curBuffer+4);
+		
+	    copy_from_pc( ptr + tmpcount,
+			  ramBase+curBuffer+dataOffset, dataCount);
+
+	    tmpcount += dataCount;
+		
+	    /* Point to next buffer */
+	    curBuffer = get_uint16(ramBase + curBuffer);
+	}
+	
+	skb->protocol = eth_type_trans(skb,dev);
+	/* Queue packet for network layer */
+	netif_rx(skb);
+
+	dev->stats.rx_packets++;
+	dev->stats.rx_bytes += rcvLen;
+
+	/* Got the packet, tell the adapter to skip it */
+	wait_WOC(iobase);
+	writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
+	writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+	pr_debug("Packet reception ok\n");
+    }
+    return 0;
+}
+
+static int netwave_open(struct net_device *dev) {
+    netwave_private *priv = netdev_priv(dev);
+    struct pcmcia_device *link = priv->p_dev;
+
+    dev_dbg(&link->dev, "netwave_open: starting.\n");
+    
+    if (!pcmcia_dev_present(link))
+	return -ENODEV;
+
+    link->open++;
+
+    netif_start_queue(dev);
+    netwave_reset(dev);
+	
+    return 0;
+}
+
+static int netwave_close(struct net_device *dev) {
+    netwave_private *priv = netdev_priv(dev);
+    struct pcmcia_device *link = priv->p_dev;
+
+    dev_dbg(&link->dev, "netwave_close: finishing.\n");
+
+    link->open--;
+    netif_stop_queue(dev);
+
+    return 0;
+}
+
+static struct pcmcia_device_id netwave_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("Xircom", "CreditCard Netwave", 0x2e3ee845, 0x54e28a28),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, netwave_ids);
+
+static struct pcmcia_driver netwave_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "netwave_cs",
+	},
+	.probe		= netwave_probe,
+	.remove		= netwave_detach,
+	.id_table       = netwave_ids,
+	.suspend	= netwave_suspend,
+	.resume		= netwave_resume,
+};
+
+static int __init init_netwave_cs(void)
+{
+	return pcmcia_register_driver(&netwave_driver);
+}
+
+static void __exit exit_netwave_cs(void)
+{
+	pcmcia_unregister_driver(&netwave_driver);
+}
+
+module_init(init_netwave_cs);
+module_exit(exit_netwave_cs);
+
+/* Set or clear the multicast filter for this adaptor.
+   num_addrs == -1	Promiscuous mode, receive all packets
+   num_addrs == 0	Normal mode, clear multicast list
+   num_addrs > 0	Multicast mode, receive normal and MC packets, and do
+   best-effort filtering.
+ */
+static void set_multicast_list(struct net_device *dev)
+{
+    unsigned int iobase = dev->base_addr;
+    netwave_private *priv = netdev_priv(dev);
+    u_char __iomem * ramBase = priv->ramBase;
+    u_char  rcvMode = 0;
+   
+#ifdef PCMCIA_DEBUG
+    {
+	xstatic int old;
+	if (old != dev->mc_count) {
+	    old = dev->mc_count;
+	    pr_debug("%s: setting Rx mode to %d addresses.\n",
+		  dev->name, dev->mc_count);
+	}
+    }
+#endif
+	
+    if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
+	/* Multicast Mode */
+	rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
+    } else if (dev->flags & IFF_PROMISC) {
+	/* Promiscous mode */
+	rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
+    } else {
+	/* Normal mode */
+	rcvMode = rxConfRxEna + rxConfBcast;
+    }
+	
+    /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/
+    /* Now set receive mode */
+    wait_WOC(iobase);
+    writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
+    writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1);
+    writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+}
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 42230e6..31a58e5 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -170,7 +170,7 @@
 	return ret;
 }
 
-struct const ethtool_ops cvm_oct_ethtool_ops = {
+const struct ethtool_ops cvm_oct_ethtool_ops = {
 	.get_drvinfo = cvm_oct_get_drvinfo,
 	.get_settings = cvm_oct_get_settings,
 	.set_settings = cvm_oct_set_settings,
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index 66190b0..00dc0f4 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -317,6 +317,6 @@
 			cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0);
 			cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0);
 		}
-		free_irq(8 + 46, &number_spi_ports);
+		free_irq(OCTEON_IRQ_RML, &number_spi_ports);
 	}
 }
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index b847951..492c502 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -111,6 +111,16 @@
 	"\tallows packets to be sent without lock contention in the packet\n"
 	"\tscheduler resulting in some cases in improved throughput.\n");
 
+
+/*
+ * The offset from mac_addr_base that should be used for the next port
+ * that is configured.  By convention, if any mgmt ports exist on the
+ * chip, they get the first mac addresses, The ports controlled by
+ * this driver are numbered sequencially following any mgmt addresses
+ * that may exist.
+ */
+static unsigned int cvm_oct_mac_addr_offset;
+
 /**
  * Periodic timer to check auto negotiation
  */
@@ -474,16 +484,30 @@
  */
 int cvm_oct_common_init(struct net_device *dev)
 {
-	static int count;
-	char mac[8] = { 0x00, 0x00,
-		octeon_bootinfo->mac_addr_base[0],
-		octeon_bootinfo->mac_addr_base[1],
-		octeon_bootinfo->mac_addr_base[2],
-		octeon_bootinfo->mac_addr_base[3],
-		octeon_bootinfo->mac_addr_base[4],
-		octeon_bootinfo->mac_addr_base[5] + count
-	};
 	struct octeon_ethernet *priv = netdev_priv(dev);
+	struct sockaddr sa;
+	u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) |
+		((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) |
+		((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) |
+		((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) |
+		((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) |
+		(u64)(octeon_bootinfo->mac_addr_base[5] & 0xff);
+
+	mac += cvm_oct_mac_addr_offset;
+	sa.sa_data[0] = (mac >> 40) & 0xff;
+	sa.sa_data[1] = (mac >> 32) & 0xff;
+	sa.sa_data[2] = (mac >> 24) & 0xff;
+	sa.sa_data[3] = (mac >> 16) & 0xff;
+	sa.sa_data[4] = (mac >> 8) & 0xff;
+	sa.sa_data[5] = mac & 0xff;
+
+	if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count)
+		printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:"
+			" %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
+			sa.sa_data[0] & 0xff, sa.sa_data[1] & 0xff,
+			sa.sa_data[2] & 0xff, sa.sa_data[3] & 0xff,
+			sa.sa_data[4] & 0xff, sa.sa_data[5] & 0xff);
+	cvm_oct_mac_addr_offset++;
 
 	/*
 	 * Force the interface to use the POW send if always_use_pow
@@ -496,14 +520,12 @@
 	if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
 		dev->features |= NETIF_F_IP_CSUM;
 
-	count++;
-
 	/* We do our own locking, Linux doesn't need to */
 	dev->features |= NETIF_F_LLTX;
 	SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops);
 
 	cvm_oct_mdio_setup_device(dev);
-	dev->netdev_ops->ndo_set_mac_address(dev, mac);
+	dev->netdev_ops->ndo_set_mac_address(dev, &sa);
 	dev->netdev_ops->ndo_change_mtu(dev, dev->mtu);
 
 	/*
@@ -620,6 +642,13 @@
 
 	pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION);
 
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+		cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */
+	else if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+		cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */
+	else
+		cvm_oct_mac_addr_offset = 0;
+
 	cvm_oct_proc_initialize();
 	cvm_oct_rx_initialize();
 	cvm_oct_configure_common_hw();
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index c94de31..f69b778 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -143,7 +143,6 @@
 	struct inode *inode = mapping->host;
 	struct pohmelfs_inode *pi = POHMELFS_I(inode);
 	struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
-	struct backing_dev_info *bdi = mapping->backing_dev_info;
 	int err = 0;
 	int done = 0;
 	int nr_pages;
@@ -152,11 +151,6 @@
 	int scanned = 0;
 	int range_whole = 0;
 
-	if (wbc->nonblocking && bdi_write_congested(bdi)) {
-		wbc->encountered_congestion = 1;
-		return 0;
-	}
-
 	if (wbc->range_cyclic) {
 		index = mapping->writeback_index; /* Start from prev offset */
 		end = -1;
@@ -248,10 +242,6 @@
 
 			if (wbc->nr_to_write <= 0)
 				done = 1;
-			if (wbc->nonblocking && bdi_write_congested(bdi)) {
-				wbc->encountered_congestion = 1;
-				done = 1;
-			}
 
 			continue;
 out_continue:
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 203c79b..3211dd3 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -1,6 +1,7 @@
 config RTL8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
 	depends on PCI && WLAN
-	depends on WIRELESS_EXT
+	select WIRELESS_EXT
+	select WEXT_PRIV
 	default N
 	---help---
diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO
index c09a916..a762e79 100644
--- a/drivers/staging/rtl8187se/TODO
+++ b/drivers/staging/rtl8187se/TODO
@@ -11,5 +11,4 @@
 - sparse fixes
 - integrate with drivers/net/wireless/rtl818x
 
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>.
+Please send any patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index 37e4fde..2ae3745 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -1,6 +1,7 @@
 config RTL8192E
 	tristate "RealTek RTL8192E Wireless LAN NIC driver"
 	depends on PCI && WLAN
-	depends on WIRELESS_EXT
+	select WIRELESS_EXT
+	select WEXT_PRIV
 	default N
 	---help---
diff --git a/drivers/staging/rtl8192su/TODO b/drivers/staging/rtl8192su/TODO
index b13be9e..f11eec7 100644
--- a/drivers/staging/rtl8192su/TODO
+++ b/drivers/staging/rtl8192su/TODO
@@ -14,5 +14,4 @@
 - sparse fixes
 - integrate with drivers/net/wireless/rtl818x
 
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>.
+Please send any patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/strip/Kconfig b/drivers/staging/strip/Kconfig
new file mode 100644
index 0000000..36257b5
--- /dev/null
+++ b/drivers/staging/strip/Kconfig
@@ -0,0 +1,22 @@
+config STRIP
+	tristate "STRIP (Metricom starmode radio IP)"
+	depends on INET
+	select WIRELESS_EXT
+	---help---
+	  Say Y if you have a Metricom radio and intend to use Starmode Radio
+	  IP. STRIP is a radio protocol developed for the MosquitoNet project
+	  to send Internet traffic using Metricom radios.  Metricom radios are
+	  small, battery powered, 100kbit/sec packet radio transceivers, about
+	  the size and weight of a cellular telephone. (You may also have heard
+	  them called "Metricom modems" but we avoid the term "modem" because
+	  it misleads many people into thinking that you can plug a Metricom
+	  modem into a phone line and use it as a modem.)
+
+	  You can use STRIP on any Linux machine with a serial port, although
+	  it is obviously most useful for people with laptop computers. If you
+	  think you might get a Metricom radio in the future, there is no harm
+	  in saying Y to STRIP now, except that it makes the kernel a bit
+	  bigger.
+
+	  To compile this as a module, choose M here: the module will be
+	  called strip.
diff --git a/drivers/staging/strip/Makefile b/drivers/staging/strip/Makefile
new file mode 100644
index 0000000..6417bdc
--- /dev/null
+++ b/drivers/staging/strip/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_STRIP) += strip.o
diff --git a/drivers/staging/strip/TODO b/drivers/staging/strip/TODO
new file mode 100644
index 0000000..9bd15a2
--- /dev/null
+++ b/drivers/staging/strip/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/staging/strip/strip.c b/drivers/staging/strip/strip.c
new file mode 100644
index 0000000..698aade
--- /dev/null
+++ b/drivers/staging/strip/strip.c
@@ -0,0 +1,2822 @@
+/*
+ * Copyright 1996 The Board of Trustees of The Leland Stanford
+ * Junior University. All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies.  Stanford University
+ * makes no representations about the suitability of this
+ * software for any purpose.  It is provided "as is" without
+ * express or implied warranty.
+ *
+ * strip.c	This module implements Starmode Radio IP (STRIP)
+ *		for kernel-based devices like TTY.  It interfaces between a
+ *		raw TTY, and the kernel's INET protocol layers (via DDI).
+ *
+ * Version:	@(#)strip.c	1.3	July 1997
+ *
+ * Author:	Stuart Cheshire <cheshire@cs.stanford.edu>
+ *
+ * Fixes:	v0.9 12th Feb 1996 (SC)
+ *		New byte stuffing (2+6 run-length encoding)
+ *		New watchdog timer task
+ *		New Protocol key (SIP0)
+ *		
+ *		v0.9.1 3rd March 1996 (SC)
+ *		Changed to dynamic device allocation -- no more compile
+ *		time (or boot time) limit on the number of STRIP devices.
+ *		
+ *		v0.9.2 13th March 1996 (SC)
+ *		Uses arp cache lookups (but doesn't send arp packets yet)
+ *		
+ *		v0.9.3 17th April 1996 (SC)
+ *		Fixed bug where STR_ERROR flag was getting set unneccessarily
+ *		(causing otherwise good packets to be unneccessarily dropped)
+ *		
+ *		v0.9.4 27th April 1996 (SC)
+ *		First attempt at using "&COMMAND" Starmode AT commands
+ *		
+ *		v0.9.5 29th May 1996 (SC)
+ *		First attempt at sending (unicast) ARP packets
+ *		
+ *		v0.9.6 5th June 1996 (Elliot)
+ *		Put "message level" tags in every "printk" statement
+ *		
+ *		v0.9.7 13th June 1996 (laik)
+ *		Added support for the /proc fs
+ *
+ *              v0.9.8 July 1996 (Mema)
+ *              Added packet logging
+ *
+ *              v1.0 November 1996 (SC)
+ *              Fixed (severe) memory leaks in the /proc fs code
+ *              Fixed race conditions in the logging code
+ *
+ *              v1.1 January 1997 (SC)
+ *              Deleted packet logging (use tcpdump instead)
+ *              Added support for Metricom Firmware v204 features
+ *              (like message checksums)
+ *
+ *              v1.2 January 1997 (SC)
+ *              Put portables list back in
+ *
+ *              v1.3 July 1997 (SC)
+ *              Made STRIP driver set the radio's baud rate automatically.
+ *              It is no longer necessarily to manually set the radio's
+ *              rate permanently to 115200 -- the driver handles setting
+ *              the rate automatically.
+ */
+
+#ifdef MODULE
+static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR";
+#else
+static const char StripVersion[] = "1.3A-STUART.CHESHIRE";
+#endif
+
+#define TICKLE_TIMERS 0
+#define EXT_COUNTERS 1
+
+
+/************************************************************************/
+/* Header files								*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+# include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/if_strip.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/rcupdate.h>
+#include <linux/compat.h>
+#include <net/arp.h>
+#include <net/net_namespace.h>
+
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/time.h>
+#include <linux/jiffies.h>
+
+/************************************************************************/
+/* Useful structures and definitions					*/
+
+/*
+ * A MetricomKey identifies the protocol being carried inside a Metricom
+ * Starmode packet.
+ */
+
+typedef union {
+	__u8 c[4];
+	__u32 l;
+} MetricomKey;
+
+/*
+ * An IP address can be viewed as four bytes in memory (which is what it is) or as
+ * a single 32-bit long (which is convenient for assignment, equality testing etc.)
+ */
+
+typedef union {
+	__u8 b[4];
+	__u32 l;
+} IPaddr;
+
+/*
+ * A MetricomAddressString is used to hold a printable representation of
+ * a Metricom address.
+ */
+
+typedef struct {
+	__u8 c[24];
+} MetricomAddressString;
+
+/* Encapsulation can expand packet of size x to 65/64x + 1
+ * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>"
+ *                           1 1   1-18  1  4         ?         1
+ * eg.                     <CR>*0000-1234*SIP0<encaps payload><CR>
+ * We allow 31 bytes for the stars, the key, the address and the <CR>s
+ */
+#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L)
+
+/*
+ * A STRIP_Header is never really sent over the radio, but making a dummy
+ * header for internal use within the kernel that looks like an Ethernet
+ * header makes certain other software happier. For example, tcpdump
+ * already understands Ethernet headers.
+ */
+
+typedef struct {
+	MetricomAddress dst_addr;	/* Destination address, e.g. "0000-1234"   */
+	MetricomAddress src_addr;	/* Source address, e.g. "0000-5678"        */
+	unsigned short protocol;	/* The protocol type, using Ethernet codes */
+} STRIP_Header;
+
+typedef struct {
+	char c[60];
+} MetricomNode;
+
+#define NODE_TABLE_SIZE 32
+typedef struct {
+	struct timeval timestamp;
+	int num_nodes;
+	MetricomNode node[NODE_TABLE_SIZE];
+} MetricomNodeTable;
+
+enum { FALSE = 0, TRUE = 1 };
+
+/*
+ * Holds the radio's firmware version.
+ */
+typedef struct {
+	char c[50];
+} FirmwareVersion;
+
+/*
+ * Holds the radio's serial number.
+ */
+typedef struct {
+	char c[18];
+} SerialNumber;
+
+/*
+ * Holds the radio's battery voltage.
+ */
+typedef struct {
+	char c[11];
+} BatteryVoltage;
+
+typedef struct {
+	char c[8];
+} char8;
+
+enum {
+	NoStructure = 0,	/* Really old firmware */
+	StructuredMessages = 1,	/* Parsable AT response msgs */
+	ChecksummedMessages = 2	/* Parsable AT response msgs with checksums */
+};
+
+struct strip {
+	int magic;
+	/*
+	 * These are pointers to the malloc()ed frame buffers.
+	 */
+
+	unsigned char *rx_buff;	/* buffer for received IP packet */
+	unsigned char *sx_buff;	/* buffer for received serial data */
+	int sx_count;		/* received serial data counter */
+	int sx_size;		/* Serial buffer size           */
+	unsigned char *tx_buff;	/* transmitter buffer           */
+	unsigned char *tx_head;	/* pointer to next byte to XMIT */
+	int tx_left;		/* bytes left in XMIT queue     */
+	int tx_size;		/* Serial buffer size           */
+
+	/*
+	 * STRIP interface statistics.
+	 */
+
+	unsigned long rx_packets;	/* inbound frames counter       */
+	unsigned long tx_packets;	/* outbound frames counter      */
+	unsigned long rx_errors;	/* Parity, etc. errors          */
+	unsigned long tx_errors;	/* Planned stuff                */
+	unsigned long rx_dropped;	/* No memory for skb            */
+	unsigned long tx_dropped;	/* When MTU change              */
+	unsigned long rx_over_errors;	/* Frame bigger than STRIP buf. */
+
+	unsigned long pps_timer;	/* Timer to determine pps       */
+	unsigned long rx_pps_count;	/* Counter to determine pps     */
+	unsigned long tx_pps_count;	/* Counter to determine pps     */
+	unsigned long sx_pps_count;	/* Counter to determine pps     */
+	unsigned long rx_average_pps;	/* rx packets per second * 8    */
+	unsigned long tx_average_pps;	/* tx packets per second * 8    */
+	unsigned long sx_average_pps;	/* sent packets per second * 8  */
+
+#ifdef EXT_COUNTERS
+	unsigned long rx_bytes;		/* total received bytes */
+	unsigned long tx_bytes;		/* total received bytes */
+	unsigned long rx_rbytes;	/* bytes thru radio i/f */
+	unsigned long tx_rbytes;	/* bytes thru radio i/f */
+	unsigned long rx_sbytes;	/* tot bytes thru serial i/f */
+	unsigned long tx_sbytes;	/* tot bytes thru serial i/f */
+	unsigned long rx_ebytes;	/* tot stat/err bytes */
+	unsigned long tx_ebytes;	/* tot stat/err bytes */
+#endif
+
+	/*
+	 * Internal variables.
+	 */
+
+	struct list_head  list;		/* Linked list of devices */
+
+	int discard;			/* Set if serial error          */
+	int working;			/* Is radio working correctly?  */
+	int firmware_level;		/* Message structuring level    */
+	int next_command;		/* Next periodic command        */
+	unsigned int user_baud;		/* The user-selected baud rate  */
+	int mtu;			/* Our mtu (to spot changes!)   */
+	long watchdog_doprobe;		/* Next time to test the radio  */
+	long watchdog_doreset;		/* Time to do next reset        */
+	long gratuitous_arp;		/* Time to send next ARP refresh */
+	long arp_interval;		/* Next ARP interval            */
+	struct timer_list idle_timer;	/* For periodic wakeup calls    */
+	MetricomAddress true_dev_addr;	/* True address of radio        */
+	int manual_dev_addr;		/* Hack: See note below         */
+
+	FirmwareVersion firmware_version;	/* The radio's firmware version */
+	SerialNumber serial_number;	/* The radio's serial number    */
+	BatteryVoltage battery_voltage;	/* The radio's battery voltage  */
+
+	/*
+	 * Other useful structures.
+	 */
+
+	struct tty_struct *tty;		/* ptr to TTY structure         */
+	struct net_device *dev;		/* Our device structure         */
+
+	/*
+	 * Neighbour radio records
+	 */
+
+	MetricomNodeTable portables;
+	MetricomNodeTable poletops;
+};
+
+/*
+ * Note: manual_dev_addr hack
+ * 
+ * It is not possible to change the hardware address of a Metricom radio,
+ * or to send packets with a user-specified hardware source address, thus
+ * trying to manually set a hardware source address is a questionable
+ * thing to do.  However, if the user *does* manually set the hardware
+ * source address of a STRIP interface, then the kernel will believe it,
+ * and use it in certain places. For example, the hardware address listed
+ * by ifconfig will be the manual address, not the true one.
+ * (Both addresses are listed in /proc/net/strip.)
+ * Also, ARP packets will be sent out giving the user-specified address as
+ * the source address, not the real address. This is dangerous, because
+ * it means you won't receive any replies -- the ARP replies will go to
+ * the specified address, which will be some other radio. The case where
+ * this is useful is when that other radio is also connected to the same
+ * machine. This allows you to connect a pair of radios to one machine,
+ * and to use one exclusively for inbound traffic, and the other
+ * exclusively for outbound traffic. Pretty neat, huh?
+ * 
+ * Here's the full procedure to set this up:
+ * 
+ * 1. "slattach" two interfaces, e.g. st0 for outgoing packets,
+ *    and st1 for incoming packets
+ * 
+ * 2. "ifconfig" st0 (outbound radio) to have the hardware address
+ *    which is the real hardware address of st1 (inbound radio).
+ *    Now when it sends out packets, it will masquerade as st1, and
+ *    replies will be sent to that radio, which is exactly what we want.
+ * 
+ * 3. Set the route table entry ("route add default ..." or
+ *    "route add -net ...", as appropriate) to send packets via the st0
+ *    interface (outbound radio). Do not add any route which sends packets
+ *    out via the st1 interface -- that radio is for inbound traffic only.
+ * 
+ * 4. "ifconfig" st1 (inbound radio) to have hardware address zero.
+ *    This tells the STRIP driver to "shut down" that interface and not
+ *    send any packets through it. In particular, it stops sending the
+ *    periodic gratuitous ARP packets that a STRIP interface normally sends.
+ *    Also, when packets arrive on that interface, it will search the
+ *    interface list to see if there is another interface who's manual
+ *    hardware address matches its own real address (i.e. st0 in this
+ *    example) and if so it will transfer ownership of the skbuff to
+ *    that interface, so that it looks to the kernel as if the packet
+ *    arrived on that interface. This is necessary because when the
+ *    kernel sends an ARP packet on st0, it expects to get a reply on
+ *    st0, and if it sees the reply come from st1 then it will ignore
+ *    it (to be accurate, it puts the entry in the ARP table, but
+ *    labelled in such a way that st0 can't use it).
+ * 
+ * Thanks to Petros Maniatis for coming up with the idea of splitting
+ * inbound and outbound traffic between two interfaces, which turned
+ * out to be really easy to implement, even if it is a bit of a hack.
+ * 
+ * Having set a manual address on an interface, you can restore it
+ * to automatic operation (where the address is automatically kept
+ * consistent with the real address of the radio) by setting a manual
+ * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF"
+ * This 'turns off' manual override mode for the device address.
+ * 
+ * Note: The IEEE 802 headers reported in tcpdump will show the *real*
+ * radio addresses the packets were sent and received from, so that you
+ * can see what is really going on with packets, and which interfaces
+ * they are really going through.
+ */
+
+
+/************************************************************************/
+/* Constants								*/
+
+/*
+ * CommandString1 works on all radios
+ * Other CommandStrings are only used with firmware that provides structured responses.
+ * 
+ * ats319=1 Enables Info message for node additions and deletions
+ * ats319=2 Enables Info message for a new best node
+ * ats319=4 Enables checksums
+ * ats319=8 Enables ACK messages
+ */
+
+static const int MaxCommandStringLength = 32;
+static const int CompatibilityCommand = 1;
+
+static const char CommandString0[] = "*&COMMAND*ATS319=7";	/* Turn on checksums & info messages */
+static const char CommandString1[] = "*&COMMAND*ATS305?";	/* Query radio name */
+static const char CommandString2[] = "*&COMMAND*ATS325?";	/* Query battery voltage */
+static const char CommandString3[] = "*&COMMAND*ATS300?";	/* Query version information */
+static const char CommandString4[] = "*&COMMAND*ATS311?";	/* Query poletop list */
+static const char CommandString5[] = "*&COMMAND*AT~LA";		/* Query portables list */
+typedef struct {
+	const char *string;
+	long length;
+} StringDescriptor;
+
+static const StringDescriptor CommandString[] = {
+	{CommandString0, sizeof(CommandString0) - 1},
+	{CommandString1, sizeof(CommandString1) - 1},
+	{CommandString2, sizeof(CommandString2) - 1},
+	{CommandString3, sizeof(CommandString3) - 1},
+	{CommandString4, sizeof(CommandString4) - 1},
+	{CommandString5, sizeof(CommandString5) - 1}
+};
+
+#define GOT_ALL_RADIO_INFO(S)      \
+    ((S)->firmware_version.c[0] && \
+     (S)->battery_voltage.c[0]  && \
+     memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address)))
+
+static const char hextable[16] = "0123456789ABCDEF";
+
+static const MetricomAddress zero_address;
+static const MetricomAddress broadcast_address =
+    { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };
+
+static const MetricomKey SIP0Key = { "SIP0" };
+static const MetricomKey ARP0Key = { "ARP0" };
+static const MetricomKey ATR_Key = { "ATR " };
+static const MetricomKey ACK_Key = { "ACK_" };
+static const MetricomKey INF_Key = { "INF_" };
+static const MetricomKey ERR_Key = { "ERR_" };
+
+static const long MaxARPInterval = 60 * HZ;	/* One minute */
+
+/*
+ * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for
+ * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion
+ * for STRIP encoding, that translates to a maximum payload MTU of 1155.
+ * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes
+ * long, including IP header, UDP header, and NFS header. Setting the STRIP
+ * MTU to 1152 allows us to send default sized NFS packets without fragmentation.
+ */
+static const unsigned short MAX_SEND_MTU = 1152;
+static const unsigned short MAX_RECV_MTU = 1500;	/* Hoping for Ethernet sized packets in the future! */
+static const unsigned short DEFAULT_STRIP_MTU = 1152;
+static const int STRIP_MAGIC = 0x5303;
+static const long LongTime = 0x7FFFFFFF;
+
+/************************************************************************/
+/* Global variables							*/
+
+static LIST_HEAD(strip_list);
+static DEFINE_SPINLOCK(strip_lock);
+
+/************************************************************************/
+/* Macros								*/
+
+/* Returns TRUE if text T begins with prefix P */
+#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1))
+
+/* Returns TRUE if text T of length L is equal to string S */
+#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1))
+
+#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' :      \
+                    (X)>='a' && (X)<='f' ? (X)-'a'+10 :   \
+                    (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 )
+
+#define READHEX16(X) ((__u16)(READHEX(X)))
+
+#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0)
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+#define JIFFIE_TO_SEC(X) ((X) / HZ)
+
+
+/************************************************************************/
+/* Utility routines							*/
+
+static int arp_query(unsigned char *haddr, u32 paddr,
+		     struct net_device *dev)
+{
+	struct neighbour *neighbor_entry;
+	int ret = 0;
+
+	neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev);
+
+	if (neighbor_entry != NULL) {
+		neighbor_entry->used = jiffies;
+		if (neighbor_entry->nud_state & NUD_VALID) {
+			memcpy(haddr, neighbor_entry->ha, dev->addr_len);
+			ret = 1;
+		}
+		neigh_release(neighbor_entry);
+	}
+	return ret;
+}
+
+static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr,
+		     __u8 * end)
+{
+	static const int MAX_DumpData = 80;
+	__u8 pkt_text[MAX_DumpData], *p = pkt_text;
+
+	*p++ = '\"';
+
+	while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) {
+		if (*ptr == '\\') {
+			*p++ = '\\';
+			*p++ = '\\';
+		} else {
+			if (*ptr >= 32 && *ptr <= 126) {
+				*p++ = *ptr;
+			} else {
+				sprintf(p, "\\%02X", *ptr);
+				p += 3;
+			}
+		}
+		ptr++;
+	}
+
+	if (ptr == end)
+		*p++ = '\"';
+	*p++ = 0;
+
+	printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text);
+}
+
+
+/************************************************************************/
+/* Byte stuffing/unstuffing routines					*/
+
+/* Stuffing scheme:
+ * 00    Unused (reserved character)
+ * 01-3F Run of 2-64 different characters
+ * 40-7F Run of 1-64 different characters plus a single zero at the end
+ * 80-BF Run of 1-64 of the same character
+ * C0-FF Run of 1-64 zeroes (ASCII 0)
+ */
+
+typedef enum {
+	Stuff_Diff = 0x00,
+	Stuff_DiffZero = 0x40,
+	Stuff_Same = 0x80,
+	Stuff_Zero = 0xC0,
+	Stuff_NoCode = 0xFF,	/* Special code, meaning no code selected */
+
+	Stuff_CodeMask = 0xC0,
+	Stuff_CountMask = 0x3F,
+	Stuff_MaxCount = 0x3F,
+	Stuff_Magic = 0x0D	/* The value we are eliminating */
+} StuffingCode;
+
+/* StuffData encodes the data starting at "src" for "length" bytes.
+ * It writes it to the buffer pointed to by "dst" (which must be at least
+ * as long as 1 + 65/64 of the input length). The output may be up to 1.6%
+ * larger than the input for pathological input, but will usually be smaller.
+ * StuffData returns the new value of the dst pointer as its result.
+ * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state
+ * between calls, allowing an encoded packet to be incrementally built up
+ * from small parts. On the first call, the "__u8 *" pointed to should be
+ * initialized to NULL; between subsequent calls the calling routine should
+ * leave the value alone and simply pass it back unchanged so that the
+ * encoder can recover its current state.
+ */
+
+#define StuffData_FinishBlock(X) \
+(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode)
+
+static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst,
+		       __u8 ** code_ptr_ptr)
+{
+	__u8 *end = src + length;
+	__u8 *code_ptr = *code_ptr_ptr;
+	__u8 code = Stuff_NoCode, count = 0;
+
+	if (!length)
+		return (dst);
+
+	if (code_ptr) {
+		/*
+		 * Recover state from last call, if applicable
+		 */
+		code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask;
+		count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask;
+	}
+
+	while (src < end) {
+		switch (code) {
+			/* Stuff_NoCode: If no current code, select one */
+		case Stuff_NoCode:
+			/* Record where we're going to put this code */
+			code_ptr = dst++;
+			count = 0;	/* Reset the count (zero means one instance) */
+			/* Tentatively start a new block */
+			if (*src == 0) {
+				code = Stuff_Zero;
+				src++;
+			} else {
+				code = Stuff_Same;
+				*dst++ = *src++ ^ Stuff_Magic;
+			}
+			/* Note: We optimistically assume run of same -- */
+			/* which will be fixed later in Stuff_Same */
+			/* if it turns out not to be true. */
+			break;
+
+			/* Stuff_Zero: We already have at least one zero encoded */
+		case Stuff_Zero:
+			/* If another zero, count it, else finish this code block */
+			if (*src == 0) {
+				count++;
+				src++;
+			} else {
+				StuffData_FinishBlock(Stuff_Zero + count);
+			}
+			break;
+
+			/* Stuff_Same: We already have at least one byte encoded */
+		case Stuff_Same:
+			/* If another one the same, count it */
+			if ((*src ^ Stuff_Magic) == code_ptr[1]) {
+				count++;
+				src++;
+				break;
+			}
+			/* else, this byte does not match this block. */
+			/* If we already have two or more bytes encoded, finish this code block */
+			if (count) {
+				StuffData_FinishBlock(Stuff_Same + count);
+				break;
+			}
+			/* else, we only have one so far, so switch to Stuff_Diff code */
+			code = Stuff_Diff;
+			/* and fall through to Stuff_Diff case below
+			 * Note cunning cleverness here: case Stuff_Diff compares 
+			 * the current character with the previous two to see if it
+			 * has a run of three the same. Won't this be an error if
+			 * there aren't two previous characters stored to compare with?
+			 * No. Because we know the current character is *not* the same
+			 * as the previous one, the first test below will necessarily
+			 * fail and the send half of the "if" won't be executed.
+			 */
+
+			/* Stuff_Diff: We have at least two *different* bytes encoded */
+		case Stuff_Diff:
+			/* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */
+			if (*src == 0) {
+				StuffData_FinishBlock(Stuff_DiffZero +
+						      count);
+			}
+			/* else, if we have three in a row, it is worth starting a Stuff_Same block */
+			else if ((*src ^ Stuff_Magic) == dst[-1]
+				 && dst[-1] == dst[-2]) {
+				/* Back off the last two characters we encoded */
+				code += count - 2;
+				/* Note: "Stuff_Diff + 0" is an illegal code */
+				if (code == Stuff_Diff + 0) {
+					code = Stuff_Same + 0;
+				}
+				StuffData_FinishBlock(code);
+				code_ptr = dst - 2;
+				/* dst[-1] already holds the correct value */
+				count = 2;	/* 2 means three bytes encoded */
+				code = Stuff_Same;
+			}
+			/* else, another different byte, so add it to the block */
+			else {
+				*dst++ = *src ^ Stuff_Magic;
+				count++;
+			}
+			src++;	/* Consume the byte */
+			break;
+		}
+		if (count == Stuff_MaxCount) {
+			StuffData_FinishBlock(code + count);
+		}
+	}
+	if (code == Stuff_NoCode) {
+		*code_ptr_ptr = NULL;
+	} else {
+		*code_ptr_ptr = code_ptr;
+		StuffData_FinishBlock(code + count);
+	}
+	return (dst);
+}
+
+/*
+ * UnStuffData decodes the data at "src", up to (but not including) "end".
+ * It writes the decoded data into the buffer pointed to by "dst", up to a
+ * maximum of "dst_length", and returns the new value of "src" so that a
+ * follow-on call can read more data, continuing from where the first left off.
+ * 
+ * There are three types of results:
+ * 1. The source data runs out before extracting "dst_length" bytes:
+ *    UnStuffData returns NULL to indicate failure.
+ * 2. The source data produces exactly "dst_length" bytes:
+ *    UnStuffData returns new_src = end to indicate that all bytes were consumed.
+ * 3. "dst_length" bytes are extracted, with more remaining.
+ *    UnStuffData returns new_src < end to indicate that there are more bytes
+ *    to be read.
+ * 
+ * Note: The decoding may be destructive, in that it may alter the source
+ * data in the process of decoding it (this is necessary to allow a follow-on
+ * call to resume correctly).
+ */
+
+static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst,
+			 __u32 dst_length)
+{
+	__u8 *dst_end = dst + dst_length;
+	/* Sanity check */
+	if (!src || !end || !dst || !dst_length)
+		return (NULL);
+	while (src < end && dst < dst_end) {
+		int count = (*src ^ Stuff_Magic) & Stuff_CountMask;
+		switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) {
+		case Stuff_Diff:
+			if (src + 1 + count >= end)
+				return (NULL);
+			do {
+				*dst++ = *++src ^ Stuff_Magic;
+			}
+			while (--count >= 0 && dst < dst_end);
+			if (count < 0)
+				src += 1;
+			else {
+				if (count == 0)
+					*src = Stuff_Same ^ Stuff_Magic;
+				else
+					*src =
+					    (Stuff_Diff +
+					     count) ^ Stuff_Magic;
+			}
+			break;
+		case Stuff_DiffZero:
+			if (src + 1 + count >= end)
+				return (NULL);
+			do {
+				*dst++ = *++src ^ Stuff_Magic;
+			}
+			while (--count >= 0 && dst < dst_end);
+			if (count < 0)
+				*src = Stuff_Zero ^ Stuff_Magic;
+			else
+				*src =
+				    (Stuff_DiffZero + count) ^ Stuff_Magic;
+			break;
+		case Stuff_Same:
+			if (src + 1 >= end)
+				return (NULL);
+			do {
+				*dst++ = src[1] ^ Stuff_Magic;
+			}
+			while (--count >= 0 && dst < dst_end);
+			if (count < 0)
+				src += 2;
+			else
+				*src = (Stuff_Same + count) ^ Stuff_Magic;
+			break;
+		case Stuff_Zero:
+			do {
+				*dst++ = 0;
+			}
+			while (--count >= 0 && dst < dst_end);
+			if (count < 0)
+				src += 1;
+			else
+				*src = (Stuff_Zero + count) ^ Stuff_Magic;
+			break;
+		}
+	}
+	if (dst < dst_end)
+		return (NULL);
+	else
+		return (src);
+}
+
+
+/************************************************************************/
+/* General routines for STRIP						*/
+
+/*
+ * set_baud sets the baud rate to the rate defined by baudcode
+ */
+static void set_baud(struct tty_struct *tty, speed_t baudrate)
+{
+	struct ktermios old_termios;
+
+	mutex_lock(&tty->termios_mutex);
+	old_termios =*(tty->termios);
+	tty_encode_baud_rate(tty, baudrate, baudrate);
+	tty->ops->set_termios(tty, &old_termios);
+	mutex_unlock(&tty->termios_mutex);
+}
+
+/*
+ * Convert a string to a Metricom Address.
+ */
+
+#define IS_RADIO_ADDRESS(p) (                                                 \
+  isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \
+  (p)[4] == '-' &&                                                            \
+  isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8])    )
+
+static int string_to_radio_address(MetricomAddress * addr, __u8 * p)
+{
+	if (!IS_RADIO_ADDRESS(p))
+		return (1);
+	addr->c[0] = 0;
+	addr->c[1] = 0;
+	addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]);
+	addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]);
+	addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]);
+	addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]);
+	return (0);
+}
+
+/*
+ * Convert a Metricom Address to a string.
+ */
+
+static __u8 *radio_address_to_string(const MetricomAddress * addr,
+				     MetricomAddressString * p)
+{
+	sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3],
+		addr->c[4], addr->c[5]);
+	return (p->c);
+}
+
+/*
+ * Note: Must make sure sx_size is big enough to receive a stuffed
+ * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's
+ * big enough to receive a large radio neighbour list (currently 4K).
+ */
+
+static int allocate_buffers(struct strip *strip_info, int mtu)
+{
+	struct net_device *dev = strip_info->dev;
+	int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096);
+	int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength;
+	__u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC);
+	__u8 *s = kmalloc(sx_size, GFP_ATOMIC);
+	__u8 *t = kmalloc(tx_size, GFP_ATOMIC);
+	if (r && s && t) {
+		strip_info->rx_buff = r;
+		strip_info->sx_buff = s;
+		strip_info->tx_buff = t;
+		strip_info->sx_size = sx_size;
+		strip_info->tx_size = tx_size;
+		strip_info->mtu = dev->mtu = mtu;
+		return (1);
+	}
+	kfree(r);
+	kfree(s);
+	kfree(t);
+	return (0);
+}
+
+/*
+ * MTU has been changed by the IP layer. 
+ * We could be in
+ * an upcall from the tty driver, or in an ip packet queue.
+ */
+static int strip_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct strip *strip_info = netdev_priv(dev);
+	int old_mtu = strip_info->mtu;
+	unsigned char *orbuff = strip_info->rx_buff;
+	unsigned char *osbuff = strip_info->sx_buff;
+	unsigned char *otbuff = strip_info->tx_buff;
+
+	if (new_mtu > MAX_SEND_MTU) {
+		printk(KERN_ERR
+		       "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
+		       strip_info->dev->name, MAX_SEND_MTU);
+		return -EINVAL;
+	}
+
+	spin_lock_bh(&strip_lock);
+	if (!allocate_buffers(strip_info, new_mtu)) {
+		printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n",
+		       strip_info->dev->name);
+		spin_unlock_bh(&strip_lock);
+		return -ENOMEM;
+	}
+
+	if (strip_info->sx_count) {
+		if (strip_info->sx_count <= strip_info->sx_size)
+			memcpy(strip_info->sx_buff, osbuff,
+			       strip_info->sx_count);
+		else {
+			strip_info->discard = strip_info->sx_count;
+			strip_info->rx_over_errors++;
+		}
+	}
+
+	if (strip_info->tx_left) {
+		if (strip_info->tx_left <= strip_info->tx_size)
+			memcpy(strip_info->tx_buff, strip_info->tx_head,
+			       strip_info->tx_left);
+		else {
+			strip_info->tx_left = 0;
+			strip_info->tx_dropped++;
+		}
+	}
+	strip_info->tx_head = strip_info->tx_buff;
+	spin_unlock_bh(&strip_lock);
+
+	printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
+	       strip_info->dev->name, old_mtu, strip_info->mtu);
+
+	kfree(orbuff);
+	kfree(osbuff);
+	kfree(otbuff);
+	return 0;
+}
+
+static void strip_unlock(struct strip *strip_info)
+{
+	/*
+	 * Set the timer to go off in one second.
+	 */
+	strip_info->idle_timer.expires = jiffies + 1 * HZ;
+	add_timer(&strip_info->idle_timer);
+	netif_wake_queue(strip_info->dev);
+}
+
+
+
+/*
+ * If the time is in the near future, time_delta prints the number of
+ * seconds to go into the buffer and returns the address of the buffer.
+ * If the time is not in the near future, it returns the address of the
+ * string "Not scheduled" The buffer must be long enough to contain the
+ * ascii representation of the number plus 9 charactes for the " seconds"
+ * and the null character.
+ */
+#ifdef CONFIG_PROC_FS
+static char *time_delta(char buffer[], long time)
+{
+	time -= jiffies;
+	if (time > LongTime / 2)
+		return ("Not scheduled");
+	if (time < 0)
+		time = 0;	/* Don't print negative times */
+	sprintf(buffer, "%ld seconds", time / HZ);
+	return (buffer);
+}
+
+/* get Nth element of the linked list */
+static struct strip *strip_get_idx(loff_t pos) 
+{
+	struct strip *str;
+	int i = 0;
+
+	list_for_each_entry_rcu(str, &strip_list, list) {
+		if (pos == i)
+			return str;
+		++i;
+	}
+	return NULL;
+}
+
+static void *strip_seq_start(struct seq_file *seq, loff_t *pos)
+	__acquires(RCU)
+{
+	rcu_read_lock();
+	return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct list_head *l;
+	struct strip *s;
+
+	++*pos;
+	if (v == SEQ_START_TOKEN)
+		return strip_get_idx(1);
+
+	s = v;
+	l = &s->list;
+	list_for_each_continue_rcu(l, &strip_list) {
+		return list_entry(l, struct strip, list);
+	}
+	return NULL;
+}
+
+static void strip_seq_stop(struct seq_file *seq, void *v)
+	__releases(RCU)
+{
+	rcu_read_unlock();
+}
+
+static void strip_seq_neighbours(struct seq_file *seq,
+			   const MetricomNodeTable * table,
+			   const char *title)
+{
+	/* We wrap this in a do/while loop, so if the table changes */
+	/* while we're reading it, we just go around and try again. */
+	struct timeval t;
+
+	do {
+		int i;
+		t = table->timestamp;
+		if (table->num_nodes)
+			seq_printf(seq, "\n %s\n", title);
+		for (i = 0; i < table->num_nodes; i++) {
+			MetricomNode node;
+
+			spin_lock_bh(&strip_lock);
+			node = table->node[i];
+			spin_unlock_bh(&strip_lock);
+			seq_printf(seq, "  %s\n", node.c);
+		}
+	} while (table->timestamp.tv_sec != t.tv_sec
+		 || table->timestamp.tv_usec != t.tv_usec);
+}
+
+/*
+ * This function prints radio status information via the seq_file
+ * interface.  The interface takes care of buffer size and over
+ * run issues. 
+ *
+ * The buffer in seq_file is PAGESIZE (4K) 
+ * so this routine should never print more or it will get truncated.
+ * With the maximum of 32 portables and 32 poletops
+ * reported, the routine outputs 3107 bytes into the buffer.
+ */
+static void strip_seq_status_info(struct seq_file *seq, 
+				  const struct strip *strip_info)
+{
+	char temp[32];
+	MetricomAddressString addr_string;
+
+	/* First, we must copy all of our data to a safe place, */
+	/* in case a serial interrupt comes in and changes it.  */
+	int tx_left = strip_info->tx_left;
+	unsigned long rx_average_pps = strip_info->rx_average_pps;
+	unsigned long tx_average_pps = strip_info->tx_average_pps;
+	unsigned long sx_average_pps = strip_info->sx_average_pps;
+	int working = strip_info->working;
+	int firmware_level = strip_info->firmware_level;
+	long watchdog_doprobe = strip_info->watchdog_doprobe;
+	long watchdog_doreset = strip_info->watchdog_doreset;
+	long gratuitous_arp = strip_info->gratuitous_arp;
+	long arp_interval = strip_info->arp_interval;
+	FirmwareVersion firmware_version = strip_info->firmware_version;
+	SerialNumber serial_number = strip_info->serial_number;
+	BatteryVoltage battery_voltage = strip_info->battery_voltage;
+	char *if_name = strip_info->dev->name;
+	MetricomAddress true_dev_addr = strip_info->true_dev_addr;
+	MetricomAddress dev_dev_addr =
+	    *(MetricomAddress *) strip_info->dev->dev_addr;
+	int manual_dev_addr = strip_info->manual_dev_addr;
+#ifdef EXT_COUNTERS
+	unsigned long rx_bytes = strip_info->rx_bytes;
+	unsigned long tx_bytes = strip_info->tx_bytes;
+	unsigned long rx_rbytes = strip_info->rx_rbytes;
+	unsigned long tx_rbytes = strip_info->tx_rbytes;
+	unsigned long rx_sbytes = strip_info->rx_sbytes;
+	unsigned long tx_sbytes = strip_info->tx_sbytes;
+	unsigned long rx_ebytes = strip_info->rx_ebytes;
+	unsigned long tx_ebytes = strip_info->tx_ebytes;
+#endif
+
+	seq_printf(seq, "\nInterface name\t\t%s\n", if_name);
+	seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No");
+	radio_address_to_string(&true_dev_addr, &addr_string);
+	seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c);
+	if (manual_dev_addr) {
+		radio_address_to_string(&dev_dev_addr, &addr_string);
+		seq_printf(seq, " Device address:\t%s\n", addr_string.c);
+	}
+	seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" :
+		     !firmware_level ? "Should be upgraded" :
+		     firmware_version.c);
+	if (firmware_level >= ChecksummedMessages)
+		seq_printf(seq, " (Checksums Enabled)");
+	seq_printf(seq, "\n");
+	seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c);
+	seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c);
+	seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left);
+	seq_printf(seq, " Receive packet rate:   %ld packets per second\n",
+		     rx_average_pps / 8);
+	seq_printf(seq, " Transmit packet rate:  %ld packets per second\n",
+		     tx_average_pps / 8);
+	seq_printf(seq, " Sent packet rate:      %ld packets per second\n",
+		     sx_average_pps / 8);
+	seq_printf(seq, " Next watchdog probe:\t%s\n",
+		     time_delta(temp, watchdog_doprobe));
+	seq_printf(seq, " Next watchdog reset:\t%s\n",
+		     time_delta(temp, watchdog_doreset));
+	seq_printf(seq, " Next gratuitous ARP:\t");
+
+	if (!memcmp
+	    (strip_info->dev->dev_addr, zero_address.c,
+	     sizeof(zero_address)))
+		seq_printf(seq, "Disabled\n");
+	else {
+		seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp));
+		seq_printf(seq, " Next ARP interval:\t%ld seconds\n",
+			     JIFFIE_TO_SEC(arp_interval));
+	}
+
+	if (working) {
+#ifdef EXT_COUNTERS
+		seq_printf(seq, "\n");
+		seq_printf(seq,
+			     " Total bytes:         \trx:\t%lu\ttx:\t%lu\n",
+			     rx_bytes, tx_bytes);
+		seq_printf(seq,
+			     "  thru radio:         \trx:\t%lu\ttx:\t%lu\n",
+			     rx_rbytes, tx_rbytes);
+		seq_printf(seq,
+			     "  thru serial port:   \trx:\t%lu\ttx:\t%lu\n",
+			     rx_sbytes, tx_sbytes);
+		seq_printf(seq,
+			     " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n",
+			     rx_ebytes, tx_ebytes);
+#endif
+		strip_seq_neighbours(seq, &strip_info->poletops,
+					"Poletops:");
+		strip_seq_neighbours(seq, &strip_info->portables,
+					"Portables:");
+	}
+}
+
+/*
+ * This function is exports status information from the STRIP driver through
+ * the /proc file system.
+ */
+static int strip_seq_show(struct seq_file *seq, void *v)
+{
+	if (v == SEQ_START_TOKEN)
+		seq_printf(seq, "strip_version: %s\n", StripVersion);
+	else
+		strip_seq_status_info(seq, (const struct strip *)v);
+	return 0;
+}
+
+
+static const struct seq_operations strip_seq_ops = {
+	.start = strip_seq_start,
+	.next  = strip_seq_next,
+	.stop  = strip_seq_stop,
+	.show  = strip_seq_show,
+};
+
+static int strip_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &strip_seq_ops);
+}
+
+static const struct file_operations strip_seq_fops = {
+	.owner	 = THIS_MODULE,
+	.open    = strip_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release,
+};
+#endif
+
+
+
+/************************************************************************/
+/* Sending routines							*/
+
+static void ResetRadio(struct strip *strip_info)
+{
+	struct tty_struct *tty = strip_info->tty;
+	static const char init[] = "ate0q1dt**starmode\r**";
+	StringDescriptor s = { init, sizeof(init) - 1 };
+
+	/* 
+	 * If the radio isn't working anymore,
+	 * we should clear the old status information.
+	 */
+	if (strip_info->working) {
+		printk(KERN_INFO "%s: No response: Resetting radio.\n",
+		       strip_info->dev->name);
+		strip_info->firmware_version.c[0] = '\0';
+		strip_info->serial_number.c[0] = '\0';
+		strip_info->battery_voltage.c[0] = '\0';
+		strip_info->portables.num_nodes = 0;
+		do_gettimeofday(&strip_info->portables.timestamp);
+		strip_info->poletops.num_nodes = 0;
+		do_gettimeofday(&strip_info->poletops.timestamp);
+	}
+
+	strip_info->pps_timer = jiffies;
+	strip_info->rx_pps_count = 0;
+	strip_info->tx_pps_count = 0;
+	strip_info->sx_pps_count = 0;
+	strip_info->rx_average_pps = 0;
+	strip_info->tx_average_pps = 0;
+	strip_info->sx_average_pps = 0;
+
+	/* Mark radio address as unknown */
+	*(MetricomAddress *) & strip_info->true_dev_addr = zero_address;
+	if (!strip_info->manual_dev_addr)
+		*(MetricomAddress *) strip_info->dev->dev_addr =
+		    zero_address;
+	strip_info->working = FALSE;
+	strip_info->firmware_level = NoStructure;
+	strip_info->next_command = CompatibilityCommand;
+	strip_info->watchdog_doprobe = jiffies + 10 * HZ;
+	strip_info->watchdog_doreset = jiffies + 1 * HZ;
+
+	/* If the user has selected a baud rate above 38.4 see what magic we have to do */
+	if (strip_info->user_baud > 38400) {
+		/*
+		 * Subtle stuff: Pay attention :-)
+		 * If the serial port is currently at the user's selected (>38.4) rate,
+		 * then we temporarily switch to 19.2 and issue the ATS304 command
+		 * to tell the radio to switch to the user's selected rate.
+		 * If the serial port is not currently at that rate, that means we just
+		 * issued the ATS304 command last time through, so this time we restore
+		 * the user's selected rate and issue the normal starmode reset string.
+		 */
+		if (strip_info->user_baud == tty_get_baud_rate(tty)) {
+			static const char b0[] = "ate0q1s304=57600\r";
+			static const char b1[] = "ate0q1s304=115200\r";
+			static const StringDescriptor baudstring[2] =
+			    { {b0, sizeof(b0) - 1}
+			, {b1, sizeof(b1) - 1}
+			};
+			set_baud(tty, 19200);
+			if (strip_info->user_baud == 57600)
+				s = baudstring[0];
+			else if (strip_info->user_baud == 115200)
+				s = baudstring[1];
+			else
+				s = baudstring[1];	/* For now */
+		} else
+			set_baud(tty, strip_info->user_baud);
+	}
+
+	tty->ops->write(tty, s.string, s.length);
+#ifdef EXT_COUNTERS
+	strip_info->tx_ebytes += s.length;
+#endif
+}
+
+/*
+ * Called by the driver when there's room for more data.  If we have
+ * more packets to send, we send them here.
+ */
+
+static void strip_write_some_more(struct tty_struct *tty)
+{
+	struct strip *strip_info = tty->disc_data;
+
+	/* First make sure we're connected. */
+	if (!strip_info || strip_info->magic != STRIP_MAGIC ||
+	    !netif_running(strip_info->dev))
+		return;
+
+	if (strip_info->tx_left > 0) {
+		int num_written =
+		    tty->ops->write(tty, strip_info->tx_head,
+				      strip_info->tx_left);
+		strip_info->tx_left -= num_written;
+		strip_info->tx_head += num_written;
+#ifdef EXT_COUNTERS
+		strip_info->tx_sbytes += num_written;
+#endif
+	} else {		/* Else start transmission of another packet */
+
+		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+		strip_unlock(strip_info);
+	}
+}
+
+static __u8 *add_checksum(__u8 * buffer, __u8 * end)
+{
+	__u16 sum = 0;
+	__u8 *p = buffer;
+	while (p < end)
+		sum += *p++;
+	end[3] = hextable[sum & 0xF];
+	sum >>= 4;
+	end[2] = hextable[sum & 0xF];
+	sum >>= 4;
+	end[1] = hextable[sum & 0xF];
+	sum >>= 4;
+	end[0] = hextable[sum & 0xF];
+	return (end + 4);
+}
+
+static unsigned char *strip_make_packet(unsigned char *buffer,
+					struct strip *strip_info,
+					struct sk_buff *skb)
+{
+	__u8 *ptr = buffer;
+	__u8 *stuffstate = NULL;
+	STRIP_Header *header = (STRIP_Header *) skb->data;
+	MetricomAddress haddr = header->dst_addr;
+	int len = skb->len - sizeof(STRIP_Header);
+	MetricomKey key;
+
+	/*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */
+
+	if (header->protocol == htons(ETH_P_IP))
+		key = SIP0Key;
+	else if (header->protocol == htons(ETH_P_ARP))
+		key = ARP0Key;
+	else {
+		printk(KERN_ERR
+		       "%s: strip_make_packet: Unknown packet type 0x%04X\n",
+		       strip_info->dev->name, ntohs(header->protocol));
+		return (NULL);
+	}
+
+	if (len > strip_info->mtu) {
+		printk(KERN_ERR
+		       "%s: Dropping oversized transmit packet: %d bytes\n",
+		       strip_info->dev->name, len);
+		return (NULL);
+	}
+
+	/*
+	 * If we're sending to ourselves, discard the packet.
+	 * (Metricom radios choke if they try to send a packet to their own address.)
+	 */
+	if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) {
+		printk(KERN_ERR "%s: Dropping packet addressed to self\n",
+		       strip_info->dev->name);
+		return (NULL);
+	}
+
+	/*
+	 * If this is a broadcast packet, send it to our designated Metricom
+	 * 'broadcast hub' radio (First byte of address being 0xFF means broadcast)
+	 */
+	if (haddr.c[0] == 0xFF) {
+		__be32 brd = 0;
+		struct in_device *in_dev;
+
+		rcu_read_lock();
+		in_dev = __in_dev_get_rcu(strip_info->dev);
+		if (in_dev == NULL) {
+			rcu_read_unlock();
+			return NULL;
+		}
+		if (in_dev->ifa_list)
+			brd = in_dev->ifa_list->ifa_broadcast;
+		rcu_read_unlock();
+
+		/* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
+		if (!arp_query(haddr.c, brd, strip_info->dev)) {
+			printk(KERN_ERR
+			       "%s: Unable to send packet (no broadcast hub configured)\n",
+			       strip_info->dev->name);
+			return (NULL);
+		}
+		/*
+		 * If we are the broadcast hub, don't bother sending to ourselves.
+		 * (Metricom radios choke if they try to send a packet to their own address.)
+		 */
+		if (!memcmp
+		    (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr)))
+			return (NULL);
+	}
+
+	*ptr++ = 0x0D;
+	*ptr++ = '*';
+	*ptr++ = hextable[haddr.c[2] >> 4];
+	*ptr++ = hextable[haddr.c[2] & 0xF];
+	*ptr++ = hextable[haddr.c[3] >> 4];
+	*ptr++ = hextable[haddr.c[3] & 0xF];
+	*ptr++ = '-';
+	*ptr++ = hextable[haddr.c[4] >> 4];
+	*ptr++ = hextable[haddr.c[4] & 0xF];
+	*ptr++ = hextable[haddr.c[5] >> 4];
+	*ptr++ = hextable[haddr.c[5] & 0xF];
+	*ptr++ = '*';
+	*ptr++ = key.c[0];
+	*ptr++ = key.c[1];
+	*ptr++ = key.c[2];
+	*ptr++ = key.c[3];
+
+	ptr =
+	    StuffData(skb->data + sizeof(STRIP_Header), len, ptr,
+		      &stuffstate);
+
+	if (strip_info->firmware_level >= ChecksummedMessages)
+		ptr = add_checksum(buffer + 1, ptr);
+
+	*ptr++ = 0x0D;
+	return (ptr);
+}
+
+static void strip_send(struct strip *strip_info, struct sk_buff *skb)
+{
+	MetricomAddress haddr;
+	unsigned char *ptr = strip_info->tx_buff;
+	int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0;
+	int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0
+	    && !doreset;
+	__be32 addr, brd;
+
+	/*
+	 * 1. If we have a packet, encapsulate it and put it in the buffer
+	 */
+	if (skb) {
+		char *newptr = strip_make_packet(ptr, strip_info, skb);
+		strip_info->tx_pps_count++;
+		if (!newptr)
+			strip_info->tx_dropped++;
+		else {
+			ptr = newptr;
+			strip_info->sx_pps_count++;
+			strip_info->tx_packets++;	/* Count another successful packet */
+#ifdef EXT_COUNTERS
+			strip_info->tx_bytes += skb->len;
+			strip_info->tx_rbytes += ptr - strip_info->tx_buff;
+#endif
+			/*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */
+			/*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */
+		}
+	}
+
+	/*
+	 * 2. If it is time for another tickle, tack it on, after the packet
+	 */
+	if (doprobe) {
+		StringDescriptor ts = CommandString[strip_info->next_command];
+#if TICKLE_TIMERS
+		{
+			struct timeval tv;
+			do_gettimeofday(&tv);
+			printk(KERN_INFO "**** Sending tickle string %d      at %02d.%06d\n",
+			       strip_info->next_command, tv.tv_sec % 100,
+			       tv.tv_usec);
+		}
+#endif
+		if (ptr == strip_info->tx_buff)
+			*ptr++ = 0x0D;
+
+		*ptr++ = '*';	/* First send "**" to provoke an error message */
+		*ptr++ = '*';
+
+		/* Then add the command */
+		memcpy(ptr, ts.string, ts.length);
+
+		/* Add a checksum ? */
+		if (strip_info->firmware_level < ChecksummedMessages)
+			ptr += ts.length;
+		else
+			ptr = add_checksum(ptr, ptr + ts.length);
+
+		*ptr++ = 0x0D;	/* Terminate the command with a <CR> */
+
+		/* Cycle to next periodic command? */
+		if (strip_info->firmware_level >= StructuredMessages)
+			if (++strip_info->next_command >=
+			    ARRAY_SIZE(CommandString))
+				strip_info->next_command = 0;
+#ifdef EXT_COUNTERS
+		strip_info->tx_ebytes += ts.length;
+#endif
+		strip_info->watchdog_doprobe = jiffies + 10 * HZ;
+		strip_info->watchdog_doreset = jiffies + 1 * HZ;
+		/*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
+	}
+
+	/*
+	 * 3. Set up the strip_info ready to send the data (if any).
+	 */
+	strip_info->tx_head = strip_info->tx_buff;
+	strip_info->tx_left = ptr - strip_info->tx_buff;
+	set_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags);
+	/*
+	 * 4. Debugging check to make sure we're not overflowing the buffer.
+	 */
+	if (strip_info->tx_size - strip_info->tx_left < 20)
+		printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n",
+		       strip_info->dev->name, strip_info->tx_left,
+		       strip_info->tx_size - strip_info->tx_left);
+
+	/*
+	 * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in
+	 * the buffer, strip_write_some_more will send it after the reset has finished
+	 */
+	if (doreset) {
+		ResetRadio(strip_info);
+		return;
+	}
+
+	if (1) {
+		struct in_device *in_dev;
+
+		brd = addr = 0;
+		rcu_read_lock();
+		in_dev = __in_dev_get_rcu(strip_info->dev);
+		if (in_dev) {
+			if (in_dev->ifa_list) {
+				brd = in_dev->ifa_list->ifa_broadcast;
+				addr = in_dev->ifa_list->ifa_local;
+			}
+		}
+		rcu_read_unlock();
+	}
+
+
+	/*
+	 * 6. If it is time for a periodic ARP, queue one up to be sent.
+	 * We only do this if:
+	 *  1. The radio is working
+	 *  2. It's time to send another periodic ARP
+	 *  3. We really know what our address is (and it is not manually set to zero)
+	 *  4. We have a designated broadcast address configured
+	 * If we queue up an ARP packet when we don't have a designated broadcast
+	 * address configured, then the packet will just have to be discarded in
+	 * strip_make_packet. This is not fatal, but it causes misleading information
+	 * to be displayed in tcpdump. tcpdump will report that periodic APRs are
+	 * being sent, when in fact they are not, because they are all being dropped
+	 * in the strip_make_packet routine.
+	 */
+	if (strip_info->working
+	    && (long) jiffies - strip_info->gratuitous_arp >= 0
+	    && memcmp(strip_info->dev->dev_addr, zero_address.c,
+		      sizeof(zero_address))
+	    && arp_query(haddr.c, brd, strip_info->dev)) {
+		/*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
+		   strip_info->dev->name, strip_info->arp_interval / HZ); */
+		strip_info->gratuitous_arp =
+		    jiffies + strip_info->arp_interval;
+		strip_info->arp_interval *= 2;
+		if (strip_info->arp_interval > MaxARPInterval)
+			strip_info->arp_interval = MaxARPInterval;
+		if (addr)
+			arp_send(ARPOP_REPLY, ETH_P_ARP, addr,	/* Target address of ARP packet is our address */
+				 strip_info->dev,	/* Device to send packet on */
+				 addr,	/* Source IP address this ARP packet comes from */
+				 NULL,	/* Destination HW address is NULL (broadcast it) */
+				 strip_info->dev->dev_addr,	/* Source HW address is our HW address */
+				 strip_info->dev->dev_addr);	/* Target HW address is our HW address (redundant) */
+	}
+
+	/*
+	 * 7. All ready. Start the transmission
+	 */
+	strip_write_some_more(strip_info->tty);
+}
+
+/* Encapsulate a datagram and kick it into a TTY queue. */
+static netdev_tx_t strip_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct strip *strip_info = netdev_priv(dev);
+
+	if (!netif_running(dev)) {
+		printk(KERN_ERR "%s: xmit call when iface is down\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	netif_stop_queue(dev);
+
+	del_timer(&strip_info->idle_timer);
+
+
+	if (time_after(jiffies, strip_info->pps_timer + HZ)) {
+		unsigned long t = jiffies - strip_info->pps_timer;
+		unsigned long rx_pps_count =
+			DIV_ROUND_CLOSEST(strip_info->rx_pps_count*HZ*8, t);
+		unsigned long tx_pps_count =
+			DIV_ROUND_CLOSEST(strip_info->tx_pps_count*HZ*8, t);
+		unsigned long sx_pps_count =
+			DIV_ROUND_CLOSEST(strip_info->sx_pps_count*HZ*8, t);
+
+		strip_info->pps_timer = jiffies;
+		strip_info->rx_pps_count = 0;
+		strip_info->tx_pps_count = 0;
+		strip_info->sx_pps_count = 0;
+
+		strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2;
+		strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2;
+		strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2;
+
+		if (rx_pps_count / 8 >= 10)
+			printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n",
+			       strip_info->dev->name, rx_pps_count / 8);
+		if (tx_pps_count / 8 >= 10)
+			printk(KERN_INFO "%s: WARNING: Tx        %ld packets per second.\n",
+			       strip_info->dev->name, tx_pps_count / 8);
+		if (sx_pps_count / 8 >= 10)
+			printk(KERN_INFO "%s: WARNING: Sending   %ld packets per second.\n",
+			       strip_info->dev->name, sx_pps_count / 8);
+	}
+
+	spin_lock_bh(&strip_lock);
+
+	strip_send(strip_info, skb);
+
+	spin_unlock_bh(&strip_lock);
+
+	if (skb)
+		dev_kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+/*
+ * IdleTask periodically calls strip_xmit, so even when we have no IP packets
+ * to send for an extended period of time, the watchdog processing still gets
+ * done to ensure that the radio stays in Starmode
+ */
+
+static void strip_IdleTask(unsigned long parameter)
+{
+	strip_xmit(NULL, (struct net_device *) parameter);
+}
+
+/*
+ * Create the MAC header for an arbitrary protocol layer
+ *
+ * saddr!=NULL        means use this specific address (n/a for Metricom)
+ * saddr==NULL        means use default device source address
+ * daddr!=NULL        means use this destination address
+ * daddr==NULL        means leave destination address alone
+ *                 (e.g. unresolved arp -- kernel will call
+ *                 rebuild_header later to fill in the address)
+ */
+
+static int strip_header(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, const void *daddr,
+			const void *saddr, unsigned len)
+{
+	struct strip *strip_info = netdev_priv(dev);
+	STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header));
+
+	/*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type,
+	   type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */
+
+	header->src_addr = strip_info->true_dev_addr;
+	header->protocol = htons(type);
+
+	/*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */
+
+	if (!daddr)
+		return (-dev->hard_header_len);
+
+	header->dst_addr = *(MetricomAddress *) daddr;
+	return (dev->hard_header_len);
+}
+
+/*
+ * Rebuild the MAC header. This is called after an ARP
+ * (or in future other address resolution) has completed on this
+ * sk_buff. We now let ARP fill in the other fields.
+ * I think this should return zero if packet is ready to send,
+ * or non-zero if it needs more time to do an address lookup
+ */
+
+static int strip_rebuild_header(struct sk_buff *skb)
+{
+#ifdef CONFIG_INET
+	STRIP_Header *header = (STRIP_Header *) skb->data;
+
+	/* Arp find returns zero if if knows the address, */
+	/* or if it doesn't know the address it sends an ARP packet and returns non-zero */
+	return arp_find(header->dst_addr.c, skb) ? 1 : 0;
+#else
+	return 0;
+#endif
+}
+
+
+/************************************************************************/
+/* Receiving routines							*/
+
+/*
+ * This function parses the response to the ATS300? command,
+ * extracting the radio version and serial number.
+ */
+static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+	__u8 *p, *value_begin, *value_end;
+	int len;
+
+	/* Determine the beginning of the second line of the payload */
+	p = ptr;
+	while (p < end && *p != 10)
+		p++;
+	if (p >= end)
+		return;
+	p++;
+	value_begin = p;
+
+	/* Determine the end of line */
+	while (p < end && *p != 10)
+		p++;
+	if (p >= end)
+		return;
+	value_end = p;
+	p++;
+
+	len = value_end - value_begin;
+	len = min_t(int, len, sizeof(FirmwareVersion) - 1);
+	if (strip_info->firmware_version.c[0] == 0)
+		printk(KERN_INFO "%s: Radio Firmware: %.*s\n",
+		       strip_info->dev->name, len, value_begin);
+	sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin);
+
+	/* Look for the first colon */
+	while (p < end && *p != ':')
+		p++;
+	if (p >= end)
+		return;
+	/* Skip over the space */
+	p += 2;
+	len = sizeof(SerialNumber) - 1;
+	if (p + len <= end) {
+		sprintf(strip_info->serial_number.c, "%.*s", len, p);
+	} else {
+		printk(KERN_DEBUG
+		       "STRIP: radio serial number shorter (%zd) than expected (%d)\n",
+		       end - p, len);
+	}
+}
+
+/*
+ * This function parses the response to the ATS325? command,
+ * extracting the radio battery voltage.
+ */
+static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+	int len;
+
+	len = sizeof(BatteryVoltage) - 1;
+	if (ptr + len <= end) {
+		sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr);
+	} else {
+		printk(KERN_DEBUG
+		       "STRIP: radio voltage string shorter (%zd) than expected (%d)\n",
+		       end - ptr, len);
+	}
+}
+
+/*
+ * This function parses the responses to the AT~LA and ATS311 commands,
+ * which list the radio's neighbours.
+ */
+static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end)
+{
+	table->num_nodes = 0;
+	while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) {
+		MetricomNode *node = &table->node[table->num_nodes++];
+		char *dst = node->c, *limit = dst + sizeof(*node) - 1;
+		while (ptr < end && *ptr <= 32)
+			ptr++;
+		while (ptr < end && dst < limit && *ptr != 10)
+			*dst++ = *ptr++;
+		*dst++ = 0;
+		while (ptr < end && ptr[-1] != 10)
+			ptr++;
+	}
+	do_gettimeofday(&table->timestamp);
+}
+
+static int get_radio_address(struct strip *strip_info, __u8 * p)
+{
+	MetricomAddress addr;
+
+	if (string_to_radio_address(&addr, p))
+		return (1);
+
+	/* See if our radio address has changed */
+	if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) {
+		MetricomAddressString addr_string;
+		radio_address_to_string(&addr, &addr_string);
+		printk(KERN_INFO "%s: Radio address = %s\n",
+		       strip_info->dev->name, addr_string.c);
+		strip_info->true_dev_addr = addr;
+		if (!strip_info->manual_dev_addr)
+			*(MetricomAddress *) strip_info->dev->dev_addr =
+			    addr;
+		/* Give the radio a few seconds to get its head straight, then send an arp */
+		strip_info->gratuitous_arp = jiffies + 15 * HZ;
+		strip_info->arp_interval = 1 * HZ;
+	}
+	return (0);
+}
+
+static int verify_checksum(struct strip *strip_info)
+{
+	__u8 *p = strip_info->sx_buff;
+	__u8 *end = strip_info->sx_buff + strip_info->sx_count - 4;
+	u_short sum =
+	    (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) |
+	    (READHEX16(end[2]) << 4) | (READHEX16(end[3]));
+	while (p < end)
+		sum -= *p++;
+	if (sum == 0 && strip_info->firmware_level == StructuredMessages) {
+		strip_info->firmware_level = ChecksummedMessages;
+		printk(KERN_INFO "%s: Radio provides message checksums\n",
+		       strip_info->dev->name);
+	}
+	return (sum == 0);
+}
+
+static void RecvErr(char *msg, struct strip *strip_info)
+{
+	__u8 *ptr = strip_info->sx_buff;
+	__u8 *end = strip_info->sx_buff + strip_info->sx_count;
+	DumpData(msg, strip_info, ptr, end);
+	strip_info->rx_errors++;
+}
+
+static void RecvErr_Message(struct strip *strip_info, __u8 * sendername,
+			    const __u8 * msg, u_long len)
+{
+	if (has_prefix(msg, len, "001")) {	/* Not in StarMode! */
+		RecvErr("Error Msg:", strip_info);
+		printk(KERN_INFO "%s: Radio %s is not in StarMode\n",
+		       strip_info->dev->name, sendername);
+	}
+
+	else if (has_prefix(msg, len, "002")) {	/* Remap handle */
+		/* We ignore "Remap handle" messages for now */
+	}
+
+	else if (has_prefix(msg, len, "003")) {	/* Can't resolve name */
+		RecvErr("Error Msg:", strip_info);
+		printk(KERN_INFO "%s: Destination radio name is unknown\n",
+		       strip_info->dev->name);
+	}
+
+	else if (has_prefix(msg, len, "004")) {	/* Name too small or missing */
+		strip_info->watchdog_doreset = jiffies + LongTime;
+#if TICKLE_TIMERS
+		{
+			struct timeval tv;
+			do_gettimeofday(&tv);
+			printk(KERN_INFO
+			       "**** Got ERR_004 response         at %02d.%06d\n",
+			       tv.tv_sec % 100, tv.tv_usec);
+		}
+#endif
+		if (!strip_info->working) {
+			strip_info->working = TRUE;
+			printk(KERN_INFO "%s: Radio now in starmode\n",
+			       strip_info->dev->name);
+			/*
+			 * If the radio has just entered a working state, we should do our first
+			 * probe ASAP, so that we find out our radio address etc. without delay.
+			 */
+			strip_info->watchdog_doprobe = jiffies;
+		}
+		if (strip_info->firmware_level == NoStructure && sendername) {
+			strip_info->firmware_level = StructuredMessages;
+			strip_info->next_command = 0;	/* Try to enable checksums ASAP */
+			printk(KERN_INFO
+			       "%s: Radio provides structured messages\n",
+			       strip_info->dev->name);
+		}
+		if (strip_info->firmware_level >= StructuredMessages) {
+			/*
+			 * If this message has a valid checksum on the end, then the call to verify_checksum
+			 * will elevate the firmware_level to ChecksummedMessages for us. (The actual return
+			 * code from verify_checksum is ignored here.)
+			 */
+			verify_checksum(strip_info);
+			/*
+			 * If the radio has structured messages but we don't yet have all our information about it,
+			 * we should do probes without delay, until we have gathered all the information
+			 */
+			if (!GOT_ALL_RADIO_INFO(strip_info))
+				strip_info->watchdog_doprobe = jiffies;
+		}
+	}
+
+	else if (has_prefix(msg, len, "005"))	/* Bad count specification */
+		RecvErr("Error Msg:", strip_info);
+
+	else if (has_prefix(msg, len, "006"))	/* Header too big */
+		RecvErr("Error Msg:", strip_info);
+
+	else if (has_prefix(msg, len, "007")) {	/* Body too big */
+		RecvErr("Error Msg:", strip_info);
+		printk(KERN_ERR
+		       "%s: Error! Packet size too big for radio.\n",
+		       strip_info->dev->name);
+	}
+
+	else if (has_prefix(msg, len, "008")) {	/* Bad character in name */
+		RecvErr("Error Msg:", strip_info);
+		printk(KERN_ERR
+		       "%s: Radio name contains illegal character\n",
+		       strip_info->dev->name);
+	}
+
+	else if (has_prefix(msg, len, "009"))	/* No count or line terminator */
+		RecvErr("Error Msg:", strip_info);
+
+	else if (has_prefix(msg, len, "010"))	/* Invalid checksum */
+		RecvErr("Error Msg:", strip_info);
+
+	else if (has_prefix(msg, len, "011"))	/* Checksum didn't match */
+		RecvErr("Error Msg:", strip_info);
+
+	else if (has_prefix(msg, len, "012"))	/* Failed to transmit packet */
+		RecvErr("Error Msg:", strip_info);
+
+	else
+		RecvErr("Error Msg:", strip_info);
+}
+
+static void process_AT_response(struct strip *strip_info, __u8 * ptr,
+				__u8 * end)
+{
+	u_long len;
+	__u8 *p = ptr;
+	while (p < end && p[-1] != 10)
+		p++;		/* Skip past first newline character */
+	/* Now ptr points to the AT command, and p points to the text of the response. */
+	len = p - ptr;
+
+#if TICKLE_TIMERS
+	{
+		struct timeval tv;
+		do_gettimeofday(&tv);
+		printk(KERN_INFO "**** Got AT response %.7s      at %02d.%06d\n",
+		       ptr, tv.tv_sec % 100, tv.tv_usec);
+	}
+#endif
+
+	if (has_prefix(ptr, len, "ATS300?"))
+		get_radio_version(strip_info, p, end);
+	else if (has_prefix(ptr, len, "ATS305?"))
+		get_radio_address(strip_info, p);
+	else if (has_prefix(ptr, len, "ATS311?"))
+		get_radio_neighbours(&strip_info->poletops, p, end);
+	else if (has_prefix(ptr, len, "ATS319=7"))
+		verify_checksum(strip_info);
+	else if (has_prefix(ptr, len, "ATS325?"))
+		get_radio_voltage(strip_info, p, end);
+	else if (has_prefix(ptr, len, "AT~LA"))
+		get_radio_neighbours(&strip_info->portables, p, end);
+	else
+		RecvErr("Unknown AT Response:", strip_info);
+}
+
+static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+	/* Currently we don't do anything with ACKs from the radio */
+}
+
+static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+	if (ptr + 16 > end)
+		RecvErr("Bad Info Msg:", strip_info);
+}
+
+static struct net_device *get_strip_dev(struct strip *strip_info)
+{
+	/* If our hardware address is *manually set* to zero, and we know our */
+	/* real radio hardware address, try to find another strip device that has been */
+	/* manually set to that address that we can 'transfer ownership' of this packet to  */
+	if (strip_info->manual_dev_addr &&
+	    !memcmp(strip_info->dev->dev_addr, zero_address.c,
+		    sizeof(zero_address))
+	    && memcmp(&strip_info->true_dev_addr, zero_address.c,
+		      sizeof(zero_address))) {
+		struct net_device *dev;
+		read_lock_bh(&dev_base_lock);
+		for_each_netdev(&init_net, dev) {
+			if (dev->type == strip_info->dev->type &&
+			    !memcmp(dev->dev_addr,
+				    &strip_info->true_dev_addr,
+				    sizeof(MetricomAddress))) {
+				printk(KERN_INFO
+				       "%s: Transferred packet ownership to %s.\n",
+				       strip_info->dev->name, dev->name);
+				read_unlock_bh(&dev_base_lock);
+				return (dev);
+			}
+		}
+		read_unlock_bh(&dev_base_lock);
+	}
+	return (strip_info->dev);
+}
+
+/*
+ * Send one completely decapsulated datagram to the next layer.
+ */
+
+static void deliver_packet(struct strip *strip_info, STRIP_Header * header,
+			   __u16 packetlen)
+{
+	struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen);
+	if (!skb) {
+		printk(KERN_ERR "%s: memory squeeze, dropping packet.\n",
+		       strip_info->dev->name);
+		strip_info->rx_dropped++;
+	} else {
+		memcpy(skb_put(skb, sizeof(STRIP_Header)), header,
+		       sizeof(STRIP_Header));
+		memcpy(skb_put(skb, packetlen), strip_info->rx_buff,
+		       packetlen);
+		skb->dev = get_strip_dev(strip_info);
+		skb->protocol = header->protocol;
+		skb_reset_mac_header(skb);
+
+		/* Having put a fake header on the front of the sk_buff for the */
+		/* benefit of tools like tcpdump, skb_pull now 'consumes' that  */
+		/* fake header before we hand the packet up to the next layer.  */
+		skb_pull(skb, sizeof(STRIP_Header));
+
+		/* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */
+		strip_info->rx_packets++;
+		strip_info->rx_pps_count++;
+#ifdef EXT_COUNTERS
+		strip_info->rx_bytes += packetlen;
+#endif
+		netif_rx(skb);
+	}
+}
+
+static void process_IP_packet(struct strip *strip_info,
+			      STRIP_Header * header, __u8 * ptr,
+			      __u8 * end)
+{
+	__u16 packetlen;
+
+	/* Decode start of the IP packet header */
+	ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4);
+	if (!ptr) {
+		RecvErr("IP Packet too short", strip_info);
+		return;
+	}
+
+	packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3];
+
+	if (packetlen > MAX_RECV_MTU) {
+		printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n",
+		       strip_info->dev->name, packetlen);
+		strip_info->rx_dropped++;
+		return;
+	}
+
+	/*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */
+
+	/* Decode remainder of the IP packet */
+	ptr =
+	    UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4);
+	if (!ptr) {
+		RecvErr("IP Packet too short", strip_info);
+		return;
+	}
+
+	if (ptr < end) {
+		RecvErr("IP Packet too long", strip_info);
+		return;
+	}
+
+	header->protocol = htons(ETH_P_IP);
+
+	deliver_packet(strip_info, header, packetlen);
+}
+
+static void process_ARP_packet(struct strip *strip_info,
+			       STRIP_Header * header, __u8 * ptr,
+			       __u8 * end)
+{
+	__u16 packetlen;
+	struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff;
+
+	/* Decode start of the ARP packet */
+	ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8);
+	if (!ptr) {
+		RecvErr("ARP Packet too short", strip_info);
+		return;
+	}
+
+	packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2;
+
+	if (packetlen > MAX_RECV_MTU) {
+		printk(KERN_INFO
+		       "%s: Dropping oversized received ARP packet: %d bytes\n",
+		       strip_info->dev->name, packetlen);
+		strip_info->rx_dropped++;
+		return;
+	}
+
+	/*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
+	   strip_info->dev->name, packetlen,
+	   ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */
+
+	/* Decode remainder of the ARP packet */
+	ptr =
+	    UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8);
+	if (!ptr) {
+		RecvErr("ARP Packet too short", strip_info);
+		return;
+	}
+
+	if (ptr < end) {
+		RecvErr("ARP Packet too long", strip_info);
+		return;
+	}
+
+	header->protocol = htons(ETH_P_ARP);
+
+	deliver_packet(strip_info, header, packetlen);
+}
+
+/*
+ * process_text_message processes a <CR>-terminated block of data received
+ * from the radio that doesn't begin with a '*' character. All normal
+ * Starmode communication messages with the radio begin with a '*',
+ * so any text that does not indicates a serial port error, a radio that
+ * is in Hayes command mode instead of Starmode, or a radio with really
+ * old firmware that doesn't frame its Starmode responses properly.
+ */
+static void process_text_message(struct strip *strip_info)
+{
+	__u8 *msg = strip_info->sx_buff;
+	int len = strip_info->sx_count;
+
+	/* Check for anything that looks like it might be our radio name */
+	/* (This is here for backwards compatibility with old firmware)  */
+	if (len == 9 && get_radio_address(strip_info, msg) == 0)
+		return;
+
+	if (text_equal(msg, len, "OK"))
+		return;		/* Ignore 'OK' responses from prior commands */
+	if (text_equal(msg, len, "ERROR"))
+		return;		/* Ignore 'ERROR' messages */
+	if (has_prefix(msg, len, "ate0q1"))
+		return;		/* Ignore character echo back from the radio */
+
+	/* Catch other error messages */
+	/* (This is here for backwards compatibility with old firmware) */
+	if (has_prefix(msg, len, "ERR_")) {
+		RecvErr_Message(strip_info, NULL, &msg[4], len - 4);
+		return;
+	}
+
+	RecvErr("No initial *", strip_info);
+}
+
+/*
+ * process_message processes a <CR>-terminated block of data received
+ * from the radio. If the radio is not in Starmode or has old firmware,
+ * it may be a line of text in response to an AT command. Ideally, with
+ * a current radio that's properly in Starmode, all data received should
+ * be properly framed and checksummed radio message blocks, containing
+ * either a starmode packet, or a other communication from the radio
+ * firmware, like "INF_" Info messages and &COMMAND responses.
+ */
+static void process_message(struct strip *strip_info)
+{
+	STRIP_Header header = { zero_address, zero_address, 0 };
+	__u8 *ptr = strip_info->sx_buff;
+	__u8 *end = strip_info->sx_buff + strip_info->sx_count;
+	__u8 sendername[32], *sptr = sendername;
+	MetricomKey key;
+
+	/*HexDump("Receiving", strip_info, ptr, end); */
+
+	/* Check for start of address marker, and then skip over it */
+	if (*ptr == '*')
+		ptr++;
+	else {
+		process_text_message(strip_info);
+		return;
+	}
+
+	/* Copy out the return address */
+	while (ptr < end && *ptr != '*'
+	       && sptr < ARRAY_END(sendername) - 1)
+		*sptr++ = *ptr++;
+	*sptr = 0;		/* Null terminate the sender name */
+
+	/* Check for end of address marker, and skip over it */
+	if (ptr >= end || *ptr != '*') {
+		RecvErr("No second *", strip_info);
+		return;
+	}
+	ptr++;			/* Skip the second '*' */
+
+	/* If the sender name is "&COMMAND", ignore this 'packet'       */
+	/* (This is here for backwards compatibility with old firmware) */
+	if (!strcmp(sendername, "&COMMAND")) {
+		strip_info->firmware_level = NoStructure;
+		strip_info->next_command = CompatibilityCommand;
+		return;
+	}
+
+	if (ptr + 4 > end) {
+		RecvErr("No proto key", strip_info);
+		return;
+	}
+
+	/* Get the protocol key out of the buffer */
+	key.c[0] = *ptr++;
+	key.c[1] = *ptr++;
+	key.c[2] = *ptr++;
+	key.c[3] = *ptr++;
+
+	/* If we're using checksums, verify the checksum at the end of the packet */
+	if (strip_info->firmware_level >= ChecksummedMessages) {
+		end -= 4;	/* Chop the last four bytes off the packet (they're the checksum) */
+		if (ptr > end) {
+			RecvErr("Missing Checksum", strip_info);
+			return;
+		}
+		if (!verify_checksum(strip_info)) {
+			RecvErr("Bad Checksum", strip_info);
+			return;
+		}
+	}
+
+	/*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */
+
+	/*
+	 * Fill in (pseudo) source and destination addresses in the packet.
+	 * We assume that the destination address was our address (the radio does not
+	 * tell us this). If the radio supplies a source address, then we use it.
+	 */
+	header.dst_addr = strip_info->true_dev_addr;
+	string_to_radio_address(&header.src_addr, sendername);
+
+#ifdef EXT_COUNTERS
+	if (key.l == SIP0Key.l) {
+		strip_info->rx_rbytes += (end - ptr);
+		process_IP_packet(strip_info, &header, ptr, end);
+	} else if (key.l == ARP0Key.l) {
+		strip_info->rx_rbytes += (end - ptr);
+		process_ARP_packet(strip_info, &header, ptr, end);
+	} else if (key.l == ATR_Key.l) {
+		strip_info->rx_ebytes += (end - ptr);
+		process_AT_response(strip_info, ptr, end);
+	} else if (key.l == ACK_Key.l) {
+		strip_info->rx_ebytes += (end - ptr);
+		process_ACK(strip_info, ptr, end);
+	} else if (key.l == INF_Key.l) {
+		strip_info->rx_ebytes += (end - ptr);
+		process_Info(strip_info, ptr, end);
+	} else if (key.l == ERR_Key.l) {
+		strip_info->rx_ebytes += (end - ptr);
+		RecvErr_Message(strip_info, sendername, ptr, end - ptr);
+	} else
+		RecvErr("Unrecognized protocol key", strip_info);
+#else
+	if (key.l == SIP0Key.l)
+		process_IP_packet(strip_info, &header, ptr, end);
+	else if (key.l == ARP0Key.l)
+		process_ARP_packet(strip_info, &header, ptr, end);
+	else if (key.l == ATR_Key.l)
+		process_AT_response(strip_info, ptr, end);
+	else if (key.l == ACK_Key.l)
+		process_ACK(strip_info, ptr, end);
+	else if (key.l == INF_Key.l)
+		process_Info(strip_info, ptr, end);
+	else if (key.l == ERR_Key.l)
+		RecvErr_Message(strip_info, sendername, ptr, end - ptr);
+	else
+		RecvErr("Unrecognized protocol key", strip_info);
+#endif
+}
+
+#define TTYERROR(X) ((X) == TTY_BREAK   ? "Break"            : \
+                     (X) == TTY_FRAME   ? "Framing Error"    : \
+                     (X) == TTY_PARITY  ? "Parity Error"     : \
+                     (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error")
+
+/*
+ * Handle the 'receiver data ready' interrupt.
+ * This function is called by the 'tty_io' module in the kernel when
+ * a block of STRIP data has been received, which can now be decapsulated
+ * and sent on to some IP layer for further processing.
+ */
+
+static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+		  char *fp, int count)
+{
+	struct strip *strip_info = tty->disc_data;
+	const unsigned char *end = cp + count;
+
+	if (!strip_info || strip_info->magic != STRIP_MAGIC
+	    || !netif_running(strip_info->dev))
+		return;
+
+	spin_lock_bh(&strip_lock);
+#if 0
+	{
+		struct timeval tv;
+		do_gettimeofday(&tv);
+		printk(KERN_INFO
+		       "**** strip_receive_buf: %3d bytes at %02d.%06d\n",
+		       count, tv.tv_sec % 100, tv.tv_usec);
+	}
+#endif
+
+#ifdef EXT_COUNTERS
+	strip_info->rx_sbytes += count;
+#endif
+
+	/* Read the characters out of the buffer */
+	while (cp < end) {
+		if (fp && *fp)
+			printk(KERN_INFO "%s: %s on serial port\n",
+			       strip_info->dev->name, TTYERROR(*fp));
+		if (fp && *fp++ && !strip_info->discard) {	/* If there's a serial error, record it */
+			/* If we have some characters in the buffer, discard them */
+			strip_info->discard = strip_info->sx_count;
+			strip_info->rx_errors++;
+		}
+
+		/* Leading control characters (CR, NL, Tab, etc.) are ignored */
+		if (strip_info->sx_count > 0 || *cp >= ' ') {
+			if (*cp == 0x0D) {	/* If end of packet, decide what to do with it */
+				if (strip_info->sx_count > 3000)
+					printk(KERN_INFO
+					       "%s: Cut a %d byte packet (%zd bytes remaining)%s\n",
+					       strip_info->dev->name,
+					       strip_info->sx_count,
+					       end - cp - 1,
+					       strip_info->
+					       discard ? " (discarded)" :
+					       "");
+				if (strip_info->sx_count >
+				    strip_info->sx_size) {
+					strip_info->rx_over_errors++;
+					printk(KERN_INFO
+					       "%s: sx_buff overflow (%d bytes total)\n",
+					       strip_info->dev->name,
+					       strip_info->sx_count);
+				} else if (strip_info->discard)
+					printk(KERN_INFO
+					       "%s: Discarding bad packet (%d/%d)\n",
+					       strip_info->dev->name,
+					       strip_info->discard,
+					       strip_info->sx_count);
+				else
+					process_message(strip_info);
+				strip_info->discard = 0;
+				strip_info->sx_count = 0;
+			} else {
+				/* Make sure we have space in the buffer */
+				if (strip_info->sx_count <
+				    strip_info->sx_size)
+					strip_info->sx_buff[strip_info->
+							    sx_count] =
+					    *cp;
+				strip_info->sx_count++;
+			}
+		}
+		cp++;
+	}
+	spin_unlock_bh(&strip_lock);
+}
+
+
+/************************************************************************/
+/* General control routines						*/
+
+static int set_mac_address(struct strip *strip_info,
+			   MetricomAddress * addr)
+{
+	/*
+	 * We're using a manually specified address if the address is set
+	 * to anything other than all ones. Setting the address to all ones
+	 * disables manual mode and goes back to automatic address determination
+	 * (tracking the true address that the radio has).
+	 */
+	strip_info->manual_dev_addr =
+	    memcmp(addr->c, broadcast_address.c,
+		   sizeof(broadcast_address));
+	if (strip_info->manual_dev_addr)
+		*(MetricomAddress *) strip_info->dev->dev_addr = *addr;
+	else
+		*(MetricomAddress *) strip_info->dev->dev_addr =
+		    strip_info->true_dev_addr;
+	return 0;
+}
+
+static int strip_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct strip *strip_info = netdev_priv(dev);
+	struct sockaddr *sa = addr;
+	printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name);
+	set_mac_address(strip_info, (MetricomAddress *) sa->sa_data);
+	return 0;
+}
+
+static struct net_device_stats *strip_get_stats(struct net_device *dev)
+{
+	struct strip *strip_info = netdev_priv(dev);
+	static struct net_device_stats stats;
+
+	memset(&stats, 0, sizeof(struct net_device_stats));
+
+	stats.rx_packets = strip_info->rx_packets;
+	stats.tx_packets = strip_info->tx_packets;
+	stats.rx_dropped = strip_info->rx_dropped;
+	stats.tx_dropped = strip_info->tx_dropped;
+	stats.tx_errors = strip_info->tx_errors;
+	stats.rx_errors = strip_info->rx_errors;
+	stats.rx_over_errors = strip_info->rx_over_errors;
+	return (&stats);
+}
+
+
+/************************************************************************/
+/* Opening and closing							*/
+
+/*
+ * Here's the order things happen:
+ * When the user runs "slattach -p strip ..."
+ *  1. The TTY module calls strip_open;;
+ *  2. strip_open calls strip_alloc
+ *  3.                  strip_alloc calls register_netdev
+ *  4.                  register_netdev calls strip_dev_init
+ *  5. then strip_open finishes setting up the strip_info
+ *
+ * When the user runs "ifconfig st<x> up address netmask ..."
+ *  6. strip_open_low gets called
+ *
+ * When the user runs "ifconfig st<x> down"
+ *  7. strip_close_low gets called
+ *
+ * When the user kills the slattach process
+ *  8. strip_close gets called
+ *  9. strip_close calls dev_close
+ * 10. if the device is still up, then dev_close calls strip_close_low
+ * 11. strip_close calls strip_free
+ */
+
+/* Open the low-level part of the STRIP channel. Easy! */
+
+static int strip_open_low(struct net_device *dev)
+{
+	struct strip *strip_info = netdev_priv(dev);
+
+	if (strip_info->tty == NULL)
+		return (-ENODEV);
+
+	if (!allocate_buffers(strip_info, dev->mtu))
+		return (-ENOMEM);
+
+	strip_info->sx_count = 0;
+	strip_info->tx_left = 0;
+
+	strip_info->discard = 0;
+	strip_info->working = FALSE;
+	strip_info->firmware_level = NoStructure;
+	strip_info->next_command = CompatibilityCommand;
+	strip_info->user_baud = tty_get_baud_rate(strip_info->tty);
+
+	printk(KERN_INFO "%s: Initializing Radio.\n",
+	       strip_info->dev->name);
+	ResetRadio(strip_info);
+	strip_info->idle_timer.expires = jiffies + 1 * HZ;
+	add_timer(&strip_info->idle_timer);
+	netif_wake_queue(dev);
+	return (0);
+}
+
+
+/*
+ * Close the low-level part of the STRIP channel. Easy!
+ */
+
+static int strip_close_low(struct net_device *dev)
+{
+	struct strip *strip_info = netdev_priv(dev);
+
+	if (strip_info->tty == NULL)
+		return -EBUSY;
+	clear_bit(TTY_DO_WRITE_WAKEUP, &strip_info->tty->flags);
+	netif_stop_queue(dev);
+
+	/*
+	 * Free all STRIP frame buffers.
+	 */
+	kfree(strip_info->rx_buff);
+	strip_info->rx_buff = NULL;
+	kfree(strip_info->sx_buff);
+	strip_info->sx_buff = NULL;
+	kfree(strip_info->tx_buff);
+	strip_info->tx_buff = NULL;
+
+	del_timer(&strip_info->idle_timer);
+	return 0;
+}
+
+static const struct header_ops strip_header_ops = {
+	.create = strip_header,
+	.rebuild = strip_rebuild_header,
+};
+
+
+static const struct net_device_ops strip_netdev_ops = {
+	.ndo_open 	= strip_open_low,
+	.ndo_stop 	= strip_close_low,
+	.ndo_start_xmit = strip_xmit,
+	.ndo_set_mac_address = strip_set_mac_address,
+	.ndo_get_stats	= strip_get_stats,
+	.ndo_change_mtu = strip_change_mtu,
+};
+
+/*
+ * This routine is called by DDI when the
+ * (dynamically assigned) device is registered
+ */
+
+static void strip_dev_setup(struct net_device *dev)
+{
+	/*
+	 * Finish setting up the DEVICE info.
+	 */
+
+	dev->trans_start = 0;
+	dev->tx_queue_len = 30;	/* Drop after 30 frames queued */
+
+	dev->flags = 0;
+	dev->mtu = DEFAULT_STRIP_MTU;
+	dev->type = ARPHRD_METRICOM;	/* dtang */
+	dev->hard_header_len = sizeof(STRIP_Header);
+	/*
+	 *  netdev_priv(dev) Already holds a pointer to our struct strip
+	 */
+
+	*(MetricomAddress *)dev->broadcast = broadcast_address;
+	dev->dev_addr[0] = 0;
+	dev->addr_len = sizeof(MetricomAddress);
+
+	dev->header_ops = &strip_header_ops,
+	dev->netdev_ops = &strip_netdev_ops;
+}
+
+/*
+ * Free a STRIP channel.
+ */
+
+static void strip_free(struct strip *strip_info)
+{
+	spin_lock_bh(&strip_lock);
+	list_del_rcu(&strip_info->list);
+	spin_unlock_bh(&strip_lock);
+
+	strip_info->magic = 0;
+
+	free_netdev(strip_info->dev);
+}
+
+
+/*
+ * Allocate a new free STRIP channel
+ */
+static struct strip *strip_alloc(void)
+{
+	struct list_head *n;
+	struct net_device *dev;
+	struct strip *strip_info;
+
+	dev = alloc_netdev(sizeof(struct strip), "st%d",
+			   strip_dev_setup);
+
+	if (!dev)
+		return NULL;	/* If no more memory, return */
+
+
+	strip_info = netdev_priv(dev);
+	strip_info->dev = dev;
+
+	strip_info->magic = STRIP_MAGIC;
+	strip_info->tty = NULL;
+
+	strip_info->gratuitous_arp = jiffies + LongTime;
+	strip_info->arp_interval = 0;
+	init_timer(&strip_info->idle_timer);
+	strip_info->idle_timer.data = (long) dev;
+	strip_info->idle_timer.function = strip_IdleTask;
+
+
+	spin_lock_bh(&strip_lock);
+ rescan:
+	/*
+	 * Search the list to find where to put our new entry
+	 * (and in the process decide what channel number it is
+	 * going to be)
+	 */
+	list_for_each(n, &strip_list) {
+		struct strip *s = hlist_entry(n, struct strip, list);
+
+		if (s->dev->base_addr == dev->base_addr) {
+			++dev->base_addr;
+			goto rescan;
+		}
+	}
+
+	sprintf(dev->name, "st%ld", dev->base_addr);
+
+	list_add_tail_rcu(&strip_info->list, &strip_list);
+	spin_unlock_bh(&strip_lock);
+
+	return strip_info;
+}
+
+/*
+ * Open the high-level part of the STRIP channel.
+ * This function is called by the TTY module when the
+ * STRIP line discipline is called for.  Because we are
+ * sure the tty line exists, we only have to link it to
+ * a free STRIP channel...
+ */
+
+static int strip_open(struct tty_struct *tty)
+{
+	struct strip *strip_info = tty->disc_data;
+
+	/*
+	 * First make sure we're not already connected.
+	 */
+
+	if (strip_info && strip_info->magic == STRIP_MAGIC)
+		return -EEXIST;
+
+	/*
+	 * We need a write method.
+	 */
+
+	if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
+		return -EOPNOTSUPP;
+
+	/*
+	 * OK.  Find a free STRIP channel to use.
+	 */
+	if ((strip_info = strip_alloc()) == NULL)
+		return -ENFILE;
+
+	/*
+	 * Register our newly created device so it can be ifconfig'd
+	 * strip_dev_init() will be called as a side-effect
+	 */
+
+	if (register_netdev(strip_info->dev) != 0) {
+		printk(KERN_ERR "strip: register_netdev() failed.\n");
+		strip_free(strip_info);
+		return -ENFILE;
+	}
+
+	strip_info->tty = tty;
+	tty->disc_data = strip_info;
+	tty->receive_room = 65536;
+
+	tty_driver_flush_buffer(tty);
+
+	/*
+	 * Restore default settings
+	 */
+
+	strip_info->dev->type = ARPHRD_METRICOM;	/* dtang */
+
+	/*
+	 * Set tty options
+	 */
+
+	tty->termios->c_iflag |= IGNBRK | IGNPAR;	/* Ignore breaks and parity errors. */
+	tty->termios->c_cflag |= CLOCAL;	/* Ignore modem control signals. */
+	tty->termios->c_cflag &= ~HUPCL;	/* Don't close on hup */
+
+	printk(KERN_INFO "STRIP: device \"%s\" activated\n",
+	       strip_info->dev->name);
+
+	/*
+	 * Done.  We have linked the TTY line to a channel.
+	 */
+	return (strip_info->dev->base_addr);
+}
+
+/*
+ * Close down a STRIP channel.
+ * This means flushing out any pending queues, and then restoring the
+ * TTY line discipline to what it was before it got hooked to STRIP
+ * (which usually is TTY again).
+ */
+
+static void strip_close(struct tty_struct *tty)
+{
+	struct strip *strip_info = tty->disc_data;
+
+	/*
+	 * First make sure we're connected.
+	 */
+
+	if (!strip_info || strip_info->magic != STRIP_MAGIC)
+		return;
+
+	unregister_netdev(strip_info->dev);
+
+	tty->disc_data = NULL;
+	strip_info->tty = NULL;
+	printk(KERN_INFO "STRIP: device \"%s\" closed down\n",
+	       strip_info->dev->name);
+	strip_free(strip_info);
+	tty->disc_data = NULL;
+}
+
+
+/************************************************************************/
+/* Perform I/O control calls on an active STRIP channel.		*/
+
+static int strip_ioctl(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+	struct strip *strip_info = tty->disc_data;
+
+	/*
+	 * First make sure we're connected.
+	 */
+
+	if (!strip_info || strip_info->magic != STRIP_MAGIC)
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGIFNAME:
+		if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1))
+			return -EFAULT;
+		break;
+	case SIOCSIFHWADDR:
+	{
+		MetricomAddress addr;
+		//printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
+		if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress)))
+			return -EFAULT;
+		return set_mac_address(strip_info, &addr);
+	}
+	default:
+		return tty_mode_ioctl(tty, file, cmd, arg);
+		break;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_COMPAT
+static long strip_compat_ioctl(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case SIOCGIFNAME:
+	case SIOCSIFHWADDR:
+		return strip_ioctl(tty, file, cmd,
+			(unsigned long)compat_ptr(arg));
+	}
+	return -ENOIOCTLCMD;
+}
+#endif
+
+/************************************************************************/
+/* Initialization							*/
+
+static struct tty_ldisc_ops strip_ldisc = {
+	.magic = TTY_LDISC_MAGIC,
+	.name = "strip",
+	.owner = THIS_MODULE,
+	.open = strip_open,
+	.close = strip_close,
+	.ioctl = strip_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = strip_compat_ioctl,
+#endif
+	.receive_buf = strip_receive_buf,
+	.write_wakeup = strip_write_some_more,
+};
+
+/*
+ * Initialize the STRIP driver.
+ * This routine is called at boot time, to bootstrap the multi-channel
+ * STRIP driver
+ */
+
+static char signon[] __initdata =
+    KERN_INFO "STRIP: Version %s (unlimited channels)\n";
+
+static int __init strip_init_driver(void)
+{
+	int status;
+
+	printk(signon, StripVersion);
+
+	
+	/*
+	 * Fill in our line protocol discipline, and register it
+	 */
+	if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc)))
+		printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n",
+		       status);
+
+	/*
+	 * Register the status file with /proc
+	 */
+	proc_net_fops_create(&init_net, "strip", S_IFREG | S_IRUGO, &strip_seq_fops);
+
+	return status;
+}
+
+module_init(strip_init_driver);
+
+static const char signoff[] __exitdata =
+    KERN_INFO "STRIP: Module Unloaded\n";
+
+static void __exit strip_exit_driver(void)
+{
+	int i;
+	struct list_head *p,*n;
+
+	/* module ref count rules assure that all entries are unregistered */
+	list_for_each_safe(p, n, &strip_list) {
+		struct strip *s = list_entry(p, struct strip, list);
+		strip_free(s);
+	}
+
+	/* Unregister with the /proc/net file here. */
+	proc_net_remove(&init_net, "strip");
+
+	if ((i = tty_unregister_ldisc(N_STRIP)))
+		printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i);
+
+	printk(signoff);
+}
+
+module_exit(strip_exit_driver);
+
+MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>");
+MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem");
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
index 9bec95a..825bbc4 100644
--- a/drivers/staging/vt6655/Kconfig
+++ b/drivers/staging/vt6655/Kconfig
@@ -1,6 +1,8 @@
 config VT6655
    tristate "VIA Technologies VT6655 support"
-   depends on WIRELESS_EXT && PCI
+   depends on PCI
+   select WIRELESS_EXT
+   select WEXT_PRIV
    ---help---
    This is a vendor-written driver for VIA VT6655.
 
diff --git a/drivers/staging/vt6655/TODO b/drivers/staging/vt6655/TODO
index 8462cd1..cb04aaa 100644
--- a/drivers/staging/vt6655/TODO
+++ b/drivers/staging/vt6655/TODO
@@ -16,6 +16,5 @@
 - sparse fixes
 - integrate with drivers/net/wireless
 
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com>,
-Forest Bond <forest@alittletooquiet.net> and Bartlomiej Zolnierkiewicz
-<bzolnier@gmail.com>.
+Please send any patches to Greg Kroah-Hartman <greg@kroah.com>
+and Forest Bond <forest@alittletooquiet.net>.
diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig
index 3165f2c..87bcd26 100644
--- a/drivers/staging/vt6656/Kconfig
+++ b/drivers/staging/vt6656/Kconfig
@@ -1,6 +1,8 @@
 config VT6656
 	tristate "VIA Technologies VT6656 support"
-	depends on WIRELESS_EXT && USB
+	depends on USB
+	select WIRELESS_EXT
+	select WEXT_PRIV
 	---help---
 	This is a vendor-written driver for VIA VT6656.
 
diff --git a/drivers/staging/vt6656/TODO b/drivers/staging/vt6656/TODO
index 17cf50c..a318995 100644
--- a/drivers/staging/vt6656/TODO
+++ b/drivers/staging/vt6656/TODO
@@ -15,6 +15,5 @@
 - sparse fixes
 - integrate with drivers/net/wireless
 
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com>,
-Forest Bond <forest@alittletooquiet.net> and Bartlomiej Zolnierkiewicz
-<bzolnier@gmail.com>.
+Please send any patches to Greg Kroah-Hartman <greg@kroah.com>
+and Forest Bond <forest@alittletooquiet.net>.
diff --git a/drivers/staging/wavelan/Kconfig b/drivers/staging/wavelan/Kconfig
new file mode 100644
index 0000000..af65566
--- /dev/null
+++ b/drivers/staging/wavelan/Kconfig
@@ -0,0 +1,38 @@
+config WAVELAN
+	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
+	depends on ISA && WLAN
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	---help---
+	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
+	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
+	  radio frequencies 900 MHz and 2.4 GHz.
+
+	  If you want to use an ISA WaveLAN card under Linux, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>. Some more specific
+	  information is contained in
+	  <file:Documentation/networking/wavelan.txt> and in the source code
+	  <file:drivers/net/wireless/wavelan.p.h>.
+
+	  You will also need the wireless tools package available from
+	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  Please read the man pages contained therein.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called wavelan.
+
+config PCMCIA_WAVELAN
+	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
+	depends on PCMCIA && WLAN
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
+	help
+	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
+	  (PC-card) wireless Ethernet networking card to your computer.  This
+	  driver is for the non-IEEE-802.11 Wavelan cards.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called wavelan_cs.  If unsure, say N.
diff --git a/drivers/staging/wavelan/Makefile b/drivers/staging/wavelan/Makefile
new file mode 100644
index 0000000..1cde17c
--- /dev/null
+++ b/drivers/staging/wavelan/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_WAVELAN)		+= wavelan.o
+obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan_cs.o
diff --git a/drivers/staging/wavelan/TODO b/drivers/staging/wavelan/TODO
new file mode 100644
index 0000000..9bd15a2
--- /dev/null
+++ b/drivers/staging/wavelan/TODO
@@ -0,0 +1,7 @@
+TODO:
+	- step up and maintain this driver to ensure that it continues
+	  to work.  Having the hardware for this is pretty much a
+	  requirement.  If this does not happen, the will be removed in
+	  the 2.6.35 kernel release.
+
+Please send patches to Greg Kroah-Hartman <greg@kroah.com>.
diff --git a/drivers/net/wireless/i82586.h b/drivers/staging/wavelan/i82586.h
similarity index 100%
rename from drivers/net/wireless/i82586.h
rename to drivers/staging/wavelan/i82586.h
diff --git a/drivers/net/wireless/wavelan.c b/drivers/staging/wavelan/wavelan.c
similarity index 100%
rename from drivers/net/wireless/wavelan.c
rename to drivers/staging/wavelan/wavelan.c
diff --git a/drivers/net/wireless/wavelan.h b/drivers/staging/wavelan/wavelan.h
similarity index 100%
rename from drivers/net/wireless/wavelan.h
rename to drivers/staging/wavelan/wavelan.h
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/staging/wavelan/wavelan.p.h
similarity index 100%
rename from drivers/net/wireless/wavelan.p.h
rename to drivers/staging/wavelan/wavelan.p.h
diff --git a/drivers/staging/wavelan/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c
new file mode 100644
index 0000000..33918fd
--- /dev/null
+++ b/drivers/staging/wavelan/wavelan_cs.c
@@ -0,0 +1,4610 @@
+/*
+ *	Wavelan Pcmcia driver
+ *
+ *		Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ * Original copyright follow. See wavelan_cs.p.h for details.
+ *
+ * This code is derived from Anthony D. Joseph's code and all the changes here
+ * are also under the original copyright below.
+ *
+ * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and
+ * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services
+ *
+ * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added
+ * critical code in the routine to initialize the Modem Management Controller.
+ *
+ * Thanks to Alan Cox and Bruce Janson for their advice.
+ *
+ *	-- Yunzhou Li (scip4166@nus.sg)
+ *
+#ifdef WAVELAN_ROAMING	
+ * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu)
+ * based on patch by Joe Finney from Lancaster University.
+#endif
+ *
+ * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
+ * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
+ *
+ *   A non-shared memory PCMCIA ethernet driver for linux
+ *
+ * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu)
+ *
+ *
+ * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu)
+ *
+ * Apr 2 '98  made changes to bring the i82593 control/int handling in line
+ *             with offical specs...
+ *
+ ****************************************************************************
+ *   Copyright 1995
+ *   Anthony D. Joseph
+ *   Massachusetts Institute of Technology
+ *
+ *   Permission to use, copy, modify, and distribute this program
+ *   for any purpose and without fee is hereby granted, provided
+ *   that this copyright and permission notice appear on all copies
+ *   and supporting documentation, the name of M.I.T. not be used
+ *   in advertising or publicity pertaining to distribution of the
+ *   program without specific prior permission, and notice be given
+ *   in supporting documentation that copying and distribution is
+ *   by permission of M.I.T.  M.I.T. makes no representations about
+ *   the suitability of this software for any purpose.  It is pro-
+ *   vided "as is" without express or implied warranty.         
+ ****************************************************************************
+ *
+ */
+
+/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */
+#include "wavelan_cs.p.h"		/* Private header */
+
+#ifdef WAVELAN_ROAMING
+static void wl_cell_expiry(unsigned long data);
+static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp);
+static void wv_nwid_filter(unsigned char mode, net_local *lp);
+#endif  /*  WAVELAN_ROAMING  */
+
+/************************* MISC SUBROUTINES **************************/
+/*
+ * Subroutines which won't fit in one of the following category
+ * (wavelan modem or i82593)
+ */
+
+/******************* MODEM MANAGEMENT SUBROUTINES *******************/
+/*
+ * Useful subroutines to manage the modem of the wavelan
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read from card's Host Adaptor Status Register.
+ */
+static inline u_char
+hasr_read(u_long	base)
+{
+  return(inb(HASR(base)));
+} /* hasr_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write to card's Host Adapter Command Register.
+ */
+static inline void
+hacr_write(u_long	base,
+	   u_char	hacr)
+{
+  outb(hacr, HACR(base));
+} /* hacr_write */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write to card's Host Adapter Command Register. Include a delay for
+ * those times when it is needed.
+ */
+static void
+hacr_write_slow(u_long	base,
+		u_char	hacr)
+{
+  hacr_write(base, hacr);
+  /* delay might only be needed sometimes */
+  mdelay(1);
+} /* hacr_write_slow */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read the Parameter Storage Area from the WaveLAN card's memory
+ */
+static void
+psa_read(struct net_device *	dev,
+	 int		o,	/* offset in PSA */
+	 u_char *	b,	/* buffer to fill */
+	 int		n)	/* size to read */
+{
+  net_local *lp = netdev_priv(dev);
+  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
+
+  while(n-- > 0)
+    {
+      *b++ = readb(ptr);
+      /* Due to a lack of address decode pins, the WaveLAN PCMCIA card
+       * only supports reading even memory addresses. That means the
+       * increment here MUST be two.
+       * Because of that, we can't use memcpy_fromio()...
+       */
+      ptr += 2;
+    }
+} /* psa_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write the Parameter Storage Area to the WaveLAN card's memory
+ */
+static void
+psa_write(struct net_device *	dev,
+	  int		o,	/* Offset in psa */
+	  u_char *	b,	/* Buffer in memory */
+	  int		n)	/* Length of buffer */
+{
+  net_local *lp = netdev_priv(dev);
+  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
+  int		count = 0;
+  unsigned int	base = dev->base_addr;
+  /* As there seem to have no flag PSA_BUSY as in the ISA model, we are
+   * oblige to verify this address to know when the PSA is ready... */
+  volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
+    (psaoff(0, psa_comp_number) << 1);
+
+  /* Authorize writing to PSA */
+  hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
+
+  while(n-- > 0)
+    {
+      /* write to PSA */
+      writeb(*b++, ptr);
+      ptr += 2;
+
+      /* I don't have the spec, so I don't know what the correct
+       * sequence to write is. This hack seem to work for me... */
+      count = 0;
+      while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100))
+	mdelay(1);
+    }
+
+  /* Put the host interface back in standard state */
+  hacr_write(base, HACR_DEFAULT);
+} /* psa_write */
+
+#ifdef SET_PSA_CRC
+/*------------------------------------------------------------------*/
+/*
+ * Calculate the PSA CRC
+ * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
+ * NOTE: By specifying a length including the CRC position the
+ * returned value should be zero. (i.e. a correct checksum in the PSA)
+ *
+ * The Windows drivers don't use the CRC, but the AP and the PtP tool
+ * depend on it.
+ */
+static u_short
+psa_crc(unsigned char *	psa,	/* The PSA */
+	int		size)	/* Number of short for CRC */
+{
+  int		byte_cnt;	/* Loop on the PSA */
+  u_short	crc_bytes = 0;	/* Data in the PSA */
+  int		bit_cnt;	/* Loop on the bits of the short */
+
+  for(byte_cnt = 0; byte_cnt < size; byte_cnt++ )
+    {
+      crc_bytes ^= psa[byte_cnt];	/* Its an xor */
+
+      for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ )
+	{
+	  if(crc_bytes & 0x0001)
+	    crc_bytes = (crc_bytes >> 1) ^ 0xA001;
+	  else
+	    crc_bytes >>= 1 ;
+        }
+    }
+
+  return crc_bytes;
+} /* psa_crc */
+#endif	/* SET_PSA_CRC */
+
+/*------------------------------------------------------------------*/
+/*
+ * update the checksum field in the Wavelan's PSA
+ */
+static void
+update_psa_checksum(struct net_device *	dev)
+{
+#ifdef SET_PSA_CRC
+  psa_t		psa;
+  u_short	crc;
+
+  /* read the parameter storage area */
+  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+
+  /* update the checksum */
+  crc = psa_crc((unsigned char *) &psa,
+		sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1])
+		- sizeof(psa.psa_crc_status));
+
+  psa.psa_crc[0] = crc & 0xFF;
+  psa.psa_crc[1] = (crc & 0xFF00) >> 8;
+
+  /* Write it ! */
+  psa_write(dev, (char *)&psa.psa_crc - (char *)&psa,
+	    (unsigned char *)&psa.psa_crc, 2);
+
+#ifdef DEBUG_IOCTL_INFO
+  printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
+          dev->name, psa.psa_crc[0], psa.psa_crc[1]);
+
+  /* Check again (luxury !) */
+  crc = psa_crc((unsigned char *) &psa,
+		 sizeof(psa) - sizeof(psa.psa_crc_status));
+
+  if(crc != 0)
+    printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name);
+#endif /* DEBUG_IOCTL_INFO */
+#endif	/* SET_PSA_CRC */
+} /* update_psa_checksum */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write 1 byte to the MMC.
+ */
+static void
+mmc_out(u_long		base,
+	u_short		o,
+	u_char		d)
+{
+  int count = 0;
+
+  /* Wait for MMC to go idle */
+  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
+    udelay(10);
+
+  outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base));
+  outb(d, MMD(base));
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to write bytes to the Modem Management Controller.
+ * We start by the end because it is the way it should be !
+ */
+static void
+mmc_write(u_long	base,
+	  u_char	o,
+	  u_char *	b,
+	  int		n)
+{
+  o += n;
+  b += n;
+
+  while(n-- > 0 )
+    mmc_out(base, --o, *(--b));
+} /* mmc_write */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read 1 byte from the MMC.
+ * Optimised version for 1 byte, avoid using memory...
+ */
+static u_char
+mmc_in(u_long	base,
+       u_short	o)
+{
+  int count = 0;
+
+  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
+    udelay(10);
+  outb(o << 1, MMR(base));		/* Set the read address */
+
+  outb(0, MMD(base));			/* Required dummy write */
+
+  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
+    udelay(10);
+  return (u_char) (inb(MMD(base)));	/* Now do the actual read */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to read bytes from the Modem Management Controller.
+ * The implementation is complicated by a lack of address lines,
+ * which prevents decoding of the low-order bit.
+ * (code has just been moved in the above function)
+ * We start by the end because it is the way it should be !
+ */
+static void
+mmc_read(u_long		base,
+	 u_char		o,
+	 u_char *	b,
+	 int		n)
+{
+  o += n;
+  b += n;
+
+  while(n-- > 0)
+    *(--b) = mmc_in(base, --o);
+} /* mmc_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Get the type of encryption available...
+ */
+static inline int
+mmc_encr(u_long		base)	/* i/o port of the card */
+{
+  int	temp;
+
+  temp = mmc_in(base, mmroff(0, mmr_des_avail));
+  if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
+    return 0;
+  else
+    return temp;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wait for the frequency EEprom to complete a command...
+ */
+static void
+fee_wait(u_long		base,	/* i/o port of the card */
+	 int		delay,	/* Base delay to wait for */
+	 int		number)	/* Number of time to wait */
+{
+  int		count = 0;	/* Wait only a limited time */
+
+  while((count++ < number) &&
+	(mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY))
+    udelay(delay);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read bytes from the Frequency EEprom (frequency select cards).
+ */
+static void
+fee_read(u_long		base,	/* i/o port of the card */
+	 u_short	o,	/* destination offset */
+	 u_short *	b,	/* data buffer */
+	 int		n)	/* number of registers */
+{
+  b += n;		/* Position at the end of the area */
+
+  /* Write the address */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
+
+  /* Loop on all buffer */
+  while(n-- > 0)
+    {
+      /* Write the read command */
+      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ);
+
+      /* Wait until EEprom is ready (should be quick !) */
+      fee_wait(base, 10, 100);
+
+      /* Read the value */
+      *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) |
+	      mmc_in(base, mmroff(0, mmr_fee_data_l)));
+    }
+}
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Write bytes from the Frequency EEprom (frequency select cards).
+ * This is a bit complicated, because the frequency eeprom has to
+ * be unprotected and the write enabled.
+ * Jean II
+ */
+static void
+fee_write(u_long	base,	/* i/o port of the card */
+	  u_short	o,	/* destination offset */
+	  u_short *	b,	/* data buffer */
+	  int		n)	/* number of registers */
+{
+  b += n;		/* Position at the end of the area */
+
+#ifdef EEPROM_IS_PROTECTED	/* disabled */
+#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
+  /* Ask to read the protected register */
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
+
+  fee_wait(base, 10, 100);
+
+  /* Read the protected register */
+  printk("Protected 2 : %02X-%02X\n",
+	 mmc_in(base, mmroff(0, mmr_fee_data_h)),
+	 mmc_in(base, mmroff(0, mmr_fee_data_l)));
+#endif	/* DOESNT_SEEM_TO_WORK */
+
+  /* Enable protected register */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
+
+  fee_wait(base, 10, 100);
+
+  /* Unprotect area */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n);
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
+#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
+  /* Or use : */
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
+#endif	/* DOESNT_SEEM_TO_WORK */
+
+  fee_wait(base, 10, 100);
+#endif	/* EEPROM_IS_PROTECTED */
+
+  /* Write enable */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
+
+  fee_wait(base, 10, 100);
+
+  /* Write the EEprom address */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
+
+  /* Loop on all buffer */
+  while(n-- > 0)
+    {
+      /* Write the value */
+      mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
+      mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
+
+      /* Write the write command */
+      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE);
+
+      /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */
+      mdelay(10);
+      fee_wait(base, 10, 100);
+    }
+
+  /* Write disable */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
+
+  fee_wait(base, 10, 100);
+
+#ifdef EEPROM_IS_PROTECTED	/* disabled */
+  /* Reprotect EEprom */
+  mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00);
+  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
+
+  fee_wait(base, 10, 100);
+#endif	/* EEPROM_IS_PROTECTED */
+}
+
+/******************* WaveLAN Roaming routines... ********************/
+
+#ifdef WAVELAN_ROAMING	/* Conditional compile, see wavelan_cs.h */
+
+static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00};
+  
+static void wv_roam_init(struct net_device *dev)
+{
+  net_local  *lp= netdev_priv(dev);
+
+  /* Do not remove this unless you have a good reason */
+  printk(KERN_NOTICE "%s: Warning, you have enabled roaming on"
+	 " device %s !\n", dev->name, dev->name);
+  printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature"
+	 " of the Wavelan driver.\n");
+  printk(KERN_NOTICE "It may work, but may also make the driver behave in"
+	 " erratic ways or crash.\n");
+
+  lp->wavepoint_table.head=NULL;           /* Initialise WavePoint table */
+  lp->wavepoint_table.num_wavepoints=0;
+  lp->wavepoint_table.locked=0;
+  lp->curr_point=NULL;                        /* No default WavePoint */
+  lp->cell_search=0;
+  
+  lp->cell_timer.data=(long)lp;               /* Start cell expiry timer */
+  lp->cell_timer.function=wl_cell_expiry;
+  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
+  add_timer(&lp->cell_timer);
+  
+  wv_nwid_filter(NWID_PROMISC,lp) ;    /* Enter NWID promiscuous mode */
+  /* to build up a good WavePoint */
+                                           /* table... */
+  printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name);
+}
+ 
+static void wv_roam_cleanup(struct net_device *dev)
+{
+  wavepoint_history *ptr,*old_ptr;
+  net_local *lp= netdev_priv(dev);
+  
+  printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name);
+  
+  /* Fixme : maybe we should check that the timer exist before deleting it */
+  del_timer(&lp->cell_timer);          /* Remove cell expiry timer       */
+  ptr=lp->wavepoint_table.head;        /* Clear device's WavePoint table */
+  while(ptr!=NULL)
+    {
+      old_ptr=ptr;
+      ptr=ptr->next;	
+      wl_del_wavepoint(old_ptr,lp);	
+    }
+}
+
+/* Enable/Disable NWID promiscuous mode on a given device */
+static void wv_nwid_filter(unsigned char mode, net_local *lp)
+{
+  mm_t                  m;
+  unsigned long         flags;
+  
+#ifdef WAVELAN_ROAMING_DEBUG
+  printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name);
+#endif
+  
+  /* Disable interrupts & save flags */
+  spin_lock_irqsave(&lp->spinlock, flags);
+  
+  m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
+  mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
+  
+  if(mode==NWID_PROMISC)
+    lp->cell_search=1;
+  else
+    lp->cell_search=0;
+
+  /* ReEnable interrupts & restore flags */
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+}
+
+/* Find a record in the WavePoint table matching a given NWID */
+static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp)
+{
+  wavepoint_history	*ptr=lp->wavepoint_table.head;
+  
+  while(ptr!=NULL){
+    if(ptr->nwid==nwid)
+      return ptr;	
+    ptr=ptr->next;
+  }
+  return NULL;
+}
+
+/* Create a new wavepoint table entry */
+static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp)
+{
+  wavepoint_history *new_wavepoint;
+
+#ifdef WAVELAN_ROAMING_DEBUG	
+  printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid);
+#endif
+  
+  if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
+    return NULL;
+  
+  new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
+  if(new_wavepoint==NULL)
+    return NULL;
+  
+  new_wavepoint->nwid=nwid;                       /* New WavePoints NWID */
+  new_wavepoint->average_fast=0;                    /* Running Averages..*/
+  new_wavepoint->average_slow=0;
+  new_wavepoint->qualptr=0;                       /* Start of ringbuffer */
+  new_wavepoint->last_seq=seq-1;                /* Last sequence no.seen */
+  memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */
+  
+  new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */
+  new_wavepoint->prev=NULL;
+  
+  if(lp->wavepoint_table.head!=NULL)
+    lp->wavepoint_table.head->prev=new_wavepoint;
+  
+  lp->wavepoint_table.head=new_wavepoint;
+  
+  lp->wavepoint_table.num_wavepoints++;     /* no. of visible wavepoints */
+  
+  return new_wavepoint;
+}
+
+/* Remove a wavepoint entry from WavePoint table */
+static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp)
+{
+  if(wavepoint==NULL)
+    return;
+  
+  if(lp->curr_point==wavepoint)
+    lp->curr_point=NULL;
+  
+  if(wavepoint->prev!=NULL)
+    wavepoint->prev->next=wavepoint->next;
+  
+  if(wavepoint->next!=NULL)
+    wavepoint->next->prev=wavepoint->prev;
+  
+  if(lp->wavepoint_table.head==wavepoint)
+    lp->wavepoint_table.head=wavepoint->next;
+  
+  lp->wavepoint_table.num_wavepoints--;
+  kfree(wavepoint);
+}
+
+/* Timer callback function - checks WavePoint table for stale entries */ 
+static void wl_cell_expiry(unsigned long data)
+{
+  net_local *lp=(net_local *)data;
+  wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point;
+  
+#if WAVELAN_ROAMING_DEBUG > 1
+  printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name);
+#endif
+  
+  if(lp->wavepoint_table.locked)
+    {
+#if WAVELAN_ROAMING_DEBUG > 1
+      printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n");
+#endif
+      
+      lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */
+      add_timer(&lp->cell_timer);
+      return;
+    }
+  
+  while(wavepoint!=NULL)
+    {
+      if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT))
+	{
+#ifdef WAVELAN_ROAMING_DEBUG
+	  printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid);
+#endif
+	  
+	  old_point=wavepoint;
+	  wavepoint=wavepoint->next;
+	  wl_del_wavepoint(old_point,lp);
+	}
+      else
+	wavepoint=wavepoint->next;
+    }
+  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
+  add_timer(&lp->cell_timer);
+}
+
+/* Update SNR history of a wavepoint */
+static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq)	
+{
+  int i=0,num_missed=0,ptr=0;
+  int average_fast=0,average_slow=0;
+  
+  num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed
+							    any beacons? */
+  if(num_missed)
+    for(i=0;i<num_missed;i++)
+      {
+	wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */
+	wavepoint->qualptr %=WAVEPOINT_HISTORY;    /* in the ringbuffer. */
+      }
+  wavepoint->last_seen=jiffies;                 /* Add beacon to history */
+  wavepoint->last_seq=seq;	
+  wavepoint->sigqual[wavepoint->qualptr++]=sigqual;          
+  wavepoint->qualptr %=WAVEPOINT_HISTORY;
+  ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY;
+  
+  for(i=0;i<WAVEPOINT_FAST_HISTORY;i++)       /* Update running averages */
+    {
+      average_fast+=wavepoint->sigqual[ptr++];
+      ptr %=WAVEPOINT_HISTORY;
+    }
+  
+  average_slow=average_fast;
+  for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++)
+    {
+      average_slow+=wavepoint->sigqual[ptr++];
+      ptr %=WAVEPOINT_HISTORY;
+    }
+  
+  wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY;
+  wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY;	
+}
+
+/* Perform a handover to a new WavePoint */
+static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
+{
+  unsigned int		base = lp->dev->base_addr;
+  mm_t                  m;
+  unsigned long         flags;
+
+  if(wavepoint==lp->curr_point)          /* Sanity check... */
+    {
+      wv_nwid_filter(!NWID_PROMISC,lp);
+      return;
+    }
+  
+#ifdef WAVELAN_ROAMING_DEBUG
+  printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name);
+#endif
+ 	
+  /* Disable interrupts & save flags */
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
+  m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
+  
+  mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
+  
+  /* ReEnable interrupts & restore flags */
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+  wv_nwid_filter(!NWID_PROMISC,lp);
+  lp->curr_point=wavepoint;
+}
+
+/* Called when a WavePoint beacon is received */
+static void wl_roam_gather(struct net_device *  dev,
+			   u_char *  hdr,   /* Beacon header */
+			   u_char *  stats) /* SNR, Signal quality
+						      of packet */
+{
+  wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
+  unsigned short nwid=ntohs(beacon->nwid);  
+  unsigned short sigqual=stats[2] & MMR_SGNL_QUAL;   /* SNR of beacon */
+  wavepoint_history *wavepoint=NULL;                /* WavePoint table entry */
+  net_local *lp = netdev_priv(dev);              /* Device info */
+
+#ifdef I_NEED_THIS_FEATURE
+  /* Some people don't need this, some other may need it */
+  nwid=nwid^ntohs(beacon->domain_id);
+#endif
+
+#if WAVELAN_ROAMING_DEBUG > 1
+  printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
+  printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
+#endif
+  
+  lp->wavepoint_table.locked=1;                            /* <Mutex> */
+  
+  wavepoint=wl_roam_check(nwid,lp);            /* Find WavePoint table entry */
+  if(wavepoint==NULL)                    /* If no entry, Create a new one... */
+    {
+      wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp);
+      if(wavepoint==NULL)
+	goto out;
+    }
+  if(lp->curr_point==NULL)             /* If this is the only WavePoint, */
+    wv_roam_handover(wavepoint, lp);	         /* Jump on it! */
+  
+  wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history
+							 stats. */
+  
+  if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */
+    if(!lp->cell_search)                  /* WavePoint is getting faint, */
+      wv_nwid_filter(NWID_PROMISC,lp);    /* start looking for a new one */
+  
+  if(wavepoint->average_slow > 
+     lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA)
+    wv_roam_handover(wavepoint, lp);   /* Handover to a better WavePoint */
+  
+  if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */
+    if(lp->cell_search)  /* getting better, drop out of cell search mode */
+      wv_nwid_filter(!NWID_PROMISC,lp);
+  
+out:
+  lp->wavepoint_table.locked=0;                        /* </MUTEX>   :-) */
+}
+
+/* Test this MAC frame a WavePoint beacon */
+static inline int WAVELAN_BEACON(unsigned char *data)
+{
+  wavepoint_beacon *beacon= (wavepoint_beacon *)data;
+  static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
+  
+  if(memcmp(beacon,&beacon_template,9)==0)
+    return 1;
+  else
+    return 0;
+}
+#endif	/* WAVELAN_ROAMING */
+
+/************************ I82593 SUBROUTINES *************************/
+/*
+ * Useful subroutines to manage the Ethernet controller
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to synchronously send a command to the i82593 chip. 
+ * Should be called with interrupts disabled.
+ * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
+ *  wv_82593_config() & wv_diag())
+ */
+static int
+wv_82593_cmd(struct net_device *	dev,
+	     char *	str,
+	     int	cmd,
+	     int	result)
+{
+  unsigned int	base = dev->base_addr;
+  int		status;
+  int		wait_completed;
+  long		spin;
+
+  /* Spin until the chip finishes executing its current command (if any) */
+  spin = 1000;
+  do
+    {
+      /* Time calibration of the loop */
+      udelay(10);
+
+      /* Read the interrupt register */
+      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+      status = inb(LCSR(base));
+    }
+  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
+
+  /* If the interrupt hasn't been posted */
+  if (spin < 0) {
+#ifdef DEBUG_INTERRUPT_ERROR
+      printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
+	     str, status);
+#endif
+      return(FALSE);
+    }
+
+  /* Issue the command to the controller */
+  outb(cmd, LCCR(base));
+
+  /* If we don't have to check the result of the command
+   * Note : this mean that the irq handler will deal with that */
+  if(result == SR0_NO_RESULT)
+    return(TRUE);
+
+  /* We are waiting for command completion */
+  wait_completed = TRUE;
+
+  /* Busy wait while the LAN controller executes the command. */
+  spin = 1000;
+  do
+    {
+      /* Time calibration of the loop */
+      udelay(10);
+
+      /* Read the interrupt register */
+      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
+      status = inb(LCSR(base));
+
+      /* Check if there was an interrupt posted */
+      if((status & SR0_INTERRUPT))
+	{
+	  /* Acknowledge the interrupt */
+	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
+
+	  /* Check if interrupt is a command completion */
+	  if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
+	     ((status & SR0_BOTH_RX_TX) != 0x0) &&
+	     !(status & SR0_RECEPTION))
+	    {
+	      /* Signal command completion */
+	      wait_completed = FALSE;
+	    }
+	  else
+	    {
+	      /* Note : Rx interrupts will be handled later, because we can
+	       * handle multiple Rx packets at once */
+#ifdef DEBUG_INTERRUPT_INFO
+	      printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
+#endif
+	    }
+	}
+    }
+  while(wait_completed && (spin-- > 0));
+
+  /* If the interrupt hasn't be posted */
+  if(wait_completed)
+    {
+#ifdef DEBUG_INTERRUPT_ERROR
+      printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
+	     str, status);
+#endif
+      return(FALSE);
+    }
+
+  /* Check the return code returned by the card (see above) against
+   * the expected return code provided by the caller */
+  if((status & SR0_EVENT_MASK) != result)
+    {
+#ifdef DEBUG_INTERRUPT_ERROR
+      printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
+	     str, status);
+#endif
+      return(FALSE);
+    }
+
+  return(TRUE);
+} /* wv_82593_cmd */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does a 593 op-code number 7, and obtains the diagnose
+ * status for the WaveLAN.
+ */
+static inline int
+wv_diag(struct net_device *	dev)
+{
+  return(wv_82593_cmd(dev, "wv_diag(): diagnose",
+		      OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED));
+} /* wv_diag */
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to read len bytes from the i82593's ring buffer, starting at
+ * chip address addr. The results read from the chip are stored in buf.
+ * The return value is the address to use for next the call.
+ */
+static int
+read_ringbuf(struct net_device *	dev,
+	     int	addr,
+	     char *	buf,
+	     int	len)
+{
+  unsigned int	base = dev->base_addr;
+  int		ring_ptr = addr;
+  int		chunk_len;
+  char *	buf_ptr = buf;
+
+  /* Get all the buffer */
+  while(len > 0)
+    {
+      /* Position the Program I/O Register at the ring buffer pointer */
+      outb(ring_ptr & 0xff, PIORL(base));
+      outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base));
+
+      /* First, determine how much we can read without wrapping around the
+	 ring buffer */
+      if((addr + len) < (RX_BASE + RX_SIZE))
+	chunk_len = len;
+      else
+	chunk_len = RX_BASE + RX_SIZE - addr;
+      insb(PIOP(base), buf_ptr, chunk_len);
+      buf_ptr += chunk_len;
+      len -= chunk_len;
+      ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE;
+    }
+  return(ring_ptr);
+} /* read_ringbuf */
+
+/*------------------------------------------------------------------*/
+/*
+ * Reconfigure the i82593, or at least ask for it...
+ * Because wv_82593_config use the transmission buffer, we must do it
+ * when we are sure that there is no transmission, so we do it now
+ * or in wavelan_packet_xmit() (I can't find any better place,
+ * wavelan_interrupt is not an option...), so you may experience
+ * some delay sometime...
+ */
+static void
+wv_82593_reconfig(struct net_device *	dev)
+{
+  net_local *		lp = netdev_priv(dev);
+  struct pcmcia_device *		link = lp->link;
+  unsigned long		flags;
+
+  /* Arm the flag, will be cleard in wv_82593_config() */
+  lp->reconfig_82593 = TRUE;
+
+  /* Check if we can do it now ! */
+  if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
+    {
+      spin_lock_irqsave(&lp->spinlock, flags);	/* Disable interrupts */
+      wv_82593_config(dev);
+      spin_unlock_irqrestore(&lp->spinlock, flags);	/* Re-enable interrupts */
+    }
+  else
+    {
+#ifdef DEBUG_IOCTL_INFO
+      printk(KERN_DEBUG
+	     "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
+	     dev->name, dev->state, link->open);
+#endif
+    }
+}
+
+/********************* DEBUG & INFO SUBROUTINES *********************/
+/*
+ * This routines are used in the code to show debug informations.
+ * Most of the time, it dump the content of hardware structures...
+ */
+
+#ifdef DEBUG_PSA_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted contents of the Parameter Storage Area.
+ */
+static void
+wv_psa_show(psa_t *	p)
+{
+  printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
+  printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
+	 p->psa_io_base_addr_1,
+	 p->psa_io_base_addr_2,
+	 p->psa_io_base_addr_3,
+	 p->psa_io_base_addr_4);
+  printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
+	 p->psa_rem_boot_addr_1,
+	 p->psa_rem_boot_addr_2,
+	 p->psa_rem_boot_addr_3);
+  printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
+  printk("psa_int_req_no: %d\n", p->psa_int_req_no);
+#ifdef DEBUG_SHOW_UNUSED
+  printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0);
+#endif	/* DEBUG_SHOW_UNUSED */
+  printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr);
+  printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr);
+  printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
+  printk("psa_comp_number: %d, ", p->psa_comp_number);
+  printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
+  printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
+	 p->psa_feature_select);
+  printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
+  printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
+  printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
+  printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]);
+  printk("psa_nwid_select: %d\n", p->psa_nwid_select);
+  printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select);
+  printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+	 p->psa_encryption_key[0],
+	 p->psa_encryption_key[1],
+	 p->psa_encryption_key[2],
+	 p->psa_encryption_key[3],
+	 p->psa_encryption_key[4],
+	 p->psa_encryption_key[5],
+	 p->psa_encryption_key[6],
+	 p->psa_encryption_key[7]);
+  printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
+  printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
+	 p->psa_call_code[0]);
+  printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+	 p->psa_call_code[0],
+	 p->psa_call_code[1],
+	 p->psa_call_code[2],
+	 p->psa_call_code[3],
+	 p->psa_call_code[4],
+	 p->psa_call_code[5],
+	 p->psa_call_code[6],
+	 p->psa_call_code[7]);
+#ifdef DEBUG_SHOW_UNUSED
+  printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
+	 p->psa_reserved[0],
+	 p->psa_reserved[1]);
+#endif	/* DEBUG_SHOW_UNUSED */
+  printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
+  printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
+  printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
+} /* wv_psa_show */
+#endif	/* DEBUG_PSA_SHOW */
+
+#ifdef DEBUG_MMC_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the Modem Management Controller.
+ * This function need to be completed...
+ */
+static void
+wv_mmc_show(struct net_device *	dev)
+{
+  unsigned int	base = dev->base_addr;
+  net_local *	lp = netdev_priv(dev);
+  mmr_t		m;
+
+  /* Basic check */
+  if(hasr_read(base) & HASR_NO_CLK)
+    {
+      printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n",
+	     dev->name);
+      return;
+    }
+
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  /* Read the mmc */
+  mmc_out(base, mmwoff(0, mmw_freeze), 1);
+  mmc_read(base, 0, (u_char *)&m, sizeof(m));
+  mmc_out(base, mmwoff(0, mmw_freeze), 0);
+
+  /* Don't forget to update statistics */
+  lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
+
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+  printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
+#ifdef DEBUG_SHOW_UNUSED
+  printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+	 m.mmr_unused0[0],
+	 m.mmr_unused0[1],
+	 m.mmr_unused0[2],
+	 m.mmr_unused0[3],
+	 m.mmr_unused0[4],
+	 m.mmr_unused0[5],
+	 m.mmr_unused0[6],
+	 m.mmr_unused0[7]);
+#endif	/* DEBUG_SHOW_UNUSED */
+  printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
+	 m.mmr_des_avail, m.mmr_des_status);
+#ifdef DEBUG_SHOW_UNUSED
+  printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
+	 m.mmr_unused1[0],
+	 m.mmr_unused1[1],
+	 m.mmr_unused1[2],
+	 m.mmr_unused1[3],
+	 m.mmr_unused1[4]);
+#endif	/* DEBUG_SHOW_UNUSED */
+  printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
+	 m.mmr_dce_status,
+	 (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"",
+	 (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
+	 "loop test indicated," : "",
+	 (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "",
+	 (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
+	 "jabber timer expired," : "");
+  printk(KERN_DEBUG "Dsp ID: %02X\n",
+	 m.mmr_dsp_id);
+#ifdef DEBUG_SHOW_UNUSED
+  printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
+	 m.mmr_unused2[0],
+	 m.mmr_unused2[1]);
+#endif	/* DEBUG_SHOW_UNUSED */
+  printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
+	 (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
+	 (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
+  printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
+	 m.mmr_thr_pre_set & MMR_THR_PRE_SET,
+	 (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below");
+  printk(KERN_DEBUG "signal_lvl: %d [%s], ",
+	 m.mmr_signal_lvl & MMR_SIGNAL_LVL,
+	 (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg");
+  printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL,
+	 (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update");
+  printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
+	 (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0");
+#ifdef DEBUG_SHOW_UNUSED
+  printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
+#endif	/* DEBUG_SHOW_UNUSED */
+} /* wv_mmc_show */
+#endif	/* DEBUG_MMC_SHOW */
+
+#ifdef DEBUG_I82593_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the i82593's receive unit.
+ */
+static void
+wv_ru_show(struct net_device *	dev)
+{
+  net_local *lp = netdev_priv(dev);
+
+  printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n");
+  printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop);
+  /*
+   * Not implemented yet...
+   */
+  printk("\n");
+} /* wv_ru_show */
+#endif	/* DEBUG_I82593_SHOW */
+
+#ifdef DEBUG_DEVICE_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the WaveLAN PCMCIA device driver.
+ */
+static void
+wv_dev_show(struct net_device *	dev)
+{
+  printk(KERN_DEBUG "dev:");
+  printk(" state=%lX,", dev->state);
+  printk(" trans_start=%ld,", dev->trans_start);
+  printk(" flags=0x%x,", dev->flags);
+  printk("\n");
+} /* wv_dev_show */
+
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the WaveLAN PCMCIA device driver's
+ * private information.
+ */
+static void
+wv_local_show(struct net_device *	dev)
+{
+  net_local *lp = netdev_priv(dev);
+
+  printk(KERN_DEBUG "local:");
+  /*
+   * Not implemented yet...
+   */
+  printk("\n");
+} /* wv_local_show */
+#endif	/* DEBUG_DEVICE_SHOW */
+
+#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
+/*------------------------------------------------------------------*/
+/*
+ * Dump packet header (and content if necessary) on the screen
+ */
+static void
+wv_packet_info(u_char *		p,		/* Packet to dump */
+	       int		length,		/* Length of the packet */
+	       char *		msg1,		/* Name of the device */
+	       char *		msg2)		/* Name of the function */
+{
+  int		i;
+  int		maxi;
+
+  printk(KERN_DEBUG "%s: %s(): dest %pM, length %d\n",
+	 msg1, msg2, p, length);
+  printk(KERN_DEBUG "%s: %s(): src %pM, type 0x%02X%02X\n",
+	 msg1, msg2, &p[6], p[12], p[13]);
+
+#ifdef DEBUG_PACKET_DUMP
+
+  printk(KERN_DEBUG "data=\"");
+
+  if((maxi = length) > DEBUG_PACKET_DUMP)
+    maxi = DEBUG_PACKET_DUMP;
+  for(i = 14; i < maxi; i++)
+    if(p[i] >= ' ' && p[i] <= '~')
+      printk(" %c", p[i]);
+    else
+      printk("%02X", p[i]);
+  if(maxi < length)
+    printk("..");
+  printk("\"\n");
+  printk(KERN_DEBUG "\n");
+#endif	/* DEBUG_PACKET_DUMP */
+}
+#endif	/* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
+
+/*------------------------------------------------------------------*/
+/*
+ * This is the information which is displayed by the driver at startup
+ * There  is a lot of flag to configure it at your will...
+ */
+static void
+wv_init_info(struct net_device *	dev)
+{
+  unsigned int	base = dev->base_addr;
+  psa_t		psa;
+
+  /* Read the parameter storage area */
+  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+
+#ifdef DEBUG_PSA_SHOW
+  wv_psa_show(&psa);
+#endif
+#ifdef DEBUG_MMC_SHOW
+  wv_mmc_show(dev);
+#endif
+#ifdef DEBUG_I82593_SHOW
+  wv_ru_show(dev);
+#endif
+
+#ifdef DEBUG_BASIC_SHOW
+  /* Now, let's go for the basic stuff */
+  printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, hw_addr %pM",
+	 dev->name, base, dev->irq, dev->dev_addr);
+
+  /* Print current network id */
+  if(psa.psa_nwid_select)
+    printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]);
+  else
+    printk(", nwid off");
+
+  /* If 2.00 card */
+  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+    {
+      unsigned short	freq;
+
+      /* Ask the EEprom to read the frequency from the first area */
+      fee_read(base, 0x00 /* 1st area - frequency... */,
+	       &freq, 1);
+
+      /* Print frequency */
+      printk(", 2.00, %ld", (freq >> 6) + 2400L);
+
+      /* Hack !!! */
+      if(freq & 0x20)
+	printk(".5");
+    }
+  else
+    {
+      printk(", PCMCIA, ");
+      switch (psa.psa_subband)
+	{
+	case PSA_SUBBAND_915:
+	  printk("915");
+	  break;
+	case PSA_SUBBAND_2425:
+	  printk("2425");
+	  break;
+	case PSA_SUBBAND_2460:
+	  printk("2460");
+	  break;
+	case PSA_SUBBAND_2484:
+	  printk("2484");
+	  break;
+	case PSA_SUBBAND_2430_5:
+	  printk("2430.5");
+	  break;
+	default:
+	  printk("unknown");
+	}
+    }
+
+  printk(" MHz\n");
+#endif	/* DEBUG_BASIC_SHOW */
+
+#ifdef DEBUG_VERSION_SHOW
+  /* Print version information */
+  printk(KERN_NOTICE "%s", version);
+#endif
+} /* wv_init_info */
+
+/********************* IOCTL, STATS & RECONFIG *********************/
+/*
+ * We found here routines that are called by Linux on differents
+ * occasions after the configuration and not for transmitting data
+ * These may be called when the user use ifconfig, /proc/net/dev
+ * or wireless extensions
+ */
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1	Promiscuous mode, receive all packets
+ * num_addrs == 0	Normal mode, clear multicast list
+ * num_addrs > 0	Multicast mode, receive normal and MC packets,
+ *			and do best-effort filtering.
+ */
+
+static void
+wavelan_set_multicast_list(struct net_device *	dev)
+{
+  net_local *	lp = netdev_priv(dev);
+
+#ifdef DEBUG_IOCTL_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name);
+#endif
+
+#ifdef DEBUG_IOCTL_INFO
+  printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
+	 dev->name, dev->flags, dev->mc_count);
+#endif
+
+  if(dev->flags & IFF_PROMISC)
+    {
+      /*
+       * Enable promiscuous mode: receive all packets.
+       */
+      if(!lp->promiscuous)
+	{
+	  lp->promiscuous = 1;
+	  lp->allmulticast = 0;
+	  lp->mc_count = 0;
+
+	  wv_82593_reconfig(dev);
+	}
+    }
+  else
+    /* If all multicast addresses
+     * or too much multicast addresses for the hardware filter */
+    if((dev->flags & IFF_ALLMULTI) ||
+       (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
+      {
+	/*
+	 * Disable promiscuous mode, but active the all multicast mode
+	 */
+	if(!lp->allmulticast)
+	  {
+	    lp->promiscuous = 0;
+	    lp->allmulticast = 1;
+	    lp->mc_count = 0;
+
+	    wv_82593_reconfig(dev);
+	  }
+      }
+    else
+      /* If there is some multicast addresses to send */
+      if(dev->mc_list != (struct dev_mc_list *) NULL)
+	{
+	  /*
+	   * Disable promiscuous mode, but receive all packets
+	   * in multicast list
+	   */
+#ifdef MULTICAST_AVOID
+	  if(lp->promiscuous || lp->allmulticast ||
+	     (dev->mc_count != lp->mc_count))
+#endif
+	    {
+	      lp->promiscuous = 0;
+	      lp->allmulticast = 0;
+	      lp->mc_count = dev->mc_count;
+
+	      wv_82593_reconfig(dev);
+	    }
+	}
+      else
+	{
+	  /*
+	   * Switch to normal mode: disable promiscuous mode and 
+	   * clear the multicast list.
+	   */
+	  if(lp->promiscuous || lp->mc_count == 0)
+	    {
+	      lp->promiscuous = 0;
+	      lp->allmulticast = 0;
+	      lp->mc_count = 0;
+
+	      wv_82593_reconfig(dev);
+	    }
+	}
+#ifdef DEBUG_IOCTL_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This function doesn't exist...
+ * (Note : it was a nice way to test the reconfigure stuff...)
+ */
+#ifdef SET_MAC_ADDRESS
+static int
+wavelan_set_mac_address(struct net_device *	dev,
+			void *		addr)
+{
+  struct sockaddr *	mac = addr;
+
+  /* Copy the address */
+  memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
+
+  /* Reconfig the beast */
+  wv_82593_reconfig(dev);
+
+  return 0;
+}
+#endif	/* SET_MAC_ADDRESS */
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Frequency setting (for hardware able of it)
+ * It's a bit complicated and you don't really want to look into it...
+ */
+static int
+wv_set_frequency(u_long		base,	/* i/o port of the card */
+		 iw_freq *	frequency)
+{
+  const int	BAND_NUM = 10;	/* Number of bands */
+  long		freq = 0L;	/* offset to 2.4 GHz in .5 MHz */
+#ifdef DEBUG_IOCTL_INFO
+  int		i;
+#endif
+
+  /* Setting by frequency */
+  /* Theoritically, you may set any frequency between
+   * the two limits with a 0.5 MHz precision. In practice,
+   * I don't want you to have trouble with local
+   * regulations... */
+  if((frequency->e == 1) &&
+     (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8))
+    {
+      freq = ((frequency->m / 10000) - 24000L) / 5;
+    }
+
+  /* Setting by channel (same as wfreqsel) */
+  /* Warning : each channel is 22MHz wide, so some of the channels
+   * will interfere... */
+  if((frequency->e == 0) &&
+     (frequency->m >= 0) && (frequency->m < BAND_NUM))
+    {
+      /* Get frequency offset. */
+      freq = channel_bands[frequency->m] >> 1;
+    }
+
+  /* Verify if the frequency is allowed */
+  if(freq != 0L)
+    {
+      u_short	table[10];	/* Authorized frequency table */
+
+      /* Read the frequency table */
+      fee_read(base, 0x71 /* frequency table */,
+	       table, 10);
+
+#ifdef DEBUG_IOCTL_INFO
+      printk(KERN_DEBUG "Frequency table :");
+      for(i = 0; i < 10; i++)
+	{
+	  printk(" %04X",
+		 table[i]);
+	}
+      printk("\n");
+#endif
+
+      /* Look in the table if the frequency is allowed */
+      if(!(table[9 - ((freq - 24) / 16)] &
+	   (1 << ((freq - 24) % 16))))
+	return -EINVAL;		/* not allowed */
+    }
+  else
+    return -EINVAL;
+
+  /* If we get a usable frequency */
+  if(freq != 0L)
+    {
+      unsigned short	area[16];
+      unsigned short	dac[2];
+      unsigned short	area_verify[16];
+      unsigned short	dac_verify[2];
+      /* Corresponding gain (in the power adjust value table)
+       * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8
+       * & WCIN062D.DOC, page 6.2.9 */
+      unsigned short	power_limit[] = { 40, 80, 120, 160, 0 };
+      int		power_band = 0;		/* Selected band */
+      unsigned short	power_adjust;		/* Correct value */
+
+      /* Search for the gain */
+      power_band = 0;
+      while((freq > power_limit[power_band]) &&
+	    (power_limit[++power_band] != 0))
+	;
+
+      /* Read the first area */
+      fee_read(base, 0x00,
+	       area, 16);
+
+      /* Read the DAC */
+      fee_read(base, 0x60,
+	       dac, 2);
+
+      /* Read the new power adjust value */
+      fee_read(base, 0x6B - (power_band >> 1),
+	       &power_adjust, 1);
+      if(power_band & 0x1)
+	power_adjust >>= 8;
+      else
+	power_adjust &= 0xFF;
+
+#ifdef DEBUG_IOCTL_INFO
+      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
+      for(i = 0; i < 16; i++)
+	{
+	  printk(" %04X",
+		 area[i]);
+	}
+      printk("\n");
+
+      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
+	     dac[0], dac[1]);
+#endif
+
+      /* Frequency offset (for info only...) */
+      area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
+
+      /* Receiver Principle main divider coefficient */
+      area[3] = (freq >> 1) + 2400L - 352L;
+      area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
+
+      /* Transmitter Main divider coefficient */
+      area[13] = (freq >> 1) + 2400L;
+      area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
+
+      /* Others part of the area are flags, bit streams or unused... */
+
+      /* Set the value in the DAC */
+      dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
+      dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
+
+      /* Write the first area */
+      fee_write(base, 0x00,
+		area, 16);
+
+      /* Write the DAC */
+      fee_write(base, 0x60,
+		dac, 2);
+
+      /* We now should verify here that the EEprom writing was ok */
+
+      /* ReRead the first area */
+      fee_read(base, 0x00,
+	       area_verify, 16);
+
+      /* ReRead the DAC */
+      fee_read(base, 0x60,
+	       dac_verify, 2);
+
+      /* Compare */
+      if(memcmp(area, area_verify, 16 * 2) ||
+	 memcmp(dac, dac_verify, 2 * 2))
+	{
+#ifdef DEBUG_IOCTL_ERROR
+	  printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
+#endif
+	  return -EOPNOTSUPP;
+	}
+
+      /* We must download the frequency parameters to the
+       * synthetisers (from the EEprom - area 1)
+       * Note : as the EEprom is auto decremented, we set the end
+       * if the area... */
+      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F);
+      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
+	      MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
+
+      /* Wait until the download is finished */
+      fee_wait(base, 100, 100);
+
+      /* We must now download the power adjust value (gain) to
+       * the synthetisers (from the EEprom - area 7 - DAC) */
+      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61);
+      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
+	      MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
+
+      /* Wait until the download is finished */
+      fee_wait(base, 100, 100);
+
+#ifdef DEBUG_IOCTL_INFO
+      /* Verification of what we have done... */
+
+      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
+      for(i = 0; i < 16; i++)
+	{
+	  printk(" %04X",
+		 area_verify[i]);
+	}
+      printk("\n");
+
+      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
+	     dac_verify[0], dac_verify[1]);
+#endif
+
+      return 0;
+    }
+  else
+    return -EINVAL;		/* Bah, never get there... */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Give the list of available frequencies
+ */
+static int
+wv_frequency_list(u_long	base,	/* i/o port of the card */
+		  iw_freq *	list,	/* List of frequency to fill */
+		  int		max)	/* Maximum number of frequencies */
+{
+  u_short	table[10];	/* Authorized frequency table */
+  long		freq = 0L;	/* offset to 2.4 GHz in .5 MHz + 12 MHz */
+  int		i;		/* index in the table */
+  const int	BAND_NUM = 10;	/* Number of bands */
+  int		c = 0;		/* Channel number */
+
+  /* Read the frequency table */
+  fee_read(base, 0x71 /* frequency table */,
+	   table, 10);
+
+  /* Look all frequencies */
+  i = 0;
+  for(freq = 0; freq < 150; freq++)
+    /* Look in the table if the frequency is allowed */
+    if(table[9 - (freq / 16)] & (1 << (freq % 16)))
+      {
+	/* Compute approximate channel number */
+	while((((channel_bands[c] >> 1) - 24) < freq) &&
+	      (c < BAND_NUM))
+	  c++;
+	list[i].i = c;	/* Set the list index */
+
+	/* put in the list */
+	list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
+	list[i++].e = 1;
+
+	/* Check number */
+	if(i >= max)
+	  return(i);
+      }
+
+  return(i);
+}
+
+#ifdef IW_WIRELESS_SPY
+/*------------------------------------------------------------------*/
+/*
+ * Gather wireless spy statistics : for each packet, compare the source
+ * address with out list, and if match, get the stats...
+ * Sorry, but this function really need wireless extensions...
+ */
+static inline void
+wl_spy_gather(struct net_device *	dev,
+	      u_char *	mac,		/* MAC address */
+	      u_char *	stats)		/* Statistics to gather */
+{
+  struct iw_quality wstats;
+
+  wstats.qual = stats[2] & MMR_SGNL_QUAL;
+  wstats.level = stats[0] & MMR_SIGNAL_LVL;
+  wstats.noise = stats[1] & MMR_SILENCE_LVL;
+  wstats.updated = 0x7;
+
+  /* Update spy records */
+  wireless_spy_update(dev, mac, &wstats);
+}
+#endif	/* IW_WIRELESS_SPY */
+
+#ifdef HISTOGRAM
+/*------------------------------------------------------------------*/
+/*
+ * This function calculate an histogram on the signal level.
+ * As the noise is quite constant, it's like doing it on the SNR.
+ * We have defined a set of interval (lp->his_range), and each time
+ * the level goes in that interval, we increment the count (lp->his_sum).
+ * With this histogram you may detect if one wavelan is really weak,
+ * or you may also calculate the mean and standard deviation of the level...
+ */
+static inline void
+wl_his_gather(struct net_device *	dev,
+	      u_char *	stats)		/* Statistics to gather */
+{
+  net_local *	lp = netdev_priv(dev);
+  u_char	level = stats[0] & MMR_SIGNAL_LVL;
+  int		i;
+
+  /* Find the correct interval */
+  i = 0;
+  while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++]))
+    ;
+
+  /* Increment interval counter */
+  (lp->his_sum[i])++;
+}
+#endif	/* HISTOGRAM */
+
+static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1);
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = wl_get_drvinfo
+};
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get protocol name
+ */
+static int wavelan_get_name(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	strcpy(wrqu->name, "WaveLAN");
+	return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set NWID
+ */
+static int wavelan_set_nwid(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	mm_t m;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Set NWID in WaveLAN. */
+	if (!wrqu->nwid.disabled) {
+		/* Set NWID in psa */
+		psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
+		psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
+		psa.psa_nwid_select = 0x01;
+		psa_write(dev,
+			  (char *) psa.psa_nwid - (char *) &psa,
+			  (unsigned char *) psa.psa_nwid, 3);
+
+		/* Set NWID in mmc. */
+		m.w.mmw_netw_id_l = psa.psa_nwid[1];
+		m.w.mmw_netw_id_h = psa.psa_nwid[0];
+		mmc_write(base,
+			  (char *) &m.w.mmw_netw_id_l -
+			  (char *) &m,
+			  (unsigned char *) &m.w.mmw_netw_id_l, 2);
+		mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00);
+	} else {
+		/* Disable NWID in the psa. */
+		psa.psa_nwid_select = 0x00;
+		psa_write(dev,
+			  (char *) &psa.psa_nwid_select -
+			  (char *) &psa,
+			  (unsigned char *) &psa.psa_nwid_select,
+			  1);
+
+		/* Disable NWID in the mmc (no filtering). */
+		mmc_out(base, mmwoff(0, mmw_loopt_sel),
+			MMW_LOOPT_SEL_DIS_NWID);
+	}
+	/* update the Wavelan checksum */
+	update_psa_checksum(dev);
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get NWID 
+ */
+static int wavelan_get_nwid(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Read the NWID. */
+	psa_read(dev,
+		 (char *) psa.psa_nwid - (char *) &psa,
+		 (unsigned char *) psa.psa_nwid, 3);
+	wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
+	wrqu->nwid.disabled = !(psa.psa_nwid_select);
+	wrqu->nwid.fixed = 1;	/* Superfluous */
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set frequency
+ */
+static int wavelan_set_freq(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	unsigned long flags;
+	int ret;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
+	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+		ret = wv_set_frequency(base, &(wrqu->freq));
+	else
+		ret = -EOPNOTSUPP;
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get frequency
+ */
+static int wavelan_get_freq(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
+	 * Does it work for everybody, especially old cards? */
+	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+		unsigned short freq;
+
+		/* Ask the EEPROM to read the frequency from the first area. */
+		fee_read(base, 0x00, &freq, 1);
+		wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
+		wrqu->freq.e = 1;
+	} else {
+		psa_read(dev,
+			 (char *) &psa.psa_subband - (char *) &psa,
+			 (unsigned char *) &psa.psa_subband, 1);
+
+		if (psa.psa_subband <= 4) {
+			wrqu->freq.m = fixed_bands[psa.psa_subband];
+			wrqu->freq.e = (psa.psa_subband != 0);
+		} else
+			ret = -EOPNOTSUPP;
+	}
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set level threshold
+ */
+static int wavelan_set_sens(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Set the level threshold. */
+	/* We should complain loudly if wrqu->sens.fixed = 0, because we
+	 * can't set auto mode... */
+	psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
+	psa_write(dev,
+		  (char *) &psa.psa_thr_pre_set - (char *) &psa,
+		  (unsigned char *) &psa.psa_thr_pre_set, 1);
+	/* update the Wavelan checksum */
+	update_psa_checksum(dev);
+	mmc_out(base, mmwoff(0, mmw_thr_pre_set),
+		psa.psa_thr_pre_set);
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get level threshold
+ */
+static int wavelan_get_sens(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Read the level threshold. */
+	psa_read(dev,
+		 (char *) &psa.psa_thr_pre_set - (char *) &psa,
+		 (unsigned char *) &psa.psa_thr_pre_set, 1);
+	wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
+	wrqu->sens.fixed = 1;
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set encryption key
+ */
+static int wavelan_set_encode(struct net_device *dev,
+			      struct iw_request_info *info,
+			      union iwreq_data *wrqu,
+			      char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	unsigned long flags;
+	psa_t psa;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+
+	/* Check if capable of encryption */
+	if (!mmc_encr(base)) {
+		ret = -EOPNOTSUPP;
+	}
+
+	/* Check the size of the key */
+	if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
+		ret = -EINVAL;
+	}
+
+	if(!ret) {
+		/* Basic checking... */
+		if (wrqu->encoding.length == 8) {
+			/* Copy the key in the driver */
+			memcpy(psa.psa_encryption_key, extra,
+			       wrqu->encoding.length);
+			psa.psa_encryption_select = 1;
+
+			psa_write(dev,
+				  (char *) &psa.psa_encryption_select -
+				  (char *) &psa,
+				  (unsigned char *) &psa.
+				  psa_encryption_select, 8 + 1);
+
+			mmc_out(base, mmwoff(0, mmw_encr_enable),
+				MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
+			mmc_write(base, mmwoff(0, mmw_encr_key),
+				  (unsigned char *) &psa.
+				  psa_encryption_key, 8);
+		}
+
+		/* disable encryption */
+		if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
+			psa.psa_encryption_select = 0;
+			psa_write(dev,
+				  (char *) &psa.psa_encryption_select -
+				  (char *) &psa,
+				  (unsigned char *) &psa.
+				  psa_encryption_select, 1);
+
+			mmc_out(base, mmwoff(0, mmw_encr_enable), 0);
+		}
+		/* update the Wavelan checksum */
+		update_psa_checksum(dev);
+	}
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get encryption key
+ */
+static int wavelan_get_encode(struct net_device *dev,
+			      struct iw_request_info *info,
+			      union iwreq_data *wrqu,
+			      char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Check if encryption is available */
+	if (!mmc_encr(base)) {
+		ret = -EOPNOTSUPP;
+	} else {
+		/* Read the encryption key */
+		psa_read(dev,
+			 (char *) &psa.psa_encryption_select -
+			 (char *) &psa,
+			 (unsigned char *) &psa.
+			 psa_encryption_select, 1 + 8);
+
+		/* encryption is enabled ? */
+		if (psa.psa_encryption_select)
+			wrqu->encoding.flags = IW_ENCODE_ENABLED;
+		else
+			wrqu->encoding.flags = IW_ENCODE_DISABLED;
+		wrqu->encoding.flags |= mmc_encr(base);
+
+		/* Copy the key to the user buffer */
+		wrqu->encoding.length = 8;
+		memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
+	}
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+#ifdef WAVELAN_ROAMING_EXT
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set ESSID (domain)
+ */
+static int wavelan_set_essid(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu,
+			     char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Check if disable */
+	if(wrqu->data.flags == 0)
+		lp->filter_domains = 0;
+	else {
+		char	essid[IW_ESSID_MAX_SIZE + 1];
+		char *	endp;
+
+		/* Terminate the string */
+		memcpy(essid, extra, wrqu->data.length);
+		essid[IW_ESSID_MAX_SIZE] = '\0';
+
+#ifdef DEBUG_IOCTL_INFO
+		printk(KERN_DEBUG "SetEssid : ``%s''\n", essid);
+#endif	/* DEBUG_IOCTL_INFO */
+
+		/* Convert to a number (note : Wavelan specific) */
+		lp->domain_id = simple_strtoul(essid, &endp, 16);
+		/* Has it worked  ? */
+		if(endp > essid)
+			lp->filter_domains = 1;
+		else {
+			lp->filter_domains = 0;
+			ret = -EINVAL;
+		}
+	}
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get ESSID (domain)
+ */
+static int wavelan_get_essid(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu,
+			     char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+
+	/* Is the domain ID active ? */
+	wrqu->data.flags = lp->filter_domains;
+
+	/* Copy Domain ID into a string (Wavelan specific) */
+	/* Sound crazy, be we can't have a snprintf in the kernel !!! */
+	sprintf(extra, "%lX", lp->domain_id);
+	extra[IW_ESSID_MAX_SIZE] = '\0';
+
+	/* Set the length */
+	wrqu->data.length = strlen(extra);
+
+	return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set AP address
+ */
+static int wavelan_set_wap(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+#ifdef DEBUG_IOCTL_INFO
+	printk(KERN_DEBUG "Set AP to : %pM\n", wrqu->ap_addr.sa_data);
+#endif	/* DEBUG_IOCTL_INFO */
+
+	return -EOPNOTSUPP;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get AP address
+ */
+static int wavelan_get_wap(struct net_device *dev,
+			   struct iw_request_info *info,
+			   union iwreq_data *wrqu,
+			   char *extra)
+{
+	/* Should get the real McCoy instead of own Ethernet address */
+	memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE);
+	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+
+	return -EOPNOTSUPP;
+}
+#endif	/* WAVELAN_ROAMING_EXT */
+
+#ifdef WAVELAN_ROAMING
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set mode
+ */
+static int wavelan_set_mode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+	unsigned long flags;
+	int ret = 0;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+
+	/* Check mode */
+	switch(wrqu->mode) {
+	case IW_MODE_ADHOC:
+		if(do_roaming) {
+			wv_roam_cleanup(dev);
+			do_roaming = 0;
+		}
+		break;
+	case IW_MODE_INFRA:
+		if(!do_roaming) {
+			wv_roam_init(dev);
+			do_roaming = 1;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get mode
+ */
+static int wavelan_get_mode(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	if(do_roaming)
+		wrqu->mode = IW_MODE_INFRA;
+	else
+		wrqu->mode = IW_MODE_ADHOC;
+
+	return 0;
+}
+#endif	/* WAVELAN_ROAMING */
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get range info
+ */
+static int wavelan_get_range(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu,
+			     char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	struct iw_range *range = (struct iw_range *) extra;
+	unsigned long flags;
+	int ret = 0;
+
+	/* Set the length (very important for backward compatibility) */
+	wrqu->data.length = sizeof(struct iw_range);
+
+	/* Set all the info we don't care or don't know about to zero */
+	memset(range, 0, sizeof(struct iw_range));
+
+	/* Set the Wireless Extension versions */
+	range->we_version_compiled = WIRELESS_EXT;
+	range->we_version_source = 9;
+
+	/* Set information in the range struct.  */
+	range->throughput = 1.4 * 1000 * 1000;	/* don't argue on this ! */
+	range->min_nwid = 0x0000;
+	range->max_nwid = 0xFFFF;
+
+	range->sensitivity = 0x3F;
+	range->max_qual.qual = MMR_SGNL_QUAL;
+	range->max_qual.level = MMR_SIGNAL_LVL;
+	range->max_qual.noise = MMR_SILENCE_LVL;
+	range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
+	/* Need to get better values for those two */
+	range->avg_qual.level = 30;
+	range->avg_qual.noise = 8;
+
+	range->num_bitrates = 1;
+	range->bitrate[0] = 2000000;	/* 2 Mb/s */
+
+	/* Event capability (kernel + driver) */
+	range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
+				IW_EVENT_CAPA_MASK(0x8B04) |
+				IW_EVENT_CAPA_MASK(0x8B06));
+	range->event_capa[1] = IW_EVENT_CAPA_K_1;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
+	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+		range->num_channels = 10;
+		range->num_frequency = wv_frequency_list(base, range->freq,
+							IW_MAX_FREQUENCIES);
+	} else
+		range->num_channels = range->num_frequency = 0;
+
+	/* Encryption supported ? */
+	if (mmc_encr(base)) {
+		range->encoding_size[0] = 8;	/* DES = 64 bits key */
+		range->num_encoding_sizes = 1;
+		range->max_encoding_tokens = 1;	/* Only one key possible */
+	} else {
+		range->num_encoding_sizes = 0;
+		range->max_encoding_tokens = 0;
+	}
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set quality threshold
+ */
+static int wavelan_set_qthr(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	unsigned int base = dev->base_addr;
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	psa.psa_quality_thr = *(extra) & 0x0F;
+	psa_write(dev,
+		  (char *) &psa.psa_quality_thr - (char *) &psa,
+		  (unsigned char *) &psa.psa_quality_thr, 1);
+	/* update the Wavelan checksum */
+	update_psa_checksum(dev);
+	mmc_out(base, mmwoff(0, mmw_quality_thr),
+		psa.psa_quality_thr);
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get quality threshold
+ */
+static int wavelan_get_qthr(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+	psa_t psa;
+	unsigned long flags;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	psa_read(dev,
+		 (char *) &psa.psa_quality_thr - (char *) &psa,
+		 (unsigned char *) &psa.psa_quality_thr, 1);
+	*(extra) = psa.psa_quality_thr & 0x0F;
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return 0;
+}
+
+#ifdef WAVELAN_ROAMING
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set roaming
+ */
+static int wavelan_set_roam(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	/* Disable interrupts and save flags. */
+	spin_lock_irqsave(&lp->spinlock, flags);
+	
+	/* Note : should check if user == root */
+	if(do_roaming && (*extra)==0)
+		wv_roam_cleanup(dev);
+	else if(do_roaming==0 && (*extra)!=0)
+		wv_roam_init(dev);
+
+	do_roaming = (*extra);
+
+	/* Enable interrupts and restore flags. */
+	spin_unlock_irqrestore(&lp->spinlock, flags);
+
+	return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get quality threshold
+ */
+static int wavelan_get_roam(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu,
+			    char *extra)
+{
+	*(extra) = do_roaming;
+
+	return 0;
+}
+#endif	/* WAVELAN_ROAMING */
+
+#ifdef HISTOGRAM
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set histogram
+ */
+static int wavelan_set_histo(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu,
+			     char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+
+	/* Check the number of intervals. */
+	if (wrqu->data.length > 16) {
+		return(-E2BIG);
+	}
+
+	/* Disable histo while we copy the addresses.
+	 * As we don't disable interrupts, we need to do this */
+	lp->his_number = 0;
+
+	/* Are there ranges to copy? */
+	if (wrqu->data.length > 0) {
+		/* Copy interval ranges to the driver */
+		memcpy(lp->his_range, extra, wrqu->data.length);
+
+		{
+		  int i;
+		  printk(KERN_DEBUG "Histo :");
+		  for(i = 0; i < wrqu->data.length; i++)
+		    printk(" %d", lp->his_range[i]);
+		  printk("\n");
+		}
+
+		/* Reset result structure. */
+		memset(lp->his_sum, 0x00, sizeof(long) * 16);
+	}
+
+	/* Now we can set the number of ranges */
+	lp->his_number = wrqu->data.length;
+
+	return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get histogram
+ */
+static int wavelan_get_histo(struct net_device *dev,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu,
+			     char *extra)
+{
+	net_local *lp = netdev_priv(dev);
+
+	/* Set the number of intervals. */
+	wrqu->data.length = lp->his_number;
+
+	/* Give back the distribution statistics */
+	if(lp->his_number > 0)
+		memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
+
+	return(0);
+}
+#endif			/* HISTOGRAM */
+
+/*------------------------------------------------------------------*/
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+static const struct iw_priv_args wavelan_private_args[] = {
+/*{ cmd,         set_args,                            get_args, name } */
+  { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
+  { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
+  { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" },
+  { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" },
+  { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16,                    0, "sethisto" },
+  { SIOCGIPHISTO, 0,                     IW_PRIV_TYPE_INT | 16, "gethisto" },
+};
+
+static const iw_handler		wavelan_handler[] =
+{
+	NULL,				/* SIOCSIWNAME */
+	wavelan_get_name,		/* SIOCGIWNAME */
+	wavelan_set_nwid,		/* SIOCSIWNWID */
+	wavelan_get_nwid,		/* SIOCGIWNWID */
+	wavelan_set_freq,		/* SIOCSIWFREQ */
+	wavelan_get_freq,		/* SIOCGIWFREQ */
+#ifdef WAVELAN_ROAMING
+	wavelan_set_mode,		/* SIOCSIWMODE */
+	wavelan_get_mode,		/* SIOCGIWMODE */
+#else	/* WAVELAN_ROAMING */
+	NULL,				/* SIOCSIWMODE */
+	NULL,				/* SIOCGIWMODE */
+#endif	/* WAVELAN_ROAMING */
+	wavelan_set_sens,		/* SIOCSIWSENS */
+	wavelan_get_sens,		/* SIOCGIWSENS */
+	NULL,				/* SIOCSIWRANGE */
+	wavelan_get_range,		/* SIOCGIWRANGE */
+	NULL,				/* SIOCSIWPRIV */
+	NULL,				/* SIOCGIWPRIV */
+	NULL,				/* SIOCSIWSTATS */
+	NULL,				/* SIOCGIWSTATS */
+	iw_handler_set_spy,		/* SIOCSIWSPY */
+	iw_handler_get_spy,		/* SIOCGIWSPY */
+	iw_handler_set_thrspy,		/* SIOCSIWTHRSPY */
+	iw_handler_get_thrspy,		/* SIOCGIWTHRSPY */
+#ifdef WAVELAN_ROAMING_EXT
+	wavelan_set_wap,		/* SIOCSIWAP */
+	wavelan_get_wap,		/* SIOCGIWAP */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCGIWAPLIST */
+	NULL,				/* -- hole -- */
+	NULL,				/* -- hole -- */
+	wavelan_set_essid,		/* SIOCSIWESSID */
+	wavelan_get_essid,		/* SIOCGIWESSID */
+#else	/* WAVELAN_ROAMING_EXT */
+	NULL,				/* SIOCSIWAP */
+	NULL,				/* SIOCGIWAP */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCGIWAPLIST */
+	NULL,				/* -- hole -- */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCSIWESSID */
+	NULL,				/* SIOCGIWESSID */
+#endif	/* WAVELAN_ROAMING_EXT */
+	NULL,				/* SIOCSIWNICKN */
+	NULL,				/* SIOCGIWNICKN */
+	NULL,				/* -- hole -- */
+	NULL,				/* -- hole -- */
+	NULL,				/* SIOCSIWRATE */
+	NULL,				/* SIOCGIWRATE */
+	NULL,				/* SIOCSIWRTS */
+	NULL,				/* SIOCGIWRTS */
+	NULL,				/* SIOCSIWFRAG */
+	NULL,				/* SIOCGIWFRAG */
+	NULL,				/* SIOCSIWTXPOW */
+	NULL,				/* SIOCGIWTXPOW */
+	NULL,				/* SIOCSIWRETRY */
+	NULL,				/* SIOCGIWRETRY */
+	wavelan_set_encode,		/* SIOCSIWENCODE */
+	wavelan_get_encode,		/* SIOCGIWENCODE */
+};
+
+static const iw_handler		wavelan_private_handler[] =
+{
+	wavelan_set_qthr,		/* SIOCIWFIRSTPRIV */
+	wavelan_get_qthr,		/* SIOCIWFIRSTPRIV + 1 */
+#ifdef WAVELAN_ROAMING
+	wavelan_set_roam,		/* SIOCIWFIRSTPRIV + 2 */
+	wavelan_get_roam,		/* SIOCIWFIRSTPRIV + 3 */
+#else	/* WAVELAN_ROAMING */
+	NULL,				/* SIOCIWFIRSTPRIV + 2 */
+	NULL,				/* SIOCIWFIRSTPRIV + 3 */
+#endif	/* WAVELAN_ROAMING */
+#ifdef HISTOGRAM
+	wavelan_set_histo,		/* SIOCIWFIRSTPRIV + 4 */
+	wavelan_get_histo,		/* SIOCIWFIRSTPRIV + 5 */
+#endif	/* HISTOGRAM */
+};
+
+static const struct iw_handler_def	wavelan_handler_def =
+{
+	.num_standard	= ARRAY_SIZE(wavelan_handler),
+	.num_private	= ARRAY_SIZE(wavelan_private_handler),
+	.num_private_args = ARRAY_SIZE(wavelan_private_args),
+	.standard	= wavelan_handler,
+	.private	= wavelan_private_handler,
+	.private_args	= wavelan_private_args,
+	.get_wireless_stats = wavelan_get_wireless_stats,
+};
+
+/*------------------------------------------------------------------*/
+/*
+ * Get wireless statistics
+ * Called by /proc/net/wireless...
+ */
+static iw_stats *
+wavelan_get_wireless_stats(struct net_device *	dev)
+{
+  unsigned int		base = dev->base_addr;
+  net_local *		lp = netdev_priv(dev);
+  mmr_t			m;
+  iw_stats *		wstats;
+  unsigned long		flags;
+
+#ifdef DEBUG_IOCTL_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
+#endif
+
+  /* Disable interrupts & save flags */
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  wstats = &lp->wstats;
+
+  /* Get data from the mmc */
+  mmc_out(base, mmwoff(0, mmw_freeze), 1);
+
+  mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
+  mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2);
+  mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4);
+
+  mmc_out(base, mmwoff(0, mmw_freeze), 0);
+
+  /* Copy data to wireless stuff */
+  wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
+  wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
+  wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
+  wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
+  wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) |
+			  ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) |
+			  ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
+  wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
+  wstats->discard.code = 0L;
+  wstats->discard.misc = 0L;
+
+  /* ReEnable interrupts & restore flags */
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_IOCTL_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
+#endif
+  return &lp->wstats;
+}
+
+/************************* PACKET RECEPTION *************************/
+/*
+ * This part deal with receiving the packets.
+ * The interrupt handler get an interrupt when a packet has been
+ * successfully received and called this part...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Calculate the starting address of the frame pointed to by the receive
+ * frame pointer and verify that the frame seem correct
+ * (called by wv_packet_rcv())
+ */
+static int
+wv_start_of_frame(struct net_device *	dev,
+		  int		rfp,	/* end of frame */
+		  int		wrap)	/* start of buffer */
+{
+  unsigned int	base = dev->base_addr;
+  int		rp;
+  int		len;
+
+  rp = (rfp - 5 + RX_SIZE) % RX_SIZE;
+  outb(rp & 0xff, PIORL(base));
+  outb(((rp >> 8) & PIORH_MASK), PIORH(base));
+  len = inb(PIOP(base));
+  len |= inb(PIOP(base)) << 8;
+
+  /* Sanity checks on size */
+  /* Frame too big */
+  if(len > MAXDATAZ + 100)
+    {
+#ifdef DEBUG_RX_ERROR
+      printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n",
+	     dev->name, rfp, len);
+#endif
+      return(-1);
+    }
+  
+  /* Frame too short */
+  if(len < 7)
+    {
+#ifdef DEBUG_RX_ERROR
+      printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n",
+	     dev->name, rfp, len);
+#endif
+      return(-1);
+    }
+  
+  /* Wrap around buffer */
+  if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE))	/* magic formula ! */
+    {
+#ifdef DEBUG_RX_ERROR
+      printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n",
+	     dev->name, wrap, rfp, len);
+#endif
+      return(-1);
+    }
+
+  return((rp - len + RX_SIZE) % RX_SIZE);
+} /* wv_start_of_frame */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does the actual copy of data (including the ethernet
+ * header structure) from the WaveLAN card to an sk_buff chain that
+ * will be passed up to the network interface layer. NOTE: We
+ * currently don't handle trailer protocols (neither does the rest of
+ * the network interface), so if that is needed, it will (at least in
+ * part) be added here.  The contents of the receive ring buffer are
+ * copied to a message chain that is then passed to the kernel.
+ *
+ * Note: if any errors occur, the packet is "dropped on the floor"
+ * (called by wv_packet_rcv())
+ */
+static void
+wv_packet_read(struct net_device *		dev,
+	       int		fd_p,
+	       int		sksize)
+{
+  net_local *		lp = netdev_priv(dev);
+  struct sk_buff *	skb;
+
+#ifdef DEBUG_RX_TRACE
+  printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
+	 dev->name, fd_p, sksize);
+#endif
+
+  /* Allocate some buffer for the new packet */
+  if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL)
+    {
+#ifdef DEBUG_RX_ERROR
+      printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n",
+	     dev->name, sksize);
+#endif
+      dev->stats.rx_dropped++;
+      /*
+       * Not only do we want to return here, but we also need to drop the
+       * packet on the floor to clear the interrupt.
+       */
+      return;
+    }
+
+  skb_reserve(skb, 2);
+  fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize);
+  skb->protocol = eth_type_trans(skb, dev);
+
+#ifdef DEBUG_RX_INFO
+  wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read");
+#endif	/* DEBUG_RX_INFO */
+     
+  /* Statistics gathering & stuff associated.
+   * It seem a bit messy with all the define, but it's really simple... */
+  if(
+#ifdef IW_WIRELESS_SPY
+     (lp->spy_data.spy_number > 0) ||
+#endif	/* IW_WIRELESS_SPY */
+#ifdef HISTOGRAM
+     (lp->his_number > 0) ||
+#endif	/* HISTOGRAM */
+#ifdef WAVELAN_ROAMING
+     (do_roaming) ||
+#endif	/* WAVELAN_ROAMING */
+     0)
+    {
+      u_char	stats[3];	/* Signal level, Noise level, Signal quality */
+
+      /* read signal level, silence level and signal quality bytes */
+      fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE,
+			  stats, 3);
+#ifdef DEBUG_RX_INFO
+      printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
+	     dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F);
+#endif
+
+#ifdef WAVELAN_ROAMING
+      if(do_roaming)
+	if(WAVELAN_BEACON(skb->data))
+	  wl_roam_gather(dev, skb->data, stats);
+#endif	/* WAVELAN_ROAMING */
+	  
+#ifdef WIRELESS_SPY
+      wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats);
+#endif	/* WIRELESS_SPY */
+#ifdef HISTOGRAM
+      wl_his_gather(dev, stats);
+#endif	/* HISTOGRAM */
+    }
+
+  /*
+   * Hand the packet to the Network Module
+   */
+  netif_rx(skb);
+
+  /* Keep stats up to date */
+  dev->stats.rx_packets++;
+  dev->stats.rx_bytes += sksize;
+
+#ifdef DEBUG_RX_TRACE
+  printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
+#endif
+  return;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called by the interrupt handler to initiate a
+ * packet transfer from the card to the network interface layer above
+ * this driver.  This routine checks if a buffer has been successfully
+ * received by the WaveLAN card.  If so, the routine wv_packet_read is
+ * called to do the actual transfer of the card's data including the
+ * ethernet header into a packet consisting of an sk_buff chain.
+ * (called by wavelan_interrupt())
+ * Note : the spinlock is already grabbed for us and irq are disabled.
+ */
+static void
+wv_packet_rcv(struct net_device *	dev)
+{
+  unsigned int	base = dev->base_addr;
+  net_local *	lp = netdev_priv(dev);
+  int		newrfp;
+  int		rp;
+  int		len;
+  int		f_start;
+  int		status;
+  int		i593_rfp;
+  int		stat_ptr;
+  u_char	c[4];
+
+#ifdef DEBUG_RX_TRACE
+  printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name);
+#endif
+
+  /* Get the new receive frame pointer from the i82593 chip */
+  outb(CR0_STATUS_2 | OP0_NOP, LCCR(base));
+  i593_rfp = inb(LCSR(base));
+  i593_rfp |= inb(LCSR(base)) << 8;
+  i593_rfp %= RX_SIZE;
+
+  /* Get the new receive frame pointer from the WaveLAN card.
+   * It is 3 bytes more than the increment of the i82593 receive
+   * frame pointer, for each packet. This is because it includes the
+   * 3 roaming bytes added by the mmc.
+   */
+  newrfp = inb(RPLL(base));
+  newrfp |= inb(RPLH(base)) << 8;
+  newrfp %= RX_SIZE;
+
+#ifdef DEBUG_RX_INFO
+  printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
+	 dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
+#endif
+
+#ifdef DEBUG_RX_ERROR
+  /* If no new frame pointer... */
+  if(lp->overrunning || newrfp == lp->rfp)
+    printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
+	   dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
+#endif
+
+  /* Read all frames (packets) received */
+  while(newrfp != lp->rfp)
+    {
+      /* A frame is composed of the packet, followed by a status word,
+       * the length of the frame (word) and the mmc info (SNR & qual).
+       * It's because the length is at the end that we can only scan
+       * frames backward. */
+
+      /* Find the first frame by skipping backwards over the frames */
+      rp = newrfp;	/* End of last frame */
+      while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) &&
+	    (f_start != -1))
+	  rp = f_start;
+
+      /* If we had a problem */
+      if(f_start == -1)
+	{
+#ifdef DEBUG_RX_ERROR
+	  printk(KERN_INFO "wavelan_cs: cannot find start of frame ");
+	  printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
+		 i593_rfp, lp->stop, newrfp, lp->rfp);
+#endif
+	  lp->rfp = rp;		/* Get to the last usable frame */
+	  continue;
+	}
+
+      /* f_start point to the beggining of the first frame received
+       * and rp to the beggining of the next one */
+
+      /* Read status & length of the frame */
+      stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE;
+      stat_ptr = read_ringbuf(dev, stat_ptr, c, 4);
+      status = c[0] | (c[1] << 8);
+      len = c[2] | (c[3] << 8);
+
+      /* Check status */
+      if((status & RX_RCV_OK) != RX_RCV_OK)
+	{
+	  dev->stats.rx_errors++;
+	  if(status & RX_NO_SFD)
+	    dev->stats.rx_frame_errors++;
+	  if(status & RX_CRC_ERR)
+	    dev->stats.rx_crc_errors++;
+	  if(status & RX_OVRRUN)
+	    dev->stats.rx_over_errors++;
+
+#ifdef DEBUG_RX_FAIL
+	  printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n",
+		 dev->name, status);
+#endif
+	}
+      else
+	/* Read the packet and transmit to Linux */
+	wv_packet_read(dev, f_start, len - 2);
+
+      /* One frame has been processed, skip it */
+      lp->rfp = rp;
+    }
+
+  /*
+   * Update the frame stop register, but set it to less than
+   * the full 8K to allow space for 3 bytes of signal strength
+   * per packet.
+   */
+  lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
+  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
+  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
+  outb(OP1_SWIT_TO_PORT_0, LCCR(base));
+
+#ifdef DEBUG_RX_TRACE
+  printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name);
+#endif
+}
+
+/*********************** PACKET TRANSMISSION ***********************/
+/*
+ * This part deal with sending packet through the wavelan
+ * We copy the packet to the send buffer and then issue the send
+ * command to the i82593. The result of this operation will be
+ * checked in wavelan_interrupt()
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine fills in the appropriate registers and memory
+ * locations on the WaveLAN card and starts the card off on
+ * the transmit.
+ * (called in wavelan_packet_xmit())
+ */
+static void
+wv_packet_write(struct net_device *	dev,
+		void *		buf,
+		short		length)
+{
+  net_local *		lp = netdev_priv(dev);
+  unsigned int		base = dev->base_addr;
+  unsigned long		flags;
+  int			clen = length;
+  register u_short	xmtdata_base = TX_BASE;
+
+#ifdef DEBUG_TX_TRACE
+  printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
+#endif
+
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  /* Write the length of data buffer followed by the buffer */
+  outb(xmtdata_base & 0xff, PIORL(base));
+  outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+  outb(clen & 0xff, PIOP(base));	/* lsb */
+  outb(clen >> 8, PIOP(base));  	/* msb */
+
+  /* Send the data */
+  outsb(PIOP(base), buf, clen);
+
+  /* Indicate end of transmit chain */
+  outb(OP0_NOP, PIOP(base));
+  /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */
+  outb(OP0_NOP, PIOP(base));
+
+  /* Reset the transmit DMA pointer */
+  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+  hacr_write(base, HACR_DEFAULT);
+  /* Send the transmit command */
+  wv_82593_cmd(dev, "wv_packet_write(): transmit",
+	       OP0_TRANSMIT, SR0_NO_RESULT);
+
+  /* Make sure the watchdog will keep quiet for a while */
+  dev->trans_start = jiffies;
+
+  /* Keep stats up to date */
+  dev->stats.tx_bytes += length;
+
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_TX_INFO
+  wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
+#endif	/* DEBUG_TX_INFO */
+
+#ifdef DEBUG_TX_TRACE
+  printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called when we want to send a packet (NET3 callback)
+ * In this routine, we check if the harware is ready to accept
+ * the packet. We also prevent reentrance. Then, we call the function
+ * to send the packet...
+ */
+static netdev_tx_t
+wavelan_packet_xmit(struct sk_buff *	skb,
+		    struct net_device *		dev)
+{
+  net_local *		lp = netdev_priv(dev);
+  unsigned long		flags;
+
+#ifdef DEBUG_TX_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
+	 (unsigned) skb);
+#endif
+
+  /*
+   * Block a timer-based transmit from overlapping a previous transmit.
+   * In other words, prevent reentering this routine.
+   */
+  netif_stop_queue(dev);
+
+  /* If somebody has asked to reconfigure the controller,
+   * we can do it now */
+  if(lp->reconfig_82593)
+    {
+      spin_lock_irqsave(&lp->spinlock, flags);	/* Disable interrupts */
+      wv_82593_config(dev);
+      spin_unlock_irqrestore(&lp->spinlock, flags);	/* Re-enable interrupts */
+      /* Note : the configure procedure was totally synchronous,
+       * so the Tx buffer is now free */
+    }
+
+	/* Check if we need some padding */
+	/* Note : on wireless the propagation time is in the order of 1us,
+	 * and we don't have the Ethernet specific requirement of beeing
+	 * able to detect collisions, therefore in theory we don't really
+	 * need to pad. Jean II */
+	if (skb_padto(skb, ETH_ZLEN))
+		return NETDEV_TX_OK;
+
+  wv_packet_write(dev, skb->data, skb->len);
+
+  dev_kfree_skb(skb);
+
+#ifdef DEBUG_TX_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
+#endif
+  return NETDEV_TX_OK;
+}
+
+/********************** HARDWARE CONFIGURATION **********************/
+/*
+ * This part do the real job of starting and configuring the hardware.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to initialize the Modem Management Controller.
+ * (called by wv_hw_config())
+ */
+static int
+wv_mmc_init(struct net_device *	dev)
+{
+  unsigned int	base = dev->base_addr;
+  psa_t		psa;
+  mmw_t		m;
+  int		configured;
+  int		i;		/* Loop counter */
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
+#endif
+
+  /* Read the parameter storage area */
+  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+
+  /*
+   * Check the first three octets of the MAC addr for the manufacturer's code.
+   * Note: If you get the error message below, you've got a
+   * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
+   * how to configure your card...
+   */
+  for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
+    if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
+        (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
+        (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
+      break;
+
+  /* If we have not found it... */
+  if (i == ARRAY_SIZE(MAC_ADDRESSES))
+    {
+#ifdef DEBUG_CONFIG_ERRORS
+      printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
+	     dev->name, psa.psa_univ_mac_addr[0],
+	     psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]);
+#endif
+      return FALSE;
+    }
+
+  /* Get the MAC address */
+  memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE);
+
+#ifdef USE_PSA_CONFIG
+  configured = psa.psa_conf_status & 1;
+#else
+  configured = 0;
+#endif
+
+  /* Is the PSA is not configured */
+  if(!configured)
+    {
+      /* User will be able to configure NWID after (with iwconfig) */
+      psa.psa_nwid[0] = 0;
+      psa.psa_nwid[1] = 0;
+
+      /* As NWID is not set : no NWID checking */
+      psa.psa_nwid_select = 0;
+
+      /* Disable encryption */
+      psa.psa_encryption_select = 0;
+
+      /* Set to standard values
+       * 0x04 for AT,
+       * 0x01 for MCA,
+       * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
+       */
+      if (psa.psa_comp_number & 1)
+	psa.psa_thr_pre_set = 0x01;
+      else
+	psa.psa_thr_pre_set = 0x04;
+      psa.psa_quality_thr = 0x03;
+
+      /* It is configured */
+      psa.psa_conf_status |= 1;
+
+#ifdef USE_PSA_CONFIG
+      /* Write the psa */
+      psa_write(dev, (char *)psa.psa_nwid - (char *)&psa,
+		(unsigned char *)psa.psa_nwid, 4);
+      psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa,
+		(unsigned char *)&psa.psa_thr_pre_set, 1);
+      psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa,
+		(unsigned char *)&psa.psa_quality_thr, 1);
+      psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa,
+		(unsigned char *)&psa.psa_conf_status, 1);
+      /* update the Wavelan checksum */
+      update_psa_checksum(dev);
+#endif	/* USE_PSA_CONFIG */
+    }
+
+  /* Zero the mmc structure */
+  memset(&m, 0x00, sizeof(m));
+
+  /* Copy PSA info to the mmc */
+  m.mmw_netw_id_l = psa.psa_nwid[1];
+  m.mmw_netw_id_h = psa.psa_nwid[0];
+  
+  if(psa.psa_nwid_select & 1)
+    m.mmw_loopt_sel = 0x00;
+  else
+    m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
+
+  memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, 
+	 sizeof(m.mmw_encr_key));
+
+  if(psa.psa_encryption_select)
+    m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
+  else
+    m.mmw_encr_enable = 0;
+
+  m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
+  m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
+
+  /*
+   * Set default modem control parameters.
+   * See NCR document 407-0024326 Rev. A.
+   */
+  m.mmw_jabber_enable = 0x01;
+  m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
+  m.mmw_ifs = 0x20;
+  m.mmw_mod_delay = 0x04;
+  m.mmw_jam_time = 0x38;
+
+  m.mmw_des_io_invert = 0;
+  m.mmw_freeze = 0;
+  m.mmw_decay_prm = 0;
+  m.mmw_decay_updat_prm = 0;
+
+  /* Write all info to mmc */
+  mmc_write(base, 0, (u_char *)&m, sizeof(m));
+
+  /* The following code start the modem of the 2.00 frequency
+   * selectable cards at power on. It's not strictly needed for the
+   * following boots...
+   * The original patch was by Joe Finney for the PCMCIA driver, but
+   * I've cleaned it a bit and add documentation.
+   * Thanks to Loeke Brederveld from Lucent for the info.
+   */
+
+  /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
+   * (does it work for everybody ? - especially old cards...) */
+  /* Note : WFREQSEL verify that it is able to read from EEprom
+   * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
+   * is 0xA (Xilinx version) or 0xB (Ariadne version).
+   * My test is more crude but do work... */
+  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+    {
+      /* We must download the frequency parameters to the
+       * synthetisers (from the EEprom - area 1)
+       * Note : as the EEprom is auto decremented, we set the end
+       * if the area... */
+      m.mmw_fee_addr = 0x0F;
+      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
+      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
+		(unsigned char *)&m.mmw_fee_ctrl, 2);
+
+      /* Wait until the download is finished */
+      fee_wait(base, 100, 100);
+
+#ifdef DEBUG_CONFIG_INFO
+      /* The frequency was in the last word downloaded... */
+      mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m,
+	       (unsigned char *)&m.mmw_fee_data_l, 2);
+
+      /* Print some info for the user */
+      printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n",
+	     dev->name,
+	     ((m.mmw_fee_data_h << 4) |
+	      (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L);
+#endif
+
+      /* We must now download the power adjust value (gain) to
+       * the synthetisers (from the EEprom - area 7 - DAC) */
+      m.mmw_fee_addr = 0x61;
+      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
+      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
+		(unsigned char *)&m.mmw_fee_ctrl, 2);
+
+      /* Wait until the download is finished */
+    }	/* if 2.00 card */
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
+#endif
+  return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to gracefully turn off reception, and wait for any commands
+ * to complete.
+ * (called in wv_ru_start() and wavelan_close() and wavelan_event())
+ */
+static int
+wv_ru_stop(struct net_device *	dev)
+{
+  unsigned int	base = dev->base_addr;
+  net_local *	lp = netdev_priv(dev);
+  unsigned long	flags;
+  int		status;
+  int		spin;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
+#endif
+
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  /* First, send the LAN controller a stop receive command */
+  wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
+	       OP0_STOP_RCV, SR0_NO_RESULT);
+
+  /* Then, spin until the receive unit goes idle */
+  spin = 300;
+  do
+    {
+      udelay(10);
+      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+      status = inb(LCSR(base));
+    }
+  while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));
+
+  /* Now, spin until the chip finishes executing its current command */
+  do
+    {
+      udelay(10);
+      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+      status = inb(LCSR(base));
+    }
+  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
+
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+  /* If there was a problem */
+  if(spin <= 0)
+    {
+#ifdef DEBUG_CONFIG_ERRORS
+      printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
+	     dev->name);
+#endif
+      return FALSE;
+    }
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name);
+#endif
+  return TRUE;
+} /* wv_ru_stop */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine starts the receive unit running.  First, it checks if
+ * the card is actually ready. Then the card is instructed to receive
+ * packets again.
+ * (called in wv_hw_reset() & wavelan_open())
+ */
+static int
+wv_ru_start(struct net_device *	dev)
+{
+  unsigned int	base = dev->base_addr;
+  net_local *	lp = netdev_priv(dev);
+  unsigned long	flags;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
+#endif
+
+  /*
+   * We need to start from a quiescent state. To do so, we could check
+   * if the card is already running, but instead we just try to shut
+   * it down. First, we disable reception (in case it was already enabled).
+   */
+  if(!wv_ru_stop(dev))
+    return FALSE;
+
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  /* Now we know that no command is being executed. */
+
+  /* Set the receive frame pointer and stop pointer */
+  lp->rfp = 0;
+  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
+
+  /* Reset ring management.  This sets the receive frame pointer to 1 */
+  outb(OP1_RESET_RING_MNGMT, LCCR(base));
+
+#if 0
+  /* XXX the i82593 manual page 6-4 seems to indicate that the stop register
+     should be set as below */
+  /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
+#elif 0
+  /* but I set it 0 instead */
+  lp->stop = 0;
+#else
+  /* but I set it to 3 bytes per packet less than 8K */
+  lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
+#endif
+  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
+  outb(OP1_INT_ENABLE, LCCR(base));
+  outb(OP1_SWIT_TO_PORT_0, LCCR(base));
+
+  /* Reset receive DMA pointer */
+  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+  hacr_write_slow(base, HACR_DEFAULT);
+
+  /* Receive DMA on channel 1 */
+  wv_82593_cmd(dev, "wv_ru_start(): rcv-enable",
+	       CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT);
+
+#ifdef DEBUG_I82593_SHOW
+  {
+    int	status;
+    int	opri;
+    int	spin = 10000;
+
+    /* spin until the chip starts receiving */
+    do
+      {
+	outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+	status = inb(LCSR(base));
+	if(spin-- <= 0)
+	  break;
+      }
+    while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
+	  ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY));
+    printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n",
+	   (status & SR3_RCV_STATE_MASK), i);
+  }
+#endif
+
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
+#endif
+  return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does a standard config of the WaveLAN controller (i82593).
+ * In the ISA driver, this is integrated in wavelan_hardware_reset()
+ * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit())
+ */
+static int
+wv_82593_config(struct net_device *	dev)
+{
+  unsigned int			base = dev->base_addr;
+  net_local *			lp = netdev_priv(dev);
+  struct i82593_conf_block	cfblk;
+  int				ret = TRUE;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
+#endif
+
+  /* Create & fill i82593 config block
+   *
+   * Now conform to Wavelan document WCIN085B
+   */
+  memset(&cfblk, 0x00, sizeof(struct i82593_conf_block));
+  cfblk.d6mod = FALSE;  	/* Run in i82593 advanced mode */
+  cfblk.fifo_limit = 5;         /* = 56 B rx and 40 B tx fifo thresholds */
+  cfblk.forgnesi = FALSE;       /* 0=82C501, 1=AMD7992B compatibility */
+  cfblk.fifo_32 = 1;
+  cfblk.throttle_enb = FALSE;
+  cfblk.contin = TRUE;          /* enable continuous mode */
+  cfblk.cntrxint = FALSE;       /* enable continuous mode receive interrupts */
+  cfblk.addr_len = WAVELAN_ADDR_SIZE;
+  cfblk.acloc = TRUE;           /* Disable source addr insertion by i82593 */
+  cfblk.preamb_len = 0;         /* 2 bytes preamble (SFD) */
+  cfblk.loopback = FALSE;
+  cfblk.lin_prio = 0;   	/* conform to 802.3 backoff algorithm */
+  cfblk.exp_prio = 5;	        /* conform to 802.3 backoff algorithm */
+  cfblk.bof_met = 1;	        /* conform to 802.3 backoff algorithm */
+  cfblk.ifrm_spc = 0x20 >> 4;	/* 32 bit times interframe spacing */
+  cfblk.slottim_low = 0x20 >> 5;	/* 32 bit times slot time */
+  cfblk.slottim_hi = 0x0;
+  cfblk.max_retr = 15;
+  cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE);	/* Promiscuous mode */
+  cfblk.bc_dis = FALSE;         /* Enable broadcast reception */
+  cfblk.crs_1 = TRUE;		/* Transmit without carrier sense */
+  cfblk.nocrc_ins = FALSE;	/* i82593 generates CRC */	
+  cfblk.crc_1632 = FALSE;	/* 32-bit Autodin-II CRC */
+  cfblk.crs_cdt = FALSE;	/* CD not to be interpreted as CS */
+  cfblk.cs_filter = 0;  	/* CS is recognized immediately */
+  cfblk.crs_src = FALSE;	/* External carrier sense */
+  cfblk.cd_filter = 0;  	/* CD is recognized immediately */
+  cfblk.min_fr_len = ETH_ZLEN >> 2;     /* Minimum frame length 64 bytes */
+  cfblk.lng_typ = FALSE;	/* Length field > 1500 = type field */
+  cfblk.lng_fld = TRUE; 	/* Disable 802.3 length field check */
+  cfblk.rxcrc_xf = TRUE;	/* Don't transfer CRC to memory */
+  cfblk.artx = TRUE;		/* Disable automatic retransmission */
+  cfblk.sarec = TRUE;		/* Disable source addr trig of CD */
+  cfblk.tx_jabber = TRUE;	/* Disable jabber jam sequence */
+  cfblk.hash_1 = FALSE; 	/* Use bits 0-5 in mc address hash */
+  cfblk.lbpkpol = TRUE; 	/* Loopback pin active high */
+  cfblk.fdx = FALSE;		/* Disable full duplex operation */
+  cfblk.dummy_6 = 0x3f; 	/* all ones */
+  cfblk.mult_ia = FALSE;	/* No multiple individual addresses */
+  cfblk.dis_bof = FALSE;	/* Disable the backoff algorithm ?! */
+  cfblk.dummy_1 = TRUE; 	/* set to 1 */
+  cfblk.tx_ifs_retrig = 3;	/* Hmm... Disabled */
+#ifdef MULTICAST_ALL
+  cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE);	/* Allow all multicasts */
+#else
+  cfblk.mc_all = FALSE;		/* No multicast all mode */
+#endif
+  cfblk.rcv_mon = 0;		/* Monitor mode disabled */
+  cfblk.frag_acpt = TRUE;	/* Do not accept fragments */
+  cfblk.tstrttrs = FALSE;	/* No start transmission threshold */
+  cfblk.fretx = TRUE;		/* FIFO automatic retransmission */
+  cfblk.syncrqs = FALSE; 	/* Synchronous DRQ deassertion... */
+  cfblk.sttlen = TRUE;  	/* 6 byte status registers */
+  cfblk.rx_eop = TRUE;  	/* Signal EOP on packet reception */
+  cfblk.tx_eop = TRUE;  	/* Signal EOP on packet transmission */
+  cfblk.rbuf_size = RX_SIZE>>11;	/* Set receive buffer size */
+  cfblk.rcvstop = TRUE; 	/* Enable Receive Stop Register */
+
+#ifdef DEBUG_I82593_SHOW
+  print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
+		 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
+#endif
+
+  /* Copy the config block to the i82593 */
+  outb(TX_BASE & 0xff, PIORL(base));
+  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+  outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base));    /* lsb */
+  outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base));	/* msb */
+  outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block));
+
+  /* reset transmit DMA pointer */
+  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+  hacr_write(base, HACR_DEFAULT);
+  if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
+		   OP0_CONFIGURE, SR0_CONFIGURE_DONE))
+    ret = FALSE;
+
+  /* Initialize adapter's ethernet MAC address */
+  outb(TX_BASE & 0xff, PIORL(base));
+  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+  outb(WAVELAN_ADDR_SIZE, PIOP(base));	/* byte count lsb */
+  outb(0, PIOP(base));			/* byte count msb */
+  outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE);
+
+  /* reset transmit DMA pointer */
+  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+  hacr_write(base, HACR_DEFAULT);
+  if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
+		   OP0_IA_SETUP, SR0_IA_SETUP_DONE))
+    ret = FALSE;
+
+#ifdef WAVELAN_ROAMING
+    /* If roaming is enabled, join the "Beacon Request" multicast group... */
+    /* But only if it's not in there already! */
+  if(do_roaming)
+    dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1);
+#endif	/* WAVELAN_ROAMING */
+
+  /* If any multicast address to set */
+  if(lp->mc_count)
+    {
+      struct dev_mc_list *	dmi;
+      int			addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;
+
+#ifdef DEBUG_CONFIG_INFO
+      printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
+	     dev->name, lp->mc_count);
+      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
+	printk(KERN_DEBUG " %pM\n", dmi->dmi_addr);
+#endif
+
+      /* Initialize adapter's ethernet multicast addresses */
+      outb(TX_BASE & 0xff, PIORL(base));
+      outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+      outb(addrs_len & 0xff, PIOP(base));	/* byte count lsb */
+      outb((addrs_len >> 8), PIOP(base));	/* byte count msb */
+      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
+	outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen);
+
+      /* reset transmit DMA pointer */
+      hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+      hacr_write(base, HACR_DEFAULT);
+      if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
+		       OP0_MC_SETUP, SR0_MC_SETUP_DONE))
+	ret = FALSE;
+      lp->mc_count = dev->mc_count;	/* remember to avoid repeated reset */
+    }
+
+  /* Job done, clear the flag */
+  lp->reconfig_82593 = FALSE;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
+#endif
+  return(ret);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read the Access Configuration Register, perform a software reset,
+ * and then re-enable the card's software.
+ *
+ * If I understand correctly : reset the pcmcia interface of the
+ * wavelan.
+ * (called by wv_config())
+ */
+static int
+wv_pcmcia_reset(struct net_device *	dev)
+{
+  int		i;
+  conf_reg_t	reg = { 0, CS_READ, CISREG_COR, 0 };
+  struct pcmcia_device *	link = ((net_local *)netdev_priv(dev))->link;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name);
+#endif
+
+  i = pcmcia_access_configuration_register(link, &reg);
+  if (i != 0)
+      return FALSE;
+      
+#ifdef DEBUG_CONFIG_INFO
+  printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
+	 dev->name, (u_int) reg.Value);
+#endif
+
+  reg.Action = CS_WRITE;
+  reg.Value = reg.Value | COR_SW_RESET;
+  i = pcmcia_access_configuration_register(link, &reg);
+  if (i != 0)
+      return FALSE;
+      
+  reg.Action = CS_WRITE;
+  reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
+  i = pcmcia_access_configuration_register(link, &reg);
+  if (i != 0)
+      return FALSE;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
+#endif
+  return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * wavelan_hw_config() is called after a CARD_INSERTION event is
+ * received, to configure the wavelan hardware.
+ * Note that the reception will be enabled in wavelan->open(), so the
+ * device is configured but idle...
+ * Performs the following actions:
+ * 	1. A pcmcia software reset (using wv_pcmcia_reset())
+ *	2. A power reset (reset DMA)
+ *	3. Reset the LAN controller
+ *	4. Initialize the radio modem (using wv_mmc_init)
+ *	5. Configure LAN controller (using wv_82593_config)
+ *	6. Perform a diagnostic on the LAN controller
+ * (called by wavelan_event() & wv_hw_reset())
+ */
+static int
+wv_hw_config(struct net_device *	dev)
+{
+  net_local *		lp = netdev_priv(dev);
+  unsigned int		base = dev->base_addr;
+  unsigned long		flags;
+  int			ret = FALSE;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
+#endif
+
+  /* compile-time check the sizes of structures */
+  BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
+  BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
+  BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);
+
+  /* Reset the pcmcia interface */
+  if(wv_pcmcia_reset(dev) == FALSE)
+    return FALSE;
+
+  /* Disable interrupts */
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  /* Disguised goto ;-) */
+  do
+    {
+      /* Power UP the module + reset the modem + reset host adapter
+       * (in fact, reset DMA channels) */
+      hacr_write_slow(base, HACR_RESET);
+      hacr_write(base, HACR_DEFAULT);
+
+      /* Check if the module has been powered up... */
+      if(hasr_read(base) & HASR_NO_CLK)
+	{
+#ifdef DEBUG_CONFIG_ERRORS
+	  printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
+		 dev->name);
+#endif
+	  break;
+	}
+
+      /* initialize the modem */
+      if(wv_mmc_init(dev) == FALSE)
+	{
+#ifdef DEBUG_CONFIG_ERRORS
+	  printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
+		 dev->name);
+#endif
+	  break;
+	}
+
+      /* reset the LAN controller (i82593) */
+      outb(OP0_RESET, LCCR(base));
+      mdelay(1);	/* A bit crude ! */
+
+      /* Initialize the LAN controller */
+      if(wv_82593_config(dev) == FALSE)
+	{
+#ifdef DEBUG_CONFIG_ERRORS
+	  printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
+		 dev->name);
+#endif
+	  break;
+	}
+
+      /* Diagnostic */
+      if(wv_diag(dev) == FALSE)
+	{
+#ifdef DEBUG_CONFIG_ERRORS
+	  printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
+		 dev->name);
+#endif
+	  break;
+	}
+
+      /* 
+       * insert code for loopback test here
+       */
+
+      /* The device is now configured */
+      lp->configured = 1;
+      ret = TRUE;
+    }
+  while(0);
+
+  /* Re-enable interrupts */
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
+#endif
+  return(ret);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Totally reset the wavelan and restart it.
+ * Performs the following actions:
+ * 	1. Call wv_hw_config()
+ *	2. Start the LAN controller's receive unit
+ * (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
+ */
+static void
+wv_hw_reset(struct net_device *	dev)
+{
+  net_local *	lp = netdev_priv(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
+#endif
+
+  lp->nresets++;
+  lp->configured = 0;
+  
+  /* Call wv_hw_config() for most of the reset & init stuff */
+  if(wv_hw_config(dev) == FALSE)
+    return;
+
+  /* start receive unit */
+  wv_ru_start(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * wv_pcmcia_config() is called after a CARD_INSERTION event is
+ * received, to configure the PCMCIA socket, and to make the ethernet
+ * device available to the system.
+ * (called by wavelan_event())
+ */
+static int
+wv_pcmcia_config(struct pcmcia_device *	link)
+{
+  struct net_device *	dev = (struct net_device *) link->priv;
+  int			i;
+  win_req_t		req;
+  memreq_t		mem;
+  net_local *		lp = netdev_priv(dev);
+
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link);
+#endif
+
+  do
+    {
+      i = pcmcia_request_io(link, &link->io);
+      if (i != 0)
+	  break;
+
+      /*
+       * Now allocate an interrupt line.  Note that this does not
+       * actually assign a handler to the interrupt.
+       */
+      i = pcmcia_request_irq(link, &link->irq);
+      if (i != 0)
+	  break;
+
+      /*
+       * This actually configures the PCMCIA socket -- setting up
+       * the I/O windows and the interrupt mapping.
+       */
+      link->conf.ConfigIndex = 1;
+      i = pcmcia_request_configuration(link, &link->conf);
+      if (i != 0)
+	  break;
+
+      /*
+       * Allocate a small memory window.  Note that the struct pcmcia_device
+       * structure provides space for one window handle -- if your
+       * device needs several windows, you'll need to keep track of
+       * the handles in your private data structure, link->priv.
+       */
+      req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+      req.Base = req.Size = 0;
+      req.AccessSpeed = mem_speed;
+      i = pcmcia_request_window(link, &req, &link->win);
+      if (i != 0)
+	  break;
+
+      lp->mem = ioremap(req.Base, req.Size);
+      dev->mem_start = (u_long)lp->mem;
+      dev->mem_end = dev->mem_start + req.Size;
+
+      mem.CardOffset = 0; mem.Page = 0;
+      i = pcmcia_map_mem_page(link, link->win, &mem);
+      if (i != 0)
+	  break;
+
+      /* Feed device with this info... */
+      dev->irq = link->irq.AssignedIRQ;
+      dev->base_addr = link->io.BasePort1;
+      netif_start_queue(dev);
+
+#ifdef DEBUG_CONFIG_INFO
+      printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n",
+	     lp->mem, dev->irq, (u_int) dev->base_addr);
+#endif
+
+      SET_NETDEV_DEV(dev, &link->dev);
+      i = register_netdev(dev);
+      if(i != 0)
+	{
+#ifdef DEBUG_CONFIG_ERRORS
+	  printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n");
+#endif
+	  break;
+	}
+    }
+  while(0);		/* Humm... Disguised goto !!! */
+
+  /* If any step failed, release any partially configured state */
+  if(i != 0)
+    {
+      wv_pcmcia_release(link);
+      return FALSE;
+    }
+
+  strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name);
+  link->dev_node = &((net_local *) netdev_priv(dev))->node;
+
+#ifdef DEBUG_CONFIG_TRACE
+  printk(KERN_DEBUG "<-wv_pcmcia_config()\n");
+#endif
+  return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * After a card is removed, wv_pcmcia_release() will unregister the net
+ * device, and release the PCMCIA configuration.  If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+wv_pcmcia_release(struct pcmcia_device *link)
+{
+	struct net_device *	dev = (struct net_device *) link->priv;
+	net_local *		lp = netdev_priv(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+	printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link);
+#endif
+
+	iounmap(lp->mem);
+	pcmcia_disable_device(link);
+
+#ifdef DEBUG_CONFIG_TRACE
+	printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
+#endif
+}
+
+/************************ INTERRUPT HANDLING ************************/
+
+/*
+ * This function is the interrupt handler for the WaveLAN card. This
+ * routine will be called whenever: 
+ *	1. A packet is received.
+ *	2. A packet has successfully been transferred and the unit is
+ *	   ready to transmit another packet.
+ *	3. A command has completed execution.
+ */
+static irqreturn_t
+wavelan_interrupt(int		irq,
+		  void *	dev_id)
+{
+  struct net_device *	dev = dev_id;
+  net_local *	lp;
+  unsigned int	base;
+  int		status0;
+  u_int		tx_status;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
+#endif
+
+  lp = netdev_priv(dev);
+  base = dev->base_addr;
+
+#ifdef DEBUG_INTERRUPT_INFO
+  /* Check state of our spinlock (it should be cleared) */
+  if(spin_is_locked(&lp->spinlock))
+    printk(KERN_DEBUG
+	   "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
+	   dev->name);
+#endif
+
+  /* Prevent reentrancy. We need to do that because we may have
+   * multiple interrupt handler running concurently.
+   * It is safe because interrupts are disabled before aquiring
+   * the spinlock. */
+  spin_lock(&lp->spinlock);
+
+  /* Treat all pending interrupts */
+  while(1)
+    {
+      /* ---------------- INTERRUPT CHECKING ---------------- */
+      /*
+       * Look for the interrupt and verify the validity
+       */
+      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
+      status0 = inb(LCSR(base));
+
+#ifdef DEBUG_INTERRUPT_INFO
+      printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, 
+	     (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT);
+      if(status0&SR0_INTERRUPT)
+	{
+	  printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" :
+		 ((status0 & SR0_EXECUTION) ? "cmd" :
+		  ((status0 & SR0_RECEPTION) ? "recv" : "unknown")),
+		 (status0 & SR0_EVENT_MASK));
+	}
+      else
+	printk("\n");
+#endif
+
+      /* Return if no actual interrupt from i82593 (normal exit) */
+      if(!(status0 & SR0_INTERRUPT))
+	break;
+
+      /* If interrupt is both Rx and Tx or none...
+       * This code in fact is there to catch the spurious interrupt
+       * when you remove the wavelan pcmcia card from the socket */
+      if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) ||
+	 ((status0 & SR0_BOTH_RX_TX) == 0x0))
+	{
+#ifdef DEBUG_INTERRUPT_INFO
+	  printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n",
+		 dev->name, status0);
+#endif
+	  /* Acknowledge the interrupt */
+	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
+	  break;
+	}
+
+      /* ----------------- RECEIVING PACKET ----------------- */
+      /*
+       * When the wavelan signal the reception of a new packet,
+       * we call wv_packet_rcv() to copy if from the buffer and
+       * send it to NET3
+       */
+      if(status0 & SR0_RECEPTION)
+	{
+#ifdef DEBUG_INTERRUPT_INFO
+	  printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name);
+#endif
+
+	  if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT)
+	    {
+#ifdef DEBUG_INTERRUPT_ERROR
+	      printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n",
+		     dev->name);
+#endif
+	      dev->stats.rx_over_errors++;
+	      lp->overrunning = 1;
+      	    }
+
+	  /* Get the packet */
+	  wv_packet_rcv(dev);
+	  lp->overrunning = 0;
+
+	  /* Acknowledge the interrupt */
+	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
+	  continue;
+    	}
+
+      /* ---------------- COMMAND COMPLETION ---------------- */
+      /*
+       * Interrupts issued when the i82593 has completed a command.
+       * Most likely : transmission done
+       */
+
+      /* If a transmission has been done */
+      if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
+	 (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
+	 (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
+	{
+#ifdef DEBUG_TX_ERROR
+	  if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
+	    printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n",
+		   dev->name);
+#endif
+
+	  /* Get transmission status */
+	  tx_status = inb(LCSR(base));
+	  tx_status |= (inb(LCSR(base)) << 8);
+#ifdef DEBUG_INTERRUPT_INFO
+	  printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n",
+		 dev->name);
+	  {
+	    u_int	rcv_bytes;
+	    u_char	status3;
+	    rcv_bytes = inb(LCSR(base));
+	    rcv_bytes |= (inb(LCSR(base)) << 8);
+	    status3 = inb(LCSR(base));
+	    printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n",
+		   tx_status, rcv_bytes, (u_int) status3);
+	  }
+#endif
+	  /* Check for possible errors */
+	  if((tx_status & TX_OK) != TX_OK)
+	    {
+	      dev->stats.tx_errors++;
+
+	      if(tx_status & TX_FRTL)
+		{
+#ifdef DEBUG_TX_ERROR
+		  printk(KERN_INFO "%s: wv_interrupt(): frame too long\n",
+			 dev->name);
+#endif
+		}
+	      if(tx_status & TX_UND_RUN)
+		{
+#ifdef DEBUG_TX_FAIL
+		  printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n",
+			 dev->name);
+#endif
+		  dev->stats.tx_aborted_errors++;
+		}
+	      if(tx_status & TX_LOST_CTS)
+		{
+#ifdef DEBUG_TX_FAIL
+		  printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name);
+#endif
+		  dev->stats.tx_carrier_errors++;
+		}
+	      if(tx_status & TX_LOST_CRS)
+		{
+#ifdef DEBUG_TX_FAIL
+		  printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n",
+			 dev->name);
+#endif
+		  dev->stats.tx_carrier_errors++;
+		}
+	      if(tx_status & TX_HRT_BEAT)
+		{
+#ifdef DEBUG_TX_FAIL
+		  printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name);
+#endif
+		  dev->stats.tx_heartbeat_errors++;
+		}
+	      if(tx_status & TX_DEFER)
+		{
+#ifdef DEBUG_TX_FAIL
+		  printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n",
+			 dev->name);
+#endif
+		}
+	      /* Ignore late collisions since they're more likely to happen
+	       * here (the WaveLAN design prevents the LAN controller from
+	       * receiving while it is transmitting). We take action only when
+	       * the maximum retransmit attempts is exceeded.
+	       */
+	      if(tx_status & TX_COLL)
+		{
+		  if(tx_status & TX_MAX_COL)
+		    {
+#ifdef DEBUG_TX_FAIL
+		      printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n",
+			     dev->name);
+#endif
+		      if(!(tx_status & TX_NCOL_MASK))
+			{
+			  dev->stats.collisions += 0x10;
+			}
+		    }
+		}
+	    }	/* if(!(tx_status & TX_OK)) */
+
+	  dev->stats.collisions += (tx_status & TX_NCOL_MASK);
+	  dev->stats.tx_packets++;
+
+	  netif_wake_queue(dev);
+	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));	/* Acknowledge the interrupt */
+    	} 
+      else	/* if interrupt = transmit done or retransmit done */
+	{
+#ifdef DEBUG_INTERRUPT_ERROR
+	  printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n",
+		 status0);
+#endif
+	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));	/* Acknowledge the interrupt */
+    	}
+    }	/* while(1) */
+
+  spin_unlock(&lp->spinlock);
+
+#ifdef DEBUG_INTERRUPT_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
+#endif
+
+  /* We always return IRQ_HANDLED, because we will receive empty
+   * interrupts under normal operations. Anyway, it doesn't matter
+   * as we are dealing with an ISA interrupt that can't be shared.
+   *
+   * Explanation : under heavy receive, the following happens :
+   * ->wavelan_interrupt()
+   *    (status0 & SR0_INTERRUPT) != 0
+   *       ->wv_packet_rcv()
+   *    (status0 & SR0_INTERRUPT) != 0
+   *       ->wv_packet_rcv()
+   *    (status0 & SR0_INTERRUPT) == 0	// i.e. no more event
+   * <-wavelan_interrupt()
+   * ->wavelan_interrupt()
+   *    (status0 & SR0_INTERRUPT) == 0	// i.e. empty interrupt
+   * <-wavelan_interrupt()
+   * Jean II */
+  return IRQ_HANDLED;
+} /* wv_interrupt */
+
+/*------------------------------------------------------------------*/
+/*
+ * Watchdog: when we start a transmission, a timer is set for us in the
+ * kernel.  If the transmission completes, this timer is disabled. If
+ * the timer expires, we are called and we try to unlock the hardware.
+ *
+ * Note : This watchdog is move clever than the one in the ISA driver,
+ * because it try to abort the current command before reseting
+ * everything...
+ * On the other hand, it's a bit simpler, because we don't have to
+ * deal with the multiple Tx buffers...
+ */
+static void
+wavelan_watchdog(struct net_device *	dev)
+{
+  net_local *		lp = netdev_priv(dev);
+  unsigned int		base = dev->base_addr;
+  unsigned long		flags;
+  int			aborted = FALSE;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
+#endif
+
+#ifdef DEBUG_INTERRUPT_ERROR
+  printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
+	 dev->name);
+#endif
+
+  spin_lock_irqsave(&lp->spinlock, flags);
+
+  /* Ask to abort the current command */
+  outb(OP0_ABORT, LCCR(base));
+
+  /* Wait for the end of the command (a bit hackish) */
+  if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
+		  OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
+    aborted = TRUE;
+
+  /* Release spinlock here so that wv_hw_reset() can grab it */
+  spin_unlock_irqrestore(&lp->spinlock, flags);
+
+  /* Check if we were successful in aborting it */
+  if(!aborted)
+    {
+      /* It seem that it wasn't enough */
+#ifdef DEBUG_INTERRUPT_ERROR
+      printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n",
+	     dev->name);
+#endif
+      wv_hw_reset(dev);
+    }
+
+#ifdef DEBUG_PSA_SHOW
+  {
+    psa_t		psa;
+    psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+    wv_psa_show(&psa);
+  }
+#endif
+#ifdef DEBUG_MMC_SHOW
+  wv_mmc_show(dev);
+#endif
+#ifdef DEBUG_I82593_SHOW
+  wv_ru_show(dev);
+#endif
+
+  /* We are no more waiting for something... */
+  netif_wake_queue(dev);
+
+#ifdef DEBUG_INTERRUPT_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
+#endif
+}
+
+/********************* CONFIGURATION CALLBACKS *********************/
+/*
+ * Here are the functions called by the pcmcia package (cardmgr) and
+ * linux networking (NET3) for initialization, configuration and
+ * deinstallations of the Wavelan Pcmcia Hardware.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Configure and start up the WaveLAN PCMCIA adaptor.
+ * Called by NET3 when it "open" the device.
+ */
+static int
+wavelan_open(struct net_device *	dev)
+{
+  net_local *	lp = netdev_priv(dev);
+  struct pcmcia_device *	link = lp->link;
+  unsigned int	base = dev->base_addr;
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
+	 (unsigned int) dev);
+#endif
+
+  /* Check if the modem is powered up (wavelan_close() power it down */
+  if(hasr_read(base) & HASR_NO_CLK)
+    {
+      /* Power up (power up time is 250us) */
+      hacr_write(base, HACR_DEFAULT);
+
+      /* Check if the module has been powered up... */
+      if(hasr_read(base) & HASR_NO_CLK)
+	{
+#ifdef DEBUG_CONFIG_ERRORS
+	  printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n",
+		 dev->name);
+#endif
+	  return FALSE;
+	}
+    }
+
+  /* Start reception and declare the driver ready */
+  if(!lp->configured)
+    return FALSE;
+  if(!wv_ru_start(dev))
+    wv_hw_reset(dev);		/* If problem : reset */
+  netif_start_queue(dev);
+
+  /* Mark the device as used */
+  link->open++;
+
+#ifdef WAVELAN_ROAMING
+  if(do_roaming)
+    wv_roam_init(dev);
+#endif	/* WAVELAN_ROAMING */
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
+#endif
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Shutdown the WaveLAN PCMCIA adaptor.
+ * Called by NET3 when it "close" the device.
+ */
+static int
+wavelan_close(struct net_device *	dev)
+{
+  struct pcmcia_device *	link = ((net_local *)netdev_priv(dev))->link;
+  unsigned int	base = dev->base_addr;
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
+	 (unsigned int) dev);
+#endif
+
+  /* If the device isn't open, then nothing to do */
+  if(!link->open)
+    {
+#ifdef DEBUG_CONFIG_INFO
+      printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name);
+#endif
+      return 0;
+    }
+
+#ifdef WAVELAN_ROAMING
+  /* Cleanup of roaming stuff... */
+  if(do_roaming)
+    wv_roam_cleanup(dev);
+#endif	/* WAVELAN_ROAMING */
+
+  link->open--;
+
+  /* If the card is still present */
+  if(netif_running(dev))
+    {
+      netif_stop_queue(dev);
+
+      /* Stop receiving new messages and wait end of transmission */
+      wv_ru_stop(dev);
+
+      /* Power down the module */
+      hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT));
+    }
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
+#endif
+  return 0;
+}
+
+static const struct net_device_ops wavelan_netdev_ops = {
+	.ndo_open 		= wavelan_open,
+	.ndo_stop		= wavelan_close,
+	.ndo_start_xmit		= wavelan_packet_xmit,
+	.ndo_set_multicast_list = wavelan_set_multicast_list,
+#ifdef SET_MAC_ADDRESS
+	.ndo_set_mac_address	= wavelan_set_mac_address,
+#endif
+	.ndo_tx_timeout		= wavelan_watchdog,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/*------------------------------------------------------------------*/
+/*
+ * wavelan_attach() creates an "instance" of the driver, allocating
+ * local data structures for one device (one interface).  The device
+ * is registered with Card Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a
+ * card insertion event.
+ */
+static int
+wavelan_probe(struct pcmcia_device *p_dev)
+{
+  struct net_device *	dev;		/* Interface generic data */
+  net_local *	lp;		/* Interface specific data */
+  int ret;
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "-> wavelan_attach()\n");
+#endif
+
+  /* The io structure describes IO port mapping */
+  p_dev->io.NumPorts1 = 8;
+  p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+  p_dev->io.IOAddrLines = 3;
+
+  /* Interrupt setup */
+  p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+  p_dev->irq.Handler = wavelan_interrupt;
+
+  /* General socket configuration */
+  p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+  p_dev->conf.IntType = INT_MEMORY_AND_IO;
+
+  /* Allocate the generic data structure */
+  dev = alloc_etherdev(sizeof(net_local));
+  if (!dev)
+      return -ENOMEM;
+
+  p_dev->priv = dev;
+
+  lp = netdev_priv(dev);
+
+  /* Init specific data */
+  lp->configured = 0;
+  lp->reconfig_82593 = FALSE;
+  lp->nresets = 0;
+  /* Multicast stuff */
+  lp->promiscuous = 0;
+  lp->allmulticast = 0;
+  lp->mc_count = 0;
+
+  /* Init spinlock */
+  spin_lock_init(&lp->spinlock);
+
+  /* back links */
+  lp->dev = dev;
+
+  /* wavelan NET3 callbacks */
+  dev->netdev_ops = &wavelan_netdev_ops;
+  dev->watchdog_timeo	= WATCHDOG_JIFFIES;
+  SET_ETHTOOL_OPS(dev, &ops);
+
+  dev->wireless_handlers = &wavelan_handler_def;
+  lp->wireless_data.spy_data = &lp->spy_data;
+  dev->wireless_data = &lp->wireless_data;
+
+  /* Other specific data */
+  dev->mtu = WAVELAN_MTU;
+
+  ret = wv_pcmcia_config(p_dev);
+  if (ret)
+	  return ret;
+
+  ret = wv_hw_config(dev);
+  if (ret) {
+	  dev->irq = 0;
+	  pcmcia_disable_device(p_dev);
+	  return ret;
+  }
+
+  wv_init_info(dev);
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "<- wavelan_attach()\n");
+#endif
+
+  return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This deletes a driver "instance".  The device is de-registered with
+ * Card Services.  If it has been released, all local data structures
+ * are freed.  Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void
+wavelan_detach(struct pcmcia_device *link)
+{
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
+#endif
+
+  /* Some others haven't done their job : give them another chance */
+  wv_pcmcia_release(link);
+
+  /* Free pieces */
+  if(link->priv)
+    {
+      struct net_device *	dev = (struct net_device *) link->priv;
+
+      /* Remove ourselves from the kernel list of ethernet devices */
+      /* Warning : can't be called from interrupt, timer or wavelan_close() */
+      if (link->dev_node)
+	unregister_netdev(dev);
+      link->dev_node = NULL;
+      ((net_local *)netdev_priv(dev))->link = NULL;
+      ((net_local *)netdev_priv(dev))->dev = NULL;
+      free_netdev(dev);
+    }
+
+#ifdef DEBUG_CALLBACK_TRACE
+  printk(KERN_DEBUG "<- wavelan_detach()\n");
+#endif
+}
+
+static int wavelan_suspend(struct pcmcia_device *link)
+{
+	struct net_device *	dev = (struct net_device *) link->priv;
+
+	/* NB: wavelan_close will be called, but too late, so we are
+	 * obliged to close nicely the wavelan here. David, could you
+	 * close the device before suspending them ? And, by the way,
+	 * could you, on resume, add a "route add -net ..." after the
+	 * ifconfig up ? Thanks... */
+
+	/* Stop receiving new messages and wait end of transmission */
+	wv_ru_stop(dev);
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	/* Power down the module */
+	hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
+
+	return 0;
+}
+
+static int wavelan_resume(struct pcmcia_device *link)
+{
+	struct net_device *	dev = (struct net_device *) link->priv;
+
+	if (link->open) {
+		wv_hw_reset(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+
+static struct pcmcia_device_id wavelan_ids[] = {
+	PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
+	PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
+	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975),
+	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, wavelan_ids);
+
+static struct pcmcia_driver wavelan_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= "wavelan_cs",
+	},
+	.probe		= wavelan_probe,
+	.remove		= wavelan_detach,
+	.id_table       = wavelan_ids,
+	.suspend	= wavelan_suspend,
+	.resume		= wavelan_resume,
+};
+
+static int __init
+init_wavelan_cs(void)
+{
+	return pcmcia_register_driver(&wavelan_driver);
+}
+
+static void __exit
+exit_wavelan_cs(void)
+{
+	pcmcia_unregister_driver(&wavelan_driver);
+}
+
+module_init(init_wavelan_cs);
+module_exit(exit_wavelan_cs);
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/staging/wavelan/wavelan_cs.h
similarity index 100%
rename from drivers/net/wireless/wavelan_cs.h
rename to drivers/staging/wavelan/wavelan_cs.h
diff --git a/drivers/staging/wavelan/wavelan_cs.p.h b/drivers/staging/wavelan/wavelan_cs.p.h
new file mode 100644
index 0000000..8fbfaa8
--- /dev/null
+++ b/drivers/staging/wavelan/wavelan_cs.p.h
@@ -0,0 +1,766 @@
+/*
+ *	Wavelan Pcmcia driver
+ *
+ *		Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ *
+ * This file contain all definition and declarations necessary for the
+ * wavelan pcmcia driver. This file is a private header, so it should
+ * be included only on wavelan_cs.c !!!
+ */
+
+#ifndef WAVELAN_CS_P_H
+#define WAVELAN_CS_P_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * This driver provide a Linux interface to the Wavelan Pcmcia hardware
+ * The Wavelan is a product of Lucent (http://www.wavelan.com/).
+ * This division was formerly part of NCR and then AT&T.
+ * Wavelan are also distributed by DEC (RoamAbout DS)...
+ *
+ * To know how to use this driver, read the PCMCIA HOWTO.
+ * If you want to exploit the many other fonctionalities, look comments
+ * in the code...
+ *
+ * This driver is the result of the effort of many peoples (see below).
+ */
+
+/* ------------------------ SPECIFIC NOTES ------------------------ */
+/*
+ * Web page
+ * --------
+ *	I try to maintain a web page with the Wireless LAN Howto at :
+ *	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
+ *
+ * SMP
+ * ---
+ *	We now are SMP compliant (I eventually fixed the remaining bugs).
+ *	The driver has been tested on a dual P6-150 and survived my usual
+ *	set of torture tests.
+ *	Anyway, I spent enough time chasing interrupt re-entrancy during
+ *	errors or reconfigure, and I designed the locked/unlocked sections
+ *	of the driver with great care, and with the recent addition of
+ *	the spinlock (thanks to the new API), we should be quite close to
+ *	the truth.
+ *	The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
+ *	but better safe than sorry (especially at 2 Mb/s ;-).
+ *
+ *	I have also looked into disabling only our interrupt on the card
+ *	(via HACR) instead of all interrupts in the processor (via cli),
+ *	so that other driver are not impacted, and it look like it's
+ *	possible, but it's very tricky to do right (full of races). As
+ *	the gain would be mostly for SMP systems, it can wait...
+ *
+ * Debugging and options
+ * ---------------------
+ *	You will find below a set of '#define" allowing a very fine control
+ *	on the driver behaviour and the debug messages printed.
+ *	The main options are :
+ *	o WAVELAN_ROAMING, for the experimental roaming support.
+ *	o SET_PSA_CRC, to have your card correctly recognised by
+ *	  an access point and the Point-to-Point diagnostic tool.
+ *	o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
+ *	  (otherwise we always start afresh with some defaults)
+ *
+ * wavelan_cs.o is darn too big
+ * -------------------------
+ *	That's true ! There is a very simple way to reduce the driver
+ *	object by 33% (yes !). Comment out the following line :
+ *		#include <linux/wireless.h>
+ *	Other compile options can also reduce the size of it...
+ *
+ * MAC address and hardware detection :
+ * ----------------------------------
+ *	The detection code of the wavelan chech that the first 3
+ *	octets of the MAC address fit the company code. This type of
+ *	detection work well for AT&T cards (because the AT&T code is
+ *	hardcoded in wavelan_cs.h), but of course will fail for other
+ *	manufacturer.
+ *
+ *	If you are sure that your card is derived from the wavelan,
+ *	here is the way to configure it :
+ *	1) Get your MAC address
+ *		a) With your card utilities (wfreqsel, instconf, ...)
+ *		b) With the driver :
+ *			o compile the kernel with DEBUG_CONFIG_INFO enabled
+ *			o Boot and look the card messages
+ *	2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h)
+ *	3) Compile & verify
+ *	4) Send me the MAC code - I will include it in the next version...
+ *
+ */
+
+/* --------------------- WIRELESS EXTENSIONS --------------------- */
+/*
+ * This driver is the first one to support "wireless extensions".
+ * This set of extensions provide you some way to control the wireless
+ * caracteristics of the hardware in a standard way and support for
+ * applications for taking advantage of it (like Mobile IP).
+ *
+ * It might be a good idea as well to fetch the wireless tools to
+ * configure the device and play a bit.
+ */
+
+/* ---------------------------- FILES ---------------------------- */
+/*
+ * wavelan_cs.c :	The actual code for the driver - C functions
+ *
+ * wavelan_cs.p.h :	Private header : local types / vars for the driver
+ *
+ * wavelan_cs.h :	Description of the hardware interface & structs
+ *
+ * i82593.h :		Description if the Ethernet controller
+ */
+
+/* --------------------------- HISTORY --------------------------- */
+/*
+ * The history of the Wavelan drivers is as complicated as history of
+ * the Wavelan itself (NCR -> AT&T -> Lucent).
+ *
+ * All started with Anders Klemets <klemets@paul.rutgers.edu>,
+ * writing a Wavelan ISA driver for the MACH microkernel. Girish
+ * Welling <welling@paul.rutgers.edu> had also worked on it.
+ * Keith Moore modify this for the Pcmcia hardware.
+ * 
+ * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
+ * and add specific Pcmcia support (there is currently no equivalent
+ * of the PCMCIA package under BSD...).
+ *
+ * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
+ *
+ * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
+ *
+ * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
+ * (with help of the BSDI PCMCIA driver) for PCMCIA.
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
+ * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
+ * correctly 2.00 cards (2.4 GHz with frequency selection).
+ * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
+ * Pcmcia package (+ bug corrections).
+ *
+ * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
+ * patchs to the Pcmcia driver. After, I added code in the ISA driver
+ * for Wireless Extensions and full support of frequency selection
+ * cards. Now, I'm doing the same to the Pcmcia driver + some
+ * reorganisation.
+ * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
+ * much needed informations on the Wavelan hardware.
+ */
+
+/* By the way : for the copyright & legal stuff :
+ * Almost everybody wrote code under GNU or BSD license (or alike),
+ * and want that their original copyright remain somewhere in the
+ * code (for myself, I go with the GPL).
+ * Nobody want to take responsibility for anything, except the fame...
+ */
+
+/* --------------------------- CREDITS --------------------------- */
+/*
+ * Credits:
+ *    Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
+ *	Loeke Brederveld of Lucent for providing extremely useful
+ *	information about WaveLAN PCMCIA hardware
+ *
+ *    This driver is based upon several other drivers, in particular:
+ *	David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
+ *	Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
+ *	Anders Klemets' PCMCIA WaveLAN adapter driver
+ *	Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
+ *
+ * Additional Credits:
+ *
+ *    This software was originally developed under Linux 1.2.3
+ *	(Slackware 2.0 distribution).
+ *    And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+)
+ *	with an HP OmniBook 4000 and then a 5500.
+ *
+ *    It is based on other device drivers and information either written
+ *    or supplied by:
+ *	James Ashton (jaa101@syseng.anu.edu.au),
+ *	Ajay Bakre (bakre@paul.rutgers.edu),
+ *	Donald Becker (becker@super.org),
+ *	Jim Binkley <jrb@cs.pdx.edu>,
+ *	Loeke Brederveld <lbrederv@wavelan.com>,
+ *	Allan Creighton (allanc@cs.su.oz.au),
+ *	Brent Elphick <belphick@uwaterloo.ca>,
+ *	Joe Finney <joe@comp.lancs.ac.uk>,
+ *	Matthew Geier (matthew@cs.su.oz.au),
+ *	Remo di Giovanni (remo@cs.su.oz.au),
+ *	Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
+ *	David Hinds <dahinds@users.sourceforge.net>,
+ *	Jan Hoogendoorn (c/o marteijn@lucent.com),
+ *      Bruce Janson <bruce@cs.usyd.edu.au>,
+ *	Anthony D. Joseph <adj@lcs.mit.edu>,
+ *	Anders Klemets (klemets@paul.rutgers.edu),
+ *	Yunzhou Li <yunzhou@strat.iol.unh.edu>,
+ *	Marc Meertens (mmeertens@lucent.com),
+ *	Keith Moore,
+ *	Robert Morris (rtm@das.harvard.edu),
+ *	Ian Parkin (ian@cs.su.oz.au),
+ *	John Rosenberg (johnr@cs.su.oz.au),
+ *	George Rossi (george@phm.gov.au),
+ *	Arthur Scott (arthur@cs.su.oz.au),
+ *	Stanislav Sinyagin <stas@isf.ru>
+ *	Peter Storey,
+ *	Jean Tourrilhes <jt@hpl.hp.com>,
+ *	Girish Welling (welling@paul.rutgers.edu)
+ *	Clark Woodworth <clark@hiway1.exit109.com>
+ *	Yongguang Zhang <ygz@isl.hrl.hac.com>...
+ */
+
+/* ------------------------- IMPROVEMENTS ------------------------- */
+/*
+ * I proudly present :
+ *
+ * Changes made in 2.8.22 :
+ * ----------------------
+ *	- improved wv_set_multicast_list
+ *	- catch spurious interrupt
+ *	- correct release of the device
+ *
+ * Changes mades in release :
+ * ------------------------
+ *	- Reorganisation of the code, function name change
+ *	- Creation of private header (wavelan_cs.h)
+ *	- Reorganised debug messages
+ *	- More comments, history, ...
+ *	- Configure earlier (in "insert" instead of "open")
+ *        and do things only once
+ *	- mmc_init : configure the PSA if not done
+ *	- mmc_init : 2.00 detection better code for 2.00 init
+ *	- better info at startup
+ *	- Correct a HUGE bug (volatile & uncalibrated busy loop)
+ *	  in wv_82593_cmd => config speedup
+ *	- Stop receiving & power down on close (and power up on open)
+ *	  use "ifconfig down" & "ifconfig up ; route add -net ..."
+ *	- Send packets : add watchdog instead of pooling
+ *	- Receive : check frame wrap around & try to recover some frames
+ *	- wavelan_set_multicast_list : avoid reset
+ *	- add wireless extensions (ioctl & get_wireless_stats)
+ *	  get/set nwid/frequency on fly, info for /proc/net/wireless
+ *	- Suppress useless stuff from lp (net_local), but add link
+ *	- More inlines
+ *	- Lot of others minor details & cleanups
+ *
+ * Changes made in second release :
+ * ------------------------------
+ *	- Optimise wv_85893_reconfig stuff, fix potential problems
+ *	- Change error values for ioctl
+ *	- Non blocking wv_ru_stop() + call wv_reset() in case of problems
+ *	- Remove development printk from wavelan_watchdog()
+ *	- Remove of the watchdog to wavelan_close instead of wavelan_release
+ *	  fix potential problems...
+ *	- Start debugging suspend stuff (but it's still a bit weird)
+ *	- Debug & optimize dump header/packet in Rx & Tx (debug)
+ *	- Use "readb" and "writeb" to be kernel 2.1 compliant
+ *	- Better handling of bogus interrupts
+ *	- Wireless extension : SETSPY and GETSPY
+ *	- Remove old stuff (stats - for those needing it, just ask me...)
+ *	- Make wireless extensions optional
+ *
+ * Changes made in third release :
+ * -----------------------------
+ *	- cleanups & typos
+ *	- modif wireless ext (spy -> only one pointer)
+ *	- new private ioctl to set/get quality & level threshold
+ *	- Init : correct default value of level threshold for pcmcia
+ *	- kill watchdog in hw_reset
+ *	- more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
+ *	- Add message level (debug stuff in /var/adm/debug & errors not
+ *	  displayed at console and still in /var/adm/messages)
+ *
+ * Changes made in fourth release :
+ * ------------------------------
+ *	- multicast support (yes !) thanks to Yongguang Zhang.
+ *
+ * Changes made in fifth release (2.9.0) :
+ * -------------------------------------
+ *	- Revisited multicast code (it was mostly wrong).
+ *	- protect code in wv_82593_reconfig with dev->tbusy (oups !)
+ *
+ * Changes made in sixth release (2.9.1a) :
+ * --------------------------------------
+ *	- Change the detection code for multi manufacturer code support
+ *	- Correct bug (hang kernel) in init when we were "rejecting" a card 
+ *
+ * Changes made in seventh release (2.9.1b) :
+ * ----------------------------------------
+ *	- Update to wireless extensions changes
+ *	- Silly bug in card initial configuration (psa_conf_status)
+ *
+ * Changes made in eigth release :
+ * -----------------------------
+ *	- Small bug in debug code (probably not the last one...)
+ *	- 1.2.13 support (thanks to Clark Woodworth)
+ *
+ * Changes made for release in 2.9.2b :
+ * ----------------------------------
+ *	- Level threshold is now a standard wireless extension (version 4 !)
+ *	- modules parameters types for kernel > 2.1.17
+ *	- updated man page
+ *	- Others cleanup from David Hinds
+ *
+ * Changes made for release in 2.9.5 :
+ * ---------------------------------
+ *	- byte count stats (courtesy of David Hinds)
+ *	- Remove dev_tint stuff (courtesy of David Hinds)
+ *	- Others cleanup from David Hinds
+ *	- Encryption setting from Brent Elphick (thanks a lot !)
+ *	- 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
+ *
+ * Changes made for release in 2.9.6 :
+ * ---------------------------------
+ *	- fix bug : no longuer disable watchdog in case of bogus interrupt
+ *	- increase timeout in config code for picky hardware
+ *	- mask unused bits in status (Wireless Extensions)
+ *
+ * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
+ * -----------------------------------------------------------------
+ *	- Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
+ *	- PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
+ *	- Better initialisation of the i82593 controller
+ *	  from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
+ *
+ * Changes made for release in 3.0.10 :
+ * ----------------------------------
+ *	- Fix eject "hang" of the driver under 2.2.X :
+ *		o create wv_flush_stale_links()
+ *		o Rename wavelan_release to wv_pcmcia_release & move up
+ *		o move unregister_netdev to wavelan_detach()
+ *		o wavelan_release() no longer call wavelan_detach()
+ *		o Suppress "release" timer
+ *		o Other cleanups & fixes
+ *	- New MAC address in the probe
+ *	- Reorg PSA_CRC code (endian neutral & cleaner)
+ *	- Correct initialisation of the i82593 from Lucent manual
+ *	- Put back the watchdog, with larger timeout
+ *	- TRANSMIT_NO_CRC is a "normal" error, so recover from it
+ *	  from Derrick J Brashear <shadow@dementia.org>
+ *	- Better handling of TX and RX normal failure conditions
+ *	- #ifdef out all the roaming code
+ *	- Add ESSID & "AP current address" ioctl stubs
+ *	- General cleanup of the code
+ *
+ * Changes made for release in 3.0.13 :
+ * ----------------------------------
+ *	- Re-enable compilation of roaming code by default, but with
+ *	  do_roaming = 0
+ *	- Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
+ *	  at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
+ *	- Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
+ *
+ * Changes made for release in 3.0.15 :
+ * ----------------------------------
+ *	- Change e-mail and web page addresses
+ *	- Watchdog timer is now correctly expressed in HZ, not in jiffies
+ *	- Add channel number to the list of frequencies in range
+ *	- Add the (short) list of bit-rates in range
+ *	- Developp a new sensitivity... (sens.value & sens.fixed)
+ *
+ * Changes made for release in 3.1.2 :
+ * ---------------------------------
+ *	- Fix check for root permission (break instead of exit)
+ *	- New nwid & encoding setting (Wireless Extension 9)
+ *
+ * Changes made for release in 3.1.12 :
+ * ----------------------------------
+ *	- reworked wv_82593_cmd to avoid using the IRQ handler and doing
+ *	  ugly things with interrupts.
+ *	- Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
+ *	- Update to new network API (softnet - 2.3.43) :
+ *		o replace dev->tbusy (David + me)
+ *		o replace dev->tstart (David + me)
+ *		o remove dev->interrupt (David)
+ *		o add SMP locking via spinlock in splxx (me)
+ *		o add spinlock in interrupt handler (me)
+ *		o use kernel watchdog instead of ours (me)
+ *		o verify that all the changes make sense and work (me)
+ *	- Re-sync kernel/pcmcia versions (not much actually)
+ *	- A few other cleanups (David & me)...
+ *
+ * Changes made for release in 3.1.22 :
+ * ----------------------------------
+ *	- Check that SMP works, remove annoying log message
+ *
+ * Changes made for release in 3.1.24 :
+ * ----------------------------------
+ *	- Fix unfrequent card lockup when watchdog was reseting the hardware :
+ *		o control first busy loop in wv_82593_cmd()
+ *		o Extend spinlock protection in wv_hw_config()
+ *
+ * Changes made for release in 3.1.33 :
+ * ----------------------------------
+ *	- Optional use new driver API for Wireless Extensions :
+ *		o got rid of wavelan_ioctl()
+ *		o use a bunch of iw_handler instead
+ *
+ * Changes made for release in 3.2.1 :
+ * ---------------------------------
+ *	- Set dev->trans_start to avoid filling the logs
+ *		(and generating useless abort commands)
+ *	- Avoid deadlocks in mmc_out()/mmc_in()
+ *
+ * Wishes & dreams:
+ * ----------------
+ *	- Cleanup and integrate the roaming code
+ *	  (std debug, set DomainID, decay avg and co...)
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* Linux headers that we need */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/ethtool.h>
+#include <linux/wireless.h>		/* Wireless extensions */
+#include <net/iw_handler.h>		/* New driver API */
+
+/* Pcmcia headers that we need */
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+/* Wavelan declarations */
+#include <linux/i82593.h>	/* Definitions for the Intel chip */
+
+#include "wavelan_cs.h"	/* Others bits of the hardware */
+
+/************************** DRIVER OPTIONS **************************/
+/*
+ * `#define' or `#undef' the following constant to change the behaviour
+ * of the driver...
+ */
+#define WAVELAN_ROAMING		/* Include experimental roaming code */
+#undef WAVELAN_ROAMING_EXT	/* Enable roaming wireless extensions */
+#undef SET_PSA_CRC		/* Set the CRC in PSA (slower) */
+#define USE_PSA_CONFIG		/* Use info from the PSA */
+#undef EEPROM_IS_PROTECTED	/* Doesn't seem to be necessary */
+#define MULTICAST_AVOID		/* Avoid extra multicast (I'm sceptical) */
+#undef SET_MAC_ADDRESS		/* Experimental */
+
+/* Warning : these stuff will slow down the driver... */
+#define WIRELESS_SPY		/* Enable spying addresses */
+#undef HISTOGRAM		/* Enable histogram of sig level... */
+
+/****************************** DEBUG ******************************/
+
+#undef DEBUG_MODULE_TRACE	/* Module insertion/removal */
+#undef DEBUG_CALLBACK_TRACE	/* Calls made by Linux */
+#undef DEBUG_INTERRUPT_TRACE	/* Calls to handler */
+#undef DEBUG_INTERRUPT_INFO	/* type of interrupt & so on */
+#define DEBUG_INTERRUPT_ERROR	/* problems */
+#undef DEBUG_CONFIG_TRACE	/* Trace the config functions */
+#undef DEBUG_CONFIG_INFO	/* What's going on... */
+#define DEBUG_CONFIG_ERRORS	/* Errors on configuration */
+#undef DEBUG_TX_TRACE		/* Transmission calls */
+#undef DEBUG_TX_INFO		/* Header of the transmitted packet */
+#undef DEBUG_TX_FAIL		/* Normal failure conditions */
+#define DEBUG_TX_ERROR		/* Unexpected conditions */
+#undef DEBUG_RX_TRACE		/* Transmission calls */
+#undef DEBUG_RX_INFO		/* Header of the transmitted packet */
+#undef DEBUG_RX_FAIL		/* Normal failure conditions */
+#define DEBUG_RX_ERROR		/* Unexpected conditions */
+#undef DEBUG_PACKET_DUMP	/* Dump packet on the screen */
+#undef DEBUG_IOCTL_TRACE	/* Misc call by Linux */
+#undef DEBUG_IOCTL_INFO		/* Various debug info */
+#define DEBUG_IOCTL_ERROR	/* What's going wrong */
+#define DEBUG_BASIC_SHOW	/* Show basic startup info */
+#undef DEBUG_VERSION_SHOW	/* Print version info */
+#undef DEBUG_PSA_SHOW		/* Dump psa to screen */
+#undef DEBUG_MMC_SHOW		/* Dump mmc to screen */
+#undef DEBUG_SHOW_UNUSED	/* Show also unused fields */
+#undef DEBUG_I82593_SHOW	/* Show i82593 status */
+#undef DEBUG_DEVICE_SHOW	/* Show device parameters */
+
+/************************ CONSTANTS & MACROS ************************/
+
+#ifdef DEBUG_VERSION_SHOW
+static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n";
+#endif
+
+/* Watchdog temporisation */
+#define	WATCHDOG_JIFFIES	(256*HZ/100)
+
+/* Fix a bug in some old wireless extension definitions */
+#ifndef IW_ESSID_MAX_SIZE
+#define IW_ESSID_MAX_SIZE	32
+#endif
+
+/* ------------------------ PRIVATE IOCTL ------------------------ */
+
+#define SIOCSIPQTHR	SIOCIWFIRSTPRIV		/* Set quality threshold */
+#define SIOCGIPQTHR	SIOCIWFIRSTPRIV + 1	/* Get quality threshold */
+#define SIOCSIPROAM     SIOCIWFIRSTPRIV + 2	/* Set roaming state */
+#define SIOCGIPROAM     SIOCIWFIRSTPRIV + 3	/* Get roaming state */
+
+#define SIOCSIPHISTO	SIOCIWFIRSTPRIV + 4	/* Set histogram ranges */
+#define SIOCGIPHISTO	SIOCIWFIRSTPRIV + 5	/* Get histogram values */
+
+/*************************** WaveLAN Roaming  **************************/
+#ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */
+
+#define WAVELAN_ROAMING_DEBUG	 0	/* 1 = Trace of handover decisions */
+					/* 2 = Info on each beacon rcvd... */
+#define MAX_WAVEPOINTS		7	/* Max visible at one time */
+#define WAVEPOINT_HISTORY	5	/* SNR sample history slow search */
+#define WAVEPOINT_FAST_HISTORY	2	/* SNR sample history fast search */
+#define SEARCH_THRESH_LOW	10	/* SNR to enter cell search */
+#define SEARCH_THRESH_HIGH	13	/* SNR to leave cell search */
+#define WAVELAN_ROAMING_DELTA	1	/* Hysteresis value (+/- SNR) */
+#define CELL_TIMEOUT		2*HZ	/* in jiffies */
+
+#define FAST_CELL_SEARCH	1	/* Boolean values... */
+#define NWID_PROMISC		1	/* for code clarity. */
+
+typedef struct wavepoint_beacon
+{
+  unsigned char		dsap,		/* Unused */
+			ssap,		/* Unused */
+			ctrl,		/* Unused */
+			O,U,I,		/* Unused */
+			spec_id1,	/* Unused */
+			spec_id2,	/* Unused */
+			pdu_type,	/* Unused */
+			seq;		/* WavePoint beacon sequence number */
+  __be16		domain_id,	/* WavePoint Domain ID */
+			nwid;		/* WavePoint NWID */
+} wavepoint_beacon;
+
+typedef struct wavepoint_history
+{
+  unsigned short	nwid;		/* WavePoint's NWID */
+  int			average_slow;	/* SNR running average */
+  int			average_fast;	/* SNR running average */
+  unsigned char	  sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
+  unsigned char		qualptr;	/* Index into ringbuffer */
+  unsigned char		last_seq;	/* Last seq. no seen for WavePoint */
+  struct wavepoint_history *next;	/* Next WavePoint in table */
+  struct wavepoint_history *prev;	/* Previous WavePoint in table */
+  unsigned long		last_seen;	/* Time of last beacon recvd, jiffies */
+} wavepoint_history;
+
+struct wavepoint_table
+{
+  wavepoint_history	*head;		/* Start of ringbuffer */
+  int			num_wavepoints;	/* No. of WavePoints visible */
+  unsigned char		locked;		/* Table lock */
+};
+
+#endif	/* WAVELAN_ROAMING */
+
+/****************************** TYPES ******************************/
+
+/* Shortcuts */
+typedef struct iw_statistics	iw_stats;
+typedef struct iw_quality	iw_qual;
+typedef struct iw_freq		iw_freq;
+typedef struct net_local	net_local;
+typedef struct timer_list	timer_list;
+
+/* Basic types */
+typedef u_char		mac_addr[WAVELAN_ADDR_SIZE];	/* Hardware address */
+
+/*
+ * Static specific data for the interface.
+ *
+ * For each network interface, Linux keep data in two structure. "device"
+ * keep the generic data (same format for everybody) and "net_local" keep
+ * the additional specific data.
+ */
+struct net_local
+{
+  dev_node_t 	node;		/* ???? What is this stuff ???? */
+  struct net_device *	dev;		/* Reverse link... */
+  spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
+  struct pcmcia_device *	link;		/* pcmcia structure */
+  int		nresets;	/* Number of hw resets */
+  u_char	configured;	/* If it is configured */
+  u_char	reconfig_82593;	/* Need to reconfigure the controller */
+  u_char	promiscuous;	/* Promiscuous mode */
+  u_char	allmulticast;	/* All Multicast mode */
+  int		mc_count;	/* Number of multicast addresses */
+
+  int   	stop;		/* Current i82593 Stop Hit Register */
+  int   	rfp;		/* Last DMA machine receive pointer */
+  int		overrunning;	/* Receiver overrun flag */
+
+  iw_stats	wstats;		/* Wireless specific stats */
+
+  struct iw_spy_data	spy_data;
+  struct iw_public_data	wireless_data;
+
+#ifdef HISTOGRAM
+  int		his_number;		/* Number of intervals */
+  u_char	his_range[16];		/* Boundaries of interval ]n-1; n] */
+  u_long	his_sum[16];		/* Sum in interval */
+#endif	/* HISTOGRAM */
+#ifdef WAVELAN_ROAMING
+  u_long	domain_id;	/* Domain ID we lock on for roaming */
+  int		filter_domains;	/* Check Domain ID of beacon found */
+ struct wavepoint_table	wavepoint_table;	/* Table of visible WavePoints*/
+  wavepoint_history *	curr_point;		/* Current wavepoint */
+  int			cell_search;		/* Searching for new cell? */
+  struct timer_list	cell_timer;		/* Garbage collection */
+#endif	/* WAVELAN_ROAMING */
+  void __iomem *mem;
+};
+
+/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
+static inline u_char		/* data */
+	hasr_read(u_long);	/* Read the host interface : base address */
+static void
+	hacr_write(u_long,	/* Write to host interface : base address */
+		   u_char),	/* data */
+	hacr_write_slow(u_long,
+		   u_char);
+static void
+	psa_read(struct net_device *,	/* Read the Parameter Storage Area */
+		 int,		/* offset in PSA */
+		 u_char *,	/* buffer to fill */
+		 int),		/* size to read */
+	psa_write(struct net_device *,	/* Write to the PSA */
+		  int,		/* Offset in psa */
+		  u_char *,	/* Buffer in memory */
+		  int);		/* Length of buffer */
+static void
+	mmc_out(u_long,		/* Write 1 byte to the Modem Manag Control */
+		u_short,
+		u_char),
+	mmc_write(u_long,	/* Write n bytes to the MMC */
+		  u_char,
+		  u_char *,
+		  int);
+static u_char			/* Read 1 byte from the MMC */
+	mmc_in(u_long,
+	       u_short);
+static void
+	mmc_read(u_long,	/* Read n bytes from the MMC */
+		 u_char,
+		 u_char *,
+		 int),
+	fee_wait(u_long,	/* Wait for frequency EEprom : base address */
+		 int,		/* Base delay to wait for */
+		 int);		/* Number of time to wait */
+static void
+	fee_read(u_long,	/* Read the frequency EEprom : base address */
+		 u_short,	/* destination offset */
+		 u_short *,	/* data buffer */
+		 int);		/* number of registers */
+/* ---------------------- I82593 SUBROUTINES ----------------------- */
+static int
+	wv_82593_cmd(struct net_device *,	/* synchronously send a command to i82593 */ 
+		     char *,
+		     int,
+		     int);
+static inline int
+	wv_diag(struct net_device *);	/* Diagnostique the i82593 */
+static int
+	read_ringbuf(struct net_device *,	/* Read a receive buffer */
+		     int,
+		     char *,
+		     int);
+static void
+	wv_82593_reconfig(struct net_device *);	/* Reconfigure the controller */
+/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
+static void
+	wv_init_info(struct net_device *);	/* display startup info */
+/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
+static iw_stats *
+	wavelan_get_wireless_stats(struct net_device *);
+/* ----------------------- PACKET RECEPTION ----------------------- */
+static int
+	wv_start_of_frame(struct net_device *,	/* Seek beggining of current frame */
+			  int,	/* end of frame */
+			  int);	/* start of buffer */
+static void
+	wv_packet_read(struct net_device *,	/* Read a packet from a frame */
+		       int,
+		       int),
+	wv_packet_rcv(struct net_device *);	/* Read all packets waiting */
+/* --------------------- PACKET TRANSMISSION --------------------- */
+static void
+	wv_packet_write(struct net_device *,	/* Write a packet to the Tx buffer */
+			void *,
+			short);
+static netdev_tx_t
+	wavelan_packet_xmit(struct sk_buff *,	/* Send a packet */
+			    struct net_device *);
+/* -------------------- HARDWARE CONFIGURATION -------------------- */
+static int
+	wv_mmc_init(struct net_device *);	/* Initialize the modem */
+static int
+	wv_ru_stop(struct net_device *),	/* Stop the i82593 receiver unit */
+	wv_ru_start(struct net_device *);	/* Start the i82593 receiver unit */
+static int
+	wv_82593_config(struct net_device *);	/* Configure the i82593 */
+static int
+	wv_pcmcia_reset(struct net_device *);	/* Reset the pcmcia interface */
+static int
+	wv_hw_config(struct net_device *);	/* Reset & configure the whole hardware */
+static void
+	wv_hw_reset(struct net_device *);	/* Same, + start receiver unit */
+static int
+	wv_pcmcia_config(struct pcmcia_device *);	/* Configure the pcmcia interface */
+static void
+	wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */
+/* ---------------------- INTERRUPT HANDLING ---------------------- */
+static irqreturn_t
+	wavelan_interrupt(int,	/* Interrupt handler */
+			  void *);
+static void
+	wavelan_watchdog(struct net_device *);	/* Transmission watchdog */
+/* ------------------- CONFIGURATION CALLBACKS ------------------- */
+static int
+	wavelan_open(struct net_device *),		/* Open the device */
+	wavelan_close(struct net_device *);	/* Close the device */
+static void
+	wavelan_detach(struct pcmcia_device *p_dev);	/* Destroy a removed device */
+
+/**************************** VARIABLES ****************************/
+
+/*
+ * Parameters that can be set with 'insmod'
+ * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
+ */
+
+/* Shared memory speed, in ns */
+static int	mem_speed = 0;
+
+/* New module interface */
+module_param(mem_speed, int, 0);
+
+#ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */
+/* Enable roaming mode ? No ! Please keep this to 0 */
+static int	do_roaming = 0;
+module_param(do_roaming, bool, 0);
+#endif	/* WAVELAN_ROAMING */
+
+MODULE_LICENSE("GPL");
+
+#endif	/* WAVELAN_CS_P_H */
+
diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c
index 347c3ed..d442fd3 100644
--- a/drivers/telephony/ixj_pcmcia.c
+++ b/drivers/telephony/ixj_pcmcia.c
@@ -19,13 +19,6 @@
  *	PCMCIA service support for Quicknet cards
  */
  
-#ifdef PCMCIA_DEBUG
-static int pc_debug = PCMCIA_DEBUG;
-module_param(pc_debug, int, 0644);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-#else
-#define DEBUG(n, args...)
-#endif
 
 typedef struct ixj_info_t {
 	int ndev;
@@ -39,7 +32,7 @@
 
 static int ixj_probe(struct pcmcia_device *p_dev)
 {
-	DEBUG(0, "ixj_attach()\n");
+	dev_dbg(&p_dev->dev, "ixj_attach()\n");
 	/* Create new ixj device */
 	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 	p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
@@ -55,33 +48,30 @@
 
 static void ixj_detach(struct pcmcia_device *link)
 {
-	DEBUG(0, "ixj_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "ixj_detach\n");
 
 	ixj_cs_release(link);
 
         kfree(link->priv);
 }
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
 static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
 {
 	char *str;
 	int i, place;
-	DEBUG(0, "ixj_get_serial(0x%p)\n", link);
+	dev_dbg(&link->dev, "ixj_get_serial\n");
 
 	str = link->prod_id[0];
 	if (!str)
-		goto cs_failed;
+		goto failed;
 	printk("%s", str);
 	str = link->prod_id[1];
 	if (!str)
-		goto cs_failed;
+		goto failed;
 	printk(" %s", str);
 	str = link->prod_id[2];
 	if (!str)
-		goto cs_failed;
+		goto failed;
 	place = 1;
 	for (i = strlen(str) - 1; i >= 0; i--) {
 		switch (str[i]) {
@@ -118,9 +108,9 @@
 	}
 	str = link->prod_id[3];
 	if (!str)
-		goto cs_failed;
+		goto failed;
 	printk(" version %s\n", str);
-      cs_failed:
+failed:
 	return;
 }
 
@@ -151,13 +141,13 @@
 	cistpl_cftable_entry_t dflt = { 0 };
 
 	info = link->priv;
-	DEBUG(0, "ixj_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "ixj_config\n");
 
 	if (pcmcia_loop_config(link, ixj_config_check, &dflt))
-		goto cs_failed;
+		goto failed;
 
 	if (pcmcia_request_configuration(link, &link->conf))
-		goto cs_failed;
+		goto failed;
 
 	/*
  	 *	Register the card with the core.
@@ -170,7 +160,7 @@
 	ixj_get_serial(link, j);
 	return 0;
 
-      cs_failed:
+failed:
 	ixj_cs_release(link);
 	return -ENODEV;
 }
@@ -178,7 +168,7 @@
 static void ixj_cs_release(struct pcmcia_device *link)
 {
 	ixj_info_t *info = link->priv;
-	DEBUG(0, "ixj_cs_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "ixj_cs_release\n");
 	info->ndev = 0;
 	pcmcia_disable_device(link);
 }
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5ce8391..0f857e6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -444,7 +444,7 @@
 static inline int
 hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
 {
-	return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+	return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
 			       HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
 			       tt, NULL, 0, 1000);
 }
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index d5b6596..731150d4 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -1213,7 +1213,12 @@
 				tmp &= AMD_UNMASK_BIT(ep->num);
 				writel(tmp, &dev->regs->ep_irqmsk);
 			}
-		}
+		} else if (ep->in) {
+				/* enable ep irq */
+				tmp = readl(&dev->regs->ep_irqmsk);
+				tmp &= AMD_UNMASK_BIT(ep->num);
+				writel(tmp, &dev->regs->ep_irqmsk);
+			}
 
 	} else if (ep->dma) {
 
@@ -2005,18 +2010,17 @@
 {
 	int tmp;
 
-	/* empty queues and init hardware */
-	udc_basic_init(dev);
-	for (tmp = 0; tmp < UDC_EP_NUM; tmp++) {
-		empty_req_queue(&dev->ep[tmp]);
-	}
-
 	if (dev->gadget.speed != USB_SPEED_UNKNOWN) {
 		spin_unlock(&dev->lock);
 		driver->disconnect(&dev->gadget);
 		spin_lock(&dev->lock);
 	}
-	/* init */
+
+	/* empty queues and init hardware */
+	udc_basic_init(dev);
+	for (tmp = 0; tmp < UDC_EP_NUM; tmp++)
+		empty_req_queue(&dev->ep[tmp]);
+
 	udc_setup_endpoints(dev);
 }
 
@@ -2472,6 +2476,13 @@
 				}
 			}
 
+		} else if (!use_dma && ep->in) {
+			/* disable interrupt */
+			tmp = readl(
+				&dev->regs->ep_irqmsk);
+			tmp |= AMD_BIT(ep->num);
+			writel(tmp,
+				&dev->regs->ep_irqmsk);
 		}
 	}
 	/* clear status bits */
@@ -3279,6 +3290,17 @@
 		goto finished;
 	}
 
+	spin_lock_init(&dev->lock);
+	/* udc csr registers base */
+	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
+	/* dev registers base */
+	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
+	/* ep registers base */
+	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
+	/* fifo's base */
+	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
+	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
+
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
 		kfree(dev);
@@ -3331,7 +3353,6 @@
 	udc_pollstall_timer.data = 0;
 
 	/* device struct setup */
-	spin_lock_init(&dev->lock);
 	dev->gadget.ops = &udc_ops;
 
 	dev_set_name(&dev->gadget.dev, "gadget");
@@ -3340,16 +3361,6 @@
 	dev->gadget.name = name;
 	dev->gadget.is_dualspeed = 1;
 
-	/* udc csr registers base */
-	dev->csr = dev->virt_addr + UDC_CSR_ADDR;
-	/* dev registers base */
-	dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR;
-	/* ep registers base */
-	dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR;
-	/* fifo's base */
-	dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR);
-	dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR);
-
 	/* init registers, interrupts, ... */
 	startup_registers(dev);
 
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index a2db0e1..f81e4f0 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -52,9 +52,9 @@
 #include <asm/unaligned.h>
 #include <asm/mach-types.h>
 
-#include <mach/dma.h>
-#include <mach/usb.h>
-#include <mach/control.h>
+#include <plat/dma.h>
+#include <plat/usb.h>
+#include <plat/control.h>
 
 #include "omap_udc.h"
 
@@ -2098,6 +2098,7 @@
 		|| machine_is_omap_h4()
 #endif
 		|| machine_is_sx1()
+		|| cpu_is_omap7xx() /* No known omap7xx boards with vbus sense */
 		);
 }
 
@@ -2838,6 +2839,16 @@
 		udelay(100);
 	}
 
+	if (cpu_is_omap7xx()) {
+		dc_clk = clk_get(&pdev->dev, "usb_dc_ck");
+		hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck");
+		BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk));
+		/* can't use omap_udc_enable_clock yet */
+		clk_enable(dc_clk);
+		clk_enable(hhc_clk);
+		udelay(100);
+	}
+
 	INFO("OMAP UDC rev %d.%d%s\n",
 		omap_readw(UDC_REV) >> 4, omap_readw(UDC_REV) & 0xf,
 		config->otg ? ", Mini-AB" : "");
@@ -2970,7 +2981,7 @@
 		goto cleanup3;
 	}
 #endif
-	if (cpu_is_omap16xx()) {
+	if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 		udc->dc_clk = dc_clk;
 		udc->hhc_clk = hhc_clk;
 		clk_disable(hhc_clk);
@@ -3008,7 +3019,7 @@
 	if (xceiv)
 		otg_put_transceiver(xceiv);
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
 		clk_disable(hhc_clk);
 		clk_disable(dc_clk);
 		clk_put(hhc_clk);
@@ -3115,6 +3126,10 @@
 
 static int __init udc_init(void)
 {
+	/* Disable DMA for omap7xx -- it doesn't work right. */
+	if (cpu_is_omap7xx())
+		use_dma = 0;
+
 	INFO("%s, version: " DRIVER_VERSION
 #ifdef	USE_ISO
 		" (iso)"
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9835e07..f5f5601 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -28,6 +28,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/timer.h>
+#include <linux/ktime.h>
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
@@ -676,6 +677,7 @@
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
 	up_write(&ehci_cf_port_reset_rwsem);
+	ehci->last_periodic_enable = ktime_get_real();
 
 	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
 	ehci_info (ehci,
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 378861b..ead5f4f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -111,6 +111,10 @@
 	switch (pdev->vendor) {
 	case PCI_VENDOR_ID_INTEL:
 		ehci->need_io_watchdog = 0;
+		if (pdev->device == 0x27cc) {
+			ehci->broken_periodic = 1;
+			ehci_info(ehci, "using broken periodic workaround\n");
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 00ad9ce..139a2cc 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -487,8 +487,20 @@
 			 * we must clear the TT buffer (11.17.5).
 			 */
 			if (unlikely(last_status != -EINPROGRESS &&
-					last_status != -EREMOTEIO))
-				ehci_clear_tt_buffer(ehci, qh, urb, token);
+					last_status != -EREMOTEIO)) {
+				/* The TT's in some hubs malfunction when they
+				 * receive this request following a STALL (they
+				 * stop sending isochronous packets).  Since a
+				 * STALL can't leave the TT buffer in a busy
+				 * state (if you believe Figures 11-48 - 11-51
+				 * in the USB 2.0 spec), we won't clear the TT
+				 * buffer in this case.  Strictly speaking this
+				 * is a violation of the spec.
+				 */
+				if (last_status != -EPIPE)
+					ehci_clear_tt_buffer(ehci, qh, urb,
+							token);
+			}
 		}
 
 		/* if we're removing something not at the queue head,
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index b25cdea..a5535b5 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -475,6 +475,8 @@
 	/* make sure ehci_work scans these */
 	ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
 		% (ehci->periodic_size << 3);
+	if (unlikely(ehci->broken_periodic))
+		ehci->last_periodic_enable = ktime_get_real();
 	return 0;
 }
 
@@ -486,6 +488,16 @@
 	if (--ehci->periodic_sched)
 		return 0;
 
+	if (unlikely(ehci->broken_periodic)) {
+		/* delay experimentally determined */
+		ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000);
+		ktime_t now = ktime_get_real();
+		s64 delay = ktime_us_delta(safe, now);
+
+		if (unlikely(delay > 0))
+			udelay(delay);
+	}
+
 	/* did setting PSE not take effect yet?
 	 * takes effect only at frame boundaries...
 	 */
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 064e768..2d85e21 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -118,6 +118,7 @@
 	unsigned		stamp;
 	unsigned		random_frame;
 	unsigned long		next_statechange;
+	ktime_t			last_periodic_enable;
 	u32			command;
 
 	/* SILICON QUIRKS */
@@ -127,6 +128,7 @@
 	unsigned		big_endian_desc:1;
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
+	unsigned		broken_periodic:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 83cbecd..5645f70 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -24,10 +24,10 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <mach/mux.h>
+#include <plat/mux.h>
 #include <mach/irqs.h>
-#include <mach/fpga.h>
-#include <mach/usb.h>
+#include <plat/fpga.h>
+#include <plat/usb.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 516848d..39d253e 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -37,28 +37,8 @@
 /* MACROS                                                             */
 /*====================================================================*/
 
-#if defined(DEBUG) || defined(PCMCIA_DEBUG)
-
-static int pc_debug = 0;
-module_param(pc_debug, int, 0644);
-
-#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args)
-
-#else
-#define DBG(n, args...) do{}while(0)
-#endif	/* no debugging */
-
 #define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
 
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
-
-#define CS_CHECK(fn, ret) \
-	do { \
-		last_fn = (fn); \
-		if ((last_ret = (ret)) != 0) \
-			goto cs_failed; \
-	} while (0)
-
 /*====================================================================*/
 /* VARIABLES                                                          */
 /*====================================================================*/
@@ -76,7 +56,7 @@
 
 static void release_platform_dev(struct device * dev)
 {
-	DBG(0, "sl811_cs platform_dev release\n");
+	dev_dbg(dev, "sl811_cs platform_dev release\n");
 	dev->parent = NULL;
 }
 
@@ -140,7 +120,7 @@
 
 static void sl811_cs_detach(struct pcmcia_device *link)
 {
-	DBG(0, "sl811_cs_detach(0x%p)\n", link);
+	dev_dbg(&link->dev, "sl811_cs_detach\n");
 
 	sl811_cs_release(link);
 
@@ -150,7 +130,7 @@
 
 static void sl811_cs_release(struct pcmcia_device * link)
 {
-	DBG(0, "sl811_cs_release(0x%p)\n", link);
+	dev_dbg(&link->dev, "sl811_cs_release\n");
 
 	pcmcia_disable_device(link);
 	platform_device_unregister(&platform_dev);
@@ -205,11 +185,11 @@
 
 static int sl811_cs_config(struct pcmcia_device *link)
 {
-	struct device		*parent = &handle_to_dev(link);
+	struct device		*parent = &link->dev;
 	local_info_t		*dev = link->priv;
-	int			last_fn, last_ret;
+	int			ret;
 
-	DBG(0, "sl811_cs_config(0x%p)\n", link);
+	dev_dbg(&link->dev, "sl811_cs_config\n");
 
 	if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
 		goto failed;
@@ -217,14 +197,16 @@
 	/* require an IRQ and two registers */
 	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
 		goto failed;
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		CS_CHECK(RequestIRQ,
-			pcmcia_request_irq(link, &link->irq));
-	else
+	if (link->conf.Attributes & CONF_ENABLE_IRQ) {
+		ret = pcmcia_request_irq(link, &link->irq);
+		if (ret)
+			goto failed;
+	} else
 		goto failed;
 
-	CS_CHECK(RequestConfiguration,
-		pcmcia_request_configuration(link, &link->conf));
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		goto failed;
 
 	sprintf(dev->node.dev_name, driver_name);
 	dev->node.major = dev->node.minor = 0;
@@ -241,8 +223,6 @@
 
 	if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
 			< 0) {
-cs_failed:
-		cs_error(link, last_fn, last_ret);
 failed:
 		printk(KERN_WARNING "sl811_cs_config failed\n");
 		sl811_cs_release(link);
@@ -263,7 +243,6 @@
 
 	/* Initialize */
 	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
-	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
 	link->irq.Handler = NULL;
 
 	link->conf.Attributes = 0;
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index c3577bb..ef2332a 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1442,11 +1442,6 @@
 		musb_writew(regs, MUSB_TXCSR, value);
 		musb_writew(regs, MUSB_TXCSR, value);
 
-		/* re-enable interrupt */
-		if (enabled)
-			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
-					(1 << cppi_ch->index));
-
 		/* While we scrub the TX state RAM, ensure that we clean
 		 * up any interrupt that's currently asserted:
 		 * 1. Write to completion Ptr value 0x1(bit 0 set)
@@ -1459,6 +1454,11 @@
 		cppi_reset_tx(tx_ram, 1);
 		musb_writel(&tx_ram->tx_complete, 0, 0);
 
+		/* re-enable interrupt */
+		if (enabled)
+			musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG,
+					(1 << cppi_ch->index));
+
 		cppi_dump_tx(5, cppi_ch, " (done teardown)");
 
 		/* REVISIT tx side _should_ clean up the same way
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3a61ddb..547e0e3 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1450,7 +1450,7 @@
 #endif
 
 		if (hw_ep->max_packet_sz_tx) {
-			printk(KERN_DEBUG
+			DBG(1,
 				"%s: hw_ep %d%s, %smax %d\n",
 				musb_driver_name, i,
 				hw_ep->is_shared_fifo ? "shared" : "tx",
@@ -1459,7 +1459,7 @@
 				hw_ep->max_packet_sz_tx);
 		}
 		if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) {
-			printk(KERN_DEBUG
+			DBG(1,
 				"%s: hw_ep %d%s, %smax %d\n",
 				musb_driver_name, i,
 				"rx",
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 8b3c4e2..74073f9 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -4,6 +4,7 @@
  * Copyright 2005 Mentor Graphics Corporation
  * Copyright (C) 2005-2006 by Texas Instruments
  * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -436,14 +437,6 @@
 			csr |= MUSB_TXCSR_P_WZC_BITS;
 			csr &= ~MUSB_TXCSR_P_SENTSTALL;
 			musb_writew(epio, MUSB_TXCSR, csr);
-			if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-				dma->status = MUSB_DMA_STATUS_CORE_ABORT;
-				musb->dma_controller->channel_abort(dma);
-			}
-
-			if (request)
-				musb_g_giveback(musb_ep, request, -EPIPE);
-
 			break;
 		}
 
@@ -582,15 +575,25 @@
  */
 static void rxstate(struct musb *musb, struct musb_request *req)
 {
-	u16			csr = 0;
 	const u8		epnum = req->epnum;
 	struct usb_request	*request = &req->request;
 	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
 	void __iomem		*epio = musb->endpoints[epnum].regs;
 	unsigned		fifo_count = 0;
 	u16			len = musb_ep->packet_sz;
+	u16			csr = musb_readw(epio, MUSB_RXCSR);
 
-	csr = musb_readw(epio, MUSB_RXCSR);
+	/* We shouldn't get here while DMA is active, but we do... */
+	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
+		DBG(4, "DMA pending...\n");
+		return;
+	}
+
+	if (csr & MUSB_RXCSR_P_SENDSTALL) {
+		DBG(5, "%s stalling, RXCSR %04x\n",
+		    musb_ep->end_point.name, csr);
+		return;
+	}
 
 	if (is_cppi_enabled() && musb_ep->dma) {
 		struct dma_controller	*c = musb->dma_controller;
@@ -761,19 +764,10 @@
 			csr, dma ? " (dma)" : "", request);
 
 	if (csr & MUSB_RXCSR_P_SENTSTALL) {
-		if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
-			dma->status = MUSB_DMA_STATUS_CORE_ABORT;
-			(void) musb->dma_controller->channel_abort(dma);
-			request->actual += musb_ep->dma->actual_len;
-		}
-
 		csr |= MUSB_RXCSR_P_WZC_BITS;
 		csr &= ~MUSB_RXCSR_P_SENTSTALL;
 		musb_writew(epio, MUSB_RXCSR, csr);
-
-		if (request)
-			musb_g_giveback(musb_ep, request, -EPIPE);
-		goto done;
+		return;
 	}
 
 	if (csr & MUSB_RXCSR_P_OVERRUN) {
@@ -795,7 +789,7 @@
 		DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1,
 			"%s busy, csr %04x\n",
 			musb_ep->end_point.name, csr);
-		goto done;
+		return;
 	}
 
 	if (dma && (csr & MUSB_RXCSR_DMAENAB)) {
@@ -826,22 +820,15 @@
 		if ((request->actual < request->length)
 				&& (musb_ep->dma->actual_len
 					== musb_ep->packet_sz))
-			goto done;
+			return;
 #endif
 		musb_g_giveback(musb_ep, request, 0);
 
 		request = next_request(musb_ep);
 		if (!request)
-			goto done;
-
-		/* don't start more i/o till the stall clears */
-		musb_ep_select(mbase, epnum);
-		csr = musb_readw(epio, MUSB_RXCSR);
-		if (csr & MUSB_RXCSR_P_SENDSTALL)
-			goto done;
+			return;
 	}
 
-
 	/* analyze request if the ep is hot */
 	if (request)
 		rxstate(musb, to_musb_request(request));
@@ -849,8 +836,6 @@
 		DBG(3, "packet waiting for %s%s request\n",
 				musb_ep->desc ? "" : "inactive ",
 				musb_ep->end_point.name);
-
-done:
 	return;
 }
 
@@ -1244,7 +1229,7 @@
 	void __iomem		*mbase;
 	unsigned long		flags;
 	u16			csr;
-	struct musb_request	*request = NULL;
+	struct musb_request	*request;
 	int			status = 0;
 
 	if (!ep)
@@ -1260,24 +1245,29 @@
 
 	musb_ep_select(mbase, epnum);
 
-	/* cannot portably stall with non-empty FIFO */
 	request = to_musb_request(next_request(musb_ep));
-	if (value && musb_ep->is_in) {
-		csr = musb_readw(epio, MUSB_TXCSR);
-		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
-			DBG(3, "%s fifo busy, cannot halt\n", ep->name);
-			spin_unlock_irqrestore(&musb->lock, flags);
-			return -EAGAIN;
+	if (value) {
+		if (request) {
+			DBG(3, "request in progress, cannot halt %s\n",
+			    ep->name);
+			status = -EAGAIN;
+			goto done;
 		}
-
+		/* Cannot portably stall with non-empty FIFO */
+		if (musb_ep->is_in) {
+			csr = musb_readw(epio, MUSB_TXCSR);
+			if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
+				DBG(3, "FIFO busy, cannot halt %s\n", ep->name);
+				status = -EAGAIN;
+				goto done;
+			}
+		}
 	}
 
 	/* set/clear the stall and toggle bits */
 	DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear");
 	if (musb_ep->is_in) {
 		csr = musb_readw(epio, MUSB_TXCSR);
-		if (csr & MUSB_TXCSR_FIFONOTEMPTY)
-			csr |= MUSB_TXCSR_FLUSHFIFO;
 		csr |= MUSB_TXCSR_P_WZC_BITS
 			| MUSB_TXCSR_CLRDATATOG;
 		if (value)
@@ -1300,14 +1290,13 @@
 		musb_writew(epio, MUSB_RXCSR, csr);
 	}
 
-done:
-
 	/* maybe start the first request in the queue */
 	if (!musb_ep->busy && !value && request) {
 		DBG(3, "restarting the request\n");
 		musb_ep_restart(musb, request);
 	}
 
+done:
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return status;
 }
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 7a67786..522efb3 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -511,7 +511,8 @@
 
 	/* update the flags */
 	if (fifo_count < MUSB_MAX_END0_PACKET
-			|| request->actual == request->length) {
+			|| (request->actual == request->length
+				&& !request->zero)) {
 		musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT;
 		csr |= MUSB_CSR0_P_DATAEND;
 	} else
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index cf94511..e3ab40a 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1301,8 +1301,11 @@
 		return;
 	} else	if (usb_pipeisoc(pipe) && dma) {
 		if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
-				offset, length))
+				offset, length)) {
+			if (is_cppi_enabled() || tusb_dma_omap())
+				musb_h_tx_dma_start(hw_ep);
 			return;
+		}
 	} else	if (tx_csr & MUSB_TXCSR_DMAENAB) {
 		DBG(1, "not complete, but DMA enabled?\n");
 		return;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 3487520..6761d20 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -35,7 +35,7 @@
 
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h
index dc76707..fbede77 100644
--- a/drivers/usb/musb/omap2430.h
+++ b/drivers/usb/musb/omap2430.h
@@ -12,7 +12,7 @@
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430)
 #include <mach/hardware.h>
-#include <mach/usb.h>
+#include <plat/usb.h>
 
 /*
  * OMAP2430-specific definitions
diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c
index 7e073a0..e13c770 100644
--- a/drivers/usb/musb/tusb6010_omap.c
+++ b/drivers/usb/musb/tusb6010_omap.c
@@ -15,8 +15,8 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
 
 #include "musb_core.h"
 
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 77a5f41..d54460a 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -36,8 +36,8 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <mach/usb.h>
-#include <mach/mux.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
 
 
 #ifndef	DEBUG
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 9c60d6d..ebcc6d0 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1937,7 +1937,7 @@
 		return;
 	}
 	/* account for transferred data */
-	countback = urb->actual_length;
+	countback = urb->transfer_buffer_length;
 	data_offset = priv->write_offset;
 	if (data_offset > 0) {
 		/* Subtract the control bytes */
@@ -1950,7 +1950,6 @@
 
 	if (status) {
 		dbg("nonzero write bulk status received: %d", status);
-		return;
 	}
 
 	usb_serial_port_softint(port);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 319aaf97..0577e4b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -336,6 +336,10 @@
 #define AIRPLUS_VENDOR_ID			0x1011
 #define AIRPLUS_PRODUCT_MCD650			0x3198
 
+/* 4G Systems products */
+#define FOUR_G_SYSTEMS_VENDOR_ID		0x1c9e
+#define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -599,6 +603,7 @@
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
+	{ USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 188e1ba..6b89eb5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,9 @@
 menu "Graphics support"
 	depends on HAS_IOMEM
 
+config HAVE_FB_ATMEL
+	bool
+
 source "drivers/char/agp/Kconfig"
 
 source "drivers/gpu/vga/Kconfig"
@@ -937,7 +940,7 @@
 
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
+	depends on FB && HAVE_FB_ATMEL
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 37624f7..b7687c5 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -2242,6 +2242,9 @@
 	if (!external_vgaiobase)
 		return 1;
 
+	if (regno > 255)
+		return 1;
+
 	switch (external_card_type) {
 	case IS_VGA:
 		OUTB(0x3c8, regno);
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 701a108..7fcb0eb 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -25,6 +25,7 @@
 
 #define DA9034_WLED_CONTROL1	0x3C
 #define DA9034_WLED_CONTROL2	0x3D
+#define DA9034_WLED_ISET(x)	((x) & 0x1f)
 
 #define DA9034_WLED_BOOST_EN	(1 << 5)
 
@@ -101,6 +102,7 @@
 
 static int da903x_backlight_probe(struct platform_device *pdev)
 {
+	struct da9034_backlight_pdata *pdata = pdev->dev.platform_data;
 	struct da903x_backlight_data *data;
 	struct backlight_device *bl;
 	int max_brightness;
@@ -127,6 +129,11 @@
 	data->da903x_dev = pdev->dev.parent;
 	data->current_brightness = 0;
 
+	/* adjust the WLED output current */
+	if (pdata)
+		da903x_write(data->da903x_dev, DA9034_WLED_CONTROL2,
+				DA9034_WLED_ISET(pdata->output_current));
+
 	bl = backlight_device_register(pdev->name, data->da903x_dev,
 			data, &da903x_backlight_ops);
 	if (IS_ERR(bl)) {
diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c
index cbad67e8..8693e5f 100644
--- a/drivers/video/backlight/omap1_bl.c
+++ b/drivers/video/backlight/omap1_bl.c
@@ -26,8 +26,8 @@
 #include <linux/backlight.h>
 
 #include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 
diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c
index bbfb502..4a3d46e 100644
--- a/drivers/video/backlight/tdo24m.c
+++ b/drivers/video/backlight/tdo24m.c
@@ -367,6 +367,7 @@
 
 	spi_message_init(m);
 
+	x->cs_change = 1;
 	x->tx_buf = &lcd->buf[0];
 	spi_message_add_tail(x, m);
 
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index da55cca..cc4bbbe 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -585,6 +585,11 @@
 	vgacon_uni_pagedir[1]++;
 	if (!vgacon_uni_pagedir[0] && p)
 		con_set_default_unimap(c);
+
+	/* Only set the default if the user didn't deliberately override it */
+	if (global_cursor_default == -1)
+		global_cursor_default =
+			!(screen_info.flags & VIDEO_FLAGS_NOCURSOR);
 }
 
 static void vgacon_deinit(struct vc_data *c)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 035d568..ea1fd3f 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -554,11 +554,11 @@
 		var->transp.length = 0;
 		break;
 	case 16:		/* RGB 565 */
-		var->red.offset = 0;
+		var->red.offset = 11;
 		var->red.length = 5;
 		var->green.offset = 5;
 		var->green.length = 6;
-		var->blue.offset = 11;
+		var->blue.offset = 0;
 		var->blue.length = 5;
 		var->transp.offset = 0;
 		var->transp.length = 0;
@@ -591,7 +591,7 @@
 		unregister_framebuffer(info);
 		fb_dealloc_cmap(&info->cmap);
 		dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE,
-					info->screen_base,
+					info->screen_base - PAGE_SIZE,
 					info->fix.smem_start);
 		free_irq(par->irq, par);
 		clk_disable(par->lcdc_clk);
@@ -749,6 +749,7 @@
 				(PAGE_SIZE - par->palette_sz);
 
 	/* the rest of the frame buffer is pixel data */
+	da8xx_fb_info->screen_base = par->v_palette_base + par->palette_sz;
 	da8xx_fb_fix.smem_start = par->p_palette_base + par->palette_sz;
 	da8xx_fb_fix.smem_len = par->databuf_sz - par->palette_sz;
 	da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8;
@@ -787,6 +788,8 @@
 	da8xx_fb_info->var = da8xx_fb_var;
 	da8xx_fb_info->fbops = &da8xx_fb_ops;
 	da8xx_fb_info->pseudo_palette = par->pseudo_palette;
+	da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
+				FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
 
 	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
 	if (ret)
@@ -825,7 +828,7 @@
 
 err_release_fb_mem:
 	dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE,
-				da8xx_fb_info->screen_base,
+				da8xx_fb_info->screen_base - PAGE_SIZE,
 				da8xx_fb_info->fix.smem_start);
 
 err_release_fb:
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 1a83709..f67db42 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -1147,7 +1147,7 @@
 	gbefb_setup(options);
 #endif
 
-	if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
+	if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) {
 		printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
 		ret = -EBUSY;
 		goto out_release_framebuffer;
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index b63b198..49226a1 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -35,6 +35,7 @@
 objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
 objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
 objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o
+objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
 
 omapfb-objs := $(objs-yy)
 
diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
index 70dadf9..f5d75f2 100644
--- a/drivers/video/omap/blizzard.c
+++ b/drivers/video/omap/blizzard.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <mach/dma.h>
-#include <mach/omapfb.h>
-#include <mach/blizzard.h>
+#include <plat/dma.h>
+#include <plat/omapfb.h>
+#include <plat/blizzard.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index f16e421..7c833db 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -25,9 +25,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/sram.h>
-#include <mach/omapfb.h>
-#include <mach/board.h>
+#include <plat/sram.h>
+#include <plat/omapfb.h>
+#include <plat/board.h>
 
 #include "dispc.h"
 
@@ -204,6 +204,7 @@
 /* Select RFBI or bypass mode */
 static void enable_rfbi_mode(int enable)
 {
+	void __iomem *rfbi_control;
 	u32 l;
 
 	l = dispc_read_reg(DISPC_CONTROL);
@@ -216,9 +217,15 @@
 	dispc_write_reg(DISPC_CONTROL, l);
 
 	/* Set bypass mode in RFBI module */
-	l = __raw_readl(OMAP2_IO_ADDRESS(RFBI_CONTROL));
+	rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
+	if (!rfbi_control) {
+		pr_err("Unable to ioremap rfbi_control\n");
+		return;
+	}
+	l = __raw_readl(rfbi_control);
 	l |= enable ? 0 : (1 << 1);
-	__raw_writel(l, OMAP2_IO_ADDRESS(RFBI_CONTROL));
+	__raw_writel(l, rfbi_control);
+	iounmap(rfbi_control);
 }
 
 static void set_lcd_data_lines(int data_lines)
@@ -1367,6 +1374,7 @@
 	int r;
 	u32 l;
 	struct lcd_panel *panel = fbdev->panel;
+	void __iomem *ram_fw_base;
 	int tmo = 10000;
 	int skip_init = 0;
 	int i;
@@ -1441,7 +1449,13 @@
 	}
 
 	/* L3 firewall setting: enable access to OCM RAM */
-	__raw_writel(0x402000b0, OMAP2_IO_ADDRESS(0x680050a0));
+	ram_fw_base = ioremap(0x68005000, SZ_1K);
+	if (!ram_fw_base) {
+		dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
+		goto fail1;
+	}
+	__raw_writel(0x402000b0, ram_fw_base + 0xa0);
+	iounmap(ram_fw_base);
 
 	if ((r = alloc_palette_ram()) < 0)
 		goto fail2;
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index ca51583..17a975e 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -26,9 +26,9 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <mach/dma.h>
-#include <mach/omapfb.h>
-#include <mach/hwa742.h>
+#include <plat/dma.h>
+#include <plat/omapfb.h>
+#include <plat/hwa742.h>
 
 #define HWA742_REV_CODE_REG       0x0
 #define HWA742_CONFIG_REG         0x2
diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
index 393712b..fea7feee 100644
--- a/drivers/video/omap/lcd_2430sdp.c
+++ b/drivers/video/omap/lcd_2430sdp.c
@@ -27,8 +27,8 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 #include <asm/mach-types.h>
 
 #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 1f74399..3d52772 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -25,9 +25,9 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 #include <mach/hardware.h>
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 #define AMS_DELTA_DEFAULT_CONTRAST	112
 
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 626ae3a5..4c5cefc 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -25,8 +25,8 @@
 #include <linux/platform_device.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 
 /* #define USE_35INCH_LCD 1 */
 
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 417ae5e..240b4fb 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -24,7 +24,7 @@
 #include <linux/i2c/tps65010.h>
 
 #include <mach/gpio.h>
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
index 0c398bd..720625d 100644
--- a/drivers/video/omap/lcd_h4.c
+++ b/drivers/video/omap/lcd_h4.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/omap/lcd_htcherald.c
new file mode 100644
index 0000000..2e0c81e
--- /dev/null
+++ b/drivers/video/omap/lcd_htcherald.c
@@ -0,0 +1,130 @@
+/*
+ * File: drivers/video/omap/lcd-htcherald.c
+ *
+ * LCD panel support for the HTC Herald
+ *
+ * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ * Copyright (C) 2009 Wing Linux
+ *
+ * Based on the lcd_htcwizard.c file from the linwizard project:
+ * Copyright (C) linwizard.sourceforge.net
+ * Author: Angelo Arrifano <miknix@gmail.com>
+ * Based on lcd_h4 by Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <plat/omapfb.h>
+
+static int htcherald_panel_init(struct lcd_panel *panel,
+					struct omapfb_device *fbdev)
+{
+	return 0;
+}
+
+static void htcherald_panel_cleanup(struct lcd_panel *panel)
+{
+}
+
+static int htcherald_panel_enable(struct lcd_panel *panel)
+{
+	return 0;
+}
+
+static void htcherald_panel_disable(struct lcd_panel *panel)
+{
+}
+
+static unsigned long htcherald_panel_get_caps(struct lcd_panel *panel)
+{
+	return 0;
+}
+
+/* Found on WIZ200 (miknix) and some HERA110 models (darkstar62) */
+struct lcd_panel htcherald_panel_1 = {
+	.name		= "lcd_herald",
+	.config		= OMAP_LCDC_PANEL_TFT |
+			  OMAP_LCDC_INV_HSYNC |
+			  OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_PIX_CLOCK,
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 6093,
+	.pcd		= 0, /* 15 */
+	.hsw		= 10,
+	.hfp		= 10,
+	.hbp		= 20,
+	.vsw		= 3,
+	.vfp		= 2,
+	.vbp		= 2,
+
+	.init		= htcherald_panel_init,
+	.cleanup	= htcherald_panel_cleanup,
+	.enable		= htcherald_panel_enable,
+	.disable	= htcherald_panel_disable,
+	.get_caps	= htcherald_panel_get_caps,
+};
+
+static int htcherald_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&htcherald_panel_1);
+	return 0;
+}
+
+static int htcherald_panel_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static int htcherald_panel_suspend(struct platform_device *pdev,
+						pm_message_t mesg)
+{
+	return 0;
+}
+
+static int htcherald_panel_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+struct platform_driver htcherald_panel_driver = {
+	.probe		= htcherald_panel_probe,
+	.remove		= htcherald_panel_remove,
+	.suspend	= htcherald_panel_suspend,
+	.resume		= htcherald_panel_resume,
+	.driver		= {
+		.name	= "lcd_htcherald",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int htcherald_panel_drv_init(void)
+{
+	return platform_driver_register(&htcherald_panel_driver);
+}
+
+static void htcherald_panel_drv_cleanup(void)
+{
+	platform_driver_unregister(&htcherald_panel_driver);
+}
+
+module_init(htcherald_panel_drv_init);
+module_exit(htcherald_panel_drv_cleanup);
+
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
index cdbd8bb..aafe9b4 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/omap/lcd_inn1510.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/fpga.h>
-#include <mach/omapfb.h>
+#include <plat/fpga.h>
+#include <plat/omapfb.h>
 
 static int innovator1510_panel_init(struct lcd_panel *panel,
 				    struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 268f7f8..0de3382 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/gpio.h>
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
index dbfe897..6a260df 100644
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -27,8 +27,8 @@
 #include <linux/i2c/twl4030.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 #include <asm/mach-types.h>
 
 #define LCD_PANEL_BACKLIGHT_GPIO	(15 + OMAP_MAX_GPIO_LINES)
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index 918ee89..2162eb0 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -23,8 +23,8 @@
 #include <linux/workqueue.h>
 #include <linux/spi/spi.h>
 
-#include <mach/omapfb.h>
-#include <mach/lcd_mipid.h>
+#include <plat/omapfb.h>
+#include <plat/lcd_mipid.h>
 
 #define MIPID_MODULE_NAME		"lcd_mipid"
 
diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c
index 7a2bbe2..e1a38ab 100644
--- a/drivers/video/omap/lcd_omap2evm.c
+++ b/drivers/video/omap/lcd_omap2evm.c
@@ -26,8 +26,8 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 #include <asm/mach-types.h>
 
 #define LCD_PANEL_ENABLE_GPIO	154
diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
index 4011910..ccec084 100644
--- a/drivers/video/omap/lcd_omap3beagle.c
+++ b/drivers/video/omap/lcd_omap3beagle.c
@@ -25,8 +25,8 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 #include <asm/mach-types.h>
 
 #define LCD_PANEL_ENABLE_GPIO       170
diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c
index b6a4c2c..556eb31 100644
--- a/drivers/video/omap/lcd_omap3evm.c
+++ b/drivers/video/omap/lcd_omap3evm.c
@@ -25,8 +25,8 @@
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 #include <asm/mach-types.h>
 
 #define LCD_PANEL_ENABLE_GPIO       153
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index b3fa88b..bb21d7d 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -24,8 +24,8 @@
 #include <linux/platform_device.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
index 2bc5c92..b0f86e5 100644
--- a/drivers/video/omap/lcd_overo.c
+++ b/drivers/video/omap/lcd_overo.c
@@ -24,8 +24,8 @@
 #include <linux/i2c/twl4030.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/omapfb.h>
+#include <plat/mux.h>
+#include <plat/omapfb.h>
 #include <asm/mach-types.h>
 
 #define LCD_ENABLE       144
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
index 4bf3c79..d302896 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/omap/lcd_palmte.c
@@ -23,8 +23,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/fpga.h>
-#include <mach/omapfb.h>
+#include <plat/fpga.h>
+#include <plat/omapfb.h>
 
 static int palmte_panel_init(struct lcd_panel *panel,
 				struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index 48ea1f9..557424f 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -30,7 +30,7 @@
 #include <linux/io.h>
 
 #include <mach/gpio.h>
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 static int palmtt_panel_init(struct lcd_panel *panel,
 	struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
index 0697d29..5f4b5b2c 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/omap/lcd_palmz71.c
@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 static int palmz71_panel_init(struct lcd_panel *panel,
 			      struct omapfb_device *fbdev)
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
index ab39492..5f32caf 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/omap/lcdc.c
@@ -29,8 +29,8 @@
 #include <linux/vmalloc.h>
 #include <linux/clk.h>
 
-#include <mach/dma.h>
-#include <mach/omapfb.h>
+#include <plat/dma.h>
+#include <plat/omapfb.h>
 
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 0d0c8c8..f900a43 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -28,8 +28,8 @@
 #include <linux/mm.h>
 #include <linux/uaccess.h>
 
-#include <mach/dma.h>
-#include <mach/omapfb.h>
+#include <plat/dma.h>
+#include <plat/omapfb.h>
 
 #include "lcdc.h"
 #include "dispc.h"
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index ee01e84..c90fa39 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -27,7 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/omapfb.h>
+#include <plat/omapfb.h>
 
 #include "dispc.h"
 
diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
index a769462..79dc84f 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/omap/sossi.c
@@ -24,8 +24,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
-#include <mach/dma.h>
-#include <mach/omapfb.h>
+#include <plat/dma.h>
+#include <plat/omapfb.h>
 
 #include "lcdc.h"
 
diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index 84d8327..75285d3 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -687,6 +687,7 @@
 	}
 
 	info->fix.smem_start = (unsigned long)fbi->fb_start_dma;
+	set_graphics_start(info, 0, 0);
 
 	/*
 	 * Set video mode according to platform data.
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 1820c4a..f58a3aa 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -80,7 +80,8 @@
 static int pxafb_activate_var(struct fb_var_screeninfo *var,
 				struct pxafb_info *);
 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
-static void setup_base_frame(struct pxafb_info *fbi, int branch);
+static void setup_base_frame(struct pxafb_info *fbi,
+                             struct fb_var_screeninfo *var, int branch);
 static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal,
 			   unsigned long offset, size_t size);
 
@@ -397,6 +398,7 @@
 	var->lower_margin	= mode->lower_margin;
 	var->sync		= mode->sync;
 	var->grayscale		= mode->cmap_greyscale;
+	var->transp.length	= mode->transparency;
 
 	/* set the initial RGBA bitfields */
 	pxafb_set_pixfmt(var, mode->depth);
@@ -531,12 +533,22 @@
 			     struct fb_info *info)
 {
 	struct pxafb_info *fbi = (struct pxafb_info *)info;
+	struct fb_var_screeninfo newvar;
 	int dma = DMA_MAX + DMA_BASE;
 
 	if (fbi->state != C_ENABLE)
 		return 0;
 
-	setup_base_frame(fbi, 1);
+	/* Only take .xoffset, .yoffset and .vmode & FB_VMODE_YWRAP from what
+	 * was passed in and copy the rest from the old screeninfo.
+	 */
+	memcpy(&newvar, &fbi->fb.var, sizeof(newvar));
+	newvar.xoffset = var->xoffset;
+	newvar.yoffset = var->yoffset;
+	newvar.vmode &= ~FB_VMODE_YWRAP;
+	newvar.vmode |= var->vmode & FB_VMODE_YWRAP;
+
+	setup_base_frame(fbi, &newvar, 1);
 
 	if (fbi->lccr0 & LCCR0_SDS)
 		lcd_writel(fbi, FBR1, fbi->fdadr[dma + 1] | 0x1);
@@ -1052,9 +1064,10 @@
 	return 0;
 }
 
-static void setup_base_frame(struct pxafb_info *fbi, int branch)
+static void setup_base_frame(struct pxafb_info *fbi,
+                             struct fb_var_screeninfo *var,
+                             int branch)
 {
-	struct fb_var_screeninfo *var = &fbi->fb.var;
 	struct fb_fix_screeninfo *fix = &fbi->fb.fix;
 	int nbytes, dma, pal, bpp = var->bits_per_pixel;
 	unsigned long offset;
@@ -1332,7 +1345,7 @@
 #endif
 		setup_parallel_timing(fbi, var);
 
-	setup_base_frame(fbi, 0);
+	setup_base_frame(fbi, var, 0);
 
 	fbi->reg_lccr0 = fbi->lccr0 |
 		(LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 3ed571a..429ea99 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -43,7 +43,7 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 #include <mach/hardware.h>
-#include <mach/prcm.h>
+#include <plat/prcm.h>
 
 #include "omap_wdt.h"
 
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index f24d041..4d227b15 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -317,7 +317,7 @@
 
 static struct platform_driver platform_wdt_driver = {
 	.driver = {
-		.name = "watchdog",
+		.name = "pnx4008-watchdog",
 		.owner	= THIS_MODULE,
 	},
 	.probe = pnx4008_wdt_probe,
@@ -352,4 +352,4 @@
 
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-MODULE_ALIAS("platform:watchdog");
+MODULE_ALIAS("platform:pnx4008-watchdog");
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index f6cccc9..bf12d06 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -62,7 +62,7 @@
 static int timeout = WATCHDOG_TIMEOUT;
 module_param(timeout, int, 0);
 MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default="
-		WATCHDOG_TIMEOUT ")");
+		__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
@@ -276,7 +276,7 @@
 		return -ENODEV;
 	}
 
-	wdt_reg = ioremap_nocache(r->start, r->end - r->start);
+	wdt_reg = ioremap_nocache(r->start, resource_size(r));
 	if (!wdt_reg) {
 		printk(KERN_ERR PFX "failed to remap I/O resources\n");
 		return -ENXIO;
diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c
index d3c824d..c14ae86 100644
--- a/drivers/watchdog/riowd.c
+++ b/drivers/watchdog/riowd.c
@@ -10,7 +10,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
 #include <linux/watchdog.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -75,7 +74,6 @@
 
 static int riowd_open(struct inode *inode, struct file *filp)
 {
-	cycle_kernel_lock();
 	nonseekable_open(inode, filp);
 	return 0;
 }
@@ -194,6 +192,8 @@
 		printk(KERN_ERR PFX "Cannot map registers.\n");
 		goto out_free;
 	}
+	/* Make miscdev useable right away */
+	riowd_device = p;
 
 	err = misc_register(&riowd_miscdev);
 	if (err) {
@@ -205,10 +205,10 @@
 	       "regs at %p\n", riowd_timeout, p->regs);
 
 	dev_set_drvdata(&op->dev, p);
-	riowd_device = p;
 	return 0;
 
 out_iounmap:
+	riowd_device = NULL;
 	of_iounmap(&op->resource[0], p->regs, 2);
 
 out_free:
diff --git a/drivers/xen/cpu_hotplug.c b/drivers/xen/cpu_hotplug.c
index bdfd584..0f765a9 100644
--- a/drivers/xen/cpu_hotplug.c
+++ b/drivers/xen/cpu_hotplug.c
@@ -86,7 +86,7 @@
 	for_each_possible_cpu(cpu) {
 		if (vcpu_online(cpu) == 0) {
 			(void)cpu_down(cpu);
-			cpu_clear(cpu, cpu_present_map);
+			set_cpu_present(cpu, false);
 		}
 	}
 
diff --git a/drivers/zorro/zorro-driver.c b/drivers/zorro/zorro-driver.c
index e6c4390..53180a3 100644
--- a/drivers/zorro/zorro-driver.c
+++ b/drivers/zorro/zorro-driver.c
@@ -156,5 +156,4 @@
 EXPORT_SYMBOL(zorro_match_device);
 EXPORT_SYMBOL(zorro_register_driver);
 EXPORT_SYMBOL(zorro_unregister_driver);
-EXPORT_SYMBOL(zorro_dev_driver);
 EXPORT_SYMBOL(zorro_bus_type);
diff --git a/firmware/Makefile b/firmware/Makefile
index f4ca0c7..6d5c3ab 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,7 +32,7 @@
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.0.21.0.fw bnx2x-e1h-5.0.21.0.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.7.0.fw bnx2x-e1h-5.2.7.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j3.fw \
 			     bnx2/bnx2-rv2p-09-5.0.0.j3.fw \
 			     bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 7a8adc0..34b5d0a 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -678,8 +678,8 @@
 
 Driver: bnx2x: Broadcom Everest
 
-File: bnx2x-e1-4.8.53.0.fw.ihex
-File: bnx2x-e1h-4.8.53.0.fw.ihex
+File: bnx2x-e1-5.2.7.0.fw.ihex
+File: bnx2x-e1h-5.2.7.0.fw.ihex
 
 License:
   Copyright (c) 2007-2009 Broadcom Corporation
diff --git a/firmware/bnx2x-e1-5.0.21.0.fw.ihex b/firmware/bnx2x-e1-5.0.21.0.fw.ihex
deleted file mode 100644
index c51afd4..0000000
--- a/firmware/bnx2x-e1-5.0.21.0.fw.ihex
+++ /dev/null
@@ -1,10184 +0,0 @@
-:10000000000028B0000000600000068800002918E9
-:100010000000161400002FA800000098000045C042
-:100020000000738800004660000000CC0000B9F0BA
-:1000300000009A4C0000BAC0000000940001551066
-:10004000000057B8000155A8000000B80001AD68D5
-:100050000000CE1C0001AE280000000400027C4815
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000060400CC0000000418
-:10010000020400DC00100000020400E012140000F1
-:10011000020400E422140000020400E8321400008B
-:10012000060400EC000000040104012400000000AB
-:1001300001040128000000000104012C000000005F
-:10014000010401300000000002040004000000FF70
-:1001500002040008000000FF0204000C000000FF81
-:1001600002040010000000FF02040014000000FF61
-:1001700002040018000000FF0204001C000000FF41
-:1001800002040020000000FF020400240000003EE2
-:1001900002040028000000000204002C0000003FC0
-:1001A000020400300000003F020400340000003F61
-:1001B00002040038000000000204003C0000003F80
-:1001C000020400400000003F020400440000003F21
-:1001D00002042008000004110204200C00000400A6
-:1001E000020420100000040402042014000004197A
-:1001F0000204201C0000FFFF020420200000FFFF7B
-:10020000020420240000FFFF020420280000FFFF5A
-:1002100006042038000000020204204000000034E0
-:100220000204204400000035060420480000007C41
-:100230000204223807FFFFFF0204223C0000003FB7
-:100240000204224007FFFFFF020422440000000FC7
-:1002500001042248000000000104224C00000000BC
-:10026000010422500000000001042254000000009C
-:1002700001042258000000000104225C000000007C
-:10028000010422600000000001042264000000005C
-:1002900001042268000000000104226C000000003C
-:1002A000010422700000000001042274000000001C
-:1002B00001042278000000000104227C00000000FC
-:1002C000020424BC000000010C042000000003E82C
-:1002D0000A042000000000010B0420000000000AB6
-:1002E0000205004400000020020500480000003222
-:1002F000020500900215002002050094021500205E
-:1003000002050098000000300205009C0810000063
-:10031000020500A000000033020500A40000003028
-:10032000020500A800000031020500AC0000000238
-:10033000020500B000000005020500B40000000640
-:10034000020500B800000002020500BC0000000227
-:10035000020500C000000000020500C40000000506
-:10036000020500C800000002020500CC00000002E7
-:10037000020500D000000002020500D400000001C8
-:1003800002050114000000010205011C000000012B
-:100390000205012000000002020502040000000125
-:1003A0000205020C0000004002050210000000409F
-:1003B0000205021C000000200205022000000013BC
-:1003C0000205022400000020060502400000000A89
-:1003D0000405028000200000020500500000000714
-:1003E0000205005400000007020500580000000844
-:1003F0000205005C00000008060500600000000423
-:10040000020500D800000006020500E00000000D13
-:10041000020500E40000002D020500E800000007CE
-:10042000020500EC00000027020500F000000007B4
-:10043000020500F400000027020500F80000000794
-:10044000020500FC00000027020500040000000176
-:1004500002050008000000010205000C0000000178
-:100460000205001000000001020500140000000158
-:1004700002050018000000010205001C0000000138
-:100480000205002000000001020500240000000118
-:1004900002050028000000010205002C00000001F8
-:1004A00002050030000000010205003400000001D8
-:1004B00002050038000000010205003C00000001B8
-:1004C00002050040000000010406100002000020A8
-:1004D000020600DC00000001010600D80000000058
-:1004E0000406020000030220020600DC00000000F7
-:1004F00002060068000000B802060078000001143F
-:10050000010600B800000000010600C8000000005D
-:100510000206006C000000B80206007C0000011416
-:10052000010600BC00000000010600CC0000000035
-:100530000718040000960000081807600014022342
-:10054000071C000034B80000071C800034E90D2FA0
-:10055000071D000009DD1A6A081D14005D800225D0
-:100560000118000000000000011800040000000055
-:1005700001180008000000000118000C0000000035
-:100580000118001000000000011800140000000015
-:1005900002180020000000010218002400000002E0
-:1005A00002180028000000030218002C00000000C0
-:1005B000021800300000000402180034000000019E
-:1005C00002180038000000000218003C0000000182
-:1005D000021800400000000402180044000000005F
-:1005E00002180048000000010218004C000000033F
-:1005F0000218005000000000021800540000000122
-:1006000002180058000000040218005C00000000FE
-:1006100002180060000000010218006400000003DE
-:1006200002180068000000000218006C00000001C1
-:10063000021800700000000402180074000000009E
-:1006400002180078000000040218007C000000037B
-:100650000618008000000002021800A400003FFFFE
-:10066000021800A8000003FF021802240000000086
-:1006700002180234000000000218024C00000000C2
-:10068000021802E4000000FF061810000000040039
-:10069000021B8BC000000001021B80000000003420
-:1006A000021B804000000018021B80800000000C2C
-:1006B000021B80C0000000200C1B83000007A1204B
-:1006C0000A1B8300000001380B1B83000000138805
-:1006D000021B83C0000001F4061A2000000000B2D3
-:1006E000061A23C800000181041A29CC0001022740
-:1006F000061A1020000000C8061A100000000002B0
-:10070000061A1E3800000002061A1E300000000201
-:10071000061A080000000002061A0808000000027D
-:10072000061A081000000004041A1FB00005022871
-:10073000041A4CB00008022D061A22C8000000203E
-:10074000061A400000000124021A4920000000009F
-:10075000061A14000000000A061A145000000006D1
-:10076000061A150000000002041A150800050235DB
-:10077000061A151C00000009061A15800000001456
-:10078000061A09C000000048061A0800000000020E
-:10079000061A08200000000E041A1FB00002023AD8
-:1007A000061A2C2800000002061A23480000002028
-:1007B000061A449000000124021A49240000000097
-:1007C000061A14280000000A061A14680000000621
-:1007D000061A154000000002041A15480005023CE4
-:1007E000061A155C00000009061A15D00000001456
-:1007F000061A0AE000000048061A08080000000275
-:10080000061A08580000000E041A1FB80002024120
-:10081000061A2C30000000020200A2800000000135
-:100820000200A294071D29110200A29800000000F6
-:100830000200A29C009C04240200A2A00000000070
-:100840000200A2A4000002090200A4FCFF000000B4
-:10085000020100B400000001020100B80000000124
-:10086000020100DC000000010201010000000001A3
-:1008700002010104000000010201007C00300000C0
-:1008800002010084000000280201008C000000002A
-:1008900002010130000000040201025C00000001BE
-:1008A000020103280000000002010554000000308E
-:1008B000020100C400000001020100CC00000001A0
-:1008C000020100F800000001020100F00000000138
-:1008D00002010080003000000201008800000028B2
-:1008E0000201009000000000020101340000000439
-:1008F000020102DC000000010201032C00000000E4
-:100900000201056400000030020100C8000000017F
-:10091000020100D000000001020100FC0000000103
-:10092000020100F400000001020C10000000002091
-:10093000020C200800000A11020C200C00000A0022
-:10094000020C201000000A04020C201C0000FFFF13
-:10095000020C20200000FFFF020C20240000FFFFFB
-:10096000020C20280000FFFF060C203800000002C7
-:10097000020C204000000034020C2044000000352E
-:10098000020C204800000020020C204C0000002136
-:10099000020C205000000022020C20540000002312
-:1009A000020C205800000024020C205C00000025EE
-:1009B000020C206000000026020C206400000027CA
-:1009C000020C206800000028020C206C00000029A6
-:1009D000020C20700000002A020C20740000002B82
-:1009E000060C207800000056020C21D00000000107
-:1009F000020C21D400000001020C21D800000001EB
-:100A0000020C21DC00000001020C21E000000001CA
-:100A1000020C21E400000001020C21E800000001AA
-:100A2000020C21EC00000001020C21F0000000018A
-:100A3000020C21F400000001060C21F80000001057
-:100A4000020C223807FFFFFF020C223C0000003F8F
-:100A5000020C224007FFFFFF020C22440000000F9F
-:100A6000010C224800000000010C224C0000000094
-:100A7000010C225000000000010C22540000000074
-:100A8000010C225800000000010C225C0000000054
-:100A9000010C226000000000010C22640000000034
-:100AA000010C226800000000010C226C0000000014
-:100AB000010C227000000000010C227400000000F4
-:100AC000010C227800000000010C227C00000000D4
-:100AD000020C24BC000000010C0C2000000003E804
-:100AE0000A0C2000000000010B0C20000000000A8E
-:100AF000020C400800000365020C400C0000035487
-:100B0000020C401000000358020C40140000037552
-:100B1000020C401C0000FFFF020C40200000FFFF01
-:100B2000020C40240000FFFF020C40280000FFFFE1
-:100B3000020C403800000046020C403C000000055A
-:100B4000060C40400000005E020C41B800000001AD
-:100B5000060C41BC0000001F020C423807FFFFFFDB
-:100B6000020C423C0000003F020C424007FFFFFF26
-:100B7000020C42440000000F010C4248000000003B
-:100B8000010C424C00000000010C4250000000002B
-:100B9000010C425400000000010C4258000000000B
-:100BA000010C425C00000000010C426000000000EB
-:100BB000010C426400000000010C426800000000CB
-:100BC000010C426C00000000010C427000000000AB
-:100BD000010C427400000000010C4278000000008B
-:100BE000010C427C00000000010C4280000000006B
-:100BF000020C44C0000000010C0C4000000003E89F
-:100C00000A0C4000000000010B0C40000000000A2C
-:100C1000020D004400000032020D008C021500207D
-:100C2000020D009002150020020D00940810000033
-:100C3000020D009800000033020D009C000000022D
-:100C4000020D00A000000000020D00A4000000053D
-:100C5000020D00A800000005060D00AC0000000217
-:100C6000020D00B400000002020D00B800000003F5
-:100C7000020D00BC00000002020D00C000000001D7
-:100C8000020D00C800000002020D00CC00000002AE
-:100C9000020D010800000001020D015C00000001CE
-:100CA000020D016400000001020D01680000000255
-:100CB000020D020400000001020D020C00000020E1
-:100CC000020D021000000040020D0214000000405E
-:100CD000020D022000000003020D02240000001893
-:100CE000060D028000000012040D030000240243E0
-:100CF000020D004C00000001020D00500000000237
-:100D0000020D005400000008020D00580000000809
-:100D1000060D005C00000004020D00C40000000489
-:100D2000020D011400000009020D01180000002945
-:100D3000020D011C0000000A020D01200000002A23
-:100D4000020D012400000007020D01280000002709
-:100D5000020D012C00000007020D013000000027E9
-:100D6000020D01340000000C020D01380000002CBF
-:100D7000020D013C0000000C020D01400000002C9F
-:100D8000020D01440000000C020D01480000002C7F
-:100D9000020D000400000001020D00080000000127
-:100DA000020D000C00000001020D00100000000107
-:100DB000020D001400000001020D001800000001E7
-:100DC000020D001C00000001020D002000000001C7
-:100DD000020D002400000001020D002800000001A7
-:100DE000020D002C00000001020D00300000000187
-:100DF000020D003400000001020D00380000000167
-:100E0000020D003C00000001020E004C0000003208
-:100E1000020E009402150020020E00980215002018
-:100E2000020E009C00000030020E00A0081000001E
-:100E3000020E00A400000033020E00A800000030E3
-:100E4000020E00AC00000031020E00B000000002F3
-:100E5000020E00B400000004020E00B80000000002
-:100E6000020E00BC00000002020E00C000000002E2
-:100E7000020E00C400000000020E00C800000002C4
-:100E8000020E00CC00000007020E00D0000000029D
-:100E9000020E00D400000002020E00D80000000183
-:100EA000020E00E400000001020E014400000001F7
-:100EB000020E014C00000001020E01500000000271
-:100EC000020E020400000001020E020C00000040AD
-:100ED000020E021000000040020E021C000000047E
-:100EE000020E022000000020020E02240000000E6C
-:100EF000020E02280000001B060E03000000001274
-:100F0000040E0280001B0267020E00540000000C59
-:100F1000020E005800000007020E005C0000000FE7
-:100F2000020E006000000010060E006400000004C5
-:100F3000020E00DC00000003020E01100000000F92
-:100F4000020E01140000002F020E01180000000E16
-:100F5000020E011C0000002E020E00040000000121
-:100F6000020E000800000001020E000C000000014B
-:100F7000020E001000000001020E0014000000012B
-:100F8000020E001800000001020E001C000000010B
-:100F9000020E002000000001020E002400000001EB
-:100FA000020E002800000001020E002C00000001CB
-:100FB000020E003000000001020E003400000001AB
-:100FC000020E003800000001020E003C000000018B
-:100FD000020E004000000001020E0044000000016B
-:100FE0000730040000C900000830076800130282BF
-:100FF00007340000341200000734800037B70D05B5
-:10100000073500002E7D1AF308356F405218028410
-:10101000013000000000000001300004000000006A
-:1010200001300008000000000130000C000000004A
-:10103000013000100000000001300014000000002A
-:1010400002300020000000010230002400000002F5
-:1010500002300028000000030230002C00000000D5
-:1010600002300030000000040230003400000001B3
-:1010700002300038000000000230003C0000000197
-:101080000230004000000004023000440000000074
-:1010900002300048000000010230004C0000000354
-:1010A0000230005000000000023000540000000137
-:1010B00002300058000000040230005C0000000014
-:1010C00002300060000000010230006400000003F4
-:1010D00002300068000000000230006C00000001D7
-:1010E00002300070000000040230007400000000B4
-:1010F00002300078000000040230007C0000000391
-:101100000630008000000002023000A400003FFF13
-:10111000023000A8000003FF02300224000000009B
-:1011200002300234000000000230024C00000000D7
-:10113000023002E40000FFFF06302000000008003B
-:1011400002338BC000000001023380000000001A4F
-:10115000023380400000004E023380800000001007
-:10116000023380C0000000200C3383000007A12060
-:101170000A338300000001380B338300000013881A
-:10118000023383C0000001F40C3383801DCD650061
-:101190000A3383800004C4B40B338380004C4B407B
-:1011A00006321AA0000000C206321020000000C85B
-:1011B0000632100000000002063214000000004059
-:1011C00006325098000000040632508000000005EE
-:1011D00004325094000102860632500000000020C4
-:1011E00004322830000202870233080001000000A8
-:1011F00004330C00001002890233080000000000D4
-:1012000004330C400010029906321500000000B4AF
-:1012100002321DC80000000006324000000000D865
-:10122000063217D0000000B402321DCC00000000CE
-:1012300006324360000000D807200400009200003E
-:1012400008200780001002A9072400002CCF00000E
-:10125000072480002AE50B340824DC6062DA02AB44
-:101260000120000000000000012000040000000038
-:1012700001200008000000000120000C0000000018
-:1012800001200010000000000120001400000000F8
-:1012900002200020000000010220002400000002C3
-:1012A00002200028000000030220002C00000000A3
-:1012B0000220003000000004022000340000000181
-:1012C00002200038000000000220003C0000000165
-:1012D0000220004000000004022000440000000042
-:1012E00002200048000000010220004C0000000322
-:1012F0000220005000000000022000540000000105
-:1013000002200058000000040220005C00000000E1
-:1013100002200060000000010220006400000003C1
-:1013200002200068000000000220006C00000001A4
-:101330000220007000000004022000740000000081
-:1013400002200078000000040220007C000000035E
-:101350000620008000000002022000A400003FFFE1
-:10136000022000A8000003FF022002240000000069
-:1013700002200234000000000220024C00000000A5
-:10138000022002E40000FFFF062020000000080009
-:1013900002238BC000000001022380000000001027
-:1013A00002238040000000120223808000000030F1
-:1013B000022380C00000000E022383C0000001F45D
-:1013C000062250000000004206221020000000C843
-:1013D000062210000000000206222000000000C0CB
-:1013E000062225C00000024004222EC8000802ADDB
-:1013F00002230800013FFFFF04230C00001002B588
-:10140000022308000000000004230C40001002C565
-:1014100006223040000000A00622354000000010E7
-:10142000062236C000000030062240000000020004
-:10143000062235C00000002006223840000000309F
-:1014400006223000000000080222511800000000AF
-:10145000062223000000000E0622241000000030A7
-:10146000062232C0000000A00622358000000010D5
-:1014700006223780000000300622480000000200EB
-:10148000062236400000002006223900000000300D
-:1014900006223020000000080222511C000000003B
-:1014A000062223380000000E062224D0000000305F
-:1014B00002161000000000280217000800000002B9
-:1014C0000217002C000000030217003C000000047B
-:1014D0000217004400000008021700480000000244
-:1014E0000217004C0000009002170050000000900E
-:1014F00002170054008000900217005808140000E2
-:10150000021700600000008A0217006400000080DB
-:1015100002170068000000810217006C00000080C4
-:10152000021700700000000602170078000007D0C4
-:101530000217007C0000076C02170038007C1004C2
-:10154000021700040000000F0616402400000002ED
-:10155000021640700000001C021642080000000144
-:101560000216421000000001021642200000000195
-:10157000021642280000000102164230000000015D
-:10158000021642380000000102164260000000010D
-:101590000C16401C0003D0900A16401C0000009C52
-:1015A0000B16401C000009C4021640300000000861
-:1015B000021640340000000C0216403800000010F3
-:1015C0000216404400000020021640000000000106
-:1015D000021640D800000001021640080000000179
-:1015E0000216400C0000000102164010000000012D
-:1015F00002164240000000000216424800000000AF
-:101600000616427000000002021642500000000060
-:101610000216425800000000061642800000000238
-:1016200002166008000006140216600C0000060096
-:1016300002166010000006040216601C0000FFFF86
-:10164000021660200000FFFF021660240000FFFF6A
-:10165000021660280000FFFF02166038000000201C
-:101660000216603C000000200216604000000034BA
-:101670000216604400000035021660480000002396
-:101680000216604C00000024021660500000002585
-:101690000216605400000026021660580000002761
-:1016A0000216605C00000029021660600000002A3B
-:1016B000021660640000002B021660680000002C17
-:1016C0000216606C0000002D0616607000000052CB
-:1016D000021661B800000001061661BC0000001F80
-:1016E0000216623807FFFFFF0216623C0000003F4F
-:1016F0000216624007FFFFFF021662440000000F5F
-:1017000001166248000000000116624C0000000053
-:101710000116625000000000011662540000000033
-:1017200001166258000000000116625C0000000013
-:1017300001166260000000000116626400000000F3
-:1017400001166268000000000116626C00000000D3
-:1017500001166270000000000116627400000000B3
-:1017600001166278000000000116627C0000000093
-:10177000021664BC000000010C166000000003E8C3
-:101780000A166000000000010B1660000000000A4D
-:10179000021680400000000602168044000000058A
-:1017A000021680480000000A0216804C0000000566
-:1017B0000216805400000002021680CC00000004D3
-:1017C000021680D000000004021680D4000000043D
-:1017D000021680D800000004021680DC000000041D
-:1017E000021680E000000004021680E400000004FD
-:1017F000021680E8000000040216880400000004BD
-:10180000021680300000007C021680340000003D8B
-:10181000021680380000003F0216803C0000009C49
-:10182000021680F000000007061680F40000000594
-:101830000216880C01010101021681080000000057
-:101840000216810C00000004021681100000000442
-:1018500002168114000000020216881008012004FC
-:1018600002168118000000050216811C0000000508
-:1018700002168120000000050216812400000005E8
-:101880000216882C2008100102168128000000088A
-:101890000216812C000000060216813000000007AD
-:1018A0000216813400000000021688300101012078
-:1018B0000616813800000004021688340101010177
-:1018C0000616814800000004021688380101010153
-:1018D00006168158000000040216883C010101012F
-:1018E00006168168000000030216817400000001E2
-:1018F00002168840010101010216817800000001F2
-:101900000216817C000000010216818000000001A7
-:1019100002168184000000010216884401010101C1
-:1019200002168188000000010216818C000000046C
-:10193000021681900000000402168194000000024B
-:10194000021688480801200402168198000000054C
-:101950000216819C00000005021681A0000000050F
-:10196000021681A400000005021688142008100148
-:10197000021681A800000008021681AC00000006D3
-:10198000021681B000000007021681B400000001B9
-:101990000216881801010120021681B8000000011A
-:1019A000021681BC00000001021681C00000000187
-:1019B000021681C4000000010216881C0101010109
-:1019C000021681C800000001021681CC000000014F
-:1019D000021681D000000001021681D4000000012F
-:1019E0000216882001010101021681D800000001C1
-:1019F000021681DC00000001021681E000000001F7
-:101A0000021681E400000001021688240101010190
-:101A1000021681E800000001021681EC00000001BE
-:101A2000021681F000000001021688280101010160
-:101A300002168240FFFF003F0616824400000002AB
-:101A40000216824CFFFF003F021682500000010088
-:101A5000021682540000010006168258000000029F
-:101A600002168260000000C002168264000000C0FE
-:101A70000216826800001E000216826C00001E0022
-:101A800002168270000040000216827400004000BE
-:101A900002168278000080000216827C000080001E
-:101AA00002168280000020000216828400002000BE
-:101AB0000616828800000007021682A400000001BA
-:101AC000061682A80000000A021681F400000C0825
-:101AD000021681F800000040021681FC000001009F
-:101AE0000216820000000020021682040000001787
-:101AF00002168208000000800216820C000002001C
-:101B0000021682100000000002168218FFFF01FF7B
-:101B100002168214FFFF01FF0216823C0000001330
-:101B2000021680900000013F021680600000014014
-:101B30000216806400000140061680680000000262
-:101B400002168070000000C00616807400000007B6
-:101B50000216809C00000048021680A00000004889
-:101B6000061680A400000002021680AC00000048A7
-:101B7000061680B0000000070216823800008000C0
-:101B800002168234000025E40216809400007FFFD4
-:101B900002168220000000070216821C00000007C7
-:101BA000021682280000000002168224FFFFFFFFB9
-:101BB00002168230000000000216822CFFFFFFFF99
-:101BC000021680EC000000FF02140000000000017B
-:101BD0000214000C0000000102140040000000018B
-:101BE0000214004400007FFF0214000C00000000FB
-:101BF00002140000000000000214006C000000004D
-:101C00000214000400000001021400300000000172
-:101C100002140004000000000214005C0000000038
-:101C2000021400080000000102140034000000014A
-:101C30000214000800000000021400600000000010
-:101C40000202005800000032020200A0031500202A
-:101C5000020200A403150020020200A801000030C7
-:101C6000020200AC08100000020200B000000033C5
-:101C7000020200B400000030020200B8000000318F
-:101C8000020200BC00000003020200C000000006C7
-:101C9000020200C400000003020200C800000003AA
-:101CA000020200CC00000002020200D0000000008E
-:101CB000020200D400000002020200DC000000006A
-:101CC000020200E000000006020200E4000000043E
-:101CD000020200E800000002020200EC0000000224
-:101CE000020200F000000001020200FC00000006F9
-:101CF0000202012000000000020201340000000284
-:101D0000020201B0000000010202020C000000010A
-:101D10000202021400000001020202180000000288
-:101D200002020404000000010202040C0000004052
-:101D300002020410000000400202041C0000000423
-:101D4000020204200000002002020424000000021D
-:101D5000020204280000001F060205000000001215
-:101D600004020480001F02D5020200600000000F80
-:101D70000202006400000007020200680000000B7D
-:101D80000202006C0000000E060200700000000459
-:101D9000020200F40000000402020004000000013E
-:101DA00002020008000000010202000C0000000115
-:101DB00002020010000000010202001400000001F5
-:101DC00002020018000000010202001C00000001D5
-:101DD00002020020000000010202002400000001B5
-:101DE00002020028000000010202002C0000000195
-:101DF0000202003000000001020200340000000175
-:101E000002020038000000010202003C0000000154
-:101E10000202004000000001020200440000000134
-:101E200002020048000000010202004C0000000114
-:101E3000020200500000000102020108000000C878
-:101E40000202011800000002020201C400000000AA
-:101E5000020201CC00000000020201D400000002D6
-:101E6000020201DC00000002020201E4000000FFA7
-:101E7000020201EC000000FF0202010C000000C899
-:101E80000202011C00000002020201C80000000062
-:101E9000020201D000000000020201D8000000028E
-:101EA000020201E000000002020201E8000000FF5F
-:101EB000020201F0000000FF0728040000B4000047
-:101EC00008280768001302F4072C000035D700002B
-:101ED000072C80003A590D76072D00003B741C0D2D
-:101EE000072D8000226C2AEB082DC6F0472202F64F
-:101EF000012800000000000001280004000000008C
-:101F000001280008000000000128000C000000006B
-:101F1000012800100000000001280014000000004B
-:101F20000228002000000001022800240000000216
-:101F300002280028000000030228002C00000000F6
-:101F400002280030000000040228003400000001D4
-:101F500002280038000000000228003C00000001B8
-:101F60000228004000000004022800440000000095
-:101F700002280048000000010228004C0000000375
-:101F80000228005000000000022800540000000158
-:101F900002280058000000040228005C0000000035
-:101FA0000228006000000001022800640000000315
-:101FB00002280068000000000228006C00000001F8
-:101FC00002280070000000040228007400000000D5
-:101FD00002280078000000040228007C00000003B2
-:101FE0000628008000000002022800A400003FFF35
-:101FF000022800A8000003FF0228022400000000BD
-:1020000002280234000000000228024C00000000F8
-:10201000022802E40000FFFF06282000000008005C
-:10202000022B8BC000000001022B8000000000008A
-:10203000022B804000000018022B80800000000C62
-:10204000022B80C0000000660C2B83000007A1203B
-:102050000A2B8300000001380B2B8300000013883B
-:10206000022B83C0000001F40C2B8340000001F41C
-:102070000A2B8340000000000B2B8340000000056A
-:102080000A2B83800004C4B40C2B83801DCD650013
-:102090000B2B8380004C4B40062A3C400000000480
-:1020A000042A3C50000202F8062A300000000048D2
-:1020B000062A1020000000C8062A100000000002B6
-:1020C000062A31280000008E022A33680000000032
-:1020D000042A3370000202FA042A3A70000402FC57
-:1020E000042A3D0000020300042A15000002030236
-:1020F000062A150800000100022A197000000000DD
-:10210000022A197800000000042A19600002030462
-:10211000062A4AC000000002062A4B000000000404
-:10212000042A1F4800020306022B080000000000DA
-:10213000042B0C0000100308022B08000100000013
-:10214000042B0C4000080318022B080002000000BA
-:10215000042B0C6000080320062A3A8000000014BB
-:10216000062A3B2000000024062A14000000000A72
-:10217000062A145000000006062A3378000000D812
-:10218000022A3A3800000000042A3C5800020328C2
-:10219000042A3C680010032A062A5020000000028E
-:1021A000062A503000000002062A500000000002FB
-:1021B000062A501000000002022A504000000000D1
-:1021C000062A50480000000E022A50B80000000104
-:1021D000042A4AC80002033A062A4B1000000042B3
-:1021E000062A4D2000000004062A3AD00000001400
-:1021F000062A3BB000000024062A14280000000A2A
-:10220000062A146800000006062A36D8000000D806
-:10221000022A3A3C00000000042A3C600002033C11
-:10222000042A3CA80010033E062A502800000002A1
-:10223000062A503800000002062A5008000000025A
-:10224000062A501800000002022A50440000000034
-:10225000062A50800000000E022A50BC0000000137
-:10226000042A4AD00002034E062A4C1800000042FD
-:10227000062A4D3000000004021010080000000182
-:102280000210101000000264021010000003D000C1
-:10229000021010040000003D091018000200035055
-:1022A00009101100002005500610118000000002E6
-:1022B0000910118800060570061011A00000001812
-:1022C000021010100000000006102400000000E0C2
-:1022D0000210201C0000000002102020000000015D
-:1022E000021020C0000000010210200400000001C4
-:1022F000021020080000000109103C0000050576CE
-:1023000009103C200005057B0910380000050580F8
-:1023100002104028000000100210404400003FFF5F
-:102320000210405800280000021040840084924AA5
-:1023300002104058000000000610806800000004F1
-:1023400002108000000010800610802800000002AB
-:102350000210803800000010021080400000FFFFD3
-:10236000021080440000FFFF0210805000000000B7
-:102370000210810000000000061081200000000211
-:1023800002108008000002B502108010000000005A
-:10239000061082000000004A021081080001FFFFC1
-:1023A00006108140000000020210800000001A8028
-:1023B0000610900000000024061091200000004A42
-:1023C000061093700000004A061095C00000004AF5
-:1023D000021080040000108006108030000000020F
-:1023E0000210803C00000010021080480000FFFF37
-:1023F0000210804C0000FFFF02108054000000001B
-:102400000210810400000000061081280000000274
-:102410000210800C000002B50210801400000000C1
-:10242000061084000000004A0210810C0001FFFF2A
-:1024300006108148000000020210800400001A808B
-:102440000610909000000024061092480000004AF8
-:10245000061094980000004A061096E80000004A12
-:102460000212049000E383400212051400003C10A5
-:10247000021205200000000202120494FFFFFFFF79
-:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
-:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
-:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
-:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
-:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
-:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
-:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
-:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
-:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
-:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
-:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
-:10253000021204FCFFFFFFFF02120500FFFFFFFF76
-:1025400002120504FFFFFFFF02120508FFFFFFFF55
-:102550000212050CFFFFFFFF02120510FFFFFFFF35
-:10256000021204D4FFFF3330021204D8FFFF3340BD
-:10257000021204B4F00030000212039000000008C0
-:102580000212039C00000008061203A000000002D3
-:10259000021203BC00000004021203C40000000485
-:1025A000021203D000000000021203DC0000000051
-:1025B0000212036C00000001021203680000003FD9
-:1025C000021201BC00000040021201C00000180805
-:1025D000021201C400000803021201C8000008032F
-:1025E000021201CC00000040021201D000000003E2
-:1025F000021201D400000803021201D800000803EF
-:10260000021201DC00000803021201E000010003D5
-:10261000021201E400000803021201E800000803AE
-:10262000021201EC00000003021201F0000000039E
-:10263000021201F400000003021201F8000000037E
-:10264000021201FC0000000302120200000000035D
-:10265000021202040000000302120208000000033C
-:102660000212020C0000000302120210000000031C
-:1026700002120214000000030212021800000003FC
-:102680000212021C000000030212022000000003DC
-:102690000212022400000003021202280000240398
-:1026A0000212022C0000002F02120230000000096A
-:1026B00002120234000000190212023800000184E4
-:1026C0000212023C000001830212024000000306D5
-:1026D0000212024400000019021202480000000623
-:1026E0000212024C00000306021202500000030610
-:1026F00002120254000003060212025800000C8667
-:102700000212025C000003060212026000000306CF
-:1027100002120264000000060212026800000006B5
-:102720000212026C00000006021202700000000695
-:102730000212027400000006021202780000000675
-:102740000212027C00000006021202800000000655
-:102750000212028400000006021202880000000635
-:102760000212028C00000006021202900000000615
-:1027700002120294000000060212029800000006F5
-:102780000212029C00000006021202A000000306D2
-:10279000021202A400000013021202A800000006A8
-:1027A000021202B000001004021202B40000100471
-:1027B0000212032400106440021203280010644037
-:1027C000021201B0000000010600A0000000001687
-:1027D0000200A06CBF5C00000200A070FFF51FEFBC
-:1027E0000200A0740000FFFF0200A078500003E088
-:1027F0000200A07C000000000200A0800000A000F9
-:102800000600A084000000050200A0980FE0000070
-:102810000600A09C000000140200A0EC555400002B
-:102820000200A0F0555555550200A0F40000555582
-:102830000200A0F8000000000200A0FC55540000B7
-:102840000200A100555555550200A1040000555540
-:102850000200A108000000000200A22C00000000FD
-:102860000600A230000000030200A0600000000784
-:102870000200A10CBF5C00000200A110FFF51FEFD9
-:102880000200A1140000FFFF0200A118500003E0A5
-:102890000200A11C000000000200A1200000A00016
-:1028A0000600A124000000050200A1380FE000008E
-:1028B0000600A13C000000140200A18C5554000049
-:1028C0000200A190555555550200A19400005555A0
-:1028D0000200A198000000000200A19C55540000D5
-:1028E0000200A1A0555555550200A1A40000555560
-:1028F0000200A1A8000000000200A23C00000000AD
-:102900000600A240000000030200A06400000007CF
-:1029100000000000000000000000002E0000000089
-:1029200000000000000000000000000000000000A7
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000000000087
-:102950000000000000000000000000000000000077
-:102960000000000000000000000000000000000067
-:10297000002E0050000000000000000000000000D9
-:102980000000000000000000000000000000000047
-:102990000000000000000000000000000050008D5A
-:1029A0000000000000000000000000000000000027
-:1029B0000000000000000000000000000000000017
-:1029C0000000000000000000008D009200920096C0
-:1029D0000096009A000000000000000000000000C7
-:1029E00000000000000000000000000000000000E7
-:1029F00000000000009A00DB00DB00E900E900F7BE
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A80000000000000000000000000000000000046
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD00000F700FE00000000000000000000000001
-:102AE00000000000000000000000000000000000E6
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B2000000000000000000000FE01030103010E90
-:102B3000010E01190000000000000000000000006C
-:102B40000000000000000000000000000000000085
-:102B50000000000000000000000000000000000075
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000119011A00000000000000000000000010
-:102B90000000000000000000000000000000000035
-:102BA000000000000000000000000000011A0152B7
-:102BB0000000000000000000000000000000000015
-:102BC0000000000000000000000000000000000005
-:102BD000000000000000000001520176000000002B
-:102BE00000000000000000000000000000000000E5
-:102BF00000000000000000000000000000000000D5
-:102C000000000000017601B5000000000000000097
-:102C100000000000000000000000000000000000B4
-:102C200000000000000000000000000000000000A4
-:102C300001B501F0000000000000000000000000ED
-:102C40000000000000000000000000000000000084
-:102C500000000000000000000000000001F002354C
-:102C6000023502380238023B00000000000000007C
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000023B02760276028095
-:102C90000280028A00000000000000000000000026
-:102CA0000000000000000000000000000000000024
-:102CB00000000000028A028B0000000000000000FB
-:102CC0000000000000000000000000000000000004
-:102CD00000000000000000000000000000000000F4
-:102CE000028B029D000000000000000000000000B8
-:102CF00000000000000000000000000000000000D4
-:102D0000000000000000000000000000029D02B270
-:102D100002B202B502B502B80000000000000000D7
-:102D200000000000000000000000000000000000A3
-:102D3000000000000000000002B802E600000000F1
-:102D40000000000000000000000000000000000083
-:102D50000000000000000000000000000000000073
-:102D60000000000002E6036D00000000000000000B
-:102D70000000000000000000000000000000000053
-:102D80000000000000000000000000000000000043
-:102D9000036D0374037403780378037C0000000060
-:102DA0000000000000000000000000000000000023
-:102DB000000000000000000000000000037C03BBD6
-:102DC00003BB03C303C303CB0000000000000000EB
-:102DD00000000000000000000000000000000000F3
-:102DE000000000000000000003CB041F041F04319A
-:102DF0000431044300000000000000000000000057
-:102E000000000000000000000000000000000000C2
-:102E1000000000000443044D00000000000000001A
-:102E200000000000000000000000000000000000A2
-:102E30000000000000000000000000000000000092
-:102E4000044D0453000000000000000000000000DA
-:102E50000000000000000000000000000000000072
-:102E600000000000000000000000000004530456B1
-:102E70000000000000000000000000000000000052
-:102E80000000000000000000000000000000000042
-:102E900000000000000000000456045B0000000079
-:102EA0000000000000000000000000000000000022
-:102EB0000000000000000000000000000000000012
-:102EC00000000000045B045C045C046E046E04807B
-:102ED00000000000000000000000000000000000F2
-:102EE00000000000000000000000000000000000E2
-:102EF000048004ED0000000000000000000000005D
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000004ED04EECE
-:102F200004EE050205020516000000000000000086
-:102F30000000000000000000000000000000000091
-:102F40000000000000000000000000000000000081
-:102F50000000000000000000000000000000000071
-:102F60000000000000000000000000000000000061
-:102F70000000000000000000000000000000000051
-:102F80000000000000000000000000000000000041
-:102F90000000000000000000000000000000000031
-:102FA000000000000000000000010000000204C05A
-:102FB0000003098000040E4000051300000617C03E
-:102FC00000071C800008214000092600000A2AC0D2
-:102FD000000B2F80000C3440000D3900000E3DC066
-:102FE000000F42800010474000114C00001250C0FA
-:102FF0000013558000145A4000155F00001663C08E
-:103000000017688000186D4000197200001A76C021
-:10301000001B7B80001C8040001D8500001E89C0B5
-:10302000001F8E8000209340000020000000400020
-:1030300000006000000080000000A0000000C00050
-:103040000000E0000001000000012000000140003D
-:1030500000016000000180000001A0000001C0002C
-:103060000001E00000020000000220000002400019
-:1030700000026000000280000002A0000002C00008
-:103080000002E000000300000003200000034000F5
-:1030900000036000000380000003A0000003C000E4
-:1030A0000003E000000400000004200000044000D1
-:1030B00000046000000480000004A0000004C000C0
-:1030C0000004E000000500000005200000054000AD
-:1030D00000056000000580000005A0000005C0009C
-:1030E0000005E00000060000000620000006400089
-:1030F00000066000000680000006A0000006C00078
-:103100000006E00000070000000720000007400064
-:1031100000076000000780000007A0000007C00053
-:103120000007E00000080000000820000008400040
-:1031300000086000000880000008A0000008C0002F
-:103140000008E0000009000000092000000940001C
-:1031500000096000000980000009A0000009C0000B
-:103160000009E000000A0000000A2000000A4000F8
-:10317000000A6000000A8000000AA000000AC000E7
-:10318000000AE000000B0000000B2000000B4000D4
-:10319000000B6000000B8000000BA000000BC000C3
-:1031A000000BE000000C0000000C2000000C4000B0
-:1031B000000C6000000C8000000CA000000CC0009F
-:1031C000000CE000000D0000000D2000000D40008C
-:1031D000000D6000000D8000000DA000000DC0007B
-:1031E000000DE000000E0000000E2000000E400068
-:1031F000000E6000000E8000000EA000000EC00057
-:10320000000EE000000F0000000F2000000F400043
-:10321000000F6000000F8000000FA000000FC00032
-:10322000000FE0000010000000102000001040001F
-:1032300000106000001080000010A0000010C0000E
-:103240000010E000001100000011200000114000FB
-:1032500000116000001180000011A0000011C000EA
-:103260000011E000001200000012200000124000D7
-:1032700000126000001280000012A0000012C000C6
-:103280000012E000001300000013200000134000B3
-:1032900000136000001380000013A0000013C000A2
-:1032A0000013E0000014000000142000001440008F
-:1032B00000146000001480000014A0000014C0007E
-:1032C0000014E0000015000000152000001540006B
-:1032D00000156000001580000015A0000015C0005A
-:1032E0000015E00000160000001620000016400047
-:1032F00000166000001680000016A0000016C00036
-:103300000016E00000170000001720000017400022
-:1033100000176000001780000017A0000017C00011
-:103320000017E000001800000018200000184000FE
-:1033300000186000001880000018A0000018C000ED
-:103340000018E000001900000019200000194000DA
-:1033500000196000001980000019A0000019C000C9
-:103360000019E000001A0000001A2000001A4000B6
-:10337000001A6000001A8000001AA000001AC000A5
-:10338000001AE000001B0000001B2000001B400092
-:10339000001B6000001B8000001BA000001BC00081
-:1033A000001BE000001C0000001C2000001C40006E
-:1033B000001C6000001C8000001CA000001CC0005D
-:1033C000001CE000001D0000001D2000001D40004A
-:1033D000001D6000001D8000001DA000001DC00039
-:1033E000001DE000001E0000001E2000001E400026
-:1033F000001E6000001E8000001EA000001EC00015
-:10340000001EE000001F0000001F2000001F400001
-:10341000001F6000001F8000001FA000001FC000F0
-:10342000001FE000002000000020200000204000DD
-:1034300000206000002080000020A0000020C000CC
-:103440000020E000002100000021200000214000B9
-:1034500000216000002180000021A0000021C000A8
-:103460000021E00000220000002220000022400095
-:1034700000226000002280000022A0000022C00084
-:103480000022E00000230000002320000023400071
-:1034900000236000002380000023A0000023C00060
-:1034A0000023E0000024000000242000002440004D
-:1034B00000246000002480000024A0000024C0003C
-:1034C0000024E00000250000002520000025400029
-:1034D00000256000002580000025A0000025C00018
-:1034E0000025E00000260000002620000026400005
-:1034F00000266000002680000026A0000026C000F4
-:103500000026E000002700000027200000274000E0
-:1035100000276000002780000027A0000027C000CF
-:103520000027E000002800000028200000284000BC
-:1035300000286000002880000028A0000028C000AB
-:103540000028E00000290000002920000029400098
-:1035500000296000002980000029A0000029C00087
-:103560000029E000002A0000002A2000002A400074
-:10357000002A6000002A8000002AA000002AC00063
-:10358000002AE000002B0000002B2000002B400050
-:10359000002B6000002B8000002BA000002BC0003F
-:1035A000002BE000002C0000002C2000002C40002C
-:1035B000002C6000002C8000002CA000002CC0001B
-:1035C000002CE000002D0000002D2000002D400008
-:1035D000002D6000002D8000002DA000002DC000F7
-:1035E000002DE000002E0000002E2000002E4000E4
-:1035F000002E6000002E8000002EA000002EC000D3
-:10360000002EE000002F0000002F2000002F4000BF
-:10361000002F6000002F8000002FA000002FC000AE
-:10362000002FE0000030000000302000003040009B
-:1036300000306000003080000030A0000030C0008A
-:103640000030E00000310000003120000031400077
-:1036500000316000003180000031A0000031C00066
-:103660000031E00000320000003220000032400053
-:1036700000326000003280000032A0000032C00042
-:103680000032E0000033000000332000003340002F
-:1036900000336000003380000033A0000033C0001E
-:1036A0000033E0000034000000342000003440000B
-:1036B00000346000003480000034A0000034C000FA
-:1036C0000034E000003500000035200000354000E7
-:1036D00000356000003580000035A0000035C000D6
-:1036E0000035E000003600000036200000364000C3
-:1036F00000366000003680000036A0000036C000B2
-:103700000036E0000037000000372000003740009E
-:1037100000376000003780000037A0000037C0008D
-:103720000037E0000038000000382000003840007A
-:1037300000386000003880000038A0000038C00069
-:103740000038E00000390000003920000039400056
-:1037500000396000003980000039A0000039C00045
-:103760000039E000003A0000003A2000003A400032
-:10377000003A6000003A8000003AA000003AC00021
-:10378000003AE000003B0000003B2000003B40000E
-:10379000003B6000003B8000003BA000003BC000FD
-:1037A000003BE000003C0000003C2000003C4000EA
-:1037B000003C6000003C8000003CA000003CC000D9
-:1037C000003CE000003D0000003D2000003D4000C6
-:1037D000003D6000003D8000003DA000003DC000B5
-:1037E000003DE000003E0000003E2000003E4000A2
-:1037F000003E6000003E8000003EA000003EC00091
-:10380000003EE000003F0000003F2000003F40007D
-:10381000003F6000003F8000003FA000003FC0006C
-:10382000003FE000003FE00100000000000001FF59
-:103830000000020000007FF800007FF80000026F27
-:1038400000001500000000010000000300BEBC20C5
-:103850000000000300BEBC2000000001FFFFFFFFCE
-:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
-:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
-:1038800000000000FFFFFFFF00000000FFFFFFFF40
-:103890000000000300BEBC20FFFFFFFF000000008F
-:1038A000FFFFFFFF00000000FFFFFFFF000000031D
-:1038B00000BEBC2000002000000040C0000061806D
-:1038C000000082400000A3000000C3C00000E480AC
-:1038D0000001054000012600000146C0000167808C
-:1038E000000188400001A9000001C9C00001EA8070
-:1038F00000020B4000022C0000024CC000026D8050
-:1039000000028E400002AF000002CFC00002F08033
-:103910000003114000033200000352C00003738013
-:10392000000394400003B5000003D5C00003F680F7
-:103930000004174000043800000458C000047980D7
-:1039400000049A400000800000010380000187000D
-:1039500000020A8000028E0000031180000395001F
-:103960000004188000049C0000051F800005A300CF
-:10397000000626800006AA0000072D800007B1007F
-:10398000000834800008B80000093B800009BF002F
-:10399000000A4280000AC600000B4980000BCD00DF
-:1039A000000C5080000CD400000D5780000DDB008F
-:1039B00000007FF800007FF800000174000015008F
-:1039C0000000190000000000FFFFFFFF40000000A2
-:1039D00040000000400000004000000040000000E7
-:1039E00040000000400000004000000040000000D7
-:1039F00040000000400000004000000040000000C7
-:103A000040000000400000004000000040000000B6
-:103A100040000000400000004000000040000000A6
-:103A20004000000040000000400000004000000096
-:103A30004000000040000000400000004000000086
-:103A400040000000400000004000000000007FF83F
-:103A500000007FF80000050900003500FFFFFFFFB0
-:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
-:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
-:103A80004000000040000000400000004000000036
-:103A90004000000040000000400000004000000026
-:103AA0004000000040000000400000004000000016
-:103AB0004000000040000000400000004000000006
-:103AC00040000000400000004000000040000000F6
-:103AD00040000000400000004000000040000000E6
-:103AE00040000000400000004000000040000000D6
-:103AF00040000000400000004000000000001000F6
-:103B000000002080000031000000418000005200D1
-:103B100000006280000073000000838000009400B9
-:103B20000000A4800000B5000000C5800000D600A1
-:103B30000000E6800000F700000107800001180087
-:103B400000012880000139000001498000015A006D
-:103B500000016A8000017B0000018B8000019C0055
-:103B60000001AC800001BD000001CD800001DE003D
-:103B70000001EE800001FF0000007FF800007FF8E8
-:103B8000000004480000150010000000000028ADEF
-:103B9000000000000001000100150005CCCCCCC1E4
-:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
-:103BB0000000000000000001CCCC0201CCCCCCCC39
-:103BC00000000000FFFFFFFF400000004000000079
-:103BD00040000000400000004000000040000000E5
-:103BE00040000000400000004000000040000000D5
-:103BF00040000000400000004000000040000000C5
-:103C000040000000400000004000000040000000B4
-:103C100040000000400000004000000040000000A4
-:103C20004000000040000000400000004000000094
-:103C30004000000040000000400000004000000084
-:103C40004000000040000000000E01B7011600D641
-:103C50000000FFFF000000000000FFFF0000000068
-:103C60000000FFFF000000000000FFFF0000000058
-:103C70000000FFFF000000000000FFFF0000000048
-:103C80000000FFFF000000000000FFFF0000000038
-:103C90000010000000000000007201BB012300F3CF
-:103CA0000000FFFF000000000000FFFF0000000018
-:103CB0000000FFFF000000000000FFFF0000000008
-:103CC0000000FFFF000000000000FFFF00000000F8
-:103CD0000000FFFF000000000000FFFF00000000E8
-:103CE0000010000000000000FFFFFFF3318FFFFF16
-:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
-:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
-:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
-:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
-:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
-:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
-:103D50000C30C305C30C30C3CF300014F3CF3CF399
-:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
-:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
-:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
-:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
-:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
-:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
-:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
-:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
-:103DE0000040CF3CCDCDCDCDFFFFFFF3310FFFFF26
-:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
-:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
-:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
-:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
-:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
-:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
-:103E50000C30C305C30C30C3CF300014F3CF3CF398
-:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
-:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
-:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
-:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
-:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
-:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
-:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
-:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
-:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
-:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
-:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
-:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
-:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
-:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
-:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
-:103F50000C30C305C30C30C3CF300014F3CF3CF397
-:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
-:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
-:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
-:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
-:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
-:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
-:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
-:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
-:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
-:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
-:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
-:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
-:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
-:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
-:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
-:104050000C30C305C30C30C3CF300014F3CF3CF396
-:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
-:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
-:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
-:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
-:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
-:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
-:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
-:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
-:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
-:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
-:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
-:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
-:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
-:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
-:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
-:104150000C30C305C30C30C3CF300014F3CF3CF395
-:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
-:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
-:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
-:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
-:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
-:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
-:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
-:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
-:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
-:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
-:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
-:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
-:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
-:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
-:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
-:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
-:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
-:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
-:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
-:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
-:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
-:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
-:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
-:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
-:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
-:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
-:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
-:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
-:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
-:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
-:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
-:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
-:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
-:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
-:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
-:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
-:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
-:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
-:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
-:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
-:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
-:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
-:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
-:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
-:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
-:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
-:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
-:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
-:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
-:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
-:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
-:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
-:1044E0000040CF3CCDCDCDCD000C0000000700C07A
-:1044F00000028130000B81580002021000010230DE
-:10450000000F024000010330000800000008008096
-:1045100000028100000B8128000201E0000102007E
-:104520000007021000020280000F0000000800F0E7
-:1045300000028170000B819800020250000102709D
-:10454000000B828000080338001000000008010002
-:1045500000028180000B81A80002026000018280BD
-:10456000000E82980008038000028000000B802863
-:10457000000200E0000101000000811000000118AD
-:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
-:1045B000CCCCCCCCCCCCCCCC00002000000000007B
-:1045C0001F8B080000000000000BFB51CFC0F00360
-:1045D0008A7BD81818367020F843015F646260B88F
-:1045E0000CC45781588099812198918121849178B8
-:1045F000FD49A208F62B210606316106866841A016
-:10460000B9C208F1A3403556220C0C7FA1628D403F
-:10461000369B2875DC3FD0789314A6D87A09047BA2
-:1046200033167964BC054D9E4F1295BF9580FE816F
-:10463000C68F1551F9620A103A1F2AFE044D5E1CFE
-:104640002A7F19EAAFA78AD8CDBD02950700C8E92D
-:10465000674460030000000000000000000000004C
-:104660001F8B080000000000000BED7D0B7854D577
-:10467000B5F03E73CE9C9949662627214F1E6112E4
-:1046800020828638BC0228BD4E0844AC5C0DF8423E
-:104690008B3ABC43DE50B4B4B55F2610224F6FF0A6
-:1046A00047452FD8E161458B3660A4D1021D4010EB
-:1046B0007BBDB7C1528BD5FA4554500C24728BD2B6
-:1046C0005B7BFDD75A7BEFCC39930960FFF6FEF791
-:1046D000BFDF1F3FBFC33E673FD65EAFBDD6DA6BBD
-:1046E000EFB1B334A60F64EC6BFCBB81B11A1B6352
-:1046F000F0AAFBF9949DDD5FEA662C6FA36FB93BCE
-:1047000015DEB7E6EC4AF43196B577BD3211DE67B7
-:104710006D6A5266E747DB8F76C1C731F0BE75BD63
-:104720005204EFB3DE6C5266E1D361636D509F6952
-:10473000BE24864F16602C9DB141E398F80BB8B3A8
-:104740000A19EB8FFF842ECE1B89D01963392B6C8D
-:10475000E19002EF8365539997B16D0057560AB403
-:1047600053BF3A60C7BAB5DAC97627634ECDA97D83
-:104770009DCB58F60C6663F01CB894BFC7BFAFE181
-:10478000FF9C90B53C8899CA3958F6A49E8221991D
-:104790008779BE56E3C1DBA5970E8FCE533E37D542
-:1047A000F9D2DD5ACFF7F2B978D127FAC3D0FA6936
-:1047B000AC3798B1704CFDAA90AEB16BE1090868B6
-:1047C000CEEFD97E2A2B2A443ADCC726D2B346F351
-:1047D000DD8578A9396A672180BBA6F65409965908
-:1047E000ABC286E4F46C3F9CD9891E454CD14EE1A6
-:1047F0007CBDCC8BF3532B7D4F94009EE726062681
-:1048000061BFEB1283F494EF33674FC90C023CC5D0
-:104810000BF2430CE87E7EA3E27740F3D34A58B70D
-:10482000033D2A6EAF2DB811EAFD560FDE8CED2A3E
-:1048300067B41D217AB0DA3CC4539BCEF967606B34
-:10484000D1A71AD00D582C9494827461ECA4890ECF
-:10485000F87772A828ABBDE3F172CFB9D88F86BDC7
-:104860008469BEF27D4EE8E8A0C131E3B14282879F
-:1048700031E471D6AEC4A3EBC0578A8E6A05BD8FF2
-:10488000F7F79F4788CB21E00EE95BE5D1C3CB80EA
-:10489000BEC52FDB2337003DAAB6286107946DFB08
-:1048A0005D01A4CFB9ED5006BA443C3AD53F6B3810
-:1048B000A95CE3687BE47A2877BDACB2ADD8EDD0D3
-:1048C000041BCADD29013B1B0D65C0C77C172F5691
-:1048D0006D39701FF657D6EA602EE8BFEA9505B726
-:1048E0005C0FE505C06F58A5EA997ABD2F9417862D
-:1048F00095662C774E64C41FA1143DFC0C8CD7E93F
-:104900006D4BBF03E4E54C9D93F90094E59EB6F42E
-:10491000DB818FCAC3BB4AB05DF94EC58F682F7E5D
-:10492000F999235938AFE780AF808F2A7624329FD8
-:10493000C41FFC7F0AA672037C5F0CF344F95FC0BE
-:104940009A4A988AE3AFD77D9E28BECED419344EBA
-:10495000B73C3D07E340BBEA17153F4EB1DAC682CC
-:104960002857E75E71CDD8E6C6F9D5EB791E9CD7FE
-:10497000C33AD65B109EB507555679788B5E02DF39
-:10498000CB376DD1E7E723DE40EFE5235C7DAC70EC
-:104990006D540388DFC5C9CEAD2AE087B90399D32A
-:1049A000E3F0CF993A506379D17239CA37E993B0BD
-:1049B0003ECD54BF4449267EADD8A1329F859F3855
-:1049C000FD43C738FD43FB3CE16772A2F45B6C70AA
-:1049D0003D29E9B73859D053EB2A8C07CF23480F2C
-:1049E00080A709F105CFB5023EEF0456A4015DBCD6
-:1049F000016628ECF2FCD96467B3188CFD169B178E
-:104A0000D0C64359678B989F3143AB0A4C82F2570B
-:104A1000ACF44D9C0F637E5F29E0B951613370DEC9
-:104A2000871158984F63964EF86B9A5CB84D5504B1
-:104A3000CCA9589EFF93D539D4FE38B5D7A0FDF048
-:104A4000DEDB1B25E32CED8D9232D9FE3DACC79CFD
-:104A5000976EDF54729D75FC9272D9FE231ADF7D2A
-:104A600069F88D1B2758C7BFB192DAD73838BDBA5D
-:104A7000929DE1AD506E70F9031AD24D63117CAF77
-:104A8000A5E46DC57AAAE407D61650A1BD7B67F2EE
-:104A9000C8D5CCCC1713FF88E379405ACC7C91342D
-:104AA0002EC1C28FC981144B197A324E5D13D54382
-:104AB00001AF93E0D1FBEAA42F8AFA3A09DE07F7A7
-:104AC000BBA8FCE0751CDE07FBBA49CE10069605B4
-:104AD000653D78AD615A8F004E856532764109BAE1
-:104AE0009431E6F73E1BBE4F50592DCE27C1C14829
-:104AF0001F3D9C53B82D64C2CFCA01405F28A72A2E
-:104B00003AC7A3C0EBC303E667CE328DD338409FCC
-:104B1000B1359FBF9FE3C6F14AD315D4837A579E20
-:104B2000E1EE398E23779C651C6776198D931333DC
-:104B30008E23BB2C661CE78CADE2BD1867D0A5C6E2
-:104B40007938F73AEB7CB2CB699C82D8F96497C785
-:104B50008C93C0E703EFC5387EC45FAFF31934C14F
-:104B60003A9F819534CEF538CE18D37C0656C68C44
-:104B7000E3A671F03D8E0386948F6500DD1D5DF325
-:104B800089FEBF7491BDA03B82CF62BFEC5D17234D
-:104B90007DE283713350AFC0E20CF2AB292934CEF1
-:104BA0001709407FB799CE5C1FD113F4CF3C012287
-:104BB0000B0344A07FAA058FCEDD392DBB1E9FAD10
-:104BC000C599B3D02ED9E0F10F01D139D75AACCF66
-:104BD0008963DFCC6BB29F6AB7F0AFD07B13D9D0BB
-:104BE0005A18BF05958DA97C0AF41703BD7512F4F8
-:104BF000173E4F0BFBF423D06F4C37C35B4FF3389A
-:104C0000A5713C9EDAC4D7912FD61FB383B187C359
-:104C10001CCF07B8EF14D398D704C69F49CE6A04B7
-:104C20003DBA5E7184B7123D02FD6CC0E76C631F34
-:104C3000C095A80776E61F843D0A7FFD6C60CBDE39
-:104C4000B372D761ACF6B6326BC06298EF8C96F552
-:104C5000F67E503E676FBFCFEF36F533C37E12E767
-:104C6000ED84FFB09FBB83768B7DFA9D326BF9DEBE
-:104C7000187BB552C915F410E3FAC276A4D79DE9A2
-:104C80001C9E7BF139123F1B44AFFB0CDE56C25316
-:104C9000F3433B8BD07AD49EC6F2111F696417058B
-:104CA000E5BA1203DF7D7667A014E879DFF755C215
-:104CB000632CBCEDFB130336B097DA37FEBB1DED5A
-:104CC000EFCBC17FFF52EB7716E2E349BC4A3EB817
-:104CD0006B46519F8F4CF5EE0EDED4E72313BF7C5D
-:104CE000A76C9AA57C6FEDDD96FAF72F9D65F93ECE
-:104CF0002BB4D0F27DCECA4596F2BCA6EF5BEA2F6C
-:104D0000D8586FF9BE30BCCAF2BD62C77A4BB9AA97
-:104D1000F9494BFD9AD62D96EFB6FDC36E45795CE9
-:104D2000FE5B95A17D76C17DEA11B4AF2E189A1F66
-:104D3000EB5423AF811C7E529749FC7DA6CE47CF12
-:104D400073ADA39C688FD724803CC35ABF5FF943DF
-:104D500068E504D423501F74F841E5C350089CA7AC
-:104D600037141FF1BDBA516711605585A574F375ED
-:104D7000971AFDAEB5C3F751BD7F57376A71BF6B48
-:104D8000ED5ADC7E3B95AE3CB4EF42EF3818DA8149
-:104D9000BDD90FF0D70FD78BDEBE77D85859B3499E
-:104DA000EF9C526CC407772A134FA17EAED4B9BCD6
-:104DB00057EECE9A88FE60A51EC9AB755F62BC66D1
-:104DC000002603FBC9A5792D0CF78BCA2FD16F9054
-:104DD00045EE97B0E0C7A89F3B0EA8A46759E450E2
-:104DE000F66DC371FCC0297CCF5AD3687D7CBB2E85
-:104DF000D0E723F0E74ED44DA1E7EFEB4AFB7C046C
-:104E0000BAE6BDBA19547EBF2E48CFF6BA327A9EA2
-:104E1000ACABA5EF1FD52DA5F2A9BA103D3FA95BFC
-:104E200049CF33754DF4BDA36E2395CFD585E9D910
-:104E3000ED07087B94A50AFB4FD8EBB07250F9BC84
-:104E400098830AFFE67EAB3F13E5FABCFB8B3CB4CC
-:104E500073CF9F00C3248E7F289FB1FCD63BFD02F9
-:104E6000B4DECF0F03FD47F5FCEE4AE0F471D9D86C
-:104E70001406FA67D5109D69307EC22FAF217B19C9
-:104E8000DE6B8CF465D83FCD13A77F9C73C6E5E934
-:104E9000D4CD1F4FFDB910E30F770A7D987048AD50
-:104EA000E574DBE647BA99F0C7EDB297853E8FC14E
-:104EB00023D972593DF179364DE2B32D1BE3001B26
-:104EC00094D26136E083F32D0E9AD7F9BD896186BD
-:104ED0006D313832FE5278E37054EC701966FD5033
-:104EE000D59C6C58F5459661D617E78F6EF3A2DC1A
-:104EF0002FCEB4191F8D42FE0808FEE07C27FBAFC1
-:104F00006ACE31DC967EACE5F34DCA14F48340B929
-:104F100027DD1EC73F90CFC599BAF111C8F7991D7B
-:104F20008392705CF0E30C1CA7A3CE30F8B899868E
-:104F3000992F2B9726507D095F6FFDFEADE143CB86
-:104F4000E0432723D47F3DE89BFBD94CFB23C5736B
-:104F5000D85EFB17B8EE38E0FFAF291EA05159F616
-:104F60005BD3AC861CD7E2FB9D96F1A09D4FFAD097
-:104F7000B85EF54E778D9D32C505AA710CF28F9CF7
-:104F800044E720F49804FD756AEE950A8C33C5E673
-:104F9000A3EF35821FAB9CED7A105E9D6DE1F4E8C6
-:104FA0006D9C3375477D1AE88F32277864304E59EF
-:104FB000F3B049A81FCFB62C4F0F02DF56A8E71F4A
-:104FC0002C8DD37EA54DE1F084ED5DEDA6F9C838BA
-:104FD0000A63D0AF330A3F72FA295339565FCBE7E1
-:104FE000A3D82FF047F5CE6325D703FCD5AD9FEBB3
-:104FF00008C7145BF0515B5A74FE0ACE1FFA29DF12
-:10500000F1818EF3FBC41ECAFBE125F4544F38DD59
-:105010009914B793F085581BDA31B3BBE38ABEBB52
-:10502000DE05D1FCF45FEC6C35C0C1BE825AF0DD08
-:105030002EBECE65A55EC4D7EC960A8A2F7E6A93F3
-:1050400076535321F2C759669B82F33BCBDEF28E37
-:1050500032E1AFC5C6ED7EB692DB3121F80FE1013A
-:105060007BD662D72CD8682DCF67D3D3516FCCDFD6
-:1050700060676140D142B48B247FC0BCB7DBB8BD50
-:10508000BB80D536A23DA739B87F30DB605A3F8060
-:10509000ABEAE79B0BD1EEFF85CD46F49171868597
-:1050A000291CEEF2D4B01E80EF1FB68CBAF37AE45E
-:1050B0003E47B811D76596C4FCCFB09EF89CB3D2DA
-:1050C0000ADFE5E08F8597B165163864BF120E756B
-:1050D000871208C7E1BB3724DF093D92A25AEDFCD5
-:1050E0008C98F27B3611BF54998A743E6B3843B664
-:1050F00024FAEE8F607C64B7C3BF1CE8FB80ADB4BC
-:105100001DF533D80505CC54EF015B90DE77286F91
-:10511000CE47FB94699102F4EF614DD1901F74C1A9
-:105120000F6A82B700E3B11E06EB27C8A503E1832F
-:105130007E1A3D65535901C65F414EA1BF75DE928F
-:10514000A30A945DEE1686FD3932ADF16597CF5A0C
-:10515000AEC17F201D86328AE3240EB57E87058B83
-:1051600021BF79FCD6F7FFD18DA708F1AD97581A6A
-:105170009E4E774485F1D938ADC36C37573B39FC27
-:10518000E49743FD25C29EAF66BE10C58933391F23
-:105190002CB9C946F02CF1F8FC21F8AE680186F272
-:1051A00087B16AF33A56731144AE8FA9AC75E9C85A
-:1051B0009735173516067D5F600B7AD43188BF00AE
-:1051C000D9B94E40D6D700B2E69E62B17B59FF14E2
-:1051D000B1BEF637CCF2DA1FE93C264A67A917ECD4
-:1051E000422F82BEC850D3500F7695905FC2DA49E5
-:1051F0004FC87A7AB45E7F84A3B77AAE68BD9C78D4
-:10520000FD55FDFC853D21C07FF9CF1EF302F1D98C
-:10521000A75A53BA1FDE573EB3C28B7CFC8916F2E5
-:10522000E2BC3F0DAB53E2F1F39DAA22FCB1805BDF
-:10523000417F58D0E9CCF36B6E41BC7FF18CDDC06F
-:105240002A353B1C110710B1BA6521E7A71D8E0F47
-:1052500078F9E1CF919E35AD56792B7FF6B1748CFC
-:10526000770286B8DFC822643F576FFFB804ED911C
-:105270001AD6457A22B61D8E7F3185D6AF597A521D
-:10528000CFEF72FFA546F07D4DCB9ACF552F96AD4F
-:10529000F25D26FC911B554F2AC595C6B2B1483721
-:1052A000890716E6F6F0F2E79E28F800E0E8D8FE57
-:1052B0002F5EC51237E2FAE17CF39C1FBFEAEB5D7B
-:1052C000AF9F13FE7CB45D98DAF95AB9FDCEF6F2C1
-:1052D00067A53DE2457FA9728BDD0F92C92A5FD891
-:1052E000F693A790AFDF71509CA1E285C36F5F0773
-:1052F000E58A5DF6D4A97C1A6E253D4A8F1AF87F9F
-:10530000E9C828FECB5F3AACFB86F3F70FA544E96A
-:1053100050B1EB80CE86F7C45B71F301BDDD1D8714
-:105320001ECD1F94A0BDBDFCB92F7594AB4FF72BBC
-:105330002C23A767FBB22D87C99E433C11FD047D3A
-:10534000BAE9D5834E915B5E1D4DF50C5CBF7AA327
-:10535000D3D5B8F6A5111FBFF82AC6EF7FEFF0E34B
-:10536000FCCB5EFCAE17E7715AABE5FCBC79457A25
-:1053700000C62DB387D20D7AF2F7654F3F407CB659
-:10538000E0D803E9140F60812C1BADA1A12C9CDF98
-:10539000BC4D77D0FCE6B320F15BD966B5348CF117
-:1053A0002C8D4DD915471EDE14F2707AAB03D71E33
-:1053B000761A152CFA876FA9B44FC0D8228A373CC9
-:1053C00020F721D8622A5F70723A6D536D32BEE1C8
-:1053D000B4F0E9F687DB903E67060432303E097888
-:1053E00008097C29A877D4639333387D984F2B1410
-:1053F000ED402F16E37BACDF660FB80A2CEDC43A04
-:10540000C6C75F22C607B813D01E3B9D0EF64D9C43
-:10541000F97DA94ABD0CF68689BF4C72CDE57CFBAF
-:105420002A2ED752CEC3D3A6E0F73F1EE7F283ED74
-:10543000705D07B82219F4FDC0ED0AE901078BC4BD
-:1054400093E7ED7621CFD6EF727F12E0D6707D8A9A
-:10545000F209F49F42F8273B6DFE066867D2CB3510
-:10546000381ED5D3A3EF4DEBFA0221FFAFAB627F1D
-:1054700054C83FDBC4E5BE77BB37C4FD037BF827C8
-:105480004FA1BC827CE23A53F982BD14E7FDD9CE2C
-:10549000436FDF037CFD59B39453ABDE8C95D3B2DD
-:1054A000DD63583C39FDCCED6771E514DEC79553DB
-:1054B000773BF1F1DF5B6F4ABC9D8BD19B520FF6BE
-:1054C00086BF583DB856F5C5D583F0779C15F6E4F0
-:1054D0003BC96F92CFCA7F5A3590E246921F25BFD3
-:1054E00075F3A3E4B7D8795AF116FBFD15A16F2423
-:1054F0009DEDCB58C883F1D27D2AF9D79D00532367
-:10550000D0B773674E18E3CE2B5C3C7ED1697479BB
-:1055100053E0B9229997BBD2F446D40FF27D978B12
-:10552000C7B73B4BBBBCC926BFE283BDAAD707DFC9
-:10553000DBC36C4A3C7F03342FC1D1CE7AFBCEE370
-:10554000C1935577F652F4DB9B54DACF9E5B7F977D
-:1055500017F7813BF70EFA27D44FF3DE000313E071
-:10556000ED443B3009A717D0302F618EA0F7272CD0
-:10557000F4F80498DF9CBDDC5F98BB36C6BE772F7D
-:10558000D151DF807D7FD21AD7E67C532EFA29DBFA
-:1055900064FD5ECED612DDCA63F82828FCC0B19A3D
-:1055A000E0A3116C84F0C378FC42E8ABC96AFE3F0B
-:1055B000A19DD17994C715CFEF5509FFE7772A61EF
-:1055C0008CFB507C773CD2BF4B67267FB903F94DEB
-:1055D000EF5D8E3B5EFE43E10FA14AE59E770BFE39
-:1055E000199E1D7BDEC9FB05967FFEBBEC7759CF6C
-:1055F000FAC5FBFF44FBC79DFB1D0447E7FED7B37D
-:105600007F88E5571D7E84B3739983F6CF42FB3DB7
-:10561000E121F87D00D01BD7CD7D5F16B4D3BAD37E
-:1056200040749AADF1FD8EF37BFFFCBE82F9077BDF
-:105630001D3E9C47CD7E9E1752F3AA8BE22E9DFB0A
-:10564000BE2C0CBAFF76F3A9D65990F8CFC366ECFE
-:10565000467E4DE6FB0035BF18BFAD1EF7C35B0E9F
-:10566000E8B8BF52FCCBBF14A07EE9DCCDED84735B
-:10567000F6F6A7711FB44A1BBCCC8E728F365B5FE7
-:10568000B03BEDF32686F2E3E185E3A113F080F36E
-:1056900002BC94A15EEC0D1F0D1AF737FFFBE1E38E
-:1056A000F3FB70FCCABD63496EA2785102FCBD27B2
-:1056B000EC5468FEFCFDFE2F0BD0EEF9ACB99ED683
-:1056C000F1CBCD7BDBFFB8792B912B99F7C1FFE6AE
-:1056D000FC3F45E3EB52AC1CF4E4F39F3F48E51775
-:1056E0003D7E82F70AE5FFE4FF34BAEF06BA7B2F6E
-:1056F0004F77C5FEDF75DE97A3FB1B82EE1E03F31B
-:105700000A3AF7FD85E2E572FE979BB7EFFFD17984
-:105710004BFB67B5CDDF940BF5D7B2489B0FE05C30
-:1057200031747A138699C04D288D678F94DAB97FCA
-:10573000A42A3C0EC306F0B81013FE04A580F9306D
-:105740008E329FEC3ACDDD487626D3FC6D01C0C782
-:10575000EAAB67FB2957838D3C11C472FF097E8A2F
-:105760006FC6F8550D0A0B2860EF69577FFB28DAE2
-:10577000F9F6A1B688A3809E1FE0F36111C7B21BA2
-:10578000BAC59F70C7F8032E9FF5BB43F4E76423A7
-:105790009B72314FC1AD196118DF5DD444F3710FB5
-:1057A00061ACC9B40FE860A6F6D05F3E06604DF666
-:1057B000E337C55F7D37FE46B605107FC36C14D74F
-:1057C000A2A43EC2873FBC9AFC4CEE3F46F1D9D81A
-:1057D0008678D418F87F7C7EE43732E12F6AA20BFA
-:1057E0006DA82DE0B2D6137ED165E9C3E9915D299C
-:1057F000E8B3D8420F89FF3874B1D043E2F79BD2A7
-:1058000025961EB178BFDDCEE36DB174B2E477A406
-:10581000713F24027EC8EB3BB751BCE3ECF31FDCC5
-:1058200082F52B7EA13227F4736EA78745507EB593
-:10583000B08EFE54798B1A37CE2BEDF28A9F7968A1
-:10584000BCF2DD8EF054685FBEE7C302B29B967572
-:105850001DE9877181E7154EBF507B01EEDB956B2B
-:10586000DC3F88ED6F939DC7053A5E499C81F10747
-:105870006507CF572C6FBECBEE30F1DBFFB2F3BC28
-:1058800057A847F21C7A4EA1F5A6277CDC2FE878B2
-:105890004EE1F0B5DAC398F758BE638B1E44BF7271
-:1058A000C7E714C72EFED90BDE76F21755ABFFBC47
-:1058B00043257AC293E817EBC756B754919F50DD42
-:1058C0002CFCC4183FAAE267FBF6840035152F3D77
-:1058D000EBC5F8CB99B667BCE49FEEE0FEA7E6D631
-:1058E000E2FBA797F34B9B57C5F54BCFE03FC09F1B
-:1058F00038608FF1E777F4B9B2FDCB172E3C8D718C
-:10590000D28EDD9F3D8D7057FEE7BF3F8DF63DDBAC
-:10591000EF329E81F9D63CFF5B8A37C976EF0A39B0
-:105920003D378085B2A0DEB9771C943F726EDFE907
-:105930006CF4E7CEEDFA533AFAF54BF64DCEC0795A
-:105940002F79B93883C59177F944BE0C5F419C30FB
-:10595000960E875A0E911F72F68483FCBEEEF842B3
-:1059600073158FD7F8445C6167FC38ACF487AB5B88
-:105970003E2CE1F131E1175F2E8E701CE878ED15B9
-:10598000D06BA78813C5D0EB2CFE03E8F2650CBDE5
-:105990002EB0E08FB3701FB2A54FAF7184C815E071
-:1059A00049C6778FD803361DE5607762379DA622FA
-:1059B0009D5EB8908DF1F04FEC5D64F774ED731857
-:1059C000E8DF97EFFB1DC9C5B9978F51FC94893863
-:1059D000EB39D6FDC7E3628A98DF760F8F3F087CEC
-:1059E000637CC2E7A5F7220EC1F955C6277A8B4B17
-:1059F0008CD545DE93883B576D7F576731711E65A7
-:105A00001CD2E9034B7C5CCE3BB63F03F130D61C85
-:105A10005F8B1FF7917E73944E3CAE26E367E7B62B
-:105A200088B81BBCEF3F12FD411EC7A8092BBF63FE
-:105A300071E450C6D746EA317218BEB2B8DAE5E072
-:105A4000FD6BF13144E7EB83C44BC757F1F5F03FF1
-:105A5000EA5CAEA7D8825375D37EF6FD629F45E21D
-:105A60004BC2DB21F2F03A9E57291ED4D87C88F431
-:105A700069AC3C57F7720EE23E9DC75BAB5B0F14FF
-:105A8000A0DEE938F80AF15DF5CE0FF410F4736486
-:105A9000C74B3AB727399FA39E0E9BF474C78B0759
-:105AA0000A78DC8FE7DDC6F65F21FAAFD96BEDBF70
-:105AB00066E7E796FE2B42CDB4FF75B971CE6881DB
-:105AC000BB70BE67DAEC0CF5DD9966754A389E1D31
-:105AD000A8DB2DFBA08DC7745AAF46BF9540F9B91E
-:105AE0004B8E4D793709F7E940CCD0FE6DA9E77CA4
-:105AF000D5F2A3403FA44BCBB17B545C37F6201EBC
-:105B00004D7670E1F1DA620FC86BE17BA5A391AD30
-:105B100062F5C0D813360BDC304E06EAE306E80720
-:105B2000F3E9317F08F747556FC9148447356C8610
-:105B30002BEEFAC9FBB3BB4B19DAE576C39AAF9CDF
-:105B4000395DC4D122D6BCF54C9D0DC57D70664B28
-:105B5000F0E37EC0E26181118731AF7E5E26C589A8
-:105B6000B36EE3EDCE1AEE90EDDAE8BE6DE245E8F5
-:105B70001FF3606CE1F533A15DA2D6ACE03E003CC2
-:105B800019D2E5015B70AB9E86F574E603D5F8B4D7
-:105B9000AE68947F21CEBDC8FE64BDDEF683E539D4
-:105BA0002455C03F48EC070F60ED0AEE076FF2F096
-:105BB000F34803DDA974DE689BB0DB7CB8EF8AF59F
-:105BC0006AADEBF665CF23ADB496538B8B160DF40F
-:105BD00033F661E383C51AE883D4BB8A76F5337064
-:105BE0005F7A4331E6DDA73E5B34220BCA77398604
-:105BF0004FA2EFBF2E1A910DE55AE7B849F4BD4206
-:105C0000A1BCC07D7A6771283F2A9F6960DC62BEB3
-:105C100005C8ED4194DBB3A51D8DF8B5EA8E2F7450
-:105C20007E1E8695E2FC078CE3F3EFEF7E6F17CEC6
-:105C300077A0ADBD1EF9EFC7FBBE4CC67A3E66D05D
-:105C40003C0DD660E0BE3CBC1AF7F525F27F62F34E
-:105C50006024BF6F4B0CFE06E158357BE81325A886
-:105C6000532BFDC447B1FBC4CC4825BACC157441B5
-:105C7000389DA63CE4056A88F25EF04402E5F5B082
-:105C800049068EA7842AD5AFAFF9E6709DD645BEEA
-:105C900081380F663A2F7506E15D9718A467EC7995
-:105CA000A9837A6907BECF9A7F311BE721CF4115BF
-:105CB0002F70537CE0FC5E1676C49123F9DC5AC742
-:105CC000D2B4C1BD7FFF8D23F81FD87FEE2F7DBBDF
-:105CD0008F427FD7CED5FD98C276EDD2D169DA2832
-:105CE000C627847685A05F26D214E5EC41C6CFE7AF
-:105CF000389400FA8F9DDF35480FF79F3B95FC8C59
-:105D0000CEC49C66CCA3E8FC21CF0780955E417988
-:105D100018B03729827E10F0F31731FCFC8575BD71
-:105D2000B18EDBF9B5AFB59DFA33447F60F0A4A323
-:105D3000FCF0BF4E95DBDB9D753E8203CCC303B800
-:105D4000AE5EE978590E110F17F401BCF77398F0A5
-:105D50003ED0D12BFD721D9C7EF48CA5DF7C676D3F
-:105D600036CA7379697309BAA8BFD5835761BDD3A1
-:105D7000F38F34DAA15ED5CCDA3C64F69E74E5E7A5
-:105D8000B1D2F7CEAAB763BC02E9E2EB49BF6B9789
-:105D9000FAD3B43E167A8E72403FD7EEFDDC8670A1
-:105DA0004B3A3E21F2FC63DBFF834311E356D6DB23
-:105DB000314ED2AA933D1B5B6F0A1EAA1A132D17F0
-:105DC000380B69DC0C1B8F77F4ACCFD7BF68BF4EA4
-:105DD0003A97D51B1F1618BC3FC0FBB7117E89F739
-:105DE0005B1C42DFF6C4FB34AC0778A7E715E0FD87
-:105DF000CE4BE15DDACF15421F54E0FE09F0CDC76E
-:105E000081E9E98361DC12D54D7CBFF01995E40D81
-:105E1000EA4FCD4A8FEA8F85E36B0FE03C176E5651
-:105E2000883FE78AF3A59F897CFED83CA8F93342D6
-:105E3000B4AFD3231F2A1CE3CFC5E4B95747F97485
-:105E400020CF4FE3E7B5542107C50BF293D00EDA0C
-:105E50006FF7FD9AECEB3754B6350EDE89B9D2A256
-:105E6000E501B5364B7E2C9B9B6CE977D2827CDAC0
-:105E7000EF5EECF15DD29F1AB8D4BA5EE784ACE76E
-:105E80008B06ADB49E2F1AD2D4D752FFAA8DB996E5
-:105E9000EFC3C2575BBE5FB363A4A53CBCF93A4BEA
-:105EA000FD6B5B275ACA2322DFB6D41F7574BAA5CF
-:105EB0003CA6ED1E4BFDB127665BBE8F6F2FB77CF6
-:105EC000BFFE93C596F2B7BA7E60B54F6C8CF421D5
-:105ED0004B50483FBE56372E1BF3B0D9686512E2CF
-:105EE000B358E411BEB648B7195E7CE6D90CD0535E
-:105EF00007E74DA5F5FEB545E9011F3D0B03E8CFCA
-:105F00003075C2E878799A938DF1D9E67CA862A7BA
-:105F1000DDA2CF261BD6F2CB926F0672BE79354634
-:105F20009FD96B2744C022647D170ECEC0F140BEBE
-:105F3000F609BDB6EF0AF5DA4194C3D3E991462CD0
-:105F40004BF962625D2D127C04CF808EF990933CF8
-:105F5000B4FE06F0A58FDE87349093894E7FFFC391
-:105F6000381F9B3F15996FD28CD2D7786EA5587F7A
-:105F7000D950DB37597FA57C67DA44BE5A0ACF5720
-:105F80007B725E5E1233E1F55D874DD8CD4DFC69C5
-:105F90001C7575E7A9E69ADF7F92A099F2E3940554
-:105FA00053293F24B3173DA867E6DEB41DF4AF9E26
-:105FB000E5A3A77CDF38C31637EFEB9CD09BD2BE9E
-:105FC0001A16B5AFCE211DCE66BEF538E62555CFE3
-:105FD000EC22FB2AD3D6B4E808CEEB57AA8857FAAE
-:105FE000F8792A6117CFBBE9D14547701FFA5F875F
-:105FF000905E92E36CAA9B7293663A37DEBF173FBE
-:10600000699893AF0F4FD70DBD692EE5691BFC7CD6
-:10601000A8E83F3B54558276F240915FFAB82D7E56
-:106020007E4B8293CF2B03498EF01A6E928FB3F37F
-:10603000DFF36A308FA76CC10427EED35EDB56C84E
-:10604000FDBC801FCF9D6647EE7D1CEB67676A94A1
-:10605000DF1A3B7EC6CCE0CA1C985F438ACDEFA610
-:10606000729782F51D0F31D607EA37FCA74AF03444
-:106070001C1C4FF91E0E772D43FB55CEEB50CA5317
-:10608000841FB52591D63D26F6C1657CF542E6DC38
-:1060900036B42B2E6CB0D37817608E06F47FA145F2
-:1060A000A57DD6232909111B94D5951E52A9D9681F
-:1060B0006B42FDF92D9EB02F278A176DE3043AFF3E
-:1060C000E2E8CFE7DF90E20EBB7368DE29386F09A4
-:1060D000A79CF7805EFCCA1B041EB3AEEA3E97C1C4
-:1060E000908F5543A37EE725F37397E1BA71825EE3
-:1060F000D6F934664EBFF56E3C2F745C65980AE2A3
-:106100006B6FA2F9CF87F9637C3716BF677D395F64
-:10611000D85482F3068453DD5842F3A07AD0AEEA15
-:10612000C70A7B2A07F9303885E8DAD746E70063E3
-:10613000E12E71F238EB8D4E1E0FD033F36EDADEA6
-:10614000079F83492E6E76F6BACEDFE2E47A889E08
-:10615000577E9F40C4B2CEAB011BD941B17081DEE6
-:10616000BADB69B26BD4A4870AB0DFDEEDB15D079C
-:1061700074B4C7DC8CEC64A92F7BB3C7D00E437E0C
-:106180009376D802A755EFC2FCCAC5FCCAE3CD2F4F
-:106190008E9EADC17AA7EF89C4B563D2F4F87A6850
-:1061A000B3C07F8DA1338A2BF5120F7FC229EDC1B9
-:1061B000BD0774C42BCC13F19A09FE7109E9197B50
-:1061C000DCBCEFCBF919B96BF2771FC5FEC08E4569
-:1061D000EE39DFE44B4AB9841D615FFA2B97198FC2
-:1061E0008FC4F007E06DBD93DB7FF4EC81B754C042
-:1061F0009BCD82B7C79D97B4FFB8BEED2BCE0F9C49
-:10620000137802BDFB7DECFFEC6DE7EE44DFB0EAF6
-:10621000B6AF845FCBEBA70BFD0C7EEF3F7CECA30E
-:10622000FA4B709CA8FFDB5E887ECFF297AF4A42A4
-:10623000FB69D29EBB0D7C9E4F1D4CEBCFD93D8E92
-:10624000008E733685E7D39DDD33F608C6073EAB77
-:106250003B9A6BD6CF675F3C5668877ECEEE3E5644
-:10626000A851FE6ED8628F577DFD9B423C2725F3D7
-:106270009EBBE9ECE47A7D838BC71DD2D2F546CC78
-:10628000E7EE4848A6793F966E7B245E3C05D51D17
-:10629000EDAB7B74DA475C3CCCB7DC8DF1941C83AE
-:1062A000F264972B81AC79B80F32CDE9C7387D6A9B
-:1062B0002E1B9A9384A1C62073030B395E6BA2E355
-:1062C000A0096DC6013463649C452BE6FAB1EB0E60
-:1062D0009DF2BA1235DF1333A19C3943A3F549C6A9
-:1062E0005DFE9C9042F0C9B84B373C6FD869DD58D1
-:1062F0009C136C2A82768BC7A7503BEFB4B789DE1C
-:106300009D3E5BC88EF3D1BA28FEF24F7543D3068B
-:10631000031E8D2CDB4D64837C05D832E5E77B358D
-:10632000164A027B640DF0EF60E0DF963A27D56FE6
-:10633000043BCE48A17B0CA2F77098F87E779D4174
-:10634000F57E529749ED1EADF3D1B37BDD67BC1DE1
-:1063500095E3E8C3BFD7735D1DBFEF4396FF7D3460
-:10636000D85540EFD4B14055C04BAA381F2EBF3F7F
-:1063700055F7C6A049830532009F7D2B8D2DAB2F8D
-:10638000016FAA239C8C478007BA58685226E6E121
-:10639000753D52928CE717EA274D1A0678C4FDE73F
-:1063A000EBC09570AD6D084D007EA8F4D5635C2EF2
-:1063B000AB5569C6F526AB757D11C6F9A11E9DEBDF
-:1063C00093FDBA5C5C3F251E7A52C91D8EC17FBE0B
-:1063D0006FCEF62586E39DFF1CEAE27A6AB068B7C5
-:1063E00046EC7B774D73D33D0989875CC42F597B7D
-:1063F000AFA1FD37772FFBBEB1FD241EFA13C5698F
-:10640000DD4AD301DC4764F3B8BD28F9A9B7765853
-:106410005FBF82FA9D7E8DE2B660A6D2FCCE4EEBC7
-:106420004FF8C6FAE67B3C3AF5F876D46817B753CE
-:1064300057D8E3EB6F8D71FB60745B17ED37E2BDEE
-:106440004A88EFACE34D0AFAD367159E2FD117F0B7
-:10645000B11BCA59139AE8DEA56DCEE0752E80EF08
-:106460008FC689BC15008E2BFFF7D9D84EE2432D7D
-:10647000D09DA84FB2F67EC0CFE1D8DA75CC4FFBE5
-:10648000CEAA17283EA8EAA539BC5CB702E3876903
-:10649000DED22DC8272CF4C2A4D7C0E7794C9C2BA0
-:1064A000C637A8F7D6B84439F47C4300F8648D9D0C
-:1064B00097BFB3EAB9063C77BCC65EBA10CF256376
-:1064C000B901FA5F93DC9C6983B2BBFED986A30352
-:1064D000B02CEB3F4B7C76A78B9FEF61EED22CC4A8
-:1064E0007B77D980F2705359E365E6E44F39BFAA50
-:1064F000437F3AD20FF8A57A2FBF87A61B6FADEB6B
-:10650000155C4F7E5277D4D7A0093991FA03D6E5AE
-:10651000AB3219F9157A5809E72A781FC7CA74737C
-:106520003EC9AD898A585FA0BD392E1873EE8C8E96
-:10653000B2E0FADAC0F33662E9FA46425143C218D1
-:106540003C2F1A5CADA21E7CC16E50DE7BBB467A2E
-:10655000BB43E6BDD7DAC97EAB14E750EDCB82ABC7
-:1065600087A15CDCABF9310E5091D35484F64BC556
-:106570002B39FE7A16CDA3AD486E4E1FE98EE6D1BB
-:10658000CAF2721137CA48AE4D4ECEC7FD92F5D948
-:10659000B89F51CD9AEEFB01C2FBA6CA90DF3F3DEA
-:1065A000303E09EF05AA8232C6A9AA5A8EE941A84F
-:1065B0005790C0EFA3A96E01BE71F37B6202798C84
-:1065C0006DD18C04D4F33F09D45E8D26EC13AEA3B9
-:1065D000935C40D767730306D2F9A5556F3538BF72
-:1065E0000565DD18C64660F99D06E4B38A1136CA12
-:1065F0008364A1775E0B0C16FBB1507EC89531D930
-:106600001C97CE12EB78CD26379DD78275F971E4B1
-:10661000EFEA8DB610EE6FD99C6D744EE725975C4E
-:10662000FFADE79B36285C1F86E6F138E7929B5268
-:10663000BE4DE79B56E41AA14BC45BCB2E26D03946
-:1066400026592E48F051FF655A88F679CA2E7AE904
-:10665000FCD3DF6E3CA7E53C55CFF1DC048F1CAFCB
-:10666000323A1ED1F5D0C85F3D3E18E8B66497DDDA
-:10667000E630F1DD925D62FFDC15C8C07ED2748E1B
-:106680006786FE1BF01ADD41C3CB210DD681755202
-:10669000BE431D0D932620DDA2DF9955FE03E83F82
-:1066A000AF4B90E50BF1EB27C4D4CF95FDFF85EA06
-:1066B000C7C29396102D3BA1BEF617477719E15B31
-:1066C0006F8BE92F4596F51593FA47F9EAA155DE48
-:1066D000C321E0AB75C94D45A8FFBBE6311FDE7392
-:1066E00085FCEA37E9DB875C5CCF965DCCB5D03BB7
-:1066F0008AF73C0B5D4ED7655AF62517CC5C42FBFA
-:10670000A70FA1B0603F2CC4CFC16CEAC7C2A6B826
-:10671000CDFF87E3AF85E3BA5EE0F887FF62387CA0
-:1067200096F1A2700CB6C0F7D7C2B1F5CEBC6FE738
-:106730004095C794903317D7851FF1BC35357992B2
-:10674000AF1EF74B7EA451DC7D08E3F928B91A3B54
-:10675000AA8D44F9690A60DC822DE3F60ABC5F6900
-:106760001F49EB10F90B83F63A66615E456E59607E
-:10677000213E59FF7CDA8F91FB984CC4F5E4FECBA7
-:10678000108315E1BD7C6F27CCA2752AB77466050E
-:10679000C6BF55CFE8045C0F1FB38543385EE85190
-:1067A0003E5E9A2DDCEC447BC93BD8C0F52ECDCBA8
-:1067B000F51F5B9D4FEBDF565BEED58B008E154AC8
-:1067C00051C21B88E7E45C8A63E37BBC0767AB5874
-:1067D000B7D464BF81EBD456B16E2D17FA5DBE4FAE
-:1067E0004C299D8576C4F2D545939DE3510F0556FE
-:1067F000F681F566D9EAA21599E371BDF1E53A6132
-:106800007D599650B4C20993D95AEFEB6B2447CB0C
-:1068100043FE02AB35E989A21568A734B81797A3E0
-:106820009D03DF0FA35FF86C8AD43BFC7BAED4538F
-:10683000A897408FA9F5DDE510EAA5DC6EBD5344AD
-:106840007A67FBD32A95CB603CB47B601E21BCBF2A
-:10685000AB6B8846FE910B604980B26B582EED6B96
-:10686000C1BC5902C6F587F1EF725F421F62A37D7A
-:1068700009AC8F787465F1FAFA347E9E59F7B8C97D
-:106880006F93FB1CAAD8574B1079248A318DCED92F
-:106890003AD78E5C8C7E9473B075FF588FC9375190
-:1068A00063F34FDC11B2BB1A12449CB90FCBA47B2B
-:1068B0000DC47BC6FC23F1997E774311DD77E76138
-:1068C00006E63B670623CC6C2FC9A703D6519F4928
-:1068D0006E1C6E168897EF704F22B787DD1735EE66
-:1068E000272A60DFE03AEA1176B8B08FECF21EA2F8
-:1068F000987557DA4B7671DFDD929B2666E0B921F9
-:10690000D51D70A29D73C01849FB292AF3DF5A6474
-:10691000B2771A2237513C5133020CED9CFDC2CEA6
-:10692000510D3F33DB398D75E080C35AB5AD308FE3
-:10693000EE9779CA15710E42FA3E66F3A3DE38343B
-:10694000B23CA4603C71292339DD56983E11F7030F
-:10695000B668A549F7A2BC1C87F17C9C6E7CFF79C8
-:10696000B982F1EF0BCED224D407EB9299C58F2ACE
-:106970004EE4FEC89309DCEE947E4223C013013836
-:10698000B48B57D37D3B43845DAACF9C44F12D4CFF
-:10699000D3C178A583D5860C77F43E3947A6CD922E
-:1069A0009FA85D2CA0F8DF930936CBFED1C3E23E51
-:1069B000405976B25A1EE7059E8EE7BFCD12703A57
-:1069C000C01EF2917D12B33FDFD33E227B45D2A79A
-:1069D000DB4E51F8B9CDDEECA39A8B368B9E8D9EA3
-:1069E00037D7492F9F13E7F9659E865BE8B3C6CC7E
-:1069F00060D3F539D1F3FB9AC8D7582BCEEDB34C01
-:106A0000ADCB7C4E3E11E331F0BD41E46D24C69C1C
-:106A1000BB77B99790BFE01AAA59CE69395990DA75
-:106A2000397CD6F75A66EC79FE50779E16E5156AE2
-:106A3000EC49850EEF737BB79FC8933A9BF87E2194
-:106A4000CA2FD8BB3F77D23E023FC729E359DFD4D4
-:106A50003EDE8F76D518F40BA78CC07EBF23D6A35D
-:106A60002C569AC537079B19E5F524F8DB19BF1397
-:106A70008CEC2D55EAB9D00B0DE847A599ED3B9369
-:106A8000BD3670CD0B0D0DDCEFA0F27756AD263D77
-:106A9000B8C225CB2BA80CEB5504FD1EB6C7E143AD
-:106AA0007E82F601941B76671ED9CB6A2EB8B4009D
-:106AB000F724BC9F10E3F97B1C5BD19E05BFF64E0B
-:106AC00097894FCF7A4E64B3FCB8FD852CFD657F66
-:106AD000B3FE60FC16CC0392DF2779374654DECE36
-:106AE00087ED58FFB6F743D0FF632F3BE8DE107900
-:106AF0000F722CBF162672BB01F58639DF529F3903
-:106B00003780CC29E5D3919960C9D396F2AA5D1C50
-:106B10004AF229DBED4FC8E1F77369018AAB6917C7
-:106B2000F349FE9F14746DAC332E334E4A2FE38C21
-:106B3000A47E7A1FA750E80926F6B334C37CCF4B56
-:106B40006FF21ABB7F17ABDFE453EAB7DDA2FF3B5E
-:106B500012ADF1E1F28DCD4790857E600BCE481CE1
-:106B6000837959EF797129AEB4450A50DE1EE8F9F0
-:106B7000BE1A27B7C0C5F727F2762C3A88EC3A3709
-:106B800031D884F6CC7D89226E9F09EB9A8AEB1668
-:106B9000CF2B5A87DF31FE1CF43D3119F5D4B412E6
-:106BA0008A3F6F4B2C7D1DDBAD9A5E48B10209F721
-:106BB0009A3A9E0F27F5A51BF105F51D5A2DE1CD3B
-:106BC000E10E44D0BE684CFCF564F4B1548DCB4169
-:106BD000E59ABD24074ECD4F7CE574DB7CB8BE3B07
-:106BE000C1BFC375AFDE6DA378D272BCA73707CF24
-:106BF000034C35505E177B7233D825F4A376315D94
-:106C0000E85FEBBD377FFB7152A97D8FFB750E8D61
-:106C10008F607F9A9F517E0B22E143935E95EB7AC2
-:106C20006CBBD8FE253E257E1D5A90F0AAA3DD1030
-:106C300007AECDDD7119AE0F33A4FE4C7E3B2F02A3
-:106C40006FAB94762FDA27A0173727A25E1CDEF5EC
-:106C50006F8A8FF4693AB76742F23E01CBFD453245
-:106C60002EAFBAB95D23E15FFCC6634EF33E512CF3
-:106C7000BCB1EBA53BDF9A47E1EC9F10739F6F3DE2
-:106C80001F472B25BEB14F0838514EEA8D9106DAC9
-:106C90002B0D9AEF7701CAFFB093DD0C76B8657CB7
-:106CA000F95C27EEEF3D2CECA8D8EF1E71DF71ECFC
-:106CB000FB8F05FED61DB89BF4706FF4C303CF485D
-:106CC0005F4F2E33F0FC8C5DC0EBBD4CBFBDF1D1EE
-:106CD0002307785C571BE70CA38B153B9E6A2F0D8F
-:106CE000E0792F7504237B571DC0C7075A1A181760
-:106CF000F68E4E61434DEBECAAC1D3F9FDCB69068C
-:106D00009DBF533DB6D27876A6C4536BA2CDB23F99
-:106D10009F29F966C8EF693FC9C4371FA17E89E57D
-:106D20009B56E4E1340E87999EAB06E766C4A34FF9
-:106D3000542F72BEBA1C5F144EE0FC9E01CF2D3062
-:106D40008F16719F4615E20AFC9DCABBDCCC80758C
-:106D5000ED2B4FD117085F61DB419EEFDE9246CEEF
-:106D60005FE584F8F2B2C8CDE9B2C8CDE3A84927FF
-:106D7000023FC57BC35BDA127C0A7C6A4989AFA7F4
-:106D80000BDC52CE44FE84D65E80F688AC5F38D3EE
-:106D90003A9ECFCDD7BF01B25DE8D614B4CBA66280
-:106DA0001780C7417E85E771B42686F17E7AB06A86
-:106DB000B5DB00AF3B84FFB703FCC269D06F7A023A
-:106DC0000BE2BCD3FA40399FDA0776B9A3FDBDC9FF
-:106DD00051C6260F2ADD8EFD4DCEC81AB13C87B7AD
-:106DE000C77E0E27B006E7C828DE6F7500CBA5E08A
-:106DF000F750DF45F9D1F7875176A15E7A7A7B812A
-:106E000082FB92B6403AAE231F1DFB01E5C12EC0A6
-:106E10007B8C9C78A5844A7E52E18952BAB7EC53A8
-:106E2000FC9885F71D950E738FC1FC30EB3DA46C6B
-:106E30003B3F3F23F1D5931FB8FE013843CE140BDF
-:106E40009C6C1CC2EDE4ED62F1DBFD147C2CE909C5
-:106E5000E8B9C623E88972DA22EEC5ECE61B71AF09
-:106E60004287B80F6A76A2B817CAE0FE95BCE7A4BD
-:106E7000450B24A27D3EBB3B3F2140E78F2A5D812D
-:106E8000A4F148B763DC7F3A5DC4EFA73B6D0F24E4
-:106E9000A1BC9E3EA62AF594DFC1F33E655EDD6986
-:106EA000BB6FCDD5F07DCE3FAB817AFA6CF50B3A56
-:106EB0005860D4BFA29FD4AAD23E64CEA3B3D4E17B
-:106EC000507F2E380CA88F6617BB4368C7B5FCBE31
-:106ED000F67D5CCFE63CEDF02D83715EDB38EA0B8E
-:106EE0002C9F5AEBF13928DE9AABE0FDF14BD6E747
-:106EF00018B40FB9948938F3C4926258839FC7A11C
-:106F0000E5FE8593EE9317DFAB1B27C1FCAE4E6BFE
-:106F1000B1212AFFB0B6BA11CFB3ADA82FCDC43876
-:106F2000C25AF7E4468C23A4A707DA6E80753DE2C7
-:106F3000BEB104CB2D4FC9FEA63462DCE017B660AB
-:106F40008E02DF4FBB679550FEF520D9FF92C60039
-:106F5000AC09B37F7CD51727305F7B5D6309DA0509
-:106F60004057615FAF21F8E64D90E526BD7830B41B
-:106F70004F649678AA3D1A97A0786D4BB77DBEA155
-:106F800004E3107326D6166BD07FE1BAA71AF3413B
-:106F9000C58E6D2A320250BE7EDDA6125CFF5A58A5
-:106FA000A002ED921BD63D5D8271F9D43ED6FE5310
-:106FB00055119767DB1AB1BFC29981110AB4FF97C7
-:106FC000752F35A21F9286F9B930DE05CF9F1A437F
-:106FD000FDA3FAF396E83D5AAB510EAA9CED47305B
-:106FE000549BBDB44BE779DB426FF4E7FCDC5D1EDC
-:106FF000DACEF3EB653993975B96C5D7438F7AB9B1
-:10700000BFD99210FFFBAB42EF4879493AC1023B2E
-:10701000E3C8CD16B7FBFF48EE5AFF6FE9B5E4CBE6
-:10702000E8B564A9D7043EF3AD7A1A8611FAFEEAF0
-:107030005CD40F0B30D9CA642F14B64DA775E47B0E
-:107040005E6E3F331F6F9F56CCF39DBA5E49E4F7E7
-:10705000A43ADBF2CCFBA2C7053E8A1F9EFA049D30
-:10706000776FB3333AA7B2ABE89279A69518DF35BC
-:10707000F91F955A84FCFA4A8CEF8EC2FEDEA47387
-:10708000A6D80F9E43C17D0C8CCFA62D8F4F7F6954
-:107090004F555E3458A84FCF7537DA7F2A0B8DBA1B
-:1070A000FCBCA2FD59E30F3DFBD3C57E50CCFAA832
-:1070B000C787F3CF924F01DF36137FCD13FC26F73E
-:1070C00095CFED19B6D5BC8F2FCF87817EFE29FED7
-:1070D0000E4608F43CDA99855AE066AC5FD89642D1
-:1070E000FB4C923F245F48BAB6A4D452DCAEEB49C5
-:1070F00085CEEBC5C265F3703A166EE4F73366CC05
-:107100000CAAE6FBE4A53C40FF2DA2FFD1E3487E9C
-:1071100036737900B9B917E517EFDBC179F8DB0BE6
-:10712000CCBF3B21E1AF405E4C233A72FCBFECA2E6
-:10713000FDFED875328AFFBE97A16736D153DA417A
-:1071400095BDAE975E9EBF7822E2F561FC08F91FFF
-:10715000F549F387747F5C4BABCA141F9F37EAADC8
-:10716000C26E7DFCF5E1891AD963D1F5C3477699E2
-:10717000D49F11A7335ABF6BCDD793719F3955DC7C
-:10718000CF9CAAE211EC281C233C5C8F8D0BC68F90
-:107190008716B83D9C0E621E4F2E9DC83E84F97F17
-:1071A0004FACF3E3DA43F4FB4976C4E398283EA4FA
-:1071B0003EBBD5D1FEA238F762E14759063BA7DABC
-:1071C00036C8F4DDCDF5AE1C0FE06DC0FB98D3E002
-:1071D0008957FF5FF0E4887D77CE9727F7646CA12D
-:1071E000DF6D18141881FA46F217AC2762BEB6FBA1
-:1071F000A7BB39FF4F8F4387E982CFE66DE4F36F7A
-:10720000F98FE29B910F5ADE4A495E66E2F77AA156
-:107210005764BF529E643BF97D86E8EF5E8F979E70
-:10722000F5027F0847BCFC0AD90EE74BFA7A25D74E
-:10723000D730EF10D209E61DC273F8173C4A0C5E36
-:10724000C5FA20F05DA5039E018F3BECA1BE98AF6F
-:1072500095A6F27C98CBC92FCC47FC8E8087F44E44
-:107260006CFF6B057F6C11F7E81EB6813CA39CB9DF
-:1072700039BCE7F66451BF75A2DEE5F5E195C9CFEB
-:107280001691AF02F0533E66D5ABFDB658E1AF178D
-:10729000F00797E339C2D427987F3923BC45105FA4
-:1072A000295EBE9EB4E841B2DFBA9E64E4B70E0127
-:1072B0003BC207E59A52F74825272AA779CD0AD17C
-:1072C000B17003ACD38837A7C4DB1B3BCDE36EF0B2
-:1072D000782CF710540AFA0F81F5FDA700EF10E89B
-:1072E000E745829BC375F2F1E6EB313ED7BDDE0B7D
-:1072F000BEE8096744EFC7E1A4BC0AB4777CA3A346
-:107300007062FF94E7E32E5D86FD56FF66773F735C
-:10731000BF2F76F73B7BA20BF5D87AD0ABA40E82B9
-:1073200087F01CC9DCBDC906DEF700FE820DFD42F8
-:1073300039EE5C4DFEEE4F7B21DE779ED73D0EE8A9
-:107340004F93FE3BE071F3FACE8303F11E6DA6F17D
-:10735000F529ADE9F48F701FA2B775F56FC50F4021
-:10736000479A77D72E98972F8ABF96E659CB5CA875
-:107370002F4F303FEA4B39AF2133DBBD987F53238A
-:10738000F428E0C5867C90FACF3EB6DC67D2CF8287
-:107390007E43199737E99F0CC50D1228BFE32910CA
-:1073A0007A8B519CE0E4ABFB7ECAEFEDE0F4AA9946
-:1073B000C9E92BE5F52B4F30C58BF6E95D0F4DE4A0
-:1073C00097E146E89EE6CA0D7C1CA8D7CC486EDB48
-:1073D000B26762FE25F2D3989E744B2D6D76517B79
-:1073E000C1FF675F191E463E4CBBBDAB18DF033FB4
-:1073F000103C2DCD9E30FACB642F63FB7D0A5FBF1E
-:107400005890F03277A6E137F38984AF9BEE0CE811
-:107410003E3CFA7EC84CDE6F4D2BF4CBFB21F9A924
-:10742000BC9FF1FBA9057D80D5428E9151BD03E53E
-:107430008823258A47893FD9BEFA7EFEDB3D182F77
-:10744000403FAF86B553DCB4522DED8FFE1ACB70A2
-:10745000D0395BF07F49FF1C7631CD05ED5F872782
-:10746000AEEF93D545741E6AF22085E41C2449C60C
-:10747000CBE8F7C66EBD2191E7BD7DF5DDC1389F34
-:10748000B444CE77D08F53F4E3243B55E8C35F6711
-:10749000833E34F9A5871585FA39FCAD6BB62E57B6
-:1074A000A2F3C4FED06E38AC4CEB4FF6AC886B0048
-:1074B000DE2CF97851FE0D09B8DAB3F1BBD94F4291
-:1074C000BFA6DBCF62490FDF087ED5D829CD11BC1E
-:1074D00052BB3E947CE3F760DCC9E067B960FEFD17
-:1074E000918FD12FC809A95E846B8842F7471F4945
-:1074F00008E6F37B88F938E922EE952EF2B4D19EA6
-:10750000C7E7362F5F2F8627F1F5E5A1245E4EF7FA
-:10751000C68F933D21BED7887BBB5717C5CF071CAD
-:10752000E7B5C6396F15FB3EE06F8DF3A6F1FBE0C2
-:10753000799E32DF2702BB96F05BFCF04CDAF7BC99
-:10754000D0764712BF9F82CBFFC74AE0DFEE52F0F2
-:10755000594AF703867EAB52BEFF4746C08BF9619E
-:107560005509F1F3CFEF15705489F99FAEE3F74950
-:10757000CCC3FD48D017B70AFF6C41D36D2548EF47
-:1075800005E0BFE37EA4CC7B90F42DDBA45AF62368
-:10759000E6E17E649FBFC67FF0F7E23F8CB6F80F4E
-:1075A00072DC583FE2645DA665DF6476D320718F9C
-:1075B00007AF3F87F909EE392BFB59F64FD9CAB40B
-:1075C0002BBBE714FC86505CF874D2AFF2FDC93ACD
-:1075D000270B99E1F86430E58D8CF3061FF05AE033
-:1075E000486421331C6C02FF5D2F178F5B03DD4362
-:1075F000667B3A16AE55DEBFD64FCBED05CF79FF91
-:10760000257E5AE104AECFF05222CC81193BC96AE3
-:10761000376FF6F27572B337D16237CF9D69ADB768
-:1076200045D4DB22EA5DCEFF37DBCBCA20D41BBCBE
-:107630003FF97B3C3967DEA2BCD3F7BCDC0E389E39
-:1076400014D881F2B856E4E96FF9CBA1CC39685F60
-:10765000FCAB9DF2048A362F598E79D4EE66C5A014
-:10766000734AAD563EFAC7A5CD03E7023E5E1274DB
-:10767000AAF4F37954FA23FA6037E675F3F1FB378D
-:107680001F5034939EE85FC6EBEDF3DA2D71F703DC
-:107690005E7E8FC42FBD323E183E70532AD60F68CF
-:1076A000B8AEF4C5DFC10178FAD6323A07D57734DF
-:1076B000B7C7FE71F416057F974BCE73A56D5ABE02
-:1076C00001ED56A627FA514F671BC1D7719E95EF62
-:1076D000452218BE19FB5E9B86FE92DF081C457E84
-:1076E00095F3F2A9465F5C6F12DFE3F03575C721B1
-:1076F000B89E666C8DF05FB6723B56654719B773DE
-:1077000069BF367DD9505A2FE47CD25384BE4D6771
-:10771000C1DD646FB395B4DE39F9FA99BE8CFF8E82
-:107720009EA467347E326C24C64F06AD8D68B3A12B
-:10773000DDAB9B6C71EFDD3825F00EF3F800E71739
-:107740004B9F5ED71D51CFDE4B5C4AF27BE294F833
-:10775000FE1E638FD0F7A2CDA9F7905C36E8744F78
-:10776000A2C4BFDF28FD23C2D3B7798B82B83929E1
-:10777000F2194EAEFEA982F6D6771732438DC34F6B
-:10778000DDF2BA74F7C0B9267D03FD133DB6C4E43B
-:10779000A74BFFC49DC4F5F83CA3544D4AA37C619C
-:1077A0008AE32DDCCE7F8FA3577C5C21BE9432EE22
-:1077B000C754CEE0BF475AB459237A5734F0DF2379
-:1077C000ACDCB98BCEE3B187981FE5BDB2799732B7
-:1077D00017C6ADD8B94B9967C25FBFCA30E5755FB0
-:1077E000E59171EA08DD3B16CBD718DFC7F5FD88B8
-:1077F0008BCB7B47913B8471EB0E7BB012EB7564B6
-:1078000025FA717F54E2FBF55D37D2FD079EDD8ED0
-:10781000083E57DAB6663AA1DECAAB753FF291DF91
-:10782000080E45BCA468A52DD83E39D5E3C7B8B726
-:10783000CFC146D23A778578181BC30F631FE27217
-:10784000724F9257DA59946F3531C923ED0ED24FEA
-:1078500047EC7C1EBB1987779B373016E16147F9EF
-:10786000EF29F4AD8C2898A7123B6E949F02DF4A53
-:10787000FA06FC0DF6928E7ABD42E899A2CDDB9510
-:107880000F4D704F456304F973E71605E32AF09D29
-:10789000F40CD467980FD577278F2755C0F7792632
-:1078A000BD22E71147BFDC86F0B9DF6B7B8DEB971C
-:1078B000088F230B7863E9797F12B7DB4A6059A5FB
-:1078C000F77A6828FA9B477213A83F29EFB1F2793B
-:1078D000BFE0F3BE9BB62B3637C5DBC9FE92F0C9BD
-:1078E0007AC79326CE491A837868233C546DD268B0
-:1078F0003E93F5D2C18B4CF2B048F477F0AEF7E985
-:107900005EA00D3F3F46FC58D5A470BBBFE9987EF2
-:1079100007AE2BA1E754DC1FB9992FE5EC71715F1D
-:10792000D6CD2D5CFF56B5ECD2F07E49C9A739679C
-:107930000ED23D5B55CD0E86FBA5C07FDF43FCC458
-:10794000F2A9C48FD4AFBDD113F4103FA710D24514
-:107950009C3A9833DD13D5CFDBBC627FD4CDDF6F8B
-:1079600048E2E528FF04572559F4AB8BE422E7CC25
-:10797000C883980F5AE557E85C656AB1F87D321301
-:107980005CE6F331B1FA11E3E13C7ED29E3DDD7459
-:107990003EAE5BCF8BF64F20BDF9FB087FCF7271F7
-:1079A000BD96F0C7D2EF90B0C7E3F0593829CE3A70
-:1079B00026D7F59CA7776B788F92E49F9B91EE2654
-:1079C000FEF95912BF8FF767491AF5FF7811DFA743
-:1079D0007ADCCED7AFC7EB9D94BFF9FADD3C9FCCE4
-:1079E000738F1EC1E761DBEC4AFC7EB82F8763A56D
-:1079F0006D199DF703B96C4E22FEF132AE1FB93EF0
-:107A0000DCF012D767952137DD775A19BC7D2EE55A
-:107A1000D9A6BAFC743F68F035FD0E4F4FBEF2EDAB
-:107A20003E40BF8B7C7333973F4907D0A7C45F525A
-:107A30001E245EA3F8E47897F224E9B14DEE0B0022
-:107A4000BF70FB88FB23F94CA5FD9F3267E0089EC1
-:107A5000CB2C13FBA5F9E2775FE47EE96C4197023A
-:107A60005BE9AF719E3DF64BAFD0AEAE58FAAB615D
-:107A7000180F29CF3C4A4F29B7E0F759E4FB7D4165
-:107A8000F7C3E2F9B1E09B8AD1CD2497151FD592B7
-:107A90003CBBA770BDE67ECFAA8F195B27E6BB96DD
-:107AA000DA4F4E6C2EC1FDC6C93F560CF4877B835E
-:107AB00073019E5343FF68D321EF2CC4AFF87D2997
-:107AC000799EE70BA1273A76A8E2F7366BF54BD9FA
-:107AD000DF97EB8F458E2B74EF89F0A93A76168FDE
-:107AE000FF18FDBA1D49F4FB279FEDBCEDFB1FA756
-:107AF000E2EF8BDCE0473B21757929F14F579ACBB8
-:107B0000BF95C73DA7605CA7BEF99017CFFFFC6F7C
-:107B10005968C8A800800000000000001F8B080002
-:107B200000000000000BD57D097854D5D9F0B97359
-:107B3000670B994966267BC832091050499884849E
-:107B40007D9924844516270805641BF600D958DA68
-:107B500062A57F068388886D68AD225ABF01C16225
-:107B6000B53560A441020EB208553F470A165BB412
-:107B70002322B284648AADA55FF93EFEF3BEE79C82
-:107B8000CCDC9B09A85FDBE7FFC3E3733CF7DC7B3E
-:107B900096F7BCFBFB9E33975FEE5760B01362B65F
-:107BA00068084920E4CA6BF21AAF8990877FF1EA2E
-:107BB00088A185842CF74A71064248EBEEFFF89FB6
-:107BC000D478422A76D658245AAF7FF94D7D80BEAC
-:107BD000A7F16E67CF77C75AE0BDCB2F6C1941FA7A
-:107BE000D2F6C67A6CBFF2C276ACBFF58B570FFDEA
-:107BF000177DAFD215E380F7AEBC76580FCF2BDDE3
-:107C00005A67232D89FBA87EAA99969E976492486D
-:107C1000C878C2FE9EDA73586FCFA5F5463A2AFDA2
-:107C20009E4CD77B7B65D1EF1AF7681798E00D2F34
-:107C3000214574DC5FCC1DEC867A335D444AE8F95B
-:107C4000463DF1186DB4EC4648142DAF169B3C52DE
-:107C50002C5D5789692394577F15351DD65BAD0F71
-:107C6000E458613E7D8913EADD011E4530CE0A5D90
-:107C7000B509BFC77E3ED41102652EF1908B7DE819
-:107C8000FA09D979AB3F8CF76B841F7D6F50540193
-:107C900021D3667D2AC17CA2FBD6EA96E33C5F66CF
-:107CA000ED74D5E1ED0356D3F1E8B8B7E06F64A801
-:107CB0002CB298F07D0A102C539BCAD3ECB0FE78FE
-:107CC0008303D62FD6975AE1AE37D3E7F7AE763B8C
-:107CD00064BA8F6F5C3A35BA3BADFFA28FD45F8632
-:107CE000D76569AE8BF65FED31E138556B4AC867F1
-:107CF00074BE636017E9F78916123F84AEA74C4B38
-:107D0000E24D5012725A5700FDEFC276BB8138091E
-:107D1000C503FB9BD376ADA39F3CA573A714413F3E
-:107D20001BFD7A3B943BD9FCE9F7165301F6671922
-:107D300002DF1BC94AF8AE7DDD84F84D12F6EBD7A1
-:107D4000D942F3262498313597F55708701AEB99E4
-:107D50000EEF13BB1ED777055EC17DF4E4CDCE8553
-:107D6000F209365F0D7103BE24EA69897075679563
-:107D700053BC596429765B8A42656237D6AE86EB7E
-:107D80004E68A7F0BC6071624976C71132B8F37BC8
-:107D9000A214F07F6B5A9B3E40C77DF2C0A788B704
-:107DA000D580B730BEFB821ED621F076217C42F70B
-:107DB000E1A9FD9F22DE2E6C96103ED5CDC5FA05B9
-:107DC000B4BC5AE7249F69699DE3DF53526031E0F8
-:107DD000B5677F94651785539BC0CF864F2FCAF434
-:107DE0007976738A5D82E7FB199E1ED3683C00A7F3
-:107DF000633BEED95E2F85CF731DC247AA2048276B
-:107E0000D5B5C46BA0EDC53F5F7D6A1CAD5755105D
-:107E100007D079B50A8FB29E3FBF01F0C55A490A13
-:107E2000A3ECB0CE4F4677A7FD57579222A0D3D4EC
-:107E300051CEFD5027CD12E905F50AD74218FFDED5
-:107E4000F8A50E99F66F1DE56A82F1EE8D1FEE9092
-:107E5000697F4FA5376E30D2764F19B1EC0238E802
-:107E60001A4AB4B4FE5499DD422149E1B63319DA15
-:107E7000491FBD6317E0B17B6125F4579D3CD301D9
-:107E800078D289FEF7AFEB03F3ADB6777344D1F741
-:107E9000C7374B8857C4632230FF6A0A5FA88FF741
-:107EA0000EF5C27CAE71F80938B6E9FC73607E6DE0
-:107EB000AF1B8887B68F1FC5F0D53AAA11F9C7DB6B
-:107EC000FBC79C90F2427869DE67F041DDA6B548B9
-:107ED0000EE04BE47E03CC67019F4F838ECC75D1BF
-:107EE000EFAC63593F3D364BC82F7E0DF49400A58F
-:107EF00086977A8EE70DACB478F25C141FAEF1FD74
-:107F00004734A1FD2EE7F852B5D087F454F90AEBB7
-:107F10002FDEE0CC5F1586BFF1A504E978771499D0
-:107F20005B4E9FEFB6B2528DAFA7395D673DBF1272
-:107F3000F77D01DD77D8D7D4CDF439C08DE205C007
-:107F40008DEE23E2C1BDF14B70DF166C961EC07D35
-:107F5000F40C20504F8863EB54F77F96F3C5DD5146
-:107F6000AE4289F6174C303B7648301FA7260AEA06
-:107F7000F956C70E02DFBB76C2780949518EFA3036
-:107F80007E4588AB5043C7B9946866FBED7D5F3B87
-:107F90003917E8D18EED0932F111E43F24DB951B4E
-:107FA000FAAEAC07EBAF8CF737A1C19347B2193CDF
-:107FB000102E1C1EDE75DDA687F3D34F383CBC7730
-:107FC00091E9C0378EE989C908FD5BE838B4BFC4C0
-:107FD0001D435FD884F3ABC77D7BDB62C1B22CCE7F
-:107FE00055580B2CB8876B35C045AC530D8F451CCD
-:107FF0001E6F4D9B93AF013C9E627200DD3D794048
-:108000009A8F78ED3152A204BC677448E87E005D17
-:1080100010B716F7A3BAD6E58D8CF7E54867D5F10A
-:10802000518E2809F1DE89F2CF63F232BC67F22F5C
-:108030007A2C9357C027CB733BF303C16740BE0133
-:108040003E0BBAA81E11C881FDFDBA7CA54DC7E83C
-:10805000BC8DC201E848D08DF90D462F9BD6D98B37
-:10806000A17D13A5FBF0FD3EAEF720FD1ECFEEE691
-:10807000807E619E2E7388BF67585C362B8577B5EE
-:10808000C6B7419B15E2C7D56F3C96E38E807F82D1
-:108090001F1BB58CCF19BDD15ED62F1BCF48C16D2C
-:1080A0002EC0D203F2287A0D838FBA9F5E56215FCD
-:1080B0008D960B548E4FA29B14DB8390B11A772FB1
-:1080C0002BEDA7CA18384E779664AC09EA611E8971
-:1080D00020BB807E76447B816F252612F7DE08FD6B
-:1080E0002659191F10FBD26063749418C3DE2FB693
-:1080F00032FE50686578792F2FC5FC05FEDB35EE22
-:108100004F89DCB51C13DFD17961BB980FFD7E234D
-:1081100061F217E79BF870CE8E4D61FB11A2A3BBF5
-:108120000A609F7A6CF669E79B42E30879AADE7FD2
-:10813000983FD00FACA7BC6FD7EF351C66F4A8C62C
-:10814000C772CE1763AD84BDA7F3FD15E96A8599A3
-:10815000EC80F96D25CE383AAF9A43BD193D38838E
-:1081600039D0FF119BFB15D88F81A3389ED3E7939D
-:10817000E9F3E55AE231D03D59BE5BE70D1819CD60
-:10818000DCA2FF95D858FFED66A347A6787EC6E629
-:1081900076037E794A88C30772E907947F00FD1150
-:1081A0005F11F0971A1288013857CBFE1C42F77FF7
-:1081B000B0C9BD08C63BAFF167C073420288AFE7E4
-:1081C000A262F208EDAF49EF4BFF3ECCFBA44C7628
-:1081D000D07EAE13E77858C775BFC6E6A1EBF8B8F6
-:1081E000F977BF3A40BF9A7DE0DAEC87004A9BA25C
-:1081F000E73C4BCB59468D51DB3F048F73E6C8FCFF
-:10820000F5871C7F12EA99DE155C67F0027CD4EFDB
-:108210004DB0B1FDAFB9914A3C71E1CF191FADD15D
-:1082200006F5A042D6DCC8201E3AEEC71A52D11875
-:1082300041CF0C5819FF6AA2A81FA9FD738E67BB16
-:108240007524672BCC673BE583003FAD1DF945C521
-:108250004FB31C9B68B5293B781CF488E0CF24E41D
-:10826000FFE7748CEFD0BF29C60121F909EA09E8BC
-:108270008715168F4F43F946C56AB34FCEC3E7DA69
-:1082800061B0771E8B16F8E07C2E1717D4BEFD77F1
-:108290002986B66B897118FDEE0BD3C218100B8BB3
-:1082A000BFBB2A1194EFA4590D489F848CB2803E25
-:1082B0002E3927C8B7A26FA7CF69516F477CA1FBA2
-:1082C000EBB2B95E80FD9E15CBE03D6B55B4D71384
-:1082D000C6FFA671F8A8F16C37E0289DEF2712932E
-:1082E0002BEA715EB595DC07789714E3FA35F6BF93
-:1082F000EA9A829FB54981179F057C5C6176EC62A2
-:10830000DD66B8C2E8E51D31EE0D0DEE5F7BBE3FC8
-:10831000674D16E07D30E3F714CECB5B0C168F1D56
-:10832000DAF58AFD3F5F47195F4EA83EFF52CFD175
-:10833000C404F0776C007C58B0319A78FA84D60186
-:108340000A37E077F50D82FDCC6F79FB2CF0F36AEC
-:108350006D00F167BED184FB537D438BF3201B7509
-:10836000AD01F13D95BFFD629C2791BE1E1D66BD0E
-:10837000780F7D98449FE3FADDEFC3BA9F8E8E217C
-:108380004E462FDEDE74FED78DF6581B85578D9E28
-:10839000E2473FECC6650CD3AF489A59B9FF2D2789
-:1083A000FF0EF3596874EB41DE2F9A5EAB07BA9C5F
-:1083B00015EB2BB2F40DDFF761F2AD7BBEFEBE37DD
-:1083C000713EF4B19ED245043AFC9CC37F02E02486
-:1083D0005DDFC7A98C7E3ECE20157BA1BC9B96F4A9
-:1083E000BB8FB379BD80D5D5FD44D9183D7F9CC7DF
-:1083F000E4956725931FEAF7FEC1C773D99C5F0216
-:108400003CC573A78D3D7FD5E6FC0A9E537EF85F81
-:108410001C5F7D56DADFAC370D88AF647D3007F620
-:10842000B1635D397CBE8991E7956163FC98F62B59
-:10843000D98AF03D27EAED87A2BC60879009943F76
-:10844000033F5E994E801FD371A36CAC5F9F15DF15
-:1084500033E03AC846CAA729DEB617D9715F361588
-:1084600053FC043E71D060013E21F049E0911A7F37
-:10847000126D42FE31397C1FC86119E570A28DC9A9
-:10848000613DD039ED51CFF4C19EB8DF8867F2D796
-:10849000DFEF3D46B68F94DEED3694FBBEDC707A9E
-:1084A0001370167CF2E36E4ABCD8CDF9601F0EB78C
-:1084B0000E38DBD87BF13D98DC13F6C120BEAE57F9
-:1084C000383F17A5906303C72AF59257B85EF08A24
-:1084D0003546EC4B21AC5FC8BF4EFBFD1CDB6FFA91
-:1084E000DE6058CF2C43704E1C955FDFA17A91BEA1
-:1084F00000BF6B82EF3AF9294631B95BB3D24C40E9
-:108500002F28B55918FC0B8319D01FE913443E34AA
-:108510009F507E23DD79FFC02790426964690C93E8
-:108520003B924C07049AE943ECD01F85F7245B513A
-:1085300008DEEAF1CE4113D503A7DB242DEE573E2A
-:10854000C987FD9AF3C197E6D9B4CB6B16A347430D
-:10855000E5C87735EE59D04FEB832751EF3FA7F7AA
-:10856000E5349822B4EB7DCF3F2D85DAE7BE247B3E
-:10857000F494CF34F95B7F368DE2E57CBFEC80214B
-:10858000E7AFFDEB7B03419FF6EB1C60D7527D62AA
-:10859000B316E65DCBF4CF731AE5FE5FFD1EDB5F1D
-:1085A000517F90E30BD5B3B46440885F093D6129E6
-:1085B000F1F5027D620171EAA13CBF62C90442E1AA
-:1085C000B7C8B41AF9D8E595E3507F5E4C3CD8BEE5
-:1085D00060A3EE7CB87C59D4A0AC2FD9AAAC2FF5FF
-:1085E0002AEB42FF4A288DAC57BCC8F9D0552A2E39
-:1085F0006EA7576CE1785BFAE884A791FEFD3A62BA
-:10860000A0EFAD3E589C4422F42BCA9A1BD9C41B40
-:10861000268742FA470EF1F687FE6EA23FF079AE4A
-:108620009F407F60EFAE8E7226815D72B524F2BCF2
-:10863000B7F179D7DCE8A6E8FFF94E7A4E0C8E53F5
-:1086400073C38865E77998F0FBAB8B238FB3BB438B
-:108650009FB228E469E8FB7826FFB83D2FF0A1E639
-:1086600046323E1775A16787BE4BC3FEA860B35C58
-:108670008C0EF1235D37360F81FF9F49C49882FE2F
-:10868000B12DDC2E71E4819EFB19E851407F63EC33
-:108690008702748A0B1E1A9CA3CD0ED1877A1D14F3
-:1086A0008FAE04C2E4FB219B391EE5B28338605CC7
-:1086B00081DF731E2C8B75D3F9FE696D6992BB6FD8
-:1086C00038DFF4E0F8D57AA1BF9914F298A8E4F560
-:1086D00082E693A89F2D34BA7280C97C7EF041C493
-:1086E000EFC5C4950878DD7EB07786FB7F21A7C5EE
-:1086F0007CEEF7CCD3317D9C122DA5B7C97C3EF71B
-:10870000B730FD506374EA701C27B15B12D1E46688
-:10871000F3A5CC524BEBC33BE60FCE434286F1F9B7
-:108720004BF03D85EF705E92F9EE6498B701C6A5F7
-:10873000E345116F3294F5831D7628474A2E2D9B11
-:1087400007DBE7D1A4360DDED71803325B279D4146
-:10875000227CDF012FAC9B797DFD94EB7316C173F6
-:108760009319F9869ECFE316F03F23F21323ACDB77
-:1087700060F25D86759979E92961FAB6279B38EA36
-:10878000E96BDD482381714DA66B1E58AC855824DA
-:10879000A84759AEFBC0EEB866317934FD902FCAB8
-:1087A00071147EADD2BB8B615F281F667EA8AEDAE6
-:1087B000B53EB477045FB3F1F9D573BE9642181C89
-:1087C000E289EBB093F2859F98174F2031208EDD20
-:1087D00038FE3331634FC07C01F028AFC76ACF87C2
-:1087E000CB8B049756C1B792A62BEB296E65DD485B
-:1087F000CE59007F259F2BF9561CDA717DC02FA31F
-:10880000E3FC624A37362F813FD9711A853EE1E297
-:10881000767DB54D4FD01F986834927EA85F64C7AF
-:1088200031FDE213BAD3D4FE0B221FCE1FE9ECF5C3
-:10883000330AE70D1FC88E87E93E6D30DBD76941EB
-:108840006F9B21313D5DDBE8033FCFF63956C726EC
-:10885000688F72FEF8BFA1FD039980DE5403FE7598
-:10886000A4774B317CB73DC382EFC59706D12F1A51
-:108870007C8CA05ED4094F6FD2F95378BF00750A83
-:10888000DF9A8596E5AFD0F7535CD10E29AC7D27F2
-:10889000B4D3794A1C2FE0F9C80160C7B2BF1E2DBE
-:1088A000F97E27F8299C32CAB59A96FC23263A8F7E
-:1088B0001EEE7C07A06DCF161E47893778591C81A4
-:1088C000522D9DC754239B474D4BF17D45B4BDA709
-:1088D000BF3F817842F409FBCC4A68D250FB19BEF5
-:1088E0002B8946FFD569EE47229C1F0C54D1DBD063
-:1088F00010FE637BBEA853F1EF1CC0DC13588F67DA
-:1089000074E020E28FD1E71012FA83EF4B43FD2190
-:108910003F1A156A0ED11B5D5A81D1515F49DF3B69
-:10892000563E06F1B006EC27BA1F03B5BEC340DFC2
-:10893000437999CF4B32BF01E1B9699D5306B8170E
-:1089400011B7BC85D60719FD71400FC38C8175091D
-:10895000B4BFC1D3E72543FD20285945A86779C096
-:108960003F6F3569BCEB7013F31D4037D3A6333F1F
-:10897000EBD4E9462FF8EDA76A098B6F69DD59DF63
-:10898000A1EDDF99C5FCBB509F15E63F11F18CD3DB
-:10899000D41ED913C19E3C18C7E493F8BE66BD5ED1
-:1089A0001137DA1F67C2F6FF881BBD360EF1DF9D57
-:1089B00005F4F7701CD7ABFA903EC057C2E87E03AF
-:1089C000BCD75AFC4E577C41D9CEF9C254E74F75FB
-:1089D000A88F73FE20F8B00BE8907EE7979C3A8052
-:1089E000E747250CFEA78A97227F9846DCF89C2251
-:1089F00088CE15EE371A1BA6C7D071A6BA947ACDC9
-:108A0000B4E96A3D87E1AB1877865BD93E59E8A99E
-:108A100063957AEAACEFDFB4A2FC4D7AB1EA562650
-:108A2000C649D0DEAFA1FBC4E2245A163759AFF7CE
-:108A300082BE53D3BCE25802D0D15AC2E9688FB487
-:108A400010E3387BA44561FA43F74AAF047CBF3793
-:108A50005D931FF73588F1A1D33AEF61889B9C5E47
-:108A60004A574CE77944CFE28F47A38807FCCF02EF
-:108A70003FCD9399FF94A231C641D22CD10ED0CBD9
-:108A8000376A0AD0DFBA31C6EC08F76F6E5AE72EA4
-:108A90000BF7B3DA0DA4C0C2F126921D7B8CF3C391
-:108AA000A724E6EFF6CC30A2DD96D0C3A5882F240C
-:108AB000C8E42CF80DD7C6D951DE3EC5FD1A109F6B
-:108AC000EB4F4BAF4405627CD8F732598F7E461589
-:108AD000FF498873A07F3F213617FDF4D35BF277FF
-:108AE00022BF3145397A49A1FEA7BBB76B1781FE7A
-:108AF000D4B25DBBD014C2BBB3025FA34934E06BF8
-:108B000087DF6EAF01FD76DFD5B8CE015E56EA7D18
-:108B1000794489CFF8BC2B39B684E38BAEC4356376
-:108B2000119D4FFB7B7AE6C75A4B905E5FDB6F452A
-:108B3000BFA376324179B2BE98203EB46F97504FB2
-:108B4000FEC25A81FAFB7AA901E5449B6D34EEDF3F
-:108B500032D351B44F2B9ED39D0FD7BB96ED54D635
-:108B600097133FDAC795AF74C267E45F823F563709
-:108B700029BF233D95FC319FF3FD0297E3FE329818
-:108B8000FA74470F661F139F81AEA3E85D3DF7F7A8
-:108B9000CE627293BC2881BED56EBE24333A67FC88
-:108BA000B888F7A79643455C9F1A41F916D89142B9
-:108BB0003FA2EF63FDA8A6454ED684E655C8BF1375
-:108BC0007A99E0DB625F8A07812D4C48463CD76F7B
-:108BD000B24936EC2BED1FE9818EEBD1DBB07F0F74
-:108BE000D85F43F97874DF3D20673D1AA317F0681A
-:108BF00083548B7CDA4838BF96DCF5F0F16F3C1E6D
-:108C0000E4DB8349EDFD13B2805FFBA3011E141F5B
-:108C1000B2E3C3F0A49EF832F6480A7CC1F656EBE4
-:108C20003B11F145C817DF474CBF184F570CFD9457
-:108C300041E08696472566CF8D313DA985EFDFD18E
-:108C40008C437C184BBC5A985F9945B9CF63929579
-:108C5000F571F64E7820C3B84E0ECFF17D94ED4EEF
-:108C6000C1D78892AF65919BB8CFE4B1E3DF05FB34
-:108C70003E7A0DE9037A07D51091DED4FC6054BC2E
-:108C800049A11F85C53D46C527748E7BB4733FEE51
-:108C9000101258FC8AD4195FDA8EAD9193C3F04A52
-:108CA000E0F11B3C4F427A93C7570B995F2F24E7A3
-:108CB00019BE0CE0B521806FF4FD45024F32492604
-:108CC000E0C9F0E6289F4CE19ACFFB1902785310D7
-:108CD00092E73E8DC9AECF06FC706C94E5CE7A7BF0
-:108CE000A2CD8E78D25F23E4BB238EA07C6FACD75D
-:108CF000C2FCF70FECEE3629F06229E28544F1025E
-:108D0000E9AA935C54B6ABF046ECDF09AE2F8F2195
-:108D10009E9E301E656347415FF66531BC29234E38
-:108D2000C493B7B3C7F1F8B35B8BFD10A53C2C35EA
-:108D30002AF1408D5774444DF8B86A3CEB0A6F3203
-:108D4000016F843C8CBB33DE3CDE35DE3C7E3BBCBD
-:108D500051E38BE0277BA22CA5A097D65448C88767
-:108D6000FBBFD7B31EEABDABB2308F658FD5817A1A
-:108D70006B4D2D6B2FF43B65C873E9B19AB767B99A
-:108D80004AA15EB386C51B8A4EB33C989E6B597B45
-:108D9000FEC3B547CC20DF3DECFB372E6F906368F8
-:108DA000BB7703FFBEB8A114EA351BD9F75F40BCFF
-:108DB00088EEEF80B3DE7A787ED7E62C07333F99D2
-:108DC0003E3B92E3E91E69EF11FCAE817DB7E4B84A
-:108DD000B11B413D98E9AD23F83A473EC7D619FF8C
-:108DE000D9BD63ED147F17053DA8375DD4540E40FF
-:108DF0007ED3859D592C35A44149F106F98CD34881
-:108E0000F13A9BC51377D021DE8E677AA088C341E3
-:108E10005E40781EC0DBF14CDE8BF7126D84C58D91
-:108E2000B799D1AF2BE284BEA7890474066BE4F234
-:108E30003F62DC704C8F5A8C178EC914F1C2807659
-:108E40003E1D37FFD697A323F951FE938F7B89E709
-:108E50003988E715DE2C0DE0C51E4092540052F50E
-:108E60006F416FDA037E5426343C6410EC2BAB9FC9
-:108E70008B5FB6692335D297686AB51E103219D454
-:108E8000FEA25D4FF2135F6C4CE7F98FD1121FC841
-:108E900027A265F35F5C4FE5A014E24B5305DB1995
-:108EA000D60BE9740ADFA7CBF15CDFE84FFA03BF0A
-:108EB00099CAF7ED3BC65A1D93970D3A15FD5F43CE
-:108EC000FA7FA64BBD59D9AEE20F157CDCC55C5FBD
-:108ED0005E4A82A8175C94BC585E7A86E9CBCB4D7B
-:108EE000A751AF68DFC6F4C44A1240BD43EDF75B3B
-:108EF000BE5B59AF6A54D66B9A95F5F65C0F8ED36C
-:108F0000FE4CD500F0BF556C7D0FFDBB15824F7830
-:108F1000957C822A488C4F3C7D37FA6D3446CA27AF
-:108F20000A015CDD306FA43F71C6013F00217B8BDD
-:108F3000D61F834F52685DE38A49403FD6D8B80BAD
-:108F4000627C19E3B2EF39EDA17DE9B00B557C22CB
-:108F50005FF8637ADAD05F25F8463E617242AD175A
-:108F6000F54950DA3942AFC807BD82E2855F63F246
-:108F70006A34E17A8417E98FDA8BE3A3B201655C86
-:108F800032D4FBCF2834F27D27AA7DED9B707B7B0A
-:108F900049D9AEDA7761AF0CE0FB3E83B8BBC33E84
-:108FA0004C21AE6320174E7D54A1B0933EFAC368A6
-:108FB000E147417BE99BDB494EF9DBD8491DFB1DAD
-:108FC00045F5465A964E1ED7EB6710DF6E8AC2BC37
-:108FD000CD1A89ED6FE28CD319E17EC3537524411C
-:108FE0001B46EFF5E30C4688EFD5EB981D3179FC75
-:108FF000C703E687F18B178CC52E80D706C9FFBD46
-:109000003F825D7152269817D39280FB7DBD813ED1
-:10901000A77876FDB97B1C1EFAF8AA8EC50BBF9007
-:109020006A17432A9398C7E235BF8DD252F9752546
-:10903000FA10C683CFE8DDB301EF96BDB30FFD9103
-:1090400095A077F708F5DBB5DFD1837689FE2D266D
-:109050000783523707E625104F4E789C685622E367
-:10906000AF676CAEA5307F21E784DFFFDC8A31B1CA
-:10907000200AFE429CB1109F94284CBADB3A8F071D
-:10908000F900EBC3FCCCE7A294F105517E2F81F9E6
-:10909000BFF7012DD1F1D2ACCEEFC3FA2E717BEF29
-:1090A000128F535D8A6171AB871318FFDDC7BFDB79
-:1090B000CACB4B3CAE75C9A6B413C57BDBF877179A
-:1090C000EA8CC6F561FB687FDA50EBC53C289EF759
-:1090D000B19A30BB68BF75FBA6B0F8C1AE84E27D23
-:1090E00030AF841E4E7D0AC06F3F93BB1047867819
-:1090F000EF308BBB01E0556D274E8897127B407F88
-:109100003FC40DC1CE447D81E1497B142BC5BC76A3
-:109110002594EF4338AF0820DFEAA897337EB82BB9
-:10912000C185E3B64F15EDBCFE04AB13EE2F10FE68
-:10913000EBAEE258EAB815CC18F5EA28C6B7D4F178
-:10914000EAD9826FF178F52CCE8766B7307FF81CAC
-:1091500023D9D09DB6CF6D4962F6618C274711AFF8
-:10916000F6447FA33C05819FEDE9FE8E38EBB6B057
-:10917000386B158FD35589F53529D77724A1CB388E
-:10918000EB9184087156753C7F1FC8F39E2178AE21
-:10919000B4B0F597C995A57AE00F0B09E67FAF3C0F
-:1091A000B9A0DE48EB2B1F034F1FF221D44FAB3881
-:1091B000BCBA9A5F824B43EC0ABF7037620FB3832D
-:1091C00053DC36451D35DEB0FCC9EE15A98AEFD358
-:1091D0006BB315EF67AEB95BD19EE52950D47B6CBC
-:1091E0001CA278BF574389A2DE7BEBBD8AF7F34907
-:1091F000762CFA8F4EC8E01B217779272BDAEFD92E
-:10920000FD80E2FB2F48ED53C3E87B4D518CFF13EB
-:109210008FD3DF7740285F38B771BEE2FB7AA97140
-:10922000808FBEBFD0CFFCEBFD9A9729FABB1A33D3
-:109230009AD90D3C4E584BFF31FE6D9751FF699600
-:10924000C836A973DCB0A265CB86EE2452FC90C967
-:10925000F56554AE83DEA4D62B0C893C8E944A521D
-:109260006F85D155080F4CA8775D7F4E46FF593E5C
-:10927000C9797A18C24747BCF6CEFB759D30BFCE80
-:10928000F557CC0EF08F2D39B900F1CF90ACC483D7
-:1092900028BB120FA2FB28F1C0EC50EE7BEC20E5BE
-:1092A000BEABE16C752AF140C051C0396EAC122FD3
-:1092B000047C07D17F00DF02123C8EF9D15EC9E148
-:1092C0002311E2B2CDDB711D77D2D3F255F0EC7FE2
-:1092D000D4596F4238B17C29A11719B85EA2F69310
-:1092E00077F85712B9DEC3FB117EED0D9207F59C9E
-:1092F0008EF8D5205F862F0BF49D5AC2FC23AEB2A8
-:10930000C4C87E347CDE951F4DC051E831CB418FFF
-:10931000A1E32C226EE44B17B81EB3C4F424C6019B
-:10932000AFFE81C1B78278915F7FE3B836D50B4934
-:10933000987F510D47A945F299810E38DF4E252DB2
-:10934000826FBB31DF81A29D7180229EA0D43B89B8
-:10935000530AE74F420F15E309780ABE25C633903A
-:109360005A3919E840C5C7481F753C43E9E7107EE4
-:10937000111C2C2C6E31B0231EC1ECC2909F8BF9B6
-:1093800035E4CCAC7A02FAB645F831FC33E1B9F0F9
-:1093900063A8EDF93BC541EFF7488167B33AC73F92
-:1093A000453C952EF3B33FD28F8749F674186FF280
-:1093B0001BBD138826921FCE71F600ED47D604E33D
-:1093C000C2FD63C25FFDB614C0797F87381F21617B
-:1093D000FA4235691C3D330BFC9D546EC540C9FCF7
-:1093E0003CA459AD8FB2F8A186AE04F07B39098B4D
-:1093F0000F6685DAB12E77AE8BFC943BC9F75E49D8
-:1094000016712E2587B533FE26ECB5AEEC2311BFC1
-:109410003FA6A7302908E5A33426723F561EC9830C
-:10942000FE295D352526803D4EE9500AA7BB8EFCFE
-:10943000156CEF4477AAF58BF8BD6C2E443FCB82B8
-:10944000F0F57E0D78083DE2065D1BACF7478976A6
-:109450002CABBA9DFBD009CD857E451E628D9EE565
-:10946000FD9246A5FE7C3651C459999D71273875E9
-:10947000BD0F3C9F8BEFC3D7D587443E9780DF2736
-:10948000820F86E07D5E01CF0E7BAD03DEE723C158
-:109490005BC0E35A91FF45D827D97C3A11E09C1470
-:1094A000E3FA02F862FAD9C04549139A5799DC8A5F
-:1094B000799CD79B65B48FAA87B37C9EEAFD18245C
-:1094C000276D2D068C0356341F41FDACB58E32D26C
-:1094D0009E5DC3A963BD2A787765AF88F5DC52AD80
-:1094E0005FE487407C3FA9E8B67050B67338887C4B
-:1094F0009632B96F6C20CC2EF1F17D8FD2BAA29248
-:10950000E8F885BF4B8B01F894C92DC753010EAB0A
-:10951000253C6734D2403CE0DF4FE1E7CD06056AE9
-:109520001D160A8FE434139E1BEAFD5DD905F1CBAD
-:109530008F57AFB2C1B9A82B7574686A77F49634A7
-:109540002EC437B2F7931F14425C6D16E617CF3660
-:10955000B0787FD6F7A27D3D289F78534F8C406F1F
-:10956000BAEC5A3C5711B4CA686FC4CB6414E09784
-:1095700080737C345B87785EFCF39D12E42189E77D
-:1095800023EB83FD57D2F273D8F784D03A4796067F
-:10959000FBD79A427016F97D441BCC981C461F4796
-:1095A000383CAA13F41B401EB619B91DC8ED416220
-:1095B000D1221F59CDE3EBE77A11E2C77E7C66C862
-:1095C000A7AA8E72C60E04FF16E40FD0E22F16670C
-:1095D000AC15D76F47BD7935D7AFDA787EF6EA712B
-:1095E0002549604F25D447CE631A9DC4F4FC4A1E1A
-:1095F000F716CF2BB53ECC47AA847CE1B0FCA86F10
-:109600009A2F2CF2C4BB8483554BB4140ED512711F
-:10961000DDEEBD03FF2347B477AB9234B7CD635B78
-:10962000C8D727F2D3AA213F8D3E5ABDBF388944FF
-:10963000E8AF43DEDC18A2C80B13F9CDD53746607E
-:109640005E58E9A3AD78BE0FFAB19B4279695DC15E
-:10965000F948229B4735E48BF50F7FCEF847A8FFEA
-:1096600078DC875F0200C1CFD12CA31FF697273487
-:1096700063774498EF16BEFEBB13B4481FF7F88813
-:10968000737B84F1C57BE2FC07C0B93CB7F3FC9A5D
-:109690004A027360FE90771A69BCF549CCCE16F386
-:1096A0006EB20516733CC7F3171D758B721F5FE012
-:1096B000FBD8746F2003CF118D8B9C072FF6FBA670
-:1096C000D9FD26F0DBCA69F465F0B36B6B254B1846
-:1096D0007D75B5DF21386B14F97F9DE1ACC7FD15B1
-:1096E000FD097BE4F25619E3FB974F717A244E9300
-:1096F00044E96A1E975797098B135C6E90D00E99B8
-:10970000EF26640DE52BF3762EC738CDE25DFD37ED
-:10971000809882E76B29FF98974CC8085ACE5FAFB4
-:109720008CD32EDCDCC9FF46C2E522553BD1AE5EB0
-:10973000FCA4F2BB0AB2F9CFA0F754A8F49ADEDC7D
-:10974000BFB52F89DA09A0D70D200380AFAFDCF5B4
-:10975000A51E526DBBC2F32B949E7B6A81FF59B04C
-:109760003C91E43C08FCFDF7496E1F94ED1F303836
-:109770005CAFBCCEF8FD73F128670CC094E9FF1A0A
-:1097800066B278EBA3944D409CCD60607A8DD0E7B3
-:109790006479951C43DB077FBEDA06FEBFF897C7E6
-:1097A0008C057D3FE1E56827C06B53B1331FECFFAB
-:1097B0004DE526CC5B301A589CD7FBCBC16F81DBC3
-:1097C000BF67E39612B03F2D2D877DE01FD9A8F922
-:1097D000339E1BD93882E5B575E44FB694EF81F915
-:1097E000644C61F262539633DF12D62FE1FA593599
-:1097F0008759FBC1DE3F86F3EACF9E40F598AE2F36
-:109800001BFD707713B69F227F0AC60ED7435BA954
-:10981000DC81243C51BFBB51F2E9E87AAA9AF66098
-:10982000BCA2F2615FE24C902F2F6931DE23E61774
-:10983000FF664A09C475845C992959989F91EBD9B0
-:109840003388F86371A1E91C0F6670FD7A66348372
-:10985000EF7CE2C880EF1E309218F04FCF2C6D2CB9
-:1098600042B9B35C6705792EE21B5DEB0191FD44C3
-:10987000D52F9AD9F9572998039D5CA1760761FEE7
-:10988000A28879BFE6644E67395CDFEB499C104FD4
-:10989000AB3ED47B3BF8030CDD58DC95F21BE3A018
-:1098A00002D4778D60C72C3D10E5637E6A2F3FE7B9
-:1098B000EACC87FC8F9AC9690598877096F20D33B8
-:1098C0009C1F0C64209D527E22519996936C9EA001
-:1098D00085737EA9549FA2F5295B53276829BE573B
-:1098E0006707166B687D6D72216BBF3B7011EA1BB9
-:1098F0009247B2F682C06299D6B7274F647530ECB2
-:109900002862FD3A79CA040FEDFF8A95CB694700BA
-:10991000CFFD56BFD15B13EEA7DC06C90B143E5733
-:10992000B8BFF54A16993B19E0DD2780E7CAC47B2A
-:10993000FF87BF27F27DC53AC577243972FF45FC02
-:10994000BBA5FCBCEEC868B2318AC5A53C3114FE8B
-:10995000475B7A635C2D35D9C6FAB7D07E0A43FDE2
-:1099600008388AFEC4B8CB409E029FD5317FA968D3
-:109970002F4966FC9B8EB31EC7E9E964E75027A711
-:10998000E5C3BED1FDD2F2FDD232BB733B9B1FEDCE
-:10999000D79A877CBD3FF8BB8FDEA4EF6785E6AD25
-:1099A000C68FFB387E2CAD67F1C4A0B507E2D1C8E5
-:1099B00068A6E79142E53AB62733BEBF2DD9CAF073
-:1099C000A2633F92241CA79EC3318DC23DF79BAF7B
-:1099D0007B1E9FCF3F7BDD61FBE584FCBEA3CD7783
-:1099E000ED085F8FC8CF16FD5C59A7FA6E10CB93B8
-:1099F000AAB6F5C0EF1E8D22467C4E76747C9795F4
-:109A0000C7F44BD03BC57D0CC433029D04959C6BC1
-:109A100074DCAFD0C8F3053BD637A190AFCFC2D727
-:109A2000673186DDABD0418FA7831953CC9DF1B749
-:109A300003EE1DFDF52DE0FD29E83A527F401F5D44
-:109A4000EDC74FFFD97828E6A98267079C55F31325
-:109A5000F0047AC6EFFA2AF151CC7343C73EAAE864
-:109A60003AEB5B8E57CCBEAB7A90E7FDDA95F85CAB
-:109A7000D594A58178B9F86E2CF8D81342FEB67D3E
-:109A8000C9DC6E4B23695DE4BBBD919C10D14F874F
-:109A9000CFD5765BBB95E539ABFD06ED090E3F9C56
-:109AA000C3F35C63E7CF87AAF40D88BFEC3585BEAE
-:109AB0000BC91365DD90C2F85B673F5010CFCB1622
-:109AC0001A4A5EB33B28BA242F43FE5D185BB22AC4
-:109AD0008BD63F4AAE447E5DD8BDE4CB2CCABFFFD7
-:109AE000985CC5EAF7947C990DF5AD55ECFD91CEE7
-:109AF000D780BF134FD584512921FDE15CB29DE988
-:109B00001FA51A027864905738404E0A7876551689
-:109B10001A34B511CFB576E0018B4F0CE2F2799093
-:109B2000B0CB035A855DDE1EC3CE13B7833CA5EBD5
-:109B30000D26BBAF00FC6BA25BE764D1AE1E8EFEB0
-:109B4000440FFA90E4A4FA06F839EC16320BF2E767
-:109B50005A37B9403F22CB1C462DC293FB9DE8DA11
-:109B60006ED17E0E1C7AE9A1EE6C1817CC6330A77B
-:109B7000FF9A437FFF0AE2A235574C0E50FF06B70B
-:109B80003CB30AF4ABC12DEFFC9DC95B762E43CCF0
-:109B90007B30F80FE9F341CD069CFFE096BB16C180
-:109BA000FB437FD7D203F063F8395F3DB083F68380
-:109BB000BFE9AE388F41BE90BECD798C0E787C4E19
-:109BC00095A75884872905E17113F3A2DA124E6D27
-:109BD00008A09EA63CF742F5728CAF5E27DD1C10F4
-:109BE0002710E7B4D5FECAB3E5747DF4F9F0209DE3
-:109BF0004198BE3CF206B5EBC3F4EC626255D44B1F
-:109C00008D298AF7CB2C598AF631C97729DAC7D939
-:109C1000F315F5F17D062BDE9FE82856D4EF1B34B3
-:109C20004EF17EB9B35C51CFF7352ADEEF7FA259F2
-:109C3000D97EDA8EFBD0FF9CAB14F47887DF5D0F02
-:109C4000E5C0D686D2583BE9E4A72D0C78EBE1F9C4
-:109C5000D09BB5453E12E1BCCA3237FAF73B9D575F
-:109C60002966E7D7DB34ECBC86F0CB0E36B98B61C6
-:109C70009FDE9628D829B047188371B05F65739F1F
-:109C8000C0FCA8EB41827EAC267DE0474341CECFAD
-:109C90009651EF6DE279354DD37331DFFDAC14D8B9
-:109CA00007F179CF6C761E6038D57071DD10D394D2
-:109CB000609FDC8A751793A5AA7D5AA1A897591EA3
-:109CC00054BC3F26799DA27D9CFD31D53E6D51D47B
-:109CD000273A9E51EDD376D53EBDA4681F7E215014
-:109CE0000F6434B2D5239BE9FC879C6D28857D19D0
-:109CF0007ACE331BE8A5D0E7AE07765874B4F608E1
-:109D0000943E6A4F817FEAADBA642C8FD6D9D1BF19
-:109D100074BCAE0F9627EA1CF8FCB77583B07CB70D
-:109D2000CE89E57FD68DC5D25FE7C2B2B1AE11DF75
-:109D3000DF5BD78C2585603AC88BF8B88E7B13D251
-:109D4000C18E6FD304AA2182FAFD670E225F6CEBED
-:109D5000166883FAC3A465C2285A9F0FC614E85731
-:109D600050D2FDF4A43AFF2B05F22952D8739197F3
-:109D7000D0A871E6837EFDF833C7366BD3097964CA
-:109D80009D2BD962657523ADE366431F9E639B9D42
-:109D90006984FC0A44C610AC4F807A7B146BDFF0F8
-:109DA000CCB1091E9C1F8B1F4F09C58F1F4F8910F7
-:109DB0003FFED525BB19FC28A76EF636C3BA4E71F7
-:109DC000BF9193E4EBE6D1B2589BAF03B97856A5A7
-:109DD0004788B24653FC24E069A3C63115F380EFEF
-:109DE000D511C83B9F2C317BB4430F4C65F2A87D45
-:109DF000A201ED9DD31AE722CC6F9282CF03BC5E05
-:109E000049F910E1D76E0E66001C7E997286D51353
-:109E100082CF4B8EB0BA8EADF38594D35DAD7337E0
-:109E2000CCA7D33A53D87D31C4E74C07F92BEAA726
-:109E3000CB9D5520274E173B7BC17C4EB90C483F2C
-:109E40001E97D90BF99544EB2C9A1AE64FE99DAA77
-:109E5000C3EFA6E8199D9107E488E7C4CB52999E09
-:109E600085FB06F6DC8C68D4C34F6B229FF39ECD36
-:109E7000E173B55B64FFCA1CDE5E72BF19FB6B5FEA
-:109E80001D85F1DB76576FD483DA6B2994287DB476
-:109E90005FAABDF63AB61B44680BE39433399FFAC8
-:109EA00055CBAABF9EA1EF7FB23ADA813CDC723774
-:109EB000CAA707F8CBB3E38CA8B7CC9E9C5E02720E
-:109EC00069268F77CD316B1331ECA5B5EAE10AA095
-:109ED00085A6FC0D20FE17C797EBADB45E91B66268
-:109EE0000394CB7A6ED1C391CFCABE7B3680FA5829
-:109EF0004549AB08EDA5C07B75745E73D7C876661F
-:109F00003F897386CBBF517E85C0C3D33C4F86C289
-:109F100017EDC2B9A992C22E999BCAF4866B295C2F
-:109F20006FCB25B9B794719C3F033DB4CE7E2FA76C
-:109F30000B7FBBB29DEB6D1FEAD9B8EA7B26C4B894
-:109F40006E3E8FD37AE294408F7BC08CF89137FDC0
-:109F5000CB878BE8FAF35A2C1A8CC30B3EEE67F7CB
-:109F60007D155D70239F1BD81A78F10C413C6F065C
-:109F70003AB9939CBADFB30EE5C3E0BF50F9037C56
-:109F8000F1A6FB9333D81A1FF1FCA5AFAE82F3C73D
-:109F90005AE46B47EBD660FD789D07CB13751B39F0
-:109FA0007F6CC0F677EBB672FEE8E5FC71373E6F6A
-:109FB000A99B8EE5A13A37964931AEC454A00BA3B4
-:109FC0001BF3318F3D632032C4195A0C88A79402C9
-:109FD0009E7F361EF25F0C163867A7CE8351F3DBE7
-:109FE0008EFD6FEA748F45766A5158DE0BE86799EB
-:109FF0005DE3CF296237033F19B22D6522F08F53FD
-:10A0000076BB19F4D6A1A9A9ACEEB49B75B43E6C8D
-:10A010001BAFBBED6603AD0F4FED3E11F4DE531EDB
-:10A02000BB398AD6476CEBCEDABD0483D4A5DBEC12
-:10A030001381FF1413E928D043A9316B14A4C896E7
-:10A04000598A8F021D8C499E370AE8606F8A1DF17C
-:10A05000619C7DDD51A88FEFB35D0B476B9CA6FC27
-:10A06000F5F05D497CB916BE1B95B6623D7C37BAEA
-:10A07000E7166DF87763FBEE590FF5098EED5AD0B0
-:10A0800007F7A6B0F8A7E847D445BBE0AF224FAB2F
-:10A090005F8B0BF9785EB30BF978873F624AF9233F
-:10A0A000E0A7AB69962C12CC638AD4117C875CB88C
-:10A0B000EA9B945A289F9DBCED1EF33A4A5F3550A7
-:10A0C0001F82F527D645E6BBD35223F0DDDF733A76
-:10A0D00005B909F9CFBFD7B37B387EC3D757D33281
-:10A0E000CF3C0FED19B719E4EBC11426270F73F914
-:10A0F000F8675E7EC59FD7689CF360FF2B5279DCC2
-:10A10000B6335D57C23C28DDAACE0574D1CEE9BA7C
-:10A110003A95CB077EDF411561E787EE94AFB53402
-:10A12000DC7ECB82BC9CC6E39027AACE7F10F98D43
-:10A13000EABC5FCA17F15E17D2ACCC1BEDB03FBAD8
-:10A1400031BE07C715C1E87834B54B7EF6F81DD689
-:10A15000FD78A4752F252C9F59BD0EE24E40DA12D2
-:10A16000F9CD9DD71388BC9E4EEB6850DCBF20FC18
-:10A17000EC540F7A16E65336D74CC07F13CE27CE59
-:10A18000DC864FA8F9CE3F8B9FDD86DF34C23CD5FD
-:10A19000FC469C6F5697429F837351906F07F7B4AC
-:10A1A000809FFEA144F701C0DBF692E0571AB0CFC2
-:10A1B000E20388676956F721782EE959DC5DE4B13E
-:10A1C0005ED2787E0D7AD16FB72D423ED406C28121
-:10A1D000D2E35BB40EFED36116D7519817E9C3F0F2
-:10A1E000A7ABFCCC77B81ED2B9647425F214DBB7E8
-:10A1F000FF3D03FD5877C0F7AEE050260F0B40FE41
-:10A20000FFF541D1A8F2B44AC42715409E7522EA51
-:10A2100011ADE97A2D94FF6C3BB1353D07FB57DB5F
-:10A220008BAD29838C6CDCD163A16CD6BBB7CE031C
-:10A230003B69B001EDA4F7797EDFA4F337E3415E1B
-:10A240004D927D897952673BB3F5E4AC127B5E6732
-:10A250007B93AE6F14ACEF4E76A7CBE8B70118D561
-:10A26000F667E59AAF08E4430F5D7393C07D6377AB
-:10A27000B647890C6CA2E0ACE3089445179C98861D
-:10A2800033E052ED112807FF8599E777CA271A7244
-:10A29000A3F1083B0EDE5779BFC2A07798BDCACBA9
-:10A2A0004EF7B02DF328F3D48A7D45983F210762FD
-:10A2B000A0BC2605D0EF256BD8BD0BE2BE056AC752
-:10A2C000A6764F00BB97E54B8D843C233AB9B21F6D
-:10A2D0007C34E721A4FB28D47F3AECD8D735981FEB
-:10A2E000D0A475C60E073B764D2FC73A5AFF933F51
-:10A2F000E16707685963F98A84DFCF56B9E6BAA2E5
-:10A30000DEBA2E74BF0FE44157FE8F8C72A7929075
-:10A310008DB05F95E42DFDCA3039481AFFDC01F796
-:10A320007E94CF9503E0D0AED24E72D2F7CAB9BDBB
-:10A33000413C8FB03AB7B308F97CA293F65B9EC05C
-:10A34000DF2733587BBA687F80D57B89FEF64FC400
-:10A350007A8AA8F3FEEE12F52DAC9E25BEDFCBEA7D
-:10A36000B962FCF7D97866F67E69F7EF4D02FD43D6
-:10A37000F0F771DD95F7F2507E3FB1FBEDF34994B4
-:10A38000ED5C1E887B78CA7E302EFA3DA0E7460938
-:10A3900073DF2AD7EAD0BF7DD5D698177E1E59E441
-:10A3A0009FB84ACD4ED0F7AAF6F5DE21F37C1CD03B
-:10A3B000377EC4E3CA65B209E311D737333EDF9570
-:10A3C000BEB678CD1B8AFDECD4CEEF49C6401D1D2C
-:10A3D000EFDA134998DF4E7AFA310EBEBCBB24E2A5
-:10A3E000ED789E55E47BC5F7204EB04FE37F13C553
-:10A3F000EEA1BCE047FEBBF837CCDF5BF5CC119497
-:10A4000073F3653BE2F1F12CF70A804F9B99DD373E
-:10A41000B878CD21A4D7B5995C4FB004FB86C3F3BF
-:10A42000C1CEF0FFE11DE0FFC37F27FCD57E667142
-:10A430001E7AD937CC4B6B33B338A883EFD3798DE1
-:10A440007D0087D7D340E7D716F973AC32240DFBD4
-:10A450001359BED1BB4560075DAF35E3FD44B3562C
-:10A460007D9C177E1E45946AFDFF73A0A38410BCDB
-:10A470007675E7FA5E08BE2FDD01BE2FFD3BE19B3E
-:10A48000A40DE81D10373DCBEE0B1BE03FAF0FCF07
-:10A490007339D99DC9DDD866162752E76B9DEC6EDE
-:10A4A0006678C5E3315593DF1D06F118410F23A3EC
-:10A4B0004923F8D7295E3B385E3B00AF05FE86E2B4
-:10A4C00032F4BB08F415C25FC2EC620E277F67BC92
-:10A4D0003D7D07B89EFE77C2B589EABF18C77C3DAF
-:10A4E0000AFD276A38FF8DD3BB80B731EDF6703691
-:10A4F000A6FD6BE06C4CB32BF2D204BCBB924FEACE
-:10A50000FD11F38E40A745DF864E1F4DE77C4A1BA9
-:10A51000C03C51F5BEC7A675DAF7B8B4DBEFBBB2E5
-:10A52000FD5FBCEF6AB8A9CB4A1EDF543FCF4FD3C3
-:10A53000FC4BE1F8FF9BFF7C76ED6145FBDC3527AA
-:10A5400015EDF33C1F28EAC302FE524073E10F1FD2
-:10A55000712988FAE5B7F5AB77E54F9FF4DA120D6C
-:10A56000C4DB06F9993FBF2DDDBD01F0EB7D8DB752
-:10A57000DE4CE13AF05C23BBA7AB2207F38756F130
-:10A58000397E39EC6F9F3C44F1E64B62407FA7EF88
-:10A59000F05D5A7B6E673C28BEA121CEB03CB46210
-:10A5A000A355EB447F0D7146C29BC7D318DE61FEF5
-:10A5B0000FA5F7E946A28BA7743E7DBA84F94ED366
-:10A5C00009CB87A6A5CF4DDB2769890FEE352E373E
-:10A5D000697D068CF329CF2F1BF8BDC7243E4E7131
-:10A5E0008E5976CA98973675108B0F3E606AC47381
-:10A5F000A4334E3C7CED21DA4ED67B8A58BEB5386A
-:10A600007FF607CD3789FB3D9E46989F5DE27164DA
-:10A610004987F761A9BF9BCBD73B495E2743BE4B18
-:10A62000F003827AB7A03BBABE13860276BE027EE2
-:10A6300077A29CE87CBDF17CF3965278BFF2B41D02
-:10A64000E15233685D1EEC63CD28E953435EC8AE2A
-:10A65000A959F317ECA74C7EA51EDEBF7E96B9C2A2
-:10A6600007B6523BC51EEEAF0CCC01BABC93FD231E
-:10A67000E67DAECE87F8F449DD092CDF1FF14E11DF
-:10A68000E819813A7F44BFE4B7F50F08BF80F013A3
-:10A69000083E20EEE17B3D8DF305A3D41DEF4FD3A3
-:10A6A000B252F0CB039DF9EB9B77E0AF6FFE3BF925
-:10A6B000EBD7C5F3CA642617D5F8ADC66B81CF704A
-:10A6C0005F37FCDEC00354DF03B93A9378722B295D
-:10A6D0009F9DBEA4413754FAF678BDCC74218344C3
-:10A6E0003867F2CDF9B91DF74D2E95D13E10F90915
-:10A6F000621FAEA775D233BF4A4BB8EDBE29DBFF50
-:10A70000ED7AFC8539DF4EAE11853E604DEFB4EE3B
-:10A7100084F4DBAF5BD9FE2F5E77D8F99739B22688
-:10A7200074DE03F287218FB1DDCBCE33566435E082
-:10A730003DF164503006F4C6A50765C443A2756AAE
-:10A7400053C2EE976A25BE0F011F970C5B82E7E0AC
-:10A750003ADD0B656AC27371EAFBA144BE7035EF46
-:10A76000477D4F5435CF13AE56E5ED0C49E7E7086A
-:10A770000B4801CBAF50EAA5EAB2AD8E28FC926D32
-:10A7800037EBD00F5092BEF7479EB4D03E8CEDBC55
-:10A790006F13EEB06F13FE9DFBA6C657D9BC13CF47
-:10A7A000437D537C2576E73C98B7E0C3B320878B85
-:10A7B0008E3BEB80C10BF7F98B7BADDB2576FF4C35
-:10A7C000FBA704FD4677BA1779F069379EE71CF8B6
-:10A7D000AE536679042CDF40E829426F19DA1A94E7
-:10A7E000D9FDF5FC1C14CF0BFABAFCCBE1B7A09E47
-:10A7F00023FC6FFF2CBFB590737B8C8C3E847FB0A5
-:10A8000030E0423DAE4DE72B827BE83DFBA322EAE0
-:10A81000013F4967FBD4D5BDAD4931EE9FA4433B11
-:10A82000E7EFE2FED63299DDD37CDD2FA3FF6EF594
-:10A830000F7FF7EB67ED77B6EB6B2CD723DA45A2EA
-:10A84000ACD1B0731205A576CCDB037B09FC77C2D3
-:10A850009FA77EFF5066C9CE74F42F0DC3FB34AFA3
-:10A860006F65F3E96A5F6AD60471FC2EDBF9F8358F
-:10A87000078B2CE1F7607C9E2E097CB65C3486F653
-:10A88000F5EBEEFFF0E074857EF3FFBADD3049A60C
-:10A89000AA23958FB99297E9A784E9A9B3881FCB1A
-:10A8A000392488A59BB07CFAF9C481E542E2C2D282
-:10A8B00095E9FE281DF35B8289980FB9EF1F7D0192
-:10A8C0006FAE8D18DA00B973FF2A3DAD3DDF8EE320
-:10A8D000B7BFFE8F0CC86BB913FDF78B71B6A647D7
-:10A8E0008827FF67B18CF11392BC12E9A19CDF921B
-:10A8F0004046B1B8D88F12B3D83DF51DFC2F69BBC7
-:10A90000E07F106FCDFD54C3F243964A787F6B739E
-:10A910004083A495BB28CB0BF7F13437B1F6DC2A82
-:10A92000AB57A2F5DCC151AC7D85D50BE71E669314
-:10A9300000D2E35C38F520C33918C6DFC43DE554C6
-:10A9400063CF063D6B518B91E5EF93404FE0E37988
-:10A950005DD8376333985DDC2F9BF1ED7E254A3F50
-:10A96000444C06E3035599254B3368B92AC3190BA8
-:10A97000653F9B7FD34F0BD12F8FBFA3F2C5E0075D
-:10A98000317E28BE7B32B3241EDE7B5562F9E69E03
-:10A9900083FCF706483031FCFE505766696A061D95
-:10A9A0003F2B83303AEA02AEF07B73AE08F69CC8C8
-:10A9B00067EC073615FAC7D93D54AF4AAC5EF0BC18
-:10A9C000EDBEF57DD187EF01BDF6C94CF73D387F6F
-:10A9D0003D212698FFCF0DDE1DA87FD666803F72F1
-:10A9E000C9F3060DE8051F51B10AE74AFE5867C4CE
-:10A9F000F2636AE742F9276AE742F929B573A1FCD5
-:10AA00008CDAB9502EBAE12084F28FF7329CA3324F
-:10AA10008A42F136F57C877378768C7F508FE357C6
-:10AA200065BA11BE1DFBBD9F78211EF2AA35986A3A
-:10AA3000BB0DBE75CD673CDCDE8B9C9FD59FEF7B4D
-:10AA40005E9316E5785E73206671D87B9333F4D8F5
-:10AA50009EFBFA053C1FDA66E980AF53A24B9EA429
-:10AA600061F5C9CFF741F856653A97C23E52FAFEF2
-:10AA70000E9479CDBFFB099CE7A1FD631E41BB1479
-:10AA80007C0AF57CD53AD47010EB7AD5EADF04DF86
-:10AA9000BFFA7A36AC84F21BC2E806F0488AB4DE0C
-:10AAA0007508D7FB0CC14238A772DF2D3962DE7002
-:10AAB000556631C25927F04DC089EFD7B7A5EB8E47
-:10AAC0007836C75322EED700DE690739743306F4AF
-:10AAD000BA721EAF6F6EEAF93EACCF734226BDEC80
-:10AAE00088BF0ABA7B8EEF8F28730FEA5DB04FAF35
-:10AAF0001EBCD813EE5BA5FBD213EE5FDD9CD14BE1
-:10AB000091DF943BF8EFDB7E1A8FEFE3EF7CCE20F2
-:10AB1000DBCB209F64A6F1F03158D26CCBA76590B7
-:10AB20004F3237593A0EE53C7BD668C82311F9EE0F
-:10AB30000BFA141F07529AE028477DAC18984B98DF
-:10AB40003C283546F3CB9F85FC8953D4C7247757DF
-:10AB5000BC3FCEDE43D13EBECF3D8A7631EE0447C8
-:10AB60007FC57BFD6CC16CB0BFE83AD87DD7BB64B4
-:10AB7000CCBBCB7DFDF4BDF7D0FAA417A7E2FD7ED8
-:10AB8000AFF2F6497B4BF1F703DB293CF55491BA60
-:10AB900034E8B1A77E0A9DA9F4FBCA832F1C77DA9B
-:10ABA0006FA3DFDF41AF17FC75798BB108F8EBD7E6
-:10ABB000D5F3D5FBB23F839F0BE47A7F57F8D241A0
-:10ABC0000F929DE10BBF674B8D2F9059CAF08F9567
-:10ABD000934EB17360DF948F7D0E7C2CEC1C664726
-:10ABE000A9F2B7F5D33BDE5F05FEF7F76482E7EA2B
-:10ABF000F8F9BCC5F0FF7208CFC9C2ED8FC07D5215
-:10AC0000F4B907F44F3807EAA4FDFF3983EB4D95FB
-:10AC1000871F49290CB593D59F2ADE276BA50D8A7E
-:10AC2000FAFA2C657D73F186F0EFBBE2878BB7CE25
-:10AC3000D3BBF1FCA614F1F75AC57CCADE8AC2FC6C
-:10AC4000BC899077421F55177EA085F8EAC42EE490
-:10AC5000A7E03B3364521BA9FD6606F3DF4F782B58
-:10AC60000AF359BE69BF1F515862BEE06F98FCFCE1
-:10AC700028D6AF0DDF774326EBFF5AD1961F7E050E
-:10AC800071CFFD04F337AF5919DFCF6BFA42A3A19F
-:10AC900065BF6E0C5FF22C010DC893F68A680FE455
-:10ACA000E7D72C35635E67BFECE087C67C42623332
-:10ACB00037FFD848F7ED0F7098314C9EB6838D431F
-:10ACC000EBC9FFF138F2FBF16F45F934DF623DC9A2
-:10ACD000548742795DC2E87B0EE00D972BE03BAFD5
-:10ACE000798474C819E007B07EA84FCAFCF1FB4F05
-:10ACF000D2716B4E32FA864C39B5DD3E33CC6E27BD
-:10AD0000CF31BA34D27FA0CF2D3BDAA0077BEECE75
-:10AD1000F4DD8879335F97AE0B3295F67B043A3ECB
-:10AD2000359EEE4BCD7E76BFC4F5965E78AEB52BE4
-:10AD3000F95DB35583F427EA6D2DF258C057F5F944
-:10AD400070014F62C951DCE3B472F8DF26839C5C6A
-:10AD50007950CB923DBA1A67A386D8C3C679F590CD
-:10AD6000A182FD0E259B7FBB90CF07FF6A2BEECB08
-:10AD7000CA7511E41C95CBBA7890CBE5ECF715CEEB
-:10AD80001C4C2A01F89F9188CF8EE7AE589EF1FDAA
-:10AD9000AC3B786EC2FB4392FB68C3EF371476E49A
-:10ADA000D483537B811EF961D3FC337467C8A2CC72
-:10ADB0001E38DE34E241BDF78CD5950EFE86493C47
-:10ADC000DE7FC61A6C057E7C6678B404F17BDAFF00
-:10ADD0007A12765FDF199D2B9DDD0321F28AEFFE4B
-:10ADE00056F7B695C96B8BC743BC7A16B1801D79EF
-:10ADF0009FCCF45AF226A34BC1EF6A24BF0DE6E9BB
-:10AE0000CA9CFCFD4CFA5DD29A1FA15DD901372D79
-:10AE1000FF9DA6AFA9D776D8AFBB25763F8983E93A
-:10AE2000FBD5C3AEFE6C1A9C73A376B644E733BF62
-:10AE3000F930DEC3A3B6AB3BEC9BFFA57FB4B37D7B
-:10AE4000E4DA925914F27BABEDA40EBD5CE877BB5B
-:10AE5000589EFB91E14FB72DA7F5D5BBA2118E9758
-:10AE60009F3778807F5FDE61407BE7B22D786E157B
-:10AE7000D4F7E63A3C385A0E9EEF12F8BD4463FF11
-:10AE80003DC81DF25B1DDEB7F1C5CF0DF87B1E4B33
-:10AE90005FB86B07D84F5FA4DB5F7E05FC7B2F2775
-:10AEA000E07D0024997D3F91D323D0979DEE87FCD0
-:10AEB0000B33EA0D4B5F4B41FE25F6EFD2CFA3F0EB
-:10AEC0001CFCE513F7C7821FAC55B387FD8EA46C3D
-:10AED000F2001F5EBE230AF53EA277BF06EB2FFDF0
-:10AEE000C5C469FD61FCDF2510584F7BCB6BE87F43
-:10AEF0000CED6F64B97EBDA507E3031D7296E5CD29
-:10AF0000CE0DDDCBBC1FF0A78A887B1059DE6C818B
-:10AF10002CB1DF957C22F239F0DF66F238A9F09788
-:10AF2000C4116332D0A19BB07B1F9FE88DF7EA9ECE
-:10AF3000CFE4E79749909F7714F876AEFA00FA4B82
-:10AF40000C2C5FAF8B7B2D3FCC64E782171BFFA2DD
-:10AF5000F09B54AFB9A1ACF765BFB35C506FEFBFC6
-:10AF60008296AB389CFF91E4FA08D6B7AC71CBBEA1
-:10AF700077112ECF7DEF0F30EE0913FA69C8BB0CA5
-:10AF80007E6AFB65B131C8E30EDB1571F58BCFFC32
-:10AF90001EF3472EBE7E0FFEBED87CD97F11EEC7B2
-:10AFA0006A33FB3F7988967B4F9CC27D51CFB75364
-:10AFB0001C5E627CA512D6D11FF2575CED9948B792
-:10AFC0008CDECF6FCA45F8093F6DFBE5C8F6959852
-:10AFD000A7E85FCC4FF42FDEFBEF4CA6DF5FD3FB7F
-:10AFE000F3402EEF843844983E7F2DC69F073F756F
-:10AFF000BB339DE5735FB3D17A18DEFC5F8A9C0C8E
-:10B00000C3008000000000001F8B0800000000004B
-:10B01000000BAD580D6C14D7119EB77BB777C67770
-:10B02000F6818D7FE21FF6CEC4187CF816FFD5B1ED
-:10B030004D39FC832842CDF193D44A216C9A4028A3
-:10B04000C4F864438B92AAAC7B95F911515C358AA4
-:10B05000A04DAB83081455541817228A30BD04152F
-:10B06000701BD1438914925A68EB36D46D0CE7D229
-:10B07000A42D6A2477E6ED1E77EB9FB4897A966F4C
-:10B080003CEFCD9B37F3CDBC99F7DC01F8A906E87E
-:10B0900070823D37176907532238D401A0C13C4E56
-:10B0A000632ACE3F5770016C35240C21671EC063A4
-:10B0B000607E72736C500FB091FE9671BCE1B7F771
-:10B0C0005916C01330608732809B42EF1E49041826
-:10B0D0001FF8A15D7591509BE7760500D33E1026C1
-:10B0E0002B0126E9B3623A05B001C9D16752A46FBA
-:10B0F0000D603E7EB7404518F5DCF1B834210050B4
-:10B100002A331B972B811292C37925568B74D0A1B9
-:10B1100044D09E3D42C827E3BAE7A4581588A975D4
-:10B120007B04958F8FB3B7B7818FB68B5585DC00C5
-:10B1300089B912B06CA4F3957810F1D03E01E50402
-:10B14000EA49D8A16310F7AD6D15C283DC0FDBA807
-:10B150008EFB0AC0B87DB59538EE07584EE34ED346
-:10B160006E2F8E07ACF2297FACFC0559E0FED5E6C8
-:10B1700008E101FF743C36D07C1D40046222E18A64
-:10B180009F8D4EC4BDC9C41D202802C66597C9EF56
-:10B1900072BA626215DA9DE5D444F4A7E922C605C5
-:10B1A000F9265BEC4DA22C08B017E30BE7EDE30F9B
-:10B1B000EC201C0A2A6DA4A7D10C2F435D9B50AE36
-:10B1C0008F8581F675423FA787589CDBF16598E033
-:10B1D00034081E1B51849FD3360871BA0AC29CAE34
-:10B1E000867E4ED7C000A76B21CE292C8945C04B47
-:10B1F0003B7DC7733B13C9579E152691D67E0DC262
-:10B2000003AEE938EC31719A1D078D513E7E5E1C0C
-:10B2100056815AC0F54DC5A3B882E7F7543C1C943B
-:10B220008F18B70C8816105D0EBA487405252EEAE3
-:10B230005909B28DF8560872BEFD7FC4A141576D01
-:10B24000AA7F063C5A67CE8BEF9A7921128675A9A0
-:10B25000389D9165CE27E305686768E9F43826C70D
-:10B260006B335BFE2E7B008E46DB42B642E46B5AAC
-:10B270007ACA90FF99BCD1E09B5A7EE143FE54F418
-:10B2800031830FB4D4D81580DEDEC7436D8F00A89C
-:10B2900019595510A0C2512E50FEECF618F8ABBD4E
-:10B2A0007B140F9E23B5C4A5907F4E076286F88954
-:10B2B000652234206D93D49765B4B37475BCCF40C8
-:10B2C000B825BF03CFEF78DC0E8770FD7EC990777D
-:10B2D000E03A6775CA2F1CD732901F1CACEC61BED8
-:10B2E000D9F747FDC748BFDAFBB00664C739A67C6B
-:10B2F000D63E3FCE574F923C38CB81E25EE434F4E9
-:10B300008C0F5656525CCE1048349FEBAD21DCFEBC
-:10B31000921F3A43F209B7915F672807E7CF4EDFE4
-:10B320009783A7497EEA78E2433400D7BF25ABE78D
-:10B3300068BE2BF3D372AA4B7797BDD3A77B537903
-:10B34000CA70FF4DE87724085189D79166CF6DAC5C
-:10B35000A3803199C47826B6A21EC4A136A446ECB7
-:10B3600038FCA54D13F558A4486F8CEA5D97A49757
-:10B370002EC3752F6FB8251979566CE499598786B5
-:10B380002E0DBF5064B021483B575D97EEFFE3F7A9
-:10B39000885FD73D9742E2A9F374B407B248C86505
-:10B3A000A91BC973D678DE1113B3885FBC95E496E8
-:10B3B000BF3352467EAD18D1236ED233F45E916115
-:10B3C00087D91782FF645FA42FB48B549C01BACF36
-:10B3D000895107E2D5CDC297DDC4FF9C291ADAFF57
-:10B3E0006727E64736C9075D85E8D776D3AFCEE154
-:10B3F000137D6EA4DB5F7D7A2D54D171B0F3FA2DED
-:10B40000E30F9DFF9DAFDB53F59C7F6320D0CF2ED4
-:10B41000487E6212E541E78055AE0B0EFF8DEA4E85
-:10B42000577A9D47BB2664772EC7DBEC57402D0427
-:10B43000F53D6BAE253F5C64F790147530A43FE991
-:10B44000513CC49BE7072E7E0FD2E5E1D51C1EFBC5
-:10B45000E479FAE601B43D278557E0A42348B8070C
-:10B460004EE607C9BF80045B421CEF28CFE300E62D
-:10B4700006C37C3A3D77C227E03EA7872A14ACA0DA
-:10B4800070615F10FEB830655FB7799EDAC553AD65
-:10B4900012E6C1BD67C0834712BA875F8B3891EF50
-:10B4A0003E082401F7E80BF5DC1B13A2A4A771B832
-:10B4B000A680E27DD63C9F8E0201E4349C32E439C2
-:10B4C0002057A4F824BE0E333E9915F32CF36EE5F5
-:10B4D00021CBFAEC069F75BD168CFBEBA91E1BEB6E
-:10B4E000E7069758E4F767ADBA4679B93CBE6D2DCB
-:10B4F000E192B3BADA325F0F4E7E7FA82B762951E4
-:10B500005C0F1F1BFDBC017F783F80B048FE35E912
-:10B51000003FC278348EDB2C71CFD0311F512EE327
-:10B52000DDB4B8E3AF43B6F2CBBC661E1443717A08
-:10B530001EA470763DC091E7C1300A11CE6E298AF3
-:10B54000578E6938D5C3C26C9AAFBB264294E3DEEE
-:10B55000A3C4707C7EC88A777E8715EF42D58A6F38
-:10B56000D1762BBE25612BBE0BF65AF1F46A56FC40
-:10B57000CA0E345AE41FEE6FB1F08B8EACB1C82FF7
-:10B580008EAEB7F095AF3F61915F3AF00DCB7CE0A6
-:10B59000FC0ECB7C32AFA6C67D59ACDB223735EE34
-:10B5A00035D79EB7E84DC659C39FFF679C774D8935
-:10B5B000F3F3681B9DBBEB596387E9187E35D3A86D
-:10B5C0004BED62733C48F16EB62B14D3DFC939AD35
-:10B5D0006E3AEF661F0A997D08D43E1EF7909927B0
-:10B5E0004A5CB94C75B4FA66A8350BF95A3D7C999A
-:10B5F000CA71FD587F6BB6CCD344F6A03C33717949
-:10B60000B48181CD725E90CF4BE1B641EB15B35161
-:10B61000B8E9D36884974B4A2ADC7FBD39CF1A8CAE
-:10B62000BABE2E9801B6343C969BE3007E6E5FB3A3
-:10B6300031051BCCF700DECB41A27BB9E08C46BCC8
-:10B6400033DD27952322BF27A9FCDE7495A976A2B6
-:10B650001B9DF152EA5FC7F2D4235EACF377054538
-:10B66000E6F72CA647C8A90439C69BCE8D50D04F0B
-:10B67000F777FCF321ACBBC2F590E6E7E67B74B448
-:10B680005F35ED39E1558F919E51E6E9ABC1B5D7F4
-:10B690001B3F2AA5FEE3101109AC8381ACE06B349B
-:10B6A000AFED6F9ECBFB6A3EFA87755417647E7FC1
-:10B6B000D09E67FC3DF011297B24ED9C1EB0F3BEAB
-:10B6C00003E6FB68B38957F27DB4C9DC7F14556C7F
-:10B6D000C73ABDF9FC558ECBCE8271B0E5F07CE364
-:10B6E000F7A4A78B5DD587C8A7608DB27E298D276B
-:10B6F000DF4B45E2E7E98BEDA23F5B9FE1BE98A4FB
-:10B700003B0BC6F87BEEC1FA53461F995DBFC6FBE3
-:10B710006CCA6F43FFE8C14CDE5F460F96B4104D14
-:10B72000E9BFCBF56F0EDFB0E4C996BDEF5BF2EF7A
-:10B7300029ED0F96793D77C25E84FEEB6F14AEFA69
-:10B740003AE277E79CA39EDE8D18B79BDEBA947E23
-:10B75000FDC5456DB4DF7FF7F3AF1CDF917D71B0A0
-:10B760002D4CF9796BDF4DCEEBFB744EA7FA997C2B
-:10B770006726A9F41654D8303E136C8E72DC3B7DDC
-:10B780009F2D3EE35D32B232AF85FAEC48896433D7
-:10B7900068B9C11736380D7ED56AA209BBEB00BD6A
-:10B7A0003347180419E6C32616FAE953E8F70B796C
-:10B7B000EA27947F5D3B26AA6C781EBA02FA930CA6
-:10B7C000E3593C57FD17F9CFF07A57388FDB594EC4
-:10B7D000F78E3141AB62580BAA7D85EB6C1897B19F
-:10B7E00039DA5DEAC44B8EE71ABC649C8F46DF24CD
-:10B7F0003F0FCD1E55F0A19E0F9918E3F9FC4B1693
-:10B800003DC1F34D97D6BBF979EAA07717BD77E92B
-:10B81000BD91C83068868F71FFE64CA10B7D463D17
-:10B820006B3469BB78B89CD1FDE08803E83CE03E0E
-:10B830004181F61972444F209F87B6D33DE5D792D8
-:10B84000719FAFFE95234675639BF3631EA7129FFE
-:10B8500097EBC92DC3CA85EB725F724423649F1EA8
-:10B860002F5D87F6F5DBF1FE42EFE977711ECFDD44
-:10B870009D17171D3F94168F12330EF00C80319FC9
-:10B880007F8CE63B87476F511DB9E255BDE4FFA8A9
-:10B8900020D7531DE9CC7A53A2FA53E393F93AB473
-:10B8A00097FB8FF5E0FB8CE3ECF4FC09F3750B16CA
-:10B8B0009B6C7ABF09EA625ADFE9D425D28719C1A5
-:10B8C000EF7FB3F97F676BFC153FD2BB6EA594F693
-:10B8D00049EE8B76D4909EA4DF493B527A3E3BAF33
-:10B8E000B739272CE7F7F6D1FDE5744E105F95ECDC
-:10B8F000AF16D996F533AC7FDC8CDBBFF3432B7DE1
-:10B900004877847FF0C6DB726A3EC1FABFF501C595
-:10B910006BD8C5EBDC6CEBA7FAD9796998E3817E2B
-:10B920003E49FEA5F9F928ED93F4F3CED07BAFF8AC
-:10B93000E52FEE5FA2242E91DEC4B1FBA532AEEF5F
-:10B94000BC78F526E54FA7F9CE87B3D6F7BB630ED3
-:10B95000BE13E7A5D573AA710BF8344BBF3F3992DC
-:10B96000EB8B6DD6F578511670BFB3E6FBE13C9DCD
-:10B97000DB19DE9967E3026F95670BF07E467D0069
-:10B98000FB2ED5FD64DFDD7D43E0F9B8DB0B7C9E4B
-:10B99000ECA2FC67FA15DE0792FF478830EC6F983F
-:10B9A00007DD92FA6DCA0F507B785F1017B814CA82
-:10B9B000E3C1DFAC31DF4B469FA933FB4A1DE921D0
-:10B9C000FBFDD9BCDFD49AFBD63BF11EE3A392ADBD
-:10B9D00099FF2F31FFAF70F00A7F67FD0774153EA6
-:10B9E000C90014000000000000000000000000007A
-:10B9F0001F8B080000000000000BFB51CFC0F003BC
-:10BA00008AB7C9333098293130242A33309C01E277
-:10BA10002479841CADB02A0765FA5F303230BC024D
-:10BA2000E23740FC8E9174FD3F8510EC87BC0C0C16
-:10BA3000BF80FC8D405A4C8081E12690FD1B88BF61
-:10BA400003F9E27C0C0CCA406C06E4BB00E93C2024
-:10BA5000F607E23F407E1B1F6EF3FF0AE1B7FFAA25
-:10BA6000002A9F571095FF911FBFFE0E41FCF2BCAC
-:10BA700004ECC7864FA8911F1F3CEAB44F33D4C4CF
-:10BA8000371950F9A7651818EECA323028C843F89C
-:10BA9000D790E48D8062676420ECAD620C0C7BE58E
-:10BAA00018182E336037771B507E1F50DE0E6A0E3B
-:10BAB00000B5BC7B1E680300000000000000000011
-:10BAC0001F8B080000000000000BE57D0B7854D5AB
-:10BAD000B5F03E73CE9957662693848484F09824FB
-:10BAE000803C020E010248A893071425C008A868EC
-:10BAF000110651088F3C44ED976BDBCBF04AD1D255
-:10BB000036D6B6D25ED401E15EA45803448D1A60E5
-:10BB1000806051C106EB03ABD600B6080219A0EA5B
-:10BB200048F1F75F6BED7D92732633407BFBDFBFFF
-:10BB3000DFFF8FB5DB7DCEDEFBECBDDE6BEDB577D9
-:10BB40005496CE581FC6BEC1DF8D8C3D2031868FE6
-:10BB5000B4127EFFEB9B0CC6A65AE1BF64C6C6CBEF
-:10BB60000EC6463036C5C142166833A5081E766338
-:10BB7000ECCD4D5248C63ED02E58C8D822C67F5371
-:10BB800015D6245DCFD885D13BEB867918937C3EC2
-:10BB9000565B00A5C7CD666159B4F72BC9C558F2ED
-:10BBA00068136303789F6FE0DF149F9DC6D2EA6934
-:10BBB00013530DF5747F0F43FBEE33730DEFB30298
-:10BBC000830CEFB32B0A0CF55E353718DAF7A92D85
-:10BBD00031D47382371BDAE7AD9966A8F7ABBFD3D0
-:10BBE000D0FEBA75771BDE0F0C2D32BC1FBC65A9C9
-:10BBF000A13EA4E12143FBEB9B5618DE0F0B3F62F5
-:10BC0000783FFCE0CF0CF591ADBF36B41F7574A33F
-:10BC1000E1FD98B6AD86F7633FDD61A88F8BBC6C04
-:10BC2000687F63749FA15ECCDE30B42FB5FEC15037
-:10BC30001FEFFEC0D0FEDB99270CEF6FF27C667819
-:10BC4000AFD1C1A401170DCF277BFF66E8A7303F16
-:10BC5000009B3133ABA1D2CAEAA9B4B3062A1DAC0A
-:10BC600095CAEFF60EDC49F4F964B08E01DDAD0C37
-:10BC700046FE9406E59BA3F39203F9389A8F31A010
-:10BC8000DB297C6836C5EA08CB4067162B0BDA80C7
-:10BC9000145C51A0B734A0BB28A3D21D057A1B0E9B
-:10BCA0007417B552991A4DA5E769513795DDA23D34
-:10BCB000E8797A3493CA8C682E95DDA31E2A33A3C3
-:10BCC00083A8CC8A0EA0B247B480FA6547BD54F66B
-:10BCD0008CDE40CF7B454753D93B5A42CFFB447D56
-:10BCE000547AA2375399139D48656E741AB5CB8B5D
-:10BCF000FAA9EC1BBD939EF78BCEA4B27FF46E2AFB
-:10BD0000AF8B06A81C105D44E5C068059583A24B67
-:10BD1000A9DFE0680D95F9D187E8F990682D954382
-:10BD2000A32BA8BC3E1AA4D21B7D84DA0D8BAEA136
-:10BD3000B220FA337A3E3C5A4FE588E8AFE9F9C8B9
-:10BD4000E83A2A0BA31BA91C150D51393ABA95CA1A
-:10BD500031D12D54DE10DD41FDC6461BA82C8ABE14
-:10BD60004CCFC7459BA8FC16D25B1AD25D984A5FA0
-:10BD7000F4757A5E1C3D486549F42D7A5E1A6DA50E
-:10BD8000B22CFA477A3E3E7A94CA09D1E3547E3BFC
-:10BD9000DA46E5C4E8692A6F8A7E4AE5CDD10BD43C
-:10BDA0006F5234426579F4123D9F1C8D52A9C93BF4
-:10BDB000365A3DD3A6D15F2EFEFF2CF75F06835C7B
-:10BDC0006201D337503207D0C198CEF6B125483B37
-:10BDD00092932AD05512D0770AC8429487536AA406
-:10BDE000D0B773803EBAB5B5605D1D6DF158A07EC9
-:10BDF000178BA848BF1FB13627CAD3BD634EF66C58
-:10BE0000037A7D333DDC0B881B7F246F559C531ECA
-:10BE1000CADB334A1B3C9FD26D5F7AC081FD8137FC
-:10BE20000A90BCE1FB48DF408E38CE5D0A0BBA6059
-:10BE3000AA47708431D42E6C81FAAC72E62B80F65E
-:10BE400075632C3343F09DBA027F851FCA1FE7F844
-:10BE50006762F93A320FCC7FBF288F3013953FEEDF
-:10BE6000EDA672D67DFD383F950110B3AE0E87F476
-:10BE70000CDE8F3922BDFD43AEBD9FC2A0DFC8CE10
-:10BE8000F6CF30FF3BF83C58C206D4383ADBC1F35A
-:10BE9000A3D82ECEF30FE23D6F308120007D154CEC
-:10BEA000358736A37E629EE45B705E564FF2346740
-:10BEB000E2793DBC2C335FE9AB9F6788E6F7B0C4FD
-:10BEC0006636D0F8BECC6943687CC27730D51ADAC2
-:10BED0009C43A830D0CB5F119ED02FDFEE6FA7F52B
-:10BEE000413FBF13E1E3BE26B840BF2F089E0AF4CE
-:10BEF0001B72EDFD1297F54CCCC343E389E7D516D1
-:10BF00001694004E91CDCED0C61C5C9387E4678515
-:10BF10005B08D06E000CD0EB15290842C65A762774
-:10BF2000854DD0BE68B37323DA01ED25C18CA90815
-:10BF3000878D2ADB0C4D56ECFED1BBFF01F5A20D1F
-:10BF40002AB3407DE1C59F1732A0A3EB24897F3F30
-:10BF5000E8DBDB17C60F30EDE79370FC058C8FDF55
-:10BF60002E09B86E4E26BC7D5AB6A96E2C946DBBB8
-:10BF70002ACB19C8F19300D62CA0EF8576A660399C
-:10BF8000AB66BB99E834A87ED2A6E917E267A5B3F1
-:10BF90002E77AD2FC0BAC6FFB0EE8521B5B30EFF28
-:10BFA0002EDE62ACEBE0457650E4BC12DA487495C4
-:10BFB000CDE1A3C1CB97CDE127E055765E099ABAD2
-:10BFC00011BC42280792250FC1A1E2BC1296619CC8
-:10BFD0000A8023B260C5AE8733104E8BB7D8DC9F82
-:10BFE000E8BE5BD99062A8573765B93FD1E9D10B5C
-:10BFF000079F76E1FA97669ADC9F807C3BB3CC97EB
-:10C00000F609A0ECDCB289546AF451D990E37618B1
-:10C01000C631D62FD44B131B487F7A92670C494CFC
-:10C02000674B33CDEE4F80554F6FE1FAF6F432ABEC
-:10C030001BBF736699DBCDBF9B49A506AF25B576BF
-:10C040006AAFCD2FD1B8FFECF931D6C84E58519E0A
-:10C05000C3BBBCC4ED13F293F25733F149B3FA05F5
-:10C06000D28D15FEFDC6447444756DDCEA06396850
-:10C07000B91E9F6F337C0FFA79FEA2D32F89F95630
-:10C08000617FD1D1E5FD3800F1A995F01C801193B5
-:10C0900061BC76C5B106EDA8C9827EAAB11DC88370
-:10C0A0004A6B9B39008FCE36727C24FACEE9655BF1
-:10C0B000B251AE5558EBCD28AC2A1A0696213F9DB9
-:10C0C0006D5C9981FA65B17CE1BBFE38FD7FACF116
-:10C0D0006D488D18F56548CC13C635F0197374ACEE
-:10C0E0001BEA674CF02947D7711F97B8DEA9DA76AB
-:10C0F00064C258987F55D37933CE63B214785C4AC2
-:10C10000EF5CBF84EB8771166D39467CFEA91AEC93
-:10C11000FFBD9C2BC0B3CB3C1D997F49D2CD2F08CE
-:10C120008624F0EBDDA305BF32CFED1F007F9E7AA2
-:10C1300043658FC03CD8656805EF7B8BB7F730BF90
-:10C140000BE17577E362923FA750FEA01E66F5856E
-:10C15000481F67996922AEEF2C7BCB355C07BF7D0A
-:10C160009259C0074C59900716FA14C12D0BF5804F
-:10C17000A5A2AE551E8ACF95A0904BD237244F4230
-:10C1800012E9890AFE3CC8ACCB691D6BB83C0AC2F7
-:10C190003F58BFB7DE289F16AC33D6E7B369190AFC
-:10C1A000C897F93F576144906F7AF907F07B46E2F0
-:10C1B0007A7701ABA973C3FC9F30039E60FE77BB07
-:10C1C00099920DEBAB7CF189C2B9507F4DE27AECCC
-:10C1D000F432987E7F182795AF7F516DC8ECCBEF76
-:10C1E000BABE138DC36F1BCB683C9293C1459AFEB8
-:10C1F000651EA590A42518B989D79FDD28FB6C2E54
-:10C200006C07CF75F279DE1AE3FAAEB6FED8F532D6
-:10C21000F633A2B7455B6E614867DA7A347C69EB26
-:10C2200051B748BE501C3E6813F4AAC9B588809F18
-:10C2300066777C1E53BF1453FF26A6AED1B72AF8EB
-:10C240001BE8FE736924F2736402A79336AED744E9
-:10C250003B7367BB4B576A6711FC02EDBEB9523B9B
-:10C260005BE7788A29BD6BBBCA179F7D2108F4BDA7
-:10C27000E8B95FB818D0E329A53EC30BCF976C5E31
-:10C28000ED42387DAA045D4837A742F2C478F01A1F
-:10C290006392347BC32101DEAB34FA2F5A3E05F59D
-:10C2A000FB179B55F7238097EA2D96B005F05DD5D7
-:10C2B000B8B09C0DA5FA315EFFE179A48FEA26F5AE
-:10C2C000B81EAF8BFEEB17191E27E121DB84363039
-:10C2D0000B673328AB36FD7902DAD1D52C42F41C3A
-:10C2E000DB0FBF8FAE1DC8EBB9E6E4AEEF35BFB1D3
-:10C2F0009A3F62D58D3F3A8F7E6335538EEBE9A826
-:10C30000026919ECBC41266737F417D828360AE5CC
-:10C310008A0607164A27B9BCF299C7871E83799CFB
-:10C32000D9F4864BD2C1072C2482CB8586791FA7EE
-:10C330005D412F9C03FA64FDF5FD42D4CFD3041375
-:10C34000E80ED5665E2E51C3AEB100CF251B542F2B
-:10C3500050265BF2ECD3FFF96BE03BF6BEC5DB0F7A
-:10C36000E0BDF8D903EFDE00F5C5DBD56EE57C193D
-:10C370000E29A3131FD5F02FC66534F82FDA79C024
-:10C38000EC19C29F7F3FB5130F8BB7EF35B3215D1B
-:10C39000E156DAB0D7DCE688838F866313D09E59E6
-:10C3A000F9CC9766C4F7A9DD12EB9ED3B57FC5869D
-:10C3B0000364BF209C087F023F1DF8EA82A7F09427
-:10C3C0009747503B37CAEB447872A2AE1E4974FCC3
-:10C3D000DB97E1FB157FB47871FD15BFBDDF85EB01
-:10C3E00038A9D4707A7E6275860FBE5BA10633DCF5
-:10C3F00054F2E7154F3E4874B6E0C8836497017D58
-:10C400006499486704B3707DF7AEBF95D6379F0532
-:10C4100088DE2A9E90FD2194030A9BB83D0E3F3C86
-:10C4200027F8E1E4469094B0BE93281FD1CE7D4B0F
-:10C4300016F2F13EB2231F146B054B86EA9F5B395F
-:10C440009EEA4C262D2E6735D0E9A61F921C3DDDB5
-:10C45000CBD7DD9D4F70D0E426C953F9C8F8EE1C48
-:10C460003F5CFE523FA0BB527C8EED5B559F6DA89A
-:10C47000A19F9097FCFB0F88EFC3BCED687F9CCC1D
-:10C48000E07A22767D7F3469F211F4AB8EBE747C43
-:10C49000CDF97CD3C39CAF353E0FDD3211DFFFF504
-:10C4A0006DCE3FD80FF50FCC2BDC9DDEEF9D21919B
-:10C4B0001CB0B0703C7EDEA40A7E36BE07094DF685
-:10C4C0001BCC5B9192F57402E3A712FCC92E99FF75
-:10C4D00073E8A7B3A7ABF17BD4CEDCF93CA7936F8D
-:10C4E0001708FEDF8AFC9FD4C9FF6C7DFA35F96717
-:10C4F0004BD4D07FFE1AF915F833E8417E55FDB8CC
-:10C50000EECFB6ED7FF74EA0EBCF1A343E35CACD55
-:10C51000583EADD8F12043FA8CE5D3CF7AD6B0B8E7
-:10C520007C0ACFE3F269CFB6FF11B9A9C1ED480C7F
-:10C53000DC400E3EF5B22731FC62E560B5C9135709
-:10C540000EC2EF6D56D895EE347AD3E86CD16F2ACF
-:10C55000FBA0BCE9A0478DDE3AE851A3B7D8751A15
-:10C56000E116FB7E3DCA1B9D7DA0AE604127E039F0
-:10C57000B24B263FB1DD1371A5C27757DBD81CB48F
-:10C58000B3DBDDA29EC2EB9174731DCA05ED79C4C5
-:10C59000C6E30DEDFE882B45673F1F6B965D1E7849
-:10C5A000DF166213E3D9D52071E9FB6D2CD1FBE5D1
-:10C5B00004BFF1B2A377ED08F4AB642FDA6EF72C69
-:10C5C000BFDD85218BF6E6BCA933E1F9BDAFC91407
-:10C5D000D368B7BB86E2BCC06F57B200BEF3049EFF
-:10C5E0003F65C15F16C1BAE63573BBF89EB54678A4
-:10C5F000CC773C60463903F667271DE8E845DB2722
-:10C60000A8586F7CBF88AD257C2D8AA19F80F077CC
-:10C61000B264413FC3D830E16F9870BCA5424E8DE3
-:10C6200097F3A7CE04B8B71F949905EA179A6556F1
-:10C6300087EBDC268518F271309DE8B00AE403D35D
-:10C64000F9856790CECC89F9F7CCF31F157E0F9A48
-:10C650002C79E183A1FF01E59917DEEFFF0AD65F90
-:10C660007CAFF707AC6BFBD2DD5FCD46F9DEBEDBFE
-:10C67000C2284EB2FB77BDBF87F5972D5E8A73AC9B
-:10C68000B0F0F8D46E67A81FBEEF05F8467DB9EB91
-:10C69000CBA16DA46F56119ECA64EE475C68FEDBA9
-:10C6A0009FA46E58C2AA508FEE4E22FBBAFA655B69
-:10C6B000089DCEF65D5F16061CFFBCF554995980A7
-:10C6C000E8CFC966EE407A4D01C4C1F7AB5F19F3FC
-:10C6D000F472F87E65E35EF33C785FBAE7EBA1287D
-:10C6E00057DA7770FBE09CDAF624F3323655FEC554
-:10C6F0007215F0750E6DB51E2097E4778B838E78DA
-:10C7000070E170680738E0BA002E15280F13C16376
-:10C71000FEBF2C3CCECFC6EF2F691EC5E41C3D5C8E
-:10C72000241F7FEE0C59255A3F7FBEFBCBA12877F3
-:10C730003F6B584EFAFB6AEB5E8DEB4EFF7F69DD77
-:10C7400052F85AD6BDE95F76DD9CFE07C95C1FC56D
-:10C75000F241573A7FF1BB54FFADD34BF3BD46FED8
-:10C760006FF9975DFF3F88F71D12EDC75D0DEF274D
-:10C77000FE65D77D35BCBF26F0EE7463BCB77DD7B0
-:10C78000D7BD996EFD575BB749F957956F575EB79F
-:10C7900066F7B49A6ADC23607EEFB3FA5B73A0FCA1
-:10C7A000BDEF623774478107FCF1FC860285FB0D03
-:10C7B000168C3361C35B252D5ED46AD8C7ED594111
-:10C7C00076C614DF8FC93E604A4D6B31B46F2D9928
-:10C7D000E77D845A141C0D607DC6385137FA536FBB
-:10C7E0004ACC27811D3BA564D241B4EFA6FA64B2BE
-:10C7F000FFA024BBEF9DDE13F8F3D1463FE28E1875
-:10C800003FE0F699C6F7B78AF16E634BDD23005E11
-:10C81000B7F554DC2100D11DC5352AAEE78EBB2407
-:10C8200056AF8B57DE1A339E4B61224EF28FC1EF0B
-:10C830009E0EF82D2578B062D9BB995D03FC188750
-:10C8400077EB8C61218CC330C5CBE1775BA597E298
-:10C85000A0C2CF54457FD5B1A615F9566546FF5203
-:10C86000F31313C19909BF93C6C9ED84BBEA93C9F9
-:10C87000EFD48D47F0D0F0F1F7E241C3DF7F171F0F
-:10C8800085888F38FB670BADD65B71FFC23A4022BB
-:10C89000BF7DEA5A99F260ACF912C1D13F5AA5FDA9
-:10C8A0009D3F9BFC856838970F1F55F5101FD68B51
-:10C8B000F05928E0389FD590DDC92E7FF34D11EE59
-:10C8C0001B1184E0BD8FB1C9E087CC2F92C276588E
-:10C8D000FF028505930B30AE29B1E3FAB866C8585C
-:10C8E000C7DFB7323AC7B95AFB44F2E19F5D7E0C0D
-:10C8F000F2E8785FF057B054E8F38ADE4F9CD3CC6F
-:10C90000E158BD440AE5121D8555BF6E5FE77D41C4
-:10C91000D71F7F7F38C9B9E29F0E4926FFD53788D8
-:10C92000ECFD6A61EF5F087A92315E73A1392F19CD
-:10C93000E331170E96BAF472512B8F083FF20FCBEA
-:10C94000AC54B69749F532FA5B2C3285F470998D68
-:10C95000A1DC89EDF792A2C55D6ACC1497879F5C34
-:10C960008878E4BF05D035395587B7B5934F29434B
-:10C97000BBE2017FC775FB24FF5DF8A2DF8A703D33
-:10C98000626B9BE08FB3DE3704FCCAF77D65C63867
-:10C99000C1B4E61C15E132AD4C36E4DDEC57843F02
-:10C9A000359C0DC77995EFBBC93506F17250F6DAA3
-:10C9B00000BED5CDE7CD8138FB6DB1F0C4F1312E8D
-:10C9C0007C42F5CE47789EF8B18D05811F0E8BFD18
-:10C9D0001F78E543F90543F9303EF6B6C2F7150670
-:10C9E000AA3C2E3EBDBC584D87EFE637BA87A18AD8
-:10C9F000E921DA0F543DF43E5BF4D3DAF558C2DB9B
-:10CA00001D33BBABE2AD7FB299AF7F01F37E77B44C
-:10CA1000F4AF87B7E29F3AC325A8DFCB2492235D0A
-:10CA2000E99A117F5C98288550FFA21F4BF5728907
-:10CA3000F4FF612DFF601AD7971ADDC7C25952392A
-:10CA40009CB5EFE7A89C9ECD2A878F06670DBEB1E7
-:10CA5000F3D5DA83BCBA511F5F99DA34ECB7689F1B
-:10CA600054354B6E0CFD55296D66E4C3EAA6475557
-:10CA7000DC2FB8C3C3C7658A7FA87EBF76A0AAD0C3
-:10CA80007CF6178C25FBF1E25A6E1FFBEE39EF4264
-:10CA90003BE8B0C9FBFBB1C88F6FCA944F90088EBA
-:10CAA0001F2CDB32A34CD18F9B43F39CBEA458C5F3
-:10CAB00070D07796EC55BBEBE869A09A4AEFB5E7E2
-:10CAC0003D96780AF0397C8FE611FC8985611E4716
-:10CAD0007E436B4912BCFF4E4D0AA7C38A86BD66D2
-:10CAE000AAE7507BED7BDA7762F969467992A13E3D
-:10CAF000AFB4AD27C2A5DC127EC01B874E5B546D60
-:10CB00009FE4EFD4133EA0DBA1FF3FE889F3137C41
-:10CB100071E0F698DA453F748FA71F962EF7744799
-:10CB2000F82FDD95D71D9963E96BE333E2E9877749
-:10CB300096F1FDC0F7409E61D93E03F4C3F53AFD7E
-:10CB400030C346F411DBEF07EA35EA070D5FFFC398
-:10CB500072E61DD40F71F8BA5E35EA87DB9AE79268
-:10CB60007EB86D86CC3CBA78DC0F55B1CF95503F7E
-:10CB70001467DC4175D59B14876EDE117E09C215E2
-:10CB80004BFC0EEA893D42EEC7EA8B44F27C9A598F
-:10CB900012FBD55791E7FF97E0ACC9F3A5E0BFA022
-:10CBA0001DD8950E19C9EBA577803C97901EB93C0E
-:10CBB0005F7A97884BC6C8573FCAD7117AF9CAFB24
-:10CBC0005705B83EA86ECA797C16BCBFB35EF55A4D
-:10CBD000A1FD9D9DF2B6502F6FF708790B70EEED19
-:10CBE0008E83DF99B39298C728AFFAA29C3A31ECB2
-:10CBF00077F93B91EE0FCBB48FF867A1C70F0DFB10
-:10CC0000DD088C9F77332B443F7F16F2EBDCB2D0EC
-:10CC10008C32E0E3D27BB83D5CB94D263854357296
-:10CC20003BAFAAAF3DE481FA8482AF683F70F12E3A
-:10CC3000BE1F08802A2FD6E171F1E1B6BA6C7CBF25
-:10CC400041A2FDCCF9DEC514C767EB789CD80AFF7A
-:10CC5000F0BC0E1FC5912B05BC16366FA078F3C231
-:10CC600090310E5DD9F7E653E80F68F277F19698A8
-:10CC7000F7DE8769BFA212E3CD3A3F4416F6C3BD83
-:10CC800072387F27E676FE9EFB55B1F8D7DA75AC91
-:10CC9000BFE2BFB9FE23B0FE11FFFCF55FEBBA5552
-:10CCA000B3E0F7023602F9E3CF261FF17BF07558A7
-:10CCB0003F7CE79E47FB75D7E719A509BE3C6C0A88
-:10CCC000D46561BB2A89DA2D58BFFD4006D467358B
-:10CCD000B06118A65FB0CEA8173BF470A387F4EC40
-:10CCE000AC9AEDD2DDF9086F56837436AFC012C02E
-:10CCF000FDD423B608C92F8DEEC699393D8F15DFB7
-:10CD00003DD12352467E4493E426BE08DBB85F0142
-:10CD1000F0B7417DFF982F270878533CA6BA89E3E6
-:10CD2000A71AF0817C35A159D4B7703BEC3BA06FBA
-:10CD3000683FAC79AF8AFD2AA07D1AC99B41867DE8
-:10CD40002EDC9F2BCED0E16DD7314EB79B252F8B9C
-:10CD500083B701F04F5CBCFD93E85583C738B3B08F
-:10CD6000E705FE8ED85ACB87D33E94E4DD888D9BB1
-:10CD700053681FE593FA3CC2E32441BFB1748DF6BA
-:10CD8000BD47174FBA05270EF2954DB4519E1B7D36
-:10CD90003797DB3F7A7912EB3757B356B263264B9E
-:10CDA000818F145D5EDB6D22FF44DBA7D5B57B5C14
-:10CDB000BD423B96E936A19CBC5FCBB7C4FCE10CFD
-:10CDC000CA5BA2DFFE5E85EFCD82F55E5C237B71E0
-:10CDD000FFE77693E7DD22E4DF4754867479F1902C
-:10CDE000EAE3766712C9DDB9874FA8180A990B30B4
-:10CDF000417CCFFD0197AF27703078F647D05B3E7E
-:10CE0000DCAB670D23317F788677EF780FE0E5D6CE
-:10CE1000114756E33EDCF452F7BBEF227C1F961914
-:10CE2000C2F7F89A52F24FEEBF4F22BA3E0A70C4D0
-:10CE3000FEB7CEC879F75DF8EE5D6BD2695F6D968F
-:10CE4000EFC078A4B379539D0EDC5F9B344066013C
-:10CE50001D1CEF62ADAB515ECFAAB9EF569C6F05BA
-:10CE6000E8018CB356341F19DF1DEBEB25AF07C665
-:10CE7000AF0E06CCDD0185ADEBCE9B31DE311FDA86
-:10CE8000217AAAD7F376D59B24AF0DE9B1F9519257
-:10CE90003BF33749CC8DEDC1DEB3F271435618B781
-:10CEA000753DF487FA02EC8FE36E4AB90DF7D1AA0B
-:10CEB0000FC9BCFFE8E5AFA25C9A0FFDE0356BDD62
-:10CEC000741F8DB770BDC43261BC8AD1393F198DD2
-:10CED000E31D52BDF8FEBDBDBF32E3BC67C3F7B270
-:10CEE00060FC7972DB786CCFBE27B93753BC89E719
-:10CEF000C9B60B3E606F6771FE92445DD8819A3E61
-:10CF0000FC833997E8697EEDF23A5C575B303D0768
-:10CF10005DA0EAA6F366B4EB3E013807C06E3B2184
-:10CF2000F2D8F6074F98DB74722A62CEA3FEF7346C
-:10CF300015137FDFCBFCB4DF1D58CEF5F0B1D5B6AD
-:10CF40009084F687EA263DB97FF575BFC4F59F7BCF
-:10CF500056A5FDD173BDDA281E7B72BDCA8230C7CB
-:10CF600095EB65921B27B7F13890FC844AF5050FC5
-:10CF70009AA9BE7FFDF409280F4F02FC910E4B9F2A
-:10CF8000186FC6FA0290EB9638F263BE67119717D6
-:10CF900031F261C13A23FF7791170F4CE0F23D4621
-:10CFA0001E54F6ACA3385FAC9CA8660E4D3E1460D0
-:10CFB000BD359C45F45B75486568CF5529EED9EBC6
-:10CFC000906E66D970A718F8227C00E5DAC590E467
-:10CFD00009C2FBEFCC796924C2EF2F086FE48BB54F
-:10CFE00069B49F3A3F3497E0AAE5132E5867A467C7
-:10CFF0002D7FE98E80CC7C7A3D5091C47CBA76EF4F
-:10D00000FD00E812BE37A7490AD924AC1F7BF5C141
-:10D01000115477231D56D50A7DBAD64974FBDEBF5D
-:10D020009D5F8D7439FBFB12CD9F050375A857AA30
-:10D03000D6491E8C632EF83EEFBF00FA23BDBCF725
-:10D040002B4E3F40C71EA4F3AAF58FBE4AED3749C9
-:10D050001E1CFFBD0D7349FF56046546EF371D23A7
-:10D06000FB18F400E501ED0FCA1948E755AB2C6E2B
-:10D07000C4A3462F1AFD1D53C53901AB77E874E8E8
-:10D08000B7C1ECA175C7D29D3C3387E8AB7A9B4A08
-:10D09000F4511DE4F474EC5999E870FFEADB897EE1
-:10D0A000CE6D9612D05FA9390BE92FC4DF77D0DFA0
-:10D0B0003392A03F4ED7271FE0F4588AEF91FE9E8F
-:10D0C00017F629630EBDDDA1D19F464F57A3BB2E96
-:10D0D0007A2901BD816D7C1BCEEBFED5369A77692E
-:10D0E000DD4BB7D512DFA8B43F5F5AF76F19C8A759
-:10D0F000F3159E87A1C1B152E1793A5DE6F1F3E5FE
-:10D10000E6AC6B994FCC3CF676EAC502D48B9857C7
-:10D110001286EFFC6EDBD394BF7676EB31CA4B5CA4
-:10D12000FC0AE01DDA9FDBE66461B2A743245F16C8
-:10D1300035CA9417CA9470E174DDF9112DDF62F1DC
-:10D14000734E82EFA21D965039F45FF4C289A1B4E8
-:10D150001FBE22F22AF24F70ABC4E3F2C1B6A1D3D4
-:10D1600031AF52E1791FB17A778C85C76BCEBC9411
-:10D170003413ED1F69CB5EDA4F5AD470BB6AD1C548
-:10D1800027BD1695BE0BED689F260878C77D449C89
-:10D19000DF2D43F4F35BCEC77B86F3CDA22695EC5F
-:10D1A000A2455B36505CAF7ACB79CA7B2D7DEE59B8
-:10D1B00017C2A1BA4936E6436D91C316CAD7928FFA
-:10D1C00059B87C32E4255535F27319550D22EF27F5
-:10D1D000262F66F173BB5E08026816EFFC2F17F26C
-:10D1E000D1E9D6CD2E84278C47F944534727C83739
-:10D1F000BA5A9E51C3C371F38C4EE37F0081CCB603
-:10D2000018F333D9162EA700EB85FE38F14CCD5E0E
-:10D2100059FCECE74F62DEEB991D9F3D89F35EF20E
-:10D22000BF2E3E89791B6CB7CD8DF643F5D6772896
-:10D230007F50EB576B11FECF33FF457997E7DEB791
-:10D2400090FD776ED7C9DE681F9CDBFE5506E6535E
-:10D250003EB06B3CC51F1E78BEB43B8BE3DF6A2536
-:10D26000D265E81AF23E63F1B0BF510E3B609E6793
-:10D270008F5A88BF3BF2C51A2A79FE9D47E4896D13
-:10D280008B9F57ABE53755354E9F3A0EE55B23D75D
-:10D29000E31DF94E57CB0F7B1BF079FD35E06D9BFD
-:10D2A000C8FF8BC1DB59FC0FC0CF2F2CC6FCB0CF01
-:10D2B0001BEF7DEAD7F8AE31FE79328D8FAF062FA6
-:10D2C0002D6F779EC517B220DFECF80DE5E121BE8A
-:10D2D000CA3DA8E73FEF8D71CB4FD508C50323BBEF
-:10D2E0002C6ECCDB5AB4EB3DE28F73CF1FA1BC5840
-:10D2F00026F267CFB18E1FCF77143189EA4D4E9E4B
-:10D300005726E08E79671E173D17F9659C6EB5BCF0
-:10D31000B344F966EF5872C5B90B9E1757E96935E2
-:10D3200023FCF57968D268C4D33143FE9EB6EED8AB
-:10D33000F1DC088751FABCC944F97CC21EEFC01366
-:10D3400097C3E736883CCA8EFC48C67A1660BE0F83
-:10D35000D777D521E93D16871FB5BCC9D6587E0CB5
-:10D360005D5BBEE4D5E7FB8FC163BF85C79F34B863
-:10D370009CB91C5F1E7F26F81BFC92D316DDB99466
-:10D3800039C22FD1F2C8B4F9D63570BD7B660BB760
-:10D390000B63F9B94AC4DB63BFF395F84E55D3DE8E
-:10D3A000A12877CEEC7B49D01BA7E7AA6DC7CC415B
-:10D3B000219F437AF98CE3C59127B2958F077E6C44
-:10D3C000DCF1AAB79D8F3BDE69C5773BCEFF742B9E
-:10D3D000B7334E37C8134371C63F2BF44FC7BA9DBE
-:10D3E00066F2AB64979DE4CF03CED14793BB6169EE
-:10D3F000A6FC8595CB45BEC30FBC9908E795CE9B8F
-:10D4000019CE6735C247E767AAEE00433B47CDF424
-:10D410008F40FF499BAFF6DEDCCDC4427AFC2BC1C6
-:10D420009E18779D92FBA582FAA57599F15C47AB92
-:10D43000E23E9006E3B596495EB467BBD29971FCB3
-:10D440005B7CB2211E86B1675CD705AF89F0E934F9
-:10D4500085DDD084396DAD99E4C8799847C9A09429
-:10D460006EDADF7E64D9965E78CECAC5BC12BE770E
-:10D470007A3BCEB7D078C92C36CF9ABDDDB790892C
-:10D4800023C0F8DEBD17E312F6016C009EDF713396
-:10D49000BB17EF57784C9C7B5CEB0C90BE4DC837AC
-:10D4A0005E7EEE458B13258F560CE762527CC67A62
-:10D4B0005ACC39484D5ED3113A80FF0471EF43CA0C
-:10D4C00078BE7E8C57F5CBE89C6F4A3AF386F1FD27
-:10D4D0006407E5333B1C7C7EDA7C613E240F004C04
-:10D4E0007C3EF96D41B4C3615E317CCCE8DC13CC89
-:10D4F000EF78CCFC0C76DC1D56A11F14A6A01C7185
-:10D50000585B9980F305639E699061DE4172075C08
-:10D51000E13D8C93234DB560DE821BBDE03CFA5E9D
-:10D520004CBF9E6EFD79B1EB85DE28CA64F974AEFE
-:10D53000B0B91BC9ADDCDA127602EA523DA78FBE44
-:10D540006B19D17DDF88C8635965277B4CBB774059
-:10D550005258502DE8A43780C80A3C17AAAC019A4B
-:10D56000817ECD9112D3BD00D4067C05E3DF6BF53F
-:10D570003D68857675B704324DC37039C5AB5A8A9C
-:10D58000E814EF408C309996FB5A0EF62251C3D81E
-:10D590000DF8DED782B45AAFD54120E27D0BF5F607
-:10D5A0008EBACF0A72B23E97D757AEF1AD5A03E3A7
-:10D5B000C94EFF4A2BF2B1D53D88F62FC2D776EE81
-:10D5C0005D9BE7804DE1523B4CE2E6080014F0DF42
-:10D5D0000F7990ECE4563312C96687560F931DED10
-:10D5E0006F3C427E7965C3117A6FC23A947DD2C294
-:10D5F000A5D9B0CE8DD65BCA3207C2788D73334DB4
-:10D6000020A27F63BDA54549D7C3E156031C9415ED
-:10D61000D35B0E8ED3C3617A0BEAEB6B85C36FD6F7
-:10D620004C5FB5A6E7B5AF3BCBE6DF8A7899546C83
-:10D63000223935EAA883FC35F8D9283E25C6D99089
-:10D64000E0DCA3668F6BED343A4A442779CC3D8801
-:10D65000EB1723BDD4637E37C6EF02016FD9F04EBE
-:10D660003A65EEC0703C9F9E65BB3B6CD5C5F52608
-:10D67000152F9573613E943303CFD36B83B6FE4071
-:10D68000A7E93E13E52367D90207705DAE99913093
-:10D69000E6EA8C6281FBA5BC4E7AD7BE53B78BFB02
-:10D6A000A975734DA115240FDA245C7727DEDB62A0
-:10D6B000F01EE1786F3A4678AF6A3EC6F1DEB4BC40
-:10D6C000C42EF637D00FAC67916188CF0FD6549631
-:10D6D0002940D77D922275480F2A5B5C566E23B88D
-:10D6E000BF8FEBE90277313F0DFE89F0567F30F7AF
-:10D6F00047F9E8271D32D17E8606AF8E76369E77B3
-:10D70000B7C71EF80B7EA77A74DBAB28DE771C7CCC
-:10D710008BF6D55D87A6EDC5FEAE1980094FE7777C
-:10D72000EB0FAD2841FAAF8F50580DE44C248876AA
-:10D7300047627870BEE88047E331828F09EBF07C66
-:10D74000AB389752D424F950EFF64902BB04CAAF64
-:10D75000ACDC2F74DA645A8FD3C6F57BFAA17D3224
-:10D76000FA1945AB4CD43E1DCB7CFDFA57897E8A15
-:10D7700021CF4CC3A74647403849B7C09CC72407B0
-:10D78000CCB6917ABA494DCA85F7A35AEEBE1FF5B9
-:10D790009BD6EF27CB98F71EDDF972A09F13067A70
-:10D7A0001BA2DA106E5A7BA44B7F9C7B17A05F37BD
-:10D7B0005B3AFF0EC655B7B72C95E99CE235E2B54A
-:10D7C000D0C26A70FE8549AC6607F42F4C8612EB16
-:10D7D00069A2DE5DD4B345D9473C1FCCEB791F7AF3
-:10D7E0004D9203E3343C6E38D426F67315F720E4EB
-:10D7F000A3A1361E1F2FCAB493FCD7F8550170E2BF
-:10D800007EA322F61D7323B926C4A3C6BF4AC4143F
-:10D8100076821ECC553C26DC7F7E7D19C041492C8A
-:10D820005F6E1EC8CF8FC53E1F6B3319CE83FB3A88
-:10D83000CF778E453C555ADB7E320DDE560DBC4807
-:10D84000FB3F2B92AAC65EE91C78EC3C5EBFFCBB9A
-:10D8500024A4AFE6A825EE799107C4FA0F2E9B49C0
-:10D86000FD1ED6CE8308BBE55B249AA0ECCBE34734
-:10D870008596A0928AFA2F89C73B0A93B87E64DD09
-:10D8800073E89E8C42EC8BC2FABA4194B752981658
-:10D890002AA7FAE03CC6F33E75F98516D6615F11FA
-:10D8A000CA73119F819578AE86C93934FE8DCC68D4
-:10D8B0004F1566D7ECA7F7961CDA8762516EDF68C2
-:10D8C000F6D078B1BF52D8A7BE8CE699CCC72966EE
-:10D8D000C6F3C385D70515BCE782E5E5D0BC4AADE4
-:10D8E00031EF07F3FB45B4758CEF6247D57BF19EB2
-:10D8F000914903E67ACBC4F38BF06F1F0B9B734BFC
-:10D900007EA77CBFC97387B7CC607FD47B910FDFC4
-:10D91000F85A9E136F1FFCB0E0FB83CBFC5EDC6FFC
-:10D920007CCE06F800BFBBC423AD727AAE0EBF58E2
-:10D93000BCC5C2EF5BCDF3C97E8B855BF187DEB2E0
-:10D94000544F5738C5C2653CAB1F40F7D70838C79E
-:10D95000C2E5752BA787D7F32D21F42F5E5700CE94
-:10D9600080AFD73D12F91B85E27E0D20724E2F1A33
-:10D97000FD24E5707A4936C23D16BEB1F0D4E4C04C
-:10D98000AB082FCA2FF1958FCFE85C7F61F79A968D
-:10D99000141DBD68EB2FCC1674BAA73F9F8726379E
-:10D9A000AE137244C80FCD5E1E2FC6037B99ECE107
-:10D9B000D27427C5654B2BF938A5FD1C1B31BF81DF
-:10D9C000856FA47CD942267E516EDF823DCAE9B3C1
-:10D9D00079C229F4AFFB5802AB9C18879052685F5C
-:10D9E00009E07E3C06EEC78D7037DAC9B170780E5B
-:10D9F000FF634C577869F4D6621376750FD613ED32
-:10DA0000DEA12F8D4846F9CD9A53E3FAE9A38EFAA9
-:10DA10003BC611744B7429B140C77337D041D380D2
-:10DA2000D58FA13933D65A2F23FD8D65BE34BCCF97
-:10DA3000049364719EDABC864BFE77509E8D699B81
-:10DA400098A6BFDF44FBBE06E77102CEE358702FF5
-:10DA5000C651C631E5AFFA788336DE9F6C22DE9080
-:10DA6000CDB2713D45B83990DE399EB6BE3E792CB7
-:10DA70004CF7DF48563AA707FF0B9A533BBFA7E581
-:10DA80003F4F724EFBD44672B886F13C9F3021B1B5
-:10DA900048BC2F12F78CB18892E85E29F64D52E708
-:10DAA000FCBEB0490ADD9321E677768B3588F946CE
-:10DAB0000F49814BF89D33D2A1A1C4AF4AB83FDDD5
-:10DAC0003311F3FE62534B15BE8776F3A99D58D7E9
-:10DAD0006299C77923BB2C749F4F42FBD30AAA4B90
-:10DAE00027078AEC5C8E8CC7785F1EC90B05CBDDDF
-:10DAF000E779DE7871538182DF397081E759973099
-:10DB00009F827ED78D51A3BF76553A75C7C66FC425
-:10DB1000BD444AA437C255B3CBF2ED81EE76C0D7EF
-:10DB20002A21DF9ACF4FF020BE360E1879F37468A1
-:10DB3000923B70F834342B4CD65615F5DD5D82AE31
-:10DB400046235D4964F56874E5B1A31DBD2686AE24
-:10DB5000DCA9063F6E160BD381C7A21AF592C11F2E
-:10DB6000147648AC7DDE6997D7C7F5E7580B38A81F
-:10DB7000403FB3057C57A5988328B794FB78BECF68
-:10DB80005D8CF5C63CA0BB6A5483FF393B4521FC44
-:10DB9000CD5E6EA33C4FBC376A2ED403F09CCE35CD
-:10DBA0000CE0F74875E0B356D71FE9C09141743BCC
-:10DBB0005BEC87FF49E27EF8EC944FD2C9690FAA6B
-:10DBC00017F4F419FBFD84E3C6F45B25F178CE2A43
-:10DBD000D597E9D5D91B13EDDC7EBAE02E5B67BA89
-:10DBE000C2FD06016B8F7C45771F505B8A7566BC52
-:10DBF0007B24B4F1347BAF28C0FDF044E3F68D9470
-:10DC0000911D66FA795846FBBA6F84913D5C14F118
-:10DC100099E619EC72EE8F76B1CBF13E03A82F692D
-:10DC2000DCCBEDF286E564DF2F01FB1EE5F906DCB7
-:10DC3000F3ECC1F884F2C95EEFF02B31BFA5A84127
-:10DC4000EAF03B15C07B5E3D6FBFEA9171EAC30A03
-:10DC5000FA85814CD58BE18192D556F073EA7298A2
-:10DC60008D819FB3C25E327E2DFAA5A93E89A55053
-:10DC70007DB523EBDAFDD855F6E2D5E8C726F227C5
-:10DC8000ABED1E825F227F5276FA57D975710090F4
-:10DC90008B71ED8F49CE9235D84E93170F9BC27979
-:10DCA0003FED46F941945F7173EDDD64EF4FAEAD2A
-:10DCB000F0E2956EEDFB2EF7C7FC8A2281EF5FD86C
-:10DCC000B93D599DC4ED48490AFC02F9B375C0D36A
-:10DCD0006B0B803F6635F1BC0DDB75977BD37D40C8
-:10DCE000239FFE79018CFF5144A1F842B393C79B57
-:10DCF0003F6212D9AB45472CFE46C0C365905076B3
-:10DD00009DDF729995519DF5CC309C0FFE88EDCD2D
-:10DD1000FB297C2758C3F3942ED4E42423DE9B559F
-:10DD200063FC77AB9DE7B76D15F4370BEF8D1C8E59
-:10DD3000EDC2D9787FCB2C25AC527E46D4CCEF39BE
-:10DD40008479E07C9A6DC67176DAB9DFB5D3CEED11
-:10DD5000F859E2DEC9665BEC380A1F5FDC33170B4B
-:10DD6000F7347BE98BB89ECBCCD744780279857A9F
-:10DD7000A16844CB51B417AEAE7F7C12EA9FEACBC8
-:10DD800052B80FC6A71B55F2DFCF8873E2671BF7A7
-:10DD900067DC0D65E5F63FB8D0DF7B4DE0E9ACD23E
-:10DDA0004AF7BC2C795EA67B0AE0BB19DFA1FEF323
-:10DDB0000AF9392B7E4E48D3CB055FEFCFF6F3E05F
-:10DDC000209DFBD1ECCE71D66008E7D7BC5C26B9AC
-:10DDD000017ADB70EFCF8DE2DE9F587BF463BB16D8
-:10DDE00067CEA0BC9F07DCFC3B89F8BF289ACA42DB
-:10DDF0003AF950A484659C7F5134838500BE670F37
-:10DE0000E63E568EF4CA546F3F1C56612D640F8B4C
-:10DE1000FD1BF8B5E0FD74BB45654FE3C5E96389BB
-:10DE2000F9DCAB06439B6F8503DDC83EC610686115
-:10DE3000A7DD7763D418578DB5934B9A87AD42937E
-:10DE4000F20C3E40FA8BF07B91BAD8CF910971ED7C
-:10DE500066C61E2538143C9F3709EF7B2978CDE430
-:10DE6000C6EFEE41BEC6787EE345BA8FA48A856FC1
-:10DE7000C3F7558DB23BCCAE14CF5AF5C68D308F5B
-:10DE80003D11C583FCBF27D2621D4A7513C5318A77
-:10DE90000E170D46BE6D8E2814FF2F3ADF92342FD9
-:10DEA000BFD37E69BE6CA2E77B2EEFA3E7DAB8CDC5
-:10DEB00091D4C1A88FB79BB83FDDF2EAA52494A7FF
-:10DEC0007B2E5F48E3F70F2DD7EE058AB59B092E11
-:10DED000A54EB923CEACB7D3995CF436E62B8D4F63
-:10DEE00056994C78E0FE6617FBE343B6CAC9BADA26
-:10DEF000212568D7C871EC914E781BECE7FE49C22A
-:10DF00007EECC50AF03EB7A6CB698BE95C677392DD
-:10DF10007B05C59DB8FDD0DE72FA6793F0F92199B3
-:10DF20009FEBBF2C133FEDDBBDB84F9B430FEF3A88
-:10DF3000C2DF1759E7CFBD02EDBF3860A77839536C
-:10DF4000BC83E3C5453AE3C4E11E7C7F2BD883DF65
-:10DF50003FC3E300DFEA8C0314258DE4F737A15AB1
-:10DF6000EABFFE9819E3287BECFE6F2511DF34240D
-:10DF7000A19CA8B073B9146425D96024B1E70F9AA5
-:10DF80004A904E462CF710BEB7AA604A215F6CE655
-:10DF90007EFB563C070AE32C6CA837E7E8F0BB5041
-:10DFA000EC377DAA067BA7EA9EFF3E89FBA59F1E54
-:10DFB00058F414E523BC6F61FDE2D89FA1242E071D
-:10DFC000779A8393B661BBE3263AE7D1F2EACBAF07
-:10DFD000F600FC2E3CEA1986F27F599287E0D57450
-:10DFE000686B5D0F68D7F4216A4930B937CD954D1C
-:10DFF000F0DD579887C7F3DE36D17C3BE29F6007A0
-:10E00000E27A7F20E6F3CA419361FFEA153BD76BC2
-:10E0100095492ABD9F97C4E3693B0E96A461FEE92A
-:10E020001E7B603EC2B3FA93B63A97A733FEA7D9D8
-:10E030008163DEDE316908FCE798332637A2CFF32F
-:10E04000F64619D7EBF994B114A96B7C0AC6AB411B
-:10E050003C68E3BD72868F07F3D887FC1659CEDC87
-:10E060009497C9FC3FCA87FA2BAD4A2AE62D6D1555
-:10E07000FBAA1A1EB4F568F3F03430DF0607B18648
-:10E080006FC795E2CC223F72B8909B5FDB7DC124C5
-:10E090001E07247BFBD30376B2BB768A7835CB9CF4
-:10E0A000DB07E1A7E169BD2863E793E8FB8F2771F0
-:10E0B000BDA1955B554F90E8E179AE6FB73AC3D6F5
-:10E0C0003C947F2FE551DD130C260DC53CA8A67EA0
-:10E0D0005EDCEFC3FCCF24DD3EEB3841E79E868853
-:10E0E00039478787C4728DC3BD837E9406A2ABA6D1
-:10E0F000A38CF86DD196FB787C11E481B8CF89F6BA
-:10E100008F912FC43E7296C44B17F2C998E60D2B1F
-:10E11000B33D74BE80F66D353878902FA0DC2DF0BD
-:10E120008270C1F72F89756BEF5F14F01B2FE72703
-:10E13000EBF31163CB3DCB3229A6A8D55F12F35F79
-:10E14000C81E253B74E1E57AB24F3D35BC5CF80052
-:10E150002FFBAF9F6BC6F8EFC275F1EFAD1B95C4F7
-:10E16000ED97B3820F98C9DE03F3393AF46312D7FF
-:10E17000AFA71A1FDB9F4DFA24F02AD2C70D4D8F8F
-:10E18000FE12C1A4D1FFA94D2AF5D7E488D6FF0D10
-:10E1900031FEF36F73FE19B3492DC17B8CC6049910
-:10E1A0001BE3E4AF6CDA2CA35C7F05F92387CB0D6E
-:10E1B000D4C79F1E7824E921A483632686F1F89DA5
-:10E1C0006656B15D87DF960D2F1AE4C1A22DCB27CD
-:10E1D000E138A3DA522594FF9A1CD0F0BDD3ECBDF0
-:10E1E00089E4C994187952C6FB47053C1F13F2E431
-:10E1F000B189204FE051CAA61409C7D9698E7FAFF3
-:10E20000D5671ADF097A1CDB29773FE372B7CD9512
-:10E2100007E3544DBE40F1D78EEF08BA7BAC4CA358
-:10E22000BB1C09E108F6BCA92FAE1BE083F40FF676
-:10E23000FC9C69F9C4A50715DAF711FB48226F8227
-:10E24000384CC7BF9A9CFBDA1EF81BF2496159CDC6
-:10E250004AF433D2CA8344D7A7A4409F54D057A7C7
-:10E2600090AFE3C885E3623D5FA8813EEE38EF3BA7
-:10E27000F988F5403EA8600113AE83AD97DCFAF350
-:10E280000F9EF59CDE521C92217F5CAB6BF0BA9125
-:10E2900075DC3398E248273D65C6BCCAFE21AEA7AF
-:10E2A000985442F4C84C37F7407E3BA532A29F53A6
-:10E2B0002017116E0BED463F445B574F07E7AB2F1E
-:10E2C00052F83AFE28F88E7CDC91D48EDB59C526B4
-:10E2D000DA8745FA207A9B924A7E0A38460AF17913
-:10E2E000C73E435896B83C90711E6EF4DF280EB4BA
-:10E2F00081E7856DDB40749332D14DE7191E53BC25
-:10E30000B6145D1CB765F3E3E437223DE11C12D17E
-:10E310006305D2238B438721A043E8973AB186F067
-:10E3200008F81DE5807153CA0232D24D2C7EB5FD2E
-:10E33000430D1E3B63F61BBFE7E07C3951949E04FE
-:10E3400079279D7AC2286F015FDFE6F8EAA46FC4DF
-:10E350009BC66FC31D57A6F39083DF075EF7D13CC2
-:10E36000CAF7D0F699B47D63EDFB77087A49B44FCC
-:10E3700094650BCC7418F6A396D27E97C627DADF85
-:10E38000A558BA99E7BD6DC73708F7167B487F5E79
-:10E39000CFAD301FE2B3C29143DFD3F0EBA935B369
-:10E3A000BEE02F7C9133B7055F7DBB35583E04D668
-:10E3B000B1DD1C9C3199EC6EEF4D38FE4DE526F732
-:10E3C0002312E60BB8258C771089235F1CE2DF61EE
-:10E3D0001EAF61DE4B05DC353C697048A4AF12E12D
-:10E3E0002724E0932EDEC7F275B983F373BEE35A98
-:10E3F000F93A2823DDBB586005DE3FCD8AB81CEA18
-:10E40000E0EB2246FB886BC578DA73AD1E87AFD789
-:10E410003A46EAF87A749B91AFC1C215FA94F82B88
-:10E420007D93CAF368059F7D61E3F3FD9583DB630C
-:10E43000E9A83F007FE941BE9FBA54D0195010E5CA
-:10E44000E5D56FB230C483C6F7AE19AC44C57D596B
-:10E45000D437D86A46E0E838DC8FCD347B707FF85B
-:10E46000941A213C9D0207B59EF0E9A73C935307FF
-:10E470006EE0F2607287FEF1E17E4FF08F3DF97E33
-:10E480008EDC4C74BD743C23FDD1B27914D141456E
-:10E4900079AE8474B6684B8A84EF53CBDC26592757
-:10E4A0001747D59A58DFE144B7CF3974727154B029
-:10E4B0004646B8F4490B64AA29603738E64CD0C701
-:10E4C0007F5E81BA3EFE03F5BABF27FEB37BED5DEA
-:10E4D0007518FF694FF235233EB26CFEDDF8FDC2C0
-:10E4E000EC1A99E9E4C5D5ECA66A113FFA70F5EB90
-:10E4F0009BE7C2BA673D1C598D6FE7607C7500E6EB
-:10E5000005F0F86A75F3118ABB360B7E1E2EF90FE3
-:10E51000E377EFAAB9C918678D5CDB77BB09BE65E5
-:10E520001F32827F377F8D8CF1084D2E7C807F8F4C
-:10E5300081FB8D12EEAB69FC807205ED4F2DBF01A2
-:10E54000E35ECED44EB98CF5649D5E5D5B6E8A7BD6
-:10E550005FED6987C3A0B73439C89AFFF6C243DAC2
-:10E56000BD995C2E9E76E8F4FE63E5C7E93C311365
-:10E57000F7D0DD2F7CC8A756787F7F5DB7CE73ECD0
-:10E58000C32CE620E64F82DBEB71EBF261A5662936
-:10E59000ECC43CCB4BE8B900FE2E99A87CEADFFD29
-:10E5A0001373D08F6F3279C112C03C09A2636F1F01
-:10E5B00046E71E1AC43E6CF17E874F1D81F7E65B6D
-:10E5C00049FEB5EFB50791AFDB9D268A1FB7ECB2C8
-:10E5D000105C2FF6B50BBF3A64F0BFB5FD0D9BA5DF
-:10E5E000EDAD22E8BFD1C6C7DDF8707FBA4F23D1A9
-:10E5F0007E77516D2EC5F3B4F8626EC463E2496153
-:10E600007C7C25C2685DDAFEF73ACCBF189138FFF2
-:10E61000A297D3ACF94B194EA4C3996DAFE2DC625B
-:10E62000FDAF8C43C7F7E23819B53C2CB0EED052A1
-:10E6300009D7B76E567CFF4BA39F7522CEA5CB732F
-:10E64000C873EAF5CADCD4A45C9DDCD4FAFD52E4BC
-:10E65000398C6AB97B27DA77C0D7694E1D5F4F1AAC
-:10E66000B2DA166FBFDD5FFB10C53F13D1BDDFC44B
-:10E67000EF5B8A7D3EDE29EC1825D283ECC03D5F3E
-:10E68000D83D71F21FFCBB4CF47741B4784CD7EF06
-:10E69000FF3BCDFF4667C7BE5E8F6BD9D78B9D779B
-:10E6A000ABCA7AC5D327B17993DAF7E2F4BF4B7FCF
-:10E6B000EF81DFCC02DB1D5DFB69F6AE5FE2F74E5A
-:10E6C000B18F18E9558D4E00EE7720BE861E9E371D
-:10E6D0001C43A9CC5A23A31CB8D8D4928D71AA4448
-:10E6E0007EA1361FF8F58B1767F1E3BD4A71D67727
-:10E6F000BFC0835FE5F6A7547CE03B382FFF79B3BA
-:10E70000A43F8731C72919F8498B83369F7F773813
-:10E71000C947359C1D0F7EB1FB96733068C5F51C4B
-:10E720008783804B5D312BB174A33801DBE841FF57
-:10E730008FCB494F2D23FEBE5EF2D1BA5738B95D5B
-:10E74000B38EB5525EE3C5433C0F79E87D1EFAFBFC
-:10E750005CA00F8248B7A35860A74997D7A5D143BB
-:10E76000DDB3609F18E2559C7F34BFB59788FBF4FA
-:10E77000C47B4274EDBACF0452D5C9FBAC80952955
-:10E78000BAF85A7685DB50EF559369689F190C4BA0
-:10E79000C85799B51EC3F34E39C5D7DB2BC836A071
-:10E7A000DE5FC7DA687DBDC57CAE9702441F170FD8
-:10E7B0009D48C5386448E003D6FB24ADB736705198
-:10E7C0004F1FDA7AAFB6AE0F97C17C80EFFF847E21
-:10E7D0003994773D704CEA4E707753DAEF1CD1AF25
-:10E7E000D7F78F90FFD8ABA695ECF7D9B57B25D49A
-:10E7F0005B2037A8DFBA65562A7FBDCC4D3254C3A3
-:10E800006F4F68877947DA7DF089F4D22EE735EBD0
-:10E81000A55DCE387AC9648DBC86FBDB95CDB20789
-:10E82000E960E5F753297FE2A9067E2E717F33CF99
-:10E83000E77BAA8EE76D6BDF3DF77C32EDEF9C1333
-:10E84000FB7CCC7729631AED7B5FCAC0F3451F3B85
-:10E85000026FE8E5E053CD9FDB505F0CD6F26463B6
-:10E86000F40B0A5E3CAF42671F25B47B86AD917105
-:10E870001DB70586634A1BF0F73B9C3EB91EFACDD7
-:10E88000B61293FE9E8E8B4D7F9DBDCFD3B96FA4E4
-:10E89000ED2B69EFB57D27490A7CAC97EBB1FB4ABC
-:10E8A000B1FB21B2CB4A79D65ED9EE958D7A95E847
-:10E8B0006E653FAE3757EEB513DC56F673D0FE2DBE
-:10E8C000CCF70CCEB705F4169EC3BB78D441EDB49B
-:10E8D000F9C37C871ED2CDB7DA1499BD4F8A3BDFCE
-:10E8E000CFF570EC3A5F633EB2363FD9A9D0BCDBBE
-:10E8F00099DD8B786B30F3FBDB826FDA291EDAEE61
-:10E90000BB64C37B83DBD9251BC6694F3B02920BDB
-:10E91000BE23F78AB8D00FD9DF7C7120D27FA27DC9
-:10E92000BE41CE1215DBC33AAD588E72072E6E6310
-:10E930009CCF0257E837C959E2708DFCBBD69FEED9
-:10E94000BA22BE8CEBAFC6BF83A2B3A324216F63F0
-:10E95000E94D6ADEFB15C6F581BF285F34D89B857B
-:10E9600056029CEA8608BA9BC1C4DF4132D2C3C7B3
-:10E970000E7F3F5CAFC6975780CF409CF75B0EFF82
-:10E98000606C8FF3C0F33C207786B8B89EDA894775
-:10E990009635FBA94F1E97639114467926B1FBB3B8
-:10E9A000939CD34660BFDC011E13DEE3FE77D0FBF1
-:10E9B000B82BC32F4C792ADA79E24ADC27C4737C5E
-:10E9C0008DEA19E3DF4B32C2E1B4C3FF6D1C375847
-:10E9D000D249572B3D5784C72484C35B8EC0142C67
-:10E9E0009D2AD00B0265F45CFAFB555936DF2ADC10
-:10E9F000BFDCBA9CC3A1FD590E87ED2D26A2E30D05
-:10EA00006C10F1DF20D385D9383EC8979938CE886D
-:10EA1000D67A13E6F3F50B794C748F536B83C97474
-:10EA200065BA9D25E8768EC0C3FD8887C1DB785C1A
-:10EA3000E50A743B4FD0EDB5C27D89EB8A7CDB855E
-:10EA4000AE6AF47475ADF9439238071B3B1E636DD3
-:10EA500014BFDFFB9285E477D50E7EEEB76AF749E7
-:10EA60003A2F5AF5B28588B2EC651B3FBFD2C8DF9A
-:10EA70009F2B8EBFBFFC6F2EEE5F5536DCE7D5EBCC
-:10EA80006BCD0EF8A9EF82BBAFDCB94F9736999FDB
-:10EA9000075969D3F241F97E9D4BD0595A2FBF0FC8
-:10EAA000F54EDA781E177239E6D37E5DD7731F9C58
-:10EAB0006FD3453FB7DB43F640EC399074BC179CED
-:10EAC000EFBB12BDC826BB17F72DD326C6B4734CB7
-:10EAD000A4FCB9F498FDBC904BD8C166964972D499
-:10EAE00016FFBC9792ACD97376935E9EA09CA7FB51
-:10EAF0007A9C565AF7D27496568EF101A742E73D9A
-:10EB000063C7D1CA149FC9709E286DA2DD705F468D
-:10EB1000BA3FD550EF3EB387A17D5620D7F03EBB1C
-:10EB20006290E17DAF9A0243BD4FED0D86F639400C
-:10EB300070FA7ADE9A9B0DEDFBD54F33D4AF5B773D
-:10EB4000A7A1FDC0D0DD86F783B72C32BC1FD2B0A1
-:10EB5000D450BFBEE921437B39817DADC159D6EC8C
-:10EB60006BE788009D1F735A25BD1D72D8C5EDF057
-:10EB7000629795E0BF5AE8E3D5E2BCD96AA18F5B02
-:10EB8000D20BAFB8BFF28FFA63675DC6B8578988FA
-:10EB90007B9DDB673621DD57ED07BAA0BFCB15386B
-:10EBA000EBE2F6D794B9B47A7E8EB235413EC79780
-:10EBB0002ECDCF03BF248E7F674AF6C4F5AF40AE9B
-:10EBC0005D72E9FD205623A31CD0E452751223BBCD
-:10EBD000ADDD15ED8F7C04724A4A4E47F9F458CDED
-:10EBE0003E944FCD16924FAF0F38417EF5CDB5F321
-:10EBF000092E875D3C5E2B9BBD1E7ECED4A8770F71
-:10EC0000A9AD94A77D68A4CCF07E948BDE51749E50
-:10EC100039113CDF44BF1964D77E940D23AFEE77E2
-:10EC20001E5A5641F9CC89C63B34CC4671CFF29876
-:10EC30007B7007093A2A4B16F0B470FFF1EC0B4ECB
-:10EC4000CA2F3E5BF00EFDFDA2B38D7F181EA4BF40
-:10EC5000D7D57A3FEEBF07FFEAA0B84CF9B0778668
-:10EC60002F27BBD6C7FD37F177C1C6BD78D8857EC3
-:10EC700077F9F6FDDD823AFCC5FA6D65627D4C6977
-:10EC8000EB4F79A1AF9CA2BF1B53FED2816E3C2EED
-:10EC900064CC5B89F5D7CB6BAB086F5ABD326A3554
-:10ECA000E4AF542AFCDC6F65D441F92BAE64A33F7A
-:10ECB0009F105ED708CFD8E71A3C0F0D3BC5CFAFEA
-:10ECC000DBE2D36F4DB2313E1C7BAE2051FEFAED3C
-:10ECD000A2DF45EF183A075F6E0EF7BD96F8820681
-:10ECE000A7D72F2FA0F30A2F2438AFE04FE671F7F4
-:10ECF0001706DC4B79C763AC35A5A8BFC788F86594
-:10ED00009CBCE37B9247623EF33F27EFB852C38F30
-:10ED1000C8EB1D837C9CCEBAE41D5FED3CC824BCCF
-:10ED20008F3B0E7FDDD401BFF767E0BD4EF73FA1FB
-:10ED3000521ED002984310E3261B548A9F1EBE6CBD
-:10ED40006118CF3EB95E7D1AF3552A9ED8DFF331A4
-:10ED50008C5F0FB3501EDD820DFC3E1036CC16C208
-:10ED60003C8D8A0D0F66607EE467C0B74B605E0B1A
-:10ED70009E48A73C9EC32D8F64209E4E097EAEF810
-:10ED8000FA87B721FCB79BDD838741B9649B64C8D0
-:10ED9000035FB4C966A86B79401AFE98D4991FEE38
-:10EDA0000139FA78B2F17CCBF0CE7D85C793853CF2
-:10EDB0009D0EF3AD1A79D18C78DCFFAA9DE6BDC714
-:10EDC000C1EF570B0FFBF28DEBA15EFAB5A2DDABE5
-:10EDD00063C82B62B80981F79C88FCBFD297948ED8
-:10EDE000FC7CE13738C6EBF2A0C3CB6A886F4A7F60
-:10EDF000C5FDE2521BCFD74D986FC4BAE4330F4024
-:10EE000079DE25CFA8F33C84C12ED1E8A63159E4A0
-:10EE10001B09BEDEFF2ACF2B9A7F48D89357919BC0
-:10EE20006FE2BC15C4D7EBB370DFF1B080C6E1CBA5
-:10EE30002757D13D44A3258CB0B19397E3F38D5967
-:10EE4000939F98BF3FA0133F93BD0B3BEAC89653D7
-:10EE500047DF67385770EDF2E6CAF2A436999FBFD4
-:10EE60008B95EFB174FF7F4ABE970F3BD01BCFC984
-:10EE700043F99F745E7E3B978FB17C1E2BCF6F8AC8
-:10EE800091839D72DC6490E337097DDE29CFCD2428
-:10EE9000CFC13CE3F7B7142AA19512F93D5FA0BE9C
-:10EEA000CE7778D28AA1CB2A776E52E0CA7EE82547
-:10EEB000E493765BE06B2CFBFC6610FD5DCFC1DB61
-:10EEC000EA4DC8BFED09EC8FFF0D39A0FC7700803B
-:10EED000000000001F8B080000000000000BCD7D2B
-:10EEE000097C94D5B5F8FDE69B2DC94C3299EC2BE5
-:10EEF00013761570801010A27E4900A3101C5001DB
-:10EF000035E82490842D24205AFA6A5F262460C4B0
-:10EF10006843B58A8A7650F051450D8235B651273F
-:10EF20008014AC4BACB6A5AD621044362582FAA76E
-:10EF30007D2AEF9C73EFCDCC3799B0F4F97EBF7F7B
-:10EF4000FAB397FBDDFDECE7DC6566451B181BC3D8
-:10EF5000D8B32636BBD506A902E930C6CEE2DFD546
-:10EF60008CC5380A66452731B6DF0A29D463CCEA56
-:10EF7000383494B15C6660712A63258A37C601E52E
-:10EF8000D5D6AE07CAA074C96FBE354311DB10EDEC
-:10EF90004D352632E64B37BB37E504FB93699203C8
-:10EFA0002A41BBFE2B0AD9C104C62C56E68B1AC5D2
-:10EFB0009862643ED3281CC7B5D200ED8D4D8CAD50
-:10EFC00081F6B17646F36443530D2C99B13BAC8C7A
-:10EFD000FE7C850C27C37C3BA2FD0D0A63DF332D2D
-:10EFE00003E7F303D3321D50FF23A665615E8EDB7A
-:10EFF00028D6693430EF565BEF79CD74287C1CE657
-:10F0000019EC81312B0A9937141E322D7018A95E24
-:10F01000C1C337677741F9671DB76433E86FD7AF6E
-:10F02000C6C67545A82FD3B575B5EE89D0F4FE3A9E
-:10F030002FA5F18C69389F5FD4CDA7BC13F25BA1DB
-:10F040007D85D933383EA49F818E788297A3E04F87
-:10F050009E01009743CDAA437141CA0CC5D8FEA0BA
-:10F060003FAE78BB6897A86BC7E7A9328DB101B0F6
-:10F070006E9BF15F5D02766719AE9751BF7DAD73F0
-:10F08000A683D38799B9ADD8DEBCE33A2BE25755B6
-:10F090003407E6253D5C0123203DDC839FAE606C98
-:10F0A000B4E2F538A89D9620CBCFE6E0F8C594975A
-:10F0B000E3B34C58715ADFF0628A7613E2EF08D35B
-:10F0C00066627FAD66769903D6DB1ACDE6479A6F06
-:10F0D000A9C05FBA43D00BB3390E5F26C683F99D32
-:10F0E0008CD16EC77ED2A23C65D86F5E46AD6A8277
-:10F0F00026B3A21DA2BEA67886537925D663A99A07
-:10F100005202F0CEFB04E810B2DBF6142A2E183FB0
-:10F11000B173A2E282F11305FE7ACD5FC0ED25C680
-:10F120008A23CD7356349FE75201FFFD560FF1D766
-:10F13000EA1C6F6A2DF4E76A659A1FDAB5E2944219
-:10F14000E0F396C34CF5374477F954A4FB5B987B06
-:10F1500013D0414ABE4F31429A31B5A50030CE1A84
-:10F160001C4EEADF59EC4D55A05E7AAAD9AD2A179C
-:10F17000CE6FC35A35D50BE3E77A0D348F759DBE3C
-:10F18000A8C130AFE44E6F8119D2A2F864EA3F857E
-:10F19000D5D6233EA03D43BE1CEDE0FFCCF516AA1C
-:10F1A000AE10B8E4CDAB6D30C3F7EFA3BD6B43F940
-:10F1B0003163B18FC639AA78FB39819E8EBE193D65
-:10F1C000DB8FFD059C4447B2DE5388D724A487C259
-:10F1D00074960AFD6F34D1BC7237FEEA36E4FFDC68
-:10F1E0008DD718951039F38AC344F58FBEB9B01F77
-:10F1F000AEDFF7370B1B14410EBD28E8E5618187B0
-:10F200006DE6C874F59C1C5FD0FB04A648F9F79C1A
-:10F21000907FB103607D4BAA4F91FC6B76B8A8FE3E
-:10F22000E3C6D6DDE900D7C7E731B70F3E2DDCBC1A
-:10F2300041C1F56E33B75EBB05E7B5C4C0107FBBF7
-:10F2400076FF6E773AE4E7CF738DB4B842DABFFD4C
-:10F25000EC6AFCFEF87C3612E19AE65FAB18003EE1
-:10F26000DF46B5D0BABFDD6461F530B5C7373E9231
-:10F270006CC77A5E8303EBF5E22340B32115D3809C
-:10F28000C9308EE311E595C49F843BAE1FE5E2AE25
-:10F290004DAFD0BCE57C8050CC08F7A27817C16B8D
-:10F2A000E1E6ADD722F1A72F762A6A4E705EE7938A
-:10F2B000FB1F0ABEB8503A7C339EF331C8790DC7A4
-:10F2C000F3E51949CE7F62F3FE1DE13ECCE64A2804
-:10F2D0008029353AFAC77861FC7E03D8ED9E08FC98
-:10F2E00078A9BD703FD63F19E53D807CDDEFB94B75
-:10F2F00027B258C62EDBD262407C9C54B85EE8CD63
-:10F30000A7423F0ABD28F5A42C3F29E8E20EA12719
-:10F3100023E8C79391F4A38BB9EE1B06F8626F1B29
-:10F32000887FC3C75D2AE87282E62D427E9E1DE378
-:10F330003D83F3BE629C7FA70AF5C716FB7622BF0A
-:10F34000E72AB53BED0017762D9703095DAC0396D0
-:10F35000C5E2F77569B1909F8B7200C61F7F44EBC1
-:10F36000C0F1E23C4CC1F6CF229DC33A5A9CECF668
-:10F37000E911E8FD36B12EC343DD66D46789ED0A95
-:10F38000F15B6FF8707904F232261EE697D70FE42E
-:10F39000694E6F791A017FCE786877C996C00EAC36
-:10F3A000352A7E600C343B17FE92E3097F5A0A8EA1
-:10F3B00023F175E959F576CFB0DEF8CA8EE7F3BFD1
-:10F3C000D3AE6561BBCF843EE80B8FC3E339FE8AC1
-:10F3D000E2B99DF3AC5DD48BD2D72B8BE778A988AB
-:10F3E000D7CB83107C0F8F8F806F29C7B7ED7949FA
-:10F3F00045BCE54D6C69403C005E47E37AC6E7D703
-:10F4000036E0F784A95C1E86E355CAC370FC86E328
-:10F4100095B17A9A1FE0E3AAF808FA4BF613AEC743
-:10F4200042E404AD6B9DA04F1FD227E3FA68832D01
-:10F43000B80EC93FB709784CF07A8BCC9C4E4B7014
-:10F44000DC2B66FB779A904EE7FB769A43E97401D2
-:10F45000A3FEE43C32BA7CB49EB47DDE024CC71FEE
-:10F4600009740C837A29B5B01E165C4F56E7870ADB
-:10F47000CAABACDA4E85A1FCDCB383E69DD9B98B6F
-:10F48000A7A88787F5D6B78CAD1474C8FB79339ECF
-:10F49000CBD5D55FCC4D45BA595DC0F5ED2ABB56ED
-:10F4A0008EF3BEC3A1CD45FCADB36BF3303F2B9AB9
-:10F4B000EB85E1F15A257ECFEA43DF2F117000B8CA
-:10F4C0005763BBC4E5CCA7C03AC6EEB3F9415500BB
-:10F4D000E9C3BC614189B53EC50C704DD4981BE5AC
-:10F4E00074BF046FBD09EA755FC1DC4F413EAED405
-:10F4F0005180F072CE7777203C577FA1927DBB7A06
-:10F5000029F3AFA47E18FF3F6F7F3FCA57E4DF5057
-:10F510007EF18979F8E2391F80BDF3F378CE9F75CB
-:10F52000C49FC2DE917CD997FD12C2D7AB2F92AF98
-:10F53000EFBF48BE5E2BF8FA97949E87AF1F0DF27F
-:10F54000F53A9CD7F9F87AB3E0E737057FF7C5D7E6
-:10F550007F10707B27BE4F3F67338ED75B8E73BAA9
-:10F56000937CF1D29E5131E5D0EF4E31CF10F9DDD1
-:10F570008AEB3B9FFCFE37F8FCF7D8EFF9EC54D947
-:10F58000AFC4F7F9F864B8D343F092F668ACDD4144
-:10F59000EB917C0FFCB247F0CB5EC12F6F613A2B31
-:10F5A0009ADB07E1FCD5A3EF3AB93C014F2606E907
-:10F5B000478E7FA437BCFE12095E594CC0AB98CB76
-:10F5C000914CE65363B1DFA90ECA3B4E38EAD155E0
-:10F5D0008C3DD4ED43B87D1BCFFDCC5C857922D921
-:10F5E00075C7049F247616927C01781EC27125BDD2
-:10F5F0002732C714F473A29C5C6E8C1EA7ED44B92D
-:10F60000E4D03C2ADA1BB94ECE0F124ED0FE8B4806
-:10F61000F8D88EF818D6DB6F08C7C3A762BE514E64
-:10F620000E8FF0FEA5FCC1FE8753FF2E03F62FDBE5
-:10F63000FF109443DF237EC62EAF55715D894C8B3E
-:10F6400041F923E524CB84F6B9BDDB9BC4B8D0DEF9
-:10F65000E484746C2DB41F166C9FC5020AC2C339B2
-:10F660001FE41443FBDD4DF66C9BD5637312BD3074
-:10F670002EAF0A0C240FA6D934E2A748FADF7991FD
-:10F68000FADF29F4BFF342F4BF33A8FFB19D723E05
-:10F69000FD2FEA8F709E5B4EB87BF022E304BDF530
-:10F6A000BF3382FEDF6FD5A8DF087C3412D713E3A7
-:10F6B000D046610A7C34DA9914D43BD06E0C7E6F4C
-:10F6C00013ED9BA71A86927DCDA2DD91FC9942A7EE
-:10F6D0004D37AF2B859FC2DAFFFBB7FF91C7580D9F
-:10F6E00016F179163A43FC9607A77E9AEC253F8ED1
-:10F6F000E9E22BBF5EE97E6F088EF7AECA90BF7E4F
-:10F70000FD9F5D6684776B74EC0816171CB7E65F87
-:10F71000405860CF9FFC97815289C725EDCA680683
-:10F720000C59B0F33B8A939CECF817C5492EB5975A
-:10F73000CFC075ED7A8DC74B4EBF7DD0897424C77D
-:10F740005F26FCC849EAB0D600D0D3A9CD6637FA07
-:10F75000212A733D920FF3A9D963627E9283CC8AEA
-:10F76000F54D7CBACCB47975A71A8B79A34FC439FF
-:10F7700094B3A4EF5C714897A63D2AF9152C919794
-:10F78000D7326BFDD9FE2057C719982B242E12AF04
-:10F79000453357489C22A1D8A9CB338CA7C0B88B3E
-:10F7A000189F6792275DD73E65767F5DFD34EFA594
-:10F7B000BAF28CF9A374F9ACDAF1BAFAFDC03F0AD7
-:10F7C000CDE7F8AED3D51FD03443971FD4728BAE9C
-:10F7D000FEE7ACF6E17C5CB74FEB1C08F39C27E638
-:10F7E00039645DB9AEDDA586D63CE068362FB070D1
-:10F7F0002A1B01FCE85FA8EBE7F8B3C57B14F8CE41
-:10F800005A4C8738BC6A19C28BD60FF0AC6C53D8EF
-:10F8100063D0BE6A1D2F97EDE6B7AF5D9D01E9028B
-:10F82000BFFE3B637E33CAFD459BF5DF1F74DA13D1
-:10F83000294E93CED2CFAA91E8C046E39D5AAFFAA3
-:10F840002D803FD537248C0EF4F860FF4BBA700939
-:10F85000BAB0A4EAE922CAA5A78BAABDDBF202AC22
-:10F86000379C63863A23C251C2D9EED6D38B842FFC
-:10F87000E8C9FF13F8BE81F08D09C2372DCABB035A
-:10F88000F9EF74DB7295E1785EEF686CD797FC9DB9
-:10F89000622FDC8DF2E274DBD7B7ED80F5D5C47052
-:10F8A000FE3FB9E3BBC128DF64BDEB5694BB278E96
-:10F8B00006E02ADEF7B07FF9BD73E8D3CDA3603D43
-:10F8C000A56D2AF1F149A3AD49B99C96E97200DC16
-:10F8D000941EBC713C4ABC29ED3BFFA900DE2C30D4
-:10F8E0004313C61BC7B9AD384F8CF421BD286087C0
-:10F8F0009E8D217DF231CECF57A8318AF7FC89B990
-:10F900001BA056833DEFB2F3C4050E38495F7A1B46
-:10F9100051BE8EEDF49EDE82DD1B3B1D18FF9DE285
-:10F92000F5D27A2EC70982FDC41C00277BB03DB4F6
-:10F930003B8EE34E2970C6A0BDB575D732F2DF58B5
-:10F940007B22D9834832A1764EB89F25ED46B0D3AD
-:10F950004FF17978BE7686DAE9C26E93F6765FFD6E
-:10F96000807E1D8AF6415FA9B2431D6A04B8742BDC
-:10F97000D1EEA722E80D4B82DE9FBD3218DFB22404
-:10F9800084E88925779EDE8DFA03E01D9D00F3B49F
-:10F99000DB417F2B17A4BF63B1FE2331B144D7DD18
-:10F9A0007B55FF106870CAEA8A7302BCF2519F5CF3
-:10F9B0004E712096E10CB6ABB5A60F33823EC93F1F
-:10F9C00035348E9D23AE9E8FF54607F3ED514C677F
-:10F9D00017AC1EC5E7E512EB3C10C5EDACB1225FDC
-:10F9E00013168FAA69E2F1D70D6660B5907EC62620
-:10F9F000D879BCC75A3016D7B341C4A157E7286499
-:10FA000027AC5614B21B76DA0AA9FC90B3200FE19A
-:10FA100077B918672C8C81FAB9A5BF988FB0C764E5
-:10FA2000FFDDA27EB7B390D2B1090E8117C7A588BA
-:10FA3000FF0AAB46FD9A5535229CF313B8FD5313CC
-:10FA4000CDA49F46FC3449F0D76421478BEC204776
-:10FA5000B91F387512945F25F94FCDFFD00CA43B28
-:10FA600029CEC4305E7C959057EC8CF15394270ED0
-:10FA7000F81FCA276DA863178CC40A98E9D35039B8
-:10FA800053C83AD3913E8AACFAEF93B64F3E8AF20E
-:10FA90006F123306BFE77078C738837C7063428F7C
-:10FAA0001EC84439D516DDF5CB29E81FBFA3BA9F80
-:10FAB00062BDD75B91C0EDB066B4A36D042A0DE3BF
-:10FAC00097D9621FA5777D0E9F0D7DC4792BAC055C
-:10FAD0007311BEAADD538129B0C3A5C8EF6D666F4F
-:10FAE00003FA1DDD2F339AC7503FDB81F9E13E1742
-:10FAF0002E17F0EF8B1981743DD2407EBC6B5DCB2D
-:10FB0000CE282877AD579C0AE44D46E6B38F0ACA43
-:10FB100093C6841C9A6C7357F90E3B9427AD9FAE25
-:10FB2000F487F9B4B096A258B4B7D6B38871C13A85
-:10FB30004147530A76507C3DA91BE834021DD42569
-:10FB400018A41DFF9FB88EB1DDDED14AFFA03C2274
-:10FB5000518B7ED32E833F529C769AADA811DB0D3C
-:10FB6000F7B38871BF9A683E8F26AB670DD2E9F074
-:10FB7000ED01F287AAA45C9F676046A0AB1B841CC2
-:10FB8000BF617DC73FC98EF8EEEC5955DAA18CFAFA
-:10FB9000672897AA6EB4FB317E5FD59EE3A379797F
-:10FBA00014F720486ADADFF760BE2A37D78171661A
-:10FBB000EDEF4C393C944C58C6E59F911D967A96D2
-:10FBC000EC06748A189B21E8B906FDD124D21FCD1A
-:10FBD0003100FFAAF5F53BD2A0BF3F3F0D7D40D1DC
-:10FBE0003ED5BBEF67D0EF4DA0C4568CC2D4C84AF7
-:10FBF000290E9D4AFDDC28FAF1FD0BC6B506C7BDEE
-:10FC0000A97D2FAD679F89F9AC40BFA6423EB4E9FC
-:10FC10003FE2FC0D2808999FE86CA6B56512EAD76B
-:10FC200093E6EE116EB47F5FFB6B960FE0FFF1CFB2
-:10FC30004FDBD12EFEC4D86DC7EF47EEFEC0AE013C
-:10FC4000FC3EBE5B2D4678DF26F48D847787C07B33
-:10FC500042A2A70DF1727BDDF779DE10BCB3154926
-:10FC6000C43F0BFC30C310BB63D1E618B4847AF2F6
-:10FC7000D5AD09BABCD41FD516561B290EF48DE09C
-:10FC800097055B3698335C38BEF72D1CFF8891D3FF
-:10FC9000CF91ED76BF2F27389FF22D23CD68977C2B
-:10FCA000D26E6101D483C64E13B37139A3003D787F
-:10FCB00005DEC3E7B9FBF518EAAFE2575C2E95C144
-:10FCC000582B00AEDEF605247FC2D751F1B16B721E
-:10FCD0000AC0BBE25E85E1BE0AD6BF1BF0E65D71DD
-:10FCE000CF5768E785AFB3CCA79747739BF47929C3
-:10FCF00027AB04BEE7317713DACF152DFA7A55ED2D
-:10FD0000F751FF556172EC7882B0AFF2D8D8B3608A
-:10FD1000A734D8FAC779CFA1AF4ED4815C1FCCD815
-:10FD2000B13A2BA547EA18A56D092E82F7E2F6F73E
-:10FD3000EF42BA59D2B6D58CFD34FA2739C64315ED
-:10FD40004BFBCD0CBF5B705F159ACEC17D559827DC
-:10FD5000DA3A88FFD18AE77BE44793236C9F55AC5E
-:10FD6000AF54C09FD9B85D518AEB1981DF8D5F8791
-:10FD7000AEE7D49ED1561CD79C28E4F15858977A08
-:10FD8000E1EB92EB91EB93E5D52AD05984F692BE44
-:10FD9000DB04BDCDDB387D753A80A2E1B5CFB3BBC6
-:10FDA000B85F4AF6BC51E0C7685B43F6BC9181BDC1
-:10FDB000CED729EC79F621F2ADA4B3703AAA423835
-:10FDC000500087B7B30A3BBF877EDAEF2778483CFD
-:10FDD000037FA48A7DB354DC37033A3A144647BA0A
-:10FDE0007C458B3EFFA5A92B1BF91BE8E550287C21
-:10FDF000BF0C3B6721D3A4C4FE0487792E6DB203E8
-:10FE0000CA2B986735DF5F6D21B81C31B6ECFE193F
-:10FE1000F2DD464EF79F08BCFF32D1332111F59534
-:10FE2000511B81F2BD70659A9A08F5CA9A1507F2BE
-:10FE3000D3DCC69193910F47318DFA9B9310D94E25
-:10FE40009B93C8E15F5E6B6266B0EFCB610C946B15
-:10FE5000E5DB55E273A0235B09E061BEC043F5BD5D
-:10FE60005BCD6990CEAFADE276829FF30BC095EC8F
-:10FE70008485CD1D66A457F04722F29BD403D5ADEF
-:10FE8000FAF21AD64C78A8413E93740CE3CF4E1484
-:10FE90007CE6666EA447EF5D76AB1277FEF5B2DEC8
-:10FEA00071058A3B9CDA3388ECCA532E570AD6F385
-:10FEB00002CE3BD15E367AC7E2778013E9A3EEFA31
-:10FEC000183FDACD07CE803F88369CC33B16EDA4A1
-:10FED000AEBF67B1354A903EE57A6AACCD449F35F6
-:10FEE0004CEF6F96816383FB9B659B12FC3E85FA0A
-:10FEF0001FD18676C52613D90D3EB62C95019D7966
-:10FF00005699481E96B7C593BF5BDEC8F701CAB7BE
-:10FF1000C4FB55EED77F38302F8887038D45E634F4
-:10FF2000C2538E9BE2C36D261D7D4BFC84FB8B0B65
-:10FF30009B3A76A7BA7AFB8B11F073A80FFC1C0AC8
-:10FF4000C54F73187ED8DD095CCE2C7D739015E605
-:10FF500077AA36CAAD46B037A41E6299408079C1EF
-:10FF6000F853713AC70733BA93119FA79BC710BEC6
-:10FF7000C2F154FCC35CC207FBBB9DA13D3307FC2F
-:10FF80009019F0FD7685F3C79C866B8B515F6F4AA5
-:10FF9000E472E63D904F9A99B1F7413E69209F3E49
-:10FFA00000B985F93FD7A552FEAF752E4AFF5637E7
-:10FFB00094D24362BF54F20D108019EDC2E704BF22
-:10FFC0003C9728E381CB53D17428FEE1833106347A
-:10FFD000DD7D33AF9B94C5D8F59A5EDFCDBE51AFC2
-:10FFE000CFBA4C8EC9A9E8B7DEAB90DD57EE99A029
-:10FFF000ABCF8C2EF3740C6C0F1D1DFC4EF69CCBFE
-:020000021000EC
-:100000003C03F8FDE6A909BAFA339B3274F99D89DD
-:100010002E5AF7F4E201BAEFB7945EA6CB979D0192
-:10002000208C466A76121E965B9930169D3C2EE80F
-:10003000E075BFAE1D9BF21398EFD76F9BA83C1CD9
-:100040001F12AFF3D6199817A636771DAC0DFA3DDF
-:10005000D402788276C7F7D9C9BF58BD65F4BBE32F
-:10006000207F608B89E202071A131E40FBE8C096CE
-:10007000A45806A977B52AEC08879985C8ABA2C60B
-:10008000FADB502E95F92D6EB21776F99E947917FA
-:10009000FAA33849E4970F553FC6B7007F3C2EF0CE
-:1000A000AC85ECDD2360B7E1D6F8118535628A8A2C
-:1000B000250ECABFE94CF2233F17FFA06AA9484F9B
-:1000C000CF46517D8A5040F9B1F7073DB586E8CB60
-:1000D000D51A20BEB5903F30B78BAF8F29A3321011
-:1000E000FF47E299160F93A85EF6D7FD46C0D3826C
-:1000F000C19D2302D0AE342790340BDA9DD868A27C
-:10010000F320D8AF03F2D5CF59367039A2A54C1FD2
-:100110001E0A4FFF085CF71C83E7FF2502FE8E5581
-:10012000FA47903CBB3B89F82A1CEE87CC5E82AF35
-:100130000FF94009CAC7209FF17D1E106A69286720
-:10014000E69ADCC9A89F0E359BC8EE04FD113B9DC5
-:10015000E22B2F111D1F32BA26E3BA0F35E530947A
-:100160005772DCF26695FC02A43FAABF56F5828D59
-:10017000C0A49EF235295E96D29B6EEE583A3605A3
-:10018000D7136EDFCAF44BE0556F88BDB0F035D59C
-:1001900043E78172BB8C370E0F5D4723E7B754DE10
-:1001A000FF7221D717F7FFC37E9B01E5FA80388CD9
-:1001B000931FFD50253A3BDABF252F1548FF846178
-:1001C00047DE4F207FBCC477D808F9272DDE814950
-:1001D000B0A44586E66CF48F4EB61F7C6002B43B3B
-:1001E000F6BCC98DC32E7C76413F8AE708FBBAB7BF
-:1001F000DC0AA473FB404B53009E8B5CADA4B75D3F
-:100200005B14C6D7EFE7E705841E773CA4A02DC595
-:100210000E8EB1AFC178C75C608F50BBFBA089DB8D
-:100220000579495C9E48FDBE5CE4E71A385DB3D7AA
-:1002300015FF2661EF84EA0129972725F5A7FA3DE6
-:100240007A99B592BCAAC4731DB0BEC59B2D7E7FA2
-:100250000EB571209F2FE0E861F5492E7EBEC7FCE8
-:10026000FCC3C84355AC93E67DCCE4AFECCCC1F6FF
-:100270001B1A9DD4DEE4A6B8ABD027566020944765
-:100280005582EFAA5B147F80F886EBC50AD13F4305
-:100290003D1322BF7AEB15BD3EA9107AB48285C505
-:1002A0006D5BF4FACD1363A7752D8471515F06E77A
-:1002B00005F631C0ACD2EBDF3D8DE6ADB8FD11E601
-:1002C00051C5BA03789EAE7A8BE20EB0DEF30A5FB8
-:1002D000C785CEB3D23D7D627C6EC8B861F396F01F
-:1002E000A6C06F081E24DC2B7D1C9E95ED0AE1EB59
-:1002F000336197C11FC59B25DEAB98671A9E37A84F
-:100300007A08E4654E900E7AF4FE56BF19EDDEE3EE
-:10031000AC25D60674BF78DDD6995760BBF5EF9350
-:100320007F51EA0C0C32C4837FE7EB58539CD5DB3A
-:100330004E08B70F7E2CF8E0EC8D79A21DC0A362A9
-:10034000A3AA458DD0D5A3F6D23E98EFF399319E5E
-:10035000395FC409CF37CF1AAC37EA42E61BD99EC2
-:10036000F9DFCEFB8524E13FF5B2870645F4A37A99
-:10037000ECA0F3E8DF8F4C812CD4BFDD5946D23F8F
-:100380005F1BDD7F2D48447D3C88FC82BEE46BA56D
-:10039000D0C315A897213DBC6E5B2CFAED9F3DB4F0
-:1003A0008DF6FFCCCF57C4A25D7C78DDDC077CC026
-:1003B0005287B7CC253D5CF598D4C35E73A87E2FD9
-:1003C0005A57F6EB9F237D6E8E725BA0B8729757DB
-:1003D000D8DD20EF500EAEE3F28E3DC4E56115EAA4
-:1003E000AB61A4AF8660BDBB2ABD4390CE43BE9334
-:1003F0001EBB6BAE772CB5678E00FA5D203903A863
-:10040000AFA43E957AD668F07E9484FCA3BEFDE747
-:100410009FC2FABF784925F7AE5ADD90EDC0FD8244
-:100420003EE4F6BF0F6F430FBC732E00DEE5086F8E
-:10043000B27F38BC3F6DE2703ED8CCE1BE7ACB8053
-:1004400058F46F3F6D1A4076CFA75B0611BCE7AD3D
-:10045000017893DDEBD2DB3D4D006FB4F311DE305C
-:100460006EF92E9780B79BC3BB49E89D669ECEEB85
-:1004700005571F9D1BBDEB698B1BF5F991A8401219
-:10048000FA2347B6AA0CF7E57BEC2261BF48387F18
-:10049000C35A9E443BAA973DB3D6C21CD0DF829775
-:1004A000ED7E06F9634A410A22E044CB1F6271BC2B
-:1004B000E0F83D768C23794C881D7381F859C23C55
-:1004C000747E7D49FB1FF6A11DAF68DCAF5F62B58E
-:1004D00005906FC1DF39112ACF1517CA348C93B834
-:1004E000AD56A4834CE6D2EF1B7919EE1B7D3BE899
-:1004F000ABDB96113F770F0EDDD7A9890E9830BE82
-:10050000D4BD55217C572F2F882D60B82F554BF324
-:10051000189ECCF5B1A2691437B400DD44C378EE5F
-:100520006417FFEE72F038E27A18D71E9C6FF8F766
-:1005300069487AA8CF6D06D2E7E1EBBF2D99FB2B76
-:10054000D5AA81FC8EC566EE7FC8F30F578AF22BC1
-:100550009379BCB72899EF179C8C62A4374EAE8D67
-:10056000F1D7D3FA26523CB3277E22E1E6307ED97A
-:1005700023AF90AF44FC603FB68179CEB388782E2C
-:10058000A8586C7FAB687F6BCB3BB42F079ECB1317
-:10059000A877E7ACB0B8D17EF5BD6621BABB279A83
-:1005A000EFA3B0C43823F2D12D42CEDEDA729F071A
-:1005B000CF3DCC6989D13085717C4CC44F73711F9C
-:1005C00036DD4CF1D3526BD7F3E866DF9E7AF04EFE
-:1005D0002B2CADDEC0ED967A27A3F3239783D98E1B
-:1005E000F15828DA7E36E15CF4A38F0F2FC638ED80
-:1005F00078C6096B1CC155975F6CE6E5CB93474DF8
-:10060000792893B13F31D770C4F762840DD2435932
-:100610001CC501AEC778B1135323D1D90C23F319EC
-:1006200078DA84A135193F9E26D67DD33816888383
-:10063000F506F6EAE3D7B30286C010C0C3F5C6409C
-:1006400007D2B5C1EA32A13FE0295646A19FBC7846
-:10065000E585CDF79EE42B69BE8B0D063ECF9F2A24
-:10066000FEA7004EB70293237DDE6664BBD4511C07
-:100670007F487F354E978FEA2DE5F42DE3E6124F44
-:1006800023A1FB50F8DE2AE607FD34C5627B73E444
-:10069000F8D183C9D20FE6F6E622C1AF8B24BD6D37
-:1006A000D1F3E936E4173C9F83762DC0ED5691F6E1
-:1006B00045EFAD82DE5B05BD3F29F2173A5EB58599
-:1006C0000568DDAF59088F72DCEB45FA4232B79B03
-:1006D000E53C243D3311873280E4403A3AD4D2409D
-:1006E00076D3FCB038300B8D57A991F23DF2C7702C
-:1006F000165373F73C9C8F7255941BE9FA5673EBB3
-:10070000A05A5BEF7A721FB794759AF8BD1B11CF90
-:1007100012FA6A926AA37341A54AB41BEDDF9305EE
-:10072000769F210EE32D26426D29D003CAE78FA2C2
-:10073000F8BEFD9CB8BBA6A15D581A6B36627A3B29
-:10074000EBB4E7E404ED92D5052AEEC1C1C0D55360
-:1007500034C837A03CE1F9FBB44C8A0E89FCB23FA7
-:1007600062F98DDF01FE297FC7140DE4C5C9374545
-:10077000395B4EED4FAE1274EC5B3105F7394EFE2E
-:100780004A96FF9C97DF2BCBEB79F9FDB27F915F07
-:100790001B565E1F56FE28CF773D5C3FC587701203
-:1007A000FB31A5E31592272E4167A52B0304DF52E9
-:1007B000C30E9E16B28021F7FCF56C291E5732ED50
-:1007C0000B1EB2A3DE4E48D35CC950CF96E43D8EDB
-:1007D000DF174E577C6694931FFA070BB91EF15C26
-:1007E000AD4BD06D542AEF4FC21BFAF91AFBBBD8A0
-:1007F0007ED6E1BC9274FD7CFFEFF4332FB5573FFA
-:10080000E6947FA39FBD61EB92765159BA9683FD22
-:10081000B14389BAF3658BFED31D877615C3F365A3
-:1008200000FA452B5BB34743FF8B5E7835BB32C480
-:10083000EF5E72C6C034B09F6ACE304A8F77FCCD6F
-:10084000EC82F92CD9DE619E0CF56A202D0A99D72D
-:1008500062794E9275196784E8F5C12906219FD601
-:10086000D27C17BD70D488F85C64683DFC18C67BE8
-:10087000C62B11F75D6345BBFD7DDCE71A96C2E52B
-:100880009E2753BB2C05CF45A0CC407DDC10799F23
-:10089000FE4ED15F6934976F73F3EC5617C079CC75
-:1008A000877C9FB9727DCE288CE35E9E543806FB10
-:1008B000EB3B2EDACDE3A2ED3C2E5AEAEC5C0EC205
-:1008C0009BD5A66CB8CF7A2563531E917C062C0B62
-:1008D0006D8B2D32DF3665623EC5B9287FC3235B41
-:1008E000EF43BED913CDCF4DCC193B3C1AE542574F
-:1008F0004E8CC101F2625C62592DE26FCED82B277B
-:10090000E3F7028B7D70198FAB135D8C4BF44CC1F8
-:1009100072AC8F710DAF99C7B9BC6FA914E7F28E95
-:1009200088F146DA47BE56C0A136859F73DD03685D
-:1009300046BB43CE438E0F86CAF24EE8EFD0CAB410
-:10094000916B5CB8DF515043F424C6FF65A2B73405
-:10095000747C58EE08FC7EA1F3B83985D36F0DE2A4
-:100960000DF198AF322DC45F9C31314697BF716A4B
-:1009700002D342E3AD3766E8F2B34B07E8EADF3271
-:10098000EF325D7989A533B7F622ECDF1ABB3D1A49
-:10099000EDB08FDBBFF9CBAD68D76D54DD0AAC6726
-:1009A000C16B9BFE32016A9DC2E397FCFE14C5BD7C
-:1009B0008EE17936E43DA3660CDDAFF98275D2B9DC
-:1009C000C090FD00DDBECB22C72E3AAFFA63EDD753
-:1009D0003C9022FCDF516C14EABF53B57FA638DB94
-:1009E000121B5FCF17AF1E30E339063C177016E8B5
-:1009F000FB1A6CA8229FFB280E5DD476C08CFE915A
-:100A00003B85CBE525994B8D6091B11A48516F4CD0
-:100A100006F91407F4D1D9C1866FC7731339763A32
-:100A2000075E7D66060869A423DFB0A5506F5153A9
-:100A300031E5979C89A67EDF533B27D379E4571491
-:100A4000DA2F28C998B312ED51AC7F078C57F2E228
-:100A500035C5089F25DBF9BDA712F54FB9D8CFE200
-:100A600096626A5FA2B23D0AD807538AB89E2D41AA
-:100A7000DD0E7935CFBE06F5AB6A0E0C7E1CE5891E
-:100A8000D94EF224EECC2D347ECD192BB5FFAD908E
-:100A900017A62E3EAF49673CF45DE2BD3D85EF03EE
-:100AA000CABC2969A311EF1598BA18D5BFEECCA519
-:100AB00094CA75BE35F4E9449463A6A4AF276700D1
-:100AC0007DBC95A838C8DC0893B7A76BC7C6B1082A
-:100AD000F2A8679C33FCFCAEE50C3FCFDB9EA6FD85
-:100AE00009F96ADADD5D46DCBF6136AB03E1356DDD
-:100AF000DC485765081FA93B6E36235E4C0FBD6F5F
-:100B0000467D6C81B428A4BC5A9E3B0F93C7FB045E
-:100B1000DFC97B0752BF30DF6CB2476F13FEB7E40B
-:100B20009337457DD9BE13691CF1F8B285FCA73F08
-:100B3000A7798FA3BCEC2C60B35F22F9D8998DFB09
-:100B4000263FD6FC01CF5685ECFB2E3ACF3E6D9C5E
-:100B5000CB80FB01DD3DEBE0FC7ABE757C2CEABF6F
-:100B6000A7B215D8EF7B575FDDA9417F1D3F1B3D25
-:100B70001AE5BE1C5749E5F77098A3FB3BF4E76AFA
-:100B80005E8F71215F97A073941BB463E13BC3F840
-:100B90005FCDEB96A71428AF89057F16C62F7A2361
-:100BA0002A8074DCF1469411F5437DA657491D83D4
-:100BB000DF874C44FF4D6BB71819D9379A01BFF73F
-:100BC00035DFF3C9A7703A937CE96DE2FC5226E861
-:100BD000B45CF09F57F0D1E9DA14E2C3D377C3A431
-:100BE000719FF36E65F876B4075C76F72057902F07
-:100BF0004BD0EF81EF2597C593FF17C277C4878B42
-:100C0000CF38A8BFEA332EC1E74ECA4B7E2B17FC64
-:100C1000621176C43C41DF49E9DE91A930FF9206BA
-:100C2000E07718C7BB322D17F928482F6607D21571
-:100C3000D04B6A6508DF3474DCCCD0FEB0247A88EF
-:100C40005EE6411A6A7F54F4D81F8EC9C930EF6935
-:100C50008D39BA7B1679A91747F70352C5BEBC2D4B
-:100C60003008ED55536D941BEF839D4AE4FB33CB65
-:100C7000EEE5F05B66F214A1FDB0EC51C50D9821D4
-:100C8000BB02E551DEBE5A7368BCF1E63323980B14
-:100C9000E070C39981945E9EE49D88F82F3B3353A6
-:100CA000C06BC4BFB50F3846E3F12593DFE2DE80A9
-:100CB000FB6C515E15F17B248B391E0C892F613C36
-:100CC0000CE362727F50C69B2CB89F1AA227BF31DB
-:100CD000B664A3BFD32BEE54A0DF475BDCF1A73C87
-:100CE00003941FCBD128FE34C7E0BD0DF1BA708646
-:100CF000FF0513E417DDBF2D16E3DD129EADC6C060
-:100D000020D493AD00478C83B536ABC57E6ECFC47F
-:100D1000F0FD2F4ED7928EC3E97BE199FE444FA799
-:100D20006B2DA4774E03BDB210BD23F58D94EF5209
-:100D3000EF487AAE3672B9556D8BA37315417D338A
-:100D4000DD83715C36949F7F0BEA9BA71E188FF49E
-:100D50007F3291CE3587D3FF2B75A974CE46EA91A9
-:100D6000707D23E5B994EF525FDD95E65D8B702AC7
-:100D70007CEEBFB7FD1D3E5D67E47AEB3AA39DE8CC
-:100D8000E7C2E5E60121370FE8E4E6923EE4FEC360
-:100D90001749FF8DA23ED8AF6417A25C0FEDEFCFCD
-:100DA0006985BF41FA7D2195EBD51F6BDE7DC9FBBF
-:100DB0001752A51F7161F2FE7151FF7CF2BE43C84C
-:100DC000FB70F9CEA03F94EF275FBB84F6A7F73303
-:100DD000D007A8F7DA635C9B84FC27FD101DE73F72
-:100DE00097FCF764CEEDE843FEEFF8DFC87F498F4C
-:100DF000925F247F487E08E71FC90F53EE03FF0F61
-:100E0000F1F41EBF5F546DF46DA1FD4357CC48E46F
-:100E1000CB1EBB6DBB427CD64B2F08BE09F2895E50
-:100E20004F48BE907C22F9A35AF04345183FEC543A
-:100E30005B1F1C0FED6E4EF39E0EE58BC52F85EBF1
-:100E4000853EE90A2386AC22B196215D55431A4AB4
-:100E500057963EF8E14C0F3D5D183F1CBE407A8A24
-:100E6000493353BDFF437A8A494B8A484FB6B41F72
-:100E7000D19E385DFBD75C17CCE7742EC8D99C2077
-:100E8000BD4DF923E3F6C2006EF7EF89E6EBDC63B4
-:100E9000CEA278CE94B3FC5CABA44B8967690754AF
-:100EA00088784271BAC78DF395FEC285E2D992D88F
-:100EB00069463FA402D250FDDF97BD3B26EDE2F02C
-:100EC0003C20EDC2ECC4C902CF3FA29D383D125E6A
-:100ED00099C3A98B4380FEBB81ECB780918EC8F487
-:100EE000E957ACE37096F95501A3D4B709A86F810F
-:100EF0005E66E078FF2EBD941431110F7C79AA96BE
-:100F00000F78FF85C8B357A7227E668E93E5BF6D25
-:100F1000D606A2DC61328E4E7191F75491F7BDF284
-:100F2000F644A83FE541168CB343F9A4FCB89E38BB
-:100F30008AC282F5973EBAFDED66C2333FF7C2BC66
-:100F40005D46BECF24F2B990B787E4C785E5D7F3F5
-:100F5000FAB1C62EC6CF29FA39BFAAB8F5C6E9C775
-:100F600013628F002627E3798269DB1507C6416E7D
-:100F7000C93F49FBB1C1F5BF41EB5FD2AE88FCCEA2
-:100F8000B771BDB76CE7F9471EFD43B36FA0E82FFB
-:100F900099E264F4676A55343CFFB0789CE2EF9FB5
-:100FA000D31BCE8FA4E9FD1BFC33EADB333C7F77F8
-:100FB00031ED11CFD4BE3FB50F582E62FC59F991D7
-:100FC000EF3DFC97AC27E209D43FC0F286D6C8EFCC
-:100FD00097BC28F8B113F74D085E1F3523FC3ACDB6
-:100FE000129EFF68C67837DD9F81FCAB8FFE63AA37
-:100FF0006F189FBE16B6FE73CDFFF108EB77E9DBE5
-:1010000007CE05BF0DBDDA0BFA99AFA7A738A367C6
-:10101000D769E8270EFC7FB48B9778A29AD1FE0F90
-:10102000D2C761A28F4E19CFEF45FF9F4F9D682316
-:10103000FB47D43FDA8C7ACC63E8A9CFF941D217C9
-:101040005E05C2B3738CB7FFE0D123CD081FC00F7C
-:101050009553DE780E7E680DCBE787F18FA07FE297
-:101060005F94F3009F4111E4CC29019F2FC4B9EA9A
-:10107000CE426E2776F6E7A9339DDB85FF12F83660
-:10108000A4F3FA9DD1217008C133FC05D00F095992
-:1010900037C1E9E644B9EEA892A9B0AE4E272FB702
-:1010A000A59BEEF7E507F3E1FDC5A64795205C8219
-:1010B000FD5BDE41B974B3809B33DDFA8E8FCB4389
-:1010C00005F9B29A0804E862BBE253D14F40BA88EE
-:1010D000B0EEBFF7A62B5F587BCD748EF65DBDDBFF
-:1010E0006B61ED9929F762DA0BBC4D0DC36B71187A
-:1010F0005E2786E54B65DEAF937F522E96B7AD5DDA
-:10110000959C88714985EE8A06E939A504E97991AB
-:1011100043D26F2AC13548CF69EF20FDCE6895F2E2
-:1011200030FD7E0DF0361DE5E1F860FE0694179463
-:10113000CF28D1E242F5452695CF6A92F5B3EE2746
-:1011400079DA28FBCBA6BCC423F3F52B21BCE60A35
-:101150007DE173BD83E50BDB79FB498FE5BC734E05
-:101160007E680983CBFAB0BC2FACFE43E7D12F8D4C
-:1011700061EDEF0E2B6F0ECBAF0BCB37E9DB97CDCD
-:1011800053880FCB801E1011E7E3CB9BD27BECD4AE
-:101190001E7DAAD8C86ED3F1D594069EBFFDB111AD
-:1011A000254DB6907CBABB24942FE4BD604B22231E
-:1011B000BE30F5212F4BD2F5FE59CF7A8686EB5BF8
-:1011C0005EFE09FE338DF6777476C14E559FEF5063
-:1011D000E5BCAF7A67B92D641F945D5982F195BE65
-:1011E000F75B26944CCC0CB14B7CE34BB49075CAA6
-:1011F000FA93BF3FABE27877A68F2FD988FB39856A
-:10120000621FD2C953D06B2AEACD1A118F998CE78D
-:1012100063B15E7460D0B2503B84B50EC67576FC87
-:101220008CDF1BF035007E30BEC6DC668CA774C434
-:10123000C5AD7806EAEFFC99BA02F5E8FE15097427
-:101240002EE94FE9DCFFDC19D72FB902F21D31B7C7
-:101250009BF1BD928E7B2651BA43D5567703AF3DA5
-:10126000F8D8B525B64BB03C8EE0F38BF44925F5A4
-:1012700040D7BFC44B3BD0DEEB7424E3BD06B6C6FB
-:1012800044FB7A8CB99F24BAB9DF3212FDE7B2FA77
-:10129000CB68DFAAFC57D327D3BD855526DACF808C
-:1012A0003F3A7FE25D3389CE3DCD6B14A9EF1A4AF8
-:1012B000DFF8E1E906BC1FD9FD8442F725AEFCBA90
-:1012C000F58F23F0DC63D30037A2E675B0EBF13C79
-:1012D000D2A7EB86D03D898351B574EE13EA33ACC7
-:1012E0005FF59DEBDD69B9585F75E0D18AC3F01DEC
-:1012F000EDE1C3F7AA4FE1FDC3B2587B349E973EA0
-:10130000FCBDEB5DB46BA1DCB112BE1F5EB5201954
-:10131000EDACC38A2B16DF1279F1B15925A9697892
-:101320002FDF22F039CB5E067C5E66E8A117D21F64
-:1013300095F13CFF62FAAC924D30FFC38F0EA17362
-:101340005F8333B4D674C0D3E90C6D2BA607C57D7B
-:10135000E5377EE0FB85BF3F519E8CF4F47B41C7AF
-:10136000AF9F294F2E0FB1772ABF3012DEDF30BB7F
-:1013700096E33CDF88CE52E87C366B4DC078F73C74
-:10138000E17F00FDAED816C1EE79385D253C75DCF5
-:1013900097948F780DD27125C94BF21B20FFF6630D
-:1013A000E5A4D70E5956B08368378AF38B6C67145F
-:1013B000BFEFB825CA1F9583F14F6D32B663A9AD53
-:1013C0008367D843F84ED4FFD8C7CFE77E0CF5D15A
-:1013D0007FFBD8F70F7BE83E84AC5F156BF7A1313C
-:1013E000F1B9DD6E443CEC37D61DC6737D954F9840
-:1013F00048EE573E91747737CA1BA0178C8F85AF84
-:101400002B35C344F0EA930F7D77944CD4F90777DA
-:101410009C930F0F3FB6AC64A3AD6F3EAC127ECA77
-:10142000E4274C744EBD6A8CDD88FB8F854FBCB9B8
-:1014300089EEAD2E8D1A85F713AA9EB010BEBAECB8
-:10144000769F03F74763EDC67848BF167648125E6D
-:10145000AEC4B88CCA8CD65194D2BD04B9AF7774DF
-:10146000C5830FE331CA63CC3F732CC0EF14220C49
-:10147000E0724ADECB0ADBE7ABDEBBCD5CC0CEB1AF
-:10148000CF779EFD3D205F7A47E242F7F96232C492
-:10149000BD9F9E7D3E13BD0B5125F6F98AD6F3F311
-:1014A0005B552BF8FB1D45093CDE7BA8CE878FC41E
-:1014B000E27A7D0EBC9FFB10D72F554CF15BE19F6C
-:1014C000D7AC5F6AA4FB8FE91C3E65E21DA7835180
-:1014D000EE6CF4D32B9F8822B8563DB9E02F8F4293
-:1014E000BBAEFA92C450BF3847D003F4CFF09EAEE3
-:1014F000ECE7F3FA9F6723DD17FD1AFC5BBCEF17DF
-:10150000CF5EB83907F194968DFB91B25ED5CA9F34
-:101510000DE6F5C03F063FB8EC5E95BFBFF6B2855D
-:10152000F41DF0782A0BB9CF3CAF71AFD93C2C78C1
-:10153000FFEB53C8E395FB907B60668497BC978470
-:101540007FA979C2DE7691FCA077784B0D0ADD5F2A
-:1015500002C945F77EAECFE0F6EBC40C7EDEA92CC7
-:10156000DB4DF75FAA1FB0B857E6F07E7AEE55E381
-:101570003927436725ED3FFED64271919AC6282D43
-:101580002A969F8B7869189D8B369A71DFC4C5E5C2
-:10159000C4F582FE6A5CD3AF417A81F27D463C8716
-:1015A00065E7F2B03A1EE0CEF5B06680714EE2BF5C
-:1015B00006F07ED346848CAF88EFD08F2B36D8EFE1
-:1015C0001E036BC2B80BD6BF6404C23161E66C9CCB
-:1015D000DFF32AF1312CFE817168DF3DAF8E46BF0B
-:1015E000B6ECDE9D93D7617EEB48BCB1C0CA5EF815
-:1015F00080F4C52281FF2E711EAC1CF278DF7F7E45
-:101600000697935E95C77BE60B78493A90E5D5F748
-:10161000F2F350D5AB2C64BF54D7FF95FAADB67733
-:1016200026A3DCAD7ED944F79817897997D767E56B
-:10163000EF03BA2A37C5D17BCB8B7D2566CC2F6EC5
-:1016400051281F6C97948D747ABCF19558A49F8390
-:10165000518141A887BA9746B9F11C9E8CB71D6F7E
-:101660001CF414C665E6393AED781F69DEF2014EC6
-:1016700094DBFB1D013396EF6FCD31605E7338F262
-:1016800031AF192FA7FC7171EE84FE905E148EE7C6
-:10169000C55B769AFBC3782D822EBE78FE83C1A8E7
-:1016A000A7AAB33B07A33E013A189C81707E56213E
-:1016B0003DBC640B3FA72EE96009D201F0DD424139
-:1016C000074BB6BFF213E4872588FF51BDE908E850
-:1016D00074177D7F69C364C6DBEF423A91FA0BF25F
-:1016E0008D2627C6DF441EC6C1FC5A014F289FC85D
-:1016F000CB7DC3F839B72E3AB75723EE2BF6C8A7E0
-:101700003EF0FC82C06379BD85E4ED0B02CF5DF74E
-:10171000BE1C8B78FCE2F99DBB719FA4FA25C5C164
-:10172000F7ABC2F842C0A506E1104BEB20BBA20606
-:10173000D71D1B84430FFD0B7EAC617C9D72DD3594
-:10174000460107592EDABF88EB4C42F80AB86D1FE4
-:10175000C2F94FF01BF233BDCF23D6E775EADFDDC8
-:10176000FE3083EB83D744BA18E802EF6731BC9EA2
-:1017700028E504147DB17503C57D24BEE4BC0F07C4
-:10178000F58816EF0CE2B1CBC0EF2F86EBCB7704D8
-:10179000FC0EAC4AC96E03B81DDF4CCF5412BD1A03
-:1017A00043C6937423C72B7A6EFA75B85EE83F8000
-:1017B000FDCB71F7FB628CD8CF7EC6F903E913E548
-:1017C000A7E4CBA28639D78DC473BFBE2FEC0386A6
-:1017D000E17A39DD1ECEE0E77F34B413A0BDD6A692
-:1017E00050DCF980F0E70FAC7A25B63C044E874414
-:1017F0003B4967F887F12839DF3D4E1EC70D9FB77B
-:10180000944372DE45F7CCBA0EBFCBF94B7A95F410
-:1018100029E128E954DE7F0BA757A235A93F559D42
-:10182000BC27FD784DE65766AFADF7F7F0BCB48343
-:101830000E8AF3DBDD498CC7EB1B537785DEF7811E
-:101840003F5BA8DE09D127CDC6107D22F57F4DA2D2
-:101850007614F1559CC9CF951C63ADE602E877F18B
-:1018600091CEC9F84EA2B43BAFFC3AA0C6611C6A47
-:101870003B3F7F26E1BDF8C42EA2FB6A712FA9EC85
-:10188000DE0F4AC6227DFFC644FB3165AB26D1FD83
-:10189000E3059BE6E621FDE07D0694E747378E19D8
-:1018A000CD9FF37224CFC47B0D1B1F9C790B7C9FB3
-:1018B000D7A6BA49AE433FC8AF65778E66482F07B3
-:1018C000A3BA4AC6A3BDFE53D581F6FA844D63EE92
-:1018D000C6FA13ECFDE2713DDAC604CA6BC638D213
-:1018E0000BD2CE95E7F21A4C9C1E466572FEB9A447
-:1018F0002755C479BC86C1B87FDEBD218ADE412A66
-:10190000358B7B9CAFA5903F5163C62B85742F947C
-:10191000ECB0F966664DE3E79DAD69F07DAFA9F3E4
-:101920004ED41F7BEFB48FA473F5EA7779E5DC7EA4
-:10193000E6FB8509FA7787E43C468AF1C3FB93ED21
-:10194000F788F3C607C5FC8F36FE6626EABFA39B61
-:10195000073971DD9FBF1645E7F03F0F7BB7F06297
-:10196000EF6901DD86DD835AC9E545A6FE9C96A494
-:10197000F3F3DE53FA28316C3FE0DCE78B4ED431D1
-:10198000BA4F6D015F98EC9998EFB7E1B9BECA16EE
-:101990008B03EFB31C42BAA7F33C2ABF776BE57CFD
-:1019A0007068EB483FFA8D951FF1FB45BBD6DE43CF
-:1019B000E70A2AC0AEC4A3543D76F2436B67221BEC
-:1019C0009C727B57E33B2FA736F37310BDDE2DD8F7
-:1019D000BB6D77E8BB05176B1F5FA85D2CE30A356D
-:1019E00099FA7BF112AED23F7A03F03F6E54104E5B
-:1019F0005FD6CD27BBF8449D97D293CA8107262096
-:101A0000DDDAE3E8BCFEEFDB1E54F19D95EAED2341
-:101A1000BF43FF76BC2DCE81FCFA65DD0ADAEF3CD0
-:101A200051574B69F05D573FA5576EEFA0765FB6F3
-:101A30008D6EC77BAEAFDBE284BC0FDFD7E178EC05
-:101A4000EBFEAE5CD7B19F727CCA791FDB3C3716C8
-:101A5000D7D5F17842FB1588C7983807DA7755E271
-:101A60009CC7E175DC7E3E628D7B662A9E0F597FA6
-:101A70004332BE8353D171E34CFC5EF99AE240BB22
-:101A8000DFFDDAF4588CA37D66EC8AC57B4D9FADF3
-:101A900093F7A1FCF41EE9F86246FB4EE30346E629
-:101AA000CAE15BCC4827579C30D2BDD3E3B81F8531
-:101AB000718FEFA229EEC1C43E53C5AB3C5ED2E3A9
-:101AC000C70A3F6E8258F75B994EB97F40DF8BC6DD
-:101AD000F1EF9FAFDF360DFB3BBAD1E4C0797FB9A0
-:101AE00091BFCFB010FC2FBC9A726433F76F16B65B
-:101AF0002AE40F1FDD0CFA19D655BDD4A4F1FB9AC8
-:101B00007AFA2B82723CD728E96FA1E627BA0E7FBA
-:101B10003F239EB5D2BDAE1F8B1E03997A3FAD8782
-:101B20000EFBC2BF8013F22DD2A1C4F3C2757CDFBD
-:101B3000DCD93AB200E949E25DCA05795FA1C1CCBE
-:101B4000F87BA58668FA3D80E936974981F5DF90F4
-:101B5000D83511C5E7B02C6E7FA845060DEFA1B1B1
-:101B6000064BC4F7A8FE26E4E89C2C46E93799DC2E
-:101B70005E90F7B1640A0BC9423D3D3DC6F98D0B3D
-:101B8000AA1C5EBF749A11E63F7D82F3CE016EC03F
-:101B9000DBFA9F4C3302DD4E1FED7CB93FE4BB33D3
-:101BA000EFE2F9CB9D634C90AFAF5F316D22D4B7BC
-:101BB0006769873243C691FDC2F7CFF1BB3FC17B56
-:101BC0000CD31A33BF1F7552E91EB1222758FF7D6F
-:101BD00085EDFFBD12CC779918BD03F34DA69C7F10
-:101BE000E4744C96763A734CEFEFE58CADA2F3714A
-:101BF0003E7EBF05FE3CD664BC7FC4E9A95CDE77AF
-:101C000069D2DF77616E7EFF4ADE4392F78C2E0940
-:101C1000DE9F5A7F31F7A74E9A60BD71BDEFB329A1
-:101C2000ED7FA0F7B01A7CAC2B8AF0A0BFBF521D8D
-:101C3000C3DFF75BF6F217BB90AC16487B05956DDA
-:101C40005EF0FE3E4BE5FBFE770A3AFCBC8E0D1CB7
-:101C500008AC7C7D6767AC0B267B625A6030F2B7BC
-:101C6000CBE2CDC8423F7E7D43E6B244BCF769710A
-:101C70004F85FA47FCFC5EE562616FB28D4982CF09
-:101C8000D5C0D5506F4FCE25F47EC3A02CEE479C17
-:101C9000C80964E37B3ABE1CEEDF403D3ABF56BC48
-:101CA000F29A24AC7762EB3D032B006F167CBFCD1C
-:101CB0004929C3FB4FD742DFE39CF4AE1B53699F16
-:101CC000D64FFD61BD58D4EBAEB9A93C8ECEEFCD59
-:101CD000493C49F8F7C20B4C01ED5183959970FED0
-:101CE00097B0F50EE453891FF9FEE9B29779FC64C9
-:101CF00099D2D59880F9E7153AFFF6B995DFEBE967
-:101D0000ADE7369911D4F3D7CFD5BDCF23DF19FD79
-:101D1000B1E34053B3847C19C94686BEE35A25DA41
-:101D20004E524B5DF8DEDBB2242BBDDBB1EC8901FA
-:101D3000A44FD8DB77B0D07A6C7D02D1C7EA1C956E
-:101D4000E0BCA08DD1BB3B256DE9745E716A9B93AD
-:101D5000D2D833A9F4FDE8337FCCE5F287E3A1E4E0
-:101D6000BF520AE97CD07F0DA194F5F5AEB0CD4A03
-:101D7000F76897EDE57A69D94D2AC52799B81FEE1E
-:101D800011D3F1D89A289EE36191DF8FF5C8F763EC
-:101D900035D339DF8F95F0B508FC84BF277BD3DEC0
-:101DA000D1A9F41EAB784F76B6A8D729EE6D85BFC2
-:101DB0002B7B4FEC647A5776B65615F15D59A32FFD
-:101DC000CA8DF6AD29D3C6DF6BF086BF33DB65C4A1
-:101DD00075CFCCE7EFCCDE343BE45D04F8CF94FF65
-:101DE00015C969537EAFF7814C48DF168FBE7EB3AD
-:101DF000C4FF25EC9273BEE39B69A677DE8CF89E48
-:101E000033E4678A777CD18E43FBFC94C6DF95B3BD
-:101E10008877A63B596E2AF2FDC5BED3FCFFDBBB1B
-:101E2000CCE1EF2F87BFB77CD9E665BAFCF0D6FFCF
-:101E3000D0D5BFBC6DA5AE7C64608DAE7CF49E5FDA
-:101E4000EAF2633A1FD3D51FBBEF295DF9155DCFC9
-:101E5000EACA271C794997BFB2FB77BAFA579FD9CC
-:101E6000A1CB17B03FEAEA17593FD0E52739FEA1C9
-:101E7000AB7F4DEA415DF9B5AEE3BAF229434FEBD2
-:101E8000D763F4FE0DE57C89FBBF75EDA631D72F36
-:101E9000F0FDE75989067AAFE31F59C27F1174F745
-:101EA00057A9B707B26C945F93D4FC00D15D9BC275
-:101EB000DF1F0ED363C6E31E0DE371EC157EFF2B0F
-:101EC0000EEC3E63C878F19A151CC2603EA1D8A101
-:101ED000CB27795275F55366BB74E569DEA1BAF27A
-:101EE0008CF96E5D3EAB769CAE7EBF159A2E9FE35D
-:101EF0002BD6D51FD0E4D1E507B5CCD6D51FB2CEB1
-:101F0000AB2BBFC43F5F577ED9E65A5D7E78EB0AA4
-:101F10005DFDCBDB7CBAF29181265DF9E83D2DBAFF
-:101F2000FC98CE75BAFA63F7F975E557746DD695D6
-:101F30004F38D2AACB5FD9DDA6AB7FF599802E5F53
-:101F4000C0F6EAEA1759DFD7E52739FEA6AB7F4D81
-:101F5000EA015DF9B5AEA3BA7269B74C19FA95FEFC
-:101F6000BBB0634ADCFFD4B5F7158A77A55F52DCB6
-:101F70000D2E584F767FAEEF418046E1BB883E0F75
-:101F8000C57D9C78B00FE514DEBB76F27331A514E5
-:101F90003F4A243B8754910BCFE9801D108BDE55BF
-:101FA0004E0EDAC931417B2CF36CC839B9F3D963D1
-:101FB000D764339AC75DD9DEFCEC24F43FB64EA655
-:101FC00077C1996F35CE43BE73F76ED87BC832BDEB
-:101FD000D67A841943ECBFBD512D99A3CEE1BF5FE2
-:101FE0006B3DC1F09DE59E7E45BC4281F52D0BE920
-:101FF000FF01F0178C03196BA903BEC17DE13A07FD
-:10200000E51FAA4BA5FCC3752E4AD7D50DA5F4B183
-:102010003A3795AFAF1B47F927EB34CAFBEB8A2958
-:102020007DAACE43DF37D6CDA6FC33E01763BA19BD
-:10203000FC644C9F057F17CBB780FF8BF917EA7CB8
-:1020400094B6D635D1F797EA5A28BFBD6E1DE57F05
-:102050005BE7A7B4AD6E33A5BFAB6BA5F2F6BA369E
-:10206000CABF5E17A07CA06E0FE577D475527E576D
-:10207000DD3ECAEFAEEBA2744FDD114ADFAAEBA63C
-:10208000F2B7EBCE50FE9888B72ECF5674F7956412
-:102090005EBEC720EDBF6968BF23718C337DA9B3D5
-:1020A000DFC3ECE8707CC87182EF270C7EAA21C4E4
-:1020B0007FF26573FF4ABEC710FE8E0213F6A97C3D
-:1020C000F754BED75029E65525F8610CD2E750A247
-:1020D000CFB72FC65F90FEA02DC9DB42F49965F003
-:1020E000913F6CE3F7892F4FF23E983D06F70B2B9B
-:1020F00076D3780E37ED1B96580249B372E99D707E
-:102100008ACBF5355E8D38F7DD67F9EB4733D19E25
-:102110002EFE41A577B6DE35D967A3FFFF8CC0C37D
-:1021200033D9065DBA2DC9BB09E7F3ADBDF6360359
-:10213000CCFFDBAB963E73474ED04FBE1E5D4DF0DD
-:102140006FA6339789CE1532EDCD1CB49BC0B0C2BB
-:10215000FC2CE6A3745CA2F705ECE76630B831EF1F
-:102160001D6FC98EB4AEF079BD2AF0F56AB64197FD
-:102170001E48F2B621FCBEB56B34AF77AFB86630FF
-:10218000AE4BCEABBF7877641AEB7E12E7F7ED6B00
-:102190005F1D560604E12FFD71BAD78F726CA9221C
-:1021A000DEB5EBF58E009597DEA9907D3607FC191C
-:1021B000DC1F92EF069CAA35D13BF2F8CE00EE9FD1
-:1021C0009DAAFDCC86E40CF518EE6F34E0011D28C5
-:1021D0006FF829BF4F5F8AEF628CC2770BACBCDF10
-:1021E000BB15A2BBA4E41C7EFF19EC3DF29F12BB01
-:1021F000E99E1ED0C99F116E0BAF50E9DEF9BB06F8
-:10220000FF6085F6932BCC0ACCAF2A11E8A37FDFC1
-:1022100074B044DC1790DF81BE3E41B87DF9EAD846
-:10222000A1147F7FFD0A17C2ABC1C0EF0FF9DE52C8
-:10223000F9EF2E0911AD4E184E71466674BB315E32
-:102240005422EE9B74A86C45A4F7C4957E9C8EDE48
-:102250004DE5EFE73584EDB3FC53D0D53F05BD9593
-:10226000ECD84BEF082DD9C3DF3B64B95DC342DF27
-:102270009DE959CF8AB72E1918B28E9AB603FC7C05
-:1022800005EB1A167A9E3C5D8C2FE94835DBBD1BA9
-:102290006CA1F3EBA16BD60FE9271EE87A00D1F50C
-:1022A00061DC579C6671C5CD82B40B4084EFFB782E
-:1022B0007FEDA0F341F29CD03CE6A1B40AC800E94E
-:1022C000D8E35B4BEFB92EC45F62C5F778C6CDCDBE
-:1022D000C67C0DEB9E980A70BBA9A9FE4D7C0EEF43
-:1022E0008696B59330BE3AC35FF626A6D3372A87C3
-:1022F000D14F05BE88EF87F110A576151EC9BC65C4
-:102300004BC12ADC7A99A6727CB03F727C00DD68F2
-:10231000AAB3F73A810FD2F83A345A871A5BACE382
-:1023200083D2954C531283E7DD7BF862DCA24F70B9
-:102330004B8D19BB69DFBCE6758B13F1BC9071BD89
-:102340001D8C67487DCD88CE17B16837D63B26E80F
-:10235000FA581623BA3EA630BAA72EED4896ED4D90
-:102360001D3520A8778F19FC79B103482FBB71BDAB
-:10237000BB536F70611C6C51A295DE3F3D16EFCFD1
-:102380000E7BE783DE239271AC074C3CAE143E2FEC
-:1023900065DC6EFE7B1866E6C3FD09FCFDE33CE4EC
-:1023A000677C3747A177A0BB90EF4D851E57A4FEF1
-:1023B0001B45BF7BBEE7FEAE0FD683F71B7B8DE3CD
-:1023C00010E344F371A4FEE8F9BDE564A61B6F7A3F
-:1023D0003FCECFEFDA359A7FBD219EE44D9AD5EB03
-:1023E000417CC9B88EF403F7E47C3E90FCF5EF1A0B
-:1023F00032D13EA77708D0FEBE8ACBA5774D2E7A84
-:1024000077F7DD821C8ADF4B797BFD381EFFBA5ED1
-:10241000C6BBF2C3E25D61F116961F39FEC598DBBB
-:1024200084E35EC23E92F0A138CB8E7C23E15DFE58
-:10243000BED20EE17F9E2A4ECC453AFF5D3F5577D6
-:10244000AE40A66B447CB439ECBDEB35B9CB1C78FF
-:102450001EC0F23CDFEFBDBF307A7EE839F42707BB
-:10246000F1F329EEC1059B114EC36CFE4252CB9A8B
-:10247000D185F356C43A2E73009C0D686F7A449C44
-:10248000D36DE5F1A589A497257E2F542F3F6BF4DA
-:10249000AF8CC67526F2DF19B0AFB392DC545BB5D2
-:1024A000001E89FE72D08C5548B7CCE8198AE374B7
-:1024B000E445331BD4FFB6C34CF1A7D70DE5BFC627
-:1024C000F3EADD7FB3303CDFD06ACF30A271DBFAB4
-:1024D0003DFF5DAB56FB84C9FCDD491683EF638E7F
-:1024E00074B0A75F44E4887B61AD0ADBC31F69D584
-:1024F00062F07DB756033B7D35CCEB25DBA8072F7B
-:102500002712F3A8B8CE67077AD7E13CF2582DE539
-:10251000EF377BE66F8071EF775A892E0A077A1EB4
-:10252000E7F364ABA6C2FCAE2A52E8F7D65689DFC1
-:1025300077B0BBA375EFEC7ACE0C263DF14C3FAEE5
-:10254000571B53B54EBCD0D127DC1CC66EDDFB58E3
-:102550002C93E272128EA1F872E4E9F0E53585E27F
-:10256000ABE7776B24BEF8EFD65C28BEEAFA319A67
-:10257000AFA4475FA16BEDC45CAEBF1AA89623174A
-:10258000FBDF119D312CF47701243D4AFA8C4097F2
-:102590004B77A2DCCD323830FE79CFD468D263924B
-:1025A0004E257D7E9CD343A743FA631CDEE69984C7
-:1025B000B2229C4E31BE154A8FA57DD22D7384F276
-:1025C000E534B013E29C68D71CD9D81A428FA5B560
-:1025D0005F19B99C387B75745E301E372D5F619F23
-:1025E00086E215FEFB74A8581FD93546F2A724FCD5
-:1025F0002E14CEA61BEB87A29DB61AEF0D02BC9A35
-:1026000014B79602FD196B0FDC81DF57897BBBBEC7
-:1026100061666E3F09FE90FD7D39A8F038D2A37D3A
-:10262000EC89984AA8F76DB2C185C059E52A7F9117
-:10263000F86D5F0CBD37119BD039FF69E29F210C0B
-:10264000F7F3BE5DE0ED87FBEAF7029E3EA5FB399E
-:10265000FE14FEEE61570A7F5FD625DEA1F7A6F2D3
-:10266000EF4C94FB297F474E7FE15768A27E17D538
-:10267000BFD7DC628DC67172AC8EA742E8FC6A11CE
-:102680001FFF1FC180237D00800000001F8B0800FA
-:1026900000000000000BED7D0D7854D5B5E83E3309
-:1026A000677E330927C9240CF98133C92484640265
-:1026B000930410446512020D083AFCD520890C8A57
-:1026C000DEA82493426CA3D77733908001EC2DA22F
-:1026D000B568793AD042F1AF3728A5A18D74127E42
-:1026E0002E5A2A83D5165BB581FAACB60582785B83
-:1026F000BC9796BBD6DAE764E64C2680F6BEBEEF02
-:10270000DDF7E65EBBB3CFDE67FFACBDFED7DA8791
-:102710001C59C7580663EC52BB3C3F99B11C59A0E9
-:10272000FAE36D5B7D1FB818DBD016A2327D6E8890
-:10273000F94B19B31605E520F433AF65FE2E1B6384
-:1027400097F1373D5A3EE014199B04ED7D4F311946
-:10275000FAA5BB3C821FFAD9E7C278458C7E97E187
-:10276000BF5B180B8E28877E3B98974D646C9D6CE1
-:102770000D0585A1E3DD925175544C19FA7CB0FD2D
-:1027800006819D3647C7C5DF69751E3D8CFF57BD65
-:10279000BFCB8D35878E6532D6827D65C6AAF3E0C4
-:1027A0000F9CB7D5B8DD04F34E965369DF9FDAABC3
-:1027B0004630F7F0F33DD3060B2F642CD466A67297
-:1027C000479BC48246C6BEDBE6A0FAAE3699CADD98
-:1027D0006D45543EDFE6A1F617DBA650FDFB6D5EAE
-:1027E000AA77B5D550FDE5361FD5F7B6D5527D5F32
-:1027F0009B9FCAEEB6062A7FD4D64CED3D6DAD54F4
-:102800009F6E62CDB49FA2A063019C47E78346AF51
-:102810000CF06954CEF1A0372FDD6367CC52A4636E
-:1028200026E86639B685E17E2C0E9D3704E7B0DEDA
-:10283000B185DD05A5617272A73002F6FF92AD5336
-:102840009800EDE2E34C86E7CF08C106E6616C91A3
-:102850003CD6278E62CCE5F84A551AD46F974B3791
-:102860009B9D8C15CAF36BD7C4D4E5E4F2FBF64804
-:10287000D1FA18F776D10AEDCB421336DB05BE0E3E
-:1028800096C5D8BD72B96F0DE051388F0511EE03B2
-:102890004E636807B4AFC0F31271FD12ADFF66D688
-:1028A000EED0C1FAC7C8C6722650FF30B35F7BFFB7
-:1028B0004659A6E7F1EF5DA99F6EE235F563FA2B65
-:1028C0008C87EDC215C6310B0BCD1158FB2603FCCE
-:1028D0000F3C0F66D8423B015E9D06B6CC0770EFF9
-:1028E000B4F0F28893D3DFB3CEAAF14EA0A3F14E99
-:1028F0007EAE9D96A05485F397EA3C3B109D5B9D70
-:102900003FCF83F9BEFABAC836CA51FCEC403C80CE
-:10291000F70AC6247B711EF68FE65001CCF3A53171
-:102920002F75A441BDE03B1E8F1EFA6F621E2BE285
-:1029300049F0511DDB09F51726E6A7CD87EE259353
-:102940007E90E6077C398D7C00C609315683F8B647
-:1029500066DD3D63FAA1FCD309FF1809D6F9B83248
-:10296000CF7643A499CE73928DE1BE19DB9CA473FC
-:10297000407F071CD2758CE946F1D268906EC77E05
-:10298000C675461684F518FF729DD907E3B55F3406
-:10299000D5201F612C92A49B02CF2D7E29159E6FFE
-:1029A0000EEA882FB4CBB69000E36EB2951F95A1C6
-:1029B0001E94749E0284A35B4770ECB07D39A4879B
-:1029C000F144614D03CB87F54A2F9B9DF03CE4D643
-:1029D0004948E721EF821AAC07FDA2A74056180428
-:1029E000B6FBD3421B715C36F0D309D85EC73C08F6
-:1029F000877599FFDE9704F5F6C59247CF7BCBE24A
-:102A000064C646E15F3065BBA17F6D12AE6309EF1E
-:102A10000F7F79E6031DA698F8F97DA377B6945742
-:102A20008ACFC5603FE74BC2652044D1E0317BA02F
-:102A30007DBCADBCC60BA5985C6E96619F1D52B95E
-:102A40007939ED9FD918CC93CE387F6A97743521A8
-:102A5000A5FD2EA477911D724D2652A2F60EDB968F
-:102A60005E84877837634E19D707F3A97C0FE0613E
-:102A7000CEBFE1A80CFBE8BC278DF6210A1EAAB345
-:102A8000BB455A77966C0DB3F1708EC6794719F035
-:102A90008F2CF3FD73B13EAA41FCA03F864F8FF40B
-:102AA0006BEB19B5DA7A3A83BA393AEF6F14F91148
-:102AB0000FB778788C923A4EE0FA47F9457A18BF0A
-:102AC000FEA7A427522B19AED346EBCCB4DD59098F
-:102AD0001082A17D6B10FFFED6758E9716989D30E3
-:102AE000FF78BB0EC1C926B081B538EE2605DF3BA5
-:102AF0009DFC3CA374A557E97224D2E598561D0BA2
-:102B0000C6C81D67D0CA8231F3E577A669EA059B7E
-:102B1000B334FDC76ECDD3B48F0B156BDA4B7697FC
-:102B20006BEAA55DD76BFA4FE8AED2D4CBC2733453
-:102B3000FD2B8E2ED0D427456ED7F4BFEEE49D9AA0
-:102B4000F6A9FDF769DAA77DB44A53BF71E0214DBC
-:102B50007F20E386AE04723255E1571D0E6FC49B91
-:102B6000409EAB2593C481C1F300DE69720066C745
-:102B7000CC97ECB1021247EBA099481F2629759219
-:102B8000EBEDF25AC4E71423E1B388F21CEAAB1E62
-:102B900034864C88FF377964E42F2627E763FB0AE5
-:102BA000BDA39DB0AECA1433C905D1C6FB89B659C1
-:102BB000A4A78CDE0A7CA902EA121B6C4F42FEDC41
-:102BC00016F4B95CD1755BA4CD0CE9B732A586F5D6
-:102BD000DBA2EF8B9297F993713E99EB3F5290FAFB
-:102BE0005964783F665F07743A66433EDE0B7202B3
-:102BF000C6EF4ACE1691FEBAFE525C4D65F2B4594C
-:102C000088EF6512FBCEBF40FF2E811D65A02775A2
-:102C1000E9D885E9B0EF976DE58F83B806D6E8D39C
-:102C200023BF9BCC9AA91CAD63562CB70BFDAB19E7
-:102C3000F473379FA81A09FD9E77F9BDB8EFAF83EB
-:102C40000E81FBFAFA78AE67ADCB9C23A35ED6E982
-:102C5000EC3A9A87EBC900B9828420FA3CA857A8BD
-:102C6000FBBD4F394F31AFB31FE5DFAA54B38CFA28
-:102C70009268DEECFB00E0F58CA1FFB976A877083E
-:102C8000D2CA2EE48B0FDA3C3B19EA8F1C6E72B26B
-:102C9000AE622D8CDBB5C62BA6427BD706E6E9409B
-:102CA000FAB057AE4D85E70539CB7569480FAE359B
-:102CB0006BB1AC73E611FCC6B9B7EBD2A1BD6462CF
-:102CC000652D43D92BC17CE9C3E3933E652BC3FD3E
-:102CD0003097F821E2954E063E034BAF4C83F386C6
-:102CE000792D78DE02950407CB455BC8827517877E
-:102CF0008BC52B8492A06E777905AF1BDFDB4AE78B
-:102D00006B096BF5D82A97FF3EA47FFB5CEDB98A6F
-:102D1000E627687D9B749C2E3A53E563289F3B9D74
-:102D2000AEB47639BA4E95AF3CA0E86BEA7395AF76
-:102D3000FC0ECF2023AADF009E6FD5E5A37EB699B7
-:102D4000217FB23CBC99215E5BA4A0CC500FFFA7B1
-:102D500020E1B9AADFAE5668A63AAFD68CF2FA8265
-:102D6000BD9CF4594BEB2E3AAF78B859FA75CC7B31
-:102D700005B8A6143E4DF21D18B05C00F0E9CBB4C6
-:102D8000356C4FA0F78F50F4850D40C61192573E19
-:102D900033F26B831EF455926FB06190071724468F
-:102DA000F28B7539A9BE3A95D7D5715667948FBC09
-:102DB00092FE6DD96A66FE987D6C8079102EEB2E9E
-:102DC000CDAF41B8329188836DFA8B7BFB46A02F43
-:102DD000D5AE19A1E82B39383794A38D8CEC028F2E
-:102DE0007D6E0DD29DEF621E09DF83CE346AF7043B
-:102DF00099BE99D66D50E592EEF2045AAB6C54E54B
-:102E000030A9B65C6EC1FFF75E1690EFC7C8315EA1
-:102E1000905C57E576C1666DFBD8ADDAFAB8D09014
-:102E2000F7DF42B9BF98FF0D7241DBFEB422BF1736
-:102E3000A3FC86922D3290DC33C38A2E73B91B9586
-:102E400083C01772BBC295C846735A62E421A37D42
-:102E500068E463954B26FCF31D150D788EBE8B60E0
-:102E60007C540CE5CBA34D1CDE7DC6E4D05A78EF34
-:102E700051B08BFCD0753DD8437E20B5AF8B9E5FA3
-:102E8000D6A19D7554EF018C1D3CA7F873F5E4A9FC
-:102E90007AAFEF2DA403C6FA2B7CC97C3E7FCC7C95
-:102EA0007DD694F10CEC965D85FE5F61BF4F6AECB8
-:102EB00013913F98729801E913E767CAFCCC88FA2E
-:102EC000333FEF4D9E379B0FC23A1E396942759CC6
-:102ED000CDD41F3BDA06F555B922F133E9BA95CFC7
-:102EE0005A810F54FD1ADAE19D47647924E9E947D4
-:102EF0000D0CF5F42A058FAB14FBEB9902038DFB47
-:102F000089225FCE3A55BD276845FD172C022BEA72
-:102F1000B325BB81176BCF3389B77B49DF2DED8A92
-:102F20006FF732A4E362055FA06EAB847A9952EF2B
-:102F30006242BA04E738A1B6BF0F4D09F76B87ADFF
-:102F400088877B2C5C7F7B5EC1874C2678C2B0FE75
-:102F5000CCDD364F08FA25EBD99E08ECC373483C0C
-:102F60001D7BEEE37BB475378BA93B711DDAFAA3A9
-:102F700072B3807079B40E7474D8B2352FD9FE61F3
-:102F800009439817227ECDD4DBCAD09E5A55696377
-:102F90000857D3A9B1DF8A20FF38A1672817A424D6
-:102FA000F9B16A785FFA69BA678D1C3DFFE7DB907B
-:102FB0007533F6E4650FEB009EFCF52A6B03EABF60
-:102FC0002FC279A21CF93ED8D9D8DE05E78AF59739
-:102FD000C1CEC6722FD8D9F87C1FD8D958EF063B7E
-:102FE0001BCB1F819D8DCF7BC0CEC6BAA7B072749C
-:102FF0001E9C4FBDCD375340B87A455902BA12A234
-:1030000070661F1661BD5FB80C045227B17E13C0F5
-:10301000F5F81899CED7C47C0CE52BF37BCC8897B8
-:10302000571FC7AB8EE337241A670A8C4376825941
-:1030300042BF481EBC31029E9F79F057BB505ECC08
-:1030400013FC1E5C6FE3A4D346AE3F0F18B1FF36EE
-:103050000BE03FF0A11C850E8255004F94BBAFEBF7
-:103060003DEDD0EBA619A7566780FD5D95E79C2F37
-:103070004E85FAFDA72A4643BD73C7A6F968CFDF80
-:10308000F4BD53AF64030F3E9B378FB73F7EEA42D8
-:103090000EB48F605F9B5F0DED29E95C3E6D1358A8
-:1030A0006DAC7E776B1EC7F340EB169273C0DF19D1
-:1030B000C2A13DD347F2F19C7D206539F40F640C29
-:1030C00064DE7905FE1D687D92E4507BCAEF49FFFE
-:1030D000681F94171E9217EABCAABCF844C13D555C
-:1030E0005EACB2F0EA603F7F3E3D7F5CF1EBB050FA
-:1030F00001D5D32DBCFECF55F271B47B003E64E701
-:103100001E4C29FEC60D6857D6881E13D41FB795CE
-:103110005B50DEFCA3C27F60DC20DAF1C199E6D00F
-:103120004E3C54BB4CF498A68E6F77A1D2C5D29476
-:10313000751CBADE1A463BBFBDDABC03F5C92DB615
-:103140003C1AAF7D8A3188FE15B5BEF6FAEBCDA8E4
-:103150004FA4A6A439B1AEF2A78D80F758C24F8F05
-:10316000E35629DBAD32DBC27AE4E766C31F63F5C1
-:10317000641B8B10FE7874609000BD19F3395E55A6
-:10318000304F2D3E370ACD4144C66DB876DC47B28C
-:1031900091FC0C8C65F375ABFBF066F37DA9FB48E5
-:1031A0003606957D909EB4C5A60BA3BEB705F685E1
-:1031B000E305F264824FFCBEE0E7C371674C51D671
-:1031C0002DDDB017D73153E7EDC0F70E7F566707F7
-:1031D000F462B358B388CFF3C1A2FDD04CA2B3E3DD
-:1031E000F215F40E14E41FC6C8AD9B7E2BD07ED81A
-:1031F000FD463A97CD057CDF4F1B434E46066E6871
-:10320000D482E4E1F1F78521F8EB65484FED695E82
-:103210008EBFD240CA1AC4DFD481CCB5B4AF70C25D
-:10322000F388C7E3F8F3D907FF2972408FF0BDDABE
-:1032300079AAE7A8E241BCFC32E64BEAF93A689F7A
-:10324000DE224E07AA1EC5C0CE491E0ABFF5309E1B
-:103250005C18AD1B1D3ED28F0D764F11FA6FDBFF50
-:10326000AA6F48E4BFFD5081D39A142BE9CDED2914
-:103270005C6FEE4D99A3B177AAC1FE11003FF4E94E
-:10328000AC0BE9483FE276F27FE947A28684EB8AFD
-:10329000D34747CCE5FAA804FA688279D552447D31
-:1032A00034819E3AA88FA6CDE1FA688A91F4D16D57
-:1032B000C9C6DAED09F8CD813CAE5FF7E23E12D81F
-:1032C0007B60E7911F52B5F38C929FEC35759F0799
-:1032D000147C57FB9BA466867E31BDD123A3BEA977
-:1032E000B772FDD104DB2C8A91DFEAFCFBF30CF40E
-:1032F000FEB70BB91EAF3373FDE4A6E3427322B8E9
-:10330000FF5981FB7078F737E00DF185729BD18B07
-:10331000FA41B9CD5185FAC170EF81A919FC282D68
-:10332000CA573C7F9DAC27F9237A1C88675D86FECF
-:10333000578EA31D77D846F246D59BC14EF57AE04D
-:10334000E53DFF0114A81B6A9F82DD24E5C3787D5B
-:10335000AB3227F2F140BF2B1DAA4FC6FB0106E995
-:103360003C659793BF171A85EF09ABA68C447C8AFE
-:10337000A773B5CC75BC9EBB02D6953BEA2895EAEF
-:10338000F3FFC9F4E4578BEF3F365F853F97C7E300
-:1033900060B2117A92C36371DD675ADECCF4C05219
-:1033A0009AC4F3248F3F699E32E21199F3D9DD2844
-:1033B0005FBE22129FCDB9B737352DE67C9F6EEBED
-:1033C000CE155D182F88E456BBC80EF0265AEF4282
-:1033D00075FEF018E2CB06E5FC657B64F65880B715
-:1033E0006CD379D0150D425743FF95626AB504F34B
-:1033F000E7B6318F0DEA4E26911F2BF7B29EF02CC7
-:10340000F7E012C2DF31F60121E88E990759704CBE
-:103410003CE4D3E66AA2CBDC9183F61BC50D3EB536
-:1034200087E7235D7FFA045F51EE77B4ED205BC937
-:10343000CF7C4F8B358426E09887251DD6739F154A
-:10344000588E13D771D0F908FA697E98447E1AFD18
-:103450005617F9599E15FCD3F2812ECE84E4AFA203
-:103460007D4B3FE8D7F835EB8E8D24BF22B3497EE4
-:103470003DA0633B13F8916ECFE7F6DCD27C4E5F44
-:10348000B98E3772575460798CCEFB5AE9A813F97C
-:10349000358CF3C888CD14E70A56B122B4FB3A0D37
-:1034A000805709E8F45FF3957899CA8715F859D0E1
-:1034B0004A817DE80545BFDBFDFCF3CF67A2BC6612
-:1034C000A8DC0DD29B3A4E525117352679BC0CFD23
-:1034D0000D82E4E5FC550A3A8218D7F98B3E215E4D
-:1034E0003FA99CDF1AE77A07F6AF76791C4807BD3B
-:1034F000CEC98E3B017E369B919962F8AF8A2787B1
-:10350000922793FEA18EB32A39EF8A76B611F8B0CE
-:103510007C05F96C447F37EA317D53CD32AC77BD01
-:10352000AD3C827AD67A9BBD9CFCE636E017317EB4
-:10353000249BED08E1A1CDC3FD6B36E4BBE8475207
-:10354000F6DFEB3C42FB57FBAD52F88FCD13E67133
-:1035500047B062B09F45F405D1BEB0D819D99316D3
-:1035600033A7A724380E730C1F51E7BD3F9FDB69BB
-:10357000EB73CA2395B43E113D016CBDA3DC4172CF
-:1035800010E18C7AE8A8413D94FC25CF297056C7FC
-:1035900069EFE5FBF4B53ABCD5E9687FFA9E45BE14
-:1035A000B0DE76A73988F22079E215C77B255FD097
-:1035B000F87BA2E3B5CE50C67B0EC7D327974B3816
-:1035C0009E01F94402FC0B2BEBFAA2FE3080A844CA
-:1035D000F61AE37A1560BC2391FEA09666C5AF3556
-:1035E000F43DCE279D8ADD027CF218AEBF31E7F4B0
-:1035F000914AEAC5ED95B4D9629108E7F5099CA016
-:103600005E88DAEFF17A4CA57E80E4992A8754B976
-:10361000F434EA31C6283DA97E97EC061FC96BC178
-:10362000EE23BC01BD4646BAD163BC3701DC24178A
-:10363000879B903245467AA9BED49F4D723EF9A32E
-:103640006C16E33F53F9E1A1CF7659B0FDD386AABA
-:103650002BEA2B6A3C78B83870CA43BFFF4AACBE2D
-:10366000325C5CF86AF1E0BE1423F9DD9E11B47C93
-:10367000C9EAE2FCC8E052FD27FEBFE0393C23F86E
-:103680003CA42F2A7E947D857EE642BF57A79105F4
-:10369000E13C0F7C36D981F871ADF055FDE6598AD1
-:1036A0001E9565DB25209D66358404F47B673774A1
-:1036B00009DE2BF47B07E93923DADFA08C3F5D1CA0
-:1036C000D0A3BC9AAED071F6459115C5E87F6FE5E1
-:1036D000733DCAA0E8ED297DCF5970BC3E9DAFB3C4
-:1036E00010E5438A4EDE1943EF867BCBCD5531F092
-:1036F00069C7784E82F32B770DEA5B6417A9F2D67F
-:10370000A0CA09BBA8911381248EB7AABE13B89E84
-:10371000DB4182E02F41B89EBBFEF7B7E016CF0930
-:103720006183DD79F578C6A05EA30B2D57ED17A454
-:10373000972E83DCDD4FFA558A07FD00AA5E55F609
-:103740003D211FFB79042FD1C924E6A7F23AC6F523
-:1037500040D0AF6E7091BE075B89397786AE88CC5A
-:10376000ABEFAF00FDE018271023E44FFDFA2581F1
-:10377000F87B3CDCDA06E13618CFD3F845B315798F
-:1037800097ADB4CBE81775627C4AEBB7AC38AAADFD
-:103790004F8A68EBD79D8CF38306BD6FBB3279FCF3
-:1037A0001F07DD06F4867C628512B7CC09862A25C0
-:1037B000586F2EEBA2F86076439A06DE37E995BC87
-:1037C00009E61598BA4EF8658BF33EC6F75B5C8345
-:1037D000FE3BD2BFEE51DAFFA17AC5573BD096DE51
-:1037E0006C20FFA819264778FDC3EC0533F1BC8790
-:1037F000F8579BB57ED5ECD87680C33DDB0C9A7626
-:103800009FB78CEC82858ADF7670BFB88E0CBEDFE6
-:10381000ECF2A1F35F7D5EF82F6DE8FCEAB84F0390
-:103820001F42FECA2EC1B94E46B831F440B05C31D9
-:103830002C609C3AAB9979514FCE6E61DE44FEFE0E
-:103840005D0ABCE2E1CC82D3097E33946759363DF0
-:10385000D9ED592D3AD20FB3804F207FB86525900E
-:1038600011D4B357CAA45FDEDAA063281FD8A536E7
-:10387000CDFBB05CF27FAAE7FE348E87FA65230B9E
-:10388000E9703FCDC54467B4AEBC283E00BC4E7362
-:103890007899095EB74E3168FC9CB9E8D78C818B6A
-:1038A0008A07D971CFBFE492347401726E978BF09E
-:1038B00084CBBF02947FB0A433534FEEEA82F5DD90
-:1038C000B496D17E0752AD219E0F31183FD05F1EB6
-:1038D0000B7CCB3CA308FD2C9B24AB0EF3160EA453
-:1038E000F67F9BA532D60D6A71750E633FB10E94BB
-:1038F00008503FE46AD8D27923B45B065E40E7AF54
-:10390000CD16585013534F49695F5083873685C988
-:1039100022C0C78A33C03EADD29CDD7A98DFEAB6BA
-:103920009153D2CA06E994F6D371BDFC28E67D74A2
-:1039300014E8487F62B1EDB08FB20249A1036F1164
-:10394000F18F1A1EC78F1D5FB45F61FC3930FEC452
-:10395000CF31BE99AF3F131F81DCC9C4F5A3DF1A75
-:10396000C7C7F345E751ECFCCA78220B6EC7780B4A
-:10397000CC6713F87C12E69564326D1EC1E07C12B0
-:10398000CC57FA77D84FEDD0F3305CE93C6EFF7C32
-:10399000E7D1A1F3D27A83E36D64173168D64D463F
-:1039A000FB83CF6711D921B19CC3B5637214AEA05C
-:1039B00007D2B8D07DCD6505CE0684B36424380F18
-:1039C00007B73E89E7356D90ACA135CEFF03E7E53B
-:1039D000E0E7153B1FEA93D73CDFED309FFDDAE7C8
-:1039E00043F822FD0CC217CE646DE6B5C317561519
-:1039F000BC16F8F6C1B8BA18B846F3879E92D02E16
-:103A0000B0187C660FF0DF9B0A5249DEBAED0BCC92
-:103A1000944F90B1C08C797AEBDCB61ACCE75BE7B7
-:103A20005A6436C4C8E975EE3A6A87FE94F7E40E24
-:103A30005BD16DC14A5984FC021B6EA8762C47FCF1
-:103A400069E679546A5E912A0F9912AFA47DC18B01
-:103A5000236EDC3BD007FD37344FA4BCB111A9FF66
-:103A60004EF9529B1A3C1E6CFFB685C71D9F54E24F
-:103A70004E88A8E4571B7FFD7730FE5A5EB04AA0FF
-:103A800078E3CA2BC71BCBCF47AA30EF8A2DE77943
-:103A9000558E3A314E1E6AE97613C295E73F85048A
-:103AA0000E5FCD782D05193C1EEDDAC1D0EE7B05F9
-:103AB000C6D26BE94B877948F1F4281ABD5225EA42
-:103AC000EBAB74B48E6C0CED83882B2F9DEB580EF2
-:103AD000CF73EE163D023C1FE97E98F29140DB2742
-:103AE0007DC3ED3E5685F521FB5CA1DD47FCBEE2C2
-:103AF000D70D828BD6AD9E57F9794F12DA57E5056F
-:103B00000B285F8C7E2ABDEBE3F6938E76B1CE6BED
-:103B1000198F7641CCBE98A69F62BFFDD7D6EF44E1
-:103B20006442BD303E1EF64F3E5AA78979CC467A94
-:103B3000AF8EEC4835CE9685B483E73E9AF1384592
-:103B4000FCFB93F9FBCCC1E36E262B98A4407FC20B
-:103B50007D56F2679A4C5087F3118CCC3C0A9E3FFD
-:103B6000ADF803D7084CC47A74BE30C3F9DA05DF68
-:103B7000668F134B6E4719527D946F8861DB587BBB
-:103B8000B40FF338A07DD5BDCE91E8CF1B01041151
-:103B9000417B5A8953A9FE9394FCFEA528BF5F2C54
-:103BA000F8688119E5333A9CAE676CFFCED35B822F
-:103BB0003951BA345DCC62728C5D63129B299FC30C
-:103BC0007471B4C6CF1256EC31B5EEB58BD5385FF3
-:103BD00004ED05CC5F625207BE5709409163FDA614
-:103BE000171D9A71A2E3E768E60D835D1D1B171888
-:103BF0007EFC242617C58E9F37CCF88571E34B09D0
-:103C0000C78F8E9BAE19779DC8F945D06E0D25F2F2
-:103C1000F39D2DA87A1B4979B87CB33305DC0F08D6
-:103C2000FC58A4389482378F389A29FF4C6FE5F1FD
-:103C30005283123F3998DCC0F32472B4F967554CB3
-:103C400012B17D5DCAACA302B457D9B47AFAF44B71
-:103C5000A7F5C877A68B5A3DDDCB9A093F6F62DA8C
-:103C6000E7861C2D1FD8A8D0872E796284F2D43223
-:103C70006C9477309C5FE1DD3646F95386245F33E0
-:103C8000CA3863E1A5B4750EA88FE0F8652F4C5DC6
-:103C9000887EA277153C5E07748F70AC5B3572BB73
-:103CA0003E66DC3A63B800E5489D8EE7EBD30FE64D
-:103CB0007F37238BFCACF1F352C66F8CDFABBE5960
-:103CC000F0B962F6F1AE421783F3ADCEDE8E7AEC38
-:103CD000E07CA6F0249A6F30EF47992FF38BCDF755
-:103CE0009E42CFEA7CF55FD5EEAFDE18A1FDD5EBA5
-:103CF0009892E7CFE77B0FF7E7FC02F329F95B83A4
-:103D0000F37D4DBBBF7A5384F6573F684F2AF36566
-:103D10007EB1F94CC6668ACF3C26F0739DBB6BD44E
-:103D2000E3E8A7BF3077958CF8A6DA67B7E00B8099
-:103D300067B728F94DB7E618496F50C7DDDD3685FE
-:103D4000798DDC9F8365D10D02E5FB8F9B22783155
-:103D50003EB60DE8DE5B88FE2A89DA436D0E2A77CF
-:103D6000B4C9547E17EC412FF9AD3C54FF1F85DCDC
-:103D7000CE7F6C94B46405EA0B95569EEF7CC334F9
-:103D8000D044A3F61618607D16CC2BFC322BDB0832
-:103D9000B5C2AD1C1EF6EACC109E93B5EC50A40D36
-:103DA000EAA6A97A19F3B84D4EE64BE48F692DE4E3
-:103DB0007E9E47D4FCF81B051E7F077DA412F6BF2C
-:103DC0004C0135D3CF1550AFBAF56BA9A48FD42DC4
-:103DD000EA4F96601D7708656FBB001EBF51F491D6
-:103DE00065A3391DC7DB9376942C13317F4F1F0ACF
-:103DF000C19F0B9317923DBA70316369F0FEADF825
-:103E00001EC895E38A3EF346BF89A1BD16ACE67194
-:103E1000E73B1ED6DA918F59C212EA718F95D919F4
-:103E20009E475D8BB6FD11258EB030CEAEBC352ED3
-:103E3000AF06B44C9E1F827B9ECAD80385DABC9A1B
-:103E40008A4299F3B91C3B2555A7CD768DC078A43D
-:103E5000C998F81E8E3ADE33AA5CB67B090E6A1E3C
-:103E60001AD3BF5846EF2BF3A9EF3D2DBC38EA4AD1
-:103E7000FE4ED0DB3EEC2FE2F219F5EB8D71EBBC80
-:103E80003037EF1BD52C11DE0E88E85750D7FFBF17
-:103E90000B5FABD1A70178747CC6A713290EC37240
-:103EA00068DFB7A8F8A3E4572D1CAC8B4C8CC9AFC6
-:103EB000638E01379EF75B3726793612FE29FA4367
-:103EC000F81DDDE5A4CF3FDEE03A1CDE5CEE8FABF3
-:103ED00096283F48196F3838C7E73FA87E1BFAC5B8
-:103EE000E41FB66FE7F98F59F6AA8FF19E143E3F93
-:103EF000ADC12BED7DA8F6DEE704B42FBE8DF7BB78
-:103F0000C4E87CE8BF0D92FEAABDA715BF2EF5FE42
-:103F10008DBA9E76232B227B5407FC01E69B67EB30
-:103F2000170519FDF10322C5CBC7723F11E608F34F
-:103F30007B2F5CCFD367EB783EC71899EB7DAE81C2
-:103F4000D1B1F1A28F0AB95C9F97F4668B0CF2EFA6
-:103F5000FDC2C042CC579A37E2CD1627D44F153652
-:103F60002FC47CA679D96F7EEA049DEDB7855FE109
-:103F7000F592373FCD83FAFF2A5CC5EBD31801E5F4
-:103F80007785AB17225FFDA85052FC97911C9C6F60
-:103F90009EC0F1E58B967A932E613CFF7CA1EA4F9F
-:103FA00064069CC7D7F3AF27911FF954FFAB571B8B
-:103FB0008764D89489F786949F3D85F49939F837BA
-:103FC000C0F36631DC8BEFEBCC6182EB58CCA329DC
-:103FD000221478E2F215F225E2F14800746D457D75
-:103FE0005996581DE8C7EDADCC6FC98FC173E65522
-:103FF000F09CE7F5A8EB51E71FB22E3852312D7631
-:104000005DDB681C755DE7CA4C41BC5FA6C655D533
-:10401000759D13069E4167C49C929D8BF15CCF25D4
-:104020000F8C16A0FEFCD8B7E99CCF650C3C23781A
-:1040300062EA067E8E23C73E4A7A4F8BE01D391610
-:10404000F9A5D146F7D83A153D6F53863FC8B87EDB
-:104050004FF98FC15C7E3FA07AA2E08D8DFB3BC7FC
-:10406000F2B8494829679A36379F007C0CEC15D87E
-:104070001AE81FB874C188F6F8BC9E5346B4BB9BBF
-:10408000F69E32A25DDD847518A7699B91F8553CB8
-:10409000BC778ED56BE2EBAA3D7138B7709D1DD60B
-:1040A000D3B442F060CAECAAFDA933B1BE6A39EEBE
-:1040B00092B1DB6FD83313D1A5DED7BB0ECB65AC85
-:1040C000FF30DE9F5BE2D7EAF94B1BB47A797DB310
-:1040D000569F5EB6194E07E4D7B2D66CCD7B0C3531
-:1040E0006458CF12E53C97381E8DE8C7633DE65E05
-:1040F0008E40644DFE9DA57C07506AFD16F37A0440
-:10410000A2E3A65A33F95F0FE7F27CFAC04A3DE515
-:104110000905101DB0DE2C28FE2C2FF147557ECF4F
-:10412000EC3E7F241BDF5F692038B0A037827EFD24
-:104130005A059F96D5D67C8C78562BDFC7E5F89824
-:104140005D06F2AFF8B93E2E2BFEEFBAEEC7AAD34A
-:1041500050FF6C11C8BFB1B441ABAFD7E31FA8BFCC
-:10416000B50AA1B013E1A46D5FD6AAADDF355691B3
-:104170006325AC04E9A461AC2012DD28F53FE6FE1E
-:10418000E28D304CF490E0BB7F2C1CD04A63783C2D
-:10419000CAB587043FD5D57678DEC4E50E97F73AE1
-:1041A000A028E2BB06EE5708360A848F4B87C8FF6B
-:1041B00018FD403FB4FECC582EDFDA2DBE16B29764
-:1041C0005E1524D447AA45AF98E68EDAB3F1F8F825
-:1041D000AC82DF6FB07E37AEAB10810EF02F5C3853
-:1041E0002284FEB0C29F2CA77CC7C20AC1A3237A37
-:1041F000D6B1D6722C45E20FA86F5AA02CD477D531
-:1042000012BF9E6094783EA183C5F201EF734CC04B
-:10421000BC3E5C3ACE7B73CED1CFF01C6FD9FAE8AE
-:1042200079E477AE7C6FF963B0BE4D163EFFA6FD14
-:1042300002E9AF4DEE23C41747029AE0BC4D0E854C
-:104240003F76037F54F70FE73D12F9155E1099EBA7
-:10425000A67947A9F10135DF365CA5BB0CE73752DB
-:10426000997767A94CFBCEBCAF4BC07DE7B2E01A93
-:10427000F413FDF3584670544BD58FBF381AC776E8
-:10428000E279363AFA8DA47F2B71EC04FD4A12F6DE
-:10429000F3328D1F61A6FE520AC69B57BD9A7FC599
-:1042A0007C0BBD59A7A1578364D5D0F5CD455A3AAB
-:1042B0009FE7D1D2F7AD53F235EDF3BD259AF685E0
-:1042C00035159AFA62DF344DFFDB6A6768ED7DC70A
-:1042D0001C4D7F8BBC40534F2ABA5DD33FD973A787
-:1042E00096DFD8BB28AFC0680EF6FB010E9D80ABF1
-:1042F00053D2A2FCBA24C58C49C7CC5A61B161D94A
-:1043000059660AE3B97566F138ABE9B5071C6184F3
-:10431000FA8817CD9550BE2084AA305E6456ECBC56
-:10432000E28799869F8F2DE178AE96EF8FF57F5CBF
-:1043300004A57BB79CCDF3A723C5783E66742022E5
-:104340001EEF3393DE31214EFFFD5E69E56F51AE06
-:10435000B81FF6CE26BF543793F0FEEC0E23CF7372
-:104360000AEEE3F9B4EEEE7E9D3786DE02455CDEB2
-:104370007FD35745794B4D3D20CD10BFB79E36A218
-:10438000DFAEA9A73705E5C678DF6923EAD7D1E70D
-:104390008A3C1107AC18BFFC97AEC4F969638A8CDC
-:1043A00034FE1185DFD63FC0F92D20DC5CB48F547C
-:1043B000FE59BF87EFAF7EB191E85BE5A3C03F3503
-:1043C000F1B078BEBCF486D03AA45DE0A31AFB65D8
-:1043D000D9A2591FA33DC45898F418E0A3DAF69C5B
-:1043E000F544DFCBE2EC9BE422E0A7A8479430F74A
-:1043F00065A097933E5DC27DB94BF8F7024EFA6710
-:1044000010BCBF097043BBF19B43E0C4E17735F8B2
-:10441000BCA4F813D5738AEF5756C2F9E84BC3F022
-:10442000CB078A78FB0E21528ECC2CE0B3129E2E45
-:10443000359B1763FEC191DC3FADC77842FD0F0489
-:10444000B465D9AF7B5FCBC47C04E39EC399982746
-:1044500011E83A9CC9004E2B0DF21AD48B010F3C87
-:104460006BE05C9ABAC3B4FEC6AE8A5E7CDED82D21
-:1044700078901506F69E9F45FB64FDEB518FDF316A
-:10448000CCBAA615717D785691CCF398FD3027CA29
-:10449000D9BD26B263EBF7001FC275ED17E85EC603
-:1044A0008E0DE6DA44FAC9648437C0E9D00623C326
-:1044B00038CA4A781FF77124F788D18C78B347201F
-:1044C0009B30D0756231FAE3032D0686715B757DF2
-:1044D000677223EFE3FEDF596160788FB07D058F4F
-:1044E000C7BED3A2A771F4771BA8BEE45E9E377C3B
-:1044F00070C56FD767C3B8EFAC1428DF7EC6DDFF89
-:104500007604EB4BEEE57A503CFE0EE26B1C7E2E01
-:10451000F16BF16E089E367C313CBD338AA7E351C6
-:10452000CEC2B9CF1C89F8F320A37B8CB5970E1AA5
-:1045300046C27AF3D64B1E0CED96EA43EB32912F2E
-:104540001CE4ED652BB70B9CBFC874BF3DBBD3C843
-:10455000D06E7C4039AF0794F392D98080F96E4CCD
-:104560008CE4E1FA9C4A7ED7CB0656BB07FD482275
-:10457000E72FA53F746C8FF523B914BEA2F2BD12CC
-:10458000B0F7F7901FBA2B0BEF9DBF64E0FEB1D1DF
-:10459000CA7805F903B3E643F9CD22CE07DB94755B
-:1045A000A875AF82FFCCBE83E03BCFCCE13EA73500
-:1045B0005C87FBB847F4AF2B82F6B9A37FB1925169
-:1045C0007EE4EB6E3FF9B98A49AE0594F33838F5CD
-:1045D00077DB56631EDE382B9DE3FCBEA72278AE48
-:1045E0004D2E91F20F2D051347FAAFE047085C946A
-:1045F00035F7F89A7ACECFF226A0EB69CA7A4B95B6
-:10460000FB7AAC87FB0F801F8B53CAA3FDD4FDAB95
-:104610007E0F4BC177E99C567F8595F17BFC8FD14E
-:10462000FE97AE3C21E03D95DB0C5E830DE0FC8BFC
-:10463000116C31DAC1AFB731BAB7760CEFAF012BDD
-:1046400079A34DA27A44B9C7F6669B4CE56D46DF67
-:104650006E84CFE243CD0508AF83B94FFAF0BB0CAF
-:10466000E78E29FA2C93F8BD4605F72EF4E8991940
-:10467000DA2FEC1542E43451D67FC7C52CE6077E0D
-:10468000F22BE5BE5C63EBCF89CF791ACECF423BEC
-:10469000A36CE5A9F5580FB4FEDB2CD41BDE07395B
-:1046A00081F815E8169803C6A9BB9846EF37769FA0
-:1046B00030A23DFF926E6016C23F7840A07B5681CB
-:1046C000E6F3C43FB729FE958F8A781C31D053A6F4
-:1046D000A3F3F41673FB4439FFDEE27F4F41FE651E
-:1046E0006E958F4FC3733CAAA773DC583590222573
-:1046F000389793302EE68FFC4AC9D38B6FAF3506BF
-:10470000C92F5BABE06D7CFB070A3E02840D4A9E1D
-:104710001213603D750A7ED5E3F761D250CF17C200
-:1047200056A0DBFA9E19E4DFA86FBEF2F75E86C3DF
-:10473000B76B2D9B18F76FA875B4BF62F3B8D0FEA6
-:10474000D2DE4B0FD23E4CB9AE91FE2BE87781FE04
-:104750002C8A9F3475328A97345E2CA6F2ECFE4781
-:10476000E81E94D93AF024CA0556A823BDBE31A844
-:10477000D56F8E17733A385ECCE9F95211D8276697
-:1047800036689F801D7219F112EC90943EA6B14FCD
-:10479000E29F937D6256FC86A02EF95F4EB0EEB785
-:1047A0008AABC4711948579B09BF19E037E255FC21
-:1047B0003E478CE3EB52E97949DFC746D47703DD06
-:1047C00089E9F937C5952370DC0DC3E4E5BD5DCCFF
-:1047D000F95DE35646F00A6C4D23389D615B7D55CB
-:1047E000809767601D784FFD9CCF97940AEF9FF3E9
-:1047F000FB92303EA7D27FD3562BBDB7C1B5201D4B
-:10480000BFABE11AC7BFEB73B67B8619E17CC75615
-:104810004E77EA7CEF8797A423FD4C320C18D13FEA
-:1048200099D3732A05F5BA49FB17A623FD0DB74E98
-:10483000BB721E8DAD598BE91E10FCF440F7F72BAF
-:10484000722CB0366C44F8DFDFCA087F7BF7FDBA04
-:1048500009E9F76C4F928472F2CCAB4941E4F7E777
-:104860000E98423A186AA5F23DA43386FE5B487F53
-:10487000DCAFA77C85C0813F3C89F418D867A27B58
-:1048800035F7F73C721EE5DCCA9ED91F8B58BEF87F
-:10489000F7A587C6D6D18B63F38EFFD0B63B0BF955
-:1048A000E75991F389FBBB5F217DF6FE4B17C66389
-:1048B000FEE09957FF6332F2B3C04F2E4C463E16CE
-:1048C000F8F185C9D81EF861527322FD646609FFAC
-:1048D000CE862A1F9D6F891A3FCB39053F9C1D9BB1
-:1048E0006BF0BB05934E2CA23880DA3EA940E7C39B
-:1048F000FE93DEAE4EBF3BE6BD8E8848F912134FE5
-:104900005427AD88C1CB0F8A0DAA9FEEDAFC234A4B
-:104910001E82EA1FD91011F93DBB067D08F37B9773
-:104920004678FC3DDE6FC298EFE6523CEF7B333CAD
-:10493000F8BD1EBCA78E7191730F1684E89E7AD0C5
-:104940007CD815A3072D89E8C226F483F498C2A861
-:104950000F2D8988A74C317E91F7A597D7A11ABF53
-:10496000C4AFF563C4FB41E0972CC6C44FEA5BC2F9
-:1049700006554ECD83F97FB18E4918B719E21FA9AC
-:10498000FD12F961E2FD2472E40933BE27BBF8F79A
-:1049900075543D13CF6B6F027AB72974A2D2514779
-:1049A0004447E7D011A932BBA03428ED7B416C0607
-:1049B000312FA867E14EB4D33B2EDD9684F0EA7820
-:1049C0006B01C3EF479C93AACC05F8DEA52F99177E
-:1049D000BBA3F831847F8CE37265501F1846CE1D4F
-:1049E00051F8D6DF4BDEF58DFBEF21EFC0AE7E6DCB
-:1049F0001CB7AB9772BF07B7ABE3E584CA7FD5712D
-:104A00003F53E03D94FF7E4CFA0BD8BFC47F3F1B61
-:104A100027F3EF34F4CC4F27BBF8AD45E9B26DE88E
-:104A2000F8F9A24797E61E3ABEAAAF0582DEC36632
-:104A3000B463BC3CFF34B048A0EF48057C02E9D920
-:104A4000813A4308DBD5F54416F1B8E0628F40DFC8
-:104A50000551F53F553F1C6C9F08EDCEA8BEA8EA56
-:104A600085111FF78B2EF21AA8FD36A37F60DC2478
-:104A7000DC9F859E4F9ACAC7053E7018FD9FB77D83
-:104A800059A0EF76A9FAA28A9FF1FAE4273DF957D7
-:104A9000FC1EDD36052F55FA1A1D4717AA9C7229F0
-:104AA000F06942399D8E72FA3363BF6D78BD1BE4A5
-:104AB000B4584CEF31C2DB896F8BBE4476F7B7C672
-:104AC000717E6C2F56CE2D72A812D79BCB229417D5
-:104AD000359CFCFCB498D3C370EDAE715CCFB91AB1
-:104AE0001D4F2FFEFBD2F1B4E2FF1E743CA8FF194C
-:104AF00013EFF3ADE2CA6A3C7FABBE99EE4DB19FB6
-:104B00001AC86F1DDFEF3305FE20CF34787C38D70D
-:104B1000A843BB27D0C0EDFECE54F938D927AFF15A
-:104B20007BF8F72BF94AF75D94A8ECC40F8561FB7D
-:104B3000034EF2DBDCB7FB84C10BEF2F6D11CAD043
-:104B40001FB4B441BB9FCE0CEFEC583F78E7A82EC2
-:104B50008A2B0477E6CB387E3D6E16FD219D5921C8
-:104B60008C3D36A11F67023E8FB98701F3342ACFEF
-:104B7000A729FE1D16A707FCB8F71DF2F7605C0811
-:104B8000E9D7D823505E48E028F77734F570BEF0B7
-:104B9000518340FCE423253F23D06A21FFB6AA4776
-:104BA0007CACF4BBF74181F4BD217A85571B776952
-:104BB000FCEEDBC417E3F588B4BD7C1C8CB7A05FAA
-:104BC000E670EE6401EB8D60178E447D51966FCDDB
-:104BD000E6EB6321E22F5E8D1FE593A3BF253B72B9
-:104BE000E97E81A593DE11177FE99C13177F397247
-:104BF000381BC751F40C09FE0FFD87F17A4653F7B5
-:104C00000903DA05578BB36C2ED6FA05C788DCCFBB
-:104C10003AA64790D09F344681D3751BAC04A75960
-:104C2000EFAD48473A57CFE7EC7C7E5E67DFF9B4DB
-:104C300012DF9BFC9E2821BFFDF13B2D3FCFE67587
-:104C4000D92CE37B2D4968879C7D6F5512C2F1C733
-:104C500050E2F7927E78524CE83FFC6BF1A0DF788F
-:104C60006731CAB78715BFB108F22D39EA7F897F4E
-:104C70002FA784F3A94EFC8E11E2DF7E1EDFEE1C0F
-:104C8000E59F43F5A7F2781EB1C8F1F5959E54094A
-:104C9000F5BD12D82CC661BF6F651D185FE9CCF059
-:104CA000BF4EF4F1948EF017DEE7DFA1D82393BC5A
-:104CB000C3D014C63FC683AC31535EA39DE220EA45
-:104CC000776246811DAA7C576111C65D4B9438C836
-:104CD000782B1371FC4D06FFC6711877E9153D6BF3
-:104CE000F01DD1938EDF458A8FC7A8F161352EA3C1
-:104CF000C689878BCB0838CF788E67B1DF3D51E30B
-:104D00002FECCB3C7FB37D4A33DD8BDD8E3112E25D
-:104D10009F43E2297F463B353E9E22A2FCA1388D6F
-:104D2000369EB6B1E865C2B7CF1B479B5E3CDCFC44
-:104D300032B7E7E2E69F98FA4926D92F7FF9730A3E
-:104D4000C9B39E0B2477CE0D9894FB9DFDDC4FDDFF
-:104D500063207BFD1CD8411931F26CF9380E87BEF7
-:104D60009E19848F7B23D549D8BF53D17336BCB5E8
-:104D70006821EAD3C188C8F3B119B76BF646C449B4
-:104D80005C3F180227A93841DCC96C4D9C071456BA
-:104D9000FC056165DF33DEE1F64AA085C70F248597
-:104DA000DE023546E22747723305D58F3C32517C0F
-:104DB00061FF00F1D9FA7B797CF79AE30BDDBD0640
-:104DC0009697C06F5B338BF8CDB5FA6B195AC193C8
-:104DD000A3FC39AB44E127A58AFFB698E7F3A735D2
-:104DE0009755E2F7EFC2C39EB77F634982F34ED077
-:104DF0006FABFBDAE281BFBEC6B8616AD1B5F51B05
-:104E000093881E12F49B7E8DE37DF31AFBB55DE360
-:104E1000BC0BC725EAF7FF68FC333EBE191F0F8D98
-:104E20008F739A5EBB3B886D8F088F0E8411BA29F1
-:104E3000FB6A05205531F5BB66E46B73A7F278C0B9
-:104E4000866A7368BB108D8BAAF00A9672BD4B728E
-:104E50009F0FE27712477B23D5E940C7E7A632B21E
-:104E60001BCE5994EF2389D2A8F9747E127D1FA717
-:104E7000D39238BE3451196F383EF2BDD2CAF548CC
-:104E80002FD230DFAFC82DE17680D4CDC85FC344C8
-:104E900079D4029A571E45DFDF3BC49FA78419E5EA
-:104EA000F741BB7301E9CFB213D7B745897BA5CDD5
-:104EB0002974A29F2E0DE42DC6451EC3F808F9F5EE
-:104EC00025EAA7CE97ECE6F36D313001E358C171C6
-:104ED0003CAF82757C5F13D73866087FB05CA0B8A2
-:104EE000C6765CFFCF7461F70E273F1784AF7BAFA8
-:104EF00044F19637A67EAF88EECB2B718ED512EF9C
-:104F00007210ED0C58C7EA572B087F97F64DFD65D8
-:104F10001DEA832E91E03C440F57ECAB938A7DA8A9
-:104F2000DA57FD6827C6D81B3F50F4860474F58312
-:104F3000447C698BC0EDDFE0CFB8FD5B61F4E4C772
-:104F4000E653F52A7192E561EE8755EDDAF1DE90D0
-:104F50002E13E050F1A03E6C02395DB1BED488FC46
-:104F6000BA627DAE95FC4A2BF6E85478273AF79F53
-:104F70002AEBDC707480E212AFC4C52793DD466A69
-:104F80007F48C19F643C5B28571788ED287E47DC2B
-:104F900020E913F9C5EB41EFC7F52DEFE4EB55E33D
-:104FA00020F5617906CE73EAF0C07A2CCB1B9C33D6
-:104FB000C86FB8F2FC7A949B814B178E4C273F80C8
-:104FC000514E745F604B29F71FBE828A08C26BB6D0
-:104FD0004879BB15B3453AEFB47A0BD9E16906A617
-:104FE000C7EFB0A6CDE772ACBCC63E03EB6C512A4E
-:104FF000C9E1F2A372EADDEEA89D9F36BB2503E16D
-:1050000074B5F890EA2FB8CDE8FD6349C6E78F0F75
-:10501000351E7B8BF2CCEEE8D7C687D478CF70F103
-:1050200021353E1BA8F954134F0E8803B3D0AF525D
-:10503000F1EA298A0F07BA05C9E18CC68D027BCF38
-:105040001B09BE4ABC08FA1BF1BD0A38F65169F8C3
-:105050001D021E3FDA87F9B846FCBE9E4479B73F71
-:10506000C27CDC42FCBE1ECFC73D80F9B846BCFF07
-:10507000C1F371FB94FCDE40CF798A37A5B987E490
-:1050800053513CE221C197E19EA48957503D3E5EB9
-:10509000A1B7723B3470D440DF3F0F1C33139FAD78
-:1050A000EC593E06F531F5BBE44D182F88F12F9DE4
-:1050B000F57A2C78BFE7ACCF63C1384145EFC746DE
-:1050C00099F84E381B53989AC48811ED7D8403E5F6
-:1050D000F9F5545A10AE57F5EB77FF7FBFFEE7F1B5
-:1050E000EB7F2B4A97C43FCA7D3ABA575E7ED46B9A
-:1050F000B93B863F6CF071FFF006571ED1DF13BE3F
-:10510000BCD415B17EFC1A6EBFA5CD7659629FBF87
-:105110005BCAFDF86942E2FB0577B987E5B777B965
-:1051200013EA3B89E3011B6A381F51FDFD43E3038A
-:105130009ED75C317EFEB33F33D3BFAFD0BBDF44DD
-:10514000F2FC4FAF9A76A0DE5D5EB3624C32D4CBF8
-:105150004F9A9893CB234D5C61698DCE6B4949146E
-:1051600047F066D3F743E3E305353AE2EF83F18294
-:105170001AF114D515FDFC8EF3BF4BC64F94BE2219
-:10518000843AD1BE78A551F0F4B2A1F10318389B4E
-:105190004D815DD4703BC1536B26BBE06A7185BA0B
-:1051A000BD27D6A19FA08C6DEEC4EF5196B97412A5
-:1051B00088A20471059EDF59AEE811F1FE01C40F0B
-:1051C00094FBF17EC1AD6E6E9F6F55E47E5E0997D4
-:1051D00033EA38EA7BF1E77EC6AD8D3FC4B7BFA79F
-:1051E000B477D4946FC0730BCED531E4FF1D355521
-:1051F0006657CC782FB879DECC168C53D863E3147D
-:105200003C1E111F9F50F95345EF67B3F0DC9FE838
-:10521000E1FEA38083FB332B0E54D23D93E83A3951
-:105220007E3EE118BC6798CAF8BE9899FBB9C8AF32
-:10523000503EF7D33EFCF707982F95FE3D83C031D3
-:1052400057BB0DF9C85C719220937F7BD0DF8DFE38
-:10525000A885C71BE6603E70C5E2B213782E8BEBC3
-:105260000C9477B4F0782D7D675C9557158BB7AFAC
-:10527000B5627B91E0B1C8D85E5385ED37BF184663
-:10528000CF1E9B87BB077A891C83DE79E4DFFE296A
-:10529000DA4515F315BF771D97AB8B7BE61BF847F7
-:1052A000AFB472EE60EE9FC86EBED05341FEEC7498
-:1052B0008CB7BAA372A6E255903FC951F9F3B7CAA9
-:1052C0009D336E9EE73F01E40FAE276D3E8F0BC608
-:1052D0009FFF0B0A3E0D274F86E39F283F745338EC
-:1052E000BD088EA8DC95D19EBE2E2A7FA56EA88F04
-:1052F0001C1EFFF215BC4E1D46FF1A5D2A28DF1B3F
-:105300001B265FA3FBEFE3F7CE2A55F9E7FFE57E07
-:105310006FC5BE51FDDFAA3DD4A2C0592D1F50F468
-:10532000D9BF395F198562C27CE5B4C4F9CA777404
-:1053300009F41D16255FF9B09155EEB1639E9E727A
-:105340002F21E423FDE6F0D3BF5AFF9C1DEF250873
-:10535000128A9DC6AE13249F1B419F213DA8E70FD3
-:10536000DC2FD5C5F34B1BBBB5F71FD4725B29BF30
-:10537000AF500DFB213FB292C7376B2FA7EB80D701
-:1053800018929DE817FAAA18EB170AC8910C353F36
-:1053900030C4E552C23CBE263640F97E4D0D820730
-:1053A000E5C117F61379797EDFB5FA89EA4BB57E48
-:1053B000E6B525DC2F54EB1704D447CD3ADF4ACAB3
-:1053C000EF3D204889F244572BF87EB3E2A7DD6514
-:1053D000E478B0EB7A81F26AF15E0C9EEFAE033CAA
-:1053E0007F7E5739CF9F57FDB26A5EFCB8A85F96A3
-:1053F000EEC3A8F9F46A7EBC7A3F74FE566B18F5CA
-:105400008B4D862E07D2A19A57E42AE572CEAA7C4C
-:10541000773C7E9DCB4A2B5DA518A72BD50DE7E7E2
-:105420006A2B4DA0DFBCAEC8CF75A5C3EAE59DA52C
-:105430005ABD9CEAF17AF97F955F76CCF07EE15F08
-:10544000975C9BDFEA96C47ADC907E95A509C66BD3
-:10545000B724FE8EE8EF54FE1BF7EF8FB021F77BE9
-:10546000B87CEB14E45F4EA3389781E25C2A7FE9B5
-:105470004CE6E3EF53F88A5A9E50C61FEE7B93EF3B
-:105480002AFD5A04EF0F70DD25BBB57EB2D22EADDA
-:105490009F6C42779AA65E16CED2F4AF389AA7696F
-:1054A0009F1429D6B45F77B25C539FDA7FBDA6FF05
-:1054B000B48FAA34F51B07B47EB2E91717C4DD3BDD
-:1054C000E2F85D091811FBDE0CF35D9A7ED90DDA66
-:1054D0007DE5366BF735A655BB2F755C6750BBBFB6
-:1054E000FC4EEDFED2D07FEFFEE2FEFBDBDD32CDE7
-:1054F000D3D7934FDF03DC52E3A2EF5EABF7FFFE9F
-:105500001307AFFB52406F000000000000000000D6
-:105510001F8B080000000000000B53E16760F8518A
-:105520000FC15BF918182EF021F8F4C01CCC0C0C3C
-:105530009C40ACC8C8C02001C4FC40CC06C49E0C32
-:105540000C0CFF81F81B10BF05E22740EC0CC407D0
-:1055500058B09BE3C6CAC0E001C4DC40B378988968
-:10556000B7DF8917C17ECCC3C0700E889FF1D037DA
-:105570000C061B5E27403FBB7E43ED3A2932F0FE0E
-:1055800006612131609A1447F0A78AA3CA0B8B21C8
-:10559000D8C9D294D9950FD40F00F19321F080038C
-:1055A00000000000000000001F8B08000000000049
-:1055B000000BED7D0B7C94C5B5F87CBBDFBE92DDA6
-:1055C000CD26E44900370960501E4B80C84BDDF002
-:1055D0003252C40411828A2CAF10027914A9A5FF9B
-:1055E000DABB0B2804AADE5851A37F6A17041B2DCF
-:1055F000DA80D11B6DE02EA208D56A684551AB0D4B
-:10560000888808498C8F6AB57ACF3933DF66E7CB53
-:105610002E89B6FE6FFFBF7BC3AF1DE79B99336733
-:10562000CE3973E6CC9999B32696C20C9733F60D12
-:10563000FE416A3331C6C674A5ED4AC77035A7ABC3
-:10564000FC36BF9779CD8CD5F9AD946EF1A733EFC9
-:1056500060F8EE331406ED8CDDEB7751FE17FE4259
-:105660004A6BFD4554EF4E7F09E56FF7FB28DDECF3
-:105670002FA3EF35FE6ACA6FF0AFA17493BA280D5D
-:105680005082BFA2C2AC64C6AA9EC9C9DB0CB92DA8
-:10569000B3C627A8A321FF8A9119B300BE4FA5FE68
-:1056A00098EADE347074573D0DCF4DEAA47E08A70A
-:1056B0007609C78B59992D46BD2C1CE79D4B043CA0
-:1056C0007B6B4D4E72D47A8311DEED25006F28146A
-:1056D000B842D69CE8F02E46789B4B545E2F395842
-:1056E000931D1D9E07EBD5DC20E0A507AC31EA8DAC
-:1056F000C17A1B6E10F8F5F3D56445EF773CD6639D
-:105700002EF56FAD56467FDF64E3FFDB5DA72E16F7
-:1057100079236693181BD7D54E9F321660384E9565
-:10572000F90A890FEECCAFBFC967EC268409ED03F7
-:105730009358C808FD079258707D96547F26D56F00
-:10574000EDFBF537A952FD80214A7D136B50B0FC6B
-:10575000E72847C0F7FBFCB9946E14F273DF5003DF
-:1057600063D82EDD1C1C04EDEEF17B485EEEF68F57
-:10577000A5F2BB841CFEBB90B3A090B30751CE2012
-:10578000DD8A7266C6FE7CADA500A77D6F3CDBECB2
-:1057900026F95A4C78AA8CE06FD83B64FB66807F70
-:1057A000DF0DAB4E6F03FAB7350FF318A1DE3D43A3
-:1057B00035F9625E96DC55EF9ED9279C8B8612BD2B
-:1057C000CB10CEDD1EC13F15061651EFEE19E17A62
-:1057D0001558EF2E4F185E28B2DFBBA684EBAD2222
-:1057E0003E2BACA4C1DE9D2F3B9842F3110485E80B
-:1057F0006B42FAC2BC7C76C0754A2BB44F49CE4B83
-:1058000063D0EE7E9C8F669C776EA28BD61EE9ECF1
-:1058100083EF1916568DF081B2FB8D80AF69B63BD0
-:1058200011E972FBB5454C19C6585F519E1A2852B2
-:10583000B200AE7D4E9182DF4DB3A11CBEBB447958
-:10584000F21A5E7E3B963BBACA13B11CBE27554383
-:1058500039E4ED7379F91D7EE0C4E0AE7A9B80CF28
-:105860003EE2773AFF0E6C45FA9846F354C3FB09C3
-:105870001412A0DF414CC774E1BF69D0BD190BED14
-:105880005DF8DA06D7535EC36FD3E038CA6BF8D839
-:105890002EEC97B110D2BE4BFA326FAE980FAC3BE4
-:1058A0009D13BDD95279A6EA4950814E992F1959B5
-:1058B00000589009E289F0F4ED8A9881F0EC71FECD
-:1058C00025F76EFE9986CA74D0D2A3821E1A1D36A1
-:1058D000F697E9601920D361E300990E960BCE4F3D
-:1058E000871DCC4D748E450FADDFCD43E47EE32E96
-:1058F00092FBDD7C91DC6FDCC5FF9C7E6BB2E47EAD
-:10590000ADD972BF35D972BFD69C7FAC5FA67A6025
-:1059100032A0BED2FE2E94F4DBD5CC7716DBA39E4C
-:10592000C3F9A4E93953B28FF9EC5DFC84758AB1EF
-:10593000FC48388325BD0A703EC57A00C77B7E3897
-:105940002E1D9C417A385F0B7C58A49EEE06870D75
-:10595000D48FC3A4F076214344FF4CF5B1224764B1
-:105960003B8FAEFF1C7DFF4E458CC370DEFEDD3AE3
-:10597000BA66EBF14913F830C3F9E8C15C3A38591B
-:105980007A386E814F48392F1CB77E1C178AFE0368
-:105990008AB47E013D8675B56B07FC689DCAB30469
-:1059A00077827E08EDFBF214AE03E71AAF755BA0B9
-:1059B000FEFE9196D0E5507E2E5810B440F9E427B3
-:1059C0008F3AD18EA978D2A862B9619F8DD697B649
-:1059D0001D0A9557595AEE9C00E51D4F1AD976EAD3
-:1059E0002ED380E33B25740A0BF17CA98D672BB67F
-:1059F000EDBF11DB973559980DE0553CBD6CE604C1
-:105A0000C82F3B646258A562E75A735FC82F0F2AFC
-:105A10000D98077C699D0AE4D9823BA1FEBA7D5F9F
-:105A2000B621FEE71A4D83109F33B04EB8619D78C2
-:105A3000C9D1923A1BE8531EDC3D0DDB97EF523C77
-:105A4000A0E100FF9D073310FF47148F0558B8A24F
-:105A50003E9EB923E6CBA946238D77D53625C800CF
-:105A6000DE32563B0DE95981C4413C3C96A04DE9DC
-:105A70009A6F67FC75D49F96AF7804FA83F6958F7A
-:105A80002B1E1C72A581F9701EB73D6D2B79C88E37
-:105A9000E35D6B1EECC0716E3463BD65C1854FD98B
-:105AA000DC88E736F334C477EB3673E950A4235B24
-:105AB000503414F1FBBF327E75462F8E77D548CB1C
-:105AC0007623E0C1ECA181B31CDDF5EC1958AFDC05
-:105AD00011EB673903BD4FEB77D05C3CACEBFB9728
-:105AE0008644D21F2BEA8DCC6DEDEA47938FC0110F
-:105AF000211F7B1D446F8D9FAB5C7C0A68FC5C950D
-:105B000028F8AB76E4CF1AD61D9F3B912F644FBB8C
-:105B100028FD05AC9B986E81751EE9772FD84F6ED6
-:105B2000B2CB3DF4FD01B09330DD0A7612A60F82B0
-:105B30009DE4167612D6DB0E7612A63BC04EC2EF5F
-:105B40000F833D8E693DD8E3F8FD51B0C731DDE5E7
-:105B50000FD0F7C7FD359436F86B29DD837C83B40D
-:105B6000D11FA47A4FF9EB296DF237D0F767FC4DBE
-:105B700094DE2EE8E89CC80A701D757A990BC99EC0
-:105B800034C35B60827C5211CFA7DE102830433EC5
-:105B9000D50779A04BDF95A1020BE4FB56F3F20188
-:105BA000B7B04956C80F08F0F2ECDBBD936C90CF4C
-:105BB000AEE5E583B70626C5417E7090975FB42BAE
-:105BC00034291EF21735F0F2E1CD6CB21DF2C34359
-:105BD0003C9FF79277B203F2792D3C9FFFE7C064B8
-:105BE00027E4F35B79FBF16783467794F5778FC9F8
-:105BF000BD1855CE01E56DAF9A0179B3FB265489E6
-:105C0000479553946F3479A9FC7DA5DDABC23ADF8B
-:105C100068F652F917CAE7947FCAE4A3F278835270
-:105C20004079B38FCAFB1BE228DF640A50F90843AE
-:105C30001F9E3707A8BCC0D0AF00E13F630A52F9EE
-:105C40003586413C6F0E52F92FD4E10553A0FEE397
-:105C500006DF5ED477EB155F19DA874C6D48477D18
-:105C6000A5D9953B717068676698691EECF943FE8B
-:105C700043340FF02F19F3A50FA35D0A700E121C09
-:105C800013C031F60C27EFE5B1129CBC97CB34382A
-:105C9000AF101C5BEFE0EC7979BC8CCFCBE51A9CA4
-:105CA0006304C7D1BB71E5BD3251C6E795951A9C17
-:105CB000E30427B177F8341E95E9D378344C9F3349
-:105CC000B83EAC4FE91D3EA35F93E933FAB5307D92
-:105CD0003E267C327A07A7F135993E8DAF85E9F3F0
-:105CE00015C1E9DFBB718D7E5DA6CFE8D7C3F43166
-:105CF00019104E56EFE03CF5B64C9FA7DE0ED3C709
-:105D00006940FA0CEADDB8F2DF91E993FF4E983E64
-:105D10006984CF90DEC179EA1D993E4FBD13A68FED
-:105D20009BF019D6BB71E5FF45A64FFE5FC2F41983
-:105D3000427046F60E9FA6F764FA34BD17A64F1EB2
-:105D4000C119D33B7CC69E92E933F654983E1308A2
-:105D5000CEB8DEC1693A25D3A7E954983E5388CE20
-:105D600097F66E5C63DF97E933F6FD307DAE22383F
-:105D700005BE7AC287011C476C38CF9C93E9F3CCEF
-:105D8000B9307DE6109CA90027A76738E3DB64FAE9
-:105D90008C6F0BD36701C1B9B277709E6993E9F339
-:105DA0004C5B983E6544E7AB7A37AEF1ED327DC689
-:105DB000B773FA54593C931D68DF2532CF76687269
-:105DC000C9C986034EC89BECCC83605F52423B102E
-:105DD0003EAC956417AA1ECD4EF130B4436738DD52
-:105DE0001EF4FB18357B84B5D07EC1BE2B51F20763
-:105DF0007D6998740BE2EB00AB2DD22E49181B275E
-:105E0000D94389DE2429DFA7B0AF543FA5285B2AF8
-:105E10004F2BB9482ACFF0E549F9CCB2F152FDFE3B
-:105E2000D593A4FC056BA64BF5B302B3A47C4ECD71
-:105E30007552FD41B58BA4F20BEBCAA5F221C155F9
-:105E400052FEE2FAFF23D51FD6B04E2A1FD1B45915
-:105E50002A1F19FA85941F75E801A9FE9896ED523C
-:105E6000F925C71E95CAC7B5EE91F2134E3FA3B3ED
-:105E700003E5FDFFFA02C6EDC10C33D983218799F2
-:105E8000F2E67D36B2FFF7631EF869EE3B83F2E679
-:105E90006717BB93713F8D0060BD2FE85B7621FAD9
-:105EA0007B6E1EEFBBD005DF6F36FB46B8A2F82332
-:105EB0003CAA6F9F81FC452D0A4BC7D46DC034CEE0
-:105EC00028F6EB162E5F1BB3F21F0A44C8694D7FFC
-:105ED000987F903F6C3093FDAAC9F7C6FEA5E90BE9
-:105EE00023FAD9D0DF5CB27D28FFBED88EFD15BD68
-:105EF00088F3ACCADC3118F1D2F763C91E2BF56305
-:105F00001D5046FDBC86FD44F8BD2C03CA74FD58E7
-:105F10004BB68BEFA29F6338AE58FD6CCC1E2F8F13
-:105F2000674039F5F3AEAE9F8D03CA75FDC4F1F13C
-:105F3000C077D1CF7BE71D4FCE44793C17ACA47E10
-:105F40003A7474B35CB052D78F9DFAC1EF8BC99F7E
-:105F50000BBB8034E0B3A5A394E4E03F6D2C00724A
-:105F600061CE2CFF35E6D95B363608FB7143BF5056
-:105F70008FE572FFD1D386241ACF6771C0FF083B2B
-:105F8000B56B3F1BA07DF15281220B0246B0BFAD25
-:105F900014B2B96457F1809BDC90361D187837F63F
-:105FA000B3C5E11904F9B6A6C9E6C551E46969ADFE
-:105FB000E9546BA45F44DBDF4C62B9D5D0FF2E9B64
-:105FC0004BCA6BE94AC5C5843F82F22760DFC260D5
-:105FD0003FF067D8173020D5BB26BE4F7B07F6377A
-:105FE000986F85FD0D9633B696DA9D107EDA13B75D
-:105FF0002B41A4F7673FF9A189F47880BD9A9E8A66
-:106000007E37FEB7604D3CFAF8C3F82D0CF491F2E0
-:10601000A02E330DE9B42FA4FD6FC7D396E076A46C
-:106020006B4D26D054D4CB66EC75D8E4662451363B
-:10603000D33096B1D9D5C553D3681629FD57019EE3
-:10604000B31A479AA0056B33B5DEE8B177C1655E38
-:10605000D309A48F15FE219C6B0A211FD1FFB545E2
-:10606000727E2E53BBF2C0EFC1C66CC137D1AFDB1D
-:106070006B42BE16A5727CE6629A87C5DCDF51E2F0
-:10608000E26D357CAA169B5888F6A7811486FEE837
-:106090004032D5BB4EDB67EAF02B3159BD4540D7C6
-:1060A000928546A2AB1EDF37F7C57B0DC321ADB984
-:1060B000DB84AECD9EF09FE793CB5919EF4FA3AB96
-:1060C000262FA7047F4F20FF217D1FF90F789F14F3
-:1060D000FCEF9263CEFF2A8B6F26F2BFE37E232371
-:1060E0007E09BECF117C5F5A2BF37D0EFAC9A1FE4B
-:1060F0009CD559C1F558BFAE8FC45F18B84C87DA2C
-:10610000BBA6825AED86FFDB420EAEABD9FD3CB298
-:10611000F7FA32DDF8041F6E147C98AFA3C71CC1D8
-:10612000B7F9826FCB58E0B60CF21F054DE8179B0C
-:1061300057A630D417553FD5F8D62AF1CDA7F14D43
-:1061400087EF8D826F37FE84F34D8F77ABE05B6B0B
-:10615000DDC72696DD1D6F3D9E0BD6E8C615D0F334
-:10616000AD569C3BB8CC68EF147B0BFA9C8CA87F97
-:106170004DE1957D4E46E8856B8B8AA5FCDC9279D6
-:1061800052FD79BE8552F9F565CBA5F2F9D53F945C
-:10619000F20BD6FC44AABF30B0562A5F5CB3492A42
-:1061A0005F5A7B97945F5677BF547F79709B54BE3C
-:1061B000A2FE11A9BCA261B794AF6A7A5AAA6FD89D
-:1061C00037E46A94AF978E1A19FACB3EF5BC4FFEAE
-:1061D000BA4F3D260FD6A944991B87F2EC26793E8B
-:1061E000E5CFA5F4B4DF43F27EC63F96D2B6A60350
-:1061F00076F43F56C581DE4F043BDCF8E6DA9A7E42
-:10620000B8DE40FBF18C351B5BD706207F000FA367
-:1062100060DECCA833B3D02806D2DD372CCF1DC624
-:1062200088F2D61ECAEB5416EAD3BD7C466BF4EF57
-:10623000ED4AC7E00CF413BE61613B23FC75DDCF72
-:106240002B5826DA15B1CACF1A5859E479D6492302
-:106250003F27711A279D3442BAD2CCE7FFCA3D19B5
-:10626000939813F3A1C1D551FC2EE1FE1A00993485
-:10627000E4738E34EF97D55DDC35CF19F6934D720C
-:10628000BB3C384AFABEA27E82D42E57F1BD6B8445
-:106290007A67F71B69BD66A10303AE1986F8794FCB
-:1062A000E277D6944276578BDFDBE7E440C6FEE820
-:1062B0002FA4F4557F11A5AFF94B283DE6F751FA0D
-:1062C000A6BF8CD23FFBAB297DC7BF86D2567F804D
-:1062D000D213FE1A4A4FFA6B293DE5AFA3F4B43F3F
-:1062E00048E9197F3DA567FD0D94B6F99B28D5F4C3
-:1062F000674FF2775AACAF6750FEA2C899F956B60D
-:10630000AE6662979CC5A9967528671A7D67D459B1
-:10631000843CA44AF29088EB30C9590FE5752621D8
-:1063200087B1DA472F4779EBFB3DC81B63EB480E7B
-:10633000660AB9FBAEF2C6D01B9F82F294A99327DE
-:10634000590E3539D2F440AE52345C1DD325573343
-:106350008DDC4ED2E4EAE7682746B1B76E5015B13E
-:10636000FE71FB88F9320C68BFAD127E7FE64EA746
-:106370007CA7E87B3D806BC17A6A3017D791CEDC71
-:10638000BF0D46FF78E7310B433F7CACF1E9E525D3
-:1063900036DDBDB47F280DC2A236AA7BB92D8ED3BF
-:1063A000D56660852C0FCF67F38FF9809F71FF79D9
-:1063B000711EEE6BE1BBCAC8AE0A7A8AA3F8DB197C
-:1063C000CA785ACFF4D5EA9F7AE0CB7C3C379F2934
-:1063D000E679DC01233FD70E3DE4B926E27C06F6E0
-:1063E000DBE9E877EE18647691FD10EA2BD331D81B
-:1063F00057A2E381419F0DC6F38D4D208738BF3AE8
-:10640000070E4E60E7918F9EF47C4FF45C14ECDB3A
-:106410004B7A9A199E1B013DB7E3FD97DED2B32755
-:106420003DD9937E3CB199D3D929ECD358746E9F52
-:1064300004F32E8A1CDFA3AAB21CB381FCBC43A3C5
-:106440003FEE4B23E87FA9DD4DF59FDBF7D6805665
-:10645000E8A7B3F1C204C6CF73C8AEEB7852D8ED4B
-:10646000EE4C998FAD7D09AE06E7B9275F1F80FB23
-:10647000E4DB3003F3ECC9F8A25FA9295DF07A7B75
-:106480000E1F6B5CBBBFE5FC6C4FD5E667CB009481
-:10649000A7CF841E8839BE9EE414C70770AE52F899
-:1064A000F836188B7E877A263CBED129BD1A5F55F7
-:1064B00082992923003F87D9CC1218DBA1FA0EAAB2
-:1064C000B48FF3B406D04FB12FDEB31E5852E53C63
-:1064D000F372C88DED647FC68A7A9B4BB69F125DBE
-:1064E000B2FD94E18AB49F3A0F3DE4F4017EABD251
-:1064F0000DAE93A3709DF38A758EAFAB1A7E150D0A
-:10650000592EBB0447CE77D62A850D244FEE84D969
-:1065100051CECBB47455BAD97512D6AB33F539090F
-:10652000D8EF19BFD5C5D757978BF79BEE8A5C5F1D
-:1065300057AE89A3FA1A7EB1E0FEB3F163AC91BD08
-:106540006BC57511CA7262D78FC94FF513339D4B56
-:10655000379B3E43FBDD96ABD9EF2AE535B8550DA9
-:10656000C68065047EDF25F507EDDCDA1933B68BCE
-:106570002D372A3BA5F113F86FC58377DAB75A890F
-:10658000CF3E809800F0DA557B0DCAD50995CFE74C
-:106590002A21A715D656B3CF4DE46E41795E3496C5
-:1065A000691366EE5BA0A73F78D144F7B4D85700D3
-:1065B0003DBFEBAAC01256E444A7E7A2C61533704C
-:1065C000DDFEC0A0ED876BF371DCE798A110F5D27A
-:1065D00039F647E7A888F93AC4C4FD31AC86EF73B1
-:1065E00002F00FC7B7B456DEF72CAB93F3A56C5689
-:1065F0002AEADBD22D261604DC97E3BE491B37E8D6
-:10660000DF0C13F76B2C63D51B709F7EAF89FB7B70
-:1066100016B9989A097855FCC72FF3D1EFE3317179
-:10662000BB433B4F5E9EC4F12E9F1D347BA1FEBB3E
-:106630008DA3E680C685F6C10D64FF1433CF4ED618
-:106640009DEE8B6B64FC7AC25F8FAF6607753BD79C
-:10665000167824D72BDE60143D77994911FB3F3E15
-:106660003F669B647FCE3C93ECF7D1E4C024E4E02A
-:1066700084EABBDA3486F31DF9A8A81D665F443DA1
-:106680007357BDD9E7AB67C17A46AA37CF9482F575
-:106690003AA6D1FE98813C0DEDAA67EB827723875D
-:1066A00027D7ABF88FC79E0A80BC94FFF61E2783BE
-:1066B00075F303B536D503DF57EEBCCDE985F4B4E9
-:1066C0001A70223F3F081A0BA3D1634B981E5EBB82
-:1066D00082FE34219FAC26407E8ACF769A5CE4E726
-:1066E000AFB7842C20A7958DCB67B0E1943FCEF354
-:1066F0001B3F3262BE49E657F9AFEF4975F37B366F
-:10670000DC9FC44264E756EE786F1AAE1755AC832F
-:10671000E44CDF0EFBFF3C89E6F5427342F772C0A2
-:1067200093FC095562965535FEFC23A313F3B27C06
-:1067300094097B15E984FBFCDB4C8EE453F190BD9E
-:10674000845D82F35CA3070B72BB75FD23F70D3FDD
-:106750000EF89CDDF1A253191AA91FB89C75362CAE
-:10676000FE95D5105B8FB4811C46DA470098DAB9E4
-:106770009B84BDDDCCD395A69013EFB3ACDC66F261
-:106780008004B2958F1919DE03606F5882E8175D97
-:10679000F1D8F3AF8D07BAAFD86D4A9EC187635762
-:1067A00052BBF85205FF5B93D7C587F2279E37BBD4
-:1067B00087F1EFB72475F163C5EEFD6636AC3BFD9E
-:1067C0002637EC37B7DAA3F0A5E1F8345C67D73F9A
-:1067D000F25733FA133FD8A7B0B4ACEEEDCBB63DC9
-:1067E0004FEB1DD289F828F814E65B377E85663EAC
-:1067F000339AEAB9500FC6E2D732A177419E1F7F84
-:1068000006EFFFBC69F1E0F8CB1EBFC989E3785FF2
-:10681000ADE672FDCBDB52717E979902A92E4AF943
-:10682000F7B2077F44F2B6ECC88F52C95E60DE0C47
-:1068300003E9E240068E6FE9D66B697CA5CC47720E
-:1068400057F64B6311DE47FC546585BBA3CC8B38F0
-:10685000B342F8BCBF1D0C1918DFFBB8BF447DF66E
-:106860004723DD8B62EC87746FEC4762ACB0F2516A
-:10687000FE532BE7D371A12771224BF2BA63630B4E
-:10688000F2E74C7F6F1A9E73001D02825ECA3700CA
-:10689000D778646A1AE70F73ABF9A21DE8F7C9F855
-:1068A0001DEBB798BCB6E1523BA10F79FFAB45FF9A
-:1068B00080771CAE57EFA746B7F7C688F1C15F0BCC
-:1068C0008B90AF88F9CDE7FB8E4D7C7E6BF33D5806
-:1068D0005C88E59FBCCAE70FB6C3F501F00AA55175
-:1068E000F9FED90AE903D857479BD73B4C625ECBE8
-:1068F000E56029D27A0F78AB4A42A49C00FC24A21E
-:106900003FED834BB740BB08FBAB0AFBA37AE6AE77
-:10691000EF11EBC332A1074C6698FF1777CD7FB616
-:1069200095CFFB9EECC995A6E0C30FE07C7DC3E24A
-:1069300009B871BE9A8A70DC1FEE3AF0DA7520D77A
-:106940001F3668F354D69FFA795AB6670C8B364FC8
-:106950003FB4C3FE2ADA3C85EF51E7A9BD95E4F8C0
-:10696000FBD69F1ADD869A65BD897AF019776CFA95
-:10697000E9F5E0EF4D6EA2A35E0FC2DFAB2CBFBB0B
-:10698000DC69F2A6C959F96F2A2E407D1396474D4E
-:10699000DEC2F2A8C99B7E9C32DDF4E57F15FAE6E3
-:1069A0007A6BE13568175B3B18ED570A661B83B8B5
-:1069B0004FB67EC268BE4FBA219EF2738DAD4FA016
-:1069C000CDF756C5DC61B88E5FCF02267E6E5E6B5A
-:1069D000223BF5AB6FBE9908E3B94ED0F57A20F3B0
-:1069E00055C087125509C5019EF354164848427F89
-:1069F000B1C24E44E0717D999CC7BFCB52BBE0F45D
-:106A000054FFDBDAD5DF353DE2E767577FC294F606
-:106A100017603847C85171333FA7A81AAD04B3694E
-:106A2000FEB5AA4511FB84C7CCDCCE3832E59A31DD
-:106A300048BF82B9C31248BE6B87D03EB04AE8ADAA
-:106A4000CE803B01F57967730EEDFB3A0F2D76F89A
-:106A5000A2E8AF0342CE9E17E72CED76A5D608F24A
-:106A6000DECE3AC86E09D86D51FD6E756683B0777B
-:106A700004DFE0CF08FD9708399C074D13F222F898
-:106A800036FBAA0F5467773EE0DF89887DC33F4A13
-:106A90005F946BA4EF015BEBB4A228FE994785BE1F
-:106AA000BEECD92FCCB8CE4D692E50918E53EC460A
-:106AB000C9DFB15D9BAF43D950C4EBB26797DF31FB
-:106AC00006E4B8EA90D16383F155357F64F645D981
-:106AD000BFE9E989F0D17E6C3573FBF8A8A9682974
-:106AE000D2F5E8B5FC3CF74F664F45343C675B395F
-:106AF0009EF358D1A7A3957F3DFA16CC7584260145
-:106B00003D3AEDFC7E7277F9E3F3BED3A504D72AB4
-:106B10002887469E4FE6F77FA731DF1D13159AEFB2
-:106B20009747EAAF82A6E2C7F03E4B65B3E2324038
-:106B300079A5DA6A4639AE6ADAADA25DFE03377F1F
-:106B400067C1D4EA61B323FC5BAD66EE4F3AF0B7A0
-:106B5000EBE6237D3F9E6D61889777E8474E5CEFBB
-:106B60003F6E1E45F320D6B8FEE0F75C3305FDF11D
-:106B700066AECFF4F2302D395ECA5F3B99F5C37330
-:106B8000DECB2CAD3779A2F06F9D85CFD35EEB378E
-:106B9000EBFF30FD3611F41B976B53A47E9B6EE127
-:106BA000721FA1DFD2A2E9B7556BDD692817ABF6DA
-:106BB000E6A4215F571D5E9A124DBFBD20F6B58732
-:106BC000C53DE9F67EA0DF4644E8B77EA0DFA2F827
-:106BD000C1475B34BBB307FD66FDEF997F2FA07EF5
-:106BE0008B32DE2B84DC69FAADB0792DE9B7C27E39
-:106BF00046E93ED2651661C7C5D46F0BEFB996F270
-:106C0000264F7C14F941BAA27E3B2CF41CF6837A01
-:106C1000EE67966FA7E7E65939BE3DEAB9FF263A17
-:106C20006B7A6E557F85EC97EE72C8F5DCAA2CAEB8
-:106C3000E756EDE57A6ED520AEE7F4FA6D5237FDF2
-:106C4000C6DB57E6427BDA2766DD7703DEE72B31CA
-:106C500079AC507F865B7B5F503D2652DFFDCC12C6
-:106C600043DF7940DFD97BD677AFA0BE53498F0D84
-:106C7000C479A4978FE903E3A5FB6A47BF38F59B66
-:106C8000DFE27CF98391EE03BD6EE0FBA17D5F9CAA
-:106C90001A85F3EE65C407E6CB4E217F6DFEB1A4E5
-:106CA0004F270FE5F3BDE2501CAD13958D0A1FEF82
-:106CB0002D4AD08DEBC0DF3EA77DF2FCBD7C9F3C12
-:106CC000D7C2E9C17E6CE4EF2280040B23E4A1E487
-:106CD000F372F2F395A8CC8AF6EB8243D33F40BB24
-:106CE00075C1E73564EF2EC0EF78BF6277EB864C55
-:106CF000E877FE7285F61B4CDC87D0EE4B5CDFBC80
-:106D00009FEEAFE8EF4168FA7C7EB5FC7D81CEAEA8
-:106D10003F20C609F62CD185BD628CEA9F3BA0A717
-:106D200087878FBF6235B78FC3F400FAB895EEF44A
-:106D3000008ECE5898DA35FEF94FC2B892BBC6A580
-:106D4000D1433F3E6D7FB240CC8D58E3D5E8D76D3F
-:106D5000BC1A3D75E37EDE22ECA28BD9309C67AF76
-:106D60001B7C778C41B9F83D8C1FF099336F505ADA
-:106D7000A41E7E51E8F3AB7CC7A7A4BA915EFCFDCC
-:106D8000DD7565BB9F4F85715CEDCDCAC3AB08D780
-:106D9000FECDEC433FC2015B07E9354DAE2EB47228
-:106DA00039FFBB8073B4AF6B0AAD1F4D8A8BE64BC6
-:106DB00048A7B7C4BDB02AA027CEC7AA26B1DE8097
-:106DC000BCE17C9BA6AD3F487FF8CFAB9A39FDABC9
-:106DD000AA15A2FF4CD67110E95B99AC7842006A03
-:106DE0005AD3EEDBF01ED50B36F88EF3B64CF16CB1
-:106DF000E7E4B067A446954B359A5CB2EA21E457C4
-:106E0000D0D6C105582F09DF8BBC9E82F689DEDE05
-:106E1000B8CCD27214F1B8ECC726B68D75B73F3432
-:106E20007EE7C2BF6FA2DDE7E9417E0709FBF205FD
-:106E3000A4B71DE9DA6146B9AF0AF175432BAF5229
-:106E4000DD53883E1ABD9B605D18CDE98DEFBEF421
-:106E5000F4BC5ACBA33C63FD66C584EDAF043EF49D
-:106E600081A2C9862F0E6AF28BEFC4F474C1FD7F34
-:106E700046C47C47BD1479EE58D97484E8327D3518
-:106E800098551174477D753EFA749B0F4DFBA3DE38
-:106E900083FAB6F3E142AB3C1FF6D93A5E1C81FEA1
-:106EA000ADBD0AE903D69C28EDEFAFB0F27DD3016A
-:106EB0009B8FE4B6E3B089EE7BEBF5C658417FDCEF
-:106EC0004F44BE839B8C03C1F35D978DBDABE191B5
-:106ED000CDE527525FBF60F3119F62C19F26E0C7D7
-:106EE000B297C2F8627F789EE296FBD3AF179A9F63
-:106EF000A7A7715D23D6FBEF3AAEF0F9246B3133CF
-:106F0000EECFDF6D8E38679A23FCFC9A1F2CA2DE31
-:106F10004CCB98D8F5D0DF128271BFB0EB21F2EBE9
-:106F20009E7BF4F84C94DB15BF33322BF0B96D9790
-:106F30008385F83D0A33AEABE58DC6A8E7228CAD5C
-:106F400027FC56FCD6417AA57C8F253803DA973F7B
-:106F5000F5EE70F44FB5ADE3FA25F0A8908F40EB55
-:106F6000703C2F2F57F979B11EDE8F85BC9C7D3A7E
-:106F7000BE04F5A352CFDF759637CC355922F6E51E
-:106F80009578E0C6EBD13DE4C0230AF9C1BBE3B775
-:106F900096D77B84EBBDF2265310DF8796D76FA37D
-:106FA000FD6C55FD4766B4E326FFF631B223AA9A7D
-:106FB0008CB29FB0DE18B2901FD3781C53BDBFAE09
-:106FC000B2B182E6636583F087E9FC452B7EBBF7AF
-:106FD000A9009066C513BF76A29E39D3B2D3497E6D
-:106FE000B87AEE6753ED6A743F5C4FFEB7864D5139
-:106FF000FD6F67F03F60FE6DB5CAFE3756DFA757DD
-:10700000E7E02B1EFBF4413C173ABBE7C30711EF47
-:10701000955F7FFCE04FD13ED96773E17A57F5E881
-:1070200051F2AB6BED9E12F3AAED915F3FFC00CCE9
-:10703000BFB6372C74FFAA6DEFFB03DC30CEB6DD94
-:107040005FA4A2FF72F5DEA9B46F59FDE4E4B4F3C6
-:10705000DD2341B90CF6E23C44CF87038D4686EF31
-:1070600020CF1DB3909D11F6A3365470BFB45BF8CA
-:107070004F77453F77D2FC7E958DD75C7D29AE7BDF
-:107080008D268F9BBE0B3F604F7ED357819F237A07
-:10709000C1B75DC22FAEE3DB39FC0FE0CF9FACB2CE
-:1070A000BFF9D3C6A5BF7A00CB1AFBC4F49B867A7E
-:1070B000412FED5C6B9BD5FB8E15E7C39EDF907F68
-:1070C0001AF90536376B7BECD301E86F386DEAB8F7
-:1070D00091EE5FECB5D03DA1F2BDAFD3FC687BF281
-:1070E000089D173171AED4C6C27FFC1C40EC65AA66
-:1070F0007638B8BF55D01DFDB16E277D177E572E4F
-:10710000B79A3F36961FB68F4DDC0317E76C153BD9
-:10711000DE32339D5F5B198B7C3A2E9D0B6AE3D682
-:10712000C373211D2E893C4F88E5E7167A34CC279E
-:107130007E8ED0B64D9C2F84CF0D18EB9787F7DF4E
-:10714000F979775550799D45998FDA7982D3A69B45
-:107150008FC1DE9D23F48CEF77A38762E3FB568D0E
-:107160002E67BF8AAE8F87D814F1FEC0976B8B58FD
-:10717000771688F5A412E8C5DF93717CCF8AFDDD10
-:10718000D9478D41DC076F6838407A553FAF2B599E
-:10719000F4F821E36D5C9F5436ED1F8EFAE7ECB3F3
-:1071A0004F93DC55EE3A6E0E009C83F54F985B874B
-:1071B00076C939EAEB6084BE3EFBF8FEE1FC9C83B5
-:1071C000EF23F5F0AF10F0AB9A65F855BB3E92E0B7
-:1071D000AF0834985DF69EFB39A37AE7E278CFB426
-:1071E00098282ECA99066361B47825433190544A91
-:1071F000179D3638F8FB38639299ECC8D58EB1C725
-:1072000012923135BB711FBD7E2DBF0FB9FE679E37
-:1072100074E4CBFAC439740E54ABA3A32BD95580B4
-:10722000FB6BD794A2D128567A3D90E8354878AFC9
-:107230007614A6E17BEE5B853DC2540FBDDF333A89
-:10724000A715E2388C2E83CB16751DE5F04CF6227F
-:107250008A176172C9EFE9BEF7F80FEE7E72FC87FC
-:1072600040BF7F34FE03A33818FFEFE33F04B09F15
-:107270007F81F80F21F2DB68F11F92BFE7F80F6BF7
-:10728000991CFF41F0331CFF41F0F37FE33FFCFF0B
-:1072900015FFC118F7F729189F418BFF9012679EC1
-:1072A0001A19FFE1C2B884A991F11FC6C5A54F8D77
-:1072B0008CFFF083B8ACA991F11FE6C75D3435327D
-:1072C000FE4355DCA8A991F11FD6C64DA4BC16FFFC
-:1072D000E1EEB8A953E5F80F33A74E817C5B9CEF34
-:1072E000EFB85EC58AFFF01E4E96313DC77F00386D
-:1072F000E6B831B1E33FE8E1C48AFF007012084EFE
-:107300008CF80FDDF08911FF01E0A4139C18F11F28
-:10731000BAE11323FE03C0C9223831E23FE8E1C4D9
-:107320008AFF00702E8A4B891DFF410F2756FC07EC
-:1073300080338AF08911FFA11B3E31E23F009C8916
-:10734000042746FC876EF8C488FF0070A6D2B86296
-:10735000C47FD0C38915FF01E0CC247C62C47FD0F8
-:10736000C38915FF01E0CC257C62C47FE8864F8C81
-:10737000F80F00C747F8C488FFD00D9F18F11F0011
-:10738000CE72821323FE831E4EACF80F006715C128
-:107390008911FF410F2756FC0780F353821323FE08
-:1073A00043377C62C47F0038B7129C18F11FBAE1E2
-:1073B0001323FE03C0B983E0C488FFA087132BFE0C
-:1073C00003C0B997E0C488FFA087132BFE03C0F960
-:1073D00015C18911FFA11B3E31E23F009C7A92C387
-:1073E00018F11FBAE1F35DE33FD84203951C8AFF11
-:1073F000407122C3F11F92BF75FC8766C4F77FE31B
-:107400003FFCCF8CFF70B3DDF7751CF941BF5BFC0F
-:10741000075BFCB78BFF70B3BD283E1EF797DF32CA
-:10742000FE436AFCB78BFF00FDA4C78F89DD4FAC1C
-:10743000F80F39BA7E7A8AFF00FD0C3AEF7862C401
-:107440007FF0E8E8F67DC57FF822EEFCF11FFEE54F
-:10745000E22CC03605CF7F8A4914D9BF4CDC856B3E
-:10746000E3FFC97117C858F8578ABBA0BDDF6F305A
-:10747000E17AF5A6E0FB6B422EDE12F1178EC58C89
-:10748000BF10BC8AFCA2CBE5F80BD3051FE7F9645B
-:107490007998CEF879C3F429593C5E66992EFE425C
-:1074A000AE7C7E3DC377640A80635779E4711C111A
-:1074B000F230B3E4A3E7903D578F8D1E7F6196E0D5
-:1074C00047B18E2ED305DF8A457A3D3E4901799E2C
-:1074D00051764445BACE74B7AAE4D7FE81C63FB709
-:1074E000C4BFD902AE1EDF59827FB3AEE4FCD3E342
-:1074F000FD2AF2CF0969D928E29F1E6F3D9E7AFED0
-:10750000B3487E47C4CD286072DC85C95639EEC2C7
-:1075100054971C77E18A7439EEC2956E39EEC20F2A
-:1075200072E5B80B5779E4B80B578F95E32E147BAF
-:10753000D7EAE23E6CD2C57DB84B17F7E17E5DDC41
-:10754000876DBAB80F8FE8E23EECD6C57D785A1742
-:10755000F761BF945F5C7358AABFB4F688945F5616
-:10756000F786547F79F0B854BEA2FE03A9BCA2E10D
-:1075700023295FD5F48554BFB7711F5E15EF815F76
-:1075800013EF818F89F7C06FC688FBF0D79F7F719B
-:107590005BE47BFC2F7FFECD6DF81EDF20DEC1C6D5
-:1075A0008AFB102E8F11F7A1ABFDB78FFB9092FCD9
-:1075B000CF7F879F63E7E79B13E227E5D853BEFBA6
-:1075C0003BFC6B8BE4F7CC734BE4F7CC3976AECF56
-:1075D000E7F9E477CDD797C9EF9ACB6CBE6CC4437B
-:1075E0001FF76142BC37C78EFA52BCCF0FE1FB5484
-:1075F000581B9FC5F7A9903E87711F203D88711FBA
-:10760000203D84711F20FD3DC67D80F4258CFB004C
-:10761000E9CB18F741C5B811011137A246C48DA8AE
-:10762000157123EA44DC88A0881B512FE246348878
-:10763000B8114D226E4488E09CF01FA2F4A4BF85CF
-:10764000D253FE63949EF6B7527AC67F9AD2B3FEA7
-:107650000E4ADBFC9F53DADBB8119A5CFE19ED068B
-:1076600033F6CFE55893D319F6811B22E5B4C87ED3
-:10767000D10694D358F122E6224D5362C78B089766
-:10768000C78817D1D53E76BC88B4D1DF5FBC887F70
-:107690008BE7F2FA8FC68B985F2DC73358B0E6FCA4
-:1076A000F122CA6C45AB512E3579FCB7787E5ED598
-:1076B00053BC886D7645ACD74017B4BB802EB45E02
-:1076C000F7F0DEFE39C7C3B9B89FE8CCBDE8BC719E
-:1076D0000EF472119BDE3CAEC175DF739C889EE890
-:1076E000AAD57FB39CC72FF8B7F8F3C72FE81627A2
-:1076F000A2A7F802833E233DD9DB38113DAD0B3DF7
-:10770000D173D6F71C27A227BDDA933EFDE3744E52
-:10771000E709F1E78FC7118E0B676D39488D5D5E04
-:107720009ADAAA78075E30DB45FE93F65DE2DE98D2
-:1077300097B95DA9FC9D3ADA9BED7B1286337ABF3F
-:10774000EE625EE04FBCF8AEECDABF1FCFD36F75D0
-:10775000326F6212C583771B73701F36D28AFE9414
-:107760008AC68F5EFE1DC0B5351BE93E593BE0D091
-:1077700042769F3711F916CF6EA77D3A9E717DD361
-:1077800027F23DB3EEF71BB04AC4F9CD54A39DF6E2
-:107790004D9D5BF93D4F23BBE8BE89C9749F9A0597
-:1077A000DDC43FB25357083C3B31C5FA3E2BD98F5D
-:1077B000CB0E3F911F62FCBC32D26FD0A750F6D3E4
-:1077C000D4D99CC3F15D250B785BD0FE5E22E0A589
-:1077D00014C9FE9B0F17151EC273FA25BE52BA8735
-:1077E000905622FB739878378EDBB1F07D39C0A7B5
-:1077F000B449610F28DDDF919735DFB501F739CB4B
-:10780000837AFB9BE5A29C95B3380FEE7B57D4CBD4
-:10781000E50E87B8CF6167F65ED1AD75F07D134791
-:107820009F976E9E10D6DFE5A0FBB0CB0E2F3623C0
-:10783000B32CE932DD6C6E996EF1B9327DF4F473DC
-:107840007864FAE8E9973056F67F69F4D3EE1BAA1C
-:107850004CDC170DF27BA4DDDEE1376D233CF5F443
-:10786000D3D36B9443DC93E8A257913595543EE112
-:1078700099A18648BEF5F321D31E52F0BFFB27071E
-:10788000D7522B8F4345BD95CE413365096F178F76
-:10789000F301E3CA320FCD07DCD1A37F379EFD5938
-:1078A000C8FDBBEC1B486F2A7EEEF82228DD8AF269
-:1078B0003682FFFE02F9ABB4DF4D601E17EEA31A4D
-:1078C000FC56F71215CF05997BC9403C0F74517ACD
-:1078D000A778F7DB3E94D1BEBF21F4492A9EA3DDF1
-:1078E00099D73113FD0F554B5911AE5F3F72F277A7
-:1078F000179B443AC2C9FD339B8B0CCC3B1A7F8744
-:10790000C71854D0EFEAF21EBE1CEDD166939BDE81
-:1079100011BB3A5EBE9ECA47D1FBE80C43ED48C49A
-:1079200007EAD3FBDAF6E6779D8B23F4705BD3DDB1
-:1079300043F07EF1FD86E8EF7A4B1DDAFB367EBF21
-:107940006344579C8152C7188A47706736F453596D
-:10795000DC497CD4E47282A0FF73A5D309BF279BC6
-:107960001537FAEBA6196FF8C130C06FDC5195EBF3
-:107970002F71AF7BB4A8FF34F3A423BEE32E650AB6
-:10798000CE9F716F304F00495C5D4AF7E97EE79CFE
-:107990007608F935A519E409F5C859BB07AFCA8FB0
-:1079A0006991EFCB254EF11DC0FB85971C63A4CFD9
-:1079B0002E39A6EAEFC71871BF3FAE55FE3E41B75C
-:1079C000FF5CA7C99D93A5A2DC6DF9CA4878B5777D
-:1079D00030CF3A80DBBEA42F9DDBB67FC2C84E6C91
-:1079E000FFCA5818ED7EC9DD0EEEF7BADFCC487F2E
-:1079F000DF5F6AA7770ECF96965F80F6C5673FF187
-:107A00005D10CD4F1961A725F0F7E7DE043616E5C6
-:107A1000F05685D3BB36A328CABAA5C99D26879A36
-:107A2000FC6594C6F9A2DDD74C7672FB685269AE4C
-:107A30006246F9D9A730A46BDB3AC0EB3CEB768009
-:107A4000ADCB447CAA9A3EA67B58D66625EAEFF2D7
-:107A50003CE170F2FB80EB026BF1FEC5CD3089504A
-:107A60004F65986BB3A2C10FB02D64973EE070F3E1
-:107A7000770356114748ADCDC0FB086D4D93AFDC81
-:107A800000783E00F301F97BBFC94378072A18A3A9
-:107A9000FBA4C25FD76F26DBB639C2FEDDEB283808
-:107AA0008C727BD8C1EDC63E3E8F82787BFEFE573E
-:107AB00027C26FFFDC42FCEB2BEC4DADDD4907A785
-:107AC0004F89D37B00DBB3B264523E1E9FD3BDA46B
-:107AD0000FFACD81DE51EC2B6D5D4FF2313A9F48AC
-:107AE000B21B82A49CBC5EB74BBAEF1DA079A3CD9C
-:107AF00003165218BED7D7F49BD2AC841C20F7A330
-:107B0000ADF610DE3F4B2A837127633C0F2B87D7DE
-:107B1000A29E95FD5A208FF968DC337AEF8F8E5440
-:107B200084AFE93D4D5FDE9AC8F5D1AD77A9140F5A
-:107B300074ABDA6A437F6A96D73D0943D324A96EB2
-:107B4000BA97D2BF8CCFC3F89C5F2686ED0098E42D
-:107B500023BF362E88F69E2903E52905E9E5FBD0EB
-:107B600001E9F0431DCFA2B9E0B1B13EFCFE94D0D3
-:107B700013C2AE9926D6BB71EF19F83BCAD0E52CDB
-:107B8000F27D915E4F80DCFF097FBFE7FEF7548AEC
-:107B9000131AD60FA5D3687D62C6A10750CE26BCA6
-:107BA000C8F87194D00F2EF887F4B9E425DF7A4431
-:107BB000E3BBEA053DBF59C81ACEE34FB38D3A0483
-:107BC000F32D729D758AF55EE8919B8A07AEC7F921
-:107BD000A5C9D105B7788CBE083AEADB87FD948A3F
-:107BE00035FCDD9D837AE42523DE0F6B2F007E03B9
-:107BF0005D9EC4F902F44EFC247825F27D4BF3150A
-:107C00003694EF5B43935C33A04DA2B5889897C838
-:107C1000BCE4CFC903EA609C88F52414B05F578B9D
-:107C2000B29C29788FAB50F2F768BF8B070325BE53
-:107C300084F900721C798F55934FBD3C6AF2BB1ECC
-:107C40003758787E871E73488D4A0331C8C2B6BA4A
-:107C500050CF6AF6E5FAB03D9748FB8CD5C22E5A54
-:107C60006F9F662535B03F99D6F3D5B83EC1F8571A
-:107C7000A7309A07DA38F4F258F5B9810523F607E8
-:107C8000556A07DDE3ABFADCCC827D70DCBE493897
-:107C90006E8D2E23055DF474C8768AFDA6A0476C10
-:107CA0003CF35D787F36D1EA651B09CF4974CFB9C3
-:107CB000219467C5F5F6361D9EBDC06F4E34FC5449
-:107CC0007B0CFC44FCB609CCF7BB5690D7FC9BEA76
-:107CD00032F87AC15E4D8FE09F7EDE8C6DAA3E60E9
-:107CE0008E982F9A5F573F4F4634B36B90EEE34226
-:107CF0002AC3F3D79EE6CB2762BC55F19C5EED7399
-:107D00003A06A37CEE507DD54EB22F5A0D18F7B728
-:107D1000FD6946F3D9B3FFA493E21BB5F4EE7EBA36
-:107D2000664769F693BE9E663F697A57BB1FBEDD04
-:107D3000E9F363FF4A13C8278C7FBD8BEF8BF63ABC
-:107D40007CEBF07B3C8C018F92586E288BBF7F952B
-:107D5000E53F96BCC7EBE4B901E844BF9305FA7F61
-:107D600090D21D0FADFF29CE447EDE02B319F5502F
-:107D7000BF7CC63BAB64747FB2DF70E6C3F5A95F1E
-:107D80001EBFF71714EBF636A16FB574AFA3E87EEC
-:107D9000C4DFA4B28025EFBBE38DA8E27DECED4EFD
-:107DA000EF7D287FD6422F8D23D3C53C687F66AAFE
-:107DB0000D0ABE9B4C5AE956F83D6CD6F58E09E08B
-:107DC00065CE7017A09C64E23E1AEB37478FA3F58F
-:107DD00084D324D9991E168E53F504F60B76E6410A
-:107DE00033E0DD678616F74A3BB7F12848A736C768
-:107DF0001C42BAED5385DBE3899C5EFAFD00121E3E
-:107E0000F15345FE3633536D49ACEB77380D56B21E
-:107E1000E3E399A701F5D2CBCE6C712EEAA9C1FCA0
-:107E2000BFAB1DD6C4A15D727CE7C4591E15AA382C
-:107E30002FED1C8E7B2690E7C3886FDBC4CEC1B7C5
-:107E400012313A0670B9F11AA5B8381AFD9B4C12D6
-:107E5000FD6DB8CF8ED4830E33ED23DB94380FCE77
-:107E6000B3B6E50AC753B18AB841AABCFF17FA48AE
-:107E7000D3AF9DCE2CC23F9E05681FC0AC1E2BDD2C
-:107E80006317F8635C45F2EBEC8D0F6EC7F3285D6A
-:107E90001C457D9CC5C98BED74EF62CB5E1BED4B21
-:107EA0003B8BF8F97C67B385F46FAC799A86CAE0AE
-:107EB0003CF102816E1D48B734537522EABDB4F916
-:107EC0007CFEEBE9D18E03C5FDCE1F4CC168EFD51A
-:107ED000B5343DBD6F31DA65E919E9946ADFEBEC41
-:107EE0006AD47BD8C604458AD337047A14FB1C6352
-:107EF000027C3FE7FBE36B5ED675AFBD2E8ED3AF42
-:107F0000D3373EE161942B1038FA3D01ED5C53EC20
-:107F1000E7B5F8495A3F5BFCD6620CF959B768BA25
-:107F20000DD78114E6BD721E4ECA2D26B693DAE532
-:107F30004AF75DEFF58F2CC6F7C99909FC1EED27AE
-:107F40005BA6D27BE654B6CE3618E8505A64F0A051
-:107F50003FE0DCA2379D06909F45992DF928A7099F
-:107F6000265F66C218725DD17E6359893918027A1C
-:107F700025D78142203A06AE243A2E3444F50F67C5
-:107F800027F07DE75B623D494F1F50BC645464BEDF
-:107F90001FD1559323983F194B4677C5C3047E5E86
-:107FA0009410651EB49B5813BE97D0F451B2103391
-:107FB0004D1F6A729C8CF303EDB822D04FD2791F0B
-:107FC000544DEDFA3D43A5F9852FD08E755E3A8963
-:107FD000F40DCCDB1A92F35CAE3F6DA8CF22FC56B9
-:107FE000ED7B5FEF8FEF98DEFED9C70E7CD7F217DF
-:107FF000B5C381FAEBF42D7F72601CB0B76FE1FB63
-:10800000E41B75F6FF55423E8209455390AE0BFCCA
-:108010007FCF8FB4D7D81AEE7F5E1E94DFAFE2FD1C
-:10802000EF483F604583FE3E4080C72913BFCFA97C
-:10803000E7C33AC187E5BBB69933DDD8BF6F0EF60B
-:108040007F5AEC6F4E373AE83D8586CFA25D23CD4F
-:1080500068F3FFA5D922DEE9B598B85EF6CEC0F781
-:10806000393E41373D9E07F7C513BCA5F7F0F7AB86
-:108070000BA1AF35A0177DCD3C8E927E1C4BDF76D9
-:108080004F433FFAD24D0AEDE3B0FE2DB04EF8D685
-:108090006CA4773CFA712E0CC8FE1C7DBC466D3F6B
-:1080A000B04CF07F09FE1A6F4E94388ECDFC3DDD4A
-:1080B000329D7DD17928271EC7BF2641D8D9F9EC3A
-:1080C000128CDBB9E7507642B478185A7A569CF78E
-:1080D000E3BD7E4C4FFB19A55312DC3C5E57F39178
-:1080E0009B51AE2A9B76537CC47DC1F7FA8C872ABC
-:1080F00005CD5F1851A80A843D365FD8637B189779
-:108100001BB0A337A3FC5FFEB9CE8E16E3BC419330
-:10811000FB4349243737E0B886E377F59368E3BA41
-:108120003B417EFFD5DB7169E3D1C6A7955788F740
-:10813000E7FA769A9C4F1172B76447F186BE408A7F
-:10814000F57BDF1F20E2C8519C2D4D8EF472B24C9E
-:10815000F02D2C0FCD77D0B834BE81BCA78B7749DA
-:10816000E9E8CFE8492EF4FC6F33B50EC0F9AAE771
-:108170007F5B8C739FED09FC5C6389DB3B0DFD2B02
-:10818000601E6E7045D80FA7D5DA833FC579B483DA
-:10819000CB71E4BA48C6D28B265A675739DC698955
-:1081A00076C1B771F87ED112C07A5A3FA7FC35B3B9
-:1081B00006D27963EDAC8103E9DD06A55A79E9FDC4
-:1081C0001F3BD13E6DCF65E45F6873C8F81EC1C523
-:1081D000660CA69CFE2BD596AFDF421DB4A385E2AC
-:1081E000B79EFA4AF827BEB214461BE7D9046E07B9
-:1081F0006AF74F6E14F3E8C666FEDE6ED1D66233C0
-:10820000F901D6C8F7355E525CD332A1A9AF61A49B
-:1082100019F9ACE7C752CF15F40EBC1B5FD8EDC4FB
-:10822000D7A5FA776DE21ED302211F335D6E61A7D9
-:10823000F9E81DF1923A23D9F7CBDCD5B4BF59A1A7
-:10824000467F8F35C66538EF78F4E358D8A890DEBE
-:10825000D3E3BF6CC7DA0D7D198E9F8FAFFB384219
-:10826000FD48CF8871B2D6CBF9BB4CB16EFF174732
-:1082700094BC5700800000001F8B08000000000025
-:10828000000BB57C0D7854D5B5E83E73CEFC243395
-:108290004926FF21413C21111212E2908400017114
-:1082A000F24BC408030182607540518490207A5BD0
-:1082B000EFABB79990682DFA7AA358CB6DEDFD0618
-:1082C0002BAD0A4880A08126E9041403040D820A1C
-:1082D00096D68014B1053280B5587D8FB7D6DAFBBB
-:1082E00064664E92426F5F87D69D7DCE3EFBACBDED
-:1082F000FED7DA6B9F65ECD94B720E630FB7CB8C50
-:10830000E53356FBACEC65A98C2D63CAE9BE0C467F
-:10831000BF6BA9F85F67E59204C6EEC53F5568DB01
-:1083200057553278AE5CAE9985CFF56F90995982EA
-:10833000EB1EEF53C971D036498E4618C71E379EC3
-:10834000EEB33066817FD746D33C8C25E0FCFCD76A
-:1083500023B1A75260FEB38AFFBD0878EE2CC0E1BE
-:1083600081799678F873F47EF8FF32C78C2F2478E1
-:10837000DFFDEDF229730E5E5D6D32C0F8A52F4969
-:108380006C1D8CBFFF69DD78B12EFD3A1EDAF0A3BB
-:10839000B9E91981710F7B9F0BE9C3DA5456C0D834
-:1083A0007D023EF6EA7F05EE73F84DAE08C632ED6B
-:1083B000117167B3A05BC0265D4B63ACCE1A99C345
-:1083C000A2A03533C2233B64F46E02B8D644C08207
-:1083D00001CE355BA3BD1EC4E3EA68C646C0B8F64D
-:1083E0008D26B70DE6C4DFED8C9DAB6F9E9B9E0E78
-:1083F000EBAF7F7A6EBAC2D82CBB9DB189408FB6E5
-:10840000E7685CB7E29A6487FE2A4BDF8FEF5683FA
-:10841000F03899D363995C696286C07CFA7659B367
-:10842000F1CBBEA0751621FC56F86312C02FFF3D9C
-:10843000F8D5C4685B006EFDBC7FAADF1002F74A66
-:1084400085395B6C81F568E326DA0DB41EFDF37A9D
-:108450007A30E6A5717ABAAC443A04D117E15400F7
-:10846000AF3D1D56EF5A89F888E0F6748411DC1789
-:1084700093D6CD3D93C7D8617C00E0AE1DF132F5B7
-:108480005F515C6E7B3C5EF48F728DC76762199B97
-:10849000323CDE6046C6607C2ECE0FE3768539F333
-:1084A000988CD75DB1C807D31BFAAA2C40AA3AFB17
-:1084B000A40A05DE33FDB9BEAA30E83F629FCCFBBB
-:1084C0009BFA8E5A1C8C35B02915A5F0FC63700FF1
-:1084D000E7BB5E9B6F762D66C0573580534B0CB45F
-:1084E000C7C6BC8DF256D35B59214542CB984FCAC3
-:1084F000057E7046FAAC39D4678530AE33CAFD1FAD
-:10850000B8BE55579B2EC938EE98C2E5A53B8EF0F4
-:10851000A000EC61F05C53B853B503BE9A622C8E98
-:10852000C654BAEE098BC1BE535583AE6BF4C0E797
-:10853000108E2603734643DB75604C545FF6F0786B
-:10854000EBAA57AB14A0FFBEFA0C6AF5F78B4CF6FA
-:1085500074073C5F6460EE16DBE0FBAF22BF109D4A
-:10856000D414A4736DB789E41C7F12F0FD2AA1878F
-:108570006A81405100CFAA63CC171E89E3CABF505D
-:10858000B06D95D8E910BE6281BE3C3CDC37DAD6CE
-:10859000E27C4A309F703C152BA9554AD07B4B6D2D
-:1085A00099217D39D19081EB6172B86313E0574E08
-:1085B00031ACDE01EB976F8616F0A1D81DF2126880
-:1085C0009B4BA6CB4BA16D34B2852DD81AD8F26047
-:1085D0003C750879D2DA4B76D76F90EE17DEEF2D27
-:1085E000B0929E1A6927F916EB6D941C3ED4439EF7
-:1085F0002EE6D804D79A6417E37CDCC2908F7F2FD5
-:10860000E671980D3B55E0D7F7EC0F12FF3AA20C3C
-:108610008FA642FFA3E615150AF0AF23C5702515F6
-:1086200078F478F34ADECF325C190DFD4F9A6B78FF
-:108630007F2A4C99CCD8C9E655159E6C9C97EB3196
-:10864000B6C59985EF510C12C9A9B2D7E46D843F24
-:108650009B22393F3519812F6370BC4AE39F6A28FA
-:10866000DE6C05FE578A9DEA6A1BC735F2C3FFB46C
-:10867000D5F0285B0DAB118FD822BECF88756B74F7
-:1086800060ADCEAC39A8175A9C59732310AFEECF0A
-:1086900011AF793DBDD3510FB77EF049813B9BD3DC
-:1086A0000BE7C9EB612C12D673E1AD9B36CA528041
-:1086B0003E97EC45E7515F4BA0A61F877549AA9DE1
-:1086C000DD0372D7E864AA09D695C85EB2A3FD306F
-:1086D000207D4005B532AE5F3AA35C5FE2736CA4C7
-:1086E0008FEC4CB5DDF515BE5FD3CFAC3766483D9A
-:1086F000ACD757A69CC765067C1093D2767C29EA36
-:10870000F3DF9A1DB7A8088F933D0E706C33308548
-:10871000C5107B642870DFCAC21DEB50DE1D2CC95A
-:1087200003F2856823E0E01707F6D02864485B076A
-:108730003C5FCAA09D8470DD4AEB92919F263097E2
-:108740008C7AAB8079ADD8F677BC9584F87A3E8C7C
-:10875000DDE782D6F22A737A83F4467EB444F89F2A
-:108760001563A436DCD83217F934FC12B3A31FD03A
-:10877000FF0B9382F38360DC89D71DFB0D0CE1FCBA
-:10878000B5D16B8F82BE3F53515F6681F9FA059D6B
-:10879000B5799F37A999D1D0AF8A91082FBF2EE222
-:1087A000F6D8FF85C9FB722AE2C7B2DA1B2457E369
-:1087B000A3F9B8BAB8E2B1D1F07C4B4738C3F74F50
-:1087C000EA0C3720FE376FC90D433ED886B881F5D5
-:1087D000C798ED8FE07C315700DE54BAEE24BC2AF6
-:1087E000EA8428C06BE14C9BBA0EF0FEEBB0969980
-:1087F000C8F7FEAD06F632BC629BC93107FBDB2E23
-:10880000AB76D4B3BF4E6D09A7F56C35D07AB6857B
-:10881000FBC7AD01B8D7652815089F62650AEA5FF6
-:10882000C550AC3E02D7A74573FDA8E9E39A689509
-:10883000FACF4BF0FE5C1C5744725326DB48DEFA3D
-:10884000FDCC6B86F7C4CFEB95911EE173809590BC
-:10885000DF159FCC703E17121A5A9BD1AB929E75B2
-:10886000DA9600DDA70B3D3BFD644D258BC48EE3FE
-:10887000D854986F9FCDC8705DB7B13ED902FDDB6B
-:10888000AE32870FF9E7AA427E981DFE05FB7B6595
-:10889000629E5F494C898271455FAA0AF257110BAB
-:1088A000F5DBCA36947F81F6ADC4A2BB8EFE5C2494
-:1088B000B64AE03ACCB3285AF861A3D8A86BA4CF43
-:1088C00060D6046147555C7FF67FE1BAFA2B4C0E07
-:1088D0005CFF769BF3E3A9A8077B8D6C131B5E8E70
-:1088E0007E550F1A7D0C08C7D570E68D253EB42144
-:1088F000FDC76D68F684C17AC7A5F3F991DF506FA3
-:108900008CFD455C2CEAED8868AE4FB456E32FE44D
-:10891000237B14E723FBAD01F9FB5E742A8DD3E4BE
-:1089200009F90BE7D963F42E760D6117812FBF8704
-:108930007CB9DDC62A90CF9F19615988F2A4BD6722
-:10894000B7E07B7DFB54C39A2E23AEFB2FA0FF0123
-:10895000EED2E4ABA660FBDD15C7E12D93BF25BFCA
-:10896000FA62BB44FE7C423BD7D7C17C316268BE11
-:108970007801F17A3DBED0C7011A5FECB81E5F7472
-:10898000FF637CF18B68E1DF0ECB17DF46E2FA1F55
-:10899000EB2849647FC78F69137C30DCFD2956AE14
-:1089A000D7F4D7DB053E779B9AEFCC41B9BFCBE03C
-:1089B00040B906AAA7CC05FBB23B9C3FC794D5693A
-:1089C000D8DFAE703DB2BDDD4C7A64BBCDED267B09
-:1089D0009D6461E82730C5DDF77DD47FC916755DDC
-:1089E00010DF3E2EF4408BD137E573F47F0F70FA21
-:1089F0004EBE2B5736C1B8110F70B9CE3F67DA287B
-:108A0000C33CD53145BE6818DF17CDED62DD1918BE
-:108A1000057C597BC644FAEDADCE23E54E1BF937F4
-:108A20004EE4AF497B8E941767E378CE47DDA2D53D
-:108A3000FA53704D3164768E25017E5DC24E4C61D5
-:108A40005C0FB9903F72027DE634523CA6F141358D
-:108A500063596827E6F639CA908DAA2A42E95BED88
-:108A60009B4971DFFCE3CEB20858D77C97EEBEA0DD
-:108A70007FB58EFEE007FF01E564D5E6DE4E1BF212
-:108A8000ADCAED698B697516F77B56A7A1FFAFC913
-:108A900011FD004F2DBFCF78795D901D5763F83AD7
-:108AA0009F752874DFD367F2DE0297FE37E3CFB5F8
-:108AB000087BF3AD90E3DCC7DE588CFC9BB7DCB9D8
-:108AC0000FF1BF284EA6EBFFC97C9634A48F43213B
-:108AD000FFABC5A8967C2E05C631C5956183FB7B8F
-:108AE000E2C3F3F0FDD531EE6B4827A6F8BBF1B930
-:108AF0004985B9792857B6094DB1687F34B801AEB8
-:108B00008A4DB6001C1A5CE785FEA98E59720DF1DC
-:108B100080CFA15E693B75D682CF6B746FE9B8C414
-:108B2000E91D447FA47780FED27DD8D7F06011ADD7
-:108B3000D6FFE7E9EF1B89F41896FE18F747FE8F7A
-:108B4000E83F2A6608FA833F958ED7357FAAC50489
-:108B50007E7576A0AFD1BDDA5E44E31C265819FAC3
-:108B60004F9D1057A21CBAA3D1B9613BEDFC5DFD2E
-:108B7000BF3F3B0A5C4036292686CB93C93F06FDA2
-:108B80008D093E89FCBE0920F0F7909F3592F49D37
-:108B900043E0879D95A4B319DC05BF9682FE9F2F05
-:108BA00016E56082B9D287FCBEC33A3D05FDB75CCD
-:108BB000EBB434E4A737331E3B8426E7CDE4E53B32
-:108BC0005F51037E8EA6D7F68969B5F797C770FA0D
-:108BD000DF0E6A16FD3D740D83E1D0F4379205E196
-:108BE000907CD5866B56D2C7ED7D80AFDB110EC071
-:108BF0006B97C45A517F17199C7125E88FC5FB14D8
-:108C0000EED77D3D4A05BEA96C7FF738C25B69B1DE
-:108C1000F930DFC21CC6F37D41F912BD9FABF925C7
-:108C20009ADFAFF92D5A7C89FE0DDECFC7EB00BF6E
-:108C3000DD0C00A2FDF159BC0DF0FEE72FAB994E03
-:108C400021AF0AACA352AC6336EB25B8D8B7D7AE88
-:108C50004D03FACC12F8A8EC86B83007EF3376173C
-:108C6000E0E12E85C78B7739203E0CE2A3D99343F0
-:108C7000FBF89B9E1098E77AE3F5FA7FAAC817FCE9
-:108C8000B371A6D676831D3A0D0C70B09EC734859D
-:108C9000A3658F82F1803BD380FC5827EC1A84C9EE
-:108CA00043DB2321AF8586BE1C07E0B76BCF37645B
-:108CB000FFF6EEF9E623F4E7A67CA130333C5FF83B
-:108CC000457E14EA07E60A9DB7EE8FAD56C6AF1390
-:108CD000FFD48AB5EFAFC78C18C267A1F637E79FFC
-:108CE0005F8FF37D7946E1BC2DDE5F6E72A7DB6D91
-:108CF000D8F2787FBFC4FD1DEDFE7E23C00DD737AF
-:108D0000C568717FAF42F919F89983E87C17C6FBF3
-:108D1000B901BADE75AEE20B2567307DF0F7FF23AF
-:108D2000DED7E2FCB744FCC0F69D30A900D78CD654
-:108D30004714F4A36724C9CC19F4DE3B542B730603
-:108D4000C5FB6FC4E8FC907DAFAD9F0576A4AE4730
-:108D50007684A1BCB66F3F9483FD5ED9611D828F7E
-:108D6000F4F89DD1FE8882FC9F10CBE5E67AEF2FC8
-:108D70001C077C722BD29D911F77B1402239D2D330
-:108D800077EF9E9FC7F6650F8FEFE1E8AFA7C36F40
-:108D9000CE1747215EAE470F3DDF76C23A3DB03E6B
-:108DA0001FACD303FED6DE7A3BF5DFAE4FA2BEC6C4
-:108DB000AF751DBF8C457F4DE3D3B258CE37537688
-:108DC000AF8F65B600BD347C5D1474AB668EF9B3AD
-:108DD000E0CF5D922382F48487F5261504EC55F5E7
-:108DE000B172F233347B552D671B51FF6AF60AD3FB
-:108DF000C2A8CFF4F6697E7A9111D5AADE2EC102FF
-:108E00008DC8BFD50B43AF57F4342B11D433109D0D
-:108E10002449E043F8D51A3C1F3217C1ABA7A70677
-:108E20009F1E2ECD9FAE1674837596E1D2E7AA459C
-:108E3000B48E417655ACF746EDA9393634CEBA72C8
-:108E4000AEF4FD9C21F87538BED5DFD7F44039BEAD
-:108E500020975A0FFA1109B10944AFF2AB26E60484
-:108E60007BC14686B1CF82F3EFAF6492BD7B54D80D
-:108E7000DFE1F8A6F6AA81B96303FC636C7BCE8AB6
-:108E8000FCB35B69B662DEF136DB9CC628C053E9F1
-:108E90001F8BE7A15F57D76760989A2A6BBFB40F03
-:108EA000E3F6BAE3CC81FAB0B8BDAB04F9ED6DA539
-:108EB00057A638FA4BC69E0BF20FDBDA1BADE83F24
-:108EC000B5C5C914A7EF8FE6FCA8DD6F89E5FCD70F
-:108ED00076E6F22CE710F73F13F74B4FE51AD1482F
-:108EE000F6C74750BEA1FC6903ADBF54B25755A2A7
-:108EF000FF718791FC7A885BFEF07DCC37B599B71E
-:108F000063AABEACED878FD881102DFFE7B306337F
-:108F1000E60FE6488E97615CB9EAEFC27EF9BC5471
-:108F2000DA8799F47F65F25FFD774B94F72807762F
-:108F3000C17EF93DA95ECC3FEC9178DFD3C1F3FE51
-:108F4000CCEE899D05EFF9A03276C23AE229AD7FD9
-:108F50004BEE3A261838289E7A6C17DF3F7AAC4CD5
-:108F6000A2FDA3327B0AF304F155F9D340CF3CE0D4
-:108F7000C7F6C462E4DFAA0A997983F87ABECBCA3D
-:108F8000BC41E3F7877178FC92D98BF9124D5E678B
-:108F90000AFEAE5E181B327E0EE37EE242D66C44C1
-:108FA000F9AE13F0D415013CF0FC4C11A7DEED4EE8
-:108FB00009796F256641606856DC68B28FB3BFECF3
-:108FC00023B33A473E796C31BC876570F9D0E4AC85
-:108FD0004CAE69223E48921C181FCF97C0AB9451EB
-:108FE000DF85CAD1ECC9A1FD394EBD7E089577BD9C
-:108FF0001ED7E47C7E876CC4387A7E91E46043E8B7
-:1090000003BD3FADD703930C8E7730AE9E7BD54921
-:10901000FC35480F9CACF887F4C05B205B93415E45
-:109020007FA4E9839BD84DA80FCAE42DEB913FFAAA
-:10903000C1AE9987E00FCD2E68F17639C827F203CB
-:109040003BCFF725CAAE829CC606E2ED01FD007E4D
-:109050008363087FE657B16921FB4903FA22C86F91
-:109060003016FCF37E4319F88BA65C846F24F3E47E
-:10907000919EA2FC1EB43ECAB3255DA23C4A1DC40B
-:10908000F114CFB35F125CA8D7A49800DFEBFD0901
-:109090002D4F3B42E409F4FC3090B79B67F4229FCC
-:1090A00069FC506EE772513E4FA6FCB99E3FB4F783
-:1090B0005D8F2F7C12F085F477F842C8D38DF2C50E
-:1090C000218D1FD259FA8DF083C6071A5FE8EDC5CE
-:1090D000415DDE65387B71F23AF6E29D0C23E9656D
-:1090E000BD9DD0ECC28138AE7FC7C7F27D8A999909
-:1090F000F36DE8578C407D80FE9EB0370379A30D59
-:109100009C0FDEE95BAA486837500FA406E15DE4D6
-:109110004D35BEAB7D9A51FEB052E89F8B1D3C9FF2
-:1091200056572A7B2DF06749FB73EB79DF48F9B678
-:1091300022A54BB1C0BCB31D9203F3354E917F9B6A
-:1091400075D5E455293F3FF47E7A95E01B8C73700A
-:10915000FC6CA7E4851074901EAABACAEDBE5E1F0F
-:109160005589FDF22ADD7EB9294ED0F56676F3BF2A
-:10917000D2EEC7C72570B919868EDAF31A1D35FAF3
-:109180004DC0B1283FFBBE36A911DC3F46FACDB831
-:10919000AAD03CA3E242FD962FCFE7FE27C574621A
-:1091A0007C5DFB25937BFCF0F05FCF2FBD59F3C3B3
-:1091B000855FAEBD7726C8780A3A863AFBA1BDE73F
-:1091C000BAF6423CAFA7D3E4B8D07842A387A6470B
-:1091D00007E15BE8D9E1E8753D3DABE9B37FB59EBA
-:1091E000D5E6D7EC80F65EBDFE1D2E3ED3F4E953E6
-:1091F0001B0D9417B94DC4C1B7893CEB8342CE9780
-:109200000B7DDBFF178B01FDAC6D9DDC1F7198EDB5
-:1092100087D06F08E4F3385D9F8C601EDC2F674AAF
-:10922000AF85F62F8B81A4B87F99CCF72FB7283E56
-:1092300017E96987C21A405EFE2AF2164FEEF52C36
-:10924000463DFDE4E93106DA47577CBD18174FCAA1
-:1092500055683F28DAAC52BEF76287D98ECFF5EF5A
-:10926000FE5E9711E7F90B7360A8F6768779603F89
-:1092700006F54299DC23635EBEDF0FBE388C9FB6D5
-:10928000D05782F1CE6DACB711E3EA42A4E310F4FB
-:109290007B55675FF479FB920EEE279544F0BA9FF9
-:1092A000E980467CEFF43613F985D7CBDB177DC90F
-:1092B000C85F1A94AF6FE37A0606119FDC68DEBEC2
-:1092C000107D3DE0E39FE8F40E1B267FBFCDC4F781
-:1092D00073FC478C0CFD5E762E6EC8BCCBF5F2F8A5
-:1092E000BB3BC39D6A24EEBB71FF7C7767B253CD55
-:1092F000197E7C4E9FBF18F395DBB6CC55284E14D3
-:10930000F9CF41FB223AFCED90589315F369ED8EAD
-:10931000528C3F86DBE728F63B69DE1BC51B63CD1D
-:109320009CCEA27EE9762163DBCE863B91BFB79DC2
-:109330004D76223CBB057F6AFCBEFBCCE570DACFE4
-:10934000343955DC07F6475B1C2F13BF723E6F198B
-:1093500031C68BFBADDB853C6C0BF71FCC8A0BDE7B
-:10936000CFE0FB179DF59EAA33E9B4DF2D61BE5116
-:10937000DB27F680BC505D4E0C237E32B21686EFA2
-:109380006D74B29F633B7D9A1A85F8BE1CA7ED47AA
-:10939000AA519467F8F64A816BFC60BCEFA877513C
-:1093A0003D496BFDC22A05607CB3DE4D6D5BFD72ED
-:1093B0006AF7D4AFA6FB6B0F453E8E76BFCEB9A041
-:1093C0004A09D21B9FC5F3FC526ED6E912E473F62C
-:1093D0000D6318EF4C7FA24F463D71FB555847482F
-:1093E000DD887219F14CF9CBB4403F555A12867C96
-:1093F00079FB55E8078D97E2A3391D9A94A65B0A7D
-:10940000485A881FC2E29D17E3E0FA0FED2E7F5CF9
-:109410003CF241F5BE0B8CFA97F1FA0EE96EF902B7
-:109420008CCBF31551DE380FF3C6B934ED62C4DFCF
-:10943000C42E13ED7B6BF9DB5C31AFF3ABD03C7228
-:109440009EC8DBBEC9FA289F9C6F81C0CA8070711C
-:10945000FA39A5F94912E6FBE24D0EAC579898E6A9
-:10946000CAC37C6B573CA3FC695757C24815F0E050
-:1094700054785ED7A9E575D9DFCFEB767F1AE9215D
-:109480007D057E0AEAA7EEA3910E1FEDFF59C8FFE6
-:10949000DB810F627D4338AF1760F3E6511EFD7626
-:1094A0000B5F07D89FF878CAFBF9F61D86E77E7B2D
-:1094B00099F17DC4DE93B43F5D62C84CEC0338F78C
-:1094C0004963A3B07DF1D3C86C6A8F469E47FC7494
-:1094D0001AAC2ABEF7C37A56857567CEF76DB49F6E
-:1094E00031FD7D9B82EDE1FA3EAA477BBFFE1CB5B4
-:1094F00047EAFDD41EADBF4AED3B701DF9E7103CB5
-:109500008F6DEEE2087A6EC7A20813C2DB19C9B6E6
-:1095100068EFC17A335FB8AF1593F9EFC57FBECE60
-:109520007213D83BB37BBC3481B113F19FCF54A0ED
-:109530007F68C6A87FFF0BDCFFDD4F2EACB3005C5D
-:10954000F38EDA5A7BA0FFE94F2EAEB3A19E3D14F5
-:109550000ECA0EF546FF4190749687363D99710507
-:109560003B19FAB1A2EFE99F590A245F50D297C57F
-:1095700080B5A6FCC43FD302785C6075FF1BF64D36
-:109580009E976696DE847DE6C17A2EBF64A4F89E1F
-:109590008D94E2B07E6599DD7D2C3EC87E3BA53F73
-:1095A000D2FE51815362D1714457DACF62F653B182
-:1095B000C1F2B6CC5E760CE971473CDFBF9A384DFC
-:1095C0007206D749E8C74D3CA396229D0ACE95372F
-:1095D000613BBB229AFAAE85939A509E4B6DC33D78
-:1095E0005F42CF2F8837127F162B52487D887E5CD2
-:1095F0001E3013FAC7FE03E194179878CCDD887506
-:10960000A36549A9B9B2D0798CFAD11B711F6D62DB
-:10961000E587A5B1283F36C981E6A180F535C5C6E5
-:1096200061FD231644E1BA9E2BC1FA9D89AAE4404C
-:10963000B41539BB5AF1F9224784A308FDF1636AD6
-:10964000299A9CA3CA84C3F9306E46BAECB0C044D0
-:10965000477D774CBD00FDA28C28CAE31629ABAF2D
-:109660001CA67E84A341C5756CFC792DCD63267B39
-:10967000BE6356C97F20FF14BBA228E7576A3B355B
-:1096800037B82E0CD64D7017D9656F9884FCFD83C2
-:10969000523BF4778C9218CACF515FE69FE97E77F0
-:1096A000B81A0680EE30D94B71BE1D26C9BE96FA97
-:1096B000AE121CEF196354314F541EF745C8FC33EA
-:1096C0004AA5296710FEECA80978AD62E4A590FBD5
-:1096D0003D8BAC64272ADFCF267FA867510AD98B40
-:1096E000CAF7A71563DB63E07E7AE5FB951574DFA7
-:1096F000C0E3DFCAC5DF718A3EC5BB958B5751BF3A
-:109700004B4AFC777CDF95ECA85CCCA3CD4CFF7A70
-:10971000AE12ECFFADCE24F9CF1579BC2243E6FAA8
-:109720006900FFA307F83E4465B6145237372BFF94
-:1097300054483DA86BDA1721FDB9A59742EA43E7E3
-:10974000557E1DD25F304FAA0A1E5F7A209FEC6BB8
-:10975000BEA85FD2F24B458285DEA9CFA82A05B903
-:109760003C00ED03A01F8A7A45DE55E1717506FCC9
-:10977000433D586AD3E577994AFBD915DD7CDFBABA
-:109780003CCE783AD83E54C84F707F41B7FEDC03D8
-:1097900046B293B9D132E5AB34F82A46863EAFF9EA
-:1097A0005F1502CE1D0677530CE5C79CBDE87F68A8
-:1097B000F06BEFD7E0AE90EF29A5EDBFEBC0AF8720
-:1097C000170025FF4D0FC78178118780BF41FE59D3
-:1097D00037AF4B835FDC50765BF3CF2B414F4507B0
-:1097E000EB299B1487F576C3E9296DDEE1FC306D2A
-:1097F000DE6576173DEFDCFAD9D14239A89F7A2A87
-:109800003626B8FFDA67EB43EEC79FAA8A0EEE6FE3
-:10981000FAAC0AEF4F57D4461BF0E34126393CC857
-:109820009F3DAA82FBCF25C79C4DD8969D74639916
-:10983000299B71C6D384EDD4F3DE1E33ACEB8E0CC2
-:1098400059C5B85DF33FF4F09A13781C72F0AA6A18
-:10985000C5FDD31D1ED58AFEFB8E27542BFA1F3B58
-:109860009CAC02E331679A6135FAF3CE2C5E6778DF
-:1098700055E8E16FE2F9F35A7B5A717F837A11EB75
-:10988000C2D127A8FDDA4F75E007D1AFCA1EEC5749
-:109890001D54BC367CDFC127BCB6E07DC21BF5ABD6
-:1098A000FE8C363A1EF96C4E887C9658EEAE0A96BF
-:1098B000EF32FB9290FB9FC6A904FF8CA48743C69E
-:1098C000DDA13E12D2077F3103FD914613A33A5921
-:1098D0008F81D7C9EAF1F8A8C0A3C36647378619B4
-:1098E000E354AA6BD38F739470FCE9AFA727F0B849
-:1098F0006823C80CB6F72470F8F475B1FA3EC47C3E
-:109900000B713E983909F9DC61355C0157973913C1
-:1099100092EEA47AD93CC3A369D0AF4EC8E2FDA9A8
-:10992000869D581F7B774236EFDF6AC833821FF06F
-:109930002B36FE4EAC07AF0D13759D0F24D27E98CB
-:1099400016DF2886532F2EC638738F9161FEFE19BD
-:1099500013D8BDDCC0BEB9D5CCE352AB89D76D3FBF
-:10996000957AF429D41B6A987B7A02F951C52AE2C8
-:10997000EFBCDD42759D8FED2E4B44FADF93C0F3B3
-:109980005C593BA726A17EF917BC7F56C2C4E1DF14
-:109990008F75BE38CFF91D59E47F67DD0CE895025D
-:1099A000F887F098AE87419840E725983309F36C23
-:1099B0008DD1269AE79E04CE7F37DA0EAAFB8D3230
-:1099C000ACDE0EEDFD82FE0FE07B095FFE51737091
-:1099D00063CEEE1F35773CEF237D6539D78F7EACA4
-:1099E000FF3B11B4AFC246FA69FFE5E37BB21CE866
-:1099F0009F7E12CEF1B7D03BBAB14FC5FA0DEF4DF5
-:109A0000582F9191E8AE453C2C327B6F21FEB1ADD1
-:109A10008EC0F96FB41E78F07B218004FA544FE1B8
-:109A2000F4D1DE0B38B5A03DF8589C03D1E080F7A7
-:109A3000FF00F9408367000E5D5DB89667AEFBA33B
-:109A400081F20C7512E83DE8EF3CC91C1E98E7A2B4
-:109A5000E6AF8BBC266E45E17BA61C5E5A62833660
-:109A6000BF6D258F737B95903CD7A4E38A7EBF831F
-:109A7000ECD654ED795D9E71AA886BA7EAE2DA17FD
-:109A800013849D4966C9C1798035226EB8DC333AAA
-:109A90000AFD4CD45132E0D5A4CA6C724C40CE5B66
-:109AA00021EE674171BFC667E38FD9EF47B8C71F83
-:109AB00063F7915DD7E61DC82F70BC5C3ECEF132D6
-:109AC000A12FE3A7D3A06FEC3632AF1A584F21076E
-:109AD000955DC6FFE078BBC98B75CB05077E99E71E
-:109AE000834BE624035383F010A6863335482F5A60
-:109AF000336242FAB2866F61CFF3C4FC118EE490F8
-:109B000079F6C49477A37DCFB32D27FB1E357974E6
-:109B1000C83CAC4709B1F3B028DABF9C0840FD0C43
-:109B2000F05A704C09B1E793E23CB86236F9A4A24E
-:109B3000B3FFCD32CA41E199D0EB0786A3CB70F8D1
-:109B400063393F45FFEE1FC55FB433147FB115A1E4
-:109B5000F88B7785E22F7161289E46B843F192B267
-:109B60007C5CC8FD9B56E786F46F7EBC30647C2A23
-:109B700018A4E07EDAD33343C6DFD23C37A43F7665
-:109B8000C3A290F199DEA521F7B35E5D7143F41E87
-:109B9000DFB226649C9EDEB7B6FDAF9079357A7B46
-:109BA000E0DFBF82DEE6C4507AA70AFD1AEDE4F5D5
-:109BB00065FD46DBD312E8234C13A15E8B6E7FF765
-:109BC0006BCC43788A55AA9FF3CC64B40FFD82EC2A
-:109BD00092500FA5C0148634AA5FA7FABB1F1B0CB6
-:109BE00021FBE28989DCBE2726F27CCDCF4DFCDC4F
-:109BF000520AF88F64870C2C102F031E22315EA6A8
-:109C000078FAC7CF60BCDC14DD97A1427C6CC6FE3D
-:109C10004D017DB9C8AC36F6013E26C85C1F829E58
-:109C20004C4B84F93F919E30723FC263443F22C542
-:109C3000C23C91B9643F287F1CCDE224ACC78F0A97
-:109C4000E869F51A106BDF8A2C3A07F51E4282FE8E
-:109C5000AF2586ECE8DD9A7E5A9E49FAE9B22DD40A
-:109C60000FBBFC401A5D3F71AF99F6FB4F883A4439
-:109C70006DFDE784DEFA53BD85DAF3F5F6103DB6E7
-:109C80007CE3FA08F41F4F64707F51BB5E82789BBF
-:109C900088AD2CEC9AC58EF9AC7BC0384701BE5715
-:109CA00075F7452E62E43716E3BA6B375EB9F74DA8
-:109CB000E8D719FC09DC3E7878BDCCC78CFCCFEA2C
-:109CC0006F5888FF343791C7E973C5FC0BA0B10307
-:109CD0009E1600FEA3B17D775A39F2275CA7F3697F
-:109CE000B3BB19D59FCC71A7D23EE351E6F87017EC
-:109CF00080F89D4495E09CC75CB45FFFD1BDAB226A
-:109D000070DCC07CDA3CC028E86F7C1CED3126603A
-:109D1000DC7F1BAF6F80F759F0BAEB9E9427D10E12
-:109D200069EFFB88B92F7C88FBDDCC41F36AF33304
-:109D30001613A29F762C5FF9692CBC6FCD0103E549
-:109D400013D6749829EEEA5FF1D7AD2FC2FDFB520E
-:109D5000FA6E42BBFCC98A6FC6203FDCBD01F4101D
-:109D6000ACB130CAFD7062509C72E2812B11781F39
-:109D7000ECEBA617D1386E36537DEF272B368F09C3
-:109D8000F6471F4D2CAAC5E7D8E41B3B6F58F27A63
-:109D90006622D563097E7A58F0D39AD7C6921FB54A
-:109DA0002662809F787F13AFEFD0D6F1A1E0C71570
-:109DB000AF7F5D107CCE7407F0913A86EF6BA920DF
-:109DC000533B7B2EE7E0FD57147713C2D779F57428
-:109DD00024F677BEF737829FCDBB317851063D051B
-:109DE00081FD65EDDCE5C2F6D83CA43BC85933CE15
-:109DF000BFE837AF5DF81DE2A763F3A6EFE3981B5A
-:109E00003C7FC9847D71083C807DA1F8A09F85F3CB
-:109E1000731D428F2AB8839E86E7991C2AF1B3935B
-:109E20001DC27D97C62E03C3BA9548DCB409CAB3D8
-:109E300045CA06CD08392D49A09F855E7925F1E4F4
-:109E40009D4DE4E787FA3DF96FAF08F1775CF08F3D
-:109E5000FC9D97DC8D9807BAAEDFE3332C3145DDEE
-:109E6000B8FF0381B0532A105B38F06B4B14FB2210
-:109E7000420F77A21C61FD3FCE85F97A5F383F67BC
-:109E80000CA602F5F80F604DF8B02945B4D2C50C08
-:109E90000BE8C5BD897F78E669D0939674BE5EEC09
-:109EA00037E2DFDD9CDF06FCABB7C7919E62DFC205
-:109EB000DB100F225FA1A7533EC8078B0D9233F131
-:109EC000BC6FFFDF22314FBB35467D1FE9E03F20ED
-:109ED000D33E4D98D2678A1E222E7B13F59E89FBB6
-:109EE0004D546FDEC6F38116D5C9300E08B3DB279B
-:109EF000049FB36B17FA6ED5FE4F4699800E170C70
-:109F00003D91D9307FCDAE1D91E8C6DF6B747F8A5D
-:109F10007CB7F2C40705763ACFB671149D03F08D75
-:109F2000A6BA83F10AF328B983E1A8DB904BC6B83F
-:109F3000760325E3D9F8F6BC87501FD5F9F83A71B6
-:109F40006E2CFCCB6C63D4BFD8D61883F3D5FDB68A
-:109F50002319E567733C8F135FBF3A8E3FAF30051F
-:109F6000C77F99182DF8D96BC03863B3884F2E5E20
-:109F700035D038EDFDE3DB8A643BF043B6AF792F93
-:109F8000C543ED6615E91AF60AE378680F2339AF81
-:109F9000EB9CC1309FDF1FCD1C12DCDF1AEEFF03EC
-:109FA0009D33EB30AB981F0DB337B318987FABD808
-:109FB0000FCD048EC2F34ADA75ED7D61ED3FC558D1
-:109FC00002F981F2B4614A33BBCD168CE708C27343
-:109FD0003CF2533CBEC767C0FC88FF16C65E26B87D
-:109FE0000270327AAF066726F9735B4DFEB3787E56
-:109FF00005E0B223FD33198793B58F5531BE0FB3FA
-:10A000003B691D6176D5E19106C35597C3BC68BF16
-:10A010007FBC960DC82BCA6F5D78A06F0119D83A26
-:10A020009A09F9B63F5B3A2DB80F8A6472E0F9716C
-:10A030001B629E6D1A49718347C63816DA88185C10
-:10A04000A7CACF3B636A2897E301F7C5AD167E7FA9
-:10A05000603CF0B70DFB363ECE1165B7CE94484E4E
-:10A0600028AF572BE4FD31C977F67690D3BFF8F6C9
-:10A07000E6A8004BCDBB7B884F571ADA5F1C0FF761
-:10A08000375ADCF94980CFB74E1AE81CE99F5E0BBE
-:10A09000F35662FCB87B63827308F9D0CFFFC3E349
-:10A0A0006B9F4F41FAEF9654CC9BF61BFDA310DE3D
-:10A0B000DAF6CF4D548FD0768AEA938E24B99DF884
-:10A0C0009EC96D0DB46F3C8535D3BE7196387FDD6A
-:10A0D00092C4F5C7E563635E6E08C2FF8349DC0F77
-:10A0E000637EF7CD2837ED423E3BD12F817697F046
-:10A0F0008F7675DD9DA606E5FD1AD8DE14C4F75AE5
-:10A10000F636B5DAF57E2F3FCF98F591E53E67102C
-:10A11000FFB993B89FE716EFF327B91724A1DC76B0
-:10A120009D3645AA785EA56514DA9116F09FEC433A
-:10A13000E065406E757254A7F84D38BEEE1C3F774F
-:10A140000A746EC2FAFFCD1FB58D5B02D77701AEE0
-:10A15000B1DED373C24C758FBB8CAE141CDFF0E143
-:10A160005739A8B72A1069F0BFAF3A56DE8C78038A
-:10A17000BE2F0E47F9DACE488F69F2998DF209CFDA
-:10A180006723DFE7633F93F4F056532F3FF7B98B14
-:10A190009FFB04BE273900BEB7A39F906D0739A06F
-:10A1A000E7C7927C6FED35D0F9540FE8F15BA85FFB
-:10A1B0005C85FDADBDA576926FCCC3E7A29CFAF697
-:10A1C000D23C2D108320E924E60AF61FDB132389F5
-:10A1D0008F35FD783091EBFF960C350AEBFFADB271
-:10A1E0001C2217417690F7859DECDD50FCEC0BD3DB
-:10A1F000D0DE09BB20FC27769CEBF94785AD5AF3EE
-:10A200004EE1EC2DB0CE3587E5817A6EF4577D8234
-:10A210004FF60AFF15ED849AC7EB67F0FAC40DBC40
-:10A22000CEB5C0B9BA04CB38265734EFC3B6D0D5B3
-:10A230005282678EA72DECDDC7CF1EF3F3E3AD7B13
-:10A24000EFC8C27DEAFE136686FB24AD7FF3FFE113
-:10A2500075C0C3773B01FF43D825580EF11F58EA5C
-:10A26000149634F87EBFA4E98FF995286F175BE543
-:10A27000401FEC612D3038F67F9D54F5AC07004B44
-:10A280001BE17C1D59A230D94D6DFF91BF25A02D3A
-:10A29000D8758CFB4DAD266716F24FEBE8D0F3FA7C
-:10A2A0005AFB62123FE79C6F6643E6250F09BB37F6
-:10A2B000C6C39E413EAA6D95ED5EA0FB8556D96949
-:10A2C00002FFE6ACD39D806765CE31CF82A968E7F7
-:10A2D00045DCA87D4F6519FA2760A71E7C61501EDA
-:10A2E000DF807CF450BBC47E066B5EFED2D0FB0ADE
-:10A2F00035629E87DB36EE4F013AAE7825745C8D71
-:10A30000A813ABD1F92F8792447C98C6D2D02F01E5
-:10A31000FE21BD605458B719F8F5C1647707C61B14
-:10A320009BC5770C407F921C7608BEDC2AEA04FCB1
-:10A330005B25DAD7CB7CD52B1BE0F942C52BA39D3F
-:10A3400062D0E23EC164A7BB1CF10BEB3E86FB353D
-:10A35000CB851E5CAEF9655EBE9F01E696FCB22918
-:10A36000CCDB1889EB7E5572F854FC8EC8A03A5CA1
-:10A370005A779D5877CD8623FB318C5BD5123AAE48
-:10A380004EACBB4EB76E6D5FFBCF49BA73C837B8E2
-:10A390006FF16723F7133E10F368F7CD23B83EAC97
-:10A3A00005F0906E355ED9EBE57E9D0DBFC373BFA2
-:10A3B00080F77E41EF3AE633A5C0B8552FF075B26D
-:10A3C0006743EB3F1F6C7DC484F1959E2F966F31E0
-:10A3D000923F0A8833A1BFA8E78B1562DD2B74EB8F
-:10A3E000AE754B3AB8B89F3C18AE960548D7555B4A
-:10A3F0008C0CEB11F5702D6B59528E7C36985F39B1
-:10A400005D5688F90270AEA6737C370AE7A8118200
-:10A410002FC7B17144978AD81BA28BDE8FDDBE7F18
-:10A420009C15E5FB72F7688ADF35BAEB9F2F177E24
-:10A43000F08C0D8CDA0B6D25D6F118A7F4181C9250
-:10A440004AF156E478C0475E87CC2AA1DFDF9EB68A
-:10A45000DE0378CF3D9C5F85F17CDE61039D77DB79
-:10A46000D99D4FFBC07907D263D3281FEDA0EFCD54
-:10A47000C03C643FFB7B72D7E3B980FE9ED27C9CDC
-:10A4800057827168E773851D68E8C9B5069FEF2E8E
-:10A4900018C1E3F5A7923EFB31FAE133B61BE97C24
-:10A4A000C30CA3FF3DAC9FDAD9ADD0BE75CDE1A5FD
-:10A4B0006BC390AEAF49B46FBDBF774DDC62E4AB08
-:10A4C00076A31DF7A1FBDBFF6D2FDEF76C91E87B18
-:10A4D00012751D65595BA19FBB31CF117CDE2B37F7
-:10A4E0005A25F8D8082BC5C3336E32925D3C9F6C59
-:10A4F000FD25FA372B9C1B498ECFEFD969A2FAB9FB
-:10A50000AD1243D3BF3F69DF1B888FF36F1E31A1AC
-:10A51000935DD27AC4D4F777ECFD052F04FE1407BF
-:10A52000379B304E59B551EBF799904E2EE1FFD441
-:10A53000BE728AFA2BDA24D2332B5E92E93CFBBE40
-:10A540008EB74CC8C7B55B2496981A747F8314F2F3
-:10A550001D84A58CF3C152A1675632EF53C9306EEA
-:10A560006533AF23604F87D6E5AEDC3287BEDBB400
-:10A57000AC79687DF3B0E0EB87301EBC15BF831467
-:10A580003AEE61EDBB5C3A7E7E5CE3E74C9689FC7B
-:10A59000FC55911A950DD7BF3AB2E2E6A1CEB1F7BC
-:10A5A000083BACD9C1CB3E03D911FDB88B6D570820
-:10A5B000DEBA9ECB26B483E5ED9708EF95ED5D54AA
-:10A5C000C7711773D7209EEE6AB7DA518E2BFBB88E
-:10A5D0005E9AD96EF67A25BCDFD284F4ECEFE4758E
-:10A5E0008B9E3D12F92F9ABE7A48E0EF2181BF87FA
-:10A5F0004041A7E4A21FCBE3DE873336EE8F81FB19
-:10A60000B5E27ACD817D91E8EFCD6497EE457AC0D1
-:10A610007B18BE87BD148AE73B1987E3CE2DBCDECD
-:10A62000596FAFFA4764CDA6FC23C49D084FCD9661
-:10A63000503CD7EAE2ED7523B87DDEA4C373A59F35
-:10A6400059B3110E5576786974AF82EFEDCE91282B
-:10A65000BFDAADA6450DB5FFA8B5EF09BF59EBCFE1
-:10A6600016E7AB5BECCDB6E038D894CCEDFF8A2989
-:10A67000B207E934103FA4EFCB510D81F801E28617
-:10A68000DF8C88E771041674BC3B5266717181F8E7
-:10A69000E18749EB2B73A15FB785CBF9C5C9301FA3
-:10A6A0007EDF4B61E45FD66D31D339C03AA03BC544
-:10A6B00009EDFC1C83AB5D2A437A83FFFDEE88899C
-:10A6C00078AE8619E360DD73DA389FCF29BD447C0C
-:10A6D00072209DAFF7B2A2260EE58F6B7E389EC327
-:10A6E0005283CF3F805CE2F8DA765E0FD4BAF7EBA4
-:10A6F00051A9A8D73AFE3A6A09B45746F0F56B7EDD
-:10A700009E1FFCBCD1DCCF3986FEE7839ADCD8F9EA
-:10A710003EDA83C2CE30A989F8BBD6D8F2760CFADD
-:10A720004D5BF9BE3DDB6DC46F9CB1860F5E6F8AD9
-:10A7300081755F7C5DA27A347CFE09E0B38B4B5B54
-:10A740004EA31FFDD5560BF98F0F828F383D77B082
-:10A750003C6A72AB7D77AA81AD257F722D6BA276A4
-:10A7600095E0E38B6D8D26CA9B79839E1F3DD8EFC4
-:10A7700058A5E33B537228BF357C104EFE5FFF01A6
-:10A78000D98EFB2780A7FF4E0EC687F02F5AF7867B
-:10A79000113DFB8FD8C85EFC49F0D97991376E988E
-:10A7A0002CD3FA0D53789BD5F9D668A41FE21BEB86
-:10A7B000DE3777BE358E9FA7F612DE57BE8A49F187
-:10A7C00020385BAC94DBD3FA0D1F2CA2EFF0D4ED54
-:10A7D00019806B8C292E00D770FC2F493C1E344801
-:10A7E000A1F160DD6ED9155CEF05EBB90FF54F9265
-:10A7F0009003A6F813D02F1999AC92FD6A68E7F47C
-:10A800003474F016DEBF80E73B8CF4FE41F78B3DDD
-:10A810003578FFAB542BDF4FBEEAA9C4FE7747CB98
-:10A82000544FF9DD0F568C0DD69B0CE1047AD619E6
-:10A83000FD0914371E31107C75472E27A4DB501FED
-:10A840006D2CB567A3DEE1FA6EFF68EB72E4630F6F
-:10A85000BE373130CF6BC2DE325C6F127A152FF00B
-:10A8600079C57AD7B2B9223EE67C942DFC3D882B7F
-:10A8700026264F1C1C57DCA83F09F6E0E86209EBCE
-:10A8800089140FC6B53B8F737DD0D0F1D0A7C8E730
-:10A89000759F98A9BEEABB9D0F8DA53A5BB7FB5685
-:10A8A000F42BBEEA7CF856CAF3496B092E0FC29707
-:10A8B00084FECB8709580FBAAAE3C304B2AFBB2604
-:10A8C000AEF744A09F927B275E07BF81F80FFC176D
-:10A8D000E2BF9D3DF99ABF62C579571D505C889FC4
-:10A8E0005507F20F55A21F71B8381FD5B874389F9D
-:10A8F000FC953CF4576C01FF455B4F6532AF77E93F
-:10A90000EF0AA33C81C44673FE61E921FC53D3FAEC
-:10A910000ED9F59A3639A46E507BCE9DACF07D7E73
-:10A920008D7F5A2427F1C776DED6B4EDA4F5AD3479
-:10A93000B610BD1BB618F9FDADBCD5EAAA3D2CC6B4
-:10A9400083F8388497800E334D5EFA6EC5C154EE9D
-:10A95000BFEBE9F15932CF631C3CE1BE19F9E56068
-:10A96000917BAC7D08FBE061C53C3E9504BE5BF984
-:10A970007925FDB853C93C8E8F8C0D3D3F3A605F01
-:10A980009239FFCC340DFD3DBD9F69F2C4D833062A
-:10A99000E08BA39546FB3AE1B78F08FA5E42D55D9E
-:10A9A00046F20F8E32FB3B5867384BD3AF93B95DFD
-:10A9B000D5F2DDAE0D2ADFD7197CAE91F4E47C6DC3
-:10A9C0003EFD7969E1D7CCD7F935EB35FD37868D7A
-:10A9D00041FDD722CEB9ADC90CF306E7A3F4ED7E55
-:10A9E000B18F81E775B06DC8FC98F23607BB4EBCDD
-:10A9F00041756627C2D8689E97A3FCF5AA61F2D775
-:10AA00000D03F2382F84BF347A5C10DF55D1D3E3C5
-:10AA10000D81776D9F2D5CECB39D56DC6F24535DEB
-:10AA2000D67913FF8E9A9FE2AB864CEE1F5D28937A
-:10AA3000685F1CE01C650ED2EB1746F0B8EABB0B52
-:10AA400024CA9B76E1788C9F5A24AAAB5EE5EB354D
-:10AA5000211F8D695DF224C9AB871D6341DFA99871
-:10AA60006DE17671806EDABA07EC568C87EBE138CF
-:10AA70006A713CDAC159C2EEE9CF218D65BDE51896
-:10AA800057563B2507EEDBEBE93D77E18477E2FFA4
-:10AA9000013A9F4B761F21FDD67B7901E63F0F6679
-:10AAA0007E3E0AED65ED307CFB3BC1B7DAF7591C01
-:10AAB00063D546FC3EC98F12DD9F207EFB0DDF462D
-:10AAC0008E63F87CDF7FAF91902E8CE8319C9C9C4C
-:10AAD00012F39D4A16DF258CE3FB24CBB18FF26A7B
-:10AAE000F48EA4FC42F68DED4B35EC7E3707F5D69F
-:10AAF000C5AE0339A6203A9E5F03F28EF6A3635FCC
-:10AB0000826A0BE63303F1972469FCA608BB18CAD6
-:10AB100077E791EFB2B1FD30321DF5EEF6A391B7B4
-:10AB2000E07CBB783BC09FED328D837867CCFC889E
-:10AB300060F89E24F82EB4F07918EB1B53353EF8DC
-:10AB40007EE3707C6B4CE1F584217CABADB705BF37
-:10AB50008783FE7DA799BE8783F9E6E820B9484D33
-:10AB6000E1F230497CFF660AF3D0F7002789EFE075
-:10AB70004C51984F89C17D2E9FCCF765F97986029B
-:10AB8000C1BF93145F17D6394C11FB3285AC97C601
-:10AB90004D677E6A9DCC4EE7148A9983DAC916DF29
-:10ABA0009D9876C96E69A1FA3F5F82127DD622CE4A
-:10ABB000430C41B7C0FA15FAEE0DF1A58CE761869A
-:10ABC000FE6E4A650A9773FA3807D2F702A3FC149F
-:10ABD0007EDF0C5F325561155877749BC22CE10003
-:10ABE000EFF6B70D24BF9D7DAA17EB401DB1E2B96A
-:10ABF0002F18D5BB4E7272F944D3827512DA7AF5EA
-:10AC0000782884F9303F364981C892F0E8A3F7DD0F
-:10AC1000CEF8398D22A6D207566EC78F27935EF7DE
-:10AC2000539C54027112EA7583C543F828C3E4CAE1
-:10AC300044BEBF1109F314364BEC38EE57A4F1F5BE
-:10AC40006AF3170223E0B9BD32B15E4C811E8FE179
-:10AC5000FB1E9154385C6AE7DF094AA0EF04DD2847
-:10AC60005EFB13F8772123EFF75FFC7E7E60FFC762
-:10AC700081DF0D8A0C7C8FD281E74C307FE753CE89
-:10AC800007FBCD77A72CAD4E9918A897636EA6A2A7
-:10AC90005FA1AF9743F49D0B3ADFACD57BBCEA9D37
-:10ACA000ABE2B9B98571163A4F9B6B199587762B34
-:10ACB00023D15D9D42751F5B6EA14914EF4457443B
-:10ACC00080CFADCC3919F11CA8D7E3DF4F1A38CFAC
-:10ACD00094C0E8FC9FD5CCEB199F01B9C0EF178158
-:10ACE00054A958D7C29E28A1FAC7A7A22D0E3C8707
-:10ACF000604678AD01781B2DA2EE475777D96833AF
-:10AD0000D0F7381B59389DE79E15E6FE1EAEFFB101
-:10AD100088623A2F9DB56D5A12F983B0DE69DA7AEE
-:10AD20000D83EB10B1FE0F9FD3D7FF69EBC2E3EBAE
-:10AD3000F85EBBC097B64EBB76DEC7A9849CF7D140
-:10AD4000D6FF4C385FA71177E2D3E85915F5837E1B
-:10AD50007D1A3FFC3FDDFB356D605C0000000000AC
-:10AD600000000000000000001F8B08000000000031
-:10AD7000000BBB26CBC0F0A31E815964181826F126
-:10AD8000A18AD112CFE066607804C42C3C0C0C85FB
-:10AD9000407B23807424101F01E2A340ACC2CBC0CF
-:10ADA000100BC471403C07C89F0BC4A5409C05759F
-:10ADB000632B0B03433B107702713710EB303330BA
-:10ADC000E832136F7FB10803C31309045F5112689F
-:10ADD000A734FDFC3FD8F00C7DFADAC76DC0C0B0D7
-:10ADE000D402C11703B29759A0AA596E81DF8C15FE
-:10ADF00068F22BD1F8ABF0E8DFA787CAD7D340734E
-:10AE00009F160383155298E86BE0770B3ACE04EA5D
-:10AE1000CD0262009F3090CD68030000000000006A
-:10AE200000000000000000001F8B08000000000070
-:10AE3000000BE57D0B7854D5B5F03E731EF3C8CCFE
-:10AE40006412420810C2092FA30D382121058AED92
-:10AE50001020A2458D8F2A54D4098F24E435011F78
-:10AE6000176BDB0C04232068B058A2463B4150F01E
-:10AE7000061D6890200107B01A7A7D04AFF5D1F65F
-:10AE80007A8352400824E20BBD6DFDF75A7B9FCCBC
-:10AE900039273340FFF6FF6FFFFBC7AF3DEC73F67A
-:10AEA00063EDF5DA6BADBDF61E990C24D20F08F9EF
-:10AEB00016FEE873A644087DD5F774BE4254924846
-:10AEC000487D0E2DA710923E8A84884048410D2D62
-:10AED000E711F2D06D2464CD2464FFEB16FCBECAEA
-:10AEE000CFCAB45DD87239FD3E9ABD7F2C8BB6A314
-:10AEF000EF1F3B2762BBE02C12DA4CCB4984F636BD
-:10AF000092D021FCF82CF036D8C7D2FA4DB7598828
-:10AF10005525E4513A0C9944888BF8EC84365D351C
-:10AF20008AF5F7C82CCB33A2001F2369F36979F5A2
-:10AF3000F492FCD5B4B446667035CE29792648FB28
-:10AF4000F75846E23C68BDC79CB4DEC3EF9792D584
-:10AF5000B4DD86B916A1249BD66B566687B2A3F3DF
-:10AF6000D79E7389C4DB05AD9689F0F4F1674481FF
-:10AF7000E72FA658709CB5350C1FB49E624923A4D8
-:10AF8000B5F380CD4FFB5B5BD97AB8907E7F709430
-:10AF9000C54B31481EEC3C60BF848E1FCCB3784754
-:10AFA000D3DAE95244F038A3E34D2214F009B49EF9
-:10AFB00077874D75F6AF4FFB9D0AF35E43F12E6622
-:10AFC00046DB8D073869BBB59464613AEE2F65EFB7
-:10AFD0002118F797D7240B4112AD77150009F5E634
-:10AFE0005A4884D62352AF8DD071564F79DB369AAA
-:10AFF000D65F5D64814990B55EEDBBD74EA0BF19A9
-:10B00000630E8D02BA5E45BFC33CB21F990DF37E3D
-:10B0100078BA4200FFBF14683D8AE2C662E5870045
-:10B020009FAB8678E03D7DFA62E1B54DB0211C64AE
-:10B03000CD0642F20980807FAB7DA1952380BFF2CF
-:10B040008817CAE95EDADED9BF7D976045BA34CA8F
-:10B05000C1C180BF78F41BC5F1B93A6B891DE841C5
-:10B0600048435AD15842D6039E6050C9AF5EEF8A1A
-:10B07000D65F2930FCAC93894FA0F34BC85342CB29
-:10B08000289E2DD99E39305FA75F2157D2F22A2101
-:10B09000385804BA8C55C86615F9C23E9A96D75EE0
-:10B0A0009AEC05FEAB17C269127CBF867EA75D1EB7
-:10B0B000281A3F07F8B3C9AB203F53FE3904F85EA6
-:10B0C000EB4F26AB55FCDE89ED9DA33C56C40485B1
-:10B0D00087E26500E525C06BCE75F5578D04FA4C07
-:10B0E000B0788042AB85A9EA7C909F249B07C697E5
-:10B0F00027DC80F49307260B4447EF9F03BD299E6E
-:10B100006AD5A29FC3BC9EC8FB286934ADBF26E7A1
-:10B11000C546A0D393F7D8907E4F4EE85C0C72F5ED
-:10B12000D8B9DCF7FD28978A7733EDE7A99C6399B6
-:10B13000840EF8C8CC8F92007FC34635DC49DCF41E
-:10B1400039ABB7968CA3F09186A20599C827C28D1A
-:10B1500014AFC3962A44B5315A7E4BE03BF185B318
-:10B1600059D949E7338CD3B9B5F36D5B31F43797CF
-:10B1700044C6B8F1BD2D3539AA6786E591482AED58
-:10B18000FFB185AFA29C3F7959AA97C9791AF24BB2
-:10B1900006EF271DEA53FD926623C104FA1CD6D19F
-:10B1A0007B03C0352CEBD85C8073FF1BAF0A40B724
-:10B1B000A7C6A5AAA08F92FC9DA48BD27D58F6BBF2
-:10B1C000F7413D97339456948DF5FF82ED4CF03F57
-:10B1D000A9FA3601DEB6093587803EC11C8B97D1AE
-:10B1E0009BE9C13577A586408F0C73FCF17A710419
-:10B1F000F20121A9143E0F4139A91722B691D0EED0
-:10B200005ED66E38090980E76159C1C5A21BEAFB09
-:10B21000852257FF715B4123827C504E077EDDAE55
-:10B2200090F2A21872F03297E77A81CC467E26D24D
-:10B230005F816F862731BED1CA4F013C74DCEDAF10
-:10B2400024FF309BC2F3ABA52372440ACF43D02E18
-:10B2500086DCACE572E0E8204181E275FF6F7F6B30
-:10B2600007BC6DB79032A83F352B6CEBE274057AC2
-:10B270002C24ACFFA6EC8D36D4174216F2DDC28921
-:10B280008ACF3E0EE46FB9E0A7EDD33C4C2FBBBC98
-:10B290004A08F4B22B2D2858283C6A36F16CCC644D
-:10B2A000DD0529FEE6C13F80D125567FCDDAA4D049
-:10B2B0006AFA7D5E361534C01BC595858EBB80B09D
-:10B2C00079CEF3D62F06FA115264017CAEF630FA2D
-:10B2D00034C138742A4DE9AC9FB57793D072E0231E
-:10B2E0000F6B3F0A9A50BA8DCA7BF15F04DA6F3A4E
-:10B2F0006F07720FED12D242360B6DA7D65808C2F7
-:10B3000027450E0940F7B1A92AC0D394E6FDF759A5
-:10B3100000FF6CC9BB917E1E0570D07E9A6A2C3EE0
-:10B32000D417794A33E8E9D53EA6E7357C65F27152
-:10B33000D3BD1181CE9D64523D8978F245EC1E2823
-:10B3400067337832F3D8BCFAE01FAB8496D3C6E9F2
-:10B35000B608817A1A1E4A787F257C1ECEB4D04A60
-:10B3600009E0CE6370D37519E149CF569A410ED2E8
-:10B37000D3587F2AC58F867780CBA1C19547EB83B1
-:10B380001EF62ACDC00A0E0E5F49368367FFEB6FAB
-:10B390007708AC3F942B0787D7C1E74F00DE54AE48
-:10B3A000D7697F2D72441069FDD004A26E64A3A9F1
-:10B3B000527EF4FB2335140FB4E0E4E390F5569489
-:10B3C00007FA2AF82DE583F90DB49C15958FD12B3A
-:10B3D000AD067971F27993062647946D22D02E93AB
-:10B3E000B0B205CA741E25594639235E5D99C2E183
-:10B3F000027EA7FA67D92485F1CFA5CC8E214457C8
-:10B400000FF87C82FAF41AFCAEE0BA9EF153C50044
-:10B41000DFB09AD40211F449C7E3375880AFEE2267
-:10B42000163111F959E8D35F74BC1D4B227698A4EC
-:10B43000A3A32819F09651935CA0001E3BFC5876FC
-:10B4400074D4F8F0094BD378428610DD3899A05FA8
-:10B450003D152D14AFA4460983BE9EA087937ECFD1
-:10B4600078A5E17AA0D7038B5F1D0CF29B6A6A3F37
-:10B47000CE3202E574D82BB4168E7FEC67507F1560
-:10B48000D7270E80783C3E5F81E73027D5B3544FF5
-:10B490006750042BE3A3FA62F5A5EFE6F89D9C7FC5
-:10B4A00092F11981A759AFE8EA5FCAEB0785F3D695
-:10B4B0003B86F53478CCDFCF0816D4532EB0332931
-:10B4C0007E1F269E39B82E7B2DB82E26F0F761EF11
-:10B4D0008102A4679878854CD0B77FB5EAF9E02758
-:10B4E000F012F4AD14463951321C681F52394E80A7
-:10B4F00075AF49AA2983F7E1740701BD7060C6AB37
-:10B5000002E033BDCD3F1CE450B3730BBCE1347893
-:10B51000FFE021FF25289F71EC46CD4E34CF67E830
-:10B5200015CB511F0CF7F776C07AEFAC94BC5702DD
-:10B530007FF9295C4ED4932AF92E85DF1B5C067AAD
-:10B5400056F5D3F220FAACE4CF32F67D556D59EEC4
-:10B550005129DAEFAA51D41EA57A717DE77ADB353D
-:10B560006067D45854E0DBB5DEB76D3E27940B0618
-:10B57000009E5B8B34BB2F22C078E9EFF8D0CE9BC6
-:10B58000E0513CA0B4C65A23833DBAF5A269C6BBBC
-:10B59000E3010E721325E2E0F874A4F3453E8BB785
-:10B5A0009E002C16DD3AB23F6B07AE2F6F904B9189
-:10B5B0002EDABAA2AD23D823D52FF3B91C3DA88625
-:10B5C0006D02EA2B2ABB943EF3B91E7172BD49F598
-:10B5D00030D3737C3D59BB3815D7134D7F826D0D29
-:10B5E0004A623ED7B76B739E49BA86C2E4043D0BEC
-:10B5F0007A298D14C0FA3B1AF40CE8272928C07860
-:10B600004D133C6435AE63467D3ABA86E9C107D333
-:10B6100008F2135D879A61BD6B4A0FA7413F4D3514
-:10B620000704BF6EFDD4D63B574D27013D382F8F01
-:10B63000AD73F3B2D978BF07044D60F0825E35AFC9
-:10B640007BBF98B203956502B7B7CCF8172CCC0E28
-:10B650007C78D6DB88C7B50B1EC12769D880FDA5CD
-:10B66000D9180D56651DC0F76BFC96996077AF979A
-:10B670003A578EA2F0AF9F394F09D2EF6BBCCCEF97
-:10B680005A3D65DE33B0AE592D0A83ABA60CEDD51D
-:10B69000040ED706E81BFD4405FDA2BB6FDBB872A4
-:10B6A00004ED278DFA31820A9542362BFDEE049A7D
-:10B6B00082FEF64718FC5E524062C0FF1F8283F98B
-:10B6C000A1FECE8ED1484F8B07E04DF0F6DAC04F89
-:10B6D00054A91FA6AA00AF6A1F8BF05A3CCBD468AE
-:10B6E000FBDF717FE17658F8C1BE9FF3EE4C90AF5F
-:10B6F00075B731BFCC0CFFDD53431D161C87A05B13
-:10B70000E78A83D7B9A0C140FF784308972B8BC144
-:10B71000755460F47AB8B3E02AF4938AE87BDAD1FE
-:10B72000239D23EC20DFFDECCC840F73D0DE31AD04
-:10B7300033172A0F33E9FBB1D6F0D5C86FDB2CA83D
-:10B74000A708617A4E2016F5DB91B08830B890F5E5
-:10B75000A8FE5E2147E62CA0F557EC7412C097C6F0
-:10B760000FE9BCCFD535940F62CCBB4310E3D19D1C
-:10B77000D9199CEE9D30DEC00BD39F4AB31DECB6A9
-:10B7800070A87E4839F81F35CCDF0D470EA0FE4962
-:10B790009F7E33FA295B9A53E72C00BECAF27901E7
-:10B7A0001D1A3C609FC4F213AFB6D8CEEBBFC7D30F
-:10B7B000C38D952BD0EF6DEC8C3DFF2916E66F877E
-:10B7C000A99EF466C71F3FDFC2ECE8240BE7BB1954
-:10B7D000AFA6E9D7336D5DD5D6D96112098ABAF51E
-:10B7E000F0268E3FF3BA49A406DB18C6E7E83F36D9
-:10B7F0002E6071880D532C185FD1F89CD64B03BC7A
-:10B80000D279A03D47F93004F6DCC3A401E526480F
-:10B81000DB6F26FDE1BE8D582E6A7E93F9FCFAC6D9
-:10B82000E3FEF5ED5C5FADCBB9C70E5DD1F1D28023
-:10B830003F026EA627AB5CCC8E9DB6538EFC80C2B9
-:10B8400051D52CA09D65D9674738CF6CA265DA75B4
-:10B85000C4A560FDD31E1B9603D6CE87BE47CBBDC5
-:10B860003B4582766496C302FC7A8CF32BC9A365B0
-:10B87000B087EDAC58D5BCFF76E8AFACCD4AECB4A0
-:10B88000FFAADDA5D77E8F964B3B640255AA362FC3
-:10B890005386D0F2A2901086724F015DA8002FC986
-:10B8A0004A08FCF61E7767EA8FE8BC4FD6DA884A6A
-:10B8B00041A97375A6DE44F1511EDA5E08EDCA5B3C
-:10B8C00004D088741E9B5F1D0CF3DA2A78C1BFAFC9
-:10B8D000D89260B0078FD1A9FC807E5F42E70972E1
-:10B8E000594A1A0A619DABDABC4E5175F18793B57E
-:10B8F0001E1C472B576DA5E3D076D5CF0B5E986203
-:10B90000B585F8410F9DD96D9FFDB413E6B74C196D
-:10B91000E382793DA040BDD250F18B7615E06B56A5
-:10B920000AE9F7F2A66605E25B012BB903FCDC8AA3
-:10B930002D038C70358A28AF4B926C1B419F13A747
-:10B940002FED86B1FDE97CB296EAD831D17239E8A3
-:10B9500043E4C39072BDAEFE703109F9B5628B68E5
-:10B96000B4B3F9FA1F3CCCE81FDCEBC2B89F46BF6A
-:10B9700025DC5FD6E8B72489D353EACD8F05CF43C2
-:10B98000400F0A4F03E08B3ED770F8DC53C8548851
-:10B99000BBB87DC423C4E06BF3B34126C5C0BAFF76
-:10B9A000BAFCFAA9D260741F1643E4C9B362CED4BC
-:10B9B000E9B4FC3B4BD1660BEA0FAF0A72A4F9D98C
-:10B9C0004F59985CD60F56107F0D33F29F66F109E0
-:10B9D00082EB5EC38C9267C02EA0EDB759500E6902
-:10B9E000FBB1F1DB7B0A271ADA7B0ACBB4F63BB159
-:10B9F000BDEDFCED1B0A271BC72F2CD7DAEF45F84E
-:10BA00009DE787DF73E514E3F8575662FB8095D115
-:10BA1000AB37C98676CD0ABBD727313B2A02EFA5C3
-:10BA2000E4311BA19EA8F103E9F481FDED6C491AF4
-:10BA3000BF9AE8F9A2E00D80C345A545CF17891349
-:10BA40001D067E4CF2251BCAB427CFB1EFF0320C95
-:10BA5000E2B6213CCA1005F5C5D4213684F79E7D97
-:10BA6000762CDF3399C17BCF1027CA19AE2D948E67
-:10BA7000F728FECBF5762BAC4C104A7A53F47F04B2
-:10BA8000F88DBE572DF0DE21921AD4CF5682FAE8F7
-:10BA900081CCFCA7833AFCAC1C46E94BCBA7C1FE8A
-:10BAA0001918C5EB03C34AD28A75E3D40F53666FE6
-:10BAB000CC66EFE73B61BCA21EC04340E91D0376A4
-:10BAC000A5791CEB888986716C196538CE37A6710B
-:10BAD000AC1965A6716CB337F2F77C9C3FC3BCE22E
-:10BAE0008DF3C088C9C6F96494E33856D1349F8C6D
-:10BAF00072D3380E361FFA9E8F6317CF379F91533C
-:10BB00008CF3195E89E3A4888A216E651D5E691A2B
-:10BB1000C789E3C07B1887A433FF46B1F69620FDA2
-:10BB20005FB613B0A715ABFF59E897FCC14E509F05
-:10BB3000A874DC41A0579271BFE03F2CC9389F2FF9
-:10BB40001D94FE4E3D9D839A5D80F6CE420E2209E5
-:10BB5000D5A37F5ECD797441CBF519CBE0D9362DD5
-:10BB6000AD18FCECF52E2FC44FCFB44D53E6C7B043
-:10BB70000B1636C8C7BA0CFCCBF55E01C9AA013F4B
-:10BB80008BDB015AF918D55F84EAAD8FA8FE82E7F6
-:10BB90007199EA69FAFE28D56F44D1C3BB0CDB1D4D
-:10BBA00093181E8F35B175E4CB7587658CF305C985
-:10BBB0003B59741E37F3692C6C4860BE028723C062
-:10BBC000E9D1BBDB1ADA88F4F00D05BB87340EA08F
-:10BBD000B8E2F54600BEA8B824637128D8473F5E96
-:10BBE000B9FD3750ED5DA178D8123ADFD9ADEBE45D
-:10BBF000A1B47C46EEBADDEBD4F5335BFE08E66D0E
-:10BC0000A3FF413F73FCB4AC1BFFD63263F936226D
-:10BC100045CB946E33C4119C1E7C5C352403BD6EF1
-:10BC20004E65F0DC06CFF1F0D983F4BADDC3DA6AF1
-:10BC3000F004EE934904D7A3AE81CCB81D88F5FC7F
-:10BC4000DABA6282EF76D9E62BA2F4BCFD5E11F17E
-:10BC50006886B76B5F82CF42FDAAAEC6CF64F02F75
-:10BC60002F04FF1D4B8DDF49908DA7E155E3835BCA
-:10BC7000664F1D7054576F8EFFAA014775FC726B9B
-:10BC8000D9F586F26D35730CF5EF585A6CF85E1CD9
-:10BC90005C64F83E7FE562437961C3BD86FAA58D99
-:10BCA000CB0CDF17855619BE576C59672857851F6F
-:10BCB00033D40FB4351BBE5BF65D7A1DC863DDEF70
-:10BCC0004402F6D917CE630F817DF5855342BFAA92
-:10BCD0001A788DCAE189DA34E4EF93B52A3ECFB4FD
-:10BCE000E5E2FE58C041E599AEF51BEA0E2D5B3941
-:10BCF00005F408AD4F75F813756F2D0B52DF7D23DA
-:10BD000004A929DF8B8D0A890C003F26B98FAF7BF0
-:10BD100045DDF7AE0B7C6FA40B566EFFEF6257EC60
-:10BD2000F73D42EF18B0EF821F5871FF269EFD408D
-:10BD3000FF869218FE83F6EC86F8864EEFBC2C3216
-:10BD4000BBFA72B1E065913E2B1526EF953B0617C5
-:10BD500040BCA052898CA9896167F78D17A6C00CD9
-:10BD6000827E98BC2C0A0D8DCA2FD26FA441EEAFF3
-:10BD7000B1F8F7817EEEDE2FB2FD81C8C10CD8A7E5
-:10BD8000B95CF4BD0CEF49DB405C1FDFADF50D384D
-:10BD90003A8A90F76B67E2F3F7B54503207EF4C764
-:10BDA000DAD958FEB0D68FCFAEDA327C7E545B83C0
-:10BDB000DF8FD62EC5F2B1DA203E4FD4AEC4E7C92C
-:10BDC000DA06FCDE5DDB88E533B5217C6A72A0D93A
-:10BDD000A32485DB7FDC5EA72B0796CFF23988F49E
-:10BDE000DF9D28D7DE3490EBB3CE2FC7809D7BF646
-:10BDF0007D2B06D1E3E1C9CC6FF1E9E7C3F5BE24A1
-:10BE000044E99FDBFFBBDDC1E863B79099E09FADDC
-:10BE10001AAD1088AB3B5EFE0EDACBF4BD44505F2A
-:10BE200086BCFA7DC4BEFE61CE832E4C27ADFEB12A
-:10BE3000C7FF2B7F5E36D087D1D77150AC61747B42
-:10BE4000DA0B74D3E18FD9653BB93E37E151E27229
-:10BE500067C6E7E9811A3E3B3320DE522516592496
-:10BE6000FAEE6CAB15E775B63D81ED637B522E2A79
-:10BE70009E57B1C5EED1EB87AA7092C7A82F067B5B
-:10BE8000F4FAE26CC7D36E90FB256916CFD15CE063
-:10BE90000F1FE70FC6775AFF55E14C8FD3D08FB1F4
-:10BEA0007CB64198C9F615D5C49B62F807DA734988
-:10BEB0009AE2394AF5C2C92D2313615CEAC7796059
-:10BEC0009CEE5A8F878D9BE6D1F365E55207D6D756
-:10BED000E08BD7EF3F1A3ED8F1FBD8C6624D10A7D2
-:10BEE00089573F2E3DA4CF15F00F48BBFC25AC3B36
-:10BEF0008E2C6DDD91B0ACF51B088B41EBE5F0BEEF
-:10BF0000C5301E6DA76A3E34B48B4F77891CD3E8C9
-:10BF100049F5E4953C3F843233D2D94F7B4CA4FDA4
-:10BF2000F548CE9510E7CD9454D477011888F25394
-:10BF300095AD4BF1AB88EE4E8C7B4ED4E45EBDE507
-:10BF40000F94E53EF93719E319E4CFB477FA5DE6CB
-:10BF50005F179022373819F35A2B66819EFCC4A2D2
-:10BF6000D9030DF930EFD3C482FBF9A7C9DBEE5C2E
-:10BF70009D5D5626F1F8E44AB63E07E97F303F6AF8
-:10BF8000A719D6EBD24663B984DC900AF250B25EB0
-:10BF9000861D5BB208D67BDDBEC96CC983F32E2536
-:10BFA00035F560A7AC96D93EEA3C0F918652B8AA07
-:10BFB000763D990FF66C4062FA5EF39F172533B811
-:10BFC000CB53428A8F7EFFB835F7E6EF11681FAA80
-:10BFD00007BD1674116FAC78CCFC9546F82E04BFE3
-:10BFE000195E42961BE0D0FAD5E010B70831F33461
-:10BFF0007E26093CAEC3E463AD64B45F1FE178D034
-:10C00000CA1B4CE526537D8D4F64CE279992FF11B4
-:10C01000D03F55B6DE42B4D308E58FEC683D255AD3
-:10C020006FC3F9EA59A19E88F59AA409F1EBD9A347
-:10C03000FD35C7EAAF6AD7B61783949FCA5F78D435
-:10C040000D41DF4FA48654887F556EBEDF0D783AD0
-:10C050002105DD40EF4F4262CCB8E07B7DF8F2393C
-:10C0600005F02390B529DE9F7BF05AD0D75F6E96FE
-:10C07000312F26B0C51AB1523EAE6E5D340BE2F7D9
-:10C08000B47C84951FF814F60D036D467A963FFB39
-:10C09000682AC489282699BD4D226877546FFA53BF
-:10C0A00021E8F100E9453E34B783F1CF25A3DC1741
-:10C0B0002B89FDBF6BF90A012E6781D6073F85BC2E
-:10C0C0008480897FCAFAD6932E05E2081D922B053B
-:10C0D000FDF2EF92EF821ED0F04142CC9EA8DBBA77
-:10C0E00061DC110A4FF7A67F730B06BF9BF1E1D904
-:10C0F000F0FC5FBDA4C6D73367B83F146D17C27696
-:10C100006A1BB37F483B7B56CA1137D89B95CDB28B
-:10C11000977228A9DCF6F4338F839FF68115FDB45E
-:10C120008A6DBF7977322D576C975366B1E93885A0
-:10C13000D4285D02F47F4BC747E950FEEBDF28EAC5
-:10C1400058F6FEA7C9517A546CDFAF90B1FDF137B4
-:10C150002DBC5FE972C6A04BF84821D82B755BBF98
-:10C1600052C0EFFA649F400665F66F5FD6FC1B5C19
-:10C170000F014F48474EA73EBAF5A357E4DA97F2AE
-:10C18000B09E07F4643C7A3DC7F572D52E174982FC
-:10C19000F8E7EFADA15940C7E7EF74C33C8E4B35CC
-:10C1A0008CAF9FBC3F15F6FFCAE460AA079FEC7DE9
-:10C1B000D9537723BF950A35A96C1FD33798C7CBBE
-:10C1C00007C3FC1636FD08E75742FCC877654F8A5F
-:10C1D00045101FFE422233B7C7908B6B64B6FF74C5
-:10C1E0007CA31592FCC871B0F3C1BE7E5BC4382B32
-:10C1F000218B711FEC6E2D8E4B9660F90BBE2F3587
-:10C200004AB668FEA1CDC0AF9B1EE804FA9C1CE6AE
-:10C210001B0470523C0439BE04D8EF170FCF18C46A
-:10C22000E8C3F20DB01DD5FFD3E03DD4EF94719F6C
-:10C2300050D78EEB4B36FE5D7C7C0AB703D6B3E35A
-:10C24000A96CBFD23CBFA57C7EF4AF93E8F84B2726
-:10C25000DF4CDE37AD62F2ADC97BE8FA99F0FDF351
-:10C260007798FC403B583F285C9141F87DFF4D0298
-:10C27000EA032B89C492EB4D32976BE3F700955399
-:10C28000880B50B825C86788F209ED3F19F18F7EF9
-:10C2900049C97ADA4E679F05603CACA744DFEBD60C
-:10C2A0008F52AE0766CA46F9274D032FCA5EAC947B
-:10C2B00049104CCBCA0FACE877576E938B60DEA762
-:10C2C0005A0EBEFB63CAD7A7C29A9C1AF5A7594E4D
-:10C2D000CB766C16803FCD727AAA8CAED6B1E49440
-:10C2E000BE8F29A7655DFF57F4A786B780096F54F5
-:10C2F0000F0E4FB2C4C79F590FBA6435A61EA47F54
-:10C30000EF90FCFE7CA7F19BC667D4421B0EFABBE4
-:10C310008F1F357EEBE3478DDFCCF334E2CDFC7D20
-:10C3200032186A14AEA2DD32FA2595ED6CFF86B69E
-:10C330007B75681EE2C787CB17697875688ABE1C53
-:10C340003295C3A6FA3E53B9C854DF6F2AD718EA0C
-:10C3500057B61D54589251C450CFBAF471F2710CB3
-:10C36000FB5E5B6702AD9F2A41E087F45E05F49CAB
-:10C37000BC9C9A66103FDB2BA2BFD5A3F6BA93E90B
-:10C38000FBFBEDCC8FEDF1F072122BF70E54EA416E
-:10C39000CF69EF7BED2CCED953D4EB4ED2F9F747D2
-:10C3A000DA4537EC077785583E6A7F78EA506EBAEF
-:10C3B00048BCEF2C2E384374662C05FFAD41F48247
-:10C3C0006BB860D92D6ED877EB691F79DD6CFA7E7A
-:10C3D000E12111CC67D2E3708F03B848D0270DCE8E
-:10C3E000E7F913F4EF0409FE720AE44DB433FB7A63
-:10C3F000C11A933DECBC4BC1FCB2F5BAB8968EFFA6
-:10C40000CB793F654DC6EFE5640DF25FB9491EFC7F
-:10C41000DC1F38ACC9430EC961FBDB84F9B15CEFAA
-:10C42000CE10B3AF9B4DF1DED32162DEECD9769115
-:10C43000D4C33C5B04DCE724C1812857D5A417F59D
-:10C440009D86976E901B25BE3EEADEF91FF9F70127
-:10C450007FBCF887714FD067F78B1F8CD903E55DE0
-:10C46000EF65FC81F4AF3F6DDFD7B88FD8B3CF8ACB
-:10C4700071AE9E7DAF65DC07E597AC18E7EA596EB3
-:10C48000C57D94E03E5768347C1FC6FC81BABD5F11
-:10C490008D6379922B904E7F96993F72B6FDBF3E89
-:10C4A00084FC91B3ED74566017EC4B40B909BC6441
-:10C4B00047FFBB67EF57F97EE73F6E3ED50AF12392
-:10C4C000FFB9C8EC1DC0AF492C1E1CD833E969C8A0
-:10C4D0006FAE6ADDAF409C7DDACB7F19077AB26719
-:10C4E00007B377CEC85D4FC17E9855F974B94CF14A
-:10C4F0007C06846708214F2BE3A705B363E185E140
-:10C50000A187E201E645F15206FA3D1E3E32947FD4
-:10C51000567C7C7A3BD363DFC53CFB285E041F7BE3
-:10C52000EF0AD9049C3F7BBFEFAB71A0674E8597A4
-:10C53000A13D72A1795FA1B07D96FF39F316221754
-:10C5400033EFB9FFB4F466FCFF11ACAF03FBCB4192
-:10C550007F3EDF750F969F777911DE8B94FF9FFEEC
-:10C560004FA3FB0E4A77F785E9FEC43FEDBC2F448D
-:10C57000F7439CEE2E0FEC2FF7ECFD0BC64DB5F9F3
-:10C580005F68DE2FFD3F3A6FCD5E7FCDA2BE934345
-:10C59000EB1F220DEF8C11207FF1E0613802562055
-:10C5A00090A258F6C84985C53F0A049627489204C8
-:10C5B000EEDF31BF6828B71386DE558276C6D0F429
-:10C5C000B5681F10495D0FFB71AF65CCF7B27CB049
-:10C5D000F1780EE535CF15BC6CF40F9F10880FF283
-:10C5E000868766FCB003ECD5F47411ED59FA443B30
-:10C5F000F615F74CF6BE5231F84557115D99CEABA2
-:10C6000030C5E8FF4CE7FDCD2023DEC9A1F0CFB057
-:10C61000C99E1045D15553FD12CCE7AAC10269D07D
-:10C62000ED074D37F949AF825FAB8B97FDADF84B06
-:10C63000B7323FB24018B1BE08F0374CC478E005BD
-:10C64000F14758FED76B9E1C96D72A7919FE92ABFC
-:10C65000BC184FE57E338405C05E919CF59D20B7E4
-:10C6600012A17E2F831FFD65CDEF8D8767C2FD6808
-:10C67000890FA9E15D4A17315F55D71FE243A3C770
-:10C68000DF4A078D7E7F2F3DCE98E891FEB94702A5
-:10C69000F99CC6EDFFE99F778A584EF74AB81FC547
-:10C6A000EDFFA9CE2409ECFF2BA4C322C865A9ADD8
-:10C6B000ED6A88D3DBBC02F2F525DD16F46F6C79E8
-:10C6C00002E23DAB51C2F2618B670218DAD77E6F8E
-:10C6D000D7A97B09C4877D0A1ADEA488C5E7FFFCB9
-:10C6E000EDB753B4F31AF89D906BA8FFB5A0894439
-:10C6F0001C144F0B25124C4C86F8AE403E32C477CA
-:10C700008D65F8FB7E6AB49F0BD58FA747FED1CF0E
-:10C710005D546F7D449963373C715F85B284CE3F31
-:10C72000FE6E3BC357E075121A8171059F58A4DB5A
-:10C73000377BD0CAF4C7AE3FEEC885B8D8D49EECDC
-:10C7400044A64F47A15F10E07EC159A22642FEC118
-:10C75000D9F69189B82FD821BAFC31E2325BB9FF02
-:10C76000FCAF904F419F3D9B48039CC3E821BD18FF
-:10C770008F0D6EB2C5DCDFBDC7AAC59B38DDE89F53
-:10C78000A89D3752315F2498A8A75BF7AC4FA471DE
-:10C79000FDE9007F1FE9F64BFE5EFC82BF0EF8DD6F
-:10C7A0006AEF2A8C751E6C25C7DFB507BEC638E652
-:10C7B00065EDCD16E0DFCB36590CFB8D412BF7BB79
-:10C7C000C693F100D7B507ECAE3CA04B87E885FCDB
-:10C7D000C140FBA78A3FC6BE95199FD03FC4C5F78D
-:10C7E00059599C7F8F1C9E0F78DD73DA86F939BB0F
-:10C7F00095868A58705E62677A6E2109DF392EF35A
-:10C800009F0FBF537B9C9102F03337111EC730F34B
-:10C810001F413E3EBB85E0F950F04B412F9C6D61BE
-:10C82000E780294AD6823F4DE5FD07FAB8CC256D51
-:10C83000DBFF15EC80EA76C103A9B3D5529702F16C
-:10C84000D6405B9208EB6E8EAAE5557AC6DEA493BD
-:10C850008B7D56966F7C70F29E5B61DCCFBA1502C1
-:10C86000F688EF955E37ACDB9FB5E726C6CA9BD747
-:10C870009EBFAE25574F97A01F827837F343768B24
-:10C88000C350FE9EE81F02F275ADB5EB2E6F0CFA99
-:10C89000F96D8CCF2E5ABF85FE3FD36FEF68FACD6E
-:10C8A0002F16E9E428CBD64FBF0D8AA5DF9608EAFC
-:10C8B00020C0FB92BD2307015D971C9207C6D26F73
-:10C8C000DB6AD97EDE0B3C1FB6A795EAB7CB75FABB
-:10C8D000ADD5867971E676C9360B5F172FA0DF429A
-:10C8E000FF3DF2B70DF45B8CF98EB631BDA1E9B70F
-:10C8F00071ED4750BF8D6BB518F246D36D17D26FEF
-:10C90000C2C09BC01EEE90BD0931F8671BB7BF5F68
-:10C91000E07978300EE8B95B6D6C7FF362F55CB658
-:10C920009DD1FB827AEEBF09CF9A9E5BB2533BE763
-:10C9300068E643A6E796ECA67A4E007E647A6EC956
-:10C940005E768F8359BF65F5D36F04EB574758FB6D
-:10C95000405BE686B9B4BFF13ED96BA3F5C747F596
-:10C96000DD04BDBEBBD5C6EE5DE8A7EF3A2E4EDFB7
-:10C97000EDE4FA8EEAB111A05FCDFCE16D37E61D62
-:10C98000EF9974BCE5D7202F6F88B86F78989F4BCC
-:10C990007B73D2F13CE0AF161BD3BF759CFFCED4A6
-:10C9A00006B1FF69AFB0F95539593E72752BB30F17
-:10C9B000AB5B84904AFF5938F96B05E05FB45720B0
-:10C9C0008368F97A2BAB4F9ED5F6BDC8AC1C1D3FD2
-:10C9D0002C98588171FB0512B1415CBEC259F8090F
-:10C9E000D8BF1513591CBF82BF5F74A8AB1EE2D914
-:10C9F0008B1E1370DF93F07C002DBFB1B47D19C680
-:10CA00006BCD79019A3E5F1432BEAF30E53336F319
-:10CA1000795E2F76215EC85B62CCBC8466333E3A79
-:10CA2000383E3689B86EF6E183E247CDEC8F0F4A87
-:10CA3000D15939A9D1F92F7A83CE2B2F3A2F0D1F37
-:10CA4000E6F96971E70ADE2EDE7C35FCF59BAF86E0
-:10CA50004FD3BC9F06BD010A2187E4425E0CE5036B
-:10CA6000D41BC1DF8A787EBF68EAE8417A3DBC9575
-:10CA7000EBF3DC86A9D30613C017A901BE29695CB4
-:10CA8000FCEA603AEF09EFABE36179FCDE64AB1FCF
-:10CA9000F647B7DA7B51AF697CF50DE7AB77391E06
-:10CAA000F70CA9C173AA8136C1037645206247FC01
-:10CAB0000528FEE0FC4A809F5F0C50FE02793AF8A0
-:10CAC000D8970C5F7B0515E2E385DAFA03F8A7F542
-:10CAD00073DB19FE032101F19F477A717FA4BA51DC
-:10CAE000F04668FDEAB6C598F7A0E95BFAE7D4D34B
-:10CAF00043C78F522C7EC44ABAF5AF82D7BBD6DA71
-:10CB0000F02EF0E7B5CFCAA459C79F59F4BF6F63A1
-:10CB1000D049C3E785F8F21CC7D336C0A313F0D5BC
-:10CB2000CBECA7C8D7788E46FB1E9082063C4E7B86
-:10CB3000FCDC79F13441C313F029E8A9F66211CA8B
-:10CB4000256D021990D97F9EB03FA997DB457B8F59
-:10CB5000B0FE9F14F0DE1233DF6AF3EEC7B771F850
-:10CB600015CEA5815F74B17CFB8D896FDFB4F7BEF4
-:10CB70009E0B7CBB5760F183F624C3FEE2103B5B47
-:10CB8000FFB7DA297FC3BED621D9BB51ED2FDF090C
-:10CB90007CFD02BB5F7F2EE9529808E43D6EB161D7
-:10CBA0001E19C23182D9957ABDBACD4E06DE9417D0
-:10CBB000BFFFC1BCFF78768D561E0BE341BE571BED
-:10CBC0001D2F2B3A9E59AF6B7EFE85E635E6EF9C16
-:10CBD000575F1E26E9C47DA74CC9FFB0559707775C
-:10CBE00033CF33A210A07DA5AB976D3B4F3D92E6AE
-:10CBF000C1F34F777A343E63F9EE453C8F7D86383A
-:10CC0000E53D583F3FF3B17DBE3C0BF9DD14D0CF7D
-:10CC100005329EE3FBEC7519E3B59F4D67799CD710
-:10CC2000BD71508238CD75A09C283EAE9B20A0BF20
-:10CC300002C7B060DF6C17B56F7C63703EB9708E51
-:10CC40002B6753C334387F3C7E4BA80E9EDE69BDF4
-:10CC5000296F021EA78A04F0D8E91B300DEE4FBAE7
-:10CC6000F34F04EF0FA1EB2CB61FDF410642BDC905
-:10CC7000BE81E80E4C6A5D3F0DE2A3D71F743AE116
-:10CC80007E96AC260BF519A2F89B4C4275B0DF3EA0
-:10CC9000E9A8EF4680B78CDA0B10772E6B6FAE7376
-:10CCA00043B949F0AAB4FF40D05FE8A6F3D8D6F85C
-:10CCB00069E177401E693DE826D0C4EA0536C1C562
-:10CCC00043F07E1DE6D9946C12F0E0D7B690406C2C
-:10CCD000ACDF908DF6BBAD89B6CF837582B6877E0B
-:10CCE000377DFACE8D20EFAF8BAC7D0BDBA72EA16D
-:10CCF000ED54E0DB4D8BB1BF454D0249A3FD95B529
-:10CD0000B075A0EC75D90BDF5BF73F86EBD82C3AFA
-:10CD1000DEE04CD0FB91E95026B98207CFA1548EBA
-:10CD200041BAF5703927534633FD21F032F71B34F1
-:10CD3000BBE95D3BCBF72DF12E5306D07EDE9C3850
-:10CD40003013D202026D9FE2FEF3518A673FEDF28B
-:10CD500030CFDB3838F163A54BB70E7D6667F75BE4
-:10CD60002D689B8AF90C0B4911E6335C3B89D96B22
-:10CD70006F5D610FC115076FC9BDE9F0FEE0155683
-:10CD8000B47FCF6C93918FCE0CEBC2F8F4F12619DF
-:10CD9000CF0DD735B1FBB98EB7B0755C7C92EDEB9A
-:10CDA00097BA142C1F6CBAB110D6B7E39BD879C7C9
-:10CDB000694FCE50A05CDA2C78D9FD454C3F6AFE15
-:10CDC0005B8987E52368FAAF8ACFBB5FDEA249DFC4
-:10CDD0005569EB8D49DF55C1BEB21B9EC6F701E216
-:10CDE000647A10EC7EA07BE46BE4DFEAD765027620
-:10CDF000BFF0717721E663ED15309E3FA95DF0C16C
-:10CE0000BE7ED9FBD610DAABA1E23B7E027AFC03F0
-:10CE10002B1154C86BA778A7FA61A2B5F78FBFA0F2
-:10CE2000EF3F396C834C18CA27C588672DFF336FD5
-:10CE300033CB63C93BBC3E15CE5B92E90350DF9612
-:10CE4000368AC4AFD31B9F08BE1B7FCCF432DE4FA3
-:10CE5000A1D12F4F692881756CA483E92575B30C86
-:10CE60003922E4108F93507B1ACFDF2EDABD2E5576
-:10CE7000A1F5EA79FEC7A2BDEB5245FABE0ED62F48
-:10CE80005A7F91C2FA5FB44FF034EBFAD7DA6BFDF8
-:10CE900069FD28BB8DFD8CDCCBCB17D98F0687367F
-:10CEA0007E3C7B7CE2BF9F5B0FF7C54C7C4BC4A4F0
-:10CEB000E3891FCF1AA9DFEFD09E5AFC35FF1D0B67
-:10CEC000F1E9F036F18F0EE2D3F145EB042ADF945D
-:10CED0006ED7B4092100A575C211A52A0FCB1E90EB
-:10CEE000E76A1EA7AD9ECEF6AD5A730EAF00F99E4F
-:10CEF0009527201F90A05F19908276900AF1F1D2B9
-:10CF00003CD6BE94B607B96B7D8CC921D5072AE8FB
-:10CF10008BEAA67585587F93A042FFADCDC5B8DEDC
-:10CF2000974D14097EDF7404ED8FB2B6232920AF2C
-:10CF3000543ED7C3FA5B3DC58AF7796972A7C9F138
-:10CF40005B32BFAFC9E6190B79FDF7015031E457E9
-:10CF50007C9D303FB54546390B4C6472F9D636118D
-:10CF6000E5F9E015B7A01C9ED92CC491E3690A9C91
-:10CF70004B3E1E62DFFBE478ABC0E598E987E34EE9
-:10CF800026D7D3E03BC8F14E81FB83CC1E34CBB116
-:10CF900026971792DF8A2D26798E23B79D52D74D7B
-:10CFA00030EE9D57D811EE69DFDFFDEE9DA87F645E
-:10CFB000CCFB98F6FD7B5341DF95482C5F49C3635A
-:10CFC00095C4F2D9FAC1B17E9932F8A2E031C2F12A
-:10CFD00084DD15D51F22F039BB872BB849463E3773
-:10CFE000CBE1DF2B3FFF28793EC4F9478347DCCBF9
-:10CFF000DA43FE5884E2E9B596A7314FF5F473475A
-:10D00000AE053C57ECA17C4BE77BA6C5C5EF7B0981
-:10D01000E13A53DE2A621E389122F937BAF472C916
-:10D02000F2902A5E70217F94EF60F9A4E52F7E3C98
-:10D030000EF34496F7627E55F0396E6F06BBC6015B
-:10D040005F974B2C1FCA2CE7373998FDD9BD3B6140
-:10D0500036CC43D8C2CEE997876F91810FB57A3F1E
-:10D0600074C85A3DDCBF0C52BE85FD75804F7FEE03
-:10D070005CCB83EADECAE4BEBC4D467FA97C4B3361
-:10D08000C6B1035B3EC53CF7692F6CC3F841A04DA8
-:10D0900034E63D6E112356CCCB148F58D93A65C86F
-:10D0A0003FAC6EADC2FDB6EA30CFEF33E5BF55BC45
-:10D0B000B0F7C520454DC5AF9F75831E38D9B9D986
-:10D0C0000DF8A4FD61DEE0F73F970C7951F1F37B99
-:10D0D0007DC67CC2F0AA98F98427E11F94C1EF7540
-:10D0E000707ED5F230B70CE079DA91FCA218F1FB32
-:10D0F000BE733BDBBE780AF2DCBB779C7A0AE0AEFB
-:10D10000FCEB674F413E13D967C77529F0DCEF3060
-:10D110004F586BF70B07F7F3B73E8BF9D5673EB067
-:10D12000A29F7366EFF10CC85F3BB3FDEB5488C759
-:10D13000DDB57706C62BEFDA396D1089A1DFB5278B
-:10D14000F065E822F2BBCD7438D87A10F3AE4EBF4A
-:10D150006F457DD697171AAE6279B62ACF076D89CB
-:10D160009D47AFE53156B7DE78DD15A09F5B993D51
-:10D17000D797D778A13CD077283D2FBF08BAB5F014
-:10D180003C5F13DD4EC33F287DC226BA7DD1BAF085
-:10D19000578FC3B7D60171F3402317812F2D4FFF4F
-:10D1A000E70EDF1E079CFBDB91104C63F40ACD12E7
-:10D1B000C0DEFB2203CE359C907B31DFA377AFD559
-:10D1C00003F98CE57BDF43F938B3F330C65509CF5B
-:10D1D000933F43FAFE585EB3C0E7B7C9C5F247397B
-:10D1E000DE21BF5475E37B9E47CAF856CB2F8D973F
-:10D1F00057DAEB18C1E2D0FCDC4015F593F8BD59C5
-:10D200007DF9A6C244A0D311439EAE366F737F1E34
-:10D21000AE37A3F9D1B1F376B57CC1289DD83AA237
-:10D22000E53F9F69E679D3F47DFA78C88363EB75AF
-:10D230002024BC4762C8A3961F7DCA61CA8B0E5DBD
-:10D240005C5EF485E0FDDFC5C7870E16AFD6F0D271
-:10D25000FDE7D8FA5849607627F54FE504DC1760FA
-:10D26000FEE91DDC3FD5F0A5C15B1F667643F716CE
-:10D27000E61F98E5B93ACE7D49297C9CEAB6FDE3E4
-:10D2800040EF741FD8CDF98DF17375CB1196774BA4
-:10D29000F57348AF9FF9FD12E6FE32787F81F6D82C
-:10D2A000FD055A3E8DD9DF49C9770BC07FB293D9AE
-:10D2B0004927C3E2CC58F7DBD8126443FE40BD8B4C
-:10D2C000DD9721BA1D681FDDE59AF87E620A3C15DC
-:10D2D000CCEBA95BC6F3807EE6C57B45EB5C5713C0
-:10D2E00080E77EC08F2ECE207BFC04EC3439AD2845
-:10D2F0004F54A3F0F6D123C542427AFA4B9174D031
-:10D30000E71FE61C97A1BFFF34C547FE5322F583F4
-:10D31000285CFF1914BCCBD4F876B556F6FF54340C
-:10D32000C433AAADBD1F827D4E5EB6E37EB8B8CFD2
-:10D330001EC4F8D853EC5E8D833BBF7A06EFE5F947
-:10D34000959570BB50007D50CAE314C7777EF5D425
-:10D350007F811D098DE9F8A54FD1FA603FB724A060
-:10D36000BDDFB323711CC4014A5FBEEF5AD017A5BD
-:10D37000A0FBC0CE7C6150A88EF6776C202B1FDB03
-:10D38000360CCF0554EC70613EE1C19DBBAA41DF74
-:10D390009F79218180BE3F2D77FD15CA813D89A4EB
-:10D3A0005945BB4FD5AFAB8B88A4EAEDB90A281B12
-:10D3B000F25B08E6B760FC8DF273455B229EFFD0FE
-:10D3C000D5E3F21C1CC2EF891A027247ED46D598CC
-:10D3D000F7CCBE2F4860FA2B60EDBD87DD87C0EA31
-:10D3E0000794DE12566E18C2E4B613EB2FD6F895EA
-:10D3F0007FEFDF2FAB1F4860F180683FAC7DB595B4
-:10D40000DDAF61A6EF4F13047E1EF72F97C4BA7FDE
-:10D410002206FCEC5E2E8104E1FE55B2DD8EF7F1B2
-:10D42000542A913190AFFEA2C2F63F2ADD9131908D
-:10D43000AFBE87EBBF4A072DD3F743381C501FCA36
-:10D44000C4D6F53CDEEBB4CB8EF7E155BDECF2A1D2
-:10D450009FF0E257C79EC8837CB504CC93AE7AF99F
-:10D460005F90FE55D6C8EDC0FFBDDBAD783F69F7D4
-:10D47000F64319603774CB918CE4F3ECEB5485AD33
-:10D48000867D6A6D1E276B974E8673BCDA39C3F2B0
-:10D4900038FAE28D0496D7D19CE0FB15D373C6FB16
-:10D4A000654ED6CE36DC9B586E8BADC75A402FE802
-:10D4B000E27862F45C610BF47B9A74D50FA124A925
-:10D4C000127A717FBC7C4B663AF8BB07EC97E0BEE2
-:10D4D000D50159457F109E7A7D7CA2D69B2BE179A0
-:10D4E000FAAC5C89C2D1D3FC69C91002F981F6D9C2
-:10D4F000B1F4D3DE8404E4A7729B35E6F9CDDF7284
-:10D500007EDB06F236818DE7CD8E8E7B400E2900C4
-:10D51000C714A78AF329A77E00BB276A4EAEFEDC9C
-:10D52000F622A901EB51F9427C2C22EB953C677F56
-:10D53000BDB268695EAE948B0AEB9B3E7E13A3740A
-:10D5400022C114B493244E43B27EB021DF5F928B8C
-:10D550006C802F851479241148DD8072EA20617C6B
-:10D560003AA919C2D6A11A02F1F1137C7FD62AA9D1
-:10D570000FE37D331D22EAF30BE1EDBD0437C26DED
-:10D58000956A8817ED8D591EB0C784A09F7C4BF912
-:10D59000A1AE76662E3B174E7C90EFE6260C3EB78A
-:10D5A000E7D5AFC13EA07CC6EEB1FA3E09D5D1F1B8
-:10D5B000E09831C6FF0AD87DF6E6F1FECCE940825C
-:10D5C000FB0DF79DC35FAF767F1EF8EB897F9D084B
-:10D5D000FB314E0F8980BD94E024918471704F9E81
-:10D5E00074522FBF6EC2CA23283B835EF34C317E38
-:10D5F00037F335F14A9FF7E94511DB7F6E6AFFF992
-:10D60000F9DA6BF808D8367A8FE646F1E2E073086B
-:10D610001678CF75013EC6B9BD754047A5F7C3FB67
-:10D62000001FE39CCC1F4C69247A7F2DD7C9F4D509
-:10D630000A7EFF34FD2B72EAFA231E1BC647577180
-:10D64000BCF7D5D7E226FDEADB25C06BBFFAF6783A
-:10D65000F51DB1EBBBE2C193101B9EA438FD07631F
-:10D66000D7AF7EF9BD37232ABC647A0382F3FCDC92
-:10D6700072AE13FCABC40F538B1957B0FD0013DD12
-:10D680001CC07F941F1CA374EFE1FFB275F41B1143
-:10D6900083FE24827C57CCE1A165E7600ADF8F39E5
-:10D6A000B8D337B1FDCAB977B138D18F6DA5E8EFDE
-:10D6B0001EE1F701CD6D647EF5DCA56C1F9194B180
-:10D6C000733E1EFA1F8C771B7442E97D5B83108AC0
-:10D6D00064C2BD3526FBB5EF7E9C450AD42F36C506
-:10D6E0005D347ED2CE23CDE7F67526E7CF85A4D76D
-:10D6F00005726F3EF7FE0AD76B9ADE0FAE235970A4
-:10D700006E5FB438BCB03F2AF273A6C4CDEEF323EB
-:10D71000BE61EC7E392D8F2B4B4D84F58D84F97BCA
-:10D72000BECFB2E42A7590FE9C9674CE81F783D466
-:10D73000C9DE34D083F2396AD751574D393782A8C0
-:10D74000BA7364D49E43E1963DECBE44C953444A47
-:10D75000C10EE4F7039094ABFBECAEB7281E96AC79
-:10D7600053F1DCEA4227B3337FE12ABAD33901EC23
-:10D77000CB895E76CFAD918EC19D6C7E7530BFCC6E
-:10D78000FE70D7295E2FDA9D57538B01E3385EFC7C
-:10D790007D07D1AABEA7823CFE9BCC7EAFA01F1EF8
-:10D7A00018FDCEA624E3BDEC0BDCAB3F043E5DC30D
-:10D7B000EF235C599B85CFD5B5696877D6D77AF1C9
-:10D7C000A9E1C5E66DC07BDF6CA3587F368F9FD97A
-:10D7D00015D496817C0AC9531381B22DBD8680BDB4
-:10D7E0006BEFC34F03E247E92BFBB16CF5B0DF8D64
-:10D7F000901B67219E697B524ABF2F71F91F073921
-:10D80000B1AB9719EE91B3A68D37DD3768C29BC6D1
-:10D810001FDB18FED60A8C3FCCF85B2B77AAB0AF83
-:10D82000BCF6AABE7B67107FD4BC67F8FB2DDB6714
-:10D830008B8B3F4F32DAAF0BF2EB6FAFA3AF1EE42F
-:10D84000FB8B0FD44E447CADE2F748DE5FEBC3A701
-:10D8500008F8A3F3B3660709DC8FCE7E1B823E9DDA
-:10D86000453EB87F167817F0273A193EAD6935B8AE
-:10D87000BF6673327C89CE20E24576327C894EC603
-:10D880006F0A2F4B80BF5C6C8FEF29FE0E007FD993
-:10D89000D2271BF0A5A4145C1CFE1EA3F8A370A441
-:10D8A00070F932E3214561F7536A7215CF8E7B948C
-:10D8B000CE1FD6ED0DB5049F03E3F88B235C6CDD22
-:10D8C0004CB1D4EC97011FC984AF2741929E4F58A9
-:10D8D000EA21FCA505890A6581C1411A8619EE95E0
-:10D8E000143D92E95E367503F0C1FA43B205EEA32A
-:10D8F00013975E6D380F2ACEF625A9884F3FDED3E9
-:10D90000FC60AD8AF45B0774847B40B9FF753FA768
-:10D91000E703FC1ECA555C3ED672797998CB491D47
-:10D92000BF3779CD4C9667959263E1F79545883E70
-:10D930008F29C91B260A850B6D6A159F78CF22791E
-:10D94000DF1A1A4DDB2564131FF049D2FBF786D886
-:10D950007D8D4583C10E4AD2EE5F9CA226CDC18348
-:10D96000B01189F91D5415A21FD36989754F559DB2
-:10D97000F7800DE2A1F1E049F0FA32EFA7E3253498
-:10D98000BAD07E1FE02F9AB390969D8D0918FF4B59
-:10D99000E0BFCFE2A47097EAE81DEF1EEA8DAEABC0
-:10D9A000125D949E1E80913E1F691C89BFCBF2A818
-:10D9B0005C84BFE3F2285F4FB57BCEB576DF70FDA8
-:10D9C000E8CEBBCCE0B7AE977DD8CE33C528FFEB11
-:10D9D000B9BE4D9E6EE4734DDF1EEDD3B7FE110050
-:10D9E0004FEAB9E9A8C7526E88AD77EB6405EF2D11
-:10D9F000AF1BCBE43C58ACB0FB4BFBEB018C539F13
-:10DA0000F58FD9087A54E3ABE584E99D20717871EC
-:10DA10001DE2F7DB6876F04AB80790EB57788AA3E7
-:10DA2000D8EF0FA4CE65F7F9AEE1F7583D44F98A77
-:10DA3000E0BDA75E7C5EED62FB13CB6DE3F13EB50E
-:10DA40003AA705F584F48135042687B47F9207E26E
-:10DA50000592ECEDF441BCCF2585E1DEDC3A671E92
-:10DA6000DEFB2E24E57980FE5FBA160C3F5F3E1D7B
-:10DA70009D28DE97E94929221F65E36E009E47969F
-:10DA80003D3710881B6E48A9B103DE26B9585CBF2C
-:10DA9000B1381FF148F17B9D6B60B49F41B3AFEE8D
-:10DAA000BB070BBADD10E75CF3AD2E662F91F420B7
-:10DAB00019A593F346ED774ED420C9D2C9FBF2D114
-:10DAC0008504F687FACB791C3DB699E9B115426C0D
-:10DAD0003DA6D9999A1E934DFA417BD60F9F69387E
-:10DAE000A7A5A4788177E119B478C1BE7BB1FED631
-:10DAF00024C4430DE081A45DDDE7BFFE6004D88F40
-:10DB0000F931F9CDACBF16F4ADE7BE54A0D3095935
-:10DB10001D3407F8E950ECF57CEA23973E0C7CB005
-:10DB2000E0B7A2A0DF4F293DB712D7D3927313F10C
-:10DB300059D63813F99E40145CE7871D6FBADB0D88
-:10DB4000701D6FE479004D7208F2338E37DE8DF769
-:10DB500095409EB7A8DBDF27792ADA97DA3D63C7BD
-:10DB60004377BAF5FBBB25BFB0FBC06E8DC75F2501
-:10DB70004DB1FD7A5843217E4A01CC027B98DA37B9
-:10DB8000BD11B07F365ABD41122D071FB1C7CC4F12
-:10DB90005CE29AF128E07D89CBF724C83971B27B29
-:10DBA00041E3F3391BF7186C02C37ED3E33C4F53B8
-:10DBB000F2BBF5F7BBF5DDC7C9E324C416E7BB43E9
-:10DBC000FB7D8338DFDD2C9F8378627FD7FC8484E4
-:10DBD000A89FD006F3A86A3C55FF01E289FB091C07
-:10DBE000EE133283FBC43356F63B3726BE38C1F3FF
-:10DBF0004716090CAF1A7F9FE8B377FC780F8D9911
-:10DC0000FF848D976E9844FBFDAC43C6385C25E5D8
-:10DC10001FE01B61E324CC5F171E99F430E4257DDF
-:10DC2000FEBA88DFCBCFD9F07BF7CFBC1BE6429C96
-:10DC3000E70D19EFEBFEBC6346228BF318E3D00B24
-:10DC4000DD6C9D3FC9E5BEE4DC6AE4CF3EFE68586A
-:10DC5000A8805C959C7B08ED99922D02DE13498289
-:10DC6000BDAF4E95381F4E86F6A70B9703BEA7345F
-:10DC7000E0FE46E966AB77B5D09FCE275DAAE15EB0
-:10DC8000F5D2AE35D82FA1F6548A6EBFFB04CF0370
-:10DC90002E3DC7EE07249E204903BEE77A27CABF60
-:10DCA000C67B5FBBEDB1E3ECDF707BA6E4DC648395
-:10DCB000DF109DDFF7997CF2F5BCB46B2283AB6F6C
-:10DCC0003E1B26C59A4F741E53B07D7752ECF1333C
-:10DCD000399E8FD596C1C90D52A6B07A250D772BE6
-:10DCE000A04F4A9A929205DDBC4A1B2B0C7918A5CD
-:10DCF0004DC5CA3C5DBF513A385E9B3A2A4A87CC33
-:10DD000087E42B973B61BD2F72B961BC8D8BF27F8D
-:10DD1000A2427F4CFF7C223764D4A07EB9D31DEB96
-:10DD20005C43A65B35C4954A1B397DA89D9CA7A37F
-:10DD30008F461773FB63CDA5F93F8178F263EC56EC
-:10DD400090F87AC744B7CCD8789BDC87B72CCC073F
-:10DD5000BA30DEBE63C8FBE987374E5F0D2FDA7B32
-:10DD60006A1FE502BE2643C06920F4C3E87F217C18
-:10DD700045C7E5F49F1A7B1EFEBE792C25416A3FFC
-:10DD80002CB8E03CEE2341DB79E6A1D19F5C66A094
-:10DD9000BFFFA1D157821C6AF45E70E031E4DF0559
-:10DDA000541E615FFE78C3DD86F5210A5F1CBA8FC1
-:10DDB0000A92ECFCFF7374FF440E6640DE57701D40
-:10DDC0005B474E6C7C30438FE725AEA90B812E64F8
-:10DDD000D3C08B5A3F8205DE0E15D72519E361BBF0
-:10DDE0005DFE809BBE2FE37EF58AA4C231B1D67D55
-:10DDF000EA174E81F8735DEDCC29106F93B9DD08F9
-:10DE0000BFAC05F6265C811EEB7EAD064ED7FB6BE4
-:10DE10006B307E4D6C41E2D19FF725CC2EFA86B057
-:10DE2000788BD64E91FD1E887F2AFC3CB22CF95788
-:10DE300066E6411C232527A8C3DF436E66D7AD499C
-:10DE40003BE0817C522BED1FE231B674E9AC719F4F
-:10DE5000929573844932CC474E09138C6766D3F789
-:10DE60003A7C2B2914CEF3F89B92CD8DFB451261A1
-:10DE7000769A367FFA06D7B307F8BAB41CE2B82907
-:10DE8000608759D01F5ACFE394BFAC2DE2789070D1
-:10DE90001DB326B1FA4A2283DB0E716B11D6D50869
-:10DEA000965D70C38E885793E1EF8F2611157FA77B
-:10DEB0006F0089D4E33D2653BBEE81F7BE04FF1605
-:10DEC000E0832F07777E28401CBAC87F09ACBF8D3E
-:10DED000623047A5F57F25F6E6403DF87DAFF79324
-:10DEE000D97338E42DFB75FB52EC5E4E551FD733CA
-:10DEF00097872F954CFB357FBE44FFBD39C1B70BCB
-:10DF0000E048F958C07D983A3BBBD7A7CE7573223D
-:10DF1000ACDF8739BD90FEC03F1DCC8E392BA9895F
-:10DF2000C918DFCCCA7DC530BED75096B8FFB689B8
-:10DF3000F2A3A4BB977594E4B300BF8C6EA0EFF579
-:10DF4000F48B11574B76E2F5B731F76134F8E8B846
-:10DF500004F0279E2B64EBAB890FF6080CFEA08B18
-:10DF6000FB5B2428023DE768F7054B2B5859FBBDA6
-:10DF700008A02285E3036D7F81AC6065BE4F1998D0
-:10DF8000C7F621CDF0CC697FA013E2FA73DA07CF90
-:10DF900087FDA939CE317F82E71EB9F74002D881CB
-:10DFA000770B78FEE3C7BF7B454EA0CF9DEF6CC4D7
-:10DFB000F3C6A7B9DCDD4E7AF11E763FF1F07DF2B3
-:10DFC00010BE9F073F3087E5B00C7EFADC48E8477B
-:10DFD000D7D0D26DAF84AE01B3EDF68EDEDF801AFE
-:10DFE000F0873D85B807A0B56BF3BECACAAC5D1417
-:10DFF0000F366E8FDA705ED179DB100F1FF4E58D6E
-:10E0000007911E7D78E2F72A6978E99B77E2CD5780
-:10E01000439C379E3E9BE3CCFA13DBFC607099F186
-:10E02000F4397CA276E4E76E9F3D91EAB78FDD3E3E
-:10E03000073C2B6DBD19D20894173794AB45FFF000
-:10E04000548A87D3C3FC970C047C740EB8283DFA1D
-:10E05000A19DE901929781F3D1EE7D3F78EF711791
-:10E06000D89DF53BDFCB806795D8B5F6168C6F8AC7
-:10E07000E80F9D6DBDE4BCE7C33E84B8135DFF4669
-:10E08000276A7CC8E677073F5F73476B029EAFB98C
-:10E0900063A968B8B7F98EA52CEF8E489DE36E3260
-:10E0A000D8EB2BE2F6037100733FF39716908F07BE
-:10E0B000C03EAB672AC6059E62FC357FBA4F847CA2
-:10E0C000E4C92B058CB74C3AAAB675D1F2FC5012B4
-:10E0D000FEDED1FC7B97E4C23D04D59D2CBE3748C3
-:10E0E0005C9CF333889F1C60EB389417837C3B7DEA
-:10E0F000AA5317EFEF966B72E0DEBDE06D4E1FF096
-:10E100004FF14DBE0FF0F712791C425B5777351671
-:10E11000631E6BF15C7522D0BD386CC7DF1F2CB657
-:10E1200011C941F558B1446CF01CA410C90E4F0739
-:10E13000B1C1337F39BB27BBA4F17AB40FDC138B99
-:10E1400014B8FFB6B8FDD92FA07DA914D9CFCEB58C
-:10E1500030FC14B71FFA1AF867A1AF08F30EBFB36B
-:10E160004531F87F63C3C6F2E56DC6724EC458CE22
-:10E17000ED3096B7C21D673A3BE2C05E2BAE131579
-:10E18000A7D839BD9704589B201E6C45799A56D163
-:10E190009E0FFBD1A79E7759E0FB9EBF30BFB7779C
-:10E1A000AB1DEF7BDBFF7B0771405EE10BF68DF073
-:10E1B000FD94239C0F71385A9FFDCE5651780CF870
-:10E1C0006F2F5EA6F9E9A17130AF17FFCAF2647A2A
-:10E1D000B75AF1F7534EED7EF679D8173BB575284F
-:10E1E000DA592F09410BF41B5CC5E86FE6D38A2D81
-:10E1F00046BFF89E44A66F7A0486EF4B1A8DF3BE95
-:10E2000034642CFF3C91F953F388EE7D26ECDFABB0
-:10E21000F569B0AE3E1DFBBEE1FBB95C3CF79CA2CC
-:10E22000F1ADC8EF6723AAEEFCD29EE8FEDD5D43A8
-:10E2300021AF02703122FABEC234AED67F5122DB4A
-:10E24000874FE1FB33BD6F88889F93A6DF2DECB32A
-:10E25000EB6A6B064FD7AD43258DFB538BC13F6AED
-:10E26000DA9F3A4FB7BE546E3D987A2BE62549F8AF
-:10E27000BB4C95739E7968720ABC17C3002F7C87CC
-:10E28000B85777F8376EA847EDDDF1A20EEFA58DF0
-:10E29000770F9EAE93D3BF952F3579AAE4F6C9AE1A
-:10E2A000899D8590275ED1C87EBFA922FCA31BE172
-:10E2B000F71749133B679A2F912291CA4FE5F61F32
-:10E2C000FD107E8F2BF0E4042FC043BBB809DE574E
-:10E2D000B47C8AE709569B7E47407BEEE3F4A5F5C4
-:10E2E00023165A7FF5CDCE32D04FB4DF57A07C2015
-:10E2F0006B23DE6FE23EC1E2B4F4FDFBF09328270E
-:10E300000A826FDE4A9B9E22E177AFC984791BF9AE
-:10E310008CF2AD007657EF66017FD7965A5AF937DF
-:10E320008049ED5B8679B7F4FB1DB1CE3B2F0A190E
-:10E33000FB31D3FFF79C7FE95F969E8FCCF506CC2F
-:10E340000AE2B9C4CAA554DFE9ECFCCAA30D789F60
-:10E35000A3791C0CC2E9F20D60BD5451BEEDDC6E18
-:10E3600020822D9FE7CD8E6465BCB710F895324AA8
-:10E37000C56564BA0AF8BE81CC84E74B42E42151FA
-:10E38000647A02E340DB12504F747BBA9E7902F844
-:10E39000AB652CC69F86F0F39EDD6A04EF79ECE155
-:10E3A000F1C96E0F2B97B7DB310FE6D46905F5E89D
-:10E3B000B2F04137D0A3FB79BB057E97F4D4F601C8
-:10E3C000059027D91D66F7FF9E0C0FC0DF7F8DB724
-:10E3D0006E99F581B64E1E817FC27A9AE8FB06D609
-:10E3E0005BB282E5910E1A509313EBF724B47629B1
-:10E3F0004A4D0EF829FF0BC935400200800000008D
-:10E400001F8B080000000000000BDD7D0D7854D547
-:10E4100099F0B973EFFC65669299C9249984FC4C14
-:10E42000420801024E42884851272160C054078AA1
-:10E430001A7F8AC37F80FC89B61B956E26266242AE
-:10E4400051C31A1110704051BA6A1B5CD46883CF53
-:10E450008068B1D57EB176BBFEECB223B088562081
-:10E46000A2A5B4DB96EF7DDF73EECCDC49A2747716
-:10E47000BFEEF37CE943AFE79E73CFCFFBBEE7FD72
-:10E480003F6786BE6BF5EECE67F017CC575C8C9D70
-:10E490000BB8BD1BA0BC58825757306671FA8DF679
-:10E4A00034C66CE58CF9E09FF388BC5B86FAE3B276
-:10E4B000F7FBF6B18C2D637E03C36779C0C00AE019
-:10E4C0009B4E689CC9D852858515273C17FA3E900B
-:10E4D000A6509931F87EE97629D401DF2FDB6864F4
-:10E4E000CCC4E8EF22FC5BD10BE5E25879150B199F
-:10E4F000980CFFB13DAE1DF4BF4A091F9492195B01
-:10E500006D62610BF4BBFA29ED776B5898E6D3F096
-:10E51000DC45637CFFB03EC6606ABF63EABA7C1E1E
-:10E52000FB34C65C0628C3BA87DED187100EFF21F4
-:10E53000FB695D6B5880FAB9A5B58A1D4F65ACF9CA
-:10E54000EED6CC65F03CDB7A4FE6B2A9508FF38073
-:10E55000F1AD8C7FCF605D7B00666BAA593807E612
-:10E56000B71CD69B5406E501293C19CB26164C2E28
-:10E57000E3EF53CAF87A7D71F3AB673D345EFD7605
-:10E58000ED7BF6EB548267031BA47AF6545C3DC026
-:10E59000A341C0A1E139781F078719CF4941DB6545
-:10E5A000580A75A4C3FC9A4E31B6014A4DFB2F1A86
-:10E5B00035FDB31EC6000E19498C99015F8F4AAC18
-:10E5C000AEAF84BE9B307F32B4C1BFABB1DC4EED89
-:10E5D0008E0AF83D7AC38ACC00B47BD801E52C01C1
-:10E5E000E0E930860E07A772D804E3244D8D96A982
-:10E5F000BEE23E5E9E6F2FAED992CDD8667D20D30F
-:10E600000E405C2AFBDFD401FC9E71066E40BC2CE0
-:10E61000D5F972155C2FF315F9611EAC95C3E1B104
-:10E62000B296092D25B179C5E6C7F1BB59EA0BEBC6
-:10E6300080CE82AF48DE3D1EA4DB217DC01A6BD7A1
-:10E640006C97681D2987226F8E41BCBF28B1DDD031
-:10E650006EABF4F19B63E0BBAD733DAC03CA6EC01F
-:10E66000935C86EF59A7047029DF3FFF8E3710CFE8
-:10E67000E549DE71F068DC5F29375A69FDB7FB6157
-:10E680003E1996965D3AA8CFB8BDB80CE91BD67D69
-:10E69000FB02787F97DD43E3655A39DEDDF705F34A
-:10E6A000D796E0F8FE3BDE80F18626277971FC0CD8
-:10E6B0008095CD49CF2E33B663ED12B67B3499F7F2
-:10E6C0009FA6936F9F8FE5325E76AE937CBB89F8F1
-:10E6D00036D1BA338CAC06E789EF4325B4657CFBB1
-:10E6E000A83EC4F13BABA514FBCB18CB9F2E4338FF
-:10E6F0001BFB795BC5F740A68EA5E37CE1BF613EBD
-:10E7000077EDABCC70C2F76F7F6E527429F0743323
-:10E710003688ED94B095E1B3B098B73789F6A5B3D4
-:10E72000327033B872B5EDCEEA7D2953012EC17730
-:10E730006586F8F8CAEA4B7140BB6F19F83A12F1D6
-:10E74000B813F103EB69BE00334F8DC35BDD790372
-:10E75000F6D77C4161A1A9B1F79FB79958A828566F
-:10E760006EA83F3407DB35B2C1F548578D7D1616CC
-:10E770008AA3F76F258D3CAE4ADFCD17742C984ADB
-:10E78000E49BEDB7217C86D62FC7F91F90D81E8653
-:10E79000F506168C1BBFF982535B8ECE339DFA892A
-:10E7A000B563DA76FDBFA7766C7A2419C739638F13
-:10E7B000243BC5FAF0BB2C99B5205ECE8674413D52
-:10E7C000ECE3331E5E7F96B19A3E6BACBDDADF9907
-:10E7D0003A030B13DC87A85F844B1078DBB6812FDC
-:10E7E0000C1E28370C1C24B8A8F4100F9F601CDFE7
-:10E7F00048EF180CEB604FFFDABEAAABC40CA83888
-:10E80000A4EEDF355DBE99502FEB34FBD9521EDDEF
-:10E81000DFC4561ED5C9821F347455CF8C2FF3F632
-:10E82000B1EF1B6BAA61FF9797F0EF8FDA9B8EDC3D
-:10E83000A7C4F811AC2317E1122D9B12CA56284F1A
-:10E840008E2BDB13EA5D09F5EE8472366FFFB92D6E
-:10E850009C2B7B19FBD4BEB64601FEF279667891FB
-:10E8600004E58D1D77D554039F6B2C1FF4C9C83F59
-:10E870000724AFC462F06BF2325F08E067F5460C24
-:10E880004B4B100E836FE2FE6FE897EC12D0B9B5D8
-:10E890006F5F98CAF89D27EEBB3E89BE6BE8FB9878
-:10E8A000BE1BB5FF621DEDE30DC5C7A81D00C07EF0
-:10E8B00002F0741393580A80345F09FC11F9646301
-:10E8C000DF275CEEB221035F1FE78367327DAF1362
-:10E8D0001F3C20D971DF45E90EFBB5C6E85D6DFF31
-:10E8E000D1E4817FC66E2C777DD1AE40FB7F6BFC7F
-:10E8F000641A03547D844DAE40BE1A9A80F2781B90
-:10E900000B4C4039F4DDC6710775D0EEA83EB283DA
-:10E9100001BC8A1D1B6A146877D416C99180874C84
-:10E92000DCD4CBCB69911D08CFE0A64709BE477365
-:10E9300022393A284F718479795C6407966FDCF448
-:10E940002C2F4F8EE4C8F07D41F0B99A6A28EFB1C0
-:10E950008FBC5FF31C9C8FABF33B31D697E54843EC
-:10E96000B2E37262871E2006FC70D1EACF9EDF03FD
-:10E970007058748F85F8D49ECFBF33CF4FEB0FFA0A
-:10E98000950AE0879CF4B91C237EAC901E9089B256
-:10E99000CB19C3872D77D0437C7E62CB3E94F71989
-:10E9A0008B4A88CF5F48F1B53BA6C59EBF4BE7CFEA
-:10E9B00076879DF36559E7A3F6F7DA48EF79D8CC67
-:10E9C000D703FB86F06B15F82817EB2977E8E89951
-:10E9D0006B9F4DFD7C28F9B69A647CB2A019F1B901
-:10E9E0002A89F48C5B77015F00BEDC2BE6DDBB6916
-:10E9F000422808FDDF2A313FF28D5E872F13F9C3CD
-:10EA00004B7F916FC7F5F69642199E3F15FCBE7776
-:10EA1000BE2FD31127177B77F17A95EFF4E6F3EF4A
-:10EA2000557993D1C1C7C97878C26E5C8745613E7C
-:10EA30002C2FAF2BDADD4E727B01CD97F97C99122A
-:10EA4000ACF7C4AA021DEA912A7E9442DF75587F72
-:10EA50000BF66F8DE1491DBF1DD79D867A00C87DDD
-:10EA6000586F9B33D08EF8043D600AE981420F68ED
-:10EA7000C7F5C6C197299169F8FEFF2338DD89EBF8
-:10EA8000FEEFC269047E11C4711B5B815FE8E2F88E
-:10EA90008580DF6629ACCFE0FCC28B720EDF2F00D1
-:10EAA000FE788B3DF000F6AF8EBFE8DE46D2FBD499
-:10EAB0007959FEEEE59A9BD8F07D96A8971DFDD07A
-:10EAC000B491811C3B6AE823BE78741EF3B623FF21
-:10EAD000D0B17A84A3AA5756DCB3E66D06FAEC9758
-:10EAE0000E99F0DC2DF932715DDD805713CAE1F922
-:10EAF00086D09EFC985CEC7584B6AE40BCDE50E2DD
-:10EB00000D7A483ED27E0BB65AA85DAF23C214AC34
-:10EB1000BFC2638799209E091F43371B42BB25C490
-:10EB200037A797DE5513434189F01EA4EF6FE6F433
-:10EB3000D33B9F917EDF7BB39BE8C6CC42669CCFE4
-:10EB4000687490DEC1888E98E29B32DF1683C32FF3
-:10EB5000C5BEB694475EFC17D423379A498F4499B3
-:10EB6000897617EBC9A0F9023E5F22FA50EDA5475E
-:10EB700032431BC83EF356203E1EB0F916D3FC7F2D
-:10EB800060F1E0FCB79B5997A90CCD0FD649FC4E1C
-:10EB9000CC87F53CC6503FBB5DE867FF5E7FCE8605
-:10EBA0007AC01B0EAE5F21A19880FF2D61BC7EC98B
-:10EBB0003ACBC768CF2C5927878D60AFB0AED9BE8E
-:10EBC000489C9D411405FD0504BF645B866C483775
-:10EBD00001FC2E19FBFFA3CD63C5327C3F05D10E8E
-:10EBE000DF17C7BE7F5FECDB45329F3F6BB378100A
-:10EBF000BE897CFD7D757E3D8FF9E2C753C749EC28
-:10EC000017ECB80F903E01EEE114D4E77F20135EBD
-:10EC100013E7EB320C3D6886FA456DB2E33E806740
-:10EC2000A0D546EB55E77B7BC6D095645F25F47F86
-:10EC3000D2D254A1E0FA85FDC1D669ED2FC60CB140
-:10EC400032D0C572364476CCB0F7C26E4DB4FB18E4
-:10EC5000FB8B31BE9DBA5F98474A98BFA02B8FA40B
-:10EC600020DE0212C79BC130B408F94EE2BC5578D1
-:10EC70001A9D3A01774E1789F0363AB9DC4984B7C4
-:10EC8000CB10C9C17E03AD46825362FFAA5C7CCC27
-:10EC90000CFB07E86E8B2411BD6EB9DB42728E99B6
-:10ECA000389E9B572779907EB719869EA67DF5AA38
-:10ECB0009121DECF9A875E227E55C8FD0A677F29A3
-:10ECC000EFC27667D238DD9F79454FFB8D4F06F452
-:10ECD000A15FCABBA95EE2FD9E69B77870BF36230B
-:10ECE000A461FCE6E07FB63180EF711DB7939BFB1A
-:10ECF000B5F6F019F8575F16E31B67191F27D8CF31
-:10ED0000F904AC74158D736B12DB00FD36E9241F1A
-:10ED1000EA4F4DAB27863A383D99703F3588293503
-:10ED2000E9C02E2C8BEDFF26DDB122B4AB1A4C1BB3
-:10ED300007E564AA3F8CF618437B0ABE5B8D1FE58E
-:10ED40000F877FD3C6DFFE19E7DDB45F4B170D31A8
-:10ED5000FA912E4AF87D1C3DE5C7E884F46FE41F64
-:10ED6000D52C344EE27E1A2C5B6A0643E8A769165E
-:10ED7000FE8BB4439139483FB6F23EB6049ECDA710
-:10ED8000B8FE316360D7EB68073B6A06737099CDB4
-:10ED9000AD6BA79E981AC3AF3ACF2B0636C968DF72
-:10EDA000A97A4B9C7D3961C1E4F8E77DF41DDAABAB
-:10EDB000385E045FE1BE51B8BCDB2CE41DC845E2FF
-:10EDC000CBCB7BC6935C44B985FC4DB57791DF21F5
-:10EDD0007F79C659759B13D6E94DADBAC9398D8F68
-:10EDE000437A3E1A49570C8767A2DC51DBA1DDDB71
-:10EDF000621DBD5DD40FB43585F30F45A2F28A5F65
-:10EE0000E8776DA0F929442F6B77E4133F56FD3561
-:10EE10000DC24FB542F8775608FFCECA2D46E68997
-:10EE2000F76785B4E506C10F1A5984FBB9F6427D30
-:10EE3000BC5FA79A856D588FFE1D7CF669BF6F6613
-:10EE4000A1590AE2B7FFA231FE3DEBE5EBBD5DE063
-:10EE50007DAB99FB7566ACDB257367155F6F4A99CF
-:10EE60002FFF7E94236FE9C9FFF01F024F2A5C2C0D
-:10EE7000CEAAC508EF24B4D7B0DDFD4682CB0990F9
-:10EE8000D7FB84DF6301DAA16D81CCC242048F3DE0
-:10EE900077816D387C37BC6AAE477AE97172BD45BF
-:10EEA0007D3FC7A9A732F98310EEED16D2BB01CC86
-:10EEB00053908E2A0A5439CAA6A01FEA633DE8631C
-:10EEC000506EBAD11AC0FE22A837407987E05F3B66
-:10EED0009C06EA4F2D47ED3C412F300EF5877E19F9
-:10EEE0007F1C1D3C156DBF49E8939C2F6C5E9544BB
-:10EEF000FC2846B73A46745BE237A03FE955C14764
-:10EF00005E0580929DD567E67C44E1FCE9D553130C
-:10EF100089EF1DF96C35F195737549CC28517B9FAC
-:10EF200084F52F1A43F7417999F0B3BE2A713D3128
-:10EF300078C046FD3418025BD1EFD0F0C2382F60A4
-:10EF40008CBD6408FDE869AC7FCD4C7EAD86643E27
-:10EF5000CF8657C7109FFCA93EF4EC8FC94F6124A0
-:10EF6000FDAD21C99342F53F4F6558DF65098471B6
-:10EF70001F6519B95ED960081739008EC7425C3F1A
-:10EF80003E868C06FB1FB091DE03D3CCC4F18F7795
-:10EF900067783778627039FEE024A2FFCD7A8EB7A9
-:10EFA000E02BDCEF794CEF9F9309E5632F967AC154
-:10EFB000B26467FD86B001E6D8FC30D7E796EA3C3C
-:10EFC0003B5B9137BD66F16AECD18756D6627DF323
-:10EFD000EA75D7211F1C6D3F233F8FF7E79E6143E2
-:10EFE000B9648FD617F48561DC330313BC243E99D2
-:10EFF0001B900D7462E76D4FE801DE485F07F44433
-:10F00000BF97DA3FAE17ED43942F384E33F0DFA8A9
-:10F010009F99F86F5C591EA9CCF1D9FC6A86D0DFA4
-:10F02000B4F5B7A604CEE1FE6AFA87DF1F6D25F8B6
-:10F030000E11FF633DDC7F7E42EF5B8474EAA80E15
-:10F040001B96C4C9EDA4542ECF971A859EC7C286BD
-:10F05000F87DA7D6575469E95C7D9A5339BDDB0624
-:10F06000391F1F5EAF13FBE13B46945BDCB503F633
-:10F07000F629EEEF484AF550FD8C5361C35228E75C
-:10F08000AD0B1B568827EE0B8077D804EB3EB1D52D
-:10F09000C6F7338001FB59319D91BEB242063DB5A2
-:10F0A0000CDF7BFA238097932F3A387DFD09A0026D
-:10F0B000F05ECC443B23E8B5C0B75EEE94C2A8F73F
-:10F0C0002FDE62DC6DCEC77DEC936D88CF1D12F113
-:10F0D000ADC59D95455BA1BC7AFF64C27FF2744EBD
-:10F0E00097AB430E927F33041F5C6A0C1948CF7EA6
-:10F0F00096FBF1A07FD2971BE0A3CCB2E17040FE5B
-:10F10000ADA18790360E31A34FF0D3BD71F1878248
-:10F1100038BEDE97F03DE8795AFA08AA7287F339CB
-:10F12000E6C9403EA7F2618BD33F2D95F050988100
-:10F13000F8057C723EB94F22B836B2162E3704BF9E
-:10F140008F8E2BE4C54939C8E59271133DE7A5E6DA
-:10F1500013DE56A3BC21BF3AB7FF46A38379A93A71
-:10F1600061278C4C07D70A3A6838C5C257C2780D58
-:10F17000EB58B8710A7FDAA6901CE4F2D024E21DA5
-:10F18000261E0FF926B998280787C9BD047997610B
-:10F1900010F24DE039DEDF8DF27EC6BA908C7ECF64
-:10F1A0005CBBAF32635A4C7F697EDF64F25C86657C
-:10F1B0003F2BB0A2FFA6F25937FA7FC15EC77D652B
-:10F1C00001B8EC42F9A2EAB76EBE5EB781D3AF5E7A
-:10F1D000F1B3522BE26590ECD9A13466477A54E141
-:10F1E000B9C306DF95E1777CBF45BF37B1CEA4B880
-:10F1F000EFAB5E35135F3DFF8A2D6424BD2390E79E
-:10F2000080FED23F32921E7AE6551BC9CF3342FEB2
-:10F21000B954BF005B4FF85927F01A645563D0BF4B
-:10F22000CAA479639005AA7A58A363347FB7A8CF9C
-:10F230001FBC91D39591ECC9F38EC8F7B10CF36163
-:10F24000A85FDF25F0DCBC7F56E9BDF0BED96FF5C5
-:10F2500072E8074A915E8DF25D37A2DF658EBC6E63
-:10F26000E86E5847638ED56E844FAAF3FEF53737A4
-:10F2700043F9D3FD7A66443CEF9955C70A46E7BF88
-:10F28000AB42FA6391B8FDB266AFB6DCD8A72D37B2
-:10F2900033E558248E1F3F9E6A739D9C44BCC37BFC
-:10F2A00011E8DB686C39B50BE66BFCA991E4514BB6
-:10F2B0006A20949A867AF9D09B086763DEE753D078
-:10F2C0008F5195F7278AFB9CFF01F3E2BCCF9B2B64
-:10F2D000497E9FDF6AF604E3F857B3A0FFDEDC5AED
-:10F2E000AAEFDD66F448BCBE765A05EA833436FEE2
-:10F2F000997400FFE62D733F25BB09B57628F7A268
-:10F300007E89DFBD2085DA517FDCC2E5DE69D01F52
-:10F310004D309F9308678C7BC803734CF09FBDCE24
-:10F320009A09C85F943F2B7EC4FF03D8559CBE7BCF
-:10F3300020CAA7B99FE75AF4F38C253FCF01E41BFD
-:10F340008DA688A112FAB9FACF5F115F5ED9BA848F
-:10F35000F4FA989E6B243EB2F2EE00BD7F7DEB3551
-:10F36000B4AE93B06E84CFC91DDC9E5B996D0DE188
-:10F37000FCAE7670FD77257C2749C3E19208874F64
-:10F38000B65FE3467C7FC2F878C13EAE277C621F41
-:10F390004C26FEE36949463DAF79CB359F22DF5AC3
-:10F3A000B943F6A21C67076CE41759B963F684E504
-:10F3B00056ECE7CBD44A84DBCED97699DECBFE106F
-:10F3C000F7AF0C5E0DEF959D977B709F1CDE61E49F
-:10F3D000F373989EC6F95FFD6799E85ED1B100EAC4
-:10F3E000ABBD06DF04DC6F9EED7BE6205C3F999FA2
-:10F3F000A5A3F6CF4BCC8E7070B4A6E3FB9592E23A
-:10F40000C7FD55BF65556DBC3ED2952A137E2AF3C4
-:10F41000D6A547AC44EF37A29C6BDCA127BDEEF02C
-:10F42000820F7F73B32B46EF2BE59E1B67C4E91B4E
-:10F43000CDDBBF2DE8012436C069A58093316F5D17
-:10F44000118EFB4DF4BFF2BE96221EAFF9FA7D106D
-:10F45000DDDFDBF97EF833C8FB8BE8EFCB766AF4AF
-:10F46000FBD1EC20D51F6DF232DF1E2BC5157D6858
-:10F47000E716B814AA2F400202FA52FEB076EF3B0C
-:10F4800030FFFDA9018B0BCA79CC578A78F50CD9CE
-:10F49000AB409DC42591FEC3B61BB93EA970BFDC2D
-:10F4A000E634F6F486B879E68AFE607FBAB09F3318
-:10F4B0001FFCE94D845F53EEE75378BCED2B8A5F68
-:10F4C0005907785CD3EAF533A48BE681F96C594986
-:10F4D0008C1F367B39BF1EC6575C7ACEBF5C43D4C7
-:10F4E0004F4D1AE767AA3F785B6B12F9FDB6B94238
-:10F4F000666EDF0619F2F3EBCA651E8F117A895F1B
-:10F50000F8D14CBED719C66B9857F68E83F2A0EF90
-:10F5100078672A94DF299FED95A16CF53DD9558038
-:10F52000EBF6EA45FD58F227BE3DB392F493EB7C2F
-:10F53000328DCBEA93C95E1FF4BDE75A06E35ECF76
-:10F540007CA927608C1A10D688C7411C1BF0655413
-:10F5500002D35D7176D3B7BD73534FC4CB4B1F97A6
-:10F56000FF688FF789B8C24870F0A6565E85F0BD77
-:10F57000FA2A8E87CF9EE7F6C76766EEE756DB7DF1
-:10F5800066E372C6EF52FD847DB9C8E7A3E5DB8A66
-:10F5900035716297A12F17F7D96F256D3FABBB74FB
-:10F5A00014BF5DD5C5285EFBD98F5ECE457EFBE9D5
-:10F5B0009E977397C4CD2FF13BF5798B3A9EF04B14
-:10F5C000A97E4A97885B2FF11AB93F70143FA5DADC
-:10F5D0009E6DE1F6D859E0EE4877EA7767EB937CC9
-:10F5E000A8579E6526E2674B0684DFD3E72B74A1FC
-:10F5F000FDA07E9FD0FF23827EA47E89EC734BC941
-:10F6000010F1D75526FF9B633C98B7E223FCCC450D
-:10F610003C4A48AF3E03AE5B11769E51F1DF8178E4
-:10F6200058DEA3C5638E4BC433EC2EC2BBA1C9AA5E
-:10F63000A07C48EF10FCFA7B3AB25F0C596E2BF2BB
-:10F64000A5AB8B923A312EEF4A4A9E827EF59CAC56
-:10F65000626A1FACE2741D4C67E4B7CA642D12F1F4
-:10F660005B3BF783674F6776CC03F9A98BEB0D6E95
-:10F67000E6DD22933ED827513C40AC5FE5EB482FB6
-:10F68000C8E73E934C442FD28044FA9DACEB5B8498
-:10F69000FD8E463F5B5CAA5DCDE9275AFE1BD1CFAC
-:10F6A0006E75BC61F413A038DE12B76964FA117E7E
-:10F6B000D74B6E3F5A1CF17B26D50F2DE17A6B4557
-:10F6C0007FB5266B589E42FCE1F3787FEA76D03313
-:10F6D000D11E51E38E633A167BB89E3E1841BBDCC7
-:10F6E00072B989E4DC0F7583F9A8CF27C62101B36D
-:10F6F0000EE4F7C863C8AFD85AE53F911A27EF0F59
-:10F7000070BBA1E96E1FBD9F35C0E57B73A181F47D
-:10F71000CEE67E2988786EF21B42A67C8ABB2C2618
-:10F72000B9FDA0D9C3E3289E768AA3FCC0C3E32C0D
-:10F73000513F6A64E7BD486FF556F23B24C6635EED
-:10F74000FA8BCCC71FC768FCDE521EFFE99DEB2178
-:10F75000BF46629C8D7569F7AF1A67396B03C0C0ED
-:10F76000784B369A090F593287334B3171F9329CF5
-:10F770000F90BF367DBA408C888744F73590249629
-:10F78000B344BD1ABFB195F8F351C35D94BAFFAD50
-:10F79000A4697F4DBEC33D3FC47C8651F31D82C624
-:10F7A0005AAC37A1F62CEA71DA206FD5B2CFECC192
-:10F7B000F84EAC5E01BDD1D42F89F15EBE7636889D
-:10F7C000E0B3923A7EE7069F95E2C99AF1E2E7A795
-:10F7D00024F4AF87FEAD1ED13EF8E3B9B30B296E1A
-:10F7E00029EAA50D3E98DFC37A6D7F0452F13D16DC
-:10F7F000D4F10E67D4FC70E3CC98DC073DC09A3698
-:10F800002D26FF1FF8B0B6E73218CB62FFD2807208
-:10F810005595E3CD2E9EFF90B85FD3D338BF07FD3B
-:10F82000353D8DE40ED76B6B45FC12F4D939B8B574
-:10F830009AD7F919C62F415FC84A237DE1F3930790
-:10F84000117F0B3E237DBEF982C2FD2EA077A07EE4
-:10F850006E1274CEFAF5246F553A582DF84FAF0357
-:10F86000E43DD2EB01695A90E8A225F706C0C1DF5A
-:10F87000A7F90A711EAADD9538DF2BD3B87DDC5CB1
-:10F880005CB5B508FB7F4A6228EF37141F4B47BDB4
-:10F89000A479E0E3F4E571DFADEA7F94E0B06AAF0C
-:10F8A0007EC4F55F99C6E39D4DAFBC48FEC1CF4213
-:10F8B00012EDE57A25D43D03CAF5F53AD4D058794E
-:10F8C00068F1CDE4EFAF33B071B0BEB1288F701ED8
-:10F8D0007BBF139C81F619FC93E0D536FF0A927B1F
-:10F8E000DBEA4C568C3B34172FB983E0604FF22192
-:10F8F0001C36145765E2384DF3E7D8294E00FA1547
-:10F90000D637DD7D0BF94DD4796DE8D7D7A0DE551C
-:10F91000017AD63FC1BC739CF36ABCB0FFC6C8FB7A
-:10F920004AEFB462DC7864FEFB5E3AC767A7E40F77
-:10F930005E5F4E7E4216EFF7CBEBE7FADC0D690611
-:10F940008D5FF8863485E0303338380B69EF352524
-:10F950006241BDB799F9BE40FB92F9AD9E3D842747
-:10F96000CE475C6D1EF21F995C911F5E86F53315C4
-:10F97000B21F98127904C73DD3EDF26E60827EB15A
-:10F980007C774908F9E8EB69812588DF0AA13F9E69
-:10F9900079E59A52F4B3A9FA51F72E7308E384DD9E
-:10F9A00036CF3FD4201FFC83C2E3E2A6A1C1598811
-:10F9B0008F3F3AA9DF6E73A81BF11FDCA4A7FA578B
-:10F9C0006C8146A4CB53F36B8A282FC71A2CC238FC
-:10F9D000B0DED5C3504F007381FC0926979F61BCF0
-:10F9E000745670B122219F4FD03B6689FC52629EB3
-:10F9F000F0BE4AB0B1714005274DB4053A2FA6C6F6
-:10FA0000F490237F5AA8E04B553FD199783CABBA8C
-:10FA10002E89C948F7EB87DED4A1FFDA3548FA6BA7
-:10FA2000639F44E33416BF40F9626B445E52343F37
-:10FA3000488950BED4FA348BD0033BB91ECD06C9D9
-:10FA40005E66CF717C3216A13CAA981DD14EEDD4D2
-:10FA5000FE0CC2EFDE28FC2E20C1A87E539AAA5FBE
-:10FA6000DEA7F5D78B71374B833E19E15A2A69FC23
-:10FA7000C5EA73AFF83EE5D0D01CDCBF43AFA87930
-:10FA80009C3C4F73EBB4895E549D86E571F67F31E3
-:10FA900007E906146DDAAF4DFD9796C7F9BCD86734
-:10FAA000FFE3799C5EC9B71B9E2FA739B4799C5E92
-:10FAB0000E3F35CE9698BF792633ACF07CACC8CEDD
-:10FAC0003D489FFD46CAF3AAEDFFD9FB281F6B4DA9
-:10FAD000AC0FE390897A469BFD3B61A4FBB3A74F33
-:10FAE000EEBC9F611EEF4B5ECAE748D01F12ED844B
-:10FAF000DDD82473747DEF37517C727D2F5AFE1F41
-:10FB0000D7F7B83E1FDCC3F307547EDE2CECB3B34B
-:10FB1000F5E79251CE1C4B53F5CF843C87A7449E0A
-:10FB2000C3C0C8790E8AC817027D3D4874B28FC71A
-:10FB3000758E3C6D21FE71CEAEEC467DE9B46DE86C
-:10FB4000FB082C45E8499D078C1EE417C0EF887F11
-:10FB500007F7E9799C06E33618C7796D8288E38850
-:10FB600078D1AB16D25B1A923D29F8BD1AA7F9A934
-:10FB700090370D493C3ED36509FC3E6D84B8CD2ECF
-:10FB8000A17FED82AEECD8DFFB4611C7060681F6F9
-:10FB9000CE83393CEE20E2366745DCE678B12E6C48
-:10FBA000E07E08F25379BA149609F59EF7CD210F3D
-:10FBB000F767997420F797AA719BD7B89F6AA988AD
-:10FBC000CF1C5F3087F28796637EBC8C7E0CEE671D
-:10FBD0008EE6EB33BB0ED7B306D8C5366431418011
-:10FBE000FAE5F05AD249A84F783AA14CCAB2AFA769
-:10FBF00006C65DD2A9237B646997D65F7E7EC31D4E
-:10FC00003528BF1FE8E4F1C7609744F27B29F3B9B8
-:10FC100051DF50E9615C7A2AD159B053E7C371AE24
-:10FC20004CE7FE04007D88D6279E9D7AE16717F396
-:10FC30006867BA303E75127F3E60576A4694CBA221
-:10FC4000BF4E7D8BA912F5D81C1DF979CF1B7C7591
-:10FC5000E427751611DE3A6D2D5D35BC9EF6CA7926
-:10FC6000F3909FEAAF54B8A2C73C4EE49363D245E9
-:10FC7000FC2661BDCB7BB4E5C4F8C3AA90B6BC94A6
-:10FC800005C667E23985BDDAF763D239FF3FBF2188
-:10FC90005FF8F9BDE4E7EFD47B7E958F7CAA5B210A
-:10FCA0003ED99ECDE1A5CBE1CF0247751DE9070EF8
-:10FCB000D02B68BE7CFE0557BA2494979D0E4E97B4
-:10FCC000FFDD7927CE77767A11D71350B9C37DD46B
-:10FCD0002D8538BCF8BC2FD55FB1225D6B6F46CB4C
-:10FCE000FFF3F626A7C76E59EC373BF19F2522DEBE
-:10FCF000785CF23E1DC6F756D00B60DE4BBBE5329A
-:10FD0000D44F667DC74AEB687ACD1C32427DE3BA98
-:10FD1000482EEEA3A6AA4851CB0870C5D92A2ADFDF
-:10FD200082764B5C601FE0BEEDD2C6A186C7157D12
-:10FD3000F7A6A7A11D727CDFCF10DFFBCC2497E0D4
-:10FD4000BF0E1AD1DFF14A3EE94B5352021DE9289A
-:10FD5000CF93C23B9FC947FD84EB478D03C65DA887
-:10FD6000FF2DE9D49EAB611BB5712ED6E5247F062D
-:10FD7000EBD5BEC7F32B9AEF86C5BDB89CDF6C08E8
-:10FD80004C40BDEEEAAB787CFDF42A1D43FC2E9579
-:10FD9000BD2B908F9C366BF5EED3368EAFDDE9AA86
-:10FDA0009CF116219EA3E56178F616219E97EA58EC
-:10FDB00020BE9F46C4F354CC4EE7783EFDE2E545B5
-:10FDC00088E7CFF75D5E8478DEACEFF1E1BE79C6FF
-:10FDD00019781AE17362B69FF42635AFF252E9B191
-:10FDE0003F811EFBFFDFD1635D7CBE5FA21C3C1C1C
-:10FDF0008597560EBA0C9E6CE4874B4CC6AF958720
-:10FE0000F837A23FCD64247FC46B7FFAF221946F50
-:10FE1000C10199F40FB5BFD794C058F417BCF6BE12
-:10FE2000DB1B9446EFBF45E8556E130BA2DF43D5AD
-:10FE3000F755BD31911FBF2FE0782ADD578B7AB679
-:10FE4000EA9FAD177D9A425F72FDF42989FCAF26C7
-:10FE50004F1FCFAF3FB0D88EFED95321EE8F6D7AB2
-:10FE6000B194FCB5AB42AF8731FF890D4876B41B26
-:10FE7000563DF57132C6B3C10EFD243D2EBE325B38
-:10FE8000D8A1A742C79331EE0DE3D7A05CB6B886E0
-:10FE90000C48BF4D609F4113D6A40CD1B9A22617C0
-:10FEA00023795FDEAFB5D7D4F8E436BF81F8DDB68D
-:10FEB000012984F659BA21909F8DF28965DB4F5A4A
-:10FEC00062FBE577E93E17C62D637161DFEF715E76
-:10FED000AA5F27B23585E830A2673ED203B6DA04BE
-:10FEE0005FE2F19ADF6D778478FE126FFFBB503EC0
-:10FEF000955579BD429CD35B21CEE921FF0E27F0B9
-:10FF0000EFF87234DEAC9E47037E1E1E29FE1D975D
-:10FF1000B714FF7D131B12F979178D9A7EA3F93A56
-:10FF20002DA51E98F79ADBAC740EB119E8BAB52C62
-:10FF300046870D62292A1D3609BF6E73FD31B20353
-:10FF40009AF1FC05EA555E4E870D601F617E67E2FF
-:10FF5000BE657DDA7CC6D1F6716986761F47CB7F98
-:10FF6000233FE6CC0CEDFE55D7AFFAC1A3EB1C90B6
-:10FF7000F8FE4A5857A25D99E8BF56EDC24BE56BB3
-:10FF8000DF89CE87C3235AFE1BF3B5DB3346E36B11
-:10FF9000DAF8C05FCDD712E30485DCFF8D71028CE7
-:10FFA000DBFE77E3049F7A7AD2753C4F5F133FED17
-:10FFB000925AAE338DC5B8228F2F37DA8C14874D05
-:10FFC0008CAB367BE68838E2E06FAE40B9B95FCFE4
-:10FFD000509ED75B5752BCB2597ECE80470E87C524
-:10FFE000139583A4B7FFB571F5F5193617F1230FF3
-:10FFF000CBC7B87A625ED1EBD62F530371F8AD2A26
-:020000022000DC
-:1000000001857F043A362941167F5EAD3783EBC107
-:10001000AF8BFC17B781E7B13F6C033B0BD6E7D63C
-:10002000F1FC9CBF4FF36FCE48433ECEE1F7C42BAB
-:1000300037313C77F484BE8FF844B0D1EA457EA7CF
-:10004000FA55A2E309FBF352E9FAC709FBFCC77FA3
-:10005000E37DDEAFD2F35F1BEFDA026BD5D03FA3B7
-:10006000B8D6DB18AFC91F4EA7A3F5331ABDFE22C1
-:10007000C3FF6606ED33DF14CABBBD447E62291F91
-:100080003A8EFE1BB6DFE8417BC224CE65B08D9967
-:10009000224FD25B319FF285F9B906F5FCC7687A29
-:1000A000DFC7D1FDCEF5BE8F47E53BFF35BDAFCDF8
-:1000B000E93F8E72F644A5AF08E5E20336983FDAD1
-:1000C000733F328E78CE423D0F00F4C4CF9B3CCFBD
-:1000D000E3DC8974F587047EF987FF257EA977FF25
-:1000E0008DF865FD1F93D1AF397A3F419EF75B359F
-:1000F000E8137129867121751DCD833CBF2C5DE409
-:100100004DA9EFBF127AECED6E5F861B9E9F7F605C
-:1001100032B114507190C650DFF25BC9DFDFD4C733
-:10012000F3409AD6318AEBAAE7289BFAE733D4EB5F
-:10013000F6A706F2F1FB073EB406E514F4832F6040
-:10014000A8CF9DF980975B5203E3B0BE795D44135D
-:1001500057A8B8F8E57AF457C07CC9FE7719B5E717
-:1001600029E6BB393F539FD7097847D7E5E2F364C7
-:100170007D7208F5408B6790FC444DFBB9725621A7
-:10018000FBC81FCFD638E97C44D3FECA523A6FDE93
-:10019000672E453DB6E2A35A3BFA1F3EBFD24579D2
-:1001A00004B9726415EA51AFA70566E27C6DE5A15A
-:1001B000B9A887E6811E8A7AEDE7FBE69606E2FC9F
-:1001C000D99BD19F0DFD6EB669FDD5CCC4F3C0EBB4
-:1001D00077F33CDF576C8139D8DF66339F6F7093BC
-:1001E000C86B167EECC4FDAFEEFBE839C75B4D145F
-:1001F0007756F9C2663D0BA05C53F94989C8830361
-:1002000078F03CBC81F93C9F4394AD2E6D3EE2A951
-:10021000F4D925389F12378F0B2C370D49E8575FDB
-:100220002EE2ECD7887C09353FCAA8F8BF8BEDD900
-:10023000BA9A587CBD00BFB78B73BF3C0FC67281A2
-:10024000EBC7057603D18D0DF617F93F806E103F91
-:1002500033870667E179A2C2DEF04C84E76B17743E
-:10026000040F65FEDB141F4941B4413F633746BAB2
-:10027000C7A39FC4FEEB2B112F9E1E7B15826E7FA2
-:10028000AABFD14DFEEC9662B41BABFE59CFF3FC76
-:100290000E58C8FEEFCD6DA03CBF331F1A473C1768
-:1002A000A23E83EC3ECAEB2BE87F8FFCF4B6FDD276
-:1002B00088F99A5D6E2B8F1F0507297F8CCD74F10D
-:1002C000F384073EA2B8AED2AD9087A253EFD3E13C
-:1002D00039A8603B23FFE4B85EBB0EF19227F247DA
-:1002E000CEBEF69F53026487A87EF910CFF7D147A0
-:1002F000D6A35DA5B447AE821DCC1AF73B744D253D
-:10030000D8DF5013CF5BB730A493BCFEB1F77D0BA1
-:10031000CA795D762621FF79754D1EF943619DE30B
-:100320004658E71D6E9E9FA31CB0E8506E299B188F
-:10033000E5172A8EF42A9AF7A350867ED608BA517A
-:10034000E38D305D37CAA3DBDD811D88EFE8399886
-:10035000D6247E0E469CBBB4B57EF83C9E2FD96950
-:10036000E0E70C0FBD366901F9E5BA1509F170DE59
-:10037000B138CF0EEFF78A7D6B530699DD1A0FFF68
-:1003800043944F597080E79D297A4E274AB76B17DF
-:10039000FAFD2EA404286FF4CACEB04CF12AFB89D2
-:1003A000476A3C7176CB162E479AF6727B39D14E4E
-:1003B000F926F971D0ADD54BA2E5BF915EF27682F8
-:1003C000DCF8ABED0FA6B5DB12F593443B6D985E00
-:1003D0009DD0DF687A8A9AB751151B87E8E1759B33
-:1003E000AA070535792D555671AECDA4ED7FAF8B9B
-:1003F000F30935CF25BDC3D38E79E3433F60E4478E
-:1004000053F36D8255DC2E08EA4C74DECDCD7A288C
-:10041000CF660C0B4B12E9F7113AD79981F936F0F8
-:10042000DD07EE027E3E8579BB64E2871E09E76D3B
-:10043000C63C0DCACB0C6D5D81E3DC60A571CC9828
-:10044000A7311543EDBEADC83F67D5F3384316C895
-:100450005BA4DBAC424E87E63A9EAFA1E663A8F907
-:10046000132A1CAA047CB3C6AFC847FDBF5B0AFCB5
-:10047000483D4F1B7F4E3A7A3E7A55019D27899E13
-:100480008F2B64A2FED2CE4927C253CDDFA8B2077C
-:10049000EC9969C3CFCBAAF41187379AD7B6035C1E
-:1004A0005FAFAA37D0FCCFAE9A477EC2B3AB740C15
-:1004B000F74DD58091D35BC278DBA2F76084CC7412
-:1004C000DF85C0FB37E9AB80CF62F4C31E6AAB990E
-:1004D0007A02607BB8CD4FCFB366A94FBE8CCE2BCE
-:1004E0002E42CEF465E6B65ABCA7E0AC6D2817EFF5
-:1004F00039F832EBFE6F53396DE8289693B39EFFBF
-:1005000036DE7B7076DCD04EBCF7A0705B25AF4743
-:100510001ACC62ECB2CC8A6F0769DDDCAF342B7683
-:100520003EBB1CE1D3C822EB07C97FC3F3F3319F65
-:100530000FF1E0B61A489F718B3C4A562DF22A31D2
-:10054000C202E58ECC528A475B9967FF20D667F3DB
-:100550007340504FF4DB318EFB7D4D02AF2C5BF5C9
-:10056000134582C89F3AF21DF47D948FEE3786B80A
-:10057000BF8A8FFFEE8B93297EA4E6873266CF5920
-:100580003899F2493465F57E03A6D873505FE8D0F8
-:100590000BBD5494535302F333E3F4A27767FF5D2A
-:1005A00009EE83D32FDD5B887CE91A03E8ED23F0A5
-:1005B000A17FCDE27CE8ACDEDA25819EF65E72E0BA
-:1005C00016ECE77DCBA2390E58575D6AA5C181F3C1
-:1005D0000DFE4846BE9826F0ED58C8E7E7A8F64B52
-:1005E000CBA1DF0E33EC5FF83E2DA0F8288F3EB094
-:1005F00050BA01E6DD21717E0B1FA5905D52EC49DA
-:10060000C1FCE406711E5216FBFE8ABE4D32EAD3CF
-:10061000BF6AEB9FA114C6E53B88F8F17BF9ECF6C5
-:10062000F923F82D5B3339DF5E207B26231DAD9740
-:10063000FADFAECDC4F79C1E6727B796635EF1352F
-:10064000969672943FC3DEA7C0FB92B8B291B76B87
-:10065000300DE5E2F9649F25B02E13E33E8B3FA6F3
-:10066000B8E4F7B3DE3D8A7905EFEA7B6625A37C23
-:10067000C917E7FA855FF0CDF1AA5FD0C4CB93B874
-:100680005F309AAF3599E78BD52EE4E7106B453E86
-:10069000C21C3B3FB733A73CDFDB0153BC8E0D29A7
-:1006A000C8F7E6BCEF4F46BB9D2D0C94FB278FAEE1
-:1006B000CF30B7DE13BF5FE77AE2CAF0EFDA626DE0
-:1006C000F9DB5E6DF9FAE97F1E1F5FDE65F16DC52E
-:1006D00075FF54E2F98DC12B989DD6E99282A877D7
-:1006E0004C7A394B9CDFE47978FF28ECA297A7334A
-:1006F000AA4FDF6BDA8DF9EDAA1F5916F593DCCC02
-:1007000094E7E4F705A0BC1A92443E9F8B6225EC67
-:10071000A53BEC1C7ED0D600FDBCB4D843FB23DD4A
-:10072000AA6357E11E2A37911E5231C6948474730E
-:1007300048D09D7A1E57A5C30A85F9313F01865ED0
-:1007400088CF77F5F683E83F0E7ECA18C757A542D3
-:10075000F985622CC6DAA9FC98A0EF43624EC11F4E
-:1007600028B49FDFB019089FF2CFE55D282730F647
-:10077000827EE1731B27D2FCD4FD03BBBAD0954E19
-:100780002E6BD1AFA2C349140B7D42A56FD480B0AC
-:10079000DD18FCCF7CA273E23743D3F8FD09EFE507
-:1007A000737E32B4C929CE7BF178588E29DAAF0F27
-:1007B000FBCD8C8EC3CF13A58B32548575B0EE4F15
-:1007C00032F369D34A033FFB03C965AB3780E318B3
-:1007D000924D740E46DD37F6CEDFBE5D7B05AEB3BF
-:1007E000E87BB4CE79363BAEB318C8BACE494F5F7A
-:1007F0002AF5C7F78F9CE4F5E03EF94ECD2B3394F4
-:1008000038BA81EF1BF9F716EDF76EF8DE19F77DB0
-:10081000327C5F32FCFBA76CA6B06E0AF653E1890E
-:10082000103F0FD362E68975C9E9FCBB7922DFB3BB
-:100830003019DAA3BC29D6E663B0E95E13BFAF4333
-:100840009B7F718DB42E13F7D55C53E34004FAFB04
-:1008500099C0DB35BAC057783FDDCF16151DC6FDF0
-:1008600056630A29680F5DCBC2EB1199672B034FC2
-:1008700038C6123FF80BEE8B263930DE09E5D3FA85
-:100880009EC23BF269BF5CCC9C367CBE2A5DA8F35D
-:1008900045FA403A8BD247C2BCA378BAAE8F12D584
-:1008A0007680DE834F550F024B9AE7137B7262EB23
-:1008B00002229A636A29443DE467ED41E21BD7387E
-:1008C0001EA1BCA5336302AE2CC07FDD655FD0BD29
-:1008D00026CCBD783CEAF730DFB4ACB4FFBDF9AA52
-:1008E000FADEB07CDA4F0D9A7CDAD1F6953A6E33A7
-:1008F000E3F7D3CC1AD845F9B1CD0BAD5E3CE7D0C8
-:100900008CF99DE5143F223D0ECF01D33D2792493E
-:10091000E85D979A77CBF7616FA387F4B7281F1725
-:1009200079E3BDA57CDEBD7778D47B4EB87EB798E1
-:10093000F17B52D47B4E96DBA95ECD2FEFDDC5FD5A
-:1009400078BD2F8EA7F350A0BF91BEC052747C7E9D
-:10095000F9DAFB55F04F4A8FE5436FD6737D739BF1
-:10096000CE5B8170DE86719EAF89EFDE94A5F59B2C
-:10097000A8E544BFDE33CEC02D59E80F28F1E54A83
-:10098000403F4B0DDC6F07F4B51DCF4ED4B096A79A
-:10099000F0FEC0B9ACE5D7BAB1445F01A2AF495F80
-:1009A000F07B0563F4B598D3579098924A5F51BA9B
-:1009B0002A4ECC9F0AACC6F6BD8EBE8F9A504F1DF4
-:1009C00030125ED43CB8C47D1C379F137A3E1F970B
-:1009D0002CD37CD68E349F4BA1F378FACA609C9EB0
-:1009E00047A3F70C85056D65317ADF6509B4E3B877
-:1009F00051BA5FCFED9161F396AD441F37DE2CF312
-:100A0000FC700B9757188FC884F1E78BF16FECE6F9
-:100A10007474A3CD4074377FA091F28558358F2B25
-:100A200078E17FDC0EF4117CEBC4770B5DA57A24B2
-:100A3000D985B5DAF8439D558D6FF8F5B81F6F5C11
-:100A4000A83F162FEFEBD8C62F30AFAD0EE314EA58
-:100A50007730EEE359D1F37FE3314E7158D8E9672F
-:100A600081BE91FEDF485BB9FD0EA0DBF18F97944C
-:100A7000A13F6776FAAAA73641F9996D13A9FC46FA
-:100A8000FAAD77BD8BF53B8BA85C8D97B8A0BDD137
-:100A9000C8BF2FAEB8795E3E8C7BD82CFAC57D8559
-:100AA000765F52A0773EB4734F2928C37CC36AC1D6
-:100AB0001FCEDEC1F3DDAFBDCCC65338577AC86F49
-:100AC000549D24EABFCBFB7DBBF45FCA30EFB4BAC0
-:100AD00080DFE3F276D94F2762F9B0F4C5A291E244
-:100AE000DF938AA5F004804FB593B7AF2DFB511665
-:100AF000DAF1D555BC3CC95BD93D16EB75E7168DCF
-:100B000074EEF317623F45CF35897DFAB2EF633A51
-:100B1000C7E437495E5CA27FFAC7FC5E22AB64473C
-:100B2000FFA3DF97AFA09F74968FE7255699DA331E
-:100B3000D1FEBD2E6028C7FC52BBA9F430EA1929AA
-:100B4000D32BA7217E6799981EE512D0F9FF213A91
-:100B5000BFFC8BDC64242EAB96CE553A9AAFD2778D
-:100B6000B5968E617FFE7356DA37F3D7D1E818C693
-:100B7000FF77E41375DFD2CA95687F09FB2DB1FFBB
-:100B8000D1F800FEC5F3B9D83CFA685F6563D6D7E3
-:100B900058DC773DEABE1BC27518748374AE234FD0
-:100BA000F24EA4038DA3C87F757E39C0DB58D9F0FF
-:100BB00079E19FA2EA65FCCF85766EB6A887EF7CC7
-:100BC000CC199B178CCFC6A0DC5FCFE7B3436AE19B
-:100BD0007C43E8C5AA7DDCA4AEB75FBBDE8A247E79
-:100BE0009ED98DFE0BFCCE553AF1EBE6DD2CE4E60A
-:100BF0004293FF4123ACE106C752A2879B58F045C0
-:100C0000D44F8C2901E79834B4BB820722F9E4CF92
-:100C1000A5BC00C077EA9838FD449D57223C9A460F
-:100C2000E18789F34E84430C3F83A45FA9E7A3A225
-:100C3000EB4A588F2AFF5D06AD1FC829FC364EE1EE
-:100C4000A7410A413958CB92286F61965722395EE5
-:100C5000CB4CC43F6B6BB8DC745AB99C57E5EB685E
-:100C6000747DF5559CCFD4363071EE8ACF3F91AE6E
-:100C70003258E47BF8AC3579B62EC3FD8AFA80276A
-:100C8000B6DF6BADDCAF3B778CF01BB2C834B46F12
-:100C9000A3E5617EC4C834E41B89F745D55EE07ED8
-:100CA00044A7B897B5D6FBF134B4D79D359169C840
-:100CB0007F1E74F8E621DED4FBDC12F9CE8D63745E
-:100CC000AA1FF192E82D110F6ADC2835C55F87E372
-:100CD0009C96062BB0F29134E1D767817CA44787BC
-:100CE0003DBF12FD01C0DF2E5E44A30AAB005ED300
-:100CF0009D8100D2DB4DCC3F1BCFE2396B027AEEF7
-:100D0000E766B4FEB562FDB385DC3BB75D263F7D8B
-:100D1000B5AFF83174A5371FD1B310ED3B1FC9B182
-:100D20003562FEE718C7D3392B977F2BDFFAA70A66
-:100D3000A05C367E8B2E768F01FC9B104AD2DC6342
-:100D40003069AF53539EDC97A5697F597F81A6BE5A
-:100D5000343C51533FF54899A63C6D7086A6FDE59D
-:100D6000EF5769CA5744E669DA7FEBD4024DF9CAF6
-:100D7000A15B34ED8F0BFB94057D83C5E978CFB77C
-:100D8000A0CB0B4B34DFFD3679CE11A4CB651B799C
-:100D90009E70254046739F430F97EF2DF03F8E576F
-:100DA000BF82F05A017A2FE607AFDCA295FFF50368
-:100DB0009BD6234F4BCC5F58CD5AAAF06AB8C4FCDF
-:100DC000856AFB621DD2E1E363449EC2E5EC727169
-:100DD000FFCAD7E2B58815FE97F06A746BF16AF620
-:100DE00068F16A29D6E2D5E6D5E23565BA16AF0EC6
-:100DF0009F16AFA9355ABCA6F9B578CDA8D3E23570
-:100E000033A0C5EB987A2D5E735AB478CD6BD5E2DA
-:100E10002F3FB85A8BAF047CABFC6F6CD75A4DBBDD
-:100E200028DEFDF5947732AEE71E4DBF2ADE83F053
-:100E30003F8EF716CA0BFF6BF10EDC86FCA089789B
-:100E4000FF2001DF20373E44BE00F2FEDFF05937BD
-:100E50005EE8D5FE91E5BDCA7FE2E56BBCFD381AC0
-:100E60005F1A264F843D39AA3C49B0273FC0EC1891
-:100E7000D2533692BFE566419F5FE2AB2BD09FF91C
-:100E80006392931FC044A6C3BC3EC079C3381F24DD
-:100E90004D227BFF5616D6D3FDBB98F1079DDE8E03
-:100EA00009C032DE9BE3A1E7522147970B7F80CF39
-:100EB00012B83886FB01F2D271DCEC417E0FF2DB16
-:100EC000A997741FC031F4872B8C9D407F383CCF8D
-:100ED00098393D9C54F9838F795C71705B324B2A51
-:100EE00026BD514EA2BC9C253749244796FC9E3F07
-:100EF000D3B3B9FE99F8EC6855E1C6ED9299D91EC5
-:100F0000E2EBD9AC4FC83B16B08EA57EB8FFFA49CC
-:100F10007E0FE8F31253A63BE93812E131C3C4E770
-:100F2000F5BC9E99107ECFB28007E1F243055813BD
-:100F3000CF879F88F4B0E4F7EF16A03F49EEB05F8B
-:100F400087F73C4FC0F1601EB36F6B91D0BF9AE141
-:100F50006E91D07F33ECFDFE7B243CC7172D33DE32
-:100F60000EFF100EAA9FAC58C7E3C54377703DFF34
-:100F7000A9EF32F2FF74B4062B83182792C120C365
-:100F80007C123D3FF73B339BFBBF32D920DD2FCA9C
-:100F9000DE14FA99B897BD44E4979F11F19615BBFA
-:100FA0004C0CF3154AF61D74627C6505E07210E581
-:100FB0009912A07B2C4AB6BEE1E4F77DEB1D785E6A
-:100FC0004C95A3A3E35B6127E3F2B4018F23DE1703
-:100FD000795B0E97E31D6D3533313EA2CEE7FE36C9
-:100FE000DF4CA40F59F1529E17DE6FE388FBDEE061
-:100FF00082FAB8FDAB586B3465BDD54F9746AC6FE0
-:101000006B213AD38B7B781EC85E6B8FBFBFFFD638
-:101010006CA1479882CC9ECE840A8B4FE524F28740
-:101020003F326E0F1ADDD04F3C5FBB2B97C5FB776D
-:10103000BBDAFC34DFF55220809D180B59D89C8C0C
-:10104000F90378C611DE6FBDE608E6B3186C6BBD18
-:1010500061CFE87033BA95F3F17CA9215BCB97FEA1
-:10106000A1ED14C1A9A3AD8EC63B83BA1CFA773299
-:10107000B97FA7A36D31BDD7D578889E5EDF3AFED4
-:10108000A007EA8FC23FBC8FC6E8E2F362E5B9244D
-:101090009F16093A40DF510ED0CFD1563DD1D99D90
-:1010A00039D6106EC23BDF197710EFD334008CE4D1
-:1010B000BF62DED171049C0C822F013DF971BF1912
-:1010C000B214F2C33AED0B084FFFD5FE54F81ACC18
-:1010D0008CEE7B31E458C97F72A9F3DC922DEC7C55
-:1010E00055CE97E7121FBD53C0E5F5AD3CFFE7E8CD
-:1010F0005D8CF4EE3BEFE67EB03BC18EC77DC95AF6
-:10110000E1AF2246372ABF4EC31B37E0654F1B3085
-:101110009A22C61E6A33E1092766417FD5D8181E78
-:101120007B7C8A03DDE29BAA5DF3F1F9D0F4133DE9
-:10113000C8561E9EF9D5203ED1D78CE3DB5B5808FC
-:10114000F54C8A89C2F88E7A28C3F8C9A23E39C004
-:10115000CB29A23EA58E97737C2F48D538B18478D1
-:10116000448ED539B710F9DE32C6CFB78AF3ED3BDE
-:1011700004DF1D6375CEAFC6FADB18E5BDABF58F96
-:101180008BFA4CEBB1AEB1C897176ABFDF2AE0907B
-:10119000613DD6338BE216DA7A35CE90663D7784A0
-:1011A000BE2FD1D63F2ABEB759CF0DCEC2FA42EDDF
-:1011B000F80F8A7A8B95F343E6E7F794AAF53F1484
-:1011C000F5662B3FE7053C5953DF2DC6EF9042846F
-:1011D0001FBA8B15F74F1AF75BEE6C6357E2FEE907
-:1011E000691BA27DF450DB05C2D339CCF39916DB21
-:1011F00057F65636E2B9EB73829F247B223EDF0816
-:10120000FC4EAD77DAF9B972D96D203A325A05BF82
-:1012100010FB30CA2FA4162F272EEE4FFE267A86FB
-:101220000D761EF58B5CF8437ACEBE4BC702717CFF
-:101230002BAB218905E2DABB973935E5F4DBB23413
-:10124000ED5D0B0B34F5D6F2899A7AE6CBA1FDB2AF
-:1012500056D055524999A65E3DEFCE7A7234FAB314
-:10126000BE7086A6DDB9620FFD8EC7C9B9EAEF7DF3
-:10127000784DC817D6DA0A3250EE3CDB361D956C35
-:10128000F63CEC273CA2F49C83E7F93E87F151A899
-:10129000FFC7361FBDDF03F5A0B9B02761BF79A036
-:1012A000FDAE363B959F6873D373479B879E8FB780
-:1012B0001553FDD6362F951F83FEF1F928F483EFE1
-:1012C0001F69ABA1F2A6363F951F6EABA3F2836DEB
-:1012D000017AFEB0AD9EDE77B7B550F981B6567A89
-:1012E000DEDF16A467475B17D5170BF9F69C382F7E
-:1012F000F85C253FFF9B88C7C939C28F26E2F8B644
-:10130000581C7F720EC6F1FB229A7BD671DDD49FEA
-:1013100099AF3FB1BF2AD1DF4436D86EE1FB98E2E6
-:101320007FE3FABDF75980DEC7B4703CE4F70F5194
-:101330007D663DC74595982F73055976053FEE8923
-:10134000EDCE488355161E0F257F0073C33A2BC47C
-:101350003D344476211DCE4B99CEE5A68AD7E8BA16
-:101360001D7C9EB8FE91E6FB6D315FB9BC8FDF330B
-:1013700051D31346B24FF2B5D03D13A63A7F187F32
-:1013800047C2E50FD0B9F78917E68071037CE6C242
-:1013900055CC03CFEC06ADDD93B5AC4C635FC817FD
-:1013A0001E629EA9D06F89D63E492A5CABF9CE94C5
-:1013B0007D8FA6DEE0BA4F53BF644DFE7A37C2730D
-:1013C0000CA3388971633BC3D0DEF2DE4D34AF7BB2
-:1013D000C53ACE481E3A371BDCA7C6C9B97EFE8C7B
-:1013E000902BCCB491F6C378072F16A50475281757
-:1013F0003EFFA714E2474F3FA10BA11F74020BE968
-:1014000070FF4F02750FEB27E34DB5325D5D226330
-:10141000B99479642C4F6543649F807E7E27D20BFC
-:10142000E8E74F98314E97137886E70F85496E1697
-:10143000097C16A9F6C81625D13F7A770EF93FB474
-:10144000E7863A859EDEEEA8C8C0F8E49951F2BB63
-:101450006CEE1933F0F7AC6C99D3E9A9BE7FD0A339
-:101460001BF13CECC61CD58FC4E97E0210B9A0FB71
-:101470008D388FD3E5BF4A4773AFA97088E8FF8CDA
-:10148000E4732F46B8BE25733A1CC8A4752902AE72
-:10149000CABE4AF762809FF2CE586F90C5C679BA2D
-:1014A000CD37435162E522919FB8B76DFE8CEAB803
-:1014B000F7FD027FC56CB006E5537189CE1BA29E75
-:1014C000DD1AFE652EECF1E1796EA58C7991BD4DAA
-:1014D000603DF7A1AC56FE2253BE8972E80AE601D0
-:1014E000BBC06A0D33CCCFE98FEE6FA6F99DA3AFD9
-:1014F000ECD529742F5F5694EFA14CC4DF351A4404
-:10150000FAF9AA57CFD775485B5F6CE579342B8A17
-:101510000D218F84E1ED1EBA7F4ED9293154FD95FE
-:10152000BFCC2238B0972C447F962D53E8EAEAEBE3
-:10153000944008E9E374D8F3926EACA04568D738BC
-:10154000C9B01BF5B1F108175C506131C175B958CC
-:10155000EFDEB6C504A77704BE3A7312E6C3BC3EFD
-:10156000BC9F7145AFEAFFD0AEF3C1F2AAEBF13EEA
-:10157000BB8E4159E84A5A786ED00F4EC1DF883B86
-:101580001D8179C934CF7710FFF2960AFA9D231096
-:1015900020B4BEC627C0DECF277E5443727B9A8E0E
-:1015A000F24413E9EAD7828F2DCEE1FE3C9BFBAAE1
-:1015B00019F87B6BB1F24CA2CF6775DCCF1AD471EE
-:1015C000FB52CDA300C5C183765D41AEEA67EC64F2
-:1015D000F3505E3B74947F27EF4AA27380B243A11D
-:1015E0007CDF4E6BB57D35F6635728BE31479E399B
-:1015F000887AB3D1A19B8A7AF7E1DDF70C629E87E6
-:101600009CA330F41775DA15AE7764EB282F4A7176
-:10161000549B301E52643D5189F03CB8EBFBE4DF33
-:1016200090BF277235843F492F50D6C95AA8FF6012
-:10163000B622EECDF0D596A60B57BE07ED9F9A4F7A
-:10164000D18F72D87ECE8CFA8AC7BA82FC6969B90A
-:10165000DC2ED463DC0BCA4FAC3BE740BEF5D6AE04
-:10166000F5CE7CD49F430AE920C57FEEC8A2F3DD06
-:10167000BB0C74FE5C856B5E50D1C4CF725AB565ED
-:1016800063421C4D9F70FE2709C7A7FD5EC7C2714C
-:10169000EBD1BBB9BDC65C56B277D27225EEE7116D
-:1016A000656B2EBF7770AF3E98E505F81CDAB52262
-:1016B0000FD775FE9500E5DB8EA6EF7F94E311F85A
-:1016C0000B9A75748F69D88CF9B74FB5B134D4EFD4
-:1016D0004C2185F29FF7087E5668E5F4FFFB5C4ECF
-:1016E000E789CFC21EBEEF94E7924216C49BBDAFFE
-:1016F0002C087432E9F5B9CC03F2AFD0EE23FF61C8
-:1017000061AB210DE3F8737E62253A39674D223FC4
-:10171000A1D29AE4C5F71DBB2B8AE3CF3585DAEC5D
-:1017200069981FB3BBCD94867C2A340A7F1DEBD009
-:1017300051DEB047C7F3DABE25E6F5AD5C0BBF4717
-:101740003997F3992795E0029CE793804FCC573E59
-:10175000B891EBC36BDB4D348FB56F8D25BD6A340B
-:10176000B83DDDE64EC37BD8776FD465A1FFA8B244
-:10177000BB7003DE47B0D6C6EF6395532692BF9386
-:10178000FD42CF507FEF489EE15D1AC7DFE5949997
-:10179000C54857B21CCC42BF887F67D5F598B708BB
-:1017A000F8DB86E5BADC89D7635EE35E5B300BF37A
-:1017B0001C03B95378392DB80DF31CEB73CB783972
-:1017C000279885BFE7D4925BC1BF1F17DC86E5D69B
-:1017D000DC19BC1E7D4FC03B83B9575D1F84F13AB5
-:1017E0000CDE7A64C83F86F997C0FCFBC4F33E0167
-:1017F00017B5FE057C0F70DE2F9E89F52F89EFFA55
-:1018000047A97F55D40F8CD2FF6BE2BBF028DF1FB6
-:1018100012DF1D1EE5FB37C5774746A9FFB9A87F34
-:101820007B94FE7F29BE1B1CE5FB5F89EF7E3DCAD2
-:10183000F7BF11DFBD3F4AFD87A2FE5F13FA3F2AC3
-:10184000DA47C4FB02DBC60FC3407705C047902FC1
-:1018500015DB363A719FEFEE2A27FAEFA8E0F11D6B
-:1018600095DE0BF07794A0FECB5C7E3FE89782FF7D
-:101870006E17FD031D3E8C74B7F61D99F25D3A7428
-:10188000DE5321E4A31B74A40FAC7D8BDBE76BBBA1
-:101890009550FC3988ED09F35F2FE6D729E6DB9BED
-:1018A000CBF3A98D6E775A6DBC1FC9AE2D637A1428
-:1018B000F25DE0DF943F5BDC5DD5550CE5314E1DFC
-:1018C00069204AA3298CF72228362117ECE53DC56B
-:1018D000383FAB42E7C1158712DE8BDFBBCB49BF78
-:1018E00053E7D76955E85E2CD9C6E5C09C9FCCB4B8
-:1018F000A39ED5C902833EFCDEAD90FE7EB0ABCC8C
-:101900008E7CCF605B66C7FDBBD6C3F77F75537116
-:1019100012F26BF9411DF1EFC376BEDF77BA75E4C1
-:10192000B700B942E74A805F7B51468C67E1763A5F
-:10193000A7F0D04B8BB95F8FD94A2BE8DC861A0F02
-:10194000969438FDFF04C207CF4B0839A2A07C81D2
-:10195000E793E5E2BC4190FB9FF214E61E13776E1D
-:10196000F244AECCCF63280823E84BAEA5FB8172CE
-:10197000D7291AFF7BF65DDAB221416E280972651C
-:101980006C17F0C938B9931FB46BCAEFE50ABF9959
-:101990009779517F9DF3938DC40FCFA17C9346E738
-:1019A0007B51FE2BF8F193E2BE9B2783FCBCEEC17A
-:1019B0008D653F477CAFEDD6D1FDCE97CA47B7E7DF
-:1019C0003282C3B800C81DD467149685F6D237C1D9
-:1019D000619CDEEFA4FB0BBE011EE31E2D7722BF30
-:1019E0001D175048EE0C931BDF00AFE725EFFB01FE
-:1019F000C4A32389EBD576BEEECE7417BFF7479C00
-:101A0000039485BE76BFF0832B29733CF8531C9D4D
-:101A10008E162AAF97BC19D742FB07A4801DCB476F
-:101A20009C495CEEE424111DEE455D86EE2FCCF45E
-:101A3000A37FA42F6450EF030CE3FFEDC33C19F523
-:101A4000BE4137E967A2FCE0F5D5D85EB14F4295BB
-:101A5000B328AFE761FD95D0DEC0A2EDF15CD3B352
-:101A60008775A2BFCD0FA3BEBA2F8969EE5BDC8755
-:101A70007E742A6F7D18EF4F84F1AE95C1069BFEF0
-:101A8000C4130F5BAF88CD676AE8A987DB295F9530
-:101A9000DB250EC6EFC33EED8924E37601FBC4933C
-:101AA0008776F9AE13E99ADF3F13ED5344FBA68125
-:101AB000A1A6E73CD4BE88DAF70F2597D0FE1AAA74
-:101AC000886F9F2CECFDB8F6255FD7BE589DCF736D
-:101AD000BFBAB184B72FC3F6673C9174CA3D499829
-:101AE0004FEAF0FEA77F5DFF1345FBD3E15F51FB9B
-:101AF000332C923E399FBEBB3A0FE8F8ECDBBFAA0D
-:101B000010EB4E473D19B8A20FDF277B98B877AD91
-:101B100085F4E73E538F1DF535B3BEC78F7CB710F4
-:101B2000EF4F9A1E7BCECA2BE47A55C2FB3E134B75
-:101B3000AD457A6CD591FDD2671A2C2B417DFA65A3
-:101B40002B6B87317479EBBCC807FB236BBD25D0A9
-:101B50006E67F64CB22BF6195AFAE89CED622B9D93
-:101B600003DD69EFB1E3FE313B7AEC184790EFE615
-:101B7000FA93B2C41A780AE929BCB67879DCFE9DDA
-:101B8000EAE1BF23D3FD867523DA01DD7A6FCF78D2
-:101B9000D4B36D0AE5812B4B06E6D1B9BD1FEB1816
-:101BA000F177585715943B1B75742F7C9B67C9328E
-:101BB000842B53FCFE2AF82E374D91F01CC4FD8A6D
-:101BC000DF84F10BA3D0DB767AF9EFAEAAE36EC81F
-:101BD000E3F269431EBF1FAA7BF173C56FC2773B57
-:101BE0005BD7F6E178E6092686F95E3BB34F76E3EC
-:101BF000B9CDC7DD60F1021CAC0D3AFA5D94C76B3C
-:101C0000A14D0AFA330C1A7FC5F3521FB50F36EAFD
-:101C1000C84EB0961834FE8DD4069D0FFD8E3B3C09
-:101C2000817B71DE53DF51AEC5F1DCE3143BCAA703
-:101C300007DDBF36E9609EC9E5DA7EED33B5FD38D4
-:101C4000ABB5F5AE5A6D7DFA426DBDFB364382BF32
-:101C5000465BBE888208E1083CC00A72288957B1F9
-:101C600024EB79FA5DAEEEC0F69EF1B01EA32558C6
-:101C7000FA26CC37696212D9FB0FBC91849B0FF80E
-:101C80000F23BEF3C06446F9A78772BEEF46799A68
-:101C9000089F9DD9065AAFB510E0998FF6FA29FA38
-:101CA000FD2C2B8B6B978FF0F16DCF9BC6CBEE0A83
-:101CB000F4CF31E283CFABFEE31BF8B9A69DADDCD8
-:101CC0002FFD601DCFCFA31554E0FEE6ED93F1F795
-:101CD000BCA6A0DFBEEB0ECC3B4C846B06E6E3C893
-:101CE00031FA58AF9E23C1538C159C2DE3BE3BEEB9
-:101CF000E174F2933C2EFFF7897B0FA2ED711FA6D2
-:101D0000336ECA427FAFE6A9FE079E97BF598DC7C3
-:101D100088325E1788E57D879DD7E27EDABCD05990
-:101D200086FBE901A197A5641B7C1360BE8F1C3163
-:101D300004A5CBA0ACB0C37A90E7FB9C7C5CC35BF2
-:101D400049413CD7F488BB9CCE497D24E6F542A5A9
-:101D5000F7BD5ADA8F0AE5393DE2F29ACBB8BE8177
-:101D6000774A33FA4954502D0ED696919DFA88CF72
-:101D70006BC6FDFA48B6D78C79C2E64CC58EFBD847
-:101D8000E956E8BEAA474C013BEA2D4E1080F83BCD
-:101D90006D869C9EB9743E0860A8ABE0210126F2D6
-:101DA000E9309F2D55C06BA77B991DCF91BB0AF7DA
-:101DB000FF1DFAD553B1BF64FE1DC2C921E0743CBA
-:101DC000CFC3F38345FFA9CB5EA0F6F8D75911D74F
-:101DD0009F97D397612E0BD1EF8D89F1D57EA2FD10
-:101DE000331FF9EDD7FF9CC3AD3D87DFD36358C3E5
-:101DF000C80E7BA132B0F720C2273389ECEC2C77D8
-:101E00005615D247D6916D0BF03CC0FA9F73F96915
-:101E100058CEE34D590A335D85EB4E0BD8118E89B0
-:101E2000FB30F370CF7C2436152F89FB3253615D74
-:101E3000B273F8FECC74BBAA8AA68CB04F13F641DD
-:101E4000E691A1EF61FF89FB7587E56829C2E5FF8F
-:101E5000029F8BFAF4008000000000001F8B080036
-:101E600000000000000BD57D0B7C94C5D5F73C7BB2
-:101E7000CB26D9249B04424248D8CD8D402E6CC23B
-:101E8000C588A84B48102DE2227235E2131220407B
-:101E90000201F46B6CA9590C372DD6F0360A5AD4CE
-:101EA0008D058A8A362820566C978B8AD56A5AF512
-:101EB0002D554B13A18A728BA17D3FDAFAB6DFFC58
-:101EC000CFCC24FB2C89D27E6F7FBFEF4B7F7598E0
-:101ED000E79967E6CC3967CE9CDBCC3266632E3B54
-:101EE000A3BF7F98F1DFAFAFAFD53AEE1F369A317F
-:101EF0007F8AC5B3C3C5585AE87B37FEFBF708D4C1
-:101F0000356672FD2393B151AE78C606E279BDCB3A
-:101F100057C0D81E9B73A26300635D2B98E729FE10
-:101F20007DE94B9BE6BEC5EBFF95E67046F056A9F2
-:101F3000C79ADBF3F97376401F86F6DB2CFA93D150
-:101F4000FCFDB6E383985F632C229AD5B7393854E9
-:101F500026A6A3FC07FEAEC738561A6794CBC4D892
-:101F600018C678170153F2BF5EB60D1992E7F4F068
-:101F7000FE0229ED76DE6F9BC59967E1F59CA1CD48
-:101F80000F59AFC53C388CE368DA5E56C2D8B34708
-:101F9000F9B883517DE4A1320B7F1FD5F3DE8FF7B3
-:101FA0007B4C26597FF4A1B2218C0D39DAB6C6E1FB
-:101FB000E4F31FDAFA909DE32DF257E2FD045EF799
-:101FC00067012FB5433BF8FC0EA72FA1F937FD2E73
-:101FD0008245F0760566CF56D4D947916C07AFEFAE
-:101FE000DA377EB68BB76B8A19EBD2F3192B73698C
-:101FF00034FF525986CFCB6CF3E81EC7E5CFC74BF1
-:10200000BC31E639DECAE95BF0631B7B80BFCC05DF
-:10201000DCA0576B64E029D0B7790B63498C553B42
-:1020200005CDABF73F907E88972FC74CBBCDC5F150
-:10203000541D53960478522F31A62772BA35DA9977
-:10204000CE71953AE0058D71F8860C383A8139C029
-:1020500037ED6B9C28EBA398AEF807F4BF6461FAE8
-:1020600028F4E7A5FEF0674F02178ABFB5093A5B6F
-:10207000C3E1F1735CEF00773AA33AB542FE8FE417
-:10208000326F47AEEC27037CCA66B7F1F12A8107AD
-:10209000DE8F8DD3C45ACC4B872518D147FB8512D0
-:1020A0005F66BB23681EC94BE7EBC7A95F87E56C7A
-:1020B00087BDB79D3D60217CB05A16C8D6084FFE3B
-:1020C00008D4E312A8CEBC5ED78024F03F23E4A658
-:1020D0005AD8D1083E2E712F5F3F292C48E5E31CCA
-:1020E0003D8E4C344A8BFF349AE111031F3FC5D813
-:1020F000E450BE56E5C57413CD23ABC134F014C70C
-:102100004FDE914882C3B2910522F96059A007A71A
-:102110005BD62616B0B8D1CE36F05422BE73D17736
-:102120002EE634311AAF6D04D6D5D6D71D9B581C78
-:10213000D1F74E1F1F6F6B14AB01BED4788CAD214D
-:102140007C6C768971B7353A898EEAFD90DAC36185
-:10215000744C30D051B54BBD3498E8D9DB6F80FA60
-:102160004D6DD84BFC907A295DF289EB1BFACFE8D4
-:10217000A7FF64FABEFFFE87D0F88F07DF8F9FCAE4
-:1021800051F1A3AEBDF13E5E465A9B7D9E3EF09C52
-:102190007A57883CE3FF1F7980D7737BEB0A2F9136
-:1021A00056EF80691CFF91779B3CADBCBFAB8E1B8B
-:1021B000DB4D767F108FF5D8DB3E38603ADAD78971
-:1021C000F6D79C36B6F74DD817D65EC077FD256397
-:1021D000BB70FA84C3CBE11A382304AE89F608C376
-:1021E000F7B32B2F836BE0AC10B86E4836B6D7D759
-:1021F000F40DD7B77223BE162ED5EE96922B6B1721
-:102200003E8FE99323FAC1BB683F6BF695F57B7B64
-:10221000CDD7B7BBB3217C1CBFDCAFF8DAE2EB381B
-:1022200011FFE04B20B1C1E48D8C65CCC9BA18D642
-:10223000D1C9A12E6A97C09CB49EF9C2D7B0AEDEB8
-:10224000C33F53F856E0F69D738D01FEBD150FF3A5
-:10225000A66572BF6253788F57A3735FC1AD0597B0
-:10226000F31F63F7115CAF68BACE689FB57B76F059
-:10227000F59D97CAEC2909FC757220E3D618C6BEF5
-:10228000EA91D75CD470384748DC3D37B86D653C7F
-:10229000ADF34002E0F967C7B5BBBD66F798DEF65F
-:1022A000E1ED7ADB0B3CD96C6D2B0067579DC38346
-:1022B000FDE17DBCE2DFFD786644D0CCF175C1EA7A
-:1022C000D8A87139733C7ADEEB03391EDE8BD5E377
-:1022D000D1FFEC5937AE475D3B9CE85AC9E1BB5092
-:1022E000D9311678F546EB03DDBCDF5ABB3E3489A5
-:1022F0004FF15C9A3E2C0EF8F525125EF93F0A7CF0
-:102300007DC22FE029D304FE13E3F474F453666A0C
-:102310007FC2876796F6B1F88E3907127CE76C5C4E
-:10232000DEF5B1FE151E4A653F87AC9EAFBAF8FCDC
-:102330000E6D8EF3347178AB1367CD5BCE5F2D30AD
-:10234000F992826603DCF904B7A372680AE0B64A20
-:10235000B8ED0325DEBD595F077713C6C3BEF63D52
-:102360002DB0C32D6889FA4BFEF8C003BC1E61BABC
-:10237000F83EE4475781C9C3F708B68DEB1776BE20
-:10238000AFBC2BF1FD38577FEC09F47C239E274727
-:1023900089EF931F31059AF8F7BED297894E3F5EB9
-:1023A000E6F098F95895CC6503DF5631AF0DF0FF94
-:1023B00071C2DF5EEDE0F3BBC9AD97833E77269A2D
-:1023C000D2DF2738F4BC699CDFD87881FF6FE20741
-:1023D000C63699D858C66E95FAC10289C7E9CC6B42
-:1023E000C53833986EC5B8BF396FF332CE1FBFE121
-:1023F000B8621CDE59CC4FCFE7B00095B7B320B51B
-:10240000BF837550FDD7D185690D1CBE695B86659C
-:10241000633D86E0FD76C92F770E10FCF2D920E0EF
-:10242000BD65E015F1EF344DE06FB05BAF76D37A68
-:10243000750DF00026E7C421BE9890F5533650F094
-:102440009FC599FD75EBA7BD3BB6908D2479E048FB
-:10245000E178B84192F206EFD229982F2408D6EB02
-:102460002D72BD969B1D6C00A74BBBCB1C88E0B0AA
-:102470004C9EB02219F37D630DFBD5284EBF372645
-:10248000985913B5F4D27753657F53874CFA1CFAE9
-:10249000C9DB2C386034FFAEFC927E348EE367AA31
-:1024A00079F75AAE71B3C943AC9F7484C8B51B07A2
-:1024B000ECB130AEBFDC94657C3E259FD743E4EEA3
-:1024C0005466E97DCFE97F08F881DC61CD66F0EFE5
-:1024D0004677CC804FF37875041B21EC034E8D902A
-:1024E000F974DBFF6EBBC0BF7BC5AD3F04BAAC8CDB
-:1024F0003F3F8FF40E8B98CFB277CCA4577ED2C8D3
-:10250000C079EC14D70FBD398C7DCAF50BD44F3789
-:102510002653F905D707509E6DCCA5F7E71B3D5410
-:10252000FFC4EDDB8A7EE76FFCD2827D6943A4C2E3
-:10253000B7806395E4BB0D6963B7FC95E375C3DBB6
-:102540007C6170786ADA9A2771358BAD4AFBE43E7C
-:10255000E8CFAB9ED63C68B7F4A0D7E6E0F02C38C5
-:10256000AAAF079917BDDD311562A20EFA2BD71B52
-:10257000EEB7FA7662BC311F9C4AD27903EFC1CE26
-:10258000D71379FBCF1A4B08AECF1BBD04D799C622
-:10259000C954FECDEDDB8DF65EF6A50DED6FDEDDEB
-:1025A0006949E5EDCBBD9A17EBF13A2F0B04383CA6
-:1025B0005BAD42BE6FE5F21DEB7342C1AD8FDF052F
-:1025C00071E1D6F7830F6724549527F2E7534B2A1E
-:1025D0002D6837EB2B2ED3DCBD7CF8CDEB50E0A380
-:1025E0004ED2E5DCCF35C2D3B9FD79B75CC3FBFB76
-:1025F000F931333373B8BA2F9908AEEEE35101289D
-:10260000ADAADDCA7D66D22757A6D902C0DFCA7D32
-:102610007983A04F9DE1746339BDE39D79EEDB2E94
-:102620003D448E9E4968FBAF0F21A77E2FE414D74F
-:10263000373F7D0C726CC8600FE87EDECAF57220F1
-:102640009AD547631F5B6693EB8BCB19D4CF44318C
-:10265000D247C73E9F5A8AF582F15CB65E3994F341
-:10266000FC968CEFBA7AC7DBD5B6E0C3C778FD5CC1
-:10267000C0E4B7F27DE61C6B3BFF33C8D1ED0E0F13
-:10268000EC830D1A8707FBE88EC154CFD52C510D72
-:10269000C4CF015AAFB99ACBD2C0E54FED0B8F0E24
-:1026A000063FBDC27150C2DFBFB2399AE4D32B5688
-:1026B000CF8906F4F7B8E8EF273FB8E79303281F60
-:1026C000AC2BBE879717DD09D44FF57F2C1E81EF09
-:1026D000F93ECD52787FCFBEA40523F9FA2C683994
-:1026E000745F0A876FE4B64ED3605E166DD79A505A
-:1026F000E6A5DD74CCCCDFFFC5ED1276EB6EB73905
-:1027000015CB6A70E0C3EB69FF36EEEBF92D5F96EF
-:10271000C2BC54FBFB08ADED8B56D8C3E9C78B7523
-:10272000C25F33C1B1EFE0F4F76E679807D71C00C2
-:1027300077A5CD43FB49C0DF0A3A9FD3733D0F60B5
-:102740004DFBFC8F82BEE7F4240FF697FD267FEC4D
-:1027500038B43F61A179BEB4FDD7B1565E8FDB6B53
-:102760006591FC7D5D51D724B4AF4B73911D9EF6EE
-:10277000C40D93819F657BF7B5523FB5768F867503
-:10278000B6EFE2EBA9B0876E649E6CF0DD5E51FFA0
-:102790007E99D7037EAB69FDB3A8B7FBA8EE33FBE8
-:1027A000DD16B4AF127ACE16B98FB18E429277C4CD
-:1027B000CAAE5E7A7D9FBFC6FBAD6E7F4ABDA37772
-:1027C000FFE3FBD6900CFE3EC526BF774E4FF7FDCC
-:1027D00013FB964DEE43AABF2D36E68FE4FDA4F120
-:1027E000E71AF6559BD86F7770F9027E51FB2D1FC3
-:1027F000371FE3F2EFBD9093A97C732DE2F349DD1F
-:102800001211A03DFD0AC7577AD2F22821CF94FEBB
-:10281000313BB1E9D50E8ED73FC5EA2519BCDD02A3
-:10282000B95F338B2719F33B19EBBD3A83F6BFAE83
-:1028300074CC81EF87D7A2BECCCCF5A7CC10FDC954
-:102840007E65FB61449C7722BEBFD2F6E3A3FA9675
-:10285000BFE3BB4B48FEBE2AE5EFAA3F9B5811AF32
-:10286000AF7A3882E409ED697DE0E555BEDE752E6C
-:102870005F7E01BF012FAFFD538799EC8FA3A6DACE
-:10288000D7F97E4A4367E03F5D4D71A3A9EE0599F4
-:10289000AFFB93A94FFB50959C4E95A093F72BA3AC
-:1028A000BFE1FAAF9C36EADF917045F335F7335F4D
-:1028B00073AC98EF41CC97D36ED597C5242F0F5E9C
-:1028C000E13CD322BC2B015FF83C38DC0DA047383B
-:1028D000DC3DFCDD756570DFAD31BF09EBEC4B5BBA
-:1028E00000EBEC200713EBF6E0E2FC00D6F37E9B56
-:1028F000A8FB636DA47F1E8C617EC88F83D3920278
-:102900007EECE7680FF9309089F791F2FB3949F4D2
-:10291000FDE008CEFFBCCE6E8F92FDD7BF5580F78D
-:102920006B523D1C02AEDF063666907E6B26BFE121
-:102930007129AF5BE283B79BF9F3962F7318C63901
-:10294000CE82A9CBD1AE268AE4504BBC372581E399
-:1029500071FFDFCDB42FB414F1BA83E434F9775AA0
-:10296000A67953E2797DAEA44B4B6B60C723E86F29
-:102970005AAEC7CFC7196C66F5D4CE2DFAF9D02A56
-:10298000BEFB9DA40B5FC7B4CE8F66CCDF03FCEB10
-:1029900053A32DF08B708CA7681CFEC7AAB319C96E
-:1029A0004BE9F79A2D6930B7970FBCF6B1D06BC5DC
-:1029B000DF9C053B22218F67D444925FEA78CD7D6E
-:1029C000312E3EDE0CDD1C8C80FE775BB9C1EF74CE
-:1029D00034C34BE372C342DA09C12AE0F1E75D7602
-:1029E00006B9DC1F3DEBDA26249E0AE1871A9B908C
-:1029F0001FA7A53EF4728CFE0BF0CDF20337269E86
-:102A00000AD1F7AA1794E7407F56E37D13DF34819C
-:102A10004E2369BDFA4DE08FB648A2FFE45BED445A
-:102A2000EF6E87E929F825EF94F2AA0986307FDE58
-:102A3000B42F22701F7FB63C223813F28AD3FFE9ED
-:102A40009DA0EBAB9144FF5A9BE0A7DA9FE5117F75
-:102A5000EDB779DDEBD0FFCF2388EEB5B1AE387A94
-:102A6000FFCB4426F98FF486DAA8604E3CC7E7C650
-:102A700068FD43E08DF31DF9836B6DE2F909C957D9
-:102A800027781F80C35F1F43FCC8645DFF6E22D997
-:102A9000535C1F25FED51FCAA3BA6EF3A62CC0FA3D
-:102AA00058194DF09D90FEB413B5F1C4DF150F2DEC
-:102AB0007D9B717A9EF0EDBC3F87B73B71D0EAC138
-:102AC000BEF471833968E3743DBFFAE4D8ADBCDE6F
-:102AD00071DF47E97A881FADE2BEBA29F8AE62C954
-:102AE000EAA9D82FFBC377456D0497B9BD74B266C8
-:102AF0007AFF04FAB933F5FF8D792ECFEF5808B974
-:102B000077DED6FE04EC830FE3F4BFE2FD85973F4A
-:102B1000DB49F2D0D29503FD7C9985F301F852EEA2
-:102B20009FCB255F063275963986F047FA78747E1A
-:102B3000BB907BABAF4CCE7F7170C77E8D8FB334B3
-:102B4000EAE0322ACD8142F473460BC66A99C01F6F
-:102B5000D7E3787F679DC158D0419776D3D25DC6C1
-:102B600079E10F7E95A5F807FF6E699B99FC2A1CF9
-:102B7000421BE05F0A4FAF219E20E40AEFE7295A8B
-:102B8000878E8FE77D97E37FC9D3C38BA14F2E8DAF
-:102B90003FF0836BA81DFF4EF1B9F9F2BA9ACFE569
-:102BA000F088F99D957C7E96493938DBD66387435A
-:102BB0000F3AFFDC2003DF9C7F7A38D5BFD0BAB450
-:102BC000280ED779298F98A76DEC341810DEB6B18E
-:102BD000D0671F91CF9726B68D85FC51F288D9DB3F
-:102BE0000AC9AECE6D2B843DA9E419F3B5E5D0F347
-:102BF000405B0EBEDF6F127E0AFAC3BC9F4D6D258F
-:102C00003CD8C57A5CF26C1EE1458D134EBFF0F9DD
-:102C10005E9F29FCDC1CDE3B7DBCFDB0AD36C3FBFA
-:102C2000E10163FD06D97E68185D069BBB0E454039
-:102C3000DEFF98D17A0D1F77AAFCEE99677AE860DB
-:102C400096F6227329FABB84BE6D05BE7FD783EF4B
-:102C5000BB52B93C5D8A3966F4CE7F7F919E0AB93A
-:102C60007FDE24FCD4FBE3793D1F7A8EC0A7AA2B1C
-:102C70003C86F3D17DBF5B988A78CA3D9926A954DA
-:102C80007A0681DF9A202FB9BC68B20A7C7CD158C1
-:102C900033EA9405F6687D4AB5A5773E0BB716D999
-:102CA000B15E166D2BB2CF0FB1779A768D3AE6E210
-:102CB0007439BBCB426E83264BE007D0A39B769939
-:102CC000DBFC8CDEDBBDBCFD59C7E177D06EE1B625
-:102CD000F862E8BDEAFB455BEF4EA90EC177DE2E38
-:102CE00023FE0BDA8C75F8A343EB4DD005C7FCF33C
-:102CF000DF15058DF551C78CF5CFDEBF6B26D8F8F3
-:102D0000A512C1EFA7033101C4A96A3E9A740CFB56
-:102D1000DAE9FD2FC5823E4B7F5FFD3AEC96455BBD
-:102D20008D7CC6E9A641AFF7EFD4883F1607C2D71E
-:102D30009D5CEF97ADC735CAAF991BCA27E1F43C3C
-:102D4000C3DA667A393FD536AC1C857848CD14CEC7
-:102D5000B81C9EABDB36DB1037081FAFBF75CF1C2E
-:102D60005E17FC559525E2DDB8865276124EDF4D92
-:102D7000BF9E84F556F97D8DF6FFCA17871D85FC29
-:102D8000EEDC33E7262A674E263C28FFD9A2835A79
-:102D90003086D79D25AE031DFCBB05018DF687F956
-:102DA0006B237AE510FF7FF5A630385A42DE73F8C0
-:102DB000171D38F4178DF75FB3CDF8DD628E2FC87D
-:102DC000FD25DBFF1111FA5CD97DE30EB69A31EFD8
-:102DD000050A7EFF750CF31221482E3AA4BE720A32
-:102DE000152EEFA3137C8732F9FCC7B588EFB8C066
-:102DF000AAC47CEB1C3617E65B6767C1680EC7B1D7
-:102E0000189BD7C99F5FDC1A43FEA985115C2F2C44
-:102E1000A6924516E33B0FEDD39FBE6B267DA50E14
-:102E200063A39F2735B27FEAE06C44FDC7A2BE983A
-:102E300005691EE0176FE8FC02C63A6B167653ADC3
-:102E4000257808F858C23A84DDC3E9E80D89C7D56A
-:102E5000F2791E4F803E64FC7E396BA3F6CB0FFCEB
-:102E60002322F479889F94EC3965579A6DCC0BFD39
-:102E7000D87C6F14EDF75C1047813FD769DE47EDD2
-:102E80006694625EFECD42FF99DB2AF60BAE9FE6AA
-:102E9000003F2D9B877BA0A7CCE57A7624F488C5DC
-:102EA00051D4AE259E917FA5654E8ED0B3FFFE62B4
-:102EB00010E3743DAC917FA4A548F4DBF2E0707A96
-:102EC0000F79A8D13811A4B7B44C53EFD3484FFAB7
-:102ED00010A0A540CF95CF07BAE8F960B33707FA3D
-:102EE0003AFB6124D9FB4AAFFD4982FE0FECFB6A35
-:102EF000BE4A0F663557A6FFED90FB5DD76611FF02
-:102F00003DA5F95E3785E8A5CE2C21E7C7967A77EF
-:102F1000CA761407A8364D7BE07A0E4FF523265764
-:102F200093BB17EFCCEBCDC1FC4F6D8E2C069F8D64
-:102F30002D15FE9E1345426E478F66DE002F5364AB
-:102F4000BF29592643991CC5F98FF773AA5CF887E6
-:102F50006346FBC8CFC6753692DFE1F3C896FD54D1
-:102F6000DB7CBFBCB60F787AF8A04CE819A756688E
-:102F70004F09B8385D797DEC7F44927FEE94DC5741
-:102F800014FE39DF8CA17D5AC549259F6C06FDB121
-:102F90009F2D1676502F9F18F960AE26F0CA1E148A
-:102FA000FA694BBCA82B3EE0F60EFB2BF8A49C1153
-:102FB000DEFBB37BD43C5B5AC57B4EEF6BB3C65C88
-:102FC0006EF7287A334B600CECC6FEE83DBF247EDA
-:102FD000AC66A2B8B51F716BEC758497FB2D81FBB5
-:102FE000381C432C02FF6916C15F5C2AFBA38AA927
-:102FF000BDD7C6EB953F5CC4BCBC7D652A237F1062
-:103000006FCFE2D09E7763867F8497F8AE324EF41E
-:103010005B3988919D407F5C5E65A1CCA07EBDA69A
-:1030200004F17D6C317DEF3789EFBD165E0ECD1456
-:10303000FA7CD7BA88C05390CF1BD272C007534ACC
-:103040008D7CD026F94695A9D92E95E7908CF53D33
-:103050007FED70DA2F9A227D75FB40B7E784FE5F23
-:10306000B9FE8E9BC700BEE7133D00EF8BA97B28FE
-:10307000DE307FED9CBB3F80DDB02B929E9764EBF2
-:103080004BB3A01F6BAE79FBF883F9338ED892F95E
-:10309000F77ADBB4733FE3E554FF9E77A00F4CBD96
-:1030A000CD4CEDA732E11F656BC53837FBBFB424AB
-:1030B000F3FE6E1EAF51CE4067A4337D05F2162499
-:1030C000FDBE0DFE851D16C966BFE0005C6939199D
-:1030D000FCF9CDD030FB885FED93FCDE3441DB069C
-:1030E000BD66E844B1BE547BF4837E5FC9127AD0DA
-:1030F0007DB254758E576A5FBD31A2333316A53544
-:10310000380CFB5D4EE97AF0D5940C36692BF07ED5
-:103110008F19B90A1CDEAE4A5AF731392EF0A9CE02
-:103120005890F22302C389AF3B2774756EE0F5CE49
-:10313000D6611EF2F9483B7A01EC2B17DE0B39A65B
-:10314000E4CB0967470CF1ABB4ABAB246BFCB161CA
-:10315000E22357F1F6550E5B27F683050F4F8F4597
-:103160009E49558B59E4736C32DAD5DCFE0D00DED6
-:10317000703B39DC1E06CF808FAA3769C487439B1A
-:103180003CB61492639A13F3AB7604B320DFAB3DE5
-:10319000911EBC3FDBE84D3C958578C4642AD95725
-:1031A0001CEF63E18F6594C4F162B6FE1CF8A1B216
-:1031B000B992ECC5E87C9DE4D3D92CC17753E04F9C
-:1031C00084BCB174A4601DCE53CF139C390EE2E7CA
-:1031D00048063C745A9D3980AB735DA409FBE694A4
-:1031E000FB045FF37566B7F0EFEFB7B028ACF7EF0D
-:1031F000E27B3E5EC51A8BAF95D787D8992526010D
-:103200007C55447C9D394CBF0FF09CFE1E2BC1FEAB
-:103210005FB56933C1A3F88259DACB12A1DFED7033
-:10322000173FC07AF9287358E951E0AF871F6ED372
-:10323000880F78792893F8E1D637891F4A83592B6C
-:10324000F311C7AA655EC411929907FE806ED64538
-:10325000FA4437D72720CF943C517283F3811779F2
-:103260003D8ABE4A7EEC6CE42071BCEE6AB453F930
-:103270004CA39359B80CD8DD984CF5E71B5D54B6B8
-:1032800035E6D2F3171A3D54DFDB5842F5FD8D5E6B
-:10329000AA1F689C4CE5CF1A7DF49CE385E49092CC
-:1032A0002B4A1E297E5272299C8FE671F45E574C80
-:1032B000DF93DC53F20EF33015F7CA2345DF0CCD54
-:1032C000E74F76438E75CC81BC28379F7DEE25F87D
-:1032D000496A1C9E0817F022E45EB7C34E723EDDB9
-:1032E000C60EC05E6F5AE1EDDC10B2AFDE5EA331F8
-:1032F0004B089FDE511FC92C217C7C6743BCA15E1B
-:10330000D1F0DE6B8378FF5ABCFEDFA0CB897B3F18
-:103310007DFCB7FCF993F77E910D7A7338766CC11A
-:10332000B8ABA37AE048407DAD95F487A151C20EB9
-:10333000C21FE8329F89F5F9E4BD7FA5F5DDD910FC
-:10334000E132F376F31B22085F1F824E1CAF1F4B46
-:103350003A55AE3BF9DC4B58E7AB6D24E7E6AF9549
-:10336000EB7223C76788BEF6490A23BD4CF3328649
-:1033700038CC27DFB305F99ECF3ED1EC010DBA0F53
-:1033800037922AF8737DE31B947FA5351C237D5863
-:10339000475E16FC047EAB211F4B6B90795A1D4390
-:1033A0000C7954D1A3BD36C807F034E8363FF73066
-:1033B000C3BA66CD9A135B40B57C5EBD51237DA335
-:1033C000475FC836131D2BB32C54FE026B9CECC513
-:1033D00066DA9F14BF7279E10D605D3417D91686E5
-:1033E000C8E1F9F27955AE894AF5BC32CB46FDFC0D
-:1033F000028B91F7FB406E866D01C939970D7240C3
-:10340000B59F9F5BBC3E6334FA99308085ACC7A200
-:103410006C0B7D5F89442FEC5F76E1FFAFED671F9A
-:10342000507AC969FCF36A829FECAD25CF3FFB3C23
-:10343000E2634B3E8A203A2D1929FD11F981B1D35F
-:10344000499FF13A343ECF6592FE65CFFE3EB6838A
-:10345000BF5FBE57F82F79D98972D9EA1AF26B2D5E
-:10346000F3F0F59100B96A8C231F7DFEA3D80EB24C
-:103470002BFCA9C82FE4DB422A4B46BCE8E424F825
-:10348000C597B3AEF5C8EB0AFF6EB9F655ACF0EFD1
-:103490008B38B98A5F96BFFAE7248263DFC524C8F8
-:1034A000B5E5AFAE4BD2FB98F7F2B0F8B58A9B2BDF
-:1034B0003FD872B6E94BC4DDC2DB5565C70C00FFCF
-:1034C000B0ABD855E4A7B030CA6358691778E80E96
-:1034D00064C7B13EC6EB19772B17ECDC0EEDB6B81E
-:1034E000E23C1CCE0BFDE4F1EDCA16FBF93919479D
-:1034F000BDB0DB4C7AE185DD31C4FFCB76FFF0F562
-:103500006B787DD9760DC3B23AD64E785AB6D7CC01
-:10351000ECA1F60DFC3689FDC3B9F4D9987AF0D345
-:10352000E236CDBB231F717957DCC01078D6497EB7
-:103530005A1AD13696E820E1FFAED48F54BBC507A6
-:103540007F6803BD78BBF3A4B7FC341ABA36FFEB2F
-:103550007A07709ED9368AE2BA8BDBF62CA37D7F80
-:1035600077B41353FCC26AF4476D96E36DCE167AB6
-:10357000C619E9FF3DF3BC99E40FE0C43AFC4213DD
-:103580007E5EF5DD16F9DD1689B7EB10541CD3DB32
-:103590007E715B676C166FFFD981F7A86C95ED178C
-:1035A0003BDA0BB15F7EB6377A7280CA1F4D7A85DF
-:1035B0008F77AE6DC2002D645D3D9F6DA5FECE6D13
-:1035C000334F06BE5840E519B5D17CCEEC4ED5C878
-:1035D000AE05BE397ECEEC7D31D644EBD66FA0A3CE
-:1035E000C92EFCA96E8B4BEA977627F48CB95CAB9D
-:1035F0008BE3F2AE6EAFC807087FAEDAD37A4B0129
-:10360000BF77D904FFCBF8BD8C2F214F84E2F13175
-:10361000B600F6D779235DB36E873C7BCB2AE831C1
-:10362000C4B50576D5BC7713C95FB1D2EA1A84FA5E
-:103630009FDEB692FF7CDE28B9CE933BC6C03FD951
-:10364000E916FB7AED46BE42F8940773FAFBF9FCE3
-:103650006A0326CAA77C3F3B83E6F7588DC96BA354
-:10366000384730077ECA1336E637434F7E2192F43F
-:10367000BBDA0CE1777F0CFCCECBDA84604E22F40F
-:103680001D49C7DA5BF9FB107AD63E15CC81DE7294
-:10369000D626FC7878EF44592CDA3549BE413FE80C
-:1036A000B7D3ED3C4FFAE5BE18063DDFF4528CF07F
-:1036B00027FC2492E20EAADF53D942BF6F92712EEB
-:1036C000FF0E011FE082DEBCD8D69C03BD528DBB2D
-:1036D00038B699C63B2BC75B1CD52CE207322F0CA2
-:1036E000ED697C2BF3C21EEF7A3A82F4D32F52DAC3
-:1036F000F763FC2F9E1E4E71F04E7760E1017ACF8A
-:10370000F5364E8725CF440401EFE74FC7509CF3B1
-:1037100073ABD0833E8F49223DE858CC23F3D05F72
-:10372000F7F6080DFE94CF35664BC6FB1D03295EE8
-:10373000B5A4B181E2044BF872473C9A97931157B4
-:10374000FE7CC770F2B37CFEA699E28BFCF9463C86
-:10375000D759F3BCEF60DDED8A263FDB17CFFC6D58
-:103760007868FC41954BB61BFD498AFEEABD35479A
-:10377000D80DD61C81C7C81CB1CFD445B73D9241E6
-:10378000F314EB95D381EC2DBE3E92E09F3ED1F633
-:103790007292E6009E83393F02DE7709BBE68BDD3D
-:1037A000568A8B2C7929C64BFE9B0D5799B05F2CFE
-:1037B000310BFD77096737510AFFD092D81CF20F01
-:1037C000717C93FDD8B5C32CC711E37EBE334DF891
-:1037D000DF83B2BEBF20003E9F92C0EEBC95F49B3B
-:1037E0006D85C0EBC5EDD126F0051FC78BB8FD92E6
-:1037F000EF7C57E0336E21E9E30C79D063112F178A
-:10380000F2B26EC33571C88761EF9A1944DF458BF8
-:103810006710E46138BE66E74879B9FF711BE2675B
-:10382000B57CBD203F68A98C9B2E7D46237D6EE92B
-:10383000FA6BB6901C7CC7CAB2391C67DB7E181BBA
-:103840004A8FD21CA157F47EEFA1F64B797BF1FD94
-:103850005BB104CF4EAB07F084D3F18ABF7FC67C47
-:1038600045DFF7F0471BDFD70B2F9FF745D6FEBF8D
-:103870003E821CD91DE9F1D3D3368A3B9FB1B62DC8
-:10388000C4BCCF3C1749F2E54CBC58EF9F7179E8B6
-:10389000B7018E6F3D44FE8DDF4C6710DD8B02C695
-:1038A0007ED5B837E488731B75899E38C433EA38EF
-:1038B0001DD01FA7CB2DF4FDBB56FA3E7C1E393917
-:1038C000426EF7ACCFE7A2895FCE0C16F438F3FC5A
-:1038D00030DA573AE3059F7378D361A79C8917259F
-:1038E0008332C2F96089B443CF4C6823BBFB8CB6EA
-:1038F00087CA4EABF86E49838CDB72BE4B06DF8005
-:103900002711B7B26F6A871E01FFF4D8622A8311AC
-:103910000997FB99C19FD8879E94EB0B6A0DE43AF7
-:10392000C537483F69B3411EEB528FABDD7D79BC93
-:103930008CE2A0BB358AFBDCABFAE1500F50FE7184
-:10394000CE8F4BFD9A17F9464BD7AE580C7E5F5A77
-:10395000BFF976F0BB9AC7520B9B0CFBAA533313EB
-:103960003C9D917CDD000FA1E365F4E2F7FE1CAD08
-:10397000270FDA99447A2629D70FE688FD0AF566DB
-:10398000DE5FED5A6D138DE356F6A4989FC2134780
-:103990008B0D7E326EE78BF7FDCC5FC1193E7F0544
-:1039A0004F6B8ED01B3ADDAE87C683DEBF3293FFEE
-:1039B000F4E257A3E212BE462F83C5D6E32FE6F00A
-:1039C0003FCFF76AC0BF42CAB7A5F047733873B696
-:1039D00019E31FB9DB8DF511BB8DF5FCBDC67AE18E
-:1039E0004163DD73D4587F04E30EECC513EC5CE453
-:1039F000B5C1CE45093BD79523EC5CD461E7A284E1
-:103A00009D8BE7B07351879D8B3AEC5CD461E7A244
-:103A1000849D8BE77F9078AA957E47D081F2AB5E3C
-:103A20008E5471705A2F17E62491FC54F1CC0B8BF5
-:103A3000F3A9DEE3CF9966277F8ECAD3B93D4E7FC7
-:103A40003387E286EDEB5340374B07F97197FF4C14
-:103A5000F8716B8B231DF02F74ACFB6C3DD4A7C2A7
-:103A600038FD1DB4BF60EDDA29F2958224373AD6CD
-:103A7000B8DEBD5ED08FFC1C2AEFA612FB5D42FFB4
-:103A8000740C8FA3B04DC6B849781C253C7E12CE6D
-:103A9000072A6EF2A4B52B05F2FEE4D3F64D80FFA3
-:103AA000A4F48FB1D94ED2BF945EDDA37F3DA83D73
-:103AB000857DFB428EC8FBEB3EC6F5ED3EF65B55C1
-:103AC000565D2A26BDB1A7BE493351DE48722CEDA2
-:103AD00043AB244CE95A57E706C8BB1813EDE3176C
-:103AE0001D26B20B2EBE6F263D6218F4F390F90C22
-:103AF0000F4419F82B6F574258FC6FB0A1FDC80353
-:103B00001961F1BF11C6B8D46D6B0EC1BE9EBE69FE
-:103B100094A15DB5EF9A303C4AB8A55EDAB47A6BF1
-:103B20003AE4CFAA986E827FD5BE48CAABADE6F024
-:103B30007A11974385A3A0C6EE9D0AFCD5B459E33C
-:103B4000B1CF57C9FD873518F7E31A0BF33B137A4A
-:103B5000F9AEC6C9BCF1FCFB7345CD3B4D9C6EE78D
-:103B60004CDB1E19EF425CA935DDC9F9EA2EAD2DFB
-:103B7000E96ADEDFDF2C7ADA304E8F746BF00715DE
-:103B800090977B32D91ADEEEE4A6176349EF967C54
-:103B9000966E754681DEADCD66B20BE0973227F4A6
-:103BA000F2436B73625496A3779EBDF4FF8AE6C717
-:103BB000E9E2C139C56EC7E121ABA0C7B589F9D625
-:103BC0004CD0FCA427CBF9AC94FB0ACB12FDDC252E
-:103BD000EBA7A4BDA0E67776F8A14217E2988D077F
-:103BE000D2CD90E3A6DD3B717EE0DE28BD64D840F7
-:103BF000E44B66FF763C1F77C907225FF78F2D13D2
-:103C000063AF86FEF99CD53385D73734FFD806BB22
-:103C10007889256083DD59F374ABCDCBCB1B76B5AA
-:103C2000D2F385BB2AC9DE5EC4EAC98E3CADF26F11
-:103C3000253E6A4AB56D4E0EF793C384DCA88912FF
-:103C4000791BE5E6F1AF212FFDE22EAD08F3BDCDE6
-:103C5000B7C756C99FDF3A4C9E3B095B1FDD6F4FCC
-:103C60002F1F087F529B887BF6B71E660473693D41
-:103C70004CBFE4A2F2B64B23C88EFD80F90A484E31
-:103C8000E487D9B36F8B3CE4EE83621DD4D8820302
-:103C9000A6639DFCDC4AEBA48ECBAF9262D8C98CA4
-:103CA0008DE3A56FBCD9C0AFCBCBA20DFC3C9B254F
-:103CB00018E2C833716833A47EDB944C43FB59B7D8
-:103CC000E585F17F71EF7B9223E30C792675ABFDDF
-:103CD0002E8DF2594A8DCF79B99AF8EC26C3F77533
-:103CE000ECD6DE76B083B7FF9AF0CC58BB0DF65613
-:103CF0008D49E4D5CCD63BE5F30E7ACE27625887C2
-:103D000043333DBF15FBA295FCF2CA2F3D1BFFCEEE
-:103D1000EC6B5FE48496E3223F14FE05437E2107AB
-:103D200080EC4F26E85027FD3D75B9C2DF53E76FA1
-:103D3000B721FF96E3DF92CA51B2AC59237F1E6FC1
-:103D40006F4F4D10F5D578BED778DE00FD5DC2FB14
-:103D500063E64AAC97F0F7CBF8BCA1672C839F06CB
-:103D60007E26D5BFEC57F1E7A2AD46BFD132F8733E
-:103D700042E8F8C93017F1F3925D7B5E1FCCF13257
-:103D8000DD175F84F553DB36CD5A997F399F29F9CA
-:103D90007EB1C64471EEEEB78F109F75D758889FDD
-:103DA000BF091FCBBCC29F19CE7F0BF97C10975D5A
-:103DB000B857F30434D10E78190CBE0CC34B6A1FEC
-:103DC000F85278EAC15BD8FB45F8C768E40D688112
-:103DD000A0BB2FBC483CAAFEC3F0C44A8C7858A8AC
-:103DE000BBDE85BC5978CCCC025730EF45981FC656
-:103DF000E7F3C3F8B75E127E1215379879C942F51A
-:103E00001E3EF189FCE9DBA618D7650FDFF8C43A3E
-:103E100099712989BEFB9FE69F6FE21B0577787E2B
-:103E2000B23ADF737A983CFF32868DA1F57F8579AF
-:103E3000C36ABF57781E7A6F09E513753B32487F16
-:103E4000E8D96F9CC6F72B6332288F5897FE392527
-:103E50007775D94E8D53C9DFBB46818F8724C1EF5B
-:103E6000BA7E6D667A47885EA2AFB392DF347D4D2D
-:103E700022959591CE24EC17956BCC3EEC839FDC7C
-:103E80003F28A9047EF875D6015378D79FDC333AD2
-:103E90009D15A05E4EE5C9CD11B343FDD9AA8CCFC7
-:103EA00015FB46DDBDC769FF3A677A3B7636D6D942
-:103EB000BA7DB148A959BAEEBDB14EAE7AB45A74C2
-:103EC000672EC5495B773A8137676B21FCD174F661
-:103ED0007260AF9EB0645DF920F8BF6AFF7EE409AE
-:103EE000ECEFFA1A6B12F4CCCFDFE7FB9F46FB171F
-:103EF000E907A7917F3C0071AB683ADF765A635EB1
-:103F0000C46F169B0F153A0DFBE9C19980E3E528B4
-:103F1000DD953B06E3077626637C8F9FF225F5351A
-:103F2000D9717DF94B54B97CABD0DF762A7FADF4E3
-:103F3000EB426F471D7A3B8242D0DB5187DE8E1207
-:103F40007A3B9E97C25F8FB86A535711EC4E7F2918
-:103F5000CBADA7FDD5910BBD7C9516E581BC59A5D0
-:103F60007906C10FC6B6A7887D358CBEAABCB68BB4
-:103F7000EB5621FC7EFD253B0BCD1F9BC0E20DF5D2
-:103F800089F61443FB72A7DBF0FE86E4E186F7377F
-:103F9000BA8A0CF56FE55E6D687FB36782A17E4BD0
-:103FA000C98D86F6D3BCD30CF5E993E718DACFF0C8
-:103FB000551ADECF9ABDD8F07E8EBEC250BFBDE688
-:103FC0001E43FB3BEAD718DE7B99D382FDED20EC44
-:103FD000298EF79FC39EE2E5AA5F653B42E93A7EE0
-:103FE000A2A9BE2F7FFCA25CA1CFDC3FDC3B1FFC63
-:103FF0009126CF81A4C9F31C77E7BA44DE00CEED49
-:10400000933DDB9E02BE096F17FE7E7CF4E18B2E92
-:104010004EC3F6DC5B6EB370F930FEAAC3A33279EF
-:10402000DDFC74D36D162E57C65F73F8C50C5E8F1A
-:104030007EFA55511F79F822DEAF7E7A83A84F674A
-:10404000A45A243E3DEE363F9FC7F8EB33367984C1
-:104050003FA4CF7C4B55020FC85B041E5006397F2E
-:10406000A23CCCF913E551CE9FD5598CBDCEF913A6
-:10407000E5316E57E2F92FB95D89F26D6E57A27C7A
-:1040800087DB9528DBB95D89F2378DB3A97CBF51F9
-:10409000A7EFFEB3B186CAE38DF5F4FCC3C6062ACA
-:1040A0003F6EF4D3F3CDB9CA4F11243F8B8A272D2D
-:1040B000431C0F7EB803D6B3A17156150F54F1BF40
-:1040C000A67AD6118D75DA6189FFD4DE1BD7EB5F36
-:1040D000CE5AD8A721FA566BB4775B2EF92F8638C3
-:1040E00029AE239F976AD3D38A79F9854B7F0AEF4C
-:1040F000671457AD8B73E31C48BD15FCF281A9EF23
-:1041000073C1774B3EA91AEEFD09BE53716C15477A
-:10411000EEC94F0989739B42F262E82F24BF45C55F
-:104120009B553ECD7576919FA7E2C92A6F46F557FC
-:104130007E8991BCBB76A385F493180B0BA27F9567
-:104140001F73ADBDAD08F902D7D63A280F6D107FA9
-:104150006E2BA6765E332FB7FF99B72FEC8D5F0FCE
-:1041600092F0F3F7047FF9259DFCAED7CAF83DBE67
-:10417000B78BF77E7C8FDC29E819BC24BFDAE3C853
-:10418000732AEE8DA7A37DB4681F447F59FFC5C76E
-:104190008BED5D3F69096D45C8A74A5BE6A07CAA27
-:1041A0006D1382747E4B77EBEF019FBE08E7EFA3A0
-:1041B00069FD64A6C14F304DEABD5F4387E358AF48
-:1041C0000A3F0ACF8A2E0ABF21794784D7FEE81416
-:1041D0004E9F70BA287A945FEAC533F074391D7A1D
-:1041E000E9047FECFF2B74186D69A3F37F11B5769A
-:1041F0000FE0FA26BADCD9C526E13C7172867E371B
-:10420000E85379C9F53AEA556CC2246C4DEABDFB16
-:104210001BDE4FFE86F70BFB79FF56A4CA47F03A28
-:104220008A385D264AF9B1AA5CE077B2DB4CF89D8A
-:1042300098BF88F451E6107A9D8BFF0FF264D25735
-:10424000BEB5E86FD200A37EA8E2C137C9FE2687BB
-:10425000C5816F927AE34D617AE1B0E1323EEC665E
-:104260006E61F78973EE65729F4E9574CEE4C6FC5D
-:1042700078D091E91608ADA338E75E8873E07EAA8E
-:10428000DFC802547E8B0569DFBA990B38D46F61A1
-:104290008CF2198F444FAD58CEFB9B386A62169E44
-:1042A000879CEB2B193E86CEF5FDC11972AEEF70DF
-:1042B000998BF486C3F64CD263B00EAC217EB43732
-:1042C000B9DC472AC311BE2FA07C8DEF0B599CC9C6
-:1042D000DFE0FB02EA37E5AE61F86E92CB986FA2A1
-:1042E000BEFF96B3945946F52F77BF55F8F210F8F4
-:1042F00057DE8A1F5606BFF35BF1579561BE6FC547
-:104300000F328932C24665C14B597DE9598A0F7B0C
-:10431000C79BC42C8997E357E1331C8F0ABFFF0268
-:104320003EE7F785CFBBA53EDA6D7F2F363903F127
-:104330002FB1FEEB5E2A1804F83F0768C84BB60B96
-:10434000BC84FB773E6B6443805FB63D8E9EDF2D61
-:1043500079E8DA8671D4FEBA86129ADF3551FAAA64
-:10436000E13877521CCCE19A03FB6C5B139DBF3D97
-:10437000F7BCD903FDBBD6ECDAE4C15A7F4B9C975E
-:10438000635F1D4947BC8D6DEF3B6FB7D6AEF0E65E
-:1043900027F88B32BC778BFD4F9C2356FBEF9008A0
-:1043A00091EFAACEB3F6B71F8F8D12726548849035
-:1043B000838A4EFC3BAAA7F27EC672B991FA5014CA
-:1043C000E9DF2509DE07804F56C60CFAABB2ABBB5E
-:1043D0000798296EBD12F1CB01B06BECE4CFB98E1A
-:1043E000E5DC023DB80CF626C743F99B55744F81B6
-:1043F0003A9711916C32DE6FE38A32DCD7129D9BC3
-:1044000060A8C778061BDAC7956418DEC77B471813
-:10441000DE274E2E36D407FAC619DA0F9A5D6AA83F
-:10442000A7E83719DAA7D6DC6AA82BF9922A1EB1B9
-:10443000B4FAB986EF8736CC37B477FB9718EF9F7D
-:10444000F17BDB73932097C45FE6C69586F73F8ABE
-:1044500015E70E263B16D27D12D9CDDF318E6FFEC9
-:10446000CA0CFCA6C669E2BE0097907F7EFE3FD0D4
-:10447000B53CD9280F273A8DF630D7D734ECBFA9F1
-:10448000F516C3F337864BBBB7901592FCFB27E9B3
-:104490001C8E97EE32E609A23DF4155EBF4E1FF169
-:1044A00010FC0E6503AC9E0013FEEED079C1DF1D3B
-:1044B0008A07F8BB43EBF0771BEF6D32D21DFEEE9F
-:1044C000D0F7A38E19E93EA6DD48F7AB8E1BE9AE07
-:1044D000F8319C3E577718F9219C3ED79C0EE30F8C
-:1044E000498FD9FC7FFF10E798895E931C1A7BCC1B
-:1044F000FDAFD3E76F61F4E9A187C34EFAE275C15E
-:10450000BC38D4CBB1CEA037C8F9DC9057EFC88007
-:104510009CB4E9D611037BF9A72945F04FF7B117F1
-:104520002321F7224618FB3F9FAA47A1FDECC48B2D
-:10453000E936F04397B8AF6FBE949F2A9F90DBBBDC
-:10454000E23CDD77CC14DF3F616AA6FB920E3BF5BF
-:10455000047C7F677EBD86F84132F3ED59C8C79B66
-:10456000F78B088A27CC1B2ACE75B2FC0ECAB3572C
-:10457000726E5EAAC863193C42C6273D229F256D14
-:1045800084D00B633C4ECA7BADCC17E708B859907A
-:104590003EAF00F8783B12F71676B708FF7D8755D7
-:1045A0009C2FF5733E455C0C7A22F4B834A947354C
-:1045B000FDCE6E07FCC3B632C3BE383C6037E45D47
-:1045C000E6ED721AEA056DC986F6230FB80CEF8B7B
-:1045D00082B986F7A38E790CF531ED2586F6571D45
-:1045E000F71AEA57774C36B4BFE6B4CF504F655D43
-:1045F0008F02BF4335618FCE1821F278F81AA57863
-:10460000D2BC0DF1E2FCA0B453951EACF27175C999
-:10461000D7E1FAF4509B4EF9BD4D29CC43E700ECAD
-:10462000D23E61463D5B97F9B44A1F657E633EAD5D
-:10463000CAA3EDD1C7A5FEADF4E1903C5A6F681E48
-:10464000ED3C79CE377CDFAB1C21CFF385C13FD465
-:1046500026E6DB748F8DCE2D28B8C2E1392BF33BD3
-:1046600077D8FB3E3FB27C84B0637F96E95B3482AF
-:10467000974F403C65F6359EA7C3CFF9ABE97B3633
-:10468000CF7DAE6F1E6FDE48319F0A93E9CE69F988
-:1046900094B734FB8590F11B257F57E76B7DCE6F78
-:1046A0005E9CC82B62713617F8B7FFF1043E936D1C
-:1046B0006C2D9D739179E7776C6A7B102EF20A5B03
-:1046C000B355DC5F16B0821FA69472FDA988DBC9C2
-:1046D000DBFFEB870EAEE73CD160213FC4FA67CA2F
-:1046E0006770CDABE71CC1506E5F803FA0ABC02EA2
-:1046F000F94B9EC89BFDC9084665B9F9AB9EFC6F96
-:10470000F2A73326F70761B7F4C16FC4876A1EFFAB
-:10471000EE3CF0703C29BB90C9BCBB2C0997C25F32
-:104720008F1D2FF1A7F2F15D2BACBEA71C94D73FD4
-:1047300019F94C8A7E31F9822F7F27F181769047D3
-:10474000FDB52B37E7C7C15FDBCD5C71CEAFF1475D
-:10475000FEBBF0A2F0DFDFF99EFEE4C36572A19F0D
-:10476000F33EFDF127FDFD13E77E42E483C82F9160
-:10477000F4086499289EBB21C6B88EED79625F78F3
-:104780004EED177E6E4F1AE504837FB9699D59CAB5
-:1047900009B16F63FFC4F305EBACA4CFB006918FF2
-:1047A0005C23653163BEA471A3118FB5D27D56D74A
-:1047B0007919E93BF31DB6402B6F5FE90FDFB7BDF9
-:1047C000F43DC56B5CB8B7C4B31EFEF7AA8DC676C0
-:1047D0008B1CE25EAF056176E92269972E0AB34B26
-:1047E000FF3A42DAA51EE621BD4CC69F159C3D7CD2
-:1047F00015C8A4BC60D8A966E12FA17C2585271720
-:10480000E20B21F768727C46E562DF5E6BE9338F6D
-:10481000AC079FFDC4C9CF224EEEC2FAEFA6F33F0C
-:10482000DD7B23451C4DC52F64FBB3FE8BF41EEDD1
-:10483000D1DBB9A2F642C4917AE21D6171936E8711
-:1048400029B604FDED16F72FA83C80257F0D143AFC
-:1048500043E29C7A87C99077115EEA6BF6515E401D
-:10486000AB45CFCC433EB2C563C77D91F73B0E2726
-:10487000E1BCF614E9AF0987B747AF1AAF8938A191
-:104880005FE8B9DD9335D273B95C6458472A9E3D21
-:104890008D0507A054F1037D6309E159C50F2A83F3
-:1048A0002504E78CA645565CD9D7F1E8EAF22857EB
-:1048B0006F5CA1234DE4A3F4175F987EC943FDDD2F
-:1048C00076691CF5539AE716E7F5D73EB8027C34B3
-:1048D0006217B3629E1D61F9D8AA7C214FC89F77E9
-:1048E000F394DC96792E6B34A1C76B4CE5BD90DC5C
-:1048F00056F58BCDB25E2EEAABD6897A87BCC768F7
-:10490000A7F437609E28311FD8C5BBA53F02F340EE
-:104910008979E039E414EA9053A8434EA10E398511
-:1049200012720ACFE7335F7A9159C441CA42D60D59
-:10493000E22065217A10E220A175C44142DB230EFA
-:1049400012FA1E7190D0F7888384D61107096D8FF3
-:104950003848689D95DCD85B875CF34E33D4A773E9
-:104960007DBF2C64DD220E12DA3FE22086FEF415B4
-:1049700086EF6F670D86EF1107096D7F6783668885
-:1049800093DC29CFA5576D4D20FEB8C9ED6BCCE364
-:10499000F4FD43F4DFEFB6C20E341F5C4CF6595DF4
-:1049A0009447D0B979B2A0BB89093A77CD213AAF03
-:1049B000B6897AB9C88BED2BDE509625E20D281109
-:1049C0006F408978034AC41B701F36E20D28116FAF
-:1049D000C073C41B5022DE8012F106948837A044B5
-:1049E000BC0125E20DF80EF106948837E039E20D9E
-:1049F00028116FC0F313887B64F5C205BD3DCB6001
-:104A00003F723E34D88F4E431D7A7B687BE8EDA120
-:104A1000EFA1B787BE87DE1E5A87DE1EDA1E7A7BBD
-:104A200068FDD00817AD33E8EFA1DF417F0FAD1768
-:104A300034FB5F838FE9E66DE78FA2EC88D19ED0CF
-:104A4000B82808E67D3C0371A48E482D3D9E2F7941
-:104A5000EB9ACE1965BCAECBFCB242D645F73BEB28
-:104A6000F2DE1A3DC8281FB6E02FC9422EC83824EE
-:104A7000FD71BA17ED65640794CAF383EA7B0F737F
-:104A80009A51AAF6BDF5BEDB858FAFDA91BC0C81D9
-:104A9000831B8845C883285AED28461EF74E932667
-:104AA000F220EF1379A8E17CF527B96FEF34ED39E7
-:104AB0001C85BC964A8DEE8BCFB1B063B8C7BBA046
-:104AC000B9BE18FAC2C7793DF7CB8F435E8C825BC3
-:104AD000F901B99CA07355E3BB98AD3A1FF7893132
-:104AE000DB02C8779BD013F01DECC73CBFE67D2AE4
-:104AF00084BF3FCD137ABFEE5F31AE9A3FCFDB5D0F
-:104B00003F0EE7B5A64489EF7EF2642CE171EA5AC4
-:104B1000ED299C8B1BBF9B7971FEF282843B6FB7A2
-:104B2000D3564DE33AE99C578FBDB22D9DCEA55586
-:104B3000B28EB264F2E56B748FB9C21B9FDF51CCA9
-:104B40008F8BF86356D247C5799128795E449D13BF
-:104B5000715B7C7B608FA8F322D78E8E2F47BE16A9
-:104B60003B28EEDDBB7974E5BA81BC7F3D20EEDDEC
-:104B7000BBF64FF5AF517DBBB8778FD8602C8D4316
-:104B8000FBDA30BF46F73D4CF5B79A06B8707E7435
-:104B90008D3509ED77330FD49F614C9C8354F0E53C
-:104BA000B37613EE1DE75BCC91C4103EE29C7A1BFA
-:104BB000E85EE4B1D27D10D32C4E2BE446F83E7E65
-:104BC000793E5D989E10960FD1B4FA78BA3903FEFB
-:104BD00024932708B9B52F9AF405A5EF54CA3CA829
-:104BE0008B6B5FA3FBAC2BF708FD40E77200F24F25
-:104BF000E547D46506D24DD01706B7162698C5FEF0
-:104C00009FCFF178C6FFE2CC1217CE31BE46F9FA3B
-:104C100095EBC6C489F33A22FE502DF1542DF35F73
-:104C200058BE33097AA7BAC7B4DC3C3E8ECEBB353A
-:104C30000B7D4EF9772A7F35EA75D0B9F271791F6D
-:104C4000C8C64A3A07149E87A2F44375DFC9E2B585
-:104C500056CA6F591CA6072E957AE0D2303DF09ABD
-:104C60007CE99F517AA0BA9F4EB6A9FCD59119A4B0
-:104C7000A7D48BFBF82AD608BD85ED11F7D857AC21
-:104C80009968C2BD1515FBBC1EAD0FFE7857EA2F03
-:104C900053306822F27C065339F3523295B32EE535
-:104CA000921CC0590CD0BFE36546FAF47B525F9961
-:104CB000813C3F9C8FF347C87C3E46FA5211739665
-:104CC000436E8CF06A47E0BE9E62D5D7218F704A52
-:104CD0002BA3F3303743AFE12F6643CF19053E775F
-:104CE00097D3B980C91A9DAFB879F40AC9D79CCFB8
-:104CF00019F8DC2FF9D647F59EFD40F2B7EEEFB478
-:104D0000D0BDAC7ECD867BD97469CF2AFE0DE7F38A
-:104D100079F2F7269843F8997AFC50001697ABF889
-:104D2000C7CE84BE380FBEC1C1929076D875E2FD61
-:104D3000DDBBC7CE5C8B1CEBFF4BFF4485FA1D0629
-:104D4000AE67419EDE7157916D7E885C292D2C6D7A
-:104D50002918D84BF7F93DE7C6F20741FF5F797F85
-:104D6000F6A0AF3BBF58C5F18CF5312FAEE36EDC3A
-:104D70008CFB703EF39625E33E66A62E9109225FDA
-:104D80006DAEAC1FDE7DE77F6E74107EA8BE39BFAE
-:104D90007CA69FD68B9057B7435E9921A7F487F2E4
-:104DA000911F64EF98047A44E777C9F3F0F21C6B23
-:104DB000983FE270BEA043B85FA22A5FC8716671D7
-:104DC000A5DF4EE7545DE4D753F07F62359E1B5458
-:104DD000E5CFA47DFDEFCAB7FF7392FE2CE6F788FE
-:104DE000499CDF1E6C6E66D23F247E2743AE1F2691
-:104DF000EF33E8A53F971AA0FFFD9A3394FEFA46D9
-:104E00004D9C9BEEC78FC372BB1EDD013F5EA3F8B6
-:104E10007D8E2773041F3DF91D1BE9DF15B6F6D7FC
-:104E2000704F93C2E3470DFF61A5FBFE58301BF79F
-:104E30004FCDAD8FA4FB5E4B0B7D8720F7A2F33DDA
-:104E4000448F9602C1671D4EDF513CAFDB74E80909
-:104E50009C1F5F7ED04DE71A2B0F14ADC7BD16A562
-:104E600085FA9B986FA5C369C3FEBD6C6D3CED6769
-:104E7000F306C9F385AC8BE2540AFF9DF9621FDD8E
-:104E800052C8E43DA732BF9E0BCA69867632AF385E
-:104E90006C9D28FF60B89F21FC3E81FED68FF227D3
-:104EA000C07F600BF12F2AFF8435F79339D83F2B51
-:104EB0006CC6F370AA4C289076AEB40317F4EC5F7E
-:104EC000F99306415FDEACD1EFD6543B5CB3AEE65E
-:104ED000F5EA6356640AB229092E718FC4FDE21EF9
-:104EE00089F97CBD42DE54C8BCA1EAAD25B4DEAA76
-:104EF00003BC4CEC7F5DDEBEF948DACBE09FA097A7
-:104F0000CE89573BBDB68490755FD5AC19CE99ABB1
-:104F1000BAA9C02CD611AE302F86BC70DB70974B6F
-:104F200005572B9087965020F8437DC7DB511EC351
-:104F3000940CF6BAB8C787C3ED16E31587F43FBFE4
-:104F4000D9785E9EB7277DC8511023CEA73BF9BC08
-:104F5000E1FF703A094E8E07C253D783BC3F178DCD
-:104F600043F4A80A06ACB0B72B903FC1EB739D0188
-:104F70002BC699BF56DC5BA16F12E3E81BE36D05FE
-:104F8000D0972C4E5B1AF027EFB5E7F0911CACE6FA
-:104F900078C1F91F750E301C3F9512DEEAE678A342
-:104FA0001ED6BCD90A7ACCE9E7FCFC7505826FE70E
-:104FB000AF9D40E79FAB2D5ECAAFD7257EFFB822DD
-:104FC000F201C407E6B46CB1BA79BDB040C899EB40
-:104FD0000A047F4DC90866D3FD342B223D80738EB1
-:104FE000B399E6D783DF87393E34DC83E223FC7252
-:104FF000BEF0238FACBAC548CF5E7862C43D462D63
-:1050000095B4DE165A749B33148EAD87B271AE67B9
-:105010000E5FDFB8778739753A6FF3E9C3B3D269AA
-:105020009E1C4EE035C6E39A84FB66389F101F2B0A
-:105030007E51E783D578330BC479C799057DFBD7BB
-:105040007BD7A597F49B264E5FF8BDFB5B97361C7C
-:1050500034E2E3DAAAC53D60E1EB54AD4FB52ED59D
-:105060003A55EBF709AB2F98ACF5CA19BEDFD6BF9E
-:10507000D0079E5A0A841C992BE9CAF17A34F45C51
-:10508000D1F7E47AAEC830AE77F447F7064ABA579C
-:105090009406B3710E50B557E3562488EFC0F7E07D
-:1050A000B7A5723CB45F49ED4D067951D5232F76F3
-:1050B000AF4B82BCD8A391BEBBF2C12369DF861E71
-:1050C000FB9CD063CFD4EE589602BF8125901E7A08
-:1050D0003F537550C887055CFF81BC5828F7E9929B
-:1050E0006CFD3B0521EBB7FA87CFE5E842BE042112
-:1050F0005F3E7EEE950FC6B97AF74F05FFFC8DBF78
-:10510000B6563A42F1A5C9FB28BAE9DC5795C3E681
-:10511000429E6DD5DA4A92B72C99DB135A489E54B9
-:10512000181F54AED5E8DEACAA86B101F3FFA05C2F
-:10513000AEDA348DEEE6517452F76FA8FD54C1FF1C
-:10514000B8847FAEE4E380946B736BDCB685B4EE19
-:10515000DDB62AF0BF7C3FA7DAF8BC874E3D71EC84
-:10516000FCF5C9F21C0BD9259BACC2BFB73B86F43A
-:10517000D5332B5F7A67266FF7C523ADE9D04F147F
-:105180001C8BA41F6F81F4C72D947A2BA7D34F0BD0
-:1051900042F25B163D29E854F5FCAF7E8FFBA12A55
-:1051A00032A43C7B509C2F9FDFB687E83667E366CE
-:1051B000AB9BB7FB4581DB20A7ABEA8B9CF04FCFC5
-:1051C000DDD86A851CF8859437E1FC5E21F3521521
-:1051D0005EB1EF6821F10BD51EF26F0F1FE7AE1520
-:1051E00091B1C87351E39C967C5C551F9F80F1AAD6
-:1051F000EA2B7F00BB47C9FBF075773252AC87F9C9
-:10520000BC3FACCB93133C74CEB642FEBE5478FB8D
-:105210003F48BAFDC82AEE114C8D6E7B9AF2169665
-:105220004779201FB2B23A021817FC0CB86D2671EC
-:10523000EF60566DC7978083ABC5949F8212F71DB0
-:10524000414D4EE2F5A74CE23C50865994D642C1FE
-:105250000F704DE13D1BD041F79F85E4671AF8D5EB
-:10526000C6B66FC4FD2BB6018C7EEF45F1A7EA47A9
-:10527000F1A7E2DFFEE6F7DF5738BF936EE987C894
-:10528000F5A4E31CC5BC8786D1FDFCDF344F9BBC75
-:1052900007AF67BE11E2770B2E9B6F968C8FF73BA3
-:1052A000DF96F2A43EE61B3E4FB54E54EE754F5CC2
-:1052B000A159C4154E6A7CFFE2DF9D5C1149795FFC
-:1052C0006A5ECAEF7DA5F9F2EEC2049937DC1103DC
-:1052D0003DB242FE1E040B8A3A9E4F0B79AEF67D1C
-:1052E000756F9892CFA7EAE5BEC83A1EC47A660DDC
-:1052F00099744FC689E69331B8BFE3E404019FFA7D
-:10530000EE2EAB38F7CA626C2EDC9FC8ED2BFADDAF
-:1053100087056B07911D79474326C9853BFCF1C280
-:10532000EF20F5FB85520E46DF55B9FE2AB4DFEAC1
-:10533000766A7C9C050ECFA75BE9FB3C0FF4C1E8C5
-:105340009669B60CD27B851DA0E2407769CC47E711
-:10535000992027B1BE4C87B2B0EF2CDA2AEC802915
-:1053600026B611F1C2A14DBE492990138F8A7B2325
-:10537000D936E3BD4A2F66FBC617026F61F791DD90
-:10538000656DF30E821CE7FA06FC4C0B1C3ED2DB6B
-:105390005F9172F2444B27DD4FAEF07AD939159BFD
-:1053A0003897DA156322FFDB959E57A996F124C53D
-:1053B000372A1EF518FE7335F064A27DADDC5C4122
-:1053C000F7FAAC6F994865F5E6F247FC05380FEB44
-:1053D0004B1A47705BC93F565D37519C1F7D2A228F
-:1053E0001EF64DBAD59F1EAA9756B76EA0732AA770
-:1053F0005B23E99C4A99735A59FC00BA6F97CE7D9A
-:10540000A976B585623F5F5237D170CE6401EF1344
-:1054100079B07F6E8BA6BC52757EE4DE287D51E1AB
-:1054200040718EE46A97383F9242ED5D7DFAC35534
-:10543000F969A3388F10722E66EA1CFE7D6DDD8B34
-:10544000B1E867E9C3EF8DE59881FF6915FAEF3997
-:1054500017B3559C8BB90BF612F4C804DFCC39C0D6
-:10546000FF9B66C27F7FE3D5E0474942EC883B0261
-:1054700071A4B7EA4166433C597732D28B4F9B59AE
-:1054800003F400A5BFA8E71B245E4EC735A7833FE2
-:1054900016EFDC928EFDE5F31851AFD839EB9790FB
-:1054A00057FAF608A19F5B18E9C3557EA15FB39A2E
-:1054B00004752F66E43CCE479B0BA3C53D3DF2FC33
-:1054C0008C824BDDB7FAB945DC17837331E0F78F77
-:1054D0002CC105A0EF475C7F851D5B2BE5D847CD30
-:1054E00066FADD113F5F28D0433E6A7E3106E773DE
-:1054F00095BE566EFED88BFB6856EE13E75471AF1F
-:1055000039DD5929FD20CBA41F64E5CBD649F8DD50
-:1055100011AE7FD1935A4BD0D617FD9648FDAAA75E
-:10552000BE770FD96DB5BB85FE50DBD649FA83D265
-:1055300047D4B9B8A5BB3B499F50DF2DDB2BF052B8
-:10554000B7573CAF44DEBAFCBD502D0BF6B446F560
-:105550007776CF9DB5C6509F43F577F2A5BFDED2D3
-:1055600045FAE003B9BF213BBC6EADEC97D7AD2146
-:10557000E3ED07138D11CF331DF8DE65D01BEAF67E
-:10558000C6D3F7C1BAA88DD8E7BDCB1C16944D750C
-:105590000EDAF7B7D59B722DA3015C94077ADC4134
-:1055A00099BF3570E97F46C27F90C2BA8EE0DED7E0
-:1055B000C34EFD4DC819F57B96EADCCB85573F1BE2
-:1055C00085FEAF1BDA7111773C58B585B3109FF893
-:1055D00075A19C477EC728F0F5C0C3423E3F6E656B
-:1055E0001BE9FE608B8FC16F1F947145FF5F4CE21A
-:1055F000F725B4E08F43F52BEB48B19FFA22447CAA
-:10560000B1C8AD7F08386ED1AC0545B0A95DE66C78
-:10561000F4AF7E4745E9A9A5523EA749FBCA3638F3
-:10562000D9013ED6BC5E3A87785FFEE12AECCBDF3B
-:10563000EFB2D3EFABAA3CBFD2AE28D25BD3064FBA
-:10564000A6FD4C7359584531FC2AA620F255BFCF10
-:10565000EC222FC01EA6D79A22291F593BF8C65FFD
-:1056600020CF53CD5F1EC1EF94A47E5BA3FB2FE739
-:10567000757FFA387E63A682058AE81EBC78FD2213
-:105680004877A27B72A7CE49F67D679BDD23F6099A
-:10569000160AFFC17BFE129B60EA85EB42D7A77416
-:1056A000AFE0852E3BF96B4B0FCAFBF6C2E0B99019
-:1056B000ECA2BC68DE8EF4CC0B0E13DD33567AF010
-:1056C00008DD9B57AAEED5B31BEFD563AEB478F8CF
-:1056D00093C987CA9582A42641B7EBE28C7662D241
-:1056E00048A127268DD4E43DA5027FDDF6F36FE9BE
-:1056F0005AEF3A5CAEE2F7EAF7A66A22E8F7A6BAF2
-:105700000F667EEDFD09EF417FE07AC1F732BCE91B
-:1057100023C7F4EE9F33245ED43E6C96FDCF90F801
-:1057200099E130097C84FDDE86E20F457F05AF3AC2
-:1057300077A4E8C6BED3FE1ACE05717A153CC4889C
-:105740004EB918FFC45FDE5E8763FE83CDDE4EDD9B
-:10575000FD6FA15310F7E05C319DDAC3E9148C1C96
-:10576000063DE161F1FB5BE1798D2C97D13A9F67B2
-:105770008E223FA02EEF05E7EBFB35AC6FB5AE8771
-:105780004EEE28C0FE78829BDE80ABC3D446CF1796
-:105790008DCCA0753884B5A7C8FC9B31D0CB9AE4DA
-:1057A000FDC73DBF63B8D841F78D5C08A8FB8F03E8
-:1057B0008F2EE4E3B6CCC827BFFE0526D77B4DCF9E
-:1057C0003DD9E2FEE39E7BB2CD7EF293CC89223FAF
-:1057D0004FCF3DD9D9E2BEEB573496837B68FDD3DA
-:1057E000EC941F1F7E4F36DF679E463CE3B19A283C
-:1057F0008A43A9FB914B9D7AE5C88197DF8FFC888E
-:10580000E69BB300FD1538A8BF8E3951CFEF146861
-:105810000EC28F73A22186EE85567CA9FCD743FD6C
-:105820009D8F024FEA5CE71F247F29BCAB736D0A92
-:10583000FF8ACFD47DECDA6AC16F3D79B2CB18F91B
-:1058400047867010A229EFD1E3029E1F8CD71B0060
-:1058500077D30A2E37C82F2EF2374F988CBFDBAB89
-:10586000CA26B92E99CCFF9F27F7A9792ADFBFC195
-:1058700098EF1F7E7F66629C6F1DC63BA7BD3716E3
-:105880000FDFFE6F739FF9233F90727974B4FE208F
-:10589000DAAB730F4A2F7CBBE8B334FA9D91AF8E1D
-:1058A000D0EF29CE75FA9AB18E22B3441CE00F29AD
-:1058B0001D744EE30F73FE9A467EE4D5E2DECF2BD5
-:1058C00085F3F273B4820F562D107986A9AC9EF839
-:1058D00036B9F77C6624E0F8FFED1C6DEF39D7C9C7
-:1058E000A34E51BE858F7EA7229C1EE3230EBFE8E8
-:1058F000E216CA1B233F9945E74EE30EAF72F3FA57
-:105900003B3FFD54D4530F5F74E35CEA4F3F9B452C
-:10591000E74CF30E5FC439D4DFFCF4B4787F0DA3F9
-:1059200038D6FB3FFD7C16CE9DDADDFA07A0EBCC26
-:105930004BF5AF615BFD60CDAD0BDC748E725A5AD6
-:10594000AE3847F916E8392369FEBA38ADF71C6559
-:10595000F748DF07787EE14BC1E76EC4C006FEEB77
-:10596000A53A47AAE46C7FF250ADB77FD73958B556
-:105970007ED94ECF462B98D0FF2F9F4FED12FB992B
-:10598000F17CEA6BAFFED685BCC3F1A3EDC4CFE3D7
-:105990001DED2EF80550875CDCFEA538CF87769686
-:1059A000D07603C439BEF1384F01FF41B73867F8EC
-:1059B000DAAB6FA440DE8FAFB7519ECF16F9BB00B4
-:1059C00031A643668CF37F00B1492F16008000009A
-:1059D000000000001F8B080000000000000BB53C19
-:1059E0000B5894D795F79F7F9E30C08008288A3F38
-:1059F000820413A433BC345BDB8E0A14A54D31DD65
-:105A0000A41A098E9120AF01D4B671B7C9C7188CFA
-:105A1000519B74756312638C1950D434B83B463073
-:105A2000A0D84C4CA4C63C96B05BE2B7DBF86162F0
-:105A30008CAF0C48926EFCD6D63DE7DCFB330F20D2
-:105A400026ED2E7EEDCDB9EF7BDEE7DCFB4FC430DB
-:105A5000634D1263530C8C19B3188BD733668A616C
-:105A6000EC591DC050EE1D665E4D246353631A56FB
-:105A7000B31C28CBCCD6A664067F6EC672194B9C8D
-:105A8000E09D6484FAC4B57AAA8FD0F4290D66C665
-:105A90007C8DDE45E75319CB0F8BCC64DF8152CF71
-:105AA000D2B5D08F69C2ACADB05E817CA32711E0C6
-:105AB000355D920D9666F986925D2C85B13A2D0082
-:105AC000B1F83F93BB15D7D1F656ED877E7D71892E
-:105AD000D62D004E4938C252B3617C7D51069BCE13
-:105AE000D8098B638A7522B4B3AD128E0FCFE0E371
-:105AF0007F5A14DE22C3F8C1E3B7E53AA0EE6E8305
-:105B0000D2C1AC8CA578A29768EF04384AC9952C0D
-:105B1000005B63976827011CAF7448D06E74452FF3
-:105B2000C99F84E7335ACEA733F63326B12899B1FB
-:105B300064AD231DD771167DA6671A6C1FD297CC52
-:105B4000622CC36A213C4C3C0178827D0E2D8C7006
-:105B5000B7C0F95886928BED49BAA1480BE063F0C3
-:105B600086B6C86DA671917F0FF537F1EF078CED02
-:105B7000EE96A95E85D5D267854960BDFA54F313C8
-:105B800088BFBA04A391CAEE6B850CE7D196A4DE58
-:105B90000DF3D8F56C7949C6E8F103560DED2B7974
-:105BA00023107432AECBEC4C81FF0B632AEC627392
-:105BB000186BFE2554FC1D6F879330FD0C8D806D96
-:105BC0003BF25383FADBB1BFBF9DD98DCC3FFE7E44
-:105BD000EB8C1D1BB4623DA4730573CF802324B2EC
-:105BE000068901FE129897E8B3DB1643FBA23FA09B
-:105BF000D30BB1A6E62DD02F55662E531695CC02A9
-:105C0000656238AC07ED89AF99DCC8577B4DD00E83
-:105C1000435335BCDCABE1FDF561CC857C3A1560C6
-:105C200006E5319BA3CE3691E6F1D23CF2211BF280
-:105C3000E324E6A1F5E3998BF6A3F69BC27A4D081F
-:105C400033ED501AD26BAEAC19139F3ADBBCF5485A
-:105C50007F5FA39D7DA20DA05378E4BA40FAD5E101
-:105C60007873E0B8F9344E1DEF5CA7619F4CC0C358
-:105C70007B897F9CA91ABB3B03C7B137A52CACEF2E
-:105C8000D59744F8C7F5371AD9274087FF68645479
-:105C90009E69B4D0FAFFD99840E51F1B15AA3FDBD7
-:105CA000984EE540A395EA3F6A9C43E5BDCB22723E
-:105CB00090FFEB3BE7B14F8C1CED37E17F4E8FCE71
-:105CC000311000F7CF1B9B8FF60B3EEA4F1EBBDD5A
-:105CD0008BEDB8CFEF737A0E3EC8DC2DC9C4971B8D
-:105CE0002C31A3E90FE733E1F90623D8120FE0E9DD
-:105CF000588E44F30F4EE270B35547F3D9356C0715
-:105D00008E3F96A3E7F34FD75462BB3D86CFDB9F10
-:105D10000630ECA768CEBC17114FF638A8CFF2C3F7
-:105D2000FDB7F376FB645EAFEE576DAFB359685EB7
-:105D300095EE833A583F83F89DE657FB7F96C7E57B
-:105D400030B4BF3B5553E41E031F1A1BEF4F7201C3
-:105D5000F870A11C2407C8459D4272A1F2A1CA7F18
-:105D6000BB6D1C8FA906C1E7E12007312407342E43
-:105D7000311EE44022BCD8199C67AF24E425541E90
-:105D8000A0443DAECA832A072ABF27829C4931FE20
-:105D9000737C2F845FD5F29495D3A5372EE21744F8
-:105DA000D76E9D055421F40742C6207C4F8E1DC638
-:105DB000153C6E6E184B7FDDB4FE8D7850F5C13802
-:105DC0007818757E3D2FBFEDF949BFA1DE46BE1D97
-:105DD000435F7D6655F515E75B9DCDFEA915F95529
-:105DE0003269A528284D9C6F42CF7F2C87CB8DCA66
-:105DF0003FBB6D8CDB4B3C67CA687DA79E67E49C0C
-:105E0000AB18E9BDD4305E1F4A5FF55C017AEFCF75
-:105E1000B82F159F8C796C1698674AADD9BA25D9D9
-:105E2000CFBFBE89D72BD07E6DB62AB49FE735325F
-:105E3000D15FB52723F592BC7C7146909D6116A079
-:105E4000E3D07103C9B757C32A5F8171ADB8D49D40
-:105E5000FE73CF16F41B5E3243B30EF6E5FB93D907
-:105E60008576CB3779E8AC04E37D3B74CC45FE8383
-:105E7000FD47521C630F824D41BB7415F41C4B63EC
-:105E80004C7EEECBB312ECBBE239991900753E5053
-:105E9000DB328CAB7F3AC26DE4E3188371B5625C90
-:105EA000D38ECFEF45FEBA00FC6980F64F4C75D318
-:105EB0005926630B9ED3111E2B22F46EAC7F63C751
-:105EC00053A796017CA15D52D0DF2894CDD45EFD0E
-:105ED00092ECC6756ACD859724F0737CEDCDCF84A6
-:105EE00041BDF3808E99605C61BB64F5C2FCAB3C44
-:105EF00011881956B15DF7D140BA5F6FFE50D8B125
-:105F0000CABD921B388655EE0A6EAFDE1B0CD73227
-:105F1000AD1F86F9B36C11B117EE006026B3DD44F6
-:105F2000BA6D8F416335A2B743F90ACD36E9C7355B
-:105F30005C1F33F645DCDDC097F2F12F933E3273E0
-:105F400078B180CF01FCD9971CFF2ADEEA84CEFF0E
-:105F50006C12CBF1C039EB8E9B2C2E38585D974CD0
-:105F6000E7F079A208CFF5610377919C1E952DE8A3
-:105F7000876DEE945DD8EEEC36EDD1C039EB3A2466
-:105F8000A645B8D3E0E678BA5681EDAB3A4D160592
-:105F9000DB8F1A980CE37D403713D271EA00D11FD2
-:105FA000E9EA92680B3F92F2FCF497915EB17E7A37
-:105FB00035EDE0FBB97080D3A7507E584BF46A965C
-:105FC000587C009D7FAF7979845ED86FC1737FE87C
-:105FD000413A57C0FE0C0AD25D263A5F00FAE0BC97
-:105FE000FAE39F240D98FDF49681DEBF52C743FF6C
-:105FF00055B7A07725736D447FEEDBD2395CC83F7F
-:10600000F8BD179E47BF37426F453E8C15FEF1C461
-:106010009AFE93B1B06059CC15E76AA89F91F00A37
-:106020004B053F418A763C6483716717BEFB18922B
-:10603000A36FD1CB36E48B26DD40EBB350E18A0E63
-:10604000B7A20C0E262FDEF52AAC931F733DE91084
-:10605000CACBEF0C1664A726218FF86704FA3B1908
-:10606000C737D0F11C9EDFD96DF01A008FACBDC0D0
-:106070003EE20F4C477BECD1A39E2AD00F95AD4654
-:106080007F1CE6C37524602394EB9AEEDF9F91603A
-:106090009CA4C4B252848D66AF8CF3B4E9AE8E9CDE
-:1060A0001BE6912CEF52BF5DB6E9B48F94F8EF294F
-:1060B000A87F9A96324758CAD7E979467AFE059D55
-:1060C000D0EFE3F97FE3E87BD5EF63AE29D117602A
-:1060D0004EC405971FAE7756CD61E24FC885802B21
-:1060E000D7BB228DD079D51DD6043CFFA7C86791B8
-:1060F000C87FEF6827C0BE6A5B25A25B1DF20F9CBC
-:10610000EB24DA37A81FF4083DF2526FFE84582CB6
-:10611000252B482AABEA96AD5E68AFEAE4FC348AE8
-:106120006F84FEA86EE3FA63141FB5011CE0A7D5C7
-:10613000215FA930D0FBA85F7FCCBA09FB7D713607
-:1061400013F4E67AA240CE881A007E19664A942596
-:1061500023C06E49DCDF52F5CA6D3B40D507AC3B2E
-:10616000D36D64DA8075EF3860098267791282FA3C
-:106170007FA753096AB779D383DAB34F5983E0DC39
-:10618000DE3941FD679FB107C1770E1405F5FFEEBB
-:10619000C59220783803CE3396DF21CA1F264841A6
-:1061A000FD172AA6A0F98BD3A383E061B3C08FF0BB
-:1061B0000355FFF4A28DFB41A1A58ADF1F5B83D7A6
-:1061C00051E3E29FCC095E6FB13D78BD6F4A977D88
-:1061D000E0F76BC1AF3F00F611CBDF82FFAF05BF29
-:1061E000BE0DFC7F84FF05FC7F2C3DE0FF63FD2B93
-:1061F000E0FF23DC0EFE3FC247205E41B8B3B1880A
-:10620000CAA38D25547F2BFCF588754F89754F8B5C
-:1062100075FF5A3CA9A5B36886E62B90D3793197D0
-:10622000F4A887ED6B060A310F30F496CC5A504033
-:106230001CEE538DB1688F2630F45B58C9D0DB1A41
-:10624000843B522C5B14B443FFFE1EB6FBDA65059B
-:10625000F5F989CE8F23719EAB5F811C66E3B88F01
-:1062600023313EAEBDCE08DE02ED0AC00B0F8162C7
-:10627000207F06F41AF64F5561B79E4159D27648F1
-:106280008FF4A8397088DADFF2E882DB0F3407B5C3
-:106290005BB03F94355A37C5F7973BD5F9BCD4BFAF
-:1062A0003655B2A35F7CF9C0BFC75560BFB6F7E3F0
-:1062B000567E0DBE3F3BF27206EA7527D861AFD914
-:1062C0003F8FB34B2760BEEFDAD44385316808DADD
-:1062D0002436038AAB6C2B5B07FAAEA6B3B516F572
-:1062E000504DFA321D4B267D24F20DA06DD15FC2B8
-:1062F000E01EF077D5F379E44A98F735CFC9BBECC7
-:1063000048BFEE372271DDC17639289E5994C5FD0C
-:10631000D645597AA2E3D5F637221568DFEC7983A2
-:10632000E35BEBA5739F10F0209484E74E99CE5D5C
-:10633000F59586F0AFCE774F964CF32DEC9C1181FE
-:10634000E7EAF3F0F596672934FFC2D415E5B8FF04
-:10635000D3094B7365F2F34031A35EBDBDB815F3AD
-:1063600003351ED93E56BCB55ACCDBA3E37CF856A8
-:10637000EAE19EC9C01FA78B26D848E78B7E5559F6
-:10638000DC1F2FD43B52D12EF4999508E4E3478BC0
-:10639000522290AE27B0C4FAA23D7A0794D5ED7C84
-:1063A000BD3E4B6F24F25B5F7BB68C7E8B3ADF4A3F
-:1063B000B1EE085F8FD0CD4574AA74379B711E3F34
-:1063C000FD78FDF22C9E2F3AED7EFF5EF453FAD25B
-:1063D000C3AD48971E3DA3F8B606E88AF6A0AF3BCA
-:1063E000B119F1A0AEB73C4BC4C9E91AA2ABAF5387
-:1063F00027FA2D6B6541FD78FC7C756FF07E2CEEE5
-:1064000073BF598676E905F0ABA1BA56D71087E776
-:10641000FF7457F0FE2A059E6B75DEB8B8007EAD9E
-:10642000ED1A911733F177972A1F0AD153A5635FAD
-:106430003AF7DBFA120C6E8C176B0FB5125F8FCE2A
-:10644000EFF426A39F9FF89091F286B78A67553F95
-:106450002020EE6118C7E98A527235D3FDF67ED04E
-:10646000667F3E6B22C6432514EFF5B1A10A34FEC8
-:106470004EF483A350EFFEF1195C77B81DFC3D5834
-:10648000D769EC5C741EFCAC612B080AEC7B789736
-:10649000CE2DE21333FAA715C23FFD5471E4C96053
-:1064A0005F9DEB3574BEDA8C30EED70A3DF9D9A189
-:1064B000E49F20BFD69E922D46F443216E21B88DD5
-:1064C000FB05759EE47F9A8BFE769B8EFC00D5EFD4
-:1064D000700ABFE382F0672FAC1FD293BF7A5C6271
-:1064E0004FC13E2A3BB7F52442BB336311F9AB4E93
-:1064F000B98DF28FAB7604FB0555EE60B8E64030FF
-:10650000EC0CF11BD4B8ED44D688FF3013E38F02B6
-:10651000796E3CCAC107829E6A3CB27696351EE50A
-:106520007DB35659A4E603104FF5C70F57E17EDD42
-:10653000B561568A0BD61D257C0E7EC1E38EC10443
-:10654000C6FD23C6F13AD8C9F9BB5E27F13803D896
-:1065500095E6334AEEF5D034E81A8E24BDC45811BE
-:10656000CAC39AA53C8EB463CE15CA17845E0AB519
-:1065700097DFD70EC8D101FAE17C16F737F3F5CCD7
-:1065800081766A6D8495ECD63423F7B70B1EF6D866
-:10659000900FA6417C6C08C8674F330F49D86FEF46
-:1065A0002310E266FAE3FBC55A8B2E3AC0EE31B6F1
-:1065B0009EFAABF38326E1E36F35BF05E637FBE7D1
-:1065C000077C4721BE3FCFB1923D4E5ACC582FC9D0
-:1065D0006303C9A37A9EABC067988FC59C09D2ADEF
-:1065E00076D7EB940776B25E8A470A23F93E0A71A2
-:1065F0003F0887F19265737CD9B3B9FE589B1D6C37
-:1066000097BBB2ED5236943BB21DBA6CD26716E21C
-:10661000CBB58257C04F891F1843EFAE7997C75546
-:106620009F831CA09CDFDF2029A9417E10E7EF7A21
-:106630005EC5AE304FFF5CC483CBDE9B1E877114FA
-:1066400097ABE5EB4C4A6A009FD6239F035E2A2D49
-:10665000553F42BFDBB12E4EC17C7F3DF2FD7444FD
-:1066600023E7EB58F887F1C5283EF704C3F0B70BD2
-:10667000F9AB8E19AC6847EA3B43DBAD5ACCEBA4CF
-:1066800064831C84FBE52049F065B34372A3DE6F8D
-:10669000BEA1E579AC5289F256F74025F225FD619D
-:1066A000BFCA796E9CFF1E00311E62DB63496EA873
-:1066B00011F4C8DF8BF3DEA3F5BE8E727C52E7497E
-:1066C000C67CCA49A7D18AF32F65E070807E296510
-:1066D000BD54F687D775786972D7548C9B3F701874
-:1066E000288FD3BCA12502F56926DB60B9908EC640
-:1066F0009D1DB8993DBE5F018CC42EA874A1BCD06D
-:1067000056118772BAEEC8B6CFCBCE1D7F7CCD1F97
-:106710003AEEC290A2E617ADFA78CE36BDE9797EA0
-:10672000FAD5334F3AEE57A5D708FD60CF53000F87
-:106730004BD8501EC6352ADD8CF06F2CBAA9F84C08
-:10674000D20DFD1451067689F44B283D55FCD6B187
-:10675000061DCF7335BCB714FADFB741A3A07F384D
-:106760008ABEB7A083D7C49BBC1112C59BE3D14599
-:10677000A5874A9F33D17CDC99FB65CAD3FD5FD3E3
-:10678000A52BDBF1D0D7C963A8FC8D276FCBD785AC
-:10679000C86588FCA9F472AC8B243953E958AB3036
-:1067A0008A5B6BBB23AC6EE6A79F19FE21FDF09EB2
-:1067B00082F231ED12DB297D13391CA07B8D50FA5A
-:1067C000006FD851AF3F951D6C8754BA8DA77F5489
-:1067D000FDF521F39EB448743FC0E5F3970637DE1C
-:1067E0002FAAF703EA3DC061A1F742CB0FC1EFC06A
-:1067F0007B972DE97D13D15FEBD7ABF3F0FBC70F90
-:10680000D7F74E5D0DE33F9CC7CB7EF4D302607B90
-:1068100018CFC37D38C9E042BC7D28CD9C8F76FC63
-:1068200043E9A1BB381CAF57105E1A3FDF0270BFAF
-:106830004ECDDB3D2AF4B09BEF63E9EC7CEA27B157
-:1068400037111F8AC44A681D498A2982FD7CF88B4A
-:1068500019594DCC7FFE966CEECFBA55FDAEE6B120
-:10686000FF41A23CF672300116CCB7CF7FB6683A32
-:10687000D49FFDC7141BDDFFAD095E1FED6832E537
-:1068800007B7D13CDFFF6A48B722C3BFAF11FB9700
-:106890007F8DD797CFA078A252D0D01E3393C7B1A7
-:1068A000EE9428B447AA7D1A3E75D81C98BFBC0444
-:1068B000F68BE903E0994F2605DAB7D7F7FD3A0DD5
-:1068C000E7A9D4BB32AD184F363F9F847E40E5BE6A
-:1068D000C7D3C82FDDB7390DE38BCA965FA7D90997
-:1068E0000E77507CA3E5E7BE72F0CE3D5B02FCE084
-:1068F000EA5C99F65F6A7CBD00FDD345777CF618AB
-:10690000E6C367FCA34479B1FB59EF636837CBD288
-:10691000B91CB1ED46D2EB301FDD3BB6CEFCF15ECB
-:10692000D4E7A7D33FD69543BFEBD95AC24F1973CB
-:106930003F118FF9B04D12E5C3FCFDA7D23DE68AA9
-:106940000D923E2116ED61B44D56705C34EDE3813D
-:106950004DB61EAC2F7B98D72F32B8DBFB709E67ED
-:10696000F5D65605272A995E12702F7C3D9BC75D90
-:10697000CB9F90C81F57D799F14C5C73E039AF0B90
-:10698000FAB31BFF46FAED27822E3F7AF8FD371344
-:1069900014BC4F72DC443DF2DED31752517FE5C781
-:1069A0005CCA403E9FA177ECACC273B718287F98B1
-:1069B000939928C743FFAC9FCF7B0ACBE50FAFD895
-:1069C000598579D01D468AA3D4FDAD91140DC69B7F
-:1069D0006F34FFEC01C4DBC5A78DE447AF69BE2D62
-:1069E0009E8D21A76AB91FE8AFA431F652A391CAC0
-:1069F000971B2D4C81231E6C4C20F85F1B152AD948
-:106A000012CE5F6B44BC3ADE7CD910EF2BA0AF7284
-:106A100036C17CE06FDA4CF6C93980AF19B73B5B01
-:106A2000368B73CD80F13657F202C443CEE6D53DA6
-:106A3000E88AEA73787CF476DFA624F2A31F3EB7D7
-:106A4000BB0ADA17E794A4E078E3AE6B14E7BFD192
-:106A5000F57819E5F55B0CFC7CE2DC179F4E8BDFCB
-:106A60008979D7B774147FD7EF3AB77B33942B9FCC
-:106A700058AD0FE4F76F7ADE64B19F5BC9D57878C3
-:106A8000F8F672F5EB24929F1690AB8CBF5EAEEADF
-:106A90001F5E4FF87B28A764510EECFFA2CE9584B1
-:106AA000F27471E6F788CF5DC725C2BFAAC7D5F1DA
-:106AB00045E2BC351ACF13E40F0A3DFE25447E881B
-:106AC000DFD7BB3E4D437FF8CBCEA55F7BEE238D5A
-:106AD00078838E792D2395A1ED797A478A15CE9703
-:106AE000A7E17EF028FF55DCCFA9F7EDF88779E123
-:106AF0005A613F9DB0B1A818B47F92372C13EF397B
-:106B00007E78498BF117C4751F05FB97ECA3003BFA
-:106B10003EDE7E6F55D6E13C5ABFDE9D7D46C3BC4E
-:106B20000176FBCE8130E60D587724EE30224F43BC
-:106B30001CDA3589F402D20DEF657C5D335B10BE43
-:106B4000A4E774F41D81F88AE755989CE73FE7A510
-:106B5000AE2B99A86743CF5B77F40AF1476DE7E363
-:106B6000D7243AFFC24BDACC5B9FFFF57D573291B9
-:106B70007E977403791847F9F403994887BA635CE0
-:106B80009F7F5B3CA8F5559BF43CBF2759281E2CE2
-:106B900090AF521CEF3BC5E3F8BAAE3DA44F87BBA4
-:106BA000793EA55ED35B188FF98786733DA8CF86A3
-:106BB00013787C05F3DB116F7353841DD40E252DE0
-:106BC00006BDF6CA083FF0B8EE22CAAF1EE7F1D400
-:106BD000D27BA4CC70867EC5659467A82F5B97BCDA
-:106BE00011F9FCA27B226682D8DB99FF5347F9B7E3
-:106BF000D7C22D32F9AD501B40BF9173B865FE70FE
-:106C000086A9717A38B307F4ABD72B3FA1F8F834D3
-:106C1000BF27ABBF9DCB133BCAE5C9B9E1757D4228
-:106C2000C07CBB519E68DFDC7F5CF4DAFF905C7651
-:106C3000DBECDD2897E1A80B71BE8428B724897EA0
-:106C400079FE7B4073B788C78B646AAFEF94D92411
-:106C50001C931041F7F5456CAB16FDDD45CC339721
-:106C6000BF9319F8CD77A1BDF835391BDF6381FFDC
-:106C70004CF7C785618ED435E81F692481574FCE04
-:106C8000E2407B26DE79CC9525B2634393C2C94F9F
-:106C900059B8C4598AFB1DD10F5ADE0FE6213F8B2C
-:106CA000B98732F13E93798732F19E53ED77EF6BDE
-:106CB000E10D64179927E7DE8075C272B9DDFC1C0F
-:106CC000EF9F419FD48BFBCF02F9C6331847AD39F4
-:106CD000CEEF09FB35C91FE07B2D17E019E97A05D6
-:106CE000E86A47FBE360763BCACFAC896E949FFAB3
-:106CF0008312C3776B755D8616CCEBD4E906E29000
-:106D00009F3777FE418FFC5CDFF1BE5E9985E379AA
-:106D10001E08FC750DE2B75ED82F67E76D1F60DEB9
-:106D2000CD798A5B51A7F67D8AEB6BDA0F51FC5E59
-:106D3000CBBC14BFD7B605F3CB7002CFB387CA471D
-:106D400058AE42FA528517EEE07271AFCC1A28DEC7
-:106D50001779D38509F1E48FF8C7093F51BEF218BE
-:106D6000FA2F83D325AB04530D86B936A05FE44ACE
-:106D7000E3FECCE0EF5ECEA920BDE2CEF929BE8BCA
-:106D800011FEEEC24DDBB472C07E1676F33CE160BC
-:106D900018AB3C42F4764C413A446695987373497B
-:106DA000AE32E99D8F86E73543CFF1A4C8679EC612
-:106DB0003C4F867FDFC589895C8F3137F14F8F86E5
-:106DC000AFAFBE7B51C7AFC89582E2A53512CF4F9A
-:106DD0008DA757F01EA55CDCA3948B7B9472718FFA
-:106DE000522EEE51CAC53D4AB9B8472917F728E5D2
-:106DF000E21EA55CDCA3948B7B14AC3F8D5BA5F7F6
-:106E000070CFEF44FBD9833236D90FF7C784C093D4
-:106E100083FBF7C748C1F06489FAE7E43EBFD39526
-:106E200081794C8B906F2502FDAF8B269E5FEA8A9D
-:106E300070FC1DE2B97C61D33EFE1ED14EEF59F2CB
-:106E4000639696A27C0DC71A18EAA1865CC7BC5C43
-:106E5000A0FBA9530B52B7917E3459F19EBBFFBEE4
-:106E60003BA2282FF796CC6458725E7AF6861C8077
-:106E7000E79925E25BD013DF2951E3499867413751
-:106E8000BFCF28906BCB71FE35934CD9A87787B2D2
-:106E90001CC5B901FC583879552AFA413D3AE50339
-:106EA000CCA7BADED5318CA3D4FC9BDAAF276BDE3E
-:106EB000521CB7303D654316EA1B102ED46F763D49
-:106EC0006BC37DD935E15213E92B458BF2BF54F0EA
-:106ED000EF7C85FBC35EBDA28DC1B83D6C5EAC4B43
-:106EE000E1F755E5E2BEAA5CDC57217DDEC1BC19A5
-:106EF00094EF413D96BD508F65E87BAE67724A5670
-:106F0000E652BC3D9414F81E6C11CA15D73349C81B
-:106F1000CF3B05DF26083DD3935D524DFCCE3C347C
-:106F20004F8DC8BF5DD105DFE3A9E3FCE319957779
-:106F30007F87EB6716A5E7EF5DA73017BEA7BDFB00
-:106F4000D549944FF2B9352E5D14C020E3A8BFD8BF
-:106F5000AB3CBE65095C5EEE3E1C4FFD9A441ED400
-:106F600019D39B16837657C8950A1FF90B7FE7E361
-:106F7000CC0218CA63123F9FF3EEDEB468807D92A4
-:106F80004983F971670B6FEF1372E79C2EE613E7E5
-:106F900061464F12D263F0F8AB490F00BCC5ECADAF
-:106FA000E0FADE9B467A9A79D3F0BDD015C9731604
-:106FB000DFDBAE3A92B50CDFD75ED17976235C7316
-:106FC0002487C3D2A1B396C0F6899E247C8FBBEAE6
-:106FD00048F6327C9F7B65E2A1DDD1D60058F7CA26
-:106FE000596CD73F9AB32C1FE06283FB5423F2CD38
-:106FF000BF72FE321DECB880F8A9E9E2FEFAFC830C
-:107000001D575F417BDC1141F7F507729389DE4D17
-:107010005DFB9F407EF31DD2911C6C69FBC3EE5F4C
-:10702000513F03A5518A0D9E1C4CB934E4FDC77D28
-:10703000B86E71B8E70B84D7E7FD80F6513C81CB81
-:10704000F3C6BCF9CB503E7D1D077F89F2571C0566
-:107050008E2CEEE76513D1A7FAF0CC7CCC03F82296
-:107060007ACB70FEBADF1AACC8A7D587E3E7635EB8
-:10707000A02397E7A7AB6EDF9A84F65573F4A57D3E
-:10708000BFC23CE56F4D743F531FC3FDBB6AB939A6
-:107090006F35D16FCF3E7C37E27BC944F7A45530C2
-:1070A00007AE57B56F06E5D58FFDF9E332A44381EE
-:1070B000BC6B1FD67FB1D7A4413CF4E9ED51DF434F
-:1070C00039ECD3519C5925E0AAFE097C3FE10385A8
-:1070D00044BFD8AD49685FAB27FCC35DB8EF6279A8
-:1070E000EB6E8C73D87E03DD155C7A09F006E32E17
-:1070F000B5EAE895AAEFA5082DF2CB15696BD94E34
-:107100009CBF95F7BB62DA4AF874B5DEC6703DE8FD
-:10711000C7505F5D91B605D55F6ADD9F8971E8E56F
-:10712000DF16533CAAF2F9489CB1D710640F4913FB
-:10713000C489F71264665DCC0C76B64A80978F3CA2
-:10714000E7DBC9FCE32FB7E9BC7AC05195816DC07C
-:10715000F7C1AA3C5427FEB008CF57AD694E437F14
-:10716000A52A7BA00CE5E292891913A0DFDBC25EA1
-:1071700055B7AF5F8C7EEF78FBF98BB03F5F0A3974
-:10718000FCB2D3E40EBC1F0C2DFFD8C8947702DEEE
-:107190000DDFDF6020DF5D9DEF6DBDA716E3B3BAA5
-:1071A00018AE3FCE42FF36D0633784DE5BBE2EB8CA
-:1071B000FFB5DC18FE2E553F9086764F9DDF97ABCE
-:1071C000EAB58134D457A1E38A65A16F5E9648DFA2
-:1071D00054B74BE764C053B5D1E5C6F73BD5184C5F
-:1071E000F2736A6F4A7C5C429EC03B8C7D3C2F9957
-:1071F000CE5DDD66B29B605C4DD84024FA43B5118C
-:107200000391E8E7F88ECAAC45902B364ED067BAAA
-:10721000205940DEB1CAA3B39B32C7A033FA4DF860
-:107220003E07FF1BD6DF95379DD6ABEC0CA7F59834
-:1072300065200FF9B47257F0383C972540FE7C9DCD
-:107240007BE202E3F164B1EF41E91CC9C9E09F3F71
-:107250004A42BA576BD806BC47BC2CF1EF1E00A6B9
-:10726000EF1E2E8BFBC8EA3F99C3905F2E7F594BD0
-:1072700072EB930648AFBD7BA484F4814F37407A0C
-:10728000ED44DEBDA4C77CD10365A8A7DE3D52C195
-:10729000DB270D9429D0DE8630B64F6564EFFF2BD7
-:1072A000CF49FAA358E6EF1BD81E9D85E78136F536
-:1072B00037525CA15302E3EE3FE6A9F7367AFFB9F5
-:1072C00065BFDCF89872B01DE5B0D24CF91CF09F98
-:1072D000DA5E413F6F699C15F3E295388EF3813E8B
-:1072E000F0FE2F36E67A05D2675994A3202F17EFC8
-:1072F0001907287E00AE263FBDEE77068A23077564
-:1073000043FB504F65463916E6017FD5EA7B37A22D
-:107310004B7F5537D083F77E8B64AE8FD87ECE57A8
-:10732000BE8C3DFC3B09717FB854E01FEC166B46E8
-:10733000BE90387DDFE83CFC0EEA155F6F0AE9E39A
-:1073400050B9B9D4F95424EA873360C75D0171FE9E
-:107350009915FBE99E7E09BECB80F2810DC1FC3000
-:107360007CE3A714EFB12702EA910FB707C3A17C12
-:1073700084FCE80DD23B2E92A76773B91F5633BF2A
-:10738000B70EF13002DF0DB01C009F088143FAB345
-:1073900012EE273C8BFF8D789CEAEDA7F8FC207F4E
-:1073A00017DB04F68BE08E70BA37D61C04FB14CBC7
-:1073B000ED13DA859AC85ECA4BF93A0C743FF2684D
-:1073C000D7A7F49E11F890F22F355DAFC661DC7E31
-:1073D00000E3845CB28371F44EA5A32B0EE30DB5DC
-:1073E000BE56E34913EFF1C94F57EB9DB2370DF786
-:1073F0005F23F56662FB01B1EF5A0DC032C262DF56
-:10740000129777D625933E0FA5DB0EC1AFA017329A
-:10741000E99DC5519E1750F54095D02727B03E8372
-:10742000CBBD45BD5792F0BD5CF898FA213E4FE8C0
-:1074300037D640799BED797CDFEA789A97E795A873
-:10744000BDEED895CCE919384E19790739A2875283
-:10745000FC7A05E53F81E4FF515D1C9CAB7AB76483
-:107460006D423D55BABE10BAB355DAD585942F1387
-:10747000EF3F43F715CA4756D80BE9494D74416CA5
-:10748000C07C97215C4FC8223D43EFE81F8C7DB242
-:1074900010F3133F2BDD46FC3C626F02E51CCFB3BB
-:1074A0008BEB71149B9B9AD17CBCAAA17963FC18CD
-:1074B000FB08DD6795A3B9304E195DAFEEF7B24911
-:1074C000DDDF7CDDC4403C2C595F3811CA55C6BF96
-:1074D000160FFCBC97BB0C5EB4AB55A5AB37468D05
-:1074E000C137A3ECC1AE00FB351DE9EBA67B8DF1E6
-:1074F000F61F5AD64ADE7ECC133190AB56922F90AF
-:107500009700BB30272F24DF50B9621AC69DCCB13B
-:10751000621ADA1990AB32EB1871257E59A2A1B725
-:107520001B2E2A43F7733E8FE749E7E47179E9B6EA
-:10753000D97DA837C7FBDEE2BFC53EC6FBDE2251C0
-:1075400033FC1ECA5B625C8482F740050BC279BFC4
-:10755000E3260BE66D068F5FA7BCEEE063E625FC35
-:10756000BEC0CC26417B4FC2AC96403BB275365F65
-:10757000273C87FB2DF5E9BAAFCF0B65448CE4853A
-:10758000C86FC808A77B125FE7E764B706BB732D17
-:10759000789FE1EB85E810E4A9FECFFF1D87F6D5C3
-:1075A000D7FD09BD07F3DDF894DE896D16EFF44EC3
-:1075B000748A7756BD4A047D1757F47121F6DB2291
-:1075C0004A7F7E80E789D5528DFF03E2DFC9B3C7CA
-:1075D0008E7F631CE6C0BC80123F561E25302F9064
-:1075E000AAE579012C312F909ACAF30208635E0054
-:1075F0004BCC0B603DE60510C6BC00C29817401886
-:10760000F30258625E00EBBF10DF3F0C8262E2F9CA
-:107610004A33E9F5B5F8BE1DF0B7F638BF775ADB47
-:107620002AD3FD2D7EFF80F66DD4BB9976F16EC610
-:10763000B38DEEF1EA3B642B92A85E377412F338F7
-:10764000F58724EB7AD42B8D4B68FDCDDDB91F94E3
-:10765000627DABCEAA51888F381D9B257AA75FDD4E
-:10766000DD4A79A7FCF8E37AAA6F9318E649EF356B
-:10767000F038D729436D16DD83921FEC34F452FCA9
-:1076800051734052CA03DF69CCB9467A40BD4FAE50
-:10769000E04DCCE93129E563BC031979772EDE4D45
-:1076A00057E03D33BE17976FD0BB7E2704A41390DD
-:1076B0000F77F0F7CF16F847F21EF2AEA9BAFBD05B
-:1076C000467C0F157ADF3CF23D5DC8BD73D96C7105
-:1076D000AF6CE3DF57143D5D7EB003D61BDE6A203E
-:1076E0007FA321D7F120F2D1499D9DF223278F9BC3
-:1076F000282E3ABFEDB6A0FCC85096A37A36E59B7B
-:10770000A650BE628D4E227BBCA028251EF1B8E09B
-:10771000948EEC4E4F56492DF65B334BA17C548131
-:1077200081FD82E611EFA5547A1434496E0DC02B09
-:107730009895DED92F073461BE725067DE84EF9AC8
-:107740009633FECE41E59B35DB24E21B4C10203EF8
-:10775000CB043E9777FFFE3ABE635869E07E6BA28A
-:1077600086DF5F276EE1EF191E640E3DDAD955C83A
-:107770005D32D9C7DF0D40BD237C4A12F7CB957827
-:107780009C7FC5691DBDB72D88FF719A83EC743E3F
-:10779000BD6390BCCBE49B778C2F3FA1EF184EEAE2
-:1077A000B85E013C523CD4837C4979190795A71BEC
-:1077B0002BA9AC13DF438C7EFF3F7416E3C4C4F8DF
-:1077C000082BEAB971BF770BFBFAEFBD768AF76B2E
-:1077D000899ABE6C05F1F127B315F1A1BE13ECB681
-:1077E0009534239DEC91CC65A1EFC14003025E0B63
-:1077F000F12012E6B53D76FCEE68E8B864A177C9E1
-:10780000A3F4E3B6C7F09D487DAA649114CC7F6FC2
-:107810002D88837D174E4FA67DD777F2FC286128EF
-:107820000EF3E79C5E91598EC3B373FDF5C5426EAE
-:107830007CD09FF3C977DDC86FDF206FBA17FBBB21
-:107840009889BEA7A63FD84FF11D53297FAAF2CD34
-:10785000705B7C0BF2CDEF67F338B2B4F47D1DDAC8
-:10786000FF9E6CC709DC4759F9B5C7E2E87C63E7BE
-:10787000AFD477EAA1F9AB40FDF9FFF13EFD9DC61B
-:10788000062ADF6B5C47656FA38BDA03F4FF7F8EFC
-:10789000A3FF43F39FE7B05F68FE93199528B29F5B
-:1078A00020DF3CDF1C92EF2C9AF0C026C0DF82ED77
-:1078B0007A2B56A9F94F7C3FBCD64CFAE0F2EC315A
-:1078C000F39E2ADECC94271D66A62CC4FFFCF4147C
-:1078D000AD06DABF107450F38E281F783E940F2C3B
-:1078E000513EB45ABF7CBCA00711CEE176DE45768E
-:1078F000DE4474DDB81EF407C02B9925487F5C0D6B
-:10790000D11F1070DC47DF55751B18E609D5779439
-:10791000F3A1F82A6B0C7DE2E1FA646A98E725FA94
-:10792000DEBF2E8CDEE79E14EFE14E6EE6EFE1CA7D
-:107930005909AD3B865E89447AAC9C3074F679E88F
-:10794000BFF2D766F257364EAAC8FB5BF4CAE06CAA
-:107950008E8F67F17705B45FF7BB024F48781FBA87
-:10796000E67E66433AABBF2B102FEEB3BFC5EF0ADE
-:10797000DC3667E237FF5D81CC39F1A581BF2B9002
-:10798000D93989C3EAEF0AB0F8D2717E57207B4E0D
-:10799000EEE8DF15983D87C739E3FDAE00F8937335
-:1079A000707F3A9BFD4E2C13C53E43BFA73D2DEE85
-:1079B000EF7A348E522C0B235D5AAAD7B873B07C61
-:1079C0005BE3F939D6033FE7E33E0A9FB2DD9E0E43
-:1079D00070A2C1437AB227CB5E80F583367B21AE9D
-:1079E000139A3747DA627C0FFB5984EDA1EFAE544E
-:1079F0007AAE98C3F9FE0151CE6D1AFB7BF207E611
-:107A0000F0EFD56EB56FD8EF7DB82F75FF6CEB8AB0
-:107A10001C92A72CFB32B1DF522C993926E8FBD4FB
-:107A2000D17CE612FBE2FC05FAACF83CF707A94C66
-:107A3000D3BAA3D17F9CFC883B1AF73BB979C884A1
-:107A4000DF41BCE81A32A17D7FF1E12113D6BF6886
-:107A5000E7EF9543E77F710EFF4E206DEE108D9F8F
-:107A600006FFDD4BFEF95034FA4F6995E737D27DBA
-:107A7000CB8199645FA609FB32ED91E99D03C06F4C
-:107A8000D39E8BA2FB6C961F4BEDD5462EA7D58FB0
-:107A9000941FE950E8BBADE2F301FECE4C37EC3B5E
-:107AA000C8FFD20EF3779700239E0EE808469E4546
-:107AB000FFCAC9F8BBCBC9426FA09F560A7AC15909
-:107AC000F9E675BAF7C7F1381FDED122FF75EA86ED
-:107AD000C5F769168C43572D59DF4371E18E917AB2
-:107AE00011671EDA887133F86F41F5D5E5AFF7A05D
-:107AF000BDA939105CEF6CB846F12BF86F41F5F772
-:107B0000FFFC9C9EFF7E41703DD07707F29B4ADFD1
-:107B1000933ACF4C8CF34E3AC3ACFCFDBE877EAF9C
-:107B2000A4457CFFBCE79FE7E7F0F7A29CDE30DED0
-:107B3000FDCDF8A389FABBE6B37494875B95AA5E82
-:107B40001AF9FD133D73517E6F5104E99D7A115767
-:107B5000D5955BC8CE27D619497F15C8615684478D
-:107B60007EFFA448167ACA43F2DF775734E5F1E87E
-:107B70000008C7CCA27B9FB8260E0F4D34907E28FC
-:107B8000D094D4EE87F24D4DF077EC2FA07E90513B
-:107B90007E793EB55EEFE1DF896B955C8C739B244B
-:107BA000FB73F8DD639324F2885566BA2F18C4FC82
-:107BB000229C677BB4FBB90A5867FB3D19E41F0F91
-:107BC00032AE4F5D4BF8BDD5F6E892D2D5D8BEF4B3
-:107BD000766A3FF297942773D07FAA0AB3A2FFB4C4
-:107BE000DDC6FDEBED8BD3A9FD98A4ACC773BB1E1E
-:107BF00061B4CEF6C5FCDCDB9F9C2ABEBF709B50F7
-:107C00009EB737DB27E17DD47C8BE30CD26BB2B817
-:107C10008FDB9E0CF5503E23952C7D10E799C5F720
-:107C20005B6753885E2797DEFEE43E85CC8817EFBE
-:107C300085EA1745501CFCBF93011353F046000022
-:107C4000000000000000000005001500000000001A
-:00000001FF
diff --git a/firmware/bnx2x-e1-5.2.7.0.fw.ihex b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
new file mode 100644
index 0000000..a99c41c
--- /dev/null
+++ b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
@@ -0,0 +1,10178 @@
+:10000000000028B0000000600000068800002918E9
+:100010000000161400002FA800000098000045C042
+:10002000000073C400004660000000CC0000BA2845
+:10003000000099A00000BAF800000094000154A04C
+:10004000000057BC00015538000000B80001ACF8B2
+:100050000000CE2C0001ADB80000000400027BE8D7
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000060400CC0000000418
+:10010000020400DC00100000020400E012140000F1
+:10011000020400E422140000020400E8321400008B
+:10012000060400EC000000040104012400000000AB
+:1001300001040128000000000104012C000000005F
+:10014000010401300000000002040004000000FF70
+:1001500002040008000000FF0204000C000000FF81
+:1001600002040010000000FF02040014000000FF61
+:1001700002040018000000FF0204001C000000FF41
+:1001800002040020000000FF020400240000003EE2
+:1001900002040028000000000204002C0000003FC0
+:1001A000020400300000003F020400340000003F61
+:1001B00002040038000000000204003C0000003F80
+:1001C000020400400000003F020400440000003F21
+:1001D00002042008000004110204200C00000400A6
+:1001E000020420100000040402042014000004197A
+:1001F0000204201C0000FFFF020420200000FFFF7B
+:10020000020420240000FFFF020420280000FFFF5A
+:1002100006042038000000020204204000000034E0
+:100220000204204400000035060420480000007C41
+:100230000204223807FFFFFF0204223C0000003FB7
+:100240000204224007FFFFFF020422440000000FC7
+:1002500001042248000000000104224C00000000BC
+:10026000010422500000000001042254000000009C
+:1002700001042258000000000104225C000000007C
+:10028000010422600000000001042264000000005C
+:1002900001042268000000000104226C000000003C
+:1002A000010422700000000001042274000000001C
+:1002B00001042278000000000104227C00000000FC
+:1002C000020424BC000000010C042000000003E82C
+:1002D0000A042000000000010B0420000000000AB6
+:1002E0000205004400000020020500480000003222
+:1002F000020500900215002002050094021500205E
+:1003000002050098000000300205009C0810000063
+:10031000020500A000000033020500A40000003028
+:10032000020500A800000031020500AC0000000238
+:10033000020500B000000005020500B40000000640
+:10034000020500B800000002020500BC0000000227
+:10035000020500C000000000020500C40000000506
+:10036000020500C800000002020500CC00000002E7
+:10037000020500D000000002020500D400000001C8
+:1003800002050114000000010205011C000000012B
+:100390000205012000000002020502040000000125
+:1003A0000205020C0000004002050210000000409F
+:1003B0000205021C000000200205022000000013BC
+:1003C0000205022400000020060502400000000A89
+:1003D0000405028000200000020500500000000714
+:1003E0000205005400000007020500580000000844
+:1003F0000205005C00000008060500600000000423
+:10040000020500D800000006020500E00000000D13
+:10041000020500E40000002D020500E800000007CE
+:10042000020500EC00000027020500F000000007B4
+:10043000020500F400000027020500F80000000794
+:10044000020500FC00000027020500040000000176
+:1004500002050008000000010205000C0000000178
+:100460000205001000000001020500140000000158
+:1004700002050018000000010205001C0000000138
+:100480000205002000000001020500240000000118
+:1004900002050028000000010205002C00000001F8
+:1004A00002050030000000010205003400000001D8
+:1004B00002050038000000010205003C00000001B8
+:1004C00002050040000000010406100002000020A8
+:1004D000020600DC00000001010600D80000000058
+:1004E0000406020000030220020600DC00000000F7
+:1004F00002060068000000B802060078000001143F
+:10050000010600B800000000010600C8000000005D
+:100510000206006C000000B80206007C0000011416
+:10052000010600BC00000000010600CC0000000035
+:100530000718040000960000081807600014022342
+:10054000071C000034C50000071C800034DB0D329E
+:10055000071D00000A1D1A69081D14405D78022558
+:100560000118000000000000011800040000000055
+:1005700001180008000000000118000C0000000035
+:100580000118001000000000011800140000000015
+:1005900002180020000000010218002400000002E0
+:1005A00002180028000000030218002C00000000C0
+:1005B000021800300000000402180034000000019E
+:1005C00002180038000000000218003C0000000182
+:1005D000021800400000000402180044000000005F
+:1005E00002180048000000010218004C000000033F
+:1005F0000218005000000000021800540000000122
+:1006000002180058000000040218005C00000000FE
+:1006100002180060000000010218006400000003DE
+:1006200002180068000000000218006C00000001C1
+:10063000021800700000000402180074000000009E
+:1006400002180078000000040218007C000000037B
+:100650000618008000000002021800A400003FFFFE
+:10066000021800A8000003FF021802240000000086
+:1006700002180234000000000218024C00000000C2
+:10068000021802E4000000FF061810000000040039
+:10069000021B8BC000000001021B80000000003420
+:1006A000021B804000000018021B80800000000C2C
+:1006B000021B80C0000000200C1B83000007A1204B
+:1006C0000A1B8300000001380B1B83000000138805
+:1006D000021B83C0000001F4061A2000000000B2D3
+:1006E000061A23C800000181041A29CC0001022740
+:1006F000061A1020000000C8061A100000000002B0
+:10070000061A1E3800000002061A1E300000000201
+:10071000061A080000000002061A0808000000027D
+:10072000061A081000000004041A1FB00005022871
+:10073000041A4CB00008022D061A22C8000000203E
+:10074000061A400000000124021A4920000000009F
+:10075000061A14000000000A061A145000000006D1
+:10076000061A150000000002041A150800050235DB
+:10077000061A151C00000009061A15800000001456
+:10078000061A09C000000048061A0800000000020E
+:10079000061A08200000000E041A1FB00002023AD8
+:1007A000061A2C2800000002061A23480000002028
+:1007B000061A449000000124021A49240000000097
+:1007C000061A14280000000A061A14680000000621
+:1007D000061A154000000002041A15480005023CE4
+:1007E000061A155C00000009061A15D00000001456
+:1007F000061A0AE000000048061A08080000000275
+:10080000061A08580000000E041A1FB80002024120
+:10081000061A2C30000000020200A2800000000135
+:100820000200A294071D29110200A29800000000F6
+:100830000200A29C009C04240200A2A00000000070
+:100840000200A2A4000002090200A4FCFF000000B4
+:10085000020100B400000001020100B80000000124
+:10086000020100DC000000010201010000000001A3
+:1008700002010104000000010201007C00300000C0
+:1008800002010084000000280201008C000000002A
+:1008900002010130000000040201025C00000001BE
+:1008A000020103280000000002010554000000308E
+:1008B000020100C400000001020100CC00000001A0
+:1008C000020100F800000001020100F00000000138
+:1008D00002010080003000000201008800000028B2
+:1008E0000201009000000000020101340000000439
+:1008F000020102DC000000010201032C00000000E4
+:100900000201056400000030020100C8000000017F
+:10091000020100D000000001020100FC0000000103
+:10092000020100F400000001020C10000000002091
+:10093000020C200800000A11020C200C00000A0022
+:10094000020C201000000A04020C201C0000FFFF13
+:10095000020C20200000FFFF020C20240000FFFFFB
+:10096000020C20280000FFFF060C203800000002C7
+:10097000020C204000000034020C2044000000352E
+:10098000020C204800000020020C204C0000002136
+:10099000020C205000000022020C20540000002312
+:1009A000020C205800000024020C205C00000025EE
+:1009B000020C206000000026020C206400000027CA
+:1009C000020C206800000028020C206C00000029A6
+:1009D000020C20700000002A020C20740000002B82
+:1009E000060C207800000056020C21D00000000107
+:1009F000020C21D400000001020C21D800000001EB
+:100A0000020C21DC00000001020C21E000000001CA
+:100A1000020C21E400000001020C21E800000001AA
+:100A2000020C21EC00000001020C21F0000000018A
+:100A3000020C21F400000001060C21F80000001057
+:100A4000020C223807FFFFFF020C223C0000003F8F
+:100A5000020C224007FFFFFF020C22440000000F9F
+:100A6000010C224800000000010C224C0000000094
+:100A7000010C225000000000010C22540000000074
+:100A8000010C225800000000010C225C0000000054
+:100A9000010C226000000000010C22640000000034
+:100AA000010C226800000000010C226C0000000014
+:100AB000010C227000000000010C227400000000F4
+:100AC000010C227800000000010C227C00000000D4
+:100AD000020C24BC000000010C0C2000000003E804
+:100AE0000A0C2000000000010B0C20000000000A8E
+:100AF000020C400800000365020C400C0000035487
+:100B0000020C401000000358020C40140000037552
+:100B1000020C401C0000FFFF020C40200000FFFF01
+:100B2000020C40240000FFFF020C40280000FFFFE1
+:100B3000020C403800000046020C403C000000055A
+:100B4000060C40400000005E020C41B800000001AD
+:100B5000060C41BC0000001F020C423807FFFFFFDB
+:100B6000020C423C0000003F020C424007FFFFFF26
+:100B7000020C42440000000F010C4248000000003B
+:100B8000010C424C00000000010C4250000000002B
+:100B9000010C425400000000010C4258000000000B
+:100BA000010C425C00000000010C426000000000EB
+:100BB000010C426400000000010C426800000000CB
+:100BC000010C426C00000000010C427000000000AB
+:100BD000010C427400000000010C4278000000008B
+:100BE000010C427C00000000010C4280000000006B
+:100BF000020C44C0000000010C0C4000000003E89F
+:100C00000A0C4000000000010B0C40000000000A2C
+:100C1000020D004400000032020D008C021500207D
+:100C2000020D009002150020020D00940810000033
+:100C3000020D009800000033020D009C000000022D
+:100C4000020D00A000000000020D00A4000000053D
+:100C5000020D00A800000005060D00AC0000000217
+:100C6000020D00B400000002020D00B800000003F5
+:100C7000020D00BC00000002020D00C000000001D7
+:100C8000020D00C800000002020D00CC00000002AE
+:100C9000020D010800000001020D015C00000001CE
+:100CA000020D016400000001020D01680000000255
+:100CB000020D020400000001020D020C00000020E1
+:100CC000020D021000000040020D0214000000405E
+:100CD000020D022000000003020D02240000001893
+:100CE000060D028000000012040D030000240243E0
+:100CF000020D004C00000001020D00500000000237
+:100D0000020D005400000008020D00580000000809
+:100D1000060D005C00000004020D00C40000000489
+:100D2000020D011400000009020D01180000002945
+:100D3000020D011C0000000A020D01200000002A23
+:100D4000020D012400000007020D01280000002709
+:100D5000020D012C00000007020D013000000027E9
+:100D6000020D01340000000C020D01380000002CBF
+:100D7000020D013C0000000C020D01400000002C9F
+:100D8000020D01440000000C020D01480000002C7F
+:100D9000020D000400000001020D00080000000127
+:100DA000020D000C00000001020D00100000000107
+:100DB000020D001400000001020D001800000001E7
+:100DC000020D001C00000001020D002000000001C7
+:100DD000020D002400000001020D002800000001A7
+:100DE000020D002C00000001020D00300000000187
+:100DF000020D003400000001020D00380000000167
+:100E0000020D003C00000001020E004C0000003208
+:100E1000020E009402150020020E00980215002018
+:100E2000020E009C00000030020E00A0081000001E
+:100E3000020E00A400000033020E00A800000030E3
+:100E4000020E00AC00000031020E00B000000002F3
+:100E5000020E00B400000004020E00B80000000002
+:100E6000020E00BC00000002020E00C000000002E2
+:100E7000020E00C400000000020E00C800000002C4
+:100E8000020E00CC00000007020E00D0000000029D
+:100E9000020E00D400000002020E00D80000000183
+:100EA000020E00E400000001020E014400000001F7
+:100EB000020E014C00000001020E01500000000271
+:100EC000020E020400000001020E020C00000040AD
+:100ED000020E021000000040020E021C000000047E
+:100EE000020E022000000020020E02240000000E6C
+:100EF000020E02280000001B060E03000000001274
+:100F0000040E0280001B0267020E00540000000C59
+:100F1000020E005800000009020E005C0000000FE5
+:100F2000020E006000000010060E006400000004C5
+:100F3000020E00DC00000003020E01100000000F92
+:100F4000020E01140000002F020E01180000000E16
+:100F5000020E011C0000002E020E00040000000121
+:100F6000020E000800000001020E000C000000014B
+:100F7000020E001000000001020E0014000000012B
+:100F8000020E001800000001020E001C000000010B
+:100F9000020E002000000001020E002400000001EB
+:100FA000020E002800000001020E002C00000001CB
+:100FB000020E003000000001020E003400000001AB
+:100FC000020E003800000001020E003C000000018B
+:100FD000020E004000000001020E0044000000016B
+:100FE0000730040000CA00000830076800130282BE
+:100FF00007340000336100000734800037270CD924
+:10100000073500002F111AA30835708051F00284B3
+:10101000013000000000000001300004000000006A
+:1010200001300008000000000130000C000000004A
+:10103000013000100000000001300014000000002A
+:1010400002300020000000010230002400000002F5
+:1010500002300028000000030230002C00000000D5
+:1010600002300030000000040230003400000001B3
+:1010700002300038000000000230003C0000000197
+:101080000230004000000004023000440000000074
+:1010900002300048000000010230004C0000000354
+:1010A0000230005000000000023000540000000137
+:1010B00002300058000000040230005C0000000014
+:1010C00002300060000000010230006400000003F4
+:1010D00002300068000000000230006C00000001D7
+:1010E00002300070000000040230007400000000B4
+:1010F00002300078000000040230007C0000000391
+:101100000630008000000002023000A400003FFF13
+:10111000023000A8000003FF02300224000000009B
+:1011200002300234000000000230024C00000000D7
+:10113000023002E40000FFFF06302000000008003B
+:1011400002338BC000000001023380000000001A4F
+:10115000023380400000004E023380800000001007
+:10116000023380C0000000200C3383000007A12060
+:101170000A338300000001380B338300000013881A
+:10118000023383C0000001F40C3383801DCD650061
+:101190000A3383800004C4B40B338380004C4B407B
+:1011A00006321AA0000000C206321020000000C85B
+:1011B0000632100000000002063214000000004059
+:1011C00006325098000000040632508000000005EE
+:1011D00004325094000102860632500000000020C4
+:1011E00004322830000202870233080001000000A8
+:1011F00004330C00001002890233080000000000D4
+:1012000004330C400010029906321500000000B4AF
+:1012100002321DC80000000006324000000000D865
+:10122000063217D0000000B402321DCC00000000CE
+:1012300006324360000000D807200400009200003E
+:1012400008200780001002A9072400002CD100000C
+:10125000072480002AE50B350824DC6062DA02AB43
+:101260000120000000000000012000040000000038
+:1012700001200008000000000120000C0000000018
+:1012800001200010000000000120001400000000F8
+:1012900002200020000000010220002400000002C3
+:1012A00002200028000000030220002C00000000A3
+:1012B0000220003000000004022000340000000181
+:1012C00002200038000000000220003C0000000165
+:1012D0000220004000000004022000440000000042
+:1012E00002200048000000010220004C0000000322
+:1012F0000220005000000000022000540000000105
+:1013000002200058000000040220005C00000000E1
+:1013100002200060000000010220006400000003C1
+:1013200002200068000000000220006C00000001A4
+:101330000220007000000004022000740000000081
+:1013400002200078000000040220007C000000035E
+:101350000620008000000002022000A400003FFFE1
+:10136000022000A8000003FF022002240000000069
+:1013700002200234000000000220024C00000000A5
+:10138000022002E40000FFFF062020000000080009
+:1013900002238BC000000001022380000000001027
+:1013A00002238040000000120223808000000030F1
+:1013B000022380C00000000E022383C0000001F45D
+:1013C000062250000000004206221020000000C843
+:1013D000062210000000000206222000000000C0CB
+:1013E000062225C00000024004222EC8000802ADDB
+:1013F00002230800013FFFFF04230C00001002B588
+:10140000022308000000000004230C40001002C565
+:1014100006223040000000A00622354000000010E7
+:10142000062236C000000030062240000000020004
+:10143000062235C00000002006223840000000309F
+:1014400006223000000000080222511800000000AF
+:10145000062223000000000E0622241000000030A7
+:10146000062232C0000000A00622358000000010D5
+:1014700006223780000000300622480000000200EB
+:10148000062236400000002006223900000000300D
+:1014900006223020000000080222511C000000003B
+:1014A000062223380000000E062224D0000000305F
+:1014B00002161000000000280217000800000002B9
+:1014C0000217002C000000030217003C000000047B
+:1014D0000217004400000008021700480000000244
+:1014E0000217004C0000009002170050000000900E
+:1014F00002170054008000900217005808140000E2
+:10150000021700600000008A0217006400000080DB
+:1015100002170068000000810217006C00000080C4
+:10152000021700700000000602170078000007D0C4
+:101530000217007C0000076C02170038007C1004C2
+:10154000021700040000000F0616402400000002ED
+:10155000021640700000001C021642080000000144
+:101560000216421000000001021642200000000195
+:10157000021642280000000102164230000000015D
+:10158000021642380000000102164260000000010D
+:101590000C16401C0003D0900A16401C0000009C52
+:1015A0000B16401C000009C4021640300000000861
+:1015B000021640340000000C0216403800000010F3
+:1015C0000216404400000020021640000000000106
+:1015D000021640D800000001021640080000000179
+:1015E0000216400C0000000102164010000000012D
+:1015F00002164240000000000216424800000000AF
+:101600000616427000000002021642500000000060
+:101610000216425800000000061642800000000238
+:1016200002166008000006140216600C0000060096
+:1016300002166010000006040216601C0000FFFF86
+:10164000021660200000FFFF021660240000FFFF6A
+:10165000021660280000FFFF02166038000000201C
+:101660000216603C000000200216604000000034BA
+:101670000216604400000035021660480000002396
+:101680000216604C00000024021660500000002585
+:101690000216605400000026021660580000002761
+:1016A0000216605C00000029021660600000002A3B
+:1016B000021660640000002B021660680000002C17
+:1016C0000216606C0000002D0616607000000052CB
+:1016D000021661B800000001061661BC0000001F80
+:1016E0000216623807FFFFFF0216623C0000003F4F
+:1016F0000216624007FFFFFF021662440000000F5F
+:1017000001166248000000000116624C0000000053
+:101710000116625000000000011662540000000033
+:1017200001166258000000000116625C0000000013
+:1017300001166260000000000116626400000000F3
+:1017400001166268000000000116626C00000000D3
+:1017500001166270000000000116627400000000B3
+:1017600001166278000000000116627C0000000093
+:10177000021664BC000000010C166000000003E8C3
+:101780000A166000000000010B1660000000000A4D
+:10179000021680400000000602168044000000058A
+:1017A000021680480000000A0216804C0000000566
+:1017B0000216805400000002021680CC00000004D3
+:1017C000021680D000000004021680D4000000043D
+:1017D000021680D800000004021680DC000000041D
+:1017E000021680E000000004021680E400000004FD
+:1017F000021680E8000000040216880400000004BD
+:10180000021680300000007C021680340000003D8B
+:10181000021680380000003F0216803C0000009C49
+:10182000021680F000000007061680F40000000594
+:101830000216880C01010101021681080000000057
+:101840000216810C00000004021681100000000442
+:1018500002168114000000020216881008012004FC
+:1018600002168118000000050216811C0000000508
+:1018700002168120000000050216812400000005E8
+:101880000216882C2008100102168128000000088A
+:101890000216812C000000060216813000000007AD
+:1018A0000216813400000000021688300101012078
+:1018B0000616813800000004021688340101010177
+:1018C0000616814800000004021688380101010153
+:1018D00006168158000000040216883C010101012F
+:1018E00006168168000000030216817400000001E2
+:1018F00002168840010101010216817800000001F2
+:101900000216817C000000010216818000000001A7
+:1019100002168184000000010216884401010101C1
+:1019200002168188000000010216818C000000046C
+:10193000021681900000000402168194000000024B
+:10194000021688480801200402168198000000054C
+:101950000216819C00000005021681A0000000050F
+:10196000021681A400000005021688142008100148
+:10197000021681A800000008021681AC00000006D3
+:10198000021681B000000007021681B400000001B9
+:101990000216881801010120021681B8000000011A
+:1019A000021681BC00000001021681C00000000187
+:1019B000021681C4000000010216881C0101010109
+:1019C000021681C800000001021681CC000000014F
+:1019D000021681D000000001021681D4000000012F
+:1019E0000216882001010101021681D800000001C1
+:1019F000021681DC00000001021681E000000001F7
+:101A0000021681E400000001021688240101010190
+:101A1000021681E800000001021681EC00000001BE
+:101A2000021681F000000001021688280101010160
+:101A300002168240FFFF003F0616824400000002AB
+:101A40000216824CFFFF003F021682500000010088
+:101A5000021682540000010006168258000000029F
+:101A600002168260000000C002168264000000C0FE
+:101A70000216826800001E000216826C00001E0022
+:101A800002168270000040000216827400004000BE
+:101A900002168278000080000216827C000080001E
+:101AA00002168280000020000216828400002000BE
+:101AB0000616828800000007021682A400000001BA
+:101AC000061682A80000000A021681F400000C0825
+:101AD000021681F800000040021681FC000001009F
+:101AE0000216820000000020021682040000001787
+:101AF00002168208000000800216820C000002001C
+:101B0000021682100000000002168218FFFF01FF7B
+:101B100002168214FFFF01FF0216823C0000001330
+:101B2000021680900000013F021680600000014014
+:101B30000216806400000140061680680000000262
+:101B400002168070000000C00616807400000007B6
+:101B50000216809C00000048021680A00000004889
+:101B6000061680A400000002021680AC00000048A7
+:101B7000061680B0000000070216823800008000C0
+:101B800002168234000025E40216809400007FFFD4
+:101B900002168220000000070216821C00000007C7
+:101BA000021682280000000002168224FFFFFFFFB9
+:101BB00002168230000000000216822CFFFFFFFF99
+:101BC000021680EC000000FF02140000000000017B
+:101BD0000214000C0000000102140040000000018B
+:101BE0000214004400007FFF0214000C00000000FB
+:101BF00002140000000000000214006C000000004D
+:101C00000214000400000001021400300000000172
+:101C100002140004000000000214005C0000000038
+:101C2000021400080000000102140034000000014A
+:101C30000214000800000000021400600000000010
+:101C40000202005800000032020200A0031500202A
+:101C5000020200A403150020020200A801000030C7
+:101C6000020200AC08100000020200B000000033C5
+:101C7000020200B400000030020200B8000000318F
+:101C8000020200BC00000003020200C000000006C7
+:101C9000020200C400000003020200C800000003AA
+:101CA000020200CC00000002020200D0000000008E
+:101CB000020200D400000002020200DC000000006A
+:101CC000020200E000000006020200E4000000043E
+:101CD000020200E800000002020200EC0000000224
+:101CE000020200F000000001020200FC00000006F9
+:101CF0000202012000000000020201340000000284
+:101D0000020201B0000000010202020C000000010A
+:101D10000202021400000001020202180000000288
+:101D200002020404000000010202040C0000004052
+:101D300002020410000000400202041C0000000423
+:101D4000020204200000002002020424000000021D
+:101D5000020204280000001F060205000000001215
+:101D600004020480001F02D5020200600000000F80
+:101D70000202006400000007020200680000000B7D
+:101D80000202006C0000000E060200700000000459
+:101D9000020200F40000000402020004000000013E
+:101DA00002020008000000010202000C0000000115
+:101DB00002020010000000010202001400000001F5
+:101DC00002020018000000010202001C00000001D5
+:101DD00002020020000000010202002400000001B5
+:101DE00002020028000000010202002C0000000195
+:101DF0000202003000000001020200340000000175
+:101E000002020038000000010202003C0000000154
+:101E10000202004000000001020200440000000134
+:101E200002020048000000010202004C0000000114
+:101E3000020200500000000102020108000000C878
+:101E40000202011800000002020201C400000000AA
+:101E5000020201CC00000000020201D400000002D6
+:101E6000020201DC00000002020201E4000000FFA7
+:101E7000020201EC000000FF0202010C000000C899
+:101E80000202011C00000002020201C80000000062
+:101E9000020201D000000000020201D8000000028E
+:101EA000020201E000000002020201E8000000FF5F
+:101EB000020201F0000000FF0728040000B5000046
+:101EC00008280768001302F4072C000035D300002F
+:101ED000072C80003A3E0D75072D00003B541C0571
+:101EE000072D800022BC2ADB082DC770471202F69E
+:101EF000012800000000000001280004000000008C
+:101F000001280008000000000128000C000000006B
+:101F1000012800100000000001280014000000004B
+:101F20000228002000000001022800240000000216
+:101F300002280028000000030228002C00000000F6
+:101F400002280030000000040228003400000001D4
+:101F500002280038000000000228003C00000001B8
+:101F60000228004000000004022800440000000095
+:101F700002280048000000010228004C0000000375
+:101F80000228005000000000022800540000000158
+:101F900002280058000000040228005C0000000035
+:101FA0000228006000000001022800640000000315
+:101FB00002280068000000000228006C00000001F8
+:101FC00002280070000000040228007400000000D5
+:101FD00002280078000000040228007C00000003B2
+:101FE0000628008000000002022800A400003FFF35
+:101FF000022800A8000003FF0228022400000000BD
+:1020000002280234000000000228024C00000000F8
+:10201000022802E40000FFFF06282000000008005C
+:10202000022B8BC000000001022B8000000000008A
+:10203000022B804000000018022B80800000000C62
+:10204000022B80C0000000660C2B83000007A1203B
+:102050000A2B8300000001380B2B8300000013883B
+:10206000022B83C0000001F40C2B8340000001F41C
+:102070000A2B8340000000000B2B8340000000056A
+:102080000A2B83800004C4B40C2B83801DCD650013
+:102090000B2B8380004C4B40062A3C400000000480
+:1020A000042A3C50000202F8062A300000000048D2
+:1020B000062A1020000000C8062A100000000002B6
+:1020C000062A31280000008E022A33680000000032
+:1020D000042A3370000202FA042A3A70000402FC57
+:1020E000042A3D0000020300042A15000002030236
+:1020F000062A150800000100022A197000000000DD
+:10210000022A197800000000042A19600002030462
+:10211000062A4AC000000002062A4B000000000404
+:10212000042A1F4800020306022B080000000000DA
+:10213000042B0C0000100308022B08000100000013
+:10214000042B0C4000080318022B080002000000BA
+:10215000042B0C6000080320062A3A8000000014BB
+:10216000062A3B2000000024062A14000000000A72
+:10217000062A145000000006062A3378000000D812
+:10218000022A3A3800000000042A3C5800020328C2
+:10219000042A3C680010032A062A5020000000028E
+:1021A000062A503000000002062A500000000002FB
+:1021B000062A501000000002022A504000000000D1
+:1021C000062A50480000000E022A50B80000000104
+:1021D000042A4AC80002033A062A4B1000000042B3
+:1021E000062A4D2000000004062A3AD00000001400
+:1021F000062A3BB000000024062A14280000000A2A
+:10220000062A146800000006062A36D8000000D806
+:10221000022A3A3C00000000042A3C600002033C11
+:10222000042A3CA80010033E062A502800000002A1
+:10223000062A503800000002062A5008000000025A
+:10224000062A501800000002022A50440000000034
+:10225000062A50800000000E022A50BC0000000137
+:10226000042A4AD00002034E062A4C1800000042FD
+:10227000062A4D3000000004021010080000000182
+:102280000210101000000264021010000003D000C1
+:10229000021010040000003D091018000200035055
+:1022A00009101100002005500610118000000002E6
+:1022B0000910118800060570061011A00000001812
+:1022C000021010100000000006102400000000E0C2
+:1022D0000210201C0000000002102020000000015D
+:1022E000021020C0000000010210200400000001C4
+:1022F000021020080000000109103C0000050576CE
+:1023000009103C200005057B0910380000050580F8
+:1023100002104028000000100210404400003FFF5F
+:102320000210405800280000021040840084924AA5
+:1023300002104058000000000610806800000004F1
+:1023400002108000000010800610802800000002AB
+:102350000210803800000010021080400000FFFFD3
+:10236000021080440000FFFF0210805000000000B7
+:102370000210810000000000061081200000000211
+:1023800002108008000002B502108010000000005A
+:10239000061082000000004A021081080001FFFFC1
+:1023A00006108140000000020210800000001A8028
+:1023B0000610900000000024061091200000004A42
+:1023C000061093700000004A061095C00000004AF5
+:1023D000021080040000108006108030000000020F
+:1023E0000210803C00000010021080480000FFFF37
+:1023F0000210804C0000FFFF02108054000000001B
+:102400000210810400000000061081280000000274
+:102410000210800C000002B50210801400000000C1
+:10242000061084000000004A0210810C0001FFFF2A
+:1024300006108148000000020210800400001A808B
+:102440000610909000000024061092480000004AF8
+:10245000061094980000004A061096E80000004A12
+:102460000212049000E383400212051400003C10A5
+:10247000021205200000000202120494FFFFFFFF79
+:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
+:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
+:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
+:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
+:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
+:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
+:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
+:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
+:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
+:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
+:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
+:10253000021204FCFFFFFFFF02120500FFFFFFFF76
+:1025400002120504FFFFFFFF02120508FFFFFFFF55
+:102550000212050CFFFFFFFF02120510FFFFFFFF35
+:10256000021204D4FFFF3330021204D8FFFF3340BD
+:10257000021204B4F00030000212039000000008C0
+:102580000212039C00000008061203A000000002D3
+:10259000021203BC00000004021203C40000000485
+:1025A000021203D000000000021203DC0000000051
+:1025B0000212036C00000001021203680000003FD9
+:1025C000021201BC00000040021201C00000180805
+:1025D000021201C400000803021201C8000008032F
+:1025E000021201CC00000040021201D000000003E2
+:1025F000021201D400000803021201D800000803EF
+:10260000021201DC00000803021201E000010003D5
+:10261000021201E400000803021201E800000803AE
+:10262000021201EC00000003021201F0000000039E
+:10263000021201F400000003021201F8000000037E
+:10264000021201FC0000000302120200000000035D
+:10265000021202040000000302120208000000033C
+:102660000212020C0000000302120210000000031C
+:1026700002120214000000030212021800000003FC
+:102680000212021C000000030212022000000003DC
+:102690000212022400000003021202280000240398
+:1026A0000212022C0000002F02120230000000096A
+:1026B00002120234000000190212023800000184E4
+:1026C0000212023C000001830212024000000306D5
+:1026D0000212024400000019021202480000000623
+:1026E0000212024C00000306021202500000030610
+:1026F00002120254000003060212025800000C8667
+:102700000212025C000003060212026000000306CF
+:1027100002120264000000060212026800000006B5
+:102720000212026C00000006021202700000000695
+:102730000212027400000006021202780000000675
+:102740000212027C00000006021202800000000655
+:102750000212028400000006021202880000000635
+:102760000212028C00000006021202900000000615
+:1027700002120294000000060212029800000006F5
+:102780000212029C00000006021202A000000306D2
+:10279000021202A400000013021202A800000006A8
+:1027A000021202B000001004021202B40000100471
+:1027B0000212032400106440021203280010644037
+:1027C000021201B0000000010600A0000000001687
+:1027D0000200A06CBF5C00000200A070FFF51FEFBC
+:1027E0000200A0740000FFFF0200A078500003E088
+:1027F0000200A07C000000000200A0800000A000F9
+:102800000600A084000000050200A0980FE0000070
+:102810000600A09C000000140200A0EC555400002B
+:102820000200A0F0555555550200A0F40000555582
+:102830000200A0F8000000000200A0FC55540000B7
+:102840000200A100555555550200A1040000555540
+:102850000200A108000000000200A22C00000000FD
+:102860000600A230000000030200A0600000000784
+:102870000200A10CBF5C00000200A110FFF51FEFD9
+:102880000200A1140000FFFF0200A118500003E0A5
+:102890000200A11C000000000200A1200000A00016
+:1028A0000600A124000000050200A1380FE000008E
+:1028B0000600A13C000000140200A18C5554000049
+:1028C0000200A190555555550200A19400005555A0
+:1028D0000200A198000000000200A19C55540000D5
+:1028E0000200A1A0555555550200A1A40000555560
+:1028F0000200A1A8000000000200A23C00000000AD
+:102900000600A240000000030200A06400000007CF
+:1029100000000000000000000000002E0000000089
+:1029200000000000000000000000000000000000A7
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000000000087
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:10297000002E0050000000000000000000000000D9
+:102980000000000000000000000000000000000047
+:102990000000000000000000000000000050008D5A
+:1029A0000000000000000000000000000000000027
+:1029B0000000000000000000000000000000000017
+:1029C0000000000000000000008D009200920096C0
+:1029D0000096009A000000000000000000000000C7
+:1029E00000000000000000000000000000000000E7
+:1029F00000000000009A00DB00DB00E900E900F7BE
+:102A000000000000000000000000000000000000C6
+:102A100000000000000000000000000000000000B6
+:102A200000000000000000000000000000000000A6
+:102A30000000000000000000000000000000000096
+:102A40000000000000000000000000000000000086
+:102A50000000000000000000000000000000000076
+:102A60000000000000000000000000000000000066
+:102A70000000000000000000000000000000000056
+:102A80000000000000000000000000000000000046
+:102A90000000000000000000000000000000000036
+:102AA0000000000000000000000000000000000026
+:102AB0000000000000000000000000000000000016
+:102AC0000000000000000000000000000000000006
+:102AD00000F700FE00000000000000000000000001
+:102AE00000000000000000000000000000000000E6
+:102AF00000000000000000000000000000000000D6
+:102B000000000000000000000000000000000000C5
+:102B100000000000000000000000000000000000B5
+:102B2000000000000000000000FE01030103010E90
+:102B3000010E01190000000000000000000000006C
+:102B40000000000000000000000000000000000085
+:102B50000000000000000000000000000000000075
+:102B60000000000000000000000000000000000065
+:102B70000000000000000000000000000000000055
+:102B80000119011A00000000000000000000000010
+:102B90000000000000000000000000000000000035
+:102BA000000000000000000000000000011A0152B7
+:102BB0000000000000000000000000000000000015
+:102BC0000000000000000000000000000000000005
+:102BD000000000000000000001520176000000002B
+:102BE00000000000000000000000000000000000E5
+:102BF00000000000000000000000000000000000D5
+:102C000000000000017601B5000000000000000097
+:102C100000000000000000000000000000000000B4
+:102C200000000000000000000000000000000000A4
+:102C300001B501F0000000000000000000000000ED
+:102C40000000000000000000000000000000000084
+:102C500000000000000000000000000001F002354C
+:102C6000023502380238023B00000000000000007C
+:102C70000000000000000000000000000000000054
+:102C80000000000000000000023B02760276028095
+:102C90000280028A00000000000000000000000026
+:102CA0000000000000000000000000000000000024
+:102CB00000000000028A028B0000000000000000FB
+:102CC0000000000000000000000000000000000004
+:102CD00000000000000000000000000000000000F4
+:102CE000028B029D000000000000000000000000B8
+:102CF00000000000000000000000000000000000D4
+:102D0000000000000000000000000000029D02B270
+:102D100002B202B502B502B80000000000000000D7
+:102D200000000000000000000000000000000000A3
+:102D3000000000000000000002B802E600000000F1
+:102D40000000000000000000000000000000000083
+:102D50000000000000000000000000000000000073
+:102D60000000000002E6036D00000000000000000B
+:102D70000000000000000000000000000000000053
+:102D80000000000000000000000000000000000043
+:102D9000036D0374037403780378037C0000000060
+:102DA0000000000000000000000000000000000023
+:102DB000000000000000000000000000037C03BBD6
+:102DC00003BB03C303C303CB0000000000000000EB
+:102DD00000000000000000000000000000000000F3
+:102DE000000000000000000003CB041F041F04319A
+:102DF0000431044300000000000000000000000057
+:102E000000000000000000000000000000000000C2
+:102E1000000000000443044D00000000000000001A
+:102E200000000000000000000000000000000000A2
+:102E30000000000000000000000000000000000092
+:102E4000044D0453000000000000000000000000DA
+:102E50000000000000000000000000000000000072
+:102E600000000000000000000000000004530456B1
+:102E70000000000000000000000000000000000052
+:102E80000000000000000000000000000000000042
+:102E900000000000000000000456045B0000000079
+:102EA0000000000000000000000000000000000022
+:102EB0000000000000000000000000000000000012
+:102EC00000000000045B045C045C046E046E04807B
+:102ED00000000000000000000000000000000000F2
+:102EE00000000000000000000000000000000000E2
+:102EF000048004ED0000000000000000000000005D
+:102F000000000000000000000000000000000000C1
+:102F100000000000000000000000000004ED04EECE
+:102F200004EE050205020516000000000000000086
+:102F30000000000000000000000000000000000091
+:102F40000000000000000000000000000000000081
+:102F50000000000000000000000000000000000071
+:102F60000000000000000000000000000000000061
+:102F70000000000000000000000000000000000051
+:102F80000000000000000000000000000000000041
+:102F90000000000000000000000000000000000031
+:102FA000000000000000000000010000000204C05A
+:102FB0000003098000040E4000051300000617C03E
+:102FC00000071C800008214000092600000A2AC0D2
+:102FD000000B2F80000C3440000D3900000E3DC066
+:102FE000000F42800010474000114C00001250C0FA
+:102FF0000013558000145A4000155F00001663C08E
+:103000000017688000186D4000197200001A76C021
+:10301000001B7B80001C8040001D8500001E89C0B5
+:10302000001F8E8000209340000020000000400020
+:1030300000006000000080000000A0000000C00050
+:103040000000E0000001000000012000000140003D
+:1030500000016000000180000001A0000001C0002C
+:103060000001E00000020000000220000002400019
+:1030700000026000000280000002A0000002C00008
+:103080000002E000000300000003200000034000F5
+:1030900000036000000380000003A0000003C000E4
+:1030A0000003E000000400000004200000044000D1
+:1030B00000046000000480000004A0000004C000C0
+:1030C0000004E000000500000005200000054000AD
+:1030D00000056000000580000005A0000005C0009C
+:1030E0000005E00000060000000620000006400089
+:1030F00000066000000680000006A0000006C00078
+:103100000006E00000070000000720000007400064
+:1031100000076000000780000007A0000007C00053
+:103120000007E00000080000000820000008400040
+:1031300000086000000880000008A0000008C0002F
+:103140000008E0000009000000092000000940001C
+:1031500000096000000980000009A0000009C0000B
+:103160000009E000000A0000000A2000000A4000F8
+:10317000000A6000000A8000000AA000000AC000E7
+:10318000000AE000000B0000000B2000000B4000D4
+:10319000000B6000000B8000000BA000000BC000C3
+:1031A000000BE000000C0000000C2000000C4000B0
+:1031B000000C6000000C8000000CA000000CC0009F
+:1031C000000CE000000D0000000D2000000D40008C
+:1031D000000D6000000D8000000DA000000DC0007B
+:1031E000000DE000000E0000000E2000000E400068
+:1031F000000E6000000E8000000EA000000EC00057
+:10320000000EE000000F0000000F2000000F400043
+:10321000000F6000000F8000000FA000000FC00032
+:10322000000FE0000010000000102000001040001F
+:1032300000106000001080000010A0000010C0000E
+:103240000010E000001100000011200000114000FB
+:1032500000116000001180000011A0000011C000EA
+:103260000011E000001200000012200000124000D7
+:1032700000126000001280000012A0000012C000C6
+:103280000012E000001300000013200000134000B3
+:1032900000136000001380000013A0000013C000A2
+:1032A0000013E0000014000000142000001440008F
+:1032B00000146000001480000014A0000014C0007E
+:1032C0000014E0000015000000152000001540006B
+:1032D00000156000001580000015A0000015C0005A
+:1032E0000015E00000160000001620000016400047
+:1032F00000166000001680000016A0000016C00036
+:103300000016E00000170000001720000017400022
+:1033100000176000001780000017A0000017C00011
+:103320000017E000001800000018200000184000FE
+:1033300000186000001880000018A0000018C000ED
+:103340000018E000001900000019200000194000DA
+:1033500000196000001980000019A0000019C000C9
+:103360000019E000001A0000001A2000001A4000B6
+:10337000001A6000001A8000001AA000001AC000A5
+:10338000001AE000001B0000001B2000001B400092
+:10339000001B6000001B8000001BA000001BC00081
+:1033A000001BE000001C0000001C2000001C40006E
+:1033B000001C6000001C8000001CA000001CC0005D
+:1033C000001CE000001D0000001D2000001D40004A
+:1033D000001D6000001D8000001DA000001DC00039
+:1033E000001DE000001E0000001E2000001E400026
+:1033F000001E6000001E8000001EA000001EC00015
+:10340000001EE000001F0000001F2000001F400001
+:10341000001F6000001F8000001FA000001FC000F0
+:10342000001FE000002000000020200000204000DD
+:1034300000206000002080000020A0000020C000CC
+:103440000020E000002100000021200000214000B9
+:1034500000216000002180000021A0000021C000A8
+:103460000021E00000220000002220000022400095
+:1034700000226000002280000022A0000022C00084
+:103480000022E00000230000002320000023400071
+:1034900000236000002380000023A0000023C00060
+:1034A0000023E0000024000000242000002440004D
+:1034B00000246000002480000024A0000024C0003C
+:1034C0000024E00000250000002520000025400029
+:1034D00000256000002580000025A0000025C00018
+:1034E0000025E00000260000002620000026400005
+:1034F00000266000002680000026A0000026C000F4
+:103500000026E000002700000027200000274000E0
+:1035100000276000002780000027A0000027C000CF
+:103520000027E000002800000028200000284000BC
+:1035300000286000002880000028A0000028C000AB
+:103540000028E00000290000002920000029400098
+:1035500000296000002980000029A0000029C00087
+:103560000029E000002A0000002A2000002A400074
+:10357000002A6000002A8000002AA000002AC00063
+:10358000002AE000002B0000002B2000002B400050
+:10359000002B6000002B8000002BA000002BC0003F
+:1035A000002BE000002C0000002C2000002C40002C
+:1035B000002C6000002C8000002CA000002CC0001B
+:1035C000002CE000002D0000002D2000002D400008
+:1035D000002D6000002D8000002DA000002DC000F7
+:1035E000002DE000002E0000002E2000002E4000E4
+:1035F000002E6000002E8000002EA000002EC000D3
+:10360000002EE000002F0000002F2000002F4000BF
+:10361000002F6000002F8000002FA000002FC000AE
+:10362000002FE0000030000000302000003040009B
+:1036300000306000003080000030A0000030C0008A
+:103640000030E00000310000003120000031400077
+:1036500000316000003180000031A0000031C00066
+:103660000031E00000320000003220000032400053
+:1036700000326000003280000032A0000032C00042
+:103680000032E0000033000000332000003340002F
+:1036900000336000003380000033A0000033C0001E
+:1036A0000033E0000034000000342000003440000B
+:1036B00000346000003480000034A0000034C000FA
+:1036C0000034E000003500000035200000354000E7
+:1036D00000356000003580000035A0000035C000D6
+:1036E0000035E000003600000036200000364000C3
+:1036F00000366000003680000036A0000036C000B2
+:103700000036E0000037000000372000003740009E
+:1037100000376000003780000037A0000037C0008D
+:103720000037E0000038000000382000003840007A
+:1037300000386000003880000038A0000038C00069
+:103740000038E00000390000003920000039400056
+:1037500000396000003980000039A0000039C00045
+:103760000039E000003A0000003A2000003A400032
+:10377000003A6000003A8000003AA000003AC00021
+:10378000003AE000003B0000003B2000003B40000E
+:10379000003B6000003B8000003BA000003BC000FD
+:1037A000003BE000003C0000003C2000003C4000EA
+:1037B000003C6000003C8000003CA000003CC000D9
+:1037C000003CE000003D0000003D2000003D4000C6
+:1037D000003D6000003D8000003DA000003DC000B5
+:1037E000003DE000003E0000003E2000003E4000A2
+:1037F000003E6000003E8000003EA000003EC00091
+:10380000003EE000003F0000003F2000003F40007D
+:10381000003F6000003F8000003FA000003FC0006C
+:10382000003FE000003FE00100000000000001FF59
+:103830000000020000007FF800007FF80000026F27
+:1038400000001500000000010000000300BEBC20C5
+:103850000000000300BEBC2000000001FFFFFFFFCE
+:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:1038800000000000FFFFFFFF00000000FFFFFFFF40
+:103890000000000300BEBC20FFFFFFFF000000008F
+:1038A000FFFFFFFF00000000FFFFFFFF000000031D
+:1038B00000BEBC2000002000000040C0000061806D
+:1038C000000082400000A3000000C3C00000E480AC
+:1038D0000001054000012600000146C0000167808C
+:1038E000000188400001A9000001C9C00001EA8070
+:1038F00000020B4000022C0000024CC000026D8050
+:1039000000028E400002AF000002CFC00002F08033
+:103910000003114000033200000352C00003738013
+:10392000000394400003B5000003D5C00003F680F7
+:103930000004174000043800000458C000047980D7
+:1039400000049A400000800000010380000187000D
+:1039500000020A8000028E0000031180000395001F
+:103960000004188000049C0000051F800005A300CF
+:10397000000626800006AA0000072D800007B1007F
+:10398000000834800008B80000093B800009BF002F
+:10399000000A4280000AC600000B4980000BCD00DF
+:1039A000000C5080000CD400000D5780000DDB008F
+:1039B00000007FF800007FF800000174000015008F
+:1039C0000000190000000000FFFFFFFF40000000A2
+:1039D00040000000400000004000000040000000E7
+:1039E00040000000400000004000000040000000D7
+:1039F00040000000400000004000000040000000C7
+:103A000040000000400000004000000040000000B6
+:103A100040000000400000004000000040000000A6
+:103A20004000000040000000400000004000000096
+:103A30004000000040000000400000004000000086
+:103A400040000000400000004000000000007FF83F
+:103A500000007FF80000050900003500FFFFFFFFB0
+:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
+:103A80004000000040000000400000004000000036
+:103A90004000000040000000400000004000000026
+:103AA0004000000040000000400000004000000016
+:103AB0004000000040000000400000004000000006
+:103AC00040000000400000004000000040000000F6
+:103AD00040000000400000004000000040000000E6
+:103AE00040000000400000004000000040000000D6
+:103AF00040000000400000004000000000001000F6
+:103B000000002080000031000000418000005200D1
+:103B100000006280000073000000838000009400B9
+:103B20000000A4800000B5000000C5800000D600A1
+:103B30000000E6800000F700000107800001180087
+:103B400000012880000139000001498000015A006D
+:103B500000016A8000017B0000018B8000019C0055
+:103B60000001AC800001BD000001CD800001DE003D
+:103B70000001EE800001FF0000007FF800007FF8E8
+:103B8000000004480000150010000000000028ADEF
+:103B9000000000000001000100070205CCCCCCC1F0
+:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
+:103BB0000000000000000001CCCC0201CCCCCCCC39
+:103BC00000000000FFFFFFFF400000004000000079
+:103BD00040000000400000004000000040000000E5
+:103BE00040000000400000004000000040000000D5
+:103BF00040000000400000004000000040000000C5
+:103C000040000000400000004000000040000000B4
+:103C100040000000400000004000000040000000A4
+:103C20004000000040000000400000004000000094
+:103C30004000000040000000400000004000000084
+:103C40004000000040000000000E01B7011600D641
+:103C50000000FFFF000000000000FFFF0000000068
+:103C60000000FFFF000000000000FFFF0000000058
+:103C70000000FFFF000000000000FFFF0000000048
+:103C80000000FFFF000000000000FFFF0000000038
+:103C90000010000000000000007201BB012300F3CF
+:103CA0000000FFFF000000000000FFFF0000000018
+:103CB0000000FFFF000000000000FFFF0000000008
+:103CC0000000FFFF000000000000FFFF00000000F8
+:103CD0000000FFFF000000000000FFFF00000000E8
+:103CE0000010000000000000FFFFFFF3318FFFFF16
+:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
+:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
+:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
+:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
+:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
+:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
+:103D50000C30C305C30C30C3CF300014F3CF3CF399
+:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
+:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
+:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
+:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
+:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
+:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
+:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
+:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
+:103DE0000040CF3CCDCDCDCDFFFFFFF3318FFFFFA6
+:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
+:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
+:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
+:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
+:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
+:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
+:103E50000C30C305C30C30C3CF300014F3CF3CF398
+:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
+:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
+:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
+:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
+:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
+:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
+:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
+:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
+:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
+:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
+:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
+:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
+:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
+:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
+:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
+:103F50000C30C305C30C30C3CF300014F3CF3CF397
+:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
+:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
+:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
+:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
+:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
+:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
+:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
+:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
+:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
+:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
+:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
+:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
+:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
+:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
+:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
+:104050000C30C305C30C30C3CF300014F3CF3CF396
+:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
+:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
+:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
+:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
+:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
+:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
+:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
+:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
+:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
+:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
+:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
+:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
+:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
+:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
+:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
+:104150000C30C305C30C30C3CF300014F3CF3CF395
+:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
+:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
+:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
+:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
+:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
+:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
+:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
+:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
+:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
+:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
+:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
+:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
+:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
+:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
+:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
+:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
+:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
+:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
+:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
+:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
+:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
+:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
+:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
+:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
+:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
+:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
+:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
+:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
+:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
+:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
+:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
+:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
+:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
+:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
+:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
+:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
+:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
+:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
+:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
+:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
+:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
+:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
+:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
+:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
+:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
+:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
+:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
+:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
+:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
+:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
+:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
+:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
+:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
+:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
+:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
+:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
+:1044E0000040CF3CCDCDCDCD000C0000000700C07A
+:1044F00000028130000B81580002021000010230DE
+:10450000000F024000010330000C0000000800C052
+:1045100000028140000B816800020220000102407D
+:1045200000070250000202C0000F0000000800F067
+:1045300000028170000B819800020250000102709D
+:10454000000B828000080338001000000008010002
+:1045500000028180000B81A80002026000018280BD
+:10456000000E82980008038000028000000B802863
+:10457000000200E0000101000000811000000118AD
+:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
+:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
+:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
+:1045B000CCCCCCCCCCCCCCCC00002000000000007B
+:1045C0001F8B080000000000000BFB51CFC0F00360
+:1045D0008A7BD81818F67020F843015F646260B8CF
+:1045E0000CC45781588099812198918121849178B8
+:1045F000FD19A208F63B210606296106860841A09E
+:1046000079C208F1D3403576220C0C8C22107E2B17
+:1046100090E612A58EFB071AEF94C214DB26816088
+:10462000EFC2228F8C77A3C98B4AA2F2F710D03F3A
+:10463000D0F895222A5F5601429741C55FA3C9CBA6
+:1046400041E56F41FDF54611BBB9B7A1F2009CB43D
+:10465000B6A260030000000000000000000000009F
+:104660001F8B080000000000000BED7D0B7854D577
+:10467000B5F03E73CE9C9949662627214F1E6112E4
+:1046800020028638BC0228F73A212140A575A055A2
+:10469000D1A21D3040C85B8A5E5ADB2F130831025D
+:1046A000DAE08F8A16EDF0AAA8A80123450B7478EA
+:1046B0008A5E6F6FB06A69B5DE888A8A3C22AD4A2D
+:1046C000EF6D7FFFB5D6DE3B73CE6402D8AFF7FE49
+:1046D000F7BFDF1F3FBFC33E7B9FBDD75EAFBDD6D9
+:1046E000DA6BEFB1DB1C4CBF96B1AFF00F9EF53625
+:1046F000C65846ECF9A89D7D2FE866AC60BD6F8575
+:104700003B1DDEEFCEDB91EC632C67CF5A650ABC14
+:10471000CFD9D0A6CC2F8C7D1F7041E57878BF7B98
+:10472000AD5202EF735E6B53E6E1D361639DD09EA1
+:1047300069BE14864F16602C93B1211399F80BB8FB
+:10474000738A191B88FF842ECE1BC98C8D632C6F36
+:10475000A52D1256E07DA87226F332B619E0CA499B
+:1047600083EFD4BFECB763DB06ED44979331A7E644
+:10477000D4BECA672C770EB331780E5EC6DFE3DF96
+:1047800057F07F5ED85A1EC24CE53C2C7BD24FC2FC
+:1047900090CCC33C5FA989E0EDD683A362F394CFAC
+:1047A0000D8DBE4CB7D6FBBD7C2EB9E363FD1EF864
+:1047B000FA716C3794B1485CFBDAB0AEB1ABE0098A
+:1047C00008682FECFDFD4C56528C74B88D4DA167D6
+:1047D000BDE6BB09F1527FD4CEC200777DC3C9725A
+:1047E0002CB3DD0A1B96D7FBFB51CC4EF428618A13
+:1047F0007612E7EB655E9C9F5AE37BB81CF0DC9079
+:104800001C28C37E1F490ED153BECF9E3F3D3B04A3
+:10481000F0942E2A0C33A0FBF9F58ADF019F7FA4C8
+:1048200044743BD0A3FA3B0D45D3A0DD9B7AE83A14
+:10483000FC6E911A6DB1C3F8B5731B0A8002AC53BC
+:10484000E7FC337877C9271AD06D3063E19434A43C
+:104850000B63274C74C0BF13C34559ED1B8F977A68
+:1048600056603F1AF612A1F9CAF779E1A34386C64A
+:104870008DC78A091E867032D6A524A2EBE0174B9D
+:104880008E6A457D8FF79F3F8F309743C01DD2B70B
+:10489000D6A34796037E4B5FB047AF057AD46E54DC
+:1048A000220E28DBF6B902489FB35BA00C74897A0C
+:1048B000746A7FC67052B9DED179FF3550EE7E4101
+:1048C000659BB0DBE1493694BB930276360ECA8015
+:1048D0008F852E5EACDDB8FF36ECAF72B783B99032
+:1048E0009E2F2EFAD635505E04FC864D6AB736E907
+:1048F000FDA1BC38A2B463F9DC1446FC114ED323ED
+:104900005B61BC73DECECC1B405E4E353A990F40E6
+:1049100059E1E9CCFC0EF051556447397E57B55D3D
+:10492000F123DA4B5FD87A2407E7F524F015F0512C
+:10493000F5B664E693F883FF4FC254AE85FA25308E
+:104940004F94FF45ACAD9CA938FE5ADDE789E1EBF9
+:1049500054A341E3F4C8D393300E7C57F7ACE2C7BD
+:1049600029D6D95808E5EAEC8BAE399BDD38BF264D
+:10497000BDC083F3BA47C7768B22F376A1CAAA8A51
+:104980006CD4CBA1BE6AC3467D6121E20DF45E21E9
+:10499000C2D5CF0AD77A3580F85D92EADCA4027ED0
+:1049A000983B903D3B01FF9C6A043556102B57A164
+:1049B0007C933E89E8B34CEDCB9554E2D7EA6D2A5F
+:1049C000F359F889D33F7C8CD33FBCD713D99A17BE
+:1049D000A3DF1283EB4949BF25A9829E5A77712232
+:1049E00078EE477A003C6D882F78AE11F07927B3C6
+:1049F000120DE8E20D30436197E6CF363B9BC7606E
+:104A0000ECD7D982803609CA3ABB83F91933B4DAB4
+:104A1000401994FFC282AFE17C18F3FB8280E71655
+:104A200085CDC1791F4660613E2D393AE1AF6D6A8F
+:104A3000F166551130A76379E1CF57E5D1F76FD013
+:104A4000F71A7C3FAAEFEF8DF28996EF8DF24AF9C3
+:104A5000FD3BD88E392FFE7D5BF9D5D6F1CBABE48B
+:104A6000F71FD0F8EE8BC36F4C9B6C1D7F5A0D7DEA
+:104A70005FEFE0F4EA4E75463641B9D9E50F684874
+:104A8000378D45F1BD9656B009DBA9921F58674096
+:104A900085EFDDDB53C7AC6266BE98F2271CCF03FF
+:104AA000D262E68B948949167E4C0DA459CAD093E4
+:104AB00071F2CA981E0A789D048FDE5F277D51D25D
+:104AC000DF49F0DEB5CF45E5BBAEE6F0DED5DF4D24
+:104AD000728630B01C28EBA1AB0CD37A04702A2C60
+:104AE0009BB1CF95904B196F7EEFB3E1FB249535C9
+:104AF000E07C921C8CF4D13D79C59BC326FCB40E9E
+:104B000002FA42395DD1391E055EEF19B4307B9E41
+:104B1000699C9641FA9C4D85FCFDED6E1C2F98A971
+:104B2000A01ED4BB0B0C77EF711CF9132DE3387367
+:104B30002B699CBCB8711CB99571E338E76C12EF16
+:104B4000C538432E36CE3DF9575BE7935B45E314FA
+:104B5000C5CF27B72A6E9C243E1F782FC6F123FEAF
+:104B6000FA9CCF90C9D6F90CAEA171AEC171C69BAB
+:104B7000E633B8266E1C378D83EF711C30A47C2C75
+:104B80000BE8EEE85E48F4FF958BEC05DD117A0248
+:104B9000FB656FBB18E9131F8C9B857A0516679020
+:104BA0005F4D49A371BE4802FABBCD74E6FA889EF8
+:104BB000A07F16081059042002FD532778B462FB29
+:104BC000ACDC267CEE2ECD9E8776C93A8F7F188886
+:104BD000CED9DDA5FAED09EC9B056DF6935D16FEC9
+:104BE000157A6F0A1BDE00E377A0B231954F82FE83
+:104BF00062A0B74E80FEC2E747C23EFD00F41BD361
+:104C0000CDF036D13C4E6A1C8F2737F075E48BB55A
+:104C1000C7EC60ECE1306F1402DC378A692C680362
+:104C2000E3CF2467F5821EDD2F3A229B881E810187
+:104C300036E073B6BE1FE04AB4033BF30FC21E85D5
+:104C4000BF0136B0656F69DD71189BBDA5CC1BB483
+:104C500004E63BA763AD7D0094CFDABB6EF3BB4D9A
+:104C6000FDCCB19FC0793BE13FECE7E690DD629F70
+:104C70007EB7D25ABE35CE5EAD51F2053DC4B8BE48
+:104C8000881DE975632687E7567C8EC16A83E875BF
+:104C90009BC1BF95F0D4DF6D67515A8FBA3258214E
+:104CA000E22383ECA2905C57E2E0BBCDEE0C0481E2
+:104CB0009EB7FD40253CC6C3DBB52F3960037BA9F9
+:104CC0006BFD1FED687F5F0AFEEF2DB3D6B3301F7B
+:104CD0004FE255F2C14D734AFA7D606A77736846B8
+:104CE000BF0F4CFCF2DDCA5996F2AD0D375BDA7F8F
+:104CF0006FD93C4BFDBCF0624BFDEDAD7758CA0B54
+:104D0000DA7E6069BF687D93A57E71E45E4B7DF5B8
+:104D1000B6B596726DFB2396F6F5BB375AEA6DFB76
+:104D2000465C8FF2B8E24D95A17DF6B9FBE4FD68D3
+:104D30005F7D6E687E6C5387BC0672F8716336F1D6
+:104D4000F7A9461F3DCFEE1EEB447BBC3E09E4199C
+:104D5000D6FA7DCA1FC2AD93518F407BD0E1079434
+:104D6000F7C361709E5E517CC4F7EA7A9D45815518
+:104D70001596D6C3D7DD6AAC5EEB82FAB17DD7ABB0
+:104D8000EBB584F55A9796B0DF734A7701DA77E18D
+:104D9000DF3918DA817DD90FF03700D78BBEEA4FA3
+:104DA000DB5865BB49EF9C546CC407372A534EA2AD
+:104DB0007EAED1B9BCD7ECCC9982FE608D1E2D6839
+:104DC000705F64BC7600260BFBC9A7792D8E0C881A
+:104DD000C92FD16F8845EE97B2D087A89F4FEF5764
+:104DE00049CFB2E8C1DC6F8FC2F10327F13DDB9DF3
+:104DF00041EBE35B8D817E1F803F77BC713A3D7F45
+:104E0000DF18ECF701E89A771AE750F9DDC6103D94
+:104E1000BB1A2BE979A2B181EA3F685C46E5938D24
+:104E2000617A7EDCD84ACF538D6D547FBA713D953F
+:104E3000CF3646E8D9E307087B94A50BFB4FD8EBA8
+:104E4000B07250F9BC98830AFFE67EAB3F1BE5FACF
+:104E5000BCFB8B02B473CF1F07C324817F289FF153
+:104E6000FCD637FD02B4DE2F8C00FDC7F6AE7725E9
+:104E700071FAB86C6C3A03FD73EF309D69307ED2E5
+:104E8000AFAE247B19DE6B8CF465C43FCB93A07F5F
+:104E90009C73D6A5E9D4C31F8FFE4731C61F6E147D
+:104EA000FA30E9A0DAC0E9B6D98F7433E18FDB6557
+:104EB0002F087D1E8747B2E5727AE3F34C86C467FC
+:104EC000672EC601D629C11136E083F31D0E9AD78D
+:104ED000F93DC91186DF627064D2C5F0C6E1A8DE73
+:104EE000E632CCFAA1B63DD5B0EA8B1CC3AC2FCECE
+:104EF0001FDDEC45B95F926D333E188BFC1110FC41
+:104F0000C1F94EF65FDB9E67B82DFD58CBE7DB9409
+:104F1000E9E80781724FF94E02FF403E9764EBC605
+:104F20000720DFA7B60D49C171C18F33709CD38DA7
+:104F300086C1C7CD36CC7C59B32C89DA4BF8FAEA56
+:104F4000F7EF0D1F5A06EF3B19A1FEAB215FDFCF34
+:104F500066DA9F289EC3F6D8BFC075C701FF7F459C
+:104F6000F1008DCAB2DFFA7635ECB80ADF6FB78C84
+:104F700007DFF9A40F8DEB55DF74D7D849535CA038
+:104F80000EC720FFC849740E418F29D0DF39CDDD0F
+:104F9000AAC038D36D3EAAAF17FC58EBECD243F051
+:104FA000EA4C07A7475FE39C6A3CEAD3407F543A48
+:104FB000C12383712ADB4794A17E3CD3B122330401
+:104FC0007C5BAD9EBF2B98E0FB569BC2E189D8BBB2
+:104FD000BB4CF3917114C6A05F670C7EE4F493A6FA
+:104FE00072BCBE96CF07B05FE08FBAEDC7CAAF0103
+:104FF000F8EB767FA6231CD36DA1076C19B1F92BB2
+:10500000387FE8A76ADB7B3ACEEF637BB8E0EE8BB4
+:10501000E8A9DE70BAB3296E27E10BB34EB463E69C
+:10502000F7C4157D37BD0DA2F9C93FDBD92A8083AE
+:10503000FD055A41BD5DD456B0A017F135BFA39A06
+:10504000E28B9FD8A4DDD4568CFC7186D9A6E3FCF4
+:10505000CEB0D7BD634DF8EBB071BB9FB5723B26A8
+:105060000CFF213C60CF5AEC9A45EBADE5856C76A0
+:1050700026EA8D85EBEC2C02285A8C7691E40F9869
+:10508000F7161BB77717B18616B4E73407F70FE6A4
+:105090001B4C1B0070D5FEE2B162B4FB7F69B311FB
+:1050A0007D649C61711A87BB2A3DA207A0FEFD8E1C
+:1050B000B1375E83DCE788B4E0BACC52987F2BEB43
+:1050C0008DCFDB5BADF05D0AFE7878195B6E8143B6
+:1050D000F62BE150B729814802BE7B45F29DD023D3
+:1050E00069AAD5CECF8A2BBF6313F14B95A948E7A8
+:1050F0003386336C4BA17A7F14E3233B1DFE1540AE
+:10510000DF3B6DC12ED4CF6017143153BB3B6D21F3
+:105110007A7F5A796D21DAA74C8B16A17F0F6B8AA3
+:1051200086FCA00B7E5093BC45188FF530583F414C
+:105130002E1D081FF4D3E2A99CC98A30FE0A720A08
+:10514000FDDDE72D3FAA40D9E5EE60D89F23DB1AAD
+:105150005F76F9ACE57AFC07D26138A3384EF2707D
+:105160006B3D2C580CF9CDE3B7BEFFF71E3C4589CB
+:105170006FBDC4D2F074BAA32A8CCF266AA7CD76AD
+:10518000739D93C34F7E39B45F2AECF93AE60B5313
+:105190009C389BF3C1D219368267A9C7E70F43BD7C
+:1051A000A20518CA1FC6AACDEB58FD0510B97EA6E8
+:1051B000B2D6AD235FD65FD05804F47D912DE45173
+:1051C000C723FE0264E73A01595F01C89A7BBAC55A
+:1051D000EE6503D3C4FA3AD030CBEB40A4F3F81811
+:1051E0009DA55EB00BBD08FA224BCD403DD85D4E6B
+:1051F0007E09EB223D21DBE9B17603118EBEDAB9DF
+:1052000062EDF212F557FB8B67768501FF55CF3DB6
+:10521000E805E2B34FB4B64C3FBCAFD9BAD28B7CF1
+:10522000FCB116F6E2BC3F89A8D313F1F38DAA2294
+:10523000FCB1805B417F58D0E9D453ABBF8578FF88
+:1052400062ABDDC026F5DB1C510710B1AE6331E760
+:10525000A76D8EF778F99ECF909EF5BBADF256F50F
+:10526000C4839918EF040C71BF9145C97EAEDBF27F
+:105270006139DA23F5AC9BF444FC7738FE85345A67
+:10528000BFE6E929BDEBE5FE4BBDE0FBFA8ED59FFD
+:10529000A95E2C5BE5BB52F823D3544F3AC5952643
+:1052A000B0094837890716E1F6F08A271F2E7A0FD2
+:1052B000E038BDE59FBD8A256EC4F5C3F9F6DB7FF6
+:1052C000F692AF6FBD7E56F8F3B1EF22F49D6F37C3
+:1052D000B7DFD91EFEACB147BDE82FD56CB4FB419A
+:1052E0003259CD339B7FFE28F2F5EF1C1467A87E60
+:1052F000E6F05B5743B97A873D7D269F865BC98C74
+:10530000D1A31EFE5F362686FFAAE70FEBBE51FC37
+:10531000FD8FD26274A8DEB15F67A37AE3ADB47D7E
+:10532000BFDEE54E408FF6F7CAD1DE5EF1E4973A74
+:10533000CAD527FB149695D7FBFBCA8D87C99E4318
+:105340003C11FD047D7AE8D58B4ED16FBD348EDAE9
+:1053500019B87EF545A791B8F665101F3FFB12C638
+:10536000EF7FEFF0E3FC2B9FFDBE17E7F191D6C076
+:10537000F9F9B195990118B7D21ECE34E8C9DF57B3
+:105380003E7E27F1D9A2637766523C8005726CB4E9
+:10539000868673707E0B36DC40F35BC842C46F9523
+:1053A0008FA9C108C6B334367D470279784DC8C38A
+:1053B000479B1CB8F6B08F50C1A27FF8BA4AFB04D5
+:1053C0008CDD41F1863BE53E045B42E5CF9D9C4E82
+:1053D0009B559B8C6F382D7CBAE59E4EA4CFA9417E
+:1053E000812C8C4F021EC2025F0AEA1DF5D8D42C14
+:1053F0004E1FE6D38AC577A0174BF13DB6EFB40731
+:105400005C4596EFC43AC6C75F2AC607B893D01E5C
+:10541000FB2813EC9B04F3FB52957A19EC0D137FD8
+:1054200099E49ACBF9967BB95C4B398FCC9A8EF57F
+:105430007F7A83CB0F7E87EB3AC015CDA2FAFDDFD2
+:1054400051480F385834913C6FB10B79B6D6CBFD2B
+:1054500049805BC3F529C627D07F1AE19FECB4854C
+:10546000EBE03B935EAEC7F1A89D1E7B6F5AD7174A
+:1054700009F97F5915FBA342FED9062EF77DDBBD46
+:1054800061EE1FD8233F7F14E515E413D7999A677F
+:10549000EC419CF7A7DB0FBE750BF0F5A7ED524E64
+:1054A000AD7A335E4E2B778E6789E4F453B79F2530
+:1054B0009453789F504EDD5DC4C7FFD97A53E2ED17
+:1054C0006C9CDE947AB02FFCC5EBC135AA2FA11ECF
+:1054D00084BF3758716FBE93FC26F9ACEAE9DAC194
+:1054E000143792FC28F9AD871F25BFC5CFD38AB7E3
+:1054F000F8FA1785BE9174B62F67610FC64BF7AAED
+:10550000E45F9F03985A80BEE7B6E74530EEBCD211
+:10551000C5E317E78C6E6F1A3C57A6F2727786DEEA
+:1055200082FA41BEEF76F1F8F6B960B737D5E457A5
+:10553000BCB747F5FAA0BE2BC2A627F23740F3123C
+:105540001C5DACAF7A1E0F9EAABA7397A1DFDEA6D0
+:10555000D27E7645D34D5EDC073EB767C84F503FDD
+:105560002D78050C4C80F71CDA812938BD808679AE
+:1055700009B70B7A7FCCC20F4D86F9DDBE87FB0BD6
+:10558000156BE2EC7BF7521DF50DD8F727AC716D6A
+:10559000CE3755A29FCA0DD6FA2AB686E85615C749
+:1055A0004721E1074ED0041F8D66A3851FC6E31770
+:1055B000425F4D550B7F8276C6B9A33CAE787E8F95
+:1055C0004AF83FBF5D8960DC87E2BB9390FEDD3A1D
+:1055D00033F9CBA791DFF4BEE5F8F40B7F28BE1BAF
+:1055E0009AD4EC7ABBE8A7F03CBDEB7705BFC4F2D8
+:1055F0002F7E9BFB36EBDDBE74DF9F69FFF8DC3E40
+:1056000007C1716EDFCBB97763F925871FE13CB71E
+:10561000DC41FB67E17D9EC830AC1F04F4C67573A6
+:10562000EF97455DB4EE34139DE66B7CBFE3FC9EC3
+:10563000FF7857C1FC833D0E1FCEA37E1FCF0BA961
+:105640007FC9457197737BBF2C0EB9FF7EF3A9D339
+:105650005988F8CFC3E6EC447E4DE5FB00F5BF9CCE
+:10566000B4B909F7C33BF6EBB8BF52FAABBF16A10A
+:105670007E39B793DB0967ED5D8FE33E68AD367425
+:10568000B91DE51E6DB6FE6077DA174C091726C204
+:105690000BC7C339C003CE0BF052897AB12F7C34CB
+:1056A0006BDCDFFCEF878FCF6EC3F16BF64C20B95C
+:1056B00089E14509F0F79E8853A1F9F3F7FBBE2C69
+:1056C00042BBE7D3F6265AC72F35EFCDFFE3E6AD51
+:1056D000442F67DE07FE9BF3FF748DAF4BF172D052
+:1056E0009BCF7F7117959FF5F809DECB94FF13FFD1
+:1056F000D3E8BE13E8EEBD34DD15FB7FD7795F8AB2
+:10570000EEAF08BA7B0CCC2B38B7F7AF142F97F35A
+:10571000BFD4BC7DFF8FCE5BDA3FAB6CFEB67C683E
+:10572000BF86453B7D00E7CAE1B3DB30CC046E4267
+:1057300030913D12B473FF4855781C860DE27121FB
+:1057400026FC094A01F3611C6521D9759ABB85ECD9
+:105750004CA6F93B03808F5523E7FB2957838D39EE
+:105760001EC2F2C0C97E8A6FC6F955CD0A0B2860E9
+:10577000EF6923BF7114ED7CFB705BD45144CFF70C
+:10578000F0798F8863D90DDDE24FB8E3FC0197CF44
+:105790005AEF10FD39D998B67CCC53706B4604C6CD
+:1057A0007797B4D17CDCC3186B33ED033A98E97B6F
+:1057B000E8AF1003B026FBF1EBE2AFA9077F633A35
+:1057C0000388BF11368A6B51521FE1C31F59457EB2
+:1057D00026F71F63F86CE9443C6A0CFC3F3E3FF23D
+:1057E0001B99F01735D18536DC167059DB09BFE8F7
+:1057F00092F4E1F4C8AD11F45962A187C47F02BAF2
+:1058000058E821F1FB75E9124F8F78BC7FC7CEE3D2
+:105810006DF174B2E47764703F240A7EC8CBDB3745
+:1058200053BCE3CC53EF7D0BDB57FF52654EE8E7EB
+:10583000EC760F8BA2FC6A111DFDA9AA0E35619CA6
+:1058400057DAE5D5CF7968BCAA9D8EC84CF8BE6AF8
+:10585000D7FB4564372DEF3E3200E3024F299C7E93
+:10586000E1AE22DCB7ABD2B87F10DFDF063B8F0B97
+:105870009C7E31790EC61F946D3C5FB1AAFD26BB9C
+:10588000C3C46FFFCBCEF35EA11DC973F84985D6A3
+:105890009BDEF071BFE0F4930A876FB73D82798F8A
+:1058A00055DB36EA21F42BB77D4671ECD2E79EF149
+:1058B0007691BFA85AFDE76D2AD1139E44BF783F69
+:1058C000B6AEA396FC84BA76E127C6F951D5CFEDE2
+:1058D000DD1506D4543FFF8417E32FA73AB77AC9E2
+:1058E0003FDDC6FD4FCDAD25F64F2FE597B6DF9BCB
+:1058F000D02F3D85FF007F62BF3DCE9FDFD6EFF208
+:10590000F62F9FF9FC718C939EDEF9E9E30877CDC1
+:10591000FFFEE3E368DFB37D2E632BCCB7FEA93730
+:1059200029DE24BF7B5BC8E9D9412C9C03EDCEFE68
+:10593000CE41F92367F77E948BFEDCD91D7FCE44E0
+:10594000BF7EE9DEA95938EFA52F9466B104F22E87
+:105950009FC89791CB8813C6D3E160C741F243CE6D
+:105960001C7790DFD7135F68AFE5F11A9F882B6C27
+:105970004F1C8795FE705DC7FBE53C3E26FCE24B65
+:10598000C511DE003A5E7519F4DA2EE24471F43A7C
+:1059900083FF00BA7C1947AFCF59E86739B80FD9F0
+:1059A000D1AFCF3842F432F024E3BB47EC019B8EF9
+:1059B00072B033B9874E33914ECF7C9E8BF1F08F0E
+:1059C000EDDD64F774EF7518E8DF57EDFD2DC9C5FF
+:1059D000D9178E51FC948938EB59D6F3C7E3628A04
+:1059E00098DF160F8F3F087C637CC2E7A5F7220E75
+:1059F000C1F955C627FA8A4B4CD045DE93883BD770
+:105A00006E795B6771711E6522D2E93D4B7C5CCE7D
+:105A10003BBE3F03F130C11C5F4B1CF7917E738C82
+:105A20004E3CAE26E36767378AB81BBC1F3806FDBD
+:105A3000411EC7A88F28BF6509E450C6D7C6E871C4
+:105A40007218B9BCB8DAA5E0FD5BF1314CE7EB8325
+:105A5000C4CBE9BF24D6C3DFD4B95C4FB78566EAAF
+:105A6000A6FDECEF897D16892F09EF69918777FAFA
+:105A70002995E2412DED07499FC6CB735D1FE720B5
+:105A80006ED379BCB56EF7FE22D43BA70FBC487C21
+:105A900057B7FD3D3D0CFD1CD9F6BCCEED49CEE718
+:105AA000A8A723263D7DFAD9FD453CEEC7F36EE35A
+:105AB000FBAF16FDD7EFB1F65FBFFD334BFFD5E16E
+:105AC00076DAFFBAD438A7B4C04D38DF539D768656
+:105AD000FAEE54BB3A3D92C80ED4ED967DD0966353
+:105AE0003AAD57E35E4FA2FCDCA5C7A6BF9D82FB83
+:105AF00074206668FF763471BEEAF8716000D2A542
+:105B0000E3D82D2AAE1BBB108F263BB8F88D8652EA
+:105B10000FC86BF13BC171C856F17A60C2719B0529
+:105B20006E18270BF57133F483F9F4983F84FBA3C7
+:105B3000AAB77C3AC2A31A36C39570FDE4FDD9DD3D
+:105B4000418676B9DDB0E62B67CF1671B4A8356F04
+:105B50003D5B67C3711F9CD992FCB81FB064446061
+:105B6000F461CCAB5F904D71E29C6FF3EFCE18EE19
+:105B7000B0EDAAD8BE6DF205E81FF3606C91B57365
+:105B8000E1BB64AD5DC17D007832A4CB9DB6D0266B
+:105B90003D03DBE9CC07AAF1715DD128FF429C7B74
+:105BA00091FDC9767DED07CB7348AA807F88D80F19
+:105BB0001EC4BA14DC0FDEE0E1E79106BBD3E9BCFA
+:105BC000D16661B7F970DF15DB3558D7ED4B9E47CD
+:105BD0006AB596D34B4BEE18EC073F58BFAB540356
+:105BE0007D907E53C98E0106EE4BAF2BC5BCFBF4F6
+:105BF000274A46E740798EA3A88CEAFFB564742E45
+:105C000094BFDF3AA98CEAAB15CA0BDCAB77978659
+:105C1000DD31F9CC00E316F32D406E0FA0DC9E09B8
+:105C20009E6EC1DADA1BBED0F9791816C4F90F9A44
+:105C3000C8E73FD0FDCE0E9CEF605B5713F2DFCF7D
+:105C4000F67E998AED7CCCA0791AACD9C07D7978A2
+:105C500035F1AB8BE4FFC4E7C1487E7F2E39F41BDE
+:105C600084E3DEF9C31F2E479D5AE3273E8ADF27D0
+:105C700066463AD1A542D005E1749AF2902BF12400
+:105C800002E99B3203C751C235EA57577E7D784EF1
+:105C90004A7E11E7C04CE7A43E41381F490ED1337C
+:105CA000FE9CD4013DF829F253CEC20BB908BF3C8B
+:105CB000FF54BAC84D7181F37B58C491407EE473A0
+:105CC0005323CBD086F65DFFA623F4671C37FF571E
+:105CD000BE9D47A1BFAB2A743FA6AE5DB56C5C8686
+:105CE0003696F109A13D21E8968DB444F9BA8BF1BD
+:105CF00073390E25807EE3B9EF1BA47F0756CC24B1
+:105D0000FFE25C725E3BE64F9CBB9BE701C00AAFC3
+:105D1000A01C0CDA931245FF07F8F88B383EFEC240
+:105D2000BACE58C73DF7956F7717F56788FEC0D094
+:105D3000C944B9E17FE7546E679F6BF4111C60168C
+:105D4000EEC7F5F472C7CB7658CFE901DEFB3B4CCA
+:105D500078CF75F449BF3C07A71F3DE3E9B7D0D919
+:105D6000908B725C156C2F47D7F4A385771523535E
+:105D7000BFA987AEC0F635733A8FF09CA18602DCCE
+:105D800067EB4D5F7E1E2B73CFBC263BC62B903E30
+:105D9000BEDE74BC6A993F43EB67A1EB5884FFAA4F
+:105DA0003D9FD9107E49CF87459E7FFCF7FFE85085
+:105DB000C4B8354D768C93ECD6C99E8D6F371D0FC8
+:105DC000558D8F958B9CC5346E968DC73B7AB7E702
+:105DD000EB5FAC5F279DCBEA8B1F8B0CDE1FE0FFD8
+:105DE0001B66FC7FAB6FFCCFC276807F7A7E0DFC9A
+:105DF000DF84EDFBC2BFB4A3AB855EA8C67D14E013
+:105E0000A30F03B33387C2F8E5AA9BE460F156956C
+:105E1000E40FDACFCCC98CE991C5931AF6E37C176D
+:105E20003FA610BF568873A69F8ABCFEF87CA88543
+:105E300073C2B4BFD32B2F2A12E7D7C5E5BBD7C790
+:105E4000F87630CF53E3E7B6542117A58B0A53D029
+:105E50001EDA67F7FD2BD9D9AFA86C5302FC6F444B
+:105E60002633D1755083CD9227CB2A522DFD962D06
+:105E70002AA47DEF251EDF45FDAAC1CBACEB765EE3
+:105E8000D87ACE6848ABF59CD1B0B6FE96F657AC42
+:105E9000CFB7D48F888CB4D45FB96D8CA53CAAFDE4
+:105EA0006A4BFBAB764FB1944747BF61693FF6E859
+:105EB0006C4B797CE72D96F6138ECFB7D44FEAAAB8
+:105EC000B2D45FF3F1124BF91FBA7F68B5536C8CF3
+:105ED000F4234B52485F1E6A9C988BF9D86C9C52F5
+:105EE00086F82C15F98487EED06D86179F0536034A
+:105EF000F4D681053369DD3F744766C047CFE200C1
+:105F0000FA354C9D3C2E51BEE6546352AE392FAA51
+:105F1000D469B7E8B7A986B5BCCB21F6FD0673BE38
+:105F2000F9659C7CD91B2647C13264FD170FCDC291
+:105F3000F140CEF6093DB7EFB2F45C6643319641CD
+:105F4000CE0E25923326D6D912C14FF00CE8981FF9
+:105F500059E6A1F538802F7DF43EAC81BC4C71FA36
+:105F6000071EC679D9FCE9C88465738287787F6289
+:105F70005D66C36D5F675D96729E6D13F96B693CDC
+:105F80007FED91050529CC84DF3F386CC28E6EE32E
+:105F90004FE3A8AB276F35DFFCFEE324CD942FA79A
+:105FA0002C9A49F922D97DE8453D3B7FC616D0C7DA
+:105FB0007A8E8F9EF27DCB1C5BC23CB06EA147A552
+:105FC000BD3522666F75233DCE64BFFE10E629D530
+:105FD000CDED267B2BDBD676C7119CD7ABAA885F8D
+:105FE000FAF8F92A61272F98F1C01D47705FFA5F10
+:105FF00086917E92E36C689C3E43339D231FD88735
+:10600000DF74A593C3F378E3F0191594B76DF0F33B
+:10601000A2A2FFDC706D39DACD8345BEE943B6C478
+:10602000F92E6ED14F16921CE135DC24276716BE7F
+:10603000E3D5601E8FC2EAE5C47DDBAB3A8BB91DA8
+:1060400016F0E339D4DCE8AD0F61FBDC6C8DF25D5A
+:10605000E3C7CF9A1B6ACD83F935A7D9FC6E2A779F
+:106060002BD8DEF123C6FA41FBE6FFAD123CCD078B
+:106070002651FE87C3DDC0703F55CEEB60DAA384A6
+:106080001FB52399D64126F6C565BCF5F3EC8A4EBB
+:10609000B4373E5F67A7F13E87391AD0FFE71D2A64
+:1060A000EDBB1E494B8ADAA0ACB67A68FDCE45DB63
+:1060B00013DA2FECF0447C7931BC68EB27D37918E4
+:1060C000C7403EFFE63477C49D47F34EC7794B384F
+:1060D000E5BC07F5E1679608B873AEE839A7C1904B
+:1060E0008F5543A37E17A4F2739891C689825ED61A
+:1060F000F9B464CFBEFE663C3FF486CA3035C4D7DF
+:10610000D546F35F08F3C7786F3C7ECFF8F2BEB098
+:10611000A9046709C2A9AE2FA779503BF8AEF6676C
+:106120000A7B340FF930349DE8DADF46E7027BD989
+:10613000074E2E5F339C3C2F57CF2E98B1A51F3EA4
+:1061400087925C7CD3D9E7BA1F74727D44CFAF715C
+:10615000BF00ADFF521FA9019BB073B95EEAB19FAA
+:10616000F4D0779D19B1B29AF2A322ECB76FFB6C11
+:10617000C77E1DED333723FB59EACDBEEC33B4CBDC
+:1061800090DFA45DB6386E9E30BF1A31BF9A44F3DB
+:10619000EBA56F6F699076CD12E745ECCA0C3DB167
+:1061A0003E7A52D0A1DED019C59B688D02BDB3D80E
+:1061B00046E78D99167199CF976F704ABB6ECF7E67
+:1061C0001DF10CF3463C6783FF5C4E7AC79E302F6F
+:1061D000FC52FE48FEEAC29D47B13FB07311FAF38C
+:1061E0006DBE94B48BD817F665AFBACC787DC02954
+:1061F000F2B963787C50E0F1C184784C073CDA2C2A
+:10620000F6E1AE021FE1F1A7CE8BD88767BEFD6E27
+:1062100031AE476705BEEA7AFC5CAE9FFBC32285C0
+:10622000F1AA5ACC5F76F232EE07ADC0263998DF7C
+:106230001C7C02FBAFDF6D3D77F863278F9331370E
+:106240003F372BFBCB14FA1EFCEA7FFCD0477AFFCA
+:106250009F703E31FFBAAB18FDAB152F5C91827673
+:1062600059D9AE9B0D7C9E4F1F4AEBD9995D8E008C
+:10627000C279268DE7EB9DD935E108C61F3E6D3CFE
+:106280009A6FD6F7679E3D566C877ECEEC3C56AC37
+:10629000517E70C46217D67EF59B623C8725F3AAB7
+:1062A0007BF8C5C9D789752E1ED7C8C8D45B305FA7
+:1062B000FC42522AE1EBC14CDBFD89E235A83E6984
+:1062C000DFDEA3D33EE59211BE156E8CD7E41994A0
+:1062D00087BB4209E42CC07D96594E3FEE03A4E7EC
+:1062E000B3E1792988C21073033E1D87DAE8B869E3
+:1062F00052A7B11FCD2319C7D14AB9BEEDBE41A7E0
+:10630000BCB164CDF7F05C2867CFD168BD93711D37
+:1063100047323F972CE33A3DF0BC62A77568495E6F
+:10632000A8AD04BE5B32298DBEF3CE7A8BF8E59C16
+:10633000CF16B6E37CB46E8AEFFCA47178C650C069
+:10634000A391639B4136CD5F005BA6FC7FAFC6C2C5
+:106350002960DFAC06FE1F0AFCDFD1E8A4F62D6041
+:106360001F1A69744F42EC9E0F93DCEC6C34A8DD6D
+:10637000CF1BB3E9BB071A7DF4ECB12318FF8ECA1B
+:1063800009F4EB7FD6F3BE467E9F882CFF711CD8A4
+:106390006940EFF4094055C04BBA387F2EEB1F6DB2
+:1063A0007C6548D950810CC067FF1A63E3AA8BC093
+:1063B0009BEE88A4E211E32B5D2C5C3611F3FCBA52
+:1063C000EF2F4FC5F311F794958D003CE2FEF6D503
+:1063D000402AD703CD783E35A7C6D78471BF9CDD50
+:1063E0004A3BAE5F39BBD796E03E02B4A37383B29B
+:1063F000DF0C17D773C9071F51F247E1E602DF9799
+:10640000677B932389CE978E73713DE777F1FDC14A
+:10641000D5625FBD7B969BF462F24117F14BCE9E35
+:106420002B697FCFDDC7BE727C3FC907FF4C71600F
+:10643000B7D2B61FF729D9026E7F4A7EEAEB3B6CD2
+:10644000AF5F46FB737E8DE2C260F6D2FCCECC1A03
+:1064500048F8C6F6663D7E4E4F6C9705049E56DAA8
+:1064600013C7E935C6C719D7D94DFB99786F13E221
+:106470003BE78D3605FDF5330ACFC7E80FF8D8099D
+:10648000E59CC96D74AFD373CE50B90BBEFB93714D
+:10649000BC602580E32AFC7D2E7E27F1A116E94E03
+:1064A000D427397BDEE3E77C6C5D3AE6BF2DBAF793
+:1064B000798A3FAA7A308F9757AEC4F8648637B886
+:1064C00011F984859F2F3B047CF2A038B78C6F5064
+:1064D000EFAD768972B8BD39007CB2DACECB8BEEE7
+:1064E0007D8EF866B53DB818CF3D63B919FA5F9D4A
+:1064F000DA9E6D83B2BBE999E6A383B02CDB3FD370
+:106500001C9E0C76A84BEAE7600EE2BDA76C4079B2
+:1065100094A9ACF13273F2A79C5FEDC13F1F190043
+:10652000FC52B787DF73D383B7DD6B155C8F7EDEDC
+:1065300078D4D7AC093991FA03D6F92BB219F929D5
+:106540007A4489E42B78DF476BA6395FE5BBC98ABB
+:10655000885BC0F7E6F863DCB9363A2A83EB73331D
+:10656000CF0B89A7EB9B49256D4919781E35B44A95
+:10657000453DF88CDDA0BCFA2E8DF4F6699957DF05
+:1065800060277BB0469C73B52F0FAD1A817271AB3B
+:10659000E6C7F842755E5B09DA43D52FE6F99B58EA
+:1065A0002C4FB73AB53D738C3B96A72BCB2B445C55
+:1065B0002A2BB52135B510F763D6E6E27E491D6B6F
+:1065C000BBED8708EF6B2A437EFF64FFA414BC7702
+:1065D000A816CA1807ABED38A687A0DDD549FCBEC2
+:1065E0009BBA0EE01B37BF872650C0D846CD484225
+:1065F0003DFFF340C348348937BB7E5DE6FA07C6EA
+:106600009EC80F1848E75FDD7BBCD98965DD18C1DE
+:106610004663F9DF9A91CFAA47DB28CF9285FFED39
+:106620005060A8D8EF8572AB6BD05473DC3B479CAD
+:1066300033ACDFE0A6F360B02E6F42FEAE5B6F0BB3
+:10664000E3FE99CDD949E7807EE562823ED6F353D9
+:10665000EB14AE0FC30B783C75E98CB46FD0F9A97D
+:1066600095F946F82271DDCA0B49744E4A96AF4E31
+:10667000F251FF955A98F6912A2F78E97CD5DF6F71
+:106680003CA7E5BC56EFF1DC048F1CAF26361ED1CB
+:10669000F5E098571F1A0A745BBAC36E7398F86EC8
+:1066A000E90EB13FEF0A64613F193AC733437F10E7
+:1066B000788DEEB8E1E5B0960DFA5FCA77F87C7395
+:1066C000D964A45BAC9E59E53F80FEF87D49B2FCDD
+:1066D0001FCD650313B44F8A6B9F2FFB575762FF83
+:1066E000F1F06424C5CA4E68AFFDD5D15346F8D643
+:1066F000DAE2FA4B9365F74A1C5FF255EBBDE98786
+:10670000C3C057F7A5B695A0FEEF5EC07C788F1684
+:10671000F2ABDFA46F5B5D5CAE2B2FE45BE81DC3C7
+:106720007B81852E1F35665BF63D17CD5D4AFBB339
+:10673000AD2E412F16E6E76C360C6011533CE8FF96
+:10674000C3F1B7C271751F70FCE37F311C3ECB787B
+:106750003138865AE0FB5BE1D87463C137F2A0C9D7
+:10676000834AD8998FEBC28F795E9C9A5AE66BC2A6
+:106770007D991F6B14D71FC678BE4BBEC68E6A6349
+:10678000507EDA02180761CBB9BD02EF5BED63689A
+:106790001D227F61C81EC73CCCDBC8AF0C2CC627AE
+:1067A0001B5848FB3E729F948938A1DCE71966B0FC
+:1067B00012BCF7EF44D23C5AA7F28373AB31AEAEB2
+:1067C0007AC625E17AF8A02D12C6F1C20FF0F13297
+:1067D0006C917627DA4BDEA106AE77195EAEFFD854
+:1067E000AA425AFF36D9F247DE0170AC544A925E93
+:1067F000413CA7E6537C1CDFE33D3B9BC4BAA5A606
+:10680000FA0D5CA73689756B85D0EFF27D725A70F0
+:106810001EDA113F59356DAA7312EAA1406B3F5839
+:106820006FEE5F356D65F6245C6F7CF94E585FEE58
+:106830004F9AB6D20993D9D4E4EB6FA4C6CAC3FE6B
+:106840000AAB35E989692B03A0779ADD4BAAD0CE34
+:1068500081FAC3E8273E9126F50EAFCF977A0AF565
+:1068600012E831B5A9A71C46BD94DFA377A691DE37
+:10687000D9F2B84AE5A5301EDA31308F30DE0FD6B6
+:106880003D4C23FFC805B02441D935229FF6CF6087
+:10689000DE2C09FDFF11BC5EEE77E8C36CB4DF812E
+:1068A000ED118FAE1CDE5E9FC5CF4BEB1E37F96D31
+:1068B00072FF4415FB7749224F453166911FEC5C0E
+:1068C000336609FA51CEA1D6FD693D2E9F458DCF85
+:1068D0006F7147C9EE6A4B12F1EB7E2C9BEE4D10A7
+:1068E000EFC1521E83CFCC9B9B4BE83E3D0F333014
+:1068F0009F3A3B1465667B493E1DB08EFA4C72E3AD
+:1069000070B340A27C8A85C9DC1E765FD0B89FA890
+:10691000807D83EBA847D8E1C23EB2CB7B8EE2D626
+:106920005D692FD9C57D7A4B674CC9C27349AA3BB3
+:10693000E0443B67BF3186F66954E6BFBEC464EFEE
+:10694000344767507C5233020CED9C57859DA31A47
+:106950007E66B6735A1AC10187B56A737101DD5F2D
+:10696000F3A82BEA1C82F47DD0E647BD71704C552C
+:1069700058C1F8E4324672BAB938730AEE336CD4AF
+:106980008229B7A2BCBC01E3F938DDF83EF70A055D
+:10699000E3E99F3B8329A80FEE4B65163FEAFA64B3
+:1069A000EE8F6C4DE2FA47FA092D004F14E0D02E1D
+:1069B0008CA4FB7C460BBB549F5B46F1324C03C25C
+:1069C000F8A78335840D77ECBE3A47B6CD92FFA881
+:1069D0005D28A278E2D6243E8E1CF71E71DFA02C23
+:1069E0003B59038F1B038F27F2DF6A059C0EB0878C
+:1069F0007C649FC4EDFFF7B68FC85E91F4E9B15394
+:106A0000147E2EB42FFBA8FE82CDA26763E7D97552
+:106A1000D2CB67C57D01320FC42DF4594B76A8ED5A
+:106A20009ABCD8FD009AC8075923EE0560D95AB719
+:106A3000F91C7E32C663A0BE59E48524C79DEB775E
+:106A4000B99792BFE01AAE59CE81395988BE73F812
+:106A5000ACEFB5ECF8FB02C23D796094B7A8B14742
+:106A600014BA1C80DBBB03441ED699E47729DE08E8
+:106A7000F6EE4127ED4BF073A2321EF675EDE357AB
+:106A8000D1AE22BF70FA68EC7711AE4718CF66C15D
+:106A90001CBEE9D8CE286F28C9DFC5F89D63646F96
+:106AA000A952CF859F6F463F2AC36CDF99ECB52B67
+:106AB000573FDFDC5C487E079517DDDB467A70A523
+:106AC0004B96575319D6AB28FA3D6C97C387FC04F5
+:106AD000DF07506ED88D05642FABF9E0D202DC657C
+:106AE00078FF21EE0FEC726C427B16FCDAF92E5324
+:106AF0009CEC8CE7782E2B4CD85FD8D25FEED7EB8E
+:106B00000FC6EFC03C23595FE65D1F55F9773EFC89
+:106B10008E0DEC7C370CFD3FF88283EE2591F72C2F
+:106B2000C7F3EB9464EEBFA3DE30E773EA732B0286
+:106B3000C89C523E1DD949963C7029AFDA85E124A4
+:106B40009FF2BB5793F8FEB1A60528AEA65D282498
+:106B5000F9DF2AE8DAD2685C629CB43EC61943FDCC
+:106B6000F43D4EB1D0134CEC8F6986F91E99BEE40A
+:106B7000357E3F305EBFC9A7D46FFB44FFF392ADB3
+:106B8000F1E5AAF5ED4790857E680B55248FC7BCCB
+:106B9000AF77BCB814D7D8A245286F77F67E5F8749
+:106BA00093FBBE8813146CBBE300B26B4372684363
+:106BB0001294AB92C53E4036AC6B2AAE5B3C6FE99B
+:106BC00011ACC7FC8690EFE1A9A8A7669553FCFA23
+:106BD000B9E4E06FF0BB7B671753AC40C2BDBA911C
+:106BE000E7DB497DE9467C417B87D6C0E39EEE40EA
+:106BF00014ED8B0792DF9CAA211F6A5C0E96AD3EB6
+:106C0000B012E3224ECD4F7CE574DB7CB8BE3BC1B5
+:106C1000BFC375AFC96DA378D20ABC07380FCF1BAD
+:106C2000CC34505E9778F2B3D845F4A3762153E87C
+:106C30005FEBBD3A7FFF71D2E9FB5EF7F71C9C1456
+:106C4000C5FE343FA3FC1944C2FB26BD2AD7F5F884
+:106C5000EFE2FB97F894F8756821C2AB8E76430299
+:106C6000B89E4CB6EEDB6649FD99FA564114DED665
+:106C70002A5D5EB44F402F3E897C5237AAFBD78AEB
+:106C80008FF46926B767C2F2BE02CBFD48322EAF41
+:106C9000BAB95D23E15FF2CA834EF3BE533CBCF147
+:106CA000EBA5BBD09A9FE11C9814775F70131F4728
+:106CB0000B12DFD827079C28274DC61803ED9566D1
+:106CC000CDF7DB00E595D8C96E063BDC32BE7CDE35
+:106CD00027EE073E26ECA8F87A8FB84F39FEFD67FD
+:106CE000C27EB86FFFCDA487FBA21F1EA846FA7A0A
+:106CF000F29981E773EC025EEF25FAED8B8FEEDF00
+:106D0000CFE3BADA4467045DACF8F1547B3080E736
+:106D1000C9D4D18CEC5D75101F1F6869605CD83BCD
+:106D20002E8D0D37ADB3F70E9DCDEF77CE30E87CCD
+:106D30009FEAB10513D999124F8792E53D159C6FD3
+:106D4000B225DF0CFB3DDD836EE29BEE447C7328B5
+:106D500099EB2B84C34CCF7B87E66725A24F4C2F42
+:106D600072BEBA145F7488FB126B1137E0DFD488EF
+:106D7000F3F6A7C53D41F393C57D4106B78BE5FD0D
+:106D8000171D5A2019EDAAF93DFBD4013A9752E399
+:106D90000AA44C42BE3CC6EDDE8F4AF8BD651FD941
+:106DA000032988E78F8EA94A13EDF3F3BC40996756
+:106DB000F591DDB77A24D4DFFE5335D044D5567B28
+:106DC000EE340B8CFD17B46F77ABB47F94F7C03CF7
+:106DD0007514B4AF00430FF9687EA93B8CEB6FC705
+:106DE000EF1BDE453D74FBE30EDF7218E7D0FAB10E
+:106DF0005F60F9E41A8FCF4171B27C05EF155FBA7D
+:106E000036CFA0FDA3654CD81943CB4B8732F6147F
+:106E1000FE53C69D9D74CFB8A80FB694C1FC4666BC
+:106E200074D8DC0053C41D6CC1734E2B9B82D9E80F
+:106E3000FF5DBFA6A005E38F999981CE6B411FAF7F
+:106E40005833BC1CFDC18E47457FE1112DE8EFFD95
+:106E5000D216CA53A0FEA93553CA292F7788ECFF52
+:106E600046AA9FFFB32BBE386E204E2BCB31665601
+:106E70003C57C2535B5E0ABA7DC164595EA2633956
+:106E80003D9959E260F6983F4971B68E1EFFF1AE0A
+:106E9000728C83DD3EA5A15483FEF33C3F6A290436
+:106EA000D198D0566204F0CA5CCF03E5C919786B5B
+:106EB0005EA01AD793919E75E5389FF47ED6FED3D7
+:106EC00055114F65EB5BB0BF1EF8C2DB5A30BE2ACE
+:106ED000DBBF7EDF5B2DE18131BEFF56EC7EA56F0F
+:106EE000BA33E8DEBA231862CB5DD6ADF37C5E918F
+:106EF0007F33B0AB88E71589F2F02E9E772DCBD982
+:106F0000BCDCB13CF13AFF132F97B78EA4C4F53F18
+:106F100076737D0170939E4F39CE02DB13C8518585
+:106F2000DB4DED0E839DE74C8BC9D3F50EC6266273
+:106F30007E9393C329FB89FFFE6E310E0B5F9F8604
+:106F40007C3C53F0F910BFC2F394762747F0F71852
+:106F5000C0CBD2BE0DF3D926E211DB5CEC7BB36073
+:106F6000E8CC2416C27B7332FA41B990BE0FEC70A4
+:106F7000C7FA7B8D8B309B3A24B805FB9B9A9533DF
+:106F80007A455EAC1F80BBD939C602B736310DEBEE
+:106F9000C3FD314ED283CF423E0FE013C2170CF334
+:106FA00034FE7E4047E7C87CD4BF2331E9C6A4E75E
+:106FB0008B3B67D3799AA55EB13FE2E3DF6794F23A
+:106FC000BC97EE1793F9FD99CECE02F37ED6C36E31
+:106FD000916770CFCC87E91C74A79DD1F9851D25D9
+:106FE00017CD3BACC1B89CC96EACD1A2E48FD560C3
+:106FF0005C6E2CF6F71A9D3FC47E7C22FE8C71B528
+:107000008C1589E92FD7C19A0B060BF7EBAD2F63CF
+:10701000FDA7B3F0D84BCF2BD69FD56FECDD9F2EBD
+:10702000E2F802EF9AC0BB9E18CE7D924F01DF3688
+:10703000137F2D10FC26F703CFEE1AB1C9BCFF2A2F
+:10704000CF0D817E7E1A7F1F21DC9944FE4AB11646
+:10705000B80EDB1777A6D1FE80E40FC91792AE1DDC
+:10706000690D146FE97E44A1735CF1701D9670ADDB
+:10707000E7F7F665CD0DA9E67BC6A53C40FF1DA24E
+:10708000FF7113497E1EE3F20072732BCA2FDEC319
+:1070900082F3F07715997F8F40C25F84BC389EE8F9
+:1070A000C8F1FF824BE4AF70BCF5C67FFF4BD03315
+:1070B00097E859DC7980E659D387DC5679BD3C8F57
+:1070C000ED78D4EB83766304FF77B4BF4FF78A750E
+:1070D000EC5699E2E3F346BD55DCA38FC7BF3C05F0
+:1070E000F471564F19F4A50FE9D0A33FA34E67AC36
+:1070F000FD77BDE3A735A3BE14F7F6A6AB7834370A
+:1071000006C79FDCDCBE9A184A1CC76AF07A2C7A44
+:10711000EC916553D8FB30FFABDD3CFF6A625798BA
+:107120007E5747CA75BC9EEAE7E174343CFF97F48A
+:1071300094EB127ACA25F5147F7F186DDE31B8BE44
+:10714000761529603757D80299E87F7D70EC8774EF
+:107150003E6591C8CF1985F939B86E1E0FD2BAF2C3
+:107160000956F23C9D819E0CCCD7B6E6E9B02DFCC9
+:107170005C6B3C5FC5F8282CEC370187580FAE7765
+:10718000743DCBE3195679966580B3CE36C454EF7F
+:10719000E6EB96A403D0BB99EE3916727C6257D603
+:1071A00046D4B7AF7B789E4DFA90C0689CBF944B95
+:1071B0005857059FD8BE37DBCDF5C6EC04FC3BD94C
+:1071C000C3F5EC82F59C6F3AFEBDF43AC47BC7EB85
+:1071D00069A9CB4D7AA24CC8B1EC57EA21F99DAC14
+:1071E0009F22FA9BE6E17251E6E67C877024CA276B
+:1071F0002833ADAFC43FAD9C7F60BE61337FBF2EEF
+:10720000FA8DE153ACAB02CFB53AE017F0B7CD1E23
+:10721000EE8FF949C59D36EAAF62B787F2322BDAB5
+:10722000391E2BDAF6DBAA4DF889EF6FA987CBD18F
+:1072300046710FED611BF01BE2DDCDE13BBB2B87FF
+:10724000F4E7220FB71B2EBD6E5C9E9ED928F2314B
+:1072500080BE94BF58FBD2808D563DCDFB4BEF17BF
+:107260005A81E7F0D21F667ECC29033C45F1DCFF52
+:10727000171EA177F4808EE76DBB1F61B41F3F6CB2
+:107280006E60B40FCAF541F71805FA2B68E37AB8B7
+:10729000781DD83128774EB92EBCB2DD3CDEDD1E1C
+:1072A0008FE51C61C57A8EBF6160FF3C8D4FE8E7BA
+:1072B00059B2E3393C271E6ABF06E34EF2FB564142
+:1072C000FF4BC1578CF08D8BC187FD53FE8A3BB8B5
+:1072D0001CFBADFBCDCE01E67E1FECE977FE14175B
+:1072E000EAF9B5B0EE9074860EE2B98B8A3DA90634
+:1072F000DE9300F26C437F478E5BA1C9DFCBE92AA6
+:10730000C67BC20B7AC69174FDDD33E6F96FF6B821
+:10731000FFAEF4EDD043349FEE1D00AF2F86978E65
+:10732000F679CB5DB84E1C677E5C2724BCC3E6763D
+:1073300079315FA45EAC1F305F1BFA2FE93FF5B1D6
+:107340001588B7CE29744F423C5F4B3A0D675C7E7F
+:10735000A49F361C03FC50DEE32912FA87919F7B21
+:10736000E2A5BD4FF37B2D385DEAE7723A767942AC
+:107370005F7832627208FA9CEE2FAE58D7A38FDA8C
+:10738000F9FBCEDCB980CF5F7BA49C5BE9921E6CDD
+:1073900077D125B382AFCFBC382AB28AD399C6EF52
+:1073A00068F7441405CFD13634A1BF2DF504C2636C
+:1073B000CE5792F0F4D091011D47C5DE0F9BCBFB59
+:1073C000AB0779473EAA511B941C85F400C557B3FF
+:1073D000500F4039AB9DB7637BF8FD0D124F353729
+:1073E00041A7E077FE9BA790E621F19535376AAB80
+:1073F00029C47CE503833F30D1F9A8D82F40BCCC09
+:10740000267F83EBEB1A353810FD5696E5A073A85E
+:10741000B00E917E39EC629A0BFA7B199EB82E4D14
+:1074200055EFA0734253872824C7A00164BC877E10
+:107430008FEBFA6B9379DED65FBE3F14E79991CC60
+:10744000F910FA718A7E9CB40E8AF5E05F73C1AEC2
+:1074500053627AF9B0A2503F87FFE1CA4D2B9418CE
+:107460005F627F683F1D56660DA4F5B22343240773
+:107470007559F2C97AAF675DB9586FF617D1BF8BEE
+:10748000F99BCA3DD380A7264C6F8FE295D34D61FF
+:1074900075DA3FC1B853C1DF74A1FEF472BE3E9CE1
+:1074A0001756BD08D73085EE573E92142AE4F7F4FC
+:1074B000F2713245DC2653E42BA3BD80CF8897EBD5
+:1074C000FF9129FCF903F1CCF4268EF3AC13F5F50A
+:1074D000E25EEB552589F3D9067A154BBCE57AB106
+:1074E0006F81F7FF7AB9DF29F26CF93E07D8F7848C
+:1074F000DFD27BE6D2BEDDE79D37A4F0FB1BB83EB2
+:10750000F85009FCFA26059F41BA3F2FFCA64AF91C
+:10751000EF1F18012FE637D52625CEC32E11F3AB6A
+:1075200015F3FFA891DFB7B000F7D3407F8CF5F2D9
+:10753000792C6AFB7639D27BD13A85F6D3E4BEBD8D
+:10754000A46FE506D5124F5F80FB69FDFE163FCAAA
+:10755000DF871F35CEE247C971E3FDA9138DD996A8
+:10756000B8FFFCB621E29E0BDEFE76E627B86F6F11
+:107570001D60D9FF63AD1997770F28F84FE184F0AC
+:10758000E9A46FE5FB138D4E1636C3F1F150CA7BAB
+:1075900018E80DDD8CF48DC191CCC26638D864FE3C
+:1075A000BB572E1E77053B9CFB2FF0DCE8263B9D4E
+:1075B000EEA9ED898381FE3052501F95CCF38E8F5A
+:1075C000F90D52BE6A2627F61FC6093F779C9BFB22
+:1075D000C729C7A53F9DE443BD28EDF1F8EF1A7A0E
+:1075E000F8D66A4F5E2AFE00FC1B36FB47F1FDB65B
+:1075F000887EBF3EBFE4F7C12F05FF257E77F1E40B
+:1076000010C5F7F0F221CC45995066F5831EF5F2CE
+:10761000F5FC516F327D2FEDEA8AB9D6768F63BBC8
+:10762000F1F84CBEAC788ED97E5786A0FEE3FDC93A
+:10763000DFDDC93BF53AE57FFE0EFD44E8EF584A31
+:10764000602BF2C71A912FBFF1AF07B36F477BE8EA
+:107650005FECB45F5FF2D8D21598CFEC6E570C3A5E
+:107660007FB4DB2A0FDF5CD63EB802F0D12EE8549F
+:10767000E3E7F3A8F147F5A16ECCAFE6E30F6CDFCB
+:10768000AF68267E1B58C9DBBDE4B55BE233FBB0B7
+:107690000CFDECF11AD26FD93F231DDB0734B40384
+:1076A000FAE3EFDD003CFD1B18D9D1FDC729D4FF5B
+:1076B00037C76D54F0F7B7E43C5B6DB30A0DF8AE15
+:1076C0003533D98FEBCD00237408E5ABE69D681404
+:1076D00097C709EF746AE85F8D320287F1BD9C9706
+:1076E0004F35FAA3DD9EFC0E87AFAD27AEC4D71B86
+:1076F000C6560B3B7413B7C7547694717B9CD6F572
+:10770000CCE5C369DD93F3C94C13EB46260B61FE50
+:1077100031B46F253BC5C9D7FDCCE5FCF7F2243D5C
+:10772000637EE68831E8670E5913D5E6C3772F6D7F
+:10773000B025BC5FE37D817798C7BBE6795C4A5F83
+:10774000C976F63EE28C92DF93A727F6DF19BB9F3E
+:10775000EA4B1E4BBF85E4B259A7FB1025FE471923
+:10776000C1CF109EFEED1B15C4CD0991577062D597
+:10777000D30ADA91DF5FCC0C35013FF5C8EBB29D3F
+:10778000832B4C7A13FA277A6C8CCB1397F116570C
+:107790000AF77FE61B4196329EF276C97F5EBC8572
+:1077A000FFEE469FF8B84C7C2995DC2EAF99C37F3D
+:1077B00077B4E4318DE85DDDCC7F77B066FB0E3ABF
+:1077C00067C77EC4FC28EF35ED3B940A18B77AFBF7
+:1077D0000E6581097F036A22945F7D8547EE3B44F5
+:1077E000C96E8EE76B8C17A09D72C4C5E5FD7489C8
+:1077F0003B8CFB10A7EDA11A6C773A27D98FFB942D
+:1078000012DF2FEF9846F71D78763AA2F86CB56D27
+:10781000CA7642BBD691BA1FF96894111A86784984
+:10782000D3821DF87D6ABAC78FFB183E071B43EB56
+:10783000F565E261421C3F4CF81197939B52BC42A4
+:107840002E18E53D5D9BE291F613E9A723763E8F66
+:107850009D8CC31BF106C6A5201F1EE5BF9BD0BF94
+:1078600026AA60BE48FCB8317E0A5C8DF05F3E9C63
+:10787000ED3AEAF56AA1674A1EDBA2BC6F827B067D
+:107880001A55C89FDB372A1827837AD233D09E61D6
+:107890005E52FFEDDC2FAD86FA0526BD22E7914052
+:1078A000BF04713EEE773A0F71FD12E5FB0202DE76
+:1078B000787ACE4DF1D1F8E5601ED07B3D3C1CFDC1
+:1078C000E223F949D49F94F778F99C2BF8BCFF8602
+:1078D0002D8ACD4DFB2764474AF864BB6329534288
+:1078E00088AF09D33B090FB51B349ACF543D38F408
+:1078F0000E933CD4A5703BEEC04DEFD2FD3FEB7E26
+:10790000718CF8B116FC69F227DA8EE937E0BA1209
+:107910007E52C5FDAEEBB849C21E12F7625DD7C1FB
+:10792000F56F6DC70E0DEF91947C9A77EA00DDA795
+:1079300055DBEE60E84701FF2D45FCC4F3A9C48F79
+:10794000D4AF7DD113F410F793C2BA88E785F2D093
+:10795000CF91FA3922EC51E6E6EFD78A79C5F827BC
+:10796000D49262D1AF2E928BBC53630E605E66AD33
+:107970005FA1F392E9A5E277C84C7099FDBE78FD4E
+:107980008871C320F7E373679BCEA9F5E879F1FD11
+:107990003AA4377F1FE5EF593EAED712FE78FA457D
+:1079A00053B85E4FC0678FE13CE2D731B9AEE73DD7
+:1079B000BE53C3FB9224FF5C877437F1CFF6147E6D
+:1079C000EFEEF6148DFA7FA884EF3B3E64E7EBD729
+:1079D000434D4ECAA37CF9669ED7E5B9458FE2F3C5
+:1079E000B06D7E0DD61FEECFE168B52DA773772061
+:1079F00097CF205D0FDCE4655C3F727DB8EE79AE19
+:107A0000CF6AC26EF2736B42DFA9A07CD774979FD6
+:107A1000EE010D1DD26FF0F4E62BDFCEFDF4FBC7B7
+:107A2000D7B573F99374007D4AFC25E541E23586AC
+:107A30004F8E77294F921E11B9CF03FCC2ED23EE72
+:107A400057158A739195CEC011BB0FFD161E7F2D61
+:107A500014E72365FC75BEA04B912DF81ACEB357E1
+:107A6000FCF532FD83EA65AF8EC0DF0FABCA3E4A3C
+:107A70004F29B7E0BF5AE4FB6D41F703C25F3C21D9
+:107A8000F444F5B87692CBEA0F1A489EDDD3B95E7E
+:107A900073BF63D5C78CDD27E6BB86BE9B9ADC5ED1
+:107AA0008EFBC7537FA618E8D7F705E7223C2F8641
+:107AB0007EDE8683DE79885FF13B52F25CCD1F85E6
+:107AC000DE39BD4D15BFABD9A05FCCFEBE547F2CB7
+:107AD000FA8642F79A08DFF0F4F6D2491FA27FBA7D
+:107AE0002D857EE7E4D3EDDFFEC187E9F83B22D7A1
+:107AF000FAD14E485F1124FEE9CE70F937F178ECE7
+:107B0000748C5735B51FF4E2399C4F9EBE6A0CEA5F
+:107B1000ED2483CBFDA9E7D5658897FF0324F17B8E
+:107B20003E008000000000001F8B080000000000E5
+:107B3000000BD57D097854D5D9F0B973670B9949F5
+:107B400066924C36B24C02045412262161916D9219
+:107B50001016599CB014906D640901421220ED87F3
+:107B6000D57E190CA5C823355A1770EB049762B55A
+:107B70003568B441830E0808553F47848A15EC8860
+:107B80001441423245DBE25F5AFFF3BEE79CCCDC96
+:107B90003B1350BFDAE7FFC3E3733CF7DC7B96F798
+:107BA000BCFBFB9E3377FEEAF9B1A38A0959ED9538
+:107BB000120D8490CE5DBFFC577A1221D54FD65955
+:107BC000245A6F7AF6757DC04488C6DBC29EEF8A60
+:107BD000B7C07BE79FB8772C194CDB5B9BB0FDF3FC
+:107BE000275AB0BEFF57CFBFF67FE87B35AE3807C8
+:107BF000BCF7F98BFBF4F0BCC6AD75B6D292B80FEA
+:107C0000E8679B69E9794626C9844C21ECEFC1DD20
+:107C1000FBF4F67C5A6FA5A3D2EFC95CBD77400E8A
+:107C2000FDAE75B776A909DEF0125242C7FDD5E266
+:107C3000916EA8B7DB08490B3DDFA2271E63022D1A
+:107C4000FB101243CB0BA5268F144FD75566DA02D3
+:107C5000E585DFC4CCF5D2EF6AF5813C2BCC6730EB
+:107C600071423DD5A2C1EF6B5AD7EA6A4DF83DF695
+:107C7000F3071D2150E6130F393B88AE9F9027BFB5
+:107C80001E0AE3FD96101BBE3722A68890390B3ED4
+:107C900091603EB183EB75AB719ECFB276BAEAF0DC
+:107CA000F6610D743C3AEED7F0372E5416594C3825
+:107CB0003E05087E97DE56996187F527191CB07E30
+:107CC000B1BEF46A7793993EBFA9C1ED90ED84BC33
+:107CD00072EEE884BEB4FEAB41D250195E97A5C5E2
+:107CE0002EDA7FADC784E3ACD950463EA5F31D0F15
+:107CF000BB48BF4FB690A41BE97A2AB424C9042517
+:107D000021C77445D0FF53D86E371027A178607F04
+:107D10007DCE531BE9270FEADC6925D0CF16BFDEE5
+:107D20000EE5936CFEF47B8BA908FBB3DC08DF1B2C
+:107D3000C93AF8AE7BE3D4A4AD12F6EBD72584E6BE
+:107D40004D48306B763EEBAF18E034C93317DE2771
+:107D5000763DAEEF737805F7D153B0301FCA6D6C26
+:107D6000BE1AE2067C49D6D312E1EACEA9A478B3C2
+:107D7000C452BAD052122A93FBB076355C5B78FBC2
+:107D800027162796645722212323DF13A580FFFEA1
+:107D9000395DFA001DF7FE573F41BCAD05BC85F1CA
+:107DA000DD67F4B00E81B7CBE013BA0F0FEEF90424
+:107DB000F17659BB84F0A96D2FD52FA5E58546270F
+:107DC000F9544BEB1CFF1E94025580D79E3D319613
+:107DD000A7289CBA047E367F7256A6CF73DBD3ECFD
+:107DE000123CDFC3F0F4A046E301381DDC79434BBD
+:107DF00093143ECF8D081FA99A209DD4D613AF812E
+:107E0000B6973ED6707432ADAFA9260E039D57AD1E
+:107E10000A8F721E3FBD19F0C55A438A63ECB0CE7B
+:107E20008F27F4A5FDD7D69012A0D3F4F1CE3D5004
+:107E300027ED121900F56AD73218FFA6A4950E99FE
+:107E4000F66F1DEF6A83F16E4A1AE390697F0F6641
+:107E5000B66E36D2764F05B13C0570D0359769695C
+:107E6000FDC10ABB854292C2EDC954682783F48ED6
+:107E7000A7008FDDCB6AA0BFDAD4F90EC09308FA51
+:107E8000DFB37110CCB7D6DEC71143DF9FD22E21EE
+:107E90005E118F89C0FC6B297CA13EC53BCA0BF3E8
+:107EA000B9C8E127E0D8A5F32F82F975BD64201E7B
+:107EB000DA3E653CC357EBF856E41F6FEE997858ED
+:107EC0002A08E1A5F965830FEA095A8BE400BE444C
+:107ED000661A603E4BF97C9A7564B18B7E679DC4CF
+:107EE000FAE977B784FCE259A0271B941A5EEA39B5
+:107EF0009E37B3D2E22970517CB8C8F71FD184F6FF
+:107F0000BB9AE3CB9A653EA4A79AE7587F490667D8
+:107F1000E1FA30FC4D2A2748C7BB62C8E24AFA7C26
+:107F20009795956A7C7D8FD375CEE3EB70DF97D202
+:107F30007D877D4DBF9B3E07B851BC00B8D17D44C5
+:107F40003CB8296905EEDBD2BBA55B701F3DC308B9
+:107F5000D46D896C9DEAFE8FF3F5ED8A71154BB4F3
+:107F6000BFA0CDECD829C17C9C9A18A8175A1D3BFC
+:107F7000097CEF7A12C6B3A5C4389AC2F81521AEAF
+:107F8000620D1DE75CB299EDB7F75DED8C7CA04703
+:107F90003BB6DB64E223C87F48AE2B3FF45D453F30
+:107FA000D65F05EF6F6AB3A780E43278205C383C77
+:107FB000BC1BFBCC0DE7A71F717878AF2373816FD3
+:107FC0001CD4139311FAB7D071687FC93B473DB1F8
+:107FD00015E7D784EB3A60B1605991E82AAEA7FD66
+:107FE000D9FAB91A002E629D6A782CE1F0D83F6761
+:107FF00051A106F07896C9017477FFABD212C46B19
+:108000008F911225E03DA34342F703E882B8B5B84B
+:108010001FB5F52E6F74BCAF443AAB4D8A71C4489E
+:1080200088F74E947F1E9397E13D937FB19398BC60
+:10803000023E59991FC90F049F01F906F82CE8A2C6
+:10804000766C200FF6F79BF2952E1DA3F32E0A07F0
+:10805000A0234137E65718BD6CDD682F85F6AD9437
+:10806000EEC3F7FB90DE83F47B28B78F03FA8579A4
+:10807000BACC21FEDED7E28AB752F8D56A7C9BB52E
+:1080800039217E5CFBCA5D79EE28F827F8B151CB27
+:10809000F89CD11BEB65FDB2F18C14DCE6222C3D83
+:1080A000208F623730F8A8FBC9B50AF96AB49CA1E1
+:1080B000727C3ADDA4F87E844CD2B873613E6B8C3E
+:1080C0008143746749D686A01EE6910CB20BE8671F
+:1080D00067AC17F856723271BF10A5DF242BE3038B
+:1080E000625F9A13181D25C7B1F7C75A995E516888
+:1080F00065783991BF2FE62FF0DFAE717F42E4DE65
+:10810000E598F88ECE0BDBC57CE8F75B0893BF38AB
+:10811000DFE43BF3766E0DDB8F101D5D5704FBD45F
+:10812000EF6E9F768929348E90A7EAFD87F903FDCB
+:10813000C07A2A07F7FE5EF33E468F6A7C9CCEF536
+:10814000299395B0F774BEBF225DAD35939D30BFC6
+:10815000EDC49948E755F7DA40460FCE601EF4FFAC
+:108160006682FB19D88FE1E3399ED3E733E8F3D574
+:108170005AE231D03D59BD4BE70D1819CD7C4DFF6A
+:108180001B97C0FAEF361B3D32C5F30F13DC0BAD66
+:10819000B4EE29230E1FC8A51F53FE01F4477C250A
+:1081A000C05FEA48200EE05C2BFBF308DDFF2BB13B
+:1081B000EE25F0FE698D3F0B9E1312407C3D191396
+:1081C0005740687F6D7A5FE67FC1BC8FC86427ED3A
+:1081D000E712714E81755CF26B123C741DA7DADFF9
+:1081E000FFCDABF4AB85AF5E5C783B40696BECA236
+:1081F0004768B9C0A8316A8786E071D21C9DBFFE6E
+:1082000098E385AD89E95DC18D062FC047FDDEE4A9
+:1082100004F65EDDE574E2490C7FCEF8689D36A871
+:108220000715B2EE7216F1D0714F6948756B143DA7
+:10823000F39495F1AF368AFAD1DA4F733CDBA5237C
+:1082400079DB613E2D940F02FCB476E417D5BFC8EC
+:10825000716CA5D5B6DCE021D023820F48C8FF4F52
+:10826000EA18DFA17FB38CC342F213D413D00FAB53
+:108270002D1E9F86F28DEA06B34F2EC0E7DAD1B0ED
+:10828000771E8B16F8E0122E1797D6BFF995144774
+:10829000DBB5C4389A7EF79969591C8885AA1FAE48
+:1082A0004F06E53B654133D22768B4A08F4BCEA97A
+:1082B000F2D7B157D3E7B4A8B723BED0FD9D96E05F
+:1082C000F2C27E2F8867F05EB03ED6EB09E37FB343
+:1082D00038BDAAF16C17E0289DEFC712932BEA7105
+:1082E0005E4C289B0AFDFEC3EC7A16F077C1FA8B30
+:1082F0000A7ED625059E7E04F071ADD9F114EB36C9
+:10830000CB15462F87C5B89735B87FDD85FEBC0DE8
+:108310003980F7C1AC0F289C5777182C1E3BB4EB63
+:1083200015FB7FBA9132BEBC30F974AEFF04620215
+:10833000F83B36033E2CDD124B3C8342EB00851BA1
+:10834000F0BBF632C17E9674BC7902F879AD368006
+:10835000F8B3C468C2FDA9BDACC579902DBACE8072
+:10836000F89ECADFC438E721589FE767A3AD676F5F
+:10837000A00F53E8735CBFFB6D78FE506C1C71322C
+:108380007AF10EA4F3BF64B4C7275078D5E9297EEB
+:108390000CC16E5CC630FD8A649895FBDF71E42BDE
+:1083A00098CF32A35B0FF27EF9DC7A3DD0E582787C
+:1083B0005F896570F8BE8F96BFBEE19BEFFB6ECE06
+:1083C000874EE9295D44A1C3D39C2E26034ED2F2E9
+:1083D000543AA39F5359A4FA0528AFA725FDEE549C
+:1083E0002EAF17B1BABA1F7D02A39F53054C5E7919
+:1083F000D631F9A17EEF32DFEF6909CE20C04D3CC6
+:108400001F93C09EBF98E0FC02F089F2C3BF737C4B
+:10841000F559697F0B5E3720BE924DC13CD8C79E8F
+:1084200075E5F1F926479F57DF04B63EDAEFBF60E6
+:108430003CFA9E13F5F6D762BC608790A9943F037F
+:108440003F5E9749801FD371F50936ECD767C5F7B2
+:108450000CB80EB285F2698AB7DD2576DC97ADA53A
+:10846000143F814FEC3558804F087C127814813FBF
+:108470009C8F09397C33C86119E570624209CA6171
+:108480003DD039ED51CFF4C1FEB8DF8867F237DF58
+:10849000EFBD46B68F94DE3313703C5F7E38BD0966
+:1084A000380B3E79AA8F122F9EE27C70007FAF07B7
+:1084B000CE09ECBDA47E4CEE09FBA084EFFB335645
+:1084C0006529E4D8F0494ABDE4198E6FCF58E3C45A
+:1084D000BE1402BC85FC8BD8EF47D97ED3F786C18A
+:1084E0007A1618828B12A9FCFA01D58BF445F8DDB7
+:1084F0006EF82EC24F319EC9DDBA7566027A81339D
+:10850000C1C2E05F1CCC82FEC8A020F2A12584F28B
+:108510001BE9DAFB073E81344A23D3E298DC9164FD
+:108520003A20D0CC206287FE28BCA784C35B3DDE06
+:108530004968A27AE0EC04497B16F6A89014C27E42
+:108540002D7AEF0BF342DAE5458BD1A3A172E487D4
+:108550001AF73CE8A7F3B623A8F79FD4FBF29A4D8D
+:1085600051DAF5BEC71F9242ED8B9F913D7ACA67E3
+:10857000DAFC9D0FCCA178B9C42F3B60C82577FCED
+:10858000F59DE1A04FFB750EB06BA93E71B796CE7D
+:10859000FBA486ED27A957FA051A38BD50BD4A4BF2
+:1085A0008685F893D00B5612DF00D01F9612A71EB7
+:1085B000CAD36B574C25145ECB4D0DC8B7CEAF9BBD
+:1085C0008CFA7215F160FBD22DBAD3E1F26479B363
+:1085D000B2BE62BBB2BED2ABAC5FF811C3B748BC8F
+:1085E000677A98AD3CBA7EF118A7B70BFAE8EDDBD5
+:1085F00038DE96FF6CEA4348FF7E1D31503C69D857
+:108600005B9A42A2BC2FCABACBB9C41B268742FAD6
+:10861000471EF10E85FEAEA03F10FA013BB721C602
+:108620009902F6C885B2E8F37880CFA3EE729F5E18
+:10863000FA8DC37E2FE45E7D9D75978DF85EE4F71D
+:1086400026EC97EA5951BFFFAD805342F4F65FF72D
+:10865000CC2F15E562E83BBB4AFFCA40B95A77D92F
+:10866000A290D3A1F6242657B99F80EEAB07F562FE
+:10867000AEF7518168391B1BE263BA3E6C3E826ED5
+:108680003E9588310DFD6AF7723BC25100FAF1A7A1
+:10869000A07F01DD4EB4BF16A0535D7AFBC83C6DD0
+:1086A0006E88AED4EBA1F8F879204C2FD89F604E9D
+:1086B000C2711DC401E30A7A58745B45BC9BEEDBB2
+:1086C0009FEE284F710F0EC73B0F8E5FAB177A9F3F
+:1086D0004921C7894ACE2F6D3F827ADD32A32B0F05
+:1086E00098D39FF7DE867452455CC9401FDD7B0737
+:1086F00066B9FF17F25DCC67A6E7561DD3E3295094
+:1087000029DDCEE0F399D9C1F44A8DD1A9C3719C7A
+:10871000C46E4946539DCD9732592DAD8FE9993F8F
+:10872000381D0919CDE72FC1F714BE63784996B8F3
+:108730005361DE0618978E1743BCA950368D74D846
+:10874000A11C27B9B46C1E5EDCE709A43E03DED78A
+:108750001803325B279D41327CDF032FAC9B797D70
+:10876000D3AC4B8B96C3739319F98F9ECF434EA412
+:108770007C7310F22523ACDB60F29D87759979E953
+:1087800029637ABA2797389AE86B7D482B81714D17
+:10879000A68B1E58AC855824A8C7582EF9C05EB9C0
+:1087A0006831793443909F1A12819F4A6F57C1BE36
+:1087B00050FECDFC57BDB56B7D682709FE98C0E71C
+:1087C000D7C4F9631A61704822AE7D4E8AD7F799F3
+:1087D000ABA6923810E36E1C7F47DCA4C3305F0069
+:1087E0003CCAF949DAD3E172C6E6D22AF85FCA5C1C
+:1087F000653DCDADAC1BC9490BE8A392CF95FA7589
+:1088000022DA7F83C09FA3E3FC66561F362F813F89
+:1088100079899CBF733DC4C5FD01B5097A827EC4C8
+:1088200064A3910C41BD242F91F9073EA63B4DED69
+:10883000C620F2F3C271CE010F50386F7E4F76DC46
+:1088400049F769B3D9BE510BFADE3C89E9F7DA562C
+:108850001FF8875A16591D5BA13DC679CF3FA1FD70
+:108860003D9980BE55077EF94478D1520ADFB56440
+:1088700059F0BDA4F220FA53837711D4A722F0F463
+:108880000A9D3F85F713880CB49F6596D5CFD1F725
+:10889000D35CB10E29ACFD4968A7F394385EC0F3F0
+:1088A00071C3C0FE657FFD3A0AFD4EF06F386594D6
+:1088B00087751D856F98E83CFAB90B1D80B6FD3BA6
+:1088C00078FC25C9E065F1074AB5741EB38D6C1EAE
+:1088D000751DA53797D0F6FEFEA104E210B187ED15
+:1088E000F36BA04943ED6EF8AE2C16FD5EC7B8FFE2
+:1088F00089707E305C456FA342F88FED85A24ED51E
+:1089000006E730E6D6C07A12A30307117F8C3E6FCC
+:1089100024A13FF8BE3CD41FF2A3F1A1E610BDD1C3
+:10892000A515191D4D35F4BD839513110FEBC0EE40
+:10893000A2FB315CEBDB07F43D8A9785BC244B9AA4
+:10894000119E5B37FAF6EB72C0D5E292A13ECC7273
+:108950005713F43746F2619935F7DE2640AB7DA018
+:108960009C217EB92B801E3757100BE85F4D231CCE
+:108970000E0B6D9A3397F96767CF357AC1DF3F5B8E
+:108980004B585C4CEBCEF901A5AB1F2C607E61A867
+:108990002F08F3BB8838C8316AC7EC8EA20FEC4BA6
+:1089A00064724A7C5FB749AF8837ED4D3461FB1381
+:1089B00089133C89A8A7B97380FE3627727D6C1095
+:1089C00019047C258CEEB722DD97BED51B5F50B60F
+:1089D00073BE30DBF90B1DEAF19C3F083EEC023A16
+:1089E000A4DFF925A70EE0F7611983FFD1D295C85E
+:1089F0001FE610373EA708A27385FB9B2685E94337
+:108A0000749CD92EA57E3467AEB22EF0558C3BCF28
+:108A1000AD6C9F21F4DB494AFD76C17F5DB1A21C9C
+:108A20004C797ACDD7D9185F413F411DDD27165FBC
+:108A3000D1B278CB26BD17F4A4BAF6B5076D40477E
+:108A400077104E47BBA56518FFD92D2D0FD323FAFC
+:108A5000D67825E0FB03E99AFCB8AF418C2B1DD3F7
+:108A600079F741BCE5D84ABA623ACF37F42C6E792F
+:108A7000208678C06F2DF0D33C83F95D291A63FC02
+:108A800024C312EB007CDAA229423FED9638B323CF
+:108A9000DC2FBA7523C5BB30FFACDDC0428CC77A72
+:108AA000B17F8F24323BE74189F9C93DF38C68EFF0
+:108AB000D9FAB91471099B4C4E80BFD19368473CD9
+:108AC0007A90FB4320AE3794965E89E9333DDFCB45
+:108AD0006413FA2755FCC796E8C0B8802D3E1FFDE9
+:108AE000FB733B0A9F447E638A710C9042FDCF75F5
+:108AF000B7689783FFA0A345BBCC14C2BB93025FAA
+:108B000063492CE06B8FBFEF0503FAFB7EA871056C
+:108B1000002F6BF4BE02A2C4E7C0D5E4D80A8E2FA2
+:108B2000BA32D7BCE5743EDDEFE899FFEB0E82F474
+:108B3000FAE21E2BFA2BB53308CA934DA504F1A116
+:108B4000BB4542FDED336B35DA019BA46694135DA2
+:108B5000091370FF56990EA05D5BFDA8EE74B8DE98
+:108B6000B5EA49657D35F1A35D5DF35C043E23FF05
+:108B700012FCB1B64DF91DE9AFE48F859CEF17B932
+:108B80001C332B60EA731DFD985D4D7C06BA8E92F6
+:108B9000B7F5DC4FBC80C94DF2B404FA56B7F99C66
+:108BA000CCE89CF1E312DE9F5A0E95707D6A2CE5AD
+:108BB0005B607F0AFD88BE8FF5039A0E3955139AC4
+:108BC0005731FF4EE865826F8B7D291D41C8088AA9
+:108BD000F7B9497C5F73492EEC2BED1FE901504238
+:108BE0009F80FD7BC06E1BC5C7A3FBEE0139EBD197
+:108BF00018BD80479BA57AE4D346C2F9B5E446BECA
+:108C0000FC3B8F4706B88E24F533A7D2F7461BFDF1
+:108C1000B1000F8A0F7949B6109E34115FD66E49A4
+:108C2000812FD8DE697D2B2ABE08F9E2FB90E91777
+:108C300053E88AA19F0A08F8D0F280C4ECC289A642
+:108C4000FBB5F0FD5B9AC9880F9388570BF3ABB067
+:108C500028F77962AAB23ED91E8107328CEBE4F084
+:108C60009C3248D9EE147C8D28F95A0EB982FB4CFF
+:108C7000EE3AF443F00BC46E208340EFA01A22D2E8
+:108C80009B9A1F4C4AEA355E3229294ABCA49BFBB9
+:108C90007F6F2481AAE7A4487CE93AB8414E0DC30E
+:108CA0002B81C7AFF0FC0AE9751E972D66FEC090B8
+:108CB0009C67F8328CD76E047CA3EFAF1478924D8A
+:108CC000B2014FC6B4C7F8640AD742DECF8D8037F1
+:108CD000452179EED398ECFA5CC00FC716598ED4B3
+:108CE000DB9313EC882743354EC49312E24884FD8E
+:108CF00019616C6DD2C2FCF70CEFEB3629F0620DF6
+:108D0000E28544F102E92A422E2ADB557823F6EF68
+:108D100030D79727124F7F188FB2B103A02FFB7265
+:108D200018DE541027E2C99BB99379DCDAADC57E11
+:108D300088521E961B9578A0C62B3AA2267C5C35DD
+:108D40009EF58637D98037421E265E1B6FEE49326C
+:108D500029F4EA30BCB927A9A477BC51E38BE027FA
+:108D6000BB632CE5A097D6554BC88787BED3BF09F8
+:108D7000EA03D7E460FECB6EAB03F5D6BA7AD65ED3
+:108D8000EC77CA901FD3AF81B7E7B8CAA15EB781AD
+:108D9000C5294A8EB1FC99FE77B0F6C23BEBDF30B5
+:108DA000837CF7B0EF5F39BF598EA3EDDECDFCFBBE
+:108DB000D2E672A8D76D61DF7F067126BABFC34EB7
+:108DC000789BE0F97577E73898F9C9F4D9711C4FA9
+:108DD000774B2FBC81DF35B3EF561C32F621A80745
+:108DE00033BD752C5FE7B847D93A933EBD69929D74
+:108DF000E2EFF2A007F5A6B39A9A61C86F7AB13391
+:108E00004BA5E60C2829DE209F711A295EE7B238AF
+:108E1000E44E3AC45B49CC9F21E277904F109E3FCD
+:108E2000F0561293F7E2BDE404C2E2CD0F9BD11FCE
+:108E30002CE28BBE87880474066BE4F23F6ABC7137
+:108E400062BF7A8C334ECC1671C68076091DB7F09E
+:108E5000EB2F2644F3A71C4D627AEA399E1F219E10
+:108E6000577B73348017BB0149D20148F5BF07BD5A
+:108E700009FDAF4C6878C808D857560F24D56CDD6B
+:108E8000428DF4159A7AAD07844C16B5BF68D7D3D6
+:108E9000FDC4171F1739FF895AE203F944B46CFE69
+:108EA000554D540E4A21BE345BB09DD103904E67A0
+:108EB000F17DBA28F8CD503214F8CD6CBE6F3F303A
+:108EC000D6EB98BC6CD6A9E8FF2F48FF3B7AD59B20
+:108ED00095ED2AFE50CDC7ADE2FAF24A1244BDE04C
+:108EE000ACE4C5F2DC0EA62FAF361D43BDA2FB617C
+:108EF000A627D69000EA1D6AFFE1EA5DCAFA9A56F3
+:108F000065BDAE5D59EFCEF7E038DD3BD60C03FF13
+:108F10005DF5F677D02F5C2DF88457C927A882C459
+:108F2000F8C443D7A3DF4663A47CA218C0D507F3D7
+:108F30004D86126722F00310B25FD3FA5DF0491A32
+:108F4000AD6B5C093694339312CF88F1658CE7BE24
+:108F5000E3B487F6A5C72E54F18942E18FE99F80DB
+:108F6000FE2AC1370AB95E4226A9EDC6FB91FE86EC
+:108F7000F25ABE8DFB53B8DD23F40CFA3DEA197E9C
+:108F80008DC9ABD184EB155EA4C72223951348424B
+:108F90000E23B3579A896A7F0B6D57B79B94EDAA3E
+:108FA000FD1776CB30BEFFF388BB2FECC72CE23A1F
+:108FB00008F2E1E887D50A7BE9C33F4E10FE14B4FE
+:108FC0009BBEBDBDE4FB4EF652CFBEC750FD919691
+:108FD000E533260F7800E2E36D3198F75927B17D2C
+:108FE0004E9E772C2BDC7F78B491D8B46174DF343B
+:108FF000D96084F860938ED91333A69C1AB6248C5A
+:109000006F3C6F2C9D0DF0DA2CF97FF411D81747C7
+:10901000648279351D36DCF74BCDF439C5B74B8FFB
+:10902000DEE0F0D0C717742CDEF899545F05A95024
+:10903000621E551B7E1FA3A5726C85EC7D2D00F171
+:1090400055C9FB720D6D3BAE772F85FE576B7C7A51
+:10905000E6B7F3639C54F4DFBB1FD2837C4CBF9F05
+:10906000C9C5A0D4C7C1FCB89EBCF078D39264E651
+:109070006FFA30C15507E308B927E20927D74E8CAC
+:1090800007D1F02571C6439C53D242CC2E723CC806
+:109090002BD814E6573E19133D2E70878DF1579843
+:1090A0003EF0F734ABF32736E0B7DCFE3BC7E35DB9
+:1090B000E7E258FC6B8B8DC9810EFEDDE3BC3CC73B
+:1090C000E363E7129476A378CFCBBF3BD368346ECB
+:1090D0000ADB4FFB43867A2FE653F1FC9106C2EC84
+:1090E000A43DD696AD61F1D0676DA51D000F5B3F25
+:1090F000A73E0DE0B787C961884743DC78A4C5FD6A
+:1091000020B4D7DA8913E2AEC41ED0CF84F823D8B6
+:109110009DA83F307CE98E61A598D7B3B6CA0E589A
+:109120006FF7DA00EE674FBD92F1C7676D2E1CB77F
+:109130007BB668E7F56D01BEFFCC7F20FCD9BDC5CD
+:10914000C3D4F12F2A38989E1DC3F8983AEEBD502B
+:10915000F0311EF75EC0F9D0C20EE61F5F64249B9B
+:10916000FBD2F6C51D29CC5E8CF3E429E2DE9ED845
+:109170006F95EF20F0B33BD3DF13AF7D382C5EBB90
+:1091800086C7FBD688F5B529D777C4D66BBCF688D9
+:109190002D4ABC569D17F032C8F7FE2178AEB3B009
+:1091A000F557C835E57AE013CB08E691AF3BB2B48A
+:1091B000C948EBEBEE02CF1FFC317D750D87576F71
+:1091C000F3B3B934C4AEF013F721F630BB38CD9DFC
+:1091D000A0A8A3061C9687D9B73A5DF17D667DAE3F
+:1091E000E2FDEC0DD72BDA733C458A7ABF2D372A86
+:1091F000DE1FD05CA6A80FDC7E93E2FD42D22F1EBC
+:10920000E3B18765F09590EBBC3314ED37ECBA45CC
+:10921000F1FD67A4FEC1D1F4BDB618260788C7E9E1
+:109220001F3C2C94779CDFBA44F17D93D43ACC4711
+:10923000DF5FE667FEF621EDAB14FD5D889BC0ECB9
+:10924000081E7FACA7FF181FB7CBA80FB54BE46172
+:1092500029321E59DD71EFE6BE2452AFA07F28E708
+:109260005751390F7A945ACF30279B93101FD24908
+:10927000FAD7617415C20313EA61971E95D19F5600
+:1092800048063E341AE1A3235E7BE47E5D22CCCF08
+:1092900073E939B303FC652B8E2C45FC33A42AF10A
+:1092A00020C6AEC483D8414A3C303B94FB1E3F42AB
+:1092B000B9EF6A385B9D4A3C107014704E9CA4C490
+:1092C0000B01DF11F41FC0B788040F619EB5577200
+:1092D000F84894786F7B0BAEE35A7ADB70153C87C5
+:1092E0001E703699104E2CEF4AE84906EE9F56FB49
+:1092F000CD85FE313199EB3DBC1FE1E7DE2C795085
+:10930000CFE989678DF065F97240DFA927CC5FE26C
+:109310009A926C8BEA57C3E7BDF9D5041C853EB31E
+:109320001AF4193ACE72E246BE7486EB332B4CF730
+:10933000635CF0C21F197CAB8917F9F5B78D978371
+:109340009E48C2FC8D6A384A1D92CF0C74C0F976D3
+:109350003AE9107CDB8D791314ED8CC314F105A56B
+:109360001E4A9C52387F127AA9184FC053F02D31F3
+:109370009E81D4CBA940072A3E4606A9F554A5DF15
+:1093800043F84970B0B038C6F09EF804B313437E7A
+:109390002FE6E790B3739A08E8DF16E1D7F0CF879E
+:1093A000E7C2AFA1B6EFAF15179DE991028FE44474
+:1093B000C643457C952EF3D38FE8C7A3257B268C27
+:1093C00037E3958136A289E697739C7895F6236BEF
+:1093D0008289E1FE32E1BF7E530AE0BC7F409C3FC0
+:1093E0002561FA422D699D303F07FC9F546EC541AF
+:1093F000C9FC3EA45DAD97B278A286AE04F07B3581
+:10940000098B17E684DAB12E47D6459ECBB5E4FB2F
+:109410000D2916EEEF60F93984F33761BFF5662F39
+:109420008978FE413D85495128AFE5E5646E6716B0
+:109430009002E89FD2D52BC9689F533A94C2E9AEF7
+:10944000270F06DB23E84EB57E11CF97CDC5E87711
+:10945000591ABEDE6F000FA147FC8BAE0DF6E7FE7A
+:10946000643BD6D7F439F907273417FB15F98C7507
+:109470007A963F4C5A95FAF3C7C91AAE4F38E56F42
+:1094800002A7DEF781E785F17DF8A6FA90C80B13F5
+:10949000F03B23F86008DEE7147CACC76EEB81F785
+:1094A000B9687C4EC0E36289FF69D827D97C2C1942
+:1094B000E0FC0FB3EB22BC9F79227056D284E655B4
+:1094C0002177623EE8A57619EDA4DA312C4FA87613
+:1094D0000F06CD49578701E382D5ED6FA07ED6D91F
+:1094E000481969FFDEE1D4B35E15BC7BB357C47A7B
+:1094F00074294A7C13F922749D312951F3017AE0D1
+:10950000A06CE77010794A15F2E0F840985D728817
+:10951000EF7B8CD6159F42C72F7E3F230EE0532151
+:10952000771C4A07383448785E699C8178C0DF9F91
+:10953000C6CFAD8D08D43B2C141EA919263C7F3410
+:10954000F087B20BE299A71AD627C0F9AACF1BE978
+:10955000D0D4EE1828695C886FE4858F7F5C0C712D
+:10956000B60598A7BCD0C0E2FF393F8AF5F5A37CC9
+:10957000E2753D3102BDE972EBF17C46D02AA3BD14
+:10958000912493F1805F02CE49B16C1DE279E963C9
+:109590004F4A90CF249E8F6B0A0E5D07F94CB0EFB7
+:1095A00025A1758E2B0F0EAD3785E02CF204893680
+:1095B0009835238C3E8E7078D4DAF49B411E761950
+:1095C000B91DC8ED4162D1221F69E0F1F69303A8ED
+:1095D000458AFDF8CC9097551BE38C1F0EFE2EC8D4
+:1095E00027A0C5971667BC15D76F47BDB981EB5744
+:1095F0005D3CCFBB6172590AD853BDE53F4D4D610B
+:109600007A7E0D8F838BE7355A1FE62DD540DE71AC
+:1096100058DED3B7CD3B16F9E6BDC2C1AA255A0A1A
+:10962000875A89B8AEF6DEABFF92A3DABBEB5334B0
+:1096300057CD835B952229F2DC6A21CF8D3E6AD813
+:10964000539A42A2F4D7236F2EDFA8C8271379D2EA
+:10965000B597C7623E59F9CF3AF19C20F46337853C
+:10966000F2DC7A83F3916406E75AC80F1B1AFE9C5A
+:10967000E151A8FF24DC875F0300C1DFD12EA35F87
+:10968000F6D7873593764699EF76BEFEEB6D5AA4F2
+:109690008F1B7CC4D912657CF19E38470270AECC1A
+:1096A0008F9C5F5B596011CC1FF257A38DB795E378
+:1096B0008B98775B42A08AE3399EE3E8A95B94FB31
+:1096C000F80CDFC7B69B0259781E6972F47C7AB138
+:1096D000DFC3B4F512C02360761F44BD730EAD0C1A
+:1096E0008173003E0DCBA36274D6DBBE87E0AD5123
+:1096F000E41546C25B8FFB2CFA1376C9F9ED32C62E
+:10970000FDCF1FE574499C2689D2D7AD5C6E9D279D
+:109710002C7E70BE59427B64899B900D94BFDCFA0D
+:10972000E46A8CDF543D357433882B787E07E5235B
+:10973000B7A6123296964B3629E3B7CBEE8E88D772
+:109740009070F948D54FB4AFABEE577E574DEEFE53
+:109750000BE83FD52AFD6620F777ED4DE1F6C230E4
+:10976000320CF8FBBAA7BED043EA6E6FF8FE39A5FB
+:10977000EBFE5AE083162CDF4D711E003EFF718A0E
+:10978000FB4DE0DBDDEF31385CAAB9C4F8FEA3493C
+:10979000286F0CC09CE9FF1AE6B338ECCF28BB80D9
+:1097A000F89BC1C0F41BA1D7C9F27A398EB68FFCE1
+:1097B000734302EC5FD2B3132781DE6F7B36D60989
+:1097C000F0DA5AEA2C043FC0D64A13E633180D2CBF
+:1097D000FEEBFDF5C8FD100EE8DF7A6F19D8A196F3
+:1097E0008E7D3EF0936CD1FC05CFA16C19CBF2DDE0
+:1097F000C438751D95BB613E59B398DCD89AE32CEB
+:10980000B484F54BB89E56CB61D6BD77E03D70FE73
+:10981000FD91C3A826D3F5E5A23FEE7AC2F653E444
+:1098200055C1D8E1FA6827953F909C27EAD7B74AF7
+:109830003E1D5DCF9AB6DD18C7A8B9D3973C1FE48B
+:10984000CC335A8C0389F925BD9E5606F11E215F43
+:10985000E64B1694FF42DF9E47C41F8B17CDE57879
+:10986000308FEBD9F363197C971047167C778B9177
+:10987000C4819F7A7E796B09CA9FD53A2BE835223D
+:10988000EED1BB3E10DD5F54FBB4999DA795827964
+:10989000D0C9E7D4FE20CC6F14F57C52522AE3AF36
+:1098A000B5795CEFEB4F9C1067AB7D6D600BF805F5
+:1098B0000C7D583C96F21DE38822D47B8D60CFACA2
+:1098C0007C35C6C7FCD65E7E6ED6590879217533C5
+:1098D000328A303FE104E51F66388F18C8423AA546
+:1098E0007C45A2B22D7FBB65AA16CE0DA653BD8ABC
+:1098F000D6E7A7664DD5527CAFCD0D546968BD69DA
+:10990000FB7056BF3E7016EADBB697B17A51A04A9B
+:10991000A6F55DDB5DEC7B30F02862BDB47DCE54F6
+:109920000FE813562EAF1D013C475CFBCA404DB8F3
+:10993000BFB22595F1A5CFB9DFF5F31CB27806C00B
+:109940007B5000CFA989F77E9A2AF45C96E72BD644
+:1099500029BE23A9D1FB1F9DCAFCC42BF9F9DF71D5
+:10996000B1644B0C8B5779E228FC0F740CC4785B04
+:109970004E6A028717EDA738D48F80A3E84F8CBBBF
+:109980000AE42AF05B1DF39B8AF6C9A98C3FD271C9
+:1099900036E1388319FC6B676414C2BED1FDD2F284
+:1099A000FDD232FBB385CD8FF66B2D40FE3E14FC0D
+:1099B000DE07AED0F77342F356E3C70F387EAC6CC8
+:1099C0006271C6A0B51FE2D1B858A6EF9162E53A20
+:1099D0007671F8B5A45A997DD5B31F29128ED3C4D8
+:1099E000E19841E19EFFEDD75DFD3DAD3B6CBF9C35
+:1099F000709EFF40FB753BC3D723F2B6453F9F6F78
+:109A0000547D3782E54FD526F4C3EF7E16438CF89C
+:109A10009CECECF92EA780E999A07F8AFB1D886752
+:109A20002C3A0B6A38D7E8B9AFA195E711F677B2AF
+:109A3000F3CA33A616F3F559F8FA2CC6B07B1A7A96
+:109A4000E8F158306B9639127F7BE0DED3DFE022FD
+:109A5000DE9F82AEA3F507F4D1DB7E3CCCF1E3DFE1
+:109A6000B61F629E2A78F6C059353F014FA067FCA9
+:109A70006EB0121FC53CB7A58ABC61155DE77CC7F7
+:109A8000F14AD9776B6EE3F9C076253EAF69CBD149
+:109A9000401C5D7C37097CEDB690DF6D6F2AB7DF27
+:109AA0003248462F7970FB52A3FBEBF0B9DA7EEB1C
+:109AB000B6B2FC67B5FFA0DBE6F0C3B93ECF457692
+:109AC0009E7D944ADF8038CC0BA6D0772179A2AC5A
+:109AD000C7A531F845FA838278FEB6D850F6A2DDE4
+:109AE00041C847DBD7207F2E8E2F5B9F43EB81ED54
+:109AF00075ACDEB7EC8B1CCABF4F6FAF67F51BCAE6
+:109B0000BEC8857AEA5A561FE77C51C608C2DAA950
+:109B1000E3D342FAC3A7A976A67F946B08E09141EC
+:109B20005EEB003929E0D95B596CD0D447D34F3B69
+:109B30007BE899C5294670F93C42D8E701ADC23EA1
+:109B4000EF8E63E793BB419ED2F5FE3DD5FD975462
+:109B5000D053623B17E5D0AEEE8CFD580FFA90E47F
+:109B6000A4FA06F83BEC16B200F2EA3AB7BA403F64
+:109B700022AB1C462DC293FB9FE8DABEA6FDBCFAC1
+:109B8000DA33B7F765C3B8601E2339FDD7BDF6D504
+:109B9000DF204E5AF7B9C901EEBD911D3BD6837E39
+:109BA00035B2E3ADAF98BC65E735C4BC47821F91C1
+:109BB0003E1FD16EC0F98FECB86E39BC3FEAFD8E06
+:109BC0007E801F634EFA9A801D74EFFD5D5FC5397C
+:109BD0000DF299F45DCE69F4C0E3CF54798A4778E9
+:109BE00024A6D9001E57305FAACB76747300F534D3
+:109BF000E57918AA97639CF512E9E380788138F734
+:109C0000ADF65B9EA8A4EBA3CFC704E90CC2F4E5B4
+:109C10007197A97D1FA6679712ABA25E6E4C53BCCD
+:109C20005F61C951B44F4CBD4ED13ED95EA8A84F1B
+:109C3000193452F1FE3447A9A27EF388C98AF72B62
+:109C40009D958A7AA1AF55F1FED0C3EDCAF6637631
+:109C5000DC87A1275DE5A0C73BFCEE262887773689
+:109C600097C7DB4984BFB638E06D82E7A3AED497CF
+:109C7000F84894732CABDCE8E78F38C752CACEC3E0
+:109C80007769D8390EE19FBD12EB9E9486FE590A82
+:109C9000760AECB1C66022EC57C5E26D983775299B
+:109CA00048D09FD5A60FFC7C14C8F98532EABD6D5B
+:109CB0003CDFA66D6EBE177C7A27A4C0CB10AFF731
+:109CC0002C64E704C6500D17D70DB14D09F6C9AD88
+:109CD00058772959A9DAA7B58A7A85E536C5FB13DD
+:109CE00053372ADA27DBEF52EDD3BD8AFA34C70E99
+:109CF000D53EB5A8F6E91945FB9833812620A37116
+:109D00009D1ED94CE77FE389E672D89751273D0B1A
+:109D1000815E8A7DEE2660872507EADF80D247EDE7
+:109D200029F053ED6F4CC5F240A31DFD4C871A0777
+:109D30006179B8D181CF7FDF3802CBB71B9D58FE48
+:109D40004FE3242CFD8D2E2C5B1B5BF1FD171ADBE2
+:109D5000B1A410CC04799194D8730F4326D8F35D45
+:109D60009A402D4452FF3B6D1FF2C5AE3E812EA896
+:109D7000DFE9791DF9E24A30A628BDB54049F7F37D
+:109D800067E94E299D96DBD2D873919FD0AA7116B0
+:109D9000827E7D5FDA91BBB59954AFDDE84AB55854
+:109DA00059DD48EBB8D998A775E46EE768427E03A1
+:109DB0002203832647A642BD3B86B56F4B3B82FA02
+:109DC000B58823CF0AC591EF03BA57C7917F73CEE9
+:109DD0006E067FCAD12B03CDB0AEA3DC7FE4248511
+:109DE000BA5B6959AA2DD4815C3CA1D2234459A7FE
+:109DF000297D04FA6DD53866637EF04D3A02F9E8A4
+:109E00003324668FF6E881E94C1E754F33A0BD738D
+:109E10004CE35C8E794F52F07180D78B3B3E44F817
+:109E2000759B83590087DD3B4EB0BA2DF8B8E40826
+:109E3000ABEBD83A7FBDE383A91E53D4753E9F1682
+:109E4000255EDE96C6CFC7FA9C99207F45FD58A5B2
+:109E5000730DC88963A5CE01309FA32E03D28FC78F
+:109E600065F642DE25D13A4B6687F9550AD275B8B8
+:109E70008E597A4667E41639EAB9F3A9E94CCFC29C
+:109E80007D037B6E5E2CEAE1C734D1CF8D2FE3F0EA
+:109E9000B9D027BA7F65793A93836533CDD85F7798
+:109EA000430CC671BB5D03510FEAAEA750A2F4D1BB
+:109EB0007DAEFEE24BD86E10212E8C57CEE77CEAA9
+:109EC000371DEBFF7A9CBEFF7143AC0379B8E57A8E
+:109ED000944FB7F09717261A516F593823B30CE4F3
+:109EE000D27C1EF75A64D62663F84B6BD5C39542D5
+:109EF000CB4C859B41FC572555EAADB45E9DB176B0
+:109F00003394ABFADFAB87A39A3583776F06F5718D
+:109F10000D25AD12B49702EF34D2792DDE20DB99F6
+:109F2000FD24CE1FAEFE567916020F8FF17C190A62
+:109F30005FB40BABD225855D52C5E1F5651AD7DB61
+:109F4000F249FED7CA78CE65C093CE85EFE4F5E23C
+:109F50007757B673BDED0F7A36AEFADE0A31EE0AE8
+:109F6000BEEFC7F4C429811E778B19F1A360EE17E9
+:109F70007796D0F517745834188F177CDCCFEE0F16
+:109F80002B39E3463E37BC33F0F4718278DE0E7431
+:109F9000722D3935D3B311E5C3C82FA9FC01BE78A2
+:109FA000C5FDF1716C4D8A7A2ED3D758CDF9633D3A
+:109FB000F2B5038D1BB07EA8D183E5E1C62D9C3F91
+:109FC0003663FBDB8DDB397FF472FEB80B9F773491
+:109FD000CEC5F2B5463796FF30BB32D3812E8C6E9C
+:109FE000CCD33CB8C3406488377418104F29053C63
+:109FF000FE4812E4C1182C70FE4E9D0FA3E6B73D3B
+:10A00000FBDF16712FC675304E4FFE0BE867D9BDCA
+:10A01000E3CF516237033F294DCF9C06FCE3A8DD17
+:10A020006E06BDB5EC615AA7DF1E75DACD3A5A2F20
+:10A030004FCF6275B7DD6CA0F5F10FF3BAC76E8E26
+:10A04000A1F58AF46CF6BD9760B0FAA6F4FED38051
+:10A05000CF9612E900D043B931673CA4CE56584A96
+:10A060000F001D4C4CBD753CD0C19E343BBBEFC2B4
+:10A07000BEF100D4A70C6AD1C2911BA7A970137CB2
+:10A08000579654A985EFC667ACDD04DF4DE87FAF76
+:10A0900036FCBB4983776F82FA54478B16F4C13D77
+:10A0A000692C0E2AFA1175D12EF8ABC8D71AD2E155
+:10A0B000423E5ED0EE423E2EE05236ABF2A7E0A723
+:10A0C000AB6B972C12CC6396D41384879CB8DA2B95
+:10A0D000945A289F9D973EC4BC917E5707F51BB1AB
+:10A0E000BE6D6374BEBB283D8A7CF980D329C84D00
+:10A0F000C88BFE40CFEEF5780DD687FEC35BCDB79B
+:10A10000627F6E33C8D703694C4E1EE6E5655EFE7E
+:10A110009397751A6735C8CFBA741E4F8CA4EBF5A8
+:10A12000E98C6E55E7057A69E774FDC3741E5FE636
+:10A13000F727AC21EC5CD1B5F2B65686DB6F3990CF
+:10A140009FD37A08F246D579103570DEA85F643E59
+:10A1500030E58B2CFFB15D9947DA637FF4617C0FAA
+:10A160008E3182D1F1F3DED77DDF35D67D5FB475D8
+:10A17000AF242CCF59BD0EE2B6216D89BCE7C8F5DE
+:10A1800004A2AF27621DFC9E3E55BE35D58376C224
+:10A190007C2A169B09F86FC2F9C4F1ABF00935DFD0
+:10A1A000F977F1B3ABF09BDFC13CD5FC469C7B5605
+:10A1B00097429F83F352907707F7BE809F7E63B2EA
+:10A1C0007B3FD0477759F06F1AB0CF92028867690A
+:10A1D00056F741E85FD2B3F8BBC8673DA7F1FC165C
+:10A1E000F4A2F7D25722DFE902E140E9F108AD839A
+:10A1F000DE33D2E27A0BFA238318FEF496A7799421
+:10A20000CBC5C89228F215BB5BBECA423FD635F01B
+:10A21000BD373854C8A303702EE0D2885854793A19
+:10A2200025E2938A20EF3A19F588CE4CBD16CA7FF5
+:10A23000B79DD8999987FDABEDC5CEB4114636EEE2
+:10A24000844950B6EBDDDB6F053B69A401EDA477D3
+:10A25000799EDFF4D35792405E4D977DC90552A495
+:10A260009DD979644199BD20D2DEA4EB1B0FEBBBD5
+:10A2700096DDE932FA13008C6AFBB366C3DF08E4AB
+:10A28000478FDA7085C0FD65D7B647890C6CA2E8A8
+:10A2900084E30D284BCE38311D67D8B9FA37A01C9E
+:10A2A000F92533CFAF955774E3E5D637D831F1C1EF
+:10A2B000CA7B1746BCC5EC555E46DCEBB6CAA3CCE0
+:10A2C000572BF595601E851C8883F2A21440BF971A
+:10A2D000AC61F731887B18A81D9BD3D706762FCBAE
+:10A2E0009B1A07F9467472153FFE70D1ED48F7319D
+:10A2F000A8FFF4D8B12F69304FA04DEB8C1F037627
+:10A30000EC86018E8DB4FE27BFED8157695967F940
+:10A310001B09BFEFAD66C32545BD7363E8BE20C80A
+:10A3200087AEF9978C72A786902DB05F3564BF7E9B
+:10A330005D981C24AD7FE981FB10CAE72A017028D3
+:10A34000078DD39DF4BB4A6E6F107217AB733B8BB6
+:10A3500078CE4DC3BA8DBFEF59C0DA3345FBC2E9A1
+:10A360004E3A4EE500D1DFDE69584F1375DEDF75DA
+:10A37000A2FE007B3F477CFF12ABE78BF1DF67E378
+:10A3800099D9FB373D72DB74E00382BFBBFA2AEF39
+:10A39000F9A1FC7E565FDB55F34A94ED5C1E887B89
+:10A3A0007D2A7E3C39F61DA0E7560973E06AEED09F
+:10A3B000A17FFB42426B41F839659187E22A373B26
+:10A3C00041DF5BF3F2C09D32CFCB017DE37E9E8FF8
+:10A3D0005F219B301E71E96EC6E77BD3D7AA36BCDE
+:10A3E000A2D8CF88767EEF3206EAE87817B7A56064
+:10A3F0009E3BE9EFC778F8BABE92B8BF11CFB98AD1
+:10A40000BCAFA47EC409F669D2EF62D8BD9667FCE2
+:10A41000C87FAB7EC7FCBD6B76BC81726E896C4712
+:10A420003C7E27C7BD01E0D36566F717566D780DF2
+:10A43000E9B5299BEB0996E0E070787AFA72B91CCD
+:10A4400082FFA6BE255785BFB2FD7B86BFDACF2C23
+:10A45000CE49AFFA96F9695D66160775F07D3AAD9B
+:10A46000B10FE3F07A1CD67371B93FCF2A43F2B033
+:10A470003F99E51DBD5D0276D0A57A33DE77B460E5
+:10A48000FDA982F0F329A254EBFF9D4047B610BC12
+:10A490009E8BC4EFD66BE077EB7F12BF53B401BD48
+:10A4A00003E2A627D8FD63C3FCA7F5E1F92EFEBEA3
+:10A4B0004CEEC6B7B338913A6FCBDFD7CCF4241E3D
+:10A4C0008F5933E3EDD1108F11F4302E96B4827F83
+:10A4D0009DE2B583E3B503F05AE06F282E43BF8BAE
+:10A4E000425F21FC25388E80D3079170FDE81A78F1
+:10A4F000FBD17F126FDBA8FE8B71CC9762D07FA25D
+:10A5000086F3BF385C05BCE333AE0EE7F88CEF078B
+:10A51000CEF11976A5FF81C3BB37F9A4DE1F31EF59
+:10A5200028745AF25DE8F4E7999C4F6903982FAAC2
+:10A53000DEF7E48C887D4FCFB8FABE2BDBBFE77D1A
+:10A5400057C34D5DD6F0F8A6FAF9888C5EF9DDBFE9
+:10A55000058EFFBFF9CF17D6EF53B42FDE7044D16D
+:10A560007EABE73D457D74C05F0E682EFCE163CF96
+:10A570000551BFFCAE7EF5DEFCE9D35F5CA18178BE
+:10A58000DB083FF3E7FF35D3BD2D83C2F95D8DB7FF
+:10A59000C94CE13AFC642BBBBFAB3A0FF387D6F34F
+:10A5A000397E31FAEF1FDF4EF1E60B62407FA76F75
+:10A5B000DF755A7B7E241E945ED61067581E5AA9FA
+:10A5C000D1AA75A2BF8638A3E1CD7D1C6F30FF876D
+:10A5D000D2FB5C23D125513A9F3B57C27CA7B9845B
+:10A5E000E545D3D2E7A6EDD3B5C407F724579AB40F
+:10A5F0003E03C6F994E79A0DFC1E659294A838DFD5
+:10A600002C3B65CC4B9B3D82C5076F31B5E2B9D27F
+:10A610007987EFBC783B6D279B3C252CEF5A9C43F8
+:10A62000FBA3E6DBC4FDEECB6074DE2DF138B2A4F3
+:10A63000C37BB222E44106F38F4E9737CA90EF12E4
+:10A640007C8FA0DE2DE88EAEEFB0A1889DB380DFB9
+:10A65000B1A8243ADF403CF77C6F39BC5F73CC8EE5
+:10A6600070A91BB1B100F6B16EBCF489A12064D70A
+:10A67000D46DF812FBA9909F6B82F72F9D60AEF00E
+:10A68000E19DD44EB187FB2B038B802EAF65FF88F5
+:10A69000799F6CF4213E7DDC7818CB77C7BE5502DC
+:10A6A0007A46A0D11FD52FF95DFD03C22F20FC04EF
+:10A6B000820F88FBF93A32385F304A7DF15E352DE2
+:10A6C0002B05BFDC1FC95F0F655C5D5F51B67FCF97
+:10A6D000FCF59BE2794D2A938B6AFC56E3B5C06783
+:10A6E000B8FF1B7EBFE016AAEF815C9D4F3CF93599
+:10A6F00094CFCE5DD1AC1B257D77BC5E653A93458A
+:10A70000A29C37F9F6FCDC8EEB97CB65B40F447E48
+:10A7100082D887AF3222F4F87F5E432EFEF33F29C2
+:10A720001723E5DA9945DF4DAE11853E909A1981E0
+:10A73000AF199957C75765FBF7BCEEB073308B6400
+:10A740004DE8DC07E40F831ED7ED65E71AAB739A7B
+:10A75000F1DE79322218077AE3CABD32E221D13A1A
+:10A76000B56961F74E7512DF1F001F578C5E81E7D8
+:10A77000E122EE8B32B5E1F938F5BD51225FB89692
+:10A78000F7A3BE3FAA96E709D7AAF2764A33797EA5
+:10A7900070112962F9154ABD545D763512855FB294
+:10A7A000EB4A23FA01263FF6D2CF3DA343FB707359
+:10A7B0006604BECECCBC3ABE2ADBFFC3F82A9B9F00
+:10A7C000C47351DF165F0D766735CC5BF0E1059001
+:10A7D000C345C75DF0AAC10BBF0F20EEC9EE96D8E6
+:10A7E000BD34DD9F10F41B5DEB9EE591C7DC78AEB8
+:10A7F00073F8DB4E99E511B07C03A1A708BD655441
+:10A80000675066F7E1F3F3503C2FE89BF22F87DFA8
+:10A81000827A8EF0BFFDBBFCD642CEED35DA919E3A
+:10A82000857FB038E0423DAE4BE72B817BED3D7B31
+:10A8300062A2EA013B323557BDCFF51F66F70E80A5
+:10A84000FB4CCEDFC5BDAE1532BBF7F9925F46FFBC
+:10A850005DC34FDEFFED23F66BDBF575964B51EDD7
+:10A860002251D669D87989A2723BE6ED81BD04FEFA
+:10A870003BE1CF53BF7F30BBEC59985F853C1AEF6B
+:10A88000D9BCB49DCDA7B77DA9DB10C4F17B6DE722
+:10A89000E3D7ED2DB184DF8BD199D9639F59CE1ABF
+:10A8A00043FBFA4DF77F4C70AE42BFF97FDD6E98E7
+:10A8B0002E53D591CAC77CC9CBF453C2F4D405C476
+:10A8C0008FE52212C4D24D583EFD12E2C0721971BA
+:10A8D000613927DB1DC8C4FC966032E643BEFC8F9D
+:10A8E000C1803717C78E6A86DCB9EF4B4FEB2EB4A9
+:10A8F000E3F8DD2FFD230BF25AAE794F7E9CF38BEC
+:10A90000CC28F1E4FF2995317E428AD721BFAFE4FC
+:10A91000B72590F12C2E767F720EE24388FFA5B406
+:10A9200008FE07F1D6FC4F342C3F64A584F7BAB675
+:10A930000734485AF9CB73BC704F4F7B1B6BCF5F0A
+:10A9400063F54AB49E3F3286B5AFB57AE1DCC342C7
+:10A9500012407A5C0CA71E643807C3F89BB8079DA9
+:10A960006AECB9A0672DEF30B2FC7D12E80F7CBC19
+:10A97000A017FBE6E62CA6EF0FC9657C7B4899D2B1
+:10A980000F61E3ED0DD965F559B4FC719633398B40
+:10A990002E7548827FEB2F8AD12F8FBFCBF2D9C87B
+:10A9A000DB307E28BE7B24BBAC2FBCFFBCC4F2CD09
+:10A9B0003D7BF9EF17906072F8BDA273B2CB73A024
+:10A9C000BF415984DF531F1DAEF0FB75AE28F69CC6
+:10A9D000C8671C023615FAC3D9FD54CF4BAC3E32C2
+:10A9E0002BF9E64D26F4E17B40AF7D24DB5D84F35B
+:10A9F000D7136282F93F66F0EE44FDB33E0BFC9143
+:10AA00002B1E3768402FF8908A553857F251A31102
+:10AA1000CB53D4CE85F24FD4CE85F2136AE742F9F8
+:10AA200029B573A15C7ED9419186906359CE29598D
+:10AA3000B650BC4D3DDFF1598CAFF68CBF578FE35C
+:10AA40003764BB11BE3DFBBD8778211EF2BC359833
+:10AA50009E70157CEB9DCF30B888F89FBAFD463EBE
+:10AA60008F82362DCAF182F6405C55D87BF3B2D87E
+:10AA7000EFA9E5BF7406CF8976597AE0EB94E892A6
+:10AA8000A76B587D5ED660846F43B6B31ED64DE982
+:10AA90007B219405EDEFDF07E77968FF9847D02D1C
+:10AAA000051F443D5FB50E351CC4BA9EB7FAB7C248
+:10AAB000F7CFBF940B2BA1FC8630BA013C92A2AD1C
+:10AAC0007723CEF76643B018CEA9DCFCB51C356FF2
+:10AAD000B821BB14E16C12F826E0C4F7EBBBD275C9
+:10AAE0004F3C9BE32911F76C00EFB4831CBA1207AB
+:10AAF0007A5D258FD7B7B7F57F17D6E7392C930145
+:10AB000076C45F05DD3DC1F74794F97BF52ED8A7E4
+:10AB1000E7F79EED0FF7B0D27DE90FF7B2FE226B9B
+:10AB200000B68BEFF2477EF5F02F92F07DFCDDD082
+:10AB300079A4A502F249E61BF71D84252DB47C52A9
+:10AB400001F9248B53A54350DE6ACF990079242262
+:10AB5000DF7DE9A0D243404A531D95A88F9502732B
+:10AB6000099307E5C6587E29B4903F898AFAC4D470
+:10AB7000BE8AF727DBFB29DAA70CBA41D12EC69D86
+:10AB8000EA18AA786F48423017EC2FBA0E760FF603
+:10AB90005332E6DDE5BF74ECA61B687DFAD3B3F152
+:10ABA000DEBFE779FBF417CAF1F708BB293CF5547F
+:10ABB000913A37E2AE077F019DA9F4FB9ABD4F1C85
+:10ABC00072DAAFA2DF5F43AF17FC757587B104F887
+:10ABD000EB37D5F3D5FBE2CB52EAFDBDE14B0F3DA0
+:10ABE0004876862FFCDE2D35BE107227C73F564EA5
+:10ABF0003FCACE817D5B3EF667E06361E7307B4A0A
+:10AC000095BF6D88DEF1EE7AF0BFBF23133C57C7C6
+:10AC1000CFE755C1FFCB213C27CB5A7E0AF74AD15B
+:10AC2000E71ED03FE11CA893F67F398BEB4D35FB37
+:10AC30007E9A561C6A270D9F28DE2777489B15F5BC
+:10AC40004D39CAFADDA59BC3BFEF8D1F566DBF55A9
+:10AC5000EFC6F39B52D4DF7F15F3A9D81F83F97990
+:10AC6000D320EF843EAA2D7E4F0BF1D569BDC84F8E
+:10AC7000C177E6C9A43E5ABB9CCDFA9DBA3F06F304
+:10AC800059BE6DBF1F525862BEE0EF98FCFC30DE2B
+:10AC9000AF0DDFF7B86C89DF7B70EF4FFE0671CF29
+:10ACA0003D04F3372F5A19DF2F68FB4CA301F9D766
+:10ACB00087E14B8125A00179D25D1DEB81FCFCBAB7
+:10ACC0009566CCEB1C921BFC83B190A2FA2FEFB9D6
+:10ACD000C748F7ED8F7098314C9E76838D43EBD942
+:10ACE000D9F720BF9FB23FC6A7F90EEBC9A63A1409
+:10ACF000EA1B658CBE1701DE70B902BEF3BA9F92E3
+:10AD00001E3903FC00D60FF5D9BFBCEFDDFB41FFB8
+:10AD10003EC2E81B32E5D476FBFC30BB9D3CCAE862
+:10AD2000D248FF813EB7EA40B31EECB96BD3772B14
+:10AD3000E6CD7C53BA1E99CD7FB7A3773A3E3A85CC
+:10AD4000EE4BDD1E76CFC4A58E0178AEB537F95D2A
+:10AD5000B75D83F427EA5D1DF224C057F539710110
+:10AD60004F62C953DCE7B46ECCDF67809C5CB75799
+:10AD7000CB923D7A1B678B86D8C3C679FE354335A7
+:10AD8000FB5D4B36FF6E219FF7FE35A174302B37EC
+:10AD9000469173542EEB92402E57B2DF5D38BE378A
+:10ADA000A50CE07F5C223E3B9EBB6279C63359779F
+:10ADB000F0DC84F788A40ED286DF7728ECC8D97B34
+:10ADC000670F003DF20F6D4B8E3B813D64F7C3F181
+:10ADD000E6100FEABDC7ADAE4CF0374CE7F1FEE32D
+:10ADE000D66027F0E3E363622588DFD3FE3791B0B6
+:10ADF0007BFB8EEB5C99EC3E0891577CFD77BABFEC
+:10AE0000AD42BEA3740AC4AB17100BD89137CB4C1C
+:10AE1000AF25AF33BA14FCAE4EF227C03CE764CF87
+:10AE2000F8EF6C3AEF940D3F47BBB2076E5AFEBB8A
+:10AE30004FDF50AFEDB15F7749EC9E1207D3F76B50
+:10AE4000475F78600E9C73A376B644E7B3A47D1F7A
+:10AE5000DEC7A3B6AB7BEC9BFFA57F34D23E726D01
+:10AE600087F509BFB7DA4EEAD1CB857EF714CB73ED
+:10AE70007F63CC435DAB69BDE1A95884E3F9C70D9D
+:10AE80001EE0DFE7771AD0DE399F103CB91EEA2FAB
+:10AE9000E43B3C385A1E9EEF12F8BD4263FF00E4CB
+:10AEA0000EF9BD0EEFDDF8EC3103FECEC7CA27AEBA
+:10AEB000DB09F6D36799F6679F03FFDEB336BC0F55
+:10AEC00080A4B2EFA7717A04FAB2D3FD907F6546F1
+:10AED000BD61E58B69C8BFC4FE9D7B2C06CFC19FB9
+:10AEE0003F3C331EFC609D9ADDEC7729659307F8A3
+:10AEF000F0EA9D31A8F711BDFB15587FF9AFA6CD3B
+:10AF0000190AE3BF6F23B09EEE8E17D1FF18DADF68
+:10AF1000E872FD52473FC6077AE42CCB9B5D1CBA12
+:10AF2000AFD907FDAF21E23E4496375B244BEC7767
+:10AF30002AB7453F07FE5E36B3D76A84BF2491180F
+:10AF400053810EDD84DDFFB86D20DEB77B3E3B41D3
+:10AF5000D0313FEF28F0ED64EDABE82F31B07CBD90
+:10AF60005EEEB73C95CDCE055719BF54F84D6A3704
+:10AF70005C56D607B3DF6D2E6AB20F5D4BCBF51C66
+:10AF8000CE9A5457209B7EBFAAF5DE97DF46B83C89
+:10AF9000FAA33FC2B8874DE8A7216F33F8A9ED9710
+:10AFA0002A6390C71D5A147AEFD91D1F60FEC8D9B5
+:10AFB000976EC0DF2B5B22FBCFC23D595D66FFC79A
+:10AFC000B7D3F285C347715FD4F38D88C34B8CAF81
+:10AFD000D4C03A8642FE8AEB6FD948B78CDE4F6FF9
+:10AFE000CD47F8093F6DF7F9E8F69598A7E85FCCEB
+:10AFF0004FF42FDED3DA997EFF7F0189AF015A002B
+:10B00000800000001F8B080000000000000BAD58FE
+:10B01000096C14E7157EFFCCEEEC18AFD7EB031FDD
+:10B02000F1C1EC1A8C898D3DF8AAB1A12C36A60489
+:10B03000A17639225CCA3169C25188E3950D154A5F
+:10B040009118675B2E11C555AB88B469BBA1224529
+:10B050002D515C07901B61BA0435E0364D17052968
+:10B0600034B5E8D46DA8D5D8D8A569232424F7BD74
+:10B070007F66588F316D137557F6F3FB8FF7BFF767
+:10B08000BDEBFF3D26252A332B007E56A400D401BC
+:10B090004CD26719C0982F5199E1A5713F1F1FCB62
+:10B0A000441ED701E800B301DAE8CF6AA432B8B38E
+:10B0B000B391B631350A7C5C874C4EE31ACE3F9D86
+:10B0C000F726B86A683184E51C80C7C1FA6467B99D
+:10B0D000A01E6003FD8D473FDEF09BBBCC07B0098F
+:10B0E0007ADD50027043E8DE278900A3BDDF716B73
+:10B0F0005E5AB4C27FAB0C80E91F0893E5493DA7B7
+:10B10000530017D03AFA4C8A497DF566288BA09CEB
+:10B1100031BF5717AA00E629CC754BC6E92228A2F1
+:10B120007538AFC66B91F679D428EAB34F082F5023
+:10B13000D0EEA7A5782588C97DFB048D8F8FB277C7
+:10B140007640908E8B5786D300C6332460E94867DB
+:10B15000AB8910E2A1FF13D4532867DC0D6D7D7815
+:10B160006E6D8B10E9E376B8860DD44F00C6F5AB53
+:10B170002DC771C475298DCB96DE011CAF72AE4F01
+:10B18000DAE3E42F2902B7AF364B88F4563C88C780
+:10B19000269A477DA310170957FC6C9011F7260BD0
+:10B1A00077809008E897672CFE19D91B172B516FF1
+:10B1B0009FAC8B684FD305F40BF24DAEF825A22C53
+:10B1C00004B01FFD0BFDEED1FB7A100E79E52E9237
+:10B1D000D368B997A1ACCDB8EE108B009D2B430F6F
+:10B1E000A7C75882EBF17998E034047E1751849F09
+:10B1F000D31510E6742544385D053D9CAE865E4E41
+:10B20000D740825378341E85009D74C07F2B15C9AA
+:10B21000633B8549A4B51B21D2EB7D108703164EF5
+:10B220000FC74167148F9F168795A0E57179D3F1F9
+:10B23000282CE3F13D1D0F0FC523FA2D056279443B
+:10B24000978221125D46818B729683E222BE05426F
+:10B250009C6FFD1F71683034975631031E2D33C724
+:10B26000C5B72C3C66118675493FF52B661DB0FDB0
+:10B2700005A86778E1837EB4C76B539BFFA1608903
+:10B280008829ABC2AEC5C8D734779520FFF3D8461E
+:10B29000936F6A7E2388FC1BCA97C3AE7C8AEBE659
+:10B2A0001AB70AD0CD36855720AFA5F82AA18A0A49
+:10B2B00047A940F1B3D76FE2AF75EF53FD98475AF6
+:10B2C000915725FB640F6286F889252234202D5E74
+:10B2D000157FCB8DEB5648DAF7291FDBE5B84F41D8
+:10B2E000DCF776B7E602DA7B5832D77B709F5C9D3D
+:10B2F000B40BC7F514E4FBFACABB58F0E1E7A3DCD2
+:10B30000D32457EB9EA703E9718EA9A6279B73DB75
+:10B31000B04E8C26DC704C499E7332577B4D413CBD
+:10B32000412E05F27B816CCA19ED2B2F27BFF42B20
+:10B33000661D85EC400DE136911BEEA7F5E36966CD
+:10B340007CF5530CCE7E383594D0796586F1F10FBB
+:10B350005101DC3FA8681768BE23F55E29D5A5DB3F
+:10B360008BDE3B64049271CAF0FCCD687734043103
+:10B3700089D79125FE5B5847017D3089FE1CDF8E01
+:10B38000721087DAB01675E3F0E7364FD463912276
+:10B39000B957B85CC9285E84FBBEBBFEA664C6591B
+:10B3A000A11967561D1AB838F88D02930DC394BCC5
+:10B3B000EAB878F75F7F40FC3AEE78555A9ECCA702
+:10B3C00097BAC0478BBC8EBA61E75963BF272EFA84
+:10B3D000885FB09DD62D7D6FA884EC5A366444D327
+:10B3E00048CEC0FB05A61E565F087DC23E4B5F6877
+:10B3F00015A93803749E13631EC4AB93452EA71181
+:10B40000FF1A5375D4FFAF32C6473AAD0F79F3D167
+:10B41000AE5D965DED83A70EA521DDF5F2936BA0E1
+:10B4200092D2C1CDEBB7825FCAFF3DA7DDC97ACE0C
+:10B430007FA323D0CE0EB03F7189E2A0BDD7B9AEB5
+:10B44000038EFF9DEA4EC7D43A8F7A7DA2A465731E
+:10B450007F59FD0AA885A0BC9DD65EB2C34B7A0F6A
+:10B4600048310F43FA832ED54FBC953F70E3391E08
+:10B4700097F67A78398BFBDECEA7AF1D41DDB3920C
+:10B480007855BDEA0911EE55AFE686C8BE2A09B661
+:10B490008539DE311EC755181B0CE3E9F58C89A0F0
+:10B4A00080E7BC3E50A6620585370F86E0CF7393D8
+:10B4B000FA755AF9D42A9E6991300EEE3C057E4CFD
+:10B4C00049E81CFC715446BEF328D00AB843BF506B
+:10B4D000CE9D112146721A076BF2C8DF67ADFCF4EE
+:10B4E000E409A04CC1294599054A5992B7F1F5588C
+:10B4F000FE492DCB74CCA7A98F38F6A737049DFB46
+:10B50000F550A2A29EEAB1B93F23F4A863FD61DF22
+:10B51000CAAB14974B133BD6102E59ABAA1DF3F5AB
+:10B5200020F3FB435DA1578DE17EF8D8ECE70DF8E1
+:10B53000E5FD002222D9D764007C0FFDD138EA72E4
+:10B54000F83DC5C078C47529D7A7F81D7F3C8A93FC
+:10B550006F08601C50221542E1D43848E2ECBD8FE0
+:10B56000238F83415C4438A74931BC723C80533DF2
+:10B57000CC4DA7F9BAAB22C438EE5D6A1CC7678709
+:10B580009D78E7B639F1CED79CF816EC72E25B14E1
+:10B5900071E23B67BF13CF80EEC4AFE448A363FD05
+:10B5A000BC9E66073FFFC46AC7FA05B1750EBEFCB4
+:10B5B000F426C7FA85BD5F75CC57F5EF76CCDB7105
+:10B5C00035DDEF8BE29D8E75D3FD5E73F559875C9B
+:10B5D000DBCF3A7EFF9F7EDE37CDCFDDA81BD5AB1C
+:10B5E000777D23C7290DBF986AD6A5567149224495
+:10B5F000FE5EE256C9A7BF53B25AD228DFAD3E1451
+:10B60000B6FA101C3864F2569CA809F532D5D1EA76
+:10B610001BE1161FF2B546E43295E3FA919E96744B
+:10B62000858789E2C73861162E5F6A60E072E40B95
+:10B63000F23949DCD6EBDD623A2E6EBA178BF27224
+:10B64000494185E7ADB3E6598359D7D78652C0350E
+:10B65000058FA5D63850D346794BCC29586FBD07F6
+:10B66000F05E0E12DDCB0539160DCC749F544F8859
+:10B67000FC9EA4F17BD315A6B9896E9013C5D4BFE7
+:10B680007E92A3FD2880F5EAB6A02AFC9EC58C28F0
+:10B6900019354E8651D3D1AF87435EBABFE3DF8FF2
+:10B6A00060DD7DEE5A58AFE0EAFB0DD45FB3F439AC
+:10B6B00013D04E0710FF61E63F54837BDF6DFCA87B
+:10B6C00098FA8F474424B00E66F9423FA579FDF001
+:10B6D000920C5EA773D13EACA386A0F0FB83FE2C38
+:10B6E000E3EF818F48D8E229797AC4CDFB0E58EF79
+:10B6F000A32D165EF6FB68B375FE308AD885757A81
+:10B700004BFF158ECB9EBC517065F178E3F7A427F3
+:10B710000BBDD5C7C8A6508DBA6E218DDBEFA50233
+:10B72000F1D3F4C556B122DD98E1BE68D33D79234B
+:10B73000FC3D777FFF19B38F3C5CBECEE33669B723
+:10B74000297FF8682AEF2FC3478B9A8926E5DFE621
+:10B75000F2B744AE39E264DBFEDF3BE2EF09FD4FB6
+:10B760008E79237BC25D80F61BE7F3577E05F11BC4
+:10B770003BE7A9A77723FAED8FE4175BBEF1FCFC4A
+:10B780001574DE7FB7F36F1CDFA1830970CD4DDA2E
+:10B7900079F3E00DCE1B070D4EA7DB69BF336D2A91
+:10B7A000BD05652EF4CF049BA59E0C3C78CECEA0A3
+:10B7B000F93E1B5A9ED34C7D76A8487299B4D4E4C6
+:10B7C000F31B64935FB98AE8B8DB7B84DE99430C92
+:10B7D000420CE361330BFFF009B4BB3B47BB477638
+:10B7E00076EC9EA874613E7454195B19FA333F439A
+:10B7F0009BA47186D7BBFC4CAE6729DD3B4604BDDC
+:10B8000092612D587CB2702DDDD34766E9B7A9133C
+:10B810002F0AE6ADA57BFA8864E6C7F293C25A1DEB
+:10B82000ED58ECD7528228E74326C6793CFF82C503
+:10B830004EF17833A475693C9FDAE8DD45EF5D7A17
+:10B840006F8CA798D41F64DCBE0CA2B393B49C6A1F
+:10B85000258E2FB768AB78BC94D1FDE08407281FF4
+:10B86000F09C9040E70C7862A790CF41DDE99EF212
+:10B870002BC9BCCF57FFD213A7BAB143FE98FB69BF
+:10B880006E30C0E5649760E5C27DD92F786251D2F1
+:10B89000CF4814AF45FD7ADC787FA1F7F4759CC7DB
+:10B8A000BC1B7B7EFEC96353FC313768BE87E02931
+:10B8B00000733EF7159A6F1F1CBE4975E4B701ADC2
+:10B8C0008CEC1F16947AAA23EDBE4B12D59FC6A00E
+:10B8D000C2F7A1BEDC7EAC07DF641C67D9FF178C02
+:10B8E000D76D586CD2E9FD26682AED6F970D89E473
+:10B8F0006144F0FBDFC3EC1FDB9E78B102E9ED345D
+:10B90000B598CEB1CF453D1A498E6DB7AD4752CEF1
+:10B910007F8EEB1DF284237F6FBD74B894F264C8F0
+:10B920006DDEEF10678DECA816D9B675C87FC1C261
+:10B93000C55EBFD5F2A790177E2C887477E4DBE74D
+:10B94000DF5192F3E3ACE7EB1F90DF06BDBCDE4DA9
+:10B950003FDFDE3FDDDEF68B831C17B4772BD93952
+:10B96000C5DE8D748E6DEFD8C0FB2F56289FDDCEBF
+:10B97000F1A2844472C75FB95BACE0FEF60B576E70
+:10B98000501CB55BEF7D38EB7CC77B66E17B317388
+:10B990004A5DA75A37874FB3A9F7288FBDBFD0E5B7
+:10B9A000DC8F176601CF3B6BBD23FA297F67786F69
+:10B9B0009E4D08BC659ECDC37B1AF503ECBF54FFBA
+:10B9C000EDFEBBF79AC0E3726F00F83CE94579C021
+:10B9D0008CB7793FB0FF9F1065D8E7301E3A25ED50
+:10B9E00020C509685DBC3F8873BC2AC573DFAF57AB
+:10B9F0005BEF26B3DFD459FDA58EE490FE15E9BCBC
+:10BA0000EFD45AE7D6CB789F0952E9D6ADFF9B58C1
+:10BA1000FF5F38FA367F6FFD1B3AD0569240140014
+:10BA200000000000000000001F8B08000000000064
+:10BA3000000BFB51CFC0F0038AEFCA3330C42B3167
+:10BA400030742B33307C03E20E79841CADB02A07AE
+:10BA500065FA5F303230BC02E23740FC8E9174FDF3
+:10BA60006AC208F6525E06067520BF02482B0A30ED
+:10BA700030B001D91A40BC0BC8BF05C4CF80D84133
+:10BA80008881819D8F81C110888580581328EF0996
+:10BA9000A43FF161375F4B18BFFD8F0550F9A282BB
+:10BAA000A8FC3FFCF8F5B709E2971717223D4CDEDA
+:10BAB000AB911F1FC6EAB44F33D4C4371950F91FD6
+:10BAC00065181898E51818DCE421FC6B48F2114061
+:10BAD000B14F3210F66D3160DC01D55D66C06EEE9F
+:10BAE0001DA0FC13A07C0AD41C0004EB50106803BA
+:10BAF00000000000000000001F8B08000000000094
+:10BB0000000BE57D09785445B670DDBEF7F696DE8C
+:10BB10004216C2163A2C0A08D86C21084A67C3A0FC
+:10BB2000019A454407B5598410C822E27C3CC77984
+:10BB3000345B061DE64D147518079C06C380F35050
+:10BB400003460D1A980682A3CF2DB8208E336F9A24
+:10BB50007D3190002EAD83E3AB73AA2A7D6FA79B46
+:10BB6000E08CFFFBE7FBFF2016756B3F75B63AE7ED
+:10BB70005445359808194BC877F043D32512212432
+:10BB80002D9AD29FBF7F974EC82433FD974C48A172
+:10BB90006C23643821136D2468A275268EA11F536F
+:10BBA0000979B7460ACAD086D60B6413524AD8CF51
+:10BBB0002485D44BD7137231E7C5AA216E4224AF36
+:10BBC000972C1D4A53B78BCC8474CCDEAF2507214C
+:10BBD000CE1C0321FD589BEFE8DF64AF15FB12F983
+:10BBE00094A24EBA7C9AAFABAE7EE719BD74E55D08
+:10BBF000FC0374E5DD4A86EAF23D2A6FD0D5EFB941
+:10BC0000344F97CF0ADCA2ABDF7BCD145DBE6FF55E
+:10BC10009DBAFAD7AE9FAD2BEF1F2CD5955FB76DB0
+:10BC2000B12E3FA8F6415DFDEBEB57E8CA87841EB5
+:10BC3000D1950F7BE3315D7E44D353BAFA230F6F66
+:10BC4000D6958F0AFF5E573EFAF44E5DFEC6D65774
+:10BC500075F5C746F6E9F2B9E42D5DFD7CF307BA48
+:10BC60007CA1EB535DFD9B338EE9CAC7BB3FD395E7
+:10BC70000B3CB8B5DF25DDF7099EBFE9DA29C447DB
+:10BC8000814D889154626A26D5985A492DA636D29C
+:10BC900084E9864CFF9D64046DF074A08A50BC5BFF
+:10BCA0001968FDEF149ABE9BD3DBE91F08BD790923
+:10BCB000A1783B91754D269A6D2199E299C94C0264
+:10BCC000168A0A8E08C5B7148A771182A92B42F109
+:10BCD0006D18C5BB8819D34E914EF83D25E2C2348C
+:10BCE00035D215BFA74532304D8FF4C2B473C48D21
+:10BCF00069466400A65D22FD30ED1A198AEDBA4549
+:10BD00003C98768FDC80DF7B447230CD8CE4E1F7A9
+:10BD10009E112FA6EEC82D9866458A30ED159982A2
+:10BD2000F57A477C98F689DC89DFFB4666607A4DB8
+:10BD30006436A6D746FC98F68B9462DA3F5282E9C5
+:10BD400080C8626C775DA412D3819107F1FBA0C813
+:10BD5000524C074756607A7D2480A927F208D61BEB
+:10BD6000125983E9D0C863F87D58A41AD3E191A78A
+:10BD7000F0FB88C87A4CB3239B311D1909629A13D2
+:10BD8000F93DA6A322DB30BD21B213DB8D8ED46238
+:10BD90003A26F22A7EBF31528FE94D806F29807793
+:10BDA000214CBD91FFC2EFB9913730CD8BBC8FDFF5
+:10BDB000F3234D981644FE84DF0B2387311D17397A
+:10BDC0008AE9CD9130A64591B3988E8F9CC6F496A2
+:10BDD000C8456C776BA415D3E2C837F87D4224823E
+:10BDE000A9E07724476D0E0BFCEB05FF9FE93A793C
+:10BDF0001DE54BC46FF88EA6C446F16054B47E6C4A
+:10BE00004AB91DF24995E25512C5EF64CA0B811F6C
+:10BE10004EAC9482376751FC480D37425ECD31B944
+:10BE20004D347F176955017FFF42C276E0A77B47FB
+:10BE30009DEA1EA6F8FA6E5AA807456EF8417EAB39
+:10BE4000C29C7A03BF6D56C2F4FBC4D47D697E1BCD
+:10BE5000B4A7B43114D09B8E0FF84DD111FAB94B61
+:10BE60002101079DEA41E86114D60B99687E66318D
+:10BE7000F10EA5F5AB46996604E93855437D253E9C
+:10BE80009AFE22CB3703D2FF02E2A1F3DFCFD383A6
+:10BE9000C480E98B9914EF297DCDBCAF2FA3A702F5
+:10BEA0000AC42E1DC36174BA8BC90D5B6BA66FD01B
+:10BEB000D5B753081B4FD47F96F83E82EF813CD212
+:10BEC000AFD216AD47BF1F867A71BE7F1AEF7BBD1A
+:10BED0008132020AFF402763700BC827E2764E8644
+:10BEE0007999DDCE29F6C4F3FAD932D740A58F76F9
+:10BEF0009E419CDFCF2432A396F1978C2983B07F9B
+:10BF0000948701AB05FB9739FC45BBCF019EB4DD9F
+:10BF1000FB165F0B93A7EEEE08179BEBAAE042DB44
+:10BF20007D897051683BFBD5B74B9C56333813AFB6
+:10BF30001BE7C1BF57984840A2EB68DD620F6ECE89
+:10BF4000021C7623FF2C7171069A4A8141E57A49D9
+:10BF5000322C8190C63D492103AD9FB7C5BE19F46F
+:10BF60008096BCC0933E80F366956CA15556ECF963
+:10BF7000F9A1DFD07CDE2695500D832C487A229BD8
+:10BF800050B85D2B496CFC80776F1FDABF9F881F0C
+:10BF9000AF04FDCF27ACFF1689D151608B13E17A36
+:10BFA000BAA0A66A344DC3BBCB8A09E5E3A72858DB
+:10BFB000BB50FC5E60250AA494831B113E01F578FA
+:10BFC00058C817A467259A97DBE7E7435ED03F5D23
+:10BFD000F782A01ACDD3BF0BB7E9F31A78E1BEB749
+:10BFE0005AD4E066C4AB6E0C3E025EDE6E0C7E1C64
+:10BFF0005E0516356048457805810F382537C2A1A2
+:10C00000C4A28664DA4F0985239060C9EE87D30104
+:10C010004E0BB7595CC735E396D526EBF215F55DA7
+:10C020005CC73572F4E21BCF38804E1767185CC7C7
+:10C03000297F6B5EE64D394EB7ECFCB2224C057E93
+:10C0400094D566B96CBA7EF4F98BD55211C36FB72B
+:10C0500073DAA0C478B638C3E83A4E49F5EC362610
+:10C060006FCF2E33BB609CE6652E171B3703530141
+:10C07000AF454BAD585FCC2F51BF3FF4FC08A9230F
+:10C08000C7CCC0CF6959EFC4F513D293F2B911E907
+:10C09000A441FD12F0C64CFF7E67403CC2BCE8B72D
+:10C0A000A2560E98AE87EFDB75E3D176EE931AF9C0
+:10C0B00092986E1572528397F7430748A766DC671C
+:10C0C0003FEDD149FB6B516C6B408F9AC0F1A702D9
+:10C0D000EA517E50660E1BFDF4D3B93AB61F89C6ED
+:10C0E00039BB6C5B37E06B25E66A2330AB92DAFE36
+:10C0F00005404FE7EA56A6837C59285FFCB12F4ED6
+:10C10000FB5F08BA0DAAAD7A7919E4F3A4FDEAE859
+:10C110008CD8DAD64DF3CD063A94AD7DBFBF929858
+:10C12000DC29DF7E70DC683AFFF2FA0B4698C70420
+:10C13000C9FF2B292DBA7E09D64FFB29DD76C4080D
+:10C14000EB3BAD06AEF949D615E0D96E9EB68C93A1
+:10C15000499AF905A82249E975760EA757E2BEFD6E
+:10C16000534A9F67DE52C923741EE432AD45CB3378
+:10C1700079E95CE27300BC66D72D44FE7306F80FC4
+:10C18000C861529D0DF8718E188A607DE7C8FB8EDC
+:10C19000611AF8ED938C1C3E5495A5FCC084432194
+:10C1A000DCBA00BF32955435C983E1BB12E07C494B
+:10C1B000FA0EF94950427E56C2BE07887939AE63FD
+:10C1C0000DE34701FA07F2F756EBF9D3FCF5FAFC59
+:10C1D0003C32255DA1FC65DEE32AED91F2372DFFAF
+:10C1E000A3F07B566272773EA9AC72D1F96F34D25C
+:10C1F0007DA2F39FED224A37BABEB2573666CFA270
+:10C20000F9372526C7CE2EA3D3BF86F6D389ADBF77
+:10C210007469D0E81DD87E7DC7EA864D1F4DB03FBA
+:10C22000261F4B85FC256E251BB925557213AFBF04
+:10C230005B9DECB538A01EFDAEE1CF73D6E8D7D735
+:10C24000D1FA63D74BC863886FA5DB2613C033B11F
+:10C250001EB15F623DEA36C91B8C4307618EAF8217
+:10C26000AFB572F809BDE38B98FC3731F9EF62F294
+:10C2700002BF554EDF14EFBF9046003DB78E637886
+:10C280001236B2F30CAB678CD6FBE64AF54C9C5EDB
+:10C2900068BDEFAE54CF12ED4F31A4B5AF57F6CA1B
+:10C2A000732F07287E97BEF08483507C3CA354A74D
+:10C2B0007BE8F7455B563B004EA7958003F0E64CC4
+:10C2C000502E8A07AF510649E81B3689EE7BB9C06C
+:10C2D000FF31CB27827CFF728BEA7A84EE4BC53626
+:10C2E00053C844F7BBBC6E4131198CF9232CFFB302
+:10C2F0000B801F15F5EA51EDBE966E7D22DD6DC7F0
+:10C300007DE866001D9884BA119A96D79C18077A22
+:10C31000740569457C8E6D07E3C3D18EF2EB5946F7
+:10C3200067FB72716EAC609F4845DDCF2FC0B9B11D
+:10C33000822847B5785402B84CF5BC01067B2A9C8C
+:10C3400017C8483212F88A800309A6215F5EF9EC0B
+:10C35000AF061FA1F368AE79CB2169E04335248491
+:10C36000CBC5DA397F4DB9825C384FF1935CA36D50
+:10C3700017C476EE7A3A81CE34DBC0D2456AC83132
+:10C380009AC273D126D54331932C7AEE99DF3D457D
+:10C39000E98E7C62F2F4A5F05EF8DC814337D0FCD4
+:10C3A000C21D6A6A315B864D4A8FEE4705FD0B76EA
+:10C3B0001901FFD2170F18DD83D8F7873A45F761C7
+:10C3C000E18EBD4632A83DDCF26BF71AC3B638FBEE
+:10C3D000517B641CE8332B9FFDCA08FB7D668F44AC
+:10C3E0003A67B56F5FB2E900EA2F0027DC3FBE3F36
+:10C3F0006DFBD56E9F42135F1D8EF55CC0AF13EDD4
+:10C40000931D64F508C4E3E75FA5E397FCC9E481E5
+:10C41000F5973C7FBF03D6714AA964F8BC7175BA21
+:10C42000978E5BA206D25D98B2EF254F3F8078369B
+:10C43000FFE003A89751FCE862409911E802EBBBCA
+:10C4400077C36DB8BE79C48FF856B251F605810F27
+:10C4500028A468471C7A7881D3C3A9CD9453D2F518
+:10C460009D02FE087AEEFB32E78FF7A11EF9005F0E
+:10C470002BD56430FF8599ED5395C120EC72661D74
+:10C480009ED6FC0CF9E8D91EDECEAE810807C13776
+:10C49000919FCA070B3BB3FD61FC17DB51BCCB87F7
+:10C4A000EF50BF49F55A06EBDA717EC9C65FC2C7C5
+:10C4B000A7F3B682FE712A9DC989D8F5FDC920F877
+:10C4C0002395AF1AFCD2D035A3F39A87195D0B3AA6
+:10C4D0000F4E2E82F2CF3F64F403ED40FED07985FB
+:10C4E0003A63F9DE6912F2011309C5A3E71A95D37D
+:10C4F000B3BE9C7268D4DFE8BC15C9A9C513DA7F46
+:10C5000027843FEA25F31EA7ED34FA74058C87F5DE
+:10C510008CD1EF5951BA9DCFE9FFF740FF4951FA4D
+:10C52000271BD2AEEA7CB6480DFEEE29A0574A9FE3
+:10C530000137D0ABEA83757FB67DFFA13B295E7FD3
+:10C54000562BE854CF3763E9B464E70304F033961D
+:10C550004E3FEB5E49E2D229FD1E974EBB87FF5747
+:10C56000F8A680DBC118B8513EF8DB57DD89E1172A
+:10C57000CB072B0CEEB87C90FE7C48B2DBE39DC071
+:10C58000378167A5FF59D613F84D1B3E0A7C6BC354
+:10C5900047816FB1EBD4C32DB67C03F01B8D7EA019
+:10C5A000AE20013BDDE7D6DD329E135BDCAD8E4E67
+:10C5B00074DCD516720FE8D92D2E9E4F66F9D6344D
+:10C5C0006315F005F1BDD54266007EB6F85A1DC967
+:10C5D0001AFDF94883EC70D3F2709014C5D3AB29DF
+:10C5E000C7C5F1C32451F972845FA16CCB5C3A1CBE
+:10C5F000CE55B20774B7B9CB6F7780C9A2A5A1F7A2
+:10C60000A419F4FBBD6FCA68D368B13A06C3BCE88D
+:10C61000B95DE942E13B87EFF3691278720C5DD7AF
+:10C620009C06A617CF5DAB87C73CDB1223F019AA87
+:10C630007F46F140832FC24F50B2415F5E4AD6E23F
+:10C640007E95C6E08F9F9F77BAC81C7F869021FC9D
+:10C65000BC6180FE16733E55280F9C3483C2BDE535
+:10C660000D999868FE62834CAA609DDBA520013A73
+:10C670000EA4211E9653FE4034E7C266C0336362A7
+:10C68000FA6D7EE92FD93FA15516BDFCE9E0DFD058
+:10C69000B4F9E54FAE790DF2AF7C9CF929695F3FA3
+:10C6A0007FCFD777037F6FD963226827D9F3C7CCB1
+:10C6B0009F40FE559307ED1C2B4C5ED48FF7D8831B
+:10C6C0007DA1BC07B32FADDCFDD5E030CA9B55B8CA
+:10C6D0004F05323B475C6CF8DB7F4BA990D255810C
+:10C6E0001CDD9384FA75C5AB96201C3A5B767F956A
+:10C6F000EDB7FD70EB2937123FE29F9DCCD809F8CA
+:10C700009ACCEC6915AF8D7A66391DBFAC6EAF71EE
+:10C710000E2DCFFFC3B78381AFB4EC64FAC1793576
+:10C72000FC34F11032497E62B94AF7EB3CE86A5DAD
+:10C73000295F920FE5066CF1E0C2E0D042E100EB28
+:10C74000A27029017E98081EF3FE65E171E16E1862
+:10C750007F51C348226769E12279D9777BD02CE1E8
+:10C76000FAD9F73D5F0D06BEFB59ED7294DF1DADA2
+:10C770007B35AC3BEDFFA5754BA1AB5977CDBFEC3D
+:10C78000BA19FE0F90993C8AA583F678FECA8F31BC
+:10C79000FFBCDD83F3BD4AFA6FFC975DFF3FB8EF46
+:10C7A0003B25F4C775B4EFC7FE65D7DDD1BEBFC961
+:10C7B000F7DDEE027B6FCBEE6F338966FD1DADDBDF
+:10C7C000A0FCABF2B72BAF5BE83D4D864AD7703A81
+:10C7D000BF4F48F56D59347DCF7B29158EA3940644
+:10C7E0007CF1CE0D4315766E30819D092ADE260937
+:10C7F0007B5193CE8FDBBD04F58C89DE5FA07E403C
+:10C8000094CAA65C5ABF296F8EE711AC31F4B01FF1
+:10C81000F2D36EE479FD79EA5D897825AAC74ECC1A
+:10C82000BBF50DD0EF267965D4FF688A7ADF47998A
+:10C83000E3D8F71CFD39E28E9873C0ED33F4E5B709
+:10C84000F1FEA693C5AEE1145ED3BB2BAE2005D19D
+:10C850001DB9952AACE78EBB2452ADB157DE16D375
+:10C860009F4321DC4EF28FC16F6E1BFC16233C48A8
+:10C87000AEECD942AE027E84C1BB69DA9020D861A9
+:10C8800088E261F09B5EE6413B283F67AABCBD6A37
+:10C890005BD30474AB12FDF9529C1313C199F0736E
+:10C8A00027F6D32B0A77D52BE3B953D31FC243EC1A
+:10C8B000C7F7DD07B17FFFEC7E64C37EC4F19F2D17
+:10C8C000309B6F03FF85B99F84E7F6496B658C83C6
+:10C8D000310F94108EBE1C15FD3B270CBE6C509C76
+:10C8E0008B878D2C7F9075EB01F82CE0709C472A8C
+:10C8F00051EF2497BFFB6E0CF88D1042B4DC4BC88F
+:10C90000047A0E9937460A59E9FAE72B24E01C0A03
+:10C91000764D891CD5DA3583FA3CFCDC941EEDA7F4
+:10C92000A3FA89F8C30F9DFE95F2A3A37DE87905CC
+:10C9300052058757B4E7C47B1A181C2B1649C15EF1
+:10C94000884721D5A7F1EB7CC2F1FAAF0F0D433E2A
+:10C9500097FBCB414E3CBF7A07A0BE5FC1F5FD8B74
+:10C9600001B713EC35171B7A3BC11E73F18D7C8721
+:10C97000962F8AF4203F477EB0CC8C694B81542D92
+:10C98000C3798BB44E44395C6021C07762DBED52D1
+:10C9900084DDA592F919E98F9C0DFBC87EE6D3A62C
+:10C9A000CE4E9A7D5B3BE18C32B8FD3EC0CF518DBF
+:10C9B0009FE49F852F9C5B01AE072DE171BE38EB94
+:10C9C0007D8BC3AF78DFD746B0134C69C852012EB8
+:10C9D000530A645DDCCD7E859FA786916130AFE20E
+:10C9E0007DE31DA3605FDE903D160ADF8A860B465D
+:10C9F0007F1C7F5B2C3CA17FB00B1F533DF3009E3F
+:10CA0000C77E6121014A0FEF70FF0F2DF202FFA2D6
+:10CA10005D79C13EF6A1C2FC0AFD5566179F5A9C7E
+:10CA2000ABA6D17107D6B9868088E9CAEBF757DD86
+:10CA300058DE8DB713F5BA2E62F58E185DE5F1D686
+:10CA40003FC1C8D63F9F787E9C23FDEBED5BEE2F68
+:10CA5000EDA13C90EF0512F291F6784D903E2E1626
+:10CA6000494190BF708EC57CB184F2FF1D032B0F2E
+:10CA70004C61F252E07D2C9C2595C1598C9FA532CA
+:10CA80007C36AA0C3E02CE02BEB1F315F529BF1AC0
+:10CA9000ABB5AF4CAA1FF23CE827E50D920B4C7FDB
+:10CAA000E54AD808745851FFA80AFE823BDCAC5F07
+:10CAB000A2F8066BFDB5FD5505E7B37FE868D41F06
+:10CAC0002FAD65FAB177EE0507E841EF183CEF8D21
+:10CAD000067A7C57C678824470FC74D9B669058A98
+:10CAE000B6DF2C9CE7D445B92A98837EB468AFDAC8
+:10CAF00059834FFDD54E582EBE775DE41E0ADFE9FF
+:10CB000078388FC07F98C816DAC5C0DAA6BC245A18
+:10CB1000FEA3CA64868725B57B8D98CFC2FA623C96
+:10CB2000314E2C3D4D2B4ED2E5E7E487BB035C8AAA
+:10CB30004DA1259E3878DAA80A3FC9F794135E8A7A
+:10CB4000B783FF7F901317C679E3C06D9DDA4E3E21
+:10CB5000748E271F162F777706F82FDEDDBB331074
+:10CB6000C7E2370BD3E3C9878F96317FE0C7949F25
+:10CB700041DA328DCA87EB35F2619A05F123B6DDD1
+:10CB80004FD5AB940F62BFFE97F9CC47201FE2D080
+:10CB900075B5AA970FD31B66A17C983E4D266E8D66
+:10CBA0003DEE672AF77325940FB9E977605EF524A7
+:10CBB000C5C19B8FF8B904E00A298C0372E20F9C6F
+:10CBC000EFC7CA8B44FC7C8A51E2FEEA0EF8F9FFFB
+:10CBD00025380B7EBE989E5F400F6C8F8704F9F559
+:10CBE000E23B283F97001F193F5F7C17B74BC6F009
+:10CBF000571FF0D7E15AFECADA97FB993CA8A8CF95
+:10CC0000FAD54C5A7E67B5EA31D3FA7746F96DB654
+:10CC100096DFFE81F35B0AE74C579CFD9D3133891B
+:10CC2000B8F5FCAA0FF0A96343FE38F045C0FB77C6
+:10CC300064F4239EE072FCED217F1C0EF6F354A3F6
+:10CC400082F87382F3AFF3CB82D30A281DE7CF6556
+:10CC5000FA70D97619E1505EC7F4BCF23ED6A09BBB
+:10CC6000E6C70DFD1AFD810B77337F20055471AEA9
+:10CC7000661F17BE13AEEA06E59B24F467CEF32CBD
+:10CC8000443B3E59CFECC466FA87C57578D18E5CBB
+:10CC9000C6E1B5A06113DA9B1704F576E8B23EB79A
+:10CCA0009C81F380E0BF0BB7C5947B1E467F45197E
+:10CCB000D89B35E71099EB0FF7CAA1812F426CE79B
+:10CCC0007BEC5C15BBFFA25EDBFA4BFEC9F51FA433
+:10CCD000EB1FFEC3AFFF6AD7AD1A39BD0F25C38165
+:10CCE0003E4E18BC48EF81FFA2EBA7E3CC7DB46FAA
+:10CCF000676D9C510AA7CB770CFEAA2E50AF5CC281
+:10CD00007AF337EC38904EF3336BC91030D3CF5FE2
+:10CD1000AF978B6D72B8CE8D727666E50E69F64070
+:10CD20008037A9043C9B33D4E4077FEA414B2BF2C4
+:10CD30002F8177371A193E8FE6E31EEBDA5A80E728
+:10CD4000887AC9857411B2B0730585BF85E6F78FFF
+:10CD5000FA6A1C8737DA632AEAD9FE54D0FD00BA92
+:10CD60001AD7C0F3DB981EF6232A6FD01FD6B05710
+:10CD7000857625B47E0AF29B013A3F17F8E772D315
+:10CD800035FBB6FB08C3DB2D9287C4D9B77EF44FC1
+:10CD9000DC7DFB81F055C0E34623D7E7F9FE1DB4E7
+:10CDA00034150F433F94E4D90C951B92D18F72BC7C
+:10CDB000BA37EEE3AD1C7F63F11AF47BB7C69E343D
+:10CDC00019260EF19645168C73C3717B31FD47CB46
+:10CDD0004F62CFCD15A409F5980992FF2F8A26AE90
+:10CDE0006D3A8F3F117E5A4DBD5FA957A847325CFF
+:10CDF00006E093F78B784B881F4EC7B825FCD9DF28
+:10CE000023FBE39974BD97D6C81EF0FFDC6E701F3C
+:10CE10001A03F4FB884A002F2FBDAD7A99DE99845E
+:10CE20007C77D63BC7543085CCA23081FD9EF5532C
+:10CE3000C65F8F4167F4DB9FA8DCF282AF9ED48E81
+:10CE400080F8E1699EBD856EBA2FB70D3FB81AFC18
+:10CE50007053F35D870E017C1F9609C0F7E89A7C3A
+:10CE60003C9FDC7F9F84787D98C211DADF362DEB02
+:10CE7000D0213AEE5D6BD2D0AF36D37BA010F06CF0
+:10CE8000CE24BB0DFC6BB7F693895F03C7BB48D3B9
+:10CE90006AE0D7332BEFBB0DE65B42E500D8594B78
+:10CEA0001A0E167686FC06C9E3A6FD5704FCC6CE0C
+:10CEB000740B9BD65F3082BD631EAD07DB53B1811F
+:10CEC000D5ABA8913C16C0C7864791EFCCAB9188F3
+:10CED0000BEA537DCFCCFA0D9A69BF4D1B687B9A44
+:10CEE0009F0FEDA1DF9AE4E9E047AB785B66ED7355
+:10CEF00096BF0E7C691E6D478B4953CD7DD8DF826E
+:10CF00000D12C9A0FD95E464FD470EF4F7B6EA8161
+:10CF1000F28FF7FEDA08F3BE9B8ED785F63F470EF9
+:10CF200017427DF213C9B505ED4D2C4EB685D301E0
+:10CF3000F9B00BA32F89E7B91E28E4E107C65E8884
+:10CF40004FF3962EAF8275850369597004AAA8BF66
+:10CF50006004BDEE3885B39FEA6DC7781CDBFEC068
+:10CF6000316358C3A75A8DBDB1FDDCFA5CA4EF7BD9
+:10CF7000890FFDDDFEE54C0E1F596D094AA07FA803
+:10CF80002E9493FB575FFB24ACFFFC732AFA47CF28
+:10CF9000F708A33DF6D4069504E81C576E90916FF0
+:10CFA0009CDACEEC40F24615F3F31F30627EFF862A
+:10CFB000A9E3801F9EA2F0073CCCDF586884FC7C6C
+:10CFC000CAD74D71F8C73C7729E31731FC61FE7A67
+:10CFD0003DFDB7E3174BC631FE1EC30FCABA57A1BA
+:10CFE0009D2F964F54109BE00F4321DF14EA82F8E7
+:10CFF0005BFEB64A409F2B575C77AF07BC9969012F
+:10D000004F31A58BD001E06B9782923B40CB7F7470
+:10D01000CFAE1100BF93006FA08BB529E84F9D17CD
+:10D020009C857015F184F3D7EBF159C42FDDE1979E
+:10D0300089572B074A92885753EFE39F52BCA4E3CA
+:10D04000DD532F052D12E48FBCFEC070CCBB000F4A
+:10D05000CB977279BAD68E78FBF1BF5D580D78798F
+:10D06000F74312CE9F04FC552057CAD74B6EB063CE
+:10D07000CE7F88B59F4FDB03BE7CFC6B863F148F51
+:10D08000DD80E7E51B1E7D1DEBD7486EE8FFE34D15
+:10D09000B350FE96046482E53547503FA67200E324
+:10D0A00080F607E474C0F3F2552617ECA3C017818D
+:10D0B0007F4754E6B72766CFE0A9B4DD26A31BD788
+:10D0C0001D8B77F28C2CC4AF8AED2AE2474580E1B4
+:10D0D000D391E764C4C3FDAB6F47FC39BF454A80B9
+:10D0E0007FF9C62E807F4156DE867FCF4A1CFF180F
+:10D0F0005E9F5AC2F0311FCA01FF5EE2FA29213653
+:10D10000ADDE21F04FE0534778D74E2E25C037AA29
+:10D110001B4F8779DDBFDA82F3CEAFDA357D29D2B6
+:10D120008D8AFEF9FCAA7F4B073A9DA7B0380C0107
+:10D13000C73285C5E9B49BC7E3CB8D5DAE663E3192
+:10D14000F3D81B958B43412E425C49888EF3C7ED83
+:10D15000CF60FCDAB9DF1FC1B8C485AFD17DA7F5B8
+:10D16000CF6FB79310EAD341E42FA57532C685126D
+:10D1700025943D55737F44C45B2C7CC18EF02DDD1E
+:10D18000690A16D3F6A52F1F1B8CFEF015ADAF0351
+:10D19000FD047E2F31BB7C203C782AC4552A2CEE1E
+:10D1A0002356EE8E32317B4DF3AEA419A0FF48DB3F
+:10D1B000F6A23FA9B4F676D5A4B14F7A4C2A8E4B8D
+:10D1C000EBB17B2E74DFC18F08F39B3C483BBFE57E
+:10D1D000ACBF6719DD94D6ABA817956EDB8476BD1E
+:10D1E0008A6D1730EE35FF85E71C00878A7A591F54
+:10D1F0000FB54D0E99305E4B3E6262FC4917975455
+:10D200005EC7EE6594D7F2B89F98B898852FEC7EEC
+:10D21000394041B3F0C5AD0EA0A3B34D5B1C004F28
+:10D22000DA1FC6134DCA49106FD4519C51EDC3711A
+:10D23000E38CCEC23F2882DC6DD2C767926D8C4FE3
+:10D24000D15DCFF6C5B1670A7D65E1735F3C0D71B5
+:10D25000AFCD3B3F7B1AE6BDE8EF979E86B80DB297
+:10D26000C7E202FDA1E2F71F61FCA068B7D4C4CFFA
+:10D270003FCF6EC5B8CBF39F9850FF3BBFFB542602
+:10D28000E807E7777C9D0EF1944B7617A2FD61C904
+:10D290004BF99D499CF3AD48012F835711F719BBFA
+:10D2A0000FFBEBE4908DCEF3DC6113D2775BBC58BF
+:10D2B0006D198BBF73F338B1EDF1E36A457C537997
+:10D2C000DDD44937027FAB6372BC2DDEA9A3F8B071
+:10D2D0000FE97E5E7F15FBB69DC7FFC5ECDB39F815
+:10D2E00007DD9F274CFAF8B02FEAEEFDED535056BC
+:10D2F00017FF3E99A0E38EE025E276E798BC411344
+:10D30000D0CDCEFFC4383CD8AF6237C8F92F32C178
+:10D310006E795A6D457B60EB6E930BE2B64A777F70
+:10D320008CF471FEA58318174B78FCEC79D2F6C308
+:10D33000E21DB94DA2A2C6CEE2CA38DC21EECCED88
+:10D34000C0EF3CBE8CE1AD883B4B146FF691A91742
+:10D35000BF77C1E2E2CADC4D4680BF360E4DCA81BE
+:10D360007D3AA28BDF13EB8EEDCF057018A98D9B54
+:10D370004C14CFC7F5F1B67D627CF8FC261E47D968
+:10D38000161F4948F7A110EFC3E45D4550FA98C451
+:10D39000A1471137D9144B8FC1AB8B97EC78BEFFE7
+:10D3A000183CF69B98FD49C0A5F9727C7EFC19A734
+:10D3B0006F7A2E396BD2DC4BB9879F4B441C9998FE
+:10D3C0006F552D93BBCDDB985E184BCFE5DCDE1E91
+:10D3D0003BCED77C9CF2FABD8381EF34EFDBC5F105
+:10D3E0008DE173F9F623C600E7CF412D7F86FEE27B
+:10D3F000F013D9CCFAA3E7D8B8FD556CBF10B7BF6E
+:10D40000B38AF77698FFD926A6679CAD958B827173
+:10D41000FA3FC7E54FDBBAED463C57C90E2BF29FEA
+:10D4200025F69CC3CE54488D18BFB072398F77F85B
+:10D43000A92703E0BCD27E0B81F9AC06F868CE992F
+:10D44000AACB4F40CF51337CC3E1FC24E62BCA8DDD
+:10D45000A90612D4EEBF12C0FB91137B7DA5807C80
+:10D46000695AA6BFD7D1A4B80EA4D0FE9A0A240F39
+:10D47000E8B3EDF14CDFFF64AFACB38781ED19D6B3
+:10D4800075D163C0FDB41B422E5A85D82D4D197835
+:10D49000907313B7928E21DDE8DF7E64D9B61E70DB
+:10D4A000CFCA413C1294DB3D6DF75BB03F27898DBD
+:10D4B000B3261FF6C926FC0A3094BBF6825DC2DA99
+:10D4C0008FF483FB3B2E62F5C0FB0AEBF8BDC7B5BA
+:10D4D000763FCADB8474E361F75E849DC899A3E854
+:10D4E000EEC5247BF5F994987B90825FE3153A0AA8
+:10D4F000FF71FCDD87E442B67EB057F54D8FCE3725
+:10D50000398D7842503EC186F1CC361B9B9F982FB7
+:10D510009D0FF2030A26369F81E100E8E1745E3137
+:10D52000744CF0DE139DDFD198F9E9F4B83BCC5C84
+:10D530003E2844013E623337110EE78BFA38D300A0
+:10D5400081B803671B5C6939ED274B9A6482B80583
+:10D55000179C827BE37831EDBABBB4F7C5EAE11FD3
+:10D56000A3D05FD468043FBF5982E333E90CB80607
+:10D5700040509A8C008C5FD9443E84FAA2AFEE20D2
+:10D580009E3FCB6A0F62B901F2344D497217741B8A
+:10D5900042C8C36B0A0A32FA43BD5919060FE61B8B
+:10D5A00015A0A3C9FE0CC310987EC1AAC631846C15
+:10D5B000259503C0A2645EE56D7CA307E01541A735
+:10D5C0001D09781B0137B78A3C6580F0BEC2566BD7
+:10D5D0005BDE6BA67C716BAFB67C00F23500FC1B8A
+:10D5E000603C6FE32A88F331FB5699E9B893371A08
+:10D5F00090EEC6466C78FE20E14EC89F09A9B4FAA9
+:10D60000E2DC976EB3F3F07A1DF1F1AD3C1E79B216
+:10D61000DFEF81ABDE23B93C26AEF030B88FDD62A0
+:10D620009EFDA4594B871B2FCABDE8FC9E84BDA755
+:10D63000ED9D45AE5BFAD1F939371858FCACD9FFEE
+:10D640001BA8DFF721BF01AA8C25E1FB25E0C37FE2
+:10D650004EC5F98871AA76B37355D56A437005E251
+:10D66000AF5B02F916DDBF70CCFEB5B2FDAB3F82F9
+:10D67000FB57DE7084ED5FFDA6BD466E8F8773CBD2
+:10D6800056E2D901A6A71D6B661428745F524CADF3
+:10D6900055B0AF2A995E50DC1FE1FA425CB8F2F94E
+:10D6A0007504D7ADA737FF7C30E8F5CD064F5F1284
+:10D6B0008597A877C8CCE2C4A659FD0D304EC5E3C6
+:10D6C000E12A38FFBE7AFA7DF403F76DBE181A4CD2
+:10D6D000E7DB770C37A7F071B7366F467FE656C0A9
+:10D6E0006337B8EEFD2B404E268607C3EF3678D45D
+:10D6F0001D41F818204FBFEFE4F728F2EA252FC8A4
+:10D7000089141395A3347DCFCCCE31C7CC324F9939
+:10D710009DD1D9DC4B01BD386F9A01CF534E9E4647
+:10D72000D7CFE3FFCC8A4EBE88FD147844487512EB
+:10D730009C730A9CFE3FEBF1E6B1A45EB47CECF175
+:10D74000A3F7835D4FB4DBB28C78E66AEE4353FCFB
+:10D75000D9A56B57F88015ECA1A23EE065BC730219
+:10D760006D7716DAC138B08E5DC72FCA00EFABDD1A
+:10D77000D7D8EF4DCBE8787D12D38F2F97DD2B8A4A
+:10D78000FDFE77B3F03B327DC41BBDF7F777C08752
+:10D790003273D8318DEE6F79EE2523C06145D2F911
+:10D7A000D1F1FC9E89E6D174F95A1BC8E97D115369
+:10D7B000DC7B04FD2D4CBF7877D90C0FF8E11F16E8
+:10D7C000F704B83C2BE07CB7A04F6931635A9AB894
+:10D7D00031305870B959085FE8FC8A727628203FCA
+:10D7E0000B89465E32F93801F49187F36482716ADD
+:10D7F0002E5527DF6E057BB903DE05A96C84E16F2A
+:10D80000CED0DF039D34E68802EF158CCFA1E2581D
+:10D8100082F769F4E5B7C6DC139DEC9DE529E0E5E8
+:10D8200097F0FF415CE7A49C3B3C055A39A154F7B3
+:10D83000837D3EF8AD1C576F7CA00D3E3E84EB2BE4
+:10D84000160A9FEB619DB35631305D191EB1708C85
+:10D85000854BC19FE7317B610C3C6EBE5CDD98124D
+:10D86000070EEDD75DDD0FE4A6805F2C1C9AA02E7D
+:10D87000EA4DA620E8814D4A18E1D844E118E07E3F
+:10D88000ABC274CD3E8BF970FDE156FE3D169EB1E4
+:10D8900070A4FA05EA0FE307D9D10EF636C00BE300
+:10D8A00000AA3F34D1EF6FF651C923C0FB42633168
+:10D8B000CEF02682B022AF489505E8977131FF0A75
+:10D8C00095E70C1FFECCEC57C51136FF716E162F75
+:10D8D00043E17134061E4763F040776E899DE72B64
+:10D8E000F08F5171F083E3C1220B3FDF641237DC0C
+:10D8F000FFCFFE64B893F185F8F2716CC4D7D60FF0
+:10D90000D33BD8FB1C12F1B77D77D17E425E15E385
+:10D910003FF3CD2EA48F7CE24D81F72020C810E686
+:10D9200029E6354CF2FDD49206EF378D4FD1BE0F6C
+:10D9300021C617FB92CFE1974F027BE11C9A4F94CF
+:10D94000CFB5EB16FD5559B89ED593F4443F391821
+:10D95000434744FB13EB4B4921217C3F4432E33DD9
+:10D9600027FA5FC0D8293A9E881FB5DBA7545B58B9
+:10D970009C0461711221DCCF3C5E9EC7DF6922E608
+:10D9800084EFF290EF92A2F37BDA2229F86E029FE5
+:10D99000DFB937CC0188D77850F26F86719AA5B776
+:10D9A0000703BCA83E760DDED38F29BF74B8B11C27
+:10D9B000CA69BD79588FAF6BA1CCEC64F4FC8FEFD2
+:10D9C000A1B4E7E3CC9E46C94D211AFACCB332FA92
+:10D9D000BE95B8BBE37B69C4AF40DA6861F7D06E2F
+:10D9E0003EFC18EEDF5BD69BDF007A2B224105DF81
+:10D9F000F971E9F1B0433CED177BFEE5EFBA28ADD4
+:10DA00009900D77D966BFB801C13FAC2FB16DF1FB3
+:10DA100060BDFB2C8C3F1FF58E7817E4C2ECDC61F7
+:10DA20008786D3D460F6E1BB0BF7025E5178E6003F
+:10DA30005ED1B6FBA0EB2E88576F5846C0FDFB1891
+:10DA4000BC32337BDA6CCAB6601D796BD46FB4F329
+:10DA50006A8317978B1DE987A4912AF4E9F0DE0207
+:10DA6000C3CF7D165300F4B6BC87597CC41CE27F3B
+:10DA7000BA5AC2770074FAFA5C0BB37BCFFDB505D6
+:10DA8000E99C36DE50097E2E0B7FCFA11F7B77A746
+:10DA90006DBC6A4D7BD877733AE2E15CEE3F3C2E79
+:10DAA000B173CB5C4B21BBF7BB5EBDA8C5C7D8F13A
+:10DAB00013F61BD36E9FC4EC24FB5437C6838976C0
+:10DAC000E72D4C8E5F34F7DD60B8C27DF079E64E0D
+:10DAD00003959468FEA4C532239E5E20FA6B3B97A3
+:10DAE0008BF30431AF6EEC1E3D4FAC5EA11ED09F98
+:10DAF00027D403FFCC79C2F5887A60156DFF848145
+:10DB0000F9DF88E2EB3F59A30775B1327DF080CD94
+:10DB1000DBC54AD327B8DE48359CFE5A7BB5A897AB
+:10DB2000BE348F1C1B167DB74D52E80CF1DD0DFF86
+:10DB3000729043CA0C827281F29F7BE2C50BD9EDD1
+:10DB4000793D601C41970F1BDC35D52C8E01FDC043
+:10DB5000BEA5B351CF9BBAB404D396A397AF01FA35
+:10DB6000CCE3701E60E5F69324463792E41F60858F
+:10DB7000F87CAF6C073FEBC27A99FBF1D87B575327
+:10DB800027C869F0FD9859C5F3E13E3BDBEF63849C
+:10DB9000BD5B9377D0E4ABA3E965923BC1AAD13BCF
+:10DBA0002F9302CC938C74F46B8B7B8CC748169BA1
+:10DBB000EF1AE637B8B8260BE39BF7A97A3BD5589E
+:10DBC0002BD393C75AD9BECFE6EFDB019EC13B13DF
+:10DBD000B31537DA0D67478CEC7D353A0FC4438BAC
+:10DBE000BE9F22DE4F515B3F04EBEFB3C4F6A3B000
+:10DBF000FE393EC7C2FD354B7E31ACE732F14EB047
+:10DC0000221EBA15804FDEF0C6C3C0F73AE6F30114
+:10DC100009F87CC56529D413EC68752A9EDB9AB98E
+:10DC2000DE7FAE6E7FFA6C9A96EDF8C001E7C3BB5B
+:10DC3000F93E9D539AF03D8A452FC9789F9AA26F6D
+:10DC4000FA8FB0FD9C6C761F84DD6710F2EF866F53
+:10DC50007B77F7613D763F41E85DF9E64010E6B736
+:10DC60006FB98CF62A2A1F75EF9314D6B17B0BB1CE
+:10DC7000FAD812ABCAE338D93E2E71B17112D17302
+:10DC80005EC44A821A7ACE53DC0ACC3F2FE220418E
+:10DC90000AF773A737AF9B48F13C90A1E2F98F4A8E
+:10DCA0009B46D407A3FEF1467847AB91AFE740DD32
+:10DCB000D469F0EECAEBA472D5205AA720EC4F65C8
+:10DCC000C44D4F6FD9517DACD0A5D70363F5C4A225
+:10DCD000864757C11B2DCDF001C6379B30BEB89D7E
+:10DCE000FE68BE39AEDE48C8A3883F37BCF4CCAD71
+:10DCF000F02EC50D670C2E98DF34AB9BD153DD257C
+:10DD00007C37A19C84A64379799DEC0AD1560748BB
+:10DD1000DD75202F857C1770095DDE6FF6801CB0E5
+:10DD2000C8AE15B04EF36D3688BF18DD323015E43D
+:10DD3000DC3EB38AF6C93C4B5FDB1C0D3EEF4B6506
+:10DD4000EF091C48EDADFF6E5E771DC8BB5D3C9EC4
+:10DD5000ADF1E49DB630D69B9A8AFA9A90EF317A6B
+:10DD6000ACB0838DEF2BB7D9C1B4FA2F91373C6E8D
+:10DD7000A1E5B75EABE27DB88230F3A7B693EF972B
+:10DD8000FDABF83945F7BD88EB0DEDE47D14CE3AD7
+:10DD9000FDF4552BD7CFDC6410E89BA1CBEB16E24A
+:10DDA0003DDA8624D70AB433307DA6E578E9BA098E
+:10DDB000F0FD6D99D94D2ECB4847FBF62CEC19D6CA
+:10DDC000D02F9514B86F5F0EB970FE35BA2F5F9ED5
+:10DDD000B07A028877B5D7C5F79705399C425D9927
+:10DDE000FD3DD095BD8FC1CEA33745CFA34DC00F0C
+:10DDF000E07D19101B191B8E18E1DC7C8EAAE888C7
+:10DE00005F74D1805F3779C3B24B339FE356662F7F
+:10DE10009866F51E023E122079DDA872424AACDEF9
+:10DE20005C880F6F9D4C5C9BE97A769FCE93549AE9
+:10DE30001FB325CB23D1FC4E5038816FBE24072160
+:10DE4000CE6427DC67A3FD2E68AA3666D171037500
+:10DE500032DAFB1770BBF969359099ACC18F5F2638
+:10DE6000B1714FABFEDF423FA73F31A11DFCF4096A
+:10DE70006B5C797B7B12E397AF71793624C98DF99E
+:10DE800050F3ABAF77A5F30A455C4300EEA5DB2E5C
+:10DE9000C8F09ED28D5C2F2B7EBC6915D86B266E88
+:10DEA000685580EFF882AE4210B553B6795490436E
+:10DEB000D3B6FB54D8DEE97595189F34A3BEFA009B
+:10DEC000E4EF0CD562FEBA24FFDF00AE37AD69DDAA
+:10DED0000FE8D2A79A28F8BECFE74CDF4AE3F3E871
+:10DEE00015F1EC732236E71A00BFDBC67FA84901A3
+:10DEF000957EE22A363EED4F4D82FE2A5BF341AE1F
+:10DF0000652E65FD6592BDCB9DEE68BF632F3749D9
+:10DF10005A3B42DE4F16211E3DFDE0A29E60670F78
+:10DF2000FCC944FA66719A4885EFDDF9FDB270FFCD
+:10DF3000293ABF74C8C4F08698592AF0C96B66782C
+:10DF4000E4B2825EF0E3272BAD4017A93EB7511B28
+:10DF50007798B7AE78C09B80A71613DAE3BE1CC2D1
+:10DF6000F4F62F1FB505F9F97400E0AD9053B363D3
+:10DF7000FC2E513A67784FBB08C23C444AA4152E88
+:10DF8000A2CD935006CCAB4712E3633546F74C184D
+:10DF9000AFC66A72C178B3CD7D8DC097DAEC9A3C7A
+:10DFA0002E6D34D72B779FDE9702FBFAE590E5992B
+:10DFB000A02F870CBF413ED4115E3D66F566273128
+:10DFC0007D0EF57B517FD749EB409083AF097DCB28
+:10DFD00033AB27AC57B49B9AC4F4A89DDC3F27E829
+:10DFE00020B58978370D445079776AE0313189C995
+:10DFF0005191EE54DD0146472C9E73A73D64EE0D12
+:10E00000F4BAAB37E6537DC4E681F895FABE1EF04C
+:10E01000D3503A9F98A489DBBB91D37F6A532BD20C
+:10E02000DDD59E034670F886945A4E3F04F910D011
+:10E030000FE3CFA16EFC1D1EF4FB015FE0FBD34597
+:10E04000CAC03870DC67B1EE544EF7F773BA0638C1
+:10E05000407939CF8BF2451C5E85F240A7366EAC15
+:10E060009DDC5E9A41403F2C5CDA15D3724E670B03
+:10E07000CC8FA29D7441EAA3681F4DF55663BAA0E8
+:10E08000A01ABF676C9885F8B1607DFCF7C5DEE229
+:10E090007AEFB9D306F68E94C1DA15F04F9437595A
+:10E0A00055CE0FFD0F023E9CA95BF7E46077D4DEEE
+:10E0B0007BA686C9C112AB5EAF5BC6F161F7E7FB19
+:10E0C00052005FBEB4544FBC13E8648BEC5A0EFB95
+:10E0D000585328B9E3E09F16CE00D78A9A2FD0AFC5
+:10E0E0005A4EC2E8573DC3F53137F79F0A3F6BB030
+:10E0F00086F1D7D32AE3EFA7A51409E803F83BF08C
+:10E10000D9D3271EC97C10F048B2A35E037C738765
+:10E11000063F166EDF54D595FEF3A6CBECDE4E48D7
+:10E1200021362D7F167822F86DECBC37F17D1578FD
+:10E13000383A2A87362571BB686FDA6FF9A317D191
+:10E140002EFA32DFBF1AC037A0E73502DF8618D8B3
+:10E150007B697A3A1EF903F1EF5D8F3D95897687E9
+:10E160001C4AB7F0BE1AD0751CBCD8C3F1F231AB53
+:10E170007F17CC3F96DF9F91FCBF4DE91D6DBFEB34
+:10E18000E42D03666BFA59CFE1F1A5EAEFE98A03C2
+:10E19000AF285C4957D8E712BA330007B241726919
+:10E1A000E3DD533730FBFE7B9C3F88EF222FE03DC1
+:10E1B00036FAAEDC7B494CEE1B4124670499DC2720
+:10E1C000865BBA821C5F60F5DE827696470D04DFBF
+:10E1D0005195F210DF536B9E38F9ED70482DBDD08C
+:10E1E0005F42DC06F0832E78D88DE7BD15BFB320E3
+:10E1F0009E9D4862F1112B6A54C4B7336A35C6E15B
+:10E200009D3951DA13FC2D814F981C4A044F813FF0
+:10E210003B39BF1178D76B2DC3BB1AC56B05BC1337
+:10E220007254E0E7992D370F057A13EDA378E31ABE
+:10E2300022F06616FDDE6B4D5886FDA1FBD60A70F6
+:10E24000E8BDB615F957A27D137E34B17F82AF0FBA
+:10E25000B319747E03838DCD3F3581DF3F2AD7F418
+:10E260007C98EE87641BA1C77FB85A29E8A9B90337
+:10E270003AB8C7C6DE77AEFACB1CF4DF0B3F8CF0A2
+:10E280008F8AF1536C0C1F12F9515ACCFE4EB618FE
+:10E290003F9F1BF93AF39B88DF33B0780B8B63DA2F
+:10E2A0000545C02F8E5B83DAFBB9D72AC4AB0CA51A
+:10E2B000D861CBC2795D0BAC82E653971A491F7ABD
+:10E2C0007EFA72D4DE4607AD3FA1355C7C3D5DDA57
+:10E2D0002E6378DA24B0EB126F29E8136883073CC9
+:10E2E0006F66FD1257AD6E9E03389CC5BE887527BC
+:10E2F000925B89F6E31E1BF77BF1F2583A37F2F294
+:10E30000D39C8E3AA6D38013E8F42612580EF1154A
+:10E31000F4A08D71696D744A0FDED07F01EF577CD8
+:10E3200017F938745A604BD3D06924CCE894D3A33E
+:10E33000B346F5C6D34FA6D8983C72D614E6823CB5
+:10E3400071FA30AC9CFE30BA5E40E91AE83500F450
+:10E35000D919E0C9E8AC97B71AE3197BD530BDFAF3
+:10E36000CB64B6DE05377AF7C27BC80BA85E2FD127
+:10E37000AAD59CAE13C33DE494987C72023FB96960
+:10E380004C381FE4AD1BEC169DF1575BE0A68C1DCD
+:10E39000438221BAEFEECB84F189134FDDFD20F0EB
+:10E3A00087476D78AF49C89FB424FF3CC0CB44F485
+:10E3B0004CF1D20B76A7C55FDBD8F92F81DF7BEC60
+:10E3C0005203E99382785EA1C5F3B1BE5619E09A73
+:10E3D00092E4CF5093E9F836EF38730FBABE2CAA07
+:10E3E000DFD2FC4F697E2D5DC7D64E61C2F355B6B4
+:10E3F00051FFB83D2EB0F6A6D7C1BFBF25C9FBEF70
+:10E40000308F16B32F00FB7C53B75619E395AED26D
+:10E410006F5F017638BA9EA3B70DF8DD2CFA75F65A
+:10E420001DBE2A2815F6E291DC5E5CD13004EDC8F1
+:10E430001ABBF12F6D57B01B7734AE83D33DC56F38
+:10E440003CC739725A65E08B82AF6CB475E2F81C38
+:10E450002670AE10F4057C09F45A113F00F6433BD8
+:10E46000FA2382887F90770E8DF29BB5D586B8F11E
+:10E470004DDB6DB6B87C9434FCEDE507C53B8A8C6A
+:10E48000AF6EB769F48A9AEAA3E94C4F65EF92DD63
+:10E49000CFCFF2EB5678DEEB931ABDD73CCA640CB3
+:10E4A000C07B8AF460E67669E223A506296487B812
+:10E4B000BB6F6811E0D137064CD7FDBBAF280BEC22
+:10E4C00025870D9E1504E310103E393D09BEB35358
+:10E4D000CFED9CB9C76C5EF0EFB74866E49F2D475F
+:10E4E000AC01909F2D7603DAC71B779B902E2EF5FB
+:10E4F000B1723B465067EF10FE9A4B6FCF4901BE99
+:10E50000FF24F75B3E79C735687F14765945A13003
+:10E51000EF04662976EF326F6957B49B0A3B6DBAF8
+:10E520007996C4828458FF8A99AD2B5DF14B60FFC8
+:10E53000DED4417CC35F6D46A1EF1E06F8563C1445
+:10E5400036C27955E8BB421EF76CEEB517E21C7A6D
+:10E550001631B3D8A6668301D6B789A25172567B0D
+:10E56000BC12F8B3A97D1CC1099B865F4E5ECDE24B
+:10E5700008DAF2BCDD6F791CC1D8E3475FC4F7F25B
+:10E58000CCFE8F74ED0AD3ACF1DEE19EBEF4416C9B
+:10E590009F08EFA71BD8FB3BB1DF4D76CEB795CADE
+:10E5A0006E78FFE9AF3F4E72C7B1C74CFFCB6CFC32
+:10E5B0003D11B1F6B3E8F8FFEE29A0FB26D9DBFC4C
+:10E5C0009499E037EBC84F193BEF43AABF473CF99A
+:10E5D000141B4727C66BDF9E9DBFDAEA19897F8728
+:10E5E0008DF53B54D36F8E9DE93DD32582F1EDE44B
+:10E5F0005B82725AE009857B373B2DCF7EE7D830AE
+:10E600002BFA715A65E003970EF7E98EFEF304E7E3
+:10E610004D311F42FC7DE3C5694C877776E2AC6FD4
+:10E62000849DC9E7E92AF3374877F4C5F3FF748B73
+:10E6300049D2C6E567D9251D3D097BF33ECB48BCD1
+:10E64000BF0876F978F08BF5C366818F348DC1C52C
+:10E6500013079F84DF4FC0B92AD79BAB30BB18DEAE
+:10E66000434BF532FE995A44D07F3652F2223C6E2B
+:10E67000B6337D69138F7FBBF4368B57CDCE75E3F0
+:10E68000EF71A272A2D03E02E3A95E3468E2A9044F
+:10E690009E543D47E5B1CE6EC8E84A9C9B93391F16
+:10E6A00076C17B129A7AEE87800744E540F755667B
+:10E6B0005D3E73898B281A3991ECCDD0E5BBFB5CAC
+:10E6C00056382F752F72EBDA09BC13F17CF8930AD8
+:10E6D000EB76A1DDA9139FCF48C98F78037C0DECA1
+:10E6E000C1F7F27DA2EB9D037834B6287C498B37C5
+:10E6F00062BD1DADEBE83237F2C2E3CBE87C295FA7
+:10E7000098B3366B7906C2DD45E01C71729919BF6A
+:10E71000DFCBDB273F3E0BEFC926AF72A33D36D9D7
+:10E720005BF93ADCE349AE74E3BD81B9D59204E705
+:10E7300074CA67B0DDC6652E4CC57EBB68B9648BF4
+:10E74000BE239E487EADB2DB74FADE15E4D72AFB09
+:10E7500088F6F2CB60F6BC097EFDB206D90D78B121
+:10E76000B2B813C6F7AEAB65F7D9F637B0B8BA751D
+:10E77000D3991C11E39E7FC989F2E2BCF87D29DEA2
+:10E780006FD2A7A0BFFF9B74E0B39B6CFEC7EC1ACF
+:10E790007EB9AE618485BFAFAC933FF4C705F71B6C
+:10E7A000D0C726819E34648DD21BE9FE29684FE6CE
+:10E7B0008587597A039EFA3F8077482F1DFE3C13C8
+:10E7C000F64FF8EB843F4F8C23FC7D92E47F463B71
+:10E7D0007E7B7F9EDE0F253BCC18879B23B3385C66
+:10E7E0008D9C25B08F2B411FA478B6F28815E1B11E
+:10E7F000F25B466F749E2FC0388DF66CC41F214F9C
+:10E80000E93C07BF4BA2F3AC30B4666ADF21D5CC3C
+:10E81000B3FECAF38C8953E5F392ED0ACEB785585F
+:10E820003D30AF7AA3E7B01FE4EC792BDAED5ABCA8
+:10E830003758E03DD916728305DE99DD6EF337C295
+:10E84000FECB3D5A1DA067EF6F18D61FE69BC8AFE1
+:10E85000DA6CCB7B03E645D7F716F20957F8D2F30B
+:10E86000EEE8FAAEE08F7D0FDA7D8FF51FFE3EEB0E
+:10E87000AF80DF8FC10CDDA84F499CEFC6E295D475
+:10E88000B0F76B880FA2F4837199814C125C49E157
+:10E89000543588E117994BF8EFC7D1E3C1269BEFB8
+:10E8A00034AC57D0DD15E0D30CF37EDCE63B0FF53E
+:10E8B000611E70CF83F299562EAF5E341AA27A543D
+:10E8C0004A0AE357ADC904E36762FDDD76FB94AF06
+:10E8D000A05D7A3FBFE41AF8BDF09C38AE08BF10C7
+:10E8E000C63D887BA665E09785F8AD3AB559FF7BB4
+:10E8F00074F470D86EF359A1DF401E7B2F0EF06ABE
+:10E9000025B9223C1C0E84873FD941E1615729BEBD
+:10E910000050726665009C5BCC2C1E60E772068717
+:10E920009677181C761D37201E3F410620DD0D35D9
+:10E930005CBC1BFAA7FCA31BF433A6B55682F36F8D
+:10E94000E712B701F86CB7568F6CB832DEF6743048
+:10E95000BCEDE560FB703FECC3B0B7995DE60A78AB
+:10E960007B0D8CF73DE07EBD63C4D5F3178A57C39A
+:10E970001C1ABCBADAB82889DF8F8CED8F9E87D03D
+:10E980004FB0779709F951F94E761FB47CCF293CE7
+:10E990007797BF6A42A42C78D5C2EE35D4B1F2F392
+:10E9A000B9F1FDF9631CEC9C55567B9F472F77030B
+:10E9B000F8FD97DE8BAE3E72D43F9A3281DD13585C
+:10E9C0006911F1A0CC4FEAE07896D2C3E705B9927D
+:10E9D0005248F0BE80C3C6E206DBDF0760749BC608
+:10E9E000DBB95C6E09E01D7B3F200DDE8B667E6E21
+:10E9F000C417D960F580DC4F298AA9672B423F6A8A
+:10EA00005ACC7D82390EEE4735920CE023B596F84C
+:10EA1000F7805A1D42AFB3E2B94EE1F36AB41BD995
+:10EA20003B2E7633AE7B71324929C6BC82F23CB6AE
+:10EA30001F91267B0DBA7B26294556DD3B0A69BE10
+:10EA40004EBA7CE7195D75F5BBF87BE9CABB950C3E
+:10EA5000D095F7A81CAACBF75C7A83AE7E16453812
+:10EA60006DBEF79A5B74F5FB564FD1E5AF5D7FA79E
+:10EA7000AE7EFFE06C5DF975DB4A75E5836A17EBE6
+:10EA8000F2D7D73FA8AB2F27D0B35F72B0F38E2C4D
+:10EA9000F46CFB703FDE2BB29B2593E63C57CDF721
+:10EAA00023D7519401FEC755F6711970DE6C4CCE18
+:10EAB0007686E3F42BD27FF41CF6BC436F3FCBE3A6
+:10EAC000F6B3F3FB281781DF57B19FE201FE7E26E4
+:10EAD000FFF30E6E0F98E586FAFCDD0AC583EB980E
+:10EAE000EE30A35D2CB6FF6A873BEEF94936785CC1
+:10EAF000C552627809BCEC085E2FF3F9FFB3F03A17
+:10EB00001413F723CE6FB1EDCE390C5CBFF637018D
+:10EB10007F6B3BA79156D987E7B4CFCF0708F05357
+:10EB2000827A4B223D408C2F49BE4FA09F587EEAEF
+:10EB30005B3A8F9D330D5EBC8F95E8FC76CE117BE2
+:10EB40007E2B9C81FB916CD4C1E9D3363AF7EACE97
+:10EB50006FAB92B3F1FCB64AF5665CCDF9ED5307A5
+:10EB600032270A77373BC78AFD347ADCEC1EA75E72
+:10EB70007F69AF6F53F947D7B90EF43809F4B2146F
+:10EB8000A67FEF64F7FDC5B857A16F13E755E8DB23
+:10EB900026E259A3C8B85F4627AC7F5EF87E8BFC9F
+:10EBA0000FE9D74EE7F7907FEFAB1E8CEF7F7F82A8
+:10EBB0004CE0DD954B4523F19E74227CFC90DB5F9D
+:10EBC000DE7532F87664BF787F59C915EF57BC3FC0
+:10EBD0009EC5514E89795F778493D1CB2427C7078F
+:10EBE00013B3439C7BD98EF1F0E76EF9087F2FD2E7
+:10EBF000B9BA61C303F87BC03C4B206E2660B3A357
+:10EC00007D6FCAF811C397DB3578C47FDF58FE2BC0
+:10EC1000EF38C07E336547EFB4802D31FE4CE2EB18
+:10EC2000234AF81A8C977EED0CFE3E9A29BBFAA671
+:10EC300031FBA23ECE2CD6EE33656939E29BC897F4
+:10EC40004508C695B5E515769FB82CA2601C5A17E5
+:10EC5000279783DC2E94105E5709CFD8EF029EEFE2
+:10EC60008F3FC3EEC55BE2EB1B3F71EAFD16B1F7C8
+:10EC70005212DDB798CDF7E952D128BC5F3FC5E805
+:10EC8000EE7B35762A01A7A6CBA792802FEC81FBDD
+:10EC90002E71FAFF9193F1B33DDE13296096CE35C4
+:10ECA000B7E603FEE7723B789C78FC0AA0BBB19103
+:10ECB000A21F241E7FA993DBED78BC7B81D3CDFD01
+:10ECC00092FA78FC8EEE134D36C6976FD3A2F0FB06
+:10ECD00008E8F5FE8D2AC6EDCDA7730880FD6D937B
+:10ECE0008AF6B70F2E9B08F8414E6D509F8138B3BE
+:10ECF000928DBD373E4EF325E34DE8B799BF89BDF0
+:10ED00003342C65B82E07F2DD9F4403ABC1BFE192A
+:10ED1000A5DB4554699ABFF1098C7BF9E0F823180B
+:10ED20005F7D06E8997E2FF9F667D301FEBB8CD58F
+:10ED3000D70DA1E9A2ED92EE7E44698D459717F1BA
+:10ED40007B62FF8814BD37E1A6726433DF2F21AFE9
+:10ED50008745FD5D9B9DCCDE8171F0E513D8FDA854
+:10ED6000FD27D9F9FD401F16DF171A7F7BF110BA76
+:10ED70008EF169EC7D96D8784002CE31783F85C718
+:10ED8000EB8EFF4469BBC7C2CABDB642CDFD80D77A
+:10ED90009755E2BE8CFF35B39B8CCF6271ED09E3D2
+:10EDA0000433DAC5F9F703B9D92E3E307A7FE76824
+:10EDB0003CBCF9430C5DEF3FC9E201E7BDCDDEC7C6
+:10EDC000EA886F7EC8E7FDC1F101773D4FE1F1416F
+:10EDD00011E3E21F5CBE7935BE3FE39308C4659E34
+:10EDE000BA1CFF9E58B253E84DFEB6FB34B03F53F9
+:10EDF0008B16B4E5812C6FF3DDA7BB6F73F5FCE6D2
+:10EE0000CAFC64A593F91162F97B2CDEFF9FE2EF47
+:10EE100053C61FC884FBF734FD1DDEC3DFC1F86392
+:10EE20002C9DC7F27331AFD8F996450CBAB8E16999
+:10EE3000C0074668F9B911F93C55EFD9BB30D94A3A
+:10EE400070A5847A80E4A270186E0BA6E4D221FE2D
+:10EE500007B1ADBCC8008000000000001F8B080097
+:10EE600000000000000BDD7D797C54D5F5F87DF3C2
+:10EE7000DE2C496692C96412929084093B15718018
+:10EE8000B008A82F04421482032AA2069D84256C90
+:10EE90002191AAC54A9B810444441AEA8614ED4094
+:10EEA00041F95AF41B116B6C834E04115C6345C528
+:10EEB0007E15C3229B2811AC1FEAC6F79C73EFCDC9
+:10EEC000CC9B4C58FCFAFBE7173FEDE5BEBB9FFD22
+:10EED0009CBB4CAD737D82BF2F632929EC369F9D6F
+:10EEE000B1B3F87755383D611F69760E62ECD138C1
+:10EEF000BFCD990AF5DECC1CC912191BF856BDE22C
+:10EF000087FA271536B93E46BB1FE34C8C41BB2D13
+:10EF1000665EBE05EBF50D97A739F37F8C83FEB6D1
+:10EF2000DA20857A8CD99C877A3396C74C2C496530
+:10EF3000AC58F1A7E17815B69695A5503A6FF7B79A
+:10EF40001628620F5BFCE95A1E63814C8B77636E57
+:10EF5000FB713D4EA804EDD2168C6407073266B5EE
+:10EF6000B140DC00C6148D05CC03701CFF2213B425
+:10EF7000D72633B65C61AC19E686F559EF74134BAE
+:10EF800063ECD736467F81910C27C30207E28335B5
+:10EF900030CE8F4CEF8970F889E9BD705E9F30BD2F
+:10EFA00037A672DC5AB14ECDC4FCCFC58047A953F9
+:10EFB000E1E3305F4F9F83B1E923993F121E321D79
+:10EFC000E7D4A85EFE2337E5B440F9E7FB6FCE61D6
+:10EFD00090EE787848524B8CFA32FD437595771451
+:10EFE00034BDBFDA4F6912633ACEE781EA99DE5148
+:10EFF000DD1973421EE735DDE2EB991CD1CF65CEFA
+:10F0000064C253E2E55B9ABBBA193BB442752A1E4F
+:10F010004899A908DB1F0C26156DEDCBDBB90DED6A
+:10F02000F83C55A633D60DD66DD7BE6B11B03BCB91
+:10F0300070BD8CFAED689DA5024F16E6B5617BCBDD
+:10F04000816B6CAC2BF4A7E84ECC4B7AB81C4640D5
+:10F050007AB8173F5D0E74A7F86F71523B3D459625
+:10F060009FCDC5F18B282FC767592EC6323A861718
+:10F0700053743FF67394E9A598365802973861BDEA
+:10F080000DF16C662C7A2E17F8EB21D6C598DD7938
+:10F09000F812311ECC6F63823E1BFB3969F3CDC57C
+:10F0A000F4CACEAD352AD24D9C53D46F61887728EF
+:10F0B000BF1DCB597A0BBB16E07D254C763964FF1A
+:10F0C00071F400F3009C125B0F310F8C9F88F88B5A
+:10F0D00001376B32E7ABBF3356149BEF142A5F281E
+:10F0E000E6B901F8C5E40EF3CB53D0EEB9BEC8774C
+:10F0F0007EC177FA350CCA37FCD1A52C87F2AEBA9F
+:10F10000C784F4E16E667A10E121E02EFBDFEBB4F8
+:10F11000101C900F9573F0E1AA8BE4C30D7F1C6760
+:10F120008AC379FE96797B78B0DCB3D806F927E6F6
+:10F130003BBDCB21DF6D05101AD4CF5E10BF5E85BD
+:10F14000FA6B9D7C9D5D1E628BE3A076EEDA560D18
+:10F15000E5C3B885CD9A0DEAE7D6B668289F5EFA72
+:10F16000ED9A1CA4AB639F5FA33AB0FFAF65FF00AD
+:10F1700020E0F7E14E8E4336B4B40BE267B393C39D
+:10F1800057AEE38FF1FEA7089F55AD0556A896B37D
+:10F190008069282F8F29FE3FA774C37EE32707FBD2
+:10F1A000227A39BDBD74F8789F32C8BF24F95D1941
+:10F1B00099C9D2191BB1C14CF01CB1E1E15B11DE60
+:10F1C00023368CD114A8F2841652345C6795AE05B0
+:10F1D00020FFA6D34CE31FFB7C761705E7FBB19518
+:10F1E000F58801DF9D62FD9B9D5C7EFDC3129B6ED9
+:10F1F0005F6D933B9C9F863345CAD757857C4DEC0A
+:10F2000006F09877F72992AF7F717AA8DF27B4FAD2
+:10F210009D99342FE60DC0A7D99BDE23792FC79186
+:10F22000F5E66C5EB714EB65DDE1ECAF7AB05D4BF3
+:10F230001CD2CFB7711C5FDFDE1D1F5CA410FDF771
+:10F24000F75D1A830F59C86A4A270CD878AADB4C95
+:10F250004301AFADADF928F7A0CBC5C89785C91E4E
+:10F26000035ED6B53AE3915FCEA70F0E087C5E2809
+:10F270001D6E4FE67C03F25F473C05066BC11AF832
+:10F28000BECEEE3F8AF23FCF1E4CC9872AB5E7D7E4
+:10F290009B2710BEA0374FFE2CBD29F4A5D49F6D2F
+:10F2A000E5029F35427FC6D09B3FC6D29B6E16BCFF
+:10F2B000BF1FAC879D307937B2F6E32E14FD9E8CCC
+:10F2C000D7D564187F84C27C386EE289034C89905C
+:10F2D00043F3045F6F1174F0948BDD3621C63A66F8
+:10F2E00009FA3495B45A5AB09F4685E8BFFD7AB9F9
+:10F2F0003C01B998928C7CD605E4A6D25E6EC6C05D
+:10F300004726CEB3F35BFA76249261C91B1200FD47
+:10F31000E7C2474E32E143EF82A984FF80B3EA6D32
+:10F32000BEBEEDE1DF3399CF7F9843EF81F54F0B00
+:10F330003EEB082F8392393E0A93B93DB3C521EACB
+:10F34000C519EBDD96CCE13C35D9C89711F81B9473
+:10F350001C037F520E9F8CF70DC575FFFDE89604C8
+:10F36000A4238927297FA2F115E6B345B41E807333
+:10F370003EB68FD63FB27DB41E0AB70FD07CD721E0
+:10F380001D21BF211D79B89E58D7373C3F49E7253D
+:10F39000627D67E3F5625C4FF43C9D274CCAB9E699
+:10F3A00099DCEA5690FF937527A5FF386A52705E84
+:10F3B000CE564DC17939857E8CD683202E04DDF062
+:10F3C0007EB6A3DC80F1977E39351DF1BC34DF9F1A
+:10F3D0005E05F5AF71E8FE64E223BD14E131C5A11D
+:10F3E0009761FA631CC7F3A0647D1AE693851D1527
+:10F3F0003DCFB9627D00CF39D84FE22816407D78E5
+:10F40000D5197B10442C8000E60DFA2151778E44EB
+:10F410003D96B89679914E53125A9BAC906F7D9859
+:10F4200079D743BE67C063B2A27EBB435F8CE9D28B
+:10F430002F55B23B97E6B3E062EA87DBA1ACB66B2F
+:10F4400090F437F05B24BDFE5ECCE3F7C99C2FC17E
+:10F450000EB92799E3F977984A3B44F2514776452C
+:10F46000041FD652BB0BE7C3FB71FD17C1877F4852
+:10F47000267F42AFA3799E870F1F0DF3E12358FF2C
+:10F480007C7CF8A4E0C3ED22ED880F5F13707B3322
+:10F49000B943FFE3C9587CE816F420E91DF910F5DB
+:10F4A0007DA39827C8CFBFC6A2F70BE0CBADB1F8BC
+:10F4B000329A1FDBFABB40FAEFC8FE1BE23AB7FDF7
+:10F4C000D76CE77897FC0CFCB253F0CBEB825F76FD
+:10F4D000717EE17A399ABFDAF44D2B97138CD525DA
+:10F4E00020FDC879EE97FC13AFBF17C967D24F91C3
+:10F4F000F093F5FF23E8FBA848135B0F30940B0053
+:10F50000B77F45EA8DA704BF048632E217F0B746FD
+:10F51000A25DF9D209B0232167777179306275F362
+:10F52000766475A6D5254C74740CA72B5D1E01CF8F
+:10F53000D87082F1BF8885B746C49BBDBD3D1F8D85
+:10F54000AFBD623D761787C7CF9D87841FCEE3325C
+:10F550009A87C7B43C42CF2B2E45D21973417AD536
+:10F56000A85695D1BC4209E042B5C9539605EDF3C2
+:10F57000DAB7B785DBDB5C30CFAB7468DF37DC1E16
+:10F58000C62779D7ED0E90676427EB26D44F4B73CF
+:10F59000393D44D3FD06B41FFA46E0AB2E93F0B5D7
+:10F5A000D2E64FC3F96DD03C26B4EB362C732A015A
+:10F5B000C263553CD28FCDAE135FC7904359AE8B1B
+:10F5C000B3073C2E2E87725D1720877A0BFC801CB8
+:10F5D000EA85F5EDE791434304BC86BACE6D0F0C86
+:10F5E00013FD5E29EAC790434370BC6839B4D5C6A1
+:10F5F000E110834F8763FD34A73E02F1047C7A85D6
+:10F600002B42AF41BBAB30BF52B45F5167EA4DF6FE
+:10F61000338BF7C6F233C6B9EC063BE50AE13FB0DF
+:10F62000C6EFFFF6DBC18C5562119FE738314FF210
+:10F630002736D41D4843FCC39F21AEF2E062EFBBE6
+:10F64000DD116FEFA80CEDD0077FDF62417837C482
+:10F6500027F6639785C7ADFC0E083205F0F29D8949
+:10F660005289C7798D8B0632F023F20FFE90837694
+:10F67000E5C9FDDF517CE484BDAC04C7DFB18DC7B3
+:10F68000494EBF353505ED7339FE7CC417CC6BB4DC
+:10F69000DAB73E04EB3DB5CBE2457DAB32CFA323D9
+:10F6A000603E95BBCC2C48728AD9B0BE994F9799D1
+:10F6B000772D6D561331AF05447C43394BFE8C27B3
+:10F6C00009E9D6BC4B65C887CCCDCB03CCB6E82CBA
+:10F6D000F89B49434DCC13110F49D6E39927223E9D
+:10F6E0009152E432E4537D9986FA9D2677359467EA
+:10F6F000F87F6528EF3C7380219F5D35CC50BF0BB0
+:10F70000F83B91F9DCC03586FADD964D34E47BD4C4
+:10F71000DD6CA8DF6B7599A1BC4F70B6A1BC7CF7FE
+:10F72000F316F4AB2FD934DFF0FDD2FADF1ADA0189
+:10F73000409ABB039D4C631CFE97352C36D49FD654
+:10F74000327B1CD26DFFD07263BB3AF3210ECF0027
+:10F7500043781E617E0BD299C65A777606B8CF0BD6
+:10F760002ADE10549BD590DB0DF9E18B378A762980
+:10F77000FD605EAB793BD9CFACA0313F47DD4CFC9F
+:10F78000138DE74AD635C9938774A0B2A012C6FB81
+:10F790009C4DC6F60CE35DD06E8E584F345D1C61F7
+:10F7A000558F8C40FA08E8CDDDD3C2EB36B3FAC1F1
+:10F7B00021FC2EE8C429E844AE5FCE5FAEDB09FF32
+:10F7C0006139287C0BD2D98C0685AD51DAAF6F66D2
+:10F7D000E3AAA59D63AC93B1A005FDEDE8F9875CB4
+:10F7E0000E37C5AD72580EC6AD583BFEB0933C3EC9
+:10F7F000B5560D5A81AED540EF28FE30AE3F1A8E79
+:10F8000017CB2F1E01076BBA915FE23CF1D1F436A2
+:10F8100038C4DAC335A1B7918F241C255C1DDECC1A
+:10F820009874E581FF387C75F64BC2F704C2372126
+:10F830000CDF9336FF4994C3A7F77EA312DDF95B73
+:10F8400006A21EEB482F391C234FA31C83FA3958FC
+:10F85000BF3201E46212F473E0879EC86FB29E6FFC
+:10F8600041997714C84545F1FFE08A888B34EBAAAB
+:10F87000230FF035A741F5A21E3EA9D9972997D1AC
+:10F88000323DCE3454D2126F1C8F126F4AE3F6FF12
+:10F8900028002F68E3B760FCB5C86BC3798227479F
+:10F8A000714E05DC9BB309A467E353283EA2338A5B
+:10F8B000FF9D62DE1AE8AFC6F1B74BCE130F494C7D
+:10F8C00021FFC29F118FF6436BCBE967B17BADD9A6
+:10F8D00089E34CF0FB693D43708260573327C029B0
+:10F8E000225E04EDD2B1FD84C7FF9880F6F04B870D
+:10F8F0004EA9A45F3E71933D2CED83F6F67580F41E
+:10F9000097B4D7C13FEA92C2ED985CECAFCD3F12FD
+:10F9100076B5F4733AEA07EC8EDE68CF74942AAFBA
+:10F92000AAA44F5B9578EFFA18FA342F4589A94FAE
+:10F93000417FE6A5A446C4E3EE3CBD13E51DC07BB4
+:10F94000087E7738C0AE512EC8AE198EF51F4D48CF
+:10F9500024BA6EDDAD067B418353364F920BE03601
+:10F9600052E85945031DE20AB7ABB2B9FA6A03B1CE
+:10F97000BC4F128BE1A7C87424D64B89882FC619B7
+:10F98000FDD1A503F8BC8A53B83D739FB09F4AC50B
+:10F99000BA2B310E97128EC3554EE671E687A3E25D
+:10F9A00097A5290EAABFC43EB214D7B3345721BBC2
+:10F9B00069A9A218F6919253F2A9FC16D17F29F4F5
+:10F9C0008DE33DD595CFCB1DE5BF678BFAD929BC1B
+:10F9D0005FE0A43E886F8BAAC684E78C143E7F69E3
+:10F9E0003F49BE192BF8A650C8CBAB7B80BC24E6A0
+:10F9F000D2C78D86F251A29CA96BF758A17C6C2FBF
+:10FA000033433A1B857209E5BCD37CA0A57758CE59
+:10FA100017F6AEDA81E2614C3A7C8F902745CCD75D
+:10FA200019E9E06A8FF1FBD83D85C7905FC7328D39
+:10FA3000FAA1EFB91CAE09AE30BDFF3EA54D1E794F
+:10FA4000CE025F87E2FD0F1663FCE16DD5BB9EB56C
+:10FA50005FEFFD026F2B849F82FB48E87FB844DA9A
+:10FA6000BE3E87CF6B76DFFD044F0DE0097C1BB2F5
+:10FA7000B4D424E1381F301A2773A6DE84F9413E3E
+:10FA80000FC338F1D25C66F7227DF637511CC4ED06
+:10FA9000778EB240DEBD963C1566D658C031202C1C
+:10FAA000179E4EC925F8AF60354D49503F69EDD7D7
+:10FAB000AC2BF90FCE514E9443D358CCB8E646B197
+:10FAC0009E098F77D5D00F4BB2297A30C63A368A45
+:10FAD00075805CD880F2E12ADBFE814AD7B05C41B8
+:10FAE0005796FEEF9029B85169DFDE662F781AD756
+:10FAF0003F6826EB20CEC9E731DDE6ABA77A7B3C39
+:10FB0000B43F512EE5F33413D3806E6E126473D379
+:10FB1000DAA6FF903DF0C3D9B3AAB4B319F5CF70FC
+:10FB2000BFA07CAE2388FB07E58DB9018A0FCD54B9
+:10FB3000685FA3B2F13D1FE6CBF3F29C24D7121409
+:10FB4000E5706F32D11997631A3B2CE945158B820A
+:10FB5000FE270BBD20FD79D0032B1200FEE56BD7ED
+:10FB600035654095FF01858F78DBABFAF7DE03FD45
+:10FB7000DE00CA69C1004C35564271F474EAE77A76
+:10FB8000D14FE03BA61CB685C7BDA17137AD67AFAD
+:10FB900099056C404CE6917C68F36F93687F15F48F
+:10FBA000298D3BC956371AF5DC494B6B3F2FFAD7E5
+:10FBB000DB3ECA0E003D7DFABBD30E0678F84C6BD7
+:10FBC00075E0F7A30BDF77E800BF4F17AA4588CF92
+:10FBD0005B85DE90F03E22F07EB9DBB70FE17D5B06
+:10FBE000F58F83FD91719205A924EF670561861158
+:10FBF000F6C39C4D0968D1B4E52BEA530C79A907EB
+:10FC00002AACAC2A565CB0B39BFBF3B336AFB374EB
+:10FC1000F6E0F8FE561CFF28C85BC4CBD1AD8E20A1
+:10FC2000FAB3723E659BFB5BD0BEF8ACD1CA42E82A
+:10FC3000AF68CD6666E77244017AF00BBC47CF73BC
+:10FC4000E7CB09D4DFF487B9DC2985B116005CFD68
+:10FC50008DB348BE44AF63FAA79EC24E00EFE9F7EA
+:10FC60008126F7F0FA0B016FFE05F77E8DF65AF448
+:10FC70003A4B034679337599312FE560B9C037B0F7
+:10FC8000DF32B47BA7D719EB9537DE4FFD97A39CE6
+:10FC900092DF61FDC96E61870E6643502ED5D8BBD9
+:10FCA00026F9CFA1774E548381DA93B1E3D5364A52
+:10FCB0008F56334AF7A5707A9DDBF8DE5D4837F33F
+:10FCC0001A9EB3603FB5C1D1CE6150C5DA081C851C
+:10FCD000F625EE1743D329B85F0CF3ACC18964E075
+:10FCE0007EB2AF9B1BDA9B9D51FBC7627D2502FE56
+:10FCF000CCEE22FA2AC1F5F4C3EFDA3791EB39B52D
+:10FD00006BA00DC7EDEB16F27608AC4BBDF075C9D4
+:10FD1000F5C8F5C9F20A15E82C467B49DFFB84DCFF
+:10FD20009AB661C2D24C0045CDB623E41733619731
+:10FD30006B023F9A7D39D9E51A03BB9BAF53D8E5D7
+:10FD40006C0FF2ADA4B3683A2A473820133B793BD5
+:10FD50009BB0D7DBE8A7F1018287C433F0473ADFD5
+:10FD6000C70BA5E33E1ED0D1A1283A32E4A7D7198C
+:10FD7000F35F995B7290BF815E0E45C2F7ABA8F34B
+:10FD800023321DEEEE4AFC36CDA3173AA17C3AF39E
+:10FD90002D75D2FAEB082E47B5BA9DF720DF6DE03E
+:10FDA00074FF99C07B83DB57EA267DA5F7437D3539
+:10FDB000727186EA867AA52B1427F2D3D4DAFE85EF
+:10FDC000C88703984EFD4DE9C0DEAA7173F89755B8
+:10FDD0009999059465198C8172AD6CAB1AE4712BFD
+:10FDE000DD5E0C789829F05071DF73960C486756E9
+:10FDF00095733B20C8F905E04A76C0EC154DE457F1
+:10FE0000835F1193DFA41EA8A8379657B215848785
+:10FE1000CA287BE0F792CFBCCC8BF4E8BFCB615310
+:10FE200092CEBF5ED63E6E42719553BB7A907D787E
+:10FE3000CAE3E984F5FC89FC0C8DA2F987E07780A0
+:10FE400013E9A3D6450941B47FF79F01BF0E6D3278
+:10FE5000A77F8805E0D2F2AF6CDA6795F429D75313
+:10FE6000695B41F459C98C7E63293828180F2DDD50
+:10FE70009812C4FD71E8BF5F03DA151BCD64370427
+:10FE8000D8FC740674E65B62267958D6904C7E6B7B
+:10FE9000592DDF4729DB9C1C54B93FBE07E31012E4
+:10FEA0000FFB6B0B2C1984A75C2FEA35D66036D07C
+:10FEB000B7C44FB4DF377B59D3CE744FC7718108B5
+:10FEC000FC1CEA003F8722F1B3250A3F6C610A97C8
+:10FED00033B7BFD603F78D4E55C579D5187E84D478
+:10FEE000432C0B08707038BE569429CE3469DE342A
+:10FEF000C4E7E91583085FD1782AFA692AE183FD0E
+:10FF0000CBC130EE3AA51BBB6D227CBF4DE1FC316D
+:10FF1000A5E6EA22D4D76FBAB99C7917E4936E614B
+:10FF2000EC3D904F3AC8A7F7416E61FE83EA74CA70
+:10FF30007F54EDA1F4E3EADE941E12F6BCE41B202C
+:10FF4000000BDA51EF09FDF89E5BFA4177A4A3E9B3
+:10FF500050F4D3FB834C406BA98159D78CCE66EC0F
+:10FF60005ADDA8EF265F6FD4672D6667613ADA7DA8
+:10FF7000F729B4BF50E61B6EA8CF348F6502FAAFE5
+:10FF8000BD0786BF933DE7B14C047EBF695C8AA183
+:10FF9000FEA4659D0DF9636E0FB71B8BBA19BEDF0A
+:10FFA0005C7289215F7A06803010A9D94578B8C380
+:10FFB000C6847FEDE2714F71BEE49BAA219D7E0352
+:10FFC000F3FDE62D339547E343E275DA6A13F3C395
+:10FFD000D4A6AE86B541BF87EA004FD0EE8BBD0EEA
+:10FFE0008674BC74F3C07786427EFF6633C52FF7F4
+:10FFF000D7A6AC44FB68FFE6D4448C8BFA97AAC220
+:020000021000EC
+:100000008E705A5884BC2AA85D44E74E4A83562F06
+:10001000D90B3B024FC8BC4741BE679C5FF6A84165
+:100020008C5301FEB87FFFB495E2F247C16E738234
+:100030005E38AAB05A4C51B12441F9BF9B5383C8D2
+:10004000CF453FA97A3AD2D3D37162DF45A1FE8E64
+:10005000BFD763FD72A22F4F7D88F8D64AFEC0D469
+:1000600016BE3EA60CE88CF83F9ACCF4649844C5C2
+:10007000FC8FF66980A7593D9BFB85A05D496E28E2
+:10008000F5466877628399CEA160BF4EC857FCD50C
+:10009000BA8ECB11BDD3844B23E119EC87EB9E6262
+:1000A000F265A7027D1D9F11EC47F26C612AF155A4
+:1000B00034DC0F59FC04DF00F28112968F613EE3BD
+:1000C000FB6920D43250CE4C357BD3503F1D5A6152
+:1000D00026BB13F447228E0F9C4C747C48F314E229
+:1000E000BA0F2DCB6528AFE4B8652B54F23B90FED8
+:1000F000A8FE2AD50F3602937A2AB04CF1B34EED02
+:10010000E9E6D7B70FE984EB89B66F65FA15F0AA6F
+:100110003FC25E98BD4DF5A1FFC1F25AB4EB2F8DE1
+:100120005C472DDF5F48E7FDDF21E4FADCAEAFEF8F
+:10013000B39B50AE774B42BFE2D81E95E8EC58D740
+:10014000BAC1E9DDF0B8C8AB837F03F92F8A038712
+:1001500035C83F61F55F930AFDCC31ADC841FFE87A
+:1001600064E3C195C3A1DDF167CC5E1C76F6D3B321
+:10017000BA50DC5DD8D7EDE55628539CF3C9500042
+:100180009E733CF5A4B73D9B61105A7F90FB49429A
+:100190008F3B1F52D096620707399663DC622AB004
+:1001A00047A4DD7DD0CCED8292542EA7A47E5F23A0
+:1001B000F2534D9CAED9CB0AF96DF067D003522EA5
+:1001C000CF49ED4AF5DBF432AB27793503CFB1C027
+:1001D000FAE66EB20683B9D4C6897C3E8BA3873D0E
+:1001E00095EA213936DBF2CC23C843E5AC99E67DAC
+:1001F000DC1C9CD19C8BEDD7D5BAA8BDD94BF15353
+:10020000A14F6CC040288FCA05DF55D429C110F119
+:100210000DD78BD345FF0CF54C84FC6AAF578CFA95
+:1002200064BAD0A3D35954FCB5CEA8DF7C09DCA9AD
+:100230009D0DE3A2BE0CCF0BEC6380D90C7F70E761
+:10024000789AB7E20DC69847396B0DA938EFCD3CC7
+:100250000E1F3DAFE8755CE83C6778278C4ACE8B73
+:1002600018376ADE12DE14C08DC08384FB8C0087D1
+:10027000E78C4685F0F5B9B0CBE08FE2C612EFE52A
+:10028000CC371ECFD7953F04F232374C076D7AFF3B
+:10029000B920ED377CC1EA12ED40F773573F37E9DB
+:1002A000726CB7F63DF22F4A5CA11EA664C65202DC
+:1002B0007B96175D11639F21CA3EF8A5E083B3D7F3
+:1002C000068B76008FE91B543DAE9FA11EB597F6B5
+:1002D000C1CC40C08271C99922DE77BE795662BD19
+:1002E000011732DFD8F6CCFF75DE7B5285FFD4CE06
+:1002F0001EEA11D38F6AB383CEA37F3F3187B251F9
+:10030000FFB6666BA47FBED1BC1FE5BB511FF720B3
+:10031000BFA023F93A43E8E1E9A897213DBCFAF9E7
+:1003200044F4DB3F7FE879DADFB43C333D11EDE2A2
+:10033000C3ABA7AE0C004B1DDE3C95F470F91AA9B7
+:1003400087FD9648FD5EB0BAF4CFBF43FADC144790
+:10035000F1F9193BFCC2EE0679877270359777EC9C
+:10036000212E0FCB515FF5257DD50BEBDD35C3DF9E
+:100370000BE93CE23BE9B1BBA6FA87507BE60CA156
+:10038000DF05923384FA4AEA53A9673593DF9486EE
+:100390007A407DEB83BB61FD5F6E51C9BDAB50D729
+:1003A000E53831EEDF81DCFEF9F036B5C13BF7020E
+:1003B000E05D86F026FB87C3FBC0320EE7832B3857
+:1003C000DC976EEE9688FEED8165DDC8EE39B0B93A
+:1003D00007C17BDA728037D9BD1EA3DDB30CE08D77
+:1003E000763EC21BC62DDBE111F0F672782F137A30
+:1003F00067054FA7B5836BE056942777FDC5EA459F
+:100400007D7E342E948AFEC8D1E75486E70EDAEC5E
+:100410002261BF4838FF9BD53D8176543B7B669572
+:100420009561BC72D60B8E2083FC7125BF1322E030
+:1004300044DDEB89385E78FC363B66705AA41D7348
+:1004400081F899C77C742E7F5EE3EB7BD18E577465
+:10045000EED7CFB3D943C8B7E0EF9C8894E78A07BB
+:10046000651AC649BC361BD24116F3F8C8AE91FBDB
+:100470003F7E86FB3FDFF6F8FAD6F9C4CFAD3D23C9
+:10048000F7492AE343668C2FB53EA710BE2BEEC872
+:100490004FCC67B8BF5445F3B82E8DEB6345D729D1
+:1004A0006E6805BA8987F126A579F8778F93C71109
+:1004B000D7C2B88EF07CA3BF8F47D2437D6E8F1D0D
+:1004C00087AD15E354A826F23BE65AB8FF21CF7753
+:1004D0004C15E553D3B8DF3E2B8D9F9F3889F17DB6
+:1004E000E8F7E4AA04715E7914C533DBE227126EE3
+:1004F0004EEDAB3679857C25E207FBB00DCC739AC7
+:1005000055C47341C562FB5B44FB5BEADEA6FD3567
+:10051000F05C1E47BD3B6581D58BF66B609B95E813
+:10052000EEDE78BE1FC2DC491AF2D1CD42CEDE52D9
+:1005300077BF0FF731A7D425E898C2380126E2A784
+:1005400079B89F9A69A1F86989ADE51974B36F4BC1
+:100550003F78A70D96B6C8C4ED96452E46E7632EA4
+:1005600003B31DE3B17874E46CCAB9E8C7181F9EE1
+:100570008B71DA618C13D65082AB210FF0A5FC9AF7
+:10058000B4D1631FCA62EC9FCC7329E27B2EC206F2
+:10059000E9A13489E200D762BCD885A946743651F6
+:1005A0006301134F9761684DC68FC78B75DF309419
+:1005B000859260BDA1DDCC10BFBE31640AF5023C5E
+:1005C0005CAB859A90AE4D368F19FD015F9132007C
+:1005D000FDE4B98B2F6CBECFA4F968BE734DFC50FF
+:1005E0005FEBDD4A703DC0E9166072A4CF5B35B6A3
+:1005F000431DC0F187F457E9F204A8DEED9CBE6507
+:10060000DC5CE2A93F741F09DF5BC4FCA09F658925
+:10061000D8DE123B7EF4529AF483B9BD3947F0EB31
+:100620001C496F9B8D7CFA31F20BD457D0AE05B8C4
+:10063000DD22D28EE8FD43D1FF8769DCEFDE7191C8
+:10064000E355585988D6BDCD4A7894E35E2BD23D08
+:10065000693CFE26E721E999893894092407D2D11B
+:10066000A1BA1AB29B6646C5815964BC4A8D956F82
+:10067000933FA6B3985A5AA7E17C942BE3BC48D782
+:10068000B758EA7B54D9DBD793FBB125ACD9CCEF73
+:1006900013897896D057A3557B6FF4774A94782FB7
+:1006A000DABF27F31D015312C65BCC84DA12A00710
+:1006B00094CF9FC4F1FDF72949778D47BBB024D172
+:1006C000A2617A1B6B76E4E686ED92A5F930D94CEF
+:1006D000A4B2C0581DF235284F78FE7E3D8BA24350
+:1006E00022BFE44DDCB7B8FE07C03FE5978ED54189
+:1006F0005E9C7C4D94B37BA9FDC925828E03F78F48
+:10070000C5FA271F96E575BCFC3E59FE10CF3F2069
+:10071000FB17F95551E58BA2CA1FE379CBA30F8DC7
+:100720000DA03D2BF6634A8629244F0A059D952C82
+:100730000E117C4B4CAFF274240BE17D89F3D51B79
+:10074000D0C957887A4B751C72A0DEBE3C432F443B
+:10075000BB6340AA3FB913A4B32728010BCAC93D04
+:10076000C19E42AEC73C675D28E8F6B274DE9F8446
+:1007700037F493D929F5E2FB7919E735C8D04FB79B
+:100780009FD3CFF2F6F3E9FB73FA3919D58FB48B07
+:10079000EECDD4C7209CD821B7E1FCDC9CDF7B9355
+:1007A000D0AE62787E0E403F67717DCE40E87FCE4E
+:1007B000B32FE5CC88F0BBE79D31311DECA7CA33E0
+:1007C0008CD22F9A3EB678603EF3B636590AA15EB7
+:1007D00025A40511F39A2BCF8FB2166D62845E1F8C
+:1007E000D7C924CE25AEA2F9CE79F618ED5BCE316D
+:1007F000D51F5E83F19E613CFE16BDBE3CD16E1FCF
+:10080000EE23C7B0DB2776E27AF8AE2C7D02AE731A
+:1008100020CA0C480B6A62EFC3FF49F45712CFE5B8
+:10082000DBD4C10E9BE732DC47F5D7E0BDAE196BD8
+:100830007307601CF786D491B710DC3A8C8BB6F244
+:10084000B868238F8B96B89AEF00E1CD1EE9B4F516
+:100850007E1BF871631F957C062C0B6D8BAC32FFF1
+:10086000E6D8515914E7A2FCDD8FEEB83F00FDEC4D
+:100870008AE7E70CA60CB9341EE5424B6E82C90923
+:10088000F2E25677E923388F2943AE28C4EFF956B0
+:1008900047CF521E5727BAB8D5EDBB1DE905EB630C
+:1008A0005CC36FE1712EFF1B2AC5B9FCFD12FCB1C0
+:1008B000F6A92B3B71BA79A49393D25D8066B43BC1
+:1008C000E43CE4F860A8DCD10CFD1D5A9CD11FEF7C
+:1008D000CF35B8F31F26B888F11BDCFEC59897E327
+:1008E000C372FBE1F70B9D47B5C0C7C3026FBE11D2
+:1008F0002AD323FCC589A3120CF9EBC7A5303D32DE
+:10090000DE7A7D67437E72493743FD9BA75D62288F
+:100910002FB636E7555D84FD5BE970C4A31DF6690B
+:10092000E3BF3FBC05EDBA0DAA5781F5CCDAB6F1AD
+:10093000C3E150EB141E2FA5A0A787E25EC7F15CB0
+:100940001AF29EA66B91FB355FB2663ACF17B11FC4
+:1009500060D87799E3DC41E7097FA9FD9AAD9DC492
+:100960007EC0003C8A8CFAE8038AB3CDB3F3F57CF1
+:10097000F9D27E0BDD0340FD01F43D061BAAC8E75A
+:10098000018A431734ECA7FB56933A71B93C2FEB1D
+:10099000760D2C32560929CAFD42904F49401FCD91
+:1009A0004DECD2AD780E37D741E7262ACE4C642CD9
+:1009B00005E928D0F776A837675911E5E79D89A79B
+:1009C0007EDF559B0BE9BCF58B0AED1714779EB2C1
+:1009D00018ED51ACFF6B18AFF8BFC714217CE66D62
+:1009E000E5E72B8AD57FE6613F73EB8AA87DB1CA24
+:1009F0007629601F8C2DE07AB618753BE4D5C18E40
+:100A0000E5A85F554BA8E79F509E581C244F92CEF7
+:100A1000DC4CE3579EB151FB4F84BC30B7F0798D6D
+:100A20003EE3A3EF12EF073A7535DC0F34A76ED023
+:100A3000CAEC589F51FD6BCEFC8A52B9CE377AFF73
+:100A4000C58D72CC9CFA4D219E277DC3AD38C9DC83
+:100A50008892B7A7AB8624B118F2A86D9C33FC7CB2
+:100A6000B2F50C3FAF7C20433F837C3D7E618B869B
+:100A7000FB37CC6E7322BCC60FEDEF9911C147EA6C
+:100A8000AB3759102FE687DEB3A07EB7425A10511C
+:100A90005E21CFE347C9E39FDAE4F1224AA57E61F4
+:100AA000E937913D7AABBCCF2AF8E40B212F64FBE8
+:100AB00066A471C4E30B56F29FBECFF027A7433F55
+:100AC000CDF96CF216928FCD39B86FF24BCD1FF085
+:100AD0006C53C8BE6FA1F3FAE3877A4CB81F9096A7
+:100AE0002ED7C1F9F57CEB50D3F93ADE55D902EC9B
+:100AF000F7DDABAE6AD6A1BFA67B060E44B92FC701
+:100B0000ED956EE1FD3A5B7F407FAEF2E5040FF2BA
+:100B100075313A4779613B16BE338CFF55BE6C5D2B
+:100B20008FE7682A13C19F85F10B5E890B211D3762
+:100B3000BD12A7A17E782ACBDF0BE153F04AAF515B
+:100B4000E8BFE98D568DE2079DF4DEE9833A9EEF1A
+:100B5000F9E453349D49BEF42FE3FC522AE8B44C27
+:100B6000F09F5FF0D1E9AA4EC487A717C2A4719F76
+:100B700073A172E956B4073C0E3AFF23F9B218FD8F
+:100B80001EF85E7C4932F97F117C477C38F78C93E4
+:100B9000FAAB38E3117CEEA2BCE4B732C12F566148
+:100BA000474C13F43D3CD37F633ACCBFB806F81DE5
+:100BB000C6F12FCEC8433E0AD38BC5897405F49283
+:100BC0003E23826F6A9A6E62687F58DD3EA2976903
+:100BD0009046DA1FD3DBEC0F67611ACC7B7C6DAEDD
+:100BE000E1FE4989C0FF85D2FDD582BECAECA11EB7
+:100BF00068AF9AABE2BC789FEE949BEFCFCCBF8FEF
+:100C0000C36FBED95780F6C3FCC7142F6086EC0AA9
+:100C1000944783F7565922E38D379DE9C73C0087F7
+:100C2000EBCE74A7F48654FF6C8443E99949025EC5
+:100C3000FD7ED63EE0209DC797CC41AB771DEEB33D
+:100C4000C5F955C4EFD16CE67C3022BE84F1308CFE
+:100C50008BC9FD41196FB2E27E6A849EFCB756973C
+:100C600083FE4EBBB853BE711F6D6ED33F079BA072
+:100C7000FC78AE4EF1A729267F2DD2F3EC89C1670F
+:100C8000CD909FF3C0F38918EF96F0ACD7423D505A
+:100C90004FD6031C310E56BF422D0A727B2681EFC0
+:100CA0007F71BA96741C4DDFB3CF74257A3A5D65B7
+:100CB00025BD731AE89545E81DA96FA47C977A476E
+:100CC000D27385C6E556853D89CE5584F5CD041F82
+:100CD000C671596FC5DB8345EA9BF52B8721FD9FC4
+:100CE000747BF1AC4F34FDBF589D4EE76CA41E8958
+:100CF000D637529E4BF92EF5D5DA0CFF8B88F7913B
+:100D00007FFDFEF97FC1A76B34AEB7AED11C443F67
+:100D1000172E37F70BB9B9DF2037E77520F71BD34C
+:100D20002F4EEE3F2DF805EC57B20B51AE47F6F7BC
+:100D30007DC6C87711DF7BD2793CE0979A7747F27E
+:100D40007E4F1BFF5E98BC6F12EB3D9FBC3F22E4C1
+:100D50007DB47CC70B6D28DF4F6EEB43FBD3FB18D4
+:100D6000E803D47B8D099E8D42FE937E884F0A9EB8
+:100D70004BFEDF9535F54807F2FFE8FF45FE4B7A5D
+:100D800094FC22F943F24334FF487E187B3FF87FFE
+:100D900088A777F9FDA90A2DB099F60F3D09FD91B5
+:100DA0002FDBECB6AD0AF1593BBD20F826CC274627
+:100DB0003D21F942F289E48F0AC10FD3A3F861BB48
+:100DC0005AFFE03068579DE1CFC81814E68BB95B35
+:100DD000A2F542877485114336DD5DC590AE2A20A9
+:100DE0008DA42B6B07FC90937171FC60CFB8307AA7
+:100DF000EA9FF1FF9C9EFA67C4A6A70119BFA03D18
+:100E000071BAEAA33CBCCF743A0FE46C6E98DEC6AC
+:100E1000BEC9B8BDD08DDBFDE037D2BC7759B22951
+:100E20009E33F62C3FD72AE952E259DA01D3453CEA
+:100E3000615EA66F52466AD85FB8503C5BDDCD1646
+:100E4000F443A6431AA9FF3BB2776FC9B848BD9FC8
+:100E5000716176E2DC0C7EDFFD17B4137F83F088CE
+:100E6000C62B73BA0C7108D07FD791FD16D2E888D3
+:100E70004C877EC56A0E67995F12D2A4BE4D417D34
+:100E80000BF4B200C7FBB9F4525CC0443C70D738D5
+:100E90007D04E0FD0F22CFDE1A877C3869A82CDFA5
+:100EA000BD42D750EE301947A7B8C8BBAAC807DE65
+:100EB000786B14AC7FEC832C1C6787F2D12392DA19
+:100EC000E2280A0BD77FF4B1D7DF5A4178E6E75E14
+:100ED00098BF45E3FB4C229F077947447E68547EC8
+:100EE0002DAF9FA8B5307E4E31C8F955C5AD374EF0
+:100EF0003FBE087B04305988E709C66F559C180728
+:100F0000B979C449DA8F0DAFFF9FE3303E3BAF5153
+:100F100011F90FDFC2F5DEBC95E7B73DF6AF15015D
+:100F20004DF497467132FA33D72B3A9E7F983B5453
+:100F30000976CD6D0FE76D1946FF06FF34637B869A
+:100F4000E7EF2EA63DE299DA77A5F621EB458C7FF7
+:100F5000E388D8F712DE96FC25E209D43FC0F2BA46
+:100F6000FAD8F7243E10F59B71DF84E0757205D244
+:100F70004FB345C2F3AB1508CFD18CE73F7BECAB49
+:100F80007181BE7CFA7AD4FACF35FFA60CA3BD805E
+:100F90007F1E63FBD0B9E0F77ABBF6827E661AE962
+:100FA0002949F3ED380DFD2481FF8F76F13C5FDC9C
+:100FB0000AB4FFC3F4F11FA28F6619CF6F47FFDF9A
+:100FC0008D1B6527FB47D4FF6105CA379FA9AD3E3E
+:100FD000E707495FD0BE377F9F8DDAFFE7B1EF5754
+:100FE000207C003F544E79ED1CFC501F951F11C50D
+:100FF0003F82FE897F51CE037C7AC49033E9999C6D
+:101000003EBE14E7AA9B47723BB159DC9B1A9AC9B2
+:10101000ED424F2687636F51BF393E020E1178862D
+:10102000BF10FA2111EB2638DDE496EBCE2A1ED74D
+:101030001DDABB78F980CCF4070259E17C747F7922
+:101040009959C5185F0DF79FF936C2F52601B7A16A
+:10105000999DDF0E7079A8205F561081005D6C5558
+:10106000022AFA09481731D6CD32DBF15520AABD44
+:101070006E3E477B4BFBF67A547B66CEBB98F602FE
+:101080006FE3A2F05A1485D75151F912990F1AE45F
+:101090009F948B650DAB96A4B9312EA9D09DCF300E
+:1010A0003DFFAA18E9798E53D2EF2504D7303DF7DA
+:1010B0007D1BE5FFC47A290F2F7D4007BC4D407989
+:1010C000382C9CBF0EE505E5FB15EB4991FAE2B221
+:1010D00007507EDEB84CD6F752FD9B6B657FFDA9AD
+:1010E0005CE291050614135EF384BE080C7C1BCBF6
+:1010F0006737F2F673D6E4BD1DE87E0E7EA88B82BC
+:10110000CBDAA87C20AAFE43E7D12FB551ED1746D4
+:1011100095AF88CAAF8ECA2F33B62F9DA6101F96E3
+:10112000023D2022CEC797F764B6D9A96DFA54B113
+:1011300093DD66E0ABB1353CBF644D7EF1B2BE11CC
+:10114000F9CC82E248BE90F77BAD6E467C61EE4002
+:101150005EFE3AB30379D93B5ADFF2F2CFF09F1922
+:10116000B4BF63B00BB6ABC67C932AE73DE1ED3B61
+:10117000EC11FBA0CC578CFE41C7FB2DE38B474500
+:10118000DA2581E262A44BB94E59BFF0C7B32A8E6B
+:10119000F7A7CCE2E20DB89F3352EC43BA780A7A53
+:1011A0004D45BD5929E23185783E16EBC5877ACC8D
+:1011B0008FB443587D4F5C67D33DFCDE40A006F002
+:1011C00083F135E6B5603CA5292969C193507FFBC1
+:1011D0003DEA02D4A3FB16A4D0B9A43399DC5FD8AE
+:1011E0009ED4256D3AE49B126EB3E0FDE4A67B47E6
+:1011F00053FAAAAA2F6D055E7B694D49B1BD0F96C2
+:1012000027117C5EC89C5CBC08E8BC012FED407BCC
+:10121000BFCB9986F71AD87233E3EFE5789F20BAEF
+:1012200079C0DA1FFDE7D24597D0BE55D9C3130A5E
+:10123000E9DEC21233ED67C01F9D3FF12F1F4DE75E
+:101240009EA6D58A343086D2577EFA4B4D22EEDFE9
+:101250003FAED07D892BBEA97F13DFE5295FD6CDB8
+:101260008BA87919EC7A3C8F7460752FBA2771308E
+:10127000AE8ACE7D427D86F5CB7FF0BC333E0FEB50
+:10128000AB4E3C5A7118BEA33D7CF83E75BD82F34F
+:101290004A74C4E379E9C33F7ADE41BB16CA9D8B29
+:1012A000E1FBE125B3D2D0CE3AAC78121558FF0756
+:1012B0006B6617A767E0FD7AABC0E76C4729ACBF48
+:1012C000D4D4462FA43F6624F3FC0799B38B37C2CE
+:1012D000FC0F3FD68BCE7D8DEBAC7F980970CAC8D2
+:1012E000D23FC2F4A0B877FCCA4F7CBFF01F27CA18
+:1012F000D2305EB75FF0CFCB67CAD2CA22EC9D195D
+:101300005F6A84F7572C9E3B709EAFC4672B743E78
+:101310009BD5A760BC7B9AF03F807E173C1FC3EE35
+:1013200069CC54A9DFA6FB5347205EC3747C37C940
+:101330004FF21B207F6ACD9DA4D70E5917B083288A
+:10134000B7C4F94586AF0D21FF6D8E0BC6E562FC73
+:10135000532FD4C98FA9EF39D111C177A2FEA701AC
+:101360007E3EF753A88FFEDBA781FF7144EE43C892
+:10137000FAE5898E001A13471C0E0DF1B04FAB3EF3
+:101380008CE7FA663C6E26B93FE3F1D485AD286F51
+:10139000805E303E16BDAE2B3B9B793CA2233E0CBB
+:1013A0002C35F2215B7A4E3EB4FF69C939F9B05C45
+:1013B000F829858F9BE99C7AF9208786FB8F231F6C
+:1013C0007F6D23DD5BBD3D6E00DE4F287FDC4AF87C
+:1013D0006A7138024EDC1F4D7468C9906676E6F873
+:1013E0001DDE99F34D81CA34DB004AE95E82DCD709
+:1013F0003BB6E0C147F018E571169C3404E0770A6B
+:101400001106703925EF6545EDF355EC7EDE92CF80
+:10141000CEB1CF779EFD3DBCF18C7C78A1FB7CFDED
+:101420003B8B73AE6DFB7CE69EB88F582EF6F90AA7
+:10143000D6F2F35BE50BF83B1C05293CDE7BA83AB2
+:10144000808FDFE27A034EBC9FFB10D72FE54C095B
+:10145000DAE09F63D6DE4EEF933E2DE44A29BEA329
+:10146000D517F9C59B837EFA8CC7E308AEE54FCC50
+:10147000FAF03168D7B2A8D81DE9178FE96C9670D9
+:1014800065784F57F67364D1EF7290EE0BFE0CFE49
+:101490002DDEF74B66CFDE948B78CAC8C1FD485964
+:1014A000AF7CF13D3D793DF08FC10F2EBD4FE5F78B
+:1014B000A65FB092BE031E4F6711F799A7D5EEB68F
+:1014C00058FA86EF7F1D803C5EA98FB80766417889
+:1014D000C97B49F8973E58D8DB1E921FF4BE70892D
+:1014E00049A1FB4B20B9E8DECF9D9DF97EE1ECCE12
+:1014F000DC8E2DCDF1D2FD978A9556EFE25CDE4F62
+:10150000DBBD6A3CE7646A9E41FB8F7FB3525CA4FB
+:10151000B2364E8F4BE4E722B6F4A573D19A05F7A5
+:101520004D3C5C4EDC29E8AFD233610CD20B94EF1A
+:10153000D5F01C9683CBC38A64F1FE1BB437C13847
+:1015400027F15FDD78BF19FD22C657C477E8C7933E
+:1015500018EE7797892DC3B80BD6EFD30FE19832E9
+:101560006932CEEF1995F81816BF7228DA77CFA82E
+:1015700003D1AF2DBD6F7BE16ACC3FD71F6F2CB07D
+:10158000D267DF277D3147E0BF459C072B833CBEF8
+:10159000AFB6B233D7F77E95C77B560A38493A9033
+:1015A000E515F7F1F350154BAC64BF542CFA88FAEB
+:1015B000AD7034A7A1DCAD78C14CF7985789799705
+:1015C0002DCA1EB117E8AACC9C44EF48CF0D145B7E
+:1015D000303FB74EA17CB85D6A0ED2E917B52F2611
+:1015E00022FD1C8C0BF5403DD47A7B9C17CFE1C9C2
+:1015F00078DB17B53DD6635C669AB3D981F791A6BF
+:10160000DDD1CD85727B9F3364C1F27DF5B926CCE7
+:10161000EB4EE708CCEBDA6594FF429C3BA13FA47C
+:101620001785E379EEE6ED96AE30DEDF047D7CF9DA
+:10163000CCFB3D514F55E434F7447D0274D0B333B5
+:10164000C2F96985F4F0BCCDFC9CBAA48379480743
+:10165000C077B3051DCCDBFAE26F901FE621FE07D1
+:10166000B4A723A0D31DF47DCBBA42C6DBEF403A2A
+:1016700091FA0BF2B56617C6DF441EC6C1FC8B0893
+:10168000CF542A1FC5CB037DF939B7163AB757296E
+:10169000EE2BB6C9A70EF0BC47E0B16C9195E4ED16
+:1016A0001E81E796FB5E48443C7EF9CCF69DB84F20
+:1016B00052B105B4B427065F08B854221C12691D44
+:1016C000645754E2BA13C37068A37FC18F958CAF7F
+:1016D00053AEBB52137090E5A2FD07826EE6320155
+:1016E000B7ADBD38FF097E437EA67776C4FAFC2EDF
+:1016F000E37BE2DF89F51D147A612ED005DECF622F
+:10170000783D51CA0928FAF2B97514F791F892F3A5
+:10171000B66779A4BCD3935D613CB69862BFA77CE1
+:101720005AC06FFF924E390D00B72FC0BFA273038E
+:1017300040AF5AC478926EE478057F9D700DAE1765
+:10174000FA0F61FF72DC7D81040DFBD9C7387F2061
+:101750007DA2FC947C595033E59AFE78EE37F0A5D3
+:10176000A35B5F5C2F1FDF9EC5CF2DEB6827407BFF
+:10177000BD41A1B8F37EE1CFEF5FF2626259049CF4
+:10178000E2B338BD4B3AC33F8C47C9F9EE72F1382A
+:101790006EF4BCA51C92F32EB8F7C66BF0BB9CBFD1
+:1017A000A457499F128E924EE5FDB7687A255A9349
+:1017B000FA5335C87BD28F63B2BEB6F8EDEDBF47A2
+:1017C000E7A51D74509CDF6E4D653C5E5F9BBE239C
+:1017D000F2BE0FFCD923F54E843E59A145E813A96A
+:1017E000FF2BDD3ABDAF322F8B9F2B39CEEA2DF97F
+:1017F000D0EFDCA3CD85899EB0DD79C5372115DF1B
+:101800003599BB959F3F93F09E7B6207D17D85B84C
+:1018100097547ADFFBC54390BEFFCB4CFB31A54B01
+:1018200046D3FDE3591BA70E46FAC1FB0C28CF8F08
+:101830006D1834903FCBE54C9B84F71A363C38E961
+:1018400066F83EAD41F5925C877E905F4BEF1CC819
+:10185000905E0EC6B5140F437BFD6ED589F6FAF087
+:101860008D831662FDE18E2EC9B81E7D430AE57593
+:101870002D89F482B473E5B9BC1A33A787C9599C82
+:101880008FAE6D4B399D15D4D4F4C4FDF3D675716C
+:10189000F49E518945DCE3DCD689FC894A0B5E293C
+:1018A000A47BA16487CDB4305B063FEF6CCB80EFA7
+:1018B000BBCDCD77A2FED87DA7A33F9DAB577F18A8
+:1018C0005CC6ED67BE5F98627C3F48CEE346317EE2
+:1018D000747FB2FD2E71DEF8A098FFB1DAFF9A8412
+:1018E000FAEFD8A61E2E5CF7916D71740EFF48D4E6
+:1018F000BB8C177B4F0BE836EA1ED4627E6F20CB81
+:1019000068BF493A3FEF3DA54FDC51FB01E73E5F21
+:1019100074A29AD17DEA4BC1A7C0F6A3127E7C1EA9
+:10192000CFF5CDA8B33AF13ECB21A47B3ACFA3F2B9
+:101930007BB736CE07879EEB1F44BF71C627FC7E60
+:10194000D18E55F7D2B982E96057E251AA363BF9F8
+:10195000A15593900D4E79FD4B33A0DDA94DFC1C94
+:1019600044BB770B763FBF33F2DD828BB58F2FD42C
+:101970002E96718587B38CF7C0245CA57FF40AE0AE
+:101980007FE880309CBEAA9E4976F1896A3FA527F0
+:1019900095FD2B8723DD3A92E8BCFE3F1A1E54F1D9
+:1019A0009D958AADFD7F40FF76983DC989FCFA552B
+:1019B000F502DAEF3C515D4569F8FDDC20A5576C76
+:1019C0006DA2765F350C6CC47BAE2FDB9384BC8F2D
+:1019D000DED7E178ECE8FEAE5CD7F1BB393EE5BC82
+:1019E0008F6F9A9A88EB6AFA534AE3E588C7842492
+:1019F00027DA77E5E29CC7E1D5DC7E3E6A4B7A7256
+:101A00001C9E0F597B5D1ABE8333BDE9FA49F87DF0
+:101A1000C636C58976BF77DB8444F4433FD75A1274
+:101A2000F15ED3E7ABE57DA820BDD33AAC88D1BE4B
+:101A3000D3B090C63CB97C8B19E9E4F2131ADD3BB4
+:101A4000FD02F7A330EEF1433CC53D98D8679AFEFE
+:101A5000128F97B4F9B1C28F1B2ED6DD8ABFB39116
+:101A60001AFE5E30947F3FB2F6F9F1D8DFB10D6611
+:101A700027CEFBAB0DFC7D86D9E07FE1D594A39BFF
+:101A8000B87F33BB5E217FF8D826D0CFB0AE8ADBDB
+:101A9000CD3ABFAF69A4BF0228C7738D92FE66EB33
+:101AA00041A2EBE8F73392593DDDEBFAA5E8F1707E
+:101AB00096F13C661B1D76847F0127E45BA4438975
+:101AC000E7D9ABF9BEB9ABBE7F3ED293C47BF4BBC2
+:101AD00072351646F71202A6787AFF7782DD6356D2
+:101AE00060FDD7B95B46A1F89C98CDF5B85A60D295
+:101AF000F11E1AABE1F7F3DBC98F2C6E0FD56433FF
+:101B0000EABF73363F2F2CEF63C91416924DEFEFE7
+:101B100025B8FEED812AF6C76BC76B30FF09C35DA0
+:101B20007776F3028A1E5F3E5E03BA9D30D0F5429F
+:101B300057C8A765DFC7F397B9069921BF68D1FDDC
+:101B4000E347E1EFB264EBF1D911E3C87EE1BB23D7
+:101B50001BE6B133C5EFC4B4D2C2EF479D545AFB64
+:101B60002DC80DD77F4F61FBFEA184F32D6646EF94
+:101B7000C074C6F90FEA38BD255BCFE0E31ABF9702
+:101B800031B684CEC705F8FD16F8F3D9D2F0FE11B0
+:101B9000A7A73279DF6599F1BE0BF3F2FB57F21E6E
+:101BA00092BC67D4277C7F6AEDC5DC9F3A6986F5D5
+:101BB00026B5BFCFA634BE4EEF61D504584B1CE10D
+:101BC000C1787FA52281BFD337FF852F772059CDDC
+:101BD00092F60A2ADBC1E1FBFB2C9DEFFBDF29E833
+:101BE000F04835EBDE1D58F9DAE6E6440F4CF6C452
+:101BF000F8504FE46F8FD59F8FF03FB2B6266BBE83
+:101C00001BEF7D5ABDE3A0FED120BF573957D89BAB
+:101C10006C43AAE073357415D4DB95DB87DE6F184F
+:101C20009BCDF5F289DC500EBEA713C8E5FE0DD49E
+:101C3000A3F36B458BC7A462BD13CFDDDB7D3AE018
+:101C4000CD8AEFB7B9286578FFE96A3BBE854CEFCE
+:101C5000BA3195F66983FC9D31A897887ADD3335D2
+:101C60009DC7D1F9BD39892709FF76788129A03D23
+:101C70006AB23133CEBF0F5BEB447D21F123DF31FC
+:101C80009DFF028F9FCC575A6A5330FF8C42E7DF8B
+:101C90008ED8F8BD9EF67A6EA305413D73ED54C310
+:101CA000FB3CF2BDD05F3A0E343F5BC897FEAC7F81
+:101CB000E47BACE5A2ED68B5C483EF49CE4FB5D166
+:101CC000BB1DF31FEF46FA041C6116598FAD4D2161
+:101CD000FA589AAB129C6735307A77A7B82193CE21
+:101CE0002B8E6B70519A78269DBE1F7BF2CD3C2EB9
+:101CF0007F381E8A9FEA44EF47173FD56B24FFD1F8
+:101D00008176EFFFF07793ED36BA473B7F37D74BBD
+:101D1000F36F50293EC9C4FD709F988ECFBE8CE2F0
+:101D2000393E16FB1D589F7C0756379FF31D5809F7
+:101D30005FABC04FF4BBB037EC1E988E7EAA7C1709
+:101D400056BE63D72CEE6D45BF0F7B6F6221BD0F72
+:101D50003B59E77A24FA7D582D10E745FBD69C6560
+:101D6000E7EF35F8A3DF8B6DD170DD9346F0F762B6
+:101D70006F981CF12E02FCCF3CE26B92D3E611ED82
+:101D8000DE0732237D5B7DC6FA5B24FEFBB03EE7B7
+:101D90007C8F37CB42EFBC69F85E35E42789F77852
+:101DA000D18E43FBFC94CEDF95B3C6F37537B3BC3D
+:101DB00074E4FBFFDFDFA13EDFFBD3D1EF4D47BF74
+:101DC000333D70D71F0DF941CD6B0CF587EC5D6F7E
+:101DD00028BFBCE56943F9F0A35B0CF92B5AFF6EF1
+:101DE000A87FD599570DF97CF6A6A17E81ED7D439C
+:101DF0007EB4F37F0CF5C7A41F34945FEDF9C25095
+:101E00003EB6F769E37A34FF59D487C5DEEF0DEDAE
+:101E1000C633CF1FF01DE71BDD267AAF43C911F68D
+:101E2000B5A0BB1FB384DEEECE72507E8D564784C4
+:101E300088EE1A14E2F7683DA67DE1D3311EC75E35
+:101E4000E4F7BF92C0EED322C64BD66DE01086F306
+:101E500029454E433ED5976EA8DF69B2C7509EE133
+:101E6000EF6D28EF3CD36BC867570D35D4EFB24008
+:101E700037E473034586FADD96F90CF91E75930D68
+:101E8000F57BADF61BCAFB04671ACA2FD95465C887
+:101E90005F5ABFC050FFB28680A1BC7F6899A17C09
+:101EA000E0AE3A437E50F36A43FD217B8386F2CB5A
+:101EB0005B3619CA871FAD37E4AF686D30D4BFEA0F
+:101EC0004CC890CF67BB0DF50B6CEF19F2A39D1FAB
+:101ED0001BEA8F49DF6F28BFDA73CC502EED96B125
+:101EE000BDBF367E17764CB1F73F86F68191E27D15
+:101EF000E82D0ABD0F7D5B4E57F9AE684B1CBE8BBB
+:101F000018F051DCC78507FB504EE1BD6B173F173A
+:101F10005342F12337D939A48A3C784E07EC8044E8
+:101F2000F4AE7273D14E4E08DB63596723CEC99D60
+:101F3000CF1EABC86144E76B73FC6539A9E87F3CF1
+:101F40005748EF7BB3C0529C877CE7EE9DA8778D06
+:101F5000657AB5ED288B7CFF78775C5DD68073F869
+:101F6000EF57DB4E307C57B9AD5F11AF50607DF35A
+:101F700023FA5F09FE82D69DB1BA6AE01BB091FEDA
+:101F800058EDA4FC43D5E9947FA4DA43E9EAEADEFC
+:101F900094AEA9F652F9DAEAA1947FA25AA77CB0CE
+:101FA000BA88D2F5D53EFABEA17A32E59F04BF18B1
+:101FB000D34DE02763FA34F8BB58BE19FC5FCC3F21
+:101FC0005B1DA0B4BE7A197DDF525D47F9ADD5AB7C
+:101FD00029FFB7EA20A50DD59B28FD7B753D9537D8
+:101FE000563750FEE5EA10E543D5BB28FF6A753346
+:101FF000E57754EFA5FCCEEA164A77551FA5F48D78
+:10200000EA562A7FABFA0CE56B4DFCF740D6E41894
+:10201000F721645EBEC720EDBFF168BF23710C35A8
+:102020007F65B0DFA3ECE8687C1C1771DDF0FB096D
+:102030003DD7D744F84F4F8AF1E47B0CD1EF2830DD
+:10204000619FCA774FE57B0D33C4BCCA053F0C4284
+:10205000FAEC4DF4F9D6C5F80BD21F1C90EAFF1B21
+:10206000D167B62940FEB09DDF27BE21D5FF52CEF5
+:1020700020DC2F9CBE93C6737A69DFB0D81A4ABDA4
+:10208000318FDEFBA6B85C47E3558A73DF1D96BF30
+:102090007C2C0BEDE9A29F547A67EB1DB3837EDFA6
+:1020A000F02D0197B7724C86F4E354FF9B38CF6F45
+:1020B0001D55B79A60FEDF5E79FB93BFCE0DFBC95D
+:1020C000D7A2AB09FECD04E631D3B942A6BF968BA9
+:1020D0007613185698BF910528BDD5EDDF83FDDC3A
+:1020E000040637E6FDC3AC39B1D6153DAFCF72B8A3
+:1020F0003FFC598EC9905AD3FCFB104EDF3A749ABC
+:10210000D73B978FE989EB92F32A12EF8E8C67AD5C
+:102110004FE0FCBEDDF6F561A55B18FED21FA77B84
+:10212000FD28C76E57C4BB76EDDE11A0F2923B15B9
+:10213000B2CFA6803F83FB43F2DD805355667A0F12
+:102140001EDF19C0FDB353559FDB919CA11EC3FD3B
+:102150008D1A3CA003E53577F3FBF425F82EC60075
+:102160007CB7C0C6FB5DA810DD0D4FCBE5F79FC166
+:10217000DE23FFC9DD4AF7F4804EBE273AB95CA5DD
+:102180007BE7EF98823D15DA4F9E6E51607EE56EDB
+:10219000AFE17703A2E9609EB82F20BF037D99BB12
+:1021A000C0385FBD34A437C5DF5FBEDC83F0AA3121
+:1021B000F1FB43813754F17B4E5C44ABC32FA53810
+:1021C00023D3BC5E8C17158BFB264D2A5B10EBBD11
+:1021D000F05E5D38BEDE49E7EFE7D544EDB374E964
+:1021E000C2E9AA4B174E6FC5AFEEA67784E6EDE2C3
+:1021F000EF1DB2BC96BEB1DEE7AF5CF0469FEE11BC
+:10220000EBA86CD8CFCF57B096BE91E7C975D1AFC8
+:10221000A423D5E2F0AFB347CE8FD30FD0754F8450
+:10222000C3B7C940D7DD88AE0FE3BEE278AB27E97C
+:1022300046057F25807D85EFFBF8FFECA4F341F296
+:102240009CD034E6A3B41CC800E9D8175845EFB9B0
+:10225000CE66F5F47DDED0A9F47BA495AC75543A36
+:10226000C0ED86658B5EC3E7F0AEAB5B351AE3ABC2
+:102270001383A5AF613A61837218FD54E08B215D31
+:10228000301EA2542DC12399376FCE5F825B66E367
+:10229000558E0FF626C707D08DAEBADAAF13F8E029
+:1022A0002A6CFF6DB24EEB50138B0C7C50B298E948
+:1022B0008A3B7CDEBD8D2F86CEF90CB7D498D64AEA
+:1022C000FBE6952F5B5D88E7D98CEBED703C43EA2C
+:1022D0006B46743E87C57BB1DE7141D7C7B319D158
+:1022E000F57185D13D756947B21C7FFA806E61BD7D
+:1022F0007BDC141C9CD88DF4F2249CEFCEF4EB3CD8
+:1023000018079BE3B6D1FBA7C793833951EF7CD065
+:102310007B44328EB5D2CCE34AD1F35286EEE4BF91
+:102320006B616101DC9FC0DF751E8CFC8CEFE628C1
+:10233000F40E740BF2BD79A4CF13ABFF5AD1EFAEFC
+:102340001FB9BF1B80F5E0FDC676E338C538F17CC8
+:102350001CA93FDA7E473A8D19C6FB4D975CC2CF68
+:102360003B0E9DE6BFC8944CF226C3E6BF0BE94E78
+:10237000C675A41FB82BF74877F2D77FA8C942FBD0
+:102380009CDE2140FBFB4A2E97DE317BE8DDDD77CA
+:10239000F273297E2FE5EDB54379FCEB5A19EF1A5C
+:1023A0001115EF8A8AB7B011B1E35F8C79CD386E21
+:1023B0001FF689840FC5595E1DA1197E3FEA55E1BC
+:1023C0007F9E2A72E7219DEFEFA2D23A1353F8BB0A
+:1023D00021AD0E95E86C7BC06BC7DFA3582EE2A43D
+:1023E0002BA2DEBD5E9E37DF89E702AC0EFE9EE5C6
+:1023F0000323E367469E477FAD073FB77463CFFC77
+:1024000077915EFADA8323493DEB9A07E7AF88F5C7
+:102410005CE204789BD0EEF48978A7FC5D9351A42C
+:102420009F259E2F543F3FAD0517C7E37ADD8CF8FB
+:10243000CEB1DA46F253ADD74378343AB5E7C4CDDE
+:10244000843FCDD71BC7691A1CCFEC50FFDB260B8E
+:10245000C5A15E3695FD19CFADB77E6C6578CEA16E
+:10246000DED1594323B7FEC75F8DA2D431BC90BFE4
+:102470003FC912F09DCCFE4EF697FF462489FB61C2
+:10248000F50ADBC51F6BD513F09DB77A133B7D159D
+:10249000CC6B8B7DC0839711A9F9545CE77BDDFD84
+:1024A000AFE03C06B32ACA3F60F1CD5C07E33EE0F3
+:1024B000B2117DCCEAEE7B95CF932D1907F3BBB219
+:1024C00040A1DFAD5B227E97CDE18D37BCB7EB3B02
+:1024D000D393F4C5DB423ED7A6EBCD78B1A343B886
+:1024E00039B556C33B592C8BE273128E91F8720E9C
+:1024F00036E0CB6F8EC4D750C0D7A591F8D2958B5C
+:10250000C1D7935D18CD57D26560A467D5A83CAEFE
+:10251000C76AA896338FCEB7B6A34FCFE67AC86FF7
+:10252000D72E217849FA94F41A834E6FDF8EF23851
+:10253000DBE4C4FDDD7BC7C5937E93742BE9D5D264
+:10254000959FAF02BAF57585748ADD371A654834F0
+:10255000DD62DC2B923E4B3AA463E68CE4D7F1605B
+:102560003F24B9D0DE39BAA13E823E4BAABED6B8CE
+:10257000FC387B55FCE0709CEE7F012DB720EB0012
+:10258000800000001F8B080000000000000BED7DA4
+:102590000D7854D5B5E83E33672633934972924C93
+:1025A00092811038934C424826302480FC552721D4
+:1025B000D0F0EBF05783243A58B4412193026DA335
+:1025C000D77B33908001EC2DA2F5A1F2EC808A68D4
+:1025D000B506A51ADB889320DC685107B52DB6DA5D
+:1025E00006DBCF9FB64A10AF175B5AEE5A6BEF93DC
+:1025F000CC994C10ED7D7DDFD7F7A27C3BFBEC7DC9
+:10260000F6CFDAEB7FAD7DB268A6C4DEB130FAB9A1
+:1026100000FFFCF0EF9D62F81D7F5CF85456DED59C
+:10262000DA8DE2F915434BE8C7DE2D1EEC675AB68A
+:10263000A9981918DBDAE264CCCC58BBE4F5E5C004
+:102640007872D3A90DF87C8B0C1D1D8C853CE6F0AF
+:1026500043388FEC2FF6A70C8E975554E550B318DE
+:102660004BB9EC4FC93740BF4FB30D2A93E03DF54E
+:10267000BA276C93E0BD93C90CDF4BCD8C363C0080
+:10268000EDFD6F8E65FB60984FD704C62876C6B601
+:10269000B5C03EDCB89A708E612A967D39062796C1
+:1026A000AA939701277FCE447B98EA7B5CF98C4DF7
+:1026B000C6BA4FF4EFA3FEDBCC3B2D369CC7655169
+:1026C000F64983EBBCC2C89A3A60BED92A6C0AD6D6
+:1026D000CBCEB7AA8B53B02E51FDCE96DDFEDFBB1D
+:1026E000713D612A33178459A08C315B71480D41CB
+:1026F0003FCB6616C0F7E3E179BF4BA675587AEE7B
+:10270000612AF4CB747BA500F4732C80F13438C3B8
+:10271000BF45008AB472E8B78FF9D824848F2D1C86
+:1027200092868EB728ABAA574E1DFEFC16C5E10156
+:102730001378A09DA7E56FC64087076B4E03CB6655
+:102740006C23F65519ABCE875F70DE66F3DE2498F6
+:10275000F75A359DF6FD89A32A8D79869FEF7E383D
+:102760009F501140BDC542E5BE168585004F1E0431
+:102770007CC1FAFE1695CA032DC5543EDAE2A5F6D1
+:10278000C75AA652FD472D3EAA77B4D450FDC916AC
+:102790003FD50FB5D452FDE99600959D2D0D54FE01
+:1027A000A4A589DABB5A9AA97E45129C1BEEA738CC
+:1027B000E45C02E7D17EB3D9A7027CEEC67304B80D
+:1027C0001FF1E5677AE1BCADC5069604DDACC777BD
+:1027D00031DC8FD569F085E11CB63A77B1AF43693A
+:1027E0009A92D22EA5C1FE1FB7B74B13A05DBE9320
+:1027F000A9F0FC7E29D4C0BC8CFD6B78865F9EC698
+:1028000098DBF9CDAA0CA8B7862B775A006F8BD42A
+:10281000C5B59B62EA6A4AF98D0795C1FA18CF5E81
+:10282000D906EDED6AF54E87C4D7C14632B62B3CCA
+:10283000C7BF09F02892CF4208F77E97398CF8B8C5
+:102840001ACF4BC6F52BB4FEF9ACD56980F58F5184
+:10285000CDE54837D03FC21C97DEFF6E55A5E7F1A6
+:10286000EF5DAC9F61D225F563C68B8C87EDD245B9
+:10287000C6B1484B2D5158FB0E93E01F5976E21F0D
+:10288000ED2676AD1FE0DE6EE5E5699744F3F5BA17
+:10289000AAAE724179958B9F6BBB35A454E1FC6560
+:1028A000062FF20BD6EC7A3D1FE6FBF64B32DBAE81
+:1028B0000EE2E7E3829E0BC7A4F8701EF62F967017
+:1028C00021CCF3D5318FB76540BDF001AFD708FDFE
+:1028D0007730AF0DF12474BB813D04F51F4E2AC83B
+:1028E000580CDD4B27FF382300F8922CD61166AC2C
+:1028F00006F16DD3961BC6F441F9E909CEA7BAC417
+:102900003C7B4DD1263ACFC97686FB666C6732F2A6
+:102910009D4D4E38A4CB18338CE0A5D9A45C8DFD19
+:10292000CC5BCC2C04EB31FFF5328B1FC66B3D9793
+:1029300054837C84B16832F231B335A0A4C3F39DD3
+:102940002103F18556D51E9660DC1DF6F25E15F961
+:10295000A762F016221C3D0682639BFD6B6123F289
+:10296000676953032B80F52A4F5A5CF03CEC312801
+:1029700048E761DF921AAC8702B2B750150C02DB50
+:102980000319E1ED382EEBFFD9046CAF635E84C30D
+:1029900096EC3FF72443BD75B9E235F2DEAA3C85DB
+:1029A000B111F81B4CD96AEADB9C8CEB58C1FBC314
+:1029B0006FDEC54087A949FCFCBED73D57C92F2310
+:1029C000B912EAE37C49BA0084289BBC162FB48F65
+:1029D000B797D7F8A09453CA2D2AECB34D29B7ACBA
+:1029E000A2FD333B83793219E74FAD8AA1262CDA59
+:1029F000BFEE2131F5827B0A9112B5B7D9777523E5
+:102A00003CE4EB1973A9B83E984FE37B000F4BC130
+:102A1000CC5E15F6D17E4306ED4396BC5467D7CB0A
+:102A2000B4EE91AA2DC2C6039F372FEC65C03F4676
+:102A30005A6E5A80F5110DF2EFFB62F8744E405F4A
+:102A4000CFAAD5D73319D42D31F30ABC89875B3C83
+:102A50003C46286D2770FD2302323D8C5FFF3DCA46
+:102A60005DE9950CD769A77566DBAFAB040801CAB1
+:102A7000F93721FEFDBDEB1CAF2CB1B860FEF10EA5
+:102A80000382934D60FD9B71DC1D02DFDB5DFC3C2E
+:102A900007E9CAA8D1A50FE9724CB3818562E48E1B
+:102AA0002B6463A198F90ADA3374F5C29D2375FD8E
+:102AB000C7EECED7B58F0B97E8DA4B0F94EBEA65EC
+:102AC0001DD375FD277456E9EA1323F374FD2B7AA1
+:102AD00097E8EA93A357EBFA5F76F23A5DFBB4BE50
+:102AE0001B75ED33DE5FAFAB7FA5FF165D7F20E387
+:102AF000868E047272BA8BF38536A72FEA4B20CFED
+:102B000007F42E45EE1F380FE09D494EC0EC98F9B2
+:102B100052BC3640A6C13A63A3947793459DE47AAC
+:102B2000ABBA19F139D54CF82CA33C87FAFA9BCDF6
+:102B3000E124C4C3CBBD2AF217AF8BEB336F17F977
+:102B4000BE8AE756996A21B920DB793FD93E87F4DE
+:102B500094D1BB812F55A0D6C806DA93913FB78494
+:102B6000FC6EF7E0BAADCA4E86F45B995AC3FAEC34
+:102B700083EFCB8A8F0552703E95E6B32821EA6732
+:102B800055E1FD987D1D3618981DF97837C809184C
+:102B9000BF23255746FAEBF86B4935952933E620D4
+:102BA000BE4F54D8034F40FF0E89F532D0933A0CF4
+:102BB000EC2CE86CEC497BF99D20AE8135FA8DC890
+:102BC000EFA6B0262A471B980DCBBD52DF0606FDA7
+:102BD0003C4D27AA72A0DF0977600DEEFBBBA04336
+:102BE000E0BEBE3B9EEB595BB2E7A9A897B5BB3AE6
+:102BF0007AF3713D592057901064BF17F50A6DBFE5
+:102C0000778AF394F3DBFB50FEAD4FB7A8A82FC92A
+:102C1000969DFEDF03BCEE37F53DD20AF5364959E5
+:102C2000DB817CF166BBF72186FA23879B9A62A839
+:102C3000D80CE3766CF2C9E9D0DEB18D79DB903E39
+:102C40001C959BD3E179E1A855860CA407F7A6CD86
+:102C5000586E413D16E61BE7D96BC884F6D24995FC
+:102C6000B50C65AF02F3650E8F4FC6D4DD0CF7C30C
+:102C7000DCF2BB8857A8755F80A55766C079C3BCD6
+:102C8000563C6F894A8283F59C3D6CC5BA9BC3C58F
+:102C9000EA93C2C95077B87D92CF83EFEDA6F3B522
+:102CA00046F47AEC1A77E04E84A76381FE5C65CB2C
+:102CB0005DB4BE1D064E17EDE9EA7194CFED2E7797
+:102CC00046AB3AB84E8DAFDC2FE4A7F65CE32B0A97
+:102CD000DA145983FA0DE0F96E4301EA673B19F201
+:102CE00027EBAD3B19E2B55509A90CF5F07F0B11A7
+:102CF0009E6BFAED064133D5F9B51694D7671DE5FD
+:102D0000A4CF5A9BF7D379C5C3CDDA6760BE8BC019
+:102D100035B5E85E92EFC080D542804F4FB6BD61B9
+:102D20006F02BD7FAAB01BB6011947495EF92DC8D5
+:102D3000AF4DC2CE004C30A07C3BAB30925FACC3F9
+:102D400045F50DE9BCAE8DB321AB3CE762FAB77532
+:102D5000B7850562F6B10DE641B86C39BFB806E13A
+:102D6000CA64220EB6E3AF9EBDDB1196C2AE992AAD
+:102D7000E03D1BE706B88E3633B20BBC8E053548F6
+:102D800077FE73F9247CFFE4CAA07EDE103336D1CF
+:102D9000BA4D9A5C325C98406B55CD9A1C26D596FC
+:102DA000CB2DF8BFFB82847C3F468EF182E4BA26AD
+:102DB000B70B77EADBC7EED6D7C78587BCFF06CA55
+:102DC000FDE5FC77900BFAF67B85FC5E8EF21B4AE4
+:102DD000B6CC4472CF022BBAC0E5EEA01C04BE9064
+:102DE000D711A944363A6A638C3C64B40F9D7C5C6D
+:102DF000E3E67CCCDF2B9BF01CFDE7C0F8A818CAEB
+:102E00009747277178F79853C29BE1BDDBC12E0A23
+:102E10001471FB3900A4F65DD9FBCB3AB4B37A8DBB
+:102E20005EC0D881738A3FD715F91C7F7A5DFEBFDB
+:102E3000BA487FE8AB40BB1AE70BC4CCD7634B1D45
+:102E4000CFC06E79B92860CC877E1FD73826217F06
+:102E5000481AC54C489F383F2B1AB4DFAF12F4B460
+:102E6000C3FB5AD31158C76D2793501D67B38DC745
+:102E70007B5BA0BE3E4F267EA65CB6F60768275752
+:102E8000FD1ADAE19DDB543587F4F45E13D9EB5576
+:102E9000028FAB84FD75B4D044E3E68A75E78812EF
+:102EA000DEB071FB3B62437DB6F400F062FD792633
+:102EB000F3761FE9BB651DF1ED3E86745C22F005DB
+:102EC000EAF64AA84F14F50E26652A708E136AFB9F
+:102ED0007AD094F0BC78D4867878D0CAF5B7470514
+:102EE0003E6433C91B81F5671FB07BC3D02FC5C8B3
+:102EF0000E46611FDE17E47762CF7D7C97BEEE61E0
+:102F0000317517AE435FBF5D6D92102EB7D7818EBE
+:102F10000E5BAEC84F71BC5BCA10E645885FB38DCF
+:102F2000F689684FADAFB433846BD2A9B1FF2B8A59
+:102F3000FCE38491A15C5092D53BAAE17DE56799C1
+:102F4000DE4DEAE0F93FDA82AC1BF8DE052F6B03B9
+:102F50009EFCDD2A5B03EABF8FC179A21CF911D860
+:102F6000D9D8DE01E78AF527C1CEC6F210D8D9F844
+:102F7000FC69B0B3B1DE097636963F013B1B9F7703
+:102F8000819D8DF5AB8A2ABF8AF8526FF7CF9610D4
+:102F9000AE3E595580AEA44138931F48627DD2059C
+:102FA00020903A85F525015CCF8DE17490841E2632
+:102FB000E0C32CE0B5205E7EFE383E6D9C8029D1BA
+:102FC0003853611CB2132C0AFA45F2E18D3478FEB5
+:102FD000E1CDBFDA8FF262A11458910FFDD74D7E7B
+:102FE000C7CCF5E77E33F6DF6305FC073E344AD0F5
+:102FF00041A80AE08972F725A3B7157A5D3EEBD4A4
+:10300000862CB0BF6FDA377931DAEF97DF74AA62B6
+:1030100034D40FEE0B2F964119BFFCE1534FE5025C
+:103020000FCE796015AFDF79EAEC28684F0BED58C9
+:103030005C3D0DFD525C3EED91586DAC7ED72CF0A1
+:103040003BD8BC8BE41CF077867068CDF6937C3C53
+:10305000EDE84F5D05FD8359FDD9D75D847F079B62
+:10306000EF2639D49AFA07D23F5A07E48597E485C8
+:1030700036AF262F3E16B8A7C98BF5565E1DE8174A
+:1030800028A0E7770ABF0E0B17523DD3CAEBFF5EAD
+:10309000A5BE8A760FC087ECDC23A925DF9B897645
+:1030A000658DEC4D82FA9DF6722BCA9B07F3B9DD54
+:1030B00002E386D08E0FCDB6841FC24375A8448F1D
+:1030C00019DAF80E372A5D2C43ACE385E9B608DA45
+:1030D000F9ADD5967DA84FEEB2E7D378AD53CD21AB
+:1030E000F4AF68F5CDD3A75B509F484FCD70615DBD
+:1030F000E34FDB01EFB1841F238E5B25B65B65B127
+:10310000478CC8CF2DA63FC5EAC9761625FCF11A13
+:10311000C020413E50C0F1AA82796BF1B9596A0AC8
+:103120002132EEC1B5E33E52849F92E5F2756BFB0E
+:10313000F0E5F27D69FB483187C43E484FDA6537D8
+:103140004450DFDB05FBC2F176E7AB049FF87D312D
+:1031500074BDC2B8B3A68A752B330FE13A661B7CE7
+:103160006DF8DED1CFEA1C805E6C0E6B92F17901B6
+:1031700058B4E89705946EBB7011BD23DE2F7BF920
+:10318000EF24DA0FBBC94CE7F24C215FCFBDE6B0AC
+:103190008B91811B1EB1246578FC7D6308FEFA18B3
+:1031A000D2536B868FE3AFD29FBA09F137BD3F7B15
+:1031B00033ED2B92F03CE2F138FE7C7E0BFF841C59
+:1031C00030227C3FEF3CB573D4F0205E7E4D28501A
+:1031D000B4F375D23E7DC59C0E343D8A819D9332F9
+:1031E000147E5B613CB568B06E76FA493F3639BCF7
+:1031F000C5E8BF6DFD9BB12191FF36AD80D3C1A65F
+:10320000541BE9CDADA95C6FEE4E9DA7B377AAC163
+:10321000FE91003F8C99AC03E9C8987635F9BF8CD4
+:1032200039A821E1BAE2F4D1B4055C1F55401F4D25
+:1032300030AF56CAA88F26D05307F4D18C795C1FC3
+:103240004D35933EBA27C55CBB3701BF792F9FEB45
+:103250007BDDB88F04F61ED879E487D4EC3CB3123A
+:10326000207B4DDBE77BF99CAEB4FE494A1343BF9C
+:1032700098D1EC5551DF34DAB8FE9804DB2C8E91EE
+:10328000DFDAFCEFE49B088E3D45FCFC0C16AE9F9C
+:103290005CFEAAD49408EE6A81A63F24C6BBBF0395
+:1032A0006F882F94DBCD3ED40FCAEDCE2AD40F8683
+:1032B0007B0F4CCDD0FB19837CC5FBB72946923FD1
+:1032C000B2D78978D661EA7BEA55B4E38EDA49DE73
+:1032D00074A48CAA8AD59FC15E0D15C32007FF0276
+:1032E0009468186AA782FD34BD00C6ED599F3D89D8
+:1032F0008F0B7A5ED950BD32DE1F3040EFA9FB5DE7
+:10330000FCBDF0087C4F5A3F3507F12A9EDEB532EE
+:10331000CFF952DE6A5857DE885E2AB5E7FF9B195F
+:10332000C9BF16DF7FF1C03970B93C0E264B33920E
+:103330003C5E8CEBFE70E36BD95E584AA37C86E45E
+:10334000F2C74D53D36E5339BF3D8072E69B32F1C5
+:10335000DB516BBAD33362CEF9DE96CE3CD98D7198
+:1033600083685EB59BEC015FA2F5FEABA03F16192A
+:1033700043FCD924F0407544E78E05B8AB7683173B
+:103380005DD2207C757CA0524EAF5660FEBC16E626
+:10339000B543DDC514F267E55D3012BEE51D594148
+:1033A000783CC6D12F853C31F3202B8E898B7CD283
+:1033B000544DF499973360C751FCE013476431D200
+:1033C000F72777F115E53DA06F07194BFEE61B3691
+:1033D000DAC2680A8EB95531603DEF07121BE5C2AB
+:1033E000751C71DD86FE9A6792C95F63DCED267FEE
+:1033F000CB0FA4C0F505B08E0FC3EAB7D1CEA51F81
+:10340000E8B7EE3BB67DDB498E45E7921CFB968123
+:103410003D94C09FD456C0FDE35B04BEE7395FC94D
+:103420005B5D81E5713AEF4BA5A783C8B7619CDB73
+:10343000D27652BC2B54C58AD1FE6B37015E25A0D3
+:10344000D73305226EA6F163013F2B5A2BB00FA391
+:1034500024F4BC038F3EFA6836CA6D864ADE00DD6E
+:1034600069E32417775063B2D7C7D0EF20293ECE47
+:103470006795903384F19DBF1A13E27544E3D3AE90
+:10348000AD4EEC5FEDF63A910EBA5D539CD701FC60
+:10349000EC76334B8AE1C31A9EBC903285F4106DF2
+:1034A0009CF529F917B5B7CDC08FD58BC86933FA0C
+:1034B000BD519FE999665161BD5BEDE551D4B7B649
+:1034C000DA1DE5E43FB703DF88F127D9EDC7080F20
+:1034D000ED5EEE67B323FF457F92D87FB7EB18ED23
+:1034E0005FEBB7A780D3BDDD1BE1F147B066B09FAE
+:1034F00055F687D0CEB03A18D995560BA7A76438A1
+:103500000E4B0C1FD1E6FD7E01B7D7B68E2A8F5623
+:10351000D2FA64F408B0ADCE7227C9438433EAA36B
+:103520002306F451F29BBC2EF881364E6B37DFA791
+:10353000BFD9E9ABCE443BD4FF22F285ADF6EB2CEC
+:1035400021940B29932E3ADEDBE2DC868ED73C4BAE
+:103550008CF73AD28331A55CC1F14CC82712E0DF69
+:103560001FC4BABEAC5F0C20AA90DDC6B87E051899
+:10357000EF4CA44768A545F8B786BEC7F9A44BD859
+:103580002FC0273FC5F5AF1BF5CEB14AEAC5ED9672
+:103590008CB972B10CE7F5319CA0511AB4E3E3F594
+:1035A000994A633FC9354D1E69F2E95ED467CC8301
+:1035B000F4A4F95F721BFC24B725879FF006F41B67
+:1035C00015E9C68871DF04709BEEE6709352A7AAD6
+:1035D000482FD5E7FB72F1BDC329EFE7B2183F9A38
+:1035E000C60F5FF86CBF15DB3F69A8BAA8DEA2C59D
+:1035F00085878B07A7DEF2876FC6EA2DC3C5873F95
+:103600002F2EDC936A26FFDBFD929E2F4D72733EB8
+:1036100038C1ADC50F0363DD59D8CFEF25BD51F8D3
+:1036200053DE2E0A94B8D1FFD56E662138CFC39FE2
+:103630004D71227E5C2A7C35FFF948A14F8DB4EF95
+:1036400097904E47368425F47FE7367448BE8BF456
+:10365000330ABF92D6DF24C6BF42EE37A2BCBA42BD
+:10366000D071EE399915C7E8817F2BE0FA9449E8CB
+:10367000EFA93D8F5871BC1E83BFBD08E543AA4129
+:103680007D2886DE4D6BCA2D5531F069C5B84E8256
+:10369000F3AB730FE85D641F69F2D6A4C90987AC68
+:1036A0009313C1648EB79ABE139CCEED21490A2CA8
+:1036B00047B89E9EFE8745C8B24E4B1D668C7F7FE5
+:1036C0005E5C6340AF31845769760CD28B57567E6F
+:1036D000DA07EF4F7CB892E861320B507919E37A40
+:1036E0001FE8515FC7F92A70C931E7CBD0F590FDCB
+:1036F000F9FBB812FDDE59E89F8B92FFF4BBE7257A
+:10370000E2E3F1F0D93F009F81F89DCE0F9A2BE4C0
+:103710005AAE6857D10FEAC27894DE4F59D1ABAF99
+:103720004F8EEAEB979D8CF37B867C3F7767F3782F
+:103730003F0EBA07E80AF9C16A11A71C150A572AF1
+:10374000B0DE3CD641F1C0DC860C1D5C2F378A3CD4
+:1037500009E69398B64EF8C995177E80EFDFE7D655
+:10376000F49F10E9593788F66F54AFFE761BDACE16
+:103770003B4DE40FB5C0E408AF6FCC5D321BCF7595
+:10378000883FB549EF47CD8D6D0738DCB0C7A46BD6
+:10379000F7FB26921DB054F86907F68BEBC8E2FBE5
+:1037A000CD2D1F3AFFE7CF0BFF3286CEAF8D7B2F9B
+:1037B000F01BE4A3EC3C9CEB14841B438F03CB93E2
+:1037C0002312C6A54736311FEAC3B91B992F917F33
+:1037D000FF6501AF7838B3D01504BF59E2D948BBB3
+:1037E00091ECF4911B0DA4078E047E807C60D15A6D
+:1037F0002017A8E7AE55498FBCB2C1C0500EB0F338
+:103800002DBAF761B9E4EFD4CEFD5E1C0FF5C87593
+:103810002C6CC0FD3495103DD1BAF207F101E0F5F2
+:103820000E879785E3F75493CEAF99877ECC18B86F
+:103830006878901BF7BCD1CDE32E1A5D803C7BD914
+:103840004D78C2E55C21CA3958D287D34EEEEF805D
+:10385000F55DBE99D17EFBD36D619EFF30102F3098
+:103860005E180BFCC932AB18FD2A3B149B01F31404
+:103870000EA7F7DDC7D219FB2DA8BFD533197BDE04
+:10388000D65F2A41FD8F0FFECBAE763894C3D6FEAD
+:103890001FA2B3D77EFBE6253531F5D47FBF9BEA67
+:1038A0006C2A5365808F0D67807DDA9479078C30A0
+:1038B000BFCD632727A48D0DD029EDA76DBA7A3B24
+:1038C000E679B4151A484F62B1EDB08FDA4245D0AF
+:1038D000B78FF2D8580D8FDBC78E2F3B2E32FE3CB0
+:1038E000187FD21718DFC2D79F8D8F40BE64E3FACE
+:1038F000D14F8DE3E3F9A2B328767E319ECC427B93
+:1039000031BE02F3D9253E9F827924D94C9F3730AE
+:10391000309F02F395FD03F6533BF43C4C173B8F6D
+:10392000ABBFD879B4197CB4DED0783BD93F0C9AC0
+:103930000D53D0CEE0F35965F6825CCEE1DA366500
+:1039400010AEA0EFD1B8D07DD305016713C25931B5
+:10395000139C87835B8FC2F398B629B6F026D7FFF6
+:1039600085F372F2F38A9D0FF5C64B9EEF6A98CFEE
+:1039700071E9F3217C917E06E00B67B239FBD2E15D
+:103980000BAB0A5D0A7C7B605C430C5C07F385EE45
+:103990005150FFB79AFC162FF0DFEB0B791EA2C730
+:1039A000B1C442F903594B2C9897B7C563AFC1FC1A
+:1039B000BD2DEE6516538C9CDEE2A9A376E84F7907
+:1039C0004E9E880DDD13AC8C45C9FEDF36B3DAB9E7
+:1039D0000AF1A789E74D6979449A3C64223E49FB84
+:1039E0008217D3BE72A8BF07FA6F6B9A44796269D7
+:1039F000E97FA6FCA81D0D5E2FB6DF67E571C6BB8B
+:103A0000459C091195FC68E3A73F80F1D6F2C2F509
+:103A100012C517D75E3CBE587E265A8579566C155E
+:103A2000CFA372D6C971F2504FB73B10AE3CDF291D
+:103A30002C71F8EAC6BBAF308BC79FDDFB18DA7775
+:103A40004FC158463D7D1930EF289E1E65B34FA9E2
+:103A500044BD7CBD81D6918BA17C1071E5650B9C2A
+:103A6000ABE0F9A8EB65AF04CF733CB752FE116829
+:103A7000F5A46F783CC7ABB03E649FABF5FB88DF25
+:103A800057FCBA417091BCD1CEABFC8C3719EDA874
+:103A9000F2C225941F463F1ABD1BE3F69389F6AF89
+:103AA000C16705396673C7EC8BE9FA093BED7FB650
+:103AB000BE0D9109E5627CFCEBDFFCB4CE24E6B5DB
+:103AC00098E9BD3AB217B5B8DA48A41D3CF7D18CD5
+:103AD000C725E2DF9FC2DF674E1E674BB281E9094F
+:103AE000F427DD6823FF655212D4E17C2433B38CC4
+:103AF00080E7F70ABFDF2689C9581F9C2FC270BE16
+:103B000056C9BFD3EBC292DB4BA6743FE517629850
+:103B100036D6EEECC1BC0D685FBFC695837EBB3464
+:103B2000208828DACD222EA5F949520BFA56A2FC9C
+:103B30007EFDA1BF2CB1A07C46C7D274D0BE0B3F86
+:103B4000DD159A39489749E7463235C67E49929B3A
+:103B5000287F23E9DC689D3F2522EC2EADEE73C85B
+:103B6000D538DF7FA15D00F85CC994367CAF128048
+:103B7000A2C6FA47CF3975E30C8E3F4A376F04EC83
+:103B8000E7D838C0F0E32733B53876FCFC61C62FA0
+:103B90008A1B5F4938FEE0B899BA71B7C89C5F8448
+:103BA0001CB670227F5E5651D57924E5E1F2CB1C1C
+:103BB00045DCCE057E2C53DC49E0CD6DCE26CA37E0
+:103BC00033DA787CD424E22547521A785EC4287D03
+:103BD000BE591553646CDF923AA75782F62ABB5E32
+:103BE0004FBFE2FC3B46E43B57C87A3DDDC79A082D
+:103BF0003F2F67FAE7A6517A3E7010E903FDFE29D0
+:103C000093A294979665A73C83E1FC076FB530CAF1
+:103C1000973225FB9B50C695ED4FCBDCE2847A1A98
+:103C2000C7AF19FBDD4BD11FF496C0E32D40F70859
+:103C3000C7BAF5397B8D31E3D69923852847EA0C3D
+:103C40003C3F9F7E60FEB7B246923F357E5ECAF033
+:103C50008DF147D537497E77CC3EDE12743130DFA7
+:103C600086DCBDA8C70ECC9714994CF30DE4F988F7
+:103C7000F9B2BFDC7C6F0B7AD6E6ABFFB67E7FF580
+:103C8000E628EDAFDEC0445E3F9FEF6DDC9FEB4B5F
+:103C9000CC27F2B506E6FB8E7E7FF54951DA5FFD53
+:103CA000803D29E6CBFE72F325999B281E7387C4BD
+:103CB000CF754351D99DE88F3FBB60BD8AF8A6D927
+:103CC000678BF005C0B345229FE9CA5166D21BB489
+:103CD000710FB44C653E33F7DB60593C53A2FCFED8
+:103CE0007153251FC6C3F600DDFB8AD02FA5507B7C
+:103CF000B8C549E5BE1695CA07C11EF4917FCACB67
+:103D0000EB45DCCEBF6384B26235EA0B95369EDFAD
+:103D10003C730668A283F61618603D56CC23FC1A45
+:103D20009BB81D6A45BB393C1CD5D9613C27DBC417
+:103D300017A22D504F9A6654316F3BC9C5FC89FCC0
+:103D40002E3F28E2FED8DBB47CF8AF483CDE0EFA0A
+:103D50004825ECFF5A016A665C20A15E75E577D2C2
+:103D6000491FA95BD697A2C03AAE9126FEDC0DF0A2
+:103D7000F8ADD047AE1DCDE938DE9E74A0649984BD
+:103D8000F97AC670187E5D9AB294ECD1A5CB19CBA6
+:103D900080F7AFC4F740AEBC2AF49957FA9218DA0C
+:103DA0006BA16A1E67BEE656BD1D798735A2A01EAF
+:103DB00077C74407C3F3A8DBA86FBF4DC40B96C6F3
+:103DC000D99557C6E5D180964978823C814D83F3D9
+:103DD0002A4A71507EABC8A3B9BA48E57C6E948379
+:103DE00092A833E6BAD330FE98644E7CEF461BEFC0
+:103DF000A8E03BCCE12338687967CCF8D8447A5FF7
+:103E0000CCA7BD77AFF4D8888BF935416F7BB7AFBE
+:103E100098CB67D4AF0FC6ADF3EC82FCEF55B3443B
+:103E200078DB2FA35F415BFFFF297CBD097D1AB0C2
+:103E3000EF57677D3289E22D6C14ED7B91863F222E
+:103E40009F6AE9405D66724C3E1D73F67BF0BCDFF5
+:103E5000F84AB2773BE19FD01F226F1A2E247FF1E0
+:103E6000F106D6E1F4E5717F5CB542F94062BCE150
+:103E7000E01C9FEFA0F96DE82726DFB0752FCF7704
+:103E80001CE9A8FA00EF45E1F3777478A5BFFFD4E9
+:103E9000DAFD8884F6C57D789F4B1E9C0FFDB4210A
+:103EA000D25FF5F7B2E2D7A5DDB7D1D6D36A66C542
+:103EB000648F1A803FC07C0BED7DB2A4A2DFBD5F92
+:103EC00046FC2A19CBFD449813CCEFB9703DCF982E
+:103ED0006BE0F91B6354AEF7B9FB47C7C685D2C682
+:103EE000F278DAC2E4D736AA20FF4C0F6F5E8AF967
+:103EF0004B0BD35EDBE882BAE5E1565ECF7DED1376
+:103F000017E86CB687DB78BDF4B54FF2A16E7F7809
+:103F1000CB52CC675A38831150521FDE4AF2326DB1
+:103F2000AC664F4747E17C0B254E1F5FB634261920
+:103F300012C6EF9D63353F2933E13CFEAEFF388961
+:103F4000FCC8AFF95F7DFA7823C3A66CBC27247E3A
+:103F50001CA9A4CFCCC3DF019EF3E54837BE6FB0E8
+:103F60004408AE63316FA69850E0AE0B17C98F8836
+:103F7000C72309D0B519F565556175A01FB736B3CC
+:103F800080B52006CF994FE039CFE3D1D6A3CD3FFE
+:103F9000645D70A47246ECBAF6D038DABA4E4F4C73
+:103FA0000AE17D322D7EAAADEBB4D47F3F3A23BE29
+:103FB000F9C3CEE5786EA753FA474B503FF1F0FBBB
+:103FC000748EA7B3FAEF97BC3175133FC7CB1FFEB2
+:103FD000C152948F1B25DFE563317FCE6CA77B6BCD
+:103FE000ED42CFDB91150831AEDF53BE63288FDF82
+:103FF00007A89E24F962E3FB3502BFFE632CD71F9E
+:104000006727ED6C3A01F8183C24B14DD03F78FE9B
+:10401000AC19EDF1855DA7CC6877371E3A6546BBD4
+:10402000BA11EB304EE31E33F1AB78781F1F6BD41F
+:10403000C5D1357BE2685ED11607ACA771B5E4C582
+:1040400014D9F5CFA6CFC6FAFA55B84BE0EF330F27
+:10405000CE4674A9F7776FC1F25AD67714E3052BD1
+:10406000027A3D7F65835E2FAF6FD2EBD3D7EE84AC
+:10407000D301F9756D73AEEE3D861A32AC678538A3
+:10408000CF15CEDBA3C6F1588FB987231159937F83
+:104090006725DF01947ABFC5C22E89E8B8B1D64240
+:1040A000FED7A3793C7F3EB8D6487941414407AC5E
+:1040B0003749C29FE523FEA8C9EFD99D678EE5E287
+:1040C000FB6B4D040716F245D1AF5F2BF0E9DADA4E
+:1040D0009A0F10CF6AD51BB91C1FB3DF44FE9500A1
+:1040E000D7C755E1FFAEEBBCA33A03F5CF8D12F96C
+:1040F000375636E8F5F57AFC05F5B766291C7121C7
+:104100009CF4EDD736EBEBDBC70A3956CA4A914E21
+:10411000BE375692896E44FD4F79BF78250213DD74
+:1041200022F97721DEAD3547C6A35CBB450A505D59
+:104130006B87E78D5CEE70796F008A22BE6BE27E42
+:1041400085D03A89F071E510F91FA31F1887D68F23
+:104150000A7ED26AF56F247BE93949417DA45AF67B
+:10416000C9199E417B361E1F8F093C7F85F57970EA
+:104170005D450874807FD1D2B430FAC38A9E5F4512
+:10418000F98D451592D740F46C60CDE558CAC41F2F
+:1041900050DFB4425964ECA8257E3DC1ACF0FC412F
+:1041A000278BE503BE479884797CB8749C77FEA87A
+:1041B000DECFF01C17EDBEFD0CF23B7781AFFC0E9D
+:1041C00058DF0E2B9F7FC7B312E9AF8D9E63C417D4
+:1041D00073004D70DE46A7E08F9DC01FB5FDC3790B
+:1041E000E720BFC20B210B3C34EF082D3EA0E5D7E2
+:1041F00046AA0C1780EFE488798F97A9B4EFEC1BDF
+:104200003B24DC771E0B6D423FD18FC7327AAE95CF
+:104210009A1F7FF960BCBA06CF739DB3CF4CFAB733
+:10422000885727E8B764ECE404FD7C4CE747986DB9
+:104230003C9F8A71E5F5CF155C34AFC26831E8E880
+:10424000D5A4D874743DBF584FE70BBD7AFABE723F
+:104250006A81AE7DB1AF54D7BEB4A642575FEE9F20
+:10426000A1EB7F55ED2CBDBDEF9CA7EB6F5597E8FB
+:10427000EAC9C557EBFAA778AFD3F31B4707E50F99
+:10428000982DA1BE808AF7E6199B9A31C8AF4B538F
+:10429000A13394B60AAB1DCBF68949113CB7F69110
+:1042A0003C9E9AF4E2B79C11847ADA63964A287F9E
+:1042B0002885AB305E6411765EC9AD4CC7CF1795CB
+:1042C000723CD74A5371401907E7E339A0E6F27C04
+:1042D000E968099E8F051D8888C74F5B48EF9810D5
+:1042E000A7FFBE5256692B467FEBADBEB9E497EAF5
+:1042F000640ADE97DD67E6F94CA1A779FEACA7B3A7
+:10430000CFE08BA1B7BB8B397D7EDF5F45F9498D4F
+:104310005D20CD10BF77BF6346BF5D6357772ACA64
+:104320008DF1FE77CCA85F0F3E17F244EEB761FC2B
+:10433000F2898EC47968738ACD34FE31C16FEBBFC8
+:10434000C5F92D20DC02B48F34FE597F90EFAF7E8B
+:10435000B999E85BE3A3C03F75F1B078BEBC726663
+:10436000780BD22EF0519DFD72EDB2391FA03DC4E5
+:104370005884F418E0A3FAF6515B89BEAF8DB36F91
+:1043800026150FF053CF05A097937E43C27D2D2DA8
+:1043900095695F2703B308DEDF07B8A1DDF8FD21CB
+:1043A00070E2F0FB3CF83C2EFC89DA39C5F7AB2D06
+:1043B000E5FAE8E3C3F0CB3DE21CF749D17264664D
+:1043C00041BF8DF074A5C5B21CF30C8EE57DBA1506
+:1043D000E309F53F96D09665BFEE7E311BF30ECC18
+:1043E000078F66633E44B0E368360338AD35A99B5A
+:1043F000502F063CF06E827369EC8CD0FAD775545E
+:1044000074E3F3759D92175961F0D09939B44FD682
+:10441000B715F5F87DC3ACEBBA62AEA7AC2B56A9C5
+:104420000C06604E94B38792C88EAD3F087C08D7C7
+:10443000F5AC44F730F66DB3D426D24FEA4BF9F71A
+:10444000185ED866661847590BEFE33E8EE51D33BC
+:104450005B106F0E4A6413063B4E2C477F7C70A3A3
+:104460008961DC565BDF8779D1DFE0FEDF5C6D625E
+:10447000786FB075358FC7BEB9D148E318AF3751E3
+:104480007DC51A9E277C64F5EFB6E6C2B86FAE957F
+:1044900028BF7ED6F5FF790CEB2BD6703D281E7F0A
+:1044A00007F0350E3F5704F47837044F1BBE1C9EAF
+:1044B0006E1BC4D3F12867E1DC67E720FEDCCCE8A3
+:1044C000DE62EDF923A61C586FFE56C58BA1DD32C6
+:1044D00063784B36F28523BC7DE2DABD12E72F2AE2
+:1044E000DD67CF6D3733CA532CE67C680F9E5716B5
+:1044F0006EAD5FC2BC362647F3717D2E91C7F5A421
+:1045000089D51E443F92CCF94BD933CEBDB17EA4A0
+:10451000F9021F35BE570AF6FE41F243778CC47B81
+:10452000E68F9BB87F6CB418AFB0A07FCE6228BB7B
+:1045300004BEEC17EBD0EADF10F8CF3AF6911C5D21
+:1045400068E1709FD71CA9C37DDC20071E43FEB71E
+:1045500060F42FD6A25C6BCF7FC913203F5709C9E7
+:10456000B5A0388F23D3DEDBB301F3EDC6D9E81C49
+:1045700017F7DC13C5736D74CB9467682D9C941387
+:10458000B8881F21784ED5DDDB6BEC3A33C79780B6
+:10459000AEAF13EB2D13F7F35817F71F003F96A795
+:1045A000960FF6D3F6AFF93DAC850FD2396DF826EC
+:1045B0009BC8EFEDDF417058B9F68484F752AE32F4
+:1045C000F94C7680F32FD2D872B4835F6A61744F4E
+:1045D000ED38DE570356F24A8B42F5A8B8B7F65AC3
+:1045E0008B4AE55566FFAB089FE52F341522BC8E3C
+:1045F000E4DDEDC7EF309C3E2EF459A6F07B8C0233
+:10460000F7CE76199905DACF1E92C2E43411EBBFCA
+:10461000E6DC4816007EF22B713F6E5DF3EBC4E7DB
+:10462000BC0D67E6A09D3171EDA9AD580F36FFE7CF
+:104630001CD41B7E037202F12BD82931278C5377AF
+:104640002E83DE5FD779C28CF6FCE386FE3908FF45
+:10465000D06189EE55059BCE10FFDC23FC2B69E36E
+:10466000781C31D835D140E7E92BE1F68938FFEEE7
+:10467000923FA722FFB234ABAFCEC073EC35D23934
+:104680006EAFEA4F55129CCB491817F3477E25F2BF
+:10469000F186F0597388FCB2B5026FE3DB93C7195A
+:1046A000343BDC24F2949804EBA913F8558FDF8394
+:1046B000C9403D5F8AD8806EEBBB66917FA3BEE99F
+:1046C000E2DF77190EDF2EB56C64DCBFA1D5D1FE19
+:1046D0008ACDD742FB4B7F0F3DC4EF71E5B9730222
+:1046E00017D1EF827D23297ED2D8CE285EB2EE5C30
+:1046F00009951F3D7B1BDD7BB2D8FAEF46B9C08A16
+:104700000CA4D7AF0BE9F59B4F4B381D7C5AC2E97F
+:10471000B8601CD8271636609F801D5284FA0ED8C8
+:1047200021A93D4C679FC43F27FBC422FC86A02ED5
+:10473000059E4CB0EEBF9454958ECB42BADA49F840
+:10474000CD00BF11AFE2F739651C5F9746CF2B7ADA
+:104750003E30A3BE1BEC4C4CCFE6D2CA2938EEB695
+:1047600061F2EFCE8B7DAEDBCD085EC1DD1904A713
+:104770000FD96E7F15E0E587B00EBC977EDAEF4F5C
+:104780004E87F74F07FCC9189FD3E8BF71B78DDE7E
+:10479000DBE65E9289DFD1982FF0FEA3CE59168416
+:1047A000F335BB39DD69F3FD26B22213E967B2A9FF
+:1047B000DF8CFEC9515DA75251AF9BFCECD24CA4DB
+:1047C000BFE1D639A384F3E575CD2397D3BD1FF898
+:1047D0003102DDDF24E4587073C48CF0BFA9991155
+:1047E000FE763FFDEB46A4DF8FBA921594931F3EF1
+:1047F000971C427E7FFA7052D80043AD15DF3FFA16
+:10480000D0D4B788F4C7678D94AF103CFCC7BB9178
+:104810001E834F27D13D9A9BBA6E3B83726E6DD734
+:10482000DC0F642C1FFBC7D2C3BAE6D1CB63F38B7A
+:10483000FFD8726024F2CF8F64CE276EEA7C8AF4B0
+:10484000D99BCE9F1D8FF9831F3EF79729C8CF8232
+:10485000CF9F9D827C2CF8D3B353B03DF84C72535C
+:1048600022FD646D29F79F68F2D1F586ACF3B3643D
+:104870000B79E06ADB5983DF29987C6219C501B4A2
+:10488000F6C985063FF69FFCF3EACCEB63DE6B8B43
+:10489000CA942F31E94475F2EA18BC4C2E35697E72
+:1048A000BA4BF38F883C04CD3FB22D2AF37B750DB4
+:1048B000C630E6F1AE8CF2F87BBCDF8431FFFC320F
+:1048C0003CEF35595EFC3E0FDE4BC7B8C8E99B0B89
+:1048D000C3742F3D6439EA8ED18356440D9124F47C
+:1048E00083742545501F5A11954F25C5F8457EA361
+:1048F0003CB905D5F81501BD1F23DE0F023F297213
+:104900004CFCA47E63C4A4C9A98530FF2FB6300532
+:10491000E33643FC23B55F253F4CBC9F448DDE65E9
+:10492000C1F75437FF9E8EA667E2791D4A40EF1506
+:10493000829E353A6A8B1AE81CDAA2551637941E05
+:10494000414787406C86302FA86BE94368A7B79D25
+:10495000BF2A19E1D5F6C61286DF8B38AD54590A45
+:10496000F1BDF35FB52CF70CE2C710FE318EF3C733
+:10497000017D601839F7A1E05BFF2879F7C13F8915
+:10498000BC03BBBA1FF937D8D52BB9DF83DBD5F110
+:104990007242E3BFDAB8AA38E7A1FCF703D25FC0DE
+:1049A000FE25FEAB96A8D46F54D7E24CB28BDF58ED
+:1049B00096A9DA878E5F207B0D199EA1E36BFA5AC8
+:1049C00030E43B6A413BC6C7F34F83CB24FA6E54B5
+:1049D000D02F919E1DAC3385B15D5B4F74198F0B49
+:1049E0002EF74AF41D104DFFD3F4C381F649D0EEE3
+:1049F0001AD41735BD30EAE77ED1653E13B55F6541
+:104A00000EE4944CC6FD59E9F9E4697C5CE0034787
+:104A1000D1FF79D5D724FA4E97A62F6AF819AF4F50
+:104A20007EDC5570D1EFCFED1178A9D1D7E838BA37
+:104A3000D0E4D47C81EF8D28A733514E7F66EEB34E
+:104A40000FAF77839C2E2DA1F718BD3FE9E7B23F4A
+:104A500091DD7D588C3B433BB7E80B95B8DE3C16A7
+:104A6000A5BCA8E1E467AEF0D30CD73EFF12E9F88D
+:104A700086927F2C1D5F57F2CF41C703FA9F39F111
+:104A80003EFF52527913E2AFCDD844F7A3D8CF4CB2
+:104A9000E4B78EEFA76AF6A4CC74787C34CF6C4070
+:104AA000BB27D8C0EDFEF674F555B24F5EE4F7EEC5
+:104AB0006F12F94A379E53A86CC70F8361FBB75C2E
+:104AC000E4B7B9F1C009930FDE5FB9519A88FEA02F
+:104AD000950DFAFDB467F9E6C6FAC1DB4774505C80
+:104AE00021F450818AE3D7E366D11FD23E328CB1E4
+:104AF000C746F4E34CC0E731F72D609E75E2F90C30
+:104B0000E1DF61717AC04FBBDF247F0FC685907EE5
+:104B1000CD5D12E585047BB9BFA3B18BF385F71B8F
+:104B200024E227EF8BFC8C60B395FCDB9A1EF181AD
+:104B3000E8B7E66689F4BD217A854F1F7759F7E01B
+:104B4000CF892FC6EB111987F838186F41BFCCD128
+:104B5000BC2912D6D7815D88DF250DAAEA95B97CDC
+:104B60007D2C4CFCC5A7F3A37CDCFB3BB223573E5A
+:104B70002BB14CD23BE2E22FEDF3E2E22FC78EE6FF
+:104B8000E23842CF50E03FF41FC6EB198D9D274C11
+:104B900068177C5E9CE59912BD5F708CCCFDAC63A0
+:104BA000BA2405FD4963049C2EDB662338CD797B4E
+:104BB0007526D2B9763E1F2DE6E7F5D19B9F54E2CC
+:104BC0007B53DE9615E4B73F7D73E3EBB9BCAE5A79
+:104BD000547C6F6332DA211FBDBD3E19E1F85328C2
+:104BE000F1FB48CF9C9413FA0F0B4B39BF01F976B8
+:104BF000BC84FCBFC26F2C837C4B19F4BFC4BF378D
+:104C00004BBCD78EDF2D42FC7B96C7B7DB4704E653
+:104C100051FD9E7C9E472C737C7DAA2B5D417DAF10
+:104C200014368B71D81FD9581BC657DAB3022F110F
+:104C30007DDC6320FC85F7F977270EAA24EFF08A44
+:104C40001DC63FC683ACB1505EA383FC37DA7761E3
+:104C500046801D2ABEA3B00CE3AEA5220E32DEC6EE
+:104C6000641C7F8729B07D1CC65DBA65EF267C4732
+:104C7000F666E27790E2E3315A7C588BCB6871E2BA
+:104C8000E1E23212CE339EE359EC774EB4F80BFBDF
+:104C90001ACFDF6C9DDA44F75F7B31469238EE32F3
+:104CA0007A5C82784AE938ADBF3E9EB6BDF849C20B
+:104CB000B72F1A47BBA164B8F9556E77C6CD3F2907
+:104CC000FDE36CB25FFEFA5FA924CFBACE92DC3965
+:104CD000DD9F24EE71F6713F759789ECF5D360077F
+:104CE00065C5C8B3F6717CDC9EAE59848F87A2D5AA
+:104CF000C9D8FF09F17CDB1BCB96A23E1D8ACA3CBA
+:104D00001F9B71BBE650549ECCF5832170BAAC2436
+:104D1000417CCA624B9C07F49EF017BC27F63DEB22
+:104D20004D6EAF0437F2F88122E82D5863267E726B
+:104D30002C2F5BD2FCC83989E20BCFF6139FAD5FF5
+:104D4000C3E3BB971C5FE8EC36B1FC047EDB9A3909
+:104D5000C46F2ED55FCBD00A9E32C89F2B4BC5F7B0
+:104D600086CAB8FFF6C5127E5F27A36962257EEF6B
+:104D7000EEBD61CF3B70B0F4D2E27CCF7B2EAD9F15
+:104D8000A138513C7068BFA997D86FCE25F6BBA15A
+:104D9000F8D2D6D77589E3EDBFC4F16E1997A8DFB5
+:104DA000FFA3F1CFF8F8667C3C343ECE99F4E2F5EF
+:104DB000216CBB4DBABD3F82D04D7DBA5602529593
+:104DC000D31FB4205F5B308DC703B6555BC27BA594
+:104DD000C1B8A806AF87CBB8DEA578CE84F0BB8873
+:104DE000A37DD1EA4CA0E3D3D318D90DA7ADE27BC4
+:104DF00048B23262319D9F42DFC369B7268E2FAD24
+:104E000014E30DC7475E29AB7CBC7432DD1F4AF842
+:104E10009D8AEA526E67289D8CFC354C56472CA122
+:104E200079D5112867D25EE0CF53238CF2FBA0DD49
+:104E3000B584F467D585EBDB25E25E19F38A5CE87F
+:104E4000A7CB00798B71913B303E427E7D85FA691C
+:104E5000F34DF2F0F97699988471ACD0389E57C131
+:104E6000D42788EF68718DE3A6C8EF574914D7E8B7
+:104E7000C5F5BF6C8878F6B9F8B9207C3D87148AEF
+:104E8000B7BC32EDE162BA172FE21C1B14DEE50855
+:104E9000DA19B08E0DCF5510FEAEEC99F6CB3AD4A0
+:104EA00007DD32C179881E2EECAB93C23ED4ECAB49
+:104EB0003EB41363EC8DB784DE9080AEDE2A4D40A5
+:104EC000A7BB246EFF865EE6F66F85D95B109B4F0D
+:104ED000F5BE80FFAA08F7C36A76ED785FD8900D1B
+:104EE00070A8B8D9184902395DB1B5CC8CFCBA624A
+:104EF0006B9E8DFC4AAB0F1A3478273AF78FC53A70
+:104F0000B7F5F6535CE2A9F87BE61E33B5EF15F86A
+:104F10003309CF16CA0D85722B8ADFB4998A319175
+:104F20005FBC1EF47E5CDFAA76BE5E2D0E521F5162
+:104F300067E13CA78EF66FC5B2BCC1358BFC866BB2
+:104F4000CF6C45B9193C7FF6D815E40730AB89EE34
+:104F50000B3C5B6624383C858A08C26BAE4C79BB3F
+:104F60001573653AEF8C7A2BD9E1192666C4EFAE3A
+:104F7000662CE672ACBCC6310BEB6C593AC9E1F257
+:104F80005E35FD7ACFA09D9F31776316C2E9F3E2CB
+:104F9000439ABFE02AB32FD333F98BC787D61D7F3F
+:104FA00083F2CCAEE9D3C787B478CF70F1212D3E20
+:104FB0001BACF944174F0ECAFD73D0AF52F1DC2978
+:104FC0008A0F073B25C5E91A8C1B050F9D31137C01
+:104FD00045BC08FA9BF1BD0A38F61119F8BD011E4F
+:104FE0003F7A1AF371CDF83D3D85F26E7F82F9B8B4
+:104FF00045F83D3D9E8F7B18F371CD78FF83E7E345
+:10500000F688FCDE60D7198A374DF30CC9A7A27861
+:10501000C42D927FA6479F4F45F5F87885D1C6ED00
+:10502000D060AF89BE771E3C6E213E5BD9B56A0C5D
+:10503000EA63DA77C81B315E10E35FFAC8E7B5E2CE
+:10504000FD9E8FFC5E2BC6092ABA3F30ABC4772287
+:10505000B998C2D42847CD68EF231C28CFAFABD274
+:105060008A70FD5CBF7EE7FFF7EB7F11BFFEE13288
+:10507000EED7D7F847B9DF40F7CACB7B7DD6EB63D5
+:10508000F8C3363FF70F6F73E713FDDDE5CF4F5FD2
+:105090001DEBC7AFE1F65BC65CB735F6B9713CFFF7
+:1050A0001E448694F87EC1768F61383D707B62FD28
+:1050B0002E713C605B0DE7239ABF7F687CC0FBA22A
+:1050C0003BC6CFFFD1CB16FA7B0ADDCF26913CFF42
+:1050D000F4B9A47DA87797D7AC1E9302F5F2934953
+:1050E000CCC5E5912EAEB0B2C6E0B3A6268A23F8B1
+:1050F00072E97BA1F1F1821A03F1F78178418D7C8D
+:105100008AEA423FBFE6CC7B29F8E9EBA7A4703BD3
+:10511000DA174FAD93BCDD6C68FC0006CE655361B9
+:105120001735DC4EF0D65AC82EF8BCB842DDA113B4
+:105130005BD04F3091ED6CC7EF4F4E741B14104590
+:1051400009E20A3CBFB35CE811F1FE01C40F94FB15
+:10515000F17EC1E7C5F93D2FE4FE5CD4F9B306C783
+:10516000D1DE8B3F77479974513FA32CE4565B4DBA
+:10517000F9363CB7D0020343FEDF56536571C78C46
+:10518000F79A87E7CDECC2388523364EC1E311F19B
+:10519000F1098D3F55747F3607CFFDAE2EEE3F0AE5
+:1051A0003AB93FB3E27025DD33195C27DFDF5DCE0E
+:1051B000817B86E98CEF8B59B89F8BFC0AE50B3E0F
+:1051C000E9C1BF37C0FCE9F4F70B82C7DDAD76E477
+:1051D000230BE4C9924AFEED017F37FAA396BEDAAB
+:1051E000300FF3812B964F3C81E7B2BCCE44794718
+:1051F0004B5FADA5EF8A6BF2AA62F9DECDF8F768D6
+:1052000096174B5EAB8AED3555D83EFFB1087AF65E
+:10521000D8425C1DD04BF438F4CE27FFF6C7483790
+:10522000158B85DFBB8ECBD5E55D8B4DFCE3567AC8
+:10523000397724EF53B29BCF7655903F3B13E3ADC4
+:105240009E413953F11CC89F9441F9F3F7CA1D4799
+:1052500019CFF39F00F207D793B198C705E3CFFFAB
+:10526000350F3FFFE1E4C970FC13E507FF7B3BA16D
+:105270005CC939287755B4A72F1B94BF4A27D4732C
+:1052800086C7BF7902AFD387D1BF660BFC1C365FE0
+:10529000A3F31FE3F7AE2CFB27F17B0BFB46F37F59
+:1052A0006BF6D07D02CE5AB947F08DBF3B5F1985B2
+:1052B00062C27CE58CC4F9CAD77448F41D1691AF5C
+:1052C0007CD4CC2A0F3A304F4FDC4B08FB49BF3916
+:1052D0007AEFAFB63EE2C07B09928262675DC70992
+:1052E00092CFEB409F213DA8EB8FDC2FD5C1F34B34
+:1052F000D775EAEF3F68E5112197AB613FE44716A8
+:10530000797C730E71BA0EFACC61D5857EA16FCB14
+:10531000B17EA1A01ACDD2F203C35C2E25CCE36BE3
+:1053200064FD94EFD7D82079511E7C693F918FE7B7
+:10533000F75DAA9FA8AD4CF885849FF99152CE0FD6
+:105340006A039284FAA8C5E05F4BF9BD8725255111
+:105350009EE8BD02DFE70B3FED7E33C783FDD3251B
+:10536000CAABC57B3178BEFB0FF3FCF9FDE53C7F92
+:105370005EF3CB6A79F1E306FDB2741F46CBA7D783
+:10538000F2E3B5FBA18B77DB22A85FEC3075389197
+:105390000EB5BCA2F9A88B601C467C673C7E9D5B69
+:1053A000CB2AE79751BF61F59BFD6509F49B33421A
+:1053B0007E3E56A6CF238AD1CB9F289BACD3CBA9C8
+:1053C0001EAF97FF4FF965E70CEF17365CA2FFEDB4
+:1053D0005B97D8AFA12C817DDD6A4DFCBDD0D4F1A7
+:1053E00082FFC6FDBD1136E47E0F976FED92FACBBA
+:1053F0001914E732519C4BE32FED297CFCB7055F74
+:10540000D1CA7382DF0CF75D49E378DE6FA3E47BDA
+:105410000BCFB1F480DE4F56D6A1F7934DE8CCD038
+:10542000D5274646EAFA57F4E6EBDA27474B74ED00
+:10543000979D2CD7D5A7F54DD7F59FF17E95AEFE5C
+:10544000957EBD9FEC8A734BE2EE1D71FCAE048C21
+:10545000887D6F96E5EBBA7EB90DFA7DE535E9F703
+:1054600035A659BF2F6D5C5748BFBF8276FDFE320F
+:10547000D07FEFF9F2FEFB4D1E55F8EF0BE8BB7F36
+:10548000BB6ADCF49D6BEDFE9FD6EFBF0137C3FC1A
+:10549000BB80700000000000000000000000000061
+:1054A0001F8B080000000000000B53E16760F851FB
+:1054B0000FC15BF918182EF021F8F4C01CCC0C0CAD
+:1054C0009C40ACC8C8C02001C4FC40CC06C49E0CA3
+:1054D0000C0CFF81F81B10BF05E22740EC0CC40741
+:1054E00058B09BE3C6CAC0E001C4DC40B3789889D9
+:1054F000B7DF8917C17ECCC3C0700E889FF1D0374B
+:105500000C061B5E27403FBB7E43ED3A2932F0FE7E
+:1055100006612131609A1447F0A78AA3CA0B8B2138
+:10552000D8C9D294D9950FD40F00F19321F08003FC
+:1055300000000000000000001F8B080000000000B9
+:10554000000BED7D0B7C94C5B5F87CBBDFBE92DD16
+:10555000CD26E44900370960501E4B80C84BDDF072
+:105560003252C40411828A2CAF10027914A9A5FF0B
+:10557000DABB0B2804AADE5851A37F6A17041B2D3F
+:10558000DA80D11B6DE02EA208D56A684551AB0DBB
+:10559000888808498C8F6AB57ACF3933DF66E7CBC4
+:1055A0002E89B6FE6FFFBF7BC3AF1DE79B993367A4
+:1055B000CE3973E6CC9999B3268385192E60EC1BFE
+:1055C000FCBB9C319B893136A62B6D573A86AB3993
+:1055D0005DE5B7F9BDCC6B66ACCE6FA5748B3F9D16
+:1055E0007907C3779FA1306867EC5EBF8BF2BFF08D
+:1055F00017525AEB2FA27A77FA4B287FBBDF47E985
+:10560000667F197DAFF157537E837F0DA59BD445EF
+:10561000692C05FA66458559C98C553D9393B71990
+:10562000725B668D4F504743FE15233366017C9FA6
+:105630004AFD31D5BD69E0E8AE7A1A9E9BD449FD9A
+:10564000104EED128E17B3325B8C7A5938CE3B97E1
+:105650000878F6D69A9CE4A8F50623BCDB4B00DE5E
+:1056600050287085AC39D1E15D8CF03697A8BC5ECE
+:1056700072B0263B3A3C0FD6ABB941C04B0F5863D2
+:10568000D41B83F536DC20F0EBE7ABC98ADEEF787C
+:10569000ACC75CEADF5AAD8CFEBEC9C6FFB7BB4ED5
+:1056A0005D2CF246CC263136AEAB9D3E652CC070EB
+:1056B0009C2AF315121FDC995F7F93CFD84D0813F6
+:1056C000DA0726B19011FA0F24B1E0FA2CA9FE4CAA
+:1056D000AADFDAF7EB6F52A5FA014394FA26D6A0B7
+:1056E00060F9CF518E80EFF7F97329DD28E4E7BE2A
+:1056F000A106C6B05DBA393808DADDE3F790BCDC44
+:10570000ED1F4BE5770939FC7721674121670FA22F
+:105710009C41BA15E5CC8CFDF95A4B014EFBDE7865
+:10572000B6D94DF2B598F05419C1DFB077C8F6CDAF
+:1057300000FFBE1B569DDE06F46F6B1EE63142BDB8
+:105740007B866AF2C5BC2CB9ABDE3DB34F38170D72
+:10575000257A97219CBB3D827F2A0C2CA2DEDD336B
+:10576000C2F52AB0DE5D9E30BC5064BF774D09D7CC
+:105770005B457C56584983BD3B5F763085E6230800
+:105780000AD1D784F48579F9EC80EB9456689F921E
+:105790009C97C6A0DDFD381FCD38EFDC4417AD3D2A
+:1057A000D2D907DF332CAC1AE10365F71B015FD3B5
+:1057B0006C7722D2E5F66B8B98328CB1BEA23C3569
+:1057C00050A464015CFB9C2205BF9B6643397C7737
+:1057D00089F2E435BCFC762C7774952762397C4FCE
+:1057E000AA8672C8DBE7F2F23BFCC089C15DF536E0
+:1057F000019F7DC4EF74FE1DD88AF4318DE6A98621
+:10580000F713282440BF83988EE9C27FD3A07B334F
+:1058100016DABBF0B50DAEA7BC86DFA6C17194D772
+:10582000F0B15DD82F6321A47D97F465DE5C311F54
+:1058300058773A277AB3A5F24CD593A0029D325FF0
+:1058400032B200B02013C413E1E9DB153103E1D912
+:10585000E3FC4BEEDDFC330D95E9A0A547053D3497
+:105860003A6CEC2FD3C13240A6C3C601321D2C17AF
+:105870009C9F0E3B989BE81C8B1E5ABF9B87C8FDC4
+:10588000C65D24F7BBF922B9DFB88BFF39FDD664BA
+:10589000C9FD5AB3E57E6BB2E57EAD39FF58BF4C0A
+:1058A000F5C064407DA5FD5D28E9B7AB99EF2CB646
+:1058B000473D87F349D373A6641FF3D9BBF809EBBF
+:1058C0001463F99170064B7A15E07C8AF5008EF727
+:1058D000FC705C3A3883F470BE16F8B0483DDD0DBC
+:1058E0000E1BA81F8749E1ED428688FE99EA6345B1
+:1058F0008EC8761E5DFF39FAFE9D8A1887E1BCFDD1
+:10590000BB7574CDD6E39326F06186F3D183B97469
+:1059100070B2F470DC029F90725E386EFD382E1407
+:10592000FD071469FD027A0CEB6AD70EF8D13A959F
+:105930006709EE04FD10DAF7E5295C07CE355EEB6A
+:10594000B640FDFD232DA1CBA1FC5CB0206881F207
+:10595000C94F1E75A21D53F1A451C572C33E1BADA4
+:105960002F6D3B142AAFB2B4DC3901CA3B9E34B26E
+:10597000EDD45DA601C7774AE81416E2F9521BCFB1
+:10598000566CDB7F23B62F6BB2301BC0AB787AD955
+:10599000CC09905F76C8C4B04AC5CEB5E6BE905F6C
+:1059A0001E541A300FF8D23A15C8B3057742FD7568
+:1059B000FBBE6C43FCCF359A06213E67609D70C3E9
+:1059C0003AF192A3257536D0A73CB87B1AB62FDFE3
+:1059D000A57840C301FE3B0F6620FE8F281E0BB04A
+:1059E00070457D3C7347CC97538D461AEFAA6D4A9C
+:1059F0009001BC65AC761AD2B302898378782C41C9
+:105A00009BD235DFCEF8EBA83F2D5FF108F407ED10
+:105A10002B1F573C38E44A03F3E13C6E7BDA56F225
+:105A2000901DC7BBD63CD881E3DC68C67ACB820B1D
+:105A30009FB2B911CF6DE66988EFD66DE6D2A14865
+:105A400047B6A06828E2F77F65FCEA8C5E1CEFAAE7
+:105A50009196ED46C083D943036739BAEBD933B089
+:105A60005EB923D6CF72067A9FD6EFA0B97858D701
+:105A7000F72F0D89A43F56D41B99DBDAD58F261F4B
+:105A80008123423EF63A88DE1A3F57B9F814D0F81F
+:105A9000B92A51F057EDC89F35AC3B3E77225FC81D
+:105AA0009E7651FA0B583731DD02EB3CD2EF5EB0F7
+:105AB0009FDC64977BE8FB03602761BA15EC244CFC
+:105AC0001F043BC92DEC24ACB71DEC244C77809D02
+:105AD00084DF1F067B1CD37AB0C7F1FBA3608F6302
+:105AE000BACB1FA0EF8FFB6B286DF0D752BA07F926
+:105AF0000669A33F48F59EF2D753DAE46FA0EFCFD3
+:105B0000F89B28BD5DD0D1399115E03AEAF43217FF
+:105B1000923D6986B7C004F9A4229E4FBD21506012
+:105B2000867CAA0FF24097BE2B430516C8F7ADE658
+:105B3000E5036E6193AC901F10E0E5D9B77B27D9E0
+:105B4000209F5DCBCB076F0D4C8A83FCE0202FBFDD
+:105B5000685768523CE42F6AE0E5C39BD9643BE494
+:105B60008787783EEF25EF6407E4F35A783EFFCF4E
+:105B700081C94EC8E7B7F2F6E3CF068DEE28EBEF0A
+:105B80001E937B31AA9C03CADB5E3503F266F74D98
+:105B9000A8128F2AA728DF68F252F9FB4ABB578563
+:105BA00075BED1ECA5F22F94CF29FF94C947E5F13A
+:105BB00006A580F2661F95F737C451BEC914A0F23E
+:105BC00011863E3C6F0E507981A15F01C27FC614E1
+:105BD000A4F26B0C8378DE1CA4F25FA8C30BA64072
+:105BE000FDC70DBEBDA8EFD62BBE32B40F99DA901B
+:105BF0008EFA4AB32B77E2E0D0CECC30D33CD8F348
+:105C000087FC87681EE05F32E64B1F46BB14E01C32
+:105C10002438268063EC194EDECB632538792F9724
+:105C200069705E2138B6DEC1D9F3F278199F97CB3F
+:105C30003538C7088EA377E3CA7B65A28CCF2B2BA0
+:105C40003538C7094E62EFF0693C2AD3A7F168984E
+:105C50003E67707D589FD23B7C46BF26D367F46B6E
+:105C600061FA7C4CF864F40E4EE36B327D1A5F0BE4
+:105C7000D3E72B82D3BF77E31AFDBA4C9FD1AF870E
+:105C8000E96332209CACDEC179EA6D993E4FBD1DBF
+:105C9000A68FD380F419D4BB71E5BF23D327FF9D12
+:105CA000307DD2089F21BD83F3D43B327D9E7A277D
+:105CB0004C1F37E133AC77E3CAFF8B4C9FFCBF84AA
+:105CC000E93384E08CEC1D3E4DEFC9F4697A2F4C2A
+:105CD0009F3C8233A677F88C3D25D367ECA9307DB5
+:105CE00026109C71BD83D3744AA64FD3A9307DA6DC
+:105CF000109D2FEDDDB8C6BE2FD367ECFB61FA5CBB
+:105D000045700A7CF5840F03388ED8709E3927D3EE
+:105D1000E7997361FACC213853014E4ECF70C6B764
+:105D2000C9F419DF16A6CF02827365EFE03CD326D3
+:105D3000D3E799B6307DCA88CE57F56E5CE3DB6554
+:105D4000FA8C6FE7F4A9B278263BD0BE4B649EED87
+:105D5000D0E492930D079C9037D99907C1BEA484D3
+:105D600076207C582BC92E543D9A9DE2616887CEDF
+:105D700070BA3DE8F7316AF6086BA1FD827D57A243
+:105D8000E40FFAD230E916C4D701565BA45D923015
+:105D9000364EB28712BD4952BE4F615FA97E4A514D
+:105DA000B6549E567291549EE1CB93F29965E3A549
+:105DB000FAFDAB2749F90BD64C97EA67056649F916
+:105DC0009C9AEBA4FA836A1749E517D6954BE543ED
+:105DD00082ABA4FCC5F5FF47AA3FAC619D543EA22F
+:105DE00069B3543E32F40B293FEAD00352FD312D02
+:105DF000DBA5F24B8E3D2A958F6BDD23E5279C7E3C
+:105E0000466707CAFBFFF5058CDB831966B20743BB
+:105E10000E33E5CDFB6C64FFEFC73CF0D3DC7706B7
+:105E2000E5CDCF2E7627E37E1A01C07A5FD0B7EC9E
+:105E300042F4F7DC3CDE77A10BBEDF6CF68D7045DB
+:105E4000F1477854DF3E03F98B5A14968EA9DB8014
+:105E5000699C51ECD72D5CBE3666E53F148890D323
+:105E60009AFE30FF207FD86026FB5593EF8DFD4BC7
+:105E7000D31746F4B3A1BFB964FB50FE7DB11DFB3F
+:105E80002B7A11E75995B96330E2A5EFC7923D56D9
+:105E9000EAC73AA08CFA790DFB89F07B590694E9A0
+:105EA000FAB1966C17DF453FC7705CB1FAD9983DDF
+:105EB0005E1ECF8072EAE75D5D3F1B0794EBFA89B7
+:105EC000E3E381EFA29FF7CE3B9E9C89F2782E58A8
+:105ED00049FD74E8E866B960A5AE1F3BF583DF179E
+:105EE000933F17760169C0674B4729C9C17FDA58CC
+:105EF00000E4C29C59FE6BCCB3B76C6C10F6E38621
+:105F00007EA11ECBE5FEA3A70D49349ECFE280FF04
+:105F100011766AD77E3640FBE2A5024516048C60F6
+:105F20007F5B296473C9AEE20137B9216D3A30F065
+:105F30006EEC678BC33308F26D4D93CD8BA3C8D342
+:105F4000D25AD3A9D648BF88B6BF99C472ABA1FFB5
+:105F50005D369794D7D2958A8B097F04E54FC0BEF2
+:105F600085C17EE0CFB02F6040AA774D7C9FF60EB2
+:105F7000EC6F30DF0AFB1B2C676C2DB53B21FCB4AA
+:105F8000276E578248EFCF7EF24313E9F1007B354D
+:105F90003D15FD6EFC6FC19A78F4F187F15B18E84E
+:105FA00023E5415D661AD2695F48FBDF8EA72DC1EC
+:105FB000ED48D79A4CA0A9A897CDD8EBB0C9CD4849
+:105FC000A26CA6612C63B3AB8BA7A6D12C52FAAFFF
+:105FD000023C67358E34410BD6666ABDD163EF82D1
+:105FE000CBBCA613481F2BFC4338D714423EA2FF5C
+:105FF0006B8BE4FC5CA676E581DF838DD9826FA292
+:106000005FB7D7847C2D4AE5F8CCC5340F8BB9BF78
+:10601000A3C4C5DB6AF8542D36B110ED4F03290C2B
+:10602000FDD18164AA779DB6CFD4E15762B27A8B55
+:1060300080AE250B8D44573DBE6FEE8BF71A86431D
+:106040005A73B7095D9B3DE13FCF2797B332DE9F7F
+:1060500046574D5E4E09FE9E40FE43FA3EF21FF04B
+:106060003E29F8DF25C79CFF5516DF4CE47FC7FDAE
+:106070004646FC127C9F23F8BEB456E6FB1CF49304
+:1060800043FD39ABB382EBB17E5D1F89BF307099A0
+:106090000EB5774D05B5DA0DFFB7851C5C57B3FB20
+:1060A0007964EFF565BAF1093EDC28F8305F478F77
+:1060B00039826FF305DF96B1C06D19E43F0A9AD0BB
+:1060C0002F36AF4C61A82FAA7EAAF1AD55E29B4FA7
+:1060D000E39B0EDF1B05DF6EFC09E79B1EEF56C13D
+:1060E000B7D6BA8F4D2CBB3BDE7A3C17ACD18D2B8B
+:1060F000A0E75BAD38777099D1DE29F616F439192F
+:1061000051FF9AC22BFB9C8CD00BD716154BF9B9BB
+:1061100025F3A4FAF37C0BA5F2EBCB964BE5F3AB9E
+:106120007F28E517ACF989547F6160AD54BEB8662D
+:106130009354BEB4F62E29BFACEE7EA9FEF2E03633
+:10614000A97C45FD23527945C36E295FD5F4B4542B
+:10615000DFB06FC8D5285F2F1D3532F4977DEA79FF
+:106160009FFC759F7A4C1EAC538932370EE5D94D92
+:10617000F27CCA9F4BE969BF87E4FD8C7F2CA56D3B
+:106180004D07ECE87FAC8A03BD9F0876B8F1CDB52A
+:1061900035FD70BD81F6E3196B36B6AE0D40FE00DD
+:1061A0001E46C1BC99516766A1510CA4BB6F589E95
+:1061B0003B8C11E5AD3D94D7A92CD4A77BF98CD6A7
+:1061C000E8DFDB958EC119E8277CC3C27646F8EB81
+:1061D000BA9F57B04CB42B62959F35B0B2C8F3ACA0
+:1061E00093467E4EE2344E3A698474A599CFFF956A
+:1061F0007B32263127E64383ABA3F85DC2FD350031
+:106200003269C8E71C69DE2FABBBB86B9E33EC2745
+:106210009BE476797094F47D45FD04A95DAEE27B44
+:10622000D708F5CEEE37D27ACD4207065C330CF1B3
+:10623000F39EC4EFAC2985ECAE16BFB7CFC9818CF5
+:10624000FDD15F48E9ABFE224A5FF397507ACCEF6D
+:10625000A3F44D7F19A57FF65753FA8E7F0DA5AD98
+:10626000FE00A527FC35949EF4D7527ACA5F47E911
+:10627000697F90D233FE7A4ACFFA1B286DF33751EB
+:10628000AAE9CF9EE4EFB4585FCFA0FC459133F369
+:10629000AD6C5DCDC42E398B532DEB50CE34FACE80
+:1062A000A8B308794895E42111D76192B31ECAEBCF
+:1062B0004C420E63B58F5E8EF2D6F77B9037C6D612
+:1062C000911CCC1472F75DE58DA1373E05E529538D
+:1062D000274FB21C6A72A4E9815CA568B83AA64B44
+:1062E000AE661AB99DA4C9D5CFD14E8C626FDDA020
+:1062F0002A62FDE3F611F36518D07E5B25FCFECC27
+:106300009D4EF94ED1F77A00D782F5D4602EAE2398
+:106310009DB97F1B8CFEF1CE6316867EF858E3D3C1
+:10632000CB4B6CBA7B69FF501A84456D54F7725B96
+:106330001CA7ABCDC00A591E9ECFE61FF3013FE359
+:10634000FEF3E23CDCD7C27795915D15F41447F17A
+:10635000B73394F1B49EE9ABD53FF5C097F9786EA9
+:106360003E53CCF3B803467EAE1D7AC8734DC4F9D4
+:106370000CECB7D3D1EFDC31C8EC22FB21D457A60B
+:1063800063B0AF44C703833E1B8CE71B9B400E7179
+:106390007E750E1C9CC0CE231F3DE9F99EE8B928EE
+:1063A000D8B797F434333C37027A6EC7FB2FBDA5BC
+:1063B000674F7AB227FD786233A7B353D8A7B1E805
+:1063C000DC3E09E65D1439BE475565396603F97947
+:1063D00087467FDC9746D0FF52BB9BEA3FB7EFADC5
+:1063E00001ADD04F67E385098C9FE7905DD7F1A49D
+:1063F000B0DBDD99321F5BFB125C0DCE734FBE3EEE
+:1064000000F7C9B76106E6D993F145BF5253BAE028
+:10641000F5F61C3ED6B8767FCBF9D99EAACDCF969D
+:1064200001284F9F093D10737C3DC9298E0FE05C08
+:10643000A5F0F16D3016FD0EF54C787CA3537A353E
+:10644000BEAA04335346007E0EB3992530B643F5F9
+:106450001D54691FE7690DA09F625FBC673DB0A432
+:10646000CA79E6E5901BDBC9FE8C15F536976C3FC3
+:1064700025BA64FB29C315693F751E7AC8E903FC78
+:1064800056A51B5C2747E13AE715EB1C5F5735FC27
+:106490002A1AB25C76098E9CEFAC550A1B489EDC2A
+:1064A00009B3A39C9769E9AA74B3EB24AC5767EAD4
+:1064B0007312B0DF337EAB8BAFAF2E17EF37DD1526
+:1064C000B9BEAE5C1347F535FC62C1FD67E3C75842
+:1064D000237BD78AEB2294E5C4AE1F939FEA2766FD
+:1064E0003A976E367D86F6BB2D57B3DF55CA6B7073
+:1064F000AB1A8C01CB08FCBE4BEA0FDAB9B5336698
+:106500006C175B6E54764AE327F0DF8A07EFB46FAF
+:10651000B5129F7D003101E0B5ABF61A94AB132A9A
+:106520009FCF55424E2BACAD669F9BC8DD82F2BC1F
+:10653000682CD326CCDCB7404F7FF0A289EE69B13E
+:10654000AF007A7ED7558125ACC8894ECF458D2BBB
+:1065500066E0BAFD8141DB0FD7E6E3B8CF314321D6
+:10656000EAA573EC8FCE5111F3758889FB63580D42
+:10657000DFE704E01F8E6F69ADBCEF595627E74B8C
+:10658000D9AC54D4B7A55B4C2C08B82FC77D933633
+:106590006ED0BF1926EED758C6AA37E03EFD5E136F
+:1065A000F7F72C72313513F0AAF88F5FE6A3DFC737
+:1065B00063E27687769EBC3C89E35D3E3B68F642AB
+:1065C000FD771B47CD018D0BED831BC8FE29669E11
+:1065D0009DAC3BDD17D7C8F8F584BF1E5FCD0EEA32
+:1065E00076AE2DF048AE57BCC1287AEE329322F633
+:1065F0007F7C7ECC36C9FE9C7926D9EFA3C9814920
+:10660000C8C109D577B5690CE73BF251513BCCBE07
+:10661000887AE6AE7AB3CF57CF82F58C546F9E2935
+:1066200005EB754CA3FD3103791ADA55CFD605EF8A
+:10663000460E4FAE57F11F8F3D15007929FFED3DF6
+:106640004E06EBE6076A6DAA07BEAFDC799BD30B5B
+:10665000E96935E0447E7E10341646A3C796303D86
+:10666000BC7605FD69423E594D80FC149FED34B95E
+:10667000C8CF5F6F0959404E2B1B97CF60C3297F4E
+:106680009CE7377E64C47C93CCAFF25FDF93EAE68D
+:10669000F76CB83F8985C8CEADDCF1DE345C2FAA3B
+:1066A0005807C999BE1DF6FF7912CDEB85E684EE39
+:1066B000E58027F913AAC42CAB6AFCF9474627E604
+:1066C00065F92813F62AD209F7F9B7991CC9A7E288
+:1066D000217B09BB04E7B9460F16E476EBFA47EED7
+:1066E0001B7E1CF039BBE345A73234523F7039EBB7
+:1066F0006C58FC2BAB21B61E6903398CB48F00306B
+:10670000B57337097BBB99A72B4D2127DE6759B994
+:10671000CDE40109642B1F3332BC07C0DEB004D1C5
+:106720002FBAE2B1E75F1B0F745FB1DB943C830FBC
+:10673000C7AEA476F1A50AFEB726AF8B0FE54F3C96
+:106740006F760FE3DF6F49EAE2C78ADDFBCD6C5855
+:1067500077FA4D6ED86F6EB547E14BC3F169B8CE8D
+:10676000AE7FE4AF66F4277EB04F616959DDDB97F9
+:106770006D7B9ED63BA413F151F029CCB76EFC0A79
+:10678000CD7C6634D573A11E8CC5AF6542EF823CCB
+:106790003FFE0CDEFF79D3E2C1F1973D7E9313C734
+:1067A000F1BE5ACDE5FA97B7A5E2FC2E3305525D4E
+:1067B00094F2EF650FFE88E46DD9911FA592BDC0DC
+:1067C000BC1906D2C5810C1CDFD2ADD7D2F84A99CC
+:1067D0008FE4AEEC97C622BC8FF8A9CA0A77479916
+:1067E00017716685F0797F3B183230BEF7717F896B
+:1067F000FAEC8F46BA17C5D80FE9DED88FC45861B6
+:10680000E5A3FCA756CEA7E3424FE24496E475C742
+:10681000C616E4CF99FEDE343CE7003A0404BD948A
+:106820006F00AEF1C8D434CE1FE656F3453BD0EF2F
+:1068300093F13BD66F31796DC3A576421FF2FE57B7
+:106840008BFE01EF385CAFDE4F8D6EEF8D11E38371
+:10685000BF1616215F11F39BCFF71D9BF8FCD6E600
+:106860007BB0B810CB3F7995CF1F6C87EB03E01559
+:106870004AA3F2FDB315D207B0AF8E36AF7798C4F6
+:10688000BC96CBC152A4F51EF0569584483901F848
+:1068900049447FDA07976E817611F65715F647F56A
+:1068A000CC5DDF23D68765420F98CC30FF2FEE9A60
+:1068B000FF6C2B9FF73DD9932B4DC1871FC0F9FA71
+:1068C00086C51370E37C3515E1B83FDC75E0B5EBA8
+:1068D00040AE3F6CD0E6A9AC3FF5F3B46CCF1816D0
+:1068E0006D9E7E6887FD55B4790ADFA3CE537B2B5E
+:1068F000C9F1F7AD3F35BA0D35CB7A13F5E033EE7C
+:10690000D8F4D3EBC1DF9BDC4447BD1E84BF57598D
+:106910007E77B9D3E44D93B3F2DF545C80FA262C32
+:106920008F9ABC85E5519337FD3865BAE9CBFF2ACC
+:10693000F4CDF5D6C26BD02EB67630DAAF14CC36A5
+:1069400006719F6CFD84D17C9F74433CE5E71A5B24
+:106950009F409BEFAD8AB9C3701DBF9E054CFCDC08
+:10696000BCD64476EA57DF7C3311C6739DA0EBF5A5
+:1069700040E6AB800F25AA128A033CE7A92C909031
+:1069800084FE62859D88C0E3FA32398F7F97A576B1
+:10699000C1E9A9FEB7B5ABBF6B7AC4CFCFAEFE8459
+:1069A00029ED2FC0708E90A3E2667E4E51355A09B4
+:1069B00066D3FC6B558B22F6098F99B99D7164CA19
+:1069C0003563907E05738725907CD70EA17D6095F9
+:1069D000D05B9D017702EAF3CEE61CDAF7751E5A0A
+:1069E000ECF045D15F07849C3D2FCE59DAED4AADDE
+:1069F00011E4BD9D7590DD12B0DBA2FADDEACC0694
+:106A000061EF08BEC19F11FA2F1172380F9A26E468
+:106A100045F06DF6551FA8CEEE7CC0BF1311FB8666
+:106A20007F94BE28D748DF03B6D6694551FC338F23
+:106A30000A7D7DD9B35F98719D9BD25CA0221DA772
+:106A4000D88D92BF63BB365F87B2A188D765CF2E42
+:106A5000BF630CC871D521A3C706E3AB6AFEC8ECBF
+:106A60008BB27FD3D313E1A3FDD86AE6F6F151537D
+:106A7000D152A4EBD16BF979EE9FCC9E8A6878CE87
+:106A8000B6723CE7B1A24F472BFF7AF42D98EB0882
+:106A90004D027A74DAF9FDE4EEF2C7E77DA74B09FF
+:106AA000AE55500E8D3C9FCCEFFF4E63BE3B262A69
+:106AB00034DF2F8FD45F054DC58FE17D96CA66C543
+:106AC0006580F24AB5D58C725CD5B45B45BBFC07DA
+:106AD0006EFECE82A9D5C36647F8B75ACDDC9F7447
+:106AE000E06FD7CD47FA7E3CDBC2102FEFD08F9CF2
+:106AF000B8DE7FDC3C8AE641AC71FDC1EFB9660AC5
+:106B0000FAE3CD5C9FE9E5615A72BC94BF7632EB43
+:106B100087E7BC97595A6FF244E1DF3A0B9FA7BD54
+:106B2000D66FD6FF61FA6D22E8372ED7A648FD361C
+:106B3000DDC2E53E42BFA545D36FABD6BAD3502EDA
+:106B400056EDCD4943BEAE3ABC34259A7E7B41EC2E
+:106B50006B0F8B7BD2EDFD40BF8D88D06FFD40BFAA
+:106B600045F1838FB66876670FFACDFADF33FF5EA3
+:106B700040FD1665BC5708B9D3F45B61F35AD26F78
+:106B800085FD8CD27DA4CB2CC28E8BA9DF16DE7343
+:106B90002DE54D9EF828F2837445FD7658E839ECD2
+:106BA00007F5DCCF2CDF4ECFCDB3727C7BD473FFE7
+:106BB0004D74D6F4DCAAFE0AD92FDDE590EBB95569
+:106BC000595CCFADDACBF5DCAA415CCFE9F5DBA4AB
+:106BD0006EFA8DB7AFCC85F6B44FCCBAEF06BCCF0A
+:106BE0005762F258A1FE0CB7F6BEA07A4CA4BEFBC9
+:106BF000992586BEF380BEB3F7ACEF5E417DA792C8
+:106C00001E1B88F3482F1FD307C64BF7D58E7E7106
+:106C1000EA37BFC5F9F20723DD077ADDC0F743FB8A
+:106C2000BE38350AE7DDCB880FCC979D42FEDAFCF3
+:106C300063499F4E1ECAE77BC5A1385A272A1B15F8
+:106C40003EDE5B94A01BD781BF7D4EFBE4F97BF950
+:106C50003E79AE85D383FDD8C8DF4500091646C806
+:106C600043C9E7E5E4E72B519915EDD70587A67FE2
+:106C70008076EB82CF6BC8DE5D80DFF17EC5EED61D
+:106C80000D99D0EFFCE50AED3798B80FA1DD97B864
+:106C9000BE793FDD5FD1DF83D0F4F9FC6AF9FB02F6
+:106CA0009D5D7F408C13EC59A20B7BC518D53F77B7
+:106CB000404F0F0F1F7FC56A6E1F87E901F4712BCC
+:106CC000DDE9011C9DB130B56BFCF39F8471257724
+:106CD0008D4BA3877E7CDAFE6481981BB1C6ABD155
+:106CE000AFDB78357AEAC6FDBC45D84517B36138C5
+:106CF000CF5E37F8EE188372F17B183FE03367DE22
+:106D0000A0B4483DFCA2D0E757F98E4F497523BD8A
+:106D1000F8FBBBEBCA763F9F0AE3B8DA9B9587572F
+:106D200011AEFD9BD9877E8403B60ED26B9A5C5D53
+:106D300068E572FE7701E7685FD7145A3F9A141727
+:106D4000CD97904E6F897B6155404F9C8F554D621A
+:106D5000BD0179C3F9364D5B7F90FEF09F573573C7
+:106D6000FA57552B44FF99ACE320D2B73259F1843E
+:106D700000D4B4A6DDB7E13DAA176CF01DE76D990C
+:106D8000E2D9CEC961CF488D2A976A34B964D54318
+:106D9000C8AFA0AD830BB05E12BE17793D05ED13F1
+:106DA000BDBD7199A5E528E271D98F4D6C1BEB6EC5
+:106DB0007F68FCCE857FDF44BBCFD383FC0E12F609
+:106DC000E50B486F3BD2B5C38C725F15E2EB86567C
+:106DD0005EA5BAA7107D347A37C1BA309AD31BDFCB
+:106DE0007DE9E979B5964779C6FACD8A09DB5F096D
+:106DF0007CE80345930D5F1CD4E417DF89E9E98241
+:106E0000FBFF8C88F98E7A29F2DCB1B2E908D165F2
+:106E1000FA6A30AB22E88EFAEA7CF4E9361F9AF679
+:106E200047BD07F56DE7C38556793EECB375BC38B1
+:106E300002FD5B7B15D207AC3951DADF5F61E5FB00
+:106E4000A603361FC96DC76113DDF7D6EB8DB1827E
+:106E5000FEB89F887C0737190782E7BB2E1B7B573C
+:106E6000C3239BCB4FA4BE7EC1E6233EC5823F4DCC
+:106E7000C08F652F85F1C5FEF03CC52DF7A75F2FAC
+:106E8000343F4F4FE3BA46ACF7DF755CE1F349D6C8
+:106E90006266DC9FBFDB1C71CE3447F8F9353F5882
+:106EA00044BD999631B1EBA1BF2504E37E61D74380
+:106EB000E4D73DF7E8F19928B72B7E676456E07375
+:106EC000DB2E070BF17B14665C57CB1B8D51CF4536
+:106ED000185B4FF8ADF8AD83F44AF91E4B7006B459
+:106EE0002F7FEADDE1E89F6A5BC7F54BE051211F88
+:106EF00081D6E1785E5EAEF2F3623DBC1F0B79395C
+:106F0000FB747C09EA47A59EBFEB2C6F986BB244DB
+:106F1000ECCB2BF1C08DD7A37BC8814714F28377CC
+:106F2000C76F2DAFF708D77BE54DA620BE0F2DAF5D
+:106F3000DF46FBD9AAFA8FCC68C74DFEED636447E4
+:106F4000543519653F61BD3164213FA6F138A67AF9
+:106F50007F5D656305CDC7CA06E10FD3F98B56FC8B
+:106F600076EF530120CD8A277EED443D73A665A7B9
+:106F700093FC70F5DCCFA6DAD5E87EB89EFC6F0DE9
+:106F80009BA2FADFCEE07FC0FCDB6A95FD6FACBE52
+:106F90004FAFCEC1573CF6E983782E7476CF870F7A
+:106FA00022DE2BBFFEF8C19FA27DB2CFE6C2F5AEB6
+:106FB000EAD1A3E457D7DA3D25E655DB23BF7EF8B7
+:106FC00001987F6D6F58E8FE55DBDEF707B8619CCE
+:106FD0006DBBBF4845FFE5EABD5369DFB2FAC9C9D9
+:106FE00069E7BB47827219ECC579889E0F071A8D35
+:106FF0000CDF419E3B66213B23EC476DA8E07E6998
+:10700000B7F09FEE8A7EEEA4F9FD2A1BAFB9FA52C3
+:107010005CF71A4D1E377D177EC09EFCA6AF023F5F
+:1070200047F4826FBB845F5CC7B773F81FC09F3F94
+:1070300059657FF3A78D4B7FF5009635F689E937C3
+:107040000DF5825EDAB9D636ABF71D2BCE873DBF84
+:1070500021FF34F20B6C6ED6F6D8A703D0DF70DABE
+:10706000D47123DDBFD86BA17B42E57B5FA7F9D14B
+:10707000F6E4113A2F62E25CA98D85FFF83980D8D9
+:10708000CB54ED70707FABA03BFA63DD4EFA2EFC63
+:10709000AE5C6E357F6C2C3F6C1F9BB8072ECED933
+:1070A0002A76BC65663ABFB63216F9745C3A17D4D4
+:1070B000C6AD87E7423A5C12799E10CBCF2DF468BB
+:1070C000984FFC1CA16D9B385F089F1B30D62F0F7B
+:1070D000EFBFF3F3EEAAA0F23A8B321FB5F304A789
+:1070E0004D371F83BD3B47E819DFEF460FC5C6F795
+:1070F000AD1A5DCE7E155D1F0FB129E2FD812FD740
+:1071000016B1EE2C10EB4925D08BBF27E3F89E1566
+:10711000FBBBB38F1A83B80FDED07080F4AA7E5EFB
+:1071200057B2E8F143C6DBB83EA96CDA3F1CF5CF95
+:10713000D9679F26B9ABDC75DC1C003807EB9F30A4
+:10714000B70EED9273D4D7C1087D7DF6F1FDC3F97A
+:107150003907DF47EAE15F21E05735CBF0AB767DB9
+:1071600024C15F116830BBEC3DF77346F5CEC5F125
+:107170009E6931515C94330DC6C268F14A86622023
+:10718000A9942E3A6D70F0F771C62433D991AB1DD6
+:10719000638F2524636A76E33E7AFD5A7E1F72FD73
+:1071A000CF3CE9C897F58973E81CA856474757B202
+:1071B000AB00F7D7AE2945A351ACF47A20D16B9040
+:1071C000F05EED284CC3F7DCB70A7B84A91E7ABFBA
+:1071D00067744E2BC471185D06972DEA3ACAE1997F
+:1071E000EC45142FC2E492DFD37DEFF11FDCFDE408
+:1071F000F80F817EFF68FC07467130FEDFC77F080D
+:10720000603FFF02F11F42E4B7D1E23F247FCFF19C
+:107210001FD63239FE83E06738FE83E0E7FFC67F82
+:10722000F8FF2BFE8331EEEF53303E8316FF21250E
+:10723000CE3C3532FEC38571095323E33F8C8B4B23
+:107240009F1A19FFE10771595323E33FCC8FBB68A5
+:107250006A64FC87AAB8515323E33FAC8D9B4879FD
+:107260002DFEC3DD7153A7CAF11F664E9D02F9B60C
+:1072700038DFDF71BD8A15FFE13D9C2C637A8EFFFC
+:107280000070CC716362C77FD0C38915FF01E02411
+:10729000109C18F11FBAE11323FE03C049273831AF
+:1072A000E23F74C32746FC078093457062C47FD0D9
+:1072B000C38915FF01E05C1497123BFE831E4EACA0
+:1072C000F80F006714E11323FE43377C62C47F008C
+:1072D0003813094E8CF80FDDF08911FF01E04CA541
+:1072E00071C588FFA087132BFE03C09949F8C48895
+:1072F000FFA087132BFE03C0994BF8C488FFD00D65
+:107300009F18F11F008E8FF08911FFA11B3E31E203
+:107310003F009CE5042746FC073D9C58F11F00CE2A
+:107320002A821323FE831E4EACF80F00E7A7042722
+:1073300046FC876EF8C488FF00706E253831E23F46
+:1073400074C32746FC07807307C18911FF410F27CB
+:1073500056FC0780732FC18911FF410F2756FC0788
+:1073600080F32B821323FE43377C62C47F0038F501
+:10737000248731E23F74C3E7BBC67FB085062A3954
+:1073800014FF81E24486E33F247FEBF80FCD88EFC2
+:10739000FFC67FF89F19FFE166BBEFEB38F2837EF3
+:1073A000B7F80FB6F86F17FFE1667B517C3CEE2F04
+:1073B000BF65FC87D4F86F17FF01FA498F1F13BB15
+:1073C0009F58F11F7274FDF414FF01FA1974DEF175
+:1073D000C488FFE0D1D1EDFB8AFFF045DCF9E33F43
+:1073E000FCCBC559806D0A9EFF149328B27F99B8D3
+:1073F0000BD7C6FF93E32E90B1F0AF1477417BBF5C
+:10740000DF60C2F5EA4DC1F7D7845CBC25E22F1CD2
+:107410008B197F217815F94597CBF117A60B3ECE36
+:10742000F3C9F2309DF1F386E953B278BCCC325DFA
+:10743000FC855CF9FC7A86EFC81400C7AEF2C8E39D
+:107440003822E46166C947CF217BAE1E1B3DFEC2D8
+:107450002CC18F621D5DA60BBE158BF47A7C920247
+:10746000F23CA3EC888A749DE96E55C9AFFD038D8B
+:107470007F6E897FB3055C3DBEB304FF665DC9F9CD
+:10748000A7C7FB55E49F13D2B251C43F3DDE7A3CFF
+:10749000F5FC6791FC8E889B51C0E4B80B93AD72EC
+:1074A000DC85A92E39EEC215E972DC852BDD72DC94
+:1074B000851FE4CA7117AEF2C87117AE1E2BC75DE7
+:1074C00028F6AED5C57DD8A48BFB70972EEEC3FDF4
+:1074D000BAB80FDB74711F1ED1C57DD8AD8BFBF020
+:1074E000B42EEEC37E29BFB8E6B0547F69ED1129F2
+:1074F000BFACEE0DA9FEF2E071A97C45FD07527903
+:1075000045C34752BEAAE90BA97E6FE33EBC2ADE03
+:1075100003BF26DE031F13EF81DF8C11F7E1AF3FBE
+:10752000FFE2B6C8F7F85FFEFC9BDBF03DBE41BC56
+:10753000838D15F7215C1E23EE4357FB6F1FF72148
+:1075400025F99FFF0E3FC7CECF3727C44FCAB1A73B
+:107550007CF777F8D716C9EF99E796C8EF9973ECDF
+:107560005C9FCFF3C9EF9AAF2F93DF3597D97CD9C2
+:1075700088873EEEC384786F8E1DF5A5789F1FC265
+:10758000F7A9B0363E8BEF53217D0EE33E407A10D3
+:10759000E33E407A08E33E40FA7B8CFB00E94B185F
+:1075A000F701D29731EE838A712302226E448D88CF
+:1075B0001B512BE246D489B811411137A25EC48D0C
+:1075C000681071239A44DC8810C139E13F44E949CD
+:1075D0007F0BA5A7FCC7283DED6FA5F48CFF34A554
+:1075E00067FD1D94B6F93FA7B4B7712334B9FC33D6
+:1075F000DA0D66EC9FCBB126A733EC033744CA699A
+:1076000091FDA20D28A7B1E245CC459AA6C48E17DC
+:10761000112E8F112FA2AB7DEC781169A3BFBF781B
+:1076200011FF16CFE5F51F8D1731BF5A8E67B06079
+:10763000CDF9E34594D98A56A35C6AF2F86FF1FC60
+:10764000BCAAA77811DBEC8A58AF812E6877015D60
+:1076500068BDEEE1BDFD738E8773713FD1997BD11B
+:1076600079E31CE8E52236BD795C83EBBEE738118F
+:107670003DD155ABFF66398F5FF06FF1E78F5FD07B
+:107680002D4E444FF105067D467AB2B771227A5AE3
+:10769000177AA2E7ACEF394E444F7AB5277DFAC787
+:1076A000E99CCE13E2CF1F8F231C17CEDA72901AFB
+:1076B000BBBC34B555F10EBC60B68BFC27EDBBC42A
+:1076C000BD312F73BB52F93B75B437DBF7240C6720
+:1076D000F47EDDC5BCC09F78F15DD9B57F3F9EA724
+:1076E000DFEA64DEC4248A07EF36E6E03E6CA415C8
+:1076F000FD29158D1FBDFC3B806B6B36D27DB276AC
+:10770000C0A185EC3E6F22F22D9EDD4EFB743CE362
+:10771000FAA64FE47B66DDEF37609588F39BA946B8
+:107720003BED9B3AB7F27B9E4676F17D1347D37DC6
+:107730006A167413FFC84E5D21F0ECC414EBFBAC69
+:10774000643F2E3BFC447E88F1F3CA48BF419F4210
+:10775000D94F5367730EC777952CE06D41FB7B893A
+:1077600080975224FB6F3E5C547808CFE997F84A23
+:10777000E91E425A89ECCF61E2DD386EC7C2F7E5F7
+:10778000009FD226853DA0747F475ED67CD706DC5D
+:10779000E72C0FEAED6F968B7256CEE23CB8EF5DA8
+:1077A000512F973B1CE23E879DD97B45B7D60BEF07
+:1077B0009B987C5EBA7942587F9783EEC32E3BBC80
+:1077C000D88CCCB2A4CB74B3B965BAC5E7CAF4D12E
+:1077D000D3CFE191E9A3A75FC258D9FFA5D14FBB91
+:1077E0006FA832715F34C8EF91767B87DFB48DF07C
+:1077F000D4D34F4FAF510E714FA28B5E45D654522A
+:10780000F98467861A22F9D6CF874C7B48C1FFEEF0
+:107810009F1C5C4BAD3C0E15F5563A07CD9425BC2C
+:107820005D3CCE078C2BCB3C341F70478FFEDD7840
+:10783000F66721F7EFB26F20BDA9F8B9E38BA0740A
+:107840002BCADB08FEFB0BE4AFD27E3781795CB834
+:107850008F6AF05BDD4B543C1764EE2503F13CD09E
+:1078600045E99DE2DD6FFB5046FBFE86D027A978F7
+:107870008E76675EC74CF43F542D6545B87EFDC8D3
+:10788000C9DF5D6C12E90827F7CF6C2E3230EF6844
+:10789000FC1D1E635041BFABCB7BF872B4479B4DC0
+:1078A0006E7A47ECEA78F97A2A1F45EFA3330CB5D4
+:1078B00023111FA84FEF6BDB9BDF752E8ED0C36D9E
+:1078C0004D770FC1FBC5F71BA2BFEB2D7568EFDB32
+:1078D000F8FD8E115D71064A1D63281EC19DD9D029
+:1078E0004F657127F15193CB0982FECF954E27FC4E
+:1078F0009E6C56DCE8AF9B66BCE107C300BF7147D6
+:1079000055AEBFC4BDEED1A2FED3CC938EF88EBBD4
+:107910009429387FC6BDC13C0124717529DDA7FBC0
+:107920009D73DA21E4D7946690279C0F67ED1EBC07
+:107930002A3FA645BE2F9738C57700EF175E728C99
+:10794000913EBBE498AABF1F63C4FDFEB856F9FB85
+:1079500004DDFE739D26774E968A72B7E52B23E1F0
+:10796000D5DEC13CEB006EFB92BE746EDBFE0923DC
+:107970003BB1FD2B6361B4FB25773BB8DFEB7E3376
+:1079800023FD7D7FA99DDE393C5B5A7E01DA179F7E
+:10799000FDC47741343F65849D96C0DF9F7B13D83B
+:1079A0005894C35B154EEFDA8CA228EB9626779A93
+:1079B0001C6AF297511AE78B765F33D9C9EDA34958
+:1079C000A5B98A19E5679FC290AE6DEB00AFF3AC25
+:1079D000DB01B62E13F1A96AFA98EE61599B95A8BE
+:1079E000BFCBF384C3C9EF03AE0BACC5FB1737C3E2
+:1079F00024423D9561AECD8A063FC0B6905DFA80C7
+:107A0000C3CDDF0D58451C21B53603EF23B4354DEA
+:107A1000BE7203E0F900CC07E4EFFD260FE11DA8DC
+:107A2000608CEE930A7F5DBF996CDBE608FB77AF55
+:107A3000A3E030CAED6107B71BFBF83C0AE2EDF9A1
+:107A4000FB5F9D08BFFD730BF1AFAFB037B5762775
+:107A50001D9C3E254EEF016CCFCA9249F9787C4EB1
+:107A6000F7923EE837077A47B1AFB4753DC9C7E82A
+:107A70007C22C96E089272F27ADD2EE9BE7780E62A
+:107A80008D360F584861F85E5FD36F4AB31272802B
+:107A9000DC8FB6DA4378FF2CA90CC69D8CF13CAC88
+:107AA0001C5E8B7A56F66B813CE6A371CFE8BD3F36
+:107AB0003A5211BEA6F7347D796B22D747B7DEA5BF
+:107AC000523CD0AD6AAB0DFDA9595EF7240C4D9325
+:107AD000A4BAE95E4AFF323E0FE3737E9918B603FB
+:107AE00060928FFCDAB820DA7BA60C94A714A497D6
+:107AF000EF4307A4C30F753C8BE682C7C6FAF0FBC1
+:107B000053424F08BB669A58EFC6BD67E0EF284363
+:107B100097B3C8F7457A3D0172FF27FCFD9EFBDF56
+:107B200053294E68583F944EA3F58919871E403952
+:107B30009BF022E3C751423FB8E01FD2E792977C07
+:107B4000EB118DEFAA17F4FC66216B388F3FCD3611
+:107B5000EA10CCB7C875D629D67BA1476E2A1EB8C5
+:107B60001EE797264717DCE231FA22E8A86F1FF6D6
+:107B7000532AD6F077770EEA91978C783FACBD0008
+:107B8000F80D747912E70BD03BF193E095C8F72D0F
+:107B9000CD57D850BE6F0D4D72CD803689D622623A
+:107BA0005E22F3923F270FA8837122D69350C07EA6
+:107BB0005D2DCA72A6E03DAE42C9DFA3FD2E1E0CAC
+:107BC00094F812E603C871E43D564D3EF5F2A8C99B
+:107BD000EF7ADC60E1F91D7ACC21352A0DC4200B47
+:107BE000DBEA423DABD997EBC3F65C22ED33560B93
+:107BF000BB68BD7D9A95D4C0FE645ACF57E3FA04A2
+:107C0000E35F9DC2681E68E3D0CB63D5E706168CA0
+:107C1000D81F54A91D748FAFEA73330BF6C171FBE3
+:107C200026E1B835BA8C1474D1D321DB29F69B82B6
+:107C30001EB1F1CC77E1FDD944AB976D243C27D13F
+:107C40003DE786509E15D7DBDB7478F602BF39D14D
+:107C5000F053ED31F013F1DB2630DFEF5A415EF3E4
+:107C60006FAACBE0EB057B353D827FFA7933B6A96D
+:107C7000FA803962BE687E5DFD3C19D1CCAE41BA56
+:107C80008F0BA90CCF5F7B9A2F9F88F156C5737A13
+:107C9000B5CFE9188CF2B943F5553BC9BE683560DC
+:107CA000DCDFF6A719CD67CFFE934E8A6FD4D2BB27
+:107CB000FBE99A1DA5D94FFA7A9AFDA4E95DED7EFC
+:107CC000F876A7CF8FFD2B4D209F30FEF52EBE2FCF
+:107CD000DAEBF0ADC3EFF130063C4A62B9A12CFEFD
+:107CE000FE5596FF58F21EAF93E706A013FD4E1601
+:107CF000E8FF414A773CB4FEA73813F9790BCC660C
+:107D0000D443FDF219EFAC92D1FDC97EC3990FD7D0
+:107D1000A77E79FCDE5F50ACDBDB84BED5D2BD8EA6
+:107D2000A2FB117F93CA0296BCEF8E37A28AF7B1ED
+:107D3000B73BBDF7A1FC590BBD348E4C17F3A0FD2A
+:107D400099A93628F86E3269A55BE1F7B059D73B9F
+:107D500026809739C35D80729289FB68ACDF1C3D39
+:107D60008ED6134E9364677A58384ED513D82FD8D1
+:107D70009907CD80779F195ADC2BEDDCC6A3209D97
+:107D8000DA1C7308E9B64F156E8F27727AE9F7038C
+:107D90004878C44F15F9DBCC4CB525B1AEDFE134E2
+:107DA00058C98E8F679E06D44B2F3BB3C5B9A8A781
+:107DB00006F3FFAE7658138776C9F19D13677954A1
+:107DC000A8E2BCB47338EE99409E0F23BE6D133BFE
+:107DD00007DF4AC4E818C0E5C66B94E2E268F46FB6
+:107DE0003249F4B7E13E3B520F3ACCB48F6C53E2C8
+:107DF0003C38CFDA962B1C4FC52AE206A9F2FE5F6B
+:107E0000E8234DBF763AB308FF7816A07D00B37A19
+:107E1000AC748F5DE08F7115C9AFB3373EB81DCF1D
+:107E2000A3747114F57116272FB6D3BD8B2D7B6DFE
+:107E3000B42FED2CE2E7F39DCD16D2BFB1E6691A5F
+:107E40002A83F3C40B04BA7520DDD24CD589A8F778
+:107E5000D2E6F3F9AFA7473B0E14F73B7F3005A3FB
+:107E6000BD57D7D2F4F4BEC56897A567A453AA7DC1
+:107E7000AFB3AB51EF611B1314294EDF10E851EC87
+:107E8000738C09F0FD9CEF8FAF7959D7BDF6BA38E6
+:107E90004EBF4EDFF8848751AE40E0E8F704B4737C
+:107EA0004DB19FD7E22769FD6CF15B8B31E467DD53
+:107EB000A2E9365C075298F7CA793829B798D84EA4
+:107EC0006A972BDD77BDD73FB218DF276726F07B97
+:107ED000B49F6C994AEF9953D93ADB60A0436991FA
+:107EE000C183FE80738BDE741A407E1665B6E4A3F0
+:107EF0009C26987C990963C87545FB8D6525E660CD
+:107F000008E8955C070A81E818B892E8B8D010D55F
+:107F10003F9C9DC0F79D6F89F5243D7D40F19251B6
+:107F200091F97E44574D8E60FE642C19DD150F13B8
+:107F3000F87951429479D06E624DF85E42D347C9C8
+:107F400042CC347DA8C97132CE0FB4E38A403F4998
+:107F5000E77D5035B5EBF70C95E617BE403BD6797B
+:107F6000E924D237306F6B48CE73B9FEB4A13E8B93
+:107F7000F05BB5EF7DBD3FBE637AFB671F3BF05DF5
+:107F8000CB5FD40E07EAAFD3B7FCC98171C0DEBEA8
+:107F900085EF936FD4D9FF5709F90826144D41BADC
+:107FA0002EF0FF3D3FD25E636BB8FF7979507EBF04
+:107FB0008AF7BF23FD80150DFAFB00011EA74CFCBC
+:107FC0003EA79E0FEB041F96EFDA66CE7463FFBEEA
+:107FD00039D8FF69B1BF39DDE8A0F7141A3E8B76B6
+:107FE0008D34A3CDFF97668B78A7D762E27AD93B11
+:107FF00003DFE7F804DDF4781EDC174FF096DEC3EC
+:10800000DFAF2E84BED6805EF435F3384AFA712C89
+:108010007DDB3D0DFDE84B3729B48FC3FAB7C03A7D
+:10802000E15BB391DEF1E8C7B93020FB73F4F11ADC
+:10803000B5FDC032C1FF25F86BBC3951E23836F3CB
+:10804000F774CB74F645E7A19C781CFF9A0461672E
+:10805000E7B34B306EE79E43D909D1E26168E95935
+:1080600071DE8FF7FA313DED67944E4970F3785D1C
+:10807000CD476E46B9AA6CDA4DF111F705DFEB3347
+:108080001EAA14347F6144A12A10F6D87C618FEDBA
+:10809000615C6EC08EDE8CF27FF9E73A3B5A8CF35E
+:1080A000064DEE0F2591DCDC80E31A8EDFD54FA262
+:1080B0008DEBEE04F9FD576FC7A58D471B9F565EEC
+:1080C00021DE9FEBDB69723E45C8DD921DC51BFAC0
+:1080D0000229D6EF7D7F8088234771B63439D2CB11
+:1080E000C932C1B7B03C34DF41E3D2F806F29E2E6C
+:1080F000DE25A5A33FA327B9D0F3BFCDD43A00E72F
+:10810000AB9EFF6D31CE7DB627F0738D256EEF34BB
+:10811000F4AF8079B8C115613F9C566B0FFE14E730
+:10812000D10E2EC791EB22194B2F9A689D5DE570F9
+:10813000A725DA05DFC6E1FB454B00EB69FD9CF2A4
+:10814000D7CC1A48E78DB5B3060EA4771B946AE521
+:10815000A5F77FEC44FBB43D97917FA1CD21E37B54
+:1081600004179B319872FAAF545BBE7E0B75D08EAC
+:10817000168ADF7AEA2BE19FF8CA52186D9C6713C2
+:10818000B81DA8DD3FB951CCA31B9BF97BBB455B58
+:108190008BCDE4075823DFD77849714DCB84A6BE39
+:1081A000869166E4B39E1F4B3D57D03BF06E7C61D9
+:1081B000B7135F97EADFB5897B4C0B847CCC74B92D
+:1081C000859DE6A377C44BEA8C64DF2F7357D3FEFB
+:1081D00066851AFD3DD61897E1BCE3D18F6361A394
+:1081E000427A4F8FFFB21D6B37F465387E3EBEEE8C
+:1081F000E308F5233D23C6C95A2FE7EF32C5BAFD80
+:108200005FB8D1C6A4008000000000001F8B0800EA
+:1082100000000000000BB57C0D7854D5B5E83E7326
+:10822000CEFC24334926FF21413C21111212E29059
+:1082300084000171F24BC4080301826075405184CF
+:1082400090207A5BEFABB79990682DFA7AA358CB60
+:108250006DEDFD062BAD0A4880A08126E9041403CC
+:10826000040D820A96D68014B1053280B5587D8FF0
+:10827000B7D6DAFB64664E92426F5F87D69D7DCE9D
+:108280003EFBACBDFED7DA6B9F65ECD94B720E633B
+:108290000FB7CB8CE53356FBACEC65A98C2D63CACC
+:1082A000E9BE0C46BF6BA9F85F67E59204C6EEC550
+:1082B0003F5568DB57553278AE5CAE9985CFF56F88
+:1082C00090995982EB1EEF53C971D036498E4618EA
+:1082D000C71E379EEEB33066817FD746D33C8C25D0
+:1082E000E0FCFCD723B1A75260FEB38AFFBD08783B
+:1082F000EE2CC0E181799678F873F47EF8FF32C7EE
+:108300008C2F2478DFFDEDF229730E5E5D6D32C097
+:10831000F8A52F496C1D8CBFFF69DD78B12EFD3AA1
+:108320001EDAF0A3B9E91981710F7B9F0BE9C3DA5B
+:108330005456C0D87D023EF6EA7F05EE73F84DAE86
+:1083400008C632ED117167B3A05BC0265D4B63AC0C
+:10835000CE1A99C3A2A03533C2233B64F46E02B88F
+:10836000D644C08201CE355BA3BD1EC4E3EA68C615
+:1083700046C0B8F68D26B70DE6C4DFED8C9DAB6F19
+:108380009E9B9E0EEBAF7F7A6EBAC2D82CBB9DB17E
+:1083900089408FB6E7685CB7E29A6487FE2A4BDFB4
+:1083A0008FEF5683F03899D363995C696286C07CFD
+:1083B000FA7659B3F1CBBEA0751621FC56F86312BC
+:1083C000C02FFF3DF8D5C4685B006EFDBC7FAADFFF
+:1083D0001002F74A85395B6C81F568E326DA0DB443
+:1083E0001EFDF37A7A30E6A5717ABAAC443A04D12C
+:1083F00017E15400AF3D1D56EF5A89F888E0F67436
+:108400008411DC1793D6CD3D93C7D8617C00E0AED4
+:108410001DF132F55F515C6E7B3C5EF48F728DC74F
+:108420006762199B323CDE6046C6607C2ECE0FE34D
+:10843000768539F3988CD75DB1C807D31BFAAA2C7F
+:1084400040AA3AFBA40A05DE33FDB9BEAA30E83FD4
+:10845000629FCCFB9BFA8E5A1C8C35B02915A5F077
+:10846000FC63700FE7BB5E9B6F762D66C05735804F
+:10847000534B0CB4C7C6BC8DF256D35B5921454251
+:10848000CB984FCA057E7046FAAC39D4678530AEBA
+:1084900033CAFD1FB8BE55579B2EC938EE98C2E5AA
+:1084A000A53B8EF0A000EC61F05C53B853B503BE61
+:1084B0009A622C8EC654BAEE098BC1BE535583AE58
+:1084C0006BF4C0E7108E2603734643DB75604C5493
+:1084D0005FF6F078EBAA57AB14A0FFBEFA0C6AF572
+:1084E000F78B4CF674073C5F6460EE16DBE0FBAF85
+:1084F00022BF109DD414A4736DB789E41C7F12F0C1
+:10850000FD2AA1876A81405100CFAA63CC171E893A
+:10851000E3CABF50B06D95D8E910BE6281BE3C3C45
+:10852000DC37DAD6E27C4A309F703C152BA9554ADD
+:10853000D07B4B6D99217D39D19081EB6172B8630D
+:1085400013E0574E31ACDE01EB976F8616F0A1D8E1
+:108550001DF212689B4BA6CB4BA16D34B2852DD872
+:108560001AD8F2603C750879D2DA4B76D76F90EE64
+:1085700017DEEF2DB0929E1A6927F916EB6D941C49
+:108580003ED4439E2EE6D804D79A6417E37CDCC21F
+:10859000908F7F2FE671980D3B55E0D7F7EC0F12C7
+:1085A000FF3AA20C8FA642FFA3E615150AF0AF23EF
+:1085B000C570251578F478F34ADECF325C190DFDCD
+:1085C0004F9A6B787F2A4C99CCD8C9E655159E6C8A
+:1085D0009C97EB31B6C59985EF510C12C9A9B2D75A
+:1085E000E46D843F9B22393F3519812F6370BC4A6B
+:1085F000E39F6A28DE6C05FE578A9DEA6A1BC73531
+:10860000F2C3FFB4D5F0285B0DAB118FD822BECFDB
+:1086100088756B7460ADCEAC39A8175A9C5973231A
+:1086200010AFEECF11AF793DBDD3510FB77EF049FA
+:10863000813B9BD30BE7C9EB612C12D673E1AD9B59
+:1086400036CA52803E97EC45E7515F4BA0A61F8784
+:108650007549AA9DDD0372D7E864AA09D695C85E5C
+:10866000B2A3FD30207D4005B532AE5F3AA35C5F1A
+:10867000E2736CA48FEC4CB5DDF515BE5FD3CFACC7
+:108680003766483DACD757A69CC765067C1093D289
+:10869000767C29EAF3DF9A1DB7A8088F933D0E7008
+:1086A0006C333085C5107B642870DFCAC21DEB5067
+:1086B000DE1D2CC903F2856823E0E01707F6D028F9
+:1086C00064485B073C5FCAA09D8470DD4AEB9291D1
+:1086D0009F2630978C7AAB8079ADD8F677BC95849D
+:1086E000F87A3E8CDDE782D6F22A737A83F4467EEE
+:1086F000B444F89F1563A436DCD83217F934FC1261
+:10870000B3A31FD0FF0B9382F38360DC89D71DFBDB
+:108710000D0CE1FCB5D16B8F82BE3F53515F66817A
+:10872000F9FA059DB5799F37A999D1D0AF8A9108FB
+:108730002FBF2EE2F6D8FF85C9FB722AE2C7B2DA54
+:108740001B2457E3A3F9B8BAB8E2B1D1F07C4B4788
+:1087500038C3F74FEA0C3720FE376FC90D433ED8B8
+:1087600086B881F5C798ED8FE07C315700DE54BAAA
+:10877000EE24BC2AEA8428C06BE14C9BBA0EF0FEC2
+:10878000EBB09699C8F7FEAD06F632BC629BC931D4
+:1087900007FBDB2EAB76D4B3BF4E6D09A7F56C3566
+:1087A000D07AB685FBC7AD01B8D7652815089F629A
+:1087B000650AEA5FC550AC3E02D7A74573FDA8E93C
+:1087C000E39A6895FACF4BF0FE5C1C57447253262F
+:1087D000DB48DEFAFDCC6B86F7C4CFEB95911EE14A
+:1087E00073809590DF159FCC703E17121A5A9BD15B
+:1087F000AB929E75DA9600DDA70B3D3BFD644D25DF
+:108800008BC48EE3D854986F9FCDC8705DB7B13ECE
+:10881000D902FDDBAE32870FF9E7AA427E981DFE32
+:1088200005FB7B65629E5F494C898271455FAA0AA0
+:10883000F257110BF5DBCA36947F81F6ADC4A2BBAB
+:108840008EFE5C24B64AE03ACCB3285AF861A3D82D
+:10885000A86BA4CF60D6046147555C7FF67FE1BA70
+:10886000FA2B4C0E5CFF769BF3E3A9A8077B8D6C7B
+:10887000131B5E8E7E550F1A7D0C08C7D570E68DD2
+:10888000253EB421FDC76D68F684C17AC7A5F3F90A
+:1088900091DF506F8CFD455C2CEAED8868AE4FB4DB
+:1088A00056E32FE4237B14E723FBAD01F9FB5E7451
+:1088B0002A8DD3E409F90BE7D963F42E760D6117FD
+:1088C000812FBF877CB9DDC62A90CF9F1961598857
+:1088D000F2A4BD67B7E07B7DFB54C39A2E23AEFBA9
+:1088E0002FA0FF01EED2E4ABA660FBDD15C7E12DA2
+:1088F00093BF25BFFA62BB44FE7C423BD7D7C17C05
+:10890000316268BE7801F17A3DBED0C7011A5FECD2
+:10891000B81E5F74FF637CF18B68E1DF0ECB17DF5D
+:1089200046E2FA1FEB2849647FC78F69137C30DC6D
+:10893000FD2956AED7F4D7DB053E779B9AEFCC41A5
+:10894000B9BFCBE040B906AAA7CC05FBB23B9C3F20
+:10895000C794D569D8DFAE703DB2BDDD4C7A64BB3B
+:10896000CDED267B9D6461E82730C5DDF77DD47FA2
+:10897000C916755D10DF3E2EF4408BD137E573F4D8
+:108980007F0F70FA4EBE2B5736C1B8110F70B9CE9B
+:108990003F67DA28C33CD53145BE6818DF17CDEDF7
+:1089A00062DD1918057C597BC644FAEDADCE23E58E
+:1089B0004E1BF9374EE4AF497B8E941767E378CEB0
+:1089C00047DDA2D5FA53704D3164768E25017E5D68
+:1089D000C24E4C615C0FB9903F72027DE634523C4E
+:1089E000A6F1413563596827E6F639CA908DAA2A5F
+:1089F00042E95BED9B4971DFFCE3CEB20858D77CBE
+:108A000097EEBEA07FB58EFEE007FF01E564D5E6D8
+:108A1000DE4E1BF2ADCAED698B697516F77B56A762
+:108A2000A1FFAFC911FD004F2DBFCF78795D901D1B
+:108A30005763F83A9F752874DFD367F2DE0297FE1A
+:108A400037E3CFB5087BF3AD90E3DCC7DE588CFC91
+:108A50009BB7DCB90FF1BF284EA6EBFFC97C96345B
+:108A6000A48F4321FFABC5A8967C2E05C631C595C2
+:108A70006183FB7BE2C3F3F0FDD531EE6B4827A6A3
+:108A8000F8BBF1B94985B9792857B6094DB1687F66
+:108A900034B801AE8A4DB6001C1A5CE785FEA98E7B
+:108AA00059720DF180CFA15E693B75D682CF6B7490
+:108AB0006FE9B8C4E91D447FA47780FED27DD8D782
+:108AC000F06011ADD6FFE7E9EF1B89F41896FE18A8
+:108AD000F747FE8FE83F2A6608FA833F958ED73521
+:108AE0007FAAC5047E7576A0AFD1BDDA5E44E31CD3
+:108AF000265819FA4F9D1057A21CBAA3D1B9613B51
+:108B0000EDFC5DFDBF3F3B0A5C4036292686CB93DA
+:108B1000C93F06FD8D093E89FCBE0920F0F7909FF4
+:108B20003592F49D43E0879D95A4B319DC05BF966B
+:108B300082FE9F2F16E56082B9D287FCBEC33A3D04
+:108B400005FDB75CEBB434E4A737331E3B8426E75E
+:108B5000CDE4E53B5F51037E8EA6D7F68969B5F774
+:108B600097C770FADF0E6A16FD3D740D83E1D0F4ED
+:108B7000379205E1907CD5866B56D2C7ED7D80AFEC
+:108B8000DB110EC06B97C45A517F17199C7125E8F1
+:108B90008FC5FB14EED77D3D4A05BEA96C7FF73823
+:108BA000C25B69B1F930DFC21CC6F37D41F912BD69
+:108BB0009FABF9259ADFAFF92D5A7C89FE0DDECFE8
+:108BC000C7EB00BFDD0C00A2FDF159BC0DF0FEE7C4
+:108BD0002FAB994E21AF0AACA352AC6336EB25B84C
+:108BE000D8B7D7AE4D03FACC12F8A8EC86B8300748
+:108BF000EF337617E0E12E85C78B7739203E0CE204
+:108C0000A3D99343FBF89B9E1098E77AE3F5FA7F8C
+:108C1000AAC817FCB371A6D676831D3A0D0C70B0A6
+:108C20009EC73485A3658F82F1803BD380FC582793
+:108C3000EC1A84C943DB2321AF8586BE1C07E0B74D
+:108C40006BCF3764FFF6EEF9E623F4E7A67CA1309C
+:108C5000333C5FF8457E14EA07E60A9DB7EE8FAD18
+:108C600056C6AF13FFD48AB5EFAFC78C18C267A141
+:108C7000F637E79F5F8FF37D7946E1BC2DDE5F6EAF
+:108C800072A7DB6DD8F2787FBFC4FD1DEDFE7E2399
+:108C9000C00DD737C568717FAF42F919F89983E8DD
+:108CA0007C17C6FBB901BADE75AEE20B2567307DD5
+:108CB000F0F7FF23DED7E2FCB744FCC0F69D30A9F5
+:108CC00000D78CD64714F4A36724C9CC19F4DE3B33
+:108CD000542B7306C5FB6FC4E8FC907DAFAD9F05B8
+:108CE00076A4AE477684A1BCB66F3F9483FD5ED96F
+:108CF000611D828FF4F89DD1FE8882FC9F10CBE528
+:108D0000E67AEF2F1C077C722BD29D911F77B14022
+:108D10002239D2D377EF9E9FC7F6650F8FEFE1E838
+:108D2000AFA7C36FCE1747215EAE470F3DDF76C2B8
+:108D30003A3DB03E1FACD303FED6DE7A3BF5DFAE44
+:108D40004FA2BEC6AF751DBF8C457F4DE3D3B25851
+:108D5000CE375376AF8F65B600BD347C5D1474ABEF
+:108D6000668EF9B3E0CF5D922382F48487F52615F1
+:108D700004EC55F5B172F233347B552D671B51FF6E
+:108D80006AF60AD3C2A8CFF4F6697E7A9111D5AA01
+:108D9000DE2EC1028DC8BFD50B43AF57F4342B1163
+:108DA000D433109D2449E043F8D51A3C1F3217C133
+:108DB000ABA7A7069F1E2ECD9FAE1674837596E1B6
+:108DC000D2E7AA45B48E417655ACF746EDA93936BF
+:108DD00034CEBA72AEF4FD9C21F87538BED5DFD71B
+:108DE000F44039BE20975A0FFA1109B10944AFF285
+:108DF000AB26E6047BC14686B1CF82F3EFAF649227
+:108E0000BD7B54D8DFE1F8A6F6AA81B96303FC6301
+:108E10006C7BCE8AFCB35B69B662DEF136DB9CC646
+:108E200028C053E91F8BE7A15F57D76760989A2A3C
+:108E30006BBFB40FE3F6BAE3CC81FAB0B8BDAB04B4
+:108E4000F9ED6DA557A638FA4BC69E0BF20FDBDA8B
+:108E50001BADE83FB5C5C914A7EF8FE6FCA8DD6FD1
+:108E600089E5FCD776E6F22CE710F73F13F74B4F76
+:108E7000E51AD148F6C74750BEA1FC6903ADBF54FF
+:108E8000B25755A2FF718791FC7A885BFEF07DCCCA
+:108E900037B599B763AABEACED878FD881102DFF87
+:108EA000E7B30633E60FE6488E97615CB9EAEFC296
+:108EB0007EF9BC54DA8799F47F65F25FFD774B94B5
+:108EC000F7280776C17EF93DA95ECC3FEC9178DFAB
+:108ED000D3C1F3FECCEE899D05EFF9A03276C23AFC
+:108EE000E229AD7F4BEE3A261838289E7A6C17DFC0
+:108EF0003F7AAC4CA2FDA3327B0AF304F155F9D3BF
+:108F000040CF3CE0C7F6C462E4DFAA0A997983F84F
+:108F10007ABECBCABC41E3F7877178FC92D98BF952
+:108F2000124D5E670AFEAE5E181B327E0EE37EE2D5
+:108F300042D66C44F9AE13F0D415013CF0FC4C1150
+:108F4000A7DEED4E09796F256641606856DC68B290
+:108F50008FB3BFEC23B33A473E796C31BC87657061
+:108F6000F9D0E4AC4CAE69223E48921C181FCF9752
+:108F7000C0AB9451DF85CAD1ECC9A1FD394EBD7E8D
+:108F8000089577BD1ED7E47C7E876CC4387A7E91C5
+:108F9000E46043E803BD3FADD703930C8E7730AE5A
+:108FA0009E7BD549FC35480F9CACF887F4C05B200C
+:108FB0005B93415E7FA4E9839BD84DA80FCAE42D43
+:108FC000EB913FFAC1AE9987E00FCD2E68F176396B
+:108FD000C827F2033BCFF725CAAE829CC606E2ED56
+:108FE00001FD007E8363087FE657B16921FB4903D9
+:108FF000FA22C86F3016FCF37E4319F88BA65C8406
+:109000006F24F3E4919EA2FC1EB43ECAB3255DA278
+:109010003C4A1DC4F114CFB35F125CA8D7A49800DA
+:10902000DFEBFD092D4F3B42E409F4FC3090B79B88
+:1090300067F4229F69FC506EE772513E4FA6FCB95F
+:109040009E3FB4F75D8F2F7C12F085F477F842C80D
+:10905000D38DF2C5218D1FD259FA8DF083C6071A20
+:109060005FE8EDC5415DDE65387B71F23AF6E29D61
+:109070000C23E965BD9DD0ECC28138AE7FC7C7F235
+:109080007D8A9999F36DE8578C407D80FE9EB037BC
+:109090000379A30D9C0FDEE95BAA486837500FA443
+:1090A00006E15DE44D35BEAB7D9A51FEB052E89FBE
+:1090B0008B1D3C9F56572A7B2DF06749FB73EB793C
+:1090C000DF48F9B622A54BB1C0BCB31D9203F335FE
+:1090D0004E917F9B75D5E455293F3FF47E7A95E00C
+:1090E0001B8C7370FC6CA7E4851074901EAABACA1E
+:1090F000EDBE5E1F5589FDF22ADD7EB9294ED0F501
+:109100006676F3BFD2EEC7C72570B919868EDAF33B
+:109110001A1D35FA4DC0B1283FFBBE36A911DC3F00
+:1091200046FACDB8AAD03CA3E242FD962FCFE7FE87
+:1091300027C574627C5DFB25937BFCF0F05FCF2F2D
+:10914000BD59F3C3855FAEBD7726C8780A3A863A23
+:10915000FBA1BDE7BAF6423CAFA7D3E4B8D0784252
+:10916000A387A64707E15BE8D9E1E8753D3DABE998
+:10917000B37FB59ED5E6D7EC80F65EBDFE1D2E3ED4
+:10918000D3F4E9531B0D9417B94DC4C1B7893CEB17
+:109190008342CE970B7DDBFF178B01FDAC6D9DDC11
+:1091A0001F7198ED87D06F08E4F3385D9F8C601EC7
+:1091B000DC2F674AAF85F62F8B81A4B87F99CCF757
+:1091C0002FB7283E17E96987C21A405EFE2AF216B9
+:1091D0004FEEF52C463DFDE4E93106DA47577CBDFC
+:1091E00018174FCA55683F28DAAC52BEF76287D9C4
+:1091F0008ECFF5EFFE5E9711E7F90B7360A8F67658
+:109200008779603F06F54299DC23635EBEDF0FBEBF
+:10921000388C9FB6D05782F1CE6DACB711E3EA42DD
+:10922000A4E310F47B55675FF479FB920EEE27956B
+:1092300044F0BA9FE980467CEFF43613F985D7CB2A
+:10924000DB177DC9C85F1A94AF6FE37A0606119FDA
+:10925000DC68DEBE107D3DE0E39FE8F40E1B267F58
+:10926000BFCDC4F773FC478C0CFD5E762E6EC8BC78
+:10927000CBF5F2F8BB3BC39D6A24EEBB71FF7C7754
+:1092800067B253CD197E7C4E9FBF18F395DBB6CCE9
+:1092900055284E14F9CF41FB223AFCED9058931516
+:1092A000F369ED8E528C3F86DBE728F63B69DE1BC7
+:1092B000C51B63CD9CCEA27EE9762163DBCE863BC7
+:1092C00091BFB79D4D76223CBB057F6AFCBEFBCCAF
+:1092D000E570DACF343955DC07F6475B1C2F13BF36
+:1092E000723E6F1931C68BFBADDB853C6C0BF71FF3
+:1092F000CC8A0BDECFE0FB179DF59EAA33E9B4DFE5
+:109300002D61BE51DB27F680BC505D4E0C237E32B2
+:10931000B21686EF6D74B29F633B7D9A1A85F8BED4
+:109320001CA7ED47AA519467F8F64A816BFC60BC14
+:10933000EFA877513D496BFDC22A05607CB3DE4D35
+:109340006D5BFD726AF7D4AFA6FB6B0F453E8E7660
+:10935000BFCEB9A04A09D21B9FC5F3FC526ED6E915
+:1093600012E473F60D6318EF4C7FA24F463D71FB7C
+:1093700055584748DD887219F14CF9CBB4403F5538
+:109380005A12867C79FB55E8078D97E2A3391D9A1E
+:1093900094A65B0A485A881FC2E29D17E3E0FA0FC1
+:1093A000ED2E7F5C3CF241F5BE0B8CFA97F1FA0E84
+:1093B000E96EF9028CCBF31551DE380FF3C6B934E0
+:1093C000ED62C4DFC42E13ED7B6BF9DB5C31AFF3D0
+:1093D000ABD03C729EC8DBBEC9FA289F9C6F81C08F
+:1093E000CA807071FA39A5F94912E6FBE24D0EAC5C
+:1093F000579898E6CAC37C6B573CA3FC695757C281
+:109400004815F0E054785ED7A9E575D9DFCFEB7643
+:109410007F1AE9217D057E0AEAA7EEA3910E1FEDD2
+:10942000FF59C8FFDB810F627D4338AF1760F3E659
+:10943000511EFD760B5F07D89FF878CAFBF9F61D21
+:1094400086E77E7B99F17DC4DE93B43F5D62C84CB4
+:10945000EC0338F74963A3B07DF1D3C86C6A8F463B
+:109460009E47FC741AAC2ABEF7C37A56857567CE40
+:10947000F76DB49F31FD7D9B82EDE1FA3EAA477BFB
+:10948000BFFE1CB547EAFDD41EADBF4AED3B701DC3
+:10949000F9E7103C8F6DEEE2087A6EC7A20813C29E
+:1094A000DB19C9B668EFC17A335FB8AF1593F9EF2E
+:1094B000C57FBECE7213D83BB37BBC3481B113F1F0
+:1094C0009FCF54A07F68C6A87FFF0BDCFFDD4F2E27
+:1094D000ACB3005CF38EDA5A7BA0FFE94F2EAEB33B
+:1094E000A19E3D140ECA0EF546FF41907496873634
+:1094F0003D9971053B19FAB1A2EFE99F590A245F22
+:1095000050D297C580B5A6FCC43FD302785C607585
+:10951000FF1BF64D9E976696DE847DE6C17A2EBFD0
+:1095200064A4F89E8D94E2B07E6599DD7D2C3EC8E2
+:109530007E3BA53FD2FE51815362D1714457DACFB1
+:1095400062F653B1C1F2B6CC5E760CE971473CDFEE
+:10955000BF9A384D7206D749E8C74D3CA396229D65
+:109560000ACE9537613BBB229AFAAE85939A509EFC
+:109570004B6DC33D5F42CF2F8837127F162B524869
+:109580007D887E5C1E3013FAC7FE03E1941798783D
+:10959000CCDD8875A36549A9B9B2D0798CFAD11B05
+:1095A000711F6D62E587A5B1283F36C981E6A180AC
+:1095B000F535C5C661FD231644E1BA9E2BC1FA9D5F
+:1095C00089AAE440B41539BB5AF1F9224784A308AB
+:1095D000FDF1636A299A9CA3CA84C3F9306E46BA26
+:1095E000ECB0C044477D774CBD00FDA28C28CAE397
+:1095F0001629ABAF1CA67E84A341C5756CFC792DE2
+:10960000CD63267BBE6356C97F20FF14BBA228E72B
+:10961000576A3B3537B82E0CD64D7017D9656F9801
+:1096200084FCFD83523BF4778C9218CACF515FE6DD
+:109630009FE97E77B81A0680EE30D94B71BE1D26A1
+:10964000C9BE96FAAE121CEF196354314F541EF77F
+:1096500045C8FC334AA5296710FEECA80978AD621D
+:10966000E4A590FB3D8BAC64272ADFCF267FA8675B
+:10967000510AD98BCAF7A71563DB63E07E7AE5FB55
+:10968000951574DFC0E3DFCAC5DF718A3EC5BB959F
+:109690008B5751BF4B4AFC777CDF95ECA85CCCA381
+:1096A000CD4CFF7AAE12ECFFADCE24F9CF1579BCCC
+:1096B0002243E6FA6900FFA307F83E4465B6145258
+:1096C00037372BFF54483DA86BDA1721FDB9A59712
+:1096D00042EA43E7557E1DD25F304FAA0A1E5F7AE9
+:1096E000209FEC6BBEA85FD2F24B458285DEA9CFEE
+:1096F000A82A05B93C00ED03A01F8A7A45DE55E192
+:10970000717506FC433D586AD3E577994AFBD91534
+:10971000DD7CDFBA3CCE783AD83E54C84F707F41EA
+:10972000B7FEDC0346B293B9D132E5AB34F82A4632
+:10973000863EAFF95F1502CE1D0677530CE5C79C38
+:10974000BDE87F68F06BEFD7E0AE90EF29A5EDBFE5
+:10975000EBC0AF87170025FF4D0FC78178118780B9
+:10976000BF41FE5937AF4B835FDC50765BF3CF2BA5
+:10977000414F4507EB299B1487F576C3E9296DDE38
+:10978000E1FC306DDE6576173DEFDCFAD9D1423968
+:10979000A89F7A2A3626B8FFDA67EB43EEC79FAA5E
+:1097A0008A0EEE6FFAAC0AEF4F57D4461BF0E34136
+:1097B00026393CC89F3DAA82FBCF25C79C4DD89631
+:1097C0009D746399299B71C6D384EDD4F3DE1E3357
+:1097D000ACEB8E0C59C5B85DF33FF4F09A13781CCE
+:1097E00072F0AA6AC5FDD31D1ED58AFEFB8E2754D2
+:1097F0002BFA1F3B9CAC02E331679A6135FAF3CE3A
+:109800002C5E677855E8E16FE2F9F35A7B5A717F75
+:10981000837A11EBC2D127A8FDDA4F75E007D1AFEB
+:10982000CA1EEC571D54BC367CDFC127BCB6E07D98
+:10983000C21BF5ABFE8C363A1EF96C4E887C9658EE
+:10984000EEAE0A96EF32FB9290FB9FC6A904FF8C06
+:10985000A48743C6DDA13E12D2077F3103FD9146A6
+:1098600013A33A598F81D7C9EAF1F8A8C0A3C366F8
+:1098700047378619E354AA6BD38F739470FCE9AF12
+:10988000A727F0B86823C80CB6F72470F8F475B1B0
+:10989000FA3EC47C0B713E983909F9DC61355C01F4
+:1098A0005797391392EEA47AD93CC3A369D0AF4E2F
+:1098B000C8E2FDA9869D581F7B774236EFDF6AC854
+:1098C00033821FF02B36FE4EAC07AF0D13759D0F84
+:1098D00024D27E9816DF2886532F2EC638738F9198
+:1098E00061FEFE1913D8BDDCC0BEB9D5CCE352ABC6
+:1098F00089D76D3F957AF429D41B6A987B7A02F94F
+:1099000051C52AE2EFBCDD42759D8FED2E4B44FA26
+:10991000DF93C0F35C593BA726A17EF917BC7F56A5
+:10992000C2C4E1DF8F75BE38CFF91D59E47F67DD12
+:109930000CE89502F887F098AE87419840E72598A3
+:109940003309F36C8DD1269AE79E04CE7F37DA0E69
+:10995000AAFB8D32ACDE0EEDFD82FE0FE07B095FCF
+:10996000FE51737063CEEE1F35773CEF237D653972
+:10997000D78F7EACFF3B11B4AFC246FA69FFE5E377
+:109980007BB21CE89F7E12CEF1B7D03BBAB14FC577
+:10999000FA0DEF4D582F9191E8AE453C2C327B6F7C
+:1099A00021FEB1AD8EC0F96FB41E78F07B2180042A
+:1099B000FA544FE1F4D1DE0B38B5A03DF8589C03C2
+:1099C000D1E080F7FF00F9408367000E5D5DB89637
+:1099D00067AEFBA381F20C7512E83DE8EF3CC91CB1
+:1099E0001E98E7A2E6AF8BBC266E45E17BA61C5E07
+:1099F0005A628336BF6D258F737B95903CD7A4E365
+:109A00008A7EBF83ECD654ED795D9E71AA886BA7E0
+:109A1000EAE2DA1713849D4966C9C1798035226E5E
+:109A2000B8DC333A0AFD4CD45132E0D5A4CA6C728A
+:109A30004C40CE5B21EE674171BFC667E38FD9EF23
+:109A400047B8C71F63F7915DD7E61DC82F70BC5C90
+:109A50003ECEF132A12FE3A7D3A06FEC3632AF1A7E
+:109A6000584F2107955DC6FFE078BBC98B75CB05C4
+:109A7000077E99E7834BE624035383F010A68633D1
+:109A800035482F5A336242FAB2866F61CFF3C4FC75
+:109A9000118EE49079F6C49477A37DCFB32D27FB84
+:109AA0001E357974C83CAC4709B1F3B028DABF9CC5
+:109AB0000840FD0CF05A704C09B1E793E23CB862E3
+:109AC00036F9A4A2B3FFCD32CA41E199D0EB0786A3
+:109AD000A3CB70F863393F45FFEE1FC55FB4331465
+:109AE0007FB115A1F88B7785E22F7161289E46B86A
+:109AF00043F192B27C5CC8FD9B56E786F46F7EBC56
+:109B000030647C2A18A4E07EDAD33343C6DFD23C2B
+:109B100037A43F76C3A290F199DEA521F7B35E5D2D
+:109B20007143F41EDFB226649C9EDEB7B6FDAF9093
+:109B300079357A7BE0DFBF82DEE6C4507AA70AFD82
+:109B40001AEDE4F565FD46DBD312E8234C13A15E64
+:109B50008B6E7FF76BCC43788A55AA9FF3CC64B4A5
+:109B60000FFD82EC92500FA5C0148634AA5FA7FAAD
+:109B7000BB1F1B0C21FBE28989DCBE2726F27CCDB2
+:109B8000CF4DFCDC520AF88F64870C2C102F031E7B
+:109B900022315EA678FAC7CF60BCDC14DD97A14203
+:109BA0007C6CC6FE4D017DB9C8AC36F6013E26C8B8
+:109BB0005C1F829E4C4B84F93F919E30723FC26382
+:109BC000443F22C5C23C91B9643F287F1CCDE224AA
+:109BD000ACC78F0AE869F51A106BDF8A2C3A07F5D3
+:109BE0001E4282FEAF2586ECE8DD9A7E5A9E49FA37
+:109BF000E9B22DD40FBBFC401A5D3F71AF99F6FB63
+:109C00004F883A446DFDE784DEFA53BD85DAF3F5FB
+:109C1000F6103DB67CE3FA08F41F4F64707F51BB29
+:109C20005E82789B88AD2CEC9AC58EF9AC7BC038EF
+:109C30004701BE5775F7452E62E43716E3BA6B3716
+:109C40005EB9F74DE8D719FC09DC3E7878BDCCC782
+:109C50008CFCCFEA6F5888FF343791C7E973C5FC95
+:109C60000BA0B1039E1600FEA3B17D775A39F227EF
+:109C70005CA7F369B3BB19D59FCC71A7D23EE35162
+:109C8000E6F8701780F89D4495E09CC75CB45FFFD0
+:109C9000D1BDAB2270DCC07CDA3CC028E86F7C1CF4
+:109CA000ED312660DC7F1BAF6F80F759F0BAEB9E79
+:109CB0009427D10E69EFFB88B92F7C88FBDDCC415E
+:109CC000F36AF3331613A29F762C5FF9692CBC6FED
+:109CD000CD0103E513D6749829EEEA5FF1D7AD2FD5
+:109CE000C2FDFB52FA6E42BBFCC98A6FC6203FDC44
+:109CF000BD01F410ACB130CAFD7062509C72E281BB
+:109D00002B11781FECEBA617D1386E36537DEF2759
+:109D10002B368F09F6471F4D2CAAC5E7D8E41B3B0D
+:109D20006F58F27A6622D563097E7A58F0D39AD7B3
+:109D3000C6921FB52662809F787F13AFEFD0D6F111
+:109D4000A1E0C715AF7F5D107CCE7407F0913A8615
+:109D5000EF6BA920533B7B2EE7E0FD57147713C22E
+:109D6000D779F57424F677BEF737829FCDBB31786B
+:109D700051063D0581FD65EDDCE5C2F6D83CA43B0E
+:109D8000C85933CEBFE837AF5DF81DE2A763F3A62D
+:109D9000EFE3981B3C7FC9847D71083C807DA1F86E
+:109DA000A09F85F3731D428F2AB8839E86E7991C76
+:109DB0002AF1B3931DC27D97C62E03C3BA9548DC22
+:109DC000B409CAB345CA06CD08392D49A09F855E9E
+:109DD0007925F1E49D4DE4E787FA3DF96FAF08F18D
+:109DE000775CF08FFC9D97DC8D9807BAAEDFE3338C
+:109DF0002C3145DDB8FF0381B0532A105B38F06B7E
+:109E00004B14FB22420F77A21C61FD3FCE85F97AED
+:109E10005F383F670CA602F5F80F604DF8B0294592
+:109E2000B4D2C50C0BE8C5BD897F78E669D093969E
+:109E300074BE5EEC37E2DFDD9CDF06FCABB7C7919A
+:109E40009E62DFC2DB100F225FA1A7533EC8078BC3
+:109E50000D9233F1BC6FFFDF22314FBB35467D1FC2
+:109E6000E9E03F20D33E4D98D2678A1E222E7B1315
+:109E7000F59E89FB4D546FDEC6F38116D5C9300EB1
+:109E800008B3DB27049FB36B17FA6ED5FE4F4699D4
+:109E9000800E170C3D91D9307FCDAE1D91E8C6DF05
+:109EA0006B747F8A7CB7F2C40705763ACFB671141B
+:109EB0009D03F08DA6BA83F10AF328B983E1A8DBEC
+:109EC000904BC6B8760325E3D9F8F6BC87501FD56A
+:109ED000F9F83A716E2CFCCB6C63D4BFD8D61883DA
+:109EE000F3D5FDB62319E567733C8F135FBF3A8E38
+:109EF0003FAF3005C77F99182DF8D96BC03863B3D1
+:109F0000884F2E5E35D038EDFDE3DB8A643BF043AD
+:109F1000B6AF792FC543ED6615E91AF60AE37868FE
+:109F20000F2339AFEB9CC1309FDF1FCD1C12DCDF4C
+:109F30001AEEFF039D33EB30AB981F0DB337B31808
+:109F4000987FABD80FCD048EC2F34ADA75ED7D61F0
+:109F5000ED3FC55802F981F2B4614A33BBCD168C8E
+:109F6000E708C2733CF2533CBEC767C0FC88FF16CB
+:109F7000C65E26B80270327AAF066726F9735B4D6B
+:109F8000FEB3787E05E0B223FD33198793B58F5574
+:109F900031BE0FB33B691D6176D5E19106C355977C
+:109FA000C3BC68BF7FBC960DC82BCA6F5D78A06F1D
+:109FB0000119D83A9A09F9B63F5B3A2DB80F8A646D
+:109FC00072E0F9711B629E6D1A49718347C638169B
+:109FD000DA88185CA7CACF3B636A2897E301F7C504
+:109FE000AD167E7F603CF0B70DFB363ECE1165B7F7
+:109FF000CE94484E28AF572BE4FD31C977F67690C2
+:10A00000D3BFF8F6E6A8004BCDBB7B884F571ADAD2
+:10A010005F1C0FF7375ADCF94980CFB74E1AE81C9E
+:10A02000E99F5E0BF35662FCB87B63827308F9D03C
+:10A03000CFFFC3E36B9F4F41FAEF9654CC9BF61BC7
+:10A04000FDA310DEDAF6CF4D548FD0768AEA938ED8
+:10A0500024B99DF89EC96D0DB46F3C8535D3BE7192
+:10A0600096387FDD92C4F5C7E563635E6E08C2FF74
+:10A070008349DC0F637EF7CD2837ED423E3BD12F7D
+:10A08000817697F08F7675DD9DA606E5FD1AD8DE00
+:10A0900014C4F75AF636B5DAF57E2F3FCF98F5910E
+:10A0A000E53E6710FFB993B89FE716EFF327B9179E
+:10A0B00024A1DC769D3645AA785EA56514DA911652
+:10A0C000F09FEC43E065406E757254A7F84D38BEC2
+:10A0D000EE1C3F770A746EC2FAFFCD1FB58D5B028E
+:10A0E000D77701AEB1DED373C24C758FBB8CAE1483
+:10A0F0001CDFF0E15739A8B72A1069F0BFAF3A5614
+:10A10000DE8C7803BE2F0E47F9DACE488F69F299BC
+:10A110008DF209CF6723DFE7633F93F4F056532FA7
+:10A120003FF7B98B9FFB04BE273900BEB7A39F90B2
+:10A130006D0739A0E7C7927C6FED35D0F9540FE871
+:10A14000F15BA85F5C85FDADBDA576926FCCC3E7E2
+:10A15000A29CFAF6D23C2D108320E924E60AF61FD1
+:10A16000DB1323898F35FD783091EBFF960C350A90
+:10A17000EBFFADB21C2217417690F7859DECDD50C8
+:10A18000FCEC0BD3D0DE09BB20FC27769CEBF94717
+:10A1900085AD5AF34EE1EC2DB0CE3587E5817A6E70
+:10A1A000F4577D824FF60AFF15ED849AC7EB67F0EE
+:10A1B000FAC40DBCCEB5C0B9BA04CB38265734EFBB
+:10A1C000C3B6D0D55282678EA72DECDDC7CF1EF364
+:10A1D000F3E3AD7BEFC8C27DEAFE136686FB24ADD8
+:10A1E0007FF3FFE175C0C3773B01FF43D825580ECD
+:10A1F000F11F58EA149634F87EBFA4E98FF9952828
+:10A200006F175BE5401FEC612D3038F67F9D54F5EC
+:10A21000AC07004B1BE17C1D59A230D94D6DFF915D
+:10A22000BF25A02DD8758CFB4DAD266716F24FEBE0
+:10A23000E8D0F3FA5AFB62123FE79C6F6643E625CB
+:10A240000F09BB37C6C39E413EAA6D95ED5EA0FBCC
+:10A250008556D96902FFE6ACD39D806765CE31CFC4
+:10A2600082A968E745DCA87D4F6519FA2760A71E1B
+:10A270007C61501EDF807CF450BBC47E066B5EFEAA
+:10A28000D2D0FB0A35629E87DB36EE4F013AAE78BC
+:10A2900025745C8DA813ABD1F92F8792447C98C6A6
+:10A2A000D2D02F01FE21BD605458B719F8F5C16412
+:10A2B0007707C61B9BC5770C407F921C7608BEDCD7
+:10A2C0002AEA04FC5B25DAD7CB7CD52B1BE0F942CC
+:10A2D000C52BA39D62D0E23EC164A7BB1CF10BEB72
+:10A2E0003E86FB35CB851E5CAEF9655EBE9F01E602
+:10A2F00096FCB229CCDB1889EB7E5572F854FC8EA3
+:10A30000C8A03A5C5A779D5877CD8623FB318C5B89
+:10A31000D5123AAE4EACBB4EB76E6D5FFBCF49BAAD
+:10A3200073C837B86FF16723F7133E10F368F7CDA2
+:10A3300023B83EAC05F0906E355ED9EBE57E9D0D01
+:10A34000BFC373BF80F77E41EF3AE633A5C0B8556F
+:10A350002FF075B26743EB3F1F6C7DC484F1959E6F
+:10A360002F966F31923F0A8833A1BFA8E78B156201
+:10A37000DD2B74EBAE754B3AB8B89F3C18AE960522
+:10A3800048D7555B8C0CEB11F5702D6B59528E7CB8
+:10A3900036985F395D5688F90270AEA6737C370A2D
+:10A3A000E7A811822FC7B17144978AD81BA28BDE10
+:10A3B0008FDDBE7F9C15E5FB72F7688ADF35BAEB4F
+:10A3C0009F2F177EF08C0D8CDA0B6D25D6F118A718
+:10A3D000F4181C924AF156E478C0475E87CC2AA153
+:10A3E000DFDF9EB6DE0378CF3D9C5F85F17CDE61CA
+:10A3F000039D77DBD99D4FFBC07907D263D3281F1C
+:10A40000EDA0EFCDC03C643FFB7B72D7E3B980FE8B
+:10A410009ED27C9C57827168E773851D68E8C9B538
+:10A42000069FEF2E18C1E3F5A7923EFB31FAE13308
+:10A43000B61BE97CC30CA3FF3DAC9FDAD9ADD0BEFF
+:10A4400075CDE1A56BC390AEAF49B46FBDBF774D7D
+:10A45000DC62E4AB76A31DF7A1FBDBFF6D2FDEF71B
+:10A460006C91E87B12751D65595BA19FBB31CF11C3
+:10A470007CDE2B375A25F8D8082BC5C3336E3292B1
+:10A480005D3C9F6CFD25FA372B9C1B498ECFEFD985
+:10A4900069A2FAB9AD1243D3BF3F69DF1B888FF3BE
+:10A4A0006F1E31A1935DD27AC4D4F777ECFD052FEE
+:10A4B00004FE1407379B304E59B551EBF799904E77
+:10A4C0002EE1FFD4BE728AFA2BDA24D2332B5E92AD
+:10A4D000E93CFBBE8EB74CC8C7B55B2496981A748E
+:10A4E0007F8314F21D84A58CF3C152A1675632EF0D
+:10A4F00053C9306E6533AF23604F87D6E5AEDC328B
+:10A5000087BEDBB4AC79687DF3B0E0EB87301EBC6E
+:10A5100015BF83143AEE61EDBB5C3A7E7E5CE3E7E7
+:10A520004C9689FCFC55911A950DD7BF3AB2E2E6DC
+:10A53000A1CEB1F7083BACD9C1CB3E03D911FDB8D0
+:10A540008B6D5708DEBA9ECB26B483E5ED9708EFF6
+:10A5500095ED5D54C7711773D7209EEE6AB7DA5137
+:10A560008E2BFBB85E9AD96EF67A25BCDFD284F4C6
+:10A57000ECEFE4758B9E3D12F92F9ABE7A48E0EF1E
+:10A580002181BF874041A7E4A21FCBE3DE8733369A
+:10A59000EE8F81FBB5E27ACD817D91E8EFCD6497B6
+:10A5A000EE457AC07B18BE87BD148AE73B1987E366
+:10A5B000CE2DBCDE596FAFFA4764CDA6FC23C49DF7
+:10A5C000084FCD96503CD7EAE2ED7523B87DDEA466
+:10A5D000C373A59F59B3110E5576786974AF82EF96
+:10A5E000EDCE9128BFDAADA6450DB5FFA8B5EF09B0
+:10A5F000BF59EBCF16E7AB5BECCDB6E038D894CCC7
+:10A60000EDFF8A29B207E934103FA4EFCB510D8149
+:10A61000F801E286DF8C88E771041674BC3B526651
+:10A62000717181F8E18749EB2B73A15FB785CBF995
+:10A63000C5C9301F7EDF4B61E45FD66D31D339C0B1
+:10A640003AA03BC509EDFC1C83AB5D2A437A83FF2E
+:10A65000FDEE888978AE8619E360DD73DA389FCF26
+:10A6600029BD447C72209DAFF7B2A2260EE58F6B08
+:10A670007E389EC35283CF3F805CE2F8DA765E0F6D
+:10A68000D4BAF7EB51A9A8D73AFE3A6A09B45746AB
+:10A69000F0F56B7E9E1FFCBCD1DCCF3986FEE783D4
+:10A6A0009ADCD8F93EDA83C2CE30A989F8BBD6D875
+:10A6B000F2760CFA4D5BF9BE3DDB6DC46F9CB18642
+:10A6C0000F5E6F8A81755F7C5DA27A347CFE09E043
+:10A6D000B38B4B5B4EA31FFDD5560BF98F0F828FAB
+:10A6E000383D77B03C6A72AB7D77AA81AD257F7229
+:10A6F0002D6BA27695E0E38B6D8D26CA9B79839EA8
+:10A700001F3DD8EF58A5E33B537228BF357C104E50
+:10A71000FE5FFF01D98EFB2780A7FF4E0EC687F094
+:10A720002F5AF786113DFB8FD8C85EFC49F0D979C6
+:10A7300091376E982CD3FA0D53789BD5F9D668A42F
+:10A740001FE21BEBDE3777BE358E9FA7F612DE5772
+:10A75000BE8A49F120385BAC94DBD3FA0D1F2CA2E2
+:10A76000EFF0D4ED19806B8C292E00D770FC2F49A7
+:10A770003C1E3448A1F160DD6ED9155CEF05EBB9E4
+:10A780000FF54F929003A6F813D02F1999AC92FDB4
+:10A790006A68E7F43474F016DEBF80E73B8CF4FEA1
+:10A7A00041F78B3D3578FFAB542BDF4FBEEAA9C490
+:10A7B000FE7747CB544FF9DD0F568C0DD69B0CE13D
+:10A7C000047AD619FD0914371E31107C75472E27DF
+:10A7D000A4DB501F6D2CB567A3DEE1FA6EFF68EBBA
+:10A7E00072E4630FBE373130CF6BC2DE325C6F1262
+:10A7F0007A152FF079C57AD7B2B9223EE67C942D2E
+:10A80000FC3D882B26264F1C1C57DCA83F09F6E090
+:10A81000E86209EB89140FC6B53B8F737DD0D0F188
+:10A82000D0A7C8E7759F98A9BEEABB9D0F8DA53A32
+:10A830005BB7FB56F42BBEEA7CF856CAF3496B09AA
+:10A840002E0FC29784FECB8709580FBAAAE3C30420
+:10A85000B2AFBB26AEF744A09F927B275E07BF81B5
+:10A86000F80FFC17E2BF9D3DF99ABF62C579571DED
+:10A87000505C889F5507F20F55A21F71B8381FD53D
+:10A88000B874389FFC953CF4576C01FF455B4F65ED
+:10A8900032AF77E9EF0AA33C81C44673FE61E92138
+:10A8A000FC53D3FA0ED9F59A3639A46E507BCE9D5F
+:10A8B000ACF07D7E8D7F5A2427F1C776DED6B4EDCD
+:10A8C000A4F5AD34B610BD1BB618F9FDADBCD5EA84
+:10A8D000AA3D2CC683F8388497800E334D5EFA6EFD
+:10A8E000C5C154EEBFEBE9F15932CF631C3CE1BE68
+:10A8F00019F9E560917BAC7D08FBE061C53C3E95B4
+:10A9000004BE5BF97925FDB853C93C8E8F8C0D3D93
+:10A910003F3A605F9239FFCC340DFD3DBD9F69F237
+:10A92000C4D83306E08BA39546FB3AE1B78F08FA0B
+:10A930005E42D55D46F20F8E32FB3B5867384BD3F3
+:10A94000AF93B95DD5F2DDAE0D2ADFD7197CAE919C
+:10A95000F4E47C6D3EFD7969E1D7CCD7F935EB3570
+:10A96000FD37868D41FDD722CEB9ADC90CF306E780
+:10A97000A3F4ED7EB18F81E775B06DC8FC98F23617
+:10A9800007BB4EBC41756627C2D8689E97A3FCF5ED
+:10A99000AA61F2D70D03F2382F84BF347A5C10DF3E
+:10A9A00055D1D3E30D81776D9F2D5CECB39D56DCC3
+:10A9B0006F24535DD67913FF8E9A9FE2AB864CEEDF
+:10A9C0001F5D2893685F1CE01C650ED2EB1746F0F4
+:10A9D000B8EABB0B24CA9B76E1788C9F5A24AAABB9
+:10A9E0005EE5EB35211F8D695DF224C9AB871D63E0
+:10A9F00041DFA9986DE17671806EDABA07EC568C6A
+:10AA000087EBE1386A713CDAC159C2EEE9CF218D9A
+:10AA100065BDE51857563B2507EEDBEBE93D77E1D1
+:10AA20008477E2FF013A9F4B761F21FDD67B7901A7
+:10AA3000E63F0F667E3E0AED65ED307CFB3BC1B71D
+:10AA4000DAF7591C63D546FC3EC98F12DD9F207E84
+:10AA5000FB0DDF468E63F87CDF7FAF91902E8CE894
+:10AA6000319C9C9C12F39D4A16DF258CE3FB24CB82
+:10AA7000B18FF26AF48EA4FC42F68DED4B35EC7E7C
+:10AA80003707F5D6C5AE0339A6203A9E5F03F28E8E
+:10AA9000F6A3635F826A0BE63303F1972469FCA691
+:10AAA00008BB18CA77E791EFB2B1FD30321DF5EE61
+:10AAB000F6A391B7E07CBB783BC09FED328D8378E5
+:10AAC00067CCFC8860F89E24F82EB4F07918EB1B54
+:10AAD00053353EF87EE3707C6B4CE1F584217CAB12
+:10AAE000ADB705BF8783FE7DA799BE8783F9E6E8EA
+:10AAF00020B9484DE1F230497CFF660AF3D0F700F7
+:10AB00002789EFE04C51984F89C17D2E9FCCF76586
+:10AB1000F9798602C1BF93145F17D6394C11FB3205
+:10AB200085AC97C64D677E6A9DCC4EE7148A9983A3
+:10AB3000DAC916DF9D9876C96E69A1FA3F5F821265
+:10AB40007DD622CE430C41B7C0FA15FAEE0DF1A521
+:10AB50008CE76186FE6E4A650A9773FA3807D2F76A
+:10AB600002A3FC147EDF0C5F325561155877749B8D
+:10AB7000C22CE100EFF6B70D24BF9D7DAA17EB4074
+:10AB80001DB1E2B92F18D5BB4E7272F944D382754C
+:10AB900012DA7AF5782884F9303F364981C892F084
+:10ABA000E8A3F7DDCEF8398D22A6D207566EC78FFF
+:10ABB00027935EF7539C54027112EA7583C543F8DC
+:10ABC00028C3E4CA44BEBF1109F314364BEC38EE77
+:10ABD00057A4F1F56AF3170223E0B9BD32B15E4C18
+:10ABE000811E8FE1FB1E9154385C6AE7DF094AA0A1
+:10ABF000EF04DD285EFB13F8772123EFF75FFC7E7F
+:10AC00007E60FFC781DF0D8A0C7C8FD281E74C30DC
+:10AC10007FE753CE07FBCD77A72CAD4E9918A897A9
+:10AC2000636EA6A25FA1AF9743F49D0B3ADFACD54C
+:10AC30007BBCEA9DABE2B9B98571163A4F9B6B19A3
+:10AC40009587762B23D15D9D42751F5B6EA14914BC
+:10AC5000EF44574480CFADCC3919F11CA8D7E3DFBE
+:10AC60004F1A38CF94C0E8FC9FD5CCEB199F01B99F
+:10AC7000C0EF178154A958D7C29E28A1FAC7A7A22E
+:10AC80002D0E3C87604678AD01781B2DA2EE47570C
+:10AC900077D96833D0F7381B59389DE79E15E6FE03
+:10ACA0001EAEFFB188623A2F9DB56D5A12F983B07E
+:10ACB000DE69DA7A0D83EB10B1FE0F9FD3D7FF69FF
+:10ACC000EBC2E3EBF85EBBC097B64EBB76DEC7A91E
+:10ACD000849CF7D1D6FF4C385FA71177E2D3E859AF
+:10ACE00015F5837E7D1A3FFC3FDDFB356D605C0012
+:10ACF00000000000000000001F8B080000000000A2
+:10AD0000000B7B2ACBC0F0A31E818565181826F1A5
+:10AD1000A18AD112CFE066607804C42C3C0C0C856B
+:10AD2000407B23807424101F01E2A340ACC2CBC03F
+:10AD3000100BC471403C07C89F0BC4A5409C05750F
+:10AD4000632B0B03433B107702713710EB3033302A
+:10AD5000E832136F7FBE0803C31309045F51126802
+:10AD6000A734FDFC3FD8F00A7DFADA276DC0C0B0E9
+:10AD7000D502C15703B2B759A0AAD96E81DF8C1D85
+:10AD800068F23BD1F8BBF0E83FAB87CAB7D540E5E6
+:10AD90004B693130782285899D067EB7A0E30AA0F1
+:10ADA000DE4A200600FB72DB43680300000000005F
+:10ADB00000000000000000001F8B080000000000E1
+:10ADC000000BE57D0B7854D5B5F03E731EF3C8CC6F
+:10ADD000641242483084092FA30D3821210D14DB61
+:10ADE0008140448A1AD42A54D4098F24E435011F9F
+:10ADF000176BDB0C04232060B058A2463B4150F097
+:10AE0000061D6890200107B034F4A206AFF5D1F614
+:10AE10007A8352400824E20BBDB6FE7BADBD4FE6FF
+:10AE20009C9319A07FFBFFB7FFFDE3D71EF639FB0C
+:10AE3000B1F67AEDB5D65E7B8F6C3213692821DFCF
+:10AE4000C2DF0F089926114206469EF6D7889BC49A
+:10AE500013529F4DCB4984A48D2041221032B986D4
+:10AE6000967309597B27099A3308D97FC484DF5721
+:10AE7000FA5899B60B99AEA1DF47B2F74F64D27674
+:10AE8000F4FD1317446C179841829B693981D0DE19
+:10AE900086133A840F9F933D0DD6D1B47ED39D2661
+:10AEA000627613F2381D868C27C441BC56429BAE95
+:10AEB0001CC1FA7B6C86E93951808FE19479B4BC6E
+:10AEC0006A4A49DE2A5A5A2D33B81A67973C17A0A6
+:10AED000FDBB4CC3711EB4DE13765AEFD1F74AC9DD
+:10AEE0002ADA6EC31C93509245EB352BB3825991ED
+:10AEF000F9ABCF3944E2ED0266533E3CBDFC195636
+:10AF0000E0F98B89261C674D0DC307ADA798520841
+:10AF100069ED3C60F1D1FED654B61E2DA4DF1F1999
+:10AF200061F2500C92473A0F58AFA4E307724D9E5E
+:10AF300091B4769A14165CF6C878E309057C1CADCA
+:10AF4000E7D96171DBFBD7A7FD4E8279AFA67817F1
+:10AF50003322EDC6029CB4DD1A4AB2101DF797B237
+:10AF6000E7308CFBCB1B12850089D4BB1E80847A12
+:10AF7000734C244CEB11A9D742E838AB26BE6519B7
+:10AF800049EBAF2A32C124C81A8FFADD6325D0DF1E
+:10AF9000D4518747005DAFA7DF611E598FCD8279FD
+:10AFA0003F3A452180FF5F0AB41E457163B1F24309
+:10AFB00080CF51435CF09E3EBDD1F0DA2658100E92
+:10AFC000B27A0321790440C0BF55DEE08A61C05FD8
+:10AFD000B9C403E5340F6D6FEFDFBE4B30235D1A4C
+:10AFE000E5402AE02F16FD46707CAECA5C6C057AFF
+:10AFF00010D29052349A90F580271854F2B9673ADB
+:10B0000022F557080C3FEB64E215E8FCE27295E08C
+:10B01000528A6753966B36CCD7EE53C875B4BC5280
+:10B0200008A48A4097D10AD9EC46BEB08EA4E53573
+:10B0300057257A80FFEA85508A04DF6FA0DF699781
+:10B04000078AC6CE06FE6CF228C8CF947F0E03BED8
+:10B05000D7F812C92A377EEFC4F6F6112E33628272
+:10B06000C243F13280F212E035FBA6FAEB87037D92
+:10B07000C6995C40A155C224F73C909F048B0BC637
+:10B0800097C7DD8CF49307260A4443EF9F03BD293D
+:10B090009ED6BA8B7E0ECFA7723F4C1849EBAFCE2F
+:10B0A0007EB911E8F4F4FD16A4DFD3E33A17815C0E
+:10B0B0003D7121E73D1FCAA5E2D94CFB7926FB442F
+:10B0C00006A1033E36EDC304C0DF90110DF7102733
+:10B0D0007DCEE8AD2563287CA4A1687E06F2897048
+:10B0E0000BC5EB90250A715B182DBF25F09D7843A9
+:10B0F00059AC6CA7F319C2E9DCDAF996A518FA9BEA
+:10B1000043C2A39CF8DE929C18D13343724938990C
+:10B11000F6FFC4824328E74F5F9DEC61729E82FC7C
+:10B1200092CEFB4983FA54BFA45848208E3E8774C0
+:10B13000F4DE0C700DC93C3107E0DCFFFA2101E8B8
+:10B14000F6CC986437E8A3045F27E9A2741F92F550
+:10B15000CE8350CF610FA6146561FDBF603B03FC39
+:10B160002D6EEF26C0DB36A1E630D027906DF23091
+:10B170007A333DB8FADEE420E89121B63FCD14875A
+:10B18000211F10924CE1731194937A216C190EEDEA
+:10B190001E60ED8692A000781E921958243AA1BE36
+:10B1A0004F2872F41FB7153422C807E574E0D7EDB5
+:10B1B0000A292F8A2207AF7279AE17C82CE46722BA
+:10B1C000FD15F8666802E31BB5FC0CC043C7DDFE45
+:10B1D0005AE20FB3283CBF5A322C5BA4F0AC857600
+:10B1E00051E4660D97035B07090814AFFB7FF73B3B
+:10B1F0002BE06DBB899441FD4999214B17A72BD0BA
+:10B20000630161FD37656DB4A0BE103291EF16E4A5
+:10B210002B5EEB1890BF65828FB64F7131BDECF09D
+:10B220002841D0CB8E948060A2F0B8B3886B6306BF
+:10B23000EB2E40F13717FE018C2EB1FAABD7240468
+:10B2400057D1EF73B3A8A001DE28AE4C74DCF984AB
+:10B25000CD73AEA77E11D08F902213E073958BD162
+:10B26000A709C6A153694A63FDACB98F0497011FB2
+:10B27000B958FB11D084D26D44EECBFF22D07ED3DF
+:10B28000783B907B68179712B498683B778D89203C
+:10B290007C52F8B000741F9DEC06789A523CFF3E39
+:10B2A00003E09F257936D2CF23000EDA4F538DC9A4
+:10B2B0008BFA225769063DBDCACBF4BC8AAF0C3E5F
+:10B2C0006E9A272CD0B9930CAA27114FDEB0D50562
+:10B2D000E52C064F462E9B571FFCA395E032DA382B
+:10B2E000CD1226504FC54309EFAF84CFC39E125CE9
+:10B2F0002101DCB90C6EBA2E233C69594A33C8418E
+:10B300005A0AEBCF4DF1A3E21DE0B2A970E5D2FAE3
+:10B31000A0873D4A33B0828DC35792C5E0D97FE400
+:10B32000AD0E81F5877265E3F0DAF8FC09C09BCCBD
+:10B33000F53AEDAF450E0B22AD1F1C47DC1BD9685B
+:10B340006E292FF2FDB11A8A075AB0F371C87A3309
+:10B35000CA037D15F896F2C1BC065ACE8CC8C7C880
+:10B3600015669DBCD8F9BC49039323CA366168971A
+:10B370004158D904653A8F924CBD9C118FA64CE17F
+:10B380007000BF53FDB374BCC2F8E72A66C710A2B1
+:10B39000A9077C3ECEFDEC6AFCAEE0BA9EFE5345AA
+:10B3A00007DF909AE4C922E8938E276F36015FDDAC
+:10B3B0004B4C623CF2B3D0A7BFE8783B1687AD3068
+:10B3C000495B475122E02DBD2671B20278ECF06155
+:10B3D000D9D651E3C5272C4D6309194C34E3648059
+:10B3E0007E7555B450BC921A2504FA7A9C164EFA12
+:10B3F0003DFDB5869940AF87171D4A05F94D36B416
+:10B400001F631A86723AE4355A0BC73FF133A8BF5F
+:10B4100092EB131B403C169FAFC173889DEA59AA5B
+:10B42000A7D3298295B1117DB1EAAA77B27D76CEF4
+:10B430003F89F80CC3D3A85734F5AFE2F503C245F2
+:10B44000EB9DC07A2A3CC6EFE70413EA2907D89996
+:10B4500014BF8F12D76C5C973D265C17E3F8FB9006
+:10B46000E7C064A4678878840CD0B77F356BF9E0B7
+:10B4700027F012F4AD14423951D26D681F52398E43
+:10B480008375AF49AA2983F7A1341B01BD7060EA17
+:10B490002101F099D6E61B0A72A8DAB9933DA114EE
+:10B4A00078FFC861DF95289F31EC46D54E34CEE752
+:10B4B0008A6B97A13E18EAEBED80F5DE5E2979AE46
+:10B4C00003FEF251B8ECA827DDE4BB147E4F6029DF
+:10B4D000E859B78F9607D167257F96B1EF2B6BCBD5
+:10B4E000728E4B917E578EA0F628D58BEB3BD75BA7
+:10B4F0006E003BA3C6E406BE5DE379CBE2B54379BB
+:10B50000F200C0736B916AF78505182FED6D2FDA85
+:10B5100079E35C8A0B94D6687338D5A5592F9AA61F
+:10B52000BE3316E020B75222A6C6A6239D2FF2599D
+:10B53000ACF504603169D691FD993B707D799D5CD5
+:10B54000857451D715751DC11EA97E99C7E5E811EF
+:10B5500077C822A0BEA2B24BE9338FEB113BD79B39
+:10B56000540F333DC7D793358B92713D51F527D892
+:10B57000D6A024E6717DBB26FBB9841B284C76D06F
+:10B58000B3A09752C864587F47829E01FD240504EA
+:10B5900018AF699C8BACC2754CAF4F47D6303DF8A5
+:10B5A000480A417EA2EB5033AC774D69A114E8A75D
+:10B5B000A9E680E0D3AC9FEA7AE7A8E924A007E7F0
+:10B5C000E6B2756E6E161BEF0F80A0710C5ED0ABED
+:10B5D000C675EF171377A0B28CE3F69611FF828938
+:10B5E000D9818FCE780BF1B866FE63F8240D1BB0BD
+:10B5F000BF140BA3C1CACC03F87EB5CF340DECEE5B
+:10B60000F552E78A1114FEF5D3E62A01FA7DB587D3
+:10B61000F95DAB26CE7D0ED635B3496170D594A1C8
+:10B62000BD1AC7E1DA007DA39FA8A05F74DF9D1B50
+:10B63000570CA3FDA4503F467043A5A0C54CBFDBEB
+:10B6400081A6A0BF7D6106BF874C2651E0FF0FC1D8
+:10B65000C6FC505F67C748A4A7C905F0C6797A2D14
+:10B66000E027BAA91FE67603BC6EEB6884D7E45ADC
+:10B67000EA8EB4FF3DF717EE82851FECFBD9EF4C45
+:10B6800003F95A7727F3CB8CF0DF3729D861C271E1
+:10B6900008BA758E18789D031A0CF48F27887039B4
+:10B6A00032195CC70546AF473B275F8F7E52117D3D
+:10B6B0004F3B7AAC739815E4DB68EF3D1DF74136DC
+:10B6C000DA3B8675E652E521067D3FDA1C9A8EFC50
+:10B6D000B6CD847A8A10A6E70462727F3B1C1611ED
+:10B6E0000617B21ED5DFCBE5F0ECF9B4FEF29D767D
+:10B6F00002F852F9218DF7B9AA86F24194797708B8
+:10B70000622CBA333B83D3BD13C61B7869FA5369E5
+:10B71000B682DD160AD60F2E07FFA386F9BBA1F06D
+:10B7200001D43F69536E433F654B73F2ECF9C05748
+:10B73000995E0FA0438507EC93687EE27493E5A2BF
+:10B74000FE7B2C3DDC58B91CFDDEC6CEE8F39F68BD
+:10B7500062FE7688EA494F56ECF1F34CCC8E4E30BF
+:10B7600071BE9B7A2845BB9EA9EBAABACE0E914822
+:10B7700040D4AC87B772FC19D74D22355846313EBC
+:10B7800047FFB1713E8B436C9868C2F88ACAE7B430
+:10B790005E0AE095CE03ED39CA8741B0E71E250D5C
+:10B7A000283701DA7E33E90FF79DC47459F39BC043
+:10B7B000E7D7371EF7AFEFE2FA6A5DF6FD56E88A83
+:10B7C0008E9702FCE177323D59E560766CC14E39C7
+:10B7D000FC030A4755B3807696699F15E13CB7890B
+:10B7E0009669D7618782F5CFBA2C58F69B3BD77EF6
+:10B7F0008F967B778A04EDC84C9B09F8F504E757D0
+:10B80000924BCB600F5B59B1AA79FF5DD05F599B1A
+:10B81000995869FF55BB4B6FFC1E2D9776C804AA3B
+:10B82000546D5EAA0CA6E585412104E59EC974A16C
+:10B8300002BC242A41F0DB7B9C9DC93FA2F33E5D04
+:10B840006B216E0A4A9DA333F9568A8FF2E0F642C5
+:10B850006857DE228046A4F3D87C2815E6B555F05B
+:10B86000807F5FB1254E670F9EA053F901FDBE9802
+:10B87000CE13E4B2943414C23A57B5799DE2D6C4DB
+:10B880001F4ED7BA701CB55CB5958E43DB55BF28EB
+:10B8900078608AD526E2033D746EB775D6B3769884
+:10B8A000DF52659403E6F5B002F54A83C52F5BDDF0
+:10B8B000005FB35248BF9737352B10DFF29BC9DDCD
+:10B8C000E0E7566C19A087AB5144795D9C60D908BC
+:10B8D000FA9CD8BD29378FEE4FE7D3B554C78E8A6F
+:10B8E00094CB411F221F0695999AFA43C504E4D7C9
+:10B8F0008A2DA2DECEE6EB7FE028A37F60AF03E3D4
+:10B900007E2AFD16737F59A5DFE2044E4FA9372F1B
+:10B910001A3C6B811E149E06C0177DAEE6F03927D7
+:10B9200092491077717A894B88C2D7C667834C8A4F
+:10B930008175FF75D9CC49522ABA0F8B20F2E45A8F
+:10B940003E7BD2145AFEBDA968B309F587C70D72B4
+:10B95000A4FAD9CF98985CD6A72A88BF86A979CFB0
+:10B96000B2F804C175AF616AC9736017D0F6DB4CD9
+:10B970002887B4FDE8D8ED5D85F9BAF6AEC232B5D8
+:10B98000FD4E6C6FB978FB86C209FAF10BCBD5F688
+:10B990007B117EFBC5E1775D37513FFE7595D8DEA3
+:10B9A0006F66F4EA4DB0A05DB3DCEAF14ACC8E0AD2
+:10B9B000C37B2971D446A827AAFC403ABD607FDB2F
+:10B9C0005B12C6AE225ABE98FC3AC0E1A0D2A2E5F4
+:10B9D0008BF87C9B8E1F13BC89BA32EDC975E23B94
+:10B9E000BC0C83382D088F3258417D3169B005E198
+:10B9F000BD7F9F15CBF74F60F0DE3FD88E72866B10
+:10BA00000BA5E3FD8AEF1AADDD0A2B138492DE103D
+:10BA10007D1F027E23EFDD26786F13490DEA673321
+:10BA2000417DF47046DEB3010D7E560CA1F4A5E510
+:10BA3000B360FF0C8CE0F5E1212529C59A71EA87F6
+:10BA400028B33666B1F7F3EC305E510FE0C1AFF4C6
+:10BA50008E02BBD2388E7958BE6E1C4B7A198EF38B
+:10BA6000B5611C737A99611CCBAC8DFC3D1FE71B43
+:10BA70009857AC711E1E36413F9FF4721CC72C1A9A
+:10BA8000E6935E6E18C7C6E643DFF371ACE2C5E627
+:10BA9000337CA27E3E432B719C2451D1C5ADCC4357
+:10BAA0002B0DE3D8711C780FE39034E6DF28E6DE37
+:10BAB00012A4FFAB5602F6B462F63D0FFD923F5A58
+:10BAC00009EA13371D7710E89544DC2FF80F53224D
+:10BAD000CEE70B1BA5BF5D4BE7806A17A0BDB38007
+:10BAE000834882F5E89F57731E9DDF32337D293CE2
+:10BAF000DB0A528AC1CF5EEFF040FCF45C5B81321E
+:10BB00002F8A5DB0A0413ED1A5E35FAEF72693CC6E
+:10BB10001AF0B3B81DA0964F50FD45A8DEFA90EA82
+:10BB20002F789E94A99EA6EF8F53FD46142DBC4BF3
+:10BB3000B1DD0989E1F144135B47BE587754C6383B
+:10BB40005F80BC9D49E7711B9FC6828638E62B70DB
+:10BB500038FC9C1EBDBBCDC18D480FEF1560F79022
+:10BB6000C6011457BCDE30C0171597442C5E01F691
+:10BB7000D18F576CFF0D547B47281EB298CE775655
+:10BB8000EB3AF90A5A3E2777DDE5B16BFA99257F42
+:10BB900008F3B6D0FFA09FD93E5AD68C7F4799BEF6
+:10BBA0007C279122654AB7A9E2304E0F3EAE3B2872
+:10BBB00003BD6E4B66F0DC09CFB1F0D985F4BACB8A
+:10BBC000C5DAAAF0F81F944918D7A3AE81CCB81DE6
+:10BBD00088F57CEABA6280EF2ED9E22DA2F4BCEBA4
+:10BBE0000111F16884B76B5F9CD744FDAAAEC64FC4
+:10BBF00065F02F2F05FFDD4BF4DF49808DA7E2555F
+:10BC0000E583DB674D1A705C536FB6EFFA01C735F9
+:10BC1000FC7247D94C5DF9CE9AD9BAFA772F29D65A
+:10BC20007D2F0E2CD47D9FB76291AEBCA0E1015D4B
+:10BC3000FDD2C6A5BAEF0B832B75DF2BB6ACD3951F
+:10BC4000AB424FE8EAFBDB9A75DF4DFBAEBA09E485
+:10BC5000B1EEF72201FBEC73FB89B5605F7D6E9757
+:10BC6000D0AFAA065EA37278AA3605F9FB74AD1BA5
+:10BC70009FE7DA72707FCC6FA3F24CD7FA0D75870D
+:10BC800097AE98087A84D6A73AFCA9BA379706A83F
+:10BC9000EFBE1182D494EFC546858407801F93D8E8
+:10BCA000C7D7BDA2E67BD725BE37D2052BA7FF7726
+:10BCB000B12BFAFB1EA17714D87781F7CDB87F138B
+:10BCC000CB7EA07F579028FE83FAEC86F88646EF5D
+:10BCD000BC2A32BBFA1A71F2AB227D562A4CDE2BFB
+:10BCE00077A44E867841A5121E5513C5CEEE1B2FA4
+:10BCF00044811904FD30795918BC2222BF48BFE1A4
+:10BD00003AB9BFC1E4DB07FAB97BBFC8F607C2077F
+:10BD1000D3619FE61AD1FB2ABC276D03717D7CA7F6
+:10BD2000D63BE0F80842DEAB9D86CF3FD4160D80AF
+:10BD3000F8D19F6A6761F9835A1F3EBB6ACBF0F95D
+:10BD4000616D0D7E3F5EBB04CB276A03F83C55BB9B
+:10BD5000029FA76B1BF07B776D2396CFD506F1A9C9
+:10BD6000CA816A8F92246EFF717B9DAE1C583ECFB4
+:10BD7000E720D27F77A25C7B5240AECFDBBF1805B5
+:10BD800076EEF9F7CC18448F852723BFC5A69F17F9
+:10BD9000D7FB9220A57F4EFFEF561BA38FD544A65D
+:10BDA000817FB672A44220AE6E7BF53B682FD3F73D
+:10BDB00012417D19F468F711FBFA87390FBA349DE7
+:10BDC000D4FA279EFCAFBCB959401F465FDB41B196
+:10BDD00086D1ED590FD04D833F6697EDE4FADC80B4
+:10BDE0004789CB9D119F6707AAF8EC4C87784B9544
+:10BDF000586492E8BBF3AD669CD7F9F638B68FED80
+:10BE00004ABAAC785EC516AB4BAB1FAA42092EBD31
+:10BE1000BE487569F5C5F98E679D20F78B534CAE0A
+:10BE2000E339C01F5ECE1F8CEFD4FEAB42192EBB90
+:10BE3000AE1F7DF97C83308DED2BBAE36F8DE21F51
+:10BE4000A8CFC5298AEB38D50BA7B70C8F8771A966
+:10BE50001FE78271BA6B5D2E366E8A4BCB97954B7E
+:10BE60006C585F852F56BFFF68F860C7EF230B8BB8
+:10BE700035419C2656FD98F4903E53C03F20EDF28C
+:10BE800017B0EED832D57547C2B2DAAF3F2406CC30
+:10BE9000D7C0FB16DD78B49D5BF5A1A15D6CBA4BF4
+:10BEA000E4844A4FAA27AFE3F921949991CE3EDA70
+:10BEB000633CEDAF47B2AF80386F86E4467DE787DD
+:10BEC00081283F5559BA149F1BD1DD8971CF7C550C
+:10BED000EEDDB7FF91B2DCC7FF26633C837C437B7A
+:10BEE000A7DF65FE753E2972829331B7B56206E819
+:10BEF000C98F4DAA3DD09007F33E4B4CB89F7F961B
+:10BF0000BCE5CCD1D86565128F4FAE60EB7380FE77
+:10BF100007F3A3769A6EBD2E6DD4974BC8CDC9207A
+:10BF20000F25EB65D8B1250B61BDD7EC9BCC925C9E
+:10BF300038EF5252530F76CA2A99EDA3CE7511E904
+:10BF40000A0A57D5AEA7F3C09EF54B4CDFABFEF304
+:10BF5000C2440677795250F1D2EF1FB5E6DCF63DC8
+:10BF600002ED83F5A0D7020EE289168F99B7420F32
+:10BF7000DFA5E037C24BC8321D1C6ABF2A1CE2167F
+:10BF8000216A9EC6CF2481C775987CAC91F4F6EBEC
+:10BF9000631C0F6A7983A1DC64A8AFF289CCF92411
+:10BFA00043F23D06FAA7CAD25B88761AA1FC911526
+:10BFB000A9A744EA6DB8583D33D413B15E93342E2B
+:10BFC000763D6BA4BFE668FD55EDDAF67280F2535C
+:10BFD000F94B8F3B21E8FBB1D4900CF1AFCACD0FE8
+:10BFE00039014FA7A48013E8FD71508C1A177CB754
+:10BFF0000F5F5EBB007E04B236C5FB0B8FDC08FA18
+:10C00000FA8BCD32E6C5F8B798C366CAC7D5AD0B73
+:10C010006740FC9E968FB1F2C39FC0BEA1BF4D4F3B
+:10C02000CFF2E71F4F863811C524B3B74918ED8EFC
+:10C03000EA4D7F2E043DEE27BDC887C67630FE85CB
+:10C040004494FB6225BEFF77355FC1CFE5CCDFFAB4
+:10C05000C8279097E037F04F59DF7AD2A5401CA14E
+:10C06000437224A15FFE5DF25DD0032A3E4890D961
+:10C0700013755B378C3946E1E9DEF46F4E41E777A3
+:10C08000333E3C1F9AF7AB57DCB1F5CC39EE0F4588
+:10C09000DA05B19DBB8DD93FA49D3D2BE5B013ECD6
+:10C0A000CDCA66D9433994546E7BF6B927C14F7B0C
+:10C0B000DF8C7E5AC5B6DFBC3381962BB6CB4933B5
+:10C0C000D874EC4272842E7EFABF2563237428FF55
+:10C0D000F56F14F768F6FEA789117A546CDFAF90FC
+:10C0E000D1FDF15710DAAF74D9A3D02574AC10ECA0
+:10C0F00095BAAD5F2AE0777DBC4F208332FAB72F27
+:10C100006BFE0DAE878027A423A7531FDDFAD12B2A
+:10C110007CE32BB958CF057A3216BD5EE07AB96A56
+:10C1200097832440FCF30FE6E00CA0E38BF7386123
+:10C130001E27A51AC6D74F3F940CFB7F657220D9E6
+:10C14000854FF6BEEC99FB90DF4A859A64B68FE97D
+:10C150004DE5F1F25498DF82A61FE1FC4A880FF901
+:10C16000AEEC69B108E2C39F4B64DAF628727183C2
+:10C17000CCF69F4E6E3443921F3909763ED8D76F66
+:10C18000891867256411EE83DDA7C671C9622C7F0B
+:10C19000CEF7A546C826D53FB4E8F875D3C39D4071
+:10C1A0009FD343BC83004E8A8700C79700FBFDE204
+:10C1B000D1A983187D58BE01B6A3FABF00DE43FDA6
+:10C1C0004E19F70935EDB8BE64E3DFCBC7A770DBC6
+:10C1D000603D3B99CCF62B8DF35BC2E747FF3A8974
+:10C1E00086BF34F2CDE47DD34A26DFAABC07674E72
+:10C1F00083EF9FBDCDE407DAC1FA41E10A0FC2EF38
+:10C20000FB6F15501F9849389A5C6F92B95CEBBF71
+:10C21000FBA99C425C80C22D413E43844F68FF894C
+:10C22000887FF44B4AD6D3761AFBCC0FE3613D25C9
+:10C23000F25EB37E94723D304DD6CB3F691A785989
+:10C24000F662A54C02605A56BE6F46BFBB729B5C3D
+:10C2500004F33ED372F09D1F53BE3E1352E554AF1C
+:10C260003F8D725AB663B300FC6994D3336574B5DD
+:10C270008E26A7F47D54392DEBFABFA23F55BCF9A9
+:10C280000D78A37A7068822936FE8C7AD021BBA300
+:10C29000EA41FAF736C9EBCF772ABFA97C462DB41D
+:10C2A000A1A0BFFBF851E5B73E7E54F9CD384F3D14
+:10C2B000DE8CDF2780A146E12ADA2DA35F52D9CE9A
+:10C2C000F66F68BB4357E4227EBCB87C9186435727
+:10C2D0002469CB41433964A8EF35948B0CF57D86F6
+:10C2E000728DAE7E65DB418525198575F5CC4B9E3B
+:10C2F000241F45B1EFD575C6DFFA8912007E48EBE1
+:10C300005540CFC9CBA86906F1B3BD22FA5B3DEE1B
+:10C310005E67227DFF9095F9B13D2E5E4E60E5DEB1
+:10C32000814A3DE839F57DAF95C5397B8A7A9D090B
+:10C330001AFFFE58BBE884FDE0AE20CB47ED0F4F5F
+:10C340001DCA4D1789F59DC505A78AF6F425E0BFDE
+:10C3500035881E700DE72FBDDD09FB6E3DEDC36F07
+:10C360009A45DF2F382C82F94C7A6CCE31001709B0
+:10C3700078A5D43C9E3F41FF4E91C02F2742DE441A
+:10C380003BB3AFE7AF36D8C3F67B15CC2F5BAF8995
+:10C390006B69F8BF9CF753D6A4FF5E4E5623FF95FA
+:10C3A0001BE4C1C7FD81A3AA3C64936CB6BF4D9842
+:10C3B0001FCBF5EE5431EBA65914EF3D1D22E6CD0F
+:10C3C0009E6F17493DCCB345C07D4E1218887255FB
+:10C3D0004D7A51DFA978E906B95162EBA3EE9DFFD2
+:10C3E00091F720F0C7CB7F1CF3147D76BFFCFEA82D
+:10C3F0003D50DEF56EFA1F49FFFA05FBBEC27DC453
+:10C400009E7D668C73F5ECFB6DFA83507EC58C7156
+:10C41000AE9E6566DC4709EC730447C2F721CC1F6A
+:10C42000A8DBFBE5189627B91CE9F48DCCFC91F349
+:10C43000EDFFF501E48F9C6FA7B302BB605F1CCAE0
+:10C440008DFF152BFADF3D7BBFCCF3D9FF71F3A92C
+:10C4500056880FF9CF4166ED007E4D60F160FF9E7A
+:10C46000F1CF427E7355EB7E05E2EC05AFFE650C25
+:10C47000E8C99E1DCCDE3927773D03FB6166E59355
+:10C480006532C5F339109EC1843CAB8C2D086445E0
+:10C49000C30BC3430FC503CC8BE2A50CF47B2C7CF0
+:10C4A000A42BFFACF8F8E42EA6C7BE8B79F611BC1E
+:10C4B000085EF6DE11B408387FF67EDF976340CF62
+:10C4C0009C092D457BE452F3BE5661FB2CFF73E6BD
+:10C4D0002D842F67DE73FE69E9CDF8FF43585F07AF
+:10C4E000F69783FE7CBEEB7E2CBFE8F020BC97293C
+:10C4F000FF3FFD9F46F71D94EECE4BD3FDA97FDA9B
+:10C50000795F8AEE8739DD1D2ED85FEED9FB178C57
+:10C510009BAAF3BFD4BC5FF97F74DEAABD3EDD5495
+:10C52000736426AD7F8484D71751385F4B9BFAF62E
+:10C530004CFAF5B731EC91D30A8B7FFC96B03CC135
+:10C54000408AC0F23CB85F5440D8BA5E90598A76AF
+:10C550004641E623681F10A9E64836C5C7F4F4052E
+:10C560001E960F3616CFA15C977AAD07E38106FFC2
+:10C57000F0A040BC900F5D70F5F51DE0AF4C499305
+:10C58000C3E631F83C06CF43CE69ECBD5DEF17CD75
+:10C5900000BF46E3E75DEFD67F2FE4FD4D238B8F91
+:10C5A000CCA4E34F4B135D416837A94182F9CCA07D
+:10C5B000C2DDA0D90F2A34F47708FC5A4DBCEC6FC9
+:10C5C000C55F9A99F991BFA5E36703FED2648C0712
+:10C5D0005E127F84E57F5D979A8DE75188E441FC88
+:10C5E0004D1F5CC5F1C9FC6689B797ECF59D20B776
+:10C5F00012A17E2FB3CBD05F56FDDE587826DC8F9C
+:10C6000096F8902ADEA53419F35535FD213E547A6B
+:10C61000FCAD7450E9F7F7D2E39C811E699FB92401
+:10C6200090CF026EFF4FF9AC53C4729A47C2FD28F7
+:10C630006EFF4FB2274860FF5F2B1D15412E4B2D1B
+:10C640006DD3214E6FF108C8D757769BD0BFB1E4A8
+:10C650000A88F7CC4609CB474DAE716068DFF8BD5C
+:10C660005D671E20101FF62A68789322169FFFE64A
+:10C67000DB6F27AAE735F03B213750FCCE6F2261F4
+:10C680001B9DE7028904E21321BE2B900F75F15D1B
+:10C690007D19FEBE9F1CE9E752F563E9917FF473B3
+:10C6A00017D55B1F52E6D80D4FDC57A12CA1F18F97
+:10C6B000BFDBCEF0E53F4282C3502F78C522CDBE0E
+:10C6C000D92366A63F76FD69470EC4C526F564C525
+:10C6D000337D3A02FD023FF70BCE13773CE41F9CFB
+:10C6E0006F1F1E8FFB821DA2C317252EB395FBCF94
+:10C6F000FF0AF914F4D9B38934C0398C1ED28BF1F6
+:10C70000D8C0264BD4FDDDFBCD6ABC89D38DFE8914
+:10C71000EA792337E68B04E2B574EB9EF1B134A6D7
+:10C720003F1DE0EF43CD7EC9DF8B5FF0D701BF5BDC
+:10C73000AD5D85D1CE83ADE0F8BBF1C05718C7BC65
+:10C74000BABDD904FC7BF526936EBF3160E67ED777
+:10C75000583216E0BAF180D5910B74E9103D903F44
+:10C76000E86FFF44F145D9B732E213FA87B8F83ED3
+:10C77000338BF3EF9143F300AF7BCE5A303F67B773
+:10C78000D250110DCE2BAD4CCF2D20A17BC664FC19
+:10C79000F3E177528F3D3C19FCCC4D84C7318CFCC2
+:10C7A00047908FCF6F21783E14FC52D00BE75BD8B7
+:10C7B00039608A9235E04F5379FF81362E7365DBFD
+:10C7C000F67F053BA0BA5D7041EA6CB5D4A540BCCC
+:10C7D000D5DF9620C2BA9BED56F32A5DA36FD5C86C
+:10C7E000C53E33CB373E3861CF1D30EEA7DD0A01A1
+:10C7F0007BC4FB5AAF13D6ED4FDB73E2A3E5CDABA1
+:10C80000CF5FD792E95324E88720DE8DFC90D56274
+:10C81000D395BF27FA06837CDD68EEBAD713857EF1
+:10C820003E0BE3B3CBD66FC1FFCFF4DBDBAA7EF3C5
+:10C8300089451A39CAB4F4D36F83A2E9B7C5827B9C
+:10C8400010E07DF1DEE18380AE8B0FCB03A3E9B76F
+:10C850006DB56C3FEF259E0FDBD34AF5DB351AFD36
+:10C86000D66AC1BC3863BB448B89AF8B97D06FC18C
+:10C87000FF1EF9DB06FA2DCA7C475A98DE50F5DB1D
+:10C8800098F663A8DFC6B49A7479A369964BE93722
+:10C8900061E0AD600F77C89EB828FCB38DDBDF2F59
+:10C8A000F13C3C1807F4DC1D16B6BF79B97A2ECBE3
+:10C8B000CAE87D493DF7DF846755CF2DDEA99E7319
+:10C8C00034F221D3738B77533D27003F323DB77845
+:10C8D0002FBBC7C1A8DF32FBE93782F5ABC3ACBDC4
+:10C8E000BF2D63C31CDADF58AFECB1D0FA6323FA73
+:10C8F0006E9C56DFDD6161F72EF4D3771D97A7EFAD
+:10C9000076727D47F5D830D0AF46FEF0B4EBF38EAB
+:10C91000F78C3FD9F26B9097D745DC373CCACFA54F
+:10C92000BD31FE642EF0578B85E9DF3ACE7FE76A92
+:10C9300003D87FC16B6C7E5576968F5CDDCAECC3E5
+:10C94000EA1621E8A6FF2C9CF09502F02FDC2B9034
+:10C9500041B43CD3CCEA93E7D57D2F32235BC30FA0
+:10C96000F3F32B306E3F5F221688CB57D80B3F86F0
+:10C97000787C453E8BE357F0F70B0F77D5433C7B34
+:10C98000E11302EE7B129E0FA0E63796B62FC57814
+:10C99000AD312F40D5E70B83FAF715867CC6663E8E
+:10C9A000CF996217E285BC2946CD4B6836E2A38356
+:10C9B000E3639388EB661F3E287EDC19FDF1412975
+:10C9C0003A233B3932FF85AFD379E546E6A5E2C38A
+:10C9D000383F35EE5CC1DBC59AAF8ABF7EF355F1B7
+:10C9E0006998F7B3A037402164931CC88BA17C8061
+:10C9F0007A23F03B11CFEF174D1A3948AB87B77246
+:10CA00007D9ED330A9209500BE480DF04D49E3A28C
+:10CA100043A974DEE3DE738F85E5F17B13CC3ED84A
+:10CA20001FDD6AED45BDA6F2D5D79CAFDEE178DC0F
+:10CA300033B806CFA9FADB0417D815FEB015F1E715
+:10CA4000A7F883F32B7E7E7ED14FF90BE4E9E01348
+:10CA50005F307CED15DC101F2F54D71FC03FAD9FFA
+:10CA6000D3CEF0EF0F0A88FF5CD28BFB23D58D82EB
+:10CA7000274CEB57B72DC2BC0755DFD23FBB961EE4
+:10CA80001A7E94A2F12356D2AC7F15BCDE8DE686C9
+:10CA900077803F6F7C5E26CD1AFECCA4FF7D1B8580
+:10CAA0004E2A3E2FC59717389EB6011EED80AF5E09
+:10CAB000663F85BFC27334EA77BF14D0E1B1E0C9E5
+:10CAC0000B17C5D338154FC0A7A0A7DA8B452897F9
+:10CAD000B409644046FF79C2FEA4566E17EE3DC607
+:10CAE000FA7F5AC07B4B8C7CABCEBB1FDFC6E057B6
+:10CAF0003897067ED1E5F2EDD706BE7DC3DA7B24FA
+:10CB000007F876AFC0E207ED09BAFDC5C156B6FE1B
+:10CB10006FB552FE867DADC3B267A3BBBF7CC7F1C4
+:10CB2000F50BEC7EEDB9A4AB602290F7B8C5827925
+:10CB30006408C73066576AF5EA362B19786B6EECD5
+:10CB4000FE5379FFB1EC1AB53C1AC6837CAF363A76
+:10CB50005E66643CA35E57FDFC4BCD6BD4DF39AF02
+:10CB6000BE3C4CD289FB4E1992EF51B3260FEE36E4
+:10CB70009E67442140FB4A532FCB72917A24C5858E
+:10CB8000E79FEE71A97CC6F2DD8B781EFB5471E243
+:10CB9000BBB07E7EEA65FB7CB926F2FB89A09F27AD
+:10CBA000CB788EEFD32332C66B3F9DC2F2386F7ABB
+:10CBB000FDA004719A9B4039517CDC344E407F05C6
+:10CBC0008E61C1BED92E6ADF7847E17C72E01C57C6
+:10CBD000F6A68602387F3C764BB00E9E9E82DEA47F
+:10CBE00037008F93440278ECF40E2880FB93EEF923
+:10CBF00033C1FB43E83A8BEDC7769081506F827763
+:10CC000020BA03E35BD717407C74E641BB1DEE6797
+:10CC1000C96C32519F2182BF09245807FBEDE38F75
+:10CC20007B6F0178CBA8BD0071E7B2F6E63A279496
+:10CC30009B048F9BF6EF0FF80A9D741EDB1A3F29A9
+:10CC4000FC0EC823AD07DDF89B583DFF26B87808D9
+:10CC5000DEAFC33C9B924D021EFCDA16148885F5AC
+:10CC60001BB4D07EB735D1F6B9B04ED0F6D0EFA612
+:10CC70004FDEBE05E4FD88C8DAB7B07DEA12DACE31
+:10CC80000D7CBB6911F6B7B0492029B4BFB216B606
+:10CC90000E941D913DF0BD75FF13B88ECDA0E3A598
+:10CCA0006680DE0F4F8132C9115C18EFAC1C8574B1
+:10CCB000EBE1724E268E64FA43E065EE37A876D338
+:10CCC0003B5696EF5BE259AA0CA0FDBC913F3003A6
+:10CCD000D202FC6D9FE0FEF3718A671FEDF228CF50
+:10CCE000DB3898FF91D2A559873EB5B2FBADE6B7C8
+:10CCF0004DC27C8605A408F3196E1CCFECB537AF86
+:10CD0000B506E18A8337E5DE34787FF05A33DABF3F
+:10CD1000E7B6C9C847E78674617CFA64938CE786F6
+:10CD2000EB9AD8FD5C275BD83A2E3ECDF6F54B1D2D
+:10CD30000A960F36DD5208EBDBC94DECBC63C1D35C
+:10CD400053152897360B1E767F11D38FAAFF56E214
+:10CD500062F908AAFEABE2F3EE97B768D07755EA1E
+:10CD60007A63D07755B0AFEC84A7FEBD9FD8991EEB
+:10CD700004BB1FE81EFE0AF9B7FA884CC0EE173E46
+:10CD8000EA2EC47CACBD02C6F3C7B70B5ED8D72F62
+:10CD90007BCF1C447B35587CF74F408FBF6F26827A
+:10CDA0001BF2DA29DEA97EC837F7FEE917F4FDC7C2
+:10CDB000472D900943F9A418F1ACE67FE66E667939
+:10CDC0002CB947D727C3794B326500EADBD24691AD
+:10CDD000F8347AE363C17BCB8F995EC6FB2954FAA2
+:10CDE000E52A0D25B08E0DB731BDE4DE2C438E084B
+:10CDF00039CCE324D49EC6F3B70B77AF4B5668BD4E
+:10CE00007A9EFFB170EFBA6491BEAF83F58BD65FA7
+:10CE1000A8B0FE17EE135CCD9AFED5F66A7F6A3F86
+:10CE2000CA6E7D3FC3F7F2F265F6A3C2A18E1FCB97
+:10CE30001ECFFFF70BEBE1BE98FC37454C3ACEFF17
+:10CE400068C670ED7E87FA54E3AF796F9B8857838D
+:10CE5000B7FC3FD98857C317ADE3A87C53BADDD0E0
+:10CE600026040194D671C794AA5C2CBB409EAB7972
+:10CE70009CB67A0ADBB76ACD3EBA1CE47B46AE802C
+:10CE80007C40023E654012DA416ED85F28CD65EDE8
+:10CE90004B697B90BBD627981C527DE0067D51DD07
+:10CEA000B4AE10EB6F12DCD07F6B7331AEF765F967
+:10CEB00022C1EF9B8EA1FD51D6762C09E495CAE7DD
+:10CEC0007A587FAB279AF13E2F55EE54397E53E6C0
+:10CED000F735595CA321AFFF41002A8AFC8A470835
+:10CEE000F3535B6494337F3E93CB37B78928CF07E6
+:10CEF000AFBD1DE5F0DC6621861C1728702EF96495
+:10CF0000907DEF93E3AD029763A61F4EDA995C170D
+:10CF1000C07790E39D02F707993D689463552E2FE3
+:10CF200025BF155B0CF21C436E3BA5AE5B61DC7B41
+:10CF3000AEB522DC05DFDFFDCE3DA87F64CCFB284B
+:10CF4000F8FE03C9A0EF4A2496AFA4E2B14A62F901
+:10CF50006CFDE058BF5449BD2C78F4703C657544B5
+:10CF6000F487087CCEEEE10A6C9291CF8D72F8F7CF
+:10CF7000CACF3F4A9E0F73FE51E111F7B2F6903FC0
+:10CF800016A678FA6DCBB398A77AF6856337029E1A
+:10CF90002BF650BEA5F33DD7E2E0F7BD04719D2905
+:10CFA0006F15310F9C48E1BC5B1C5AB96479481578
+:10CFB0002F39903FCA77B07CD2F2973F1A837922FB
+:10CFC000CB7A31BF2AF002B737035D6380AFCB2540
+:10CFD000960F6594F35B6DCCFEECDE1D370BE621FE
+:10CFE0006C61E7F4CB43B7CBC0876ABD1FDA64B589
+:10CFF0001EEE5F0628DFC2FE3AC0A73D77AEE641CF
+:10D00000756F65725FDE26A3BF54BEA519E3D8FE17
+:10D010002D9F609E7BC14BDB307EE06F13F5798FD7
+:10D020005B44DCC7A24FDCAF32E61F56B756E17E49
+:10D030005B7588E7F719F2DF2A5EDAFB7280A2A639
+:10D04000E2D7CF3B410F9CEEDCEC047CD2FE306F8C
+:10D05000F0FB9F49BABCA8D8F9BD5E7D3E6168650A
+:10D06000D47CC2D3F00FCAE00FD838BFAA79985B3E
+:10D0700006F03CED705E5194F87DDFB99D6D9F3FE9
+:10D080000379EEDD3BCE3C037057FEF5D367209F5E
+:10D0900089ECB3E2BAE47FE1F79827ACB6FB858D63
+:10D0A000FBF95B9FC7FCEA73EF9BD1CF39B7F764FD
+:10D0B0003AE4AF9DDBFE5532C4E3EEDD3B15E3956C
+:10D0C000F7EE2C1844A2E877F5097C19BC8CFC6EAD
+:10D0D000231D0EB61EC4BCABB3EF99519FF5E58579
+:10D0E00086AA589EAD9BE783B644CFA357F318ABEF
+:10D0F0005B6FB9E95AD0CFADCC9EEBCB6BBC541E65
+:10D10000E8DB949ED75C06DD5A789EAF816E67E1BE
+:10D110001F943E2103DD3E6F5DF0AB27E15BEB80AA
+:10D120009879A0E1CBC0979AA7FF739B778F0DCE1C
+:10D13000FDED880BA4307A05670860EF7D9E0EE751
+:10D140001A4EC9BD98EFD1BBD7EC827CC6F2BDEFB9
+:10D15000A27C9CDB7914E3AA84E7C99F237D7F2C02
+:10D16000AF59E0F3DBE460F9A31CEF905FEA76E2ED
+:10D170007B9E47CAF856CD2F8D9557DA6B1BC6E2BA
+:10D18000D0FCDC4015F593F8BD597DF9A6423ED0A0
+:10D19000E9982E4F579DB7B13F17D79B91FCE8E810
+:10D1A00079BB6ABE60844E6C1D51F39FCF35F3BCD2
+:10D1B00069FA3E6D2CE4C1B1F5DA1F14DE2551E4A5
+:10D1C00051CD8F3E6333E445072F2F2FFA52F0FEE7
+:10D1D000EFE2E3031B8B57AB78E9FE26BA3E56E23B
+:10D1E00098DD49FD53390EF705987F7A37F74F558B
+:10D1F0007CA9F0D68798DDD0BD85F9074679AE8E3B
+:10D20000715F52121FA7BA6DFF18D03BDD0776730E
+:10D210007E63FC5CDD728CE5DD52FD1CD4EA677E2A
+:10D22000BF84B1BF74DE9FBF3D7A7FFE964FA2F6EA
+:10D23000775AF2DE0EF09FEE6476D2E990382DDA5E
+:10D24000FD36963859973F50EF60F765884E1BDAE8
+:10D2500047F73AF2DF8B4F82A782793D754B791EF3
+:10D26000D0CF3C78AF689D633A01781E02FC68E23B
+:10D270000CB2CB47C04E93538A72457704DE3E7A98
+:10D28000249948504B7F299C06FAFC83EC9332F496
+:10D29000F79F86F8C87F4AA47E1085EB3F0382671C
+:10D2A000A93BB65DAD967D3F1575F18C6A73EF07AE
+:10D2B000609F9357ADB81F2EEEB306303EF60CBB01
+:10D2C00057E3E0CE2F9FC37B797E6526DC2E14408A
+:10D2D0001F94F238C5C99D5F3EF35F604742633AD1
+:10D2E0007EE933B43ED8CF2D7168EFF7EC881F0389
+:10D2F0007180D2571FBC11F44529E83EB0335F1A44
+:10D3000014ACA3FD9D18C8CA27B60DC17301153B07
+:10D310001C984F7870E7AE6AD0F7E75E8A23A0EFDB
+:10D32000CFCA5D7F85B27F4F3C6976A3DDE7D6AE7D
+:10D33000AB0B89E4D6DA731550D6E5B710CC6FC1C4
+:10D34000F81BE5E78AB6783CFFA1A9C7E539309814
+:10D35000DF133518E48EDA8D6E7DDE33FB3E3F8EB3
+:10D36000E92FBFB9F77E761F02ABEF577A4B58B95A
+:10D37000613093DB4EACBF48E557FEBD7FBFACBE0E
+:10D380003F8EC50322FDB0F6D56676BF8691BE3FBF
+:10D390008D13F879DCBF5C19EDFE8928F0B37BB9F9
+:10D3A000041280FB57C9762BE669552AE15190AFEC
+:10D3B000FEB2C2F63F2A9DE15190AFBE87EBBF4A55
+:10D3C0001B2DD3F783391C501FCAC4D2F522DEEBC4
+:10D3D000B4CB8AF7E155BDEAF0A29FF0F297279E01
+:10D3E000CA857CB538CC93AE7AF55F90FE55E6F0F1
+:10D3F0005DC0FFBDDBCD783F69F7F6C3E9603774E8
+:10D40000CBE1F4C48BECEB5485CCBA7D6A751EA7D6
+:10D410006B974C8073BCEA39C3F218FAE2F5389680
+:10D42000D7D11CE7FD15D373FAFB654ED7CED2DDFD
+:10D430009B586E89AEC75A402F68E27862E45C61FF
+:10D440000BF47B9674D50FA624A9127A717FBC7C4D
+:10D450004B461AF8BB07AC57E2BED501D98DFE206A
+:10D460003CB5FAF854AD2747C2F3F499391285A3B5
+:10D47000A7F99392C104F203ADB3A2E9A7BD7171FC
+:10D48000C84FE51673D4F39BBFE3FCB60DE46D1CE7
+:10D490001BCF931519F7801C54008E897637CEA7C1
+:10D4A0009CFA01EC9EA8D939DA73DB0BA506AC47D0
+:10D4B000E50BF1B190AC5772EDFDF5CAC225B93953
+:10D4C000520E2AACAFFBF84D8CD0890492D04E920C
+:10D4D000380DC9FA545DBEBF241759005F0A29727E
+:10D4E000492290BA01E5D44642F8B4533384AD439F
+:10D4F0003504E2E3A7F8FEAC59723F8AF7CD748891
+:10D50000A8CF2F85B777E39C08B759AA211EB43757
+:10D5100066B8C01E13023EF22DE587BADA6939EC0F
+:10D520005C38F142BE1BA6BE51F89CAE435F817DC4
+:10D5300040F98CDD63F57D12ACA3E3C131638CFF50
+:10D540004D66F7D91BC7FB86D38104F6EBEE3B870C
+:10D55000BF5EF5FE3CF0D7E3FF9A0FFB317617096B
+:10D5600083BD146727E1B831704F9E745A2BBF4EAC
+:10D57000C2CAC3283B835E734DD47F37F235F1486E
+:10D580009FF5E94511DB7F6668FFD9C5DAABF8F096
+:10D590005B367A8EE744F062E373084CF65CE8028F
+:10D5A0007C8C717AEA808E4AEF070F023EC6D899CA
+:10D5B0003F98D448B4FE5A8E9DE9ABE5FCFE69FA6B
+:10D5C0005764D7F4475C168C8FAEE478EFABAFC6E8
+:10D5D0004DFAD5B74A80D77EF5ADB1EADBA2D77751
+:10D5E000C482272E3A3C0931FA0F44AF5FFDEABBF3
+:10D5F0006F84DDF092E90D08CEF373CB3976F0AF8E
+:10D60000E23F482E665CC1F6030C74B301FF517E05
+:10D61000B08DD0BC87FFCBD2D06F5814FA9330F2C4
+:10D620005D31878796EDA914BE1F7370A76C62FBEE
+:10D630009573EE6571A21F5B587EE9317E1FD09C09
+:10D6400046E657CF59C2F61149193BE7E3A2FFC19D
+:10D650007877422794DE773608C17006DC5B63B0CA
+:10D660005FFBEEC759A840FD6243DC45E527F53C6A
+:10D67000D23C6E5F6770FE5C407A1D20F7C673EF88
+:10D68000AF71BDA6EAFDC03A9209E7F64593CD0316
+:10D69000FBA3223F674A9CEC3E3FE21DC2EE97533C
+:10D6A000F3B832DDF1B0BE91107FCFF759165FEFBE
+:10D6B0001EA43DA7255DB0E1FD2075B22705F4A0AD
+:10D6C0007C81DA75D455532E0C236ECD39326ACF56
+:10D6D000A170CB2E765FA2E42A22A56007F2FB019F
+:10D6E00048D2F43EBBEB4D8A87C5EBDC786E758182
+:10D6F0009DD999BF7014DD631F07F665BE87DD7382
+:10D70000ABA76360279B5F1DCC2FA33FDC758AC747
+:10D710008376E7746A31601CC783BFEF209ADDEF20
+:10D72000BA411EFF4D66BF57D00F0F8C7EE7931294
+:10D73000F15EF6F9CE551F009FAEE6F711AEA8CD0B
+:10D74000C4E7AADA14B43BEB6B3DF854F162F13450
+:10D75000E0BD6F9611AC3F8BCBC7EC0A6ACB403E65
+:10D7600085E4AA0943D9925643C0DEB5F6E1A70184
+:10D77000F1A3F4957D5836BBD8EF46C88D3310CF52
+:10D78000B43D29A5DF173B7C4F829C58DD57EBEE5B
+:10D790009133A78C35DC3768C09BCA1FDB18FED6D7
+:10D7A000088C3F8CF85B2377BA615F79CDF57DF704
+:10D7B000CE20FEA879CFF0F73BB6CF16137FAE444C
+:10D7C000B45FE7E7D5DF55475F3DC2F7171FAECD22
+:10D7D000477CADE4F7483E54EBC5A708F8A3F33304
+:10D7E000670508DC8FCE7E1B823EED455EB87F1656
+:10D7F0007817F027DA193ECD2935B8BF66B1337CEA
+:10D8000089F600E245B6337C8976C66F0A2F4B80D5
+:10D81000BF1C6C8FEF29FE0E007F59D226E8F0A5C1
+:10D82000244DBE3CFC3D41F147E148E2F265C44372
+:10D8300092C2EEA754E52A961DF7389D3FACDB1B3C
+:10D840006A093E07C6F0178739D8BA9964AAD92F52
+:10D85000033E12095F4F02242D8FB0D443F84B09C9
+:10D860001037940506076918A2BB57527449867B86
+:10D87000D9DC1B800FD61F964D902F2F2E99AE3BD3
+:10D880000F2ACEF226B8119F3EBCA7F9915A37D283
+:10D890006F1DD011EE01E5FED7439C9E0FF37B2850
+:10D8A0005772F958C3E5E5512E2775FCDEE4D5D350
+:10D8B000589E5552B689DF571626DA3CA6044F8883
+:10D8C00028142EB4A9DDF8C47B16C97BE6E048DA3B
+:10D8D0002E2E8B78814F12DE7B20C8EE6B2C4A05F2
+:10D8E0003B2841BD7F71A23B61361E840D4BCCEFBE
+:10D8F000A0AA10FD984E53B47BAAEA3C072C100F47
+:10D900008D054F9CC79BF1101D2FAED181F6FB00FA
+:10D910005FD1EC05B46C6F8CC3F85F1CFF7D163BC8
+:10D9200085BB5443EF58F7506F745C1FEFA0F4743D
+:10D93000018CF4F958E370FC5D96C7E522FC1D9755
+:10D94000C7F97AAADE73AEB6FB9AEB4767EED53A13
+:10D95000BF75BDECC576AE897AF95FCFF56DE2147F
+:10D960003D9FABFAF6789FBEF50D0378922F4C41A0
+:10D970003D96747374BD5B272B786F79DD6826E75D
+:10D980008162859D6BE9AF07304E7DDE376A23E803
+:10D990005195AF9611A67702C4E6C17588DF6FA3D3
+:10D9A000DAC12BE01E40AE5FE1298E60BF3F903CA4
+:10D9B00087DDE7BB9ADF63B596F215C17B4F3DF873
+:10D9C0009CEE60FB13CB2C63F13EB53ABB09F584AA
+:10D9D000F4BE39082687B47FBC0BE20592ECE9F46B
+:10D9E00042BCCF2185E0DEDC3A7B2EDEFB2E24E438
+:10D9F000BA80FE5F38E60FBD583E1D9D28DE97E9D0
+:10DA00004A2A221F66E16E009E5F915D3713881BD4
+:10DA10006E48AAB102DEC63B585CBFB1380FF14870
+:10DA2000F17B936360A49F41B3A6F7DD8305DD6EB0
+:10DA300088710EE60E07B397485A808CD0C879A338
+:10DA4000FA3B27EE00C9D4C8FBB2918504F687FAE9
+:10DA5000CB790C3DB699E9B1E542743DA6DA99AAB5
+:10DA60001E930DFA417DD60F9DA63BA7A524798074
+:10DA700077E1193079C0BE7BB9FE8E04C4430DE056
+:10DA800081A44CEFF35F7F300CECC7BCA8FC66D4DC
+:10DA90005FF3FBD6736F32D0E994EC1E341BF8E9C8
+:10DAA00070F4F57CD263573D0A7C30FF77A2A0DD8D
+:10DAB0004F29BDB002D7D3920BF9F82C6B9C867C12
+:10DAC0004F200AAEF1C34E36DDE704B84E36F23CC5
+:10DAD00080263908F919271BEFC3FB4A20CF5BD4F6
+:10DAE000ECEF935C37DA97EA3D632783F738B5FBB1
+:10DAF000BB25BFB07AC16E8DC55F254DD1FD7A586B
+:10DB000043217E4A01CC047B98DA37BD61B07F3671
+:10DB10009A3D011229071EB346CD4F5CEC98FA38A6
+:10DB2000E07DB1C3FB34C839B1B37B4163F3391B2A
+:10DB3000F7046C02C37ED3933C4F53F239B5F7BB65
+:10DB4000F5DDC7C9E324C412E3BB4DFD7D8318DFB7
+:10DB50009D2C9F83B8A27F57FD84B8889FD006F381
+:10DB6000A86A3C53FF3EE289FB091CEE533283FB5B
+:10DB7000D47366F63B3706BE38C5F347160A0CAFBA
+:10DB80002A7F9FEAB3777C780F8D91FF848D576D44
+:10DB9000184FFBFDB443C6385C25E51FE01B61E36D
+:10DBA00078CC5F171E1BFF28E4257D7644C4EFE583
+:10DBB000172CF8BDFB679E0D7320CEF3BA8CF7755A
+:10DBC0007FD631359EC579F471E8054EB6CE9FE615
+:10DBD000725F726115F2671F7F342C5040AE4A2E7F
+:10DBE000AC457BA6648B80F7449240EFA14912E7D5
+:10DBF000C309D0FE6CE132C0F7C406DCDF28DD6C5F
+:10DC0000F6AC12FAD3F9B4C3ADBB57BDB46B35F65D
+:10DC10004BA83D95A4D9EF3EC5F3804B2FB0FB0137
+:10DC2000892B405280EFB9DE89F0AFFEDED76E6BF4
+:10DC3000F438FBD7DC9E29B93041E73744E6F77D5D
+:10DC4000269F7C3D2FEDCA6770F5CD67C3F868F35A
+:10DC500089CC6322B6EF4E883E7E06C7F389DA325E
+:10DC600038B941CA1456AFA4E13E05F449495342BC
+:10DC7000A2A099576963852E0FA3B4A95899ABE95F
+:10DC8000374207DB6F278D88D02163AD7CDD323BC7
+:10DC9000ACF7450E278CB77161DE4FDCD01FD33F48
+:10DCA0001FCB0DE935A85FEE71463BD790E174EBD1
+:10DCB000E24AA58D9C3ED44ECED5D047A58BB1FD72
+:10DCC00089E6D2BC9F403CF909762B486CBD63A025
+:10DCD0005B4674BC4DE8C35B26E6035D1A6FDFD17B
+:10DCE000E5FDF4C31BA7AF8A17F53DB58F72005F42
+:10DCF0001320E03410FA61F4BF14BE22E372FA4F2D
+:10DD00008A3E0F5FDF3C969000B51FE65F721E0FE4
+:10DD10009280E522F350E94FAED6D1DFB776E475B5
+:10DD200020872ABDE71F7802F9773E9547D8973FAD
+:10DD3000D9709F6E7D88C01783EE2302242BEFFFDE
+:10DD40001CDD3F9603E990F71558C7D691531B1F6A
+:10DD500049D7E279B163D202A00BD934F0B2D68FA1
+:10DD6000C0644F871BD72519E361BB1D3EBF93BE1F
+:10DD70002FE37EF5F284C251D1D67DEA174E84F8A6
+:10DD8000735DEDB489106F93B9DD08BFAC05F6265D
+:10DD90005C811EED7EAD064ED7876A6B307E4D2CC2
+:10DDA00001E2D29EF725CC2EFA9AB0788BDA4E910A
+:10DDB0007D2E887F2A0229427B4EF2ADC8C8853865
+:10DDC0004652764083BFB54E66D7AD4E39E0827C71
+:10DDD0005233ED1FE2319634E9BC7E9F9295B385B4
+:10DDE000F132CC474E0A118C6766D1F71A7C2B4969
+:10DDF00014CE8BF89B92C589FB451261769A3A7FC7
+:10DE0000FA06D7B387F9BAB40CE2B849608799D05B
+:10DE10001F5ACFE394BFAC2DE27890701D3327B02A
+:10DE2000FA4A3C83DB0A716B11D6D530961D70C35C
+:10DE30008E885793E1EF8F261037FE4EDF0012AE2B
+:10DE4000C77B4C2675DD0FEFBD71BE2DC0075FA4EB
+:10DE5000767E20401CBAC87725ACBF8D6220DB4D92
+:10DE6000EBFF4AECCD867AF0FB5EEF25B2E750C8B7
+:10DE70005BF669F6A5D8BD9C6E6D5CCF581EBA44A2
+:10DE800032ECD77C73A5F67B739C7717C091F49125
+:10DE900080FB30755676AF4F9DE3B67858BF8F72D2
+:10DEA0007A21FD817F3A981D735E72C727627C33A9
+:10DEB00033E735DDF81E5D59E2FEDB26CA8F92E6B8
+:10DEC0005ED61192D704FC32B281BED7D22F4A5C03
+:10DED0002DD18ED7DF46DD8751E1A3E312C09F78B5
+:10DEE000A190ADAF063ED82330F8030EEE6F9180BF
+:10DEF00008F49CADDE172C2D6765F5F722808A1497
+:10DF00008EF7D5FD05B29C95F93EA57F2EDB8734B3
+:10DF1000C233BBFDE14E88EBCF6E4F9D07FB53B381
+:10DF2000EDA3FE0CCF3D72EF8138B003EF13F0FC90
+:10DF3000C78F7FFF9A1C479F3BDFDE88E78DCF723C
+:10DF4000B9BB8BF4E23DEC3EE2E2FBE4417C3F17DF
+:10DF50007E600ECB2119FCF439E1E08F6EA0A53B69
+:10DF60005F0BDE0066DB5D1DBDBF0135E00BB90A4E
+:10DF7000710F406DD7E639C4CAAC5D040F166E8FC1
+:10DF80005A705E91795B100FEFF7E58D07901E7D5B
+:10DF900078E2F72AA978E99B77FC6DD321CE1B4B59
+:10DFA0009FCDB667FE996D7E30B88C78FA0C3E51E5
+:10DFB0003BF233A7D71A4FF5DB474EAF0D9E959630
+:10DFC000DE746918CA8B13CAD5A26F6832C5C3D96B
+:10DFD00021BE2B07023E3A075C961EFDC0CAF40024
+:10DFE000C94DC7F9A8F7BE1F7CE0A403ECCEFA9D8B
+:10DFF000EFA6C3B34AEC5A733BC63745F487CEB796
+:10E000005E79D1F3611F40DC89AE7F23E3553E6426
+:10E01000F3BB9B9FAFB9BB350ECFD7DCBD44D4DD7E
+:10E02000DB7CF712967747A4CE31B7EAECF5E53101
+:10E03000FB813880B19F794B26938F06C03EAB6B36
+:10E0400012C6059E61FC356F8A57847CE4092B0457
+:10E050008CB78C3FEE6EEBA2E579C104FCBDA379D1
+:10E060000F2CCE817B08AA3B597C6F90B828FB67A8
+:10E07000103F39C0D671282F02F9B67BDD764DBC32
+:10E08000BF5BAEC9867BF70277DABDC03FC5B77A02
+:10E09000DFC7FB1C781C425D57773516631E6BF19A
+:10E0A0001C773ED0BD3864C5DF1F2CB610C946F5BD
+:10E0B00058B1442CF01CA410C90A4F1BB1C0336FD7
+:10E0C00019BB27BBA47126DA07CEFC2205EEBF2DB3
+:10E0D0006E7FFE73685F2A85F7B3732D0C3FC5ED25
+:10E0E00087BF02FE59E02DC2BCC3EF6C5174FEDF46
+:10E0F000E890BE7C4D9BBE9C1DD697733AF4E5AD6F
+:10E1000070C799C68E38B0D78CEB44C519764EEFE0
+:10E110001501D62688079B519E0A2ADAF3603FFA3A
+:10E12000CC8B0E137CDFF317E6F7F66EB5E27D6F4E
+:10E13000FBFF602336C82B7CC9BA11BE9FB185F2A4
+:10E14000200E47EBB3DFD92A0A8D02FFEDE5AB5570
+:10E150003F3D3806E6F5F25F599E4CEF5633FE7EA2
+:10E16000CA99DDCFBF08FB6267B65E8176D62B42C7
+:10E17000C004FD065632FA1BF9B4628BDE2FBE3F97
+:10E180009EE99B1E81E1FBCA46FDBCAF0AEACB3F7C
+:10E190008F67FED45CA2799F01FBF7EEFA14585703
+:10E1A0009F8D7EDFF0435C2E5E784151F956E4F797
+:10E1B000B311B7E6FCD29EC8FEDDBD57405E05E058
+:10E1C0006258E47D85615CB5FFA278B60F9FC4F705
+:10E1D000677A5F17113FA70DBF5BD867D7D5D6A465
+:10E1E0004ED1AC43258DFB938BC13F6ADA9F3C57E0
+:10E1F000B3BE546E3D987C07E62549F8BB4C95B3F9
+:10E200009F5B3B2109DE8B218017BE43DCAB3BF4D7
+:10E210001B27D4A3F6EE585183F7D2C6FB52A7684A
+:10E22000E4F46FE54B559E2AB97DB22BBFB310F2D3
+:10E23000C42B1AD9EF3755847E740BFCFE22696219
+:10E24000E74CF324522452F9A9DCFEA31FC2EF715C
+:10E25000F99F1EE701786817B7C2FB8A964FF03C1A
+:10E26000C12AC3EF08A8CF7D9CBEB47ED844EBAFD3
+:10E27000BACD5E06FA89F6FB1A940F646EC4FB4DA4
+:10E280009CA7589C96BE7F0F7E12E5D4E4C01B77F6
+:10E29000D0A66748E89D1B3260DE7A3EA37C2B80C7
+:10E2A000DDD5BB59C0DFB5A59656DECD60527B9754
+:10E2B00062DE2DFD7E77B4F3CE0B83FA7E8CF4FF05
+:10E2C00003E75FFA97A9E52363BD013302782EB116
+:10E2D0007209D5771A3BBFF27803DEE7681C078323
+:10E2E000709A7C03582FDD28DF56F5FE21C192C7B6
+:10E2F000F36687B332DE5B08FC4A19A5E26A32C5D1
+:10E300000DF8BE994C83E72B4278AD28323D8171E0
+:10E31000A06D71A827BA5D5DCF3D05FCD5321AE32B
+:10E320004F83F979CF6E7718EF79ECE1F1C96E1769
+:10E330002B97B75B310FE6CC5905F5E8D2D04127D2
+:10E34000D0A3FB45AB097E97F4CCF60193214FB2E5
+:10E350003BC4EEFF3D1D1A80BFFF1A6BDD32EA039E
+:10E36000759D3C06FF84F534DEFB35ACB76439CBD4
+:10E37000231D34A0263BDAEF49A8ED92949A6CF065
+:10E3800053FE17A753B28F00800000001F8B0800B8
+:10E3900000000000000BDD7D0B7854D5B5F03E7316
+:10E3A000CEBC92996466324926218F09841020E000
+:10E3B00024860814EB24040C187542D1A2B63880C8
+:10E3C0004080BC44DB46A55F2624424251428D0872
+:10E3D000087140B1F48A6DB0A8C106EF80F86AB543
+:10E3E00037DADE5EB5FDB92370295A1E23F452DBFD
+:10E3F000DBD67FADB5F799993349AABDF7B6FFF7DC
+:10E40000FDE9478FFBECC7597BADB5D75A7BADB55E
+:10E41000F744BE6EF1EC2D60F01728509C8C5DF235
+:10E42000BB3C9BA0BC4482573318333A7C465B3AD2
+:10E4300063D672C6BCF0CFF186BC5786FA53B2E7FA
+:10E440009BB6718CDDC57C0686CF72BF818D853E03
+:10E450009DD0388BB1650A0B290E782EF4BE2F4D56
+:10E46000A53263D07FD92E29D801FDEFDA6C64CCB8
+:10E47000C4E8EF33F8B7A217CAC5B1F22A16343090
+:10E4800019FE63575C3B187F95123A2AA530B6DA1D
+:10E49000C442C930EEEAA7B4FDD6B010C1D370E0D3
+:10E4A0003363FCF8303FC600B4FF64EABCBC6EDBEB
+:10E4B00034C69C0628C3BC236FEB838887FF907DFE
+:10E4C00034AF35CC4FE3DCDE5AC54EA531D67C5F88
+:10E4D0006BD65DF0BCD87A7FD65D57433DC201DF75
+:10E4E000B730DE9FC1BCF601CED654B3502EC0B7B4
+:10E4F0001CE69B5406E541293405CB26164829E342
+:10E50000EF53CBF87CBD71F0D5B31EFA5EFD2EED56
+:10E510007BF68B34C267031BA27AF6545C3DE0A302
+:10E5200041E0A1E100BC8FC3C3CC0352C07A159671
+:10E53000821D19005FD359C63641A9E9D06746CD7F
+:10E54000F8AC8731C04366126366A0D7A3125BD4D0
+:10E550005F42FD26D64D8136F8771D96DBA9DD0991
+:10E5600081BF476F5991E587765BEC50CE16089EC8
+:10E570000EDFD0E1C7A91C32C17792AE8E96A9BE3C
+:10E58000623D2FD7D98A6BB6E730B64DEFCFB201D7
+:10E590001297C9BED77480BF271DFE5B90DF96E936
+:10E5A000BC790ACE97798B7C00076BE57878ACACA8
+:10E5B00065624B490CAE187C9CBEDBA4FE900EF845
+:10E5C0002C7058F2EC7323DF46F47E4BAC5DB34DF8
+:10E5D000A279A41E0BBF3606E9FEBCC4F642BB1DE1
+:10E5E000D287AF8D817E3BE6B95907945D4027B94C
+:10E5F0000CDFB34E09F0527EA8EEEE5791CEE549FE
+:10E600009EF1F0683C5429375A68FE77FA009ECC98
+:10E61000E4963D3AA8CFBCB3B80CF91BE67DE702FF
+:10E62000787FAFCD4DDFCBB270BABBD6070AD69696
+:10E63000E0F77D77BF0ADF8B4C49F2E0F7330157F3
+:10E6400056073DBBCCD88EB54BD8EED1143E7EBA22
+:10E650004EBEB30ECB65BCEC582779F712F36DA50F
+:10E6600079671A590DC289EF8325B464BC07A93EA6
+:10E67000C8E93BBBA514C7CB1CC79F4E432807C79F
+:10E68000794BA5F760968E6520BCF0DF00CFBD0703
+:10E690002B331DD0FFAD732645970A4F176343D820
+:10E6A0004E0959183E0B8B797B93685F3A3B1317E1
+:10E6B00083334FDBEEA2DE9B7A35E025F08ECC90E3
+:10E6C0001EBFB37853EDD0EE4B063E8F443AF62191
+:10E6D0007D603ECD9F02E46971745B74C580E33553
+:10E6E0007FAAB0E0D5B1F7E7DA4C2C58142B37D419
+:10E6F0001F9B8BED1AD9D006E4ABC6FE64168CE3E3
+:10E70000F72F258DFC5D95BF9B3FD5B1401AB16FAA
+:10E710008ECF8AF8896C588EF01F91D83E86F50608
+:10E720001688FB7EF3A70E6D390A67068D136BC73B
+:10E73000B4ED067E4FEDD8F4700A7EE7822D9CE2A0
+:10E7400010F3C37ED9326B41BA5C0CEA027A58C727
+:10E7500017DCBCFE226335FD96587B75BC0B8B0C19
+:10E760002C44788FD0B8889700C8B69D839F18DC5A
+:10E77000506E183C4A7851F9211E3F8138B991D129
+:10E780003114D2C19AFE856D5557891948714C5D77
+:10E79000BF6BBABCB3A05ED669D6737279747D9331
+:10E7A000587954270B79D0D0553D2BBECCDBC7FA16
+:10E7B00037D654C3FA2F2FE1FD4FD89ADE58AFC495
+:10E7C000E411CC230FF1122D9B12CA16284F892B6E
+:10E7D000DB12EA9D09F5AE84720E6F7FCE1ACA93E2
+:10E7E0003D8C7D645B5BA3807C3997155A2C417905
+:10E7F00073C7BD35D520E71ACB87BC32CACF41C914
+:10E8000023B118FE9A3CCC1B04FC593C61C3B212E4
+:10E81000C4C3D06BB8FE1B06249B047C6EE93F1872
+:10E82000A232F673C7F5EB97A85F43FF87D46FD486
+:10E83000F18B75B48E37159FA4768000DB69A0D369
+:10E840005799C45201A5058AFF8FA8BF1AFB7FC341
+:10E85000F52E8B18F8FCB81CBC90E57D85E4E01122
+:10E86000C986EB2ECA7738AE25C6EF6AFB5F4D1915
+:10E87000FC571C26F9DE4FDA1568FF7F1A7F338DAF
+:10E8800001A97E854D66A05C0D4E447DBC93F927A1
+:10E89000A21EFA7AE3F8A33A6877421FDECD005F42
+:10E8A000C5F64D350AB43B610DE74A2043266DEDB0
+:10E8B000E5E5F4F06EC46760EBA384DF13B9E15CB7
+:10E8C0001D94A7DA43BC3C3EBC1BCBB76E7D86973C
+:10E8D000A7847365E83F3670A0A61ACAFB6C23AF05
+:10E8E000D77C3B97E32A7C97C779B3EDE9C8765C80
+:10E8F0004FECD603C6401E2E5EFDF1B3FB000F8B1E
+:10E90000EF4F2639B5EFDC57E6FB68FE019F520159
+:10E91000F290B33ED763248F15B203B250773962B9
+:10E92000F4B0E60DB949CE4F6A3988FA3E737109E1
+:10E93000C9F94F53BDEDF669B1E72719F00438DA8C
+:10E94000ED362E97659D97DA3F6025BB678B99CF93
+:10E9500007D60DD1D722E8512EE6536ED7D133CF4B
+:10E960003687C6FB40F2EE30C9F8640133D27355E6
+:10E9700012D91977EC01B90072B957C0DDBB7562C5
+:10E980003000E3DF21311FCA8D5EBB370BE5C30BBF
+:10E990007F91EFC4F9F69642199E3F16F2BEB7CEAC
+:10E9A0009B658FD38BBD7B78BD2A777A0B787F559B
+:10E9B000DF6476F0EF646E99B817E791AC302F966C
+:10E9C000972F2ADADB4E7A7B01CD9B79BD5912CC89
+:10E9D000F7F4AAB13AB42355FAA4157A6FC2F9DC58
+:10E9E0008EE35B627452BFDF8EF346BD2F83DE87FA
+:10E9F000F93EE0F0D3FCC10E984A76A0B003DA717C
+:10EA0000BED362F8654A781ABEFFFF084FF760FD73
+:10EA1000FF144F23C88B00B66B6C0579A18B93173D
+:10EA2000027FDBA4903E93CB0B0FEA397CBF00E45E
+:10EA3000E3ED36FF468447FDFEE2071AC9EE53E1D7
+:10EA40004AFED68B355F65C3D759A25D76E203D304
+:10EA500066067AEC84A19FE4E289F9CCD38EF24376
+:10EA6000C7EA118FAA5D5971FF9AB718D8B397ED0D
+:10EA700032D1B95BF266E1BCBA81AE26D4C37586E9
+:10EA8000E0BE82985EECB50777AC40BADE52E20990
+:10EA9000B8493FD27A0BB42653BB5E7B9829583FC6
+:10EAA000C36D034890CE448FC86D86E05E09E9CD02
+:10EAB000F9A577D5A4604022BA07A8FF6D9C7F7A9C
+:10EAC000EB18D9F7BDB7B9886FCC2C68467846E308
+:10EAD000838C0E467CC414EFD43A6B0C0F3F13EBBF
+:10EAE0003AB93CFCFCBFA11DB9D94C7624EA4CDCF8
+:10EAF00077B19E4C8217E8F902F187BA5F7A242B2E
+:10EB0000B889F6679E0AA4C746AB7709C1FFED64D2
+:10EB100037C2BFCBCCBA4C65B8FD609D24EF043C36
+:10EB2000ACE73186F6D99DC23EFBF7FA4B56B403EB
+:10EB30005EB573FB0A19C504F26F29E3F54BD725BF
+:10EB40007F88FB99A5EBE49011F62BAC6B8E371CFC
+:10EB5000B7CF208E82F1FC425EB2ED112BF28D1FF9
+:10EB6000FBA5E0F87FB4BA2D5886FE5391ECD0BFD8
+:10EB700038D6FF3DB16E17CB1C7ED696EC46FC26F0
+:10EB8000CAF5F754F87A1EF3C67F4FFD4EE2B8B0CF
+:10EB90008F7B1FF105780FA5A23DFF6D99E89A08BC
+:10EBA000AFD31079C80CF58BDB64FB7AC0A7BFD557
+:10EBB0004AF355E1BD3333722DEDAF12C63F93DCFE
+:10EBC00054A1E0FCC5FE83ADD3EEBF1833C4CAC068
+:10EBD00017CB5984F631C3DE8B7D6BE2BE8FB1BF9C
+:10EBE00018E3DBA9EB85B9A504F8055FB92505E9AC
+:10EBF000E69738DDA2F44E805BC5A7EC18199F4E4E
+:10EC0000433817E595BFD5487848ECAFEABDC7CC87
+:10EC1000B03E80AFB64B12F1E3F6FB92498F311351
+:10EC2000A763F3EA2437F2E74E43E4695A372F1912
+:10EC300019D2F5A239F202C9A342EE37B8F83379F6
+:10EC40000FB6BB90CEF9FAC2613DAD270E0CD83B92
+:10EC50003F93F752BDC4C7BDD09EECC6F5D88C9883
+:10EC600084EF3707FEAB8D01FE4EE9F83EB87940E0
+:10EC7000BBDFBD00FFEACB6272E122E3DF090C706B
+:10EC80003900335D45DFB923896D82719B7492171A
+:10EC9000EDA3A6D593821D9C5F4CB85E1A04484D27
+:10ECA0003AD8F795C5D67793EE6411EE9B1A4C9B34
+:10ECB00087E414AA3F8EFB2D86FB25E8B71A3B1587
+:10ECC0000CE7E7A6CDBFFD33C2DD74484BF78618CD
+:10ECD0007F489F49D83F8E5F0A627C40F635CA87DD
+:10ECE0006A161C2F713F0C96936B8682E887691613
+:10ECF000FE89F463E1B9C81FD6F27EB6149ECD67D3
+:10ED0000B97D317370CF2BB8CFB5D70CE5E2349B0A
+:10ED10005BD75E7DFAEA187D5538670C6E9571FFFA
+:10ED2000A6DA2571FBC7890BA6C43FD7533FDC8FFA
+:10ED3000E2F7C2F80AD785C2F5D936A1CF40EF91E4
+:10ED4000DC5DDE3381F41EEA25945FEA7E16E51968
+:10ED5000CA8F271D558B1C30CF92B4AAAF38A6F1AD
+:10ED6000EF901D8F9BA019C3F199A857D476B8AF27
+:10ED70006DB18CDE2EEAE7D991CAE583225179C5BF
+:10ED80004FF57B36117C0AF1CBDADD05246F557F18
+:10ED90004C83F043AD10FE9B15C27FB372BB91B99B
+:10EDA000E3FD55416DB941ACF74616E67EACFD502A
+:10EDB0001FEFB7A966212BD6A3FF069FFDDAFECD74
+:10EDC0002C385B41FA0E7C668C7FCF7AF97CEF148D
+:10EDD00074DF61E67E9B99EBF6C8DC19C5E79B5AA8
+:10EDE000E62D7810F5C49B7AF22FFC87A0938A1742
+:10EDF000A3A3EAEB88EF24DC8F61BB078D8497D354
+:10EE0000A08F0F0ABFC602DC67B6F9B30A0B113D2B
+:10EE1000B6BC05D6E1F8DDF492B91EF965B343A797
+:10EE2000E1A72A879ECAE4EF41BCB727935D0D682E
+:10EE30009E8A7C543156D5936C2AFA993ED483BD70
+:10EE400005E5A65B2D7E1C2F8C7601947708F9B51D
+:10EE5000C361A0F1D472741F27F805BE43E3A1DF9C
+:10EE6000C517C707C168FBADC25EE47261DBAA24A7
+:10EE7000924731BED531E2DB129F01FD452F0939A2
+:10EE8000F2122094F651FD662E47142E9F5E3A3BF7
+:10EE900089E4DE1B1FAF26B972695112334AD4DEF2
+:10EEA0002B61FDF3C6E07A28DF25FCA82F49DC0E94
+:10EEB0000C1CB1D2380D06FF0EF42B343C37DE03A8
+:10EEC00014632F1882DF7F1AEB5F3693DFAA218548
+:10EED000C3D9F0D21892933FD6079FF901F9218C3C
+:10EEE000649F3524B953A9FE27690CEBBB92FD83BF
+:10EEF00048CF6C23B71B1B0CA1223BE0F16490DBD5
+:10EF0000BF2751D0E0F88356B26B00CC2CFCFEA991
+:10EF1000EE4CCF26770C2FA71E9A4CFCBF4DCFE9A5
+:10EF20001638CCFD9A27F5BEB959503EF97CA90791
+:10EF3000768EECA2CF1032008CCD5BB8BDB64CE71C
+:10EF4000EE6B45D9F472B247B3DF7C78652DD637C6
+:10EF5000AF5E7713CAC1D1D633CAF3787FED0516F9
+:10EF6000C9A3FD66FDD8FE107CF7C2E0440FA94797
+:10EF7000E60262039FD878DBD37AC037F2D7113D1F
+:10EF8000F1EF171D1FE78BFB3FD42FF89D6690BF55
+:10EF9000513F32C9DFB8B23C5299D3B3F9A54C61A5
+:10EFA0009F69EBEF48F55F40B9D6F4DDDF9F682538
+:10EFB000FC4648FEB11EEE1F3FADF72E463EB5574C
+:10EFC000870C4BE3F6B78634BE8E9619855E6721B3
+:10EFD00043FCBA53EB2BAAB47CAE3EF5697C1F69A7
+:10EFE0001DE2727C78BD4EAC9BAF18516F71D70D8E
+:10EFF000ECA7CF727F8621CD4DF533CF860CCBA009
+:10F000009CBF2E6458219EB82E00DF2113CCFBF448
+:10F010000E2B5FCF80061C67C57446F6C80A19EC34
+:10F02000D0327CEF1E08035DCE3C6FE7FCF527C0B5
+:10F030000AE07B0913ED8C60B782DC7AB1530AA138
+:10F040005DBF64BB71AFB900D7B157B6223D774BF6
+:10F0500024B796745616ED80F2EA435388FE29D3FE
+:10F06000395FAE0EDA49FFCD147270993168203BDA
+:10F07000FA19EEA783F1C91E6E804E5965C3F1805F
+:10F08000F25BC30F416D9C6166BF90A7FBE3E20B8F
+:10F0900063E3E47A7F427FB0E3B4FC1150F50E974E
+:10F0A00073CC9D89724E95C34687AF348DE452610F
+:10F0B00026D217E8C9E5E44189F0DAC85AB8DE106B
+:10F0C000F23EFA5DA12FCEC801AE978C5BE93937CD
+:10F0D000AD80E8B61AF50DF9CDF9FE6E343E989B79
+:10F0E000A6137271643EB85EF041C35916BA16BEDB
+:10F0F000D7B08E851AA7F2A7752AE941AE0F4D2227
+:10F100009E61E2F18ECFD38B897A7098DE4BD077F7
+:10F110009906A1DF049DE3FDD9A8EF67AE0BCAE80D
+:10F12000D7CCB379AFCD4C8FD92FCDEF994CEEAB77
+:10F13000B0EC63632DE89FA97CC685FE5DD88FE3A4
+:10F14000BA4A06BCEC81F7BB55FBD6C5E7EB32707B
+:10F15000FED52B3E566A41BA0CD17E3592CE6CC894
+:10F160008F2A3E775BA15F19F6E3EB2DDADFC43A15
+:10F1700093E2FA57BD6426B97AE5B0356824BBC37B
+:10F180009F6F87F1327E65243BF4C24B56D29F17A6
+:10F1900084FE73AAFB7EB681E8D38A744D476EAABB
+:10F1A0001A83FE5326CD1F832250B5C31AEDA3F94F
+:10F1B000B3457DC1D0AD9CAF8CB45FBC620F7F13F3
+:10F1C000CB000F43FBBA05E98CFEF643B34B1F801F
+:10F1D000F7CD3E8B8763DF5F8AFC6A94EFBD15FD38
+:10F1E0002A73E57591FB601E8DB9169B11BA54E721
+:10F1F000FFFA97B741F9A3437A66443AEF9BBD887B
+:10F200008D1D5DFEAE0AEA4F86E3D6CB9AFDDA721B
+:10F2100063BFB6DCCC9493E13879FC589AD5796613
+:10F2200032C90ECF67C0DF4663CBD93D00AFF1C70F
+:10F2300046D2470D69FE5D69E837D5455E433C1B04
+:10F24000F3CF4D453F4555FE9F28AE73E5DBCC839C
+:10F25000705F315792FEBEB2C3EC0EC4C9AF66C137
+:10F26000FFBD79B554DFBBD3E896787DEDB40AB421
+:10F2700007E9DBF867D201FE9BB7CFFB88F64D6844
+:10F28000B543B917ED4BECF79C146C47FB713BD7BA
+:10F290007BE7C17E34A1FE14EBA9591E9C6B82FF53
+:10F2A000EC75D44C44F9A2FC59F121FD37E25071C0
+:10F2B000F6EEE1E8FAE47E9C1BD08F338EFC3887B3
+:10F2C000516E349AC2864A18E7BA3FFF8EE4F2CAFA
+:10F2D000D6A564D7C7EC5C23C99195F7F9E9FD2B56
+:10F2E0003BAEA7799D8179237ECEECE6FBB99539BB
+:10F2F0009620C2779D9DDBBF2BA19F240DC74B227B
+:10F300001E7EB3EB7A17D2FB378C7F2FD0CFED84E4
+:10F31000DFD8865248FEB85B52D0CE6BDE7EFD470A
+:10F3200028B756EE963DA8C7D9112BF93D56EE9E4B
+:10F330003371B905C7B99C568978EB9B6393E9BDD6
+:10F34000EC0B72FFC9D075F05EE9BBC68DEBE4F83B
+:10F350006E2387CF6E7A1AE1BFEECF32F1BDA26382
+:10F360007EB4577B0DDE89B8DEDCBBF6CD45BCFE36
+:10F37000A62E5B47ED9F95980DF1606FCDC0F72BE2
+:10F3800025C587EBAB7EFBAADA787BA4334D267CC0
+:10F3900057E6AFCB085B88DF6F453DD7B85B4F764C
+:10F3A000DDF1051FFCF236678CDF57CA3DB7CE8C06
+:10F3B000B3379A77DD28F8013436E069A5C0933178
+:10F3C0007F5D117EF7F3F87FE5FA96221E8FF9EB49
+:10F3D000EB20BABE77F1F5F007D0F7B45FCF7168D4
+:10F3E000ECFBD1F641AABFD9E461DE7D168A1B7A17
+:10F3F000719F9BE754A83ECFC9ED6CE50F6BF7BF3B
+:10F400000DF0F7A7F98D4E789FCFBCA5485777C46C
+:10F410005605E6244E89EC1FB6CBC8ED4985FBDDC9
+:10F42000B6A5B3A737C5C1998DE3A5D3FAB43961A1
+:10F43000DC0BEFFFE935C45F53DEB9A93C9EF63B18
+:10F440008A4F590679DCD2E2F131E48BE6C13A7693
+:10F4500057494C1E367BB8BC4E9CD77227DF6734A9
+:10F460003B23344E753A5F67AABF77676B12F9F595
+:10F47000763A8366BEBF0D3094E73795CB3CDE22EB
+:10F48000EC129FF09399BCAF308CC7308FEC190F02
+:10F49000E521EFA9CE3428BF5D3EC72343D9E27DE5
+:10F4A000B26B2CCEDBA317F5E3C85FF8D6AC4AB23B
+:10F4B0004F6EF2CAF45D569F42FBF521EFCF9D7768
+:10F4C000C1776F66DEB4D3F08D1A50D648C721FCE1
+:10F4D00036DA018ABFDC19E75FBDD1332FED74BC8A
+:10F4E000BEF472FD8FFBF17E113718090F25699567
+:10F4F0003311BFD77D99D3E1E367F9FEE36333F7B7
+:10F5000063ABED3EB6723D53EB94841DD89F87727A
+:10F510003E5AFE5AB1260EEC34F4E7E13AFBADA4B4
+:10F520001D6775978EE2B3ABBA18C5633FFEFE8BBD
+:10F5300079286F3FDAF762DED238F812FBA9CF5B89
+:10F540009D5ABF94EA87748AB8F4528F91FBFB46A8
+:10F55000F143AAEDD976BE1FBB08D21DF94EED7757
+:10F56000B13EC98B76E545662279B67450F835BD53
+:10F57000DE4227EE1FD4FE09E36F41FE01B8A4016D
+:10F5800089F6E7C9251192AFAB4CBED7C6B8312F6B
+:10F59000C54BF499877494905FBD069CB722F679A9
+:10F5A00046C5D788F45CDEA3A56396D326E2944EC5
+:10F5B000A2BBA1C9A2A07EC8E810F2FA1B3ADABF2A
+:10F5C00018B25D16944BD715257562DCDD9994321F
+:10F5D00015FDE6B9D9C5D43E50C5F93A90C1C86FFA
+:10F5E00095C55A2492B736EEE7CE99CE6C98E7F1DE
+:10F5F000A293DB832EE6D92E933DD82F91BF5FCC0B
+:10F600005F95EBC82F28E73E964CC42FD2A044F656
+:10F610009DACEB5F8CE38EC63FBD09FCD3FB0FE6D0
+:10F620009F3EF57BC3F8C74F71BAA52ED3C8FC2304
+:10F63000FCAA5FB8FD6871C26F98543FB384F3AD04
+:10F6400015E3D59A2C21792AC98773F1FED45D6020
+:10F6500067E27E448D2B8EE958E2E676FA5018F781
+:10F66000E5C9D79848CF7D47375480F67C629C1116
+:10F67000286B47798F3286FC8AAD55BED36971FA03
+:10F68000FE08DF3734DDE7A5F7B307B97E6F2E3408
+:10F6900090DDD93C200590CE4D3E43D0544071952D
+:10F6A00025A4B71F32BB799CC4DD4E71926FBB7924
+:10F6B0001C25EA470DF73D80FC566F21BF4362BC15
+:10F6C000E585BFC8FCFBE3197DBFB794C7777AE730
+:10F6D000B9C9AF911847635DDAF5ABC6512E5A012F
+:10F6E00031F0BDA59BCD44876C99E399A59AB87E6E
+:10F6F000192E07C85F9B315D1046C43BA2EB1A244C
+:10F700000396B345BD1A9FB196F80AD0C2BD3DED30
+:10F71000B93793D2FF967C86D6EFFCD57C8680B134
+:10F7200016F3194C683D8B7A041BF4AD5AF69ADD3A
+:10F7300018BF89D52B60379A0624F1BDE76F98531F
+:10F74000087890D4EFAFDFE4B550BC58F3BD78F83B
+:10F750009484F1F530BEC52DDA070ECC9BA3505C26
+:10F7600052D47FD68DF91B5BF4DAF108A5A23F16BF
+:10F77000D4EF1DCF9CFB9DCD3931BD0F7680297D07
+:10F780005A4CFF6FFCA0B6E72AF856B2EDB201F56D
+:10F79000AAAAC79B9D3CBF2171BD3AD2F97A05FB4D
+:10F7A000D5914E7283DBB5B5223E09F6EC5C5C5A0E
+:10F7B000CDEB7C0CE393602F64A4631EC3FBE7CE08
+:10F7C0001C45FA2DF898ECF9E64F15EE7701BB03CE
+:10F7D000ED7393E07336A0277DABF2C16A217F7A87
+:10F7E000EDA0EF915F8F48D302C4172D79B7000DBC
+:10F7F000EE4FF7BA697CB1EF4A8477463AF7933413
+:10F800001757ED28C2F19F9218EAFB4DC52733D058
+:10F810002E691EFC3063795CBF55038F121E56EDB6
+:10F82000D78F38FF19E9DCBE6C3AFC3CF9073F0E74
+:10F830004AB496EB9560F74C28D7D7EBD04263E5F6
+:10F84000C125B791BF7F91818D87F9E50B7DD4BC30
+:10F85000FF2B8199B83F837F12BCDAE95B417A6F55
+:10F86000E7229305E30ECDC54BEF263CD892BC882A
+:10F87000874DC55559F89DA6BAB9368A13807D853E
+:10F88000F54DF7DD4E7E1315AE4D03FA1AB4BB2AC3
+:10F89000C0CEFA11C09DEB985FE381F537463E5824
+:10F8A0007A8F05E3C223CBDF7FC9E0F4EC947C813F
+:10F8B0009BCBC94FC8E2FD7EF903DC9EAB4B37689A
+:10F8C000FCC275E9DCCE9C15189A8DBCF7B2124EBD
+:10F8D00046BBB799793FC1FD25F359DCFB884E5CE7
+:10F8E0008E38DBDCE43F3239C3DFB90AEB6729B479
+:10F8F0007F604AF811FCEE856EA7671313FC8BE559
+:10F90000FB4A822847FF39DDBF18F9AC42D88F1770
+:10F910000E5F5F8A7E36D53EEADE630E621CB0DB88
+:10F92000EAFE6E0DCAC13F283CEE6D8A0CCD467AC8
+:10F93000FCD141E3769B83DD48FFC0563DD51FB621
+:10F94000FA5721DF9CADAB29A2BC1B4BA008E3BC3E
+:10F950007A670F433B01B60BE44F30397D0CE3A1CE
+:10F96000B3034B1409E57C82DD315BE48F92F084B4
+:10F97000F755428C8D072E3863A225D0F9595ACC01
+:10F980000E79E34F0B157CA9DA273A138F67552FB1
+:10F990004A6232F2FD86C86B3AF45F3B87C87E6DDF
+:10F9A000EC97E83B8DC5CF513ED81A917714CDFF27
+:10F9B00051C2940FB53E3D59E8F14ECEEF6C88F63A
+:10F9C000CBEC00A7276361CA938AED23DAA99D3A9D
+:10F9D0009E41F8DD1B85DF053418D53F94AEDA076C
+:10F9E000EBC553CDEBE2DFDD260D7965C46BA9A431
+:10F9F000F117ABCFA7D2B97D987A2C3217D76FE425
+:10FA0000B09AA7C9F330774C9BE441D369589EE67E
+:10FA1000C02773916FC0D0A6F5DA34F0C5F234BFB9
+:10FA20002FF60DFFEB799A1EC9BB179E3F4AB7739D
+:10FA3000BF959AA7E9E1F853E36C89F99917B242A7
+:10FA40000ACFB70AF7ED43FE1C30521E57EDC0EB4C
+:10FA5000EFA17EAC35B17E8C4326DA196DB6AF0CC2
+:10FA600022DF5F3C7FA6EF418679BA2F78285F239B
+:10FA7000C17E48DC27ECC52659A3DB7BEF46E9C9EC
+:10FA8000EDBD68F97FDDDEE3F67C601FCF0F50E54A
+:10FA900079B3D89F5DACBF94827AE644149E843CCF
+:10FAA00086A7441EC3E0C8790C8AC807027B3D4084
+:10FAB0007C7290C775DE783A99E4C7259BB217ED42
+:10FAC000A5F3D6C83711598AB0933A8F18DD282F7D
+:10FAD00040DE91FC0E1CD4F3380DC66D308EF3F26F
+:10FAE0004411C711F1A29792C96E694871A7627F4C
+:10FAF000354EF363A16F1A92787CA62BD97F397D9E
+:10FB000084B8CD1E617FED81A16C38DE7B4611C7C4
+:10FB1000060181FB9D877279DC41C46D2E8AB8CDC8
+:10FB2000A9625DC8C0FD10E4A77277292C0BEADD3D
+:10FB3000EF99836EEECF32E940EF2F53E3362F7308
+:10FB40003FD532119F39B5602EE5072DC7FC7719D7
+:10FB5000FD18DCCF1CCDC767361DCE670D888B9D89
+:10FB600028620280F56BE0B5A493D09E707742992D
+:10FB70008C656F4F0D7C7769A78EF623CBBAB4FEE8
+:10FB8000F22B9BEEAE41FDBDB193C71F035D12E9A1
+:10FB9000EF65CCEB427B43E587828C34A273A053A4
+:10FBA000E7C5EFCCC8E0FE04407D90E6279E9D7A35
+:10FBB000E1671770B4335D089F3A893F37DA949A4A
+:10FBC00011F5B218AF53DF62AA443B3657477EDEC9
+:10FBD0002B06EF22F2933A8A886E9DD696AE1A5E75
+:10FBE0004F6BE58A39E2A3FA6B156EE831B703E58E
+:10FBF00064668688DF24CC77798FB69C187F581589
+:10FC0000D4969731FF842C3C87B05FFB3E3383CB87
+:10FC1000A92B9B0A849FDF437EFE4EBDFBDD029431
+:10FC200053DD0AC9C9F61C8E2F5D2E7F8EB5572F66
+:10FC300022FBC00E7605C1CBE11F7BAD53427DD9BF
+:10FC400069E77CF93F853B11DECA8C226E27A071E3
+:10FC500087EBA85B0A727C71B8BFA8BF626986F0A7
+:10FC60001708F9132DFFEFEF37393F76CB62BDD977
+:10FC700048FE2C15F1C65392E7E910BEB7805D002F
+:10FC8000702FEB96CBD03E99FD150BCDA3E9657394
+:10FC9000D008F58DEBC279B88E9AAAC2452D23E023
+:10FCA00015A15554B905ED963A617F80EBB64B1B13
+:10FCB000871A1E57F47E2B231DF721A70EBE8EF444
+:10FCC0003E6826BD04FF75D488FE8EC305642F4DA3
+:10FCD0004DF5B765A03E4F0AF57DAF00ED136E1FE1
+:10FCE000350E1AF7A0FDB7B4537B6E866DD6C6B934
+:10FCF000589783FC19AC57FB1ECFA768FA0D8B7B76
+:10FD0000713DBFCDE09F8876DD755FE6F1F5F3AB21
+:10FD1000740CE9BB4CF6AC403972DEACB5BBCF5BC2
+:10FD200039BDFAA274F614219DFB46A5B3A708E9D4
+:10FD3000BC4CC7FCF1E334229DAFC6EC734EE7F335
+:10FD4000CF5F5384743E77F09A22A4F3367D8F17E9
+:10FD5000D7CD930EFF5EC4CFE9393EB29BD4BCC968
+:10FD60002FCA8F8732B4FA305AFE3BF93F46D3830D
+:10FD7000A1281C5A3DE834B873501E2E3519FFAA2D
+:10FD80003EC4BF11FD692623F9235EFED3E58751EA
+:10FD9000BF050665B23FD4F15E56FCE3D05FF0F2DA
+:10FDA0007B2E4F401A7DFC066157B94C2C807E0F8C
+:10FDB000D5DE57EDC64479FC0B319FD319DE1AB45A
+:10FDC000B355FF6CBD18D314BCCCEDD3A724F2BF40
+:10FDD0009ADCFD3C7FFEC8121BFA67CF06B93FB61E
+:10FDE000E9F952F2D7AE0ABE12C2FC273628D97002
+:10FDF000DFB0EAA90F53309E0DFBD0531971F19576
+:10FE000039621F7A36782A05E3DEF0FD6AFC7EB29D
+:10FE1000336240FE6D82FD1934614D4A84CE0D354A
+:10FE20003919E9FBF201ED7E4D8D4FEEF41948DEF4
+:10FE3000ED1C9482B83FCB30F80B72503FB11CDB05
+:10FE400099E4D87AF924C36BCB9C161F17F65ECEC3
+:10FE500088CB570AEF48253E0CEB9997EC801D564E
+:10FE6000219778BCE63F77D9833C7F89B7FFCF6085
+:10FE70000195557DBD429CC35B21CEE1A1FC0E25C1
+:10FE8000C8EFF87234DEAC9E3703791E1A29FE1DC6
+:10FE900097B714DFBF8945447EDE6746CDB8D17C75
+:10FEA0009D965237C0BDE66B163A67D80C7CDD5A7A
+:10FEB00016E3C3063115950F9B845FB7B9FE24ED99
+:10FEC000039AF17C05DA551ECE870DB03FC2FCCDFA
+:10FED000C475CBFAB5F98CA3ADE329995ABD122D9F
+:10FEE000FF83FC98D333B5EB579DBFEA078FCE73E2
+:10FEF00050E2EB2B615E89FBCA44FFB5BA2FFCA22E
+:10FF000072EDE64CAD5C8B96FFC172ED8ECCD1E408
+:10FF10009A363EF037CBB5C4384121F77F639C0059
+:10FF2000E3B6FFD338C147EE9E0C1DCFC3D7C44FF5
+:10FF3000BBA4969B4CE330AEC8E3CB8D5623C56182
+:10FF400013E3AACDEEB9228E38F4CB19A8370FE906
+:10FF500019EAF37ACB4A8A5736CB070C78A4705843
+:10FF60003C51394A76FBDF1A575F9F198DAB1760FA
+:10FF70005CFD15CBE5347F1C3DAB4AC0C02F193D5D
+:10FF8000DF68B3A053B2C88B302901668FEB3F5AAC
+:10FF9000BFDE4C6E27BF22F2635C069EC7BEC50A59
+:10FFA000FB3098BF4BC7F377EE4FF76D43F968729C
+:10FFB00073FC3E71F8AB0CCF1D3DA1EF27391268E1
+:10FFC000B478501EAA7E17757C45F80FBE28DFFF57
+:10FFD0002081EF7FF077E6FB447C0CA872E76F8D01
+:10FFE000876D07DC68D607A3B8D75B18CF2918CE72
+:10FFF000C7A38D331A3FFF34D3F75A26C947EF54AE
+:020000022000DC
+:10000000CACBFD82F226B93C720AFD3BEC90D18D41
+:10001000FB0D933897C13667893C4A4F451DE51360
+:10002000F3730DEAF98FD1ECC20FA3729ADB851F2F
+:100030008E2AA7FF7B76E1030EDF299CE7E94A6F52
+:1000400011EACD8D56801FF77BDF378E78CE423D8B
+:100050000F00FCC4CF9B3CCBE3E0897CF58704FD1B
+:10006000F287BFB37E194D9EEA5D2A1C7F67795ADD
+:10007000FFC714F47B8E3E4E80E0A8A81AF28AB81F
+:1000800015C3B8913A8FE6219E7F9621F2AAD4F744
+:10009000116117DEE9F266BAA0FFB9F74D26960A9C
+:1000A0002610F218DA633E0BC5039AFA799E48D3FC
+:1000B0003A46715FF51C65D3401D43BBAF3FCD5F32
+:1000C0008079601B3FB004E454F4932F6068EF5DC7
+:1000D000789F971BD2FCE3294F6C5D581377A8F8E3
+:1000E000ECF206F46700BCE41F708AFC4C15BE3AC3
+:1000F000179767EAF32681EFE8BC9C1C4ED62F07C2
+:10010000D14E4C760F911FA9E91037DE2A642FF9E2
+:10011000EBD91A079D9F683A54594AE7CDFBCDA504
+:1001200068E756FCAAD686FE8973D73A29CF204FB6
+:100130000EAF423BEB9FD3FDB3105E6B79701EDABE
+:10014000A9F960A7A2DD7BEEE0BC527F9CBF7B1BC0
+:10015000FABB61DC6D56AD3F9B99789E78FD5E9E43
+:10016000077CD8EA9F8BF8DD66E6F006B68ABC67A6
+:10017000E1E74E5CFFEABA8F9E73BCC344716955D8
+:100180002E6CD3333FEA3D559E94883C39C007CF4F
+:10019000D31BACE3F91EA26C716AF3154F67CC292F
+:1001A00041784AD0D13B0DEF518848E8775F2EE285
+:1001B000F0D78B7C0A357FCAA8F8BE8EEDD9BA9AE3
+:1001C00058FC7D2CF617F177912793FC29B79FC730
+:1001D000DA0CC43756585FE41F01BE41FACC8A0CD2
+:1001E000CDC6F34485BDA15988CF973FD5113E9424
+:1001F000BAB7287E928A648371C66D0E774F403FEE
+:100200008AED17D7225DDC3DB62A445D7F9AAF9117
+:10021000E0505A8A715F59F5AF7A9E07782499FCAD
+:1002200003BD790D940778E103E388E746D467803E
+:10023000ADA7BCBFB1033F273FBEF59034623E6718
+:1002400097CBC2CF0D078628BF8CCD72123E942368
+:10025000BFA2B8AFD2AD9007A353EFD5E139A84004
+:100260003B23FFE5F85E9B0EE9922FF24B2EBEFC7E
+:100270005F53FDB44F51FDF6419E0FA40F6FC07D3B
+:1002800097D21EFE32AC60D678C8AE6B2AC1F1227E
+:100290004D3CAF3D99219FE40F8C5BFF2528E7770C
+:1002A000D99884F2E7A535F9E42F85798E1F619EF0
+:1002B00077BB78FE8E722459877A4BD9CA28FF50B3
+:1002C000B1675411DC8F4219C65923F8468D470295
+:1002D000B82ED44777BAFCBB11CFD17332AD49FCED
+:1002E0009C8C3877696DFDE0593C7FD267E0E70C64
+:1002F0008FBD3C7901F9EDBA1509E970C5BE24DF5F
+:1003000006EFF78B756B558698CD128FFF63946F50
+:1003100039F608CF4B53F49C4F946EE71EF40B7ED6
+:100320009AEAA7BCD26B3B4332C5B36CA71FA97135
+:10033000C7ED6BB6733DD2B49FEFA713F7319FA7FC
+:100340003F8EBAB47649B4FC0FB24BDE4AD01B7F65
+:10035000F3FE8469F77589F649E23E6E98DD9D30BB
+:10036000DE68768A9AD75115FB0EF1C32B56D50E4F
+:100370000A68F25EAA2CE2DC9B493BFE53224F47FF
+:10038000CD83C9E870B7635E79E4DB8CFC6C6A3EB0
+:100390004EA08AEF1B023A139D8773B11ECAC31980
+:1003A000C3429244F67F98CE7566623E0EF47BDFC0
+:1003B0003596E0DECD3C5D32C943B784709B318F0A
+:1003C00083F236833B56E0776EB1D077CC98C77115
+:1003D0003586E2BD3B507ECEAEE771886CD0B7C8A3
+:1003E000B7D9859C0FCD8B783E879AAFA1E657A8E9
+:1003F00078A812F8CD9EB0A200F707DD92FFFBEAC5
+:1004000079DAF873D2D1F3D1ABC6D27993E8F9B9DE
+:100410004226EABFD839E9447CAAF91D5536BF2DDA
+:100420002B7DF87959953FE2E84670ED3CC2EDF539
+:10043000AA7A03C17F71D57CF2235E5CA563B86E96
+:10044000AA068D9CDF12BEB7337A0F46D04CF75DFB
+:1004500008BA7F9EBD0AF42C463FEDB1B69AAB4F69
+:10046000036E8FB7F9E879D12CF5CB57D179C6C592
+:1004700028992E67EDACC57B0A2E5A237978CFC117
+:10048000E5EC076FA4727AE4049653761EBA11EF76
+:100490003DB8383ED287F71E14EEACE4F5C883D9D8
+:1004A0008C5D9555716380E6CDFD4EB363E7B3CBAC
+:1004B000113F8D2CBC6188FC3B3C7F1FF3FD900EEF
+:1004C0002E8B81EC1997C8B364D522EF12233050DC
+:1004D000EEC82AA578B585B90F0D617D0E3F2704BA
+:1004E000F5C4BF1DE3B95FD824E8CA72543F52383F
+:1004F00080F2A9A3C04EFDA372F49031C8FD59FC4F
+:10050000FBEF3C3F85E24B6AFE2863B6DC8553284F
+:10051000DF445356EF37608A2D17ED850EBDB04B83
+:1005200045392DD55F97156717BD33E75B25B80EA5
+:10053000CEBFF04021CAA5EB0D60B78F20877E9D0E
+:10054000CDE5D045BDA54B023BEDE729FEDB719C17
+:10055000F79217CFB5C3BC16A5551AEC086FE0FB90
+:1005600032CAC574416FFB420E9FBDDA272D8771D9
+:100570003BCCB07EA17FBA5FF1529EBD7FA1740BD0
+:10058000C0DD2171790B9D52695F52EC4EC5FCE5CF
+:1005900006715E5216EB7E46FF5619EDE977DB06D3
+:1005A000662A8531F87E2EE2CB3F2F6077D68DB05C
+:1005B000DF6DCDE2727B81EC9E827CB4411A78AB18
+:1005C000360BDFBBE9FD9C94D672CC3BBE3EB9A591
+:1005D0001CF5CFB0F7A9F0BE24AE6CE4ED1A4C9137
+:1005E0003C3C9FEC4DF6AFCBC2B8D0920F296EF9D0
+:1005F000CDEC774E60DEC13BFA9ED929A85F0AC4D4
+:10060000B97EE1377C6D82EA3734F1F264EE378CE3
+:10061000E6734DE1F964B50BF939C55A91AF30D79E
+:10062000C6CFF5CC2D2FF074008837B18882726F59
+:10063000EE7BBE14DCB7B385FE72DF94D1ED19E614
+:10064000D2BBE3D7EB3C775C19FEDD50AC2DDFE885
+:10065000D1966F9EFEE709F1E53DC9DE1D38EF1F1B
+:100660004B3CFF313083D9689E4E298076C7E41712
+:10067000B3C5F94E9EA7F74F625FF4E27446F519D1
+:10068000FB4D7B31FF5DF533CBA27EB28B99F21D22
+:10069000FCBE00D4571149E4FB392996C25EB8DB91
+:1006A000C6F1076D0D30CE0B4BDCB43E322C3AF662
+:1006B000655C43E526B2432AC69892906F8E09BEC8
+:1006C00053CFEBAA7C58A1301FE62FC0A717E2F347
+:1006D0001DBDED28FA97031F31C6E955A950FEA1AB
+:1006E000F81663ED547E4CF0F7310153E0DB0AADB0
+:1006F000E757AD06A2A7FC13790FEA098CCDA0DF5E
+:10070000F8D2E649049FBA7E6055173A33C8A52D42
+:10071000C655740844B1B02754FE460B08DB8DC1A2
+:10072000FF2C203E27791399C6EF4FF879019727C0
+:1007300091AD0E711E8CC7CB724DD171BD386E5606
+:10074000F43BFCBC51862843554807F3FE4D560147
+:1007500097CB83AFFF81F4B2C5E3C7EF18524C7457
+:100760004E465D37B6CEDFBE553B03E759F40D9AD2
+:10077000E77CAB0DE7590C6CBDC8414F6F1A8DC7B4
+:10078000D78F9CE471E33AF94ACDE1994A1CDF40E6
+:10079000FF46DE3F59DBDF05FD1D71FD53A07FC91C
+:1007A000F0FE4F594D21DD541CA7C21D26791EA213
+:1007B000C9CC17F3923378BFF9221FB43005DAA3FE
+:1007C000BE29D6E66BB0E91E13BFAF439B9F71BD38
+:1007D000B42E0BD7D53C53E36018C67B5DD0ED7AC1
+:1007E0009DFF77783FDDEB8B8B8EE37AAB31051580
+:1007F000DC0FDDC0421B9098172BFD4FD8C7913CF2
+:10080000F80BAE8B26D93FC101E5F3FA9EC2BB0BB4
+:1008100068BD7C96356D38BC2A5FA8F0227F209F8A
+:1008200045F92301EE289D6EEAA744B6DD60F7E0A6
+:1008300053B583186BE1F9C6EEDCD8BC8089E69A23
+:100840005A0AD10E79BD3D4072E37AFB2394D7F466
+:10085000E7317E6736C0B5E8AA4FE85E13E65A3244
+:1008600001ED7B80373D3BFDFF1DBCAABD372CDF72
+:10087000F6238326DF76B475A57EB799F1FB69660A
+:100880000FEEA1FCD9E685160F9E8368C6FCCF72D9
+:100890008A2F911D87E784E99E13C924ECAE2F9A15
+:1008A00097CBD7616FA39BECB7A81C1779E5BDA5C3
+:1008B0001CEEDEBBDDEA3D27DCBE5BC2F83D29EA6B
+:1008C0003D27CB6D54AFE69FF7EEE17EBCDEE72718
+:1008D000D07929B0DFC85E60A93A0E5F81F67E1537
+:1008E000FC933262F9D2DBF4DCDEDCA9F354209E07
+:1008F00077621CE8AFC47FBF9AADF59BA8E544BF03
+:10090000DE930EFFEDC817CB4BBC7912F0CF32034C
+:10091000F7DB017FEDC2B31535ACE529BC3F701E96
+:100920006BF9856E1CF1979FF86BF227FC5EC1187E
+:100930007F2DE1FC1520A1A4F25794AF8A13F3ABED
+:10094000FCABB17DAFBDFF574D68A70E1A892E6A6B
+:100950009E5CE23A8E83E7B49EC3E394658267EDC2
+:1009600048F07C113E8FE7AF4CC6F979347ECF5406
+:1009700058C05A16E3F73DC9FE76843FCAF71BF804
+:100980007E6418DCB285F8E3D6DB649E3F9ECCF52E
+:1009900015C62BB2E0FB75E2FBB776733EBAD56A9B
+:1009A00020BEAB1B6CA47C2256CDE30E1EF81FDFCD
+:1009B000077A09BF8B44BF85CE523DB2ECC25A6D57
+:1009C0007C6291458D7FF8F4B81E6F5DA83F19AF2A
+:1009D000EF17B1CD9F60DEDB228C63A8FDE0BB8FFB
+:1009E0006747E31813308E715CECD32F027F23FF2F
+:1009F000BF9ABE72D7DDC0B7131E2F29437FCE9C8E
+:100A00008C554F6D85F2F7764EA2F2AB1977DCFB71
+:100A10000ED6F71551B91A2F71C1FD4623EF5F5C51
+:100A200071DBFC02F8EE71B31817D715EEFB92FCE0
+:100A3000BD75D0CE35756C19E623560BF970F16E85
+:100A40009E0F7FC355569EE2B9D24D7EA3EA245134
+:100A5000FF753EEE5BA5FF568679A9D563238BE92A
+:100A60003EC6B21F4FC2F271E993C523C54D26178A
+:100A70004BA189809F6A076F5F5BF6FD6CDCC757EF
+:100A800057F1F2644F65F738ACD75D5A3CD2B9D014
+:100A90009F8AF5143DF724D6E98BDE0FE99C93CFAE
+:100AA0002479708ABEE91FF27B892C920DFD8F3E5E
+:100AB0006F81827ED2D95E9EB758656ACFC2FDEF44
+:100AC0004D7E4339E69FDA4CA5C7D1CE489D5E39AD
+:100AD0000DE93BDBC4F4A89780CFFF85F8FC9A4F63
+:100AE000F25290B92C5A3E57F9A84EE5EF6A2D1FE5
+:100AF000C3FAFCD7ECF4CF97AFA3F1317CFFDFB1A1
+:100B0000FFA22F69F54A74BC84F59638FE6872001E
+:100B1000FFE2E55C0C8E7E5A57399815360ED75D8C
+:100B20008FBAEE220887413744E73EF225CF243AB8
+:100B3000F0388AFE57E1CB05D9C6CA86C3857F8ABD
+:100B40006A9771086CB60CFC2EAF877E5EE688C192
+:100B500005DF676350EF6FE0F0EC965AB8DC107673
+:100B6000B1BA3F6E52E73BA09D6F45123FEFEC429A
+:100B7000FF05F673964EFA6B70370BBDB9D0E47B68
+:100B8000C80873B8C5BE8CF8E1AB2CF03CDA27C6B8
+:100B900054BF634C3AEEBB0247C205E4CFA5BC018B
+:100BA000A077DA9838FB44852B111F4DA3C8C344A6
+:100BB000B813F110A3CF10D957EAF9A9E8BC12E68F
+:100BC000D361E5EB3532CDA8DE5F528CEBE26D6987
+:100BD0009227DE9E7E3B416F27C2A5DA11AA5E55A1
+:100BE000E1417F11FF7EA41DCF90DD38662CD99D99
+:100BF0002ADF640AB80C3A69C438EA8D6374AA7FA4
+:100C00004E43C7C4734E2ABED4BCA0443CA9793D10
+:100C1000C3E23509F1C8D1DA49603F8F710CC79F33
+:100C20001AEF7144FD5C029FA512C93F87F073CD96
+:100C3000F6F0F309B5ADFC9C7C6D0D4C0070FFB671
+:100C4000F01FA8787EC8EEBF8DF347781AEED3BFA9
+:100C50003BEF698A73A8F7C825E267F928F8198D70
+:100C6000CF47833F2DD5B712BF7B5E1AAAC0CA2DCE
+:100C7000E9E2FE41E62FC07560B71554A21F02E4F9
+:100C8000EA679FE1660EAB80AEE50E7F33F2F9575F
+:100C9000996F0ED2D751E3D773FF3A23FFED5AB1C4
+:100CA000DF9A23F4EDA55D32C507AABD131F9B850E
+:100CB00076E21B7A16A4F5EE25FDB946C07F099FA2
+:100CC000D8DEC2F5EECA377F54012B864DD8AE8BE5
+:100CD000DDAF00FF26069334F72B4CDEEFD094A750
+:100CE000F4676BDA5F353056535F1A9AA4A9BFFADE
+:100CF0008D324D79DAD04C4DFB6BDEABD2946784EC
+:100D0000E76BDA7FE9EC024DF9DAC8ED9AF6A7C491
+:100D1000BE9805BC43C51978BF389FEF759F2ED587
+:100D2000F4FB6DCADC37900FEFDACCF3972B01336D
+:100D30009A7B267AB85DD102FFE374F52988AF1556
+:100D4000606F63DEF2CAED5ABBA37E70EB0694A51A
+:100D5000897915AB594B155E49979857516D5BA230
+:100D600043BEFBA731C2EEB8865D23EE85F9AB74B6
+:100D70002D62E3FF5B7435BAB47435BBB5744D2E88
+:100D8000D6D2D5EAD1D23575BA96AE76AF96AE69DF
+:100D9000355ABAA6FBB474CD5CA4A56B965F4BD74D
+:100DA00031F55ABAE6B668E99ADFAAA55F4160B59F
+:100DB000965E09F456E5E5B8AEB59A7651BAFBEA07
+:100DC000291F667CCFFD9A7155BA07E07F9CEE2DF6
+:100DD00094AFFEB7D29DB120F95F13E97E3681DE74
+:100DE000A0AF3E42B90076C6397C2E9A20EC79DF5E
+:100DF000C876862A7FE2F57AFCBE7534B9344C8F0A
+:100E0000897DECA87A2C611FFB3E66F1907DB49938
+:100E1000FC3CB709FEBC8CAF66A01FF507A49FDFA2
+:100E20000740A6035CEF23DCF09DF79326939FE138
+:100E30000E16D2D3BDBF98890883DE8989C932DEF8
+:100E4000E7E3A6E732A1BF970B3F8437D99F92C350
+:100E5000FD0FF919F8DD9C217EFFF25B695FE89ECA
+:100E60008293E887079D721AFDF0F0BC60E6FC7083
+:100E700046950F5EE676C6E16DE96C89F4323A7C00
+:100E8000703FBBF4AB12C51996FE9E3FC7E770BB1F
+:100E900037F1D9D1AAE28DEF876EC87193FECD618B
+:100EA000FDC27E637ECB381A87FBCD9FE4F78F3E71
+:100EB0002B3165BA838E49111D334D1CAE67F5CCBD
+:100EC00084F87B86F9DD8897EF28209A789EFE24A7
+:100ED000E487A5BF7F672CFAB164D97513DE2F3D77
+:100EE0001DBF0770CCF95A8B847EDD4C578B847EF6
+:100EF000A361EF0FDD2FE1F9C26899F176F88778E9
+:100F000050FD73C53A1EA78EDCCDF7174F7D9D911E
+:100F1000DFA9A3355019C0F8940C0607E6B1E8F92B
+:100F200079E41B72B8DF2D8B0DD1BDA6EC356117AE
+:100F30008AFBE04B44DEFB0511E759B1C7C4304FD3
+:100F4000A2E4E05107C67556002D87509F297EBA4E
+:100F50005FA364C7AB0E7ECFB8DE8EE7D8543D3AB0
+:100F60003ABD1576262E7F1CE8D832921E5F93CBB1
+:100F7000E3B31D6D35B3302EA3C2F3609B7716F239
+:100F800087AC7818C693F0DE9DF8FC338313EAE350
+:100F9000D6AF62A9D194F5161F5D66B1A1AD85F8F3
+:100FA0004C2FEE07DA98B3D616FFBB01AB7374E291
+:100FB0001EF200433B9B8B7A7C2A67503EFC91F1EA
+:100FC0007DA8D105E3C4CBB57BF358BC5FB9ABCDED
+:100FD00047F06E90FC7E1CC458C842E614CC5BC03F
+:100FE000B397F07EC7F56F601E8DC1BAD613728FAE
+:100FF0008E37A34BB9122F971EC801B9941C934B7F
+:10100000DF6D3B4B78EA685B44DF037C318C9F05E6
+:10101000B2B87DDAD1B684DEEBC0CE427E7A65C747
+:1010200084A36EA83F01FFF09E1CA393C3C5CAF31F
+:10103000483F2D167C803EAB5CE09F13AD7AE2B357
+:101040007B722D415C84F7BC3DFE28DEF369005EB7
+:1010500092FF06B8A3DF11783208B904FCE4C3F5A7
+:1010600066C856C8FFEBB02D203AFD77C753F16B29
+:101070003033BA87C6906B21BFCD1785F37B390912
+:101080007ABE3C8FE4E83D022FAFECE0794727EED3
+:101090006564BFDE731FF7BFDDD3C828FF9BB5C2F1
+:1010A0005F458C6F54799D8E3781C0CB9E3610344E
+:1010B000458C3DDC66C293572C19FD64E36274ECE9
+:1010C000F12A7674C76FAD76D6E1F3E1E9A77B50DC
+:1010D000AC6C99F5BB217CA28F1BBF6F6B6141B4D7
+:1010E0003329160BDFB7D74319BE9F22EA53FCBC46
+:1010F0009C2AEA5317F172AEF739A91A014B88837B
+:10110000E45A1CF30A51EEDDC5F8B95B71EE7EB707
+:1011100090BB632C8EBA6AACFF1AA37C7CB5FE71BF
+:10112000519F6539D9350EE5F2426DFF1D020F99C9
+:1011300096933DB3295EA2AD57E31BE9964B6F50E2
+:10114000FF126DFDA3A2BFD572696836D6176ABFBC
+:10115000FF90A84FB67079C87CFCFE54B5FE3BA248
+:10116000DE8CF5F87D8FB6BE5B7CBF430A127DE84E
+:101170008E585C3FE9DC5FDAD7C6AEC5F5D3D3162F
+:10118000A175F470DBA7442709992C3DB6AE6CAD70
+:101190006CC4F3E092906729EEB0D73B82BC53EB6E
+:1011A0001D367EDE5D7619888F8C16212FC43A8C11
+:1011B000CA0BA9C5C3998BFBB13F8F9F61815D416C
+:1011C000FB220FFE909F73EED5317F9CDCCA6E48E8
+:1011D00062FEB8F6AEBB1C9A72C6D7B235ED9D0B57
+:1011E000C76AEA2DE59334F5CC9B4BEB65ADE0ABDC
+:1011F000A492324DBD7A0E9FF5E46AEC677DE14C16
+:101200004DBB4BC56EFAFD9033F3D4DF19F1985006
+:101210002EACB58ECD44BDF34CDB7434B2D9B3B033
+:101220009EF0E8D4013BCF2F3E807159B4D7DBBC90
+:10123000F47E1FD483E5C29E84F5E686F67BDA6CE5
+:10124000547EA2CD45CFDD6D6E7A3EDE564CF53B29
+:10125000DA3C547E0CC6C7E7A3300EBE7FA4AD8631
+:10126000CA5BDB7C54DED2B688CA0FB5F9E9F99DBA
+:10127000B67A7ADFDDD642E58D6DADF47CB02D40D7
+:10128000CF8EB62EAABF46D0FB8038C778A0929FDB
+:101290004B4EA4E3AC5C49732F9835963F302B1727
+:1012A000F307FAC39AFBDD71DE349E99CF3F71BC20
+:1012B0003A1C0FBE3B890DB527F3754C71C7F1037E
+:1012C0009EF5C9C0EF635A381D0A0622549F55CFB8
+:1012D000695127E065CE00CBA9E0C750B1DD0569B3
+:1012E000A82A99C76129BF8CB9609E15E27E1C624D
+:1012F000BBA00EE152A673BDA9D2353A6F3B87134E
+:10130000E73F12BC5F13F397CBFBF9FD17353D2187
+:1013100064FB246F0BDD7F615AE40BE1EF57387DEE
+:101320007E3A8F3FE9D3B9B0B90139F3E997991BF8
+:101330009E390DDA7D4FF65D659AFD85FCE9C3CCDB
+:101340007D358C5BA2DD9F2415AED5F433E5DCAF93
+:10135000A93738D76BEA97AE29D8E0427C8E611462
+:101360009F316E6E6718525CDEBB95E0DA24F07E2A
+:101370004172D379DEC041353ECFEDF3EF09BDC2F6
+:101380004C9B693D4CB0F362516A40877AE1DC8F37
+:1013900052491E3DFD842E88FED7892CA8C3F53FF7
+:1013A00019CC3DAC9F8237E8CA74A58A8CE552E619
+:1013B00096B17C358BD0FE04ECF3F5B9DC3E7FC2F0
+:1013C0008CF1C15CFFF778DE5288F46691A06791DA
+:1013D000BA1FD9AE24FA65BB72890FB5E7993A8571
+:1013E0009DDE6EAFC8C4B8E88551F2CAACAE993381
+:1013F000F177B4AC59D3E9A9BE7FC8AD1BF19CEE1F
+:10140000E3025F2ADF4F0426177CFF38CEE37CF926
+:10141000BB19B8DD6B2A8C10FF5F90BCAE2588D756
+:101420003765CE878359342F45E0553958E95A023C
+:10143000F853DE1EE709B0D8779E6EF3CE54945869
+:10144000B948E445EE6FAB9B591DF7FE75014F316E
+:101450001BAA41FD545CA2F304696497467E990B74
+:101460007BBC78CE5C29631E146F1359CF7AD4D518
+:10147000CA5F64CA73518ECD606ED817582C21860E
+:101480007941AF47E7C934BFAFF43B5B752ADD173D
+:10149000981D957BA813F1F79486907F7ED7ABE7D4
+:1014A000F33AA6AD2FB6F0FC9D15C586A05BC2B081
+:1014B0007A0FDD8BA7F4490C4D7FE52FB3090FECB4
+:1014C0008564E2BFE4ED53E94AED9B14FF0F91BE42
+:1014D000E743EE1774E3042F42BBC6C986BD688F8D
+:1014E0004D40BCE0840A8B09AFCBC57CF7B72D21FA
+:1014F0003CFD5ACCA33337011EE6F1E2BD912B7AB5
+:1015000055FF87769E0F9557DD8CF7EC750CC9C299
+:1015100056D2E273937E682AFE36DDF930C0251379
+:101520009CBF46FACBDB2BE8F7954081D0FC1A9F95
+:1015300080FD7E01C9A31AD2DBD374949F9AC85749
+:10154000A7841C6BC9E5797F56D79767E2EFBCC5C6
+:10155000CAB3883F9FD1B162CA2FD1F1FDA59ABF0E
+:101560000186831BF775A579BAE83D1AF3515FDB55
+:101570007594F727EF49A2F389B25DA13CE34E4B86
+:10158000B56D358E635328AE32579E358476B3D110
+:10159000AEBB1AEDEEE37BEF1FC2FC12395761E8D8
+:1015A0002FEAB429DCEEC8D1513E9662AF36611CF9
+:1015B000A6C872BA12F17974CF37C9BF217F43E44C
+:1015C00088087F925E90AC93B5D0F8811C45DCE72B
+:1015D000E1AD2DCD10210437EE7F6A3E423FCA7146
+:1015E000DB2533DA2B6ECB0AF2A715E615D07CF497
+:1015F000186F83F213EB2ED9516EBDB96783A30028
+:10160000EDE7A0423648F19F3BB2E9DCF91E039DAD
+:101610008B57F19A1F503471BBDC566DD99810BFAF
+:10162000D3279C4BCACA2B107A6E110BC5CD47EF3E
+:10163000E2FB35E6B4D07EA7304F629FE962E53128
+:10164000A2BC5F1FC8F6007E8EED59918FF3BA726F
+:10165000D84F79BEA3D9FB1FE7BAD5DF4332EBE8F9
+:101660007ED59019F37E9F6A63E968DF99820AE567
+:101670005DEF13F2ACD0C2F9DF90CFF93CF159D84D
+:10168000C3D79D722029988C74B3F59705804F2697
+:10169000BF328FB941FF15DABCE43F2C6C35A4632F
+:1016A000FEC0DC1F5A884F2E5992C84FA8B4267925
+:1016B000F07DC7DE8A62771CDCC1365B3AE6E5EC7A
+:1016C0006D33A5A39C0A8E225FC7D97594AFECD663
+:1016D000F17CBAF9791CAEF979FCBE9779A2FCA429
+:1016E000125880703E09F4C43CE9A39BB93DBCB6D6
+:1016F000DD4470AC7D731CD955A3E1EDE936573A52
+:10170000DE0FBF77B32E1BFD4795DD859BF09E84D2
+:10171000B5567E4FAC9C3AE9314C45673FD533B462
+:10172000DF3B52667A96C5C97739755631F2952CEA
+:1017300007B2D12F7267DEFC9B315F12E8B713CB83
+:101740002BFB4A79D91AC8C6FCCAE6BE69BC9C1EE6
+:10175000D889F995DFEA9BC1CBB9816CFC1DA9B68C
+:10176000BE6B79797C60279637F655F232FA9E4047
+:10177000766EE99B7333CAD90E83A71E05F20F005C
+:10178000FE1280BF5F3CB70ABCA8F5CFE17BC0F377
+:1017900021F14CAC7F41F41B18A5FE25513F38CAFE
+:1017A000F82F8B7EA151FA1F13FD8E8FD2FF35D1FA
+:1017B000EF8D51EA7F22EADF1A65FC9F897E43A301
+:1017C000F47F57F4FBC528FD7F29FABD374AFD0792
+:1017D000A2FED709E39F10EDC3E2FD58EBE60F42EE
+:1017E000C07763418EA05C2AB66E76E03ADFDB55A7
+:1017F0004EFCDF51C1E33B2ABF8FC5DF6F827A5DAC
+:101800003EBF4F4A97CFE33CCF88F1810FB720DF2F
+:10181000AD7D5BA63C9B0E9DE76C10E5E8261DD9CF
+:10182000036BDFE4FBF3B5DD4A30FEFCC53309F0A2
+:101830006F10F0750A789FCCE3F139A3CB955E1B4E
+:10184000EF47B269CB9896857217E437E5ED1677C6
+:1018500057751597638C4C471688D2680AE17D0D41
+:101860008A55E8055B794F31C26751E89CBA6257E7
+:1018700042FBB1BFAB9CEC3B15BE4E8B42F775C92A
+:1018800056AE07E6FE70960DEDAC4EE61FF2627F97
+:101890009742F6FBD1AE321BCA3D83F52E1BAEDF5D
+:1018A00076379F5775537112CA6BF9211DC9EFE343
+:1018B00036BEDEFB5C3AF25B805EA1F32C20AF3DCE
+:1018C000A82326B0503B9D8F78F88525DCAFC7ACA8
+:1018D000A515745E448D434B4A9CFD7F59E0275FFC
+:1018E000E81105F50B3C9F2C17E71C02DCFF046494
+:1018F000738D893BAF79394FE6E740D438A25C4B12
+:10190000F716E5AD5334FEF79C7BB5654382DE5098
+:1019100012F4CAB82E9093717AA72060D3944FE640
+:1019200009BF8E8779D07E9DFBC3CD240F2FA17E6A
+:101930009346977B51F92BE4F193E21E9E2703FC1B
+:101940001CF1D1CD653F417AAFEDD6D1BDD35F5407
+:101950008E3E93C7B87FDA0F7A07ED198565E37E6F
+:10196000E9F3F0305EEF73D0BD0A9F838FF18F965D
+:101970003B50DE8EF72BA47786E98DCFC1D7B3928B
+:10198000E73D3FD2D19EC4ED6A1B9F77678693DF08
+:101990004724CE1FCAC25E7B50F8C195D4B96EFCF5
+:1019A00089904E7B0B9537489ECC1BA0FD46C96F96
+:1019B000C3F21B8E24AE777293880FF7A32D43F7E3
+:1019C0001C16F8D03FD21F34A8F71486F0FF0E6221
+:1019D0007E8E7A0FA28BEC33710F63EFCDD5D85E7C
+:1019E000B14D469373DA138F6DD1830D7AD0C0A2B7
+:1019F000EDF13CD533C775E29EC4DD5BD05E3D980A
+:101A0000C434F7401E443F3A8D17DC82F73EC2F7DC
+:101A10006E90610F767DFEF7B658B262F054B90F42
+:101A20006C69A73C59BE2FB1337E4FF779773805E3
+:101A3000970BEC4FAECAC77DF99ED3199ADF5D13A1
+:101A4000ED5345FBA6C148D30137B59F960FEBA0D8
+:101A50007120925242EB2B5211DF3E45ECF7E3DA54
+:101A60007F89C61FA57DB10ACF81776F2DE1ED2B50
+:101A700071FC0BEE7006E5BC24C093367CFCEBFFDA
+:101A80001A3C9344FBF3A177A9FD0516CE9852406A
+:101A9000FD6EC27E17DF7AB742CC3B03ED64908ABD
+:101AA00037E37B34B7F8EFB1B490FDDC6FEAB1A156
+:101AB000BD66D6F7F850EE16E2BD4ED363CF05F9FA
+:101AC00085DCAE4A78DF6F6269B5C88FAD3ADABFA0
+:101AD000F49B86CA4AD09E7ED102320FF5C23A0FDD
+:101AE000CAC181F05A4F09B4EBCB9945FB8A838672
+:101AF000967E3ADFBBC442E74FFB6C3D365C3F66E7
+:101B00007B8F0DE308F27DDC7E52965AFC4F213F1D
+:101B100085D6162F8F5BBF556E3DC1DFFDAA65339D
+:101B2000EE03BAF59E9E0968675B15CA3F57960E8D
+:101B3000CEA7F3823FD03192EF30AF2A287736EA32
+:101B4000E8BEFA87DD4BEF413C30C5E7AB827E79DA
+:101B5000E98A84E72F1E547C268C5F1885DDD6E742
+:101B6000E1BFF7AA7E7787B02F77E4F37BABBA9714
+:101B70001C287E0DFAF5B5AEEDC7EF99279A18E649
+:101B800099F5E59CE9C6F3A28FBB60C70B78B0342A
+:101B9000E8E8F75A1EAF8536A9E8CF3068FC15CFC4
+:101BA0004AFDD43ED0A8A37D82A5C4A0F16FA43580
+:101BB000E8BCE8773CE0F66F427EBBFA6DE506FCD8
+:101BC0009E6BBC6243FDF490EB17261DC09952AE8C
+:101BD0001DD7364B3B8EA35A5BEFACD5D6672CD4C2
+:101BE000D6BBBE6648F0D768CB29C8478847900166
+:101BF00016D04349BC8A2559AED0EF8575FB77F5E1
+:101C00004C8036C6E440E96B006FD2A424DAEF6F53
+:101C10007C3509171FC81F467267E3144679AFC7A2
+:101C200072BFE9427D9A889FBE1C03CDD75208F847
+:101C30002CC0FDFA59FA5D2F0B8B6B5780F8F13EE3
+:101C400093CFF7EFCC5581FE394672F059D57F7CA2
+:101C50000B3F4FD5D7CAFDD20F2DE2798134830ACD
+:101C60005CDFBC7D0AFECED854F4DB77DD8DF98EC7
+:101C70008978CDC4FC3239C61F1BD4F32B787AB2D5
+:101C8000828B655C7797DCFCFECD9705DF1C14F733
+:101C90002D44DB23FE3218DFCAC2786FE6ABFE07A5
+:101CA0007E1E609B1A8F1165BCC610CB078F3B6EE2
+:101CB000C0F5B46DA1A30CD7D3466197A5E618BCB7
+:101CC0001301DE47DE3004A4ABA0ACB0E37AD0E76A
+:101CD000071DFCBB86379302789EEA1157399DCFCA
+:101CE000FA389FFBF39EABF4FCBC96D6A342E7DF29
+:101CF0001E717ACC65DCDEC0BBAE19A51681697198
+:101D0000B4B68CF6A98F783D665CAF8FE478CC983A
+:101D10009F6CCE526CB88E1D2E85EED17AC4E4B77E
+:101D2000A1DDE2000588BF1F67C8ED9947E7920073
+:101D300087BA0A1E1260228F0FF3E8D204BEFA5C43
+:101D400077D9F0FCBAB3F0D0B7D0AF9E86E3A5F058
+:101D50007E8827BBC0D3A57C37CF4B16E3A7DDF524
+:101D60001CB5C7BFCE8AB8F13C9CBF0CF358907E1F
+:101D7000074D7C5F1D273A3EF392DF7EC34F38DE6E
+:101D8000DA73F9FD4186358CF661CF55FAF71F45B8
+:101D9000FC6425D13E3BDB955D85FC91FDC6CE05FF
+:101DA000780E61C34FB8FE342CE7F1A66C8599BE5E
+:101DB0008CF34EF7DB108F89EB30EB784F1D32DB65
+:101DC000FF054658D4C60080000000001F8B0800A5
+:101DD00000000000000BD57D0B7C94C5D5F73C7B43
+:101DE000CB26D9249B0B212124ECE646201736E193
+:101DF0002222EA7209A222DDC81D233E210102240B
+:101E00001040FB46CB6B161214156BA8A86851370F
+:101E10000A142B6AA88058D177B968A95A4DABBE6D
+:101E2000A55A692254416E31B4EF4B5B3FFBCDFFA5
+:101E3000CC4CB2CF9228EDFBF6F7FBBEF86B87795E
+:101E4000E676E69C3367CE9C7366765702BBCDE799
+:101E5000602C61A28DB9EC8CFEFECEFF976A61EB1F
+:101E6000CD098C254DE1DFF342BEA7248DCF2D6235
+:101E70002C79BAB17E0A0BC9BB79BD239D77B058C6
+:101E8000C6065419EB3D197DAC9899900BF96EFE7E
+:101E9000EE7C93D67EDFE0118CF9532D9E6D2EC61D
+:101EA000D2C3C663EC9B08E4356672FD3D8BB1F18D
+:101EB000AE78C6FAE17B9DCB57C8D82E9B738223A0
+:101EC00089B1CE15CCF30C6F3FFE950D73DFE1F9B0
+:101ED000FF4A77382378ADB423CD6D05FC3BDBA7F3
+:101EE0000F46FD2D16FDE9685EBEE5687FE6D71852
+:101EF0008B886675AD1C4F3613D391FE1D7FD7625C
+:101F00001C2B8D33DEC527359231DE45C094F2CFD0
+:101F1000A7AD0307E63B3DE8CFDD66E7FDB65A9C7B
+:101F2000F9169E1FF9F4630F59D3310F0EE3189A77
+:101F3000B6978D66ECF9C37CDC013CE77FF2A189A2
+:101F4000165E1ED55DEE47F92E9349E4FD81872686
+:101F50008E656CE0E1D6350E2763654FEF78C8CE0D
+:101F6000F116F92B51EEE379BF0578A919D4CEE724
+:101F700077306309CDBFF177112C82D72B347B36B4
+:101F800023CF3E8964DB787EC79EB1B35DBC5E63C0
+:101F9000CC28975EC0D8349746F32F43DAEFD27936
+:101FA000996D1EDDE3B8F4FB8D126F8C798EB670DF
+:101FB000FA163E6B63F7F3C23CC00D7AB544069E39
+:101FC000017D9B1FE34CC7589553D0BC6AEFFD19A8
+:101FD0000778FA6A4C59A58BB7AF8A99980C78D2D2
+:101FE0002E32A62772BA35D899CE719596F4338DD4
+:101FF00071F806261D1EC71CE09BB6354EA4755110
+:102000004C0FE1CBB48B16A60F477F5EEA0F7FF62D
+:102010006470A1F86B4AD0D91A0E8F9FE37A1BB86F
+:10202000D319D5A11581F1277ADBD5FAC8049FB25F
+:10203000D9AD05E03A81071BC7A9B584A70E4B307F
+:10204000A297FA77C87A66BB23681EC653E75B4738
+:10205000A95F87E54CBBBDA79E3D60217CB01A16E9
+:10206000C8D1084FFE08E4E31228CFBC5E575232B5
+:10207000F89F1172D32CEC70041F97B897AF9F5440
+:1020800016A4F4498E1E47162AA5C77F1ECDF089D7
+:10209000818F9F616C72285FABD434C844F065D7E0
+:1020A0009BFA9DE0F8C93F14497058D6B340241FED
+:1020B0002C1BF4E074CBDEC0021637EAD9FA9D4837
+:1020C000443B97E403A789D178AD43B1AE36BFE571
+:1020D000D8C0E288BE24773647B16AE04B8DC7D8B6
+:1020E0001AE28780E48B2D0D4EA2A32A1F5873306D
+:1020F0008C8E09063AAA7A691707103D7BFA0D50B3
+:102100007F69F5BB891FD22E66483E717D47FF99D6
+:102110007DF49F42EDFBEE7F208DFF64F0C3F8A9B4
+:102120001C153FEEDC1DEFE369A4B5D9E7E905CF47
+:1021300069B71BE5E4B07D46B9ABF01269F52695A9
+:1021400071FC47DE61F2B4F0FEAE386AAC37D9FDFF
+:10215000513CD6634FFD60D234D4AF15F5AF3A6928
+:10216000ACEF1BB727ACBE80EFDA8BC67AE1F4097F
+:102170008797C3D56F46085C13EC1186F6B32B2EF8
+:1021800081ABDFAC10B8AE4B31D6D7D7F40ED78DBC
+:102190007911DF0A97AAF7BDD197572F7C1ED32656
+:1021A00047F48177517FD6ECCBEBF796EA6FAF77A8
+:1021B0005B7DF8387EB95FF1B5C5D77122FEC19756
+:1021C0004062BDC91BC9F75127EB6458475D725D7A
+:1021D000253027AD67BEF035ACAB0FF0CF54C686C7
+:1021E000B87D5F437E4DB07BCB1FE15527CAFD8A8A
+:1021F0004DE13D5E89CE7D8537175ECA7F8CAD256A
+:10220000B85ED3749DD13E6BF76CE3EB3B3F8DD949
+:1022100053B91EC052029937C73016ED56F29A8B49
+:102220001A0EE75089BB1706B4AE8CA7751E48007E
+:102230003CFFE8B8FDDDDE0477BF9EFAE1F57AEAFF
+:102240000B3CD96CAD2B006767ADC383FDE1431434
+:10225000F176CFCE8C089A39BECE5B1DEB352E675A
+:102260008E46CF7BAB1FC7C307B1BA0BFDCF9E75A0
+:10227000FD3DC86B07135D2B397CE72BDA4701AFB7
+:10228000DE683DDBCDE1A8B1EB8392F914CFA6EB7C
+:1022900083E3805F5F22E195FFA3D0D72BFC029EF2
+:1022A000899AC07F629C5E8871269ADA9EF2E19BD1
+:1022B000A56D14DA31673F82EFAC8DCBBB5ED6BF24
+:1022C000C2C378D9CF01ABE7EB4E3EBF031BE33C63
+:1022D0008D1CDEAAC459F396F3A205265F72D06C5A
+:1022E00080FB2A8C57E3A818940AB8AD126E7B3F86
+:1022F00089776FF6B7C1DD88F1B0AFFDBB16D8E6C0
+:1023000016B444FE157F7CE07E9E8F305DF810F29F
+:10231000A3B3D0E4E17B04DBC2F50B3BDF57DE97D0
+:10232000F87E92AB3FF604FABE1EDF53A244FB9444
+:10233000474D8146DEDE37FE55A2D3B3CB1C1E339C
+:102340001FAB82B96CE0DB4AE6B501FE3F8EFBDBDA
+:10235000EBED7C7E73DCFA74CCE3B64453C68704A1
+:10236000879E5FC6F98D8D15F8FF2E7E606C838980
+:102370008D62EC66A91F2C90789CC6BC568C33836A
+:10238000E9568CFB9B73362FF4D2DF4007E5F0CE85
+:10239000627EFA3E870528BD8505A9FEADAC9DF29B
+:1023A000BF8E2E4AAFE7F0953D363807EB3104EF8C
+:1023B0004B24BFDC9624F8E58BFEC0FBA67E97C5B8
+:1023C000BF659AC0DF10B7BECA4DEBD595E4014C8E
+:1023D000CE09037D3121EB67623FC17F1667CEB71F
+:1023E000AD9FB6AED822368CE4812395E3E13A491D
+:1023F000CAEBBC4BA760BE902058AFDF93EBB5D4BF
+:10240000EC60499C2E6D2E732082C33279DC8A14D5
+:10241000CCF7176BD8AF8673FAFD629C9935524D95
+:102420002FB59B2AFB9B3A70D229E827EFB260D2E6
+:1024300008DEAEF4A27E388EE367AA796713D7B8B8
+:10244000D9E481D6CFDA43E4DAF549BB2C8CEB2F03
+:1024500037641BBF4F29E0F910B93B95597ACA3947
+:10246000FD0F003F903BACD90CFE7DCC1D93047D4D
+:10247000850D6543C5F9805323643E5DF66F6CE7B7
+:1024800079BBB7DDFA53E0A395F1E7E691DE611180
+:10249000F359F69E99F4CACF1A18388F9DE0FAA125
+:1024A0003797B1CFB97E81FCC986144ABFE4FA00E0
+:1024B000D2330D79547EAEC143F9AFDCBE9F804E5E
+:1024C000F3D77F65C1BE746FA4C2B7806395E4BBC8
+:1024D0007BD3473DF6578ED77BDFE50B83C353DDB8
+:1024E000DA3C0960AF4AFF6C2DF4E755CF691ED482
+:1024F0005BBADF6B737078161CD6EF019917BDDBE2
+:102500003E1562A216FA2BD71BEEB3FAF660BC9109
+:102510001F9D48D67905EFFE8EB71279FD2F1A461A
+:10252000135CA71ABC04D7E986C9944665FA5E43D2
+:102530007D2FFBCA86FA37EDECB0A4F1FAA55ECD8B
+:102540008BF5788D9705021C9ECD5621DF3773F9E8
+:102550008EF539AEF0E6276F6790BFFA9B683F2390
+:10256000A1B234917F9F3ABAC2827AB3BEE632CD2D
+:10257000DDC387DFBD0E053E6A255DCEBEA1119E7F
+:10258000CEEECDFFDE55BCBF378E989999C3D57579
+:10259000D14470751D8D0A406955F556EE31933E54
+:1025A000B932DD1600FE56EEC9EF0F7DEA34A71BE7
+:1025B000CBED19EFF40BFFE6D243E4E8E984D6FF54
+:1025C000FA1872EA5321A7B8BEF9F913906303070A
+:1025D0007840F77356AE9703D1AC2E1AFBD8329BD6
+:1025E0005C5F5CCE207F3A4A9C8347BD98361EEBE9
+:1025F00005E3B96C3D7228F7C5C7327FE0EA196F71
+:1026000047EB828F9FE0F9B30193DFCAF799B3AC30
+:10261000F5DCCF2147B73A3C381FDCAB7178B08F7F
+:102620006E1B40F93CCD12554FFC1CA0F59AA7B982
+:102630002CF55CFED4FCECF101E0A7D7380E46F394
+:10264000F2D73646937C7ACDEA39568FFE9E14FD3A
+:10265000FDE487777EB60FE983B5257702C999092E
+:1026600084EFAA1F2D1E8AF67C9F66A9BCBFE75F78
+:10267000D182917C7D166E3AB03695C3376C4B870C
+:1026800069004F8BB76A8D48F3D36F3862E6E5F681
+:102690004C17C1317CA7DB9C86653520F0F1B5B4C1
+:1026A0007F1BF7F5824D5F8DC7F152EDEF43B5D635
+:1026B0002F5B701ECE385AA213FE9AA99F3DFBA72E
+:1026C0007D700BC33CB8E600B82B6C1EDA4F02FEDF
+:1026D00016D0F9AC9EE7B91F6BDAE77F1CF43DAB6F
+:1026E000277BB0BFEC35F963C7A0FE310BCDF39566
+:1026F000ADBF8EB5F27CDC6E2B8BE4E5B5C59D934A
+:1027000050BF36DD45E7F0F4A7AE9B0CFC2CDBBDDB
+:10271000A785FAA9B17B34ACB33D17DE4AC379E88B
+:102720007AE6C901DFED16F907267A3DE0B7EA96A9
+:102730003F8B7C9B8FF23EB3DF6D41FD4AA1E73CAE
+:1027400026F731D65E44F28E58D9D543AF0778319B
+:10275000CA37BBFDA9758E9EFD8FEF5BF999BC3C16
+:10276000D526DB3BA765F8FE817DCB26F721D5DF9B
+:102770006336E68FE4FDA4F3EF1AF6559BD86FB7E6
+:1027800071F9027E51FB2D1FF7AA4CD1DE0B39994E
+:10279000C637D7623E9FB4C72202B4A75FE6F84AA5
+:1027A0004F5A1E25E499D23F662736BEDECEF1FA97
+:1027B000A758FD3ACC6F81DCAF99C59382F91D8F84
+:1027C000F54EC6F835F6CE0CCC81EF8753905F6698
+:1027D000E6FA535688FE64BFBCFD3022CE7B33DA66
+:1027E0005F6EFDB151BDCBDFB15DA349FEBE2EE5ED
+:1027F000EFAA3F9B5831CFAF7A2482E409ED69BD3F
+:10280000E0E575BEDE752E5FFE0376039E5EFDA7D6
+:1028100076339D3F0E9B6ADEE2FB290D9D89FFEB1F
+:102820006C8C1B41792FC87CCD9F4CBD9E0F55CA27
+:10283000E954877979BF36DA1BAEFDDA69A3FE1D4C
+:102840000997355F731FF335C78AF9EEC77C39EDF9
+:10285000567D5542F272FF65CE333DC2BB06F40D84
+:102860009F0787FB5E7C0F87BB9BBF3B2F0FEE3B19
+:1028700034E637619D7D650B609DEDE76062DDEEBE
+:102880005F5C10C07ADE6B13797FAC8DF4CFFD31C5
+:10289000CC0FF9B1BF2C39E077430E32A19FF6631C
+:1028A000A23C52B69F934CED074470FEE779764BFD
+:1028B00094ECBFEE9D4294AF49F37008B87E1B586C
+:1028C0009F49FAAD99EC8647A5BCDE141FBCC5CC68
+:1028D000BF6FFA2A97619CA32C98B61CF5AAA3484F
+:1028E0000E6D8AF7A626703CEEFDC64CFBC2A662B2
+:1028F0009E77909C26FBCEA6326F6A3CCFCF957414
+:10290000D9D412D8F628FA2BCBF3F8F93803CCAC8B
+:102910008EEAB9453F1F5B45BBDF49BAF0754CEB0A
+:10292000FC83CCF941E0599F1A6D815D84633C556D
+:10293000E3F03F5195C3485E4ABBD76C4983B93D2C
+:102940007CE0B58F825E2BFEE62CD81609793CA37D
+:102950003A92EC5247ABD7C6B8F87833747330026A
+:10296000FADFF45283DDE9834C2F8DCB0F16F29CF6
+:1029700010AC041EDFE8B433C8E5BEE859DB3A2EDC
+:10298000F144083F54DB84FC3829F5A15763F4F780
+:10299000C0EFCBF75D9F782244DFAB5A509A4B765D
+:1029A000DFAACB3BDF35824EC368BDFA4DE08FD640
+:1029B00048A2FFE49BED44EF2E87E919D8256F93D9
+:1029C000F2AA110761FEBD714F44602DFFB63C2293
+:1029D0003813F28AD3FFB9EDA0EBEB9144FF1A9BB9
+:1029E000E0A79A9FE7137FEDB579DDEBD0FF1B11D0
+:1029F00044F79A58571C95BF9DC824FF91DE501389
+:102A000015CC8DE7F85C1FAD9F02DE38DF913DB835
+:102A1000C626BE1F937C758CF70138FC7531C48FB8
+:102A20004CE6F51F24D2798AEBA3C4BFFA43F9948C
+:102A3000D76DDED405581F2BA309BE63D29E76AC9A
+:102A4000269EF8BBFCA1A5EF324ECF63BEEDF7E5A5
+:102A5000F27AC7F65B3DD8977E5F6F0EDA385DCFAE
+:102A6000AD3E3E6A33CFB7AFFD24430FB1A395AF60
+:102A7000AD9D8276E54B564FC57ED917BECB6B22F6
+:102A8000B8CCEDA1535296D79CC5F1EFC9D26D5980
+:102A90007C9ECB0BDA1742EE9DB3B53D85F3C1C7E3
+:102AA000717A24BE9F7FF58BED240F2D9DB9D0CF79
+:102AB0009759381F802FE5FEB95CF2E54B597A1C17
+:102AC000EA73FC913E1E5DD026E4DEEACB93F35F11
+:102AD000EEDFB657E3E32C8DDABF8C5273A008FD0E
+:102AE0009CD682B15A16F0C7F538DEDF196730166A
+:102AF00074D0E5B969E90EE3BCF007BBCA52FC83A8
+:102B0000B75BDA6A26BB0ADFDF6D807F292CBD0642
+:102B10007F82902BBC9F67681D3A7E3FEF071CFFAA
+:102B20004B9E1B52027D7269FCBE1F5E45F5783BD1
+:102B3000C5E7E64BF36A3E97C223E67746F2F919FA
+:102B400026E5E06C5BF7391C7AD0B917FA1BF8E67A
+:102B5000DC734328FFA5D6A94571B8CE4979C43C9A
+:102B6000ADA3CA7080F0B68E823EFBA8FCBE34B125
+:102B70007514E48F9247CCDE5A44E7EABCD6229C17
+:102B800027953C63BED65CFA1E68CD45FBBD266129
+:102B9000A7A03FCCFBF9B416C2835DACC725CFE735
+:102BA000135ED438E1F40B9FEFD42CE11FE0F0DE8C
+:102BB000E6E3F5076FB619CA87048CF999B2FEA04F
+:102BC00030BA0C30771E8880BC7F96D17A0D1FF703
+:102BD000D62C614FFFE94FBBE96096E745E652F41A
+:102BE00077097DDB0A7CFFAE1BDFB7A77179BA14CA
+:102BF00073CCEC99FFDE623D0D72FF9C49D8A9F7BA
+:102C0000C6F37C01F41C814F9557780CE7A3B5BF40
+:102C10005B98067FCAFAAC6E3F477FF05B23E425E2
+:102C200097178D56818F2F1BAA879FB0E03C5A972C
+:102C30005A65E999CFC2CDC576AC97455B8AEDF36D
+:102C400043CE3B8D3B861F7171BA9CD96121B34144
+:102C5000A325F043E8D18D3BCCAD7E46E5762FAF82
+:102C60007FC671F03DD45BB825BE047AAF6ABF68F9
+:102C7000F31DA95521F8CEDF61C47F61AB310F7B15
+:102C80007468FE47D00547FEE3ED8A83C6FCF02357
+:102C9000C6FC171FDE3E136CFCCA68C1EF27033168
+:102CA00001F8A9AA3F997404FBDAC9BDAFC4823EFA
+:102CB0004B3FAD7A0BE796459B8D7CC6E9A641AFAD
+:102CC000F76FD7883F1607C2D79D5CEF97ACC73523
+:102CD000CAAE9917CA27E1F43CCD5A677A393FD575
+:102CE000D4AF1C0E7F48F514CEB81C9E2B5B37DA90
+:102CF000E037081FAFAF75CF1C5E17EC5515A34525
+:102D0000D998FAF1EC388CBE1B7E3D09EBADE2019F
+:102D10008DF6FF8A97071F86FCEED835E7064A67CF
+:102D20004E263C28FBD9A2FD5A3086E79DA35DFBC9
+:102D3000DA79BB05018DF687F94D113D7288FFAF39
+:102D40006A43181C9B42CA39FC8BF61DF88BC6FBE4
+:102D5000AFDE626CB798E30B727FC9D6BF47847E43
+:102D600057E7BE31FB5BCC98F70205BFFF1A8679A7
+:102D7000091724171D525F39810C97F71109BE36C8
+:102D8000EC2F633689765C605560BEB50E9B0BF305
+:102D9000ADB5B3603487E3488CCDEBE4DF2F6C8EA8
+:102DA00021FBD4C208AE179650CA224BD0CE43FBAB
+:102DB000F4E7EF9B495FA9C5D8E8E7698DCE3FB539
+:102DC000303622FFACC82F66419A07F8C51B3ABFC0
+:102DD0008031CF9AC5B9A9C6123C007C2C61EDE2C6
+:102DE000DCC3E9E80DF1C7D5F0791E4D803E646C77
+:102DF000BF9CB552FDE5FBFE1E11FA3DC44E4AE7ED
+:102E00003975AE34DB9817FAB1F9EE28DAEFB9204C
+:102E10008E027FAED3BC8FDBCD48C5BCFC1B85FECC
+:102E200033B745EC175C3FCD057E366D1CE2819EC5
+:102E30003297EBD991D023164751BD4DF18CEC2B35
+:102E40009BE6E40A3DFB9B978318A7F3118DEC23C7
+:102E50009B8A45BF9B1E1C42E590871A8D13417AC1
+:102E6000CBA632559E4E7AD2C7002D157AAEFCDE27
+:102E7000CF45DF0798BDB9D0D7D9C39174DE577A53
+:102E8000EDB3097A6C76BF9EF92A3D98555F9EFE98
+:102E9000B74DEE779D1B85FFF784E67BCB14A29799
+:102EA0000ECA16FBC3A8F1DEEDB21EF901AA4C65ED
+:102EB000F75FCBE1A97AD4E46A74F7E09D79BDB9F4
+:102EC00098FF898D9125E0B351E385BDE758B19016
+:102ED000DBD1239837C0D3BC6CB17FE4659B0C6910
+:102EE0004A14E73FDECF8952611F8E19E1233B1B55
+:102EF000D7D9487E87CF638484AFCAE67BFBEA5E7E
+:102F0000E0E9E6838942CF38B1427B46C0C5E9CAD1
+:102F1000F3A37E1449F6B913725F51F8E77C33923C
+:102F2000F66929AF364A3ED908FA633F5B2CCE4199
+:102F30003D7C62E483B99AC02B7B50E8A79BE245B5
+:102F40005EF1013FEFB0BF824F4A19E1BDAF738F11
+:102F50009AE7A61651CEE93D05F40E3FF7287A33DD
+:102F60004B6024CE8D7DD17BFEE8F8519A89FCD64A
+:102F70007EF8ADB1D7115EEEB304D67238065A04AE
+:102F8000FED32D82BFB854F64795507DAF8DE72B09
+:102F90001E5EC4BCBC7E451A237B10AFCFE2509F9F
+:102FA00077833816EC1568571127FAADE8CFE89CFF
+:102FB000407F5C5E6523CDA47EBDA604D13EB68471
+:102FC000DAFB4DA2BDD7C2D34159429FEF5C171126
+:102FD0007806F2F9DEF45CF0C194F1463EF88F6CAD
+:102FE000B1DFAB74688E4B1A953C2958DFF39B8692
+:102FF000D07ED118E9ABDD03BABD20F4FF8A7B6E29
+:10300000BD6924E07B31D103F0BE9CBA8BFC0DF38B
+:103010009BE6DCF111CE0D3B22E9FB7539FA5DD957
+:1030200023A107BAE6EDE11FE6CF38644BE1EDF5E9
+:10303000D6B2B33FE7E954FFAEF7A00F4C9D6EA6A2
+:10304000FA5399B08FB22631CE4DFEAF2C29BCBFBA
+:103050009BC66A1433D011E9CC58C1E1AF90F4BBE0
+:1030600047F26F63249BFD3307E04ACFCDE4DF6F67
+:103070008286D98BFFEAB0AA3F4EDB02BD66D00440
+:10308000B1BE547DF4837EDF96EB69A3C48BCA7313
+:10309000BC52FDAAF5111D59B148ADC1C13CEDCCE2
+:1030A0001DFF08F86A4A269BB41978BFD38C5805CF
+:1030B0000E6F6705ADFB985C17F854672C48F1114B
+:1030C0008121C4D71DE33A3BEEE5F98E96C11EB2CD
+:1030D000F9C873F4029CAF5C2817724CC99763CE91
+:1030E000F618E25779AEAE94ACF1C7FA098F5EC11B
+:1030F000EB573A6C1DD80F163C322D167126959B56
+:10310000CC229E6383F15CCDCFBF2F812EE1E7E41B
+:10311000F0F33078067C54B541233E1CD4E8B1A5C9
+:10312000921CD39C985F9523980DF95EE589F4A0D5
+:10313000FC4C8337F14436FC119329655F73BC8FD7
+:10314000823D965110C7C11C7D3FF054D15C41E7D0
+:10315000C5E8029DE4D3DFB25D84E729B02742DEF3
+:1031600058DA53B10E6BD5F70467AE83F839920184
+:103170000F1D56672EE0EA581769C2BE3965ADE0EB
+:103180006BBECEEC16DEFE3E0B8BC27ABF5FB62F57
+:103190005F63F1B5F0FC403BB3C42480AF8A89AFD4
+:1031A0004B06EB1B818793FFCE4663FFAFDCB091EC
+:1031B000E0517CC12C6D1313A1DF6D7397DCCF7AC6
+:1031C000F8A864F0F80FD0AE9B1FA66BC4073C3D77
+:1031D0009045FC70F351944F191FCC5E59003F5637
+:1031E0000DF3C28F90C23CB00774B14ED227BAB86B
+:1031F0003E0179A6E489921B9C0FBC88EB51F455E3
+:10320000F2637B030789E37547839DD29F36389924
+:1032100085CB809D0D29947FB1C145696B431E7D8F
+:10322000FF598387F2BB1B46537E6F8397F2FB1ACD
+:103230002653FAF3061F7DE7782139A4E48A9247E2
+:103240008A9F945C0AE7A3791CBDD794507B927B3C
+:103250004ADE611EA6921E79A4E89BA9F9FC296E9C
+:10326000C8B1F6399017A5E6332FBC023B49B5C368
+:1032700013E1025E84DCEB72D849CE67D8D83E9C5D
+:10328000D71B57783BEE0DD9576FA9D69825844F99
+:103290006FAD8B6496103EBEAD3EDE902FAFFFE06B
+:1032A000CDFEBC7F2D5E77E470388EDDFDF993BFD7
+:1032B000E5DF9FBEFBCB1CD09BC3B1ED318CBB3A8D
+:1032C000AA1B8E04E49BACA43F0C8A12E720FC816D
+:1032D0002EF399589F4FDFFD575ADF1DF5112E33FE
+:1032E000AF37BF3E82F0F531E8C4F1FA7B49A78AD7
+:1032F00075C75F7805EB7CB58DE4DCFC26B92ED76D
+:10330000737C86E86B9FA532D2CB342F63F0C37CED
+:10331000F6EFB620DFF3D9679A3DA041F7E187A425
+:1033200072FE5D5FFF0B8ABFD2EA8F903EAC232E08
+:103330000B7602BFD5108FA5D5CB38ADF681863878
+:10334000AAE8115E1BE403781A749B9F7790615D75
+:10335000B366CD892DA04A7EAF5AAF91BED1AD2FB5
+:10336000E498898E75D9164ADFC31AA7FDA299F68B
+:1033700027C5AF5C5E78035817CDC5B68521727836
+:10338000BEFC5E9967A2547DAFCBB6513FEF41388A
+:10339000F07EEFCFCBB42D2039E7B2410EA8FAF37F
+:1033A000F34AEEC91C817EC625B190F5E8CDB15037
+:1033B000FB3A047AE17C6417F6FF9A3EF601A59782
+:1033C0009CC43FAF24F8E9BCB5E4C5E75F847F6CDB
+:1033D000C9271144A725C3A43DA220306A1AE933A6
+:1033E0005E87C6E7B94CD27FE2F39FC6B6F3F2E53B
+:1033F000BB85FD92A71D4897ADAE26BBD6320F5FA9
+:103400001F0990AB463FF2E1173F896DA773853FD7
+:103410000DF1857C5B486329F0171D9F04BBF87292
+:10342000D6790FE2BAC2DB2DD7BE8E15F67DE12725
+:1034300057FECBD2D7FF9C4C70ECB9900CB9B6FCC0
+:10344000F575C97A2FF35E1EE6BF567E7365075B7E
+:10345000CE367C05BF5B78BD9539D2AF7D05BB828A
+:10346000EC141646710C2BED020F5D819C38D6CB07
+:1034700078DDE36EE6829D9F43BB2CAE380F87F369
+:103480007C1F717CAFE488FDF9ACF4A39EDF692654
+:10349000BDF0FCCE18E2FF653B1F7EEB2A9E5FB6B7
+:1034A00055C3B0AC96B5119E96ED36337BE8F90660
+:1034B000769BC4BEE15CFA7C4C1DF86971ABE6DD1D
+:1034C0005600BFBC2BAE5FA8BE28F9696944EB2843
+:1034D000A28384FF7EA91FA97A8BF73F6C03BD7876
+:1034E000BD73A4B7BC140D5D9BFF75BE07384F6F4D
+:1034F000194E7EDDC5ADBB96D1BEBF33DA89297EBC
+:103500006935DAA30239623D057284BE715ADA7FE9
+:103510004FBF6826F90338B10EBFD4849D57B5DB81
+:103520002EDB6D9778BB2947AC47557F716B476C95
+:1035300036AFFFC5BE0F286D95F35AEC682BC27EDF
+:10354000F9C5EEE8C9014A7F3CE9353EDED9D671BE
+:10355000495AC8BA7A3D47C40D9FDD629E0C7CB1C2
+:10356000808A336AA5F99CDE99A6D1B916F8E6F8E7
+:1035700039BDFBE55813AD5BBF6827E968B20B7B2B
+:10358000AADBE292F60BBB137AC65CAED5C57179A5
+:1035900057BB5BC403847F57F569BDA582DF3B6DD4
+:1035A00082FFA5FF5EFA97102742FEF8185B00FB2A
+:1035B000EBBC61AE59B7409EBD6315F418E87A0CB8
+:1035C000E7AA79EF2792BD62A5D5D51FF93FBD6B5C
+:1035D00025FBF9BCE1729DA7B48F847DB2C32DF6A3
+:1035E000F59AF57C85F0290FE0F4F7F3F9D5044C52
+:1035F000144F793C2793E07AA2DAE4B5919F23989F
+:103600000B3BE5311BF39BA127FF2C92F4BB9A4C9B
+:1036100061777F02FCCED39A84606E22EC5D928E3D
+:103620003537F3F2107AD63C13CC85DE72C626EC21
+:10363000782877222D11F51A25DFA01FF4DBE1761B
+:103640009E23FD724F0C839E6F7A2546D8137E12FF
+:10365000497E07D5EF05C9578DD2CFE5DF26E003B8
+:103660005CD09B17DB9A73A157AA7117C736D37822
+:1036700067E4788BA39A85FF40C685A13E8D6F6570
+:103680005E9CC73B9F8B20FDF4CBD4B6BD18FFCB0F
+:10369000E786901FBCC31D58B88FCAB9DEC6E9B013
+:1036A000E4A71141C07BEAB918F2739EB20A3DE863
+:1036B000544C32E94147621E9D87FEBAB64668B057
+:1036C000A79CD2982D05E5DBFA91BF6A49433DF9E5
+:1036D0000996F0E50E7F344F27C3AF7C6ADB10B24A
+:1036E000B39CFAA599FC8BFCFB7A7CD759F3BCBB45
+:1036F000B0EE7644939DEDCB9FFE6D48A8FF41A5AB
+:103700004BB61AED498AFEAA3C2957ACAFA45C819E
+:10371000C7945CB1CFD446B73E9A49F314EB95D326
+:1037200081CE5B7C7D24C33E7DACF5D564CD013C70
+:1037300007737F0CBCEF10E79A2F775AC92FB2E4BA
+:1037400095182FD96FEEBDC284FD628959E8BF4B31
+:1037500038BB8954D88796C4E6927D88E39BCE8F88
+:103760009DDBCC721C31EEA9EDE9C2FE1E94F9BDC1
+:103770008501F0F9940476DBCDA4DF6C29025E2F7D
+:103780006C8D36812FF8385EF8ED97DCF50381CF2C
+:10379000B885A48F33C4418F82BF5CC8CBDA7BAFBE
+:1037A0008A433C0C7BDFCC20FA2E583CFD210FC312
+:1037B000F1B52857CACBBD4FDAE03FABE1EB05F1DD
+:1037C000414BA5DF74E94F35D2E796DE73D563240C
+:1037D00007DFB3B21C0EC799D6876343E95126FBB6
+:1037E000E969EFA1FA4B797DD1FE9D588267BBD57F
+:1037F0000378C2E978D9ED7F6ABEACF6DDFCD1CAA8
+:10380000F7F5A24BE77D81B57DFF13C8919D911E11
+:103810003F7D6D25BFF3696BEB42CCFBF40B91242C
+:103820005F4EC78BF5FE0597877E1BE0B8F121B28E
+:103830006FFC661A83E85E1430F6ABC69D992BE4E4
+:103840006F6DA2270EFE8C5A4E07F4C7E9F23D6A4F
+:10385000FFBE95DA87CF63A46CD7BD3E5F88267E16
+:10386000393D40D0E3F48B83695FE988177CCEE172
+:10387000CDC039E574BC487153067CB0449E434FBB
+:103880008F6BA573F7696D17A51D56D16E49BDF4F1
+:10389000DB72BE4B01DF8027E1B7B26F68831E0188
+:1038A000FBF4A8124A83110997DA99C19FD8875E61
+:1038B000CC15F62CA83590EBE4DF20FDA4D50679D5
+:1038C000AC4B3DAE66E7A5FE32F283EED4C8EFF313
+:1038D000A05CA7803A49D9C7393F2EF56B5EC41B5F
+:1038E0002D6D5AB118FCBEB46EE32DE077358FA56F
+:1038F000163619E7AB0ECD4CF07444F275033C84D8
+:103900008E97D983DFCD0A5E809C4C7A2629D75BBF
+:1039100072C57E857C33EFAFA649DB40E3B8D5792D
+:1039200052CC4FE189A3C5063B193FE78BF23EE637
+:10393000AFE00C9FBF82A73557D8273ADCAE87C6C9
+:1039400082DEBF3293FDF4C2D7C3E312BE452FC35C
+:1039500089ADDB5ECCE17F9DEFD5E8C70FF986F539
+:103960000C7B348733778BD1FF91B7D5981FBAD3AF
+:10397000982FD86DCC17ED37E63D878DF96D725CC9
+:1039800085279C7311D786732E529C735DB9E29C78
+:103990008B3CCEB94871CEC5779C7391C7391779E6
+:1039A0009C7391C7391729CEB9F87E4ECAEF1A69B0
+:1039B00077041D28BEEAD548E507A7F5727E4E328A
+:1039C000C94FE5CF3CBFB880F2DDF69C323BD973DE
+:1039D000549CCE2D71FAD15CF21BB6DD930ABA5914
+:1039E000DAC98EBBFCE7C28E5B5312E9807DA17DF4
+:1039F000DD17F7407D2A8AD33FCDA5B8A6CEED22AC
+:103A00005E294872A37D8DEBFD6B05FDC8CEA1E25A
+:103A10006E2AB0DF25F44DC7703F0ADB60F49B844B
+:103A2000FB51C2FD27E17CA0FC264F5B3B5321EFFD
+:103A30008F3F67DF00F88F4BFB189BED24FD4BE9B0
+:103A4000D5DDFAD783DA33D8B7BFC94DA0F65D47C5
+:103A5000B8BEDDCB7EABD2CA8B25A43776E73768FC
+:103A6000268A1B4989A57D6895842943EBECB81704
+:103A7000F22EC644FBF8058789CE05173E34931E07
+:103A80003118FA79C87C8604A20CFC95BF2321CC9E
+:103A9000FF37C0507FD8BECC30FFDF50A35F6AFA3B
+:103AA0009A03385F4FDB30DC50AFCA7755181E25BC
+:103AB000DC522F6D5CBD3903F267554C17C1BF6AEC
+:103AC0004F24C5D5567178BDF0CB21C351506DF749
+:103AD0004E05FEAA5BADF1D8E72BE5FEC3EA8DFBF0
+:103AE00071B585F99D093D7C57ED64DE78DEFE6C8D
+:103AF00071F37613A7DB59D39647C7BAE0576AC963
+:103B00007072BEBA5D6B4DBE92F7F7378B5E309820
+:103B1000F35B8635F8C372C8CB5D596C0DAF777C0B
+:103B2000C3CBB1A4774B3ECBB03AA340EF966633FC
+:103B30009D0B60973227F4F0434B736254B6A36732
+:103B40009E3DF4FF9AE6C7E9E2C13DC52EC7C1819B
+:103B5000ABA0C7B58AF9568FD3FCA427CBF9AC9498
+:103B6000FB0ACB16FDDC2EF327E47941CDEFCC9098
+:103B700003452EF8311BF6659821C74D3BB7E3FE90
+:103B8000C0DD51FA758347225E32E7B763F9B84B5F
+:103B90003E12F1BA7FDC3421F64AE89F2F583D539C
+:103BA00078FEDEE6676D38172FB1046C3877563F24
+:103BB000D762F3F2F4BA1D2DF47DE18E0A3A6F2F2D
+:103BC0006275748E3CA9E26F253EAAC76B5B9C1C94
+:103BD000EE17070BB9511D25E2364ACD63DF445C71
+:103BE000FA851D5A31E63BDDB7CB5601FBB3AC1766
+:103BF000BE3EBADE9D56DA0FF6A456E1F7EC6B3DF9
+:103C0000CC08E6D17A9876D145E9F48B43E91CFBE0
+:103C100011F315929C28083BCFBE2BE290BBF68B8C
+:103C200075506D0B264DC33A79C34AEBA496CBAFC2
+:103C3000D1253827333686A7BEB16603BF2E9F181D
+:103C40006DE0E7D92CC1E0479E894B9B21F9E953F0
+:103C5000B20CF5674DCF0FE3FF929E729223630C77
+:103C60007126B5ABFD2E8DE259C61BBFF37435F13D
+:103C7000D90D86F6B5ECE69E7A38076FFD35E199E9
+:103C8000B1361BCE5BD5261157335BEF90DFDBE9F6
+:103C90003B9F88611D0ECAF2FC56EC8B56B2CB2BB3
+:103CA000BBF46CFC3BABB77D91135A8E8BF850D8AC
+:103CB000170CF1851C003A7F3241875A69EFA9CD74
+:103CC00013F69E5A7F9B0DF1B71CFF96348E9265BA
+:103CD000CD1AD9F3787D7B5A82C8AFC6F7DDC6FB13
+:103CE00006E8EF22CA8F982BB05EC2CB97F17943DA
+:103CF000CF58063B0DEC4CAA7FD9AFE2CF459B8D48
+:103D000076A365B0E784D0F1ABC12EE2D3253B7634
+:103D1000BD3580E3659A2FBE18EBA7A6B5CC5A51E6
+:103D200070299F29F97EA1DA447EEEAE770F119FAC
+:103D300075555B889FBF0B1FCBBCC29E19CE7F0BF6
+:103D4000F97CE0975DB85BF30434510F781900BE3D
+:103D50000CC34B5A2FF85278EAC65B58F922FC6321
+:103D600004E206B440D0DD1B5E241E55FF6178627C
+:103D7000A38D7858A8BBDE87BC5978C4CC02973194
+:103D8000EF45981FC6E7F3C3F8375F147612E5379F
+:103D90009879D142F96E3EF189F8E9E9538CEBB29A
+:103DA0009B6F7C629DCCB8984CEDFEB7F9E7BBF8F1
+:103DB00046C11D1E9FACEEF7FCF76069271CC94683
+:103DC000D2FABFCCB861B5DF2B3C0FBA7B34C51338
+:103DD000753932497FE8DE6F9CC6F29531991447F8
+:103DE000AC4BFB9C92BBBAACA7C6A9E0E5AEE1E048
+:103DF000E381C9B0BBDED39495D11EA297E8EBACAA
+:103E00006437CD5893486945A43319FB45C51AB3A7
+:103E10000FFBE067F7F54F1E0D3BFC3A6BD214DE4B
+:103E2000F567778EC86085C897527A7C63C4EC507A
+:103E30007BB64A5D79623FA8BDFB28ED5F674DEF19
+:103E4000C6CEC63A5BB7271621354BD77D30CAC9D7
+:103E5000558F168B3E280F71845ACB7627F0E66C6F
+:103E600029823D7A1868D7AF474F58B2AEB43FECBD
+:103E70005F35DF1C7A0AFBBBBEC69A0C3DF3D487C4
+:103E80007CFFD368FF22FDE024E28F93E0B78AA68F
+:103E9000FB6D2735E685FF66B1F94091D3B09FEE03
+:103EA0009F09385E8DD287E5919F36B03D05E37B53
+:103EB000FC142FA9AFC989EBCD5EA2D2E59B85FE8C
+:103EC000B65DD96BA55D177A3BF2D0DBE11482DEDB
+:103ED0008E3CF476A4D0DBF1BD4CDAEB07357616D8
+:103EE000E3DCE91FCFF2EA687F75E4412F5FA54567
+:103EF00079206F56699EFEB083B1ADA9625F0DA3B4
+:103F0000AF4AAFEEE4BA5508BF5F7BD1CE42E3C7FC
+:103F1000C6B178437E823DD550BFD4E936945F97D1
+:103F200032C4507EBDABD890BF31EF4A43FD9B3CBD
+:103F3000E30CF9EF8DBEDE50BFCC5B66C84F9B3CF7
+:103F4000C7507F86AFC2503E6BF66243F91C7D8539
+:103F5000217F4BF59D86FAB7D6AD31947B99D382FC
+:103F6000FD6D3FCE531CEF6FE03CC5D355BFCA710A
+:103F700084D275EC04535D6FF6F8EF4BFEDD3CC464
+:103F8000BB02FC992EEF81A4CBFB1C4D792EE2CF16
+:103F900034DCDBA7F36C5B2AF826BC5E78F9D8E842
+:103FA00083175C9C867FD83173BA85CB87B1571C49
+:103FB0001C9EC5F309431E986EE17265EC55075FC0
+:103FC000CEE4F90143DE14E5C30E5E40F903431E5F
+:103FD00012F9698C548BCC21E3A7FBF93CC65E9B9C
+:103FE000B9C123EC21BDC65BAA147840DC22F08065
+:103FF00034C8F913E941CE9F480F73FEACCA66EC92
+:104000002DCE9F488FF07325BEBFCDCF9548DFE5FD
+:10401000E74AA4EFF17325D2367EAE44FA9B86D9E7
+:10402000947ED8A053BBFF6CA8A6F468431D7DFF07
+:10403000B8A19ED2DF37F8E97B204FD90F826467A1
+:1040400051FEA465F0E3C10EB7CF7A26D4CFAAFC07
+:1040500081CAFFD758C7DAA3B14EDB2DF19FDB7BB6
+:10406000FC7A7DCB590BFB3C44DF6A89F63E9F47C7
+:104070007692814E92D7F2FB786D5A7A094FFFE221
+:10408000D27781DE334A2AD7C5B9710FA4CE0A7E12
+:10409000F9C8D4FBBDE0A63C617F5839C4BB97F892
+:1040A00044FAB1951FB93B3E25C4CF6D0A898BA157
+:1040B000BF90F816E56F56F134D7D8457C9EF227AD
+:1040C000ABB819D55FE94546F2EEEAF516D24F6274
+:1040D0002C2C88FE557CCCD5F6D662C40B5C5DE3F7
+:1040E000A038B4FEFCBBAD84EA79CD3CDDFA675E56
+:1040F000BFA8C77FDD5FC2CFCB09FED28B3AD95DA7
+:10410000AF96FE7BB4B78B723FDA23760A7A064FFE
+:10411000C9AEF624E29C4A7AFCE9A81F2DEA07D131
+:104120005FF67FF1F1627BD64F7A426B31E2A9D222
+:104130009739289E6ACBB820DDDF5AEED63F039D23
+:104140007C11CE4FA369FD64A5C34E5026F5DE6FEA
+:10415000A1C31768A7F0A3F0ACE8A2F01B12774444
+:1041600078ED8B4EE1F409A78BA247E9C51E3C030D
+:104170004F97D2A1874EB0C7FEBF4287119656BA5D
+:10418000FF175163F700AEEFA2CB6D9D6C12EE13DB
+:104190000FCED49B80E78A8BAEB790AF64E32661E5
+:1041A0006B52E59EEF289F85F27E7D97DFD147F920
+:1041B0003B912A1EC1EB28E6749920E5C7AA5281DB
+:1041C000DFC96E33E17742C122D2479943E8752EA9
+:1041D000FE1FE4C9A4AF7D4DE86F5292513F54FEDB
+:1041E000E01B647F93C3FCC03748BDF18630BD70CF
+:1041F000D410A9F7B9995B9CFBC43DF789729F4E17
+:104200009374CEE287F9B1A023D32D105A8771CFD2
+:10421000BD08F7C0FD94BF9E0528BD910569DFBAB2
+:10422000890B38E4BFC718C5331E8A9E5ABE9CF757
+:104230003761F8846C7C0FB9D777DD907E74AFEF6F
+:104240000FCE907B7D0727BA486F3868CF223D0696
+:10425000EBC01A6247FB2597FB086538C4F705A435
+:104260006FF27D219B33F92FF8BE80FC0D796B181E
+:10427000DA4D7219E34D54FB1B9DE3996578DF72AB
+:10428000F7C6A25707C2BEF24EFCE089B03BBF138F
+:104290007FC544CCF79DF8FE269146D8282D7C2575
+:1042A000BB373D4BF161CF78939825F152FC2A7CC6
+:1042B00086E351E1F79FC0E78ADEF0D9041CC0AE67
+:1042C00067FF20362513FE2FB1FE6B5F29EC0FF838
+:1042D0004F0134C425DB055EC2ED3B5F34B081C0C5
+:1042E0002FDB1A47DFEF903C7475FD18AA7F4DFD58
+:1042F000689ADF5551FADA217C9C3325C15CAE39CE
+:10430000B02FB634D2FDDBB32F9A3DD0BF6BCCAE0D
+:104310000D1EACF577C47D39F6F5A10CF8DBD8D6C7
+:10432000DEE3766BEC0A6F7EC2A737D3DB24F63F61
+:10433000718F58EDBF032344BCABBACFDAD77E3CB4
+:104340002A4AC8958111420E2A3AF176944FE3FD2C
+:104350008CE27223EDA128D2BF4724781F073ED5F7
+:10436000391AF14DD8A7AE09E6C7213F19E7499E92
+:104370007F5BDE4F7B7B685D5226C7F7219BFE2C5F
+:10438000DA31F3D766ACEBC61C8DEEB9771DC94A9E
+:1043900002BEB7A97557C48A42DF1B50FA71F7787D
+:1043A0004966F28BAF847F3409E7263BD98BAE6137
+:1043B000B9E4379D28C72FFD6525BD83A0EE7D4458
+:1043C000A4988CEFE7B8A20CEFC144E72518F231AE
+:1043D0009E0186FA71A3330DE5F1DEA186F2C4C910
+:1043E00025867C3FDF1843FDFEB3C71BDF75D36F07
+:1043F00030D44FABBED99057F22B4D7C62E9757328
+:104400000DED07D5CF37D477FB9718DFB7F17BDBFE
+:10441000F29221F7C45FD6FA9586F21FC78A7B0D08
+:10442000931D0BE9BD8A9CE6BB8CE34B3AA5C509FD
+:104430003A319790AF7EFE1FF8A634C5286F273813
+:104440008DE76DAE0F6AD8DFD3EA2C86EF9FFD0FA4
+:10445000E91C8E972EBE3505511FFA10CF5FA30FB2
+:104460007D08768D8949564F80097B7AE8BC604F7C
+:104470000FC503ECE9A179D8D38DEF4219E90E7B82
+:104480007A68F9F02346BA8F6C33D2FD8AA346BA14
+:104490002B7E0CA7CF95ED467E08A7CF5527C3F8F6
+:1044A00043D26336FFEFEFE29E34D16B9243634F0A
+:1044B000B8FF79FA240FE5F4C9EFA1CFFF49D35330
+:1044C00087F6C3FDF40B1936D0AB53BCD7B742CA3D
+:1044D0004F154FC8CFBBE23EDD5D66F2EF1F3335AF
+:1044E000D37B49079DBA1BED6F2BA8D3E03F4861F2
+:1044F000BE5D0B397CF3FE2382FC09F306897B9DAC
+:10450000ACA09DE2EC959C9B9726E258860C95E723
+:104510000B8F886729182AF4C2188F93E25E2B0A42
+:10452000C43D027E2CC8985708FE793712EF1676E4
+:104530006D12F6FB76ABB85FEAE77C04BF18F44473
+:10454000E871E9528F6AFC9DDD0EF8076F66867D83
+:104550007148C06E88BBCCDFE134E40B5B530CF5D3
+:1045600087ED7319CA8B837986F2E1473C86FCC8D4
+:10457000B6D186FA571CF51AF257B64F36D4BFEAB1
+:10458000A4CF904F639D8F03BF8334711EAD1A2A51
+:10459000E278F81A227FD2BC7BE3C5FD41794E5503
+:1045A0007AB08AC7D525DF85EBD3836C3AC5F73659
+:1045B000A6320FDD03B0CBF30933EAD9BA8CA75585
+:1045C000FA28F31BE369551C6DB73E2EF56FA50F56
+:1045D00087C4D17A43E368E7C97BBEE1FB5E9DA453
+:1045E0007B38FC836C62BE8D77DAE8DE82822B1C1E
+:1045F0009EBFC9F8CE6DF6DEEF8FDC3D54F8DB7F51
+:1046000099E5FB3EF8F529888FACDEC6F3B4FB399B
+:104610007F35FEBBCDB3D6F5DDE3CD1B26E6536E6D
+:1046200032DD565640714BB37F1632FE0FE5B8AB04
+:104630000AB45EE7372F4EC415B1389B0BFCDBF78D
+:1046400078029F2936D644F75C64DCF9AD1B5A1F0B
+:104650008489BCDCD66C15EF9705ACE08729E3B9FB
+:10466000FE540CBBD5370F3BB89EF154BD85EC1002
+:104670008F0CBD69863FBBE71EC1207EBE007F4018
+:1046800057C1B9C45E20E266F70E15EBBFD4FC75C6
+:1046900077FC37D9D31993F25B9C5B7AE137E2431D
+:1046A000358F7F751C78389ED4B990C97D275BC241
+:1046B000A5F0D77D8E97F853F1F8AE1556DF330E7F
+:1046C0008AEB9F8C782645BF8105822F4F0E15F40B
+:1046D000463DC8A3BEEA959A0BE260AFED62AE38E4
+:1046E000E7B7D823FF557851F8EFEB7E4F5FF2E143
+:1046F00012B9D0C77D9FBEF893FEFE817B3F21F2A9
+:1047000041C497487A04B24DE4CFBD37C6B88EFB9A
+:10471000E70BFCEE57FB859F9F278D7282C1BEDCA5
+:10472000B8CE2CE584D857A16FE0FB827556D237FE
+:1047300058BD8847AE96B298315FF29811F0C75ACB
+:10474000E93DAB6BBC8CF491F90E5BA085D7AFF063
+:1047500087EFAB5E6A4FFE1A17DE2DF1DC03FB7BA1
+:10476000E57A63BD450EF1AED782B073E922792EAA
+:104770005D14762E8DCC97FBB28779486F92FE67D9
+:104780000567375F05B2282E18E754B3B09750BCC1
+:1047900052B71D1FFE85907734393EA3F2B06F37B4
+:1047A000597A8D23EBC6671F7EF233F093BBB0FEC0
+:1047B000BBE8FE4FD7EE48E14753FE0B59FF8CFF95
+:1047C0000295A33E7A3B5BDC56043F52B7BF23CC35
+:1047D0006FD2E530C58E467F3BC5FB0B2A0E60C904
+:1047E0005F0345CE103FA7DE6E32C45D84A7FA9A00
+:1047F0003D1417D062D14BF2F93C4E5B3C76BC17AE
+:10480000799FE36032EE6B4F91F69A7078BBF5D0EA
+:10481000B19AF013FA851EDA3559233D94CB4586BB
+:1048200075A4FCD9652C988454F90FF4F5A309CF2D
+:10483000CA7F50111C4D70CE685C64C5937DED8FAE
+:10484000AF2E8D72F5F815DAD3453C4A5FFE8569C7
+:10485000173DD4DFF48B63A89FB27CB7B8C7D5F4FB
+:10486000E00AF0D1D01DCC8A79B687C563ABF4409D
+:10487000BEB07F1FCB57725BC6B9ACD1849EAD3141
+:1048800015F742725BE52F34CB7CA9C8AF5A27F2EB
+:10489000EDF21DA3EDD2DE807922C57C702EDE29DB
+:1048A000ED11980752CC03DF21A790879C421E721E
+:1048B0000A79C829A49053F83E9FF9328ACDC20FD5
+:1048C000323164DDC00F3231440F821F24340F3F78
+:1048D00048687DF84142CBE107092D871F24340F3A
+:1048E0003F48687DF84142F36CF4F53D79C8356F77
+:1048F00099213F8DEBE31343D62DFC20A1FDC30F7F
+:1049000062E84F5F61687F0BAB37B4871F24B4FE4A
+:104910006DF59AC14F729BBC975EB93981F8638E71
+:10492000DBF7C37C4EDF3F447F738715E734F3FE2C
+:10493000C5747EAA8DF2083A374F1674373141E7B5
+:10494000CE3944E7D536912F1571B1BDF91B2666D6
+:104950000B7F0352F81B90C2DF8014FE06BC870D4C
+:104960007F0352F81BF01DFE06A4F0372085BF011F
+:1049700029FC0D48E16F400A7F03DAC1DF8014FE95
+:10498000067C87BF0129FC0DF87E0C7E8FEC1EB8DB
+:10499000A0B7671BCE779C0F0DE73BA7210FBD3D4E
+:1049A000B43EF4F6D072E8EDA1E5D0DB43F3D0DB02
+:1049B00043EB436F0FCDB70D75D1BA84FE1EDA0EEF
+:1049C000FA7B68BEB0D9FF266C4C376D3977186911
+:1049D0007B8CF694C645C1FBCF1F9F01BF517BA4C2
+:1049E0009611CF97BC553B356322D7CF74195F56CC
+:1049F000C43AE97D675DBE5BA30719C5C316FE25F2
+:104A000045C805756F087F9CEEC5BB199D03CAE4B8
+:104A10007EAADA7B98D34C724BD6EFC9F75E2F7C17
+:104A20007C558FE465081CFC80588C3888E2D58E54
+:104A300012C4716F3769220E72AD88430DE72B7374
+:104A400081904BDB4DBB0E4621AEA542A3F7E2732E
+:104A50002DEC08DEF12E6CAE2B81BE703A3F5ECE9F
+:104A6000AB6E0CE26214DCCA0EC8E504DDAB1ADBE7
+:104A7000C96C5505784F8CD91640BEDB849E807674
+:104A8000383FE6FB35EF3321FCFDE77CB1BFE9FEA3
+:104A90001563AAF8F7FC9D7563705F6B4A9468F71D
+:104AA00093A763098F539BB467702F6EEC4EE6C5D6
+:104AB000FDCB6FA43CCDDFE9B455D1B84EBAE7A524
+:104AC000FAADD89241F7D22A58FBC414B2E56BF480
+:104AD0008EB9C21B9FDF61CC8F8BF82356D247C59E
+:104AE0007D9128795F44DD13715B7CC1A1237BEE4E
+:104AF0008B5C3D22BE14F15A6CBF7877EFA611157E
+:104B0000EBFAF1FEF5807877EFEA3FD5BD49F9ADD4
+:104B1000E2DD3D628351340EED6B83FD1ABDF7304B
+:104B2000D5DF624A72E1FEE81A6B32EAEF641EA832
+:104B30003F8399B807A9E02B606D26BC3BCEB798A0
+:104B40004389217CC425C074D0BDD863A5F720CA91
+:104B50002C4E2BE446F83E7E693C5D989E10160F65
+:104B6000D1B8FA68863913F61E932708B9B5279A83
+:104B7000F405A5EF54C838A80B4D6FD27BD615BBF2
+:104B8000847EA0733900F9A7E2236AB3021926E8EC
+:104B90000B035A8A12CC62FF2FC07D24FFCB334710
+:104BA000BB708FF14D8AD7AF5837324EDCD711FE2C
+:104BB000872A89A72A19FFC20A9CC9D03BD53BA6E0
+:104BC000A5E6B17174DFAD59E873CAFE52F1ABE1ED
+:104BD0006F81CE154FCAF740D657D03DA0F038149C
+:104BE000A51FAAF74E16375929BE6571981EB854ED
+:104BF000EA814BC3F4C01B0AC2F440F53E9DAC539E
+:104C0000F1AB4333484FA913EFF195AF117A0BDBAA
+:104C100025DEB12F5F33C184772BCAF7783D5A2F39
+:104C2000FCF1BED45FA660D044C4F90CA074E6C504
+:104C3000144A675DCC233980BB18A07FFBAB8CF492
+:104C4000E90FA4BE3203717EB81FE78F90F17C8C10
+:104C5000F4A562E62C85DC18EAD50EC17C3DC5AA18
+:104C6000AF431CE1941646F7616E825EC30B664348
+:104C7000CF190E3E7797D2BD80C91ADDAFB869C48F
+:104C80000AC9D79CCF19F8DC2FF9D647F9EEFD40B9
+:104C9000F2B7EEEFB0D0BBAC7ECD8677D974799EFB
+:104CA00055FC1BCEE7F3E4EF4D3087B03375DBA145
+:104CB000002C3DAE72CD4CE88BF360BB1B2009C9C4
+:104CC00051145320CA9B0AAE99D984C3CDFFD03E5C
+:104CD00051AE7E8781EB5990A7B7DE5E6C9B1F2299
+:104CE00057CA8AC63F5BD8AF87EEF3BBEF8D15F48A
+:104CF00087FEBFF2BE9CFEDF767FB192E319EB63C5
+:104D00005E5CFB1D7819776B01F34E1C8DF798D50F
+:104D10003C5910F16A7365FED7058BFE737D01E186
+:104D200087F2819D5366FA69BD0879750BE4951980
+:104D3000724A7FAA00F73BECED93408FE8824E79F0
+:104D40001F5EEE4761F6885F17083A84DB252A0B61
+:104D5000841C671657C62D744FD545763D05FF67F1
+:104D600056E3BD4195FE52ED230DFF9A78FBAF92BD
+:104D7000F59F437E3C6A12F7B707989B99B40F8959
+:104D8000DFC990EB87C9F70C7AE8CFA506E87F9FCB
+:104D9000E60CA5BFBE5E13F7A6FBB0E3B0BCCEC762
+:104DA000B7C18ED7207E9FE3E95CC1474FDF652303
+:104DB000FDBBDCD6F626DE695278FCA4FE4756F130
+:104DC0003B2FC11CBC3F35B72E92DE7B2D2BF2B59D
+:104DD000812ED1051EA2C7B38829E5F5DB9DBE0F44
+:104DE000309FDA0D079EC2FDF1E5FBDD74AFB162C5
+:104DF0005FF13D78D7A2AC483F8AF20A87D386FD9F
+:104E00007B59533CED67F3FACBFB85AC93FC540A1A
+:104E1000FF9D05C28EB5BD48F47F5E9E432028CB22
+:104E20000CF5645C71D83A51F6C1703B43F87B02D3
+:104E30007DAD1F654F80FDC016625F54F6096BDEC5
+:104E40006773B07F96DB8CF7E154EA2E94E75C79C8
+:104E50000E5CD0BD7F154CEA0F7D79A346BF5B5336
+:104E6000E570CDBA92E7AB8E581129C8A624B8C414
+:104E70003B12F7897724E6F3F50A79532EE386AAE5
+:104E8000368FA6F55615E06962DFEBF2968D87D274
+:104E90005F05FF04BD744FBCCAE9B52584ACFBCAED
+:104EA00066CD70CF5CE5E30B853DAE1C4F98974017
+:104EB0005EB86D78CBA59CAB1588437317BA0C7E92
+:104EC000575E8FE218A664B2B7C43B3E1C6EB7189B
+:104ED000AF24A4FFF9CDC6FBF2BCBE7897A2308602
+:104EE000FAAB70F279C3FEE174129C1C0F84A7CE5A
+:104EF00007797F2E1A87E851190C5871DE2E47FC6E
+:104F000004CFCF7506AC18677E9378B742DF20C612
+:104F1000D1D7C7DB0AA12F599CB674E04FBE6BCF27
+:104F2000E1233958C5F182FB3FEA1E60387E2A240E
+:104F3000BC55CDF1463DAC79A315F498D3C7FDF926
+:104F40009B24DDE7378DA3FBCF55162FC5D7EB127A
+:104F5000BF7F5C11793FFC0373363D6675F3FCD56A
+:104F600085827F6F92789D9219CCA1F76956447A19
+:104F700000E71C6733CDAF1BBF8F707C687807C517
+:104F800047F8E57CE1471C59D526233D7BE011F825
+:104F9000ADDA5441EB6DA145B73943E1D87C200728
+:104FA000F77AE6F0F58D77779853A7FB369F3F3277
+:104FB0002B83E6C9E1045E633CAE49786F86F30952
+:104FC000F1B1E217753F588DB7A050DC135C50D893
+:104FD000BB7DBD675D7A49BF69E4F485DDBBAF7514
+:104FE00069C345233EAEAD4ABC0316BE4ED5FA5446
+:104FF000EB52AD53B57E9FB2FA82295A8F9CE1FBEA
+:105000006DDDCF7AC1D3B312DEB992AE1CAF874348
+:10501000EF156D2814F2A83CD3B8DED11FFABD4BB2
+:10502000958F0FE6E01EA0AAAFC62D97BFD305BE91
+:1050300007BFDD25E98EFA2BA9BEF17E4465B7BC1A
+:10504000D8B92E19F2629746FAEECA070FA5FF1BD0
+:10505000F4D817841E7BBA66DBB254D80D2C818C31
+:10506000D0F799AA82423E2CE0FA0FE4C542B94F2C
+:105070005F97A3DF573832A4DEC32FE4EA42BE04B1
+:10508000215F7EFFC26B1F8D71F5EC9F0AFEF9EB6D
+:105090007F6DAD7084E24BF0F9FD795D74EFABD2BA
+:1050A000617321CEB6B2A982E42D4BE1E7092D242C
+:1050B0004E2A8C0F2A9A347A37ABB27E54C0FCBF8A
+:1050C00028972B3794D1DB3C8A4EEAFD0DB59F2AF9
+:1050D000F8774AF8E74A3E7E49AEBFB9D56EDB4263
+:1050E0005AF76E5B25F85F96CFA9327EEFA653B7CD
+:1050F0009FB9E09E14798F85CE251BACC2BEB73315
+:1051000086F4D5D32B5F796F26AFF7E5A32D19D0A1
+:105110004F141C8BA41D6F81B4C72D947A2BA7D379
+:105120001B85217276D1D3824E952FFEEA53BC0F98
+:10513000559E29E5D983E27EF9FCD65D44B739EB6B
+:10514000375ADDBCDE7B856E839CAEAC2B76C23ECF
+:105150003D777D8B1572E0BD4281B7707E2F9771D0
+:10516000A90AAFD877B410FF85AA0FF9B78B8F7350
+:10517000FB8AC858C465A871FE5BF271655D7C024C
+:10518000C6ABACABF821CE3D4ADE87AFBBE3916244
+:105190003DCCE7FD615D1E1FE7A17BB6E5F2F7A5FB
+:1051A000C2EB9F9374FBB155BC239816DDFA1CC566
+:1051B000152C8FF2403E6467B707302EF81970DB6C
+:1051C0004CE2DDC1EC9AF6AF0007578B293E05296A
+:1051D000DE3B829A9CCCF3CF98C47D20C496204DB0
+:1051E0002A12FC00D314CA59523BBD7F16129F6984
+:1051F000E0571BDBBA1EEFAFD89218FDDE8BE24FF3
+:10520000D58FE24FC5BF7DCDCF517479F33BEE967C
+:1052100076883C4F06EE51CC7B6830BDCFFF5DF306
+:10522000B4C977F0BAE71B217EB7E092F9668B73B9
+:105230004BDFF3DD549ADCCB7CC3E7A9D6898ABD6A
+:10524000EEF62B340BBFC2718DEF5FBCDDF1159113
+:1052500014F7A5E6A5ECDE971B2FEF294A9076847C
+:10526000F618E891E5F2F7205850E4F1BD2CE4BBC4
+:10527000DAF7D5BB614A3E9FA893FB226B7F10EB08
+:1052800099D567D13B19C79A8FC7E0FD8EE3E30438
+:105290007CAADDED5671EF95C5D85C783F919FAF44
+:1052A000E8771F1634F5A773E4ADF55924176EF5AA
+:1052B000C70BBB83D4EF174A39187D7BC53D57A078
+:1052C000FE66B753E3E32C70783EDF4CEDF33DD040
+:1052D00007A33795D93249EF15E700E507BA5D63B3
+:1052E0003EBACF043989F5653A908D7D67D16671F4
+:1052F0000E986262EBE12F1CD4E89B940A39F1B856
+:105300007837926D31BEAB7430C7776311F016F603
+:105310001ED9EDD6566F7FC871AE6FC0CEB4C0E156
+:1053200023BDFD6D29278F6DEAA0F7C9155E2FB942
+:10533000A76213F7523B634C647FBBDCFB2A55D258
+:105340009FA4F846F9A39EC0FF5D093C99685F2BB6
+:105350003597D3BB3EF76C9A4069D5C6D247FD85D9
+:10536000B80FEB4B1E43705BC93E56553B41DC1FEB
+:105370007D26221EE79B0CAB3F23542FAD6AB997C5
+:10538000EEA99C6C89A47B2A139D6513E393E8BD69
+:105390005DBAF7A5EAFD40AECB25B5130CF74C1668
+:1053A000F03E1107FBE7D6688A2B55F747EE8ED201
+:1053B000BF5FD44FDC23B9D225EE8FA4527D57AF07
+:1053C000F670957EDE20EE2384DC8B993A87B7AFAA
+:1053D000A97D3916FD2C7DE483511C33B03FAD050A
+:1053E000DDBAEFC56C16F7621A715E821E99E09BFA
+:1053F0003907F8FFA599F0DFD778D5F85192907367
+:10540000C4AD8138D25BF520B3C19FAC3B19E9C56F
+:1054100027CDAC1E7A80D25FD4F747255E4EC635C5
+:1054200067803F166F7F2C03FBCBA918912FDF3EBF
+:10543000EB6DC82B7D6B84D0CF2D8CF4E14ABFD0AF
+:10544000AF5975827A1733721EFCB145D1E21D1E29
+:10545000797F46C1A5DE5B3D6511EFC5E05E0CF8C6
+:10546000FD134B7001E8FB09D75F718EFD819463DA
+:105470009F349BE97747FC7CA1400FF9A4F9E5181C
+:10548000DCCF55FA5AA9F9F75EBC47B3728FB8A7BB
+:105490008A77CDE9CD4A69075926ED202B5FB54EB5
+:1054A000C2EF8E70FD8BBED45882B6DEE8B744EAF8
+:1054B00057DDF9DDBBE8DC56B353E80F35AD1DA46D
+:1054C0003F287D44DD8B5BBAB383F409D56ED96E7A
+:1054D0008197DADDE27B05E2D6E5EF856AD9384FC0
+:1054E0006B94FFB460FEAC3596D07C05E53F2D5043
+:1054F000F6914ED207EFCFFB0D9DC36B9B64BF3C73
+:105500006F0D19EF4D30693FF13DCB81F662DF57EA
+:10551000E5B5BBE3A97DB0366A3DF679EF32870584
+:105520006963AD83F6FD2D75A63CCB080017E581B8
+:105530001EB75FC66FF55BFA9F91B01FA4B2CE4352
+:1055400078F7F5A0533F0A7E55BF67A9EEBD9C7F53
+:10555000FD8BE1E8FF9A41ED17F0C683754DED2C08
+:10556000F827DA8BE43C0ADA8783AFFB1D14F2F9E3
+:10557000492B5B4FEF075B7C0C76FBA0F42BFAFF0B
+:105580006212BF2FA1059F0DD5AF9286093DDC1792
+:1055900021FC8B5EB77E0A707C4FB31616E34CED90
+:1055A00032E7A07FF53B2A4A4F1D2FE573BA3C5FD7
+:1055B000D906A438C0C79AD74BF710D7161CACC46D
+:1055C000BEFC40A79D7E5F55C5E18DEF8C22BD35A9
+:1055D0007DC064DACF34978595F3FA070B4C41DC34
+:1055E000DB7A80D9455C803D4CAF3545523CB2B644
+:1055F000FF177F813C4F337F7508BF5392F66F1AB8
+:10560000BD7F39AFEBF327F11B33E52C504CEFE0B6
+:10561000C5EBA66190C35D933B744EB2079CAD761B
+:105620008FD8275828FCFBEFFC4B6C82A907AEF300
+:105630009D9FD3BB82E73BED64AF1DBF5FBEB71735
+:1056400006CFF91417C545F37AA4679E7798E89DAD
+:10565000B1F1FB0FD1BB79E3D5BB7A76E3BB7ACC52
+:10566000951E0F7B32D950B95290DC28E8764D9CBC
+:10567000F19C98334C9CB7728609F9A1F0D7653F2D
+:10568000F78EAEF5ACC3E5CA7FAF7E6FAA3A827ED5
+:105690006FAA6B7FD6B7BE9FF001F407AE176CC838
+:1056A000F4160EEBD7B37FCE907851FBB059F63F8E
+:1056B00043E26786C324F011F67B1B8A3F14FD1575
+:1056C000BCEADE91A21BBBABED4DDC0BE2F42A7C05
+:1056D00088119DAE203AFDE5DD75B8E63FC0ECEDE2
+:1056E000D0DDFF123A05F10ECE65D3A92D9C4EC137
+:1056F000C8C1D0131E11BFBF151ED7C8F218ADF315
+:1057000079E628B203EAF25D70BEBEDFC4FA56EB5A
+:105710007AD0E4F642EC8FC7F8D11B70B59B5AE9FA
+:10572000FBF7878978C281AC2D55C6DF8C845ED6A5
+:1057300028DF3FEEFE1DC3C50E7A6FE47C40BD7FBF
+:105740001C787C211F77D38C02B2EB9F6772BD5708
+:1057500077BF932DDE3FEE7E27DBEC273BC99C28ED
+:10576000B2F374BF939D23DEBB7E4D63B97887D6B9
+:105770005F66A7F8F8F077B2F93EF31CFC194F54B6
+:1057800047911F4ABD8F3CDEA9D7818EE1EF233FB1
+:10579000AAF9E62C407F850EEAAF7D4ED48BDB055F
+:1057A0009A83B0E31CAB8FA177A1155F2AFBF5208C
+:1057B0007FC7E3C093BAD7F907C95F0AEFEA5E9BD8
+:1057C000C2BFE233BF95D1FD4FD001EFCAAAF7D9CE
+:1057D000B5D5526EA8FB846F785C481F8CD7D70371
+:1057E000EEC6155C6E905DBCFD0ECCF7C93B63BC8C
+:1057F00080EB98C9F8FBBD2A7D7898C9F03BA1F3EE
+:10580000E47E354FC5FDD71BE3FEC3DFD14C8CF3DF
+:105810003D328CB73FAB7D300A1FDFFD3FE65EE3D4
+:10582000489E92EB7F44B4FE24EAABFB0F4A3F7CD8
+:10583000B7F88B74FABD91AF0FD1EF2ACE75FA028B
+:10584000A817992DFC017F486DA7FB1A7F98F3D705
+:1058500074B227AF16EF7F5E2E9C97DEA715FCB0C3
+:105860006A8188374C6375C4BF293DF7342301C76B
+:10587000FF6FF7697BEEBB4E1E7E82E22E7CF47BCF
+:1058800015E1F4181B71F065173FA9FC76D897B3A2
+:10589000E83E69DCC1556E9E3FF6D239914F3B78A8
+:1058A000C1CD69D3FED27991CF3F7801F7513F7BCB
+:1058B000A953E4AF62E4CF3AF1D257B370FFB4BF5B
+:1058C0005BFF23E835F362DD9BD85E3F5A73F3023A
+:1058D00037DDA72C4BCF13F7293F41F98CE4F9EBC7
+:1058E000E2B49EFB94268FEF8FE0DBF35F09FE7638
+:1058F0007358C127FF6CAAEE932A79DB975C54EBAF
+:10590000EE5F751F56AD63B6DDB3DE0A26F4FFD336
+:10591000F7549987CFEBFF021C7874630080000076
+:10592000000000001F8B080000000000000BB57C89
+:105930000B7854D5B5F03E73E6994C9249C80B02EA
+:10594000E104420C18D299BCC05BEA1D2089015ABF
+:105950001B6CB52018068D90D76442A82DB5D80CC5
+:105960000611A8DE0B5754B06827400035E8A001A7
+:105970002718EA00922252BF98FB37F2FD5FE10B35
+:105980003E90979310B557EF55B96BADBD4FE641BB
+:1059900022DAFE7FF8DAEDDAEFBDD77BAD7D86B196
+:1059A000B196F3D18CFEAEC98C1D3FFC9EA249641A
+:1059B0006C4681D16A90A034772BC6020EBB01DE03
+:1059C0007595F935B1BC9F36B45FA2D766C17E75B7
+:1059D00066EA973908FD72B1DF9F476BB1BE416F30
+:1059E000356430F6B48EB94D098CC5688EC8B84E92
+:1059F000CC2063CDD07FAC8131631E63297AC6B0E1
+:105A00001DFA312394BB06F97AE3121A56309867CF
+:105A10005C85D9DA9C81BBF53056C858DA28FF6816
+:105A2000DC5FDA4A3DD5C7687A940633638126FF86
+:105A3000DC0F33192B8E8ACD653F8052CFB2711F98
+:105A40004C13656D85F54AE4AFBAD2006EEC906CEC
+:105A5000B0342B36946F671319ABD7029088FF339D
+:105A6000795A711D6D77F51EE8D7939C66DD08E0C5
+:105A7000D8D4832C331FC6BBCA72D804C68E5A1C16
+:105A800039D62468679B241C1F9DC3C7FFAC2C7AA2
+:105A9000870CE3FB0FDF54E880BA3B0CCA01666554
+:105AA0002CDF3B7A81F61680E39442C902B075EC94
+:105AB00002ED688053940312B41BDDA31714DF8238
+:105AC000E7335A3ECC66EC174C627180970CAD639D
+:105AD000BA15CEEB2CFB44CF34D83EA02F9F0AF74B
+:105AE0006A854960FDA4A3704FB0CF8139319E1DF6
+:105AF000703E96A314627BBA6E20D602F7D1FF9552
+:105B0000B6CC63A671B13F87FA6BF8F7AF8C3DD77F
+:105B10002953BD0AABE5375689EED795697E0CEF60
+:105B2000AF3ED568A4B2F36A29C379B4E59977C0CA
+:105B30003C763D5B529E73FDF801AB86F695B10E47
+:105B4000103A86C8CBCE14F8BF28A6C26E369DB1D7
+:105B5000965F41C5BFF0763809D34FD208F896ADAD
+:105B6000C5DAB0FE76EC1F6C6776230B8E775AA7EA
+:105B70006E5D9B29D6433C2F639E49708434D620AA
+:105B800031B8BF54E627FCBC644BA073D11FE0E9D9
+:105B9000D94453CB46A45719E8328F4A6681322D37
+:105BA0001AD683F6B4374C1EA4AB5D264EB7991AAD
+:105BB0005EEED2F0FEFA28E6463A1D073083F26D1B
+:105BC0009BE377B6249AC74FF3C8FB6D488FA39920
+:105BD00097D64F616EDA8FDA6F2CEB3621CCB40397
+:105BE00059844F5933EC7D26D9666E463A0B34D929
+:105BF000D947DA607D203A765528FEEA71BC3974BF
+:105C0000DC2C1AA78E77AED2B08F46E1E1FD443F7F
+:105C1000CE4C8DDD9383E3D89B521ED677EBCB63BE
+:105C200082E37A9B8CEC23B8D7FFD3C4A83CDD6415
+:105C3000A1F5FF6F532A957F6B52A8FE6C533695E2
+:105C40007D4D56AA7FBF693A95772D8A2940FA770C
+:105C5000F966B28F8C42CEC0FF9C5E9DA32F04EEEE
+:105C60009D393C1DBD26E8A83763F8F66E6C077CAD
+:105C7000F6DECAF1D97F3FF3ECC820BA5C6B49B8B5
+:105C80001EFF30C284E7EB8F610BBC704F6F17486B
+:105C9000347FFF680EEFB7EA683EBB866DC5F16FD3
+:105CA00017E8F9FC133455D86E4FE0F3F666010C93
+:105CB000FB59307DE6CBC897F664A8CF0BC2BD5325
+:105CC00078BB7D0CAF57F7ABB6FFCE66E17428F01A
+:105CD000DEAF83F57388DE697EB5FFD7459C0F2361
+:105CE000FB7B3235659E61EE23C1C6FB135FC07D31
+:105CF000B8910F3242F8A25E21BE50E950A5BF977D
+:105D00006CFC9E330D82CE4127D0FDA16E40F99AE6
+:105D1000027C20D1BDD8199C679724F825921FA03A
+:105D20004439AEF283CA072ABDA7019F4909C1734E
+:105D3000FC28825ED5F2B495E3A53B39E601C26B3F
+:105D4000A7CE02A210FA03221310BEB3C00EE34A7C
+:105D50001E35370C27BFE2FED97B50E5C108F7702E
+:105D6000DDF9F5BCFCBEE727F986721BE9761879E8
+:105D7000F5B53581F6A3D26D92CDFE5F483FFD9219
+:105D8000492BC54169E2741379FEB70BF83954FA0F
+:105D900079C9C6B8BEC4734EBC5EDEA9E7193AE73E
+:105DA0007246722F338AD747E2573D5788DC8BB152
+:105DB0001506EF93316E0F8C057B606346907E0372
+:105DC000495F2E43FDB5CDAAD0FEFEA09109FFAAE2
+:105DD0003E19AA97E425F373C2F40CB3001E070E14
+:105DE0001B88BFFD1A56F50A8C6B2555113CF76DC3
+:105DF000362E0F06174CD2AC827D05FE6E76A3DEE2
+:105E00000A8C19382BC1F8C0563040C87EB0FF58F4
+:105E10004A66EC7ED029A897AE809C63598CC9DB7A
+:105E20003E3F2BC1BE976D9319DA350110DB328CE2
+:105E3000733D19E331F2718CC1B83A31AE79EBA7F9
+:105E400077217D9D07FA44FBE62353FD040676CFB8
+:105E5000EC6D3ABAC765317A0FD61FDBFAC48945B3
+:105E6000009F6F9714B4374A6533B5D73C2F7B70CA
+:105E70009D3A73E94509EC9C407BCB535150EFDCD4
+:105E8000AB63261857DA2E59FD30FF726F0CDE0C0B
+:105E90005BB645F77E5F76506EDE26F458D52EC988
+:105EA0000314C3AAB687B7D7EC0A87EB983608C3A2
+:105EB000FCB36C318964FF4D6636B4FFD896045448
+:105EC0005643723B92AE506D237EEC8D5C1E33F6D2
+:105ED00059F21D4097F2E1CFD3DF377378BE80CF00
+:105EE00001FCC9E7FCFED57BAB1732FF93D1ACC0F8
+:105EF0000BE7AC3F6CB2B8E160F51D329D23E08D3D
+:105F0000A37B7645F5DD4E7C7A48B6A01DB6C12749
+:105F1000BBB1DDD969DAA98173D61F9018DA9F4E1B
+:105F20009FC1C3EFE9EA326C5FEE3359146C3F64F2
+:105F300060328C0F00DE4C88C7717D847FC42BDA01
+:105F4000A7F0F763A928887F19F19518C457F3566D
+:105F5000BE9FF37B397E4AE5D55AC2578BC4524265
+:105F6000F0FC67CD8B43F8C27EB3B7FDB50BF1BC37
+:105F70000CF6675010EF32E1F93CE007E7D51FFE61
+:105F800028BDCF1CC4B70CF8FEAD3A1EFA2FBF01D6
+:105F9000BEAB987B1DDA73DF17CF69C8FF4964F782
+:105FA0009EFF03DABD31608F23E908FB38A9B6F7FD
+:105FB00078222C589170D9B902EA27A5BEC232C105
+:105FC0004E90E21D8F225F9F9DF39747101D3D73FA
+:105FD0005FB4215D34EBFA5A9F860A777CB4157959
+:105FE000B03F63FEF6D7609DE2842FD3F723BFFC5A
+:105FF000C96041727A42F023FE1901FF4EC6EF1BC1
+:10600000F0780ECFEFEC34F80D708FACBDC43E6469
+:106010000F4C407DECD5A39C2AD10F54AC407B1C87
+:10602000E6C375242023E4EBDACE3F9F96609CA460
+:1060300024B2C5081BCD7E19E769D35D193A37CC68
+:106040002359FE42FDDA6C13E8FC13537EA4A0FC36
+:10605000695EC81C5113BF4DCE3392F3CF0A7F65E2
+:1060600044FB6F0479AFDA7DCC3D361EF90BEF822D
+:10607000F30F973BCBA733F127F842C0556BDCB148
+:1060800046E8BCFC666B2A9EFF63A4B358A4BF53CA
+:10609000DA51B0AFBA5689F0568FF483FE15EA375D
+:1060A000A8EFF70A39F27C77F1A8442C252B702A47
+:1060B000ABEE94AD7E68AFF6717ABA8E6E84FCA8B2
+:1060C00069E3F2E33A3A6A0338C44EAB47BA526125
+:1060D000C0F7C9A0FC987A0DF6FBF23426F4955B64
+:1060E000D05B4E5C1FD0CB2053E22C39217A4BE29F
+:1060F000F6962A576EDA0AA23E64DDC91E23D386BD
+:10610000AC7BF35E4B183CD59B1AD6FF073E25AC03
+:10611000DDE6CF0E6BCF3F610D830BBBA787F59FED
+:1061200076DA1E06DFD25716D6FF8717CAC3E0C13C
+:106130001C38CF3076C7901E4A95C2FACF514C61B9
+:10614000F3CFCB8E0F8307CDE27E841DA8DAA75F45
+:10615000D8B81D1459AAF7FB136BF83AAA5FFCD301
+:10616000E9E1EBCDB787AFF75DF1B21BEC7E2DD83F
+:10617000F57B413F62F902D8FF5AB0EBDBC0FE4726
+:10618000F825B0FFB1F482FD8FF5AF80FD8F703B35
+:10619000D8FF081F047F05615F531995879ACAA924
+:1061A000FE46F7D725D63D21D63D29D6FD47EF49F6
+:1061B0002D9D6593345F009FCE4CB8A847396C6F16
+:1061C000EC2BC538C0C05B32DB810CE2F09C684A26
+:1061D000447D348AA1DDC2CA07DEC63845FD818907
+:1061E000968D0AEAA1FF7C07DB03EDB282F2FCA8E0
+:1061F000EF83589CE7CA17C087F938EE8358F48FAD
+:10620000EBBE64046F847605E039FB4130903D03BA
+:10621000720DFB67AAB047CFA02C6FDBAF477CD4D1
+:10622000EEDD4FED6F7975E1ED7B5BC2DA2DD81FA6
+:10623000CA5AAD87FCFB4B3E753E3FF5AFCB94ECA5
+:1062400068175FDAFB9FC9CBB05FDBBBC9F77DCBBB
+:106250007D7F72F0C51C94EB4ED0C37E73701E67B9
+:10626000874EC07CDF7599FB4B135011B4496C12FB
+:106270001457D826B60AE45DADAFB50EE5506DF6FD
+:10628000221DCB207924E20D206DD15E42E71EEE67
+:10629000EF8AF7D3D8FB60DE37BCC76FB723FE3A6F
+:1062A0008FC5E2BAFDED72983F73771EB75BEFCEF4
+:1062B000D313DEAEB41F8B55A07D83F718BF6FAD2F
+:1062C0009FCE7D54C0FD50D23DFB643A77F5171A3E
+:1062D000BA7F75BEFBF3649A678E6F520C9EABC794
+:1062E000CBD773E529B4CE9CCCA595B8FF93A90B69
+:1062F0000B65B2F34030A35C9D32AF15E303B55E8E
+:10630000D93E9CBFB546CCDBA5E374F856E6AB5D41
+:1063100063803E4E968DB291CC17FD7E93C7EDF112
+:1063200052BD2313F5428F5989413A7EB86C620CF5
+:10633000E2F52896585FB653EF80B2A69DAFD763BB
+:10634000E98E457AEB69CF97D16E51E75B89EB1601
+:1063500086D0F510DEDC84A72A4F8B19E709E28F7F
+:10636000D7BBF2B81D7ED2F3EE5D68A7F464475B3D
+:10637000112F5D7A46FE6D2DE015F5414F675A0BE2
+:10638000DE83BA9E4BE0A33F5B43780DF874A2DF37
+:10639000A25616D64FC7F1B52B7C3F16CFB97F5BFF
+:1063A000847AE959B0ABA1BA4ED7908CE7FF787BDD
+:1063B000F8FEAAC43DD7E9FCC9C921F45AD731C4B3
+:1063C0002F66A2EF0E953F14C2A78AC79E6C6EB7C8
+:1063D000F5A41A3CE82FD6ED6F25BABE3EBED39D7C
+:1063E00081767EDAAF8D1437BC913FABDA01217E26
+:1063F0000F433F4E5736B1503321A8EFAFD9EC2FA2
+:10640000E615A23F544EFE5E0F1B5886CADF897602
+:10641000701CCADDBF3D85EB0EB683BD07EB3A8D20
+:10642000BEB91F829D35680546817D0F6ED7798480
+:106430007F6246FB7499B04F3F561C4532E857E7E0
+:106440001A0D9DAF2E278ADBB5424E7EB23FE3A7E1
+:1064500048AF7527648B11ED50F05B086EE3764111
+:10646000BD37E3DF67A0BDDDA6233B40B53B9CC243
+:10647000EE382FECD9F36B06F464AF1E96D813B048
+:106480008F2ADFE6AE346877E6CC257BD529B75175
+:10649000FC71F9D670BBA0DA130ED7EE0D879D11F3
+:1064A0007683EAB7F5E40DD90F93D1FF289167A45D
+:1064B000201F7C2CF0A9FA232BA75A5390DF3768B2
+:1064C00095B96A3C00EFC975F8D56ADCAFA72ECA4A
+:1064D0004A7EC1AA43749FFD9F71BFA33F9571FB84
+:1064E00088F17BEDF771FA76E924EE6700B9D27C8A
+:1064F00046C9B3069AFADD83B12497182B437E6808
+:106500005CC8FD483BC65CA1DC9727E24511FAF266
+:10651000566D9F1C1F221F3ECB9B40FB2FD633077F
+:10652000EAA9953156D25BE38DDCDE2E59EDB5211B
+:106530001D8C07FFD81012CF1E6F1E90B0DFAE87E4
+:1065400078FC5CF5EFE76B2DBAF810BD0792276C6D
+:106550007E90247CFC8DE6B7C0FCE6E0FC70DF7129
+:1065600078DF9F1658491FA7CF67AC9BF8B181F819
+:10657000513DCF15A0B362A0338C9920DEEAB61F3F
+:10658000A138B09375933F521ACBF7518AFB41382B
+:106590008A97967C2E37CAF3F9BD350B58955B6FF9
+:1065A000E5DBE3F3A1DC9BEF48CAA77A0BD1E54A10
+:1065B000412B60A7A4F40D23771BFFC2FDAA4F81D6
+:1065C0000F90CFEF699094CC303B88D3B78B57B105
+:1065D000CBCCDB3B03EFC16DEFCE4E463F8AF3D50C
+:1065E0009255262533844E5D48E7702F5596EA1F55
+:1065F000A3DDED5895AC60BCDF85743F01AF91D34E
+:106600007522FC43FFE23A3AF786C3F0B71DE9ABC7
+:106610009E19ACA8475CBEC876AB16E33AF9F9C040
+:10662000073707F9205DD0658B43F2A0DC6FF94A8C
+:10663000CBE3588B258A5BDD09954897F487FDAA43
+:10664000667A70FE3B01447F886D4924BEA1469066
+:10665000233F17E7BD53EB3F827C7C5CE7CDC078DE
+:10666000CA7127CFEB2C646070807C59CCBAA9EC3E
+:106670008DAE3FE0A7C9DDE3D06F7ECF61A0384E7D
+:10668000CBDA1D31284F73D95ACBF96C54EE6CEF2D
+:10669000B5FC91ED0A2024765EC50BC5853611FE4A
+:1066A00055BCEECDB7CF47FC8F34BEF6AF076E4773
+:1066B00097A2F681567D0A279BEEECA220FE5CCCC9
+:1066C0009B8DFB55F135843FD8F358B887056CA0F6
+:1066D00008FD1A156F46F8371CDED4FB4CD70DFCAD
+:1066E0000CAF0CF412C997487CAAF75BCF1A743C24
+:1066F000CED5F0CE42E87FF75A8D82F6E175F8BD2F
+:10670000011EFC26DEE48F91C8DF1C092F2A3E54AF
+:10671000FC9C8EE7E34EDF23539CEEFF355EDECA22
+:10672000773CFA6DFC18C97F23F1DB9255117C1977
+:10673000C17F2ABE1CAB6289CF543CD6298CFCD6C3
+:10674000BACE18AB8705F167867F883FCC53503CA3
+:10675000A65D62CF48DF850FFB28AF11891FA00D12
+:106760003BCAF59D11FCA7E26D24F9A3CAAF33CC57
+:106770007FDC22517E80F3E7AF0C1ECC2FAAF901FB
+:10678000350F704CC8BFC8F20CD81D9877D998DD6A
+:106790009384F65AAF5E9D87E71FCFACE91EB70220
+:1067A000C69F99C9CB5EB4D342607B148FC39D1939
+:1067B0006D70E3BD9D9126CF423D7E46FAF5ED1CFE
+:1067C0004ED12B082F4C996501B857A7C6ED1E1660
+:1067D00072D843E59985D38AA99FC4DEC4FB5024AF
+:1067E000564EEB48524219ECE7CC0393F29A59F01B
+:1067F000FCAFE4737BD62BE4F9501CFB3712C5B118
+:1068000097800AB060BC7DD6D36513A0FEEC8313DD
+:106810006D94FF6B0C5F1FF56806C50737D37CB717
+:106820007E31A05B9A13DCD790FE2BBECAEB2B27E0
+:10683000913F512570684F98CCFD58CFC438D4474C
+:10684000AA7E1A3CF1AA39347E7911F417D387C095
+:10685000931F4F0FD56F4776FF3E0BE7A9D2BB734F
+:10686000AD507FA1E50FE9680754ED7E348BECD283
+:10687000DD1BB2D0BFA8DAF1FB2C3BC1D10EF26F09
+:10688000B4FCDC97F7DDB27363881DFC6021F70B65
+:10689000161B8F94A07D3AF7E64F1EC178F8A40727
+:1068A000258A8BDDC3BA1F41BD5991CDF9886D3161
+:1068B000925C87F928EFD83AF927BB509E9FCCFE0F
+:1068C000405709FD4C055ABA8F0AE6792C05E36159
+:1068D000EB258A8705FB8FA33CE6D2B5923E3511A6
+:1068E000F561BC4D56705C3CEDE3DEF5B62EACAF09
+:1068F00058CDEBE71A3CED3D38CFD37A6BAB821322
+:10690000954F280FC90B9B0AB8DFB5E43189EC71AC
+:10691000759D494F25B7849ED35420F4F98C6EE2BF
+:10692000FF9F0ABCFC78F5BB6FA62A984F72C4156E
+:1069300040FB3B4F9ECF44F9559C703107E97C9258
+:10694000DEF14C359E7B8781E28705B969720AF4D6
+:10695000CFFBE5CC27B05CB27AE933D51807DD6A06
+:10696000243F4ADD5FA3A468D0DF3CD6F28B7BF1E5
+:10697000DE2E3C69243BBAB1E5A614360C9FAAE58D
+:106980001EC0BF92C5D8F34D462A5F6CB230058E4B
+:10699000B8AF2995E0979B142AD9024E5F8DC25F4C
+:1069A0001D69BE7CF0F715905705EB613EB0376D61
+:1069B00026FB143CE7A429CE1D1BC4B926C1789B35
+:1069C0003B6336DE43C186155D688A2617F0FCE21C
+:1069D000DB3DEBD3C98E5E7DEEB96A685F5A509E8F
+:1069E0005F00F76DDC7E95FCFC631D8F56505C7F6D
+:1069F00087819F4F9CFBC2935929CF60DCF52D1DE9
+:106A0000F9DFAEEDE79EDB00E57D8FADD087D2FBF1
+:106A1000773DAF4DECE7467C35D23D7C7FBEFA7DBD
+:106A20003AF1CF0EE0AB9C7F9CAF5CABD7D0FD3D85
+:106A30005A507E37DEFB059D3B1DF9E9C2E41F116C
+:106A40009DBB0F4B74FFAA1C57C72F10E7ADD5781D
+:106A50001F237B50C8F1CFC1F3C3FB3DD2F17116A8
+:106A6000DAC39FFB167EEBB90F3661061DE35A466B
+:106A70002A23DB8BF48E8956385F9186DBC191ED3A
+:106A80000F17A871719E6FC73F8C0BD709FDE98462
+:106A90008DC525A0FE93FC51B998E7B8EDA216FD6F
+:106AA0002FF0EBDE0FB72FD9FB217A7CA4FDDEA8F7
+:106AB000ACC779B441B93BEDB486F943F4F62D7D0A
+:106AC00051CC1FB2EE90DF01757ACCB3748C26B92D
+:106AD0008078C3BC4CA063F20E842FEA391E0307F2
+:106AE000C1BFE27115261705CF79B1E3722ECAD95D
+:106AF000C8F3D61FBA4CF451E77BF4AA44E79F735E
+:106B0000519B7BE3F31FD97D3917F17751D7578418
+:106B10007E5440DF978B78A87F9DCBF3EF7B0F6A85
+:106B20007DF57A3D8FEF4916F2074BE42BE4C7075A
+:106B30004E703FBEBE6327C9D3C14E1E4F7169BAA6
+:106B40004B5330FED070AE0BE5D9602AF7AF607EB4
+:106B50003BDEDB8C89420F6A07D2E7835C3B2AF27B
+:106B6000B5AA5F7701F9578FF378EBE83D526E34A1
+:106B700043BBE212F233D457ACCA5887747EC19338
+:106B8000849120F676EEFFD453FCED8D688B4C7625
+:106B90002BD486E06FE81C1E993F9C61AA9F1ECDF6
+:106BA000EC21FD5C7AE5A7E41F9FE47932D714CE8F
+:106BB0004FEC10E727E7DA23FAD490F95E52E58725
+:106BC000B01FE7BEF13FC497A76CF65328CFA25180
+:106BD00016E27CA9711E4912FD8A82794073A7F0E2
+:106BE000C7CB646A77F964361AC7A4C650BEBE8C98
+:106BF0006DD2A2BD3B977967F077327DFFF643688F
+:106C00009FF7869C8FEFB1C07EA6FC71699423B379
+:106C100011ED238D24EED55B303F549F15727B6BB5
+:106C2000862C911E1B181D4D76CA9C05CEC5B85FDB
+:106C3000B55F9996EB339887EC2CE619C8C57C268E
+:106C4000F30FE4629E53ED77D71BD10DA41799B7CC
+:106C5000E0AE9075C61472BDF929E69F419EB84416
+:106C6000FEB344FEEA29F4A31A0FF33C61AF26E316
+:106C70003D7CAFE5867B46BC5E06BCDA51FF3898AA
+:106C8000DD8EFC3335C983FCE3DA27317CB756DF70
+:106C900061D881719D7A5D5F32D2F306DF5FF5487E
+:106CA000CFAE03EFEA95A9389EC781C05ED7E0FD5D
+:106CB000BA84FE72FA6E7A0FE36ECE135C8B3AB52D
+:106CC000EF925F5FDBBE9FFCF73AE627FFBDAE2D7C
+:106CD0009C5E0653799C3D923FC6142A617C3167C5
+:106CE0002BE78BBB64D680728E89B8E99CD414B232
+:106CF0004782E3849D285F7E04ED97FE09925582CA
+:106D0000A9FAA3DC6BD12E7267717BA6FF4F2F16F9
+:106D10002C23B9E229F819BE8B11F6EE9CF59BB530
+:106D200072C87EE674F238617F14AB3A48F8768C0C
+:106D3000453CA4E7958F2DE4EF6472E99D8F86C7EB
+:106D40003523CFF1AC88E39CC4384F4E70DFF3D2CB
+:106D5000D2B81C631EA29F2E0D5F5F7DF7A28E5FCF
+:106D600021E869C81F92787C6A24B98279944A9193
+:106D700047A91479944A9147A91479944A9147A94B
+:106D80001479944A9147A91479944A9147A914799E
+:106D900014AC3F895BA5F7703B9F417AE8421E1B0C
+:106DA00013847B1322E031E1FD7B13A470788C44C3
+:106DB000FD8B0B773EE3CEC138A645C8252506EDF1
+:106DC000AF0B261E5FEA8871CC2D84FACA39CDBB81
+:106DD000F97B443BBD67294E58B818F96B30D1C0D8
+:106DE000500EB90B1DF3111F274ECCCEDC4CF2D147
+:106DF00064C53C77EFDD37C7515CEE2D99C9B0E42F
+:106E0000CCECFCB50500CF344B44B720277E50AE08
+:106E1000FA9330CFEC4E9ECF2891EB2A71FEC6D16B
+:106E2000A67C8A6BE53B161586C40F4AC72CCF4457
+:106E30003BA84BA7BC87F154F75F740CFD2835FEC7
+:106E4000A6F6EBCD9B598DFB9A933D716D1ECA1B27
+:106E5000602E946F763D6BC37DD935D15233C92BEB
+:106E6000458BFC5F2DF03D4BE1F6B05FAF6813D072
+:106E70006F8F9A99E85678BEAA52E4AB2A45BE0AAB
+:106E8000F1730AE36650BE03F55876433D9691EFE1
+:106E9000B9761794AF24BA6503E9A1EFC1E6225F82
+:106EA0007139938EF4FC8288C367178A7769F9E594
+:106EB0000FF2715E9AA756C4DF2EEBC2F378EAB8E0
+:106EC000E07846E51D3FE0F299C5E9F97BD7B1CC02
+:106ED0008DEF69EF786D34C593021E8D5B17073017
+:106EE000F038CA2FF61AF76F592AE7973B5E4DA183
+:106EF0007ECD220EEA4CE8CE4A40BD2BF84A850FE3
+:106F00007EC3DFF938F30086F275899FCF79477722
+:106F1000563CC001C9A4C1F8B873076FEF117CE7F4
+:106F20009C20E613E761466F3AE2A3FFF06BE9F7B6
+:106F300002BCD1EC5FC6E5BD3F8BE434F367E17B77
+:106F4000A1CB92F72CBEB7FDF5C17F5984EF6B2F13
+:106F5000EBBCCF21FCDB8333382CED3F6B096D4F4D
+:106F6000F2A6E37BDC5F1FFCE1227C9F7B3969FF9B
+:106F700073F1D61058F7CA596CD73F3C635131F4BE
+:106F80009F67F09C6842BA7999D39769DF81F3785B
+:106F90003FB51DDC5E9FB5EFC09557501F1F88A100
+:106FA0007CBDAF3083EEBBB963CF63486F81FD3AE0
+:106FB000E2838D6D7F7DEEB7D4CF40619479066F0B
+:106FC00001865CDC457FBB1BF7352FDAFB19C29BC2
+:106FD0008B6EA37DCE1BC5F9F9A9A2B98B903F0397
+:106FE00007F6FD0AF96F5E1C18B2B89F174D849F13
+:106FF0009A572717631C2010D35D81F3D7BF60B069
+:10700000229DD6BC9A320BE302C70B797CBA7ACAAE
+:10701000A674D4AF9A43CFEFFE2DC6295F30517EC0
+:10702000C695C0EDBB1AB9A56805E16FE76E7C3760
+:107030001278DE4479D26A9803D7ABDE3D89E2EA62
+:10704000AF7FFD4105E2A144DEBE1BEB3FDB65D215
+:10705000E03DF4E8ED713F423EECD1919F592DE0C7
+:10706000EADE517C3FD17DA584BFC44DE9A85F6BAA
+:1070700046FDE676DCF73C79D373E8E7B03D06CA17
+:10708000155C7C1EEE0DC65D6CD5D12BD5C0F331E1
+:107090005AA497CBD2A68A6770FE56DEEFB2691368
+:1070A000DDA7BBF52686EB413F86F2EAB2B439ACE8
+:1070B000FE62EB9E5CF4432FBD308FFC5195CE55A4
+:1070C0007EA9D96508D387240992C57B0952B36E7E
+:1070D00066063D5B2DC04B07B7059E61C1F197DA8F
+:1070E000747E3DDC51B581ADC5F7C12A3FD4A4DD26
+:1070F0005686E7ABD1B464A1BD529DDF57817C7148
+:10710000D1C48CA9F88E4EE8AB9AF635F3D1EE1DBA
+:10711000693FB1E25DDFE7820F3FF7993CA1F9C11A
+:10712000C8F26F4D4C3915F26EF89E0603D9EEEA9F
+:107130007C6FEBBD75E89FD52770F97116FAB781A2
+:107140001C331771B9B76455787FA988BF4BACD78A
+:10715000F765A1DE53E7FFA650956B7D5928AF2256
+:10716000C7CD9385BC7951227953D32E9D93E19E4F
+:107170006A8C6E0FBEDFA94167929F537B4DE2E39D
+:10718000528BC4BDC3D8A78B3268DD9A3693DD0419
+:10719000E36AA3FA62D11EAA8BE98B453B277048AC
+:1071A000663B04BA1293057E26089485C41DABBDC8
+:1071B0003ABB2977183CA3DD84EF73F0BF61FDB6BD
+:1071C00022CE2755BE685A8F59FA8A904EABB687A1
+:1071D0008FC3735942F82FE0DB991CEA8FDBC4BEE2
+:1071E000FBA573C427FD5FBF9F8E78AFD1B0B59864
+:1071F00047BC24F1EF1E00A6EF1E2E897C64CDDF74
+:10720000CD51482F973EAF23BE0D487D24D7CE1CCD
+:107210005C407229A0EB23B9D6535441F22110DF10
+:10722000578172EACCC17ADE3EBAAF4281F64E8413
+:10723000B17D1C237D7FB9E801921FF364FEBE81FE
+:10724000EDD459781C687D6F13F9153A25D4EFBE3B
+:1072500052A4E66DF4C173CB41BE0930655F3BF2C9
+:10726000619599E239603FB5BD8276DEC2642BC676
+:10727000C5AB701CA7037D68FE2F31E1CB65889FED
+:1072800045718E3B8B308F9DD347FE035035D9E936
+:10729000F57F32901FD9AF1BD88D722A37CEB1B08F
+:1072A00008F651A7EF5E87A1A72BBABE2ECCFBCD67
+:1072B00095B93C627B385D057276F2EF2444FEB0EE
+:1072C000BA88CB5FD05BAC05E942E2F83DE67BF5DE
+:1072D00014CA9540F74492C7917C73D1F7442CCAE5
+:1072E00087D3A0C7DD217EFEE9A57B284FBF00DF45
+:1072F000654079EFDA707A18FCEA67E4EFB1C742CB
+:10730000EA910EB784C3917484F4E80F933B6EA2A4
+:107310009B3D82AF6A6775D7E33D0CC177002C8730
+:10732000C04723E088FEAC9CDB097BF0BF61DEBA7E
+:1073300071FE5EF2CFF7F177B1CDA0BF083E104DE0
+:107340007963CD3ED04F895C3FA15EA88DEDA6B894
+:1073500054E08081F2230F777C4CEF19810E29FED7
+:1073600052DBF15A32FAED3EF41392480F26D33B2A
+:1073700095031DC9E86FA8F5751A6F96788F4F763B
+:10738000BA5AEF94FD59B8FF5AA93B17DB7D851611
+:10739000D11F60196146E7A89338BFB30E99E4790D
+:1073A00024DEF60A7A05B9904BEF2C0EF1B8802A4C
+:1073B00007AA853C398AF5399CEF2D6A5E49C2F7E8
+:1073C00072D1C3CA879B8A547BB881E236BB8A14C8
+:1073D0007EAF623CCDCBE34AD45EFFFAE5DC0939EF
+:1073E000384E11E342E4D0C4A05C41FE4F25FE7F3D
+:1073F00058970CE7AA794EB236A39C5ABCA614BA89
+:10740000B3E5DA15A5142F13EF3F23F7154947F617
+:10741000228EDF1A4D7C4962C87C97C05D4FCD2318
+:107420003943EFE8EF4F7CBC14E313BF58BC99E835
+:107430007948DF84F2399E673B97E3C836D734D763
+:10744000D3F1F286967529C3EC23729FD58E96D21E
+:1074500064E5FA7A75BF974CEAFE66E99242EF61FD
+:10746000C19AD22428971BFFD17BE0E7BDD461F0FD
+:10747000A35EAD5EBC625DDC3074739D3ED81EA21F
+:10748000BF26207E3D94D71869FF91659DE4EFC526
+:10749000381103BE6A25FE027E09D10B6542BF0E7C
+:1074A000C51BAA968E47BF9339968E473D037C55E0
+:1074B000611DC6AFC42F4B34F476C34D65E47E3EE8
+:1074C0002BE271D2B222CE2FA76CF66F50BE8EF493
+:1074D000BD85619AF4ADDF5BA46906DF417E4B4B4D
+:1074E0008E51300F54323B9AF73B6CB260DCA6FFF2
+:1074F000F09714D7ED7FC4BC80E70BCC6C34B47725
+:10750000A54EDD11AA473CD3385F461770BBC59521
+:10751000ADFBF6B8504ECC505C88EC869C68CA93A4
+:10752000047C9F92DEEAEF2CB4603E23D00DDE2176
+:10753000F093EBEBFF4A46FD1AE8FC88DE8305BEBC
+:10754000FA98DE896D10EFF48EFAC43BAB6E258697
+:10755000BE8B2BFBA014FB6D1465303EC0E35A6A52
+:10756000A9FAFF21FEEF946985C3FABF090E73687B
+:107570005C4049192E8E121A17C8D4F2B80096181A
+:1075800017C8CCE4710184312E8025C605B01EE3F6
+:107590000208635C00618C0B208C71012C312E8001
+:1075A000F59F89EF1FFA4130F178A599E4FA4A7CFA
+:1075B000DF0EF7B7F230CF3BAD6C95297F8BDF3F05
+:1075C000A07EBBEEDD4CBB7837E3DD4C793CD701C8
+:1075D000D98A2872E9068E631CC7B55FB2AE41B97D
+:1075E000D2B480D6DFD059F8DE62AC6FD559350AF7
+:1075F000D111C7638B44EFF46B3A5B29EE549C7254
+:10760000584FF56D12C338E95D06EEE73A65A8CD2F
+:10761000A33C28D9C14E4337F91FB57B25A532F4C9
+:107620009DC6F4AB2407D47CF232DEC49C5E935238
+:1076300039CC3B90A177E7E2DDF432CC33E37B71C8
+:10764000F92B7AD7EF04877414D2E156FEFED902E3
+:10765000FF88DF23DE35D574EE5F87EFA122F3CDFF
+:1076600043DFD345E49DEBA789BCB28D7F5F51F624
+:1076700064E5BE03B0DEE02603D91BEE42C703D3A8
+:107680009230EF6FA7F8C8F1C326F28B3EDC7C5333
+:10769000587C84E53B1E9C46F9F9B114AF68D44987
+:1076A000A48F67974D4CC17B9C7D42477AA737AF2B
+:1076B0007C35F66B9CAA503CAAC4C01EA079C47B42
+:1076C00029151F25CD924703F05266A577F64BE0AA
+:1076D0009A305ED9AF33AFC7774D4B187FE7A0D252
+:1076E0004DE36689E8060304789F15E23E9774FE31
+:1076F000F94B7CC7709F81DBAD691A9EBF4EDBC81A
+:10770000DF33DCCF1C7AD4B3CB91BA64D28F7FEA5B
+:10771000837A47F4D8746E972B2938FFD2933A7A3C
+:107720006F5B92F2932C07E9E9627AC720F917C9D7
+:10773000D76E1E997F22DF311CD771B902F748FE40
+:107740005017D225C5651C549E6CAAA2F277E27B25
+:1077500088EBDFFF0F9C453F312D25C68A726EC432
+:10776000EFDDA2BEFD7BAF17C4FBB5344D4FBE822B
+:10777000F7F177B315EF437D2778CA56BE1FF16442
+:107780008F656E0B7D0F061210EEB5140F22615C33
+:10779000DB6BC7EF8E060E4B167A977C9D7CDCFC6C
+:1077A00008BE1371654A1649C1F8F7A69264D877E6
+:1077B000E9840CDAB7CBC7E3A37443C9183FE7F8F1
+:1077C0004ACF731C9B5618AC9F27F82600FD399DA5
+:1077D000FCD083F4F61DE2A6BBB0BF9B99E87B6AA0
+:1077E000FA83FDCCBB791CC54F55BA196C4BD981B6
+:1077F00074F39E90FB8B17BFAB43FDDF9BEFE8C19B
+:107800007D54545E7D2499CE377CFC4A7DA71E1999
+:10781000BF0A959FFF3FDEA79F6A6AA0F29DA6550B
+:10782000547637B9A93D44FE5F1A41FE47C63FAFC3
+:10783000227F47C63F99518923FD09FCCDE3CD1135
+:10784000F1CEB251F7AE87FB9BBD456FC52A35FE21
+:1078500089EF87579A491EFCF7B461E39EEABD9908
+:10786000294E3AC84C7978FFB3B2276A35D0AE9D1D
+:10787000CEF1A7C61D913FF07CC81F58227F68B586
+:1078800041FE78560F2C5CC0F5BC9BF4BC89F0BA65
+:107890006E0DC80F80EF639630F97125427E80C36C
+:1078A00071377D57D56960182754DF51CE82E28B3E
+:1078B000BC61E48997CB937151DEE7E97BFFFA283D
+:1078C0007A9F7B5CBC873BBE81BF87AB64E5B4EE2F
+:1078D00030722516F171DFA881B37F80FEF7FDDEDF
+:1078E0004CF6CABAD1CB8AFE19B9724D7CD7F234A4
+:1078F000FEAE80F6DB7E57E03109F3A18DF7301B39
+:10790000E259FD5D811491CFFE1EBF2B306D7AE1EF
+:1079100077FF5D815BA78F5F1CFABB02B7FA323835
+:10792000ACFEAE001BBF7884DF15983D3DE9FADF61
+:1079300015B86D3AF71747FA5D01B027CB705C9226
+:10794000CD3E07CB34B1CFC8EF694F8AFC5D97C6F7
+:10795000B118CBD258B796EA359E02FA0E5EE3FD17
+:1079600025F981F98E9FE3794B9FB04DC90638CD3B
+:10797000E02539D99B67BF13EBAFD9EC77E13A919A
+:107980007173C42DFAF7B09FBBB13DF2DD958ACF7C
+:1079900015D3B9DC6814E58CE6E1BF276F9CCEF304
+:1079A000F237DA37ECB706D71BDAFFA6A505B81F02
+:1079B000D86F2DD6C37EEBB064E684B0EF53AFA78B
+:1079C0003337D155E3744E5F20CFE67DC8ED412AB1
+:1079D000B3B49E78B41FC73CE489C7FD8E691930E3
+:1079E000E177107F740F9850BFFF71F58009EBFFAE
+:1079F00068E7EF9523E77F793AF703B2660CD0F892
+:107A0000F168E3937D3E108FF65356D587EB28DF60
+:107A1000B27732E997F142BF8C7F6882AF0FE86D91
+:107A2000FCB638CA67B3E2446AAF31723EAD79A89A
+:107A3000F2E00185BEDB9AF76188BD33D903FB0E06
+:107A4000B3BFB483FCDD25C0784F7B750423CDA282
+:107A50007DE564FCDDE5182137D04E5B0C72C15921
+:107A6000F5E69794F7C7F1381FE66891FE7CBA41B6
+:107A7000F17D9A05FDD0E50BD674915FB875A85ECF
+:107A8000F899FBD7A1DF0CF65B587D4DE5912ED41C
+:107A900037B57BC3EB9D0D57C97F05FB2DACFE9E13
+:107AA0005F9ED3F3DF2F08AF07FCEE45BA54F17B9E
+:107AB0005CE79D8C7EDE71679495BFDFF7D2EF9512
+:107AC000EC10DF3FEFFC8F599C6E04BE61BC377435
+:107AD000FCC8F4D14CFDDDB35836F2C38D4A552EA7
+:107AE0000DFDFE899EB929BE373786E48E4BF855C9
+:107AF000F59516D2F369F546925F25729415E1A1CA
+:107B0000DF3F2993859CF212FFF7DC1E4F713C3A50
+:107B100000C2095329EF93DCCCE1812403C9871209
+:107B20004D79DD1E28DFD4847FC7FE2CCA0719F9E2
+:107B3000977F87E9D27BF977E25AA510FDDC66C909
+:107B4000BE0DBF7B6C96441CB1DA4CF9827E8C2F43
+:107B5000C279B6C47BB62D8375B6DC9943F6713F06
+:107B6000E3F2D4BD80E7ADB6C4972F5E81ED0BA7DD
+:107B700050FBC16F263E5E80F653759415EDA72D20
+:107B8000366E5F6F999F4DEDAF4BCA1A3CB7FB2124
+:107B900046EB6C99CFCFBDE5F171E2FB0B8F09F994
+:107BA000794B8B7D34E6A366591C17105F63443E06
+:107BB0006E4B06D443F99454BEF07E9C672ADFEFE7
+:107BC000EF6C0AC98FE30BA73CBE5B2135E2C7BC53
+:107BD000906B6E0CF9C1FF0BB81F749470470000D6
+:107BE0000000000000000000050207000000000087
+:00000001FF
diff --git a/firmware/bnx2x-e1h-5.0.21.0.fw.ihex b/firmware/bnx2x-e1h-5.0.21.0.fw.ihex
deleted file mode 100644
index e78c863..0000000
--- a/firmware/bnx2x-e1h-5.0.21.0.fw.ihex
+++ /dev/null
@@ -1,12855 +0,0 @@
-:1000000000003BB8000000600000068800003C20B3
-:100010000000192C000042B0000000AC00005BE0C2
-:1000200000008DC400005C90000000E40000EA586D
-:100030000000E4140000EB40000000940001CF58E1
-:10004000000058E80001CFF0000000C4000228E0E2
-:100050000000F978000229A800000004000323280A
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:1001800002040014000000FF02040018000000FF39
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200204203C00000000DE
-:100240000204204000000034020420440000003575
-:10025000060420480000001C020420B80000000131
-:10026000060420BC0000005F0204223807FFFFFFE5
-:100270000204223C0000003F0204224007FFFFFF6F
-:10028000020422440000000F010422480000000084
-:100290000104224C00000000010422500000000074
-:1002A0000104225400000000010422580000000054
-:1002B0000104225C00000000010422600000000034
-:1002C0000104226400000000010422680000000014
-:1002D0000104226C000000000104227000000000F4
-:1002E00001042274000000000104227800000000D4
-:1002F0000104227C000000000C042000000003E840
-:100300000A042000000000010B0420000000000A85
-:1003100002050044000000200205004800000032F1
-:10032000020500900215002002050094021500202D
-:1003300002050098000000300205009C0810000033
-:10034000020500A000000033020500A400000030F8
-:10035000020500A800000031020500AC0000000208
-:10036000020500B000000005020500B40000000610
-:10037000020500B800000002020500BC00000002F7
-:10038000020500C000000000020500C400000005D6
-:10039000020500C800000002020500CC00000002B7
-:1003A000020500D000000002020500D40000000198
-:1003B00002050114000000010205011C00000001FB
-:1003C00002050120000000020205020400000001F5
-:1003D0000205020C0000004002050210000000406F
-:1003E0000205021C0000002002050220000000138C
-:1003F0000205022400000020060502400000000A59
-:1004000004050280002000000205005000000007E3
-:100410000205005400000007020500580000000813
-:100420000205005C000000080205006000000001F9
-:100430000605006400000003020500D80000000665
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C000020500E00000000D020500E80000000742
-:1004D000020500F000000007020500F80000000718
-:1004E000020500E40000002D020500EC00000027DA
-:1004F000020500F400000027020500FC00000027B0
-:10050000020500E00000001D020500E800000017E1
-:10051000020500F000000017020500F800000017B7
-:10052000020500E40000003D020500EC0000003779
-:10053000020500F400000037020500FC000000374F
-:10054000020500E00000004D020500E80000004741
-:10055000020500F000000047020500F80000004717
-:10056000020500E40000006D020500EC00000067D9
-:10057000020500F400000067020500FC00000067AF
-:10058000020500E00000005D020500E800000057E1
-:10059000020500F000000057020500F800000057B7
-:1005A000020500E40000007D020500EC0000007779
-:1005B000020500F400000077020500FC000000774F
-:1005C0000406100002000020020600DC000000010A
-:1005D000010600D80000000004060200000302200B
-:1005E000020600DC00000000010600B80000000068
-:1005F000010600C800000000010600BC0000000069
-:10060000010600CC000000000718040000A900004B
-:10061000081807C800070223071C00002C2D000043
-:10062000071C800038A20B0C071D000028EF1935AD
-:10063000081D681052FE022501180000000000008D
-:10064000011800040000000001180008000000006C
-:100650000118000C0000000001180010000000004C
-:100660000118001400000000021800200000000122
-:1006700002180024000000020218002800000003F5
-:100680000218002C000000000218003000000004D6
-:1006900002180034000000010218003800000000B9
-:1006A0000218003C00000001021800400000000495
-:1006B0000218004400000000021800480000000179
-:1006C0000218004C00000003021800500000000057
-:1006D0000218005400000001021800580000000435
-:1006E0000218005C00000000021800600000000119
-:1006F00002180064000000030218006800000000F7
-:100700000218006C000000010218007000000004D4
-:1007100002180074000000000218007800000004B5
-:100720000218007C00000003061800800000000290
-:10073000021800A400003FFF021800A8000003FFF9
-:100740000218022400000000021802340000000019
-:100750000218024C00000000021802E4000000FF32
-:100760000618100000000400021B8BC000000001EE
-:10077000021B800000000034021B804000000018B3
-:10078000021B80800000000C021B80C000000020C3
-:100790000C1B83000007A1200A1B83000000013806
-:1007A0000B1B830000001388021B83C0000001F4B0
-:1007B000021B1480000000010A1B148000000000CE
-:1007C000061A1000000003B3041A1ECC0001022711
-:1007D000061AA020000000C8061AA00000000002AF
-:1007E000021A1ED000000000061A1ED800000006E3
-:1007F000061A36E800000004061A36E0000000027F
-:10080000061A500000000002061A500800000004FA
-:10081000061A501800000004061A502800000004B0
-:10082000061A503800000004061A50480000000460
-:10083000061A505800000004061A50680000000410
-:10084000061A507800000002041A404000020228F4
-:10085000061A400000000002061A400800000002CC
-:10086000041A62C00020022A061AD1000000000209
-:10087000061A200000000124061AB000000000281B
-:10088000061AB1400000000C061A330000000014E4
-:10089000061A33A000000068061A81080000000252
-:1008A000061AD1C800000002061AD1D800000020A4
-:1008B000061A249000000124061AB0A000000028A7
-:1008C000061AB1700000000C061A33500000001424
-:1008D000061A354000000068061A81100000000268
-:1008E000061AD1D000000002061AD25800000020DB
-:1008F000021A292000000000061A30000000000241
-:10090000041A30080005024A061A301C00000009CB
-:10091000061A320000000008061A5000000000020B
-:10092000061A508000000012061A40000000000263
-:10093000061AD0C000000002021A2924000000009C
-:10094000061A304000000002041A30480005024F29
-:10095000061A305C00000009061A32200000000868
-:10096000061A501000000002061A50C800000012BB
-:10097000061A400800000002061AD0C80000000253
-:10098000021A292800000000061A30800000000228
-:10099000041A308800050254061A309C0000000931
-:1009A000061A324000000008061A5020000000021B
-:1009B000061A511000000012041A401000020259D9
-:1009C000061AD0D000000002021A292C00000000F4
-:1009D000061A30C000000002041A30C80005025B8D
-:1009E000061A30DC00000009061A32600000000818
-:1009F000061A503000000002061A5158000000127A
-:100A0000041A401800020260061AD0D80000000242
-:100A1000021A293000000000061A3100000000020E
-:100A2000041A310800050262061A311C0000000990
-:100A3000061A328000000008061A5040000000022A
-:100A4000061A51A000000012041A4020000202679A
-:100A5000061AD0E000000002021A2934000000004B
-:100A6000061A314000000002041A314800050269EC
-:100A7000061A315C00000009061A32A000000008C6
-:100A8000061A505000000002061A51E80000001239
-:100A9000041A40280002026E061AD0E80000000284
-:100AA000021A293800000000061A318000000002F6
-:100AB000041A318800050270061A319C00000009F2
-:100AC000061A32C000000008061A5060000000023A
-:100AD000061A523000000012041A4030000202755B
-:100AE000061AD0F000000002021A293C00000000A3
-:100AF000061A31C000000002041A31C8000502774E
-:100B0000061A31DC00000009061A32E00000000875
-:100B1000061A507000000002061A527800000012F7
-:100B2000041A40380002027C061AD0F800000002C5
-:100B30000200A294071D29110200A29800000000E3
-:100B40000200A29C009C04240200A2A0000000005D
-:100B50000200A2A4000002090200A270000000002E
-:100B60000200A274000000000200A2700000000059
-:100B70000200A274000000000200A2700000000049
-:100B80000200A274000000000200A2700000000039
-:100B90000200A27400000000020100B40000000185
-:100BA000020100B800000001020100DC00000001A9
-:100BB0000201010000000001020101040000000127
-:100BC0000201007C003000000201008400000028C7
-:100BD0000201008C0000000002010130000000044E
-:100BE0000201025C00000001020103280000000075
-:100BF0000201607000000007020160800000000137
-:100C00000201055400000030020100C40000000190
-:100C1000020100CC00000001020100F80000000108
-:100C2000020100F00000000102010080003000001D
-:100C3000020100880000002802010090000000006E
-:100C40000201013400000004020102DC0000000186
-:100C50000201032C00000000020160740000000784
-:100C60000201608400000001020105640000003000
-:100C7000020100C800000001020100D000000001D4
-:100C8000020100FC00000001020100F4000000016C
-:100C9000020C100000000020020C200800000211CD
-:100CA000020C200C00000200020C201000000204C4
-:100CB000020C201C0000FFFF020C20200000FFFFA0
-:100CC000020C20240000FFFF020C20280000FFFF80
-:100CD000060C203800000002020C20400000003406
-:100CE000020C204400000035020C204800000020C7
-:100CF000020C204C00000021020C205000000022B9
-:100D0000020C205400000023020C20580000002494
-:100D1000020C205C00000025020C20600000002670
-:100D2000020C206400000027020C2068000000284C
-:100D3000020C206C00000029020C20700000002A28
-:100D4000020C20740000002B060C207800000056D6
-:100D5000020C21D000000001020C21D4000000018F
-:100D6000020C21D800000001020C21DC000000016F
-:100D7000020C21E000000001020C21E4000000014F
-:100D8000020C21E800000001020C21EC000000012F
-:100D9000020C21F000000001020C21F4000000010F
-:100DA000060C21F800000010020C223807FFFFFF9C
-:100DB000020C223C0000003F020C224007FFFFFF14
-:100DC000020C22440000000F010C22480000000029
-:100DD000010C224C00000000010C22500000000019
-:100DE000010C225400000000010C225800000000F9
-:100DF000010C225C00000000010C226000000000D9
-:100E0000010C226400000000010C226800000000B8
-:100E1000010C226C00000000010C22700000000098
-:100E2000010C227400000000010C22780000000078
-:100E3000010C227C000000000C0C2000000003E8E4
-:100E40000A0C2000000000010B0C20000000000A2A
-:100E5000020C400800000411020C400C00000400C9
-:100E6000020C401000000404020C40140000042195
-:100E7000020C401C0000FFFF020C40200000FFFF9E
-:100E8000020C40240000FFFF020C40280000FFFF7E
-:100E9000020C403800000046020C403C00000005F7
-:100EA000060C404000000002020C40480000000A0E
-:100EB000020C404C000000F0060C40500000001FE7
-:100EC000020C40CC00000001060C40D00000003AAB
-:100ED000020C41B800000001060C41BC00000003F8
-:100EE000020C41C800000001020C41CC00000001CE
-:100EF000060C41D00000001A020C423807FFFFFF29
-:100F0000020C423C0000003F020C424007FFFFFF82
-:100F1000020C42440000000F010C42480000000097
-:100F2000010C424C00000000010C42500000000087
-:100F3000010C425400000000010C42580000000067
-:100F4000010C425C00000000010C42600000000047
-:100F5000010C426400000000010C42680000000027
-:100F6000010C426C00000000010C42700000000007
-:100F7000010C427400000000010C427800000000E7
-:100F8000010C427C00000000010C428000000000C7
-:100F90000C0C4000000003E80A0C400000000001B7
-:100FA0000B0C40000000000A020D0044000000325B
-:100FB000020D008C02150020020D00900215002089
-:100FC000020D009408100000020D0098000000338C
-:100FD000020D009C00000002020D00A000000000B5
-:100FE000020D00A400000005020D00A8000000058D
-:100FF000060D00AC00000002020D00B4000000026B
-:10100000020D00B800000003020D00BC0000000249
-:10101000020D00C000000001020D00C80000000227
-:10102000020D00CC00000002020D010800000001CA
-:10103000020D015C00000001020D016400000001CE
-:10104000020D016800000002020D02040000000110
-:10105000020D020C00000020020D021000000040F2
-:10106000020D021400000040020D022000000003E7
-:10107000020D022400000018060D0280000000127C
-:10108000040D03000024027E020D004C000000014C
-:10109000020D005000000002020D00540000000884
-:1010A000020D005800000008060D005C000000045E
-:1010B000020D00C400000004020D00040000000145
-:1010C000020D000800000001020D000C00000001EC
-:1010D000020D001000000001020D001400000001CC
-:1010E000020D001800000001020D001C00000001AC
-:1010F000020D002000000001020D0024000000018C
-:10110000020D002800000001020D002C000000016B
-:10111000020D003000000001020D0034000000014B
-:10112000020D003800000001020D003C000000012B
-:10113000020D011400000009020D011C0000000A4C
-:10114000020D012400000007020D012C0000000721
-:10115000020D01340000000C020D013C0000000BE8
-:10116000020D014400000007020D011800000029D3
-:10117000020D01200000002A020D012800000027B6
-:10118000020D013000000027020D01380000002C84
-:10119000020D01400000002B020D01480000002755
-:1011A000020D011400000019020D011C0000001ABC
-:1011B000020D012400000017020D012C0000001791
-:1011C000020D01340000001C020D013C0000001B58
-:1011D000020D014400000017020D01180000003943
-:1011E000020D01200000003A020D01280000003726
-:1011F000020D013000000037020D01380000003CF4
-:10120000020D01400000003B020D014800000037C4
-:10121000020D011400000049020D011C0000004AEB
-:10122000020D012400000047020D012C00000047C0
-:10123000020D01340000004C020D013C0000004B87
-:10124000020D014400000047020D01180000006972
-:10125000020D01200000006A020D01280000006755
-:10126000020D013000000067020D01380000006C23
-:10127000020D01400000006B020D014800000067F4
-:10128000020D011400000059020D011C0000005A5B
-:10129000020D012400000057020D012C0000005730
-:1012A000020D01340000005C020D013C0000005BF7
-:1012B000020D014400000057020D011800000079E2
-:1012C000020D01200000007A020D012800000077C5
-:1012D000020D013000000077020D01380000007C93
-:1012E000020D01400000007B020D01480000007764
-:1012F000020E004C00000032020E00940215002085
-:10130000020E009802150020020E009C0000003022
-:10131000020E00A008100000020E00A4000000331E
-:10132000020E00A800000030020E00AC00000031E8
-:10133000020E00B000000002020E00B40000000423
-:10134000020E00B800000000020E00BC0000000207
-:10135000020E00C000000002020E00C400000000E7
-:10136000020E00C800000002020E00CC00000007C0
-:10137000020E00D000000002020E00D400000002A5
-:10138000020E00D800000001020E00E4000000017F
-:10139000020E014400000001020E014C0000000199
-:1013A000020E015000000002020E020400000001C3
-:1013B000020E020C00000040020E0210000000406D
-:1013C000020E021C00000004020E02200000002099
-:1013D000020E02240000000E020E02280000001B74
-:1013E000060E030000000012040E0280001B02A281
-:1013F000020E00540000000C020E0058000000070E
-:10140000020E005C0000000F020E006000000010E1
-:10141000020E00640000000B060E006800000003CE
-:10142000020E00DC00000003020E000400000001B8
-:10143000020E000800000001020E000C0000000176
-:10144000020E001000000001020E00140000000156
-:10145000020E001800000001020E001C0000000136
-:10146000020E002000000001020E00240000000116
-:10147000020E002800000001020E002C00000001F6
-:10148000020E003000000001020E003400000001D6
-:10149000020E003800000001020E003C00000001B6
-:1014A000020E004000000001020E00440000000196
-:1014B000020E01100000000F020E01180000000EC5
-:1014C000020E012000000000020E012800000000B2
-:1014D000020E01140000002F020E011C0000002E5D
-:1014E000020E012400000000020E012C000000008A
-:1014F000020E01100000001F020E01180000001E65
-:10150000020E012000000000020E01280000000071
-:10151000020E01140000003F020E011C0000003EFC
-:10152000020E012400000000020E012C0000000049
-:10153000020E01100000004F020E01180000004EC4
-:10154000020E012000000000020E01280000000031
-:10155000020E01140000006F020E011C0000006E5C
-:10156000020E012400000000020E012C0000000009
-:10157000020E01100000005F020E01180000005E64
-:10158000020E012000000000020E012800000000F1
-:10159000020E01140000007F020E011C0000007EFC
-:1015A000020E012400000000020E012C00000000C9
-:1015B0000730040000E10000083007D8000502BD34
-:1015C000073400002ECA000007348000311A0BB324
-:1015D00007350000368B17FA0735800039C6259D80
-:1015E0000736000013D5340F0836307039F202BFC9
-:1015F0000130000000000000013000040000000085
-:1016000001300008000000000130000C0000000064
-:101610000130001000000000013000140000000044
-:10162000023000200000000102300024000000020F
-:1016300002300028000000030230002C00000000EF
-:1016400002300030000000040230003400000001CD
-:1016500002300038000000000230003C00000001B1
-:10166000023000400000000402300044000000008E
-:1016700002300048000000010230004C000000036E
-:101680000230005000000000023000540000000151
-:1016900002300058000000040230005C000000002E
-:1016A000023000600000000102300064000000030E
-:1016B00002300068000000000230006C00000001F1
-:1016C00002300070000000040230007400000000CE
-:1016D00002300078000000040230007C00000003AB
-:1016E0000630008000000002023000A400003FFF2E
-:1016F000023000A8000003FF0230022400000000B6
-:1017000002300234000000000230024C00000000F1
-:10171000023002E40000FFFF063020000000080055
-:1017200002338BC000000001023380000000001A69
-:10173000023380400000004E023380800000001021
-:10174000023380C0000000200C3383000007A1207A
-:101750000A338300000001380B3383000000138834
-:10176000023383C0000001F40C3383801DCD65007B
-:101770000A3383800004C4B40B338380004C4B4095
-:101780000A331480000000000233148000000001BE
-:10179000063220000000010206328020000000C84E
-:1017A000063280000000000206323DA8000000045E
-:1017B00006323D800000000904323DA4000102C150
-:1017C00006323D00000000200632500000000400F8
-:1017D000063240000000000204324008000102C24C
-:1017E0000632400C00000003063240D80000000220
-:1017F00006326B680000000204326B70000202C304
-:1018000006326B1000000002043274C0000202C5F0
-:101810000632DA40000000020632E0000000080054
-:10182000023308000100000004330C00001002C75E
-:10183000023308000000000004330C40001002D7FF
-:1018400006322450000000B406322AD00000000204
-:1018500006321000000001A002323DB80000000076
-:101860000632500000000020063251000000002027
-:101870000632520000000020063253000000002013
-:1018800006325400000000200632550000000020FF
-:1018900006325600000000200632570000000020EB
-:1018A00006325800000000200632590000000020D7
-:1018B00006325A000000002006325B0000000020C3
-:1018C00006325C000000002006325D0000000020AF
-:1018D00006325E000000002006325F00000000209B
-:1018E00006326B780000005206326E080000000CD1
-:1018F0000632DA880000000206322720000000B419
-:1019000006322AD80000000206321680000001A02C
-:1019100002323DBC00000000063250800000002072
-:101920000632518000000020063252800000002064
-:101930000632538000000020063254800000002050
-:10194000063255800000002006325680000000203C
-:101950000632578000000020063258800000002028
-:10196000063259800000002006325A800000002014
-:1019700006325B800000002006325C800000002000
-:1019800006325D800000002006325E8000000020EC
-:1019900006325F800000002006326CC0000000525A
-:1019A00006326E380000000C0632DA9000000002A9
-:1019B00002322A3000000000063240180000000207
-:1019C0000632D0000000000602322A340000000077
-:1019D00006324028000000020632D018000000063F
-:1019E00002322A38000000000632403800000002AF
-:1019F0000632D0300000000602322A3C000000000F
-:101A000006324048000000020632D04800000006BE
-:101A100002322A4000000000063240580000000256
-:101A20000632D0600000000602322A4400000000A6
-:101A300006324068000000020632D078000000063E
-:101A400002322A48000000000632407800000002FE
-:101A50000632D0900000000602322A4C000000003E
-:101A600006324088000000020632D0A800000006BE
-:101A7000072004000093000008200780001002E700
-:101A8000072400002ADF0000072480002E050AB882
-:101A90000824E4A061D202E9012000000000000057
-:101AA00001200004000000000120000800000000E8
-:101AB0000120000C000000000120001000000000C8
-:101AC000012000140000000002200020000000019E
-:101AD0000220002400000002022000280000000371
-:101AE0000220002C00000000022000300000000452
-:101AF0000220003400000001022000380000000035
-:101B00000220003C00000001022000400000000410
-:101B100002200044000000000220004800000001F4
-:101B20000220004C000000030220005000000000D2
-:101B300002200054000000010220005800000004B0
-:101B40000220005C00000000022000600000000194
-:101B50000220006400000003022000680000000072
-:101B60000220006C00000001022000700000000450
-:101B70000220007400000000022000780000000431
-:101B80000220007C0000000306200080000000020C
-:101B9000022000A400003FFF022000A8000003FF75
-:101BA0000220022400000000022002340000000095
-:101BB0000220024C00000000022002E40000FFFFAF
-:101BC000062020000000080002238BC00000000156
-:101BD0000223800000000010022380400000001259
-:101BE0000223808000000030022380C00000000E2D
-:101BF000022383C0000001F40223148000000001CE
-:101C00000A23148000000000062210000000004299
-:101C100006227020000000C80622700000000002AA
-:101C2000022211E80000000006223000000000C07F
-:101C3000062240700000008006225280000000044E
-:101C40000622670000000100062290000000040048
-:101C500004226B08002002EB02230800013FFFFF73
-:101C600004230C000010030B0223080000000000F6
-:101C700004230C400010031B06228100000000A07A
-:101C8000062286000000004006228C000000003C76
-:101C90000622B0000000020006228800000000803A
-:101CA00006228DE00000003C0622404000000006B5
-:101CB00006228380000000A006228700000000406A
-:101CC00006228CF00000003C0622B8000000020052
-:101CD00006228A000000008006228ED00000003C10
-:101CE000062240580000000606228000000000087E
-:101CF000022211480000000006223300000000020A
-:101D0000062260400000003006228020000000080B
-:101D10000222114C000000000622330800000002DD
-:101D2000062261000000003006228040000000080A
-:101D300002221150000000000622331000000002B1
-:101D4000062261C00000003006228060000000080A
-:101D50000222115400000000062233180000000285
-:101D60000622628000000030062280800000000809
-:101D70000222115800000000062233200000000259
-:101D80000622634000000030062280A00000000808
-:101D90000222115C0000000006223328000000022D
-:101DA0000622640000000030062280C00000000807
-:101DB0000222116000000000062233300000000201
-:101DC000062264C000000030062280E00000000807
-:101DD00002221164000000000622333800000002D5
-:101DE0000622658000000030021610000000002866
-:101DF00002170008000000020217002C0000000378
-:101E00000217003C00000004021700440000000814
-:101E100002170048000000020217004C000000906A
-:101E2000021700500000009002170054008000903C
-:101E30000217005808140000021700600000008A12
-:101E40000217006400000080021700680000008193
-:101E50000217006C000000800217007000000006EE
-:101E600002170078000007D00217007C0000076C02
-:101E700002170038007C1004021700040000000F55
-:101E80000616402400000002021640700000001CEC
-:101E90000216420800000001021642100000000174
-:101EA0000216422000000001021642280000000134
-:101EB0000216423000000001021642380000000104
-:101EC00002164260000000020C16401C0003D09075
-:101ED0000A16401C0000009C0B16401C000009C4A0
-:101EE0000216403000000008021640340000000CCA
-:101EF0000216403800000010021640440000002086
-:101F00000216400000000001021640D80000000147
-:101F100002164008000000010216400C00000001FB
-:101F200002164010000000010216424000000000AE
-:101F3000021642480000000006164270000000022F
-:101F40000216425000000000021642580000000035
-:101F500006164280000000020216600800000424F9
-:101F60000216600C00000410021660100000041439
-:101F70000216601C0000FFFF021660200000FFFF39
-:101F8000021660240000FFFF021660280000FFFF19
-:101F900002166038000000200216603C000000209D
-:101FA0000216604000000034021660440000003554
-:101FB00002166048000000230216604C0000002456
-:101FC0000216605000000025021660540000002632
-:101FD00002166058000000270216605C000000290D
-:101FE000021660600000002A021660640000002BE8
-:101FF000021660680000002C0216606C0000002DC4
-:102000000616607000000052021661B80000000160
-:10201000061661BC0000001F0216623807FFFFFFB2
-:102020000216623C0000003F0216624007FFFFFFFD
-:10203000021662440000000F011662480000000012
-:102040000116624C00000000011662500000000002
-:1020500001166254000000000116625800000000E2
-:102060000116625C000000000116626000000000C2
-:1020700001166264000000000116626800000000A2
-:102080000116626C00000000011662700000000082
-:102090000116627400000000011662780000000062
-:1020A0000116627C000000000C166000000003E8CE
-:1020B0000A166000000000010B1660000000000A14
-:1020C0000216804000000006021680440000000551
-:1020D000021680480000000A0216804C000000052D
-:1020E0000216805400000002021680CC000000049A
-:1020F000021680D000000004021680D40000000404
-:10210000021680D800000004021680DC00000004E3
-:10211000021680E000000004021680E400000004C3
-:10212000021680E800000004021688040000000483
-:10213000021680300000007C021680340000003D52
-:10214000021680380000003F0216803C0000009C10
-:10215000021680F000000007061680F4000000055B
-:102160000216880C0101010102168108000000001E
-:102170000216810C00000004021681100000000409
-:1021800002168114000000020216881008012004C3
-:1021900002168118000000050216811C00000005CF
-:1021A00002168120000000050216812400000005AF
-:1021B0000216882C20081001021681280000000851
-:1021C0000216812C00000006021681300000000774
-:1021D000021681340000000002168830010101203F
-:1021E000061681380000000402168834010101013E
-:1021F00002168148000000000216814C0000000415
-:1022000002168150000000040216815400000002F2
-:1022100002168838080120040216815800000005C3
-:102220000216815C000000050216816000000005B6
-:1022300002168164000000050216883C2008100187
-:1022400002168168000000080216816C000000067A
-:102250000216817000000007021681740000000160
-:102260000216884001010120021681780000000159
-:102270000216817C0000000102168180000000012E
-:102280000216818400000001021688440101010148
-:1022900002168188000000010216818C00000004F3
-:1022A00002168190000000040216819400000002D2
-:1022B00002168848080120040216819800000005D3
-:1022C0000216819C00000005021681A00000000596
-:1022D000021681A4000000050216881420081001CF
-:1022E000021681A800000008021681AC000000065A
-:1022F000021681B000000007021681B40000000140
-:102300000216881801010120021681B800000001A0
-:10231000021681BC00000001021681C0000000010D
-:10232000021681C4000000010216881C010101018F
-:10233000021681C800000001021681CC00000004D2
-:10234000021681D000000004021681D400000002B1
-:102350000216882008012004021681D8000000051A
-:10236000021681DC00000005021681E00000000575
-:10237000021681E4000000050216882420081001DE
-:10238000021681E800000008021681EC0000000639
-:10239000021681F0000000070216E40C00000000A5
-:1023A00002168828010101200616E410000000042E
-:1023B0000216E000010101010216E4200000000005
-:1023C0000216E424000000040216E42800000004C1
-:1023D0000216E42C000000020216E00408012004AA
-:1023E0000216E430000000050216E4340000000587
-:1023F0000216E438000000050216E43C0000000567
-:102400000216E008200810010216E440000000084F
-:102410000216E444000000060216E448000000072B
-:102420000216E44C000000000216E00C010101203D
-:102430000616E450000000040216E010010101013C
-:102440000216E460000000000216E46400000004CC
-:102450000216E468000000040216E46C00000002AA
-:102460000216E014080120040216E47000000005C2
-:102470000216E474000000050216E478000000056E
-:102480000216E47C000000050216E0182008100186
-:102490000216E480000000080216E4840000000632
-:1024A0000216E488000000070216E48C0000000118
-:1024B0000216E01C010101200216E4900000000158
-:1024C0000216E494000000010216E49800000001E6
-:1024D0000216E49C000000010216E0200101010147
-:1024E0000216E4A0000000010216E4A400000004AB
-:1024F0000216E4A8000000040216E4AC000000028A
-:102500000216E024080120040216E4B000000005D1
-:102510000216E4B4000000050216E4B8000000054D
-:102520000216E4BC000000050216E0282008100195
-:102530000216E4C0000000080216E4C40000000611
-:102540000216E4C8000000070216E4CC00000001F7
-:102550000216E02C010101200216E4D00000000167
-:102560000216E4D4000000010216E4D800000001C5
-:102570000216E4DC000000010216E0300101010156
-:102580000216E4E0000000010216E4E4000000048A
-:102590000216E4E8000000040216E4EC0000000269
-:1025A0000216E034080120040216E4F000000005E1
-:1025B0000216E4F4000000050216E4F8000000052D
-:1025C0000216E4FC000000050216E03820081001A5
-:1025D0000216E500000000080216E50400000006EF
-:1025E0000216E508000000070216E03C0101012088
-:1025F00002168240003F003F0216824400000000A5
-:102600000216E524003F003F0216E5280000000006
-:1026100002168248000000000216824C003F003F74
-:102620000216E52C000000000216E530003F003FD6
-:1026300002168250010001000216825401000100BE
-:102640000216E534010001000216E5380100010020
-:1026500006168258000000020216E53C0000000049
-:102660000216E540000000000216826000C000C0B3
-:102670000216826400C000C00216E54400C000C01B
-:102680000216E54800C000C0021682681E001E0047
-:102690000216826C1E001E000216E54C1E001E0073
-:1026A0000216E5501E001E00021682704000400017
-:1026B00002168274400040000216E55440004000BB
-:1026C0000216E55840004000021682788000800023
-:1026D0000216827C800080000216E55C800080008B
-:1026E0000216E56080008000021682802000200033
-:1026F00002168284200020000216E56420002000DB
-:102700000216E568200020000616828800000002FC
-:102710000216E56C000000000216E57000000000E3
-:102720000216829000000000021682940000000051
-:102730000216E574000000000216E57800000000B3
-:1027400002168298000000000216829C0000000021
-:102750000216E57C000000000216E5800000000083
-:10276000021682A000000000021682A400000001F0
-:10277000061682A80000000A021681F400000C0868
-:10278000021681F800000040021681FC00000100E2
-:1027900002168200000000200216820400000017CA
-:1027A00002168208000000800216820C000002005F
-:1027B00002168210000000000216821801FF01FFBD
-:1027C0000216821401FF01FF0216E51001FF01FF4E
-:1027D0000216E50C01FF01FF0216823C0000001307
-:1027E000021680900000013F021680600000014048
-:1027F0000216806400000140061680680000000296
-:1028000002168070000000C00616807400000007E9
-:102810000216809C00000048021680A000000048BC
-:10282000061680A400000002021680AC00000048DA
-:10283000061680B0000000070216823800008000F3
-:1028400002168234000025E40216809400007FFF07
-:1028500002168220000F000F0216821C000F000FCC
-:102860000216E518000F000F0216E514000F000F06
-:10287000021682280000000002168224FFFFFFFFDC
-:102880000216E520000000000216E51CFFFFFFFF16
-:102890000216E6BC000000000216E6C000000002BE
-:1028A0000216E6C4000000010216E6C8000000039C
-:1028B0000216E6CC000000040216E6D00000000676
-:1028C0000216E6D4000000050216E6D80000000754
-:1028D000021680EC000000FF02140000000000015E
-:1028E0000214000C0000000102140040000000016E
-:1028F0000214004400007FFF0214000C00000000DE
-:1029000002140000000000000214006C000000002F
-:102910000214000400000001021400300000000155
-:1029200002140004000000000214005C000000001B
-:10293000021400080000000102140034000000012D
-:1029400002140008000000000214006000000000F3
-:102950000202005800000032020200A0031500200D
-:10296000020200A403150020020200A801000030AA
-:10297000020200AC08100000020200B000000033A8
-:10298000020200B400000030020200B80000003172
-:10299000020200BC00000003020200C000000006AA
-:1029A000020200C400000003020200C8000000038D
-:1029B000020200CC00000002020200D00000000071
-:1029C000020200D400000002020200DC000000004D
-:1029D000020200E000000006020200E40000000421
-:1029E000020200E800000002020200EC0000000207
-:1029F000020200F000000001020200FC00000006DC
-:102A00000202012000000000020201340000000266
-:102A1000020201B0000000010202020C00000001ED
-:102A2000020202140000000102020218000000026B
-:102A300002020404000000010202040C0000004035
-:102A400002020410000000400202041C0000000406
-:102A50000202042000000020020204240000000200
-:102A600002020428000000200602050000000012F7
-:102A700004020480001F032B020200600000000F0C
-:102A80000202006400000007020200680000000B60
-:102A90000202006C0000000E020200700000000E36
-:102AA0000602007400000003020200F400000004AB
-:102AB0000202000400000001020200080000000100
-:102AC0000202000C000000010202001000000001E0
-:102AD00002020014000000010202001800000001C0
-:102AE0000202001C000000010202002000000001A0
-:102AF0000202002400000001020200280000000180
-:102B00000202002C0000000102020030000000015F
-:102B1000020200340000000102020038000000013F
-:102B20000202003C0000000102020040000000011F
-:102B300002020044000000010202004800000001FF
-:102B40000202004C000000010202005000000001DF
-:102B500002020108000000C8020201180000000281
-:102B6000020201C400000000020201CC00000000CB
-:102B7000020201D400000002020201DC0000000297
-:102B8000020201E4000000FF020201EC000000FF6D
-:102B900002020100000000000202010C000000C857
-:102BA0000202011C00000002020201C80000000035
-:102BB000020201D000000000020201D80000000261
-:102BC000020201E000000002020201E8000000FF32
-:102BD000020201F0000000FF0202010400000000F8
-:102BE00002020108000000C80202011800000002F1
-:102BF000020201C400000000020201CC000000003B
-:102C0000020201D400000002020201DC0000000206
-:102C1000020201E4000000FF020201EC000000FFDC
-:102C200002020100000000000202010C000000C8C6
-:102C30000202011C00000002020201C800000000A4
-:102C4000020201D000000000020201D800000002D0
-:102C5000020201E000000002020201E8000000FFA1
-:102C6000020201F0000000FF020201040000000067
-:102C700002020108000000C8020201180000000260
-:102C8000020201C400000000020201CC00000000AA
-:102C9000020201D400000002020201DC0000000276
-:102CA000020201E4000000FF020201EC000000FF4C
-:102CB00002020100000000000202010C000000C836
-:102CC0000202011C00000002020201C80000000014
-:102CD000020201D000000000020201D80000000240
-:102CE000020201E000000002020201E8000000FF11
-:102CF000020201F0000000FF0202010400000000D7
-:102D000002020108000000C80202011800000002CF
-:102D1000020201C400000000020201CC0000000019
-:102D2000020201D400000002020201DC00000002E5
-:102D3000020201E4000000FF020201EC000000FFBB
-:102D400002020100000000000202010C000000C8A5
-:102D50000202011C00000002020201C80000000083
-:102D6000020201D000000000020201D800000002AF
-:102D7000020201E000000002020201E8000000FF80
-:102D8000020201F0000000FF020201040000000046
-:102D90000728040000C00000082807A8000B034A09
-:102DA000072C000032FD0000072C8000357E0CC08F
-:102DB000072D00003AE41A20072D800039CF28DAC9
-:102DC000072E00001C3C374E082E3710391E034CCE
-:102DD000012800000000000001280004000000009D
-:102DE00001280008000000000128000C000000007D
-:102DF000012800100000000001280014000000005D
-:102E00000228002000000001022800240000000227
-:102E100002280028000000030228002C0000000007
-:102E200002280030000000040228003400000001E5
-:102E300002280038000000000228003C00000001C9
-:102E400002280040000000040228004400000000A6
-:102E500002280048000000010228004C0000000386
-:102E60000228005000000000022800540000000169
-:102E700002280058000000040228005C0000000046
-:102E80000228006000000001022800640000000326
-:102E900002280068000000000228006C0000000109
-:102EA00002280070000000040228007400000000E6
-:102EB00002280078000000040228007C00000003C3
-:102EC0000628008000000002022800A400003FFF46
-:102ED000022800A8000003FF0228022400000000CE
-:102EE00002280234000000000228024C000000000A
-:102EF000022802E40000FFFF06282000000008006E
-:102F0000022B8BC000000001022B8000000000009B
-:102F1000022B804000000018022B80800000000C73
-:102F2000022B80C0000000660C2B83000007A1204C
-:102F30000A2B8300000001380B2B8300000013884C
-:102F4000022B83C0000001F40C2B8340000001F42D
-:102F50000A2B8340000000000B2B8340000000057B
-:102F60000A2B83800004C4B40C2B83801DCD650024
-:102F70000A2B1480000000000B2B8380004C4B4078
-:102F8000022B148000000001062A29C8000000045A
-:102F9000042A29D80002034E062A20800000004897
-:102FA000062A9020000000C8062A900000000002B7
-:102FB000062A21A800000086062A20000000002022
-:102FC000022A23C800000000042A23D00002035074
-:102FD000042A249800040352022A2C500000000006
-:102FE000022A2C1000000000042A2C0800020356BC
-:102FF000042A300000020358062A300800000100AD
-:10300000062A404000000010042A40000010035A25
-:10301000062A6AC000000002062A6B0000000004B5
-:10302000042A84080002036A022B08000000000042
-:10303000042B0C000010036C022B080001000000A0
-:10304000042B0C400008037C022B08000200000047
-:10305000042B0C6000080384062AC000000000D87E
-:10306000062A24A800000014062A2548000000248F
-:10307000062A266800000024062A2788000000246B
-:10308000062A28A800000024062AA0000000002824
-:10309000062AA1400000000C042A29E00002038C4B
-:1030A000062A502000000002062A503000000002CC
-:1030B000062A500000000002062A501000000002FC
-:1030C000022A520800000001042A6AC80002038E86
-:1030D000062A6B1000000042062A6D200000000442
-:1030E000062ABCD000000002062AC360000000D8F7
-:1030F000062A24F800000014062A25D8000000241F
-:10310000062A26F800000024062A281800000024B9
-:10311000062A293800000024062AA0A00000002862
-:10312000062AA1700000000C042A29E8000203907E
-:10313000062A502800000002062A5038000000022B
-:10314000062A500800000002062A5018000000025B
-:10315000022A520C00000001042A6AD000020392E5
-:10316000062A6C1800000042062A6D300000000498
-:10317000062ABCD800000002022AC6C000000000D7
-:10318000042A29F000100394062A50480000000E7B
-:10319000062AB00000000006022AC6C40000000093
-:1031A000042A2A30001003A4062A50800000000ED2
-:1031B000062AB01800000006022AC6C80000000057
-:1031C000042A2A70001003B4062A50B80000000E2A
-:1031D000062AB03000000006022AC6CC000000001B
-:1031E000042A2AB0001003C4062A50F00000000E82
-:1031F000062AB04800000006022AC6D000000000DF
-:10320000042A2AF0001003D4062A51280000000ED8
-:10321000062AB06000000006022AC6D400000000A2
-:10322000042A2B30001003E4062A51600000000E2F
-:10323000062AB07800000006022AC6D80000000066
-:10324000042A2B70001003F4062A51980000000E87
-:10325000062AB09000000006022AC6DC000000002A
-:10326000042A2BB000100404062A51D00000000EDE
-:10327000062AB0A800000006021010080000000195
-:103280000210105000000001021010000003D000D6
-:10329000021010040000003D091018000200041480
-:1032A0000910110000280614061011A000000018D3
-:1032B00006102400000000E00210201C00000000A6
-:1032C0000210202000000001021020C000000002B7
-:1032D000021020040000000102102008000000017C
-:1032E00009103C000005063C0910380000050641A5
-:1032F000091038200005064606104C0000000100A9
-:1033000002104028000000100210404400003FFF5F
-:103310000210405800280000021040840084924AA5
-:1033200002104058000000000210800000001080D1
-:10333000021080AC00000000021080380000001075
-:103340000210810000000000061081200000000231
-:1033500002108008000002B502108010000000007A
-:10336000061082000000004A021081080001FFFFE1
-:1033700006108140000000020210800000001A8048
-:103380000610900000000024061091200000004A62
-:10339000061093700000004A061095C00000004A15
-:1033A0000210800400001080021080B000000001B4
-:1033B0000210803C00000010021081040000000098
-:1033C00006108128000000020210800C000002B5E7
-:1033D0000210801400000000061084000000004A63
-:1033E0000210810C0001FFFF06108148000000025E
-:1033F0000210800400001A80061090900000002443
-:10340000061092480000004A061094980000004AF6
-:10341000061096E80000004A0210800000001080AC
-:10342000021080AC00000002021080380000001082
-:103430000210810000000000061081200000000240
-:1034400002108008000002B5021080100000000089
-:10345000061082000000004A021081080001FFFFF0
-:1034600006108140000000020210800000001A8057
-:103470000610900000000024061091200000004A71
-:10348000061093700000004A061095C00000004A24
-:103490000210800400001080021080B000000003C1
-:1034A0000210803C000000100210810400000000A7
-:1034B00006108128000000020210800C000002B5F6
-:1034C0000210801400000000061084000000004A72
-:1034D0000210810C0001FFFF06108148000000026D
-:1034E0000210800400001A80061090900000002452
-:1034F000061092480000004A061094980000004A06
-:10350000061096E80000004A0210800000001080BB
-:10351000021080AC0000000402108038000000108F
-:10352000021081000000000006108120000000024F
-:1035300002108008000002B5021080100000000098
-:10354000061082000000004A021081080001FFFFFF
-:1035500006108140000000020210800000001A8066
-:103560000610900000000024061091200000004A80
-:10357000061093700000004A061095C00000004A33
-:103580000210800400001080021080B000000005CE
-:103590000210803C000000100210810400000000B6
-:1035A00006108128000000020210800C000002B505
-:1035B0000210801400000000061084000000004A81
-:1035C0000210810C0001FFFF06108148000000027C
-:1035D0000210800400001A80061090900000002461
-:1035E000061092480000004A061094980000004A15
-:1035F000061096E80000004A0210800000001080CB
-:10360000021080AC0000000602108038000000109C
-:10361000021081000000000006108120000000025E
-:1036200002108008000002B50210801000000000A7
-:10363000061082000000004A021081080001FFFF0E
-:1036400006108140000000020210800000001A8075
-:103650000610900000000024061091200000004A8F
-:10366000061093700000004A061095C00000004A42
-:103670000210800400001080021080B000000007DB
-:103680000210803C000000100210810400000000C5
-:1036900006108128000000020210800C000002B514
-:1036A0000210801400000000061084000000004A90
-:1036B0000210810C0001FFFF06108148000000028B
-:1036C0000210800400001A80061090900000002470
-:1036D000061092480000004A061094980000004A24
-:1036E000061096E80000004A021205B00000000132
-:1036F0000212049000E383400212051400003C1003
-:103700000212066C000000010212067000000000A8
-:1037100002120494FFFFFFFF02120498FFFFFFFF55
-:103720000212049CFFFFFFFF021204A0FFFFFFFF35
-:10373000021204A4FFFFFFFF021204A8FFFFFFFF15
-:10374000021204ACFFFFFFFF021204B0FFFFFFFFF5
-:10375000021204BCFFFFFFFF021204C0FFFFFFFFC5
-:10376000021204C4FFFFFFFF021204C8FFFFFFFFA5
-:10377000021204CCFFFFFFFF021204D0FFFFFFFF85
-:10378000021204D8FFFFFFFF021204DCFFFFFFFF5D
-:10379000021204E0FFFFFFFF021204E4FFFFFFFF3D
-:1037A000021204E8FFFFFFFF021204ECFFFFFFFF1D
-:1037B000021204F0FFFFFFFF021204F4FFFFFFFFFD
-:1037C000021204F8FFFFFFFF021204FCFFFFFFFFDD
-:1037D00002120500FFFFFFFF02120504FFFFFFFFBB
-:1037E00002120508FFFFFFFF0212050CFFFFFFFF9B
-:1037F00002120510FFFFFFFF021204D4FF80200019
-:10380000021204B4F0005000021204B8F0001000DC
-:1038100002120390000000080212039C000000083E
-:10382000021203A000000008021203A4000000021C
-:10383000021203BC00000004021203C000000005D5
-:10384000021203C400000004021203D000000000B2
-:103850000212036C00000001021203680000003F26
-:10386000021201BC00000040021201C00000180852
-:10387000021201C400000803021201C8000008037C
-:10388000021201CC00000040021201D0000000032F
-:10389000021201D400000803021201D8000008033C
-:1038A000021201DC00000803021201E00001000323
-:1038B000021201E400000803021201E800000803FC
-:1038C000021201EC00000003021201F000000003EC
-:1038D000021201F400000003021201F800000003CC
-:1038E000021201FC000000030212020000000003AB
-:1038F000021202040000000302120208000000038A
-:103900000212020C00000003021202100000000369
-:103910000212021400000003021202180000000349
-:103920000212021C00000003021202200000000329
-:1039300002120224000000030212022800002403E5
-:103940000212022C0000002F0212023000000009B7
-:103950000212023400000019021202380000018431
-:103960000212023C00000183021202400000030622
-:103970000212024400000019021202480000000670
-:103980000212024C0000030602120250000003065D
-:1039900002120254000003060212025800000C86B4
-:1039A0000212025C0000030602120260000003061D
-:1039B0000212026400000006021202680000000603
-:1039C0000212026C000000060212027000000006E3
-:1039D00002120274000000060212027800000006C3
-:1039E0000212027C000000060212028000000006A3
-:1039F0000212028400000006021202880000000683
-:103A00000212028C00000006021202900000000662
-:103A10000212029400000006021202980000000642
-:103A20000212029C00000006021202A0000003061F
-:103A3000021202A400000013021202A800000006F5
-:103A4000021202B000001004021202B400001004BE
-:103A50000212032400106440021203280010644084
-:103A6000021205B400000001021201B000000001C2
-:103A70000600A000000000160200A0EC5554000053
-:103A80000200A0F0555555550200A0F40000555510
-:103A90000200A0F8F00000000200A0FC5554000055
-:103AA0000200A100555555550200A10400005555CE
-:103AB0000200A108F00000000200A18C5554000093
-:103AC0000200A190555555550200A194000055558E
-:103AD0000200A198F00000000200A19C000000007C
-:103AE0000200A1A0000100000200A1A400005014E7
-:103AF0000200A1A8000000000200A45C00000C006D
-:103B00000200A61C000000030200A06CFF5C000085
-:103B10000200A070FFF55FFF0200A0740000FFFF2D
-:103B20000200A078F00003E00200A07C000000008A
-:103B30000200A0800000A0000600A0840000000594
-:103B40000200A0980FE000000600A09C0000000703
-:103B50000200A0B8000004000600A0BC00000003A2
-:103B60000200A0C8000010000600A0CC0000000366
-:103B70000200A0D8000040000600A0DC0000000306
-:103B80000200A0E8000100000600A22C00000004D2
-:103B90000200A10CFF5C00000200A110FFF55FFF16
-:103BA0000200A1140000FFFF0200A118F00003E0D2
-:103BB0000200A11C000000000200A1200000A000E3
-:103BC0000600A124000000050200A1380FE000005B
-:103BD0000600A13C000000070200A15800000800F8
-:103BE0000600A15C000000030200A16800002000A4
-:103BF0000600A16C000000030200A1780000800014
-:103C00000600A17C000000030200A1880002000061
-:103C10000600A23C000000040000000000000000BC
-:103C20000000003100000000000000000000000063
-:103C30000000000000000000000000000000000084
-:103C40000000000000000000000000000031003211
-:103C50000000000000000000000000000000000064
-:103C60000000000000000000000000000000000054
-:103C700000000000000000000032005600000000BC
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA000000000000056008C000000000000000032
-:103CB000008C009000900094009400980098009C64
-:103CC000009C00A000A000A400A400A800A800ACD4
-:103CD00000AC00B100B100B300B300B500000000BB
-:103CE00000000000000000000000000000000000D4
-:103CF00000000000000000000000000000B501020C
-:103D00000102010A010A01120112011B011B012417
-:103D10000124012D012D01360136013F013F0148EB
-:103D2000014801510151015A00000000000000004B
-:103D30000000000000000000000000000000000083
-:103D40000000000000000000000000000000000073
-:103D50000000000000000000000000000000000063
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD0000000000000000000015A015F0000000028
-:103DE00000000000015F016001600161016101628A
-:103DF000016201630163016401640165016501669B
-:103E000001660167000000000000000000000000E3
-:103E100000000000000000000000000000000000A2
-:103E20000000000000000000000000000000000092
-:103E30000167016C016C01790179018600000000C5
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000000000000000000000000000000000052
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000018601870000000023
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB00000000000018701BE0000000000000000BB
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE00001BE01E900000000000000000000000029
-:103EF00000000000000000000000000000000000C2
-:103F000000000000000000000000000001E9021AAB
-:103F10000000000000000000021A02210221022815
-:103F20000228022F022F02360236023D023D0244D1
-:103F30000244024B024B02520252028A000000006D
-:103F400000000000028A028E028E02920292029605
-:103F50000296029A029A029E029E02A202A202A661
-:103F600002A602AA02AA02FC02FC03130313032AFC
-:103F7000032A032D032D03300330033303330336A9
-:103F8000033603390339033C033C033F033F034239
-:103F9000034203830383038A038A039103910395F6
-:103FA000039503990399039D039D03A103A103A511
-:103FB00003A503A903A903AD03AD03B103B103B284
-:103FC00000000000000000000000000000000000F1
-:103FD00000000000000000000000000000000000E1
-:103FE000000000000000000003B203C40000000055
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:104010000000000003C403D903D903DC03DC03DF81
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:1040400003DF040C0000000000000000000000007E
-:104050000000000000000000000000000000000060
-:10406000000000000000000000000000040C050F2C
-:104070000000000000000000000000000000000040
-:104080000000000000000000000000000000000030
-:104090000000000000000000050F05160516051AB7
-:1040A000051A051E000000000000000000000000CE
-:1040B0000000000000000000000000000000000000
-:1040C00000000000051E055E00000000000000006A
-:1040D000055E056705670570057005790579058238
-:1040E0000582058B058B05940594059D059D05A608
-:1040F00005A605FF05FF0611061106230623062760
-:104100000627062B062B062F062F06330633063707
-:104110000637063B063B063F063F06430643064A74
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:104140000000000000000000064A065000000000C9
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:104170000000000006500653000000000000000090
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A0000653065900000000000000000000000057
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D0000000000000000000065906680668067727
-:1041E0000677068606860695069506A406A406B3F7
-:1041F00006B306C206C206D106D10742000000007F
-:1042000000000000000000000000000000000000AE
-:10421000000000000000000000000000000000009E
-:104220000000000007420755075507660766077735
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000000000000000000000000005E
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000010000000204C00003098000040E4059
-:1042C00000051300000617C000071C8000082140ED
-:1042D00000092600000A2AC0000B2F80000C344081
-:1042E000000D3900000E3DC0000F42800010474015
-:1042F00000114C00001250C00013558000145A40A9
-:1043000000155F00001663C00017688000186D403C
-:1043100000197200001A76C0001B7B80001C8040D0
-:10432000001D8500001E89C0001F8E800020934064
-:10433000000020000000400000006000000080003D
-:104340000000A0000000C0000000E000000100002C
-:104350000001200000014000000160000001800019
-:104360000001A0000001C0000001E0000002000008
-:1043700000022000000240000002600000028000F5
-:104380000002A0000002C0000002E00000030000E4
-:1043900000032000000340000003600000038000D1
-:1043A0000003A0000003C0000003E00000040000C0
-:1043B00000042000000440000004600000048000AD
-:1043C0000004A0000004C0000004E000000500009C
-:1043D0000005200000054000000560000005800089
-:1043E0000005A0000005C0000005E0000006000078
-:1043F0000006200000064000000660000006800065
-:104400000006A0000006C0000006E0000007000053
-:104410000007200000074000000760000007800040
-:104420000007A0000007C0000007E000000800002F
-:10443000000820000008400000086000000880001C
-:104440000008A0000008C0000008E000000900000B
-:1044500000092000000940000009600000098000F8
-:104460000009A0000009C0000009E000000A0000E7
-:10447000000A2000000A4000000A6000000A8000D4
-:10448000000AA000000AC000000AE000000B0000C3
-:10449000000B2000000B4000000B6000000B8000B0
-:1044A000000BA000000BC000000BE000000C00009F
-:1044B000000C2000000C4000000C6000000C80008C
-:1044C000000CA000000CC000000CE000000D00007B
-:1044D000000D2000000D4000000D6000000D800068
-:1044E000000DA000000DC000000DE000000E000057
-:1044F000000E2000000E4000000E6000000E800044
-:10450000000EA000000EC000000EE000000F000032
-:10451000000F2000000F4000000F6000000F80001F
-:10452000000FA000000FC000000FE000001000000E
-:1045300000102000001040000010600000108000FB
-:104540000010A0000010C0000010E00000110000EA
-:1045500000112000001140000011600000118000D7
-:104560000011A0000011C0000011E00000120000C6
-:1045700000122000001240000012600000128000B3
-:104580000012A0000012C0000012E00000130000A2
-:10459000001320000013400000136000001380008F
-:1045A0000013A0000013C0000013E000001400007E
-:1045B000001420000014400000146000001480006B
-:1045C0000014A0000014C0000014E000001500005A
-:1045D0000015200000154000001560000015800047
-:1045E0000015A0000015C0000015E0000016000036
-:1045F0000016200000164000001660000016800023
-:104600000016A0000016C0000016E0000017000011
-:1046100000172000001740000017600000178000FE
-:104620000017A0000017C0000017E00000180000ED
-:1046300000182000001840000018600000188000DA
-:104640000018A0000018C0000018E00000190000C9
-:1046500000192000001940000019600000198000B6
-:104660000019A0000019C0000019E000001A0000A5
-:10467000001A2000001A4000001A6000001A800092
-:10468000001AA000001AC000001AE000001B000081
-:10469000001B2000001B4000001B6000001B80006E
-:1046A000001BA000001BC000001BE000001C00005D
-:1046B000001C2000001C4000001C6000001C80004A
-:1046C000001CA000001CC000001CE000001D000039
-:1046D000001D2000001D4000001D6000001D800026
-:1046E000001DA000001DC000001DE000001E000015
-:1046F000001E2000001E4000001E6000001E800002
-:10470000001EA000001EC000001EE000001F0000F0
-:10471000001F2000001F4000001F6000001F8000DD
-:10472000001FA000001FC000001FE00000200000CC
-:1047300000202000002040000020600000208000B9
-:104740000020A0000020C0000020E00000210000A8
-:104750000021200000214000002160000021800095
-:104760000021A0000021C0000021E0000022000084
-:104770000022200000224000002260000022800071
-:104780000022A0000022C0000022E0000023000060
-:10479000002320000023400000236000002380004D
-:1047A0000023A0000023C0000023E000002400003C
-:1047B0000024200000244000002460000024800029
-:1047C0000024A0000024C0000024E0000025000018
-:1047D0000025200000254000002560000025800005
-:1047E0000025A0000025C0000025E00000260000F4
-:1047F00000262000002640000026600000268000E1
-:104800000026A0000026C0000026E00000270000CF
-:1048100000272000002740000027600000278000BC
-:104820000027A0000027C0000027E00000280000AB
-:104830000028200000284000002860000028800098
-:104840000028A0000028C0000028E0000029000087
-:104850000029200000294000002960000029800074
-:104860000029A0000029C0000029E000002A000063
-:10487000002A2000002A4000002A6000002A800050
-:10488000002AA000002AC000002AE000002B00003F
-:10489000002B2000002B4000002B6000002B80002C
-:1048A000002BA000002BC000002BE000002C00001B
-:1048B000002C2000002C4000002C6000002C800008
-:1048C000002CA000002CC000002CE000002D0000F7
-:1048D000002D2000002D4000002D6000002D8000E4
-:1048E000002DA000002DC000002DE000002E0000D3
-:1048F000002E2000002E4000002E6000002E8000C0
-:10490000002EA000002EC000002EE000002F0000AE
-:10491000002F2000002F4000002F6000002F80009B
-:10492000002FA000002FC000002FE000003000008A
-:104930000030200000304000003060000030800077
-:104940000030A0000030C0000030E0000031000066
-:104950000031200000314000003160000031800053
-:104960000031A0000031C0000031E0000032000042
-:10497000003220000032400000326000003280002F
-:104980000032A0000032C0000032E000003300001E
-:10499000003320000033400000336000003380000B
-:1049A0000033A0000033C0000033E00000340000FA
-:1049B00000342000003440000034600000348000E7
-:1049C0000034A0000034C0000034E00000350000D6
-:1049D00000352000003540000035600000358000C3
-:1049E0000035A0000035C0000035E00000360000B2
-:1049F000003620000036400000366000003680009F
-:104A00000036A0000036C0000036E000003700008D
-:104A1000003720000037400000376000003780007A
-:104A20000037A0000037C0000037E0000038000069
-:104A30000038200000384000003860000038800056
-:104A40000038A0000038C0000038E0000039000045
-:104A50000039200000394000003960000039800032
-:104A60000039A0000039C0000039E000003A000021
-:104A7000003A2000003A4000003A6000003A80000E
-:104A8000003AA000003AC000003AE000003B0000FD
-:104A9000003B2000003B4000003B6000003B8000EA
-:104AA000003BA000003BC000003BE000003C0000D9
-:104AB000003C2000003C4000003C6000003C8000C6
-:104AC000003CA000003CC000003CE000003D0000B5
-:104AD000003D2000003D4000003D6000003D8000A2
-:104AE000003DA000003DC000003DE000003E000091
-:104AF000003E2000003E4000003E6000003E80007E
-:104B0000003EA000003EC000003EE000003F00006C
-:104B1000003F2000003F4000003F6000003F800059
-:104B2000003FA000003FC000003FE000003FE00168
-:104B300000000000000001FF0000020000007FF8FC
-:104B400000007FF800000CDF0000150000000001ED
-:104B50000000000100000001FFFFFFFFFFFFFFFF5B
-:104B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
-:104B7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
-:104B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
-:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
-:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
-:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
-:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
-:104BD000FFFFFFFFFFFFFFFFFFFFFFFF00000000E1
-:104BE000FFFFFFFF00000000FFFFFFFFFFFFFFFFD1
-:104BF00000000000FFFFFFFF00000000FFFFFFFFBD
-:104C0000FFFFFFFF00000000FFFFFFFF00000000AC
-:104C1000FFFFFFFF0000000300BEBC20FFFFFFFFFF
-:104C200000000000FFFFFFFF00000000FFFFFFFF8C
-:104C30000000000300BEBC20FFFFFFFF00000000DB
-:104C4000FFFFFFFF00000000FFFFFFFF0000000369
-:104C500000BEBC20FFFFFFFF00000000FFFFFFFFC2
-:104C600000000000FFFFFFFF0000000300BEBC20AB
-:104C7000FFFFFFFF00000000FFFFFFFF000000003C
-:104C8000FFFFFFFF0000000300BEBC20FFFFFFFF8F
-:104C900000000000FFFFFFFF00000000FFFFFFFF1C
-:104CA0000000000300BEBC2000002000000040C047
-:104CB00000006180000082400000A3000000C3C02B
-:104CC0000000E4800001054000012600000146C00C
-:104CD00000016780000188400001A9000001C9C0EF
-:104CE0000001EA8000020B4000022C0000024CC0D0
-:104CF00000026D8000028E400002AF000002CFC0B3
-:104D00000002F0800003114000033200000352C093
-:104D100000037380000394400003B5000003D5C076
-:104D20000003F6800004174000043800000458C057
-:104D30000004798000049A40000080000001038094
-:104D40000001870000020A8000028E00000311802B
-:104D5000000395000004188000049C0000051F80DB
-:104D60000005A300000626800006AA0000072D808B
-:104D70000007B100000834800008B80000093B803B
-:104D80000009BF00000A4280000AC600000B4980EB
-:104D9000000BCD00000C5080000CD400000D57809B
-:104DA000000DDB0000007FF800007FF80000193CD8
-:104DB000000015000000190000000028001000008D
-:104DC0000000000000000000FFFFFFFF40000000A7
-:104DD00040000000400000004000000040000000D3
-:104DE00040000000400000004000000040000000C3
-:104DF00040000000400000004000000040000000B3
-:104E000040000000400000004000000040000000A2
-:104E10004000000040000000400000004000000092
-:104E20004000000040000000400000004000000082
-:104E30004000000040000000400000004000000072
-:104E400040000000400000004000000000007FF82B
-:104E500000007FF8000005C700001500FFFFFFFFFE
-:104E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
-:104E7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
-:104E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
-:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
-:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
-:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
-:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
-:104ED000FFFFFFFFFFFFFFFFFFFFFFFF400000009E
-:104EE00040000000400000004000000040000000C2
-:104EF00040000000400000004000000040000000B2
-:104F000040000000400000004000000040000000A1
-:104F10004000000040000000400000004000000091
-:104F20004000000040000000400000004000000081
-:104F30004000000040000000400000004000000071
-:104F40004000000040000000400000004000000061
-:104F50004000000040000000400000000000100081
-:104F6000000020800000310000004180000052005D
-:104F70000000628000007300000083800000940045
-:104F80000000A4800000B5000000C5800000D6002D
-:104F90000000E6800000F700000107800001180013
-:104FA00000012880000139000001498000015A00F9
-:104FB00000016A8000017B0000018B8000019C00E1
-:104FC0000001AC800001BD000001CD800001DE00C9
-:104FD0000001EE800001FF0000007FF800007FF874
-:104FE0000000112E0000350010000000000028AD68
-:104FF000000000000001000100150005CCCCCCC56C
-:10500000FFFFFFFFFFFFFFFF7058103C0000000094
-:105010000000000000000001CCCC0201CCCCCCCCC4
-:10502000CCCC0201CCCCCCCCCCCC0201CCCCCCCCEA
-:10503000CCCC0201CCCCCCCCCCCC0201CCCCCCCCDA
-:10504000CCCC0201CCCCCCCCCCCC0201CCCCCCCCCA
-:10505000CCCC0201CCCCCCCC00000000FFFFFFFF89
-:105060004000000040000000400000004000000040
-:105070004000000040000000400000004000000030
-:105080004000000040000000400000004000000020
-:105090004000000040000000400000004000000010
-:1050A0004000000040000000400000004000000000
-:1050B00040000000400000004000000040000000F0
-:1050C00040000000400000004000000040000000E0
-:1050D00040000000400000004000000040000000D0
-:1050E000000E0232011600D6001000000000000081
-:1050F00000720236012300F30010000000000000DF
-:105100000000FFFF000000000000FFFF00000000A3
-:105110000000FFFF000000000000FFFF0000000093
-:105120000000FFFF000000000000FFFF0000000083
-:105130000000FFFF000000000000FFFF0000000073
-:105140000000FFFF000000000000FFFF0000000063
-:105150000000FFFF000000000000FFFF0000000053
-:105160000000FFFF000000000000FFFF0000000043
-:105170000000FFFF000000000000FFFF0000000033
-:105180000000FFFF000000000000FFFF0000000023
-:105190000000FFFF000000000000FFFF0000000013
-:1051A0000000FFFF000000000000FFFF0000000003
-:1051B0000000FFFF000000000000FFFF00000000F3
-:1051C0000000FFFF000000000000FFFF00000000E3
-:1051D0000000FFFF000000000000FFFF00000000D3
-:1051E0000000FFFF000000000000FFFF00000000C3
-:1051F0000000FFFF000000000000FFFF00000000B3
-:105200000000FFFF000000000000FFFF00000000A2
-:105210000000FFFF000000000000FFFF0000000092
-:105220000000FFFF000000000000FFFF0000000082
-:105230000000FFFF000000000000FFFF0000000072
-:105240000000FFFF000000000000FFFF0000000062
-:105250000000FFFF000000000000FFFF0000000052
-:105260000000FFFF000000000000FFFF0000000042
-:105270000000FFFF000000000000FFFF0000000032
-:105280000000FFFF000000000000FFFF0000000022
-:105290000000FFFF000000000000FFFF0000000012
-:1052A0000000FFFF000000000000FFFF0000000002
-:1052B0000000FFFF000000000000FFFF00000000F2
-:1052C0000000FFFF000000000000FFFF00000000E2
-:1052D0000000FFFF000000000000FFFF00000000D2
-:1052E0000000FFFF000000000000FFFF00000000C2
-:1052F0000000FFFF000000000000FFFF00000000B2
-:10530000FFFFFFF3318FFFFF0C30C30CC30C30C322
-:10531000CF3CF300F3CF3CF30000CF3CCDCDCDCD5F
-:10532000FFFFFFF130EFFFFF0C30C30CC30C30C3A5
-:10533000CF3CF300F3CF3CF30001CF3CCDCDCDCD3E
-:10534000FFFFFFF6305FFFFF0C30C30CC30C30C310
-:10535000CF3CF300F3CF3CF30002CF3CCDCDCDCD1D
-:10536000FFFFF4061CBFFFFF0C30C305C30C30C3A6
-:10537000CF300014F3CF3CF30004CF3CCDCDCDCDE6
-:10538000FFFFFFF2304FFFFF0C30C30CC30C30C3E4
-:10539000CF3CF300F3CF3CF30008CF3CCDCDCDCDD7
-:1053A000FFFFFFFA302FFFFF0C30C30CC30C30C3DC
-:1053B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAF
-:1053C000FFFFFFF731EFFFFF0C30C30CC30C30C3FE
-:1053D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7F
-:1053E000FFFFFFF5302FFFFF0C30C30CC30C30C3A1
-:1053F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3F
-:10540000FFFFFFF3310FFFFF0C30C30CC30C30C3A1
-:10541000CF3CF300F3CF3CF30000CF3CCDCDCDCD5E
-:10542000FFFFFFF1310FFFFF0C30C30CC30C30C383
-:10543000CF3CF300F3CF3CF30001CF3CCDCDCDCD3D
-:10544000FFFFFFF6305FFFFF0C30C30CC30C30C30F
-:10545000CF3CF300F3CF3CF30002CF3CCDCDCDCD1C
-:10546000FFFFF4061CBFFFFF0C30C305C30C30C3A5
-:10547000CF300014F3CF3CF30004CF3CCDCDCDCDE5
-:10548000FFFFFFF2304FFFFF0C30C30CC30C30C3E3
-:10549000CF3CF300F3CF3CF30008CF3CCDCDCDCDD6
-:1054A000FFFFFFFA302FFFFF0C30C30CC30C30C3DB
-:1054B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAE
-:1054C000FFFFFFF730EFFFFF0C30C30CC30C30C3FE
-:1054D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7E
-:1054E000FFFFFFF5304FFFFF0C30C30CC30C30C380
-:1054F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3E
-:10550000FFFFFFF331EFFFFF0C30C30CC30C30C3C0
-:10551000CF3CF300F3CF3CF30000CF3CCDCDCDCD5D
-:10552000FFFFFFF1310FFFFF0C30C30CC30C30C382
-:10553000CF3CF300F3CF3CF30001CF3CCDCDCDCD3C
-:10554000FFFFFFF6305FFFFF0C30C30CC30C30C30E
-:10555000CF3CF300F3CF3CF30002CF3CCDCDCDCD1B
-:10556000FFFFF4061CBFFFFF0C30C305C30C30C3A4
-:10557000CF300014F3CF3CF30004CF3CCDCDCDCDE4
-:10558000FFFFFFF2304FFFFF0C30C30CC30C30C3E2
-:10559000CF3CF300F3CF3CF30008CF3CCDCDCDCDD5
-:1055A000FFFFFFFA302FFFFF0C30C30CC30C30C3DA
-:1055B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAD
-:1055C000FFFFFF97056FFFFF0C30C30CC30C30C308
-:1055D000CF3CC000F3CF3CF30020CF3CCDCDCDCDB0
-:1055E000FFFFFFF5310FFFFF0C30C30CC30C30C3BE
-:1055F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3D
-:10560000FFFFFFF3320FFFFF0C30C30CC30C30C39E
-:10561000CF3CF300F3CF3CF30000CF3CCDCDCDCD5C
-:10562000FFFFFFF1310FFFFF0C30C30CC30C30C381
-:10563000CF3CF300F3CF3CF30001CF3CCDCDCDCD3B
-:10564000FFFFFFF6305FFFFF0C30C30CC30C30C30D
-:10565000CF3CF300F3CF3CF30002CF3CCDCDCDCD1A
-:10566000FFFFF4061CBFFFFF0C30C305C30C30C3A3
-:10567000CF300014F3CF3CF30004CF3CCDCDCDCDE3
-:10568000FFFFFFF2304FFFFF0C30C30CC30C30C3E1
-:10569000CF3CF300F3CF3CF30008CF3CCDCDCDCDD4
-:1056A000FFFFFF8A042FFFFF0C30C30CC30C30C375
-:1056B000CF3CC000F3CF3CF30010CF3CCDCDCDCDDF
-:1056C000FFFFFF9705CFFFFF0C30C30CC30C30C3A7
-:1056D000CF3CC000F3CF3CF30020CF3CCDCDCDCDAF
-:1056E000FFFFFFF5310FFFFF0C30C30CC30C30C3BD
-:1056F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3C
-:10570000FFFFFFF3316FFFFF0C30C30CC30C30C33E
-:10571000CF3CF300F3CF3CF30000CF3CCDCDCDCD5B
-:10572000FFFFFFF1302FFFFF0C30C30CC30C30C361
-:10573000CF3CF300F3CF3CF30001CF3CCDCDCDCD3A
-:10574000FFFFFFF6305FFFFF0C30C30CC30C30C30C
-:10575000CF3CF300F3CF3CF30002CF3CCDCDCDCD19
-:10576000FFFFFFF630BFFFFF0C30C30CC30C30C38C
-:10577000CF3CF314F3CF3CF30004CF3CCDCDCDCDE3
-:10578000FFFFFFF2304FFFFF0C30C30CC30C30C3E0
-:10579000CF3CF300F3CF3CF30008CF3CCDCDCDCDD3
-:1057A000FFFFFFFA302FFFFF0C30C30CC30C30C3D8
-:1057B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAB
-:1057C000FFFFFFF731CFFFFF0C30C30CC30C30C31A
-:1057D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7B
-:1057E000FFFFFFF0307FFFFF0C30C30CC30C30C352
-:1057F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3B
-:10580000FFFFFFFF30CFFFFF0C30C30CC30C30C3D2
-:10581000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8E
-:10582000FFFFFFFF30CFFFFF0C30C30CC30C30C3B2
-:10583000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6D
-:10584000FFFFFFFF30CFFFFF0C30C30CC30C30C392
-:10585000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4C
-:10586000FFFFFFFF30CFFFFF0C30C30CC30C30C372
-:10587000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2A
-:10588000FFFFFFFF30CFFFFF0C30C30CC30C30C352
-:10589000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD06
-:1058A000FFFFFFFF30CFFFFF0C30C30CC30C30C332
-:1058B000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDE
-:1058C000FFFFFFFF30CFFFFF0C30C30CC30C30C312
-:1058D000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAE
-:1058E000FFFFFFFF30CFFFFF0C30C30CC30C30C3F2
-:1058F000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6E
-:10590000FFFFFFFF30CFFFFF0C30C30CC30C30C3D1
-:10591000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8D
-:10592000FFFFFFFF30CFFFFF0C30C30CC30C30C3B1
-:10593000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6C
-:10594000FFFFFFFF30CFFFFF0C30C30CC30C30C391
-:10595000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4B
-:10596000FFFFFFFF30CFFFFF0C30C30CC30C30C371
-:10597000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD29
-:10598000FFFFFFFF30CFFFFF0C30C30CC30C30C351
-:10599000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD05
-:1059A000FFFFFFFF30CFFFFF0C30C30CC30C30C331
-:1059B000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDD
-:1059C000FFFFFFFF30CFFFFF0C30C30CC30C30C311
-:1059D000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAD
-:1059E000FFFFFFFF30CFFFFF0C30C30CC30C30C3F1
-:1059F000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6D
-:105A0000FFFFFFFF30CFFFFF0C30C30CC30C30C3D0
-:105A1000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8C
-:105A2000FFFFFFFF30CFFFFF0C30C30CC30C30C3B0
-:105A3000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6B
-:105A4000FFFFFFFF30CFFFFF0C30C30CC30C30C390
-:105A5000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4A
-:105A6000FFFFFFFF30CFFFFF0C30C30CC30C30C370
-:105A7000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD28
-:105A8000FFFFFFFF30CFFFFF0C30C30CC30C30C350
-:105A9000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD04
-:105AA000FFFFFFFF30CFFFFF0C30C30CC30C30C330
-:105AB000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDC
-:105AC000FFFFFFFF30CFFFFF0C30C30CC30C30C310
-:105AD000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAC
-:105AE000FFFFFFFF30CFFFFF0C30C30CC30C30C3F0
-:105AF000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6C
-:105B0000000C0000000700C000028130000B81582B
-:105B10000002021000010230000F024000010330B9
-:105B2000000800000008008000028100000B8128AE
-:105B3000000201E0000102000007021000020280E2
-:105B4000000F0000000800F000028170000B819837
-:105B50000002025000010270000B8280000803382E
-:105B6000001000000008010000028180000B81A8E5
-:105B70000002026000018280000E8298000803800B
-:105B8000000B0000000100B0000280C0000580E8AA
-:105B90000002014000010160000E0170000382500C
-:105BA000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC35
-:105BB00000002000CCCCCCCCCCCCCCCCCCCCCCCC35
-:105BC000CCCCCCCC00002000CCCCCCCCCCCCCCCC25
-:105BD000CCCCCCCCCCCCCCCC040020000000000041
-:105BE0001F8B080000000000000BFB51CFC0F0032A
-:105BF0008A59051918F484117C7A607E4ECAF43BE8
-:105C0000F232303803B12B103700F1616E06862373
-:105C1000DCC4EB3F2B8F6007CA3230D402F17E69BF
-:105C200006062B3984B8A10203C312203F0D2AF6C1
-:105C30001A4817CA53E6EEC182555431C51495115E
-:105C40006C552CF2C8580D4DBE411995AF4E40FF12
-:105C500040E3641D54FE042D08FD5E1B42A7A0C94D
-:105C60004F84CABB42FD95AA83DD5C3722FD9DC6E9
-:105C700082CA4F40E3B730A2F2CD38D0DC0F550FC7
-:105C80000000174B67C80300000000000000000080
-:105C90001F8B080000000000000BED7D0D7854D52F
-:105CA000B5E83E3F73E6CCE4CCE4242461C2EF24A3
-:105CB000841034E21022064BEB097F869A7A07AAF9
-:105CC000985AC5012306082452F5E1D37E9948026B
-:105CD000011106B53414D4E14F692FB6918B965A51
-:105CE0008A033E2DB6BEEF059FB57AB57DD152FC35
-:105CF000294ACABB52FBAEAD6FAFB5F74ECE39CC19
-:105D000090E04FDBFBDEA59FDDD9E7EC9FB5D7DF49
-:105D10005E6BEDB5CF78483E29B89C904FE01F2DC3
-:105D2000FF9741087DD4577A7412CFBA98909C3C63
-:105D30002BDE534EC8D03C2B452AE973530B7BA571
-:105D4000FE7EA23C9C332B04EDDAF2AD10A163B4CD
-:105D5000E5CC2331182BD640480121AA4EF09F688C
-:105D6000EF31E7EAA41C1FFDF513F15E21A4DD2C41
-:105D7000CE867EEEF10949127289BD2E1322C6A489
-:105D8000FD7C02DE12FA208F107F959CBCA288C297
-:105D90005D924C41DD0833B80F17BD523386AE63B8
-:105DA0005DB51CF186A1F7AD844C2664058C45EBEE
-:105DB000EB2676D78CC983F76A04DECE54F6B66A32
-:105DC000B4BD5142B07D70623CA5613FCB28A4FDBB
-:105DD00072180824A76C512D091262CED0FAE1C2C4
-:105DE000FFB770FD066FA79738DF1B64FD1F95098D
-:105DF00050EB25D18BE8F8535DEFCB66BD0DE31A70
-:105E0000843E2FE3CFE9BAEE873F0A09F91209E48D
-:105E10009DC8A27F5F4A2E053C909A5C42A69C8D4D
-:105E2000BF7EBCC591BE8430BA68A4EF1FD241E7E3
-:105E300074B862464FA744D7ED8BC8C44B1FCD52F0
-:105E40005ED48B012F4715C4C3BA3A86E77533E495
-:105E5000645CC275D616D2FEA309C363CEF862890C
-:105E60001413B2B185D6C79D8DE7EC928405F4F783
-:105E7000951009F82A9B3E1B42D7953D35857C330A
-:105E8000BA8AE193DCCDF011A7FFFBA4B81F9FD91C
-:105E9000029F1127BEB2393E736A6CF882E755142F
-:105EA0008F13E0BD138F49F883E2AB5EE0319F8C26
-:105EB000453CC67311BF03E1F10A8A832C0ABFFF78
-:105EC000556FD25BD48F57C11702AF26C7EB8699A7
-:105ED000BD3A30C3468BF1392129490EE178925CF5
-:105EE00085EBC3B203F0E6C5FEF85EA7301B7C9ECF
-:105EF000309DC75F9640FCEB141D4324E053435292
-:105F000081AF814FD3CCBB4E4FEA126DBF69AA4C13
-:105F1000805EEB2C998469FD74999A5400EEB8D593
-:105F20001DB2F1A901F8A7F8BA8FE3471B213BF096
-:105F3000A9E6F95D7CEE5CC7A6BEF5597C5D6C1DDB
-:105F4000A43BD901709C99299375D2C0E30E842794
-:105F500031EE80F0F598BE1298F70525B28EF2DA90
-:105F6000BA70B243A6F8DA3883E1E36CFA7EC6F978
-:105F70007A7BF5924ADB7C915EDD2CFF02E62139CB
-:105F8000CE7555993E33ADFE3CBF7988B960743407
-:105F900090991E9F1BFC610ABF0D4F7AD894607CBC
-:105FA0007DFC3D3AA8784276E8A017DDF39C05AF6A
-:105FB0006B5EF73C6A49B3A562CDA987343341D8FB
-:105FC0003C16DBA7087BAE821EA1FAC71F71EA113F
-:105FD000B7FED64638EB6A15D3D72AB13D2F02ED6E
-:105FE0004EF5CB85A45F4F570E4EBF10AB01E17548
-:105FF000EB93315CAEA7EFEDA95329FD4BB6093DFC
-:106000007DF72FCA687D37E8695ADFDD0973D1B2A1
-:10601000CBA9A727F0C1CABFF3920C7A7A47063DF5
-:106020005D9CB0A6819E2E49D08D808E53BC9EE98A
-:10603000E9E28E6619E83481EB097280E149A7FF35
-:10604000B3EBE9623ECF986D4E3C15733D5DBEDF0C
-:10605000F59CEBE962979EDE087F507C154A1C8F09
-:10606000634929E271EA20F73B8E47F77E570C73AC
-:106070008FA1787C90ED7739790C8FED1D3201FD81
-:10608000707A9B8CFA715C51548676424F72D0487C
-:10609000195FFF4EAEAF059C636698D5A04C4B8848
-:1060A000590DF4D1D693482A0C7ABA310EF36C4AC2
-:1060B000303D5D922072CC6607691C9E4DA1DCD9F3
-:1060C00020D7A7136A0496B98B8465BDA81FAF7D3E
-:1060D0007607C7E3D7A095431E9C74CCE17875E39F
-:1060E000675CD2C9DF250FBAE8B1DE59CF71D1E5BF
-:1060F0004AC9657F0C921E5E95C4BDB9504FA25D22
-:10610000A7D3B5E6D3BAF22FCF5AC0D746277BA67E
-:1061100075C8C922CAB7813656F774A8C96A5ABF6A
-:10612000218FF1F5D83849825DA784A204ECCFB164
-:1061300079547FD8F0E9E1F81474833F011F63B804
-:106140007D913D33D707FCBD298FE37B06C33755CF
-:10615000803ED07F02DF1E8E6FA3B21BC023B3C36D
-:106160004E7C4F3AEAD437D7D60D71D4AF890E3F63
-:10617000277D3C9C8E1E4E27C14767E13FEEB20F44
-:106180002B9D758F8B3E2D924BEF0C923EDA115268
-:10619000067C3B4EF64776149DDD2E21C948373AE2
-:1061A00079F2389D7F0135E3B2E9F8CB48CF28403A
-:1061B000D001238CE32C977B0AA07E8AF46E1E39D3
-:1061C000A67FFC512A392051234EA2E85D49411A8D
-:1061D000A693545610C18EEA05B874C48B44FFBB15
-:1061E0001EF94495015FC34DF69CC4B355A887883A
-:1061F000F817463A79F99F852B9FFFB344F128F1B0
-:1062000052013A8E01FCC4506FEA2481753FE9C205
-:10621000D220DD5806A9A686D224A604652E896060
-:10622000492E483E9142FD79B789FCEEFB1DF924C9
-:10623000AB7F3DF7C29F14AFC348F47109FC273A06
-:106240009EAEF4F3A18FF321B5D3906F7593F1ADAA
-:106250005E42F7D372947BF45FDC785ECBF5F28616
-:10626000161DCBF52D262E7268281997297D7CB531
-:106270004C8FE4847A3AC06FF137AB912B68DD6FB5
-:10628000F4BE7A13D87BB76B917B68FDF0CCE74303
-:1062900050EFB8DD60F6611BB353FD1C7B1D637BC3
-:1062A0007B5651B836DCAE47F823873EDA30BEF76E
-:1062B0009D9DA0B76EF34700BF9B4247C2AB405EB7
-:1062C0009A3594176A7B22FDD657FCA208EDB58F4C
-:1062D00029FC943E2842B4BFFE116D3589B61BD10E
-:1062E000DB82767D7377B59287EFE38170FF7A3B2F
-:1062F0008A87E1FEDF71642D09D3973995710BF020
-:10630000E52BA3A62CE5435FA529C50D90CAD8EBC4
-:1063100012E53FFF8C18B128FE0221B3157845E73E
-:1063200074236A2204F2EBC667C7C87868219D37D8
-:106330003E5E8BEC46B632A57969DAF5E17FE61D63
-:10634000D75969ECA96C5942FE3F327E11FABD5E05
-:10635000120B65814E2AD3C86E0AE7BAF18B46C785
-:10636000D2D87B3639E3F64AFA32533F4D21CD5D20
-:106370003678C6CA32F29F24EB4C6E43948FA85CE9
-:10638000E5988C9FB419C44AA681E3720EBFAEC6CD
-:106390008989F6B529819DF545E1EB5D89C1B9563D
-:1063A00022755D69DE6F0778F2413EEE4EC1FE98C0
-:1063B0003D93F135FDCFEAA2F0E7A8AC14ED6B38C0
-:1063C000FC7B78BFF3D043050F027F940FCEFEF223
-:1063D000C2BC69E09DF829E6DD48E79565139F0B8F
-:1063E000BCBBE9294A49F6E1FACE8CDF1C02FB343A
-:1063F000139CE1DB50B79370332D87D2B29697266A
-:106400002BDDF39DEF785F96D93ADCE3925DCC9E6D
-:10641000F2F3FDEBF094572C85D26D749CF0B88AA2
-:10642000537F8C2E93D15FDDB4876EF845A03F5823
-:10643000FD915D24A950549EBEFB1E19E01A49ED42
-:106440007C683F84C464C05B11094B500A3DB88628
-:10645000EBC10F49F43A391FF47417DA45B595B713
-:106460004E4B1737AAE7F2713EFBD45768B9408FFD
-:106470002E82F18DC8318BEEE4447B31BD5CD1EDD1
-:106480002A34D7260F44117CC1E4A99DF33BC8CD23
-:106490001C5A9F777D7A3837CDD48631BBC52C44C2
-:1064A0007F47350BE7DAE471532B952BFA3E09E36E
-:1064B000D9E4E0BB7C7DAD5C1ECE871F6B6869466E
-:1064C0002C4BA1AF6A92891940B7ABA5D86A998EB7
-:1064D00053D11C7956A575634FB7E567CFD7C2F383
-:1064E0007925CDEDC01286D54D40DF3E72F70A0BFF
-:1064F000E8787A045D7A1A3B4194AA253BEC147D36
-:1065000084DF690F0D521E2F8824A601BC65E1634C
-:10651000D5B961A0536C1BD069C4D1C86158A251D0
-:10652000772C956FA357D8646523004DE1D7E2948B
-:106530006E488F6808E8B198447742FF406594C57B
-:106540002B07094726FE0F8798DE0A737E6F8F5050
-:106550007E97FAE5C1CFE5A19DBF3F5D49D0BF68F9
-:10656000CFAB30D3ED1782DF05FF0B7DE86E77F8F8
-:1065700053F0F9785A961213FD9A0F49EC39C0037B
-:106580005D3DCA9F16EA42FF4EC8556DE4D88C2186
-:106590001047AD0C5728B6FDFA7DCE770B74EB97FC
-:1065A000D07FDEF50BDAF3291EC6DD4D22A066AFE3
-:1065B000BD7E01B1F3FBAFFBDA475F42F9BABB1B0B
-:1065C000DDD281FA75F3F55D2D455FB3F3211DE74B
-:1065D000751CA7A43B2EDBF44E0EC7B332B38F3F1E
-:1065E0004D10CD9ADB122AD0A7A236A248B6755C10
-:1065F0005BE7B4E729BFBF03E3BAF9741E69F690FD
-:10660000F3D83F4649B15E80B7B6A4BB0DE0D34294
-:1066100051F4F728DCA7E1F91700F727E782FB1D03
-:10662000887580DE8C545B43C2089FAA5C027E544E
-:10663000AA2D3F0C783FA602DE299E35C586E7C10C
-:10664000CAF9FD7CBF1848DEDBE00FB49763790A16
-:106650006D3F4467724A7A8E11E67739E397C26ECE
-:106660000E8608C659736A7B08F86B171F55D0DE73
-:106670001D5A4B24B0C3845D3BC475DEB001EC668B
-:106680002A3FF7B58450882E367A8FC239C08642A9
-:1066900099D9C753CE0C83FE3FAAEE09813F6856B5
-:1066A0009D59775318ECED30B65FDB12E1FB4F15C7
-:1066B0009689DAB7F6ECA4F36F08F9D15EBEB7A5F8
-:1066C0004CC46B11EE2122DE5BCBEC7B11171670F4
-:1066D000D1FE3A0FB63ADA93900D6FC5B6FE61A6B9
-:1066E0006F06EA9F55E9C47B5F7F6B70FD21DE6F0B
-:1066F000EF5F6DF51C85F89CC9E3FE42EF05791B41
-:10670000B34A46FF59E0D95BE68CCB25F8FC99F8F3
-:10671000C53D1F09FB1DEB27F106846F05978B4CC8
-:10672000E3B473FD28EA1E92DE6E5BA6F07D929FB5
-:106730004B997CAE1F594E7C5C2CE87790E3CF647C
-:10674000F22EFC1A8C0728F6F9D83AB08E719A38D6
-:10675000D3C72EF8457F8DF7CF0487E61EEF381D8F
-:1067600067B26D1C179C99E0739F9391779CE364CB
-:10677000D65FAE7E27074787B3FA119BDC633DD710
-:10678000551FE66A5FEC7A7F81EB7D85AB7E99AB26
-:10679000FD3457FDABAEF6735DF5EB5CED17BADE7D
-:1067A0002F71BD5FE1AAFF5767FBF2C59F0EBFFFC8
-:1067B0009FE149C8D5D978493ACE79DD72554C5216
-:1067C000A352B4DC91F3E22278D5A348EA099847B2
-:1067D000C4B7486A82DD8FFDBD11FB1DEC633B3EF3
-:1067E000B6FC512A57BB122F05617F13CF4F4A6F5A
-:1067F00004C787A97DA8A596B3785002E5C64FD4F3
-:10680000B77ACA804A12C6D174A31E51AE97D0E798
-:10681000367DE52551A4B336C2F99C24981C9640D8
-:10682000808A8E17DFA4A1BD171F499263419EF392
-:10683000D8F8D8BEB81FDE492AD34FA168A21A647F
-:1068400078585DD76128DD780A4D8F4F7C9EEA65C8
-:10685000F200F3CB77CD74FAD5D7F171E6ABE7ED63
-:10686000A7BE3249E91F7FD7B78D482B6DB20B8089
-:10687000A0F5F8B7F524C4374641BC8E1D2260BC94
-:106880006E24E1FF785C6E04FC4DFB8D348E62FC5F
-:106890002DDC601E019DF775B514E17A44EA1D0FE9
-:1068A000F3C9592727B2F3BDBF7E82F1788EAFD0EE
-:1068B000BD937BE2104FD9A845C6229E238867EA84
-:1068C0008FB7792B804D187E57C1EECB9EAB815C84
-:1068D0003877E1F400FD4B4B1FF013EC8B2485F56A
-:1068E00000E9C17A36B773CBD4225C7F0EF7330947
-:1068F0008948607F84AE4CEF9747A5EA32F592FE57
-:10690000B8A51466F14969FDF37F9620AE5546C2DD
-:10691000CC7EE171C2B58AF409C45FCDC1D98BA127
-:106920006F3AE94AD46632C7E65F5EAF0A3F8FE14D
-:106930006B4C88AD3FB4516B06BF66D76C271F8880
-:10694000F6EAF9F3C1E60963BE383EC855C764E00C
-:1069500083EB4D88574B718AB7ACC1E3CD54AC6F14
-:10696000AAB84E82E3FE40B26EB0D75562DDA8E60B
-:10697000F7D77FAD4417C2FBF83452D66CF48F437F
-:106980009FDF0CEDD23C6F48D77E1C8FDBD2FD1908
-:10699000F7F152AE03866E3365B0278B3A57F8EDA8
-:1069A000792EA57CBF7EAC739F0FD6BBB5F1DCF60C
-:1069B000D17D2DC8FC19DB05A5EE28D0835CA29201
-:1069C000DD69CEB17FCAF9BBAFBDCB3E9CD116AF5E
-:1069D00086FEB97532817834DDE7D1BE2BE27EEDDB
-:1069E000E6A97149A372F8C0168276726EDB429FE7
-:1069F0007D3D857C3D9B6B0BFC60B76CAF5FF855B4
-:106A0000F413A8FDAFA0DF1B5B07E317D6B0F37E3E
-:106A1000377CF7F2F525EA199EDCEFB334124B27E9
-:106A2000873F55F9F9834ADDC782FE73947B0FDFF8
-:106A3000F98BF174BED22A39E20BF7C339AECF6EAF
-:106A4000EA417C655DA69AEB400F776A0E7B73FB8B
-:106A5000B6FBB7D4C3B91F7D0EEAE0D12F370F8B39
-:106A600052B81EFBDAA2171603DFB7CB04F49180ED
-:106A7000C32877DABB47FAE4CC392F1DB71AF15295
-:106A80007F6EFFE9D3E2630B97F34C7CE2DE57DDC8
-:106A90007C703EFBC355CA675FDF7E90433A6E0150
-:106AA000F7FB86D685A51EA35F8E849F22E629E08C
-:106AB0007C965B7BBF0FF86C4B5D05CACFE9DA852E
-:106AC00012E8934DD0328D9E10F3658227CB93C090
-:106AD0007C892DF5F74BE9F0561863F122F7F36A3C
-:106AE0000FA3F37A352141FF4CED467BB8BEE67229
-:106AF00055C8D7159A9A8A02BE0A222AB987E2EBAC
-:106B000081DA85D5A5C077540E21BE32A386A0BDFB
-:106B10005068B1732293E2EB69BAEF6DAE2791141E
-:106B20006DB7D9D2F01CC62D876E7EDC5C7F6EFD02
-:106B3000422C5B7BCAFF1E8FC1CE734B4809D853D2
-:106B40000F0CE0BF0D16BFA17A99C54B67540CA07E
-:106B5000CF5BCF378E39EFCBC08F33069907E0D2AA
-:106B600017E4D92DB34BF3201E42F50549871FA723
-:106B70007E18081F6EFC5F0CF8BCF08BC3A7FB7D72
-:106B80009E87C70107898FF575C5FF03522633B568
-:106B900077AF47F41379615F21BD0AC8BF051C3A7E
-:106BA00006BC8A0896334814CB636A2CEAA1ED67C9
-:106BB0009166ACD79004968B5593D199E7C188F331
-:106BC0006E753AE3FB719792249C3B93A973F9612C
-:106BD000B06A9DD00986523F49E35711720F8E3734
-:106BE000DCB51F8B38C5D0C6446D051D77782DCB1D
-:106BF000FB1C5EB5CFB18F05B9FC88F1B6560D6EA2
-:106C00007F7ED4B53F3FAAF6E8409F47ABEE69854B
-:106C1000ED46CD7D2794AEFFB84E275E377CDCE590
-:106C20008BA681676BFD011FE48D6DAD4A9F17EB4D
-:106C30008623D3FB7119CE99BEE265E74C5B73F4F2
-:106C40006FB0649D958EBC04A21845F679B77E4C52
-:106C500072A2E7D4274E79D9E8E1F921011200FEAA
-:106C6000CF840F517ED178786C5AF392689AFEA542
-:106C70005E2637ED39240EE7D28FBDA632FEE37AC9
-:106C800078F237C249B017DA414950FDFB5835E375
-:106C9000CFC939FCFD4361CCAF1ADE49E21ADDCF22
-:106CA00086BF5AFF400E6D775F3DF5206DCFEFAB8D
-:106CB0007CA903CE899F7A59C6B8EE645FB71EA13E
-:106CC000F054F17D706BFD4B989F1CDFA646C6A269
-:106CD0007E97883419BD79A48780F7198FCAE85642
-:106CE00079BF2F0CFB57B8478F50FCDC3EE5253DA4
-:106CF0004CCBFB46A47458E7FAAAFB91CFF7D51703
-:106D00007FBD14D1EACC3B99A54CEDB6E87CEBEB0A
-:106D1000D9B95D4E4F4AF7429CB54E255750F8827F
-:106D2000065BEF7DED24798F047030FA4A640EFA29
-:106D3000C585AEBCAE0257DE9B5939EB5DC86731E5
-:106D4000E19C1F16A1343E7011E8DB2699B95BAEB9
-:106D5000FC68A3D27A17F2036629077D907FB5A558
-:106D60004D3571FF738DEB5E874962872D09C789A9
-:106D7000831FB8E541B64F9A138D483C0C5D39DC52
-:106D800026857B089DB2CD09B7C0AB7B1E77DEF5AB
-:106D9000BB829F8793B1A08744BC59C0EFE6DBBCA0
-:106DA0008AE4FE97281C5B5F3670BFDE5AF5D23747
-:106DB0009B609F2FF362DEC457CFEC69FC112D7FDF
-:106DC000F9C70325505E59B8ABB289B60BF07C0900
-:106DD00011CF2B8091D17EE57A8DF30329DFDEE69A
-:106DE000C9C347984771DF111FD2ABB04D4EFA802F
-:106DF0003E6A8A007FE55D9640BBE9BEEBBA31E9A9
-:106E00002250D725C56D721610F643634C82F3FBF2
-:106E10002BEA12B3810F0D9E47684412681FCD54B0
-:106E20005ED431CECEE966723884DCB9E9525A9F1D
-:106E3000D2212F65789B1A0170873736CB202FA57A
-:106E4000552C6FB9B4B34BE279C2984F3F8E237182
-:106E50005CB481E5156E63F817F9DFC14627DD4C98
-:106E60009EA749FD0C19FCEEA24ED7FB680DE66308
-:106E7000BAE95AACF1BCA8529E47C8F1309CDBB3CA
-:106E8000EB1BF9F99CA127CF65CFEEE3E7734761D0
-:106E9000FDE3CE7E3F2983DEBD0AF42ED5378A9CE2
-:106EA000EA40FFED3219FD37371C1B1A99BEDBA5EE
-:106EB000C90EFBFDB3CE7F03D7FB8ADCD301EBFC0D
-:106EC0005BCFDFD8B7FEBFCFFC77FD9DE75FF777DD
-:106ED000C6FF96BFF3FAF7FC8DD75F532639FCB394
-:106EE0001D909842C7FBB157C4D39C7A5B91D3FBEA
-:106EF000D96F69B2239F58E4294EAFB31668783E24
-:106F00002E137BFE8B186FA6F24607E8D32D5C9FED
-:106F1000523D4A205F207B8AC89761FAAF86EBBF5B
-:106F20001AAEFFF665D0AB15902B96877605DE0777
-:106F3000994412E8C7048FAA9867BC8FD0ED05F476
-:106F40005AD89B362FBB80C3EDD6A7055C9F56BC95
-:106F5000E87ACEF5A87B7F2FEA8B9B128C9BFE777D
-:106F60008DEF8F2EBD2AF0B0A58AD9C97973D3DBF6
-:106F700081EB5D74342A9B31FFC04D8FB734E67FBF
-:106F80000B7A2CD0ADD7B5FCCCF4EEE1F4BE9CD39B
-:106F9000FB571AF33F44BE48267A5779D93C9706E7
-:106FA0008E875A6135D16AA483C2E9A490F5DD18B1
-:106FB000F725B713BB5FB9E1636A7F507A6C358CF4
-:106FC000C83DB47E691E9145D2FDC793FBF3893D50
-:106FD000DD2C7EAAE4692E3FCB6DFFEA9837BED543
-:106FE0009293F122B023766C5D0E76C4CBFE08C47A
-:106FF0000BB6E674BE887E5C62920A70087B91F0E4
-:10700000B82C981204ED26F7B993D3DEDFFA715746
-:107010000AEC2EB348C2785F47F8FEBCB4F7F15CC7
-:1070200076BEE10D38E206E48AC1D9EBAB38BDA9E2
-:107030009F98EFB5C5295705664D62E7E6334C3892
-:10704000DF91AC5932C4D1338D0311DE13B6F3A6F0
-:10705000C5AA3512C693C06F2CEBF71B0919C1E204
-:10706000F262FD83BD3FD0B8989D7B73BCE65DD6D0
-:10707000F5B9F88FC2DF17ED0C6AAFA5BBBFE3F619
-:10708000C36B3CD614EF258387FF116038DAFE8589
-:1070900072A5265DDCA087EBD7C0D1AED973E9FA23
-:1070A0002A5FE4717D6AB6D9CFD3EECB53D3F6FF16
-:1070B0003997935FC1E548D4EBA978BE84F92404DD
-:1070C000D625E4D13DFF443EEFC4CF38FFCB5CAEC4
-:1070D0002772B9262482E73099E6ADE67A43949F79
-:1070E00076DE1EBEEE6ACDE471DF73CF3B87AF73F1
-:1070F000CE675CEF493EEF9C41AE77019F6FC16761
-:107100009CF7233EEF8241CE7B2BC7EFAD9F11CF83
-:10711000AA2EF1710687E7563E5FEB679CD7E4F332
-:10712000B60E72DE4D1CBF9B3E239E47F07937B9E9
-:10713000F09C497E777CC6F9CA74263FBBB8FCBA7E
-:10714000F59A983F502847A1FFD6101DC7A6A7AEB5
-:10715000F4B2F94549529FA0DF3A9C9FE74E597E11
-:10716000C7C27479E1A2BD7B3FCE34CF37799C464C
-:1071700094629E203F079D72199D27CDFA44FB899A
-:107180007058909F79FC251C9E25E7B90ED1BE5AF8
-:10719000637A36D3F8777238EE74C13FD0F8A2FD27
-:1071A0009C01E0EFE070749C27FCA2FD8201C6FF09
-:1071B0002E87E3BBE709BF687FEB00F87994C3F142
-:1071C000E879C22FDAB70E30FE931C8E27CF137EDC
-:1071D000D17ED300F87996C3F1EC79C22FDAEFEAC9
-:1071E0009377A7FC19E2FB06115206F7BC47117F03
-:1071F00004BF6F10E9398CDF3758A985F1FE799704
-:10720000FB5E94ED3E1515F1C37796C6A1FDC38BC9
-:10721000599EF2C31309FA110FE7B3BCFCBE7816EE
-:10722000B7071F9E28633CE9E190338FD9E0FED970
-:10723000C3111E2719C1F2988D72719F964E57C0C7
-:107240004DC430E4D3B0FB55C2DE13F7AC56A97C75
-:107250007E8B245B69FF87CB597DEB0C92948B6C02
-:10726000F7AFCA52780F080C5B88C3F6DF1FB3C8AC
-:10727000CA0A5B1EC6CA14E619A83C5F8422843879
-:10728000F2315CF7B6C4B9E135116B26A8B9A24A50
-:10729000768E571475FA0F8D70998BB6FF2DD79394
-:1072A0006665FA7B357B75169715F99A57F3F50BDA
-:1072B000BC55707A6E98F3C7EEE9749D2F4CF5605B
-:1072C000FEE80B47391EA72A49766E4E3CE9EEE3ED
-:1072D000648AB3199DCD477C143FD7BC482240C671
-:1072E000C036AB3D8C71B58F91FF30AE46E7BD66C1
-:1072F0005B4205FE9BDD199E0EF1C0AB5F0CAF82B9
-:10730000EF0A8CEB24110BD0FBF1B7709CDC36122A
-:10731000493252B59A2CDEE78CCF897BBF3C3E07C1
-:10732000616ABB7F399BAFBBA2CD6C8723BB8A1937
-:107330005E87FD3A9BFB99FF64791D7EE66C7E7F3C
-:107340007AB6CBCFECD49DF13AA3333A13E2DCCA40
-:10735000D5C72C1DE08F4A265C4BB921BA498573ED
-:10736000E4D9DB9AD9BDDA0CE75AD90FCD0DD8EDA7
-:1073700077718EFDAB6DE7B6D7459C41C41D5EE1CC
-:10738000F7F15EE679C57DF9289C3F72AF961C7CCB
-:10739000D2A9333DD2097C92FF9F7CF279F3C96F69
-:1073A0007467FCA113DE51792C8DA43F9F6FD0B57B
-:1073B000FF94D72F800E415F7A3A90C66C471EB17A
-:1073C000C8A772E36D0DC79BA8EB19EEBD8CF0F159
-:1073D0007DD6EDD7BF11AB867589380D2177B9CE33
-:1073E00035A746CE159750C4B98FFC8602EB29F31A
-:1073F00071FDA31215C777AD03E5BE00F20D390C80
-:10740000AEF1DA415F78FBD7E529895A12DE1725FC
-:1074100078CE07F9EAFBCA617F341DEBB67C6CBFFE
-:1074200059C7EF0BAD2B5393592CAFCAF9DDA2927C
-:107430001D7A3ABB4294702FD59EE7E186572B897F
-:10744000C5EDF0681C1EF7387333C2D3E0887F9D0A
-:107450002F3CDEF1847403DFAA948B917FBFE51883
-:107460004F2E4B929E7471283E0EDC55C375B9E8C1
-:1074700092697E7D8433FF49CB73DE4F518D5C571B
-:107480007E948BBFFAE242839B4F7CCF6735E783C4
-:10749000367E1FC5DDDFA72648240DDE7D61771E01
-:1074A0004612E9E00D39BF3BE0315D70BBC65F0FAE
-:1074B000CFD2E4DFB8EF57AE5593686FC5299890E7
-:1074C000E7D9CEF9523593782FEB3B3E29EDFA49B7
-:1074D00024FD7EAB96A487DF7D2F48CBCB75D221D0
-:1074E000C3FDDBB542EECD5D16F00992260CFFE739
-:1074F00096F3839173EDE759426F49BF513EA14B1B
-:10750000DAED737D2F6190F4553F1A029756FBEB2D
-:1075100054AF42BC96CA08E6F1BADB1F13F87B638E
-:1075200007C22FF474D636914FFBE9D601B906ECA9
-:107530007CDCD93FA31C723DA770BE7E6E80F567D0
-:10754000A2AFBFC49D4F3838FAFA40EE61DF532D29
-:107550007E88EE94FB4CF31193ADF77CE5FED3C22D
-:1075600039A42646409F69A11889D17DBE309490E8
-:1075700020CE6048BD71F0C7A84C8581CE1BE1527A
-:107580005DBEB3DD34DACF5324C73DD9207F91C32C
-:10759000D03E1E225DD07E7D9E5AB3A3BCBF9D21EE
-:1075A0009128F0BB91AF46E1B9182F7BAA733C6AD2
-:1075B0002628F67B58EEEF2D78A630FF54A376E808
-:1075C000F674FAC4CFECD0AC677D78AF2F1035924B
-:1075D000C092859549CCE32C6C2011F0E74A3BBB67
-:1075E000498C0EBA96C3515899C0FC80C26D093CB3
-:1075F000B7CFF39266D8970B1B13D202DB3C657EA4
-:10760000C6DFD3E6EAB84F7CAB9ADDDBEB0E2D4C40
-:1076100054C37C55ECDC2B90A79261141F8157BD9D
-:10762000CCFFACEC816F49B07C11FAFE9D16525133
-:107630003F9690F75A742C4FB698589A1FFFCF1068
-:10764000E4B7B45F32390CF90867020DA361DFF8C3
-:10765000A02584EFEFFB76240C7944CA91D7F03B48
-:1076600012FDFC1E574815E4BFF658403FDBFA7781
-:10767000F86CE7FC7DEBA2EB5D40E7B957926F84B5
-:10768000F9A0BE10F95457B4028EEF30C333D89727
-:107690009E76127DA21CBE6792946E2DB73DF75167
-:1076A000BB0DF6D74B4CA47B3F3E93AD1CDF13C103
-:1076B000DF2D7C91E3756ED539CF4DD6B7A4BA676F
-:1076C0008CEDAF1B19EEBBCDF54CBBDC4FE7990938
-:1076D00097D8299F4F9F5B3614F0F5A0C7798F5C30
-:1076E000948A392952026DE38532CA21FFDECA8AA3
-:1076F000F1E1A139B6F16772F895233F41FC669537
-:1077000027C477776A0B6D79FF23620DEC3B7ECD42
-:10771000EC7E8C38871C7D7D4F2B1C498C5EE9BC30
-:1077200037338BDFF32C6A9731EFB5680AEA505292
-:10773000D44A30BF6AA712A900FE7E88BC9C632988
-:10774000B02B1332928A6A51DC39CECE45B5CF4385
-:107750001C40DC1B5DD5C6C61B158E1C0D43FCA44E
-:107760005C467B793489E830FE68432670AF680C4C
-:10777000B18D43EB239B9DE3BAE12D0AC8F8DD02EE
-:1077800001CF28B25FB7F2707C92A4FD4750376FEB
-:10779000781AF8DCF38C11ED2EAAA8489134F392F4
-:1077A000DE5638173A6BFE01C66DF1F7E5DF05418D
-:1077B0009F6F93D8FAE32F2891DD40D75BF760BC29
-:1077C00066C48A4EDCD73BFDCCBE5B4DED01C303E6
-:1077D000760A2DC766E643C5A488CBC6FD232DFFD8
-:1077E0003DE6AFDEE88778987FDA46E043BF1ABE11
-:1077F00016E8E13FEA21708EE9B712287FA484D908
-:1078000019F796176783BCF99BB5B4FE5A9BDF83C3
-:10781000F06DF34B2AE48352DEC275A98DE1EFCE01
-:10782000A2D5FF966F3D02F3BC9F1FC3523C0F2DA4
-:10783000AC0B037F4EBFA51CE35FA73B258C7FBD30
-:107840002D253548D15E7A75F3842B283EE6E4C4B5
-:107850001E857E8D75DDCFB333DAE652F0EB6A21FB
-:10786000CF2F1FA68B337F70C45B1115EE838D5015
-:10787000539E207CCFE7C8ABAC8C5703BFEB7003A3
-:1078800086D2335862BD0B7E5380DF3F52486F5C17
-:1078900002FF682A216FD9E8063E9DBD0E67BAF641
-:1078A0007A26FC0F54D6D3BE6F8D855D3E62496843
-:1078B0001724D97710CCC8048053091D2D28B1EDA9
-:1078C000735EBE3EEFF485FC7B4916F76F22C4EE73
-:1078D000DF7AF9BA4087BF65EBEF0939EB8AF9F92E
-:1078E000AE43D8DDD2337F3901745CF5A407E39E43
-:1078F000D39FF4A42EA7F565DB25DC67E4434CAFEA
-:107900007FB04B42B94F0534D403EF9B3AD69BBCB2
-:10791000DD1BBE44EBBD4F2A6407A2A50EBF2F7529
-:1079200042ECA707587D117790966D3F3C1FC66BC0
-:1079300038E025B04F2CFBC92D577D89D66FA17C2F
-:107940000C4D96ED6ED586D1FAE2A4D405F553D34D
-:1079500008F2593C574B425ECBA96077C13506EE21
-:1079600063243C0ECEB7BB0BAEA6FCB824F9C42CE6
-:10797000E8B764AF049154BA8EDDCF1752B8967D44
-:107980005FC2FD71E99E2C12B6E1F3045DCAE5F415
-:10799000FD0ABA4ED087B790C42CA0D7B2DD9B3475
-:1079A000FB3EF75E4B19A67E88FAB2EFD37968BF2B
-:1079B000E53F9422B0C4E590EF00FBE54F7C753BBA
-:1079C0000D585FAB561A8075ADD1A0DD2DC9054F9E
-:1079D000F9C200DF766D167DBF64DB766D5139E04C
-:1079E0008DDC08FBEAD23D1792B08DAE273A15F434
-:1079F0001756E4E83BF07BA286159A9B261EF25EA2
-:107A00000B71C0B584EB0DEAF769736CED9FCACAC0
-:107A1000413E5DBA4771CC23E81F3F46D83DB49F35
-:107A200005F01E9AA09FD8AF04FD56880FE5A9BDAA
-:107A300093D3C103DFD5027812D4BF81F2FE961032
-:107A4000960FB684914E9B018FE3585E0A3CA77255
-:107A50008BDFF30B5AF0A129B88F625543FE656E98
-:107A600094D50BAE8F49E173D8E9A2DCEC892D00E7
-:107A700023676AD6F766AAD41FDBACC56E8590B5BE
-:107A8000A9EE983983EE798D59D1C959B673BFD50E
-:107A9000FC3B3217678571FDAB0B35C4F7E61B263F
-:107AA000EFE4F127DC2737DFB0E851888FD3FE5FA2
-:107AB000C902FF829FFF65EA5F30BFCAD1BF607E07
-:107AC00083E83F0BFBEBE7EEBF79FE65CEF9E72FCE
-:107AD00011FDAF42F88D73C35F70E354E7FC373696
-:107AE00062FF262FA36F6F8E8E79D66DBE48CA03B4
-:107AF0007456097E875ACD2DDD01EDC4BE432D4B52
-:107B00000BF2B68DBD3915EB889D8FA6CD073802D7
-:107B100054BAEC7C945DE577C8558E95EBA80FA917
-:107B200019E6689F1F2D76BC1F5A77818B2F0DBCDD
-:107B3000B78875000A0C730AA7364C437D543D8CF8
-:107B4000D9C1771CF261FD8ECBD8FAEE1866A01C65
-:107B500003CCE097DFA1C52EB67F2796AE4B82C33C
-:107B60009C9B8DD89DB08EFEE761199EFB79BE93DC
-:107B7000DF4B50DFAD299ABC336EC367C748CA0FCD
-:107B8000B4DE96A531BC733AAC19B92864B7D7579F
-:107B90008FD4EAC0DF80E73719305F7435CCD7A4C3
-:107BA000F59682DDE19EC75B5CE598471FD580F3C3
-:107BB0006CCA62F154318F7754836B1EBD6E077FA0
-:107BC000CEE77900F82CD33C6B8A2F73AE67D412C2
-:107BD0009CE761D73C6B462D71CDE367EBA1CFF9F4
-:107BE0003CC973CDE31D33D5B99ED18D38CF3FBB92
-:107BF000D733BAD1358F81F3C07398871ABE61F835
-:107C00003E96E6ED5D84F47FC687768EE68D3D86F2
-:107C100076CEEB3EB473682B0BBFA355C6FCDBDB03
-:107C2000B272913E67FC94FE869DCE719E7710479E
-:107C3000BFF8660E22495288A87E5BCE79B07EEFEF
-:107C40009C51AD501E981E5A00FEE883018CE37DC6
-:107C50007060BA76531A7D7473C273A2C7C6CF7DA3
-:107C60007A95C7634359EC1C52D44FF0F8CF5B10A0
-:107C700027A2E5DB1E82FED0711E2FEA87B715FB17
-:107C80009DE0E77A27B6B17DEACCA663ECBB3971FB
-:107C9000F272F964F81E0DFB777322CBE18F377116
-:107CA0007AF4FEC49BDC81F4B086E3777F3B8738AF
-:107CB000E285BF39F4B5E759DE1D190EDFCBBBAE47
-:107CC000E389E7A0D92BD282912BE87AEBF66FF209
-:107CD0000CA7F50F3C3DF323866D9C3A0FDEBB17D6
-:107CE0007EC837621E87FDFCCD0667FD06973DFD09
-:107CF0004656B1389F65F386931EA0D73C3863A5DE
-:107D000024BC014A4CBE33915EF34DD657C0D374A8
-:107D10009787A470BFEBC9C738673C1FE33431B104
-:107D20006FB9E09BEFD1AD28A5E7FC3B15C4A31BC1
-:107D3000DE9E4359964CFD9C9ECEFFED81FB3B039E
-:107D4000C17FE34AE77B12F738BE4320F8E0DABA96
-:107D5000EA9DC76DFCF18DD8EC9DC71D789AE3A80C
-:107D6000DFD0FC0D47FB1B572E70BC5F105FEC781B
-:107D70007F53C7AD8EFACD893B1DED6FE96C75BCA5
-:107D80005F9C5CEB78BF74CF26477D59D71647FBC5
-:107D9000A603DB1DEFE543E3FF09FDC05F2978CFB4
-:107DA000F943E3C406B0DF3E34D977FEDFE1E7777D
-:107DB000EFF1EFFD2C07DE9B02F2334907BFA1C9AB
-:107DC0004FE599DA12138CFCD51D53418F10FCA49A
-:107DD0004685317C759C3ABB53F8BD44A55323A915
-:107DE0002170BCD21F87ED55FADFAB3DF4FDA4CC6A
-:107DF000EF954E35ED7BB5474D3BEE29A9B714EC19
-:107E0000C7F86BDEB4F7BFFBE5920C87FD22D3FB0E
-:107E1000933269B0FB6FF30C161F7A3E6BDA3C03AA
-:107E2000FC218DC97BE3BEC269E037346AA9D274F4
-:107E3000E7367DF37549F89DC079069397C549E704
-:107E4000F76F97EE19E390FB57FDB16B0CDAEEE498
-:107E500061857D2F2FF5ECA8AF5F04F35BF3E0396C
-:107E600039908FFBE32B2DD6CEE3D40F78B5A50642
-:107E7000CB7F6D89EE3C4E1DB5375AEAB0FEDB96DE
-:107E800018963D2D0D58BED5D28CEF8FB7ACC4FAE5
-:107E900089963896EFB47460F95E4B02DF9F6CE907
-:107EA000C4FA072D492C851C087B9744B93D290E3F
-:107EB0004C08AB9FE66B500A441C3382DF8F3A6D4F
-:107EC0009C29053BFAF4AB5ECCBBCD842737DF653C
-:107ED000A69F85FBFDA2A433CE2C4A9F9FD1C72726
-:107EE000931AC891583B56C3389AFF990BD11EA7D5
-:107EF000CF55C2BEB71CB17F4FA26F7C481E1E3A41
-:107F0000309D44FB13DFFBF7C90BCB813EC58827AF
-:107F1000FFB34A33A3DBCEC8D72F1A187F68F315F7
-:107F20009E8D47E999DF8C82F8D4FBF9029FDDA38F
-:107F300020B8A51AD12DC087A7F77B715DA70F6662
-:107F4000B17C1408AA0D22FF75E91E5FD2AE1F9600
-:107F500075E5249DFAA23069D717A78FEE0C82DC55
-:107F6000AF0829C9E393803F2CCE1F8CEFC4F8CB18
-:107F7000BA8A9286631C67FD7442AAE9C2B858386F
-:107F8000FBEA34FE87285784349CE7BD3D6330FF0D
-:107F900080FA89C9E32CDE9964F3869276BE6C5C24
-:107FA00099953C3EA41FBE4CE37EDEF011B29FFCCF
-:107FB0004ECF7C0F77A092A8FFA6E1F72D0F7ACEC7
-:107FC000C0BEE3A5FF7D82F9422AD6C5B84D5D4A01
-:107FD000DC0BF778C95EC77CB45F58F8E8F6EFE6CB
-:107FE0009C4D77673EF86F819770DF66F7CA6370C4
-:107FF000AF9C8E774A353AA48BFBEF953771BE5C08
-:10800000A6F76831FAE8FDFD63CE990FF25ECB5119
-:10801000531D0B790409FC604443D7F819A01FDFF6
-:10802000DFBFAA00E2694B95D377A4BB2FFB91C1B8
-:10803000E26C24E9E9EDB1AD47C46708A1E3EAFDCC
-:10804000F003A79FB0D5DDFA5A947280C5DD97EF93
-:108050003D36EB4B14FEE507FEA8011C078C981C6F
-:10806000B0AD5FE2F7EA97EC795383F5BDE389970A
-:10807000DE750E3D75369C46C8711E1A27DD20C779
-:108080000BD96F30003F5DFB3A15CD777FE921F0CA
-:10809000BB0EE2BC42DC7BA827D120E06BE1FEA551
-:1080A000181F7EF7A92BB93D97980CFCF13E916BF8
-:1080B000607DEF939782936CF82B09303F86743084
-:1080C0003B46DC0BA4F6ACC3AEB9A5D3595F44E67E
-:1080D0001680DE58F4A007BEA14A1613DBF797E816
-:1080E000BAF302CCDEBD8534AF067B4EF532FF60BD
-:1080F000A149D4E1549F2EFBF14393C1EEBF30C0A0
-:10810000CE1D451C63712EB3F796E42535384FF824
-:10811000DDFE49F3BE04DCE74DAE867D9964A73FE2
-:10812000FFBBA9C309DF40F0BBE115F7DDCF8AA78C
-:108130007038943D52DAFCB42901CE775C8FDC13A1
-:1081400070DAF96B5CF5DA008FB32A44013ABF6F3D
-:10815000EA71391BDFE3FDDAF83E6F645518BEA7FC
-:10816000158D027F51BB6002B1B5FBBD11C3E7277E
-:10817000A51717E1FD72353501F3F174A2DA7F8F8F
-:1081800041F10727908B214EDA8C4EFD2A5F700754
-:10819000D45707D83DA8269053B83F1D9C7514E2CC
-:1081A000FA3A49A4AC2238FF76C6BF7D61673D0B21
-:1081B000E409F4093C007A4408C68BB2CA9CED027B
-:1081C00011677D491F9E528AFDDE47503752F87B6A
-:1081D0004D55EA49BBDDBC5C67F013F89E2A6D7F04
-:1081E0001BB7E79793701CF316438C0F6E9BCDF271
-:1081F000266E0B84F15EB2A45A783F620D74B5ED21
-:10820000634D1F492469D3EB4D6AAF067CD9F491C5
-:108210008ACF1F3662DF06BC6AC4423B57A7488339
-:10822000F36BD5A871D8BD6404FF2EA02B7F617DB0
-:10823000C074F87B422F78B85EA4FA624D201FF418
-:1082400060EF2C76AEDEA3B1F31DD64EEB6FB71EFA
-:10825000E0C8D4CED7DF6E53BA76CB7EFCF853712C
-:108260002AEF4B7EF49D201CA6BDAB260A20FFA161
-:1082700071777B10F8F81D351E8475BF9B4C9FF7F6
-:10828000FE73AEEF20DF09EEC92FE7747AEF07F730
-:108290005E05783FB3DB83F7EC9BF678535E4AC408
-:1082A000E5FB17337EDAE37D93D5D7E0EF2E341D5F
-:1082B00070CADB92C7BE5310C6C3BD38F31B490A50
-:1082C000EDE7E5BB7E3F0BEC9126D28B7AC2DD0F4A
-:1082D000E6FF2817F7AF0570DFDFFD5EE45B357161
-:1082E000BE6FDA7F2FE65535ED9F8D79544D2E39CF
-:1082F0006FE07EC88180F37736043E4892D9C5ABE3
-:10830000BEFFDD096F52784EEEFA655072C48F9849
-:108310009E38DD75D3234F8733EBF70FB85FDFDF70
-:108320002F89FDC207981D4F0EB2B2D1930A82DF8A
-:10833000D4B8DD13A11A84343EBEF3D1EF017FBF60
-:10834000E6C578C3D2C79F7BE5325A5FFA8427AF70
-:10835000962DC3803C604117B8DB0EF9BA820E4BF4
-:10836000FEE5392D7C117B7E776E3F3D963E715840
-:1083700023179D8DBFE95D8735FC4E909B2E5D6F69
-:10838000CE02BB7BD5F7FFA4817CBD7B4822438B0B
-:10839000CEEEDFB0FD39B4EB004F48474EA73EBAF2
-:1083A0009D45AFD4554F57623B13F6B181E8F53D7B
-:1083B000E0997CE4EB1F3E0DE705FFEA8D001E1AF5
-:1083C0007EF8AD20ACE76DB599F1F743ED05708E01
-:1083D000DEE089179858B2E70D0FDF8E7C77CBB1BE
-:1083E000DB0B581E9455C87F17A010E380DBAEC18D
-:1083F000752E2231E4BF868794289C937DA8929A9B
-:1084000027D2C8C7E541A6C7DEDEE1C58FDEBD0DB8
-:108410000A17FCC5979424BB6FCBF2126F17E71EA7
-:10842000F0DD465AFF5067F4CA0FCAE27B56BA83A2
-:108430006F77ADE9063ABD37D21A0AF14A8A873812
-:10844000C79B047A4839367328A31309AB93793F45
-:10845000AA27A7C37368DFEDB17C131CFDF8BEC665
-:10846000E6BF8DCF4FE1F6837DF67601B577D2ACCE
-:108470006F6950C83FB53F6C7C66937326F7BBD6D7
-:10848000323917729F9C5303EFFFED652647D00FDB
-:10849000F6790A576A28BE3F7CB5847AC14B52E907
-:1084A000E47B9787CBB7F33DF5CAD1BE157C42E19B
-:1084B0005761DFEAE71776CE4BE980F6DBA2076962
-:1084C0007FBB7D0EF3623BADFFB96DBFBF85EB8314
-:1084D000CB82AEDFDDD9963FA8EFE4357A928F7E6E
-:1084E0000FE497CA2BEC3F8D8F7B304FE40F7B9FBF
-:1084F0007DE53ACAE77FE81272EBD4A76EB96DD872
-:1085000077094927B77F302224ADDCD2E769E5D669
-:10851000E8417EFE5BE95381BF8541679E93D08F22
-:1085200099F0E8D68F7F0D84D9EF22B8F423FDF7B8
-:1085300032997C361F0AFE137CB7E49F97E1EF83E4
-:10854000F4F1A7E0BF3EFE14FCE75EAF137FEEF749
-:108550001782A122E2C5B4F4DC43E20188A7FE4CF5
-:10856000C178EA290AD36A4AE7537B8BF01E71BBB4
-:108570008FF9E7A7CCDE606E397EFF06EBBDF9DA36
-:108580006AD017E279AF8FC5BF4F457B83F63C9029
-:10859000370F2A4138EFEA49929A74FE08D5C80885
-:1085A000470FC9F49EC58B4F81FD07F3F94725811D
-:1085B0006E331563D44AF0F313ECBE7C7DEBB5410A
-:1085C000C853387570CC46D05F37BFA010FEBB854E
-:1085D0002AE49BDCC4E9FF0E896F9E4AD779D34118
-:1085E000E657D4AF4FCF2F4B78FB45C66D1AE82521
-:1085F000EA17BC658F872FE1BFC7D4B0CDF5FCE08B
-:1086000095C8574B5C7C15E37EE3E382AF269289E5
-:10861000DC6F93EDF96C3395F28D60979C3ACAE26A
-:1086200090A70F2A488FD37B2596FF04F1E029C03D
-:108630000FBD9A3D8FED24F05F9AEF1BF4BD7FF2E2
-:108640003793EFA24D1A9F7A7DC2565A9E7CEAB5A7
-:10865000D29F42FDC7BF1EF53A39BBFDF4437FC62A
-:10866000F3EC5387BC08C7A9433F1F7517D49FF687
-:10867000E2776A4EDDE365F99F8702C9B1F07E2497
-:10868000CB175AF5B33F4D60DF7F6943BABD1A641B
-:10869000FED8E983FFFE5BC81F3E7DD01B86753484
-:1086A0001DCAC2F3ADA6A77D18A739F5B33F4DB6D5
-:1086B000E7337DD6F52CE7DF413C15207590A77C8C
-:1086C0002A879D1B34FD74CA4EB847B46CFF610DF8
-:1086D000CE63A63FF39709A0774EED63F6C4079EDD
-:1086E0009E87E19CF577C11BD77820BE0BFBF53048
-:1086F000425AB29357C48D747861783845F100EBD3
-:10870000A27869007D99091FFFE71F161F7F9C0F44
-:10871000F3371EBC14E5A61F2F92C59E079270B5B5
-:1087200089AE9F3D3FF4A709601FFDA1AB15F7F986
-:1087300081D65D98FDFFDABAA5D460D65DF50FBB92
-:108740006EC6FF87826196F7E79283B3F9FCC7771D
-:1087500060FD878108C23B48F9AFFB875DFFA7A496
-:10876000FB3E4AF7E0C074FF2FD9EC5CF81F6FDDC9
-:1087700003D1FD054EF780097908A77EF6178CAF67
-:108780008BF50FB4EECDFF41D72DECA175722451BE
-:108790005C0479D8A9EEB004BFC3333701612985E1
-:1087A000E75DBBE17A3E9BF9178AC4E23664248B0D
-:1087B0001F11EE6FF4FD5EACC1EE57A9C66AF63D1F
-:1087C000323582DFD55B77C1C208E676908A57637F
-:1087D000501F31157FE7D6ED77B549C492A8FDA7A4
-:1087E0005EF0D5A360FF7BCAE4947702966F42B92E
-:1087F00086C7BD3CA6E6F0370C979FE00B3BDF7BBE
-:10880000F9783AA948C0EF77EB866A26E9FC463545
-:10881000FBFD68C8ED4CD8CE0DBDC4D69F8EB70306
-:108820007E93C5664F9E2FFEFE94CDFC4F45AAE871
-:1088300086BC58325E66DF3527EC5EF1BA1191E4F2
-:108840003AF443997FD98FCFD5DD80479550FF907B
-:10885000AD0FFD4AC2FD49950FA196C996CFD98E9D
-:10886000FB4B03D287D1635423A7CF0A073D04FEF5
-:10887000D3D0C5410F81DFF3A58B9B1E6EBCFF22B9
-:108880009BC5E7DC7472E483E433BF24450DE49FA9
-:10889000EFDD897191F77FF0E655D07EE94F150243
-:1088A000BF8BF6C1DE004981FCAA490DFCAC25FB5B
-:1088B000158C0BFF5F8242FCFF008000000000006F
-:1088C0001F8B080000000000000BED7D7B7C54D561
-:1088D000B5F03E73CE4C6692493249662633793103
-:1088E00049208246980408A82813020842AF038A48
-:1088F000606FD49167304F90B6B4D51F0389313C77
-:108900006C83220F4B7540545AA90D182928DA415F
-:108910001E62AD5FA3D25B6CB137E203150829ADCF
-:10892000FDE8BDF672D75A7BEFCC399389686F7F2B
-:10893000F7FBE7CB3F27FB9C7DF65E7BBDD7DAEBF1
-:10894000ECB97409FEC63376495C196B66CCC55820
-:10895000EDCF5319733276CF9EA4C8F442B8EEFD22
-:108960006038BB9AB19E55BD4773E17EF8A78AFF78
-:1089700029EC1EEE1E7E0BDCBF476377054B63E3DD
-:10898000C86BA6C3C4D868C6CEEE4F9913B133A640
-:10899000EC3C78278DDB31DB9CA4C4FAD91C669AA9
-:1089A00017FA05F079F8274A6488D27F3CC656F258
-:1089B000F17EA270F8F6992336846FE7364B08E013
-:1089C00068DCF9274B00E0A8FAF9CFD2BA61BEC63D
-:1089D0007D2A8B0E65F47789E173359A349CAEEF6E
-:1089E000E395B1805DA960AC01FFF5C1B5B37E3AF6
-:1089F0004B836BC7DA3FA969F8BEF954B735F67EE9
-:108A0000EDCF5FDE1B06D4D43EFF4C9A0FAE9F75B0
-:108A10003D95C64A69BCBB2DE98C6976CDD01FC790
-:108A2000BD98D97F1C98973137DCE7B75863C76A80
-:108A30003E5FE7374E33848FC138126E58DF67F8D8
-:108A40008F97B1B18E54E7C757C1FF63D8984B2AAF
-:108A50005C776631764D7F3CC5F015E6F4FCD9E7CE
-:108A60008F87013F67F79C791CE1AFFBAF3F3FFE6B
-:108A70007DC01F7BC5E6780AD6DDF8D3DFA6217D51
-:108A8000E57B331D0ABDD793CFC25EE8D7F36E52A4
-:108A9000240CB77A5E3E5DE083F5F6ECFE9BDB07C7
-:108AA000FD97BD3C291BD7BFEC85AA6C661F188EAD
-:108AB0009E158C4592F47045888EBE7D30683634A4
-:108AC0000F886B1C3D0E751E2A4038CF9D48F2273B
-:108AD000219EE0DEF272A40FD069386FDF07F86DD7
-:108AE000D8F5E09FD4E189F01CCE357990AE1F4CCB
-:108AF0004638198BE6320FE2B7B7D561EFDFBF8F8B
-:108B00005EC7819E23BE02DD76ADE6F37600DDD240
-:108B1000FAD3ED1CFE03F46944BAA5C4E8F6390B98
-:108B20003DE12D86766716D13511BEA25F015F3516
-:108B30000A1FFF7A47E07B0E949F3D297DF49A8EB1
-:108B4000F4FAD9E7050CE8FD89B9F74E368AB1DEAB
-:108B500097931CDBE1FE3D2FFF8EE4A4E785B72C45
-:108B60004847F8B32BB0AE1ED6F7D785EB6C50C490
-:108B70003A77A44693D262786F88CC98E24BA3FBF5
-:108B8000EFD3FD08E75FC45F2ED22772F0562501B0
-:108B90003D3A1C45B40E1671D1BAEB77FCC1827C0C
-:108BA00023E984F451C622BDDE9F8CF7259DE4BAEB
-:108BB000E3C773201EC6E8E8B683CB617FBAF65AD6
-:108BC0005871227A01BCF81EC20BED9E6D499A9233
-:108BD000CEEFE7C13A7ACC6C4E07C211517E97882E
-:108BE000BE8CADA2F53C1B2F97627D9793CBCBC17A
-:108BF000FD8FE2E5C70E078D2FF173F68BC4FAF9EE
-:108C000028CA39C0BFCF1E3A82FCC39835F2218CE6
-:108C1000731753587A710C6F12DEB31A23BD7BF6AB
-:108C2000A76A240CEB6FED38447A365EBE615D8135
-:108C30008E04F3FD4ECCD7B0EFE070D443675FDD18
-:108C40004FFCD7B0EB7D4B18C639BAF3794B776937
-:108C50008CDF517F4774FAFBEC73078793BEC5F135
-:108C600013E89B0FC5F88D078CE337EEFA9361FC90
-:108C7000DA7087C561BFFC3C9F6981D9B8DECFBA85
-:108C8000CC0CF5DF671DEA944882795F17F64BE25A
-:108C9000A9F52D0BD9B1516F274792004FCBDE9A22
-:108CA000F28774275E2D3E402DEB5CC9F9AAF3FED6
-:108CB000402ED2A5F3AD6FAA684FF6221EAF888D65
-:108CC0005B71BCA92A15E4B6E2647014B255BC3ECF
-:108CD0001873C264801BE6C946FDDC02E3F8601C21
-:108CE000A6F93D4118574D9B3C05E1511D26872DA6
-:108CF000A15DE5E399ED411602B8CC60B77D3A7EFF
-:108D0000F2CC4C1BCED271795E13EA85A5C05EA869
-:108D10009F3D16365403F89829D9FF148CBB74581C
-:108D2000A0EC08B4972EF0F8C3F0DC7B0B7FEF9C2F
-:108D3000C31E368DC0764104E528E5A2CA7CA0FAA0
-:108D4000CE2ABF5EC84025A408BECAED48213B9389
-:108D5000A2F93655433BA546F30346D947F6507E64
-:108D6000860BDFB3D07BDE0C45FB18D79DC6D250F7
-:108D7000DEE4F8B29F1C9769D1E1B87E66651A03FC
-:108D8000BB92C738DCAA584F31EB5290BF9B67A407
-:108D90006DC7F6D6D41AB2FF05ACF76000E8F664EA
-:108DA000DAE463A8C7E05F13F6CB6F32DAF741CBA2
-:108DB0008DEDC2B01627BF3E5310F8AFB8CD78DFA7
-:108DC0005955B964901FE46C7DE7140DF4B77376C0
-:108DD000E5EE5CC0E9B4356FF3F63395655E681F68
-:108DE0005F5F3755033DE2FC4D655901B4CF3FFC51
-:108DF0009DA9F4BC1690742DA8FEF5574F0D97C68B
-:108E0000E4D60560A6AB24CF37201ECE05CFB6E250
-:108E1000D3FA597FB5C023FC0B221EF2C7723CE483
-:108E2000D94FEE66D07F90A97B25F2E5132FFFDFA7
-:108E30000CECE7630E5AAF83B5383EB6E2E2D9D800
-:108E40004B23BF4C9F69EC63C9876A4C0E5477E88B
-:108E5000E60CE0ABD6B943374D465D5BE727FE82B3
-:108E6000991D640F657F8793E8335FD007E1B402F3
-:108E70009F2DE05DD822356C61346EBB2548F66AC3
-:108E8000A203E753C275EAA5ABBE3E5CF3907F90A8
-:108E90001EA92C15EF6B753E82EFB02BB090F0E65B
-:108EA0000AD155DEF7CC9DE30B019E6FC808D6E0D2
-:108EB0007ABC0B2F16E03AA667301AAF6A913D8054
-:108EC000F6F5C201508309E44B5EB7AF607E6DC812
-:108ED000C0CF8399A16FE3BC45BFF4ED3906E38DA4
-:108EE000986FF1DB608A11CB47F9B52CC61784FE69
-:108EF00087A09F07698AF2F76D1641F93B9FA4048A
-:108F000002D03E7FAF83F473DEFCE9C7D0AE9D4F45
-:108F100029EC88E2FDEFFB482EC11350502EF20FD2
-:108F2000A4476D69C4D77F8DE3EBBF1AF9D838EF3A
-:108F3000F94BBE7DDD349E438C078E113CCF17F478
-:108F40003AAF72FFFCFC0A1FC1016EE441B4BB5F83
-:108F500075BE4733843D15F4B9DF16D8887801FC17
-:108F60006FD6E37FEBC0747C42D0F18944745C68B7
-:108F70006D2A40FD704FB06332686E362323B40310
-:108F8000C73DBDF068AB19D6535FDD54824CDF9FFF
-:108F9000BE0AE973F781BB579AA1DD88F4F1F5A702
-:108FA000E388E565442F1D5D3B108E1107FE64428A
-:108FB000B8253D3729DC0EC4BFFF528622E6AD5BE3
-:108FC00069063C5ED86721FF37BEDF910C1FF59321
-:108FD000EDE1D60ABF06729A6D62A144E31EE9373D
-:108FE000AED59F9400FEBEF11C7C3CC0FB6B7ABCEE
-:108FF000BF21F56F7FBCFF1FEC0778A7EB57C0FBC5
-:109000003B5F8677E96FD70ABD50CBD6919FF95168
-:1090100060A67B30CC3B59B513FF2F7E4A25B98320
-:10902000FED3BDEE981E597C4DD3415CE7E21F2B69
-:10903000C4A7F3435CBF9F5938FD28EAF505ED4608
-:10904000BF69E11CD03300DFA2CDC6FB8B23717159
-:1090500020D3E973E08733317E1DC4F58C87ECA4FF
-:109060002AE4A16A51693AFA49AF987DBF213FFCD1
-:1090700075956D4F80F7FCCC42B2C37DED264086DE
-:10908000CEBEB3F93613EA4939EEC445A5D9E8CFC7
-:109090002C4DF57D69FC3568B9D19E178693994FA3
-:1090A000376E715BA6A13DA43DC7D0FF8ACD458632
-:1090B000E7C322571A9E5FB5B3DCD0BEBAE35A436A
-:1090C000FF11FB2618DA65D19B0CFD471E9B6968D2
-:1090D0008FEEFAA6A1FF9813730DCFAFE9BEC7F0CC
-:1090E000FCBA4F961ADAD7F77ECFE8BF9818E94551
-:1090F00096AC909E3CBCE2938A0F910147291311D4
-:109100009F556379DFC34B2C26471A5E4B4C0EE00C
-:109110008F57174C27FB7F78893BE0A36B4500E313
-:109120001EA68E1B154AE0DF4E727C5AF1A16EDE40
-:109130002AABD9A0D726398CEDF24C11170EE27C60
-:109140003326D328576AD3F4A8059A398B0767E3E7
-:109150007C205FD76672BD46D7AF205FE3B1DFE901
-:10916000B4682BB6A57C31615F2B051FC135602922
-:1091700047864A253B1CC09B3EBA1FD6203E9960BD
-:10918000F5E71DC1F598FC4E64BE89738287CD9CBE
-:1091900003B91D66434D5FC70E4BF9F6987C61B26B
-:1091A0005F998CF2495B1694A4331D5EE764F2FC70
-:1091B00011D87D7E75EC1CA949FC15E9EF4F19AD5E
-:1091C0000D8DDD57164DCF4679F30CA0072D9EE28D
-:1091D000613B40FF5ABC857495F75BE798A6441243
-:1091E000D0B536531170703F6B58CCCFAA257A7822
-:1091F000DEDE3804F0D550DD4B7E96C7D4BEE428C1
-:10920000AEEB572ACF93812785FA6081F09B174CEC
-:109210007D78C951D04B0BDE1C427A49CEB37545DF
-:109220007498DE3FC81B208E7A3A93EBF1C757043F
-:1092300086CD1F4270915E907E7941B87E32C637EE
-:10924000835813C5891B4DAC26D1380F8A71B29152
-:10925000E408AFC34EF2716EE1C9340DD6919C1A89
-:109260007A10D737774457058F0303FE99E07F15AF
-:1092700044EFD888FD0B3C1A8B28FDE7CFAE0EB526
-:1092800015C2FA5A324D7E3BB57B15EC9F741F63B5
-:1092900059D0BFE5BF5482A7E5D56B18C66749F61C
-:1092A00026867EAC5CD7A1CCC7083F6A670AD93D49
-:1092B000862E28E0EF5B82F69F7BE677A17FF1F9AF
-:1092C0000633CDF739ACD101E37FDEA946D0593F53
-:1092D0009A991C35415B6D4B257B5D803E27F45F81
-:1092E000D8991AF115C6F0A26D1EC7A260DF92F2DE
-:1092F000F8FA5B32ED117B21ADFB8799A36370CA4D
-:1093000075E70F1077BE22E06681A1063A7B210641
-:10931000EBC2B93570F6611C758399E2C205197606
-:109320008233B2223C6CBEB9FFFA5A3D336FBE1D88
-:10933000E0693EAE3215C6F175B7133E16023E2205
-:10934000BEFEF83EE72BFCAB4925B85F417AA99BEE
-:1093500027D3BA18FAF1F05EFD130A7BAC10F9328C
-:109360003485E89C63624F1526F00F50DE5C883F21
-:109370009E3FB0784AB89C78060FDB01E3FD2A7364
-:10938000407FEBCD4C6EF7E91AAF97C0FE85118E8A
-:109390000B9B15A2E76925623103CA6A6F8D1AEC2F
-:1093A000BE1A50C9DF88870BF4D8894C9D9FA3A6AD
-:1093B000DF371CC71DD83FDB7DD082FE9983917FAC
-:1093C00026F5E740FE19FA65C87FD22FFB384E0F0D
-:1093D000C3FA3E15EBFB34D1FA12E8DD1ED2BBDF37
-:1093E0008C26F46B5C96C47A29378BEBBB46878559
-:1093F000511E6A80BCBA2B4BFA71DCAF1848CF5DA6
-:109400002EDE285A5B4AFAF642972F3D13AECE0F56
-:1094100094A644E3A8CB9F1D8974596CAB4CCA0237
-:10942000F8EC5946FC6C59DDCF4EA567717CD1B57F
-:109430001FBEEC802F93015FCEAC2FF503B9DECDBC
-:10944000C1BC14CCD723F003FAF722E9DF5B7A6EB4
-:10945000C358B1FE962F449CCBFBBB859E8638F843
-:10946000868F7CD4FFCF48BF583CDC5D817150F3C0
-:109470000B57A4A31F3571EFED0EBC5E700E26BC1A
-:109480009CDB9B14C079CE6582FEB4637BCC51CC4F
-:10949000139C59712C538FD773CFBD55618671CEF4
-:1094A000ED79AB42C37C83C8A7C8E7F597DEA9086E
-:1094B000C2FBE1096C68935D475F2BD7EF1B6C3CE7
-:1094C0001FE1725B5AD908F06B5D19F4FEA36ED3ED
-:1094D0000FF0BE6A7DA7E04394E7B8FCCB06B3AFBC
-:1094E000D90E7C0E31961FF3F84B8705BC0B30FF6D
-:1094F00032C34379936685EBBDF0021E1F3A8BD8C9
-:10950000D04218CF6C52557CAFD7CBFCDBA14BD2ED
-:10951000E1F628AAA9E4AE8E00823F2A3993F07EB4
-:10952000DD598782FEBECCD768557CBCDE5996C813
-:10953000765D9EC63347233B96A27530D4ABB35CB1
-:10954000FC7D99AFA99A39275889703D60A27803AC
-:1095500014A582FA2B57ACA3D0BB67B5F4453437BA
-:10956000B215C3E40C5B0BFC3B18F09CE6330530F2
-:109570003F9A96173D61063F2CB785B1533A7F2F2E
-:1095800005990FD7F3A61AD90EF29FFAC578EB1CEE
-:10959000F0675292B9FCA4055B9760DE1AEFFF6B8F
-:1095A00039D285BF4FF451318DC4C2E90072EA58F7
-:1095B000E3B8927E9D2BACFEC1C0A87B5638E8FA7A
-:1095C000F40A0FC1F5F00A1F5D7FB86228DD1F485D
-:1095D000CE2E777D6805CCABE327E718C00AACD761
-:1095E000A93292C7874657A4CF4DA007E4F5B1151D
-:1095F000C7DC13870804023D72EA1CDBD614129DF7
-:1096000051686075AFAD0E8C63EC0173600903D6D1
-:109610007A20EB8B8998575AAB98288FD49A75701B
-:1096200075380FAF3E4EB743EF32CC477A47B52B74
-:1096300028AFDEBA76E283515D5D2C24EE07A0ED03
-:109640003DCEEF3F60E3785EC7D81484D7AEB0203C
-:109650005E7B6CDC9E7C6CE37AED53712DCC0A3D15
-:109660009C05F7FFE23851F20080672BFD7D01EE8B
-:1096700047A41CFA1BE56BD5E1162BCA87F7C0FB84
-:10968000B44FA19ABA2D0C4CE8F38FBC4BF92FD5EF
-:10969000122CE4ED9FAFC175B8D282DBD0C562E178
-:1096A00077A71EF680DC203F5C4BD808A31CAFB523
-:1096B0008976F8DF080F6BCDBCFDFC23BF5D1DA6CE
-:1096C000767031E205DB2D88978C0E8F09DAF695DE
-:1096D000EFAC3E763DB665FF77A8FF7359DC3E32AE
-:1096E0007BD08BFAA3AFED80F6D5BAB6C6DBCCCA79
-:1096F000AF727DF587FE763417F8B5E180D281A090
-:10970000790FAC57709DDE7DEB09DFF407F281CB5A
-:10971000A03CA6354C79AFA7571C73B4009DB5CCBF
-:109720003637E2FD0A4F281048A0AF7FEE92FE2A9E
-:10973000F4D7E7BF22E6DE6E9DFFEC655C6E580B4A
-:10974000E88704FE4091ABF23D27AC6383125AA335
-:10975000A29EF999D9817A8475713D74568CC5227F
-:1097600039E48FD4D978D3BC2AB46618EA893B345B
-:109770003FC6B9B585ED95688F6BF717FA57B218E4
-:10978000BFD46674B8CB917F328CED669117C9CE89
-:1097900068CAC828C5FD82F50598CF6F60ED777E51
-:1097A0000FE1FDB5CAD0AFFEF4E035E9D741BB1EED
-:1097B000DA68E7EB3BDFB2207F3EE8E4FAB3A113BF
-:1097C000F807C65907F21500C7639BE64846FDF443
-:1097D00074A0E94A74C97A1FF9CB541B3875CF14A9
-:1097E000051C446FE7A5D5566C5B1CC35819B62DF4
-:1097F0006B90DF6ACB4C5C8E98E557014DEC4F4285
-:10980000FBB78F54DD14B6C7EC8D57D8A7C6ADF69D
-:10981000B089DBA7F368D71A369BC2A8BF4CD62EF7
-:109820000BD2D78E7BAF441F07E16D99D4E771FA55
-:109830007AD9D4CC9BB0BDEC812247F84BF28A3563
-:1098400017535844E7CF3CE8E4725CA385699FA3B3
-:10985000E6621A3DFFE7CD676391915F369F9D9E5B
-:10986000CBF9EA62F3115D0F95FF6AE360A0DBB20A
-:10987000DD6653928EEF96ED16FBC9B640368EE349
-:10988000B2308177F0CF01BF5A615F3BAC819C3F22
-:10989000D427E7DE3513C721DD62CFD958831E08F0
-:1098A000607CF850B2D4038589FB27C7F52F92ED71
-:1098B0002BA97F3C3CAEE458DB0AFDB5BF27F5B5CC
-:1098C00011BEF5A6B8F132E5FCE56B26E6C5F8EA6F
-:1098D000B759D7FD2A3C189E67B457627D45EF0201
-:1098E000E643BB8CFCEAD7E9FDDF0ABFAFE662B115
-:1098F00081DE31BC9718EE9F5EE131ECCB2DAA5E84
-:1099000046FB87BF157ABE8685290EAAD99ACB2237
-:10991000BABCC4FF87E31F85E3BA01E0B8E17F1951
-:109920008E42837CC6E0186CB8FF8FC2B1FDB69240
-:109930009B0AA1CBA34AD85A8476E17E13E539D499
-:109940008C89BE95B82F70BF467E1EBA24589F5191
-:10995000A4B1635A39CA4F7B00E372B68AE77BE051
-:109960007E9BB99CEC10F9C1C50792EE463FADA8AD
-:1099700026B018AF2CAF94F61DE4BE1D13792BB999
-:10998000CF30C4C12A3570DE46B8EE263B5514AC44
-:10999000AE45674E4D1D958CF6F15153248CF385E1
-:1099A0001FE6F3B94C910E2BEADEB4C10EB477AECC
-:1099B00034AEFFD89A52B27FDB4D45572E01381E88
-:1099C000502A935F473C6714519E16EF2F85FBDBAF
-:1099D00085DD5233FC0EB453DB85DD6A16FA5DDE9D
-:1099E0004FC90CDE8DFEC44967C34DD66B500F05C1
-:1099F000DAB2C0DEFCC1D9B0C6730DDA1B5F9115B7
-:109A0000ECCB1F36D4AF417BB37DA52FC791116B33
-:109A10000FF93B586BD213F56BD05F69B12FBD07BF
-:109A2000FD1D78FE2B2BACF3994CA177C4F3A23E1D
-:109A30003D057A09F498BAB2AF1D46BD54D4A77754
-:109A4000EA49EFEC785CA5F641980FFD3E5847587F
-:109A5000C5F50ED1C8AFB7012CC9D0B60D2BA2FDEC
-:109A60001B58374B46FF7A187F2EF3EE962126CAF5
-:109A7000BB637FC4A3CDCBFB5B66303FEE3759524F
-:109A8000ED1487C83CBE2AF68F92451D85E298C129
-:109A90002EC1FBD675E54B311EB30E36EE935AE25E
-:109AA000EA2DD4F8FA0B7B94FCAFF79C22FF9EC5FD
-:109AB0003C978A63F719F397E3D57D7B4B25C2BBAF
-:109AC00034953954CC8384A2B40F196FD7AC604756
-:109AD0007D3AF9B0DA5920D17EFF8B2EEED7DA2FFE
-:109AE0006A14DF6C50C0BF413B9ACAF94CFA476612
-:109AF00087E45BA3DD95FE923983AF65D9D409D99C
-:109B0000187FABF68015FD9C838E728AEB55E6BFFD
-:109B1000B952E7EFB444A752BE4C7304C80FCFC686
-:109B20003811F33D0E3FD3FB39AD2B20B0BC82B1D1
-:109B3000272B4A26A03C3C668B5A8B91BE8F9A28D5
-:109B4000DE3B547E4F58C17CD9724672FA64857BE5
-:109B500002E6BBB769C1F43B505E8EC37C3E4E3714
-:109B6000BECFDAAC607EF7736B301DF5C143C8F72A
-:109B70003ABC3CE9E27EFD0527F73B1F3073B9682C
-:109B80000578A2008776F12ACA473DE0E2FAC95279
-:109B90003D91F23516C007E6E3925853D841EBE504
-:109BA000F9B5248FC950B7A75D1C4EEF5F709A0CB2
-:109BB00071751BACD3A7D35F3616A6FC1AE2F8A9C1
-:109BC00004FECB4141372BF8433EF24FE2F6A1FBB6
-:109BD000FB47E4AF48FAF4F9290AF8275F128F35FA
-:109BE00042BCACD7F78D5A2FE9DF468887F17E8FCC
-:109BF000C34AFEA1AC4BB00B7DD6EA09B55F877CAA
-:109C00009E9C361CF3001AEB20A4ACC3BA04D48784
-:109C10001EADB78FFF41E69B6D69DBB15F8BA8532B
-:109C200048F11BE52799B54703289F437572C31078
-:109C3000DF611A37C967BCCF5888619CA179E2EB14
-:109C400018C27DF54A546FA7B12DB8AF2CFDDE5C6C
-:109C5000512F742EE58F1528C7E0F78ECEA2BC4D8C
-:109C60002FC52D325FF375FDE46C1C03E3D1E57F56
-:109C7000AEF810E56CC6E442BC9FA2713E01575C91
-:109C80004B2AC7F06AF2E20C58FF37B238FF39D5D9
-:109C900076AAEB785ED8B1BF38E678298E027C527E
-:109CA0003D4CB2BF9BE245E1A7A97DFAF1DDD501AC
-:109CB000A3DF19D6FB792B1E7D77754B29C52BD4D5
-:109CC0007EFE9117D7603CF8804DB65FA036D8B9BC
-:109CD00028C64B6C6F920FF910DE0FA0BCB1DB4AA7
-:109CE000C8CF568B580EE263629A95F4A6BA3769CC
-:109CF0003BFAC110173F97A5CB739E4B3D5180FE99
-:109D00007082F1C286F10ABEDE78307F27D6CBC8DA
-:109D1000E713D3364755FE9E0FDF63795D7F0CC393
-:109D2000F88FBE90C4D6000A1F331BE55D5E378AEC
-:109D30003813F58DBE5ED1523D3F804C2DE53AC9BA
-:109D400093CCA23A7E9272AE5D1CC6A23A39C97615
-:109D50001512BD342D407924ED62293DBFE0E47C2D
-:109D6000D0BAC27199793207986724E98F81E7A93F
-:109D700010FA85897CA346752F522F0C24E7F1FB3E
-:109D80005AF17A515EA55E4CC1B1E1FA82CB984797
-:109D9000BF6773C75164A1CFECA17DAED158BF742A
-:109DA000320D4D789D293A1CF9F8A3FEF71B70710E
-:109DB00051CC33C0FD929D4B5E45763DEC0A7D8AC9
-:109DC0007ED02B2E919FF5803D54D1DE81BD28E5BC
-:109DD000F96B27E66343BE4D9318CAD36D948F5534
-:109DE000DD419F0BF13BB382720E12EEB52B781D55
-:109DF00099D4B3762D44F8B26A617E7584C08633F7
-:109E0000F6B1EBD24D189B691A97A35F3F7A96FC87
-:109E10000A9B1620BEB2394C3EF40B6C1017A2DE22
-:109E20005DE930F1FD168F95F2F5AD0A4488A03753
-:109E30009666147DE93EB6E5A29BEC2D40E2D1EB9F
-:109E4000ED7FFE3C4E611F8CF3680EEE37B043DCB5
-:109E50000E23123ED0E963E90FC4BF173FBEC4A76B
-:109E6000C4AF15F15A4AF630A1BFF1776137A5FEAC
-:109E7000CC96FAD675A2240A77EB95EE34F46B40B3
-:109E80008FFE1DF9A4E1EADE34938FF4AF9BFB4112
-:109E900061F13EB3EBF95AE6A9E5BA24FC4B5F5FEA
-:109EA00060D5EF97C4C31B6F67EDA5C6FA029BCFC1
-:109EB000585F20EBF6552D487C631E17B0A29CAC72
-:109EC00074943BD0CF69D17CBF0B505D8499FC6DFD
-:109ED000F0DF0DF3CBEB4320FF08C710B7C950F7F5
-:109EE00022AFA9B80F92E0BD496E8EBF870EDE4E3D
-:109EF0007A58F3F37DA178FA31D64EFC925AC21CFF
-:109F0000943F15F0A65D66DC81F8E807076DE4274D
-:109F10006B63AD11ACBB8C9F4F3507030AEADD3292
-:109F2000467EB29ACFE7578730AAD34E1B95C98693
-:109F3000EAF0D8EA9949CF97BA1C0CE9ADA69A8203
-:109F400089F845E2C9E33619F6AD3D926FBCBFA76B
-:109F5000FD151DDF4C74BBFAF38DC7CDF521C2A1F1
-:109F6000A76FABA7283B117D627A91F3D5E5F8A2E4
-:109F7000621CF03BDA79B86E8375746A6CCAEE5273
-:109F8000848B515D7BDD6C3B73805DBBC353799BE0
-:109F90001BC6ABE87A95D78B77BA2868AC13EFC7A6
-:109FA000CFFFB69BEBDBB7DD5C3FA69F083C3B1EBB
-:109FB000F0DCD995EC53E0516766623DFD03B76272
-:109FC000AC37D0BA87A3FF22FB57541BE70B0BFA21
-:109FD000DF2FDF0BDF9C89FEDC74C665A3D8AFF0F2
-:109FE000FA867D29912168575954BB05F0BA53C4AC
-:109FF0008D3B219E9C01E3BA935908D7EDCA827626
-:10A0000029BD1FD86D8F8DF76B8E3236A938B803F6
-:10A01000C79B94ED2D6B2EE4EFE3384792598BB537
-:10A020003C86F79B9380E532F17938674969ECFE0D
-:10A030001150EED8CFEDEE1EAE80FCCF3705DC68B8
-:10A04000473E7CEB7B5427BA88059EFC10E87335AD
-:10A05000DCC4F8AAE244D0827AE1537C08F87EDCC2
-:10A060001E5C8D7CB2A07DEA93FA3A17B6837F8797
-:10A0700022F1D59F1FB8FE0138C3D64C039C6C2C2F
-:10A08000C26DE5EFC5E3575EEF127C2CE909E8B934
-:10A090002A55D0730DA07E6E0AF7973B2D9C4E7DFE
-:10A0A000FCE3B2B4E23ECA592B7FCE0243B97F6FC4
-:10A0B000E5F4999B521041BFBA530BA4A07F3FB760
-:10A0C0006FBF3E40DFF5D4D902E9D720FDDEE2F1D3
-:10A0D000D7E94A7B9B02E39C3607D2516E4FBFA55E
-:10A0E0002A2BA9FE81D747CABAB3D366DFDA2BE1A0
-:10A0F000F9BC1FA98195F4D818579C6581916F62AE
-:10A100009CB54FA57DBBC287EF56AF86FEF321E01D
-:10A1100040BD34B7CA1E467FAEF3F74D7F44BB3611
-:10A12000EFF124DF2A98E7F0E6917FC5F6C7EB52FE
-:10A130007D4994AF2D52BC98475D5FE8A0FDB7E51F
-:10A140004CF8ADF74EAB1ACCD84FF15FB90F026B9C
-:10A15000FE98C9E74FAC9D08EBBCD2D569B2034C61
-:10A1600037643FB1D60AF47E6065D0837988731B6B
-:10A17000BFB516F3106E77A06BBC1FE0DBF49D69D2
-:10A18000D8EE7C4C8C175EBE16F30E2F9942850AD2
-:10A190003C9FB269FD34AA532E96E33FB53600F6D4
-:10A1A0007FEE1357FCF5048CDF90FD8B69E81F00F0
-:10A1B0007D053C0708BE05E364FB604A15F80ECE3A
-:10A1C0001466C8C79A63790DCAF7764A3F9D1D99F0
-:10A1D00086F9D879139AAA34187F53F61B6B4B87EC
-:10A1E0003136A6BDD21180F6D6EC37A7A5009F74F4
-:10A1F000B2402DE64D22D9BF9966BD1EC6CF328E24
-:10A20000EF54455E3FFCCE5A1CAFA23A5086FE4C3E
-:10A21000A9E7C3B55678DF8575AC30DF6D9B87AD98
-:10A2200043BF5EEAD17F117A14F4E61994877A6B02
-:10A23000F7514CF5162CEFB5F0FA66A13FF2385FF6
-:10A24000F7B58776F37A74D9F6F076E7AAC4FAE818
-:10A250002F1ECEF79DC9899FE76673FD23E526FD76
-:10A26000040BEC4A203FA66CFBFF48FEBCD9FF8FD5
-:10A27000F45BC665F45B86D46F029FA5467D0DD363
-:10A2800008BD7F6511EA89636E9FC15E5774CD2456
-:10A290007BF2AE47E8151F7FDF55C5EB817AF7A744
-:10A2A00050BE8B59BB4A904EF2BDD102EF550F4EB6
-:10A2B000DF84FDEABACC8CBEF3D85DF9A57E651DBE
-:10A2C000E6877571489D16A5BC401DE68747E27874
-:10A2D000BFB6A03F84E3E0771CB80F82F95D5773E7
-:10A2E00062FA4BBFAAEE62060B8FEC6F7F63E33B13
-:10A2F000E9F9E5D6151BCF98BFE83F9E45EC27C589
-:10A30000D9494B6238AB259F02BE4D3AFE5A20F820
-:10A310000DB427F9933D7B876D5F53A89F977F5FAF
-:10A3200005FAF9D9F1A82F41DFA3BF59A105A6610C
-:10A33000FF8AAE4CDAA792FC21F942D2B533B38939
-:10A34000F27EBD5B14F2A7E2E19A27E1DAAC703F3E
-:10A35000A43AA4DEAD834FCA038CDF29C61F35960D
-:10A36000E4E7C7DC9F06B9B903E517F7BD711DFE29
-:10A37000EEE133AFEE0FFFAF851F0574E4F87FC148
-:10A3800046750AF1F63286FFDCCBD0B3809E4B7F58
-:10A39000A86E40BB9946EF659F88A6F9A05F97E03D
-:10A3A000FFCE8E0FD2AE43B9D8A732C5C7D78D7AAC
-:10A3B000AB42EAE3F088372668E497C5EC878FFC68
-:10A3C00033A93FA3566BAC7F70E388692DA8BF9378
-:10A3D000B8BC3A55B036E531381ECEE67A6C6C28FA
-:10A3E000717CF303772A3D97F8DEB2BC8A7D00EBDF
-:10A3F0003B21ECFDD8EEB082745920F0D8E7CF08AD
-:10A400007D767352F773E2FB10033FCA36F83B0DBB
-:10A41000A662DD733BD7BB723E80B78561C90A5C1B
-:10A4200015B8DEE62914E370BE3CB5377B1BEA0F96
-:10A430006771A00CF58DE42FB02762BDA6BB66DA6C
-:10A4400039FFCF4C4087E785FE5CB099AFBFF33F43
-:10A45000AAA6211F74BE9D99B14AC7EFA7841F29E0
-:10A46000C795F224DF93CFF78BF15EC94E237C9C16
-:10A4700012F8433812D58BC9F770BDA4AFDBB8BE54
-:10A48000867587914EB0EEB0528EEB560C76A2CF09
-:10A490003E087CD75B00CF80C79DE6700ED631B9F1
-:10A4A000703EFBE5E517D643CF7BF7A792DE891F09
-:10A4B000FF5C368FE7B699789DD51113C833CA99DA
-:10A4C0009DC3DBB3D74BE3760B3EBABC3EFC6AF2CE
-:10A4D000B3CDC2EB62017EAA4FAC7F31779B11FEF8
-:10A4E0009502FE50337E87E7DCC4FCCD8CF0164528
-:10A4F0007CDDEBF171FD640991FFD6BB8551FC3A1F
-:10A5000004FC081FB41B83F672A53026A7251D0A7C
-:10A51000D1B16203D869C49B55E2EDF55DFA793F8C
-:10A52000CF4E357C4F5827E83F04ECFBB300EF10CB
-:10A5300018E739829BC3756A63C77598A7EBB3F7B1
-:10A540009E34C10FF170462DB91C4EAACB407FC777
-:10A55000372A06278E8FF3307B70158EDBF0CE9E68
-:10A560005CFDB8E91ECE6F4E75EE041BEAB1F5A096
-:10A5700057491D840EE17716F30F6438D6308A1BD5
-:10A580004C181FCA79E78B7C2DC865C50C585A49F1
-:10A59000DF3CA03F75FAAFC863E7FDAD5501AA7770
-:10A5A000D3B87D72B59FBE1FF73106B2ABFF2C7ECC
-:10A5B000003AD2BA7B77C3BA7C31FC7576DCBDCA6F
-:10A5C00086FAF204F3A3BE94EB1A52DD9D86753C25
-:10A5D0008D428F025E4CC807CE1FF958B34FA79F1C
-:10A5E00005FD86322E6F323E198A1B2CD0BED63323
-:10A5F0005CEA1BCA179C7AF1E567D7505CC1E9D5C4
-:10A6000058CDE92BE5F50E4FE85E0FCAC1ECFB68AB
-:10A610007F07FA55A0BEABDBC0E7817E1D8CE4B698
-:10A62000ABA01AF0F72F9ED4847473063B6CF4BE73
-:10A63000E0FF73FBAF8E201FBA6EEDADC2FBC00F03
-:10A64000044F67476A04E366F297F1FD97156EBF02
-:10A650005888F032BFDAE1D7F38984AF8FEE0CE887
-:10A660007E75ECFE906A3E6EE33E18978F43F25380
-:10A670007717A37CB3A40F801CC6FCBED43B2EFC72
-:10A680002C3E338647893FF97E03BECF78DE00E358
-:10A69000BD46D64DF9D33A359887F11ACB4EA2EF85
-:10A6A00054210E26FD73C4C6341BBCFF1A5CD1BEF8
-:10A6B0004F5297D0F742938A159273D010326F168B
-:10A6C000453FF2E6F129A41FD817F70EC6F5B85298
-:10A6D00038DFC13856318E95FC54A10F7F5300FAF4
-:10A6E0005089E9F1238A42E31CB9FEAAED549B2963
-:10A6F000D689E3A1DF7044999147FEACC86F00DEB4
-:10A7000086EBFDB318FF86055CDD05F85C1F27614D
-:10A710005CD3176785C7AFBB11E2AC31533AA226B1
-:10A72000074AC384E9DF817927419C6583F5DF8F80
-:10A730007C8CFABE30ACA6215C4360DD70EB6872A5
-:10A74000A8B4C91E9BC72DF25F6E51B78CFE3C5E4C
-:10A75000CD5E6E57D67BB9DDE81657703B12E6CB5F
-:10A76000FE533CFF773BD7E36B2A13D7376FF118C3
-:10A77000F39D378BFD2288B7B620FF40BC25EA77D2
-:10A78000F9FE12F8B584DFAA07AB69DFF4F3AE591E
-:10A79000E9FCBC072EFF0B44FDEC5DF7CFFA21F27C
-:10A7A000DD8758570F74FC48ECEF7DE808A4619DE5
-:10A7B000597D72E23AEA5F7AF83AEB051E4EAFE055
-:10A7C000E7332CC07D4DF083777BB8FD5AD47ECB28
-:10A7D00064A4FB2288E3715F53D64F483AD76C5587
-:10A7E0000DFB130B705F33EB1F8923CA06882346CA
-:10A7F00019E208396F7C3C716A85C7B08F32B7BDEA
-:10A80000589C8FC1FBCF637E827B5E5BAE611F96DF
-:10A81000B5B9BED2B906183F8413C26731DC3FB563
-:10A82000C20A02AE83E393C1547FB2C513FA9DC737
-:10A8300000470A0B1BF2C9E31CB4DF6FE3796CA07D
-:10A840007F58EF57C7C375C6F38FC66BC503E0B912
-:10A85000E47F255EAB18C7F51A6B57A89666CCC483
-:10A8600038FF59D8CB4B9E14431E607EB5B19FEA8A
-:10A87000E5F1BFEA4D31F8CD03E501F47EB3528C2A
-:10A88000FA838FD720EC56E1676F531DEB782FF7D3
-:10A8900033C6E60492BD705D27EAD8D7D9F877FEB3
-:10A8A000DBFE7EC8330FFD8D37CD5477C0F671FEC9
-:10A8B000A9FCF1B2663C37C0DEA138F4DFB57E6397
-:10A8C000B912980FF2E0167AA2CECFD753E78F5A7B
-:10A8D00006DBB1AE99C391D77150D1747A23AF869C
-:10A8E000F7F379CD86FA80C15E7E2E439157E60D4F
-:10A8F0002307A73AB17F40433B93D3A1901DCA6978
-:10A9000062F43D4ECE28EE9F7D63D436655E696C61
-:10A91000BD6DA619A50E78AFCD9DE247BDBD2A2716
-:10A9200074A517E13B198D623A67CCC92E0DE3A7D8
-:10A930000D3981AB100F729D3ED59183F627E5242A
-:10A9400087AFBD2F2FC1F536636B055CDB797CA823
-:10A95000B2638CFBBDB48FEB5E3594EC875C8F3BB0
-:10A9600053E85F370BED21FF9BB591FDB3727BEA96
-:10A970005E55427EB2A46B2C9F32AC1CF329C5EB12
-:10A98000A2DA5C78EFC5ADA684E7584C15788775D8
-:10A990004CD4AFE372F22EFB9907C85349BE4F99CE
-:10A9A0009238FE8308909E57FED8F94D92CF160B31
-:10A9B000C3FCA6C4FF869CE06C8427A7639B82B877
-:10A9C0003925EA234E25F3FCEDA935CF2AE887DDAA
-:10A9D000BB9839543630DC75CBD5C07CBD3CB758FC
-:10A9E000882E320E88C1C3E396262FD7EBAFE7043B
-:10A9F0001721BD1BF6ADA7FCDEE21DEF5BBE74FFA9
-:10AA0000E32BE24DA9E1F14DDD1C2BD55155FE584C
-:10AA100023BAD7B65868BFB26ED76EFA8E8DDDC72F
-:10AA2000FC28FF751DBB95F9306FEDAEDDCA021D28
-:10AA30001E73EB2254377E45AACC5F472DA8CFE387
-:10AA4000F91BF3FF68F78FDAB8FC9FADB487319F2D
-:10AA50007DD61CAAC37E67BD297EDC3F95787F6DBD
-:10AA6000F78D747E40EA9EA4285EDB4CDB3D56E801
-:10AA7000D776A5C58FFCB42127B40EE992A9053B72
-:10AA8000F1FD0C67AA1FF3E1BE24564E76EF2BE2D0
-:10AA9000614C1C5F8CB98FCBCB2B42BFC01FD571D3
-:10AAA0003DEDE5712E6E07A0BE3A6AE6EBD8C338DD
-:10AAB000BC666FE047C4B7C73269DE9CBAA882752E
-:10AAC0001FF1F3C6F82AB0CDEBFA3A70765850CFA2
-:10AAD000D70A7D53F9E31DCA073AB83BBC2AC19790
-:10AAE000B36B9B82F916784EFA06FA33ACB3CAD927
-:10AAF000C5F34CB5F07C814EBFC87524D033BFC0C0
-:10AB0000F5D84F761DE67A26CAF3CB02DE787A1E98
-:10AB1000F2FA68FEC96066E9BE253C14E3D0A3459D
-:10AB2000C9349E94FB78393DE4E5FE58CED61D8AA3
-:10AB3000C94E7978F2CB247CB2DFD89C09AF213C96
-:10AB400063A674111EEAB76AB49E4996E0E0253AFE
-:10AB500079F8AD909B5767FF91CEDBD9F08BB78822
-:10AB60001FEBDB151E0FB4BF6599857626FC131508
-:10AB7000F74DA671D3CE368AF3A8A675723D5CDF79
-:10AB8000B95B9B678FF169E167AFD23956F51D4913
-:10AB90000CF75381FFFE80F48BE753891FA96707E9
-:10ABA000A227E823FEFD43D822F2D7A1C299A931FA
-:10ABB0003D6D167861767EFFA258578C7F42E77014
-:10ABC000FE989EB5915C147E56FE2AD699D6FB154A
-:10ABD0003ABFC359C5F1A9876B46C27D32AE273152
-:10ABE0004FCEF32ADD053375DF93F5E97BF1FE7F68
-:10ABF00022BDB9DD88F2FBAC08EDB7843F9E7E57DD
-:10AC0000E4703F36019F693909EC99B4F3858FEF01
-:10AC1000D1F07B20C93FD390EE3AFEC9CAB1D0B87B
-:10AC200059391AC1B3B192EF5F6D34733BB671A558
-:10AC300095EA425FBB9DD7A9A57ED312C5EB11D380
-:10AC4000DC3A7C7E2487C3D1665A45DFC7815C3AF3
-:10AC5000734623FFA431AE1FB93EDCF03CD76775C5
-:10AC6000617B04CFABA90BDD3A9FEA109C363FD63F
-:10AC7000EFB2D061CBACD4FE7CE5DB73D082F04F79
-:10AC8000EBE0F227E900FA94F84BCA83C46B0C9FFF
-:10AC900011833C497A98FBFC895021F797789C52A4
-:10ACA000CA54DA17AAB1068EE2778C35623F15EFE7
-:10ACB000639DABDC4F9D2BE8F2B83D3812D7D96FBE
-:10ACC0003FF52BFAD9B5CBDFA0B8E61ECFEB7495D4
-:10ACD000720BF1A041BE2708BA0FCBE1F67D6A0ED8
-:10ACE000E79BDA511D2497B51F36913CDBA770BD59
-:10ACF000663F69D4C78C3D24D6BB8EDE9B94D2318F
-:10AD000019F721273DA138304E1E08CE45F81D18F1
-:10AD1000C64B5B0FA5DD8DF8FD02BC75DD7742DF0C
-:10AD2000CC11E743EE048413BF3759BECC1FBFDC00
-:10AD3000782C7A5CA1F342042ECFEEAABAE623DC8B
-:10AD400037D899EEC7EFF3CFECBAE5BB1F01DC674C
-:10AD5000778CF7A39FE06C0E12FFF4BA6CFEED3C0B
-:10AD60001F3A05F33D2B3B0EA5E177459F3E3BA2E5
-:10AD70001CF5F61201E767CFABCB112FAB9EF9F9AB
-:10AD80000DF8BC36A264A1FF7A76E713FF9503E3C2
-:10AD9000D4EC68C413C858F3B3BFA4B8C014D9C660
-:10ADA000EFEF4C273FF7D327D7DF80F86EEE68A68A
-:10ADB000E79F3DB98DDAAF3EF3F357FE03F31FC1B2
-:10ADC00034FA3EFAB3E70F125DEA421AD5C50FC452
-:10ADD000D71B771FE4FA12ED3CCAC11CAEC7245F33
-:10ADE0004BFEFDF499BBAED1DB0D79BF4DE441DAEA
-:10ADF00092B91D3923E4B67682BD0DAF677E66A396
-:10AE0000733B1B2CDD25181FD79572BE5891C3F5D7
-:10AE1000605DC71273839DDEA771FE0DE41DAF5701
-:10AE2000037F62FD19F4DA7189EAA89EA3FED06F50
-:10AE30002CE6496657BFCFBF2B2D6D32D7129CCF62
-:10AE4000F2E7B06AFDF38A6589F735B6E4D80DF903
-:10AE5000D19CCE19793ED20349FE213AFF37A7266D
-:10AE6000D48C7502372D0BF9F13BFA173F797B3201
-:10AE7000E6D39E19AA8C24FAAB0AB773613BCD5373
-:10AE80008FFB0E107F3C2BE4C4ED60CE6B613D93D5
-:10AE900034E6B4E395B1E366D20B4FD1F8E0E79026
-:10AEA000FFE6FBE5ECA7D0EFD9680E7947E3386DF4
-:10AEB000C23EEEE0F0C3FB0E7B398DE7B896FBEBAC
-:10AEC0004BF1BDF32BA73BD1BF8771BBCCBA780C3C
-:10AED00038B200ED238E370AF134253C87EC94CF4D
-:10AEE00042EB93E781C2FA297F2AE5333E4F83FA8A
-:10AEF00009F3ADAFE7541ECE71C5AEEE01F21CD61C
-:10AF00005CFE7C4A6E80AE5FF57CD15767F7703B84
-:10AF1000FFD2FBC4B70DC8B7387FE843839D97F5D0
-:10AF2000111BF7BF4F7C3B7F1FD7C70DFB2A2D1886
-:10AF30006F9D5911601F80A3DB20F86FA3D2BD90D5
-:10AF4000BE4FDB6FA3EF0E7B247FB6BFFF31EA9FBE
-:10AF5000A27D5EAAE7E9D9CFF9F488C944798023B4
-:10AF6000DBAFDAD6ACF4B7ABE06F939C343431E1AD
-:10AF70006F2F7B1BFDB3FA1A5E07DF10C747858F63
-:10AF80009F6A457EC900EF18EB32C09F994CDF6D78
-:10AF9000D6B1D128A7391303FB7369FF9BC7E739E3
-:10AFA00035A04FA07D9373B11F4B073226825F8C73
-:10AFB000FCE7BCDE8FF9A68DF91DADE83F87273190
-:10AFC0003A7775A3B97D02C6C11B27F91C8049C019
-:10AFD000DB0EF2AFD9508BB067F3C92F6FF0FCAB2B
-:10AFE0009FF2C1F1F2BF7F25F9770DBE643F9E83CA
-:10AFF0003B6D9FB294FB337686F037007EB13D2DDA
-:10B00000725D04E13927F027F1D863EEA2F3787B73
-:10B010005E48A2F30DA74DE4FC9A31B183F4C76BEF
-:10B02000FB6F247B2DF932756F12D9ED4CCDA1F851
-:10B03000295F744B12C2334FC0D32EEA8433841D70
-:10B04000295EC7FDB8CC5C2E4F99B92671B518EBB7
-:10B05000AC1C61CA3B9C13F42736D19DFB543F3F87
-:10B060004AF254B78B8FE74C0A94DDABE35FE95F9C
-:10B07000C97A03AC1B989180BFC7E6723B58F8F8B9
-:10B0800052A2FBBC1A713EC43AEE5730E00BC41B0F
-:10B09000D091F8E026E722A2DBBC75CA37898EE1A1
-:10B0A0000ACA1B4AFF2C7EFC71627D3B6DC1515860
-:10B0B00067D8EB4AF5E37ED7CE8C8089F2EE65192E
-:10B0C00094077165717FD125FCC598DC07479960AD
-:10B0D0009E4FDCA99CDE91DF6898179E92EB4BE8AF
-:10B0E000E7F58FF3F978D3DBC3C331EE91F5611245
-:10B0F0001F9195C973F4FA7482A04B64189B837AEC
-:10B1000003E2093BE5AF1D300FE613B65FF724CF2E
-:10B1100027F073A1AFCAE5DF354FCA0A8EA2FDBF83
-:10B12000E2E0326E3FF93AE3F1F1BAB09BAFCEBE46
-:10B13000B30CE3D8865BED7E94BB0D2F297389AFEA
-:10B14000C3563C3C08F89ECB21384C540FC5421ADC
-:10B15000D1A3A1291849CCF73348CE1AC0EFC33880
-:10B16000601AF2B993F83EC2F99EDB3F996F403DF9
-:10B17000A9F7B7A53E907A06ED1BF2B3948B861B18
-:10B18000BA4B90BE5F55AFF498B99CF7001E508E35
-:10B19000A4DCA4BEC8E565CD4A5F253E5F0372AF5F
-:10B1A000A7777C7C867062BC22F5FBAA9CE0B77313
-:10B1B000114E53B495BE7D15FAB8E1C5D52589BEAB
-:10B1C0005F92FAD82ACED3B4465222FA7D06DCB377
-:10B1D0004F2DA76B18ED51CAF2C4F998D5B9D2BE5C
-:10B1E000F6AB775A9DEBEA5FEFE446DB85F2B33DC1
-:10B1F00085BEA393F9A9F871BF2FF84DD245C62992
-:10B20000B85F80FD9F12F2B359C8E973E2AA8B7F41
-:10B2100088FF7DA6D0FBB8DF3F901D93EFFDB3F212
-:10B2200065721E694FE3E92FF73B703D334A07EE25
-:10B23000D77E50C48171FCF882F0A7EECD65746DA5
-:10B2400037473F27B95A92CA689F6D330B64E17E36
-:10B25000D92B57707908F496E0F857E68732F24612
-:10B26000C7F2C2781FE3935A8D85719FAC76A739D8
-:10B27000A2FF8E67277E4809FDCFA75AC32AF0F99F
-:10B28000B8FCD061A4677802FF5E2FFC3D1BEDFF88
-:10B2900080233D1AF54B23EB4E433C37A85D2598A0
-:10B2A000C7DCE20EBD8EFD4F99BA0A78BD05DF9F5F
-:10B2B0003A29F2BE2745DEB7D312CDFF8E3376CEC4
-:10B2C000DD05C6EB752E749932310E7C6FDF3B3F86
-:10B2D0007B09DEBEE3A573777C1FB1B526E5CE1FE3
-:10B2E000C1B5DAAA06F5E7FF9C4C4DAC674F093EA5
-:10B2F000EAABA759999430EFBF278FF34163DCFE87
-:10B30000EF9E3C1FBFDFF75D16DFFF7D6F8073B2DE
-:10B3100026E771FA748A3A9FF8E7D3C43C3BCDAC78
-:10B320006433C2B32D95F6D799C6CF37AB79A4D085
-:10B330008FFB929D45FCFCFCDE4715B20327CD5CDC
-:10B34000FFC0DFADD68A981D453705FDC41A4738C2
-:10B350006A02FD51B32C358AE767C27D6D1CCA5A5B
-:10B36000D841F5A673857D9CD7F4DADF30EF51A381
-:10B3700031EB3878EFB47D7E1A9A8785DFBA178F64
-:10B38000C061D9D5EDA22E519CD71698AE5E4AF970
-:10B3900032BFCEF85DCBDEBCA015F9AC3A9DE3BB65
-:10B3A000FA5E7E4EAFECFF9290DB7EFC86BC0AF02C
-:10B3B000FE51E1F6257E1E77FE84E751BF2DF7048E
-:10B3C000B368FC7BCF19F45A8FD2FDF48F902F977E
-:10B3D000A48A73D45881BE5ECA9FC7ED4B2DEE3749
-:10B3E000816A3C5FD655B2BC10F9BFB7E077987759
-:10B3F0003B904475B1B5B8EFA4AB671B68DF69E05B
-:10B40000FD269F05F9BCE1A2427C32F7C06B2750B4
-:10B41000AF3768DDC43F73AD76A24FC3458D9EB391
-:10B4200036F359FD777AED9EC0705C5FF8C17119F3
-:10B43000B46F950DF709CF43E99C8FA5A21ED99D46
-:10B440001F1A8DFD36A5A4DD85F1E1052B3F97A9D7
-:10B45000D1C2EB8E99F8FE59F209CB4B35F2C1817E
-:10B46000D7FF8670CDB786E81CCB05739AE8DCDC85
-:10B47000EAF4E86847A99EFEE3BED6B9B95EA137F3
-:10B48000DEB3F0FA9CFEFCCFE9B0278FEBAFF7728A
-:10B49000B81CBD57C06AF6E0F54AB8C27BEF158903
-:10B4A00076396FC78FD328E4E8BDE1DC7E8597A6A7
-:10B4B000243C97E46E218F7BF302B723BEE4FDA703
-:10B4C000051CEEFC40759E8BF46348F06D3403C69A
-:10B4D000ABFE25FF1D03D6D24B75257DEB2A11F05F
-:10B4E000BA13C3D5121B77118E07FD02E4C7BF62E2
-:10B4F000A3EFEFD874D0D7A89F97E633D4CF306F9F
-:10B50000631E1F379A41FD92681DAC0DF436F0EFB3
-:10B51000F9D13EA2CB9A4AE0D351E25C7E5F8CAF78
-:10B52000243FC5F3D17D79CA40FBE2F7E17CF1FB12
-:10B53000E28C0D267A13BF7D8DEFD8466471BC80F6
-:10B54000DCB7E691FD8D5EAD973B8967A92FDF4B98
-:10B5500036F245AA80F307A25F1F9EC5395ACE6214
-:10B560006E0765BCF0B8E89F21E82FAFD2AEC5EFFB
-:10B570000F64887133F2D2245D1E13F4CE4848EF75
-:10B58000AD9CDED0EF09EC579DD47B6716D8B3DBBA
-:10B59000C04FC2732FE13D2FDEEF97B798C8ED7013
-:10B5A000E3D254867EC24FF244DE6F542FDFBF1BBE
-:10B5B000DA4BFA682E03BDA35C9E7E9823F0823E90
-:10B5C0007C43D40F2958CF93496AC087E301BE3B1F
-:10B5D000F35C317CC7CF77121F815FF84A9EF8BEBB
-:10B5E000AF8C9521BDEE7CEBCFA977F8F01C74FEF3
-:10B5F0005DF147F6D0AB38CED9EFBE4E71C0494BA6
-:10B60000B4A4DD9EE0B925FAF82625F6FCAE9FA885
-:10B6100061FCDD8BCEAEB38FCE06BE9CDBA5FA718E
-:10B62000CAB9F77DFEE618F4AFBBCCB40F05FEC572
-:10B630003A3C179435717FF4A4C948FF33DF36D6FE
-:10B6400075740B7995DF3B4B7D25FD86C5CCCFF519
-:10B6500054323F87FDD49245F4BDF37C163C8AE713
-:10B66000B07FBA742AF9D38B58887E8F605E9BF1C5
-:10B670003CDEF8737CE3CFEFC5043FE22FFE1CDF16
-:10B68000BE7C7B55623F23359FF3E1198BA82F18B1
-:10B69000C0CFB828F857D61734CAFA8297BFBCBEB5
-:10B6A000A031AEBE20E68FC8FA822F284F68CEF7B1
-:10B6B000D1F8389EBECEE0CC84C4702BF9D2EF49CD
-:10B6C000318C2FC789CD9346CF1BF13C9F84DFABD4
-:10B6D000DBE9FE998589E749CFE7EB6E8CAB67889C
-:10B6E000BDCFEB18649C2FF9A2F1A297ECB16CF7D7
-:10B6F000FD0E43DF7B79F43CFEFB7C99A79772F04B
-:10B7000081C2AC5ECA9BAD177AD13F1CFDDF0FD062
-:10B71000AF4239BCD1F74A378038EFFBD794684540
-:10B720003139895F07F0D367FAEFE087E48B7379EB
-:10B73000FDCC4FDF490A3EBFF3BB93D2719FF5DFCB
-:10B74000EFAB327CFFD6F77DBC45FA7376835D663E
-:10B7500071767BDEBED7C95F9B6F0DD277781FBD38
-:10B76000FC5DB2D70B59D08DFC7DFEE52B0A42FF64
-:10B77000037B2DE1B9257CB799FBE94EF233660ACC
-:10B78000786E39C0FD45933560A67902CCE77053D9
-:10B7900028CEE105A589E7F05DDF077F299DDF3130
-:10B7A0004EC0AFE0FB80DFEBC595CD0D79106E7913
-:10B7B000AE00709307AFCDD7F87D781DAF0435A6E6
-:10B7C000FBDE74326BCAC3FE266BB72ACE3BA3F3F3
-:10B7D000E39362F8A276AA68B7DC7AE1CE0578DF57
-:10B7E000CECF27B6083816E68BEFA8ADCC8AEB4E45
-:10B7F000B2473FA57D40710D4FE0FE77B888D7ED89
-:10B8000026E3790A30AFDD7E2E8C8B7530079D13D1
-:10B8100060735C88621CA2FB1D897BF25DBADF91BC
-:10B8200060519E9F1AE879DCEF4C640AF89A857E95
-:10B83000F3E27987C574AE03E9B7875317D239E4C9
-:10B840002EFB32DA9FDE923685F62FDD8878AC53F8
-:10B850009FA23B97019EBB82C6F318B2E718DBDEBE
-:10B8600090B16D6527A93E4A89063D97B262E74EC1
-:10B870009A85BEB83599C3756B328FD756E71BBF13
-:10B88000130DCADF7FC9E4E736F4B8AD56ACB7C0D4
-:10B89000F83F9FC7FF7F044A435CC87F1FA66C7CAC
-:10B8A00060C8A3A3F0774F54FF2AA0536BAA6FA5DB
-:10B8B00086FEDBEDE277C2B40EAA63D8766706D5C2
-:10B8C00089B6DA1C9598F70CE7F37C4FA3A8F70725
-:10B8D0008AD4EE82F7B6CDCCA57ECEAA5ECA97F604
-:10B8E000AE66E41FF5E3D32F80FF01DF4F621BCF6D
-:10B8F0009398EFEFC2EF88BD0195EA74E5F31DF868
-:10B900001CE054045FE0FDF115B1DF712A3E507672
-:10B9100008CFC36421C5CFD38F3EE2F759C22F6F42
-:10B920003C5079F36880ABB86B24B1F1E00362BF9F
-:10B93000C59924F68DF9F9BDF1FD07637F68A71C51
-:10B94000F3FD6B1D3E32419C8DEF4D48A1751F17D5
-:10B95000F92626F4C39838F9BB2E260FF4BC4CB454
-:10B960001B457D1D9E6111A8E0E90CEAE7E4F2E1C8
-:10B9700067F28FCBEDB52CF687E354C5C6253D3570
-:10B9800031F6382687B0C472ABBFB90EFA1D99C123
-:10B99000F7D7C768D18328EFD7896B99B8B2B9EDCB
-:10B9A00084DF352B032AA3128890BA1EDA63AD5DBB
-:10B9B00059C8DFE3ACDD2B5D30CE3573EEF660BBEE
-:10B9C000A4A098F80DFC2F3A7728C36E8AF0EF28D0
-:10B9D000CBFC2847B3E7F07CECAC3956AA3B9EA5DC
-:10B9E000F1F3A198162ABC0D9EDF56CDF3C0D8AE58
-:10B9F000D6E559E4BEC7718853762788374B0AB815
-:10BA00005D94EF378AFA1FF9BC080F8AC63C59C10A
-:10BA1000E48FF2C99EF0FDDD3352CF0C6543E37E27
-:10BA20006FE67C3EEE5F56BE31909E303E177A62E6
-:10BA300056E01133F9E9425F48BD1C14754D5DE2D3
-:10BA40005C97772770BCBF5DB998F4C5ADAC89F43D
-:10BA5000F96D2C6C467CF7E9FF293ABF06E699158B
-:10BA600034FA39B3E7C4FB3D9C5FE5BCB7878CCFA4
-:10BA7000674AFF758AD17FADFECE17196417B39F51
-:10BA8000AEBF342856BFD41857BFD420EA971AF750
-:10BA90002D39E2D2D52F351EE0F54B0DFB2E57BFC9
-:10BAA000D44BFB48C7CD9183B8BF727C318804C0AA
-:10BAB0007948D4BB1CC67A97F2185FA6CEE47956B3
-:10BAC000605FDA2FC973A4F8D15F6F3395535EB608
-:10BAD0002D2DD5AFCF83AE59199AA4CFC7CA7AA559
-:10BAE000E303C4B7C30BB8FFBA51E179F1F0ED56E7
-:10BAF0008AE75CC541C33E844B652730BFF811FA25
-:10BB000059A3A93FE53D701F6F245C230AAFB3EF33
-:10BB10007B1FBF3BC27C649C3E7265F9691FC09568
-:10BB20007E35E5F3E71C28DB41FAC66EF3E3EF222E
-:10BB3000CAF1E784B6695847D478609B36DF1EE3C4
-:10BB4000BBCA02C1AF292C05F9B52FBFB72789F2AF
-:10BB50007B1FD983930AE0FD3A4B743833F233DD0F
-:10BB60001FC8AE2D12FC629E10BC7D01C073FE4D3D
-:10BB70000BCF73DDC7485E9FDF9F41F9496D2623D8
-:10BB8000FBD252C9F8EFC06CE3DF0B9CCEE0E718A4
-:10BB9000B5CC6064077B322713FD16B3C8513CA7B0
-:10BBA000A866ABD9701ED13D3B8CED3AD641F6A6C6
-:10BBB0006E573F7E26BD25F5633DF3A966DC07E899
-:10BBC00034BECF061BF56399B00723674D6CC67A68
-:10BBD0008D91A6A04AF6F73E7FEE4C8A9FABB91D29
-:10BBE000654FD3F957E7533F51B99C737D3C3AA653
-:10BBF000350D7669B4F0AF6ED0F8EF2A487F69B49E
-:10BC0000F89D85C3A6032AFD768F806794784FFA46
-:10BC100069525FF7D1732CE852E0FB07255D8B5822
-:10BC200011D215C627795030C0C9A4F1E9F71AAE70
-:10BC300013F301DDF9F977266B04F9A85569223D64
-:10BC40006D65425F2BA1667CF917E130E9ED6B5819
-:10BC5000D32DF87B9FE3AC5D29E497DA436B0B5C53
-:10BC6000313E6966D182DD8A815FE8F9D98C37126D
-:10BC7000F28BB42BD177B9BF318D811F08F3067ECB
-:10BC8000CFFDA0C30A8FF3C01F3C8C71DE1BA6A999
-:10BC9000C40F536119D86F92C348E71B3DC6F654D1
-:10BCA0005F3F3E50F5BF5F0112A7213CD3861AFBD0
-:10BCB00005A47E6346FD56C8BEE075E5AB8F7E0BDE
-:10BCC000E3FF94E56C28FA31E039FA13FD1EE973BD
-:10BCD0000503EE933C5790609FE4BCC8F75ECBBA77
-:10BCE00017EE52FAF34DCF91E5AA47C75F929F5FD7
-:10BCF000147515CA2FC57EEC289EF78BD979CE37DF
-:10BD000015A2752DF25D267E7F22F845FCBEC8F592
-:10BD1000FB6C51FCFD9C3231CEB5C83FE531BB1EFA
-:10BD200035D97D9622E4137F9BAAF6F7E7DD993E8D
-:10BD3000E297912669E7FD598CEC7C47B386F0EFDA
-:10BD40001F931BB21BF8E31DAE4F803F282FD5CFAA
-:10BD50003E1A9FC7F18FA4E331E147DFC87C144747
-:10BD60004C117E74B490F34F95FD560DDF7FAD8876
-:10BD7000E70926E206227DEF69B48B5556231FC4DE
-:10BD8000F317CC68D2CF1BCF6F03F1CD20E41B6932
-:10BD900017B32ECF379F0B3F2301DF7C5E307A60D5
-:10BDA000BE89E717A95776DB1C5578A670638D42CC
-:10BDB000FA78E49B839BB17D457D21D5BDECCEF027
-:10BDC0001FA2E74DFCF9A8AE808A7531C5CBC4F33C
-:10BDD000C26015B61B97F37D89D1C779DDCCE0FB36
-:10BDE000F8F3B2554D87F0BBB8C6307FFFC54F5B47
-:10BDF000E97BA148AB78BFB2BD0ADB8D6DFCFDD3FA
-:10BE0000B8BF3402EBDD22CD787FD8BA423F0F4B6A
-:10BE1000B95F3B5EF0E96E65CF217AAF9DBFB7E8B1
-:10BE2000A835997E6750F8AD3788758EDFCAD7E997
-:10BE3000FCE026FADDD105BD61F29F3E36D5559076
-:10BE4000DE1920FEAC54DAF3F07A23EA1315E90781
-:10BE50007C5DC4F71FB7C314658378FE42EEDB61D7
-:10BE60001D81BE6EA06C10B7FBB29F3B937FD7C500
-:10BE70001E4BA5BCAFDC578C6E620ACA19AE51F8D6
-:10BE80000109F7196F2C6EA2FDC51B07C9FDC56E10
-:10BE90000DCF752FBBF4E7C989F22B63C5BC9F8812
-:10BEA000BA0879BF265248BF23B61B9984BEC77E05
-:10BEB000F237D416E79433F11DD8EE42DE9E3CE80B
-:10BEC000891FB6E5017E4D4D1A9EEBC60A14FA0E87
-:10BED000EE5FBA58343DAD3FFC376A2C6AE1DFB102
-:10BEE00011FC0B9B2DDBF9F7885C2FCD926A67DC88
-:10BEF0001092D35B059D6E1924F29223D948D43752
-:10BF0000B304DD6EB382DF4A7AADDD1C27FFB307D1
-:10BF1000A1FDD832A0FF6C7C1EA71F6AC4BC0B8594
-:10BF2000DFBC187FAF54C5F3E6B9FFFCC916EE3786
-:10BF3000DFC33A288F78FE31EE2FD6C3F2905FFA36
-:10BF4000FDAED74E63BBBE23FE7764F9EF10F6FB60
-:10BF50009DD6529E9F3DBFA5BE02F373359BDFA4C5
-:10BF60003C708DD41711A3BE000783EB8B4D575245
-:10BF70005EC764E5BFA33912F405D6978CC4BA51E5
-:10BF8000187FB838876735BEC2CFDFF9EE20B237E9
-:10BF900053A8AE94C653693FF7CD802F461F69372B
-:10BFA000E2F54599CCD70CCEA47C96D41F658CDBEA
-:10BFB0008B78FFE811494F11F7483FA30CFD0CE0C7
-:10BFC0008F2E933D6232E9FD8A08C921C48DD36C5E
-:10BFD00045C83ADC9F1A79FB28ABA03F8BA3EF261C
-:10BFE000A2EFC0F193F1791CFD65FC5221E87F3B83
-:10BFF0000B505CB457D0FFED77F9EFBDCDB22F23D6
-:10C00000FE7BF7F7DCDF94F1D3D78F9B02EA3F1278
-:10C0100037F5D1DB067E640AFE1EC6D4218FE27E90
-:10C0200078A78DFFAEB5C2E9EBBEFD78813EAFF8D3
-:10C0300036FE7E8BEE77259AA72659711FB0D9CC94
-:10C04000E38A99D3DEAB98ABD31B8559952F0D1A94
-:10C050008DF4E8FAF61F30CE785D9CE37AC045F4A3
-:10C06000BED0C5EF5FD87A953F0CB7CF98C579465B
-:10C070004AD3422C8192702C14BFF7F259CA2BB4C8
-:10C080007F3C2323740CE970CF1B7B295F59C7BA0F
-:10C09000F8EF028B7107CE4B86497F595EE5F6B00B
-:10C0A0005749F6F3EF86C325FAFDA4633EAE67C792
-:10C0B000E5078FE33CD2DEC5D7159C5C72237DD7A4
-:10C0C000F9171648C7FD4C45E3BFDF1C3F2FD611BB
-:10C0D000B4E8F2D9276D89BF333D3588E7038A106C
-:10C0E000475807911BF800F1F78988033F11FB5A65
-:10C0F0009FA4F17DAE9EBEFEFCAAF9847E16FB6075
-:10C100009F641AE347D9CF22AE1FAEB0065B74F42A
-:10C11000F46D4A6A8A501D95A81B59C678BCB43F75
-:10C12000C3700E4186AFB2C887FB14C5010BFEBEBB
-:10C1300077EF7E6E8771FF19F7872339A12F10EEF5
-:10C14000061F0BE0FE2AF3755B6EC17D46F17DEBA9
-:10C1500079C12FE76DFC2AE1FA6FC3AFB72E0080DB
-:10C16000000000001F8B080000000000000BD57DC0
-:10C17000097854D5D9F0B9732733133213261B84A9
-:10C180002D4E16B2906DB261D8270920B860C25208
-:10C1900051B661DFB209D88FB6F6CF601090475B19
-:10C1A000A8B6C5CFE51910A8562C1183460D1A94D0
-:10C1B00022585B4704454B75A4CA222189602DF69D
-:10C1C000A3E57FDFF79C93997B3361FBD5E7FFC83D
-:10C1D000F37072EE3DF72CEF79F7F3BE27518E8A9C
-:10C1E00024471C63ED77FB4D4C652C4AD62BA09E53
-:10C1F0008CF5F2244711D4A7C8F7A2FE10AFC33FB5
-:10C2000003EBC5D81CFCCD01A5C5DAA2E6C0EFEB57
-:10C21000C25AFDE9F49E5D4A624C51998745432517
-:10C220009D39CA6DF874B8FD442614E1F01EFAA9D0
-:10C230003159D729B9D4BCDC02FDCD10FDB1FE3691
-:10C2400023F63F9D77C566341FFC5689646CA6852E
-:10C25000ADE907EF6735F736C10CD8A2484FAA3DC4
-:10C260000B5B8CB69F8071154F847A2902FAC67FCA
-:10C27000A3BA968C19D909393F5A8787315CF700E0
-:10C280001FAD6B7D4947C27F1732D6B1C76CDF0245
-:10C29000E35435BF7554817555C9F5356AD797EBA9
-:10C2A00050E87BC62CDECF2D8CDDCE14D613FA6978
-:10C2B000B2BA73115E55163FCD137A349567C368D1
-:10C2C0006B8747D1FA7BC3F7309F17EB5CECEF61CC
-:10C2D00001782EB3F3F58F512BCB4CB18C9D9BC7BE
-:10C2E000EC6678B4ECE0DC7A0BD4973DC0EC7C745F
-:10C2F00097810D86FE05BCBA9B5F5CB981392CA283
-:10C300008EC34EEDC11CE9817A1F77B4A60EFD32B3
-:10C310009CC752D16FBF457D35DF0FA84DD2B4BF4A
-:10C3200061E520CDFB444FBEA69EBC6EA8A6FDC015
-:10C330000DA59A7ADAA69B35EDF358524F06F0AF69
-:10C3400039A0322F8036C33B51F33EF3E9BB34DFD3
-:10C350009F64B5BF190EED1AC3237318E0517D78A1
-:10C36000E4162C99C7E5CB02F8CC13EBC86E98A362
-:10C37000E9E74CE4D803B8AFF37C0B6E658057B99E
-:10C380004D4B34FD2E552BF9BE6D083BEE87EF6A01
-:10C39000E107E199CF3AF6F783F9557B15670BBCB6
-:10C3A0005EB889BF97DF2D6EDA4CDF2DF66A9F2FBE
-:10C3B0007D5A5BF794B2F45A2B63CB1DB658C287F3
-:10C3C000BEACEFA520BA0AE0013482F1CE3DAE7AD0
-:10C3D000CD89089FD4DF0E27F88431AFA3EB7E9D73
-:10C3E00063CCD982ED77D89C1EA82F3C3897E663A2
-:10C3F0008ED7E241B8438B0711E95A3CB039B5FBFF
-:10C40000DEB358BBEF7AF846B9065D16BE31E3B429
-:10C410007821E15A0C3FDF255C9FD0C1B3609FAB10
-:10C42000DE4A7062932D83117E7CBE6656AE229FDB
-:10C4300063B1C067E0B99377C1CEDAAD1E03E0CF38
-:10C44000730EC578C212E827CFD8B217D7B346F11A
-:10C4500030FC2E9C79E3915FD417B724B4C0BEE4BE
-:10C460005B6A71E7D817D6F2E791EE2B4D2D39F8BC
-:10C470005EF6F785D54DCF5B95771630582F33B6DE
-:10C48000E4103FB4301A5FC271700F8EC74B593938
-:10C49000F1E117053E7FFED12282E30256BBDF05A4
-:10C4A000E39DF998C37731F350BBF91BB470E802F0
-:10C4B0003F1DDC006D1C386E8D58F712C6BC86E43B
-:10C4C000AEF0549A95165B0E82A159F26DF7A50253
-:10C4D0008E7608CFA1ACF31FF16F095F68A004F35B
-:10C4E000271CCFDE2B309E84A7E45B721C33AB5538
-:10C4F000E3910E747C8CA56BF709368E617DB0A834
-:10C50000BD023CD4122D06EB85FDE0E419BB518C35
-:10C51000C3E6B8E3114E16B681F66FBDE25CA7C262
-:10C5200038EA0D89F50CE0596077A9B85F45CC373A
-:10C530000D9F175B1AEA8DD0D50DECA2FD04C81330
-:10C54000D67B7BD5A598C03A14B92E8FC28C501FCC
-:10C5500021EA933C8AFFB1445CCF5BDFE2B823441D
-:10C5600039094BD83F58E6DFFF0A1F0F571C0370ED
-:10C57000BC89AFA4C521DEAC516A996E7E475F8548
-:10C580007E5443470CB61BC3DC462E77BD3849F6B4
-:10C5900096E2A779FF88B9EEC752CAB76AD6307655
-:10C5A0001AD4AB1B416E456219DEA242C99A74F0DF
-:10C5B00064C6E35837C04A10BF97625DEE7B62E005
-:10C5C0003DD5D5AEF555B0863ED15796EF1B13ED50
-:10C5D000345F907FA9FC3DE76F8B04BC1649B9E539
-:10C5E000D5CEEF18FED287B13F9A0026F9484716FC
-:10C5F0008FA127A805894097D82E87E560FF40576F
-:10C600008E44E8BF5734D0A1124C77BCBD7CDF8587
-:10C61000EE74EB67B5B0B94300DEB642931B58EE3B
-:10C62000DCE0F55E053CA41E310FDB42F92F878369
-:10C63000D65DD5E3D8072E7C5DE84B40F92FF7A9EE
-:10C64000C6C4DC0DA8B734C4D1B8F2F9E84483D02D
-:10C6500027001FAF024EDDEF430AE943721FAE56BB
-:10C660001FCA451C2F0AC0EFE6AEF09E90181704B3
-:10C670004F06F0CCD6C05BFB5EC05BC2E36C916F33
-:10C680003BEE936A3BDC0BE1BC32BE7C12EECF800A
-:10C69000A3FE138A2130AF316AEBF6C7508E35A95D
-:10C6A0004EA4E5EA119CCF55BFAC12E9B7359BBD4E
-:10C6B0000AF4B3A8E94DD2CF5AEB809186750FA743
-:10C6C000CEF5EAE0DD151E7C1FE57A96EAD63FF34B
-:10C6D000BDF3B6190E5A67CD15E050130A0E677EEA
-:10C6E000CC669567E1FAB27AFAB302E366E1BE037B
-:10C6F0001C7E1E597E0FC2A3F0FDFE91089F316A79
-:10C70000F3FEBE0887158AD30CE38E32334F38EC24
-:10C71000739F9565ECEFB057C5FE5AA71DE011DF7A
-:10C72000DFEA54011E69F7A8E55EE8F76F2B96472C
-:10C73000CF85F2CB3A187A203C570CE5846F6CD742
-:10C74000273F85FED26CD39DEBA136C30CF38171DC
-:10C75000127F1CD1920C7CE27513B320BD8525D5C8
-:10C760001E1A0FFD7644A94ED4836355361AF14B39
-:10C77000C2393682AF433E2F7962ABE2B7069E8F55
-:10C78000AAEF285806654522DF77B9CE51651D0509
-:10C79000A8F74838C726F3F6CCD8913031883E72D6
-:10C7A000053C8EA15E07F0AC8E33AD4139D866E111
-:10C7B00075E64A27FD778585D3C7B1F0042FCAC730
-:10C7C00063B0561FF5D76263D620BE18EEEA792310
-:10C7D000AC9BBDA7B26D507C6D77F58C2278D87973
-:10C7E0003F42DF6A636C1CC269C5F8D2DED150C615
-:10C7F000D573F8E8F1A43191EBFD951780F00A02AA
-:10C80000CF2B8D2D26BB159F9B34CF8F03DC3CE6B1
-:10C81000407DCEA994B18CF88C730DB69FBB2E824F
-:10C820007982F4AB46318FEEE0521D656446804755
-:10C83000B5C2CA2FD7EED5FFA8045FFDFCFF2AF8CA
-:10C840004C5C59E8F51D12EB2B5B7BEB6F51FFAC99
-:10C85000F68531333C5AF172496F16A2BF4E385FEC
-:10C8600018C6BC314175A39FE0517D61243D2F5B0B
-:10C87000DB6A42BCC77E1CF07C45B8ABB7F33270B4
-:10C88000CEC579E07A2F44314F4CF0738E5781FE3C
-:10C8900063E9FDEF118080B79E26D5BB0D3EFDFDFF
-:10C8A00001C3B82DA1E62BD63F28CE48F492D9C2B9
-:10C8B0005C9B438C2FDBF58A067E6DE570AEC8EE7F
-:10C8C0003ABFC652FF4C9CFF8DA3992BD478E74406
-:10C8D0003B39EFC668FF0281F7A915B6A0BA5DBB68
-:10C8E0008F3DC5F88D37FB13B0FFB6F16C6A4388F6
-:10C8F000FEE57ECF88776722DFA9BC031A037E0C92
-:10C9000036D62AF6207AEB6EBF037006BBABE07218
-:10C910007036D17BD9DFE943821E99CBAA001DCDA9
-:10C9200016F26AF6D6A5B702CFECB45F4E6F02FBE3
-:10C93000058638CD6ADFB4617D8342F6C91C37C8ED
-:10C9400000E0370BB615AC41B1353B9EB191D1FC3F
-:10C95000F9BD58AE0E0BC859FADFC582E5A21C7F9F
-:10C96000DE835ABD75117BF02BD47B4E1FE27C0118
-:10C97000D453B2BF173CA2ED6FD1D65B4EE23C1749
-:10C98000E9F49F3454F040FF484B12F6C460361867
-:10C99000F9FFB26DE74D918EEEF1FF4BA0F394815C
-:10C9A000C827ED540E4D72E524A17FE13D3ECFF145
-:10C9B00049EEFC24F4A3BCC7E775AEF21C970F8FB9
-:10C9C000C7925C322313875FCDD32CDE7A98C75A87
-:10C9D0006023E1001FB399EB4152FF53D5E56A2470
-:10C9E000BC1FF2C58A6837F2E1676F1A87FDC53D43
-:10C9F0001BE1C2F5AC2F71E5A1BF607D85D5590F54
-:10CA00005D5AE07B941BDEDF0F79A32F6A070D1BB5
-:10CA10004BFB21BA35EF6D417FCA3AC357FBFB414F
-:10CA2000FB752399B39E05C6A969AE781EE79330BE
-:10CA300099CB97F589AE3C7B50BF4CE873D5027615
-:10CA4000ED7BD27E390CF6F7B103A44EC3FAC09E3B
-:10CA500087F90D627C9FD9458013E0098E1DACB724
-:10CA6000B6829C626981FAA006A5250CD653D5F83A
-:10CA7000BC01E560E57D2DBDA6A13C7AC6E8DC12CF
-:10CA800034BFD8D7FB943A220372689A62273D419B
-:10CA9000EAE57732F92F8BF066AAC09B3B853E3ED4
-:10CAA0002D82C3770E7326E077775958A401486921
-:10CAB0005A594311C9A9A5615128FF712DA1F65BEF
-:10CAC00096DDF995AAB7DB3C0AEC7B9BD2918A9D57
-:10CAD0007C89BE1EEE5FF26E49ECDA4F5D92A0C318
-:10CAE00054A11FA630970DD65DFD5ADAE6F5F0CABF
-:10CAF000DC03F6319FF891A5389FF4630BDA3D8B88
-:10CB00005F0D6F512203706176579E01BEAB99D8BD
-:10CB10003F7F3DEAA44781AF0081B585F913888E38
-:10CB200081DF2820F336258DAD3002DE55F705FD77
-:10CB30000BEAFBB74CAA3002DE5727F91718A0DE24
-:10CB40009654C5EB83FC27B07E216925AFE7FB1720
-:10CB5000A8508F495EC3EB6808026239921FAAF0A1
-:10CB600040FF5F4609B9EEF4CF44FCA97E25CDB065
-:10CB70003E68BDD664CEAFBE0CE7EDBE4C64B326B6
-:10CB800022BCD3FDA9384FD9AE2349EAC31BA8BDA7
-:10CB90005CA7FC8EC587EEFF7749BCFFC565421FC9
-:10CBA0008960EB106EB04D9E4880FFBEE6B42DD874
-:10CBB000FEC1A468DEBF1DFA290CF423E128FB9313
-:10CBC000E32E41798B7C380CF870101F6D4CE2F22B
-:10CBD00012C6594DE3A400FCB1BF89FDF370DF60BC
-:10CBE000BF8C62BF8CDC4EDD4CEDB1DFA81CE2FBDC
-:10CBF000054658C7BE8BD03E31306F3D7EEC15F8F0
-:10CC0000B1B81E1821E967C98447A322B85EC80AD3
-:10CC1000B5EB8849E6F0B32647F17576EE476F85A8
-:10CC2000C6A91770EC0F70CFBEF675BF2FE6F35D87
-:10CC3000AF3B68BF5C2ABE6FCAD812BC1EB02C3591
-:10CC4000FD7CB94AF75D311020AE333A99BE5B1BCB
-:10CC5000CE2CF49C6DE9FC2E3187EBA3A8A75609D6
-:10CC60007D9A79469253A152708DAA753E9303DF47
-:10CC700037282EAF35787DB7168AF5D9C5FAEC7C02
-:10CC80007D5E0D9EB2C31D09936D5DF1B713EE9DE0
-:10CC9000FD65E58BFE34741DAA3FA48FEEF6232CB0
-:10CCA000F93BDE0F394F1D3C3BE1AC9B9F8427D203
-:10CCB000337D97A5C54739CF0B823EBBD075E27552
-:10CCC0008E57C2BFABFA09EC23EA270E2D3E57352B
-:10CCD000261AE66405BE6BC2BD2C0AF8E7D293851E
-:10CCE0009DD79FF547FEED29E57E54CF2EB3B3DEE9
-:10CCF000417EBDACE4B8907E3D7AAEB7F3DAA34C8A
-:10CD00004C21BD48EB67688F73FA5CA89F9E65CE87
-:10CD10006DD0EF309DDED10EFBB9CB1AF82E204F2F
-:10CD2000B4F59F083AE8EA37EA48C0F9159A4B5F2C
-:10CD30007038191B9BFC14F1F7C29EA5CB13A17E82
-:10CD40004BF236E2D785FD4ACFA36BE6B6E4EDBCE5
-:10CD50009E597A3E09EB4F6DE7ED47B95E40FECE36
-:10CD60003CDB2B460F09E80F13921D5CFF28333084
-:10CD7000C423B37AB713E5A484677765A1D9501BA0
-:10CD80004A6FBDA3939EF97946B190CFC5D28EF775
-:10CD90001B35767C7BA4C5A3025CDB519EC27AE77F
-:10CDA00024BBA723FC6B225A67A20A7C5FC42726F8
-:10CDB000D4871417E81BE81771D8D97498A7D2BA8A
-:10CDC000BE9CF4C0254E8B91E029FC54B0F64BD0AC
-:10CDD000CFABAF3DF3B37E7C98729CC71041FF355B
-:10CDE000AF7DFBCD5F518E7E6975A21B7048F3A3AA
-:10CDF000CB51BF1AD2FCA76FB9BCB5D239959CF7FD
-:10CE000010F437C2F3E22633CD7F4873C67C6C3F03
-:10CE1000ECFDE664C48F11C75AEA911DB4EF79A9FD
-:10CE20009F3BF8DC8A9D542E655EBB7ED1098F2F17
-:10CE30004C0CF54B80C7FFE1F0B8B800FD8A6D716E
-:10CE400087D6F8494FEBCFFD98E27BD0CBD391CE7C
-:10CE5000CFB11E4E3C5768B7F17EF4FECDA315B09E
-:10CE60003E783EA2036610A4378FBA60010612A86E
-:10CE700097B0284DBDCCD247D37E8C3D51F3FEA652
-:10CE8000F80CCDFBF18E3C4DFD96F4219AF6B739A6
-:10CE90004B34F5DB8BC76BDA57B82A34F5BC9606F2
-:10CEA0004DFB82034DDAF7871DB40F05C7CACB507F
-:10CEB0009F77FADCF558DED8BAA1ACA78375F1EB01
-:10CEC00016FABDF5F87CD8C5DAA216D6D5BFCB9632
-:10CED000B8E93CC08CFBA2069D0F94F8881EDB0CC1
-:10CEE0004E47B01FF7D15EEE17709FDE5200EC0088
-:10CEF000EC91968E18DCAF31B31E5223715F3A1855
-:10CF0000F9BD1A4DFE5F0C43393F4325BDB7D1C86B
-:10CF1000487F6C9C9AED45DFDF51C5FFE25F914F82
-:10CF2000CD88207E3202345C5A379E812AB84F6EFB
-:10CF3000CDBA4BD862DD3EDDADA98FB1FF44D3FE43
-:10CF4000A6F8559AF7E31D0FE8F669A3A67E9BF3B2
-:10CF500051DD3E6DD6EDD3339AF7233EF7D7231933
-:10CF60008D6AF5A83698FFD0A31BCA705F861DF3A3
-:10CF7000CC407A296C71D7130BD957FB26962D60BC
-:10CF800057A13FEB8DBA782AF7D539C81FB5BF2E08
-:10CF90009DCA03754E7AFE765D3195EFD4B9A8FC33
-:10CFA0004BDD382A7D75E55436D43550FB5D754D23
-:10CFB00054020407A0BC888D11F207EA68E7B7198C
-:10CFC000FCD578E27AFAA96F884FB6F5F0B761FD23
-:10CFD0003EF68F8AD1503F9CC288BF59A14FA4C74B
-:10CFE0007329AECA14A85F48E6CFDBC3ACEB500E82
-:10CFF00034185C79A85FFFFBA9FF6C340E60ECFE6F
-:10D0000055E5F1F6285EB7409D361B0D33CF7F36D0
-:10D01000BA8633F61C8A8CA154AFC07A7B387F7FE6
-:10D02000E1A9FF907E2DCF9B2707CE9BFF9D1CE2A1
-:10D03000BCF9B9530E1BFA590E5D4CB3E1BA0E0997
-:10D04000BF928BE585CD86B2C498178672F1A84E43
-:10D050008F90E5A7D612534A1CCEDF3905F508CFCD
-:10D06000CD616C1BF08B890AB7473BF5C0142ECFFE
-:10D07000DB6F3393BD73D8E09A8F780E7CFA4984C6
-:10D0800057424ACF892857DA6D1D090887FE299132
-:10D09000BC1ED7F1A4E20CAA87F175C6A5D82676E6
-:10D0A000B3CEBE381FFD3A6F4811E70C2DAE0128F4
-:10D0B0007F65FD7085AB0AE5C4E112D7409CCFA126
-:10D0C0007233D18FA7DCE61D884CCEE82A9A12E491
-:10D0D0006F7934258CBE9B6CE274C6EE52BDDB4288
-:10D0E000D8692FA5707D9FF60DEDB93B23480F3F02
-:10D0F0006C608B768580E3BB295CCE9DE911DAFFFD
-:10D10000E213F02B9D64A3FEDA5784D3796F7B7909
-:10D110001AE941EDB50025A08FF653B56777D37BAB
-:10D12000B33C0AA373CD69824F3DD7BCFC1F47A017
-:10D13000FD272B229CC4C3ED83483EDD251ACF88F2
-:10D14000B190DE3263E28052944BD3C4F9D84C9B49
-:10D15000B1171D9319A34C76E8679E356F0D8AFFB2
-:10D1600005B115A628A82FEA7FF71A2C97A46C34CE
-:10D1700045435999F5FC1A541FAB80B48AC85EF236
-:10D18000FFB90EE6356BA5EAE0F693906BAEA5D736
-:10D19000148F21F110E188780AF025BBF03D016F72
-:10D1A000F9DD7B029EB352C4396D36CBBEA43DF788
-:10D1B000998B78D23AE3CFA9DDF8E7B5EF85DEF6B3
-:10D1C00081898FBBF4E9306FB03F498E7B48CCE357
-:10D1D000B089B914D4E3EEB2117EE44C3D7F5F1107
-:10D1E000AC3FA7D96EA0737BC9C77D8CFCF6459F69
-:10D1F000BB89CFDDD8EADF7E84119E37219D5C4953
-:10D200004E4DF2AC22F930E46B903FC8172FBA3F75
-:10D2100039427C7091E083B5C4BFF6D5ADA4FAFE67
-:10D220003A0F9507EAD6093EB881DEBF53B749F0F9
-:10D2300041AFE0834FD3F3E6BAA954BE56E7167C5C
-:10D24000909FAB4E14F8B432DEBD0EF9993CBF9CF2
-:10D250006C718721BCFEF8A899A9782ED16C263C68
-:10D26000050A78F2B1588C9731DBD73BBAC6CDE8C6
-:10D27000F96DE7FEEBCE7937C4BB1EC1F13AE3642A
-:10D28000503FBBA17BFC39C41C36E4273BB64E247F
-:10D29000FE71C8E1B0A1DEFA5CCAA489C8AF0FB9BB
-:10D2A0001CB630A8FF61EB24FEDEEDB099A1BE33C1
-:10D2B00065327FEF71D8C2A1DEB055D4BD8C0EB5FA
-:10D2C000776FBD93F84F0953F6213D9459124703E8
-:10D2D000BB06F958B20FE9E0A6F8D9A3910E525255
-:10D2E0001C840FE31DABF661FD96F4CDC618077ADA
-:10D2F00043F356E377A5B11546FC6E74FFBB57E3C5
-:10D30000776353361A83BF1B97F5FC6AACDFEADC00
-:10D310006C447D3005F9565CA01F5997EF257F4579
-:10D320003B01F134B7B99CF8784E5339F171099744
-:10D33000D2C915F7A39FAEA649B12B388FC94AE7CA
-:10D3400061BD023A44F545A016E0B3FBB6CE8B5E54
-:10D3500005DFD5607D28D57FB52A34DF3D981242A0
-:10D36000BE7C28E814E566057CF721D0CF2EA8679F
-:10D37000E0FAC87F38DB369BFA73DB50BEE6A67056
-:10D38000395920E4E65C512E12CF3FB5BADE47BAD8
-:10D39000FC3845D8635DE9FA1341B70BF83CBAD0C5
-:10D3A000B5F6BDA06BBF940F851D0958AF621BC8B1
-:10D3B0004F78A5F8AEC5C1F65B22C6493450FC854E
-:10D3C0003E4EA292F9787F0DBA380BE637D1796CD0
-:10D3D00053D073E247C2FEE8C1F9DE5464D6809FA1
-:10D3E000DF76CFCFFE8DF0BFCCBAB5EFC5BA17331D
-:10D3F0002FC5B5E9D7C1DC71445B4BAD87693FBB35
-:10D40000AEC71F7A3D5DD6C1ED7719C722FDF2A0E8
-:10D4100007D90616211FB431F4DF04F3892397E1FD
-:10D42000137A7EF45DF1B9CBF09BA48121F88D8C49
-:10D43000CFD297529F83BA07E3F33CAF85939FFE09
-:10D44000A4C39D8DFDB497767C6340FB2CD64F78AA
-:10D45000E6E9E776E273C5C4CFE9E1492AEEDB29C4
-:10D4600083E70FA8170DDFF624F19D36140E408FC9
-:10D47000855047BEE3ED5B3E18BF63E91C7FDA15BC
-:10D480002E1725DD833E48E588815C1E752D395DAC
-:10D49000C9B8C6F6CDDF26901FEB0AF8DE1D1CC604
-:10D4A000A8C3FD1EE4F7C511A4F2B42AAC4501FDE2
-:10D4B000AFB5A417E911AD034C462CBF6B3BB1755A
-:10D4C000402AF5AFB7175BFB145BF8B863C761D9A7
-:10D4D00064726F9A8D76D21033D949EF8A78C00979
-:10D4E000113C7EEA5D3C1F8676138E5F8C45F9A564
-:10D4F000B7375B0F4E2F75E474B53B619DA3719DEB
-:10D50000959F19EEC767D76A8756AEFC86196340A8
-:10D510006EAFBCC88C055763973215D945FE51E7ED
-:10D520009B58167DEE8BCE71A0FD29F507619F5E9D
-:10D53000210EA9B883EB0BA32EB2746321FA997A5A
-:10D54000D0F98D52FC276EB78A529E8B0CE7536040
-:10D55000330D56AF29491387146F8472BAEA1F8CB2
-:10D56000F536E6A37312BD3DFB96F043815DFB0BE0
-:10D57000C4DB35223E09762406F177CC4F3F9AF979
-:10D5800033E203E1A40F75DAB5BB0D145FD0687404
-:10D59000F51C8176EDCA81CE5550FFD417F7EB57B5
-:10D5A000A1ACB17F437093F45BB9F23CC153D65B3D
-:10D5B00085DF774318C81F282BFFA3921CAA646C31
-:10D5C0001DED1B7BC3B42C482EB286AF3AE19F0BF6
-:10D5D0007CAF02014876D6C8492E685721EC0FE689
-:10D5E000799DD785DD0516C52417F45B1127DAB3BD
-:10D5F00087F9FB01F2FD23FCFD40D9DFF989F4BE78
-:10D600008FAC8BFE3264FD4FBC9E28C76BE5F56C7A
-:10D61000590FE7FDD978FB9706364CF26405F8FD03
-:10D620009E81423EE6B13C1197B377E0E5E351B409
-:10D63000EF857C98F58CEA31E5E2FE8C8FF833D2E9
-:10D64000778342B17395F78691BFFB4C7443CEF25A
-:10D65000207B45C6AF9497D95CA8FF55BD98B645C9
-:10D6600015F13CA87FFCCBC1ED9831AA95CE27CE11
-:10D670003DC8F97E77FADB8295AF6AF6B3CB7B556E
-:10D68000E1F6381EDCC178671FEABD99EC8B141FE8
-:10D690009D9B7F2AF85D2FE0ADC5D18178B1D8641C
-:10D6A000E6427B35F625E0CFB8C79FFB881F2F7871
-:10D6B00089FB7FAB1E7D93E4DE1CD541FEDCB159B6
-:10D6C000EE2F106FDB6C3EF22B2E58F91ACDEB9B30
-:10D6D0000CA137D83BB282E179B62BFCBFBA02FC71
-:10D6E000BFFA21E1AFF73B2FB1EEA3F52EB9C6B8D3
-:10D6F000B6361B3F17758A7D3A6E700C16F08A4855
-:10D7000045FFF97C5F6A948A41C7BE5E3C5EE99D35
-:10D7100022B48BCED5DA18EEFBF4E57FCB7187F01F
-:10D72000FBEAED811938665C005E7D52851E14802F
-:10D73000EF001CEF32F0D5BEFF9EE1DBDBE83739AE
-:10D74000F11CF528A37E06FB8E9B82E36246A47241
-:10D75000BCECD9C4CF8DF4F15E23526DDCEF2DCE3D
-:10D7600067AA26BE331CCF67243D8C8A600DE86F04
-:10D7700007BC760ABC76225E4BFC0D9CD3C0772199
-:10D78000E82B80BF5AB88E4EED82B7E3AE00D7715A
-:10D790003F245C1B411FA673CDDDE1E44FD1C3796B
-:10D7A000A980AB84F7BD5780F3BDDF139CEF4D75A7
-:10D7B00068FC1112DEDDC927FDFEC87987A0D3A25F
-:10D7C000EBA1D34B69DC4E64463FC599EAF7BDBE79
-:10D7D0002B3DADBDC2BEAFFD21F75D0F377D592991
-:10D7E000CE3BF5CFB7A576CBEFBE1338FE6FF3A7D0
-:10D7F000CFA8DDAB793F6BE541CDFBD99EF734F582
-:10D80000E17E5F19A2B9F48F8F3CD5F126D6AFD750
-:10D81000CFDE9D7F7DC20B0B0D78FE56ECE3FEFD47
-:10D8200005E9EE7FA5029CDF3578EB6D00D71B8FF5
-:10D8300035A8741EE6CDA373C0E5628EE787FFF3BB
-:10D84000939F01DE9C6766F27FB6ECCD303AB2BBA7
-:10D85000E241C90595B982F4C4124B9411F5A9129D
-:10D86000D09443E1CD258137140F04F43ED5C2C2D4
-:10D870006281CEA74E5528FE692AE3F1D450B6B88E
-:10D88000E1FD04236B3143BDC26A6C31D3B91FCFB4
-:10D890007798C2A7C9CC46E6C1F72C3686ECE0C91A
-:10D8A000F810E6ABBA548A679B52CCCF0BEFB23676
-:10D8B00084A13CBDF3C07D677F06EFD96A4F118F0D
-:10D8C000D796F96B1F1BAEE51CF0522AA7F37645DD
-:10D8D0009C2B2B614E8C6FD57FF77E2AF7974E508D
-:10D8E00057A918FFD2F11E23BD5BD21DACEF8039C2
-:10D8F0009FE7670CC575B2B096B448D49F37966160
-:10D90000FBCAC30E824B4DF1AA1CDCC79AD1CA6771
-:10D91000E69C807D53B3F26BD2D3C7A83BEAB1FD3E
-:10D92000B9A3DC357E63AB47457B25E0BFF4CF442C
-:10D93000BABC921D24E77DACAE85F0E993BA0354DE
-:10D94000BE3BF24F45A867F8EB7C21FD97D7EB2F44
-:10D95000907E02E937907CE0D37BCB7A235E66A48D
-:10D96000093DD0A2F443BEC08CBC94FC3237AD8BD1
-:10D970005C2D48BBBC3EA87DFF3DF3D7ABC5F3CAC9
-:10D98000782E17F5F8ADC76B89CFF0599102E3DE19
-:10D9900005FA1ECAD569CC935D097C76EAC20D6191
-:10D9A000C394EBC7EB25D6CF1358883C956BE7E7BC
-:10D9B0000EDA47B54C25FB40C62BC87D5890D6459E
-:10D9C0002E2EB9C2BE2DF921F7ADAB5CFB7CE6F57E
-:10D9D000C935A6C9EBB8BF2BBE3E9076797D40FB1A
-:10D9E000FE7B5E7750FECC4CD510C817C178628C98
-:10D9F0006B6CF7F27CC845891B222938B3B8231217
-:10DA0000F5C6C57B54C243667419FB00BE2E14F8DC
-:10DA1000DACA5A3E407C5C387C21E5D12D7A3C74D0
-:10DA20005C71B568BFC4DA68C2752ED9AA6D572D6E
-:10DA3000E28A2B7768FDA2D5C36F3A89FD56EBE2E7
-:10DA40007976A689F8E17C96CFE32EB4FAA9BE6C6C
-:10DA5000AB631A7F65DBC53AF207BCF4BBD6873DE2
-:10DA6000FD83ECFFAE78BBF70AFBB7F787DC3F3DE1
-:10DA7000DEAAB6AD945775AD78FBD341AE0F70DE1C
-:10DA8000921F4F47DE04E34E7FD5ECF5E0F9689135
-:10DA900083FB37156F3D9EB7B57FCBC87F3447F802
-:10DAA00039BBCB4B97F106430E7BEB79BC814BC561
-:10DAB0003CD1C107CACBF0B8A2E09D5AD247BA3DCB
-:10DAC000B792F955227EE86AF99AF4EB0D3E554B70
-:10DAD0007A96D367277D68E8858637513E7E57FE64
-:10DAE0006E290F736338DC0AFDE5A4E7B585B5142C
-:10DAF0007D887AC2CBE121F5841EE95C4F98E499D8
-:10DB00001DC6F30DBB9C07F648C7F340C1FF0D16B9
-:10DB10005718C2698CDAFAEB3B107F7C2AF9F7566A
-:10DB2000FCFCFD3F3CE6B8B2DD5F633F4F7A4377D4
-:10DB3000FA7F8D81E75DE4973928CE0FED29F4EF68
-:10DB4000497F9FBE7DF1A0D2FEE971E4AFF6B970C6
-:10DB50003E9BF87CBADB9F9A955F69FC8BDD8D5FFD
-:10DB6000B3A7C83E27880E66A42B12CFED272C81C1
-:10DB7000FDBD5A3C18D13155A3FFFCFF6E574C50E8
-:10DB800041B504F999AD78B9FECAB81E3B9DF9A814
-:10DB90009CC93AA874331E7F3F8739A99C27F29805
-:10DBA000DFCE7057A4533C4C472F8A9F7CF17FB245
-:10DBB000106FCE8E1CB60163EDBE2F3DAE3DCF4142
-:10DBC000E3B7EFFE9F048C83B9125FD810EF9A97EA
-:10DBD0001EE23CE82F252A9DB7B0538F919CA810D8
-:10DBE000B730B0D1FC1CED5F8E44A29B005FECBD52
-:10DBF00059F2453C9FCDFECCC0E349162BDE81D0C7
-:10DC0000B4C96F20D2CA9E9FE855B1DEC8DF6757FE
-:10DC1000457915A8670F09E7EFEF8EF2A21F7D0681
-:10DC2000F3133DCE628CF8DD6CC6F9DE5CE6E2F9FA
-:10DC30000EAC2309F5B0F9CD161EEFCFFC29C8DFD5
-:10DC400073BAB17F5A049DE726717E9E5BAAF55395
-:10DC5000AC49E77CFC6446E967484F67D25D6BB12D
-:10DC6000CC8DF6AD7FB890FCF60CED8793437E42E9
-:10DC7000E78DF2BBC841A50F62BB9D0A8F4FF7EC41
-:10DC800031537C047CD1AB3C28AEFFED8CB25F619C
-:10DC9000BB4711F645DDC315BED3E4CD06E8C9C3C5
-:10DCA000E78F3617F9DFE141318D4BF5DF3F3D61FD
-:10DCB000F26A2BF9F83DA8F7460E723F85FB9A6B86
-:10DCC00062CC8AF37FC2ECDD42FA696D02FA2B174F
-:10DCD0003E6936A0DEF011885BCC43F96B9D85CAA6
-:10DCE000BF811D8CE5A7600763F919D8C158FE1DD7
-:10DCF000EC602CE75FC80361C1D8D80C5733C7EF7D
-:10DD0000D0F959BB053C3BC7DF63A2F14F66B809A8
-:10DD1000BE9DFBFD32F3E2A1CECEA88EBED197C14F
-:10DD2000B7EEF98C47D883A1E3B99E15F3C86934DF
-:10DD3000927CCF69F2472E086AF776BA89DE67EFE0
-:10DD4000FE9CF24FDBEC9DF07529B0E409065E7F86
-:10DD5000FBE979935767E1FC5D9FE1BA81BEFF82E1
-:10DD6000654ED3FBBFC2FC1FE89FE20EDA958EDF43
-:10DD7000901DA05B871E0E725D3BA37CEBF1FB9DAB
-:10DD8000BB937025C06F18A71BC42325D47A57D125
-:10DD90007C6F377714625ECBED97D49071C62733D2
-:10DDA0004A08CE3F97F826E124F6EB7AE9BAF3FC6D
-:10DDB0005BE02993F77720EF74A01CBA1889FA5E0C
-:10DDC0008538DF6F6A4C7917D7E739A0B2810EC268
-:10DDD0005F0DDDC566F0FD9165F61E5339EED3CEBD
-:10DDE0003D2752E659695F52E6437B63C6408DFF8B
-:10DDF000317BC8B7FFFD702CB5B7E35077B2CD6368
-:10DE000030FE649A65EF1F714933EC9F8DC1F89322
-:10DE100059F1CA7E2C673B12C762DC898C8F9F9BAD
-:10DE20005EB21F49E9566705E96925C85C82E4418D
-:10DE30009925020F053BEB63EC319AFA4DF1FD3465
-:10DE4000EDC73B9235EF6F49CFD4BC97E3DEEA2CA8
-:10DE5000D0B4CB8DEE4842FB0CD641F4C0B6A91429
-:10DE6000A797BDFBF0CD99509FB07D8A13D5929DA9
-:10DE7000E2FD845D655EDC8F7680A70914A853C53A
-:10DE80000FFCE661EC4CA7FF57EE796ABFCB710D32
-:10DE9000FA7F377ABFE4B34B9B2D45C867AFD60EE8
-:10DEA000D0EF4F7E86D62EE80E6F3AE9427170BCF5
-:10DEB00039A8B26D21F0062352391EF272C2219E9A
-:10DEC0003F76ADFCEC0BE4673101FAE82C757EB9C6
-:10DED0005C93F3DDE5E8A7FFB3CA281F4FE4F52DF7
-:10DEE000C0DFD500BEB3799BEFEF134BCF3DA8E762
-:10DEF000627EA90BFA5F9221F4A7CABDF7F7290C3D
-:10DF0000BC672B3ED3B467F72A6B34F5D589DAFAB0
-:10DF100083256B82BFEF8E2F2ED834DBE4A6FC4F17
-:10DF2000C5E50DC11FE47CC6BC114E717DB761BC57
-:10DF30000A3CAA2E7CCF88E7B0B775234725FFB9E6
-:10DF40005365B5A1DEDF93C1FDFCB7BE114E713044
-:10DF5000D7DAEF47004B8A337C89CBD18F7AFA8CA2
-:10DF6000C1FBEE11FD9F2DDAF8F36FF07CF46546EE
-:10DF7000719F67A338FFCF693C6930A01CECC1F1E9
-:10DF800025C7EE37A05C695F14E1C1B8FE9AC536BB
-:10DF90008A07CD4DEAF8C0025BBFEE99038F5800A7
-:10DFA000DF3EC624C820B9DA8E4611D437661C205D
-:10DFB000B97ACB1BE12D86EB58CF463C97403958B8
-:10DFC000CAE97C26E28D902FE863AFB99F75CA1B22
-:10DFD000E40BB87EAC1F78E64F871F8179D71CE42D
-:10DFE000748E11767AFB7E5A907DCF1EE77469811C
-:10DFF0001F1EA7A4A3EF7D1B4CD6CBD27903C5DD92
-:10E000005C2D7DEF407A8EB82C3D1FBA05F6A7E651
-:10E01000657E9FC5B9E6819417DB9D3CAFD9A412FC
-:10E020001DCA7A5BB33A0EF1569F7F2EE1CA5C4E51
-:10E03000A24F796FD4B211FF9C887273D91E230F3F
-:10E0400012E96E9C752A73048DB3F335F322CA73FB
-:10E0500013F36F97F27ACF3FA24BB278B92A84DCE0
-:10E0600003391D168B72BA4221BBF2C89EDEA50889
-:10E07000A7230A6B7150DE168F539EC4BBC3E756AD
-:10E08000BAAF243E9DE293A57D29EDCA297BA60C5B
-:10E0900044BDF283C6394760E7D8A719C984E7773A
-:10E0A000300FE9C147A2CA07A05F6282880F381209
-:10E0B000D5D18A7CF9C8880805CFFBA1FFD5D8BF88
-:10E0C0005CD791B0F201FCDE0919973CE8BAEE8901
-:10E0D0001BA3DE5B720B9E6F4F6776B42B6F57B935
-:10E0E0009ECB5EE7F429F95E8DE28BC679BE9D3149
-:10E0F000F1AB0C3C2F5EF90BE157157033F238C4CD
-:10E10000ABD5733BEDD9A7157E1F8A93EBFFD5C323
-:10E11000CFFCFA0ECC9303BB5B81F9CC69DA4BF7E9
-:10E12000FEE8EDEC4E7BE7FFD19FDAD55E2A8F1833
-:10E130005414F093EBEDA64E3D5DEA7BDB789CFC3E
-:10E140009B237EDBB614EA2BB645101C4F3F69F6C5
-:10E15000201F3FBDC54CF6CFE9E88E63CBB1BE2B87
-:10E16000DBE9A1D19C9A7BD1161A1C1FA2FC616F1E
-:10E1700087D17D1E279F30B7E0F9EEE2A732B6A027
-:10E180003D757280E3D91DE80F7C368EEE19606E06
-:10E19000FEFD6D821E91BE1CA07AA8BFB3911EB178
-:10E1A000F8853EC4C7E4FE9D7A229CF2E84F1F9892
-:10E1B000D413FD65AD86E7298F87A9560FF2E3A535
-:10E1C0005BC2490F5C697767E3FACB7E77DB1D059D
-:10E1D00038FEFB710CD7D3DEFC02F92B03FB1B5A74
-:10E1E000BE9F6B4EE67CA053DEF2B8DB5918779BDE
-:10E1F0004C71B70583E2305E55DEBBC8E36EF35564
-:10E20000C54579070F85CE231F3D489CAB4AFF4982
-:10E210000CB3C4231DBA19ADB7FDA1B42D68EF4CE2
-:10E220001F24F29F5987C89794F876ACFA55F29F4D
-:10E230009879BC5F78E873ECF2413CAF7881E56B8C
-:10E240008DFFA67AE5B71ABF4A751623B99B5FEF13
-:10E2500028B81BCAE502CE5549E593107E4B1A3605
-:10E26000BEF80EC1E5F11F7F8CE31EB092DF86BDC4
-:10E27000C3E1A7B7671658BE12F4B459A3079F7835
-:10E28000F4438A3739B13B3307F76D8EEA3B81F7A8
-:10E2900071B5D97C9FFC0CCA5D070ED1BEE8E7DBE7
-:10E2A000E5DC5EE17CA512D71183F12EE58B07D169
-:10E2B000B930A7F7E3EBB3097ED29FDB7E3AB4BD5A
-:10E2C00025E729FB97F393FDCB76FF25F6EBACC949
-:10E2D0009783F2B97FBA4393877D36D2971365C58A
-:10E2E000E7FC1CEA6C34D483F0E6FB3ADFB94BF868
-:10E2F000798E1A56DD6302FC6B6D7838CC1DCC47E5
-:10E30000AFF15C47CE57C695CA3CDA4D83843F7B5C
-:10E31000001BD04DFEEDE38827955DF36FE979771B
-:10E32000F9B79DF9B6FFE0F9B632BFB6B0CC501BD5
-:10E330009C672BF96161263CCFC2737FAD7C2FCCEB
-:10E34000D5B6EF8E3F0ECEE47E95C298D0F9AE7F63
-:10E350001EC4DFD7B3167EFFA0908BC304DCE5BDDF
-:10E360005F524FA9167C5BE6790E6BE6719BC34446
-:10E37000DE0E7001CA73ED72BF5B7C26C955793F12
-:10E380009F027D4D8F0E952FECA3798C641D54BA9E
-:10E3900098DD8825809FCAD1AC9CCAB1AC96CA7161
-:10E3A0006C039537B3062A6F653E2AD9A01611EF84
-:10E3B000792FCF331DBFD080F2B5F08ED07A71FBAC
-:10E3C00015E1E0A1FB03AF150E6319BFE7AF0B3CEE
-:10E3D000FAA7137EEBE1A1CFD71CC1FC7471C92849
-:10E3E00044DC64B4831D14DF5AC65C541F739570FB
-:10E3F00028F6BB8D3CBF57078FB2D0787141C06300
-:10E4000015CACEA2C03E65673AE8B9DC2F30C4E237
-:10E4100091FFEBF7513E2F8C283DEFB0E37D30AB01
-:10E42000A6501E7741E9F264A8A766FE6A0AE5795C
-:10E430000F2B7D01F3BCD39F7D98BFCF2D2D08738B
-:10E44000C2B8AB1E9982F98C6E1137ED16F1D2CCA1
-:10E450009DA7B91FCBBDEA1EBA6FCC3DC0EAC475FB
-:10E46000CABC7035999FAFEEB1BB7B66C27C13C648
-:10E47000F9D6704897F69E0A74DCEA0B6318EFBF72
-:10E48000D6C4DBCBFB6CE4FAE43D37BB76652E5794
-:10E4900092AE3C0F1867008EE35E3590F2E3DCBB72
-:10E4A00015E7E5C60B4F722765A2DE8549F14017D7
-:10E4B000FD841C6EDD959989FB949D29E27E621393
-:10E4C0000B108ED392CAB3B17F99179D2DF6A5BBC1
-:10E4D000724AA62B13DBEB9FCBBCEC9199EE3C1C54
-:10E4E000BF26E222E59BB5E5BDBFC69FD8354FBD2F
-:10E4F000DEC5BC26E22BDAFCF4F6F926BACFA9B0C9
-:10E50000DC5D8F21CA374EEF188CFA31F43B1CC703
-:10E51000AD31F913F2548C42E6F9EFFA7CEF3DAFDE
-:10E520001DD4E4B74B3AEBCC6F3FC7F3DB03F4F5F4
-:10E53000E8721694DF2EE946D2DD50CC6F8FC47A94
-:10E54000C67C6C37E2FD6394DF3EEA985FE4B77FF8
-:10E55000A8CD6F77FDF3BAF2DB4F8AFBDE4E5AF897
-:10E560007D49F23EA965BBF9F9EF3285DF27B5ECAD
-:10E57000397E9F94B40B1789F5551DDCB606CFF98B
-:10E58000163D3E97EEA362E21E5407FC04DB85F2C3
-:10E590005E527D1E4C0DDA83A437B790DEA5CF877F
-:10E5A000A979BC8CECC11A9D1E5D9D29EC4121CF3F
-:10E5B00098D0FF168A6F711D56B2CF4CA4772E7B70
-:10E5C00062B9D38E7541576CC70E3A7793EDD9E394
-:10E5D00031840B92CE16AF53487F95F0CBDD6E762B
-:10E5E000D13DC6DB7B93DE0AFAB6C863F6727B1BAD
-:10E5F0007005E3E177467524A19EBC734FBA1338CA
-:10E600002C7BA5DBFBA777E8EE9F7E4A73FFF439EE
-:10E61000FC0FF5B453062FF63398A5FF12EF252E05
-:10E620003A65747A1D81FB98AF74EFB084BF59ECE2
-:10E63000D7B5DE43ACBFEF59E63FE8EF235E2BEEE4
-:10E64000231ED1CD7DC466B55925FDE16BA3E65EE1
-:10E65000E21BC53A8B1DCC8BF7FC0E6D356AF6BFFD
-:10E66000D8BF81A13E147ED8A8F123981DDA7A8301
-:10E67000C40771BF4857785B3BE1692678A6D03D57
-:10E68000CF45BA7B9E259C3AEF79EE6F25BC1F7A69
-:10E69000F00515F9C1B5DEF7FD43DFEF7DA5FBBC45
-:10E6A000F5F774EBEFE5EEEE9E6FB9EF792DCB3415
-:10E6B000EDF5FB5E70E0A7DA7BA8C57E7BE0E7BBEB
-:10E6C000DCEFB64CE1DF15FBFD355E800674F89794
-:10E6D000C8530F22594E88E07CADD3AE1F1E46763C
-:10E6E000D6BB8E98321BD2BF9053E5424E8115C7E0
-:10E6F000EB025F9C3E1E47907F94DF5F51E8E7F19D
-:10E7000004834F85CE0FBABD58D19CEF76BDB79824
-:10E71000E7190FBBC8E3F4F4E7FE326FA8C215AEE9
-:10E72000BDBFA19B3C22E9C7013D9E99508F37F0A8
-:10E73000FBEC42DC73BC494D0ECE2372937F67B273
-:10E74000C59780F86C4B74C7671505F28D46615EFE
-:10E750009142F6A0104A513FC238CF764CB2ED8BB1
-:10E76000F9A3913FC23C1998BEDD3F989BBBF86F5F
-:10E7700060963B310BE4C971C5BEA600BEFDCBD08F
-:10E780003309289FCC78AE9D4FE7BEC9F85E7F3F26
-:10E79000BFDFE020FDC2F35385EC8733D8D990204A
-:10E7A0007A5D1726F21A757FBF40D853F2EF171C17
-:10E7B000872E1601DF9ED1C4F3A897C6B70A3B8CFB
-:10E7C000DFDF3AB7BF95EE7F62AE0227B7C3A57D04
-:10E7D000D54FBD16B979A5F8A2A5F1A735762EDBE0
-:10E7E000117355E7898175F3FE8F3F1041F2E6F80A
-:10E7F0000303C8CF17E8BF8DECFE19B5DA38E3592B
-:10E800002B3FD2E0DF6CCF679AF7FED88EB07EB098
-:10E810007EFF8B7DC64E03F89DDD6D1E8C7406FB5E
-:10E8200036352BC80EF63F94369AEB01575AE71946
-:10E830009AC73111272AD7F949DD51AAFBEBFCBA57
-:10E84000781E8FC62E95A5E90D46F7E474283D9CE9
-:10E85000A1FC2C9F6671BDFD98C8833C26F2208FD9
-:10E8600089BCC563224FF198C85394F9A3C714E635
-:10E87000C2788AE94AF993B315CA1FBD07F1AF669A
-:10E8800049470EE6DBD5E4FA672A2AE58FAEC4F5E0
-:10E8900087C81FCDC1BCF75D5977FE08F5F8533D19
-:10E8A0003C742FC9EF774CE67513A78F57B246110A
-:10E8B0003D78FBBAEFC37EBE50D416C2E797153A37
-:10E8C0004F652EBF69E265F24B1FC8E2E70BEB759F
-:10E8D000E5D62CCECF5E11E518F5C154CAFBD9643C
-:10E8E000A6BC1F18C765083AFFD7E767E5BF6E6E7D
-:10E8F00041BE21FD304F6425F273CF64EE5F89FD88
-:10E90000A599E76DF97D0998E785F13E786F063B9B
-:10E91000CC5C3C0F8CDFDF27F7E109B10F74917EEF
-:10E9200061204FACEAE0F14F908F8CCD726FC6F54D
-:10E93000CBFCA5AAC8BD1437F1429683BE83F9D299
-:10E94000FA811FAC5608CE5DFC70CFE0FEE8F3DF25
-:10E95000BB5BFFD9F9BEDF642506F2A782F2A65E93
-:10E96000C079C875CB7904FAB93C5E4B7F52C0DFE1
-:10E97000B53615E944DE4F9BAF2AB32686F8FE0371
-:10E98000B16F5549E57B711D4B6AB9BFADD31E57B9
-:10E9900036FCF863DCAF8356E273DD7DAF5F67D58D
-:10E9A0006B07091EB0CE99B8BEA075BE9B15E417C3
-:10E9B0003CBBE7C3DF20A8AF777DD79AC76CEEC119
-:10E9C000EF43ECEA8F860D0DD2A3CCF2FBFEDA7B8F
-:10E9D000C6CCF8F71060BC46617F340AFBA3294C13
-:10E9E000FCBD1A9D3DDAE8E3F13C8DF1268AD76142
-:10E9F000E2EF2B48F9BBE23D1EDFB32291D17B9CB5
-:10EA00001FD281E2DF4FF2A0F3BE2805E41CE0C371
-:10EA100019BBFB02C28FB997937C506FB03A119F1C
-:10EA200077BD7DB3B0ABB8BC2912F2A508FBC175A8
-:10EA300064F524B95328C61D6CA925BD7608F308D2
-:10EA40003F8BF0473CB05F638FFD5F0DF62D3910B3
-:10EA500068000000000000001F8B0800000000009C
-:10EA6000000BFB51CFC0F0038AD7983330385A31AE
-:10EA700030E45933305C07E2307384DC4B71049B23
-:10EA80009AF8A73C65FA374832306C02E22D40BC58
-:10EA90004D9274FDB7B410ECBDAA0C0CB781FC6E9E
-:10EAA00020FD5D9D816117907D07882F83F840CC04
-:10EAB000ACC6C0200EE4AB00693F20D607E2BB40E5
-:10EAC0007E9A1A6EF3EF69E1B77F9B062AFF1D1A43
-:10EAD000FF923A7EFD999AF8E5DF1190C7861FDB19
-:10EAE000911F1FEAF6B44927B4C207D0D2F54E13DE
-:10EAF00006860BA60C0C22D0B4BF17495E0D28B6B3
-:10EB0000CB04C29EAB074C7B66403E8E7C310F2807
-:10EB1000BF11286F648EDF7E056654BE002FA69A53
-:10EB20006F4C08F6042154B9C3C298EAB9441918C5
-:10EB30000065838486D80300000000000000000008
-:10EB40001F8B080000000000000BE57D0D7854D5F8
-:10EB5000B5F63E73CE9C99644E269310C240024E89
-:10EB60007ED0A8098E1030261372263F242401C3BC
-:10EB70004F695A699DA045DA8222DA5E6F2F5F19CC
-:10EB80007E1A2245C516ADDADEDE812A4FDBEB7335
-:10EB90009F60A9E586442610100D3F11ADDE7EB6BC
-:10EBA000DF8DDA8BA10D38C160E9F760F9F65A7B89
-:10EBB000EFCC9C939904D4EFDEEF071F9F9373CEA5
-:10EBC0003E7BAFBDF65A6BBF6BEDB5F758C944E25B
-:10EBD000AA20E40AFCA357DF6442E8A391AB785E65
-:10EBE000692741C72D84A4D9F7F6CEC820649E2694
-:10EBF0007B6B3D844CB2B7F4906242CA89CD63CB43
-:10EC000021A45BFA4DEF0C7A7F34C5EAB511F8F711
-:10EC1000002173085967A77FD2F2472FD22BFDFE40
-:10EC2000E85F2D2122115223371209BEB74BBCBC1D
-:10EC3000AE2DC824A49AB07F732F926A5A8C54BB0D
-:10EC4000EF6D243308A972D15276F6EE0A2B4F08E5
-:10EC50002D5F4658FDBADDF8BE8C6C1F929D701773
-:10EC6000919B8A687D9755E37B77ED07C409E56240
-:10EC70009E433FE00FCA83EB494AC61907FDFB36A6
-:10EC800072DB15995E950984DC1EE58BF94A481004
-:10EC9000F9D6C1BF5748D30CB827E4456C3F5DF0A7
-:10ECA000B1AE9FB869BF334A88B7967670529DDE81
-:10ECB0000D7C29AB563D367ADF5D336772BF46C89F
-:10ECC0000FCFB5679142FA796835F23183F3B1FB22
-:10ECD000DC4BEFDC47BFF7D511AF8DDE1FB07A27D5
-:10ECE00037158EA6C757979E44683D4F341D7260F6
-:10ECF0003D84FCED4A26AF278F90CEA6DCD4409C05
-:10ED0000EFC4F5F10D2E426CD1FB1D3AA96BD7462D
-:10ED1000977B0906733654BF1CE92CE3BCFCA14465
-:10ED20009ADBB1DD661CA7039CFE1EFD90A3BF10FD
-:10ED3000DE871D16DA8FE090853C4FABE81CAC4CAB
-:10ED4000067A37E996303CEF1C5443C00FE26ECF91
-:10ED50005A54349AFE03432B6662BF02AB0DEDFE9C
-:10ED60006090F65783FEBDE89847EBB9306871C9EB
-:10ED7000745C9FE0CF0F04DA1D2EF86E201DC7F3E0
-:10ED8000F10DF4EF1B12F3E3F1B9DFC80D6850CEBB
-:10ED90006EE4C7E085637974DC3A772A5EE8D77859
-:10EDA000FCFC016F47DCA77BC3552E5AAF2FE295C1
-:10EDB000408FD207099990037AD179D809E3DB48CB
-:10EDC000502F7C4D9549D3593FBCB207DE1F974168
-:10EDD0003E7CAE30F663841EA0EF06A0D38DD7A78D
-:10EDE000797B4FC13862FF36255D4FE9BD50A26087
-:10EDF0003DBBF54D7E05EBBB1C96411E573379CAD2
-:10EE0000F004365A81FFF7106FD003F512ECF74F7C
-:10EE100079FF7FC2EB13ED740EA6FB15A0AF9978B6
-:10EE2000414D6AE4F5DDF0BD6F15A37FDAC36B25B4
-:10EE3000E0DF75EBFBF11AE274EE80EF6981ECB56F
-:10EE40001109F836F5A1305E776EFC7D37D097BAA0
-:10EE50008524812D78A2DA9206DF3D316F4A12BCFB
-:10EE6000773651C5A7F6C0E7753DD043FBB3B35A1B
-:10EE7000413A770E52FED372CEA0CB0B7AED0C7ACC
-:10EE8000F8D5EB85F207393F0EF076BB381DCEA0E2
-:10EE9000CECBAD2D8472CE6010AF21DE4FE2598310
-:10EEA00072B78ECBDD416BE026E07BC6207113AAE2
-:10EEB000CF07CED74F867645FDE6F27B9EFD9FB30A
-:10EEC000E0FDC441F2AE75065CC32DD0DE0DD00F5F
-:10EED00027DCF7B54868A742A847FA650B2105511A
-:10EEE0003B9571A969FE1D1EB8AB413D1276A06C21
-:10EEF00050B548A9B17A568D7AB093EB41F56018B8
-:10EF0000E584EAD9610BE553F01CD5332A5F079AF3
-:10EF10002C38DECF4554B4C3A4209CB52865B41E5C
-:10EF2000750EAD9C09FC16FA34DA7EFCBFA15F3B7E
-:10EF3000693F0271EC9A684FE89BF9FDB8FAE60A5E
-:10EF4000A2BE75527D0B023F9B2C49F9A07F6D1626
-:10EF5000D41377757B37D397D5A86F19F7307A26F6
-:10EF60002D0FA11E8CA7773B3D2EBF02F537333DF9
-:10EF7000ED1C7C6FA30DC66339E176E27237DCFBD2
-:10EF80001E667A6DD633B31EA6FAFA503F73B644A6
-:10EF9000085C3D9B1B51AE692B49A87F09F4B01357
-:10EFA000F4B0F8FF1F3DAC82799CEA5D9A766B8FD6
-:10EFB0008BF67B7E84303CA43DD103F3784DB68D37
-:10EFC000CDE353DFBEF37E7A7FCCEA40FE1F9B4841
-:10EFD0001F16C3BD8C7AD79DB3357B1D7D3F3F4344
-:10EFE000C2F784AC42FDAE1578091E51FDF1F74B16
-:10EFF000644E3A947B7F4715FDFED501E28557AFFD
-:10F0000066CB58DFE141C2F498EB672DEFEF61FE6C
-:10F01000FEC2251202FDAC0048429F7F7C3632CDF5
-:10F020004E5F7D68B95C4472E97C2CF8C571460D71
-:10F03000D7FF5733641DECC6E1F529219283F5858E
-:10F0400041DE5E7DD81692697B17F2F35E0813C02D
-:10F050007F91EBD7D1F73DAE8F5262F57380CBEF46
-:10F060009FB8FC0E723CB1E3E6A64512E5EFABF9A2
-:10F0700079A85F17F23F9A4628ABEFCFFBCB19B8C0
-:10F080001212B6025E32D723BE7FD51DF8B244718C
-:10F09000D540E87D278CE7B97D1FCD802B714F408F
-:10F0A000DC351E3EF3091C16E9DB0C388454533959
-:10F0B000991395934991BEC3C037DF30C363A46EE3
-:10F0C0000D8E4BB98BF1A5FBE25B59F05D07E75B59
-:10F0D000D7505F16DAC73A633D5DD6FEE54DAC7E8C
-:10F0E000FCDEE762E32AE87999F7EB6949220C270D
-:10F0F000B2F1F3F1EFE72A7D136EA174CC3D267BCC
-:10F1000037D2477307FAAB491C3BB45B4A4379AD2E
-:10F11000B86494D7AE8B4765E00BA557067ACB232E
-:10F120007D32B3E34CCE7C5CCECA23A70DF65DB432
-:10F13000DF1539DD00ED5F1860F62A115F85FC1CD4
-:10F14000E2E3FCB2D0571272DC42E5E508A57FDBB2
-:10F1500018DFD7B86403DD42FFAAEC0E035EAFB838
-:10F16000946EC2FF467A4B9530F2AB14F8E549CC69
-:10F17000AFF5523AD65F36F0E9F865B62BA2DE2E2F
-:10F18000E063E168BA0808B5A05BFE3F9FAF9DF061
-:10F1900007F35F8E829E92FEBD72530ACC271ADA65
-:10F1A00093B26A89E172DECF46F896365527F4CAE3
-:10F1B00023A19F57EF9342B58037BC3F433FF142B5
-:10F1C000B1CD03766892E709A53F46DEEAF9F72359
-:10F1D0007CDCA0633FBB67BF9D05E5BAA66FCC860C
-:10F1E0007198EF79DBB18EF2FF28D79B8E0D7558A1
-:10F1F000AEEC1279F45618977CA66773795F7A386B
-:10F20000DF0E71BB7190CF9B6F6D08E0F5CD0DAB3C
-:10F21000F07A7AC35ABCBE7AE9450DC6AFB7200F63
-:10F22000E7AF3AA55D89E757950E1AE5E6650FC584
-:10F230003BB47CC3E08AEDB7D27E1FBF6441FB7C48
-:10F24000BC206F4CBC22EC8728F78AFB6755C0B7FF
-:10F25000C6014A6ECEE8F266792D23523BE0BF32FA
-:10F26000EFEB0AA1F67241F12E2D16C71C38975903
-:10F2700004F51E90FEB0649627311D65BE3EECE796
-:10F2800082F0EF144F4AE2722794BEC659E8A732C3
-:10F29000FD2AF3BE5BADD3F66A0B7735A25C0C2B6F
-:10F2A00016908BC6C2BD7C7C5D381E0BC47C562C70
-:10F2B000D785809EC10B48676FA13C11E8DB669142
-:10F2C000512E17786C886713B63FAC9030E89712D0
-:10F2D000C6713A4EEB01B93841ED1E7BDEC7EE69CF
-:10F2E000BDF0BE3BC7A679819F6E118F5865908F88
-:10F2F000C6FC59C7BD94EE5EB78CF8B2F752A59222
-:10F3000046EF4FC0FCEA89CA671997CF1330EE2049
-:10F31000C72119E73F8197457D5D97721F2DA6EDA7
-:10F320009D0859E37EDF546DD4C73BDC0EC37D7569
-:10F33000F604C3FD89C1996F36417B947EC0732466
-:10F34000B8DA407F17D87B68CF25E1FC7FF472F5EF
-:10F35000E0FD502E64A4CB4C47EFA5DC2797D27A72
-:10F360008FEF93514EABDD46BAAA2EBE791CE23820
-:10F370000DD4BE00DF5ED6151DFA7D625F4A68239C
-:10F3800095CB970B5F77006EA0FFB405B49D2AC2A2
-:10F39000C6B732C358CFF1C1F7BE0F76EA825D46D9
-:10F3A0003B57F9D7435B005E9D2A7EB007F87C800F
-:10F3B00048C8A7F273BB65A86F59C8F8FDD2E546E7
-:10F3C000FEAC593AC164FF8DF1A52A0F8B13CDF520
-:10F3D0000E617DA510FFA1F7959A312E34178C414F
-:10F3E0004CBDE5A6B850A987C5854A212E24CAE59B
-:10F3F0009051769FDE63FBE679DDACDF09F5DF42F5
-:10F4000056413C8544168F835B36F1F88AD1DE1273
-:10F4100065A704F250CADBEFB0B63B802EDFADCC5F
-:10F420007E91487ADC7895D98E10F220CA95E02337
-:10F43000710549C61CE83F2F63B67F9C2F6D743859
-:10F44000AEE03C10E4F8C51357DFCDDF67737D9F56
-:10F450003740ED66068C97EC02BB71FC12D1401F61
-:10F460004F5179672DF75F8995DB868176944B5AEA
-:10F470001E469096F7A2FE364D66FADB9D53ABA46E
-:10F4800031FB1957DFCD7A3040824F15D3713D9E45
-:10F490009FF7E452FA5DEF3E61072C3AEAD53E86CB
-:10F4A0007B4F0CAE4379BD40E515D83E5AEF4F6B0C
-:10F4B000B1F3FE7F96BE9BF57C44FF47E93BB35B0F
-:10F4C000C7872DD89FAA8B0AD6D37099E03C6ED6F9
-:10F4D000FF13DC7F7B597F53F3C27C58F83EFAC799
-:10F4E000E453EB3BF3430E0C106CBFFCDC7B32EDC2
-:10F4F000F9E7A6EF42CF85DE5EB3BEFF27E9B9F993
-:10F50000F9B72D1CF727D0D3A8FE07B1DCE61452BB
-:10F510000071B60E29D9BB2907F49DC57DCCE5271E
-:10F52000C8221E6B0FFE91F6AB850A4B2A65F51AB1
-:10F53000D23F0DE461E2640FD6779FA53F13EE3F03
-:10F540002491CC9B65C0CF643FCCBF924EC8C3947E
-:10F5500024C9E322CB6712F2B81CB0CBB43E6920B9
-:10F56000FC5789F2993C443C80076F90020E786EFC
-:10F57000A37CD26879A29C469C48FD37E4D742AE72
-:10F58000740BED5A18E3F025D6C17EC1779C3F96E7
-:10F59000BBCEDC4CEB2561E9CACDD17EEEB186B2A3
-:10F5A000BC1AF433F4E3FB206EF58CEA7D3E0EDFEB
-:10F5B0002D9FB29F607E909F16C6CFA025D9FB7C61
-:10F5C0001CBC35FFDAEB7F2B995ECB808FB78CE6C6
-:10F5D000A33448F9077C50FE7605FCC43237932FDC
-:10F5E000F9435587380D91EDA1E971E858C3E978E1
-:10F5F0005CD66FA3C886C855EDC89F0330FE1AF0CD
-:10F600002F837C3B46BEE6C92AD2253790B538BF4A
-:10F6100090B005ECC878E361558822C338F65D41A7
-:10F62000BBDBCAE9B3D1E7DACCC4E3253778236181
-:10F630003A4EE443364E07E61BE5723DA7FF414EC6
-:10F64000179827A8BF14EAA7FC92FFACAE8D374FDE
-:10F650006C17FCE7FC32973FF025D67F517EABCC90
-:10F66000F42978EDE3B66C525EE27113F22E0D1EB2
-:10F670004D347E6B4371F47B8E6CE1FD0D4A57A3D4
-:10F680000FF3B85CCA5574DCA07F35463E6EE6FDCC
-:10F690005ACEEBBD4BD2FF1EE4E106A9E91FE04ABA
-:10F6A000AAFB50FF40C6A1DCCD44FF6FFCFD06D095
-:10F6B0005352677C4F9F6FC2EF9AFB707D4A3C3F6D
-:10F6C0002CE95B64F6BE15BFD38DEFA91CB6C173E0
-:10F6D0002A2F449E09CF193FA99C103BBD6FDD75B1
-:10F6E000F79781AFF4FBC7B07E72DAF0BD150C441A
-:10F6F0003ABB4A33D9F559903BEE9F6E6ED691AF27
-:10F700002A59CBFD67369FCDE5F399FDAF6C1EBC42
-:10F71000E05231AEA524E9A130BDA6BBC23AC40374
-:10F720002790BE20F863CB96CA063BDF6C9A5FBE7B
-:10F730007C8F71FE5DBE3ACB70FFD587F20CF781EE
-:10F74000F5371BEA5BB16596E1FE9EED6586FB959C
-:10F750003BAB0CDFAFFA4983E1FD379E5B62B85FDC
-:10F76000FDC29D71D737C57CF788E5DDD54DB45F07
-:10F770009BE1550C5E54A2EB971686C78CDF51F1C6
-:10F78000F32873A01CC15084594E15D3FA67FF8823
-:10F79000FEAC33CCB7878239190015F41C4543FC05
-:10F7A0001FD4FBF233A378A0CAB3B231DEFC2BE83E
-:10F7B0005178393FE9AF8271D315633985AFD76A84
-:10F7C000DE08C661CCEBB58A671ECEEF667ADF91A4
-:10F7D0005332C02ED1BA3DB84EAB5DDD7C3A6EFFE0
-:10F7E000A825BCAAFEF1F6FCD0CFBCC4FD9A5B1CD8
-:10F7F0009181BCABED57944E23EE11EBE40B5851C5
-:10F80000529AF31CFA630B803E989F8B19DEB1D39A
-:10F81000FFD83CCBF8DFC0CB373DE4B2023E6EAA46
-:10F8200036D2D9C07114D54305EC446981E93DD085
-:10F830003903CA19F1520F97474DE1EBE573C81C24
-:10F840001C07AEB78B84DED6B0380771C55F47AFF3
-:10F85000BF440BCDC2F651FEC4F3D70AF292E1BB0E
-:10F86000056DC463A3F8E491D91B5D9580F375AB76
-:10F87000B78E96AEF2F278932E239EBDAE80DD3722
-:10F8800056B3F8537DA00FE3808DF78436C275CA56
-:10F89000AAB0827498F8FAAC279486D880F3378B94
-:10F8A000F32B4BF095F351D8F129AB8DE3D8586C7D
-:10F8B000E4D742CE4F339F17723E2E34F1B10BFE88
-:10F8C000A07C999D808F0B381EB5CFE6FEDD707A47
-:10F8D0005CBFF1591E1F13F2A398E635613F46E65F
-:10F8E000372EBF8F831D079CE7E23885CF7B89F4D5
-:10F8F000C89FDFB2C30FF1D60CAB61FD621EEF6B88
-:10F90000693E5BEF28CD9011F797BADF30C4994B71
-:10F9100047E2A3BA5633272A9F5D03CCFF68759F41
-:10F9200096619C1AF219CEDFC2F923E27F07F8BA7A
-:10F930009199AEA3D382D9808F8E5D0C66AF2B8652
-:10F94000F88F8472D279EB03D92C5F80C773797BEF
-:10F95000AF0C05D17F3B3630F6FAA2C0F966B92963
-:10F96000F586709DB174A05D86FED645E81C44BB4B
-:10F970003E2FFC0BD95384716905E86974AF503090
-:10F980005EE66E5120BE5CE7DE5505FCF091D06668
-:10F9900027C4D53C92370C7C2C64FABB8AFE17AB8B
-:10F9A000BF82DEDAC18002FA5EEB31FA353E2E6F9D
-:10F9B000356ED3F3FC5A94379F49DE3609399B4E96
-:10F9C000A6C7CA99885BAB43B95C5FE3CB5927E70D
-:10F9D000C7BFF338EB1F787CFA1DBEAEF7BB0D1E18
-:10F9E000BCBEB2A1009F1FD9E0C5FBB73794E0FDB4
-:10F9F0006F21CE4BEFDFE071DCD73734E1FDA90D8D
-:10FA0000CD78DFCBE3B4428EB7F2F5941AB913E3A5
-:10FA10008B0DDE80DD15234F0D9C6E147DC021857E
-:10FA2000F1E3AFB669FB1590AFD3237A42D05E2CD9
-:10FA30006ECCD9BD8DF2C5F65D12005C693BF4AFAA
-:10FA4000CAF554FE1BEA72AC2BA1BD60BB320BE4BD
-:10FA500031FCAF4A1E3C6FBCD57A779CF6453B899A
-:10FA6000DA37DBB72575463FB854C4D1070241E801
-:10FA7000E7A4814018E82B75AB9E7871E1EEC92BA5
-:10FA8000DD204FAD67036E90A7D6C97B64E6AFB3A8
-:10FA900078B8CAE554942F75EF36E8A1CAE9EEA00C
-:10FAA000CF81DE8E71F4E000E79B28E753C2B24BB2
-:10FAB0004BDC3F9F295EBE458AEFB7265B19AE75CA
-:10FAC000F2F5556A3315D0331051A07F12151BD0B3
-:10FAD0002F4D63710B8737C0EDB2711E4F2B696AD2
-:10FAE00002BBA465106F2D9837ADDF0D722397CC44
-:10FAF0003B0BF32C298CB1DBE0F798FDFFD87B1989
-:10FB0000A7AE604A3A5CCDE5187F352E426DB7321C
-:10FB1000FA1EE3710EC15F8DF3B7D473ECDFC0AE94
-:10FB20003EE665F198C732D8BAEC85921588CB4A83
-:10FB3000B95F60233BB07C3269C7EB66AE67174A9A
-:10FB40004E13D07B59A1B83903E8B18782F47BA763
-:10FB5000C9BE2B9A91DF12E5C972C0D7038AC1DFF3
-:10FB6000904A989DB783BF0E7E0CC72F513F2F4000
-:10FB7000AE00F3AF124F6DB11AFD31711D502C283C
-:10FB80000F2EAB299FEEFF7AFE1DFD5CF927FCC40A
-:10FB9000119C77F8EB04D663443EA128FF8A29DE46
-:10FBA000A466B3751873BD775819DF2BAC1C1F0BF7
-:10FBB0003CE133B79314047EAAD49F4A9246D7936C
-:10FBC000A83D3230739CB8F5466CFF94E262FE04A7
-:10FBD000CF07A26EB964F04FECBA3B76BD7FE47BF1
-:10FBE000B7C5A0A7A3E966FCF9BCE95D401D52B802
-:10FBF0002E1476B884E1C9451E8A27E99F8B3426E6
-:10FC0000A727FD526813CAA96EF0B7EA4A6ACFA2C5
-:10FC10005DA2FE883A87E3744A7F1BD44BEB797D63
-:10FC2000B2F86EC49E58AEDC32BA9EA66A867B4895
-:10FC3000F097F363E3074D545C0A6642BDEC7B5AD0
-:10FC4000B4FB4A3C3AB8DD6A2A7960A1E6847B5D60
-:10FC50007A1AF05E610C3E00BEE6DB8C7C36D9BFC2
-:10FC6000EA5176CF686FE751F9DD4FDBA993D736BC
-:10FC700042C8BBF68915FB5E4572841FE2895BEFC3
-:10FC800071F8E376407F46BC42BC2C8FA32AE8691A
-:10FC900044BE6748249403F41BE998976DF2C3327D
-:10FCA000CCFDD881E37848A1F3081DAF43741C77DD
-:10FCB000A07F1CDF9F127E5E45CE30FA53C2DF2349
-:10FCC000DCDF73D1FF62F158392FEF7FC8A300FE4C
-:10FCD000F5DB4D71E691FC6382FE540531D25BCEBB
-:10FCE000FDBE7293DF27F4FD25612F855FCBEDE12B
-:10FCF0001DC29F2A1F7B7DB9C7944F574D096FBF07
-:10FD0000063D204015AC3791113E19E4AB3BE7FAB4
-:10FD1000F630E5EB1DDE24B6DE42E954843D473E75
-:10FD2000319CBD9097BFC3A3A2FCFB34B67ED138F3
-:10FD30004EDCC257C2D60D4ED925361F04C99B24AE
-:10FD4000263FBCCAC3ECB566928B6C4F5335AC03EF
-:10FD5000698AE40D91D1F25ACDFD39F87E3D6545B1
-:10FD6000753EF5C967C6CB2FEF83D02A29A7343C4F
-:10FD70009B93787C756FA40A86E76AC7979870F69C
-:10FD8000A9C87B98D775A150C2759FEE9C8FD13FB3
-:10FD900010EB3B51FE1DC57C145FC947E8AF8CE4F6
-:10FDA0006DF1FA168AFA4A0EE37ACDF75C87314F85
-:10FDB000E424ACE3D2EF4F2A110DFC90F9025F511D
-:10FDC0008E86053F73204F82D517E67ED529FB1B13
-:10FDD0000EB09B22EFA4CB27D7C58B7356C82CCE71
-:10FDE0002CAE37A96CDE99A3323C27EEC5F88EC83D
-:10FDF000937CBC98F9E1DF318CBBB97E28DF8CF1B4
-:10FE0000C170E158FE68A389CFD3543EEF71BCD1D5
-:10FE100019191BD78A7E9AF960EEA7F93BA7CAE2A7
-:10FE200065F758F59BD5D9D176C47C672EBFC81E1F
-:10FE30003F2FC75F628C4F9AF372EEB1064A55CAE4
-:10FE4000CF2A45DA92EA41BB86FA74E8B28638E6F0
-:10FE500042E4D01618D623C32C3E5A4EE4908DCDE2
-:10FE60000B8DB06E27F446C8BF998EF1DA2F1FEEC6
-:10FE7000477FDC7F29520DF27787AF1BEDEA026ADC
-:10FE80005727C4B1ABF3E4C12D13407FBD6C7FC7CE
-:10FE9000A9DFF755E3BD26613EAC5E9EA74C003955
-:10FEA00070C58F57CDE572327A3D4FD8559702B85D
-:10FEB000C11C6F9BCBF56EAE491E02EA080EBAED6F
-:10FEC0004ADEF8E394481E2E442E3C182F8E2AAEAC
-:10FED0005509C6F73E62E26FA731FE6CAE47C48398
-:10FEE00088DC990DFA2CFC5F73B93695AD7B1C2923
-:10FEF000BA97C4E655097BA096B46B1017EF2D197D
-:10FF00007BBE30E70FFA89314FACCA6E5C8F7D4AF9
-:10FF1000D11F01798CE2A416E6AF96B4A0BFBAB0A7
-:10FF200090EF0B2ABA17FD53E157B7DEBE17F3B9AE
-:10FF300044BE96F04FCD74F74E7E11F379C6A35BA5
-:10FF4000F8F1C76D325B87A07EBB07FD768AFBE2C6
-:10FF50007CF78A8DF1EB578ABE0BF4758B5577B71A
-:10FF6000C03A6391CDFB7C9C7118B031FDEE4DB071
-:10FF7000DEFA0758F8988DFD403E98E71BE1C78AE6
-:10FF80007D4A93DC4C6F1BB81F5B56D882FA98E60B
-:10FF9000A67E2BF0CDCBFC563268F453176A7D5900
-:10FFA00030FEE6F94E1EE67EED55FAAD5B93981CE9
-:10FFB000055CC4EEA6EF93140A4DE9FCF7A45C7946
-:10FFC00018F8B1358DA03F70324D0DED8E136F785E
-:10FFD0009BCB5B8DBCDA206FE51C97A8D5FD1AC4BE
-:10FFE000034E0EB3385EA271DB66C2E9B905C46F79
-:10FFF00073C235E2077ED07BDD86D708E6677FBF18
-:020000021000EC
-:1000000068656EBCFA76B72971E7A53FF3715B2C82
-:10001000F2B5EB583CF2BE4215E3C293EADE3D8AEC
-:1000200072DAC8E574810DFBDD5BA4E0B8F4DE9EF6
-:10003000D30EEB9ABD4576CC47E92EFACDEF215F82
-:10004000BBBC4432E49708F92D075C0DF5DB59BCC5
-:10005000F33E37B3C3BD1AC72F3C6F640D1FD39354
-:10006000FBDE77C6E68D2C1172DFC8E3E426FC4484
-:10007000CD48DC751C91477CBE91C585EF13FDDD35
-:10008000BF770BE85D03979BEE8B2BDDA89FFB5999
-:100090007E5E6B510BC68BBA27BFA5C2FD1AF7193E
-:1000A00015EECDB8428CEB7D25BF62F9917C5CD713
-:1000B000403C9ECAFBCB99375B3DF47E71F8762BB2
-:1000C000C43B457C76D43A145F4FA965DD27B56EF5
-:1000D00086AF8F663A487206F04B0E49C0B7701271
-:1000E0004986FC33B7359444EF1B94FE69805B1C52
-:1000F00026BC78FED77BB341BF8FCCF8408176AF6A
-:100100002B79B715FA31A5642FC6FBB3F6EFED498D
-:10011000A7F52C2C205EDD339A9E1A3E3FDD97C159
-:10012000F285EEF38682B0EFECDC65B69FA2F2D7E3
-:100130006F54C1B4367A5D46278043C4BA8EE2E676
-:10014000EB227C7D825CBE22C58E5B8312B083FD78
-:100150006D2D79C309F42EE67CCBDD27B7807C5763
-:10016000FF7AD657404EC8ED36D774DAE039D76FEC
-:100170009DD76BECFDBDACDEB9015ABEA1706FF628
-:10018000CAA2D1F665447F0AFFB22140E93939FF9E
-:1001900037D980DBDEA076D703ED72BB65F697CC4E
-:1001A000F3AA392FC6DCEF4C65519D6D368CF78F65
-:1001B000DD39317246EDC00AA07FCDD376CCE34A5B
-:1001C000DBFFBA2A837DA3F8BD568ACAD11A2E470F
-:1001D0000D1AB37FAD4524B44902F93BD358067AD2
-:1001E000F72ACB379CB4FF5D963F6A9A1F7AF9BC19
-:1001F00021E6E3DEC9EFA1FE9CDFC7F52568916229
-:10020000E3495A4964298C8BE04FA7C9DEF8ECF129
-:10021000E326EFD8185E2DD7D87B8DDA6F58D73606
-:10022000BFAFE4FE54155C63E685076D0CF78AEBFF
-:1002300035E4213CF55DAAFFDDDB0FB9EF463BA5B8
-:10024000216E5FB37F6F01ACD964EEDB5BCDED0552
-:10025000FA6532EFE724E2413BB550B3B3F50393BF
-:100260009C5B4B7685013E8B791A1C7225336A475D
-:10027000E4D838441C3F8C04F537F363F2BEE8FC45
-:100280004EC0AE54B959FCD52C276925D4EEE020D8
-:1002900050EEC5ACFB9AE5B6410BB8613D9BEACF89
-:1002A00059B6FE49E72B884FC88D5E1C4F2E9F160E
-:1002B000FA1FCC7F0EAF513EAD05AA01AF98E9F809
-:1002C000A9CD88FFC5FC9CE6EE47FA166AEDD9D0A9
-:1002D000FE24773FFA5BD4BE67C355C899B0D723D5
-:1002E000F257745B3DD877906B58223F59322B19E7
-:1002F000EC60839BE114628AA7F7BAC7F6377A4CA1
-:10030000F278D2C5FCAB861292EC4A057D6771A7E4
-:10031000DE47D3773962E272FF640D74D862E2EB94
-:10032000CEC22FD6BB9C606758FE5629355FD6BC1F
-:10033000683C53C44DC57A9F88938E8A671676634E
-:100340007E9755E45DF0F5BF51793F09D61DC5553F
-:10035000C4336D9BDA152F5F2F413CD6C8E370C3C1
-:1003600033C78987B2F803C567BFB54D1C1F9FED22
-:10037000E17EE600180F7A5D6573E155837C144ACF
-:100380006A6F527CDC7690FB6DD7A29FC764F88EB3
-:10039000B5F327937C89E7513CCCF46052C9DE9ECB
-:1003A000583C5CDE467943C7496D23D3486A62B93D
-:1003B0005B3862F77E6590AF117C3C0E2E16F275AD
-:1003C00051D6FF669B98B85C03A723D1FBD6225B6E
-:1003D00033E45BD17264522ABBDE40AF3D33F66634
-:1003E0005BE8F3D7007FC5D0D1FBCC7EECC71F54B0
-:1003F000B6CFA6F7E2CA5CC007A7143DD53EF1EA26
-:10040000E5C7AC4FF6D9BA6723D5BFAE6C3BCECFAC
-:100410005D6E86435E879231F2B44E0D5C679F8DB0
-:10042000104427E9DCC8093907A3597D75FBC4EEE0
-:1004300072F43FD414333F6C875793619D8FC9CDBD
-:10044000236A3FE6E3DC456BB7D1760E6B72E60AB2
-:100450007A3FD3CEE4F170D01A37FF79A69DE1E759
-:10046000756AD34CA093B4AF453D6B91E426D07F21
-:10047000E2BDBAF8DCE68EF879A555D1FAE762FD5F
-:10048000FB68FD801BBC3CFE4E5C9971E3EDBCDF5C
-:100490006142EA405F1E4B33FA9B3E3B9BF7E646C8
-:1004A000EBAF8FAD1FF3B366E3F30538CE2FB0E7A4
-:1004B0000576A617FE3C96D726F828EA5D1AAD6F9A
-:1004C00029D6B79F7D976FE7EB069C6E81F3CDF938
-:1004D0004F35496C3CA2FBFA08DACD528AC3F17C55
-:1004E0008548E830DCFB09DF9729319CDE95C2F6B0
-:1004F00031755987F09C85EE4F3E7E07F66B2A8A50
-:1005000011DFDBB8EC2897F7C850AE34FB8223F636
-:10051000DC8172FEBE7BD8B8AEAA73BC7390F07C4F
-:100520000D5E9F3F419C4BE0F80E5E3EBA0ECCF64E
-:10053000294E1A60FB122B5CFC9C88B46FA35F2DC4
-:10054000F47CEB276B199E9FCAF7AF65EF9163E9C7
-:1005500051383DA5CAFBDFDC0BFD8F1017C659C310
-:10056000BF73E4D07EEBC7646F129436F9193E8EE8
-:100570006BCB396E4D84EF8F4A81E7C22CBE69C0C8
-:10058000F94733FF59061C5A1A66EB4C151CD7570E
-:1005900028A12C981F6AB3593CAAE3625F16E2F9BE
-:1005A0008F3371BEB84ED985FD9EA20C619EC43CAE
-:1005B00013FECF1A20E837F8A9DFA0C7C12D357286
-:1005C0007635ECCF2DF5B0FDB5A55E56BE8BB61FCA
-:1005D000A4E52B2FFEA007E0FA687C6FC429E59EF6
-:1005E000A12A342326DC7FCD783A9BC5A52A4C7EF0
-:1005F000829007CA0FDC37DFA13C68073EE4665BE8
-:10060000987F30D5B21CF846ACCC3FD8EAFA961D9C
-:10061000FD03FA1EFC830AEE1F545C8E64817F602A
-:10062000EE8F90AFDCCB1FA37FD03DF431F239FCCD
-:10063000C99E2CB0CB228F5CE07A513E53F11F0152
-:100640003D2E37E17C9BC0F9C36B09E0FC0AC588ED
-:10065000F36D5CCE2A38CEEF80F52E90D7B399C7D4
-:1006600073683F0E0A9C3FEC32E0FC52CE8783A0B9
-:100670008F3138FFE059B6AFB22B3BD780F347FC40
-:10068000C84F89F37D49CCEE081C5FCBF18278FF1F
-:1006900021B7E3667C6F7E7FADF89E70FC1EC5C5FA
-:1006A00046B9EDDE9E8BEB2AA52E3BCA6DF9406064
-:1006B000F801FA2A7378ED1F9F007EBB1D5EF8CC0F
-:1006C000C6C765DCFC4F13DE9F44228753416FF29F
-:1006D00059BE515AB60BF5A482EA496D3C7D30E310
-:1006E000FF6C366E554A8BC88B1B13E757682EC4B8
-:1006F000D98A527B5538DFAC5775F9B631FDD2AC8B
-:1007000024230EF30BBBA93C1044BBA93C1006FDEF
-:10071000F15F66F933DD9F7CDB1D7B9EC3566EFF68
-:10072000853D17FA78F0938F791E8D49AE958F1C11
-:10073000B1FB8A0F66331CF2332582FA7BF0F2CCD0
-:10074000E4D8389519E71FE438BF82E3FC8ACB4C24
-:100750004F0E8EC6F9B725C5E036E7E56588F3AFDD
-:10076000369F40F8AFB526FFF55DBBD17F4D24D74E
-:10077000FFC1E7F3283F8736239E5586D87CCAF908
-:10078000A9703C6B031C790BCEA3B83F5EE8F1283F
-:10079000BE5A3F32CC937E8EEF0E2A578D679B93C5
-:1007A00066272E57310E9EDDFA89DA8CFCE778B683
-:1007B00042E0D9BF45B262F12CD1180E3BF8CC25EE
-:1007C000ECC7C1348663CD382C31EE60F77E4DE244
-:1007D000EB30463C21EAE94821D9189F93DE46BE1A
-:1007E0007559FF12178F08FC61C61DC4843746EA8D
-:1007F000059C027860F88203F6C1761C93F9BEBAB4
-:10080000CF8A4322722CEE10DF75A5E8E8CF0B5C8F
-:10081000B2F593338833B60E113C3941E0128A3772
-:100820000E833FA7D3F93BC913A55FE01381374679
-:10083000FAA1B0BCD12E17B7FF09E2A09F373E1135
-:10084000B8C4CC9F8356865B3A2EBEF599F08A19C0
-:100850009F98E99DB76B474F2A2D373F7F08ED5092
-:1008600087B70FF799770DE766001FC6C72D7E5C27
-:10087000871F895372FC71ADB825115E4984330E10
-:10088000028ED1A238C68C5FCCFCCCCD262D10F7C1
-:1008900017B82691DE42B97B9D51BC93A81CB5DBED
-:1008A000888312D6733972AD38E84CD298388810E4
-:1008B00026372C3F28113ED9EA7569B1F9AA623E64
-:1008C000E9CEBEF00EEE2B1F50F17C84EEB3CC7E51
-:1008D00026C247874C7A7710EC85169DAF12F265D9
-:1008E000809DF3217054A272578B9FC43CE24B62EF
-:1008F000F344A2F5C9AC6486B31EC965FEB2F97DA6
-:1009000034DFC488A3484611CAF3FD7CDF65225C4E
-:100910004548C4C9E254417CBE8CFB9B181B9CC358
-:10092000F30D28A94DF9241FE685263B1BAF93B391
-:1009300025F40316C1732A4FFE6AB63E74BA88D9ED
-:10094000EB937E1BDAEFE3E7593E62770A8BB39EA7
-:10095000BC35C9BB9B92701EEAA5F3F0E9A4BE6248
-:1009600098F767887EA6B37E2E708457E3FAF8ACBA
-:100970009B2DC19CD1FAFD4832A7235DC375B606F5
-:100980008E3F619D306BE6E8FD04CF24E7209F2079
-:100990004F3E8B96DB62E9FB7E2E7D946461EBAA71
-:1009A00066BEFE99D3038CB1C5F0A131DFAE2751ED
-:1009B000F94FBA89AD4F7555DB301F270996D269BB
-:1009C000BDDB0A7253E2C991E897F9F94F9399FF99
-:1009D0007D7A6A04E7B1533CBF778D22050973B075
-:1009E000B09FCA8429BBB6D1A25F4E66E7D59CFAF8
-:1009F000F5EB18273A91C6F9A04B98C770126C21F5
-:100A0000C4FB5C5A08F665D2EFADCBC6C8FBE8F371
-:100A1000D716B0F53242245847833F7247F37B49DB
-:100A20009D8CFD5EE2DAFE00E8E3E9BA371C70FE59
-:100A3000E4C2610B01BD5BE22ABD179E77A7303986
-:100A4000063E036E5A52FDC56FC2F3C646E3781CDC
-:100A500049CE65E7C8286C3C60FCB2668E6E97CEC6
-:100A60007E01353386FFBEDFFC9D1433AF88BC1595
-:100A70007B823CBE44FD9662EDAF1C8D3B4E2AD975
-:100A8000B503F6C73415B3732F1A3C2408EBBC0D1D
-:100A90005E12CEE1F285F9343DF96C5F10D7AFB448
-:100AA000925D6DB910A71C56D8FAB3693E29A363AD
-:100AB000959D0E7173363E2767CBE8D79595305CD0
-:100AC0005FC6717D83DE82EB7A8D8FF66CCF85F702
-:100AD00072768DDFC3D74763F847F6B338DC2293CD
-:100AE0009CA798E2FC655E537E20CFEBEB2A78CE84
-:100AF00005F2F3483A979F9912EAD1EB92E7D1DCDD
-:100B000098F9A83E59E41F118F35463E46E4818F7F
-:100B1000AF99EF89F869E693592ECCFC3E9962E2D1
-:100B20005702FE27E2775989FFBF94BFE7AC362B07
-:100B3000C86DB7F5836CEE0F1139C69E98F9764EE5
-:100B4000F3A4809D383DCCE69B13533D5FC173B049
-:100B5000A81EE3399E5C1FA2E340F5C119ABCF6F1D
-:100B60004F037DA67266857A1A75494F02FDDBB781
-:100B7000F501EC37E8A933AA4766FE8FD23FFABFEA
-:100B800022E8CD1BAD47E6BCB14FAB7FDF017B0E4A
-:100B9000F182640FF24FD8D346E2FA4AEC3E56B1E6
-:100BA0009EDE9DD3DA04FBCF1B062C78DE4FC7F008
-:100BB0008BCA0AD8D75A27E1B4A6913EA4576B63D3
-:100BC0007911D73FFB3081BCF547A7122FD82BAD49
-:100BD0008DE549D0F798272170BD38BF91BED75910
-:100BE0005E88F19CA514AF31CF67F16025AE2FF47C
-:100BF000F0738F46FC0B22E4D2B8BFA5159E4C8E35
-:100C0000EE876ABB18C2F84C4782FD2EE26AF617DF
-:100C1000CCD723877EF1CDBD905F91AFBA005294BF
-:100C20000F87ED50DFF70B0FD5613E5B9DE48275BA
-:100C3000B7231FB76F86F38E1617BE1737BFE7C0EF
-:100C4000B9A7BCD08F03D61DDE74B00F9BD8BC955E
-:100C50007443E1D41563E0A3409DBF2E6746E27C58
-:100C600092D50E1EF7EFFEFAEE47607D7B50F582BF
-:100C7000FF52CFFD8E066547F30A3A9E3DF325EFFE
-:100C800046FABCE7C627D61E8238EB5915384E7A8D
-:100C90002FEEC9063FE3B567ECE87F1EF978CF4F2A
-:100CA000309F64509D03FD1DA17FBAC6DE9F7FE982
-:100CB00018D899C5058B8BA19D2485EC0079BA6E57
-:100CC000B8FD1D3817A161409D0DF66771DD2EFB43
-:100CD000D7804F75BFB24F07FF63D85303E3999D89
-:100CE0001CD01D541EB30A73BE9701ED7889574777
-:100CF000BEF611E0ABC84310B85EF8931DF3735213
-:100D0000480C5F4F0FE7A6603CB28EE72BCC979B59
-:100D1000C03F3EED9A9E8271C83A96A760E6D762C0
-:100D2000C0E9A9405FCED49571E6EFDCBABF6C088C
-:100D300040DCF7465B733C7E0738BF93FEBC7237DE
-:100D4000F437E9C77617C0EBA4047998790E1E8FA3
-:100D5000735F5D7C44E019CA57BB3526EE47F1FE50
-:100D6000D71C3171976B6DFF4EC8D99E0D718AC02B
-:100D7000FD504F198F8F94F3F84822BA4AC7895B08
-:100D80005039423E2D86B8C52DEC7A03BDF6D4E726
-:100D90004C35C42D88EE063B7B1AD6E1008F298B9B
-:100DA0003638601DEE1C8B5F2492DFC5F97BEE3C6C
-:100DB0001463EF7AAD7A36F8B93D37BE8D7ED2FF37
-:100DC0002EF91D91B3BA5FB5C1F959DB0A174F046B
-:100DD000FB1723C7CF00FDD72AC766FE75CCCF4BC4
-:100DE000215A549E851C8F964B09FD5121DF89C6DF
-:100DF00003CA813F2AE43C51B9D3F36F882BFFD15A
-:100E00007A86C6D4832F38187E0938D8FC524E749F
-:100E100017D8E17959EFA0DFFA0AB7C7237292D247
-:100E200077E7FDD4EE049FB7E37A79D74515CF591C
-:100E3000EF7A6ED5CF60DEE819AE749DC179DCEF34
-:100E40005A42E9BA11FC87421C9F1E25264EF827FC
-:100E500087F01F8C79BDFFE2FA63BA9FCDB39A9FEA
-:100E6000F2FB163E4FDC94F35C32CCE7B7F07D1317
-:100E7000333AD5B8F3328710A430E3750B40FFC284
-:100E80007DC672DAC83EF4760BAC03DEF482E93D2F
-:100E9000DF3F6DCE83FCBDC3B4CFC934DFDA2F8E04
-:100EA000EDF7FE12E6270A255EE079BEFFC2CF0D00
-:100EB0006CE7E706BE08FB59E9751FEC67A5CF5F35
-:100EC00082FDACF47E3FDFCF4AB2AFEE7C7871AEEC
-:100ED00093CAF9D036396488878A7DDE1D706E1218
-:100EE000E001B7CACE9B7351B405F9281C2F5A1CD8
-:100EF0003EBB4AC755FD13C17C946F9DED4379D825
-:100F0000CEE759338E11E73A9AE952A37C54204E2A
-:100F1000D53535D0DC54C8070CE466F6A45DDB6239
-:100F2000F0B4A631B968E57E5BF022093D2F45CBD0
-:100F30009FB848F66C6371B6A00CB803FEA2225CA1
-:100F40003F4010C7D5176F45FF0B7020E0323C675C
-:100F50002C17F6A5BE8478AE7E78CEBD0CB7E8A37C
-:100F600070DC08DF64E413C3E7C5AFE3F9CCF50335
-:100F7000F1E52D9AC7D4DC931FB3FFA07138D0C818
-:100F8000F1912BF67C04D52457E67AD28A251C975A
-:100F900005053CDEC3D73FC4786E5EDB87F91EBD16
-:100FA000C5360FC417CC38D18CF3D562B65F4CB9B7
-:100FB0009DED5BADBF48303F1E0526337A0E9BCAC0
-:100FC000F3793B5C012FC4311BBC26DCCBCF912ACB
-:100FD0002F30E27933DE57075413DE0FB2F9701366
-:100FE0001BCF93E709FA51CFEF64F181036E0F93A2
-:100FF0003F1242BFA7C26DB9759B07D6A9D83ECC98
-:10100000D26182F192D2010FEEABAE1824E1EB6710
-:10101000E079C36D789E90897F1510EA4D877A3C00
-:101020003D13219EA7902D708E4CA6BD45073D50C7
-:10103000DD6B71DF0DE4314C6072648FE5AF9A7C3B
-:101040007C33A840058FAB89DFA79864DF8B7210D3
-:10105000337E63AE87A95CEEC4FA969FD7EF1F6418
-:10106000796D663948B30F613CBE7258C3F39ECDAB
-:10107000E36E1ED74A2DF2FEE3B03FE362B2771370
-:101080008CB39D8DB3184755EE94611F0751D878E6
-:1010900089F52F73FCB5CCB43FCE4C97381761BDA2
-:1010A00066DA2FC6717C25A7AE2D69AFE17CDA4ADE
-:1010B0006E6746E66D7B1E5FC762E7991E181C7B54
-:1010C0001DEB808B9DEF475C8BC7B17B9B98FFCD61
-:1010D000CF11282B21C98073CA060993AF472D2150
-:1010E000474E6CF99061FFB87370593D9EC7E87226
-:1010F00055439CAD8CB0F54A7D80E0FAA54EF6CA0A
-:1011000081987E89751095C7C55489F54BF0C94CF7
-:10111000DF5DC3467FE82B41E3BE873B1F36EED33E
-:10112000F8D2DA2CC3FBDA557986F7359E9B0DF79A
-:101130005F741BCF09FA42C0784ED092E62A43F979
-:10114000454DC67382EEA8339E13D4A0DF69D25FEB
-:10115000DD20DF5D52DF0FA1FF16C7EFF3C68A0760
-:10116000978FB76E1C64E706A11F1867BF8B795F66
-:10117000DB079AC00B463DE809FAD9B93A039E9DB0
-:101180007E7A7F8878157470F9F941358495AB7152
-:10119000B3F596EA8CF8FEBCB083E6F50A71FE5F03
-:1011A000D9601FCA41B9E9BCBF52F7BCB8E779BEE4
-:1011B000A771BC20CEBF4870CEC5A8F9FB6AFBC79B
-:1011C000D799C6ED1F6FB794F41D76E624EEDFD5F0
-:1011D000F66B248F0BCE1DA4FCE8834793D97B8D3F
-:1011E000EADB96B4023CE722C35E29A54C8CC63BE1
-:1011F000893EEBAAF2CEBA791C9FE84BAEEADCD26C
-:101200000CBB87E9BFCEF0D116490FC13979E6751D
-:101210005395CFA79322ECBC0B1F3FEF22690BD154
-:101220000B298B829504D7F183B9F6D06609F2C6F3
-:10123000D97ED2D61B2D38FFB40EE93BE0772DDAEC
-:101240006E54703F638DAC6179359BCD4F3EC8B114
-:10125000877C89D7F466C3391DEE4D2ED013F52750
-:10126000EC7DA2FE744E569BE3F90BC5294CEE4F64
-:10127000294D8529281FBA9BAD4784F0DC33917F27
-:101280009B28EF96024717DA6D22F0011BBFEFC1D2
-:101290007A4A1CFDF5A730BFD8572885AC9047BACD
-:1012A0009484AC63F8959D6E4BDC78C64D29DC5F69
-:1012B000BE7C05CFB353C5F97A59EC7CBD6ED3B96A
-:1012C0009537F17E1E4AB1E3B53B670FDBA76A3A5B
-:1012D0001FBDDEB392C4E25971CE8F1A790FE34C71
-:1012E00027C7395F44AC3F6DE7FB97AB2E5A9AE2B4
-:1012F000D1FF618A82743CAF59E3F6EF5B9CDECE8E
-:10130000695E3C57B5F5490B9EA3EF73B74EC1FD1F
-:10131000DD295F232CDEC5E8AFE77AEA73873693D1
-:10132000145CA77E1A7E27442DB1412C8F9CBCB142
-:1013300005CF85DD0E797339D1FEA58875EB9D87C4
-:10134000EAF28AD9F9F310EFA91D6079E50B4B7623
-:10135000F13C927EDCAF68FE9D92D2BA800EF3F231
-:10136000C2C6F066C43F5E8F1F7FB7847837E2EF56
-:10137000A88CDA57A921EEEA1C6672DFF9736F3781
-:10138000FE0E885BE046BDB126337A3E58F9D0A107
-:101390002DB004633E1FCC7CBE90F0CB5413AE1432
-:1013A000FE5803091D56A4D171E644FED863291CDA
-:1013B0008FDC48FD313AFE77D9583EAD6FBD5402FF
-:1013C0004E63D27A6932D8AF1FF1717AB33C80E7AD
-:1013D000B4B426D8677769A45C18F73375E604DCE3
-:1013E000DE31CADF9422B37D7997D9F91EAA9DE533
-:1013F000718D5C79FE8B90EB594E1B962F7132BD2F
-:10140000A8B8F242D658F367A92F40A03FD4BEC473
-:10141000CD0F7B3185ED4754C3EC9C0AB5EDBDEA99
-:1014200078FA2CF4709DDAB40FECC716696D2809B0
-:10143000EDC0D59F5F798BFCD9EDCD654D3F9C42CA
-:10144000FBFF9AF5471ED08FCD01E3EF4B89EB6B85
-:101450005AC08EFC771F7280BF793E39701CE886B7
-:101460007837EC23EC8CBC68477B6AE2BBB99EB54D
-:101470004EC677D5C3DE937FD33D8B63E224754E92
-:1014800089CF1FFA5B40D74CABFE36B4F34865FCFE
-:1014900075C84CA5F21D785FA935FD01AE9D91DDA3
-:1014A000183F4E4ED6FF077C5FAEE8FF0ECFFFC958
-:1014B000AAF7333B5DED3A5310DDD790689C61E1AC
-:1014C000E24C412CBF3E1B9F33EC4D436C9CF5809E
-:1014D000768DE3ECA4D72FC1DC429FF797C75F6FEF
-:1014E000FF119727AA6798AF20F6BDF8DC448F3725
-:1014F0007F89F274FC6527E6B5079B20AFF3E414FF
-:101500000BD91D63E7C47905AD11E6175E7848DA9B
-:10151000CDFC4282F73FFF7ACE6E58DF5D3A8DEB0D
-:1015200031DF7771F743C6FDD0A2DD39A97CFCC756
-:10153000D1CF365E6E732AD3CF1FA4B278D855EBC5
-:101540006706AB47E8A9AAB0EB5D2E265FEFA7B20E
-:10155000AB2D4D12F9EBD3810F540FFB53AE6D7CC5
-:101560009E5A92F7D9E543E883EA35E6E76DE3FA58
-:1015700022EC15A5B3D4C9EC4520F9DAE8CC2CFD52
-:101580001CE458EC3F901D92211EBEC0C9E3955C3F
-:101590007F4F29FA42A093EAEF1D285F89F57789EA
-:1015A00093E9EF179C46FD5DE664FAFB4527D3DF20
-:1015B00066E767D0DF0FB8FEF8791C9F1C37DA1D8D
-:1015C0008A8BEF81FAEB1589EFE7267F9462FC8F17
-:1015D000FA8100D1D964F95C2C6EA0F855C7FD1BC7
-:1015E0006F1AEB7B8B8F17B563F743BD6F41FBB46D
-:1015F0003F9BFF3BE31FF0F1C5387A29F828DB5AFF
-:10160000DCB0FF35D13CB7C0C9E619BF8DEDAF20C6
-:10161000C768FB4586FE7C17F837D29F20F5ECE2C1
-:10162000F72718B73F7DC6FA62FAF308D42BFA53AE
-:1016300071E5F898FAE813FAE80ACB306FFB94F8F2
-:10164000F342AF93CDDB1F3AF427A17EB37C89EB45
-:101650003F727D48B40FE69452F98FC0EF5285D99E
-:1016600041A285FBE598FE9516B4887E072CB171E2
-:10167000B681F876F217CE11FBF00B94BF9D6CDFAC
-:101680000E95EB5FC2FD5D135CCB709FD747CC6EB0
-:10169000BEF5C97A6B1A6DA739E389EFC1F51D67ED
-:1016A0001AD2DB3294EB8461E82F67FB1F5B27B310
-:1016B00073D35A25E3F969EFF0F66EE2F6E91AF40E
-:1016C000FBAD5CF9D3EBC767B50B943F2784FD4CAA
-:1016D000CABB36BB34FB73687FE93482F8B87597B0
-:1016E0008AE76C09BDB90BC6969D77A0431EC55706
-:1016F000E9BD85DE0F81D30DF62A9B10F74C2C1720
-:1017000054F13C04FD3F983DD2CFC095DAA10FB80B
-:101710001D1A802BB543673F8B1D3AEC6476A88D6C
-:10172000CA501FC8A11262F9BDDC9FAAE77D2D2D0A
-:10173000386C88DB097FAA7360B71684BCC102B617
-:101740001F3551BB61F037207125C1EF5689ABFFC2
-:10175000C91576700236535C077154F13B7A9DD0FF
-:10176000BE06ED59F0777E5E2332AEC39BEB6B9DD8
-:10177000CAE7FD142ECF9357A27F65FE1DBD2A77C1
-:1017800068FB4C5A8FEFD8DD6C9FD5E5BBC9B22200
-:10179000C0270102E76DAAF40AF99B82EE69A9D776
-:1017A00093D8DF235689A4CC2B8CDA91AA08095749
-:1017B0001423BEC1FD5C508F87D7132882F93E4D9C
-:1017C00081F5BED712FC1ED39372607A6A4CFD7EFF
-:1017D00062C42B74FCAF4F9D8DE37F0394A3E35F42
-:1017E00090CAE6A11BE1F95927B37F4FCA4D85F096
-:1017F0003C90C196A069F9225E7E46EAE720279BCD
-:1018000009FBFD5D90DFD8F5EADDDC3E744C0C94FD
-:10181000433BD53F5FD433857EB2BABD05CF39AEE9
-:10182000B82EF2D129C8BFCD52713DB0F551E33C7D
-:10183000F21CFFFE40AA88DF5D1B8EA0F6AF3E15AE
-:10184000E963F62FE866BF33DA3239F731061FA9AC
-:101850008399193DBFB6DAB508CFE7FAC60B39331D
-:10186000E1BC2B95DBE779EE6E75058C6BA43F6EC2
-:10187000BEE95746EC20B5DE86792AFE392FF7A758
-:10188000325C4BF5F8AB7CFCEE023A5F9CA8075249
-:1018900067FFD7D9476187020AB337D46F0A82DF5F
-:1018A000B4ECD2DA23304D3593276A607D83CAE5E4
-:1018B000DF019D5FB6EF3DC27E7A303805DAA5F2D2
-:1018C000F8702AB3477F9FCAECD17752993DFA87C7
-:1018D000CF2267F7A69231F1A7C0E1027F533BBF49
-:1018E0002D95E14F8FF3F3993776F2FA02CE6B9C88
-:1018F00037BEF439B44FF1C6CF505F391F12E1DB68
-:101900005F70B9FA65AA88FBE9BF04FE2FB4EBFF4C
-:101910009C1A8B370A8FFD11F2E4A278A35BE6785C
-:1019200043898D67FB28FEE27975F758E644F54454
-:101930008DC4C721F353477048078EF7768643E678
-:101940008FD0ED1D08811E4EE1FAFE3B668F5BD401
-:10195000FE7BF01CDC7446B794CEC6F128EFC7BB03
-:10196000524ADCF8E6B1687BC7B0BDF5AC3DD97131
-:101970002BFBDD0F6157AC12B623E2C3F3D3D9774B
-:10198000A29D79FC2A70AAB99DDF46DBF92DB6F33A
-:1019900090D807ACBF05F7BE285FC3B17C05FB62DA
-:1019A0009913C34F8EEB12E1B818FEBD8776A08D58
-:1019B000B533C2BF407C3BBBCC250B3919481D4316
-:1019C0003ECE71F9381F958FF35C3E3E4C457CC28C
-:1019D000C6E1AE09C6FDE5C35CAF1EE17C12E3655E
-:1019E000A6BF95BF1FE187E7D873B1B8D65790B6A9
-:1019F000AC19E2966DB2D7E2192D6FF45F3EE0DDCF
-:101A0000FF05CC52B1EF0080000000001F8B0800E2
-:101A100000000000000BE57D0B6014D5B9F0999D26
-:101A2000D9D94DB29B4CDE1B48C226800D1A7009D5
-:101A30002106083A79F20A10111014617985F04AEA
-:101A40002262EBF36731213CD5E8556B5BB40B8226
-:101A5000628B3660AA8801372088EFD02A68F5B6F5
-:101A600041ACA0225950EBDADAF29FEF3B67B23378
-:101A70009B5DC0DAF67AFF3FDEDEC339739EDFFB83
-:101A8000FBCE37B34584FDC927BD923B9790B17E0D
-:101A9000A27A6D849C83BFAB82A555110849266448
-:101AA000995C655586D20165F5CEAA8184B4977498
-:101AB0002EA90AD3FFB604DA9FF69B9EBEA92CD9A5
-:101AC00049FB7B687B0A21C31DF4DF2221D7D5B4F3
-:101AD0008B6EDDB8E99F7E3C4F0D33CF4F124CB873
-:101AE0006EC30CD721673E9DC661726D253DFB35E7
-:101AF000C7CBB8DEA86CAF1447FBBD7986289B69BD
-:101B0000BFEB260BAA979EAB829FCB96C0CE91A52A
-:101B100048D85FE5FB1C2577CE0B778E7CFE7CB426
-:101B200093A82D749ED10A517786E95708FB8479D2
-:101B3000A2C3CF338DCF3386B079429FCFE0FB1A5B
-:101B400055127EFC083EFF34C78EF20402FBD964B6
-:101B500006F8E599D5610A1DB736021E52A4929186
-:101B600080AF280A3A731E2133E958139D6016E0AE
-:101B70009C960F8AEE5278EEA6E070E40125787A02
-:101B8000015E4B6C6A19B44747ABE530FF4849AD7D
-:101B900080F297667514E29FF80829206402A79FD7
-:101BA00009569B4F8CA5FF28349FEAB4B2B673D96F
-:101BB000F0FF67281F5F4688407CC2B9CBA0EE15B6
-:101BC00061FEE1CE43EF0AB4FF706DDC4929645C2D
-:101BD000BAF2710CAF8BB82F84CF6EF34F9D365392
-:101BE000CF736AE56E9BDB0A70381DED9E09FB6CB6
-:101BF000706CB63929BC5F75B7585DB4FD641C4183
-:101C00003876C5A86E7CBE9BD4B4D0763146A86F1A
-:101C1000D1C16FBEC2E05DAD30BCBD25A9D570FE9F
-:101C2000095675018C9B9C49F144E79D95D8B95C98
-:101C30000FF77A8EA7859C6E67CAAC5FE83EABF95A
-:101C4000F32249F0C4C09E6C873E12813F48F75F83
-:101C50003F13AD8F857F51FE293AA94C9D96447163
-:101C6000B6467499685DCE11C2F2E99D7CBF944F6F
-:101C7000EF84FD1227E5533BA50F393C7D7CC5FB66
-:101C80009747A0CB3C7E9E32781E66FCA59CAECBCF
-:101C900092DA4542C717717E0BED373741C47E0D8E
-:101CA0002E323ADC3C0F04E5CB03485F0ADB779E1B
-:101CB000B9EA21A8CF500E97C7D3E6E2BB93A6920C
-:101CC0002480878958B2104E5642E1247138D16D74
-:101CD00012A82FB3B2BA14BD84C4D132D3E15D3F90
-:101CE00008E0D768763969FDC3931F8A84D2D9D6B4
-:101CF00007CE0A84CA8BDD7E4212B3601E19668449
-:101D00003FD339A1E77CF49953D2D6A3A0B9F224EA
-:101D1000512D947EAF2CF44F22B186F1E41C9DCF5F
-:101D2000E6EFF008803F2BF1C45C8E64FC76BF14B4
-:101D30009C15E74BA5EBC279E42F8917CEA33ADCBB
-:101D400095641021F1FECE5FD461BBCD350ACF453D
-:101D50006CC06FC1732E43FED3F625DB3A1FBB97D1
-:101D6000F66FFB2ADA75179CDB5FF109DB0FF1D800
-:101D700081AFC54A17C877422CB83F13FD0FF86CE6
-:101D80006480EE3787EF1716C9D7ED9FF43CCF83F9
-:101D900062D521C0C72C2B5163F3503EBC02F5BE67
-:101DA00066DA81C2B14911BC1EDAAFE981796BB242
-:101DB000405E6F905CFD09D039D925503A1F41D75C
-:101DC000BD85CA1DB990D8145A971DECFC4D7727D4
-:101DD0006D8A11E0B94465212DFDBE6F040A875854
-:101DE0004775A542CF21F3F102051C8C179C0A9977
-:101DF000910774DB2112940F0E8487C63FEA8F8807
-:101E0000F0B115550D01FA2A9388C74AFB0B0E361F
-:101E1000EF95C42F92BE8007AA086859425C58DE2D
-:101E20002BBA3F06BEB1CA14AF74FF5693D5BB524E
-:101E300000FC55BD3E1AE15EA67C9C13946791E4BC
-:101E40001040EE630DAEE2F7977BE5CBC3F3D5DF31
-:101E5000827CF3372697995E9E9CCDE4CE017BE78A
-:101E60000C3DDFAF5298DC59C5C71189F1D9325901
-:101E700035C59F87CFD7F2719782F2017D4CC2F3AF
-:101E8000714B3C930793EFF236F5A2F09B9020B88C
-:101E9000400F976F9F2DF57606FBA5727DA7A4A82E
-:101EA000F1F130DF6ED7496F12681F19F57BD37BD4
-:101EB000641ACC3F9BCBCF009FF72FF16C1FE9BC7E
-:101EC0007E4CB04F0B0797CCF86EB864C2B9889BB4
-:101ED000C1458C19ECF7D175486FBE8E59C075DAC3
-:101EE000B3997CCCE6FBD2D6E9C3E51F95FB97C03E
-:101EF0003E27677AD3A1DFAB66B6BFD0750706D79A
-:101F00001D88EB2E61EB8E05390FFCEF3CF412C8F7
-:101F1000F9224EA763FD6E02760FF0B0A92028EFDC
-:101F200065A74FACA7ED4511E4FCF0E03AC3719D05
-:101F30007A86C73D29EA08D827B50B8AA0BD3D5B44
-:101F40004179F9662F13D94CF972765AF63D20364D
-:101F5000B57976F273B6673539E6507CC97EE2B260
-:101F6000209DD7A0DC2BE2F2A561B79BC0734F2F59
-:101F70002A3375E365FF1C2BB1E151FE714EEB4F27
-:101F8000F9A8C99F1DE70E8317AD5CBF828922E2C5
-:101F90005C8AE396F171A1FD6C0FEE8B81F93740FD
-:101FA000FF1F113291EB1B7A60DCDF58CE3B0DFE38
-:101FB000CD319DB4DFEE9CB986FDE073CA474D3943
-:101FC0008FC580BDD49641F500C8A9574494934D60
-:101FD0007686C7A6B46AA2B7474B1D3EF16398E761
-:101FE000DBB9642AC55F91C34D2EA1F05DC7F751DF
-:101FF000E4AAF60849D8FE6C149D6779FC250847C9
-:1020000039C74D2A72012E5E524DC7CB8A4F74D10B
-:102010007AA99FF8AECA87FE54CE0B6C3EA75D3FEF
-:102020000F698179E45C460FB2BF8500FC769F3C66
-:102030003F1C63724C06F9ADF125B5EB56001D94BB
-:10204000295797C5D3F9176DCFCA13E9FC158E76BA
-:10205000794E2ECA6D0FD0C7CE647565FCFFA03DCA
-:10206000378D78CD80F751994C0F4CA815BC9B2922
-:102070007C9A42EC849FC6333E2C0CCABB9FE1BEC7
-:102080000B353B41FD39D4CF63073F0AF0388F1D34
-:10209000BC059E87B183B7423B85D7E3F1CC0E7E6A
-:1020A00002D6A176F0B6EF03B7090A93A3D40EDDEA
-:1020B00001F3C6837103F6D11F983D1ABAFFDBF80E
-:1020C000F9D7D0B376005D4A5E89D139E3D3E19C7C
-:1020D0004FC79EA4FC92DB93FEDB28FD7B28FD9D71
-:1020E000A576939815999E7C17C997C50F32BE6F38
-:1020F00070EC43BE7B91F3451B5FBF2D47AC047C66
-:10210000BE4A4445147ACED794E176805C0FE53F11
-:10211000F55B233D973ABC1BF2806F0ECD75C1B6BF
-:1021200042F951A665F5C0E0BE8F031F0ED5C92741
-:102130002248C88F17E04398C73D10EC8C7849CDF2
-:10214000053E62EB7A0E89A82722F111A59B5380E8
-:10215000BF6EB800B075FBA774F3393CA77C76FA64
-:10216000FBD0CB1A4E1FD40FF91AE6EB1FCFE8674E
-:102170007604FFE21FF1DD7EC03FA03F99C1F4501D
-:1021800066BC938D234932E81755CCC804F942E761
-:102190003525D0F6B7B87F1469DEA8846EFE8B4A69
-:1021A00080F3DCC2E63D0446F6D09EF38E4AA0F6EC
-:1021B000479879D2B81CBF2E82BF90C5FD1292DB22
-:1021C0006D9FA4C07A599C6F7627AB8E041DDF14D7
-:1021D00071BBE565C1A89773BAFD7DC63F4909ACDF
-:1021E0003F99D73D6F56820E9E9A1D309BCB076D4F
-:1021F0009EFE9CFF9C090A1B5FC3C6C7439D8EAB16
-:10220000E0FE13854B2ECC47ACECF985FCA27B1489
-:1022100019C7CFE5FB12E2154DBF215C4747F2BB62
-:1022200082727038E2C1C5FA5FAA100DEF23711FE8
-:10223000956C1F850AC37B68FC20127E34F8276BDF
-:10224000E7CD61F3134F37DC46EBE92512DCDE8A7C
-:1022500063F6C5280E27D2C8E7099107774B1D56AC
-:1022600025CC39AF8D771AF8D9EE32CA8748F19468
-:10227000BC207C66221CF2D9BE23C5570AF87947D8
-:1022800070FB968E9B8F70B5B1FDDEA374B7D7E05F
-:102290007CE96CBEFA20BC1763BB83F58FE4F7D7EB
-:1022A000F37D5527748F5B86EB24B171A1F104ADEA
-:1022B0005CC2F7B73038EE565CAF1F1B971CDCC70B
-:1022C0001DD83E9AB57FDFF85B32DFEF4F82EBAE71
-:1022D000C1FDAAECFC81B86EB8ACC7F622B66E247C
-:1022E000F9118863E768E270BE12FC623A477C80AD
-:1022F000E44849E03545BB46D12EA901D507FAA3EC
-:10230000E44BD90972BA5CB479042A8F25A715FD6C
-:10231000E42889A8E0D7B67FF56347672ED67DA06D
-:10232000D75747155BC1EF5C9325B9401F16DF27D0
-:1023300031FFFA9409E57D85B804E7D9A76876EE00
-:102340008D063FDAA9382BA3601F56913899FF5F9D
-:10235000399E3EBF8ACBEB7DD64413CC372283C552
-:102360000BAE7256A3BF4EBE657EB44AFF63F25BEE
-:1023700045BD2CF371527A3D11B034FADB32D9707D
-:10238000461C847A01EDA8117EA3FF2D3B2B4EC085
-:10239000FC32D18DA3EB3E9F604F427BAA1FE97FA9
-:1023A0008EF28F25472016EA5F944BEE3D808731F1
-:1023B000CE6AA5849EC792EEB6821CEE67F6F586BD
-:1023C000784263BAECF2001B3E5066CD027FAB99B7
-:1023D000FAE7080735E1EA81413C598A540274481A
-:1023E0007182FCD55DDA589990C8F0F8498205CB26
-:1023F000125ED79E87E27D486234E37F62F57C946B
-:102400000372422071940E9792CE4CA0C7E43426FA
-:102410009F6A4D9D2950EF22FE94245A36344BA3D7
-:10242000C3F93F1B79FC6CAD29BCBDF44BF3980F8D
-:10243000000E12C40D2EC7B880DBD237183FD0EC87
-:10244000552D8E10C96EBD57ACFA18E61114DF3742
-:10245000D0BFA7FDEBC17D48E94C4E6BA5B68F9967
-:10246000898C7F1C895684CFDE3B4AC91C27E2E950
-:102470002CF029C5D3A12B002A59F314C0D32B5912
-:102480000FF583B89435EB8124E0CFD184D9A7E54B
-:10249000748C83960FD9DCDF24E8E4E1987EB3D115
-:1024A0006E2ACAAC477B6A7504BFF4C77C1F12A7AB
-:1024B00093129BDB943814E25FCBAC305E52AAA23D
-:1024C000A1DC1B988425B57BA544DA7F753AAB5F08
-:1024D000080FEF72F91069FFA3402F40BC26BDFB27
-:1024E0001C09303F7DEE91F382E7D0ED2F25DCFE15
-:1024F000CC894C1F69FB92FA71BACC31D2DD784E8F
-:102500008F39899ABF78D17477E462E82EF4BC637E
-:10251000B2968F1E4082FBD7CEAB9D9F9ED705E71C
-:102520002D97D8F9B72A6E15A6A0701E0CED3DCEDA
-:10253000650DAFF733124DDFF53C0F25F4BDF8F311
-:102540007C8779A7267E07381D18A93A409E342635
-:1025500053FAA4786A1458A9F58FE6786AE174FAF8
-:102560005DE444FFEF70BE6287F012E8C3ABDCC7E6
-:102570004A6199B2A2C1A076801FE701BD95E4DE51
-:1025800027CDA1F5A63BE6A2FC3C30B21EF7BDDA92
-:102590006EDCAF5626707C1465AAC87F8D9CFFCA7E
-:1025A00009F323B57E6DFC5CA1FC113A5F285F3F07
-:1025B00064536F06FA484864FA32E8FF75887AFF78
-:1025C000AF84EBAF91D69B0CF18F91DCFF5BFD6587
-:1025D000B6CD430F7A96EAB57F89FFF70D7D027E6F
-:1025E000527A8955EFFF355A4BB17D75863AFAF22A
-:1025F00024D0C7A2EB2E82F0437FD02388CAD630E6
-:10260000FEE0EA0CD977157D6E51C8E3B0BF52AA3F
-:102610002F21FE62515472C9C09E7EE13E6B29811A
-:10262000B8C959853C0BFED885CEF378A2D12F943A
-:10263000C02FE4F3A35FA8D4934E8CF79412B06B31
-:10264000A0DD3910E48E4ADC76D023D42FD4C9A77C
-:10265000B3D69B90DF43D7A372EB69A0A34685F165
-:1026600071A83F28723ED7E46C283D943B18DD44A6
-:10267000D1AD9B99DC782E31B9275D7C77F934AFE9
-:102680000C5C806BC9CA03E0AA4D09F825707996E5
-:10269000273AB15F956D47233CD7E60FC50F3DB98B
-:1026A0000AF174B06758FC86DA6BD48E32537B6DB6
-:1026B0009D105C7F358777247CAC067D1D868FDE80
-:1026C000EE966BA171A29B8CF72F8A872415B0B868
-:1026D0003E09037F91DB496B28BFC0FDCD6AB3CBB8
-:1026E000A1009D6614BDEB067F3E43C6FB0822D5C4
-:1026F0003BAEB6F73CE71A889F85D9DF17890908F2
-:10270000576BBAC9609F1172A7C17E8C746EC2F7F5
-:1027100065E6E712009E397A78869CBB4CC17383CC
-:10272000590FF3C69A5CC447F9223693B85060C576
-:102730009A300EABF1B9C2F95C930736858DAB4C7C
-:10274000EACBEEF7449B5FA4E75F9F44ED693A4F05
-:1027500083BA0FF5AA363E8E9FDF3692C51B6D7683
-:102760009FA28481C3BD9CCF239DB35995E2CBE842
-:10277000FEEE5598FD2D8D345579311EC5E2B50A12
-:10278000879D589C6F05BB7D54523C8B7BA93B15A4
-:102790007DDC4AE4FB89B1D3FD9C474EAE0DD94F99
-:1027A000544E6719EC5FCA529578DDFE4B9234BDEA
-:1027B000D281FC1D69BEBBB99C8FEAE7C2F8ADD5DA
-:1027C000E6F2C1BD56945A5D0062313AC745E6EA69
-:1027D000DAA3D58221161D1D3667C861EF236EE787
-:1027E000EBDB25B50AC6D91589C03D999DDBCB9198
-:1027F000E68DB48F0BAD372D89E9D31EEB39C3DBE2
-:10280000157D9218FF49237756819C260325D23FD8
-:102810008C9E484862F22556EE7482BF4EE9D11D67
-:102820006E3E9224737EFE37F187667717B71ECA15
-:10283000A6FB6DB0492E01E457E1C90EA70E3E5428
-:10284000AFCF4AD2C97DD1E646F9263AD9BDFB6859
-:102850000BF3B70F8C34DE93CDE7F8FA80C33192D7
-:102860005C28E2F0F8779DF3BBE2AF2489C97D0DC7
-:102870002ECD001702FC757F6343187949E1D39090
-:1028800094FCDDE1B396C3E5E90BC067D07F183E49
-:1028900017E2EB209F79C9F130706CB0CB69730DF2
-:1028A000FCDF8C7648B87ED5BAF346E2438D3E20F5
-:1028B0007703E1D0AC1AE2027292A783F995371B35
-:1028C000F59CB8C4C5E533F996C22D9EF78FB711B4
-:1028D0005F4C6C707EB9CC184F684BE27181281246
-:1028E00005F039EB9A24409E82C53463B0920D4BBB
-:1028F000340BA02752609E4184DCC7E567A81E4CBC
-:1029000056999FDC9BD40B4CAFA4E3FE92F83E4259
-:10291000F5601AF56B201E0347047FBA37AD5BC123
-:1029200006212ADE830B1E13FACB0EE21560FE741D
-:10293000D289651F4845A0F367910EA11FC5DF7DB1
-:10294000E5D583417EBF13728E0BD9A35AA9D91F37
-:102950006BFF43F0FEF47F2FBC5796EAE02D267FF5
-:102960003F78CFE77227349E5704F1BC2C88E7F9F3
-:10297000F6039FCADF32FBA3FDEF32C6F71AB35846
-:102980003CAF5CAC7C18EF419D32BA1F524EE77AE7
-:10299000C873D2EC4ED4797D83713FEB99FB2588C7
-:1029A000A310E924C209EF869C28CF329351DE3070
-:1029B0003BE22ABE7F396B9E15EEBD83FE934F64CA
-:1029C000F606B397644E07458E12F45F1ABF3DBFFB
-:1029D000DD71B17ED25EE900DE5F6BFE51837F0E5A
-:1029E000FA4BA1E37C92EF7D38BFCF2F3B21DFA4D0
-:1029F0008DDF8BB59D396888D386FA419A5D751550
-:102A0000DF7FA9DF7DE872B8DF52E61016DF647061
-:102A100090F93A8D8EB3780FFEE2B726F4B7CE72F6
-:102A20007FAB08FC2C3BF377AAED3DCF392139BCB5
-:102A3000FF04E320AFAE54F18960CF69FE13B43BCD
-:102A4000ED3DFDA7D116FF6BB0BF09AF89981712F6
-:102A500009BEA17E53A8FE999ECCF4CE4DC9DCAE32
-:102A60000B81A716EF0BBD976ED2F84FF2087AFED6
-:102A70000F5D5FDE3706F74F145D3C363B184F1491
-:102A8000540FB9252F183F0C13375C0A74A8C50DD5
-:102A9000353DA6D1B185F6B5E23D73F878625BD6D7
-:102AA000C1BECC2F7C2911F8B35C6171236D7FD43A
-:102AB0002FBC2D59878F223FD3DB96FF53DFB9926E
-:102AC000C297241017F30FEA9D565AAF5048E23AC6
-:102AD000E4331BE669152509C877922F0AEB15A781
-:102AE0005CDE285AB7EC7B45149360BD39244A0854
-:102AF000D28F96D7D1E8FF703DE0EFEC29C9753E43
-:102B0000BFBB028268063F293A884F946F0986FA54
-:102B10004392FBA164B4177B05C789900F966DC8DB
-:102B20003F7B46527F0A709D6A551FC6FE3F3CBCE4
-:102B30006F4FC678F1C17F0AEFC175983E009B8D3B
-:102B4000A4E9D6B3D1C661B08E93DD176A71E9E509
-:102B500004EF63B601CE20CEF239F1429CE505F3D5
-:102B6000CB22E8A3263ECF70D2EC94FBB2FD42BF4D
-:102B700027B73A36015DFC2E390BD77FC1E6DE3030
-:102B800098B61FDA220D86B84D83F3192BE4CFEEE9
-:102B9000DBDA94DEA9E3BF434FBAFB84F30FB592AF
-:102BA000FEC5990AF15CB1AC54459303DB45A8F727
-:102BB000B0CFB6B42AB0CE935BADD3C2C535C41482
-:102BC000C6EFC3B730BB76748EC905E2AD8878A472
-:102BD00004B88F7111978F36C40CDCD9813670968A
-:102BE00088F71AB4BE3F96D66386AAE81F0C18B8B9
-:102BF00013C70FF8BCC4C5F2283DB63C5A5F9F53BB
-:102C000032741DADA747BB3F06FAA27AA659427D92
-:102C1000DA1203790031032725AFA3B51881548553
-:102C2000B373FF9ACCECEF27CD1A5C25CC83DCB7CD
-:102C30005546FE3A9426E2FD1385DB12A8FF252DAA
-:102C400086504A2465AAA70CE0584E5A1AC09F2AFB
-:102C5000735EFD522CF927E097BF5301FE5F1FC141
-:102C60000EFF1DDF1F0A114A3F07B7345E47C2E45B
-:102C7000516B74F85C8C2AA5D0FE6BF9BD2E714C9B
-:102C800042FA898CEFBB98BFD9E26B88A6701CBE54
-:102C9000BDB9977EFE2310744DEE896FC87F2697CD
-:102CA00043FEAD1BF3691B4E9A107EAFE60A5E81B0
-:102CB000C2E7608E486D36BAAB7E566F7F5ADFC072
-:102CC000E9B872FBE1C65EC0C22949B8EEAB398FE4
-:102CD00059597EEBC5C7AF87503E5804F953141FAE
-:102CE000A39468AF93E26B314C41EB2315ABD7470C
-:102CF000D76BB77794C6D1255E48165C9B815E7210
-:102D00008802F2035D1013439442EB2032909E92AE
-:102D100008E673AD2FC8DD0C71B175E9CE16C83762
-:102D2000DC33D08AF966A1F9C47B84FA97E2212EBC
-:102D3000152FA0BC3E98F33BBCA73B986E2140AF3B
-:102D400098F04B9F3726303E8DC937DA9FE52959D9
-:102D5000DCCF261E4B41705F31FDAC6A1425A49771
-:102D6000E3D9F843FD042FD0DB2127970FF4BC5B98
-:102D7000C120929AA5A90323E3F595FEA39C9A5D31
-:102D80002C68E734F53CC70B82774D369C63003DD9
-:102D900007ADDB73045CDFAEACBB916059B800EEED
-:102DA0003143F7BF2285F9473225BB1C906F2D6B4D
-:102DB000C6E8F363E4C21B27D862318F09EDCAD499
-:102DC0001C01CF33E624BBCFED919FAD10B76CC093
-:102DD0000FB53A5282F3C57CF9EC4F20FF775CA126
-:102DE000E08B82FDF0FC66FA7FEDA05FE47EB359D4
-:102DF000FE75CE263CCFD842B30BEE72C6DABCCD00
-:102E000025B4FECA2712C6B3C7F51B85F9D5A1EBB9
-:102E1000AF53886F3485EF2BB912C23BEA92C7706B
-:102E20009E37734D286FC6413E36E42FEBF3AA510F
-:102E30001F1AF3B9C7891FA8C5D0EC62FC4A244FFA
-:102E40002F90EF131C46F8D94F1AEF8B2BF32D86DA
-:102E5000FAB85C39440F7B10DE2F6730BA7879807E
-:102E6000E0DD9C15A4B3B12713BC4067F02716180A
-:102E7000E06838678C5F56017E87063CF15F704FD3
-:102E800012E35C7D23DE8373F86B7412C3F16E4F23
-:102E90007FEE27A0A734F887D2C1C5E3FFEAAA6274
-:102EA000C07FBE767F1F82FF107C630C523B47DFE2
-:102EB0009E78C7F5B37AE25BA3831EE7BEBB754D70
-:102EC00036C5EBAB76FA00F0BC49F6DE2504F174AA
-:102ED00041BCF62B46BA59A734DB40EE475D72DCA5
-:102EE00006FE814617446CCBD7DBFBFF2A7C976C30
-:102EF000109833E912BC10D77B0B1E0D0BAEF352AA
-:102F00004A77BECC4B20F74915CBE36850F3D87B0A
-:102F100057F94C9F86CA873FA4B0F73ADACD2FA75E
-:102F20009F2F4FB5D2E626703FD600F976F47CF29B
-:102F300086D9F046039127CF46794936082C0FA150
-:102F4000E8F728DFE739BCAB8430EBA12583FB74BD
-:102F500032BBBF2811FB93695A5E52D507B8FFC92F
-:102F6000AC7EB1FB7AE35FB4AFA3945688CEFF9CEE
-:102F7000C8E3F29ADD3DC1C6F20E271489888F3767
-:102F8000B7085ECC8FA4FD3C944E1671B29DC8ED7F
-:102F9000C0B385CF340D76823DA81AEC4EA1A81D92
-:102FA000EDBEB842A33F18AF461BF09F383AC15060
-:102FB0004FAEEA65E89F3A2DDB1857705F6A78DEFE
-:102FC000BB26CF50CFA81F6EE8DFE79612433DCB5C
-:102FD00033D6D0BFEF9A49867AFFE6EB0CFD7FF43B
-:102FE000F01CC3F301DE4586E7976D5B66A80F6CA6
-:102FF000B9CDD0FFF25D77199E0FF6AD333C1F724D
-:10300000E87E437D68C7CF0DFDAF7877B3E1F9B0B7
-:10301000CE5F199E8F38B9D3501FE9DF6DE87F5519
-:10302000609FA15E4C5E33F42FB5FEDE502F57DE5D
-:1030300037F41FE5386E783EC6F999E1B94607E3E3
-:1030400072BE30B48F77FD2DE43D9D2A16E780785F
-:10305000405F78D48C65346961F73AA403CB850569
-:10306000EEE254E08F473D4D9090D4E0F1FF11AE79
-:10307000A6DF2CEC1BC7EC2795E8E5A7969F4AFD39
-:10308000164F142585D800A5DB2194EE0202964A3E
-:10309000804AD64488F74461991048C4F6C4403C3D
-:1030A000964981DED89E1C48C33225D017CBD44028
-:1030B00016968EC06558A6050660D92B3004C7F554
-:1030C0000E0CC6323D3002DB3302C3B0CC0C94622E
-:1030D0007B9F403196CEC0382CB30263B0CC0E5CDF
-:1030E00083FDFA06AEC6B25FE07A6CEF1F988EE5FC
-:1030F0002581B958FE28301BCB9CC0622C070416D2
-:10310000627969E0261C7759E0462C7303B763FBAC
-:10311000C0C0AD580E0A34607979602596AEC07A89
-:10312000EC3738B016CBBCC07F61FB90C07D58E651
-:10313000077E81ED43033FC3B220F0189657043653
-:10314000615918F83596C3024F62393CF00C8E1B5A
-:1031500011D8816551E0056C1F19781ECB2B03FB3C
-:10316000B1FDAA403B966AE0356C2F0EBC826549E2
-:10317000E0F7D85E1A388C6559E07D6C2F0FBC875C
-:103180006545E03896A302C7B01C1DF80CCB318111
-:103190004FB01C1BF802C78D0B9CC1B232F0376CCC
-:1031A0001F1FF806CB6E7917315FD96D427F96FBF2
-:1031B000A991FD050FCA49337F2F0E72AB31FFBFB6
-:1031C0005EF062BC30A9F325A89B0B2D182FBC81A3
-:1031D000F8F13D81FF269D7690A7EDC34EA443BC38
-:1031E000E9CD645F863EDFC1CCE300E5E22909FC5E
-:1031F000D50949FB92419FDE409B21CF88A8E7304B
-:103200000F7202CF83BC41A20E16DDEA61986118ED
-:10321000F6F359687D462551F368FFA661168CEBDD
-:1032200037E5513F88967767B17CD91DA94C5FFE81
-:103230008A97BB52991DEB2960F7FB336EECCFF8F0
-:10324000A92CF1027E1383C3DF07F23C5B9B3F1383
-:10325000F3632F72DC67297C1CEFDF9C5AD5960A3A
-:10326000FB282139F5B6603FDAFE6284F67DE1DAAB
-:10327000F799183E3C4744EE2754C54D3A8F9FF0CE
-:10328000E68A8E4B5FEA1FACBF15C10F256425EEA1
-:103290003776DF2795D7527D38B1507451C9413EFA
-:1032A00058B16BE447FDD9BA909FE92911317E31BD
-:1032B000A3E8F081445A9FB13C1EF3EEBBF7556280
-:1032C000C6E7131C472E7D891EFD86FAE7477E64FC
-:1032D000888BBAD1EEBA89D32851CD7FEDD49E2305
-:1032E000BDB2B8EF4DB0B813E49F19E7ED50CDDE95
-:1032F000F3E5C710D5425403DD3378AD87FD83EF86
-:103300004FAC26583796F7A17045BDEF8995BD0D96
-:103310000238EFCE38A0BB985C3F395F7C19E029BA
-:1033200061A242A70DEC9848F04C7030FA8B2B52FA
-:103330001D1E8A9FC6BF8B78CFB53FBE4001FABF26
-:10334000C7D62F15F823D9C1E2278DEDEF617C2B6D
-:103350002EDF4F3C36767FEEB4401CDF8AE5AA159F
-:103360002E2C1B571462B92EFD7E2BC44BC464094E
-:1033700032814954C63C8C0769EB9BE3E7588B5D6F
-:10338000946C1D722584904488330C87F736E5CA07
-:1033900095FD08F92695E57DBFE9F8C806FCF04DD6
-:1033A000AA13EBA289DD1BC7E4FB54C84B88712923
-:1033B000259233D88E7F49D8BE19FC913749E786CC
-:1033C0006B008E2A7B1FA381BF6FDA50DC9FC35531
-:1033D0001B1782F7103C8BB20BEFADC568DA3F3795
-:1033E000325E0738E2719F405F12A52F3FDF3751F1
-:1033F000634C309F86DFB3921FF3A91A84F079974C
-:1034000043387E1A155539DF3D0A51A4BFEAE5A9B4
-:103410002D7757083DDB50BE621DF2B9B8BCDA9F6C
-:10342000AA0E73D0F9C75CC9F3EBD313500ED0F6D4
-:1034300001C3219FCE44153AC02D41467EA140884C
-:10344000833C5F6275C64D3A4F1EC4DA150E553285
-:10345000C3FD80330EE0B5969F0FDE50D6CB817F43
-:1034600057BFA0BCF022DD86F66FD1E4408215E59F
-:1034700093C8E1A18D5BE860F2D8945D35D33194B7
-:103480008D033EA27537C08B58697D20D6E7E07367
-:10349000A5BB3E0FEB0ED61F13692E420ED3718BC8
-:1034A000719CD43DCF52ACDBBAD7ADC37593BAEBA8
-:1034B00037623D9DF5BFD875B4B2FBFCBF6372F2B5
-:1034C0004B498D4BA0F43CF696B955A00AC6DFB225
-:1034D000B0AA8CEAEF3FAE785705B9F40195278D75
-:1034E000B41C3B607F22F839E387EE8F71EAE8F580
-:1034F000061ED76CBBC53C1AF45DD1AD62D51684EF
-:10350000F74AC3BDCF1A8799C79BD83E664884DC6B
-:103510009100F2F7F0A58D06BF93F3A1C2DABAF7D6
-:103520007B9B80FBFDA09EC9DB0F960B286FBBF930
-:10353000349E703FDE970C709AB95C27B74918B873
-:10354000D45B88DB20D723C18790BFD2FA97B67EA1
-:103550001897A5969AB52A8C3ED3E014090F3744E4
-:1035600088FF6A70D2E0ADB5FFE98E210AB3ABBD2A
-:103570000638CEBA7328C62B6FE0F17A126FE5FCDD
-:10358000C9FACDA0EBECCC457A7202BD433D6C9EEE
-:103590000D5F7706FDD71D79178507CC97FFA0FE35
-:1035A00080DDADBBFF0C857B443A8C00EF3A0BC14C
-:1035B000F72AFC5BED2C9E94340DE7ADE1EB92A471
-:1035C00019B88F1ABECE4B7B637C26B887DA6ADFC8
-:1035D0000CFE705789276522E06BB319F3DAEEDA37
-:1035E000BBFEC82FE03E789319EF4E167EF14001E6
-:1035F000DCCB76713D4615413B7C47C14DB43F5510
-:1036000080F91710367F97760FB2350EE17AB26CDB
-:103610004BD3085A76EE595A09F197137BC71F040A
-:10362000FF79613491D2C0DEABDF21233C3CE68FD1
-:103630008C768214AC8B3DEB0BA0AE8B232DF49AD1
-:103640008375FABFC5DB8C753DBC4C7A7839CB8C61
-:10365000F072961BE025BC68F7893A78959D792928
-:1036600011F4FB518713E7AB39D39802F0A9D9B312
-:1036700016CBC5DBA23C1FE9D65DDA126FA8D7EDE9
-:103680004AF3E8F5CBD9438FC5C2F9973944CF4700
-:10369000547E9C5AA136001D9F5E31BA414FCF4BDC
-:1036A0005BB23C36C33CC6FAD96601ED14D0339305
-:1036B000CF632F2E73C8B8CEA7DB98DFF9E90AAB2A
-:1036C00007D639B542F1B0751D1E664F31782DB958
-:1036D00025C6F3D190E0FE22CDFBAFDE1F21ADE485
-:1036E000B895E0BB3BE7CEA3BF23F28BF4A58CF2E9
-:1036F000BDCDFC17A01B2BFDDF398CA74A58D7E6A0
-:10370000AD6B113D90574CC876C37A749CF3639DA2
-:103710005D10593F18BF373102626228A7D97D88F2
-:103720001BEE43E87C5D926D0DC413B4FB903A58D8
-:1037300088F65D6AED94DDB4E9F3D6BEE77DDF9CE3
-:10374000E2290BF4738DB55906A55BD332A00CF8B2
-:10375000E9F3D68614B067178B677F1CEEBDAF29DF
-:10376000699C6FBD66BFD16FF46AFBCC920C7C463E
-:103770006CDDE7A6F55311DEF399C5E7ADDD7EB844
-:103780006204DD7FEDAE3332EC2339CD3D2B2D3994
-:10379000787E81DF072DDA760CF9FCA4D973C9EDA8
-:1037A000E7B3F37BECD3E630E41F7A4807F0E79CFD
-:1037B00042A231ECB5EF5379F3C96B6602F788E4A6
-:1037C0005BDA8B3ECFE44FE791AA5880D79CD6C5F1
-:1037D000287F3E7976DC419687D45C00F4F139315C
-:1037E000E1FBEE9F93DFC50ED1C16F5D9A9647C98D
-:1037F000BE73A3E5B9D00DA6619E7A4D5307BC3FB9
-:1038000066219287CB25817DB7C62BA0FD52C3DAF6
-:103810003DC4BA12CFB186C9230FFD0FEAF39B8DC9
-:10382000F269C1C3C67A3599940279DED50F982121
-:1038300093882CD4CB3F0ABF1BD398FFB980D437D1
-:10384000815DF788CCF2BBE72844EA4DF5D1D2E799
-:103850001E29984DEBF7A5317BEC53EE6FC07B8CA6
-:1038600069F4F9A25BBCB29ADBF37CC75B874C1DA1
-:1038700041703EE63F2DD2EC57E284787E6FF857D8
-:1038800076E4F3F76E15F1FEA937B4EBE4F3DC351B
-:10389000C6F35DE8FCA1E725E47E3CC7A26D57A313
-:1038A000FFA69D47C397761EF3B6F0EFFB6E4B1352
-:1038B0000C76DC2E0E3FCDFFDE1352DF97C6EC7A7E
-:1038C000ADFE72485DA36F33E76F4AF77B80EE97DA
-:1038D0005AFD158C4E3A65FDBDA81CECB72F6D68DE
-:1038E000E47E16CE2FB4DFCBE7EB17159CEFF57017
-:1038F000EB2E7DEEA967C12F5DF49B0763E152E8D3
-:1039000013A93905DEB758B275552CC0E9A4E4896E
-:1039100005BAF9C42B8E0E072F532F0D5EAA4DA0AA
-:1039200078AFD5E8BF68E504D0EF7FD96A56C03FCD
-:10393000ACDB66F1C177986A5B17E2BD0DAD1F6322
-:10394000F5D5F87E65DD2EF3877ABC2E7AE2C114B8
-:10395000CCF3209EDEEC5EDDD71B3E2154BBE5CFD1
-:1039600015E02FD7113FD273E838583F9080F27A94
-:10397000B61CD7F3B9163FAD634DA4AE75FD1988DB
-:103980009FD6B58E39017C5F47A40FF5F4540334FC
-:103990004DFD962FD278FEDD15E40A902F1A3C8853
-:1039A0003719E573C3933F1D748CEEE7D496D76245
-:1039B00005BDDFCAEFDDCFB6CCFD53E279F4C369B4
-:1039C0004AA7FAF73234B9EBDC4537904AAB6DAC15
-:1039D0005C62F6C58EA0705DB2C98CEF892E79EA63
-:1039E000B1C77F0EF944EF59F01E64F153078E0CF6
-:1039F000A7F5C53BCC4995EC1836B817D6F0524719
-:103A0000FF07F7141A1E163D734086F768A01DFCC9
-:103A1000040D1F8B77B4CB64604FF895B6B4CB9D83
-:103A2000B6307869395681EF1B3DF9B50C78FF64E3
-:103A3000AF4052B37A8EAFD97400ED188013E29183
-:103A4000E3A91B6F3DF0E59BB03B1FFB2920B72F7F
-:103A500084AF77B85EA574FDF46EBA8F9A3F585C58
-:103A600000879AA76F8A85F39C90EA197D3FB22A56
-:103A700005F2DD6ACC9E14054BD65EF3E8CD48779F
-:103A80000B0EDF9CC2F20FD5349EE79106E79CBF78
-:103A9000710A9EB39AB891FE6A1E11AB201FE62BE5
-:103AA000898CDE11863F6EE3FC716233452E3DE763
-:103AB0000990973ABF477BBFF9E6EE7808BB8FFCC9
-:103AC0008ADF4756F53219F44B37DD6E598D72F5A2
-:103AD000D30C3515EE29291C34398AF2553C5C9EED
-:103AE000CAF0C4E4318EA3F4570AEDD0BFC38CF7FB
-:103AF000C3BA715C7EB2F597F3F5E9BEA3C11E3976
-:103B00009112FEBDA0C77B09DAFE3A888ECE747C86
-:103B1000CEF87ECB5AC6E71ADF7BAF1E0DCFBF7C37
-:103B20009BF1118C037D44F7E54BC5E7ED930594BC
-:103B30000B16E20BC7DF5BCC9CBF8DCFA9C58EF601
-:103B40009C462774FF127C972C482F749D04C40355
-:103B5000DA2BD50FD0F13A3BBB0ED6C57E72B03D05
-:103B60002BC8C70BB83CB8B91795079705E501D91D
-:103B7000987C51F1812566EFE33F07FEA5FCEA71D1
-:103B800002FF9AF1FD9BCFB6EF3F721DA5F3CF5A0E
-:103B900034BE35CAD350BEADD97933C60943F9F620
-:103BA000B3F47A12966FD3F9FB73A17C9BDEF91FF5
-:103BB00095A71AFC1E09811F958FBFDCED8C0CC7E1
-:103BC00050F938AC9733AC7CA47F6F93829E74A875
-:103BD000D19F46778B7EBDB40FC8A16EFAD4E8AFF3
-:103BE0009B3E35FA0B3DAF117EA1CFAB21E9496772
-:103BF0003F98EF221E3BC5B77F8F88DF4DEA72FAF0
-:103C000063210EB42A8ACC023BBC4BE1F57856F70F
-:103C100027CB4D2027B4767F148BAB7555F963E322
-:103C200075F6F5B1363116E2BC9DDEF0DF79C3CC16
-:103C300044BA7E6784EFC0697189AEE8D841B85E46
-:103C400074A617F0552EDA326F81FCD16611BFE7EA
-:103C5000336FE5B5B19027D2D5D677E234DA3EFF9F
-:103C600015FE393F8F2AA55138CFE5783F493C0FE3
-:103C700015D1F3CD6D63F6F3BC0DE1E944BB3FAF65
-:103C8000B62D97411E51BBF5437DFC6811FFDE4206
-:103C9000CDC690F6B671484F8B42E8C9CDFDA3134F
-:103CA000BDB87E1E4C0673FFC4A4CF0B2917732723
-:103CB000C23B1E5D8744CCBB3EDB26922638E776AE
-:103CC000C14B80BF3DC94897B5547EE8E3C0A7808B
-:103CD000EECEF33EDDA9DFFE77C1EDB4CB9267DF18
-:103CE0001FF40B5A9E7AF6BD4B5E80FA734733DFA2
-:103CF000273DFB97EEFD6626C8FFAEBD1682719587
-:103D0000BD2F67DE0EF5DD16CC3FEABACBC2E2C1AD
-:103D10007BED984FD795C1DE8B69D8F3F520CCDFCA
-:103D2000268D88B784DECCEF38DBF6B73FE27BB672
-:103D30006DF454A06FF7C6A03D5EB73BCA0B4E6A48
-:103D4000D79EAF0BF4F718DFF73CB5328BE377D98A
-:103D5000C934887F75C5B33C9BBA17863DB692AE11
-:103D6000BFB4B55D86F7774A5FFCFB2090375D3BBB
-:103D7000991D71DADCF928711192D1FB8EBBCD143B
-:103D80005FA7C1B6A3BCF27CEF3DE3E19EA3275C35
-:103D9000181CBA281CE05C142E35202723C123BF31
-:103DA00037FB4ECF0F0F1E6766C2FA4BDAAEC07BF1
-:103DB00088205C0495B5DBBD5601CFCFDAF77E3D98
-:103DC00008E4F1672D2B51BF5FE8DCD7FC60E9E028
-:103DD0009F3DB7E0BB98732FFBC19E9BD17F00F442
-:103DE00053724F3EE849E7CFFD18EB4FDB5DB8DF7C
-:103DF0008BE4FFFBFF5FA3F79D02E6B15C08EF3B9E
-:103E0000FED7E2FD158E77BB02F9125D7BFE9E495F
-:103E100074E7BFD0B93B7EB0F83EFFB9353BA8C3CD
-:103E200054AFE4D3FDBD479AA764D1F22DF58B249E
-:103E3000705B2D91EE6BD2995F611158FE3799221C
-:103E400068F1A50E43FE537A0DDA1B13D4BBD97764
-:103E50009AA4FA0EC83FED2899EB5A873DF2F0BBC1
-:103E6000021D9347F2BAD1DF7A5320AA40EDDB0955
-:103E700025E30E81BD375115D11EA425DA81EF64EB
-:103E800056B0F642A39F313DC43FB8769AF1F9147B
-:103E90003EDF54B24CC9A7F09A9A2E295E0AA2E9D5
-:103EA000C5F56638CFF41B04D2AC8B6F4E0999EF81
-:103EB0000308A0E9ECC8EF0ABFBC74E6775A846532
-:103EC000080F522CF2F78D2E003FC2E0DD31793021
-:103ED000CB33965C0C7E5397BA306ECAFD50331FBD
-:103EE0006FB6ADE900BE3513A3FFA9F99191E04C7F
-:103EF000B85F8AF36407E16E5645F44B75F3213CD5
-:103F0000347C7C573C68F8FBBEF890D289E15E5562
-:103F10002B175A672F867B082BE4BDD379276E6059
-:103F2000EF91587305846355A119DFE3FAB3A9AA89
-:103F3000000CE7CA2157D4DEC6A675017C1672387C
-:103F400056937AB43BC9B7E7CE1515E0AD1FDAAD8D
-:103F50000B5542C653BFA4BA48F045D3F32F9088FF
-:103F6000272E0FE2A002F9501F07F51AEBF0776534
-:103F70004A709E0BF58F241FFED5E59FA83CFA9052
-:103F800022FD1894983F4324BDFF38AB8DC1B16E1C
-:103F900089E0CD463AF299F5F7C04F70BAFED31DCD
-:103FA0004350CE15DF3B308EF9B5F998D753C7EDA6
-:103FB000FDB31E671CC473CEB6F58D8378CDD9438F
-:103FC000A5B1E1F2790E73BFF2F72BAC58769509E3
-:103FD000CD621CBE7F3201F570591401B9133A6EDF
-:103FE00075BA1697A997318E4F583E7E353FC70256
-:103FF0003A342E4187B70DE33F9106F5C403FC7DAB
-:10400000A8BB57F9BEF0053F16E07A38AAB322DC08
-:10401000770A7FC6E56AE5BE6F64881F4C6ACBC22B
-:10402000EF4C4E2A33BE0F785F3AF7CF879021B01E
-:10403000AFCA7D636287015E0E89AE280ADFBAB619
-:1040400033B23BCCFD5C283C617E88231F37BBAA82
-:10405000019EC7EF8EC2EF00BCC1EF8B72F9F72152
-:10406000E11342103FDB9CCEEE21BE4E6771F46B34
-:104070002A8BCDC974DDDC566530E497F5E2FDBFCF
-:104080004E77E2F3DE7C9CD6AFD712D6EF98ACD455
-:10409000863B7F4626A39F05C4F5E342E18787B7A9
-:1040A000E27BED3E783FEE6C99C0DF9F09A56B8205
-:1040B000FC7176B4E005FD0B7E2CD62B05D4FF6F8A
-:1040C0006879159398BED4E83E14CE6F71FAD5D6B0
-:1040D000EFE2707F9BD38706670DBEA1FBD5FA5335
-:1040E0007975953EDE3271D7E0A7C13EA96D1314F4
-:1040F000139DAA56EA94810FEB76DD6786FB85E96E
-:10410000FC775A885435487FBFFB75BA84F3EDCFEE
-:104110001B81F6E3171B987DACCE3B130B76D01BAF
-:1041200026D75B23801FDF140DDF370F2DDF5FA144
-:104130002C2A33EBE7CD627ED29262338487AE5F66
-:10414000D26E4ED5D1D3D7908F3534D8DE6B89134C
-:10415000F318E97AB80FCF3D1602F94BB92D1D259A
-:1041600031F4F9F5F5F18C0E6B5ADA65ACB3EF0D5D
-:104170006BEB69EB84F2D3E4CA18437D6E69673A4E
-:10418000C0A5D2E25BEE0A43A7F76774C755BF9B91
-:104190009E5029DD0EFAFF414F9CA908F73DD4D966
-:1041A0001C6E3AFD901A4E3F2C5BE94C05F82FDB54
-:1041B000D337159863D92BE529E1F4C33B2BD8FD00
-:1041C000E1519E7FD93599EA87CB75FA617214D295
-:1041D00047E8B87119DA77552EA01F347CFD87E5C2
-:1041E000CC3BA01FC2F0F5CC0CA37E98DA361BF5B1
-:1041F000C3D4C92271EAE27153322EA41F8A53A696
-:1042000063DDEC8A094337EF70BF04E00A25AC0395
-:104210007AE2EE0C26F743F54524799E7DB1F2FC57
-:104220007F08CE9A3C5F3685BDCFDF930E09CAEB7F
-:1042300065D305FC1D93657B983C5F76038F4B86A9
-:10424000C8D72A90AFF97AF9CAC6D7BA993EA8DB7F
-:1042500095F5D319F4F975CD669795F6BF2E286FAD
-:104260000BF4F2F6EE0C498373A61206BFD366C4B4
-:1042700010A7515EF50339757CF0CBB9CF00DDBFD7
-:10428000C1DE37FB33D7E3AF0F7E391FE2E91FF101
-:10429000795B33185E4EAF208BCA281C4AE7317B0E
-:1042A00078E97611E150DBCAECBCDA6D02BED75B6F
-:1042B00091F70DDE1B2EDEC3EE0DE1BBBEC53A3C11
-:1042C0002E7EA3B3A9373CDF24E0BD67B56B317BFD
-:1042D000FFEF611627B6D2FF205F626D74EC668235
-:1042E000793A2AC69B9772B8555AFC07617CE51348
-:1042F000826B13CA35637C7A69BFB19F807FB078C7
-:104300005B48BB6B2DDE672C85B8B3CE1FF93DE74C
-:1043100093F9A22FF719C80F7C4B0CFBBB675ABF50
-:104320006E38D47C4F381CA670C8FFE7E150D776B2
-:104330001FE6DF7CDFF3BF93C1E3ED79241FF8E5CF
-:10434000CF2615F9DFF3AA88EF17CFBBAF7FAA3EC0
-:104350004FE93887C31B2677531AF4AB65EF212F3B
-:10436000D8B8E300BC223EA3850C86B0FD82878DC1
-:104370007AB25B2FB73A51EFCEA8DF21C077FDE7C5
-:104380008B047F0F6C6E9EC50DF7AF87A3FC28CF03
-:10439000343AB467B2DF8F8BC964EB1EEFE52F436D
-:1043A000BF6297A0209FC07735A04EF100DFD5D81F
-:1043B0003FECEB0A0E778CCFD4ED6278AAA378019C
-:1043C0003EABA0F62EE891EBA9DEC1FBB2B6763388
-:1043D000F4AFA1FD1251EEB8D0DFD5F413DCDF1538
-:1043E000A7E8F0B6E718A3DFAD828B84C15B0EFDB2
-:1043F000EF7C788B842FCD7EB858BC69F0B0671AFB
-:10440000F17738AAA37208DE53B1DF03226DF17889
-:10441000AFF251735FC4636F2E6743E91BEC7DA756
-:104420002EBE74356C1C3F601F857972B86E36B332
-:1044300087F4F225D48FAE231D68D724A7B97F9DBA
-:10444000AECB8B9BCAF357BAEF7583FDE6679CA78B
-:104450001F7194E0FD8F96570BBF2085F960BCBE9D
-:104460003FA3E0E80C7ADE2FD688F89EF2B526E767
-:104470009122E0E375660274F9C5EB6695D9A13126
-:10448000288767BF71DC0CA191D9905F40FBCDBE3E
-:1044900093C9DBE330196DFB03D5632A7CBF84B479
-:1044A0000C85FCFDC9AEF672C8DF9E927F7815DCE4
-:1044B000D35D53AA1C3902F05D2B1280EF876B4A43
-:1044C000D15FB9E94601E9FADD15F89B5864CAE401
-:1044D000AC2347E8BA37AC49C67BB619EA8172A06B
-:1044E000B7B913ED36B8A71B972306F37B09BC0FAA
-:1044F000D5B10AE4F78CFA1BA7C07E6BA85E80B822
-:104500006B4DDBE1F254A86F14F0F7D4EA3C6E195E
-:104510005E85EA78F88C0CF18F6ADA0FD053B79188
-:10452000F5ABDB22E07B3ED5543EC0F9AAB70804C8
-:104530005E28E9A0F69F95CDEB850F34756CA4E35A
-:10454000697D018C8779B7C4E3EFDED5BDCEDE137C
-:10455000AA2E5C7910E453351D471F938E2D37E248
-:104560007C0B370A0452836B0AB3EE2984F95E3759
-:10457000E3F7418EB6FF4C867DCFA4EBA5D1F9E7DA
-:104580008A9DE5986F7DBBA0E07B4D65B7211F74C8
-:10459000713E2049B7B2FB6681D7B95DA8E9C7C7AC
-:1045A00032B391BEAB6F59D904E7EAF42467814B6B
-:1045B00054B7EB8C0C76DE472BE00334146F3C0FC2
-:1045C0006EBFE7B8DCA99353BECCBE488FF3761517
-:1045D000239FCF2755782FEE5EC9F4F2B155515E77
-:1045E00001EC11B3827A73FFAA1F3D04E73FFD94EB
-:1045F00019EF4B4F6774627CF6C446337E3FA4616B
-:10460000A38872E4C4761617121F99529106F0A37C
-:104610007200E86EFFC65219E4E109AF80E34B1F58
-:10462000B93985C57D8DF2A3DAB908E5C523514CAA
-:104630003E2C7838FCFD6A4479B1BC82C9F7107908
-:10464000B034BD09E37EA172A28ED834F99007F58B
-:104650000E5F1AD26FEDEB6602F65DADA4CC7C184E
-:10466000E8664614DC2453BEF01D00F9F685577049
-:104670007AE8F3EB673D3F14E0F731C01BF8624383
-:1046800022DEAF567B67235CB57CC4050F1BE9595E
-:10469000CB7B9AEE1683EFFBD0FF5D5F1343545D37
-:1046A000BFA37752BAA4EBCDDA2578E13B4847EFB8
-:1046B0003C76F0E67CAC2B4087B5B770BDBAC18EB6
-:1046C000747BF4D633AB802E67DE21E0FE89C7DD34
-:1046D000047AA5F661C10971CD0577B0F10BE878D0
-:1046E000A097A33F63F443E9D809745EBBF1BE838E
-:1046F000D87F8BE084F98F6E9A8D7AB8C623127CAE
-:10470000BEE518DACB541F60DED07E8F9802745E4F
-:10471000DB685100AF1ABD68F4778C7F879A585DCB
-:1047200083AEA1E36ECC7486A53B715A16D257DDD9
-:104730007633D24B9D87D1D3B1A744A4C3FDABAE92
-:10474000AD00FA39BD5588407F94BEF283F4253E12
-:1047500062C6F10B9E64F185FD1B195D9F6865F6CD
-:1047600069E923FDD1AF59F08699B0F803B1E9EDBD
-:104770008F0BD16128DDF5D04B9C0E23D19DDBDC66
-:104780003215F20F663F4DF7EF0CC2ABB4E9568C11
-:104790000394364DC7F36AFC532DB1BC8D79CD2BF4
-:1047A000593EA3C4F27BBEF3BE42F6715F503FE6B2
-:1047B000817E84FC131FDDC7CBDB1F433BE0F35F2F
-:1047C0001DC3FCC6C52F50FCD3FEA7B7DB890FED78
-:1047D0006C2FCA9945AD22E69712C957708DEE7DB0
-:1047E0000D2D2F63F16FEC08F7453B2DDE4A3A7E25
-:1047F000D1B3C707E13DF95DCC4EF5FC8A7D6F86EC
-:10480000783A075D03F99912CB0F09D5BFD17D58CE
-:104810001CE7D4F331F85D26615B3BDE332D6AB9CA
-:10482000D66CD1C52D853E66AD1FDEDF7828FEE152
-:104830007E11F6A7FF5D092D2FE4D4938C7F16ED32
-:1048400032A37DB468DB268CF7D56D3B83F9B3A525
-:10485000BF792A16E050B74B34E64F6D137D16CC66
-:10486000F3128F59D8F7390C794CB5ADECFD8EDACF
-:10487000169E2714923FB3F8377B9EF550D02C7EBE
-:10488000E68958E0A74F3BB6C6023CE97C987F34E6
-:10489000B130427ED285F2925AD6F2BCA4F1F87BB6
-:1048A0001DA179499FC23FA81E77F531E679926D27
-:1048B0004C6E51EC17847B1F49B35F163FF5D5A3AF
-:1048C00090477B6AE7678FC2FE97FCE38B4721AF77
-:1048D00083EC8D52C09EA8FBD53B987FA88D1BDB37
-:1048E00087FB474F3E81F99BA7DFB3A05D787ACF66
-:1048F000894CB0174EEFF82605F23297EF29C7F82A
-:10490000C4F2DF96E27BA291FC4DA04FEF45E48F0D
-:1049100086E2637FABE8B3D17D7EFEAE05F9BF3B97
-:10492000CFAC6529CBDF73F2FCB2EDE1F374B57C5B
-:10493000A8DAD66B268E0479D7CAF47A777ED48526
-:10494000F2CADEA678BDFC22F0B79DE70FB68C0F49
-:104950009B57F639FC83E2A9A68F31AFECABD6F9B1
-:10496000BFFC393C6B0DFFBEB6C6D717829B9607BE
-:104970003CB48F7A531FE08F9DBFC63C3EC05BA501
-:1049800013F4FF579910DF3C69F663DCD0BFC7A270
-:1049900040BED7A23D47915F4EFFF630E6D9129E4A
-:1049A0008F7B9A74FFB1BC491EBBA8DB6267F968B4
-:1049B0001CFE90AFE68CC5769E97C6E858CB578B09
-:1049C00094A7F6649F6C665FF3FCE4A5CE0E59B124
-:1049D00005F105F8110A015FC70CF97FDAB943E761
-:1049E00053000E57E8F32F23E503723BBD07BE9833
-:1049F0005C3EBD89E76376E75912929E07F9414C08
-:104A00001FD67985A3E1F0ABE55F6E09C1AF76BE35
-:104A1000487CA1F1E785F7FDCFC1E5A13EEC7D0023
-:104A20000D3EA7BE0D2FA75FE4FC4EFD96BD7D7425
-:104A3000EFBDCCE27E8B9677A6EDB7A985E9E5536D
-:104A4000DB98DD18CADFB5117E57EB0DBE4EEDAE1B
-:104A5000F64120874EED7B9ED39D97BF87734CF622
-:104A600070B9EDD5CBED08BF6376B40FF317A9BFCE
-:104A70001B76BEBAED67C2CEF7A9A45E0BFBFFB4EE
-:104A800083D9219FB688617F0FA1BD8FF17DD52687
-:104A9000BB8C7E97181B8DF268B9BDF05DF8BEDB4C
-:104AA00072BB8CF90E0D2B797EC49D2EFC3D8F06BA
-:104AB000FB58FC1D8855001F9D1F6A56DCF8FB1330
-:104AC0006647553EF857A1EF77CA4926E2D5E35F1E
-:104AD000F2A4E3F7BBB2BF9640EF74AC30BE37D25E
-:104AE00021290712E97C1D65820BECDD9E74669C12
-:104AF000FF6A5534C4CF20560DE73AEB62DF45B369
-:104B00009B7C0AED42EC511D0E74F49CEC77ABE1FA
-:104B1000E7BAE03E7CDD0A6B3F788FEBFF022FB6F1
-:104B2000D5840080000000001F8B080000000000FA
-:104B3000000BB57D097C54D5B9F8B973EF4C26CB81
-:104B400024936560202C37FB1E261012D058261B9C
-:104B50000609382255D480376C610B89686D6CFD6D
-:104B600097613145E5B5A12E50A5CF01C1C7A3F886
-:104B70001A166BAC510708142DDAD0E293FA571BC2
-:104B8000942A28981194F25A2CFFF37DE79CCCDCF0
-:104B90009B0984BEFEA3FEAEE7DEB37EFBF79DEF6E
-:104BA0009C89252E89C884D85C8AB7279BE0DF15AD
-:104BB000FA5F1CA1652B2FA7E0E3787A092131EC7D
-:104BC00015FD6EDF6F920889CA26D94A3121761207
-:104BD000E59269F98958F761299690F536AD96D036
-:104BE000E715F89BD4FF495CCA2918CF4AFFB99250
-:104BF0004AFB9B40CBD6E0F8F16E7D3991849471ED
-:104C00003E6E4286C07BFAA7123259A633A3F388C0
-:104C1000AF36F92224FC5E9B312438DF780771F926
-:104C2000E1FBB4189797D68F8961F313F3A5F3F9D5
-:104C300018E6A3D27F703EF93D5E13C1797D1C3A20
-:104C40000FFA27796C38BF8F0DF3FB38747E05AAF5
-:104C50002DE9D3685A50887285C237C6DA4D389C20
-:104C6000CF87C299102F514A009E02AEF43BED2728
-:104C7000457A52B922015CED1249C3F10CED46D8D8
-:104C8000B17F28D37EC7C09A271252E694DCA7C60C
-:104C9000D1FFEF4C22641821A92D95E4135A96DA1E
-:104CA00008C2277D3DF145D0F9A5074C58266BA3D6
-:104CB0007C19B46D84957823C7D27A0AF19AC742D9
-:104CC000AF3E42C62370579B6857CA3A421EA3EDB7
-:104CD0003A0315A60514A8EDF089F63F51754F511A
-:104CE00069BDD6DB34A7A9089693D7D65546081DCB
-:104CF0002E477211625A95DB7D6424214950FF06CC
-:104D0000F89EDBED8EC1EFAC4C889FD075B545F5B4
-:104D100095DD56272DA7B2F29DBEDCB675B4BF0F48
-:104D2000D23D77AA0EFACE6ACF05F8137F02AE778E
-:104D300040FAA270258EE03CB3B7F92BA3E8246EAD
-:104D400009508052FC67D03EBAF3013FDD16209235
-:104D5000ED31A2ECB710FAF4EC3B66E9A1CFC6F650
-:104D600063F8DD0465FA1C9DE8AF4CA6EB7C50BDF2
-:104D7000D1E3CCA1FDEDAB779AEC84AC546FEC564B
-:104D80001CA17098A48383B2FA26031C6EBA2E3835
-:104D9000ACF4DD847018ECBACFA99E1F015EA69614
-:104DA0009B8844072D3D11E393181F477A0A82FD23
-:104DB0006C319145ED31E1FA59C5F0CFEB093A1A62
-:104DC000884ED2883D17E8D4482F747D35ED148E77
-:104DD00053B57A4F5562904E895D1B37A300E63973
-:104DE000F74998A718776AF90A3995CEE7498A23CF
-:104DF000E8D7D1E28DCCA474EA709B5CC0E7E7549D
-:104E0000EDE7503F7656C06FA6554A8976BF941697
-:104E1000EC5FD07DEB6B32D2776BBDC9B71AE54141
-:104E20008F04EB0EE2BDC780F700C37BC749C4FB0C
-:104E3000F2CE930CEF1DAB2AA28AA12CD923545891
-:104E40004FA008F0F92BDF9D1E85E2737474A01546
-:104E5000E8C14CBEEBA9CD41B8BF0874DA0FEE7CB7
-:104E60005E02FE03E1ADED48EAE3F9B4AAF7A8C992
-:104E700095A106E125EA1D572D586F63AAF61B1868
-:104E8000A76942CF61BA52B2E7C81F62353ADFD88C
-:104E9000A333F643FBD89914136A70DCB6A3AB2B8B
-:104EA00080FEDB80FE51CE04BCF698ABC183F14599
-:104EB0001F3CF69D44F898A04CDFEFB430BA29EBC4
-:104EC00090DC3EE08B6872AF873EDF564D38BF9373
-:104ED000AACC9F12C3E3D103B24ADB97AD35617D03
-:104EE000073CF343D7BF16EB9D54152E77183C04AF
-:104EF0005E051D51C289BE8DCE797896F63EAC3FD7
-:104F0000483709D1A9F47B69D7DCFB496AB0DD4F8A
-:104F10005612CF7C73B01EA59F9775F456608E0411
-:104F2000B8F5D10FA54B902F46FCD076A7193F2599
-:104F300044ABB4FEEEAE15B2963F78BC9644906694
-:104F4000987F493469DE43DB97C4D127941379797C
-:104F5000282F27F3E768FE3E8F95D33E7099245A99
-:104F6000DE0270073CA498189C147B2EF0912985D2
-:104F7000C1B9CC198DF25FF0AB42C11997006A88B4
-:104F800078E1991A4835011E05FF2A0193DF46F59D
-:104F90005FAAA29A5CF4FD5B2B354F55C6C0F2E5C3
-:104FA000961CD9E30B232FE25218DEA980F69ECA85
-:104FB00006ED2C91382081615A5C0A9D57A3B5E714
-:104FC0002733E8D7E539172C809FD5D1CB6FD4F2A2
-:104FD000071EC7388FB72EFF361AE8ABF352444D81
-:104FE00038795503EBA7E31F59390BDB3D1A155BE5
-:104FF000C8952ADA2DDF41D1449FE94B6A4921E067
-:10500000C3AB2480FE8B965CDB09E285E9C3A12952
-:10501000BEED29801F5F2D96F3D2C87609F0A4ADAE
-:10502000B141594EC1FA1472C23E92AE4460DFAA39
-:1050300042ED0D44792AE0B3F9A00D847D04ADAFB3
-:10504000C27BBD3D45E7B7958C017CB7552540BD7A
-:1050500038DEEF2566E708BBA83AFD963312CC7719
-:10506000B45701B94AD252703EE5C4ACB38F4AB2CC
-:1050700028C8617E59B93EF85E69357CE77454DD15
-:10508000CF8E6A73CDA0F43E359BD23F7F7F81FEE9
-:10509000373A82DC7B5B7E50BE4F51EFF254E9EC35
-:1050A0008F3617F0E1EFBE9591EF8DF8D8CAE9F190
-:1050B000C84A8FA78AF2DFAF22293EE87A2B5469CB
-:1050C000AD4DBD36FC8C7833C2EF3B9D0BD17E33AA
-:1050D000C2ABFC03575582DA1F3E467808F8D3F579
-:1050E000AD07B85567CBA8AF04BCFBC389D1C3EFEC
-:1050F00072683D89D10FC38744905E04FDC4A52129
-:10510000FC4B80F6E07B740A968DF035C293CA01A1
-:1051100037D6E7F83B0C70CB80AFEEDAEA214138A6
-:1051200050BAEA8A0FA12B01877E72238B9739DE52
-:1051300085BD5CCDFBA1F632DAC3950E9B0BC05F3B
-:10514000D9C8E65B9911B3D59B82F8DA8AFCE3A74C
-:105150001829C17FD9DF2566E752BB94D167E7E400
-:1051600033603F8F8ED0D6027F04A478B29520FCA6
-:105170003F36C05F57AE36D8CB4678FC0AFE676232
-:105180007FB809BAFB790AB5AFF36871381901F62F
-:105190006FE12BC57120C7496702CA63233D969E04
-:1051A000F0F4F5C3E917E953225ADF7B3BB5233A04
-:1051B000B21F7902CC9A1BAD6D32D0E18DC4BDE631
-:1051C0009415D62FE33CC5BCFEEEF4EC4CA1F26680
-:1051D000624FCD9A53A17CC1C717F0BE89C3FB268D
-:1051E000E2DD2FC7C253F9BACF8E0FE96F6F0AF70E
-:1051F00017924932ACC79EA232F9CEFB13EB1B9D2E
-:1052000046FC12C2D9EADB2AC1FC89D792101CCF16
-:10521000CCD1949131E3B51494C7CD04ED656A5EA9
-:105220000212CBF8F7326B8C1FE64302CAD93E3C20
-:1052300020DFD5D901AE142EE44A74707EBF4B91A5
-:10524000944FB383F33BB7C3EA95819F8769BF87C8
-:1052500071CE4A470B916F157F26E841E3F70B1D8E
-:105260005DCBE13BADB710EBF1752D05A791D25D9C
-:10527000E0B508DFD694ABD8A156AAC242E44159A2
-:10528000149327D5242083DDD919C9F8F9F5AF1671
-:10529000213FB8897D6D1EEDEFD0F9C947809F2B66
-:1052A000A978817A932EE9FDB66BD1691509CC8175
-:1052B00076D576B3C10FF4A2BE59CBE59AB0D34CE4
-:1052C000A9DAB9147C3FCA077AA6F3ABC92AE06D04
-:1052D0006BF6F85B6EA7555273C6CD00F7CC64ED44
-:1052E0003683FE9BCDE96B02D097845690A0AF8B9E
-:1052F000D04FDA3A037DD913747EDD2DC48FEB2FA6
-:10530000CB36FF4D373F6E9718EDF5A09DDE16D6D4
-:10531000BF235D0AC9A6709EC3E1BC36DEE205B9B3
-:10532000A6DC27F9480ACC978C5A45E739BBD9AC9B
-:10533000F347E7C42B88C739AB227D84F9DFCE7AE7
-:105340005AD6E8FBC7A098ED7686DA55A425A43D89
-:10535000D0438C8AF43BC7CEDE7D44FB189600FD1B
-:105360009E72A013EF359F0FA553E3F803F66B6809
-:10537000B75622B3C07E5A6B763B5D21F6C7A85460
-:1053800066BF9CB7576D32A50E6C9768D664B7920E
-:10539000182CF7C45B67F9C2D831A23F4127651AC0
-:1053A000F3CB07EA373D50857699E949BF0CF6768D
-:1053B0007A80A07D5C16709BE6E9EC74E69FF6B3FC
-:1053C000D3DBF7A39DBE6CDF7E66A7B7AF427B7FC2
-:1053D00019B5F741BE53BB1164259B503EDAEF7DF2
-:1053E0007E26E52D52D62EF5F9A10A45455A1BAB6E
-:1053F0007FF7D6ECF847D3C14FD49C66EAF7DC9D23
-:105400005AB0C14AFD9ED6141249A8DF332BB5E02D
-:10541000B6F513283525B825128FE50D311307EFA2
-:10542000D7DE9D9ABF01FCDA81FCCBEA54F5AAFED7
-:10543000E507E99EBB5343E202543E86B54732324C
-:105440002AE6403D2137CAA2187F3E6AF2A7FD1422
-:10545000FCADB76402FAF4969679E8074C6B59EC08
-:10546000A9A2F3E93D70399398405E32BC37A63269
-:10547000BBA6299AD9974DD1B41F2A6FDE746A8DC5
-:10548000D07F77F6F3EBC7527EA9EB905DE02F4615
-:10549000665D1E05FC3F6DFCF34F8EA5E37C185046
-:1054A00030FED069A37448DF7F4824B467CB8E45B3
-:1054B00078F651BC7CDF59DE961AE29F7CDF598575
-:1054C00065524B1D2BCA1F2BAC8C2F3F24FBD37E68
-:1054D0004AC7F1364B68079C6F4E89033AE834D3CC
-:1054E000F587D0E3EA5405E96F35A7C7BA4B320612
-:1054F000CD3ACDFEE4665ABF4EF19BC10FACBB6402
-:10550000C1F7300F984F67A4BE9FC7793F8FF7F55B
-:1055100043E1300EEA19FB51D87B89ADCF8887D3A0
-:1055200029953F85F57CDFE96E43BC51F905FAA268
-:10553000ACB8EB04D811D7D64B6E09F452D365C979
-:105540003F9AC2F3EC3E33FAF767C13FA4E39DDB19
-:105550007770C85CFA6CDCFDC758F007B7707C9DAB
-:1055600053BA63617ECB5EA2FE0BDA43FE21F76085
-:10557000FB79258FB161ACA1FA7AECB707933D2C8A
-:1055800078A8427C4ED8A53759BD3E985FE72A19C6
-:10559000E508D5E7226E2A81FC9EB44F7647C6F611
-:1055A000B7575F4E350B796B023DF6809D8D33907A
-:1055B0003C28BB94487C21F2A24CF1CB30FFB24B8B
-:1055C00043F0FDB923A94FD402DD12B30BCD4485BE
-:1055D00074A1BD2C11F1D7954ED7F33A2FBCB1EF82
-:1055E000C2ED37223352BD48EB7CC7AF25A1FD0C7D
-:1055F00021D292A05D38E9923EEE6AB4A3859EADB9
-:10560000E82C5A9B4C00EEEAED37021D1E51907FAC
-:105610008C76767560F200F6F406A4A33DFBD2A268
-:10562000212EB091F379D3BE0B93413E2D27FE3B43
-:105630006E4C82B8836CF793ABC5BBD6FE6E121D61
-:10564000FF8D80A2823C7823D0652DC4B209E31C73
-:10565000656F97E501FF7606941AF05BCBBEEA8A88
-:105660009E971FB46B3A2F9BF0FD1B970FE07BD1E9
-:105670006F6720210FF4F36E13F3B7BB0EFF2D1AE3
-:10568000E4EB1B97CF27A2DF2FEC92FE7635FA01D1
-:105690009536B92F0E1D6ABF13B9ECB815FC8D38BD
-:1056A0003391110FCC1FED67977C40D6DA487FFB12
-:1056B00044C01FC812F8A69F5D1D84B7CEBEBE921F
-:1056C000CAEDE59164EC15B0732F272E057DDDDB67
-:1056D000196D5F8DF1296657F4767DFEB3A9F0FE52
-:1056E000A88CF1B6DECB32F2D581D7978EEE890940
-:1056F000857B2BE2EFE2B0AFBE7C95D6BF78280A5F
-:10570000E3EA4471E5858B9F04E3C9FEE126273C6B
-:10571000BDC34D1390ED305EF09D60BCC09186F12D
-:1057200082C0645057999B4F5A20DEB231D5333432
-:105730000DDBB747C3BA174531F9E42515C9D4784D
-:10574000222F1D315500BD14AF5211EF3BCDD4C4F3
-:1057500002FED8CEFCFB9D54DE825FB4B8BDCD9274
-:105760001282E7C51441B0BED366EFA88490F73B20
-:10577000D2583CE1F4A125CF019CBC7F8A2019615D
-:10578000ECD387D2983CDC6BF14EDD05F53E36114B
-:1057900018AFEBF06F0E0FA7785E7C422D023D3004
-:1057A0002B4DC57A1D4777B60EA7F53A3E00ED4959
-:1057B0004DF26DF5B2898EFB2A5159DCEFB809E73D
-:1057C000DB172725EE4458EF1D694C8EBD7A84D136
-:1057D000AB18FFD528A6EF26A731F95296C6E26E80
-:1057E0007B8E5424CE45BED22601DC9A4EF5B4C63B
-:1057F000AAC138A1B00F271EDF33B580FEEFC4B3B6
-:10580000263BA04F3DBE5586F5AAA7098997FAC742
-:10581000B1687F53D21CC1FE5E3DCBFAA3F33800C2
-:105820007C175845EC5B91EA3C8FE7D3F2ABDD4A3D
-:10583000C2632AE203F581C083588F9887DA4EDC71
-:105840005B629045DC7BAE168FA67E27F0DB382EA0
-:105850003FDF4D75DF95C6ECAC514077A70F45A1F2
-:105860003DB697C7B589B37E34C04FE0E97BFC698C
-:105870009CCF40E337733A10CF9D66D58BF4F0127E
-:10588000D3BB3B6D7E6B1AC8BF57D2B0AC7ABDD1CB
-:1058900085F47B5347864B56919E9B19DD323ABF68
-:1058A00089D3B9DA1EB0A484E06160F9C6E0DE47AE
-:1058B0003F4A3BD255C70982FCB664C77D2C0E49CE
-:1058C000FCC98C9FBCC9C05FC0178CCFFCC324F639
-:1058D0008C053E99D8B9654D326DD700749F1F84F1
-:1058E000830A7C017C26D6696376F2CF78597C6F77
-:1058F0004B6371C76A393FAEE72AF1BB37563A8925
-:105900001212BFFB199FFF62B201EDD3C597DBD026
-:105910006E559BD973F103EC99B9B9DE02FA60F1C7
-:1059200026C91DCEAEB673FC9DE37C404C51C389A5
-:1059300033F8DDC1F9E0CCBE270EC23A29BD3E07DF
-:10594000F0BFA163C3D3002641FF67B699B1BD90F4
-:1059500023A2FD36DEFF4BC719FF4CDC66AEB89BB9
-:10596000C27BA297D8219EFEEAB6ED32C8F75781D6
-:105970003F5298DC00BD7CFAD063D13F003A3869D1
-:105980002210B7DF6B218B7687E0B76BCBCB3A79F0
-:10599000B064C7AAA9D04F694F82047A40C8018178
-:1059A000EFBD16D7149427D30DF2A48AB53F06F0A5
-:1059B000A4EB7A82CB93276AA83CA1AFE2B7C54B90
-:1059C000D0CF5E1E2736C2AF8BE353D0E38D41B9F3
-:1059D000DBC5E46E4F2C74BD7CDA798CD3F68DC3B5
-:1059E000E9EE892A41772912C091DAF9A67458376D
-:1059F000850FD03FB5F3EF9D918F5C7A44C1FD21B7
-:105A0000BEDF44560BFB47C7BF42CEBD9BAA1D87D6
-:105A1000F14BAA9AD780FF9158EB45BA3E2369A370
-:105A200013A8BE3A037C1D462EBCCAE5C845B33652
-:105A3000DA1EE67B908FC870E083454433C13AC8D4
-:105A400066C90E7015DFD5CD8CDE3EE7F011EF3F55
-:105A500037C06B12C02B0DE1F539D753162B9D6F54
-:105A6000A68FE9292255203D12D32DC381DFCE9880
-:105A700009D2CF192A17016E8BA3F4FE8958D737A4
-:105A80009CAF2EC6B375ECE5E3FE097C9EF1580F82
-:105A9000ED0A6FB909F76B813E90DEA627A0DD45C0
-:105AA0001D2605F9BC6F3FC22F4B4C1EC8300F3B63
-:105AB000F8751827DA82FD2EDDB505E926BEC65E2B
-:105AC00004FB474F28AEC8F890786FD7F68DE84FA3
-:105AD000023D015F0E448F8B801E49183AF4513A03
-:105AE000A4ED126A9A118F14BFF674DA6F7C9526B2
-:105AF00003DD18F12BF619053CF61AF62567A633D7
-:105B0000F8A4A433FE54B9FC1A584FE8E52DC59704
-:105B10009AEED0D337E04DF05B4C3A934F03D1F976
-:105B200043E976ECB7F5C3794E9017623F4AEC2F04
-:105B30008BF1C7A6337A1C683FE99CAA15A51BF612
-:105B40003BD5FC209F5473FB71C5F608DCA7DF0D25
-:105B50005F00EE5D51B82FD1270715E2067C96A7AE
-:105B6000A7E07802BF6A8B85A4D3712FA6D477C52E
-:105B7000D04F37777B6B0BE83A765BBC33A7A1DD60
-:105B8000ED9A02FD4FA935D9218E1DEFB64B1007B6
-:105B9000411207BE38CAC621AA4B37EFA91CEE0234
-:105BA0004F020E03E9AB81F0F310878F837F37F24A
-:105BB0007506FF6E4E67F47F6DBEF6CA40F7B144BE
-:105BC0005B2DC3FCCB981CEAE3EB3282FB8D0BD23E
-:105BD000F57C2DCA61F87A417A285F4FE8D1F33518
-:105BE000B570B93E45FE726C33BB993FC9F8EC62A3
-:105BF000249BEF8A74A6871CA03F28FE1C5EB6EF8C
-:105C00003A95D319A5A03900EFB66D11B89F20F8C9
-:105C10003E7626A930C3FE2DE81BA835533B7113F1
-:105C2000ECDB3A2D2AEC239F3107104F67A8A3DA4B
-:105C300086F8F4603ECA994337307930AD4FFFB8EB
-:105C40004D507E7F04EE2754CB9D48D72BAA09EAFE
-:105C50008FAEEDA548078B6A5325A0B3253BE225FF
-:105C6000F89E506537C92172B1B445467AA274BB1B
-:105C70002E3D047EA5DE6619E0323A51739AE3A9FF
-:105C80009EDD367546685CE8495A5EEF0CC685684D
-:105C9000F96731C3061F17DA987ECBCFD68DA04A9D
-:105CA00024CDFD148C7B4EF56C04BC94243763BC6E
-:105CB00073B079104D3CAEF4C1236F6DAFA7EBAE5E
-:105CC0007B34F0087CBD17E2AED9903FC0E2AE4D08
-:105CD0009DC7301EDBC9F9F9EF4ECF0B30EEECE675
-:105CE00029FAF86B6070E32671BE251F10847F923D
-:105CF000A75986B884900BFBD21384FF28C1FE9B62
-:105D0000E007902B607F8A3C088887D9128272193D
-:105D1000CA71217A757D2DB583C2F0D9C1F498B0CE
-:105D2000729074FEFDD73FA0FE7E137C6272F1601C
-:105D30007A88DE7FA2F6E3211A8B7B60BCE97EEED7
-:105D4000433EB7DAF5FB2C9043EFC828FF8B222C9B
-:105D50005E09F687DC44B50FE1FD019B744A7E1BAA
-:105D6000F53F9BFE261137C4CFFE26E3F3B91F791A
-:105D70006A52C09FEF30B9A82500F91448C7AED1C8
-:105D8000C467A5F4D7CEF76BCB0FC6B8CDF47DAF03
-:105D90006445F9D7BB3FCA0B7CDD6B33615CB9EB63
-:105DA000B50884EB85F428EE5FFB747EB8D8FF88D5
-:105DB0008CE8F943196DBF3592F5BB3592C5E9B64C
-:105DC0003E9A1907F6E740FBE3652D6918E713F1E2
-:105DD000C7D4806A6249646C1C2540707D62BF7CB8
-:105DE00013E46B140F9CAFF1D7F4BE7C8D00D0533D
-:105DF000D3AC9EC33047A31F36E4E8C7FBA19F2165
-:105E00002D2C4CB0E9E80A09D6B9A92EBC1F26E80A
-:105E100068138F7B85E4457CABD32FF509D1A9218D
-:105E2000F253B47B9AE7459476CDDD0B761EE5EF11
-:105E300073A1FC3DB5E091C870FBF39E961F625CB8
-:105E40007420FAF79888162EEE373A83CB5B25300C
-:105E50001CEDC1372E46A961F2253CAF991C0017F5
-:105E6000119FE93FFE8F70FC61197DFB7FC307B373
-:105E7000FF679C77B7998C0CA757049E8DE38569C3
-:105E80003FDB15D2DE6321DAEE98FEED84DDEB9187
-:105E9000F8FEEE8704F5ABA0130AF77119F47BE165
-:105EA000DBF3C64541C2A1B559067970A1A32B19F0
-:105EB000E25603F987623EF42F235CBC858EE70926
-:105EC000878769194CBF7ACCCC0E95CA0FDD03F3D6
-:105ED000F27C65912242E86C22AF67DCC7ECFCEAF9
-:105EE000BFC7A19C34FB93C3C1CFB8BF3911829304
-:105EF0004CDFB171395C5ACB49454412C60BC856C8
-:105F000015FC40262FD516827C3E4672E3BAEB2064
-:105F1000E8E2003AEFC63CC80B4765AC57789FEA09
-:105F200003BF89EA85BB017EA544DB6B4A0BC24BEC
-:105F3000D043EB8BD44ED1C5AD18FF08FF75248F2D
-:105F4000FF5055E30EC5DFD059945443E4FE30CDE5
-:105F50004A9490385BF222BBAE3CB2D9A9ABEFF4C5
-:105F6000FA25E02B678BAA7B1F94576CBD23BD6479
-:105F70000BE8FF4DA407D7378ACF678CA4217D5C3F
-:105F800038FA4902C4257FC0F987AEB705D7DBA22E
-:105F90005D08A50FB1DE6BADEB8395743E94EF3FCA
-:105FA00002FF9C3E673F70521A8A70B7833AA07A0C
-:105FB00091B51BF9F031F423473677A31D3FA76550
-:105FC000BF04FA8BCA0D6CB769A5159FCFACB4A3FB
-:105FD0009F2FF03B82D6833C256F05C9867D81814A
-:105FE000F4D3C68C41EBA78D1961F493C91A7813C9
-:105FF000F6C11B3B6515E860CDC30998FFF25CBB99
-:1060000084FB2E073B59FEDF73AD51A847C4B85F30
-:10601000BE1487FB3F5FF27D40D2158FF4DD14CFB5
-:1060200071B2361EF7C97BF93E6447BAF61F1921D3
-:10603000F2E0B9CE6F22417FE4893C5B83DE01410F
-:106040002CD1F6E013011DB7A614AD93615D7768FE
-:10605000E32265E4F7DD8C5E997EFAE5AE0A9316DD
-:10606000829F0B1D5FCF39A0F6DF5F12FB50627F6E
-:10607000EA4DA7F66A4688BC36EE3B19F74BE45862
-:106080002BE669BBE42897ACD7B748876B32983EBC
-:106090005DB33F0AE1B8262306F77BE97C8FC03861
-:1060A0005D360B1946DF5F381183F5C4FCE97C0BC4
-:1060B0008F86996F932930E780A49BEFB1ABCF57C0
-:1060C0009FCF2CE6D7871F1E2F906D0AAEA3974453
-:1060D000B900AFED16D7090DF4EF3B512C7F8AE3E1
-:1060E0006F39E7CD5E8A2F89E2ABB7E34224D0F166
-:1060F000C174ED24CC431E198805FFE560E7851CBB
-:10610000E09781F60D958C8ABF00BE20FF0FF166E7
-:10611000D72EEC228C2FB5ABB4CBC8A8380BF5AF7B
-:10612000033EDF5C0F7C9A949875A1F697C4E5B3A3
-:10613000911EA5CEFDFF03FB01941F311FD53B8AA5
-:10614000F8D650B8B51670BA9C4954169FD1D34BA7
-:1061500047BAC79CE908F2F155E01309F57E99EEBC
-:10616000898627CC23792CCA291B94A95EDB6B492D
-:106170000DDA5BA3D398DC0BC413CC5F31EEF7666A
-:1061800064CC48CAA4704BCD564DF6FCEBE2879127
-:106190009957859F1FE9A291C3A911F619295CC8D7
-:1061A0003EF3595DBE80010E07D33D590C0E413AB6
-:1061B0005BA35E151E790C1E5A21ACC366A6F402C1
-:1061C000409950EFC4BC18D57D37EC7FEE5CC5E03C
-:1061D000D0FB2283C3EE2E13D2F516928BFC996B63
-:1061E0003A3F07FAA7F26702F453DCDD66827CC20D
-:1061F0000C9F6A82B8724E77BBC97475BA2DCB44B6
-:106200007DA14DCA64F6C5FD8087BC5D2C1E73154B
-:10621000BAADCC1C7F5D70AFCD1C3F783944E9CA64
-:10622000134A5783CD4BA2F4419213FAF747480F14
-:10623000C6FDF7BF1281F27EF91E09E5D3F2D73F02
-:106240009B03F05DFE9B0824CAAADF44E2F7F3FB40
-:10625000D8F72FCBC3EF4FDF9599807AB6B1FD3ECB
-:106260004FA87E1776C34FDDE7EDE972709F2F715F
-:106270001A3B6FB22652E49BB2FDBE584E6789238B
-:106280003D6ED05389D52C9E141BB310F7FBFA9F9B
-:106290002B617CEBE0EDEC7615ED07E33913398AE1
-:1062A000E5E539C8FAAF004E8935FAEF8E981ACC79
-:1062B000C77318F6FF04BCBD99DC6EB61027CA5927
-:1062C000C33EBF78FE2593DBEB6BE34DA1F204F4F4
-:1062D00000C07585CD8AEB5EE12089B51057B029E5
-:1062E0002E1CCBD08F78C6BB4D440D3D2F5313458C
-:1062F000D410BBC8E149D09587CE1AAEAB3F4C4B0A
-:10630000D57D4F5E94ABFB3EB279ACAE3CBAE506B0
-:106310005DFD140A80D072DABA5B74F533DA66E890
-:10632000CA599BEED6D5CFF1CDD57DCFDBB144F7A1
-:10633000BDA07D85AE3CA6E307BAFAF200F6B880B0
-:10634000B32CEC715BB1067425DBAC52A8DDF222F4
-:10635000AF571E6B45F83FC2F5F523360BEAEB4706
-:10636000B8BEEE72945C755FE69FF5DFDE16F4C092
-:10637000EDB50A1E2FFBF280C504F4B8FC20A58BF6
-:106380003168AFBD9DC9ECB5E9F5B8FA8005E45EAA
-:10639000F700F920EF65723F43A17E4C187FF09320
-:1063A0004C5517B713FE03956BEF73FDC2FC26D255
-:1063B0002C831C1072A9299AA09DD7146DC73C9FED
-:1063C000DED84B99C04F545E7D0CEDBAB39F683E4A
-:1063D0000072AA3302E5D45BD99FA03F7E4BCB422B
-:1063E0006CFF62A69DE1C5E252ED28A7F4FAF7A87A
-:1063F000B9BB16F07074BC4C56811DE42A1D4AAE20
-:1064000002F777C0DFA676F2B62C82FD5ECB5F3D49
-:10641000BA7211E64D0FD4DFD1A2488C9BD6025D33
-:10642000858C1B9DC5E099C19FD41045BFF3DCAF9F
-:106430006D3E2FF84B63DF8D2536C893F9E3382F77
-:10644000E823D27D3FECDF7BBF8EC1B84E6DD1BB60
-:10645000E35661BEA89BF97D13D89A6F7AF9ED587F
-:10646000F0D76B771F4CF286E0D1E8EF65F0F511BD
-:10647000A52713F34E5F3D3344A5CFDA570E25B160
-:10648000B8923EFFC5E8E7D7B62CD7D167E3A54859
-:106490005D1E4CA3D26D017C345E8AC1F7BD99FAB2
-:1064A00038C080F01A243C8DEF053C8F169D1905ED
-:1064B00071FA2F23C3D3F16DBC9E281BCF2F0C94F0
-:1064C000273F81B7BBE09A3814E24CB5167FFA60DB
-:1064D000E212024E6F5D6EC07311BF1EE05C44514C
-:1064E00016DB37F975F602CC6B9E686DAE04FD3D88
-:1064F00091C73FC3E4355767819D7BE25F93D73CEB
-:106500003D8BE387E70D0FCF52C3E6355FEBDCC968
-:10651000540B954B61F82BB70F7E7F9A398ED2F1D1
-:10652000FDBF30DB615E0DA0F320DEB2C58CF1D77C
-:10653000B72F471088877FB6D9FC3CE4BB2CFAC53F
-:10654000C1114F40FCBB2802F3F11AB69859BCB6F2
-:1065500028D2072187455BBE3704F22EBFA07CBB43
-:106560008CCEABE1170ECC077ABBEBB12180A73301
-:106570009C9F177DFBE33B00FEBB2DF6BC22FA5C23
-:10658000B64BD2E5992FD916A92B8B7C22813F22BD
-:1065900005F3CF552A4F5BB2F4E768C605F7255AD5
-:1065A000B2B85CBD9DCE77F9F80B16C0E3C1C351FC
-:1065B00038EF376264F473FD457FFDDD185AAEFC99
-:1065C00056C1BC7E637E12218874B290E71156BE1C
-:1065D000A2F49D0380B27F6533F2096D17531D92BB
-:1065E0006F5DF973E64F5746B23CE001F3960CF944
-:1065F0004AE29C45BF3CA5E0390B9D9D22E8E6A9F7
-:106600002C3D5F1F3CCCF292161EE576E535E4E6A4
-:106610003BB08E0CC0D75B75B06FF93687C6DB9781
-:106620003F5B3B8C963F9B2041648E7C76393CDF00
-:106630007C26F4129C0FC80EE2679A6B715F19D822
-:10664000F2D609F7E9CE2D0C5EDE5C5D9EDC956529
-:10665000C1F18DF2DD48F7FFBFE47B6DD1A1515E42
-:106660001B3E5F80E7D9DD4C3E1AF9DC28CF730D65
-:10667000723028C7659D1CCFE5722028CF2DF89D6C
-:106680009A69B81E6F89E25B23A1FFF31ED07D7E5D
-:106690008C9A584E9BACB5A7466B57F747FF2FD443
-:1066A000EF4AD13ECAA27C34FA97B955608CE7ED27
-:1066B0006A3301FFF60E608714A41AF282787C48D0
-:1066C0007C3F9B555E00F9AA7B54F614FC594C990B
-:1066D00090EF2F9FCD62FBCB3F01BB67F97F5E44FC
-:1066E000FEDC12A5391558CF708B2B74FF563C2F4A
-:1066F000727E1FF87CAD3EDFF9743A6178CFCED65A
-:10670000EDCF807F8FF90107A2106ECF3ADD9701A0
-:106710000EED4EF7B730AF32A7FB1F59217859CB9A
-:10672000D7A998F4716BF12CCD16F4EF413DBEA0C2
-:1067300022BCFC4DCD6679C1E54FDF350AECCEBFFA
-:10674000ECBF7B14C8C7AEA74AAF6A876EE0FCF9FE
-:106750006F5CEEC7F3B8E34F816F683901E296B41E
-:10676000FD028B27333EA41F73763CDBEF2EFF83A5
-:10677000278DC2E5D47A19E5F7A9181667FC2446D7
-:10678000A9D9C6DB25E9DAB179CA40F7948F951803
-:1067900045775EA21468DA31F03A4BB3991EB51012
-:1067A0009715DA5B0EDC6205FCCA92DBCEF2D219D9
-:1067B0003D4CA423003DFC98CBB1BF3BB5A26C6C13
-:1067C000C7F4ED44AE6F9518837E1D115E9E89E778
-:1067D0004B4E7709F473A7D35D9AED80B817C903C0
-:1067E000BE698F0A9FE77313C7DFDF853D4662D01E
-:1067F0006FC6F164DC577567635CCB5301FDC1BEA6
-:10680000AA59023EB0F3FA6E89C52B3C37C377E232
-:10681000744BD328BC4BFE4CF03CC7DE231512EC66
-:10682000FF2675574920C79238FE8CF3E8E170DBEC
-:10683000C3F325FAF31DF32B6670F8EF513DC85FE3
-:10684000AD299A13FC55C8CB03BC1AF32C7E99CD05
-:10685000F6D5B644F5E0FEA0F76E82F97743CBBCDF
-:1068600012E40F25D7B695538C93F9D9CC9F4FA836
-:10687000D19CE0870F775AF09E8AC1F25B7EBB1BEA
-:10688000E325C51A3BAFBCA9DB1B9949E735A45BDF
-:106890002BB7D0677ACE105CDF50D2BC8AF909AA38
-:1068A0002EBFA958ABC07D7231EF92F9CD6B2C2A67
-:1068B000E6C3ACC80EF16B929779C3E63B19F7B902
-:1068C000D708BEE4F908C53CFFA078DB53984F50C9
-:1068D000BCED66450A91339BB2CDB8FE3387968CEA
-:1068E00086F50F94C7DA96CDF0F0FD6C265F06CAE8
-:1068F0001F5BDF2717FAE58FADCF7684E4D7349E90
-:1069000047F9D798CDE4FCB3905743E1FAEC7C917A
-:1069100057B34582F5EEB5B44FD905F35A6EC23C74
-:10692000A6BEBCA2F92CCFADAF3DE417D1F7CF2E58
-:1069300062F945C37C1B705FE26224CBA3B8B83D0B
-:1069400082C0B9A467B76D1C02E7109FD54C6807D9
-:106950001AE70F0782785EA419F225018F20AF0491
-:10696000FEFAF28F78FE5ED7F69771DE623E9450A3
-:106970002C00F7F41C36AF253B764F01E21FBE2CEE
-:106980004182B89D98D7B5E4FE4B9C2F064B872FCC
-:10699000E430FE08A31F5FCDBE3EFDF806E089EAA5
-:1069A000C703D0EEBAF523D78B424F8AEFDD9C2E7A
-:1069B00066660FA81FBBB3C3E84715F29E31EFC848
-:1069C000E4DA1E065F3378BF37BAB54AE0E7A2348F
-:1069D000ED4FD0CFC409BE8310072DADF11E047E4C
-:1069E0002F96F879EB294C0E24F690FD10838B3FFF
-:1069F000D1E3863CE5AA6C966F71C36937EEB3C7E5
-:106A0000798804EDC53D066D09ECBCB371FC499C69
-:106A10002F4C4F06301F2EA9337C5E6A412AB3D714
-:106A2000A8BC3C0B702D194DE5694A7F791A067F89
-:106A300017A07ECE2EFF01A835363E3D1ACCAAAB5C
-:106A4000E0EFAF0C7FEE4BF014F8CABD22EBE2781A
-:106A5000025F57F8FC6FCD70FF03C639CCF97B207D
-:106A60003CC6E650FC8D07FA66781479C03B0D767B
-:106A70006A450EC3CBE41C7D5C2804DFB139E3FB1F
-:106A8000E35BC8F1BD47F6C880B792AAB635800768
-:106A90008AD7A41CDACF0D65FAFC4F235E853C34FF
-:106AA000E2D78857910748F1313A278CFE12FD183A
-:106AB000F558889CE0FBCE6A5F7E07D8CF224F5CFA
-:106AC000AC43F0CF240E8F1B35ADD2C2E8B410C654
-:106AD0009D38CB77D00C74BAC87BD0124AA78B09EB
-:106AE000DBAFE2F348EEF1E27A869DD0CAE179C3EA
-:106AF000693FDEE331B499AE8704D733B2FB38E6A1
-:106B000063C2BE2CC49BF61E3980F31ED1DDC59E28
-:106B10003C8FC8A86F83F9B7AC9F17B8FC6A3DC714
-:106B2000F2F85ACB99BEBD37C35D99837CECAE8237
-:106B3000F9AFC8705743B92095D14D6C8EFB6628CC
-:106B40008F1C40DFDF9AD3B74F3D1DEA253D40BC87
-:106B5000E21E1488C327412410B6F09BBD9285C263
-:106B600035C94DD0EF1C9DA8AD82BCB7C044E282B0
-:106B70007C80B83A7B39C02B61916B3FC0B3F51C68
-:106B8000BFCFE53E82E7BDFAF2ABB454CCA700FE1E
-:106B90000DE5977A3E8FFA1CC607D4DE9993C3E6BB
-:106BA000A5C1BC84BD23F87220FB2584AF1BA0FDCA
-:106BB00075F0F5F29CEBE3EB15398CAFEF8776D7E8
-:106BC000E2EB1FE4F4F1F543D0EE5A7CFD28E7EB4D
-:106BD00017AEC1D73B78BFFFC5EB87E1EB47C3F1E9
-:106BE000B5CAE94EF0C59E2363A3215F601BEF2F5A
-:106BF000447E6F80F6D792DFFF049F6F867EAF657D
-:106C0000A78A7E05BEAFC527B1B91E8483B0474FA2
-:106C1000A733BC0BBEA7FCF29F007FCA2F3B39BF36
-:106C2000FC92F18B8AF58CFCD5A7EFBA4DFC1E11B6
-:106C30007B7468DCFBCD9C7EFAEEE59C30FA6E241A
-:106C4000E1F0AA61726404F1CAB1D06FAD1DCBF658
-:106C5000B37674F3634F05BC00B7F77298BD513C2F
-:106C6000403CE1779C4F92BA2B50BE50781ECA0927
-:106C7000D16349C43E15FC9CCF73D8BAC64D701F72
-:106C800004B964777B309FDB91CBE022E044DBBF2B
-:106C9000134EEEEE037CE4F7F71B8C7838C8E7FB65
-:106CA00039A71F63FF42FE40FF05D8BF6A82FE4539
-:106CB000FB3F07E5D047B08ED2079A65585712714F
-:106CC0004783FC1172928CA0ED8BFBB7FF34D8FE8A
-:106CD00053584769336D9F1F6C3F92F8315F2761AE
-:106CE00011955304EC7717DAB3EB55CFB91C9C27F9
-:106CF00061F2AADC84F2202BDD8D7C174EFF43FD70
-:106D0000EBD1FFB01ED0FF83911357383D81FE8732
-:106D1000713ECEBA86FECF65EB8ECBBDBA9C88CFD6
-:106D200065FD3A7207D6FFB961E4C41ED58DFC1427
-:106D3000868F12721D10677127423BCA4749501651
-:106D40007A87B61B02EFD7AB0C8EEB6B4DD9685F21
-:106D5000932857387F262D3766B0F945697C9ED732
-:106D600095FFFADC8F7A2C006F91A722C635E6BD1D
-:106D70000A3C2EEF94C6415CAEFCE0658C93F4EEC9
-:106D8000FF1BC649948CB9E360FCAED758BC44E401
-:106D90009588F157703FB25ACE6F8738EDF91D16BE
-:106DA0008C7FCA44DD5846E7D374C44C7C2807D98D
-:106DB000F965B14F6BDED1DA0D71793309B9670727
-:106DC000F59D1A0774693EC2EEBB2149EC7B33B1D5
-:106DD000AE62F730EAF769E3DDFA7DDAC41AFD3E08
-:106DE000AD88232E256C9E0E8F7EDF76E82CFDBEAF
-:106DF000ED304DBF6F9BBC68AC611F57BF6F3BBA96
-:106E0000A5C2B08FABDFB74D5B37C3B08FABDFB779
-:106E1000FD8C343F5D46D79D2BEEFBF1BABBE15CA8
-:106E2000F47C3EDFAC4DFA7DDD2F76D6E07D21F39C
-:106E3000797C3BC7A7DFE75D2A2F433A266DEC9CA0
-:106E40007333FD07E0A690C0E164C83FF0492E3FD0
-:106E5000FDDCB0497F0E7A71C7166CB7D8A77FBF2B
-:106E60007487BEFC402EBF0786C7BDFBD3410CCB49
-:106E700063D8CCE2FDB237CB40077A7CFC6FE942A5
-:106E8000E57411E1D4D345A4AAA78B8637F796C041
-:106E9000BA8DF08DCED6D38B11BE36979E5E045C34
-:106EA000A99EE4F9386E5CEFC20E893C23F587EBAE
-:106EB000A2CE0DAD700EDD0857427CB8EF6C84AFEA
-:106EC000CF00DF73AAF63CF0DF858E07F0BE1FA26D
-:106ED00069E3A0DD55F263FE83D51F747E4C3BD47D
-:106EE0000FFAC9FAFC985EC8E31A430691C775F019
-:106EF0007F20AF2382CED00CF1C6092E6BF8BC2DBB
-:106F0000EDF55CD4336E82F19E3F10D71A5A6B8D2B
-:106F1000AD24EF1A718103B9684769789F466937D4
-:106F2000CB73234AB71DE2BFE1EE6F349C6B3A0A84
-:106F3000EDFFD9FBF184DD48EDF43FE632BDFB2ED9
-:106F40003CFBEC746EB7097B7BA07EFAF25C0678A2
-:106F50004A0764CCB30A4851AE70F70D9DCE95C276
-:106F6000EA0DAA274EE73A42E25BDFBB7018F4074E
-:106F700085F717F0DE66A3FA5B1A94FEEE05386D0E
-:106F80008C8E45BA0EBC29FBB26883F356350ECE03
-:106F90009F1BEF2711794FCD70FF08D52765E7B309
-:106FA000E3AE96675066B89FC6788F47EB589E67EA
-:106FB00092C7D6F96B7E8FA0334FD29D9711F1A85F
-:106FC000A6752CFE0AF70E7686F4E3CC6387566E20
-:106FD00056CB9D790E8877B178616B8A847642AB07
-:106FE00024A1DDB039BDC29947FB3F945B3E14EA52
-:106FF000D9F9B84E88458FC7F33E381FD5705EEC7F
-:1070000018AF7F2CB7029FCE3CE16FD97301FF13FD
-:107010005537F66B91C3EFAB8FCC63F64F35F0B4B9
-:1070200023C84FD7734F8325A9FF3D0DC6FBCFDC87
-:10703000D9F62E5007C67DCF17AF754FC3BEF0F7F8
-:107040003400DCA31382FC5092A7BFE7AC23AA074D
-:10705000F741036FCBAEADA4FFBA6FE6785CCFCF3C
-:10706000853878FEF728BE9FD2BF3E83D39601E2D3
-:10707000BD13D5F26A80F307E99E9B010FE29E9D46
-:107080000E8BB606FC8FC04B04E791ED2307A05C86
-:10709000E055318FBC35C51B8DF7011499D09F5732
-:1070A00037B51D8C4CC273B609921A942766857841
-:1070B0006D94CE16C2655D60DFF5CC3D60A3DF1D2B
-:1070C0009B6F93E0FE9636D256190B76D766123632
-:1070D0003E58CFE9696AF9018CB33B02ECBC5FFF13
-:1070E0007A26E1276AB08ED280364E4A0DCA251420
-:1070F000B9E03F75997CE1E2B559E9950BA15D8155
-:107100008F848DFF55F37B66EA54CF32ACB7CF8FB7
-:107110007E518390EFF34D04EE37BC9DCBF3DB370C
-:10712000B3BC5C72F9CA15B924787E8AF64F403E2A
-:1071300035CCB4E1BDB10D9D2978FF16F14878CF6B
-:107140004B53E7310F941B8A8BED106F76BF4F24A2
-:10715000B8970DCFECA11C54C8A742DFA2FD9084C4
-:10716000FBFD33385D8BFB94A81E591F4DE1DEB04B
-:1071700079D501C8EB7EF779DA07FD7442D64EFC6B
-:1071800090F6FB5DAAC45AC6C2532175188F766269
-:107190003F33793FDEBFD171ADC171BFDBF926AEA0
-:1071A000E7849978AD947ECD156C68F30FE230DFFB
-:1071B00058E4AFDC616DAB063DDB6B0914C2F9A985
-:1071C000DED7DE1B09FBD41FFE9F0B36B08FFFAC52
-:1071D000046CF0FEF4C37FB4C1FDC81F3E2CE3BEB7
-:1071E000DE1CAE7704BC9FE7747E31CFF30CD0E792
-:1071F000BD2BBF2D09CDA3272D0EE49FC53E1953EE
-:107200001E04DF2DDD110D16515FB9B13D5157162A
-:107210007AA411EE6B0D43472738BF2CDEB5C502AB
-:10722000F70B5CCCD376C1F8A715463FA7F7D97CFE
-:10723000707FA298CFDC5D4516B04FFEDC1941FC93
-:10724000A00F956E333B4FE6AE95283D681CEFC608
-:10725000791E7E3D1AFB5BF014934FF574AC160A51
-:1072600057AD7331CA21E33A167CA84E86731C0BC6
-:107270001E9508ECAF40FD8729DEB4961F639EA8DB
-:10728000719DF55EE37D766E948F0D1CBFF3D6E99C
-:10729000BF37743E8EFDCC27EA7AB0A717B419BF6A
-:1072A0004FF90CEC9F06833C7B278FDB5B25A414F6
-:1072B000EE9D39604D8BBBDABDAF6757DA91383F31
-:1072C0005F69C5E7E995049FCFE4A908F7659DC705
-:1072D0001E04FA59DEB1DB02FD1CF48D4F82E3A3DC
-:1072E000533BA72860774DE5FBACB3F9B94E74AAC0
-:1072F000D979CE1EC053558CE13C275F771DC7035B
-:10730000B126229DD5C17A0BE1BDF275E87ACE1F78
-:10731000498BC17D3AB1AE52BA2E79F0EB12EB1126
-:10732000EB13DF1B65763FB0B19DA0F36738DDCD71
-:10733000DF765BEB700A8A35AF7D36AA87F9A968DC
-:10734000DF5772BC555A1F47FBBE92E8EFA5A27FDC
-:10735000C7817F05BD35109702CC6BA42B816712C6
-:1073600063F6F2FBF9D1FEEFA3A7CE7F43B8087C0A
-:10737000537E71F2FD3427ECA751BAD2D9DB948E3B
-:1073800074E5056DFAF297E69E51C0EF0D86FBA1FC
-:10739000BE34E45F88E7A5BC540607D53D19CE0787
-:1073A0002C209E56B6EFCACE1F9D56DA0EFF10F85F
-:1073B000701BE3833F73FCB7E47B46E783FE52DC3C
-:1073C0008520EF2B560F939368BDFAF5921DF86B4D
-:1073D000DEDAA2C9C09763891BFB9B9D18DE7EABDA
-:1073E000C8677A646EB39958A8DD3F978E01726EB4
-:1073F000EE3E19F91EF2A6A60D817B26183E1A1F35
-:10740000DD6D19469F8B9A1B98FDE0637C23EEABE4
-:1074100015F427E4FF92F5FBF1DE0DEAB7E8F8ABCF
-:1074200009F2BD0B818F0DEF9B6F463C3411F6FBCB
-:1074300005027E37E573BBC1455C409FDA83362B7E
-:107440009C17B9D6BA49FFB803C625CE1FC940BBA1
-:10745000F3BCAA0E857A1A1DB31BEC48452B85F7A1
-:10746000145EA8A702ABA2F11ECF939764A2427E3E
-:107470009B5D2B053BAAE7FD9178CE5DD0AB586FA5
-:1074800093753DD26B13D1FBA3F5D4F181FDCFFAF7
-:10749000ED8998D744FB2FEC007B63BB19ED092FD6
-:1074A00059E184F3F69E47CC2827E776C4A33F3CF6
-:1074B000772DDB2798BB2B1ECF07527F14EF1116B9
-:1074C000F838B9B6D2320CF19582F7F3900E3D9DA3
-:1074D0000B3CF5F7270D785AB7FFB053EDEF5F86F9
-:1074E000E0E9D400783A158AA715F95C8E703C91D2
-:1074F00087B9FCB9EF5006DC5F75BE3912CF83182F
-:10750000E950E82932FF06CCBF1271AA9AE10C2F8C
-:107510004471619EE285F5E3116F467CD5FC631EE4
-:10752000E285BC6FC3FB8B67A7B17B5BEE9518BF91
-:10753000CC5E33A506F4F9E3F9CCAEF93D955BEEEC
-:107540002C6A8F53B9E5A672EB8F549E41F9DD95F5
-:107550004E2CBFB752C5E79F5666E3F314DF5715AD
-:107560007C4409C10276E3867C26C736E48BB8E109
-:10757000034E302D6AFEF1C7F1F03B0A0EEF943B4B
-:10758000AA471272AB5BAF0F67CDD4EBBB1EB37DC6
-:10759000B213FCDB47D93D4C733D37EAEA1345B5DE
-:1075A000C07968923D2EF81EF94DB5C07DE977D5BA
-:1075B00026EAEADFB12E5957FECF7C15D77D5B4D09
-:1075C0009AEEFDDD7579BA723DDC9B0874AE4E40D3
-:1075D000BE7980E75552079DE1859F23FCBAB974B7
-:1075E000E8F7E97CBF3E6AC6EF467C08BCCEDF24E4
-:1075F000138DF6376F13955F748AA7DA289E68BBE0
-:107600002F4ED8D00F69DD35EE9D09B47C729719E5
-:10761000E30727D726FE04ECA793BB1CB1843EB535
-:107620005699DB1976BC4F49F45BB976159E87A94C
-:10763000F745B8D09EE8F2FEBB28ABE0B7C2248184
-:107640006F8ECB3EBF84F863F1839D11680F9FA6B8
-:10765000761D5C3D7B5A226BE10907E6E3E8F76F94
-:10766000BA1D3EE0EB9A7FC86E27D0D3CE48767F16
-:107670000838C3F4FBE7C732B63E86F4A5B6FB91E3
-:107680007F23D05F98D7C3D647A4B1C980FFD3F179
-:10769000C41D4F27D1B8E2BD8F148AA7C599DD85D7
-:1076A0007EDAAE2EC5EFB893B63BBBCDCCEE97A33A
-:1076B000FDDA69B9F197115B983C710FBDAD2014EB
-:1076C0009EBE425877D670CF87F9B07FB0D057882A
-:1076D00072ED6107F29511EEA72C1AC2D70B7C2030
-:1076E00005E56490CFD87E10156EC340DECC33BB69
-:1076F0008680BE3AB5DE8C7629D527B1B7611C6687
-:107700000FD2F129459D0CEB3EB52E8580DC12E3AE
-:10771000CE5D2FF37B42285D42FD0DB2466D072200
-:10772000F496779DA491A1FDE9E6FEFB4A312FDC9A
-:1077300068FF8AE7979457B5103B62C96BEC7E7E71
-:1077400052DCA3CC2C085D07FB7D05A24DD0E56B78
-:107750002E4BFDED473126B46BE2209E7EE6B88CC1
-:10776000747626B5ADC44949FFACE940C9F769F95B
-:107770008B69DE4F155ABE6FB416554097B4D4B41A
-:107780007E14F84FBD9D9FFC04EEDDFBFC45331CD1
-:1077900087274B762E1E8D711F6E7FF7975BE2FE5B
-:1077A0003FF730B83F65A9DA8E7A5C854372B87EC0
-:1077B0001FCE53E875FB9312D858E493F1B6C7C0B7
-:1077C0009F9E67389FF28999D909230A989C12FADB
-:1077D000FE1E5E9E6762744D5E97300F9CF07BE5E7
-:1077E000853E10F25AC8FDFC02665F08790D997655
-:1077F00020B716C2ED2D749DCB7644F87C29D8D6DF
-:107800000E705CCCD0441617A8D86E89E5C5A78148
-:10781000971A4837CEFF73B36F61770AB4DFB23679
-:1078200001DB9B5D18A7E5FA05AEB506B9D4C0F932
-:10783000AFB14DF2F9917F989E5CC0FB27A06742E3
-:10784000E4583FFD62D02B0BB85E5D400C71DE3614
-:10785000BDBEF344DB705D4BE8B8A03F83F3A2F6F6
-:107860003385DD42CD77783ACE5B72F9C2CCA38105
-:1078700004FC907FD7B88BC5BD8DF332AE63B0F3F7
-:107880005CE8BAAD2ABE38645CC3BC05BC31501C90
-:10789000820701F7855E06CF859D12E2EB2FDC5E45
-:1078A000A37F189F36E2BF8178A6439E42C39354BC
-:1078B0007EA604E941D0C1E2DD3E0BD8CB5F90B695
-:1078C000D818CA07CB36EDBE63A20AFEF331F443E3
-:1078D000EA12FC19A6784212BD2F3D5D73D3B5E3C1
-:1078E000FCFF2A38C12AE07E5A6C47E1B2609BEC6B
-:1078F0008E2CD4D5E379DA5E84D722AFD70271D04B
-:10790000453CAE78AD793629EC3CEFB5E7CBE0F8F5
-:10791000AF9EF7D3057A3B36681F6584F5B7FAEC5E
-:10792000A26BE8E30FCCFE91A08F032315D4475F31
-:107930002BAEF7CA93403F67A0DF3090BC5DC8F51F
-:10794000F202D0D3F4F9E9A6BD786EEC2F4FEEC564
-:107950007D43CB8B0B62C15EFE74D3BC9F40DEFCCB
-:10796000A7BBE6A15E6E7846E865CD12AAEF2B377D
-:10797000D53FF77F804E7744E20985855D1AB7C70A
-:10798000A9FC03B9B889C93FF224938F0DB1ECDE8D
-:107990006FAABFB2A0DE830BB52CA0F790F7A8D7D3
-:1079A0001E9CA795627B62F7B37B21ED7ED05F4280
-:1079B000BF0ABD7B7498D655007A413EFAEE4374F7
-:1079C000FDE7F6C818D36994B78C82DF4318488E58
-:1079D000FFF3F036F5C13B6510F09E0BF0467B8857
-:1079E000C1FBE3750CCE9FAC67706FDD95160B7E07
-:1079F000F0C7EBD2D00EFA785706C27BFE6314DED6
-:107A00006807AB7A3B681D8537D8FF006F3AEEDC1C
-:107A10002E95C3DBC5E0BD8EEBA1F5EC39BF1F5C35
-:107A2000BD986FFAE0F3112ED0EFA723FD0EF053AF
-:107A30004EEF9609ECE7F7D949DC9E1170FE86B44B
-:107A4000FD3BD855FDEC9B0D11C44EFB5BFC920D2C
-:107A5000CFD57C2E950F05049C6DFB6D2C8C171CCF
-:107A6000BFCFAEB954106AD70C123FCB8907F3DEF3
-:107A70009777FEF604D8F570BD0AF8FDCBC539F846
-:107A80000EFD397849059906210A97D50A7430C246
-:107A9000784F8086BF0F7131E3AB392B909F0399EC
-:107AA000A1FB414D517E33C4A302BB25C477E30340
-:107AB000E5B1E504F6B39A711E8E42A69F25B71B69
-:107AC000E38C11946EA2E878CE4215E72BA97616C6
-:107AD00077DC4CC7B505E76B7C3F1D0411E8F71850
-:107AE00013EA77E3FA27F3711A6513FA21CB2CCC4A
-:107AF0001F11791319FC7B4621F3EBF30AD93E439E
-:107B00006F2441FDD1BB21DAB70AD75785F14F85E4
-:107B100030FA5604DCECCA97BA7BCA797C017EBF86
-:107B2000008CEAF9113CFE4B552DB4BF87B7BFA7B7
-:107B3000ED6DDCCFA39ECC2F40FFCE6E8970813DD2
-:107B4000EB85FBAD28DDFD388AEDBF90A43805F844
-:107B5000EA6E2E67EF697BDC03FA68765BB41B9EE6
-:107B6000741C2FE1F1D662D8BF1D6EC1786B9DB534
-:107B7000E74530AFEF757EF23D2B5DDA2A13B35F38
-:107B8000562510CC3B1943CD7888DFD24FFBAE246D
-:107B90005E8D7EF4F1E46510D765F7B579519EC826
-:107BA000265D7919FF5D81BAC2CC3B9F1C41C81F7D
-:107BB000885A00F85E06B0017AA88FC3F8C0AD10ED
-:107BC0005F4E80A782743643215E137BAE8BC173F8
-:107BD000FE2CDE3C9DAFFBBB13883F8EAED7FFA6CD
-:107BE0003EDE7DA7DFE4CFA278B855F1EF07BA36C5
-:107BF000595533F8079E1A692CF8CDCB560F6EBE37
-:107C00004D854538DF6526139BE74312DECB700FA9
-:107C10006572A0CF390AE992C732FC01FD3525B063
-:107C20007B8003F731FA16717681A722DA7D287CF2
-:107C3000EFE1F3A3FDAC8B85F696F0F1A51F160AD4
-:107C4000BF98D99D4B39BF2E15F4B64BCFA7CF02A5
-:107C5000BF001F819D4BE1760F7F0E44EF9B38BD27
-:107C60006FE2F4DECACB831DAF3182F8437FAF45AC
-:107C70008C7B2B7F3E5D988AFD8979087A263C3E75
-:107C800065A29203E8E854DB1AB49B1619E2C524F6
-:107C9000348E25872BF7C91FD315785A02F3613E1E
-:107CA000D277225D40D7F758DA33D8BD12FA7A621C
-:107CB000FFB70E6EEEC2F33A44F77B0AD5720CE6BC
-:107CC00013D549EC5E99DE729BD744EDC50FF8BD24
-:107CD0000EE79BD9F9D0BA87F8EFA0C43D381DEC68
-:107CE000C3BA588B02CF0FF8FD72F7926E5B4A4A07
-:107CF000D03E692D97F9EF6ECCBDD39D0FF74410A0
-:107D000051DEE81E8151255E6E780FF63B665EA659
-:107D10007480E54577BAA9DCE83DC4BF7B6919F0FA
-:107D2000F888A0E746ECAFF729F1FD3E567E547C7B
-:107D30007F9095FF4DF4CFCB1B0CDF5719BEFF9CF6
-:107D400095DF2C7CF04E2FD8B57C1FA7EE0609E5F9
-:107D50008A95D35BDD6A3FC2B9CE74803D2B881F04
-:107D6000CED75EABDE37851E6BA103EE37386503D9
-:107D7000FDFDADCB8DE5F3F9DAF1425A7FC96D9285
-:107D8000D702F2F2B82F93CBF7B079B9564EBF179E
-:107D9000C6D0FEC607E14DFBF9F09FE96775FF7E8F
-:107DA0003E85795D6F3FD35D6C7D21FDF4FE33FD33
-:107DB000EC75E9E723ECA3A963DD5163403E54DD94
-:107DC000A88BFB2DFD912B0EEC2BF20EFB1D93A52A
-:107DD000ABDB478DA3FD2FFDAF57462D0CF1C797A9
-:107DE0005F92891BEE47B824E1F38BFD7FB2C0F9A7
-:107DF000FCE5FBF65B26E7C3EF2FECB75486CC6BB4
-:107E000099C8B3243DCA8C10FD1E37C6C4E506FBD5
-:107E10001D87A5FF7546017C2E35B57FFA0CC48100
-:107E20006E90C2EED7FE95AFEFA301CE8339C63078
-:107E3000F95756EC4E82755E041944EB57AE09BFF4
-:107E4000CF3F670C8B27D6F17B95E795D8AC2A8579
-:107E5000F3F8E36C7F7AE1E694B110E77514548C83
-:107E60001A03F31D305E1A60F1D24E162FAD4BE8A7
-:107E70007E00EE31BDEB574F6D847B4DA76E147CB9
-:107E800042F0F7726A2204DFEDBAB3AA0CE35F583E
-:107E90002E1BF3C246E09B23FC5EF1D9A5055120C1
-:107EA0001F7A52A24D762A4746E4D7DF05F3985D44
-:107EB0007AD364785F1E61CBAC677177A48B11F9BC
-:107EC0009E62F80EF521DEA15958FC4B7B4BC6F89B
-:107ED000975618AD85DB7F1ECBE170D718764FF132
-:107EE00011139DE7D8E03CC4F8D46079A09BF677E5
-:107EF0006AF5B022B897BF25BF7C16D2131FBF25E5
-:107F00005FAB86B2189F2EB710DE0F761E159C2E23
-:107F1000668D6178F394517A0BF11B675445EBCA77
-:107F2000336B13893B340E3B3359579E5597A6ABA1
-:107F30007FF7FC3CDDF76911DDC5CDD7610737D987
-:107F40006C51608F7DD8F9CD7FDF03F6DD36D92502
-:107F5000D1F52C7E6DFB7FC3EFA39C871F5C60E790
-:107F6000AF301EF6F911F67B7FD4AE5342F775CED3
-:107F7000916ECC2B0CD92F08BB9F2AF60B96DABB3F
-:107F800030FFEF7FBBAFD33286EF178C2563411FE5
-:107F90009E6F7E17E370CB63D8BACEBDC2EF2107C8
-:107FA0003D42E9FC666808F7855D5A85BFEF53C915
-:107FB0007FBF75D81895F90523EE53E0DC77137D64
-:107FC00082FC9F4CE5541CA593EEFDA4601FE45D6C
-:107FD000A4D8309FBCF1D2ED18E73E12E5CDBF8F9B
-:107FE000D65BBA6E0A96975F8AC67E7F2F774FC69A
-:107FF000BCE697D9EF214E4B9EBD1AE60FF5EFA7D1
-:10800000E34DFBD5CD3500A7E5FBD8F9A969F21FF3
-:108010008AA19F656D53B0FD34991C91A8BD10775E
-:10802000E91EEC771AE87A5A964B6C8F81FE952DF3
-:10803000FECC6741AE586C28579A2E4562BBA99575
-:108040004C4FFBC6303BC6DCC3E6557DE936FC2E03
-:10805000F0FFC29854DD3D3266C73605CE27987BC7
-:1080600024AC7FCBA53C7C8A75BE95FD3CDE576277
-:10807000767C3D19F23ADF4A92EC687E18E4EE8590
-:10808000E6D23812462EF58D7389E501475C627998
-:10809000C12F14B93B81BFA73FDCA3C0FE0E89B13D
-:1080A000DA015ED32714A90B43F8493E709705F017
-:1080B000627EF29805F47E047D56867C6F14F9EB9F
-:1080C00006B97C80CB01717E41E819A276E87E5F1B
-:1080D0004DF0CBAF38BF8AF6DD40EB80C79722D09A
-:1080E0009F7AA3487B17E6DB5DCE7E278328DDA33E
-:1080F000605FE55F357F8A67AB84F67E0FE6C54F2C
-:108100009FA09A60BFE0FDBE7530BEBDD63A7ECB63
-:10811000EBFF5E262DD0EFEF274DEA76D3FEF6FF7C
-:1081200070DC3890FF62DC2FC6B073C3C41EB80C7D
-:10813000FE5DD3EBD12AF0F73470968A83762D7DDD
-:108140008FF7E535BD1EB155A2DF9B62A97F4BC7F6
-:10815000AF7C23D20F74BCFF8D48057FA7A858FBC6
-:1081600002E465E51B5955E0CFB93B231482768EB6
-:10817000FB2CCAD501E67B2D3965A433C197DA3AC9
-:10818000C62FF59C4EE772FED3381F5D681E8A7CB1
-:1081900078E1613A69D80F7D582AD80776816AC399
-:1081A000FB89055F4E033F88BEFF7F46E48E2C00AF
-:1081B000800000001F8B080000000000000BC57D40
-:1081C0000B7854D5B5F03E73CEBC9299C9E44942C0
-:1081D0001E9C400841024C26218410601202A2021B
-:1081E0000E501530C88008110909515BACF6CF84D8
-:1081F0002410452D56DB068B74C04751696F406CC7
-:10820000D31661786863F5D368EF6DF1D6DAF8B804
-:10821000888A3582F5A3B728FF5A6BEF9D993349B9
-:1082200010EDBDFF1FE53B5967EFB31F6BADBD5EA2
-:108230007BED9D79E312432D0A63EBCE253296CC7C
-:10824000D83C95752B498CD59DCB65AC98B1F5E79D
-:1082500092E97DFD393B3D579E1B47EFADE754E664
-:108260000378D53985F900BE6AA633684A60EC42C6
-:108270005120D3930AEDB45C3E87B9180B6CCA2821
-:108280000938189B7F57AF664B618C392CEEC7A11C
-:10829000BFF96545E9ABE1FD05FC99C158CB9125D6
-:1082A0004C7742BB297E8B0FDEAF82E7CCA8F29BD6
-:1082B00018F37502CC987B765A097CDF9A6BBA87E3
-:1082C00045CA758F89B14958DE4CCFF9B2BEDEC5BB
-:1082D000581A6337B819FFD90883CB60CC29EAAFA5
-:1082E0007484479BA03D7383DDB309C67526459F03
-:1082F000CD006EBC1B004041A3D93FD309E36EDC27
-:10830000AE7882F0F98DA54E1B8379969E68B004F5
-:108310000A23FD2F393781E9808745E7F2E8993A4A
-:108320003E3001F1B0E2DCB584AF95508E4FA69798
-:1083300099703CB7D9F0771C10C0A58CDD2AC6F720
-:1083400059C3E461DF81FE3F7BD94CE5937CC11BBF
-:10835000703CE690D5B30BC673CA1E50198CE75417
-:1083600036733F08433C65664137D0EBC60E950532
-:10837000A1FD55F00CC0F35422F3257A119F30CFA4
-:1083800002DEF605F8F7776D5B0E1B05F46DFCD386
-:108390005BDA48C66ECEEF991086766B2AC3A9D7F2
-:1083A00041BBA71F337B82D0EFBA23AF979AA0FCC3
-:1083B000C35CDF30A632366678600ECE67EDC2D081
-:1083C0002FCC00DF72DF33AE297A049F9D5A78B438
-:1083D00006DF77021E8330AECE7BD53921A2178B04
-:1083E0005F301E1F803DA83A7B81124C00FCB1EA31
-:1083F000A97CDE363EB6B5E746117ECE3658C71F9D
-:108400008076CEEA4E0FBEAF3BB788DEDFD27E0568
-:108410003DCDBD5708BE8CE7FC9AB96C13F2599D4F
-:108420000695E1BB3A47422808F399F76FC07F8071
-:10843000F2F50716F82B91EF0A14CF6878ACDB76CB
-:1084400085E0F3DDF797035EE77D92E26981F7BF90
-:108450006A4A076445F87FD6B905542FE1DCF5D4A4
-:108460009FE47FABE07733F27F14DFC3778CC17773
-:1084700081A2C09D88A7AAA7FFF9CC7FC2AB2BB56C
-:1084800070FE4F52F0E924FE89AC039BFBF15C5A6D
-:1084900007FAEA283E528F2EB1E8802FF3436FD3BC
-:1084A0003AB0C2736654F97AE4EB42C44CAFB6D02A
-:1084B00019791FFC9AFCBF5ED49F6365CBFDD89EE3
-:1084C000D69313DDDEE1A2AA073D50DEE151787BB1
-:1084D000FF43E3063CD910BF307E1FD26B7E996EFE
-:1084E000BA2717FB91E3E77CF255E36F13F55F556D
-:1084F000D9466CF7D519337A7CD0DE913B8B8B55FE
-:108500003DD2EFD31E0BB5370F6887EBA8EF396B61
-:1085100068772E8A11C614A8FFC9736343F7C01485
-:10852000DF627DE7713CC183F13ACEAFFE503CD5AE
-:10853000AF8F4B0829505EEFEACBF7C378661EB6C3
-:108540008791AF8E1CB66B0CFAAD28B9F169C4D314
-:10855000CCC363AA15E043DF41ABC6A0DEDF27F83A
-:10856000F6221F0C357E39BED8A79CBFE42BB95E1E
-:10857000E4FA90EB2176FDC8F570D5564FC277909E
-:108580004E8098C771FD68C1BD388F3A3DBE08D78F
-:10859000A55C47EB0F28B4CE40E87A46EB917524F2
-:1085A000D74D649D98080FF3849E186A9DD48975F1
-:1085B00071935817723D1C533B1F2C87EF661605AD
-:1085C000FE827892EB62DDFE58BD30245F31E4AB71
-:1085D0009B521A18F2551D3CA3F9CA3AC47A78077F
-:1085E000F923F5D2D743CF25F2D3DF919F26FDAFF4
-:1085F000F2D3DF916F06E1A7CFFF157E8AE597B32F
-:108600000D7F2AD1613C674B40CEE646F8EDAA9734
-:10861000D8F803F09E8D727A907FBAE3F83CBB2DB8
-:10862000D9A116AC778135201EA5FEBF09E99E1C95
-:10863000E153AF3730BC685284FEDD71C1C20D8595
-:10864000974E676B4A8FC55788F4EE31E8FFBA2121
-:10865000E83CA2E8EBD1D929EA7F159D3D455C6E47
-:108660003037D0B184E8A7235D63E98E7445BAD76B
-:108670001FB2EEBE185DD79704A6160D2227988F5D
-:10868000DB0311BA581721DF9C0D83425386A6AB3A
-:10869000B983E35DC26D614DEADB64D4B7C02F15C9
-:1086A000D8DF37E5977933E1D7E1083EB5D89705AC
-:1086B00074FFBE80D92F16237DAE2D93E54F77F83A
-:1086C000F250EEC0EFE5D4838FD908BF1C0EEE3D0B
-:1086D000510DF5AF7AB0BF3C88E5B32A12447BCC8C
-:1086E000A7B048FDEBF73D79E25E9AC736AE0F02C0
-:1086F000BD9A7F7C145C02B0330A2E8B8177F0FA2E
-:108700002EAD97B9A99D105FAFD0BEE2E5FCE38F17
-:10871000B2478092B313D19E3CA0B8EF01FA2FADBF
-:10872000F8C482F48ACCFF00CD7FFD4145C05D27AF
-:1087300070BE4B0F70B879DFC18EA026DA033CAF54
-:10874000136836772A3E15DA5D57A68446E60EC4CE
-:1087500073739151DFE18F66FC9E5952BEDEF7B80C
-:10876000BEE9FB91F47DD8FA35FABFAE82F9428EAC
-:1087700081F51E90EBEB3CC0B27DC0E522985FA86E
-:108780007060FDEDA2DD1E9349E0EBB50EC45F8F76
-:1087900045E2B3A7C35701F4671C7E745FCFE26064
-:1087A000211FBE2F66FE171B7F5BFFBA8FCC5F3782
-:1087B0007E1FBE18FEB60EC09FE09F5A233F25685D
-:1087C000FEE367A19D8414C58D76F17ABFFD5EB48A
-:1087D000FF23FCF167E28F1E3BEBE76723FFBFB986
-:1087E00018F97F3D93F5DFEAC0F5E337F5D7E7EBFE
-:1087F00041F2177C5F00FC8426327EFFDCBEBF7432
-:10880000041D441F2A2738EF22EBA13306AE8859F6
-:108810003F82FF69FDA29C07FC8C1E44CEBC29F060
-:10882000FBB1C216A39CECA9E27662CF48FE3C5F86
-:10883000C4EDC2F7041E4F8BFA3D715178C88AD03F
-:10884000197EC2E88744CD9BF0B42445CEFBCBC54E
-:108850007361DE3D49BCFCF3A2FFEE086645E0D83B
-:10886000F6CE157D497C1369FFFC09C4EB1281B774
-:10887000F3455F9C107CA5E0BAAC230601BE38A08E
-:108880000455F413902F0699F7F1817C158CF9DECD
-:1088900067BEC8F7BF1FB82E7D31DF3373C9D7F964
-:1088A0005ED06D6E0C5DE7C4D0B53A06AE9170C86F
-:1088B00020FFA45C5CD9F5405B1ACCE3963D0AAA84
-:1088C00099287E762CC1F5798B5BF2AFF30DB4BBA2
-:1088D00022FCEC227861A7948709DB511E2E407997
-:1088E000581E8117A1BC20D8BDC437315A5F24520D
-:1088F000F975EDB27E12C14B5B657BC9DB7D5A8495
-:108900008E2C98B204FB5B5222F44530F50DACBFBF
-:10891000F620FF7EE2FEB4372EBA1EB6C5E06547EC
-:108920000C1C8CA9FFD057E897D698EFEF8A29BF87
-:108930003706EE8881DB8DDFAF58A5D03A5C01FCAD
-:108940008084F8AA7539C3DB6FA7F6EB53C541766F
-:108950009B615D5DD5C2E12BF68F5AD2EE8882BD58
-:10896000A397041D91756166FCC79AC2685D9887DC
-:10897000909793BDB1EB42CCA72056DFF2F2BFE255
-:10898000AF19680733835D704C35C2475439EEE246
-:10899000376E2BC49712F62EC1F8CA553F36CE0B50
-:1089A000FC55017B96545744D925C1894B70FDCBAA
-:1089B00079CAFAB3BFB8A0627FCBBD13973C06E576
-:1089C0003555E1D10D30CE9A24FE04BDA6A2DEAC11
-:1089D00017F198D9CFA97ED46B3571E1D18D85512E
-:1089E000F3649DF938CF2377AA449F600BD007F03A
-:1089F000B492814300AED99184848D4F40FD63775A
-:108A0000AA1B518FBEB531390DFD9B835EEE2F1C25
-:108A10004B18917613C047E2975B74A87764CB2C10
-:108A20007A1E557D9BFB60AD7D6FFFF4258EB1589E
-:108A30009E40F8B9C35BBEA419F8FA2EAF4EF80CED
-:108A400024B9D3BAD07EBEC7CC1ED769FE3B896F8E
-:108A5000EEB316A1FFBCA2795C1ADA932B7FB86043
-:108A60007606D45BD966F628548F4DC07107EE990F
-:108A700065C1F255ADE219BC9C9E87BF7CB4C505AB
-:108A8000F5FB1E513CBBA1FEB4CF3A5F9A00F09AB1
-:108A9000F6511E24CDA17326E6867EDEE918135218
-:108AA000811FDFB537BC309FD767587FCD79FD95E3
-:108AB000F925585F756F82FA27E13DDAC327EF5633
-:108AC000772B382E97334E81299DFC427F05ED5A36
-:108AD00028776F82F727DB6E4E433BEBA4A2BB14D3
-:108AE00098FFF6FD7397A403BFACE9B00A7ACECD28
-:108AF0005801F35F61EAE717D21FAB1339BCDD3BC6
-:108B000077C9E330FE93DBC7B810CF89C5BE87BDF8
-:108B100080E7B78A7D3FF1A6E238B99E3AFCA5BA54
-:108B20001CEDF1DF9E5E9986FCF4B8583F87CEAD10
-:108B30004C5B1965EFACFE5823BA1FB6E8B7E138B5
-:108B40000FC7652BE82F03DD9317C0FA5D25FC0FD7
-:108B5000E0DF8DCF0C62F704BD2AB57B646B6A85BC
-:108B60006EE0E3EBDF40BE24BF01E05FEEBF6E3B93
-:108B7000EAB5F7AC1BD9BBB8F8EE828229F03C66A7
-:108B8000A7F89579AF3D64CFC5F8A76F36CA3D9673
-:108B9000DE99BFD019B5EE44FDBF049D54FF2F50A0
-:108BA0001FFDB7BF04FFEC648E8176FC1A973388F3
-:108BB000C6C4FB4EA78674784B6B3A79077CB7FA2C
-:108BC0001133C9FDD58FA4DED587F206F805E3631E
-:108BD000B1F3528BCD34AF21D761B0D6B80E592D39
-:108BE000C9EBA1D661CFFE35175D876B849F32FB41
-:108BF00011B31FD7D19A494E8D81FEA87AE4F9C7E7
-:108C000091DFD76CB07BAD30F0358F58895EBD4EAB
-:108C100067D00DE50197534B84E75B82BEAC98AFFC
-:108C20009B992AD36C5E7AB6629CF40C8C2719E06F
-:108C30000F363EF8A3C950ED4316BA7632E0EF0C7A
-:108C4000120CF072E6804AF143A6F9B479201F6B4A
-:108C500019970B752F3E63A9C4D935AC998B7EDD6E
-:108C6000CD21F33BBDC267BB20A689F2B49EBF02F3
-:108C7000BD6A2CAF67F77EAA4E2036B6E07AACEB21
-:108C80008C296FB8FC7D8CBFD433ED9D5E19AF8508
-:108C9000717CEE75A69C8C4771C8BC802176A6C1FC
-:108CA0009CCF608A6B1CB0AE60BE33772834EE3543
-:108CB0001BD59015EACF4CE671DFF79A80FE63680A
-:108CC000DE4137C06B1EE27A660D534236F8F5F28C
-:108CD0001D1B345C0FEB857C59A1303FF2F7BB764E
-:108CE0004F0EFAEBAB1FB1137ED7ECBCF98FDBE173
-:108CF000BBDEE67929D1FEB143F005B4CF6C4991D2
-:108D000076DE6FFE5E0EF2FFCC9F829F0BF35D93CB
-:108D1000C87EB12417E99591A33B22F5D66CBA33EE
-:108D20009FD7033F19E6BDE26E95E6C19EB592DE80
-:108D300083B59E4E7259E07355EB8B164B21CAE9F1
-:108D40007B7B54A8FF0EC0AA83F0151478B420BE14
-:108D500096E3B719FC9BF4526177EB24470238BFC6
-:108D60001A93B27C21C9F53E0BAEEBF26285C63395
-:108D7000B198DBB32B723C37501CF97EAB07E5147E
-:108D8000FEA8721CE057D5997A56633C97FDD24AEB
-:108D9000F191FA56BBCFEE22BFC3B71FC7A731CDA3
-:108DA00002F858A77379512EF8B05E5F7039F20D52
-:108DB000949FD0707FC5C9E5625D22E09DEB639F03
-:108DC00009FAF9047F1BC5DBCD9810D5BF22DE431D
-:108DD0003BBA2BD26EB789B5639C05EB8F9D80782B
-:108DE0004CBE76318EEFE72AAD6798FCFD6568E7EB
-:108DF000FD5C2D46FF76C5DDC7667720BCAFC88D0C
-:108E00004DAEF8C51F486FDC22E8DF8BF63EEA1155
-:108E100080F7C1735131D7FB0195C77D16097C4995
-:108E20003E90E575779B79FCBDCD4A764C5DF39F0E
-:108E3000A8DD3A674F1ACADFBA67CDA528A7AF15D4
-:108E4000E35ED99C5D7102F86AA539C1ADC0AB750E
-:108E5000C1791684D76D53088E7C979A837CFA511A
-:108E6000EBAF5CC83FEFDAC3A3511FF56DB07B7663
-:108E7000E30444DCEDA3D6D1BB313EB3CADDE354F9
-:108E8000A07CD56DA392507EBFE50E5BB0FCADCE4D
-:108E90005C13C23EB7BB02619F3691E08F40947570
-:108EA0000AFF13F96DBDC2E9BC6EEF31CB48E8EFA4
-:108EB0004E31DF8F7FFE877CD45775393DF9A85737
-:108EC000800FF23311CF4F29A48FD7EF557DF609CC
-:108ED000113E588F7C00EB6EADE083F5077EF51DEB
-:108EE0005C0FEB91FEDE817C047C7A9CDEEFDF354B
-:108EF0009BF1EF8F239F483D0670AB19E369160184
-:108F0000433F08DF85F89C44E5D5BC3C5848F294C3
-:108F1000F55AD0EEACEF32077BA3F67F86A2F3764C
-:108F200041C795CD5692BBDBC5BC7BEF7ED6857421
-:108F3000FCF8E7C75EC0FD92BAFDA0ADF541D6854D
-:108F4000C04B3DE2C145F320FBA21EE7ED8AE0A144
-:108F50009FFFC57AAC677C9E72DEF59AC0832C17A2
-:108F6000DF3F2CF8661D13783B3086AF3FB1DE70D3
-:108F70003DA35C95F30B24F1EF259F1E2EE67A614D
-:108F80008F78AE03BEF01412FFF82C524E40D1C7BA
-:108F9000FB7651FC47D24B8EFBB5883EF12526452A
-:108FA000E8D86B62B59D83C44DBA04FEDE6E1B9695
-:108FB000D30578FB08FC2CB4A7905FB5A8FE24DF8E
-:108FC000C8FE663EBDE04A9C2FB41FC6F665BF6F63
-:108FD00005E3356CE72DC6D707F227CA4FB92E67D0
-:108FE000B62CBBB2C885F53E768E423B46C8B3D799
-:108FF0008ADDF4BD0FED05F8DED7A550FCF96DE173
-:10900000D7BFDDF62BD7CA283CBD2AC62DF90C7F69
-:10901000302E25C7DB9DC4E3B9B1E39672488E7B41
-:10902000E696EBAEC4F772FC925F257F4A3C4A3E5F
-:109030006577A5925D13CBAFC46B52AFAA06794F8B
-:10904000FAF1F2AC4F2D01C7C0F7B1B0B487DEC55D
-:10905000380DCA8F27D510C98FD6F4E379517A1EFF
-:109060007E1CD17AA779C3E5EE4ADC7FDDAB78D0F0
-:10907000E489D22FF76A51FA45DA0525252309EF4D
-:10908000F529BE0F908EEB4EF5CC76E9113B74DAE4
-:1090900067613501E3520772BDD1FA74DDE9E3C4BB
-:1090A000FF75AC6733FA512BEEFEC3BCC9C8E74F5E
-:1090B0009A697F6645DB2C0BDAF5373F7E6329F230
-:1090C000D13BEDA348AE7FF0D8A462E22BE64EBBC5
-:1090D00016F87FD5630F5EBB14DEAFEA523D24DF86
-:1090E000A11D5CB72B6E2F66C837EFDA7BE795A31F
-:1090F000FD7E87EA46FB7DEAE393EEC2FA539D23A9
-:1091000012711EBEC79209F66909A41FA4DDFB9661
-:1091100090932D66CE1739257C1DA59670B9915A6E
-:10912000C2F966664B4B3EEEA7F7ED02F98CFBCA1F
-:1091300016BD338CFD3D378CFC8B7A7087D281EE67
-:10914000A7146E97D55A982DC34BEF6D19F0FE45B5
-:1091500073CFEDA8475EBCDD59D48C0350CF97AEDA
-:10916000E4F634DF3F4CE6FD4BBCC9716497707E7A
-:109170008F6D4F7EDF8D7E04CA5331FE0F5A9FBC28
-:1091800016F5E0077B4627E1BCDF7FCEDE8EF6D406
-:10919000FB662E1765FB60E7BD176DA7815D6780D5
-:1091A000C18E33C0C0BFEF19EDC24D34AE8925600A
-:1091B000C78D63FD769CE4F79A0DA313A2F30862B2
-:1091C000ED779617BB6F3339810D226FE4F374137B
-:1091D000200A18F52CEE1142BFD5F15F3CD383F67F
-:1091E000FE36ABDB0AF37C0FF91FF7A59E5543B89B
-:1091F0000F83B639AE87F7F61585D08F5CFD6660B4
-:1092000036B67FFC812D94677013D897C39428BB22
-:10921000F9A107AE45F63FE3096CCE80EFCEECE155
-:10922000791150EC88B1975FC8D0FF757BF952ED8A
-:1092300064196FA82911F6B2877910CF12BFD26FC7
-:109240003A0C7C50E68DE0EB6F4DB564279F6E0ABB
-:10925000D0F313E5EDFBA722FF3A133CBBE1B3DFEC
-:10926000763DA866229D0F149D47BFB7DC91E0C6EE
-:1092700075FBB7A68DB4F978BAA9819E92CE32DE7D
-:1092800036EDC011FAEE6F5DC507A7C277871C09DE
-:109290005CFE0FD8EFE1F48CCD03B975C3E461F83F
-:1092A0005ECEEBC33B385DE5B83FDC73A30BE775DF
-:1092B000E427C907A7203DE313DC68EFAD11F91FD0
-:1092C000273BB83D7DCA96F0C45CCC1BD9B1288D34
-:1092D000819CBDE9C8B7AEC5F7AB9F53DCE8077802
-:1092E0009E5BE042FFF4BFB45E971B9FF05D18C722
-:1092F000A385549447E57318ED47958735A6E7D2C3
-:10930000562FF1CB94D35A08F3463EC27D2A8C8760
-:109310009C8FA3780813FB4F37FD9AC751FAFD5B6A
-:10932000E1DF4D15F3EE2A4992FB0AF47E66197FC0
-:10933000FFFE8E67E6637B1F3C6676E3B8FFF69818
-:1093400099DA5F0B7E9909C67B6A0FF777D6762A82
-:10935000E4277FB007F435CCAB6E83D9674918C8D2
-:109360008733A1BCD711E1C3B5BE10F13713FC6838
-:1093700083FF2E8C1CC88F89AC7333E2E35FE5CB8F
-:109380005FC4ACFB7E7E1C8A0F04BE701D233F4A67
-:109390007AAFEDE0FBEA499D4595C85792FE524EE3
-:1093A00004AB5801EAD5160B2BC03C9CA029CE83F8
-:1093B000EB7B8143372B80874529BDD5284E33274A
-:1093C0007139ADCE34F94CA85F5AAC240762E5C8B8
-:1093D000EF845C9F8F3C0DFFDE2DE1768499359004
-:1093E0001F229FA077B2517F2F884FFABB0E55FEE8
-:1093F000FD40ED520DC6BF606AD2EDA33C8CBD7935
-:1094000060FD520DF8774171D2B323017EABA48E7B
-:10941000C313932699016E6EAE5F5A0DF5FF59E2A4
-:109420007BBD24AA1FD92EBCFF8F1280378D0B9CC9
-:10943000C067BDC54172FA13A56FC2C6DC48FDD72F
-:1094400014F6D66F9508DC6B663968DFBD5B22C702
-:109450003FF8336F92EFED9241DEAF64AC0DE32A3B
-:109460002B83BF3BA1703FCC6F037A5D2DF86AA5BB
-:10947000CD11267FBEDD7CBA9FDEC8479E040DE974
-:109480003A5FF0D1D55AF8087E3F96B5BA4FDAC8A0
-:1094900084DA71217968F90D0B8F9D94ED01BF7C01
-:1094A0006286F9025F2BC09E1B61C92880E41A9076
-:1094B0005FCAC1DFFD03DB6D09B25E3BD1A1C68D82
-:1094C0007CA6B080E9023CEBE25D13306E52179F40
-:1094D0001342BE6F7CF6E3E3C85E374BFB25504674
-:1094E000FC7E9B9BCF8705CA891F6F17FCF87E13F4
-:1094F0006BC883A577754F8F4B87419F9E1FCEC743
-:10950000F5FE694E206E12FAF93B5AB21A817F3E7F
-:10951000DE6FF5CC85FAA742CF501C6E9DB047D9BF
-:1095200063A962DDABE11950AF3B77EC6ED42F2914
-:1095300093385F9DCE0DE7DC89722397FB3F508FF8
-:10954000F2DCE66CBA3C15EB9DDEB725EF26A09F5A
-:1095500055634167123D990BE67D05B45D06B01970
-:109560006095F67343442FACE7427DAFDF98CEE3BE
-:10957000EDCC8F7245D24BD261007D600868AF9A06
-:109580006CCC8CE31FCB76B8517F483ABD6F033C5F
-:1095900062FCCC067884F53D0B830E25884F1E6F48
-:1095A00069547A5B9311FEB942797303F5E0E316CF
-:1095B0004479ED8E1B49FE48B9A3C37F83C99DAF93
-:1095C0001D37DA317350B9336D92D08345ACE80260
-:1095D000371089BE6BC4B7B3D41A5DC371A7DA3C28
-:1095E000184F6B7C6414E91BD6FA07165D8FED48A3
-:1095F000267ED99CAB12DE6FEE5228BF715E5726D5
-:10960000D3A1686E57323D5DE732E8FD074FBC5489
-:10961000C2E512A7CBBC9F0DABA2BCA29F8DA1A798
-:109620001C47A3E0BB596A616718ED08078C03E08B
-:10963000C617B9DE6ABC46A5B82643119D86C4E4A8
-:109640003F7E473BC57FFCACDFBE572E509C564F3C
-:1096500040BAF8BB5586FC03DE4690E3D9D68C7839
-:10966000B6A69B983E88FD611574B2EB714C8FF2E3
-:109670003BB4E0D8EF57603CF65B664F08CA5BEC42
-:10968000AEDDB89E58D0D783FEC262F15D8F9DF3E8
-:10969000477C4192E1FB2DAED9DDC86F8B7D5CEF3D
-:1096A000383DC30DFD5BD57566643216E0F6A2E465
-:1096B00007E24BE8F76ABF42FAF59AC5501ED5AEED
-:1096C000B9E25392E3E60AA39D69F51BEB7D6F9225
-:1096D000D03B63D9D868FA47F0EEF0A19D7EC6E78B
-:1096E000243E06EDFEE30A80AFED36339CAF358EA7
-:1096F000CFEB0C620AE3A23E3584F1922D88077805
-:109700009F5066C467A2CF88BFE439467CA4FA8D17
-:10971000F31FB678A4A13C237099A13CB3D66B800B
-:10972000B31BCA0DF5476CAC32C0B9C12B0DF54760
-:10973000B52F34C0A3B72D35D41FD3B1D2503E3688
-:10974000B4D6503E6E4FA3011EDFF95D43FD895D27
-:109750009B0CE545E17B0CE5C5DD3F30C0937A1EEF
-:1097600036D49F7C62B7A17C4AEF5386F2A9A7F654
-:109770001BE0697DBF31D49F71EEA801AE642F1943
-:10978000EACFB4FDC100CF72FFD950FFF2F4770DDC
-:10979000E557E81F19CAAF2A386BE4D7382EFFE621
-:1097A00079FE69F84EC90ABC3C096D04F5B4867CA3
-:1097B000DBB24C61C9184FEF5E644339F08A9443C1
-:1097C000820F9F47FD8CF5F3580ECAB3596A4518AE
-:1097D000D7ED992E85D67FACBED33EF2FB309EC727
-:1097E0007EA57830CE96006A4B8BEA3FD16703475F
-:1097F000320227CF711BE0547FBAA1FEB0C5BAA1D7
-:109800003C23506028CFACF518E0EC863243FD11C4
-:109810001B7D06383738C7507F54BBDF008FDEB65C
-:10982000D8507F4C47C0503E36546B281FB7A7C155
-:10983000008FEFDC68A83FB12B68282F0AB71BCA3E
-:109840008BBBB719E0493D1D86FA934F840CE55355
-:109850007AF718CAA79EEA34C0D3FABA0CF5679C07
-:109860000B1BE04AF6A2A1FE4CDB6B067896FB0DC3
-:1098700043FDCBD3DF36945FA17F602897F6CD55AB
-:10988000059F1ADF0B7B679EE71F86EF83553E8699
-:10989000FC11DCAF785A74C60A4B47927D0172BD49
-:1098A000D7AEA27DE4A7B851122608025F26801029
-:1098B00043BE4257A186E24F2914F725D5A463BEC3
-:1098C0000FD8090024997273D19E8E8FD86D5917C5
-:1098D0008A2FDD6E2B2F65C4E73797062696A6A242
-:1098E000BFB26F36DAED37B3E0661C07E8BD845EC1
-:1098F0005C1F76633C433EAFB0015EA2FA7BD1BEF3
-:109900002DCB7B11BFFF0ADB69AADFDFAE8873288E
-:1099100030BFC6A8F6EF07BF4203BB6E5B13AC1B9C
-:1099200070187FD0E426F8A1A674827FD4A4D3B3A4
-:10993000A3A9809E0F3779A87C475319C13B9B7C14
-:1099400004879AE6D07377939FDE3FD6B498E027DA
-:10995000C08FC6E71EF0ABF1F914F8C758BE17FC6C
-:1099600065847FD114A46767533BBDDFDFB48DE00E
-:10997000034D1D04FFB22944CFAEA63DF4FC4D5368
-:1099800027951F6CEA22F8505398E0705337C1476F
-:109990009B7A083EDE7482E0179A7AE9D9DD748AF0
-:1099A0009EBF6FEAA3F2979BCE11FCA188D7AE2988
-:1099B000E5F12289170933564DFC20EDC3F968E71C
-:1099C00023739499FF66B0F363ECED587AC87ECCAC
-:1099D00055181384E7F0FCDD2D517ED6ADA2BF2DC6
-:1099E000712C68077E6F3671BFB63989519E351369
-:1099F000F6EB1AC1972C85DBADABC5B8D688F53030
-:109A000009F9B380F8F3E5AFE35748BFF14C61A023
-:109A100085F833DB1424FFD911CA47FB39757C6004
-:109A200073E924DC6FBCE905EACFEDA17DC779D6E7
-:109A300070EA75181F7951A578DE50FDD58BFCF1C1
-:109A400021CB0F7D9085F6F69C2FD500E2E915B36A
-:109A50007331C60BB69772FF747BA9C9F0FCC9F8C5
-:109A600040078EE77367C30D2618FFE7D3373C71B5
-:109A70006B6EC49FBE1A5D52F0831630DD4CF989BF
-:109A8000CCF77C2E34750D1858085FC782F4CC2AA9
-:109A90000CECC2F92E01431CE140B93567B079C521
-:109AA0008E6BAF18D75E311EF97C717CE0696CEF6C
-:109AB00073A78FC6F5CA94CBF3715E725C71137491
-:109AC000719EA16F278EEFF3E73E3DA98C8AE05F80
-:109AD000FAED9B2B455EC90685C7E5A4BD26F2526B
-:109AE000A4DF5173BB12427B7D19F83BB8BFF4A6CB
-:109AF000B03FDFB473FD7CA6C15C80767D8D12E73C
-:109B0000C17DB8330DFFE540771AEA33DC2769C120
-:109B10009C03286FB943A17CEE1A68C704EDD4609A
-:109B20002010BFBB4B21FEFB627C2E8DAF06CC3FCD
-:109B3000F2B352FA7270BF14F8E545A4C3DA296A89
-:109B4000D002F6F02BA650BE42FBD237591418E7CC
-:109B50009A14E0939143F3C37A71FE40BE073EFB33
-:109B600003B6F7B75F4F2EA038FEA1293AE2ADC584
-:109B7000C4CF23057FAF7A78BE0B17D5EAD4F11492
-:109B8000A7649AC78371A679E2FCCA11956DDC3788
-:109B9000881CFDBBA0DB2BE9E639216AD7B85FF34F
-:109BA000B1A0E3C7A2DEBCA32F66E3F9ABF5DD6687
-:109BB000B24758496FA1DF39C87C366EFD765E1416
-:109BC0007FD777BDCDF335586F61747EBA6B326F36
-:109BD00057F2936A71067639A2C7D7CFDF9F117FFC
-:109BE00027027F8F22FE3E89F6F67CAB9E701D3CDD
-:109BF0007B01456178067EEAA67C239977B48AF9D1
-:109C0000E9B906D801F9D91F7CC082F85FCB3AE9DF
-:109C1000FDFAB21B7310AE677DD5E9E84FB4373F4C
-:109C20009F0EA35CB4ED8159189F5D185AF13C3E1C
-:109C3000173CA69C44FF15D6877932C64F9486B64A
-:109C4000E1D0DFD2BD956D99F07EBECAE9C15EE27A
-:109C5000F400BEF1A94903E709EBC13999E6E1A394
-:109C600079A8AE3986F550B389F9949448FE7CFF03
-:109C7000FA28BBE5AF99E80F697DB4FF5E7FC89A0B
-:109C800084745ECBB8FE8EC43FA4DE66C4E7B7B072
-:109C9000380FD6FB50F0F587D98CF8FA43051C3CF9
-:109CA0006FC49E64398174EFA888FEFDD0142A75B4
-:109CB0008D22FD9C87F37D217D918E71B35B526C6B
-:109CC0001E15CB1343397C1FB55FCEB30BF191B892
-:109CD000D7FD661E878A1D9752F6C23FD07EB05AC6
-:109CE0005810F737607DB3525CD7C32DB4AE5A100D
-:109CF000B5183FABF2EB83B5DF2ADAEDFE82FBC18C
-:109D000041980F9E971CD08F5BF413C7FB917A0488
-:109D1000FB233992C60CFDCDC22417A0CB2B4E1FBE
-:109D20008DBFD9944872E7E311816AA4978CFF48EC
-:109D3000FFB03BF7FD3CF2E3CFB764A19D0EFCCB37
-:109D4000F312A773F9F48A590F22FC4A652EC5FF56
-:109D5000A5DCBDBA8CC7CBAE96F1B18A98F8584C49
-:109D60005C86550C1E2F63CC63C67EC7B237257E3A
-:109D7000281E73B44223BA0781EE186F3E2AFCD422
-:109D8000CA78EE9F774E4E267E4ABA226FD07D1556
-:109D9000F9BC47C457EF053B8845C5D5EF2969B4E1
-:109DA000619EC1964285F6BBEEAB8AAB8DCE73DF6A
-:109DB0003BCDCCF753A757EE44BC153A4255A4AE61
-:109DC0007D9A8EF350C4BCC6B901EF266CDA2FE23F
-:109DD000A41E1B8F4B5593BE96F4BE547DFD941666
-:109DE000DA1487F34E61B4FE9C1D7692A36AA72F06
-:109DF0008C29D75F4E5B7827D151F317603F474AD4
-:109E0000E39803EA7F7EC442FEFD21D3CA9F623EEF
-:109E10007CDF1B5686FB9E9DCE4C0DF545E71797C4
-:109E200055D3D3397536E371CE7813088822377B42
-:109E3000F4DF9058E2DC59A7C2BA19C5DB7CF126E1
-:109E4000F0C13A4DECEC0C18D77E87F7C189C4728B
-:109E50007E15E7D95511B81FD753296B20F83E8BD3
-:109E6000BF7617F47B5F928DF8C45FE17F808F939C
-:109E7000B5CD85F14D9FA9303CC7DB6601B95C8843
-:109E8000719238BE27C5B87DEF3F974FFDEF98CC54
-:109E9000F7F95AD37D3D78606448BCB9B5BEFEB8C9
-:109EA00008F15B16C5F3241EA3E9E52E35D02B601F
-:109EB0008EA65719D06B7C34BD7CCAD7A1D7ED983C
-:109EC0005C3669207F06ABF407AA4BB85EC314B9B1
-:109ED0004A6B7621DAEB47E2320BA3F7F5245F4AAF
-:109EE0003E1D843F371C43F990A5B9317E6A9D170A
-:109EF00047FB2D925F259FFE754A3FBF7ACBE1B9A4
-:109F0000CCE19F853224965F311E16CD973543F202
-:109F10002F7347AFD7F9603F2424A1DD73EAB1CE98
-:109F200028BEAC69F854E3F2E3C28CB8D248FC6EA8
-:109F30007E85C2DE89A62FFC7BA740CC8FEC1E8DD0
-:109F4000FC2D89C74BC5B7F95BCD0568C76DC6F356
-:109F50008980AF76C5E31B8671AD86B76FC5F76D97
-:109F6000E27C70B0D0C2ED2BB14E647B5F4EAB7A19
-:109F700007F9D639F974FC6AA8F7799A4947E4B425
-:109F8000E92BFF8DD6DD897886DFB9927B6A1FA524
-:109F9000753486E1FEE0E7370746E07EFDDD40A749
-:109FA0007728993A34CC447B59BDC3701D0172D3D4
-:109FB000F93390CEDF33511E22F83B53460ABFC31C
-:109FC00027EAF752FDBB2DDB6C71D84FAECDBD3B00
-:109FD0008ADF6788F83A1E23E7FB672D3ADA657A4D
-:109FE00019D7BF0F36ED99F6DE681C4FE7B4F7605E
-:109FF0003CC973432C007C1C5710D43105C4F6E5D2
-:10A000004C05CF2FB0CB5827F20DBE6F1E1F69DF56
-:10A010005CC6D7990DED15A09F6D53504F8A927F66
-:10A02000369312182CDFE58E291AFF6E13A372DB0C
-:10A03000D1ED749E3F39CFA360DEB36DD33686FB7E
-:10A0400031F6307F9F92E7535645B59B3217C61DB8
-:10A05000C517F3F12401C81BDB6E60CC12A4431CAE
-:10A06000C51F63FB9D9F5AD5ADB986E693587E63A5
-:10A0700082DF24DFC879D2C994A873F9D523B93D0A
-:10A08000DCB6D1B20BEDEDF2B244C2EF672955094F
-:10A09000EC227A6527F041D08AFEB18D9EBBC1BF0C
-:10A0A0000E8E41FF389DE027C0BFC6E71EF0AFF11E
-:10A0B000F914F8D758BE17FC6B847F01FE35C29D9A
-:10A0C000E05F23BC1FFC6B840F807F8DF02FC1BF2E
-:10A0D000C66717F8D7F8FC0DF8D7587E10FC6B84CC
-:10A0E0006758813F703E05C1F48540D7F63B2C3E52
-:10A0F000CC17DC20E87ACC3732D903F4B71798288C
-:10A10000F66D7FF9070CE7634F37D1F9AFCDE93F23
-:10A110006037A2DF5AEA24BBA9EDE7DC1EB16B0F62
-:10A1200032943B3B95602DF330B6B86C6C0DEEF37A
-:10A13000E5A56FA84A02F886B2893B6CB03EF2F5FD
-:10A14000058B9BA360DDE95DBBCF1D814714EED27B
-:10A15000C03361377615EDC0A33F380ECC13AE2B5C
-:10A160002BA96906160A8F646457F4E55A283F67DD
-:10A1700015D26B348E9FC70DAF622DE9B86F39428F
-:10A1800007EF47A1FA619672E9F53794E9F43EF6D4
-:10A19000BB8BD533955C523DA65EA43D2C572ED289
-:10A1A0008E4D5964EB81B16F350B3995EA2039D565
-:10A1B0008E711CC07BBB9D3FBBA7F0B8C1AE2955BB
-:10A1C000DE29F0F44EE1746DB707DD55D8FF781342
-:10A1D000E52DB08DB97F1809FD7DFBF71AC3BC4F83
-:10A1E000C99FED820F468F70D2F97B76A78DF6ED71
-:10A1F0002F1FF1F3D62480473FEAF1607EC356E675
-:10A2000089433E09DE6BA2FCC6A74B46252D80EA9A
-:10A21000E3263D9B8472FDA49037219117D4DCB6D0
-:10A220007A04EAB1CF5FE3F2F0C7423EED32F73491
-:10A23000103D2739C8EE606C1BD917CDE9406CD0B2
-:10A2400091A60CFEB498DD4BB19E050C01CCBFB6B7
-:10A250007C31D9867E5DCB39EB1C9E1FDB43768734
-:10A26000C51E7027C2FB6D4113C98516DD41F96C0F
-:10A270005B1DDE6E3CCF1C749B28EF756BA189F0D3
-:10A28000D8EAB83684F6BCA634D7A21E0BB9F7DBE1
-:10A2900072E17DA8D044798C21DFC2390807031A06
-:10A2A000E559D10F960792E81CF756D6F7D2442C01
-:10A2B000AFE176575BDA7F1F8DC738F7356E0FDF5A
-:10A2C00056613AE681514A9809FDEBDE4DF1388E30
-:10A2D000254CF8AD41F2535D564EBFEF1FB9C23D5C
-:10A2E00092EC8AA8FD2B2BC6E43C360F944F707875
-:10A2F000E7A01FA939BD36CCEF6B757B6D2B68FECF
-:10A300003C2F8DF22FA0DD16B789FC592CBFB190E0
-:10A31000D4E1F1BC529172AFE3BC7F7004F1A1DDD6
-:10A32000C458AE8EE3D382D1FB83B65115DD3ACC4F
-:10A33000A37D7512CD43533C04B39B341AF7703D93
-:10A340008ECE2F3F6899D78DF6E170DB2DB48F95B7
-:10A3500051AB19F69986058C70EA62239CCCB4C87F
-:10A360003E15F4FBAEE09B58BCC5E223C3DDFA1AF0
-:10A370008E3F2340876B078C7FBBFBA1C44A86E3DB
-:10A3800074D038D31C2B2BD17E4A65FE66E4BF7F88
-:10A39000759C13DC0B6DB9D0FF84141399471359C6
-:10A3A000DF266C77ABE0F7F65C4ECFC8BA5239BF08
-:10A3B0004FA9CA9C928AFB042670CC22EDE706C105
-:10A3C0004133EC132419E0D1DB861BEA8FE91869CD
-:10A3D000281F1BBACC503E6E8FD7008FEF2C37D47E
-:10A3E0009FD85565808BC2571AEA17772F34C093D0
-:10A3F0007A961AEA4F3EB1D2503EA577ADA17CEADB
-:10A40000A946033CADEFBB86FAD29E8FD58FA953E8
-:10A41000BE991D6F4D1F6EB8C726D64F88B5F36D18
-:10A420005FB6E89B909F5D16E2670DF539EE2BDF76
-:10A43000C1FD21DB748F8EF2255EC8D357A6FB4683
-:10A4400022DD2A5D36D20B9A83D7D31CB3C95EC9ED
-:10A45000E9B0D0FD3A9A9BF597C7A37C6E0A4ECB24
-:10A460001B1D19B7DDBD8DEEA9A874CD61987724A9
-:10A47000BFD7DC3E1670627F3AB793DC41AA67D73C
-:10A48000E1FBA8791C32999803E538F86D181F197B
-:10A49000CA4F93FE99F4CB86F2C7A41F96636271EC
-:10A4A000F8DCA5F4DE8A7E7A61C36B55C318F96BBC
-:10A4B000D5A847EEC3F3D9E8A74DE076565BDA9509
-:10A4C0003AC66DDA733BBB47E278524D141705BBB1
-:10A4D000D9B330CA5E5C2FE8A98D6CEF45FDD798E3
-:10A4E00068D3D15ED26CBBA6BD07F8DA69EE7D12E7
-:10A4F000E310AD8A7B5D27CAC53B1C94EFF1A0C079
-:10A500009BEE34156F82763B9B7D1A9EC3EFBC9BFE
-:10A51000795A717DA4546E4A84F7A3B3569830DCFF
-:10A520003326AF79133E03C25E1E5BB8CB940CE5B5
-:10A53000E34A2A17637C4B75437F178937ABAE0E0E
-:10A5400086F36179DA49E42BB4EE2FC0D02B936CFB
-:10A55000B4FF68477A2BF4243CD8CF39427684F391
-:10A56000385EEC3E2514AF70BB15F3E52A933A88AC
-:10A57000BED29E453B17DBF75704D6231FA5CC352B
-:10A58000D255B33D46F8D86AE2EBA23D517F19F5AA
-:10A59000737B6E5E12EE5BF5CB112157EE10FA5312
-:10A5A000BE9772E523F41D5223F60DF07907C6D944
-:10A5B000ECDA363A7F69BF6B1B43BEB6E36975B20E
-:10A5C000F783BA9FF487DF906F563D72B10DF5F5B2
-:10A5D000D9142FD9B3F68DBFA4F1C5E2CDDECBF3EC
-:10A5E000CE86C2AB2BFF61D2EF2080753CB77334AF
-:10A5F000CD511B1DDF94CF6421F7CD323F083C09BC
-:10A60000D4676765FE912F9E8F2F91C3C7F297D2B3
-:10A61000F86E4DF50EBB98BD6D077F331045F7BB47
-:10A6200035BF0DF1D0767EC11C9AB7468B816DFD8A
-:10A63000A27017C58D85BF942CF0AB233E018F39D6
-:10A64000167E5EC0933297EE2D93718FE7A724514B
-:10A65000B927C8541EAFEBCF4F375D984863D52D4F
-:10A6600052EF9229CBF514FC7F04F35246B56BC62A
-:10A670007C76A1C7A59E1EBDCD583EA6C3088F0DF2
-:10A680000DF8FEDF51CF5FC37F073D602C7F58E898
-:10A69000EB6B505FE3BED5B7785E880D467481EBF7
-:10A6A000D988DE033990DD19AE44B199759B66C82F
-:10A6B00027191EA30FFD153AE1CBDFAD9951CFCA83
-:10A6C000B84CAC1C56EE3CBD01D74B657CBC8EF241
-:10A6D00013E318012BF7CB03E0A7DCA779FE548323
-:10A6E0007E55B74AF952924EB1749D5A2EED5CFFD9
-:10A6F0001FA7907FDC5B8CFE3AF61788EA4FC6579F
-:10A700000E4D0FBC89F5649CE5CC1CED79458FC4DA
-:10A7100051645CC03B85AF9FAD9ED71B8EC1388E08
-:10A720009DB0520C6496FA727713E643656B24BFB2
-:10A73000DC93D7FD14FDEFAA3F4339CCE398AE0F6D
-:10A7400023BBBCDB4C71802AC1C755C2DF92F19696
-:10A75000CF843EE99B22ED9C601CF7EBC37168BF80
-:10A760008EDB03B2D748CF785ECEE36AE33B63CBA0
-:10A770007D94A77499E017CC2FAB4CC3B42E0E7701
-:10A780003225D90D749CB8B8F728BA0E852F3E1F14
-:10A79000877CB8CFCEEDB5A7043FA431C58379F847
-:10A7A000697B1C9E10D473AA6C5F0FCCC3735C339F
-:10A7B000E4934D3868840B59149C8BE330C2F7EA5C
-:10A7C0000DB8C5CCEEAD019B1CA6EC28177947F956
-:10A7D0002C1FF96B96EA2842FFA9B1D2C110AFD65F
-:10A7E000B7C7FCB807E5C56BFC7E2A77BCFE4035D1
-:10A7F0007CEF7E29D9D3AC47E8FF14F8D1A81F7E9F
-:10A8000074C1C35ACD51712DA0671EED23BBA9BCE5
-:10A8100013E88AF07EF0ABF3681FB980DEFF12FC0C
-:10A820006A84BBC0AFC6E76FC0AFC6F707C1AF460B
-:10A83000D837BD722CC6C3DE847AC8177145076C41
-:10A84000A3309EED50E97C4D2C3F6E6978D7711D89
-:10A85000C8AAA91DD97353911F6E53E91CF2D8DF02
-:10A8600064CF45BF353AAE161D578CC4D57A15193D
-:10A8700057B3027D5E98ACF3BC45195F0BF0F8DA74
-:10A8800057B7E393ED50BC72403BFD714B5BF0BD9D
-:10A89000023C9AA5B00478FFF11DFFF904EA99D4AF
-:10A8A0008CC0549C77DDA4772CDCEEE6E7A6B2C41E
-:10A8B0003ADA61E779A35922DF27365E397DE6DB94
-:10A8C000B7A602CAE6978F5986FEFFF45BDE2ECE4E
-:10A8D00001F887E53F588679BDD37FF6F633998036
-:10A8E000A77FFE66112F7FF0EDB3591ECCBBF8DEBB
-:10A8F00032CCF3752573FDB6439C3F92F8BD5EAC38
-:10A90000F7FA8D8F921E073B83213E5AD2FCA45F3B
-:10A910003F49E973AD80FAF5A97D692B2FA20FEAB3
-:10A92000373E41DFEF503CA74238EE29369E5F2A82
-:10A93000F4CD19C1BB52DF34DA3928C7C3583ABD48
-:10A940007F50C481982F93BE4BB673F898AB9CF49C
-:10A95000D2FD55FAAB3ADF9F24FFF898EBB2EF63D4
-:10A96000FE5CCB1C8DF60D1F7478EDA8B7368B7985
-:10A9700041FB41CA539965A3FD1C96B298D67592C6
-:10A98000EC27A586F20E92C4788E97C785313ED00B
-:10A99000526DDB8D72F4078E91D45E4B99258871D0
-:10A9A00019096F2A87F1003E135D49B9D49F90734E
-:10A9B000326ECC70F70CDAAD12D3AE92F90C36F3DE
-:10A9C000E968FBDAC17A887F3C265D45FB3079AACD
-:10A9D0004EF2AB987916E37B8BD2104466C479981B
-:10A9E000A2E7A1571BE7A1CF32CC4369B485D12E92
-:10A9F0006C9905F380FAC79DA534DE58BAC9F97C75
-:10AA0000B79CF373EC3C99D83792E704AADC15079E
-:10AA1000705CB34CBE561CD7F3FFA849C10B23672B
-:10AA2000B3060DDF8F8AE4EDB47E9DBC88E9EF2A82
-:10AA30007C9FEB160BCD6FE7348E87872DA15C3A98
-:10AA4000C0A18532707F77283EEE2AE7723FC2C7E9
-:10AA50003E86EBAB25C9C7F9D8DDE76A463E4EEC2A
-:10AA60004BDB44F30A0F4A9F587E8EA5D731BC13A7
-:10AA700081F4625045FC7F157D255D63F7BD24BFE1
-:10AA8000244F754B7AA7D33CC33986FD4068411FDC
-:10AA90006C1F7C33B4A747ED9F59D2FD64679B536D
-:10AAA0003C05186F6EF9521DF47CE45981A7665776
-:10AAB0001CD9DF2D2E6E7F1F715D69F09BAAC18F9F
-:10AAC000C2FD62359975E2BA521396521C4D1D862D
-:10AAD0009617B185D1AE4D98CBED5AB7F7A2E7A442
-:10AAE000B45ED5707FDA00BB36E94A6ED7BA2C6403
-:10AAF000D7EE705A16EF1A44EEBC54CEFD9F2338A1
-:10AB00008F41FC46F017299E29FD458B3B407E9FD7
-:10AB10009CE74B82DF657DABBB81617C4DB5787472
-:10AB2000B46355718E15F3970BA2EC02D9FF0BE5B8
-:10AB3000FC1CFE33D339FD641EFBF4579586C1F02F
-:10AB4000AE4D9576C9E07CF72FF00DC909AFC3E291
-:10AB500043BBC3EB48A77CEFA1BEC3ADEA53491189
-:10AB600039E3F9B254257DA479287FBFD3DCFBCC2F
-:10AB7000ABE80F3EEF20BD23ED71305629FF18FCE6
-:10AB80005E9F071AD9F74F5889A688BF0BFE57F664
-:10AB9000D4A8FDC7A38D2769FF27D64E8D8D27F436
-:10ABA000AF73D713B97C1CA10C5CB74A63D930E4EE
-:10ABB000A7D8752E9FD9E9C597AD8271656714D165
-:10ABC00053BE7F84A97306BB1FADA41FFF5C3F8FDC
-:10ABD00085CE1254D2CB2553818E1FDFF67A9A4749
-:10ABE000C773B49F927E3ED35096B005F9BC2089BE
-:10ABF000E46A96381F26C79375F391C42407E6E9E3
-:10AC0000F58DC5FCB65093FFB26A33F917BEC1C6C5
-:10AC10001B98CAF5110B8F60D1F7FFE8293D578CBF
-:10AC2000017CEB0E9347A775E526BD27D77FA59638
-:10AC300058ED06FECE6E621E878E5723BB291E96E8
-:10AC40007D41253ECB3EC6EF6F1E91D2A7E0BD5B96
-:10AC5000FDFD883C26B9AFF2594335ADCBEC618C94
-:10AC6000F550DCD24FFB0F9FA58417E0BAFEEC2114
-:10AC70003EA2EC478DE5A06B295EBDFAB6B8900EFA
-:10AC80004D8FB80BC687E3F9A9C2B272711CC772A7
-:10AC9000B760BCE757F114EF513BF2285EB32623AF
-:10ACA0003007F9E1E390FE6DD3283159A857F79D9D
-:10ACB00038BA2F6087D27305E54BDC6E628F0F12B6
-:10ACC0008F5A3395FB89B582CFB3D34B39BDD34B64
-:10ACD0002E5B957CE9EBE887425E6F4D08D1FE9CC8
-:10ACE000CCFBBAD73C385FBD3ED524E89463C8039B
-:10ACF000B3A1F703FCA22AC2DEDBF3D4534FA53184
-:10AD00007E847024DF878CDE2F8ECB0B51619CC735
-:10AD100047724771FBB87C7537A40781BFB77CA128
-:10AD20000EDAFFA3827ECDD9DF4EC7FAD5BA879E51
-:10AD300047B24B4FAC00FC391C16668D92BF924F48
-:10AD400062F57BA373E445FD770BC861FD22F10535
-:10AD50008BC8EFDA7C748A0DEF07DDECF0F6A0DD2E
-:10AD6000B5D991E2A5F8BB03E445543CCAE178812A
-:10AD7000F8D0E1E1713A07CA5D8C47E1FC0B71FC48
-:10AD80002FD0FC65BD26217F1C9E30ED93DA3DDB84
-:10AD9000A89E4DF3D3F9385B0AA3BC059B9BDF2B20
-:10ADA0001A976762B641E4F0C6A9DCFFDB5CE8ED08
-:10ADB000A9A2F169786C8A6D4EF7A6931E443CC334
-:10ADC000F7C79CA509D1F87956C88396237C7EFEE7
-:10ADD0008D19EEEA62F467FD7B511E6C76ACB4E12E
-:10ADE0007D5DAAB3E4A2ED1C12F48AB4B33DAD3A82
-:10ADF00099DA7916F95F757ADDD88E59DC8F3A4089
-:10AE00008F89717CD3381A6090F274082F4498B0FF
-:10AE1000812EB14F07C6C39207FB8ECBC55CE1B74D
-:10AE2000805CFC138EBFAEF09D17F81AE3FE4AD289
-:10AE3000153C0FE80C7036DE4B159B67116BBF4855
-:10AE4000BD23F510B4A3623B0FA3FD3226B28E647E
-:10AE50001C27B3D6CFD74B8A9FF805EC191DD78B8B
-:10AE60002AF2F806E8810A8E3FC555A6A3BEA83E81
-:10AE7000DF9B89DF1D729ECAE4F6AB717FF9F83F54
-:10AE80009EB063F967B55517B553E47EF250FBC821
-:10AE9000AEEF7EB821DA4E196A5FF9ABF6938FBA3E
-:10AEA0002C14B7DBA918CFBF0FABE0F22F49CC6F42
-:10AEB000D79480BD2215EBF93DFC40338FCBBC32DB
-:10AEC0003DE0A8C0385ABB850591EFFE519A1E8817
-:10AED0006AE752F12CE3EFC3851D35DCF18482EB88
-:10AEE00074786D48C1F879666DA7E2BB48BDFF1262
-:10AEF000EB59D6378BF667687D2AEAAB196EAE1729
-:10AF000033CF69AC204AEEF44EE5769459D8EDAED5
-:10AF1000A34FDAB1BDA3267F7B3EEA0797497F3C6A
-:10AF20006ABD9B6FF6DAAAA2E6D782FB4283D0D134
-:10AF30005721F56098F4B7D4B766A9275234839E99
-:10AF4000A88FE77C2CED9DFA72EE07D5C7737FFCC6
-:10AF5000C5F4C014C4F327E51FCE1FA5E339D8B04C
-:10AF60003925F7ABF747FAED1B536885F46390FF7B
-:10AF70003BCD7A572FD9592E3A3F21EDAAA29F29CE
-:10AF8000A3B09E47F191FD37096F1A5171AB96DB63
-:10AF90008360675D5991CAAFE48FE6031673AFE033
-:10AFA00050F3F4E27DA6A9180FECA178ED7DE795AA
-:10AFB00041CF41DC5721EDA5FEFD4143DC3553E88F
-:10AFC000BD4C51AE63DC3517F7BB8C71D1E26E23FB
-:10AFD0003CA9C7084F3E1113670DFAFE03CFF96174
-:10AFE0003E0136BA03D61FCA8F55621F342B18AAEA
-:10AFF000C4F3E1D9AC93F61B336B930CF89EAE8A85
-:10B000003C0CBCDE588E137E32B5791FE0F79BFAFC
-:10B01000E7156486BCFEEA55DFC6AB30D9367EBE86
-:10B02000CF069D23BED65CB17016D27B40FCB6C164
-:10B0300018B7CD8C2E073CACDE613C27E8F71591A4
-:10B040007FB0E85BC6F382321F1DE79BE91DD8FF86
-:10B0500057F70BFF9206F62FDB7D18E412C95D71DE
-:10B060008F703616613B5A58C17DEFE10D8CEE139F
-:10B07000CEBC8DF906DB3F3820F0158B67169C415E
-:10B08000F89B29DE0D77F03CD5E1B799C84E1C0E30
-:10B09000F282FECEC03AF03500CE5CA7939D797562
-:10B0A000AD89A1DE60E79B0CDFC37029BE2AE9FEF3
-:10B0B000B083E7E166D7B19009E7D37019AD331AD1
-:10B0C000D7C8083F00BE0CF7095C5D663CA79B1D16
-:10B0D000733E57F24166CCFB6B2ADC867501FAEFB2
-:10B0E0004005C90FAE1747A35E84217D3CE5C4131C
-:10B0F000986F377D13E3F7D924C6F1FB6C22FB135D
-:10B10000EA05E0D7A3B6990568C76C75C799300FF3
-:10B11000E25062EF4F5822F88D152C589D85F71C90
-:10B12000F68D53007EBDA27E67FB3428B7F73D8DB8
-:10B13000C16587E3DB37CCC98EC02ED73D04B3325F
-:10B14000A6E37D4098738AEB2ECE7DE51EBCE73AE0
-:10B15000AED041C1CA3866BC77A7B55CBF17F3480B
-:10B160005A479BC4F9E8A87298C78C696E99FF4644
-:10B17000F9786C0ECF0B886E1FF3B2876CFF4A68AC
-:10B18000BFE46BB46FE3E34FC357A07FD270FC18EA
-:10B1900017C7F691BE18448AEE5FB4A7B1E02EDC63
-:10B1A000CF81FE1C0AEFCF8D792A69CC9897D0DF2A
-:10B1B0009F1BFA1BFFFF603E8B07D2C37C317A2CAA
-:10B1C000FD7AF46835F968BCC1090EF28FF0FE2AE9
-:10B1D000BCA7CE2EFAB38BFBBA10AFADA511BC82C3
-:10B1E0007D48ED42F5E60B02CF987798E6B6109EC3
-:10B1F00087C2DB5137CF93BADB1D176ACEFDFF4004
-:10B20000AF744EAFE8FED0CEBCE4FE96427F2997E5
-:10B21000DE1FE217D74F3F7E81269BD22E1DBF3007
-:10B22000AAE0A5E0F728B46B8AC26B241F69BB1B98
-:10B23000FD05BBD96FC3FCCCB9D312697C85290B42
-:10B240006D949F90BA90F28DDB0A1DF4F705DAF247
-:10B25000BE653347E9E9B6C21A2A87FA94475518FA
-:10B260008EC3F0051BCF7A283E707745753AFA8B6E
-:10B27000C1069E9725F394A43E64623F94E6051FA1
-:10B28000264C3BD07714EADFDD504279680989FF0C
-:10B290004DF9575B6B3D1E2CFF899DEF6BFE48EC13
-:10B2A0006B21A3527C6D42F9A3B8BFEB1DDDA8D082
-:10B2B0007EE6BA8BEF677A3FEDA9C23C2EB682E7F5
-:10B2C00069A5D76831FAD0B86EB7225E793E554885
-:10B2D000E1F835B4B7695A2AE1EDEEBCDD0CFFDECA
-:10B2E000D033D0966A5C5F26CC6B8A5D8F9AC54757
-:10B2F000F78BB146138D2313530540C579C7CF4D46
-:10B300005F01EFB36ED2E81EDF618577517E13587F
-:10B31000FF646F1416BE5C85F08079AE32CE237662
-:10B320005EB1E396F71B4B7A793FF5C4A3DFE51DC9
-:10B33000BD90F2CFE847AE7735663E6027DB534CD1
-:10B34000740F5C5C5ED4BC98A19EF0EBFE67E106D6
-:10B35000D055B48E62F7C9FE0F3F2F64651E9B85E2
-:10B36000BE93E76BF8FEDB705C3B48F71CC6F3C08E
-:10B3700063BF2FE5DFB374BE1F678D63363C5FA3E9
-:10B38000AC8DA3B8A6D50A309EBF11F78C3D2CE238
-:10B3900070CD0AD332BCD1FD85298F5EB55D95870E
-:10B3A000FEC451DB22379D6B13FE9539D14F798C4A
-:10B3B000AC20C9E0A71E15E7D31A6FCE1D8671BD5C
-:10B3C0000428EB417F5BF3D890DE329EE21AD57BF6
-:10B3D0003DEAF1DF3EF7C90D36D4DBE81C9733D6E2
-:10B3E0003DEDC39D78BFB05C9FD673FC9E8E7E58AA
-:10B3F0006BA03C11EBB91CC3FBB0F0CFFAFD961467
-:10B40000AD9AEE9F127E432573B7E27795801CC3F9
-:10B41000BD00E2DE8F81ED6719DE87C1EF8EDE278A
-:10B4200018BAFD78C3FD0256F083066F3F3FA67D34
-:10B43000F7A0ED47DA4D36B4DBA671B9114C890B94
-:10B440000D16F7FB725AD57BB8A487CA63FB629AC4
-:10B45000C8BFB78144C37D29C13F5BD21B28AF4D14
-:10B460008DE3FBA8661023C84FC79CB53C1F23CBB8
-:10B4700098D726EF1569C3FB42A0BCCA61B4D72B8D
-:10B4800059DFB1890AFAAF467B7D3A4A52DCAF6296
-:10B49000B1767C03ED9B9AB38C72A143AC1793B346
-:10B4A000A487F2E0521D94E73054DCE1CD2646F942
-:10B4B00059E6787F03EABCB4E9DA88B632801338FB
-:10B4C0009FE54DCF588E71DE37053FB7811CA0F345
-:10B4D000A38DC376A951EDD658C2A351AFD498F825
-:10B4E000B900FA81FEDF4C1D4EF1D7D87EE5BD31A3
-:10B4F000125ED6A04CCB8B9ADF9B627DF4F7776B04
-:10B50000E62EB46BFBFBB38627517FFD7946A2BFC5
-:10B51000B46FD6DF5FC4FA96FD2DFBB6717ECB2CDF
-:10B520003D34BF65E2BE52D9DF5F707EB9DFA03F18
-:10B53000911FD6DFDF778CF35B66EDA1F92DEBF77A
-:10B540002F457F69DFAC3F99FF60B536D4223F0DB0
-:10B55000950721F31F2677641AF21F5830736E6522
-:10B560001E630F289C2F561D1AFD53E48BB3731BCB
-:10B570003D64A7087F8FCE0BA9745E88F4E8D55987
-:10B58000DC0E91EDEF692A63BE313C4E84CF820A16
-:10B5900085CE238C2D537CB8EFB603E407DE7FB74E
-:10B5A00013D63996879AD2E9B9BB49A7E763E05F1A
-:10B5B000FA282EE621F887D379DCE5810CF792553D
-:10B5C000687F54C6F17CEC8AA960D946FC37582FB5
-:10B5D00047ED98F7782D2BC27368F91D1C9F29D56C
-:10B5E0006974DF7D5CD1F19E2680B794A93AE69913
-:10B5F0006FD1078FF36C9BCEE3BF5B441E6510CF0A
-:10B60000499252017F12E6BF5C908AA973E9FCCD92
-:10B61000D5DF4924FBA6E65BBD4E378CE306A5E8E3
-:10B620003FF2001F7F15F6CDF29C2B491EC4FAA7EE
-:10B6300029A8A94A30BF500D85E0D745CE45E4DFA3
-:10B640002EBA86B124F8FE6AFC0EF4D4ABC23E7A60
-:10B65000A5D7CAD0FF0B56F3FDEC1BEE32FAA50FAF
-:10B66000D8C36EB40B1F284A61488F9ADB8CE55B08
-:10B670002C7CBD2D8AF153AF8EC90392F71F6EC18A
-:10B680005FA7003EA78B7B5F441ED055D375AEAF3E
-:10B69000B39228E95B9ECFB45AD9A0FB94B2BDBD4A
-:10B6A00028B750CEA6F8080F326F8EA97B8BF07B9F
-:10B6B000D99FFCEE61656FC6C5E2A960079EEC2DBF
-:10B6C000E0FA1EEDF5DDD38DF94A67E78EFC7E3595
-:10B6D0001B8C6FFB348C53C8F1FF6FF16BCD743E44
-:10B6E000DF57677E56C2CFDD65B1E8F376321F6C57
-:10B6F000513FACD17DC2321F90A5F71522BDFF7D11
-:10B700005ABCE71EE23F618F84DF305D88FFFAEDAF
-:10B71000F58F23DD976D38BF2ADA1B0ACF43DD375B
-:10B72000413F51F9922DCD9E743A5F97CAF7DF865B
-:10B73000A7547D80E7B9B0FC1D037F19CF6DB51C00
-:10B74000795241BFE52778DECD1CE917E3C36D0EC2
-:10B750006C37C4E34AE127292E9C551B565A0B230C
-:10B76000E78362E562D63AE3F9B3D87B14E7397A26
-:10B770003545C77D803E3AD7983343ECDB208EB108
-:10B780005E2AB727D54C13CF1F19A173FB32AF2FF9
-:10B79000277A1F449DC1ED8679F1AFDFA683E8FDCE
-:10B7A000C7A1BB96639ED4BC84D76FCB05F8FCA120
-:10B7B000EF2DC73CAA7999AF7F960BF2F6CB43FFEA
-:10B7C00087978F7BFDB39168231E6EE2E5531921A5
-:10B7D000C97438B89CF68766C87B137BE8BC762AA8
-:10B7E0001EAC98F4CD9FAAD534E8BA74CC90714BB6
-:10B7F00046E7B3FD077F7702E5945FC6797DC67D96
-:10B800004F26EE4DBC4AB2578A8BECA52BF177C080
-:10B81000E755E2BE1D932D4C781D13B9CFE4A1AFBF
-:10B8200073DF4EE47C3CBF3FA865230B18EF45F463
-:10B8300009FEE77944723CB2FF01E3C27B0193A2A7
-:10B84000C7B583DA91E3FAA4C81A542646F671E51F
-:10B85000B83E51FA7662D0A3EED82F5720DD3E7164
-:10B86000F6E5E0DF37393EE31DA2E327A97D3B156E
-:10B870004F146CE674F41EDE4EF6544586CF3B231F
-:10B8800015EF0FE0F716B40B3B726B6A20887E3D14
-:10B89000F01BE57106B3F9B986EA12E3DF61AB107C
-:10B8A000FCF59B197CFF7896755BC36B25788FBA86
-:10B8B000C29AA17EFDF9B316F4FBE71DE47FA775DC
-:10B8C000FD81B72DF47719108676D6EFB00CFA7794
-:10B8D000E00ECF5025DD0DFECAF3D9F96D29309E5B
-:10B8E000F5ABF8FDD88DBF4E9C8570E30A9C25FE14
-:10B8F0003DBD7DB3F0B365FE236DF85CCE7A9FC786
-:10B90000737F4B02463FE2FA5AA3DDBFACC168AF7A
-:10B910002FDF06D401BDB67C6366CC3D7EFC7EC0C5
-:10B9200025829E4BD2EFEDC17B0796B098FB018339
-:10B930003C8E743D9F013C8DF19179F8F7A4701E07
-:10B94000EB548AF33E9FBD59C3F370F50DFC5EB214
-:10B95000595D9F5AA81CEAE17E53DA707E0F9E94CF
-:10B960009F52BF5FFFDC2E33C60B62EF095CBE78CF
-:10B970000EDD07BE585FCBF5FB883FCE4A82F7B19C
-:10B98000F7FFD57471FD5EB35109E17DBBD7D71ABE
-:10B99000FD8165ACA70DFD99650DC6F7CB371AE1A2
-:10B9A000EFCD107A6D1C1B87EB63D30C45A373D5C9
-:10B9B000023E9DFDC757C2D07F5586BF6D06F0C9B8
-:10B9C0003A4B7802EAB9AA8C00C1B21CDEAFE77A22
-:10B9D00088EB7F13AC2492BF661EB708D6F17BD9E3
-:10B9E000AE1F600F44D90BEA40B84BCA4FBBFF36BD
-:10B9F000F2C39E53E8EF82576B3E2D29CA4F8EE566
-:10BA0000C35F0BBE7E85F516E2B8F291E9802EF990
-:10BA10008BF8DF7DCE3FBC82F22CF38B158F89D65D
-:10BA2000B1896DC4FBC4405EA05C40FB13EFC9C884
-:10BA3000573B17939C9E6871F3FB76D259F4FAF743
-:10BA40003DC914C4170E1DFBBD2AAB9BEEDB98DF6E
-:10BA500071EFA728E7F246F9BC0FC0F8B68AFBB42D
-:10BA6000B7FE5A217B767DE10B240F87015B60BF17
-:10BA7000EBD3855CEC32DE83310CE5141E68995BF8
-:10BA800048FD66C8FD0799E71BAEA27BA586897EA7
-:10BA90007F3F4BA779A7ADED5470DED92CD88C71C0
-:10BAA000A83D280B53234FB94F704D64FFBC02E9EA
-:10BAB0005997DE4BF7C2C8FDF341EACD46B933A032
-:10BAC0009E8F19F28066A9E75DB8BFDDF8DCA88B10
-:10BAD000E675A836E3FD9066B7F17EC8AB0A8CEB3D
-:10BAE0007B9EC7B8AEAF2E1B65285FE01B67285F43
-:10BAF00034A7D8005FE39F6AA87FDDE299C6384289
-:10BB0000BAF17E48BB6EBC1F32BEC0783FA4D3637F
-:10BB1000BC1F92A574525E9AC516EC0DE878BF0062
-:10BB2000BF8756CAE9712E1B5D2A17576C77E0B3A1
-:10BB3000BDC81A46BAB50FE7FBB9D6176F4F0F232A
-:10BB4000D613F6DA2AE1F9B412AAC2FD289BF01B3B
-:10BB50002FBB8B19E4F89533B91C974FE60BC457EC
-:10BB6000625C768F9EC9F3B67B2EBB587EC5A53E20
-:10BB7000FF2FC2784B6B0080000000001F8B080075
-:10BB800000000000000BED5A7D505457963FB7FB64
-:10BB900075D30D880D281F41F4A1A0262069418C82
-:10BBA0004E6636AFBB81693F3269FC986010D3ECBA
-:10BBB000E816138126D14C91AADDA255863466FE83
-:10BBC00048AC4CC6A452B5AD153399A9711713569C
-:10BBD000DB4DEB362AAEC99AB1DD31194D2A2974F5
-:10BBE000DD4CAC8C0A31E3985D77DD73EE7D8FEE32
-:10BBF000D73C12B23595AA9D5A28EA72DFBB9FE75F
-:10BC0000FBFCCEB3A503C022FC3B680BEF2B01B8B5
-:10BC100097E1FF4B01EED0CF0300A7EB5C16A50622
-:10BC2000A0E2AF9565300DDF45C05186E3F65A417D
-:10BC3000A17EF0A095CFAB880C9B94CCC4BCE7143C
-:10BC40005C683AC04F7DEE65B47E47943900C77595
-:10BC5000ECBE64952BA83F98A5605BE9BB6485CCDE
-:10BC6000E4E717ADF4BC431A497760FBF7FD666F54
-:10BC7000B822B1AED6BA142B5FFF6431B6788EE627
-:10BC800027CDE1343A3B282B5D8B011AE95F199FE0
-:10BC90001F18899971FFE676E60CE2A346F9B19583
-:10BCA0009085FFF82D97866D0036FCBD331BCF596C
-:10BCB00098B517EEE5F301F2001E05F1F3C892986E
-:10BCC000054C004DAD623CFDDCC1BF47D7D45F6180
-:10BCD00095B86E67CAF319BDA3E62C9A2F5D1A9E1C
-:10BCE000AF3E27BA2A53A67D5C8E9D72A8B8330753
-:10BCF000E0BCCF6478AF873C12BFD779BF87D3FB56
-:10BD0000A7483733233AA6D249D0EFABE8B31FCFC9
-:10BD10009ECCA7D4716B3C824FFB1934F6678E7FA3
-:10BD2000FF33958F7B59BC0ACC00011F0ACC54A469
-:10BD300087AD65F3E56AA2FFCD5E46F4FF070669AD
-:10BD4000B8FE07836FE5C95300AC0786F28671BD64
-:10BD500040FF501E2C0068B3C8DBA4695C0E9CDB5E
-:10BD6000902F1D91183F7F7B7FF5203D6F8F30A76F
-:10BD70001D8F1A1818ADE7F784E15E4726ED6B7C3E
-:10BD8000AE66C5C4CFD5AAC8BC0DF871CF69343F23
-:10BD90002D1C66C4F7612B978BC30C9EC5FEDE3E3F
-:10BDA0005B63D8609D75446F94EF137D5690504E41
-:10BDB000DA703EDDE364F149AB8DE4E600DE8BD161
-:10BDC0003DCEAECDA0F5B75A406689F35D2D8E7F8E
-:10BDD00044F7BFB0D102417CBE63A399D3FBC256E6
-:10BDE000335FC7BCE9DF7B8BB0BF0EE52F0D8F7AC9
-:10BDF0007CE38D9345B8EE8556ECE37D3D9B2C5C52
-:10BE0000FFD63DCEF8F854F9D5E4F525553ED7F9DF
-:10BE1000F5F2962AAFE3E4B4F5EBC9690FC96906F8
-:10BE200097D3CA3B66CEF7BA7C929FA7C0B98FF46E
-:10BE3000E7F6714B3E9E7776AFC3B91DFB0BCCE1A5
-:10BE40001FE7915D382EDE2F6CDBC3485FF0F08F6B
-:10BE5000D0BD8A4256D8C9488E04BF7EA6F24B8612
-:10BE6000119641FA2AC567FB503E706B85F8FCBA03
-:10BE7000051A0F54D073615F161C2AD8B333496E6C
-:10BE8000EB5579B499C0DF8FE3CAADE03F9049E349
-:10BE9000FBEF6AC075F6E37C7A3E535DAF6CCE482B
-:10BEA0007D03B687687FE4F31EF51C5AFF0724FF65
-:10BEB000D8C2CB260648F7076D82EECBBB62EBE912
-:10BEC0001E8B66F87F4EF66FE5CCF7DA00ED44681E
-:10BED000F6DB157E3A1F384D44F7804AF7E34B7F77
-:10BEE000F7F216BCAFFDEE74CED786632FC689CFAE
-:10BEF0001DA51210DFED658BF2FD06F2A7B5815B83
-:10BF000025E0CF4DF43BA2A3F58A815E6F50F57515
-:10BF10008155DC1FA248A4426E8FA525558971DA90
-:10BF2000FD01B6F3FBD9CB5EE17CDAF2382C34F3B9
-:10BF3000133FC7D7696A3BCB5A709D872D8A25135B
-:10BF4000E9FCDED4C6CD97CB00DEEE461389173967
-:10BF5000DD6D03FF3C805F773B783FDE5DC0FBFF1C
-:10BF6000DA2DF376DE4CDFDB0AAEB3F6446719D187
-:10BF7000EB78F10B3E37EE73FDB485D301C0CDE90C
-:10BF8000B44595BD1B5133D8F0FD8D01160696388A
-:10BF9000FF865B45E0477BF23EED8713DBBB7EC34C
-:10BFA000ED9CB375B45ECE24B9BAD84BFD40D71F13
-:10BFB000EA01DB8FD04F907C05220C0A709DF5B70B
-:10BFC00072F9FCF6C859AB4C72601AA927FA078FB0
-:10BFD0003220B90C748E72FBF932DE4BC173A7BBF1
-:10BFE000B2395D02D18526C1CF4526E2FF132AFF73
-:10BFF00007EFF98F2CB25FB62EF9CCFDC4C753669C
-:10C00000CEC79DEE912C87015FCEE3BA9026CE4F2E
-:10C010006DEAFB466BB0CC89F31A55B94D7D6F754F
-:10C0200009B9440A5B7C5304AD18D26DBD2A5FCDBB
-:10C030007895A939D88FB0583AEA6D73D47345A270
-:10C04000B693C1259D3D00B8A4E9B37962799B6C94
-:10C05000DB41EB9525D94B3F2E3A3FB15F536B0641
-:10C0600039D1A4FD83FC1E69C5A5F97E837B8EC9E9
-:10C07000FB7011C8C8AF8E100319E5BEFD56396FAD
-:10C08000AF1D7E5A263DB1A58FBC407E01E69A1CAD
-:10C09000FB90BFED415092FDDCA85BE8EDA85BE8AA
-:10C0A000F14C17933EB671BB554EF77617FA4B5CC1
-:10C0B000788EDF17BF97750C1FB759639560FCBC6E
-:10C0C00003D01FDB489F70DF72E4CFEB06E7BEE9C9
-:10C0D00076CFA57933E1592EDF80F24D72957ACF74
-:10C0E000852E712E4D9FD71DBB621D26B98D18EB75
-:10C0F00033F3B816D2BA7D005E233FF747F59EEDC5
-:10C10000BB19A75760772EA7D355D8ED73A35C5EF4
-:10C11000C573EC45B9BCEEF36564E3FCEB7E5F46AA
-:10C120004E6642FF3B7667F0797DA5AB725BB05FF0
-:10C130004F728FFB5D8B786C44E70DBB85DE69FB2E
-:10C140007D145B974BFA536319B13AF1FD8CE8C546
-:10C150002C8AEB6A0EAFCE25FD9BE89C8BDDC22EB0
-:10C16000B5776DD97C3957C88319F569B3EAC70229
-:10C17000DB6356A2FFE62EE0F23B78F0830ED2DFBF
-:10C180006BD10C07F9BDAB47328264EFAF1F4D0B8B
-:10C19000A32586369277B467572DC3DFE3F1E361B9
-:10C1A000B32388E302473F7D81F4317010B511D786
-:10C1B000DD1C7D7A94FC5B5B74D91589DA5F7DB3F5
-:10C1C000FAD0DEF5237E5FADFF69B74D26FB794DD2
-:10C1D00012766273E40D1ECF6EBE7DA3D25741F777
-:10C1E000FCCFC564CF02FF746331D9B1C09B371651
-:10C1F000D3FBC0A18C4EA3F8A4D563E6FCD7FC63A7
-:10C20000C93949491E97ADFAAF929E67BDB3917E79
-:10C210003567D738CD72E27D4D99C947E36BDEAD06
-:10C22000CDDD9434AF272E79E9F9A2B3B5191B936C
-:10C23000E4D2EAB1A87608B51AEDCF3A9586EB0AB2
-:10C240007E123757525F0AAA7104BBC3E36D902573
-:10C25000E47313FD87AAD81797783C136C3587CB06
-:10C26000F07D53DCA4D82BE93DCE4B8A33007C2BE8
-:10C270001610BF7F38DDB953E6FE1EBAA9FF545928
-:10C2800098FC3D046D43A54971D0BAB829968672D1
-:10C29000D3184D8B513CB42E2E5DE47D353EFAC84B
-:10C2A000F1FA8F67038F8F2E27C739180F5DD6C716
-:10C2B0004B3085CEABC54BEF515C85F16CF3D69816
-:10C2C00085FC15C649BAF18F367EF70AA338A94B0B
-:10C2D000FFBC242E991EC47B96A0B92332F4C59FBF
-:10C2E000B7917E687126F16BC040DF2B553DD1F4CC
-:10C2F000A8276EE27CE889BB6DA5D8CE53DF0F3846
-:10C300004C10C4F57BA2ABF7318ACB6E3F9C41F455
-:10C31000EA39B70AB693BE3BDCB6329A77FBBBB6B6
-:10C32000B51509F918673F5CAA7D1C8B078CFDDCED
-:10C33000272E35AEFA86FCDDE53F177FA7F83F25AF
-:10C34000FB5DF19ADC44F121DEE71E8A6753FD8430
-:10C35000667FB5758B543E8FB7BF5778FC82F92F37
-:10C36000B7BF456E998F9B116DC8E579F1B935B9A5
-:10C3700072E6F8F5E7484E534EC5F8F5B5782D103E
-:10C3800054866C94C72866AE9F81352CCCA8EF6389
-:10C390003CCE0EACB784E9BD769EF81AC6C7AD7523
-:10C3A000B2B09D25E23F2D3E1C7BBF08DF9724E203
-:10C3B000452D2E8CFB18CF83D62816FE7EDE4C7FB3
-:10C3C0008EBB86EE67E7CF6B968A75D10E0C517ED9
-:10C3D000F4F0F719703BA0C68B9A7CA6C6939F45D4
-:10C3E000E74C852F892B5E56E552D3AF99297AA168
-:10C3F000F9A97AD54F77909FAE263FFD8595F460D9
-:10C40000A2B81BFDF45C379F077CFEA277259F51E5
-:10C41000DE7D585D77B1C6B7F809179DB718E2DB26
-:10C42000285F9CC87FE6794C3ABB90FABE7E927A30
-:10C43000DCA2C60BDF941E37ABF1D7FF753D1E8B18
-:10C44000FFACC6F7BCE976FD15C96FBAB933EE2269
-:10C45000BDFB17D43B79FCB8222D9F9440C79FA108
-:10C4600062AB89F29E40ABC00142D9F2199E9FBCDB
-:10C4700065065A67F3AD421EA73D762B9BB7A142D6
-:10C48000107EF4C9128EDB3CF6DA598B82F39BB630
-:10C49000B285840735B5EAEF139AAE709C2D788487
-:10C4A000F1783954D87F92F42AB86F8E4CEB37D399
-:10C4B00065090F69CD0EEF20FC82709C7BE9797ACB
-:10C4C000820EB84FBBFAFC7E15DF819438E0CDC1F7
-:10C4D0000B1CEF090C3020FDB546D17E903D39256F
-:10C4E000F08E8EA8B00B9F74D9B93DF94412F708AD
-:10C4F00074B1F036968823AE449FCB233D1B174F73
-:10C5000028184FE425E289F657DEE5F630357EC877
-:10C510001910FB04DACC61C263868A1733EAB76369
-:10C520003E984F71A22C3F5424CE05616E57141DC6
-:10C530004EB2F72EE1F73F3BF56F3C8F6C3ACC20C3
-:10C5400097C71D4ABC342F11773C1A5ACEFDBF162F
-:10C55000673C3AEBE45011ADA7C6190EFC25FC3040
-:10C5600035CEE8889CB5505E302E9E4889235E7794
-:10C57000EB71C15992C05967459983F0A4592A3D7E
-:10C58000EFEB4BE77171FD871B7349CF35FE5C6B99
-:10C5900010FCBA76E17317CD5BFCA1E4207BFBE6CF
-:10C5A00085ADBF29127DD926D3BCAD1994875CFB1C
-:10C5B000F0890CA2E79BD802EAEBA1F392217E2836
-:10C5C000ABF608FDDB3FBB39FE2B17715C4742FF22
-:10C5D000362581BFA4CE7BC023EC4108D30C8E3B13
-:10C5E0001E062EBFA142FF72DE7F7136ECE3B88FCC
-:10C5F00090D737A2D90E8AF7CAF1B25D6827FE2E0E
-:10C600001D7AEC5524CFFEB7B97EBC68E2F28BF3FD
-:10C61000838CFA0764EEEF8864EB717CA515CF522A
-:10C62000056233D4B77B54BE15621E4AF9209E665C
-:10C63000CD1DA453F98C535F101F2BD341A2F59F3E
-:10C64000B1F877DE8D539E19949CDB688EE4CC6D37
-:10C65000C07B3D63174B3D7318E515CF85D2CDCF19
-:10C66000D55171F23CCD67B203D6E3FC8E82CC1873
-:10C67000E16710B1FC7E4C2E510E18ED5329E4ED0C
-:10C68000E3F9141B2AEC0E9A9AB7EB646117BEEF1C
-:10C6900003CA83762CE904CA3B4FD6811A07D98294
-:10C6A0009771FC5A9C31159F4F2FF417525CD15E45
-:10C6B000306C1571C58895E28AB92E6DBCC0ED4C01
-:10C6C000389EECE5CEF9AF73796BA2E749FA0CC955
-:10C6D000F89E797CBFC53DD1FEB2C8E752F65F94A3
-:10C6E000FD591ECF5FFEEB8F59DC9F456F70BF7306
-:10C6F0007D240DE21CB71B163875D4C2F3F5EB98F8
-:10C70000074D4FF2673B5C820EC7A21E2E8F03F1CE
-:10C71000DA0C1AFF4B97D8AFEFDC9AD50F929CC476
-:10C720002567193FA5C86B06E2528D880FC6D1A9AF
-:10C73000CA6D704E5BBAB0E7A9F279C92DE4FA125E
-:10C74000DD1BCFE1B920F295C056513F70A8FA1613
-:10C75000E864DCAE9C2CCE631A8E9C6F545F383C30
-:10C76000C2ED6CF30F9933284F5C5FD8A5E619A989
-:10C7700076A8237240F02D15B7F5D673BB3359DC7C
-:10C7800016281B5E9CB0D3DFF1A8766581C0714F7F
-:10C79000B81DFCBE399D0B5DF990B8BF013DF77B1C
-:10C7A0006AC6D3D3605CB4D680EE06E3FEF0C0E484
-:10C7B000D6AB5626B79E6B92E35A94C9ED7B68922E
-:10C7C000EBED99E47A4F1AE92DB25DC4030E2137DF
-:10C7D00075E6DB5924FF4F1C9993FF65F1AC190DE9
-:10C7E000AD9CC47F8B231DE424BFBF627EAEAEFF31
-:10C7F000A0B34837FEA1257374EF1B9472DDFBD5FF
-:10C80000DE6A5D7FADEF7EDDF8871B3DBA7E5AC1E3
-:10C8100072DD78BBBC4AD7CF98FF886E7C087566FE
-:10C8200009DACF346B6688A1FC4F71FEA56E7C7A65
-:10C83000B53D93F422B4302D46F29EF6D6A620BD27
-:10C840007B9AFD642446D4CD3AD8C85065A5EC57F0
-:10C850006CA4272B978ABA405FAD2DBC87E29CBBA6
-:10C86000B22A69BE46AF7D7522FE72548C06739162
-:10C87000CE3395786D2EEAF3F5A5C0F387EB7651AC
-:10C880001F00C951D8C0F9E7285C85763F6437AEF0
-:10C890003335D6A979F104F6E4749DEB17A42F0E75
-:10C8A0008ACB0DF8A8A878BD23021CB701492E5CDD
-:10C8B000C5F7950BC9DF4C3D219E67C540D9C3CF55
-:10C8C0002597ACE271B45C42E7DBA5D6BF7296CF88
-:10C8D0002D21BC2E07FD2ED5479EA33A09CF031C60
-:10C8E0007C9CB69FB356ECB7CB028CEA59C1BB19FE
-:10C8F0008F53C1315557DF386D895D6E61BCBE7194
-:10C9000082CEFF8E2956B1B744F085E85B31E0E076
-:10C9100075975F2FFDF97C3FDF47D43BB638C49055
-:10C92000E3946FE039B61CA9E6F2DB746CE96FD7CB
-:10C93000535C582A713A8F8BC7D53CEBBC9A276A57
-:10C9400079D630E58B4979C7798F6922BB74DE636C
-:10C95000A057BB98C88383EF883CB8DAEA9CD39988
-:10C96000C4A7CB6A3CDE121378AC96DF562A61531B
-:10C970001ED2A1FA29732C0DFD7575EF022BD9ED8E
-:10C98000EADEE2748E2F6D3C60D2E86DC4F76BEA8C
-:10C9900039FB4E8DF0FAC41B29754A67AD95BFFF70
-:10C9A0005B551E9DB5C0DB2D65D20E72C353BFED26
-:10C9B000301BE1E3CD18FFD3F95A42E2BC5A3DA443
-:10C9C00039267B689F8B4323BDD456B59678387E35
-:10C9D000D836DA4BFE3370FBC6C907381E6095297E
-:10C9E000BE4A5DF7509D99CBC51B149010BD96496A
-:10C9F000611A57BD4CE2FCCE69B6F37C3CC702E637
-:10CA00004CEA37087F56E59DE6A13EACC9E6FEB884
-:10CA1000EA949CBDA92291EFE72CDB3A9DE8F455FE
-:10CA200075220D37983753994A7EE3EBD689DA4F52
-:10CA30009FB3D2BD370CEBEB445ADD67A23A915657
-:10CA4000A70D783FD7D59503D2483DE12BD5472E8A
-:10CA5000F23A7120C21C052589FA516060D4CAE9F6
-:10CA6000ABD68D70BC95E60D748BFAD141DC9FDAA4
-:10CA700008DE57C173FC23DE97DA28DE979E1FED90
-:10CA80009ECFDB58B793B7C7BA97F0B61AC5A63092
-:10CA900087EA4EA3BCEE5453ABAF5B68750977A130
-:10CAA0006F496D8DAE6EC1FBA9750B73BAC8470394
-:10CAB000A72CCEBDF83C70DAC6EDAC2BDA328BE297
-:10CAC000B29B67FDB31CBC0E90CBF3CA31F9559CE9
-:10CAD000F66CCA077C4E3BD50BAA07AF58656E773C
-:10CAE00062455040F853DC4A793FD141E1F19CCB9B
-:10CAF0004E74FD4A7C3FF2FFF8FED7C1F7A37502E2
-:10CB0000DFD7EC4795CFA4ECA1F69462DF94641FC5
-:10CB1000FA7C0227EE2B9DCDF5EF79DFECEC8DC989
-:10CB200078BE57E47139CB4AEDC9CF59BD45C47DB4
-:10CB30000C7C4676ACB776427BDB6B1CDF19D705E5
-:10CB4000FABCC28E68B8FFF83A81F3ADD224BCFFBC
-:10CB5000DA3B28A798B70E1E4EE3FEFCE691B4BD63
-:10CB6000147F577937CE9A82FDAAF3695022FC913F
-:10CB7000AEBED0E43529F62CA37A82526442B91DA8
-:10CB80005737F09AB87D1FAB1B78A58BBCAFC6E9B1
-:10CB90001B467F37A58411FDC321CA33DE6867CEEB
-:10CBA00041185F47C0858B6009DEC27B8ED7959D9B
-:10CBB0009DCC29CB5F5D5FC85371868E48B699E4E2
-:10CBC000BCF904402E33AA337879BC5F05CF866A5E
-:10CBD000E97BAC529383FC592A5E407242FE3F15BA
-:10CBE000278CAA7C8CD60A7F53E711FEA64A8D4B70
-:10CBF000B479A9FCCF56FDD344B82353E39F1E6FED
-:10CC0000551FF12FB8D204E4077ABC6E5B69D27A63
-:10CC1000676AC5774BBBA86E312DB96E21EA13A99F
-:10CC2000F50ACD4E550F7E514FFC7F3E2AF0A440B1
-:10CC300081C037AB8FBA4E91DE27CE29EEF73CF29A
-:10CC400038CEE3286736887B814DE05E1C67A85AA2
-:10CC5000F9F9B10CA29F0FFD15D9A5D3A53B32C997
-:10CC60009EAC946A98CCF1EE31FC9BF0A9D5675A42
-:10CC70009703F9FFB50BCF12DDD7AEB7F0EF9034C5
-:10CC80007FB5FA4C63BD78BF677B3ABD9FCF9C767A
-:10CC9000999E7BDDF47CC5AF6284F4C183747BD440
-:10CCA0009BF8E9CB12E9CBBC99FEEBA43FD50D2A4A
-:10CCB0000EBE5EF8D7B5D1060B648EF777C78B6FC3
-:10CCC000F23CFA46B49AE3DBB9547FAD48F88BEAFC
-:10CCD00023E887A6FCE9FC50769DC807EF453F4452
-:10CCE000E7C9691075C254FE9F51E3C989FCCA4463
-:10CCF0007694FC886989D01B5690F0BF32E5D7F74F
-:10CD000025FCB02382FDFC2FC1BD55B9CE9E200E5F
-:10CD100073ABF23BE1F71B916F0607FF8BBA3F8FB6
-:10CD20007A9696E76878B89617BDA8D2596B5F5285
-:10CD3000DB54BC4CC3C9F21580AE2FC1C9F2094700
-:10CD4000CB21B35DC171BB42F50C63B8592CC774DC
-:10CD5000A71CC7A9B89D869FE56DE86714671443B3
-:10CD6000701BD997212BB80E4CA3EFF6186C23FD3E
-:10CD70000E37F03867E8A5F77B7F41DF1B0E3007E1
-:10CD8000B99FF6FEB3DC4FB7635CC3E3A1E8A7022B
-:10CD9000A7EA17DF9BB647986284830EAAFEB956AE
-:10CDA000016E37DAD5EFFAEA07845E2770A21F49D1
-:10CDB000C93851408E4FD7BE170C0BFF64F85D5F2A
-:10CDC000078CF0EF013B5A993386CF5371A354BCC3
-:10CDD000E859F53BC0097123E5EB7DEFB7BD6EEC7B
-:10CDE0007B3F8E3FEFF308BBD0E8678CD6B7997CCA
-:10CDF0006DFCBBDFA3CC61F4FDE86E55EE57A8F8DF
-:10CE0000EDAB56210FAF7E8B85299E5B0102A77D7E
-:10CE1000F5680BC76F5FAD624E13DD53C56B97AB03
-:10CE2000F4B83B81D73E4F78EDF7D09D104EBB4212
-:10CE3000E53F40989FAB61777A8CE28D672CFD05CA
-:10CE4000A48FDAF7465E15474D4F834E23FDECA9BC
-:10CE50007379EB6A68DC84F1CE2B7506F8CE558FBA
-:10CE600058F7977518A7CF07A3387D7FDD745D9CB1
-:10CE7000CEFBA971FA9F0AAFF5D03D8DCFFFDF93AE
-:10CE8000C4ED1EAF9DDCB84D7506F1DF0E153F49B0
-:10CE9000A56F66BD66876738B83C8D9D1F443D57BA
-:10CEA000C5BD86543F1762F26FEFE7F52F0BAF7FDA
-:10CEB0006976263445ACFF816A5FB4F6A6DA862C23
-:10CEC000C6380DAB177EEADB85CAFBC4C7F2D7F4C0
-:10CED000B8D9827E3D6E766F2447D75F18BB4B373B
-:10CEE000BEFAD46CDDFB9AF83DBAF7F79DAFD2F5E8
-:10CEF000970E7F4B37FEFE4FDCBAFE7746F4B8D96B
-:10CF000003B7F4B89926DF2E9488E4791EDB0F74FA
-:10CF1000E38A5AF5F72AEED4DF6B5697FE5EDABA4B
-:10CF20002541FDFDE684F4F7CB215CBFE27F8FEB6A
-:10CF3000FF4DADCCE97F2C3AC74EF376794BED141B
-:10CF4000C74C2F14F2AA8DFB1FAC27E8D970300014
-:10CF500000000000000000001F8B0800000000001F
-:10CF6000000BE3146060F8510FC1D3F9191836F3C0
-:10CF700023F8F4C0C79819188E83302303C33E20CA
-:10CF8000DE0AC46B80F83D0303C352203D078827A7
-:10CF900003711710BF048AD5B1623787858D8181EF
-:10CFA0000D884F02CD3AC54CBCFD8A7C08F6215E47
-:10CFB0000686B5407C9497BE6130D8F00C41FAD912
-:10CFC000F50C6AD76ED181F73708B38A3330304A0F
-:10CFD00020F8FD12A8F26CE20876960C65769501B1
-:10CFE000F50300295128158003000000000000000F
-:10CFF0001F8B080000000000000BED7D09785445F0
-:10D00000B670DDEE7B7B49BA3B9D90952574802000
-:10D010002A4BCB1201113B2189010306440928D276
-:10D020006C2184249D01661E3EFDFF6E0842C4D122
-:10D03000898A1AFC195F83E004079DE0A0139DC054
-:10D04000348B8833E804C70597795F401E2042126D
-:10D05000A338E8F3C9AB73AA6EBAEB763769B7FFAA
-:10D06000F97FFF840F8ABA55F7D4A9B3D5A95375B0
-:10D070004F14924292FA1372097E6E20E455851085
-:10D08000FAA8BBEC903A87CB0383ED6BBD2EE2325E
-:10D0900012F280D784E57A6F3A715D419F8FD61581
-:10D0A000F92D84DCEFB5E3F3C7BD25583EEA2DC565
-:10D0B000F211AF1BFB3DE42DC7F257DE1A2CEFF542
-:10D0C00016617B9D7715D66F5416A4C1B884B84CF1
-:10D0D00059C984785E1E387203ADADCF1C9F208F76
-:10D0E000A6F5BFEA893E8BBE375A2EF20FA50D7208
-:10D0F0004951D6E8603F15CF1B95BCBE00E7F1B1A2
-:10D100003AD6CF54F35A76E47E59640CC573AC8C8E
-:10D11000F8134BC9E4ECE488FD0603BC4786B279FA
-:10D1200012BBF3B54191E15D0DF01E1ACAF14BB689
-:10D130004F1E14199E13FAFDCAC9E1A5771E1E18C9
-:10D14000B9DF18E857E7E4F0FAFA4C03228F3B1EE8
-:10D15000FAC5C0278A1321BE16A33F3BEBFBF38B16
-:10D16000B8E85F8A4FC75EF3D60D12F26F1AD06926
-:10D17000AD7DF9992D749CF696614EBD8390CF5C80
-:10D18000CE04BB2526BEDD02F388816FA5304E0C90
-:10D190007C9B1B23DF1640BF18F8B604FAC5C0B746
-:10D1A000CA18F9F6B39F08DFEE053CBE07DF36C4A8
-:10D1B000A86FBF8A916F1B63E4DBA618F5EDC91851
-:10D1C000F9F65428DFD4E76AB9834868176F544AE0
-:10D1D00076403F4F669B6D40D64F827F7BBEA7DE79
-:10D1E000ED8F917FAFC6C8BF23409F18F8773446B4
-:10D1F000FEBD1323FF3E8851EFDA709DB1C85FB5C5
-:10D200000D21F8736900FC6BB19FBA9AD7F580774E
-:10D21000122119E172A09694A3280F3271B7B37549
-:10D22000ABE09B4B3984AC30D1FFD2F77D7924A0A1
-:10D23000A7E3FB6CC45F2B09FD3F073C09C9FFE670
-:10D2400052AAD0DFA78BD89FE8A0FD61902BCAFF20
-:10D25000CDDE2158D67339DA5CA44379F0251B5012
-:10D26000BE9EF03AB1BDC13B16CBC7B85C6EE4724E
-:10D27000F400C8DD152087A55CAE98DC1152E228C9
-:10D28000A774EDD8134F363850AECC12E02933795D
-:10D29000BB77CF955B3750F89B6B74576E0B91B390
-:10D2A000278A54F9A292991CECF744F909DB82A170
-:10D2B000486F1BC06928D6A9FD7CA1FD1ADCDDFDE5
-:10D2C0007A41BFC78AB97CC924103AEE63A5DDFD57
-:10D2D000D2254A977B2552DA6409E7CB1489E929DC
-:10D2E0005514E487CCE9BB3FEF2C69A3EFDBEC23BB
-:10D2F000D3082D9F04FD44FD7360A9BE5F4FE9EC88
-:10D30000A6F4C834929A26C097B44A0AC5571EEBB1
-:10D310004804397A689C8B485642FA433B1DBFCF7C
-:10D32000E8369245CBC4F16D441A06FD683BADA7C3
-:10D33000F0F68CA1B49DC27908DAADC1F654DE9E38
-:10D34000E6E0EF5FC7DA1FF6121C5FED771FE5B36B
-:10D350009BE2B78EE28BCF8B890BE8285376FA439A
-:10D36000E63F5BD2E3BC2B79A9E27F5FF6A98CF99B
-:10D370004383F89A075FCC981F82DF7D83E7605D67
-:10D38000C5C77C4525D6FBAFEA4D3D31AE0F249C89
-:10D39000CEA9330708ED0ED9897E9AE3889EF82836
-:10D3A000BF1C543C23F1E70B2ACE3FA8FEB9183D21
-:10D3B000B4ED776BE8B02E43A483A1B7488775BD61
-:10D3C000453A18FA5C9E0E532407C28F460F75DC4F
-:10D3D0000D578AE3C65D258EBBE12A71DCB8AB7FB1
-:10D3E0009871D7F713C735668AE3AECF14C735F601
-:10D3F000FF7EE312D9491F3273411CF0CF3CC1BEFE
-:10D400005D20EE8741BFC1CEE99383764EB697107B
-:10D41000B725C84F22D3977342E1DC29D8550AE7D4
-:10D42000FF7038AECBC3B16BE0CCD5C2D9C6E190AA
-:10D43000503B1D0687DCA19DC76FF97B015DC8F8D5
-:10D44000747D2525D6D0F79C9AF16FD78EBF1BEC43
-:10D4500018CC4377D9F11D1ABACED1E2B387C321D4
-:10D46000BACBD183D83570666BE11CE27002D2650D
-:10D47000E1946AE7F1BACA574958BF283D8605DFEB
-:10D48000EBC8EB3C857ED08B8A633B6D97FE640DC9
-:10D49000DC40FB1FD922F98DB41ED81B8FEBC7F9D6
-:10D4A0006DD3B1BEEF1A23AE13E79D93FD466A4FCD
-:10D4B00026BDF0B60DEC4BD50B7A19EABABD1FDBD1
-:10D4C000DA285E1E63EB83D7D1E79D2FE8C9569417
-:10D4D000C6421DD0FD14974DB28AD5CBCCAC5AB5FF
-:10D4E00065DF9D00B7BCD948CC144ED54B4BA65D2B
-:10D4F00047EB4B0E2B04BA546D5F6DE84DEB4BFDC3
-:10D500005213D43BF24839E8D39ABDFFD90EEBD180
-:10D51000F9DD4A368C7F96AE130E6A8F8F585B53B7
-:10D5200067523C2AFCBB0AE1BD8A9D92935A388A15
-:10D53000EFF6431980EF0EC969A4F45ED6184F1CAC
-:10D54000AABDA37F4FEDD6E3FC97D3F9130A6F0969
-:10D55000A92F047A560171607CA7D16F9682FA7662
-:10D56000D67B18C753EB553BE878F4FDEAE7242750
-:10D570004CB55A47DC8067FB4BE6D2A72C30CFD5A1
-:10D5800086C15698DF7A03F45BE29FFFA2D9017847
-:10D590006E311402BE9BB718CA8602FDC8BC92A1A8
-:10D5A00080DF5F44FC1AF42E98EFF26B8C5BF5C0C1
-:10D5B0004F4B60D00C6BB89D3D4BD72B47C8FA59E9
-:10D5C0004198DD27B2DF307D58F0F94BFA4494835F
-:10D5D000658D7AE208B51B5C3E7C4709F363F6581B
-:10D5E000FDDBB3827C5C6EE7F2CAF9B83C91F3557F
-:10D5F000EECC99312C1C9F07812F46E61F41F93054
-:10D600005D371DE8FF38907E8F51FFC981FE911371
-:10D610009F3F41FD242837533F09CA27A99F04A5EE
-:10D620009FFA49D06F2BF593A0DC46FD2478FE3499
-:10D63000F5CFA16CA4FE393C7F86FAE550EEF4FAF2
-:10D64000F0F973DE3A2C9BBCF5583EEF6DC072B713
-:10D65000D78FFD5EF43662D9EC6DC2E72F7B9BB1AC
-:10D660006CF106B0DC0B7CA665C0DB8AE57EEF3191
-:10D670002C0F7ADBF0BD43DE3358FE92D3DD3681CA
-:10D68000E4CA545E6C2E6207362515BB72C15F4931
-:10D690002A61F5D43B7CB9065A4F75D33AA563EF9E
-:10D6A000CA40AE91D67BD7B0F6CC7B489E89D633A4
-:10D6B0007DAC7DC02F5D79665A1F50CFDA076FF6BB
-:10D6C000E5C5D1FA603F6BBF6A67202F9ED6AF6A6F
-:10D6D00062EDC35BC8240BAD0F0FB0FAC823AE498F
-:10D6E000565A1FD9CAEA391FFA26D9683DA78DBDF7
-:10D6F0003FFE5C605202AD8FEF64ED13BF26F976FA
-:10D700005A9F4824ACE75972F313693DCFCEEA859E
-:10D710007DE7CB8E08EBFB5EA56D2198B49FEB7285
-:10D720007265EA27EC35B4AD0093BB5E7743AE3C3F
-:10D730008ED24F218BA07D93AE88D50D6425B4FF8A
-:10D7400056371DEBFB1507B6EFD1CD61758303DBB3
-:10D75000FFAA5B88F5838A0BDB8FEB2A59DDE0C2D9
-:10D76000F6CF743FC7F10E296E6C57F4FF9BD50DB1
-:10D770006E6C7F585E9F9B4FFB57EADD1E1D95EB3D
-:10D780005AC95D4E0682BC36A5833D5CC7FDD6599D
-:10D790003A07CAFDBA0C03EAD9DEFFCA790AF50CCA
-:10D7A0007E92A15EF634F8BD14CE2A84A35038FAD6
-:10D7B0009EE14CFC66AC0067E237E52A9CD508C7C1
-:10D7C0001C1B9CBDDF8C17F1F9A64285B34147EDC8
-:10D7D0007DAD35B6794DBC3441C4E752A50AE71199
-:10D7E000C42731367C02CAB5029C80B24485B31985
-:10D7F000E1A4C4868FCB304E80E3322C55E16C47D8
-:10D800003819B1C10918AE13F1312C53E13C87F43A
-:10D81000E917DBBC5CC6EB457C8C552A9C3F203E5F
-:10D8200059B1C1D96F15E9B3DFDA4D9F00C2C98E76
-:10D830006D5E7936913E79B66EFABC8670AE8C0D0F
-:10D84000CE7E9B489FFDB66EFABC897086C536AF0A
-:10D85000BC04913E7909DDF4F900E15C131B3E073D
-:10D860005344FA1C4CE9A6CF49843326367CF25344
-:10D8700045FAE4A776D3E73CC219171B9C83A9227B
-:10D880007D0EA676D3E70B84737D6CF3CA4F13E944
-:10D89000939FD64D9F4B0827D7DD88F8100AC71AEB
-:10D8A0001DCEA17E227D0EF5EBA68F490F700A28B2
-:10D8B0009C813DC329CC14E95398D94D9F443DE840
-:10D8C000C5E4D8E01CCA14E97328B39B3EBD119F80
-:10D8D000A9B1CDABB0BF489FC2FE8C3E1E63E7240A
-:10D8E0003BF88D89C4B995BE3229F9670761DD51CE
-:10D8F0002CC409608F48816D009FAEADE897CA4E79
-:10D90000D50F7212F0738B6D0E27C403F4AABF43B8
-:10D910005A713F62D99928C49B5ED2E70D077CAD4E
-:10D92000D42B0CF57B12C6C609FE56A22B49A8F7CC
-:10D930002AEA2DF44F291920B4A7955E25B467B8BB
-:10D94000470AF53EE5E385FEFD6AF2847AFF55530A
-:10D9500084FE59BE19427D60DD1CA17F76FD02A1C7
-:10D96000FD8A860AA1FD4AFF72A17E75E3BF0AFD0A
-:10D970008735AD11DA47346F10DAAF093C2CD44744
-:10D980001D7E42E83FA675ABD07EEDB16784F6718F
-:10D990006DCF0BF5EBCEBC2CF4BFBE73BF50BFE117
-:10D9A000E29F85FEB9E46F427D92E903A17F81FD8C
-:10D9B00023A1FDC6F44F347EAC18BFA8CD25CC9F63
-:10D9C000CD30A03F1BB01AB06ED86B66FB1BA827EA
-:10D9D000431CA218EB86FD0B1DC9100F0000D49F3D
-:10D9E000C8ED5D7E05C4AB7E31DE7D05C4717F610F
-:10D9F000708FB047F083DA65F73D7A8C27B64A24FA
-:10DA00001D4A870ECA383D8F271899FCAECFCA79B8
-:10DA1000CA17A20775FDA87F41EBEBF5148F3141C2
-:10DA2000FD59DFAF2C7D7EC838EBFA194AB70E6579
-:10DA3000CF175A60BC92FB603C8FA17330E0A51DEC
-:10DA4000C73860AC308E29B31CC7D908E3A404C71B
-:10DA50003166966BC631956EE5CFF9388F81DE441D
-:10DA60001B67FD80F1E27C322B709C2D9A71D6678A
-:10DA70005668C68963F3A1CFF9384F5D6E1CE3C0C9
-:10DA800009E27CFA57E238CF69E7D3BF52338E05FB
-:10DA9000C781E7300EE94B77316994CFC6CE329417
-:10DAA000833F99314E66E853F11BA8930FCC241B9A
-:10DAB000C671D071693F3224890A3521FFA24F42D5
-:10DAC000FE7C1147F91F124F0BEEC77DB8AF5FCC3C
-:10DAD00051247E8A11DD275573D95CB4737AE60A26
-:10DAE000072D9B0F0C7A04C6D9687566D37A7BF331
-:10DAF00024C3C208F2B4B85E39D51622E7DDFBB301
-:10DB00003C32A4868EBF22CE8EF8A875B54CD28941
-:10DB1000CF4FD07D17A1FB930FE93E85D0FDCA47BB
-:10DB20000ADB67FE3BDD9F41BD8DEECFA09D90D50A
-:10DB3000F8DE091E673EF14BC90FF4FEE2AE9F29E5
-:10DB4000B84EF8C85BE9A9104D603FF356C553269F
-:10DB500004F19BEFEB25D4A939EEA34BC77D2DC66D
-:10DB60000F3A5F32FAB7025DEBFA509AF27E030881
-:10DB70007977EFD443920DAB7D746309995933BD26
-:10DB8000200DB548EAB79CE23963F7350A7D83B4C6
-:10DB90002B6D773A2D41B8C4A59C00FA98E81F80F8
-:10DBA000734B11AD878C7F6B89589F45E4609DF264
-:10DBB000FBA47E0061F17F3EAEC3A5005F4BE81C75
-:10DBC0003328AB674139129A59BCA6D4CEDE55F141
-:10DBD000F12C544800F7D7BE148863135F32F69BCC
-:10DBE000A3EE9335F8952A265709A56BE97C3DD21B
-:10DBF000558BEFFB7BE35DBAE1B4AC7B4481D06C29
-:10DC00004FF8CF768BEDA49C8DA7D2559597539C5A
-:10DC1000BF2780FFB43C0DFCA7789FE4FC0FCA31FE
-:10DC2000E3BFC7E89E06FCEFDCA427C82FCEF7DBD6
-:10DC300038DF17D78B7CBF0DCEE368FFDB5666B1AC
-:10DC40007853432F81BF74E2221DEA1F2AA0663554
-:10DC50000CFFBF73399853B7EB1560EFEDE59AF9F8
-:10DC6000713EDCC9F93057438FDB38DFE672BE2DD9
-:10DC700021BE7B33307EE15720AE37BB5C22602F64
-:10DC80003C77AB7C6B13F8E656F9A6C1F74ECEB7DE
-:10DC90003BEF627CD3E2DDC6F9D6D6F0994206842A
-:10DCA000E3ADC573DE2ACDBC7C5ABED573B9B41BB7
-:10DCB000C09F9AEECA5D7132A4FF2D4593579C0C0C
-:10DCC000B10BB7964C17EAB34A670BFD67BBE70B7E
-:10DCD000EDB7972F15DAE7D6FC4CA8CF5B7597D038
-:10DCE0007FBE6FB5D0BEB0EE3EA17D71FD43427DDB
-:10DCF00049C326A1FF52FF16A17D59E30EA1BDAA7B
-:10DD0000699750F734BF24F4D7EDBDF26690AF2386
-:10DD10006FEB09C4FB2E384F639CF1825371429F15
-:10DD2000935E07CAF129EF102CCF789D28E767BDD5
-:10DD300063B1AC06991C0776F68005E2A79E386AA7
-:10DD4000F713E93A2E8F5B533701D61BDA3E9E90CC
-:10DD50007F956F58E3EB4BB500E2DE94FEC50D06F0
-:10DD6000121845A874F7EE96E74E7D487B5B0FEDE1
-:10DD70000D3209F40A6F2F6E8BFCBC43EA1C9C0128
-:10DD800071D9F78C647B48BC31FCBC85F401BF229F
-:10DD90005AFB391D290F3DEFD92AB3739E23FABCD4
-:10DDA000AD32C5ABD2C0F4BFF2F98C3C62837A606D
-:10DDB000708DE532E3355164D280CF0305BD5FD26B
-:10DDC000707550CF098CC3ECE952FF28E1F9B2C657
-:10DDD000EB84F7DE90DC5B008F73FBF4B85E93C0DE
-:10DDE00081CC5B86017EAEAD32ACA3CD29E877B5A0
-:10DDF0007A5D2B4E2A84BCE92DC2F22D6F0996EF75
-:10DE0000784BB13CE67563F9BEB71CCB0FBD3558F6
-:10DE1000FEBB7715966D5E1F9627BC75589EF4D68F
-:10DE20006379CADB80E519AF1FCBB3DE462CCF790F
-:10DE30009BB06CF73663A9DACF9EE4EF0C5F5FCF3F
-:10DE4000821C1AC3E5ECE0DA796BEAFA06E5ECB07D
-:10DE50005C8672A6D2B7B8C1C8E521559087BFC20B
-:10DE60003A9C02F2D2437B83C2E530DAFB91DB417C
-:10DE7000DE7AFF08F246C81A94030BC8DDF7903724
-:10DE800002A70829204F7D34F224CAA12A47AA9E5E
-:10DE9000BF21959C03F952E5CA22337F4895ABFB1D
-:10DEA000C14F8CE06FF55624BEFE31FF88047275B9
-:10DEB00040B2E5FCBC82F85C58EFE263D75270AD2B
-:10DEC000D04FF60F8175A46BC8578321BEDF758CC8
-:10DED0000A4156F4F969E5253ADD5DB87F28F35328
-:10DEE000E6F70A6F37C731BA9A75A4888C84F3E5D0
-:10DEF0009C636ECACFB83F5D3D12F6CDF4B94C922B
-:10DF0000008EDF393DC27901194490CE3DD157EDE5
-:10DF10007FEA89FFCC81737F0BE8399D7BDC017D33
-:10DF20000DD3DFA79CB7849C2F798CCE7488837720
-:10DF3000661BECCC7F9824D2914CC2F303958E07DC
-:10DF4000B2BF180CE733F7513904FDEA1A343881AF
-:10DF50005C463E7AB2F73DD17301CC37267A1A0877
-:10DF60009C73517A6E85FB8EB1D2B3273BD9937DDA
-:10DF70003CB181D1F908F74FA3D1593D0FD3E271DC
-:10DF80008B22733E7039267768E85F2AD0BFAFD501
-:10DF900081FD0FEEFD2013CEF1BA765F91408686AB
-:10DFA000BE5FC0CE7BBADFCF17F440FAD3DF336158
-:10DFB0007F7CF08577B15C4B981E6EB494CC55C6CF
-:10DFC00004E1C57A8F20DABC3C8A24CEAB07FDEC95
-:10DFD0004855F5B33513E46937B70361F3EB413EB8
-:10DFE000D5F91D80F951385341A6E93CF2E592BBC1
-:10DFF00084F98D4EC179F7343F4F82814823287EC2
-:10E0000056838124507954DC6B15DCD739DB7C10C6
-:10E01000A7D81BEFACA52CF1D8CEBE1170C07B6287
-:10E020003C6359A3B946F49F126B44FF29A326D43D
-:10E030007FEA3AFC94CD4DF15B9EAEAF39D90BD659
-:10E0400039175FE7D8BAAAE257D594556311E0882B
-:10E05000F5AE7AA988DDC37124CC8C70DEA796CB8F
-:10E06000D30D38CED9C6810930EE59AFA986ADAFF0
-:10E07000F61A366E7A4DE8FA5AB92ABEE6E4A820B6
-:10E080007ED1E0FED0F85189201F99605DA46D0318
-:10E09000A3F78FCA4FF973039EABB7285F80FF6E5B
-:10E0A0001EA2FAEF32D655B89E26BDCF38029EEF9B
-:10E0B00014C6A3EF39D4B371782FBADCC8E494CA7C
-:10E0C0004F3D9C7711BE3F30219FDD14620285D702
-:10E0D000215BEA40AEFC0AD3670F97D32A539BC15A
-:10E0E000ED4072B7825C2F18ABCAB963D607D44E25
-:10E0F0007FFC1705EF9991AF29F49CE0558745A463
-:10E10000C40641D505BB9715C3BAFDF18B37F17D28
-:10E110007A7D0ECCFB3CD115815D3A4FDEB48D0A81
-:10E12000D1D7D30A8B63913AB6CFF1D13F30BFC577
-:10E13000F5E2BE674983582F233352C1DE966D54F2
-:10E14000889FE2BE14F64DEABCA9FD7D57B123724B
-:10E150004B48CD3AD8A73FA6B078CF023B91FB50B1
-:10E160007B5DF5875FE740DCA75D61FEAE7A1EBE92
-:10E170003489ED072B66FA0D2EDAFFA3DDA36EA31B
-:10E180001697BEEF5F87FECF74E2DC4EC2E9BEB0E9
-:10E190004EC4AF27FCB5F8AA7E50D8B93CC723B906
-:10E1A000518A785FEA6B6EE754FD4832D885B84FE4
-:10E1B0009AA6AECA81C2E5C0AFB8AD8614C677E0F4
-:10E1C000A324771ADC21FD0CC17E498631D1FB19CD
-:10E1D000A19F1EFBA5B17E9D85B83F26549E860655
-:10E1E000FB9983F0FAB271C57E557F78F6451F958D
-:10E1F000978ADF3D6A2374DDFC58AE4F75D2E795F0
-:10E20000DBEFB5B9687946F6D9809F1FFBF511EFB2
-:10E21000FBDE6250E9E1B248104FE3F249EA7C18B4
-:10E22000A7F862BB62C773844663C048E5B37AF758
-:10E23000D262321CEBC7597DFDA77AA8378BFCAAA6
-:10E24000F8CDA3A90E764F88C5934800FDDCEA6D92
-:10E25000FF5108EB858774A29C69DF83F12F26A10B
-:10E260005ECF372484B7E3C5E054789FFD7876DF2E
-:10E27000FFA9DE06E5E4D3A0471E8D9C9473BF156D
-:10E28000E805FBFD7C833519EDFDB5E45AD07795A3
-:10E290002EC4CFFCD7DA1D8F0F3F4EF13AB7ED2FCA
-:10E2A000366968A89D60F2D6D5B4F0DF4CBAE8F6BE
-:10E2B000A49DCA63A89F4401E37B8E66EE77B7B046
-:10E2C000B25209D8E03E4EE516C5492591543EAB01
-:10E2D00027703F81BC67F4437C74D9B3AFBC339ED5
-:10E2E000D27FD92E25B9984DC722A506F9E3A17F83
-:10E2F000578D0CF2A3E2F7AF181CC3D8F37B9282C0
-:10E300007C59B66B9F810C0BA7E3A4A67D86364B88
-:10E3100004FE341D2F84F5B676C73F0C1057FC78E9
-:10E32000AF44D2B2C2DF2FDFF20AAE7B4027E42730
-:10E33000E75737FFC2F81698F6F268EC67077BD804
-:10E3400013DFB2613F9782F2FDDCCB708FE97DA3D2
-:10E3500013E850FEDC0A1BCCE7B45CC3E4FCD7F73F
-:10E36000A682BE972BBE543B96EC79F9933F47F9B2
-:10E370005B72F4E7A9E83F1057860E6DB32F03E6F2
-:10E38000B978F3AD38CF32E246392CFFB5BE04EE92
-:10E39000995E9049D1AE087AF21703DBBF9CDE4A42
-:10E3A000994BE7791AF003FBF6A6DEBF1DE3E63FC3
-:10E3B000C37B703FE773A62B21D62F9818BFB618E2
-:10E3C000746A3CD424C8EFB6F5ADC0A7B3FD5C6950
-:10E3D00070EE41E9E0E374932E51B8FAA305698C1D
-:10E3E0004FC421E7F0F7A8BD9F04CFA17FABE23275
-:10E3F0000F17DEE3F6918DBF928F4FF18E83F5EB11
-:10E40000746A64FFEF1F7C7EF4A79584C85988BEA8
-:10E4100033FDDF761FD37755FFFDD38BA0FDF3B718
-:10E42000981EC17BB05E50BC0269D8BE6FA684F650
-:10E4300081EEB323E9F93685EBB9D84E7738B8FECB
-:10E44000AB7242F197A5845079A1E324211F707F1C
-:10E450005CB691BE1FE29779605CEC67083E0F598D
-:10E46000379670BB7048630FC8E69498FCE84AC5BD
-:10E47000FFF413A0BFEF199D3E07E8AF5202F3FF70
-:10E4800064E78177E65039FFA449D55BD1AE6AF5E0
-:10E49000B6FCF9312492DE7E62A1FBAE487A4B9F36
-:10E4A00047D45B4B1BCAF3FF2DBBAAD2AF5D433FE2
-:10E4B000B08F2F3BA2D3516B1F37181C11ED23FDDA
-:10E4C000798BE484CBA12A7FAADC55FCB6AA3FD87D
-:10E4D000A16EF954E5AF5B3E55F9D3CE57A49FB674
-:10E4E000FD0FA0DF14AFDB4D9BA681FF6CEA241863
-:10E4F00087CF9DA9C77B9AA6CF09BBA771473CD6FA
-:10E5000067E9DB7E0F3EE10755B386C13A7F3BF1F9
-:10E5100029ECDCBE5E413FF6EB4B9726D0F9CCE10F
-:10E52000F4BD9D927B2AE547A92C05E2289EB365A0
-:10E53000E24B488278B2444E84E0717BB958879FA1
-:10E5400089A941383DF5FFB67EF7772D8F52BE9EE3
-:10E55000C826E46F50E2FE833AD621F234BD859D91
-:10E560006378464BFE01A8876D7249C83EC263645A
-:10E57000F6E768FE2D63807EB9B3862530391F8C9F
-:10E58000FB450FB7635D3E4702D8F7AE9681B82FC3
-:10E59000EC3ABCD0EA8E60CF0E70397B859FC37495
-:10E5A00058A47A3D95FB0ED2897E8DCF628E189746
-:10E5B0009B6354ED34E71BFDD1D3F14BB91CCEA6C0
-:10E5C000AF268C0CE1DBCCA91FCBB6703EC0CF8947
-:10E5D000907DC5F7A52FC835D0F780B9ADB02442DE
-:10E5E000FCA692D36FE2FE2F0DB0EEE5B7E4CA4071
-:10E5F000C77C8B5E88872C32727D1D4A86025E1333
-:10E60000F72F7D600C9563CF61BDD34CE7E769F9C7
-:10E61000D4E08EB0BFD3D213E0837FB9D5C8FCE578
-:10E62000B79592C540D7B76F65E7BD7F3338AB224A
-:10E63000E1996E66FEE66C527261B4F4D3A36FEE9C
-:10E640002C6B208FD2A3CBC2EE6B87CB1FD3FB2EBC
-:10E65000BBE45F2D811CEA593D99DD6F2E24EE0746
-:10E660002648A8EF3784DAAFDCE6E9CFC27D9AEA24
-:10E6700016C9AEA3EDD5729B01E4D8D3BC4B06BF3F
-:10E68000FD260771E1FE5AAE19363324FE45973D4B
-:10E69000A4D781AFE6CC05FA7E36D348002FD7D079
-:10E6A0004F6DB0FE7FD6320AF520DABC5EF7926974
-:10E6B000F90AC061F64C2B0F85C9F142FDD649A479
-:10E6C0002F9C034F34B6AD7046E05FBE89C959CC6C
-:10E6D000F6CDF4FF997D9B40ED1B936B25D4BE597D
-:10E6E0004C61F62D2D927D5BBEDA910672B17CCF26
-:10E6F00040FC7E6BF96B8B5322D9B757F9BEF735C7
-:10E700007E0FBCA32FB56F2342EC5B5F6ADF22C490
-:10E71000C9BF88D5BE99FE67F4EF55B06F11E66B9F
-:10E720003689F6ADA86535DAB7A2BE7AE1BE1231F8
-:10E7300051FB167F39FB36FFD15BB1AE38E323C8FE
-:10E740000FD015ECDB6BDCCEC13860E76E30B1F872
-:10E7500066AC76AE5FAC76EE7F88CEAA9D5BDE4F70
-:10E7600042FF255C0E999D5B9EC5ECDCF23DCCCE54
-:10E770002DCF66764E6BDFF2C2EC1B7BBF7A087D35
-:10E780001FF78F598FDF01F7094B15A789F62F76F1
-:10E79000A8DF4FD48C09B577379864A47398BD73FC
-:10E7A0007E8ADFC1F464EFFE0AF62E1BEDD820D07E
-:10E7B00023AD7C4C19142FDC677BFBCB53BFFD1DB5
-:10E7C000E8CBEB7ABC2FF4AE8EED8FF67E796A142F
-:10E7D000E8DD4326667F9798183FDBBD3EB4A793DC
-:10E7E00086327DAFBA87D1AF7AB7C4E6BB52EF7736
-:10E7F000C03AF0D545DC3FCFDDC3F6CFB38CAD29B1
-:10E80000F1702FE95F14C2BEFB20C5F343E4A1F40D
-:10E810006205C6019F8FB36D85FD65A94C4CE0C7AD
-:10E82000CE3B3CE563F05FE75DAC43BF771E3C87C2
-:10E8300073127E4F42BD4731A779D72B7D48F8FD33
-:10E84000888946C687892B24FF962CB88F20B6CF9F
-:10E85000D3F8F5EBF83CA93F8B74217FD5478CDFCB
-:10E86000ADD3D2C3C9E65FB5522FD2A3468A480FB3
-:10E87000CAD1E2F9A9C1F9CF7DA16D5D1F685F2AF8
-:10E88000E17E4AA587769E2A7DD4FDCA3CAE239EB2
-:10E89000965D0AF04B3B7F957E61F356E9A9997F1F
-:10E8A0009D6A3FAE26C340DFDED5B91F1803F2F1E3
-:10E8B000674A078AD76DB3B3D342EDF183DC2E4D9F
-:10E8C000751FCF4F7500DDD8778973CA77BD924A1F
-:10E8D000E773B32B6B247C3F7CEB570637C4170ED2
-:10E8E000983BD1BEA9F2F50997F70087F3766F7BC5
-:10E8F0003EAE23CD921DF526A0B15FFCFE98E71E2B
-:10E90000A65707A47FACEB331AE90ACB002954D7EA
-:10E9100021E003FDEFD416C6070FF081FE771AE958
-:10E920003C0474AE4E969C01E8DFBCEB5E909B57B6
-:10E93000CDF439E86FB9E464DF97114B46EA65E539
-:10E94000538E249F189CC809AE8BF3A05F52B8DF8A
-:10E9500031D1D8FA36E03191EAC31612EE87A87C9D
-:10E960001F42FF5C8A74EFA70739FE98CBE7AB40E4
-:10E970006F0BD0B5D300FE8C27C0D60FB5DD233B7F
-:10E98000F2913E2ABD9BE9FA309AD15B17819E37FE
-:10E99000AB754E4F4F8BA4C0FB93E9FEB59704A710
-:10E9A0005B5F1E52E518BE87D3D203E20119217ABC
-:10E9B0000FF629F47CB2BAF928D265CA4AEA5E8514
-:10E9C000D01DECD6E5E8134D2FAA9B7F18BDF84467
-:10E9D000A3177BCD9D7F1901F1AF3D12DA07D292CB
-:10E9E00028ECF7E3CDCCCF386076A3FC76BEA6E06A
-:10E9F000FD73AD1DF99ACB3DEC2F42BFFB9B041379
-:10EA0000013B6737938F543C0630390AB5DFAF9A24
-:10EA1000DDC8AF68F0E3F83A1CCD7F52EB37C2781F
-:10EA2000701FD1218E17E65FF0F84F4FF34AE3E3F2
-:10EA30007ED779759F6792560361F1FF15C6907373
-:10EA4000A9DBF8B940779C2CD8CF6EBA4C3F88BF71
-:10EA500004E8BC5FDDF914C67FCF3F737C1AC8EFB2
-:10EA6000B23FEA8989F2B97DA79504D8BD0B03AC02
-:10EA7000B315BBF511CF5108A965DF39FECE8AF673
-:10EA8000A5E279A3BF98BE5FF1E247C3216ED5BE70
-:10EA900086D919DF335C3E7C6DC3E17CBD4266E7FD
-:10EAA000C25A78D7717939F7527C29D849A9917D12
-:10EAB000BF5AD1344B3186ECD3479A151C97F6C315
-:10EAC0007BCBBE1D12C6CBC3F15BCDE0ED60F6AFD4
-:10EAD000A259F1C377B0158D5B707FEB69FCD40050
-:10EAE0007EDDA4DF3DCBBEAF6DD68BF1C3467DC0CE
-:10EAF00088714EFD71E370A6B792108FAA42BDAC2B
-:10EB00006EE271324DFC68D9EFF6BCE8A3A459F669
-:10EB1000FBDFD8C0DE9C6DDD6EC3F85C238BBFC904
-:10EB20001639727CAEA7B85CD37D3C2E37F534190C
-:10EB30001E1E973B0BFFA17A38DFCCF5558D6B3647
-:10EB4000F68AE9FC7CD9B3179E84F3A473CF7FF2D5
-:10EB500024E05FF9CD674FDE0DE7127BCD7658FFDD
-:10EB60003CCFBC8DF177F5BDBBB99CB7EFF8CDD3E9
-:10EB70004F503D6C7FCF88F7B6DAF79CCE84EF1903
-:10EB8000DB777D990AF1CD957B0A703FB3F2854919
-:10EB90006997BB7F02F2E98FE1FC44CB8F03BBF5A1
-:10EBA00004BEE73C7FCC88FE47779CB5A98AC5AFF9
-:10EBB0001D3CBEBA33F279951A0FACDE7DCBCDD7B2
-:10EBC000C33AB85B713AF0398F0FF614577D8BF268
-:10EBD00075440CFCDBC9E3E74D5323C655CFC37F17
-:10EBE000289F3699C5B8EA85DD8BFFED0968DBDD26
-:10EBF0002B6A5C351003DDD4F3B032B36B9B19F490
-:10EC0000E3F9DF621C1BF8467D72D2FEEC854C886E
-:10EC1000479C513AEFC47BCA7B8C78CFA862CFBBAC
-:10EC2000A82FED2F1CC57326C2CFA3DA49F70F3BDF
-:10EC300037E07B1DCF362B8BC772FA43BCD661C33E
-:10EC4000E73C2ECBE4588DD7468BD3BE6F66F7A139
-:10EC5000D4F3B9AA6D1F188826FE2D8D057E1D17C9
-:10EC6000CE15D5796BE1D9810ED7869E3F448B872F
-:10EC700073BB1AC62F76EED0BE859F47749F3310A4
-:10EC8000D277249C8FB373738F5F7A37127FD5F35B
-:10EC900087B7B5FAE98FEDDCA167BCBF1B5D5E35B8
-:10ECA000B3FDAD4A9F735F47B6D39D5CDFE93AD3AE
-:10ECB00061C67363B6CECCE3EB4C35A51BFBEE8D82
-:10ECC000E17B8EEF03CF3DA3F7C37E795DD301B423
-:10ECD000B75A3DAF262CFEA51D4F8A63FE4175F342
-:10ECE000BEE1608FCEED7F09E5AF7AE771838FC219
-:10ECF00039D4F87B43DBD0A0BC831DF787D8F173F0
-:10ED0000CFED1BCECE4522E769B171F89E1611BE3C
-:10ED100067E7A702FC65BE2683DDD2F3386765D7B7
-:10ED20002C98EFD95685C07DF6B34DFA227F8471B9
-:10ED30003F83756C4C904EEBACEC3B3E7D9201FDFD
-:10ED4000CC95D6B1C7E0FBF195568303F6DBB5ABA6
-:10ED5000D9BDCADAFFE54C07BED426DE86E746F504
-:10ED60001A3ADA93EDB9B00FB7E7978C06B1D2DA59
-:10ED70008344974EC07BA5B528CD6181BC5ECC4F46
-:10ED800021B213BF33D4DB0A8B601E7ABBCE6E8EEA
-:10ED9000B8BE32788A85E5CD50ECE2777FDF210F6F
-:10EDA00006817C1CDF3A0F46A7260F46F98DFFAF80
-:10EDB000E5C1F0C1383F813C18018CEFA879309251
-:10EDC0007FE43C18105F1A1D9207A353930783F347
-:10EDD000F19F7930FE9907034A350FC63B1BCA0ADB
-:10EDE000204F859A07E3CC064F01E4A550F3607CE1
-:10EDF000B56115ABF33C1896FB571784E6C1C8BC48
-:10EE00007F03B6AB79309CF73F52109A0723EFFE91
-:10EE1000CD05A1793066DEBFBD20340F46D9FDCFC8
-:10EE200015087930D6FEA100F260BC1EEF6E8D4B46
-:10EE3000899E07A339CE11531E0C0AE73D84132582
-:10EE40000F86164EB43C1814CE89B831D1F36084C5
-:10EE5000E113250F0685F309C2899207230C9F2829
-:10EE60007930289CCF715E51F26068E144CB8341D8
-:10EE7000E1FC17C2899207430B275A1E0C0AC710E0
-:10EE80009F123D0F46183E51F26050380908274A3C
-:10EE90001E8C307CA2E4C1A070D2114E943C185A52
-:10EEA00038D1F26050385908274A1E0C2D9C6879D9
-:10EEB00030289CABE2C744CF8311864F943C181492
-:10EEC000CE28C4274A1E8C307CA2E4C1A070262024
-:10EED0009C287930B470A2E5C1A0700A705E51F22E
-:10EEE0006068E144CB8341E14C437CA2E4C108C3A8
-:10EEF000274A1E0C0A6716E213250F46183E51F2E8
-:10EF00006050386EC4274A1E0C2D9C687930289CAE
-:10EF1000A508274A1E0C2D9C687930289CE50827F7
-:10EF20004A1E8C307CA2E4C1A070EE463851F260DB
-:10EF300084E1F35DF360980383A481980703F37180
-:10EF400076E7C148FED679307E05F8FE330FC63F1E
-:10EF5000F360FC1879306EB5BAFF1E8FFBC6EF96D2
-:10EF600007E34CBC266F440F79306EB5969C05794B
-:10EF7000FEB679302EC47FBB3C18749C7F5C6E9CBF
-:10EF800068793074966F9707838E235BC65C663E04
-:10EF900051F2602458C4FC213F561E8C63F149385D
-:10EFA0009F6879307E72F926E8360BF669D35114E2
-:10EFB000C94F26FFC4680B8F1BFE50F92760D2395A
-:10EFC0003FA5FC136A1E832605D6C3F739DFDFE1B0
-:10EFD00072F101CF43712C6A1E0AFF548CEF2E157B
-:10EFE000F3504CE17C9CED16E5610A61E72853F291
-:10EFF000B3FCB5B05F2FD7E4A118229ED317BB8F07
-:10F00000E6537064AA539CC7512E0FD34A3F3D0864
-:10F01000ECB9796CE43C1433383FA66BE83285F3E5
-:10F020006D3A2F6F874F73A83C17971F9581AED30A
-:10F030001C6D32C6E96F52F9E710F83793C3D5E279
-:10F040003B83F36FC664C63F2DDE6F01FF28DE6F82
-:10F05000958F42FE69F1D6E2A9E53F09E57748FEC2
-:10F06000905C22E69F986412F34F14D8C5FC1337C6
-:10F07000A68BF927263BC4FC13370D11F34F4C75B3
-:10F080008AF9276E1E2BE69F98EE5AADC97F719FB5
-:10F0900026FFC5439AFC179B34F92FB668F25FEC44
-:10F0A000D0E4BFD8A5C97FF19226FFC53EA1BEB06E
-:10F0B000EE35A1FFE2FAA3427D49C37B42FFA5FEE4
-:10F0C000E342FBB2C68F85F6AAA64F85BAA7F94BD5
-:10F0D000A17F4FF907DEE2DF43BFC3BF873EC6BF54
-:10F0E000877EBF87FC17EF5896AE0BCD7FF1BEC56C
-:10F0F000B30EF2121CB738785E81C8F92DBADBA3C3
-:10F10000E4BF08BEFFEDF35FA424FFF0F9087456D6
-:10F11000F63D606F4B9ECE9AF2DDF311DC5A227EF3
-:10F12000D73DAB54FCAE5B6765DF6BCF768BDF778B
-:10F13000DF5E2E7EDF3D22CE2D011EDAFC17BD2DB7
-:10F140002E9D15EC25CF531080EF74B321DE56842D
-:10F15000E541C87F910DF1B6522C0F43FE0B5AFECC
-:10F1600019F25FD0F208E4BFA0E51B90FF221BF26A
-:10F1700067F878FE8C3A9E3FA39EE7CF68E0F933AC
-:10F18000FC3C7F4623CF9FD1C4F36734F3FC1901C5
-:10F190008473C27B18CB93DE562C4F798F6179C66E
-:10F1A000DB86E559EF192CCF793BB16CF75EC432A1
-:10F1B000D6FC19AA5C7E087EC315303E9367554E77
-:10F1C000AF7EE09175A1F933463CB009E5345ADED3
-:10F1D0008C1CF8A62F257ADE8CEEF628793382EF88
-:10F1E00047CF9B9136FAC7CB9B31D7F2C3E4CD987A
-:10F1F0005B23E67598B7EAF2793346C495DC82F270
-:10F20000C7E571AE25B6BC193EABC4BFCBA7740130
-:10F21000BF8BD205D7EB1EF20E1CB43E3D04F61395
-:10F220005D43AEBA6CBE07AD5C44A737CBEF30E7A9
-:10F2300047CE97D1135DD5FEEF57B03C0E732DDF4F
-:10F24000325F460FF9160E667F817632D67C193D05
-:10F25000AD0F3DD173C68F9C2FA327BBDA933D7DA5
-:10F26000730AA373EF1EE8AC7E2F5D696A3D842F9D
-:10F27000DB5DA8DA32FF1E3E77A61DE3331D3BF9A6
-:10F28000BD381771D853D9F7FAE06F763C9F309CA0
-:10F29000E077FC76E2A2FC89E7CFA59DFBF6C1BD35
-:10F2A00080B536E24A4C02678F38F403611F768DD1
-:10F2B00009E23555BB3F7DE38F14AEB9458FF7E5C5
-:10F2C0003A280EADE8F7B912816FF1E497B84F878D
-:10F2D00033BA4BBD42BFEBD6FC1E0EE8921A3C7F00
-:10F2E0002AD05B70DFD4B599DD67D593AB1E9F90B4
-:10F2F0008CF7C689DF81FC433F7519C7B38B106754
-:10F3000000FAEFB4E2FDD525AF2D34C0A070DE1AAF
-:10F310001A37E85524C6811ACCB6E1706F2F5DBD4F
-:10F32000BFE773B5821FBE88C34D2911E3449F2CEC
-:10F33000283A0CFEF3227719DEAB482B15E34684FE
-:10F340007F470FDB32F03365C2EF75FAD97DCFB05E
-:10F35000EFEA9BB7209E4BFD9AFB4B8D625DA5DBD0
-:10F36000392BBF9762219698E8D636F8F109A3BFEA
-:10F370003DDD8CE922DDCC0E916EF14344BA68E9A3
-:10F3800066758A74D1D22D61AC185F53E9A6DEA7E9
-:10F39000FCA1E89664E3F73C82F42A31A5A2C947B0
-:10F3A0003C33E400CAB7561FFA5802F01B7E48BF30
-:10F3B00064FF6A7CCB6995C16EA533D0445AC4DE24
-:10F3C0008B077D80FCBDC489FAA0FE3E8A78F221BD
-:10F3D00097FB8FC8255AAE987EF0F802DABA19E486
-:10F3E0006D04FB3D1A18AF4A22B89F5388D30EFB19
-:10F3F000A826AFC9B94881734DE25C940DE79976B0
-:10F400002C1FE4DF3B770C25B8EF6F0A7C9E0AF7D0
-:10F41000061E1CD9390DE20F9EC5A404D6AF5909AA
-:10F420006C7D5DC64B5B028BCF6C28D111D768F821
-:10F430007D4A7ABF44C76BB7BB5EBB01FCD1167671
-:10F440003F80D83BDFB81DDB47E1F7E119BAFA6B23
-:10F45000001FDA1FBF2BEE68F9C8B630C40EB737ED
-:10F460003F7225DC6BDDA48BFC3D73818DFFFE1D9F
-:10F470007E3F654430DF42816D0CE6657870001D8B
-:10F48000A77A7A17F25195CBEB38FD0F964D41FCD8
-:10F490005E68911C10AF2BD4DF71D3308ADFB8B710
-:10F4A000657EAF97DD5F1FCDFBD79AA9FEA2FDAAAF
-:10F4B000FF1BFC9E95974ECA980F71744D19DE1371
-:10F4C000FCA3ADF030F02BC7D5340AE429BF2511D9
-:10F4D000CF713D1F12277E9AD52ADE07CCE1F7B601
-:10F4E00073DA881F84E2DA6362FBB836B17E9D6608
-:10F4F000FF39DFC6F5D4465241EE367EAD9760FD4A
-:10F50000E8E824CE3514DF8E45BD71FC8ECF09FAB4
-:10F51000891D5FEB8B22DD8F596E63FCDB642068F5
-:10F52000BF379559F0DEF9FEB28AFEE05F7C719735
-:10F53000BB7FA43865889F96C0BEBB772590B1205D
-:10F54000876B2546EFFA8C9208EB962A77AA1CAABD
-:10F55000F2975116E78E740FF5339B8472965736E7
-:10F56000443280FCEC9530FCD5BE86E2759975DBA3
-:10F5700047D6F4017C3CCD9FE17D32538BE48A7405
-:10F580004FE7619B8DDD6F5CE35B0DF7467E419538
-:10F5900008EC5486A13E2B127C1FD9887EE95D368B
-:10F5A000077BCFC4F320C9F519709FA2BD79D2E4BF
-:10F5B0007514CF27A83EC07AB5497122DEBE2A4213
-:10F5C000F09E2C8FD7F59D46B66C08F17F37DB7225
-:10F5D0001B6D145EA38D7D6FD9CBED94006FE77F1B
-:10F5E000FDC306F03B2E1A917FBDB9BFA9BE77803F
-:10F5F000D3675C826B2BBC4FE0979F51E3E374DBD6
-:10F600009C8B46415C9ED23BC40E06F9E663F951E1
-:10F61000DC04CF3F922C3A9443E27239ECC27D76FF
-:10F620001FEA8DAA07242011C853A0DA37A9450A7A
-:10F6300058A9DC8F365902708F2EA99CCE3B19F247
-:10F640009A9818BC56F99C18D7A2F29803CE3DC1DF
-:10F65000ABF3104805F8AADD53EDE5DA44668FD622
-:10F660003E24635ED4CD729B19E2A9592E471EA495
-:10F67000884C921D78AFA65F3971520C49FCC05F6F
-:10F680002776FB0154C9AFF9463F2FD2775B176D40
-:10F69000CCDF1E97E0FE33D06BF8E1CEFDE02E38D4
-:10F6A000CDA417BBFFC5ED04F76B0AF97A37EE3F1F
-:10F6B00074EC7BD1C00D24F43B2AAD9DD86466EB7D
-:10F6C000FCB8EBD9BA37EEBC05D7BD6E3B515688B6
-:10F6D000EBD4C8965107E09EC5C80F997E126E1FE5
-:10F6E000ECF40FD029E7B04F0FF4F9B67641CB6FA9
-:10F6F000123075D787EAE01C86EA5BC8FB6735766F
-:10F7000064C5F441B5185EE672D4FF1EA7DE1D4243
-:10F7100047EDFBDD714AC9D4FDDC3110ECC8113D69
-:10F72000DC0BE9C8A5F3A3F3DFC8F525F173FF648B
-:10F7300098D7C6961BCD20DF6B0379F662FA4EA2EE
-:10F74000A9049997485C18CF19493D32C88F518B4D
-:10F750004241FD41A58424A4C03DB42221DE432CB6
-:10F76000493CFF4B00F9D22DA7548E43EFE5AAF296
-:10F77000A99547557E6BE1A005CE0721624E4BBD92
-:10F78000D484878146B2D90EEBBBEA5FD6727FAED6
-:10F79000D69CE9C7EF977C19E81FADE4FE51ADA5F3
-:10F7A000D084E6605F32AEEB2B217E42E9B0328539
-:10F7B000D979753E5AB9F45CD4137FC83EC123771A
-:10F7C000E27D44CF45033E5FA7B807C0FC55FA5C15
-:10F7D000C3E9A3A58794C0F79D9C2E3DE39B638757
-:10F7E0007BC1892617598FF8E6E13DEEA6C0481384
-:10F7F000ACBFF76AF08D01CF6B13C684E3295BA21F
-:10F80000E099CCF0BC8EB8FFD846E53767455D6D12
-:10F810003CEA15792B3D275CAFB47AA4EA8D1AE750
-:10F82000BDB6B2FE005EBBED416F3CF18C2E4EA525
-:10F8300004EF5739F7C4A31DD1EAD3E77CFE9E78C5
-:10F8400046BF058A7B06CCCFA3EBCC043919EE204A
-:10F85000BD8A2992C39BF5A8E7A435B67BF8AA7F99
-:10F86000A5FA55DA7EAA5FA5DA63F51EFCDA04F77D
-:10F870007C9003A999CA2DC5A7D6CEF64B9B6DEEF9
-:10F880004580573CC53D0EF68D430259ECFB5F5158
-:10F890002FA2E941BC46CE9B0232AE0B3EBA2E648B
-:10F8A0004BE178A8E30F4A48647CA45A0EEB7DDF55
-:10F8B0001CC206AB269837A7EF70E28675ABEF48FF
-:10F8C000769F714D02B3BFB5096CDD52CBCDB692B8
-:10F8D000BB51BF65E2338EFCEE7803AA70DF7C6D0E
-:10F8E00082EB2EA087A9C885F3E863274EF04BFB77
-:10F8F000C84D127C379A54E990D83D7312FC7E8B28
-:10F90000C2EB53ECC8057DED03FB6BE8DF1239CF8A
-:10F91000D8A309EAFD5EE67F3A49771EAF47139800
-:10F92000FF7908529FF42A56F382A9E7394E09E875
-:10F93000D46EBD0D916EBF20313F3D91D14BBB4F79
-:10F9400000C287FEFEBD7B0D44362791E0EF59D5FE
-:10F9500099D0BF8F27CE26B057BB1206F0734C67E5
-:10F960001DD47F25779A128706E55D95E30727CC9E
-:10F9700070422A52DBF55DC3614F45E57A27D0BF5F
-:10F980007D42D760CC41493A3399FCB8F442BE205D
-:10F99000950FCD8AC00733ECC343EDA4D53004FCEA
-:10F9A000D17629CE09F72CDA974A0C5FC9C4F3291E
-:10F9B000C9C23CD3E3997FDDC1EDD53B0959282766
-:10F9C000AA3DA6F3AB83523B0F8F11EF7490CE3D4F
-:10F9D000F1FEAD706EA5C93FA9CD4F3969A105EF04
-:10F9E0007F6CDC63C6FD6B57093BC7EF6A31A27DB4
-:10F9F0008EA6B7696DE688711CB5A4F47B0BE897F9
-:10FA0000A6D424823D4C9B7BD2067CD7D2A543F260
-:10FA10005D7308F645AF2B11BFBB55CBF4F49B12B9
-:10FA200017D1FEE91993B1549F3758E488F7CD4FA9
-:10FA300073BD52E5F14A3A22DF0F9D06793CEF7E15
-:10FA4000F31D1709DEDF6F8863746C886374EC72D2
-:10FA50008F4F781AE4CD9781FAB0583D07E5FB7FC8
-:10FA600035CF943ADE46AF2951A62AD0B0608A1924
-:10FA7000D68914E29A3C1B9475A342E03BA2C7BC12
-:10FA80003B12F3318E6D12EFF9DAD9BDE1CF3716A3
-:10FA9000E077DEA9648D7930A5475989CE09F183D5
-:10FAA000F30BDEB7E9A83C2DE8D39A03F2FBBAE2E8
-:10FAB00026F63118EAC2FDC99252833F40F996DC1E
-:10FAC000400D05A5CB7F03F4A15473008000000016
-:10FAD0001F8B080000000000000BB57D0B7854D58B
-:10FAE000B5F03E73CE3C92992433794E1EC009E1A5
-:10FAF0009D108724BC1F4E9E448830BC0485EA803C
-:10FB000028CF2488D6DFB6DECBC444F4A2B745E9BB
-:10FB1000AFF4D6DB7FB0A2A8200182069AA41340DE
-:10FB2000E4113408A8A8AD5129620BC908EAC5D66A
-:10FB30007BFDD75A7B9FCCCC4922D8DE4E3EBFED11
-:10FB40003E8FBDD75EEFB5F6DA872EC977134B64CB
-:10FB5000CCB7D8C0B64A8C7D87BF1B43ADD96E6089
-:10FB60002C89B196383BB54EE70CC7D284F07E8520
-:10FB700063693E63D5D6D85C16876D7F3F8B85F170
-:10FB80008A58EAD202685BACAE5A95B12546AFDD21
-:10FB90000ECF774EBA3CA48EE12FD8DF3392B12E30
-:10FBA000236B94E2B01F606C0C4350F8CFED56ED20
-:10FBB000D097F0FFE1FD448B2D20C3B8CCA35CECC3
-:10FBC000B0F047BE1B281E4D66CC285E939ADEF827
-:10FBD00046CA652C7672116370DFCA5C8FB22CB88E
-:10FBE000318CA99E18C6A2D833F6F3D98C19F07DB2
-:10FBF000584757F3BBFD7C00C71FFEE54A0C83FB4B
-:10FC00001F29C118570E63171E3C15E3B6C1F5072F
-:10FC1000E5723FF46F4740C687F0926F870BA319D8
-:10FC20007BC4EE1981EBBA63DD7F8FF1DA42F7D93D
-:10FC300003703195B1157E19E7E6F0C27FABB65976
-:10FC400019B384FA95F509117DC018E1B5D2CCD667
-:10FC5000D4DB7AD26305D203E65DB17D8B295DC525
-:10FC6000F9BD93ECD0BFA0C0AB80EF0B0D317E5F30
-:10FC700066089E25DB4799D2E1D6474D661680750A
-:10FC800030A5DDC86C84B50A09F0E61578D3C379D0
-:10FC9000B8C54AE3DDF57F65BF1996BA18E67A2044
-:10FCA0001E9E6F5A51C1727BAEE3AE3FA8652940DC
-:10FCB000BCBBFE4D623E953FFF601E3CFFC0235F14
-:10FCC00020DDF4EB5CEC337ED211B16E376300CFF4
-:10FCD0003241EF3B1F8DBCBFACE9311A6729F39A63
-:10FCE000909E776DD4DFBFE933E4BB654C095D07B7
-:10FCF0003C5C3E9265453CDC618F493C0F20038FA4
-:10FD00008DFD0EDEDF7D64609C37A7277EB5F6E2B1
-:10FD10003AE06F33637F5E67A1F6C23A46ED08BBF7
-:10FD20004AF459DD74F27EE4AFAAC65D261CA7C56D
-:10FD3000FFA78409F04861D3373232572173DF7B44
-:10FD40000EF0F92326B3EF007FBB19E79FF546CFEE
-:10FD50003D48AF1BAF96D37DFDFA1769FC7F249E0B
-:10FD6000F86711AE3B17AF2B5FF6B6AE9FE2BA80D5
-:10FD70009FD95858977CFDEBD2D6A3AD4FBB5F29D6
-:10FD800003DFF5F2BEC6EF23843E58FADCACF5691A
-:10FD9000808ADAE6CFFA77103FB1D328BF1A3F2D19
-:10FDA0001374D2F38D46C76EFE68FA775A9F463FAA
-:10FDB000E07FA7C1896DC06918D7934FF47CA1E794
-:10FDC000834E63477F945F3D1F744A6C416FEBFA2B
-:10FDD00037FB405AD752D55D6687FB7731CF7A3BE8
-:10FDE000AD67235DBFA06C3CFC3394ABE7385F7715
-:10FDF000EB3933973776DCE847BDB936464D71D8D5
-:10FE000004FD80CE9DBBCC3E7C4E9BE7FC3AB77B8D
-:10FE10009011F15E4EED9FD779DC830687EEDFFD12
-:10FE2000AB2BB12ABCDF358C95A3DC77C644C2BBB3
-:10FE3000CF2E133CFB900EC87F4AFBFF7C803AE933
-:10FE4000B9F631A847CF7FFB5FB11E78BEEB5B737D
-:10FE5000796FEB3C2DE807EAE5B413F8EC762167FF
-:10FE6000B73755125D963C33CB84FCCC1EE0F8B41A
-:10FE7000C01FEAD7B6A8D867711D8B1B24D2237A7E
-:10FE80007ADCE59AFA39EADB3BFD85F47E0FFAB0BD
-:10FE9000C789BE77213D8685E831D6A1727854F8AE
-:10FEA00003BEB943F0CD79658DC9007AE4FC338097
-:10FEB0006F007995C2DCBDE9C1FE0ECE877DAD47EE
-:10FEC000BF8EBEE05FF65CCDFA3486EB1F654AEB71
-:10FED00045EF68EBBF8BB96249EF88F5B28E1B49DD
-:10FEE0005EAB2D7C5E6D9D2B9AEE9C817C51B5198D
-:10FEF000E895D973DDA87717F7026F997CD16881EF
-:10FF0000F7BA1E905CA86FFBA283A627EE12F85AE0
-:10FF1000B96DF10C349A8B613E3913F5D1176FC668
-:10FF200024A25C415FFA1E7A35C91F9B711D8CE3C8
-:10FF30007B09E07B8374FDF45BB6B9D03D28ECB956
-:10FF400015FE9BDC83C2F5998EAE6CDBACD0F364FE
-:10FF5000B7DD26B4C7F10EA1BF845EEE5BBE60E1E3
-:10FF600000E7DA1D0EB26F6C8D83F46375D3165300
-:10FF7000B8DDD5E44B93B7B10E3BF15955E313F41B
-:10FF80001CE85FD501FD4A4BC7CF6F55C3F0394E12
-:10FF9000D051AE30A1FEEE4B7F82BEF9B2236C9DF4
-:10FFA000231CC2AE08FD7B2DFDA0C1AD1F57D3079A
-:10FFB0001ADC1ADF6BEBD1F37D5FF0E9E9C2989FA1
-:10FFC000FB0B3AFAAC427A84F5115E05F0DBD66C95
-:10FFD000F53F04F0B6491C7E5F7314C1DFE92C764F
-:10FFE0009F033FAF2A7521B527F0C554F4EB3CD3EE
-:10FFF000109F9A3FC70A1222FC247DABF93779C2C1
-:020000022000DC
-:100000009FDA1BE5CE0713093F4F02F2C3949A8E85
-:10001000391620D9AD8EEDE50A8C3FE5898E395130
-:10002000D05FE8D8C1FB5B3B4E595C8CD5B057CA5A
-:100030004BA07F3BA013C7BB565B60F62C44F95D19
-:100040000D7E9205ECD1EAD3430EA1DCAD6EAF2854
-:1000500097C0EEAC068323813DAA74C706ACB9D421
-:100060006713E0B9E7EDDE65C42F57EBC86EAD3E10
-:10007000AD70B9399248EB5700F62878AF2E1AFCCC
-:1000800055C0575DBCC5559B49D77D51F1D877AB5D
-:100090006AD8758D1EF81EC25167606E07B4AD47F1
-:1000A00087C4757C8FDD6E5DC72A14E08383EB2CDB
-:1000B000D4EAEF179AEC83D0EE151A98B7377DF98A
-:1000C000A483FB8DC0E4E948E7AA23269277FCA12C
-:1000D0001F5829F4511510280EE0A93CCD02D1B1CA
-:1000E000F85CD9E70AB60D12FB24C25F61A1BEDC41
-:1000F00037DCD7DB56E17883C3F984E3A948912A3A
-:1001000094B0794B6C51117D39C5300CD7C3E4687C
-:10011000D756C0AF9C6E58B31BD62F0F8016F0A1D8
-:10012000D85DF2626837164F9197405B6BE476B505
-:10013000D6C09687E3E905811FADFDC0E1D98A7479
-:10014000BFF456FB182BE9AB0C3BC9B9586FADE4B3
-:100150000A50DCD4CA5C5BE15A9DEC619C8FEB19C0
-:10016000F2F11B621C97D9B047057E6D747C40FC90
-:10017000EB8A33DC9B09FDC0131FF17EBAE14A26EE
-:10018000F0F781273ACA15900757B6E1CA40E81F31
-:100190007AE2637E7F220C0906EAF0139F94FB6CDF
-:1001A000382ED7676CBB3B1BE7510C12C9A972C034
-:1001B000E4AF85FFAD8BE5FC54073C82FCF786B0CD
-:1001C000B3EB6B8A5EB602FF2B456E750D8CE3C7F1
-:1001D0008069F4DFDF6A7894AD068A53B0457CBF4E
-:1001E00029D6ADD18135B8B367A15EA87767CF8E28
-:1001F00041BC7A4F225EF3DBDAA7A03E6E78FBFDAE
-:1002000031E8AF22BD709CFC3688DD603D975EEB27
-:10021000B7450E8B473F7014BEE3003996DCDC9F78
-:1002200094543B5B047257EB66AA09D695A28BEBFC
-:100230001A18D72FCFDB3D7FC4F7584680EC4DA16D
-:10024000C3FB31CEAF8F57597B7CAF7A59AFB74CD8
-:10025000B90FC8E8E7C4A737BEB704F5FBEFCDAECA
-:10026000C12AC2E5660F003C3B0D4C61F1C426C3B8
-:1002700094028C3FA35D1B50EE5DCCE90339C33083
-:100280008D80845FE298B0B855AC07DE2F61D08EC8
-:1002900045F86EA0F5C9C857A3984746FD3586F9BD
-:1002A000ADD87635BFE644BC3D19C5EE40BFCFB2F0
-:1002B0008DB9FD61FA63403CF7F726251809EE6811
-:1002C00063FD6CE4D7E82F981DFDAAAEFF342938F2
-:1002D0003E08C874BCEE3A6C6008E70B46BF3D0EA2
-:1002E000FAC1E18AFA2C0B8DD725E8AD8DFBA44924
-:1002F0001DEE407D93C0FB2F1472FB1CFCDCE47FE1
-:100300003613F16359E30F932F673CF75BBD494503
-:10031000F1F1D0D63747339C7F6C4BB401E9F0F252
-:10032000F6BC28E4879D881B587FBCD97E0F8E17AA
-:100330007F05E0CDA4EB6EC2ABA28E8A03BC4E98C3
-:1003400066533700DE5F88AA9F86FC1FDC6160CFA2
-:10035000C2143B4DAE59D8DF7959B5A3BE7D21B348
-:100360003E9AD6B3C340EBD9191D1CB116E0DE305E
-:100370004C2947F8142B53500F2B8622F51EB83EFC
-:10038000349EDB574D2F2F88E7F2F3A404F3E7E107
-:100390007385243FA5B28DE4AE2BC8FC669827690F
-:1003A0006EBB8CF4889E05AC847CAF046406FD496A
-:1003B0001E46498D4936A35F257DEBB62D06BA4F03
-:1003C00011FA76CA87AB2B78DCE33A3D11C63B685D
-:1003D00033325CD764D621A33F38F92A7305907F66
-:1003E000AEF278C60E7FE83F3DAFF3074BC578EE1F
-:1003F000A0BD042F17B2483FAE7473D9E712CDA346
-:100400002A68A78B2DBAFBE8E7C5621B193795C58B
-:100410000BFFA63FEBFF1DE937E05E98EF3E3B9FE9
-:10042000AF54CEF915AEAFABDCE4423CECB2B9DF71
-:100430009D887AB1DDC8B6B2BEE5E979883FFDE0B6
-:10044000730CBB6A65FE7CE2471BAE67C4E68DBEDB
-:100450002858F788417C7CE43BD42343FF333101A7
-:10046000F5F855A15FB456E333E4277B1CE727FB7F
-:100470000D2139BC333E939ED3E40AF90CC7D96FE2
-:10048000F42FF4F46227813FEF44FEDC65631447E8
-:100490003D966A598072A5CDF3BCE0637DBBBE6614
-:1004A0006DAB11D7FD15D80380BB24EDAA29DC9EC6
-:1004B000EF49E27C552A7F4BFE766793C4D0CF4F3D
-:1004C0006EE2FA3B9C3F527BE78F5F225EAFC51F17
-:1004D0005ABCB0FB87F2C791BF8F3F365C933FBEDB
-:1004E0008D453CDCD75C9CC2BEC7BF6914FCD0D72D
-:1004F000FDF156AEE7F4D75F1178DD67DA383D17C6
-:10050000F5C0CD0617CA39503F7D36AC635F347FE6
-:100510008F296BB2B0BF4BE17A65579399F4CA2E1D
-:100520009BD74B76DC6961E83F30C5DBF133D4877C
-:100530006916754318FF2E8DE7FC566F0C8CFF0C67
-:10054000FDE2A39CCEE36ECE934DF05CEA522EE723
-:1005500005174C5B300E2B4D28DC817C7402751620
-:10056000B4D5E7E029407CD53913E9BBD75A4E967C
-:10057000617E11FC1E37F2D9D8FD27CB8A72F07943
-:10058000AE4FF78A56EB8FC735C5B3EE78D723EC5D
-:10059000C678C6F59207F92437D4676E23C56B1A5F
-:1005A0003FD447033F805CCC67AA3116869C73CE4C
-:1005B000F330984336A73C92CEF303D3283E9C7B7E
-:1005C000BAFD55D0CC6C9E47775FF0C17C1D1F8073
-:1005D0009D3D1E8FFED2F180C980F399D664737F52
-:1005E000684D16F293264FF4033CD5FF61D8B31B38
-:1005F000C2EC7B6C0297A3C75D0ADDF77598FC839C
-:10060000E1D2BF33FE5EBDB03F9FA33C63FC70DF11
-:100610002B0BD18EE62F771F44FC4F4F92E9FA2F18
-:1006200058C09285F47129E497D51BD5E2CFA4D0A8
-:10063000734CF10CB3C1FDFD49D1F9387F6982F7E4
-:1006400022D28929C123F8DED80979F9285FB65169
-:100650007509688F34B801AEF2ADB6101C1A5C672C
-:10066000055F94262CBE88EBC7F750BF347E7CDE36
-:1006700082EF6B74AF6FFE82D33B8CFE48EF10FDB0
-:10068000A53BB0AFE1E12BA157B4FE3F4A7F2D7FE0
-:10069000704DFA637E20F6EFA2BF352129447FF02A
-:1006A000B3E2B1AFF7B3EA4DE077E7F4BC5EE82818
-:1006B000A4E75D265821FA552D1077A23C7A1DB487
-:1006C0002FB0C7CEE7EAFAC3F9FEE022B2C109F1C2
-:1006D00084F76A537008FA21A30212F985A340F047
-:1006E0001791FF95417ACF25F0C4CE4BD2F961DC4A
-:1006F00045FF2E1DFDC34002FA51A3CC1501E4F7BE
-:10070000DDD629E9E8D7E5592765215FBD3AECBE7A
-:10071000E368825E4D5BBEE73935E4FF68FAEDA021
-:1007200018569BBF2081EBA11B41DDA21F882E63C1
-:10073000381C9A3E47F2201C5260BEE13B2BE9E593
-:10074000A60EA0C78D0807E0A155620DA8CF0B0D1E
-:10075000EEC462F4D392020AF7F7BEE98FF9C18AB8
-:10076000A637DE43782B703F04E35097F162773E63
-:1007700062604F3F58F357B4B840F367B4F813FDC5
-:100780001EBC3F405CB79B0140B447018BBF06E6EF
-:100790007FF2B23ADC2DE4568175548875CC64ED55
-:1007A0000417FBF6BBEF26017D66087C541C81B85C
-:1007B0003117EF337633E0E16685C79337BB207E90
-:1007C0000CE3A399E322FBF89B921C1AE75ACFEBA8
-:1007D000EDC044DDFECC3FDA1E017BF409B8CEC784
-:1007E000D6F1B874C240D9A7A0E11C9769407EAC8D
-:1007F00016F60DC2E85EEDD24BC22F9E60E8C875BA
-:10080000017E5BF7FF8DECE081FD7F7B07FDBCF196
-:100810009F2BCC0CEF4FF8BC200EF5041BA7125FEA
-:1008200069E356FFA9C1CAF875E2FF2AB1F6C30011
-:100830008F7B28C267A1F677179FDC84E37D794E12
-:10084000E1BC2DE62F337907611EBBCCC4F30187D1
-:1008500025EEFF68F70F1B016EB8BE2941CB0BB424
-:1008600093DDC79F398CCE37633E202F44D79B2F13
-:10087000947FAEE4F6A40FFEFE37F2015A1E60AB81
-:10088000C01F3B78D6A4025C531BEE51D0BF9EEA3A
-:1008900094993B6CDE9B542B7387E5039E49D0F9FA
-:1008A00023075FDC3403EC49759BEC8A42796DDAEF
-:1008B000753C17FBEDB2CBDA0B1FE9F13BB5E91E36
-:1008C00005F9DF98A8927C5F6BFE0923804F6E408C
-:1008D000BA33F2EB3AC74824477AFA1ED8FFEB84C2
-:1008E0008E9CBEF1DD17FDF574F8DDC522DAEFB997
-:1008F000163DF47CDB02EBF4C1FA02B04E1FF85D4A
-:1009000007D6D9A97F689D93FA1ABF5637FF3601DB
-:10091000FD368D4F4B1338DF8CDFB72981D942F478
-:10092000D2F0F5A1B0577BA3347FC3356F065C3A94
-:1009300005768718D4C7DA9D6342F66BFEE932F27A
-:100940003734FB355F5E544A6A53D82F4C23A35E7D
-:10095000D3DBA9B9EA6223EBCD3E2D88EC97B76DC6
-:100960005462A867203A4992C087F0B33538CE3038
-:100970000FC1A9A7A706971E1E6D7D9A7F3D5FD068
-:100980006FCEA04C23C2DFC3AE8A75E2409887B811
-:100990005EBBFAB58E9FAF5C28792BB717BEED8B87
-:1009A0007FF5F7357D508613E451EB43BFC298982D
-:1009B0004C742BBB6A626EB01B2C238A7D1A66575F
-:1009C00058C550E29F7B851DEE8B7FAAAECACC9B9B
-:1009D0001FE22363E31356E4A37DCA462BE62727D1
-:1009E000DB66D5C6019E4AFE543417FDBCEA0E03F1
-:1009F000C3145669D3170731AEAF7E8FB9502F1687
-:100A000035B51623DF1D52DA658AB3BF64EC893031
-:100A10007FB1B1A9D68AFE5463A24C71FC6107E78D
-:100A20004BEDFE9644AE3F1ACF5D9EE1EEE5FE191A
-:100A300071BFE4E33CE2A3B24741AE310E4D8AA15F
-:100A4000BC4489649F53817EC84D46F2F3218EF9E0
-:100A500023EE035E6A34EFC2D47E69E323F7D881C4
-:100A600010F5FFFD698D19F30BB324D7B3F05C9932
-:100A70001A6CC57ED9DC4CAA7B18FB3F32F9B3C196
-:100A80005B25CA8B9401BB60BF6C51A61FF313FB9F
-:100A900025DEF735F37D0266F725CC8079DEAE489A
-:100AA00018B581784AEB0FCEDBC0042387C557F712
-:100AB000ED9549CFDC572AF971BFA9D49ECE7C6150
-:100AC0007C55F6A889D635BB29A508F9784EB9CC4E
-:100AD000FC61FC1D107EE13C0FC4E161EF1D8EE264
-:100AE00070051703DC52486EA7093E9FC5B89F38B2
-:100AF0007F4142C47BF0C62D688F6E6D8238157AB7
-:100B0000D344FC7AAB373D625E0FE37ECD09162CF1
-:100B10008983F1FB250D24FE9B11B48F0EA8A877C5
-:100B2000CE24A25E63C3B89C6872572AAFAE237E00
-:100B300070F27DB2791248938CFA2F529E668E8B9A
-:100B4000ECCF72F7A83788907FBD5ED7E47E5EB3A6
-:100B50004CFB72F30A2517EB453FE8FDECB1D17D64
-:100B6000E8856FD587E37AD30B1F96FF5D7AE13571
-:100B7000082BC681FCFE3451E8877EAC1FEA875201
-:100B800079FB26E4972EB077E65EF845B3175A3C1A
-:100B90005E06F24AF27E91EF67945E4D65BEFC50B0
-:100BA0003CDEAD2FC09F70F5E2E73C9D984572D4C6
-:100BB000AD5F34FD11E64F18C7FCE3FE4429F89100
-:100BC000A63C842F83E02B633C1F5886854398976F
-:100BD000737E41F9966A88F329DE67BF25B850CF46
-:100BE00049F12139D0FB195A5ED72AF2087ABEE8BA
-:100BF000CEF3CD35521D8CC61765762E1F657365F5
-:100C0000CABBEBF9449B4FCF1F015D5EE69AFC2106
-:100C1000E4EC87F24773A2D8571DC4065D0F5F68E6
-:100C2000FCA0F187DE8E1CD3E567FAB2236FA21D0C
-:100C300019DDB71D797D9891F4B5DE7E68F6E2770F
-:100C4000495C2F6724F27D8E69C3E7D9D0EFB026C7
-:100C5000F13A0DCD0E75E79736737E78BD63892224
-:100C6000A13D41BD9019867F916FD5F8AFEA5189BA
-:100C7000F28D15422F7536F3FC5B7589ECB7C0FF1A
-:100C800016373DB189F78D949F2B545A150B8C3B29
-:100C9000D325B930AFE316F9BA196E89E7EB5C9149
-:100CA000FBF42D3AFACE117C349305EBD01FD7EB31
-:100CB000A53957B95FA0D74F73C4BEFB1CDDBEFB7F
-:100CC000554DDE07B001FF4C7FC09CF4FDFE80F661
-:100CD000BE46478D7E2AEEC5A11C1DFCC6A4C6706B
-:100CE000FF19E937F5AA42E3D893045F0A7FE6CB00
-:100CF0008B79BFA0984F3C5FDDF485C93BB26FF89C
-:100D0000AFE5B7C6A29F3E3AE4B76BF34E53184B1C
-:100D100047C74C674F6689EB3FD47E0CD7AD43A3E2
-:100D200083A6477BE059E8D9BEE8742D3DABE9B313
-:100D30007FB69ED5C6D7EC8036AF5EFFF615B76995
-:100D4000FA74FD1603E54B268BF878B2C8C3CE4F74
-:100D5000E2F1C1AD493CEEECFACA62407BB9B38521
-:100D6000FB272EB3FD38FA05A17C1FA7E7C331CCC2
-:100D700087FBEC4C69B7D0BE67119012F73DD3F8F2
-:100D8000BEE77625E0213DED52580DC8C9397C0FEC
-:100D9000E679F8806F21EAE9873F1962A0FD77259F
-:100DA000D08EFEC9D83C85F68F1C6695F2C19DCDCC
-:100DB000663BBED7B5EFFFB41A719CAF980B43B832
-:100DC00043CDE6EEFD1BD407A5729B8CF9FBAE204C
-:100DD000C8083C3F6941A018E3A0C9ACBD16E57B3B
-:100DE00002D2B117FAFD2A498BB37BCFEF173773C5
-:100DF0003FAE3846263F6E8AAFBD18F7ADA62892A3
-:100E0000AB169FD5E5F75FD1C51FA1FCBEAAF0FACE
-:100E1000435DFEBE91EB99EBCDEB4F40DD067CBC14
-:100E20005EE373A16F581FF9FD9D26BEEF133C6969
-:100E300064E807B30B89BDE663AE95E7DFD712ED33
-:100E40005663719F8EFBEBFB5AD2DC6A6EDFCFE7F5
-:100E500076048BD03CEEDC3E5BA1FA35911FEDB100
-:100E60007FD2C7FE88BBD17E08D5695FFB21C55FF5
-:100E7000AA94F6B95EBC69750B4CD43FDDC8B49F2B
-:100E80009BE474E7F96837F2F9CEF3696E84EB7985
-:100E9000C1A71ADFEF3B77399AF6414D6E15F78FF0
-:100EA000830E8BEB59E25BCEEFF5A943FCB84FFB09
-:100EB0001B21173BA383C7B213C3F73DF83E47CBB3
-:100EC000BA47679F33D27EB984F9486D7FD90772DC
-:100ED00043753DF18CE20F23AB67386FAD9BFD1A74
-:100EE000DB2993D438C4FBE5446D1F538DA33CC468
-:100EF000B757A8CE508FFFDDEB9807EB511AD659A4
-:100F00003C0AC8FFABEBECD46F5CE7A476FF3A95E4
-:100F1000DA878EC73E8076BFDA6DF22861FAE39DEC
-:100F200064EE77E5657F524CC5DF7F6354873EE50D
-:100F3000C10E19F5C58D57611D117527CA65C437D6
-:100F4000E537B342FD4C69710CF66FBC0AFDB0E7A2
-:100F5000AF2439B83DAA53EA462793B4105FFC2D5D
-:100F6000C9DD9104D7EF71783EC176B734FFE02533
-:100F700046FD73BC7FAB7C099ECB0F14525E391FBC
-:100F8000F3CA7934EC42C4DFE85613ED976BF9DD10
-:100F90003C4DFEBE8ECC33E78BBCEEABAC83F2CDCA
-:100FA000051608B40C0817A79F5B9AE794301F98A2
-:100FB000647261BDC3E82C4F3EE6635B9318C5477E
-:100FC000ADADC9196A0E720FCFFBBAB5BC2FFBFECF
-:100FD000BCEF918F627DA4B7AE9A687FFAC8A9581A
-:100FE0005780F60B2DE4FF69F5C82DD1BCCE806586
-:100FF0002CA03CD38DA29ED162F69A93495F050E38
-:101000009E80F77E7F99F17DC7F60F695FBBD83070
-:101010003C05EB7E0F4A43E3B07DEAA3D81C6A4F40
-:10102000C55E44FCB418AC2ACE7B669D5A82756DB1
-:1010300027D6B112AC637B6B9D85DA93EBECD49E23
-:101040005AE7A4F675B88EFC731C9E477E71BF6587
-:10105000A37D92296FD9146CF316C650BBFBB6184A
-:1010600013C2DB12CBB66BF360BD5A203AD080C9F5
-:10107000FED6A7BC8F59FA81DD337B474AA3186B94
-:101080007BCA3B5D990CE34EEDFF93AFE0FE9BC93D
-:10109000CB1EB3005C734FD91ADAA0FF76F2F2C709
-:1010A0006CA86F8F4783D2C3F5AE38EE1E0474432D
-:1010B000A590C605978D837E82D65F31BD6412638D
-:1010C000B71477643360ADECE495D32D80C75BAC87
-:1010D000DE1F63DFE44B9A5ED20FFBCC87F56041E5
-:1010E000C948713FCB9012B1FE65A6C3FB4672584A
-:1010F000FD9E5BFA13ED338D714BCC41871F8CB491
-:10110000EFC5EC1F2784CBDB4C47E91B488F89C90F
-:10111000BC0E78F424C91D5E5FA17F6EF439B5045E
-:10112000E934E642591DB633CB1DD4F72C185B8742
-:10113000F25C62EBEBFD627ABF3C99D78D142952C9
-:10114000445D89FEB97C6026F48F8347A3294F3024
-:10115000FAB4B716EB4F4B9D9979B2A6FAA8EFD81F
-:1011600082FB6DA32BCE9424A0FCD824179A89313E
-:10117000ACA32E01EE17DAB1A00AD7F54431D6FFA1
-:101180008C562517A2ADD0DDDA80EF17BA625C85E8
-:10119000E88F9F564BD0F49C52469D2880E7A60EC0
-:1011A000925D1618E854E0A68997A05F382C8EF25D
-:1011B000BC85CA9A2B27A81FE3AA51711D5B7E5DCF
-:1011C00045E398C9AEEF9E51FC2FC83F459E38CAF3
-:1011D00009023E4AC2EBCA60DD0477A15DF64749C9
-:1011E000C8DFFF5A6287FEEEFE1296CBC37CC3FFB8
-:1011F00042F78F44AB5100E86E93BD04C7DB6D929C
-:10120000EC0F51DF538CCFFB861855CC1F9525462C
-:10121000458C3FB5441A7F0EE1CF891B85D7CA3371
-:101220001C11F7DB6EB3929DA8782B87FCA2B6DB6E
-:10123000D2C95E54BC35A908DB3603F7D32BDEAA2E
-:1012400028A7FB061E07572CFC915BF429EEAD582E
-:101250005849FD5629E52738DF959CB83CCCAF4D61
-:101260001B945AA244F8810349FEF3447EAFD03068
-:101270007CD32480FFDEA37C9FA2222733E2F919CE
-:1012800005524978FDA8675254447F7689A324BC4F
-:101290000E756E456A44FF96B99911FD92A30564D7
-:1012A000BF410F5494801E380AED5260C1025107AD
-:1012B000A5E59F0A054B15B68BBCACC2E3EB61F00C
-:1012C000877AB0C41669A77747733B5FCED6D0063E
-:1012D00049F911BEBF5D9668FC24DC4E94CB1536EF
-:1012E0005E97158987BCA346B2977931921FE3FABE
-:1012F00092A34BEBD0F4966744BEAFF961E5023E92
-:101300006D5EE673B7A33FA2C1ADCDAFC15F2E2F17
-:101310002AA17CF735D6A18797C17A503FE8E168CA
-:101320004A16FE1AF81FE4AF897324F04BECCD7E09
-:101330006BFE7A05E82B47B8BEB2498958B7D797F4
-:10134000BED2C6EDCB2FD3C69DE9F0D0FBEE1D9FDC
-:101350009E9A2087F5333F4E880FEFBFF8E9A688A5
-:10136000FB491FCF7184F7B77E3A07EF4F51D45A2C
-:101370001BF0E53126B97CC8076DAA1203F4283E9C
-:10138000EDAEC3B6F4432F96ABB2A9E77C75D84E49
-:10139000BCE86F33C3BA6E1A26AB18BF6B7E881ECB
-:1013A000DEBF26F3BCC3B1ABAA15F75977FB542BAC
-:1013B000FAF3BB1F54ADE887EC76F37319EE2C03F8
-:1013C0009D8F7167F37AC5BF24F3BA834EF1BED601
-:1013D000FA8DDE4E841BEBCCD137A8FA264875E592
-:1013E000C7D0BFCAE9E95F1D53FC369CEFD8837EA6
-:1013F0005BF87EE2F5FA577F041E43380A99E40948
-:10140000D723C596284FB8DC96DA1D11FD93C20F7D
-:1014100099EA4C8D78EF263533E239F01B87A15FCE
-:10142000526B62546FEB33F07A5B3D1E57A4F0F8B9
-:10143000CE65B3A33B83FB66726FE7915CC5865EA6
-:10144000CFB7A5A4707FF03F5218C1352B85C3A735
-:10145000AFAFD5F76BF17C0FE293B99CC8E72EAB29
-:10146000E10AB8BCACE0E927A6535D6DBEE1DE2C15
-:10147000E8573CBD753AAFAB35ECC13ADB194F3F8D
-:10148000CFEFDF60C837823FB0CDF7C274AC2BAF6F
-:101490008AE2F5095551A23EB46E7444DCA3183EAD
-:1014A0007E6A21C69FFB8D0CF3FC8F99C00EE685EA
-:1014B000F6D9AD661EAF5A4DBC0E7C7DE6A9F5A8E7
-:1014C0003F3E8BF2E6A5509EB148453C5EB45BA81A
-:1014D0003EF4BE7DA529C807B35278DE2B7BCF44EE
-:1014E000279D2FFBE7C151FC7D7060FD308E73712D
-:1014F0007736F9E5D903189D27D1E801E1335D8FEF
-:1015000082F081CE6330B713F36FB50E138D332B9A
-:1015100085F3E3F5B63DEA89E30C6B7641BB2085A4
-:10152000C7CDB7E2BC046FB0FF2CDCD0B307FBCF54
-:101530001EC9FB486F59CE0BA27F1BFC510CEDC39B
-:10154000BC1FCDF1C63282B46FF3EEA26CD706BADF
-:10155000CEF1B8C03FB0B643C5FA0F7F3FACB71865
-:10156000E8F42E457CDC66F60F26BEB2AD89C17963
-:10157000AEB7DEB8EFF921E0047B327F3CA79736A7
-:101580003FE0D882747C579C3BD1E001387E8C7060
-:10159000687075C3A3AB3FEF147E7B278E971BCA81
-:1015A0005357FFC940798A6A09F424F4F77CC85C70
-:1015B0003E95E8437950DCD2C2F9C69F58526C83FD
-:1015C000B6A071158F8FDB9588BC9866CF268AE709
-:1015D000C7BEA744D8A38922FE1DAFCB4F4E6C9C3B
-:1015E0004EE7F826EAE2E25FA488BC651A4B0BCF0F
-:1015F00023AC15F1C6E5B68171E89F2A10E7CA80D1
-:101600006F932AB371F121BDD0B08E459C53D4F8AD
-:1016100070E469FB9D38DFC8D3EC0EF207B471BBF0
-:10162000F3131C2F97DFE37819D531ECE949D03754
-:101630001E3132BF1A5AE7040E2A833087E2A4CB48
-:10164000176C645FC61C9D43F5DE66A781A961EB3C
-:101650008F52A3991AA62FADC3E223FAB2A04F5D11
-:1016600054A41F902FE68971A5458CB73FBEEC08A6
-:10167000FA05F9B6E5E417C48D1B18311E6B532229
-:10168000FC833CE67163DCE802FAE27ED998D34A37
-:10169000841F302EB091CEA18EFB30F2FA8473916C
-:1016A000FD037DD1A52FFCB1DCA7D12FFCA1F873E0
-:1016B000B823F197501E89BF244F24FE521644E2EE
-:1016C00027D51B898FF4E52322EEF75B9317D11FF3
-:1016D000F0C08488E733C18085F7B31E9D16F1FC06
-:1016E000E08DB323FA4337DF16F1FC70FF9288FBDD
-:1016F000D9DB56FE207A8FAC5F1BF1BC9EDE3734FF
-:10170000FE34627C8DDE3EF8FBDFA437730AFF50A7
-:10171000D03B51D859879BD7AD75196D8FE2797C35
-:101720003C3682FACE81E7E963D1FEAB5497E79B62
-:10173000C6685FFB97B24742BD940EA8356451BDA1
-:101740003CD5F5FDDC6088D867B73BB93F6477725C
-:101750003DFE6B133F2F950EFE26D929030BC5D9ED
-:1017600016AC77648299AC8F639C5DE7E818A63A63
-:10177000306F07FDC921BDAAE9D1DBCC6A6D07E84E
-:10178000975132D793A03FFB39619EF7A5078DDCB7
-:10179000FFF019D1FF48B7305F6C1ED919CA433B1F
-:1017A00058A284E700E2427A5CFD0E8875706536C7
-:1017B0009DC37A134140BF5975D17ED3AD9A9E5ACD
-:1017C0003E9CF4D4655BA4FF767969165D3F7BBBD4
-:1017D00099EA07CE8A3A470D0FFAF3D6DA396CED5B
-:1017E000FEF22D9B62D0EF3C2BCEFF6AD7270BFC7D
-:1017F0004D76CAC2FE59D6603E6C1118F138C07BD6
-:10180000E5918ED8DB18F99B9370DD555BAEDCFE5D
-:101810002AF4AB0DC1646E377CF4DEFC77F9B9EEC7
-:10182000F97F8BFCAE408593C7F91562FC5BA0B1D4
-:10183000039E6E013A38B07D635219F2275CA7F31C
-:1018400071338F3023CAF32C6F26D54D9C62AE3393
-:101850007B01C4F94E95E09CCB3C46CC5BBD737BD1
-:10186000650C3ED73D9E360E300CFA25EF3A7CC60D
-:1018700064CC1B4CE67513309F05AF7B16A53F8CDF
-:1018800076499BEF1DE6BD7406E83B9BB9685C6D2D
-:101890007C86E9F9303DB57BF9AA8F1260BEB54769
-:1018A0000D948F58DB6CA678AD6BE57FED780AEE72
-:1018B000DF91DED10FEDF6FB2BFF3604F9E1D6CD3B
-:1018C000325381DEAADD7BA7336C5FE5ECD22B318E
-:1018D000781FECEED6A7D058BE6CA63AE2F757BEFA
-:1018E0003C24DC8FAD74162EC7F7D8B8EB3BEF580D
-:1018F000FCD2F014AAF712FCB442F0D3DA178792A4
-:10190000BFB536A69B9F787F2BAF1BD1D67146F013
-:10191000E3CA97BE89F8CEC46EE023D5CCF7C5D410
-:10192000A160EFDB2EE7D2771F8CDE7F75C2BC2D66
-:10193000573F89C5FE9E37FF4AF0B3B9D7072FCA74
-:10194000A26F4C687F5A3BEFB9A029211FE90E72A4
-:10195000B601C7BFED772F5EFA00F1D3FCF2D69F38
-:10196000E133D779FE7397967714F6C625F001F622
-:1019700086E28B2E16CDCF9308FF46C11DF92CFAB7
-:101980009E874A7CED66C7711FA7B6D5407526B104
-:10199000B8091496AF8B950D9A51725B9CA0AF85D8
-:1019A0009EF97FCEDB2AEAA83E20D21F2A38B43225
-:1019B000C20FF2C05FAF7ED033DE5ACC2FE9FDA15B
-:1019C000F101C36253DCF7F84587A6F5EA174140F9
-:1019D000ED96C688AD21F835E8F4F37E2157F53849
-:1019E00016E6FF03D1FCFC33980EF47B7F9ACAF510
-:1019F000B72D83F1F36952E7300BE8CB16E7A2C7A6
-:101A00001F856B96417CDDD8AFA53335F9C47FDDEA
-:101A10007ED7A111A4B7D8B7301BE243E43DF474DC
-:101A20002BC0F3ECF9617227DE0F1CFE6B2CE67DF8
-:101A300077C4AB6F213D824765DAFF89523A4C8EFD
-:101A40005EE2BB57510F029FCAA9DC1E581A797E6D
-:101A5000D1A2BA19C60F5176FBA8F0737F8D4E1E26
-:101A60004F561E7EBFBF09E871C9D0169B03E3AF76
-:101A7000DEBB3B16DDFF0C93F703E4C35567DF1EA7
-:101A800063A7FCCD96FE180FD607F87730462ACC10
-:101A9000A7E4F584A37A332C2601CFE927503BB283
-:101AA000297F19F2597580AF13C7C642BEE18D1266
-:101AB000F53B1B6BE371BCEADF37A7A13CBD9CC4BF
-:101AC000E3CD97AE66F3F715A6E0F341A74310D335
-:101AD0006FC0F8E46511D7745E95E9396DFE918D9C
-:101AE00085B21DF82127B0F100C5514D6615E91AE0
-:101AF000F51CE378688A22B9AF6E99CAD0EE7739BF
-:101B0000984B82FB3BA2837FA4F36ECD6615F3ADA9
-:101B100051F68D2C1EC6DF21F659870347E179293E
-:101B2000EDBA365F54D3D31873203F50DE374AD90D
-:101B3000C826DBC2F11C437876A4723EDA111D3050
-:101B4000609E253898B16709AE109C8CE6D5E01CE4
-:101B5000EEC7F3843B4CC1F3786E06E0B223FD87F9
-:101B6000330E276B1AAA629E20CAEEA67544D95579
-:101B7000974FEA0957752EF3A35DFFF943AC5B6EEF
-:101B8000518EABA3437D0BC8C08E814CC8F9CF1FCB
-:101B90002FC908EF836219177A7FC8AF363E5E37C8
-:101BA00089E2099F8CF12FB431F1B84E95D6A76028
-:101BB0008A298FE301F7DBAD167EBFFB79E06F1B4F
-:101BC000F66DFC39579CDD3A4D2239E1F5B8421FDC
-:101BD000DC2705CEDF08A4FD2A702057055856BF24
-:101BE000B19FF87495A1E9A99170FFEE28AF2B156C
-:101BF000E67BED43039D6BFDF38B51FE0AC0C7B03E
-:101C00007D5B92DDBDC8877EFC47DE7BE8C974A49E
-:101C1000FF3E49C53C6C973148DF37A96AFACC448E
-:101C2000F50D8D1F53DDD39BA9DE4938CFB8C61AF9
-:101C3000DA8F1ECF36D27E74B6380F5EEFE4FAE349
-:101C4000F2E921CFD684E17F492A972F16F40E407E
-:101C5000B96912F2D9827E0AB47B85BFB4B7F5D6D2
-:101C60002C352C7F58C30EA423BE1F6287A8D5AE87
-:101C700077F9F9B9CAEC772C77B8C3F86F9190F778
-:101C800045A9224F96EA9D8DF0AE6AFDC414ABE2E1
-:101C90003999FAFE6857EAC19FB2F782976EB9D5B3
-:101CA000C951B51234E1F3D517F8F957A0731D9E49
-:101CB0003778F99DC6118BE1FA5EC035D695FACE1C
-:101CC0009AA9BE72AFD1938ECFD79CF93A17F55629
-:101CD000090201F07CDDBC6A00E20DF8BE281AE5BD
-:101CE0006B17233DA6C9670ECA27BC9F837C5F8004
-:101CF000FDE1A4877798DAF9F9D3BDFCFC29F03D22
-:101D0000C901F0BD1DFD861C3BC801BD3F94E47BAD
-:101D100047BB81CEC9FA408F0FA67ED11CECEF687D
-:101D20002FB1937C635E3F0FE5347080C6A987D8DE
-:101D3000044927314FB83FD9E88C25BA69FAF1B088
-:101D400093093BA1C6E17903AB2C47C845983DE414
-:101D50007D612F4FFC2AF0F82FD176B8855D10FEFB
-:101D600014F3E6939EBF57D8AAB5AF4F98B91DD6C6
-:101D7000B9F684DC5D3F8EFE6B40F0C901E1CFA275
-:101D80009D5013783D0E5E1FBD99D7D58E71AF293A
-:101D9000C6B3CFE3CA371EC47682A7BE18CF3E4F64
-:101DA0005AD07E909F81E6E7D91B0EDC948DFBDE36
-:101DB0005D67CD0CF75D1AFE1AFCE34B8087FB5B79
-:101DC00000FFBDD825580EF11F58EC74E6EC79BF22
-:101DD0004BD2F4C7A90AE4C7CE0639D40740AA807B
-:101DE000C1B1FFDBD4938FFBA09F95E67E3E15FD2E
-:101DF000ED742FB55D27FF9A8CB660EF69EE47351D
-:101E000098DCD9C83F0D0323BF1FA0B54FA61A8980
-:101E10000E057D7CBFEB482ACF6F0EF1B1C7908FC6
-:101E2000AA1A64BB1FE87EA941769BC01F3AEFF651
-:101E300026E3D99C0BCC77CB44B4F3228ED4BEF7E7
-:101E40007217FA2960A7EEFE65EFFB0FAB99F65B00
-:101E50006340BE5AD624B1FF001C2C7F26F2F9D570
-:101E6000DAF76A1AB71CC6EF88AD7C4E771FFD15EE
-:101E7000FA0E46A41F732455F827592C0BFD13E0C6
-:101E800023D20F46851D3103DFAE48F7EE437BFCBE
-:101E9000B2F8BE02E85192C77D4E615744FD4170D1
-:101EA00007AF2B1EBECD2F1BE0FD098A5F467BC509
-:101EB000A0C57D87716E6F197D87C9E73E8DFB3E9A
-:101EC000CB853E5CAEF9697EBE3F026637C24FAB42
-:101ED00016AB1FCFFCB5B1B8FE6D12C5CBABB64586
-:101EE000EEA7548BF5AFDE7CF2309ABCCA7ADD7D6A
-:101EF000B1FE6ADDFAB57DF3CF5323EBBFAE773F7A
-:101F0000E42F46EE37BC2DC6D1EE9BD2B87EAC8214
-:101F10006520DD56FB65BF9FFB7936FC5ED09D6278
-:101F20005D770AFAD33AE1B9CA6D923F803CFE78F8
-:101F3000649DE95DF58BCB90AE7A3E5929D6BD7C88
-:101F4000BB91FC55FCFE0FCA9D9E3F568AF5AFD44F
-:101F5000ADBFCA2BE9E0E37E744FF8EA6F413A5710
-:101F60006E37B2DEE0D3E8B552E3EB3EE0D5E0D425
-:101F7000E0FEA1F0F64F13F9AD116C04D1A93CE1DC
-:101F8000BAE8A4F773771D1E41DF5BBB7C6420C5F4
-:101F9000FB1A1FE8DF2F137EF2D4CDDC6FBCD458C0
-:101FA0006C1D89F14C9BC125A9149FC58E04BCE40E
-:101FB00037CBAC02FA5D4D599BF0FB8379270AE6DB
-:101FC00060FC9F7FC240E7EFF61C29A07DE7FCA3E1
-:101FD0008312B228CFEDA2EFE3C038645FBBDAF220
-:101FE00036E1F984AEB692021C5782E7D00FC813CF
-:101FF00076A2A62DCF1A7EFE7C4C1A8FEFD73B3FE0
-:10200000FD39FAE9537719E99CC55463F04DACDB0F
-:10201000DA7344A17DF2D527963C1485F47D51A254
-:102020007DF2C3ED6B1317229F3519EDB8EFDDD5A7
-:10203000F4E30378DFB75DA2EF5E54379766EF8075
-:102040007EDE967C57F8F9B33C874AF0B1542BC535
-:10205000CF53FB19C96E5E4CB3FE16FD9F95EE2D56
-:1020600024DF17F7EF3151DDDE0E89A1293BEC3C6F
-:10207000F80AE2E3E2AB274DE88417379C34757C1D
-:102080008F3F70C92FB300C5CD1B4D18C7546ED1FB
-:10209000FA1D26A49347F84755CF7D4CFD95E8CF10
-:1020A000C37C2B9F91A97EF760F36B26E4E7AAED32
-:1020B000124BC90CBBBF598AF85EC312C6F96089BE
-:1020C000D03FAB987F7D1A3CB76A23AF5B608F46E9
-:1020D000D6016BFCBD42F0F7AAEDB3E8FB533DBE61
-:1020E0005B8871E30DF81CE7EF659B23EFAF107C75
-:1020F000BD42C7D73F4913FA67381B8E7CFD75A1D7
-:102100001A9703D7BF3EB972406FE7ECDB84BDD6A8
-:10211000ECE5E58081EC8DFEB9CEC62B046775DB5E
-:102120006513FAA7654D5F10FE2B9A5AA97EE466E7
-:10213000E65D8DF8BAB9C96A47B9AEE8E07A685A7F
-:1021400093D9EF97F07E3DD53977B5F0BA49DF7E68
-:1021500089FC1C4D8F69DF775C26F0B80C14787A07
-:102160001EFABB3C6EAE1271F28A615B0EE33E7BDF
-:1021700095B8BFFAE8C158F40FA7B12F6E47FAC05F
-:102180007C0CE763CF44E27DBAD08BD3B773BDA894
-:10219000B76B5DA9D933298F09712AC2B57A7B241F
-:1021A000BEAB74F1F963693C3FF6820EDF15416600
-:1021B000CD413854D9E5A7A7DB159CF7482ED85B4D
-:1021C000B4936AD6F77E87F14DE1676BFD99E21C07
-:1021D00078BD7DA32D3C6E8E4AE7FEC2CAF1B20FD8
-:1021E000E9D51D6F0C3A98AB1A42F106C419CD69B6
-:1021F000493CEEC082923732649698188A371E7135
-:102200006EAAC8837EF5762EF79DE3603C3C7FADD9
-:1022100030F247ABB79BE99C6235D09FE28A267EBD
-:102220009EC2D3249522DDC15F3F9A86FBB19852AE
-:102230008575CF6AE47C3FABE40BE297A383F87A21
-:102240002F2B6A4A6FFEBBE6B7E3F93035CC7FAF80
-:102250000239C5E7AB9A783D52C3816FFA67A29EF7
-:102260006BFEAFFE8BA1FD5AD845CD2F0C825F3897
-:1022700090FB45F4BDC9BB857C2DB3F37DBABB850E
-:10228000FD61521DF17995B1FE503CFA593B78BD84
-:1022900000DB871F8503FDF8F64B75F1B0EECE9796
-:1022A00024AA87C3F7F17B949D4BEA3F41BFFBEB28
-:1022B0001D16F237EF06BF654A5E4FB9D4E45BFBEB
-:1022C0006E560D7B88FCCF87581DB595829F3B1BB2
-:1022D0006BE9FBA09ABF42EF0FECE98F540ABEAF47
-:1022E000D4F15F547A24DFD5BC1D4D7E63D751D91C
-:1022F0008EFB3180AFDFA485E345F8210D07A2886E
-:10230000AE5D276D6447FE2CF8EDA2C83FD78C93D5
-:10231000090F86F1BCCD6E796D20D211F18EF5F7E3
-:102320002FB7BC36829FFBF613FE576D9323BE0F6B
-:102330005B591FF9FDD79AB76FA3EF0855EFEF86EA
-:102340006B88293104575F7220493C8E3448917163
-:1023500064F53ED9135E7706EBB903F551BA9007E1
-:10236000A6049331FF35009D0680AFA689D3D5D052
-:10237000CC5B98FF169E2731D2FC3DEE17F956E351
-:10238000FDAF33AD7CFFFAAAAF02FBF70F94A9AE05
-:10239000F3FEB7570E0DD7A30CE104BA561B83C941
-:1023A000146F9E34107CD5272F270FB2A15EDA520E
-:1023B00082DF0F9D2EF4DFE181D6E5C8CF3E9C374A
-:1023C0002534CECB69BC7E8FE17A9DE86DFC928F7F
-:1023D0002BD6FB109B2DE26ACE4F39697CBD108F46
-:1023E0008C4BEF251EB95EBF13ECC3A98512D63303
-:1023F000293E8C87F7BCC7F5424DF3B28F90DFAB17
-:10240000DF37539DD7FD2DCB8652BDAFD77B03FA67
-:102410001B5FB7ACB881F283D24304970FE173A27C
-:102420005F732619EB522B9BCF2493DDDD3B7A9310
-:102430002F06FD97BCE9781DFC09E23FF06B88FF91
-:10244000F6B415687E8C15C7AD3CAA78103F954749
-:102450000B8E57A07F71A2A800D5B974A280FC98FA
-:102460007CF4636C21BFA65B4FA6733FA6AB358A95
-:10247000F20B121BC8F9870D8AE09FD50DAF93BDF3
-:102480005FDD2847D42F6AEFDD99AED038CB34FE1C
-:10249000A997DCC41FBB78BBBA710FAD6F95B19E15
-:1024A000E85DB3DDC8EFEFE0ADF67D581F8BF72197
-:1024B0003E8EE325A0C334933F03F3D3C732B99FC5
-:1024C000AFA7C7E7E93CFF71ECAC7700F2CBB142B4
-:1024D000EF507B2F76C2C78A785C2B097C37F0736C
-:1024E00053FAE73E4B97C4774222CFB76AEDA974FF
-:1024F000AE3FA7997AFF2EE06FD2B57309EC314356
-:102500000146C546FB06E1D7A7867DD761CECD46FD
-:10251000F2174E31FBEB58EF3843D3B3E3B87DD518
-:10252000E7CBE789F73C9B55BE5FA43B3F334F3B6E
-:10253000DFA43BEF364FF83BF374FECED3E9C28FF6
-:102540001FC286A01EAC17E7EFD60E8FF287E7B347
-:10255000F4ED61B12F82E787B0AD19FE2EE57D8ED7
-:10256000B59E7D85EADDCE46B1813CAF47F9EFCA25
-:102570003EF2DF35DD72393782CF34BA5C12DF8349
-:10258000D1D365B7A6AFC4BE5DB4D8B7F31BBDBB8E
-:10259000519E2B2D174DBCEE3068427D56339CFB6F
-:1025A0004D974A25DA6F0738FB9BC3F4FBA5541EF1
-:1025B0007FDD7F8B4479D7567C1EE3AC7A89EABCF9
-:1025C0002B03ED26E4A7210D8B1F26B9F5B1D32CE3
-:1025D000ECBB1A332DDC4E76D34F5B77B71D8BF7F0
-:1025E000717D9C482D3E8F767186B083FA7351437E
-:1025F000597B593AC033DF2DB9B01EA02F3ACF5EB8
-:1026000030EA7544C3F5D2BB33DDFB4E3ACA79FBE1
-:10261000E55B308F7A6CF867FDD18E56F5C1C71F28
-:102620000B3CEBBF2BE31AAAD6E2F7556A9DDE0EF0
-:10263000D29F866F6347301CA7E3376B25A4132313
-:10264000FEEF4B7E3E13E37E96CEBF770FB8A77D9D
-:102650009755E9BC4EEB98D19F41798A9CEBDBF70B
-:10266000AAD9F7462EEAB3CED6A3B9A630BA5E5C95
-:102670000B7A00ED4AF3C164D516CE7706E23749EE
-:10268000D2F84F11F632920F2F221FE6607B26768A
-:1026900010EAE35DA76207E3787B79DBCDAF4DFC01
-:1026A0007BF6101F0D9917130EDFC304DFA57A3ECA
-:1026B0000E631D43E68C0CBF5FDB171F5B33888FF7
-:1026C0003B22F8585B6F3D7ECF07E38016337DCF0A
-:1026D00007F3D78E3039199AC1F5CF58F1FD9EF125
-:1026E000CC47DF391C2BBEE3335E6101251EF7CDDD
-:1026F0000232DFF7E5E72DC6087E1EAB045AB18E25
-:1027000062BCD8E799C0DAE9B9292C48AD9BD9E970
-:102710001C451173513BCE12988EEE544E7D3DD523
-:1027200025069215C7798B38AFD10BDD42EB57E800
-:10273000BB3DC49F329ED7E9FDBB2FB333B8DCD37A
-:10274000C74590BE9718E5B9F07B6D38C9448595AB
-:10275000637DD3648559A201DE5D870C24CF2D1DD6
-:10276000AA1FEB535D09E2BDCF19D5E18E757379D0
-:10277000459383F518DA7AF5789800E3619E6DAC9D
-:10278000029128E13140F3DDC8F8399242A652FDAA
-:10279000736946A6D0F7418AA38A218E427D6FB025
-:1027A000F8081FD33354BA8FFB25B130CE848D1275
-:1027B0007B0FF73FB2F87AB5F1270023E0F9C2E9C1
-:1027C00019DC9E614AF5BD78BE8F124B05CD25768A
-:1027D000FE9DA364FACED1F5E2B52B997FEF32F6D8
-:1027E000CE60E7CF0A42FB492EFCEE516CE83B9BE2
-:1027F0002EEDDF830844FE7B1077642CF911F2A3E1
-:1028000056AFC7BCFCDF7DD0D7EB85D5E7B10B61F8
-:10281000E7B0B5BA926DFED92A9EF35B9068A173BA
-:10282000BF7996FEF968C7063ABD34FEFBD2F6C101
-:102830003498E21FED8909F1BB95B9C721BE4375F4
-:1028400083FC3B50DDE7AE92199D57B49A797DE544
-:1028500063201FF81D26902E15EB68D883C5548F72
-:10286000B9DE6171E1790933C26D0DC15D6B11DFB4
-:1028700005B5F07D717D3D68ADCD40DF1DAD65D105
-:10288000740E3D29DABB2E03E0BA2FA688CE7767F7
-:10289000EF9CE444BF317CFD93B4F51B7AD647C26C
-:1028A0007A1FC9E8A51E515BA7F6EF76D805FEB4DE
-:1028B00075DBB5734A6E25E29C92868FC7A2F9BA82
-:1028C0008DB8F39F45EFAAA837F4EBFDFFDC29BCD8
-:1028D00016A06400000000000000000000000000DE
-:1028E0001F8B080000000000000BD3D76660F85172
-:1028F0008FC02E9A0C0C5DD2A862B4C41D120C0CB1
-:102900009780F80B106702EDF5926460F006E26DB7
-:1029100040BC1D88C5A518180280381088FB80FCB3
-:102920007E204E07E224A81BB30519187281381FB8
-:10293000880B815848808141588078FBCB15191845
-:102940005EAB22F85A6A0C0CC91AF4F3FF60C38E0E
-:10295000B6F4B5EF14D0BEE56E08BE0490BDC20D4E
-:1029600055CD4A37FC66AC42935F8DC65F83477F87
-:10297000A20D2A7F99292A7F9D3903C3432435CB91
-:102980004DF1BB051D0B02FD2784274C9730A2F2A9
-:102990002732A1F2F9A17C00BA0B8074A8030000D1
-:1029A00000000000000000001F8B08000000000075
-:1029B000000BED7D0D7854D599F0B93F73672699DA
-:1029C00099DC24433260126E7ED0A001879860B0FB
-:1029D000586E20E147A30E082CB440262888166DB7
-:1029E000C49FC6DD500609BF0921E14F70D11D10FB
-:1029F0005DEA63FBC5565B75BB7682D646AB356830
-:102A0000D787767765A015BFBA761BD96D976EBB51
-:102A1000F57BDFF79CCBCCBD9900FEECB7BBDFF3B9
-:102A2000C5C7E770EE3D3FEF79CFFB7FDE73C7C5CB
-:102A300046B1E058C63EC6BF698C4DCC658CD5A664
-:102A4000CA160F8B65E73096DB213156C3D8CA769C
-:102A5000253E0BFE59D8D1F20AD697B7B90D772982
-:102A600063FD0FB8FD35503FBD5D09BBA16BA3E20F
-:102A7000A3FAB22E57D86DC0F3AD1FBD9C8FEF37B0
-:102A80004A610675C6EE666C32636B3CF04FA82F48
-:102A9000AB4876E0FB77B748E118BE66A66F12BC7C
-:102AA000BF95F1F7CD0F281A93A1BEEFB626369148
-:102AB000B15B7A60160F35641FF3F68C153016E1A2
-:102AC0008F58CB16785F997A1F615D1F29D0AF3977
-:102AD000E678BE6FD6FB2C80EFB5D47358CF31FCAF
-:102AE000C714C62E65FEE0E96CF87798853F56A0BE
-:102AF0006CC8676C740A5FCE9231807E1463731960
-:102B000073B17218A7F632172B83F559786CE378F6
-:102B10005CD624111E97F918D5DF9D2BC51F2CA557
-:102B20007E6C7A3594F0BC200FCA20330BA18C78D0
-:102B300058221BE09FDB76D97BB8FE0D38D5686A3A
-:102B40009F08C0FB052CEA6200DF9FB118958B59E6
-:102B50009CCA2FB304C1B1940D95A850BF4B496CCA
-:102B600062304F38149D8EFBFBBBFA63EF4AF0FED8
-:102B7000FE6AA9760A94CC9747EBBED0FAACF95519
-:102B800016B90EC7614C7645FC8C8DB7D67998C5C1
-:102B90002A828CE93D3E4E2F87593F83FAF8064141
-:102BA0002F8DEFCB215877CFF32C8CF5106CE614DA
-:102BB000A887BAB2E21BA0DEF378AC1EF172AC05B6
-:102BC000300FFD8F35BAA56815942EDD158132A41E
-:102BD00032A6009EEA1BD64B0AB49B1BE5E38C375A
-:102BE00035995D09F5C3314915CFB1BFAEC7241D75
-:102BF000EAE3A1FEA084EF751783711A1A725DC90A
-:102C00002AC477CF181DCA8AC35A4206FCD69B3AFB
-:102C10003D676C11D1D578416B734DDE6FEEE13CB1
-:102C20003FA3F7EC4F1F5BEF01BF9714F17D3B769D
-:102C3000B82C07E165517BFF2295C53C79293CEF13
-:102C40005C072FDC29FCEE3A5CB615F176AC4F0D33
-:102C50000B52B68D0FE3F636C0FB335572583190E8
-:102C6000CF8A38FC15BA5FF7A5C6D9B90EDA5F96D8
-:102C700082A35199DA4FF83019F1E3DC1A685F95B5
-:102C80006AFF04B60738F6203CD46FCD512FCE131F
-:102C90006134CF48F4F0C23A9DFA0D8A755CF3BFF7
-:102CA000C3B44F731B5A243EAF80AFC10E9F555A19
-:102CB000F08D34FE31019735BE35DF13EB425436CB
-:102CC0002A558FDC8BEB3AA2F175CD371EDF8DF8DC
-:102CD0003BE209C7A0FEE4757F33E65E18E28AE9AD
-:102CE000CF5FFE0CC3F9963F7C3BAEEBB92C5AD7B5
-:102CF000531F9E79ED46367CDEB7041E7E7A6EFE4B
-:102D000010D5ADF9E79AD21809E8ACD294122EA0EA
-:102D10009763F55F79F85E03EBFD26CA934AF39853
-:102D20002941391186A1FD66EA9F3E06795609DDE3
-:102D3000911F2735482DD8EE891B1FFAD27DF0E868
-:102D4000A72E0EF7157FC9E1BEECFAB54F22BC974E
-:102D5000DDB8F6E7CF40FD0A1482C07797DEB47F76
-:102D6000CDDFC13FBFB1F02F97EF61241762D900CB
-:102D700047AE2931DCDF65DF77DBE4CAB1E7FD244C
-:102D8000570ACDD218F2DFB23E89E4737FA39B05C8
-:102D9000F1FDCFDC7137F2D7039249ED9F75C75132
-:102DA0003E1C733186F278D9716F1CF985AD5A4695
-:102DB000F23A62C96B337FE9BD30DEBB0D963CE76A
-:102DC000744AEF617DEF9ABFD87E35F43F63BAC293
-:102DD00028362D79E1C4F3BB02BF91FA72A2836554
-:102DE0006AD215CE400FCD6D8A4D6ED7379C24BA6E
-:102DF0005A06254BE3D3B982CF9635FC42F0A74E55
-:102E000072C909CF1BB585C599E8EE94802729E8DA
-:102E1000ED5DDCEFCB103EE88574D3A5C495343965
-:102E20000D7FAEC804AAC790A56FD96287D392DB85
-:102E30002DB16C9BBE02F9FB2F28379BDBF26DCFC7
-:102E4000E7E6B0DAA99F4E0EFF81E4705222784087
-:102E5000FFD2FE47E2521CE5A2B53F7788FD8954B8
-:102E6000305ACFAF0E48F118ECEFAF8E88F5ED93E6
-:102E7000E28A44F46A9EF6E0B83067796AFF6F1719
-:102E8000FB9FDA3F8E1F0B5F293D97BB290920B4BA
-:102E9000F8222528AF2DFEB1F0DBBFE74725B87F2C
-:102EA000856DA5DD7508E70185F8F7C3FA93C5B808
-:102EB0006FEFBA00AFD03F72F8B100F3A5E06F1129
-:102EC00072F0830EA017782E219C9569700AB85D68
-:102ED000588776B737487DC8A7BF14F35AFD7EB42C
-:102EE00065C64CC4CF1D3D1243FCDC7EA477D99F40
-:102EF000C3FA57C7B3C338C5AF1A8B0397003C2B2F
-:102F00007AECFB796ACBCD01A49B0FFBF20B709C92
-:102F1000DBA72634847375E255CD003A9B65F66ACB
-:102F2000C90C74F561DF8600B6FF50EDB9F11A9C4B
-:102F3000679F125E0FE3AF3E523AD3E4744AF4BB8C
-:102F40005AE0F7A4DA33730CC0D7F28D729207EF10
-:102F5000F529B3E319E4E7D72585E860759B5BC6DF
-:102F6000758E442F1F76B85802E7511384CF91DA3B
-:102F70007DD0D742EFFB1F28BC01EDB7DBDB5D2422
-:102F80002F6E6F73133DAD6E90E24C4AF1DB0A0178
-:102F9000EFEADD0ABD3F694A243FACFDBA5DD0DBF4
-:102FA000C9C357BD82FAFE0CC81F94BB3336FE500E
-:102FB000BB04F0B0620B97472777E72EBD07E58883
-:102FC000D0977788716F8B2B36FE58D99E6DDB8F2B
-:102FD0006857BEAD7EFA48FE8D7548D75D0AE9CFC9
-:102FE0005B363EA685483ED9ED4DE4B0490529FB48
-:102FF000F2041B5A708D94A2278B7E6E6D037B3377
-:1030000030DCDE6C3922913D7AD176661BD899137B
-:1030100087DB99961C89A07D569E922396DCB84B3F
-:10302000898E0D021CBF76452FCB2F27B9F1805416
-:103030008B74A2FF16ED4A16536A51BE5DACBCA05C
-:10304000C55A7C047FEF75005D65A0D719485730DD
-:10305000CFCC9EFE8CF43C433268BC14DDDC1220E5
-:10306000BEC541018E668FD985705E02137BABA908
-:10307000644A1E2F55A86F4698811E4EAD95E28773
-:103080004A793B1FCA5380EB1A78DEDC75797C9B4A
-:10309000847621FCA1FE6CE37637B433FD79F4DC51
-:1030A00094A02C6A2F7D19F7E71210005A356F8F04
-:1030B000F3809D452881F6097735758D05A02C860E
-:1030C0007E32EF4FEFB15D80E4789CD68BE3E3383E
-:1030D000154A7C0DCA198B8E9709B90372B5520532
-:1030E000FA6A665961D49BCD6DE5E7B55F6E08DB82
-:1030F000E5C74D75763D30D7B4CBFF9B675F626BFC
-:10310000BF20526E7BFF678BAEB0BD5F1CBDCA5641
-:10311000FFF2AA2FD8DA2F6D9D61F7937E9A4BEBC1
-:103120005923F87224B85F17F2F2270EFBD42A9BBA
-:10313000AE4FD4BC0DFBC4D6B9C38F4371620E5BD6
-:10314000D49726577CB244F8FC0DB009F70FFEF473
-:1031500031E131C4E76DFA0B776B26BAD3443F34C3
-:1031600097D05E72B63FB118E649EBF76F924474A0
-:1031700078AE1FF3F4FC12406E014ECE01D4DFC9CD
-:103180009225B86FEE5C83DEDF25270BB0FE1B3681
-:10319000B4371FF7D7972C46FE6956D973520EF6EF
-:1031A0000B7BDC301F5843AC0DE8A3A5ED47C7D11E
-:1031B0008E938C205B82758F2F81FCCD3A5C1F260D
-:1031C0002DBC031FF686A21F4A0087D4DEFF7B09B1
-:1031D000DF7F9F19A88759B22817FD479C2A9D0FAA
-:1031E0009B66B056C4D789463BDEBC621D3F9764E0
-:1031F0006AF71C337F8B7C7452D2F9FA04BCDB244F
-:10320000F32CCE67C1FD6EAEAEB14F07B722D72209
-:10321000DC3F22B837B4B264B63232DC5730D32D3B
-:103220008F1A0ECF596666657A3E0BD835D3F3CB2D
-:10323000DDAC12EDD5135256787D299643FFF83553
-:10324000E0ABD8377CE1C78DE1743155CEA5F99B51
-:1032500085BD5BD82E25B2D13E651EB25F59CF43E6
-:10326000A607E59A10712D6DD2495C3FEB68349347
-:103270009ED47A9921B1F476E7F6BDCD4DED2D7946
-:1032800063C92D0B9F965CB1E4978557E7F823C976
-:10329000191C4FCD43F8A393E4743AD1011F1310C6
-:1032A0001EB31AF7CFDA377023639EEA91F7CD92F7
-:1032B00053D08EA1FF3FD27E019EC8AE738519E127
-:1032C000E9DDE0D0D2A760DD036D5C5FBF5BC4C801
-:1032D0003E3CD376D5400EE2C7E3A940FC14F2A9E8
-:1032E000586170681DCA579F9AE847B80A85FEF270
-:1032F00032AEBF0A99B1E36AF4EFDB4F2EC176D646
-:10330000FEE48AFD6986FD417FA4D937548C76920C
-:103310001BF51AB47383DC45B95CD8FEFE7FA05E52
-:103320002C74E8458484A5C39155B5E36A237DFCDC
-:103330008F36A27D698D4B1DD2F73FA89D44FC16A8
-:10334000B66FBE5B09D8C6973E463C08B98D66D7B6
-:10335000B9794AD15E9513EE408A2E9C7059FD468C
-:10336000A213963E4FB9AD4EF684B3EE0E6B36F90E
-:10337000FCEE1FCB735A7DE7A137E7784EFA76F261
-:1033800081C0C3A7A0D34D9C4EB95CB0F8F63F8B6B
-:103390004EA3D6BEC672EF3882FAB54B0BCF32D0F1
-:1033A0004E18FA21B713DCC621A4B398945509EF3F
-:1033B000A31D2AD98D965DD1BFF6AFB794C1F31383
-:1033C000B532F91127D673BADFF300B7472DBD1D0B
-:1033D000157A1BED02C42BD80D036E5E7A701CFFAC
-:1033E000FA9B4B2580DB630CF5BBB17D9B41F66AF4
-:1033F0004E5D5C6F84325E71C833CE48C9A5642CC3
-:103400003F6F39ECD7B7728D6511B2AFA3A3E7FA5E
-:1034100053EF7F2C73FD34AD84E5CD86F1925BE5EF
-:10342000F083D03FE9B2EB31AB5CA3707D99F4B28D
-:1034300012F483476A37A4587A55D7685FE60F1CA1
-:10344000C77D1A691F6007748A639EA3438E7798AD
-:1034500087C64FFAED7AE8A4D04316FC9F40AF2E02
-:103460002C06FAD82B6586FB23315EF4390000F672
-:103470003BAA3233533BE7BAFF41F44BC82ACDB7DE
-:10348000A362E76CDCEF584C09A7EF8755FE85C2B5
-:10349000F567CEDC86DC4668C7D6676E9727DA3DCF
-:1034A000765FD622F4AF00752AC66B42317DDE6CA2
-:1034B0008C474ECD9B843EF68F51FFC0BCBB23672B
-:1034C000F416DF27C247414819191F6FCA32DF4778
-:1034D00007DFEE01770DE56752F250FCA525E6CE39
-:1034E000C8C7969C72CA23A79E934C93B5550F9755
-:1034F0002BD6B89F549F817CC85246A5ECF673FA30
-:10350000EC62E97104395022B3685F06FFF46A8502
-:10351000E3A93FC6E314AA2993DE9AA9343109F03E
-:10352000B421C8481EE4E15E23DF36B038A080E550
-:10353000B3F0800FE549506609F25B9D7EA0D98407
-:103540007E609083C6F45165FD85F03C387F259DF3
-:1035500033B00897B73AFCC7F9C8247DE116788DD7
-:10356000C626519C33AFC92EC7DDE807827CD41B29
-:103570001CCFE7CFA4F306374B7B0EEBB84AF1071D
-:103580004F8369CFAA590DF267F5FEAB762D86F110
-:103590006B1EB9F96D2C271FBC27FF4B50D63DBEC3
-:1035A000EB662C4B5E8B8ECD144FB54AE01426D7BC
-:1035B000017C3E66B873466E67AC57226857C33EBF
-:1035C00076203D2463E55948DFAB14CEFFFD0BB4F4
-:1035D00000C667D42D5CAEAAF3017944FFDC4F6FBF
-:1035E0004EF9D3E457A8C24F52DA158A2324F53294
-:1035F0008AB71CDA226B58829C8DE13CD6FCBD2236
-:103600004EDD29E2AD4EF87A4B868A510E9E58FF68
-:1036100011D9878A9E159E0DF375F95909C121E2CA
-:1036200005CD62FF926BEB3DE9F12245F8391D476C
-:10363000E70C184807034AD86B10DF68386E74CB64
-:103640007486F197597A98A13DD129FC1EC567323D
-:10365000DCD76C9DCD44BF165E6921EC5FC5C20905
-:10366000ECDFDE8FB885F59AB7231FFCE05A6E8732
-:103670009C28B5CB6D20A12ED85336AB68BD8AB43B
-:10368000D9149C7415D2FCEF9502215739BDBE5157
-:103690003BE5B16D4007CFB9CD7B94519F808F1C26
-:1036A00072FD07C026B86F8F4A76796E95079D7CAC
-:1036B000D426915DA89A7C9D33950F1B514F6E04C3
-:1036C000BBB1D018CE2F1B5F6764376E04FE8B959D
-:1036D00066E29F6A0965C4C5F24F5E7BAE84718C59
-:1036E000CFCA3F7FA988733AC13F406709B4631EC0
-:1036F000958CCE29B0BEEFEC6BFCF11478FDEC811B
-:1037000015D9D740F9BDF8C6EBAF81F96F7F7C4F73
-:1037100036EEF3A3AF023F9DC78FB7F8A9196DD856
-:10372000F3C4D98CB5767E32D657103FBDA570FD57
-:10373000D5BFE0776F5CFDFFF9E97CFCF4B602F4DD
-:1037400039ED4F678BA3E7916FCD454C437B0BDA87
-:103750009848E7D1A0BDF4A95984EF752E2EC7FC77
-:103760002E2FB73B42FCBD73BCBF513F79FC60417B
-:10377000F967E7D3753EF3A3CF83DF41EE90BC3901
-:1037800031CECEF79D2E4E77BF727DE2F5BDF3852B
-:10379000CF617D60D7937D779DCA0CF40326BEE090
-:1037A0002161F1EAB88D479025A6C1F3501E7FEF45
-:1037B000CE237919473B6648A9A4FE26E3767C53BD
-:1037C000CDE623FC5C62B06211F8CB73E05F688FDA
-:1037D0005CE7E37E058CC34230FE6A6FB4581D453A
-:1037E000E3917FF9EAF3FB82285F5EF79825F89C66
-:1037F00025D55C3C1FB0EC8E91F95D65A7D3FCAC80
-:10380000A73546709CBA54A378258AB100D4B796E0
-:103810005E4A714A168E1D97B03E4A6728C795606A
-:103820006431D9216D6E6316D4B78201150B12DD98
-:1038300092DC54DA7B430194036097E07B3536D702
-:10384000A3A1FF324AC6203473B77D447EF7896254
-:103850002E6F3BA6303AA71978E0DF96CA68EFB41E
-:10386000BBE9DC02EC46E2D7A8901BC9E0F4500BA0
-:10387000FA19455A5882FAA6D82F8E7F8DCB13D3CA
-:1038800033393D3EC2E31D2D21EEEF3AEDBECD5F53
-:10389000BFEC4D03C7FBE16B5D9743F9FA933F7FA4
-:1038A000FD7278F7C6B75EABC1B8B7BB4EB3C51DE6
-:1038B000DDCC7813ED2DF099121ACAE7D8C925B8D6
-:1038C0009929BF4E8A217EA235FE38AE17791BF1A9
-:1038D000939CA2F0F345F80B017C01015F77F05453
-:1038E00015CD137BFF3F32C97BFA9B2CF408B4DB68
-:1038F0009C777F1CE5486ABE49249FA2209FD08FF9
-:103900008CFA7A96ACA1F9FCE107B1CF1F61572779
-:10391000A7CE0B0F6D99D782789EBBC0A3239DB90C
-:10392000639BEF463A77AEF38CEFC14B3134679B24
-:103930001FF8C45DA1995EB27FD961DA0FD1C4824C
-:103940005B0705827107E8BF6C05CBD0DF80FEB84E
-:103950004E9067686F5BFD808C4D5CEF19DFF44B18
-:1039600029DE2FE21556BF9B62129D13DC540E6CAC
-:10397000503E1C4F1B7CF24FBE86E72E3145573818
-:103980001D842AD2F0867FF6B819A78BCBF6D9F51D
-:103990002ECCBFB014DFC714A21727BF8C8FDBDB80
-:1039A0006FF09DFF5C7FF87E723C4F14FC66F5B7AC
-:1039B000E02378A54CF175FBB9CC4D75F6FADC61C6
-:1039C000F8383F5CD355FBB94D83CF3EDECCA0FD2C
-:1039D000FDEC227B7D03C66F3EC9BA1D7CF7F4184F
-:1039E000F33BEA67F0EB2DB9FBBE27F2B7348E1A32
-:1039F00066384EFF82BDF3E7011D14EADCEE289C19
-:103A0000BFB021B706E51413792699ED8F42A1EFD7
-:103A100095F697941CF4474DDE3EB9E4AD1939781C
-:103A20005E5CC7E83C3DAADE13CB3152F648BF5A74
-:103A30009E8578FEFCED91BBBDE97937297BE48159
-:103A4000578D9A0CF6887A8F64C238B396803D52AF
-:103A5000956E8FB44A2883B297803D427647F43DF5
-:103A6000C4D74876C98F2DFBDE9FD9AEFE83CAF539
-:103A70002CE8997FFA2C7A669CD7FC17F573B0076F
-:103A8000A695182B2319E8F00395C73B2CFDD918F0
-:103A90004C2878760E7A5375C1F36BEB922FA138D0
-:103AA000EED0770671DDB01E97ABF6D3AFE78CCAC8
-:103AB000E199A8F23C9891FA7D6B047FC5AB7985BA
-:103AC000DD62DFEFFE05EFE832FA2FE0C7A0FF92DC
-:103AD000F4956DC3B8E099984AF13A75FECADD7362
-:103AE000919EC0CEE6F47C7EFBFADA21D9C6C7D31C
-:103AF000CE66D9F8BE9ED9CFE96678ECE7748DBA68
-:103B0000FD9C6E56C87E4E37C7B09FD35D5F693F40
-:103B1000A773DAF73347BBFE7BDAF7A14646FC749E
-:103B200001FB1EF8E926A4A791F8E9BA7CE3FE4858
-:103B300086FDAED6B89DBADA1B59807437CDE076D3
-:103B40005D34B69EF201F3A2206F4A296E48712FB0
-:103B50002BAE65C5BDACBC402B9EE58C5F59712F6B
-:103B60002B8E25C578DCAAD9135D81F036B79F94DA
-:103B7000518EE8CFC13CC808D639DEB0F81C970793
-:103B80002DED99E372CEF8DB88ED3E255F7D0EFAD0
-:103B9000613DAED7D20FC0E70F7E163E07B9B50D17
-:103BA000C7FB17E4F751244FBA69FF2A00D768A76B
-:103BB000C33E6818A75F707A3FC6E3D4E36EE2DBCA
-:103BC0008BF57F31D141864D8B820F8EF1AC68AC85
-:103BD00094F48BC537169F38FDE361FCF15FCD3F50
-:103BE00017E91F03FF7CCF751E7D04FCF13CE27BCF
-:103BF0005A25C7AF931F2CFA07924848D5B8DFD192
-:103C000004B6B7E89DBD183611CE89C2AF39315A16
-:103C100023FFE2C4F3FFCECF619FF784C78935E26B
-:103C2000FB89DD05F16DA5293EB3F8A9DD13FDB1D2
-:103C30002B2D0FC4CA773CEC315FC7E721B52F812C
-:103C4000FE4A68360B6F3088CF8EF1E79C4F7D615E
-:103C500046F1D3CFEC97ED75C5F17CA8451A5ACA49
-:103C6000C86F651AF2AD2AE4C98B59D19388CFE6A3
-:103C7000E991124E4F43E37C00D72F3A14F2D73E1E
-:103C80002B3F358F84FF73F8880EB96A87E707A446
-:103C9000CB2D946FA19016DF20659057025F7116AF
-:103CA0001E83EB83FDFC77C4635E15936839828FB6
-:103CB0009B3DE61F5C9FCDFE50B4DA141F03DE3C33
-:103CC0001ACAC56AC05BF970BC9D74F1F53BE92F57
-:103CD000A42665A4FF10C8D10D52DA39A9C08BB54E
-:103CE0009E91E4B345A769E70D212D7DBDFF8FCAE5
-:103CF000654B5E5EEE894EC67D709B1121FF4CDAEE
-:103D00005FA79C196E07C974CE7806EC1EEC76B1DD
-:103D1000F275DA592F1E96B0A967152AAF3D4B8769
-:103D200027EC8B67B3A934CFE653597F3697CAE99E
-:103D3000672FA172C6D9D154369C0560C0C4693CB6
-:103D40005B4AE5CCB3575039EBEC782A679FBD8AC4
-:103D5000DACD393B89CAEBCE7E81CAEBCF4EA1D2F8
-:103D600069FF18EB5592DF96FCB2E4BB537E5BF221
-:103D7000EFFF9AFC8E355C94FD03FAEFABDA79E441
-:103D8000F748F202F8FA3E2D5D4EA4F4F3FDDA672F
-:103D9000E0EBE3824F817FDFC3388C07BC388A5366
-:103DA00085799C2A606806E669ECC326B0A5FED238
-:103DB000C8498C1B342FF0E831807BA05423F9B420
-:103DC0002DA8D1B9DB66491FCDE5413281F4B73367
-:103DD000A4D178DBFEA878317FE1A55105019CA72D
-:103DE000DB2FEBD8FE5BB9C97DB7E039FE14163E78
-:103DF00004E3ADD8B3C793EE87EF47E300E00BC40D
-:103E00009E660CF87AE3A8DF2DC5F97C5319C563CB
-:103E1000A03433E58B7DD32DCEA7D5A110E269ABBD
-:103E20004F267DD0AD7B441E6A72A005FDDC3A9919
-:103E30006D8379378C7E670B82AD8E2BDB5106F557
-:103E40009D75655EDCA4A75FF92044F604BC435071
-:103E5000A04C88D2CC81FDE9F4868DF39DB729C6AC
-:103E6000D03A2456ECEFAE1EB9DD26FF4008E9A398
-:103E700063D2E4CA5B60FEDE4905A371FEED3547FF
-:103E80006DF850747B3C45C18023FAE175498AABDB
-:103E90006D908D1D65B0BE80C8B706302B23697943
-:103EA00007161C4A18D6C1E14A287C3DAC009EE7A3
-:103EB000D6256249BE5E13E3AE3E5F3284FEA25257
-:103EC000779AE26D9DFEE422AA3BE0B0C6FFAD66A4
-:103ED000E50570BEF109BE699EF4ED4594475EA507
-:103EE000D1BE75BB8616603DB6D6C51ECF10BFD9F4
-:103EF00020F8795BE5F9E332AACF0E47B7D7EE2F6A
-:103F00005AF0BC2F4A271CCDAEA15199F6EFD3CE63
-:103F10007FA1757FDEF3758E903F70B9DBBE0F0118
-:103F200021CF9BA77C3B84E7E2163C9D12EC43CD5E
-:103F3000E7BF0FCD53B8BCFEBCD7FB3F6DDCDF6BDA
-:103F40003CAE027C3ABB1CE38C632687305EEBB34D
-:103F5000E2D1E138E52705301E4DBD0CD243AACE93
-:103F6000C7505496403E94B33F4CE03E29D59AA1A9
-:103F7000909CCDBCEF4A7813E5B539F9D3829BFE0E
-:103F8000260BD381CE0FBD567CDA5027F3FB1218D7
-:103F9000FF5598753ECBE3D3567FB542A6783405DE
-:103FA000B2D3C651410FE3398E8271EABCE1F37F8F
-:103FB00037458FF6F98B787C5C51B91FF89EC4F1B8
-:103FC000117B55A17CCFAEE7B97C63C719C9EFAEB1
-:103FD0005A83CE5576C0FFE83FC46A7D71A45BC5A5
-:103FE000918F77A6727A08E5A81517A7F9F8F90056
-:103FF000C5B9314F91E2E606ABC0F7DD02346B1C68
-:10400000D58ACB57AE9984EDFC06F33C07EBF3D78A
-:10401000B1C425006FD0DDBAF5F2D20CF1F0CA358B
-:10402000DF7812E6DDFDD4F45F3D09F55D72F8D569
-:104030003A6897FFE53AC2AB331EBEAD523675946F
-:104040000F3EDF21DC57B0A1892E6EED9162F83C66
-:10405000DBE73BC8F7BB35A4205E404F225EBCCEF9
-:10406000BCC8747C97211C3B07E6C1BFBD5BE72D34
-:10407000C379116ECCAF5CD15BAFA19E092EB19F0D
-:104080005FF89BEC756F951DCEAD62FF2E44FFCEA1
-:104090003CC41E73DE22A4DB33418DA1BCD9B8F62B
-:1040A000EA1B49EE6F57D8B8D20CF4EB5857A7E685
-:1040B00022FDDF6DD4EFAD40BDD1A0515E4F77DC66
-:1040C0001BC714EFED75A973139BFD6E68FC1CAB49
-:1040D000464EB833D9F1E27C2C209E31C73958F7CF
-:1040E0006C99EC9AEE1E3E8F355E77DD5B1E941365
-:1040F000238DFBF418F3881BEDA968DE45DDBBB802
-:104100006FA38BD3F5142D2E95A23DAA2F5C04F539
-:10411000CDE364B28798F0FFBAAFE5E7890F6B860D
-:10412000ED7EC5A6292BC96EB8C9AD0BFE02BB70CA
-:1041300042EABEC501AFF9821B9EABCFC148600FFA
-:10414000BC971BBE11E9A231F811D951B716C93A73
-:10415000D2D78A3D8DB4AECDBACC1268F7AAAD6481
-:10416000A436B15613CF03305113E96E0EBC91E95A
-:104170005E44F25027C039675CE1A46D507317B5F7
-:10418000521E4BA321911F761D6006E5414B7144E1
-:1041900095AAB0DFFC77D0EE9B132C95D1DFBF4EF4
-:1041A000650D5A9A7D0E76F13177DABA4E8CDB13B3
-:1041B00094AB707E9807E75FE4A1FB046EB48FAF09
-:1041C0004CD9C71311916976F2AFD1A8C478465182
-:1041D000E2F794E7FDFDA48CF3B21758F536E993A6
-:1041E000FBD5E05FFE12F733CE8C7E4C35FCAC7114
-:1041F00089AF6B629FC4BD95C39EC86F707C2B1E38
-:104200003051E3F79B37B7B0702C2DAEB2F9F93FC0
-:104210003F8EF6AA157F39977727E0B4E0DE24B108
-:104220002CD2F39EE81FDCE97E314B96CD9DF0F950
-:10423000C19D215FCE570BFC3456F04F5E6D851744
-:10424000E5E658CCF7C17D68E7F2C484FFD2F37D80
-:1042500014C17CC1706BBF6C0C974B8AB837057466
-:104260002DA11DEBCC075230EF67E270B97140D041
-:10427000FF251E91FF33994DE67EB8FDFCCABF9421
-:10428000EB7DD69A97F11EEAF785DE7F51F8950906
-:1042900071AFF1A8B8B7F8F23A83FCBC57D65552C3
-:1042A00039B02E4CCF5F5B574765EA7E159F375F6D
-:1042B000D8612A06D5F09CDFC7E206C0EB1FB566C1
-:1042C000A014F9BC8EDFEFEE6E3AB5A59CEC467EED
-:1042D0006EB1B9A83A5188FE0BC09A0F7597AFCF4F
-:1042E000C3EF79998395055CCD21DEFFABCF2B9C85
-:1042F00074A15BFBEFD86F1F6B6528EF02A67DBF33
-:10430000B3C34EFF86EFBFABE8E2F6BD17FF01FB7C
-:10431000F8256BDFAF6657F3EF335C9C3C463EAA53
-:104320001472600CF0D301F0E7DD0ACF57CFE779C4
-:10433000AE6688F39BA9F27A6CBC68EFE224C406EF
-:10434000F2785E7B313F4FA07E98578EEF312CF98B
-:10435000028F6FB11C91FF3E568CB35A8C3BB19AC1
-:10436000EEEDF2F37FD6A763E96349AAE7021F6087
-:104370001964AD1222730C1B247FBB581AA2BA21F8
-:10438000E959582F93C265DC0F8F93FE2C57CC6FE1
-:104390005710F223328F172517933D097A19E562DA
-:1043A0005C8D2C42F9B2A14D0B0326CEE5C9E1FD8F
-:1043B000392C37F4D50CE0F9472C2693FC519E6339
-:1043C00059FA9564EF91FEDAB03EEF6036E56B2462
-:1043D00029CF7DBFA7D4A6A726FA165EA7C37E6DF8
-:1043E00014F9742EE8CF32E49F5AF974306E49A65E
-:1043F000F756B9D1AF2DCAE4F73FEC91443C2339CD
-:104400009AE280625FE353E58CF719F779B85DF3C0
-:104410006869667B9AB10769BCFD1EDD316EB285A5
-:10442000EECFE83CBE91E53229BF66631BBFA76FA4
-:10443000E16F34D8B5680F6FEC9B3F1BF93B56A971
-:1044400052BE39ACDF87F87389BCE48DE38307B3D0
-:10445000795CA214E5743FE2AF360D7FC1954D88BB
-:10446000BF8E57797E2FE8731FCB906F68E1CFE541
-:10447000635FCCF4DE2A3B46698B32DD1B3EEAB13A
-:10448000ECF46429A7138EBFAC6BD548A6F609815E
-:10449000EF9232163D1FFEFA3DBA6D5CEBDC571908
-:1044A00021DE25F91214E79AA8713B63C3628ED707
-:1044B0000DCF5F733C9A760EF14B1C724A2A1E6C2C
-:1044C000C58D2DBDD9EE89FEA367544A5FB2EF3387
-:1044D00092BBEC05CF41DCB70CE710A73CB519CE79
-:1044E000217A2EEEFB2E6305DF1EDA72741ECEF3E8
-:1044F00057758CECABC0337CDE5C9DC5E552FC4E41
-:104500008129619CE59A885E8FF69BAB9D99983FC7
-:104510003356C46D0ADBFB14A48B20EC65A184F731
-:104520009A9231FC9EC9D8DD8CFC44B570E6AAF5A0
-:104530008610A569F9510A1BEAA7F5B56BC6E3A574
-:1045400004D64F513F8C11EF03ED337F8572734CCE
-:10455000244A79B8D02FE647FB42E0B1C0CBF976C8
-:1045600079435892A07D3098A4F8A453AE8F01FCF3
-:104570005C9266BF05449DADE2725A86FF50CFE75C
-:1045800047EC727B9CE35E74C091F792EB15F9EEF9
-:1045900096DC2EE29B3A411D9433F9E529FDEA8031
-:1045A0000F655875AA7FC0AA7F46F88010889E2D97
-:1045B00078F02A25CADD3D2EFD2B4FA17EAED7789F
-:1045C0001E99B82F972DF0EE438719DA0D4C79C557
-:1045D000C47DDD11E6DFA53933751EF9A1D975D685
-:1045E0007D3A7E5F19CA18C6E9B2C5FCD6BDBA6C61
-:1045F00066BC590EF4906D26E95E9D6E7D57C164D0
-:1046000009CCC3D17D32E5D1E9BE08C9A79E051EFC
-:104610001DBFF3A1897B7A2E717F3CDB3C4DF7EB0C
-:10462000B287AD8FDFAFB3E0CECEAA7AB3DCB0CD28
-:10463000B31EE3DBB0F6D119EFD7D5713F29DBE428
-:104640007188B4F1E97EDD8EA965B6FB75340FFA89
-:104650007182FEAC7B764EB8CEF5ABC96CA74D0827
-:10466000DBED880BDDAF7385ECED775C203FEB1362
-:10467000DFAF137818D6CE610FBA2C3B7494CC7090
-:10468000FFCE34C8F41D91DC8F92911912C52548D4
-:10469000DF5B765E1E1FEABF9D9D9767E5F53BECED
-:1046A0003CCB7ECB9D6DC7B7D3EE735745A8CFC526
-:1046B000DA79BBF01F402F0F791D765E5366FA70D2
-:1046C000CA8B7C36B8FB4A18E768ED8F14CC57DBF1
-:1046D00095CBBF7FC486F9076FCDA07DF1F1EF1DAB
-:1046E000ED9AD2AFE2F76F7EB794919D64C511DC6D
-:1046F00002E65D45F27A0ABB773D44F8090A3C348C
-:10470000E107C86A0857F171C467A617F316F29B50
-:1047100018352AAC08D3BEE3670964BAB4155351FF
-:104720008FD72356D2F034C363FF4E40A39EEFD8F9
-:1047300047FB3E9F3B077F907F4F618E61DF77CBCA
-:104740004F427316E7BBBED24E0727A4C8A0025D36
-:104750009ECE2A15F6CFA08EFAB27BAD8BECC68723
-:1047600096946DBD12FDD5A0ACF3E3C8A171681F8E
-:10477000351F35BD68E76D8F4CF78E83F70F7528B1
-:1047800061340F9F5AB2E655ACC776BBC80E7AAA01
-:104790006F5EC18A34BEDBBC7BC1C2C5F8BEC345F7
-:1047A000FA7DC59EFB064A83D8DF559BFEBDA996C0
-:1047B0008DF7E9E8B7BD51EBCD68C75C9DC5ED92BB
-:1047C0008D5A92E24F1BE7690C5DAE8D25F5A3571C
-:1047D000A0FD708D96F13EF95D596E7E9FCFD52A72
-:1047E000A17C2F8C66BE1760B51B5BF35B3AC708D4
-:1047F000CE9619FA71AEEBE7C9587F08F655975275
-:10480000F49427E86963D1BD5B2B707D0399EF1D9C
-:104810005AE5DAAC719C4E23763E7715368DC67517
-:10482000BBDC91817A24AE4259C7B888CBDD1AB976
-:1048300019EDD1AB5D48E16C73C70F1B16E1BE8467
-:10484000255D8279826A6415D159308BA13E685802
-:10485000126945BC1482FEC3D05E61D12FE99CA2CF
-:10486000B04E635EA87B96F4245CF0DE5311BD0A63
-:10487000F1FED25AFE9D97C2A08FEE051546F8397B
-:104880005C61BB9BA1C9B0115C6017F90712C589B7
-:104890009C7C64ADAB792997E3BBD7FE7654A6EF39
-:1048A000CD546495115EBD867DDD1ED4BB30CE54E3
-:1048B000737009E1BBC6CDE2C4BF6EA2EF5DB52E39
-:1048C000826BD794935F41B87EF7FB2CDAEF6B993C
-:1048D00029215CF943FC9CD59A27BF6950E1F1700E
-:1048E000CE874EBEB3F8C109DFCED9F3E83C6E33B4
-:1048F0001B9C8FF88E9D95898E3617ADF1A6C74506
-:104900005B05FDC13E907C89E98CF65BF957B61ECC
-:10491000F361377E315289FCF1B697DF5BBD6FA939
-:1049200046EB7868AE46F1C687FCAD44F7A736BAC9
-:10493000C287101C555F88FBB9BBB8228CF1B6BF8B
-:10494000C3C3E734FF60F7A82F55223EBFF8872C7A
-:104950003ECE14D51AE76744EFB55E827386D2FE69
-:10496000B31568872E912753EEF4AA2524BF5C4225
-:104970008EBFBC24AF1EFD94C00DCB1997873C4E53
-:1049800011585BCDEF3338E47EA24EDD3D8376894E
-:10499000C77FEA85BC1B7BC3F47A5C67BDD00BA6DE
-:1049A0009AF9BB8CB9A27DE150044DB261F19F5CD4
-:1049B000A13FC6EE763C177A2177581C7CB0E266A0
-:1049C000903F5FCA1276E408719F5D4BE6113F9CF1
-:1049D000017EA0B874C949A2FF18C809B49BDF9032
-:1049E00092A11569E761D677E67E22E24111B39480
-:1049F000F284DF12F1A09F8AEFCEBD23E241C745CA
-:104A00003CE8E7221EF40F180FC2EF87792FA77D2D
-:104A10001B57F7513FC67176D62CF01830CE547D17
-:104A2000F02504F28BE6A04FE4DF13BC414B0FCD21
-:104A30003D7F9C2A8170B9312EC5E17C597C8FEE77
-:104A40001501D78080EB350197A507516E209DB1E8
-:104A5000B1AA9E491E06D55609CF7B515EF407497F
-:104A60005EF03CF1E01AC998305C4EC078A3D3EDFB
-:104A7000748BFE4E8DF2111D3BC77F348BDF3B7C68
-:104A800069EDACFD2C98268F220B5721DDE5C3FE86
-:104A9000A03C8A3671391EC57B176972D58AA7C1B9
-:104AA0008E8449EFDCC0F134927CB9905C2974C8E3
-:104AB00095DD2857A0BE1BE54A305DAEB4F6E3BADB
-:104AC000832857584A0F05239F4CAEFCCC5B668B5E
-:104AD0009358F2E56A6063B213C3A04FFD9F5E9FD7
-:104AE000BE2DE4C485F4AA95FF113019E9F53D986F
-:104AF0001782FECC7846F770147390F28972DB5DF2
-:104B00000CF341B66297D1E8CF2CA47C901DF33D05
-:104B10003AD2C5C3522284F8DC27F578F9BEE8FD05
-:104B2000682F6C9BC0E3243BFE788F17EDEC976EEB
-:104B30002F08E0394E6FAE9507A22FBE15EAA71ACF
-:104B400019D1C98A3D2B6C790F3FCFCA237CE4C6AB
-:104B500040FE003E1EBE9DEB1FDDE079205066CC7E
-:104B60000371FB443C488D85903EB649510FC561A9
-:104B70001A65D253BD619EBFD20B7E399E0FF636A9
-:104B8000EC9C83FA79C3AD32A37CF1CA9E7B50CEF4
-:104B9000744C5868205FBA4697BD89E6F8069FECCA
-:104BA0004DCF23C5E304AD9A9F1B8AD2CC01903729
-:104BB0007B4DE37CF74755E1F7617FF779F2E03B06
-:104BC0007343A3314ED0DBB83084F3F68E8A84F27F
-:104BD000283F650CD9031B476D5A8CF1A78EE51A47
-:104BE0004BB79386CD17B4DBD7569C516DE0F923B4
-:104BF0001D32F72F73C5F934F05525E22D7D9D0840
-:104C0000A76AF2FC115CAFC2D74BDF37CD6D00FF56
-:104C1000B08AAF1FFD57DDA78F46F9A136F0FC9192
-:104C2000CD7E7D31FA8D4E38ACF1AFCD966CFE91D4
-:104C30006EE52DD4AFE1E788453C6FA1D775FEBC8A
-:104C4000850E210F2DBF71247CB81CE7D4BD5E7B7F
-:104C50001CD082E74A513AE118295FE0D3CE7FA108
-:104C6000757FDEF38D9447B0265BB2DDAFC8B5F239
-:104C7000591AD784504E58F06CBE40FEC8A785AB79
-:104C8000B991B7FFBCD7FB3F6DDCFA6CAE1F814F0B
-:104C900007F01E65C7C499219443A978CCD0403948
-:104CA000DA73E23EA3953FE2D2F93F55957FE74E96
-:104CB000CE2EA2EF2CABD379FE08FD65C803D9C474
-:104CC000D86CF4775411BF71F2E985E077E68DDC9A
-:104CD000EC137E63D4319FC813618EBC1335C4F3CB
-:104CE0004BAC7C922E09D6174CE5838C38AF036F02
-:104CF000E385DC7FCFD17FD8BAC3FC7EA5957F3218
-:104D00002C8F64AABC1FB760581E89C847E9C935F3
-:104D1000E23C4F9CE795A0DAC478DEB03C92A9D380
-:104D200043F84DC96925A2DF0D8CBEBFDBE3E5F575
-:104D3000DE392C8EDF3BEBC53AF2532DA3BC9661D6
-:104D4000F92553D7109E341659C6CF77F879BF8509
-:104D500007677EC905E9ED027924419FF53D8A0880
-:104D6000CDD3E30FFFA48EE093E93CBEE04BC7C375
-:104D7000E9E35FE2E372B247E4E1F5E4DAF3F1EE8E
-:104D800013FB5221DA39F7572FE274DD55AF53DCAC
-:104D9000DDDDC0E395C3BE035163F7079CF1BC138F
-:104DA000425E5F68FDCEB8DEB611EE9B2DF0F13CA1
-:104DB000AE87961CA2BCD833AB40CF02BE1EC67CC9
-:104DC000969A8BCF67793D8BE7B3F41AF50B2F4595
-:104DD0003D16D518CAD35ECC6781F71B1A46C86743
-:104DE00011F1442B3E3A523E4BEEB9F3787B3E4BE9
-:104DF000EFAD3C9FA5B787CF638DD7DB504D76D6FF
-:104E000048E33E3DC6947DB8FF1517777E3AAD2442
-:104E1000F26798BFD253AAE90F1A482F9C9EBB1A7B
-:104E200035A2EF2E17F76363A3B9DFCCD4786821DE
-:104E3000B4D9E24F2CA278B2C8CBE815F7E7FF3E11
-:104E4000CBB0D9C79D8DDF0DA15D0F74F8B2CEF93F
-:104E500084C6C9574BD7830DC8DC7A8B893EE540A1
-:104E6000368F23B842C706EAD2E8748BD077881F02
-:104E700019F0932B9DC357542EA0E83EFDAD11F4BD
-:104E8000F946369FDFA243A64E0AF3F33F568172DE
-:104E9000C4F25F87B5F3F076C3E48F438EF4607E8F
-:104EA0001B562C797283254FEC7469C90FE6903339
-:104EB000E7E4C91C6EA79F9327203FF053674E3944
-:104EC000D4EBE5FAC282C78D8219E4C87BAEB02D5F
-:104ED0004EE3943B17E2A3CF5BEEBC949D2FEC0F07
-:104EE0002E7782481BC837D9D63922BFF77066EAB9
-:104EF00083240F3D2A5FB727C2E87702B08EF2DC29
-:104F000083E72819E57AB544F106712E922FBE3F4A
-:104F1000F8B02B4CF9690F033FA39F37C170DA67D4
-:104F2000E73F57709E273DBCF66BDC3F037CA3DF59
-:104F300075B172C892131F66F3759FA32F93C3694F
-:104F4000D1571A3DD3F7052CFAB5C6B5E898218399
-:104F5000169C875E055D63389AE2D431298E711004
-:104F60002B8FCC1AEF0D1FB74746BA5F65B5FB8E86
-:104F7000E5779D8B07EB019DF2C97AE8BE39EBE23C
-:104F8000F43787ED56D754513E81CA289F2052826C
-:104F9000FECC619FDD2FB6F2C1A69584432827364B
-:104FA000083BDDCA23B3F2D20EFB72AD73665B7EA3
-:104FB000DA8611EE67BF790E3F17FFFD13FC6EDB3B
-:104FC0006AAFF938CA45C09729BEE7447968D6B8B0
-:104FD000DF15787ADD633EE9FB0CF7275FCCB2E79B
-:104FE0005D75FA0C475C80E375A21EABA7FB785198
-:104FF0007EAFCA79AE3ED2FD57E7BDBD73F75FC540
-:10500000F97BB327FA32C1FF22CF7FD3C3D1839D6F
-:10501000ECF35BCF01AFF9131CBF53F0F7B420BF23
-:10502000B7F3BE27FA363EBF8E71BFDAB2730E6396
-:105030003BE8EF7F19A436D0CBA65A4EAF45958CEE
-:10504000BE3F3EBD95D7772CE5DF35ED7F9DDFFB7D
-:10505000D816E5DF33857E7D32E065C778AE0FF781
-:1050600057F17EFBF17E13F26905B7BBF2307AAFE0
-:10507000A0B88E5239BDA6C73B01DE1F582A535C2B
-:10508000748FE08B003329CEB1AD92CFB3AB427EAB
-:10509000427C8F66D12D50EF9CBD7232DE2FD92E0F
-:1050A000E229FB16AF7C02F3FA3E08940BBA4BD010
-:1050B000BDD79EE3B7517CE4A12579D24A58E3BE1F
-:1050C0008399F35BAAFCAAE817738B789228131ACA
-:1050D000965B4D91B7DACAC4F7D8631AC69F9E197A
-:1050E000E479ABDDAB9F393613F571A54C79665D7C
-:1050F0008347BD97E1BAEB785E4F919A90D2FD1746
-:10510000AFDFC5EDB49AA31EA36A78FB67068F12C2
-:10511000DD6D07BC2B69FE9F2CE0EC467F02FAEDAB
-:1051200075F50CCC84767BC7E5493123D56EB49FE9
-:10513000F35FF712597C879ED1771C3ACD531E94AA
-:105140009B9D78FE01EDBB6BACBCD41EBA97B577C6
-:10515000CEE4399827BEED061E2CED0A1F223FB97A
-:105160006736B7CBF64AD00EF6655F8B763DDD63CA
-:105170006AE571222833C6897A311118F12ACEEDF9
-:1051800028F505E6ED6CE81BC0798AEAF8F72D8A68
-:105190006A32F77F21E0A6FEFB5C318A7F8EB47F06
-:1051A000FFEAE3F8ECACE2E7058CC5292EB55BF825
-:1051B0005D4C8D1AE9DF096D0970FCEC743113E365
-:1051C00065BE3A8DF4BA1C36C80EF583FD88F1B879
-:1051D0006D526C31E687C42669EC71C288E91D877F
-:1051E000F1BB097961A4BF4D522284DF558E8DE356
-:1051F000F1EDA3919D74EFEA00D8D1140E6609D2A7
-:1052000053DDD13CBA0F7534523D48FD7D15BADBF4
-:10521000D22898374F1F8A646CD2659BB6A25DD3A3
-:105220003945D6316FB353AA8FE278B15C0FC5917F
-:105230005D53E6D1FEB946E549E9FAE8463FD70BAA
-:105240002727446EF4C3BA42534EE562DC727BED0D
-:105250002BFB70FF1EB9DF4374F448EDE0DD38CF5F
-:10526000FEB3571D8F125FF2F3BA476B4F97A2DD63
-:10527000B3ABE9542EE2AF18E373A00F8B2B781C6D
-:105280000D3520D9676A0FBB19F058DCA631234DC4
-:105290001F7B193FCFC33FDF64927BF4F7CCE0293B
-:1052A0004F0B8EB784252E0DD0730FC6B32C3953F8
-:1052B0005CC71205200FF7AF78278679728F4C2CC8
-:1052C000A07B9445E23D494E18AF448CD7FFC62BD6
-:1052D000EBB1DDA3D50506CA8BE281A179A8248AAA
-:1052E000AB4E539C2D64DDFF881AFB6F25FA94E9C1
-:1052F0003B95C5E177FE02D711F0F5919E83F61438
-:105300003773AEE3E309E67D88BF6F4AADAF8E0B1E
-:10531000A6FC31FA437EBC97DFCB2ECEFA87B94A82
-:105320005ABE6D89880B6C920667935DFA00B7C30D
-:10533000C7B238C9B9E2AAD8DD3CDF364AF9B6CEE1
-:1053400079B7FBCFE95789EE51E737897B25FC77A1
-:105350006C4AC4EFD838E93E14CAAFEAB82A55DF20
-:10536000173D45F4FFB466DC95E97B0FFB845CD800
-:1053700024FC316BFCB1B97C7CABFEA8CEE9F1E931
-:1053800097F3AEAF82F5FC555BD9248C7FEE18C144
-:105390008F5B19E0F4973D00160EE881FED75EF3AF
-:1053A000623ECBD3325B8572AABE2AE14956093CE4
-:1053B000C2F8E48BC1F807C2DFF6A05CFA6AA092DB
-:1053C000E05A3195C70D3AAB1EA473A090CEF50EEE
-:1053D000F227CA775F282661DC7B790DD30F8978A5
-:1053E0004B0CF04F77E76596CAEBDF9E4B7E0EF0D5
-:1053F0000ABF5783B94993C5EF4F94E339D1A6BB90
-:1054000045FEAC8CF8EE14F300DFD23C078AC438BA
-:10541000F771FB1FFD0BEC5F2EE629AFFBEED750BB
-:105420008F17E99C2E52F0F57908BE5699117C6AC7
-:10543000E255F443B74F2A30906E0E84C26F374165
-:105440007DF92295E2F1E5351C8E03AD32FD1E900B
-:10545000BF4E3B48F7C74CD01769F832C4BC45353E
-:105460000909CFB58C56BE2E68E745B96884011E80
-:10547000A81B625DE7E09FA411FC459E41CC2D3A3C
-:10548000878795381ED0EFCA3ADECF1FEADB8272DB
-:105490006C791D871BF43BC15314D60EA2BE2F0A94
-:1054A000F1F196037E0E4929B8B22DB8EA64CABF5D
-:1054B0002AAAD10EA21F9C2DE05B19E6F0F4BF7E54
-:1054C0006A40E2E319385EB680375BAC9F12760B18
-:1054D000847E80F19E7225EAF15ECEA929CC38C483
-:1054E00067A37896F57E572BE001F0E317F3B0DD64
-:1054F0006EE2275862EC6399FF7E889116B7A8D8B0
-:10550000ADD9EA7EB17FAC8B3F273F8E5422AFCB23
-:10551000C2AF5B5965EFC76AD2EA6578BF8CD3FB2F
-:10552000FA6BF979C78109DC3E42BFE31C7F239DFA
-:105530004F311EEB0AE27B8DF45D49BB7DDCE2D688
-:1055400082E9281F8A071E9E27C37A8AEE65B292D7
-:1055500043F42C9D937F30DFB7D724E8FE6CF640F0
-:10556000240FE55D496BDE74FCFE5BF64094EAD9DE
-:1055700003AD26CF3F0317260FF3F5D2E6294539B1
-:10558000CDF3E958ABD68772AD361D4E785FF27217
-:10559000CF5CECBFF9EE574623FF1638FA7B72B8A2
-:1055A000FF50FC32B40AE0FCA7D7627B2BBE938D80
-:1055B00010E751F93296C53E90C7509688FC3B4B98
-:1055C0005E744E786752D427E887F2F15822DDCE18
-:1055D0007796D07EBC681F93CEDBEE34B51B29DEF8
-:1055E0003410E0F1A680B0577B98B19FF47B0DCFCB
-:1055F000F7F0E173D01F7D3547A7D37EF6B130D2E7
-:105600007371DB9FDCE9F2FAE640A9B8079D20BA86
-:10561000D74AB2E87C0FF898BE6F7A406DA573D672
-:10562000BE227EAE7974CE2B12E2B3E8399EA76D0E
-:10563000D9CBD36B12217CDEF56AF432E2CF11ECC8
-:105640004FCBDE74AEE792FA07491E8C8D322F9E47
-:10565000AFF957AB94C75A1205B8AA502E00491794
-:1056600002FC35B1F548374694D78DD5A25C05E5E7
-:10567000D560DFAE1B28FFA52B35EED60AB06BD167
-:105680007E1ADCEDB901ED9556B0460CB4174F7992
-:10569000F07B2ADDADD3F311CFCF442CFB3221E1D7
-:1056A000F8453F35C95EACD5351DE33013DC89D1F3
-:1056B000E9E77407E6BC534DDF139B7F71F9642360
-:1056C000E91384454ED323FD554749BF3CE11F4FA5
-:1056D0007AC8D22B961EA11141BEDC22F8A8CB4875
-:1056E00078249257C0BB00E72D2847808EFD455C8B
-:1056F0009E831CE672CED2277773BD6FC9CF0A3165
-:10570000CE2D286FA15F77ED13B937A05C1172D64B
-:105710001F3266E2F95C8590AF4C8D4938DF8129F4
-:10572000FC7B9501873CAD68E5E3748518D113E8EF
-:10573000A1834837078A12744FFC40EB5129FD9E24
-:10574000A9A5EF02AD4986FB3FAE8ECBC17142AE3B
-:105750007EC76F70FAF470B97A4EEF0979BBD53C09
-:10576000CAC4776133E661FDBDD0E73D1587C82F18
-:10577000D876EB29C2A7150F0D89786877D55BF429
-:105780007E7B94DF03D8654E9F43F047966B947FF2
-:105790005A73744E19FA1B4DCB35B4EB4E060AAC56
-:1057A000F32FEF42B4275B5791FDEB13FBF85098B2
-:1057B00009BF53233FEBBEA5DF1EC0FE21F08B24A3
-:1057C000031BF579DC48E7F83D05C47774903AFB94
-:1057D0006A0CFA0E84731DDF0BF0EFD2FAA3C981B5
-:1057E00071B4AF325DE9F1D530F23B97835F87C387
-:1057F000EE56C3DE09F07E7793ACAF67A9FEFF2BB0
-:10580000C0F3D126FAF93D859D8B4F6FC138DFCEAD
-:10581000A5E23B670EF8EF6BECF328340FC60428C3
-:105820008F39E3F7F6ABFC59FCFB0B357D0368CFF2
-:1058300007AA385C2F060C8EF7418EC79E884C7CD9
-:10584000B46BB0DA8BFACE69373E92FDEE249ED768
-:1058500062D73717AA173BE4FE0477DF7524EFBE43
-:105860002993BC628CCB3B89C906FEAE464B80D3E4
-:10587000539590D71DAEC47ECC2BE878D6C7D61BE7
-:1058800029BA28126376B6CA197F3FED5040E1FB72
-:105890003F7CDFB9FD20F6FD4981870BED3F86593E
-:1058A000D09EEE8B6F1A7307CAF156EE3FF725DED6
-:1058B000A2BCA3A2D90BC9EF3972F052F2078AAA8F
-:1058C0004CDBEF6B668FE0B756E478CE1B0F1849C0
-:1058D0001EEF5BDD417EF6BEC1CCF7620A72785ED8
-:1058E0005A1FC84BFCBEC948F3EB399CFFFE292068
-:1058F000E86ECE3BF4BD8C343DFBB2D0B3A46F8BCD
-:10590000551653D2F21C2608FC39F52753E39E4B5B
-:105910006B88CE097FFBC4F9C543A64C78B7E81C59
-:10592000CF0F10AFB00E53D0219D6FF4B0B807F970
-:1059300026D6C4F33C9C704FF0CB17B5BE600EF773
-:1059400043CECD27FCF5897E0EF7CEDAFBE99E2308
-:10595000CC1742FA907EF01FA7E93ED4B32EFA3D51
-:10596000DB19CFBA1218D3BAF320FFBD45F9452F82
-:10597000C1F9CF87F9F7D5137E6E8FFD5AE7BF5770
-:10598000F455F760F717A03EF4ACC2C89E8C83E2D2
-:10599000027A3D2DE8953DC7EB2BBDBC7AE7C1FEF1
-:1059A0006538DEAAE7781EE69DCFDF76E317A07E96
-:1059B000DB808BEE0CDCF9F87A6D0CD46F8F4B7DAD
-:1059C00058FFCD7446BFF719CBD328CEF59BC060E6
-:1059D000C102C0F707EB3CCCB80CE3A48305F3018C
-:1059E0000F77C49F9E89FDEE784A0A23DBCE78F6B6
-:1059F000F15746035C777E43A2FCAFAF1CC9B6D912
-:105A000085A76129D3E0FD9A83FC77236F633D333B
-:105A1000111F773EDE4BBF7F68E1F3837595CC485D
-:105A2000FBDDB03BBFF134FD9EE15DDF92E8F71591
-:105A3000EF92F93DA27F7EDEBBE8311FAE6FBD76EF
-:105A4000A91FD7B559C376B7C55BBE8B294D77C49F
-:105A50000F6A33E1FD1D070E6A2BD12F73B366D495
-:105A60003F5F3972854DEE9CDEA7907FB026D7430D
-:105A7000F7EB99CF0CCD9B307C9F3F58C76C70DD06
-:105A800061C509D4B83637ADBD4BE7FEEF578E2858
-:105A9000B6792C3B20768CEB85D8DFFA297E6EED2B
-:105AA000DF1AE1775BFBB7C60AC4AB439333C1D3BC
-:105AB0008DFB01F0F4ACD3A9DCB92E44E5EE7506FC
-:105AC000EDD35EC423945D02EEC054568FDFE70F22
-:105AD000983CED38AFC9ACC7BB6579115E2F581241
-:105AE000253F64243BC62AF7BAA22DE84376EEE8A8
-:105AF0009FA582DDB3578BDE8D912FBDE3D5590D68
-:105B000050FF9B9CC8C61C92376103F9CEF2CFBFF1
-:105B10009EC3E5EEA6D11AE17BEFD2C98F2996FF8D
-:105B20008571BFA52B9F407B02FA6FCF21BE0DD39D
-:105B300077BA46EA5FB0ACCED6BF60D92AABFF1EBB
-:105B4000EAEF397FFFBDCBAEB1CFBFEC0EABFF2389
-:105B500004BFEFFCF017344FB5CFDFBC9AFA7FD506
-:105B6000CDF77728D743F9F41DDE70C245FE33A385
-:105B7000EF73A879971EA2EF279D8B330D9AA86724
-:105B80007D4FE556A31C4BD1D1F46FE23AFCC05DCA
-:105B9000E97494539765E3AB5C33CF56CF9F3DC612
-:105BA000D67E54A4CCF6BE70D1E50EBAF4E99407C3
-:105BB000CBB83E3531CE09706A63F8F79AEAC778F8
-:105BC000687DF7BFE8A5FAFDD7F0F5DD3FC6477C55
-:105BD0004CBA0BF6FD7E2D7A65BA7D0CEB9230E463
-:105BE000F58C1E1DC8A94D7F6EC8F83C4BE1BF6304
-:105BF00097E5E6FA7273E9E4C76269F8DC520CF4DF
-:105C000000F5B773345B9C6773F1CA504BDA3C9B69
-:105C10008AB54587AAF8F35BD08ED7237F87F37DBB
-:105C2000551BBA14ED57E73CEEB23ADB3C9E925559
-:105C3000344FD2318FBB6495631ECFA243E2B99833
-:105C4000E714D2C948F36C2EBBC6BE9E923B689E39
-:105C50005FE33CB569EB29B9C3314F165F0F3C17C1
-:105C6000F3FCE6BCEB299F6A5FCFD8D534CFBF3BAE
-:105C7000E6718F5DED98C747F3E0739C8715713F20
-:105C80004A730FADA4FDFF8197611C487347FF9ACB
-:105C90002EA9FCBD97E2C2D0CAC476FF07FE2263DC
-:105CA00096008000000000001F8B0800000000002C
-:105CB000000BE57D09785445B670DDBE4B7727DDD6
-:105CC0009DCEBE10C20D288B86D88190015CA6594E
-:105CD000E4A122065770810E4BF6A4A3E23C1C758A
-:105CE000D2104554D446518306A6C1A0E0800626B2
-:105CF0006880800DA883332E719EE3320B368804B2
-:105D000021260DA2E29BC5BFCEA9BAE97B3B1D604F
-:105D1000DECCFFBF79EF8FDF4C51B7EAD6AD3AFB4F
-:105D20003975AA9A0C4F22641C21FB12683986909F
-:105D30006FE33C17396D84FC007F3F26F4CF474862
-:105D40002A2FD3085940F85F60A9408A08A9B5B046
-:105D5000EAFC4D33721643D93629A3A490FE63A5FD
-:105D6000DD75BE4A4877DB24655E5E643CAD5CE071
-:105D7000978F8486B3777F2091EFF82692E175F4B0
-:105D8000FB65094E9C8F563F524FEB66420ED51372
-:105D90002C3B6532A7983E3F5C4F27304C3FDFC518
-:105DA000F8DE1189FE3385964D42C027D075ADF8D7
-:105DB000402643F0331F0EA7EBB8912F63813F9E1F
-:105DC000104B641E5E3371C37BE1EDE6C03A019E69
-:105DD000BA07983268D1984C8836DFC184FC69F7DD
-:105DE000D56F090EAC0E308D25E4E6655BDE846E62
-:105DF0001F092503EFA0EB9DD9BA421E40EBDD72CF
-:105E000068B6CBA61B67A67C08D66DA1FFC138B3C8
-:105E10003CB4AEFBFE2DE5C6FA6D448AD47309B9D5
-:105E2000D03998E3837F570DC880AF1BE99A322998
-:105E30000A6F837214343B115FB39DEC5D6D3EDEDF
-:105E40007B641284F948A15492072DA9D8CF03FD91
-:105E5000D4BEF39B2D5BDCC5149FB3EF16118ED11E
-:105E6000F30DED8E779BF269D9F8B54C069F7DFE58
-:105E7000731619DB898F7D4F83AB460737CD9CF0B6
-:105E8000E4611D7DCCF25CF1E461039C6618EAB725
-:105E9000D5CD32F49FB3A8C4D05EE2AB30B4CF5BB3
-:105EA00076BBA1BEC07FB7A17F59E362437B45E0CB
-:105EB00021437BD58615867A4DCB2A437F6FDB5AEB
-:105EC00043BB69F7886B088563C3EF4462A670FC27
-:105ED000C676E4B18B53A0945C00F7A3F51948D7BC
-:105EE000C7EA552C6B81F6C601FF8CB678289EBC9C
-:105EF00071E1529248C87DFE4B962DBB84D615DACF
-:105F00003E9E52BB7FE2325F3621CB9C2AD2BDD867
-:105F1000A8902025558124F5D27558D4B587CED2C6
-:105F2000DE2891E0E8BEED6228F6F31E213C348BBA
-:105F3000AEC3F7A999AC17FAF279842FC90092D1B0
-:105F40007F7B978994B7E8E4CE7AA709E793EA9C28
-:105F5000B8DE49E9A15A61FC5EBD35732271403D4E
-:105F600038B4CE7686EFB5D0C9A4C3388C5F2A0288
-:105F70000322FC8BF81B62E0FB61099E6627FD5E35
-:105F8000D71E7126CC8304F7E55C3712BEEF5E0F97
-:105F9000CF491B1D2493F277BDFBC9C3E713F24918
-:105FA000FD542C7F5F5FFCE46199903FD6CFC4FA2B
-:105FB000817A0F96A1FA722C0FD5D761FBE1FA45D1
-:105FC000583F52EFC3F268FD322C8FD5FBB1BDAB09
-:105FD000BE11EBDDF5012C353EA0F2684E31F069C3
-:105FE00071B109F8F40E2BE17FAC7E92AF41A4FFB2
-:105FF000EE40BE7665005F9FB47D3B348BD2DBC93B
-:106000004F2831E5F60FA768BAEB1F7F6E13E0AF9C
-:1060100034408927B96FBB358EE1C76A2253099591
-:106020003F0F9DAF10897E3FEEF50BD789B9F85C25
-:1060300002D2A18AC335C31E63FCF308E2EB6C787D
-:10604000D2FA1F79F6CF4573F3003F83914EE2F603
-:1060500089750C6FCFBB006F67839FC4F92B1A8EB5
-:10606000C2EB7FCA09D1FE5FA56AF0ECC821B4BCBF
-:10607000CE597C14E8E064AB19D775B23D3E406060
-:106080000C670AD245FF7063F3A8DA60F5EBE543CD
-:106090004D4BA2DF282F32FD7A797172FFF30EE0AB
-:1060A000FB3B3244FFE1D1401F6E4E1F8CEEB4F13A
-:1060B0006B5A72FD36C338C6FA49BF30B505E5BC28
-:1060C0009A70FDC8FEE779478682DF39B6614802DB
-:1060D0007CF758BDC50FDFE9AA77FAD97733FC7A88
-:1060E000BAAC5E14EF3F9C1C995F7FE3FEB3E747B9
-:1060F000482BF9DC4210F43F0CE9BF7FBFF8904E0B
-:1061000029C5401FEDF2B7A077E2866B7A47C2BA85
-:1061100036AEB745F4992F82E79B0CDFA3EFA94772
-:10612000343C0D3E13DE2572445B27959323A9EC86
-:10613000063AA5C48C78F6D01113E8783D926D9993
-:1061400040BF634E54B1DD0B1FA2F4546309291EF6
-:1061500015C1DD0176D6DCB11ADFAB37FD8192DCEB
-:1061600097BF91C9C3D0FE173A3A6D9779EB7C522D
-:10617000EC20F47B735BABA6819CFCF2D5ABB89DA5
-:10618000E22F82757F454C53814FBE22BF758CD65E
-:10619000D965D3131536BF654C3FFBE87FB03E6A27
-:1061A000A719F47559A3B15E4AAE4D037E285D2947
-:1061B00093009D7B05E87B6DDD94EF2F4B64765C4F
-:1061C00019A95B0A76CAC3329909F89EEB24D2005A
-:1061D0002A276A5E5B5D5442EB37249A90AE8E515B
-:1061E000FB4EA572A82289D931952901C54DDB3F07
-:1061F0006F1D7DE3C504DE0F2C05B9E6B313D77A16
-:10620000D217EEF39619E777B6F947CF979025386E
-:106210005F6D1EDAB8DA3CC40D823B10C39E9D97B9
-:106220002844EC645ADE9968B45F17415D67DFDE8D
-:1062300017555F1255D7E844E674624EF42C4A4C69
-:1062400005BA084F413B8D50FAC88BF45322FDEE3E
-:106250003B533F33F413B1DF9233F5B346C67B3083
-:1062600056BF9AD736BFEAA3F454F9CA530E42E593
-:10627000F997923FCD459F57AF7FC001703A2AF9F9
-:106280001C80EF2F03E2D458F0DADD0B2FB74D005E
-:106290003F02499BC2FDA547A6839DF4ED7AD9290B
-:1062A000D22EDE0DE6A099D26F6D6BC534928FF5BC
-:1062B00083ACFEE00911EA6D467C56BEF8549A6A3A
-:1062C000473C307B9B04D1EEA86DFE620AC8712F5B
-:1062D00009231D46BF07DF3F9D847C5FA224F46D28
-:1062E000A7F3443BD9CBF9CCDBFAC809D101E515BA
-:1062F0009DC067DE283A2AEFD52F21A598CEE795D5
-:10630000447BCA910B69F547E447200F34B89000ED
-:10631000B32B1A363E937F90CEABABF9370E214F9D
-:106320002F47183D9E6C99F7F31D6AFFF2A69BFB61
-:106330004591F702F89EDAC6EC20D2CECA6A39E857
-:1063400000BBB37AADECA2944AAA373FFFC2B3E0D8
-:10635000AF7D6A467FAD6AF39B1F8DA7F5AA2D72AC
-:10636000CA34B61C9B9016C18F97FE6FD1A8083E09
-:106370002A7FF9A6A28E64CFEF4D8AE0A56ACB1ED4
-:10638000858CEC0BC7492D7B94902D067E5A0E4EC2
-:1063900001BBA561E3770AF85F5FEE16487A6EDF0E
-:1063A000F7CBD7BE897A11E084F8E4F8EAC55F1F1D
-:1063B000BC05A7EF28C47E4E909767C39B9FCBE98F
-:1063C0009AD7EC2491CEA3FCF7E6C034C0E7CB7794
-:1063D0003A603D9D521DA3F3D50FA4B9E9F7CB65F3
-:1063E0005F9A134BF6BC7CCD5D487F65425D9A1386
-:1063F000F9C99D6942D9EDCB84752E68BA01D75988
-:106400004A3C4887E5ABC5E2002DBF91C8D42D3189
-:10641000F8A42889F149E73A8A5CBACE4EB0FBC1AC
-:10642000DEFEAD18588FFEE9ED04E4FF5D7CCD542F
-:106430005362FD1B0BC3972DC9A4F98B1603FD36C0
-:106440003FD801783A36D09D0EF3A470F071B809A8
-:106450003FD071C50F2E4F677822AA54C4DFA3FA2C
-:1064600060123C87FE1DB2DB9A6F788FCB4FF6FD32
-:1064700085FCFB74DE71A0DF3AD3A87D1F637D73BA
-:10648000617DA817A99ED3D1998EDF19FF373FC42C
-:10649000F85DE3FFC08CA9D07EEA43C647F01EE852
-:1064A000133AAF603AB6EFB95E40F96026C1587C46
-:1064B000DE2C733E37B67B29BF429C40A3133A7F44
-:1064C0004948D0D30BFD4E12E201FD95D295F47DE3
-:1064D000BD7D03DFC57E4AE4B94EAF9471B95090DB
-:1064E00044E5417C441E90A6D473B223AB65E2031D
-:1064F00093B3FA5333FAE3D59BE56258FFF14DFBB2
-:106500003EBA99D2F9F1168D6F8D72359A6FCBB76D
-:10651000AE17804EA3F9F67839D5E2B1F8963E8FE2
-:10652000C9B7E5A1FFA7725583DFAC24A33CA5F250
-:1065300071109810FDC1315A3E7E03F6566A5FF91C
-:1065400048FF3E24457DE950A33F8DEEA80537085E
-:10655000E47A2F7D6AF4D74B9F1AFD45AFD708BF69
-:10656000E8F6C1E023513A29DE4E2D3A8ACFEA7689
-:106570002160463EF7BD35A010E1E446F546FC6FCC
-:106580000D48D1D70351F596A8FEEEA87A71547F35
-:106590004F54BDCED0BFBA6D9F4210FF41433FF371
-:1065A000A2E7C8E731FC414DFF785B4F283EA08B46
-:1065B000ECB002724F5E424D3788AFED1231BED65D
-:1065C000A3861D49F4F90356E6A7F538793D91D520
-:1065D000C3A9CA52907BDAF3B095A07FDE531C7634
-:1065E00024EAFCFF83EDA243A5EDA10099AA8F2325
-:1065F00044E6D380F80E91FEDA59DCB027CE918FB5
-:10660000DF8BCB0900FD5D2EDA721681BFE7175DC7
-:10661000947CC8FCC5373908A5B39EF621D7CCA415
-:10662000CF17BC2D82B94DD1E3963229DDCCE3746E
-:106630007C94F89EBE84AE6F5E3BB3C3E72F8F4D54
-:10664000F795BC7FA96DA102F295DAD187F471D1DB
-:106650004AB21CE9AEBC29EA79FB55C81F9551FC2A
-:10666000E1E1FEC32E8D3F0A4801CA174298FFCBD5
-:10667000E5F2E562DE3533291E7AF68BC4AC823F43
-:106680002B92A5B0CE4D4200E205C4978A7C564BB2
-:10669000C2280F353875011F0DEB5F4E756DFB532A
-:1066A000D13D402FAFFE21FF395A76BDFAE9D09D8A
-:1066B000507FEDE39C3F90BEFD27EDFE7E36E8B3B4
-:1066C0009EDD668C8BF5ECFE55CE3D50DF61C6B885
-:1066D00058CF12B31BF8C0B7DB1E381FDA0732FFE2
-:1066E000A161D777F921D4AFF723DE8E2631FFE5FC
-:1066F00064FB9F0F082950D25581FDB03B1EF9C89D
-:10670000BBC38AFE7ACFAEEF8A3CB67FDE7A6A15CB
-:10671000E2417AB493995B817E1359FCD8BB73DC58
-:10672000F38BE9F76B5AF728F368FBA4D7FF9A0FAE
-:10673000F2B3672BB38BBAE5D01AE222E4EBA4B232
-:10674000876488F301336511F278F2862B7C79B186
-:10675000E0C2E0D043E100EBA2702907B9DF1F3CA3
-:10676000E29215A4F77F3D789C98CDE4DA8F08C4B7
-:1067700085227011DCECB93D601170FDECF9EEEF93
-:10678000F241EE1C6F598CF6CAD9D63D22F95F95BD
-:106790000EFEABEB1682E7B2EEA9FFB2F866F4FF8D
-:1067A0005E928AF38CE683BE74FEDA4FB0FEB2DDF1
-:1067B00085F33D47FE2FFFDF86F7AD14EF8EB3E381
-:1067C000FDC1FFB1787F9BE3DDEE34833CDBF55701
-:1067D0008CB36AEB3FDBBA5FF81FBA6ECD8EFF95C4
-:1067E00049FDB080F67F9BF83F1C4AE7D994BDEF86
-:1067F0008302DA3A5120C5B1EC938F92991F385138
-:1068000030A1FF471205EEFF31BF6900B723062C08
-:106810002C457B6340F6A3683710495D09FB77BFC1
-:10682000CA99E77A187B8CFAC40375E7A5BC6EF4A5
-:106830001F9F13885BA036E8809CABF683FD9A9D72
-:106840002DA27D4B4BB46BDF704C65CFAB1583DF56
-:106850007405D1D5E9BAA6A418FDA2C97CBCCBC9E0
-:10686000E00F0BE8FC2FB7C8CE0005D115133C1282
-:10687000ACE78A4C81F875FB4793A3FCA7ADD4C65F
-:10688000D4C7D7FE5EF85952989F395118BCB21838
-:10689000E03750C4F8E159E107C61EC2AB20F03022
-:1068A000D845928BC12FA9C685F157EE57C37633D1
-:1068B000D82B926D6907F0AD44A85FCCE68FFEB48B
-:1068C000E617F70767C2FD6C897F5283BB942DBA28
-:1068D000ADC6F1101E1A3EFE5E3C68F8FB47F1F1B2
-:1068E0007BC0C798083EB24F3925E0CF49DC1F98DE
-:1068F0007CAA43C47AB64BC2FD17EE0F4CB0254AB2
-:10690000E00F5C2A7D20025F9659B657C23E82C5D1
-:1069100025205D0FEB32A1BF63291410EEC31B25A8
-:10692000AC7F60728E01437BFAC5AF1DBF9B403CBC
-:10693000D9AD30C3BB98C5F3FFF2C30F9714415CC8
-:1069400085FD95D1FF5D4DFDB1F94D241847E1B4AA
-:1069500040223E487158401775C8100F36D6E1EFF7
-:10696000B2B4C83867EBDF9F1CF96797AF51B975B0
-:10697000E87C42B643C982FD92DE6FFE513B8397AD
-:10698000F71D12188CF106B758ACDB67FBF714261D
-:106990003F5EFBE3D6D1103F9BD09397C0E469A143
-:1069A00009E8D2CBFD8293444D807C8593ED431260
-:1069B000701F71BF68F7C488DB6CE4FEF42FEA3106
-:1069C000A84C7A9A895F04BF8984317EEB6BB6C488
-:1069D000DC0F9E9B62E274C3F146FFC422D8B7600D
-:1069E000DF5F405F4DD0E3AD6BDA97527E5F3CC016
-:1069F000DF21DDFECA3F0A5FF0DF01BE1BADA1292A
-:106A0000C531E4C7420EBFE97BBFC778E705ED6B30
-:106A10004D40BF17349B0CFB93D529DCEF1A45463C
-:106A2000C1BCA6EFB5DA0B012FFB459795AECFDBC6
-:106A30007E42F1C4D8E78A86278C0F71F49752D82A
-:106A4000BEC04EB9651EC075E75716E2A3F8DDAEAD
-:106A5000F8AB62CD33258DC9B905A4E5CEFCDC7F4A
-:106A60003DF84EE8B10527829FD94C785C239AFE09
-:106A700008D2F1C90D2400FA14FC52900B273711EB
-:106A8000D4E714248F825F4DF9FDC7FA38CDB0B634
-:106A90002DBF003BA0B65D709A687BAD1452201EDE
-:106AA000EB6D4B1441EF16A8C48DFBC39273E4F554
-:106AB0003ABE78294542F8EE1BBFF316F8EED75DD3
-:106AC0000A017BC4FD46D8017AFBEBF6D1C807FD6D
-:106AD000ADEB97F5A472B20CE33079184D0F799BAA
-:106AE000E20CF58B454F16F0D7747368A12B06FEA8
-:106AF000A6A5323A3B67F916F8FF4CBE7DA8C93708
-:106B00008F58ACE3A3945446F73AF9961E4BBEDD7A
-:106B100021A8E900F73B760D4907BCDEF1B69C1AC7
-:106B20004BBE6DAE67FB7FAF507E84B2A795CAB7F0
-:106B30008B74F2AD95CAB7DCBEEFFDED5CE55BE0B2
-:106B4000BF87FF36837C8BB1DE440E3F4DBEE5B779
-:106B50001F44F996DF6A22AACE7EB0A49E4DBE09DC
-:106B6000A9D7833DBC5F76C5C7A09FCDDCFE7E85DF
-:106B7000E7EDC17740CEFD5B2ADB2F3D5739979972
-:106B8000C6F8E4AC72EEBF09CE9A9CBB631B95734A
-:106B9000B9B1E890C9B93BB6533927003D323977CE
-:106BA000C72EC2E26F51F26D781FF946B07F6D902B
-:106BB000BDEF6DCB7DE6563ADE28B7ECB2D0FEA332
-:106BC00022F26E8C5EDEFD5BAA8470EE23EFF69FF0
-:106BD0009BBCDBC6E51D95638341BE46D387AB3DB9
-:106BE000CE50DF39AE73D32F815FDE15717FF10395
-:106BF00013DB077A6F5C6721D0D72A3E1F2FA7BF10
-:106C0000EE7A1F8E3FE90DB6BE9A4D2CFE5DDBCAB3
-:106C1000ECC3DA6631A0D27F4E19FFBD02F3AFD8C4
-:106C20002590745A9F61F63F6D0319FCA24CB85F22
-:106C300034AD40470FF3C756611CBFC1EA5847281F
-:106C40001FCF978805E2F555B6295F821D5C359602
-:106C5000C5F7ABF873C2F306B43CC8D2B6DBDF1A93
-:106C600040FAE60F4C37333C4E7F5E08ACCD85FCD6
-:106C700025637B5554FEE3637C9D33C410C285BC01
-:106C80002FC6CC63782C1A1EFB393CE8FA0DF008AD
-:106C90000831E141313AAD202DB2FE8A77434B21D4
-:106CA0009E5FB14AC07D5F0D1ED1EBD4E0A3C5A7A6
-:106CB000ABF8FBDEF6DB71DF3F7AFD1AFCFAAC5B6A
-:106CC0008367D4FAFDA97CDFAB808C867C1A4A0FDF
-:106CD000283F7CBFA670A0DF299E707EBA5E1E3F53
-:106CE000CDE130DA3F61522601B8913AA09FD2C679
-:106CF000DBDFCAA4EB1FF3893A0AD4E4C5E3CD1E57
-:106D0000D847DD680DA37CD3E8AB53A3773ECECE46
-:106D1000ACBA89E8AFB7094EB02FBC412BC2D14BFA
-:106D2000E9CC4ABBEC5BF5ED140E47A719F98AEBE9
-:106D30001D0A7713F8539A1EA27007BE19DD7E0252
-:106D4000F7730B4918F74B6A1B055790AEA3B68D26
-:106D5000C14B93B7F4CFA6C7470C7A9462D1238175
-:106D6000207151440F56F17ED3CDFE8F601F663ADD
-:106D7000A5F7B52482C7E1F43FC063349E34789E02
-:106D80008D3EBFE0F6C76680A30DE0156676549091
-:106D9000EA057BA4DD2BF90C709CF4EC69465FBB23
-:106DA0000415F6137AE104F44ADBC7B4337A05B864
-:106DB000A900F7F61211EAA514BEC9B97DD709FBDF
-:106DC000977AFEADD875908DBF5A709118F4ABAD1F
-:106DD000BB3FFAFD47E9B6338A6EDFB386DF190D94
-:106DE00074BB4B607184F644C3BEA3398DEDBB6F99
-:106DF000B452FA86FDAEB765D73AB52F9F9FE6F03D
-:106E000004FB5FD5C5A546C002602F708305F3CF94
-:106E1000701E83997DA997AF9BAD24F5FAC2FEC77A
-:106E200057B83FD09F7DA3D547C2F740EEB5D1EF0D
-:106E30000D8F7C2F5ABE6BFEFED9D6959CF68FAD7A
-:106E4000AB377F9374E0FE9339D1734F0AC67F58F6
-:106E50007ED28D3C3F89CE00ED2C5DBF8CD431FDC0
-:106E6000F7231916D4C377F2BCF8CB451BF1D175C3
-:106E70007CED96914EA996FEDD25209727523D4246
-:106E80008BAFDF19F3F1ADD82EE27ED435EF26D7E4
-:106E9000C03EDD35208CE8F36B0A04D4BF1FC06010
-:106EA000E3C08EB510B79993306D1FFBA3C4C0C368
-:106EB000B4BDA0D93F49A5FC346A43A0014AD7A478
-:106EC00070CA7B00BF092201F875B8932781FEBA0A
-:106ED000F30B5220AAA867719C51FB492AF41BEFBF
-:106EE0004E4577605CEBCA49101F9DB1CF66033AEF
-:106EF0001FDE64221E1DFD8E278106D8871F77D8CE
-:106F00007D1DF05F39B51720EE5CDEBEB6C101F520
-:106F100026C1A5D2F1BD3ECF14079DD7E6C61353B7
-:106F20002E043EA4FD60186F13EBE76D165C902AEB
-:106F30005BDABE02F3714A9B05E284FE018158D8F8
-:106F4000B8010B1D7773137D9FD6CBE07D18B7F981
-:106F5000C487D7019FBF23B2F737B17DEB52FA9EAA
-:106F60000AF4DA7C3B8E57D124900C3A5EF926263F
-:106F7000FFCBDF915DD0DEBA6715EAB169F47B998A
-:106F8000B920EF8393A14E460B4EB0B749F6CDC85A
-:106F9000D73D9CAF49D74C2637045EE77E836637E2
-:106FA000ED4D63F9C1A5AEC54A321DE7BDB1A9B922
-:106FB0009026E06D3B81FBD187299C3D14CE1FF0CC
-:106FC0007C8E7D633F57423AFDF359DA10A4C3F932
-:106FD0006D1330CF610129C63C87E9E398BDF6FE09
-:106FE000A5D68040E7F5BE1CCE86E7FB2E35A3FD77
-:106FF000DBBD59C6FDE2EE81218C4F7736C904F224
-:10700000351A9A44948B9D9B981E1757DF30251391
-:10701000E0B75E7081DCDCD7344901BDD61910F0D1
-:10702000FD49ABEF4A637E0C93879ADF56EAAC309A
-:10703000E88F68F9A6C9BF1A0E87683957A3E9997E
-:1070400028395703FBCD0E288DCFBDC4C6E41FD809
-:10705000FD80F7E0F748BFB5EFC804EC7EE1F3AE82
-:107060002998B7057A93B68F6B17DCB0CF5FFE898E
-:107070003980F66AA064CE4F417E7F6A26820A7903
-:10708000F014EE542E8C3587FFF8247DFEE50716AC
-:10709000C890A174528270D6F2450BD7B3FC96C249
-:1070A0000F56A695021C2627A39C2D6B14894727F3
-:1070B0002FBE14DCD7DDCCE4B173BD4E1E152AFE05
-:1070C00052D05FCE742607D5F532E48C906D5C3ECD
-:1070D000517BDA0D7643C5F615690AEDB794E7835F
-:1070E00054EC5A914645036900BD45FB57286CFC9A
-:1070F0008ADD8273AD6E7CED7D6D3C6D1C65BB7170
-:107100009C21BB78FD1CC7D1E6A17DBF3F7B7CECF9
-:107110007F9C5E29D0F1C6BE2F6292F2D8CFA70D18
-:10712000D1EF7768A5167F2DFAD044DC3AB88DFDF3
-:10713000631C71EBE8A2750CE56F8AB7ABDB983D79
-:10714000D43AE6A05253887527F0732D8FD3D64ECC
-:1071500066FB56AD051FDC0FFC3DAD50403A203EAE
-:107160008F929C8276900AF1F1B242F67E197D1FD1
-:10717000F8AE7515E3432A0F549017B54D2BA66052
-:10718000FF664185F15BD796A09E2F1F2B126C6F77
-:107190003E88764779DBC114E057CA9F2B41EFD672
-:1071A0005E6276027F687CA7F1F1FB32CB0F21167D
-:1071B000E74838075096A6C6E45FF11DC2FCD44DDF
-:1071C00032F29D772CE3CBF7378BC8CFFB2EBD690E
-:1071D0000AF061F77AA11F3EA67C5A18E153713577
-:1071E000CBD729DBC8FC957D4D4C3E74B6323B7144
-:1071F000D26AF96AA897BD2B1316F762F6E0B9F2C6
-:10720000731F3B65436C7EEE8F7FA7CB2D1FDD493F
-:10721000E777CDCB74FE6A045E932EBBDB8171FAF7
-:10722000CB66E17A3539542AB17CA6F9FEC52CDF4C
-:107230005762796F7FF7BCA2E6F1609A3D2247441E
-:10724000A0F7449627DD2C23BD47F3E33FCA47FF51
-:107250002CBEDEC6E9489B8FB88BBD0F7965410A0D
-:10726000C75F6D7A1EF35ABF7AE9E074C073D54EDA
-:107270004ABF74BDDD9BEC2408724B0AA0BEA96C0A
-:1072800015317F9C48C1A2EBEC7AFE64F94955AFF9
-:10729000D8916E2AB7B2BCD3CA573FCFC77C9125CD
-:1072A00061CCBBF2BDC4ED4D5F281FE8BB526279D3
-:1072B00052D1FC3E219DD99F5DDBE367C23A840D2C
-:1072C0007B70BFB5B2E52619E8AF577EA4CB5A3F15
-:1072D000DCC7F451FA857D7698DF8C91FAF92D465A
-:1072E0003C756D64FC5FD92607AC30BF0D6B319ED9
-:1072F000EDDD7002F3E327BDB219E308DE36D19865
-:1073000017B9410C9A317F533C6846BFC6989F58C5
-:10731000DB5A83FB6EB52D3CFF2F2A2FAEEA955D1D
-:10732000AFFA2868AA7EF9A203E4C1B18EF50E80F7
-:10733000271D0FF30A2F3B2519F2A3FACF07761B5F
-:10734000F30D5B1EE2F986577792FCBEF986C7E023
-:107350001FA06FD2A3F2353724F3FCEE6051718C7D
-:10736000787EEFB99FCDDFAC813CF9AEADC7D7C019
-:10737000FCABFFF6F51AC86F22BBADA8A7BC2FFD6A
-:107380000EF38AB5F716A7337AEBDEF822E66577B7
-:107390007F6A467FA77B57670EE4B7756FF93E0D8E
-:1073A000E2730B775D8EF1CB85DB26A59318F25E39
-:1073B0002B813E03E790171E8D8F7DADFB300FEBC9
-:1073C000AB4FCC28DF7AF3475B6A585EAECAF34610
-:1073D00037C5CEC3D7F21C6B5BAFBBE65290D7ADBF
-:1073E000CCBEEBCD7B3C5BBEE88714AF179D03FEA4
-:1073F00036F1BCE096AB63E68B7E05FFA078FA79A8
-:10740000BA315FF49BD6053F7F16DA5A93FBCD174E
-:107410000D9E03DCB43CFFEA74F74BE9C0475BE325
-:107420007D190C6F816902D881DFE4C0F988A372ED
-:1074300018F340C2BBCC4EC87BACDCF531F24BF745
-:10744000B60F30DE4A789E7D37E9FD63F9D0025FE2
-:1074500067B39DE59972F8431EAAEAC0E73CDF9442
-:10746000D1B19687DA5FFE69289D9F1FE6E70E6A15
-:10747000A8DFC4F2D42379A9C258C0D741435EAF74
-:10748000B6EEE8F19C5C8E46F2AA63E7F96A79846D
-:107490007DF1C5F48A9637DDBD96E75BD3E7D9A3C6
-:1074A000204F8EE9736F40F838167EB5BCEA3F4432
-:1074B000E1575B5F7F7CA1F1E7D9E6FD5F85CBBB40
-:1074C000E92C9EADC1A7EB2FB1E5F4B79CDFA9DF96
-:1074D000FA4DBACEBF9DC3FD560D6EDA7C97B6301D
-:1074E000BBA26B03F31FA2F99BAEC71D2BCF5ECAD5
-:1074F00060F66F6DDB9E7C90435D7BB773BA6374FF
-:107500005DBBE920CBD3A5723BA097DB84C591A3DB
-:10751000C773F0F1BCEDB1C7F36E3A1173BC63925F
-:10752000FB2698FFB10E66471D6B11A706628C7F84
-:107530009AEBA5DE75DB15CC97121D71684F2DB443
-:107540008FFD2421054A05F37E1A16F33CA1FB5C4E
-:107550001900E706FB9504E6F300C047177F909DEE
-:107560001E02769C9C515C28AA91F96AED4A8A8990
-:1075700004F4F89782D920DF0F1474CA30DE675103
-:107580007193CF24B2349DCEEB339FE05AACF66FAB
-:10759000776B75CFBDA221CE516B0E1F00FB9DBC3A
-:1075A0006EC5B8B5B8DBEAC3B8D91A2BAE73DFB66F
-:1075B000EF5E007875FFDC4CD83E02250C2A17CA16
-:1075C00078FCA273DB776BFE0C7626BC4CBF5FB6F3
-:1075D00086F607FB7A533CFA033D5B13F2D19E7C9F
-:1075E000FD9EE92037CA4087819DF74A7AA0818EA7
-:1075F000772495D58F6C1E88E709AAB6DA31DF703B
-:10760000DFB6D76A41FE77BF120FDBD1E42B39F426
-:1076100037A87B772690B52ADA81AA5EDF56104913
-:10762000D5DB79555037E4BF10F4D3311E47E9B9A3
-:10763000AA2D01CF8FE8FA717EF665B1F332C12C25
-:10764000E03B6A4F1ABEA3B55F9F31989FEF0DFFD5
-:1076500084DDAFC0FA7B957029ABFBB318DF766091
-:10766000FF128D5E797BDF7159FF3919830DFDB4EF
-:10767000F76BCDA42E161F546708FC7CEF5F87C5FF
-:10768000BACF22C6FCF1F95D02F199C00ED8620DA5
-:10769000405CA35A090E85FCF65715B63F52ED081B
-:1076A0000E85FCF69D5CFE55C7D13A7D9EC5E7016F
-:1076B000FDA14E2CA19701DF35AF5909E427D5BCB8
-:1076C0006E77039E6B5EFDEEC8738590CF168F714B
-:1076D000AB9AD7FF1DF15F630ECE06FA0F6F3193A1
-:1076E00075B47FD796B773C08EE89283394967D84F
-:1076F000F7A969311BF6B1B5751CAB0F9C07E7D72D
-:10770000B5738B95FDC88B5D19CC1E5D91E17E3CF8
-:1077100003F9DAE644790DE389304EDB10FDB9E672
-:107720004A35B61C6BCA900DE768C5C839C526181E
-:10773000F72B125A9A455152238471FFBC72C389A8
-:1077400091E00F7FF6B30B715FEB33253C12E4F64B
-:107750006739E1917A797CB4DEA24A32C625B0EC71
-:10776000597BA2348B40FEA075662CF9B439231ED8
-:10777000E751796F7CCCF3A03B38BDAD061A4C6560
-:10778000DF853884F6DDCF948002F3C8CB54B1BDD9
-:10779000323BA0C0F3AA0DDB8718EE9D90FCD88F7A
-:1077A000F217C2A382AC540A6D7DE54AC5229B2A1A
-:1077B000E1F968E93F7BE94D8CE009839C90A7C61D
-:1077C00071483513C641B5F300925C6C017829A469
-:1077D000D82989806A3FF2691C69C1D246CD11A6B9
-:1077E00087EA08E4151DE5FBB766497D1CE4877947
-:1077F000BF88F2FC6C70FB558603E76D96EA880B38
-:10780000ED8E694EB0AB059F87FC40E9A1A17EC318
-:1078100090C36CFFDF0DF9700EC2E6E770BEF53D58
-:10782000D80794CED0CFF65D46020DF47B92C2EA23
-:10783000642209C4DA8FEFE27820BE3D287F6C24F1
-:10784000F217A6F5789450F4BB097F1B0B7EAECDE2
-:1078500049826037C5DB48309E96B63CE9989E7FEA
-:107860001D84D507537206B9E6BCC4D81E4DD7C4D3
-:10787000259DEA958B22BE7F2AEAFD53677A5F83B6
-:1078800087D73224979D7F677089E36BF04D749D95
-:107890000E013CF21DAE06C0A3123E700FC023DFE6
-:1078A000C6FCC49446A2F7E38664327975BFC0F47F
-:1078B00025FD2BB6E9C6234E0BC64F1FE270EFED38
-:1078C000AFC555FAF4B74A00D73EFDADFDF58F8B35
-:1078D000DDDFDEDF7CE263CF27B19FF17DB1FBD737
-:1078E000BEFEF17B41151E32B9211193760E7A4806
-:1078F00026F85B0907D24A1855B07D8228BCC5011D
-:10790000FD517A883B4FF71CFE2F4F87BFC131F0E6
-:107910004F824877257C3EB46ECBA4F3BB994F775A
-:107920007233DBC7BC75218B23DD7C2F3B2F74F0BA
-:1079300067ECDCFEAD8DCCDFBE7511DB3723E5ECEB
-:107940001C9093FE07DFBB0D06A1F8BECD2F04826D
-:10795000B9700F4E94FDDA7BDFCE5D12F42F898A69
-:10796000C768F4A49D5B9AC7EDEB5C4E9F0B48D8AB
-:107970000E7C1F7D8EBE3583E5A55177CC0DEBBB0C
-:1079800085AF4FD303BE156438DC0B209AE25CB0A0
-:107990003F22F273ABC4A1B0BCE5EB930CF2E7E479
-:1079A000703501F41D79833FE7F711DD71859AAEDB
-:1079B0003FE7259D8EC7FB471A645706C845F9F473
-:1079C0005544A57CA19C1E4254DD39346ADF21B3A5
-:1079D000CB4E82711CC9594CCAC02E4CE4749672AD
-:1079E00065AF1DF63E85CB1D2B543C077B5326D33C
-:1079F0002F0F67152F00BA101D635D1E5B5FBCFA69
-:107A0000B6B1F535C0FA72FBCEBB4171B9D00EBD2F
-:107A1000925A1018EF7159603EA259FD5805FEFCAC
-:107A20008D4CC0FFEF0B0786CF93294901C87F9982
-:107A3000EF78F800D0EDF27A27EEA32DAB1F8EE59C
-:107A4000C3F51968872EAD7761A9C1C5E2F2BB45C0
-:107A50000A67CB796C3C8BD3C3EC0CAA8720FF421E
-:107A600072D605A16EC9AE2360FF5A7BE1E347F8E9
-:107A700028BD750FD6CD50A7A5DC380DE14BDF270B
-:107A8000651047CDF22C07F858D50B88AAA30B73C5
-:107A9000C62843BD0FDC34FAD8CCE0F7A8C0E823F1
-:107AA0001A7E8FCA1D2AEC3F3F7A45EFBD36083F4C
-:107AB0006AEE33F8FD9AEDCFF50B3F6712DAB3F3B8
-:107AC0008B96CE6EA08F1EE1FB900FD68F45783D32
-:107AD00004795DC3C03F70632902FC281D99F37CC3
-:107AE00044A4EF9B553667B3ADD86D2A64B40BF050
-:107AF000136D0C9EE68C3ADC8FB3D818BC449B0FF8
-:107B0000E122DB18BC441BA33785D72580DF687CC6
-:107B10001F9F53F8B5668E013C8C37C04B4999784E
-:107B20006EF05B45E147E791C2F92B1A0E29704EC2
-:107B3000212FC257FDD9754FD1F5831E7F86C2070D
-:107B4000CAD47EFCC7D42C2647534C757B6480472F
-:107B500012E1FAC547B28B084B5584BF0C1F51A1E7
-:107B60002EB0799066235E45A71475EF9BFA0CD072
-:107B7000C1CAB76513EC938A8BAE329C271567BADE
-:107B8000135584A74700FDFC48BD8AF85B01781CAB
-:107B900006FA91F9630F707C3E087C82F865FCF16F
-:107BA00028E797C7399F34B8D8F989E553595E5605
-:107BB0004A8189DF871624FABCA744570B51E8BCD9
-:107BC000D0C656B10CA29DF18939703E7D2F3E8FF3
-:107BD000B8814E123FB93B806B25C599601725725D
-:107BE000FB975CA226CEC283B44189F9215414A22A
-:107BF0005FD3618A750F56836BAF05E2A6FDCD6733
-:107C0000CF8C57912E4B2FC2F46092EC299EB580F9
-:107C1000D66D8DF1181F8C77798A1E003E6FB423C4
-:107C20009DDAE8FCCB74788FEF07AFCF665D61CA51
-:107C3000A2742882D146F1FB44E3102BC0F929B984
-:107C40003813E4EB535CCF521CA8FA7DA82E2E27E4
-:107C50001D851718FCD995B21BDF735E6294032B48
-:107C6000B9DC4D9A6CA4774DEE7ED42B773DA930CC
-:107C70009FB4D393911F53AE8D2D7F1B64C507F71F
-:107C80000A348C64FCEE2B51D0FE8B210F30AE7D7C
-:107C9000D233741DC8538DBE9610267F7C24CE85AA
-:107CA000FA88DFA3A3D9C7CBE0BE412E67A114CFCA
-:107CB00053906ED26E35617EDE727E5FD66394BE67
-:107CC000A0F453FA82F2D22CB69FB1C4320AEF6DFF
-:107CD0006BB099505E489F9A0336B057F78C734249
-:107CE0001C41925D1D6E8807DAA5967504FA155A37
-:107CF000E03E0921B1D00974F0AD7DFEA033E5E18D
-:107D000051740A4047CE946272280F770FF05CB32B
-:107D1000ECBC96405CF199943A2BC02D2F8BF95D09
-:107D20008D254508470ADF8959A99171D2675ED927
-:107D30007BDF160CFB4C3FE7A3A767713B3ADB47A1
-:107D4000CED3F17BA3C0ED30D54786EBF87EC9F9E1
-:107D50005308EC2BF5E5F77EE4D97A26CFEE1762CF
-:107D6000CB33CDFED4E4991C2527B472E9A0A986B3
-:107D7000F35D4A8A0B68174A9F89A248F25DF4E8CE
-:107D80002D890887790007927165AF5FFBE3C160B9
-:107D90005716C5A4B7683936BF57AFBBD3004F4796
-:107DA00065357D16D0D3DBFDE9757729D2A17F80BB
-:107DB0000A7A69CF1357615CE7F0137615E450D95E
-:107DC000E987503F949E1E876579E315A8CF8527E4
-:107DD000AF2E027AE86CBA3CFF5388F3F8EDA8B7EF
-:107DE0003B1B270DC5FD487FBC0AF91D9D8DB4BD09
-:107DF00030D20EF9E2A22E5F8040F45D77FE9B1434
-:107E0000AA68976AF79E51BFCE311EE242AB453C4D
-:107E1000D754FAA4DD0DF6677FF457DA143B1E0041
-:107E2000BA16E2AEF483C3C18EDEE3181F0ED27120
-:107E3000E7AF63FB080D8AFB4810ECA627ACB80F30
-:107E4000D99014FB5E900559972F0739B020CBFDD0
-:107E500014E2C9C6EE29ED9F1FD8F78FC02633EC78
-:107E6000633DCBEF47913C8E19867D36B68F758486
-:107E7000C75988A59FF638DEAEF6D3EE60F922C466
-:107E800019BB5DF333E2237E460BACA3A6F1F8D217
-:107E90004F115EDCCFE0F33E2AB3791F7DC11C5841
-:107EA0001283FE8FF2FC940A81C157E383A3BDF6CF
-:107EB0009107EFC389A65361DD8867C6D171BFDE24
-:107EC0002FA3DEA8A6F48574B56E1CE6C70B4F8CF5
-:107ED0007B1CF2864FBD23627BE5692BB677DDE71D
-:107EE0007A06F29EC2EFCA04E4D3A9FD9727B03800
-:107EF00091318E7DDB0026170E71F9507AFA11A4AC
-:107F0000DF5E3AF12F5080FF4A4F3FC6E87B838007
-:107F1000F756125FF5BB13CEE3F4391EDEAFB87A25
-:107F200009C0FB123FEE9394AD37BBC01E88C6F369
-:107F3000A12CD510F7280B2DC77109B5BF5274FBC2
-:107F4000E947799E71D969765F2171FA4806F00395
-:107F5000974F113A36DE43DB658D1DA73FC9ED9F74
-:107F6000D2D3171BFC8CC8FA2EC3E7A55CFF9785FC
-:107F7000C6613DB29E67C6C55A4F641D9760FFAE8D
-:107F8000C4D8DFCFE4703E525F4EDC54BE952BACBC
-:107F90005FA9FF2E05E44E69536292A05B575963B7
-:107FA0009521CFA3ACA94499AB1B378287A5EF4E8F
-:107FB000902278C87C6EF1D54B6C601714CB03808F
-:107FC0009FD65514FD5485F1987CFA52F6E780BC93
-:107FD000EE6CBCD311EBDC44E68028FC3472FC5020
-:107FE000BBBA50871F0D2FD1EF1F595B56F4538832
-:107FF00047AF62B790F42F7FA2F0961B1B6EA37A57
-:10800000E1361CF38DCE0EB70B0D79457DE0C6F140
-:10801000ABC1457B4EEDA80B078C81EF11767EA797
-:1080200091E1FF6CF08A7C97E37F42EC75CCEC5DCC
-:10803000C722E2A38C3AFFACEBB887F82C675887CD
-:10804000867FF28201FF339F5B8B7CA8E17BFEDEA3
-:108050005548BFF3293FC27E7FA7FF2E47ACFCA245
-:1080600099FDE1FD3C1FC92BFABF87F72F655F0E15
-:10807000E495F95658D11F39BAEE911C3D9C17640E
-:108080004DB80DF0429A53CF497FF826BAF6837F58
-:10809000E97B42C678DA962C4F19BC5FCEFDF0FB27
-:1080A00013A70C8D651F3C50BF7F04C4E91AEA3B3F
-:1080B000B094B97D49C0BECC457BC91DEB7EAF6590
-:1080C00003985C79A0BE83C53D2D3EE2D49F272650
-:1080D000CC7EFA4FC2E235DA7B8AEC7142FC54E185
-:1080E000E79D65C9B32CB710E21E29053E1DFC961D
-:1080F0000E60E7919667EC75C2B962331D1FE239D5
-:10810000966CE9A4719F93D50B844F45C86F965325
-:108110005A08C643F3E8731DBC95940E437C3A1A83
-:108120000E92C581FB4D1261F69CB67EFA04F5D223
-:10813000835C2FADE471CDA7EB5B30EEBF24DE8115
-:10814000FA6FE92013F3A72C12DE57634E64FD95F6
-:1081500004366F2BC4BD45D0AB41ACDBE1461F11EB
-:10816000AF4613A09E485401EAC924B814EF4999B8
-:1081700010FA093C7765780280C76F333B0E081010
-:10818000C72EF60C03FDDB28FA0A54DAFFE762B8C3
-:1081900000FAE5D0A64F92583908F2A13DBA7D2DDC
-:1081A000764FA8AA8F0B46D7072D92A2F67BFE32F8
-:1081B0004CDFBE22C3FD0ACCA3C1CAEE194AF95C4A
-:1081C000C0FD9C062BBB6FA8C17E6302E8F15F0F68
-:1081D00060763BD201D0D17E66CF9C94D4842416A5
-:1081E0002755DF30C4F92DEA1BBAEF48DCDF6BA658
-:1081F0007429E9F655CE93DC26A09BF3FDF4B97EF5
-:108200009E31E2714936BC9637E67E8E363FC8DB3A
-:1082100007388AA7A7A0BF164D0F3B7BE3CC3E11C2
-:10822000F0394BBBBF58BA9FD51389F687FED7A745
-:10823000BDF6E8FDACCEF739BD73D93E66434902C1
-:10824000E6C769F398D5FE6007D8A9B3DA33E7C16A
-:10825000FED62CDBD02FA0DC2987F7C6831D7897AC
-:1082600080E74A6EFEDD1B723C2DB77DB80ECF3322
-:108270007FC1E5E96C12C67BE13DC4C9F7D903F8BB
-:108280007C2E71F17A8B0C7EFDADC1C00D57D3DA17
-:108290006D6F04AE06B36DF6FEF09B20063C2DCE4E
-:1082A00029B887A0BDD7E67A8BD5D97BBDEB972CB3
-:1082B000B89EC87A2DB87E6D7D74A608FF5EF8F072
-:1082C000FB9A34788873E9BA29BDCC4AB8F14A726E
-:1082D00006BB7C966DF8176CD384CD271A3EA7A0F9
-:1082E00089DA8F5D03DC249BE2EF0F03DC0294D577
-:1082F00096708E3418F944867AADE81904A9CF5FD8
-:108300000DF40C4B053874249F93FC3C6065FC7F96
-:1083100000E819F2BC4EA7E0BAB47BE8F7DDDD69EE
-:1083200007BB73E9B68FF19EE51A31F4E84D180FDB
-:1083300015D16F3AD93AEC8CE7CF0E409C8AEABF50
-:1083400081D9DA394BB6CE3912E39339ADF1988F32
-:108350003F679168B8477ACE2296CF47A48EFCEB50
-:108360000DF6FAFDFD8E03F182E871E62D9A443E8A
-:108370001F0DFBB4CE09183F58C3E86BDE64B70885
-:10838000F9CEE39709B8DF3AEEB0DA16A2F57981B3
-:108390004417B0E7BCBBFF6308DC7350DBC1E2816C
-:1083A000E9E2ED05F7419C652FD3E350BF1DE8C41A
-:1083B000E6566DBAFD822EB9AE00EEFBF3DD6673B4
-:1083C00003FF975CEFFE14EFF3E5F10A4DAFBED665
-:1083D000588279B225B7AA6301FF252D5637961624
-:1083E00022C551395622110B94E90A91AC50C6119D
-:1083F0000B94454BD8BDDDA58D33D03E708C2D56EA
-:10840000E03EDE92F617BF81F7CBA4E01E763F0573
-:10841000834F49FBDBDF035E17B88B319FF1C20D41
-:108420008AC10F1CD962AC5FD466AC17048DF5D13C
-:10843000FB8DF5F5D904E968AEE5BA3C80D7DE5D81
-:1084400066AA8B20FFCF8CF92E8704861FDF462B70
-:10845000CAC34955ED45E0071F7FD96E023F7AE751
-:108460005F7F89FBE1E1CDF104F2ACF6FC3E8EC406
-:1084700041BEE22BD675D05E457107F1CBAA57AC51
-:108480006BC10F7FF502CD8F0FE4C37A5EFD1BCB6E
-:10849000AF096F3407607FFCF8F6175F86FDB4E321
-:1084A0001B07A07D7548F099E2E0FB5FB2F8678892
-:1084B000DF1717E2F7C5556D30FAC5776433391306
-:1084C0005A7271422CBB492B876724E74DA673EB88
-:1084D00079C83C07E240C31A8D70D1FA8D08189F05
-:1084E000DFC3C71F4F94089DE6429E40A0C101FA1A
-:1084F000F7F9D8F7242FE1FCF3D24BBDEF89FC9EAE
-:1085000038A2EACE4D45E437593800F23700FE83F1
-:1085100023CFAB886E3E3AFB642A1FFF6B0BCB6701
-:108520004EE1F7F71FABDF8F7ABFD7EEAB77BB27F4
-:10853000EBEAA58D7BD24AC07F6ADA93365707AF44
-:10854000EA8DFBD26EC1BC270922B8A47AD60B8F64
-:1085500041BCA27AA3D802F38476805B57CB9B0EF2
-:10856000E847EDE151100789D8A397BB27EBF8F84E
-:10857000EFA55B8DDFAAB9FDF2DAD88E2990A75E50
-:10858000D528B8A05B55CB0DD75D0DF06E62E75CCA
-:108590008B24522C52FEAADE72C35523216F66F53E
-:1085A0001817CC870E713D3CAFDA7402CF333C1CF8
-:1085B000F5BB075AB9239BD985B47FD044FB3F7CD8
-:1085C000A3AD1CE4171DF70DA8EF1DBE0EEF5771EC
-:1085D0001C65FB0FF4F927266AB71C9DE87BEF1694
-:1085E000FAEA71D2F2D1D510576A34D223A56F01BD
-:1085F000ECB2F07AC1B50E9F2E29BA164C6EF76216
-:10860000CCF7A5ED73629DB7AE0818C789C6FB47C6
-:108610007CBEF46FB89E7EA2FB254FF3613E79F5D8
-:10862000222A0F757182EAC37EBC5F32FA3B444F47
-:10863000D7CC9E202AC8C3CD2C6F86FE0996229ED9
-:10864000A73B84D5F15E45A0534A28551790C92A07
-:10865000C0FB5A3215CAF12057E03EFDB12DF9D0CA
-:108660007F87107AE1391CCF8E72BCCB19C47B2670
-:10867000B3F839D32E95D57B789C536BAF6CB7622A
-:108680009ECDF1AF1494B38B5BF6611E7DD7CB56B4
-:108690009389CA83E35B9227423E66570BBBA7F8D8
-:1086A000584BF244E50C7A3B5A6E68FAF420FC937E
-:1086B000EADD3F67BBBFCD063D753FCB574D4FAEA3
-:1086C0002B88F5FB17DA7B294A5D01F831E1DB6C79
-:1086D000AE7508275FAE8471F00C17E40995086C3D
-:1086E000DCB841C5E240DADF4EFB423C3A69BF8864
-:1086F000BFD7F0B9E8FA897308DE278F76D0FC423D
-:108700000FDE4F49EE677995F324129428BDCD030F
-:108710007D948F7594CBF39A04CC2B9BBFDCB81E51
-:10872000B82757AF472B4880DD6FA18F230E867C7B
-:1087300017AA6FE05E4B0BCBBFA86C36BE574582C5
-:10874000389FEA4D3F9863C1EB1BA2ADCB9D0DEB6B
-:1087500012AEB5E0BCEE7C2A81EDF728C40DFA34E8
-:10876000FC941DE57B15F1E0783773BDEEBDBBC40D
-:108770003D1FE4F0A279EEF9C970DE96E93F74F985
-:1087800090BFD9BD5B5593497020BB7783805EADA8
-:108790006A178223A16E213EC728F61CEE1F807542
-:1087A000EBCFD794133F7EAFBCC9F89C7CC8F05A7E
-:1087B000CDCF3192665DFB60B0CF183CAA37990DE2
-:1087C000719DF19B049F1DCFBB061AD2E8FC6A8FF6
-:1087D000525941204FF507B3617CC8E719837A9F4E
-:1087E0005829DE9EEA95EB8111B1F2FC0F70383EFC
-:1087F00075436926F0EBE360B76671408F45B9C5F4
-:10880000E3072468A1DF891BDD5BC7F6A225AC3E28
-:108810007DF50BD31B2FA17E9EECC17DA17962F16A
-:108820005B701EECC5419E6B013FF34CEE1C09F9D9
-:10883000D63D14E3A18B181C9E195537A22E861D18
-:10884000A8E1F969A12508FBB2BEEDCCFEB21786FE
-:1088500065BD7EAD1EC8E451C2DE109E9B086F133D
-:10886000F09CE52AE1209E475C75854AC0BFCFA0F9
-:10887000780279BC4A20F7C37D5C85AD336E7F13E7
-:10888000F05C18E7829FBBA8699D20D6D870FDCC0C
-:108890004E8BAF5B0BFB39E973868F023AA7EB9ED9
-:1088A000732D7D7EFB4015BF97696378CF58E2CB6F
-:1088B00085DF814AD85B7CFB9BC08723E3F09C6CFF
-:1088C0003A85953D09CB65607F6590C502F47BCA0A
-:1088D000C1C64F35897366407D14AB27DD2BB8D7F1
-:1088E00021F1ADC0F1D3CD642ACC139E831D6981E3
-:1088F000B802B607187E27D515C078E9435899A263
-:1089000004B3619C777AF1ED41BF6221D7630BB765
-:108910004C48073FEF9D2EEA7053B9F54E86660F1F
-:10892000056DF8FB50E70D67FDB95FB8B0809D3766
-:1089300048C931F6EB91DD09A3418E7EC0ECF853B6
-:108940003637C6A72F5662C7B39E1BC8EC16EF6911
-:108950008104747AC03BF35BB42BBDA725C3F3AE8F
-:108960007A8B21CFB9BA7C2F9EBBAF211D98875D32
-:10897000D3126FC8DBBD382EF67735FAF69E16890E
-:108980002FE67715E3F3D3C9C4971CAB5F9AF1398F
-:108990005D87A1DEF65DEF3AE039191B72803F3842
-:1089A0008DDBB53D01934FBE2882976E67C8A077D7
-:1089B000BA5556EFE1FB715ABB367EF74C859F2BBB
-:1089C00062F72A037C7CC30879B6FD04C6A3ABDB3F
-:1089D000F74C61BFEFC5E8420F279F4E7EA4357468
-:1089E000044D94B77F3BF0E86379232889EDD5F8EF
-:1089F000F8D8636ECAB769A2C9C0D7F185BD7C8EAD
-:108A0000E2E52993C8E5C2F1C7265FA2AFB3FE91A4
-:108A1000F7BBA64FA6B67D611E7BFF8F03BF7A6FA3
-:108A2000C97911B944D791536CD7D52D51751BAD68
-:108A30008FD4D59D51ED2951ED1951F56CD6BFCB91
-:108A40001ECC115D84740E3C315D1A07FBD8C1D970
-:108A500070A3C0F286AFA74FA6F59AC20ECC9FA90D
-:108A60006D175CB8ADAFE5C7BB989D657385F0F732
-:108A7000ECE20B3BDE023950DD2638054AEFB696B4
-:108A80002D9857530DEFA9BAF75A98DF59DD721098
-:108A9000DFEB77FCE126E4E787871FC27EDAFED1B1
-:108AA0004DA4F7F73A4E0F043CB674323D1CB57F27
-:108AB000D49DE9DE87F230EAFCAB17C6B545E85E27
-:108AC000EBFF8791EDBF8361E2179E582CD1FE7FAB
-:108AD000AAE91C03F612DC710972FF69213002F465
-:108AE000F3B3C43302F4D16D35E7EF31D17E07E43F
-:108AF000D06AB8AA61688EF51A89CAE903F6D0402F
-:108B000081CA92E16B92AF01781E480DE10D0D3FD5
-:108B10005B93C2DA078606C2BE6B5ECE8F59FDFC40
-:108B2000D06AA85FBFE602561F191A28D2F707FBC2
-:108B30002EBC06E0BFDE199B6F07E63079AECD6F25
-:108B400066813B2307ECCD6AA62FE0F8A585CAC550
-:108B5000D995C736AFA77098FDD3789457EBBBAEC5
-:108B6000BBB218D7EF2B863C3776C53BD767289723
-:108B700025B4033241872545F061CFE95051DE5FCE
-:108B800050B705F47EFAEC3C94F7A7B2DDF53963F3
-:108B900022E59F87B0B23E879DF748174D986F90AA
-:108BA0007E8F1DEDA0C7F97E12E51BC4AF8DE36378
-:108BB000540E937FA372989F9435F0F27A58CFCDDC
-:108BC000DC3E5DF95060A395C2FFF740242918DF11
-:108BD000467BF796B5546E24403E853B13E4C12D89
-:108BE00010FFCD8BD435FB7D6501ADDB227EDACA6B
-:108BF00019EE4C7D1ED0CAB5AC5D93372B73D9FBF3
-:108C00009ADE496F60F0497F7CC43A5847BC44F013
-:108C1000FCC5829943D72D46FD7D2DAE9BB8DD99CD
-:108C2000E07F1FAE186C02BB52C3CFA202F7345CC8
-:108C30008FC8F2D5353C69DFAFE7EB9E2752FD4F79
-:108C4000D7593FC883EBA7F6403E4B2E60F6403D18
-:108C500004625323F02552680C3CFF5F04A7DBA19C
-:108C6000FD1F85530C79F133E857B388CA0B934E37
-:108C70005E70F83D2D04E5F442DDFD25F439F88100
-:108C8000370DF43C90A3DBC7997D4F0DDA7FDABC3A
-:108C9000E2FFFDB5A93791BE7C166D9F1DF8BD653D
-:108CA00039C6019516948B07AE24AEC5203FF8BE99
-:108CB000AC665F16FDB4EA1DF0A34EE688F89E553B
-:108CC000C3AB50BCA594C2E921AA56E13CBA6F06D9
-:108CD000CBEFD1F4E64A7EEFEECABB2FC43CBF1EF9
-:108CE00012C2DF65F38D2528FF7ADB670DC5768A12
-:108CF0006F9F15F8BD220E7F77606501C173362B1B
-:108D0000675D80ED3BB5B8D22C0B7E67E50C464F16
-:108D10002B2B581E26E811805B7FF490D6C0E21BF7
-:108D20004472E7EBF301DEE5F88B2F0C6DFB18ECDA
-:108D3000CAE556B42B4177E2FE883F1DBF47F1BA22
-:108D40000DE599E6473D99C9EE9B252EF4CF1FB45A
-:108D5000BB4B505EDD17AFC2FC9BAC64996514B889
-:108D600023E47E947B7C3EC4FF0CE679CCE1F6DA0A
-:108D700067E527ED600FBCC1E50D100CF8CB73095A
-:108D80006B9F7B6FFC41F06FE6DECBEE9B25CB2E1D
-:108D9000771BF73BE85CD3203ECEFF1AC376808377
-:108DA00007DE73C0F8FF6987FB4C3CF7B2F3BDC424
-:108DB00047DFD7E5437F0CFC0B717691CD9FD4C77D
-:108DC000ABB1EE05FD98CB773A7FB7FE7BDA77A2A1
-:108DD000C7A5FEDD2740A714EE41380716BE4FE4B5
-:108DE000BFD76A9C6F8A127ED44ADB67D78B894BC8
-:108DF000283C3D8BECB85E6DBE73D2C397B2DF8565
-:108E0000358E7F24BEB608E2E19A3F42EE35FA6322
-:108E10001097E8AD8B98278D7E4D9FE7DC9F8DF6F0
-:108E20000309F99B59DFAFF79C862A44CD9FD39560
-:108E30002A4880370FCF5F5094F06CBC572A6ADE07
-:108E40001A3C9541260E774617D1F05606717A885E
-:108E500082778A121A08E37A1699114ED1E36BFAD7
-:108E6000F1192BF1811FD9280848AF8D77C7A3BE10
-:108E7000231686676F659C0AF4FBAC12C63C27DF9D
-:108E80000EF6FBA03DD6F0AB28B7CE63F1869EF779
-:108E9000C4B5D0AF3B95D17DF77699F31B61F74C04
-:108EA000BC27AEC376818DDBBD381EF3A7E07CA85E
-:108EB00002E7367D7FAE87F88BE6E77FFE2ABB6F41
-:108EC000017ED747EF27C3B9DAF25111F981F7C70D
-:108ED00000BFB7C5F33892A702BF774B1C813C8D0A
-:108EE0005A938079BFB59517E03913C2EF79AEE692
-:108EF00053AB35517F7154440ED49A0E0D057FABA0
-:108F0000DAB21CEF7FA6ED6F809F063FC3DBFB3B11
-:108F10001FB97DF150BBFCF85FF1DC7BAB913EAA41
-:108F2000237484E7E72AF574951BA117B4C7418E13
-:108F30004C26786EDFCEEBF1533B0210C7F1F2B84E
-:108F400046EA5E76AFADBDB085405CD57B94D92353
-:108F5000E3DBD7EE03FF38716A077864B43F8BCB4D
-:108F6000459F2F1AD7BE4204BF4FB363747EE78874
-:108F70006B47EA4B761E17FC58F85E081E01FF4847
-:108F80004CFF3DCDF51FD59328AF17F887A19E0460
-:108F90003D06724EF38341EE819C7971D0C45B072C
-:108FA000A5C27D86136F1AC4F66946A0DDEF3BB7F4
-:108FB000FD28AD1FF8C3678E9731B8855725303926
-:108FC000023F100A71E4DFC86B1FC6F949ECBEC648
-:108FD000D5B92897B5384E358F6395F2B84F298F9C
-:108FE000FB40DC559F170B714D7DBD9ACB851AF860
-:108FF000BD29BC4FC01CC98B8578CF6412B4433BDC
-:10900000C47D1CECFC9DFE7D2F094C9290CE7F30E0
-:109010001BEECD5AC9D63B87E37D9595C57BC6DF50
-:10902000BB5664412CB6DE8451EEDC070A23F77789
-:109030007DC1F1A4C1256ED0C412807B9CC8EE3FD7
-:109040000F3FC07E0FFB30D5DF5B783CE45A1B9EA0
-:109050003F769F07790B9233E7DA18BFEBFAF00EF1
-:109060002BDEE3EFE7F2487B3E6510CBF7C5381106
-:10907000C07D713CDAE114CCF940474583357D4A27
-:10908000F2213E7590E77FD6DE68F3C078211E3767
-:109090005F3D88E98DD583D8EF3F68F55EBF8FD3FC
-:1090A0008BB6CF05F11A7D7CBBB9B73F8BAF68FAA1
-:1090B000F7E98AB8B5ECBE778D6E4D78BE323EAF1B
-:1090C000588138D30E2E474AB83FBF033670419EB1
-:1090D000B4F0B8B4E49C0DBF1BB4E3681EE653A61D
-:1090E000284CBEECB8398E407EDFFE632F3DF21E69
-:1090F0006D3F7954C1FBF2E6F378EC0EB8171EE42D
-:10910000E53633C619AB15664F56EF1EC9EC18C5C8
-:10911000B30AF2BE7D5B658C7B553B021B5FC0F6DC
-:109120004C17C52C9C176576F0F678F67E5CE01738
-:109130002F835FBA3BDDE5A3FD176578F6021F6557
-:1091400099D504A2EDBB0A91F3A48702CC6E3E042C
-:109150008207BED36EE7BF33E0CE5C40C7F9FCA107
-:10916000745C0F95B7685F7DFE9819F7D59EEEFD8C
-:109170002E8B8F1E928BF13E9943DB0A5CD4F32435
-:109180003DC54A10E2DFDEC799BD37CFA4AE01F876
-:1091900090DDF12E83BFFA5819BB5FA2F2DEE967BA
-:1091A000DAE706F9AE8FFF7693700EFAABE5835BD4
-:1091B00020DFB4BB7D848B6D6765E0264A2DDF7FA1
-:1091C0003E2C33F88677C948CFE73A3ED045EFEFDB
-:1091D000E089047FDF4DBFDF16BD4FD1B7CEF0E889
-:1091E000DD91CEED3A63FB75D99E53C06FB54F7CD0
-:1091F0007760910ADF0BA33C247E166F3F2CBB6780
-:1092000003DD264E0E1AF2B86C2AF70FCCDCFE23D3
-:109210004145CF875A7BD14412735FE7FF002E3F51
-:10922000E0290080000000001F8B08000000000003
-:10923000000BC57D0B7854D5B5F03E73CEBC92992A
-:1092400064663209931739790792C01043448B3A08
-:10925000090103469D002A5A8BC31B943C046D638D
-:109260004B9B814408881A2E01010127084AAFD878
-:10927000062F20D64807448AADDE3F3EDA8B7A2F90
-:109280005F508A6805225A7EDAABF55F6BED7D92FE
-:10929000394322D8DBDB3F7CB0D967BFD65E6BEDAC
-:1092A000B5D65E7BED9D5855622C91317B37F385A9
-:1092B0008A18FB067F6EE84F635503953336C5CC9D
-:1092C0009218BB96F19F8CD350DFC6984D55191B51
-:1092D0000DDF4F874DB3209FB1246C9A2BD200A491
-:1092E000278D2C6C298574A33DB42D135BFA18F6D9
-:1092F00033770CFC179ACE95598BA504BFABFB7B3B
-:10930000DC8C9DDAEBF4AE82EFECAB6F6456C6D822
-:109310000C26EA9959ABC5C5D88B2D52D802F566F3
-:109320006C306FB3427F65CB7CB21DF2BD5B24EF26
-:1093300036A837A3A53C6F23E4EFDD53EC95A16974
-:109340001C8E83F990332443FD6B1BC7B18FAE6233
-:109350006C96396452E03B7B4E623B18F5DF82FD30
-:109360002F8446C92597E261DE063363163EF76F08
-:10937000F09F50443E0BFAEDEC9019CC97ED84EF42
-:1093800005FDDF172AE183521C63B59D51EDD9DF3E
-:10939000CC7DF5105016243CBB4DEC1EBF8D263DF8
-:1093A000A4A698B13FE27F93198BC9F05FAD121D5F
-:1093B00072864CB6C3BC2BF8BC7A774B84D75AD68E
-:1093C0006062D84F7B0263D7448C6B61E158484F91
-:1093D000C9412A9F6B5E4369B59A4974BB97F5985A
-:1093E0005836F6DB6BF2170FCE07D597E1839B0556
-:1093F0001F2C3CCDC2D7C1780B97B070ED089EDA18
-:10940000219DABB0601CE0752EE0205EA431251CD0
-:10941000AF6A413F5E1684F479C4A71A8167C463BA
-:109420006479FDFE6FCC91F92126C6ACAE7E3A037D
-:10943000A108AE21E31A4635009CD72E09C90CE6D7
-:109440009792EEBB3107BEC796F2F9D61FB358D438
-:109450009198F7B32CA8F7655AF90BB930DF7A85E4
-:10946000F93AA13C16F0D201DFB7585910FB7F2A18
-:1094700097CFD763E2FC6B54FC6C940DE9D21D3698
-:10948000205D129903F951C3E7163BB42BC1761244
-:10949000B5EB6B6F612D3111ED2B7E65650CD6CB75
-:1094A0008597EC213354654A20C309FD257D60660C
-:1094B000AB207FF657F6F9D8DF59239BD609F5DDA7
-:1094C000326BE8247E594EF4F919D23511B9A9222C
-:1094D0009521EF4B93529907CB97D178B54EE0AFDA
-:1094E00001E8DB579ED97D3BE72BB3BA0DC6BBE045
-:1094F000ECF921E6011E1684FC0F91CE88973DE31E
-:1095000046FD04BED7FB6D5E8EFDC028E457B3FC5C
-:10951000C0ED16E0AF09F292DE87601EB5E936872E
-:10952000199A5466FCE71FEE84FC277B8CCC8C7464
-:10953000DE316E1ACBBA140E2D5D10327ED813B107
-:109540005EEEDBA9CFD776EAF3F54CF9B047E3033B
-:1095500040C116D5EE3E5548B2C3FB0DF0B7D9DC7D
-:1095600070BA03E035BF6CF62E85CF8BD4C0365C65
-:109570004F7586DE23886773C667230280978A8CBF
-:10958000AF8EA422FE7FCABC08F7056BF90CA2C7F8
-:1095900046AB1A8C905FF582FFDB87565379FB262A
-:1095A000B32AF1F2EAD120B7E6D312A62A1603E0D5
-:1095B000BF7EC3C44FA411546E417AB4039F52BB03
-:1095C00017A4D05268377FC3BC6A06E56758C864E1
-:1095D00001783ED1F02C774DB0C07FDB5D55C35094
-:1095E000BE285F2B7EA4FF0AECEA9A7E7CFDBA6F50
-:1095F0007D5ADA4E025E6E62128BC7793B03BFC69C
-:1096000079D65A7A4CE5D0CF0D5F7F4972795EE307
-:10961000ABD927AF4279E39B41F486F9A11C99F7B6
-:10962000D041FA2E4DB6107CA7D26D21337C7F75C8
-:10963000A399E79D26CA9FDA22517E5EA714B264E1
-:1096400062FD8B09E528BFB7181D6676299EA2F139
-:10965000F2F1E6FF886300F2C78C55E1FA628E866C
-:1096600038BF1DCB1AE2261723BE6EFC04E5D7BC1B
-:109670002DB2378C72FA15BB3797617EFCB0393644
-:109680006CFF454239E26FEB78874CDF653FCA21BA
-:10969000A6F8BA6F80EFCAD6AB555C2F87B770B803
-:1096A000E7392DCF209D6FF85A26FE570C2CB0DBE2
-:1096B0008674F00DC375A76EDE3101F1FB714D8A22
-:1096C00081EA3F2F3107E2C3D99884DFE7498A1F37
-:1096D000D7D9FC0D0BAA595C3FDE57A932AD9BF2DE
-:1096E0008C25493D36E2FBDB51DFD56E013EC7F1EB
-:1096F00027BFFF873BDDFD7C2F4DDE70CBB5D8FF4C
-:10970000B346E22FAD9FFACD370BFE602C0C789A52
-:1097100027F064CE589287E35F6E3DCC5BD690E72E
-:10972000B05D7E5DF4ADF7CD7C7D489912C955964C
-:10973000E6223D33D87AD4F493ADC040F2DEE26540
-:10974000BE1D900E31339F04F22B2F53213CE46554
-:109750009AA89EF297453BDF04F8F7A981F84CF8E8
-:109760009EC17CA350CFA8BD8E8A78E8CD860C52CE
-:109770008A7098433B48CE411EF0B43E913DB32AD7
-:1097800002CE2CEC6F34AD574F26F47BF6BDAF8E76
-:10979000201EEB867E3602F576FDC52F4D2AD0D3EE
-:1097A000D625919CB579FD0CF9A3BEAB86CD2EEAEA
-:1097B000978FF55E2EBFA3E7559B69E4EBCCDD4B9D
-:1097C000FDDC9CC5D75DBB93AFCF4D8D3121947B24
-:1097D0009BDC212B021D5B1A6428DF6F2995BD08D5
-:1097E000B666A7F82D9C5E16DFAB4C467EF5CA5ECA
-:1097F00014F1DDBE8F5A1220FF66E978AF0C799B19
-:10980000EFE9D62C9CB7D728CAB38338EF37C69672
-:1098100093BD728B4FA671D9FCB810AA8A6EDF3B3C
-:10982000EED930EEADCCB7F624D0B10A9437D2B130
-:109830001BC7067A9D7104C6225EB4F9DCEC9DB8A4
-:10984000F664A49DE1E3F6007CE27AAC74603C949B
-:10985000A8E51548A71BAEE774F8F4797368198C6E
-:10986000FFA915F44C84BEF8D4CEF5CED44CAEC7C7
-:1098700018EB1C8A72BF2FAF0C33E0BA7FC0C1F166
-:10988000E136750EC5F5F62749DFCFBDAD320B8148
-:109890009C59D02AB11080F8E9CF5F1C8AF2F79367
-:1098A0001D2F0E9D19015F743B2D9DAE8DD7F68443
-:1098B000CF02E3CD64DA78E1341C6FA6D77C02E5F1
-:1098C000076B1DEFEB89B01F484246D4671B7C2411
-:1098D000BFCFC16A44BED3DA9D9B1FE3433BF31C59
-:1098E000B38424186A66971C36637F3E5F8E1BE83C
-:1098F0005DA7B58FEA7F03F20FC025ED97C276A86A
-:109900001F5BD44BF27681C57F24158A16201DA1DA
-:10991000FE44A4A384FCEA33E1BC1589CBF3330EE7
-:10992000FF834887396D7A3A66663AB87C77B8899A
-:10993000EEA63A9B82FA22A999713BF0414308F5C1
-:10994000B53B266E04033BC694E2B1A19CBA212F1D
-:10995000A6C5108FDF8786B07E7A4A01B50B567098
-:10996000FE0E26B150B3845D364864073A7A9802F9
-:10997000DFD3C630C72A944599DC4EF430EF069900
-:10998000ECC44E09ED440D0F9A7C47BE41B9F7A9CE
-:109990006421BE91BA24B2FB6443E774EC77303E95
-:1099A000DA12C5475BFEC97CF4ECA07C1450898FA9
-:1099B0003C9681F908F64DDFA93E0BFA15C0D71089
-:1099C00081AFC7857CE97DD04274831F09E75B2D99
-:1099D000FAABB6D8C2F20892139FF5C96FE86733A5
-:1099E000D89FB84F4946FB19D2D4E6192AB7DFBB36
-:1099F0007B24E82FF66A0BE9BD470CDD9968E70F79
-:109A000019DEB01BF963C8F4A29266B24FD29C284B
-:109A1000F751D6E0FCEB1AC7F9B91D00FD221FD59E
-:109A200098683F51F750B99FDB0155B43EEA575B48
-:109A300055D467E3BA3297227FD42F01FB08E5EFB4
-:109A4000FE8E8D73215F37D5E6453BC56A995284FA
-:109A5000ED58AB7E9DAD943AC92E0E4E645E94DBFC
-:109A6000E74286A07124CAD99EAD3F413DBEA0C841
-:109A70001B5471BD09BECC61A417DA9DBE6417E00A
-:109A800075DFDF64DA17B58F823CA42F0B7AB6D767
-:109A9000F8929D909FB9DA4A786FEFE0E5E7EC80A5
-:109AA00020E83F45E6FDB1780BD73397CA030BE2B8
-:109AB0003D690CD37E36603E45CBB73D41768CB6D2
-:109AC000DEDB33393CF6227F265ABE017574770CF3
-:109AD000F04F926CD0364541B4BB63714C9EF7E1B8
-:109AE00070EB0C00480A66BF5E53393632CFEBF795
-:109AF000B77F6472651AE9D7BE72041BF4AE96F79D
-:109B000059018E15F6FE7205EC49CB7E49B4BF763D
-:109B1000F2F81C98BF24C60F9AD6F800DEC7AD4CE9
-:109B2000375E247C4A54FF4615F7F5A27E70A47F69
-:109B30003C545857A2B56F6EF301FC8F1BF5FD1115
-:109B40004A457BCC68E3FD2EE7776B568FEDD7FF58
-:109B5000600F38B346F7DB012BDEAF6E1B0963C520
-:109B60003ABE30A17ED5F479BD5B223B237ABDA6F7
-:109B700066717F05D8B5A95911F66E35DABB32D9B1
-:109B8000B9137069D52FF133B42FC16EC8C0F1CEAF
-:109B9000BEF7D9A983F0BD7DF2A764E7D75F54C8AB
-:109BA000FEA807FB03ED764B17B767D97E23E95D67
-:109BB0008DEEF70AF9D3EE04BD8F7CFA8A341AF9D8
-:109BC00094B186A1B7010D9AB37CC3100E6D3F16F8
-:109BD0000D6F4516B7CBEB0B2A36E661FFDB25860A
-:109BE0007A7F55C18749689FD4779D489A13D16E73
-:109BF000C1FE758487053B8D03CEBF228BDB9B7531
-:109C00002FEDF5E17AFF3424D15A9EAF8456A25D40
-:109C1000397FBE012D35561A9A7127AE7B36CDC4D9
-:109C200072617E05C2AEA9DF3925782DEEDBE0AF8B
-:109C3000049F36F9E7D2FADE34CD62639908E7CCA7
-:109C4000FB090F8E181FE261554145328E53573381
-:109C5000C181FE937AB0B3B0BCEEA1BBC89FD267FE
-:109C600007EF3756A1FD5506F6D6BF01DCE9AE4930
-:109C7000555E588FA9F2EE518B21BF7E10F9FB5E25
-:109C800036A7678BE40FDE8AEBFE2589ED50FBCB10
-:109C900033F673BBEEAE2C6E076ADFEFCA52A8DD57
-:109CA000D860F738E4BD034A4F2CDABFF5CCF7395A
-:109CB000EE3B99DFA6EE203A71B9E36E52C9AF646C
-:109CC00071F73C3212CBC72AB49F604ACF5A1CF7B7
-:109CD000EC4AB7771513FC8BF9878A4228478F66C1
-:109CE00005E621FF94093BF2EC4B378E9A59D46F6D
-:109CF00027ADECB08696011E56DAD57FA942F9F65B
-:109D00001785E41BB3F4768F437AFCD545FDAEB4DA
-:109D1000865622FD836B8C54BE3B25B008F9E67451
-:109D20004D551EEE83992D985703FC6474B731B4DA
-:109D30001760FB407E068BDBCF54C88F0BCE5024C0
-:109D400094F351F6C738F4F3D0BE010687EF1542FD
-:109D50006CE502179CB2D01268F926A1DF1E39FA11
-:109D6000D554053F6A768AC11258804D2BA7C5305D
-:109D700019F97E79EF1103CC27D6DD4D766C6DA7EE
-:109D800044E3D416BC6042BFC97D9D7C5DD68B7D0B
-:109D900000E06F28DA038F64C58AFD670BF55BCF9F
-:109DA000BA691FCD76717A3206F5EC91FB89A5541C
-:109DB0004FEBCFB48CFBBD6A853F067AA4F2F56207
-:109DC000BD6BFE095898C23EE0E3AE97BA7D32E221
-:109DD0007594E48DE41B2D7D3E8BEBF7F843BD13AA
-:109DE00070FDF6027FA15F66A35473FF6B30BF8DD9
-:109DF000A3877BD184F2003BC925F81D5811F05E82
-:109E0000BAFFF309C8376070D37AADDB5F2ED7DABB
-:109E1000486FD3FE71486C4307960FB9A780F46A68
-:109E2000CC55EC9EC9F0FD05B1CE926DDCCFE55965
-:109E300016CC5C5484E3FBEF7F0DC72F8E213FE5EA
-:109E400010A08DDD45692BFA853C6CA984F5D6C53B
-:109E5000F1FE130DF23D3545247729EFF24ABE6D30
-:109E600090766539A97FD87755219CF89DF663C017
-:109E700019B89F453F17F633249BA76793C30A0A77
-:109E8000884DAC67EB0EE4CFFD6607E2A97AFF6F61
-:109E90008EA1BEACB6B04E19ED95283B6349FA943D
-:109EA000D7903FCF9D39B5F561F8B6EEB67DDE00AF
-:109EB000D1456F3F44EF17B66195E4C1EDBD0FFA90
-:109EC000E8C9EDBDBEFC3FDCDEE3767D7047ACBA91
-:109ED00023429ED78B7DDAB9F9E7E350CF7CDC07CC
-:109EE0000FE8E9B27E7B65E6F6D813B8AEFAECFE71
-:109EF00028BBE1E833B141A4FFF94E2BF9E914B4D2
-:109F00007B009E33F6DE1F2272DC26BF4FC2FDC3EC
-:109F10006EA37719F4577FEFA7BF30C0BA533AC08A
-:109F2000EE89477B5F8D2739FBBACC76A05DA6F81A
-:109F30001CE8F7D0E0579C133CA8B75BC4FC179A09
-:109F4000C279640799D87CCAC785F3D0EE7959E8FD
-:109F50009D85319087EF8D9EC0D748B714339757B2
-:109F6000D80EBF77087BAB0350E240BC1C837D77E3
-:109F7000A6D0DFB8FF79343DB48AFC3816A2E74793
-:109F800007CCDBD0CFF35181216CE27E09F263A9CB
-:109F9000AD0A4B86FAEA316B48E5FE2E8B01F4FFE1
-:109FA000ACC7EF7B03F715B30E703FD6AC7B97DCE5
-:109FB00082FB8F8F264F30A1BC99C302E4779EC7E6
-:109FC000B81F7A010B717F35731870BCFB406C6C45
-:109FD00042511304EC5F0D9F2583847685DA027964
-:109FE000329A7D6D5530EECC1603ED4B66B5EAFD29
-:109FF000E91756DD5F857A7C458B81DB8FAD12E9F1
-:10A00000F159CCE741BB43C36B617602C983608BD6
-:10A01000C187E38CCBE67A054814A2F989B4C52838
-:10A02000FCF0028EA5CC10C6D420F1748543A91A89
-:10A03000483F6BFDB5181B2CE80FEB4D37901FF810
-:10A0400082C9378DFCA8AE3C867EC4167B436B1557
-:10A050002FA73573C1DAEBA7F2EB146EF031D5857B
-:10A06000F23233DB40FD45CF774E9B3E1F7D3EB144
-:10A0700020A4CFCF6281FCE46CF41BE9BF67667358
-:10A080003D706155A63807F0D239408B517D3B13A6
-:10A09000E5D54A85E4E5D2348E2F433A4FB39C95FB
-:10A0A000D3887F9D605F10BC1CFEACEBDC12EACD58
-:10A0B0001627E7CBFF29DCD1F0DE949DC7F18B4654
-:10A0C0001E8CD7B2520A717C71B8AFD47FB1305BAD
-:10A0D000BFEFECCBFFE3F79D9C1F57CA62BD394829
-:10A0E0000ECD74F0397D24799F09E3771BD80700E2
-:10A0F000F7AC957209DA29E3A6D8681E7507ACE4B7
-:10A100006FAD5DD23314D7515D454F5EC3007845C6
-:10A1100068154D7E41BD996ED827E0BA6DD59F5325
-:10A1200081A66591E74E53D27C4BB313713FF2D1B8
-:10A13000EEDF20BD775B493FC1FF0E9A517EBD9493
-:10A140004976535E5A606536EAF598F0D66733D1A2
-:10A150004EE176526D97B903EDC0992D11E75EF887
-:10A16000CF6AFD39186B75917F83B5EBBFCFDF1CCC
-:10A17000D5EE927331AEEFD79B02C3D0BEBBE17A6E
-:10A180005F32CAD5330B0C0CE93B4BF6CE45397226
-:10A19000C6AAB7BFCFD839BD76666BF2DD9B877490
-:10A1A000EECB5F42676F1ED27996810522FBA945EF
-:10A1B0003A037D170A3A9FD97B751ED2F9B3DD5752
-:10A1C000E7219DD71BDB7CB86E9ECD08EC423C9E00
-:10A1D0001CEF27FB09E455DE77E1C70351FC78E06B
-:10A1E0007F8F1FA9DD60FAF0B77D70E8F5A1DBA4D1
-:10A1F000A6A13C9C69317FAB5EC49F01FD6B163309
-:10A20000F9250E7CF5C563CFA01DD225931DA2F5BF
-:10A2100077400964A35FE1C0318F37280DDEFF83EB
-:10A22000C26EF5585810FD1F9ADDAFD98FD1F2F8E4
-:10A23000B898CFD96C5F0DED1785BF76BEE8D31205
-:10A24000FA82DBA9DB25F2C75AD44E1FDABD75AFFF
-:10A25000CC70A0BFF67488FB67EBF68E22FFED8210
-:10A26000D0ABE154B40BBB2407EE1F166C3F118733
-:10A27000E7DDB01F3D934D78E3FBD1F1623F7A3AC1
-:10A28000F4511C9E8BC3F837E33E22D6DD6B42FEB1
-:10A29000AD837D1A5461754AEF11ECAFCECDBC4150
-:10A2A0001415FBF5FB36EDFC7293DF44F26E539709
-:10A2B00014C27D5A9229909986FA89A5394EC5F61D
-:10A2C000AF97FFCEF6A5E0B966FFB9B1EF6B84CBCF
-:10A2D0008DE74DD0BE67633CF1618F91F9C80ED810
-:10A2E000681772492139F5E7CD4EDAF7D00FD4FF60
-:10A2F000732893F29ABE9EABB0B002789F3BD5F71D
-:10A300001ED20DE577384A7E47E6FBCEA35937D7F4
-:10A310002F20CFC3039D8F8B736A3CDF8D6C5FC78B
-:10A320007AA91D9EF3EAFAD5F601AC61940A70DFB2
-:10A3300077B7CD8BF64B3DF07563493F1F2E145315
-:10A34000D1F8B04EF879EBE77F48FB81FAFD920334
-:10A35000FDBB0BBD9C0F17C23EC93CE2D275CB3A88
-:10A36000810F23E01E6C1D5F9DA35FC77DF97F9267
-:10A370003FB322476FCF6AF3D7FCE27DF3EC92F84C
-:10A38000FA8A9A57F4FE32DA9FADED0FAF54AEDD84
-:10A39000D9070FC7475FFE9F2CD7E644E165B0F3AE
-:10A3A00082EF2CD7A2CF0D72B81F1CCF0DF05CF737
-:10A3B0007F7A6EF089DA9664203DE8D39DA7A29D4E
-:10A3C0008EE3B46E91C93E9820F373E85ABB99FCB2
-:10A3D000B4D1E7ADF5EA0471BED8FD876B507FEECE
-:10A3E0003132D4EBF36DF3E83CB35EDE6572A80363
-:10A3F0009C332A07C97EFFAEE7EF8FE6F49DBF6767
-:10A40000E2F97B59855E3EBF6AFB22211041E78A53
-:10A410002230FC07E0678B1264AE88EF4FE6707B5A
-:10A42000F8551127E331B1568CBF78DC1EEBC37DA4
-:10A4300087C7C0E3789AB3FC5B500E5A548EC7A707
-:10A440005EBA8319607E4F193B495E046B6D5E9462
-:10A450007B9A9F45EBDF2EFC0557CADF7BA3D6FB1B
-:10A46000DE7FF27AFFB536DE773D07DB00B8D1AD8F
-:10A470000346E75D6FE0F94DE6A5FC3A583F83F1EE
-:10A48000EDDB39FE377368BDF946D0B9FE15CA95C4
-:10A49000D8D2DE8FD09FC3F69855DC57A05F83F4E7
-:10A4A000E1EA64AEA7146F19E219ECB9328C833A71
-:10A4B0008EFFBD6670FBEF74DFBAE7F6DFE941E5BA
-:10A4C000CFDF67FF3565F83FC5799E2CF7E5A17EA4
-:10A4D0005C6107F8715FF7731E3FB3D9CAF973B3B4
-:10A4E000C4F992352668FE119A57F0797EFE1DCD8B
-:10A4F000572C57CF577DF97FB2DCB4F5C1F1BF2C93
-:10A5000037E7FF350EFD9C83F71324BA9555741376
-:10A51000DE7A5F91D8B608FF737D378F434B17F013
-:10A520006ADFFF2AECBFB9B9BEA118CFF5D97B16F7
-:10A530000B8B075307790CED2EBF8DFCFF759D3CEF
-:10A540004EA46E09A3F3DE3AF46F16A1DFAF86A125
-:10A550007DB74F0D1460FB15EFDB82723CFAC52707
-:10A5600033B2EBDEE3F9456AA088E2C596F4E8CEA3
-:10A5700019CABEF96239FA2D005EF203B8D12F1361
-:10A5800041A769B9FC7C404B6F8B821FFDF4C4FF6F
-:10A590009D7208EDC158B59BFCFE757BB89156269F
-:10A5A000FBC83FCFEE7331E4A3BA3DE5A35EA3FA47
-:10A5B000D65168CF967D50ED403FC467D7B929BECC
-:10A5C00060A8DCB300EDA9A359817108AFBD343494
-:10A5D00011EDD10CB047D1BEFD6CF7C45108B726C0
-:10A5E000FFD6A37F1BFA5D6FD7FBAF99C597F930F4
-:10A5F000FAB7B70DA1FDE1EE94C0CDB9B84FB37273
-:10A6000078836BAC7CBD0ABF76F4FAD7D6FD10D93F
-:10A6100040E30CF9BE85CEA135B9B0DEC80296EC98
-:10A620007E7972958897037CF078BDAE1A1EE7217B
-:10A63000F236B73E6EF16CF6F8AB707E57E5F2B8C5
-:10A640009439965E09FDEC73C4F9FB8D228E428B22
-:10A65000A33AE3F0CFC6FA6C4955FFB97B16B6773B
-:10A6600070FE17F131B117B99D9CE53011DFD85B51
-:10A67000193F3702BE41FA8CEDED1E170FF3C96981
-:10A680000F8F457C1EB868207C28356FD079493CF7
-:10A69000920DFAC95EDDB3321FFD258E77AF43BA46
-:10A6A000A86D8E0A44DD3ED5FF00C1A13414E0FE42
-:10A6B000B1E2F7461E0FF84A2CE9F9F6A10B291E64
-:10A6C000F0ECFBC0AF9997EA032D0DB26514FF972C
-:10A6D000B5FF1DF2DBDBF74803C6753E9E6BE3E773
-:10A6E00049C16E8A336363DD840FE5950F82685F2D
-:10A6F000282B15F254B4187D062BD27529233F7BE5
-:10A700006EBBC38074C9107125E70EFCF78800ED9D
-:10A7100047343F7D8852C5D8B31CF757CAD29EEB49
-:10A720006105B3DA3D4E431DFA358DBD75E41779E9
-:10A730002596FC9F19FBB3977D0FF219AD0E26A14C
-:10A74000FCF9D57D19C8D7419867EE00F36CCCE5CC
-:10A75000713BCA2BB106D45BCA1A4671888A33A9E9
-:10A7600082E05E0779E86791E01BEDFC11C0F5A07F
-:10A770003E9A9B1BD88E788E15728035C690BFD0BE
-:10A78000AE70BF86BDF1FDE797427EABF0B71E3AD3
-:10A79000503899FC732B1509E970C13923C301DFC7
-:10A7A0007F99CBED11BBD2CD1CB648FC1FA2B8CB14
-:10A7B000AC57785C9A62E47CA2AC7477A0FFEFCBD4
-:10A7C000B400C5975ED71296E9FCCA71726D951AEE
-:10A7D000B17FD9C0F548DD4EBE6F8EDEAF5C4E7FD7
-:10A7E0001CCDD5DBDD7DF97F925DF24EDFF87FE792
-:10A7F0003E84E9F76FD1F649F47EED12FB3AAABF29
-:10A80000C1EC142D8EA3A27F1CE28757ED9A1D1474
-:10A81000D4C5B954D8F8B8CCA2EFFFF94C2E27B460
-:10A82000B897A4667529C697F7FE94913F4D8BCBD8
-:10A83000D1E27082157C9F103480DCCBC4F39F364C
-:10A840008ABF49656149227BBF8761FB2118870365
-:10A85000ED7B72B3A8FF2DCCDB2A935C542584DFFB
-:10A860008AF11B09087768E35C1CEF361B8D67C50E
-:10A87000F88D04DA27D03A4EF1F3B8CD71F379BCF4
-:10A88000670AE85FCCA7E470BEB44E33511CA7162C
-:10A8900097A1C56F6878A910F84EC99F9B89FB01E5
-:10A8A0002DCE637D4CE8E75619E33B84DC5F6020E6
-:10A8B000B9AFC5CFB5E7AA21E4F77318E769BBF2D2
-:10A8C000788E68FC6A711D37A40792F346535C07C3
-:10A8D000E9512D1E43E397083A06AD30FEA657B85E
-:10A8E000FD5E31DF44F09F5B3089FC87E716181866
-:10A8F000AEA38A2E33E7BFA8F1364D33B130F6ABA5
-:10A9000084AC283F353EB89CFD0A742D40FFECA175
-:10A91000A69DD92761CD1F6EEAA4F49C55EA944701
-:10A9200062DA3B1D25D58867874E51AEC13895DE6A
-:10A93000A112B04EC9CE9CA9944FEC3D8EF949F9B5
-:10A94000374F55404F9CCBEDDD2A619C49FE89294C
-:10A9500094479E4C616CCC33BF9F12A479737FD314
-:10A9600038E16F323B03D7E525E27D809EE5DDE4EB
-:10A97000D7E171FD18F787F4F0D84C64DF7844BC58
-:10A9800025AB14F19778F202F9E6E451745E6D6339
-:10A99000EA9E6E2C4F33737DCF383F37E7727F309E
-:10A9A000A948949D699AFFA82788F2AA39D349ED4E
-:10A9B000FBE4EA1E7388FBB1F8F86FED2DA6732651
-:10A9C0002D8E943147FAD4628A37D1E51FB7F273DE
-:10A9D0004FA638D2D17E68360A3B55E463D202775F
-:10A9E000E545D8496F8DFF5111AE8733FB7E9283C9
-:10A9F00072EA4613D8F103C8A5D4022E97CE196D7A
-:10AA0000AD12D86D6FA4066621BE8EC54E9FE08440
-:10AA1000794D4B28373911DEE0CF6594938982DE7A
-:10AA2000CEA91C3E67A55F9A03FD365B613D43FBE3
-:10AA3000C480E2237B3D3055BA0DE06E9684FDCE96
-:10AA4000D478B2DB0BD4783CD75BD8F80EC555CBA5
-:10AA5000420EC8420EBCDDD493A3E482CAED5C234F
-:10AA6000A3BDFD8E385F7E2793DD5333803F737D1A
-:10AA70001EB70F27CB6A31F291FBE1B1EF54035FB0
-:10AA8000C8266F88E8976E5791DF0FDACB3C3DD030
-:10AA90008F94F1D3528C4B6E4EFF6929C695C82E08
-:10AAA000AFC71F915F9FC7F9B812EB21DE621B4A47
-:10AAB000518FFDC3FA8B87FE8AFEFEFEFAFA3173D0
-:10AAC000B8165A7A872AB03EBD9EC026A4DB8519E7
-:10AAD00027E8BCF587296F1DC7F888B78C6DE3E2BE
-:10AAE000500E654A826FB9BD76245FF36BF2B8F6FB
-:10AAF0002385DCAF097288C74F16F37B34D5531911
-:10AB0000ADE76A115731C1C1EF254D28CDF436C3E9
-:10AB1000D46E61BD0ACAE909C7FC71483F36355099
-:10AB2000EA2F1EDC0E631EA31A295726AA1179F8F4
-:10AB30007B53813E7FB3579FBF75CCD7F991F935D1
-:10AB40001EDF8B38EF97251EA719BC8639689E6ECD
-:10AB50002988F652E18B291DC27F4BF184FF2AF62A
-:10AB6000732F8E61549EB4D3B20DEF17687E705967
-:10AB700094177A9825C345F8203DDB2B89B84437D4
-:10AB80009DF5B07DF73B38FEA0AE09FAD93743A555
-:10AB9000759C6433B0EB71AD975AC87ED2D645B37D
-:10ABA00015F81BF058966A89417E6F367A37605FD8
-:10ABB000728C5945BD5A1E67A1BEE59F29A4979680
-:10ABC0005ACD14DA7AE8D118CA9729CC8FF1180037
-:10ABD000E2544CDF327A430D385FA887F36D76324A
-:10ABE0009257729989F434F44B743DB4C6106234B0
-:10ABF000FF7285E22D05CCDABA8391E8FB13625D22
-:10AC0000CB06162639966221397618FAC77E0FBD13
-:10AC10002E77901FAD40BD1BCBCF5BF2E9FE4D7D83
-:10AC2000DFBD22C580C015083BCAD9C5EF7F69EBDF
-:10AC300059932FD1EB19A4608E3B89711055FC07F5
-:10AC4000A691847A9F913DAF9D0FA65BB472C58794
-:10AC5000E324F7D5E7F7AF92443E353F93D61B5434
-:10AC6000091B4AD0FEF8CD5F906F35F9B075C5CF9E
-:10AC7000483E5C8AFF8207293FC9EEE0F8CF4FC308
-:10AC80007528C7E4A7A1BE6B767A557F44BE0096AF
-:10AC9000D13417E207EA417E4AD5891C25C2FF97C5
-:10ACA0009AAF92B0847ABE0480E390554DC3F53AD2
-:10ACB000C0B8B57CDCD87FECB81E1817EA1DB2C34B
-:10ACC000B8506FBBD51C36C40D34FE1815C7BBDC9D
-:10ACD000B8804E42EA248167E08B20FAA50ED90D98
-:10ACE000C49F93447CEEA1443E1E2BD0C7CFE4C446
-:10ACF000C0F8E46FD5C7CBDC286D6E41BDFC843550
-:10AD00006E1BF2E36F049F1C89FD590EDA55BF9943
-:10AD10009E7718E5CA84F8A52DC824935827C91B27
-:10AD20004DEE5D483E518679907FD7E603DD7F98F2
-:10AD3000F5D674ECFCB0F3891CD47F201FBE979F1E
-:10AD40007829FC1A3F6A70231FE23AE8E3C328F827
-:10AD5000353E62B7745280E116B04B31D5EC54C623
-:10AD60001A781CB89ADE3F3F60E20996063E8FA52E
-:10AD70004182FB46E75A8A371B312CE047B8A68D43
-:10AD8000FC7CA882953D33F2711F06F0D6FCFF844F
-:10AD900037DA2EBF5C3CB40657F43AD6C69726EF96
-:10ADA000A478E8FAA9368A8F1E27E24AEBE71B2827
-:10ADB0004E08F66F64F7D7314B08E5F0B5C28ED672
-:10ADC000E2F47F2571FF6770AF59DD11618F5F1A63
-:10ADD00027AD521C7670098FA7EEB3B76BB9BDDDF6
-:10ADE000A7D7C4BD80F6515C96B7DFAF52BCC4CBC9
-:10ADF00012AF1F9CC1B8BD5E23CAE738443C05CCE6
-:10AE000025A93F5EBDBD8311FFB7DBB3A83C45E676
-:10AE1000FA877D8FEB9FF64C6E4FB6DF9947E5B012
-:10AE20002F1886789F2583FDCCCFE7F9FE20978FDA
-:10AE300017EDA75D9FCFEDB23E3B47E4A3FDB2CF38
-:10AE400066043622DFCF29F20D9580AF6699B8DF10
-:10AE500015F86E33DE89A9620DDB956CBC5FD1F00D
-:10AE6000AE219BF8EE29E2BB42E0BB6C1DDF85F210
-:10AE70004773F98BC254E3BB3E7E2B888E870BFC55
-:10AE80001CFB6977767E5087FB8A2E33D1418B6B12
-:10AE90008C5EE711F09C347278DCB24CF0EC1E084A
-:10AEA0009E2BE1FF487E1BC2389F0FB60E86282CD2
-:10AEB000682FE95F076B3C81308EDBB71E96F37D10
-:10AEC000E42570CB36E28BDBEF9439BFC6727D8E02
-:10AED000E749C9307E8D18FFF695FE4A27D6AB911B
-:10AEE000080F355DB514F7C52AF9B99017FE203C57
-:10AEF000CD42CE69E757D344FB298E1A23FAE3A645
-:10AF000056EBCF91A6D9F839D5ED538D1F46DA3DD2
-:10AF1000D3D8EACF314E711A9E3369F5818FDECFD7
-:10AF2000B7BBE9FC5B65F978CE7458F859CE015F80
-:10AF300023DFBF96386FF3FDC077F94F1695A03F1A
-:10AF40006E7CD282ED6B20FFECA6E1947F2DE9FBB5
-:10AF50000FBC85E55BF3285F6990884FCFD5F2F68B
-:10AF60000565774ECA8C43F92FFAC5F584FBF59831
-:10AF7000407B0DD4F38CC82AC1F8D14AE137387729
-:10AF80003FA3F29B46DA7948EE3C95FC7E9531A2D0
-:10AF9000FC07BCDF3746FD4709C6115766F54E472B
-:10AFA000FE7EA3E4E5E1983F2C7D3E7DA03886C27D
-:10AFB00002293C0CF052E9E2F5AB4B7E9E827E9872
-:10AFC000CA0A9E2FF496AFCCC672C3F9E903DDEF2F
-:10AFD0008D11FB9EBEFB6A625DBFE83B41F7D3FC6F
-:10AFE00016C98B53F48F39417E0766931CE83AF3F8
-:10AFF000FB3215F4738FF3F138D30ACBD264945F2C
-:10B00000B7044CA5182FECB08C3A8C7104F163CACC
-:10B0100047235DC75918D115F83CAE00D6D7B4AB5D
-:10B020003F1F1A87CC65D3F3B9C647351A7F57EA55
-:10B03000F918D6A71BDB5F4EDE0EC6C730FED00266
-:10B040005C67DFD3EB9BBEFEA2D65B74FF83C901B6
-:10B05000FC89948BFD7074D2BA4AC3E8BD6C5C77EE
-:10B060006DDABA1B89F33019BAE99E4E86E41D4E9B
-:10B070001756C7782DA48FA2E0D6E04B07D9C64A51
-:10B080002E850B7F14CD5EE43F6EF44BA48972686D
-:10B09000E763AE7EB860FC1B100F6C3987678BD4FA
-:10B0A000C0E586D81F68FE8C3A6DBEFBF5F32D8B8C
-:10B0B000E1F7D63DE877C276EE51C3BF0DEE7AA137
-:10B0C0004FA75AFC8F9A610EB73967113FDC011AFE
-:10B0D000CD09F3FF5B6AA006F1D12C055FE9C92415
-:10B0E0007F3CC57700BD271744D8011A5CD1F8A86A
-:10B0F0001B441E46C31D8D877EFA742763AADD7725
-:10B10000EB9B57D47CA2ED02B749EFCF7309BF9BED
-:10B11000ABDFCF5680E5D52CC64B7E36AF44FBA8BF
-:10B120006AD0F32847ABAB18F9475C3603F9D9343A
-:10B130007D3F187FDF703D9737D50B99B84FC7E734
-:10B1400011CD5F4358CF83F49E8345DD381BD7ED87
-:10B150007C9B2E0EBEDAC6FDF32B0B24E197EF1974
-:10B160008D7E89BEFC25FEE09ED1283FA6CBFA73DA
-:10B17000AAEA8BDC1FECBA28515AED3D311AFD2C9E
-:10B18000AEAA9ED128871E19EA5B85743D6EE0FE4B
-:10B19000F24BFC160506CD1F7C457C174D0FEDFCD0
-:10B1A0002F26CDBF01C73923759761E1862C713EEB
-:10B1B000C30299C8974E476639FA7140CE7DF30DA8
-:10B1C0006E1EB108F035262310C2767730FF78BCAA
-:10B1D0006BE9AA0A18F97905A3F92F12F31F2FF4C6
-:10B1E000DFF9CD3CAEA2D257F0041E89D41F35B290
-:10B1F00010AD3F1FE9B1FB04FCE741D585B1FE2E40
-:10B200003BE9C179AFCFA27889FC0D86FE772BE0B0
-:10B21000EFB0508CEEDD8AC29D2E5DBEB83345572F
-:10B220007FE4FE2C5DF9A8F0705DF955474B74F989
-:10B23000D1DDD7EAEA5F7DAC4297BFA66792AEFE4A
-:10B24000F74E4FD6E5AFEBBD4B57FFA3BE7DBCD04D
-:10B25000DF415F7701CC7BB6C69F1767EADAFF292B
-:10B260006EC251E4CFD9AB79FC77396048F78E478D
-:10B270001BD7F30DF007E93B9EF552DC5D5D48F20C
-:10B280008619C691E9ED8005FB3B088F97BBF79EB9
-:10B29000EF9E6140D3F78302116F7235BB9AC78D61
-:10B2A0007E3B5DF358CEDF4557B3474F57ABAAA758
-:10B2B0006B6C819EAE76AF9EAEF163F47475FAF45A
-:10B2C000744DA8D2D335D1AFA7EB90697ABA2607CF
-:10B2D000F4744D9DAFA76B7A839EAE198D7ABA65D3
-:10B2E00006EFD5950F466F4D1E66B72ED2D5EFA34C
-:10B2F000BB7F3EC511E5B6FD58D7BF46F720FC41E0
-:10B30000BAE73311EFF83FA47BF2303DBD417FA493
-:10B310000C1B4D7A3F1DD369F9C2BEF60FACF73551
-:10B32000F913A96723F79783C9A54BF48AD86F0E41
-:10B33000AA57A2F69BEF31D07B34C86AF21FDD29F1
-:10B34000F8F3500CC7FB1758740DD4833A6300AE62
-:10B35000F7106E18E7BD9842F20BDCC53A8DD8FFA6
-:10B36000DDAC9BD2E9AC97D20073901E9DC9BC9412
-:10B37000CE667E93F013DC302C11FD073D65A88767
-:10B380002FCC78EB389D2FBD917045EF3D7C88E741
-:10B3900018B98C9D12F2E0249E6740FEAC55F8D39C
-:10B3A0007C4C7547E0ED94F0FBCD1C27913E647218
-:10B3B0000CC559CDBC43227D32F3FFF2F48E61DC23
-:10B3C0001E8D4E9B1B35FCF17DCADA612AC9F7340C
-:10B3D000D629F41E0BD8B2A91F7EFEF0B489F693CD
-:10B3E0001E0B87EF798929635C74ED8CE8EAB170F4
-:10B3F000789E37320BE2F339165091188F2820A22D
-:10B40000F87D87E1C81F33FFEF5B59E82F8B59B5F3
-:10B410007B6AE535783E125C4AFEEA1F30BDBFFA12
-:10B42000EE0689FCD53F003821F538BC1ED4975A6A
-:10B430003E88F0C23C2AB11E7C1FE26990D03FF4E6
-:10B440000FEB6FCF8F79BDBFB3BFBE7E18870B7F69
-:10B45000907E9AFFB1C0C0E3157AEFE7FB94ED3F11
-:10B4600060DC8FD6182C0FE2F9A40C1B4A8C6732D3
-:10B47000F27BE86B8765F2FB6EAC9BF6F9EC8866B5
-:10B480005F0648FE16897B0E67C5F9DEDC0E0BC32E
-:10B490007899A2DD075D789E371778B01BF5B0125A
-:10B4A000A077568A36BEE6E2FE37A313EF2F6AFA7C
-:10B4B0007F703E55D8A988FB02C0770D03D91F7B4A
-:10B4C00086F373FAE6A6EE61781EA7C1F370D35136
-:10B4D000CACB8A97E20CF11D2667447B931BCA23D3
-:10B4E000E49D6283F61172C868F3D36326CB9BBADE
-:10B4F000E99CCF28DE8B5A91B6C81188D8C7BD30D9
-:10B500008C8FCF2C41E64862C204C754398572ED56
-:10B51000AF8CEF67CD1EE827527E5E4C64917EFAB9
-:10B52000D6A66304EF722910C04ECC392C6C05FAF4
-:10B530009815BC730BDF37DE7814E3A94CF645DEB3
-:10B54000B03A38DECC1EE542A43C7D7598D8470B56
-:10B5500079FA2F4DBD85384E73538F862F86E7A617
-:10B56000C1647E8FBEB9E913FA6EA85289DF5EDD31
-:10B57000987F5085F2E3F017DFB531BB395CECA260
-:10B580009BF4EA74C107E8134B07FE39DE68243EDA
-:10B590005B9C6E237FFDE237730FFA603D9B60BAC0
-:10B5A000F27780BB7F1C8E279390A7C04F7E940FAD
-:10B5B000A61485FCF62EC764A2D3DFDB9F865F93BB
-:10B5C00095D17B44A6741BD905570AE7B9287D0598
-:10B5D0007821F9BF58E0457B5FE9F8038CF60B8BC7
-:10B5E0001FE2FEBBC5B58CE2FD5923FC94F5F38D3B
-:10B5F000A66712F12518F8D8D6042B0EBA78ACC974
-:10B60000C202F96087607C7C763F1DDB7C8A138FE9
-:10B61000FAD754BA6B307D6CCCC936147F8F8FFD4E
-:10B62000B21B53F4D5E3F88E061642FB98CEE061C8
-:10B630007CE77CC8C3F871A23C2EC0F3F1A23C7E2B
-:10B640001ACFA7FB5E902A11B0A873A5749B6B62FA
-:10B650000ECAE9D98CDFB716EF2D6C11FA22D5E6A8
-:10B66000AAA9C4F2BB19DDBFD0CA9F14E5C9B60FA1
-:10B670005BB3518F4CD5B7DF28F030C4F661DB38AF
-:10B680003A7FD2976BE73B89B6F347A97D91BE7CA1
-:10B690009D686FB79DEF1E87E539FAF11F15E5B17B
-:10B6A000362E0F999FF1770144F923A2DC8AE53801
-:10B6B000BE9797CBDAFB17A2DE4A0107C6B691FF09
-:10B6C0007318F77F6E6DB214115D9A2E127D1E6B8A
-:10B6D00062949F34DCC5EF6557717CBBDC9C1F1CFA
-:10B6E0008D6CC0F700260DE7FBAA38B5C7E71B40F5
-:10B6F000EE69E52E077FEF40F698889FCC3621371C
-:10B70000C47AEC931B5283973319F7975F8EAF611E
-:10B71000A15D40FB6828FC205FA73D60608108793F
-:10B7200099B230860522EA7B66BB74F9A4BB5374D8
-:10B73000F5DD53B374E5B6D2E1BA7236D545EB66A2
-:10B7400091E0AF98A2125DB9F60E03DB2EEA89F5FF
-:10B750006BCCB95657EF7C811A8F3C7E6A22E81F6A
-:10B760008A2BF05A503E2CB2670D41FDF35CD31882
-:10B7700042CEF3B0AEC06865BB9C3CDE7C179EE356
-:10B7800041F9BF36F9E8FB0E2857217D1AD69D0AEC
-:10B79000F53B9A1C947FAAC943E9962695D2279B2C
-:10B7A0000AA87C639397F24F40FF98AE837EF0FB2C
-:10B7B000DAA62ACAAF69F253FEF1A669947FB429CA
-:10B7C00040E9234DF3E9FBCAA606CAAF686AA4F4B0
-:10B7D000E1A620A5CD4DAD541E14F4DE25EEAFEE4E
-:10B7E0002AE7F7D2A3E9F8F07049F75E9CBD3F7EE7
-:10B7F000E4E1E1183FD2D94376B8163F82F3A6FEC2
-:10B80000AC7CFED1FD6D1ACEFD09C359F7D258BEEE
-:10B810009EE99C3677BF77592CF07D6A03A743E6F3
-:10B82000FE5E2A4F9ECF69B149E865E60EB2B4329A
-:10B830003AADA77A67A5EE8A587EBE4DFE0CE6812A
-:10B84000799689779288ED4206844B19C3F5A7460D
-:10B85000D7BE793B399C38FF81E0DD21E0954B3B39
-:10B86000F9FB27556D6164FB185F03BD7F6299E6A4
-:10B870000F2B90BAFD017A8F61F8C509B0390379B1
-:10B8800073F17AA6429AB650BF6F4B995DA2DB174F
-:10B89000C9171F632AC8015B917E7F1593B348D7F0
-:10B8A000CE92F6635DB9C9BD4C573EF3BECCE51EE2
-:10B8B000C4672A3FE731AF5ECA9201AE39ED6B082B
-:10B8C000AE77041DCF4A2ADDE30EEED6E21EF8FE67
-:10B8D000E259A15F986535D963F94E9ECD8B0F1A59
-:10B8E000503F7CF66FF124979E79CA10427F2E88D4
-:10B8F0002703AEFF4230FBB0BC98F5501E435630D4
-:10B900003F8AA932E6AF62BDB4BF82FDC5EF866350
-:10B91000FCA81C78CA0AF933E9816779FC5A98F4C3
-:10B92000679EA0679EB69FDAA044FB79DF1A4E7C23
-:10B93000A8BFC7D622F6172D56EE7F5BEA2C1B82D6
-:10B9400076EBD941E20DED9E578FCC067CDB930F51
-:10B9500052AA7D7F54350C784FFB8F51FC3F0C98D9
-:10B960005DF0FF1F119E33A56F27A11BAA2EA7977D
-:10B97000D6C159C9E79981F87D5DE6FC083B2E9C4C
-:10B980009F22F0ABEC2EF7CC003C2A6F667B83AC99
-:10B990007F9C679A8E65633C8096CF13F1B23B9B88
-:10B9A00092732A23BE3B0B393C05ACBB0AF55541CB
-:10B9B00091C11BC28E7D0E9D1FC39AD3E6C377072C
-:10B9C0009412E64531378CB52D43DDADFC4DA6789C
-:10B9D00027E5D0354C85FD8CCD1666181FA6F5CB16
-:10B9E000843FE4012137BF7454C6D37B92297DF292
-:10B9F0000F7524FBD2E6EB463EFAB2DDC8E7754888
-:10BA00005F5E60E3715C730B4C2155C2F7CBDAE8E3
-:10BA1000BD4465ABC4D232118E718407B62F96F83F
-:10BA20003076C3081684F552EA0CFC05F9E44C584C
-:10BA3000DD67C8163C09F56A0B4DDBD03ECB47BC31
-:10BA4000D8102F77E654E2D0390584DF3962DE79E9
-:10BA5000857CBDB6A447C1C3BC3E7C57746EBBE6B3
-:10BA6000C7D1CFF3D1D28A5BF1FDC5E66E99ABB5F4
-:10BA7000287CAE32768F98015D9FE901B8648233ED
-:10BA8000AF10E5C2863216243DCEE757FB94C4368C
-:10BA900065925CAA223D3EDAC022CF31B5B4B8909F
-:10BAA000CBDF9786F3F7DAEC9E23C48FFDF9C3470B
-:10BAB00066033E9E33B0023ABF35F0FDB116372320
-:10BAC000A31F00D29F146AFED2163609F5B6D340E2
-:10BAD00071A072470CDD4F959D0AC59FB7D82A1DEE
-:10BAE000F7623F0E85CE6B26C863BBD18E363B0D09
-:10BAF00057A11D7E78DB8FBB317E474E5718FABDAC
-:10BB00005A1C0AB743D20C1497A7382B2D78BE9332
-:10BB1000673B598EF83CD8F1437A8F417E50C4CEB2
-:10BB200008BF985190AC853550FFC13445BCEBE25D
-:10BB3000AB1E95248E2654DC0F557D82FBEDC38E03
-:10BB4000F356DC17A8B6B9E40FAC2BE4FB44239EF4
-:10BB5000E341FEA925E79D28BF5EEF58EECA447B6E
-:10BB60003AA4902D52F075730ABD3BD061A27711B3
-:10BB700034BC660415DD79607AA33E6F8E3A1734C3
-:10BB800046DD479B85E3939F781A0B47CCC7E8E1D6
-:10BB9000FB37E6B6D1FEA7AE50BC8729F273300F53
-:10BBA000A4D8690CA678013F873AE666E0BC2EBCB3
-:10BBB00014A0F8EFC1ECFFD242558C17B41AE8FD7F
-:10BBC000DDB015E3C1B737312FDA79969042F1F83D
-:10BBD0003B843CCBB171FEF717713E8F4E73DAF8A0
-:10BBE000BA5376C58462916E8ECE9220ACF3C25762
-:10BBF000273215F4608EC367407F7C4EA3C98BF655
-:10BC0000E7845FDA884FCEDB783C95D2F8888ADF0C
-:10BC10009BB7951544DEB30B3539BC289FB6355913
-:10BC2000BC18A31E1A44BE663B0D14C7AE1A785C3E
-:10BC300065BB588FED85B194AE1572E6692538194C
-:10BC4000E17C1AE889F1F3075773FB78D1520BC1F5
-:10BC5000B1E8F56CB2AF06C3DB334D1E6F0EC2B355
-:10BC6000DA9082FEAAF29539ABF09D8C4576FE8E75
-:10BC7000B01C3F9CFCB6EC774686F67C73DCB5DEE8
-:10BC80005911F25D8E1F5B807C25CBC114F4E7FC5B
-:10BC9000BCF0DC6D18570BF4DB84F9DDCFFDE13629
-:10BCA0008CA3DD690FA6609CED4BCFBDCFCB13837A
-:10BCB0009B30CEF6E073C779797A30C500F9D79F0B
-:10BCC000FB9097E7063761FEADE74EF1723C030348
-:10BCD000D9F9DE739FDE16447F8BC93B1F05F22F17
-:10BCE00000FE2258629D22FD40E0452B7F01BFC32C
-:10BCF000066C8F48A3CBF78976FB0729FF9528EFC1
-:10BD00001AA4FF03A25D7890F68744BBC383B43FB7
-:10BD100022DA1D1DA4FCB7A2FC8D41FAFF77D1AE3B
-:10BD20007B90F66F8B76EF0ED2FE0FA2DDB141CA8B
-:10BD3000DF17E5FF19D5FF7151BF477CCFB2AF7E4A
-:10BD40001FFDF7592047502E15D857BB709D6F6BBC
-:10BD50002D25FE6F2EE3E7541ABF67498CDEF7AD41
-:10BD60002EE2EF8A551771F9FB67D13FF0E1E3C886
-:10BD7000778BDE9429AEA7D9E03D1D4239BACA407F
-:10BD8000F6C0A2D7F97E7DD14A2514792FE7CF518D
-:10BD9000F02F47F880715B3085F576A690C7F59B4C
-:10BDA0003D1E6F75843C333AF47990170CE52EC82C
-:10BDB0006F8ADF2E5859D15A00F95497812C10A55B
-:10BDC000D612C6F73A14BBD00B8ED2B60284CFA6D9
-:10BDD000D03B059A9C67368FCEAFD16253E8DD36F3
-:10BDE000D9CECB27FC72AC03EDAC1616E8F6617B1E
-:10BDF0008F4276FCC1D61207CA3D937DB603D7EFBA
-:10BE0000BBC57C5E9575053128AFE5470D24BF0F96
-:10BE10003BF87ADFEAE1F14EA057E89E13C86B2F9A
-:10BE2000EA887C165E8A7273E763FB66703F1FB315
-:10BE30008F2AA37B44DAF9B6A444EC03AE2BE2F8D4
-:10BE4000C9107A4441FD02E9D3A5E2FE4B90FBA361
-:10BE50003214E6498DB8C77B5D91CCEF1F2988234A
-:10BE6000E84BAEA6F7AB862E5174E708690FE8F3EE
-:10BE7000A628BDA144E995EC569093BAF313872EFA
-:10BE80005F5424FC3C5EE6453B76C22F57933C3C16
-:10BE90008FFA4D1A5CEEF5C95F218F9F4604A01CF6
-:10BEA0000DF27BE4075797FC16E9BD68A581DE8D8E
-:10BEB000BE5239FA678405F0901B90482FC0845217
-:10BEC00070DF74393CE41AFD2E7A57E332F8C85D0E
-:10BED00057EA42799B1B50A8FF4BF4C665F0F5BCAE
-:10BEE000E43D16403A3A63845D0D0C807E3B574C2E
-:10BEF00007C6179B843F458B17568628FC5D7C71CF
-:10BF00005F55167CFC30F3A9AE6C7C17A881FCFB56
-:10BF10008B773FE041BB7D8521E0C0FC51D7A45E1B
-:10BF20001C67116CFA117F3BB10F7A1FF3B7B7FB97
-:10BF300000FECE90497BBF328CFFECC63820ED7DF1
-:10BF40004C0FD96BA2FEB5B75702DE3B1547219ABD
-:10BF5000A04B775DB7DE781DD437B1BEFA78EFEE2F
-:10BF6000B9C306F17EE6B8F595209776C730DDFBBC
-:10BF7000A0BBD1CF4EFD4D588FEF81C27837C9B0ED
-:10BF8000375B5B74F37A5B723F3CEB8AA7AC5F8AEA
-:10BF90000E3BB14F7132FEAEFB19B5270E970FEC79
-:10BFA000577E5204F4ADED389914B95FD7EAC78BC8
-:10BFB000FA755DBD75BB54AABF94EAEFEF8D2B22D5
-:10BFC0007CF79645D68F137E8088FA2BBEAD7E8196
-:10BFD00006CFAEB76F2FE2F51FC5FA67D59E248A4C
-:10BFE000AD898227E1D2FED77E5BFFC345FD33E1F9
-:10BFF000B7A9FE59D693549C49ED3661BB736FBC0B
-:10C000005D26E69D84E738EFDA7C4F16815C6AC0D6
-:10C010003ED07E561A54FCDE696973A0FD6635B6C3
-:10C02000F9510EE7E03B5F63FAD3ADA83C465FFAF7
-:10C030003D9A9F3B2D2CA11AF9B5D140FB9BFD3DAC
-:10C040008647902FB7A68D75E0FE79B7A9BBA408E7
-:10C05000EDD7BD36B25F0D199F59D16F6ECEE7EBAC
-:10C06000DFEA6CF01641DE9A5E44EF74CA0F2DEAE7
-:10C07000A4F7C27FCADFD1527E660A6C477E0C2FBE
-:10C080002A9813B1BED7151B09BE95AFD956E3FE4A
-:10C0900060A5D1DB968F76B85DA1F84BE567FB26EE
-:10C0A000917DF80B0323F90FF3AC807E5B6628F4D7
-:10C0B000FB0E4E14CF3C5844F8F0FB2BA0DED044CE
-:10C0C00045C27B3A0F2B7E0B9E7798855DB7D5CB0B
-:10C0D000EF6969E37E2CECCF8F8BF8BBEE5BD32E40
-:10C0E000BC37CF8DEF3098E87EA56DA1216C8AC357
-:10C0F000FB66DB4ECF437AC6F6ACC4FBC631298A59
-:10C1000003E7F7643594D1B95C277D0FD61A68DF51
-:10C1100090B0D0E043FF634C8E49E7EFB0C1389157
-:10C12000FE906F8A03C710EEABDE546E423C7BEE8E
-:10C1300037D03BA48F7ADEB51800CEB8527D7BC7CE
-:10C14000587D7B57A5BEDC5DAD2F4F9AAA2FF7DC3B
-:10C150006D8AF2EBE8F33334BE029960033D15C3F8
-:10C160008B588CED4213EE7B56BC16C3883E4BD6E3
-:10C17000B7E5E3FA8CED257CC50C8F21BFC08A643E
-:10C1800013C9F515C5DCAF7F28DD7413E5615EC802
-:10C190001F5BD38ED07EE412BCD84E7F8DFDDB5862
-:10C1A000C477B4338A7D7F291ACDF39E32F4E3310C
-:10C1B0009287CF4B3EEF41C4F75BDC5FB1B591FB9B
-:10C1C000B11F9DCAE311690665B8DE79FD38CBEA77
-:10C1D0006EDC97C5D95AEFC738CB68BC2689F38681
-:10C1E000AD78CB16F92EC0DF675EAEDD77C2EF65A6
-:10C1F000747B81DE1F1B3F82F38B53D809F19E8431
-:10C20000A296887B1349C26FF2F8D89956D41FBB07
-:10C21000C57B1E7DFDA934280F3D45BF72B124F6B4
-:10C2200053BCFD7AED9C47E4139D3CBFFBB0EB266D
-:10C230005C5FEBA7BA4A70BFBF42D877F16926DFCF
-:10C240003098D7DAA3A6A03412F20A3B6C04BB6084
-:10C25000B78B8F6B7A3D2688F7F3D67A4AE9BEDF33
-:10C260007562BC17CABDEFE07AEF857584715F6BAC
-:10C27000DD5E6B8938370D027C685AE03EE56075FB
-:10C2800009ED77D7FABC56D49B6BD3BC568C97B6C6
-:10C29000262B0E8C077579147A8F6DAD25E040FB47
-:10C2A000C7058AD484E749E96D13E99E1BE0DA509B
-:10C2B000C68F1A988833C438BF0481CFAD9ED90E7B
-:10C2C0007C1FC19DB3E747E8A74FC0FEE2783BC49F
-:10C2D0009353E0697CB14A70BB45FF09B35FA0FA94
-:10C2E000F8D35216D19FA0A369220BE13E4D1B5FEC
-:10C2F000EBA7AF7FE6A37380E5BFE5785B9ACEDF5F
-:10C30000A132DDC7683FF742796027F2596F720C9E
-:10C31000C9BB144F4A05F251CAD14D93F1FEC3F285
-:10C32000DFC6F071E6707E4F5198E57A9C7762C067
-:10C3300081788C5EAFC987DB6A902935BA44AFDF5C
-:10C340006485B5CAAE4BD771B2C75D91376280F5CF
-:10C350001CB55E928FF63E88FD47AFEB2DB1C74707
-:10C36000713D12F15DBE7CBE45EA5949723859A152
-:10C3700075961E351EBE6787798919548C4F5E5796
-:10C38000ECD4DEAD5211AFBB4D8E71367EDE4EFC6D
-:10C3900055F1E2EABB7E07F90BF87B73A056EAD1B0
-:10C3A000B66ED28BFB03F9587FB312780AFDE99B76
-:10C3B0008F0DA17722CDB1FC9D4F53D4BB259ABEE2
-:10C3C0005857CCF7316AD4FB96DF35ED4C4B2B74C4
-:10C3D00000CFAC7BFEB77FB024FEE3ED9FB4C39DDE
-:10C3E0004B6DB0A6B7ECBA653DC6475ADFE4E59B96
-:10C3F000211F54102F0BC9EF7268E8BD34FFE6F718
-:10C40000CCE4CF2A96BD1B30CF3EB0923F6EE7DE24
-:10C41000B1D3709D34DBCB54B4F79F11F267BB5896
-:10C42000CFD1F3924DDE00DA03D1DFB7168B73095B
-:10C43000E63DD601F42D7EDA44EF25F5C547745864
-:10C44000F9EF331376E86C21CF66EF5B35F420C348
-:10C45000F7306AF615C3B8B3ED9549084FEA458938
-:10C460000540FE6D16E7B3A9EE1724943369EEC3B9
-:10C47000E528EFD359F752941BE90DFAF3B2D48BA8
-:10C480000AB5DB9DE2A3FEF007EF399B9858D3AEC7
-:10C49000005B8A723E859FB7981C31FC7EBAA7521A
-:10C4A000779F597B47F655810F13E0D45802A94D69
-:10C4B000E1F7E7A3EA1F15F892D16F8FCE7FC791FE
-:10C4C00063D4AF4DF92CF25D16DC9792D05AC8CFE9
-:10C4D0003F014F41DC87B278173F2FF5F9D4C8B838
-:10C4E000D65490BBE6128C3F09529C48B2B89FA02C
-:10C4F000C5F500069CE877D3E23EB631BD3DA2A566
-:10C50000DAFE3CA751A67D47E1AB56BE3F686521E8
-:10C51000AB84FE3046722767353F9FD6FC62D5B8A4
-:10C5200098683D380C3CFEA793E29935BB0AE84B6E
-:10C53000726765D47B4FDA7BD55F88F5B4B9C941A2
-:10C5400074D4CAD302D174D49F736AF5522FA6B2A1
-:10C55000404264BF21EA37B5710FF143EAC5A154E7
-:10C56000BEB949BD4CFF5983F49F4CFC3278FF693A
-:10C5700054BE25FCAEF31640C593BD7B9C7E15E5ED
-:10C580004A78A277003CA73EA0979323F7EBE5AE4D
-:10C590008697CD8ACF5D03F8DEFC80C1DBC130FE1B
-:10C5A000545FAF2AF3F74EFE7EB4563FEC9E82F501
-:10C5B00017F2FADF3BADAFEF2FDF1B5D9FE0BBE172
-:10C5C00062947D18459F687801AEC4DB22E01A674B
-:10C5D000D1FFFEB869332E812BF18E08B86EF4E8D6
-:10C5E000EB07960E0CD74D05E66F854BAB77EB98B6
-:10C5F0002BAB173D8F2955E641F0CEEBDF31EDCA6D
-:10C60000FAFDFEFC6FAF774F63F43841EDFC4867ED
-:10C610008F243472FBDDC17A29CE44B33B5CCC213C
-:10C62000E2BFB8DDF00EFE17F6B34B46F86F1D31D2
-:10C630001AF1EFBB7B9D8AF754B8BE62D5FC7D48EA
-:10C64000D8971447BE7FDD0FD732EAF7658C772283
-:10C650003D6BF1A2DD5998CA2CC9687C794259F822
-:10C660000ED8F4119ABCE6F1E5C305EE9E4FE95CE5
-:10C67000E4A4751E72213CDF75DC7B47F8E68C482C
-:10C68000ECAF3F98BF45C393C9D449BF3FA1B7D6CC
-:10C69000E645FDF02E1641BBA76F3787D1AED6E237
-:10C6A000508FC54E3F92A8D2FB038BB1FF69774CE8
-:10C6B0005C8E79E95082BAC886F7977AB47B9E3F40
-:10C6C00042BC2DB40432920C74BE9A8FFB61E64FCB
-:10C6D000109782FDC503C56968F0544A1CFF316993
-:10C6E0008120F65369E8DEEAC76F4A37DF673B12FD
-:10C6F000F9FB47F8CECD00EB5FC34385E8E7A0D157
-:10C70000FB552FCCEFE09A78BA0F3F3BE18EE9F86A
-:10C7100036CA1C833F090FD023E07E8CE0B6CDC81B
-:10C720004846B88D026E4BA2C0BB2FE7DBE0EE8B14
-:10C7300097F9A9A4BD534EF917834EBA776E367C8C
-:10C74000F1EE14D4C3C5062FDA9D9BC1BEC077D6C7
-:10C75000FE8FC0F7163C6371D1777A7FCD23EE5FF1
-:10C7600079D61BE8BD157FC54B44A7A7EB6C5EDCF3
-:10C77000B7CF602ABD6F3A4BDC47F963F97FBFD270
-:10C7800003F3DB3522F02CD2E79E04C3D077098E69
-:10C790004021BD6735F6CAE267B573F8C9C23E9855
-:10C7A00023F03885F9286EF7361630E2B86F9F35DA
-:10C7B000F9D02E7D5BC423DFC182F4FD4E16A2F4B6
-:10C7C000FB2C4CF57F802FB742FEADD811E98D00D0
-:10C7D0005FCD13F9B9B81E23F0FE8AE0977BDC9C8D
-:10C7E0005F3E1E82786F4FBC22FEAD9138FE968C64
-:10C7F000081CC1798FB3A86E2FC2E41897867E9467
-:10C80000BEF55399C8F94F71E47EDBFAE93EAFDD1E
-:10C81000BBF7D992CBF0DD2DFE73A3EF3E8A17C78D
-:10C82000B87C37D0A15BE5F70D416CD88340A7AA4F
-:10C830007299E2F6567C2EEE49A31303EAFD669444
-:10C840004CEF8469E792B788FE6E49E3F706ABCBFD
-:10C85000A7B4C4035E267CD5531A86B42A4D7F8FB5
-:10C8600070A2BB839E0E9F94A3FF7E136BA303E273
-:10C87000EA227D9CF92D51FECF833836F0D527234F
-:10C8800044BCE470363CF2BEC1ADA2EDF9EA2F4CD7
-:10C89000E760FCF491815EC4E3A29BFF389DF675CE
-:10C8A0000A7BF32A985FDDBFCB644F7ED80433C97F
-:10C8B000C7B86A0BF381C17F0AEC0ACC9F6EF250B5
-:10C8C000FA29D801987ED65440E5679BBC941F3F57
-:10C8D000D2FF17A4F3CCD6CF15D4472BB4786C0174
-:10C8E000871657B842C44F2CB62F3A86F10B8B29C6
-:10C8F000E09DC1626F9B80E0DFBBBFF308A6F05DE7
-:10C90000C67DC8E23512F975E61C0E2C4732CF7B86
-:10C91000A3E7161413A37F7F3209F7E9B568C702AE
-:10C92000EB2F76F92C23617C5FD789230950FFE335
-:10C93000A63104DF274D3E82EF4F4D55944E1FE93F
-:10C940008FA37AEC737A6FE9E65D2714FC3D68E308
-:10C950007D12F9EFAFF7B15008F0BAC1C8E5FB0698
-:10C9600090EFB83ECB8B276F7900E11B11F08C0460
-:10C97000FCDDE69A353E01BEDF32668682F5EEF8D2
-:10C980000A7450663F1F5E8EAFCF1C90083F670E43
-:10C9900038091F1A9E6A05BDCEEC2BBC15DF1F3B64
-:10C9A0007054A6F8D3F3170D04DFF96331149F1AFE
-:10C9B000DD7ED1DEEC21688FFD09E887071F8BF64D
-:10C9C00016923FFE4FCFFF488D8CFBFD93ABF3C219
-:10C9D000FB28A7FE8BCB29B0374F6D423996964284
-:10C9E000EFE8F4C5ABB18658D4637526B1BE40CE2E
-:10C9F00060FE4F317C1F5CF68BD40A5C2F381EC65C
-:10CA00007B99C5EF9B80FE8EFF18FADBB7C943EF19
-:10CA1000EE7CB6FB892C1C7F67E79CF73741FF67EC
-:10CA200042FCF74D9C619D677F85F274BB8DFC963F
-:10CA30002B24800BF5E98E14CA17484A4C2339334E
-:10CA400042B46E0B2455C177C816BEB03105F90B40
-:10CA5000EF8B635CFDCB6B62494EBD6CF41E6FC403
-:10CA6000FEB6F0FE9E7DECA10FF763FA686DC94338
-:10CA700090DE3ED245789FFD2F0B86637BD0D7F4A6
-:10CA80007B959F7B510AA31FA4B8FDE0328C631AEB
-:10CA9000B9F9842105D251DBA5664C0BD3271D457E
-:10CAA000FFC1DD235582E3AA5D9932C6A60F4F0967
-:10CAB000BD7F038F1BD1E9F7A2F6CF2B709BA9E9AD
-:10CAC000F9E152E7A71DB82F1E7AAC84DFEFE2EF41
-:10CAD00044EFED9AF2CEF719CE032C08847B8689B9
-:10CAE000E22E5828D881743E1328F0D2FB26FEE0AF
-:10CAF00046E4AF3381247A4F7A9F211887BF2F29CC
-:10CB0000789CFF5E9F17B7BF1587F114F17B8C0CE3
-:10CB10007FFF74EDA8DE09141F92AED27E3C7DEB40
-:10CB20008D55889FBA3D7B3BA89F85162FFA63E7FA
-:10CB3000EFFD82EEBDB0893C0EF5CC1E9E7FA4D2E7
-:10CB400047EF8ACFEFF833CF77FB29EF97839974BC
-:10CB50007F6216B7779E10FA8CF58C6091EF1269A0
-:10CB6000F47A048AB17C43663019DF9FD2F420E85E
-:10CB7000AF265C7FE876A4F68E29FCBEFA15EA2F74
-:10CB800093D0475A7F4F98F87BB92846F0F7CF6C7F
-:10CB90003671BDBB03E40DF28BA67761DCC7715C17
-:10CBA00093B82F930A4A7614CC27F5093397DF57A9
-:10CBB000387EF4BD52CD0E9996D04CF7473F4B0DC1
-:10CBC0003C89F241BB47CA142FBDEFF741AA6FF36E
-:10CBD000C8D1FCDD0C9C03E8C510D6AB93C18ECA4E
-:10CBE0008EB0A32C57A617FF96EA7B06DB5F69FD84
-:10CBF00068393C56C0BFD86E203C2C5E67267FD873
-:10CC00005871BF74ECF963B1284F16FFB984E44A38
-:10CC1000336303E2E795261EE7FD6BF423407ADDDC
-:10CC2000973D32ED470E1B161E01FD4A2090FFB0C6
-:10CC3000B739BE94F23E24F7F55F1A06DC2F6A2955
-:10CC4000D0EB359C9FEF2BBDFFE186AF1CF4FB2999
-:10CC500099CD7545F3EE7F67473F7FEDBD2B985F1C
-:10CC60000FEAF7C59F1B887F177F5E4272B3EB0AFE
-:10CC7000E76B75FBFE03E91A3D1F80FFBF0682BF0D
-:10CC80008FDF7BAF0CFE072546BFD707D415F9B75A
-:10CC9000BBC47B025D0B8AE85D8B7DF82E08CACD94
-:10CCA000C9FCDE5117F60DF5BB121DF4EEC6CB46DE
-:10CCB0009E0FDE29DA8B771ABBEE4CE1EF66981BEC
-:10CCC0007E578CFD37F3F8B82E63887E1F6CD74FE4
-:10CCD00013E83E81163F7E4CC8ED6629FC7D7A0F35
-:10CCE000E47313E3EFEA8553EB4BF11D90E154FF3E
-:10CCF00098F8FDC957FAAEDE5D823EED1DA11DEB31
-:10CD0000018EFF07358A15A9008000000000000091
-:10CD10001F8B080000000000000BED7D0B7894D500
-:10CD2000B5E8FEE79F99CC24936412421E8484C91F
-:10CD3000831024E0E40501421820A1A8680308023A
-:10CD4000C638212184BC0848CF492D3583090F15E9
-:10CD50006B38468D8A3A58A0A0600705440D9E01A5
-:10CD6000D4521F35D5EAB1DA6202880F1E0941FD9F
-:10CD7000B0D7DBDEB5D6DE3B33FF2451DB73FDEEEF
-:10CD800077BEEFA65FDDEC7FBFD75A7BEDB5D763EB
-:10CD90004FDBBC74BBCBC6D80895357832186B4BCB
-:10CDA00072C44542FAA1812DC6FC9F19FCC531F61B
-:10CDB0009881B9CC918C5D655F166D1FCE98F38616
-:10CDC000103D0BC742479C92C3D82315A3D9DD0A57
-:10CDD000645B1F622C9AB1C526467F4B83C326B085
-:10CDE000ABE99F0ED344C616F2CF6CC9F29D66A77D
-:10CDF00005F255E66E6502631F54DD196A83F1166C
-:10CE00003A556F501854B8B1C8D195CEEBFE2319DE
-:10CE1000C775D0B8AC6218639321D57BCB198CFB56
-:10CE200072AF89DD9D0475F06FBA2F65CCC518D43B
-:10CE3000FFCCCCC7AFF3CCB8FF8CEC0FFE5F65B472
-:10CE40006C56C2B13CD1CD60FCFD239CA3EDB98CE6
-:10CE5000AD3A7CCDFD674CBE7A15CB8BD298CE37E0
-:10CE60006EE03881E335BB752E038C37CAB420E3FE
-:10CE70000C346986021DCCD3E531BB7726E1BC7B3F
-:10CE8000FFBC02F2CD8BAFB2DF0DD939F34D0E25C9
-:10CE90008AB1BE0341EE2005BF073B705DCD47421E
-:10CEA000DD3AC8DFAA70F8372B8CBEBBF61BDC3B23
-:10CEB000E15BADD1BD6717B4AB7D79AC1D4666872C
-:10CEC0008CF01F2C7F31849787399236E460790C7F
-:10CED000E1F725832D9CCA7FAF322A0FF6A64500C5
-:10CEE000BC1B639DB310AE238200FF16EC977F3FFF
-:10CEF00089EB00F89C846E11BFAE8650EA9789BC1E
-:10CF0000F317C3DC77D37A1C71CB317FDB385A8FB0
-:10CF100013E701F362F50AADF7A4D57D571A949F84
-:10CF2000EC184EF38812F470B2F8EBB72641BD93BB
-:10CF300087553BF6F99746D56B0CC3728E0F65BECD
-:10CF400029AD1DDA9D7E31D41E04E525F7D5BC89B7
-:10CF5000DF4BEEAC9B4B69F5BA1B18D4EFBAF3A3C9
-:10CF60004467C6407C94D4422B3F3CAEB23B4A114E
-:10CF7000BFF7D89D65B8DE55195D950CE8EAA2B1FA
-:10CF8000F371A632F6FE4867057EEF79E1D35DF8CE
-:10CF90001DF094563C1E96A1073A41FAED9A407452
-:10CFA000BD4AD0EFB04C6735F607702C65298C85EB
-:10CFB00064741A711E6CDDF01F44275F74EC3CA48E
-:10CFC000C03835C11DF594AAEE09D8CF39C51BA6C6
-:10CFD000A4101C9DB8FFCE5BBD61880FA70EF28028
-:10CFE0009F9ADDDA75E19F1EE65583FF8076351E38
-:10CFF000D561C6FDC3DC469C7F0D33FAEA27F17D7F
-:10D00000887400FD3C49FBD5F297D25F001EAAF759
-:10D010008CCDBA1BF0531371F85753A91EB493FB70
-:10D02000451D9897EB19381FBEBEF3621F9C872FD2
-:10D0300006A49FBD419CFE19A78F8B7BE204FD7067
-:10D04000BABDB8678C1BE7132DF6CD45C5A50BC639
-:10D0500076BF64F69D302F66F74C9C371E67EF99BC
-:10D06000383F94B10715CE9F6A86792622BF92FC7D
-:10D070008B993C13E641394BF74C980FF55F12F54D
-:10D0800058B1278DBEBB3D69D8FE908E55213CE539
-:10D090007CAA9F8EDF4EF030F1FD5AFDF438828F6E
-:10D0A0001CA719F94838A6409F6103D7FD5BBBC296
-:10D0B000F77FE8C418E46B43E13F3D765806B2922F
-:10D0C0008B4B8CB73AA0DF31ED464D3FB2DE58B7FF
-:10D0D000F6FB61D1FFA8007C8E507B8F06C17CD906
-:10D0E000AF014E6CE078FF89ED804E9F7AAA1F7FDA
-:10D0F0002AC72763364937368213C7D39F8D124F0D
-:10D100006BE3815FD7204C927DF03A94E98C8F8459
-:10D11000F422E661FE8722200F69BD80BFCC4BB8A8
-:10D1200007D2DF9D7FAE8CEF82F6E7ED3A9A57206B
-:10D130005CD703FCB0BCD9C06E2D86F65F349D4829
-:10D140003963F0ADE76C93C301474D7FBEB23DD369
-:10D1500084FB6EC5B64CD3323FB837EFCE3E610389
-:10D16000BC9EDFADC79158B3DEFDAB2951F85DF52C
-:10D17000B818959B1C380FCBB13F60BDCA6D1159D3
-:10D18000AACDD77E457B91A3C20FFEE3766BF1312A
-:10D19000DEA3CD5F7D589BFF1AB95AEE3FDF2ED339
-:10D1A000ABCD679FD0E63FFDD3DA45B80D9ECFE308
-:10D1B000FBE63377A8DB0470ADFA68F6093C473F1D
-:10D1C0003BF47C18E2ABE6AF15AFC5335C87964EF7
-:10D1D000018F8A1ED6EBDAA510BDAC7407EE5FC1D5
-:10D1E0003706ECEBF5B41EDC59FE741388DF73CC04
-:10D1F000B3C801F455DBF86ECA996C98D75C20640B
-:10D2000098CF64CF5623B30C1C6F28FEC12C0E1B85
-:10D2100003FA2BCBE365531A67B1D3D01FDBF2C7F8
-:10D22000D9B85FCBEE5148DE287B6ECC2B4837DD7A
-:10D23000FB975C4BE9A239048772E630223F5CD150
-:10D24000A17843216FCDB31DEE8276CBDD8A1DE739
-:10D25000BDAC25C8C7CFE0FF155B02E6D1E6570E8F
-:10D26000F35F71F8E8370AF45FB54DDB6E25C00B4C
-:10D27000CF8FEA1DFF08F2FF0E8210C16B4AC776FE
-:10D2800015D7BD5CCC5F9E7FCC55C0707D537813A5
-:10D290007606FF03E746F028676E66AEEF1C9CD269
-:10D2A000C6DB03E32BC375D7598C365C779D897930
-:10D2B00043603E27428D0E2B7CBFDC1E4AF2436545
-:10D2C000107399B22865E62C6C670FC77667DF5636
-:10D2D000494EAA03DE43FD3CA1B89BB11F55E1F9BD
-:10D2E0005FF3FC4AE6A5F520DD38FCD7E9D6E65920
-:10D2F000EB30924B6AF5DEA308976AD645F066805C
-:10D300004F878423C0AD16D6F94124CA5FDAF6AB45
-:10D310009887EAAF3AFC8F20FFEF20673213D4DF03
-:10D32000160C29CDDF4D70548DCCA18379AA7704DA
-:10D33000BB5D24871407239D1AF0BC00B8B6DDE559
-:10D3400048C3796F501C6956E4635BCD76E4634B48
-:10D35000B7F373A82D02E45768DFB6F22A6ABF1448
-:10D36000E529945396707ED716E1F122DF6F7B207A
-:10D3700089CB537F57092EBDF79ADD4F42FDB64C3E
-:10D380002EF7B46D1D43ED915F923C756F286F3F92
-:10D390008FC3B56DB8D5ED82FC873845804FDB76FD
-:10D3A000479A89DA819C96E43BA7A43CFD9B51CE29
-:10D3B000DB10DF72BD52FE66553F4CDEDC29CECF5E
-:10D3C000DEAD304FE8FF8C52FC9ACE4F1E6EC9E4A2
-:10D3D000FC7FE24CC72E51CF8EF52A74F3EE9E0EE1
-:10D3E000F3AD7850676B4EF2C19D391C6908E73385
-:10D3F0005BCD5948671367021F06FA3B99C9F97953
-:10D40000480E73B821BD57F47B6FA64E93C6060332
-:10D41000FD413F678ABC06C46F684EB111CF4338E7
-:10D42000C3899F07AEE361D14F85B1F8F56983CC1D
-:10D43000A79F0E0AB9DC7266B5F2249F17C7F3C422
-:10D44000FF30DB9B69DD7C7E12EE4037B974DE0B6A
-:10D45000BE15D14F27EE3D6640ED56294F23FE15F0
-:10D460000D9D103CDBEE1D4F785C2AF0CCEE350BA9
-:10D470003A61EC6F585E64A372A013824F5B26E0A2
-:10D48000CDE23BF7DAE639E222FCCE23A0032A07FD
-:10D490007CEFCF1C3EF0BE25F1CDF4EEDCE2D0A156
-:10D4A000F1BD2C2F62A202A08ED7335710C005CF3A
-:10D4B0003C82CB5D7AF79D309F917A0EFF043DA7A9
-:10D4C0002FE0CEAEE02CAAEF3042BEECFE15CC0130
-:10D4D000F5CBE2995DE1F55938D6876E5448F1CC29
-:10D4E000C07665E1BCDFB218E6BE53C8FDC8AF52D6
-:10D4F000314DA67E1DBA48DE3E2C8BDABB74BCBD16
-:10D50000430FE9A814BE5F7A3704D1FE29DB94905B
-:10D5100086743077A6960E52B338DDC8B435CB2664
-:10D52000CE197B2CEEEF652D63E9DC683617D71D2D
-:10D53000447CED0B2179B06CE32DD7E7E2FC9E191A
-:10D5400086120EFBE286FD1391DE96B52CF9D97B8F
-:10D55000781FD96DA6EFFBB29C1FE3FEFA42B1958E
-:10D560001E840FCB161E37C6427BA767DE851721A8
-:10D57000BDC1B5FF0F2817DC70A34AF56F609EAFE1
-:10D580003F44BED0C2C7B9DE75491F0BFD5D9FAFDA
-:10D59000302CEF365B1357C3FCCB04FECE09FA6D7B
-:10D5A00036B3C5CF5A705E0969C9F0FD7A94540745
-:10D5B0009103C76609397186B20DE59E51B3F8FE35
-:10D5C00092F5B11FECF76A8407D4FB5AEC2B99074C
-:10D5D000B852FD8ACD41DD2961981ABC63205D9463
-:10D5E00033F36FB8CEB9C96C36DE9B7A7FAEB22703
-:10D5F00069BEBD65B4EF43D36CB8EF9D8C7989EFFC
-:10D60000B9C712DD77CFE8EDDE04F9EEED63ECCDBE
-:10D61000C4D7F9FD7DB995D1F9DE3D83F335C95FF6
-:10D620004E5ABB42895EC57DBE5C90C6278DB31E37
-:10D630009C04F5CB2DC66E3C0F963FB020CC06F374
-:10D640002C6F83FB3C9C636C8BF63E0FF7EDA8AC14
-:10D65000DC81F7F2C0FB37D20CD251C51685E870D9
-:10D6600054B3DD18477C4CB1E2FA2A2CDE543CFF5F
-:10D670002AEC663B969F6F72DC7F06E4C38B4D738A
-:10D680002865DF02DC619E5721F260DFA7673B93CC
-:10D69000B2008E65AD65749F0CC970127F720ABAB4
-:10D6A0009B0B605690DFE8BBE2701FBE9329BE471C
-:10D6B0005AD32C44CF668670E83658D3705EDD1B93
-:10D6C000CC3A3C37E7DEC9E91AF699490FEDEFD2BB
-:10D6D000B360DCEF3DD81EC62B59AF2FDE0EF9919B
-:10D6E00026A60F8D44BACA24BA6ECF717E8DFCE097
-:10D6F000B35FB23C940BCAB76CA5F948BA60FACED6
-:10D70000C26128E7ED4CCAC2FBB5A4A3F69C997987
-:10D7100008BF7E7AB851213A80F4680AD1C3FC6907
-:10D72000583E77A637750DCCAB48AD650ED433C4E3
-:10D73000327B10CCBF8FF5923CD107F2049E6792EA
-:10D740009F48BE0174E03045FBF0BBAB09A6023C2C
-:10D7500079779389D2A79AAC4C0FF0DDDB144BF9A3
-:10D76000679A6C947A9AD2E9FBB34D76CA1F68CA5D
-:10D77000A3FCA12607E50F37CDA1F4C5A662FA2EBA
-:10D78000F912C085F890E42B921F497A927C299077
-:10D790008E4A01BC0559D49EF89EE477B80E5D967A
-:10D7A0008F1F49FC262BC5AED824E4635D4B905FE8
-:10D7B00014A9E7F73D0FF0EDABB2D8836C0817CE94
-:10D7C000F7FA2C263AE7138DEC30DEFF9B573BBA75
-:10D7D00037F99DAB3757294CEF47B7B7349899DEE7
-:10D7E0008F6E6F6D8CD0E44B1ADF7D3506FAFF47E4
-:10D7F000827335D2DFC93BCE3EF65FF0FD893BBE7A
-:10D80000188DF88679EC7C08C75D17DC3F8F48CC13
-:10D81000B718E89C1915CCEF49A382F93D09FF1010
-:10D820003FCB18DFA74FDCF137DAE7DD8D41361546
-:10D83000E50FC417C0F72F025FCB1A83088E651B54
-:10D840004EEF7B1EF7FB3A23F1BB652D627F6E0620
-:10D85000B8FAC96DA7E218C9678A83B14680DFA903
-:10D860005F1ABD70F6B3538AC9AD4043052E4D25EE
-:10D8700008D7CDBFFB00E56DA5F104C9C74E93C520
-:10D88000ABE2FC5C86F3FEFD298DAF513DD635320F
-:10D89000E26C086D4586700CC97118914F206D239C
-:10D8A000FE96A51F63B8BF59AB621D0DEBAA10DF32
-:10D8B0002B362B247748F83F92A5D2BE7A2F534FB0
-:10D8C0006936EED9E1C4C0E89C92740B7CC3E1C612
-:10D8D000FDD19A69ACF4E3C7CBC4F7F2741DA5F28D
-:10D8E000FB7BB02D914EB2114990DE9D9E6C5C4E3B
-:10D8F000FCCE66447E20EB2F4BCFDA989C83FDCC88
-:10D9000088627EFB7257969EDABD9769E5F331C156
-:10D910003906ED6A87380FA47CF219FE7332CD9F69
-:10D92000EE5FD5CF3CFDCC8BA897F82888F0547DCE
-:10D93000B5D06F64B8272E20B9C66151609DF5023D
-:10D94000FF854FFF35AC0BCA571DE0FA5348BB317A
-:10D95000AD5F5745FAB27AB88F1644227F359CEAFC
-:10D96000F2A3CB579EF928AC8BEE17AE785D2CA6B0
-:10D97000DE780669FD81D3B319F6C77A375A2D03CD
-:10D98000DBAD52BEA57BA65C47D191AFA2697CE519
-:10D990004A34D53FB2217A303DC82AA63FD5BF7F51
-:10D9A00049CFE0D0E8D556B12D975498EFAA7573BA
-:10D9B0003E453A0FACFF41566814D20F9BC42691E6
-:10D9C0001E43CF7488EF35260E873EF7E870F61DAC
-:10D9D000FA9755EDD00844AD3EBD2DDC0EF3ED6158
-:10D9E0006CCE607849C8E6E7F405D8470CEE523DA6
-:10D9F0007B55BA2FF4EC0D25FAAFDF7BFF6B53217B
-:10DA00005FBF43C161591DEB2438D51F5099C9FF31
-:10DA10003C43FDCEB0A1E759F3746803D2D34A8FDB
-:10DA2000E2D809F3E933D9C287FBCDE76F829E6A5A
-:10DA3000823C1309AE62FEBD829FC97A2B3BEE3752
-:10DA400022BEA0DE45925F7E1BC2486FC67AFF8071
-:10DA5000F33CB72DDB8EFABD959EFDF574FEEF0D00
-:10DA6000B18E86757C21F4FCB21F6336DF4FC66C25
-:10DA70002E6F9C13FADC73CFA8C487709EB80FBFBB
-:10DA80004039D76F9E16D1CE22E0F61CEEC75C5F00
-:10DA9000FD959EEEB054A8FFE9E177298DCEE6EB27
-:10DAA0005A69E99C80E7E6A70742E6B8297D74F643
-:10DAB0004B30DE05CF8C28C56F5FA5641B383EB6A2
-:10DAC000A973105ECC3D4CC8F91E5ACFB9BDF10AFE
-:10DAD000DD6F11DE20E79F3BF05C988EF6AD4B8347
-:10DAE000479D89EB6983226C42CE34B5A2BCB11448
-:10DAF000A4BB70E07775072ED1F91BF85DD6A7FDA2
-:10DB00001687F7EF5ED26BC09F0EE9B7CECA715E83
-:10DB1000A466C4E03E28BDDA76D3CDC8C7DE307037
-:10DB20003C8CB43D84F7AAD2B78791DE628DC116D2
-:10DB300083F92FDF848B20CCBB345BECEFD8AE5C59
-:10DB4000D4737627F173BD76335C54603D2300EFC8
-:10DB50002E5872AD5B654EC8ABE23E734D7632AD6A
-:10DB6000EF912A9DC34876166F1AEA3D4F1A994BDA
-:10DB70004579F95933B7072473BDFE2348EF90D692
-:10DB8000467AD386A1FE4BE0B1763E94FBE1B3F634
-:10DB9000496F1ACA2FE78D5CCF87E5564CB378BD25
-:10DBA000664137D80FF6DB9D64BD4872E6C15086EA
-:10DBB000F2BEEEF950AE57F88DF9C920BF737389E4
-:10DBC000A02B90995CB87ED74E3E3F9C17CACF2BB6
-:10DBD0008DAD69285FCA715786B5D278E7C5782BB5
-:10DBE000835BB97DC2C8F591589FC63730B2A3F4A4
-:10DBF000EE092239F58BB8CE4338FE177BC6323C8E
-:10DC0000C7BB93DC9587A91CE437C047F553415E39
-:10DC10009CEFE77B42DD0CEA7F6EE0F2D0E7A1D11A
-:10DC2000240F9D087DB094EC323B8214D4AB7CAEC3
-:10DC300030632C96EFE4768CEAA646B23F54C37666
-:10DC4000675994CE6191583E96F42D9FFF1EF6A918
-:10DC500042DF37E377276B2DBD1DF7DDEE10D2BB1A
-:10DC60007DF1D4FF1A3B98DDA27A8756BF24E940A4
-:10DC700096DF9ECDEF1BB767F37BC11DD9FC9CA936
-:10DC80000BF13C984CEBE4FB15F040F72ED81FD17C
-:10DC9000A8EF3EE979215AB1209CBD698F22DC773B
-:10DCA000F3FBCD177B0D6477A97E3ED4417A9C4D62
-:10DCB0009374785E54AB5C0EAED601F82055EED866
-:10DCC0009D867276F31E7316C203E04DF7C8DE9D83
-:10DCD000AA18878FFBF9AE04AED7F78AFCA1F1A48E
-:10DCE000D79F1BC96E9D4F72CEB60908D7CB3B425A
-:10DCF000744817308E4301F854DFFE0B0ECFF04A04
-:10DD000092CB61FF11BFAC15FCB26ED3D4F0A9B8B1
-:10DD10009FDE5619CA0597F5F618E48781F07A4B0D
-:10DD2000F0959A438F19D16E570BFBC609FBA64697
-:10DD3000D8C76A9E5248AEABD938F521E2837F300E
-:10DD4000B0D1308FF39EFBC3FCF1F1BCE067BEF6AF
-:10DD500076AA5F03F579FB37C2683EBB0C769C4F11
-:10DD6000201E7F70FBA7D41FD4BE9F3E3C70AE4FD9
-:10DD700018B8EECBACF3DF3E427EB2D74CFA2BC0E4
-:10DD80007B22CA1DE70C9E4A5CF7B97D66E233E749
-:10DD900022F87EFF14F8A16B0CCEE3BAFB48BFF16A
-:10DDA000CE0286E7C10AB7B65F396E87E0BF75C39A
-:10DDB000ECE1A827AB033C607F80979F52FBB70D37
-:10DDC000D43E701D8F8A76FDFB735F08D1CBB911ED
-:10DDD0001C1FE79E1943E74A7704A773986F22DE5A
-:10DDE00057CE45F094A1300274502DEEA3E766782B
-:10DDF000E8FE7D4ED94F69B781B7AB6E147663A04C
-:10DE0000BB58A41BA449B48799B674A23C81FAEA12
-:10DE10008959947A832207EA9D913EF11C8ACAE1CE
-:10DE2000FB8BE178D1C2FE41728AC7887CD929E494
-:10DE3000B8DABD03ED7088DFDABD0AD9912E8B7395
-:10DE400010671D25F5E5408F352EC561C6F9B4ACC8
-:10DE50005E4976A486AD3723BDCB75D4E8D91CBC0A
-:10DE60000F752B2ACDA7DB0CFB06E1E03F9E9FDC64
-:10DE7000F577C10FF0CF1A4D722609D7BA1C1BA730
-:10DE80001FC8B6427FB52DCA161A2749DE2BF9FAEC
-:10DE9000249C002C46D497C17D9F970FB17E39CF2B
-:10DEA000C0F5CBF944E770FEDE9D64BB2F1FF1FD8A
-:10DEB000966AC77BFAE56FB3C323BF432EC39B5B50
-:10DEC000BFDE18E69F823405EB3A8BFC0DF733EA90
-:10DED000A5619E69DBB4F690F41DDAFC557BB5F9BB
-:10DEE0008C03DAFC840E6DDEFE8A361F22C6957026
-:10DEF000C27BAF6D0CBFF7628AF75E5B10BFF76243
-:10DF00001EEFBD98E2BD17BFE3BD17F378EFC53C28
-:10DF1000DE7B318FF75E4CF1DE8BDF6F1470AA155C
-:10DF20007A47C403DA65D80B666967A7FDD2B324C4
-:10DF30009AF8A7B493F6ACCCA07CBF5E679E89F438
-:10DF40003AA4BB01B964C1486741CE70B49F766EF4
-:10DF50008C43BCE9BB489FBBEA45AECFADCD325B3D
-:10DF600050CFD0B5E1D38D283EA58D74CECA81F5B2
-:10DF7000F6187A77111DE8BDC437BAD6DBDE9ECE1F
-:10DF8000F147FA0E6689A4FB49199E779143E33164
-:10DF9000D0AEC2B668ED28817695407B4A201D48F8
-:10DFA0003BCA1386DE38E4F7A7F798B6E0FC4F0BC0
-:10DFB0003D195B6C22F94BCAD545AA85E0B4E65EF3
-:10DFC000E5493CA72A7222A97DDF0990B707396F7E
-:10DFD000655A7E259BE4EAFEFC164547761AA78320
-:10DFE000CEA1DBC49C1295DEEE4D4823A13A3AC780
-:10DFF0002F5B74742FB8FC2795E48831ED3ACD7A05
-:10E00000C6BA8335F4356E7764803D7084A6FED53C
-:10E01000879303EC815769ED5437AE3F8AF7EB05E0
-:10E020005BB235F52A8AA706C051CC5BC8A5CDEBFB
-:10E03000DA1391FFDC16DA47F3BFEDA099FC2E2A24
-:10E04000E07C71C0BAAB3003FCB1CAE4B801E1575F
-:10E05000E53144A05EAB5C9C3FAC517B1E57E99917
-:10E06000CB1AE9A3BB2A2B734440FB0B99ADBB74BD
-:10E0700080B70BBA6D0FE6DBD0BEB43DD10A74B5E4
-:10E0800056F1444F86FE4E4738FF03E933D1E0FD99
-:10E090005509F2CBFD296C3DD43BBDE5B93092BBAF
-:10E0A000059D251AACC188EFEDAD2ADD0B503F85EB
-:10E0B000FA20490FDB5B8705A75A7CEBF4E1FF5B95
-:10E0C0005A1FE085FC46FA2CC746DE86729C87AF55
-:10E0D000B76A86E2223959AC678D3857580BEF671B
-:10E0E000ADC89F11F705B9BEF3638F4EB0A15DB304
-:10E0F000E970A28A7C5CB777571CCA1731CE7DB80D
-:10E100007FAAB68FFEAF7C18B7FA3D95A11DF99393
-:10E11000B659619351FEDC67B0CF85FCA6D65F1B74
-:10E12000F15E50AD771BF1DE59B567BB11EDFF3FD6
-:10E13000D9BD9DBE57EE2EA3FBF60AD640F7C8CF39
-:10E140000CFC9C96F0A89AA96CB3C2BC87E772B984
-:10E15000AF2A98FB8314A9F9AF46E17A772B99B8D7
-:10E16000DE1B8BF71BCBE0FBEF047F09DC1F7D6F11
-:10E170002E281A8E7A250FB7830EB51F167AC7D2AE
-:10E180007E58702589D21BAF8CA37BD57BAC783CA5
-:10E19000F1898C80FBEC9B2AD79B75F07D5065F450
-:10E1A000462DC07DF2B281F6491DF0AFBC2CBC27D4
-:10E1B000333605D2E27C5543AFAB0A4334F4BC9806
-:10E1C000456AECCA8BD8084DFEC6B9299AFA37DDE4
-:10E1D000382E80FEB37CE5C447A668FC57EAD6B962
-:10E1E0006C0AE9D1666ABF43BA8EE8EC5A4DFB3A35
-:10E1F00036DF570FEFC13BFE487066ACD388F7ADF2
-:10E200002A1DF7D759ECEC16DFBBE83B2C44B30FC3
-:10E2100047A5D8FF8B9F8B06D2CF4BFDF462FC77CE
-:10E22000CA60E722205A8C1BAE72FD82532B777492
-:10E23000D2FD93713CD4097D4F5D3AD7F7D4B93AFA
-:10E240008D0D1682BF3E1E4052DFAA903E0FEA9B04
-:10E25000E223797E1D7E3F60F0E95918EFEF0A96C0
-:10E260009F50CB70BF0496D7C3BA51CEA8477D0D3F
-:10E27000E999E67C4A7A26398EE85FD2E98A76AD5A
-:10E28000FEA81EF53A7EF85C9A6B237AADDEBDFFE0
-:10E29000B511009F05C51199B88F6A3DF30C65193A
-:10E2A00003E94DF2F9CB553AB27BF7BD799CE8AD65
-:10E2B000AF4A4F74FD7D70A97770BD66201D56C2B0
-:10E2C000BA4C307EE501C5EE56783D84CF08A4CF28
-:10E2D00000F8C40F023709AF7EF80594AFC07FE4A1
-:10E2E000A03F81E2F6260D06970078CA7102E0C5CC
-:10E2F000F2B4F0A874DADE46FE53794265EE1FB040
-:10E30000FE15B84E9C07AC13E731FF0AD79B487B3C
-:10E31000C2A22B7ACAF7D34D31C02B0BF79D769F43
-:10E32000F6D35131DF370BAF4453BB1F8B9EBE8FEB
-:10E330008EE4FC25DFF6EDA33B896F3A7343A3CE51
-:10E3400002AB807FE7125F10FC7568B9D4C5F9A8ED
-:10E35000537BCE8CBA238FFC8EFA2CC92457F49FA2
-:10E3600043566DF99AD0E4182C770ABD9DE4C74E48
-:10E37000514F8E5306E5B66148D723A3511FBBB159
-:10E380002525B1CB4F5E716E3044A3BE3071FD3098
-:10E390004ACBCCD6683C47CAD6ABC5783E9EBA2B92
-:10E3A000263A0FF5F31B0C5173A1EB533FCF496491
-:10E3B000E3315F44E9E9AD418BFDF5DC32BD4B9CB7
-:10E3C0002775777C40E7DA05DD9B618B71DF6D385F
-:10E3D0001886AE37351BDE9D6805916453847373D0
-:10E3E0002ED951B7EFB222DCACDB27A09EBA1DEFCD
-:10E3F0001EC37DF243F586A218D48BD5FEFDF8E34B
-:10E4000078EE3BD71BA251FEFCFC4F702E2A74AE57
-:10E4100091DCF09999D17DE9B39D216EB4DF7FA69F
-:10E420003007DA7756AA47275835E76CC7229CC7CA
-:10E43000EE18673B1FDFBD2B16C7B7BBC83FD3B96C
-:10E440007E74F8607A1499AE6AE772DD2EA9C7155A
-:10E45000FA5E94E7318FF23C1BC3E579CCA33C8F85
-:10E4600029CAF3F8FD90D0E38F6AEECDC4FBA86B08
-:10E47000264B6FA073D7928EF2FA6D4AB01DF9CF7A
-:10E480006D8A3D06F563EC4F11FCBC0DC0AF4CA787
-:10E49000F582CCE547F7D3AF9898BF9FD90C16A16A
-:10E4A000C9CF32C569EA17599334E53F891DAB29B5
-:10E4B000BFC696A9C95F973E5953FF7AFB0C4DFE24
-:10E4C000A779D768EACF73CCD3E417CC59A2A9BFF8
-:10E4D000B0B84C537ED3E2959AF225CED59AFCCDB6
-:10E4E000553FD7D4BFA561BDA6DCC1AC7A3CF73A95
-:10E4F000F09E05707F19EF5990DEF6D6688B3F5E6F
-:10E50000F367E91A06D3D37F2CE8376392E343A479
-:10E510008F041DA743481D28425C10E74A3CF32A9C
-:10E52000FC9EDB19877413582FB03C3FE4D8651B61
-:10E53000E0F0A6892137EB813FE44F3A969D02F93E
-:10E54000270ECDE3F9A9C79E4B86FC6F26DEC7F3E5
-:10E55000571FBB8CE5A39E5F74B31EF84EFE0246A8
-:10E5600022C77387BE5EEA8275E44F4FDE62E77AA8
-:10E570009241FD34FBF52C0007F46F443860EA0546
-:10E58000FAC4F418D027A6AF007D5618187B0DE802
-:10E5900013D31370DFC4EFAFC37D13D337E1BE894C
-:10E5A000E91FE0BE896927DC37317DA76931A57F86
-:10E5B0006A7252BBF79BAA28FDA0A981BE7FD8D45E
-:10E5C00048E95F9A5CF4DD3C51EA2FBCA47F917668
-:10E5D000A67AB4EFA17EEEB0E1BCBF1D56DA09A564
-:10E5E0005DB0B9817585E03EEDD2479C35F9EC7D93
-:10E5F00043F3593D3BEB27876D8D75444D24BDC6D4
-:10E60000482BD97BC4F799CA820434FDCD9DE01C08
-:10E6100081E50BB3CA378403FF98FE6D8301E9E5FA
-:10E620003DE1A71AD8FF855C2E0F1B2639464D8485
-:10E63000B4C0C4FDF00A4CDCCFAE40DFD58CFCA8E2
-:10E64000F92B66433F9AA3A146E24FCD77E9DDA8B7
-:10E65000A754BE64949F16C528DFFC5527F9E5151D
-:10E6600058EDB174DE887CBFFD1CFFFCFC65A43D49
-:10E670005BFAC9147ED9350BE5806916A32D28C035
-:10E68000FE8E76EBA3A1EFCBF9301C4FDAC9777C75
-:10E69000C5BCBA093E7B7881A93309F504D3D69A63
-:10E6A000ECFEFE3FD2EEAD7CD9A9E27922FD7CE4FE
-:10E6B0003872BEA17AE82FCBE7C75360F564A25F3A
-:10E6C00043739D85FA8B81EFC62CAAE750A99D273D
-:10E6D00013F5C0D36A2D76D46F4B7B7B8C5837D41F
-:10E6E000A375167EE9247F8369C2DF00FB31F172D6
-:10E6F00017F6332DCA1BA7C7F53718EDA80F7D4CA9
-:10E7000081F6593EFB3FD60FF1DBBF384FEC37F5B2
-:10E710006B982FCAED0E07C17781BCBFD9445E9CB0
-:10E72000CFCC3493F457AAC81F9BE07422DE8B83AE
-:10E73000AC7F0DA17D9E92807A8E79426EFF0E7A1B
-:10E74000598E74F6DFA71707C7F74846FAB440BAE0
-:10E75000917891781E8A8E24DEFDFCB508CFFDFEEF
-:10E7600057A29F40FA1A8AAE243D159838DE11AFA1
-:10E77000E84723E948F9D2B39DD6516BA2734ED234
-:10E7800051201D0CA4234E97CD3F33517F03E9C880
-:10E79000877F84C7BF4E479D2A9EBBFF2CFDDCDAD6
-:10E7A000CB668743D12FAE765EC8457FA02BB6D708
-:10E7B000305FCE66CC469292E52D439407D297AC5B
-:10E7C000FF34D6CF1D58DFF965AF21DC8F2EA78926
-:10E7D00033F0F521FA7F43F8C5BF6196FE1E0E4B5C
-:10E7E00026D0C12CC1876F2BE2F4352749257BC683
-:10E7F000AC8C1524DF330B978F6DF03FD2B709FB3C
-:10E80000FAB5A2DDEC6F8B5B709CD9515AF9FB5ABB
-:10E810002177CF09B0B75F9BF11392C3AF0D90B3CF
-:10E820007F3F51C8D1492C89DFAFB790FC5B28F6F8
-:10E8300063BCC0778A4D65F900F722E6D4E321F086
-:10E84000CA45A303FBFB097351FE1AE6A6F43AE698
-:10E850002539E07A383030FF53D87A983F1E72431A
-:10E86000C92AE86F56F6AC54FC5E6BEA4D34EAD028
-:10E870003BD0F921EEE77AD5F931CA9917129C639A
-:10E88000F07E7CACD04672D831530AC985B89F0C53
-:10E890007EFACADFC3399A0AE7DC713867317D1521
-:10E8A000CED95438EF7E07E72CE6AF4D5FCFB0DD11
-:10E8B0006C9BD6BF47B6BFCE3A8BE9870D7D8E5D88
-:10E8C00037E18591A8C77A23624C21E2ED8D884912
-:10E8D00085B8DE372262743C0D32523AFEF9D4C15B
-:10E8E000E45649AFBEF166D37881F095F00C84A36D
-:10E8F00084EFBF004FFDA4DC81F0BC806730EA4F9D
-:10E900004DEF86C526A39D51C4D385703E58F7FCB4
-:10E91000F8185C47AD89C3655AE3544A0B1A27338C
-:10E920007D36D9995C08DFCF7109A8700ED0B3315C
-:10E93000FD4CCAFF4CD0567A8C331AE7713ECB9B04
-:10E94000061219FB745B7318FA675E7846B5E3BD6F
-:10E95000A656B56DB1A39EFC0D95C7057D7B3C11F8
-:10E96000ED9B6CC7E0FED2B526093F17C1B5ED6A35
-:10E9700007ED3786D6D9689F5C333288FB199379C7
-:10E98000216B6839676230E7332383387F94F882DC
-:10E9900076FCDC857E26025F8BBF2F98EE3579A34F
-:10E9A0001CE3713DAC9069EE05527FD117A5D2F9F9
-:10E9B00050C0D21EC2FB7BE10903DDDFFB0A192F29
-:10E9C0008FE5F6CABE139755DCEF45A10A1B96E406
-:10E9D0008B9B098AD5319B9F3C6DB605339B1FDD10
-:10E9E00086A4476AF2A1F6119AFAE179C99AF20867
-:10E9F000C7559AF26173B234F9E1C55334F5631621
-:10EA0000CFD4E4E39CD76AEAC757CDD7E4253F8A41
-:10EA1000E79F5842C3524DFB518DCB34F5935CD5E3
-:10EA20009A723538EC498A3B75393AD3A3915FF134
-:10EA3000BF94CD6B34F51E0DE37120732C9573716B
-:10EA40001F8E6EBD5D3B2FF54D85E23A6D9C0FBA72
-:10EA5000E07F88DFA2582D5F9C65D5EA1BE21BF49E
-:10EA60009A7CF524E18F34814D203EF87D78765EE6
-:10EA7000A5C173203C00EF762FD68773D505F9A288
-:10EA8000DF97EBF1DC47BB82FFFCD1AEE0BF5EB4A9
-:10EA90002BF8E7D1AEE05F1FED0AFEE56857F02FD7
-:10EAA000CF3EA1C5736EA716CF933ED0E259D2DFF9
-:10EAB00050F898DCA5A583407C4CFD2C802E041ECC
-:10EAC00016C3FF06C3035D1180FE673530D29B7D00
-:10EAD0001F5E1E9B24CE278117C003C5F5F58D0C44
-:10EAE000253C3C26E65FE01D4771B145A8374BF257
-:10EAF000ADE73171EEFE769873F724D8DFBFB365CA
-:10EB0000C5223F9ACEB85D7376ADCEEE85EE9F0AF4
-:10EB1000C0FF84B1CE7D587FF1B0CB8946A4875E1B
-:10EB2000E718BC4F7E28F424817E9C2E1007280E07
-:10EB3000E17695E26F4EEA5A15E4CBDE04E721E474
-:10EB40001BB76634109DC6B2E2FD9530BFD2FF0CF4
-:10EB5000223B4EE9281EAFCB32BA28CE41F2BBD2BF
-:10EB600078EE47F4F2246117B6737FA2A393B83C02
-:10EB70001B6AB792DF7159068FE3806B5762E978A1
-:10EB800084CF9BE631089F366E37E9C278E1285F73
-:10EB9000BC30CA9B28DF2508F9AAF9CF2613AE633B
-:10EBA0004C3BD39C9363DD268DDFEBB8DD564D7E69
-:10EBB000BC275653FFEAC3364D79A6375D539E7D79
-:10EBC000C2AEC9E776E669EA4FFAC0A1C94FEE9A2C
-:10EBD000A3A93FF5B3624D3E9EF53E8CF01DA5F016
-:10EBE000FBFE3793B8FF14EC55B2E3956E8AE071E3
-:10EBF000A0420F20E569E90FED14F41D28A78F321C
-:10EC00007239B5398EF17B9849DCB798565E770A30
-:10EC10007F6629A73297D69F59FA31F7CBF5426E16
-:10EC200097F2B19F1FB3C3DF8FB954C46F079E7FA4
-:10EC3000863CAE1F099CFF28235F6FF3CF8D1437EE
-:10EC400022E715381F6716A7DB9DA6C1E37786E587
-:10EC5000713DC1F8CCE2903C481F37D8DDA447197C
-:10EC6000309EBDCB85F7CA5F1AED77DABE7FBCD286
-:10EC7000ABF97A4A74BA5BE76590BFD8E267FDC624
-:10EC80004F11E3064D51065D5F6938F7E762E146D3
-:10EC90001BD2EFD0E37178C61A590BC51909BFFF13
-:10ECA0005BB678EE1D034525C65603292F98DB80F9
-:10ECB000F4307726C853998C1DDAFFEC2316906741
-:10ECC0001E6FD4939EE7AAC33125AE545F1CC7289C
-:10ECD000B86F207DA0CC82F7944727737FE5EBF2D5
-:10ECE000F8FA8AD46FFBFDEFC97EC198382718F96E
-:10ECF000C30C426F4487721D3F963FBEA4DB403871
-:10ED0000C9FB2513FE8EA9625E127E723F48F8C9C8
-:10ED10007808DB6A43F193168AAB98837E64127F8E
-:10ED2000BF9DCCF9D12F053CB01EF2A3A1EA15A9D5
-:10ED300019E1A80FEF63B670EB77E87B7FC4380565
-:10ED400082FF50F15543F187017C618878ABA1E8DF
-:10ED500093FEFE89B82B3FFEC0FD7A043EDCA93A43
-:10ED6000B2A36F0AD5EEE3A7047F9827F6139CE3BE
-:10ED7000964C2D9F60A8BF6FDEA00A3EC1CF6F9456
-:10ED80006BF0FBF20D063A4F192B7E10E3883E69BB
-:10ED900033907F6B81C336DBCEEDF324DF90DD0B48
-:10EDA000A656E6D29EDB20473C89F789E9CCBE1106
-:10EDB000ED19E59BB5E52B2CB33F47B96179C0BD93
-:10EDC0007485B8AFAE08B8976ECB13E7B19DD9493B
-:10EDD0001E1376FE2A51A79F8EDC29E142EF42FBEB
-:10EDE0001352F20B9370B1A1BD26DB9707F805A76C
-:10EDF000E339DDA21FD45FAF1F7E43F8239C477F1A
-:10EE0000041BEEF73E8AB7EA3B60E6764A690F12CA
-:10EE1000F5CFBB2E5339D6C7DE2E64764E4079A788
-:10EE2000DF7E146087EAB3E8C2F2B0BFBD06EA4FE6
-:10EE3000FA5B54FFCD3DC1EA674F7676A91AFF967B
-:10EE4000C0D4B9FE20F95F6C8A70BE8A7CFC9CDE5F
-:10EE50006E42FCDD6539168D71F27385DE2670BE5B
-:10EE6000FDF26DBEC2EDB02E1E37DB3747213F00ED
-:10EE7000E0830CF78DF41B98C7BC51984A7B8C73C8
-:10EE8000F36482B3B4C7947927D33C1736AF300408
-:10EE90004395AE87D71505DB7C769AAE04EEF73343
-:10EEA00094BD66C1954CEAEFC62B53A99F337949AF
-:10EEB0005CEE6AB97735D2D155BB9901D7D915E047
-:10EEC000F72ED31B27F3FDB01A633172FDFC89D6F0
-:10EED0002B44E76B1426FD8B884FCBFCE556912F16
-:10EEE000E2F9DB36F07C9781BF33B34BE81B709DB2
-:10EEF00098E27AF05EBC57E823701D98E23AF03B46
-:10EF0000F225CC235FC23CF225CC235FC214F91258
-:10EF10007E5FC68A1333556E572AF4DB3768572A4B
-:10EF2000F4937BD0AEE49F47BB927F7DB42BF997DF
-:10EF3000A35DC9BF1CED4AFE79B42BF9D747BB923C
-:10EF40007F9EE55DE3CB231F73CCD3E417809C5FEA
-:10EF5000E8B76FD1AEE4DF3FDA9534FD39576BDAAD
-:10EF6000DFCC1A35EDD1AEE45FFFD646456377BA04
-:10EF700055BC0750DE3E8CE863EF84E2A4C980DF15
-:10EF80008F43FEFE3303DE37D48E9548B76BEA829B
-:10EF9000ED1CCFAD7338DE758CE3B97709E1799D4F
-:10EFA00091E78BB8FFF160F69B4203B7DF608AF60A
-:10EFB0001B4CD17E8329DA6F0A4773FB0DA668BF0D
-:10EFC000C1EF68BFC114ED3798A2FD0653B4DF60EE
-:10EFD0008AF61B4CD17E83EDD07E8329DA6FF03B1D
-:10EFE000DA6F3045FB0D7E3F897624BF7733504E74
-:10EFF0004FD5DC1F810E35F747AB268F72BA7F7D68
-:10F0000094D3FDCB514EF72F4739DD3F8F72BA7F36
-:10F010007D94D3FDF3CBF36CB4BF505EF76F87F2F2
-:10F02000BA7F7E7CABEB55D41D5DBFEDE22B9876AD
-:10F03000852A8F2BC00A964DDE578276B62EB39264
-:10F0400018019CD2B0FED99242D8B34EE1C73781A5
-:10F05000F5EA10DF646707BC39BD8CFC8EC77F13EF
-:10F0600047E5D2AE4B7F80F7CC038CE4FE43225EB3
-:10F0700053B6B733AB8AA9ACEFCB0F5E2F707C5978
-:10F080008FF8A5DF3CE06298897E2699EB2C59E841
-:10F090002FBF4BA7707FD33BB9BF6F205D3D28E4E6
-:10F0A000A05DBAFDC782D17FA84CB1631C439A9E74
-:10F0B0009D3064219C1AB2503EB8637284F0076E92
-:10F0C0009882FE4772DE520F087C82E2D7F27B996B
-:10F0D000B102C699F625332E47FE6EE47201B6C31F
-:10F0E000FBE23897E278D28FBE374FE6E79BD3B585
-:10F0F0007A4A057C1FB7B7610AC6C5CD0DE6ED7E1D
-:10F10000F34418C1F18616E5498C3FCCDFCB1C18BF
-:10F11000EFBA55F0D3717BADC60A1AD74AF174B273
-:10F12000DFB26D8914FF57C6BA0A31BE82E5280CDA
-:10F13000EDA3126EB0BE57707D69B0550C247FF2FE
-:10F14000B89C60119723E37182228A17E6E5FAE200
-:10F1500072A6E54414A15F1CEB60760C03BE3EA7CB
-:10F160006CC370E8DFE976D8D1AF68DA970DAF529B
-:10F170007E4731E5890C26D23874AE8D7129F4BEF4
-:10F18000C60DAEEDBA281BC6EBAE374463FDBDCC51
-:10F190008EE20E1C3514772AE797C13A756605F1A1
-:10F1A000CE8E0FF3A323E0003722DE33ED067A7F05
-:10F1B000639EDE6A40BE11788E0FF45B0C901302E2
-:10F1C000FC4B9AD77D90A826A37F89CEEE45BE75CD
-:10F1D0003084E40529EF94097FB3CB2DAF0EBF092E
-:10F1E000CACBF673F9C0D9AE10FF93FE267529EE8F
-:10F1F000441DCA0B23B64F8854F9F98F7CF19CEB60
-:10F20000B945B845CB36BC4A7111651B72C3795CF0
-:10F2100014B7435408385508BF2296618D4639F318
-:10F2200014F01DC718F24B0CA7B8C2562ECF49BD1B
-:10F230008E9407E5FB31656F65BF86782F7B4CBCEC
-:10F24000CBB2B98CE2AF02FD7C6A84BCB7B2C540D8
-:10F25000FE432B03E4C11AE12F5413200F9E9C2C74
-:10F26000F440521E14F717E9CF5BF6D6F18524AFB0
-:10F270003418C82E57B29ECB2F6C3F73633C43C9E2
-:10F28000FA593A7C37A4E4A0C3AE0C42276F0B397D
-:10F29000666E9799E03AFF4A3CA58BAEC4517AD38B
-:10F2A00015EE4789B12F48075D2F3092A3DF157205
-:10F2B000CB42F4ABC478445790F09F642437653256
-:10F2C0006B11F28FAB1CCA7114FBE61A9C1BD06F3A
-:10F2D00073EE7646F147D7A37C03FD2F467907F5F9
-:10F2E000EE39494514873147A17896EB73560BFAEE
-:10F2F000067A6748EF2E41BFC594EF3F17049D3B48
-:10F300005DDD7A84FBF52EC588EFF039C53D56D218
-:10F310007120BD978608FD9385EB97FAF54F385914
-:10F320007AD4C6740BFAB796A26E7004E388079875
-:10F330008766F0F2D829A65B5AF052F3DFD44B94DB
-:10F34000E8743CDE09E42DE4ABB7ACCD342EF3E336
-:10F350002F9F4C9D39696AAE0FEFCB02E2F4D6DCE9
-:10F36000353AE6BBE245CB01CEB84F4AC3BB7E0679
-:10F3700014CAF2A6304721889E4B985C27F3A25FFF
-:10F38000E052915F3E25F3AF9B33083E94CF793135
-:10F39000FA1617F155CEB76E46BEA522BF72664D5E
-:10F3A000217ED5351BF11192D12BDE21E0F10E81AA
-:10F3B0007A88E553381E02F511E5199C9F33BD2D5F
-:10F3C000F1668A0BB6913E4FCEFF94411BA729D31D
-:10F3D0005BA670BEFC63C537FCAF14E70DB8BE0773
-:10F3E000753C6E7E84DACA845E88F6BFE41F4CBC2E
-:10F3F00023E1C33FC869644757ACFEF8776E56787F
-:10F400009CFA10FA1B96DEFBF04ED4DF351919C6B4
-:10F41000B93E91C6E9E889DB8D248797183B5FC523
-:10F4200077B2241C3F6AFC0F03E9FF997734BEFFD3
-:10F43000B5B4C16C47FEFCC9D4E28A29C3111F765A
-:10F44000C2C724D866D8FFC984E215F8BD6ECBD1F7
-:10F45000C7316E7F554712C591961DCEDC88EF8966
-:10F460007C32D5598BEB2DB3588D788ED7B744D0DD
-:10F47000B9561A23E23A592FD9A924FC5BA6F0F316
-:10F48000744A3EEFBF47DC479061CED3D4137EDC95
-:10F4900001FB44EA0503F50B81EF380CB57FA41E90
-:10F4A00001F506463FBDA2D44B18D24F2DC173B40F
-:10F4B000C4A88D3F94E941A97713F7C1E5FDE7584A
-:10F4C000C6EC18949BB72A563CC72A2CB69B2643F9
-:10F4D000BEE284013D30D9DC481B7FBFE32EFE7EB7
-:10F4E000C732D8AFC86F4A843F5645FB64DA6F1500
-:10F4F0006E48B387DE97376F3D9EF002D28FD741BB
-:10F5000071F915568731D26FDF97B72A9AB87E996D
-:10F51000DF3945A5799780988EF0BB656D9211DF34
-:10F52000D02901F102FDFB0E4EB169E2AAA11EF93C
-:10F5300035CC4D66AFF1F79360DE497CBC2CBFFE45
-:10F5400097B56ADF2780FA2417FD764A28E1AFCC09
-:10F550000AEB4EC2D44AF30438109C7AEF85FE6C55
-:10F56000340EE1A3DCEB36E0BDBB04FD2920BFD4A3
-:10F57000EA36E038CB5AF87B21CE2D7C1CE7E60832
-:10F58000E378949BF4566302C20F2FCB51343FE2D1
-:10F59000831500178CB792719781F02913F3AD682A
-:10F5A0008DD0CA63AD5B0D888F2543BC57D02DE845
-:10F5B0007659CB0C8A37AFD03B289EC129E0FBC9D6
-:10F5C0006AF3DD681758D2F6902109F27F14F4DB54
-:10F5D0002DF6DDDC64EF687A1768B5D98EF35C62CE
-:10F5E0006DA5F5F5C3F701808782EFCF14137C81F9
-:10F5F0002E5CE89F57D1A6C5A76F3E1CBE156D6552
-:10F60000B4DF2AF54EA3D57F1EED4747A31FCA12CC
-:10F61000D8DFF8DE11B33A29BEE9EC033725D23A38
-:10F62000619EE40765B7CDC6777E804E888E25BD86
-:10F63000C8B86C39DE3753785CE637DFBB2F1D2442
-:10F64000D734037E51DF3DD4BE346260178C6BAC7F
-:10F65000E0EFAF05EE53B93FFBED07629FCAFDFB3C
-:10F66000B8A1D81BABF8F80C9CB70DCF0E02A74978
-:10F6700053F97C970ABC025C5FF18FE3B24DE578E9
-:10F680002D49D6EE77EC0FFB0D93E533BDA331EE9C
-:10F6900052D697E39644F27648F7486F61623CACE5
-:10F6A000BF86EA6BE351CAFBF9C5DE0DD1C82FF660
-:10F6B0002B24F7AEB9F778C2BFA33CBB8FCBB3E71F
-:10F6C0006A77D6C7A1DCA87727FABF8B55E1E5FC9E
-:10F6D0006139C83FC82F2AC539BD2FCB9930D5CF46
-:10F6E0007FA2E2FE7D694ECE5FBCC85FFEB2EFA591
-:10F6F000F7A6D87CE7A79CFFB2CD7F349459FCE1F4
-:10F70000C5D777777A1FC5D9955B8C36F45F2E6F96
-:10F7100029237ECB62E15EA1F8F01D4807652D0A22
-:10F72000BD2F56DE38D1ADFE5FE4CBE55BE6D19B65
-:10F7300048124FF2BD13799ECAF93BC4FC970A3AAE
-:10F740009E3595EFBFA55549C64ADAF749C672A45A
-:10F750007F51BEA442FBBD1F4FFD76EC8C8DB83FA0
-:10F76000306E88EE275B0C5CCFB73794E4D5736BB3
-:10F770009EFFC322A8F7C583DB13513E91F35821A6
-:10F78000F479CB855EAE52C8AD80A7F953FDF8EC95
-:10F790008A27389ECA9F79EBAFF82E5749B2E067A7
-:10F7A000F7F278FE659EFD84B7259BB71A92105F2D
-:10F7B000F848AD5FFBF206B8E8023C976EDE6E409B
-:10F7C0003EB04CAE3780DE4B84BFAF842B9E3B8A6D
-:10F7D0009FDD42D647FEB71FC659BBDA1C86FA69C1
-:10F7E00039CE3D53B9DC54DE101189E3953794FDD1
-:10F7F0000AEF1D92DF07EEBBD366BE1F96417FB8AE
-:10F800002F4FCFB0535C33DAB5063B57EF9CCACFCE
-:10F81000D5470DFCFDC6F810CF1E8443FCAA603B03
-:10F82000F287D4D42EB21B233DE3BC8D3AFEDE63B7
-:10F830006A6DD7259C0788D4E49F8229BE33852230
-:10F840007634E49FD4F1F8AB6495A7BB057CA0DCCB
-:10F850008BE52CAA8BDE9DEB7F3729805E8D6CC7F4
-:10F86000667CEFC618C5ECCD361F7DCA7E247D4A66
-:10F87000FA1D6A7DEE1FB8BED349421F916E4FC478
-:10F880003895D2FBC6D8513FF37DEB348AF707FB9E
-:10F89000D70BC49A1739C87A53F9BD65E8F5B61580
-:10F8A000450FB2DEC075CA7D227DDAFBED0BADDC03
-:10F8B000BE705A81F30BDA9D5E6D26FF2FB92EA91B
-:10F8C000FFFEA17108AF4C8D147A9DAE5094234B6E
-:10F8D00082C5FEF7F23C7E9FE7F75D9EFBF2BD36E8
-:10F8E000C99FCF3488739175DD8BFB9935A6D0FB0A
-:10F8F00024275B4F87E27B29A767F0F9C9766B0D58
-:10F900003CCE98851A6DF8FE21DCAF4E36A2DDA7FD
-:10F910002586EE91B734A6105FB8C515C1F50F4224
-:10F92000BEAF147C30646DD9467CE77B797B925501
-:10F930008171965BEC67DBA9FD383BCA83216DF3CF
-:10F940008CC924F7F27B80B413AD555831C58D2195
-:10F950009FC4FDA53B9A8AE7CE8A767E0F98AB635B
-:10F960009BD14E38AAB978761CF28987158A3367FD
-:10F97000DBB4EF58A567177F4CF7BF8077E0D61A46
-:10F980003C8E18E4E3206FA0BE69B9A598E4F65256
-:10F99000412727DBBAE93D7A09D701F13F461E0727
-:10F9A000DC1BAA233DDC0F8D03AA1076254937D234
-:10F9B0002EF508FE6732C249A573AD482DA1F79414
-:10F9C00036B6CDA2B4626BD183AEF1187F5C1C3D1C
-:10F9D00085E66D203D5945DD2C1EAFFB645004DEED
-:10F9E0006F120DAE447FB9B462FB268AFFF96CBB7F
-:10F9F00099E27F0AADF30A23A2E8BD638AAF93F5CB
-:10FA0000C2F3F979515D374B13BFB31CFAC4773693
-:10FA1000BFF284901F9A8CCBA98D7106E7E7F2F8AC
-:10FA20009CC9361E971347F56D83EAC5657AB6897A
-:10FA3000C779F8C51BDDB004DAD7D63D1786FDD4EB
-:10FA40003CF0EE44AB8EF450D1F9C3FDE28DDA798F
-:10FA5000BC518CB82FCD8D2C5EB404E1FF7B95E0BA
-:10FA60003FD4785587158D1DEF167738C9AD4E2FC9
-:10FA700033A21DD9696524177FA6B2469403A4FC5E
-:10FA800022BF5F95CFF9D567E1AD89481F2B773D40
-:10FA90009488E7CBE7A13C5FB2EBA6D7915F3977BB
-:10FAA0000471F95CCF481E2E7771F99A5545CAF753
-:10FAB00048CDA5404739F921FCDDA3766DBCB97C62
-:10FAC000E7F6733D7F9F07E38D90DE3FD27B972360
-:10FAD0007E3F02F915EFB1E1F99C3E3F6A5567930D
-:10FAE000DF106C1494433E6A7D2E14E3A1A5BC562E
-:10FAF000A4FEC581EFFFAC39C8E382F17D7A7A2B91
-:10FB000054E841EA851E64CD0B86D9F151247FD19A
-:10FB1000975ABDD73818FEAA857CD59F3FB09FEE77
-:10FB20006DB57BB9FC50EBE926F941CA2332EEB042
-:10FB3000666F37C913B25DFD010E97BA03FC7B599E
-:10FB4000BA4EEA511C4A2ADEA715CAAF9E9251BA94
-:10FB50005E931F57BA5E8FA9D0DBEB7B491EBC3B7F
-:10FB6000FD1DBA87D7B5887E216FF01B6F0912D1B2
-:10FB700070FE3DC582ED6D1AFFDABA0311D4DE5B6B
-:10FB800017BC19CF7947BD458F69739D85CEFD6D33
-:10FB90000DBA74F4537728C17694E33A84FFD6F013
-:10FBA0009AF7CDA83F8863BDC7F1BD5D6F82B316DC
-:10FBB000F7430CBEEEA2FAE2897A8E7C9A8DFD178D
-:10FBC0008CEABA8C6F6A18D64F2A453BC5DA7CB1ED
-:10FBD0008E8CAE6CA4EBE1C7387F7ECCC036D3BB35
-:10FBE000CDFA6286FA7BAFB02FBABED1D1FBB31D7E
-:10FBF0008AF7D7FEF2D51EB16F8B83B89DF1FE094F
-:10FC0000CE5FE23C7EAA18C667927FA33A1AFBEF4A
-:10FC100011764829A7CE14FC3941DCAF8C23622D24
-:10FC200048C7D2AF4F713828DEF3CE8C63E5783EFB
-:10FC3000DFD36BA2788199BDC124B7268C9843E7A6
-:10FC4000997CB75DB1E95909D43F96A1F3625CDCB8
-:10FC50003DCCC4FD024C01F2ADCE4CFEC94AC7EF0B
-:10FC6000BE41BE1EAF5E3A1E8EFEB2FFAED0FBA3FB
-:10FC7000A57D671F7B9BE17DD89D49F1D009CE878B
-:10FC8000108527FBE6743B0175F7583D263B3F2F57
-:10FC900098FF3A3A7EFE4D58A4CE37BF9EDEB3F4AD
-:10FCA000AE634FAF89F4B6333BC43B8701F3E989B8
-:10FCB000B5919F34D42379B3C7A2A3F7DD66761C30
-:10FCC000A7F70A67CAF70C4DDAF70C992D2102F550
-:10FCD000CAA44B05E120BA99E3AF205C7B5FECC876
-:10FCE000E7F26287E02381EFDDCBB81579AEBC6C1B
-:10FCF000D9750BD74BF17DBA4ADAF9AF24933CD1D1
-:10FD0000D791F29DEF58BC8B7205C80BA7AE76BC9D
-:10FD1000923FDC77AE2E147092E7B38C5B5828E0EC
-:10FD2000B5D0A2E3F009F8DD1549378174E1C33B92
-:10FD30008FF792F864B777BE8AF15880C7F1F73130
-:10FD4000C2DFDB488F27BF7973033EBB3042757437
-:10FD50003B937E14FCD1FBDD3F187F9D81F8F39A25
-:10FD6000C7A01CF1808EE408E9EFE814EFB54BBFA3
-:10FD70004796CE881F94AAC1A42F748A77DA810F80
-:10FD8000BC8A7C40EEFF5173BAC6E3397A12AEE802
-:10FD900038BF2E9D87BE874FE3FE862359679CF0B0
-:10FDA000CFC945F94DF5BD4F4D74DFACB81FAE441A
-:10FDB000FFCB8516F273EF7107BC4F2DDE31EF617B
-:10FDC000823F2C96EF98C37E86766D4B7879FF3B09
-:10FDD000E6A319DDA3DA32591ACA5F6DE2777F868E
-:10FDE0007CC77C6524E94D1F79C43D16CF03F97E9D
-:10FDF000F5F404A779DAF081EF573FA8142FC1DF9B
-:10FE000081718DE7F3ED5A12FCCC2E0E6E2FEA7B3A
-:10FE10004E3686D2BBDD924EA59E7B94ABFB6184B1
-:10FE2000938CABFD58D09B84BF8C2B8C0AC083A4D1
-:10FE3000BBFEDF8B59C7E9AFDF9FB69E913E6524BD
-:10FE40004C2584FC23ED3684EB3D89CE249C7FF346
-:10FE50006A8033E9D1B99FE749F17B1681FB2963B9
-:10FE60009A4EDA89295EA0549C6BA5323EA0511BA4
-:10FE70001F10F8BE69F0C8E209D3609D1794772778
-:10FE8000E2C737FFB73AA8DFC9A4699C8FA7C63A73
-:10FE9000274EA3F36DA6468E7C33F3D304FA7D99E7
-:10FEA0006F8F8FC473EFA684E2C9D8AF3995DB0D8D
-:10FEB0003E8EEBA2F88E8F97FC2D81F4CEEBF8BB33
-:10FEC000AC3F749E03E399391DDCB69CFB23C6B39B
-:10FED00006A2DF585F9CAC19E7F13F2D9ED9176F42
-:10FEE000BC9B7E57E4E5264FCA99D103F1911F745C
-:10FEF000EC391BDC681A8E1C2AA5F8DEF063B725E6
-:10FF000041BEF1C84B3C1F7FEC7212E0E6F6231DA8
-:10FF10003C3FEED8658C075E77E44829C5FFA2DD3B
-:10FF2000600463771C79B9D405F8A89EE06C427C24
-:10FF30002DBAD2F02A1EC3EFAD9FBF3C89E259E72C
-:10FF400025A4F378D6B558BE307AD98670C517CFB8
-:10FF5000BA6D1AB4037AE8B9C4E9BFE712A7F7206B
-:10FF6000E403C3FFF554C6F54AFE3B149F94FBEF30
-:10FF7000C78A4B96FB98EDB26F362031BAFEE57812
-:10FF8000E14768DF04C40BF7187A1F277BD2256688
-:10FF9000C338C4A3A1EFDBF09C68CEE5F18C4A6FB7
-:10FFA000A70DFD30F27378BEF952A70DF93BE6516B
-:10FFB000AFD513C1E31C653C6CF3256F1CEE937C3D
-:10FFC0008C5B84FA85BDBDA5C86FF2D18F3709FB64
-:10FFD0007FEDB8188F617F3B2EF178C31E73A7CDDC
-:10FFE0002AC6C17E60DC24E48BF96B4DE46FD47CBF
-:10FFF000A96135F55362E91F570918D7F4DDE3CE3F
-:020000023000CC
-:1000000052FCC64DEDE3719D38AE4D33AE97E281A3
-:10001000A13F8A3BED89B0C7E27D5FE60BB11CF2E0
-:100020000F89DFA7C8B77955E4FF323E2AC628DE1C
-:10003000E116F715A847F1983BFAF83A2F3679AB55
-:10004000713F150A7E5D68E4E725D305DBD10FBB60
-:1000500048FDF6B578BC97BCC0EF258541C5DB707F
-:100060003FD6EB39BF6151F277D23A57FE06EABD6F
-:10007000131D4FBF2B3632F6104BC57BF1AA391931
-:10008000785E80BCFD11E2FB1DD6AAF0DFDFE2ED59
-:1000900017CC0921FF939E23637271FFCC0FB21D11
-:1000A00064B06F4F4DBB44FB747EB82D176F3AA7F9
-:1000B0008E5CE6F918DB41B4EB9AD8A5D242BAA718
-:1000C000713BED4D3E3BEDA7B82FEBE65C3072B9CE
-:1000D000AC97DE673E378D9F5F20B793DCD17B8D79
-:1000E000786F33C3968BE58986DE30845BCFB77A31
-:1000F000FE5E2DEB0DBBD1CF2EFB78077FC7369070
-:10010000AEF715F0736055AA85DE39AB8F359928A7
-:10011000EDB8349B7E07465F9C8AF7028771707D3D
-:10012000E313055CDE4CDA68F4D9DDE1FC700433DE
-:100130009977B13CC6B6FF5B70FFBD0B8F18E368C3
-:10014000710F73599F284CD5D47760FDFE72C69FFE
-:100150006793ED47BEAC7F02EDF8341EE2B992FB27
-:100160004D049E17A5D32335FE568F4599C9DF2A26
-:1001700055157A3CA86B257D20B7DBC6FFA799E211
-:10018000E77698391DA6EA78BA4327E27C859E4F28
-:10019000DE5F7E31DD397E7A2EF5E3A57ED4FD99D2
-:1001A000284FC4310F8D2FE532590FE42F33311909
-:1001B000F13B6FF9AA6E5078BE5230C351908B74E8
-:1001C000ED629FF89D131743C21AFDF157AF6AF510
-:1001D0009DAF14CCA476B27D5DE32CF609C5217ADF
-:1001E000897EEA5275745FAD57D92BF47B03AC93CB
-:1001F000EC98B2DDFBC0273FA1F71A1C947E00FCEF
-:10020000F213F2F35B4CE95F9A9CF4FD645315A57D
-:100210005D4D0DF4FD545323A58B6E0ECD41FA5F59
-:1002200075783DFBC4EF7CACF3189CFE7E35EFCFB8
-:10023000189C8E2A051DBD9F3478795301978BDE5B
-:100240002FE0F8EC59CEE54BA0CB166BE4D0F24290
-:100250004F28F747786926A7F39E389E7716F077E0
-:10026000421D3AD68EED5F9AC9DF617F3F5947EF55
-:1002700039382279BFEFA7E9484EBB76F68C528415
-:1002800093231ABE67F9F2EF5FC5CB1D23F87739C8
-:100290005F593E7E7ABFFE208DDF8BB9DD1DE89D64
-:1002A000FAEFC76F219F5F607DE9471F088FA36248
-:1002B000DFD2BE40B91DF74192DFBEA8B7D1BE90D4
-:1002C0007428E9AF743A87736A90A07338BB087ECC
-:1002D0007886E1BD38C64C72AC03ED16B09E1D2287
-:1002E000CE7DC07E107600B91FE43E90F41E0FFB59
-:1002F0008CDB39F83AA6A983EBE73715F07B6A6700
-:1003000074E8CF08AF1D062B9E37D3546E6FE8E913
-:10031000589883FEE0459B2C0D83F1AF9745FB7FFA
-:10032000190E921F0C018701EB370A7DFD3FB97E44
-:10033000E26FC8B797737FCC407ADD5B20F915A7D1
-:10034000DB570A1CBB907E7A14B31EEF273DE6C133
-:10035000FDC75F9AC9F785A49FD2E94CBC3F03EB68
-:100360004C19C8EFE47AFAD7B98211DF4B1571C680
-:1003700081F895EBF2E37B1D057E7A27C6405E810E
-:100380007E46D65AE87E2AE9F7E2F06F2AF1FC9A17
-:100390005360E3F6179D2ADE81E5E749FF7745A51F
-:1003A000782BBF7386A1DCD27B84DBE1BC704F422B
-:1003B0003B16EA9EFDE3ADBF16FCA26F71AE0EF5D3
-:1003C0000317BFB6B8F0DCBA38A2F724CA2517DB8A
-:1003D000F93BE7D0E35C05FD4530EEC786BFD7C2E9
-:1003E000ED1FEAC35F9D4479A8F26195E4978B788D
-:1003F0005D8676AB1EE0BF6F27FD066B45BBE6F65C
-:10040000CB8BE877CD803E51FEF9C45C9F8C72F1B6
-:10041000AC871F3881EFAE571E5450CDCC8EA3BE93
-:100420001DF26777ABFCF75545BCC96CE1D75FBDE2
-:1004300093FBF5D7629C09CA2F07B63F88BF3B598B
-:10044000B7DBC0CCF07D36BE8F06E3ACF084C205CE
-:1004500012FA6DD3C6A5FE84B936A21EB96A9BF600
-:100460007BF50E6DBE36C05FF15281F04B1CCB3276
-:10047000C92FB18DEB8925DF1E28EFBA387F5C23A9
-:10048000FD74BFA477BDD5235F259EB2F0FC3C91DF
-:10049000EF86FC85AF38FC25DCEA05CFBF10C772BC
-:1004A0003CB0BEFA23662BDEFFEB5FE0FA818B9E49
-:1004B0007082F3AAE02EB227B017552BCA61771DC0
-:1004C00056499F50D761FE35FE1E6DFD4185DEA960
-:1004D000AD3B1CE4E6F0B95489E52B0E9BAD362C00
-:1004E0007F3188A1DEF922E00DFD612F267411FE17
-:1004F00011AFA88F80BFB9F8BB1512FFEAC3DC8E1D
-:100500005CB947E0A7FD363DE1D5ADB098A4817850
-:100510009278FE9DEEE97E3C61BB590FBFF79AC011
-:100520003BC3389BE3EDE5F47B1812DFC6239F2421
-:10053000A2DC2BF1AC029E7F21DBDBC43B78DF81A8
-:10054000E72AC4B3E59FC7F3EB054CC6FB9D7D14BA
-:10055000E5DE5023D9CFA53E43EA2F86D7BCFF6AFC
-:10056000140C3C3AF63992734B23CFD5AD66A43FB9
-:100570009B341DF59FD7BC853FE7CBDEB9F6E94C30
-:10058000A48F664317FD5E8C2B82BF27DF93346FE9
-:10059000DBF3305E61E43789FB71DFBC1C4466939A
-:1005A0005982AFE29FC9FF3DC00E33E9D9EA3A82D2
-:1005B000B85EED80D66ED613C77F9FAFC8D85BBA42
-:1005C0001AE572E80FC791F7C19A0EF1BB2FE2FE50
-:1005D0005623F50C7B03DE85B2BE45F54AA627D32C
-:1005E0003C5262A6D9900F352F61CEE094EFE2F72E
-:1005F0005C7F237F276F48397008BE2FE53FE6D226
-:10060000EA3924FF59217E57B27F7F887CD57A57FB
-:10061000984925BAA378F1DAC7F8EF2A7E8A7417C9
-:10062000E6A3A77A1197F6EABFBDAEC7DF67EAD99E
-:10063000C1FD2280433E88FEF9E73D3C0EAE3AA75D
-:100640007BA2D786BFCFC1F9D0CABD8ADB9634085A
-:100650001D31F746FE9E7D003DEDFDEEF70E6F9FCE
-:100660002EE2DDC6B2F1FF00786EC7F8A35C1FBFB3
-:10067000088C9BEC3FBF027EBFE37F5A1C775F066E
-:10068000ACE73BEC8C3F89D5BEDF728D4DFBFB4C5C
-:10069000D7A56B7F9FA9CF22E023E44129A7EE9E37
-:1006A000CEE599C054C2F77ABB761C792FFE699EBD
-:1006B00076BC790EED783F142F3F563CEBF7C1EF37
-:1006C0003531EE0931EEEB62DC7F154E321D6ABC2E
-:1006D000FF9FFEBF49FF0F426139640080000000A8
-:1006E0001F8B080000000000000BB55B0B7C94D54D
-:1006F00095BFDF7CF3CC7308210904C22424216058
-:10070000880324542B96C9D300D6065C2D68840137
-:1007100052C83B80B5D2167F190411105BA8D1A234
-:10072000224E82E1A1619D08C144431D14B288D6C6
-:100730008D748BFDFD56DCF828F23213A374E55757
-:100740002D7BFEE77E1F990CA1DAEE6EF2D3937338
-:100750005FDFB9E77DCFBDD414E718BE9A22446E9F
-:10076000CC59734F8410AE953D4589D942F4BDA94B
-:100770008A268710C2ED3D561F2B446DC770B129E4
-:1007800099F092BEB70CC0DBC6D93751FFC6F63F11
-:10079000BC83FEDE03AAC342FDAFB77F1C85752E66
-:1007A0007C152EC470CCFB384A105E7D49617C13E9
-:1007B000F53B089FD9AA0A7F26AD67F499D17F211E
-:1007C00055C7BD6641B0A4A5D5DC43B06A4F2BF731
-:1007D000BFE9330DEEDFD338A8DF8EF104AB8CDE3A
-:1007E000283BC173EDFA7A7E1E5F9DAAB8BC68DF14
-:1007F000F387B8A518D7F26EDC128297F133E36A5B
-:10080000F8D9C11732DD34AFA683D6891858A7A608
-:10081000C3A4E192EEEAD4D6A218E2976851441A32
-:10082000810B628B5845FCAC6A6FAE16D45E957135
-:10083000B749105F023EB518DFA71F8388A37976FA
-:10084000FA8BF877C1F745D4125AF735DFD1DB5C64
-:1008500004039D6F44E1BB8103343E73809EE92E07
-:10086000E25F0EA059881134EFC01B510EEADFE899
-:100870007B43F2DBE8E77DBFAEE10182CCE7769512
-:10088000F75DF195CAFCD7D7BBC5A5F23A33DBD3E8
-:1008900022B1AF133EF9BD392E876C4F5D5406FA75
-:1008A0008F27CCCF5193996E17F0C0C4D9CD9B88B8
-:1008B000942A1FAD9B7935DF9668EB7699C43C1F6F
-:1008C000E496BABF6B14E9C7F1E2E193A9E7CAB8AD
-:1008D000BB5D061E576476A72EA77127221C917652
-:1008E0005AEFC1E2719190EBEB80682FDE697613CD
-:1008F000AC3C20BF77C2DE1D057D3B7160AAEA518A
-:1009000006D6BB43FBAE101E860372F3B09CCABD75
-:100910008D115867407EB27D8ECBCEE38F7BDFBDDD
-:10092000F36EDADF898C7027E4D26516E53ED613C4
-:10093000FA08BED799D8083EE8DF9B0379D0BC40BF
-:100940008681E5DADB6ED2C6DDDD2C068D33B1DCC7
-:100950002E3C37981EBBF7C35FDD4DE3AB9F51853F
-:10096000859AAB4DCBE3B0FF4FB70FA6AF5CE373F7
-:10097000B5C91F1717A4AFD51D57EC2582F5BB438A
-:10098000B70F07CB5397E3890C55D29560F10A2234
-:10099000B9BAB599F59ACCCD639BC250D8092686D1
-:1009A00077272BB4FFC4FBADCEB544FF738AD66F57
-:1009B000201843B841E266825682CF98643BCC1639
-:1009C000F3C7903815C24DC5E3720C29B48EDA3ADC
-:1009D00019727D7186EB5117EDFF97334A26CD20B2
-:1009E0007842F42D15F4CD9A8B111E112D44A1FAE5
-:1009F000FE13F86EFF019380FFA8B176547E427A11
-:100A0000DAEF244321BAFBB79BBC1ED63F57843292
-:100A10004D88A53748BBF9D4E19EA68EA3F16B0C97
-:100A2000BCBFEA16D56BA371BDF5C40262F967AD10
-:100A3000C93F82BE561F53ED56DA77BE2FF9D7D382
-:100A400081B7989C169A5FEBA346C26BF7285E8726
-:100A50005C5FC02E6B6E605D17A76DB529228BE0C1
-:100A60009A3E33C69D3EA488C768DC2361514DA0E1
-:100A7000BB2673D659258AA0BA797D22ADB76C9B67
-:100A8000E9A31EAB9C7B99FEABEBDCCA7A5BE11D54
-:100A9000DC5EB567305E238C0338ADDF8C3F6E14AF
-:100AA000A2CD15197BFA3AFA7B82987059059FA658
-:100AB000C7C31E8E43AEC447D140CC1E29C4BD93CC
-:100AC0009CF1B0FB8D46C72CF021D069B2835F75D5
-:100AD00087F657806E6F7598D3405BAD5DF52AF34E
-:100AE00035F025F1FD7A820982F71F1092BF8176D9
-:100AF000A9E77526C56BC57CE221AF6755BC6BA81D
-:100B00002BE0E98F62FF244431EC62E5FC1C03FC1E
-:100B10001CCC581029BFD6ED41B11995684069FF2A
-:100B20003F30F6A8C382FCC47FB95298FE02B3706E
-:100B3000FBA8FDDE486734F47EAC352A0B748DB516
-:100B40002679C1F7B1C6BE35F8FE23A314C783B416
-:100B5000F4E1AC57262BC06B239CD0132561911177
-:100B6000FC7864D42223F47DACDD97519239801750
-:100B7000A01FF620BCFCBDA208B711DF796EA4E26D
-:100B800037D0FA011BD1073B31DA4DA02F6092B864
-:100B9000106B06D1471E89F1FF77FAEC445FC40061
-:100BA0007D24EF68CCFF229BF84330698E10DDEC8A
-:100BB0001796B35FD0F97981F4BD806495A648BDDE
-:100BC000A9DE7EB808FD35A27B3DE61545C97D143A
-:100BD000613FC0C3245473A5BC7235785FAE8C2FBF
-:100BE000BAFFECC8751973096ECB2D310316AA999B
-:100BF000F13D43F8FB958A95F5E40BB23FF8E37BB2
-:100C0000962BF6D48C01FDD6EDAA4E365DB19FAA87
-:100C1000DFEF348B147CCED59D41FDE542DAF5C281
-:100C200055367B6AB01DC1CE881FE5F68A5B05D9B3
-:100C30009B7B559C3D752AB5AB17CC02BAA7D957FB
-:100C40002CFD5E4E19C2BE7C2176D93E18F7DBA47E
-:100C50009EFB2315EF5AA23F3577B0DD256976D08C
-:100C6000E856787F8D5F1B19F7942A5EF0FC0E6AB8
-:100C70005C15A36D0EE3CA73BD888F77105A8AF690
-:100C80008658B653EE24FFF52FDA3EEF30FA0FC345
-:100C90007F1C35F992EDD475B4C6EAC4FAF3052584
-:100CA0003AE4D74A4537C393E1B56D7E5EDC33063F
-:100CB000FAF59EDBE2441ED6B8AE29127E3C4BAC60
-:100CC000B39FCE405221F65C9E7AED7C8614479C01
-:100CD000D6E582404C790AE4ADCB755BAE2B2F375D
-:100CE000E7DAF3ABFED876DBF7E0BFEE6B36C74B47
-:100CF00035E9CE983620375DAE75C2C374EBF2BAD3
-:100D0000223FA27D34F8A15E98C37EE65955705EFD
-:100D1000A1C9CF4ABF43C94FE7EF0C4D0ECB3AA450
-:100D20003F0A95ABCEEF1FD382F83EC5D1ED2C0F15
-:100D30006161FF172AF76F930B6598A5E8CA8FB515
-:100D400008C833D120FD63E252D213A2FB6EE13E0C
-:100D5000D443F0CEF0B74DAC879A7CEE817C68E846
-:100D60007BC2FBC38CE4FF3BF974E496DC1F6C8709
-:100D7000A176772D3BAB7638FF5D8F7BE469C8BEEB
-:100D800042EC33C4FE7479B95745B19D5D91A3DA45
-:100D900022ED55935704FD0E696FF883BE57D3AE0D
-:100DA00078FDC9DFC1FE14229CE4F65888DDE9F223
-:100DB000B996DFD1FDD429E13F6AA7FD9F4C917917
-:100DC00080E767166F33F0744339FCDEC98912EE91
-:100DD000D7FC5B283C45798E42716C53C6891188DB
-:100DE000D727CDFA3A366F33D17F6A4DF79815344D
-:100DF000FF54AE8427911706E1AE30B1107EFDD4CA
-:100E0000488B077C3AA54CC8437C38A5DC7F9BC443
-:100E1000E3CD0EE0F3E3F3EC849F34C9F17A5CD1C7
-:100E2000FDFFA9F9DF2BE0718A38027E381451C228
-:100E3000DF51949862A2E7D47D6953D68A81FD3749
-:100E4000E51A789E57F3DF4407F3BDEFE78AB789C9
-:100E50009A1622A410FDC979BF2D4EA1F60F7E313E
-:100E60006E32E4EB5A39F8FB88D7C9D703DFCAEBF7
-:100E7000FCE0AB3ED3A2A0B874254E167C2EDBCB93
-:100E8000720CB097724D86AE9809D1904FBF775CC7
-:100E900034E28E1E87FA8FED8F7007C9ED2CC529BD
-:100EA000313E089FF06852701C3BBCEB9174AC5310
-:100EB0006EF66439A9FD4CE3D349C837CA773D9C27
-:100EC000CE79F0AE8DE938CF94373D92EE623CDCBE
-:100ED000CDE729A3DCF7F97D37EEDC14947757E5ED
-:100EE000AB4C7FA9F57021E2EDACEB3E7BC84EE345
-:100EF000D27EA1D8A15EF788EE87101F17203FC6CB
-:100F0000F9ADC1CAFE9CD67341FECD137EF81CEC30
-:100F1000F878C6C7A6321A7729D7C8FC5920BC9BD7
-:100F2000E3A95F6C50ECCD2278FC98468C5FB44E00
-:100F30003127C00F2C1F36597560DE30A663F1864D
-:100F4000C95D685FB05AB6CFB2780F9CC03ABF3562
-:100F50003B9B1DEC6F524A260DD07F29D7CCF31650
-:100F60006E5638FFD7BF93F6445C63F03E2F69F2AC
-:100F7000175F5B14C8E5479A5C6E5DFDEE91045AFD
-:100F8000D71EEBBE0CBFF1CEE3A753FDD45E1073AA
-:100F900036137A9E66763F55817D37599CD84776C1
-:100FA00056A21A4FE3A7FC34F731C085AB173D5565
-:100FB000017FBBCDCAE7369DBE958AD3007FFC4634
-:100FC000E38F17836F671EB772DEBEB2717CBC18E9
-:100FD000C24E75B89BE4EFA083CEDE7A2BC317EA2E
-:100FE000EDC241FAB0AF3E81F117EB1D0CC53CA933
-:100FF0005F2BB5F3F1B5D69BFA55B870503E9BBD4B
-:10100000C1261CE4A792E25CA3F2689F69136B9A65
-:10101000366AFB4AA3F9933DC9F9E043F6C6155D6C
-:101020004879CD79F23CF6D6890D4970CACB567F06
-:10103000B8A382FAE7E4958CCBA376EBF6CFB9AEF2
-:10104000F046C7C30BC0EFF2268BDC9FB6EF338FA1
-:10105000A7C73F45EB7BDE34F179BF6EFB873B369C
-:10106000125CB279853958DFBFEB7E93357ABECDFD
-:10107000AEAEC5877FDCAE1E4962FB6922BBCAFCEF
-:10108000E7EDAA6EF51AE6DFFD7925B3C0F7332642
-:101090004F12ECE9CC849B59CF3D8714E6BFEEC7D5
-:1010A000F5F9C5DA7EAB0CBECDD39307FCF84591BC
-:1010B000CDFC3DDCF1693AF2DE8BEDF3FFEEBE0FC5
-:1010C000D2BEFDB4EF76E2AF7FFCD5FDD3CCEE719E
-:1010D0004EDADF3483CC77AFCA5BF30C5ABDA0DBAA
-:1010E0005C122979AEA02EA3C54F8A639E68A2A781
-:1010F000BA53F18765219EDD72D688F31E9D1B3F92
-:101100000ACE23E8E7A3A0B87D2D7ABF0DD6629D55
-:10111000B401BFFBBD3F19843F284EDFD81326FC26
-:1011200041DFBD723EA13633C9A9B76324FB05C8B0
-:10113000CD887A5CC78426E067CD528EBD07296FC3
-:1011400092751CA14E1BD8E7D98EF359F0B3A1FBC1
-:10115000AD7DE53CEB4775FBC39F2BBCFF99678DCD
-:1011600059DFBEFFC3BBCE67417E674D3DD370DE06
-:10117000EA35F764410EB5AF4A7FFE8FF2416FAF9B
-:10118000D8401B213BAF55ACAC2785EA05AE1BF41C
-:101190001E937583DA8E9DEC4FFB3B65FDA6CED08A
-:1011A0005D148F7AC7F20FBBE0CFFA13E4398AD609
-:1011B00077816FD3C76971D0D8973487FCDA4B57E2
-:1011C000F4419EFFCEC07EC7631D5F35FC80C80A18
-:1011D00017C82BCEC19EA97DC1AAE4F5D0F333DE9A
-:1011E0001153E01FDFCAFA6B2DD7FB5E0BB7AB9C28
-:1011F000F7506B90FCAEECC3AB0AD7A07A40B87046
-:10120000058DAB333B7EC4F9F1715520AFAB9B2804
-:10121000ED49BC22EDA966DD617342D07A3B604F97
-:101220004CB7CC1767BDF657B6CBD5335C9DB0CB6A
-:1012300070F842AC9710ED55146D1CC9BF56A32130
-:10124000A2533BF717ABDC5FD7AE8A91989310E9B6
-:101250004DA37D148B2D46E4D3B3846F3AEA36C296
-:10126000D8F3AB9BA87FF66BEAD44D82CF4F0B4BE4
-:10127000F85CE94E5D89FCC8A0687CF565CF098EF5
-:101280006779324E4D57158E637D23C3394F993997
-:10129000AFA614F4EAE3B286C971B40EE759C2DB13
-:1012A000973507F6E9EFCB9A1B3930EECED7C297C8
-:1012B000735C14BEEC3B83BE13962FEBA35F501CF4
-:1012C000819ED45D94F58E42F5EB27909FAF3C4410
-:1012D000FA82FCD090FC9E017E9CF80CB99E27B946
-:1012E000BA107FDCC2E582FD4C1AE185FDD4ED53D6
-:1012F000841175A20E4B13EA48B5A69E38E8F3C6D2
-:10130000F63F9AA1CF756DEF9A1D93305FD69DC8B9
-:1013100020D98FD769F1ABA67DFC7BA8F3D51C93B0
-:1013200051B4C6F82E9FDFAB0EB4F239BD5AF8F9AE
-:101330009C5EDD32585FFA131C5C1709B58FB07CD8
-:10134000C720BB98B94DDAC59DAA580E3F27B43ABD
-:10135000EDCC8478CE4706E6C97CD7A59E7F08F9F8
-:101360004B2045712AB45420CCB30E7991275DE609
-:101370003381DFBD90BD94FD8A37FB76DA5740CBD1
-:1013800077676ED86A5483E899D929EB92813051F6
-:101390007E90E5ED1E0D39085749447E0EDB55164B
-:1013A000FC6AC020EBA8A1FBA8D7EA45C7514FCAE9
-:1013B0001CA07B7662A2F463C2CBFAD36590DF7780
-:1013C00019A87FCAC0FCC5F972FEC07948D6C1AE63
-:1013D000E55776917CCA483E7B48CE80CF533C2E61
-:1013E000233FD342F118F8BF523C06F4D56770FB97
-:1013F0004BF54EC60FD4DFC0F8C17A17E3EDF5C543
-:101400000C5FA92FE1F6E320F5FBF8DFD38DD08741
-:101410002ED8D8A801FC644C083E6AF0F89331CA73
-:10142000607C94C2E3B3F39F6EF464A26E6AD7EC5F
-:10143000DB1189FCEB8C4DD6A1CED8641DAA759426
-:10144000FBA67CEA2F9BB976973C87BAD231AE20B7
-:10145000663E9F5FFBE9FC0A7FB422DF9D07B91C53
-:101460003B969FBA95FDA48DEBA027EFBA2E9AEB81
-:10147000806FD2799C3E9D9B31755D36E1B9110A32
-:10148000EB2FF98BEB4BF47325AD93DF29EF510A6A
-:10149000D5EA32ACBF72A46D2AFCEF172EF7ADA0CF
-:1014A00043E777D1A865A9C887BA4C8EF750C7F52E
-:1014B000FCDE24709ED2EB7DFAB80E57EE5D9837B5
-:1014C0003363DCBA29F03B6464F0732EB368015DCA
-:1014D0002E43B8B296FD96C3083F7097A6C7790E03
-:1014E0009917FBCD0E630CEA3761B9B11E9AD7A5E7
-:1014F000C9F99826E7E39A9CDF469D8CE03BD40E21
-:10150000D84DED809374FE1AFB986F4FE49594B11B
-:10151000FE8ABE24E07A5D7016EC4BFA9B24E8F557
-:10152000664D7F13347FD3955B5225E7F9789D2A6A
-:10153000ADDE765EBB07D1F7ABCF1B982F18CEBDC3
-:101540005E78ACF0F32FCB73A7184DF908E1735F09
-:101550008E673FA45A6FCFFC84EC7CEE54790E105A
-:10156000FB2D725C82230776B256ABB7F67A0D1E5E
-:1015700013EAD331DDE93188BF9A7DE9F8C1BFA90B
-:10158000ECAF6BA6104EF05545EEAF666E77FA30B5
-:10159000CC576C06AE6F37C9FE139AFDD5A468EB25
-:1015A00069FB11565F12E41138F472D262C23745FA
-:1015B000F8974ABFEF4F677F2DFCE973E11715DFFE
-:1015C00007C2497965C1D4C5C691E0876F07F0EAC3
-:1015D000829CC5C61BD1DFFA813DB87F842F49B1FB
-:1015E00003CF96FD235A770C7306E1A6973E40BFC2
-:1015F000D990B3B880F0D916EFB17AE8CD8B52BF4D
-:101600006CFBDA4E836F551D326FCFDBD776E12549
-:10161000C4E5B64827DCFBDEFC64E6F7DA8EDD9B2A
-:10162000A16FBDADF23E6053CB1F77FC92C75970DE
-:101630004D42EBFAB2057D67C591FF5804BA668743
-:10164000FBBE04FEE091194CE7ECE1D2AE1F3E92E6
-:10165000B71876DADBB6EF67B0BFD9D194D0829EE7
-:10166000176C5C87A8DC3FA10076DA1BD9BD00EBC4
-:10167000D73E6F71424F2BF7C7E7A13E70305FD660
-:10168000C32B266E49429C35BCB277D72F71BFFA67
-:10169000BC8DEF85EA62649E57A9364E5BC1F2DBD2
-:1016A000B9EB69D0BDD7C6F7B315A855115EB12BFC
-:1016B0008DEBF8AF7EF3F102C8A150DDBE0BED5FFC
-:1016C0003E6733800F27CCAEE89B6187274C7CDEDA
-:1016D000ACD0F08A93C3253DE13D452CBFD82D49C0
-:1016E00088B395C37F7E1BE89EAD6ED981F38ED8FB
-:1016F0006DE1BB89B37B896F34EF6CB3690AA4DCFD
-:10170000BB37D2087D39AF6C59F014D66F96E3CE53
-:10171000DBB6303F3DCDE305BE47E304FCD679653B
-:10172000EBA0F6B3CDBBB3701E3DF7FC6C3E97EA61
-:10173000FAABDB4BE573964171913D01F9A34AED9C
-:101740006F61F788088AB7151A7AEEE093BD4F8962
-:1017500081F9E75A4C7E33F1A8C222D6596306ECD0
-:10176000A132F19662ECAFD2D0988EBCA5626ACF5E
-:1017700002D8C5599BB026D0B8B7B4B8557960CD5A
-:101780001CE4BFD7A2E7B2E68F2E26C8F875B1DDFC
-:10179000E60DBE970C85EFD70BFBDB6903F83DCB5D
-:1017A0002D9CC3EBEBBD65F655E39C561B23FDC793
-:1017B0000734BE85FCD8375ABC5BB86AF0F8FEFC2B
-:1017C00018FE7EADB9271DF14F5F3F90AFFBB59E70
-:1017D00074F8ABD079B3918EC08FBCA0B01FA93C78
-:1017E000A07CA8129F2AAD1EAF0ABE08B3BE4FE36D
-:1017F0006545CE4B98A6F19DE66E2848E6EF56B6B5
-:10180000D85C369A5715D61385BCA83AB2270AF980
-:101810004EEF2BAA68D2C4151BA7C92745135950F0
-:10182000BDB1C26772D9B2869033F2271AB70C7F66
-:10183000D3F79F2948E1FD94B787F3F784BD671A72
-:10184000F4B47CFBE079D8973DC8FE7ADB77C60517
-:101850009FCB5334BA03CA876C27816F3E4A82DC20
-:101860002B0D621DEE2FCFD11CDC6B122EAC12E7BC
-:101870007BCFCABF4484415FCE5DAC66BBED557A79
-:10188000D8AFBD533087FD52AFA987FDDA1B47EEB5
-:1018900064FFD03BAC6701FCD43B05CB64FFC89E22
-:1018A000050EEADFA7E36304C7FDF78FD4B0FF9806
-:1018B000ADCA771562A7C92EEB411B4ED6F3F9C20C
-:1018C000E4083E7F9F2AD0EA3D03F2E173976E372A
-:1018D000BDC2B1EF00ECB03C82EB3A9447B5BC849A
-:1018E0007C6F7E9C13EF35CA314FEA8139F8BE31E7
-:1018F00036E6D252C8E7F6D1EEA2821CDC6FF6F0D3
-:101900003982B49AE34DEDEF2C7C9E0C98FA76C1A7
-:101910004FA58F76CF2A203AAACDDDEBB389A40B51
-:10192000A69E2E94C867A9D21F89DD52AF7A33775D
-:10193000CA7B1AEDBEF22E8DFF820E318DD00B4583
-:10194000CAF78DF6FD6FC3AFF4768F637F1C6A37DD
-:1019500067DB1F8B827FF813C5714FD079FF4F8BE8
-:1019600076F33DEB3CBC0721B878DD607DE8FFFAFB
-:10197000763EF789CD41EDD0C386C178A81E411FC0
-:10198000FD83FC8E87F9BE4DB3ABAABCEE5AF0E1E5
-:101990000A3E977035087F3D040F192F4A649EB0A8
-:1019A0000DF19FF8513DC67F92CFE9FB4C027E7C42
-:1019B0002DC52FC6DBC2BD38AF18F6517C8A95F114
-:1019C0000971A12AAA9BEB53BD6D16BEEF7DB0E352
-:1019D000D324EC9FF490EB30551D2FC7E1FCBE578C
-:1019E0003B2F501C8CE3F7316D1D713877E8EDD536
-:1019F000065F3AE8A28C88F375BDBD46F5A783FE65
-:101A00002AA53B0BFD7B41378F275C052E781FD520
-:101A10008AB477D1A1B23F0F95DB939ABE925FC88B
-:101A2000E2F71DAFC8FA80EE072A347FF23ADA33C4
-:101A3000A5DDDBF57B259A5A017B1FC23F2414E804
-:101A400079F172AEDF3C5EE090B8369FD795F52510
-:101A5000EEAF7DF57C564A26E669E382FDD0B801FB
-:101A6000BF02FB4F60FB7FD01447FBAADCA138D735
-:101A7000C24F95AE29A2E16299714511D7CD8487F5
-:101A8000CF6DA17485EAD1E402C9A74AC3B0C2D818
-:101A9000A0F5CE914F4F98C27EC60FBFF393D847A3
-:101AA0008B50A7F871A97C377025DE04DB39F6B3BB
-:101AB0005DFA7198CD65C3D57ABC6C79E3FAF821EB
-:101AC000E808A5B3C2DD5814E7B8BA5DA7F79C4D86
-:101AD000A72FCF3422980FF3D6148D20B8CCFACF8D
-:101AE000F241EEF75C87C58FB85A51BA627DF410A7
-:101AF0007A73553CD81E14BF52205F2FDF6F5C8B6A
-:101B0000FE5058ADF84FA25E24C8AE9AD9BEC85E4A
-:101B100082E2C28D05217587F2456391570BF7A2CA
-:101B2000B1883364570B9C439C2FC9418E32F09B84
-:101B3000110FC3507AFE5C20DF25DD5820ED7CF5C7
-:101B40000C57007EF366D5C07978E87A5F15C87CBB
-:101B5000A23B2EF23EFD3D07847DB32AF99668E84C
-:101B60007F07F6961817E9C07D50617EB81C77C8CC
-:101B70006647FD2670E812D777030F45CC93F7062A
-:101B8000116224F577254C6A0A8E23BF2994FB0D38
-:101B9000CF96794B5D86E9EFD7873223AFD487386C
-:101BA0006FC80CE7FB92DEF62F386E053A73ECB87F
-:101BB000D7E8EDA6D321D953DD37FF1D87F8DADB4F
-:101BC000F9677E87D6FBF5A7FC3E6DA3F63EF0F5E0
-:101BD00076ED7D57B72312ED81E28F8B306E930641
-:101BE00007EA04B25EAC43FDFCABD70382CEC1A3CF
-:101BF0000B873E07C7B82382EB048EF8A1EA2AC1FF
-:101C00007582D434592700449D20D524EB04C0515B
-:101C10002700449D00EDA81300479D0038EA04C04A
-:101C2000512700449D00ED5FCE93EF6502A4C4B23E
-:101C30007E19C1FEFDDE66D58BFCFCDE43F21EEA9A
-:101C4000DE4685DF695DA0EF23CE5DF55EE780F6B9
-:101C50005EC7B795EFF5EADA5427445567EA3B8A41
-:101C6000BA4E5DABE25C03FF523F8FBFBFB133E7BB
-:101C7000BD52B4379B9C0607E474310EF5AACACE58
-:101C800066AE3F15C41F32B37C5B14817AE99D16A2
-:101C900079CEAD51A9750ADF87721E5C63E9E6F360
-:101CA00047D51EC55E167C9F7BC3E7EC07D6DAA23C
-:101CB0009A40678DCF662F1BE2FD07DF0B3BC49573
-:101CC000FBE6A57288A88928E2FBE6A5B867262866
-:101CD000D4AF8D7C7F4C07D3E1D047BCABCA805BCF
-:101CE000B74BBB0F794F55D9D9BA3E515C7D0F8D9B
-:101CF000CA00E41F7AFFEC2E8C8C3D1D0E47212676
-:101D0000236F2A7EBC6C5F1B7DAF7F8B85F38E15A6
-:101D1000F9EE65D0A3A32617D7498E1EB2F1F9E8D4
-:101D200093ADE307D549BE70B9AB0BF97E7E34D7CE
-:101D30002D569A148ECBF9C5E3E2F9DDC03113C7F5
-:101D40009F0E57492DC6AD9CE4E0FA54A145DCC76F
-:101D5000EB68EFB408B23D15AE55BC06C21709A733
-:101D600019F6B390D8C6FA628AD880F7540B857CEE
-:101D7000DFA0EBCDCAAD0AE7055C2888C3BDA4E4AB
-:101D8000EFC2CE7FBB84F70B4B2C327F4D34C8FBA8
-:101D9000ECC44DF27DCB4F84DB8C78BB8CE22220EF
-:101DA000C5C9DFF550BB3B7C7492CCCF1DF1587F89
-:101DB000D17113BFF72D8CFF61BA9BE37501BF632F
-:101DC00050FC77AB97AFBBB6FD84BE63386A92FE1A
-:101DD00085F8C8E7A22EE825D767DC0C8FD79733A4
-:101DE0009C3443FAC72BEF12494676D01FDEF70129
-:101DF000CE8B89F1914EF83BDDEEAF7A9F1826A18C
-:101E0000FE3E710C4111F43E71B3CBC1FE2ED17078
-:101E100062AA03FCF84B8413FCD0DF29AE9E51B2BA
-:101E200013727245090FBE8B7B942DC4D7226C446C
-:101E3000419DDBE75251B73EA4D8F95DF4557E725F
-:101E4000EB4378C75397AAD81507EAE15B0AE38802
-:101E5000EEA29464A6BBAE5DD64B994371A8A76B66
-:101E6000F6E072B7158E18689FADD9452F8D977A19
-:101E7000729317FAF61DEAA8CF61BC47D89CCDDA59
-:101E8000790D729F7DDD18AEA7EA7AD3DF12DF04E9
-:101E9000BD79B350C699D2D2774DC803BA72DD4727
-:101EA000B0FF05659F3F14C7FB1BBA8E457E94EFBC
-:101EB0002543EB58BA5FDEA5D5C1E13F8D5A9DD5CC
-:101EC000A8D5598D5A9DD5A8D5598D5A9DD5A8D537
-:101ED000598D5A9DD5A8D5598D5A9DD5C8F5BBE5C4
-:101EE0000CDFA95FC5B0BBDEC3FD41FEFFFD6BF893
-:101EF000FFD03AE8C718175A0715564734C751B2EA
-:101F00006F597F0EA97B160F5FBC81F897DF607653
-:101F1000A249AF83E2FDF2BD11EC0F2E140E59FF62
-:101F2000D4F916C1F5D27E619B02FEE7658C331AA7
-:101F3000A8FF2F9A1CF4FA23EC03FB837D00C23E1A
-:101F40008C6903F6F18C994C385BC67B0FC77B1B01
-:101F5000CB75FD1AF21F842F11F641FEE34288FF74
-:101F6000A083C75DA06369A77CD7A4BFDFCC23F0A3
-:101F7000D59421FC894FFA933161BEBDF8CE98DA31
-:101F8000307E1F7C547B8F7574A37C1757264AF8CC
-:101F9000BB43F89528C863C9F0BE0F9EA6F14B1E3F
-:101FA00089E0BC65FDC8A5D3FE377EE5F342C98F45
-:101FB000DFD6FB2B3F215A0AC2A4FE15984506EE38
-:101FC0006B84218CEDA050DDACE07E74E53D623287
-:101FD000E45C6029D90E3AE3B5FB6D11ABD55B8D9E
-:101FE000DD15BB093F1197E8C4BDD6E8848302EF35
-:101FF0009F0AEB8A33E117FD63DC138A72F07E7966
-:102000008B82F9E19972FFB717873741AF0287C614
-:10201000E740DE732D8E36D4019C45094B70CE9F70
-:102020001BEDC8411DC0D9354AE2F18E36C5895431
-:1020300036614901BF3FB36EF9C48A776B8A88A6BF
-:102040007D5986B973F09D9AE2CFE4B959F4711CB9
-:10205000BBB1489EBF46BC2EFCB8B7EA9B19C9F776
-:102060006722D391837ECA2BBF5F44FA77E407AE21
-:102070009B0013353AE3718BA842AADD36C0E3DA40
-:102080007D5E97C15D0A5814E53172BBC19B0DF8A6
-:1020900096C1F753B4933E17619DA2C7264FCC203B
-:1020A0003CD1E2633FD9E172DD02FA5E9CE12A068F
-:1020B0000CAD9F43B638E7133DB7A23FF41D962EF3
-:1020C000CF254552EFCB8AA4FF98BE56DEC786CAFD
-:1020D000BDACC8A0F9B7BF4F37D15B8AEFE9F48B2D
-:1020E0002D8BB2410FD17B0FF641F42E001411312C
-:1020F0005CEFB8B69E79F87B654552BFC89F557DA9
-:1021000022FD19C374A37718F2C7510F788781DEB7
-:10211000518D7D36FC3B8C673D7D36C4F76757F7A4
-:10212000D9D0FEAC4BBE930E5DBFB148BE9F489F59
-:10213000DEC7F3C7D2B7BA394FEF1B863C2ABDFCC6
-:1021400093F5F2DE2583E3CB582DBE8C7D20A5BD13
-:1021500087F46DEC93D17CBF2D0A62B9BFD22AED12
-:10216000B4F281B2836D04C76F237A83F2AF095E44
-:10217000A27B505E64EC97EF2D09079FF6981887B5
-:10218000CE22BFAA11F2BDE528CD6F206F2B25BF4F
-:1021900050537EE412BF03C07CAC8F3B5BE85FBB57
-:1021A00049E214AE711E5D366F4D179F0FB75D6922
-:1021B000D7CE9BADEB717EA6FC6D507B65D9E12E31
-:1021C000C49BAA3D83DB6B967FCEE758CADF06B57A
-:1021D000DFF3D30FF99D4D5DFBE07692EF5390BF97
-:1021E0002EDFA326DF049CF78ED68439E5BF1FF0CF
-:1021F000AD80BD375547F0FBD99DBFC963BDD1E563
-:102200004DF39BBE9B7EACE5F19E3C91017BF83685
-:10221000D80BFF9436C83F79B8CE372B92FD4E9D30
-:1022200076BEAA2DB3739C4FACB5B2FF2A54C39CA3
-:10223000C06B8DD2CF886255F3533EB6FF13B70DF6
-:10224000E37A1E6F0078CC247E771CB756E27D239C
-:102250002CEC1F0A0D25D5BB091E312C673F908041
-:10226000179724F767E01F54D8AFBC7FA833FB143F
-:1022700079BFEFC8C17957BF6F6AD8E86D3D80F369
-:10228000B2E27D7229EA8A7744F0FD4100F546DA30
-:102290004FC330E9471BE6A7731C088892D215C8C4
-:1022A00043E68571FDB16198E351DC2736544CE477
-:1022B0003CFAE0DF64DCED9B6375228F6A98EC5892
-:1022C00083F72A0D0F38B8FF5545AEE77954F2A7CA
-:1022D000618EDC7F43450C9F7B74393434BA46E20F
-:1022E0007E6AC618F77F426EA3B4FBB986646A277C
-:1022F000F8845232FF27586792A477D20C07CBEDAF
-:10230000E8FC898FEE727038F1E39EA86E56E4A067
-:1023100073F1FF008751D9F610370000000000006C
-:102320000000000000000000050015000000000093
-:00000001FF
diff --git a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
new file mode 100644
index 0000000..280bbcf
--- /dev/null
+++ b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
@@ -0,0 +1,12847 @@
+:1000000000003BE8000000600000068800003C5053
+:1000100000001968000042E0000000AC00005C50E5
+:1000200000008DE400005D00000000EC0000EAE844
+:100030000000E3000000EBD8000000940001CEE0D7
+:10004000000058E80001CF78000000C400022868D2
+:100050000000F9700002293000000004000322A80B
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:1001800002040014000000FF02040018000000FF39
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200204203C00000000DE
+:100240000204204000000034020420440000003575
+:10025000060420480000001C020420B80000000131
+:10026000060420BC0000005F0204223807FFFFFFE5
+:100270000204223C0000003F0204224007FFFFFF6F
+:10028000020422440000000F010422480000000084
+:100290000104224C00000000010422500000000074
+:1002A0000104225400000000010422580000000054
+:1002B0000104225C00000000010422600000000034
+:1002C0000104226400000000010422680000000014
+:1002D0000104226C000000000104227000000000F4
+:1002E00001042274000000000104227800000000D4
+:1002F0000104227C000000000C042000000003E840
+:100300000A042000000000010B0420000000000A85
+:1003100002050044000000200205004800000032F1
+:10032000020500900215002002050094021500202D
+:1003300002050098000000300205009C0810000033
+:10034000020500A000000033020500A400000030F8
+:10035000020500A800000031020500AC0000000208
+:10036000020500B000000005020500B40000000610
+:10037000020500B800000002020500BC00000002F7
+:10038000020500C000000000020500C400000005D6
+:10039000020500C800000002020500CC00000002B7
+:1003A000020500D000000002020500D40000000198
+:1003B00002050114000000010205011C00000001FB
+:1003C00002050120000000020205020400000001F5
+:1003D0000205020C0000004002050210000000406F
+:1003E0000205021C0000002002050220000000138C
+:1003F0000205022400000020060502400000000A59
+:1004000004050280002000000205005000000007E3
+:100410000205005400000007020500580000000813
+:100420000205005C000000080205006000000001F9
+:100430000605006400000003020500D80000000665
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C000020500E00000000D020500E80000000742
+:1004D000020500F000000007020500F80000000718
+:1004E000020500E40000002D020500EC00000027DA
+:1004F000020500F400000027020500FC00000027B0
+:10050000020500E00000001D020500E800000017E1
+:10051000020500F000000017020500F800000017B7
+:10052000020500E40000003D020500EC0000003779
+:10053000020500F400000037020500FC000000374F
+:10054000020500E00000004D020500E80000004741
+:10055000020500F000000047020500F80000004717
+:10056000020500E40000006D020500EC00000067D9
+:10057000020500F400000067020500FC00000067AF
+:10058000020500E00000005D020500E800000057E1
+:10059000020500F000000057020500F800000057B7
+:1005A000020500E40000007D020500EC0000007779
+:1005B000020500F400000077020500FC000000774F
+:1005C0000406100002000020020600DC000000010A
+:1005D000010600D80000000004060200000302200B
+:1005E000020600DC00000000010600B80000000068
+:1005F000010600C800000000010600BC0000000069
+:10060000010600CC000000000718040000A900004B
+:10061000081807C800070223071C00002C2100004F
+:10062000071C800038930B09071D0000292B192E89
+:10063000081D685052F60225011800000000000055
+:10064000011800040000000001180008000000006C
+:100650000118000C0000000001180010000000004C
+:100660000118001400000000021800200000000122
+:1006700002180024000000020218002800000003F5
+:100680000218002C000000000218003000000004D6
+:1006900002180034000000010218003800000000B9
+:1006A0000218003C00000001021800400000000495
+:1006B0000218004400000000021800480000000179
+:1006C0000218004C00000003021800500000000057
+:1006D0000218005400000001021800580000000435
+:1006E0000218005C00000000021800600000000119
+:1006F00002180064000000030218006800000000F7
+:100700000218006C000000010218007000000004D4
+:1007100002180074000000000218007800000004B5
+:100720000218007C00000003061800800000000290
+:10073000021800A400003FFF021800A8000003FFF9
+:100740000218022400000000021802340000000019
+:100750000218024C00000000021802E4000000FF32
+:100760000618100000000400021B8BC000000001EE
+:10077000021B800000000034021B804000000018B3
+:10078000021B80800000000C021B80C000000020C3
+:100790000C1B83000007A1200A1B83000000013806
+:1007A0000B1B830000001388021B83C0000001F4B0
+:1007B000021B1480000000010A1B148000000000CE
+:1007C000061A1000000003B3041A1ECC0001022711
+:1007D000061AA020000000C8061AA00000000002AF
+:1007E000021A1ED000000000061A1ED800000006E3
+:1007F000061A36E800000004061A36E0000000027F
+:10080000061A500000000002061A500800000004FA
+:10081000061A501800000004061A502800000004B0
+:10082000061A503800000004061A50480000000460
+:10083000061A505800000004061A50680000000410
+:10084000061A507800000002041A404000020228F4
+:10085000061A400000000002061A400800000002CC
+:10086000041A62C00020022A061AD1000000000209
+:10087000061A200000000124061AB000000000281B
+:10088000061AB1400000000C061A330000000014E4
+:10089000061A33A000000068061A81080000000252
+:1008A000061AD1C800000002061AD1D800000020A4
+:1008B000061A249000000124061AB0A000000028A7
+:1008C000061AB1700000000C061A33500000001424
+:1008D000061A354000000068061A81100000000268
+:1008E000061AD1D000000002061AD25800000020DB
+:1008F000021A292000000000061A30000000000241
+:10090000041A30080005024A061A301C00000009CB
+:10091000061A320000000008061A5000000000020B
+:10092000061A508000000012061A40000000000263
+:10093000061AD0C000000002021A2924000000009C
+:10094000061A304000000002041A30480005024F29
+:10095000061A305C00000009061A32200000000868
+:10096000061A501000000002061A50C800000012BB
+:10097000061A400800000002061AD0C80000000253
+:10098000021A292800000000061A30800000000228
+:10099000041A308800050254061A309C0000000931
+:1009A000061A324000000008061A5020000000021B
+:1009B000061A511000000012041A401000020259D9
+:1009C000061AD0D000000002021A292C00000000F4
+:1009D000061A30C000000002041A30C80005025B8D
+:1009E000061A30DC00000009061A32600000000818
+:1009F000061A503000000002061A5158000000127A
+:100A0000041A401800020260061AD0D80000000242
+:100A1000021A293000000000061A3100000000020E
+:100A2000041A310800050262061A311C0000000990
+:100A3000061A328000000008061A5040000000022A
+:100A4000061A51A000000012041A4020000202679A
+:100A5000061AD0E000000002021A2934000000004B
+:100A6000061A314000000002041A314800050269EC
+:100A7000061A315C00000009061A32A000000008C6
+:100A8000061A505000000002061A51E80000001239
+:100A9000041A40280002026E061AD0E80000000284
+:100AA000021A293800000000061A318000000002F6
+:100AB000041A318800050270061A319C00000009F2
+:100AC000061A32C000000008061A5060000000023A
+:100AD000061A523000000012041A4030000202755B
+:100AE000061AD0F000000002021A293C00000000A3
+:100AF000061A31C000000002041A31C8000502774E
+:100B0000061A31DC00000009061A32E00000000875
+:100B1000061A507000000002061A527800000012F7
+:100B2000041A40380002027C061AD0F800000002C5
+:100B30000200A294071D29110200A29800000000E3
+:100B40000200A29C009C04240200A2A0000000005D
+:100B50000200A2A4000002090200A270000000002E
+:100B60000200A274000000000200A2700000000059
+:100B70000200A274000000000200A2700000000049
+:100B80000200A274000000000200A2700000000039
+:100B90000200A27400000000020100B40000000185
+:100BA000020100B800000001020100DC00000001A9
+:100BB0000201010000000001020101040000000127
+:100BC0000201007C003000000201008400000028C7
+:100BD0000201008C0000000002010130000000044E
+:100BE0000201025C00000001020103280000000075
+:100BF0000201607000000007020160800000000137
+:100C00000201055400000030020100C40000000190
+:100C1000020100CC00000001020100F80000000108
+:100C2000020100F00000000102010080003000001D
+:100C3000020100880000002802010090000000006E
+:100C40000201013400000004020102DC0000000186
+:100C50000201032C00000000020160740000000784
+:100C60000201608400000001020105640000003000
+:100C7000020100C800000001020100D000000001D4
+:100C8000020100FC00000001020100F4000000016C
+:100C9000020C100000000020020C200800000211CD
+:100CA000020C200C00000200020C201000000204C4
+:100CB000020C201C0000FFFF020C20200000FFFFA0
+:100CC000020C20240000FFFF020C20280000FFFF80
+:100CD000060C203800000002020C20400000003406
+:100CE000020C204400000035020C204800000020C7
+:100CF000020C204C00000021020C205000000022B9
+:100D0000020C205400000023020C20580000002494
+:100D1000020C205C00000025020C20600000002670
+:100D2000020C206400000027020C2068000000284C
+:100D3000020C206C00000029020C20700000002A28
+:100D4000020C20740000002B060C207800000056D6
+:100D5000020C21D000000001020C21D4000000018F
+:100D6000020C21D800000001020C21DC000000016F
+:100D7000020C21E000000001020C21E4000000014F
+:100D8000020C21E800000001020C21EC000000012F
+:100D9000020C21F000000001020C21F4000000010F
+:100DA000060C21F800000010020C223807FFFFFF9C
+:100DB000020C223C0000003F020C224007FFFFFF14
+:100DC000020C22440000000F010C22480000000029
+:100DD000010C224C00000000010C22500000000019
+:100DE000010C225400000000010C225800000000F9
+:100DF000010C225C00000000010C226000000000D9
+:100E0000010C226400000000010C226800000000B8
+:100E1000010C226C00000000010C22700000000098
+:100E2000010C227400000000010C22780000000078
+:100E3000010C227C000000000C0C2000000003E8E4
+:100E40000A0C2000000000010B0C20000000000A2A
+:100E5000020C400800000411020C400C00000400C9
+:100E6000020C401000000404020C40140000042195
+:100E7000020C401C0000FFFF020C40200000FFFF9E
+:100E8000020C40240000FFFF020C40280000FFFF7E
+:100E9000020C403800000046020C403C00000005F7
+:100EA000060C404000000002020C40480000000A0E
+:100EB000020C404C000000F0060C40500000001FE7
+:100EC000020C40CC00000001060C40D00000003AAB
+:100ED000020C41B800000001060C41BC00000003F8
+:100EE000020C41C800000001020C41CC00000001CE
+:100EF000060C41D00000001A020C423807FFFFFF29
+:100F0000020C423C0000003F020C424007FFFFFF82
+:100F1000020C42440000000F010C42480000000097
+:100F2000010C424C00000000010C42500000000087
+:100F3000010C425400000000010C42580000000067
+:100F4000010C425C00000000010C42600000000047
+:100F5000010C426400000000010C42680000000027
+:100F6000010C426C00000000010C42700000000007
+:100F7000010C427400000000010C427800000000E7
+:100F8000010C427C00000000010C428000000000C7
+:100F90000C0C4000000003E80A0C400000000001B7
+:100FA0000B0C40000000000A020D0044000000325B
+:100FB000020D008C02150020020D00900215002089
+:100FC000020D009408100000020D0098000000338C
+:100FD000020D009C00000002020D00A000000000B5
+:100FE000020D00A400000005020D00A8000000058D
+:100FF000060D00AC00000002020D00B4000000026B
+:10100000020D00B800000003020D00BC0000000249
+:10101000020D00C000000001020D00C80000000227
+:10102000020D00CC00000002020D010800000001CA
+:10103000020D015C00000001020D016400000001CE
+:10104000020D016800000002020D02040000000110
+:10105000020D020C00000020020D021000000040F2
+:10106000020D021400000040020D022000000003E7
+:10107000020D022400000018060D0280000000127C
+:10108000040D03000024027E020D004C000000014C
+:10109000020D005000000002020D00540000000884
+:1010A000020D005800000008060D005C000000045E
+:1010B000020D00C400000004020D00040000000145
+:1010C000020D000800000001020D000C00000001EC
+:1010D000020D001000000001020D001400000001CC
+:1010E000020D001800000001020D001C00000001AC
+:1010F000020D002000000001020D0024000000018C
+:10110000020D002800000001020D002C000000016B
+:10111000020D003000000001020D0034000000014B
+:10112000020D003800000001020D003C000000012B
+:10113000020D011400000009020D011C0000000A4C
+:10114000020D012400000007020D012C0000000721
+:10115000020D01340000000C020D013C0000000BE8
+:10116000020D014400000007020D011800000029D3
+:10117000020D01200000002A020D012800000027B6
+:10118000020D013000000027020D01380000002C84
+:10119000020D01400000002B020D01480000002755
+:1011A000020D011400000019020D011C0000001ABC
+:1011B000020D012400000017020D012C0000001791
+:1011C000020D01340000001C020D013C0000001B58
+:1011D000020D014400000017020D01180000003943
+:1011E000020D01200000003A020D01280000003726
+:1011F000020D013000000037020D01380000003CF4
+:10120000020D01400000003B020D014800000037C4
+:10121000020D011400000049020D011C0000004AEB
+:10122000020D012400000047020D012C00000047C0
+:10123000020D01340000004C020D013C0000004B87
+:10124000020D014400000047020D01180000006972
+:10125000020D01200000006A020D01280000006755
+:10126000020D013000000067020D01380000006C23
+:10127000020D01400000006B020D014800000067F4
+:10128000020D011400000059020D011C0000005A5B
+:10129000020D012400000057020D012C0000005730
+:1012A000020D01340000005C020D013C0000005BF7
+:1012B000020D014400000057020D011800000079E2
+:1012C000020D01200000007A020D012800000077C5
+:1012D000020D013000000077020D01380000007C93
+:1012E000020D01400000007B020D01480000007764
+:1012F000020E004C00000032020E00940215002085
+:10130000020E009802150020020E009C0000003022
+:10131000020E00A008100000020E00A4000000331E
+:10132000020E00A800000030020E00AC00000031E8
+:10133000020E00B000000002020E00B40000000423
+:10134000020E00B800000000020E00BC0000000207
+:10135000020E00C000000002020E00C400000000E7
+:10136000020E00C800000002020E00CC00000007C0
+:10137000020E00D000000002020E00D400000002A5
+:10138000020E00D800000001020E00E4000000017F
+:10139000020E014400000001020E014C0000000199
+:1013A000020E015000000002020E020400000001C3
+:1013B000020E020C00000040020E0210000000406D
+:1013C000020E021C00000004020E02200000002099
+:1013D000020E02240000000E020E02280000001B74
+:1013E000060E030000000012040E0280001B02A281
+:1013F000020E00540000000C020E0058000000090C
+:10140000020E005C0000000F020E006000000010E1
+:10141000020E00640000000B060E006800000003CE
+:10142000020E00DC00000003020E000400000001B8
+:10143000020E000800000001020E000C0000000176
+:10144000020E001000000001020E00140000000156
+:10145000020E001800000001020E001C0000000136
+:10146000020E002000000001020E00240000000116
+:10147000020E002800000001020E002C00000001F6
+:10148000020E003000000001020E003400000001D6
+:10149000020E003800000001020E003C00000001B6
+:1014A000020E004000000001020E00440000000196
+:1014B000020E01100000000F020E01180000000EC5
+:1014C000020E012000000000020E012800000000B2
+:1014D000020E01140000002F020E011C0000002E5D
+:1014E000020E012400000000020E012C000000008A
+:1014F000020E01100000001F020E01180000001E65
+:10150000020E012000000000020E01280000000071
+:10151000020E01140000003F020E011C0000003EFC
+:10152000020E012400000000020E012C0000000049
+:10153000020E01100000004F020E01180000004EC4
+:10154000020E012000000000020E01280000000031
+:10155000020E01140000006F020E011C0000006E5C
+:10156000020E012400000000020E012C0000000009
+:10157000020E01100000005F020E01180000005E64
+:10158000020E012000000000020E012800000000F1
+:10159000020E01140000007F020E011C0000007EFC
+:1015A000020E012400000000020E012C00000000C9
+:1015B0000730040000E80000083007D8000502BD2D
+:1015C000073400002EAA000007348000312D0BAB39
+:1015D00007350000358217F707358000396D25582B
+:1015E00007360000142D33B40836321039BE02BF5E
+:1015F0000130000000000000013000040000000085
+:1016000001300008000000000130000C0000000064
+:101610000130001000000000013000140000000044
+:10162000023000200000000102300024000000020F
+:1016300002300028000000030230002C00000000EF
+:1016400002300030000000040230003400000001CD
+:1016500002300038000000000230003C00000001B1
+:10166000023000400000000402300044000000008E
+:1016700002300048000000010230004C000000036E
+:101680000230005000000000023000540000000151
+:1016900002300058000000040230005C000000002E
+:1016A000023000600000000102300064000000030E
+:1016B00002300068000000000230006C00000001F1
+:1016C00002300070000000040230007400000000CE
+:1016D00002300078000000040230007C00000003AB
+:1016E0000630008000000002023000A400003FFF2E
+:1016F000023000A8000003FF0230022400000000B6
+:1017000002300234000000000230024C00000000F1
+:10171000023002E40000FFFF063020000000080055
+:1017200002338BC000000001023380000000001A69
+:10173000023380400000004E023380800000001021
+:10174000023380C0000000200C3383000007A1207A
+:101750000A338300000001380B3383000000138834
+:10176000023383C0000001F40C3383801DCD65007B
+:101770000A3383800004C4B40B338380004C4B4095
+:101780000A331480000000000233148000000001BE
+:10179000063220000000010206328020000000C84E
+:1017A000063280000000000206323DA8000000045E
+:1017B00006323D800000000904323DA4000102C150
+:1017C00006323D00000000200632500000000400F8
+:1017D0000632400000000004063240D00000000243
+:1017E00006326B680000000204326B70000202C215
+:1017F00006326B1000000002043274C0000202C402
+:101800000632DA40000000020632E0000000080064
+:10181000023308000100000004330C00001002C66F
+:10182000023308000000000004330C40001002D610
+:1018300006322450000000B406322AD00000000214
+:1018400006321000000001A002323DB80000000086
+:101850000632500000000020063251000000002037
+:101860000632520000000020063253000000002023
+:10187000063254000000002006325500000000200F
+:1018800006325600000000200632570000000020FB
+:1018900006325800000000200632590000000020E7
+:1018A00006325A000000002006325B0000000020D3
+:1018B00006325C000000002006325D0000000020BF
+:1018C00006325E000000002006325F0000000020AB
+:1018D00006326B780000005206326E080000000CE1
+:1018E0000632DA880000000206322720000000B429
+:1018F00006322AD80000000206321680000001A03D
+:1019000002323DBC00000000063250800000002082
+:101910000632518000000020063252800000002074
+:101920000632538000000020063254800000002060
+:10193000063255800000002006325680000000204C
+:101940000632578000000020063258800000002038
+:10195000063259800000002006325A800000002024
+:1019600006325B800000002006325C800000002010
+:1019700006325D800000002006325E8000000020FC
+:1019800006325F800000002006326CC0000000526A
+:1019900006326E380000000C0632DA9000000002B9
+:1019A00002322A300000000006324010000000021F
+:1019B0000632D0000000000602322A340000000087
+:1019C00006324020000000020632D0180000000657
+:1019D00002322A38000000000632403000000002C7
+:1019E0000632D0300000000602322A3C000000001F
+:1019F00006324040000000020632D04800000006D7
+:101A000002322A400000000006324050000000026E
+:101A10000632D0600000000602322A4400000000B6
+:101A200006324060000000020632D0780000000656
+:101A300002322A4800000000063240700000000216
+:101A40000632D0900000000602322A4C000000004E
+:101A500006324080000000020632D0A800000006D6
+:101A6000072004000093000008200780001002E611
+:101A7000072400002ADE0000072480002E050AB893
+:101A80000824E4A061D202E8012000000000000068
+:101A900001200004000000000120000800000000F8
+:101AA0000120000C000000000120001000000000D8
+:101AB00001200014000000000220002000000001AE
+:101AC0000220002400000002022000280000000381
+:101AD0000220002C00000000022000300000000462
+:101AE0000220003400000001022000380000000045
+:101AF0000220003C00000001022000400000000421
+:101B00000220004400000000022000480000000104
+:101B10000220004C000000030220005000000000E2
+:101B200002200054000000010220005800000004C0
+:101B30000220005C000000000220006000000001A4
+:101B40000220006400000003022000680000000082
+:101B50000220006C00000001022000700000000460
+:101B60000220007400000000022000780000000441
+:101B70000220007C0000000306200080000000021C
+:101B8000022000A400003FFF022000A8000003FF85
+:101B900002200224000000000220023400000000A5
+:101BA0000220024C00000000022002E40000FFFFBF
+:101BB000062020000000080002238BC00000000166
+:101BC0000223800000000010022380400000001269
+:101BD0000223808000000030022380C00000000E3D
+:101BE000022383C0000001F40223148000000001DE
+:101BF0000A231480000000000622100000000042AA
+:101C000006227020000000C80622700000000002BA
+:101C1000022211E80000000006223000000000C08F
+:101C2000062240700000008006225280000000045E
+:101C30000622670000000100062290000000040058
+:101C400004226B08002002EA02230800013FFFFF84
+:101C500004230C000010030A022308000000000007
+:101C600004230C400010031A06228100000000A08B
+:101C7000062286000000004006228C000000003C86
+:101C80000622B0000000020006228800000000804A
+:101C900006228DE00000003C0622404000000006C5
+:101CA00006228380000000A006228700000000407A
+:101CB00006228CF00000003C0622B8000000020062
+:101CC00006228A000000008006228ED00000003C20
+:101CD000062240580000000606228000000000088E
+:101CE000022211480000000006223300000000021A
+:101CF000062260400000003006228020000000081C
+:101D00000222114C000000000622330800000002ED
+:101D1000062261000000003006228040000000081A
+:101D200002221150000000000622331000000002C1
+:101D3000062261C00000003006228060000000081A
+:101D40000222115400000000062233180000000295
+:101D50000622628000000030062280800000000819
+:101D60000222115800000000062233200000000269
+:101D70000622634000000030062280A00000000818
+:101D80000222115C0000000006223328000000023D
+:101D90000622640000000030062280C00000000817
+:101DA0000222116000000000062233300000000211
+:101DB000062264C000000030062280E00000000817
+:101DC00002221164000000000622333800000002E5
+:101DD0000622658000000030021610000000002876
+:101DE00002170008000000020217002C0000000388
+:101DF0000217003C00000004021700440000000825
+:101E000002170048000000020217004C000000907A
+:101E1000021700500000009002170054008000904C
+:101E20000217005808140000021700600000008A22
+:101E300002170064000000800217006800000081A3
+:101E40000217006C000000800217007000000006FE
+:101E500002170078000007D00217007C0000076C12
+:101E600002170038007C1004021700040000000F65
+:101E70000616402400000002021640700000001CFC
+:101E80000216420800000001021642100000000184
+:101E90000216422000000001021642280000000144
+:101EA0000216423000000001021642380000000114
+:101EB00002164260000000020C16401C0003D09085
+:101EC0000A16401C0000009C0B16401C000009C4B0
+:101ED0000216403000000008021640340000000CDA
+:101EE0000216403800000010021640440000002096
+:101EF0000216400000000001021640D80000000158
+:101F000002164008000000010216400C000000010B
+:101F100002164010000000010216424000000000BE
+:101F2000021642480000000006164270000000023F
+:101F30000216425000000000021642580000000045
+:101F40000616428000000002021660080000042409
+:101F50000216600C00000410021660100000041449
+:101F60000216601C0000FFFF021660200000FFFF49
+:101F7000021660240000FFFF021660280000FFFF29
+:101F800002166038000000200216603C00000020AD
+:101F90000216604000000034021660440000003564
+:101FA00002166048000000230216604C0000002466
+:101FB0000216605000000025021660540000002642
+:101FC00002166058000000270216605C000000291D
+:101FD000021660600000002A021660640000002BF8
+:101FE000021660680000002C0216606C0000002DD4
+:101FF0000616607000000052021661B80000000171
+:10200000061661BC0000001F0216623807FFFFFFC2
+:102010000216623C0000003F0216624007FFFFFF0D
+:10202000021662440000000F011662480000000022
+:102030000116624C00000000011662500000000012
+:1020400001166254000000000116625800000000F2
+:102050000116625C000000000116626000000000D2
+:1020600001166264000000000116626800000000B2
+:102070000116626C00000000011662700000000092
+:102080000116627400000000011662780000000072
+:102090000116627C000000000C166000000003E8DE
+:1020A0000A166000000000010B1660000000000A24
+:1020B0000216804000000006021680440000000561
+:1020C000021680480000000A0216804C000000053D
+:1020D0000216805400000002021680CC00000004AA
+:1020E000021680D000000004021680D40000000414
+:1020F000021680D800000004021680DC00000004F4
+:10210000021680E000000004021680E400000004D3
+:10211000021680E800000004021688040000000493
+:10212000021680300000007C021680340000003D62
+:10213000021680380000003F0216803C0000009C20
+:10214000021680F000000007061680F4000000056B
+:102150000216880C0101010102168108000000002E
+:102160000216810C00000004021681100000000419
+:1021700002168114000000020216881008012004D3
+:1021800002168118000000050216811C00000005DF
+:1021900002168120000000050216812400000005BF
+:1021A0000216882C20081001021681280000000861
+:1021B0000216812C00000006021681300000000784
+:1021C000021681340000000002168830010101204F
+:1021D000061681380000000402168834010101014E
+:1021E00002168148000000000216814C0000000425
+:1021F0000216815000000004021681540000000203
+:1022000002168838080120040216815800000005D3
+:102210000216815C000000050216816000000005C6
+:1022200002168164000000050216883C2008100197
+:1022300002168168000000080216816C000000068A
+:102240000216817000000007021681740000000170
+:102250000216884001010120021681780000000169
+:102260000216817C0000000102168180000000013E
+:102270000216818400000001021688440101010158
+:1022800002168188000000010216818C0000000403
+:1022900002168190000000040216819400000002E2
+:1022A00002168848080120040216819800000005E3
+:1022B0000216819C00000005021681A000000005A6
+:1022C000021681A4000000050216881420081001DF
+:1022D000021681A800000008021681AC000000066A
+:1022E000021681B000000007021681B40000000150
+:1022F0000216881801010120021681B800000001B1
+:10230000021681BC00000001021681C0000000011D
+:10231000021681C4000000010216881C010101019F
+:10232000021681C800000001021681CC00000004E2
+:10233000021681D000000004021681D400000002C1
+:102340000216882008012004021681D8000000052A
+:10235000021681DC00000005021681E00000000585
+:10236000021681E4000000050216882420081001EE
+:10237000021681E800000008021681EC0000000649
+:10238000021681F0000000070216E40C00000000B5
+:1023900002168828010101200616E410000000043E
+:1023A0000216E000010101010216E4200000000015
+:1023B0000216E424000000040216E42800000004D1
+:1023C0000216E42C000000020216E00408012004BA
+:1023D0000216E430000000050216E4340000000597
+:1023E0000216E438000000050216E43C0000000577
+:1023F0000216E008200810010216E4400000000860
+:102400000216E444000000060216E448000000073B
+:102410000216E44C000000000216E00C010101204D
+:102420000616E450000000040216E010010101014C
+:102430000216E460000000000216E46400000004DC
+:102440000216E468000000040216E46C00000002BA
+:102450000216E014080120040216E47000000005D2
+:102460000216E474000000050216E478000000057E
+:102470000216E47C000000050216E0182008100196
+:102480000216E480000000080216E4840000000642
+:102490000216E488000000070216E48C0000000128
+:1024A0000216E01C010101200216E4900000000168
+:1024B0000216E494000000010216E49800000001F6
+:1024C0000216E49C000000010216E0200101010157
+:1024D0000216E4A0000000010216E4A400000004BB
+:1024E0000216E4A8000000040216E4AC000000029A
+:1024F0000216E024080120040216E4B000000005E2
+:102500000216E4B4000000050216E4B8000000055D
+:102510000216E4BC000000050216E02820081001A5
+:102520000216E4C0000000080216E4C40000000621
+:102530000216E4C8000000070216E4CC0000000107
+:102540000216E02C010101200216E4D00000000177
+:102550000216E4D4000000010216E4D800000001D5
+:102560000216E4DC000000010216E0300101010166
+:102570000216E4E0000000010216E4E4000000049A
+:102580000216E4E8000000040216E4EC0000000279
+:102590000216E034080120040216E4F000000005F1
+:1025A0000216E4F4000000050216E4F8000000053D
+:1025B0000216E4FC000000050216E03820081001B5
+:1025C0000216E500000000080216E50400000006FF
+:1025D0000216E508000000070216E03C0101012098
+:1025E00002168240003F003F0216824400000000B5
+:1025F0000216E524003F003F0216E5280000000017
+:1026000002168248000000000216824C003F003F84
+:102610000216E52C000000000216E530003F003FE6
+:1026200002168250010001000216825401000100CE
+:102630000216E534010001000216E5380100010030
+:1026400006168258000000020216E53C0000000059
+:102650000216E540000000000216826000C000C0C3
+:102660000216826400C000C00216E54400C000C02B
+:102670000216E54800C000C0021682681E001E0057
+:102680000216826C1E001E000216E54C1E001E0083
+:102690000216E5501E001E00021682704000400027
+:1026A00002168274400040000216E55440004000CB
+:1026B0000216E55840004000021682788000800033
+:1026C0000216827C800080000216E55C800080009B
+:1026D0000216E56080008000021682802000200043
+:1026E00002168284200020000216E56420002000EB
+:1026F0000216E5682000200006168288000000020D
+:102700000216E56C000000000216E57000000000F3
+:102710000216829000000000021682940000000061
+:102720000216E574000000000216E57800000000C3
+:1027300002168298000000000216829C0000000031
+:102740000216E57C000000000216E5800000000093
+:10275000021682A000000000021682A40000000100
+:10276000061682A80000000A021681F400000C0878
+:10277000021681F800000040021681FC00000100F2
+:1027800002168200000000200216820400000017DA
+:1027900002168208000000800216820C000002006F
+:1027A00002168210000000000216821801FF01FFCD
+:1027B0000216821401FF01FF0216E51001FF01FF5E
+:1027C0000216E50C01FF01FF0216823C0000001317
+:1027D000021680900000013F021680600000014058
+:1027E00002168064000001400616806800000002A6
+:1027F00002168070000000C00616807400000007FA
+:102800000216809C00000048021680A000000048CC
+:10281000061680A400000002021680AC00000048EA
+:10282000061680B000000007021682380000800003
+:1028300002168234000025E40216809400007FFF17
+:1028400002168220000F000F0216821C000F000FDC
+:102850000216E518000F000F0216E514000F000F16
+:10286000021682280000000002168224FFFFFFFFEC
+:102870000216E520000000000216E51CFFFFFFFF26
+:102880000216E6BC000000000216E6C000000002CE
+:102890000216E6C4000000010216E6C800000003AC
+:1028A0000216E6CC000000040216E6D00000000686
+:1028B0000216E6D4000000050216E6D80000000764
+:1028C000021680EC000000FF02140000000000016E
+:1028D0000214000C0000000102140040000000017E
+:1028E0000214004400007FFF0214000C00000000EE
+:1028F00002140000000000000214006C0000000040
+:102900000214000400000001021400300000000165
+:1029100002140004000000000214005C000000002B
+:10292000021400080000000102140034000000013D
+:102930000214000800000000021400600000000003
+:102940000202005800000032020200A0031500201D
+:10295000020200A403150020020200A801000030BA
+:10296000020200AC08100000020200B000000033B8
+:10297000020200B400000030020200B80000003182
+:10298000020200BC00000003020200C000000006BA
+:10299000020200C400000003020200C8000000039D
+:1029A000020200CC00000002020200D00000000081
+:1029B000020200D400000002020200DC000000005D
+:1029C000020200E000000006020200E40000000431
+:1029D000020200E800000002020200EC0000000217
+:1029E000020200F000000001020200FC00000006EC
+:1029F0000202012000000000020201340000000277
+:102A0000020201B0000000010202020C00000001FD
+:102A1000020202140000000102020218000000027B
+:102A200002020404000000010202040C0000004045
+:102A300002020410000000400202041C0000000416
+:102A40000202042000000020020204240000000210
+:102A50000202042800000020060205000000001207
+:102A600004020480001F032A020200600000000F1D
+:102A70000202006400000007020200680000000B70
+:102A80000202006C0000000E020200700000000E46
+:102A90000602007400000003020200F400000004BB
+:102AA0000202000400000001020200080000000110
+:102AB0000202000C000000010202001000000001F0
+:102AC00002020014000000010202001800000001D0
+:102AD0000202001C000000010202002000000001B0
+:102AE0000202002400000001020200280000000190
+:102AF0000202002C00000001020200300000000170
+:102B0000020200340000000102020038000000014F
+:102B10000202003C0000000102020040000000012F
+:102B2000020200440000000102020048000000010F
+:102B30000202004C000000010202005000000001EF
+:102B400002020108000000C8020201180000000291
+:102B5000020201C400000000020201CC00000000DB
+:102B6000020201D400000002020201DC00000002A7
+:102B7000020201E4000000FF020201EC000000FF7D
+:102B800002020100000000000202010C000000C867
+:102B90000202011C00000002020201C80000000045
+:102BA000020201D000000000020201D80000000271
+:102BB000020201E000000002020201E8000000FF42
+:102BC000020201F0000000FF020201040000000008
+:102BD00002020108000000C8020201180000000201
+:102BE000020201C400000000020201CC000000004B
+:102BF000020201D400000002020201DC0000000217
+:102C0000020201E4000000FF020201EC000000FFEC
+:102C100002020100000000000202010C000000C8D6
+:102C20000202011C00000002020201C800000000B4
+:102C3000020201D000000000020201D800000002E0
+:102C4000020201E000000002020201E8000000FFB1
+:102C5000020201F0000000FF020201040000000077
+:102C600002020108000000C8020201180000000270
+:102C7000020201C400000000020201CC00000000BA
+:102C8000020201D400000002020201DC0000000286
+:102C9000020201E4000000FF020201EC000000FF5C
+:102CA00002020100000000000202010C000000C846
+:102CB0000202011C00000002020201C80000000024
+:102CC000020201D000000000020201D80000000250
+:102CD000020201E000000002020201E8000000FF21
+:102CE000020201F0000000FF0202010400000000E7
+:102CF00002020108000000C80202011800000002E0
+:102D0000020201C400000000020201CC0000000029
+:102D1000020201D400000002020201DC00000002F5
+:102D2000020201E4000000FF020201EC000000FFCB
+:102D300002020100000000000202010C000000C8B5
+:102D40000202011C00000002020201C80000000093
+:102D5000020201D000000000020201D800000002BF
+:102D6000020201E000000002020201E8000000FF90
+:102D7000020201F0000000FF020201040000000056
+:102D80000728040000C00000082807A8000B03491A
+:102D9000072C000032FC0000072C800035790CC0A5
+:102DA000072D00003AC11A1F072D800039EF28D0E7
+:102DB000072E00001C3E374C082E3710391E034BDF
+:102DC00001280000000000000128000400000000AD
+:102DD00001280008000000000128000C000000008D
+:102DE000012800100000000001280014000000006D
+:102DF0000228002000000001022800240000000238
+:102E000002280028000000030228002C0000000017
+:102E100002280030000000040228003400000001F5
+:102E200002280038000000000228003C00000001D9
+:102E300002280040000000040228004400000000B6
+:102E400002280048000000010228004C0000000396
+:102E50000228005000000000022800540000000179
+:102E600002280058000000040228005C0000000056
+:102E70000228006000000001022800640000000336
+:102E800002280068000000000228006C0000000119
+:102E900002280070000000040228007400000000F6
+:102EA00002280078000000040228007C00000003D3
+:102EB0000628008000000002022800A400003FFF56
+:102EC000022800A8000003FF0228022400000000DE
+:102ED00002280234000000000228024C000000001A
+:102EE000022802E40000FFFF06282000000008007E
+:102EF000022B8BC000000001022B800000000000AC
+:102F0000022B804000000018022B80800000000C83
+:102F1000022B80C0000000660C2B83000007A1205C
+:102F20000A2B8300000001380B2B8300000013885C
+:102F3000022B83C0000001F40C2B8340000001F43D
+:102F40000A2B8340000000000B2B8340000000058B
+:102F50000A2B83800004C4B40C2B83801DCD650034
+:102F60000A2B1480000000000B2B8380004C4B4088
+:102F7000022B148000000001062A29C8000000046A
+:102F8000042A29D80002034D062A208000000048A8
+:102F9000062A9020000000C8062A900000000002C7
+:102FA000062A21A800000086062A20000000002032
+:102FB000022A23C800000000042A23D00002034F85
+:102FC000042A249800040351022A2C500000000017
+:102FD000022A2C1000000000042A2C0800020355CD
+:102FE000042A300000020357062A300800000100BE
+:102FF000062A404000000010042A40000010035937
+:10300000062A6AC000000002062A6B0000000004C5
+:10301000042A840800020369022B08000000000053
+:10302000042B0C000010036B022B080001000000B1
+:10303000042B0C400008037B022B08000200000058
+:10304000042B0C6000080383062AC000000000D88F
+:10305000062A24A800000014062A254800000022A1
+:10306000042A25D00002038B062A266800000022CD
+:10307000042A26F00002038D062A27880000002279
+:10308000042A28100002038F062A28A80000002224
+:10309000042A293000020391062AA000000000281B
+:1030A000062AA1400000000C042A29E00002039334
+:1030B000062A502000000002062A503000000002BC
+:1030C000062A500000000002062A501000000002EC
+:1030D000022A520800000001042A6AC8000203956F
+:1030E000062A6B1000000042062A6D200000000432
+:1030F000062ABCD000000002062AC360000000D8E7
+:10310000062A24F800000014062A25D80000002210
+:10311000042A266000020397062A26F800000022EF
+:10312000042A278000020399062A2818000000229A
+:10313000042A28A00002039B062A29380000002246
+:10314000042A29C00002039D062AA0A0000000282E
+:10315000062AA1700000000C042A29E80002039F3F
+:10316000062A502800000002062A503800000002FB
+:10317000062A500800000002062A5018000000022B
+:10318000022A520C00000001042A6AD0000203A1A6
+:10319000062A6C1800000042062A6D300000000468
+:1031A000062ABCD800000002022AC6C000000000A7
+:1031B000042A29F0001003A3062A50480000000E3C
+:1031C000062AB00000000006022AC6C40000000063
+:1031D000042A2A30001003B3062A50800000000E93
+:1031E000062AB01800000006022AC6C80000000027
+:1031F000042A2A70001003C3062A50B80000000EEB
+:10320000062AB03000000006022AC6CC00000000EA
+:10321000042A2AB0001003D3062A50F00000000E42
+:10322000062AB04800000006022AC6D000000000AE
+:10323000042A2AF0001003E3062A51280000000E99
+:10324000062AB06000000006022AC6D40000000072
+:10325000042A2B30001003F3062A51600000000EF0
+:10326000062AB07800000006022AC6D80000000036
+:10327000042A2B7000100403062A51980000000E47
+:10328000062AB09000000006022AC6DC00000000FA
+:10329000042A2BB000100413062A51D00000000E9F
+:1032A000062AB0A800000006021010080000000165
+:1032B0000210105000000001021010000003D000A6
+:1032C000021010040000003D091018000200042341
+:1032D0000910110000280623061011A00000001894
+:1032E00006102400000000E00210201C0000000076
+:1032F0000210202000000001021020C00000000287
+:10330000021020040000000102102008000000014B
+:1033100009103C000005064B091038000005065056
+:10332000091038200005065506104C000000010069
+:1033300002104028000000100210404400003FFF2F
+:103340000210405800280000021040840084924A75
+:1033500002104058000000000210800000001080A1
+:10336000021080AC00000000021080380000001045
+:103370000210810000000000061081200000000201
+:1033800002108008000002B502108010000000004A
+:10339000061082000000004A021081080001FFFFB1
+:1033A00006108140000000020210800000001A8018
+:1033B0000610900000000024061091200000004A32
+:1033C000061093700000004A061095C00000004AE5
+:1033D0000210800400001080021080B00000000184
+:1033E0000210803C00000010021081040000000068
+:1033F00006108128000000020210800C000002B5B7
+:103400000210801400000000061084000000004A32
+:103410000210810C0001FFFF06108148000000022D
+:103420000210800400001A80061090900000002412
+:10343000061092480000004A061094980000004AC6
+:10344000061096E80000004A02108000000010807C
+:10345000021080AC00000002021080380000001052
+:103460000210810000000000061081200000000210
+:1034700002108008000002B5021080100000000059
+:10348000061082000000004A021081080001FFFFC0
+:1034900006108140000000020210800000001A8027
+:1034A0000610900000000024061091200000004A41
+:1034B000061093700000004A061095C00000004AF4
+:1034C0000210800400001080021080B00000000391
+:1034D0000210803C00000010021081040000000077
+:1034E00006108128000000020210800C000002B5C6
+:1034F0000210801400000000061084000000004A42
+:103500000210810C0001FFFF06108148000000023C
+:103510000210800400001A80061090900000002421
+:10352000061092480000004A061094980000004AD5
+:10353000061096E80000004A02108000000010808B
+:10354000021080AC0000000402108038000000105F
+:10355000021081000000000006108120000000021F
+:1035600002108008000002B5021080100000000068
+:10357000061082000000004A021081080001FFFFCF
+:1035800006108140000000020210800000001A8036
+:103590000610900000000024061091200000004A50
+:1035A000061093700000004A061095C00000004A03
+:1035B0000210800400001080021080B0000000059E
+:1035C0000210803C00000010021081040000000086
+:1035D00006108128000000020210800C000002B5D5
+:1035E0000210801400000000061084000000004A51
+:1035F0000210810C0001FFFF06108148000000024C
+:103600000210800400001A80061090900000002430
+:10361000061092480000004A061094980000004AE4
+:10362000061096E80000004A02108000000010809A
+:10363000021080AC0000000602108038000000106C
+:10364000021081000000000006108120000000022E
+:1036500002108008000002B5021080100000000077
+:10366000061082000000004A021081080001FFFFDE
+:1036700006108140000000020210800000001A8045
+:103680000610900000000024061091200000004A5F
+:10369000061093700000004A061095C00000004A12
+:1036A0000210800400001080021080B000000007AB
+:1036B0000210803C00000010021081040000000095
+:1036C00006108128000000020210800C000002B5E4
+:1036D0000210801400000000061084000000004A60
+:1036E0000210810C0001FFFF06108148000000025B
+:1036F0000210800400001A80061090900000002440
+:10370000061092480000004A061094980000004AF3
+:10371000061096E80000004A021205B00000000101
+:103720000212049000E383400212051400003C10D2
+:103730000212066C00000001021206700000000078
+:1037400002120494FFFFFFFF02120498FFFFFFFF25
+:103750000212049CFFFFFFFF021204A0FFFFFFFF05
+:10376000021204A4FFFFFFFF021204A8FFFFFFFFE5
+:10377000021204ACFFFFFFFF021204B0FFFFFFFFC5
+:10378000021204BCFFFFFFFF021204C0FFFFFFFF95
+:10379000021204C4FFFFFFFF021204C8FFFFFFFF75
+:1037A000021204CCFFFFFFFF021204D0FFFFFFFF55
+:1037B000021204D8FFFFFFFF021204DCFFFFFFFF2D
+:1037C000021204E0FFFFFFFF021204E4FFFFFFFF0D
+:1037D000021204E8FFFFFFFF021204ECFFFFFFFFED
+:1037E000021204F0FFFFFFFF021204F4FFFFFFFFCD
+:1037F000021204F8FFFFFFFF021204FCFFFFFFFFAD
+:1038000002120500FFFFFFFF02120504FFFFFFFF8A
+:1038100002120508FFFFFFFF0212050CFFFFFFFF6A
+:1038200002120510FFFFFFFF021204D4FF802000E8
+:10383000021204B4F0005000021204B8F0001000AC
+:1038400002120390000000080212039C000000080E
+:10385000021203A000000008021203A400000002EC
+:10386000021203BC00000004021203C000000005A5
+:10387000021203C400000004021203D00000000082
+:103880000212036C00000001021203680000003FF6
+:10389000021201BC00000040021201C00000180822
+:1038A000021201C400000803021201C8000008034C
+:1038B000021201CC00000040021201D000000003FF
+:1038C000021201D400000803021201D8000008030C
+:1038D000021201DC00000803021201E000010003F3
+:1038E000021201E400000803021201E800000803CC
+:1038F000021201EC00000003021201F000000003BC
+:10390000021201F400000003021201F8000000039B
+:10391000021201FC0000000302120200000000037A
+:103920000212020400000003021202080000000359
+:103930000212020C00000003021202100000000339
+:103940000212021400000003021202180000000319
+:103950000212021C000000030212022000000003F9
+:1039600002120224000000030212022800002403B5
+:103970000212022C0000002F021202300000000987
+:103980000212023400000019021202380000018401
+:103990000212023C000001830212024000000306F2
+:1039A0000212024400000019021202480000000640
+:1039B0000212024C0000030602120250000003062D
+:1039C00002120254000003060212025800000C8684
+:1039D0000212025C000003060212026000000306ED
+:1039E00002120264000000060212026800000006D3
+:1039F0000212026C000000060212027000000006B3
+:103A00000212027400000006021202780000000692
+:103A10000212027C00000006021202800000000672
+:103A20000212028400000006021202880000000652
+:103A30000212028C00000006021202900000000632
+:103A40000212029400000006021202980000000612
+:103A50000212029C00000006021202A000000306EF
+:103A6000021202A400000013021202A800000006C5
+:103A7000021202B000001004021202B4000010048E
+:103A80000212032400106440021203280010644054
+:103A9000021205B400000001021201B00000000192
+:103AA0000600A000000000160200A0EC5554000023
+:103AB0000200A0F0555555550200A0F400005555E0
+:103AC0000200A0F8F00000000200A0FC5554000025
+:103AD0000200A100555555550200A104000055559E
+:103AE0000200A108F00000000200A18C5554000063
+:103AF0000200A190555555550200A194000055555E
+:103B00000200A198F00000000200A19C000000004B
+:103B10000200A1A0000100000200A1A400005014B6
+:103B20000200A1A8000000000200A45C00000C003C
+:103B30000200A61C000000030200A06CFF5C000055
+:103B40000200A070FFF55FFF0200A0740000FFFFFD
+:103B50000200A078F00003E00200A07C000000005A
+:103B60000200A0800000A0000600A0840000000564
+:103B70000200A0980FE000000600A09C00000007D3
+:103B80000200A0B8000004000600A0BC0000000372
+:103B90000200A0C8000010000600A0CC0000000336
+:103BA0000200A0D8000040000600A0DC00000003D6
+:103BB0000200A0E8000100000600A22C00000004A2
+:103BC0000200A10CFF5C00000200A110FFF55FFFE6
+:103BD0000200A1140000FFFF0200A118F00003E0A2
+:103BE0000200A11C000000000200A1200000A000B3
+:103BF0000600A124000000050200A1380FE000002B
+:103C00000600A13C000000070200A15800000800C7
+:103C10000600A15C000000030200A1680000200073
+:103C20000600A16C000000030200A17800008000E3
+:103C30000600A17C000000030200A1880002000031
+:103C40000600A23C0000000400000000000000008C
+:103C50000000003100000000000000000000000033
+:103C60000000000000000000000000000000000054
+:103C700000000000000000000000000000310032E1
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA000000000000000000000320056000000008C
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000000000000056008C000000000000000002
+:103CE000008C009000900094009400980098009C34
+:103CF000009C00A000A000A400A400A800A800ACA4
+:103D000000AC00B100B100B300B300B5000000008A
+:103D100000000000000000000000000000000000A3
+:103D200000000000000000000000000000B50102DB
+:103D30000102010A010A01120112011B011B0124E7
+:103D40000124012D012D01360136013F013F0148BB
+:103D5000014801510151015A00000000000000001B
+:103D60000000000000000000000000000000000053
+:103D70000000000000000000000000000000000043
+:103D80000000000000000000000000000000000033
+:103D90000000000000000000000000000000000023
+:103DA0000000000000000000000000000000000013
+:103DB0000000000000000000000000000000000003
+:103DC00000000000000000000000000000000000F3
+:103DD00000000000000000000000000000000000E3
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E00000000000000000000015A015F00000000F7
+:103E100000000000015F0160016001610161016259
+:103E2000016201630163016401640165016501666A
+:103E300001660167000000000000000000000000B3
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E60000167016C016C0179017901860000000095
+:103E70000000000000000000000000000000000042
+:103E80000000000000000000000000000000000032
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB00000000000000000000186018700000000F3
+:103EC00000000000000000000000000000000000F2
+:103ED00000000000000000000000000000000000E2
+:103EE00000000000018701BE00000000000000008B
+:103EF00000000000000000000000000000000000C2
+:103F000000000000000000000000000000000000B1
+:103F100001BE01E9000000000000000000000000F8
+:103F20000000000000000000000000000000000091
+:103F300000000000000000000000000001E9021A7B
+:103F40000000000000000000021A022102210228E5
+:103F50000228022F022F02360236023D023D0244A1
+:103F60000244024B024B02520252028A000000003D
+:103F700000000000028A028E028E029202920296D5
+:103F80000296029A029A029E029E02A202A202A631
+:103F900002A602AA02AA02FA02FA031103110328D6
+:103FA0000328032B032B032E032E03310331033489
+:103FB000033403370337033A033A033D033D034019
+:103FC00003400381038103880388038F038F0393D6
+:103FD000039303970397039B039B039F039F03A3F1
+:103FE00003A303A703A703AB03AB03AF03AF03B064
+:103FF00000000000000000000000000000000000C1
+:1040000000000000000000000000000000000000B0
+:10401000000000000000000003B003C20000000028
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:104040000000000003C203D703D703DA03DA03DD5D
+:104050000000000000000000000000000000000060
+:104060000000000000000000000000000000000050
+:1040700003DD040A00000000000000000000000052
+:104080000000000000000000000000000000000030
+:10409000000000000000000000000000040A050D00
+:1040A0000000000000000000000000000000000010
+:1040B0000000000000000000000000000000000000
+:1040C0000000000000000000050D0514051405188F
+:1040D0000518051C000000000000000000000000A2
+:1040E00000000000000000000000000000000000D0
+:1040F00000000000051C055C00000000000000003E
+:10410000055C05650565056E056E05770577058017
+:1041100005800589058905920592059B059B05A4E7
+:1041200005A405FD05FD0613061306290629062D1F
+:10413000062D063106310635063506390639063DA7
+:10414000063D064106410645064506490649065014
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:10417000000000000000000006500656000000008D
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A0000000000006560659000000000000000054
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000000000000EF
+:1041D0000659065F0000000000000000000000001B
+:1041E00000000000000000000000000000000000CF
+:1041F00000000000000000000000000000000000BF
+:104200000000000000000000065F066E066E067DDE
+:10421000067D068C068C069B069B06AA06AA06B996
+:1042200006B906C806C806D706D70748000000002A
+:10423000000000000000000000000000000000007E
+:10424000000000000000000000000000000000006E
+:10425000000000000748075B075B076C076C077DE1
+:10426000000000000000000000000000000000004E
+:10427000000000000000000000000000000000003E
+:10428000000000000000000000000000000000002E
+:10429000000000000000000000000000000000001E
+:1042A000000000000000000000000000000000000E
+:1042B00000000000000000000000000000000000FE
+:1042C00000000000000000000000000000000000EE
+:1042D00000000000000000000000000000000000DE
+:1042E00000010000000204C00003098000040E4029
+:1042F00000051300000617C000071C8000082140BD
+:1043000000092600000A2AC0000B2F80000C344050
+:10431000000D3900000E3DC0000F428000104740E4
+:1043200000114C00001250C00013558000145A4078
+:1043300000155F00001663C00017688000186D400C
+:1043400000197200001A76C0001B7B80001C8040A0
+:10435000001D8500001E89C0001F8E800020934034
+:10436000000020000000400000006000000080000D
+:104370000000A0000000C0000000E00000010000FC
+:1043800000012000000140000001600000018000E9
+:104390000001A0000001C0000001E00000020000D8
+:1043A00000022000000240000002600000028000C5
+:1043B0000002A0000002C0000002E00000030000B4
+:1043C00000032000000340000003600000038000A1
+:1043D0000003A0000003C0000003E0000004000090
+:1043E000000420000004400000046000000480007D
+:1043F0000004A0000004C0000004E000000500006C
+:104400000005200000054000000560000005800058
+:104410000005A0000005C0000005E0000006000047
+:104420000006200000064000000660000006800034
+:104430000006A0000006C0000006E0000007000023
+:104440000007200000074000000760000007800010
+:104450000007A0000007C0000007E00000080000FF
+:1044600000082000000840000008600000088000EC
+:104470000008A0000008C0000008E00000090000DB
+:1044800000092000000940000009600000098000C8
+:104490000009A0000009C0000009E000000A0000B7
+:1044A000000A2000000A4000000A6000000A8000A4
+:1044B000000AA000000AC000000AE000000B000093
+:1044C000000B2000000B4000000B6000000B800080
+:1044D000000BA000000BC000000BE000000C00006F
+:1044E000000C2000000C4000000C6000000C80005C
+:1044F000000CA000000CC000000CE000000D00004B
+:10450000000D2000000D4000000D6000000D800037
+:10451000000DA000000DC000000DE000000E000026
+:10452000000E2000000E4000000E6000000E800013
+:10453000000EA000000EC000000EE000000F000002
+:10454000000F2000000F4000000F6000000F8000EF
+:10455000000FA000000FC000000FE00000100000DE
+:1045600000102000001040000010600000108000CB
+:104570000010A0000010C0000010E00000110000BA
+:1045800000112000001140000011600000118000A7
+:104590000011A0000011C0000011E0000012000096
+:1045A0000012200000124000001260000012800083
+:1045B0000012A0000012C0000012E0000013000072
+:1045C000001320000013400000136000001380005F
+:1045D0000013A0000013C0000013E000001400004E
+:1045E000001420000014400000146000001480003B
+:1045F0000014A0000014C0000014E000001500002A
+:104600000015200000154000001560000015800016
+:104610000015A0000015C0000015E0000016000005
+:1046200000162000001640000016600000168000F2
+:104630000016A0000016C0000016E00000170000E1
+:1046400000172000001740000017600000178000CE
+:104650000017A0000017C0000017E00000180000BD
+:1046600000182000001840000018600000188000AA
+:104670000018A0000018C0000018E0000019000099
+:104680000019200000194000001960000019800086
+:104690000019A0000019C0000019E000001A000075
+:1046A000001A2000001A4000001A6000001A800062
+:1046B000001AA000001AC000001AE000001B000051
+:1046C000001B2000001B4000001B6000001B80003E
+:1046D000001BA000001BC000001BE000001C00002D
+:1046E000001C2000001C4000001C6000001C80001A
+:1046F000001CA000001CC000001CE000001D000009
+:10470000001D2000001D4000001D6000001D8000F5
+:10471000001DA000001DC000001DE000001E0000E4
+:10472000001E2000001E4000001E6000001E8000D1
+:10473000001EA000001EC000001EE000001F0000C0
+:10474000001F2000001F4000001F6000001F8000AD
+:10475000001FA000001FC000001FE000002000009C
+:104760000020200000204000002060000020800089
+:104770000020A0000020C0000020E0000021000078
+:104780000021200000214000002160000021800065
+:104790000021A0000021C0000021E0000022000054
+:1047A0000022200000224000002260000022800041
+:1047B0000022A0000022C0000022E0000023000030
+:1047C000002320000023400000236000002380001D
+:1047D0000023A0000023C0000023E000002400000C
+:1047E00000242000002440000024600000248000F9
+:1047F0000024A0000024C0000024E00000250000E8
+:1048000000252000002540000025600000258000D4
+:104810000025A0000025C0000025E00000260000C3
+:1048200000262000002640000026600000268000B0
+:104830000026A0000026C0000026E000002700009F
+:10484000002720000027400000276000002780008C
+:104850000027A0000027C0000027E000002800007B
+:104860000028200000284000002860000028800068
+:104870000028A0000028C0000028E0000029000057
+:104880000029200000294000002960000029800044
+:104890000029A0000029C0000029E000002A000033
+:1048A000002A2000002A4000002A6000002A800020
+:1048B000002AA000002AC000002AE000002B00000F
+:1048C000002B2000002B4000002B6000002B8000FC
+:1048D000002BA000002BC000002BE000002C0000EB
+:1048E000002C2000002C4000002C6000002C8000D8
+:1048F000002CA000002CC000002CE000002D0000C7
+:10490000002D2000002D4000002D6000002D8000B3
+:10491000002DA000002DC000002DE000002E0000A2
+:10492000002E2000002E4000002E6000002E80008F
+:10493000002EA000002EC000002EE000002F00007E
+:10494000002F2000002F4000002F6000002F80006B
+:10495000002FA000002FC000002FE000003000005A
+:104960000030200000304000003060000030800047
+:104970000030A0000030C0000030E0000031000036
+:104980000031200000314000003160000031800023
+:104990000031A0000031C0000031E0000032000012
+:1049A00000322000003240000032600000328000FF
+:1049B0000032A0000032C0000032E00000330000EE
+:1049C00000332000003340000033600000338000DB
+:1049D0000033A0000033C0000033E00000340000CA
+:1049E00000342000003440000034600000348000B7
+:1049F0000034A0000034C0000034E00000350000A6
+:104A00000035200000354000003560000035800092
+:104A10000035A0000035C0000035E0000036000081
+:104A2000003620000036400000366000003680006E
+:104A30000036A0000036C0000036E000003700005D
+:104A4000003720000037400000376000003780004A
+:104A50000037A0000037C0000037E0000038000039
+:104A60000038200000384000003860000038800026
+:104A70000038A0000038C0000038E0000039000015
+:104A80000039200000394000003960000039800002
+:104A90000039A0000039C0000039E000003A0000F1
+:104AA000003A2000003A4000003A6000003A8000DE
+:104AB000003AA000003AC000003AE000003B0000CD
+:104AC000003B2000003B4000003B6000003B8000BA
+:104AD000003BA000003BC000003BE000003C0000A9
+:104AE000003C2000003C4000003C6000003C800096
+:104AF000003CA000003CC000003CE000003D000085
+:104B0000003D2000003D4000003D6000003D800071
+:104B1000003DA000003DC000003DE000003E000060
+:104B2000003E2000003E4000003E6000003E80004D
+:104B3000003EA000003EC000003EE000003F00003C
+:104B4000003F2000003F4000003F6000003F800029
+:104B5000003FA000003FC000003FE000003FE00138
+:104B600000000000000001FF0000020000007FF8CC
+:104B700000007FF800000CDF0000150000000001BD
+:104B80000000000100000001FFFFFFFFFFFFFFFF2B
+:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:104BD000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:104BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
+:104BF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:104C0000FFFFFFFFFFFFFFFFFFFFFFFF00000000B0
+:104C1000FFFFFFFF00000000FFFFFFFFFFFFFFFFA0
+:104C200000000000FFFFFFFF00000000FFFFFFFF8C
+:104C3000FFFFFFFF00000000FFFFFFFF000000007C
+:104C4000FFFFFFFF0000000300BEBC20FFFFFFFFCF
+:104C500000000000FFFFFFFF00000000FFFFFFFF5C
+:104C60000000000300BEBC20FFFFFFFF00000000AB
+:104C7000FFFFFFFF00000000FFFFFFFF0000000339
+:104C800000BEBC20FFFFFFFF00000000FFFFFFFF92
+:104C900000000000FFFFFFFF0000000300BEBC207B
+:104CA000FFFFFFFF00000000FFFFFFFF000000000C
+:104CB000FFFFFFFF0000000300BEBC20FFFFFFFF5F
+:104CC00000000000FFFFFFFF00000000FFFFFFFFEC
+:104CD0000000000300BEBC2000002000000040C017
+:104CE00000006180000082400000A3000000C3C0FB
+:104CF0000000E4800001054000012600000146C0DC
+:104D000000016780000188400001A9000001C9C0BE
+:104D10000001EA8000020B4000022C0000024CC09F
+:104D200000026D8000028E400002AF000002CFC082
+:104D30000002F0800003114000033200000352C063
+:104D400000037380000394400003B5000003D5C046
+:104D50000003F6800004174000043800000458C027
+:104D60000004798000049A40000080000001038064
+:104D70000001870000020A8000028E0000031180FB
+:104D8000000395000004188000049C0000051F80AB
+:104D90000005A300000626800006AA0000072D805B
+:104DA0000007B100000834800008B80000093B800B
+:104DB0000009BF00000A4280000AC600000B4980BB
+:104DC000000BCD00000C5080000CD400000D57806B
+:104DD000000DDB0000007FF800007FF80000193EA6
+:104DE0000000350000001900001000000000000065
+:104DF00000000000FFFFFFFF400000004000000037
+:104E000040000000400000004000000040000000A2
+:104E10004000000040000000400000004000000092
+:104E20004000000040000000400000004000000082
+:104E30004000000040000000400000004000000072
+:104E40004000000040000000400000004000000062
+:104E50004000000040000000400000004000000052
+:104E60004000000040000000400000004000000042
+:104E7000400000004000000000007FF800007FF8C4
+:104E8000000005C700001500FFFFFFFFFFFFFFFF49
+:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:104ED000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:104EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
+:104EF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:104F0000FFFFFFFFFFFFFFFF400000004000000029
+:104F10004000000040000000400000004000000091
+:104F20004000000040000000400000004000000081
+:104F30004000000040000000400000004000000071
+:104F40004000000040000000400000004000000061
+:104F50004000000040000000400000004000000051
+:104F60004000000040000000400000004000000041
+:104F70004000000040000000400000004000000031
+:104F800040000000400000000000100000002080F1
+:104F900000003100000041800000520000006280EB
+:104FA0000000730000008380000094000000A480D3
+:104FB0000000B5000000C5800000D6000000E680BB
+:104FC0000000F700000107800001180000012880A0
+:104FD000000139000001498000015A0000016A8087
+:104FE00000017B0000018B8000019C000001AC806F
+:104FF0000001BD000001CD800001DE000001EE8057
+:105000000001FF0000007FF800007FF80000112E73
+:105010000000350010000000000028AD0000000076
+:105020000001000100070205CCCCCCC5FFFFFFFF4B
+:10503000FFFFFFFF7058103C000000000000000060
+:1050400000000001CCCC0201CCCCCCCCCCCC0201F9
+:10505000CCCCCCCCCCCC0201CCCCCCCCCCCC0201BA
+:10506000CCCCCCCCCCCC0201CCCCCCCCCCCC0201AA
+:10507000CCCCCCCCCCCC0201CCCCCCCCCCCC02019A
+:10508000CCCCCCCC00000000FFFFFFFF40000000B4
+:105090004000000040000000400000004000000010
+:1050A0004000000040000000400000004000000000
+:1050B00040000000400000004000000040000000F0
+:1050C00040000000400000004000000040000000E0
+:1050D00040000000400000004000000040000000D0
+:1050E00040000000400000004000000040000000C0
+:1050F00040000000400000004000000040000000B0
+:10510000400000004000000040000000002625A0F4
+:1051100000000000002625A000000000002625A0B9
+:1051200000000000002625A000000000000E023252
+:10513000011600D60010000000000000002625A087
+:1051400000000000002625A000000000002625A089
+:1051500000000000002625A00000000000720236BA
+:10516000012300F300100000000000000000FFFF1A
+:10517000000000000000FFFF000000000000FFFF33
+:10518000000000000000FFFF000000000000FFFF23
+:10519000000000000000FFFF000000000000FFFF13
+:1051A000000000000000FFFF000000000000FFFF03
+:1051B000000000000000FFFF000000000000FFFFF3
+:1051C000000000000000FFFF000000000000FFFFE3
+:1051D000000000000000FFFF000000000000FFFFD3
+:1051E000000000000000FFFF000000000000FFFFC3
+:1051F000000000000000FFFF000000000000FFFFB3
+:10520000000000000000FFFF000000000000FFFFA2
+:10521000000000000000FFFF000000000000FFFF92
+:10522000000000000000FFFF000000000000FFFF82
+:10523000000000000000FFFF000000000000FFFF72
+:10524000000000000000FFFF000000000000FFFF62
+:10525000000000000000FFFF000000000000FFFF52
+:10526000000000000000FFFF000000000000FFFF42
+:10527000000000000000FFFF000000000000FFFF32
+:10528000000000000000FFFF000000000000FFFF22
+:10529000000000000000FFFF000000000000FFFF12
+:1052A000000000000000FFFF000000000000FFFF02
+:1052B000000000000000FFFF000000000000FFFFF2
+:1052C000000000000000FFFF000000000000FFFFE2
+:1052D000000000000000FFFF000000000000FFFFD2
+:1052E000000000000000FFFF000000000000FFFFC2
+:1052F000000000000000FFFF000000000000FFFFB2
+:10530000000000000000FFFF000000000000FFFFA1
+:10531000000000000000FFFF000000000000FFFF91
+:10532000000000000000FFFF000000000000FFFF81
+:10533000000000000000FFFF000000000000FFFF71
+:10534000000000000000FFFF000000000000FFFF61
+:10535000000000000000FFFF000000000000FFFF51
+:10536000000000000000FFFF00000000FFFFFFF34F
+:10537000318FFFFF0C30C30CC30C30C3CF3CF300A4
+:10538000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FF
+:1053900030EFFFFF0C30C30CC30C30C3CF3CF30025
+:1053A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D9
+:1053B000305FFFFF0C30C30CC30C30C3CF3CF30095
+:1053C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B3
+:1053D0001CBFFFFF0C30C305C30C30C3CF3000141B
+:1053E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF29A
+:1053F000304FFFFF0C30C30CC30C30C3CF3CF30065
+:10540000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6D
+:10541000302FFFFF0C30C30CC30C30C3CF3CF30064
+:10542000F3CF3CF30010CF3CCDCDCDCDFFFFFFF748
+:1054300031EFFFFF0C30C30CC30C30C3CF3CF30083
+:10544000F3CF3CF30020CF3CCDCDCDCDFFFFFFF51A
+:10545000302FFFFF0C30C30CC30C30C3CF3CF30024
+:10546000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DC
+:10547000318FFFFF0C30C30CC30C30C3CF3CF300A3
+:10548000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FE
+:10549000310FFFFF0C30C30CC30C30C3CF3CF30003
+:1054A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D8
+:1054B000305FFFFF0C30C30CC30C30C3CF3CF30094
+:1054C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B2
+:1054D0001CBFFFFF0C30C305C30C30C3CF3000141A
+:1054E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF299
+:1054F000304FFFFF0C30C30CC30C30C3CF3CF30064
+:10550000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6C
+:10551000302FFFFF0C30C30CC30C30C3CF3CF30063
+:10552000F3CF3CF30010CF3CCDCDCDCDFFFFFFF747
+:1055300030EFFFFF0C30C30CC30C30C3CF3CF30083
+:10554000F3CF3CF30020CF3CCDCDCDCDFFFFFFF519
+:10555000304FFFFF0C30C30CC30C30C3CF3CF30003
+:10556000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DB
+:1055700031EFFFFF0C30C30CC30C30C3CF3CF30042
+:10558000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FD
+:10559000310FFFFF0C30C30CC30C30C3CF3CF30002
+:1055A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D7
+:1055B000305FFFFF0C30C30CC30C30C3CF3CF30093
+:1055C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B1
+:1055D0001CBFFFFF0C30C305C30C30C3CF30001419
+:1055E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF298
+:1055F000304FFFFF0C30C30CC30C30C3CF3CF30063
+:10560000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6B
+:10561000302FFFFF0C30C30CC30C30C3CF3CF30062
+:10562000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A6
+:10563000056FFFFF0C30C30CC30C30C3CF3CC00060
+:10564000F3CF3CF30020CF3CCDCDCDCDFFFFFFF518
+:10565000310FFFFF0C30C30CC30C30C3CF3CF30041
+:10566000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DA
+:10567000320FFFFF0C30C30CC30C30C3CF3CF30020
+:10568000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FC
+:10569000310FFFFF0C30C30CC30C30C3CF3CF30001
+:1056A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D6
+:1056B000305FFFFF0C30C30CC30C30C3CF3CF30092
+:1056C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B0
+:1056D0001CBFFFFF0C30C305C30C30C3CF30001418
+:1056E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF297
+:1056F000304FFFFF0C30C30CC30C30C3CF3CF30062
+:10570000F3CF3CF30008CF3CCDCDCDCDFFFFFF8ADA
+:10571000042FFFFF0C30C30CC30C30C3CF3CC000C0
+:10572000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A5
+:1057300005CFFFFF0C30C30CC30C30C3CF3CC000FF
+:10574000F3CF3CF30020CF3CCDCDCDCDFFFFFFF517
+:10575000310FFFFF0C30C30CC30C30C3CF3CF30040
+:10576000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3D9
+:10577000316FFFFF0C30C30CC30C30C3CF3CF300C0
+:10578000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FB
+:10579000302FFFFF0C30C30CC30C30C3CF3CF300E1
+:1057A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D5
+:1057B000305FFFFF0C30C30CC30C30C3CF3CF30091
+:1057C000F3CF3CF30002CF3CCDCDCDCDFFFFFFF6B4
+:1057D00030BFFFFF0C30C30CC30C30C3CF3CF314FD
+:1057E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF296
+:1057F000304FFFFF0C30C30CC30C30C3CF3CF30061
+:10580000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA69
+:10581000302FFFFF0C30C30CC30C30C3CF3CF30060
+:10582000F3CF3CF30010CF3CCDCDCDCDFFFFFFF744
+:1058300031CFFFFF0C30C30CC30C30C3CF3CF3009F
+:10584000F3CF3CF30020CF3CCDCDCDCDFFFFFFF01B
+:10585000307FFFFF0C30C30CC30C30C3CF3CF300D0
+:10586000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCC
+:1058700030CFFFFF0C30C30CC30C30C3CF3CF3CC94
+:10588000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEC
+:1058900030CFFFFF0C30C30CC30C30C3CF3CF3CC74
+:1058A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCB
+:1058B00030CFFFFF0C30C30CC30C30C3CF3CF3CC54
+:1058C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFAA
+:1058D00030CFFFFF0C30C30CC30C30C3CF3CF3CC34
+:1058E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF88
+:1058F00030CFFFFF0C30C30CC30C30C3CF3CF3CC14
+:10590000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF63
+:1059100030CFFFFF0C30C30CC30C30C3CF3CF3CCF3
+:10592000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3B
+:1059300030CFFFFF0C30C30CC30C30C3CF3CF3CCD3
+:10594000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0B
+:1059500030CFFFFF0C30C30CC30C30C3CF3CF3CCB3
+:10596000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCB
+:1059700030CFFFFF0C30C30CC30C30C3CF3CF3CC93
+:10598000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEB
+:1059900030CFFFFF0C30C30CC30C30C3CF3CF3CC73
+:1059A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCA
+:1059B00030CFFFFF0C30C30CC30C30C3CF3CF3CC53
+:1059C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA9
+:1059D00030CFFFFF0C30C30CC30C30C3CF3CF3CC33
+:1059E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF87
+:1059F00030CFFFFF0C30C30CC30C30C3CF3CF3CC13
+:105A0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF62
+:105A100030CFFFFF0C30C30CC30C30C3CF3CF3CCF2
+:105A2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3A
+:105A300030CFFFFF0C30C30CC30C30C3CF3CF3CCD2
+:105A4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0A
+:105A500030CFFFFF0C30C30CC30C30C3CF3CF3CCB2
+:105A6000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCA
+:105A700030CFFFFF0C30C30CC30C30C3CF3CF3CC92
+:105A8000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEA
+:105A900030CFFFFF0C30C30CC30C30C3CF3CF3CC72
+:105AA000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFC9
+:105AB00030CFFFFF0C30C30CC30C30C3CF3CF3CC52
+:105AC000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA8
+:105AD00030CFFFFF0C30C30CC30C30C3CF3CF3CC32
+:105AE000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF86
+:105AF00030CFFFFF0C30C30CC30C30C3CF3CF3CC12
+:105B0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF61
+:105B100030CFFFFF0C30C30CC30C30C3CF3CF3CCF1
+:105B2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF39
+:105B300030CFFFFF0C30C30CC30C30C3CF3CF3CCD1
+:105B4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF09
+:105B500030CFFFFF0C30C30CC30C30C3CF3CF3CCB1
+:105B6000F3CF3CF30040CF3CCDCDCDCD000C0000B9
+:105B7000000700C000028130000B815800020210B3
+:105B800000010230000F024000010330000C000051
+:105B9000000800C000028140000B81680002022062
+:105BA0000001024000070250000202C0000F000086
+:105BB000000800F000028170000B81980002025082
+:105BC00000010270000B8280000803380010000002
+:105BD0000008010000028180000B81A80002026021
+:105BE00000018280000E829800080380000B0000F4
+:105BF000000100B0000280C0000580E80002014002
+:105C000000010160000E017000038250CCCCCCCCAE
+:105C1000CCCCCCCCCCCCCCCCCCCCCCCC00002000D4
+:105C2000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCB4
+:105C300000002000CCCCCCCCCCCCCCCCCCCCCCCCB4
+:105C4000CCCCCCCC04002000000000000000000000
+:105C50001F8B080000000000000BFB51CFC0F003B9
+:105C60008A59051918AC84117C7A607E4ECAF43BBF
+:105C7000F232303803B12B103700F1616E06862303
+:105C8000DCC4EBBF2C8F6087CA32303402F11E694E
+:105C900006063B3984B8B90203C30A203F0B2AF633
+:105CA0001E4897CA53E6EEC182B55531C5349411EA
+:105CB0006C1D2CF2C858174DBE5D1995AF4740FFBB
+:105CC00040E32C1D54FE742D08FD4D1B4267A3C9F3
+:105CD000CF80CAFB40FD95A383DD5C5F22FD9DCA9A
+:105CE00082CA8F47E3B731A2F2CD3850F94950F557
+:105CF00000CDA28F7AC80300000000000000000061
+:105D00001F8B080000000000000BED7D0D7854D5BE
+:105D1000B5E83A73CEFC25672693908409093009CB
+:105D200021441B700C3F0D16EB097F8636D70E14ED
+:105D3000696C150744881048A4D6874FFD3291003E
+:105D4000E17F504B43413CFC29BD97B691A2A596FB
+:105D5000D2019F165BDFF782CF7AB5B5BD23A5F8D8
+:105D6000539498774BEDBBDEFAF65A7B9FCC3927DC
+:105D7000332448BDED7BEFC6AF3DEC73F6CFFADBC5
+:105D80006BAFB5F6DA7B9C0E37148E04F818FF6EF5
+:105D900000F81715000A524FA70762D9D700E4E6AA
+:105DA0006BB16415C0D07C2D0113D8FB802BE49619
+:105DB00052ED8CE789DC9941ACD75EA00581F5D125
+:105DC0009E3B0FA2D857B411A01040F100FD19F569
+:105DD0009D81391EA8A2577FF9D8F82E03AC0994EB
+:105DE000E5603B7BFF003AC04473D90160F4C9DA37
+:105DF000790D78CBD98B7C80AC090EFDC652067725
+:105E0000B99EC0727688C1CDCA274A5FF08C62788D
+:105E10006CB8DE117653EBBB012601ACC4BE42EC7C
+:105E2000FDD884F8AE84B13C433ED4E662E5EC7222
+:105E3000A0FABEB1B1848BDA696A116B1700DE2E4D
+:105E400050B9B81EC601E468AE145CBC1EE19F2DBB
+:105E5000EA79CAADDFB361D307B21F4B4988F8585E
+:105E6000FF35EC7BA5E97BE5CCB7B0DF6C30B563E3
+:105E7000786CC37F14017C0E7CF9E7B0F3CFC26766
+:105E8000910E303D0F60727FFAA5E81623FE027076
+:105E9000BE78A1EF8FF8E0117CB8717AB2C1C1F081
+:105EA00056A73800F19E297FE4296374DC7C4A26DA
+:105EB0003A6C6E60FFC7BE6FAE73E8B152C2B3BE3C
+:105EC00088B51F29F0CC9BF8B2842C5AD7CACAEEE9
+:105ED000FE747687131ACA891A8E513F6EF66E08C1
+:105EE000932B77490FC9CDC81A464FA4CB031CEF9B
+:105EF00018FBEFE3B2143DDD063DA758E9E916F4BF
+:105F0000CCBBC74A47770DA3A31FBF5BE9A8E33FFC
+:105F100018BD1619742C80D144C7581ED177B0749F
+:105F2000CCB5D13160D031966C5050FE908E0CDEE5
+:105F3000AD9A03B259B9F735B72E23DD625A77907F
+:105F4000D5574563B586CBD16601D77AA4DF18FA59
+:105F5000E4700419BFAABA343E6F121296B3AB7440
+:105F600092772F23CB905294575552183D37563283
+:105F7000790D119C92A3A63F5CEC8FDA6F64F0A8B8
+:105F80002678367ABA3C122B6F63F0C624AC76388A
+:105F9000807269E0ED0E392CF45682593679E7703B
+:105FA0001AF06DD3F87C36C141EFA1BBAB436270F0
+:105FB0005E9CE1800DD2C0FD6EEDEBC7DABFBDDFA8
+:105FC00001E14B06BCE50CBF8B2FCAE10D8C3E1BDB
+:105FD000435D1D28E75BA7737CFBF3F90AC7EBE978
+:105FE000F1944F308D17EEF104D2EAB72B1C0772F3
+:105FF000AD78D504BC81AA2B1F07020B4622FF33C4
+:10600000F1E3AF067F88C16FA293B73C2061FFDE4A
+:10601000B10F7B80E6FD610FC2611FA71FBCB67187
+:10602000EDE32895314DA1924D1F057400937EA19B
+:106030003A217C727D921DB6EA196FA54DBF84ACE2
+:106040006545E81BC5A66F3EB0EBEB0983D4335A18
+:1060500023C11B12708198CFA3C47C9E762819F4AB
+:1060600030FA95EF32F4F5033FAF64F27040E8EB9D
+:10607000039D407AF64017D3D734AFB9BE1EC7414F
+:1060800083AA6FBEEC40FCF7F6E91B2B7DCAE2DA6F
+:1060900054D43BE5F1B003FB29DBC4F54D59478BE4
+:1060A00003F9344EE82D38CAE9E061FF99F5759996
+:1060B0001867D42E2B1DCB90BEAC5DD511DBFB1A1F
+:1060C000BEEE958189AE6CBCADF80F46AF6112A3F0
+:1060D000E367D8BF474305D171CA20D73D4147BBCD
+:1060E000BE2EC3B147313A3ECAF435C36F6480D384
+:1060F000B1BDC3010ED48FBB1CA41FC794461C584E
+:10610000CFD0DB0234A814F8EF13EB9D01E7A8070A
+:106110007A6A51B99743CF0937EB27771384132154
+:10612000D4D325B538CEE371AEA7CBE3E0889AECA3
+:10613000A15C01CFE3D37B5F1CC3EAF5C69530A217
+:10614000B91F420E4F698AAEC67A3B52C8E93F601A
+:106150002D931CDAF93852C8A59D3E6374ABFC96AA
+:106160003F6AE3C7266B79A44DAEEB0D7E18723DF6
+:10617000487EB81588B9F3B0AC937DE761342A60E6
+:1061800065F907CF6928D76A277F97DBE1D04B995C
+:10619000DCFADA7959E950F45A36EE6D6880B1F2DA
+:1061A000E818E86897CAD33548327A8F0E244066DB
+:1061B000EF474E87B06C9A2F869D69F06F94A0DFF1
+:1061C00028616FE43CD8EB45397F3CC0E88E7C7F8A
+:1061D0004011ED7BBC91B129BADBF5C3571AAC7401
+:1061E000BF39926DA1D7ACD0104B79FCA96197E46F
+:1061F00093A13F0C3932E8D68F0F312BDF7CD3AD22
+:10620000DFEDFAA74DB2E99F41F2C975122AD18E8E
+:1062100019E3C80AEF2DED5FEF61C921EC218F7EF4
+:10622000968DB70024C861FD2F87E408A4F7513587
+:1062300044DF5738928558BE003DDB878F4AF53FD3
+:106240004281A3520E53DA8CBCAB1848C33C90C8B1
+:1062500026BB18229E422201D14562FFBB95E44530
+:106260007120BD8A03FC3DC472142C07C1F80B5980
+:10627000ECC4A2552FFC5962F353124F19F9C8C64A
+:10628000774294E4C103712A6741173D55E8A6A7F8
+:106290001F7AE819808084CF3C08D313AED69F4A7A
+:1062A000901E7D2040F4F4FE0E3ECE4EE1B346F04B
+:1062B0006D1844BE2F4D443E24C023A7E4D02BE6E6
+:1062C00037B3D7482F7B2A99FC96A27FC0D6D52A10
+:1062D0009AFFDC9F99DE134379CE51615884BDDF6C
+:1062E000D81A20FDBCB9D543CF0EA16F4AAE796153
+:1062F000C71DEC9F8F8CAD79732F7B9E68DBAEA1A1
+:106300005DD33196EB97A1D3BBEB46A19D58AF70FF
+:10631000BBB09DDBAD39825A1DA393FA6A567FCB81
+:10632000DD9EB0797D31F4D096EB9307F7B1EF7A2B
+:106330004B167DD7A70B7BEC23C67FC30F42FA8594
+:1063400005DFEA136487B2F7311FABEFF990213F05
+:106350009E7D0FF6B4A6D33F1D6559A4FF3A4EAEFD
+:1063600087105BE7435A4C23BB760A33594BC9BEAF
+:1063700075C4AA70F6457F2531FAE6C40292A622BA
+:106380007D40C2761E740891BE4A3C68B657FBFA3F
+:106390001F1E0B2E64FDC5AE77850F90F88063DE5F
+:1063A000D8CC72BFBEEDDEAF6A69EC27BF4322FED8
+:1063B0009EBCBEB008FD5D17048AB227E03C72C1E6
+:1063C000015C9FAE5F3C329AA65D6A3E19F651FAB7
+:1063D00067A6766E195ABA4CFD963B1CA42FC1E1F4
+:1063E000A1676E09979750A5909B18687A1A3BF39E
+:1063F000F3027E8F128380B0A73F4D7ABD2D713896
+:10640000D74BD0D095061E1DE19988F3A02986FEB2
+:10641000404E1B9757A6B534AC1F52F8D3A87FA3A4
+:10642000A8FFA4C0E332F44DE1A3386FF307A9EF4E
+:1064300070DC34F884C5F89733EED651688C062C9E
+:1064400074B7F3B36F7C8797EA5DBC7E7B10FDE782
+:106450004C70865A58DDA1EC592F9E55E25949BA25
+:10646000BDDF7897DBDF144788F0B4F70BFBB9FD8D
+:106470009423D6A913935D34CF873F00229E62D523
+:106480001BC3991F89FA4D3FC8167809F5062F3F9F
+:10649000B61FC89EEABDE721B23B4B50AFCA18E712
+:1064A00088D23C2E8510950DFDB616F51D7B5E84B9
+:1064B000C82D8E02D42B5D27515FD64FB87B6ABAA8
+:1064C00078D11DC6FCB88CF5E8F3ECB9C013B9134C
+:1064D000FB57C3A735B66243EE5C29969DD37F5E1A
+:1064E00031F10CCE31CF873EB9E0F3A91DE5BD8A6D
+:1064F000CF9BD9AC5C579E1E4EBDED6291B0FB8622
+:10650000917FA3C0B039A6F9A83FC8E6156BF7B8CC
+:10651000E8CF78BF5DE017FB04F3A08E3D03615D1B
+:106520004375394F6F7122DF6E96A26B10EFB9F58C
+:1065300091E791F5EAC16E2D2B44EF3B1C6C9CBAA0
+:10654000501C3907AAD61DC3E763F72CD4908FBD22
+:106550004C67C969FC66E399A539AC7E92DDEF1BF7
+:10656000E47CBC3A1C9F8A765865C3891388EE0286
+:106570004F7427C23524F2945680F0864E6B7926EC
+:106580007E8D14FC5AE6E0F8E73E20F8A66841E468
+:10659000C75D10D98BED039AB0BB07094726F947B1
+:1065A0003B13E93812E59DE9CDF63093F7D2D47C60
+:1065B000C811F3A15DCC87DE095CFEDB03D58174D5
+:1065C000EB8521EF86FC1BFAD05E2FF109E4FC2A53
+:1065D000F6AC8000F9311721FADF900E0C7BB26B1C
+:1065E00072A777913F67CCABFAF0E9E943183EEA2E
+:1065F000845035D2DF18F7BC90BB051EEDE7241F91
+:10660000E56D4A1EC36BCC3D101EC5EACD2ACF9561
+:10661000CCF2FE6A5FFDC8699A5FF7746B4A68E066
+:1066200076FF43E077B31479CD2C87AC9F5F615937
+:106630000D75A384F5D13924EC7BB96D21D90F4CAC
+:106640003E0348E7792D2DCFE37873AB226BB0BEC4
+:10665000D1FFAC90CD6E97A26F61BF7639AD83B894
+:106660000297B17E8C94A217B09FFA5037C19B3B22
+:106670003D4272C6E0FEE05382FB2F48D74C70BF0C
+:10668000858D516F86F7905E63F0C9328363F403A2
+:1066900009258FE87E5A41BA333A3BE582149D07BB
+:1066A0003BCFB7897936D07C6FC77F4C46BB383A31
+:1066B00004C7CF13762E244F00F7AFAC71CA19F27E
+:1066C00079403B2BB72E09181F1A724A0EDFC83EBD
+:1066D0000DAD0309ED62C38ECD13F3D180674B9FDF
+:1066E0009D1CA4F933444D06232ACED74964B73DF7
+:1066F000529B0CA29FB7B63544DF033593D6DF110A
+:10670000C2E1A304C786D6B0B0AF6BE819AFEB3DCA
+:1067100085FB025B820EB27F37B5561A71598237FC
+:10672000CFB093EBCE909DDC1BCC127EA315BE7830
+:10673000DD19CBBE87D10E82A6385619F623ECEBB5
+:1067400010D73703B5574BAC74EF6BAF0DAE7DD69A
+:10675000046BFB5A2DD981F1C400C68F100FA1F72D
+:10676000FC02C6408D83FC6483DE9E2A6B1C2E5E79
+:10677000977E1FA76F5DB08D07E559A932068B6222
+:106780008D04DF4A015FA67ED6887895517666D063
+:10679000934DB25827C57E5440C0FA88C6E8A1A6DA
+:1067A000E83144C8DD967AEE874180C7E70C3FC7E1
+:1067B00009FC7B6A3C8E379549DFC7F83836F88D7F
+:1067C000F62ED13E131C2E7B7F67593F934CFDD88C
+:1067D000E0CC049F7D7F0CDEB6F693597FD9DA9D1D
+:1067E0001F1C1FFAB503133FA99C672B0FB3D52FAE
+:1067F000B37DBFDAF6BDDA56BECE567FAAADFC0534
+:106800005BFD39B6F2576DF517DABE2FB57D5F69BE
+:106810002BFF576BFDAABB3E197DFF3FA39331AF02
+:10682000FAD345B7ECEFDAE75519244624D8736F4D
+:10683000EE4B8BF1D3BFC892728EFB243C8E058940
+:106840007111933DFE7B357A06D7B1BD1F6959A8FA
+:10685000F7F7C75FF6A33E32DE9F97DEF05F156263
+:106860007AC19558C1E33E719A3759A09C49562286
+:1068700097248A9779D44544724F397B6FD26F6ED3
+:1068800088109F5D25D6F710E7F3B01C7D7AD65FA0
+:106890006C9B8BECC15811E8A3315E94CFFBA7FA37
+:1068A000652978AB15AE9F8291782DCEE1610D5DA3
+:1068B00027F069A753705AECDA1730DEF008F7CBEF
+:1068C000F7CFB0FAD5B728DC0FB94DB96CBFE0D51A
+:1068D000F172AAFFFD0FAAE13656653F02C1CAB1A7
+:1068E000073D3AC63746605C8E6F1A505C6E38883A
+:1068F0003F117F2BC17FB376C3D55314670B350689
+:106900004EA2CE9BA354D0788F4B3D57E1788EECAE
+:10691000F3D7F2FDBCBF7C4CF17741AFE0C649C96B
+:1069200018A3176C758547139DC34467B702EDEE36
+:106930006A14134EDFD5ECB578AFF8F2D06D12FCC7
+:1069400040FD3B0AF7B575E0FE6482CA3E48523905
+:1069500047D8B9639452EE17083F9379F612FA5F5D
+:10696000C12F32BF3CCDFA315BAA1DA314A4E29320
+:106970005288C721A54D2FFC59C278572584F8FEAF
+:10698000948807AE97A58F311E1E18DCFE4EF06B63
+:1069900056BE821285D92679FE5A1F3F39BD46055B
+:1069A00039FEC1ADAE16F46BF6CFB2CA81515F5657
+:1069B0002E3B5EB17DDCA84F4F0E729551044F7F88
+:1069C00039B83580FB07528CD12D7BF074CB91B553
+:1069D000AF2A13114FA0F22149BB5529489515D074
+:1069E000E69BBFBF2A4716E0F7D854A86C5153FD69
+:1069F000B0F78B32BC5F92EE7DA961B79EE5EB7874
+:106A0000B1B0AF86B6C7C92E2D6ACACB32DB59C525
+:106A1000625DD8D3B4D08BF86E6F48AF078DE74670
+:106A2000E1F765AAA74A5D11D42B3056810369ECC2
+:106A3000F26751BE4DFA54ADB2DA5BD317C56AB1F5
+:106A4000BDBFCE01B86FC2D679B2EF8A842E7B78F3
+:106A50004A4CC2BC97F872083FC4F0F22F2AF3A642
+:106A6000B3931ED6B6D3FB1DF5876791DFC2EC3A10
+:106A700099E2E25DEBB13CA4C6011BD2EC173C21CC
+:106A8000F0DB5CCFE964FF5EE18268BA79F8AC22A2
+:106A9000F61994980485A9FD92274E147DA192C100
+:106AA0005B1C7684BDA1149CA57D765382E855516C
+:106AB000AD0430DF80297E8BBDB9A3BD7AC71D68C8
+:106AC000B7B3F768B7EFBC3E300CD78D3DB515B303
+:106AD0001A517FDFE980D1A1141C633AADF43CD197
+:106AE000373FADE3B27E6BC97FAA67E44A43872B89
+:106AF000A547A71837939CD8D755BB1C5CCEFA7016
+:106B0000937CE5F8FD00E7E144921F8AD30CAD6762
+:106B10007E5C556A1E197E8A5DCE02750B49CEB623
+:106B2000D7977911CFDEBA6AC9C5EA6DC19A69FCF7
+:106B30007163BC4CF05438A3DE00CDC385523ABA21
+:106B40001546D3C7CF35A7883F2B5109DB67AA3736
+:106B5000C229E441CCAB4231AF82535AE6D0BCD813
+:106B6000A5C0438C5E0FD755B78D26FA3948EEA6DF
+:106B70006B5CCF164EE0FB993E46AF67D9BAF7483B
+:106B8000038413ECFD23135C96FD9942411FBB3C2B
+:106B90003E32807E01B3FFC5E45F71AA7CFFB61C64
+:106BA000CAD19E7AB8EED2ED074BDF608343D39112
+:106BB000BF35D503C44DDA2E779D9A773DCA63CD94
+:106BC00020F3276CFA029EBB6BFD68C607DF2EA67A
+:106BD0002F201D7D5C167F7C207AD8E93F0EE99935
+:106BE000FDE9D1D3FE7D8853C40107498F27EBCB44
+:106BF000B6968732D7B7E363B4DB28E6DBE7A14775
+:106C0000C6F9AF4180E24B53214CCFE910A167B7E1
+:106C100012FD9293D59F092D5436E2508D0ADF97CD
+:106C2000802A3EAEB1BFAD4C03B293C78C077D2F17
+:106C3000EAE72973C4A6AFA29DF3A0D1C6E048E35A
+:106C400057013C447817DBD663234E31B4295E5F8D
+:106C5000CDFA2DAE77501CA3B8E6B0D7BC2EFBC53D
+:106C6000FC31FADBC9BEE3FABCB36970FC32EA3D21
+:106C7000A12429AFEB899A87DA70B951F2DE0EA60A
+:106C80006B6FA7EB968FBABC9134F0EC5C7494F206
+:106C9000B776D65C3A8E3290DC8C91D3DBB39F779B
+:106CA0007B896E3B733DB7F0E49C5596FC0390D511
+:106CB00052F3B83B3F82DCC8A5F489669D2F5B9CEC
+:106CC000221FC4073E94FF4CF4309E9F361D9E9CAD
+:106CD000DAB23492A67D859BDB136B722186F92292
+:106CE0004FBEAEE898DFC00496E471D22D211DEDB1
+:106CF00097355EAE979FAC05FA3E29577C7F2C44B2
+:106D0000F954C59D1073B1F5ACF8B5458FE4B27A6E
+:106D10009B16310FB234F57E53F86407EE133FF340
+:106D20008A2380F6D1246FC2136678D5887570E700
+:106D3000A29394771CDBA58447937E97409A44DE08
+:106D4000BC25AE79DCA910BC3BC30F7B716F6E47CD
+:106D50002849FD7C63F2494F88E1B7A9A4DB837819
+:106D60006EAE7998D6CBC38BCABE5C4164B5E6974C
+:106D7000CC94A7746B98BFBB88EF5BE426BB3D98AF
+:106D80009FE46F50E046069F5FE5F86E5A033AAE07
+:106D900053D5228F4482D9E41717D9F2B80A6D79F6
+:106DA0002681F0CC77709F9FF6FF1109B9E991B168
+:106DB000184F6C7688F4538DE6A94FE0E70B6B54BF
+:106DC0007FA67CCC8B790B3BDA9500AE7F015BBF55
+:106DD000763C02103DA149D40F8DB3E351BE4E065F
+:106DE000265266316B2AE00E30B887B021DBAD70D9
+:106DF0001B74B58FE3B395DF36E4B91846A31E3292
+:106E0000E2CE06FC76B9CD9FA41F7999E1BBF315BC
+:106E100095D6EB9D352F7FAD19D7F94A37E5717DB2
+:106E2000E1E2C1A6EFB3E72F3E385A8ECF2F16ED21
+:106E30009FD08C74107912463CAF107B26FB55E82E
+:106E40003563BCAA3DEDCE7C7A45F9159B4FBEDE7D
+:106E50008871E7A22620FBB748E1F2E96B77E86D7D
+:106E60000CFEFCEBE2240FC50D09025A6DE892629C
+:106E7000267B5E15F69CAF292AE13EFE8D0D712F13
+:106E8000E68BF844FCD737214E76D20CF90D4F52E1
+:106E90004DF1CFC87F37E69F9D3F158B78DE497156
+:106EA000BB1246B08B9B5A1C6487D7F07CEF8ACE0E
+:106EB0002E89FB7F3C9F9E87D4D933D2C8F30977B4
+:106EC000713BDDC8FFF63759F917E8CB9F8FD2BE6B
+:106ED0006B69A7ED7BA4EE2D2E87567E96B9043FF5
+:106EE0002B44FEA0CD4FDBDC24F6E9548F7E29BB7A
+:106EF000F6159187F32AE23FA6FFF79B33E8DF9B65
+:106F0000DC7C9F5F767477901F779D83FC383B1CF9
+:106F10005B9AB8DEDBEF7258ECF82B1DFF36A1FF51
+:106F20006547F26F327E531FFE7F9BF1EFFF1B8F91
+:106F3000BFE16F4CFF1D7F63FC0FFE07E33FAF52C5
+:106F4000B2F8697B5D1EEAEF87EEBEBC0D8BFE9644
+:106F50001DE9FDED332E87258FD8C84B9CD6A02D7B
+:106F600070A1BE0CF3731EF6FE66C82F75A01EDC62
+:106F700021F2B1991ED564CC779A6C9CD3E0FAAF1C
+:106F80004EE8BF3AA1FF0E67D0ABD5355CBF33FBEF
+:106F9000420F95E292119F5581EBF72985F28B0FF5
+:106FA000035B6650AF85DC69F3B10B05DC767D5A77
+:106FB00028F469F54BB6F7428FDAD7F9D2BEF82933
+:106FC00050FCF4BFBB447EA94DAF1A74D851C3ED39
+:106FD000E5FC39E9EDC14D363EAA135A280FC1CE62
+:106FE0008F332EEE5F1BFC58E0D17EED2AC8CCEF2C
+:106FF000A4E0F70D82DFBF7405E869E48D64E277F1
+:107000008D9B8FF359DFD9601B6213A9253EC8827F
+:107010004F326CEAA6F82F7C03CCFEE5968F981DC4
+:1070200082EBBFAA52FCECB3F9E03092ED3F32F6AE
+:10703000E9D89FB39BC751E57C97CDDFB2DBC11E7A
+:10704000CA8FDBA9F1F3563B6BF6EE5C81EBD32BD9
+:107050007C9F79676EE74B78F40DE2E31584C3B04B
+:107060001B41C467D1A4E0F928F6FD27ABDDBFF3CF
+:10707000A3AE04DA5F815229CC3C2BE8083D9C9FEB
+:10708000F63C9ECDDE57DD3E8BBF0B370ECE6E5FDE
+:107090002DF8CDFCC502B7697EAFF6CD1CCFF3A2AB
+:1070A000A607709F47D2663A309E9EA91F8CF49E19
+:1070B00033ED3B352ADA70EC4F42FFB132E53F0247
+:1070C00094F0F8BC81FF60CF0D34DDC5F7BF055DDE
+:1070D000F3AFEBFAABF891469CD7A8A72A094877FB
+:1070E0003EC81EB7BBD1A94D46FC060BFF6E143837
+:1070F000F6FCE72AB92E5DFC2029F4AB1A79EAC523
+:107100009B59D50973251EDF67669B795F6D53BE5A
+:1071100052972EDEF533314F7E894139D2EB09C8C3
+:107120009328AF04102F633EDAC7BF568C7BED1552
+:107130008EFF8A98D7D78A790D10A6FD984CE3D692
+:107140000ABD613C3FE9B8498177AD4BC4350618AB
+:1071500077B6C073F615E27B5E8C3B7B90F82E1001
+:10716000E32DB8C2713F14E32E18E4B8770BFADEB2
+:107170007D8574563C92E86770746E13E3B55DE1EB
+:10718000B801316EDB20C7DD26E8BBED0AE95C22E1
+:10719000C6DD66A373A6F9BBF70AC7ABF4F0F9B373
+:1071A0005FCC5FBB5E33C6578B1C116CBF3368ED81
+:1071B000E78B6E3EBEF184C4C7E4BF168B7DDDC98C
+:1071C0002BEE5DA8A519D7A86F5F8F338DF335110E
+:1071D000AF319EC6387EB11F3AF93A364E1AFA18C8
+:1071E000F5AF75713D98A9FFA5029EA597898751B6
+:1071F000BF16FB9F98B9FFFB041CF7D9E01FA87FBF
+:10720000A3FEEC01E0EF1070745C26FC46FD050364
+:10721000F4FF2D01C7B72E137EA3FEDD03D0E709CF
+:1072200001C7139709BF51BF6D80FE9F16703C7D4B
+:1072300099F01BF5B70D409FE7041CCF5D26FC4677
+:10724000FDFD7DF3DD3AFF54E33C50182A31DF7831
+:10725000046485E97E8370F204FA01EA2A7EBF01A4
+:1072600074D9CF4199CE4FB1297EE2BE8A18D6DFBC
+:107270007D178FFBEDBE16C88FD85D20F295455C5B
+:107280004B15F6E0EE6B791C647790E7EF832D5E8B
+:10729000B49BF93BB4EF5BC2F399D5AA3899983403
+:1072A0005CA13011439857C3CF5319F69E71AE6A53
+:1072B000B58853EDD680E254BBAB7879E774D01D26
+:1072C000A5A6F3569509CA4345C316E3B1A9F362CF
+:1072D0001AACAA36E563AC4A50BE8122F246184188
+:1072E000C09297613BA765DCA37073589B816AAE1F
+:1072F0007402DFCF2B8D58FD87263CBCC5EAFF56B4
+:10730000E8C900D64BA3670E7914CE3F91B7395721
+:10731000E06FD0AD5AF073CBEC0FBAA7313C5F9C55
+:10732000E2C44C1678F194A0E31459E7FBE7E0348B
+:10733000EBED3E39CFE00FAA9D2D27BD8C3E37BF28
+:10734000046164A36F97B6264471B58F48FE28AEDA
+:10735000C6C6BD79575C41F99BD5199A86F1C0B96B
+:107360002F8556AB987FDD09610DC9FBD1D7A99F49
+:10737000BC7608EB9C556D01B2736DF139E3BCAF7F
+:1073800088CF61B8DAEC5FCE127857B707D6E0D66F
+:107390005DF574B7C57E9D25FCCC2F696EEB394930
+:1073A00071EE7196CDCFECF458E3756A676406C64A
+:1073B000BFE5B9A7353CF73C26220586B2CFB745D5
+:1073C000B629189F9CB5AB85E7F567B80F23E7B1E1
+:1073D000393EB3FD3E46C8F32F775DDA5E37E20CE7
+:1073E00046DCE114E619BBD14F0F0ABE70B932E496
+:1073F000236FAE6491934E0FD7239D1E1EC7FF4F80
+:1074000039F9EBCAC96F3CD6F843277E63F3B12242
+:107410009C7E9FBED1E3FACFF9FA29F0C1EF4DCFA0
+:107420000768CAB1E4131B795576BA19F7C618650F
+:107430000FA43F8F57E215EBACDDAF7F235A8B785B
+:1074400019711A80FB6DFB9B53C2978A4BC8C6BD4E
+:10745000038E3764C4A7D22BF48F020AF56FC3835F
+:10746000E67D61EA3E1D7B7F6BC4791E032F677941
+:1074700044C37B56D818B4DF8779EB87AB707D0C9B
+:1074800058F0D6BC7CBDD950C9E56D43A5A2679321
+:10749000BC45ADF71695EFF5A4B32B8C2798EFAB51
+:1074A00028EB0FAFAB3C1A33C3E312F0D8FB999330
+:1074B000119E464BFCEB72E1715F05D08D72AB30D3
+:1074C0002926F9FDBAA53F47A54EE7FA33F58367AC
+:1074D00064082F1B5F328DEF29B19E5770E5675905
+:1074E000E45D51F36CF78AD8E4AB2F2E34B8F1EC9D
+:1074F000E718DBC5F9147B7BAF1287701ABA7B43A0
+:10750000F67C0C9DF8603F5FE30CD8E0B6F5BF0950
+:10751000DFA5C9F730EE195A27D6B5F58A4EF656CB
+:107520008C8189F99E6B845C2A019DEE67FAA657CF
+:107530004A8B3F84D3AFB74A797AF83D2556BABB18
+:10754000F2F3AC7C50D29FE7586FCCFBC07ECD7C71
+:10755000BF56FF797E2C7CA9F5BCEF5E2DE937F292
+:10756000C70CA5035EDB3D1683E4AFF2E11080217A
+:10757000A632D3AB18AF657384F279EDF54F1BF4E7
+:107580007B632FC16FE8E9EC5D465EED27C3439254
+:1075900040EC935BDB679C8742CFC942AE9F1F00E4
+:1075A000FF4CFCCD2A77D8E6CBE0F8EBC5798FEB22
+:1075B0009EA2894BB0ACF33ED37810E0F85EEEBCEF
+:1075C000FFA4700EA98B02EA3357300A51B6CE17CA
+:1075D00005E3B44FAE4A3D31F4C7D89C0A219F77EA
+:1075E0000E09F1F3E3A67A53593B67A923E6C43C9D
+:1075F00010089FC0FAB12074617D8CC7ECAD4AD5EC
+:10760000532588A0BCAB054A04DF1BFDE54CB1F651
+:10761000C7CC04D97C1ECBC817205787E1EF9CCC80
+:10762000FC53D6DEC5ECD03DE9F44916B743B39F11
+:10763000F3D279435F44D551248B26E894175CD468
+:107640000861F4E72A3ABB21CA3AFD26C23111BFCC
+:10765000C7E9DE85A25D71DAB7CF77F373EC454DEC
+:10766000716981699CCA2C2EDF53E778689DF87A8E
+:107670002DBFDFA23BB8305E8BE3D5F07D2F5FBE20
+:1076800002C3183D7CAFB9B9FF392109E67B23DE7F
+:107690006E85EA45A301DE6DF5D0F37C6B809E819B
+:1076A0008FFE279DE75B33715208F3472FFA1A4785
+:1076B000E2BAF17E6B90BE6F7E301CC27C22F9E490
+:1076C000EB749F444ADE6332D430BA4D486AC83FF7
+:1076D00013FE7BBDA67DFE3EBC18BE0BD8381B2515
+:1076E000C7ED381E9617929C7A649729FFC325FC34
+:1076F00046E71A883C5585F797E8D2DD55A6F75E30
+:1077000066B7E1FA3A31407C4FD1536F13F4BE169D
+:10771000FDDDA297045DE7D45C72DF64536BA27B4E
+:10772000FAE85459CD70EE6DB673EA0D591837C2A8
+:10773000439F6CBC69732A8722BD1E755ACF931B69
+:107740004F39303E5C8E7563450E9A87E27E959583
+:10775000578586E69AFA9F2DE4523EF923A26F766A
+:1077600015CF0F617FF545A6FCFF926823BFC7AF19
+:10777000859F9331F62147DE9A6CC32D8991ABAC7E
+:10778000E767668AFB504AD73828FFB57432E9505C
+:10779000286D03CAB3DA2787AB51BE1F835772F136
+:1077A000007B09836F389BAAA5316B3FFB16D7BFBF
+:1077B000807100E37E95D5EDBCBF11A1F0A910C684
+:1077C0004FAA1C642F8F84B007FB1FA93A00CF1764
+:1077D0008D02533FAC3CBCC5DAAF1DDE529FC38166
+:1077E000F10E039E1170C4A3E553FFA0B3F625CCA0
+:1077F000CD2B4E039F7D9C5146BDB1D5D509483355
+:107800002EF4B4E1BE50BFF107E8B7354BD8E13EE6
+:10781000F0A33EDF2571FC632FCAE103C8D7BB0F7D
+:1078200052BCA6646527ADEB9D59DCBE5BCBEC0179
+:10783000D589760A7B8ECE2C877280112E87D68FC3
+:10784000B4F2F76456EDD62C8C87654DDD8A7298BC
+:10785000A584BE82FCC83AE504DCC7CCD2E234FF82
+:10786000A09CDB191BABCA7270BE65B5B8D2FA6BAF
+:10787000ED594E826F5796A4605E28932DC24B69D6
+:107880000A7D6B262B7617688FE3387F2E88D2D33C
+:10789000781F5CD81042F99CB6A48AE25FBD9D12A5
+:1078A000C5BFDE927417A66A2F9BDB32EE46468F69
+:1078B000D9B9D127B0DD1239B1D6C9E0597E6B4BA9
+:1078C00005D2A71EF3FD0A70B818F7074BCE841532
+:1078D0003C1756A2249C4CBE3D8193AFF167AC1679
+:1078E000E5DD832761183FFDE5DA3BE837F9C43968
+:1078F00024197A629817E89F0270C6C437F4E9CC5D
+:1079000065DCD3359733D17FA0E722D6F6CC685C0F
+:10791000E5C39A4476814EF47305C2E3104E39787C
+:10792000AAB0DCB4CEB9057EEE690BC5FD489AF06D
+:107930006FC260F66FDD022FD4E1674CED9D416BA5
+:10794000590EFC75F130EC6EE9A7FF7E0EF9B8FA1E
+:107950006927C53DA73DED4CDCC0CACBF748B4CE86
+:10796000388E73BDFEFE7E89E67DC2E7223DF05E65
+:10797000C043E56677F796CFB172CFD332EC25B22C
+:1079800034D07D52E78CF5F4282F2F160ED2F23D1D
+:1079900027E6637F8D47DD80EBC4F21F2DB9E973C5
+:1079A000ACBC84C93156597EA0CD358C95EFD2A59B
+:1079B0002E2C5F980A2467B13C978E792D17FCDD39
+:1079C0008537ABB48E41680CEE6F7717CE65F2B891
+:1079D000547F6A26B65B7A48C2482AC3E3C00B4587
+:1079E0000CAEE5DF91687D5C76309BDFBD22E877E9
+:1079F0008EA17203FBBE92E189FA7009C46722BFAF
+:107A0000961FD8E632AF73EFB65652EA87515EFE44
+:107A10001D360E6BB7E27B5218515C81F90EB85ED1
+:107A2000FEC8DBB04F45FCDA5C153EC46B9D0BEB2A
+:107A30002DD1173CE30D217C7B5C33D9F7A5BBF638
+:107A4000B8165721DDE0765C57971DFC0CBFB3C01C
+:107A500080AB53267F6165AE672FDD6BAADAEE47F8
+:107A6000E9830B2C702D157A83F97D2EF379B76796
+:107A7000B273494E971D942DE318FC8F9D067E1E10
+:107A8000ED273E3A8F66F0CF58AF0CFEAD342EFA9C
+:107A9000537A26A583670BF283C11367FE0D3E1F41
+:107AA0006E0DD2F3D1D610F1693BD2710CCF4BC120
+:107AB000F76CDED6E23D687E0D2F0403C8ABD76AB3
+:107AC000310F332FC2CB85B746A5D025EC74E3B96F
+:107AD000DD195D8046CE94EC6FCF50983FB6DD1532
+:107AE000BD1B43D60165EF8CE96CCD6BCA8E4CCAC9
+:107AF00036EDFBAD15F7275D931D22FCD716B9882F
+:107B0000DEDB6F9BB44FC49F689DDC7EDBE22730D9
+:107B10003ECEDA7F3E1BFD0BB1FF97A97DE1FC1A3B
+:107B20004BFBC2F98D46FB99D4DE73E9F6DBE75FC8
+:107B3000671D7FFE52A3FD4D04BF7A69F80B6F9F4E
+:107B4000621DFFF6266ADFECE6FCEDC9F550BE7556
+:107B5000BB379C407D4C17A94DC07CF28ABD58CFE5
+:107B6000587798E6D7307F5B3D945BBD01CC72348B
+:107B7000753EC28179596639CAA9C9B2CCAB5C2DB0
+:107B8000CF521E5237CC52BF205266F93EB4E16A42
+:107B90009B5CAA747E91CA08141AE60C4ED7301763
+:107BA000E9A3DA61DC0EBEF7B897CAF75EC7F1BB8E
+:107BB00077984AF3186146BFFC5E57F41AF3BDADDF
+:107BC0000C2F093773EE54A3F7211EA9F72107BE26
+:107BD000CF12F94E596E207DB7AE74D2BE98899EF1
+:107BE0001DC3993CB0727BB68BD35DF061DDF0C5EF
+:107BF00041B3BDBE76B8AB01FD0D7C7F878AE345FE
+:107C0000D6E278CDAE9E0AB43BECE3B8CB6A2CE367
+:107C1000784634D238DBB2793CD518C73DA2D1368C
+:107C20008EA761AF782FC67904E52CD338EBCAAEA6
+:107C3000B3E23362298DB3DB36CEBA114B6DE36408
+:107C4000717CD87B318E7EA971DCA3A658F119D93D
+:107C500044E3FC931D9F914DB671541A07DFE3383E
+:107C6000CCF00DE17D592E77CF62E2FF4FBD64E786
+:107C7000B8DCD127C9CEF9B597EC1C564BC37A5066
+:107C8000C9FDDB7BB2F3F8BD5F598CFFAA99CF31F8
+:107C900091771023BFF84E0122E80C22A6DF560888
+:107CA000195C7468F688367C1E9D165C80FEE8A31D
+:107CB0003E8AE3BD7F749AEB8E34FAE8CEB8F35C6B
+:107CC000D224CF7D7A55C46383D97C1FD2289F13D9
+:107CD000F19F33182762CFB79C40FED059112F4A2D
+:107CE000C1DB46EDCE897DBD73BBF83A7571DB69AA
+:107CF00027BF37155EA96270CF1368DC19B7DE9312
+:107D0000D92CF8D1F323373F07045A31DD8FD73907
+:107D1000C4122FFCCDF17F7881E7DD4131DEF7FB26
+:107D2000D58EA79EC76AAF4A0B86AF64F8361CD9BA
+:107D3000E62C66E5F79DC9F961D5D44F8393CEDF74
+:107D40001B7EC82D51A7C57EFE5AA3B57C9BCD9E38
+:107D50007E23BBCCD89FE5E3867427F26B1EEEB181
+:107D60003216DE864F4ABE0B10BFE607785B039ED5
+:107D7000E6FB9D90A0F52E594071CE5801C569A231
+:107D8000C6BA65836FBED3A345183FE7DF27131D2F
+:107D9000EDF0268F676B0EE6E7243BFF9713CFF1DC
+:107DA0000C04FFEDABACDF21E6B4DC4760C8C15783
+:107DB0001A6AF79D35C9C72DD159FBCE5AE834DB75
+:107DC00052BEADE5164BFDDB572DB07C5F10BBCB33
+:107DD000F2FD8E8EBB2DE53BE3F759EA2FE96CB33C
+:107DE0007CBF4B5F6FF9BEECE0364B7979D70E4B19
+:107DF000FDE6A37B2CDF1DC7AFFA12F981BF94E922
+:107E0000BCF31FD5735BD07EFB6340A1FD9CB7C55F
+:107E1000FEDDBBE23EA015287B9371FE8CF7A0DF50
+:107E2000D09CC5E633B325C6A9056B3BA6A01E01B1
+:107E3000BA5AA35A2D5E1B63CEEE64713E51EE74A6
+:107E40004162086EAFA4E2B03D72EABB9264DFC744
+:107E500067FE2E772A69BF2B49256DBF17A49E0A9E
+:107E6000B41F63AFBBD39E034FCD4B28864BDC2F93
+:107E700079DE018D66FF6D9ECAE3432F644F9DA797
+:107E800016D071699AEF4D878BA6A2DFD0E44A54D1
+:107E9000A4DBB7E91BAF4BA27B03E7A97CBEDCA543
+:107EA000175BE269CB0E8EB2CCFBD7B2A237ABAC7C
+:107EB000DEF91332E959483C37E2CB63717C6D1E21
+:107EC000BE87A305B43EBEDAAAED3BCBFC80D75AF1
+:107ED000EBE8F9ABD6C8BEB3CC257CA3B581CABF4D
+:107EE0006D8DD233D9DA48CF33AD2DF4FD6CEB2A4A
+:107EF0002A9F6B8DD1F3EDD60E7ABEDB1AA7EFE782
+:107F00005B3BA9FC7EAB4E4F631E18F62E44843DAE
+:107F1000D9F78309BCDC2B70900B8D386698EE95F1
+:107F2000EA552F56A01DDDFB9A9BF26E33D1C92E68
+:107F30007799F9A7D17ABF58B7C6998DA7378BF330
+:107F4000C7EB803ACC91583FDA4571B4AC9F7E863E
+:107F5000EC71F65E017ECF7278769AFB3ED1FF46D9
+:107F60007E0DC427A3FEB96FFFDBA48555C89F32E1
+:107F70007EEFD773720BE7DBBEF097C70E4C3FB2B4
+:107F8000F98AFAD351FAE96F46607CEABD02839E12
+:107F9000DD2330B8A5A8911D2887BD47DC8457EFA5
+:107FA000B16C9E8F8241B541E4BF2E3BE8D5CDFA3E
+:107FB000617957AE6ED51745BA595FF49EDAE7C7B7
+:107FC00079BF3228EB67C7A37C68423EB8DC19FD55
+:107FD0002FEF2AD5554B3FD6726F5CAAA37B202189
+:107FE0009433F712F7A7AE0CBA689C770F8EA2FCF9
+:107FF00003E627EA6779BC53E7E30675B35C36AD61
+:10800000CAD6CF0E49C197A9DFBF367C0047E077BB
+:108010009ECCE771077A82F2AF2EBAE7ED98F32291
+:10802000AE3B6EF6BF8F295F48A1B2D16F73971C2C
+:1080300073E3795E3864198FB50B193EBAF9FE9C6B
+:10804000FE7CB7E683FF166589D66D7EBE3C8AE767
+:10805000CB597F1714B543BA2675BEBC59C8E57213
+:108060004FD21565AFDE3B32EA92F920EFB69E0A99
+:1080700028A3318F20EE4267A4B1EBAAE9A81FDF45
+:108080003BB2BA10E369CBE4DE7BD39D9BFD50E5A8
+:108090007136D09D3D49133E467C0680F5EB49C1C3
+:1080A0008F927ECE54B6EB6BE3E9F0F1B8FB8A43D6
+:1080B000A7677E8EC1BFE2E8072E84E3A81A75F891
+:1080C0004CF84BE27CFDD2836FBA10BFB79DB18AEA
+:1080D000FB2FA1A7FAC3A9062DFBA131E8C679BCE5
+:1080E00090FFF602CAD3577ECDA6E63BBF7002FED4
+:1080F0009E83B15F619C7B5804113FD26BE1916517
+:10810000141F7EE7992F0A7B2E3E09E5E33D70D4CC
+:10811000217EEFC1CBFEF126FA95FBB81F031DDCD3
+:108120008E31CE05327BD662D72CE9B49617C39C2C
+:1081300042D41B8B1F75822EE1FD9FA67B9818DE13
+:10814000F93E6EEF2E8196B568CF296EEE1F2C0C8E
+:108150008052CCF4E9F21F3E3609EDFECFF8F8BEAE
+:10816000A311C7B82B8FDB7B4BF37517EE27FCEE03
+:10817000C8F8799F43E973EB6B715D869CF4FB7FD4
+:10818000777458E11B087E3BBCC6B9F77EF1140139
+:10819000877C504A9B9F36D927E44EE891877C56CE
+:1081A0003B7F9DAD5CEF1371561964E4F37B014F87
+:1081B000CC9143DFE99C6DECB03BBC3A84F76A4557
+:1081C00022285FCC2E1807A67ABF57A3F4FEBCF472
+:1081D000D2623A67AE24C6513E9E07284FD125E4AD
+:1081E00041CEF28F836B304EDA424EFD6AAF7F2F65
+:1081F00096D7FAF839A8669CA7ACBFCDFE99A730F0
+:10820000AEEF8178422BC5FD6F6BFCDB1BB296B3E2
+:10821000713EA13EC117C88F3050BC28BBD25ACF87
+:1082200017B69697F6D129219BCF7DF83D6A027F3C
+:10823000AF026A94F366BB798587C30F78AF2AAB28
+:108240007F8FB0E757402846798B412E07F7CCE265
+:108250007913F7F842E118FB2E291A9D8F58874DA4
+:108260004DEB58F38712E826BDDEACF4B8502E9BD8
+:108270003F54E8FD6E35FA20D2D5051AD9B91E460D
+:1082800034DCBF56D43A8BDD0B25E27E405BFEC268
+:10829000265FC0E2EF197AC129F422D317EB7C05DF
+:1082A000A8077B66F27DF5A48BEFEFF07AAE54BDA4
+:1082B0004D0847A67ADE54BD6DE9EA2DFFE1779FB0
+:1082C00089B1F9BEF4FBDFF4E366DA3B4ABC10F394
+:1082D0001F9A0EACF1A31CBFADC4FC88F73B7AFA21
+:1082E000BCF79F097D87F94E785E7E85E0D3BBFFA2
+:1082F000B8F126A4FBC5034E3A6FDF7CD09D7033E6
+:1083000026AE38721797A783EE3779791DFDFE48A0
+:10831000F351EB7C5BFAE4370B43B4B9172B16F738
+:10832000B393FDBC62FFEF67A23DD20C3DA427ECE6
+:10833000ED70FC0FF368FD5A80E7FEEDDF8D7CAB3E
+:108340006621F7CD4736525E55F391599447D56C67
+:108350009BE78DC20F39EAB3FE6E83410FD0B95D42
+:10836000BCFA3BDF1AF72683E7FCFE5FF8254BFCDF
+:1083700088EB89DEAE3B1E7F369459BFBF2FFCFAD7
+:10838000543B9DDFFF7D94DBF1708C3F9B9C093F4C
+:10839000FA4D4D7B9C61A641A0E9BBFB9EF836CA15
+:1083A000F7EB6E8A372CFBEEF3AF5EC7CACB9E723B
+:1083B000E6D7733454CC0336F88267DC315FD7E0FC
+:1083C000C3D21F3CEF0A8DE5EF1FC84BF163D953B1
+:1083D000275C30B63FFDA6759D70F1F3E736BE749D
+:1083E000BD3913EDEED5DFF9930BE7D73BC7251861
+:1083F0005ADABF7DE39EE7C9AE433A111F059FFAE3
+:10840000F8D68F5F899B9E9D40F502B88E0DC4AF54
+:108410006FA3CC14905C7FEF59DC2FF8953B8C74E4
+:1084200068FCDED7FD88CF5B4A0B97EFC7D614E216
+:108430003E7AA3335618A0277FDFB8FB1B24774B67
+:108440004E7FA390E7416945FCF78C62451407DC39
+:108450007533E1B918A2247F8D8FC99487FE470533
+:10846000EA9E4A333F6EF0733DF6D65E375D7EF787
+:10847000162A5CF4175F96757EDE96E7257EC3D8D4
+:10848000F7C0FB1B59F98F1ECEAF02BFC3B8D7CAC6
+:108490006391DBFDEBBA914FEF0ED78662BC92D1B0
+:1084A0002126E826A11E924FCF18CAF90421659211
+:1084B00068C7F4E4347C8FF5BB9D9A779CA59D58E2
+:1084C000D7F8F8F788F119DC59689FBD55C8EC9DBD
+:1084D00034F82DF31BF39FD91F263933CD733EEFAC
+:1084E000F7AFE7F3DC98F7FAEC3AFCFEAFAFF079C0
+:1084F00084ED709D67702586D2F7137325D20B6EBD
+:1085000048A49BDFFB9D627E5BBF33AF9CEC5B436B
+:108510004E18FC0AAE5B2979E1FBBC8C0F64BF2DC1
+:108520007E94B537DBE7382ED573A5DE9BD6FB25C9
+:10853000421F5CE7B7FD8ECBAE8241DDFBD3E4D4B6
+:108540009FF836CE5F365F71FD69FAAE93F244FE56
+:1085500070E8B957BFCAE4FC0F5DC6BCB5EA53FB6F
+:10856000BC6D3C3C11D2CDDB3FA861483B6FD9FBD1
+:10857000B4F3564D923CFF47E953837E0BFDD63C46
+:1085800027433F66A2A35D3FFEC517227ADAF52393
+:10859000FB7B0526F5974343FE0CB95BFA4FCBE90D
+:1085A0007742FAE4D390BF3EF934E4CF8EAF957EA4
+:1085B000F6EF9F4143C58817B3A7F32188F9309E92
+:1085C000FA1399E2A917184C6B199F2F1C2AA5734F
+:1085D000C46BBCDC3FBF10E8F1E755D13D3854EE29
+:1085E0002970AD457D61BCEFF1F2F8F785488FDF6A
+:1085F0009C07F2E631D98FFB5D491DEAD2F9234C85
+:1086000023131C49C8F49DC78B2FA0FD87E3658DFC
+:10861000D0916F336475C42AF4F3E3FCBCFCA2B6BA
+:10862000AFF8711FFEC2B1515B517FDDF9A20CE2C0
+:10863000F71315CC37B943F0FF6D886D9FC2F0BCBE
+:10864000E318F72B166D4A2F2F4B45FDC5EA3D2E3B
+:10865000D44BCC2F38638E872F15BF4BD6B8CBF6B3
+:10866000FED81749AE96DAE42A2AFCC6EF1A7275CC
+:108670002D5C2BFC3687399F6D865CB515ED920B12
+:10868000A7781CB2F7984CFCE83D24F1FC278C0736
+:108690004F4679E87199F3D8CEA3FCA5B9DFA0EFD6
+:1086A000FBD3BF99743FABD2F4CCAFC7ED64CFF32B
+:1086B000CFBC5EF1632CFFF09F47FC1AFAD79F7680
+:1086C000FCCFB49F7DE1B89BE0B870FC6723EEC798
+:1086D000F2B36EBAAFE6C2436E9EFF79DC47F7D6BF
+:1086E0005E18CEF38556FFE44FE3E8BE3EBCC99D5D
+:1086F000F1ED353FF7C77A8FFDDB6F317FB8F79823
+:108700003B8478341FCFA6FDADE667BD14A7B9F052
+:10871000933F4D32E7335D293E2BC47D88177CD0D3
+:108720008079CA1772F9BE41F38F27EFC37344CB28
+:108730008F9C70E17ECCB49FFEFB38D43B170E7348
+:108740007BE27D677237EEB3FECE7FFB3A27C677BA
+:1087500071BD1E06D09AA3DF88F7E1F4A70BA7C36B
+:10876000054607C48BD1A511F565267AFCEFBF5BE2
+:108770007A7C301FC76F3AF6599A3729BA481A7F60
+:10878000EFD3F16813C39FBF3FFEA771681FFDA120
+:10879000AB8DD6F981F02ECAF97F0D6F293118BC47
+:1087A0006BFE6EF1E6F27FDC1FE2797FB679D05F77
+:1087B000CE7F782F95BFE70B13BC839CFF0D7FB74F
+:1087C000F87F42BE1F667CF70FCCF7FF92C3F78598
+:1087D000FFFEF01E88EF2F0ABEFB02988770E1278C
+:1087E000FF4EF17503FF81F0DEFE7F29DE863DB48A
+:1087F000C1118E9795621E76A23BC4E05C53392767
+:108800008E612959E45DDBE17A2187FB17B2C4E36D
+:1088100036309CC78F40F81B7DBF03A9F2F3558A01
+:10882000BA96DF47A684E97EBD0D572F0C536E071D
+:1088300054BF16C572C914FA7D5BBBDFD52E8126E5
+:1088400031FB4FB9FA0BA7D0FE77563A12EE71F40E
+:108850007C139FEB44DCCB197059FC0DD5E62778CF
+:1088600043D6EF6ED19F07AAE3F8FBDD1E5509E85A
+:108870006C7CB5364EF8606E67DCB46F88BF8F9D38
+:1088800030F9637BF107024DF6E4E5D2EF4F39DCB6
+:10889000FF94A5EA6ECC8B85AB1CFC7E73E0E78A67
+:1088A00037948475BA8F59F897297AAEED463A2AEB
+:1088B000C0FC438E1FF99520FC494574A1543A34FD
+:1088C000AFB59EF09706E40FE7C78826C19F9516BF
+:1088D0007E18F44FC3170B3F0CFA5E2E5FECFCB012
+:1088E000D3FDE7393C3E67E793251FA480FB2509AC
+:1088F0006620FFECD03E8A8BBCF78F6FDE84F59745
+:10890000FD5806FCDDC4F70FF92081F357D15DE86F
+:10891000672D3D22535CF8FF002820961900800047
+:10892000000000001F8B080000000000000BED7D20
+:108930007B7C54D5B5F03E73CE4C6692C964F29AF6
+:10894000CCE4C524811834E0244040419D104010FF
+:10895000EE754011B451470810CC13A4BDB4D51F17
+:1089600003C1343C6C43E5A5453A202AAD5803A623
+:108970005E50D4411E62AB6DB4DC5BB46883A280F0
+:10898000F24869F5C3FB79CBB7D6DA7B67CE994C51
+:1089900040FBF577BF7FBEFC73B2CFD967EFB5D789
+:1089A0007BADBDCE9E4B97E0EF26C62E892B632D67
+:1089B0008C653256F77C3263198CDDBF2B213CA5C8
+:1089C00000AE2F7E3C940D61ECDCB29E4339703FCB
+:1089D000F44BC5F714760F750FBD0DEEDFAFB17B0D
+:1089E00003A5D171E435CD69626C046367F624CDCB
+:1089F0000CDB1953B6EFBB87C6ED98614E50A2FD54
+:108A00006C4E33CD0BFDFCF83CF40B253C48E93BA8
+:108A10001E634BF978BF50387CBBCD611BC2B77D5C
+:108A20008B250870346DFF8BC50F70543DFF9CA3E0
+:108A30001BE66BDAADB24809A3BF4B0C9FAB918428
+:108A4000A1743D8E57C6FC76A582B146FCD70BD7E4
+:108A5000CE8629CC01D78E557F511DF8BEF9A36E65
+:108A60006BF4FDBAE75F793104A8A97BE119871798
+:108A7000AE9F753DE560A534DE7D9614C634BB66B9
+:108A8000E88FE35E4CEB3B0ECCCB980BEEF35BAC8C
+:108A9000A963059FAFF35F4E32848FC138126E58C1
+:108AA000DF67F88F87B151CEE48C4FAF81FF47B2BB
+:108AB000919754B86E4F67ECBABE788AE22BC4E93E
+:108AC000F9DC179B43809F33BB3EDF8CF0D7FFFD63
+:108AD000AF9B7F08F863AFDA9C4FC1BA9B7EF91F4A
+:108AE0000EA4AF7C6F9A53A1F7CEE5B19007FA9D23
+:108AF0007B2F211C825BE75E3999EF85F59EDBF9C0
+:108B000095CB0BFD17BD323E0BD7BFE8D75559CCDF
+:108B1000DE3F1CE79630164ED0C315263A7A77C34F
+:108B2000A059D0DC2BAE31F4D8DFB93F1FE13C7B3C
+:108B300034C1978078827B8BCB913E40A7A1BCFD4E
+:108B400020E0B771C78FFEA20E8D87E7508EC98DCA
+:108B500074FD7802C2C9582487B911BF3DAD4E7B60
+:108B6000DFFEBDF43A02F4BCF61BD06DC70A3E6FBF
+:108B700007D0CDD1976E67F11FA04F13D22D294A90
+:108B8000B72F58F0E79E226877A6135DE3E12BF23A
+:108B90000DF055ABF0F16F70FA7FE044F9D995D440
+:108BA0004BAF2948AFE7BEC86740EF53E69E7BD87E
+:108BB00070C67A5E49706E85FBF7BFF24792937379
+:108BC000BF7EC78274843FBB02EB3AC77AFFBA709C
+:108BD0009D8D8A58E7B6E44882238AF7C6F0D48987
+:108BE0005E07DD3F4EF7C39C7F117F39489FF0BE83
+:108BF000DB9538F4E87016D23A583893D6DDB0EDEC
+:108C00004F16E41B4927A48F320AE9757C02DE97D0
+:108C10007492EB8E1DCF897818A9A3DB362E877D41
+:108C2000E9DA636145F1E805F0E27B082FB4CF6D26
+:108C300049D094147E3F17D671CECC6676201C6145
+:108C4000E58FF1E8CBD8325ACFB3B17229D6772568
+:108C5000B9BC12DCFF285E9E703A697C899F335F45
+:108C6000C7D7CF8750CE01FEDDF6E041E41FC6AC8A
+:108C7000E11330CEBD4C61294551BC4978CF688C99
+:108C8000F4EE995FAAE110ACBFB5633FE9D958F99A
+:108C90008675F93BE2CCF747315FE3EE7D43510F38
+:108CA0009D797D0FF15FE38EE396108C7368FB0B6B
+:108CB00096EED228BFA3FE0EEBF4F7995FED1B4AA8
+:108CC000FA16C78FA36F4E88F19BF61AC76FDAF1B9
+:108CD00017C3F875A10E8BD37EE5793ED3FC3370B4
+:108CE000BD9F759919EABFCF3AD489E138F3BE29FF
+:108CF000EC97C453EB3B16B263C3DF4D0C27009EC9
+:108D000016BD33F14F291978B57801B5AC7329E751
+:108D1000ABCE87FC394897CE77EE52D19EBC88788F
+:108D2000BC2A3A6EC591E6AA6490DB8A6381E1C8E9
+:108D300056B1FA60E45193016E98270BF5F372185F
+:108D4000C70BE330CDE70EC0B8AA63C244844775B1
+:108D50009A9CB6B876958F67B6075810E03283DDD7
+:108D6000F6EAF8C93DCD3194A5E0F23C26D40B0BD0
+:108D700081BD503FBB2DAC4403F89829D1F7148C2A
+:108D8000BB70B0BFEC20B417CE71FB42F0DC731B9C
+:108D90007FEFACD31E325D8BEDFC30CA51D24595CE
+:108DA0007941F59D51DE9ACB40252409BECAE94898
+:108DB000223B93A4793754433BA956F30146D92764
+:108DC000F6605E6A26BE67A1F73CA98AF629AEDB8B
+:108DD000C11C286F727CD94F8ECBB4C8505C3FB396
+:108DE000328D815DC9651C6E55ACA7887529C8DFB9
+:108DF0002D531D5BB1BD29B996EC7F3EEBD9E7073A
+:108E0000BA3DE9987018F518FC6BC27E79CD46FB27
+:108E10003E60B1B15D10D262E4D76B0A00FF15B5B8
+:108E200019EF6754552E18E063EC9ED4CE891AE8EA
+:108E3000EF8C19953B7300A79357BECBDBCF5496AD
+:108E400079A0FD1F6B1A2669A047327E5F59960FE5
+:108E5000ED0B69DF9F44CFEB0049D783EA5F3374A2
+:108E600052A8342AB79900668A4AF27C23E2E16C60
+:108E7000E04C2B3E6D98FEA5051EE15F00F190379A
+:108E80008AE321D77E6C2783FE034CDD4B912F7F35
+:108E9000FECAFF4AC57E5EE6A4F53AD972E7A75638
+:108EA0005C3C1B7569D8E5F499C63E957CA846E5FF
+:108EB00020C515BC3515F8AA7556C98609A86BEBEF
+:108EC0007DC45F30B393ECA1ECEFCC20FAD408FA68
+:108ED000209C56E0B339BC0BAB65ED420F8D73E2BD
+:108EE0003C4AA85EBD74CDB7876796E49B64968CB8
+:108EF000F7B57A2FC1D595E99F83F8FA2A334857F9
+:108F000079DF3D6BA63708F8BD3135300FD7E199D1
+:108F10007B311FE19F92CA68BCAA79763FDAD50BF4
+:108F20007B41FDC5912B79DDBA84F9B441FD3F9FAA
+:108F30009616FC2E8E5FF89A77D76118EFDA1A8BA7
+:108F4000CF06535CBB78B84F4B677C41E87708BAD3
+:108F5000B991962877DF636194BBF3098ADF0FED3F
+:108F6000F30F38492FE7D64C398CF6EC7C52414749
+:108F700004EFFFD04BF2081E8082F290B7372562D3
+:108F800073103F7F19C3CF5F1AF9D738EFF94BDE63
+:108F9000DDDD349E538C070E113CCF13743AAF7253
+:108FA000BFFCFC122FC101EEE33EB4B7DF74BEB5C7
+:108FB000A9C24F12F479C8E65F87F400FC6FD0E3D2
+:108FC000FF67FDD37133F6033AD235968E73ADCD7C
+:108FD000F9A817EE0F744C008DCD4ECEFD5E053214
+:108FE000F7D4D4E036EC5F3FB3EB9099A0692E46FE
+:108FF000B9ED4B6785F4B96BEF7D4BCDD06E423A3E
+:1090000079FBD2F3DAC56544371D7D3B70FC6BF705
+:10901000FEC584F04BBA6E50B81D887DFFE55445FF
+:10902000CC5BBFD40CF8BCB0DB42FE6F6CBF83A935
+:109030005EEA27DB43AD153E0DE434CBC482F1C6B6
+:109040003DD8675CAB2F210EFCBDE339F97880FF7A
+:1090500037F4F8FF6DFFF8FF9DC0FFEFBE25FE8FD0
+:10906000209DFBC3BFF4BBEB847EA863ABC9DFFCD0
+:10907000C43FCD3510E69FA0DA491EE63FA5921CFD
+:1090800042FF291E57549FCCBFAE791FAE77FE1307
+:109090000AF16D4D90EBF9CFE74E3984FA7D4EBB66
+:1090A000D17F9A3B33644138E76D34DE9F1F8E8950
+:1090B00007994EAF035F9C89F2EF00AE77DC642F17
+:1090C00055211F55F34A53D05F7AD5ECFD3DF9E3A6
+:1090D0006FAA6C6B1CFCE7A715903D96EDBC664033
+:1090E00092CECEB31A9B09F5A51C77DCBCD22CF42A
+:1090F0006B16267B2F1B870D586CB4EB05A144E63D
+:10910000D58D5BD49666680F6ACF36F4BF6A63A1CB
+:10911000E1F9E0F0D586E7D76C2F37B487745C6F40
+:10912000E87FEDEEB1867659E41643FF6187A71913
+:10913000DA23BAEE32F41F797496E1F975DDF71B84
+:109140009E8F3EB5D0D0BEA1E707463FC6C4484F6C
+:10915000B24485F4E68125A72A4E20C30D57C621C7
+:109160003EAB46F1BE0716584C4E075E8B4D4EE0A7
+:109170008FD7E74C213FE0C00297DF4BD70A3FC6AD
+:109180003F4C1D333C18C7CF1DEF3C5D7142376F1C
+:1091900095D56CD073E39DC6F6B034113F0CE07CDE
+:1091A000332ACD285F6AF39488059AD9F30766E1DC
+:1091B0007C2067A3D3B89CD1F58A72E668AEC0362E
+:1091C000C859655A1C3963C2DE560A7E82ABDF522B
+:1091D0008E8C954C76D98F37BD743FA441BC32D666
+:1091E000EACB3D88EB32F9329009C7CD0C1CE0E3A5
+:1091F00009FBCC4A4CDFC63E4B39779BBC21B26B96
+:10920000698CF24B8FCD294E613AFCDE956612FADD
+:10921000A09DC791CEEDC33489C742FDFD8923B41B
+:1092200092E87D65DE942C943B773F7AD1E22E1A4A
+:10923000BC0DF4B1C553405779BF75A66962380EAD
+:109240007D1BD2789C21FDAEC151BFAB01F17BD615
+:10925000FDEEFA4180AFC6EA1EF2BBDCA6F605873A
+:10926000705DBF5179DE0C3C2BD40B73841F3D67BE
+:10927000D24F171C02FD34E7ED41A49FE43C9B96BE
+:109280004406EBFD86DC7EE2AAED029ECD4BFC831C
+:109290006B06115CA41FA49F9E1F6A9880F1CE00EC
+:1092A000D64C71E37A13AB8D37CE0A314E16921C31
+:1092B000E175DA494ECECE3DE6D0601D89C9C115B3
+:1092C000C86FB3AEEDAAE0FE98DF370DF8273F7206
+:1092D000F77AEC9FEFD65858E93B7F5675B0AD0052
+:1092E000D6B73CCDE4B353BB47C1FE090F32960E4F
+:1092F000FD97FF5D257896BF7E1DC3782DC1DECC1E
+:10930000D0AF95EBDA9FF638E147ED4C223BC8D061
+:109310002505FC7D57D0FE0B774D17FA1D5FAC3548
+:10932000D37C5FC01A9D30FE179D6A189DF7436974
+:10933000891113B4D5B664B2DFF9E88342FFB99D51
+:10934000C9616F41142FDAC6312C02F62E2197AF76
+:109350007F799A3D6C2FA075AFC1754B38E5BAF394
+:10936000FA89432369DCCE327F8981CE1E88C9BA4F
+:10937000706E0D9C7F18475D6BA638714EAA9DE0FC
+:109380000C2F090DAE31F75D5FAB7BDAAD77023C98
+:109390002D4754A6C238DEEE76C2C75CC047D8DB84
+:1093A00017DF67BD055F9A54823B82FCA86E9C4024
+:1093B000EB62E8D7C37B0D3F57D8E305C897C18957
+:1093C00044E76C137BAAA0EF3ADE48E3F9DBC369FC
+:1093D0004EBA5ADCC55C4EDC03076F83F1DE423DBA
+:1093E0006565F1FC80DFA7717F9AAEB1FA09EC6088
+:1093F00008E1B8B051217A9E54C21633A0ACEEF603
+:1094000066F207A47E52FD2AF91F524F49B8408FD9
+:10941000BD9FA6B38F6ACA834371DCFEFDB59DFB79
+:109420002CE8AF3919F96B528FF6E7AFA19F86FC94
+:1094300027FDB45331EB84F57D2ED6F779BCF5F5D5
+:10944000D1BF77354B3FE72F6997F133332DF1F5D6
+:10945000D355E99C0E4D4E0BA3FC14C6CBE83FCC74
+:109460003785B7621E4A0BDBA6EAF0939D2EFD3CC2
+:10947000EE6FF4A7F7AE149714AE2A25FD7BA1CBAF
+:109480009B9206D78C8F95E678E3A88B9F1D8674F8
+:109490009A6FAB4C4A07389DE9467C3DB6A28FFDDA
+:1094A0004A4FE7F8A36B1FFCD9017F26839FF86220
+:1094B000B197F0E749BF8C9F78F6B60F2BD02E9D61
+:1094C00013786AEC8D7BB99ECE06638579AD06E68E
+:1094D0007FF244096F5F5268D783F2759BED81413B
+:1094E000387ED3EE494FEAEDF7D7693C9FC6EC6969
+:1094F000946F95E3B984DE8738FBC64FBCA4FFBFE9
+:1095000044FA46E3EDEE0A8CB75A7E7D550AFA67B7
+:10951000E35EBCD389D70B190309AF675F4CF02317
+:109520009C67D3401FDBB13DF210E6213E5F7238ED
+:109530004D4F97B3BF7AA7C20CE39CDDF54E8586ED
+:10954000F90C91AFE9B54797FE501180F743635985
+:1095500049B35DC727566E2FD6DA78BE23D3656927
+:1095600065D7423C92994AEFAF73997E8CF755EBE1
+:109570001FF24FA09CC5E477D69ABD2D76E03388C4
+:10958000E57CB84FB070B0DF3307F33B53DD949701
+:109590006951B81E0DCDE1716846212B2980F1CCAF
+:1095A0002655C5F77A3CCCB715BA241C688FA0DACB
+:1095B0004BECEAF023F8C313D3089FA3CF38158CE4
+:1095C00027643E48ABE2E3F54CB784B7EAF240EEDD
+:1095D000991AD9C524AD83A19EBE2F338DE097F98A
+:1095E000A0AA6933039508D7C3268A6740F12AA841
+:1095F0000F73C43A0A3CBB5648DF4673215B324CBA
+:10960000FEB055C0FF0301CF0EAFC98FF957476EAB
+:10961000E4A819FCBB9CE58C7DA4F323932C42DECB
+:10962000DE5649DE92BFBEC93A13FCA3A4449E573E
+:1096300075045A17605E1CEF7FA71CE9C2DF27FA8A
+:10964000A898A662A11400397994715C49BFCE250F
+:1096500056DF4060E85D4B9C747D7A899BE0FAE9B7
+:10966000122F5D7FB2A484EEF727A757BA3EB2044B
+:10967000E6D5F153C648C00AAC37436524CF8F8C7A
+:10968000A8489915C71F90D7C7971C768D1B241023
+:1096900008F4C8AE776E59594074462182D5BDBDD5
+:1096A000C23F86B187CDFE050C586B4DFAD7E3302B
+:1096B0006FB54A31519EEAA7E96FAC08E5E2D54B98
+:1096C000744FDAFF1EC37CA76778BB82F2EEA96FE6
+:1096D000273E18DED5C582E2BE1FDA9E23FCFEC3FC
+:1096E000368EE7D58C4D4478ED0A0BE0F59C8DFB6A
+:1096F000839FDAB87E3C2DAE43D2839B518EFFE62A
+:109700003C5AFC3080672B7D3F1FF73B92F67F452C
+:10971000F96075A8C58AF2E1D97B9CF6415453B72C
+:109720008581497EEDD13F537E4DB5040A78FBD744
+:109730002BB19DE9086C41978D85FE3CE9801BE4C7
+:1097400006F9E17AC24608E578954DB443C7080F9B
+:10975000ABCCBCFDDAA37FA275AF3207E6235EB0C7
+:10976000BD1CC65B95DAE13641DBBEF4BD15876FE3
+:10977000C0B6ECFFDE8A10BCFF52BAD437010FEA44
+:109780008FDEB613DA43746D8DB799955FE5FA1ADB
+:10979000F67F752807F8B571AFD281A079F6AE5182
+:1097A000709D9EDD6B08DFF407F281CBA03CA935EC
+:1097B00064C1F79F5E72D8B91CE8ACA5B5B910EFCB
+:1097C00057B9837E7FBCFC44A6F47FA1BF3ECF1671
+:1097D00036F774EBFC710FE372C396837E88E35F08
+:1097E0000CCDAC3C9D01E3AC55822B55D433CF99C5
+:1097F0009DA8475817D74367C4582C9C4DFE4DBDB4
+:109800008D37CDCB822B07A39EB85BF361FC5C57F1
+:10981000D05E89F6BD6E4F816F298BF24B5D6A87F2
+:10982000AB1CF927D5D86E117997ACD4E6D4D452B5
+:10983000DC8F58938FFB058DACFD9E1F20BC6FA95C
+:109840000CFDF4D3FBAE4B190DED0668A3DFD0D0B1
+:10985000F98E05F9F3D10CAE3F1B3B817F609CD59F
+:10986000205F7E7064B668CE44D44F4FFB9BAF46FA
+:1098700017EFEB47FF6B920DE8FB4CA1DF89F47605
+:109880006798575AC1697CC6E21CCCCAB06D27FEE6
+:10989000AA2B33713962F6DFF835B1FF09EDE38F9A
+:1098A0004EBA459FDFF5E0BE0CE0B969933D644ACE
+:1098B000217BF3BFD1DE366E3485507F99AC5D16C7
+:1098C000A4AF1BF776893E4EC2DB22A9CF63F4F525
+:1098D000A24969B7607BD1C385CED065F297B51731
+:1098E000935858E71F3D9AC1E5B8560BD13E4AED53
+:1098F00045073DFFE7CD6763E161979BCF4ECFE51D
+:109900007CF5D1F988AEFBCB7FB37E20D06DD14EF4
+:10991000B32941C7778B768AFD6A9B3F0BC7C9B4D1
+:10992000308177F0F701BF5A416F3BA4819C3FD251
+:109930002BE703568E1B83748B3E67A30C7AC08F74
+:10994000F1E62389520F5C15BF7F624CFF42D9F6C6
+:10995000AD1C97DB179ECCC468DB0AFDB5FF4EE853
+:109960006D237C6B4C31E3A5C9F947D17892AF8E5A
+:10997000A757FE2634109EA7B65762FD46CF1CE6B9
+:1099800045BB8CFCEAD3E9FDE3E95CAE6B2F16190D
+:10999000E81DC57BB1E1FEC9256EC3BEDFBCEA454B
+:1099A000B43F791CF53C8EC3421457D56ECA616131
+:1099B0009D3FF5FFE1F847E118DD0F1C37FE0FC3AF
+:1099C000516090CF281C030DF7FF5138B6DE517C53
+:1099D0004B017459A784AC8568171E3251DE444D83
+:1099E0001DE75D8AFB0F0F69E4E7A14B82F51F8538
+:1099F0001A3BAC95A3FCB4FB31CE67CB78FE08EEE6
+:109A0000B799CBC90E911F5CB437E13EF4D30A6B12
+:109A1000FDF3F1CA724B697F43EE0B32910793FB62
+:109A200019839CAC5203E76D74E67D64A70A03D5E5
+:109A300075E8CCA9C9C313D13EAE338543385FE87E
+:109A4000A77CBE4C53B8C38ABAD731D089F62ED37F
+:109A5000C1F51F5B594AF66FABA9F0EA0500C7C311
+:109A60004A65E29B88E7D442CAFFE2FD85707FAB7E
+:109A7000B05B6AAACF89766AABB05B2D42BFCBFBE5
+:109A8000496981FBD09F3895B1E816EB75A887FC32
+:109A90006DE9606F4E662C5AE9F6A0BDF1165AC109
+:109AA000BE9C5CFB00D99BAD4BBDD9CED4687BD0AE
+:109AB0007F83B5263DF1C04AF45796DB17DE8FFE53
+:109AC0000E3CFF8D15F4EC336942EF88E785BD7AD3
+:109AD0000AF412E83175696F3B847AA9B057EF3CFC
+:109AE000407A67DB6695DA6FC37CE8FFC03A422AAA
+:109AF000AE7790467EBD0D604984B66D7021ED1342
+:109B0000C1BA5922FAD783F97399CFB70C32513EB3
+:109B10001FFB231E6D1EDEDF3295F9705FCB926C4A
+:109B2000A73844EE0FA8629F2A51D46928CEA91401
+:109B3000DF5957972FC478CC3AD0B80F6B89A9E773
+:109B40005063EB3BEC11F2BF4E6788BC7E3A735F0B
+:109B50002A8ADE07BD5D8E57D79DCB2B11DE85C9C6
+:109B6000CCA9625E2518A17DCE58BB66053BEAD51F
+:109B7000C987D5CEFCF1EA090E65723FD67E51A3A6
+:109B8000F866AD02FE0DDAD164CE67D23F323B25D6
+:109B9000DF1AEDAEF497CCA97C2D8B268DCDC2F8C3
+:109BA0005DB5FBADE8E7EC7396535E4065BE5B2B9D
+:109BB00075FECEF2C824CABF694E3FF9E145224E78
+:109BC000549D3EA6F7735A9740607915634F56141B
+:109BD0008F457978DC16B116217DD79928DEDB5FB9
+:109BE0007E7F48C1FCDB624672FA64856B2CE6D14D
+:109BF000B7688194BB515E8EC07C5E4E37BE9FDBE2
+:109C0000A260BEF80B6B2005F5C123C8F73ABC3C37
+:109C10002FF0F1F70CAE7F1E3673B968057822007D
+:109C20008776F11ACA6FADC9E4790F4BF538CAFFD0
+:109C300058001F98DF4B60CD2127AD97E7EB12DC72
+:109C400026435DA0767128BDFFF70C9321AE6E838D
+:109C5000757A75FACBC64294AF431C3F15C77F791E
+:109C60003B93C72356F087BCE49FC4EC73F7F58F92
+:109C7000C85F91F4E9F55314F04F2E138F3541BCB2
+:109C8000ACD7F74D5A0FE9DF268887F1FE39A79543
+:109C9000FC4359F76017FAACD51D6C1F8D7C9EE80C
+:109CA000188A79008D7510525663DD03EA43B7D6E2
+:109CB000D3CBFF20F32D36C756ECB75CD44124F943
+:109CC0008CF293C8DA237E94CF129DDC30C477885F
+:109CD000C64DF01AEF331664186768EED83A89500B
+:109CE0006F3D14D5F369EC31DCBF967E6F8EA847CB
+:109CF0003A9BF421E5D1C0EFAD4CA77D801E8A5B75
+:109D000064BEE7DBFAC9453806E61116FFB5E20482
+:109D1000CAD9D40905783F49E37C02AEB896508E83
+:109D2000E1D584F9A9B0FE3B85FDCB50DBA96EE4FB
+:109D30003511CFFECD39D3437114E093EA6D127D16
+:109D4000DD142F0A3F4DEDD58F7F5EE137FA9D215F
+:109D5000BD9FB76ADD9F572CE7F10AB55F7B3442A0
+:109D6000FAF3619B6CBF4C6DB073118C97D88B0963
+:109D70005EE44378DF8FF2C6EE28263F5B2D64D980
+:109D8000888F710E2BE94DF5C584ADE807435CFC67
+:109D900052BA6EBFF86CF2D17CF487E38C17328C28
+:109DA00097FFEDC683F93BB11E473E1FE7D8185118
+:109DB000F97B5E7C8FE5767D1882F1D7FD3A81AD27
+:109DC00004143E6E36CABBBC6E15F28CFA465F0FA9
+:109DD00069A9AEF123534BB94E7027B2888E9FA468
+:109DE0009C6B1707B3884E4E8A32F9BEAAA6F92992
+:109DF0008FA45D2CA5E77F4799A6799C579827AD3E
+:109E00009F798691FEE87F9E0AA15F98D8BFD2A86D
+:109E1000AE46EA85FEE43C769F2C562FCAABD48B27
+:109E200059997CFC7D99C6FCEBFD1B3B0E210B7DFB
+:109E3000660F1EC8A4FAA8630E34E1F5A6C850E464
+:109E4000E34FFADE6FC4C5BD95CEF3FEC5DB17BC8C
+:109E50008EECDA9519FC02FDA0DF648AFD4937D843
+:109E60004315ED1DD88B52CAE77E9181F9DCA077AE
+:109E7000C37886F27407E573535C81521CBF755A30
+:109E800005E51C24DCAB96F03A35A967ED5A90F055
+:109E900065D542FCEA0C820D67EC42A679B2A62099
+:109EA0003EB91C1D5D7781E4C0A6F989AF6C4E9365
+:109EB00017FD021BC485A877973A4D7CFFC66DA598
+:109EC000FC7FAB021122E88D85A98597DD1FB75C69
+:109ED0007491BD0548DC7ABDFDCF9F2743D807E3C9
+:109EE0003C9A93FB0D6C3FB7C388848F75FA58FA80
+:109EF00003B1EFC58E2FF129F16B45BC96923D8CD5
+:109F0000EB6FD85CC6FDCC2CA96F338F1647E06E83
+:109F100083D2ED40BF06F4A8CD857A7A488FC3E49A
+:109F200025FDEBE27E5048F035B3EBF95AE6A9E5A2
+:109F3000BA24FC0BDF9C63D5EFBFC4C21B6B67ED7B
+:109F4000A5C6BA059BD758B720BF0B50B500F18DF9
+:109F5000798CDF8A72B2D459EE443F67B9E6FDA32B
+:109F60009FEA2DCCE46F83FF6E985F5E1F01F94777
+:109F700038CA5C26435D8DBC26E33E4A9CF7A6BAF0
+:109F8000B89E7A64DF9DA487351FDF678AA51F63AB
+:109F9000EDC42FC9C5CC49F95301AFE30AE3F6C7B5
+:109FA000473FDE67233F591B650D635D67EC7CAA65
+:109FB00039E05750EF9631F293D53C3EBF3A885185
+:109FC0001DB863781A2BD1E1B1D53D8D9E2FCC748D
+:109FD00032A4B79A6C0AC4E31789A7812E93816FC4
+:109FE000DC926F3CEF17A31CE8F826108F6F06BABF
+:109FF000B8BE4238F4F46D751766C5A34F542F727E
+:10A00000BEBA125FCC4AE27E4EA785EBCD06C411E4
+:10A01000C44BF5999656CC7F9FB1F2E7CC5FC2FD59
+:10A02000322BE7B95949F961F4873A357F12FA655D
+:10A03000B37AF76DFDF4BD47BDCD9F721DDAC777CA
+:10A04000B8DF7CB2D2DEA6C03827CDFE14C4F7C973
+:10A0500077546529ED83F3FA39598774D2EC5D752D
+:10A06000353C9FFD33D5BF941E1BFDC133CC3FEC67
+:10A070006DF48F77ABB4DF52F0D3FBD421D0BF06A1
+:10A080001C45E4A75955F610DAE1CEF79B3F447D15
+:10A09000347B73827719D6B16C1CF625B63F5D9D73
+:10A0A000EC4DA03C5BA1E2C1FCD79A0227ED9B2CB2
+:10A0B00066229EBB7D7215E8D05FE2D4327F0D6BC5
+:10A0C000FE94C9E7A155E3609D5767769AEC00932B
+:10A0D000B221B4CA0AF47B7869C08DF163876BC67C
+:10A0E0002A8C1F5D2E7FD74D102F9E70DD3919DB16
+:10A0F0009D8FCBF1EE5AE507BDFCB22958A0C0F305
+:10A10000A4AC072653FD6A911CBF959ECFFAF95562
+:10A110005F1E85F1CB366C9C8C39B78A6AF17EE87C
+:10A1200009826FCE18D9DE9A543510DE4F62863C14
+:10A130009A391A8F529EAEB3D7BF7A7A32C69FB37E
+:10A14000C736576930FEB20D3B569582888C6CAF8E
+:10A1500074FAA1FDA30DAF4F4E027EEB64FE3A8C64
+:10A1600077576D3830D97A038C9F6E1C3F4315F9B1
+:10A17000D8D0E15598C7EB858FBDB7CA3F30DA7F9D
+:10A18000983B61752837CAFFFF2AF81FF8FD572E44
+:10A19000DC07B4761FC2145DFEE21E0BAF7B15F523
+:10A1A00029B9DD4379DD8D689774F33A65D976F383
+:10A1B00076E7B2F8F6FE2F6E2E779D89F19F7F2805
+:10A1C000F439C0EDC7FA9594A3CCBF238E3C1D741F
+:10A1D000D949FE0E82BF674D8BCAD5AD20DBA3B037
+:10A1E000FEC7CAE194E3C4BE7F4CE82716BA350D1A
+:10A1F000F9788AE0F3229FC2EB7876278507A1BF22
+:10A20000C722DA6DB09EED229FB1DDC6EE9D0A53E6
+:10A21000BB12597027FA9FE9D02EA5F7FD3BEDD16F
+:10A22000F1DEE2A2CCC61705B6E178E3B33C652DBA
+:10A2300005D17100EEE5D67203DCDAA8347C1ECAC3
+:10A240005E50AAC367295F07F009E10BA679F626DD
+:10A250009097CEAEAB0B57C21256B9BC86B8AFA220
+:10A260006B1A7D97F29F6EEEFF302F7F3FB38AD738
+:10A2700085F4EC49A23C05B37615239DE47B1705D4
+:10A280003EAA7E346503F6ABEF3233AAFFDF59797D
+:10A29000597FA01EF37A3AFFB15E8B503C578F79FD
+:10A2A000BD6138DE5B16B463388E57E4AF312F974B
+:10A2B000D9129FFED21ED65F4C65A1617DF56674F2
+:10A2C000FC0C7A7EA57545C733C69D7DC7B3887DD6
+:10A2D0000081774DE0DD121FCE0159824F01DF264C
+:10A2E0001D7FCD11FC06DA93FC80732F0EDEBAB20F
+:10A2F000403F2FFFEE06F4F3B337A1BEEC4AA4B8FB
+:10A30000A542F34FC6FE155D69B4BF20F943F2853F
+:10A31000A46B675A33E56B7A1E53C80EC6C2552C20
+:10A32000E1DAA8101C59D541F53E1D7C521E60FC97
+:10A330004E31FEF051243F4F707900B9B91BE5173B
+:10A34000F72B711DBEEEA1D386F485FF2768FF466B
+:10A35000101D39FE7F6D13F51C1C6F7DF19F730579
+:10A360007AE6D3F38AAED7699DF5FDC8ED5B6E073B
+:10A37000C1997534E2F042BF4705FF77767CEC184F
+:10A380008D72B15B658A97AF1BF55685D4C76CEEAD
+:10A390005B6341FF65F5B6415F7A910EBDFA3362AA
+:10A3A000B546FBBFE29E3B65393CCB48E0F29AA143
+:10A3B00082B5298FC2313D8BFB59A382F1FDD27743
+:10A3C000DDC9F45CE2FBB1C555EC6358DFCF5C7CC2
+:10A3D000FF7354774841BA48B98ED5538BB2B83C15
+:10A3E0002EC8FA7FA4A76C57D05336A9A7F8FD83CF
+:10A3F000101C613F97AB7BA802FE738DC9EFC2387A
+:10A40000ECC43B3FA0EF38E689BA952158B7827675
+:10A41000F36880ECCA697CC8EB571EC218704EBB4B
+:10A42000B17E856DE3DF89C6F255948F42C27F17F6
+:10A4300070087B706B42F7AF7891B1519E651BE05D
+:10A440006C3415E99EDBB9DD9274007A2F6769518F
+:10A4500039FEE8C5AC2DA86F87B9795E31A3C85F16
+:10A4600086EB9772097655F089E9DE6976AE37A6F4
+:10A47000C5E1DF27847CCED9C8F9A6F3BFAA26237D
+:10A48000DE3BDF4D4B5DA6D3134F093B28C7957AC2
+:10A4900048BE279F3F29F8637B9683DA4FB99245E0
+:10A4A0009EC714F7BBB9A774F695F8A78DF30FAC48
+:10A4B00037A4E7EF616EC5605F7BEDAAC0738305CB
+:10A4C000F00BF8DB6E0E6563DD4E459789C6ABD9A0
+:10A4D0009D4CF580351D1C8F35EDFB4C753AFCC449
+:10A4E0008EF71F59DC1FD862E27544074DC06F8894
+:10A4F000773B87EFDC8B1ED29F8745BF2BDB8D6FB1
+:10A50000A667B658781D29D097EAF91A5ECAD962AB
+:10A51000D4D34B05FE832DF81D5BC606E6C35A2B2C
+:10A52000C0534401B867B885DEB1F82DF8DD6ACFB5
+:10A53000638CF6F30755FBCBBCD06E0AD8CB15184D
+:10A54000AFB89DEBE18AB5E0C7A0DC59A55D787393
+:10A55000877EBE6359C9221EE1FC5CB391E36F1094
+:10A56000F83FCFE215C6F915F9F11C9E8FD6778C0E
+:10A57000C6FC937CFFB4A0FF95E0AB40F88647E1B2
+:10A58000C3F1919F983DB00CC76DFCC3AE1CFDB8E4
+:10A590005F66717D9BA1CE1A6B433DBF06EC0E49F1
+:10A5A00067703F7E9750B337D5B992913C9B30EEA0
+:10A5B00091F3D6883C24C85DC554585A71EF3C923B
+:10A5C000AEEF3DA75FBFE6E6FEDC3F8BBE9D96206B
+:10A5D000ADA76727C0EB8DE2A5B3E3BE6536B41324
+:10A5E00047990FED8484775075B703EB4E9A84FD3D
+:10A5F00080F59A307EC9F89997B520DEBAC65A30F0
+:10A600007E8AE56B49A712C6E547C66925B84100B1
+:10A61000ED3CF750A17F18C5BB1FBDF4CAB32B2971
+:10A62000BEE27469AAE674AC740767B833A3720813
+:10A63000FABC02F555CDDA5E7DD4C1EF77E557035C
+:10A640003EAF754B3937D22523D061C37D0DC9D7B5
+:10A6500067F70C09AFE474A6F93B3B92C38A82DF2B
+:10A66000A1362FC5B85BEA0984475F8729E1E9A5D0
+:10A6700023033A0E89DE1F54CDC76B0279473EAAE9
+:10A68000579B158F427A80F2AC59A807A09DD5C17F
+:10A69000FBB1BDFC5C0489A7FA193028C49D7E7704
+:10A6A00029AD43E22BAB3A62AA875B13AD55FE138B
+:10A6B0003A7FEDB0D86F40BC4CA37883EBEB7A3592
+:10A6C000908B712BCB4AA0EF38C10E917E39686315
+:10A6D0009A0DC67B03AE6897C6AB0BE83B9AF14573
+:10A6E0000AC931680099F789A03F7DEB4D4924FFE5
+:10A6F000ECEB0706E23A3393381FC23856318E9599
+:10A70000ECA0B007BFCF07BF4E89EAE5838A42E3DA
+:10A710001CBCE19AAD545B28F812C743FFE9A03294
+:10A720003597EC6567A6282EE2F0F76FCFBAF3F104
+:10A73000B93E5EC4F82E1A6F96ADBE19786AE4C4AD
+:10A740008E88C989D2317CCABF01FCE321DEB4C145
+:10A75000FAEF137C7DB020A43A10AE41B06EB8750C
+:10A76000283158DA6C8FCEE312F91B97A8DF457FAA
+:10A7700001AF260FD7FF3FF6707BF181B8BA1CF10D
+:10A78000F33D1745FF3FDBB99E5E5919FFBBED87CF
+:10A79000845D9171E7AD62BF03E2CE87DC3CEE14CD
+:10A7A000F5A77C7F04FC7BC26FD58FAA69DFEF8B96
+:10A7B000AEE929FC3C04AE0FE688FACF7B1F9AFE77
+:10A7C00013E4B31358670E78F844F0CB09A7DF8180
+:10A7D00075520D89F1EB889F14F034083C9C5CC2E3
+:10A7E000CF2F9883FB72C07FEBDCDCCF9BD77EDB67
+:10A7F00004A4FBBCB50AEDCBC9FD7F49E7DA4DAA3D
+:10A8000021BF3E07F7E5D2FF9178AAAC9F786AB8DE
+:10A81000219E92F3C6C6551F2D711BF60166B51712
+:10A8200089F32378FFD9CC4770CF6ECB31EC23B2BC
+:10A83000B6CC6FF4DD3FC651A1B8F0590CF73F5AC2
+:10A840006265213D1CA70652FDC443EEE0CB6E03BA
+:10A850001C492C64C8878E71D2F744369E87057FC9
+:10A860009CC73170DD62277F7D22FAB3BDF930D0FD
+:10A8700023CE14D44B95FBDD23A2F18394B3FA319C
+:10A88000F1E38875C20F5AE7E27172CA511957276E
+:10A890007A513F4ABF3CF6BD777BF9D7E8575E292E
+:10A8A0000F017C1CD2C749B1E39E72FFA3F177511F
+:10A8B0003FFC52FC3F127F578C09529E8FB52B54A0
+:10A8C000D332729C311EFA1AEDFA08BC2619E2A1A5
+:10A8D0009A6A633FE6E1F69F79920C7E7C7FF8D41A
+:10A8E000FBF14A11EA413E5EA3E08B82CFDEA57AFE
+:10A8F000D2311EEE178DC8F62778E0BA5AD493AF3E
+:10A90000B6F1EFF9B7FCF77EF76CF48FDE36D3FEC5
+:10A910003FDBCDF9A6F289452D783E80BD4371EA33
+:10A92000BF5FFD97C58ABF06E43A5DE8BB7A1F5F4B
+:10A930004FBD2F621968C7FA620E476EC73E45D3F6
+:10A94000F15D6E2DEF97E7311BF2E205A23DC0E30A
+:10A950009471CCBE4919D8DFAFA15F90DDA190FD05
+:10A96000CC6E66E457670F5768FC7F19BE45995D4A
+:10A970001A5D6F9B696AA913DE6B7325F9D0FE2CF3
+:10A98000C90E5EE541F88E4522682E471EEBD23097
+:10A99000DE5A93ED2F413CC8757A556736FAF14976
+:10A9A000C7387CEDBD79266E7F185B25FCD2ADDC07
+:10A9B0003F53D961C6FD73B2F3AE65256407E57AEE
+:10A9C0005C69C28EB85870979DFAB791DF62E57ED8
+:10A9D000806B5931F9F392AED1B8737039C69D4589
+:10A9E000AB23DA2C78EFA54DA6B8E7554C10788745
+:10A9F0007554EAD77125BD25FB99FBC93B4ABE4F6B
+:10AA00009A183F9E074B48CF2B9FC8B88BE473B969
+:10AA10008561BE5AE27F4D76E0768427BB638B82E8
+:10AA2000B8F948D4297C94C8F3F11FAD7C5641FF96
+:10AA3000F281F9CCA9B2FEE1AE5FACFA6BF4F2BCE4
+:10AA4000DC427491F14A141E9E8769F070FB7428F1
+:10AA50003B5083F46EDCBD86E2EAF9DB8E5B2EBBF5
+:10AA60000FF10DF1A6D4727FBD7EA695EA992A9FBB
+:10AA7000D088EE75CB2DB46F58BF63277D9FC61E5F
+:10AA8000643E94FFFA8E9D4A0DCC5BB763A73247B4
+:10AA900087C79CFA30D56F5F952CF72322E44FC708
+:10AAA000F237E611D07F3964E3F27FA6D21EC2FDF1
+:10AAB0008933E6603DF63BE349F2E13EA6C4FB1B69
+:10AAC0003B6FA6F30292772544F0DA66DAEAB642E3
+:10AAD000BFB6AB2D3EE4A735D9C1154897342DD06C
+:10AAE00089EFA76624FB707FC39BC0CAC97E7F43E2
+:10AAF0003C8C8CE18B910F72797959E817F8A37A25
+:10AB0000AA273DDC2FC7ED25D45787CC7C1DBB1869
+:10AB100087D7E4F16F443AB1C369346F767D44C19D
+:10AB2000FA8BD879A37CE5DFECC9FC3670765850F7
+:10AB3000CFD7097D53F9C436E5631DDCCF79548244
+:10AB40002F7BC71605F367F09CF40DF46758EF945C
+:10AB5000BD83C7AB75F07C8E4EBFC875C4D1339D25
+:10AB6000089FFD58D701AE67227CBF40C01B4BCF6A
+:10AB700088C74BF34F007781EE5B4225182F1F2AC1
+:10AB80004CA4F1A4DCC7CA69C4C3FDCAEC4DDB14F4
+:10AB9000939DF655C8BF94F0C97E23B2C71EF0102E
+:10ABA0001EBA080F0D9B345ACF784B60E0029D3CD3
+:10ABB000BC2BC67B7DC68774AECEDA7F7F87F8B1AB
+:10ABC00001E26C8A33DADFB14C473B13FA858AFB2A
+:10ABD0006093B98BC2D68B73A72677723DDCD0B950
+:10ABE000539B6D8FF269C167AFD379550D1D090C69
+:10ABF000E32BE0BFA3084F2C9F4AFC483DDB1F3DE1
+:10AC0000411FF1F829641179BE6001C63F524F9B84
+:10AC100084FC333BBFFF855857947F829F790C7A21
+:10AC2000D6467251F059F9EB58EFD9E053E8BC8E93
+:10AC30008C2A8E4F3D5CFA7830564F623E31C0E32D
+:10AC4000FBFC69BAEFBA7AF5BD78FF22D29BDB8DA7
+:10AC500008BFCF0AD17E4BF863E937309BFB6571A3
+:10AC6000F84CC91ED1D79E493B5FB0799786DFE586
+:10AC700048FE998C74D7F18F33DB42E33AB33582C7
+:10AC8000677D25DF8F5C6FE6766CFD522BD567BE46
+:10AC90007127AF174BBECB12C1EB41D3AC7A7C7E90
+:10ACA000309BC3D1665A46DFA9815CA66613FF3884
+:10ACB00018D78F5C1FAE7D81EBB3FA909DE2DFFA6F
+:10ACC000E0ED35540F9061F3611D2D0B1EB04C4F1C
+:10ACD000EECB57DE5DFB2C08FFE40E2E7F920EA01C
+:10ACE0004F89BFA43C48BC46F11936C893A487A934
+:10ACF000D79F0816707F89C75BA5E23BC25AABFF9E
+:10AD000090D98B710CCFCB968AEF09655E7696A0B1
+:10AD1000CB667BC087EBEC9397FD86F142DDE2DFEB
+:10AD2000527C76BFFB4DBA4AB985B8D620DF3709C9
+:10AD3000BA176773FB3E219BF34DDDF00E92CBBA41
+:10AD400013CD24CFF6895CAFD98FC5F88FEC11A154
+:10AD50008757D37BE3933A26E0BEF2F89F2B4E8CC5
+:10AD6000F7FB83731E7E8F8571DFA6FD8EFB10BF00
+:10AD70005F43D4A1FB5E67463697AF33DB01E1C486
+:10AD8000EFCD96CBF9E3571A8F458E28741E88C0F5
+:10AD9000E5991D55D77D82FB40DB537CF8DDFDE74F
+:10ADA0003B6EFBFE2700F7996D37F9D04FC8680955
+:10ADB00010FFF464DA7C5B799E7622E6B19676EC3D
+:10ADC00077E0F73DA79FBDB61CF576A380F3B317D8
+:10ADD000D4C5889765CF3C7F233EAF0B2BE9E8BFF6
+:10ADE0009ED9FEF3BF67C338B5DB9AF0A431D6F223
+:10ADF000EC6B141798C25BF8FDED29E4E79E7E72B8
+:10AE0000CD8D88EF968E167AFED9935BA8FDFA3326
+:10AE1000CFBFFA5FD0AF3EE0A0EF9E3F7B611FD176
+:10AE2000A53EA8517D7A7F7CBD7EE73EAE2FD1CE78
+:10AE3000A31CCCE47A4CF2B5E4DFD3CFDC7B9DDEFF
+:10AE40006EC8FB6D229FD396C8EDC8E7426EEBC675
+:10AE5000DADBF0FAF973363A9FB3D1D25D8C717EAA
+:10AE60007D29E78B07053EEA3B16981BEDF43E8DE6
+:10AE7000F39F20EF781D02FC897560D06BDB25AA5B
+:10AE800067FA15F5877EA330DF33A3FA38FFBEB328
+:10AE9000B4D95C47703ECB9FC3AAF5CF2B16C58FA4
+:10AEA0002FD767DB0DE7AA65774ECDF5921E48F0E8
+:10AEB0000DD2F9BFD9B5C19664B87FCBA2A00FBFA0
+:10AEC0008F7FE9D4BB13F03B86674A9461447F557A
+:10AED000E1762E64A7791A701F09E28FED424E20A9
+:10AEE0007CCDB81ED6335E6319F889EF78C68E988C
+:10AEF000492F3C45E3839F43FE9BF7B5194FA1DFE4
+:10AF0000B3DE1CF48CC071DA847DDCC6E187F79D6A
+:10AF1000F6721ACF793DF7D717E27BE7974EC94013
+:10AF2000FF1EC6ED32EBE231E0C87CB48F38DE7034
+:10AF3000C4D3C4D04CB2535E0BAD4F9EFB09EB1F84
+:10AF40007AF790A87CC6E69B503F617EF85076E584
+:10AF5000BEECCCE8D5D54FBEC69C03CFD19EE5F85C
+:10AF6000E9FA4DCF117D7DC6396EE75F3E4E7CDB41
+:10AF7000887C8BF3074F18ECBCAC7759BFE738F1EE
+:10AF80006DCD6EAE8F1B77575A30DEFA7C899F7D70
+:10AF90000C8E6EA3E0BFF54AF75CFA4E6C8F8DBE47
+:10AFA000FF3B27F9B3FDF8A7A87F0A777B289F709E
+:10AFB0006E0FE7D3832613E5010E6EBD664B8BD271
+:10AFC000D7AE82BF4D72D2D8CC84BFBDE85DF4CF7E
+:10AFD0001A6A793D7A630C1F156CFEA815F92515C0
+:10AFE000BC63ACB3017F66027D3F59CF46A09C662F
+:10AFF0008FF3EFC9A17D421E9F67D7823E81F62D58
+:10B0000019F37D78E455EA38F08B91FF326EF061E8
+:10B01000DE6C7D5E472BFACFA1F18CCE575D6F6E53
+:10B020001F8B71F0FAF15E276012F0B68DFC6B5643
+:10B030006211F6AC86FCF246F7777C94D78E95FFCA
+:10B040003D4BC9BF6BF426FAF0BCDBC9BB9585DC70
+:10B050009FB13384BF11F08BEDC9E1D16184E7ACBE
+:10B06000C09FC4E33973179DBB7BEED709748EE193
+:10B07000E4719C5F53C77590FE7863CFCD64AF25B4
+:10B080005F26BF9840763B4D732A98E760ECB60484
+:10B090008467B680A75DD4EBA60A3B52B49AFB71D5
+:10B0A00029395C9E52724CE26A117C2ECF6509519F
+:10B0B000DEE1ACA03FB189EE5CA7869A08C953FDDA
+:10B0C0000E3E5E4682BFEC011DFF4AFF4AEECBE218
+:10B0D0003EEDD438FC3D42C051B07921D17D76ADF2
+:10B0E00038F76135F72B18F005E20DE8487C704B16
+:10B0F000C63CA2DBECD5CA5D44C75005E53FA57F41
+:10B10000163BFE75627DDB6D81E158EFD79399ECBC
+:10B11000C33A82EDA97E13ED2394A5521E24339DDC
+:10B12000FB8B99C25F8CCA7D60B809E639E54AE6B7
+:10B13000F40EFF5EC3FCF6F81CAFF4FF0C7E5EDF7E
+:10B14000389F8F37A53D3414E31EB9CF2CF1115E23
+:10B150009A3853AF4F6F12F8080F6633516F403C67
+:10B1600061A73CBC13E6C17CC2D6D14FF27C023F42
+:10B17000FFB92487FB3DE3D303C3D14FCB2C0A2C6B
+:10B18000E2F693AF33161F87B2651C704F19C6B134
+:10B190008DB7DB7D28776B5F5666115F87AC7828AB
+:10B1A00010F03D97437098A8BE8D0535A247637394
+:10B1B000201C9FEFA7929C3582DF8771C064E4F367
+:10B1C0000CE2FB30E77B6EFF64BE01F5A4DEDF9688
+:10B1D000FA40EA19B46FC8CF522E1A6FEC2E46FA15
+:10B1E0007E53BD72CECCE5FC1CE001E548CA4DF2B1
+:10B1F0004B5C5E562EF556E2F39520F77A7AC7C679
+:10B20000670827C62B52BF2FC90E3C90837907537E
+:10B21000A495BE4115FAB8F1A515C5F1BE2392FA61
+:10B22000D82ACECDB48693C2FAFD12ACC1482EA75F
+:10B230006B08ED51D2E2F8F998D61C695FFBD4AFE8
+:10B24000B5223CB1F56B2EB45D283F5B93E87B36AD
+:10B25000999F8A1D77B1E037491719A7E0BE07F615
+:10B26000DF9AC3F9659DE8F76C8E22E4226CE07FDB
+:10B27000AF29781CEB0FFAB363F2BD7F56BE4CCEFC
+:10B2800023ED692CFDE5BE0DAE676A69FFFDDAF7B7
+:10B29000893830861F77093969CE61B4EE7673E458
+:10B2A0000B92AB05C98CEA7E36327F3AEE07BE7A46
+:10B2B0001597077F4F318E3F342FE8C81D11CD0BF6
+:10B2C000E37D8C4FEA34164A009AD46D3787F5DF58
+:10B2D000D33C95CBC73F9F6C0DA9C0E7FEBCE0BE39
+:10B2E0009C11743E087D3717FA818DF6B1C0911E0E
+:10B2F00081FAA589753B10CF8D6A5731E631AB5D78
+:10B30000C14348FF8F4C5DF9BCFE83EFB31D137939
+:10B31000DF6322EFDB6989E4FD5B46F41CBB0B8C29
+:10B32000D75F5DE832A5611CF8C1EE3F3CF732BC47
+:10B330007DF7CB67EFFE21626B65D23D3F836BB536
+:10B34000550D68BAFCDCB1E4F87AF6CF82BEBDF5E3
+:10B35000514B13E2E6FD9FCFE5FD9A62F6B59FCF14
+:10B36000E5FA34FA7D14DFD7FEA09FF3AFAA72B9D5
+:10B370005EEF14755BB1CF278A79B69B59F146848D
+:10B38000674B32D503308D9F5B56FB68810FF7F119
+:10B390003B0BF939F93DEB14B203C7CC5CFFC0DFBE
+:10B3A000EDD68AA81D453705FDC45A67286202FDFF
+:10B3B00051BB283982E765C27D6D0CCA5AC849F570
+:10B3C000C3B3847D9CDDFCC65798F7A8D598750C4F
+:10B3D000BC77D25EE340F330F7BB0FE051342CABC7
+:10B3E000BA5DD4998A73D8FC53D44B4997F3EB8C4C
+:10B3F000DF97BC901B30E7C2FAAB5338BEAB1FE0FF
+:10B40000E7F1CAFEBB85DD8BE5B7EDC8AB00EF8782
+:10B410000AB72FB1F364E78DED40FEAB76079CC809
+:10B42000C7D50F9C35E8B5734AF7D33F43BE5C9050
+:10B430002CCE4763F9FA3AA521B95C6EEA70DF0CAD
+:10B4400054E3F9B2AEE2C505C8FF3DF97FC4BCDBE9
+:10B45000DE04AA73AEC3FD33DD7E777FFB67FDEFAD
+:10B460009B792DC8E78D1715E293597BDF388A7ACF
+:10B47000BD51EB26FE9965B5137D1A2F6AF49CB574
+:10B4800099CFE8BF975BE4F65F83EB0BFD684C2A2E
+:10B49000EDBF65C17DC273099DB7B150D49767E711
+:10B4A00005CB11CF1B921CF7627C78C1CACF576ABB
+:10B4B000B2F03A7226BE43967CC272938D7CB0F78E
+:10B4C000CDAF10AE1A6B90CEA99C3313E26915E98B
+:10B4D0001619E12CD5D37FCCB73A27D7857A03E06C
+:10B4E000FFC0C2EB88FAF23FA7C3F342BF7C90CD06
+:10B4F000E5E8837C56BB0BAF57C315DEFBA050B409
+:10B50000CB793B769C7A21471F0CE5F62BB430298A
+:10B51000EEF920F708797C21D77F07E255DE7F52CC
+:10B52000C0919DE7BF13F108FAF16EE2AB14164922
+:10B5300085F1AA5FE3BF57C096F7501D6BEFBA8A3B
+:10B5400005BCAEF8702D8D8E5B83E3413F3FF9F172
+:10B55000AFDAE83B383605F435EAE785790CF533A0
+:10B56000CC5B8FF3C3B89154EA9740EB606DA0B702
+:10B57000817FCF8FF0125D5656029F0E17E7EF7B4B
+:10B58000A37C25F929968FBE9FABF4B7BFFF7D84BE
+:10B590002B767F9FB181446FE2B76FF13DD9E8749C
+:10B5A0008E1790FB965CB2BF91217AB9937896FA88
+:10B5B000F28344235F240A3AAE12FD7AF12CCEB313
+:10B5C000CA28E27650C60B3F13EB72C45CA55D8BB4
+:10B5D000DD1F7008FA3B7279FD14D06503C229EDB6
+:10B5E000611F7A6FE2F4867E9B488F25F4DC930E10
+:10B5F000F6EC0EF093F03C4B78CF85EFF5C95B8C01
+:10B60000E376B8696132433FE1E95C51F73DBC87BD
+:10B61000EFDF95F4903E9AC540EF2857A61FE60845
+:10B620003CA00F9FC7FA118043C17AA43452035E35
+:10B630001C0FF0BD3337338AEFD8F98EE123F00BBE
+:10B640005FCE15DFD995B132A4D73DEFFC35F96E49
+:10B650002F9E77CEBFEFFDC41E7C0DC739F3FD379B
+:10B66000290E38668914B7DBE33CB744366F50A225
+:10B67000CFEFFD851AC2DFB7E8EC3AB36E06F0E50E
+:10B68000AC2ED58753CE7AF08BB747A27FDD65A667
+:10B690007D28F02F56E3799FC7445D216B36E6097C
+:10B6A000FE24E82EBF3396FA49FA09F3998FEBA5E9
+:10B6B000447EBEFA470BE6D177C6352C7008CF57CB
+:10B6C0003FBD7012F9CFF35890CEF79EDD663C5F18
+:10B6D00037F65CDED8F37831A18FF88A3D97F7F31F
+:10B6E000EFC5AF9BE9CDBB57C5F737B43CCECF9F75
+:10B6F000F753AFFE37C1AFB2BEA049D617BC72F93F
+:10B70000FA82A698FA82A83F22EB0BBEE6F505AFB7
+:10B7100018EB0B3E1F1B1F8EAF7BFD9DA47EC675D5
+:10B72000D0FDCF0B2FBFCE263C6727EE77E476BA4D
+:10B73000DF5F7D43A6C4533FF51DA9791C4F4D170C
+:10B740003D067B9C99E78DF1C772E979534C9D4486
+:10B75000F439AF8F90F903A02BD5E3493F30F6FBC6
+:10B760007A99DF97F2F3B1C2AC1ECAB7AD11FAD421
+:10B770003714FDE68FD11F43F9BDD9FB6A37803AF4
+:10B78000FB87D7156B8551F98A5D0FF0E567FAEFF6
+:10B79000D807E789F3207CCC47DF390AB9B8E7FB43
+:10B7A000E353707FF6CF0F5619BE5FEBFDBEDD226F
+:10B7B000FD40BBC19EB3187B3F7BF79BE4E7D558A8
+:10B7C00003F41DDD27AF7C9FECFC5C1670A19C9CF4
+:10B7D0007FE5AAFCE0FF859D97F0DC16BACFCCFD93
+:10B7E000FB0CF24FA609786EDBCBFD4C93D56FA610
+:10B7F00079FCCCEB745108CFE105658BE7E8DDD02F
+:10B800000B7F299DBF3146C0AFE0FB80DF1BC49595
+:10B81000CD0ABA116E792E00709D1BAF2DD7F9BCE1
+:10B8200078BD4909684CF7BDE804D69C8BFD4DD620
+:10B830006E559C5746E7CC2744F145ED64D15E7EBA
+:10B84000FB857BE6E07D3B3FAFD822E0B83F4F7CF5
+:10B85000076D65565C77823D729AF60FC535349652
+:10B86000FBEDA1425E979C88E721C0BC76FBD91016
+:10B870002ED6C99CF49DBFCD792182F18BEE77261F
+:10B880001AF346E87E678245785EABBFE731BF4377
+:10B890009126E06B117AD283E71516D1B90CA42753
+:10B8A0007F9A3C97CE27CFB42FA27DEDC71C13699A
+:10B8B000DFD38588C77AFB89BA7315E07966C078CB
+:10B8C0009E42D64C63DB1334B6ADEC18D587299174
+:10B8D00080FB527AF4DC48B3D037B72772B86E4F8A
+:10B8E000E471DE237926833F1290BF0F93C6CF5DAC
+:10B8F00038E7B25AB14E03FC9347F2B87FF22150B9
+:10B900001AE249FEFB316537F907AD1B8EBF8BA2EA
+:10B91000FA96019D5A93BD4B35F4FBEE14BF23A656
+:10B920007550FDC3967B527D58AFD36A735662BE85
+:10B930003494C7F3444DE2BB0FA048DD0E786FCBC3
+:10B94000B41CEA9751D54379D69E158CFCAA3E7C4F
+:10B95000FA35F03FE0FB496CE3791035BE2EFC0E62
+:10B96000D8E357A96E593EDF86CF014E45F005DE7C
+:10B97000BFA922FA3B4F457BCBF6E379962CA8F87A
+:10B9800078DAD24BFC3E5DF8F34D7B2B6F1D0170D6
+:10B9900015750D23361EB857ECD3642488FD667EDA
+:10B9A0009E6F6CFF81D81FDA4987BDDFA9C7472684
+:10B9B00088CFF1BDB149B4EE23224FC5847E18195A
+:10B9C000237FA3A3F240CFCB44BB49D417E2191481
+:10B9D000FE0A9E06A17E195C3E7C4CFE71B9BD9E9E
+:10B9E00045FF709CAAE8B8A4A7C6451F47E5109676
+:10B9F000586EF5B5D443BF8353F9BEFC482DB20F42
+:10BA0000E57DB4B896892B9BD54EF85DB934F2BA72
+:10BA1000B90053320115DB15CE152D38CE0D4A84F1
+:10BA2000AEF933D7B4209B5D9D5F24F241C1F1286C
+:10BA30009FADE3F9F7D22DA37C3E273C9A3193E7E3
+:10BA400071A7CFB4521DF6748D9FEFC4B460C11DB1
+:10BA500020677754F3FC31B6AB75F919B95F7204FE
+:10BA6000E29B9D71FC83ABF3B95D93EF3789BA21FB
+:10BA7000F9BC389FE7CBECF9134EE771F8685FF833
+:10BA80007C9EF0D34A5849CCEFD1FC350FFDAFCAAC
+:10BA9000DFF6A7278CCF859E98EE7FD44CFEBDD0D5
+:10BAA00017522F07443D54973897E5BDB11CEFEF6F
+:10BAB00056CE277D713B6B267D7E070B9911BFBD4E
+:10BAC000FA7FA2CE3F8279A6078CFED28C99B17EF6
+:10BAD00015E75739EF9D41E3F369D2EF9D68F47B99
+:10BAE000ABFFEDEB54B28B594F375C1A10AD7B6A4C
+:10BAF0008AA97B6A14754F4DBB171CCCD4D53D3534
+:10BB0000EDE5754F8DBBAF54F7D443FB4F47CCE108
+:10BB10007DB82F73643E8804C0B95FD4C91CC03A95
+:10BB200099F2285F264FE3F959605FDA67C97526F5
+:10BB3000F9909FDA4CE594CF6D7324FBF4F9D3951B
+:10BB40004B81EF74795C59E774A49FB8B83C9FFBB4
+:10BB5000C1EB159E4F0FDD69A53830B32860D8BF03
+:10BB6000C854D951CC4B9E167ED07A912FC1FDBFBF
+:10BB700061700D2BDCBFE97D1FBF9FC23C668C3E10
+:10BB8000CA4CF7D1FE4166CA10DA0798B9B76C1BE8
+:10BB9000E91BBBCD87DF07C8F16706B768587FD4BC
+:10BBA000B4778B56638FF2DDF87CC1AF492C09F96D
+:10BBB000B5372FB82B81F2829FD80393F2E1FD7A3B
+:10BBC0004B642833F233DDEFCFAECD13FC621E1B86
+:10BBD000B8730EC073FE6D0BCF8F3DC8485E5FD843
+:10BBE000934A794D6D1A23FBB2BC92F1DF8BD9A237
+:10BBF000903F7732959F43B47C2A233B782E6D0289
+:10BC0000D16F3E0B1FC273866A37990DE709DDBFFE
+:10BC1000CDD8AE671D646FEA77F4E167D25B523F1F
+:10BC20003630AF8A7AA8B1D3F83E1B68D48F65C28C
+:10BC30001E0C9B3EAE05EB3C8699B8DE620FFA7295
+:10BC4000A651DC5DCDED287B9ACEAF3A9F7C4AE5CC
+:10BC500072CEF5F188A8D634D8A511C2BFBA51E387
+:10BC6000BFB320FDA511E277170E98F6AAF41B3F8B
+:10BC7000029EE1E23DE9A7497D2DE952390A7F3371
+:10BC800002E2F07CE1EF14B242A42B8C4FF2A060F0
+:10BC9000A0C48F4CA6DF6F182DE603BAF3F3EB4C6C
+:10BCA000D630F251ABD24C7ADACA84BE5682A4970F
+:10BCB000FF3D1452910FAE63CDB7E1EF818EB176A7
+:10BCC00025915F6A0FFE44CF272D2C92BF5331F090
+:10BCD0000B3D3F93FADBB8FC22ED4AE43DEE6F4C9E
+:10BCE00066E007C2BCFEF7B91F7440E1F122F88399
+:10BCF00007305EFCAD6912F1C3245806F61BEF3421
+:10BD0000D2F966B7B13DC9DB870F54FDEF5980C446
+:10BD10006908CFE412633FBFD46FCCA8DF0AD8D73D
+:10BD2000BCAE7EC5A1EF62DE2069312B413F063CEF
+:10BD3000475FBCDF2BDD85F68298A0CFFECAAEFC44
+:10BD4000117DF757CE8B3CF1F5AC7BEE0EA52FDFC6
+:10BD50009C3BB85875EBF84BF2F34BA21E43794D60
+:10BD6000ECE30EE7F9C2A89DE77C53215AD723DF05
+:10BD700041FF3F483D207E77E486DDB608FEAE4EAB
+:10BD80009918E77AE49FF2A85D8F98EC5E4B21F258
+:10BD900089AF4D55FBFAF3AE342FF1CB30939FF8BA
+:10BDA0006504F3A5239D46593B5A34847FCFC89C34
+:10BDB000A0DDC01F7FCC47FBA7007F503EAB8F7D2F
+:10BDC000343E8FE11F49C7C3C28FBE9979298E982F
+:10BDD00028FCE84801E79F2AFBED1ABEFF4621CF69
+:10BDE000378CC38D47FA6ED56817ABAC463E88E5F5
+:10BDF0002F98D1A49F3796DFFAE39B01C837D22E44
+:10BE0000A65F996FBEEA9F6FBEBA1CDFC4F28BD4E7
+:10BE10002B3B6DCE2A3BE6B76A15D2C7C3DE1ED8D0
+:10BE200082EDAB1A0AA85E6667AA6F3F3D6FE6CF48
+:10BE30008777F955ACA7295A249E1704AAB0DDB418
+:10BE400098EF678C38C2EB6D063EC89F972D6BDE6E
+:10BE50008FDF093685F8FB2F9D6EA5EFA5C2ADE2F9
+:10BE6000FDCAF62A6C37B5F1F74FE2BED4B55827B4
+:10BE7000176EC1FB835717F87858CAFDDA9B049FE9
+:10BE8000EE5476EDA7F7DAF97BF30E5913E977084C
+:10BE900085DF7AA358E74D9BF83A333EBE857E97FF
+:10BEA000744E4F88FCA74F4DF5F4BB37FDC59F95E9
+:10BEB0004A7B2E5E6F467D8287795981AF0BF9BE32
+:10BEC000E5569862C400EE0FCAFD3EAC3FD0D71BCA
+:10BED0008C18C0EDBEECE74AE3DFB5B1C793295F2C
+:10BEE0002CF723231B98827A19D728FC80B8FB9360
+:10BEF000371735D3BEE4CD03E4BE64B786E7B29707
+:10BF00005DFAEB847879963162DE53A29E42DEAF11
+:10BF10000D17D0EF8CED4426A1EFF29FFA3DB5C589
+:10BF200039E34C7C07B7B380B76F19B0E5276D10C4
+:10BF3000BCCF33356B782E1BCB57E83BC07FED620F
+:10BF40009114475FF86FD658C4C2BFE323F8E7B631
+:10BF500058B6F2EF31B95E9A2ED5CE984124A7B7E4
+:10BF60000B3ACD1820ECD330360CF5CD7441B73BED
+:10BF7000ACE0B7925E6B37C7C8FF7706A0FC3FD630
+:10BF8000AFFF6C7C1EA31F6AC5BC7385DF3C1F7F9F
+:10BF9000CF54C5F3E2B9FF7CEA31EE37DFCF3A2860
+:10BFA0001F79FE71EE2F36C0F2905FFAFCDED77675
+:10BFB00063BBA123F6776643347E9FDF712DE5795D
+:10BFC000DDF38F3554607EAF76E3DB943FAE95FAB8
+:10BFD000226CD417E060707DB1E16ACAEB98ACFCCA
+:10BFE00077368781BEC0BA9461586F0AE30F15E7B0
+:10BFF00000ACC057C4F7FF03486F4CA47A541A4FE3
+:10C00000A57DE0B7FDDE287DA4DD88D51765325F0C
+:10C0100033308DF259527F94093F854D8C8D1FD757
+:10C02000921C0E13AD8D92BE220E927E07BC4F7EE7
+:10C030004797C91E3699F47E4698E4B2DC0AF68228
+:10C0400044C96765E23C81183A6FC2755D268E323D
+:10C050003E8FE10319C754083EB893F9293E7A513F
+:10C06000F0C1BBEFF1DF839B6E5F447CF8DEFBDC4D
+:10C07000EF9471D4B78F9F22FF50FCD44B771BF8FD
+:10C080009349F8BB169306ADC3FDF44E1BFFFD6B41
+:10C0900085D3D975E7917C7D7EF15DFC1D17DDEFC1
+:10C0A00043B44C4AB0E23E628B99C717D3267F5007
+:10C0B000314BA73F86A45746105FAD4AD7F7FE84A1
+:10C0C000F1C69BE23CD6BD9944F70B5DFCFE854D65
+:10C0D000D7F84270FB73B338DF4A699E8B25541240
+:10C0E0008EB9E2775FE6A9E157BB713F5609BF58A9
+:10C0F000AFD0EFB4FC0EE5B2CE14B1F0BC5E17E5E4
+:10C10000E9E5F8FDE72943145F5B5EE7F6B14749CF
+:10C11000F4F13C6FC8F0FB3FBFF3F27C943F2FF08B
+:10C120003ECE23ED5F6C7DC2B10537D377AE7F6322
+:10C13000FE14DC175534FE7BCFB1F3623DC2725D55
+:10C140009EFA982DFEFEC129A16F4B105730EF4388
+:10C1500039FED338FF2911179E12FB63A71C7CBF41
+:10C16000EC6F03781EBCC4CBDF4B14D753623FED9A
+:10C17000549A319E94FDECE27A628935B05C47575F
+:10C18000EF868466CC4B641689FA93458CC74F7B47
+:10C19000520DE72E64792B4BBCB8CF5124CE2DD84D
+:10C1A000C3ED32EE63E33EF313D941133EFF3FFD8F
+:10C1B0002524DF00800000001F8B08000000000025
+:10C1C000000BD57D09785445D668DDBEBD857487E2
+:10C1D000CE06618B9D7D0F9D0DC3269D8428B86082
+:10C1E0002780A06C0D0804C8C6E27CCCE8BC3406ED
+:10C1F00011F95CE2382AFE2E7F83E0EF366384A0DB
+:10C200005103D32A8330EAD820286A465B46013599
+:10C21000242D2E836F783FAFCEA9AA74DFDBDD6CAF
+:10C22000BFFABD47FCACD4ADBA75EB9C3A7BD5A93F
+:10C23000345A897D7B3E21C4EAD34F2D20A44F225E
+:10C2400033DB4DB4D4D1923EEF8B6265B65522A458
+:10C250008C90C1D69A6C6B227DBEC2A7277250BD4E
+:10C2600086D6D3A0EEC8B6D27E7DD3453BAFDFC322
+:10C27000EAF49F860C226401FC66A5A5D1E4910B2B
+:10C28000E9EF1B743DBE6C6C276753099164E22291
+:10C2900071B4924DAC0E333C1D673996478B28DA4A
+:10C2A0004EC769D29B364823B1BBC348C79BC3C79F
+:10C2B00023C3CD5A187F361B8ACCE9DAFF93144387
+:10C2C000C85C23593F8CB6CFEB1AACA7332075312D
+:10C2D000AE4C0BC04D265A8ED1EF4AAE68F96C3485
+:10C2E0001D1BFE4D082D09D19263627E08878B10BD
+:10C2F000807B8417E1DA58E14FFE8F5242FCBB0C81
+:10C30000962DF43B0D5D6F1D91285C0D02BE0E2530
+:10C310007C651C9F8418DD5F1809B99E4864201D48
+:10C32000A7D3E42C037C36187D384F3AA2DE41D7E0
+:10C33000C575E7B858847F307D9FCEE7A5163BF9D9
+:10C34000A72E80CF9516067FB55C5FA54F20E4D45D
+:10C35000CDC462A08F56EE5FD86AA4F59577110B15
+:10C36000FBBA5D4346D1F139BE22CD2FD1A1215672
+:10C3700023AFC367670E20D6EC407D88334E51A7AC
+:10C38000E31298C7723EEEB0BAA18AF74734A72AE3
+:10C39000FA5FB62657D19EE22A56D4D3368C51F492
+:10C3A000CF68AB54D4B3365DADE85F44D206120A11
+:10C3B00067D33E99B8296A73DCB58AF6BCA76F5279
+:10C3C000BC7F9C343F348EF6EB888A2924948E5AA5
+:10C3D000A362B640495C766F3EC5CFCD1C8E82F617
+:10C3E000058A71BE89B9721FACEBCDDEC5D7124A82
+:10C3F00057233B9729C65D2ED7B3756BD31DF5D157
+:10C40000F79AE90FE0B398F8F70EA3F4D1E8966C29
+:10C410001EDABC64136B17EF2DEDDC8CEF2D752B42
+:10C420009F2F7F5A59775592EC66CA9FBFB59A13D2
+:10C43000901E8692A16783F82A4007B413FDDEA9F7
+:10C44000C764B72105F093F5F038C48F8EB8ADA15D
+:10C45000EB758A109B07FA3F6FB6B9687DC9FE85F8
+:10C46000381F4392920EA2AC4A3A88CE56D281D956
+:10C47000A65CF781E5CA7557E337D69E7B4EFCC6AE
+:10C480004F52D285C06B39FDF939F1FA24E0333AC5
+:10C4900080CF923DF65613E2894C338E02FCB1F9FF
+:10C4A0001A884306394712A89CA1CF6D6C0872D236
+:10C4B00062726928FDECB04ADA63C6C038455ACFCB
+:10C4C000EB00CF7AC945E0BD28E24E0279D15AEEA1
+:10C4D00049F6D075293636C3CA912F4D8E97414EF5
+:10C4E000D6EB3D85D02EC6FBD2E4C4E73DD23B8BD4
+:10C4F000098597683D85280F8D04BF2FF0386A00A5
+:10C50000A3E3E5C48172F8254ECF5F7C5487785C45
+:10C510004C9AF7DAE9F7BEF998E177297161BF45DE
+:10C520006D4A3C84E04F85374A3656F86E13877B58
+:10C5300019216E4D5A283EA52EC9632E0434740964
+:10C54000B9ED3C5BC2C80EF03986F4FF43F92DF01B
+:10C550004B3B48C1F209BE671914F89EC0A7905B17
+:10C56000E23B06D22C27011FA8E418C956AE1301DE
+:10C5700021310AFFC37FAF52196A8CE31F1B04E30A
+:10C58000C0E409B99C7F872C7026019E8CA40DD72E
+:10C590006FA364DB20D3EFC897A5B4128ACF128BA8
+:10C5A0005D86F52A23DE59F0BCDCD8DEAAA5435D02
+:10C5B00046CE58909E063FD570363E008724E072E6
+:10C5C00049444BEBE3797DAA4BF23D9A02F0BCF56E
+:10C5D000137C773C2FA74249D78F82F9CF4FE8CB06
+:10C5E000E324EB08F85EEDAB59894037EBA566A272
+:10C5F0009ADF91D7E838B2C61F0FFDAA8953CBF452
+:10C60000AE1BF5CD5B920FE77D03B1DF01A5D06FC7
+:10C610008DA4FDCA59B4DED841F5560C94511E992B
+:10C6200096A453854FA23D0A750D8504E87B39D445
+:10C63000C5BAA704DAB12E87D6D7521886C49D5F33
+:10C64000BF3F9C62E1FAD19FC9DA997CABE3F8AABB
+:10C65000137ACBAD9C5F37FC328490BFEA294E8AB7
+:10C66000818F8C2ECD40425253385F169242189FD4
+:10C67000F255660A1D7F501CE5432998EF587FD17B
+:10C680001EC2772AF849335DDCD114DFE652BD9330
+:10C690008ADC85C1F05E003E841DB10CFA02BC2923
+:10C6A00056AC370CE8FEC00ECDA5DE64D0FF629D0F
+:10C6B0009AF4C409F618694FC4EF8AE757A7683897
+:10C6C000BE283D5E009E22AF433ADA43621D2ED45F
+:10C6D0001E1A1BCFE62FF0E708C5F734053E09C543
+:10C6E000678102DFD3C2E29BE3E36499F72958270D
+:10C6F000D97C6810E0797692E346E83FE288EF98CB
+:10C70000A409CCAB5AEE79EA51D0639DB20D78B949
+:10C71000713C93738DAFC8C8FABD5D06B744C7A915
+:10C72000EB7C13EDB39E162A487591F1D40FAF0A36
+:10C73000DFA1F860EB28E059A1827FEE81EFCC7396
+:10C74000AC08E72DE7C1C32DE1F0F0CD6FC83C4741
+:10C750003EC0973FD0971FF86E315FF7DFC7386E46
+:10C760004DA1DF2F7D7F780CE0A75AEEDA3B14F065
+:10C77000B05AB219E8772718882B8AAEF39035554E
+:10C78000E49F74ADCA7DCD360BC547D270934DA6DC
+:10C79000F8C8BA4576B8E9B8FF58BD2A6E212DBF52
+:10C7A0006EA19FCEA0CF258D03E98D6CFFF4777429
+:10C7B000BC2CF36CDB465A9B63A0F3A1DF49F94D17
+:10C7C000B4278DCA89BFE88911F84D97DA7C703299
+:10C7D0001DD71F2BDBC00E4E90C944A02F81E784CC
+:10C7E000680687785EF1F856C9670A3C9FD0EA2F41
+:10C7F0005949CB19B0EE6501382754F94BC0EE11F9
+:10C80000784E4863FD89D69F5C1BC41F65800FDA94
+:10C81000DE0D761DC56763A27E3DE8C15E23AB13C6
+:10C820007B36DABFAB8D8C3FBAA392DDA01FBB294C
+:10C83000AC5E1CCF6326A620B918651F7839859B8E
+:10C840001C90C9365A7C6FB10F8C457C58D838DCA7
+:10C85000DEEA256412E069F5E4CAC171B44C6C6586
+:10C86000F851D3C9AB29CCEEAF3F4D19AF24F0BC82
+:10C870005EEBD15B4CF05CAF787E94E2CD6508D482
+:10C88000179C48BF92A09CB1AD87FE0B374413574D
+:10C89000907DD5C1E711092F8DB15AA2A5F86894F2
+:10C8A00088E35CFD5EFB6F19F1AB9EFFE7BC3DB119
+:10C8B0002A3C7C47003EDA5E75E7B50F83FDD9E878
+:10C8C000D511037DB4FA958AC124CC78FD783E3D1C
+:10C8D00096B8E383EA5A1FE2A3F1F415F8BCEACE56
+:10C8E0001E3DD03D8C63A5CF5747D907DBCE81E7EE
+:10C8F000323E8FC6D3B1C4151FFC9CC993C0F80942
+:10C90000D8FE2C2090D2ADAB53766FA3AF3EBB4F79
+:10C9100033694B98F9EA5319FCB9895AE4973C0FEB
+:10C92000B16F0EF37DD16F501C95D72686E79A82A2
+:10C93000D0F97554FAE6C2FC2F9F48ECE1BE779A15
+:10C94000D38B9877479C6F31A7FBCC1A7350DDA22D
+:10C950005CC7442E173AAEF625C3F8BD93991F1F46
+:10C960008A2736CF51DA6609F05191E42C02395208
+:10C970003F8356289D0C9EEDD138F3037C1769DD6B
+:10C9800003F8A6FE57C9B9F0ADC77631DE570739AF
+:10C990005F12BB49A2FC349FEBADF95B975F4B651F
+:10C9A00067BF1FF3D526EAC7D04F7C459ADF3443D3
+:10C9B000BD4D423F658193903554EE2CDE56B21E3C
+:10C9C000D4C5FC2442AE8863CF6F83729D2EA06FC6
+:10C9D000F1FF7612AC1FC5F76FBE5B69BFD691BB86
+:10C9E000BF05FBE7AB834C3E508D867EF8E23F2AC5
+:10C9F000C7ABDB7ACD7198679DCA0ECA02438FDA46
+:10CA00002185A9DC4F1B4546811E58B9ED3B7D8C25
+:10CA100035321F7C4DF93D3D03E4A505CB8A547B9F
+:10CA2000592AC4190EB0793A529DA353219E72809F
+:10CA3000CDEB54FD29A6271E4B40FD6400614E7FBF
+:10CA400035CC32BA5BE93CEEA4E2248AE2C76060EE
+:10CA5000F690B0036579951C43DB477FB93A0ED653
+:10CA600037E1B9AB26C17889CF45DB019E8D15F63C
+:10CA700022881B6CAC31D95AE99046FA3EE80FF790
+:10CA8000B3A3DF180A5642FBFD95C380ECBA5EF7EC
+:10CA9000405C6583E6DBBDC368FF0D57105B2B0967
+:10CAA0007CA7A9ABE645984FF234A66736A6D88B8B
+:10CAB0002C41E3126ED73572DCF5EDCABA6F2C5DEE
+:10CAC000DF47F7A1594DE14B1D08722397B075263A
+:10CAD00067289E289DC0B783EDD71EAAAF4856A0F1
+:10CAE0009EDB2E7974149E868E1735A00FEB6FF7A0
+:10CAF0000C9A057AE919AD6D4BD0FC12FE32A4D226
+:10CB00001A13D047B3240BDA0BC23EBF91887FF9CA
+:10CB100048373339DDDCC8EDF259D10CBF0B882D15
+:10CB200019DEBBC948623494A56655B597A1BE5AB3
+:10CB3000AE8B053B096009B7DEA28C145F6A7CCA24
+:10CB4000EC92E8BAF74AFE4C18E46B88F9B03893D7
+:10CB50007B4B4AE838EB5399BC68CCE476623AB137
+:10CB60009B29DC8DBBB3366FA44D8601741D8B51A0
+:10CB70002E19CB8BD14E3682FFB3F4B5288F141308
+:10CB8000C00BB1D88B34102FA81D5EBC116CD32301
+:10CB900054BE5006EBD5F992918FA9DC91A8EEFB1B
+:10CBA000CF2D936BB494EE1A87523B8CD6DF4D9DFC
+:10CBB000C1EAA9BEC51A5AFF614B33ABE7FA8E41F1
+:10CBC000FDEC965B6BB4942F1A8B7D8B655A1FFA24
+:10CBD000E45DAC1D1C424A58594FB6D5B8E8F85F21
+:10CBE000C772FD6EF3CD05FA697C354BB33108DEB3
+:10CBF000F83426B7BE8E62FDBE4E21F36A01DFD93E
+:10CC0000BE4C98A7E8F7AF546117B76129E014EF5D
+:10CC100091A4F0E3FF99BFB7B48ADB25D16403E0A8
+:10CC20008D2E932B86E27F4F57D616E8FF406A1C65
+:10CC3000C7171DA734308EC0A3184F7C7719E85D45
+:10CC400090C73A166715EDAFA532F949BFB30EBFCD
+:10CC500093CFF0DF583BBC08D68DAE9796AF979632
+:10CC6000F9AB9BB13F8C1B5B88F2BF444BFBEF39A8
+:10CC700043FBA704E6ADA68F7D9C3E96B652418845
+:10CC8000765A1AD2D18468661F9252251C43399E67
+:10CC9000E3D362199CFDEB3158C2EFB4723C0EA78E
+:10CCA000782FB878B83FE6F3F9B9E10E5A2FBB0CEC
+:10CCB000ED9D395B82E121E47EC5385FAF55BD57FC
+:10CCC0004E1910E6119786EFDD19458CF89C6CE93A
+:10CCD0007F2FA590D9A560AF3670BB9AB8AEC0E0E3
+:10CCE000423D971A0D1BBC7A2BB4B74B7637D067F1
+:10CCF0003A850FF05B7B6D2987CFC2E1B330F8DC5A
+:10CD00000A3A2587FCC9D3CCA1F4DB8FF7FEF1F2F8
+:10CD10008BF9780ABE0E371EF047A4F530A5FDCC7E
+:10CD2000EB21E6A9C2673F9E55F313F8047EC6F7D0
+:10CD3000F295F4D84FCFA9621D557C9D7289DFAB67
+:10CD400060EF35FC96AE23D82756253D3774A4688E
+:10CD500016E407DEEB84B52C0BC4E946A6717F6FA1
+:10CD600038190EF2DB55C9E2A9AEED065BAB15E34F
+:10CD70007B2569E1E37BF85CEDEFF5C5EA89847614
+:10CD80009132DED09768F3DAC14E3D496CDBE8B8EA
+:10CD900063557607ECDB6C3705DE0BE81365DDC504
+:10CDA000F920347EE44F86F9951A2A77586D845C11
+:10CDB000F7E453289F4B0756AE4AA1F5DA279F6642
+:10CDC000F56195DF418866DA93CFA03C2FCDABFCAF
+:10CDD0002E15EA69CFB2F609F61D32EE383C5B3308
+:10CDE0007148C07E989E6665F6479586001D19E4D9
+:10CDF0001536D093029F91CA5283A6399CFD3AB74B
+:10CE00009F9FD9BE4639D7CFE5C29FF76915FE7CF3
+:10CE10005F8CD1250F847D2EAA4F29BC4BD39C0B50
+:10CE200001FF4DD13D73C114BE3DFA533DD843922D
+:10CE30009DDA1B101FB15AC86C3A4FA967A303EDC6
+:10CE4000C06536A316F1C9E35514B6B3749CD77602
+:10CE50003F73EB30F61907CC6334E7FFA6DD3FFDE7
+:10CE6000F809E8D1AF4D3608078EEE7A6415D85729
+:10CE7000A3BBDEFE89E95B13EE5789798F86B82361
+:10CE80007D5EDE69C0F98FEECA5904FDC7BEDF952D
+:10CE900006F431BEDBD30AE2A06FD7CBC39CC1FB43
+:10CEA00057E4B87436EFE2ED8B7E7C7CA927605F97
+:10CEB000527CDC919608F838B318E28BBD8907D70D
+:10CEC000FBD04E1BCEE299FC7D6A9767039F9F22A1
+:10CED000036CB0BFD06766E3A8E39C476A287CF484
+:10CEE000F9783F9D4190DD3CE1B4910A9040BD82CC
+:10CEF000C42AEA55C6218AFED5961445FB55493900
+:10CF00008AF6C9D62245FD9AECD18AFED7D92A14D1
+:10CF1000F5EBCB272BFAD7D86B14F5224FBBA27FAA
+:10CF2000C9BE4E65FB212BAE4349B7A30AEC799BE2
+:10CF3000D7D90AE5E53D6D5503AD2424BE5BEA7300
+:10CF4000B7C2F3B1679ACB3C2434CE4B9639715FAC
+:10CF5000C000EB2207ED135478911F7B35366B70C0
+:10CF60003C77F620E7ABB04E6F4914ED14D9571853
+:10CF7000FDF1B05ED5F3EE9163605DFC04E35F1DEF
+:10CF80007ADFBD6341CFCF91D1EEEDD012B41F3B1C
+:10CF90006616B821067844F2BDF409C8A939D1282B
+:10CFA0004FC6530B17E186BD5009D6C9A980BB8275
+:10CFB0002C55ADD30A45BDDAF25B45FFAB92D62ABC
+:10CFC000DA275BEF52ADD3FD8AFA75B64754EBB45E
+:10CFD00059B54ECF28DAC77FE16B05369AD0E39278
+:10CFE000CD74FE638EB455C1BA8CED76CD017E2929
+:10CFF000F5385B5184EC697E134A0FF5AB20AEF532
+:10D00000464B12967B5AAC1897DADB928DE5BE162A
+:10D010001B3EFF5B4B3996EFB4D8B1FC7BCB242C85
+:10D02000BD2D0E2CDB5BDAB1FFF6964E2C290647A0
+:10D0300080BE4888E7FA87D6C1DFEFD5F81A61E7E6
+:10D04000D59FF6BF514EF60EF0F542FD76D76994A6
+:10D050008B9FA413946FF119ACFC29DDBE2ABD8C03
+:10D06000C914E44F9D6903E881768DBD08EC6B6DB2
+:10D07000BAE60FDA1184DCB1D6916489657523AD07
+:10D08000E362836346347FB00F27E44FA03270938E
+:10D0900045530BF5BE28D67E364D53EB42FDC0F608
+:10D0A0009DA705F69DB5E961F69DFF74C26A867875
+:10D0B000CBC133596680EB208F2FD949916E3E2D1D
+:10D0C0002BB4453AD08B47547684283F335598018A
+:10D0D0009E768D6D3AD829AEAB75641B9517B51247
+:10D0E000F347FBEDC074666FF75D67407FE790C65E
+:10D0F000BE08E89CCAE927005F195BE36A41AFF408
+:10D1000099FDC98087B4ADB1AC9EE87F42B205D528
+:10D11000750CCEE15B2DB5AEFCB070A6C07CD470B2
+:10D1200066A6F3FD068F7D04E85F513F54636F00F0
+:10D130003D71A8C29E01F339E83020FFB81C667724
+:10D14000060839ADBD6C7A50DCC59DAEC3F7A6E9C3
+:10D15000199F919B64F7B6307EDAEE7466EFE3BAFE
+:10D16000813F776334DAE18734A46E7B183C7EC05C
+:10D17000F1F3CD80F0F1970FD3991EAC9C6AC6F104
+:10D18000FA5647E1BE6F9F230BEDA0BE668A25CA03
+:10D190001F7D279A4FEEC47683D812C3FDCD595C0C
+:10D1A0004EFDA96BD50F8769FF4F5747DB50865B54
+:10D1B00072513FDDC43BCF8937A2DD32A7764425CB
+:10D1C000E8A5597C9F6CAE593B08B7CBB4B17A0B3C
+:10D1D0001DE76653D17A50FF8B136AF4B1B45E3702
+:10D1E0007CC57A2897A5DFAF8FA3657DFE8BEBC149
+:10D1F0007C6CA0AC5586FE92EFDD163AAF796B647D
+:10D200002BF39FB85EB32FBFA87319820E018F4016
+:10D21000A714BFE8171EE1F816EF1DE1F85A9CCEDF
+:10D22000EDB602527056B9FFB30CF8A167CEBB99A8
+:10D2300011E2F4CA766EB77DA067DF5DFEB4CE1D45
+:10D240001C4F12DFFD289DD9D787F4C42E811D778E
+:10D250009319E9A370E677B79751F80BBB2C1ADC4A
+:10D26000BF1772DC4B307E5FF68513E5DCE53DBE13
+:10D27000A70E13A4F34EE093F3E9A9A9AEB5A81F36
+:10D28000467F4FF50FC8C533CE4F0FA31CACE372DA
+:10D29000B019E5D79E963558DFDBE2C2725FCB0648
+:10D2A0002E07DBB0FD9D964D5C0EBAB91C7C1A9F13
+:10D2B00077B5CCC472778B93CB41B6BF5ACBE969B3
+:10D2C0007692F33EC093D8C79C6674EA005F7F7D78
+:10D2D000C44064D89FE832209D520E78E2D10438D1
+:10D2E0003763B06CB4869E9F51CBDBFEF557EDF7EC
+:10D2F000AE4EB23F0AFCDD7F5E06ECB3CB22D3CF4D
+:10D30000416235833CD9917E432DC8E78356AB19E2
+:10D31000ECD68EADBC6EB79A75B4BE337D06CA9797
+:10D32000834EABD940EB2F6D9DC1DA5D567314ADC2
+:10D33000BF9C3E93D5DD0437B7BBD2E7A09CAD20A0
+:10D34000D21EE0872A63CA442AAEA97EACD8037CE9
+:10D350007055D2FC89C00779E956A4C3C9D6B57BFC
+:10D36000A07E4DF6666DBC15A2A145EBE0BDCA845A
+:10D370001A2DBC3771F88A75F0DE95E9F76B83DFFB
+:10D380009B94FFE23AA85F6BDBAC057B300FE45661
+:10D3900062601C5117ED42BE8AF35D23BB1C28C797
+:10D3A0000B3B1D28C7055E2AA7D5DC0171BAA64E26
+:10D3B000C922C13CA649FD9BF612B5211ACF506E79
+:10D3C000A172F6EDF4BAB8B514CE26A88FC1FA1F33
+:10D3D000D68697BBDE70FAE543CEA7A0376BE83858
+:10D3E0001F52FE81F368360E5F53D77CF37CD4570F
+:10D3F0004E33E8D7515C5F8EE1E5325E36F1F233B1
+:10D4000093FD63F8CEE791F9FA4BA00FCAB78BD919
+:10D410003C42F85AD9CEF9FA38C72329F52743BD3B
+:10D4200081B4619CF07CE7BC9606FB6F29705EA21C
+:10D430001DCF61A8CF4BD4132F1BAF5D75DE82F8D3
+:10D44000F4B80FDA19F41CE511F73F0630B93713B9
+:10D450008435381D1914EEECB0706B3312CF09B758
+:10D46000B29DC3BD94B8F17C9B1A0EE24C44DE5AC7
+:10D470006E3A84EB190A8F2F3C3C217030FF5D9C83
+:10D48000671171796A07256494811C341388DF045D
+:10D49000CB89C3E790136A79F473C9B973C89B1C2D
+:10D4A000C09B5ADE88735AEA52D873B4EE82737AFC
+:10D4B000AEDD5118A73F697596C2387D95FE1F35C0
+:10D4C000E09F25F890CE7E3FCC7939E041D2B3FD84
+:10D4D0007AFA4626ACDB098DEBCF601755656C41B7
+:10D4E000B9D30BCA81F2E3585A07BBE7F1A18EF119
+:10D4F000F01EC966F413E95CE7C40CA68F424BA288
+:10D5000038DFD8B7F9A7648C639D87DE23E1A15A81
+:10D510001EE77381BC2F8F4693A747221E89DA7FAF
+:10D520003D1583D08EE819A1D742F973FB893D23BD
+:10D5300032717CB5BFD833A4DCC8BE7BE524283B60
+:10D54000F5CE4DF3C14F1A6D403FE93D7E2E704A36
+:10D55000343B47F51EEC13D37E538E9E4900FDA548
+:10D56000F6377BF6CFAEB41686FA9D14CE890067E7
+:10D57000FDE79A3BE0D9C5FAA1F56B7E24DA78BACB
+:10D58000AE6BCE106DC985F8A5440671517CC4F60A
+:10D590002694655F78E30AADE07F0AFB81FBA7E78D
+:10D5A000398F54EE67F6C28433245B5B0A71A6019F
+:10D5B000B87F2395BFCDFC565E8A7D91716C0A645D
+:10D5C000AEC6E4D6A72ACE23256969395BF68D82DB
+:10D5D0007A2FF1E23E89DA9F7D8BC7A1A85FFB20FD
+:10D5E000D0ED7A7E4E89AE483CD06FF5EF3E9A7B07
+:10D5F0002BCA8128B487FAFDDA9D1A3C67D0A1B501
+:10D600000F1C0F7EED9A0CDB5A5AFFCC9BF8E06B97
+:10D61000B46CB2FC887813FC5BBFE63BC4A7A8F7E8
+:10D62000F0B86F9B8EEA1F5AD6FFB78C7AA89E90EF
+:10D630000DB86EE40DFDCA20BD48DABFEDC7FF4846
+:10D640002AF76A0081A8172BA7DA69BF1AEE7F10A4
+:10D65000F226AB73BF8BB852A7DAE9B83589BCBFE5
+:10D66000EB21561F21DA1F66FD33C478FFAAC5FAE5
+:10D670001051E7E3E588FA7BAC9E22BEE767F5022E
+:10D680005137B3F1CDACFFEE6D3BA6823D22E4FDF8
+:10D690009E0CAE1F8B48113F9FB30FE57FE47329AB
+:10D6A000CA76AE1FE63D23BBF423617D2647BF0B40
+:10D6B000FCDD2EE119BAFADB7418EFFE26AEBD7060
+:10D6C0005590BF22CEB138AACC76B0FF1A5ECADA26
+:10D6D00022F3733D607F10BE1F5D2D9B707FE2D4EF
+:10D6E000DD4CEE47B2DF16AF794DB19E21EDB2C4ED
+:10D6F000FC71D8B8A3DF3B79CFE0CDE85FA47B71A4
+:10D70000FFFC588624F6E949795CE0DC58421AB1FE
+:10D7100083BF9AF03295CFB0C65F78511E2F7E99A5
+:10D72000C57F1B1E7913F5DE02D98AF1DCEBF29D71
+:10D730003D809F5EB317E38A8BD7ECC679FD9F1CB3
+:10D740006E3758FCF9C1F8FC3E14FFA7CF83FFD316
+:10D75000BF26FED571E765A63D08EFB28B3CDFD64C
+:10D760006B66FBA236BE4E4735D6511C5F719910D1
+:10D770003F5FE4CD8C95E1F0B177103BB7F44E19E3
+:10D78000F845A79ACD04D67DF6AA7F143AC3C47D86
+:10D79000D5FEC0CDF0CDC400BEAC9921F84DCF2C44
+:10D7A0003B277E95EDBF307E076B7D7A1BECA31E79
+:10D7B0002138CE28EF517DF0F99889994C0F0FEC64
+:10D7C00064FB46EA735F1333CDCC6EE2FB330DB5D9
+:10D7D000EF8C83FD19C10F13A2493BC4DB295DDB2C
+:10D7E000385DDB80AE05FD06F669E87B61F82B400D
+:10D7F000BF4471AEEF9A4C6E5F06F07A7DE6B9E9F0
+:10D8000056D9FE0BE3B583DAC3B8AFB9330AE329BF
+:10D810006A3CAFE47815F86ECD64FC1F09CFAD808B
+:10D82000E7C49F1FCFAD9956453C42E03B927E52E4
+:10D83000AF8F9877183E2DBB143ED5677339A5F589
+:10D84000E17953F5BA6F0CE5A77BCFC34FF7FE9A8A
+:10D85000FCA4C69BBAACE7FB9DEAE7CF678AF3015D
+:10D86000BF0C1EFF7F8BA7CF697E5DD13E6FCD7E43
+:10D8700045FB7CD701457D9CCF5B05642EE2E357D9
+:10D880009CF0BF09F54B8DB3478AAF4FD9B1440324
+:10D89000FB6FE55E16DF6FC8764A5974DDDED3B8DC
+:10D8A0005BCD14AF9777B7CBB81FE62EC27DC055BE
+:10D8B0007C8EDF8DFBD7A7B752BAF98E1830FEE900
+:10D8C000793D476B2D08A5838AD332B107D98915D5
+:10D8D000C6582DD85315D4520E4737FA2C467778B0
+:10D8E0001E88F2FB4C23D125503E9F3953C2F34F83
+:10D8F00033093B574D4B8F93B64FD1128F81D66B67
+:10D900004C5A8F01F7FD58DEC374364D62D01217A2
+:10D91000B4938478F483A7C1433A5FD92EE379B6F0
+:10D92000E9E56CBFF02653BB0EF4E98DFB6E3F7941
+:10D930002B6D27EB5C65ECDCB6C863FB587331FBE1
+:10D9400080FA2CC6E77D12DF5796743638E7AA7E38
+:10D95000EFE34C06EF1479AD0CE75FFC0708DADD66
+:10D9600082EF287CFB0CC52C4F630CC049749EAC25
+:10D9700018B09FEFAF82FEF587AC8897A6F2B58509
+:10D98000B08E4D13A5CF0D8501FFA669CDF768A711
+:10D9900057CBCFB742FF53475868FCF21E970CFE97
+:10D9A0004A207EE99B0B7C793E3F48CCBBBBC583BC
+:10D9B000F4F469CB3E2CDFBBE2ED32B0337C2DDEDC
+:10D9C000B0F1CB4B8D17883881881B0839F0D96DA1
+:10D9D0005583812E6D595C2E18A561201788969568
+:10D9E000425E8ECA0A91AF63B2CEAD5795EDBFB01D
+:10D9F0007CBD503AAF4F627A514DDF6ABA16F44C93
+:10DA00005F2B93E8776FA2F61EE8D559C455504FA7
+:10DA1000E5ECCC256DBAB1D2A5D3F532D317C92424
+:10DA20004CBECAC5CB732BC22F57C9E81F88F30A57
+:10DA3000621D1AB242ECA115E759B715BFE6BA85C7
+:10DA4000EAB52FE65E9A5E230A7BE0EE50B8DBCEA5
+:10DA50000377DBAF0A778A55E4D1CC953581BC11C9
+:10DA6000384F0C765C9F9BE545D6A5B4C5E0E1CC6C
+:10DA7000727F0CD88D4B77C94887446BD70EA1F4C1
+:10DA8000BA84D36B0FF17C00F4B864DC12CCA7AB82
+:10DA90007B2CFCB9E246DE7F99A9430F702EDBAAEE
+:10DAA000ECD7C8CF15D73FAF8C8B368EBBEA388CFE
+:10DAB000DBA83ACFF35216CF4B2C26C5ECDC85D22F
+:10DAC0003E5597BD2D4411AFEC3DD382F180DD5919
+:10DAD000FE075CC383FCFFD0F5DB97756E7B4ED9E8
+:10DAE000FE2BD3AD6CDE8AF955174BB76B73EDFF88
+:10DAF00080790B793C1B6413FDEEECD70C6E17ECB0
+:10DB00008F9659597C5372B7C27E5BDF4F04E3474F
+:10DB10000B789C33527EBA386F30FA90BB959D37A4
+:10DB2000B0CB902F3A6A9FA30AB62B4ADE69467B98
+:10DB300024E2BE95C8B3E2E7872E54AE89B8DEA8CA
+:10DB400013CD6867D9BC16B487C69C6E7F13F4E307
+:10DB5000CF15EF16FA706C3CC35BA9CF81765EAF30
+:10DB6000CE53F621D809AF4485B51362B3D9FA4D27
+:10DB700075CDD7B1BCC390FDC0D86CBA1E53B9FCEB
+:10DB8000D718ED3AC053B5DCF3E00CA01FAF8CF111
+:10DB9000BDD5BF7FFFCF8F5ACFEFF73759BE43BBFD
+:10DBA0002192FDDFA461F917C555563CE707FE1425
+:10DBB000C4F744BC4FDD7F426E651ACCAF5A1EE7F6
+:10DBC000B5C37C36B1F9445A9FA635DF2AE28B9162
+:10DBD000BEDFB4ABCCB220880F6ECE9684DF613945
+:10DBE000660CACEF85D2C178FF4C85FDF3FFBA5FC0
+:10DBF0003145A6A625D59F05929BD9AF84D9B1B34F
+:10DC00008917CBB9C48FA593B0F3F70B880DCB9BC5
+:10DC1000793EF3811CE74C58973E9D7F109E9F7C78
+:10DC2000E9DFF9403727AF18DB06DB5EBF941DD76D
+:10DC30005764C5EFF7EDFC77329C83399F5C589DA4
+:10DC4000645F9E1D66FFF9EF15F24C966FF518EABA
+:10DC5000891A7E1B0399C8F6D1484A0AD243402E3E
+:10DC60000EDE2CE422ECCF167CAE61E749964AEE3C
+:10DC70000CDAB5D3A741D62A5894E296A1DEC1DAD0
+:10DC80000B1A62DD12AD178C8E62ED2B62DD104730
+:10DC90009F437CC88FF3A82884723E61726F21B1C4
+:10DCA000B37C07E24F053B6C5197919DF727BE74FB
+:10DCB00090EF8511FC9FB7B299DF3C3295C9F39183
+:10DCC00095CA38C53D5C0EF4E6549EC8A6E5A96C1D
+:10DCD000FBBD80979171DE8D0F9462DC9E80FF709A
+:10DCE0007CF46F71BF51BC97985BF900F47B416283
+:10DCF000E7D35DBB0C783E82BE31C81174AEFF40E5
+:10DD00004ED523D0CFCDED928878257E45FE6C8010
+:10DD10009F5C38BF91E07361BC9C3E28C7EF62FDF9
+:10DD2000C5ECDA69EB4C18E37781DD9B98EB7C1648
+:10DD3000E7AF27C404F37FDCE0DE82F6697332C408
+:10DD40002B973C61D080DDF01155B79087F2498B5D
+:10DD500011CB7F503F18CACFA81F0CE5E7D40F8620
+:10DD6000F29FD40F8672D1E922AA2C283FE5D8DF92
+:10DD700064F41D3E4FAB4BE05B7C7F971EBFDF9B87
+:10DD8000E344FCF6AFF72BC40D9B3A2FC4FA87C6C9
+:10DD90009D83DE22CB198617B15FA86EDFCED7B583
+:10DDA000B0438BFABDB0D317B338A8DF816C3DCE3A
+:10DDB000B360E7179887DA6BE9C7AF5DA2204FD150
+:10DDC000B0FA81EC3AC46F6F8EFD04C04DF9FB30A0
+:10DDD00094859DEFFF01F27FE8F878EEA04FF23FC7
+:10DDE000847E800A0E351E045C2FC47A37C2FB2F56
+:10DDF000EC4C0548A8BC218C6F808EA470F0AEC599
+:10DE0000F95E6FF097425ECBF567E5B0E78C7B7308
+:10DE10002A10CFEB04BD093CF1F5BA54BEEEDFFF8A
+:10DE2000E6744AC43D1E203BADA087CEC480BD57DA
+:10DE3000C3F7F73B3BD2DF03F85CFB64926145FA22
+:10DE400055F0DDB01C4627A22CD8A577C03ABDB04E
+:10DE5000EB58FACD265C97F445B47F744E8622FECB
+:10DE60005830FAA7FF782001FB5BE0533792CDD5FD
+:10DE700070FE6496F1F5BF0248732C9F57C3F99367
+:10DE80007949D25E28E75B53AE847327E27CFCC2FB
+:10DE9000EC8ABDC04AD7DA6AD04EAB00E112A40FBB
+:10DEA000AA8CD1B029D85FAFB6C42BEA57250D5341
+:10DEB000F49F6C4D53B45F939DA76817DFBDD65692
+:10DEC000A2E83732CE9F0AFE198503F9816C93F1DF
+:10DED0009C5EC1CE4357E7D1FA94A7A6DBC02C794C
+:10DEE00081B74FD95EE586F5E8A3F8D45303EA4439
+:10DEF000F95D0F3D0083A9ECFFFA5D4FEEB55B2F96
+:10DF0000C2FE8F60F70B39BBBCCB580672F642FDE0
+:10DF100000F5FA8CCE51FA0591E8A69F2F242BA389
+:10DF20009BFD32D916866E08B99DD3212BA71C64A0
+:10DF3000F963172BCFBE0479161FE08FFE52159799
+:10DF40001BA9B7BDB70AE2F4EFCA04F3F1785EDFAC
+:10DF500062F85D0ED03BB979F31D4312F0B90BECBA
+:10DF60005CC82FB5D3F157E470FBA9FEF53B86944E
+:10DF700006DAC9EACF15FDC96DD27A457D5D8AB250
+:10DF80007E77C5FAE0F723C9C5C59BE6EB9D98FFF0
+:10DF900029D9DD61E483984FF51B5178AEEF3A380B
+:10DFA000AF421F35961ED0C23EEC7511F4A8903FCB
+:10DFB00037CAA4395CFB6D392CCE7FED1B51780E2E
+:10DFC000E662C7FD88E212CF19BECCF4E84703BD74
+:10DFD000DAE075BF93CFFB64D9FDBFFF11F6475F51
+:10DFE0002178EEF3642C93FF851DC7351AD0830387
+:10DFF00018BD145A7C1AD02B7D75D12E38D7DFB4BA
+:10E00000D4CCF25F52FD1F18E9D2DF97F3CE1F8DFB
+:10E0100074DD3E8624C820BDDA074E11AD6F7AE666
+:10E02000ED69EBE8FBD7BC11E5D15C023C9BF8BE87
+:10E03000C4C84AC6E773816EB87E81187BD31DA41D
+:10E040005FDF805C00F8A1FE5ECE7B87FE0876F87D
+:10E050007EC6E770C24EEDDFCF0AF2EFC9638C2FA8
+:10E060008DF4879D5352F1F79E36BDE99C7CDE8E80
+:10E07000E76E2E94BF77E4F03CE1C8FC7CF01ABA5E
+:10E080003E4DAFB07B2D4E7565605E6C247DDEB479
+:10E0900049463EECD75F5DF22437EA29651EBAC0D7
+:10E0A0002BB1DB903FC5FD512BC7FFAB16F4E6CA81
+:10E0B0005D5A764824D27736C8C41AF49D17761B69
+:10E0C000EA30CF8DCFBF4FE8EB5D3FC455E4B3726C
+:10E0D0006D18BD47F5B42E01F4748D847EE5E15DC5
+:10E0E000832B014F8725E2B162DE163BA73C950DDD
+:10E0F00007CF4D786F4952369E4F16FEA5F02BA7DD
+:10E10000EF9A9E0176E5071D0B0ED39523C772D2B9
+:10E11000908F661017DAC187631D23202E31859FEB
+:10E120000F381CEBEF01B97C787CB404FBFD74FC68
+:10E130007530BE80EBB0CE3182DD3F21CE25E75E6B
+:10E14000D27D71D5F26D15D7C0FEF66C6201BFF2BB
+:10E150007A99D9B9E42F8C3F85DC6B92BC7130CFB2
+:10E160000339B5A773289E06AFB997C75539DEB4F2
+:10E17000EC1CE285DAB9FDFEECD312BB17C5C6EC88
+:10E18000FFC671DF3C3803F2E4A8DF2DD1F92CE89B
+:10E190007C1DEFFF51FBD9FDFECEFF309E1AEA2F0A
+:10E1A00039E27283E2E46ABFA9DF4E17F6DE367603
+:10E1B0004EFECDF10FF72EA7F5D5DBA2118F5F3DF7
+:10E1C0006170811CFF6A8B01FD9FAFE2FCDDABA09B
+:10E1D000BEBDC0E6C2AFD914F7A32DD1583F04FD90
+:10E1E00043FEA6C37B3D8E3F6EF0C0798FA54FE600
+:10E1F0006C017FEAF808EB73CF433CF0B944BC678D
+:10E200008038D9FBD7717E04FEB252D343FE2F3340
+:10E21000DA114B770C413926D6EFC4E3519847FF0A
+:10E22000D5BEA903215ED6A37911F378886C7281DB
+:10E230003C5EBE250AEDC035166729C05FF55FD785
+:10E24000CD2881EFBF9F48009EBEAE1D18AF0CAC1D
+:10E250006F78FD7EAA2B8DC9817E7DCBCEDDCE83EE
+:10E2600073B76978EE760C8CDF40C4FD8BECDC6D07
+:10E27000B12CD931EFE09EF079E4D7E432FBB15E06
+:10E28000C44FE2893109F8D04910DEBE7BB2B680B6
+:10E29000BFB330378E7FD7CFF32505BD7537BE8628
+:10E2A000F113033BEF17157E1F7B462ECB2B5E6CC5
+:10E2B000FC5E11BF695CF39322AED2984F50EF160B
+:10E2C000B75A4B56D07215C7F3EA54C74D00DFB2A8
+:10E2D000F6FB5F7A07F1F2D86F3E86EFEE3361DC32
+:10E2E00086BCC3F0A7F667161BBFE5FCB4596107EF
+:10E2F0001F7BE4433C6F726C675E21ACDB02D97B11
+:10E300000CEEE5EA357B3FBD9596DBF71DC47551F4
+:10E31000CF3764DF5E6272A51EE08887F32E8EE63B
+:10E320005CDC1766FC7E746301E24FC473FBBE0ABB
+:10E33000EF6F89798AF1C5FCC4F8A2DFFFE2EB75C3
+:10E3400052EF2D04FD9C06FB166581F69331DEC26B
+:10E3500058133C67792D27E3683D886E7EA9FD9DA3
+:10E360009B789CE78866ED2D7A4A7F3DED0FE89C0F
+:10E37000C172F422F775C47CC5B9529147FB9FB9AD
+:10E380003C9E3D828C88907FFB646E59D8FC5B7C00
+:10E390001E29FFB63FDFF607966F2BF26B4BAB34AF
+:10E3A000CDC179B6421E96E6D1E7F9B0EFAFD4EF12
+:10E3B000A52395FD23C9C7F1796C1D4BE3C3E7BBCA
+:10E3C0001EE2EBDC4A3CEC1E42AE17C772BC8BFB74
+:10E3D000BF849DD2C8E5B6C8F31CDBC5CE6D8EE503
+:10E3E000793B540A609E6BC83D6F4979A857C53D7B
+:10E3F0007D121D6B765CB87C612FCEE30AE2C7D23A
+:10E400004E2C5A2829FAB19C481C585E499AB19C56
+:10E4100044DAB0BC9AB463792DF16249723DFCBC18
+:10E42000E76D2CCF74F2120DE8D7D219E1EDE21F9F
+:10E43000CF8B0717DE2378B178B892B0FBFE42F09D
+:10E44000313C1BE95B8D0F75BEE678E2C38B4B2632
+:10E4500000E1A6811F6CC5F3AD55C48EF5EA0BC46F
+:10E4600043B9CFA965F9BD2A7C5485A78BB31C1F7E
+:10E470001B40779605D6A9348FC901B15ED4114BE4
+:10E4800002F9AF5E47F1BC34BAF23B2B1511C3F26F
+:10E49000EE988E79DC2595ABD268BDE0B907597D41
+:10E4A0006CE50EC8F31E99F7F074CCFB1E5959A207
+:10E4B000B3C17D729BA64FA4ED4E7E6EDAC9CF4BE1
+:10E4C000136791E29E2CE7DA5BF0DE31E708930DEB
+:10E4D000E01479E1721ADB5F4D9EE4794347FBED6E
+:10E4E000B23807E595C139734F8C15EC84B5D578F2
+:10E4F0007FD49D7AD65FDC6723E013F7DC6CDF9E68
+:10E50000B74A4A3DFF3CE8F8E97989309F0CCC8F47
+:10E5100073EE94783E5CE5E099546EF4787504F2FD
+:10E520000BC4F72CA9CE1C980F81A478CA17C3B8C6
+:10E530001EEED99E9707EB549AC7F30713524A0071
+:10E540008F0B521DA5D05FE44597C2BA24462E67B3
+:10E55000E7D98BA1BFFAB9C8CBAECE7396437B5334
+:10E56000F419CC37EB2D7A7FBD2F25344FBDD54E16
+:10E57000DC7A942BCAFCF4BE457ABCCFA9D4E16CFA
+:10E580008523CA97CFF68FC27CE13C67158EABF727
+:10E590002517D1F7FE3895E5BFABF3BD77EDDEAFBC
+:10E5A000C86F177CD69FDF7E8AE5B707F8EB9155D9
+:10E5B0002428BF5DF08DE0BB3190DF1E03F59C4544
+:10E5C000D06FFCFBDD98DF3EA1DBC7F3DB3F54E6F9
+:10E5D000B7DBFF7549F9EDC7F9BD6FC78DECBE24F8
+:10E5E000719FD4CA9D6CFF77A5C4EE935AF9277624
+:10E5F0009F94F00BEB387C0DFBB7AD877DBEBAC79F
+:10E6000016E27D5484DF876AA53FC17EA1B89F547E
+:10E610009D07D304FE20DACD1EB4BBD4F9304D8F54
+:10E6200055A13FD8A4B2A36FC9E3F11DAECF08B77F
+:10E63000FF96F077010E13FA677AB43B573EBECAD5
+:10E6400066813AE72BB2EF7912DC9F3C168FB4203B
+:10E65000F86CE90609ED5781BF914F19EC789FF1ED
+:10E660005383D16EA5F636CF6376337F9BD20A9C57
+:10E67000877F21D69F0A76F20BBBB26D54C29257A8
+:10E6800023DE43FDBCEA1EEA2715F7509F82FF8177
+:10E690009D7642E386714691ECFBC6D17AD909ADED
+:10E6A000CD6D0DDCCB7CBEFB8705FE0D7CBD2EF653
+:10E6B0003E62F5BDCF22FF417D2FF19DFC5EE2F170
+:10E6C00011EE2536C85D32DA0FDF6B15F7135FCE1A
+:10E6D000E12CB71237DCF73BA647AB58FF725F1B44
+:10E6E000017B28EA90561147305895F597F3787CCE
+:10E6F00080DF2F128A6F533F3E0D88CFF487119F22
+:10E70000AAFB9E059EFAEF7B1E6E42BA1FB37F875F
+:10E710000CF2E062EFFDFEB5EFF93EDFBDDEEAFB95
+:10E72000BAD5F77347BAEF5BAC7B9167A5A2BF7A06
+:10E73000DD4BF6FD4E791F355F6F17FDF939D7FBBD
+:10E7400007D57AFF1B2E40A37CF8F7981377035B5D
+:10E750004E896672ADDFAF1FA7433FEB3D6B7C95E3
+:10E7600019F89FEB2907D753E4B676DC8777707AE0
+:10E77000B179D93982E223ECFE8A521F3B4F30EA4D
+:10E7800044F8FCA0EBCB25C5FE6EE8FDC52CCF7888
+:10E79000EC19764E4FBDEF2FF2866AEC51CAFB1B87
+:10E7A00022E41189380EB5E3891EEC780DBBCF2E1B
+:10E7B000CC7DC79BE4B4E03C2227C677A619BDC92F
+:10E7C00040CFF129CECBF21303F9461320AF4842D4
+:10E7D0007F90E7E124DC0071C73E48B21D4AC8675C
+:10E7E00077C7DE80F70624108B6F1473777176F984
+:10E7F000CE6C18E7A864595F42DFFDFB986F924129
+:10E800003F19605FBB18F77D73A15D7D4FBF4F63FC
+:10E8100045FBC2F53B09FD876F60B0D141FCBA41B1
+:10E82000C7F31A557FC780FB53E2EF181CA543D4EA
+:10E8300051B93DA793E5512F4FEAE17E18BBC7754B
+:10E84000E17013DEFF44EC2536E6870BFF6A987C07
+:10E85000317AF37CE78B96277DA5F073C9F3F11726
+:10E86000B49F18809B8D7FF4AE68D43747EF1A8130
+:10E8700071BEC0F8BDE8F7CF69569E339EB7E62358
+:10E8800005FDCD777DAE68F725F875C328FCBE97EA
+:10E89000865C398BE2EFE44EC328E033BA6EF3F2C4
+:10E8A00083FC7BDF3D5913991D703E38BFC17974DD
+:10E8B000F373A202CE4F5B8E60DDD7E2539DE7710A
+:10E8C00029FC5251EADF20784F8E5F1A600B1767E0
+:10E8D000399ECFECF66E9E07D9CDF320BB79DE6270
+:10E8E00037CF53ECE6798A227FB45B2276384F31FA
+:10E8F0005B723C315FC2FCD1DB00CEA665FE42C834
+:10E90000B76B1AE99B2BC9983FDA925F16367FB432
+:10E9100010F2DE5F797EF60D60D79F18E0C27B496A
+:10E920005ECC9F7903D8F527F48C3F5E7FBEF2065C
+:10E93000C81B7B7CA8F32E18E74B49F6203DBF226D
+:10E94000E17E2AB1FBF4B5E7C82F6DCB67FB0BF76F
+:10E95000E7B37D0C513E97CFE4D9EBBCAC96EFCE3C
+:10E96000C4BC9F4D06CCFBA1DFB16B82F6FFD5F98D
+:10E9700059C57F3178406E8838CCD67CB6CF0A79BD
+:10E980005B30BF84FB0C2C6FCBE74D863C2F38EF00
+:10E9900003F7669043C4CEF2C0D8FD7D621DB6E693
+:10E9A000F3736770A17E69204FAC61FFD14F418E38
+:10E9B0005C97EF7C1AF99FE72F35C4BC8EE7265E83
+:10E9C000CDB7E27B74BE083F9507EB24C473481CA7
+:10E9D000AE3DBF2C34FF3D12FC2717791FCA4F09EB
+:10E9E000E44F05E54DBD0AF310708B7904C6393745
+:10E9F0005D8B785220DE756726F049B78ED97BE2B1
+:10EA0000BEDA62599A574BEB6F71BC88FE9FF2F5E4
+:10EA10005C9DEAD80FF358D6CCE26EA2BD4F6AFBDC
+:10EA2000CDC7B06EFB4D28EFD4DF17EFABE16DD84B
+:10EA3000BD1FF142E19D0B7006C1FB617E507CF071
+:10EA4000E4AE0F1F02945F2A9C179BCF6C18C0EE98
+:10EA5000450C8D4BD3850DB2A70CE2FDE1CAFBC678
+:10EA60000CF0F711E8F73AB81FD2C1FD904E1DFF28
+:10EA7000FB352ABFB4C3CBCEF57424E9F1DC0EE13B
+:10EA80007F6F41E8E1D507D8399FD52904DB617E46
+:10EA9000C00F926F2FEA85FE7BA324AAEF285D7C2E
+:10EAA00063719202A06BE72AD413F265261BD0F59E
+:10EAB000F6BF5DCDFD2BA677CAB89E298371008E67
+:10EAC000FC81A87F4AF97747199BD1BE1D4D5C3C5C
+:10EAD000DEC2E31277ED55F865FF17386EB02750A8
+:10EAE00068000000000000001F8B0800000000000C
+:10EAF000000BFB51CFC0F0038AAF9B3330E4593198
+:10EB000030CCB1666060B56160683047C8BD114700
+:10EB1000B0A9897FCB53A67F932403C31620DE06BA
+:10EB2000C43B2449D7CFAD8D6037AB3230F000F90C
+:10EB300021409A558381E1B51603032F903F03C806
+:10EB4000DF03C42780580528F612480BAB31307C10
+:10EB500001D27C40796D20FB8A1A76F3F9B5F1DB9E
+:10EB60007F5C0395FF138DFF401DBFFE2C4D02E11E
+:10EB70004B401E1BE6B3273F3E8228D03B10F830A7
+:10EB80005ABA7E6CC2C0F0CB9481C10E9AF60F20A7
+:10EB9000C90700C59E9840E34D8F81E1961903C3D4
+:10EBA0005E1CF9E20450FE36503EC61CBFFD0ACC86
+:10EBB000A87C615E4C35DF9810ECC942A872C7840E
+:10EBC00031D5F38A323000002621667DD80300005B
+:10EBD00000000000000000001F8B08000000000083
+:10EBE000000BE57D0D7C54D599F7B973EFDC99499D
+:10EBF0006E269310C24002CE2411A2243040C09849
+:10EC00004CE0E68B041270F87829565A27E8226DFA
+:10EC10004111DDAEEF2E2DC347435454D8A26BAD46
+:10EC2000BFDD812AEDEE6BFB0B162D9B049D8480CE
+:10EC300068F88868B5AE6D376AD7061B6C88C1D294
+:10EC4000DF4BCB7B9EE79C93997B33930475B7FB9B
+:10EC5000BEAFFCFCDDDC7BCF3D1FCF799EE7FC9F88
+:10EC60008F73C66AB111D775845C85FF1610327F29
+:10EC70002221646EF42A9E57D8492879262169F604
+:10EC8000435D33320859A8C9BE1A0F2113EC0D9DFC
+:10EC9000A488903262F3D8BC84B44B3FEB9A41EF26
+:10ECA0004FA4587D3602FFDD4BC83C4236DBE99F5E
+:10ECB000B4FC894BF44ABF3FF1474B98488454CB8E
+:10ECC000F54482EFED122FAF6B4B3209A922ECBF56
+:10ECD000F99748152D46AADC77D593198454BA685C
+:10ECE000293B7B7795952784962F25AC7EDD6E7C1E
+:10ECF0005F4A765F949D70D72F070A697D5754E36A
+:10ED00007B77CD6F8913CAC53C8771C01F940653AA
+:10ED1000494AC687C9F4EF9BC84D57657A55C61155
+:10ED20007273942EE62B212142C613D2C2BF5748DC
+:10ED30006006DC13F23CB69F2EE858DB43DC74DC43
+:10ED400019C5C457430738A1566F07BA9456A91E70
+:10ED50001BBD6FAF9E37B14723E4BB179AB3480181
+:10ED6000FD3CBC01E998C1E9D87EE1C577EFA6DF9B
+:10ED7000FB6B89CF46EF5BADBE898182E1FDF1D7A8
+:10ED8000A63B08AD676FA02319EB21E4CF57337979
+:10ED90003DB984B40572528371BE13D7C7B6BA08A1
+:10EDA000B145EFF7E8A4B6591B5EEE4598CCB950D3
+:10EDB000FD1AEC6729A7E57725B2BA19DB5D8DF35B
+:10EDC000D4CAFBDFA97724F714C0FB48B2858E2391
+:10EDD00074D1429EA555B4F55524417FB7EB9608F2
+:10EDE0003C6FEB53C3400FE26ECE5A5638BCFFADBA
+:10EDF00017D7CEC671053718DAFDFB3E3A5E0DC651
+:10EE0000F77CF2425ACF409FC525D379DDCB9FB71F
+:10EE1000069B935DF05D6F3ACEE7635BE9DFD3124B
+:10EE2000D3E3B1F95FCF096A50CE6EA447DFC0C902
+:10EE30005C3A6F6DFB141F8C6B347AFE3D6F47DCC0
+:10EE4000A7FB22952E5AAFBFDF27811CA5F71132F1
+:10EE5000CE0B72D176CC09F35B4F502EFC810AC7E2
+:10EE6000F56C1C3ED903EF4FC9C01F7E5704C73154
+:10EE7000D41FE8DF34E8A71BAF4FF2F69E8079C4B9
+:10EE8000F16D774CA5FD1D2856B09E03FAF672056C
+:10EE9000EBBB1291811F37307ECAF004B75981FE57
+:10EEA00077125FC803F5121CF73FF2F13FCDEB1369
+:10EEB000EDB4F5A5972BD0BFD5C40762522D6F696D
+:10EEC00087EFFDEB59FFA73CB04902FA5DB7A507F4
+:10EED000AF61DECF3DF03D2D90BDA95F02BA4DBEC2
+:10EEE0003F82D77DDB7ED90EFD4BDD491CA00BF6A2
+:10EEF0005659D2E0BBBD0B2739E0BD3340059FEA30
+:10EF000003BFCF756F271DCFBE2A05FBB9AF8FD2C8
+:10EF10009F9673865C3E906B67C8C3AF3E1F946F2D
+:10EF2000E5E338CADB7D998FC719D279B94D055011
+:10EF3000CE190AE135CCC7493C1B91EF360BBEB365
+:10EF4000066F8479CB18246E42E5F9E8A78B274237
+:10EF5000BBA27E73F9834FB5CC817E8F1F24EF59FE
+:10EF600067C035D200ED4D837138E1BEBB41423DF3
+:10EF7000154639F2F75908C98FEAA90CB2ECD55BEE
+:10EF8000F0AE1AE548E881D23ED522A5C6CA591589
+:10EF9000CAC13E2E07557D11E4132A67C72C944E33
+:10EFA000A10B54CE287FB5062C38DFCFF4ABA88751
+:10EFB000497E246B59CA70396ABBB86E36F45BC897
+:10EFC000D370FDF1FF867CEDA3E308C6D16BA23DB3
+:10EFD000216FE6F7A3CA9B2B84F2D646E52D04F4F5
+:10EFE0000C581C79207F4D1694137755733B9397DB
+:10EFF0000D286F1977B2FE4C58134639184DEEF6AE
+:10F00000795CE50AD4BF9AC9695BDFFBDB6C301F12
+:10F010006B08D71357DAE1DEFF00936BB39C99E5D9
+:10F0200030D5DF8DF2E9DDD94FE0EAD9518F7C4D43
+:10F030005B71A0FC2590C33690C3A2FF7FE4B012A1
+:10F04000D6712A7769DAAC4E171DF7A27EC2F0900E
+:10F05000B6B713D6F1EA6C1B5BC727BF7DDB3DF467
+:10F06000FEA43519E97F723C7D5804F732CA5DBBB6
+:10F070007757F666FA7E518684EF09598FF25D2341
+:10F08000F0123CA2F253DE239179E950EE833D95D4
+:10F09000F4FB577B890F5EBD9A2D637DC7FA0893F9
+:10F0A000632E9F357CBCC7F8FB81CB240CF2B900E2
+:10F0B00020097DFEE9F9FE2976FAEAF7962B8524E8
+:10F0C00087AEC79C6F05CEA8E6F2FF6A86AC83DEEA
+:10F0D00038B625254CBC585F04F8EDD5076C61990E
+:10F0E000B6379097FB5C8400FEEB9FBA99BEEF7435
+:10F0F0007D92122B9FBD7C1E3EE2F3DBC7F144CB19
+:10F10000F4C03289E2A257F37251BE06F23E994230
+:10F1100028A9EFC9FDC3877025A4590DA40CAF47DA
+:10F120007CDFE50E7E59A2F3D31BFEC009F37DE11F
+:10F13000F02733E04ADCE310778D86CF4A040EEBEC
+:10F140006DDE01388454513E9917E59309BDCDC752
+:10F15000806E257D0C8F91DA8D0C67BA185D28FEC4
+:10F16000CA82EF5EE2FD6A3D4F719A86E50CF5B406
+:10F170005A7BD60458FDF87D898BCDEB907EE174E7
+:10F180007F529208C3896CFE4AF8F77EA5F9BB80CE
+:10F19000B7FD2765DF36FA9DFF724F1589A3870EED
+:10F1A0004869C8AF65FD467E6DBD705006BAD0FE99
+:10F1B000CAD0DFD2DE6699E971C66725621DE97D96
+:10F1C000DEA0DF45FBADBDCF239E1FE855505F2578
+:10F1D000A26B071FC74B5C9FB4F179A20C85FD3F62
+:10F1E00046FBFFD008DF570233C6F45BC8DF82CB93
+:10F1F0004906BC5ED69F6EC2FFC6FECE57587BF353
+:10F20000815E2431BDB648E9BCFECF462FB35E1106
+:10F21000F5B6021D0B86F78B00538B7ECBFFFDE905
+:10F22000DA067F30FBE504C819E93924833C56CB64
+:10F230001AEA93D22A89E1723ECE7AF89636552B95
+:10F24000E4CA23A19DB7D82F856B006FF87E807626
+:10F25000E24091CD037A688267AFD213C36F8BF916
+:10F26000F7A2DF47B7EA38DEF6B96F6741B9A3D72F
+:10F270006FCB867958E4793B7933A5FF092E772D3A
+:10F280005B6BB15CE965F2C82C98973C2667F3F993
+:10F29000583AB9DEE9E0747B99AF9B6F6D0DE2F5EA
+:10F2A000CDADEBF17A6EEB26BCBE7AF9790DE6AF07
+:10F2B0002B3F17D7AF5AA5598967579598D6859789
+:10F2C0003C14EFD0F2757D6B77CFA2E33E75D98207
+:10F2D000FAF9547EEE8878A585CFAF28F78AFB0728
+:10F2E0009540B7FA5EDA5DEFF0F2A5BDC6764B89C0
+:10F2F000D40CF8AFD4F7BA42A87DB4A468BF168B7B
+:10F30000635A2F641642BDADD2AF56CCF124EE47FE
+:10F31000A9BF1BC7B924F28EE249495CEEB4D25DA5
+:10F320003F07ED54A68F4A7DEF55E9B4BD9A82FDA3
+:10F33000F5C817838A05F8A2BEE0109F5F17CEC7F5
+:10F3400012B19E15C9B561E84FDF00F6B3AB401EA0
+:10F350000FFD7BC822235F2EF1D810CF266C7F5083
+:10F360002111902F2582F3748AD6037C719ACA31B9
+:10F370007BDECDEE69BDF0BEDD6BD37C404FB7F0D8
+:10F3800047AC37F0477DDE9C53BE22584F64C4978C
+:10F390005D972B94347A7F1AD6574F943F4B397F21
+:10F3A0009E8679073E0ECBB8FE09BC2CEA3B7A3923
+:10F3B000E79122DADEE9B035EEF7812AA33CDEE2FE
+:10F3C0004E36DC57658F33DC9FEE9BFD6600DAA37B
+:10F3D000FD073C47421B0CFD3F0AFA0BDA7349B8A4
+:10F3E000FE9FB852D5770F940B1BFB65EE47D7E510
+:10F3F0009CC757D27A4F1D96914FABDCC67E555EA7
+:10F400007AF314E8A73AAA5F806E2FE98A0EE33EEA
+:10F410007D3825BC8DF2E54B05AF27036EA0FF6953
+:10F420004B683B9584CD6F4586B19E537DEF3F3C45
+:10F4300013F0AE5D463D57F1C78E9D00AFCE16DD91
+:10F44000D709746E2512D2A9ECC20119EA5B1536F0
+:10F450007EBF728D913E1B578E33E97FA37FA9D269
+:10F46000C3FC44F37D17B1BE12F0FFD0FB0ACDE818
+:10F47000179A0FCA20A6DE32935FA8C4C3FC4225A8
+:10F48000E01712E5BC6498DEA7F7D8BEDFB4AE9BE8
+:10F49000E53BA1FC5BC87AF0A790FEE5A3E096ED02
+:10F4A000DCBF62D4B744D927C5E28A166B7332E257
+:10F4B00086594C7F91FEF4B8FE2AB31E21E43EE447
+:10F4C0002B4147E20A918C79307E5EC6ACFF385DF5
+:10F4D0009AE8745CC57520C4F18B27AEBC9BBFCF86
+:10F4E000E6F2BEB097EA4D58AF7DB20BF4C6A9CB99
+:10F4F0004403793C4BF99DB5DC7335966FEB7A9BF1
+:10F50000912F69795C064F5DF6A1FC062632F96DF4
+:10F51000F7D628694C7FC69577B31CF492D0134573
+:10F52000745E4FE5E53EBE927ED77558E8018B8E3E
+:10F53000727598E1DED37D9B915F0728BF02D98762
+:10F54000CBFD392D76DDFFAF9277B39C0FC9FF302D
+:10F5500079677AEBD4A005C7537949C17AEAAE102E
+:10F560005CC7CDF27F9ADB6F2FE96F6A3E580F0BB5
+:10F570003E40FB987C66796776486B2FC1F6CB2EB0
+:10F58000BC2FD3917F61F22EE45CC8ED35CBFB7FBD
+:10F59000919C9B9F7FD3C2717F02398DCA7F08CB1C
+:10F5A000ED4821F9E0676B91927CDBBD20EFCCEF59
+:10F5B000632E3F4E16FE587BE837745C0D9459520B
+:10F5C00029A937929E29C00F13267AF0FDDD969E59
+:10F5D0004CB8FF3DE9CF9C4EAF250A3902EBAFA4F2
+:10F5E00013F200ED92E4719135B309794C0EDA65AE
+:10F5F0005A5EEA8DFC51A27426F7130FE0C16952DE
+:10F6000030199EDB289D345A9E28E710271212419C
+:10F610007A2DE542B7D4AE45D00F5F6CEDEB117497
+:10F62000C7F5638DEBC3E9B45E1291AE4E8F8EF3D6
+:10F63000A0359CE5D3609CE1EFDF0D7EABEFA9BE6A
+:10F6400067E3D0DDF219C709EA07E96961F40C59EB
+:10F65000927CCFC6C15B8BAEBDFEB792E8B514E815
+:10F660003873381DA53E4A3FA083F2E7AB6027966A
+:10F67000BA197FC9BF5775F0D310D91EBE3E4E3F91
+:10F6800036F27E3C26EB37516443E4CA66A44F2B26
+:10F69000CCBF06F4CB20DF8CE1AF85B28AE393EBDD
+:10F6A000C8265C5F48C4027A64B4F9B02A44916108
+:10F6B0001EBBAFA2DE6DE4FDB3D1E7DAECC4F325E7
+:10F6C000D7F9FA23749EC8EFD93CB52E32F2E5166D
+:10F6D000DEFFFB78BF403DA17D04F5537AC9BF53DF
+:10F6E00037C55B27760BFA737A99CBB7DECAC62F7C
+:10F6F000CAEF92993C85AE7DDE564DC84D3C6F8277
+:10F70000DFA5BE1389E66F53388E7CCF932D7CBC6A
+:10F7100021692CF2B090F3A55C49E70DC6576DA4A2
+:10F72000E30E3EAE35BCDEDB25FD7F023F4C93028F
+:10F730007F075752D58DF2073C0EE5A613FD5BFC03
+:10F74000FD569053526B7C4F9F6FC7EF5677637C8B
+:10F750004A3C3F26E93B65F6BE11BFD38DEF291F1A
+:10F7600036C173CA2F449E0DCF3DD81FCA27C44E41
+:10F77000EF1BF7DFF165A02BFDFE51AC9F9C337CA6
+:10F780006F050591CEAED26C767D0AF88EDBA73B75
+:10F7900056EB4857956CE2F6335BCFE6F3F5CCFEBB
+:10F7A00047B60E0EB854F46B290E3D1CA1D7745702
+:10F7B0004407BFF338D21D027B6CD54AD9A0E75766
+:10F7C0009BD6972FDF695C7FD76CC832DC7FF5FE54
+:10F7D0005CC37D70CB74437D6B77CE31DCDFB9BB0E
+:10F7E000D470BF6E5FA5E1FBF54FD719DE7FFD99A1
+:10F7F0001586FB0DCFDD1637BE29D6BB072DEF6D65
+:10F8000008D071ED805731785189C62F2D0C8F1992
+:10F81000BFA3ECE751E6413982AE08339F2AA6F830
+:10F8200067CF90FC6C36ACB71D216F064005DDAB91
+:10F830006888FF437A775E66140F547AD6D5C75B23
+:10F840007F457F145EAE9CF454C2BCE98AB19CC271
+:10F85000E3B59AAF1FFD30E678ADE25988EBBBB94E
+:10F86000BFEFCA2919A09768DD1E8CD36A635B4F6E
+:10F87000471D1FD584631A1F6FAF1CC6999B785C08
+:10F88000F38BFA65E8DE58C715EDA711F78838F94C
+:10F8900012569494789F417B6C09F40FD6E7228628
+:10F8A00077ECF41F5B6719FDEB78F9C0FD2E2BE0B8
+:10F8B000E34095B19F751C47513954404F94E49BE8
+:10F8C000DE433F674039235EEAE4FCA8293C5E3E04
+:10F8D0008FCCC379E072BB4CC86D35F3731057FC05
+:10F8E00038FAE2CBB4D01C6CDF907FF05A7E6E12F7
+:10F8F0007CB7A489786C149F3C38779BAB0270BEB0
+:10F900006EF5D5D2D2953EEE6FD265C4B3D7E5B3CE
+:10F91000FBFA2AE67F5A1CEC463F60FD9DE16D70C4
+:10F920009DB43EA2603F4C747DCA134E436CC0E947
+:10F930009BC5E99525E8CAE928F4F8A40DC679AC79
+:10F940002F32D26B29A7A799CE4B391D979AE87809
+:10F9500014FEA074999B808E4B381EB5CFE5F6DD62
+:10F96000607A5CBBF129EE1F13FCA398D635A13F4A
+:10F9700086D637CEBF8F811E079CE7E23885AF7BE6
+:10F9800089E4A83CAF614F39F8C933AC86F8C54269
+:10F990003ED6923C16EF28C99011F797B8DF88EB56
+:10F9A00067067A57CF8BF2E7D15E667F34BACFC94C
+:10F9B000304F75790CE7EFE4F411FEBF56EE1735C2
+:10F9C000F7EBC4945036E0A3939742D99B8BC0FFCA
+:10F9D00023219FB4CDBA379BE50BB07EFA797BAF7C
+:10F9E0005C0CA1FD76B277E4F8A2C0F966BE29F1FD
+:10F9F0008531CE5802FE62DA5E6D3F5D83E8D01736
+:10FA000046FE59F61402AE8E28D09F7AF75A05FDAD
+:10FA100065EE0605FCCBB5EEFD95400F3F09EF7096
+:10FA2000825FCD23F92240C70226BFEBE9BF58F918
+:10FA300015FDADE90B2A20EF351EA35DE3E7FC566B
+:10FA4000ED363DCFAB417EF39BF86DBBE0B3EBC928
+:10FA5000F5B17CE6E7F3A25ECCE1F21A9FCF44FC5D
+:10FA6000E2DFB99FF5573C4EF72E8FEBBDB3D58340
+:10FA7000D757B6E6E3F3E35B7D78FFF6D662BCFFCB
+:10FA800039F879E9FD1BDC8FFBFAD600DE9FDDBA81
+:10FA90001AEFBBB89F56F0F12E1E4FA996DBD0BFD0
+:10FAA00058E70BDA5D31FC54C7FB8DAC0F38A4204E
+:10FAB000BEFFD536E58802FC756E484E08EA8BE538
+:10FAC000F5DE030F51BAD8BE4D82802B6D1DFFAA03
+:10FAD0004CA5FC5F57EBB5AE83F642CDCA1CE0C720
+:10FAE000C8BF2AB9F0BC7E96F58E38ED8B7612B57C
+:10FAF0006FD66F2B6A8D76B05FF8D1FB832118E744
+:10FB000084FE6004FAE777AB9E787EE1F689EBDC51
+:10FB1000C04F8D17836EE0A7C689276466AF337F19
+:10FB2000B8CAF95494F7BB8DF17C95F7BB8D3E872D
+:10FB3000FEB6F58F4D0E44B952A559766989C7674F
+:10FB4000F637ED94E2DBAD4956866B9D3CBE4A75B7
+:10FB5000A60272062C0AFD9F40D906E44BD398DF1B
+:10FB600022D917E47AD9B88EA7150702A097B40C4A
+:10FB7000E2AB01F5A6F5B8816FE4E285E7619D256A
+:10FB800005317A1BEC1EB3FD1F7B2FE3D2154A49CA
+:10FB900087ABB91CA3AFC659A86916EBDFA3DCCFAE
+:10FBA00021E8AB71FA96784EFE02F4EAA33EE68FA6
+:10FBB000793483C565078AD7222E2BE176818DECB7
+:10FBC000C1F249A419AF3B38BD078ACF11907B59C8
+:10FBD000A1B83903FA630F87E8F74E937E573423B1
+:10FBE000BD254A933580AF7B1583BD2115333D6F0D
+:10FBF000077B1DEC188E5FA2765E905C05E28F118C
+:10FC00004FEDB41AED3171ED552CC80F2EAB299F75
+:10FC1000EEFF7AFA9DF842E927ECC4219C77EC6B61
+:10FC200004E231229F50947FC5E46F52B3591CC641
+:10FC30005CEF2D5646F705568E8F059EF09BDB71C7
+:10FC400084809E2AB5A71CD2F07A12B5477A678FB6
+:10FC5000E2B7DE86ED9F555CCC9EE0F940D42C9750
+:10FC60000CF6895D77837D38EC7BB7C520A7C3FB95
+:10FC7000CDE8F345F777093548E1BA54E8E1628603
+:10FC8000279779289EA47F2ED3189F9E2997C2DBA1
+:10FC9000914F7583BD555B5C731EF512B547D479E2
+:10FCA0001CA7D3FE3741BDB49ED7278AEF86F489BF
+:10FCB000E5EACCE1F504AA18EE21A17F5914EB3F47
+:10FCC000085076C99F0DF5B2EF69D1F6ABF1FAC1D4
+:10FCD000F556A0F8DEA59A13EE75E949C07B05310B
+:10FCE000F800E89A6733D2D9A4FFAA86E93DA3BEFB
+:10FCF0005D48F9F7086DA756DE540F2EEF9ABD6BDD
+:10FD00000FBF8ADD117688276EBDA7E08F9B01FDAE
+:10FD100019F10AF1B13C8ECA90A71EE99E2191B05B
+:10FD200017FA6FECC7C26C931D96611EC71E9CC765
+:10FD30000E85AE2374BE3AE83CEE41FB38BE3D254D
+:10FD4000ECBC05DE41B4A784BD47B8BDE7A2FF62A5
+:10FD5000F158192F5F7EBF4701FC5B6E37F9998719
+:10FD6000F28F09DA530B88B1BF65DCEE2B33D97DF6
+:10FD700042DE5F14FA52D8B55C1FDE22ECA9B291C4
+:10FD8000E3CB9DA67CBA2ADAF1E66B900302BD8232
+:10FD9000781319A29381BFDABD539B2394AEB7F8B1
+:10FDA0001C2CDE42FBA9087D8E7462387B292F7FD4
+:10FDB0008B4745FEF76B2C7E513F8ADFC25FCCE25A
+:10FDC0000667ED125B0F42E44D12931F5EE961FA84
+:10FDD0005A33F145B627500571204D917C61329C14
+:10FDE0005FABB83D07DF6FA1A4A8CAA336F9EC78D2
+:10FDF000F9E5DDE05A2565B40F4F7913CFAFEEEB8F
+:10FE0000AF84E919EBFC1213CE3EDBFF3EE6750D25
+:10FE1000144818F769F77E8AF68188EF44E977027B
+:10FE2000F351FCC59FA0BD3294B7C5EB5B2AEA2B0A
+:10FE30003E86F19AEFB88E25433CE60CC471E9F793
+:10FE400067947E0DEC9045025F518A46043DBDD11A
+:10FE50007C9308B7ABCEDADF4806BDF912C7F54789
+:10FE6000FD726D3C3FE70299F999C5F54695AD3BAA
+:10FE7000F35486E7C4BD98DF217E924F15313BFCD9
+:10FE80006F0DF36EAE1FCAAF46FF60A460247BB453
+:10FE9000DE44E7292A5FF738DE180DD78A719AE920
+:10FEA000601EA7F93BA7CAFC65775AF5E9EADC684A
+:10FEB0003B62BD33975F96202FA7BCD8E89F5C704C
+:10FEC000D9989773A73558A2527A562AD2CE540F92
+:10FED000EA3594A78E2B1AE29881FE8E9D30ADC72D
+:10FEE00007997FB48CC8611B5B17EA216E27E44633
+:10FEF000F0BFB91FA3B55F36D883F678F9E5FE2ABF
+:10FF0000E0BF5BFCEDA8579750BD3A2E8E5E5D2892
+:10FF1000F7ED1C07F2EB63FB3BCEFEB2BB0AEF35FD
+:10FF200009F361F5B25C651CF0812BBEBF6A3EE748
+:10FF300093E1F13CA1575D0AE006B3BF6D3E97BB6C
+:10FF4000F9267E08AA4338E8A6ABB9A3CF53227E90
+:10FF500018E81FB82F9E1F555C13E55DDD4D4CF46E
+:10FF60006D33FA9FCDF5087F1091DBB2419E85FD80
+:10FF70006B2ED7A4B2B8C7F1C2BB486C5E95D00750
+:10FF80006A71B3067EF1AEE291D70B733E5C39F431
+:10FF90003786AE9576633CF609457F10F8318A9333
+:10FFA0001A98BD5ADC80F6EAD202BE2FA8F02EB411
+:10FFB0004F855DDD78F321CCE712F95AC23E35F763
+:10FFC000BB6BE2F398CF335ABF851D7FCA26B33887
+:10FFD00004B5DB3D68B753DC17E7BB576C8C5E3F5D
+:10FFE00055F4FD20AF3BADBABB01E28C8536DFB3E3
+:10FFF00071E6A1D7C6E4BB2B41BCF55710F8988B2E
+:020000021000EC
+:10000000E3403A98D71B61C78A7D4A13DC4C6EEBFC
+:10001000B81D5B5AD080F298E6A6762BD0CDC7ECFF
+:1000200056D267B453976ADD5930FFE6F54E1EE4A9
+:1000300076ED18EDD65D0EC6474117B1BBE97B875B
+:1000400042A1295DFF1E972B8E013D76A511B407B5
+:10005000CEA4A9E10371FC0D6F737EAB963718F83F
+:10006000AD8CE312B5AA47037FC09941E6C74B3474
+:100070006F0F99707A4E3E29B739E1DA5F0EF4A01E
+:10008000F7BA0DAFFD989FFD70E1BA9C78F51D6839
+:1000900052E2AE4BBFE3F3B65CE46BD7327FE4DDF4
+:1000A000052AFA8527D4BE7702F9B49EF3E9121B1C
+:1000B0008EBBAB50C179E9BAD9DB0C71CDAE423BF6
+:1000C000E6A3B417FEEC9790AF5D562C19F24B04E3
+:1000D000FF9601AE86FAEDCCDF79B79BE9E12E8D74
+:1000E000E3179E37B291CFE999C31F3863F34656A1
+:1000F00008BEAFE77E72137EA26A246E1C47E4211D
+:100100007F5CCFFCC2778BF11E39B413E4AE8EF363
+:100110004DFBA5756E94CF232C3FAFB1B001FD45CB
+:10012000ED13DF52E17EA3FB4315EECDB842CCEBDD
+:10013000DDC53F65F9917C5E37823F9EF2FB4B99AE
+:10014000D3AD1E7ABF3C72B315FC9DC23F3B2C0E53
+:10015000C5E329356CF8A4C6CDF0F589CC6492943A
+:1001600001F492C312D02DE22049907FE6B6861D9D
+:10017000F4BE4EE99902B825D984173F7EE1503686
+:10018000C8F7F119BF55A0DDEB8ADF6B84714C2AEB
+:100190003E84FEFEAC23873AD3693D4BF3894FF78B
+:1001A0000CEF4F355F9FEECE60F94277FBC221D84E
+:1001B0007776E10ADB4F51F1C21B95B0AC0D8FCBC6
+:1001C000E804708888EB286E1E17E1F10972E5AA31
+:1001D000143B6F754AD00EFAB7B1F80D27F4773992
+:1001E000A75BCE61B901F8BBEA85395F013E2137D3
+:1001F000DB5CD7D3062FB87EEE9CAAB1F777B17A35
+:10020000E70769F9BA8243D9EB0A87EB9721F92905
+:10021000F8C3D620EDCF99453FCB06DCF606D5BB1B
+:100220001E6897EB2DB3BD645E57CD7931E67167DB
+:100230002ACB6A6D7361BEBFEFF6C6F019D5036BAA
+:10024000A1FF1B9FB4631E57DA91D75519F41BC544
+:10025000EF3552948F36723EAAD398FE6B2C24E170
+:10026000ED12F0DF87F5A52077AFB27CC30947DE3A
+:1002700063F9A3A6F5A18BAF1BC2EFDC35F17D942A
+:100280009F8F0F73790959A4587F9256DCBF12E6ED
+:10029000C52C27E27E7E7F4FDCF5E15D1BF79B0CD2
+:1002A000B2F71AD5DF10D736BFF7737BAA0CAE3181
+:1002B000F5DC6763B8575CAF210FE1896F53F96FC5
+:1002C000DFDDE1BE03F59486B87DE39143F910B319
+:1002D000C93C7CA88AEB0BB4CB643ECE09C4837ABC
+:1002E0006AA96667F103139F5B8BF747003E8B7526
+:1002F0001A0C722533AA47E4583F441C3B8C84F403
+:1003000037F362F2BEE8FA4E40AF54BA99FFD5CC4B
+:100310002769C554EFE024502E8C89FB9AF9B64E1C
+:100320000BBA219E4DE5E73C8B7FD2F50AFC137298
+:10033000BD0FE793F3A785FE83F52FD967E44F6BD5
+:10034000BE6AC02BE67EFCA3CD88FFC5FA9CE6EE14
+:10035000C1FE2DD59AB3A1FD09EE1EB4B7A87ECF7C
+:1003600086ABE033A1AF87F8AFF0A6C5A0DF81AFC1
+:1003700021447EA6784E12E8C13A37C329C4E44F1F
+:10038000EF728F6C6F749AD6BF332E665FD515935C
+:1003900024572AC83BF33B753D92BE3F39C62FF721
+:1003A0004FD6608B2DC6BFEE2CF8D2629713F40C9B
+:1003B000CBDF2AA1EACB9A1BF5670ABFA988F70908
+:1003C0003FE9307F66413BE6775945DE058FFF0DFB
+:1003D000CBFB4910771457E1CFB46D6F567C3C5E70
+:1003E0008278AC9EFBE106678FE20F65FE078ACF3D
+:1003F0007E6E1B3F3A3E3BC8EDCC5E501EF4BADE2B
+:10040000E6C2AB06F928B4AB5D8EF8B8ED656EB701
+:100410005D8B7C9E94E13BD6CE4726FE12CFA3781F
+:1004200098C9C184E2439DB178B8AC89D286CE9395
+:10043000DA44A690D4C47CB77448EFFDD4C05F43BF
+:10044000F878145C2CF8EB92ACFF19E898A85C1DC6
+:10045000EF47A2F78D85B6D5906F45CB9109A9ECF2
+:100460003A8D5E3B671CCAB6D0E7AF01FE8AE9470A
+:10047000D7F78EE0387EA5B27D365D97D6E5003E93
+:1004800038ABE8A9F6F163E71FB33CD9E7EA9E6D04
+:1004900054FE8E66DB717D3EEA6638E4752819C32A
+:1004A0004F9BD5E075F6B9A8EA7592CE959CE0739E
+:1004B000509A5563DB27767B72CFFD81185CB91BA0
+:1004C0005E4D84381FE39B07D51ECCC7B99DD66E01
+:1004D000A3ED1CD3E4CCB5F47EB69DF1E3B1903529
+:1004E0006EFEF36C3BC3CF9BD5C06CE82769DE84FE
+:1004F00072D620C901907FE21B9B7F6E474BFCBCEC
+:10050000D2CA68FDF3B1FEC3B47EC00D3EEE7F27B4
+:10051000AECCB8FE763EEE0821B5202F8FA619EDA1
+:100520004DBF9DAD7BF3A3F52F8EAD1FF3B3E6E278
+:10053000F32538CFCFB1E7F9762617E5B92CAF4DC3
+:10054000D051D4BB325ADF4AACEF08FB2ECFCEE3FA
+:1005500006BCDF02E79BF39F163AD87C44E3A6046F
+:10056000F56689C6FCF513FAC3C7E0BE9CF07D9919
+:10057000D2DBB87FEFA8D58BF900ED8E694F6FCA3B
+:10058000803C0923AEB7719E51EC3F946371BACEA3
+:10059000714C49760EE2E10E923BA29D237087904A
+:1005A000EB05C27F7AE500EE176BE1DF8B76CB4D72
+:1005B000B82EBA5FB11BF72B4EE8EDC6FD89152E9C
+:1005C0007E5E44DA37D1BEDEE5B897E1F9C99FE235
+:1005D0007EE505D907E5787E4245F45F7903DB3F88
+:1005E000EA62EBD402815F4D76C64B995D32E0C87A
+:1005F00044B8FE84147C26C2FC9A067CEF8F7C6D86
+:10060000C3214A57BD97B81CF4BE24C2E24C151C46
+:10061000D75728E12C581F6AB2993FAAE54FDD59F8
+:10062000B03E1CFF3413D78BEB94FD38DE498A179C
+:10063000F1FC4213FEAFB01FDA0679138B14898CDC
+:1006400023C3FB05FBD5C08E2871B3BCA0126AC5BD
+:10065000819DF1326D1FFC65157FA2F3678987EFDD
+:100660008D38A5562927AC1CC7FBD9CCBF341A9EA0
+:10067000AE30D903625E2B943D556097B4809D41A6
+:100680001FB5283B9474DAAF5D8304229BC4CFBFAF
+:10069000CBC9B630FB60B2650DD08D58997DB0CB1B
+:1006A000F5D776B40FE87BB00F2AB87D5061F7A27A
+:1006B0007D301A8ECFB1333BA1FDE254B49F228E20
+:1006C0001F66817E16F9E402DF0BFECB54CA4F8011
+:1006D0003C2FE07C28F0BE4DE0FD2B9B089C275072
+:1006E000A118F1BE8DF35905C7FB2D10F7027E3D11
+:1006F0009F79CA0BF11881F7AFB898BF9BE37DB122
+:10070000CFB203E43306EF779C1FC0BC8597B39943
+:10071000DE17787FC89EFC8C78BF4CE80F8EE76BA5
+:10072000386E10EFFBB9DE33E37CF3FB6BC5F98465
+:10073000E3F8283E36F26FFBEE1C8CAF94B8EC6801
+:10074000072CE80D0EDE4BAF995736FD662FCA51C8
+:10075000B20F3EB3713B6CD43C5013EEA776C34E40
+:10076000D87F539EC7F28ED2B25D55B09FBDC223D3
+:10077000A1FF69985C98ED806C17DA69954A83C887
+:100780008F1B11EF57682EC4DB8A523326BC6F963D
+:10079000AFDA3CDB887C9DED30E617940BBDA9DC1D
+:1007A0001B42BDA9DC1B01392AB7737F8FE36FDCC5
+:1007B000B1E73AECE2EB81D0D3425E3B1CD39460CC
+:1007C0000CFE1AE26B25578BDD5FDCC1F9F2078A5C
+:1007D00007FDAD1D76661F98F1D850798EF72B383E
+:1007E000DEAFB033BCDF311CEF173B62F09BD3CEE2
+:1007F000F0FE58F30A841D5B63B263DFB71BEDD8CC
+:10080000447CFD215FD7A3F4F4325CAB7811D70AA6
+:100810007A2A1CD7DA004FCEC4751571AD90E3610A
+:1008200074B5E61A706D39C7791DCA9871EDADB10E
+:1008300074315F2B46C1B5BB1C14D76A580E716D5D
+:1008400085C0B5495E03AE251AC3631DDFCBC771F2
+:1008500074A4313C6BC66389F107D76F265C21BE57
+:100860006F4921D9E89F1BC225D3E2E2924438C4E4
+:100870003CAE16C025DA5F029778709C663E3F9AC0
+:10088000A2A39D1FC529BFFDC6212A87BB2E123CEE
+:100890005141E0157FE48FC71A8A102F1087273A3D
+:1008A0004E8157043E11EB638BC2F249057E49E449
+:1008B0001F15D76BC52F2732FF17E21E336E117835
+:1008C000C55C7F8795E199963FBDF59F8A6316EEDB
+:1008D000A7DC47E5A45CD9867AC9AC075BC05B4D51
+:1008E000CBBFEC22E110D4FFA773727A1C7D6CC6DB
+:1008F00033669C32567CB328EF22E61B8E863B3A49
+:100900009430EE936F51EEB3833E32E31A333D736E
+:10091000B24903C40304DE49C4C750EE2E6714076E
+:10092000252A47F538E2A384F5D82F5E2B2E3AEF1F
+:10093000181117313D50E1667A20115ED9E57369CF
+:10094000B179AC627D69CFCEF925EE37EF55F1DC98
+:1009500084F6F353519F26C24B6D26B9EB003DA29E
+:1009600045D7AF8474E91D407917B86A347D21EE0C
+:1009700013E129B1AE9401E81F9F386E392589D95A
+:100980007D0FE6303BDAFC3E9A8762C45524A31003
+:10099000F9F81EBE1F3311CEA22B9893F9AF42D89F
+:1009A000CE2A6E87A2CF701ECF43A05D0DE4913C8E
+:1009B00058270276263767E64A2837CBE0399DD795
+:1009C000F22A16373A5728613CFD4CB90DE7F5D4A9
+:1009D000C72C4FB13D85F95FCFCC72F80ED02E7C7D
+:1009E0000CF5D275F99CA3BB0870C0AC24EE2F485F
+:1009F00067E35C921CD98071F339D32D21EF7079B4
+:100A00007F3089F7235DC3F85B1DC7A3103FCC9AE5
+:100A10003D7C9FC1D3495EAC1FF2E7B368B99D9698
+:100A2000EE8773E8238785C55BCD74FD98D31D08D9
+:100A3000638BA1437D9E5D7750FE77DCC8E256470D
+:100A4000AB6C98A7E380103BADF7A1FC9C9478FCBD
+:100A500021C6657EBE9F8FFBDCE47E5CDFCEF2BCF0
+:100A6000DF8D8A14027AA3A22E82631527ED7F8878
+:100A700016FD4A521AF6EBEC0BAF23DF9E4EE374E1
+:100A8000D025B4D7CE78983C855C5A18F66BD2EF57
+:100A9000ADAB46C807E92EAFC9677134422488AFB1
+:100AA000C11F39C3E9BDA256C671AF70EDBE17E4D0
+:100AB000F15CED1BC9702EE5D2410B01B95BE12A57
+:100AC000B90B9EB7A7303E063A038E5A51F5A56F73
+:100AD000C0F3FA7AE37C9C4CCAC171942A6C3E60E4
+:100AE000FEB2660F6F97AE7E41353386FEFE9FFDE8
+:100AF0008D14B3AE887C167B82FCBE44E39662F50F
+:100B0000AE1CF5474E28DEBF07F6CD048AD879180B
+:100B1000751E1282F86F9D8F44BC9CBF30CFA633E8
+:100B20008FED17E2F29556BCBF2907FC97830A8B1D
+:100B30004B9BD691523A57D9E9E04F67F37366AEB3
+:100B40008C765E6931C3F9A51CE7D7E90D18EFABC8
+:100B50007FA473770EBC97B3ABCB3D3C6E1A433F7B
+:100B60007284F9E79699F83CC5E4FF2FF599F206EF
+:100B700079BEDFD1FC675CC03F0FA673FE992DA143
+:100B80001CBD2E791E01B910745A9224E233C4633D
+:100B90008DE18F217EE0F36BA67B227A9AE964E6F1
+:100BA0000B33BDCFA498E89580FE89E85D5A5CFEC2
+:100BB00017A5EF05ABCD0A7CDB6EFD6D36B78F88D0
+:100BC0001CA34FCC74BBA07952404F9C1B3C87B8F0
+:100BD000EDF464CF57F07C2C2AC778BE279787E8BE
+:100BE0003C507970C6CAF3DB53409E299F59A19EA1
+:100BF0007A5DD21D207F8777DD8BE306397546E568
+:100C0000C84CFF61F247FF57447F7387CB91399FF0
+:100C1000ECB3CADFB7409F53BA2D4CF2E055E8D38E
+:100C20007AE2FA4AECFE5611676FF73606605F7A91
+:100C30005DAF05CF016A197C5E590BFB5D6B255CCE
+:100C4000D634D28DFDD59A58BEC4D4A71E2090CFDD
+:100C5000FEC864E2037DA535B1FC09FA1EF3270442
+:100C60007E17E73AD2F73ACB17319EBF94E233E6CC
+:100C7000FF2CEFAB403BA2939F8724EC0491F74AF3
+:100C80004CFB5E1AE1C9C4E8FE90A64B616647249E
+:100C9000D80723AE667BC17C3DDEF1CFDF003F622B
+:100CA000599E8A7EC4B2C1881DEA7BB8A0A316F300
+:100CB000DC6A2517C4E38E7FDABC03CE415A5EF0AE
+:100CC0007E5C5CD27AE1091F8CA3D5BAC7970EFA75
+:100CD000613B5BB71CD30A26AF1D01F7046BCB6BDE
+:100CE000BD3312E799DC93CCD7F7F6AF1D7810E24D
+:100CF000DE7DAA0FEC97C53CCE5FA7EC59BD96CE22
+:100D000067E722C9B78D3EEFBC61EFA60E88639CF2
+:100D100057D1DFD775E96036D819AF7DCF8EF6E8A9
+:100D2000F14F0F3E8D79267DEA3C18EF50FFAFD78B
+:100D3000D8FB8F5F3C097A6679FEF22268C7A190E2
+:100D40003DC04FD70D36BF0BE725D4F5AA7341FF41
+:100D50002CAFDD6FFF2BA053ED4FEDD783FD31E8B6
+:100D6000A986F9BC2E2958994CF55E5681F73B1996
+:100D7000D08E8FF874A46B3701BA8AFC04610F948B
+:100D800071BE6959E44D2131743D3798930274CE98
+:100D9000A9E5790C8BE400D8CBE75CD7A7A07FB29C
+:100DA00096E52F98E9B51C707A2AF4CF3B795D9CC3
+:100DB000F53BA7F60F5B83E00FBE81D9E7E6F77737
+:100DC000707A3B7EB7EE008CD7F17DBB0BE0B5238C
+:100DD000417EE6D464AEE7DD63F397083C43E96AFD
+:100DE000B7C6F80129DE5F9F1C1377BDD6F6BF9A00
+:100DF000CCF4C02539B819E85FCAFD2565DC5F92DF
+:100E0000A85F25A3F831281F219D96831F6326BB69
+:100E10004EA3D7CEC5DEC9063F06D1DDA067CF41C0
+:100E20007C0EF098B26C3BF4A3EB02F36724E2DF94
+:100E3000E579076FEB88D1775D563D1BECDCCE1B67
+:100E4000DECE82F9FFCFE2DF213EABFD69139CAB22
+:100E5000F550C1F2F1A0FF62F8F869988F6BE56375
+:100E600033FD5A16E5A6102DCACF828F87F3A584CD
+:100E7000F6A8E0EF44F301E5C01E157C9EA8DCB99E
+:100E800045D3E2F27FB49E8B23CAC16ACE57770066
+:100E90005F8D07BDACBB400F2FCC7A17EDD657B88E
+:100EA0003E1EE29394EEDBEEA17A27F4AC1DE3E85C
+:100EB000472FA978FEFAD167D6FF00D68DCEC10A9A
+:100EC000D787B88E97BB56D07EDD00F64301CE4F54
+:100ED000A712E337BC902CE2E6C67CDF9FB87E9376
+:100EE0005ECED659AD9CD27B265F276EF43E93042E
+:100EF000EBF94CBE9F62469B1A775DE61082146444
+:100F0000BC6E01E85F70D8584E1BDA9FDE6C81F82A
+:100F1000E08DCF99DEF37DD5E6FCC87F4F36ED7FBF
+:100F200032ADB7F64B23E769FC0BB77B9FE3F9BF04
+:100F30003FE1E70936F3F3049F877DAEF47A18F6B4
+:100F4000B9D2E72FC23E577A7F84EF7325D9633B2E
+:100F5000375E9CF7A4723A344D0C1BF6698AFDDFAC
+:100F60002D709E12E001B7CACEA17351B405792A43
+:100F70001C2F5A92FD7615F6737D44304FE5AFCFA6
+:100F800077233FECE6EBAC19C788F31ECDFD52A3E7
+:100F90007454C04F7574727075A0804F18F0CDDC1A
+:100FA00009FB1F8AC1D3A91AB32B1BB9DD16BA449A
+:100FB000C2CF4AD1F2A72F91830F313F5B4806DCA5
+:100FC000017F51165EDC4B10C72D2EDA85F617E037
+:100FD00040C06578FE580EF8BD5E443CB77870DEC0
+:100FE0005D0CB7E8C370DC10DD64A413C3E745AF44
+:100FF000A35F71716F7C7E8BE637ADEECC8BD9979A
+:10100000503F18ACE7F8C8157B6E826AE22B733D3F
+:101010006945CC7FBF249FFB7B783C44CCE78E4D59
+:10102000DDE82FEF2AB279C0BF60C689669CAF1693
+:10103000B17D64CACD6C3FEBE24B2C5E880C9319FA
+:101040003D9F4DE579BE2DAEA00FFC98753E13EE89
+:10105000E5E74B95E51BF1BC19EFABBDAA09EF879E
+:10106000D87AB89DCDE7998F09DA51CFEE63FE812A
+:1010700056B787F11F09A3DDB3C06D99F59007E25C
+:10108000566C7F66C920417F4949AF07FD4F0BFA77
+:101090004864EA0C3C87B809CF1932D16F01B87A9D
+:1010A000D3A11E4FE7784AFF050AD909E7CB64DAD6
+:1010B0001B749003D5BD09F7E3407EC338C647F6DD
+:1010C00058FAAA49A77680082CE07E35F1BB1513A3
+:1010D000EC87900F62E66FC4F898CAF94EC4BBCA99
+:1010E00079FDE57D2CDFCDCC0769F68BEFC239CFDA
+:1010F00015831A9E036D9EF7E171B0FE0F1E8338B3
+:10110000CFA524DF7698673B9B67318FAADC26C387
+:10111000FE0EA2B0F912F130B37FB5D4B46FCEDCBD
+:101120002F715EC256CDB48F8CE3F80ADEBB26C7A2
+:1011300021C3B9B5155CCF0CADDBF65C1ED762E7F9
+:101140009CB6F6CD1E31AED5EA62E7FE11D7F2515C
+:10115000F4DE76B68EF0F3054A8B4912E09CD23E5F
+:10116000C2F8EB114B38D91B5B3E6CD857EEEC5BE9
+:10117000B518CF6974B9AAC0CF564A58FC52EF25AA
+:1011800018CFD4C9213918332E112F51B95F4C957E
+:10119000D8B8049DCCFDBB7DD0680F7D2564DC0FE5
+:1011A00071DB03C6FD1BB76ECA32BCAF599F6B78AB
+:1011B0005FED996EB8FF92DB787ED0FF081ACF0FF3
+:1011C0005AB1BAD2507E59C0787ED02DB5C6F383BD
+:1011D000EAF4DB4CF2AB1BF8FBA8D4FD5D18BF258D
+:1011E000F997B923F979CB468B2387D879426807D9
+:1011F000C689B398F7BB7DA409BC609483CE5039EF
+:101200003B6FA7D7B3AFDC03F12A9F82062E3F576F
+:10121000A89AB072D56E166FA9CA886FCF0B3D68B9
+:101220008E4F8873014BFBBA910FCA4CE70096B8FA
+:1012300017C63DE7F33F34D3B91809CEBF18B67EC1
+:101240008F757C3CCE34EAF878BB25A4FB98D39B01
+:10125000787C631DD7507E179C4748E9D10D8F26B7
+:10126000B2F71A95B79D69F978FE4586BD424919CE
+:101270001FF577127DCE98F2D1DAB91F9FE82BC601
+:10128000749E6986DDC3F84267F868A7A487E1FC0D
+:101290003C731C55CD177154E339188E9D442FA013
+:1012A000240A55108CEB8772ECE11D12E493B37D98
+:1012B000A68D375870FD69BCA8EF81FC94A61B145D
+:1012C000DCE7582D6B585ECD66EB931F72EF217FE4
+:1012D000E2357DB5E1FC0EF77617C889FA347B9FBD
+:1012E000683C6D13D5D5F1EC859B52181E3AAB04C2
+:1012F00066A6207FE86E168F08E37968222F3751A3
+:101300003E2E058E2EE44322F0019BBFEF403C258C
+:101310008EFC56A53039F31748612BE497AE246153
+:10132000EB0876659BDB12D79F5198C2F359AE5CF0
+:10133000C573EE5471EE5E163B77AFDD749E65218A
+:101340006FF7788A9DF181F7A021DEEDE7F2B0D842
+:10135000B38EC4E25971FE8FDAFF3EFA99CE8C72D9
+:10136000FE8E886FEDE6FB9A2B2F5902F1FA3F9023
+:10137000A2209D9ED5AC71C7F700EF6FDB141F9EB6
+:10138000B7DAF8B8859D17EF6E9C84FBBE53FE8AD2
+:10139000307F17EBFF622EA77E777807498138F5FB
+:1013A0003B4FC2EF87A8C536F0E591333734E0797B
+:1013B000B1BBFB295EF446C797C2D71BFFBE8EDACE
+:1013C0005CC0432765F4F7D4F4B27CF3A5C5FBF900
+:1013D000392D3DB88FD1FCFB2525B5411DD6E5A59E
+:1013E000F5911D887F7C9E72FC3D13E2DB86BFAFCA
+:1013F000326CBFA586B8AB6D90F17DDB8F7CEDF8CC
+:10140000FB206E811BF5FAEACCE8B96165173B76E3
+:101410004208C67C6E98F9DC216197A9265C29EC0C
+:10142000B13A123EA648C3FDCC89ECB1BD29DC1E01
+:10143000BB81DA6374FE6FB7B13C5BFF16A9188CF1
+:1014400046C7166922E8AFA7F83CBD5916C4F35B3E
+:101450001A13ECBFFBDF5CCEDE2C8BE03EA7366FB1
+:10146000D0ED1BA17C610ADB27A85E61E77EA87630
+:1014700096D73574E5F93082AFE7396D782D75323E
+:101480007B7BC1D5E7B2465A3F4BFC4102E3A1FA50
+:10149000256EBED80BD03EEC178CB0F32BD4A6F73C
+:1014A000ABE2C9B390C3CD6AE067A03F764A9BC266
+:1014B0000ED403633FD772A6FCF9F5CD554D3F918D
+:1014C00042EB7DCDFA0F1E908F1D41E3EF4E89EB6D
+:1014D0006B5AD08EF477772483BD7931297836859D
+:1014E000FBBB617F615BFFF376D4A726BA9BEBB9A8
+:1014F000CFC9E653F5B0F7E417BA67798C9FA4CE4D
+:1015000029F1F5437F07EA9F6DD5FF0DAE0F56C455
+:101510008F43662A15BF06FA556B811EB8B6F51FB4
+:1015200040FF714A92FE1EDC9729FAFBF0FD3F59FD
+:10153000F50F989EAE727D981FDDEF90689E21702A
+:10154000F1617E2CBD3E1F9D33EC814136CF7A5038
+:10155000BBC67976D2EB1A585BE8F73D65F1E3ED4F
+:101560004F717EA27286F982623F8CDF4DF478EB78
+:1015700097284FE75F7562BE7B2800FBBACE4CB25E
+:101580009003317A4E9C63D0D8CFECC281FBA50387
+:10159000CC2E2478FFA3AF790F407C77E5142EC7BB
+:1015A0007C3FC61DF71BF7498B766F4E95C6249F6F
+:1015B0000FF3728DA94C3E1F4FBD46F9CC60F50864
+:1015C000395515765DEB62F57E98CAF82C294D12D7
+:1015D000F9E9F94E26873D29D7363F4FACC8FDFCC7
+:1015E000FC21E441F519F3F51EE1F220F415ED6755
+:1015F00019CC17ED6730E9DAFA9959F205F0B1D84C
+:101600009720274B067F78C0C9F8E90EDEDFB38A42
+:10161000BECCC9E477B97364F95DE564F2BBDA69FD
+:1016200094DF5B9D4C7EBFEC64F27B9BF373C8EF51
+:1016300047203F90E7C8FDF8E49451EF505C7C17D9
+:10164000D4BF5891F83E6FF21B29C6FE58DC1B240C
+:101650003A5B2C9F89C50D14BFEAB8AFE34D637D9B
+:10166000EFF0758BEAB1CD50EF3BBCFD1DFFC6E836
+:1016700007747C3E8E5C0A3ACAB60637EC8B4DB4D2
+:10168000CE059C6C9D2BB7B17D17E4246DBFD03087
+:101690009E6D40B7A1F184A865177F3CA1B8E3E92E
+:1016A00036D617339EDD50AF18CF82ABA74694478E
+:1016B000BF904757448675DBAFC45F17CE38D9BAA1
+:1016C0003990AC3F09F432F397B886397F25DA1F99
+:1016D0007356A90843FF4A14A6078916E99163C601
+:1016E0005792DF20C61DB4C4FAD97AE3EBC9E79C50
+:1016F0004372F71CF2DF3EB69F87F2F58FA19DDBA8
+:10170000C7B956E1FEAF4F98DE7CEB4F5BAC69B4D6
+:101710009DD5197BBF03D75F3B59DE4BC3C51C2743
+:101720004C434F19DB17D938919DA7D62819CF55AF
+:10173000FBB59077AEFFAE41BEDFCA913FBB7C7C6C
+:101740005EBD40E9D3CDF5528F23F7DAF4D2DC2F1A
+:10175000A0FD955308E2E3C6FD2A9EBF25E4E67688
+:10176000985B760E820E79145FA5F7167A3F0846CD
+:1017700037ED47309B10F76C2C1752F19C04BD17C6
+:10178000C651ADE9E7E14AF5D04770A57AE8775C44
+:101790000FF57D1E3D7402C644BF6FA23CD40D7C84
+:1017A000A88479DE2FB747F8584BF28FC5FDBDA945
+:1017B000B6DE035A08F206F3D93ED544ED46C0DE44
+:1017C00080C49504BF6725AEE58FAFB58311B083A4
+:1017D000E23AF0A3BECCED9436685F83F62CF8FBBA
+:1017E0003FAF1119E3F0E6FA1A27F3753F85F3F3DB
+:1017F000C475685FE9578CFEB54A7778F7EC22F834
+:10180000BDB33BD83EAC2B77905585804F8204CE3C
+:10181000E154E915F23745BFBDA953193EE5FD5422
+:1018200089A42C2C88EA91CA7E12595084F806F3B8
+:1018300066A11E0FAF275808EB7D9A02F1BED712A2
+:10184000FC4ED3E372303F35C6DF584E8C7885CEE0
+:10185000FF0DA9E371FE6F4C65EBD074B8D2F92F80
+:1018600080EFFA9C4CFF3D2E0766C2F360060B41E9
+:10187000D3F2BE54C62FB352E77E7E3ED941D8EF95
+:10188000F202FFC6C6AB9FE5FAE1E8F8A00EED5400
+:10189000FD6859E724FAC986E6063CFF78C175FD64
+:1018A0009F9C85FCDB2C15E3818D8F18D7911F72CF
+:1018B000FCF3D2B5EB19C41154FF2D81767710A635
+:1018C000FF426EF6FBA30D13731E65F0911A9899F3
+:1018D000D1736DAB5CCBF0DCAEAF3FE79D0DE76045
+:1018E000A95C3F2F74B7AB6B615E21DF348E3E0F76
+:1018F0000EF58F6A6FC33A15FFFC97CD1C2752393E
+:101900006E4865F2BB16E6E785F1FA1DA97F41FC3A
+:101910002FF4505061FA86DA4D21B09B565DDE748B
+:101920001C96A9D5646F35C437285FFE2DF4F3CB20
+:10193000F643C7D94F12862641BB941FFF8E8F678F
+:101940000BE7C76F717EFCF6E719D7D753191F272E
+:10195000C29F02870BFC4DF5FC23A94CCF7B9C5FFB
+:10196000CCBAF10FA90C77079DD7B86EDCFA05B495
+:101970004FF1C641685F4F2523E2DBE7F8F87F9C13
+:101980003A846F7F0CDF2DB5EB3F81EB10DE2838FA
+:10199000F91BC8938BE28D7699E30D25D69FEDA7B1
+:1019A000F88BE7D5DD6999179513B53F3E0EA94F22
+:1019B0001DC2214751AFEC6638A47EA8DFBEDE30E1
+:1019C000C8E1242EEFEF307DDCA0F6DC09FA594D9A
+:1019D00067F3A8A4337CF92A9FD7F7A494B8FECD67
+:1019E000AE687B5DC85F5B587B72F22CF67B204251
+:1019F000AF58256C47F887EBD3D977A29D45FC2AD1
+:101A000070AAB99D5FA40ED95FBFC071DD2FF60724
+:101A1000EBEF40BBFE285D23B17405FD62991743CF
+:101A20004F8EEB12E1B818FAFD078EA789B5334443
+:101A3000BF607C3D7BAB4B167CF2BBD411F8A39FFF
+:101A4000F3C7C5287F5CE4FC31908AF884CDC3EDF0
+:101A5000E38CFBCEFF90CAE8B39BD349CC97B9FF88
+:101A60000FF2F743F4F09C7C2616D7FAF3D356AD69
+:101A700006BF6593ECB3D0FBFF032FADAD0C008028
+:101A8000000000001F8B080000000000000BE57D37
+:101A90000B6014D5B9F0999DD9D94DB29B4C924D9C
+:101AA000B281246C20D858032E21C42841264F022D
+:101AB000448C88888ABA014C42802422B6B6D5CBA1
+:101AC0006242785A637D142DB60B420B16DB88A94F
+:101AD000A518700382F80EB68AD6DB1AC4F25084B9
+:101AE00005B55D5A5AEFF9BE73263BB3D905D4B696
+:101AF000B7F7FFE3ED3D9C33E7F9BDBFEF7C334B18
+:101B00000891482A215790FEBF1C13AD17F38A7C19
+:101B1000D42779F208991420AACF46C817F0373E87
+:101B200054C629022129842C946BE29431744079A3
+:101B30008BAB6604213DA57DF36B22F4BF2789F5AD
+:101B4000BF21635D798A8BF6F7D27658DF49FF2D86
+:101B5000127263438FE8D18DBBE1A3C373D408F342
+:101B60007C37C944085DAF75A67B9FAB804EE334DC
+:101B7000B9379281FD1E4C94B1DF84A13E2981F6D4
+:101B80007BFD1451D6D37E374E13541F3D57253F4E
+:101B90005702DF578E2261FF32A8C338B96F4EA4B7
+:101BA000735CC69F57B988DA49E7A95288BA3542AB
+:101BB000BFB17C9F136223CF73139F672261F384AD
+:101BC0003FBF95EF6B4269E4F157F2F967389FAE7A
+:101BD0004822B09F7566805FBE592D56E8B81551F2
+:101BE000F0902A95AA80AF180A3A733E21B7D0B177
+:101BF000263AC1AD80735A3E2C7A2AE1B98782C356
+:101C0000990F94E01D0478ADB0A913605E7BAC5AC7
+:101C100005E538499D08E54FCCEA242809F113521F
+:101C200048C8144E3F53AC36BF184FFF51643EDED8
+:101C300067656D5F0C85FF3F53397C092102F10B0D
+:101C40005F5C02759F08F35FE1DAF78E40FB5FA1EE
+:101C50008D3B2A858DCB500EC7F1BA88FB42F86CBC
+:101C600037FFD065330D3CA7566EB779AC0087536C
+:101C7000B19E5AD867AB73BDCD45E1FDB2A7D3EA9B
+:101C8000A6ED1F271084E3E93875369CBB753B69C8
+:101C9000E8A4ED629CD0D2A9835F8362C2F5E62AF4
+:101CA0000C6F6F48EA5C986F8A556D84725A16C53E
+:101CB000139DF7D6E4BE457AB8DFC1F1343F898D74
+:101CC000BF4566FDC2F739973F2F96046F1CECC9DC
+:101CD000B6EF4331027F4E827F51FE293EAA4C9FD0
+:101CE000E1A0385B2EBA4DB42EE70A11F9D41BE2FD
+:101CF000532FF2A98BF2A99DD2871C993E82BC7FFB
+:101D00004514BA1CC3F7590ECF238C1FC1E9B6DCAA
+:101D1000D123123ABE98F35B78BFBA2491F1B19BFC
+:101D200054459AE787A17DFF10F7ADB07DE79B6B27
+:101D30001E85FA4C657F45226D2EB9CF319D380046
+:101D40001E2662C946385941AE491C4E749B04EAAE
+:101D50000BADAC2EC5CE2709B4CC72FA568D04F863
+:101D6000B599DD2E5AFFE0E80722A174B6F1A1D3A0
+:101D700002A1F2627B8090E46C98478619E1CFF46F
+:101D80008530703EFACC2569EB51D05C7994A81669
+:101D90004ABF571605A69278C378F2059DCF16E87C
+:101DA000F50A803F2BF1C65D8A64FCBB9C549C15F0
+:101DB000E74BA3EBC279E4CF880FCEA33A3DD564BD
+:101DC00024218981BE1F3563BBCD3D01CF456CC049
+:101DD0006FA1732E44FED3F625DBFA9EB89FF6EF73
+:101DE000FE3CD67D2F9C3B50798CED8778EDC0D79B
+:101DF00062B51BE43B2116DC9F89FE077C362E482A
+:101E0000F79BCBF70B8B14E8F64F069EE761B1E624
+:101E100015C0C7AD56A2C6E7A37C7815F86198999E
+:101E200076A0706C57049F97F66B7F68CEF26C902B
+:101E3000D7AB25F77002744EB60994CEC7D275EFB2
+:101E4000A272472E223685D665273B7FFB7D8E7595
+:101E500071023C97C84CFA7C6CC07F46A0708877B2
+:101E6000D6552BF41C321F2F50C0C178C1A59099B4
+:101E7000F940B7BD2241F9E0447868FCA37E8308AD
+:101E800087ADA86A08D057B944BC56DA5F70B279FA
+:101E9000AF2401910C033C504540CB52E2C6F27E88
+:101EA000D1730CCE6395295EE9FEAD26AB6F890038
+:101EB000F8AB79B50AE15EAE1CCE0DC9B368720805
+:101EC00020775883ABF8F5E55EC5A2C87CF58F1086
+:101ED000DFFC03F98630BD3C6D28933B7BEC7D3302
+:101EE000F57CBF5C61F26939976B44627CB65056F1
+:101EF000CD89E7E0F3D55C1E8E4862F2B39544E6E7
+:101F0000E36712D9BCD3EEF5B50FA2F09B9224B8CB
+:101F1000410F576CA99506BB42FD06717D989CAA9E
+:101F20003A60DDD6EDEEA33E07681F19F57BFBBBDB
+:101F30006406CC5FCBE5E7DFF8BC6712D93E86F0DC
+:101F4000FA41C13E23125CB213FBE1929D08E7F413
+:101F500030B88871A3027EBA0E19CCD7310BB84EB7
+:101F6000CF50261F872719D719CAE51F95FB1727BA
+:101F7000A2DCF76540BF97CD6C7FE1EBBA43EBBACB
+:101F800071DDF96CDD4920E781FF5DFB5E10757640
+:101F9000D7A4808780DD033C6C2A0CC97BD9E51768
+:101FA0005B687B7114393F8E9F9FAE330EF6455AA6
+:101FB000181EFDA9EA9550A776C17858BF67A88278
+:101FC000F2F2F54126B29EF2656DFAD0EF83D8D4D5
+:101FD000E6F95522A3879EEC76E72C8A2F3940DC60
+:101FE00016A4F306947BC55CBEB46EF71078EE1DA4
+:101FF0004465A66EBC1C986525363CCA3FBED0FA27
+:10200000533E6A0F0C4DF044C08B56AE5ACC44116F
+:10201000712DC0710BF9B8F07EB68777C5C1FC2B66
+:10202000A1FF370899CAF1430F8CFB9BC479A735F0
+:10203000B03EAE8FF6DB9E3BDBB01F7C4EF9A83D79
+:10204000F78938B097BA33A91E0039F5928872B271
+:10205000DDCEF0D89E5E47F4F66899D32F1E8679C0
+:10206000CECE26D329FE8A9D1E72913DB4EFE2DCCE
+:102070003AAFE0C0F66763E83CDF4EBC08F12EE7FC
+:102080007948A50DE0D249EAE8F965C52FBA695942
+:102090001620FEF105D09FCA7981CDE7B2EBE7218A
+:1020A0009D308FECA6F400E3027EDCCFF6A3E7863A
+:1020B000A32DCF6490DF1A5F52BBEE5EC07FB97272
+:1020C0004D79229DBF714B76BE48E7AF74F6C8B319
+:1020D000F2506EB7029DFC2A456D4BFC5FB4E7667B
+:1020E000109F19F03E218BE981294D826F3D854F6C
+:1020F0007B989DF018E7C7B12179B716F9AB48B3C3
+:1021000013D4C713CF6D07AF83E7E7B0837F06CF44
+:1021100023D8C19B12991DBC19D6A376F09389CC04
+:102120000EFE39AEFF15E1768D42343BB40BE673FB
+:102130002472B9FA7B668F86EFFF1E7EFEE5F4AC53
+:10214000BD4097924F6274CEF8F40ACEA7938E5298
+:102150007EC91B48FFDD94FEBD94FE4E53BB49CCA7
+:102160008E4E4FFE0BE4CB928719DFB73A7721DF13
+:102170003DCFF9B39BAFDF9D2B56033E5F26A222D6
+:102180000A03E76BCFF43841AE87F39F7AD648CF86
+:10219000654EDFEA7CE09B7DB3DDB0AD707E946977
+:1021A000593722B4EFC3C0876374F2890852E5053A
+:1021B000F021CCE319017646A204FCD74AD8BADE56
+:1021C0007D22EA89687C44E9E624E0AF1F2E006C9A
+:1021D000DDFE29DD04804E289F9DFA3AF4B28AD3B1
+:1021E00007F543FE0AF3E4F27A6D14FF4248EAD79A
+:1021F0000F4212F0F74CA687B2135D4847B5C421D1
+:10220000837E51C5CC2C902F745E7312EDFF66C295
+:10221000B9E7B525F5F39F0DFA93BBD8BCAF809114
+:102220003D66E0BC1392A8FD11619E0CBEBF1BA3CE
+:10223000F80B399A7D92D76F9FA4C37A39C037744F
+:10224000FD1D29EA60A86B7C53CCED961705A35EB3
+:10225000BEA4DFDF677A2E8DDB2F644EFFBC390012
+:102260001F0D9E9A1D50CBE583364F2EE7BF614967
+:102270000A1BDFC0C63BA04EDB2BB9FF44E172292D
+:10228000C2DBCA9E9FCF2F7A4061718B3ABE2F2945
+:1022900051D1F41BC2B52A9ADFA584F43FAEE7669C
+:1022A000FD4770F8D07615DBABD93EC62A0CEFE1BE
+:1022B000F18368F8D1E0EFE4E723B96C7EE2ED87C3
+:1022C000DB64985FA39768707B3381C16D9206B71A
+:1022D000363E4F983C5825755A9508E7BC91D3ABCC
+:1022E000568FCB35CA8768F1943121F8D4221C0A65
+:1022F000D8BEA3C5572EE7FDAF4CEA875F038EB368
+:10230000B1FD3EC0E5356D9F87ED196CBE3B42EDDA
+:102310004DD8EE64FDA3F9FD7770FD3537A97FDC5C
+:102320009D38CEC1C685C713B4B299EF6F7E68DC05
+:10233000DD382E878D7386F0BE18DBAB58FBD78D4A
+:10234000BF39F9BADF0DC16515F2BDCACEFFB7843A
+:10235000FEF6EF637B315B379AFCF85B029B6F05FF
+:102360009FEF4AF08BE91C8941922B39C06B8A752B
+:102370004FA05DD282AA1FF447E967B20BE47485CF
+:1023800068F30A541E4B2E2BFAC9311251C1AFED1E
+:10239000F9FC5BCEBE3CACFB41AF2F8B29B182DF99
+:1023A000B93C5B72833E2C794062FEF57113CAFB27
+:1023B0004A713ECEB34BD1ECDCDB0D7EB44B715594
+:1023C000C7C03EAC227131FFBFFA2AFA7C3C97D7D6
+:1023D000BBACC926986F6C268B178C77D5A1BF4EE6
+:1023E000CE323F5AA5FF31F9ADA25E96F93829A346
+:1023F0008508581AFD6D99AC3E258E44BD8076D473
+:10240000D880D1FF965D9547607E99E8C6D175BBAF
+:1024100093EC0EB4A772C8F02F28FF58720562A182
+:10242000FE4585E4F1031E26BAEA94527A1E4B86D5
+:10243000C70A7238C7EC1F0CF184B60CD9ED05360B
+:102440007CA8DC9A0DFE5607F5CF110E6AD2352313
+:102450004278B214AB04E890E204F9ABBFB4B132F5
+:102460002599D1F1F1240BE2B382D7B5E7E1782FBA
+:102470004C8E65728458BD1FE6829C104802A5C32D
+:1024800005A42F0BE8312D9DE98F26535F2AD44FE9
+:102490009240AA8396AD1D525524FFE727DC2F5B9F
+:1024A000618A6C2FFDC43CF17D80830471834B31C4
+:1024B0002EE0B10C0BC50F347B558B2344B35BEF7F
+:1024C000176B8EC13C82E23F03FD07DABF5E76EEFA
+:1024D0000C26A7B552DB472D87CBE0642B9E6FE718
+:1024E000DD6564960BF1F439C7D3BECB002AD973EE
+:1024F00014C0D34BD98FE4405CCA9AFD9003F8B363
+:102500008A30FBB4C205B29890476D9EB3493AFB3E
+:1025100066624E2DDA4DC5592D684F2D8BE2977EA0
+:1025200047C38F4627368F39790CC4BF165A61BC12
+:10253000A4D4C442B93338154B6AF75AE0F9B20C47
+:10254000563F1F1EDEE37229DAFE27805E80784D3B
+:1025500046FF3952607EFADC2BE787CEA1DB5F7A3B
+:1025600072CAC0FD5993993ED2F625E570BACC35B2
+:10257000D25D4D32933397246BFEE205D3DDDB173A
+:102580004277E1E79D98BDA8EA6212DABF765EED78
+:10259000FCF4BCA3E13C15123BFF46C5A3C21414D6
+:1025A000CE05008701E7B246D6FBAE64D397E5A31C
+:1025B0004792865DF879BEC4BCD393BF049CF68C69
+:1025C000539D204FDA52287D523CB509ACD4FADB3A
+:1025D000397D3EC3CB2F2327867F89F39538851716
+:1025E000401F8EF71C2C8365CA8B4781DA017EACB5
+:1025F000073C94E63D20CDA2F5F6BB67A3FCDC3397
+:10260000AE05F7BDCC6EDCAF56A6707C1467A9C8CA
+:102610007F6D9CFF2A08F323B57ECFF37385F347C4
+:10262000F87CE17CFDA84DBD0BF69592CCF61FF22F
+:10263000FF7A45BDFF57CAF5D738EB1D86F8C73876
+:10264000EEFF2DFB6CA8CD4B0F7A9AEAB57F8AFF7F
+:1026500077863E013F29A3D4AAF7FFDAAC65D8BE3E
+:102660002C53ADBAD401FA5874DF4B107EE80F7AC0
+:102670000551D918C11F5C9629FBC7D3E71685FC05
+:1026800014F65746F525C45F2C8A4A2E1A31D02FEE
+:10269000DC652D23103739AD9067C11F3BDF7936DC
+:1026A000271BFD4209FC423E3FFA854A0BE9C378ED
+:1026B0004F1901BB06DA5D2340EEA8C463073D4213
+:1026C000FD429D7C3A6DBD03F93D7C3D2AB79E06D7
+:1026D0007CB5298C8FC3FD413999D9C19A9C0DA72E
+:1026E000870A27A39B18BA7533931BDB9323C8FB78
+:1026F0002F2F9FE694830B703D59B2075CB5EB8298
+:1027000001095C9E6F27337EAAB13DDD06CFB5F986
+:10271000C3F1434FAE423C1DEC1916BFA1F61AB5EA
+:10272000A3CCD45E5B2984D65FC6E11D0D1FCB40D0
+:102730005F47E0A303C9262E7FC2E3447718EF5F0B
+:10274000142F7114B2B83E89007F91DB49CB29BFA9
+:10275000C0FDCD32B3DBA9009D6616BFE3017F3E0D
+:1027600053C6FB0822B538AFB10F3CE772889F45CE
+:10277000D8DF9F939310AED60C93C13E23E41E8303
+:10278000FD18EDDC84EFCBCCCF25003C73F5F00CCD
+:102790003B77B982E706B31EE68D37B9899FF245CC
+:1027A0007C1671A3C08A37611C56E37385F3B92682
+:1027B0000F6C0A1B77B56318B3CF445B40A4E75F87
+:1027C000E5A0F6349DA755DD857A551B9FC0CF6FD8
+:1027D0001BC7E28D36BB5F5122C0E17ECEE7D1CE72
+:1027E000D9A14A89E5747FF72BCCFE96C6996A7CFD
+:1027F000188F62F15A85C34E2C29B082DD3E091C28
+:10280000F814D8CF56451FB712F97EE2EC743FE7B3
+:1028100090932BC2F61393DB570EFB97B2552551BD
+:10282000B7FF0A876607F4227F479BEF3E2EE763D8
+:1028300072DCA40EEC0D9BDB0FF75A316A5D218828
+:10284000C5D85C3799AD6B8F550B475B7474D891C5
+:102850002947BC8FF82F0793FF7649AD81717645E4
+:1028600022704F66E7F672B479A3EDE37CEBDDC42A
+:10287000CF3B603D5764BB62A883C90D69DCD61AA3
+:1028800090D36484448647D013290EC6A7F1729F63
+:102890000BFC754A8F9E48F3890E99C3FB5FC41FDA
+:1028A0009ADD5DD2B56F28DD6FAB4D720B20BF8A0C
+:1028B0008EF6BA74F0A17A7D9643173F106D1E9480
+:1028C0006FA28BDDBB575998BFBD679CF19EAC8151
+:1028D000C3EF7D5E46930BE31D9A3DF6AF39E79754
+:1028E000C55F05E04E07970E800B01FEFA415B6B5A
+:1028F000047949E1D3FE55E0B39AC3E5694ED7D1D7
+:10290000E033CA61FA97D241387CCEC7D7213EF373
+:10291000914311E0D86A97D3671BF8BF03ED904845
+:10292000FDEA74E78DC6871A7DDCC4F14205A42157
+:102930002E203BBCBDCCAFBCD3A8E7C4F96E2E9F04
+:10294000C9590AB744DE3FD146FC71F1A1F9E572DD
+:10295000633CE179078F0BC4901880CF69F754016D
+:10296000F2142CA699A394A1B04487007A2215E60C
+:102970001949C8035C7E86EBC11495F9C983498B5C
+:10298000C0F44A06EECFC1F711AE07D3A95F03F139
+:10299000183822F8D38369DD0A360851F11E5CF03D
+:1029A0009AD05F76129F00F367903E2C87402A02F0
+:1029B0009D3F9BF40A39147F0F54D48D02F9FD0E0C
+:1029C0009CE392D039CE678F6AA5667FACFE37C193
+:1029D000FB93B07DFE1F82F792321DBCE51423DD10
+:1029E0007C597837707887C7F38A219E970DF13C20
+:1029F000FF6EE053F92CB33F7AFE2E637CAF2D9B24
+:102A0000C5F32AC4EA35780FEA92D1FD9072FB56DD
+:102A1000419E936677A2CE1B168AFB594FFD4082DA
+:102A2000380A918E229CF06EC885F22C3B05E53168
+:102A3000B323C6F3FDCBD973AC70EF1DF29FFC221C
+:102A4000B33798BD24733A287696A2FFD276F6DC87
+:102A500076C785FA493BA53D787FADF947AD8159E9
+:102A6000E82F858FF34BFEF7E0FCFE80EC827C9331
+:102A70006E7E2FD67D6AAF214E1BEE076976D57824
+:102A8000BEFFB28067DFA570BFA5CC222CBEC9E017
+:102A900020F375DA9CA7F11EFCF9B326F4B74E7348
+:102AA0007FAB18FC2C3BF377EAEC03CF794DCA459A
+:102AB0008638BCE63FC138C8AB2B53FC22D8739A8A
+:102AC000FF04ED2EFB40FFA9CA127805F637E51585
+:102AD00011F342A2C137DC6F0AD73F335398FEF996
+:102AE000560A8F1784C1538BF785DF4BB76BFC27D2
+:102AF00079053DFF87AF2FEF9A88FB278A2E1E3B73
+:102B000034144F14542FB92B3F143F8C10376C01E1
+:102B10003AD4E2869A1ED3E8D842FB5AF19E397223
+:102B20003CB13B7BEF30E617BE900CFC59A1B0B82E
+:102B300091B63FEA17DE93A2C3477180E96DCB7F60
+:102B4000B5F42DA1F02549C4CDFC83169795D62B5D
+:102B50001592BC12F9CC86795AC50E01F94EF2C70E
+:102B600060BDF2B8DB1743EB965D2F89A203D69BBD
+:102B700045628410FD68791D6D810F5601FE4E1F60
+:102B800097DCE7F2BB2B218866F0936243F844F9A7
+:102B90009664A83F22791E4D413B6150689C08F91C
+:102BA00060430DF967CF48EA63D06FBA55FD11F65F
+:102BB000FFCFC3FB2F53305EBCF72BE13DB40ED3E8
+:102BC0000760B39174DD7A36DA7839ACE342FAEF14
+:102BD0008F4B2F22781FB309700671964F880FE232
+:102BE0002CCF995F14411FB5F379AE201D2E7918B3
+:102BF000DB2FF4DBBCD1B90EE8E2AD946C9CEF396D
+:102C00009B67F528DABE6F83340AE236ADAE67AC57
+:102C1000903FBB6B637B469F8EFFF66DF60C89E49D
+:102C20001F6A25FD4B3015E1B9E259A98A2627B65E
+:102C30008B501F609F6DE852609DCD1BAD3322C548
+:102C400035E454C6EF576C60766D55AEC90DE2ADF4
+:102C50009878A524B88F7113B79F36C48DD8DA5BE6
+:102C60000ABA285BC47B0D5ADF1D4FEB716354F425
+:102C70000F2E1EB115C75FFC49A99BE5517A6DF96E
+:102C8000B4BE2AB774CC4A5A1F12EB39067C45F5FC
+:102C90004C8784FAB4330EF200E2464C4D59496B2E
+:102CA0007102A98964E7FE3D85D9799BCD1A5C251F
+:102CB000CC83DCB55146FEDA972EE2FD1385DB7C32
+:102CC000A8FF393D8E504A24E5AAB71CE058413A86
+:102CD0005BC19F2A775DF3423CF90AF02BD8AA002A
+:102CE000FFAF8A6287BFC5F7874284D2CFDE0D6D02
+:102CF00037920879D4FD79D671AA2515EE57F8BD1B
+:102D00002E714E45FA898EEF7B99BFD9E96F8DA55B
+:102D100070BC624BC720FDFCEF42D0356520BE2160
+:102D2000FF995C0AF9B71ECCA76D3D6A42F8BD9CBD
+:102D300027F8040A9FBDB922B5D9E8AE72ACBEE14E
+:102D4000B4BE9AD371F596FD6D8380E5531DB8EE40
+:102D5000CBB94F58597EEB85C7AF47533E6884FBCC
+:102D6000648A8F094AACCF45F1350FA6A0F5718A68
+:102D7000D5E7A7EBF5D87BCB12E812CFA508EEF587
+:102D8000402FB94401F9812E8889214AA175101973
+:102D9000484F0E82F95CAB0AF3D6435C6C6586AB98
+:102DA00013F20D778CB062BE59783EF10EA1E58525
+:102DB00044884B250A28AFF7E6BE89F7747B332C8D
+:102DC00004E815137EE9F3B624C6A7710546FBB3E4
+:102DD0002A359BFB9FC46B290CED2B2EC7AAC6502E
+:102DE000427A31918DDF9723F880DEF6B9B87CA066
+:102DF000E7DD080691D4214D1F111DAF2F0D9FE077
+:102E0000D2EC62413BA769E0399E137CCB87C23983
+:102E10002EA6E7A0757BAE80EBDB9595B7132C8BC8
+:102E2000EAE11E337CFFF7A632FF50A664970BF24F
+:102E3000AD73F9447D7E8C5C74FB145B3CE631A180
+:102E40005D99962BE079261E65F7B903F2B315E27A
+:102E5000910DF8A156476A68BEB8CF9EFD36E4FFD3
+:102E60004E2E12FC31B01F9EDF4CFFAF07F48B9C3F
+:102E700053CBF2AF73D7E179261599DD709733C93B
+:102E8000E6EB28A5F5978E4918CF9E9C3301F3AB4E
+:102E9000C3D75FA9107F1585EF4B7912C23BE6A21D
+:102EA00027709ED7F34C286F26433E36E42FEBF372
+:102EB000AA511F1AF3B9278BFFAD9640B39BF12B94
+:102EC00091BC8340BE4F711AE1673F6ABC2FAE2EA2
+:102ED000B018EA93F3E4303DEC457A793193D1C5EB
+:102EE0008B170BBEF5D9213A9B7434C90774067F42
+:102EF00062A1018E8673C6056415E0B7EFE29F3DBF
+:102F000008F72471AE65B7E33D3887BF4627711CCB
+:102F1000EFF68C5F7F1BF49406FF703AB870FC5F8D
+:102F2000535302F82FD0EEEFC3F01F866F8C416A27
+:102F3000E7183610EFB87EF6407C6B7430E0DCF7B3
+:102F4000752D1F4AF1FAB29D3E003CAF937DF70A02
+:102F5000213C9D17AF392548372B950E1BC8FD988E
+:102F60008B0ED9C03FD0E88288DD057A7BFF9F8534
+:102F7000EFD2D5027326DD820FE27A6FC0A3CB4376
+:102F8000EBBC98DA9FD7F5622AD855352C8FA3551C
+:102F9000CD67EF5D15307D1A2E1FFE902AE2B81E18
+:102FA000F38B19E7CA53ADB67908DC8FB542BE1D65
+:102FB0003D9FBCBA16DE6820F2B45A949764B5C03F
+:102FC000F2108A7F8BF27D8ED3B75488B01E5A32AE
+:102FD000B84F17937BC5C9D89FCCD0F2926ADEC791
+:102FE000FD4F63F50BDDD76BFFA47DFD9ED20A8BF1
+:102FF0007731BBF96A1E97D7ECEE2936967738A55C
+:1030000058447CBCBE41F0617E24EDE7A574D2C873
+:10301000C9F66A6E079E2E7AA67D940BEC41D560A8
+:10302000770AC53D68F7251419FDC14435D680FFE0
+:10303000E4AA24433DA56690A17FDA8CA1C6B8829C
+:10304000E79B86E7831BF20DF5CC962B0CFD87DC06
+:10305000556AA8677B2719FA0F5B3ED5501FDE71B2
+:10306000A3A1FF37D6CC323CBFD8D768787EC9A69B
+:103070008586FA88CEEF1AFA5FBAED5EC3F351FE89
+:103080009586E7A3F7FDC0501FD3FB98A1FF65EF1E
+:10309000AC373CBFBCEF49C3F3B147B71AEAE30210
+:1030A000DB0DFDC7077719EA25E41543FF32EB6F07
+:1030B0000DF50AE53D43FF09CE4386E7135D1F1B6F
+:1030C0009E6B743039F75343FB55EEBF85BDA75354
+:1030D000C3E21C100F18068F3AB08C259DEC5E875A
+:1030E000F462F960A1A73C0DE8F3C7DE7648486AB0
+:1030F000F506FE0857D3AF170D4B60F6934AF4F26E
+:1031000053CB4FA57E8B378692427C90D2ED684A96
+:103110007741014B2548256B32C47B62B04C0A26AF
+:10312000637B7230114B477030B6A704D3B14C0D9E
+:103130000EC3322D988DA533780996E9C18BB11C49
+:10314000141C8DE30607476199111C8BED99C1CBC7
+:10315000B1CC0A9661FB90600996AEE0642CB38313
+:1031600013B11C1ABC16FB0D0B5E83654EF0266C6A
+:103170001F1EBC01CB8B82B3B1FC46B016CBDCE08A
+:103180003C2C2F0ECEC5F29BC13B70DC25C1DBB1C0
+:10319000CC0B7E0FDB4704BF83E5C8602B969706F8
+:1031A0009760E90EAEC27EA3822BB0CC0F3E88EDB5
+:1031B000A3830F605910FC11B68F093E8A6561F038
+:1031C000092C2F0BAEC3B228F8732C2F0F6EC6F24A
+:1031D0008AE033386E6CF0692C8B83CF61FBB8E0EA
+:1031E0006FB0BC32B81BDBC7077BB05483AF607BCA
+:1031F00049F0252C4B83BFC5F6B2E07E2CCB83EF84
+:10320000617B45F05D2C2B8387B09C103C88655515
+:10321000F0632C27068F613929F8298E9B1C3C8589
+:103220006575F06FD87E55F00C96FDF22E6ABEB231
+:10323000C784FE2CF753A3FB0B5E949766FE5E1CBF
+:10324000E45663FE7F8BE0C378A1A3EF05A89B8BB8
+:103250002C182FBC9904F03D813F903E3BC8D39E73
+:10326000CB8F6440BCE9F5147FA63EDFC1CCE30000
+:1032700015E27109FCD5298E5D29A04F6FA6CD906E
+:103280006744D42F300F720ACF83BC59A20E16DDCB
+:10329000EA7E98E172ECE7B7D0FACC6AA2E6D3FEF8
+:1032A000ED975B30AEDF9E4FFD205ADE97CDF26585
+:1032B000BBD298BE7C2A8DF9A5CFA531FFEAC942C1
+:1032C00096C733F3F6E18C9FCA93CFE33731387C4E
+:1032D0006324CFB3B505B2303FF602C79D48E57908
+:1032E000B5BCFF836935CFA7D1766F29C96DB1858C
+:1032F000FAD1F65D51DAF7803C086FDF6562F8F0CD
+:10330000BE2D723FA12661EA39FC84D717F77EF300
+:1033100085E1A1FA1B51FC504296B0FBC35DC7AAE0
+:10332000AFA7FAF0EA22D14D2507F9EFC5DBC67D3C
+:10333000389CAD0BF999DE5211E317338BF7EF4947
+:10334000A6F5998B1231EFBE7F5FA5667C3EC5F96D
+:10335000F6375FA047BFB9E537E33E34C4453D6863
+:1033600077DDC16994A8E6BFF669CF915E59DCF7B5
+:103370000E58DC05F2CF8CF3F6AA66DFB9F263884B
+:103380006A21AA81EE19BC56C1FEC1F7275613ACBB
+:103390001BCFFB50B8A2DEF7C6CBBE56019C7757B9
+:1033A00002D05D5C5E809C2BBE0CF0943051A1CFAE
+:1033B00006764C3478A63819FD2514AB4E2FC54F30
+:1033C000DBDF45BCE7DA9D58A800FD7FDF9693065A
+:1033D000FCE174327A6DEB7917E35B090501E2B524
+:1033E000B1FB739705E2F8562C972E7663D9B6B8E1
+:1033F00008CB95193FB042BC444C91201398C4644B
+:10340000CEC17890B6BE397196B5C44DE75B63A95D
+:103410008610920871066A2224D2FA12EA539C4D51
+:103420006374FDBAF3431BF0C3D93417D64513BBFD
+:10343000378E2BF0AB909710E7564A2557A81DFF03
+:103440001CD8BE1EFC91D749DFEA6B018E2A7B1F78
+:10345000A395BF6FDA5A329CC3551B1786F7303CD1
+:103460008BB21BEFADC558DA3F2F3A5EF39C2C2F81
+:1034700001E84BA2F4F529DF3751E34C309F86DF9A
+:10348000D35200F3A95A85C87997851ADC155539A6
+:10349000D73D0A51A4BFEAE5A92D6F5B183DDB506B
+:1034A000BE621DF2B9B8BCDA9BA6163BE9FC8BAE36
+:1034B000E472202309E5006D9F7E056DDF66627E64
+:1034C0008A3749467EA14048803C5F6275254C3D65
+:1034D000471EC4B2C58A2A99E17EC09500F05AC63B
+:1034E000F3F5E00D65BD1CF857F50BC90B1F9E2BBE
+:1034F000BCFF3613E7ABD8183C97C8E1A18D9BEF12
+:10350000E4F238BBA6D689F1115706C8555A9FED8B
+:103510001C83E7CF00BEA2F5DBB0AEF4D7EBB1BFA2
+:1035200093F5C7449A0B90C3745C138E93FAE769C2
+:10353000C1BAAD7FDD85B88EA3BFBE08EB19ACFF65
+:1035400085AEA395FDE77F93C9C9CF24352189C2F4
+:10355000A7E6AED935E5546F5F7BD75C2C3F58DCCE
+:10356000AB825C3D4CE5491B856B4DC93007F83992
+:10357000D75E35CCE6D2D16B3D8F6BEE5A6EAE0284
+:103580007D57BA42ACD980FCB4C49037B7CA69E65B
+:10359000FE0DDB471DE5F1BB29C9D5AFD9FFCD36FF
+:1035A0009D3D3A8BB865A0F7D9CBCD21BA263AFE1E
+:1035B0005458DB3693E7FB37C039568AFCBE82F39A
+:1035C0006B22E1FEBC2BB5E61C7A872CB7104F04AA
+:1035D000793C103E84FC95F2C167B61C8CCB524BF3
+:1035E000CD1A695E0D4ED1D6AB8F12FFD5E0A4C1C6
+:1035F0005B6B3FB47AB4C2EC6A9F018EB3EF1B835E
+:10360000F1CA7A1EAF278956CE9FAC5F1D5D672B2E
+:103610008C935417D03BD423C9176DDD3AFAAFBB56
+:10362000F323C197C361A599E9F130F81E5E333CDD
+:103630001EF45038FE2E14CECD1682EF530436DA27
+:10364000591CC93103E76FE0EB13C74CDC4F035F34
+:10365000EF859D717E13ED5FBAD1BE1EFCE093A590
+:10366000DE476A403EAD37633EDBBD3B57BDFD23C1
+:1036700078EF639D19EF4CE6C63D5C08F7B1A7B83B
+:103680009EA30AA007BE9FE021DA9F2AC0FCF58412
+:10369000CD7F52BBFFD89880F03C5ABEA17D2C2D27
+:1036A000FB762CA886B8CB919D57ED05BF796E2C83
+:1036B00091D231BEAFC8C87F5EF38746FB400AD5C2
+:1036C000C581F57AA8EBE247737DE60FF5743E6F8E
+:1036D00093B1AE8797490F2F57B9115EAE0A03BC5D
+:1036E00084E7ED7E5107AFF298E10ED0EBEF3A5D43
+:1036F000088F8698A5A9009F861D2BB09CB729C668
+:10370000FBA16EDD059D89867AF3B674AF5EAF9C32
+:10371000DEF7443CD0E142A7E8FD90EAB9E38BD55F
+:1037200056B0634E2CAEC252C3FF82CE6CAFCD30CA
+:103730008FB17EBA43A862F2D99530ED1CFCBAD0A5
+:1037400029E33A1F6D62FEE6478BAD5E58E7F862EB
+:10375000C5CBD6757A991DC5E035FFAE38EF87A386
+:1037600043FB8B36EF3F7B7FD4C22787AC04DFD986
+:10377000F9E21C7A3BAA5C923E93517F749BFF0C4A
+:103780007463A5FFFB02E3A812D6B5799B3B452FD6
+:10379000E41313B2C5B01E1DE73AACE3B7E87AC133
+:1037A000F89D8971100B43F9CCEE413C700F42E754
+:1037B0003B29D996431C41BB0769868568DF05D63E
+:1037C0003ED9439B3EE91A76CEF7CC299EB2412FD3
+:1037D00037583B6450B60D9D1797033F7DD2D59A5D
+:1037E0000AF2639E78FA5B91DEF7BA3E9DDFCFFB6B
+:1037F000CC01A3BFE8D3F6992D19F88CD8FACF4D98
+:10380000EBC7A3BCDF53CBE76DDAB2BF722CDD7F11
+:10381000D3B65332EC232DDD539B9E123ABFC0EF3B
+:10382000811A371D94E17C47CDDE8BBE772EFB7E5F
+:10383000C03E6D4E43DEA197F4027FCE2A221AC30A
+:103840005EFF1E9537C75E3113B83F2467692FFAB4
+:103850003C8B3F9D436AE2015EB3BAE6A1FC39F6B8
+:10386000ECE4BD2CFFA8A310E8E31362C2F7DC3F31
+:10387000216FC68FD6C16F75BA963FC9BE6FA3E5DB
+:10388000B7D00DA6637E7A437B2FBC376621929713
+:10389000CB25817DAFC627A03C6B60ED5E625D826B
+:1038A000E758CEE49197FE07F5DB3A8CF2A97E8DBE
+:1038B000B15E47A6A6427E77DD4366C8202273F537
+:1038C000F28FC2EF8E7466D7D7939676B0E71E97C5
+:1038D000595EF72C854883A91E5AF0EBC70B6B691C
+:1038E000FDC17476BFF311F733E0BDC774FABCF1C4
+:1038F0002E9FACE60D3CDFA1AED1D3C7129C8FE961
+:10390000AD46CD6E252E88E30F867F0D8D7EFEC1E0
+:103910005D22DE3B0D86769D7C9EBDDC78BEF39DF0
+:103920003FFCBC84FC00CFDBB8E91AF4DBB4F368DD
+:10393000F8D2CE63DE14F93DDF27D30583DDB49DD5
+:10394000C34FF3BB9F0FABBF10567F299DD9F72103
+:103950003F9DD1B799F337A5FBE781EE1758039543
+:103960008C4EFA64FD7DA81CEAF7C2B9FA5938BF3B
+:10397000D07E2FA58F89DE2F2634DFEB91E65BF01A
+:10398000EBA79E057FB4F1970FC7C365D031A9237C
+:1039900015DEB398BF71693CC0E9A8E48D07BA3958
+:1039A000E613AB22C14B1AC4E506516D02C57B93E9
+:1039B00046FFC54BA6807EFFF346B3027E61F32629
+:1039C0008B1FBEBFD4D43517EF6B68FD20AB2FC360
+:1039D000F72A9BB7993FD0E3B5F1670FA7627E073F
+:1039E000F10E66F7E9FEC1F0E9A0A60D7FAA043F3B
+:1039F000B99904909EC3C7C1FAC12494D7B572C2C5
+:103A0000C0E75ADCB4993591E6AE55A7206EDADCF2
+:103A100035F108F07D33913ED0D35303D034F557C0
+:103A20003E4FE779779791CB40BE68F020BE149463
+:103A3000CFAD9B7F38F220DDCFF10DAFC40B7A7F85
+:103A400095DFB79FEE9CFD7EF239F4C3094AA7FAD1
+:103A5000F73134B9EBDA46379046ABDDAC9C6FF604
+:103A6000C78FA5709DBFCE8CEF87CE7FEA899F3E22
+:103A7000067944EF5AF0FE63DE537BDEBE82D6E762
+:103A80003D6D7654B363D8E03E58C34B33FD1FDC25
+:103A90004F6878687C668F0CEFCF403BF8071A3E82
+:103AA000E63DDD23931103E157D6D923F7D922E070
+:103AB000A5F36025BE67B4F92F32E0FDD84E81A48E
+:103AC000650F1CDFB06E0FDA310027C423C7533FE8
+:103AD000DE06E0CB3F657B01F653406E9F0F5F072C
+:103AE00040AFA6205DFF623BDD47C3EF2D6E8043F4
+:103AF000C32FEE8887F31C915A187D3FBE3415F210
+:103B0000DC1ACCDE54054BD6DEF0E33B91EEEAF74F
+:103B1000DF99CAF20ED5749EDF910EE7BC6DED758C
+:103B200078CE3AE241FA6B785CAC813C98CF255272
+:103B3000F57404FEB89BF3C791F514B9F49C4740A3
+:103B40005E3A42FE8EF65EF39DFD7110760FF939F6
+:103B5000BF879C3A48CB5B67F2B79F6E372C43B95F
+:103B6000FA51A69A06F793140E9A1C45F92AEEAF5D
+:103B700048637862F218C751FA2B8376E8DF6BC688
+:103B80007B61DD382E3FD9FA8BF8FA74DFB1608F94
+:103B90001C498DFC3ED0A67EFEA7FA5647673A3EEA
+:103BA000677CBF6105E3738DEF7DD754C1F3CF7E92
+:103BB000C7F808C6813EA2FBF2A7E1F39E6902CADC
+:103BC000050BF147E2EF0D66CEDFC6E7D462477B17
+:103BD0004EA313BA7F09BE4716A217BA4E12E201CE
+:103BE000ED95BA87E8789D9DDD0CEB623F39D49E58
+:103BF0001DE2E37A2E0FBE3DC8280FC8DA940B8A67
+:103C00000BCC37FB7EFA18F02FE557AF0BF8D78CAB
+:103C1000EFDD7CBC65F7DB37523AFFB853E35BA3BB
+:103C20003C0DE7DB86AD77627C309C6F3FCE682130
+:103C300011F93683BF3717CEB7197DFF5679AAC160
+:103C4000EF2761F0A3F2F127DB5DD1E1182E1FC74A
+:103C50000E72213CC3E523FDFB1D291C48871AFD7C
+:103C60006974D7F8F30543400EF5D3A7467FFDF4FA
+:103C7000A9D15FF8798DF01B20DF20D949673F98E3
+:103C8000EF255E3BC577608788DF4B3AE90AC4437E
+:103C9000FC67690CB915ECF0930AAF27B27A20459E
+:103CA0006E0739A1B5076258BCF2644D203E5167DA
+:103CB0005F1FEC16E321BEDBE78BFC7D37CC48A40D
+:103CC000EBF745F9FE9B168F38191B3F12D78BCDAA
+:103CD000F201BE2A445BD65D9037DA21E2777CE6BA
+:103CE0002CB93E1EF2434E760FBB7A066DBFED2512
+:103CF000FE193FAF2AA55338CFE6783F4ABC8F1450
+:103D0000D3F3CDEE66F6F39CD591E944BB37AFB360
+:103D10002D92411E51BB35441F049EB3EF2C34AC91
+:103D20000D6BEF9E8CF4D418464F1EEE1F1D1BC466
+:103D3000F3FB479151DC3F31E9F3412AC4BCABE1CD
+:103D4000BB9C27F789986F7DBA5B24ED70CE2D82DE
+:103D50008F007F7B53902E9BA8FCD0C77F8F03DD05
+:103D60009DE33DBAE3BFFA43E1F76897F9CFBE3769
+:103D7000F247B43CFEECBB173D07F55F1FC87A8FD6
+:103D80000CEC5FB6F3CC2D20FF4FEEB4108CABECF7
+:103D90007C31EB7B50DF6EC1BCA393F75A54B4A7C0
+:103DA00077DA318FEE64268BA7B6EEF8CB48CCDB02
+:103DB000266D8837C760E6779CEEFEDB1FF1FDDAE3
+:103DC0006E7A2AD0B73BE3D01E6FDE1EE30327F5E1
+:103DD000E48EBF14EAEF2FBEEE799A6416BF3F69F6
+:103DE000273320EE753291C5AD9B9FBBFC892574AE
+:103DF000FD055D3D32BCB753F6FCDF4782BC39B9E7
+:103E000095D91127CC7D3F266E42860CBEE73E3306
+:103E1000C5D709B0ED28AF3C3778E755DEBC487010
+:103E200061703849E100E7A270690039190D1E85FB
+:103E3000FFB1F038750BAC3FBFFB32BC7F08C1450A
+:103E40005059BBDD6715F0FCAC7DE75F46823CFE58
+:103E5000B87309EAF7F39DFBBAFFE7CE2DF82FE41C
+:103E6000DC8BFE63CFCDE8FFAFA09FC60CE483815F
+:103E700074FEEB6F61FD177637EEF702F9FF21381C
+:103E80007FCA7FE2F9BF22DEB70A98BF723EBC3F0D
+:103E9000F31F7BEEF3E1FD258E77BB0279122777C6
+:103EA000FC3D8BE8CE7FBE73BFF97F94DE353BA827
+:103EB000D7D4A214D0FDBD4B3AAECBA6E51BEAA7E2
+:103EC0000E705B2D51EE694C19CCAFB0082CEF9BF6
+:103ED0005C2768F1A55E43DE534603DA1B53D4FB2F
+:103EE000D8F799A4965EC83BED2D9DED5E893DF215
+:103EF000F17B02BDD3C6F1BAD1DF7A5D20AA40EDD5
+:103F0000DB29A593F781BD77B52AA23D484BB403C1
+:103F1000DFCAAA64ED45463FE38630FFE0FA19C6E2
+:103F2000E7D7F1F9A693854A0185D7F40C49F151F9
+:103F300010DD50D26286F3DC70B3403A74F1CDEB01
+:103F4000C2E6FB2304D07476E497855F413FFC16FC
+:103F5000223C4889766F771EF81106EFDE69A35878
+:103F60007EB1E466F09BBEC08D7153EE879AF978FE
+:103F7000B36D792FF0AD9918FD4FCD8F8C0667C2C8
+:103F8000FD529C676808EE665544BF54371FC24314
+:103F9000C3C797C58386BFAF8B0F398318EE75B53E
+:103FA00072AEB5761EDC435821DF9DCE7BF56AF6F6
+:103FB000FE88354F4038D61499F1FDAD3F996A0A15
+:103FC000C170AE1E7D59D377D9B46E80CF5C0EC759
+:103FD0003AD282762739FBC517C58578FB8776EB01
+:103FE0005C9590ABA85F52572CF863E9F9EB25E29A
+:103FF0004DC88738A8403ED0C7417DC63AFC5D9980
+:104000001A9AE77CFDA3C9877F76F93E95471F5032
+:10401000A41F8412F366D8EF5D68FEE3ADDD0C8E5D
+:10402000CDF305DF50A423BF597FFFBB3983C5679C
+:10403000DFBF7B34CAB992FB472430BFB600F379A7
+:104040009AB9BD7FDAEB4A8078CEE9EE610910AF0C
+:1040500039BDAF2C3E521ECF7EEE57FE76B115CB4A
+:1040600093E542879880EF9D4C413D5C1E4340EEB6
+:10407000848F5B91A1C5655AD8BD246179F875FC20
+:104080001CF5746842920E6FABAF3A268D1C880700
+:10409000F8FB4077AFF275E10B7E2CC0757F4C5F6B
+:1040A00065A4EF13FE88CB85EA5D6764881F4CED3D
+:1040B000CEC6EF4B4E2D37BE07F86006F7CF4793BD
+:1040C000D1B0AFEA5D13E32F07BCEC13DD3114BEB2
+:1040D000CDDDA7644F84FBB97078C2FC10473E6405
+:1040E00076D7013C0FDD1783EFFFBFC6EF8BF2F8E9
+:1040F0007721E1D341103FDBC0E17A2683C5D1AF00
+:10410000AD2E31A7D075F3BA945190573688F73F4A
+:1041100093E1C2E783F938ADDFA0F9ACDF4159691B
+:104120008A74FE21598C7EEA89FB5B45C27F1EDEC4
+:104130004AEEB7FBE1BDB8D3E5027F6F269CAE091E
+:10414000F2C7E92AC107FA17FC58AC570BA8FF5F62
+:10415000D3F2EEA6327DA9D17D389CF767980C7911
+:104160000EA738DCDFE6F4A1C159836FF87EB5FEF7
+:10417000545E8DD7C75BAEDE36EA17609F34750B91
+:104180008A894ED524F5C9C087CDDB1E30C3FDC258
+:104190000DFCF759885433527FBF7B2683FDCECB6D
+:1041A000EEFCB1683F7EBA9AD9C7EA9C53F160072A
+:1041B000BD6672BF3116F8F175D1F05DF3F0F2BD56
+:1041C000C54A63B9593F6F36EEF3DAF92566080F31
+:1041D000DD34BFC79CA6A3A73319EC7B415AFBA0D3
+:1041E000F92ECC5FA4EBE13EBCDFB710C8C7C8EB2B
+:1041F000EC2D8DA3CF6F6A496474D8D0D923639D09
+:104200007D67585B4F5B279C9FA655C719EAB3CBC8
+:10421000FA32002ED516FF2277043A7D2853BB8749
+:10422000FA927A42A5743BF2FF073D71AA32D27727
+:1042300050676732FAD5E987B448FA61E112571A34
+:10424000C07FE18E6169C01C0B5FAA488DA41FDE90
+:104250005ACCEE0F0FF0BCCB93D3A87EB854A71F57
+:10426000A6C5207D848FBB2AF302F58386AF7FB37A
+:104270009C790BF44304BEF6641AF5C3F4EE5AD4E9
+:104280000FD3A789C4A58BC75D9F793EFD50927A55
+:1042900003D6CDEEB80874F316F74B00AE50C23A11
+:1042A000A027EECF64723F5C5F4493E7395902BFA9
+:1042B000DF3E8F3CFF5F82B326CF175EC7DEE31F72
+:1042C000488704E5F5C21B04FCFD92853B983C5FE2
+:1042D00078338F4B86C9D71A90AF057AF9CAC6379B
+:1042E00079983E68DE96FDC399F4F98D1D66B79501
+:1042F000F6BF31246F0BF5F2F6FE4C49837396122C
+:1043000001BF3366C61197515EE5809C3A34EAC519
+:10431000BC6780EE5F63EF99FD89EBF15747BD58AD
+:1043200000F1F4C37CDE67B9FC3AB1983496533897
+:1043300094CD61F6F0822D22C2A1A98BD9794D9B33
+:10434000047C9FB732FF0CDE1BCEDBC1EE0DE17BA0
+:10435000BE253A3CCE7BADAF7D303C5F27E0BD67EC
+:104360009D7B1E7BEF6F0D8B135BE97F902FB1223E
+:10437000367E3DC13C1D15E3CD0B38DCAA2D81BD39
+:1043800030BEFA67827B1DCA35637C7A41CEA46356
+:10439000E01FCCDB14D6EE5E81F7190B20EEACF3F8
+:1043A00047DEE2E7BB4DF4E73D0379816F88117F7B
+:1043B000EFECAD7038347C4D38ECA77028F8EA701B
+:1043C00068EE7E00F36FBEEEF90F64F2787B3E2953
+:1043D000007EF9934945FEF7BE2CE27BC5731E189B
+:1043E0009EA6CF53FA1387C36B264F7B3AF46B62BA
+:1043F000EF1FD7AF7D7A0FBC1A3EB3938C82B07D8E
+:10440000FD1AA39EECD7CB5D2ED4BB335B9E16E08A
+:104410007BFEB789047F076C76BEC503F7AFFB63ED
+:104420000228CF343A4CC892D877DCB8BD776850B0
+:10443000A01CFD8A6D82827C02DFD3803AC5037C9A
+:104440004F63F7E57FA9E470C7F84CF33686A7669B
+:104450008A17E0B34A6AEF821EB989EA1DBC2FEBC6
+:10446000EE3143FF06DA2F19E58E1BFD5D4D3FC18E
+:10447000FD5D49AA0E6F3B0E32FADD28B84904BC37
+:10448000E5D2FFCE85B768F8D2EC870BC59B068FC7
+:10449000842C23FEF6C7F4568FC67B2AF63B40A435
+:1044A0003B11EF553EEC188678CCE472369CBEC1C9
+:1044B000DE77E9E24BD7C0C6F1C3F531982787EB29
+:1044C0000E65F6905EBE84FBD1CDA417ED9AB47450
+:1044D000CF5319BABCB0E93C7FA5FF5E37D4AF3EDD
+:1044E000734CF47EC4598AF73F5A7E2DFC7214E651
+:1044F00083F1FAEECCC20333E9793F5D2EE2FBC9CA
+:10450000D79B5C6F17031FAF3413A0CB4F5F35AB46
+:10451000CC0E8D43395CFBDA213384466A21BF809F
+:10452000F6ABBD87C9DB4330196DFB3DD5632A7CF3
+:10453000B784748E81BCFD69EE9E0AC8DBBEAE6096
+:10454000FF52B8A7BBB64C79FB6D80EF0A91007C97
+:104550003F585E86FECA1DB70B48D7EF2CC6DFC298
+:1045600022D74DCB7EFB6DBAEECDCB53F09E6DA620
+:10457000BAA702E86DF6D5761BDCD34DCE15894778
+:1045800007C79B49EF5290DF335B6EBF0EF6DB40EF
+:10459000F502C45D1BBAF757A4417DAD80BFA3D619
+:1045A000ECF5C8F00A54EF9A5332C43FEA683F4032
+:1045B0004FF35AD6AF798380EFF7D451F900E7ABC8
+:1045C000DB20107891A497DA7F5636AF0F3ECCD41B
+:1045D000BB968EA7F57A180FF36E48C4DFBB6B7ECF
+:1045E00095BD1F5457B4642FC8A73A3A8E3E26BDD6
+:1045F0001B6EC7F9E6AE1508A4063714657FBF0821
+:10460000E67BD58CDF0539D0F3A80CFBBE85AE97D1
+:104610004EE79F2DF655609EF5F70405F3A0ABBF5E
+:104620008B783BC9F980647C87F199C0EBDC2ED490
+:10463000F4E3C6ACA12CCFFAAE25ED70AE3E6F4AC6
+:1046400036B844CDDB4EC960E77DB8183E3C43F137
+:10465000C6F3E0767B0FC97D3A39B52B6B188E9F78
+:10466000B3AD04F9FC365283F7E29E254C2F1F5C54
+:104670001AE313C01E312BA837772FFDC62370FE17
+:10468000134F99F1BEF444661FC6678FAC35E377CC
+:10469000435AD78A28478E6C617121F1F1EB2AD3F6
+:1046A000017E540E00DDED5E5B26833C3CE2137020
+:1046B0007CD9E377A6B2B8AF517ED4B91A515E3C2B
+:1046C0001EC3E443FD9AC8F7AB51E5C5A24A26DFF5
+:1046D000C3E4C1828C768CFB85CB89666263F65D10
+:1046E0003EC9877AAF3F1DE9B7E9553301FBAE49B3
+:1046F000526E5903743333066E92295FF8F7807C4B
+:10470000FBD427B8BCF4F94DB7FE660CC0EF30C03F
+:104710001BF8627532DEAFD6F96A11AE5A3E62FD01
+:104720001A233D6B794F3778C4D07B3EF47F373501
+:10473000C41155D7EFC03D942EE97AB76E137CF0C3
+:10474000FDA303F71CDC7B6701D615A0C3A6BBB88D
+:104750005E5D6D47BA3DF09D534B812E6FB95BC0D6
+:10476000FD13AFA71DF44AD31AC10571CDFABBD909
+:10477000F87A3A1EE8E5C0A38C7E281DBB80CE9B4C
+:10478000D63EB017FB6F105C30FF8175B5A8871B54
+:10479000BC22C1E71B0EA2BD4CF501E60DEDF68A69
+:1047A000A940E74D6D1605F0AAD18B467F07F9F7B2
+:1047B000A789D53DF25AF87D8A2C5744BA1367640D
+:1047C000237D356F3123BD347B193D1D7C4A443A2E
+:1047D000DCBDF4FA4AA09F131B8528F447E9AB20FF
+:1047E000445FE2E3661C5FBF99C51776AF65747DD1
+:1047F000A48BD9A7658F0F47BFA6FE353361F1079C
+:1048000062D3DB1FE7A3C370BA1BA097381D46A372
+:104810003B8FB9733AE41FD4FE82EEDF15825759FD
+:10482000FB77300E50D67E039E57E31F78AF05F21C
+:1048300036E6742C61F98C12CBEFF9D2FB0ADBC798
+:104840008321FD980FFA11F24FFC741F2F6E79022D
+:10485000ED804F9E3C88F98DF39EA3F8A7FD4F6C29
+:10486000B1133FDAD93E94338D5D22E69712C95FCA
+:1048700078ADEEFD2D2D2F63DE2FED08F7C6AD16BA
+:104880005F351DDFF8ECA191784F7E2FB353BD4FFC
+:10489000B2EFCC106FDFC86B213F5362F921E1FA10
+:1048A000D73684C5718EFF260EBFC7246CEAC17B44
+:1048B000A6C6CEEBCD165DDC521C6266BF03F19B33
+:1048C00038F69E19C53FDC2FC2FEF4BF27A1E5854F
+:1048D0001CDFCCF8A7719B19EDA3C64DEB30DED7DA
+:1048E000BCE914E6CF96FDF2A9788043F336D1985F
+:1048F0003FB549F45B30CF4B3C6861DFE530E431D4
+:104900003575B1F73B9A3A799E5058FECCBC5FEEB4
+:1049100078D64B4133EF999FC5033F7DD4BB311E01
+:10492000E049E7C3FCA3AB8BA2E4279D2F2FA9731B
+:1049300005CF4BBA0A7FA7233C2FE923F807D5E31D
+:10494000F94338DEB5BCAE4D4C6E51EC17467A0FCC
+:1049500049B35FE63DF5F98F218FF6F8D68F7F0CCE
+:10496000FB9FFF8F4F7F0C791D64678C02F644F329
+:10497000936F61FEA136AE7A08B3A74E6CFE19E6BE
+:104980006F9E78D78276E1891D47B2C05E38F1F418
+:104990009954C8CB5CB4A302E3138B7E5586EF8792
+:1049A00046F337813E7D17903F1A8E8FDD5DA2DF83
+:1049B00046F7F9C93B16E4FFFE3CB3CE052C7FCF8A
+:1049C000C5F3CBB644CED3D5F2A19ABAAEBD7A1C0C
+:1049D000C8BB2EA6D7FBF3A3CE9757F63B8AD74B7F
+:1049E0002F007F5B78FE60E75511F3CA3E817F5050
+:1049F0003C350E31E6957DDE75DB4F1E83675D919C
+:104A0000DFD3D6F8FA7C70D3F2802F1BA2DE3904F4
+:104A1000F868EBCF318F0FF056ED02FDFF7916C429
+:104A2000378F9A0318370CECB02890EFD5B8E30015
+:104A3000F2CB895FEDC73C5BC2F3714F90FE3F96AE
+:104A400037C96317CD1BEC2C1F8DC31FF2D55CF14A
+:104A5000D8CEF3D2181D6BF96AD1F2D47E3E84D938
+:104A6000415A7EF20257AFACD842F802FC084580AA
+:104A7000AF8386FC3FEDDCE1F3290087CBF4F997A7
+:104A8000D1F201B99D3E005F4C2E9F58C7F331FB18
+:104A9000F32CA949970FF9414C1F36FB840391F081
+:104AA000ABE55FFE340CBFDAF9A2F185C69FE7DF04
+:104AB000F75783CB9A212CFF5F83CFF1B391E57435
+:104AC0000FE777EAB7F887E8FC965BB9DFA2E59DC8
+:104AD00069FB6DEF647AF9F826663786F3775394AD
+:104AE000DFD37A6308F3EF9AB6F58C0439747CD778
+:104AF0006F38DD31BA6EDA7250F672B9EDD3CBEDA4
+:104B000028BF5FF62EDF37F57723CED7BCE554C438
+:104B1000F93E92D4EB61FF1FF5323BE4A34E31E244
+:104B2000EF20ECE67AA9FFDC7619FD2E313E16E582
+:104B3000D1227BD13BF05DB7457619F31D5A97F032
+:104B4000FC887BDCF83B1EADF649F8FB0F4B013EC1
+:104B50003A3FD4AC78F07727CCCE9A02F0AFC2DFE0
+:104B6000EB941D26E2D3E35FF2E2FBBD5386FE45E4
+:104B700002BDD3BBD8F8DE48AFA4EC49A6F3F59646
+:104B80000B6EB07707D29971FE6B54D1103F8358EA
+:104B9000359CEBB49B7D0FCD6EF22BB40BB1C7F4FB
+:104BA0003AD1D173B1DFABFE1F05EC5EF50080009A
+:104BB000000000001F8B080000000000000BB57D06
+:104BC0000B7C54C5B9F89C3D67379B6437D990047A
+:104BD000121EE1ECE64D4258C2534539092426F233
+:104BE00070414554D4253CC23389F8B8D4D2B24080
+:104BF0008C88B40D824A7BD12E34A87F4B5B40BC9D
+:104C0000050DFE170816ADB551D16AFFDA06880802
+:104C10001A6005CBCDF542B9F37D33933DE764438C
+:104C2000D0DB7FFCB5C39C7366E69BEF3DDF7C3336
+:104C30009B48E89F8790752BED598A959004E295E3
+:104C4000884C88D3AB04DAF208FE5DA1FF4B24B494
+:104C50006EE775371647B34613E2608FE87BD701DE
+:104C60008B44485C1EC9534612E222715E99D637C6
+:104C700026686F4A0984AC77FA27D3CEC915F81B8A
+:104C8000DFBD245EA51DC6B3D3FFAE507812C7D2D8
+:104C9000BA3D327E9266AC27135D1DE1D108E90B67
+:104CA000CFE99F4A48B94C21A3702495598231120B
+:104CB000BE9F9CDD37026F522AF186E0FD148737D4
+:104CC00040BF7738187C025E0ACF718047A5FF216C
+:104CD0003C856D010B41B88EEBE1A07F92CF89F04E
+:104CE0001D37C1775C0FDF30D59972B2805614A2A0
+:104CF0005CA1F875D85B09C7F3793D9E0909106579
+:104D000034E053E095BEA7FDB8A54DCA1509F0EAF9
+:104D10009248268E676A37D075329ED769BF7BE18D
+:104D20001FD711D27F89DA62A3F3F4D92517A0A186
+:104D30001F85B51590A0B4DA0019CF3A443D64231D
+:104D400085F4BB3DEFD9DA68B974E77BF8DE02750C
+:104D50005A26C7AB13070C27E4FEE0305F5A3E7CAF
+:104D6000373BCDE2C57AAB924A48C3347F9A653867
+:104D7000803FACB16520212F92BA21127D6FAF2FF9
+:104D8000683D7223F015FDEB0FEF0B5AB54278CF5B
+:104D9000EB8484089DC78B715D75CD9E46EB9EAEFE
+:104DA0007A00EA4D80FCEB61BC82D67ADAFEB0EA8A
+:104DB000BB5B1D45C8B4E72C444A21647CA723286B
+:104DC000011FB4F521241D9AD5C5015DBAF119C59D
+:104DD0002F498D7CD7233FF2EF289C153BE9FCA798
+:104DE000F967FB268E20648CC4F04A5C6D23A63BD9
+:104DF000018EAA256A6AA4DDB4E7CECB1E0ADF12B3
+:104E0000CA53D03EB1C2754B1E852F710BC5960A91
+:104E1000DFFB1F00B8B357F82DC01EE349DB831238
+:104E2000A527F93405E111E334EC97917F1B1EB3FC
+:104E3000045723FFAA926FA89E7E6D26FA8519FD5E
+:104E4000F61E43FAD5341F63F4DBBBF500D0BFA6D2
+:104E50005972C5A8301FEF2ECA44E4F1E0049F3216
+:104E600088D23526DC0074B59212DFE47CC4EB6393
+:104E7000309F6E78E5F0F586D7174F6D7BB2887E50
+:104E80001AE8B078B349045FE2BB1DAA0DBF2BF24C
+:104E9000F89F023CD46E6A6B88A570BD76EAFD046B
+:104EA0003F8537BBE37CA888C29B3D0EC5B86BDC51
+:104EB000173BB61DB0D17FBE087C4C5FE410FF6A83
+:104EC00097E36AF860FCDD858F3DC7103F16A8D3D5
+:104ED000E7BB6D6401D0B574AFA40581BF63C8FDA5
+:104EE0003E5A6E5729A351B8F6A9322F2546C70E50
+:104EF0008FA2D2F6A5B75BB4202D137919997F3D07
+:104F0000FF5E61FCC5F121E829F88890C6F8699434
+:104F10008E79B9FEDD46BE792ADE43DF8F6F3FFE14
+:104F200020B144DA6D5F497C73AD91EF28FFFCCC72
+:104F3000D0AEECE1387F61E47BE04BE013337D6879
+:104F4000BB109397A7E2611EFBDACFCB80EF6BA576
+:104F5000ABF979EB4ABF6FA2B567F9F195C83EC0CE
+:104F6000ABF9F9518E5FAA1902ED79A0B5259248E7
+:104F700051DD2FDD7F14E05B6A6F4BB89DD2B7A681
+:104F8000E4820DF0B03AFEEC0DFE28FDF40447EB90
+:104F9000A55C878FCEEF60670CE2BB5B3BA0271D53
+:104FA000E7DD95337D1329833E119750C4952DDAA3
+:104FB000B3895CEF4ECC5A349929AD2EBB275D895D
+:104FC000216810146A47CAE00985AF62EC2E05EC2F
+:104FD0006719D1D94B37F6BB8D0C037A580D766D16
+:104FE00052D62DA7C1BEB42A6D6B1229EA5BD32419
+:104FF000B43F375F6A6C01DB75739AD560E72A5559
+:10500000637D126176528C334DA374E7EF2FE0FF7E
+:1050100007717E53558A5ADAFFD4ACB860804EF9D6
+:10502000D6B177F926EAECC57B97E5FB7D85DDF106
+:1050300033D92DF0E343BCFE3E96E26718CC73767D
+:105040003D43D3D5F161C6A3192F133F9D3F99145A
+:1050500075C7CBB5CEBF0BAF84FC04E6374993C907
+:105060003A7704AF66FCD0BF29F0DD7B25F43B091D
+:10507000FC820EC542EB95D74944F805657D7574F1
+:10508000E7F099F16AC69FF03726F176EF00BE2867
+:105090003F4D92B738801F2A7FD43A3199EAB1CA7E
+:1050A000418CBE2444914BF17213419C015EB721A7
+:1050B000DFB9ACE86750BBCEF8E3D3F2D3121D7F63
+:1050C00072277D47E12C57A5201511C0CB71135EC7
+:1050D0008E9BF8E2B87EDE66787F0FFFB82E0ABF9F
+:1050E000288D7920F713DCD43F01FF2183A857A82E
+:1050F0003D1AFDC9C844A61FA2DBC9F19DBEAE7E04
+:10510000183E1A916F24E2EF7AEEA2FD84346B0A06
+:105110004503996077A19C4C20DA9A763BA04246E1
+:1051200038055C97D37CB7BB69FB1252B9A65D8F7B
+:10513000E74F853D67F89EC0F13781040EC80950DE
+:105140002ADFE8E72DFABB57CC6730190CFED08771
+:10515000AACAF432EF4FCC2F399984240A6058B28E
+:1051600007B749003F09D8FA44C6B372FA9ECE9AEF
+:105170005EED46BD5E47005FE0B6003D4BF9FB5279
+:10518000BB2304F010BBB5A38B2EE0C390592EF0C7
+:10519000FB285EC895F8087C0FBB25E5645E04BE5D
+:1051A0003347EC0199F2F5C474FF0F000F1DD23B99
+:1051B00045802FEA97E5803E37BFBFF0714B0DBCAD
+:1051C000A7DFCDC7EFF8BC1683D34DF926BC3F2629
+:1051D000B8CD1D4D9FAF62FAD74E3D519D9C96C6EE
+:1051E00031399F447C0AF8970763999CB5C42E44D3
+:1051F00079282775F543697F7F8CBBF908C8592545
+:1052000009E077652E231FF6C6A7B790F07DE0F77B
+:105210004ECAB39AFCE800D2E7606C6E16D8B3832E
+:10522000B14C2F0BFFE165B7EF5937BECF08825E57
+:105230003EAE8D7A17EC4455C9888F46D2D262F7BC
+:10524000D9809EF380BF285EC7027FD1B607A1EB4D
+:1052500074E4AF20B49FB3D6C45FF664ECDF47D5E7
+:1052600018C055AA59BFD5FBD55D78E376B2377F14
+:1052700091B428248FE2752EE7D383B13101F0E396
+:105280004A9FA0724CF13787F89F6F94000EABC114
+:105290007F9F1B6B457F6FEECF6351DE69E32D75FA
+:1052A00074C8F9F4F93ADA0FC95307EAED3A69D448
+:1052B000B507FADB55E4C7B92EF6AC9DF691DE07CB
+:1052C000FAA5DA8DE2936CB69ED7F3A579FC1EFBA6
+:1052D00035B53B28919960570F5AD5815E9DFD7871
+:1052E000D36DC1F99FB7676FB1787AC6D37C7BB2B3
+:1052F000A68C88D44FC6C6CE8CE62788FE045EBB3B
+:10530000D617E49BC6967191F5C563ABBF6E3D326F
+:1053100048BFBEF8BA55737CFFF5C5A9AD5FE3FA87
+:10532000E2690BF50F016F8A2F7F9ACE2FFADACD43
+:10533000FC976096F635C8E1D3DC8FA41C943F6DD2
+:1053400068F7EFFA2E9F404E50168BB193406C31A8
+:10535000D5030A09588BE17BFF2A0BA5B73293A02E
+:105360005DA27A08FD4F331E4E6795FE03F856C8BE
+:1053700067691CE57F2A8F4F58D4A646F0B3DF96A5
+:10538000A9CF4A475F3E07FDBFDB962FC4F2DCF191
+:105390004B39A0174A39BE150FB3EBB5F14CAE6AC5
+:1053A000E3991CFD31CDAF78E8F3564D768EA4FD20
+:1053B0002DDE2B7B63102DE10CE0B7DBA6C8A9F036
+:1053C000FC84DD8AEBC7834E46FF1344AA00FC949D
+:1053D000BE17E3DB43CB47D34A723D3A3FF1D1B42A
+:1053E00089582715D4E1A37CB9CCCEE4E10471330C
+:1053F000B8D74ADEEDF4D1F9B5EE44E0CF8356627A
+:10540000F047D23D0AC29BEE6178ACEAA4C2398271
+:10541000F15D1D1DBF4A516DE0FF5775DAF039C0CF
+:10542000817C196BECC7E361FEB8C7C3F8A9AA5326
+:10543000C220C1C158733F0A7BCEF9DB4C87A7DC81
+:105440001372603E8FA669B91EF45F5505F0533A9A
+:10545000B2E563D087BDEBFF8004FABFF692141A61
+:105460004CE7DFB1C78AEBBA0EBE2E38B3E750DF88
+:105470002A5A2EDDF54102AC1FC7727A9D515A138C
+:1054800000BE25AF527FBA10D9B9EF3DD87ECEE825
+:10549000756C18BBDE2E5E7F3973A00FBFA3008E24
+:1054A0008EF86513EC8120C07770953C13E846EDCB
+:1054B000A6F0CB24D093657B642DB6A8BBBF36D5B0
+:1054C00063E5FE3AA3E3432E364E4FF25DDA194F01
+:1054D000823AF92E555405E02FED4CC0E7674E6D2A
+:1054E000DB3895F27D20CD8AEB436A855AD05F94F4
+:1054F000085FF0D13A9D4F0B9FCFE13DB7DD7E03B2
+:10550000FDE79B607FE83713DBFC294CD8E9EA6EA6
+:1055100074C4FF2A7319FD44B31F29EC5945F3865F
+:10552000FA0104F01EBCED06E0C3530A013EECE6AE
+:1055300067DB6FEEC19FDC807CF4DA9E5FE13AAA04
+:10554000C8A362BD76CF8572E0E31A129A01FDD638
+:10555000EC915D21FAF561B2A700EC8AB0FB022F55
+:10556000A14B87EC5EB00BB1B26B35CCD37E8743D9
+:10557000A578BAE15C610ADA3FBBB502F462696CF6
+:10558000B6638E8E9F0FA6C815C0078753328DCF86
+:10559000ED1B0BC0FEEDB3307DD472F26E471B7E67
+:1055A000775B0AFA71C2EE9BFC561127ABCC96834F
+:1055B000D1FC61226FD9144BDF4FCAB51219FCF729
+:1055C000B645E80F74B3FB97FCB83E30DB7F8177BC
+:1055D0008A6994976E7E6B04CF06FFF5690F8F97EB
+:1055E000A96428F8A3A14B1B17039CE79AE35DABC2
+:1055F000311EC1FC9D73ED8B364E81E7EFC8185FFD
+:1056000039774946793AF8C6E2C16D3A39A61604A7
+:10561000E97471F8D7675FA7F4B9F8799C3780FC13
+:10562000B7B320DA7A59ACA3E8C8FD2D69087F7FAB
+:10563000CB5814375CB7DE1459B7FEDA83EBD6705B
+:10564000399893B42DC76CC01767A80B0FF00628C4
+:10565000F1B753BCDEA4B5C92E1D3CFF97CB7791A3
+:1056600047DB057A25404A0750A7852C88D34A6E28
+:10567000007F741A716DA3F3D97FAA54B2D2FAB81D
+:10568000ED6EAF44EBBBC12105BE7D550E6EA77814
+:10569000D84DF5F16EDAEFC2D6469B9B8E1BD843F0
+:1056A000811A43EB9490808753D64046928E4F16D2
+:1056B00065B2714F59FDBF847E4E7D1243607D7887
+:1056C000EAF3B8A876B83893E9CDD7B99D7364AA40
+:1056D000D83ED4F1DA9BFD295CA14ED770C0FBA265
+:1056E00097BE9667D3716EE4FEDAE44DADF510D740
+:1056F00099BA25AC80FEF1055D656082A7BFE4B56F
+:10570000825DBA7D87CF0AEEF98C3D7556783F737E
+:105710006FE361A8DF1DDA89755BA6FF23C0EB4D3F
+:105720006BC387805DB21A89027241BE617E589850
+:10573000CB9DA7D37B3011B9BAC4027CDE35FE8A7B
+:1057400056055CA2A9F56C7CDA5F1BF657179E0024
+:10575000F62D6339EB2F831C5895A846FA1D7FA9B7
+:1057600055D2C71B4A7FB804F9E8F947970C4E0693
+:10577000BCFF358664BBB96CA4C0F38141587F126D
+:10578000A52D7FBADE3F23A118C637C4CE4AC14F2C
+:105790009A9DF1912B0EFC85479EA98B03FD90E20B
+:1057A000536D7E1D9D4A374E1EF216F0696C0CC675
+:1057B000ED2E0E677EFDC50D8E6080C5BB8700DFB8
+:1057C0000A7B5505F436C4A384BC33BEA75D04012F
+:1057D0000E511269B58BE8EB24940670757A187D2A
+:1057E0009B6CEA2C18AF292EC605E355D9B36DA0E2
+:1057F0009FBAE29F1044A47AE206EE6FEE3F753046
+:1058000019E87A71F8AA0C5817842CFF8EFAA83779
+:10581000BE5AE2D1923211CE4006ACABC4F7FB4E79
+:10582000C615823D7C5DF861DED98361BEA25D5103
+:1058300026F30BA83CE0FC851CA4B4126D6B21A2DE
+:105840004ADBADC3477E268BE38972B7550D3039ED
+:10585000A27E08C8953364CF0479DD9789F5141FBB
+:105860007178E9FBDABDD95E594539CFCF4C8DC887
+:10587000FF8D5CFE535AC32877D7BA3E706532BE9F
+:105880000D293BB9FC10D443203F4C4F870630FE16
+:10589000080C00BA805EE0F449976859CDE92CE61F
+:1058A0009DC2E57E2A976BC003BCAFE4F314EF6F93
+:1058B000E6F82A930B13DBA2C47DBAF86E793A019D
+:1058C0007FB16CF9002C2B39BC0BED1B309EBA302C
+:1058D0006503C65153B4462C174E6CC4E7695B662A
+:1058E000237F2CDC2C19E2A2A27C81FB5F674E593E
+:1058F000D07E114B5C7FE03FF1FED7E067B0B8F09F
+:105900001D80E7D37B363E53A446E2C2A79B983D59
+:105910005C1067F4EFEEE6F3DAFFCDC164E0978B3D
+:10592000B18D53EF0639D92EBB56011D9BCA2435C4
+:105930000AFFE9F10C78AD6DFA4739CCA386B4358E
+:10594000809E3ECDFD32B559427DAAEEA5653F2A27
+:105950002C4D4CBF9EB232FD7E4A4A96403E40BF1F
+:10596000839E3DF5F9BA8C47818F2427FA37A037FB
+:1059700077E9F863F18EAD0DFDE93F6FBAE41A0ED9
+:105980007C15528843AF9F059F087D6B867B05A7DA
+:10599000ABE0C31B22766805E00DE2A740B29A0D8A
+:1059A000E7317EBA81D3AF09F80DE479ADE0B7E114
+:1059B00016D4A726391EF32FD2DFFB9EFA4506C662
+:1059C00025C652B9A5727D1AE43A0A5FFC9CD36FD2
+:1059D00089C7BF29338ABE3F2DF97F999C1969BFBA
+:1059E000EFE42D43AA74FD3CC8F171D1EA1FEC8AA3
+:1059F00082AF085E497FA0F3024A19C003D922B9D9
+:105A0000C0EF13EF53B6B07D8097B91C89E7A22E83
+:105A1000F03D1EF09D89F87E3993D97D1B98E4B442
+:105A200020B3FBC4724B7FB0E30BE3B45B300EB327
+:105A3000C14220AE44A452E4F794A6A74F5E1E09CB
+:105A400065AC07F755A85F0DFBA50B9F50711DB8FE
+:105A5000FA8558E4B350A607E7B5BAC98AFC76DAE6
+:105A6000DA98817CF9F9A2C1B02F13F884D9A19EEC
+:105A7000F029F8E727DC5E0BBEF3AC677CD7A4689F
+:105A800071C077C28E0AFE3CBDFDE6629037D13E02
+:105A9000C237AEE1826F66D3E79EB56D32D087D252
+:105AA000ED8F8087CCF561D45F3DD14DECB709FA1D
+:105AB00009BD9E906531E0FB330E7F0AF75FBAD3D4
+:105AC0007195811E3746F8FF5333FF5BD5883CFD47
+:105AD000A11739B83ECBC5E20C9FCD4903FD22F694
+:105AE0006BC43EAA18FF2CE7879EF65B0EABFE3315
+:105AF00099BAF9C07EA08A7A9DEDAF94717F7BD967
+:105B0000F698600CA5DF3E7805FAA23D2E087EA22D
+:105B10006897AB104D2926E4BF33DD385E2EA80A06
+:105B20005A4F596E235974DC8BD71D6849A0DF4F3B
+:105B300009B74D1E46A7B6CFD676FBAD10F725DACE
+:105B400022F02730560F7CDEC1FA25AE9D0638AD17
+:105B50005916C33EA898774F76AB277A5C9FC5F756
+:105B6000C7F87BB39C1FE3F83AC4CBDEE53490085A
+:105B7000727A1309AC82FD117289B8C01E77C9E927
+:105B80002582F6657096514E453D8A9C0ECED2CB4D
+:105B900069671B93532E8F894D562D9A7F32348B14
+:105BA000AD7B139BCA4AC09E24FA08C63FE8345115
+:105BB000AE1752B906790D807CF6037C32FEF2688E
+:105BC0008DF7C17B4F13F3AB2F26B1F92EBC513BA0
+:105BD00020839C53BF5EA29F3672B9EE19EFA14499
+:105BE00089D9A744D027378D6B9B00F656857D81D8
+:105BF0007E303F46DFF1E3483044E9AE5E224C4F51
+:105C00007CFE8BFB1E05FDB0C1E1CD5623F627ECD3
+:105C1000F197001E7A9267CA971AC4A396FD9783DC
+:105C2000AD037BD81F1FBF5C46FEA37C7E4B960E48
+:105C3000FFE37D6119F09A1CEF4FB32611724FD329
+:105C4000D0E9F641747E6EEADFD2FA4C5A5F0F71EA
+:105C5000B73E6D84D79F72A47FFF38DD3D5985EF35
+:105C6000D753B80399DA5D59A9B86F7D0FC073D3C4
+:105C700080B00CFEE7B5EEEFD7427C8ECEE7F81D84
+:105C8000435E984D9F56DDE56B80B7228E3C86C7FC
+:105C9000916B9B87637C59174F5E94759578726FF3
+:105CA000E32670B9A7FC8DEBB884B16119F4A2D0DA
+:105CB0002BCBB3FA707E6E23B0AE10F2057A09FCDE
+:105CC0005A916700714527EE5704F17BA8271647C4
+:105CD000F4CDFA464B4534FE7E3CCB11558F92E60F
+:105CE000FFFE8F4747D3F9C22BA6571FCFD2E9D566
+:105CF000A6C6E37D999F4AAD3CF51B1EE46BF98D6A
+:105D0000ABBD7FCE02BE7B57C678CA7531B6800464
+:105D1000EB7E8DA8AEBEBC3F10BB6629E42CA2F57D
+:105D20006F25A2419CF25B19CB8D3FF655B8216ED1
+:105D3000F2B1C5BB9A60BE02E267EC6012B4D37FD9
+:105D4000EEE5F1CF92130E0DF200CE4976D49FE727
+:105D50008EC505C07E9E735A306EDEB23F06E5E208
+:105D600042561C8F67040D710FB19F73E19D39C9B5
+:105D7000A0F79FE1FB9BCFC4B2B8EA3377E5603C64
+:105D800052C46D1585E2BE0F84A9285EFB807F3C5E
+:105D900000E3A9228EDBD73E5B6249456C1CC5CE71
+:105DA000E6D757F14B101FDFDA4B3EC4EB59361ED6
+:105DB00007F0EF01FEAD5DD1668375ABF07B855DCD
+:105DC0001EDCE139007911832B58986C6B87C50272
+:105DD000F3DC4AD929C9DD9DBF041F6DED9E7770A4
+:105DE000204B17A79DF618CB3BE8AAF376BFE479C2
+:105DF00007E3DB8FBF02FE1C95F75D867665A97110
+:105E0000FE287A6BC6F21F62FB9EF87F8685F8A398
+:105E1000D99113427F2B7503C04E91BF3F12AF46FD
+:105E200089CBCCF8AC2A15F0628EA745C6FF318E1F
+:105E3000FF59168F1F65900CD85FEB6D3FD30CF7A1
+:105E40004756FFA068764AD0D93C5EF7F66C1DD65F
+:105E5000F59D8DF8773958BFC5BA7E53B299BF33D7
+:105E60004362FBF5E432417B2DF884E2FD3F812F54
+:105E700046FFE9C48838DCE709CBA00F2E7C9C35AF
+:105E800010F7DB7B58770A7808F16747CBEBA0E384
+:105E9000F9A2D121299BD1618695ED4748776563A9
+:105EA0001C60466C8C14A3F34F2E77D95BCDB02FBA
+:105EB0007B3076CC488C5F5AD581D1F067DEAFBDA0
+:105EC0009C45905F012FDE28FC24F695059E1B4A19
+:105ED000B41285C5C7C83630811AD3A3291504F773
+:105EE000D7C6481AE223339BF94D5B79BEDC857730
+:105EF00064D40BA34BD4206C91527BE1CE1E85F968
+:105F000057AF5874F957824F1A7E43EDB2217EC8BD
+:105F1000E44AAC9F93B83EA65EA3B64BF79DBA0287
+:105F20007440C41E0CACB71BEA190FB988A2B31792
+:105F3000495A9AA13ED0E78A8375D3C00AD5D04E7C
+:105F4000F09DC8FFC3BF1498B70BE34F7D383C6387
+:105F5000243FF20DE837880F97707AD2F98EC7F98F
+:105F600056B45DD0F38D986F6FF33ABE92C243156D
+:105F700058FB4A0A2FD50B73D6BB57A521DE5D040B
+:105F8000D6132757DAF1F93CDE3E69D3EC86743A32
+:105F90004452BD8A71D924ADEECD74C8B7ACA37597
+:105FA000FA37B7519260BD4EF50CB67B6EA50B4B20
+:105FB000416F177D2F817D2F2579B04FD3931DF32E
+:105FC000673B0CEBE1ABD8317FF6A8EE76CC62F7FD
+:105FD000BE05FBFF4B9B6515F862CDE43E1AF0D37E
+:105FE000C69D9217E26E879A591EDEC619CC9E880E
+:105FF00071CFBE9A8876E3ACC4E49CB424A11CD4CF
+:106000002671DAD427E17EEC39BEAE5E91E5AFCBE6
+:10601000D6E9CF8DCDA362715FD66497E89F4BA27E
+:10602000ED700F4E02FF69F85A2513F5C072809F7C
+:10603000CC6F1B119B097CEBFF609C047AE09B0CEE
+:10604000A0A7795F4FECFF897DC13FA6F95765EBAB
+:10605000F456F7FD3EE33E959C60C73CDEB132CB83
+:10606000E3D5D95F02745D037E22E5BB35C7E2103C
+:106070003F6B2E33F9A370FE04C669718E467E1203
+:106080007696C259F42EE90E67AD258CF1421D9C1F
+:10609000CF5C1D4E539E2B87AB0BFF7C7F4A762A2D
+:1060A00008FF3912E70538F7DABC1FFBC10E9F8DD8
+:1060B000C3F89EA04F0D97B173941E1285F3DCDEDA
+:1060C00011B11607F847FE17805EF2A07002F8E7DC
+:1060D000879A47E4C37C7ADAA73D9255FA7236CAAA
+:1060E00099FF37D06EBCABEDC26FD5C8FCAFB2BF65
+:1060F000BB0BDA7D07FCBCA6E7A3DEF053AB38D6BA
+:106100004A2C408E7E98C4F5B499EFA4E603FF05AF
+:10611000794754DE30EF339041826B28DE1A8632A5
+:10612000FE2373898A76D9C4272BB27C6F03FC4285
+:106130004EAF829F7701EEDA2C5F2B7C0F700C281C
+:1061400046BDF47E36B36FAFD82CD89EE5AF241190
+:10615000CCC731EF9F9FCEAAFA04DB0BFF2BCF2FCA
+:10616000B90ABF931C1CBF3A7F85902F96723C2DB5
+:10617000857D5DC857DB63ED30E44598F0F0789697
+:10618000AF83E181F2D948C6676BC855F11186EF3C
+:106190006BB3FC17002F4E2BE51740CAD8D9698086
+:1061A000E7C3AAF635ECFBEF5EC5F071EE4F0C1FAE
+:1061B000FBDA2DC8D74F93212897C596F3F741FFF7
+:1061C00054BF5C867EC685774AB06EEEB740B58018
+:1061D0005E1E10F6CA96ABF3AD9483EB27BF022583
+:1061E000A5C383408711EFB078CE55F8D60EDF7F78
+:1061F00007BC27E57C07FD43F92A15FA177C75AD26
+:10620000F956942FC8803EDDFBA3EB28DC5F38B045
+:106210002F06F555CD6E09F579CD1B5FE07ABDE609
+:10622000B51864CA89AFC5E2FBF37BD8FBB325D1AF
+:10623000F3013272FAA0DD59BAF3019FD14E07F093
+:10624000F9CFB4F3AE2C39B2BF9A3C859D435813B5
+:106250002BF24DD93E6B02E7B3E4413E0DEC507298
+:1062600019C17CC10407CB43EC7EDE80C96D2A6F67
+:10627000E772A912E0D97CFE408E63F985A964FD1E
+:10628000D780A7E40AE3FB544705EEBBA69ACE29C4
+:10629000087C97E570FFD946D2408FEC34E55588ED
+:1062A000F2FD1CEE07D627E17A50E170B5386DC8D3
+:1062B000B7CB9C769CF7B224923C19EB0ADA7F7339
+:1062C0003F5DFEA76621AAFE1C45451C5175FE5187
+:1062D000AAAF8FA1DE6F667FC3F7E97E8FE1FD80F5
+:1062E00005430CEF07D5151BEA83975F6FF8DE4D6A
+:1062F00011A0AF67AEBDC5F07D76E374433D77F383
+:10630000DD86EFF3835586F7052F2D32BC1FBA7358
+:1063100099A13E6CEFA386EFE51EFCF26773589CD3
+:106320004D167EB973A41FF84A76DAA518DDFA6F08
+:1063300019A7474942451AEC5BD63BCBD3607DDABF
+:106340009244EDF155E26EDF77DDD628E8CFFDAF60
+:10635000521E773B7B906A11CA7F3587281F0C43FA
+:10636000FFAB3187FB5FB355F83E6C437BA278717E
+:106370001E3312EC184F33F7BF2C478DBADE922D27
+:106380005ED764A9677C09BEEC0D5F9B395EFFB7E1
+:10639000F8FAC8943724D67BE6767FCEB1707FDCDE
+:1063A000BF3B47BFAE2361D987EBBA6FCE0608E883
+:1063B00051827E4D6DBC0BE312663F408CFFC734AB
+:1063C000DFEBD08F599FFA96CF67DF59E80243EE93
+:1063D00079BDF7E71CF37AAF6C26D223C966C0D328
+:1063E000FE2E3A6B86F55E7DD2685CEFD55BB5B468
+:1063F0006B59EFEDCF2188EFCD40D7541D3D6D5E39
+:10640000D5857ADEE8BF74F7CFA9FDA3F3DC087E5B
+:106410009D047E5932F3D7774B386F31EEF7F0CFCA
+:10642000DBF5F6A927FF3C8678D72A32D2EF4BB0AE
+:106430004FD41F7F3056FE5EFEF885EF620FDFB748
+:106440007A318FFDFD29325945F178A1624C3F1216
+:10645000451F8BF2288FDFECCE2548B7DEE21FEF19
+:10646000AF5C70D5F31CEF57B23CCDE9C047BA71B1
+:10647000D373195F8CC8E5FB92312C8E71E63F9C7B
+:1064800078EEE0CC2D1F261027E4B78D1819803C3C
+:1064900066E27D08F26F020E27C609A7578E1AB969
+:1064A000CAA9E3ABB10CCF137EFFA70488FF4CDF72
+:1064B00095991A70F4CC4F23F8FC88D2968379D939
+:1064C000AF9FEEABD272FABEEC5416A734E6AD998C
+:1064D000E346D397D718E47869A74482C9BABAD2F9
+:1064E0008AF9814B3B157C7E39C71857EA115FD773
+:1064F000884FF37381CFF72B4F67403CFD6C6C7472
+:10650000FFE37E8EEF2EFE319D83E9E97C4739EF74
+:10651000FF42C575FD40CF4DB7A9D9D712E7127814
+:106520006ABDF4453CE88937E07C4D94FEC7E7B28C
+:106530007DA537B4CFE1F80329B1872700DF97F0B5
+:10654000787A94BCFFDB7261BDD459F12FC9FB9FEF
+:1065500095CBE9C3F3EAF372D5A879FFBD9D5F9AA5
+:10656000668B6EEFC646F0F721C8EB83CF595D000E
+:106570005735F84E10BFDB6AC5F8DD07976208ECA7
+:10658000A77CB1C5FA2BC8575BF05CE6739B687DAE
+:1065900041650CEEFF546FB5B2FDB9CAD82084AA8C
+:1065A000166C7DB8EF1C3ADE57546E9764D3F7CF64
+:1065B0003D8DF9331FB4AFC3FCEDD320CFF4F98286
+:1065C000CB8FCF00FCEFB335160CA7E5921D92E1FF
+:1065D0001CC6A2A658435DE4030AFA1129723E4381
+:1065E000A5F6A421D7781E6B4464DFAC2197D96B44
+:1065F000CCB3AF99C2CE631D3AC9D6FB87B358BEA0
+:1066000060A8F2CEC9C3E93C2A53AD182F31E71771
+:1066100012824427F379FE6FE5270A9EBBAD1CEA80
+:10662000443FF0CD95754807DACE51A63B8F50F91F
+:10663000731677A974B3BCF91EF30E4DF986E27C8C
+:1066400050B73CC3C8F9A0E3D1F8E657B946B93E04
+:106650007492E515CE7F4766F3EA456F1EE5F3F8C1
+:10666000A07DC8BDBFA5F8F8A08269F10F2EDDFCA2
+:1066700018C4BDBEF04904F23CBFB814FD5CDA3F5B
+:10668000BAECABBFEBDC0ED0E7B68A855D7510CBFC
+:106690003B7C0F18CEF55CBBBEB9BA3EA9CE65E710
+:1066A00032CDFADDCCF7FFBFF4FBF4CAC3190127E2
+:1066B000962F40D9B18BE947B39C9BF5B980CB0CA1
+:1066C000EFD24ED990873C16F4C028BD3EB7E17B8F
+:1066D000EAEEE37C02A395E01A09FD80CF81EF4743
+:1066E0003A82C92574887AD7B6F8ABC56FE8FAF94B
+:1066F000347C5FE3F6774099FCC7FEA560EF47BCAA
+:10670000B313F308CFF5904FFEA1DB94BF2619F722
+:106710000BBECD2DF910D6FFEB54560AF91C498556
+:1067200090E73B7C9BCBF6E57E0AFB96356F5D449C
+:10673000F97CDAE64F83F840A0BFCDBB3D4A7E88A6
+:1067400092F7DDCE25EC80F83CD03D2FCFB0DF07AF
+:106750007122CC5B381E8771A2E7D3B4B83CFADD56
+:106760002B695A7C1EE8F334CD91A7B34FF57C9E7C
+:106770008A25BA5F5C9627F8DF87767C5E29D5BFCD
+:1067800051F8D09BC7F2F94B9EB92B03E2719F1FC2
+:10679000BB3B03F463CBD363AE9AD7F633904FAAD7
+:1067A0003F9F04BD9F1DD94FFD09971B11EF9E67A9
+:1067B000F3E5E8F3B192F392D87EED75BB5B3D94BF
+:1067C0004FDAD7CBA8BFDB1D2C8FED8443A9682AF5
+:1067D00064ED520CEDD8F90519F89ECAB1E250BE2D
+:1067E000D5EBA332E0E9D49EE759C6E964235E3BCA
+:1067F000B4B71DBFC50E76549634178BFF337EB8E1
+:106800008E8E00FCF038D76397D3FCE301EF366E31
+:106810006FAFE3F6567198ECEBC0ABEF8FEF4DD353
+:1068200026423F77A7696540D7BDB64001C8CDDE97
+:10683000B8E8796993F2983F129BC7F98538D07F01
+:10684000C5F164DCA79F9AC7F6E97D50DE3420BC11
+:1068500006F2C93F74BBBAF6B97D789EDE7707BCF5
+:1068600027696DE456C893A3C0C23987D74F1D2747
+:10687000A0BF12C2ED04F269124CF9AEA2FC2A8F3D
+:10688000F91FAFF17DCFEE72C7F8CCCFE16CA2F269
+:1068900002E74185BCC0FE3AE44BAC53FD5CEE58C8
+:1068A000BE47D3537D24D867F168AA05F803F24C9C
+:1068B000413F99F3839AF3981E053994AE22870FCE
+:1068C0007F47396C7A6AB22516E07C94605E075582
+:1068D0007EABEDB4FEFC329717CE8765AE27B80EBF
+:1068E0001AB43C6E1BAC93025C9E066F22AB63E94C
+:1068F000D76E9EC727F2A2DDF56D0A9E177894E544
+:10690000E99DFEFC16D909FD7F2DFA37E6058A3C84
+:10691000BE468E5F318F251EFF93C01FE6BCEA9EE8
+:10692000F3BFBECC873C87E784BCF33C9C713C0F33
+:10693000675CD3D3188F1BD774B322D14F9E5742B5
+:1069400012ACF79EAFD314B037BFCB637939BDE536
+:10695000C1BDCCF9B191D3B9A77CCA17F87751F270
+:10696000295FC84BD5E593FD80E5533E9EA7E2F72E
+:10697000CFF33C9AE7EB58BC6ED14BEF49FABC39E8
+:10698000F19DC8BB1BF810CBBB7B5E698B05FEB9C4
+:1069900018CBE875F10771C15518946F1B1EFD1CCB
+:1069A00082398F9CE58F0F0E874B301F8810BC07F4
+:1069B0006148BE6AA0CBD6B02B0EE4A5377BF0268B
+:1069C000A7E7B5F2E18BF90C9F51ECE63B80AFEF06
+:1069D00060375BF398DDFC20EFFBD84D6E2F85FD13
+:1069E00014EF8F717A56E751BBA9F36B7576F358A4
+:1069F0005E14BB99428298A7413A2C5E7D5EA8281E
+:106A0000FDBCDFB73DDA17D07E1C8FA724741C278E
+:106A1000924E0F4DE7722DEE9778B10FB97F5A94D1
+:106A2000794CE1FD596685F13E8A8466296A1EDA51
+:106A3000876EA64FA85EFC4F94B3C1546F4ADDF534
+:106A400066147AFC13BE1FF08E760898E4FAA4A6AA
+:106A500078709FAE420F4B7E2AD04393A114F82F3B
+:106A6000BE625C470AFCC7E533F9ED9BADC5E6D3D2
+:106A7000F22F5CCE7AA24B7A3EF36386F052E4A901
+:106A8000EF36F9A313F2195E6ECE37C61575F44BC7
+:106A9000CF8F423FA187DFF6F806023CAF9DDA1D9B
+:106AA0000F7C24E824F48F995E11395B25F6C9B375
+:106AB000F3A3D81FD1DE6C8722ED0308F756E0A3BD
+:106AC000912CDF07CF11F0F308023EC1E71A9FE7D0
+:106AD0005F3DDA7080D70CA7ABC3225D0DCEA470EA
+:106AE0008A04F29FA4B9B07CFD944502B85C6105AC
+:106AF000F3DD5DDC3E9AED2055171CAFAC9F17B956
+:106B0000DE6838C3F2101B4AFC6910FFCFC9D626D5
+:106B1000025CD5795A1994D7656BE5507EE8667E9C
+:106B20004B7ABE560175912F6086D397DF957770AB
+:106B30002BE033612209803D84FB64609F2581E75F
+:106B4000312468AE52B063095B08E60924C7870F99
+:106B5000C4C0FEDFD3C40BE79F7202AA05D65F99BB
+:106B60000F69ABA16C38C3EFC52921787EB22B8F9A
+:106B7000AEDE837974206F7A7EADE278AECA677A32
+:106B80008EFA21F7E733B866E7EBFC1021473DF9B1
+:106B9000153A395C80EDAE5D0E6BF3BF9B1C3EC8B1
+:106BA000E5F0A16B91C31F46E4F051F8BE37395CA4
+:106BB000C7E5EFC55EE4F0FFF07E7F97DFA31E5DC3
+:106BC000174D0E459EB0E0779043B0F741DE1FD5DC
+:106BD0009F3FCB4FFD5E72B9399A5C9AE5B1ABBF6E
+:106BE0006BE4FF9EFCBF0143FC7CDED1FDBF1D3C7E
+:106BF0005F5CC833959797B9BCFC9ACBCB0E80F7F6
+:106C000043B78AE398E5ABCBDE84999E80FC3C7D5C
+:106C10009ED6E108BE5E857ECC7939E34CF1FCCF8F
+:106C2000F2193FBCC3CB84F071027A81E2ED8D7C16
+:106C30009DDD7891CB4B602CCB3BA5925A0A7EE52B
+:106C4000BE0EEA470238F90CDE719B5B0F81DF480C
+:106C500094C678B8E7AA273C7986A8625F202A9E66
+:106C6000E8F87F86F1CD746B06BA39BAFBF3667A21
+:106C70003573B90D737C7C5F3804FE008E61088724
+:106C80006A59A7B3F39F733D41E16D0778C74F0C75
+:106C9000CB04E10AC5C3FE89D0A764206D3FB27B57
+:106CA000FB8E48FB0EA0D7788DB62F8CB44F825048
+:106CB0007E26E831AACFD04FD6F0BC62839BF18309
+:106CC00099EF9B6CEC7C4417BD1AFB23BDE6AAFE32
+:106CD0006FA1FF26859D1B695AEB92D8794096EFEC
+:106CE0007B225343BE8DA287C890EFA68794214C88
+:106CF0000F59875C831E720CE9D243F1F07D38F79F
+:106D0000EA7A6800FF7EE090ABEBA10CFE9D67483D
+:106D10008FFEC0009897590FAD53191EA2C8E960A5
+:106D200080EFDB5C4D8592CAA97B486AC4AED17600
+:106D300099509FCBDBAF6F64F9160112E78DB6CE89
+:106D4000F00E715C6BFE9997C3F99DF2A837FEB8FF
+:106D5000CD06F816794E625C73FEB4A0634DF3AABB
+:106D6000116428E4695DCA00BFF2DCB16F313E7284
+:106D700024AB4A83F15BF68F31E46589F197F178B2
+:106D80005A995CB813E2B3E78FD830EE2913F5D9DE
+:106D900071149EDA235612443DC5EE1B10FB61D6DA
+:106DA000230DAD108FB712DDBD50B89E5113816F0A
+:106DB000AD47D8FD4C2485BD0F10FB2A76BFA371CB
+:106DC0009F3F4933EEF32757F431EDFB1BF7F9FBF7
+:106DD000CD34EEF3A7FB8DFBFC0316149BF6FD8D63
+:106DE000FBFC8397979AF6FD8DFBFC996BA79BF6AE
+:106DF000FD8DFBFCB99B8DFBFCF941E33E7FF55B10
+:106E0000AFD8605D5DF0D232D3FEBF71BF9F22A4C8
+:106E1000354B775FCCB0BDAB0DDFCF6D63F7900D19
+:106E20000FAD33B66B64F71504E87F80CF2F88DF92
+:106E3000067CA690F09B0320BF25287943F4B385F8
+:106E40007B778D86B298C7C5AB371BEF395818349E
+:106E5000D6BF7ABBE208E481D58210D17E6A5F9208
+:106E6000824177CF745FFC92B1BD88F32EE6F3398F
+:106E7000CF9D82F35B643CB76CE693EAB76E63F731
+:106E80008605B456B8F741E041F08B8BF38B804B0D
+:106E9000E063B1BC04E55CE041DC9F55639A7FB7D9
+:106EA000F9EEDD8AEDCCF336CF63FB90AEFBB0702C
+:106EB0003F8074931307CB13A2F3827D72399067DE
+:106EC0009213231E7AC2DFB5CA8DCAF1109366945D
+:106ED0009B5835CECC77486F333EE3F38CF264C6D3
+:106EE000A7D3DB3F2A7F89FB4F713EB01FB25722E9
+:106EF000BF90BAE37541F386860151F8897A7E988E
+:106F0000E761C6EF7B26FC1E56FD47413F5DF8F862
+:106F10001B19E9EA6F1B01F6EC2AF9671FF3EFAFC3
+:106F200075BFFD187C2FDA9BF7DBCF419EA4EEBC2A
+:106F30008AD44537CD942779E8BF601F89B6F1DB45
+:106F4000200E5BE1B5B3FBC0CCF96BFE736047026A
+:106F5000A51AC138E079E25D43FB5BE3FC8F825EFA
+:106F6000E2221786A0BFEBC7FB85C687DB2EFC1687
+:106F7000BA575A5D304EB47B484DE70F2FC3B8DF88
+:106F8000F79E47E1B7D3759252C0FC6E5B817E9D40
+:106F9000D475BF2A5BEFF4D48FC823EBA9940ECA33
+:106FA0006857C3529C37DA3D65E905467BAF3BE73E
+:106FB000995EA0B3A3350F5F7813F41EC5F7407830
+:106FC000EE7452FF46BA26FF4685EF9F8D4F40BEB6
+:106FD0000EBF250773DD707F959AD8A7B0FB7D4B58
+:106FE00022AFB00EEE534A86E7F98957CBBF28355A
+:106FF000DD7365BE97A8A198C155CCE7E9E7F75DB9
+:1070000095F3BA389726E271B53359BCF969531C28
+:10701000B3BCC0C9DA679596039D1ADC12FA4F0D0E
+:107020009264D84FBA38A4A41CE6ABF1FECB21364B
+:107030009F8AE7EB10AE14D33ADE52C0BEB7149469
+:1070400062092B7AA0B74D96A3E2735201835FF8D1
+:1070500051DFE39E99A33123BBDF3363BE1FB13CF5
+:10706000AFAE05D48379DFF7D5DEEE99395A1E75B8
+:10707000FF17F01BDF27C2F7730B8CF72086E2FCAB
+:107080001BA7403CE24FB217CE9B98E7FD4001F3AF
+:10709000FBD7F3750BEC2BC17AA40F2FBB7FCFF07E
+:1070A00014CCF23D807855285E29BC211BBB0F34DF
+:1070B000FC21C171FA2FD00E407D944FC5F3150D00
+:1070C0006EE280FB82C2C32D181749F1BB26C2BDF8
+:1070D000BE295BA43E804EA117AC0A093829BF34F3
+:1070E00016B891CEEBC99A0370BF49E296AF8907F3
+:1070F000D713AE892ED0477349D438E7937C3ED35B
+:107100009EF328B02E4BB447BFCFE1493E0FAA1FD4
+:10711000D6C13CC6DB8F8D903C11FD024B5BFCBFA2
+:10712000768BE15CB3284F644E68047E1DB580F415
+:1071300010F7647C7A83EA7B06FA1F7554C5FD8AD2
+:107140006AA1A7E75A08DC3B7A17679FBBB6B0FC79
+:107150007572E9CA1559F8DD04FB27B07F50BDC42C
+:107160001984FD84EA6637DEC7471648B8CF51DB7D
+:10717000FC9E0FEAD52347BA50BFC54B12DCCB08A3
+:10718000269FE933859C14FC22F349D1FE6772FBEC
+:1071900020D6F7D41EAC8FA778AFDEB2F5009C8F57
+:1071A000F87FD4F003DD3E96FD1FFF90F67B073598
+:1071B00052CB8BA154C82C8CABA7613FB7F37E0296
+:1071C000DF12E9A43D32EE1DCD6FE17C3EB6928028
+:1071D0009D3293B5940D6D7D3411F75B457ECE0CD9
+:1071E0007B6319D8B973B670119C9F3AB7FF2F8390
+:1071F000601FFEB31F5D70C2BEFCDF95B0139E9F83
+:107200005AF18113EEC5FB6C05BB3FEA3E6E3F04AD
+:10721000BEFFC4F5825AE86B01BADCBFF2F268FD2A
+:107220003D3864792AEAFD854119533A845C2D7E04
+:10723000291E3C9BAEFAD29DC986BAB0074B634863
+:107240005DB438A1A590F1D1C21D5B6D035418DF68
+:10725000FF118C7F0A1289295D4EED71A2DF28E0B3
+:10726000A9DA31DC067EC6DF9B634808D62F4AAB1D
+:10727000959DBFD4264B941FFC9CEE6638DF7C2383
+:107280001EFB9BF734D33FB3E958CB295EFDCDEC11
+:107290007E4BF33CE67DA696F7A3F89EF704B5E88F
+:1072A0002AFB7E05A59B7FF9E3984F6D9EE7EC8056
+:1072B000F93E4B0DF55F35A7EF9CB5C6F7D5CD4F21
+:1072C000623F7389BA1EF206E7359ADF577E017E68
+:1072D0004CB5293FBB53E8A7D1640CE8A783F6CC93
+:1072E000C468E73045D9B1D285CCF9E54A3B96A7C9
+:1072F00056122C5B0A18DF2E697EEF11E09F9ABDB3
+:10730000BBF0FEA143C15129D7D34F263557E27EAA
+:10731000E124BE8F7C6FF7FB34E30A69FB890ED34F
+:10732000F9673EEF599C0EE23CF42C986F113C57E4
+:10733000BED1CFE7FC914C07FA43853CFF660C9D1C
+:10734000977CEDF312F311F313EF97CA94DFA2B415
+:10735000177CDE52C0E216739BA635F4A7A858B37B
+:10736000FF0B5C2F13D37D7A13EC4FB6F27C33C343
+:107370007D79F4EF28C8AFE0B76AE2C5FB43CD7C66
+:1073800025E84C1CD600BFEF18FDF82E7E6AFE09DA
+:10739000E245D01B6EC6D3DFC744F9CAE037533E7F
+:1073A00032D4E7351AEB67AD6D1920EFD5A6DF476C
+:1073B000386BCA2F11A5A7D083F23757D5CAE11C65
+:1073C000CD3CE26B6079B8EC1CDE29A5F1CD1F82C3
+:1073D0001C363139F83BA7FFB6425F6521DA2FAD85
+:1073E00008EF415C9D2EC345BFB3D74B2E90AF39FC
+:1073F000F5C3F13E9D62A2617FF7F6E0872D296417
+:1074000074A8AAB3121B359E55740CD073557B64B7
+:1074100071CF95634A5FB8B785D163E913BB6CE957
+:10742000B45C5057CDFC8320931B718FB4E03FA117
+:10743000FF17AD3F80EB70BAFE30C8572D9C8B28EC
+:107440000239363DAFBB19E9506BF213AA057F7ABA
+:107450008917F8D3FF88D30EE7AA7A9B37E91E5F16
+:10746000C1F8CBF923D9E83F9E57D57EF09D3F81E7
+:10747000DD5B2F29FE31F09CE20BED5478553CDEAC
+:10748000E37BAC53262ADE37E21F03E7DFDBFE3A5D
+:1074900008F76305BF8AF9D6DAD723BFD612E3BA55
+:1074A00072365DC040DC74F6F664CCDBA2FD17EDED
+:1074B000057F63BB15FD8900599606F74CF81E63DE
+:1074C000F7D056ED4DC2756D553DDB6FA9DA91844D
+:1074D000E766E9BA12EFF716F438563FC1968EF414
+:1074E00072E33D5964AF91CF059DBAAF0B4D745A0D
+:1074F0007BE0CD34B5FB3A5147A7F61EE864B89F50
+:10750000714B21D78F9C4E6405D73F0F1CCE867DD3
+:10751000A6F375B15E39CA7AA3EBFEDEB9D7637EF6
+:107520009988C755F417BF27E0ED0B74BDB07E14E2
+:10753000D2CD4CAF8A7FCE41BA90BF3A09C469EF31
+:10754000CD24F74FA7CFEF9798BCDCBBA6B202ECD7
+:10755000F9AB85CCBFFA33D55B5A2E5D0753BDA579
+:1075600051BDF501D56750FF70651AD6FFB252C5FF
+:10757000F293957958B673BF5FC81165041BF8592B
+:10758000AF73F979BD50AC971E4A03D7A2E29F1F93
+:107590008CB240E83370DF8CB24184DCAA19EDE193
+:1075A000CCDB8DF6AECDEA2A87F3BC8127D87D6887
+:1075B00055BE1B0CDF1345B5C13DB8246F44E439FB
+:1075C000CA9B6A83F3E8774D4E367C3F63ED0043F8
+:1075D000FD834295F995159986E777CF2A30D467D0
+:1075E000F3FB5C893A16E5E6219E374AC8584617F0
+:1075F0009E8FF24DDD987EFF46E1FDE61D2BBE37E6
+:10760000D343D075EE6699F8697F733653FD4541D3
+:107610006C6FA474A2EDBEFAD809674748C38E11F7
+:10762000EF8EA5F5633B58FEEAB1FAE49F82FF7442
+:107630006C476A02C451FD0D32F7335C78CF99E88C
+:107640007742FD2ACC53991D8CC17308B35B02CFDE
+:107650008B3AFCC400BA78203747E5604842FAB15B
+:1076600038C0CB3118C73F45FD3A571FB83F8CD4BF
+:10767000430907A712E9FB7FB4A60641AE2BFE29FA
+:107680006B69C04F2FC7F27D1A09FBFBF2BDEC6D91
+:10769000EB90BFD49D2194DF185C2FCC6963F3235A
+:1076A00052F100A0FFA924A2255120962EFBCBDF8A
+:1076B000144AA78539AD45704FCC2C7728F54EDAA2
+:1076C000AEA3C9CAEEA5A7FDBA687DE9AF63B6321D
+:1076D0007DA2F5837B2222F80C16C1BCF3FBFB6272
+:1076E0008652FA7D393F58847A6D452ACA9519EF3A
+:1076F000ED363FE23700722045F46444CED8FE1BDD
+:10770000556EE9A06FE658BD7DC15EB5AFB7B27BDF
+:10771000E1142D611A9E33DD8D7CDCAEA8E530EFDF
+:10772000F6B56EBC4F478C5BB55ED6D87DB8942F4E
+:10773000E1FB0DB21FEEBF11762BB056F2C33D39FF
+:1077400066BE79F0813198F76EF67F457996CAAAC0
+:107750005FE7472CDA2FE3EF5890916DCAED86FB77
+:107760001DD9EF7D10FF58433EEA12CF1FFEE6B051
+:10777000A05F9308EB8ED34765E4B3D39EC6D1696F
+:1077800099905E7270F4BFD1FA57530227E15CED15
+:107790008383FD2301AF8B2DEB3360FD74AEF9C401
+:1077A0004FE1FED82F7F63F5C2B08B5E5E3818E3E1
+:1077B000F4DCFFEEAEB7C4FDA45A3ADC17B458DDD2
+:1077C00089765CDD211136FF20C229ECBA6B9384E7
+:1077D000F7049D18E55C07EBE539A6735D27F8BD56
+:1077E00015E543993E11F6FE315E9F63617C4DDEE7
+:1077F00090D8BD52FCF71E843D10FA5AE8FD19439B
+:107800003D2C9EC1F535213B516FCD87DB94E83C83
+:1078100097BC14C3E2CB2A5DE08FC67B4BF16FE3CC
+:1078200050A62F16D97EF30CC852356945F8BFB45F
+:1078300006E7B7BAA1FDD6FA3ED8DEEAC5782BB77F
+:107840002F70AD3DE8A56A2E7F4B1B25BC1F8970AC
+:107850003B398FF74F5EB246EC86278A7D31D9954A
+:1078600079DCAECE23A6786DA3D1DEF9E2D9E2773A
+:10787000111D17EC67042EEA3F53DCCDF707DF9CA0
+:107880008A704BDE601438AA493804F7442DDDC1F4
+:10789000E2D766B8CCF3B85638E77BA74D4C1AA9A7
+:1078A0001BD704B7C037067C757410789F1F60F82B
+:1078B0009CDFCCF6033EE7FE1AFDC338B399FED534
+:1078C000C43715F2F3AA3751FDE98EF083E08385C2
+:1078D000BB82B85FF115694C70503958B279D78CBA
+:1078E000EB54583FBF87EB90597D42D99624BA2E6E
+:1078F00008BCFD4CC5A0DEE3F5FF2A3C117E6F36C7
+:10790000B6A37899D7C4EEC5D67DC7F3D00388AFA8
+:107910000581800DE2990B787CB037386B1576EED7
+:10792000BD7778191EFFD57087861AFDD8887F9499
+:107930001D75BDD5E517F5628F3FB58606813D0EF5
+:107940000F52D01E7DA378FF529202F6391BD70D3D
+:107950003DE9DBF9DC2ECF033B4DCB939B5FC17B35
+:107960008F3EDFF40AEE8FDA7E332F01FCE5939B26
+:10797000E7FC14CE059CDC3107ED72F52F845DF633
+:10798000DBF4F67EC2E6D9BFFC11F0E94BB118D7A3
+:107990009FDFE2E7FE38D57FA0173733FD4736314A
+:1079A000FD580DF6AB10ED572E7CF7C87C7F2EF0FE
+:1079B000BBEE39DAB547E6F8C7607BE20AF1FB7B3C
+:1079C0004360BF847D1576F7DD74FFD9A16017E4AD
+:1079D000773EFC019DFF99DD32C67496CA5B33E0A9
+:1079E000F7507AD2E3DF1FDF962E7CBBAF01DF5565
+:1079F000806FF48718BE8FAF65783EB19EE1BD61A0
+:107A0000476602AC838FAFCD443FE8F88E6CC4F775
+:107A1000DC7514DFE807AB463F682DC537F8FF80FB
+:107A20006F3A6E558BCAF1ED65F85ECBEDD07A56A4
+:107A3000CEED86D7C07DA0571EF9558C17EFA18ECD
+:107A40000DA5C23AE5D42E9940DE42979FC4FD1998
+:107A500081E77F90C6E7C1AFEAE6DF6C882110DFDF
+:107A60005CF8AA13CF0D7D2995F403027434FE212E
+:107A700001C68B8CDFE5D7788A46E9FC9A6BA44F68
+:107A80000DF1615E7F4DF31F3E06BF1EAE1D827578
+:107A90007F8DB82F62AFF1BE0849059D86E747ED9F
+:107AA00076E08381E6FB34FCF8FB3017B3BFBE6F92
+:107AB00019CA733847BFBF521B17B2423C2ABC4B8E
+:107AC000427A2F7DA824A184C0BE541DC231BE8835
+:107AD000AD2B244DC338630CE59B38B8AF0C2ED1C9
+:107AE00085E7AA8BC51DB7D0719D1178CDCFA78230
+:107AF0002202FBEE881EB7AD2B627EC052D982EB0C
+:107B0000902536B61E11F921B7F2F7B716B175C92F
+:107B10001D452CFFE21C2413D17ECF6D88E7F9CEE2
+:107B20001331FE29EE0B5004DE5CCA59C3EF27F077
+:107B3000F8C2DFA00D85736E0C8FFFC24FB6D0F672
+:107B4000F7F0F6F734FE09F7E5E84AE639B0BFF793
+:107B50002E8FF1E2FD8C701F1CE5BBC7E3D83E0AF7
+:107B600049495440AEEEE67AF69EC6277D608FEE18
+:107B70006D8CD7A0A4E304088FB78E847DD8FE3621
+:107B80008CB7CEB2B7FD06DCEBFBD34E3C6CA753F3
+:107B90005B6561FECBAA3E04F36B8651371EE2B7EC
+:107BA000F4D59E2BC957E31F633C7909C475AF27F1
+:107BB0008CB1C6225E0D758A5FAC3714DD70E7A606
+:107BC0007184BC4FD4A140EF25801BE087D9891870
+:107BD0001FB815E2CB7DA05490CFA62B246061E5A1
+:107BE0005A07DE87C1E2CD53F9BCEF184B428974C6
+:107BF000BEA1B78821DE7D67C812CAA574B8550931
+:107C00001D00BEB6D8552BAC0F7C155231AC9B97DE
+:107C1000ACBE36787F5E547EE7A681B46E61FBFF12
+:107C2000E11F48787FC93D54C8813FEF53488B5CC2
+:107C3000CCE807FC57DB87DDC71D7E80F1B788B332
+:107C40000B3A0DA7DDEBF17B0F878FF6B33601DA28
+:107C5000DBA2C797B673B9107EE7622EAF8B05BF64
+:107C6000ED30CAE961212FE0E752BCDDC3CB9EF8BD
+:107C7000FD20E7F7839CDF77168975F8B58DB7345B
+:107C80008684F4BFD724C6BD9597A122E63F0B3862
+:107C9000043F131E9FB250CD017CD4DEB806FDA672
+:107CA00005A67831D1C7B1E468F52EFD63B902A508
+:107CB0002D3C17E0916E8AF5025FDF63DB99CDEE14
+:107CC0005F317E27F6716791562BBF8F8CC5B9B88F
+:107CD000BD2A931D784E7F96C4EE5F3A57E20C584A
+:107CE000A8BFF829BFFFE47C1D3BFF3AEB07EC7C03
+:107CF000E7BD898F4C05FF7056824D81F253FE3BE4
+:107D00004FF79356A7DB1DF14F1A4A647E1FE8BF59
+:107D1000DD09FB196B40AFB0FAB3DA388C2AF1FAFF
+:107D20008ABFC0FBDB2F513EC0FA8FEED4E8B8E724
+:107D30000EF3F7015A87FD92C7043FAFC6FECE3D52
+:107D40002DDE37B0FA13E2FD93ACFE13D13FAF6FD7
+:107D500030BD5F657AFF7356BF50F4E49D70CE71FD
+:107D600016DFC79975BD847AA518F88DD277D6EA43
+:107D700010E27996E5202B4B4908CE5DF4F6DDE064
+:107D800061BEE2A254B8D7A2DD09F63B77B886F50A
+:107D90008143FDFF04BBB6689A14B081BE3C1ACC87
+:107DA000E1FA3D6ABE7631E7DF415ED69FC037ED2E
+:107DB000276658EA77EF6707C035CAD08FEBFBF428
+:107DC000B3BC3B3CE9DFA79FCF4CFD08FFE8E16275
+:107DD0006D24F44726DE6088FB2DFEB13711FC2BA5
+:107DE000F22EFB7DA5C5AB77668CA0FD2FFEEDBE08
+:107DF0008CF9BAF5784DA74C34AA8F6A3B252CBF75
+:107E00003AF0890DEE1FA8D973C0565E08BF0B73F8
+:107E1000C0364107D71291874ADA94E93AFB7EDDF2
+:107E2000300BD71BECF76516FFF634EE772EB6EC69
+:107E30003CF90B88035DCFE272E6F9B979BBBFC1AB
+:107E4000FE7314FF7DFC30A68FE68FD46E1A06FBFE
+:107E50007B80335A4E58137D1F7F2DEF6F561CD3F6
+:107E60007373463BEDD066D451FF1A381F367F8BB3
+:107E7000BB18E2BCE38796560CBB6ABC34CCE2A5C7
+:107E8000CD2C5E3AAB4FEB4354899335BF7BF95908
+:107E9000FB8D844C7A9674DDF30B71483C2E8D7209
+:107EA00077E0CE890331FE85F5F9C35E7F3640DB8E
+:107EB0001FE1F7FEDF3B66681CE8873677BCC545E7
+:107EC000E5B9BC70F61A80E3DE313796C3F3921839
+:107ED00067CE6C167747BE282FF4DD07F386EF21B7
+:107EE000DEE1B7B1F897FF6D19E35FFEA2787FB4CA
+:107EF000FDED591C0F6B8631FFE58885C2591C8149
+:107F0000438C4F1D96875A697FEDABD387C339BC2D
+:107F10006D8525AB112F7CFC6D85FE5AA88BF1E990
+:107F2000748BE0F9B5C2B184C3B11ADAD27E7CE3B6
+:107F300028BFE9D68DD327C61BEAB74F4E269A3EF7
+:107F40000E7BFB00437DE6AC4CC3F777CF2D30BCF6
+:107F50009F12D33AB2EE3BF8C1B54E671CF8639F4F
+:107F600035FFE3A37BC0BF6B92F1776A16EEDFFEAD
+:107F700011FC6ED3793AE1640C86AA180FFBF20863
+:107F8000FB1D4EEAD729FA7D9D33A4F519D807D5F4
+:107F9000ED1744DD4F15FB058B5D2D98C7F7BFDD51
+:107FA000D7D9368CAF878B21B519ECD2871887AB20
+:107FB00071B0799DD9770C7FD702F20AAE503EBFDF
+:107FC000191AC2BD7A9DABF0F7C226F0DF139E00EE
+:107FD00097B0C3BA60E0030A9C6BAFA525D897722F
+:107FE000AAA712299FB41E2043F7405EAFDB897910
+:107FF000174B3B6FC338F791B840E103F4BBC56B37
+:108000002BB15ED3198FFDFE596E2DC7FCEDDF4BF2
+:10801000B89F3065C0BDAB017EF8FE413ADE94DF0B
+:10802000DD5C0178AAD9C3F233A6C8EF8F847E96AF
+:10803000345662FB29323922517F21B1F31EEC778D
+:108040000AD87A5A97473BD781FD956DA19C7F0747
+:10805000BD6273A25EA9ED8CC5769326303BFD36DA
+:10806000D71BD636065759E7347C2FE8DF3ACC6366
+:1080700038776F4D6D52E03E4F6B9B84DFDFD259F6
+:1080800080A598E7DB79BFC2DFA1B2A67E530EF9C7
+:10809000996FA7482E743F4C7AF742DD98441245F9
+:1080A0002F758DD3C9F29D633A59FE73EB70ED24A1
+:1080B000C8D7D4156D0AECEF1087DD05F89A3A762B
+:1080C000B83A5F274FF2C1BB6C4017EBA6F76C6064
+:1080D0009763683941F77EA9C8EF37E9E58E6116E5
+:1080E000EE3FAEC2F90A3B438EEC457EBC4F9C8FFF
+:1080F000E5F2F209FFBE0B4FC0EB40C75763703D7E
+:10810000757AB8FF0AC0DB5AC27EAF8628AD19B0B7
+:10811000AFF2AF829FD2D92EA1BFDFC67EFF77AC70
+:108120006A81FD02C52BEC0B935B318FFF017C0252
+:1081300054430080000000001F8B08000000000076
+:10814000000BC57D0B7854D5B5F03E73CEBC92992B
+:10815000C9E43D210F4E208420012643124208C964
+:10816000242408486080AA840699208F8804424409
+:108170001BAFF6CF842410042D8AB7372AD2019181
+:10818000A2D53620B6698B382168E3B5D7467BDBAC
+:10819000E2ADB5F151048B3580D72FB62A77ADB556
+:1081A000CFC9CC9924886DEFFDA37C27EBEC7DF63D
+:1081B00063ADB5D76BAFBDC37ABB184B60EC163B54
+:1081C000E33F8DF18C253176719A8E31F8F5572287
+:1081D0006BECCC866749499F3B8EB1EE7BA64F176F
+:1081E00065C6AEE04F0954711AA81EB30F7CCE725B
+:1081F00019DB7C3252BE4F60AC3216DE013CF0829D
+:10820000D17F309DDE33210E9FC68302946FB60D61
+:10821000647A2C8CCD79D11C6053A1DD17CD1283EB
+:108220007E3A72BDF1CE787C3FB15CB031E63E6102
+:108230009418D41B3BCD9DE0CC83364719AF3A9EB2
+:10824000F027633E3EBEF2593A96CFD81D26FED99E
+:10825000DC25822F2A8A316FFB7CC660AC3583CB4C
+:10826000189BCED8EAC14882BD7BF8FBCBF5897359
+:10827000198CFBF2BD306898C7EA7B8529C7615E1F
+:108280004CB63A27001E2A93576E6330CE4A5147A8
+:10829000F3AD9C1CED6F81AA1B07A3E9FB4A91F586
+:1082A0000A318CD50DA653FB9B0663E9FDE64133ED
+:1082B0003D570F4EA6F7C64191B9015E33283037BE
+:1082C000C037CCB1FA7430BE492E6F05E2A3B2E5D7
+:1082D000FA79D88F775B52AE17F0B1E8DE7EC90429
+:1082E000E3621683FD49E86F51418E639D2538EFA7
+:1082F00096EE2A1822B41BE731B8E1FD1A78CE09B0
+:10830000295F0BA8EDB42026EC731360DC8B5AD3E5
+:1083100075F7B160F90227CC07F1CD9AE9B948ADFC
+:108320003F0AFE6728F5575B021374D09EBEDEEC51
+:10833000DC06E3BA1427CF45BC34ECE4F86BD07B01
+:10834000E65861DC0D8F084EA00CBB35DF6A623049
+:10835000CFFC33F5066F76B0FFAAC1A94C063C2CC2
+:108360001BCCA067C914EF72C443CDE04D0A9DA693
+:10837000D293C9053A1CCF56A4AB8C032AE074569D
+:10838000C6F749FD8CC46F41FF9FFC524FE5796EE3
+:10839000DF2D381EBDDFE83C00E33967F68A48DF91
+:1083A00073A9CCBE1786784ECF7C76A0D7AD1D22A0
+:1083B000F341FB6BE0E985E7B968E68E76213E6123
+:1083C0009E59BCED2BF0EFBFA53D696C3CD0B7E1E9
+:1083D000776F4BE318BB2DB36F6A00DAAD2E0DC477
+:1083E000DF0CED5E38A477FAA0DF8DDD6FE4EBA043
+:1083F000FCC37477221381AE63BC0DC8CF1B96FA01
+:108400007FA807F8F6FB9FB3CD9483F8EC94021392
+:1084100024F8BE13F0E8837175EE16E7F9895E2C37
+:1084200072C994205FAB7C1CCEDF1B06C7137E2E67
+:10843000D71BA71C47FE057EC5F7750A9FDF8E7CFC
+:108440000F4F7DFF7C852F39DFABFC5C274165F842
+:10845000AECE12E5F7C17C2A7F04FC0728DF747CCE
+:1084600089A714F92E4B704E80C746659D548A0724
+:108470001F2844FEFF38CED902EF7FD2E400640506
+:10848000F9BF627009D58B1AFC26F5A7F2BF51E13E
+:10849000773DF27F08DFC3778CC177F7E5789F449B
+:1084A0003C95FDE06FCFFD17BC5A2005321F8BC3F2
+:1084B000A795F827B80E4CF627D3691DC8EB42F8EC
+:1084C000483C556590015FFA87DFA1756084E79CA1
+:1084D00090F24DC8D7D988997E69A935F8FE6927E9
+:1084E000977FD7CAFF1D0AFFCF33B2551E6C4FEAE4
+:1084F0004B0B6DEF7C4ED90B388F534E81B7F74F36
+:108500001A37E0C984F885F1BB915E8B0A64DD7D82
+:10851000E9D88FBA7E399F7CD5F87FE4BC3679FFE5
+:108520001B45DE87CB7706EDA17CFFF885497E945D
+:10853000FF6F33D00700FB4E44CA4F2AF29FF4432B
+:108540004494FF6AF27F5DEEADBF413C8D20FF7F1A
+:10855000FB8FC87F95AFD4F5A2AE0F753D84AF1FDA
+:10856000753DDCB0CB19F52DA41320E6495C3F9294
+:10857000EF199C479D1C9983EB525D479B8E0BB472
+:10858000CE86E90565DD04D789564F8CB64EEA9450
+:1085900075B1565917EA7AE8113BF716C277753963
+:1085A0005E634EC8BAD8782C5C2F8CCA570CF96A17
+:1085B0006D5C3D43BEAA8367285F1947590F969C9F
+:1085C000AFA70FFE7A8DFC3436C740EDFD2FF2D3F6
+:1085D000D89C91ED0919DFFFB3EC89CBF5BFCB95A2
+:1085E000613C977341CEA607F9ED865719B717C6B8
+:1085F0005B9DC83FBD117C9EBD86547F0BD6BBC220
+:10860000EA118FAAFE5F8B748F0DF269B5CB5B8E7A
+:108610007456E9DF1BE1CBDE927DED7436C6F519A9
+:10862000DCD948EF3E8DFEAF1B85CEF373BE9EDCDA
+:108630009B91736D745E91F34FB713D78E4457E6D9
+:10864000E6F640902EC66564BF0540A109A3D35548
+:10865000DFC1F1AEC26D0149D5B7B1A86F815FD658
+:10866000E5FC03F2A7720EFC3A06C11797BB8B809C
+:10867000EEDF5160D6B31CD7E14D056A79A0C32D5A
+:10868000A1DC81DF0BA9073733117E39ECEB3E53B8
+:108690000EF56FD83B54EEC3F28AA228A53DE6162C
+:1086A00058B07EDBD1936776D33CF6F0F5EBED97CF
+:1086B0003C5342E05C80AD21704118BC8FD7B74974
+:1086C000FDCC4EEDF8F97A85F60517E71F4F883D8A
+:1086D00002949C1B8DF6E471C17E1FD07F45D1C7EB
+:1086E00006A45770FEAF2C77A780BC3C2128F07FF2
+:1086F0009CC1F9AE38CEE11F1C7DBDC32729ED0119
+:108700009E372A68D6770A6E11DADD5820F8C7A599
+:108710000FC7F30F86F8561D07A860EDF7CC10F7CA
+:10872000F5BEC7F54DDF8FA3EF03C6AFD1FFCD4533
+:10873000CCEDB70CAFF773558E7E0EB0DA3EE0721B
+:1087400019CCCF9F3DBC7E8F52BF4FA753F075B65B
+:1087500003F9A7CFA0E2F34F0457300EFFC7D13F74
+:108760002DF771BE65EEB0F95F6DFC3FCAD1DA0B33
+:10877000F8236BBF0F5C0D7FCF0FC39FC23FB55A6D
+:108780007E8A923CA72F433B5171821DEDE24D1E24
+:10879000F36EB4FF83FC3140FCD1676643FCACE56B
+:1087A000FF8BCBCBB3C9FE51EA5FEE40F9E6D10DAA
+:1087B000D5E7EB41E52FF83E0BF8094D64FCFE834D
+:1087C000A3973A7CD9441F2A2758BACA7AE80C835F
+:1087D0008BC2D68FC2FFB47E51CE037E268C20671B
+:1087E0000C2E8EDF8F04B61CE5645F19B713FBC631
+:1087F000F167A64B20BCD95C1C8F09CAB32F220499
+:108800000F29413AC34F00FD909079139EAAE2D4FC
+:1088100079C7562DCC80EF6378B9EC8A7AC4971269
+:1088200084C3DB1BE78AAD42BC04DB8F7E13E552B9
+:108830009582B74C57CC9B0A5F09B82EEB884180D4
+:108840002F8E0B3E11FD04E48B11E6FD97E17CE5D4
+:108850000BFBDEADBFCAF79F0C5F97EEB0EF993E02
+:10886000F7EB7CAFD06D61185DE785D1B53C0CAE00
+:108870005661BF46FEA9727175D7836D09308FDBD3
+:108880008F08A86642F839BD0AD7E7ED76957FC70D
+:10889000BD89FC1AE4E7F184E7A59DAA3CCC78C425
+:1088A0000D745B82F2B030082F437941F0842AF7CF
+:1088B000B4507D91F908CACF9BDBD5FA13A9FE8A83
+:1088C00056B5BD2C82553A32DFA42AECBF2A57D1C7
+:1088D00017BEEBDEC4F20D27F8F755C726BFE9CB6C
+:1088E000B8CA7AD81386977D61B02FACFEC35FA15A
+:1088F0005F5AC3BEBF37AC7C7718DC1106B76BBFBD
+:10890000AF5923D03AAC017E40427CD5BABC4D5918
+:108910009743F480190816B2DB34EBEA86160EDFB3
+:1089200071ACA0AADD1202BB0A69DDA8EB42CFF848
+:108930008F318ED1BAD08F222F6B5CA3F06556B8E1
+:10894000BEE5E57FC45F93D00E661ABBA047D4C2D4
+:10895000DDA23AEE796F6ECDC6972A7C7D15FA07B7
+:1089600037FC9B765EE0AF2A704555794A885DE218
+:108970002BAF7287CC53AD3FF78B2B22F6B7D35575
+:108980005E7508DAAF2E0B4CA8877AD531FC097AD0
+:108990004D44BDB95989C7CC7D41F4A05EAB8E086A
+:1089A0004C68C80E9927EBCCC47976DF23127D7C06
+:1089B0002D401F8CAF317030C135EB8E8A6A3C0C74
+:1089C000F57BEE111B518FBEDD189B80E33FEBE280
+:1089D000FE424FD4D884B5007747AE32C850AF7B43
+:1089E00047053D4F89EEED03B0D6BE7F6C599565C6
+:1089F000129647117E9E702DAE6A06BE3EEC92E93D
+:108A00007B6F8C3DA10BEDE7FBF4EC4919C7E3DC70
+:108A10004F7C73BF3107FDE79AE6C909684FAEFE88
+:108A2000D7257393A0DEEA36BD53A07A6C2A8EDB7D
+:108A30007B5F8501CBD7B42A4FDFF5F47CF1CB27E0
+:108A40005A6C507FE071C17910EACFFEA4F3D5A92A
+:108A500000AF6F1FEF44D29C1CD4313BF4F36EC7C0
+:108A600044BF08FCF89EB9FEE545BC3EC3FAEB3FA7
+:108A7000975F5B948BF545FB36A87F16DEA33D7CA4
+:108A800076A77850C071D9AC11024CE9EC17F26BA3
+:108A900068D742B97D1BBC3FDB765B02DA596705BC
+:108AA000D926C0FC7B8ED55439805FD67718157ACD
+:108AB000D624D5C0FC6B7443FC42FA635D34877BDB
+:108AC0005C35554F227E1F9968433CCF9AEE3EEDB0
+:108AD000023C9972DD2FE1F33D33D7532F7E29AE4F
+:108AE000427BFCE717562760BCEE57CAFA3939B803
+:108AF0003A617588BDB3EE2389E8FEA241DE8AE3C0
+:108B00007C312255407F19E81EBB04D6EF1AC5FF01
+:108B100000FE6D7C6E04BBE76997487CDFBD2BBE11
+:108B200048D6F0713DC94FF21B00EE3FB6F1111F60
+:108B3000C8D7F78D8DEC3D5C7CF742C14C78F69838
+:108B4000297EA57FC6EC37A763FCD33D17F9993979
+:108B50003A33975A43D69D52FF0F3E2BD5FF03D48D
+:108B600047FFED0FBEDF5B9965B81DBFDE66F5A15F
+:108B700031F181D52A211DDE969ACEDE0DDFAD7B47
+:108B80005C4F727FDDE3F1F70EA0BC017EC1F858A7
+:108B9000F8BCA64CD713BE465D87BE6F6BD721FBD2
+:108BA00036C9EBD1D6E15F8FDD5B75C832FA3A5C2E
+:108BB000AFF829731FD77B701DADCFB34A0CF447B4
+:108BC000D9E32F3D89FCBE7E8BD9658481AF7FDCE4
+:108BD00048F4EAB75A7D7628F7DAAC52343C4DD3E4
+:108BE000397DAF9BCED7CD1C914926173D5B314EC9
+:108BF0007A09C6130BF0F9C6BDDF9D01FD7CC8FCE8
+:108C000037CD00FC5D4282015E2E1D17297EC824EF
+:108C1000B75409F2B19671B950F7CA738652F8B5D4
+:108C2000B67EFD42F4EB6EF3EBDFED577CB62BCA5C
+:108C300034519E6EE6AF40AF6ACB37B3DD17C5A99E
+:108C4000C4C6065C8F759D61E5F5D77F80F197CD31
+:108C50004C7AB75F8DD7C238E4E9D6B8B39100B883
+:108C6000980B30C42ED5EB33194C71BD05D615CCFD
+:108C700077CE3E81C6BDBE51F41BA1FE9C581EF7A7
+:108C80007DBF09E83F91E6EDB303BCFE61AE67D658
+:108C900033C16F825FAFDFB745C2F5D081F205E324
+:108CA000D402F3207FBF6776A6A1BFBEEE7133E189
+:108CB00077FDFEDB7EFB087CD7DF5C1917EA1FE738
+:108CC0002B7C01ED33534CB09D0F9ABF9D86FC3F2A
+:108CD000E77BE0E7C27CD747B31F56A523BD92D2FE
+:108CE000644BB0DEFA6DF764F27AE027C3BC6B76B2
+:108CF0008A340FF6BC91F41EAC7507C965059F6BED
+:108D00005A5F3118B2514EEFEE13A1FEBB008B1625
+:108D1000C2974FC1A301F1B50ABF4DE2DF38F2158A
+:108D2000BB5B2639E2C5F955EB84554B49AE0F18AC
+:108D3000685D4FE7F1CDAAE9DC9EAD4973DE427173
+:108D4000E4078C4E9453F823AAE300BFAA4ED7B78A
+:108D50000EE3B9ECC7468A8F6C6E35BBCD36F23B5D
+:108D6000DCC7707C12930C808F8D3297176B143E8A
+:108D7000DC2C2FB91EF906CACF48B8BF62E572B124
+:108D80002E1AF0CEED54B70EFAF9187F1BCFDB4D3B
+:108D90009A1AD2BFA0BC8776645BB0DD5E1D6BC73C
+:108DA000380BD69F3415F1187BD3721CDFB322AD7C
+:108DB0006798FC030568E73D2B4E47FFB66667CF13
+:108DC000DC0E848FE6D8B1C99A1FFE9AF4C6ED0A6C
+:108DD000FDFBD1DE473D02F051787E7B3AD7FB5E4A
+:108DE00091C77DBEADE049E503B5BC6EA79EC7DF68
+:108DF000DB8C64C7D435FF8EDAADB3F625A0FCADAD
+:108E00007B5E9F8F72DAA78C7B75736AD119E0AB9A
+:108E1000D5FA28BB00AF36FA2A0D086FDC23101CE8
+:108E2000FC2E3E0DF9F4CFAD3FB121FFBC670E4CD7
+:108E3000407D34B0C5EC3C881350E26E7F6E9D706F
+:108E400010E3336BEC7D5601CAD76C1D1F83F2FB18
+:108E50006D7BC080E56F77A6EB1076DBED4508BB38
+:108E6000A56904FF1944198F2B31F29F37099CCE55
+:108E70001B9FE9318C83FE9E54E6FBD1B3BFCE44E9
+:108E80007D5597D697897A05F8203319F1FCB440BF
+:108E9000FA78D333A2DB3C35C8079B900F60DD6DB9
+:108EA00050F860D3F19F7C0BD7C326A4BF6B381F4B
+:108EB000019F9EA6F7C70ECC65FCFBD3C827AA1E50
+:108EC00003B8558FF1348302433F081F9ECED7135A
+:108ED0009497F3725F36C953D66F40BB737397DEB6
+:108EE000D71FB2FF331A9D7B143AAE6E3692DCED7B
+:108EF00051E6DDBFF3791BD2F1A3677B5EC6FD921D
+:108F0000BA63A0ADE511D6858297CD88071BCD83C6
+:108F1000EC8BCD386F5B100F43FCAFACC7CD8CCF63
+:108F2000539DF76649C1835AAE7C7F5AE19B8D4CB5
+:108F3000C1DBF1897CFD29EB0DD733CA55757EDE87
+:108F400018FEBDCAA7E715BDF08632CF8DC017CE7B
+:108F50006CE21FB741951350F4D1D10314FF51E9CE
+:108F6000A58EFB6F417DE28E8E09D2B15FC76A3B51
+:108F700047889BBCABE0EF9DB6C4B42EC0DB9FC15D
+:108F8000CF427B0AF9550AE94FE51BB5BF393F5877
+:108F9000B200E70BED07B07DB5DFB77D9112B6F3F8
+:108FA00036E3EB03F913E5A7BA2EE7B4AC5C9063A4
+:108FB000C37A1F59C767E37CB95CFBDB743B3DDDBB
+:108FC000682FC0F7EE2E81E2CFEF287EFD3B6D3F8C
+:108FD000B1AD0EC1D367CAB8553EC31F8C4BA9E3D0
+:108FE000ED8DE1F1DCF071AB72481DF79C1D372F60
+:108FF000C0F7EAF8557E55F953C5A3CAA7ECDE7849
+:10900000B26BC2F995784DD5ABA246DE937EBC3EDD
+:10901000E5A2C16B19FE3E1C56EDA1F7304E83F25E
+:10902000E329D14FF2A3D5713A2344CFC38F2554FE
+:10903000EF346FB9DE5E8AFBAFCF084E347942F46D
+:10904000CB6E2944BFA876C12DB9E3B8BC8F739FFE
+:10905000473A6E3CD737D72607EDD0D99F04C428AE
+:109060008C4B1D4F7785EAD38D174E13FFD7B1BEBA
+:10907000EDE847D5ECFC75E50CE4F3A7F4B43F53F9
+:10908000D3566140BBFEB6276FCD473E7AB77D3CD5
+:10909000C9F5F387F2A6135F317BC24DC0FF6B0E9B
+:1090A000EDBD6905BC5FD3253A49BE433BB86E6B45
+:1090B000EE9CCE906FDE33F75716A2FD7EB7684761
+:1090C000FB7DD69379F762FD59D6B1D1380FF7A160
+:1090D0005882DD5214E907D5EE7D5B91932D7ACE4F
+:1090E00017F372F97A2A197A727E9BD3D29289FB8E
+:1090F000E90307403EE3BEB241EE0C607F2F2492AD
+:109100007FB119DC2107D0FD9CC0EDB25A03332595
+:10911000B9E8BD2909DEBFA2EFBB13F5C82B775A0A
+:10912000739A7100E2E7F9ABB93DCDF70F6379FFB0
+:109130002ADED4715CAFF41FDE9EFA7D2FFA11286F
+:109140004F95F19F6F7DEA26D483E78F4C88C179D4
+:109150007FF082B91DEDA90FF45C2E0EF9DB7EFDC8
+:10916000FBA1761AD8751A18EC380D0CFCFBBED68C
+:109170002EDCC6ED8B5CAD1DA7F27BF5960951A1E7
+:109180007904E1F63BCB08DFB79911C5469037EA81
+:10919000F34213200A1835156D7AF8BE3CF28BE7BE
+:1091A000FAD0DEDF63B41B619EEF23FFE3BED4F38E
+:1091B000A21FF761D036C7F5F0FED11C3FFA91EB44
+:1091C000DEF2CEC5F64F3FB883F20CD6827D9928E9
+:1091D00084D8CD0F3F7813B2FF25A7777B127C7719
+:1091E000E908CF8B80624B98BDFC7292FC8FDBCB81
+:1091F000D76A27ABF186ED88E7C9F0BB933911CF69
+:109200002A7E55BFE945E083025748BCAFA996ECDA
+:10921000E40B4D5E7A7E2CBCF3C02CE45F6B94F3C0
+:10922000207CF6F3AEBD6232D2F978CEE7E8F716CD
+:109230005AA2ECB86EFFD2D4489B8F179AEAE9A9DC
+:10924000D2598DB7CD3EDE4DDFFDA56BFA8959F0C1
+:10925000DD494B1497FFC3F67B383DC3F340EED88E
+:10926000322311DFABF3FAF06E4E5775DC1F1EB9D7
+:10927000D586F3EA7E2CF6C44CA46764941DEDBD3C
+:10928000F54AFEC7D90E6E4F9F33451D5E88792380
+:10929000FB96253090B36BBBBF7113BE5FF7826046
+:1092A000473FC0F9C2121BFA6B7F92FA6D767CC2FF
+:1092B00077011C8FE417511E15CE63B41F5518900B
+:1092C000989C4E5BBDC42F332F487ECC1BF933EEE8
+:1092D00053613CE4F3088A873065FF69ED4F791CE0
+:1092E00065C8BF55FCBB59CABCDFCD8DE1FCADBC28
+:1092F0009F53C0DF7FB0EFB945D8DEF9437A3B8E8C
+:10930000FB2F87F4D4FE06F0CB7430DE7347B8BF72
+:10931000B3A153203FF9FC11D0D730AFBA2D7AB7A3
+:10932000216A381FCE81F27E4B900F37B8FDC4DF23
+:109330004CE14713FC7765DC707E8C669DDB111F6A
+:10934000FF285F9E095BF743FC381A1F28F8C27597
+:109350008CFCA8D27B4307DF578FE9CC2945BE524E
+:10936000E9AFCA095F19CB42BDDA6260599887E359
+:10937000D34538717D2FB1C87A01F0B02CAEBF1C37
+:10938000C569451E9793E21C9D5B87FAA5C5487287
+:10939000205C8E5CCCE5765223F234FCB3E6713B64
+:1093A00042CFEAC90F519FA07752517F2F898CF984
+:1093B0006F19AA7C79FCDB2B2418FF925931778E28
+:1093C000778253F67CCB0A09F877C9F498E7C7018E
+:1093D0006CCADBC6CBA7C5E4E9016E6E6E5D510EAB
+:1093E000F0843CF7E7B9F1C17ED476E1FD157CFF4E
+:1093F000CC64AF2E2F1EE5BA85E4F4C7C2C0D4C634
+:10940000F460FDD705F6F6CF8520DCAF676968DF2D
+:1094100059B1ADF8D19F8BF2DC917979C3DFAF669A
+:10942000AC8DF2E77CBF3823703FCC63027A2D56B7
+:10943000F86AB5C912207FBE5D7F6188DEC847CE5D
+:109440002809E9BA48E1A3C552A01BBF9FC45AED41
+:10945000674D6442EDBB123BBAFC8685C7CEAAEDD0
+:1094600001BF7CAC87F9025F0BC09E8DB0640440E5
+:109470007235C82FE1C42F3EC3765B7CACDF4C74E1
+:10948000A8B6A3DC13985777059E7591B6A918372F
+:10949000A98B4CF323DF373CFFD16964AFDB54FB6E
+:1094A000C55B40FCBED5CEE7C3BC85C48F772AFC24
+:1094B000F84113ABCF80A5B7B8AFCF26C3A02F2CF0
+:1094C0000A64E27ABF9CE6CD453A7CB0AF25A5019F
+:1094D000F8E7A36346E742A87FCEFF1CC5E1362A22
+:1094E000F6283B14AFAC7B315002F57AD3271D44EC
+:1094F000FD529CC7F5F585F440DA3D2837D2B9FF17
+:1095000003F528CF6DDEB6EBE3B1DE85A33B32D6A3
+:1095100002FD8C12F35963E8C96C30EFF9D0760183
+:10952000C07A8045DACFF5537B58CF86FA5EBED538
+:10953000C1E3EDCC837245A5974A8761F48121A0F0
+:10954000BDAA33313D8E7F12DB67C7F5AAD2E9038E
+:1095500013E011E36726C023ACEF0A0C3AE4223E85
+:1095600079BCA541E86F8D45F85981F2E686EBC1DB
+:10957000270D88F2DA7DB792FC51E58E0CFF8D2421
+:1095800077BE76DC68DF9C11E5CEFA3C45EEE4B0B0
+:109590009C2BDC4024FAAE57BEAD10AB6509C71D4D
+:1095A0006F72623CADE1F1F1A46F58F67FB2D07AF0
+:1095B0006C5F2CD7ABE922E1FDB62E81F21B2BBBF1
+:1095C00092990C450BBB62E9691B4CA2F7E70FBFF0
+:1095D0009ACBE512A74BE5F713CB28AFE8FB13E9CD
+:1095E000A98EA341E1BB0A31BB3380768405C60155
+:1095F00070C32B5C6F35DC28525C93A1884E4062AF
+:10960000F21F8FA59DE23F1E3664DF0B57284E2BBD
+:1096100047215D3CBD2243FE016FC3C7F16C6A4622
+:109620003C1B1D3A268F607F18153A99E50826875E
+:10963000F81D926FD2778A301EFB0DBDD30FE52D3A
+:1096400066DB415C4FCCE7EE437F61B9F25D9F99E9
+:10965000F34764568CE6FB1DB6B9BDC86FCBDD5C25
+:10966000EF589D6334FD1BC58D7A6432E6E5F6A2A2
+:10967000CA0FC497D0EF628F40FAF5C6E5501ED2EC
+:10968000AEBEE822C9717D91D6CE347AB4F5BEAFB4
+:10969000D27F129B144AFF20DE2D6EB4D32FB9ADBA
+:1096A000C4C7A0DDFFAD08E09B7AF50CE76B8CE04A
+:1096B000F3BA8498C2B8A85BF463BC6407E201DE25
+:1096C000471568F119EDD6E22F769E161FF11EEDB3
+:1096D000FC13978FD3942779AFD39427D7BA3470DC
+:1096E0006A7DA1A6FED8C6320D9CEE5BA0A93FBE46
+:1096F0007DA9069EB06785A6FEC48ED59AF249FE66
+:109700000D9AF2C9471A34F094CE7FD1D49FD6B5C2
+:109710004D539E13B84F533EBDF7210D9CD7F7A86C
+:10972000A6FE8C330735E533FB9FD694CF3A774CB2
+:1097300003CF1EF899A67EC9E0290D5CCA5ED5D478
+:109740009F63FAB506AEB0FF5E53FF7AC77B9AF20D
+:10975000F9F29F35E537645DD6F26B04977F95CEBD
+:10976000BF69BE1353BC9FA23E60E20509F9B6650E
+:10977000A5C062319EDEBBCC847260308C0F3FCEC0
+:10978000B52B7E0D4B43795621160570DD5EEA122E
+:1097900068FD87EB3BE9CF1E37C6F3D84F0427C6D9
+:1097A000D9A2406D4921FD47BB4DE04806E1D8797B
+:1097B000760D1CEF7168EA272E9735E549DE2C4DB2
+:1097C0007972AD5303A7D61768EA8F6D746BE07496
+:1097D000DF3C4DFDF1ED1E0D3C61CF724DFD891D4D
+:1097E0005E4DF9247FADA67CF2917A0D3CA5B35174
+:1097F000537F5A974F539E1368D7944FEFDDA38141
+:10980000F3FA3A34F5679CF16BCA67F61FD194CF2F
+:109810003AD7A981670F7469EA970C063470297BDF
+:1098200045537F8EE9750D5C617F5353FF7AC73BCB
+:109830009AF2F9F2794DB96ADFDC907551FB5EB1AD
+:10984000772A9D9F69BEF795B919F287EF98E06C6A
+:1098500091417EE5F3F80BC8F57EB388F69187E277
+:1098600046319820087C1905420CF90A5D856A8A00
+:109870003FC551DC9754938CF93E60270010A34BF1
+:109880004F477B3A3268B7A55C997EED76DB1A6864
+:1098900013F97C6FBEB72A3F0FFD95A373D16EBF3E
+:1098A0008DF9B6E33840EF45F5C3FA78CDAC8D6756
+:1098B000A8CFF926C04B487FAF98F7A4B8AEE2F71F
+:1098C000CF375DA0FA43ED2A710E01E6D710D2FE24
+:1098D00003E0574860D7ED698275030EE3434D7688
+:1098E000821F6E7210FCDD26999E1D4D59F47CB4CA
+:1098F000C949E5FB9A0A08DEDFE426D8DF348F9EEB
+:10990000079B3CF4FE50D372820F831F8DCF23E060
+:1099100057E3F369F08FB1FC19F09711FE61938F53
+:109920009E9D4DEDF4FE58D31E828F377510FCE3DB
+:10993000263F3DBB9A8ED0F3674D9D547EA2A98BE6
+:10994000E0934D0182034DBD049F6AEA23F874D36E
+:1099500019825F6EEAA7676FD3397AFE7BD30095D1
+:10996000FFB26990E0568CD7023E1ECCE77E908A0B
+:10997000171566AC9CF841B50F17A19D8FCC51A06F
+:10998000FF8BC6CE0FB3B7C3E9F1A11217D69781EB
+:10999000B988F1C33199075B42FCACC795FE7644A8
+:1099A000309F19F8BD59C7FDDAE6184679D64CB193
+:1099B0005FD72B7CC9E2B8DDBA4E19D77A653DE492
+:1099C000217F66117FFEF2EBF815AADF9832C5FB06
+:1099D0002CF167AACE47FEB3C59F89F673C9146FF1
+:1099E000677E3CEE37AE7D99FAB33B69DFB1D218A2
+:1099F00088BF19E323AF8814CF1BADBFCD4AFEF853
+:109A0000A8E527CFA7A0BD3DEF4BD18B787A4D6F4E
+:109A10005D8EF1829E7C1E7FEEC9D7699E2F4DF12F
+:109A20009EC2F17C6AADBF4507E3FFB478CBE13B52
+:109A3000D283FEF4627449C10F5AC2643DE52732F5
+:109A4000F74BE9D0D48D6060217C33F3D1736EB6CF
+:109A5000F7556CA70A0C7184BD85C6B491E6153E16
+:109A6000AEDF2AF4FA6DBE4EF3BC3CC5FB1B3E2EA6
+:109A7000378DEBB599D767E2BCD471E54E9595BCAF
+:109A8000E481FD38BE4F5FB87856181FC4BFEAB7EF
+:109A90006F2F55F24AB6083C2EA7DA6B4A5E8AEA67
+:109AA0007754DF29F8D15E5F09FE0EEE2FBDA5D8F1
+:109AB0009F6F99B97EBE54AFCF42BBBE5A8870E249
+:109AC0003EDCA5FA3F5950DD427D86FB242D98737C
+:109AD00000E52D770B94CF5D0DEDE8A09D6A0C0499
+:109AE000E277F70AC47F13A7A6D3B8ABC1FC233F24
+:109AF0002B6E200DF74B815F2EE37C37CC147D0657
+:109B0000B0875FD3F93305DA975E6B10609CEBE3A7
+:109B1000804FC68DCE0F9B94F307EA7BE0B32FB046
+:109B2000BDBFFC744616C5F14FCE94116F2D3A7E21
+:109B30001EC9F7EFA293E7BB70512DCE9A42714A2E
+:109B400026399D1867AA54CEAF748BACF1E8087221
+:109B500074EC0CCE4FAF39F4F3FCD4AE76BF267163
+:109B600006A763E20C4EDFCA53AFA4E2F9AB4DBDCA
+:109B70007AB247586E7FB6C73AC27C1A77DD951124
+:109B8000C2DF9BBBDEE1F91AAC3F3B343FBD40E98D
+:109B90005FE527D160F51EB0848E6F88BFD3662045
+:109BA0001F45037F8F27FE3E8BF6F622A31C7533DD
+:109BB0003CFB014501787ABF67A77C2335EF680D30
+:109BC000F3D0733DB003F2B3C7F7A001F1BF8175C5
+:109BD000D2FB4D05B7A621BC990D943BD09F686F71
+:109BE0007EC901A35CB6E7C10A8CCF2EF5D7BC8431
+:109BF000CF258784B3E8BFC2FA983603E327427DB6
+:109C0000DB18E86FC533A56DC9F07E91C8E9C15E68
+:109C1000E5F400BE718B31C3E709EB61067EFF6995
+:109C2000B49BE621DAE669D643F536E616E282F918
+:109C3000F343EBA3E0F63F26A33F240DD0FEFBE663
+:109C400093C618A4F306C6F57730FEA1EA6D467CEC
+:109C50007E3B8B7062BD0F15BEFE3095115F7F2875
+:109C60008083E70ADA932CCDEB708D0FEADF0F7556
+:109C7000FE7CDB78D2CF8B10EF2F3B96C91837BB19
+:109C80003DCEE414B13CDA9FC6F75187E43CBB12E9
+:109C9000198C7B3DA0E771A8F07109052F7F86F62E
+:109CA00083D1C07CB8BF01EB9BE5E3BA1E63A0750E
+:109CB000D582A8C5F85999471EA9FD56A5DDDE2F06
+:109CC000B81FEC83F9E079C961FDD8957E22783F11
+:109CD000AA1EC1FE488E24304D7F9B31C905D78115
+:109CE000D54DE36FD64593DCF978AC7713D24B8D25
+:109CF000FFA8FE616FFA0719E4C77FDE9282763A09
+:109D0000F02FCF4B2CE6F2E935BDEC43F8B5D27419
+:109D10008AFFAB727771018F972D56E3634561F12E
+:109D2000B1B0B80C2B1A395EC698538FFD4E626FD6
+:109D3000A9F8A178CCA92289E8EE03BA63BCF9940A
+:109D4000E2A7964672FFFCF73362899F62E66710CE
+:109D5000BFD9625980F6A3AC22F15B0FCBB1C484AA
+:109D6000C889FB9438EB6EB08758487CFDBEDC0692
+:109D700013E61BECB0F0738CF79745D486E6BBFF77
+:109D80006EB69EF0797B71E92BC83FD9167F19A971
+:109D90006DB724E37C04657E93ED807F1D36ED5125
+:109DA000E2A54E138F4F9593DE56E97EAD7AFB699F
+:109DB000C9BF2D02E71FC7681D5A3BCC244FC54EB3
+:109DC000770053AF27152F3D4CF4943C59D84F776B
+:109DD0007E04B340FD4FBB0DE4E79FD4ADFE1EE60D
+:109DE000C50FBC6964B8FFD9694D96506F747E7118
+:109DF0005D393DADB3E6321EEF8CD481A0C8B1B35E
+:109E0000277E844453CE9F750AAC9751DCCD1DA9A3
+:109E1000035FAC53C72E97C0B88E595C7BA711EB7C
+:109E200079449CE77B45DE9F225EF2593DC1F71BDA
+:109E30003CB507A0DFFB634CC42FF714794EF071DB
+:109E4000B2B68530BEE23902C3F3BC6D066E9F59CF
+:109E50009D117C6F8A713BDF339849FDFF429197DA
+:109E6000AD0E771F1E1C19156F766960283E427C67
+:109E70009742713D158FA1F4B2E76BE8E5D587D223
+:109E8000AB00E83525945E6EE1EBD0CB8F4966F1EF
+:109E9000C3F9D457263F589ECBF51BA6CA85F36954
+:109EA000A971B605F35CBA6DA20EE9D61D919C8D21
+:109EB000F139954F55BE1D815FB7F4A0DC4891EC98
+:109EC000B86F6CAC8CA07D18957F55BEB514F2FCB4
+:109ED0002DE0DF5585F05C69F154A06C09E75F8CDB
+:109EE0009385F269F5A8FCCCECA1EB7811D815515B
+:109EF00031680F9D3BD419C2A7D5F517252E57AE53
+:109F00009444E407E37A8B8A04F66E28BDE1DFBB54
+:109F100059CAFCC81E92C80F53F17AADF8D77FA377
+:109F2000390BEDBBED786E11F0D52E38DD8918EFC9
+:109F3000AA7FE70E7CDFA69C1BF6651BB8DDA5ACEF
+:109F40001BB5BD49C5655105B82F30E342E43AA8B9
+:109F5000F769824E46E4B4C9AB7F44EBF04C24C3AE
+:109F6000EF6CB17DB54FD0BA9AC870DFF0D3DBBCCF
+:109F700063711F7F27D0E95D4AB2F627EA688FAB8D
+:109F80003F11D71520D7C19F5E077FCF94723FC185
+:109F900087668E53F2ACDD4AFD7EAABFD3B0C714EC
+:109FA00081FDA49BEC0743F8BF4489BB5716A8E783
+:109FB000755A64B4D72A0BB85DB3B7E9C8ECF72774
+:109FC000E0783A67BF0FE3895DE8675EE0EB882CD5
+:109FD0009F8CA921A62FE70878AE815DC73A311E74
+:109FE0008FEF9BA704DB7715F07567423B06E867A8
+:109FF000DAE69343E5A849277847CA83393C53E218
+:10A00000DF6D63546E3AF5089DF38FCD700A980F9B
+:10A010006DDAB687E13E8D39C0DFC765B885352179
+:10A02000EDC62D847187F005F0972F0AE48FE920A3
+:10A0300030662ED22182E292E1FD2E8A2FEB956CC2
+:10A04000A3F34938BF3185DF54BE51E74927564253
+:10A05000CEEB978FE376725BA3E100E5A116441384
+:10A060007E3F892B8B6223D89FEA733FF081CF8894
+:10A070007EB3899E07C1EFF64D44BFD941F061F030
+:10A08000BBF17904FC6E7C3E0D7E37963F037E3734
+:10A09000C23F04BF1BE14EF0BB113E067E37C2C774
+:10A0A000C1EF46F8C7E077E3B30BFC6E7CFE0CFC17
+:10A0B0006E2C3F017E37C22546E00F9C4F96CFB1F4
+:10A0C00014E8DA7EB7C18D7984FB15BAF6B8C7C536
+:10A0D0003A81FEE62C1DC5C4CDBF7C88E17CCC0E48
+:10A0E0001D9D0BDBEE7888DD8AFE6CBE95ECA9B673
+:10A0F00067B99D6296F632943BFB055F2D73C2FBF8
+:10A10000AE926ADCDFCB706C298B01785757C53E65
+:10A1100013AC8F4C79C9F2E61058B6BA361CB507A5
+:10A12000E1B1D90724F058D89E8279FBF048108E0F
+:10A1300003F3871FED5A50DD0C2C1418C7C8DE1826
+:10A14000483750DECE1AA417C6230A783CF106D64B
+:10A15000E2C0FDCCB132784502D50FB0B86BAFBFCD
+:10A16000BF40A6F7E1DF5DAD9E2EF79AEA31F12AF6
+:10A17000ED61B97095764CC232531F8C7D975E911C
+:10A1800053F1169253ED18DF01BCB79BF9F3BF678B
+:10A190002A7ECECCB25533E1B96A26A76BBBD9670C
+:10A1A0002FC3FEA7E8289F8135A6FF7A1CF477D736
+:10A1B000BF4B0CF34155FE7C5EE1830963AD742E09
+:10A1C0009FDD63A2FDFCEBC73EDB1A03F084279CF6
+:10A1D0004ECC7BD8C59C11C827BEDD3ACA7BFC415A
+:10A1E000EEF89825507D72DEF33128D763677279D7
+:10A1F000E357F2859ADBD68DC578D4A7AF7379780B
+:10A200005AE9E780BEAF9EE89967213B04284FF6E4
+:10A2100046B303880D3A5397C49F06BD7D05D633D8
+:10A2200080618079D9862F6698D0DF6B1934CEE3B0
+:10A2300079B37D648718CC5E7B34BCDFE3D3915C5B
+:10A2400068912D94E7B6CBE2EAC573CE3EBB8EF2A1
+:10A25000617765EB088FAD969BFC68E74B42732DE9
+:10A26000EA31BFFD98291DDEFBB37594DFE8772F37
+:10A270009D87B0CF2B51FE15FD60B93786CE77EFA5
+:10A280006203AF4EC3F26A6E87B525FCF55424C64F
+:10A29000BF6FB43BF9760B93313F8C52C574E877AE
+:10A2A000F76F8BC4715431C59FF591FF6A3372FA11
+:10A2B0007DA77BBE7D1CD91921FB5A468CD5394D13
+:10A2C0004E289F6A71CD43FF52B2BA4C98F7D76AB5
+:10A2D00077996A68FE3C5F8DF232A0DD16BB8EFC7A
+:10A2E0005C2CBF359BD4E1E98C7C25155FC6793F9A
+:10A2F000D48DF890D632962EE3F8245FE8BEA1699B
+:10A300007C51AF0CF3685F1743F3900427C16CAD29
+:10A3100044E31E2347D0B9E6BD86CA5EB417C7988A
+:10A320006EA7FDADA45A49B3FF94E8D5C2F1CBB5F1
+:10A33000702C9382FB57D0AF7DA61A7FD3E22D1CE1
+:10A340001F49F6D6D771FC495E3A04396CFC8FD8A8
+:10A350001F8E2E65384E0B8D33C1B2BA14EDA67820
+:10A36000E66946FEFB47C739D5BED4940EFD4F8D36
+:10A37000D39179348D0D6CC3767729FCDE9ECEE9BE
+:10A38000195C5722CD0BD6E53C5C97631B75E0B09A
+:10A3900005DB4FF781E3A6D93F88D1C013F68CD1F6
+:10A3A000D49FD8314E533EC97F9DA67CF2119706AB
+:10A3B0009ED259A8A93FADAB4C03E7041668EA4FFB
+:10A3C000EF5DAA81F3FA5668EACF38B35A533EB329
+:10A3D0007F83A67CD6B9060D3C7BE05F34F555FB48
+:10A3E0003E5C3F96CDFCFBEC7AA3638CE67E9B70D3
+:10A3F000BF21DCEE377DD9226F437EB619889F25B9
+:10A40000D4E7B8DF7C37F78F4CC54E19E54B81C2D6
+:10A410008F9F15BB1723DD4A6D26D20B9285D793EC
+:10A420002C73C95E49EB30D0BD3B929D0D9547A280
+:10A430007C6EF2CDCE98101CB7D9BE87EEAF28B592
+:10A44000CD63988FA47E2FD9DDCC6BC5FE64EACF97
+:10A4500064F7513DB30CDF87CCE3A44EC72C28C76B
+:10A46000C18F43FF6034BF4DF5D7543F6D34FF4C6F
+:10A47000F5CBD2742C029F0784FE3BD07FCFAE7FFA
+:10A48000BD2C9191FFB605E77D3F9EDB46BF6D2A4F
+:10A49000B7B3DA1216C818CF694FEFEC1D87E389FE
+:10A4A000D751BC14EC66E7D2107BF1B199DC0E9564
+:10A4B000C6B5F7A3FE6B8836C9682F49A603B3DF7C
+:10A4C000077CEDD7F73F85F18956C1BEB113E5E2B0
+:10A4D000DD16CA03D9ABE04DB6EAA66F83763B9B87
+:10A4E000DD129ECFEFDCC99CADB83EE24AB745C352
+:10A4F000FB0929353A0C034DCC68DE86CFFB67F2A9
+:10A500007D9F49D90774B1503E39B77439C6BD44EF
+:10A510003BF4779538B468EB60381F96219D45BEB3
+:10A5200042EBFE0A0CBD34C644FB9266A4B7404F12
+:10A53000C28379D0E237239CC1F162760BFE488159
+:10A54000DBAD9847571AD341F455ED59B473B1FDBB
+:10A550007B8ABC8F213EE3166AE92A990E113E766A
+:10A5600029FB12EDD1F22F513FB7A767C4E07E96C9
+:10A570003A4E55AE1C56EC7BF5BD2A571C986B9392
+:10A5800017B46F80CF3B30FE6696F6D0B94CF3BD62
+:10A590007B18F2B5194FB193BDEF933DA43F3C9AA0
+:10A5A0003CB4F271CB4DA8AF2FC7B9C89E3537FE6A
+:10A5B00098C6178E37733FCF471B0DAFB6CC4749B0
+:10A5C000BF830096F13CCFA9044B6D68DC537DBA84
+:10A5D0000BB8DDA257F386C093407D7659CD4B7200
+:10A5E00047F2F14573B82773058DEF8E7857E2D5A2
+:10A5F000EC6D33F89BDE10BAEF943C26C443DBE7E6
+:10A600004BE6D1BC255A0C6CD717D907289EACF85D
+:10A610004B6EC53EA9445F0C9E69067E8EC019B77D
+:10A6200090EE3353E3209766F2FC45A78F893C8E6A
+:10A630003794B7AEBB328DC62A1B54BD4BA62CD760
+:10A6400053F07F37E6AB8C6F97B479EE8A1E57F5DF
+:10A65000F4843DDAF2891D5A78927FD8F7FF897A1F
+:10A66000FE46FE3BE8016DF9A38ABEBE11F535EE4C
+:10A67000677D83E78B98604457B89E0DEA3D900351
+:10A68000A99D8152149B295B254D9EC998307D78E8
+:10A690004F914C78F0F44A7AD4B36A9C265C0E0B46
+:10A6A000F75CD882EBA534325246F989710CAF9130
+:10A6B000FBE55EF053EE979CBFAB46BFAA57A43CA8
+:10A6C0002A954EE174AD2D14147DEA110BC93FEEAD
+:10A6D0009F8EFE3AF6E70DE94F8DB79C2FF69A3123
+:10A6E000BEA1C65D2ECD935E12E4601C458D0BAC01
+:10A6F00052D6CF2EE71BF53D308E9E33468A8154CD
+:10A7000088BFEC6DC23CA95489E4977DC6C6EFA111
+:10A71000FF5DF67B28C778A22C27925DDEABA738B9
+:10A720004099C2C7658ABFA5C65BD20B399FA72ACD
+:10A730004FF82282FBF58108B45F271F01D9ABA532
+:10A7400067242FE771B6299DE1E56ECA5FBA4EE135
+:10A7500017CC3B2B4DC0742F0E773221D60E749C34
+:10A76000B6BCFF14BA0ED9AFBC14817C78D4CCED42
+:10A77000B5A7157E48608213F3F3138E589C7EA80C
+:10A780006715D9D13E9887F3B4A4C9339B7A420B9D
+:10A7900067B310381DC7A18577CBF5B8F5CC7657D0
+:10A7A000834D0E539E59A8E46567B24CE4AF0AD1BD
+:10A7B0009283FE5343A985215E8DEF4CFCB73E94F6
+:10A7C00017AFF37BABEC91F283E5F0BDFDD5586795
+:10A7D000B31CA4FFD3E047A37EF8EE15276BD50783
+:10A7E000E35ACF003D33687FD94EE59D4057848FB3
+:10A7F000815F9D41FBCB59F4FEC7E05723DC057E0A
+:10A80000353E7F067E35BE3F017E35C2B71797DEE7
+:10A8100084FCF216D443BE88C8396E1A8F716E8BD1
+:10A8200048E76EC2F97147FD7B969B4156153BC6C2
+:10A830002E8C477ED82AD2F9E49B0AC72EC4F3DBBC
+:10A84000A171B5D0386330AED62FA8713523D0E7CB
+:10A85000F20C59C95F50E26B5E1E5FFBEA76DC6A60
+:10A860003B14BF1CD6CE501CD3E47B3F0B8F6C092E
+:10A870002C0ADE7F74F77F1D463D9398E4ADC579C1
+:10A88000D7E5BD6BE076373F4F95A2ACA37D669EC2
+:10A890004F9AA2E40185C72F8BE7BC73473CA0EC1D
+:10A8A0009E9FCD5E89FE7FF1EDEF4C4F03F854E1A2
+:10A8B000532B31FFB7F8FBEF3C970C78CA9AB58160
+:10A8C000C37BDFB99CE2C43C8C875762FEAF2D96F8
+:10A8D000EBB77DCAB9A421BDA7AC97CD8D4F901E13
+:10A8E000073B83213E5A123CA45F3F8E1BB0D540EC
+:10A8F000FDCDF10309ABAFA20F36371EA6EFF70966
+:10A90000CE737E1CF74C13CF3B55F4CD2585775580
+:10A910007DD360E6A03A1ED0B0F47EAF120762EE9F
+:10A9200064FA2ED6CCE11E5B21E9A507CAE45FC913
+:10A930007CDF92FCE31EDB75DFC1BCBA967912EDB9
+:10A9400027EEB5B8CCA8B79E53E418B4EFA3FC9596
+:10A950000A13EDF3B0B8E5B4AE63D47EE2AA291FC2
+:10A96000214619CFE9C28800C6075ACA4D07518E41
+:10A970003E641947EDB514187C189751E16D853088
+:10A980001EC067B42D261D6155CEA9716386BB6AB2
+:10A99000D06E9932ED3235CFC1A4BF106A5F5B58DB
+:10A9A0001FF18F53278B681FBA67C9448FE9CCB951
+:10A9B0001CDF1B847A1F3223CE43173A0FB95C3B4E
+:10A9C0000FB942330FA1C11440BBB0A502E601F597
+:10A9D0004F5BF369BCE17453E7F3FD42CECFE1F383
+:10A9E00064CA7E927A7EA0CC5E741CC755A173B7F0
+:10A9F000E2B85EFAAC3A0E2F929CCBEA257C3F3E41
+:10AA000098CFD3FA75F2258ADF13F8FED7ED069AB0
+:10AA1000DF2BB3F9781E35F8D3E96087E44FC27DA8
+:10AA2000DFD1F8F84F0ABD837CEC66B8BE5A62DC11
+:10AA30009C8FED03B666E4E3E881846D34AFC08893
+:10AA4000F409E7E7707A0DE05D09E447FB44C4FFD1
+:10AA500057D157A56BF83E98CA2FEE597695DE0E62
+:10AA60009A67204DB34F082DC823ED8F6F87F6E40A
+:10AA700090FD3483C34376B63ECE9985F1E6962F9A
+:10AA8000C511CF4DCAB3F87A6FB64590FDDD62E3CC
+:10AA9000F677B76D81C66F2A073F0AF791C558D67A
+:10AAA00089EB4A8C5A41713431112D2F620BAD5D07
+:10AAB0001BB590DBB576D755CF4F49FDA2E65EB505
+:10AAC00061766DCC026ED7DA0C64D7EEB31A961F9E
+:10AAD0001841EE0C16723BBD1BE73182DF08FE22E7
+:10AAE000C533557FD160F792DFA7CE7350E177B5BC
+:10AAF000BED15ECF30BE261A9C32DAB1A272BE152C
+:10AB0000F39AB342EC02B5FFCBCAFECEDBC5FC3CE8
+:10AB1000849ADF5EFC2BA17E24BCE7CC52ED92919F
+:10AB2000F9EE1FE01B92132E8BC18D7687CBE2A02E
+:10AB30003CF0D1BEC32DEC73314139E3FC325F24CC
+:10AB40007D243929AFBF53DFFFDCAFD01F7CC94262
+:10AB50007AA7D39A52166A9783D14AF9C9E0FFFAC5
+:10AB6000B2A0B1A37F8315A90BFABDE087DD302B1E
+:10AB7000645FF254C359DA070AB757C3E30A43EBD9
+:10AB8000DD76389D8FC79F84EB5768284844BE0AFE
+:10AB90005FEFEA33D531FDBA3530AED4A41C7AAAC2
+:10ABA000EF1F67E2BC91EE4F5B3D4407AEA7274124
+:10ABB000675122E9E7D538EE8FB6BE91E094F19C5B
+:10ABC000ED45D2D397EA0BA27620BF67C5907C4DA6
+:10ABD00051CE8FA9E349B9AD3B3AC682797C039344
+:10ABE00030FFCDDFE4B9AE5C4F7E867BA4F13E3012
+:10ABF0004B89C305C6B2D0FB81E4B8BEF91301EF9F
+:10AC0000B245E794697DD949FFA972A0548A2EB74D
+:10AC1000039FA73631A745C6AB93ED14174BBD2252
+:10AC200012BFA5F6F0FB9DC7C60D0878FFD0503FB8
+:10AC30004A9E93BABFF2497D39ADCFD444C6FA28B3
+:10AC40007EE9A17D884FE2024B707D7FF2301F517B
+:10AC5000EA13DA72D0B914B75EB735C22F43D363A3
+:10AC6000EF85F1E178BE27B094741C474FFA0E8C43
+:10AC7000FBFC2492E23E624706C56D6E4BF2DE4558
+:10AC800078F5CB77E9C62B93857A75DF8AA0FB042C
+:10AC9000F6097DF3299FE24E1D7B7284B8D4BFCEA6
+:10ACA000E2EBFCBBB3F83A4B75E4737A3B72AF5BF3
+:10ACB000137BEDEBE914CA6D18C7AE283FEDD3A99D
+:10ACC0007961BBF523F3152BE27EEA903C56F067E1
+:10ACD000422F08F8451414BBEFC8D34F3F9DC0F86E
+:10ACE00011C3717C3F3274DF3822C34F85114E3758
+:10ACF000C91FC1EEE672D65EEFF0017FEFF8421C8D
+:10AD0000B1FFD715FA35A7DEE5C0FAE5B2939EDDAF
+:10AD1000A9F9676A007F168B811943E4B0CA27E15D
+:10AD20007ABEC13AEEAA7EBC01E4B17C953883417B
+:10AD3000C9FFDA7E6AA609EF0FDD6E71F5A1FDB5D8
+:10AD4000DD12E7A238BC05E446485CCA627999F88E
+:10AD5000D0E2E4F13A0BCA5F8C4BE1FCB371FC2FFB
+:10AD6000D3FCD57ACF2A72C8E20CD07EA9D9B98794
+:10AD7000EA99240F9D9F33C531CA6730D9F9BDA325
+:10AD800011193A661A411E1F9EC5FDC0EDD9AEBE0F
+:10AD9000321A9F84C7AAD87687CB41FA10F10CDF0C
+:10ADA000F758F3A342F1F39E220F5ABAF9FC3C8DF7
+:10ADB00049F6723C6753ECF9AF5979D8CE6A13DE85
+:10ADC00073275A73AFDACE8561ED3C92501E4BED7E
+:10ADD000BC87ED8856971DDBD12BF7A786E3F933A7
+:10ADE00085DE7F6F3C0D3048793C8417224C404310
+:10ADF00097F0A705E362B1237DC7E562BAE2BF80A1
+:10AE00005CD417C1BCEAB2DF7D99AF31EEB7C4CCD8
+:10AE1000E779429780B3F1DEAAF0FC8B703B46D510
+:10AE20003FAA3E8276446CE751B4632606D7911A56
+:10AE3000CF49AEF5F0F512E7217E01BB46C6F522FB
+:10AE40002A797EE1F3B9A188E35FB015C8A82FCABB
+:10AE50003FEF4FC6EF4E5ACF25733B56BBCF7CFA20
+:10AE6000B3C3662CFFA4B6ECAAF68ABAAF3CDA7E6E
+:10AE7000B2ED5F3EDC126AAF8CB6BFFC55FBCAA7D1
+:10AE80006C068ADFED17B4E7E32B8AB8FC7317A9C9
+:10AE90007119EF8C228C430A1E273FF0CCE3339FBD
+:10AEA000157B0B914E69ED06E603BA9EFC2CDFE1A3
+:10AEB0000D69E75AF1ACC6E1C728F6D418CB610199
+:10AEC000D7E9985ABF8071F4E4DA4EC17D957AB122
+:10AED000455C8FABF5F54AFB25D28088FAAAC4CE33
+:10AEE000F562F2A0C4B242E48EAD88AF5FBD62BF2E
+:10AEF000DB4E3D65C6F64EE93CED99A81F6C3AF96C
+:10AF0000C990F5AEBFCD652A0B995F0BEE0F8D4052
+:10AF1000C74D45AA1E0C90FE56F5AD5ED513719235
+:10AF2000464F6C8EE47CACDA3B9B0BB93FB4399254
+:10AF3000FBE5AF3ABCEB11FF1F177EB868BC8CE78E
+:10AF4000643B0DB89FFE55FB2443F68DCE5FA3FAFC
+:10AF500033C8FF4EC9FEF37EF83EE7FBA564EFE57C
+:10AF6000E18D23226ECD72FB0FECA93B8BE2F9D56C
+:10AF7000FCA1F46661F70B8E361F2FDE6B9A87F10A
+:10AF8000BF3E8ACFDEFFB930E27988AE22D52E1AD5
+:10AF9000DA0FD4C4599315FD96AC94CB18674DC7FE
+:10AFA000FD2D6D1C747AAF16CEEBD3C233CE84C5A3
+:10AFB000557DEEDFE0793FCC1FC046F7C13A4339FB
+:10AFC000B146D9F74CF1F94BF19C782AEBA4FDC5B9
+:10AFD000E4DA180D5E8B4525EF02AF3956C7093FFD
+:10AFE000C952E579FCFED921FAFB9826BFBF7CCD7A
+:10AFF0005D782526DBC3CFF999A073C4D7FAF94B46
+:10B000002B90AEC3E2B5F5DA386D726839E061DDD8
+:10B010003EED79418F3B87FC8165DFD09E1B54F369
+:10B02000D271BEC9AEE1FD7F75BFF02F6678FF6AB1
+:10B03000BB8F82FC21F9AADC279C8A45D88E14108C
+:10B04000709F7B4C3DA37B8593B732F748FB057F10
+:10B0500054F0158E67E62B21FCCD51DE8DB1F07CCE
+:10B06000D5315B75640F8E01B9407F6F6023C800D6
+:10B07000809337CA644F2EAED531D40FECF326CD72
+:10B08000F7305C8AA7AA747FD4C2F37153EB985F40
+:10B0900087F3A9BF8ED6138D6B5C901F005F9A7BE0
+:10B0A00005161768CFEBA6869DD355F92039ECBD60
+:10B0B000AFC8AE5917A0E7FE58447CC2F5DF04D4F0
+:10B0C0007F30A48F669E398CF975C5DB18BFD726F3
+:10B0D0003A82DF6B13DC8F10AF00BF9E32CDC942C6
+:10B0E0007B65973D4287790F27A3FB1F63D18C5D5A
+:10B0F0002C62BEF222BCEF7060B200F017275AF744
+:10B10000B7CF8672F3C00F30986CD9BDEB9679A992
+:10B1100041D8F6C0F70866054CC67B8130E714D7E6
+:10B120005D847DC111BCEF3A22DB42C1C908A6BDD6
+:10B130007FA7B550DE8D7923AD1374CA39E99072BB
+:10B1400098C786D9EAB97F37E5DFB1793C0F20B4DB
+:10B150007DCCCF1EB5FD05D07EEED768DFC4C79F7E
+:10B1600080AF40CF24E0F8310E8EED237D3168149E
+:10B17000DABFD29EC47C0770FF06FAB308BC3F3B1F
+:10B18000E6A524306D1EC2507F76E86FCAFFC17CF1
+:10B19000960FA787FE6AF458F1F5E8D1AA73D37821
+:10B1A0007D532DE407E13D56785F9D59E9CFACDC36
+:10B1B000DB85786DCD0FE215EC406A17AA375F5139
+:10B1C000F08C7986097603E17934BC9DB2F3BCA892
+:10B1D0009DF6087F73FAFF077A3938BD42FB437B3F
+:10B1E000F29AFB5B01FDC55D7B7F885F5C3F43F8A6
+:10B1F000059A6C4BB876FCC2A87CD782DF53D0AEE0
+:10B200002E04AFC1FCA347ECE81798F51E13E663C4
+:10B210007E6B7634C9EBECB8A526CA47885F4AF93D
+:10B22000C56DD916CA876FCBF886491FA2A7DBB2B6
+:10B23000ABA91CEA53DE54762002C3146C0AEBA3BC
+:10B2400038C0CEA27207FA85BE7A9E87A5E625A9E8
+:10B25000FA9029FB9F342FF8306AF6F18153507F22
+:10B26000677D2EE59D4545FF95F2AD76D53A9D5813
+:10B27000FE9899EF637E57D9C74246A578DAD4C2C3
+:10B2800027703FD735A141A0FDCB8D57DFBF745D3F
+:10B29000EC2BC3BC2D56C3F3B21CD552983ED4AE92
+:10B2A000DB5D88579E3FE517387E35ED3D3B3B9E85
+:10B2B000F0B633E320C3BF3BF41CB4256AD7970E26
+:10B2C000F398C2D7A36470D33D63AC4147E348C64B
+:10B2D000D4005071AE290B1D35F03E65AD44F7F931
+:10B2E0002666DF4BF94C60E593BD919DFDCB328422
+:10B2F00087CD738D761EE1F30A1FB77ACFB14A2F3F
+:10B30000D7456724FA57AE094B29DF8C7ED4F52E3A
+:10B3100086CD07EC61739C8EEE838BC8089917D39A
+:10B32000D453FCB77F2EFC18E82A5A47E1FB62FF92
+:10B330008F9F1B3232A7C940DFA9E76CF87EDB186C
+:10B340005C3B48F734C6F3BEC3BFCFE7DF3307DF4C
+:10B350007F334630139EB3113644501CD368041813
+:10B36000CFE128F78D3DAAC4DB9A052625B942FB1B
+:10B370000B50DEBC68BA2103FD8653A665763ADF22
+:10B38000A6F851FA680FE52DB2AC188D3F7A4A390C
+:10B39000A7D6705B7A22C6EFA2A0AC0FFD6AC9697E
+:10B3A000427AAB7113DBF8FE6FA21E3F3B5BBFCA54
+:10B3B000847A1B9DE042C62EBF70653FDE33ACAE83
+:10B3C0004FE320BFAF630896EA292FC43898A679C7
+:10B3D0001F50FC301576C749E5141F2A9609CFA5E2
+:10B3E000CCDE8ADF95027234F70328F77F0C6F3FBB
+:10B3F00045F33E00FE75E8BEC0E8ED476AEE193041
+:10B4000082BF3372FB9961EDDB476C3FD86EACA60F
+:10B41000DD3689CB0D5F5C847FA4F81EE6FF17C77D
+:10B420008F9EB79655ACE4DB9B40A2E13E94C23FB1
+:10B430003B1CF594C72646F07D533D8811E4A71EBA
+:10B440006B2DCFBF48D1E6B1A9F78BB4E1BD215038
+:10B450005E66D1DAEBA56CA0679A807EAAD65E2FD5
+:10B4600046498AFB532CDC8EAFA77D527D8A562E2F
+:10B47000F4E07A81F9E8ACB97D94F7166FA1BC8647
+:10B48000D1E20B6F3531CAC7D2477AEA51E7959EB0
+:10B490004C1ADB56007014E7B3C527A7AEC2B8D16B
+:10B4A0005B0A3FB7811CA073A40D8907C49076ABDB
+:10B4B0000D8109A857AA75FC1C00FD40FF6FC58FC0
+:10B4C000A1386B78BFEAFD312ABCB25E989D11327B
+:10B4D000BFB794F531D4DF1DC907D0AE1DEACF1830
+:10B4E000C8A3FE86F28A94FE12FEBEFEFEA0AC6FDA
+:10B4F000B5BF957769E7B7D2D047F35BA9DC5BAA04
+:10B50000F6F7079C5FFADFD19F920F36D4DFB7B40E
+:10B51000F35B69ECA3F9AD1CF22F95FE12FEBEFEA3
+:10B52000D47C07A3B1BE16F969B4BC0735DFA1D03E
+:10B5300091AAC97700CF6661A9C4D88302E78BEFCF
+:10B5400014CFFA1EF2C5E5850D4EB253147F8FCE8F
+:10B550000789743E88F4E8E2146E87A8ED1F692A13
+:10B5600060EE893C1E84CFAC2281CE1F4C2A10DCB9
+:10B57000B8CFB60FE407DE83B71FD63996FB9B1C06
+:10B58000F43CD824D3F310F8976E8A7F39090E144F
+:10B59000737FF1C1247BD51AB43F4A2378FE75D15D
+:10B5A0002CB06C83FE1BAC975366CC73BC89E5E072
+:10B5B00039B4CC0E8ECFB8F204BAF73E22E7745FEE
+:10B5C00013C03B0A4419F3CA77C823C7737E5ECC05
+:10B5D000E3443B94BC491F9E9724A502FE24CC7FE4
+:10B5E00095422A262EA4F3368BBF154DF64DF5371E
+:10B5F000FAAD7618C72D42CE6F32001F7F54EC9BF8
+:10B6000055690B481E84FBA771A8A972319F50F49D
+:10B61000FBE1D765D665E4DF2EBB91B118F87E312A
+:10B620007E077AEA578A7DF45ABF91A1FFE72BE79C
+:10B63000FBD7B7DCABF54B1F3407EC68173E98130C
+:10B64000C7901ED55BB5E53B0C7CBD2D0BF35317A6
+:10B6500087E5FDA8F720EEC05F6732D655ACDCFF6A
+:10B66000A2E4FDDC85721EE338293194E4AD9ED35B
+:10B67000341AD988FB926A7BBF53E4168B73131E6E
+:10B68000D43C39263E9383DFABFDA9DF3D2A3C93B2
+:10B6900074B5B829D88167FBB3B8BE477BFD3F8A34
+:10B6A000B5F94997178EFB4E391B896F07248C53C8
+:10B6B000A8E3FFDFE2D71DC57CBEBF9AF3492E3F4A
+:10B6C0006797C242CFD7A9F95FCB866089EE15563E
+:10B6D000F3FF9863201BE9FD9FB3239DF711FF291A
+:10B6E000F648E04DDD95C8AFDFDED0381CEE54CD16
+:10B6F000F955A5BDD1F03CDABD13F413921FD9D290
+:10B70000EC74D079BA78BECF3626AEEC3C9EDFC260
+:10B71000F27735FCA53DA7D5D2FD94807ECB63782A
+:10B72000BE4D1FEC17E3C06D166CD7CFE34A81A75F
+:10B7300028FE9B521B105AB383E781C2E562CA46BA
+:10B74000ED79B3F0FB142B2DFD922063BC7F80CEEE
+:10B7500031CE2FE1F4A23B3BB05E3CB727C5641D60
+:10B76000CF17192B73FB3263202D74BF636A899244
+:10B77000671AF9C65619446F46C943AB306FAA32EF
+:10B78000EA8DADE9288A4BF6AEC23CA9CAE4373E41
+:10B790004907793BA9E4610E4F7EE39371004F2E78
+:10B7A000F9570ECF6284A42925DF5D85FBAA534B90
+:10B7B00094FB95581F9DDB4E4CE27CF4F73E45A36D
+:10B7C0006EC47539A3448D5B323AA7ED39F18B33E2
+:10B7D00028A73C6A9CD7ADDDDF64CAFD8937A8EC99
+:10B7E0001567237B6901FE0EF8BC41B97747670AEC
+:10B7F000105E2706EF3579F8EBDCBB133C27CFEF63
+:10B80000116A69645EEDFD886E85FF79DE903A1EEF
+:10B81000B5FF61E3C2FB016342C7B58FDA51C7F5DB
+:10B82000718ED1274C0BEED7AAE3FA5818D88F4166
+:10B830008F033D7D3548D78FAD0369F8774E60990A
+:10B8400079098E1FD82F3843603DA7E3CA921F9114
+:10B850003D559CE45E5982F97B067E7F41BB624781
+:10B86000EE8AF7FAD0AF077EA3BC4D5F2A3FC750E0
+:10B870009EABFD7B6CEB4BB85DFA27E55961DC5361
+:10B88000FF7A2EDEA72EB066A8BFF9F3CB06F4FB35
+:10B890002B4FF0BFD7BAE9F83B06F4DF37210CEDA8
+:10B8A0006CDA6718F1EFC17D888709F8FAD5F82BB3
+:10B8B0002FA566B6C5C17836ADE1F76437FC34BA5A
+:10B8C00002E1861A9A255B5174B4023F5BE9E96E86
+:10B8D000C3E72AD6FF12EE4B5479B57EC4376BB559
+:10B8E00076FFCA7AADBDBE6A0F5007F4DAAAC6E485
+:10B8F000B0FBFCF83D81550A3DAB1CBBFBF0FE8163
+:10B900002A16764FA08FC791BEC967004F6D7CA4E1
+:10B9100012FFAE14CE63A34871DE9752B74B78FE88
+:10B920006D733DBF9FACA2EBA281CAA11EEE2B2579
+:10B930008CE1F7E1A9F253D5EFDF7CE1801EE3054E
+:10B94000E1F705AE5A3E8FEE055F2E6FE0FA7DEC13
+:10B950006F2B62E07DF83D80D55D5CBF57370A7E76
+:10B96000BC77F79BB55A7F6025EB6B437F6665BD5F
+:10B97000F6FDAA462D7CA444D1BF93D9645C1FCFA9
+:10B98000960812AD1705BE90FADBD702C83F499E54
+:10B990004EE4B78D86C054D473E5495E82D5727883
+:10B9A000BF89EB21AEFF75B09248FEEA79DCC25741
+:10B9B000C7EF67FBE6307B20C45E1087C3EFA9F2B8
+:10B9C000D3ECD94A7ED80B02FD7DF072C92DC58417
+:10B9D000F8C9E17CF8BE223F5F63FDD938AE4C6404
+:10B9E0003AA04BE632FEF79F335FACA1BCCACCE96C
+:10B9F000825347EB58C71AF15E3190172817D0FED3
+:10BA0000C4FB3232C5CEE524A7A719ECFCDE1D0726
+:10BA10000B5DFFEEA79880F9823874DAC74DE9A56F
+:10BA20007B371675ECBE88722E63BCDBF5208C6FFD
+:10BA30009772AFF6AE9F0A64CF6ECA7E99E4612218
+:10BA4000B005F6BBC9A1C8C52EED7D188928A7F0A1
+:10BA500000CBC26CEA3749DD7F50F37A036574BFCF
+:10BA600054A2D2EF971532FF7B7B1B3A059C772AB5
+:10BA7000F335631CEAD7280BE3834F759FE0C6E0DC
+:10BA80003EF97AA4679DA39FEE8751F7C947A8B7EF
+:10BA9000A5247E78BDD1E4EFFFF5F37F007E0B583F
+:10BAA000CA008000000000001F8B0800000000009A
+:10BAB000000BED5A7B7054559AFF4EF7ED4E7712FE
+:10BAC0004227813C0C819BD72C90109B8420E8EE70
+:10BAD00078BB3BC984D7D8E1310642A49909BB5150
+:10BAE00092741474A3656D1A616207DD2AA1D045B2
+:10BAF000CB3F1A4A5CA756778366B1D186ED80A109
+:10BB000050519B151D184B2AB0AC23C50089382E07
+:10BB1000CEB0C37EDF39F7D27D3B378A535356ED23
+:10BB2000EC26953A39F73CEE39DFFBFB7D171430F4
+:10BB3000C15C80071C002003D499AF650C5760FFDF
+:10BB400040492E607B9D7EEE1CDB9A6D26906DC079
+:10BB50007FAEE39FC5910AF2F4787FD1F46C5D7FEC
+:10BB600089B34037FFAE7925BAF146A55C37BEAC44
+:10BB7000A15AD75FE1BD4337FFEE268FAE9F92B744
+:10BB80005037DF2E2FD5F5D3A6AFD2CD9FE0FCA93D
+:10BB90006E1C26F5E7792700586D81611FD221C8F8
+:10BBA00000E665E1BED6F4209B08509E8193B14D1E
+:10BBB000ADB6A7531B9C9D126519D8DE925149FD65
+:10BBC00094B71FCC8BE236B6892FDB5CD8FE130B03
+:10BBD000B9B3710F2493AF1FE938F351504209F400
+:10BBE000FC3B8F09A026DECE517C77BAB0AD7849F8
+:10BBF0002E408EE04F6CA67716AE4FC57FE7E0DF94
+:10BC00003E5B684F11C0ADB827CC8FEF03F5AEF99E
+:10BC10000AAD7B54590093B01F064719CEDB6D0562
+:10BC200085FA817D56BEAE223C6C52D2E3EB86147F
+:10BC3000C6DFFBB4D7BD80F6EF8C3007E0BCCE9DED
+:10BC400067AD7205F50733146C2BBD67AD909EF898
+:10BC5000FC8C959E774A23A90E6CFFA5DFDC103281
+:10BC6000909307152BDFFF4821B6788E9607CDA15C
+:10BC7000143A3B288B5D286F4D20E4AD65EF48D426
+:10BC80008CEF6FE960CE003E6A92EF5B0C4857F094
+:10BC900059CE0E23C96DF87BBD18CF999FB11B6E8D
+:10BCA000E5EB017200D608D6C1AA79510BD1ABB928
+:10BCB0004DCCD7F8B96679FD795689FB76253D9F3D
+:10BCC000D23B6ACEA0F5D2D9614D1EF0DE3F53269D
+:10BCD0004CFA2C0D3BE55071BD04E0A4D76478AF5D
+:10BCE000CD1E0960328EFB3C9CDE4F23DDCC8CE800
+:10BCF000984C2741BF6FA3CF2BC4EB043E25CF0B3D
+:10BD00007A049F5E61D0D49F3E76FC5DE2239E67FD
+:10BD1000378B558119C0EF4DE572DA6C5BBBFE5C69
+:10BD200035D1FFAB5E46F4FF570629B8FF27836F76
+:10BD3000E7C824E77B877286713F7FFF500EA09C87
+:10BD4000B55BE44DD2242E07CE4DC897CE70949F9C
+:10BD5000BFA3BF7A909E778499D38E47F50F8CD678
+:10BD6000F37BC270AF239DDE6B7CAE6D8A899FEB47
+:10BD70007945E6E7F7FBF09D93687D4A28C488EF94
+:10BD8000C3562E17FB193C85FDDD7DB6A690C13E3E
+:10BD90007F4FF4C6F56FF55941423969C7F5748F85
+:10BDA000238547AC36929BBD782F46F738BE228D4F
+:10BDB000F6DF680199C5CF77B130769AEE7FAAD5C4
+:10BDC00002017CBEB9D5CCE97D6AA399EF635EF729
+:10BDD0009FBD05D85F89F29782473DDC7AE548012F
+:10BDE000EE7BAA0DFB785FCF3A0BD7BF95F7333EBA
+:10BDF0003F597E35797D4E95CF953EBDBC25CBEB29
+:10BE000018396DFB6E721A8ECB69E57533E77B5D71
+:10BE10002EC9CFC3E0DC43FA73EDB02517CF5BDC4E
+:10BE2000EB703E86FD59E6D0CF73C82E1C16E3B3E7
+:10BE3000DB7731615FE45574AF82A015B63292238F
+:10BE4000C1AF77895F93E96A232C8DF4558A1593E6
+:10BE50001DC2572BC4E7572DD0B4B7829E0BFB32BF
+:10BE6000EBF5BC5D5B13E4F611551E35BB576E0553
+:10BE7000DFDE749ADF7F4B23EEF30AAEA7E753D5DC
+:10BE8000FDCA4A46EA1BB1BDA0083BF8917A0EAD47
+:10BE9000FF0F1EB11FB4A396211D97D804DD17769E
+:10BEA0004757D33DE64EF17D42F66FF1D48FDB016B
+:10BEB000ED44B0F89D0A1F9D0F9C269AEF57E97E2E
+:10BEC00078FEAF9FDF80F7B5CF48E57C6D3CF46C22
+:10BED0008CF8DC592A01F1DD5E3627D767207F5ABE
+:10BEE000EBBF5A04BEEC78BF33325AAF18E8F57690
+:10BEF000F5BCB3ACE2FE104122E5737B2CCDAB8ADE
+:10BF0000CFD3EE0FF018BFA7BDEC05CEA70DF7C33A
+:10BF10006C333FF136BE4F73FB71B616F7B9DBA237
+:10BF200058D291CE1F4F6C5A7FAE0CE09D1E3491BB
+:10BF30007891633D36F0FD05C0FB3D0EDE8FF5E4E4
+:10BF4000F1FEBFF7C8BC9D31D5FB0705F759F15687
+:10BF50005719D1EB70E1335E37BEE7F2310BA7031F
+:10BF6000809BD369832A7B572266B0E1F89501163E
+:10BF700002163FFF3D570BC087F6E457F43E5CD8EE
+:10BF8000D1FD21B773CEB6D17A399DE4EA4C2FF5B5
+:10BF9000FDDDBFADA7B8E134FA09922F7F98411EAD
+:10BFA000EEB3FA6A365FDF113E6E95490E4C23F50B
+:10BFB00044FFC041062497FEAE516E3F9FC77B29C8
+:10BFC00078EE1FBA32F9FDFD91D926C1CF39224E44
+:10BFD00051F93F38F3771964BF6CDDF20777101F12
+:10BFE0008F9A391FB7BA47321C067C3989FB428ABF
+:10BFF000383FB5C9E34DD6409913D735A9729B3C5C
+:10C000007EBB4BC82552D8427102FD30A4DB6A5575
+:10C01000BE5AF02A13315E581D66D154D4DB96887F
+:10C02000E7BC446D1783B33A7B007056D367F3F8CF
+:10C03000F276B36D27ED5716EFAFF4E1A609714E16
+:10C04000735B1A39D184F707F83D520A4B737DDFD1
+:10C0500010DFF987315E437E75622024A3DC775CB4
+:10C060002DE7EDA5FD8FCBA427B6D49167C82FC0CF
+:10C070000F4C8E3DC8DF8E803EBE2953F5A0CC23E9
+:10C08000E8B6D4C5A4CFA673BB554EF7AECDF7AD79
+:10C0900070E1F3DF147E9C7188D4DB1AAD04E3E712
+:10C0A0009D80FED846FA84EF2D47FEBC6A70EE995B
+:10C0B0001EF72A8A9FA6C2535CBE01E59BE42AF9BB
+:10C0C0009EEB5CE25C9A3EAF3C74DE4AF1AE3F6CA4
+:10C0D000ACCF351ED73A3A4F1F4083919F2B57FD67
+:10C0E00073C74EC6E9E5DF99CDE97411767ADD288C
+:10C0F0009717F11CBB512E2F7BBD6999B8FEB2CFAB
+:10C100009B96951ED7FFCE9D697C5D5FE9D2ECB50D
+:10C11000D87F4495FB4B618F8DE87CCF4EA177DAB9
+:10C12000FB4E47576693FED45846AC4E1C9F1239BF
+:10C130009341715DCDFE65D9A47FE39DF33EB7B811
+:10C140007747F786F5E7B2853C98519FD6AB7ECC12
+:10C15000FF58D44AF45FDF0D5C7E07F77DD249FAC1
+:10C160007B2992E620BF77F1405A80ECFDE58329D8
+:10C1700021136ED54EF28EF6ECA265F8C73C7EDC3C
+:10C180006F7604709EFFE08567481FFDFB501B71B2
+:10C19000DFF591C747C9BFB547169C97A87DF9FB46
+:10C1A000D5878EEE87F87DB5FE851E9B4CF6F39203
+:10C1B00024ECC4FAF06B3C9E5D7FED4AA5B782EE9D
+:10C1C000F9FBB964CFFCFF76652ED931FF9B57E6AA
+:10C1D000D2B8FFF5B42EA3F8E4798F99D355F38F35
+:10C1E00045272425715E9DAA07455B9E6A2846FA6D
+:10C1F000D51C5FEE34CB09F25566F2D2FC9A8F6AF9
+:10C20000B3D725ACDB12931AE8F99CE3B569AD0905
+:10C210007279BBC7A2DA21D46AB43F2B551AAECCCF
+:10C220007B3266AEA4BE1450E308769DC7DB204B7C
+:10C23000C8E766FA0F55B12F26F17826D0660E951D
+:10C24000E17873CCA4D82B691CD725C41900DE452E
+:10C25000B388DFF74E766E95B9BF871EEA3F5C164E
+:10C26000227F0F01DB5069421CB432668AA6A0DC33
+:10C27000344552A2140FAD8C4967785F8D8F4E3BC9
+:10C280005EFD7931F0F8E85C629C83F1D0397DBCC9
+:10C290000413E8BC5ABCF431C55518CFB66C8C5A9F
+:10C2A000C85F619CA49BBFA6E947E7290F5BD3AD9C
+:10C2B0007F5E14934C4BF09E4568EE880C7DB11D5B
+:10C2C00036D20F2DCE247E0D18E8FB4FDD429F3570
+:10C2D0003DDA1233713E6C89B96DA5D836ABE303F4
+:10C2E0000E130470FF2D91657B186EB6E5DADD69DB
+:10C2F00044AF2D2796C263A4EF0EB7AD8CD65DFB7D
+:10C30000916D45455C3EC6D80FB7B08FF178C0D867
+:10C31000CF4D51DFFB7DF9BB3CF79F87BFC3BC7A94
+:10C320009A7B32CFAB9B293ED4F2EA643FA1D95F1E
+:10C330006DDFBB547A8FB5BFE779FC82F92FB7BFA9
+:10C3400077B9653E6F4AA4319BE7C5279667CBE96D
+:10C3500063F72F919CA6AC8AB1FB6BF19A3FA00CBE
+:10C36000D9288F51CC5C3FFDCB598851DFCB789CCD
+:10C37000ED5F6D09D1B8769ED872C6E7AD70B29008
+:10C380009DC5E33F2D3EBC313E07C78BE2F1A216AF
+:10C3900017C6BC8CE741CB150B1F9F31D557EFAEAD
+:10C3A000A1FBD9F9F39AF9625FB40343941FDDFD51
+:10C3B0001306DC0EA8F1A2269FC9F1E41791928919
+:10C3C000DF841B3DAFCAA5A65F5393F442F3538F9E
+:10C3D000B8047D3AC94F57939FFEDA4A7A305EDC43
+:10C3E0008D7E7A959BAF03BE7ECE4792D728EFBE57
+:10C3F000A8FAFFFB886FD84E89BDE5A2F316426C00
+:10C4000013E58BE3F9CF856A1C33DEF8232E91AF59
+:10C410007C9B1E3FADDEEFFBD2E36D6E71AEFFED98
+:10C420007A7C23FEB31ADF73A6C7F51CC96FAAB9BD
+:10C430002BE622BD7B17F54E1E3BEF2E2D9F944021
+:10C44000C79FA142AB89F21E7F9BC0018299F20770
+:10C450003C3F79DB0CB4CFFAABF93C4EBBEF6A261C
+:10C460006F83F920FCE883451CB7B9EFA5E31605F7
+:10C47000D7376F64B3090F6A6ED3DF273859E138B5
+:10C480005BE000E3F17230BFFF08E955604F894C73
+:10C49000FBB7D065090F69CB0C6D26FC82709C5BE5
+:10C4A000E9796A9C0EF89E0EF5F91D2ABE034971C2
+:10C4B000C09B83A738DEE31F6040FA6B8DA0FD2090
+:10C4C0007B7254E01D9D1161173EEFB6737BF2B98C
+:10C4D00024EEE1EF66A14D2C1E479C8F6CCB213DD5
+:10C4E0001B134F28184FE4C4E3898E173EE2F63041
+:10C4F000397EC81A10EFF1B79B4384C70C15CE657F
+:10C50000D4EFC07C3097E24459BEAB409C0B42DC78
+:10C51000AE283A9C64F72DC2EF7F71F43F781ED9A4
+:10C52000BC9F41368F3B9458694E3CEE58135CC813
+:10C53000FDBF1667AC997664A880F653E30C07FE3E
+:10C54000127E981C6774868F5B282F18134F24C5A2
+:10C55000119FB9F5B8E03449E0ACD322CC4178D290
+:10C5600034959EB7F5A5F2B8B8FED3D66CD2738DCC
+:10C570003F971A05BF2E9DFAD245EBE67E2A39C8B1
+:10C58000DEBE796AE38705A22FDB645AB7318DF2EC
+:10C59000904B9F3E9046F47C135B407D7DFDA464F0
+:10C5A000881F2E57ED11FAB7DF73FFF6A88A1B4BD1
+:10C5B000E8DF26C4F197E4751BD475414C3338EE9F
+:10C5C000B81FB8FC06F37D0B79FFD962D8C3711F81
+:10C5D00021AFAF45321D14EF95E365BBD14EFC731F
+:10C5E0002A6CB157913CFBDEE1FAF1AC89CB2FAE5E
+:10C5F0000F30EAEF95B9BF2BC7BFD538BFD28A67D6
+:10C60000A902F132D4B7992ADFF2310FFDCCC64529
+:10C6100068F975A453F994A35F131F2B5341A2FD2E
+:10C620009FB0F8B6CEC0254F0C4ACE4DB4467266C8
+:10C6300037E2BD9EB08BAD9ED88FF28AE742E9E625
+:10C64000E7EAAC387292D633D901AB717D675E7A76
+:10C6500094F033085B7E73432E510E18BDA752C869
+:10C660001BE5A30C14761DF9FB873A59D8859F78F2
+:10C6700081F2A0CDF3BA80F2CEDFD5811A07D902BC
+:10C68000E770FE0A5C31119FE7E6FB96505ED89199
+:10C69000376C1571C58895E28A55E47FB8BD15B829
+:10C6A0009D09E793BDDC3AFD552E6FCDF43C419FCB
+:10C6B0002111DF338FED3FEDD6F64B7EBF2CF2CE4E
+:10C6C000A4F7CFC9FC2287E72FFFFD5F19DC9F4548
+:10C6D000AE70BF73792405621CB71B163875C4C2CF
+:10C6E000F3F5CB98074D4EF067AFBB041D0E453CEC
+:10C6F0005C1E0762B56934FFB4FABCEFC4F2654B47
+:10C70000484E6292B38C9F52E4350331A946C40768
+:10C7100063E8F4D76E033AD952853D4F96CF1C5546
+:10C720003E733CE2DE9E53225FF16F14F50387AA4D
+:10C730006FFE2EC6EDCA91C21CA6E1C8B946F585AA
+:10C74000FD23DCCEB6DCCB9C0179FCFAC27635CF7A
+:10C7500048B6439DE1BD826FC9B86D433DB73B37D5
+:10C760008BDB0265C373E376FA7E8F6A5766091C1A
+:10C77000F7AADBC1EF9BD535DB950BF1FB1BD0F3A3
+:10C780008CC780EF06F3466A0DE86E306FB67273A1
+:10C79000F3FEE626E73D7893F39E566EEE1E176E87
+:10C7A00072DE4737F9DE5F18E92DFC1FAD8326D70F
+:10C7B0003993EBA2C9F5CE94B7D70568EC71F6E4CE
+:10C7C0004894A89BB1AF89A1CA4A992FD8484F165F
+:10C7D000CF177581BE5A5B68178BD747357A9DAAEC
+:10C7E00013F197A36234908D749EAAC46AB3519FCB
+:10C7F0002FCF079E3F5CB68BFA00488EFC46CE3F9B
+:10C8000047FE52B4FB41BB719DE94975BFF1EC098C
+:10C81000D4BB3E257D71505C6EC0C78D2A7EE70873
+:10C8200003C76D4092F397F2F7CAF9E46F26BE256D
+:10C830009E674441D9C5CF25172DE571B45C44E707
+:10C84000DBAED6BFB216FEA088F0BA2CF4BB541FE4
+:10C85000D94675129E0738F83CED7DADB5E27DDB1B
+:10C860002DC0A89E1598C1789C0AC31319C99F565C
+:10C87000DF3866899E5BCB787DE3AA07EFF79E29B8
+:10C880005AB1BB48F085E85B31E0E07597F7E7FF08
+:10C89000E3741F7F8FA8776C7088298729DFC073A6
+:10C8A0006C3850CDE5B7F9D0FC5FAEA6B8B054E215
+:10C8B000741E138FAB79D649354FD4F2AC61CA17C9
+:10C8C00013F28EF45AD378FE30DDC8DE6C67220F87
+:10C8D0000EBC27F2E06AABB3A42B814F79B5827FFF
+:10C8E0006BA3028FD5F2DB4A2564CA413A543F6CF0
+:10C8F0008EA6A0BFAEEE9D6525BB5DDD5B98CAF13F
+:10C90000A5D6BD268DDE467C2F56CFD9777484D729
+:10C91000275E4BAA53B6D65AF9F887AAFCB4D602BA
+:10C920006F3794499BC90D4FFC4B87D9081F6FC1C6
+:10C93000F89FCEB73628CEABD5435AA2B287DE7366
+:10C940006668A497DAAAB6220FC70FDB477BC97FB8
+:10C95000FAAF5D397227C703AC32C557C9FB5EA871
+:10C960001338E26B149010BD1648219A57BD40E26F
+:10C97000FCCE6AB1F37C3CCB02E674EA370A7F5600
+:10C98000D530C9437D589EC9FD71D55139735D4578
+:10C990003CDFCF5AB07132D1E9DBEA441A6E306322
+:10C9A000AAE2213E7ED73A51C7B11356BAF73DC32A
+:10C9B000FA3A9156F719AF4EA4D569FD0D5FEAEA30
+:10C9C000CA7E69A49EF095EA0367789DD81F668E9B
+:10C9D000BCA278FDC83F306AE5F455EB4638DF4A23
+:10C9E000EB067A44FD681FBE9FDA30DE57C173BC88
+:10C9F00081F7A53682F7A5E7077BA6F336DAE3E4ED
+:10CA0000EDA19E79BCAD46B1C9CFA2BAD328AF3B48
+:10CA1000DD5BCB248A53B5BA855697A8CDF7B613FC
+:10CA20009D12EA16BC9F5CB730A78A7CD47FD4E203
+:10CA3000DC8DCFFDC76CDCCEBA226BA7515CF6D57E
+:10CA400071DF3407AF0364F3BC5293874B8AD39EE4
+:10CA500049F980D769A77A41F5E079ABCCED4EB4BE
+:10CA600000F2087F8A5929EF273A283C9E73D9891A
+:10CA7000AEDF8AEF87FF1FDFFF2EF8FE485C2FB97D
+:10CA8000FDA8F29A945DD41E55ECEB12EC439F572F
+:10CA9000E0C47DA5C55CFF76788B335B13F1FC06A3
+:10CAA00091C7652D28B5273EAFA917787E1603AF2D
+:10CAB000911D7BA3D6345E1CF846AD615C645C17A7
+:10CAC000E86B107644C3FDC7D6099C6F9726E0FD3E
+:10CAD00097DE4339C5BC75707F0AF7E75F1D48D9FB
+:10CAE0004DF1775543EBB409D8AF3A990245C21FCF
+:10CAF000E9EA0BCD0D26C59E61544F500A4C28B76C
+:10CB000063EA060D266EDF6FD40D1AA433BCAFC6E0
+:10CB1000E9F78CFE7A421123FA87829467BCD6C16A
+:10CB20009C8330B68E801B17C03CBC45C3095E5742
+:10CB3000767631A72C7F7B7D2147C5193AC399664C
+:10CB400092F396B700E8BBADB17586061EEF57C1EC
+:10CB500053C15AFA1EABD4E4207F968C17909C9058
+:10CB6000FF4FC60947547F34A2FABB87D5F8BE4AA7
+:10CB70008D4BB475C9FCAF53FDD378B8634D9D8818
+:10CB800027B63454F511FF028B4D407E604B83DB9A
+:10CB9000569AB09FB94E7C47B39DEA169312EB1696
+:10CBA000A23E915CAFD0EC54F5E0D7F5C4FF1D1167
+:10CBB0008127F9F304BE597DD07594F43E7E4E7101
+:10CBC000BF1DC8E3188FA39C9920EE0536817B71A9
+:10CBD0009CA16AF19787D2887E5EF45764978E9500
+:10CBE0006E4E277BB258AA6132C7BB6FE0DF844F1D
+:10CBF0002DFBA06D2190FF5F31FB38D17DC56A0B05
+:10CC0000FF0E49F357CB3E68AA17E3BB1E4BA5F1B5
+:10CC1000E9CC6997E979839B9E2F7A394A481F2C82
+:10CC2000A1D3A1DEC48E9D93485F664CF595D4E1F7
+:10CC300079AB1B551C7CB5F0AF2B228D16481FEB32
+:10CC4000EF0E177EC5F3E82B916A8E6F6753FDB523
+:10CC500022EE2FAA0FA01F9AF0A7F34375750E4E70
+:10CC6000CF5BD10FD179B21A459D3099FF6695FF00
+:10CC7000E3F995F1EC28F911D33CA1372C2FEE7F85
+:10CC800065CAAF6F8BFB614718FBB9DF807BABF6E2
+:10CC900029739C38EC21557EC7FD7E23FCFDE0E026
+:10CCA0000FD4FD99E0E06A9EA3E1E15A5EF49E4A4A
+:10CCB00067AD7D5F6D93F1320D27CB5500BABF0193
+:10CCC00027CB251C2D8BCC7605C7EDF2D533DCC0E8
+:10CCD000CDA259A6EBE5384FC5ED34FC2CE79E7E7E
+:10CCE000467146210436917D19B2826BEF24FA6EAB
+:10CCF0008FC126D2EF50238F73869EFB55EF2FE80E
+:10CD00007BC301E620F7D3D17F9CFBE90E8C6B78C7
+:10CD10003C14B92070AA7EF1BD694798294638E8CD
+:10CD20006F55FF5CAB00B71B1DEA777DF50342AF83
+:10CD3000E338D14352224EE4976393B5EF0543C2E3
+:10CD40003F197ED7D70923FC7BC0CE36E68CE2F3B1
+:10CD500064DC28192F7A4AFD0E705CDC48F96EDF1E
+:10CD6000FBEDAB9B30E933025355FCF99447D88572
+:10CD7000261F63B4BFCDE46DE7DFFD1E640EA3EF95
+:10CD8000478FA972BF48C56F5FB40A7978F17616EC
+:10CD9000A2786E11089CF6C5836B397EFB62157311
+:10CDA0009AE89E2A5EBB50A5C78C385EBB83F0DA3A
+:10CDB0001FA33B219C7691CA7F80107F4FE3CED486
+:10CDC00028C51B4F58FAF3481FB5EF8D1EAD13FE53
+:10CDD0002E3505BA8CF4335CE77AB48ECF1B37BF9F
+:10CDE0003C596710EF14D58A7D4FD7E9BF2F4A8889
+:10CDF000D3CFD0BA84389DF793E3F43F155EFBB7E9
+:10CE0000E3E3C555C6F1DA98797B6E12B77BD68815
+:10CE10001E9B55FC2499BE4ABD6687A73838EE781C
+:10CE2000E3FC20EAB92AEE35A4FAB920937F79070A
+:10CE3000AF7F5978FD4BB333C10962FF89F5C2EF6B
+:10CE400068ED4C75FFA0C518A7A951E7FD305FC973
+:10CE5000A8C779E52FE971B359FD7ADCECD6709655
+:10CE6000AE3F3B7A8B6E7EF5D162DD784D6CA66E5F
+:10CE7000FCB69355BAFEFCE1DB75F3EFF8DCADEBE5
+:10CE8000FFD5881E37BBF3AA1E37D3E4DB8512918A
+:10CE9000B8CE63FB996E5E419BFE5E855DFA7B4D6D
+:10CEA000EBD6DF4BDBB728A0BF5F49507FBF2CC25A
+:10CEB000F52BFE785C7F6FADACE2FA25765AB7BDF4
+:10CEC000A1D44E714C6EBE90576DDEFF0085A782D7
+:10CED000721032000000000000000000000000009E
+:10CEE0001F8B080000000000000BE3146060F85185
+:10CEF0000FC1D3F9191836F323F8F4C0C7981918DD
+:10CF00008E83302303C33E20DE0AC46B80F83D03CA
+:10CF100003C352203D07882703711710BF048AD529
+:10CF2000B1623787858D81810D884F02CD3AC54C1E
+:10CF3000BCFD8A7C08F6215E0686B5407C9497BECF
+:10CF40006130D8F00C41FAD9F50C6AD76ED181F76F
+:10CF50003708B38A3330304A20F8FD12A8F26CE269
+:10CF60000876960C65769501F50300295128158001
+:10CF700003000000000000001F8B080000000000FC
+:10CF8000000BED7D09785445B670DDEE7B7B49BA28
+:10CF90003B9D9095257480202A4BCB1201113B219B
+:10CFA00089010306440928D26C2184249D01661E50
+:10CFB0003EFDFF6E0842C4D1898A1AFC195F83E0E6
+:10CFC00004079DE0A0139DC0348B8833E804C70597
+:10CFD00097795F401E204212A338E8F3C9AB73AAC9
+:10CFE0006EBAEB763769B7FFF97FFF840F8ABA55BF
+:10CFF000F7D4A9B3D5A953754F149D9124DD40C82A
+:10D0000025F8A1E5AB0A2124255876489DC3E58182
+:10D01000C1F6B55E1771190979C06BC272BD379D33
+:10D02000B8AEA0CF47EB8AFC1642EEF7DAF1F9E38F
+:10D03000DE122C1FF59662F988D78DFD1EF29663DD
+:10D04000F92B6F0D96F77A8BB0BDCEBB0AEB372A62
+:10D050000BD2605C425CA6AC64423C2F0F1CB981D1
+:10D06000D6D6678E4F9047D3FA5FF5449F45DF1BB6
+:10D070002D17F987D206B9A4286B74B09F8AE78D63
+:10D080004A5E5F80F3F8581DEB67AA792D3B72BFAB
+:10D090002C3286E2395646FC89A564727672C47ECB
+:10D0A0008301DE2343D93C89DDF9DAA0C8F0AE065E
+:10D0B000780F0DE5F825DB270F8A0CCF09FD7EE5FB
+:10D0C000E4F0D23B0F0F8CDC6F0CF4AB7372787D05
+:10D0D0007DA60191C71D0FFD62E013C589105F8B0E
+:10D0E000D19F9DF5FDF9455CF42FC5A763AF79EBA2
+:10D0F0000609F9370DE8B4D6BEFCCC163A4E7BCB08
+:10D1000030A7DE41C8672E6782DD1213DF6E81799A
+:10D11000C4C0B752182706BECD8D916F0BA05F0C0F
+:10D120007C5B02FD62E05B658C7CFBD94F846FF712
+:10D13000021EDF836F1B62D4B75FC5C8B78D31F2A3
+:10D140006D538CFAF6648C7C7B2A946FEA73B5DCA1
+:10D150004124B48B372A253BA09F27B3CD3620EB43
+:10D1600027C1BF3DDF53EFF6C7C8BF5763E4DF11E8
+:10D17000A04F0CFC3B1A23FFDE89917F1FC4A877C8
+:10D180006DB8CE58E4AFDA8610FCB93400FEB5D8DD
+:10D190004F5DCDEB7AC03B89908C7039504BCA51B2
+:10D1A000940799B8DBD9BA55F0CDA51C425698E83A
+:10D1B0007FE9FBBE3C12D0D3F17D36E2AF9584FE11
+:10D1C0009F039E84E47F732955E8EFD345EC4F74A9
+:10D1D000D0FE30C815E5FF66EF102CEBB91C6D2EA4
+:10D1E000D2A13CF8920D285F4F789DD8DEE01D8BD0
+:10D1F000E5635C2E3772397A00E4EE0A90C3522E52
+:10D20000574CEE0829719453BA76EC89271B1C28D9
+:10D21000576609F09499BCDDBBE7CAAD1B28FCCD6D
+:10D2200035BA2BB785C8D91345AA7C51C94C0EF61F
+:10D230007BA2FC846DC150A4B70DE03414EBD47E06
+:10D24000BED07E0DEEEE7EBDA0DF63C55CBE641277
+:10D25000081DF7B1D2EE7EE912A5CBBD12296DB241
+:10D2600084F3658AC4F4942A0AF243E6F4DD9F77D6
+:10D2700096B4D1F76DF6916984964F827EA2FE39FD
+:10D28000B054DFAFA77476537A641A494D13E04B5C
+:10D290005A2585E22B8F7524821C3D34CE45242BE4
+:10D2A00021FDA19D8EDF67741BC9A265E2F83622BD
+:10D2B0000D837EB49DD653787BC650DA4EE13C0494
+:10D2C000EDD6607B2A6F4F73F0F7AF63ED0F7B09EC
+:10D2D0008EAFF6BB8FF2D94DF15B47F1C5E7C5C400
+:10D2E000057494293BFD21F39F2DE971DE95BC5413
+:10D2F000F1BF2FFB54C6FCA1417CCD832F66CC0F20
+:10D30000C1EFBEC173B0AEE263BEA212EBFD57F532
+:10D31000A69E18D707124EE7D49903847687EC446B
+:10D320003FCD71444F7C945F0E2A9E91F8F3051512
+:10D33000E71F54FF5C8C1EDAF6BB3574589721D278
+:10D34000C1D05BA4C3BADE221D0C7D2E4F8729926B
+:10D3500003E147A3873AEE862BC571E3AE12C7DD22
+:10D360007095386EDCD53FCCB8EBFB89E31A33C53A
+:10D3700071D7678AE31AFB7FBF7189ECA40F99B953
+:10D38000200EF8679E60DF2E10F7C3A0DF60E7F481
+:10D39000C9413B27DB4B88DB12E42791E9CB39A15C
+:10D3A00070EE14EC2A85F37F381CD7E5E1D8357090
+:10D3B000E66AE16CE37048A89D0E8343EED0CEE3AD
+:10D3C000B7FCBD802E647CBABE92126BE87B4ECD5A
+:10D3D000F8B76BC7DF0D760CE6A1BBECF80E0D5D60
+:10D3E000E768F1D9C3E110DDE5E841EC1A38B3B5DF
+:10D3F000700E713801E9B2704AB5F3785DE5AB247F
+:10D40000AC5F941EC382EF75E4759E423FE845C54C
+:10D41000B19DB64B7FB2066EA0FD8F6C91FC465A53
+:10D420000FEC8DC7F5E3FCB6E958DF778D11D7898E
+:10D43000F3CEC97E23B527935E78DB06F6A5EA0511
+:10D44000BD0C75DDDE8F6D6D142F8FB1F5C1EBE86E
+:10D45000F3CE17F4642B4A63A10EE87E8ACB2659DB
+:10D46000C5EA656656ADDAB2EF4E805BDE6C2466C7
+:10D470000AA7EAA525D3AEA3F5258715025DAAB6AE
+:10D48000AF36F4A6F5A57EA909EA1D79A41CF469B6
+:10D49000CDDEFF6C87F5E8FC6E251BC63F4BD70938
+:10D4A00007B5C747ACADA933291E15FE5D85F05EF3
+:10D4B000C54EC9492D1CC577FBA10CC07787E43444
+:10D4C000527A2F6B8C270ED5DED1BFA776EB71FE7B
+:10D4D000CBE9FC0985B784D417023DAB803830BE58
+:10D4E000D3E8374B417D3BEB3D8CE3A9F5AA1D7496
+:10D4F0003CFA7EF5739213A65AAD236EC0B3FD2598
+:10D5000073E9531698E76AC3602BCC6FBD01FA2DFF
+:10D51000F1CF7FD1EC003CB7180A01DFCD5B0C6581
+:10D5200043817E645EC950C0EF2F227E0D7A17CCF6
+:10D5300077F935C6AD7AE0A72530688635DCCE9E12
+:10D54000A5EB952364FDAC20CCEE13D96F983E2C4F
+:10D55000F8FC257D22CAC1B2463D7184DA0D2E1F2A
+:10D56000BEA384F9317BACFEED59413E2EB77379F1
+:10D57000E57C5C9EC8F92A77E6CC18168ECF83C06E
+:10D580001723F38FA07C98AE9B0EF47F1C48BFC777
+:10D59000A8FFE440FFC889CF9FA07E12949BA99F5B
+:10D5A00004E593D44F82D24FFD24E8B795FA495051
+:10D5B0006EA37E123C7F9AFAE7503652FF1C9E3FC4
+:10D5C00043FD7228777A7DF8FC396F1D964DDE7A1F
+:10D5D0002C9FF73660B9DBEBC77E2F7A1BB16CF658
+:10D5E00036E1F397BDCD58B6780358EE053ED332F9
+:10D5F000E06DC572BFF7189607BD6DF8DE21EF1913
+:10D600002C7FC9E96E9B4072652A2F3617B1039BA8
+:10D61000928A5DB9E0AF2495B07AEA1DBE5C03AD95
+:10D62000A7BA699DD2B1776520D748EBBD6B587B0F
+:10D63000E63D24CF44EB993ED63EE097AE3C33AD79
+:10D640000FA867ED8337FBF2E2687DB09FB55FB549
+:10D650003390174FEB5735B1F6E12D649285D6879D
+:10D6600007587DE411D7242BAD8F6C65F59C0F7D99
+:10D67000936CB49ED3C6DE1F7F2E302981D6C77728
+:10D68000B2F6895F937C3BAD4F2412D6F32CB9F9E7
+:10D6900089B49E6767F5C2BEF3654784F57DAFD256
+:10D6A000B6104CDACF7539B932F513F61ADA56805E
+:10D6B000C95DAFBB21571E47E9A79045D0BE49576A
+:10D6C000C4EA06B212DA7FAB9B8EF5FD8A03DBF764
+:10D6D000E8E6B0BAC181ED7FD52DC4FA41C585ED2C
+:10D6E000C77595AC6E7061FB67BA9FE37887143796
+:10D6F000B62BFAFFCDEA0637B63F2CAFCFCDA7FD4C
+:10D700002BF56E8F8ECA75ADE42E2703415E9BD23A
+:10D71000C11EAEE37EEB2C9D03E57E5D8601F56CBC
+:10D72000EF7FE53C857A063FC9502F7B1AFC5E0AE5
+:10D730006715C251281C7DCF70267E33568033F189
+:10D740009B7215CE6A84638E0DCEDE6FC68BF87C1D
+:10D7500053A1C2D9A0A3F6BED61ADBBC265E9A207E
+:10D76000E273A95285F308E293181B3E01E55A01C2
+:10D770004E4059A2C2D98C705262C3C7651827C0E7
+:10D78000711996AA70B6239C8CD8E0040CD789F83E
+:10D790001896A9709E43FAF48B6D5E2EE3F5223E37
+:10D7A000C62A15CE1F109FACD8E0ECB78AF4D96F0B
+:10D7B000EDA64F00E164C736AF3C9B489F3C5B370A
+:10D7C0007D5E433857C60667BF4DA4CF7E5B377D6D
+:10D7D000DE4438C3629B575E82489FBC846EFA7CED
+:10D7E0008070AE890D9F8329227D0EA674D3E72415
+:10D7F000C219131B3EF9A9227DF253BBE9731EE146
+:10D800008C8B0DCEC154913E0753BBE9F305C2B9D1
+:10D810003EB679E5A789F4C94FEBA6CF258493EBF3
+:10D820006E447C0885638D0EE7503F913E87FA7504
+:10D83000D3C7A407380514CEC09EE114668AF42924
+:10D84000CCECA64FA21EF462726C700E658AF4399D
+:10D8500094D94D9FDE88CFD4D8E655D85FA44F61C8
+:10D860007F461F8FB173921DFCC644E2DC4A5F996C
+:10D8700094FCB383B0EE2816E204B047A4C036800F
+:10D880004FD756F44B65A7EA073909F8B9C536876B
+:10D8900013E2017AD5DF21ADB81FB1EC4C14E24D93
+:10D8A0002FE9F38603BE56EA1586FA3D0963E304C1
+:10D8B0007F2BD19524D47B15F516FAA7940C10DA9A
+:10D8C000D34AAF12DA33DC23857A9FF2F142FF7E2E
+:10D8D000357942BDFFAA2942FF2CDF0CA13EB06E74
+:10D8E0008ED03FBB7E81D07E454385D07EA57FB95B
+:10D8F00050BFBAF15F85FEC39AD608ED239A370868
+:10D90000EDD7041E16EAA30E3F21F41FD3BA5568C3
+:10D91000BFF6D83342FBB8B6E785FA75675E16FAEC
+:10D920005FDFB95FA8DF70F1CF42FF5CF237A13E45
+:10D93000C9F481D0BFC0FE91D07E63FA271A3F564A
+:10D940008C5FD4E612E6CF6618D09F0D580D58377D
+:10D95000EC35B3FD0DD493210E518C75C3FE858E2D
+:10D960006488070000EA4FE4F62EBF02E255BF18B4
+:10D97000EFBE02E2B8BF30B847D823F841EDB2FBA2
+:10D980001E3DC6135B25920EA54307659C9EC713DB
+:10D990008C4C7ED767E53CE50BD183BA7ED4BFA023
+:10D9A000F5F57A8AC798A0FEACEF57963E3F649C87
+:10D9B00075FD0CA55B87B2E70B2D305EC97D309EEF
+:10D9C000C7D03918F0D28E631C305618C794598EC0
+:10D9D000E36C84715282E31833CB35E3984AB7F293
+:10D9E000E77C9CC7406FA28DB37EC078713E9915CD
+:10D9F00038CE16CD38EB332B34E3C4B1F9D0E77C05
+:10DA00009CA72E378E71E004713EFD2B719CE7B40C
+:10DA1000F3E95FA919C782E3C0731887F4A5BB981F
+:10DA200034CA67636719CAC19FCC182733F4A9F8B1
+:10DA30000DD4C90766920DE338E8B8B41F199244B3
+:10DA4000859A907FD127217FBE88A3FC0F89A705E7
+:10DA5000F7E33EDCD72FE628123FC588EE93AAB93C
+:10DA60006C2EDA393D73858396CD07063D02E36C53
+:10DA7000B43AB369BDBD7992616104795A5CAF9CD7
+:10DA80006A0B91F3EEFD591E195243C75F116747A8
+:10DA90007CD4BA5A26E9C4E727E8BE8BD0FDC987F3
+:10DAA000749F42E87EE52385ED33FF9DEECFA0DE37
+:10DAB00046F767D04EC86A7CEF048F339FF8A5E421
+:10DAC000077A7F71D7CF145C277CE4ADF4548826A5
+:10DAD000B09F79ABE2291382F8CDF7F512EAD41C96
+:10DAE000F7D1A5E3BE16E3079D2F19FD5B81AE7547
+:10DAF0007D284D79BF0184BCBB77EA21C986D53E1C
+:10DB0000BAB184CCAC995E90865A24F55B4EF19CF8
+:10DB1000B1FB1A85BE41DA95B63B9D96205CE25278
+:10DB20004E007D4CF40FC0B9A588D643C6BFB5449E
+:10DB3000ACCF2272B04EF97D523F80B0F83F1FD774
+:10DB4000E15280AF25748E1994D5B3A01C09CD2C59
+:10DB50005E536A67EFAAF878162A2480FB6B5F0A87
+:10DB6000C4B1892F19FBCD51F7C91AFC4A1593ABE3
+:10DB700084D2B574BE1EE9AAC5F7FDBDF12EDD70D5
+:10DB80005AD63DA24068B627FC67BBC57652CEC6C2
+:10DB900053E9AACACB29CEDF13C07F5A9E06FE5393
+:10DBA000BC4F72FE07E598F1DF63744F03FE776E9A
+:10DBB000D213E417E7FB6D9CEF8BEB45BEDF06E766
+:10DBC00071B4FF6D2BB358BCA9A197C05F3A719196
+:10DBD0000EF50F1550B31A86FFDFB91CCCA9DBF583
+:10DBE0000AB0F7F672CDFC381FEEE47C98ABA1C703
+:10DBF0006D9C6F7339DF9610DFBD1918BFF02B10C5
+:10DC0000D79B5D2E11B0179EBB55BEB5097C73AB7B
+:10DC10007CD3E07B27E7DB9D7731BE69F16EE37C47
+:10DC20006B6BF84C2103C2F1D6E2396F95665E3E0C
+:10DC30002DDFEAB95CDA0DE04F4D77E5AE3819D249
+:10DC4000FF96A2C92B4E86D8855B4BA60BF559A52E
+:10DC5000B385FEB3DDF385F6DBCB970AED736B7E00
+:10DC600026D4E7ADBA4BE83FDFB75A685F58779FD5
+:10DC7000D0BEB8FE21A1BEA46193D07FA97F8BD076
+:10DC8000BEAC7187D05ED5B44BA87B9A5F12FAEB1D
+:10DC9000F65E7933C8D791B7F504E27D179CA731BA
+:10DCA000CE78C1A938A1CF49AF03E5F8947708969B
+:10DCB00067BC4E94F3B3DEB15856834C8E033B7B66
+:10DCC000C002F1534F1CB5FB89741D97C7ADA99BCA
+:10DCD00000EB0D6D1F4FC8BFCA37ACF1F5A55A0058
+:10DCE000716F4AFFE20603098C2254BA7B77CB732B
+:10DCF000A73EA4BDAD87F60699047A85B717B74548
+:10DD00007EDE21750ECE80B8EC7B46B23D24DE1857
+:10DD10007EDE42FA805F11ADFD9C8E94879EF76C8B
+:10DD200095D939CF117DDE5699E2556960FA5FF9D0
+:10DD30007C461EB1413D30B8C67299F19A283269CD
+:10DD4000C0E78182DE2F69B83AA8E704C661F6749D
+:10DD5000A97F94F07C59E375C27B6F48EE2D80C794
+:10DD6000B97D7A5CAF49E040E62DC3003FD7561934
+:10DD7000D6D1E614F4BB5ABDAE15271542DEF41613
+:10DD800061F996B704CB77BCA5581EF3BAB17CDF16
+:10DD90005B8EE587DE1A2CFFDDBB0ACB36AF0FCBDF
+:10DDA00013DE3A2C4F7AEBB13CE56DC0F28CD78F85
+:10DDB000E5596F2396E7BC4D58B67B9BB154ED6790
+:10DDC0004FF27786AFAF67410E8DE1727670EDBC92
+:10DDD00035757D837276582E433953E95BDC60E4F8
+:10DDE000F2902AC8C35F611D4E0179E9A1BD41E1EE
+:10DDF0007218EDFDC8ED206FBD7F047923640DCA54
+:10DE00008105E4EE7BC81B8153841490A73E1A79E8
+:10DE100012E550952355CFDF904ACE817CA97265DB
+:10DE200091993FA4CAD5FDE02746F0B77A2B125F3F
+:10DE3000FF987F4402B93A20D9727E5E417C2EACB5
+:10DE400077F1B16B29B856E827FB87C03AD235E4A1
+:10DE5000ABC110DFEF3A4685202BFAFCB4F2129DDD
+:10DE6000EE2EDC3F94F929F37B85B79BE3185DCD5B
+:10DE70003A524446C2F972CE3137E567DC9FAE1E96
+:10DE800009FB66FA5C264900C7EF9C1EE1BC800CCA
+:10DE90002248E79EE8ABF63FF5C47FE6C0B9BF0570
+:10DEA000F49CCE3DEE80BE86E9EF53CE5B42CE972A
+:10DEB0003C46673AC4C13BB30D76E63F4C12E94895
+:10DEC00026E1F9814AC703D95F0C86F399FBA81CA8
+:10DED000827E750D1A9C402E231F3DD9FB9EE8B90A
+:10DEE00000E61B133D0D04CEB9283DB7C27DC758CF
+:10DEF000E9D9939DECC93E9ED8C0E87C84FBA7D1AC
+:10DF0000E8AC9E8769F1B84591391FB81C933B3442
+:10DF1000F42F15E8DFD7EAC0FE07F77E9009E7780F
+:10DF20005DBBAF48204343DF2F60E73DDDEFE70BEC
+:10DF30007A20FDE9EF99B03F3EF8C2BB58AE254CC0
+:10DF40000F375A4AE62A6382F062BD47106D5E1EA3
+:10DF50004512E7D5837E76A4AAFAD99A09F2B49B32
+:10DF6000DB81B0F9F5209FEAFC0EC0FC289CA920BB
+:10DF7000D3741EF972C95DC2FC46A7E0BC7B9A9FB0
+:10DF800027C140A411143FABC14012A83C2AEEB5F2
+:10DF90000AEEEB9C6D3E8853EC8D77D65296786CEA
+:10DFA00067DF0838E03D319EB1ACD15C23FA4F8980
+:10DFB00035A2FF945113EA3F751D7ECAE6A6F82DDF
+:10DFC0004FD7D79CEC05EB9C8BAF736C5D55F1ABD9
+:10DFD0006ACAAAB10870C47A57BD54C4EEE13812B7
+:10DFE000664638EF53CBE5E9061CE76CE3C004183E
+:10DFF000F7ACD754C3D6577B0D1B37BD26747DAD08
+:10E000005C155F73725410BF68707F68FCA8449001
+:10E010008F4CB02ED2B681D1FB47E5A7FCB901CF1A
+:10E02000D55B942FC07F370F51FD7719EB2A5C4FDA
+:10E0300093DE671C01CF770AE3D1F71CEAD938BC1D
+:10E04000175D6E64724AE5A71ECEBB08DF1F98906D
+:10E05000CF6E0A3181C2EB902D7520577E85E9B3D2
+:10E0600087CB6995A9CDE07620B95B41AE178C5579
+:10E07000E5DC31EB036AA73FFE8B82F7CCC8D714EF
+:10E080007A4EF0AAC322526283A0EA82DDCB8A6173
+:10E09000DDFEF8C59BF83EBD3E07E67D9EE88AC0E2
+:10E0A0002E9D276FDA4685E8EB6985C5B1481DDBF3
+:10E0B000E7F8E81F98DFE27A71DFB3A441AC9791EB
+:10E0C00019A9606FCB362AC44F715F0AFB2675DE33
+:10E0D000D4FEBEABD811B925A4661DECD31F53588E
+:10E0E000BC67819DC87DA8BDAEFAC3AF7320EED3D7
+:10E0F000AE307F573D0F5F9AC4F6831533FD061788
+:10E10000EDFFD1EE51B7518B4BDFF7AF43FF673ACD
+:10E11000716E27E1745F5827E2D713FE5A7C553F92
+:10E1200028EC5C9EE391DC2845BC2FF535B773AA3B
+:10E130007E2419EC42DC274D5357E540E172E0574D
+:10E14000DC56430AE33BF051923B0DEE907E866035
+:10E15000BF24C398E8FD8CD04F8FFDD258BFCE426C
+:10E16000DC1F132A4F4383FDCC41787DD9B862BFB1
+:10E17000AA3F3CFBA28FCA4BC5EF1EB511BA6E7EFB
+:10E180002CD7A73AE9F3CAEDF7DA5CB43C23FB6C71
+:10E19000C0CF8FFDFA88F77D6F31A8F470592488BD
+:10E1A000A771F924753E8C537CB15DB1E33942A36C
+:10E1B0003160A4F259BD7B6931198EF5E3ACBEFE26
+:10E1C000533DD49B457E55FCE6D15407BB27C4E2A2
+:10E1D0004924807E6EF5B6FF2884F5C2433A51CEBD
+:10E1E000B4EFC1F8179350AFE71B12C2DBF16270B6
+:10E1F0002ABCCF7E3CBBEFFF546F8372F269D02301
+:10E200008F464ECAB9DF0AF482FD7EBEC19A8CF6F3
+:10E21000FE5A722DE8BB4A17E267FE6BED8EC78788
+:10E220001FA7789DDBF6179B3434D44E3079EB6A08
+:10E230005AF86F265D747BD24EE531D44FA280F13F
+:10E240003D4733F7BB5B5859A9046C701FA7728B0D
+:10E25000E2A492482A9FD513B89F40DE33FA213EAC
+:10E26000BAECD957DE194FE9BF6C97925CCCA66324
+:10E27000915283FCF1D0BFAB4606F951F1FB570C2C
+:10E280008E61ECF93D4941BE2CDBB5CF408685D38C
+:10E290007152D33E439B25027F9A8E17C27A5BBB95
+:10E2A000E31F06882B7EBC57226959E1EF976F79EF
+:10E2B00005D73DA013F293F3AB9B7F617C0B4C7BA6
+:10E2C0007934F6B3833DEC896FD9B09F4B41F97E29
+:10E2D000EE65B8C7F4BED10974287F6E850DE6736C
+:10E2E0005AAE6172FEEB7B5341DFCB155FAA1D4B2B
+:10E2F000F6BCFCC99FA3FC2D39FAF354F41F882BFC
+:10E300004387B6D99701F35CBCF9569C671971A392
+:10E310001C96FF5A5F02F74C2FC8A46857043DF9BA
+:10E320008B81ED5F4E6FA5CCA5F33C0DF8817D7B15
+:10E3300053EFDF8E71F39FE13DB89FF339D3951012
+:10E34000EB174C8C5F5B0C3A351E6A12E477DBFAF4
+:10E3500056E0D3D97EAE3438F7A074F071BA49973D
+:10E36000285CFDD18234C627E29073F87BD4DE4F5F
+:10E3700082E7D0BF557199870BEF71FBC8C65FC9A3
+:10E38000C7A778C7C1FA753A35B2FFF70F3E3FFA13
+:10E39000D34A42E42C44DF99FE6FBB8FE9BBAAFF4E
+:10E3A000FEE945D0FEF95B4C8FE03D582F285E8199
+:10E3B000346CDF375342FB40F7D991F47C9BC2F5B4
+:10E3C0005C6CA73B1C5CFF5539A1F8CB5242A8BC42
+:10E3D000D07192900FB83F2EDB48DF0FF1CB3C306D
+:10E3E0002EF633049F87AC1B4BB85D38A4B107648D
+:10E3F000734A4C7E74A5E27FFA09D0DFF78C4E9FFA
+:10E4000003F4572981F97FB2F3C03B73A89C7FD2F4
+:10E41000A4EAAD6857B57A5BFEFC1812496F3FB1AC
+:10E42000D07D5724BDA5CF23EAADA50DE5F9FF9614
+:10E430005D55E9D7AEA11FD8C7971DD1E9A8B58F03
+:10E440001B0C8E88F691FEBC4572C2E550953F5577
+:10E45000EE2A7E5BD51FEC50B77CAAF2D72D9FAA7F
+:10E46000FC69E72BD24FDBFE07D06F8AD7EDA64DB4
+:10E47000D3C07F3675128CC3E7CED4E33D4DD3E7CE
+:10E4800084DDD3B8231EEBB3F46DBF079FF083AADE
+:10E4900059C3609DBF9DF814766E5FAFA01FFBF55A
+:10E4A000A54B13E87CE670FADE4EC93D95F2A35405
+:10E4B00096027114CFD932F12524413C59222742CA
+:10E4C000F0B8BD5CACC3CFC4D4209C9EFA7F5BBFC8
+:10E4D000FBBB9647295F4F6413F2372871FF411D3C
+:10E4E000EB10799ADEC2CE313CA325FF00D4C336AF
+:10E4F000B924641FE13132FB7334FF963140BFDC35
+:10E5000059C312989C0FC6FDA287DBB12E9F230131
+:10E51000EC7B57CB40DC17761D5E687547B067070C
+:10E52000B89CBDC2CF613A2C52BD9ECA7D07E9445A
+:10E53000BFC66731478CCBCD31AA769AF38DFEE802
+:10E54000E9F8A55C0E67D357134686F06DE6D48FC5
+:10E55000655B381FE0E744C8BEE2FBD217E41AE867
+:10E560007BC0DC565812217E53C9E93771FF9706EC
+:10E5700058F7F25B7265A063BE452FC4431619B904
+:10E58000BE0E254301AF89FB973E3086CAB1E7B086
+:10E59000DE69A6F3F3B47C6A7047D8DF69E909F055
+:10E5A000C1BFDC6A64FEF2DB4AC962A0EBDBB7B232
+:10E5B000F3DEBF199C5591F04C37337F733629B980
+:10E5C000305AFAE9D1377796359047E9D16561F746
+:10E5D000B5C3E58FE97D975DF2AF96400EF5AC9E31
+:10E5E000CCEE371712F7031324D4F71B42ED576E06
+:10E5F000F3F467E13E4D758B64D7D1F66AB9CD006F
+:10E6000072EC69DE2583DF7E9383B8707F2DD70C93
+:10E610009B1912FFA2CB1ED2EBC05773E6027D3FBF
+:10E620009B692480976BE8A73658FF3F6B19857A62
+:10E63000106D5EAF7BC9B47C05E0307BA69587C2C8
+:10E64000E478A17EEB24D217CE81271ADB5638233B
+:10E65000F02FDFC4E42C66FB66FAFFCCBE4DA0F6BB
+:10E660008DC9B5126ADF2CA630FB9616C9BE2D5F88
+:10E67000ED4803B958BE67207EBFB5FCB5C52991EA
+:10E68000ECDBAB7CDFFB1ABF07DED197DAB71121D9
+:10E69000F6AD2FB56F11E2E45FC46ADF4CFF33FAC9
+:10E6A000F72AD8B708F3359B44FB56D4B21AED5B72
+:10E6B000515FBD705F8998A87D8BBF9C7D9BFFE8F3
+:10E6C000AD58579CF111E407E80AF6ED356EE760A6
+:10E6D0001CB0733798587C33563BD72F563BF73FC7
+:10E6E0004467D5CE2DEF27A1FF122E87CCCE2DCF9C
+:10E6F00062766EF91E66E79667333BA7B56F796160
+:10E70000F68DBD5F3D84BE8FFBC7ACC7EF80FB8439
+:10E71000A58AD344FB173BD4EF276AC684DABB1B18
+:10E720004C32D239CCDE393FC5EF607AB2777F0503
+:10E730007B978D766C10E891563EA60C8A17EEB347
+:10E74000BDFDE5A9DFFE0EF4E5753DDE177A57C77E
+:10E75000F6477BBF3C350AF4EE2113B3BF4B4C8C1C
+:10E760009FED5E1FDAD3494399BE57DDC3E857BD1D
+:10E770005B62F35DA9F73B601DF8EA22EE9FE7EECE
+:10E7800061FBE759C6D69478B897F42F0A61DF7D0C
+:10E7900090E2F921F2507AB102E380CFC7D9B6C234
+:10E7A000FEB2542626F063E71D9EF231F8AFF32E39
+:10E7B000D6A1DF3B0F9EC33909BF27A1DEA398D3A3
+:10E7C000BCEB953E24FC7EC44423E3C3C415927F76
+:10E7D0004B16DC4710DBE769FCFA757C9ED49F453D
+:10E7E000BA90BFEA23C6EFD669E9E164F3AF5AA94C
+:10E7F00017E9512345A407E568F1FCD4E0FCE7BE26
+:10E80000D0B6AE0FB42F95703FA5D2433B4F953E87
+:10E81000EA7E651ED7114FCB2E05F8A59DBF4ABFD6
+:10E82000B079ABF4D4CCBF4EB51F579361A06FEF56
+:10E83000EADC0F8C01F9F833A503C5EBB6D9D96929
+:10E84000A1F6F8416E97A6BA8FE7A73A806EECBBA7
+:10E85000C439E5BB5E49A5F3B9D9953512BE1FBED3
+:10E86000F52B831BE20B07CC9D68DF54F9FA84CBB0
+:10E870007B80C379BBB73D1FD79166C98E7A13D011
+:10E88000D82F7E7FCC730FD3AB03D23FD6F5198D33
+:10E890007485658014AAEB10F081FE776A0BE38320
+:10E8A00007F840FF3B8D741E023A57274BCE00F409
+:10E8B0006FDE752FC8CDAB66FA1CF4B75C72B2EF91
+:10E8C000CB882523F5B2F22947924F0C4EE404D7AA
+:10E8D000C579D02F29DCEF98686C7D1BF09848F53E
+:10E8E000610B09F74354BE0FA17F2E45BAF7D383BE
+:10E8F0001C7FCCE5F355A0B705E8DA69007FC613A5
+:10E9000060EB87DAEE911DF9481F95DECD747D1816
+:10E91000CDE8AD8B40CF9BD53AA7A7A74552E0FDE8
+:10E92000C974FFDA4B82D3AD2F0FA9720CDFC36914
+:10E93000E901F1808C10BD07FB147A3E59DD7C148F
+:10E94000E932652575AF42E80E76EB72F489A617B9
+:10E95000D5CD3F8C5E7CA2D18BBDE6CEBF8C80F83E
+:10E96000D71E09ED03694914F6FBF166E6671C3012
+:10E97000BB517E3B5F53F0FEB9D68E7CCDE51EF6D3
+:10E9800017A1DFFD4D8289809DB39BC9472A1E03D5
+:10E99000981C85DAEF57CD6EE45734F8717C1D8EE4
+:10E9A000E63FA9F51B613CB88FE810C70BF32F7841
+:10E9B000FCA7A779A5F171BFEBBCBACF3349AB81F6
+:10E9C000B0F8FF0A63C8B9D46DFC5CA03B4E16ECEE
+:10E9D00067375DA61FC45F0274DEAFEE7C0AE3BF3B
+:10E9E000E79F393E0DE477D91FF5C444F9DCBED367
+:10E9F0004A02ECDE8501D6D98ADDFA88E72884D47C
+:10EA0000B2EF1C7F6745FB52F1BCD15F4CDFAF78A2
+:10EA1000F1A3E110B76A5FC3EC8CEF192E1FBEB6ED
+:10EA2000E170BE5E21B373612DBCEBB8BC9C7B2949
+:10EA3000BE14ECA4D4C8BE5FAD689AA51843F6E92D
+:10EA400023CD0A8E4BFBE1BD65DF0E09E3E5E1F85E
+:10EA5000AD66F07630FB57D1ACF8E13BD88AC62DD5
+:10EA6000B8BFF5347E6A00BF6ED2EF9E65DFD73641
+:10EA7000EBC5F861A33E60C438A7FEB87138D35B1C
+:10EA800049884755A15E5637F13899267EB4EC7710
+:10EA90007B5EF451D22CFBFD6F6C606FCEB66EB70F
+:10EAA000617CAE91C5DF648B1C393ED7535CAEE907
+:10EAB0003E1E979B7A9A0C0F8FCB9D85FF503D9CF5
+:10EAC0006FE6FAAAC6351B7BC5747EBEECD90B4F28
+:10EAD000C279D2B9E73F7912F0AFFCE6B327EF86EF
+:10EAE0007389BD663BAC7F9E67DEC6F8BBFADEDD90
+:10EAF0005CCEDB77FCE6E927A81EB6BF67C47B5B6C
+:10EB0000ED7B4E67C2F78CEDBBBE4C85F8E6CA3D87
+:10EB100005B89F59F9C2A4B4CBDD3F01F9F4C77021
+:10EB20007EA2E5C781DD7A02DF739E3F6644FFA3C4
+:10EB30003BCEDA54C5E2D70E1E5FDD19F9BC4A8D13
+:10EB40000756EFBEE5E6EB611DDCAD381DF89CC74E
+:10EB5000077B8AABBE45F93A2206FEEDE4F1F3A647
+:10EB6000A911E3AAE7E13F944F9BCC625CF5C2EEAA
+:10EB7000C5FFF604B4EDEE1535AE1A88816EEA795C
+:10EB80005899D9B5CD0CFAF1FC6F318E0D7CA33EAE
+:10EB900039697FF64226C423CE289D77E23DE53DC4
+:10EBA00046BC6754B1E75DD497F6178EE23913E19E
+:10EBB000E751EDA4FB879D1BF0BD8E679B95C56358
+:10EBC00039FD215EEBB0E1731E976572ACC66BA395
+:10EBD000C569DF37B3FB50EAF95CD5B60F0C4413B7
+:10EBE000FF96C602BF8E0BE78AEABCB5F0EC408701
+:10EBF0006B43CF1FA2C5C3B95D0DE3173B7768DF39
+:10EC0000C2CF23BACF1908E93B12CEC7D9B9B9C7C9
+:10EC10002FBD1B89BFEAF9C3DB5AFDF4C776EED0DE
+:10EC200033DEDF8D2EAF9AD9FE56A5CFB9AF23DBE9
+:10EC3000E94EAEEF749DE930E3B9315B67E6F175FB
+:10EC4000A69AD28D7DF7C6F03DC7F781E79ED1FB2E
+:10EC500061BFBCAEE900DA5BAD9E571316FFD28EE2
+:10EC600027C531FFA0BA79DF70B047E7F6BF84F25D
+:10EC700057BDF3B8C147E11C6AFCBDA16D6850DE09
+:10EC8000C18EFB43ECF8B9E7F60D67E72291F3B4C8
+:10EC9000D8387C4F8B08DFB3F35301FE325F93C14A
+:10ECA0006EE9799CB3B26B16CCF76CAB42E03EFBDD
+:10ECB000D9267D913FC2B89FC13A362648A77556DE
+:10ECC000F61D9F3EC9807EE64AEBD863F0FDF84A08
+:10ECD000ABC101FBEDDAD5EC5E65EDFF72A6035F1B
+:10ECE0006A136FC373A37A0D1DEDC9F65CD887DB79
+:10ECF000F34B46835869ED41A24B27E0BDD25A94AD
+:10ED0000E6B0405E2FE6A710D989DF19EA6D854588
+:10ED1000300FBD5D6737475C5F193CC5C2F266289E
+:10ED200076F1BBBFEF900783403E8E6F9D07A353E4
+:10ED30009307A3FCC6FFD7F260F8609C9F401E8C2F
+:10ED400000C677D43C18C93F721E0C882F8D0EC99F
+:10ED500083D1A9C983C1F9F8CF3C18FFCC8301A5A1
+:10ED60009A07E39D0D650590A742CD83716683A741
+:10ED700000F252A87930BEDAB08AD5791E0CCBFDEC
+:10ED8000AB0B42F36064DEBF01DBD53C18CEFB1F4A
+:10ED90002908CD839177FFE682D03C1833EFDF5E00
+:10EDA000109A07A3ECFEE70A843C186BFF50007929
+:10EDB000305E8F77B7C6A544CF83D11CE788290F73
+:10EDC0000685F31EC2899207430B275A1E0C0AE7D9
+:10EDD00044DC98E87930C2F089920783C2F904E1F3
+:10EDE00044C98311864F943C1814CEE738AF287974
+:10EDF00030B470A2E5C1A070FE0BE144C983A185C7
+:10EE0000132D0F068563884F899E07230C9F287951
+:10EE100030289C048413250F46183E51F260503868
+:10EE2000E908274A1E0C2D9C687930289C2C8413F5
+:10EE3000250F86164EB43C1814CE55F163A2E7C1D7
+:10EE400008C3274A1E0C0A6714E213250F46183E12
+:10EE500051F260503813104E943C185A38D1F26079
+:10EE600050380538AF287930B470A2E5C1A070A63B
+:10EE7000213E51F26084E113250F0685330BF189A1
+:10EE80009207230C9F287930281C37E213250F8620
+:10EE9000164EB43C1814CE528413250F86164EB469
+:10EEA0003C1814CE728413250F46183E51F2605060
+:10EEB0003877239C287930C2F0F9AE7930CC814183
+:10EEC000D240CC8381F938BBF360247FEB3C18BF80
+:10EED000027CFF9907E39F79307E8C3C18B75ADD9E
+:10EEE0007F8FC77DE377CB8371265E9337A2873C04
+:10EEF00018B75A4BCE823C7FDB3C1817E2BF5D1E31
+:10EF00000C3ACE3F2E374EB43C183ACBB7CB8341A8
+:10EF1000C7912D632E339F287930122C62FE901FEB
+:10EF20002B0FC6B1F8249C4FB43C183FB97C137426
+:10EF30009B05FBB4E9288AE427937F62B485C70D5B
+:10EF40007FA8FC1330E99C9F52FE09358F41930244
+:10EF5000EBE1FB9CEFEF70B9F880E7A13816350FB5
+:10EF6000857F2AC677978A7928A6703ECE768BF25F
+:10EF70003085B0739429F959FE5AD8AF976BF25087
+:10EF80000C11CFE98BDD47F3293832D529CEE328A0
+:10EF9000978769A59F1E04F6DC3C36721E8A199C71
+:10EFA0001FD3357499C2F9369D97B7C3A739549EBC
+:10EFB0008BCB8FCA40D7698E3619E3F437A9FC731F
+:10EFC00008FC9BC9E16AF19DC1F9376332E39F16E2
+:10EFD000EFB7807F14EFB7CA4721FFB4786BF1D445
+:10EFE000F29F84F23B247F482E11F34F4C3289F973
+:10EFF000270AEC62FE891BD3C5FC13931D62FE89B0
+:10F000009B8688F927A63AC5FC13378F15F34F4C1A
+:10F0100077ADD6E4BFB84F93FFE2214DFE8B4D9AFA
+:10F02000FC175B34F92F7668F25FECD2E4BF7849C5
+:10F0300093FF629F505F58F79AD07F71FD51A1BE38
+:10F04000A4E13DA1FF52FF71A17D59E3C7427B5569
+:10F05000D3A742DDD3FCA5D0BFA7FC036FF1EFA17E
+:10F06000DFE1DF431FE3DF43BFDF43FE8B772C4B42
+:10F07000D785E6BF78DFE2590779098E5B1C3CAF84
+:10F0800040E4FC16DDED51F25F04DFFFF6F92F528C
+:10F09000927FF87C043A2BFB1EB0B7254F674DF9E1
+:10F0A000EEF9086E2D11BFEB9E552A7ED7ADB3B297
+:10F0B000EFB567BBC5EFBB6F2F17BFEF1E11E7960C
+:10F0C000000F6DFE8BDE1697CE0AF692E72908C078
+:10F0D00077BAD9106F2BC2F220E4BFC886785B29BB
+:10F0E000968721FF052DFF0CF92F687904F25FD078
+:10F0F000F20DC87F910DF9337C3C7F461DCF9F51A7
+:10F10000CFF36734F0FC197E9E3FA391E7CF68E20E
+:10F11000F9339A79FE8C00C239E13D8CE5496F2BB9
+:10F1200096A7BCC7B03CE36DC3F2ACF70C96E7BC46
+:10F130009D58B67B2F62196BFE0C552E3F04BFE124
+:10F140000A189FC9B32AA7573FF0C8BAD0FC1923A1
+:10F150001ED884721A2D6F460E7CD397123D6F46CF
+:10F16000777B94BC19C1F7A3E7CD481BFDE3E5CD40
+:10F17000986BF961F266CCAD11F33ACC5B75F9BCD2
+:10F180001923E24A6E41F9E3F238D7125BDE0C9F95
+:10F1900055E2DFE553BA80DF45E982EB750F790769
+:10F1A0000E5A9F1E02FB89AE21575D36DF83562E15
+:10F1B000A2D39BE57798F323E7CBE889AE6AFFF704
+:10F1C0002B581E87B9966F992FA3877C0B07B3BF67
+:10F1D000403B196BBE8C9ED6879EE839E347CE979D
+:10F1E000D1935DEDC99EBE3985D1B9770F7456BFF5
+:10F1F00097AE34B51EC297ED2E546D997F0F9F3B8D
+:10F20000D38EF1998E9DFC5E9C8B38ECA9EC7B7DB6
+:10F21000F0373B9E4F184EF03B7E3B7151FEC4F3DE
+:10F22000E7D2CE7DFBE05EC05A1B71252681B34735
+:10F230001CFA81B00FBBC604F19AAADD9FBEF1474C
+:10F240000AD7DCA2C7FB721D148756F4FB5C89C089
+:10F25000B778F24BDCA7C319DDA55EA1DF756B7E25
+:10F260000F0774490D9E3F15E82DB86FEADACCEE12
+:10F27000B3EAC9D58F4F188DF7C689DF81FC433FAC
+:10F280007519C7B38B106700FAEFB4E2FDD525AF4F
+:10F290002D34C0A070DE1A1A37E85524C6811ACC66
+:10F2A000B6E1706F2F5DBDBFE773B5821FBE88C327
+:10F2B0004D2911E3449F2C283A0CFEF3227719DEE6
+:10F2C000AB482B15E346847F470FDB32F03365C232
+:10F2D000EF75FAD97DCFB0EFEA9BB7209E4BFD9A30
+:10F2E000FB4B8D625DA5DB392BBF9762219698E8B9
+:10F2F000D676C5E31392BF3DDD8CE922DDCC0E91BD
+:10F300006EF14344BA68E966758A74D1D22D61AC56
+:10F31000185F53E9A6DEA7FCA1E89664E3F73C82F8
+:10F32000F42A31A5A2C9473C33E400CAB7561FFAF4
+:10F330005802F01B7E48BF64FF6A7CCB6995C16EA2
+:10F34000A533D0445AC4DE8B077D80FCBDC489FA46
+:10F35000A0FE3E8A78F22197FB8FC8255AAE987E90
+:10F36000F0F802DABA19E46D04FB3D1A18AF4A222C
+:10F37000B89F5388D30EFBA826AFC9B94881734DF7
+:10F38000E25C940DE799762C1FE4DF3B770C25B8FF
+:10F39000EF6F0A7C9E0AF7061E1CD9390DE20F9EFC
+:10F3A000C5A404D6AF59096C7D5DC64B5B028BCFFB
+:10F3B0006C28D111D768F87D4A7ABF44C76BB7BBB8
+:10F3C0005EBB01FCD116763F80D83BDFB81DDB4722
+:10F3D000E1F7E119BAFA6B001FDA1FBF2BEE68F9EB
+:10F3E000C8B630C40EB7373F7225DC6BDDA48BFC8A
+:10F3F0003D73818DFFFE1D7E3F654430DF42816D90
+:10F400000CE6657870001DA77A7A17F25195CBEB60
+:10F4100038FD0F964D41FC5E68911C10AF2BD4DF78
+:10F4200071D3308ADFB8B7657EAF97DD5F1FCDFB44
+:10F43000D79AA9FEA2FDAAFF1BFC9E95974ECA98DB
+:10F440000F71744D19DE13FCA3ADF030F02BC7D54E
+:10F45000340AE429BF2511CF713D1F12277E9AD5AA
+:10F460002ADE07CCE1F7B673DA881F84E2DA63623A
+:10F47000FBB836B17E9D66FF39DFC6F5D4465241F2
+:10F48000EE367EAD9760FDE8E824CE3514DF8E457C
+:10F49000BD71FC8ECF09FA891D5FEB8B22DD8F5980
+:10F4A0006E63FCDB642068BF379559F0DEF9FEB26D
+:10F4B0008AFEE05F7C7197BB7FA43865889F96C009
+:10F4C000BEBB772590B120876B2546EFFA8C92085A
+:10F4D000EB962A77AA1CAAF2975116E78E740FF5BD
+:10F4E000339B8472965736443280FCEC9530FCD5C1
+:10F4F000BE86E2759975DB47D6F4017C3CCD9FE171
+:10F500007D32538BE48A744FE7619B8DDD6F5CE342
+:10F510005B0DF7467E419508EC5486A13E2B127C8C
+:10F520001FD9887EE95D36077BCFC4F320C9F51962
+:10F53000709FA2BD79D2E47514CF27A83EC07AB5DA
+:10F54000497122DEBE2A42F09E2C8FD7F59D46B629
+:10F550006C08F17F37DB721B6D145EA38D7D6FD954
+:10F56000CBED94006FE77FFDC306F03B2E1A917F31
+:10F57000BDB9BFA9BE7780D3675C826B2BBC4FE05F
+:10F58000979F51E3E374DB9C8B46415C9ED23BC466
+:10F590000E06F9E663F951DC04CF3F922C3A94430E
+:10F5A000E27239ECC27D761FEA8DAA07242011C8C9
+:10F5B00053A0DA37A9450A58A9DC8F365902708F53
+:10F5C0002EA99CCE3B19F29A9818BC56F99C18D7D4
+:10F5D000A2F29803CE3DC1ABF3104805F8AADD5363
+:10F5E000EDE5DA44668FD63E24635ED4CD729B1976
+:10F5F000E2A9592E471EA4884C921D78AFA65F3908
+:10F6000071520C49FCC05F2776FB0154C9AFF94623
+:10F610003F2FD2775B176DCCDF1E97E0FE33D06BA8
+:10F62000F8E1CEFDE02E38CDA417BBFFC5ED04F701
+:10F630006B0AF97A37EE3F74EC7BD1C00D24F43BB2
+:10F640002AAD9DD86466EBFCB8EBD9BA37EEBC05A1
+:10F65000D7BD6E3B515688EBD4C8965107E09EC586
+:10F66000C80F997E126E1FECF40FD029E7B04F0F30
+:10F67000F4F9B67641CB6F123075D787EAE01C8675
+:10F68000EA5BC8FB67357664C5F441B5185EE6727F
+:10F69000D4FF1EA7DE1D4247EDFBDD714AC9D4FD34
+:10F6A000DC3110ECC8113DDC0BE9C8A5F3A3F3DF96
+:10F6B000C8F525F173FF6498D7C6961BCD20DF6B84
+:10F6C0000379F662FA4EA2A9049997485C18CF19FB
+:10F6D000493D32C88F518B4241FD41A58424A4C0CD
+:10F6E0003DB42221DE432C493CFF4B00F9D22DA72B
+:10F6F000548E43EFE5AAF2A99547557E6BE1A0052C
+:10F70000CE0721624E4BBDD484878146B2D90EEB21
+:10F71000BBEA5FD6727FAED69CE9C7EF977C19E84B
+:10F720001FADE4FE51ADA5D084E6605F32AEEB2B99
+:10F73000217E42E9B03285D979753E5AB9F45CD45C
+:10F74000137FC83EC12377E27D44CF45033E5FA7C8
+:10F75000B807C0FC55FA5CC3E9A3A58794C0F79D20
+:10F760009C2E3DE39B63877BC1892617598FF8E662
+:10F77000E13DEEA6C04813ACBFF76AF08D01CF6B38
+:10F7800013C684E3295BA2E099CCF0BC8EB8FFD805
+:10F7900046E53767455D6D3CEA15792B3D275CAF43
+:10F7A000B47AA4EA8D1AE7BDB6B2FE005EBBED41A5
+:10F7B0006F3CF18C2E4EA504EF5739F7C4A31DD131
+:10F7C000EAD3E77CFE9E7846BF058A7B06CCCFA3B2
+:10F7D000EBCC043919EE20BD8A2992C39BF5A8E72A
+:10F7E000A435B67BF8AA7FA5FA55DA7EAA5FA5DA1A
+:10F7F00063F51EFCDA04F77C9003A999CA2DC5A70E
+:10F80000D6CEF64B9B6DEE4580573CC53D0EF68D32
+:10F81000430259ECFB5F512FA2E941BC46CE9B024B
+:10F8200032AE0B3EBA2E644BE178A8E30F4A48642F
+:10F830007CA45A0EEB7DDF1CC206AB269837A7EFDF
+:10F8400070E28675ABEF48769F714D02B3BFB50984
+:10F850006CDD52CBCDB692BB51BF65E2338EFCEE70
+:10F860007803AA70DF7C6D82EB2EA087A9C885F390
+:10F87000E863274EF04BFBC84D127C379A54E99051
+:10F88000D83D7312FC7E8BC2EB53ECC8057DED03B3
+:10F89000FB6BE8DF1239CFD8A309EAFD5EE67F3AB9
+:10F8A00049771EAF471398FF7908529FF42A56F301
+:10F8B00082A9E7394E09E8D46EBD0D916EBF2031A3
+:10F8C0003F3D91D14BBB4F00C287FEFEBD7B0D4437
+:10F8D000362791E0EF59D599D0BF8F27CE26B05764
+:10F8E000BB1206F0734C671DD47F25779A128706EA
+:10F8F000E55D95E30727CC70422A52DBF55DC361D5
+:10F900004F45E57A27D0BF7D42D760CC41493A3395
+:10F9100099FCB8F442BE20950FCD8AC00733ECC3E2
+:10F9200043EDA4D53004FCD17629CE09F72CDA9723
+:10F930004A0C5FC9C4F329C9C23CD3E3997FDDC136
+:10F94000EDD53B09592827AA3DA6F3AB83523B0FBF
+:10F950008F11EF7490CE3DF1FEAD706EA5C93FA939
+:10F96000CD4F3969A105EF7F6CDC63C6FD6B57098C
+:10F970003BC7EF6A31A27D8EA6B7696DE688711C20
+:10F98000B5A4F47B0BE897A6D424823D4C9B7BD294
+:10F99000067CD7D2A543F25D7308F645AF2B11BFA5
+:10F9A000BB55CBF4F49B1217D1FEE91993B1549FC8
+:10F9B0003758E488F7CD4F73BD52E5F14A3A22DF5C
+:10F9C0000F9D06793CEF7EF31D1709DEDF6F88631C
+:10F9D000746C886374EC728F4F781AE4CD9781FA57
+:10F9E000B0583D07E5FB7F35CF943ADE46AF29514D
+:10F9F000A62AD0B0608A19D68914E29A3C1B947565
+:10FA0000A342E03BA2C7BC3B12F3318E6D12EFF96B
+:10FA1000DAD9BDE1CF3716E077DEA9648D7930A55C
+:10FA2000475989CE09F183F30BDEB7E9A83C2DE8ED
+:10FA3000D39A03F2FBBAE226F63118EAC2FDC99264
+:10FA400052833F40F996DC400D05A5CB7F03F9D4E6
+:10FA500012800080000000001F8B080000000000E2
+:10FA6000000BB57D0B7854D5B5F03E73CE3C929922
+:10FA70002433794E1EC009E19D108724BC1F4E9E81
+:10FA8000448830BC0485EA8028CF2488D6DFB6DEDF
+:10FA9000CBC444F4A2B745E9AFF4D6DB7FB0A2A84B
+:10FAA000200182069AA41340E4113408A8A8AD519D
+:10FAB00029620BC908EAC5D67BFDD75A7B9FCCCCFF
+:10FAC0004922D8DE4E3EBFED3E8FBDD75EEFB5F684
+:10FAD000DA872EC977134B64CCB7D8C0B64A8C7D71
+:10FAE00087BF1B43ADD96E602C89B196383BB54EAC
+:10FAF000E70CC7D284F07E8563693E63D5D6D85CB7
+:10FB000016876D7F3F8B85F18A58EAD202685BAC1D
+:10FB1000AE5A95B12546AFDD0ECF774EBA3CA48ED6
+:10FB2000E12FD8DF3392B12E236B94E2B01F606CCB
+:10FB30000C4350F8CFED56EDD097F0FFE1FD448B2C
+:10FB40002D20C3B8CCA35CECB0F047BE1B281E4DE3
+:10FB500066CC285E939ADEF846CA652C76721163ED
+:10FB600070DFCA5C8FB22CB8318CA99E18C6A2D89F
+:10FB700033F6F3D98C19F07D584757F3BBFD7C0061
+:10FB8000C71FFEE54A0C83FB1F29C118570E6317D8
+:10FB90001E3C15E3B6C1F507E5723FF46F4740C65A
+:10FBA00087F0926F870BA3197BC4EE1981EBBA63C0
+:10FBB000DD7F8FF1DA42F7D903703195B1157E19E7
+:10FBC000E7E6F0C27FABB65919B384FA95F509118F
+:10FBD0007DC018E1B5D2CCD6D4DB7AD26305D2038E
+:10FBE000E65DB17D8B295DC5F9BD93ECD0BFA0C0AA
+:10FBF000AB80EF0B0D317E5F66089E25DB4799D207
+:10FC0000E1D6474D6616807530A5DDC86C84B50A0F
+:10FC100009F0E61578D3C379B8C54AE3DDF57F6509
+:10FC2000BF1996BA18E67A201E9E6F5A51C1727B90
+:10FC3000AEE3AE3FA8652940BCBBFE4D623E953F9A
+:10FC4000FF601E3CFFC0235F20DDF4EB5CEC337EE5
+:10FC5000D211B16E376300CF3241EF3B1F8DBCBF75
+:10FC6000ACE9311A6729F39A909E776DD4DFBFE92A
+:10FC700033E4BB654C095D073C5C3E9265453CDC6A
+:10FC8000618F493C0F20038F8DFD0EDEDF7D6460A8
+:10FC90009C37A7277EB5F6E23AE06F33637F5E6755
+:10FCA000A1F6C23A46ED08BB4AF459DD74F27EE48F
+:10FCB000AFAAC65D261CA7C5FFA78409F04861D37B
+:10FCC000373232572173DF7B0EF0F92326B3EF0072
+:10FCD0007FBB19E79FF546CF3D48AF1BAF96D37D5D
+:10FCE000FDFA1769FC7F249EF86711AE3B17AF2B16
+:10FCF0005FF6B6AE9FE2BA809FD95858977CFDEB6D
+:10FD0000D2D6A3AD4FBB5F2903DFF5F2BEC6EF230A
+:10FD1000843E58FADCACF569808ADAE6CFFA7710CF
+:10FD20003FB1D328BF1A3F2D1374D2F38D46C76E4F
+:10FD3000FE68FA775A9F463FE07FA7C1896DC06988
+:10FD400018D7934FF47CA1E7834E63477F945F3DC0
+:10FD50001F744A6C416FEBFA37FB405AD752D55D9E
+:10FD60006687FB7731CF7A3BAD67235DBFA06C3CE4
+:10FD7000FC3394ABE7385F77EB3933973776DCE8C1
+:10FD800047BDB936464D71D804FD80CE9DBBCC3EF3
+:10FD90007C4E9BE7FC3AB77B9011F15E4EED9FD70E
+:10FDA00079DC830687EEDFFDAB2BB12ABCDF358C17
+:10FDB00095A3DC77C644C2BBCF2E133CFB900EC884
+:10FDC0007F4AFBFF7C803AE9B9F631A847CF7FFB39
+:10FDD0005FB11E78BEEB5B73796FEB3C2DE807EAF1
+:10FDE000E5B413F8EC762167B73755125D963C33CE
+:10FDF000CB84FCCC1EE0F8B4C01FEAD7B6A8D86705
+:10FE0000711D8B1B24D2237A7ADCE59AFA39EADB5E
+:10FE10003BFD85F47E0FFAB0C789BE77213D86850C
+:10FE2000E831D6A1727854F803BEB943F0CD7965B4
+:10FE30008DC9007AE4FC33806F007995C2DCBDE99E
+:10FE4000C1FE0ECE877DAD47BF8EBEE05FF65CCDB6
+:10FE5000FA3486EB1F654AEB45EF68EBBF8BB9625E
+:10FE600049EF88F5B28E1B495EAB2D7C5E6D9D2BF4
+:10FE70009AEE9C817C51B519E895D973DDA8771766
+:10FE8000F7026F997CD16881F7BA1E905CA86FFB6E
+:10FE9000A283A627EE12F85AB96DF10C349A8B6141
+:10FEA0003E3913F5D1176FC624A25C415FFA1E7A62
+:10FEB00035C91F9B711D8CE37B09E07B8374FDF4C6
+:10FEC0005BB6B9D03D28ECB915FE9BDC83C2F59931
+:10FED0008EAE6CDBACD0F364B7DD26B4C7F10EA1F7
+:10FEE000BF845EEE5BBE60E100E7DA1D0EB26F6CB0
+:10FEF0008D83F46375D31653B8DDD5E44B93B7B156
+:10FF00000E3BF15955E313F41CE85FD501FD4A4B54
+:10FF1000C7CF6F55C3F0394ED051AE30A1FEEE4B76
+:10FF20007F82BEF9B2236C9D231CC2AE08FD7B2DDF
+:10FF3000FDA0C1AD1F57D3071ADC1ADF6BEBD1F35D
+:10FF40007D5FF0E9E9C2989FFB0B3AFAAC427A84F4
+:10FF5000F5115E05F0DBD66CF53F04F0B6491C7E6A
+:10FF60005F7314C1DFE92C769F033FAF2A7521B57B
+:10FF700027F0C554F4EB3CD3109F9A3FC70A1222D6
+:10FF8000FC247DABF93779C29FDA1BE5CE07130954
+:10FF90003F4F02F2C3949A8E391620D9AD8EEDE50B
+:10FFA0000A8C3FE5898E3951D05FE8D8C1FB5B3BB5
+:10FFB0004E595C8CD5B057CA4BA07F3BA013C7BB32
+:10FFC000565B60F62C44F95D0D7E9205ECD1EAD3C8
+:10FFD000430EA1DCAD6EAF2897C0EEAC0683238143
+:10FFE0003DAA74C706ACB9D46713E0B9E7EDDE6586
+:10FFF000C42F57EBC86EAD3EAD70B9399248EB5780
+:020000022000DC
+:1000000000F62878AF2E1AFC55C0575DBCC5559B2D
+:1000100049D77D51F1D877AB6AD8758D1EF81EC2CD
+:100020005167606E07B4AD4787C4757C8FDD6E5D28
+:10003000C72A14E08383EB2CD4EAEF179AEC83D021
+:10004000EE151A98B7377DF9A483FB8DC0E4E94813
+:10005000E7AA23269277FCA11F5829F451151028EE
+:100060000EE0A93CCD02D1B1F85CD9E70AB60D1279
+:10007000FB24C25F61A1BEDC37DCD7DB56E17883AD
+:10008000C3F984E3A948912A94B0794B6C51117D4E
+:1000900039C5300CD7C3E468D756C0AF9C6E58B38F
+:1000A0001BD62F0F8016F0A1D85DF2626837164F6D
+:1000B0009197405B6BE476B5D6C09687E3E90581FE
+:1000C0001FADFDC0E1D98A74BFF456FB182BE9AB14
+:1000D0000C3BC9B9586FADE40A50DCD4CA5C5BE193
+:1000E0005A9DEC619C8FEB19F2F11B621C97D9B001
+:1000F00047057E6D747C40FCEB8A33DC9B09FDC0B8
+:10010000131FF17EBAE14A26F0F781273ACA15900B
+:100110000757B6E1CA40E81F7AE2637E7F220C09E6
+:1001200006EAF0139F94FB6C382ED7676CBB3B1B21
+:10013000E7510C12C9A972C0E4AF85FFAD8BE5FC95
+:1001400054073C82FCF786B0B3EB6B8A5EB602FFC5
+:100150002B456E750D8CE3C78069F4DFDF6A7894F8
+:10016000AD068A53B0457CBF29D6ADD18135B8B331
+:1001700067A15EA87767CF8E41BC7A4F225EF3DB22
+:10018000DAA7A03E6E78FBFD31E8AF22BD709CFC83
+:100190003688DD603D975EEBB7450E8B473F7014A8
+:1001A000BEE3003996DCDC9F94543B5B047257EB52
+:1001B00066AA09D695A28BEB1A18D72FCFDB3D7F05
+:1001C000C4F7584680EC4DA1C3FB31CEAF8F5759D1
+:1001D0007B7CAF7A59AFB74CB90FC8E8E7C4A737F3
+:1001E000BEB704F5FBEFCDAEC12AC2E5660F003CF9
+:1001F0003B0D4C61F1C426C394028C3FA35D1B50A0
+:10020000EE5DCCE90339C3308D80845FE298B0B8ED
+:1002100055AC07DE2F61D08E45F86EA0F5C9C857E2
+:10022000A3984746FD3586F9ADD87635BFE644BC80
+:100230003D19C5EE40BFCFB28DB9FD61FA63403CB8
+:10024000F7F726251809EE6863FD6CE4D7E82F98C8
+:100250001DFDAAAEFF3429383E08C874BCEE3A6CC6
+:100260006008E70B46BF3D0EFAC1E18AFA2C0B8D00
+:10027000D725E8AD8DFBA4491DEE407D93C0FB2F33
+:100280001472FB1CFCDCE47F3613F16359E30F931B
+:100290002F673CF75BBD4945F1F1D0D63747339C1A
+:1002A0007F6C4BB401E9F0F2F6BC28E4879D881B13
+:1002B000587FBCD97E0F8E177F05E0CDA4EB6EC2B0
+:1002C000ABA28E8A03BC4E9866533700DE5F88AAC5
+:1002D0009F86FC1FDC6160CFC2143B4DAE59D8DF56
+:1002E0007959B5A3BE7D21B33E9AD6B3C340EBD9AD
+:1002F000191D1CB116E0DE304C2947F8142B535061
+:100300000F2B8622F51EB83E349EDB574D2F2F88CB
+:10031000E7F2F3A404F3E7E17385243FA5B28DE48B
+:10032000AE2BC8FC669827696EBB8CF4889E05AC22
+:10033000847CAF046406FD491E46498D4936A35F9F
+:10034000257DEBB62D06BA4F11FA76CA87AB2B780E
+:10035000DCE33A3D11C63B6833325CD764D621A357
+:100360003F38F92A7305907FAEF278C60E7FE83FDA
+:100370003DAFF3074BC578EEA0BD042F17B2483F41
+:10038000AE7473D9E712CDA32A68A78B2DBAFBE808
+:10039000E7C5621B193795C50BFFA63FEBFF1DE9AB
+:1003A00037E05E98EF3E3B9FAF54CEF915AEAFAB52
+:1003B000DCE4423CECB2B9DF9D887AB1DDC8B6B26C
+:1003C000BEE5E979883FFDE0730CBB6A65FE7CE21F
+:1003D000471BAE67C4E68DBE2858F788417C7CE495
+:1003E0003BD42343FF333101F5F855A15FB456E305
+:1003F00033E4277B1CE727FB0D2139BC333E939E5A
+:10040000D3E40AF90CC7D96FF42FF4F46227813FC3
+:10041000EF44FEDC656314473D966A598072A5CDB2
+:10042000F3BCE0637DBBBE666DAB11D7FD15D80391
+:1004300080BB24EDAA29DC9EEF49E27C552A7F4B44
+:10044000FE766793C4D0CF4F6EE2FA3B9C3F527B5F
+:10045000E78F5F225EAFC51F5ABCB0FB87F2C79122
+:10046000BF8F3F365C933FBE8D453CDCD75C9CC262
+:10047000BEC7BF6914FCD0D7FDF156AEE7F4D75F15
+:100480001178DD67DA383D17F5C0CD0617CA395047
+:100490003F7D36AC635F347F8F296BB2B0BF4BE1D9
+:1004A0007A65579399F4CA2E9BD74B76DC6961E83D
+:1004B0003F30C5DBF133D4876916754318FF2E8DA5
+:1004C000E7FC566F0C8CFF0CFDE2A39CCEE36ECED6
+:1004D000934DF05CEA522EE705174C5B300E2B4D26
+:1004E00028DC817C74027516B4D5E7E029407CD500
+:1004F0003913E9BBD75A4E96617E11FC1E37F2D9EB
+:10050000D8FD27CB8A72F079AE4FF78A56EB8FC7AA
+:1005100035C5B3EE78D723ECC678C6F59207F92433
+:1005200037D4676E23C56B1A3FD447033F805CCC3A
+:1005300067AA3116869C73CEF330984336A73C9257
+:10054000CEF303D3283E9C7BBAFD55D0CC6C9E479E
+:10055000775FF0C17C1D1F809D3D1E8FFED2F18014
+:10056000C980F399D664737F684D16F293264FF4D1
+:10057000033CD5FF61D8B31BC2EC7B6C0297A3C7C9
+:100580005D0ADDF77598FC83E1D2BF33FE5EBDB036
+:100590003F9FA33C63FC70DF2B0BD18EE62F771FB0
+:1005A00044FC4F4F92E9FA2F58C09285F47129E428
+:1005B00097D51BD5E2CFA4D0734CF10CB3C1FDFD90
+:1005C00049D1F9387F6982F722D28929C123F8DE1F
+:1005D000D80979F9285FB6517509688F34B801AE2A
+:1005E000F2ADB6101C1A5C67055F94262CBE88EB32
+:1005F000C7F750BF347E7CDE82EF6B74AF6FFE8234
+:10060000D33B8CFE48EF10FDA53BB0AFE1E12BA141
+:1006100057B4FE3F4A7F2D7F704DFA637E20F6EF80
+:10062000A2BF352129447FF0B3E2B1AFF7B3EA4D61
+:10063000E077E7F4BC5EE828A4E75D265821FA5588
+:100640002D1077A23C7A1DB42FB0C7CEE7EAFAC3CB
+:10065000F9FEE022B2C109F184F76A537008FA2169
+:10066000A30212F985A340F01791FF95417ACF2597
+:10067000F0C4CE4BD2F961DC45FF2E1DFDC3400214
+:10068000FA51A3CC1501E4F7DDD629E9E8D7E559FD
+:100690002765215FBD3AECBEE368825E4D5BBEE735
+:1006A0003935E4FF68FAEDA018569BBF2081EBA115
+:1006B0001B41DDA21F882E63381C9A3E47F2201C86
+:1006C0005260BEE13B2BE9E5A60EA0C78D0807E00E
+:1006D000A155620DA8CF0B0DEEC462F4D392020AAD
+:1006E000F7F7BEE98FF9C18AA637DE43782B703F52
+:1006F00004E35097F162773E62604F3F58F357B47E
+:10070000B840F367B4F813FD1EBC3F405CB79B01D3
+:1007100040B447018BBF06E67FF2B23ADC2DE456C7
+:100720008175548875CC64ED0417FBF6BBEF260188
+:100730007D66087C541C81B83117EF337633E0E1D5
+:100740006685C79337BB207E0CE3A399E322FBF8B1
+:100750009B921C1AE75ACFEBEDC044DDFECC3FDA8A
+:100760001E017BF409B8CEC7D6F1B874C240D9A730
+:10077000A0E11C9769407EAC16F60DC2E85EEDD292
+:100780004BC22F9E60E8C875017E5BF7FF8DECE0E1
+:1007900081FD7F7B07FDBCF19F2BCC0CEF4FF8BC9C
+:1007A000200EF5041BA7125F69E356FFA9C1CAF822
+:1007B00075E2FF2AB1F6C3008F7B28C267A1F677E6
+:1007C000179FDC84E37D794EE1BC2DE62F3379075A
+:1007D000611EBBCCC4F3018725EEFF68F70F1B0138
+:1007E0006EB8BE2941CB0BB493DDC79F398CCE3791
+:1007F000633E202F44D79B2F947FAEE4F6A40FFED8
+:10080000FE37F2015A1E60ABC01F3B78D6A4025CD3
+:10081000531BEE51D0BF9EEA94993B6CDE9B542B48
+:100820007387E5039E49D0F923075FDC3403EC4965
+:10083000759BEC8A42796DDA753C17FBEDB2CBDA29
+:100840000B1FE9F13BB5E91E05F9DF98A8927C5F23
+:100850006BFE0923804F6E40BA33F2EB3AC748244F
+:10086000477AFA1ED8FFEB848E9CBEF1DD17FDF5AA
+:1008700074F8DDC522DAEFB9163DF47CDB02EBF447
+:10088000C1FA02B04E1FF85D07D6D9A97F689D93C3
+:10089000FA1ABF5637FF3601FD368D4F4B1338DF3E
+:1008A0008CDFB72981D942F4D2F0F5A1B0577BA3F0
+:1008B000347FC3356F065C3A05768718D4C7DA9D56
+:1008C0006342F66BFEE932F23734FB355F5E544A21
+:1008D0006A53D82F4C23A35ED3DBA9B9EA6223EB7A
+:1008E000CD3E2D88EC97B76D5462A867203A4992A7
+:1008F000C087F0B33538CE300FC1A9A7A706971E21
+:100900001E6D7D9A7F3D5FD06FCEA04C23C2DFC3AA
+:10091000AE8A75E2409887B85EBBFAB58E9FAF5C31
+:1009200028792BB717BEED8B7FF5F7357D508613F1
+:10093000E451EB43BFC298984C742BBB6A626EB013
+:100940001B2C238A7D1A665758C550E29F7B851D54
+:10095000EE8B7FAAAECACC9B1FE22363E31356E45F
+:10096000A37DCA462BE62727DB66D5C6019E4AFE35
+:10097000543417FDBCEA0E03C3145669D31707316C
+:10098000AEAF7E8FB9502F1635B51623DF1D52DA64
+:10099000658AB3BF64EC89307FB1B1A9D68AFE54B1
+:1009A00063A24C71FC6107E74BEDFE9644AE3F1A23
+:1009B000CF5D9EE1EEE5FE1971BFE4E33CE2A3B238
+:1009C0004741AE310E4D8AA1BC4489649F53817E5C
+:1009D000C84D46F2F3218EF923EE035E6A34EFC26E
+:1009E000D47E69E323F7D88110F5FFFD698D19F3F3
+:1009F0000BB324D7B3F05C991A6CC57ED9DC4CAA32
+:100A00007B18FB3F32F9B3C15B25CA8B9401BB60F5
+:100A1000BF6C51A61FF313FB25DEF735F37D02668D
+:100A2000F725CC8079DEAE4818B581784AEB0FCE39
+:100A3000DBC0042387C557F7ED9549CFDC572AF96A
+:100A400071BFA9D49ECE7C617C55F6A889D635BBF2
+:100A500029A508F9784EB9CCFC61FC1D107EE13C5B
+:100A60000FC4E161EF1D8EE270051703DC52486E82
+:100A7000A7093E9FC5B89F387F4142C47BF0C62D71
+:100A8000688F6E6D8238157AD344FC7AAB373D623D
+:100A90005E0FE37ECD09162C8983F1FB250D24FE24
+:100AA0009B11B48F0EA8A877CE24A25E63C3B89C16
+:100AB0006872572AAFAE237E70F27DB279124893E6
+:100AC0008CFA2F529E668E8BECCF72F7A8378890E7
+:100AD0007FBD5ED7E47E5EB34CFB72F30A2517EB55
+:100AE000453FE8FDECB1D17DE8856FD587E37AD34A
+:100AF0000B1F96FF5D7AE135082BC681FCFE345151
+:100B0000E8877EAC1FEA875279FB26E4972EB07700
+:100B1000E65EF845B3175A3C5E06F24AF27E91EF64
+:100B200067945E4D65BEFC503CDEAD2FC09F70F5F6
+:100B3000E2E73C9D984572D4AD5F34FD11E64F1855
+:100B4000C7FCE3FE4429F891A63C842F83E02B6385
+:100B50003C1F588685439897737E41F9966A88F3BF
+:100B600029DE67BF25B850CF49F12139D0FB195A8A
+:100B70005ED72AF2087ABEE8CEF3CD35521D8CC678
+:100B80001765762E1F657365CABBEBF9449B4FCF83
+:100B90001F015D5EE69AFC21E4EC87F24773A2D860
+:100BA000571DC4065D0F5F68FCA0F187DE8E1CD365
+:100BB000E567FAB2236FA21D19DDB71D797D989103
+:100BC000F4B5DE7E68F6E277495C2F6724F27D8E0D
+:100BD00069C3E7D9D0EFB026F13A0DCD0E75E7978E
+:100BE00036737E78BD638922A13D41BD9019867F11
+:100BF000916FD5F8AFEA5189F28D15422F7536F312
+:100C0000FC5B7589ECB7C0FF16373DB189F78D9451
+:100C10009F2B545A150B8C3BD325B930AFE316F9F3
+:100C2000BA196E89E7EB5C91FBF42D3AFACE117C90
+:100C3000349305EBD01FD7EBA53957B95FA0D74F39
+:100C400073C4BEFB1CDDBEFB554DDE07B001FF4C7F
+:100C50007FC09CF4FDFE80F6BE46478D7E2AEEC521
+:100C6000A11C1DFCC6A4C670FF19E937F5AA42E312
+:100C7000D893045F0A7FE6CB8B79BFA0984F3C5F87
+:100C8000DDF485C93BB26FF8AFE5B7C6A29F3E3A27
+:100C9000E4B76BF34E53184B47C74C674F6689EB6D
+:100CA0003FD47E0CD7AD43A383A6477BE059E8D958
+:100CB000BEE8742D3DABE9B37FB69ED5C6D7EC80B8
+:100CC00036AF5EFFF615B769FA74FD1603E54B26DD
+:100CD0008BF878B2C8C3CE4FE2F1C1AD493CEEEC1F
+:100CE000FACA62407BB9B385FB272EB3FD38FA05FB
+:100CF000A17C1FA7E7C331CC87FBEC4C69B7D0BE02
+:100D000067119012F73DD3F8BEE77625E0213DED5F
+:100D100052580DC8C9397C0FE679F8806F21EAE98D
+:100D2000873F1962A0FD7725D08EFEC9D83C85F695
+:100D30008F1C6695F2C19DCD663BBED7B5EFFFB463
+:100D40001A719CAF980B43B843CDE6EEFD1BD40758
+:100D5000A5729B8CF9FBAE20C8083C3F6941A018E6
+:100D6000E3A0C9ACBD16E57B02D2B117FAFD2A4952
+:100D70008BB37BCFEF1737733FAE3846263F6E8A73
+:100D8000AFBD18F7ADA62892AB169FD5E5F75FD19A
+:100D9000C51FA1FCBEAAF0FA435DFEBE91EB99EB24
+:100DA000CDEB4F40DD067CBC5EE373A16F581FF9AD
+:100DB000FD9D26BEEF133C6964E807B30B89BDE6D1
+:100DC00063AE95E7DFD712ED5663719F8EFBEBFBA9
+:100DD0005AD2DC6A6EDFCFE776048BD03CEEDC3E85
+:100DE0005BA1FA35911FEDB17FD2C7FE88BBD17EE2
+:100DF00008D5695FFB21C55FAA94F6B95EBC697529
+:100E00000B4CD43FDDC8B49F9BE474E7F96837F21C
+:100E1000F9CEF3696E84EB79C1A71ADFEF3B77391E
+:100E20009AF6414D6E15F78F830E8BEB59E25BCE30
+:100E3000EFF5A943FCB84FFB1B21173BA383C7B2B7
+:100E400013C3F73DF83E47CBBA47679F33D27EB90D
+:100E500084F9486D7FD9077243753DF18CE20F2309
+:100E6000AB67386FAD9BFD1ADB2993D438C4FBE523
+:100E7000446D1F538DA33CC4B757A8CE508FFFDDE0
+:100E8000EB9807EB511AD6593C0AC8FFABEBECD4F0
+:100E90006F5CE7A476FF3A95DA878EC73E8076BF0F
+:100EA000DA6DF22861FAE39D64EE77E5657F524CD6
+:100EB000C5DF7F6354873EE5C10E19F5C58D5761C7
+:100EC0001D117527CA65C437E537B342FD4C6971FA
+:100ED0000CF66FBC0AFDB0E7AF2439B83DAA53EA5F
+:100EE000462793B4105FFC2DC9DD9104D7EF7178CC
+:100EF0003EC176B734FFE02546FD73BC7FAB7C096D
+:100F00009ECB0F14525E391FF3CA7934EC42C4DF12
+:100F1000E85613ED976BF9DD3C4DFEBE8ECC33E702
+:100F20008BBCEEABAC83F2CD051608B40C0817A74A
+:100F30009F5B9AE794301F98647261BDC3E82C4FA1
+:100F40003EE6635B9318C547ADADC9196A0E720FD3
+:100F5000CFFBBAB5BC2FFBFEBCEF918F627DA4B76F
+:100F6000AE9A687FFAC8A9585780F60B2DE4FF693E
+:100F7000F5C82DD1BCCE80652CA03CD38DA29ED1CE
+:100F800062F69A93495F050E9E80F77E7F99F17D08
+:100F9000C7F60F695FBBD8303C05EB7E0F4A43E3D1
+:100FA000B07DEAA3D81C6A4FC55E44FCB418AC2AD5
+:100FB000CE7B669D5A82756D27D6B112AC637B6B72
+:100FC0009D85DA93EBECD49E5AE7A4F675B88EFCB7
+:100FD000731C9E477E71BF65A37D92296FD9146CE7
+:100FE000F316C650BBFBB61813C2DB12CBB66BF3BD
+:100FF00060BD5A203AD080C9FED6A7BC8F59FA816D
+:10100000DD337B474AA3186B7BCA3B5D990CE34EEB
+:10101000EDFF93AFE0FE9BC9CB1EB3005C734FD9CD
+:101020001ADAA0FF76F2F2C76CA86F8F4783D2C39B
+:10103000F5AE38EE1E047443A590C605978D837EE9
+:1010400082D65F31BD641263B71477643360ADEC50
+:10105000E495D32D80C75BACDE1F63DFE44B9A5E63
+:10106000D20FFBCC87F56041C948713FCB9012B1DC
+:10107000FE65A6C3FB467258FD9E5BFA13ED338DE9
+:10108000714BCC41871F8CB4EFC5EC1F2784CBDBA1
+:101090004C47E91B488F89C9BC0E78F424C91D5EF2
+:1010A0005FA17F6EF439B504E934E642591DB633C9
+:1010B000CB1DD4F72C185B87F25C62EBEBFD627AF8
+:1010C000BF3C99D78D142952445D89FEB97C6026B6
+:1010D000F48F8347A3294F30FAB4B716EB4F4B9DDB
+:1010E0009979B2A6FAA8EFD882FB6DA32BCE9424EF
+:1010F000A0FCD824179A8931ACA32E01EE17DAB1DF
+:10110000A00AD7F54431D6FF8C562517A2ADD0DD05
+:10111000DA80EF17BA625C85E88F9F564BD0F49C5B
+:1011200052469D2880E7A60E925D1618E854E0A668
+:101130008997A05F382C8EF2BC85CA9A2B27A81FEE
+:10114000E3AA51711D5B7E5D45E398C9AEEF9E51E8
+:10115000FC2FC83F459E38CA09023E4AC2EBCA600E
+:10116000DD0477A15DF64749C8DFFF5A6287FEEECE
+:10117000FE1296CBC37CC3FF42F78F44AB5100E80D
+:101180006E93BD04C7DB6D92EC0F51DF538CCFFB28
+:10119000861855CC1F952546458C3FB5441A7F0EC1
+:1011A000E1CF891B85D7CA331C11F7DB6EB3929D43
+:1011B000A8782B87FCA2B6DBD2C95E54BC35A9083F
+:1011C000DB3603F7D32BDEAA28A7FB061E07572C16
+:1011D000FC915BF429EEAD585849FD5629E52738B6
+:1011E000DF959CB83CCCAF4D1B945AA244F88103C8
+:1011F00049FEF3447EAFD0307CD32480FFDEA37C55
+:101200009FA2222733E2F91905524978FDA86752B7
+:1012100054447F7689A324BC0E756E456A44FF96BC
+:10122000B99911FD92A30564BF410F5494801E38F3
+:101230000AED5260C1025107A5E59F0A054B15B69C
+:101240008BBCACC2E3EB61F0877AB0C41669A777B8
+:1012500047733B5FCED6D00649F911BEBF5D966895
+:10126000FC24DC4E94CB15365E97158987BCA346CB
+:10127000B2977931921FE3FA92A34BEBD0F49667C1
+:1012800044BEAFF961E5023E6D5EE673B7A33FA2CF
+:10129000C1ADCDAFC15F2E2F2AA17CF735D6A18776
+:1012A00097C17A503FE8E1684A16FE1AF81FE4AF8A
+:1012B000897324F04BECCD7E6BFE7A05E82B47B8A2
+:1012C000BEB2498958B7D797BED2C6EDCB2FD3C689
+:1012D0009DE9F0D0FBEE1D9F9E9A2087F5333F4E8F
+:1012E000880FEFBFF8E9A688FB491FCF7184F7B7D5
+:1012F0007E3A07EF4F51D45A1BF0E53126B97CC82E
+:10130000076DAA1203F4283EEDAEC3B6F4432F9640
+:10131000ABB2A9E77C75D84EBCE86F33C3BA6E1A7E
+:1013200026AB18BF6B7E881EDEBF26F3BCC3B1ABF5
+:10133000AA15F75977FB542BFAF3BB1F54ADE88776
+:10134000EC76F37319EE2C039D8F7167F37AC5BFAA
+:1013500024F3BA834EF1BED6FA8DDE4E841BEBCC5D
+:10136000D137A8FA264875E5C7D0BFCAE9E95F1D9D
+:1013700053FC369CEFD8837E5BF87EE2F5FA577F0C
+:10138000041E43380A99E409D723C596284FB8DCD0
+:1013900096DA1D11FD93C20F99EA4C8D78EF263530
+:1013A00033E239F01B87A15F526B62546FEB33F06D
+:1013B0007A5B3D1E57A4F0F8CE65B3A33B83FB6672
+:1013C000726FE7915CC5865ECFB7A5A4707FF03FD2
+:1013D0005218C1352B85C3A7AFAFD5F76BF17C0F82
+:1013E000E293B99CC8E72EABE10AB8BCACE0E927B0
+:1013F000A6535D6DBEE1DE2CE8573CBD753AAFAB40
+:1014000035ECC13ADB194F3FCFEFDF60C837823F81
+:10141000B0CDF7C274AC2BAF8AE2F5095551A23EAC
+:10142000B46E7444DCA3183E7E6A21C69FFB8D0C0B
+:10143000F3FC8F99C00EE685F6D9AD661EAF5A4D06
+:10144000BC0E7C7DE6A9F5A83F3E8BF2E6A5509E3A
+:10145000B148453C5EB45BA83EF4BE7DA529C807F3
+:10146000B35278DE2B7BCF44279D2FFBE7C151FC85
+:101470007D7060FD308E73717736F9E5D903189D64
+:1014800027D1E801E1335D8F82F081CE6330B7135D
+:10149000F36FB50E138D332B85F3E3F5B63DEA8973
+:1014A000E30C6B7641BB2085C7CDB7E2BC046FB0BF
+:1014B000FF2CDCD0B307FBCF1EC9FB486F59CE0B06
+:1014C000A27F1BFC510CEDC3BC1FCDF1C63282B410
+:1014D0006FF3EEA26CD706BACEF1B8C03FB0B643F8
+:1014E000C5FA0F7F3FACB718E8F42E457CDC66F6F2
+:1014F0000F26BEB2AD89C179AEB7DEB8EFF921E0F3
+:10150000047B327F3CA797363FE0D882747C579C9F
+:101510003BD1E001387E8C70687075C3A3AB3FEFA0
+:10152000147E7B278E971BCA5357FFC940798A6A5E
+:1015300009F424F4F77CC85C3E95E8437950DCD28A
+:10154000C2F9C69F58526C83B6A071158F8FDB9578
+:1015500088BC9866CF268AE7C7BEA744D8A389224D
+:10156000FE1DAFCB4F4E6C9C4EE7F826EAE2E25FE1
+:10157000A488BC651A4B0BCF23AC15F1C6E5B68128
+:1015800071E89F2A10E7CA806F932AB371F121BDD9
+:10159000D0B08E459C53D4F870E469FB9D38DFC809
+:1015A000D3EC0EF207B471BBF3131C2F97DFE37873
+:1015B00019D531ECE949D0371E3132BF1A5AE70448
+:1015C0000E2A833087E2A4CB176C645FC61C9D4350
+:1015D000F5DE66A781A961EB8F52A3991AA62FADFC
+:1015E000C3E223FAB2A04F5D54A41F902FE6897185
+:1015F000A5458CB73FBEEC08FA05F9B6E5E417C47B
+:101600008D1B18311E6B5322FC833CE67163DCE8B2
+:1016100002FAE27ED998D34A841F302EB091CEA12F
+:101620008EFB30F2FA847391FD037DD1A52FFCB1BE
+:10163000DCA7D12FFCA1F873B823F197501E89BF06
+:10164000244F24FE521644E227D51B898FF4E5234C
+:1016500022EEF75B9317D11FF0C08488E733C18077
+:1016600085F7B31E9D16F1FCE08DB323FA4337DFF7
+:1016700016F1FC70FF9288FBD9DB56FE207A8FAC06
+:101680005F1BF1BC9EDE3734FE34627C8DDE3EF89B
+:10169000FBDFA437730AFF50D03B51D859879BD743
+:1016A000AD75196D8FE2797C3C3682FACE81E7E91F
+:1016B00063D1FEAB5497E79BC6685FFB97B2474286
+:1016C000BD940EA8356451BD3CD5F5FDDC6088D8CD
+:1016D00067B73BB93F6477723DFE6B133F2F950EA2
+:1016E000FE26D929030BC5D916AC77648299AC8F35
+:1016F000639C5DE7E818A63A306F07FDC921BDAAD3
+:10170000E9D1DBCC6A6D07E8975132D793A03FFB54
+:1017100039619EF7A5078DDCFFF019D1FF48B7307E
+:101720005F6C1ED919CA433B58A284E700E2427A93
+:101730005CFD0E88757065369DC37A134140BF59B4
+:1017400075D17ED3AD9A9E5A3E9CF4D4655BA4FFBE
+:10175000767969165D3F7BBB99EA07CE8A3A470DD9
+:101760000FFAF3D6DA396CEDFEF22D9B62D0EF3C26
+:101770002BCEFF6AD7270BFC4D76CAC2FE59D66026
+:101780003E6C1118F138C07BE5918ED8DB18F99BBF
+:101790009370DD555BAEDCFE2AF4AB0DC1646E3791
+:1017A0007CF4DEFC77F9B9EEF97F8BFCAE408593D3
+:1017B000C7F91562FC5BA0B1039E6E013A38B07D9B
+:1017C000635219F2275CA7F371338F3023CAF32CCD
+:1017D0006F26D54D9C62AE337B01C4F94E95E09CDB
+:1017E000CB3C46CC5BBD737B650C3ED73D9E360E35
+:1017F000300CFA25EF3A7CC664CC1B4CE6751330EE
+:101800009F05AF7B16A53F8C76499BEF1DE6BD7407
+:1018100006E83B9BB9685C6D7C86E9F9303DB57B99
+:10182000F9AA8F1260BEB5470D948F58DB6CA6786D
+:10183000AD6BE57FED780AEEDF91DED10FEDF6FBC3
+:101840002BFF3604F9E1D6CD325381DEAADD7BA72A
+:10185000336C5FE5ECD22B31781FECEED6A7D05875
+:10186000BE6CA63AE2F757BE3C24DC8FAD74162E50
+:10187000C7F7D8B8EB3BEF58FCD2F014AAF712FC2C
+:10188000B442F0D3DA178792BFB536A69B9F787F14
+:101890002BAF1BD1D67146F0E3CA97BE89F8CEC4F0
+:1018A0006EE023D5CCF7C5D4A160EFDB2EE7D2776D
+:1018B0001F8CDE7F75C2BC2D573F89C5FE9E37FF4A
+:1018C0004AF0B3B9D7072FCAA26F4C687F5A3BEFD3
+:1018D000B9A029211FE90E72B601C7BFED772F5EAF
+:1018E000FA00F1D3FCF2D69FE133D779FE739796D5
+:1018F0007714F6C625F001F686E28B2E16CDCF932F
+:1019000008FF46C11DF92CFA9E874A7CED66C77117
+:101910001FA7B6D5407526B1B8091496AF8B950DA3
+:101920009A51725B9CA0AF859EF97FCEDB2AEAA814
+:101930003E20D21F2A38B432C20FF2C05FAF7ED031
+:1019400033DE5ACC2FE9FDA1F101C36253DCF7F875
+:101950004587A6F5EA174140ED96C688AD21F835D2
+:10196000E8F4F37E2157F53816E6FF03D1FCFC338B
+:10197000980EF47B7F9ACAF5B72D83F1F36952E78D
+:10198000300BE8CB16E7A2C71F856B96417CDDD8EC
+:10199000AFA53335F9C47FDD7ED7A111A4B7D8B781
+:1019A000301BE243E43DF4742BC0F3ECF961722781
+:1019B000DE0F1CFE6B2CE67D77C4AB6F213D8247AA
+:1019C00065DAFF89523A4C8E5EE2BB57510F029F97
+:1019D000CAA9DC1E581A797ED1A2BA19C60F51764F
+:1019E000FBA8F0737F8D4E1E4F561E7EBFBF09E8C9
+:1019F00071C9D0169B03E3AFDEBB3B16DDFF0C9332
+:101A0000F703E4C35567DF1E63A7FCCD96FE180FEE
+:101A1000D607F87730462ACCA7E4F584A37A332C8E
+:101A20002601CFE927503BB2297F19F2597580AFC3
+:101A300013C7C642BEE18D12F53B1B6BE371BCEAD6
+:101A4000DF37A7A13CBD9CC4E3CD97AE66F3F71585
+:101A5000A6E0F341A74310D36FC0F8E46511D77433
+:101A60005E95E9396DFE918D85B21DF82127B0F1A3
+:101A700000C5514D6615E91AF51CE378688A22B94C
+:101A8000AF6E99CAD0EE7739984B82FB3BA2837F29
+:101A9000A4F36ECD6615F3AD51F68D2C1EC6DF2175
+:101AA000F659870347E17929EDBA365F54D3D31845
+:101AB00073203F50DE374AD9C826DBC2F11C437879
+:101AC00076A4723EDA111D30609E253898B1670900
+:101AD000AE109C8CE6D5E01CEEC7F3843B4CC1F302
+:101AE000786E06E0B223FD87330E276B1AAA629E3A
+:101AF00020CAEEA67544D955974FEA0957752EF3BB
+:101B0000A35DFFF943AC5B6E518EABA3437D0BC865
+:101B1000C08E814CC8F9CF1F2FC908EF83621917F7
+:101B20007A7FC8AF363E5E3789E2099F8CF12FB4C9
+:101B300031F1B84E95D6A7608A298FE301F7DBAD66
+:101B4000167EBFFB79E06F1BF66DFC39579CDD3AC2
+:101B50004D2239E1F5B8421FDC2705CEDF08A4FD90
+:101B60002A702057055856BFB19FF87495A1E9A96E
+:101B70009170FFEE28AF2B15E67BED43039D6BFDC7
+:101B8000F38B51FE0AC0C7B07D5B92DDBDC8877E76
+:101B9000FC47DE7BE8C974A4FF3E49C53C6C973125
+:101BA00048DF37A96AFACC44F50D8D1F53DDD39B6E
+:101BB000A9DE4938CFB8C61ADA8F1ECF36D27E7466
+:101BC000B6380F5EEFE4FAE3F2E921CFD684E17F85
+:101BD000492A972F16F40E40B96912F2D9827E0A6B
+:101BE000B47B85BFB4B7F5D62C352C7F58C30EA473
+:101BF00023BE1F6287A8D5AE77F9F9B9CAEC772C56
+:101C000077B8C3F86F9190F745A9224F96EA9D8D5A
+:101C1000F0AE6AFDC414ABE23999FAFE6857EAC126
+:101C20009FB2F782976EB9D5C951B51234E1F3D599
+:101C300017F8F957A0731D9E3778F99DC6118BE1EF
+:101C4000FA5EC035D695FACE9AA9BE72AFD1938E00
+:101C5000CFD79CF93A17F556090201F07CDDBC6A32
+:101C600000E20DF8BE281AE56B17233DA6C9670EE2
+:101C7000CA27BC9F837C5F80FDE1A4877798DAF94F
+:101C8000F9D3BDFCFC29F03DC901F0BD1DFD861C4A
+:101C90003BC801BD3F94E47B47BB81CEC9FA408F6E
+:101CA0000FA67ED11CECEF682FB1937C635E3F0FD3
+:101CB000E5347080C6A987D8044927314FB83FD989
+:101CC000E88C25BA69FAF1B093093BA1C6E1790322
+:101CD000AB2C47C845983DE47D612F4FFC2AF0F8B6
+:101CE0002FD176B8855D10FE14F3E6939EBF57D8CA
+:101CF000AAB5AF4F98B91DD6B9F684DC5D3F8EFE0C
+:101D00006B40F0C901E1CFA29D5013783D0E5E1FDC
+:101D1000BD99D7D58E71AF29C6B3CFE3CA371EC4DC
+:101D20007682A7BE18CF3E4F5AD07E909F81E6E7BD
+:101D3000D91B0EDC948DFBDE5D67CD0CF75D1AFEC2
+:101D40001AFCE34B8087FB5B00FFBDD825580EF1E2
+:101D50001F58EC74E6EC79BF4BD2F4C7A90AE4C76C
+:101D6000CE0639D40740AA80C1B1FFDBD4938FFBE4
+:101D7000A09F95E67E3E15FDED742FB55D27FF9A79
+:101D80008CB660EF69EE473598DCD9C83F0D032368
+:101D9000BF1FA0B54FA61A890E057D7CBFEB482A50
+:101DA000CF6F0EF1B1C7908FAA1A64BB1FE87EA94E
+:101DB00041769BC01F3AEFF626E3D99C0BCC77CB3C
+:101DC00044B4F3228ED4BEF77217FA2960A7EEFE50
+:101DD00065EFFB0FAB99F65B6340BE5AD624B1FFAB
+:101DE000001C2C7F26F2F9D5DAF76A1AB71CC6EF69
+:101DF00088AD7C4E771FFD15FA0E46A41F7324553F
+:101E0000F827592C0BFD13E023D20F46851D310313
+:101E1000DFAE48F7EE437BFCB2F8BE02E85192C752
+:101E20007D4E615744FD417007AF2B1EBECD2F1B69
+:101E3000E0FD098A5F467BC5A0C57D87716E6F197D
+:101E40007D87C9E73E8DFB3ECB853E5CAEF9697E62
+:101E5000BE3F026637C24FAB16AB1FCFFCB5B1B861
+:101E6000FE6D12C5CBABB645EEA7548BF5AFDE7C4D
+:101E7000F2309ABCCA7ADD7DB1FE6ADDFAB57DF337
+:101E8000CF5323EBBFAE773FE42F46EE37BC2DC6D2
+:101E9000D1EE9BD2B87EAC826520DD56FB65BF9F3C
+:101EA000FB7936FC5ED09D625D770AFAD33AE1B9E0
+:101EB000CA6D923F803CFE78649DE95DF58BCB90C6
+:101EC000AE7A3E5929D6BD7CBB91FC55FCFE0FCAAB
+:101ED0009D9E3F568AF5AFD4ADBFCA2BE9E0E37EA5
+:101EE000744FF8EA6F413A576E37B2DEE0D3E8B587
+:101EF00052E3EB3EE0D5E0D4E0FEA1F0F64F13F95B
+:101F0000AD116C04D1A93CE1BAE8A4F773771D1EAA
+:101F100041DF5BBB7C6420C5FB1A1FE8DF2F137E0B
+:101F2000F2D4CDDC6FBCD4586C1D89F14C9BC1251B
+:101F3000A9149FC58E04BCE437CBAC02FA5D4D59A1
+:101F40009BF0FB8379270AE660FC9F7FC240E7EFA6
+:101F5000F61C29A07DE7FCA38312B228CFEDA2EFE7
+:101F6000E3C038645FBBDAF236E1F984AEB69202C0
+:101F70001C5782E7D00FC81376A2A62DCF1A7EFE7B
+:101F80007C4C1A8FEFD73B3FFD39FAE9537719E9BB
+:101F90009CC55463F04DACDBDA7344A17DF2D527C8
+:101FA000963C1485F47D51A27DF2C3ED6B1317228C
+:101FB0009F3519EDB8EFDDD5F4E30378DFB75DA207
+:101FC000EF5E54379766EF807EDE967C57F8F9B364
+:101FD0003C874AF0B1542BC5CF53FB19C96E5E4CF8
+:101FE000B3FE16FD9F95EE2D24DF17F7EF3151DD7F
+:101FF000DE0E89A1293BEC3CF80AE2E3E2AB274D77
+:10200000E88417379C34757C8F3F70C92FB300C5A7
+:10201000CD1B4D18C7546ED1FA1D26A49347F8471F
+:1020200055CF7D4CFD95E8CFC37C2B9F91A97EF7C2
+:1020300060F36B26E4E7AAED124BC90CBBBF598ACB
+:10204000F85EC312C6F96089D03FAB987F7D1A3C19
+:10205000B76A23AF5B608F46D6016BFCBD42F0F7D9
+:10206000AAEDB3E8FB533DBE5B8871E30DF81CE7B6
+:10207000EF659B23EFAF107CBD42C7D73F4913FAF2
+:1020800067381B8E7CFD75A11A9703D7BF3EB972C6
+:10209000406FE7ECDB84BDD6ECE5E58081EC8DFE9E
+:1020A000B9CEC62B046775DB6513FAA7654D5F10C3
+:1020B000FE2B9A5AA97EE466E65D8DF8BAB9C96A24
+:1020C00047B9AEE8E07A685A93D9EF97F07E3DD5EC
+:1020D0003977B5F0BA49DF7E89FC1C4D8F69DF770F
+:1020E0005C26F0B80C14787A1EFABB3C6EAE127106
+:1020F000F28A615B0EE33E7B95B8BFFAE8C158F403
+:102100000FA7B12F6E47FAC07C0CE763CF44E27D86
+:10211000BAD08BD3B773BDA8B76B5DA9D933298F5C
+:1021200009712AC2B57A7B24BEAB74F1F963693CAC
+:102130003FF6820EDF154166CD413854D9E5A7A799
+:10214000DB159CF7482ED85BB4936AD6F77E87F1EF
+:102150004DE1676BFD99E21C78BD7DA32D3C6E8E31
+:102160004AE7FEC2CAF1B20FE9D51D6F0C3A98AB2F
+:102170001A42F106C419CD69493CEEC08292373249
+:10218000649698188A371E716EAAC8837EF5762EDB
+:10219000F79DE3603C3C7FAD30F247ABB79BE99CD9
+:1021A0006235D09FE28A267E9EC2D3249522DDC16D
+:1021B0005F3F9A86FBB198528575CF6AE47C3FAB4E
+:1021C000E40BE297A383F87A2F2B6A4A6FFEBBE6F3
+:1021D000B7E3F93035CC7FAF0239C5E7AB9A783D2C
+:1021E00052C3816FFA67A29E6BFEAFFE8BA1FD5AB0
+:1021F000D845CD2F0C825F3890FB45F4BDC9BB8517
+:102200007C2DB3F37DBABB85FD61521DF17995B18B
+:10221000FE503CFA593B78BD00DB871F8503FDF873
+:10222000F64B75F1B0EECE9724AA87C3F7F17B94F5
+:102230009D4BEA3F41BFFBEB1D16F237EF06BF6532
+:102240004A5E4FB9D4E45BFB6E560D7B88FCCF87AA
+:10225000581DB595829F3B1B6BE9FBA09ABF42EFCF
+:102260000FECE98F540ABEAFD4F15F547A24DFD566
+:10227000BC1D4D7E63D751D98EFB3180AFDFA48565
+:10228000E345F8210D07A288AE5D276D6447FE2C5B
+:10229000F8EDA2C83FD78C93090F86F1BCCD6E79BB
+:1022A0006D20D211F18EF5F72FB7BC36829FFBF669
+:1022B00013FE576D9323BE0F5B591FF9FDD79AB7D5
+:1022C0006FA3EF0855EFEF866B88293104575F72D3
+:1022D00020493C8E3448917164F53ED9135E7706EF
+:1022E000EBB903F551BA9007A6049331FF35009D71
+:1022F0000680AFA689D3D5D0CC5B98FF169E273138
+:10230000D2FC3DEE17F956E3FDAF33AD7CFFFAAAE0
+:10231000AF02FBF70F94A9AEF3FEB7570E0DD7A38C
+:102320000CE104BA561B83C9146F9E34107CD52768
+:102330002F270FB2A15EDA5282DF0F9D2EF4DFE16C
+:1023400081D6E5C8CF3E9C372534CECB69BC7E8F85
+:10235000E17A9DE86DFC928F2BD6FB109B2DE26AF3
+:10236000CE4F39697CBD108F8C4BEF251EB95EBFF7
+:1023700013ECC3A98512D633293E8C87F7BCC7F569
+:10238000424DF3B28F90DFABDF37539DD7FD2DCB9E
+:102390008652BDAFD77B03FA1B5FB7ACB881F2831F
+:1023A000D24304970FE173A25F732619EB522B9B64
+:1023B000CF2493DDDD3B7A932F06FD97BCE9781D92
+:1023C000FC09E23FF06B88FFF6B415687E8C15C7F8
+:1023D000AD3CAA78103F95470B8E57A07F71A2A8FD
+:1023E00000D5B974A280FC987CF4636C21BFA65B15
+:1023F0004FA6733FA6AB358AF20B121BC8F9870DA7
+:102400008AE09FD50DAF93BD5FDD2847D42F6AEFDB
+:10241000DD99AED038CB34FEA997DCC41FBB78BBA6
+:10242000BA710FAD6F95B19EE85DB3DDC8EFEFE017
+:10243000ADF67D581F8BF7213E8EE325A0C3349364
+:102440003F03F3D3C732B99FAFA7C7E7E93CFF719A
+:10245000ECAC7700F2CBB142EF507B2F76C2C78A4B
+:10246000785C2B097C37F07353FAE73E4B97C477BF
+:102470004222CFB76AEDA974AE3FA7997AFF2EE04A
+:102480006FD2B57309EC31430146C546FB06E1D76F
+:10249000A7867DD761CECD46F2174E31FBEB58EFC4
+:1024A0003843D3B3E3B87DD5E7CBE789F73C9B55F9
+:1024B000BE5FA43B3F334F3BDFA43BEF364FF83BBF
+:1024C000F374FECED3E9C28F1FC286A01EAC17E7FD
+:1024D000EFD60E8FF287E7B3F4ED61B12F82E78775
+:1024E000B0AD19FE2EE57D8EB59E7D85EADDCE462A
+:1024F000B1813CAF47F9EFCA3EF2DF35DD723937C3
+:1025000082CF34BA5C12DF83D1D365B7A6AFC4BE25
+:102510005DB4D8B7F31BBDBB519E2B2D174DBCEE40
+:102520003068427D56339CFB4D974A25DA6F073859
+:10253000FB9BC3F4FBA5541E7FDD7F8B4479D756EC
+:102540007C1EE3AC7A89EABC2B03ED26E4A7210DBF
+:102550008B1F26B9F5B1D32CECBB1A332DDC4E768C
+:10256000D34F5B77B71D8BF7717D9C482D3E8F76DF
+:102570007186B083FA735143597B593AC033DF2DCA
+:10258000B9B01EA02F3ACF5E30EA7544C3F5D2BB76
+:1025900033DDFB4E3ACA79FBE55B308F7A6CF86726
+:1025A000FDD18E56F5C1C71F0B3CEBBF2BE31AAA1A
+:1025B000D6E2F7556A9DDE0ED29F866F6347301CC8
+:1025C000A7E3376B25A41323FEEF4B7E3E13E37E78
+:1025D00096CEBF770FB8A77D9755E9BC4EEB98D143
+:1025E0009F41798A9CEBDBF7AAD9F7462EEAB3CE56
+:1025F000D6A3B9A630BA5E5C0B7A00ED4AF3C1648B
+:10260000D516CE7706E23749D2F84F11F632920F3F
+:102610002F221FE6607B267610EAE35DA76207E3C0
+:10262000787B79DBCDAF4DFC7BF6101F0D9917132E
+:102630000EDFC304DFA57A3E0E631D43E68C0CBF9C
+:102640005FDB171F5B33888F3B22F8585B6F3D7E43
+:10265000CF07E38016337DCF07F3D78E3039199A31
+:10266000C1F5CF58F1FD9EF1CC47DF391C2BBEE3FD
+:10267000335E6101251EF7CD0232DFF7E5E72DC697
+:10268000087E1EAB045AB18E62BCD8E799C0DAE965
+:10269000B9292C48AD9BD9E91C451173513BCE1289
+:1026A000988EEE544E7D3DD525069215C7798B3810
+:1026B000AFD10BDD42EB57E8BB3DC49F329ED7E95B
+:1026C000FDBB2FB333B8DCD3C74590BE9718E5B92F
+:1026D000F07B6D38C9448595637DD3648559A2012B
+:1026E000DE5D870C24CF2D1DAA1FEB535D09E2BDD3
+:1026F000CF19D5E18E757379459383F518DA7AF59C
+:10270000789800E3619E6DAC029128E13140F3DDE1
+:10271000C8F8399242A652FD736946A6D0F7418A9D
+:10272000A38A218E427D6FB0F8081FD33354BA8F2D
+:10273000FB25B130CE848D127B0FF73FB2F87AB50E
+:10274000F1270023E0F9C2E919DC9E614AF5BD7862
+:10275000BE8F124B05CD2576FE9DA364FACED1F532
+:10276000E2B52B997FEF32F6CE60E7CF0A42FB4904
+:102770002EFCEE516CE83B9B2EEDDF830844FE7B84
+:102780001077642CF911F2A356AFC7BCFCDF7DD0E3
+:10279000D7EB85D5E7B10B61E7B0B5BA926DFED93D
+:1027A0002A9EF35B9068A173BF7996FEF968C7060D
+:1027B0003ABD34FEFBD2F6C13498E21FED8909F12F
+:1027C000BB95B9C721BE437583FC3B50DDE7AE9294
+:1027D000199D57B49A797DE563201FF81D26902E28
+:1027E00015EB68D883C5548FB9DE6171E17909337F
+:1027F000C26D0DC15D6B11DF05B5F07D717D3D686A
+:10280000ADCD40DF1DAD65D1740E3D29DABB2E0381
+:10281000E0BA2FA688CE7767EF9CE444BF317CFDF9
+:1028200093B4F51B7AD647C27A1FC9E8A51E515B3F
+:10283000A7F6EF76D805FEB475DBB5734A6E25E2D0
+:102840009C92868FC7A2F9BA8DB8F39F45EFAAA8CC
+:1028500037F4EBFDFFDC29BC16A06400000000008B
+:1028600000000000000000001F8B080000000000B6
+:10287000000BB3D36660F8518FC0C19A0C0C5DD2C7
+:10288000A862B4C41D120C0C9780F80B106702EDFF
+:10289000F5926460F006E26D40BC1D88C5A518186D
+:1028A0000280381088FB80FC7E204E07E224A81BA3
+:1028B000B30519187281381F880B815848808141EF
+:1028C000588078FB8B1519185EAB22F85A6A0C0CED
+:1028D000C91AF4F3FF60C381B6F4B5EF16D0BEE5B4
+:1028E0006E08BE0490BDC20D55CD4A37FC66AC42A1
+:1028F000935F8DC65F83477F810D2A7FAB292A7F37
+:10290000AF3903C3072435DB4CF1BB051D2B00FD9C
+:10291000A788274C9730A2F22732A1F2F9A17C00B8
+:10292000BE1E313CA80300000000000000000000B3
+:102930001F8B080000000000000BED7D0D7854D5C2
+:1029400099F0B93F7367269999DC24433260126E7F
+:102950007ED0A001879860B0586E20E147A30E0892
+:102960002CB440262888166DC49FC6DD500609BFCA
+:102970000921E14F70D11D105DEA63FBC5565B75FF
+:10298000BB7682D646AB3568D787767765A015BF0C
+:10299000BA761BD96D976EBBF57BDFF79CCBCCBDB0
+:1029A0009900FEECB7BBDFF3C5C7E770EE3D3FEF24
+:1029B00079CFFB7FDE73C725BB59701A631FE31FF6
+:1029C0009413731963B5A9B2C5C362D9398CE5767E
+:1029D000488CD530B6B25D89CF827F1676B4BC8282
+:1029E000F5E56D6EC35DCA58FF036E7F0DD44F6F62
+:1029F00057C26EE8DAA8F8A8BEACCB15761BF07CFF
+:102A0000EB472FE7E3FB8D5298419DB1BB199BCC5F
+:102A1000D81A0FFC13EACB2A921DF8FEDD2D52388E
+:102A200086AF99E99B04EF6F65FC7DF3038AC6646A
+:102A3000A8EFBBAD894D64EC961E98C5430DD9C770
+:102A4000BC3D63058C45F823D6B205DE57A6DE47AC
+:102A500058D7470AF46B8E399EEF9BF53E0BE07B0F
+:102A60002DF51CD6730CFF3185B14B993F783A1B7D
+:102A7000FE1D66E18F15281BF2191B9DC297B364DA
+:102A80000CA01FC5D85CC65CAC1CC6A9BDCCC5CA11
+:102A9000607D161EDB381E97354984C7653E46F5B6
+:102AA00077E74AF1074BA91F9B5E0D253C2FC88392
+:102AB00032C8CC4228231E96C806F8E7B65DF61E3B
+:102AC000AE7F034E359ADA2702F07E018BBA18C02A
+:102AD000F7672C46E56216A7F2CB2C41702C6543B4
+:102AE000252AD4EF52129B18CC130E45A7E3FEFE05
+:102AF000AEFED8BB12BCBFBF5AAA9D0225F3E5D1DA
+:102B0000BA2FB43E6B7E9545AEC37118935D113FED
+:102B100063E3AD751E66B18A20637A8F8FD3CB6174
+:102B2000D6CFA03EBE41D04BE3FB7208D6DDF33CCE
+:102B30000B633D049B3905EAA1AEACF806A8F73C4F
+:102B40001EAB47BC1C6B01CC43FF638D6E295A053D
+:102B5000A54B7745A00CA98C2980A7FA86F592028F
+:102B6000EDE646F938E34D4D665742FD704C52C5CF
+:102B700073ECAFEB314987FA78A83F28E17BDDC5DC
+:102B8000609C86865C57B20AF1DD334687B2E2B0BC
+:102B9000969001BFF5A64ECF195B4474355ED0DA2E
+:102BA0005C93F79B7B38CFCFE83DFBD3C7D67BC088
+:102BB000EF25457CDF8E1D2ECB417859D4DEBF48F2
+:102BC00065314F5E0ACF3BD7C10B770ABFBB0E976B
+:102BD0006D45BC1DEB53C382946DE3C3B8BD0DF0CE
+:102BE000FE4C951C560CE4B3220E7F85EED77DA9D2
+:102BF0007176AE83F697A5E06854A6F6133E4C4670
+:102C0000FC38B706DA57A5DA3F81ED018E3D080F93
+:102C1000F55B73D48BF34418CD33123DBCB04EA793
+:102C20007E83621DD7FCEF30EDD3DC861689CF2B77
+:102C3000E06BB0C36795167C238D7F4CC0658D6FAC
+:102C4000CDF7C4BA10958D4AD523F7E2BA8E687CC9
+:102C50005DF38DC77723FE8E78C231A83F79DDDF23
+:102C60008CB91786B862FAF3973FC370BEE50FDFE1
+:102C70008EEB7A2E8BD6F5D487675EBB910D9FF7CE
+:102C80002D81879F9E9B3F44756BFEB9A6344602FB
+:102C90003AAB34A5840BE8E558FD571EBED7C07A81
+:102CA000BF89F2A4D23C664A504E846168BF99FA4B
+:102CB000A78F419E554277E4C7490D520BB67BE280
+:102CC000C687BE741F3CFAA98BC37DC55F72B82F3F
+:102CD000BB7EED9308EF6537AEFDF93350BF02853B
+:102CE00020F0DDA537ED5FF377F0CF6F2CFCCBE55F
+:102CF0007B18C9855836C0916B4A0CF777D9F7DD38
+:102D000036B972EC793FC99542B33486FCB7AC4F03
+:102D100022F9DCDF08721FDFFFCC1D77237F3D2007
+:102D200099D4FE59771CE5C3311763288F971DF797
+:102D3000C6915FD8AA6524AF2396BC36F397DE0B05
+:102D4000E3BDDB60C9734EA7F41ED6F7AEF98BED79
+:102D50005743FF33A62B8C62D392174E3CBF2BF008
+:102D60001BA92F273A58A6265DE10CF4D0DCA6D883
+:102D7000E4767DC349A2AB6550B2343E9D2BF86C1E
+:102D800059C32F047FEA24979CF0BC515B589C895F
+:102D9000EE4E09789282DEDEC5FDBE0CE1835E4810
+:102DA000375D4A5C4993D3F0E78A4CA07A0C59FA14
+:102DB000962D76382DB9DD12CBB6E92B90BFFF8268
+:102DC00072B3B92DDFF67C6E0EAB9DFAE9E4F01F0D
+:102DD000480E27258207F42FED7F242EC5512E5A49
+:102DE000FB7387D89F4805A3F5FCEA80148FC1FECA
+:102DF000FEEA8858DF3E29AE4844AFE6690F8E0BE5
+:102E00007396A7F6FF76B1FFA9FDE3F8B1F095D26E
+:102E100073B99B9200428B2F5282F2DAE21F0BBFF2
+:102E2000FD7B7E5482FB57D856DA5D87701E508832
+:102E30007F3FAC3F598CFBF6AE0BF00AFD23871F9A
+:102E40000B305F0AFE1621073FE8007A81E712C2C5
+:102E5000599906A780DB857568777B83D4877CFAD0
+:102E60004B31AFD5EF475B66CC44FCDCD12331C49A
+:102E7000CFED477A97FD39AC7F753C3B8C53FCAA6C
+:102E8000B1387009C0B3A2C7BE9FA7B6DC1C40BA58
+:102E9000F9B02FBF00C7B97D6A42433857275ED5C6
+:102EA0000CA0B35966AF96CC40571FF66D0860FB77
+:102EB0000FD59E1BAFC179F629E1F530FEEA23A5B7
+:102EC000334D4EA744BFAB057E4FAA3D33C7007CB0
+:102ED0002DDF282779F05E9F323B9E417E7E5D523A
+:102EE000880E56B7B9655CE748F4F261878B2570A8
+:102EF0001E3541F81CA9DD077D2DF4BEFF81C21BE4
+:102F0000D07EBBBDDD45F2E2F63637D1D3EA0629E5
+:102F1000CEA414BFAD10F0AEDEADD0FB93A644F24C
+:102F2000C3DAAFDB05BD9D3C7CD52BA8EFCF80FC81
+:102F300041B93B63E30FB54B000F2BB67079747248
+:102F400077EED27B508E087D798718F7B6B862E3AA
+:102F50008F95EDD9B6FD8876E5DBEAA78FE4DF58DB
+:102F60008774DDA590FEBC65E3635A88E493DDDEDB
+:102F7000440E9B5490B22F4FB0A105D748297AB286
+:102F8000E8E7D636B03703C3EDCD962312D9A317A1
+:102F90006D67B6819D3971B89D69C99108DA67E599
+:102FA000293962C98DBB94E8D820C0F16B57F4B2BF
+:102FB000FC72921B0F48B54827FA6FD1AE6431A559
+:102FC00016E5DBC5CA0B5AACC547F0F75E07D0550E
+:102FD000067A9D817405F3CCECE9CF48CF33248386
+:102FE000C64BD1CD2D01E25B1C14E068F6985D085C
+:102FF000E72530B1B79A4AA6E4F15285FA668419FA
+:10300000E8E1D45A297EA894B7F3A13C05B8AE8173
+:10301000E7CD5D97C7B7496817C21FEACF366E770D
+:10302000433BD39F47CF4D09CAA2F6D297717F2E5B
+:103030000101A055F3F6380FD8598412689F7057D4
+:1030400053D75800CA62E827F3FEF41EDB05488E0A
+:10305000C769BD383E8E53A1C4D7A09CB1E878990A
+:10306000903B20572B55A0AF66961546BDD9DC5630
+:103070007E5EFBE586B05D7EDC5467D703734DBB97
+:10308000FCBF79F625B6F60B22E5B6F77FB6E80A5F
+:10309000DBFBC5D1AB6CF52FAFFA82ADFDD2D619F3
+:1030A000763FE9A7B9B49E35822F4782FB75212F61
+:1030B0007FE2B04FADB2E9FA44CDDBB04F6C9D3B3F
+:1030C000FC381427E6B0457D6972C5274B84CFDFF5
+:1030D000009B70FFE04F1F131E437CDEA6BF70B73E
+:1030E00066A23B4DF4437309ED2567FB138B619E8C
+:1030F000B47EFF26494487E7FA314FCF2F01E4160B
+:10310000E0E41C40FD9D2C5982FBE6CE35E8FD5DD8
+:1031100072B200EBBF61437BF3717F7DC962E49FB4
+:1031200066953D27E560BFB0C70DF38135C4DA80F1
+:103130003E5ADA7E741CED38C908B22558F7F812E9
+:10314000C8DFACC3F561D2C23BF0616F28FAA104BD
+:103150007048EDFDBF97F0FDF799817A98258B7245
+:10316000D17FC4A9D2F9B069066B457C9D68B4E3F0
+:10317000CD2BD6F17349A676CF31F3B7C8472725B3
+:103180009DAF4FC0BB4D32CFE27C16DCEFE6EA1AB2
+:10319000FB74702B722DC2FD23827B432B4B662B5D
+:1031A00023C37D0533DDF2A8E1F09C656656A6E7F2
+:1031B000B3805D333DBFDCCD2AD15E3D216585D72F
+:1031C000976239F48F5F03BE8A7DC3177EDC184E89
+:1031D0001753E55C9ABF59D8BB85ED52221BED53BE
+:1031E000E621FB95F53C647A50AE0911D7D2269DB5
+:1031F000C4F5B38E4633E949AD9719124B6F776E1C
+:10320000DFDBDCD4DE923796DCB2F069C9154B7E89
+:103210005978758E3F929CC1F1D43C843F3A494E17
+:10322000A7131DF03101E131AB71FFAC7D033732E3
+:10323000E6A91E79DF2C3905ED18FAFF23ED17E01A
+:1032400089EC3A5798119EDE0D0E2D7D0AD63DD0A1
+:10325000C6F5F5BB458CECC3336D570DE4207E3CC1
+:103260009E0AC44F219F8A150687D6A17CF5A9899D
+:103270007E84AB50E82F2FE3FAAB90193BAE46FFAC
+:10328000BEFDE4126C67ED4FAED89F66D81FF447C1
+:103290009A7D43C56827B951AF413B37C85D94CB90
+:1032A00085EDEFFF07EAC542875E4448583A1C594E
+:1032B000553BAE36D2C7FF6823DA97D6B8D4217D06
+:1032C000FF83DA49C46F61FBE6BB95806D7CE963DF
+:1032D000C48390DB68769D9BA714ED5539E10EA45D
+:1032E000E8C20997D56F243A61E9F394DBEA644FA9
+:1032F00038EBEEB06693CFEFFEB13CA7D5771E7AE0
+:10330000738EE7A46F271F083C7C0A3ADDC4E9945A
+:10331000CB058B6FFFB3E8346AED6B2CF78E23A8D7
+:103320005FBBB4F02C03ED84A11F723BC16D1C4246
+:103330003A8B495995F03EDAA192DD68D915FD6BBB
+:10334000FF7A4B193C3F512B931F71623DA7FB3D08
+:103350000F707BD4D2DB51A1B7D12E40BC82DD30BF
+:10336000E0E6A507C7F1AFBFB95402B83DC650BFEC
+:103370001BDBB71964AFE6D4C5F54628E315873CD7
+:10338000E38C945C4AC6F2F396C37E7D2BD7581625
+:1033900021FB3A3A7AAE3FF5FEC732D74FD34A58AF
+:1033A000DE6C182FB9550E3F08FD932EBB1EB3CA15
+:1033B000350AD797492F2B413F78A476438AA557E2
+:1033C000758DF665FEC071DCA791F6017640A738D1
+:1033D000E6393AE478877968FCA4DFAE874E0A3D87
+:1033E00064C1FF09F4EAC262A08FBD5266B83F1201
+:1033F000E3459F030060BFA32A3333B573AEFB1FC1
+:1034000044BF84ACD27C3B2A76CEC6FD8EC5947078
+:10341000FA7E58E55F285C7FE6CC6DC86D84766CDB
+:103420007DE67679A2DD63F7652D42FF0A50A7623B
+:10343000BC2614D3E7CDC678E4D4BC49E863FF18B2
+:10344000F50FCCBB3B72466FF17D227C14849491C6
+:10345000F1F1A62CF37D74F0ED1E70D7507E262579
+:103460000FC55F5A62EE8C7C6CC929A73C72EA39A1
+:10347000C934595BF570B9628DFB49F519C8872CC1
+:103480006554CA6E3FA7CF2E961E47900325328BF8
+:10349000F665F04FAF56389EFA633C4EA19A32E97A
+:1034A000AD994A1393004F1B828CE4411EEE35F216
+:1034B0006D038B030A583E0B0FF8509E046596204F
+:1034C000BFD5E9079A4DE8070639684C1F55D65F06
+:1034D00008CF83F357D239038B7079ABC37F9C8FAE
+:1034E0004CD2176E81D7686C12C539F39AEC72DC36
+:1034F0008D7E20C847BDC1F17CFE4C3A6F70B3B4DD
+:10350000E7B08EAB147FF03498F6AC9AD5207F5696
+:10351000EFBF6AD76218BFE6919BDFC672F2C17B2C
+:10352000F2BF0465DDE3BB6EC6B2E4B5E8D84CF18A
+:1035300054AB044E61721DC0E763863B67E476C6F8
+:103540007A25827635EC6307D24332569E85F4BDE8
+:103550004AE1FCDFBF400B607C46DDC2E5AA3A1FB2
+:103560009047F4CFFDF4E6943F4D7E852AFC24A5D8
+:103570005DA13842522FA378CBA12DB28625C8D9A0
+:1035800018CE63CDDF2BE2D49D22DEEA84AFB76490
+:10359000A818E5E089F51F917DA8E859E1D9305FC9
+:1035A000979F95101C225ED02CF62FB9B6DE931E85
+:1035B0002F52849FD37174CE80817430A084BD0655
+:1035C000F18D86E346B74C67187F99A58719DA1302
+:1035D0009DC2EF517C26C37DCDD6D94CF46BE195CD
+:1035E00016C2FE552C9CC0FEEDFD885B58AF793BA2
+:1035F000F2C10FAEE576C88952BBDC0612EA823D05
+:1036000065B38AD6AB489B4DC1495721CDFF5E2992
+:10361000107295D3EB1BB5531EDB0674F09CDBBC1C
+:103620004719F509F8C821D77F006C82FBF6A8641A
+:1036300097E75679D0C9476D12D985AAC9D73953AA
+:10364000F9B011F5E446B01B0B8DE1FCB2F1754603
+:1036500076E346E0BF586926FEA99650465C2CFFEB
+:10366000E4B5E74A18C7F8ACFCF3978A38A713FC0F
+:10367000037496403BE651C9E89C02EBFBCEBEC604
+:103680001F4F81D7CF1E58917D0D94DF8B6FBCFEED
+:103690001A98FFF6C7F764E33E3FFA2AF0D379FCA5
+:1036A000788B9F9AD1863D4F9CCD586BE727637DE1
+:1036B00005F1D35B0AD75FFD0B7EF7C6D5FF9F9F51
+:1036C000CEC74F6F2B409FD3FE74B6387A1EF9D603
+:1036D0005CC434B4B7A08D89741E0DDA4B9F9A4533
+:1036E000F85EE7E272CCEFF272BB23C4DF3BC7FBAC
+:1036F0001BF593C70F16947F763E5DE7333FFA3C88
+:10370000F81DE40EC99B13E3EC7CDFE9E274F72BB0
+:10371000D7275EDF3B5FF81CD607763DD977D7A960
+:10372000CC403F60E20B1E1216AF8EDB780459626C
+:103730001A3C0FE5F1F7EE3C929771B46386944A18
+:10374000EA6F326EC737D56C3EC2CF25062B168185
+:10375000BF3C07FE85F6C8753EEE57C0382C04E323
+:10376000AFF6468BD551341EF997AF3EBF2F88F286
+:10377000E5758F5982CF5952CDC5F301CBEE18991B
+:10378000DF55763ACDCF7A5A6304C7A94B358A57AD
+:10379000A2180B407D6BE9A514A764E1D87109EB71
+:1037A000A37486725C094616931DD2E63666417D87
+:1037B0002B1850B120D12DC94DA5BD37144039006B
+:1037C0007609BE5763733D1AFA2FA3640C42337710
+:1037D000DB47E4779F28E6F2B6630AA3739A810772
+:1037E000FE6DA98CF64EBB9BCE2DC06E247E8D0A3D
+:1037F000B9910C4E0FB5A09F51A48525A86F8AFDE5
+:10380000E2F8D7B83C313D93D3E3233CDED112E25A
+:10381000FEAED3EEDBFCF5CBDE3470BC1FBED6753E
+:103820003994AF3FF9F3D72F87776F7CEBB51A8CBC
+:103830007BBBEB345BDCD1CD8C37D1DE029F29A181
+:10384000A17C8E9D5C829B99F2EBA418E2275AE33F
+:103850008FE37A91B7113FC9290A3F5F84BF10C037
+:103860001710F075074F55D13CB1F7FF2393BCA754
+:10387000BFC9428F40BBCD79F7C7518EA4E69B44A8
+:10388000F2290AF209FDC8A8AF67C91A9ACF1F7EAC
+:1038900010FBFC11767572EABCF0D096792D88E7A2
+:1038A000B90B3C3AD2993BB6F96EA473E73ACFF81C
+:1038B0001EBC144373B6F9814FDC159AE925FB97BA
+:1038C0001DA6FD104D2CB8755020187780FECB56E4
+:1038D000B00CFD0DE88FEB047986F6B6D50FC8D88D
+:1038E000C4F59EF14DBF94E2FD225E61F5BB292631
+:1038F000D139C14DE5C006E5C3F1B4C127FFE46B82
+:1039000078EE12537485D341A8220D6FF8678F9B10
+:1039100071BAB86C9F5DEFC2FC0B4BF17D4C217A04
+:1039200071F2CBF8B8BDFD06DFF9CFF587EF27C7F9
+:10393000F344C16F567F0B3E8257CA145FB79FCBCB
+:10394000DC5467AFCF1D868FF3C3355DB59FDB3485
+:10395000F8ECE3CD0CDADFCF2EB2D73760FCE6937C
+:10396000ACDBC1774F8F31BFA37E06BFDE92BBEFCA
+:103970007B227F4BE3A86186E3F42FD83B7F1ED0E8
+:1039800041A1CEED8EC2F90B1B726B504E31916787
+:1039900092D9FE2814FA5E697F49C9417FD4E4EDCB
+:1039A000934BDE9A9183E7C5758CCED3A3EA3DB1E4
+:1039B0001C23658FF4ABE55988E7CFDF1EB9DB9B8D
+:1039C0009E7793B2471E78D5A8C9608FA8F748267E
+:1039D0008C336B09D82355E9F648AB8432287B0930
+:1039E000D823647744DF437C8D6497FCD8B2EFFD25
+:1039F00099EDEA3FA85CCF829EF9A7CFA267C6796E
+:103A0000CD7F513F077B605A89B13292810E3F5082
+:103A100079BCC3D29F8DC1848267E7A03755173C1C
+:103A2000BFB62EF9128AE30E7D6710D70DEB71B980
+:103A30006A3FFD7ACEA81C9E892ACF8319A9DFB7D9
+:103A400046F057BC9A57D82DF6FDEE5FF08E2EA3A8
+:103A5000FF027E0CFA2F495FD9368C0B9E89A91480
+:103A6000AF53E7AFDC3D17E909EC6C4ECFE7B7AFDA
+:103A7000AF1D926D7C3CED6C968DEFEB99FD9C6ECD
+:103A800086C77E4ED7A8DBCFE96685ECE774730C5A
+:103A9000FB39DDF595F6733AA77D3F73B4EBBFA70D
+:103AA0007D1F6A64C44F17B0EF819F6E427A1A89F6
+:103AB0009FAECB37EE8F64D8EF6A8DDBA9ABBD919B
+:103AC000054877D30C6ED74563EB291F302F0AF2D8
+:103AD000A694E28614F7B2E25A56DCCBCA0BB4E2E3
+:103AE00059CEF89515F7B2E258528CC7AD9A3DD130
+:103AF00015086F73FB4919E588FE1CCC838C609D0B
+:103B0000E30D8BCF7179D0D29E392EE78CBF8DD843
+:103B1000EE53F2D5E7A01FD6E37A2DFD007CFEE040
+:103B200067E173905BDB70BC7F417E1F45F2A49B15
+:103B3000F6AF02708D763AEC838671FA05A7F763CB
+:103B40003C4E3DEE26BEBD58FF17131D64D8B42869
+:103B5000F8E018CF8AC64A49BF587C63F189D33F41
+:103B60001EC61FFFD5FC7391FE31F0CFF75CE7D185
+:103B700047C01FCF23BEA75572FC3AF9C1A27F20D0
+:103B80008984548DFB1D4D607B8BDED98B6113E1E5
+:103B90009C28FC9A13A335F22F4E3CFFEFFC1CF639
+:103BA000794F789C5823BE9FD85D10DF569AE23338
+:103BB0008B9FDA3DD11FBBD2F240AC7CC7C31EF352
+:103BC000757C1E52FB12E8AF8466B3F00683F8ECF6
+:103BD000187FCEF9D41766143FFDCC7ED95E571CF2
+:103BE000CF875AA4A1A58CFC56A621DFAA429EBC71
+:103BF00098153D89F86C9E1E29E1F43434CE077087
+:103C0000FDA243217FEDB3F253F348F83F878FE8DD
+:103C100090AB76787E40BADC42F9160A69F10D5213
+:103C2000067925F01567E131B83ED8CF7F473CE6ED
+:103C30005531899623F8B8D963FEC1F5D9EC0F4503
+:103C4000AB4DF131E0CDA3A15CAC06BC950FC7DB59
+:103C500049175FBF93FE426A5246FA0F811CDD206E
+:103C6000A59D930ABC58EB19493E5B749A76DE1009
+:103C7000D2D2D7FBFFA85CB6E4E5E59EE864DC079A
+:103C8000B71911F2CFA4FD75CA99E176904CE78C73
+:103C900067C0EEC16E172B5FA79DF5E261099B7AA5
+:103CA00056A1F2DAB37478C2BE78369B4AF36C3E02
+:103CB00095F56773A99C7EF6122A679C1D4D65C316
+:103CC0005900064C9CC6B3A554CE3C7B0595B3CE9B
+:103CD0008EA772F6D9ABA8DD9CB393A8BCEEEC1707
+:103CE000A8BCFEEC142A9DF68FB15E25F96DC92F94
+:103CF0004BBE3BE5B725FFFEAFC9EF58C345D93FE3
+:103D0000A0FFBEAA9D477E8F242F80AFEFD3D2E5C0
+:103D1000444A3FDFAF7D06BE3E2EF814F8F73D8CD7
+:103D2000C378C08BA3385598C7A9028666609EC623
+:103D30003E6C025BEA2F8D9CC4B841F3028F1E03D8
+:103D4000B8074A35924FDB821A9DBB6D96F4D15C61
+:103D50001E2413487F3B431A8DB7ED8F8A17F31744
+:103D60005E1A5510C079BAFDB28EEDBF959BDC7717
+:103D70000B9EE34F61E14330DE8A3D7B3CE97EF8F8
+:103D80007E340E00BE40EC69C680AF378EFADD523D
+:103D90009CCF3795513C064A3353BED837DDE27C81
+:103DA0005A1D0A219EB6FA64D207DDBA47E4A1265D
+:103DB000075AD0CFAD93D9369877C3E877B620D8D5
+:103DC000EAB8B21D6550DF5957E6C54D7AFA950F2E
+:103DD00042644FC03B0405CA8428CD1CD89F4E6F57
+:103DE000D838DF799B620CAD4362C5FEEEEA91DB09
+:103DF0006DF20F84903E3A264DAEBC05E6EF9D5421
+:103E0000301AE7DF5E73D4860F45B7C753140C38FA
+:103E1000A21F5E97A4B8DA06D9D85106EB0B887CAE
+:103E20006B00B33292967760C1A184611D1CAE8491
+:103E3000C2D7C30AE0796E5D2296E4EB3531EEEA33
+:103E4000F32543E82F2A75A729DED6E94F2EA2BA1B
+:103E5000030E6BFCDF6A565E00E71B9FE09BE649A2
+:103E6000DF5E4479E4551AED5BB76B6801D6636B8E
+:103E70005DECF10CF19B0D829FB7559E3F2EA3FA8E
+:103E8000EC70747BEDFEA205CFFBA274C2D1EC1ADC
+:103E90001A9569FF3EEDFC175AF7E73D5FE708F911
+:103EA0000397BBEDFB1010F2BC79CAB743782E6EB6
+:103EB000C1D329C13ED47CFEFBD03C85CBEBCF7B6C
+:103EC000BDFFD3C6FDBDC6E32AC0A7B3CB31CE38F4
+:103ED000667208E3B53E2B1E1D8E537E5200E3D161
+:103EE000D4CB203DA4EA7C0C456509E44339FBC3EF
+:103EF00004EE9352AD190AC9D9CCFBAE8437515E9A
+:103F00009B933F2DB8E96FB2301DE8FCD06BC5A77D
+:103F10000D7532BF2F81F15F8559E7B33C3E6DF5DA
+:103F2000572B648A4753203B6D1C15F4309EE328C1
+:103F300018A7CE1B3EFF7753F4689FBF88C7C715ED
+:103F400095FB81EF491C1FB15715CAF7EC7A9ECB40
+:103F500037769C91FCEEAA35E85C6507FC8FFE4342
+:103F6000ACD61747BA551CF978672AA787508E5ADE
+:103F700071719A8F9F0F509C1BF314296E6EB00ABB
+:103F80007CDF2D40B3C651ADB87CE59A49D8CE6FE1
+:103F900030CF73B03E7F1D4B5C02F006DDAD5B2F72
+:103FA0002FCD100FAF5CF38D2761DEDD4F4DFFD5B8
+:103FB0009350DF25875FAD8376F95FAE23BC3AE38C
+:103FC000E1DB2A655347F9E0F31DC27D051B9AE842
+:103FD000E2D61E2986CFB37DBE837CBF5B430AE257
+:103FE00005F424E2C5EBCC8B4CC77719C2B17360E2
+:103FF0001EFCDBBB75DE329C17E1C6FCCA15BDF5A5
+:104000001AEA99E012FBF985BFC95EF756D9E1DCDF
+:104010002AF6EF42F4EFCC43EC31E72D42BA3D13E0
+:10402000D418CA9B8D6BAFBE91E4FE76858D2BCDE7
+:1040300040BF8E75756A2ED2FFDD46FDDE0AD41BA9
+:104040000D1AE5F574C7BD714CF1DE5E973A37B1D4
+:10405000D9EF86C6CFB16AE4843B931D2FCEC70249
+:10406000E219739C8375CF96C9AEE9EEE1F358E38C
+:1040700075D7BDE5413931D2B84F8F318FB8D19E58
+:104080008AE65DD4BD8BFB36BA385D4FD1E252294A
+:10409000DAA3FAC24550DF3C4E267B8809FFAFFB0E
+:1040A0005A7E9EF8B066D8EE576C9AB292EC869B18
+:1040B000DCBAE02FB00B27A4EE5B1CF09A2FB8E11E
+:1040C000B9FA1C8C04F6C07BB9E11B912E1A831F30
+:1040D000911D756B91AC237DADD8D348EBDAACCB99
+:1040E0002C8176AFDA4A466A136B35F13C00133502
+:1040F00091EEE6C01B99EE45240F75029C73C61520
+:104100004EDA063577512BE5B1341A12F961D70131
+:1041100066501EB4144754A90AFBCD7F07EDBE3983
+:10412000C15219FDFDEB54D6A0A5D9E760171F7346
+:10413000A7ADEBC4B83D41B90AE7877970FE451ECB
+:10414000BA4FE046FBF8CA947D3C1111996627FFEF
+:104150001A8D4A8C6714257E4F79DEDF4FCA382FBF
+:104160007B81556F933EB95F0DFEE52F713FE3CC28
+:10417000E8C754C3CF1A97F8BA26F649DC5B39EC86
+:1041800089FC06C7B7E20113357EBF79730B0BC7F5
+:10419000D2E22A9B9FFFF3E368AF5AF197737977D6
+:1041A000024E0BEE4D12CB223DEF89FEC19DEE1764
+:1041B000B364D9DC099F1FDC19F2E57CB5C04F63FD
+:1041C00005FFE4D55678516E8EC57C1FDC87762EB0
+:1041D0004F4CF82F3DDF4711CC170CB7F6CBC6700C
+:1041E000B9A4887B5340D712DAB1CE7C2005F37E88
+:1041F000260E971B0704FD5FE211F93F93D964EE89
+:1042000087DBCFAFFC4BB9DE67AD7919EFA17E5FDD
+:10421000E8FD17855F9910F71A8F8A7B8B2FAF33D4
+:10422000C8CF7B655D259503EBC2F4FCB57575546D
+:10423000A6EE57F179F3851DA662500DCFF97D2CBE
+:104240006E00BCFE516B064A91CFEBF8FDEEEEA678
+:10425000535BCAC96EE4E7169B8BAA1385E8BF00BF
+:10426000ACF95077F9FA3CFC9E97395859C0D51CE7
+:10427000E2FDBFFABCC24917BAB5FF8EFDF6B156D2
+:1042800086F22E60DAF73B3BECF46FF8FEBB8A2E29
+:104290006EDF7BF11FB08F5FB2F6FD6A7635FF3EB1
+:1042A000C3C5C963E4A34A2107C6003F1D007FDEE2
+:1042B000ADF07CF57C9EE76A8638BF992AAFC7C609
+:1042C0008BF62E4E426C208FE7B517F3F304EA8786
+:1042D00079E5F81EC3922FF0F816CB11F9EF63C5FC
+:1042E00038ABC5B813ABE9DE2E3FFF677D3A963E8B
+:1042F00096A47A2EF0019641D62A2132C7B041F217
+:10430000B78BA521AA1B929E85F532295CC6FDF0CC
+:1043100038E9CF72C5FC7605213F22F3785172311E
+:10432000D993A097512EC6D5C822942F1BDAB4304A
+:1043300060E25C9E1CDE9FC372435FCD009E7FC423
+:104340006232C91FE53996A55F49F61EE9AF0DEB4C
+:10435000F30E6653BE4692F2DCF77B4A6D7A6AA290
+:104360006FE1753AECD746914FE782FE2C43FEA9E8
+:10437000954F07E396647A6F951BFDDAA24C7EFF9A
+:10438000C31E49C43392A3290E28F6353E55CE7874
+:104390009F719F87DB358F9666B6A7197B90C6DB2A
+:1043A000EFD11DE3265BE8FE8CCEE31B592E93F282
+:1043B0006B36B6F17BFA16FE46835D8BF6F0C6BE11
+:1043C000F9B391BF63952AE59BC3FA7D883F97C8EF
+:1043D0004BDE383E78309BC7254A514EF723FE6AA4
+:1043E000D3F0175CD984F8EB7895E7F7823EF7B104
+:1043F0000CF98616FE5C3EF6C54CEFADB26394B682
+:1044000028D3BDE1A31ECB4E4F96723AE1F8CBBA4A
+:10441000568D646A9F10F82E2963D1F3E1AFDFA3B4
+:10442000DBC6B5CE7D9511E25D922F4171AE891A42
+:10443000B733362CE678DDF0FC35C7A369E710BF4B
+:10444000C421A7A4E2C156DCD8D29BED9EE83F7AF6
+:1044500046A5F425FB3E23B9CB5EF01CC47DCB7092
+:104460000E71CA539BE11CA2E7E2BEEF3256F0ED9B
+:10447000A12D47E7E13C7F55C7C8BE0A3CC3E7CD45
+:10448000D5595C2EC5EF149812C659AE89E8F56867
+:10449000BFB9DA9989F9336345DCA6B0BD4F41BA9B
+:1044A00008C25E164A78AF2919C3EF998CDDCDC8D2
+:1044B0004F540B67AE5A6F08519A961FA5B0A17E54
+:1044C0005A5FBB663C5E4A60FD14F5C318F13ED0EE
+:1044D0003EF3572837C744A294870BFD627EB42F62
+:1044E000041E0BBC9C6F9737842509DA0783498A21
+:1044F0004F3AE5FA18C0CF2569F65B40D4D92A2E89
+:10450000A765F80FF57C7EC42EB7C739EE45071CAA
+:10451000792FB95E91EF6EC9ED22BEA913D441394E
+:10452000935F9ED2AF0EF8508655A7FA07ACFA6794
+:10453000840F0881E8D98207AF52A2DCDDE3D2BF45
+:10454000F214EAE77A8DE79189FB72D902EF3E74A3
+:1045500098A1DDC094574CDCD71D61FE5D9A3353A2
+:10456000E7911F9A5D67DDA7E3F795A18C619C2E0B
+:104570005BCC6FDDABCB66C69BE5400FD96692EE98
+:10458000D5E9D677154C96C03C1CDD27531E9DEE11
+:104590008B907CEA59E0D1F13B1F9AB8A7E712F75C
+:1045A000C7B3CDD374BF2E7BD8FAF8FD3A0BEEEC2F
+:1045B000ACAA37CB0DDB3CEB31BE0D6B1F9DF17E02
+:1045C0005D1DF793B24D1E87481B9FEED7ED985A9D
+:1045D00066BB5F47F3A01F27E8CFBA67E784EB5CB1
+:1045E000BF9ACC76DA84B0DD8EB8D0FD3A57C8DEFB
+:1045F0007EC705F2B33EF1FD3A818761ED1CF6A05E
+:10460000CBB24347C90CF7EF4C834CDF11C9FD28EF
+:10461000199921515C82F4BD65E7E5F1A1FEDBD972
+:104620007979565EBFC3CEB3ECB7DCD9767C3BED6F
+:104630003E775584FA5CAC9DB70BFF01F4F290D73E
+:1046400061E73565A60FA7BCC86783BBAF84718ED1
+:10465000D6FE48C17CB55DB9FCFB476C987FF0D6AF
+:104660000CDA171FFFDED1AE29FD2A7EFFE6774B5D
+:1046700019D949561CC12D60DE5524AFA7B07BD790
+:1046800043849FA0C043137E80AC8670151F477C77
+:10469000667A316F21BF8951A3C28A30ED3B7E9685
+:1046A00040A64B5B3115F5783D62250D4F333CF646
+:1046B000EF0434EAF98E7DB4EFF3B973F007F9F73C
+:1046C00014E618F67DB7FC24346771BEEB2BED744D
+:1046D00070428A0C2AD0E5E9AC5261FF0CEAA82F9F
+:1046E000BBD7BAC86E7C6849D9D62BD15F0DCA3A00
+:1046F0003F8E1C1A87F651F351D38B76DEF6C874C1
+:10470000EF3878FF50871246F3F0A9256B5EC57A23
+:104710006CB78BECA0A7FAE615AC48E3BBCDBB1792
+:104720002C5C8CEF3B5CA4DF57ECB96FA03488FDA8
+:104730005DB5E9DF9B6AD9789F8E7EDB1BB5DE8C89
+:1047400076CCD559DC2ED9A82529FEB4719EC6D0C9
+:10475000E5DA58523F7A05DA0FD76819EF93DF95FB
+:10476000E5E6F7F95CAD12CAF7C268E67B0156BB15
+:10477000B135BFA5738CE06C99A11FE7BA7E9E8C02
+:10478000F587605F7529454F79829E3616DDBBB58A
+:1047900002D73790F9DEA155AECD1AC7E93462E7EA
+:1047A000735761D3685CB7CB1D19A847E22A94758B
+:1047B0008C8BB8DCAD919BD11EBDDA8514CE3677DB
+:1047C000FCB06111EE4B58D2259827A84656119D92
+:1047D00005B318EA8386259156C44B21E83F0CEDBA
+:1047E0001516FD92CE290AEB34E685BA67494FC209
+:1047F00005EF3D15D1AB10EF2FADE5DF79290CFAB0
+:10480000E85E5061849FC315B6BB199A0C1BC105A5
+:1048100076917F20519CC8C947D6BA9A977239BE03
+:104820007BED6F4765FADE4C455619E1D56BD8D75D
+:10483000ED41BD0BE34C35079710BE6BDC2C4EFCF5
+:10484000EB26FADE55EB22B8764D39F91584EB7775
+:10485000BFCFA2FDBE969912C2953FC4CF59AD7984
+:10486000F29B06151E0FE77CE8E43B8B1F9CF0EDE6
+:104870009C3D8FCEE336B3C1F988EFD85999E868EB
+:1048800073D11A6F7A5CB455D01FEC03C99798CED8
+:1048900068BF957F65EB311F76E3172395C81F6FBF
+:1048A0007BF9BDD5FB966AB48E87E66A146F7CC827
+:1048B000DF4A747F6AA32B7C08C151F585B89FBB82
+:1048C0008B2BC2186FFB3B3C7C4EF30F768FFA525A
+:1048D00025E2F38B7FC8E2E34C51AD717E46F45E76
+:1048E000EB25386728ED3F5B8176E8127932E54E9B
+:1048F000AF5A42F2CB25E4F8CB4BF2EAD14F09DCB8
+:10490000B09C7179C8E31481B5D5FC3E8343EE2792
+:10491000EAD4DD33689778FCA75EC8BBB1374CAFEB
+:10492000C775D60BBD60AA99BFCB982BDA170E4579
+:10493000D0241B16FFC915FA63EC6EC773A117725A
+:1049400087C5C1072B6E06F9F3A52C61478E10F7BA
+:10495000D9B5641EF1C319E0078A4B979C24FA8FDE
+:10496000819C40BBF90D29195A91761E667D67EE30
+:1049700027221E14314B294FF82D110FFAA9F8EEFA
+:10498000DC3B221E745CC4837E2EE241FF80F1205A
+:10499000FC7E98F772DAB771751FF5631C6767CDF7
+:1049A000028F01E34CD5075F4220BF680EFA44FE38
+:1049B0003DC11BB4F4D0DCF3C7A91208971BE35226
+:1049C0001CCE97C5F7E85E11700D08B85E137059DC
+:1049D0007A10E506D2191BABEA99E461506D95F0A7
+:1049E000BC17E5457F90E405CF130FAE918C09C34A
+:1049F000E5048C373ADD4EB7E8EFD4281FD1B17308
+:104A0000FC47B3F8BDC397D6CEDACF8269F228B29D
+:104A10007015D25D3EEC0FCAA3681397E351BC77C3
+:104A2000912657AD781AEC4898F4CE0D1C4F23C947
+:104A3000970BC99542875CD98D7205EABB51AE04CC
+:104A4000D3E54A6B3FAE3B887285A5F45030F2C97E
+:104A5000E4CACFBC65B63889255FAE0636263B3141
+:104A60000CFAD4FFE9F5E9DB424E5C48AF5AF91F76
+:104A70000193915EDF837921E8CF8C67740F473112
+:104A800007299F28B7DDC5301F642B76198DFECC12
+:104A900042CA07D931DFA3235D3C2C254288CF7D54
+:104AA000528F97EF8BDE8FF6C2B6093C4EB2E38F82
+:104AB000F778D1CE7EE9F682009EE3F4E65A7920BB
+:104AC000FAE25BA17EAA91119DACD8B3C296F7F031
+:104AD000F3AC3CC2476E0CE40FE0E3E1DBB9FED17E
+:104AE0000D9E070265C63C10B74FC483D45808E931
+:104AF000639B14F5501CA651263DD51BE6F92BBD32
+:104B0000E097E3F9606FC3CE39A89F37DC2A33CA38
+:104B100017AFECB907E54CC7848506F2A56B74D9CD
+:104B20009B688E6FF0C9DEF43C523C4ED0AAF9B9B6
+:104B3000A128CD1C0079B3D734CE777F54157E1FC2
+:104B4000F6779F270FBE3337341AE304BD8D0B432E
+:104B5000386FEFA848288FF253C6903DB071D4A6A5
+:104B6000C5187FEA58AEB1743B69D87C41BB7D6DF6
+:104B7000C519D5069E3FD22173FF32579C4F035F64
+:104B80005522DED2D78970AA26CF1FC1F52A7CBD57
+:104B9000F47DD3DC06F00FABF8FAD17FD57DFA684F
+:104BA000941F6A03CF1FD9ECD717A3DFE884C31A79
+:104BB000FFDA6CC9E61FE956DE42FD1A7E8E58C444
+:104BC000F3167A5DE7CF5BE810F2D0F21B47C2879D
+:104BD000CB714EDDEBB5C7012D78AE14A5138E91C8
+:104BE000F2053EEDFC175AF7E73DDF4879046BB25A
+:104BF00025DBFD8A5C2B9FA5714D08E58405CFE67A
+:104C00000BE48F7C5AB89A1B79FBCF7BBDFFD3C6D0
+:104C1000ADCFE6FA11F87400EF51764C9C19423989
+:104C2000948AC70C0D94A33D27EE335AF9232E9D89
+:104C3000FF5355F977EEE4EC22FACEB23A9DE78FB6
+:104C4000D05F863C904D8CCD467F4715F11B279F4A
+:104C50005E087E67DEC8CD3EE137461DF3893C1114
+:104C6000E6C83B51433CBFC4CA27E992607DC154AA
+:104C70003EC888F33AF0365EC8FDF71CFD87AD3BB1
+:104C8000CCEF575AF927C3F248A6CAFB710B86E549
+:104C900091887C949E5C23CEF3C4795E09AA4D8CE6
+:104CA000E70DCB23993A3D84DF949C5622FADDC070
+:104CB000E8FBBB3D5E5EEF9DC3E2F8BDB35EAC2397
+:104CC0003FD532CA6B19965F32750DE14963916524
+:104CD000FC7C879FF75B7870E6975C90DE2E9047B0
+:104CE00012F459DFA388D03C3DFEF04FEA083E990C
+:104CF000CEE30BBE743C9C3EFE253E2E277B441E1D
+:104D00005E4FAE3D1FEF3EB12F15A29D737FF52282
+:104D10004ED75DF53AC5DDDD0D3C5E39EC3B103517
+:104D2000767FC019CF3B21E4F585D6EF8CEB6D1B68
+:104D3000E1BED9021FCFE37A68C921CA8B3DB30A0D
+:104D4000F42CE0EB61CC67A9B9F87C96D7B3783E38
+:104D50004BAF51BFF052D463518DA13CEDC57C16D1
+:104D600078BFA161847C16114FB4E2A323E5B3E4BC
+:104D70009E3B8FB7E7B3F4DECAF3597A7BF83CD693
+:104D800078BD0DD564678D34EED3634CD987FB5F56
+:104D90007171E7A7D34A227F86F92B3DA59AFEA021
+:104DA00081F4C2E9B9AB5123FAEE72713F36369AFB
+:104DB000FBCD4C8D8716429B2DFEC4228A278BBCCF
+:104DC0008C5E717FFEEFB30C9B7DDCD9F8DD10DAD1
+:104DD000F540872FEB9C4F689C7CB5743DD880CC08
+:104DE000ADB798E8530E64F338822B746CA02E8D07
+:104DF0004EB7087D87F891013FB9D2397C45E5026D
+:104E00008AEED3DF1A419F6F64F3F92D3A64EAA466
+:104E1000303FFF631528472CFF75583B0F6F374C09
+:104E2000FE38E4480FE6B761C592273758F2C44E02
+:104E30009796FC600E39734E9ECCE176FA39790272
+:104E4000F2033F75E69443BD5EAE2F2C78DC2898C4
+:104E5000418EBCE70ADBE2344EB973213EFABCE571
+:104E6000CE4BD9F9C2FEE0722788B4817C936D9D48
+:104E700023F27B0F67A63E48F2D0A3F2757B228C0B
+:104E80007E2700EB28CF3D788E9251AE574B146FA2
+:104E900010E722F9E2FB830FBBC2949FF630F03398
+:104EA000FA79130CA77D76FE7305E779D2C36BBF41
+:104EB000C6FD33C037FA5D172B872C39F161365F99
+:104EC000F739FA32399C167DA5D1337D5FC0A25FD8
+:104ED0006B5C8B8E193268C179E855D03586A32971
+:104EE0004E1D93E21807B1F2C8ACF1DEF0717B649D
+:104EF000A4FB5556BBEF587ED7B978B01ED0299F7A
+:104F0000AC87EE9BB32E4E7F73D86E754D15E513AF
+:104F1000A88CF2092225E8CF1CF6D9FD622B1F6C64
+:104F20005A493884726283B0D3AD3C322B2FEDB036
+:104F30002FD73A67B6E5A76D18E17EF69BE7F073C9
+:104F4000F1DF3FC1EFB6ADF69A8FA35C047C99E226
+:104F50007B4E9487668DFB5D81A7D73DE693BECFE0
+:104F6000707FF2C52C7BDE55A7CF70C405385E2755
+:104F7000EAB17ABA8F17E5F7AA9CE7EA23DD7F75D5
+:104F8000DEDB3B77FF559CBF377BA22F13FC2FF254
+:104F9000FC373D1C3DD8C93EBFF51CF09A3FC1F11E
+:104FA0003B057F4F0BF27B3BEF7BA26FE3F3EB18EC
+:104FB000F7AB2D3BE730B683FEFE97416A03BD6C2D
+:104FC000AAE5F45A54C9E8FBE3D35B797DC752FEE6
+:104FD0005DD3FED7F9BD8F6D51FE3D53E8D7270352
+:104FE0005E768CE7FA707F15EFB71FEF37219F567B
+:104FF00070BB2B0FA3F70A8AEB2895D36B7ABC13EF
+:10500000E0FD81A532C545F708BE083093E21CDB00
+:105010002AF93CBB2AE427C4F76816DD02F5CED98D
+:105020002B27E3FD92ED229EB26FF1CA2730AFEF3E
+:105030008340B9A0BB04DD7BED397E1BC5471E5AFA
+:105040009227AD8435EE3B9839BFA5CAAF8A7E3131
+:10505000B788278932A161B9D51479ABAD4C7C8F63
+:105060003DA661FCE999419EB7DABDFA99633351D7
+:105070001F57CA9467D63578D47B19AEBB8EE7F537
+:1050800014A90929DD7FF1FA5DDC4EAB39EA31AABA
+:1050900086B77F66F028D1DD76C0BB92E6FFC902F5
+:1050A000CE6EF427A0DF5E57CFC04C68B7775C9E0A
+:1050B000143352ED46FB39FF752F91C577E8197D02
+:1050C000C7A1D33CE541B9D989E71FD0BEBBC6CA49
+:1050D0004BEDA17B597BE74C9E8379E2DB6EE0C10F
+:1050E000D2AEF021F2937B6673BB6CAF04ED605FD0
+:1050F000F6B568D7D33DA6561E278232639CA81703
+:10510000138111AFE2DC8E525F60DECE86BE019C61
+:10511000A7A88E7FDFA2A82673FF17026EEABFCF73
+:1051200015A3F8E748FBF7AF3E8ECFCE2A7E5EC0D0
+:10513000589CE252BB85DFC5D4A891FE9DD0960055
+:10514000C7CF4E1733315EE6ABD348AFCB6183ECAC
+:10515000503FD88F188FDB26C516637E486C92C6E9
+:105160001E278C98DE7118BF9B901746FADB24250A
+:1051700042F85DE5D8381EDF3E1AD949F7AE0E80F9
+:105180001D4DE16096203DD51DCDA3FB504723D595
+:1051900083D4DF57A1BB2D8D8279F3F4A148C626B5
+:1051A0005DB6692BDA359D53641DF3363BA5FA28AD
+:1051B0008E17CBF5501CD935651EED9F6B549E9410
+:1051C000AE8F6EF473BD30342172A31FD6159A7260
+:1051D0002A17E396DB6B5FD987FBF7C8FD1EA2A3F6
+:1051E000476A07EFC679F69FBDEA7894F8929FD791
+:1051F0003D5A7BBA14ED9E5D4DA772117FC5189F75
+:10520000037D585CC1E368A801C93E537BD8CD80BB
+:10521000C7E2368D1969FAD8CBF8791EFEF92693C4
+:10522000DCA3BF67064F795A70BC252C7169809E3C
+:105230007B309E65C999E23A96280079B87FC53BD4
+:1052400031CC937B646201DDA32C12EF4972C278EA
+:105250002562BCFE375E598FED1EAD2E30505E14B8
+:105260000F0CCD4325515C759AE26C21EBFE47D4BF
+:10527000D87F2BD1A74CDFA92C0EBFF317B88E8097
+:10528000AF8FF41CB4A7B899731D8189E67D7EC0E9
+:10529000E337A5D657C70553FE18FD213FDECBEFF8
+:1052A000651767FDC35C252DDFB644C40536498309
+:1052B000B3C92E7D80DBE163599CE45C7155EC6ED3
+:1052C0009E6F1BA57C5BE7BCDBFDE7F4AB44F7A856
+:1052D000F39BC4BD12FE3B3625E2776C9C741F0A1B
+:1052E000E557755C95AAEF8B9E22FA7F5A33EECA7A
+:1052F000F4BD877D422E6C12FE9835FED85C3EBE12
+:10530000557F54E7F4F8F4CB79D757C17AFEAAADAC
+:105310006C12C63F778CE0C7AD0C70FACB1E000B49
+:1053200007F440FF6BAF79319FE56999AD4239557C
+:105330005F95F024AB041E617CF2C560FC03E16F55
+:105340007B502E7D35504970AD98CAE3069D550FB0
+:10535000D2395048E77A07F913E5BB2F149330EEA2
+:10536000BDBC86E98744BC2506F8A7BBF3324BE5F4
+:10537000F56FCF253F077885DFABC1DCA4C9E2F725
+:1053800027CAF19C68D3DD227F56467C778A7980D4
+:105390006F699E0345629CFBB8FD8FFE05F62F17D3
+:1053A000F394D77DF76BA8C78B744E1729F8FA3C96
+:1053B000045FABCC083E35F12AFAA1DB271518486B
+:1053C000370742E1B79BA0BE7C914AF1F8F21A0E72
+:1053D000C78156997E0FC85FA71DA4FB6326E88B83
+:1053E000347C1962DEA29A8484E75A462B5F17B494
+:1053F000F3A25C34C2000FD40DB1AE73F04FD208EB
+:10540000FE22CF20E6169DC3C34A1C0FE877651D18
+:10541000EFE70FF56D4139B6BC8EC30DFA9DE0295B
+:105420000A6B0751DF1785F878CB013F87A4145C1E
+:10543000D9165C7532E55F15D56807D10FCE16F029
+:10544000AD0C7378FA5F3F3520F1F10C1C2F5BC077
+:105450009B2DD64F09BB05423FC0784FB912F57856
+:105460002FE7D414661CE2B3513CCB7ABFAB15F0E6
+:1054700000F8F18B79D86E37F1132C31F6B1CC7F6F
+:105480003FC4488B5B54ECD66C75BFD83FD6C59FE4
+:10549000931F472A91D765E1D7ADACB2F763356961
+:1054A000F532BC5FC6E97DFDB5FCBCE3C0046E1FF0
+:1054B000A1DF718EBF91CEA7188F7505F1BD46FA99
+:1054C000AEA4DD3E6E716BC174940FC5030FCF9314
+:1054D000613D45F73259C9217A96CEC93F98EFDB35
+:1054E0006B12747F367B209287F2AEA4356F3A7EC2
+:1054F000FF2D7B204AF5EC815693E79F810B938724
+:10550000F97A69F394A29CE6F974AC55EB43B95669
+:105510009B0E27BC2F79B9672EF6DF7CF72BA39162
+:105520007F0B1CFD3D39DC7F287E195A0570FED3A8
+:105530006BB1BD15DFC94688F3A87C19CB621FC8C3
+:1055400063284B44FE9D252F3A27BC3329EA13F4E8
+:1055500043F9782C916EE73B4B683F5EB48F49E787
+:105560006D779ADA8D146F1A08F0785340D8AB3DF6
+:10557000CCD84FFABD86E77BF8F039E88FBE9AA306
+:10558000D3693FFB5818E9B9B8ED4FEE74797D73D4
+:10559000A054DC834E10DD6B255974BE077C4CDFB4
+:1055A000373DA0B6D2396B5F113FD73C3AE71509BA
+:1055B000F159F41CCFD3B6ECE5E93589103EEF7A0A
+:1055C000357A19F1E708F6A7656F3AD77349FD8375
+:1055D000240FC6469917CFD7FCAB55CA632D890255
+:1055E0005C55281780A40B01FE9AD87AA41B23CA05
+:1055F000EBC66A51AE82F26AB06FD70D94FFD295B6
+:105600001A776B05D8B5683F0DEEF6DC80F64A2BAD
+:10561000582306DA8BA73CF83D95EED6E9F988E7E2
+:105620006722967D999070FCA29F9A642FD6EA9A81
+:105630008E719809EEC4E8F473BA0373DEA9A6EF7D
+:1056400089CDBFB87CB291F409C222A7E991FEAA24
+:10565000A3A45F9EF08F273D64E9154B8FD088206F
+:105660005F6E117CD465243C12C92BE05D80F3167B
+:10567000942340C7FE222ECF410E733967E993BBB6
+:10568000B9DEB7E4678518E71694B7D0AFBBF689E3
+:10569000DC1B50AE0839EB0F1933F17CAE42C85712
+:1056A000A6C6249CEFC014FEBDCA80439E56B4F229
+:1056B00071BA428CE809F4D041A49B034509BA278A
+:1056C0007EA0F5A8947ECFD4D27781D624C3FD1FC7
+:1056D00057C7E5E0382157BFE337387D7AB85C3DDE
+:1056E000A7F784BCDD6A1E65E2BBB019F3B0FE5EAD
+:1056F000E8F39E8A43E4176CBBF514E1D38A8786EE
+:10570000443CB4BBEA2D7ABF3DCAEF01EC32A7CFCF
+:1057100021F823CB35CA3FAD393AA70CFD8DA6E55C
+:105720001ADA75270305D6F9977721DA93ADABC856
+:10573000FEF5897D7C28CC84DFA9919F75DFD26F2F
+:105740000F60FF10F84592818DFA3C6EA473FC9EA9
+:1057500002E23B3A489D7D35067D07C2B98EEF05D2
+:10576000F87769FDD1E4C038DA5799AEF4F86A18D1
+:10577000F99DCBC1AFC36177AB61EF0478BFBB4983
+:10578000D6D7B354FFFF15E0F96813FDFC9EC2CED7
+:10579000C5A7B7609C6FE752F19D3307FCF735F65C
+:1057A00079149A07630294C79CF17BFB55FE2CFE8B
+:1057B000FD859ABE01B4E703551CAE170306C7FB6F
+:1057C00020C7634F44263EDA3558ED457DE7B41BCC
+:1057D0001FC97E7712CF6BB1EB9B0BD58B1D727FF0
+:1057E00082BBEF3A9277DF94495E31C6E59DC4648F
+:1057F000037F57A325C0E9A94AC8EB0E57623FE6CD
+:1058000015743CEB63EB8D145D1489313B5BE58CC7
+:10581000BF9F7628A0F0FD1FBEEFDC7E10FBFEA42C
+:10582000C0C385F61FC32C684FF7C5378DB903E594
+:10583000782BF79FFB126F51DE51D1EC85E4F71CFA
+:10584000397829F9034555A6EDF735B347F05B2BB9
+:10585000723CE78D078C248FF7ADEE203F7BDF6035
+:10586000E67B3105393C2FAD0FE4257EDF64A4F9DA
+:10587000F51CCE7FFF14107437E71DFA5E469A9E22
+:105880007D59E859D2B7C52A8B2969790E1304FED0
+:105890009CFA93A971CFA53544E784BF7DE2FCE271
+:1058A000215326BC5B748EE7078857588729E890F8
+:1058B000CE377A58DC837C136BE2791E4EB827F81A
+:1058C000E58B5A5F3087FB21E7E613FEFA443F87FA
+:1058D0007B67EDFD74CF11E60B217D483FF88FD338
+:1058E000741FEA5917FD9EED8C675D098C69DD799F
+:1058F00090FFDEA2FCA297E0FCE7C3FCFBEA093FB5
+:10590000B7C77EADF3DF2BFAAA7BB0FB0B501F7A33
+:105910005661644FC6417101BD9E16F4CA9EE3F5FF
+:10592000955E5EBDF360FF321C6FD5733C0FF3CE06
+:10593000E76FBBF10B50BF6DC0457706EE7C7CBDB9
+:105940003606EAB7C7A53EACFF663AA3DFFB8CE597
+:105950006914E7FA4D60B06001E0FB83751E665C78
+:105960008671D2C182F980873BE24FCFC47E773CFB
+:105970002585916D673CFBF82BA301AE3BBF215100
+:10598000FED7578E64DBECC2D3B09469F07ECD4174
+:10599000FEBB91B7B19E99888F3B1FEFA5DF3FB447
+:1059A000F0F9C1BA4A66A4FD6ED89DDF789A7ECF21
+:1059B000F0AE6F49F4FB8A77C9FC1ED13F3FEF5D23
+:1059C000F4980FD7B75EBBD48FEBDAAC61BBDBE2E8
+:1059D0002DDFC594A63BE207B599F0FE8E0307B50F
+:1059E00095E897B95933EA9FAF1CB9C226774EEFB5
+:1059F00053C83F5893EBA1FBF5CC6786E64D18BE24
+:105A0000CF1FAC6336B8EEB0E2046A5C9B9BD6DE77
+:105A1000A573FFF72B4714DB3C961D103BC6F542E0
+:105A2000EC6FFD143FB7F66F8DF0BBADFD5B63050A
+:105A3000E2D5A1C999E0E9C6FD00787AD6E954EE2D
+:105A40005C17A272F73A83F6692FE211CA2E01772A
+:105A5000602AABC7EFF3074C9E769CD764D6E3DD94
+:105A6000B2BC08AF172C89921F32921D63957B5DE3
+:105A7000D116F4213B77F4CF52C1EED9AB45EFC636
+:105A8000C897DEF1EAAC06A8FF4D4E64630EC99BD1
+:105A9000B0817C67F9E75FCFE17277D3688DF0BDA5
+:105AA00077E9E4C714CBFFC2B8DFD2954FA03D0120
+:105AB000FDB7E710DF86E93B5D23F52F585667EB0E
+:105AC0005FB06C95D57F0FF5F79CBFFFDE65D7D82B
+:105AD000E75F7687D5FF1182DF777EF80B9AA7DA2A
+:105AE000E76F5E4DFDBFEAE6FB3B94EBA17CFA0E4F
+:105AF0006F38E122FF99D1F739D4BC4B0FD1F7931E
+:105B0000CEC599064DD4B3BEA772AB518EA5E86839
+:105B1000FA37711D7EE0AE743ACAA9CBB2F155AE28
+:105B20009967ABE7CF1E636B3F2A52667B5FB8E88D
+:105B300072075DFA74CA83655C9F9A18E70438B5EA
+:105B400031FC7B4DF5633CB4BEFB5FF452FDFE6B54
+:105B5000F8FAEE1FE3233E26DD05FB7EBF16BD32BD
+:105B6000DD3E86754918F27A468F0EE4D4A63F379B
+:105B7000647C9EA5F0DFB1CB72737DB9B974F2631A
+:105B8000B1347C6E29067A80FADB399A2DCEB3B90E
+:105B90007865A8256D9E4DC5DAA24355FCF92D68A0
+:105BA000C7EB91BFC3F9BEAA0D5D8AF6AB731E7732
+:105BB000599D6D1E4FC92A9A27E998C75DB2CA310F
+:105BC0008F67D121F15CCC730AE964A47936975DC3
+:105BD000635F4FC91D34CFAF719EDAB4F594DCE139
+:105BE00098278BAF079E8B797E73DEF5944FB5AF08
+:105BF00067EC6A9AE7DF1DF3B8C7AE76CCE3A3790A
+:105C0000F039CEC38AB81FA5B98756D2FEFFC0CBE4
+:105C1000300EA4B9A37F4D9754FEDE4B71616865C9
+:105C200062BBFF03D8CCA6FA008000000000000091
+:105C30001F8B080000000000000BE57D097854452B
+:105C4000B670DDBEF7F69274773AFB4208378010E3
+:105C500034C40E840C203A0D41061DC0E00A2ED03B
+:105C600061C99E74449C87A34E1AA28888DA286A68
+:105C700050601A04071CD0C0040810B001757006EB
+:105C800035BEE7B8CC82CD2241884983A8F866F1B9
+:105C9000AF73AA6EFADE4E079837F3FF6FDEFBE3B1
+:105CA0003753D4ADFD6C75CEA953D52427819051BF
+:105CB000841C8CA3E90842BE89715FEDB012F23DED
+:105CC000FCFD90D03F2F21C93C4D21642EE17FFE89
+:105CD000C5022924A4D6CCB273364FCD5A08694BDD
+:105CE000515A4901FDC70A9BF30A8590CE9622E3DB
+:105CF000ECDC707F6A3AD7279F0CE6B0B6DF93F0F2
+:105D000038DE7124A78E8E5F16E7C0F9A8F993F5E7
+:105D1000346F22E4583DC1B45D26338BE9F713F5A7
+:105D2000740283B5F35D88ED4E4AF49F49345D25D6
+:105D3000F8BD025DD7F20F64320087F93087AEE319
+:105D400076BE8CB9BE5842CCE179784CC405ED42A0
+:105D5000BB4CFE75027C75F531A4D1A43191107550
+:105D6000BEFD09F9D3BEC96F0B76CCF6318C24E4A5
+:105D7000CE255BDF826A1F09257DE7D1F54E6B5E7C
+:105D80002EF7A1F94E3938C369D5F4334D3E06EBF1
+:105D900036D3FFA09FE96E9AD78C7F57B93E7F0F0D
+:105DA00091C2F96C42AE72F4E7F8E0E32A7E19F092
+:105DB000753B5D533A45E13D900E836207E26B8689
+:105DC00083B555E7E379502601988F144C26B950D6
+:105DD000928CF5DC504FE939BF19B2D9554CF139E5
+:105DE000E30111E11839DFE0BE5897218FA68D5FDE
+:105DF000C9A4FFA5E73F7381BE9C78D9782A5C557A
+:105E00003AB863DAD8674F68E863BAFB86674FE849
+:105E1000E0345597BFA76EBAAEFECC0525BAF21294
+:105E20006F85AE7CF6927B75F9B9BE0774F5CB1A17
+:105E300017EACA2BFC8FEBCAAB362ED7E56B9A5606
+:105E4000EAEA7B5AD6EACA0DFB86DC44281C1B7E94
+:105E500027121385E3D7D6934F5D9304A9E404B8C2
+:105E60009FAA4F43BA3E5DAF605A0BB4370AF8673A
+:105E7000B8D94DF1E48909959278421EF68D59B250
+:105E8000640CCD1B69F9684AEDBE714BBC99842C3A
+:105E9000712848F762A3910428A90A24A19BAE4364
+:105EA000A2A63C7889F246890486F72C1783D1BFD5
+:105EB0007709A14119741DDE4F4D6483D093CFC380
+:105EC0007C49FA90B4DECB3B0CA4BC49237736382E
+:105ED0000C389F64C7B80D0E4A0FD546C6EFD5DB08
+:105EE000D2C7113BE40383EAAC1719AF894E2615DC
+:105EF000FA61FC52E1EF13E65FC4DF001DDF0F8E95
+:105F000073AF77D0F13AF68BD3601E247030EB96E6
+:105F1000A130BE6B037C272DB49374CADFF5AE6746
+:105F20004F5C41C827F51331FD7D7DF1B3276442F5
+:105F3000FE583F0DF347EADD9806EBCB313D565F47
+:105F400087E527EA1760FE64BD17D353F54B303D54
+:105F50005DEFC3F28EFA46CC77D6FB3155F980CA95
+:105F6000A399C5C0A7C5C506E0D37916C2FF58FEE0
+:105F70001C5F8348FFDD867CED4C03BE3E67FD66FB
+:105F80005006A5B7739F5062CAEE1D4E9174D73B61
+:105F9000FE5C06C05FA99F124F62CF724B0CC38F8D
+:105FA000C54026122A7F1EBFC248243A7ECC1B570A
+:105FB000AD13B3F1BB04A443370EE7545B94FE0763
+:105FC00012C4D7A5F0A4D63FF9E29F0B67E5027E85
+:105FD000FA239DC41C14EB18DE5E7602DE2E053F0C
+:105FE00089F357241C8537FE9415A4F5BF4C56E160
+:105FF000D99645687A8BA3F814D0C1B96613AEEB75
+:106000005C6BAC9F401F8E24A48BDEE1C6E651B5CD
+:10601000D1E2D3CA879AA6789F5E5EA4FBB4F2E26F
+:10602000DCA197EDC0F7F3D244DF89E1401F2E4E8B
+:106030001F8CEED4FE6B9AB27D565D3FFAFC399F01
+:1060400030B109E5BC1277EBD0DEE7392FCD88E31C
+:106050009CDE38200EC63D5D6FF6C1381DF50E1F63
+:106060001B37CDA7A5CBEA05B1BE1389E1F9F5D65B
+:10607000EF3F7B7E843493E36682A0FF7E40EFF5A2
+:106080007BC58774DE580CF4D12A7F03FB4E4C8EFF
+:10609000BAEF489857FBF534895ED3D5F07DB36EDF
+:1060A0003CDA4E39A9E2A9FFC5F02E9193EA3AA94C
+:1060B0009C1C4A6537D0292566C4B39BF61847FB5C
+:1060C000EB92AC4B043A8E295EC1720F0C44E9A9E5
+:1060D000C61C34BA1504771BE859B346AA7CAFDC5A
+:1060E000F1074A725FFC56264BA1FC2FB4775A2E5B
+:1060F000F3D239A4D84EE878B39AAB26819CFC62DF
+:10610000C78FB99EE22B84757F490C13814FBE2443
+:10611000FF6E1FAED1CBA6C41BD9FC96B0FDD94BE8
+:10612000FF83F5513D4DB75F9735EAF3A5E4E614DB
+:10613000E087D21532F1D3B957C07EAFAE9BF2FDE6
+:1061400075F14C8F2B23758B414F592A936980EF42
+:10615000590E22F5A172A266E7EAC2129ABF2DDE9D
+:106160008074759AEA770A954315094C8FA94CF209
+:106170001B5DB4FC78F3F0DBAF21D0DEBF18E49AEE
+:10618000D7469C1B484FB8CF5EA29FDFA5E61F39BC
+:106190005F4216E17CD579A8FDAAF310370A2E7F5D
+:1061A000147D7676BC10D693697A5FBC5E7F5D0005
+:1061B000798D7EFB70447E51445EA51399D3892965
+:1061C000DEBD203E19E8223401F53442E923375C74
+:1061D000CF18AEF7F0C5EA99A09E88F5165DAC9E83
+:1061E00025DCDF63D1EAD5ECDCB2C34BE9A9F2F5DB
+:1061F000E7EC84CAF32F245F8A937EAFDEF0A81DFC
+:10620000E0744AF2DA01DF5FF8C589D1E0B5AF1B6F
+:106210005E2EAB007604923685FBAB4F4C013DE918
+:106220009B0DB243A4553C1B4D0113A5DFDAE68A52
+:1062300049240FF34759FEB1B322E45BF4F8ACFCF8
+:10624000C573298A0DF1C0F46D1240BDA376FDE738
+:1062500013408E7B4808E930B21D8C7F2101F9BEC6
+:10626000C418D7B39CCE13F5640FE7334FF313670D
+:10627000453BA437B4039F7922E8A8BC7B7F091A69
+:106280008BE97C5E8FB7259DBC8A667F407E00F2DD
+:1062900040850BF133BDA261D30B7947E9BC3AD6F7
+:1062A000FFD62EE46AE508A3C7734DB37FBE5BE952
+:1062B0005DDE7472BB28DCCE8FED9416A607915676
+:1062C0009656CB013BE89DD56B6527A55452BDE59D
+:1062D000E5575E047BED5313DA6B555BDEFA6834E9
+:1062E000CD576D959326B1E5588594307E3CF47F6B
+:1062F0000B8685F151F9ABB78CCA50F6FDA18430FD
+:106300005EAAB6EE3792A13DE158D4B4DF18B44688
+:10631000C14FD3D109A0B7346CFAD608F6D717FB12
+:1063200004929ADDB37DF9DAB7705F0438213E3903
+:10633000BEBAF1D7036F8129BB0BB09E03E4E5A57C
+:10634000F0E6E372BA66A78DC4D37994FFDEE49FCA
+:1063500004F87CED3E3BACA75DAA6374BEFAD11491
+:10636000171DBF5CF6A6383065DFCBD7DC8FF4573E
+:1063700026D4A538909F5CE90694DDDE7458E7DCEE
+:1063800055B7E13A4B891BE9B07CB558ECA7E9D782
+:106390001299B8350A9F1426303E695F47914BD752
+:1063A000D90E7A3FE8DBFF2EFA37A07D7A2F01F96C
+:1063B0007F3F5F33DD2931FFB599E1CB9A6050ED26
+:1063C00045B38E7ED73FD606783ADDD7950AF3A43B
+:1063D00070F072B809DFD37EC50FAE4F6578228AA0
+:1063E00054C8DBD1FDA008BE43FD36D965C9D3B57D
+:1063F000E3F2938D3F9F8F4FE71D03FB5B7B0AD535
+:10640000EFA3AC6F16AC0FF745BACF69E84CC3EFFA
+:106410008CFFD73FCEF85DE57FFFD489507EFE43E9
+:10642000C647D00EF6133AAF402A96EFBF5540F953
+:10643000602281687CBE5EE67CAE2FF7507E053F11
+:10644000814A2774FE9210A7A5173A4E02E201ED89
+:1064500095D215B4BD56BF8171B19E31FC5DB3AF0D
+:106460009471B9909F40E5416C581E9055C997A50D
+:106470004756CBC40B2A67F5A726B4C7ABB7C8C528
+:10648000B0FE339B0F7E7427A5F3334D2ADFEAE578
+:106490006A24DF966FDB20009D46F2ED9972BA8B7D
+:1064A00047E35BFA3D2ADF9607FF9FCA55157ED367
+:1064B00013F4F294CAC77EA042F406C748F9F8352F
+:1064C000E85BC93DE523FDFB9014F6A44395FE541B
+:1064D000BAA31A5C3F90EBDDF4A9D25F377DAAF432
+:1064E00017B95E3DFC22CBFB838D44E9A47817D518
+:1064F000E8283EAB5B05BF09F9DCFB769F0284937D
+:106500000BB737E27BBB4F9236EF8FC83745D47756
+:1065100045E48B23EABB23F275BAFAD52D078D0427
+:10652000F11FD0D5332D78891C8F620FAAFB8FA75E
+:10653000F9ACD10B7491193282DC931751D50DFC53
+:106540006B7B45F4AF7529217B02FDFEA885D969D7
+:106550005D0E9E8F67F950B27131C83DF57BC84220
+:10656000D03EEF2A0ED9E335F6FFD156D1AED0F2A8
+:10657000A09F4CD4FA11C2F369407C07496FE5CC67
+:106580006FD81563CFC3F162B2FC407FD78BD6AC16
+:106590000560EFF94427251F3267E11D7642E9AC1B
+:1065A000AB75C04DD3E8F7B9EF88A06E53F4B8A42B
+:1065B000744A37B3391D9F22DEE7C7D0F5CD6E652B
+:1065C0007AF89C65D1E9BE92D72FB5CE37827CA5EB
+:1065D0007AF431AD5FB4922C43BA2B5F15F1BDF55F
+:1065E000C7C81F9511FCE1E6F6C35E953FF2493E30
+:1065F000CA174298FDCBE5F2F562EE4DD3281EBADC
+:106600000E89C4A4803D2B92C5B0CECD821FFC055F
+:10661000C49B8C7C564B42280F553875001F0DEEDD
+:106620005D4E756CFF53E183402F3BFE90F7124D9A
+:106630003B767C3A680FE4777E9CF507D2B37ED137
+:10664000BEEF66C07ED6B5CF847EB1AE7DBFCE7ABA
+:1066500010F2BB4DE817EB5A6472011F78F7D9FCB2
+:106660005740795F663F34ECFD362F88FBEB23887B
+:10667000B75309CC7E39D7FAE7234212A47455A048
+:106680003FEC8B453EF2ECB6A0BDDEB5F7DB42B782
+:10669000F59FB79E5A2371233DDAC8B46D40BFF110
+:1066A000CC7FECD933EAE58574FC9AE6FDC6D9B413
+:1066B000BCE88DBFE681FCECDAC6F4A24E39B886A0
+:1066C0003809F92AA1EC7119FC7CC04C19843C9D55
+:1066D000B8F1066F6E34B83038745138C0BA285CDF
+:1066E000CA41EEF7068F984423D2FBBF1E3CCECEA4
+:1066F0006072ED0704FC4261B8082EF6DDE6370B48
+:10670000B87EF67DDFB7792077CE342D447DE55213
+:10671000EB1E92F8AF4A07FFD5750B81CB59F7C432
+:106720007F597C33FA7F2F41C17946F2414F3ADFDE
+:10673000F913CCBF6673E27C2F93FFCBFFB7E17DEB
+:106740001BC5BBFDD2787FEC7F2CDEDFE178B7394B
+:106750004C20CFF6FE15FDACEAFA2FB5EE57FE87BA
+:10676000AE5BD5E36F34D41D9E4AEB1F268115C561
+:10677000749E6F665EFFE1545AFAEB5EF4938F12DB
+:10678000991DF86B503EC0FE4B13FC1BD0AE6076DB
+:10679000531161FB7A514E19EA1B45394FA0DE4077
+:1067A000A4BAC3F9141E3766CD752EC5EAC33E716F
+:1067B000D3FC8FD2AF75A2FF30C27E3C2810974029
+:1067C000F5D8A22B6F380476CCF84C3960CAC3F4E4
+:1067D00028A46FDB27B2EF56BDDD3409EC1D8D1DFB
+:1067E0007883A22F9FC0FB9B48E61D9E4AC79F98B7
+:1067F000293AFCD06EAC4F82F54CA2CCEDD39C1F55
+:106800004D88E86F1BD531B5FEB5BF177EE624660F
+:1068100067FE9A8E9F0FF0CB94D17F7849F801BC28
+:10682000115EF9FEA5A05B494E84DF8D19351C9ED3
+:10683000CCAE96787BC9BAB80DF85622D42E667ABB
+:1068400019DAD3AA5DDC1B9C09B7B3253EA40A77ED
+:106850002993DAD9FAFE101E2A3EFE5E3CA8F8FB08
+:1068600047F1F17BC0C788303E32CF3B24E0CF22D6
+:106870006E0F8C3FDF26623ED329E1F90BB707C6C6
+:106880005AE325B007AE953E10812FCBCCBB2AE151
+:106890001CC1EC1490AE077718D0DE31170808F74A
+:1068A0009C4609F31F181C2340D19E72CDCE330F96
+:1068B00010F027BB8C4CF12E66FEFCBF7CFFFD98D0
+:1068C00042F0ABB0BF32FABFC914BE735691400C50
+:1068D0005DE75C897821C4612E5DD4319D3F589F6E
+:1068E00087BFEB52C2FD5CAA7E6F72E49F9DEEA44F
+:1068F00072EBD81584EC829439FB25ADDDFC835610
+:10690000062FCF61E2EF8F72C125166BCED9FE2D17
+:1069100089C98F9D7FDC361CFC6763BB72E3983CA2
+:106920002D30005D7AB85D708E287110AF70AE7535
+:10693000401C9E231E126DEE287E9B4DDC9EFE6544
+:106940003D3A9549D77AE213C16E2221F4DF7AD716
+:106950009BA39E07CF4A3270BAE178A37F62219C45
+:106960005BB0F1E7D2A6715ABC754CFA42CAEB890A
+:1069700007F83BA6395FF947E10BF63BC077932553
+:1069800038A1388AFC98CFE137E5C077E8EFBCB290
+:1069900075AD01E8F7CAF506DDF9647512B7BB8677
+:1069A000916130AF29072CB602C0CB21D169A1EB90
+:1069B000F3B49E35BAA39C7345C213FA073FFAABF2
+:1069C00049EC5C608FDC341BE0BAE74B33F152FCDE
+:1069D000EE32FAAAA2CD332985C9B9B9A4E9BEBC61
+:1069E000EC7F3DF88EEDB206C6819DB99E70BF4624
+:1069F00024FD11A4E3731B891FF653B04B412E9C59
+:106A0000DB4C703FA7207912EC6ACAEF3FD4FA69D9
+:106A100006B76CFD25E801B5AD82C340CB6BA5A0E0
+:106A200011FCB19E967811F6DD7C85B8F07C587229
+:106A30000CBD55C317AF264908DF83A3F7DC05E378
+:106A40007ED56124A08FB8DE0CD961DFFEAA75382F
+:106A5000F2416FEBFA553DA91C2F433F4C1E46D225
+:106A600043EEE6185DFE1AD19D01FC35C5149CEF7E
+:106A70008C82BF49C98CCE2E5BBEF9FF3F936F1F3E
+:106A8000AAF2CD2D166BF8282999D1BD46BEA54690
+:106A9000936FF3042515E03E6FEF8054C0EBBC7795
+:106AA000E4E468F26D4B3D3BFF7B9DF223A45DCD9A
+:106AB00054BE5DAD916FCD54BE65F76CF7B7CB9505
+:106AC0006FFEFF1EFEDB02F22DCA7AE339FC54F999
+:106AD00096D77A14E55B5EB381281ABF9339F952D1
+:106AE000F24D48BE15F4E143B233360AFD6CE1FACB
+:106AF000F7EB3C6E0FC60139F7A364765E7AB97284
+:106B00002E3D85F1C925E5DC7F139C5539376F3B58
+:106B10009573D9D1E890C9B979BBA89C13801E9907
+:106B20009C9BB79730FF5B847CCBE921DF08D6AF15
+:106B30000DB0F69E96EC17EEA6FD0D73C94E33AD63
+:106B40003F2C2CEF4668E5DD8F922584730F797713
+:106B5000E8F2E4DD762EEFA81CEB0FF235923E9CB6
+:106B6000AD31BAFC9E51ED9B7F05FCF2AE88E78B00
+:106B70001F18D839D07BA3DA0B80BE56F2F97838CB
+:106B8000FD75D67BB1FFA237D9FA6A3633FF776D30
+:106B900033D30F6BD78B7E85FE73C2E8EF8C30FF4B
+:106BA0008ABD0249A5F9A926DFF35690C1BF900915
+:106BB0003B172393F235F430676415FAF11B2CF67A
+:106BC0007584F2F11C8998C15F5F659DF005F8E955
+:106BD000AB4632FF7E15FF4E78DC801A0759DA7219
+:106BE000EFDB7D48CFF881292686C7292F0BFEB51C
+:106BF000D910BFA42FAF8A887F7C8AAF73AA1844AC
+:106C0000B890F7C5A8710C4F45C2E31087075DBF68
+:106C10000E1E7E212A3C284627E5A784D75FF16E09
+:106C20007031F8F32B560A78EEABC223729D2A7CA2
+:106C300054FF74156FEF69BD17CFFD23D7AFC2AFF7
+:106C4000C7BA557846ACDF97CCCFBDF2C97088A7DC
+:106C5000A1F480F2C3FB1B0A073A4EF1D82B52B5C0
+:106C6000F2F8790E87E1BEB145E904E046EA807E9C
+:106C70004A1BEF7D3B9DAE7FC427CA30D826AF1993
+:106C80006D72C339EA264B08E59B4A5FED2ABDF3D6
+:106C90007EF664D48D437BBD4570807EE10958103B
+:106CA0008E1E4A67165AE5E0CA6F2670383A4CC8FD
+:106CB000577CDFA17037D0FA13D47D88C21DF866E7
+:106CC00078EB593CCF2D20213C2FA96D149C01BAA3
+:106CD0008EDA16062F55DED23FAB161F51E8518AC9
+:106CE000468F049CC485E17DB08AD79B62F27D0407
+:106CF000E7305328BDAF25613CE6D0FF008F917887
+:106D000052E17929FAFC9CEB1F5B008E5680578874
+:106D1000E95101BA2FD8C2E51EC9AB8363D18B17E5
+:106D2000187DED1514384FE88613D02B2D1FD1CACE
+:106D3000E815E0A600DC5B4B44C89752F82666F7DE
+:106D40005C279C5F6AF9B762EF51D6FF6AC149A21E
+:106D5000D0AFBAEEDEE8F71FA5DBF608BA7DCF129A
+:106D60003A3C1CE876AFC0FC08ADF1BA7347530A51
+:106D70003B77DF64A1F40DE75DEFC8CE754A4F3E67
+:106D8000BFC0E109FABFA2F14B0D8105C059E04631
+:106D900033C69FE13CFA33FD522B5FB75848F2AD42
+:106DA00005BDF76FE4F6406FFA8D9A1F0AE381DCA8
+:106DB0006BA1E3E584C78B94EFAABD7FA97525A6D7
+:106DC000FC63EBEA8EDF246D78FE648A773F98845B
+:106DD000FE1F169F743B8F4FA233403D4B532F2D08
+:106DE0007944EFF5489A19F7E1FB785CFCF5A29538
+:106DF00078E93ABE72C948A77497FEDD1890CBE3D4
+:106E0000E83E4293AF0E8FF8F86E2C17F13CEAA6DD
+:106E100077136BE09CEE261046F4FB4DF902EEBFB3
+:106E20001F4067A3408F3513978993302D1FF98337
+:106E300078F41BE5AFF71529949F866DF43740EA87
+:106E40002C0A25BD07F01B2B12805F9B2BB108F687
+:106E5000AFFB3E27F9A282FB2CF633EC1049867A71
+:106E6000A35DC9680E8C6A5E5104FED1A907AD56B8
+:106E7000A0F39C5506E2D6D0EF68E26F8073F8511C
+:106E8000275CB700FF95537D01FCCEE5AD6B1BEC95
+:106E9000905F253815DABFC7EB9E60A7F3DAD2788A
+:106EA00076C255C087B41E74E359C5EA79D60B4E35
+:106EB00008952D6D5D8EF138A5EB05E280FA7E8197
+:106EC0009859BF7E33ED77CB2ADA9EE6CBA03DF40E
+:106ED000BBFEEC87B7009F1F1659FBCDECDCBA94C4
+:106EE000B653805ED7DF8BFD55AC12481AEDAF7CF0
+:106EF0003393FFE58765279437EF5F89FBD8243A02
+:106F00005E7A36C8FBC078C893E18203FD9D99770D
+:106F1000225F7771BE261DD398DC10789EDB0DAA08
+:106F2000DE742085C507973A171A13693FEF8D4C19
+:106F3000CE8630014FCB593C8F3E41E1ECA670FE2E
+:106F400080C7731C1C79DC18D4EC3F9FA50C403A19
+:106F50009CD33216E31CE692628C7398328AE96BFA
+:106F6000EF5F6BF10B745EEFCBA14CF87EF05A1320
+:106F7000EABF9D5B643C2FEEEC1B44FF74FB2A9937
+:106F800040BC46C32A11E562FB66B68F8BAB6F9B94
+:106F9000900EF0DB2038416E1E5C5564847DADDDC3
+:106FA0002F60FBA2D5F7A7303B86C943D56E2B7562
+:106FB00054E8F68F48F9A6CABF1A0E87483957A376
+:106FC000EE331172AE06CE9BED90EABF7B8895C979
+:106FD0003FD0FB01EF81EF907E6B0FCB04F47EE19D
+:106FE00078C7048CDB827D93968F6A155C70CE5FC8
+:106FF000FE89C98FFAAABF64E64F417E7F6A22826A
+:107000000271F014EE542E8C3485FEF82CFDFEC572
+:1070100007668890A17452827056E3450B36B0F82B
+:1070200096820F56A494021CC627A29C2D6B14892D
+:107030005B232FBE105CB7DCC9E4B16383461E1529
+:10704000187DA5B07F3952991C5436C8103342B60A
+:1070500073F944F56917E80D15BB96A71869BDC506
+:107060003C1EA462EFF2142A1A4803EC5BB47E853E
+:1070700091F55FB14F70ACD5F4AFB657FB53FB3110
+:10708000EED2F733602FCF5F663FEA3CD4F17BD37B
+:10709000C747FEC7851502ED6FE4FB2206298F3C2A
+:1070A0003E6980F6BC434D55FF6BE18706E2D2C0D6
+:1070B0006DE41F63884B4317CD23287F53BC4D6E6F
+:1070C00061FA50F388A3C69A02CC3B809F6BB99FAC
+:1070D000B6763C3BB76ACEFFE011E0EF490502D23D
+:1070E00001F1BA8D8949A8072970BE5056C0DA97B8
+:1070F000D1F6C077CD2B191F5279A080BCA85DB501
+:107100007C02D65F2F28D07FF3DA12DCE7CB478AE8
+:1071100004CBD71F45BDA3BCE56812F02BE5CF1506
+:10712000B0EFD68E3139803F54BE53F9F87D99C502
+:107130008710B36328DC03284B51A2F2AF78983054
+:107140003B75B38C7CE719C9F8F2FD2D22F2F3C12F
+:107150006BEF98007CD8B941E8858F299F1684F998
+:10716000545CCDE275CA36317BE5E02A261FDA9BF6
+:10717000999E58B45A9E0CF9B27765C2FC5E4C1FBA
+:10718000BC5C7EEEA1A76C8CCECFBDF1EF14B9E94B
+:10719000A3FBE8FC6E7A8DCE5F09C3ABE8BA07ECBF
+:1071A000E8A7BF6E3AAE579543A5128B679AE35B8B
+:1071B000C8E27D2516F7F677CF2B621E8FA5D8C2C1
+:1071C0007244047A8F6771D2EB65A4F7487EFC475E
+:1071D000F9E89FC5D7DB391DA9F311F7B2F61057AF
+:1071E00016A070FCF5E69731AEF5CB578F4E013CFB
+:1071F00057EDA1F44BD7DBB9D9460220B7243FEEB7
+:107200003795CD22C68F132950788B4DCB9F2C3EBE
+:10721000A9EA751BD24DE53616775AB9E3781EC632
+:107220008B2C0A61DC95F755AE6F7A837940DF9538
+:10723000128B938AE4F7B1A94CFFECD8153B0DD61D
+:10724000216CDC8FE7AD954D77C8407FDDF223558B
+:1072500056EBE139A697D22F9CB3C3FCA60ED5CE30
+:107260006F21E2A96313E3FFCA16D96F81F96D5C40
+:107270008BFE6CCFC6B3181F5FF4FA16F423785A4E
+:10728000447D5CE44611CFB3688AE75691F189B535
+:10729000CD3578EE56DBC4E3FF22E2E2AA5EDFBB27
+:1072A000C34B4153F5AB5FD8411E9C6EDB60077842
+:1072B000D2FE30AEF0BAF3922E3EAAF77860973E37
+:1072C000DEB0E9711E6F38B99DE4F58C373C0DFFD7
+:1072D00080FD2635225E7363228FEF0E141647F170
+:1072E000E777DFFBD9F2F51A8893EFD876660DCCF5
+:1072F000BFFA6F5FAD81F826B2CF82FB94E7D5DF8E
+:10730000615CB1DA6E612AA3B7CE4DBFC0B8ECCED6
+:107310004F4D68EF74EE6DCF82F8B6CEADDFA5802D
+:107320007F6EFEDEEBD17F397F7B512A8922EFD53C
+:1073300014E8D37F1971E191F838D87C10E3B0BE1E
+:10734000FCC484F2AD3B7EB4A986C5E52A3C6E74CC
+:1073500073F4387C35CEB1B6F9969BAE0579DDCCA9
+:10736000F4BBEEB8C74BC58B7E48F17AF565E06F8C
+:10737000338F0B6E9A1C355EF44BF807C5D3CF5391
+:10738000F5F1A25F37CFFDF98B50D69CD86BBC6866
+:10739000E032E0A6C6F957A7BA5E4D053EDA16EB15
+:1073A0004D6378F34F12400FFC3A0BEE479C92432B
+:1073B000180712DA6B7240DC63E5DE8F915F3AB733
+:1073C0007F80FE56C2E3EC3B49F71F8B8716F83AE5
+:1073D000D7DB589C29873FC4A12A76FCCEE34D1900
+:1073E0001DAB71A8BDC59F0653F9FD617EEFA08658
+:1073F000DA4D2C4E3D1C972A8C047C1DD5C5F5AA70
+:10740000EB8EECCFC1E56838AE3A7A9CAF1A47D81C
+:10741000135F6C5F51E3A63BD7F2786BFA3D7318AC
+:10742000C4C9B1FDDCE3173E8E865F35AEFA0F119D
+:10743000F855D7D71B5FA8FC79A979FF57E1F26E01
+:107440002AF367ABF0E9F84B7439FD0DE7776AB7BB
+:107450007E9DAAB16F6772BB55859B3ADFC54D4CC7
+:10746000AFE8D8C8EC8748FEA6EB71458BB397D23E
+:1074700098FE5BDBB23F0FE450C7815D9CEE185D68
+:10748000D76E3ECAE274A9DCF66BE536617EE4C8CD
+:10749000FEECBC3F4F6BF4FE3C9BCF46EDEFB4E4FB
+:1074A000BA03E67FBA8DE951A79BC489FE28FD5F28
+:1074B000E0FB52F7BA6D468C9712ED31A84FCDB76D
+:1074C0008DFC242E095223C6FD342CE471420F3B5F
+:1074D000D300CE0DB61B09CCE751808FC6FF203BF1
+:1074E000DC04F43839ADB84054C2F355CB8D4906AD
+:1074F000E2D7E25F0A64827C3F92DF2E437F9F45A2
+:10750000F84D3E93C8E2543AAFCFBC8273A1D2BBD0
+:10751000DEADE6DD0F893A3F47AD297404F477F21A
+:107520008605FDD6E23E8B17FD666B2CB8CE83DB5D
+:10753000BF7D05E0D5F9731361E7089430A85C2896
+:10754000E3FE8BF6EDDFAEF933E899D0988E5FB6A7
+:1075500086D607FD7A732CDA035DDBE2F2509F7C5E
+:10756000E3C1292037CA600F033DEFF5547F03EDD7
+:10757000EF6432CB9FDCD217EF13546DB361BCE1E3
+:10758000C1ED3B6B41FE77BE1E0BC7D1E44B39F812
+:1075900037C87BF6C491B50AEA818A76BFAD2092DE
+:1075A000A2D5F3AA20AF8B7F2168A7A33F8ED27309
+:1075B000554B1CDE1FD1D4E3FCECCD60F7650219FE
+:1075C000C077549FD48DA396DF9AD69FDFEF0DFD31
+:1075D00084BDAFC0EA7B8CA15296F76530BE6DC307
+:1075E000FA252ABDF2F29EFDB2FA33D3FAEBEAA9EC
+:1075F000ED6B4DA42E1A1F54A709FC7EEF5F0747C1
+:107600007BCF22CAFCF1FBFD02F11A400FD86AC100
+:1076100038AE6A636010C4B7EF30B2F3916A7B6032
+:1076200010C4B7EFE1F2AF3A86E6E9F70C3E0FA8D7
+:107630000F79620EBE06F8AED969214BC17E7FC3B9
+:10764000E6023CD7ECF8F6E44B0510CF168B7EAB88
+:107650009A37FE0DF15F630ACC00FA0F6D35917514
+:10766000B47EC7D677B2408FE8900359091739F72F
+:10767000A96932E9CEB1D5759CAEF70F84FBEBEA70
+:10768000BDC5CA5EE4C5DE34A68F2E4F733D9D8610
+:107690007C6D75A0BC86FE44E8A76580F65E73A588
+:1076A000125D8EAD4A9375F768C5F03DC555D0EFB4
+:1076B0009724B83883A2A44608E1F979E5C6B34314
+:1076C000C11EFEEC6757E1B9D667C6D05090DB9F6C
+:1076D0006585866AE5F1A97AB322C9E897C0B46BDB
+:1076E000EDD9D20C02F1839669D1E4D396B4589CBB
+:1076F00047E543B151EF83EEE6F4B61A6830998D51
+:107700000B7E0875DCCF8C7E23CC23375DC1F2CA9B
+:107710004CBF11BE576DDC3540F7EE84E4C37A945C
+:10772000BF101E156485B1C0DA53AE542CB02A12B6
+:10773000DE8F96FEB39BDEC4309ED0C909716A1CF1
+:10774000877467423FA87A1F40928BCD002F232970
+:10775000764822A0DA877C1A439A30B5527584EDB8
+:10776000437504E28A4EF1F35B93A43C0DF2C374BB
+:107770004844797E29B8FD3ACD8EF3364975C489DF
+:107780007AC72407E8D582D74DBEA7F4D050BF7181
+:10779000C00976FEEF8278380C8DA3F3B33BDEFE92
+:1077A0000EF4034A6768677BAF23FE063A9E646463
+:1077B00079328EF8A39DC777703C10EF7E943F56C8
+:1077C00012FE0BD17C2C4A283A6EDCDF46829D6B80
+:1077D000759000E84DB1561288A5A935573AADE528
+:1077E0005F3B61F9FE949C41AE39C6E8CB23E99A30
+:1077F00038A5F3DD7251C4F6E723DA9FBF587B1535
+:107800001E1EF3806C76FF9DC12586AFC13BCE79ED
+:107810002108F0C8B33B1B008FC6D09107011E7929
+:10782000566627263512AD1D37209DC9AB4704B6D5
+:107830005FD2BF62ABA63FE230A3FFF4710EF7EE5A
+:10784000FAAA5FA5477D8B0470ED51DFD25BFD98EE
+:10785000E8F56DBDCD2736FA7CE27BE9DF1BBD7E06
+:10786000ED1B1FBF1750E023931B1231A8F7A00791
+:10787000A483BD157724A58451053B2788C05B0CE4
+:10788000D01FA58798819AEFF07FB91AFCF58F82F7
+:107890007F1240BA2BE1F3A1796B3A9DDF9D7CBA50
+:1078A000E3D7B373CCBBE7333FD29D0FB1FB424765
+:1078B0007FC6EEEDDFDDC8ECEDBB17B0733352CE03
+:1078C000EE0139E87F30DE3DD009C5F73D3EC11FEE
+:1078D000C886777022F4D7EEF776EE97A07E4984BB
+:1078E0003F46A527F5DED26CAE5F6773FA9C4B422C
+:1078F00036E0FBC87BF4CD692C2E8D9A632E58DFC1
+:107900005D7C7DEA3EE05D4E72E05D00D110E38477
+:10791000F31191DF5B257623BBB77A6B824EFE9C19
+:10792000CB51E260BF236FF2EFFC3DA2793728A96B
+:10793000DA7B5ED285587C7FA44176A6815C942F49
+:10794000FC9828942F8C17061045730F8DEA77C882
+:10795000ECB283A01F4772149332D00BE3399D25FC
+:10796000DDD8AD87BD4FE1326FB982F760EF486770
+:10797000FBCBD28CE2B94017A27DA4D36DED895721
+:10798000EF76B6BE06585F76CF7937189D4ED44352
+:107990006FA41A04FA7B9C66988F68523E56803F0B
+:1079A0007F2B13B0FF7BC281E1F35C52821FE25F49
+:1079B000E6D8971E01BA5D56EFC073B425F5399825
+:1079C0002EAD4F433D7471BD1353152E66A7CF25C1
+:1079D00052389B07B2FECC0E37D333E83E04F11782
+:1079E00092A32E007973661D01FDD7D20D1F1FC211
+:1079F000C7D89D7763DE04799ACA8D9310BEB43DD3
+:107A000029033F6A867B19C0C7A25C49140D5D98A3
+:107A1000D286E9F23DE0A6D2C71606BF2705461F6B
+:107A200091F07B526E53E0FCF9C91BBADFB541F807
+:107A300051759FC1EF37EC7CAE57F83912509F9DBE
+:107A400053B8784603FDF4043F877CAC7E24C2EB38
+:107A50007188EB1A0CF6810B5311E047E9C894EBDF
+:107A600025226D6F52D89C4DD66297A180D12EC031
+:107A70004FB432789AD2EAF03CCE6C65F012AD5E2B
+:107A8000848B6C65F012AD8CDE8C3C2F01FC866320
+:107A90007BFC4EE1D79C3E02F0305A072F63D2B8F0
+:107AA000CB83DF4A0A3F3A8F24CE5F917048827BB6
+:107AB0000AB961BEEA4DAF7B8EAE1FF6F117287C86
+:107AC000204DEEC57E4CCE607234C950B75F06784B
+:107AD0002410BEBF7849662161A18AF097E6250A85
+:107AE000E405360FB25E8F57D12145BCFBA6BC0022
+:107AF00074B0E21DD900E7A4E2821FEBEE938AD3B3
+:107B00005CF10AC2D32DC0FEFC44BD82F85B0E7846
+:107B10001C0CFB23B3C71EE5F87C0CF804F1CBF872
+:107B2000E349CE2F4F733E6970B2FB13CB26B2B838
+:107B3000ACA47C037F0F2D40B4714FF1CE2662A41C
+:107B4000F3421D5BC134807AC62726FF15B45D6CF5
+:107B50002E71019DC47FF2801FD74A8AD3412F8A9C
+:107B6000E7FA2F19A3C44FC78BB40189D921541444
+:107B7000A25DD36688F60E5683F38019FCA6BDCDB0
+:107B800067FFD41D4897A5576378304974174F9FF6
+:107B90004BF3D6C658F40FC63ADD858F029F37DA0D
+:107BA000904EAD74FE651ABCC7F682D717336E309F
+:107BB00064503A144169A3F87DA6718005E0FC9CED
+:107BC0005C9C0EF2F539BECF521C28DA73A80E2E3B
+:107BD00027ED0557EAECD915B20BDB39C6E8E5C04D
+:107BE0000A2E7713C6EBE95D95BB1F75CB5D773227
+:107BF000CC27E5C278E4C7A49BA3CBDF06D9E885F0
+:107C000077051A86327EF79618D97D989EF200FD88
+:107C1000DAE7DC83D6813C55E96B1161F2C74B6230
+:107C20009CB81FF1777454FD7809BC37C8E52CA4C3
+:107C3000E24023D24DCADD068CCF5BC6DFCB7A8A09
+:107C4000D217A43E4A5F905E9BC1CE33169987E15E
+:107C5000BB6D0D5603CA0BE95393DF0AFAEAFE51D6
+:107C60000EF02348B2B3CD05FE409BD4B48E40BD88
+:107C70000233BC2721C41738800EBEB1CDE977B1DD
+:107C8000383C8A4E01E8C891544C8EE5E2E901DEA9
+:107C90007B911D3713F02BBE90546701B8E5663019
+:107CA000BBABB1A410E148E13B2E2339DC4FEAB471
+:107CB0001BBBDFDB826E5FE8E5FECC940CAE476752
+:107CC0007AC9400DBF370A5C0F53BC2447C3F78BFA
+:107CD000AE9840E05CA927BFF722CF363079F6880E
+:107CE000105D9EA9FAA72ACFE40839A1A68BFB4D07
+:107CF000D4DDEF322639817621F51A288A24EFD592
+:107D00004FDE158F70980D7020693776DBB53FEC2C
+:107D10000F7A6561547A8B946373BAF775570AE0EA
+:107D2000E994ACA44E077A7AA7B77DDD558A74E84A
+:107D3000EBA3C0BEB4FF991FA35FE7C4333605E4CD
+:107D400050D985C7717F28BD300AD3F2C61B703F5A
+:107D5000179E9D5C08F4D0BEEAFABC4FC1CFE3B3D6
+:107D6000E1BEDDDE583408CF237DB10AC477B437D5
+:107D7000D2F2827039C48B8B9A780102DE77CDFD06
+:107D80006F52A0A05EAABE7B46ED3AFB68F00BAD39
+:107D900016F15E58E9B33617E89FBDD15FE9AAE84E
+:107DA000FE00D86BC1EF4A07CC013D7ABF7D742835
+:107DB00040FB9DB38E9D2334185D2703A0373D63A0
+:107DC000C173C88684E8EF82CCCDB87E19C881B96A
+:107DD00019AEE7104F56F64E69EFFCC0C63F098753
+:107DE000CC708EF5227F1F4572DBA7EACED9D83939
+:107DF000D649EE6721E65ECA6378B9D24BB99DC514
+:107E00008B1047F472D5CE880DDB194DB08E9AC613
+:107E1000338B3F4578713B83CFFB94CCE67DEA15ED
+:107E2000937F5114FA3FC5E3532A04065F950F4E22
+:107E300075EB476E7C0F27924E8575435E1845FBA8
+:107E4000FDEA908CFB4635A52FA4AB75A3303E5EB2
+:107E50007866D4D310377CFEB088E595172C58DEB1
+:107E6000F1B0F305887B0ABD2B13904FE70F5D1F20
+:107E7000C7FC447A3FF63D7D985C38C6E543E9850A
+:107E800027907EBBE9C437D708FC577AE12946DF43
+:107E90001B057CB79278ABDF1D3B90D3E768685F2A
+:107EA000317911C07B8C0FCF49CA36989CA00F4402
+:107EB000E2F95886A2F37B94059761BF84EA5F4993
+:107EC0009AF3F4533CCEB8EC027BAF9038BC240D4F
+:107ED000F881CBA7301DEBDFA1EDB044F7D39FE3D2
+:107EE000FA4FE9856B747646787DD7E1F752BEFF8D
+:107EF000970547613EBC9E1746455B4F781D63B0B2
+:107F00007E477CF4F1D3399C4FD6971317956FE5D4
+:107F10004656AFD477BF11E44EE9AAF80441B3AE98
+:107F2000B2C62A5D9C47D9AA12E32C4DBF613C2CF6
+:107F30007E77AC14C643FA4B0B272FB2825E502CCF
+:107F4000F7017E5A5751F85305FA63F2E90BD997B6
+:107F500005F2BABDF13E7BB47B13E97D22F0D3C8B4
+:107F6000F143F5EA020D7E54BC44B63FB9B6ACF01D
+:107F7000A7E08F5EC95E21E95DFE44E02D3B3ADC5F
+:107F80008675C32D07E38D2E0DB7AB7471453DE0AB
+:107F9000C6F1ABC245FD4EF5A8ABFA8C80F108BB2B
+:107FA000BFD3C8F07F297885C7E5F81F1B7D1DD397
+:107FB000BAD7B1807829A3CEB9E43A1E245EF3453E
+:107FC000D6A1E29FBCA2C3FFB497D6221FAAF89EF7
+:107FD000736025D2EF1CCA8F70DEDFEEBBDF1E2D73
+:107FE000BE685A6F781FE825B985FFF7F0FE85EC6B
+:107FF000CD82B832EF720BDA23A7D63D91A585F377
+:10800000DC8CB1F7005EC8FAE4CBDA3FBCE39C87B6
+:10801000C0BEF43E23A33F6D6B86BB0CDA97733B67
+:10802000FC91F80983A2E9078FD61F1A027EBA864F
+:10803000FA364C65AE5F12D02FB3515F72457BDFCD
+:108040006B491F26571EAD6F637E4FB39738B4F749
+:108050008909D39FFE93307F8DDACE28BB1DE03F88
+:10806000350AA418F53EC9BD24BB00FC1E49F95EC3
+:108070000DFC16F761F79196A51D70C0BD6213ED5A
+:108080001FFC39E64CE99CFE9C93E5F3854F45883F
+:108090006F96939A08FA4373E9770DBC8D496D3A50
+:1080A000FF74241C24B31DCF9B24C2F43975FDF446
+:1080B0000BEE4B8FF17D6905F76B3E5FDF847EFF32
+:1080C00045B176DCFF16F733307BCA2CE17B35A651
+:1080D0007856DF18C7E66D01BFB708FB6A00F336B4
+:1080E00078D147C4A7D104C8C71345807C22092C86
+:1080F000C67752C6067F02DF9D696E3FE0F19BF4B2
+:10810000B62302F8B18BDD8361FF6D14BDF90AADB2
+:10811000FF7331940FF5B268D127092CED07F1D028
+:108120006ECDB9167B2754D1FA0523F3FD164811FD
+:10813000E73D7F19AC2D5F9EE67A1DE6D16061EFC9
+:108140000C251D17F03CA7C1C2DE1B6AB0DD1E075F
+:10815000FBF86FFA30BD1DE900E8E810D367CE499F
+:108160004A5C02F3932A6FEAFCFC66E54DCD3812B7
+:10817000B7F7D653BA9434E72A03259701E8E60AFD
+:108180001FFDAE9D67147F5C82159FE58D7A9EA3CF
+:10819000CE0FE2F6018EE2850968AF45D2C39E6E2E
+:1081A0003FB357047C4E57DF2F961E61F978A2FE2D
+:1081B000A1FDF569B73EFA08CBF3734ECF2C768E4E
+:1081C000D9501287F171EA3CA6B73ED6067AEAF496
+:1081D000D6F4D970BE35DD3AE87348F7C8A103B1CB
+:1081E000A007DE2FE0BD923B7FF7A61C4BD3ED1F0F
+:1081F000AEC3FBCC9F73793A8384F05D783771F01E
+:1082000073763F7E9F459C3CDF24835D7F77C07FF4
+:10821000DB649ABBE74DFF6450DB661C0ABD056258
+:10822000C0DDE4988067086ABB16E7DB2CCFDA75FF
+:10823000AF5F32E37AC2EB35E3FAD5F5D19922FC90
+:10824000BBE1C3DF6B52E121CEA2EBA6F4323DEEDF
+:10825000F61BC945F4F2E9D69CCFD9A1099B4F245E
+:108260007CCE4311D51F3BFAB84826C5DF1FFAB8AC
+:108270000448ABCDA12CA93FF2890CF95AD1DD0FEE
+:10828000429FBFECEB1E9C0C70684BBC2CF979C470
+:10829000C2F8FF08D033C4795D48C275A9EFD01F7A
+:1082A0007CA0DD067AE7E2ED1FE33BCB3562F0C947
+:1082B0003BD01F2AA2DD74AE79F045EF9F1D013F30
+:1082C00015DDFFFA66AAF72CD93A674A8C4F663655
+:1082D000C7623CFECC05A2EE1DE9990B583C1F91EC
+:1082E000DAF26ED5E9EB8FF4DA0FF80B22FB99BDC9
+:1082F000A0881C1F0EE7B48EB1E83F58C3E86BF6A8
+:10830000789708F1CEA3970878DE3AEA84D212A4CF
+:10831000F9D9FE7827B0E7EC07FE6300BC7350DBA9
+:10832000C6FC81A9E2BDF90F839FE500DBC7217F71
+:108330002FD089D5A55835E7051D725D3EBCF7E7FE
+:10834000BDC7EA02FE2FB9D5F529BE17C1FD15EA52
+:10835000BEBAB3B104E3644BEE564602FE4B9A2C10
+:108360002E4CCD448AA172AC44226648538D44B24F
+:10837000401A43CC90162E62EF7697364E45FDC0DC
+:108380003EB2D808EFF196B4FEE26B685F2605F6C0
+:108390000B7961F894B4BEF31DE075AEAB18E31928
+:1083A000AFDA68D4D981439BF4F9AB5BF4F9FC8074
+:1083B0003E3FFC903EBF2193201DCD32DF920BF05B
+:1083C0003AB0D744F72288FF3361BCCB3181E1C793
+:1083D000BBC982F2B0A8AAB510ECE033AFD90C60EB
+:1083E00047EFF9EBAFF03C3CB42596409CD5FEDF5F
+:1083F000C7901888577CDDB20ECAAB28EEC07F59F3
+:10840000F5BA652DD8E13BAE54ED787F1EAC67C759
+:10841000DF587C4D6893C90FE7E36776FDE2353896
+:108420004F3BB3A90FEA57C704AF2106C6FF82F935
+:108430003F83FCBDB8207F2FAE6AA3DE2E9E97C976
+:10844000E44C70D13571D1F42635CD494BCC1D4F5C
+:10845000E7D6F5B86926F8810637EAE1A2D61BE22D
+:10846000D77F7F90F73F9A18C3749A0D7102FE066A
+:108470003BECBF2F477F277911E79F575FED6E27B2
+:10848000F277E288A2B9371596DF647E1F88DF0095
+:10849000F8F70F7FAF229AF968F49389BCFFAFCC4D
+:1084A0002C9E3989BFDF7FBAFE10EEFBDD7A5FBDFF
+:1084B000CB355E932F6DDC9F5202F6D3AAFD29B314
+:1084C00034F0AADE7430E52E8C7B92C0834BAAA7D1
+:1084D000BFF214F82BAA37894D304F2807B87534EE
+:1084E000BD65877A541F1E067E90B03E7ABD6BBC78
+:1084F000868FFF5EBA55F9AD9AEB2F3B47B64D809C
+:1085000038F5AA46C109D5AA9A6EBB6532C07B155B
+:10851000BBE75A28916291F257F5D6DB7E3C14E214
+:1085200066568F70C27C6817B7C2F7AACD67F13E56
+:10853000C3D288DF3D50D3DD994C2FA4F503065AF2
+:108540007FE9EDD672905FB4DF37217F20671DBED3
+:10855000AF623FC5CE1FE8F74F0C546F3935CEFBE5
+:10856000DE5DB4E919D2F4D164F02B35EAE991D299
+:10857000B7007A596883E05C875F1715DE0C2AB76D
+:108580006B21C6FBD2F299D1EE5B57F8F5FD44E2C0
+:10859000FD233E5FFA97A3A59FC87A8993BC184F25
+:1085A0005EBD80CA438D9FA0FA840FDF978C1C8725
+:1085B00068E99AE913440179B8C5A2BE7F24980BF3
+:1085C000799CEE0096C77715814E29A1545D49C666
+:1085D0002B00EF9BC9444847835C81F7F44736E59D
+:1085E00041FDDD42F09597B03F1BCAF10E4700DF19
+:1085F00099CCE0F74C3B1496EFE27E4EB5BCB2D579
+:1086000082713667BE34A29C5DD87410E3E83B5E8D
+:10861000B3180C541E9CD99A380EE2313B9AD83BC1
+:10862000C5A79B12C7192FB26F47CA0D753F3D0AE8
+:10863000FFA4FBEE9F335DDF64C23EF5088B574D10
+:108640004DACCB8FF6FB176ABB24635D3ED831A1DE
+:108650007BACCE7508276FB6847EF03427C40995AD
+:1086600008AC5F63BF62B12FAD6FA375C11F9D7072
+:1086700048C4DF6B382E3A7FE21880EFC9A31E345E
+:10868000A7C08DEF539247585CE56C8904244A6F6C
+:10869000B3613FCAC33CCAE5D9AB048C2B9BB34C36
+:1086A000BF1E782757BB8F56103F7BDF42EB47EC4E
+:1086B0000FF12E74BF81772DCD2CFEA272BDBE5D51
+:1086C0001509E07CAA377F6F8A06AFAF89BA2E57AB
+:1086D00026AC4BB8D98CF3BAEFB93876DE63242ECA
+:1086E000D84F43CFD950BE571137F67727DFD73D44
+:1086F0000F94B8E6801C5E30DB352711EEDBB2FD4F
+:108700000F4D3EE46F01F79DAAF124D097BDBB4108
+:10871000605FAD6A150243216F265EFB30F61DDEF9
+:108720001F80756BEFD794131F8E57BE4AFF9D7C39
+:10873000C8F05ACDEF3192F59AF2FEA09F317854ED
+:108740006F36E9FC3AA3370B5E1BDE77F537A4D012
+:10875000F9D59EA2B282409CEAF7265DFF10CF3386
+:1087600002F77D62A1787BAE5BAEFB87448BF33F63
+:10877000C2E1F8DC6DA5E9C0AF4F83DE9AC1013DCF
+:1087800012E516F71F9080998E1333BC3B8FE58559
+:108790008B587ECAEA57A6348EA1769EECC673A18A
+:1087A000D962F1DB701FECE57EEE9BFBD271661B9C
+:1087B0005C5912F2AD6B10FA43173038BC30AC6E16
+:1087C000485D143D50C5F3F3425300CE65BDBB98E0
+:1087D000FE652B08C9DAFDB5BA2F93477107827879
+:1087E0006F22B45DC07B962B85A3781F71E50D0ABF
+:1087F00001FB3E8DE209E4F14A813C2250B8143479
+:108800004FBDF72DC073418C137EEEA2A679AC58F4
+:1088100063C5F5333D2DB66E2D9CE7A4CECC19066D
+:10882000744ED73DF366FAFDDEBE0A8E976E65780C
+:108830004F5BE4CD86DF818A3B507CEF5BC0874392
+:1088400063F09E6C2A85952D01D325A07FA5918587
+:1088500002D47BCECEFA4F368833A7427E18CB2780
+:108860003C24B8D621F12DC7FE534D6422CC13BE53
+:10887000831E6906BF0296FB197E8BEAF2A1BFD464
+:10888000012C4D320632A19FC3DDF876A35D319FE6
+:10889000EF63F3B78E4D053BEF700735B8A9DC3AAF
+:1088A0009CA6EA43012BFE3ED4C01C569FDB85F3F9
+:1088B000F3D97D83A42C7DBD2ED915371CE4E807A0
+:1088C0004C8F3F6F75A17FFA1A63747FD64B7D99E9
+:1088D000DEE2B92010BF661FF04CFB06F54ACF055B
+:1088E00049F7BDA3DEAC8B73AE2E3F80F7EE6B482D
+:1088F0001BC661D734C5EAE276AF89893EAE4ADF4E
+:108900009E0B22F1461DD7A8FF7E21917813A3D597
+:108910004BD17FA7EBD0E55BBEED5E077C272383C1
+:1089200076B0072771BDB6CB6FF0CA5787F1D2E991
+:1089300008EAF69D4E85E5BBF8799C5AAEF6DF391C
+:10894000CDC8EF15B17795013EDEC184BCD87A164B
+:10895000FDD1D5ADFB27B0DFF76274A18593572316
+:108960003F521ADA0206CADBFFDEF7D453B94328B6
+:10897000891D50F9F8F4532ECAB729A241C7D7B1BF
+:1089800005DD7C8EE2E53983C8E5C299A7C68FD1A3
+:10899000E659FD70FB8E29E3A96E5F90CBDAFFB13B
+:1089A000EF97EF2D1A18964B741D59C5364DDE1CE6
+:1089B00091B7D2FC504DDE11519E14519E1691CFAD
+:1089C00064F53B6C812CD149487BDFB353A45170D3
+:1089D0008E1D98012F0A2C6BF86ACA789AAF296805
+:1089E000C3F899DA56C189C7FA6A7CBC93E959562B
+:1089F00067107FCF2EB6A0ED6D9003D52D8243A0DA
+:108A0000F46E6DDA8A7135D5D04ED1B46B6276676B
+:108A100075D3516CD76BFF3906E4E7A539C7B09E13
+:108A20007A7E7407E9FEBD8E0B202F6B9ADAD93E51
+:108A30001C717ED499EE3A88F230E2FEAB07FAB5AB
+:108A400086E95EADFF87A1ADBF836E62E79F5D28BB
+:108A5000D1FA7FAA691F01FA12BC710972FF79C1AC
+:108A60003F04F6E717897B08EC47F7D45CB1DF4099
+:108A7000EB1D9183ABE1A9864159969B242AA78FD0
+:108A8000D8827D052A4B72D624DE04F03C921CC4A9
+:108A9000171A7EB6268995F70DF68573D7DCAC1FBD
+:108AA000B2FC15C1D590BF75CD952C3F34D857A4D5
+:108AB000EDFB7BAFBA09E0BFC1119D6FFB66317959
+:108AC000AECEAF2CDF959605FA6635DB2FE0FAA522
+:108AD00099CAC51995A7B76CA07098F1D358945747
+:108AE0001B3A6EB9B118D7EF2D863837F6C43BDF85
+:108AF000CF502E4BA807A4C31E9610C6872DAB4D92
+:108B000041797F65DD56D8F75367E4A2BC3F9FE902
+:108B1000AACF1A114EBF1DC0D2FA2C76DF235534CE
+:108B200060BC41EA8336D4839EE6E749946F10BF68
+:108B3000568E8F61594CFE0DCB62765246DFEBEBC1
+:108B4000613D7772FD74C5E3FE4D160AFFDF0391A8
+:108B500024A17F1BF5DDBBD652B91107F114AE7409
+:108B600090077781FF37379C57F5F715F9346F0D6C
+:108B7000DB692BA6BAD2B571402BD6B27255DEACEA
+:108B8000C866EDD57D27B581C127F5E921EB601DCC
+:108B9000B112C1FB1773A70D5AB710F7EF9B71BE47
+:108BA000C4E54A07FBFB44457F03E8952A7E1ECBBC
+:108BB000774DC2F5882C5E5DC5933A7E3D5FF76CBC
+:108BC00091EEFF749D0FF673231CA93E90C7820B94
+:108BD000983E500F8ED8E4307C89141C01DFFF17BB
+:108BE000C1E95E58F73F0AA728F2E267306ECD026E
+:108BF0002A2F0C1A79C1E1F7BC1090530B34EF9770
+:108C0000D0EF6007DED1D7FD6896E61C67C68335D6
+:108C1000A8FFA9F38AFDB79D13EF203DF92C523F21
+:108C20003BF27BF332F4031A9B502E1EB991381796
+:108C300082FCE0E7B2AA7E59F8D3AAC360479DCB75
+:108C400012B19D45C5AB50BCB594C2E971BAADC275
+:108C50007D74EF5416DFA3EE9B2BF8BBBB2B1EB825
+:108C60000AE3FCBA48107F97CD3B92A0FCEB2E9F05
+:108C70003E08CB29BEBD16E0F78A18FCDD8115F948
+:108C800004EFD9AC987E2596EF51FD4AD3CD38CE6E
+:108C90008AA98C9E5654B0384CD847006EBDD1433B
+:108CA0004A03F36F10C995A78D077897E32FB62075
+:108CB000B8FD63D02B975950AF84BD13CF477CA923
+:108CC000381EC5EBF62CA46F368FD9CFA6FB97E2E2
+:108CD000B84EB4CF1FB3B94A505E3D1CABC0FC5771
+:108CE00059C812F3303047C82328F7F87C88EF05BD
+:108CF0008CF398C9F5B5CFCACFD9401F7893CB1B59
+:108D00002018B0976711563EEBA1D8A360DFCC7A4C
+:108D100048C4FB8564C9F52EFD79079D6B0AF8C729
+:108D2000F95F63C8067070433B3BF4FF9F3678CF12
+:108D3000C4FD10BBDF4BBCB4BD261EFA63E05FF080
+:108D4000B38B6CFEA43E5689F62EE8C75CBED3F901
+:108D5000BBB4E3A9E344F64BEDBB4F005E14EE0158
+:108D6000B807167A58E4BFD7AA9F6F9231F4A4854A
+:108D700096CFA817E3175178BA17D870BDEA7C6769
+:108D8000A686AE65BF0BABEFFF646C6D21F8C355D3
+:108D90007B843CA4B7C7C02FD19D17314E1AED9AE2
+:108DA0001EDFB93D1B690712F23793B65EF73D0D22
+:108DB0004588983FA72B4590006F6E1EBFD08DEF62
+:108DC0008879ABF034F48B0ECF2463B02FC82DF725
+:108DD0000213C221B2BDBAFFBD60215EB0131B05F4
+:108DE00001E9B1F18158DCCF8899E1D15319A30091
+:108DF0007DBE680C611C937737FBFDCF2E4B680757
+:108E0000CAA581CC9FD0F59EB816EA752633BAEE76
+:108E1000DC25737E22EC1D89F7C475582EB07E3B8D
+:108E200017C6627C14DCFF34C2BD4CEF9FEBC1BFA0
+:108E3000A2DAF1C777B0F714E0777BB47630DC9B29
+:108E40002D1F16960FF83E0CF0734B2CF713B92B11
+:108E500070BCBB6208C461D41A048CEBADADBC120B
+:108E6000EF9110FE8E73359F5AAD81DA83C3C27CB9
+:108E70005E6B383608ECA96AF3327CDF9996BF093D
+:108E80007618FCCC6EF7EF7864F7A4EBDA6567FE32
+:108E90008AF7DA9BF5F8AF0ED309DE8FABD4D24D4B
+:108EA00076981E50DF0639319EE0BD7C1BCFC74E41
+:108EB0006CF3839FC6C3FD16C907D8BBB5B682261F
+:108EC000027E53CF29A66F8C6E5D7B10ECDFF88994
+:108ED0006D6071D1FACCEF16797F6854EB7211ECAA
+:108EE0003A554FD1D895436E1EAA4DD97D5BB053EC
+:108EF00061BC207C02FE90D8FEF63CDFDFE83E88B5
+:108F0000F278AE6F30EE83B04F811C53ED5C906B06
+:108F100020475EEE376E5A3FBACE3C65DC2DFDD859
+:108F200039CC10D4EBBD9777DEA4D6037BF7E2FEF5
+:108F30003006B7D0CA382627E00740C14FFC5B791E
+:108F40002DBEEB0D8297CE77DEEA6C94BBAA9FA66E
+:108F50009AFBA94AB95FA794FB75C0AFAA8D7B05A0
+:108F6000BFA5365FCDF9BE067E4F0ADF0B3085E325
+:108F70005EC19F339E046C500E7E1D3BBB5FA76D90
+:108F8000EF21FE2209E9FC7B93EE5DAC156CBD334D
+:108F900039DE575A983F67F4436B45E6A462EB8D80
+:108FA0001BE6CA7EB420FC3ED7E71C4F2A5C8CFD32
+:108FB000C6DD03708F11D9FBE6A147D9EF5D9FA0F5
+:108FC000FBF356EEEFB8D98AF78B5D03212E417281
+:108FD00064DD1CE5775B97EEB6E03BFDCBFAB1F3C1
+:108FE00060F5FBB87EECFE2EFA8100EE0B6351CFEC
+:108FF000A660CE033A2AECAFEE97240FFC4F4779D8
+:109000007C67EDED5637F417E47EF195FDD8BEB5DB
+:10901000B21F7BEF5FCD77DB759C5ED4732CF0C7FE
+:1090200068FDD7FEEEFACC7FA2EEAFCF57C4A05CAE
+:109030000AD3AD01EF4FC6E6161BC18FB49BCB918F
+:10904000126EAFEF86035A90274DDCEF2C3966C0C5
+:10905000EF02ED3E958BF1924946265F76DF19438C
+:10906000207EEFD0E9579F788F969F3B65C4F7F03D
+:10907000E6707FEB6E78F71DE4E57613FA11AB8DA1
+:109080004C5FACDE3794E92946F74A88EBF66E93DD
+:10909000D1AF556DF76F7A05CBD39D14B3701F9484
+:1090A000E9B9BB6259FB18FF2F5F03BB735FAAD3FB
+:1090B0004BEB2F4873EF03BC66989438A29EAB0A23
+:1090C000E1FBA2C7FC4C2F3E068207C669B5F1DF63
+:1090D0009173A5CFA5FD1C7F3C15D743E52DEA4F25
+:1090E000C79F32E1B9D9F3DDE332FFE731B918DFC9
+:1090F0008B39B63DDF492D4BD2556C0C807FDBF3AD
+:1091000034D3E7661B9435001FB22FD6A9B3479F0F
+:109110002A63EF47543E34E562E7D820DFB5FEDD31
+:109120004E12CA427BB4BC7F13C49376B60E71B2A2
+:10913000E3AA343C24A9E5E7CB276406DFD05E1917
+:10914000E9F972FB07BAE8FE9D3B91E0EFB769CF02
+:10915000D322CF217AE6191E3DBB53B9DEA62FBF1D
+:1091600025D31D02F956FBCCB7471628305E08E51B
+:1091700021F1317FFA09D93503E8367E7C4017A703
+:109180006556185FCD36F1FD9E048C5A3E54CB0BCC
+:10919000C791A8E7362685E901367EEE1C59FE7F89
+:1091A00000F2988AEC008000000000001F8B08008D
+:1091B00000000000000BC57D0B7854D5B5F03E7360
+:1091C000CEBC92996426992493F7C93BE4014308E5
+:1091D000112DEA24040C98D209A062B538BC41C90B
+:1091E00043B0BDB1C566201102A2861A1128E084E1
+:1091F0008762D5367801A346EF8048B1D5FBC747D3
+:109200005BB4F7F78B4A29528188964BEFB5F55F2F
+:109210006BED7D92394322D8DBDB3F7CB0D967BF51
+:10922000D65E6BEDB5D65E7BED1DB36A602C81C159
+:10923000CF4C334B64EC1AC67F324F316FD0C69897
+:109240004555A9FC9A5321D37CC867AE0C99168961
+:10925000D40FE909230B59CA21DD620FEECCC29667
+:109260005E86FD2C9A00FF85A68B64D66629C3EF27
+:109270006A4FBF8BB193079C9EF5F09D7DF995CC0D
+:109280002A189BCB443D336BB7C431F67C9B14B298
+:1092900040BDB99BCD3BADD05FC56AAF6C87FCC00C
+:1092A00076C9B313EACD6DABCCDF02F93BF7977A01
+:1092B00064681A83E3603EE80CCA50FF9AE649EC02
+:1092C000E3718CCD37074D0A7C674F4B6C0FA3FEC3
+:1092D000DBB0FF65D02819E0F90A7FAE1F4A176F8F
+:1092E00036C364F9DCBFC27F8261F96CE8B7BB4B5F
+:1092F00066305FB617BE170E7D5FA6840E49318CAF
+:10930000D57747B4677F330FD643405980F0E832B2
+:10931000B13B7C369A74525D29637FC0FF26336669
+:10932000CAF48D53C763263769861DE65DC5E735E8
+:10933000B04F22BCD6B32613C37E3AE319BB3A6CB6
+:109340005C0B0B45437A520E50F922F3464A6BD41C
+:109350002C1AEF4ED66F6239D8EF80C907E3D9FBDC
+:1093600080AE2597CEBF06F960FCC87C3055F0C1B1
+:10937000B2532C742D8CB76C250BD58FE6A91DD25A
+:10938000450A0BC4005E17010E62451A55C6F1AAC4
+:10939000160EE16569509F477CAA6178463C869726
+:1093A00037F67C650ECF279918B3C60DD11908453D
+:1093B00070274D6A1ADB04705EB3322833985F4A17
+:1093C000BA77522EC01B5DCEE7DB78DC6251C760F6
+:1093D000DEC7B2A1DE176995CFE54179A3C2BCDD36
+:1093E000501E0D78E982EFDBAD2C80FD3F9EA75229
+:1093F000BF6E13E75FA3E263636D4897BE9001E918
+:1094000092C01CC88F1A3EB7DBA15D19B693A8DDC8
+:10941000607B0B6B8B0A6B5FF5A29531582F175E43
+:10942000B007CD509529FE4C27F497F87B335B0F9E
+:10943000F9B32FDA97607F678D6C7637D477C9AC34
+:10944000A99BF8650DE1FF8748D7F1C84D55A90CD8
+:10945000795F9A96CADC58BE9ABED73B81BF86A177
+:10946000EF607956DFCD9CAFCCEA4E18EF82B3FFA8
+:10947000079807785800F2CB550E77E3FE49637FD3
+:1094800004DF1B7D360FC7BE7F2CF2AB59BEE766EB
+:109490000BF0D71479E5C0BD308FFA749BC30C4D27
+:1094A000AA33FFE3B7B742FE93FD4666463AEF990B
+:1094B000349B655F0A87962E0D1A3FEA0F5B2F7764
+:1094C000EDD5E7EBBBF5F946A67CD4AFF101A06082
+:1094D0008B6A779D8C26D9E1F90AF8DB6C6E3AD558
+:1094E00005F09A5F327B56C1E706D5BF03D7538399
+:1094F00061E028E2D99CF9E9683FE0A52AF3CBA313
+:10950000A988FFFB9807E1BE60AD9C4BF4D862557B
+:109510000361F2AB51F07F67462D95776E35AB1244
+:109520002FAF1D0F726B092D61AA623100FE1B3730
+:109530004FFD441A4DE516A44727F029B57B4E0A86
+:10954000AE82764B362FAE65507E86054D1680E78F
+:109550000F623D35CABD532CF0DFCEB89A51285F5B
+:1095600094BF2A3EA4FF5AECEAEA217CBD34B83EFF
+:109570002D1D27002F373289C5E2BC9DFE97709EB6
+:10958000F5967E5325F473FD5FBF20B9BCB8F9D5BD
+:109590009C13E350DE78E712BD617E284716DF7B1F
+:1095A00088BE4B332C04DFC9745BD00CDF5FDD62F7
+:1095B000E679A789F227B74B945FDC2D052D595822
+:1095C000FF627C25CAEFED4687995D8AA748BCFCFF
+:1095D00071DBEF621880FC47102DB8BE98A329C636
+:1095E00067C7B2A69819A588AF1B3E41F9B578BBED
+:1095F000EC09A19C7ED9EEC963989F3C6AA10DDB62
+:109600007F1E5F89F8DB31D921D377D9877288290A
+:10961000DEBEEBE1BBB2E32A15D7CB91ED1CEEC564
+:109620004ECB1348E7EBFF2A13FF2B06E6DF674319
+:109630003A7847E1BA53B7ED9982F8FD635D8A81C4
+:10964000EA3F2B3107E2C3D99C88DF174B8A0FD73B
+:10965000D992CD4B6B59CC10DED7A832E1BD327315
+:109660006562BF8DF8FE66D477F5DB81CF71FC199A
+:10967000EFFFF656D710DF4B33364FBF06FB7FD2D6
+:1096800048FCA5F5D3B8EDDB823F180B019E160B05
+:109690003C993357E6E3F8975B0F8B5737E53B6C04
+:1096A000975F1783EB7D1BAC8F62C6FEAA4AEC2B3B
+:1096B000A0034B8B233D33D27AD4F493ADD0C0F5C5
+:1096C000BE8779F7409A64665E09E457769642E56C
+:1096D000D95926C287F297E57BDF04F89F53FDD165
+:1096E0005990CF64DEB1A867D40147552CF4664386
+:1096F00006294738CCC13D24E7200F78DA94C09E74
+:10970000581F066786E80FD6AB0BFB39FBDE974781
+:10971000118F0D199F8E46BDDD78F10B930AF4B4BD
+:10972000F54A24676D1E1F43FE68ECAD630B4A8645
+:10973000E463A387CBEF4BE44C9691CB33D700F592
+:1097400033359BCBB74E275F9F5B9BA38228F7B631
+:10975000BA8256043ABA3CC050BE4F2F973D08B665
+:1097600066A7F82C9C5E16EFAB4C467EF5C81E141F
+:10977000F17DDE8FDBE221FF66F9648F0C799B7748
+:10978000577B36CEDB6314E539019CF71B132BC9DD
+:109790005E99EE95695CB6242688AAA2CFFB8E6BF3
+:1097A000018CFB1DE67DE404D0B1069437D2B10FE5
+:1097B000C7067A9D71F827205EB4F97CDB33F591FA
+:1097C00013E1768697DB03F089EBB1F2E1F1305AD1
+:1097D000ADBC0EFBB9FE3A4E87D3CF9A83AB61FC8A
+:1097E000D356D03361FAE2B49DEB1D5F9624ECC2F0
+:1097F000EE0C94FB8379659401D7FD3D0E8E0F9797
+:10980000A93B03D7DB9F247D3F77B6CB2C0872663C
+:1098100069BBC48200E2E9A79ECF40F9FBC99EE77D
+:1098200033E685C117D94E4BBFAB8DD7F198D70220
+:10983000E3CD63DA78A1341C6F9EC7FC21CA0FD632
+:109840003ED9DB1F663F90840CABCF367B497E9FB1
+:1098500083D5887CA7B53BB724CA8B76E6396609E1
+:109860004A30D4BC5E3964C6FEBCDE5C17D0BB4156
+:109870006B1FD17FA7E01FA9470AD9A17E74C90039
+:10988000C9DBA516DFD154285A8A7484FA53918E05
+:1098900012F2ABD784F356242ECFCF387C7767C132
+:1098A000BC1676E8E9989EE5E0F375B8B83DD86057
+:1098B00053505F24B6326E077EDF10447DED8A8AF6
+:1098C00019CDC08E31A5B86D28A7AECF8F6A33C42D
+:1098D000E2F78C20D64F4F29A476812ACEDF81442F
+:1098E000166C95B0CB2689EC40473F53E07BDA04F9
+:1098F000E6580FD9DE2C6E27BA9967B34C7662B75B
+:109900008476A286074DBE23DFA0DC3B2D59886FED
+:10991000A45E89EC3ED9D03D07FB1D898FB644F08B
+:10992000D1967F321FED1A918FFC2AF191DB323CE8
+:109930001F81DCFC46F559C0A700BE9204BE1E166E
+:10994000F265E0FB16A21BFC4838DF5AD15FADC5BB
+:10995000169247939CF874507E433FDBC0FEC47D53
+:109960004A32DACF90A6B6CE55B9FDDED72F417F69
+:10997000D1575948EF3D60E8CB423B3FA9A8691F4A
+:10998000F247D29C92B256B24FD29C28F751D6E001
+:10999000FC1B9A27F9B81D00FD221FD599683FD1FD
+:1099A000706FA58FDB0135B43E1A375855D46793D5
+:1099B0007AB356217F34AE04FB08E56F4FD7964546
+:1099C000906F9865F3A09D62B5CC2CC176AC5DBF5D
+:1099D000CED649DD641707A6320FCAED734143C0E6
+:1099E0003806E56CFF8E1FA11E5F5AE209A8B8DE9B
+:1099F000045FE632D20B9D4E6F721CE0F5E0DF642F
+:109A0000DA17758E853CA42F097A76D679939D90C6
+:109A10009FB7C14A78EFECE2E5E7EC8020E83F45EC
+:109A2000E6FDB1580BD73397CA030BE23D7102D361
+:109A30007E36633E45CB773C46768CB6DE3BB3380C
+:109A40003CF6125F165ABEB7ABE3FAA260BD27CA56
+:109A5000066D531440BB3B1AC7E4792F0EF7A801DB
+:109A60000049C1EC7F6FAC9E189EE7F587DA3F3066
+:109A7000A33A8DF4EB6039820D7A57CB7BAD00C7EA
+:109A80005AFB50B902F6A4A54712ED27CC980CAAB0
+:109A9000F89C24C60F281BBD808F87AD4C375E38DD
+:109AA0007C4A44FF46E8DFA68AFA8152DFE45C8004
+:109AB000B74C6BBFAAC30BF03D6CD4F7472815ED2C
+:109AC00031A38DF7EBDCD7376E481BD2FF600FD880
+:109AD000B3C70FD9016BDFAFED180363453B3E37CA
+:109AE000A17ED5F479A34B223B2372BD2665F3F505
+:109AF0000A766D5236C90D6EEFD6A2BD2B939D3BF3
+:109B0000059756E34A1F43FB12EC86D46CB21B3E0A
+:109B10003D7908BE77CE384D767EE34585EC8F469D
+:109B2000B03FD06EB7F4727B96F51849EF6A74BFF8
+:109B300053C89F4E27E87DE4D397A5F1C8A78C357D
+:109B400065DC043468C9F6E6211CDA7E2C12DEEBF3
+:109B5000B2B95DDE5858B5251FFBDF2D31D4FBEBC4
+:109B60000B3F4A44FBA4B1F7C3C48561ED96F63CB4
+:109B70004A7858BAD738ECFCAFCB9669FE0D2F1C4B
+:109B8000F0E27A3F1D94682D2F5182EBD0AE5CB28B
+:109B9000C480961A2B0FCEBD15D73D9B6D627930D0
+:109BA000BF5CD44BB89FD83B33700DEEDBE0AF0405
+:109BB0009FB6FA16D1FADE3ADB62635908E7BCBBFE
+:109BC000090F8E282FE2617D6155328ED35037C543
+:109BD00081FE9346B0B3B0BCE1DEEF923F45836BAC
+:109BE0007D8FB106EDAF0AB0B7FE15E04E8F9B56E4
+:109BF000E381F5982AEF1BBB02F29B4690BFBFC9D9
+:109C0000E1F46C937C81EFE0BA7F41627BD4A1F2F6
+:109C1000CC1E6ED7DD9CCDED40EDFBCDD9DCDE9CBE
+:109C200018E89B84BCF78AD21F8DF66F23F37E86DB
+:109C3000FB4EE6B3A97B884E5CEEB85A54F22B5922
+:109C40005CFD0F8CC1F2890AED2798D2FF088E7B4C
+:109C5000769DCBB39E09FEC5FCBD2541DA3F64FB72
+:109C6000E7237D2B841D79F6851BC6CE2B19B29375
+:109C7000D6755983AB010FEBECEA4F6A50BEFD4538
+:109C800021F9C62C037D93901EFF1547FDAEB30648
+:109C9000D721FD031B8D54BE2FC5DF807C79AAAE72
+:109CA000261FF7C1CC16C8AF037E32BA3A18DA0BBA
+:109CB000B07D203F83C5E5632AE42705E62A12CA62
+:109CC000F908FB6312FA7968DF0083C3F72A21B62B
+:109CD000F2800B4E5A6809B47D153F648F1CFB72ED
+:109CE00096821F353BC560F12FC5A6D5B3A3988CCE
+:109CF0007CBF66E0A801E613EDEA233BB6BE5BA29B
+:109D000071EA0B9F33A1DFE4AE6EBE2E1BC53E0091
+:109D1000F09781F6C0DAEC68A1C7DB38BFB33EDA52
+:109D200047B367383D19837AF6F0FDC42AAAA7F530
+:109D3000675ACDFD5EF5C21F037290CA7F922D89CE
+:109D40007DED6A9176F0548CBB49EAF3CA88D7B1AD
+:109D500092279C6FB4F429212F620F0F4CC1F53B61
+:109D600000FC857E992D52DDDDAFC1FCB68C2FF253
+:109D7000A009E5067692CBF03BB022E0BDBCE7B38C
+:109D800029C8376070D37A6DE8A994EB6DA4B769E0
+:109D9000FF9814DDD485E5497714925E8D1AC7EEDD
+:109DA0009801DF7F2EF09A6CE37E2EF7EA40D6F220
+:109DB000121CDF77F76B387E6914F929938036F629
+:109DC000384ADBD12FE466AB24ACF7680CEF3FC117
+:109DD00020DF5157427297F2711EC9BB13D29E6C9D
+:109DE00027F76799590DC289DF693F069C81FB59A6
+:109DF000F473613F49393C3D9B1C5250406C65FDFA
+:109E00003BF6207FF6981D88A7DA9E5F1E477D5996
+:109E10006B61DD32DA2B1176C6CAF49987903FCF99
+:109E20009D39B9E37EF8F6E84D073D7EA28BDE7ED4
+:109E300088DC2FECC42AC923DB7BBFCBD6DB7B833A
+:109E4000F97FB8BDC7EDFAC09E68754F983C6F1496
+:109E5000FBB4734BCEC7A09EF97890BF404F570C10
+:109E6000D92BF376477F88EB6AD0EE8FB01B8E3DFF
+:109E7000111D40FA9FEFB6929F4E41BB07E0396338
+:109E80001FF80122C765F27925DC3FEC337A56438F
+:109E90007F8D779EFEB901D69DD205764F2CDAFBD9
+:109EA0006A2CC9D9D765B607ED32C5EB40BF870626
+:109EB000BFE29CE2F696A05CE4F35F660AE5931DC0
+:109EC00064624B281F13CA47BBE725A1779645411B
+:109ED0001EBE37BBFD7F41BAA598B9BCC276F8BD9E
+:109EE0004BD85B5D801207E2E538ECBBB384FEC65D
+:109EF000FDCF83E9C1F5E4C7B1103D3F7EC5BC137A
+:109F0000FD3C1F171A4226EE97203F96DAAEB0644A
+:109F1000A8AF1EB70655EEEFB21840FFCF7FF8AEE0
+:109F200037705F31FF15EEC79A7FE7CAE9B8FFF8CF
+:109F300078C61413CA9B85CC4F7EE7C58CFBA197CE
+:109F4000B220F757338701C7BB0BC4C6561435017F
+:109F5000C0FE55F05932486857A86D9027A3D9DB49
+:109F60005103E3CE6B33D0BE647EBBDE9F7E61FDCA
+:109F7000DD35A8C7D7B619B8FDD82E911E9FCFBC26
+:109F80006EB43B34BC16E4C473FF689BC18BE35CC6
+:109F90009F6322FE031205697E226D330A3FBC8057
+:109FA000631533843035483C5DEB506A86D3CF5A15
+:109FB0007F6DC6260BFAC306D20DE407BE60F2CE53
+:109FC000263F6A5C3E433F629BBDA9BD8697D39AFC
+:109FD000B9601DF051F9B50A37F8981A87F2323D89
+:109FE00087DB0F91F35DD8A1CF479E4F2C0DEAF38D
+:109FF000F399BF203907FD46FAEFE9395C5E5D58F9
+:10A000009F25CE013C740ED06654DFCE4279B54E0A
+:10A010002179B92A8DE3CB90CED36C67F56CE25FE2
+:10A0200027D817042F873FFB5A97847AB3CDC9F9F5
+:10A03000F27F0A7724BC37E4E413BC6D68E4C1788E
+:10A040006DEBA420C71787FB4AFD174B72F47268AB
+:10A0500030FF8FDF77727E5C278BF5E6203934CFB7
+:10A06000C1E7F4B1E4792284DF6D601F00DCF3D72F
+:10A07000C96568A74C9A69A37934BC62257F6BFDDA
+:10A08000CAFE0CB267ABFAF39B86C12B42AB68F2F7
+:10A090000BEACD73C13E01D76DBBFE9C0A342D0B7C
+:10A0A0003F779A99E6BD2F2701F7231FEFFB25D2B3
+:10A0B0007B9F95F413FCEF9019E5D70B596437E5B6
+:10A0C000A7F9EFCF41BD1E15DAF16416DA29DC4E8F
+:10A0D000AAEF3577A11D38AF2DECDC0BFFD9A03FDF
+:10A0E0000763ED71E4DF609DFAEF4BB645B4BBE466
+:10A0F0005C8CEBFB4D26FF28B4EFAEBFCE9B8C7281
+:10A10000F5CC520343FACE973D8B508E9CB1EAEDCD
+:10A11000EF33764EAFDD8374F6E4239D778F486787
+:10A120004F3ED279BE81F9C3FBA9473A037D970917
+:10A130003A9F3970553ED2F9D37D57E5239D3719A3
+:10A140003BBCB86E7665FAF7221E4F4CF691FD04C3
+:10A15000F22AFF9BF0E38B11FCF8E2FF1E3F52BB9B
+:10A1600091F4E1D19CE1F5A1CBA4A6A13C9C67317F
+:10A170007FAD5EC49F61FD6B1633F9255EF9F2F386
+:10A18000879E403BA457263B44EBEF15C59F837E3B
+:10A1900085578EBB3D0169E4FEEF16FB18B78505B8
+:10A1A000D0FFA1D9FD9AFD18298FDF17783C9DE3D8
+:10A1B000FD36ED1785BF7689E8D312FC9CDBA9BB81
+:10A1C00025F2C75AD46E2FDABD0D2FCF75A0BFF67A
+:10A1D0005490FB671B0E8C25FFEDD2E0ABA154B46D
+:10A1E0000B7B2507EE1F96EEFE3006CFBB613FFAD4
+:10A1F000494ED87E74B2D88F9E0A7E1C83E7E23027
+:10A20000FE54D4CBD1AE0113F26F03ECD3A00A6B92
+:10A2100050068E627F0D2EE609A0A8E8D1EFDBB4D0
+:10A22000F3CBAD3E13C9BBADBD5210F76989267F94
+:10A23000561AEA2796E6A0732EB15EFE33C79B98A6
+:10A240003B3EFCDCD8FB971C7EAE4CEDFBB7C4124A
+:10A250001FF61B9997EC802D7621971492537FDE81
+:10A26000E6A47D0FFD40FD3F07B328AFE9EB450AAB
+:10A270000B2980F745B3BCEF21DD507E8722E477C0
+:10A28000787EF03C9AF571FD02F23C34DCF9B83886
+:10A29000A7C6F3DDF0F60D6C80DAE139AFAE5F6D85
+:10A2A0001FC09AC6AA00F75DB7DB3C68BF34025FE7
+:10A2B00037970DF1E13231158D0F1B849FB771C9AE
+:10A2C00047B41F68EC911CE8DF5DE6E17CB80CF652
+:10A2D00049E6D197AE5BD60D7C1806F748EB785C63
+:10A2E000AE7E1D0FE6FF49FECCEB72F5EB579BBF30
+:10A2F000E6171F9C67AFC4D757C4BC22F79791FEDF
+:10A300006C6D7F78A572EDA6087CDCF4BF8C8F9114
+:10A31000E4DADCDC91E49AFEBCE01BCBB5C87383C5
+:10A320005CEE07C773033CD7FD9F9E1B7CA276247F
+:10A330001A480F7A75E7A968A7E338EDDB65B20F15
+:10A34000A6C8FC1CBADE6E263F6DE4796BA33A45C5
+:10A350009C2FF6FDF66AD49FFB8D0CF5FA12DB629A
+:10A360003ACF6C949F3139D461CE19954364BF7F45
+:10A37000D3F3F775B983E7EF5978FEFEAAEDF378CA
+:10A380007F185DAB4AC0D02FA1389661E5F62382D5
+:10A390004FA245FC844509306758FB91DAFD34979C
+:10A3A000DBCBAF8A381AB789B5637CC6C3F6682F92
+:10A3B000EE4BDC061EE7D392EDDB8E72D2A2723C2E
+:10A3C0003FFEC22DCC00F37FDCD84DF224506FF35A
+:10A3D000A05CD4FC305AFF56B15FBD52FE3F30C87E
+:10A3E000779CFF07F3FF2479F06FDA78DFF49C6C39
+:10A3F00033E046B74E189D87BD81E73B5997F2F38E
+:10A4000048FD8CC4D76FE7FADECC25B9E01D4DE7D7
+:10A41000FE572877A2CB073E467F0FDB6F5671DFD2
+:10A42000817E0FD2971B92B91E533C158867B0F7F7
+:10A430002A304EEA03FCEFD523DB87A706E513B7E6
+:10A440000F4F8D289FFE3EFBF04799BED3C867276C
+:10A450002ABDF9A83FD7DA017EDCF73DC5E36BB62C
+:10A4600059397F6E93385FB2E678CD7F42F30A3C6C
+:10A47000CBCFC723F98AE5E9F96A30FF4F96ABB62F
+:10A480004138FE97E5EA92FF8A413FE8C8FD04881B
+:10A490006E15557D84B7819725B633CC3FDDD8C77F
+:10A4A000E3D4D205BCDAF70BC2DE5D94E7CDC07809
+:10A4B000AF4FDFB358582C9842C8636897F96C7453
+:10A4C0003ED0D0CDE3481A56323A0F6E40FF6709AE
+:10A4D000FA05EB18DA7FCFA9FEC2BCF1789E610BBA
+:10A4E000C8B1E8379FC1D0EE3BFB1ECF37A8FE12A4
+:10A4F0002C6F5CD9AF3B87A8F8EAF335E8D7007832
+:10A50000C94FE042BF4D189D66E7F1F84B2DBD29BC
+:10A51000027EF4E313FF77CB41B417A3D53E3A177D
+:10A5200068D8CF8DB80AD94BFE7B76571C433E6A5C
+:10A53000D85F39F635AA6F1D8BF66EC5EF6B1DE837
+:10A54000A7F8F45A17C51F64C8FD4BD1DE3A92ED47
+:10A550009F84F8B09707A7A2BD9A09F62ADABF9F91
+:10A56000EE9B3A16E1D6E4DF26F47F43BF9BEC7AFC
+:10A57000FF36B378B3EE47FFF7CE24DA3FEE4BF168
+:10A580007F1BE7BFC9CAE10D6CB4F2F52AFCDE916E
+:10A59000EB5F5BF749B281C649BACD42E7D49A5C1A
+:10A5A000D864647E4BCE903C1927E2E9001F3C9EA4
+:10A5B000AFB78EC78188BCCDA58F6B3C9D33791C0E
+:10A5C000C2332E4FA1760B2D0312FAE1178AF3F94D
+:10A5D0001B449C85166775C6E15B80F8602B6B8613
+:10A5E000CEE5B3B1BD83F3BF889F89BEC8EDE86CEB
+:10A5F0008789F8C6DECEF8B912F00DD267E240DFE7
+:10A60000A458984F6E676822E2F3958B06C2875272
+:10A61000F7069DA7C422D9A09F9C0DFDEB0AD09FF1
+:10A62000E278F75AA48BDAE1A842D43DA7FAEEC942
+:10A63000A375DE5488FBCBAADF1879BCE0CBD164CC
+:10A640000774662CA378C1B3EF03BF665DAA0FB48D
+:10A6500034C056537C6076CF3BE4D7B7EF97868DF6
+:10A66000FB7C38CFC6E36F027D1487C626BA081F6D
+:10A67000CACBBF0FA0FDA1AC53C893D166F41AACEE
+:10A6800048D7558CFCF0799D0E03D22553C49D9C70
+:10A690007BE5BF47FB69BFA2F9F1833C4EC8D8BF39
+:10A6A00006F75FCAAAFEEB6005B3FAFD4E4303FA54
+:10A6B0003D8D030DE43779399AFCA3993D39ABBF41
+:10A6C00005F9CC76079350FEBC785726F27500E664
+:10A6D0009937CC3C9BF38CB45E9497A30DA8B794A8
+:10A6E0008D8CE21415676215C1FD28E4A19FE582F7
+:10A6F0006FB4F34900D78DFA68519E7F37D23B5A29
+:10A70000C801D61C45FE44BBC2FD1EF6E6F79F5DA0
+:10A7100005F91DC21F7BF895E219E4BF5BA7484805
+:10A72000870BCEB9990EF8FE8B3C6E8FD8953EE61E
+:10A73000B085E3FF30C56566BFCCE3D61423E713CD
+:10A74000659DAB0BFD835FA4F929FEF4DAB6904C4E
+:10A75000E75B8E138FD4A861FB9BCD5C8F34ECE557
+:10A76000FBEAC8FDCCE5F4C7B13CBD5D3E98FF27D0
+:10A77000D925EF0C8EFF77EE53987E7F17699F44A3
+:10A78000EEE72EB1BF23FA1BC94ED1E23CAA86C622
+:10A79000217E78D5AED941015D1C4C958D8FCB2C97
+:10A7A000FAFE9F12F13B5A5C4C62ABBA0AE3CF0748
+:10A7B000EE63E46FD3E276B4389D4015DF47040CB6
+:10A7C00020F7B2F07CA883E27352594892683FD0D8
+:10A7D000CFB07D12C6E940FBFEBC6C827F3BF3B478
+:10A7E000CB24175509E1B7627C473CC21DDCB20897
+:10A7F000C7BBC946E35931BE239EF611B48E537CC4
+:10A800003CAE73D2121E0F9A02FA17F329B99C2F8D
+:10A81000ADB34D14E7A9C56D68F11D1A5EAA04BE5B
+:10A82000530A1665E17E418B03D914157CCA2A634D
+:10A83000FC8790FB4B0D24F7B5F8BACE3C3588FC6D
+:10A840007E0EE3406D571EEF11895F2DEEE3FA7423
+:10A850007F72FE788AFB203DAAC56B68FC1246C752
+:10A860008015C6DFFA32B7DFAB969808FE734BA7A8
+:10A87000917FF1DC5203C37554D56BE6FC1731DED2
+:10A88000D6D92616C27E95A015E5A7C60797B35F51
+:10A8900081AE85E8BF3DDCB237E704ACF9232DDD9E
+:10A8A000949EB34ADDF2184C07E6A0A41AFD64C6D4
+:10A8B0004CE56A8C6319C8908075CAF6E6CEA27C16
+:10A8C000C2C007989FF6E4AC590AE8897379033B44
+:10A8D00024A8EF2FF87026E5912753189BF0C46F3A
+:10A8E000660668DEDC1F3549F8A3CC4EFFB5F909D2
+:10A8F000785FA07F4D1FF97D78DC3FC605223DDCE7
+:10A900003613D9376E118FC9AA457C269ECC40BE1E
+:10A9100035792C9D67DB98BABF0FCBD3CC5CDF3386
+:10A92000CECFAD79DC5F4C2A1265679AE65FEA0FFD
+:10A93000A0BC6ACD7252FB41B9BADF1CE47E2E3E48
+:10A94000FE5B074AE91C4A8B3365CC913EAB94E22F
+:10A950005174F987ADFC5C94298E74B41F5A8DC272
+:10A960004E15F9A834FF77F3C3ECA4B726FF4B09C3
+:10A97000AE8733077F948B72EA0613D8F1C3C8A55C
+:10A98000D4422E97CE196DED12D86D6FA4FAE7233D
+:10A99000BE8E47CF99E28479CD8EAF343911DEC0B7
+:10A9A0005332CAC904416FE72C0E9FB3DA272D84B6
+:10A9B0007E5BADB09EA17D825FF192BDEE9F25DDF5
+:10A9C0000470B74AC27E676A2CD9ED856A2C9EFB5B
+:10A9D0002D6B7E87E2AE652107642107DE6EE9CF2D
+:10A9E00055F240E5766F94D1DE7E479C3FBF93C51C
+:10A9F000EEA81B66FFBB299FDB873364B514F9C83B
+:10AA000075FFC4776A812F64932748F44BB7ABC8AE
+:10AA1000EF87EC15EE7EE847CABCAF1CE3965BD32C
+:10AA2000EF2BC7B81339CEE3F685E537E5733EAEB5
+:10AA3000C67A88B7E8A672D463FFB0FE62A1BF925F
+:10AA4000BFBFBFC17ECC1CAE6596810C05D6A7C723
+:10AA5000EDDF8A74BB30F7433A8FFD41CA5B1F605C
+:10AA6000FCC45BC68E49312887B224C1B7DC5E3B8B
+:10AA70005AA0F93D79DCFBD162EEF70439C4E32B2F
+:10AA80004BF93D9BDA598CD673AD88BB98E2E0F761
+:10AA900096A69467795A616AD3D98082727ACA710C
+:10AAA0005F0CD28FCDF297FB4A47B6C398DBA886DE
+:10AAB000CB95A96A581EFEDE58A8CF7FDBA3CF7FB7
+:10AAC00067C25F0BC2F31BDDDEE771DE2F493C8EF0
+:10AAD00033703573D03C5D5200EDA5E2E753BA8484
+:10AAE0007F97E20D7F26F673CF4F60549EB8D7B2A2
+:10AAF00013EF1F687E72599417BB9925338EF0416E
+:10AB00007A764012718B2E3A0B6207EF7670FC4119
+:10AB10005D13F47370AE4AEB38D16660D7E15A2FFB
+:10AB2000B790FDA4AD8B562BF037E0B122D512853E
+:10AB3000FCDE6AF46CC6BEE428B38A7AB532C6423B
+:10AB40007DCB3F56482FADB29A29F4F5F08351944E
+:10AB5000AF50980FE33500C45998BE65F4049B705C
+:10AB6000BE500FE7DBEA6424AFE40A13E969E89713
+:10AB7000E87A78A321C868FE950AC5630A98B57576
+:10AB80000723D1F7C7C4BA960D2C44722CC5427264
+:10AB9000EC08F48FFD1E7E5DEE223F5BA17A3B96B2
+:10ABA0009FB714D0FD9CC6C17B478A01812B1476C8
+:10ABB00094B397DF0FD3D6B3265F22D73348C15C57
+:10ABC0005722E320AAF80F4C2311F53E237B5E3B6E
+:10ABD0003F4CB768E58A17C7491EACCFEF67258A97
+:10ABE0007C6A4116AD37A8123294A1FDF1CBBF208B
+:10ABF000DF6AF261C7DA1F937CB814FF85DFA7FC18
+:10AC000034BB83E3BF200DD7A11C559086FAAED587
+:10AC1000E9517D61F9425846B3E3103F500FF233DA
+:10AC20006B3ECC55C2FC83A9052A094BA8E78D07CA
+:10AC3000380E5BD5345CAFC38C5BCFC78DFEC78E3F
+:10AC4000EB8671A1DE613B8C0BF5765BCD2143CCAD
+:10AC500070E34F5071BCCB8D0BE824A44E137806E3
+:10AC6000BE08A05FEAB0DD40FC394DC4EF1E4EE0E7
+:10AC7000E3B1427D7C4D6E148C4FFE587D3CCD0D72
+:10AC8000D2B636D4CB8F596376223FFE52F0C9D16B
+:10AC9000E81FE7A25DF5CB39F94750AE4C895DD589
+:10ACA000864C328D7593BCD1E4DE85E40F2B300FDA
+:10ACB000F2EF9A02A0FB0FB2DF9A839D1F713E96BE
+:10ACC0008BFA0FE4C3B70A122E855FE3470D6EE4DB
+:10ACD000435C07837C1801BFC6476C7A3705206E3A
+:10ACE00007BB1453CD4E65AC89C789ABE943F30369
+:10ACF000269E6269E2F3581520B86F703E42F168F3
+:10AD0000D78EF2FB10DED9633ECB50B0B27B6E0122
+:10AD1000EEC300DEBAFF9FF046DAE5978B97D6E0E8
+:10AD20008A5CC7DAF8D28CBD142FDD38CB46F1D35C
+:10AD30009344DC69E31203C511C1FE8DECFE066687
+:10AD400009A21CBE46D8D15A1CFF8B12F77F060EF3
+:10AD500098D53D61F6F8A571D42AC5690756F278F1
+:10AD6000EB417BBB9EDBDB837A4DDC1BE81CCB65B8
+:10AD700079E7DD2AC553BC24F1FA81B98CDBEB7588
+:10AD8000A27CA143C45BC05C1287E2D93BBB18F133
+:10AD90007FA73D9BCA5364AE7FD8B7B8FEE9CCE22B
+:10ADA000F664E7ADF9540EFB825188F7F932D8CF3B
+:10ADB000FCFC9EEF0FF2F878917EDA4D05DC2E1B3D
+:10ADC000B473443ED22FBB2BD3BF05F965618937DD
+:10ADD0004302BE9A6FE27E57E0BB6D7867A6863568
+:10ADE000ED5672F0FE45D3BB861CE2BBC789EF8AE5
+:10ADF00081EF72747C172C18CFE52F0A538DEF0664
+:10AE0000F9AD30325ECEFF148EDBE9ECFE7D03EE51
+:10AE10002B7ACD44072DEE31729D87C173C2C8E1F4
+:10AE200071C932C1B36F3878AE84FFC3F92D89710F
+:10AE30003E1F691D24292C602F1B5A071BDDFE10A5
+:10AE4000C23FB81ED6F07DE42570CB36E28B9B6FF7
+:10AE50009539BF46737D8EE74DC9307E9D18FFE65C
+:10AE600075BE6A27D6AB93080F75BDF51417C6AA31
+:10AE7000F9B99107FE203CAD42CE69E75BB345FBD3
+:10AE8000998E3A23FAE366D5EACF9966DBF839D68C
+:10AE9000CDB38C1F85DB3DB3D986CF308E71369E06
+:10AEA0004369F5818FDE2F183C872AC073A823C21F
+:10AEB000CF720EF81AF9FEB584C5DBEE06BE2BF88C
+:10AEC000694919FAE326272EDDBD11F24F6E2DA236
+:10AED000FC6B89B7DDF31696EFC8A77CB541223E1F
+:10AEE0003D57CFDB1756DC3A2D2B06E5BFE817D7C9
+:10AEF00013EED7A3FC9D7550CF3D3ABB0CE34BAB93
+:10AF000085DFE0DCDD8CCA6F1C63E721BB8B55F26B
+:10AF1000FB554789F2EFF17EDF18FBBB328C33AE75
+:10AF2000CE1E9883FCFD46D94B45983F227D36675F
+:10AF3000B873AFE24229340AF0521DC7EBD7963DF1
+:10AF400095827E98EA2A9E2FF654AECBC172C3F941
+:10AF500039C3DDFF8D12FB9EC1FB6C625D3FEFFDCF
+:10AF600090EEAFF92C9207A7E89BF021F91D984DC0
+:10AF700072A0EBCCE7CD52D0CF3DC9CBE350AB2C88
+:10AF8000AB92517E4DF79BCA319ED861197B04E389
+:10AF90000C6227548E47BA4EB230A22BF0794C2166
+:10AFA000FAB5AFFA2C230699CBA6E7738D8FEA3456
+:10AFB000FEAED6F331AC4F57E1F8CBCBDB91F818AE
+:10AFC000C6CFC0F6B3BFA5D73783FD45ACB7C8FE23
+:10AFD000479203F8132E1787E0E8A6759586D17D72
+:10AFE00039B8EE3AB4753706E13019FAE81E4FA6C3
+:10AFF000E429A20BAD133C16D24711706BF0A58368
+:10B000006C636597C2853F8A662F72081C8E441C4C
+:10B010009797433B2F8B1B820BC6BF1EE9C0D67090
+:10B0200078B64B4D5C6E88FD81E6CF68D0E6DBA339
+:10B030009F6F4514BFD7EE46BF13B6738D2DFA3AF6
+:10B04000B81B853E9D65F13D688639DCE49C4FFC6C
+:10B05000700B683427CCFF6FA9FE3AC447AB147855
+:10B06000B93F8BFCF114FF01F49E5118660768701C
+:10B0700045E2A3610479180977241E86E8D3978CEA
+:10B08000A9761F6E705E11F369B5F3F53A30DECC28
+:10B09000DFB550C01485FC9B5211C5A16870BD2955
+:10B0A00071BF6440E2F78F347B2212BEC87B7A1AEC
+:10B0B0005CE8EFE3700CACC23B820F166A7E3E4E3A
+:10B0C000AF24019FC9200D7B1EFE60A141F3B3EAAE
+:10B0D000E819797F4DC39B16E715892F2D4EEB920A
+:10B0E00073B78873E591EA4960A7A7C65D8A47ED03
+:10B0F000DC2E6ED04FC9FD4003F7DA490EC60DFABB
+:10B10000298F2968DF4FF21C52D02EAFAD81090084
+:10B110000DDE147E1F0DDF0F64F8B71492DEEE1FF4
+:10B120008FFE959F4C7D82CEAB3E30703F7D247E5E
+:10B13000F68C809F91F87D24F8A3D27C4FE2B8670B
+:10B14000A4BE0A2CECCC16E742CC9F85EBC1E9C823
+:10B15000AA44FF11C8D7AFBEC24D2B16015DCB3339
+:10B16000FDBFC076B730DF64A46F5C8DDFC8CF4908
+:10B1700018F9E1978BFDE364A177CF6FE3F11ED55A
+:10B18000DE518F4D44BBF198910569DD7B497FDE2F
+:10B1900025E03F0F2A3684F59FB193FE5DFCFA7CD3
+:10B1A0008AE328D86C187A4F03FE8E0A46E9DED36C
+:10B1B00028DE1BA7CB9776A7E8EA8FE9C9D6958F3B
+:10B1C0000D15E9CAC71D2BD3E5C7F75DA3AB7FD526
+:10B1D000F12A5DFEEAFE69BAFADF3A354397BF7697
+:10B1E000E0BBBAFA1F0FFA0F84DD10F0F615C2BCEF
+:10B1F0001788795F7F719EAEFD9F62A61C437E5CBF
+:10B20000B081C7A557028674EF8B7470FBA209FE4C
+:10B21000207D27B3018A076C084A9E10C3F836BD0B
+:10B22000FDB1B4A78BF078B9FBF805AEB90634B917
+:10B230004F170AFBE32A76158F67FD7ABAE6B3BC8F
+:10B24000BF8BAE66B79EAE56554FD7E8423D5DED1B
+:10B250001E3D5D6327E8E9EAF4EAE91A5FA3A76BFC
+:10B26000824F4FD7A4D97ABA26FBF5744D5DA2A7B9
+:10B270006B7A939EAE99CD7ABA6505EED4958F44DC
+:10B280006F4D9EE6B42FD7D51FA4BB6F09C537E518
+:10B2900075FC50D7BF46F700FC41BA17301187F94B
+:10B2A0003FA47BE1283DBD416F8D1A359EEC8D1288
+:10B2B0004C671708BBDE37BCBDA1C99F70FD1EBE21
+:10B2C000AF1D492E5DA2CFC43E77447D16B1CF7D20
+:10B2D0008F81BEA5413690DFEA56C19F87A338DE35
+:10B2E0003FC7A2ABA11ED4990070BD8770C338EFD1
+:10B2F0004515933FE2BBACDB88FDDFCEFA289DC34A
+:10B300000628F53307E9EF79CC43E902E63309FF74
+:10B31000C4F45109E8B7E8AF40FD7F61EE5B1FD090
+:10B32000B9D61BF157F40EC547787E92C7D849218C
+:10B330000F4EE0390AE4CF5A07F5ABEA0AC3DB49FE
+:10B34000E16F9C3749223DCDE4288AEF9A778B4400
+:10B35000E744F3FE93A78B46493C1E24226D6DD62D
+:10B36000F0C7F7473B47A904471AEB16F61CF3DB77
+:10B3700072A81F7EEEB1CB44FB58B785C3F7ACC4AF
+:10B38000940971741D8EE8EAB670789E35320BE22E
+:10B39000F369E65791180F2820A2F83D8C22E48F1C
+:10B3A00079FFF95636FAE9A2A25E98557D359ECB13
+:10B3B0000456919FFC7B4CEF27BFBD49223FF9F714
+:10B3C000004E48DD0E8F1BED7C2DFFB080B71AEBD1
+:10B3D000C1F7247793847EA97F587FFB7FC8EBFD5C
+:10B3E0009DFD0DF6C3385CF883F4D3FC9E85061EE4
+:10B3F00027317037DF1FEDFE1EE3FEBBE640650020
+:10B40000CF45653094308ECAC8EFC7EF1CC5FD9E8E
+:10B41000C9AC8FFC0BECA866D7FA49FE9688FB17DF
+:10B4200067C5B9E2A22E0BC3389D927D87E2F01C5E
+:10B430007111F0601FEA61C54FEFBF946C792D8EDA
+:10B44000FBFD8C4EBC57A9E9FF91F9546127C3EE6F
+:10B450003100DF350D677FBC5AC4E3035A5BFA46FF
+:10B46000E139A006CFFD2DC7282F2B1E86E797F8C0
+:10B470003E5478FCA3C905E561F24EB141FB303979
+:10B4800064B4F9E89195352D7D74BE6814EF58AD1C
+:10B490004D5BEEF087D989874609FBC71260B84F2C
+:10B4A000E02A0A53E524CAB5FF627C1F6D76433F4C
+:10B4B000E1F2F362020B3F1F686F394EF0AE91FC70
+:10B4C0007EECC49CCB4256A08F59C1BBC0F07DCB53
+:10B4D0000DC7308ECB645FEE09A923E3CDEC562E69
+:10B4E00084CBD3B723E4E94F5A068A719CD6967E63
+:10B4F0000D5F0CCF6B03C9DCBE6E6DF984BE1BC043
+:10B500003E447E7B754BC12115CA3F80BFF8DE8E5D
+:10B51000D9C5E162175DA457E7083E405F5C3AF089
+:10B52000CF07CD46E2B315E9363A2758F166DE215A
+:10B530002FAC67134C57FE06700F8DC3F16412F2E7
+:10B5400014F8C987F2C194A2D079419C6306D1E96D
+:10B55000EFED4FC3AFC9CAE89D2453BA8DEC822BDF
+:10B5600085F36FA3F83B4083F6C94517C9FF150261
+:10B570002FDABB4F1FDCC3C8DFB3E25EEE375C518E
+:10B58000CFE81E026B869F8A21BED1F44C02BE50CA
+:10B59000031F3B5A60C541170FB55898BF00EC1008
+:10B5A0008CDBCF19A2638757716288C1C66A571DA9
+:10B5B000A60F4D38D181E2EFE1895FF4618A67041B
+:10B5C00038BEA38905D13EA6B37F18DFB904F23097
+:10B5D0007E8C288FF1F37CAC288F9DCDF3E9DEE7DC
+:10B5E000A46A042CE23C2BDD16373517E5F402C6BD
+:10B5F000EF818B7720B60B7D916A8BABABC6F2DB0C
+:10B6000019DD0BD1CA7F2ACA936D1FB5E7A01E9919
+:10B61000A56FBF45E021C9F651C7243AF7D2976B11
+:10B62000E74A09B6F3C7A87D89BEFC51D1DE6E3B5F
+:10B63000DF3709CB73F5E33F28CAA36D5C1E321FC9
+:10B64000E3EF1588F20744B915CB717C0F2F97B53E
+:10B65000773944BD75020E8CA923BFEB28EE77DD48
+:10B66000D1622921BAB45C24FA3CD4C2287F6B5140
+:10B670001CC909430DC7779C8BF383A3990DFB4E1F
+:10B68000C1AD42AEC5A8FD5EEF30724F2B8F73F097
+:10B69000771864B789F8C96C137243ACC741B921F4
+:10B6A00035793893713FFDE5F81A16DA05B48F3213
+:10B6B000E007F93AED1E03F387C9CB946551CC1F1F
+:10B6C00056DFBD204E974FBC3D4557DF352B5B57AE
+:10B6D0006E2B2FD295B35971B46E960BFE8A2A2920
+:10B6E000D3956BEF43B0DDA29E58BFC6DC6B74F5FB
+:10B6F000CE17AAB1C8E327A782FEA178068F05E579
+:10B70000C3727B7612EA9FA75B2610729E85750531
+:10B71000462B7BC6C9E3DC9FC1F34328FF598B97B7
+:10B72000BEEF817215D25DB0EE54A8DFD5E2A0FC69
+:10B73000E32D6E4AB7B7A894FEB4A590CAB7B47803
+:10B7400028FF18F48FE9A3D00F7E7FA4A586F21BF3
+:10B750005B7C947FB86536E51F6CF153FA40CB12E1
+:10B76000FABEAEA589F26B5B9A29BDBF2540696B15
+:10B770004B3B6F57C4F5CC33E25EED3395FCBE7C9A
+:10B78000241D3B8B841F52C4ADD887E2563A8B30C0
+:10B790006EA5BB9FEC702D6E05E74DFD59F9FC239E
+:10B7A000FB7BAA88DB6F45AC6F55345FCF743E9C42
+:10B7B000D7E3591D0D7C9FDAC4E990D53340E5C924
+:10B7C0004B382D9E12FCC95C01965641510254EF34
+:10B7D000ACD45715CDCFD529CE91B9619E15E2FDD8
+:10B7E0002662BBA001E1522670FDA9D17570DE4E24
+:10B7F0000E27CE7F3878F70B78E5F26EFE2E4B4D94
+:10B800004708D93ECADB44EFB25866FB420AA42E71
+:10B810009F9FDE8928BA38053667206F2E5EC75491
+:10B8200048D396E9F76D290BCA74FB22F9E2434C21
+:10B830000539602BD1EFAFA27297EBDA59D27EA80F
+:10B840002B37B956EBCAE7DD95B5C68DF84CE5E761
+:10B850004BE60DAB5832C0B5B07323C1F59198C714
+:10B860005949A5FBE5817D5ABC05DF5F3C29F40BF6
+:10B87000B36C207BACC0C9B3F9B10103EA874FFFB9
+:10B880003596E4D2138F1B82E84706F164C0F55F5A
+:10B890000C661F9697B27ECA63A80CE6C73255C6DF
+:10B8A000FC383640FB2BD85FBC5F8471ABB2FF71B4
+:10B8B0002BE4CFA4FB9FE4717321D29FF9829EF900
+:10B8C000DA7E6AB312E95FEE2F22FF8DFE7E5D9B6A
+:10B8D000D85FB459B99F6E95B32209EDD6B323C48E
+:10B8E00039DADDAF1E5D00F8B6271FA274D02FA78E
+:10B8F0001A86BD3FFE4504FF8F026617FCFF05F266
+:10B90000FF99F2B713D10DD5903B40EBE0ACE47555
+:10B91000CF45FCBE2E737E841D17CE4F11F855F611
+:10B9200055BAE7021E9537733C013634CE132DC746
+:10B9300073300E41CBE78B38DDBD2DC9B9D561DF42
+:10B94000D5624EC742D65783FAAAB0C4E00962C78F
+:10B950005E87CE8F61CDEDF0E27B084A19F3A098A7
+:10B960001BC53A56A3EE56FE26539C9572F86AA65E
+:10B97000C27EC6660B318C4BD3FA65C21F728F90A4
+:10B980009B5F38AA63E99DCB9441F9873A927D6128
+:10B99000F3F6211F7DD169E4F33AAC2F2FB471BFC8
+:10B9A000E1A242535095F05DB50E7AC751D921B14D
+:10B9B000B42C846312E1811D8C263E8CDE3C9A05FA
+:10B9C00060BD943BFD9662F4DB85D483861CC193F5
+:10B9D00050AFBED8B413EDB302C48B0DF1726B6ED1
+:10B9E000350E9D5B48F85D28E63DBE98D3AB2D3DF6
+:10B9F000021EE6F1E27BA78B3A353F8E7E9E0F96C4
+:10BA0000577D07DF856CED93B95A8BC0E77A63DF0A
+:10BA1000E8B9D0F5997E804B2638C717A30DBAB97F
+:10BA20008205488FF3F9D53F2EB1AD5924976A4866
+:10BA30008F8F37B0F0F3532D9D58CCE5EFB1221E18
+:10BA4000876A771F257E1CCA1F39BA00F0F1B481BE
+:10BA500015D2B9B181EF8FB5781D19FD0078AFA16E
+:10BA600058C845D6C6A6A1DE761A28FE54EE8AA28C
+:10BA70007BB3B253A1B8F7365BB5E34EECC7A1D0A8
+:10BA800039D11479621FDAD166A7611CDAE14776F1
+:10BA9000FEB00FE386E47485A1DFABCDA1703B243B
+:10BAA000CD40F1808AB3DA82E74AF9B6139588CFA0
+:10BAB000435D3FA07722E4EF8B981DE117330A9294
+:10BAC000B5B126EA3F90A688F766BCB56313C59169
+:10BAD000888AFBA19A4F70BF7DC471DE8AFB02D5B4
+:10BAE000B688FC81F715F37DA211CF0F21FFF8CAAC
+:10BAF000F34E945FAF77AD89CB427B3AA8902D523D
+:10BB0000F8D7D6147A0FA1CB44EF356878CD0C283E
+:10BB1000BA73C8F4667DDE1C711E698CB827B75CE9
+:10BB20008C8F2797A1B0F918DD7CFFC65C36DAFF51
+:10BB3000DC572CDEE914F97B447EAF3190E201FC46
+:10BB40001CEE5A9489F3BAF0829FE2CE47B2FF27E7
+:10BB500015AB62BC80D540EF0287AC1887BEBB85B1
+:10BB600079D0CEB30415BA07B047C8B35C1BE7FF62
+:10BB70003B4AF87A8D4C733BF8BA539E890A4623A8
+:10BB8000DD1CDD650158E7C5AF4E652AE8C15C875D
+:10BB9000D780FEF7DC669307EDCF29BFB0119F9CDD
+:10BBA000B7F1382EA5F90115BFB7EEAC2854C3E0A4
+:10BBB0000EB6383C289F76B6583C181B1F1C41BE59
+:10BBC000E6380D143FAF1A783CE72EB11E7715F317
+:10BBD000F788760A39B34B09CC403877013D316E8E
+:10BBE000FFD0066E1F2F5F65213896BF9E43F6D5A6
+:10BBF00048787BA2C5EDC94578361852D05F55B953
+:10BC00002E773DBEDFB1DCCEDF3796638B1EC3AB34
+:10BC100011ECD74686F67C6BCC359EF961F25D8ED1
+:10BC20009D58887C25CB8114F4E7F43C7DE1268C7B
+:10BC3000E705FA6DC57CA8F8839B307E77AF3D9011
+:10BC400082F1BDC78A3FE2E50981AD18DFDB577C91
+:10BC50009297A707520C903F5E7C9A97E705B662D1
+:10BC6000BEBFF82CCFE3D91BC8CE53C5E76F0AA0DF
+:10BC7000BFC5E4598202F9E7007F092CB16E919E9D
+:10BC80001678D1CA9FC3EFB001DB2FD2C8F283A2CE
+:10BC90005DCF08E52F8AF2DE11FA7F45B40B8DD017
+:10BCA000FEB068776484F64745BB632394FF4A94EB
+:10BCB000BF3142FFFF2EDAF58DD0FE6DD1EEDD11E2
+:10BCC000DAFF56B43B3E42F9FBA2FC3F22FAFF40AA
+:10BCD000D4EF17DFB3ED1BDE47FF7D36C811944B61
+:10BCE00085F60D71B8CE77B69713FFB756F0732A65
+:10BCF0008DDFB32546EF0EDF56C2DF3BBBAD84CBF5
+:10BD000071A584F339F0E1C3C877CBDF94299EA8ED
+:10BD1000D5E039154439BADE40F6C0F2D7F97E7D58
+:10BD2000F93A25187E1F486BAFC1BF06E103C66D07
+:10BD3000C314D6DB97C5FC9CD1EC767B6AC3E4992F
+:10BD4000D1A1CF83BC602877417E53DC78E1BAAAC9
+:10BD5000F6C2723CEB339005A2D45B42F88E886247
+:10BD6000177AC151DE5188F0D9147A3F4193F3CC50
+:10BD7000E6D6F935DA6C0ABD2727DB79F9945F4CF2
+:10BD800074A09DD5C6FC7D5E6CEF56C88E3FD45E18
+:10BD9000E640B967B22F70E0FAFDB894E3BDBAA1EE
+:10BDA000300AE5B5FCA081E4F711075FEF3BDC3C0E
+:10BDB000CE0AF40ADDAF0279ED411D51C042AB500D
+:10BDC0006EEE7DE8E05CEEE763F6B115747F493B0B
+:10BDD000579794B07D406D09C74FA6D0230AEA1744
+:10BDE0004877958B7B3701EE8FCA54983B35ECFE34
+:10BDF000706D89CCEF3D69E7A1722DBDAB95B15255
+:10BE0000D19D23A4DDA3CF9B22F48612A15772DA21
+:10BE1000414EEACE4F1CBAFCB74A849FC7C33C6868
+:10BE2000C74EF9C5069287E751BF4923CBBD41F9FB
+:10BE30002BE4F12E4400CAD100BFDF7E6843D9AFA6
+:10BE400090DECBD719E83DEB2B95A30AE218F090D2
+:10BE5000E797482FC0845270DF74393CE4197D7134
+:10BE6000F4DEC765F091F768791CCADB3CBF42FD80
+:10BE70005FA2372E83AF6725CF713FD2D11925EC52
+:10BE80006A6000F4DBC54575E1F9BE49F853B43882
+:10BE9000652549E1EFF58B7BB2B2E0E3FB99578D65
+:10BEA000CBC1F78A9AC8BFBF62DF3D6EB4DBD71A39
+:10BEB000FC0ECC1F8B9B3680E32C874D3FE26F2F0F
+:10BEC000F641EF72BE7D33FA4DBA8326ED5DCD109B
+:10BED000FEB30FE38FB4773BDD64AF897CD5CDD55E
+:10BEE00030DF6EC5518C266847C9E44D46B049F72E
+:10BEF00099D8607DBCEFF7F41183E8EFC64DD520EB
+:10BF000097F64531DDBBA5FBD0CF4EF9E99BF09DFF
+:10BF10005218EF4619F6663B9F99B5C976F5103C65
+:10BF2000BB9FFDEEA655E8B013FB1427E3EFCD9FB2
+:10BF300051FB6390B4B05F595F82FBF5AE1389E1AA
+:10BF4000FB75AD7EACA8DFD03BD0F08C4AF53B4A08
+:10BF5000801FEA7B06624A08DF0315E1F563841F50
+:10BF600020ACFEA6AFAB5FA8C1F3CCDB3797F0FAED
+:10BF7000DBB0FE59B53F91627A22E089BFB4FF9DE4
+:10BF800004FF08FD1789FA67426F53FDB3AC3FB158
+:10BF9000348BDA3D85E39C7BE3ED0A31EF443CC70B
+:10BFA00079D7E6FD197E6FC13E707FA734A9F8BD31
+:10BFB000DBD2E140FBCD6AECF0A11CCEC5F7C72671
+:10BFC0000CA5CFA2F2187FE9F7487EEEB6B0F85A7A
+:10BFD000E4D76603ED6F7AFA0D0F205FEE489BE819
+:10BFE000C0FDF33E535F5909DAAF076C64BF1A32E4
+:10BFF0003FB5A2DFDC5CC0D7BFD5D9E42981BC3511
+:10C00000BD84DE0F95EF5DDE4DEF98DFC7DFF752A1
+:10C010007E6CF2EF46FE0A2D2F5C18B6BE7797F2C3
+:10C020007B96EB5EB36DC0FDC13AA3A7A300ED7094
+:10C03000BB42719FCA8F0F4E23FBF0E70646F21FEB
+:10C04000E65905FDB6CD55E8F7300C94CEEB2B2123
+:10C050007CF87C55502F234191F07ED0FD8ACF8211
+:10C06000E71D6661D7EDF0F0FB61DAB81784FD7962
+:10C07000A184BFB7B623EDC27B8B5DF8FE8389EE4A
+:10C0800075DA961942A618BCE7B6F3D462A46774B1
+:10C09000FF3ABCE71C95A238707E3FAD85323A97D7
+:10C0A000EBA6EF817A03ED1BE29719BCE87F8CCAFF
+:10C0B00035E9FC1D361827DC1F1233DAFF47A4E7E9
+:10C0C000B837951B11CFEEBB0DF43EEA83EE772D0A
+:10C0D000068033A65CDFDE3151DF3EAE5A5FEEAA4A
+:10C0E000D59727CED297BB6F3745F875F4F9268DD3
+:10C0F000AF4026D8404F45F1221665BBD082FB9E4B
+:10C10000B5AF4531A2CFCA4D1D05B83EA307085FA4
+:10C11000514551E417589B6C22B9BEB694FBF50FFC
+:10C12000A79B6EA43CCC0BF96347DA51DA8F5C8293
+:10C1300017DBA9BF62FF3616F61DFDF2A3BD9652AE
+:10C140001E57C3DC15E8C763240F9F95BC9E438828
+:10C15000EFB7B8BF624733F7633F388BC741D20CA4
+:10C160002A70BDF3FA31960D7DB82F8BB1B5DF8DF6
+:10C17000F19D91784D14E70D3BF0762FF29D9FBF16
+:10C180001BBD46BB6785DF2BE8D604BD8B366BB481
+:10C1900078EF4FD809B1EEF892B6B0FB1A89C26FAA
+:10C1A000F2F0C47956D41FFBC43B2283FDA9342886
+:10C1B0000F79457F54A9E6AFE1ED3769E73C229F4F
+:10C1C000E0E4F97D47E26EC4F5B569565C19EEF717
+:10C1D000D70AFB2E36CDE41D05F37AE49829208D8D
+:10C1E00081BCC28E18C12ED817C7C735BD1E15C059
+:10C1F0007B818FB8CBE99E61AD80FBB94ACF3BB85C
+:10C20000DE07601DED84FE1F7179AC65E2DC340051
+:10C21000F051A8159828876ACB68BFFB88D763457B
+:10C22000BDF9489AC78A71DAD664C581716B716E9F
+:10C2300085DE897BC4E277A0FD13078AD484E749B1
+:10C24000E91D53E97E1DE0DA50C18F1A98886FC44A
+:10C25000F8C27881CF1DEE050E7C97C195BBFF5FBC
+:10C26000D04F1F8FFDC5F0768827A7C0D3AC52955D
+:10C27000E07689FEE3173C47F5F1A7AD22AC3F41DC
+:10C2800047D35416C47D9A36BED6CF60FFCC4BE759
+:10C29000006B7EC5F1B62A9DBF8F65BA8BD17EEE4D
+:10C2A000B94AFF5EE4B381E428927729EE942AE448
+:10C2B000A394635B67E0BD8B35BF8AE2E32CE4FCAB
+:10C2C0009EA230CB7538EF04BF03F118B95E938F8F
+:10C2D00074D421536A74895CBFC90A6B97E32E5DDD
+:10C2E000C7C96E5755FEE861D673C47A493E36F029
+:10C2F0007DEC3F725D6F8FFE602CD72361DFE5CB55
+:10C30000E7DBA4FE75248793155A67E911E3E13B47
+:10C310007B98979841C5B8E8DDA54EC1C7A0974A5C
+:10C3200091EF1D936CFCBC9DF8ABEAF90DDFFD3578
+:10C33000E42FE0EFF3815AA9C73AFA482FF6F80B39
+:10C34000B0FE36C5FF38FAD3B71D4FA2F72BCDD1BB
+:10C35000FCFD5153C47B299ABED85DCAFD486AC40E
+:10C36000BB9BDF34ED4E4B2B7678B0BFB77F6B496C
+:10C37000F8C7DB3F6947BA57D9604D3F5372F32680
+:10C38000BCFF6C7D93973F0DF980827859467E976C
+:10C39000C31977D2FC5BDF33933FAB54F66CC63CDA
+:10C3A000FBBD95FC717B0F4C9C8DEBA4D55EA1A2CF
+:10C3B000BD7F40ACE37F1569E4BC6493C78FF64052
+:10C3C000E4F7674B35FF9BE77817D0B7749789DEA2
+:10C3D000711A8C8FE8B2F2785461872E10F26CC11A
+:10C3E000C1F5198718BEC351F75A29B45F60AF4E23
+:10C3F0004478522F4ACC0FF26F9B389F4D753D27E2
+:10C40000A19C49731DA944799FCEFA56A1DC486FBF
+:10C41000D29F97A55E54A8DDBE142FF5873F18075D
+:10C420006A62624DC7F9D92A94F329FCBCC5E48835
+:10C43000E271A1EE6ADD3D6AED7DDBB7851C350159
+:10C440004E8D6590DA147E6F3FA2FEEF443D19FDDC
+:10C45000F6E8FC771C3D4EFDDA944FC3E34D715F67
+:10C460004A426B193FFF043C05701FCA62E3F8792A
+:10C47000A9D7AB86C7DFA682DC359761FC4980E28D
+:10C480004492C5BD082DAE0730E044BF9B16F7B1FE
+:10C4900093E9ED112DD5F6E7B9CD32ED3B8A5FB5C5
+:10C4A000F2FD413B0B5A25F48731923BB91BF8F959
+:10C4B000B4E617BB0D1713EA257C0F97C6EBA63819
+:10C4C0006ACDAE02FA92DC5917F1CE94F68EB661BF
+:10C4D00034E78B6D2D0EA2A3569EE68FA4A3FE9C7F
+:10C4E00053AB977A3195F9E3C3FB0D527FA9CDFB8E
+:10C4F000891F522F6650F9B616F532FD678FD07F2F
+:10C5000032F1CBC8FDA751F9F6D0BBCEE9808A9FA6
+:10C510000EEC77FA54942BA1A99E61F09C7A8F5E61
+:10C520004E8EE9D1CB5D0D2FDB14AFAB0EF0BDED20
+:10C530001E83A78B61FCA9BE5E4DD66F9CFC5D6B14
+:10C54000AD7EC83513EB2FE3F5BF754A5FDF577932
+:10C5500020B23EC177FD457DBD48FA44C20B70252F
+:10C56000DC1406D7248BFEF7DACD9E7B095C09B775
+:10C5700084C175835B5FDFBF6A78B86E2C347F2D12
+:10C580005C5ABDEF4CB8B27A91F39859631E01EF33
+:10C59000BCFE2DB3AFACDFDB967C7DBD3B9A23C7E1
+:10C5A000096871DB3A7B24BE99DBEF0E36407126B9
+:10C5B0009ADD11C71C22FE8BDB0DEFE07F93197B08
+:10C5C00060B46FCEE804C4BFF7F64755BC1FC3F58F
+:10C5D00015ABE5EF56C2BEA434FC5DEE21B8565350
+:10C5E000BF2F61BC13E9598B07EDCEE25466494673
+:10C5F000E3CB1DCCC6F7C7EA476BF29AC79717097A
+:10C60000DC3D9BD2BDDC49EB3C1887F07CD371EF5D
+:10C610001DEDBD67F4F8A1FA23F95B343C994CDDBC
+:10C62000F47B1D06EA6D1ED40FEF6211B4DB75B307
+:10C63000398476B516877A3C7ACED10495DE3D589A
+:10C640008DFDCFBE65EA1ACC4B87E3D5E536BC3706
+:10C65000D5AFDD2F5D83785B66F167261AE87CB580
+:10C6600000F7C3CC172F2E23FB4A878BD3D0E0A92A
+:10C670009638FEA3D2FC0FE338D586BE1D3EFCA63D
+:10C68000F4F17DB62381BFBB84EFEB0CB3FE353CE8
+:10C6900054897E0E193D5F0EC0FC0E6D8CA57BF893
+:10C6A0000BE26F99836FB22C34F812F1003D0CEE5F
+:10C6B000ED04B76D6E6632C26D14705B1204DEBDA0
+:10C6C000B95F07F760BCCC7D92F67E3AE59F0F38E4
+:10C6D000E9BEBBD9F0F9BB33510F971A3C68776EAE
+:10C6E00003FB02DF77FB3F02DFDBF18C258EBED33D
+:10C6F000BB6F6E71EFCBBDC940EFBCF8AA5E203AAC
+:10C70000ED6AB07970DF3E97A9F4EEEA7C710FE62E
+:10C710000F95FFFD723FCCEFA5D1FE83388F3BE232
+:10C720000D19EF121CFE627A476BE295C5CF6AE7DE
+:10C73000F033847DB050E07126F352DCEE4DCC6FC7
+:10C74000C471DF3E6BF2A25DFAB68847BE8505E88C
+:10C75000FBAD2C48E96D2C44F5BF872FCA42FEADD6
+:10C76000E8D1E9CD005FDD630579B81EC3F0FE06B0
+:10C77000D219F8E50E17E7973F2621DE3B13AE8866
+:10C780007FEB248EBF0746FB7FC3D7ABEAF2204C7A
+:10C790008E4969E847195C3FD5099CFF1447DED7ED
+:10C7A000AD9FBEF3DA7D7FAF2DB902DFFBE23F37ED
+:10C7B00078EFA278718CCB77011DFA547ECF11C42B
+:10C7C000863D0074AAA994296E6FED67E27E363A21
+:10C7D00031A0DE2FC7CAF43E99762E395DF4373D7D
+:10C7E0008DDF57ACAD9CD9160B7899F2657F79082F
+:10C7F000D29A34FDFDC5A9AE2E7AD27C5AAEFEFB8C
+:10C800008DAC830E886B4BF471E6D323FC9F87704D
+:10C810006CE0AB8BA345BC64112B0ABF6FF01DD13C
+:10C82000F67CEDE7A673307EC918FF57488FE5DF29
+:10C83000FEC31CDAD729ECCD7130BF867F97C99E25
+:10C84000FCA80566528071D516E60583FF24D8152D
+:10C85000983FD5E2A6F434D801987EDA5248E567CD
+:10C860005B3C949F35C6671903FDCE6BFF4C417D41
+:10C87000B4568BC716706871856B45FCC40AFBF211
+:10C88000E318BFB08202DE192CF68E2908FE9D3D0A
+:10C89000DD473185EF32EE43566C94C8AFB3F08874
+:10C8A0007F0D9279F11BFDD3514C8CFFCD8944DC77
+:10C8B000A7D7A31D0BACBF22CE9B340658C0DBFB11
+:10C8C000E1D178A8FFC7960904DF272D5E82EF4FDC
+:10C8D0002D3594D68FF1A5533DF619BDF3F4ED67D0
+:10C8E0003E54F0F7B34DF64AE4BFBFCECB8241C011
+:10C8F000EB662397EF9B41BEE3FAAC2C9DB1FD1E86
+:10C9000086F2D75F80F3BC296EFEE478F83E7DC2E4
+:10C910005C05EBDDF225E8A0AC213EBC1C5F9F79F5
+:10C920004522FC9C79C549F8D0F0542FE875E660A3
+:10C93000F177F0DDB3578EC9147F7AFEA281E03B18
+:10C940007F3C8AE25323DB2F3F909384F6D89F806D
+:10C950007E78F0B1FC4031F9E3FFF4ECBFA8E1715F
+:10C96000BF7F8AEBBEF03ECAA9FFCBE514D89B2758
+:10C97000B7A21C4B4BA1F77B06E3D5585334EAB161
+:10C980000693585F206730FFA728BE0FAEF8796A7C
+:10C9900015AE171C0FE3BDCCE2F760407F1FFC1003
+:10C9A000FA3BB8D54DEFFD7CBAEFB16C1C7F6FF749
+:10C9B000C2F7B742FF6782FCF7609C61DD675F44A6
+:10C9C00079BADB467ECBB512C085FA744F0AE50B07
+:10C9D0002525AA999C19411E8722A90ABE7FB6EC7B
+:10C9E000B92D29C85F784F1DE3EA5FDA184D72EA66
+:10C9F00025A3E78366EC6F3BEFEFC987EEFDA80741
+:10CA0000D307EBCBEE45393786C7312EF8C9D22292
+:10CA10006C0FFA9A7EDFF3D3CF4B21F48394761E0A
+:10CA20005A8D714C63B67D68488174EC6EA915D33C
+:10CA3000E2F469C7D07F70D71895DA8F7B264BC692
+:10CA4000D8F4A294E0FBD7F3B8119D7E2FE9FCAC9B
+:10CA50000AB7999A9E2F92BA4F77E1BE38E37819B8
+:10CA6000BFDFC5DFAF3ED03BF39DDB18CE032C0804
+:10CA7000847BAE89E22E5830D085743EE32FF4D00B
+:10CA8000BB2ABEC016E4AF33FE44BA5F78D010882C
+:10CA9000C1DFE314F880FFBEA1E777BF1583F1146F
+:10CAA000B1FB8D0C7F2F76FDD88129141F92AED259
+:10CAB0007E3C7DC70D35889F86FD07BAA89F651609
+:10CAC0000FFA63971CF89CEEBDB0A93C0EF5CC7E26
+:10CAD0009E7FA0DA4BEF9D2FE9FA33CFF7F928EFCD
+:10CAE000930359747F623EB7771E13FA8CF58F66F5
+:10CAF000E1EF2169F47A008AB17C73562019DFBD19
+:10CB0000D2F420E8AF8770FDA1DB91DA3B66F27BBF
+:10CB1000F257A8BF4C421F69FD3D66E2EFF4A21830
+:10CB2000C1DF8BB3CDC4F5EE1E9037C82F9ADE85DA
+:10CB30007177E0BA3589FB32A9A064C7C27C521F65
+:10CB40003373F97D85E347DE67D5EC90D9F1AD7499
+:10CB50006FF5D354FFCF701CEDFE2A533CF4AEE0CA
+:10CB6000EF53BD4F8F49E0EF75E01C402FFE02F3FD
+:10CB70000D32D85139617694E5CAF4E2DF52BD072F
+:10CB8000709C2BAD1F2987270AF857D80D8487156D
+:10CB90008F9AC91F3651DC439D78FE7834CA9315AD
+:10CBA0007F2E23B9D2CAD8B0F879B985C779FF1BCF
+:10CBB000FA1120BDF68B7E99F623470CCB8E827E30
+:10CBC0002510C87F38D01A5B4E792F92FBBA2F0CF4
+:10CBD000C3EE17B514E8F52EC9E92FF5FE87EBBFB4
+:10CBE00074D0EFCD64B6B82B9AF7D0FB3EFAF96B50
+:10CBF000EF6CC1FCFA51BFAFF8CC40FCBBE2B332E2
+:10CC0000929BBD57385FABCB7B12E18C9C0FC0FF72
+:10CC100029D22712FE417E1FB832F8BF2F31FA7D8C
+:10CC200043A0AEC8BFDD2BDE31E85D5A42EF691C80
+:10CC3000C4F748506ECEE0F78E7AC5FDE4DE0407F7
+:10CC4000BDF7F19291E703B78AF6E27DC8DE5B5348
+:10CC5000F87B1DE6A65F9762FFAD3C3EAED718A4F9
+:10CC6000DF53FBFF00D94A3097008000000000002E
+:10CC70001F8B080000000000000BE57D7B7CD4C505
+:10CC8000D5F7FCF696DD64936C42C88590B0B91078
+:10CC90008206DCDCB806582041B468038802C6B8B6
+:10CCA0002101426E844BFBC4969AC500A2C51A1E90
+:10CCB00011D1A22E14282ADA50115183CF0A4269C9
+:10CCC000BDA5D5FAD86A692278E59210B40FF6E1CD
+:10CCD0006DDFF99E99C9EE6F49D4F67DFAC7F379F5
+:10CCE000E347C7F9CDFD9C33E79C3967CE6CFB8FDA
+:10CCF00006B9BC4EC68CD6B939A7F3197BCF67F0FD
+:10CD00009AA3196BD1FCB71A0B18F35EB0B0DD69AA
+:10CD10008C6D89F1272FE7F92DCBAEA2FAEF3136D2
+:10CD2000B32D07DFDD49B13C3DF837E3EDA5769E35
+:10CD3000CFE5799EBEA4B1F9543EDB9D14C3F30B3D
+:10CD4000C3A346B36B787E876FF7D6387CCFA67EB9
+:10CD500086185923D54B13FDFCD12CDAFD81F1BF88
+:10CD600024C61E3533AF2D96B1F1AE45C35D858C1B
+:10CD7000796E8C30B16814BA93343E9F47AA86B35B
+:10CD80007B359E6D7D88B178C6E65B19FDA9F150B3
+:10CD9000D13A86B179E2335BB078B7CDC3E733AF30
+:10CDA000DAD6A58DE6EBA8BE2BD2C9C79BE731FA30
+:10CDB000C3A278859B4ADC9DD9A2EEDFD331AE9B1E
+:10CDC000C66555837886A7267F25E3E3BEDC6365C9
+:10CDD000F772B8FC1D7F5302298718638319FBD4AF
+:10CDE00026C6AF6F9BFAC069D51FFFB7DA62DFA80E
+:10CDF00045A33CD5C7F8F8FB87780AD0FFF243D7A4
+:10CE00003D70DA1AA857B5B8248B1902E3868E1341
+:10CE10003A5E0BF0C6C71B063CF2262DBCC000FCD8
+:10CE2000B5D97CC01F33F5FC6129CFB7CCBFCA751B
+:10CE30002FCFCE9C63756B1C0FBD07C27C611ABEE1
+:10CE400087BBB1AE96C3913E03CFDFAE09F8B7689A
+:10CE50008CBE7BF79B7DBBF9B73A8BEF893DBC5D00
+:10CE6000DDCB235D7C6476D0C2FF83F21723447947
+:10CE7000943B6D7D01CA1308BF2F999DD154FE6B61
+:10CE800023A3F2707F560C877753A2678E8BCF7BDC
+:10CE90004818C7BF1DFD8AEF2725FD9DE4DD02BFB1
+:10CEA000DEC648EA97C9BCE787837CF7D27ADC49BB
+:10CEB0008B915F7535ADC78379F079B1068DD67BDF
+:10CEC000D2E1BB278B979F6C1F4CF38893F470B211
+:10CED000F42F6F8CE5F54E1E32BAD0E7074D46BFF2
+:10CEE000250AE5021FDA1C6BD636DEEED48B91AE36
+:10CEF000305E5E767FEDEBF85E7657FD2C4A6BD6A2
+:10CF0000DCC878FDCEBBDE4FF5E45C898FB23ADE3B
+:10CF10002A088F77BADCF5C0EF232E4F23D6BB3C0F
+:10CF2000A77309E37475DED2F1183332F6EE50CFF1
+:10CF30002A7CEF7EE1933DF8CEF194553A8A2FC3D7
+:10CF4000C4E904F4DB399AE87AB9A4DFF45CCF1DB4
+:10CF5000E88FC3B19C65301691D361C13CD89AC1AA
+:10CF6000DF8A4E3E6FDF7D50E3E3D486B737506AE9
+:10CF7000F48D463F67347F94964170F460FF9D7551
+:10CF8000F8A3800F8F81E7397E6AF7EAD7853F13D0
+:10CF90009F572DFE87B7AB6D33BA6DD83FCC67C1B5
+:10CFA000FC6B9925503F4DEC43D001EF6727ED57BF
+:10CFB000FB07E53FE478A8796264DEBD1C3FB5312C
+:10CFC000877E3291EAF1766ABF18AFCCABF55C3957
+:10CFD0001FB1BEB3721F9CE55FCCA09F7D6182FE36
+:10CFE00099A08FF34F2449FA11747BFE89113ECC2E
+:10CFF000275EEE9BF39AD7108E763F62AEDD7C5EA5
+:10D00000CCD53666F628CCBE6DCC9C48C6B64ABE9A
+:10D01000563BA86D0CF895E25FCCDA367A362F676E
+:10D02000D96DA3E78C0AF03F56DA9645DF7D6D593E
+:10D03000687FD0C0AA014F359F9AA79277103CAC69
+:10D0400062BFD63C7535C1478DD3023E027E0C7E51
+:10D050001175E5BA5F766962FF478E49005F1B086C
+:10D06000FFD9898372C04ACE2FB0DCEEE6FD8ED8A0
+:10D0700066D1F5A3EA8DF4E9BFFF0AFD737A1B16AA
+:10D0800082CF21C69E57C2F87CD9CF389CD895E371
+:10D09000BD29DB3DF9641FFE8C029F8C3915DD38FC
+:10D0A000094E024F7FB0283CAD4EE6FCBA1630491F
+:10D0B0000FC0EB60AE271972E53CF29037313CCFE0
+:10D0C000D306097F9557700FA5BFBBFEB024B99357
+:10D0D000B7FF6F9781E6150AD7B51C7E286F31B36D
+:10D0E000DB4B79FBCF9B4F649C3607D6F371B3DBE8
+:10D0F000CD454D5F7EC9B65C2BF6DDD2EDB9D64588
+:10D1000041706FD99B7FC2C9F17A76AF0923B116FE
+:10D1100093EF2713E2F0DDD8E665546E75F3FA67F6
+:10D12000ED47DE44BD25DB63F28CCE40FBA5DB4A38
+:10D13000DC5541F0BF7AAF1E1FA3DAF4F96B0EE99C
+:10D14000F3E65C46F4F08FB6CBF5EBF3F927F4F990
+:10D150004FDE597D33B6C1F3E3C4BEF9D417E9B34A
+:10D1600072B856BF3FE304E4E8A7079F8F02BE6A88
+:10D17000FF54753C99611D7A3AE578D44C7CBDDE4C
+:10D180003D1AD1CB325FE8FE957CE38A7DBD96F0F7
+:10D19000859D154C37A1F83DC3DA6E7673FAAA6BFC
+:10D1A0007A3B037A4CF52C4EC890DF6D9B2DCC7EDC
+:10D1B000E57803F10F66773B19A7BF8A71A26C422D
+:10D1C000D374768AF7C736FD7606F66BC58F35D2EF
+:10D1D000372A9E1DF12AE8A66BFF82EB29BD79262E
+:10D1E000C1A192B92DE0874BDB357F24CF3BC639F7
+:10D1F0000F75F2768B7D9A0BF35EB42E2CC0CFF8B0
+:10D20000BF559B42E6B125A89CCF7FE9A157BED26E
+:10D2100078FFD5DBF5ED967178417ED4ECFA7B583A
+:10D22000F077AE0811BC26B4EF3062DD8BE5FC95DB
+:10D23000FC63DEC90CEB9B209AB0D3F80F971B96CA
+:10D24000619EE2DCC2801C9CB045B4E78CAF02EB6F
+:10D25000AEB75B9C5877BD95F923F87C4E445ADCF9
+:10D260000EFEFDE2B648D21F968431AF358F52666E
+:10D27000CB433B5734DA7DFC9691F4A47ACE7BA85D
+:10D280009FC7355F0BFA316A22FF33915FC6FCB44A
+:10D290001ED08D3B789D3E7D9EB50E22BDA4CEE472
+:10D2A0007F0570A9619D046FC6F1E95670E470AB0B
+:10D2B000E3EB7C2F16FA97BEFD72D646F5971FFA60
+:10D2C0007B58F077AE67322BAFBF3D9CA7347F1FF2
+:10D2D000C1D168616E039FA7F1CE709F97F490D281
+:10D2E00070D0A959EACB5BEE716761DEEB357796BA
+:10D2F000037C6CB3CD053EB6708790435B62B8FE8D
+:10D300001A477A33B55F087D0A7ACA02C1EFB6C4FC
+:10D31000B4F9C1F7B73C9826F4A9BF19092E3DF717
+:10D32000D97C3B35E8D342EFD9B27904B507BF24A5
+:10D330007DEABE48D17EB680EB96C10E9F97E7FF8F
+:10D3400088292641CF766759A91DD7D3D202724AC0
+:10D35000E9D33F1BE6B90BF856EB55FA37ABFE762F
+:10D36000FAE66E293F7B36F379F2FE4F6BA5C70DC7
+:10D3700041FAF003B982FF8F99E6DE23EBB950AF93
+:10D38000CA30FBDE297CBE555B0DCE96B400DC991D
+:10D39000DB9D05389FDE6CCB039D8D99C6E83C7103
+:10D3A0003257F0F38802E6F6F174BBEC777BAE41BE
+:10D3B00097268673FAE3FD9C2EF19B81DFC882528B
+:10D3C0000BE42197E1C4CF43D7B13757C8CD2A4BDF
+:10D3D000E96F26F5339F3E3A28167ACBE915DA4EE7
+:10D3E000312F81E731FF6E73B5D0BAC5FC14DC393B
+:10D3F000DD1492BC977C2BA68F4E7C4FD8386A37B1
+:10D400002B7D1AF8D7747442F0DC72DF28C2E34235
+:10D410008967769F4DD209637F45798993CABFE9B1
+:10D42000BCA5D6C9E980CA39BEFDC077E8794BE111
+:10D430009B997C85A59103E37BD1B898311A077538
+:10D44000B28979C3385C20F3082EF7987C77F1F91C
+:10D450000C3509F8A798047D71EEEC0DCFA3FA6E98
+:10D460000BCF573CB094B979FD8A64E6D2447D165F
+:10D470008DFABC1B234F2133D0AE225AF45B91C0EE
+:10D480007C7749BD1FFC2A13693AF5EB36C48AF64E
+:10D490005179D4DE6B10EDDD269E0ECB10FBA56717
+:10D4A0007D18ED9F8ABB53B24007B3A6E9E9203F40
+:10D4B0004FD08D4A1FCF734A39E34AC4FE5EB46E23
+:10D4C00024C98D165B69FD73C0D7D311A40F566CA8
+:10D4D000B8ED8642CCEF9941D070D8E737EE1F0304
+:10D4E0007A5BB46EC1F77E8FF3C85E1B7D6FCFF39E
+:10D4F0009CCF85BEAD39CB9FE31F16CD3B6A49E477
+:10D50000ED3D6DB3CFBDC8D31BBDFBDF845E70E3C3
+:10D510004D46AA7F236BFBCB1FC117D689716EF0D6
+:10D520005E3025F2FE6E28D218CABB6C8ED4157CF4
+:10D53000FE15127F7F95FBA0C5C6E6FFD28E79A5AA
+:10D5400064A5F3EF374053ED470F1C9727F5C4A9A7
+:10D55000DA76E83DC3A68BFDA5EAA31FF43B19F0DC
+:10D56000E0F5CC122E2ACFE14AF5AB36867565443C
+:10D570002135FB47F07471C1345B1EAF372B9DCD55
+:10D58000C0B9A9E70E23DB49F3EDA9A07D1F99E5FA
+:10D59000C4BEF730E627BEE71B4974DF35B5A7EBFD
+:10D5A0006E9EEFDA31C2D5427C5D9CDF173B18C915
+:10D5B000F7AEA982AF29FE72D2D11949F42ACFF36E
+:10D5C0009592343E6A9ABE752CAF5F69B774411E5E
+:10D5D0002C7E706E9493CFB3720B3FCF7339C636E7
+:10D5E000E9CFF3FCBC9D9137F8CA7379E8F91B3495
+:10D5F000033AAADAA4111D0E6B715992888F690E35
+:10D60000ACAFCAEECF84FCAB72D95C283FDBEC7EBA
+:10D61000E034D70FCF37CFA4945DE670E7F3BC0AB0
+:10D62000C8E3FB7E6CBEC7053855B456D0793222AC
+:10D63000C743FC69B9A4BB591CCC1AF88DA933099E
+:10D64000FBB02B577E8F7564D9899E6D0C70E832C4
+:10D650003BB230AFAEF53603E4E6ACBB045DF37D20
+:10D660006635F1F6F7985838F6FBDFD09EAFB36C0D
+:10D67000ADA97407CF0FB53253642CE82A97E8FAA6
+:10D68000E7051E33E0F0E98FD838E805959B36D3DF
+:10D690007C145D305347F120E879BBD3F270BE565D
+:10D6A00074F4F38269D7E605D3C34D1AD1014F5FF5
+:10D6B000C9207A98338BE8619A3F73259F5789B1C7
+:10D6C0008EB961674864AE303EFF5ED643FA442FA0
+:10D6D000D72720CF143F517C83D381DB1A1FC0EFA3
+:10D6E0009E663E15CE93F7365B297DB2D9C14C1CA0
+:10D6F000BEFB9A1329FF4CB393D2B6E66CFAFECB6D
+:10D700006617E50F348FA3FCC16637E50F35CFA44C
+:10D71000F4C5E652FAAEF812870BF121C557143F53
+:10D7200052F4A4F852281D953BB137A83DF13DC5F0
+:10D73000EFB00E435E801F29FCA66BA5DEC434F05B
+:10D74000B1CE05E01725C6B34F3FCFE1DB5B6D7768
+:10D7500085390117C1F77AED5692F3A9167608E7D5
+:10D76000FF9615EEAEBB83E4EAADD51A3305D1EDD5
+:10D770006D8D36660AA2DBDB9B6274F9B2A6B78FA9
+:10D7800025F0FEFF9EE2F1022F27EFFCF8D1FFE427
+:10D79000DF1FBFF3F3E1C0379FC7EE8730EE9AF08B
+:10D7A000BE79C422BFCE4C726658B838270D0B170D
+:10D7B000E724FC013F8B98D8A78FDFF957DAE75DA4
+:10D7C0004D614E23F40FE08BC3F70389AF454D61E4
+:10D7D00004C78AF5A79E7E1EFB7D8D85F8DDA275A8
+:10D7E000727F6EE4700DD2DB3E4C62A49F696EC600
+:10D7F0009A38FC3EFC91C5CF653FFB50B3FA34DE4E
+:10D8000050E387A632FEDDB3F157EF41DFD69A4EE3
+:10D81000907EECB1DAFD46CCCF6B3E1BDC9FD6741C
+:10D820009CEAB1CEA1311F47D0566480634481DBAE
+:10D83000023E01DA06FE16651F61D8DFAC55730C97
+:10D84000E7EBAA92DFAB366AA47728F83F9167A48A
+:10D850007D753AD744789D863D3B981818C929456F
+:10D86000B79C6FB87DD81FADB9962541FC7891FC67
+:10D870005E996DA0547D3FCDB725FA9986CDC5FB45
+:10D88000BD373BDDB298F89DD3027EA0EA2FCACE09
+:10D89000DB905E807EA6C6B1A07DF95C9E49CECBB2
+:10D8A00021E49895CB31DEAE6E0079A0F4934FF170
+:10D8B000BFE369FE74FEAA79E6A9675E845DE2FDB6
+:10D8C00030C253CD35D2BE91E31B3397F41AB75D06
+:10D8D000E3EB6C90F82F7EEA4F519DBC7CF901611F
+:10D8E0003FE56917D28635D5642F6B70F17D827D57
+:10D8F00070C8FC6167105DBEFACCFB519D74BEF030
+:10D90000261B1291FA93194F1B0E9C9AC1D01FEB44
+:10D91000D9E0B05FD96EB97699CE996A1D2587BFD7
+:10D920008CA7F1B54BF154FFF0FAF8FEEC20CB993F
+:10D93000E9C3BEFD4B7606B7CEAEB69C6DBA60E4C9
+:10D94000F35DBE66E627A0F3D0FA9FE445C6817E6C
+:10D95000D8583696EC18266600BE575A051C7A7DB4
+:10D96000C3A3D9D7D85F966FE38DB8AAD56B72469B
+:10D97000BBF87CBB613FEFA77E4EBE90EBE7F83E65
+:10D9800062FC2CD5BDCF48E785EE7D9144FF0DFBB1
+:10D990001E383E91E71B76691896D5B30E8253C3A5
+:10D9A0000123B306CB33D877060D3CCFDAA7221B71
+:10D9B000414FCBDA34F76E3E9F5EAB337A70D07C4A
+:10D9C0006CF9829E6AC3DAC6105CE5FCFF2EF999F9
+:10D9D000AAB7ACFD010BF0C5EB9D27FDE517118C37
+:10D9E000EC66ACE74DCCF3CCF67C17EC7BCBDAF6EF
+:10D9F0003790FCDF17E118CED7F1B9B4F3AB7E0650
+:10DA0000E78BFD34385FE81D67A43DF7CC3346E271
+:10DA1000439827F6E1E7D07383E6992CE7999C2F8A
+:10DA2000F49B23D88F8581FACBDABAA23279FD4FE5
+:10DA30000EBD4DE97039CE327BC768C8CD4F0E445C
+:10DA4000CCF451FAD3192FF1F1CEB54D8DD382F626
+:10DA5000555EBE99FA3DB7DD3813F062BE4152CF34
+:10DA60006FA3F59CD997ACD1F916F0E67AFE99032D
+:10DA7000CF461968DF7A453B89478355D869C36229
+:10DA80009C52CFB4B642DF58C8B5BB68CEEFEA0FA0
+:10DA90005C20F91BFA5DD5A7FD9684F3770FD93585
+:10DAA000F89F01F45BEF10382F31E624601F945F7C
+:10DAB000E3BCE556F0B1D7CC020F439D0FE15C55B6
+:10DAC000FED620B25BAC343B1390FFE2757E10E4CF
+:10DAD000F32ECF97FB3BB1B31076CEAE3421D7EB0C
+:10DAE00036F2830A5FCF108E772F5F729DCFC83CCE
+:10DAF000F9013FD1FCFC745ADF23D506B785FC2C15
+:10DB0000FE2CD83D4F5A9897FC46BFB4097F40BAC7
+:10DB1000B0EB3F22FD4575B1FEAC41B07F493CD62C
+:10DB2000CDE1E541F8ACDBE9CF82FE72D622EC7C98
+:10DB3000287720CD13F55A24DDA01FF4DB95E638B5
+:10DB40004F7AE673910CFABEE1F9486157F8B96D66
+:10DB5000675890DCAC9674C575262FD6EFDD2DE6A0
+:10DB60008779417F5E6669CD827EA9C65D16D54AFA
+:10DB7000E39D95E32D0B6F15FE098BB047A23E8DFB
+:10DB80006F66E447E979228CF4D4CF933A0E62FCB5
+:10DB9000CF9F18C920C7BBD27C4B0E5139D7DF3875
+:10DBA0003E6A9E0CF363BE9F3D11E963BCFE67664F
+:10DBB000A10F7D16194FFAD089C8ADE5E497D915A4
+:10DBC000A6C1AEF299C62C8928DF2DFC1835CD4DA3
+:10DBD000E47FA8E1DB9DE5513A93C5A27C24D95BA3
+:10DBE0003EFB35DFA71A7DDF88EF1ED65AFE03EC19
+:10DBF000BBBD116477FBFCC9FF1ED99FDFA26697EE
+:10DC0000DEBEA4E84095DF23F9D23D128EF7E53B56
+:10DC100008FFF5116D5BD3699D62BF723CD0B98B73
+:10DC2000EF8F78D8BB4FB6BD10AFD901677FD64F05
+:10DC300001F7BDE27CF3F93E33F95D6A9E8F749380
+:10DC40001DE7EEB106C88B1AA3D0836B0C1C7C3C7D
+:10DC5000D5EEDC9B053DBBE5095B1EE0C1E14DE770
+:10DC6000C89EDD46398E18F7B33D29C2AEEF97F94D
+:10DC700083A3C8AE3F2B96DD3E87F49CEDA301D76E
+:10DC80008BBB220CA00B3E8E5BE3F0A9F9C10F0504
+:10DC90003CA397905ECEF71FF1CB3AC92FEBEF9ED6
+:10DCA000183D11FBE92D23835E70D1E44A003F0C3F
+:10DCB00085D70792AFD41E7CD402BF5D1DDF371E0F
+:10DCC000BE6F6AA57FACF6498DF4BADA0D131F2238
+:10DCD0003EF8A6990DE7F338DBF64054303E8E4B04
+:10DCE0007E1668EFA2FAB5BCBE68FF5A14CD678FE6
+:10DCF000D985F984E2F15BB77FD2F8ADDAF7D14785
+:10DD00001B97EBA3AF5CF745D6F1FDF7C14FF6D9F2
+:10DD1000C87EC5F19E0ABDE38CB96D09D67DE66962
+:10DD20001BF199333162BF7FC2F9A17704E6F19DFF
+:10DD3000FBC9BEF1BBB90CF260A94FDFAF1AF735D2
+:10DD4000C97FEB07B9A26127ABE778407F1C2FDFC3
+:10DD5000A5F66F99A97DE83A9E44BBC2A0FDF9746F
+:10DD600004D1CB9921021F679E194172A52B46D081
+:10DD7000399F6F2ACE2B676244CAA08C703AA89153
+:10DD8000E7D13353DBE8FC7D46DB4F699759B4ABF1
+:10DD900069927E634E7789A01BD024FC61D64D1D0D
+:10DDA000D02760AF1E9347A93F2CF64ABB33E81338
+:10DDB0007228A340C82F86F1E2A5FF83F494360BA6
+:10DDC000F8B247EA7175FBAEF4C301BF75FB34F2DC
+:10DDD0002319543F7CD671CA5ECEE9B1D6ABB96D7A
+:10DDE00098CFBA15CBC88FD4B8F956D0BB5A47AD27
+:10DDF00089CDC479A84B33D27CBA6C7CDF000EC1CC
+:10DE0000E305E95D91817198239EF44C52AE630A5B
+:10DE100084BC42BE95F757B74EDB44E3A4A973A573
+:10DE2000589F8213078B05F6327EDE17E503AC5F41
+:10DE3000CD3374FD6A3EC30B849DA22BCD797F1137
+:10DE4000F0FD86D18573FAC5CBF9D1B15FA397E117
+:10DE5000E4D66737E6F3CF034DF1F97F29F95B2D5F
+:10DE6000ECD27C9E59DBF5FE90EC5DFAFC55FBF4A0
+:10DE7000F99C03FAFCE8767DDEF5AA3E3F448EABC2
+:10DE8000E08473AF738438F722C5B9D71926CEBDA5
+:10DE9000C8E3DC8B14E75E7CC7B917799C7B91C71C
+:10DEA000B917799C7B91E2DC8BEF9505827FD7498E
+:10DEB000BB23F000BF0C7BC1A6FCECB45FBA17C457
+:10DEC00013FF547ED2EE653994EFB3EBCCB6925D7E
+:10DED000876C375C2F993BD473434121FCA71D1BF2
+:10DEE0009280375327D97397BF28ECB97579363BA1
+:10DEF000EC0C9DEB3FD900F5296BA8670EEA779BE8
+:10DF00007BF6101D98FCC4373AD73ADF9A22F047C7
+:10DF1000F60E668FA5F34905E45DECC0780CF5AB11
+:10DF2000B04D7A3F4AA85F25D49F124A07CA8FF2A4
+:10DF3000B8B92709FCFED413D64D98FF2969276389
+:10DF4000F3ADA47F29BDBAC4682738ADBC4FDB0947
+:10DF500039B5AA2096DAF79EE0FA763FF256A595F3
+:10DF600097F2855EADF29B3403F9693C6E9243AB48
+:10DF7000E49C52B59EAEBB4123910692E317ED0699
+:10DF80003A175C7CC7487AC4886D06DD7A46FAC2C7
+:10DF900075F475F5DED8107FE0105DFD6B0EA5877A
+:10DFA000F803AFD2FBA96E5AFB0ACED77337E5EB65
+:10DFB000EA55954E0C81A39CB7D44B5BD66C4B05B0
+:10DFC000FF5915D94BF35FF59C8DEE5D5471F9E265
+:10DFD000E6EBAE4686F3C76AABFB46C0AFBACD1CD4
+:10DFE00003BB56A5943FAC492F8FAB4DCCEB880DAE
+:10DFF000D05DB583B96378FB73B9AD7B0C1C6FE75B
+:10E000000CDBB71639E15FDA91EAE074B55A6B8B35
+:10E010001FCFFB3B15E3D951C0F773AAD9FF933249
+:10E02000F0CBFD196C2DAF776AD3B351A4774B3A7F
+:10E030004B353BC281EF1DAD463A17C03E057B9084
+:10E04000A2871DAD83C233ED817506F07F99D6C7D7
+:10E05000F142F7467AED4786AE821ED726D65B3D63
+:10E0600055F3929E2CD7B352CA15B64EF4B35AE666
+:10E070004FCBF3825ADFD991AF8C76C2AFD97C28CF
+:10E08000D5083E6ED8B72709FA4582A71DFBA77AA7
+:10E09000C7F0FF2CE2E3D6FCDEC8E047FE68CBF415
+:10E0A000A8F1D03F9F36BB66F1FCDDAD3FB3E05C2D
+:10E0B0005063F25970EEAC7E628705FEFF6BF7EE9F
+:10E0C000A0EF4BF656D0797B296BA473E4A76621A9
+:10E0D000A7153CAAA769DB1D7CDE998582BF568700
+:10E0E0008BFB2025C6A2637158EF5E2D17EBBDA9EF
+:10E0F00074BFA5827F7F57F2E1D0FDD1FBFADC929D
+:10E10000C1B02BB5093FE840FB619E7F24ED87B984
+:10E1100097D228BDE9D2D574AEFA3D2B1D457C229D
+:10E1200027E43CFBBA51D8CDDAC53EA8B6F8E3E601
+:10E13000629FBC6CA67D526F82ED1BE764C626F021
+:10E14000B4B4C8A8A3D7E5C5113A7A9ECF62757E4C
+:10E15000E59BD9105DFEA65919BAFAB7DC747508AB
+:10E16000FDE705CA898F4CD0DD5FA95FE3756A645E
+:10E17000479BA6FFCED3354467D7EBDAD7B33981B7
+:10E180007A3807EFFA2DC199B10E0BCE5BD5067127
+:10E190005F67BEA74B7EEFA4EF7C21BA7D382CC30E
+:10E1A000F59F422E9AC93EAFECD3F3F1FF19FDC99A
+:10E1B000458E68396EB451D8173C7ABDA383CE9F83
+:10E1C0004CE0A15EDA7BEAB385BDA7DEDB6169B412
+:10E1D00013FC4DC91C240DAD1AD9F3787D6B72ACBC
+:10E1E000C8AFC1F703E6809D8589FE2EA1FC84B1EE
+:10E1F00002FB25B4BC81AF1B7A4603EC3564679AF9
+:10E20000F909D999D438B27F45A74BB7E9ED470D45
+:10E21000B0EB04E17359A193E8B566EFFEE3433830
+:10E220007CE696C6E4621FD5B5CD3657E45C496FEF
+:10E230008ACF5FAC3690DFBBF7F5A3446FBDD52620
+:10E24000A2EB6F824B835BD83543E970095F9795EA
+:10E250008FBFE480E6F269A21EE03304F419029F46
+:10E26000E47EE0A6E0D507BF90F2A5F89F02DC2788
+:10E27000D07CFEB4FEE012024F354E08BCD8383DCB
+:10E280003C96789C6F81FF2C396164BE6FB1FEA50E
+:10E290005827E6C1D78979CCB924EC26CA9F70F3F8
+:10E2A0002513E5FBE8A694C32B0FFB4EBF4FFBE8FD
+:10E2B000A854EC9B7997E2A9DDBF8A9EBE898ED4D3
+:10E2C000FC15DF0EECA3BB486E2C2F8C8CFB98B397
+:10E2D0000AFEFF85C417247F1D582FF50A3EEAD198
+:10E2E000CB9961778EA37B47BDF674D22BFAE4906D
+:10E2F000435FBE32323D01E51E69B753FCD823EBC4
+:10E30000A9712A78B97310E87A683CECB11BD6651C
+:10E31000A47606E92B9EF5E678D80B53D70EA2B467
+:10E32000C2E688871CA9586B2C857CFCF09E84F87B
+:10E3300071B0CFAF37C7CDE25D7F7847412A1B85EB
+:10E340007C09A5A73687CD0FB673AB745BA1D0430C
+:10E35000EBEF7C8FE4DA39C3EB51F3B1EFD63F1723
+:10E3600085AB37B5EBDF1EE3E02AC9DD319E870AB6
+:10E37000C98FBA638F037073EC180D3BF5CF6143FF
+:10E380001B1CD01F6AD69724C02E56F7B7A38F4107
+:10E39000EE7BD69AE3A17F7EF60E978B1AC935D213
+:10E3A0001B3EB5313A2F7DBA3BC207FFFDA71A735A
+:10E3B000C3BFB3CCF8CA68874ECEB6DF8C79EC4DBC
+:10E3C000F0FCBCB010E3FBF624627C9797EE677A12
+:10E3D000D60E8FEECF8EA2D2E5DB845EB747D97121
+:10E3E000A5BD17FA3CF2D0E7D908A1CF230F7D1EB7
+:10E3F00029F4797C3F26EDF8C35A7A72711EF54EE6
+:10E4000063D98D2477EDD9D0D75769E12ED2333532
+:10E410005702EC63EC9D18216F43F0ABD2493D5C91
+:10E42000E70AA2FB2997AC2CF89ED95416A3CB4F30
+:10E43000B726E9EA9738D274E5D7268ED4955FE7F8
+:10E44000CCD5E5BF933D5E57FF06D7545DFEBBE3D9
+:10E45000AED3D59FED9EADCBCF9DB940577F5E69C2
+:10E4600085AEFC96F9CB74E50B3C2B74F95BABEFF6
+:10E47000D0D5BFAD71ADAEDCCD1C26C8BD769CB38A
+:10E4800038DC5FC6398BA7ABDE186E0FC66BD17454
+:10E4900043637F76FAF3521F9A38D6FD19E823C5F5
+:10E4A00020E890A76EA81097A55C49667E4D9C73E6
+:10E4B0003B924037A1F542CB8B228E5C74721C2EAE
+:10E4C00039187BAB89F391A2B147F23378FE9931C9
+:10E4D0000B447EE29167D379FEE0C1ADB79A38FF75
+:10E4E00028BAE6C845948F1E5B2EF27319A91C4703
+:10E4F000C6FC6DA197AFA3684AFA2697B093F47B48
+:10E500004F53A58003EE37020E48FD9C3E911EE15D
+:10E51000F489F4554E9F5566C68E73FA447A829FED
+:10E5200037F1FD37FCBC89F4757EDE44FA263F6F77
+:10E5300022EDE0E74DA4BF6B9E4FE93BCD1E6AF78D
+:10E540006E7335A5EF3537D2F73F363751FA41B301
+:10E5500097BE278E5176053FD95F949FA901FE3D56
+:10E56000D8E70E99CF06FB61959F50F9055B1A59C4
+:10E570006704F669A729E6636BC0DF37309F35B1C2
+:10E580008F83F4B0CD89EE8C3134FE5007F97BE4F3
+:10E59000F769DADC14B8FE6E1DED193986E37B5E8F
+:10E5A0005EE5FA68CE3FA65C6E34835E7E2FEFA9EF
+:10E5B00086F67F59D249DC58F768B49B6C15F7F0A2
+:10E5C000265BC53DBBC9A6CE16F0A3962F9913F7BF
+:10E5D000685E89B4107F6AB9C7E4839D52FB82519B
+:10E5E0007E521CA37CCB971D742F6FB2C39548F24B
+:10E5F00046E6FBFCE7F80BBA2FA3FCD9EA9E4CF1E8
+:10E60000179DD3A1074CB25B9C6121FE77F8AD5FEB
+:10E61000897C57CD87613CE527DFF525F31B46074D
+:10E62000FCE193AD1D69B0134C5A6D7505DFFF51C8
+:10E630007E6FED8B0E23E489BAE7A3C651F38D34C8
+:10E64000F1FEF202F778263BDA7271AFA1A5DE4E39
+:10E65000FD25F0EF963CAAE73652BBB65CD8812781
+:10E66000D5D95DB06F2B7F7B825C37AF47EB2CFE3B
+:10E67000C243F70D26C9FB06E8C72ACABDE86752A0
+:10E680009C3FC984F5375A5CB0873EAAF1F6790100
+:10E69000FF3FEA4704ED5FCC13FD66FE85CF177A96
+:10E6A000BBDB4DF09DABCE6F4E9997F29959A79178
+:10E6B000FDCA28F3BF1DED590EBC978639FE1441E3
+:10E6C000FB3C2305768ED9526FFF1A7A59FD3F43E2
+:10E6D0002F6E81EFA18CEC69A174A3F0A2F03C1025
+:10E6E0001D29BC07DDD7223CF7DDBF92FD84D2D7C0
+:10E6F0004074A5E869B255E01D78C53D1A4547DA72
+:10E70000176D3B681D755692738A8E42E9E04A3A4E
+:10E710001274D9F23D2BF577251D05F00F78FCF327
+:10E7200074D46184DCFD47E9E7F61E36239A17DDD1
+:10E730007B8DE732E446C525E771E42BD9D4192057
+:10E740002955FE00CA075F591E4A5FAAFE8B03F4D3
+:10E75000E7F9A2C71C1D449793A40CFCC300F55F06
+:10E7600093F7E25FB3A9FB1E6E7B2EA783E9920F9E
+:10E77000AF2A11F43533CD48FE8CE9394B49BF67D8
+:10E7800076A11F3BF93F646F93FEF5EB65BB1997CC
+:10E790004BD7619C19717AFDFB7AA977CF0CF1B741
+:10E7A0005F9F732DE9E1D787E8D9EF8D917A741ACD
+:10E7B0004B13E7EB4DA4FF16CBFD982CF19DE134F4
+:10E7C000B2220EF712E6314108BC7ADEE2467FD76C
+:10E7D000322FE5AF633E4ABFC3FCA407DCC0050689
+:10E7E000F2DF658CEE8F1E8DB8B16C39EF6F7AFE5B
+:10E7F000F44C7CAFB3F6A45A0CB81DE8F90CF2A1A6
+:10E80000C1E8F933F4CC73299E11381F1F29769281
+:10E810001E76C49A417A21F69339C85EF96B2E4769
+:10E8200033B99C3BCAE52CD2635CCE667279F72B78
+:10E830002E6791BF3E7B2D43BB194EFDFD1ED5FEBD
+:10E840003B8EE9CC34686039F69DD12F0C851DEBE9
+:10E85000B59811C5C0DB6B31638BB1DED762120C8A
+:10E86000220DB3503AEAF9CCFEF45645AF81F16679
+:10E87000D078A1F055F00C85A382EF3F01CF416322
+:10E880000BAF84E765E8F7B09F5ADF8E4A4C879F4D
+:10E8900051C6D345083E58FFFCA804ACA3CE2AE0DD
+:10E8A00032A96922A5939BC633533EF999BC80EFE8
+:10E8B0006758020CCE217636669A46F9EF49DACAD5
+:10E8C0004EF00CC73CCEE6F9B3B846C63ED9DE12D0
+:10E8D00085FB99E79E31BA70AEA9333A37B9602704
+:10E8E0007FCD28E2822E1F4D857F93EDEAFFBE7417
+:10E8F0009D55C1CF4B70FDD9356EDA6F0CDED9F85E
+:10E90000805E33344CDC3326F742DEC07ACE98701A
+:10E91000C167868609FEA8F0C5DB09B9CBFB19C320
+:10E92000F95AF2FDE174AE2918E62EC27AF879811F
+:10E93000E28A7AB323C85EF11B199738D97F35C5AF
+:10E94000E5CDC4B99D7F378647EDC4BEFF8D8C4BA6
+:10E95000FCC520CFB5687F6D5A5E22E0318509BFC6
+:10E96000CA7556B3CBCFE774DD58B90F47B3D13270
+:10E97000AE4777FE507692DE3823C9A1C92CEB2131
+:10E98000D8098A4F98C94ED077DF2D51F8457B4F73
+:10E990005C3482AF94446A6C505A203E272CD1C01C
+:10E9A0009C417ABBCD19CE9C41FB23223B56978FCD
+:10E9B000740DD1D58F1E97AE2B8F715FA52B1F3491
+:10E9C000334F971F5C3A41573F61FE345D3EC97338
+:10E9D000BDAE7E72F51C5D5EF1BD64F189A5342E7D
+:10E9E000D4B51FD6B448573FCD5BA32B5778605E94
+:10E9F0007747763CF8A2F8CBD8B85257EFA7512208
+:10EA0000DE64A67DC92CECF7E1AD3FD0CFCBF8BAE0
+:10EA100046F1A34EC16FBDFC1FD05149A29EFF4ECF
+:10EA200077E8ED1AC98D265D7EC33F8A67CF553AD8
+:10EA30003C87C283E3DDE5477D2EBFBD3C5FF2EB43
+:10EA40004A13F40BF82F82E70FFF45F07AE1BF0875
+:10EA5000CEC37F115C1FFE8BE072F82F82CBF34F89
+:10EA6000E8F15CD8A1C7F3D8F7F47856F437103E34
+:10EA7000C677EAE920141F133F0DA10B8987F9FC23
+:10EA80009FFEF04047114EFFD31B19D9E7BE092F57
+:10EA90002F84E065D2484F3BF6EBFC4117532DC065
+:10EAA000538F6704CE939F493B49E83D4E2F57074C
+:10EAB000280EE107468ABF396968D5C097FD299EAF
+:10EAC000636379FDDB731A897E1259E9FE257C3E6A
+:10EAD000E5FF11467E9CF261225E97E574529C83AD
+:10EAE000E277E5C9E21ED11B63E5F9CD25EE13758A
+:10EAF0008C15FA6CA4CB41F78E2B72441C073F7621
+:10EB0000A5968F02FDBC6E1B017AD822FC269D883B
+:10EB1000178E0BC40B43DF847E9722F5AB963F58CC
+:10EB2000AD58C7886D4C272747FAACBA7BAF57EF73
+:10EB300075E8F2A3DA1275F5AF39E4D495E7FAB3C4
+:10EB400075E5F9275CBA7C61C7385DFDB1EFB97531
+:10EB5000F9F19D3375F5277E5AAACB27B39E87011D
+:10EB6000DF619A38EF5B395FA27B604E110F547EF4
+:10EB7000778C8803957600A54FABFBD01E4977A113
+:10EB80007AFA308BD0535B9298388759E5798BE9C4
+:10EB9000F5758FBCCFACF454E6D5DF6756F798FB1C
+:10EBA000F47AA9B72BFD38E81EB33BF81E73B98C75
+:10EBB000DF0E957F71E3847D2F74FEC32C62BD2D23
+:10EBC0007758286E44CD2B743ECBF304DDEEB6F6B9
+:10EBD0001FBF933E4EA3FE8B724B878CE3F51E3313
+:10EBE000BB7C6447B9623C57A717E7CA1F595C77DB
+:10EBF00039BF79BCF26BC47ACA0C86DB67E7D07D7B
+:10EC0000B1F9BF0C1A3F6F9CA0EFF8095ABFEB2B6C
+:10EC10008F16F7B958B4C509FA1D783C01CF440BDB
+:10EC20005B477146F2DEFF6D9BDAEE1BC18BCA2C8F
+:10EC3000AD66325E309F19F4306B1AD7A772611738
+:10EC40007CF1113BD7371E6B32919D67FCB8616533
+:10EC50005C13EB8BE318C6CF1BA00FE82C38A73C46
+:10EC600039DE48E32C1C27D65762BCDC77FF9EFCBC
+:10EC7000178C49FECDE83E4C3FF44674A8D6F1AF60
+:10EC8000BA8FAFE836144EEA7CC9A4DCC994F352BB
+:10EC9000F053FB41C14FC5433857984B77DA29AE43
+:10ECA0006226EE9129FCBD3C5EF0A34D8047A1A8F1
+:10ECB000077E3450BD12634E34ECE1BDCC19EDF843
+:10ECC0001A7BEFBF304E81E03F507CD540FCE10A1B
+:10ECD000BE3040BCD540F4497FFF40DC55107F106A
+:10ECE000F77A243E7C9906F2A3DF1DA9DFC72F8C9B
+:10ECF00013F0F5C87DCCE5AB3D57CF2718ECF72DC9
+:10ED0000EB8D924F08B90A7D03DF17AF3793BEC171
+:10ED100058E956C4117DB4C54CF75B27BB9D335CE5
+:10ED2000C23F4F7A07F9BDF8D42ABC7A79CAE5FB0D
+:10ED30004EE8C153986B03FC19951BF5E54BED3379
+:10ED40003E833C5F1C722E5D2ACFAB4B43CEA54F5A
+:10ED50008D93F2D8C55CA427493F7FB5ACD3474714
+:10ED6000BE8C686977A1FDC953BA17A6E0E284BFDB
+:10ED7000263F90E7F00BCF869C5E67EAF7BE5E1FEA
+:10ED8000FC06B88F7016F7119CD8EFBD146FD57BB9
+:10ED9000C026FC94CA1F24EB9FF55EA472D4476F73
+:10EDA000E7723B46430FE9F31F85F8A17AED86A889
+:10EDB00071E86F9F99FA53F72D6AFEEA1BED08F28E
+:10EDC000277B3A8DBAFB2D57CC7FED7374FFE2EEB3
+:10EDD00018CF3BE0E3674C2E2BF0778FFD483CE2E9
+:10EDE000E46749BB4DE87CFBF4CE224DF861BD22BF
+:10EDF0006EB677A646F700381F64D837EADEC06CD7
+:10EE0000E68F43AAFC319E8DE309CECA1F53E11F52
+:10EE10004FF39CD7B2D41CCEAB743EBCA624DC19F5
+:10EE2000F0D374A6887B3F03F96BE65ECAA5FE6E3D
+:10EE3000BA3491FAB9382E4DE85DEBEE5B013ABA7F
+:10EE40006A2F33639D9D21F7DE555A29F98D77BCD2
+:10EE5000E2D3F23ED15A8DE87CA5C6D4FD22E2D39E
+:10EE60002A7FB155E64B447ED57A91EF348B776695
+:10EE7000F6487B03D68914EBC1B9789FB447601D6F
+:10EE800048B10E7C075F421E7C0979F025E4C197EA
+:10EE900090822FE1FB22569A9A6B147EA5E2A07D08
+:10EEA00003BF527190DE03BF52701E7EA5E0FAF0E0
+:10EEB0002B0597C3AF145C0EBF52701E7EA5E0FAFF
+:10EEC000F02B05E7D9B8EB0279F031F76C5D7E2EB7
+:10EED000D7BF8B83F62DFC4AC1FDC3AFA4EBCFB3E4
+:10EEE00042D7FE56D6A46B0FBF5270FDDB9B349DFC
+:10EEF000DFE976F91E40E5B641441F2F8D2E758D52
+:10EF0000E7FBF5CF117FFB9E19E70063FB32D0EDE5
+:10EF1000CAFA7097C073EB4C8177031378EE5940AF
+:10EF2000785E6311F91271FFB83FFF4DB159F86F68
+:10EF300090C27F8314FE1BA4F0DF140F17FE1BA4E6
+:10EF4000F0DFE03BFC3748E1BF410AFF0D52F86FAC
+:10EF500090C27F8314FE1BB483FF0629FC37F80E92
+:10EF6000FF0D52F86FF0FD24FC4841EF66404FCF93
+:10EF7000D49DEB381DEACE750E5D1E7A7A707DE861
+:10EF8000E9C1E5D0D383CBA1A707E7A1A707D7871E
+:10EF90009E1E9C5F3DCE49FC12FA7A703BE8EBC1A5
+:10EFA000F951ADDE63B01DDDB0FDFCAB483B23B5D0
+:10EFB000C734CE0A56BC70A00C7EB64E9B961AC3C0
+:10EFC00039A5597BB1AC98E73DF21EDF68D66300E6
+:10EFD000BEC9CFCEF1E6F133BA773CEAAB242A576B
+:10EFE0007E5DFAE378CF3DC048EF3F26E33D557B99
+:10EFF00017731891AAFA817CFFF542C757F5885F0D
+:10F0000006CD831F0C7371CF24778D3D0FF7E5F785
+:10F01000183471DFF42E71DF3794AE764BBEB4C76F
+:10F02000B0FF4838EE0F55682EC4316499D8097383
+:10F030001EE0D49807FDE0BEF131725D8D1370FFC4
+:10F0400048CD5BD901399FA0F8B5A21E66A9E2E3BD
+:10F050004CFA82591683BF5B845E8076382F5EED52
+:10F06000D5DC3B83E8FBA1F142BE79BC2B2654F1F1
+:10F07000EF57EF6B9C80B8B859E1A2DDCF1F8F220C
+:10F0800038DEB84EDB89F8C3A27DCC8D78579F9CC3
+:10F09000F7D5FB1C962A1AD741F174AADF8AEDA98D
+:10F0A00014FF57C13A8B115FC10A3406FFA8821BB7
+:10F0B0005FDFAB585F16DF2A66D23F455C4EB88CE7
+:10F0C000CB51F1386131A555905B2A2E6752414CE6
+:10F0D00009EEC5B176E64218F00D0515EB07F3FE13
+:10F0E0003D3EB70BF78A267DD1788CF2BB4A294F7B
+:10F0F000643086C621B936C2ABD1FB1A377A77188D
+:10F10000E29C88D75D6B8E47FD7DCC0575878B1A99
+:10F110008A3B55F3CB611D069B06BCB3A38382E8F3
+:10F120008873809B80F75C9799DEDF986D7298C139
+:10F130003742E5F895F71643F48490FB252D6BDEF6
+:10F140004B35A6E37E89C1E507DF7A2E82F405A55B
+:10F15000EF54C8FB6617D71D1B7C0B2FAFD82FF4BD
+:10F1600003CF368DF89FBA6F529FE14B35405F1841
+:10F17000B26374AC51C87FF0C533DE676FC616AD9D
+:10F18000587F8CE2222AD617468BB828E187A892AE
+:10F1900070AA92F78A588E231E7AE6879CEFB847AA
+:10F1A000D0BDC4688A2B6C15FA9CB2B7287D50BDBF
+:10F1B0001F53F146FE71E0BDE251F92ECBC60A8A1B
+:10F1C000BF0ABDE7532BF5BD65EBCC747F6859884A
+:10F1D0003E582BEF0BD586E883E7C687E883F2FC21
+:10F1E000A2EEF356BC71741EE92B8D66F2CB95AD81
+:10F1F00015FA0BDBCF7C8867285B3BDD807743CA41
+:10F200009E73BBB47EE8E42DA9C7CCEAB4115CE7D9
+:10F210005C4AA6F4E64B4994DE7249DCA344EC0B4D
+:10F22000E8A0F305467AF4DB526F99877B9588470F
+:10F23000F486C9FB938CF4A65CE62801FFB8CAAD3E
+:10F240001D85DA37CBEC598F7B9BB376308A3FBA7A
+:10F2500001FA0DE2BFA0EFC0EE5E90564271183386
+:10F26000358A67B9A16085A46F4EEF0CF4EE95F472
+:10F270005B4AF93EB920E9DCE3ED3201EE3778353F
+:10F280000BDEE1F3C873ACA2E3507A2F8F90F62720
+:10F29000BBB02FF5D99F30593C6AE38DBE0DF75BAB
+:10F2A000CB61B31BC204E239CC237344F98817A3A2
+:10F2B0006F5B8743CDFFA35DA2CC6010F14E5CDF96
+:10F2C000025FBD6D75AE6551107FF962E2B419132E
+:10F2D0000B03785F1412A7B7F29EE1095F172F5A4C
+:10F2E000C9E18C7D521EDDF93D4EA1ECDA09CC5D01
+:10F2F000CCCFAC0B18538FF7F8712F70A1CCAF7E29
+:10F3000071DC9F36DA093E949F3E21F5362FF15588
+:10F31000C1B76E05DF32825F79A64E207ED53903F4
+:10F32000F888C8E991EF1048B9146287583DC1299F
+:10F33000D61B628FA8CC11FC9C999CA9B7525CB0DB
+:10F3400093EC796AFE1F9AF5719A7D7E9109529E1F
+:10F3500034FF6BE21BFE2BC3731BD6B7D520E2E64E
+:10F3600087185B99B40BD1FE57FC83C9772402F848
+:10F37000E77A1AF9D1354730FE3D1B3511A73E809B
+:10F38000FD8665F73CBC1BF6BB660B439CEBE35963
+:10F39000828E1EFF8185F4F0324BC731BC93A5E00D
+:10F3A000F87ED3BF9BC92ECFFCC3F1FED7C2469BCC
+:10F3B0000BFCF98B89A5AB30EF881C17E16306DFE6
+:10F3C00066E8FF644AE9F7095F9B5E790C71FBCB45
+:10F3D000DBD3288EB4E250EE06BC27F2C544CF0F33
+:10F3E00027C08F6B775820C71BD6C5905C2B4F90DA
+:10F3F000719DAC87FC540AFE0F4C10F6ABEB8A04EF
+:10F400001D77CBF30818E66C5D3D798F3B649F2830
+:10F41000BB60A87D21F41D8781F68FB223C06E608A
+:10F4200009B22B2ABB8439FBC30590A365167DFC6A
+:10F43000A14A5F557637791E5CDC27C77266244087
+:10F440006FDEAC3920C7AAECCE5BC6F37CD509339E
+:10F450006E60B259B14EF17EC73DE2FD8E457CBF74
+:10F4600082DF94C9FB5855DBC6D37EABF2F1347F03
+:10F47000E07D79EBE6A3292F807EFC6E8ACBAF720C
+:10F48000B82DB141FBBEB255D3C5F5ABFC8109C265
+:10F490000E57C6D574C0EFB6D56916BCA153C6D5F4
+:10F4A0000BDCEF7B7582531757CDEBD1BD8659E945
+:10F4B000ECB8783F89CF3B4D8C9717D4FFA256FD0F
+:10F4C000FB04BC3EE9452F4F8824FC5538F8BAD3DD
+:10F4D000903A689E1C0E04A79EFB787F4E1A87F018
+:10F4E00051E9F79971EE2EC37D0A9E5FE8F09931DC
+:10F4F000CEA275E2BD10CF26318E67638C6514F401
+:10F500002693C39202F8E1B01C47F3233E58C5E1AD
+:10F5100082782B1577190A9F0A39DFAAD618BD3EC3
+:10F52000D6BAD90C7C2C18E0BD821E49B78BD64DBB
+:10F53000A578F32A939BE2193C12BE1FADB0DD0BF8
+:10F54000BFC0822D0F99D370CE9E20ECCF3D72DFCD
+:10F55000CD4AF70FA7778156D85C98E702472BADC5
+:10F56000AF0FBE0F727868787FA694E0CBE9C28BAC
+:10F57000FB79555BF4F80CCC47C0B76A4B05EDB787
+:10F5800025268FC5113C8F6DAF0CC73D94057C7F40
+:10F59000E3BD23E6F0507CD3C70FDE924AEBE4F3E1
+:10F5A000A47B502EE70CBCF3C3E984E858D18B8AC6
+:10F5B000CB56E359278AB84CEBC46FDA976ED26BFF
+:10F5C0005A387E61EF1E685F5A10D8C5C7B5548996
+:10F5D000F7D742F7A9DA9F6A5FAA7DAAF6EF63E63A
+:10F5E000527FA216E0335CDE36FEB21F38CD90F3B8
+:10F5F0005D28F1CAE1FA6A701CD73513055ECBD2DB
+:10F60000F5FB1DFDA1DF948962BF974DF30F47DC29
+:10F61000A5AAAFC62D8B15ED40F7A0B7948986BE7D
+:10F62000FA2BA9BE3E1EA5B28F5FEC5B1F0F7EB109
+:10F630005F23BD77E57D4753FE0DFAECD3429F3D36
+:10F6400053B7BB21097AA3C9971AFC2E56955FF0D0
+:10F6500087C55CFF01BF5822E5747B9E276762D097
+:10F66000FEAD7AE0E92C8FE02F7EF0970F9E7EE9C9
+:10F67000F7139C01F9A9E6BF68E36FCD15F6607832
+:10F6800089F5DD9BDD4B717695768B13F7972BD73C
+:10F690005510BF6589FC5CA105F01D4A0715EB34C8
+:10F6A0007A5FACB2698CCFF83FC8972B37CDA637BD
+:10F6B00091149ED47B274A9EAAF97F57CE7FA1A49E
+:10F6C000E33913C5FE5B589D665942FB3ECD520996
+:10F6D000FA97E50BAAF4DFFBF0D4E75FCED980FD03
+:10F6E00081B8213A9F6C320B3BDFBE48D257CFAC7A
+:10F6F0007CFECD9B79BDCFB7EE48857EA2E6B154A6
+:10F70000DAF3164BBBDC12A9B7723C5504E369E986
+:10F71000E3024F95CFBCF127BCCB55962EF9D97D8E
+:10F72000229E7F51DB7EC2DB828D9BCD69BCDE8A4F
+:10F730008969BA7B32958DFCA0CBE1B970E30E33B9
+:10F74000F8C08A89026EA1F45E26EFFB2AB842EE69
+:10F7500068417E0B551FFC6F3F1F67F50A5B14EC79
+:10F76000D36A9C47245D5736C6C462BCCAC68A9F0A
+:10F77000E0DCA1F87DE8BE3B6513FB6111EF0FFBF8
+:10F78000F2D45417C535C3AFD59F5CDD2CF1F653C9
+:10F79000B378BF3139A2ED09C0217979B80BFC21CA
+:10F7A00033B393FCC6A067CCDB6210EF3D66D67521
+:10F7B0005EC03CB84A4DF75390E29D29A8D8F13C71
+:10F7C000BFD320E2AFD28D227D5EC28797FB51CEA0
+:10F7D000E23AE9DDB9BE779342E8D5C2766DC47BE3
+:10F7E000379638E66A7106E853F5A3E853D1EF403F
+:10F7F000EBFB85E423DFB4BE5369D21E91ED4A458D
+:10F800009C4AF9FD235CB0CF7CD33A2DF2FDC1BEFA
+:10F81000F572621D17DBCF7A33C5B965E0F56E2945
+:10F8200089EF67BDA1EB54FB44DD69EFF32FB40A08
+:10F83000FFC2298DCB2FDEEED40A1BDDFF52EB5227
+:10F84000F6EF6F1B87F0F6C458694FE88C841E5999
+:10F85000162EF7BF5FE4F17D76D07725F7D57B6D67
+:10F860008A3F9F6E94729175DE87FDCC9A32E87D57
+:10F870009293ADA722F15ECAA9A9627EAADD6AB3FE
+:10F88000883366911627DE3FE4E7AB934DF0FBAC7F
+:10F890004BA073E46D4D19C4176EF3C608FB83D4F7
+:10F8A000EF97483E18B1BA6203DEF95EBC2DCDA1D8
+:10F8B000F17116DB5D1F6FA3F657BBA00F466C9965
+:10F8C0006D4927BD579C03949F68B5C64A296E0CA5
+:10F8D0007C12FBCBF04A26E4CED26DE21C30CBC0CA
+:10F8E00036C24F38ACA5744612F8C4C31AC599B3D2
+:10F8F000EDFA77ACC6E6979EA7F35FC83B70ABCD39
+:10F900006DEE04F071AE6FC0DEB4D85E4A7A7BBD96
+:10F91000E49327B774D17BF40AAE57C4FF58441C54
+:10F92000704FA481EC70DF360EA84AFA9514DD28DA
+:10F93000BFD423F8CF78C0C94872ADC45846EF2968
+:10F940006DD8329DD2AACD255BBDA3107F5C1A3F36
+:10F9500081E66D263B5955FD7411AFBB332C06E78C
+:10F960009B54B33735582FADDA7137C5FF7CBAC316
+:10F9700046F13FC58ED9C53171F4DE31C5D7A97ABC
+:10F98000A94582EFD4D44FD7C5EF2CE67DE29DCDBB
+:10F990002FDB22E87E988ACBA94BF024150D16F1B7
+:10F9A00039E39D222E2789EA3BFBB58BABF4E36656
+:10F9B00011E711146F74E302DEBEAEFED928F453D2
+:10F9C000FBE0DB631C06B2430D47FF7DF146DB44E1
+:10F9D000BC51963C2FCD8A2DBD7901E0FF6B23C130
+:10F9E0007FA0F1AA0F693A3FDE6DBE68D25B3D7E13
+:10F9F00066811FD9E360A4177F6A644DD00394FE2B
+:10FA0000A2BE8F9770F934BA3515F4B16CCF43A903
+:10FA1000902F9F458A7CD99E5B7E037EE5D9152673
+:10FA2000F47313237DB8D22BF46B561DABDE23B5D4
+:10FA300095733A9A5E1421DE3DDAA68F3757EFDCD4
+:10FA40007E6612EFF320DE08F4FEBEC9BF18F87D13
+:10FA50009FEBAF38C7A61609FA7CBFD53883EE0DE9
+:10FA6000F18D023DE4FDD66723110FADF4B512E32D
+:10FA7000076EBCFFB3F23911178CF7E9E9AD506995
+:10FA80000769907690952F986724C791FE455FEAA5
+:10FA90004C7E4B7FF8AB91FA555FFEC07E3AB7D5EE
+:10FAA000ED13FA435D5B17E90F4A1F517187B5FBF0
+:10FAB000BA489F50ED1A0E08B8D41F10DF2BB20DB4
+:10FAC000CA8EE2D632719ED628EF7D31BF7CAD2939
+:10FAD000389F57BE16CC7E82B28FF4903E786FF678
+:10FAE000EFE81C5EBF4EF6CBF3E6A0F1AA414485D9
+:10FAF000E27B861DED9DBAF35DFD81186AEFAF0FC5
+:10FB0000DF0839EF6EB09B90B6D4DB49EE6F6F34EF
+:10FB100064E39EBA5B0B77418F6B97F7B706D7BE4E
+:10FB20006B83FD2089F51CC57BBBFE14CF0F8B7842
+:10FB3000BF0978DDC5188827EA3EFC493EFA9F3C9C
+:10FB4000ACF322DED4306B53CAE1A7682992EBC82C
+:10FB5000E9CC075D0F3E22F8F3A366B691DE6D3661
+:10FB60009532D8EFFDD2BFE8FDCA40EFCFB66BFEAD
+:10FB70009F05EB5787247D9686093FE3CED19E4DA6
+:10FB800098C77735F3A85CBA77681C8EFEBBA51FB3
+:10FB900052E9A9D3247F4E91E72BCB90443BE85800
+:10FBA000DDB7D3DC6E8AF7BC2BE74825E4F38F7B07
+:10FBB000AC142F30AD279CF4D6942133499EA977FD
+:10FBC000DB35A78995F1FA47720C7EC4C5FD9859BB
+:10FBD000C5BD006B887E6BB0D1FD64ADFD575F8104
+:10FBE000AF271B2F1C8DC67DD97FD3E8FDD1F2DE58
+:10FBF0008F1F7D8BE13CECCBA578E814CF1EACE7E2
+:10FC000064EFCC2E0F47DD8F1D6D569790172C7823
+:10FC10001DED777C15156B08CCAFBBE7637AD7B1C8
+:10FC2000BBC74A76DB69EDF29DC390F974273AE9C8
+:10FC30009E34AF47FA66B7DD40EFBB4D6B3F4AEFEE
+:10FC4000154E53EF195AF5EF1932674A0CECCA6496
+:10FC50004BE5CA417C8BC0DFE468FD79F1B522A198
+:10FC60002FBE56A4F5FBDEBD8A5B5172E565FB9E97
+:10FC7000DB845D4AECD3E5CACF7F299DF489DEF6AB
+:10FC80008CAF7DC7E26DE8155C5FB8708DFBEDA2AF
+:10FC9000C2805C9D27E1A4E4B38A5B9827E135CF5D
+:10FCA0006E10F009F9DD154537A17411C0BB88F756
+:10FCB00052F8643FE83886782C8EC751F733C2DF9C
+:10FCC00049C2DF57AFAFC7B30B438CEE2E4FDABF3D
+:10FCD000047FF47EF7B7C65F4728FEFCB611D02339
+:10FCE0001E34901EA1EE3B7AE47BEDEADE23CB6668
+:10FCF000C40FCA8DE1642FF4C877DA391F38063E85
+:10FD0000A0F6FFB0999DA320474FF2233AE6D769AA
+:10FD100068A3EFA993D269BF0E651D49F27E4E21FB
+:10FD2000F43763E07D6AA2FB16CDF7F012DCBF9CCE
+:10FD300067A77BEEDDBE90F7A9E53BE6DD4CF287D9
+:10FD4000F9EA1D73BE9F79BB2D0B4479DF3BE6C3F7
+:10FD5000199DA3B6E4B22CE85FEA777F067CC77CE6
+:10FD6000592CD94D1F79C43712F240BD5F3D25C5CE
+:10FD7000933869F095EF576FD54A17E07760BCA3C9
+:10FD8000C47C3B17843FB34780DB0F7BCFC9A648B9
+:10FD90007AB75BD1A9B2730FF3763D0C38A9B8DA04
+:10FDA0003F4B7A53F05771857121785074E73533A2
+:10FDB0008AC3053E1067D4F7FB316B247F51719DD8
+:10FDC0002FBB9C487F9CEAC99D847DB882C399EC77
+:10FDD000E89DDFC37A1FBD23D28DF99D94BF6B11BF
+:10FDE000BAAF8A261994BF98E206CAA57C2B577130
+:10FDF000024DFA3881D0774EC387964E06DCCE6925
+:10FE00006F8FC1C7D7FF8FB1DFFB27D74E127C2280
+:10FE100033D1336312C9B9693A7DF2F5DC4F52E848
+:10FE200077662E1F1D0AF9774B4AE975E8D79629A0
+:10FE3000FC077F4EEAA4388F3F2FF86B0AD99FD773
+:10FE400088F759BFED3CAF8C6B16F4B06AB1B89728
+:10FE500098CC1A898E1303F1B236CCE37F5B5C73C6
+:10FE600020EE782FFDBEC8CBCD6D19A787F783F79D
+:10FE7000B023CF3AF9C9C67BF8E5728AFB8D3EB252
+:10FE80002A8DE7371E3E5A4E71BEC9472EA671DC39
+:10FE9000DC7BF85591BFFAC845C4056F3A7C4CD459
+:10FEA00087FF6008633F397CBCDCCBF171C768CF4A
+:10FEB000FDC0D7CD971A8F411CFF7EED9CC56914FC
+:10FEC000D73A3B255BC4B5AE03DEE7C52F5A1FAD5D
+:10FED00005E25AF74D12EDBA2F887DD07D41D079D9
+:10FEE00018F8C1E07F3E55F1BD8A0F0FC42FD53EF3
+:10FEF000FC57C527ABFDCCF6B8369A418CDE7F3A6D
+:10FF00006EF8C949B42E7DDC70B7B9E731F22B5DCC
+:10FF1000604EF0895722DF75425EB4148AB846AD50
+:10FF2000A7C389FB18450522DF72A1C3093E8F3C98
+:10FF3000EC5BDD3122DE51C5C5B65CF027619F1454
+:10FF4000217E91D72FEEE929071F2DC27DDE34F4E3
+:10FF50007FFCA81C8FA1BF5D1744DC61B7ADC3E96E
+:10FF600090E3A01F3E6E1AF863D16A2BDD3B6AB99D
+:10FF7000D0B882FA29B3F78DAB858C6BFDFA71A7E7
+:10FF80006B41E366F68AF84E8CEBD48DEBA7B86034
+:10FF9000DE1FC59F76C7B81271EE57F96294F3FC65
+:10FFA00043F2772A8A9C7E23E4808A934AB0C8F77A
+:10FFB000B8E5B985D7A3B8CC5DBD629DE79BFD359B
+:10FFC000D84FC5926F175B84DC64867017EE639719
+:10FFD000182F1F4FC6F9E405713E290E2BDD8EFD4B
+:10FFE000D86012FC86C5A9DF4BEB58F6735EEF773D
+:10FFF000F1C9F4FB6243130FB24C9C8F97CFCC81B5
+:020000023000CC
+:10000000DCE07AF719E0FB77AC5513BFC325DACFF4
+:100010009D1941F750BA0F8F28C4FE9913E67C8EC4
+:10002000F17DDB3BE92BDAA773A29D8538F1F41E45
+:10003000FE6F914F703E07FFAE957D45FAB9F2D73E
+:10004000DE12F0D7FE17C6A99F79CE22F4B31E7A2E
+:10005000A7F9BF2789F7E9B8FE4EFA47CF75F2DD59
+:10006000CD1C6721CA53CD3D51805BF7659378B7AE
+:1000700096F544DD14E49F7DAC5DBC671B4AD787D1
+:10008000270B39B03CD34EEF9D35245AAD94B65F63
+:100090009841BF07632ACDC4F9C06DE9DFEEF88B44
+:1000A000C9425EA56DB004FCEF5C7EB8C399CA7B03
+:1000B000D938C6767C3FBCEFFC051163192ECF639F
+:1000C000DEC4C78B4DBAFA6ED4EF2B67E29936D5F2
+:1000D0003EE765FBE3EB4C723CE07989B83F112ABF
+:1000E0002F1AA6C4F6BD57487237CE46F7AE328DEA
+:1000F000D29EC7EB3AC82E28FCB7C9FF61A338BA15
+:100100005D364187990691EE32C8785F69EF53E713
+:10011000981F4FF14C9A3298FAF1533FC6FDB9D06F
+:100120002B92581B8DAFF433558FEB61366232F250
+:10013000F7DE8A8C867EE1F9CEE4A9A5930B41D740
+:100140005EF651909C381F11D5148CBF06A3DEEECD
+:10015000F9CEE469D44EB5AF6F9ACE3EA278443F53
+:10016000D14F7DA681CEAD0D46F62AFDEE00EB20E7
+:100170007FA66AF72EE7931FD1BB0D6E4ADFE3FC23
+:10018000F223BAEF379FD20F9A3DF4FD647335A581
+:100190009DCD8DF4FDC3E6264A6FBE35B200F4BF97
+:1001A000FCD05AF651907CAC6F337B82EFD7BC3BCE
+:1001B000B57F3AFAFE64E1B77937ADFFF2FB55F946
+:1001C0006481CFEEC542CFE474B9CE113BB0BED04E
+:1001D0001D29EE25BC344D9C5FBB9344BE71B278A3
+:1001E0002FD46D60DBD0FEA56916CABF9B6EA077C9
+:1001F0001DDCB1A2DF77B30CA4A75D3F636A03E007
+:10020000E48EE7DFF302F977AF12E5EE21E2BB9A65
+:10021000AF2A9F34A5CF8E9025CEC7C2FFCEE99DD1
+:10022000FAEFC36FB1985F687D759F3E141EBF954E
+:10023000FB96F605F477EC83B4A07DD1E0A47DA114
+:10024000E850D15FC314B15F33C3249D73D945F027
+:10025000830CC3F938C146FE4137FC177C3DBB64B3
+:10026000BCFB15FB41FA03D47E50FB40D17B32DF4F
+:1002700067C2DF21D631C9D8BF9DFEA1C962DD1D8D
+:10028000F191A41F77B79B1D9037938CC2EFD0DDFF
+:100290003EAF00F7C24BEEB637F6C7BFDE94EDFFB8
+:1002A0006938287E30001CAE58BF45DAEDFFC1F535
+:1002B000137F03DF5E2CEE6586D26BFB64657717D8
+:1002C00074FBCE64F741D04FB76633E19CD26DEB3F
+:1002D000FF1EF94BD3C4BE50F4D33085C97768F8FC
+:1002E0003A33AEE4776A3D7DEB5CCA88EF65CA7845
+:1002F000E350FCAA7505F1BDD7270F0EC09331AEB0
+:10030000AFF07E86D6D9E99CAAE8F7FCE0AF96402C
+:100310007ECD9FEC147E268351BE072BE449DF7708
+:10032000CD487157417286416FE9392CFC717E7E50
+:100330004E823F0B36E8E0B86BCB14B1EEDEF985A8
+:1003400006D809CEFFC5EE85DC3A3FA4E724F49237
+:10035000F3DBC47BE7BCC7591AEE8D20FEC789DFEB
+:100360006D117E10E3C35F9E843EB4E46123E92FE8
+:10037000E7716CE6ED963F287EE74EDD1FAC93ED0E
+:100380005AB65DBC997EDF8CD327F49F8F6C0DE944
+:10039000D08BA73FFCE009BCBFBEE4390DE6667612
+:1003A0001476779EFF78AF51FCCEAA8C3B9921EF53
+:1003B000F7D7EC16F7FBEB106F02FDE5C08EADF83A
+:1003C000FDC9FABD6666E3DF67E09D343ECED2B676
+:1003D000487E90E4FD6ED1C78D5ECBBC1B604FAEF6
+:1003E000DEAEFF5EB34B9FAF0BB9B7A84D91BF67B1
+:1003F0003092E5D2FDC42DC25EACF8F695FAAE9708
+:10040000E0EB5EA9EEEB7E41EF7B1B0F7F99FAA13B
+:100410005DE467CB7C17CF9FFB52C05FC1AD41F25B
+:10042000FC7349ACA08DAFAFE1B0CD013B40C30B35
+:10043000C24E70BE2D9AE0BC3CBC93FC0AEC45A3B6
+:10044000037AD83D878C6457A86FB7FD0CBF4BDB90
+:10045000F09C46EFD5D61F0AF309F85C5882F2A546
+:10046000876C0E27CA5F0C63B03F9FE778C3BDD887
+:10047000F3299D847FE0157609FE370BBF5FA1F05D
+:100480006F7C58F893973C21F1B36D9589F0EAD3CE
+:100490005842DA95785278FE95E1A93E3CA1DDF408
+:1004A000877F7F5CE29D21DEE6E8B64AFA5D0C8537
+:1004B0006FCBE18F52A1F72A3C1B399E7FA8DA3B14
+:1004C000E57B785F83E76AE0D9FE8FE3F98F908F51
+:1004D00085A4F77EFC53E8BD9116F2A32BBB86B230
+:1004E0005B0CAE7DF7581C1F7878E2B3A4E796C783
+:1004F0009EA95FC1C88E76ED14D8D1AE7B033FEBC9
+:10050000CB7E77FD53B9A08F167327FD6E8C3746CF
+:10051000BC2BDF9D367BFBF37CBCE2D8AF52F7638C
+:10052000DFBC1C46EE93B9725FE2CF1AFC2E60BBB3
+:100530008DEC6DF5ED61C2BE7640EF3FEB4E12BF24
+:10054000D35762E9295F01BD9CF78771D479B0B6B2
+:100550005DFEFE8B3CBFD52A3BC3BE90F7A11C6F4E
+:1005600050BDBA2922DE36236192137CA86501F3BF
+:1005700084677C1DBF67C4EFD5EFE50DA8070EC0EB
+:10058000F795FEC7BC7A3B87E23F4BE5EF4BF6EDB4
+:100590000F99AF5EEB8DB21A89EEE8DD86BA47C5DA
+:1005A000EF2B7E02BA8B0AD053838C4F3BF6FDDFD4
+:1005B00098F03B4DDDBBC4FD08CE21B7E29EFED9CD
+:1005C00036110F5753D035C6EFC4EF74083EB46CE4
+:1005D0009FE673A6F54347CCB741BC6B1F424FFB68
+:1005E000BEFEDDC37B037C64D4DF393C77943029C5
+:1005F000B7BCFDC64FF6C9AF90DFF1F8DF16CFDD0F
+:100600009BC3D7F335FEC66B13F5EFB85CE7D4FF99
+:100610004ED377B2F5BFD3D46B97F091FAA0D253F3
+:100620000F4D11723C3455F0BDC1A51F479D8BBFC6
+:100630003B4E3FDE6CB77EBC6F8B977F555CEB37D4
+:10064000C1EFB81CF7841CF73772DC7F164E2A1DE9
+:1006500068BCFF5FD3FF0B8D21EA0800800000001B
+:100660001F8B080000000000000BB55B0B7C94D5CD
+:1006700095BFDF7CF3CC7308210904C224242160D8
+:10068000880324542B94C9D300D6065C2D688401BA
+:1006900052C83B80B5D2D6FE3208222F5BA8D1A229
+:1006A000224E82E1A1613B118289863A286411AD14
+:1006B0001B698BFDFD56DCF828F23213A374E55755
+:1006C0005DF6FCCFFD3E321942B5DDDDE4A737E72C
+:1006D000BEBE73CFFB9C7BA929CE317C394588DC1B
+:1006E0009873E69E08215CAB7A8A12B385E87B4357
+:1006F000154D0E2184DB7BBC3E5688DA8EE16253B9
+:1007000032C1257D6F1A00B78DB36FA2F18DED7FD9
+:10071000781BE3BD07558785C65F6BFF280AFB5C26
+:10072000FC325C88E158F7519420B8FAB2C2F02646
+:100730001A77103CAB5515FE4CDACFE83363FC62F8
+:10074000AA0E7BCD82DA929656730FB5557B5B79F4
+:10075000FC0D9F69F0F8DEC641E376CCA7B6CAE887
+:100760008DB2537BBE5DDFCFCFF3AB53159717FD33
+:100770007BFF10B70CF35ADE895B4AED15FCCCBC4D
+:10078000B6FDF4D00B996E5A57D341FB440CEC5391
+:10079000D361D2608977756A6B510CD14BB4282232
+:1007A0008D9A8B62AB584DF4AC6A6FAE16D45F95E0
+:1007B000718F49105D023EB518DFA71F8388A375AE
+:1007C00076FA8BE877D1F779D452DAF755DFB1DBD7
+:1007D0005DD4063A5F8FC2770307697EE6003ED399
+:1007E0005D44BF1CB4662146D0BA83AF4739687CEC
+:1007F000A3EF75496FA39FCFFD9A0607A8653AB787
+:10080000AB7CEE8A2F55A6BFBEDFAD2E95F799D5EE
+:100810009E1689739DF4C9EFCD7539647FEAE23283
+:10082000E07F2261418E9ACC78BB000726CE69DE3C
+:1008300044A854F968DFCC6BE9B654DBB7CB24E6A7
+:10084000FBC0B7D4035DA3483E4E140F9F4C235703
+:10085000E7DDE332F0BC22B33B7505CD3B19E188FF
+:10086000B4D37E0F158F8B045F5F438BFEE25D6612
+:1008700037B59507E5F74EDABBA3206F270F4E5526
+:100880003DCAC07E776ADF15C2C3ED00DF3CCCA74E
+:10089000726F6304F619E09FEC9FEBB2F3FC13DE7A
+:1008A00077EEBA87CE773223DC09BE749945B98FCB
+:1008B000E5843E82EF752636820EFAF7E6821FB493
+:1008C0002E906160BEF6B69BB479F7348B41F34C41
+:1008D000CCB78BCF0DC6C7EEFDE097F7D0FCEA672B
+:1008E0005461A1EE6AD38A389CFF931D83F12BD704
+:1008F000E85C6DF2C7C505C96B75C7557D8960F9A0
+:10090000EED0F5C3C1FCD4F978324395782558BCB4
+:100910008250AE6E6D66B92675F3D8A6702BECD4F6
+:10092000268677272B74FEC407ACCEB584FF738A66
+:10093000366EA03686608384CDD45AA97DC624FB4A
+:10094000A1B6583F86D8A9106C2A1E976348A17D8E
+:10095000D4D6C9E0EBAB335D8FBA088FCD334B668D
+:10096000CC043EA26F99A06FD65C8AF08868210AF9
+:10097000D5F79EC077FB0F9A04EC478DB5A3F263C1
+:1009800092D37E27290AE1DDBFC3E4F5B0FCB9228A
+:100990009469422CBB49EACD270EF734751CCD5F14
+:1009A00063E0F355B7A85E1BCDEBAD271210C93F2E
+:1009B0006D4DFE01E4B5FAB86AB7D2B9F37DC9BF8F
+:1009C0009A0EB8C5E4B4D0FA5A1F75125CBB57F141
+:1009D0003AE4FE027A597313CBBA3863AB4D11591E
+:1009E000D4AEE93363DE99C38A788CE66D0E8B6AE8
+:1009F00002DE3599B3CF2951D4AA5BD627D27ECB5C
+:100A0000B79B3EECB1CAB557E8BFBACE6D2CB7154F
+:100A1000DEC1FD557B07C335C23800D3FECDF8E3F8
+:100A20006621DA5C91B1676EA0BF2788095754D060
+:100A3000697A3CF4E104F84AF2241A88D82385B88C
+:100A40006F92331E7ABFD1E8980D3A043A4D76D0B2
+:100A5000ABEEF0810AE0EDAD0E731AE8A8B5AB5F1E
+:100A600061BA06BE20BADF486D82E0F30784A46F46
+:100A7000A05DCA799D49F15AB19E68C8FB5915EF2E
+:100A80001A1A0A78FAA3D83E09510CBD58B520C7E6
+:100A9000003B07351684CAAF747D506C46251AADED
+:100AA000D4FFEF197BD4614176E23F5D298C7F81D1
+:100AB00059B87DD47F5FA4331A723FD61A9505BC0E
+:100AC000C65A93BCA0FB5863DF1A7C7FF328C5F19C
+:100AD000106D7D24EBE5C90AE0DA0827E4444958A3
+:100AE0006C043D368F5A6C84BC8FB5FB324A32079A
+:100AF000E0028C431F8497BF5714E136E23BCF8D51
+:100B000054FC06DA3F6023FCA02746BB09F8054CDD
+:100B1000121662CD20FCC82231FCFF8E9F9DF08B07
+:100B200018C08FF81D8DF59F67137DA84D9A2B4433
+:100B300037DB85156C17747A5E24792F205EA52922
+:100B4000526EAA771C29C2788DE85E8F754551F2E6
+:100B50001C45380FE030D9AAB9925FB95A7B7FAEF5
+:100B6000F42FBAFDECC8751973A9DD9E5B62465B74
+:100B7000A866C6F70C61EF5729569693CF49FF60D8
+:100B80008FEF5DA1D8533306E45BD7AB3AD97555E7
+:100B90007FAA7EBFCB2C52F0395777068D970BA9D1
+:100BA000D78B56DBECA9C17A043D237A94DB2B6EFC
+:100BB00013A46FEED571F6D4A9D4AF5E340BC89EE2
+:100BC000A65FB1F47B256508FDF285E865FB60D87A
+:100BD0006F9372EE8F54BC6B09FFD4DCC17A97A47B
+:100BE000E941A35BE1F3357E6564D853AA7841F30C
+:100BF0003BA973758C7638CC2BCFF5C23FDE4960AC
+:100C000029FA1B62594F7990ECD7BF68E7BCD3E84B
+:100C10003F02FB71CCE44BB6D3D0B11AAB13FB2F20
+:100C20001014E8905D2B15DDDC9E0AAF6DF3F3E642
+:100C30009E3190AF77DD1627E2B0C6754D91B0E3D7
+:100C400059629DFD4C06820AB1F7CAD4EBC7332422
+:100C500038E28CCE1738628A53C06F9DAFDB735D6C
+:100C600079B939D75F5FF5A7B6DBBF03FB757FB3F3
+:100C7000395E8A4977C6B401BEE97CAD131EC65BF6
+:100C8000E7D755FE11EEA3410FF5E25CB633CFAACC
+:100C900082E30A8D7F56FA1D8A7F3A7D676A7C5807
+:100CA000DE21ED51285F757AFF9036C4F7C98FEECB
+:100CB000607E080BDBBF50BE7F135F28C22CC5507F
+:100CC0007EAC45809F8906691F1397919C10DEF7C3
+:100CD00008F7E11E6AEF0A7FCBC472A8F1E75EF065
+:100CE00087A6BE2BBCDFCF48FEBFE34F476EC903CC
+:100CF000C17A18AA77D7D3B36A87F3DF75BF47964F
+:100D000086F42B443F43F44FE7977B7514EBD9559A
+:100D10003EAA2D525F357E45D0EF90FA863FE87BA4
+:100D200035ED8AD79FFC2DF44F21C4896F8F85E85C
+:100D30009DCE9FEBD91DDD4E9D16FE63763AFFA931
+:100D4000141907787E62F136034E3794C3EE9D9AEC
+:100D500028DB039A7D0B6D4F539CA3901FDB94718E
+:100D60007204FCF529B3BE8FCDDB4CF89F5ED33DFA
+:100D70006625AD3F9D2BDB53880B83605798580445
+:100D8000BB7E7AA4C5033A9D5626E4C13F9C561EFD
+:100D9000B85DC2F16607E005F17976824F99E47C8F
+:100DA000DDAFE8F6FFF482EF14F03C451C053D1C76
+:100DB0008A28E1EF284A4C31E173FAFEB4296BC569
+:100DC000C0F99B720DBCCEABD96FC283E9DEF7537D
+:100DD000C5DB445D8BE05208FFE4BCDF14A750FF85
+:100DE000FB3F1B3719FC75AD1AFC7DF8EBE41B01CA
+:100DF0006FE37DBEF7659F6971905FBAEA270B3E8E
+:100E000093FD653906E84BB9C64357CC8468F0A713
+:100E1000DF3B2E1A7E47F743FDC70F44B883F876B1
+:100E20008EFC94181F044F783429D88F1DD9BD39F2
+:100E30001DFB949B3D594EEA3FDBF87412E28DF2A4
+:100E4000DD8FA4731CBC7B633AF299F2A6CDE92E28
+:100E500086C3DD9C4F19E5B92FECBF79D7A6A0B8A2
+:100E6000BB2A5F65FC4BAD470AE16F67DFF0E9C362
+:100E7000769A97F633C50EF1BA57743F0CFFB81047
+:100E8000F131F2B7062BDB73DACF05FE374FF8FEF0
+:100E900073D0E313191F99CA68DEE55C23D367A1F9
+:100EA000F06E89A771B141B1378BE0F9631A317FD8
+:100EB000F13AC59C003BB062D864D58175C3188FE8
+:100EC000251B2677A17FE183B27FB6C57BF024F690
+:100ED000F98DD9D9EC607B9352326900FFCBB966AA
+:100EE0005EB7688BC2F1BFFE9DB427E21A83CF794B
+:100EF00059E3BFF8CAA2802F3FD0F872DB83EF1C02
+:100F00004DA07DEDB1EE2BB01B6F3F7E26D54FFD82
+:100F10000531E73221E76966F75315387793C589BC
+:100F200073646725AAF1347FCA8F731F43BBE8C17E
+:100F3000C54F55C0DE6EB772DEA6E3B74A711A60C0
+:100F40008F5F6FFCE112D0EDECE3568EDB57358EF0
+:100F50008F1743E8A9DEEE21FE3B28D1D9576FE574
+:100F6000F6857ABB70903CECAF4F60F8B7F50E6E2B
+:100F7000C57C295FABB4FCF87AFB4DFD325C3828A8
+:100F80009ECDDE60130EB2534971AE517974CEB46A
+:100F900089354D1BB573A5D1FAC99EE47CD0217B60
+:100FA000E3CA2E84BCE63C998FBD797243128CF261
+:100FB000F2073FD85941E373F34AC6E551BF75C7FD
+:100FC000675C5778BDE39185A0777993459E4F3B49
+:100FD000F7D9C7D3E39FA2FD3D6F9838DFAFDBF1B0
+:100FE000C1CE8DD42EDDB2D21C2CEFDFF6BCC91AD7
+:100FF0003EDFA457D7A3C33FAE579B93587F9A4871
+:10100000AF32FF79BDAA7B700DD3EF81BC92D9A01E
+:10101000FB59932709FA7476C20C9673CF6185E960
+:10102000AFDB717D7DB176DE2A836FCBF4E4013BCB
+:101030007E4964337D8F747C928EB8F752FB82BFF9
+:101040007BEE43746E3F9DBB9DE8EB1F7FEDF83454
+:10105000B37B9C93CE37CD20E3DD6BE2D63C835649
+:101060002FE83697444A9A2BA8CB68FE93FC982722
+:101070009AF0A9EE54FC6159F067B79E3322DFA3C2
+:10108000BCF1C3E038827E3E0CF2DBD7C3F79BDABB
+:101090005AEC93366077BFF36783F007F9E99B7BDF
+:1010A000C2843FE8BB57F313EA33139F7A3B46B23F
+:1010B0005D00DF8CA8C7754C68027CCE2CF9D87B0C
+:1010C00088E22659C711EAB481739EEBB890053BBC
+:1010D0001B7ADEDA972FB07C54B73FF299C2E79FB4
+:1010E00075CE98F5CDE73FB2FB4216F877CED433F4
+:1010F0000DF956AFB9270B7CA87D45DAF37F940E26
+:101100007A7FC5063A08E979AD62653929542F72AC
+:10111000DDA0F7B8AC1BD476EC627BDADF29EB37C5
+:101120007586EEA278D43B567CD0057BD69F20F303
+:1011300028DADF05BA4D1FA7F941635FD25CB26BB5
+:101140002F5E950799FF9D85FE8EC73EBE6AD8012A
+:1011500091152E10579C873E53FFC2D5C9EB21E74E
+:1011600067BD23A6C03EBE99F5B75AAEF7BD1A6E4D
+:101170005739EEA1DE20FE5D3D875715AE41F58063
+:1011800070E10A9A576776FC80E3E313AA405C5744
+:101190003751EA937859EA53CDBA23E684A0FD7615
+:1011A000429F186F192FCE7EF56FAC975B66BA3AE7
+:1011B000A197E1B085D82F21DAAB28DA3CE27FADE8
+:1011C000864344A796F717AB3C5ED7AE8A915893F7
+:1011D00010E94DA373148BAD46C4D3B3856F3AEABF
+:1011E00036C2D8F3CB5B687CCEABEAD44D82F3A792
+:1011F00045259C57BA5357213E32281A5D7DD97335
+:1012000083FD599EF453D35585FD58DFC8708E5326
+:1012100066CDAF2905BEFABCAC61721EEDC37196F6
+:10122000F0F665CD857EFAFBB2E6450ECCBBEBD57C
+:10123000F015EC17852FFBAEA0EF84E5CBFAE8E7BD
+:10124000E4472027759764BDA350FDEA09C4E7ABC6
+:101250000E93BC203E3424BF6B801D273A83AF170A
+:1012600088AF2EF81FB770B9A03F934678A13F759D
+:10127000FB1561449DA8C3D2843A52ADA9270EF252
+:10128000BCB1FD4F66C8735DDB3B66C724AC977588
+:10129000275248B6E3759AFFAA691FFF2EEA7C35EC
+:1012A000C7A517AD31BEC3F97BD5C156CED3AB852B
+:1012B0009FF3F4EA96C1F2D29FE0E0BA48A87E8498
+:1012C000E53B06E9C5ACED522FEE52C50AD839A16F
+:1012D000D5696725C4733C32B04EC6BB2EF5C2C378
+:1012E000885F02298A53A1AD02619E75888B3CE913
+:1012F000329E09FCEE85EC656C57BCD977D0B902FB
+:101300005ABC3B6BC336A31A84CFAC4E59970C849E
+:1013100089F243CC6FF768F041B84A22F27358AFB4
+:10132000B26057030659470D3D47BD562F3A817AA3
+:1013300052E600DE731213A51D135E969F2E83FCEA
+:10134000BECB40E35306D62FC997EB07F2215907CE
+:10135000BB9E5DD94DFC2923FEEC253EA37D9EFC62
+:101360007119D99916F2C780FF95FC315A5F7D0635
+:10137000F7BF58EF64F860FD4D0C1FAA7731DC5EB3
+:101380005FCCEDCBF525DC7F02A87E17FF7BBA1181
+:10139000F2D0051D1B35009F8A0981470D9E7F2ACB
+:1013A00046190C8F52787E76FED38D1ED48B66DA6A
+:1013B00035FD764422FE3A6B9375A8B33659876A99
+:1013C0001DE5BE259FC6CB66ADDD2DF350573AE631
+:1013D00015C42CE0FCB59FF257D8A395F9EE3CF06C
+:1013E000E5F8F1FCD46D6C276D5C073D75F70DD108
+:1013F0005C077C83F271FA746EC6D475D904E74633
+:10140000282CBF642F6E2CD1F34ADA27BF53DEA3FA
+:1014100014AAD565D87FD548DB54D8DFCF5DEEDB85
+:1014200080874EEFA251CB53110F75991CEFA28EFE
+:10143000EBF9BD49209FD2EB7DFABC0E57EEDD588B
+:10144000372B63DCBA29B03BA464B0732EB36801B8
+:101450005E2E43B8B296ED96C3083B70B726C779A7
+:101460000E1917FBCD0E630CEA3761B9B11E5AD7BE
+:10147000A5F1F9B8C6E7131A9FDF429D8CDAB7A928
+:101480001F6D37F5A39D01FA4A7965BA3D91575210
+:10149000C6F22BFA9200EB75C1D9D02F696F92205A
+:1014A000D75B34F94DD0EC4D576E49955CE7E37D41
+:1014B000AAB47ADB05ED1E443FAFBE6E60BDE07698
+:1014C000DE8DC263859D7F49E69D6234C52304CFCE
+:1014D0007B299EED906ABD23F363D2F37953651E99
+:1014E000200E58E4BC04470EF464AD566FEDF51AB7
+:1014F0003C26D4A763BAD363E07F35FDD2E143FF36
+:10150000ADB2BDAE994230B5AF28F27C35F3BAD357
+:101510008761BD6233707DBB498E9FD4F4AF264591
+:10152000DB4F3B8FB0FA92C08FC0E197929610BC10
+:1015300029C2BF4CDA7D7F3ADB6BE14F9F07BBA826
+:10154000F8DE174E8A2B0BA62E318E043D7C3B0114
+:101550005717E42C31DE8CF1D6F7EDC1E3237C493B
+:101560008A1D70B61C1FD1BA7398330836BDF83E79
+:10157000C6CD869C250504CFB1788FD7436E7E2BD0
+:10158000E5CBB6BFED0CE856D521E3F6BCFD6D17F3
+:101590005F845F6E8B74C2BCEFCB4F667AAFEDD8C1
+:1015A000B305F2D6DB2AEF0336B5FC69E7CF799EA7
+:1015B00005D724B4AF2F5BD077561EFDE362E0352C
+:1015C00027DCF705E0878ECE643CE70C977AFDC8F0
+:1015D000D1BC25D0D3DEB6FD3F81FECD89A68016D5
+:1015E000F8BC60E33A44E5810905D0D3DEC8EE8556
+:1015F000D8BFF6798B13725A79203E0FF58143F9E3
+:10160000B21E5E31716B12FCACE1E57DBB7F8EFBDF
+:10161000D5E76D7C2F541723E3BC4AB571DA4AE64F
+:10162000DFAEDD4F03EF7D36BE9FAD40AD8AE08A71
+:10163000DD695CC77FE5EB8F16820F85EA8EDDE8FA
+:10164000FFE2399B017438697645CF801E9E347164
+:10165000BE59A1C115A7864B7CC27B8A987FB15B1E
+:1016600093E0672B87FFF476E03D47DDBA13F98EF0
+:10167000D863E1BB8973FB886EB4EE5CB3690AB8CA
+:10168000DCBB2FD20879B9A06C5DF814F66F96F325
+:101690002ED8B6323D3DCDE305BE47F304ECD6056A
+:1016A00065DBA0FE73CD7BB2908F9E7F7E0EE7A59B
+:1016B000BAFCEAFA52F99C65905F644B40F6A85276
+:1016C000FB5BD83D2282FC6D85069E3FF464EF53A0
+:1016D0006260FDF91693DF4C34AAB08875D6980184
+:1016E0007DA84CBCB518E7AB3434A6236EA998DAB4
+:1016F000B3107A71CE26AC0934EF4DCD6F551E5C18
+:101700003317F1EFF5F0B9A2D9A34B09D27F5D6A87
+:10171000B77983EF2543DBF7EA85FDADB401F8DE49
+:1017200015168EE1F5FDDE34FBAA91A7D5C648FB60
+:10173000F13ECD6F213BF6B5E6EF16AD1E3CBF3F47
+:101740003F86BF5F6BEE4987FFD3F70FE46B7EC325
+:10175000D8930E7B15BA6E0EC211D8911714B6230A
+:101760009507950F54A253A5D5E355411761D6CFE0
+:1017700069BCA2C87509D334BAD3DA0D05C9FCDD3A
+:10178000CA169BCB46EBAAC27AA210175547F6445D
+:1017900021DEE97D59154D1ABB62E334FEA4682CA5
+:1017A0000BAA3756F84C2E5BD6107C46FC44F396B9
+:1017B000E36FFAFE3305297C9EF2F670FE9EB0F7C9
+:1017C0004C839C96EF18BC0EE7B207E95F6FFBAE47
+:1017D000B8E0BC3C45C33BA07CC07A12F8FAC324F5
+:1017E000F0BDD220D6E1FEF23CADC1BD26C1C22A79
+:1017F00061BEF7ACFC6B4418E4E5FCA56AD6DB5E81
+:10180000A587EDDADB0573D92EF59A7AD8AEBD7EC1
+:10181000F42EB60FBDC37A16C24EBD5DB05C8E8F7E
+:10182000EC59E8A0F1FD3A3C46B0DF7FEF680DDBF4
+:101830008F39AA7C57217699ECB21EB4E1543DE76A
+:1018400017264770FE7DBA40ABF70CF087F32E5D8C
+:101850006F7A8563FF41E8617904D775288E6A79CC
+:1018600011F1DE823827DE6B94639D940373F07D63
+:10187000636CCCE565E0CF1DA3DD450539B8DFEC31
+:10188000E13C82A49AFD4DEDEF2C9C4F064C7DBBB4
+:1018900061A7D247BB6717101ED5E6EEF5D984D2F3
+:1018A00045534F174AE4B355698FC41E2957BD9954
+:1018B000BBE43D8D765F79B7467F41494C23E442D6
+:1018C00091FC7DBDFDC05BB02BBDDDE3D81E87EA7A
+:1018D000CDB9F6C7A2601FFE4C7EDC1394EFFF79F2
+:1018E000F11EBE679D8FF720D42E5937581EFABFC0
+:1018F000BA83F33EB125A81F72D830180E9523C8BD
+:10190000A37F90DDF130DDB76B7A5595D75D0B3A4B
+:101910005C85E711AC06C1AF85C021F345898C1306
+:10192000B6C3FF133DAAC7F84F719EBEDF2460C740
+:10193000D792FF62B82DDC8B7CC5B09FFC53ACF412
+:101940004FF00B5551DD5C9FEA6DB3F07DEF431D09
+:101950009F24E1FC24875C87A9EA78290EF9FB3EE5
+:101960002D5F203F18C7EF63DA3AE29077E8FDD5A4
+:10197000065F3AF0A28888E375BDBF46F5A703FF6E
+:101980002AA53B0BE3FBF2EDDA7C8255C082CF51F6
+:10199000AD487D171D2ADBF350BE3DA9C92BD98563
+:1019A0002C7EDFF1B2AC0FE876A042B327AFA13FA7
+:1019B00053EABD5DBF57A2A515D0F721EC43428184
+:1019C0001E17AFE0FACDE3050E096BEB795F595FA7
+:1019D000E2F1DA572E64A564629D362FD80E8D1B76
+:1019E000B02BD0FF04D6FF874C7174AECA9D8A73AA
+:1019F0002DEC54E99A229A2E961B571671DD4C78DD
+:101A0000386F0BC52B548E2617483A551A8615C6C3
+:101A100006ED779E6C7AC214B6337ED89D1FC53E04
+:101A20005A843AC50F4BE5BB81ABFE2658CF719E59
+:101A30001DD28E436DAE18AE95E3E52B1AD7C70FB6
+:101A40008147289E15EEC6A238C7B5FD3ABEE76DA0
+:101A50003A7E79A611C17498BFA66804B5CBADFFD4
+:101A60002C1DE479CF7758FCF0AB15A52BD7470F89
+:101A70002137D7F8831D41FE2B05FCF5F2FDC6F595
+:101A8000F00F6DAB15FF29D48B04E95533EB17E943
+:101A90004B905FB8B920A4EE50BE782CE26AE15EAC
+:101AA0003C167E86F46AA17388FC920CE42803BF7E
+:101AB00019F1701B8ACF5F0AE4BBA49B0BA49E6F35
+:101AC00099E90AC06ECE500D1C8787EEF765818CB0
+:101AD00027BAE322EFD7DF7380D9335449B74443A1
+:101AE000FFDBD0B7C4B84807EE830AF3C3E5BCC335
+:101AF000363BEA3781C397B9BE1B783862BEBC3724
+:101B000088102369BC2B615253B01FF975A13C6F3B
+:101B100078B68C5BEA324C7FBF3E941979B53EC4EF
+:101B200071436638DF97F4B67FCE7E2BD09963C7BA
+:101B3000BD466F376587A44F755FFF571CFC6B6F01
+:101B4000E75FF81D5AEF579FF0FBB48DDAFBC0D763
+:101B5000DAB5F75DDD8E48F4078A3F2AC2BC4D5ADC
+:101B60003B502790F562BDD5F35FBD1E1094078FE3
+:101B70002E1C3A0F8E714704D7091CF143D55582AC
+:101B8000EB04A969B24E801675825493AC130046DB
+:101B90009D002DEA04E8479D0030EA0480512700AB
+:101BA0008C3A015AD409D0FFC57CF95E2640422CFC
+:101BB000EB97116CDFEF6B56BD88CFEF3B2CEFA19D
+:101BC000EE6B54F89DD645FA3EFCDC35EF750E6A97
+:101BD000EF757CDBF85EAFAE4D75825575A6BE63C2
+:101BE000A8EBD4B52ACE35B02FF5F3F9FB1B3B7328
+:101BF000DE2D457FB3C96970804F97E250AFAAECE4
+:101C00006CE6FA5341FC6133F3B74511A897DE65E2
+:101C100091796E8D4ABD53F83E94E3E01A4B37E755
+:101C20001F557B157B59F07DEE4D9FB11D586B8B79
+:101C30006A029E353E9BBD6C88F71F7C2FEC1057C7
+:101C4000EF9B97C929A226A288EF9B97E19E995AFC
+:101C5000A17E65E4FB634A4C87431EF1AE2A03660E
+:101C6000DD2EF53EE43D556567EBFA4471ED3D34FC
+:101C70002A03E07FE8FDB3BB3032F64C380C859880
+:101C80008CB8A9F8F1B2FD6DF4BDFEAD168E3B56D1
+:101C9000E6BB97438E8E995C5C273976D8C6F9D11E
+:101CA000C7DBC60FAA937CEE725717F2FDFC68AE35
+:101CB0005BAC3229EC97F38BC7C5F3BB81E326F607
+:101CC0003F1DAE925ACC5B35C9C1F5A9428BB89F76
+:101CD000F7D1DE6951CBFA54B856F11A085E2C9C44
+:101CE00066E8CF22221BCB8B296203DE532D12F232
+:101CF0007D832E37ABB6291C1770A1200EF7929268
+:101D0000BE8B3AFFED32DE2F2CB5C8F835D120EF6F
+:101D1000B31337C9F72D3F126E33FCED72F28B68A7
+:101D2000C94FFEAE87FADDE1A393647CEE88C7FE5F
+:101D30008B4F98F8BD6F61FCF7D3DDECAF0BF81D4E
+:101D400083E2BF47BD72C3F5F527F41DC33193B4D9
+:101D50002F4447CE8BBA20975C9F71737BA2BE9CA9
+:101D6000DB1933A59DBEFA2E91786407FEE17DEF65
+:101D7000235F4C8C8F74C2DEE97A7FCDFBC430D9EF
+:101D8000EAEF13C7502B82DE276E713978FF44C308
+:101D9000C9A90ED0E3AF114ED0437FA7B86566C97D
+:101DA0002EF0C915253CF82EEE51B6125D8B701041
+:101DB00005756E9F4B45DDFAB062E777D1D7D8C97C
+:101DC0006D0FE31D4F5DAA62571CA8876F2D8C23F2
+:101DD000BC8B529219EFBA76592F650AC5A19EAEF7
+:101DE000E983CBDD563862A07F8EA617BD345FCA6B
+:101DF000C92D5EC8DBB7A8A33E87F91E6173366B99
+:101E0000F91AF83EE786315C4FD5E5A6BF25BE0935
+:101E100072F346A1F433A5A5EF98100774E5BA8FC5
+:101E2000E2FC0BCB3E7B388ECF37741D8BEC28DF6A
+:101E30004B86D6B174BBBC5BAB83C37E1AB53AABE1
+:101E400051ABB31AB53AAB51ABB31AB53AAB51ABD0
+:101E5000B31AB53AAB51ABB31AB53AAB91EB772B9A
+:101E6000B87DBB7E35B7DDF51E1E0FB2FFEF5DC737
+:101E7000FE87D6413FC2BCD03AA8B03AA2D98F92D1
+:101E80007ECBFA7348DDB378F8920D44BFFC06B3FD
+:101E9000135D7A1D14EF97EF8B607B70B170C8FAF9
+:101EA000A74EB708AE97F60BDB14D03F2F639CD13B
+:101EB00040E37FD5F8A0D71FA11F381FF4032DF4EE
+:101EC000C39836A01FCF984985B3A5BFF7B0BFB759
+:101ED000315FD7AF21FB41F052611F643F2E86D89E
+:101EE0000F4A3CEE061ECB3AE5BB26FDFD661E35CD
+:101EF0005F4E19C29EF8A43D1913E6DB87EF8CA94B
+:101F00000DE3F7C1C7B4F758C736CA777165A28425
+:101F1000BF3B845D89023F960EEF7BFF699ABF74D9
+:101F20007304C72DEB472E9BF6BFB12B9F150AA656
+:101F3000DB6FEAFD951F132E056152FE0ACC2203CA
+:101F4000F735C210C67A50A86E51703FBAEA5E31BA
+:101F5000197C2EB094EC009EF1DAFDB688D5EAAD7E
+:101F6000C6EE8A3D049F8C4B74E25E6B74C2218185
+:101F7000F74F8575C599B08BFE31EE09453978BFAD
+:101F8000BC55C1FAF04C79FE3B8AC39B205781C3F4
+:101F9000E373C0EF7916471BEA00CEA284A5C8F30D
+:101FA000E7453B72500770768D9270BCA34D71224D
+:101FB000944D585AC0EFCFAC5B3FB6E2DD9A22A2F7
+:101FC000E95C9661EE1C7CA7A6F85399378B3EF628
+:101FD000633717C9FC6BC46BC28F7BABBE59917C56
+:101FE0007F26321D3918A7B8F2BB45241F7FFC9EFF
+:101FF000EB16AC4FD4F08CC72DA20AAE76DBD09E88
+:10200000D0EEF3BA0CEE52B445511E23F71BBCD9E7
+:1020100068DF34F87E8C7E92E722EC57F4D8E489AE
+:102020001904275A7C6C273B5CAE5BB1FFAB335D78
+:10203000C5180FAD9F83B7C8F3099FDB302FF41D80
+:1020400096CECFA54552EECB8AA4FD98BE56DEC7EC
+:1020500086F2BDACC8A0D9B7BF8F37E15B8AEFE984
+:10206000F88BAD8BB3810FE17B2FF0247C17625C82
+:1020700044C470BDE3FA72E6E1EF951549F9227B9D
+:1020800056F5B1B467DCA61BBDC3103F8EFA857749
+:1020900018F01DD5D867C3BFC378D6D367837F7FB9
+:1020A000F6C13E1BFA9F75C977D2A1FB3716C9F757
+:1020B00013E9D3FB78FD58FA5637C7E97DC31047BB
+:1020C000A5977FBC5EDEBB64B07F19ABF997B1BF4B
+:1020D0004869EF21791BFB6434DF6F8B82581EAF98
+:1020E000B44A3DADFC45D9A1366AC76F277C83E26F
+:1020F000AF095EC27B505C64EC97EF2D09069DF63C
+:102100009A1886CC22BEAA11F2BDE528CD6E206EAB
+:102110002B25BB50537EF432BF03C07AEC8F3B5B60
+:10212000C85FBB49C2E4AE918F2E9FBFA68BF3C39D
+:10213000ED57FBB57CB3753DF2678ADF06F5579620
+:102140001DE982BFA9DA3BB8BF66C5679CC752FCD0
+:1021500036A8FFDE1F7FC0EF6CEADA07F7137F9F18
+:10216000029F75FE1E33F92620DF3B5613E694FFCF
+:102170007EC0B712FADE541DC1EF6777FD3A8FE5D6
+:1021800046E737AD6FFA76F2B196E77BF24406F494
+:10219000E19BDA5ED8A7B441F6C9C375BED9916C8C
+:1021A00077EAB4FCAAB6CCCE7E3EB1D6CAF6AB5026
+:1021B0000D7302AE354A3B238A55CD4EF958FF4F79
+:1021C000DE3E8CEB797C00C03193F8DD71DC5A097E
+:1021D000F78DB0B07D28349454EFA1F6A86105DBEB
+:1021E0008104BCB824BE3F03FBA0427F655DB5CE31
+:1021F000EC53E4FDBE2307F9AE7EDFD4B0D1DB7A29
+:1022000010F9B2E27D7219EA8A7746F0FD4100F5D5
+:10221000463A4FC33069471B16A4B31F088892D2B1
+:10222000958843E68771FDB16198E351DC27365408
+:102230004CE438FAD07F4BBFDB37D7EA441CD530AB
+:10224000D9B106EF551A7EE1E0F15714B99FE75175
+:10225000499F86B9F2FC0D15319CF7E87C686874DB
+:102260008DC4FDD4CC31EEFF00DF4769F7730DC993
+:10227000D44FED134AC9821F619F4912DF19331DE4
+:10228000AC77C7164C7C74B783DD891FF74475B3F0
+:102290002307E5C5FF033C759D8B10370000000048
+:1022A0000000000000000000050207000000000020
+:00000001FF
diff --git a/fs/9p/cache.c b/fs/9p/cache.c
index 51c94e2..e777961 100644
--- a/fs/9p/cache.c
+++ b/fs/9p/cache.c
@@ -343,18 +343,7 @@
 
 	BUG_ON(!vcookie->fscache);
 
-	if (PageFsCache(page)) {
-		if (fscache_check_page_write(vcookie->fscache, page)) {
-			if (!(gfp & __GFP_WAIT))
-				return 0;
-			fscache_wait_on_page_write(vcookie->fscache, page);
-		}
-
-		fscache_uncache_page(vcookie->fscache, page);
-		ClearPageFsCache(page);
-	}
-
-	return 1;
+	return fscache_maybe_release_page(vcookie->fscache, page, gfp);
 }
 
 void __v9fs_fscache_invalidate_page(struct page *page)
@@ -368,7 +357,6 @@
 		fscache_wait_on_page_write(vcookie->fscache, page);
 		BUG_ON(!PageLocked(page));
 		fscache_uncache_page(vcookie->fscache, page);
-		ClearPageFsCache(page);
 	}
 }
 
diff --git a/fs/afs/file.c b/fs/afs/file.c
index 681c2a7..39b3016 100644
--- a/fs/afs/file.c
+++ b/fs/afs/file.c
@@ -315,7 +315,6 @@
 			struct afs_vnode *vnode = AFS_FS_I(page->mapping->host);
 			fscache_wait_on_page_write(vnode->cache, page);
 			fscache_uncache_page(vnode->cache, page);
-			ClearPageFsCache(page);
 		}
 #endif
 
@@ -349,17 +348,9 @@
 	/* deny if page is being written to the cache and the caller hasn't
 	 * elected to wait */
 #ifdef CONFIG_AFS_FSCACHE
-	if (PageFsCache(page)) {
-		if (fscache_check_page_write(vnode->cache, page)) {
-			if (!(gfp_flags & __GFP_WAIT)) {
-				_leave(" = F [cache busy]");
-				return 0;
-			}
-			fscache_wait_on_page_write(vnode->cache, page);
-		}
-
-		fscache_uncache_page(vnode->cache, page);
-		ClearPageFsCache(page);
+	if (!fscache_maybe_release_page(vnode->cache, page, gfp_flags)) {
+		_leave(" = F [cache busy]");
+		return 0;
 	}
 #endif
 
diff --git a/fs/aio.c b/fs/aio.c
index 02a2c93..c30dfc0 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -15,6 +15,7 @@
 #include <linux/aio_abi.h>
 #include <linux/module.h>
 #include <linux/syscalls.h>
+#include <linux/backing-dev.h>
 #include <linux/uio.h>
 
 #define DEBUG 0
@@ -32,6 +33,9 @@
 #include <linux/workqueue.h>
 #include <linux/security.h>
 #include <linux/eventfd.h>
+#include <linux/blkdev.h>
+#include <linux/mempool.h>
+#include <linux/hash.h>
 
 #include <asm/kmap_types.h>
 #include <asm/uaccess.h>
@@ -60,6 +64,14 @@
 static DEFINE_SPINLOCK(fput_lock);
 static LIST_HEAD(fput_head);
 
+#define AIO_BATCH_HASH_BITS	3 /* allocated on-stack, so don't go crazy */
+#define AIO_BATCH_HASH_SIZE	(1 << AIO_BATCH_HASH_BITS)
+struct aio_batch_entry {
+	struct hlist_node list;
+	struct address_space *mapping;
+};
+mempool_t *abe_pool;
+
 static void aio_kick_handler(struct work_struct *);
 static void aio_queue_work(struct kioctx *);
 
@@ -73,6 +85,8 @@
 	kioctx_cachep = KMEM_CACHE(kioctx,SLAB_HWCACHE_ALIGN|SLAB_PANIC);
 
 	aio_wq = create_workqueue("aio");
+	abe_pool = mempool_create_kmalloc_pool(1, sizeof(struct aio_batch_entry));
+	BUG_ON(!abe_pool);
 
 	pr_debug("aio_setup: sizeof(struct page) = %d\n", (int)sizeof(struct page));
 
@@ -1531,8 +1545,44 @@
 	return 1;
 }
 
+static void aio_batch_add(struct address_space *mapping,
+			  struct hlist_head *batch_hash)
+{
+	struct aio_batch_entry *abe;
+	struct hlist_node *pos;
+	unsigned bucket;
+
+	bucket = hash_ptr(mapping, AIO_BATCH_HASH_BITS);
+	hlist_for_each_entry(abe, pos, &batch_hash[bucket], list) {
+		if (abe->mapping == mapping)
+			return;
+	}
+
+	abe = mempool_alloc(abe_pool, GFP_KERNEL);
+	BUG_ON(!igrab(mapping->host));
+	abe->mapping = mapping;
+	hlist_add_head(&abe->list, &batch_hash[bucket]);
+	return;
+}
+
+static void aio_batch_free(struct hlist_head *batch_hash)
+{
+	struct aio_batch_entry *abe;
+	struct hlist_node *pos, *n;
+	int i;
+
+	for (i = 0; i < AIO_BATCH_HASH_SIZE; i++) {
+		hlist_for_each_entry_safe(abe, pos, n, &batch_hash[i], list) {
+			blk_run_address_space(abe->mapping);
+			iput(abe->mapping->host);
+			hlist_del(&abe->list);
+			mempool_free(abe, abe_pool);
+		}
+	}
+}
+
 static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb,
-			 struct iocb *iocb)
+			 struct iocb *iocb, struct hlist_head *batch_hash)
 {
 	struct kiocb *req;
 	struct file *file;
@@ -1608,6 +1658,12 @@
 			;
 	}
 	spin_unlock_irq(&ctx->ctx_lock);
+	if (req->ki_opcode == IOCB_CMD_PREAD ||
+	    req->ki_opcode == IOCB_CMD_PREADV ||
+	    req->ki_opcode == IOCB_CMD_PWRITE ||
+	    req->ki_opcode == IOCB_CMD_PWRITEV)
+		aio_batch_add(file->f_mapping, batch_hash);
+
 	aio_put_req(req);	/* drop extra ref to req */
 	return 0;
 
@@ -1635,6 +1691,7 @@
 	struct kioctx *ctx;
 	long ret = 0;
 	int i;
+	struct hlist_head batch_hash[AIO_BATCH_HASH_SIZE] = { { 0, }, };
 
 	if (unlikely(nr < 0))
 		return -EINVAL;
@@ -1666,10 +1723,11 @@
 			break;
 		}
 
-		ret = io_submit_one(ctx, user_iocb, &tmp);
+		ret = io_submit_one(ctx, user_iocb, &tmp, batch_hash);
 		if (ret)
 			break;
 	}
+	aio_batch_free(batch_hash);
 
 	put_ioctx(ctx);
 	return i ? i : ret;
diff --git a/fs/bio.c b/fs/bio.c
index 12da5db..e23a63f 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1393,6 +1393,18 @@
 	}
 }
 
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+void bio_flush_dcache_pages(struct bio *bi)
+{
+	int i;
+	struct bio_vec *bvec;
+
+	bio_for_each_segment(bvec, bi, i)
+		flush_dcache_page(bvec->bv_page);
+}
+EXPORT_SYMBOL(bio_flush_dcache_pages);
+#endif
+
 /**
  * bio_endio - end I/O on a bio
  * @bio:	bio
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 8bed055..73d6a73 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -405,7 +405,17 @@
  
 static int block_fsync(struct file *filp, struct dentry *dentry, int datasync)
 {
-	return sync_blockdev(I_BDEV(filp->f_mapping->host));
+	struct block_device *bdev = I_BDEV(filp->f_mapping->host);
+	int error;
+
+	error = sync_blockdev(bdev);
+	if (error)
+		return error;
+	
+	error = blkdev_issue_flush(bdev, NULL);
+	if (error == -EOPNOTSUPP)
+		error = 0;
+	return error;
 }
 
 /*
diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c
index 431accd..2708931 100644
--- a/fs/cachefiles/interface.c
+++ b/fs/cachefiles/interface.c
@@ -114,8 +114,9 @@
 
 /*
  * attempt to look up the nominated node in this cache
+ * - return -ETIMEDOUT to be scheduled again
  */
-static void cachefiles_lookup_object(struct fscache_object *_object)
+static int cachefiles_lookup_object(struct fscache_object *_object)
 {
 	struct cachefiles_lookup_data *lookup_data;
 	struct cachefiles_object *parent, *object;
@@ -145,13 +146,15 @@
 	    object->fscache.cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX)
 		cachefiles_attr_changed(&object->fscache);
 
-	if (ret < 0) {
-		printk(KERN_WARNING "CacheFiles: Lookup failed error %d\n",
-		       ret);
+	if (ret < 0 && ret != -ETIMEDOUT) {
+		if (ret != -ENOBUFS)
+			printk(KERN_WARNING
+			       "CacheFiles: Lookup failed error %d\n", ret);
 		fscache_object_lookup_error(&object->fscache);
 	}
 
 	_leave(" [%d]", ret);
+	return ret;
 }
 
 /*
@@ -331,6 +334,7 @@
 		}
 
 		cache = object->fscache.cache;
+		fscache_object_destroy(&object->fscache);
 		kmem_cache_free(cachefiles_object_jar, object);
 		fscache_object_destroyed(cache);
 	}
@@ -403,12 +407,26 @@
 	if (oi_size == ni_size)
 		return 0;
 
-	newattrs.ia_size = ni_size;
-	newattrs.ia_valid = ATTR_SIZE;
-
 	cachefiles_begin_secure(cache, &saved_cred);
 	mutex_lock(&object->backer->d_inode->i_mutex);
+
+	/* if there's an extension to a partial page at the end of the backing
+	 * file, we need to discard the partial page so that we pick up new
+	 * data after it */
+	if (oi_size & ~PAGE_MASK && ni_size > oi_size) {
+		_debug("discard tail %llx", oi_size);
+		newattrs.ia_valid = ATTR_SIZE;
+		newattrs.ia_size = oi_size & PAGE_MASK;
+		ret = notify_change(object->backer, &newattrs);
+		if (ret < 0)
+			goto truncate_failed;
+	}
+
+	newattrs.ia_valid = ATTR_SIZE;
+	newattrs.ia_size = ni_size;
 	ret = notify_change(object->backer, &newattrs);
+
+truncate_failed:
 	mutex_unlock(&object->backer->d_inode->i_mutex);
 	cachefiles_end_secure(cache, saved_cred);
 
diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c
index 4ce818a..14ac480 100644
--- a/fs/cachefiles/namei.c
+++ b/fs/cachefiles/namei.c
@@ -21,17 +21,81 @@
 #include <linux/security.h>
 #include "internal.h"
 
-static int cachefiles_wait_bit(void *flags)
+#define CACHEFILES_KEYBUF_SIZE 512
+
+/*
+ * dump debugging info about an object
+ */
+static noinline
+void __cachefiles_printk_object(struct cachefiles_object *object,
+				const char *prefix,
+				u8 *keybuf)
 {
-	schedule();
-	return 0;
+	struct fscache_cookie *cookie;
+	unsigned keylen, loop;
+
+	printk(KERN_ERR "%sobject: OBJ%x\n",
+	       prefix, object->fscache.debug_id);
+	printk(KERN_ERR "%sobjstate=%s fl=%lx swfl=%lx ev=%lx[%lx]\n",
+	       prefix, fscache_object_states[object->fscache.state],
+	       object->fscache.flags, object->fscache.work.flags,
+	       object->fscache.events,
+	       object->fscache.event_mask & FSCACHE_OBJECT_EVENTS_MASK);
+	printk(KERN_ERR "%sops=%u inp=%u exc=%u\n",
+	       prefix, object->fscache.n_ops, object->fscache.n_in_progress,
+	       object->fscache.n_exclusive);
+	printk(KERN_ERR "%sparent=%p\n",
+	       prefix, object->fscache.parent);
+
+	spin_lock(&object->fscache.lock);
+	cookie = object->fscache.cookie;
+	if (cookie) {
+		printk(KERN_ERR "%scookie=%p [pr=%p nd=%p fl=%lx]\n",
+		       prefix,
+		       object->fscache.cookie,
+		       object->fscache.cookie->parent,
+		       object->fscache.cookie->netfs_data,
+		       object->fscache.cookie->flags);
+		if (keybuf)
+			keylen = cookie->def->get_key(cookie->netfs_data, keybuf,
+						      CACHEFILES_KEYBUF_SIZE);
+		else
+			keylen = 0;
+	} else {
+		printk(KERN_ERR "%scookie=NULL\n", prefix);
+		keylen = 0;
+	}
+	spin_unlock(&object->fscache.lock);
+
+	if (keylen) {
+		printk(KERN_ERR "%skey=[%u] '", prefix, keylen);
+		for (loop = 0; loop < keylen; loop++)
+			printk("%02x", keybuf[loop]);
+		printk("'\n");
+	}
+}
+
+/*
+ * dump debugging info about a pair of objects
+ */
+static noinline void cachefiles_printk_object(struct cachefiles_object *object,
+					      struct cachefiles_object *xobject)
+{
+	u8 *keybuf;
+
+	keybuf = kmalloc(CACHEFILES_KEYBUF_SIZE, GFP_NOIO);
+	if (object)
+		__cachefiles_printk_object(object, "", keybuf);
+	if (xobject)
+		__cachefiles_printk_object(xobject, "x", keybuf);
+	kfree(keybuf);
 }
 
 /*
  * record the fact that an object is now active
  */
-static void cachefiles_mark_object_active(struct cachefiles_cache *cache,
-					  struct cachefiles_object *object)
+static int cachefiles_mark_object_active(struct cachefiles_cache *cache,
+					 struct cachefiles_object *object)
 {
 	struct cachefiles_object *xobject;
 	struct rb_node **_p, *_parent = NULL;
@@ -42,8 +106,11 @@
 try_again:
 	write_lock(&cache->active_lock);
 
-	if (test_and_set_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags))
+	if (test_and_set_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags)) {
+		printk(KERN_ERR "CacheFiles: Error: Object already active\n");
+		cachefiles_printk_object(object, NULL);
 		BUG();
+	}
 
 	dentry = object->dentry;
 	_p = &cache->active_nodes.rb_node;
@@ -66,8 +133,8 @@
 	rb_insert_color(&object->active_node, &cache->active_nodes);
 
 	write_unlock(&cache->active_lock);
-	_leave("");
-	return;
+	_leave(" = 0");
+	return 0;
 
 	/* an old object from a previous incarnation is hogging the slot - we
 	 * need to wait for it to be destroyed */
@@ -76,44 +143,70 @@
 		printk(KERN_ERR "\n");
 		printk(KERN_ERR "CacheFiles: Error:"
 		       " Unexpected object collision\n");
-		printk(KERN_ERR "xobject: OBJ%x\n",
-		       xobject->fscache.debug_id);
-		printk(KERN_ERR "xobjstate=%s\n",
-		       fscache_object_states[xobject->fscache.state]);
-		printk(KERN_ERR "xobjflags=%lx\n", xobject->fscache.flags);
-		printk(KERN_ERR "xobjevent=%lx [%lx]\n",
-		       xobject->fscache.events, xobject->fscache.event_mask);
-		printk(KERN_ERR "xops=%u inp=%u exc=%u\n",
-		       xobject->fscache.n_ops, xobject->fscache.n_in_progress,
-		       xobject->fscache.n_exclusive);
-		printk(KERN_ERR "xcookie=%p [pr=%p nd=%p fl=%lx]\n",
-		       xobject->fscache.cookie,
-		       xobject->fscache.cookie->parent,
-		       xobject->fscache.cookie->netfs_data,
-		       xobject->fscache.cookie->flags);
-		printk(KERN_ERR "xparent=%p\n",
-		       xobject->fscache.parent);
-		printk(KERN_ERR "object: OBJ%x\n",
-		       object->fscache.debug_id);
-		printk(KERN_ERR "cookie=%p [pr=%p nd=%p fl=%lx]\n",
-		       object->fscache.cookie,
-		       object->fscache.cookie->parent,
-		       object->fscache.cookie->netfs_data,
-		       object->fscache.cookie->flags);
-		printk(KERN_ERR "parent=%p\n",
-		       object->fscache.parent);
+		cachefiles_printk_object(object, xobject);
 		BUG();
 	}
 	atomic_inc(&xobject->usage);
 	write_unlock(&cache->active_lock);
 
-	_debug(">>> wait");
-	wait_on_bit(&xobject->flags, CACHEFILES_OBJECT_ACTIVE,
-		    cachefiles_wait_bit, TASK_UNINTERRUPTIBLE);
-	_debug("<<< waited");
+	if (test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) {
+		wait_queue_head_t *wq;
+
+		signed long timeout = 60 * HZ;
+		wait_queue_t wait;
+		bool requeue;
+
+		/* if the object we're waiting for is queued for processing,
+		 * then just put ourselves on the queue behind it */
+		if (slow_work_is_queued(&xobject->fscache.work)) {
+			_debug("queue OBJ%x behind OBJ%x immediately",
+			       object->fscache.debug_id,
+			       xobject->fscache.debug_id);
+			goto requeue;
+		}
+
+		/* otherwise we sleep until either the object we're waiting for
+		 * is done, or the slow-work facility wants the thread back to
+		 * do other work */
+		wq = bit_waitqueue(&xobject->flags, CACHEFILES_OBJECT_ACTIVE);
+		init_wait(&wait);
+		requeue = false;
+		do {
+			prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+			if (!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags))
+				break;
+			requeue = slow_work_sleep_till_thread_needed(
+				&object->fscache.work, &timeout);
+		} while (timeout > 0 && !requeue);
+		finish_wait(wq, &wait);
+
+		if (requeue &&
+		    test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) {
+			_debug("queue OBJ%x behind OBJ%x after wait",
+			       object->fscache.debug_id,
+			       xobject->fscache.debug_id);
+			goto requeue;
+		}
+
+		if (timeout <= 0) {
+			printk(KERN_ERR "\n");
+			printk(KERN_ERR "CacheFiles: Error: Overlong"
+			       " wait for old active object to go away\n");
+			cachefiles_printk_object(object, xobject);
+			goto requeue;
+		}
+	}
+
+	ASSERT(!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags));
 
 	cache->cache.ops->put_object(&xobject->fscache);
 	goto try_again;
+
+requeue:
+	clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags);
+	cache->cache.ops->put_object(&xobject->fscache);
+	_leave(" = -ETIMEDOUT");
+	return -ETIMEDOUT;
 }
 
 /*
@@ -254,7 +347,7 @@
 
 	dir = dget_parent(object->dentry);
 
-	mutex_lock(&dir->d_inode->i_mutex);
+	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
 	ret = cachefiles_bury_object(cache, dir, object->dentry);
 
 	dput(dir);
@@ -307,7 +400,7 @@
 	/* search the current directory for the element name */
 	_debug("lookup '%s'", name);
 
-	mutex_lock(&dir->d_inode->i_mutex);
+	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
 
 	start = jiffies;
 	next = lookup_one_len(name, dir, nlen);
@@ -418,12 +511,15 @@
 	}
 
 	/* note that we're now using this object */
-	cachefiles_mark_object_active(cache, object);
+	ret = cachefiles_mark_object_active(cache, object);
 
 	mutex_unlock(&dir->d_inode->i_mutex);
 	dput(dir);
 	dir = NULL;
 
+	if (ret == -ETIMEDOUT)
+		goto mark_active_timed_out;
+
 	_debug("=== OBTAINED_OBJECT ===");
 
 	if (object->new) {
@@ -467,6 +563,10 @@
 		cachefiles_io_error(cache, "Create/mkdir failed");
 	goto error;
 
+mark_active_timed_out:
+	_debug("mark active timed out");
+	goto release_dentry;
+
 check_error:
 	_debug("check error %d", ret);
 	write_lock(&cache->active_lock);
@@ -474,7 +574,7 @@
 	clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags);
 	wake_up_bit(&object->flags, CACHEFILES_OBJECT_ACTIVE);
 	write_unlock(&cache->active_lock);
-
+release_dentry:
 	dput(object->dentry);
 	object->dentry = NULL;
 	goto error_out;
@@ -495,9 +595,6 @@
 error_out2:
 	dput(dir);
 error_out:
-	if (ret == -ENOSPC)
-		ret = -ENOBUFS;
-
 	_leave(" = error %d", -ret);
 	return ret;
 }
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c
index a69787e..a6c8c6f 100644
--- a/fs/cachefiles/rdwr.c
+++ b/fs/cachefiles/rdwr.c
@@ -11,6 +11,7 @@
 
 #include <linux/mount.h>
 #include <linux/file.h>
+#include <linux/ima.h>
 #include "internal.h"
 
 /*
@@ -40,8 +41,10 @@
 
 	_debug("--- monitor %p %lx ---", page, page->flags);
 
-	if (!PageUptodate(page) && !PageError(page))
-		dump_stack();
+	if (!PageUptodate(page) && !PageError(page)) {
+		/* unlocked, not uptodate and not erronous? */
+		_debug("page probably truncated");
+	}
 
 	/* remove from the waitqueue */
 	list_del(&wait->task_list);
@@ -61,6 +64,84 @@
 }
 
 /*
+ * handle a probably truncated page
+ * - check to see if the page is still relevant and reissue the read if
+ *   possible
+ * - return -EIO on error, -ENODATA if the page is gone, -EINPROGRESS if we
+ *   must wait again and 0 if successful
+ */
+static int cachefiles_read_reissue(struct cachefiles_object *object,
+				   struct cachefiles_one_read *monitor)
+{
+	struct address_space *bmapping = object->backer->d_inode->i_mapping;
+	struct page *backpage = monitor->back_page, *backpage2;
+	int ret;
+
+	kenter("{ino=%lx},{%lx,%lx}",
+	       object->backer->d_inode->i_ino,
+	       backpage->index, backpage->flags);
+
+	/* skip if the page was truncated away completely */
+	if (backpage->mapping != bmapping) {
+		kleave(" = -ENODATA [mapping]");
+		return -ENODATA;
+	}
+
+	backpage2 = find_get_page(bmapping, backpage->index);
+	if (!backpage2) {
+		kleave(" = -ENODATA [gone]");
+		return -ENODATA;
+	}
+
+	if (backpage != backpage2) {
+		put_page(backpage2);
+		kleave(" = -ENODATA [different]");
+		return -ENODATA;
+	}
+
+	/* the page is still there and we already have a ref on it, so we don't
+	 * need a second */
+	put_page(backpage2);
+
+	INIT_LIST_HEAD(&monitor->op_link);
+	add_page_wait_queue(backpage, &monitor->monitor);
+
+	if (trylock_page(backpage)) {
+		ret = -EIO;
+		if (PageError(backpage))
+			goto unlock_discard;
+		ret = 0;
+		if (PageUptodate(backpage))
+			goto unlock_discard;
+
+		kdebug("reissue read");
+		ret = bmapping->a_ops->readpage(NULL, backpage);
+		if (ret < 0)
+			goto unlock_discard;
+	}
+
+	/* but the page may have been read before the monitor was installed, so
+	 * the monitor may miss the event - so we have to ensure that we do get
+	 * one in such a case */
+	if (trylock_page(backpage)) {
+		_debug("jumpstart %p {%lx}", backpage, backpage->flags);
+		unlock_page(backpage);
+	}
+
+	/* it'll reappear on the todo list */
+	kleave(" = -EINPROGRESS");
+	return -EINPROGRESS;
+
+unlock_discard:
+	unlock_page(backpage);
+	spin_lock_irq(&object->work_lock);
+	list_del(&monitor->op_link);
+	spin_unlock_irq(&object->work_lock);
+	kleave(" = %d", ret);
+	return ret;
+}
+
+/*
  * copy data from backing pages to netfs pages to complete a read operation
  * - driven by FS-Cache's thread pool
  */
@@ -92,20 +173,26 @@
 
 		_debug("- copy {%lu}", monitor->back_page->index);
 
-		error = -EIO;
+	recheck:
 		if (PageUptodate(monitor->back_page)) {
 			copy_highpage(monitor->netfs_page, monitor->back_page);
 
 			pagevec_add(&pagevec, monitor->netfs_page);
 			fscache_mark_pages_cached(monitor->op, &pagevec);
 			error = 0;
-		}
-
-		if (error)
+		} else if (!PageError(monitor->back_page)) {
+			/* the page has probably been truncated */
+			error = cachefiles_read_reissue(object, monitor);
+			if (error == -EINPROGRESS)
+				goto next;
+			goto recheck;
+		} else {
 			cachefiles_io_error_obj(
 				object,
 				"Readpage failed on backing file %lx",
 				(unsigned long) monitor->back_page->flags);
+			error = -EIO;
+		}
 
 		page_cache_release(monitor->back_page);
 
@@ -114,6 +201,7 @@
 		fscache_put_retrieval(op);
 		kfree(monitor);
 
+	next:
 		/* let the thread pool have some air occasionally */
 		max--;
 		if (max < 0 || need_resched()) {
@@ -333,7 +421,8 @@
 
 	shift = PAGE_SHIFT - inode->i_sb->s_blocksize_bits;
 
-	op->op.flags = FSCACHE_OP_FAST;
+	op->op.flags &= FSCACHE_OP_KEEP_FLAGS;
+	op->op.flags |= FSCACHE_OP_FAST;
 	op->op.processor = cachefiles_read_copier;
 
 	pagevec_init(&pagevec, 0);
@@ -639,7 +728,8 @@
 
 	pagevec_init(&pagevec, 0);
 
-	op->op.flags = FSCACHE_OP_FAST;
+	op->op.flags &= FSCACHE_OP_KEEP_FLAGS;
+	op->op.flags |= FSCACHE_OP_FAST;
 	op->op.processor = cachefiles_read_copier;
 
 	INIT_LIST_HEAD(&backpages);
@@ -801,7 +891,8 @@
 	struct cachefiles_cache *cache;
 	mm_segment_t old_fs;
 	struct file *file;
-	loff_t pos;
+	loff_t pos, eof;
+	size_t len;
 	void *data;
 	int ret;
 
@@ -832,18 +923,33 @@
 	if (IS_ERR(file)) {
 		ret = PTR_ERR(file);
 	} else {
+		ima_counts_get(file);
 		ret = -EIO;
 		if (file->f_op->write) {
 			pos = (loff_t) page->index << PAGE_SHIFT;
+
+			/* we mustn't write more data than we have, so we have
+			 * to beware of a partial page at EOF */
+			eof = object->fscache.store_limit_l;
+			len = PAGE_SIZE;
+			if (eof & ~PAGE_MASK) {
+				ASSERTCMP(pos, <, eof);
+				if (eof - pos < PAGE_SIZE) {
+					_debug("cut short %llx to %llx",
+					       pos, eof);
+					len = eof - pos;
+					ASSERTCMP(pos + len, ==, eof);
+				}
+			}
+
 			data = kmap(page);
 			old_fs = get_fs();
 			set_fs(KERNEL_DS);
 			ret = file->f_op->write(
-				file, (const void __user *) data, PAGE_SIZE,
-				&pos);
+				file, (const void __user *) data, len, &pos);
 			set_fs(old_fs);
 			kunmap(page);
-			if (ret != PAGE_SIZE)
+			if (ret != len)
 				ret = -EIO;
 		}
 		fput(file);
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 145540a..094ea65 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,12 @@
+Version 1.61
+------------
+Fix append problem to Samba servers (files opened with O_APPEND could
+have duplicated data). Fix oops in cifs_lookup. Workaround problem
+mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session.
+Disable use of server inode numbers when server only
+partially supports them (e.g. for one server querying inode numbers on
+FindFirst fails but QPathInfo queries works).
+
 Version 1.60
 -------------
 Fix memory leak in reconnect.  Fix oops in DFS mount error path.
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 9a5e4f5..29f1da7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1037,7 +1037,7 @@
 	if (rc)
 		goto out_unregister_key_type;
 #endif
-	rc = slow_work_register_user();
+	rc = slow_work_register_user(THIS_MODULE);
 	if (rc)
 		goto out_unregister_resolver_key;
 
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 627a60a..1f42f77 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -214,8 +214,6 @@
 		posix_flags |= SMB_O_EXCL;
 	if (oflags & O_TRUNC)
 		posix_flags |= SMB_O_TRUNC;
-	if (oflags & O_APPEND)
-		posix_flags |= SMB_O_APPEND;
 	if (oflags & O_SYNC)
 		posix_flags |= SMB_O_SYNC;
 	if (oflags & O_DIRECTORY)
@@ -643,9 +641,9 @@
 	 * O_EXCL: optimize away the lookup, but don't hash the dentry. Let
 	 * the VFS handle the create.
 	 */
-	if (nd->flags & LOOKUP_EXCL) {
+	if (nd && (nd->flags & LOOKUP_EXCL)) {
 		d_instantiate(direntry, NULL);
-		return 0;
+		return NULL;
 	}
 
 	/* can not grab the rename sem here since it would
@@ -675,7 +673,7 @@
 	 * reduction in network traffic in the other paths.
 	 */
 	if (pTcon->unix_ext) {
-		if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+		if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
 		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
 		     (nd->intent.open.flags & O_CREAT)) {
 			rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
diff --git a/fs/coda/sysctl.c b/fs/coda/sysctl.c
index 43c96ce..c6405ce 100644
--- a/fs/coda/sysctl.c
+++ b/fs/coda/sysctl.c
@@ -17,28 +17,25 @@
 
 static ctl_table coda_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "timeout",
 		.data		= &coda_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "hard",
 		.data		= &coda_hard,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "fake_statfs",
 		.data		= &coda_fake_statfs,
 		.maxlen		= sizeof(int),
 		.mode		= 0600,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{}
 };
@@ -46,7 +43,6 @@
 #ifdef CONFIG_SYSCTL
 static ctl_table fs_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "coda",
 		.mode		= 0555,
 		.child		= coda_table
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index d84e705..229e722 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -246,428 +246,6 @@
 	return err;
 }
 
-#ifdef CONFIG_NET
-static int do_siocgstamp(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct compat_timeval __user *up = compat_ptr(arg);
-	struct timeval ktv;
-	mm_segment_t old_fs = get_fs();
-	int err;
-
-	set_fs(KERNEL_DS);
-	err = sys_ioctl(fd, cmd, (unsigned long)&ktv);
-	set_fs(old_fs);
-	if(!err) {
-		err = put_user(ktv.tv_sec, &up->tv_sec);
-		err |= __put_user(ktv.tv_usec, &up->tv_usec);
-	}
-	return err;
-}
-
-static int do_siocgstampns(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct compat_timespec __user *up = compat_ptr(arg);
-	struct timespec kts;
-	mm_segment_t old_fs = get_fs();
-	int err;
-
-	set_fs(KERNEL_DS);
-	err = sys_ioctl(fd, cmd, (unsigned long)&kts);
-	set_fs(old_fs);
-	if (!err) {
-		err = put_user(kts.tv_sec, &up->tv_sec);
-		err |= __put_user(kts.tv_nsec, &up->tv_nsec);
-	}
-	return err;
-}
-
-struct ifmap32 {
-	compat_ulong_t mem_start;
-	compat_ulong_t mem_end;
-	unsigned short base_addr;
-	unsigned char irq;
-	unsigned char dma;
-	unsigned char port;
-};
-
-struct ifreq32 {
-#define IFHWADDRLEN     6
-#define IFNAMSIZ        16
-        union {
-                char    ifrn_name[IFNAMSIZ];            /* if name, e.g. "en0" */
-        } ifr_ifrn;
-        union {
-                struct  sockaddr ifru_addr;
-                struct  sockaddr ifru_dstaddr;
-                struct  sockaddr ifru_broadaddr;
-                struct  sockaddr ifru_netmask;
-                struct  sockaddr ifru_hwaddr;
-                short   ifru_flags;
-                compat_int_t     ifru_ivalue;
-                compat_int_t     ifru_mtu;
-                struct  ifmap32 ifru_map;
-                char    ifru_slave[IFNAMSIZ];   /* Just fits the size */
-		char	ifru_newname[IFNAMSIZ];
-                compat_caddr_t ifru_data;
-	    /* XXXX? ifru_settings should be here */
-        } ifr_ifru;
-};
-
-struct ifconf32 {
-        compat_int_t	ifc_len;                        /* size of buffer       */
-        compat_caddr_t  ifcbuf;
-};
-
-static int dev_ifname32(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct ifreq __user *uifr;
-	int err;
-
-	uifr = compat_alloc_user_space(sizeof(struct ifreq));
-	if (copy_in_user(uifr, compat_ptr(arg), sizeof(struct ifreq32)))
-		return -EFAULT;
-
-	err = sys_ioctl(fd, SIOCGIFNAME, (unsigned long)uifr);
-	if (err)
-		return err;
-
-	if (copy_in_user(compat_ptr(arg), uifr, sizeof(struct ifreq32)))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int dev_ifconf(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct ifconf32 ifc32;
-	struct ifconf ifc;
-	struct ifconf __user *uifc;
-	struct ifreq32 __user *ifr32;
-	struct ifreq __user *ifr;
-	unsigned int i, j;
-	int err;
-
-	if (copy_from_user(&ifc32, compat_ptr(arg), sizeof(struct ifconf32)))
-		return -EFAULT;
-
-	if (ifc32.ifcbuf == 0) {
-		ifc32.ifc_len = 0;
-		ifc.ifc_len = 0;
-		ifc.ifc_req = NULL;
-		uifc = compat_alloc_user_space(sizeof(struct ifconf));
-	} else {
-		size_t len =((ifc32.ifc_len / sizeof (struct ifreq32)) + 1) *
-			sizeof (struct ifreq);
-		uifc = compat_alloc_user_space(sizeof(struct ifconf) + len);
-		ifc.ifc_len = len;
-		ifr = ifc.ifc_req = (void __user *)(uifc + 1);
-		ifr32 = compat_ptr(ifc32.ifcbuf);
-		for (i = 0; i < ifc32.ifc_len; i += sizeof (struct ifreq32)) {
-			if (copy_in_user(ifr, ifr32, sizeof(struct ifreq32)))
-				return -EFAULT;
-			ifr++;
-			ifr32++; 
-		}
-	}
-	if (copy_to_user(uifc, &ifc, sizeof(struct ifconf)))
-		return -EFAULT;
-
-	err = sys_ioctl (fd, SIOCGIFCONF, (unsigned long)uifc);	
-	if (err)
-		return err;
-
-	if (copy_from_user(&ifc, uifc, sizeof(struct ifconf))) 
-		return -EFAULT;
-
-	ifr = ifc.ifc_req;
-	ifr32 = compat_ptr(ifc32.ifcbuf);
-	for (i = 0, j = 0;
-             i + sizeof (struct ifreq32) <= ifc32.ifc_len && j < ifc.ifc_len;
-	     i += sizeof (struct ifreq32), j += sizeof (struct ifreq)) {
-		if (copy_in_user(ifr32, ifr, sizeof (struct ifreq32)))
-			return -EFAULT;
-		ifr32++;
-		ifr++;
-	}
-
-	if (ifc32.ifcbuf == 0) {
-		/* Translate from 64-bit structure multiple to
-		 * a 32-bit one.
-		 */
-		i = ifc.ifc_len;
-		i = ((i / sizeof(struct ifreq)) * sizeof(struct ifreq32));
-		ifc32.ifc_len = i;
-	} else {
-		ifc32.ifc_len = i;
-	}
-	if (copy_to_user(compat_ptr(arg), &ifc32, sizeof(struct ifconf32)))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int ethtool_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct ifreq __user *ifr;
-	struct ifreq32 __user *ifr32;
-	u32 data;
-	void __user *datap;
-	
-	ifr = compat_alloc_user_space(sizeof(*ifr));
-	ifr32 = compat_ptr(arg);
-
-	if (copy_in_user(&ifr->ifr_name, &ifr32->ifr_name, IFNAMSIZ))
-		return -EFAULT;
-
-	if (get_user(data, &ifr32->ifr_ifru.ifru_data))
-		return -EFAULT;
-
-	datap = compat_ptr(data);
-	if (put_user(datap, &ifr->ifr_ifru.ifru_data))
-		return -EFAULT;
-
-	return sys_ioctl(fd, cmd, (unsigned long) ifr);
-}
-
-static int bond_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct ifreq kifr;
-	struct ifreq __user *uifr;
-	struct ifreq32 __user *ifr32 = compat_ptr(arg);
-	mm_segment_t old_fs;
-	int err;
-	u32 data;
-	void __user *datap;
-
-	switch (cmd) {
-	case SIOCBONDENSLAVE:
-	case SIOCBONDRELEASE:
-	case SIOCBONDSETHWADDR:
-	case SIOCBONDCHANGEACTIVE:
-		if (copy_from_user(&kifr, ifr32, sizeof(struct ifreq32)))
-			return -EFAULT;
-
-		old_fs = get_fs();
-		set_fs (KERNEL_DS);
-		err = sys_ioctl (fd, cmd, (unsigned long)&kifr);
-		set_fs (old_fs);
-
-		return err;
-	case SIOCBONDSLAVEINFOQUERY:
-	case SIOCBONDINFOQUERY:
-		uifr = compat_alloc_user_space(sizeof(*uifr));
-		if (copy_in_user(&uifr->ifr_name, &ifr32->ifr_name, IFNAMSIZ))
-			return -EFAULT;
-
-		if (get_user(data, &ifr32->ifr_ifru.ifru_data))
-			return -EFAULT;
-
-		datap = compat_ptr(data);
-		if (put_user(datap, &uifr->ifr_ifru.ifru_data))
-			return -EFAULT;
-
-		return sys_ioctl (fd, cmd, (unsigned long)uifr);
-	default:
-		return -EINVAL;
-	};
-}
-
-static int siocdevprivate_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct ifreq __user *u_ifreq64;
-	struct ifreq32 __user *u_ifreq32 = compat_ptr(arg);
-	char tmp_buf[IFNAMSIZ];
-	void __user *data64;
-	u32 data32;
-
-	if (copy_from_user(&tmp_buf[0], &(u_ifreq32->ifr_ifrn.ifrn_name[0]),
-			   IFNAMSIZ))
-		return -EFAULT;
-	if (__get_user(data32, &u_ifreq32->ifr_ifru.ifru_data))
-		return -EFAULT;
-	data64 = compat_ptr(data32);
-
-	u_ifreq64 = compat_alloc_user_space(sizeof(*u_ifreq64));
-
-	/* Don't check these user accesses, just let that get trapped
-	 * in the ioctl handler instead.
-	 */
-	if (copy_to_user(&u_ifreq64->ifr_ifrn.ifrn_name[0], &tmp_buf[0],
-			 IFNAMSIZ))
-		return -EFAULT;
-	if (__put_user(data64, &u_ifreq64->ifr_ifru.ifru_data))
-		return -EFAULT;
-
-	return sys_ioctl(fd, cmd, (unsigned long) u_ifreq64);
-}
-
-static int dev_ifsioc(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct ifreq ifr;
-	struct ifreq32 __user *uifr32;
-	struct ifmap32 __user *uifmap32;
-	mm_segment_t old_fs;
-	int err;
-	
-	uifr32 = compat_ptr(arg);
-	uifmap32 = &uifr32->ifr_ifru.ifru_map;
-	switch (cmd) {
-	case SIOCSIFMAP:
-		err = copy_from_user(&ifr, uifr32, sizeof(ifr.ifr_name));
-		err |= __get_user(ifr.ifr_map.mem_start, &uifmap32->mem_start);
-		err |= __get_user(ifr.ifr_map.mem_end, &uifmap32->mem_end);
-		err |= __get_user(ifr.ifr_map.base_addr, &uifmap32->base_addr);
-		err |= __get_user(ifr.ifr_map.irq, &uifmap32->irq);
-		err |= __get_user(ifr.ifr_map.dma, &uifmap32->dma);
-		err |= __get_user(ifr.ifr_map.port, &uifmap32->port);
-		if (err)
-			return -EFAULT;
-		break;
-	case SIOCSHWTSTAMP:
-		if (copy_from_user(&ifr, uifr32, sizeof(*uifr32)))
-			return -EFAULT;
-		ifr.ifr_data = compat_ptr(uifr32->ifr_ifru.ifru_data);
-		break;
-	default:
-		if (copy_from_user(&ifr, uifr32, sizeof(*uifr32)))
-			return -EFAULT;
-		break;
-	}
-	old_fs = get_fs();
-	set_fs (KERNEL_DS);
-	err = sys_ioctl (fd, cmd, (unsigned long)&ifr);
-	set_fs (old_fs);
-	if (!err) {
-		switch (cmd) {
-		/* TUNSETIFF is defined as _IOW, it should be _IORW
-		 * as the data is copied back to user space, but that
-		 * cannot be fixed without breaking all existing apps.
-		 */
-		case TUNSETIFF:
-		case TUNGETIFF:
-		case SIOCGIFFLAGS:
-		case SIOCGIFMETRIC:
-		case SIOCGIFMTU:
-		case SIOCGIFMEM:
-		case SIOCGIFHWADDR:
-		case SIOCGIFINDEX:
-		case SIOCGIFADDR:
-		case SIOCGIFBRDADDR:
-		case SIOCGIFDSTADDR:
-		case SIOCGIFNETMASK:
-		case SIOCGIFTXQLEN:
-			if (copy_to_user(uifr32, &ifr, sizeof(*uifr32)))
-				return -EFAULT;
-			break;
-		case SIOCGIFMAP:
-			err = copy_to_user(uifr32, &ifr, sizeof(ifr.ifr_name));
-			err |= __put_user(ifr.ifr_map.mem_start, &uifmap32->mem_start);
-			err |= __put_user(ifr.ifr_map.mem_end, &uifmap32->mem_end);
-			err |= __put_user(ifr.ifr_map.base_addr, &uifmap32->base_addr);
-			err |= __put_user(ifr.ifr_map.irq, &uifmap32->irq);
-			err |= __put_user(ifr.ifr_map.dma, &uifmap32->dma);
-			err |= __put_user(ifr.ifr_map.port, &uifmap32->port);
-			if (err)
-				err = -EFAULT;
-			break;
-		}
-	}
-	return err;
-}
-
-struct rtentry32 {
-        u32   		rt_pad1;
-        struct sockaddr rt_dst;         /* target address               */
-        struct sockaddr rt_gateway;     /* gateway addr (RTF_GATEWAY)   */
-        struct sockaddr rt_genmask;     /* target network mask (IP)     */
-        unsigned short  rt_flags;
-        short           rt_pad2;
-        u32   		rt_pad3;
-        unsigned char   rt_tos;
-        unsigned char   rt_class;
-        short           rt_pad4;
-        short           rt_metric;      /* +1 for binary compatibility! */
-        /* char * */ u32 rt_dev;        /* forcing the device at add    */
-        u32   		rt_mtu;         /* per route MTU/Window         */
-        u32   		rt_window;      /* Window clamping              */
-        unsigned short  rt_irtt;        /* Initial RTT                  */
-
-};
-
-struct in6_rtmsg32 {
-	struct in6_addr		rtmsg_dst;
-	struct in6_addr		rtmsg_src;
-	struct in6_addr		rtmsg_gateway;
-	u32			rtmsg_type;
-	u16			rtmsg_dst_len;
-	u16			rtmsg_src_len;
-	u32			rtmsg_metric;
-	u32			rtmsg_info;
-	u32			rtmsg_flags;
-	s32			rtmsg_ifindex;
-};
-
-static int routing_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	int ret;
-	void *r = NULL;
-	struct in6_rtmsg r6;
-	struct rtentry r4;
-	char devname[16];
-	u32 rtdev;
-	mm_segment_t old_fs = get_fs();
-	
-	struct socket *mysock = sockfd_lookup(fd, &ret);
-
-	if (mysock && mysock->sk && mysock->sk->sk_family == AF_INET6) { /* ipv6 */
-		struct in6_rtmsg32 __user *ur6 = compat_ptr(arg);
-		ret = copy_from_user (&r6.rtmsg_dst, &(ur6->rtmsg_dst),
-			3 * sizeof(struct in6_addr));
-		ret |= __get_user (r6.rtmsg_type, &(ur6->rtmsg_type));
-		ret |= __get_user (r6.rtmsg_dst_len, &(ur6->rtmsg_dst_len));
-		ret |= __get_user (r6.rtmsg_src_len, &(ur6->rtmsg_src_len));
-		ret |= __get_user (r6.rtmsg_metric, &(ur6->rtmsg_metric));
-		ret |= __get_user (r6.rtmsg_info, &(ur6->rtmsg_info));
-		ret |= __get_user (r6.rtmsg_flags, &(ur6->rtmsg_flags));
-		ret |= __get_user (r6.rtmsg_ifindex, &(ur6->rtmsg_ifindex));
-		
-		r = (void *) &r6;
-	} else { /* ipv4 */
-		struct rtentry32 __user *ur4 = compat_ptr(arg);
-		ret = copy_from_user (&r4.rt_dst, &(ur4->rt_dst),
-					3 * sizeof(struct sockaddr));
-		ret |= __get_user (r4.rt_flags, &(ur4->rt_flags));
-		ret |= __get_user (r4.rt_metric, &(ur4->rt_metric));
-		ret |= __get_user (r4.rt_mtu, &(ur4->rt_mtu));
-		ret |= __get_user (r4.rt_window, &(ur4->rt_window));
-		ret |= __get_user (r4.rt_irtt, &(ur4->rt_irtt));
-		ret |= __get_user (rtdev, &(ur4->rt_dev));
-		if (rtdev) {
-			ret |= copy_from_user (devname, compat_ptr(rtdev), 15);
-			r4.rt_dev = devname; devname[15] = 0;
-		} else
-			r4.rt_dev = NULL;
-
-		r = (void *) &r4;
-	}
-
-	if (ret) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	set_fs (KERNEL_DS);
-	ret = sys_ioctl (fd, cmd, (unsigned long) r);
-	set_fs (old_fs);
-
-out:
-	if (mysock)
-		sockfd_put(mysock);
-
-	return ret;
-}
-#endif
-
 #ifdef CONFIG_BLOCK
 typedef struct sg_io_hdr32 {
 	compat_int_t interface_id;	/* [i] 'S' for SCSI generic (required) */
@@ -1212,170 +790,6 @@
 	return err;
 }
 
-struct atmif_sioc32 {
-        compat_int_t	number;
-        compat_int_t	length;
-        compat_caddr_t	arg;
-};
-
-struct atm_iobuf32 {
-	compat_int_t	length;
-	compat_caddr_t	buffer;
-};
-
-#define ATM_GETLINKRATE32 _IOW('a', ATMIOC_ITF+1, struct atmif_sioc32)
-#define ATM_GETNAMES32    _IOW('a', ATMIOC_ITF+3, struct atm_iobuf32)
-#define ATM_GETTYPE32     _IOW('a', ATMIOC_ITF+4, struct atmif_sioc32)
-#define ATM_GETESI32	  _IOW('a', ATMIOC_ITF+5, struct atmif_sioc32)
-#define ATM_GETADDR32	  _IOW('a', ATMIOC_ITF+6, struct atmif_sioc32)
-#define ATM_RSTADDR32	  _IOW('a', ATMIOC_ITF+7, struct atmif_sioc32)
-#define ATM_ADDADDR32	  _IOW('a', ATMIOC_ITF+8, struct atmif_sioc32)
-#define ATM_DELADDR32	  _IOW('a', ATMIOC_ITF+9, struct atmif_sioc32)
-#define ATM_GETCIRANGE32  _IOW('a', ATMIOC_ITF+10, struct atmif_sioc32)
-#define ATM_SETCIRANGE32  _IOW('a', ATMIOC_ITF+11, struct atmif_sioc32)
-#define ATM_SETESI32      _IOW('a', ATMIOC_ITF+12, struct atmif_sioc32)
-#define ATM_SETESIF32     _IOW('a', ATMIOC_ITF+13, struct atmif_sioc32)
-#define ATM_GETSTAT32     _IOW('a', ATMIOC_SARCOM+0, struct atmif_sioc32)
-#define ATM_GETSTATZ32    _IOW('a', ATMIOC_SARCOM+1, struct atmif_sioc32)
-#define ATM_GETLOOP32	  _IOW('a', ATMIOC_SARCOM+2, struct atmif_sioc32)
-#define ATM_SETLOOP32	  _IOW('a', ATMIOC_SARCOM+3, struct atmif_sioc32)
-#define ATM_QUERYLOOP32	  _IOW('a', ATMIOC_SARCOM+4, struct atmif_sioc32)
-
-static struct {
-        unsigned int cmd32;
-        unsigned int cmd;
-} atm_ioctl_map[] = {
-        { ATM_GETLINKRATE32, ATM_GETLINKRATE },
-	{ ATM_GETNAMES32,    ATM_GETNAMES },
-        { ATM_GETTYPE32,     ATM_GETTYPE },
-        { ATM_GETESI32,      ATM_GETESI },
-        { ATM_GETADDR32,     ATM_GETADDR },
-        { ATM_RSTADDR32,     ATM_RSTADDR },
-        { ATM_ADDADDR32,     ATM_ADDADDR },
-        { ATM_DELADDR32,     ATM_DELADDR },
-        { ATM_GETCIRANGE32,  ATM_GETCIRANGE },
-	{ ATM_SETCIRANGE32,  ATM_SETCIRANGE },
-	{ ATM_SETESI32,      ATM_SETESI },
-	{ ATM_SETESIF32,     ATM_SETESIF },
-	{ ATM_GETSTAT32,     ATM_GETSTAT },
-	{ ATM_GETSTATZ32,    ATM_GETSTATZ },
-	{ ATM_GETLOOP32,     ATM_GETLOOP },
-	{ ATM_SETLOOP32,     ATM_SETLOOP },
-	{ ATM_QUERYLOOP32,   ATM_QUERYLOOP }
-};
-
-#define NR_ATM_IOCTL ARRAY_SIZE(atm_ioctl_map)
-
-static int do_atm_iobuf(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	struct atm_iobuf   __user *iobuf;
-	struct atm_iobuf32 __user *iobuf32;
-	u32 data;
-	void __user *datap;
-	int len, err;
-
-	iobuf = compat_alloc_user_space(sizeof(*iobuf));
-	iobuf32 = compat_ptr(arg);
-
-	if (get_user(len, &iobuf32->length) ||
-	    get_user(data, &iobuf32->buffer))
-		return -EFAULT;
-	datap = compat_ptr(data);
-	if (put_user(len, &iobuf->length) ||
-	    put_user(datap, &iobuf->buffer))
-		return -EFAULT;
-
-	err = sys_ioctl(fd, cmd, (unsigned long)iobuf);
-
-	if (!err) {
-		if (copy_in_user(&iobuf32->length, &iobuf->length,
-				 sizeof(int)))
-			err = -EFAULT;
-	}
-
-	return err;
-}
-
-static int do_atmif_sioc(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-        struct atmif_sioc   __user *sioc;
-	struct atmif_sioc32 __user *sioc32;
-	u32 data;
-	void __user *datap;
-	int err;
-        
-	sioc = compat_alloc_user_space(sizeof(*sioc));
-	sioc32 = compat_ptr(arg);
-
-	if (copy_in_user(&sioc->number, &sioc32->number, 2 * sizeof(int)) ||
-	    get_user(data, &sioc32->arg))
-		return -EFAULT;
-	datap = compat_ptr(data);
-	if (put_user(datap, &sioc->arg))
-		return -EFAULT;
-
-	err = sys_ioctl(fd, cmd, (unsigned long) sioc);
-
-	if (!err) {
-		if (copy_in_user(&sioc32->length, &sioc->length,
-				 sizeof(int)))
-			err = -EFAULT;
-	}
-	return err;
-}
-
-static int do_atm_ioctl(unsigned int fd, unsigned int cmd32, unsigned long arg)
-{
-        int i;
-        unsigned int cmd = 0;
-        
-	switch (cmd32) {
-	case SONET_GETSTAT:
-	case SONET_GETSTATZ:
-	case SONET_GETDIAG:
-	case SONET_SETDIAG:
-	case SONET_CLRDIAG:
-	case SONET_SETFRAMING:
-	case SONET_GETFRAMING:
-	case SONET_GETFRSENSE:
-		return do_atmif_sioc(fd, cmd32, arg);
-	}
-
-	for (i = 0; i < NR_ATM_IOCTL; i++) {
-		if (cmd32 == atm_ioctl_map[i].cmd32) {
-			cmd = atm_ioctl_map[i].cmd;
-			break;
-		}
-	}
-	if (i == NR_ATM_IOCTL)
-	        return -EINVAL;
-        
-        switch (cmd) {
-	case ATM_GETNAMES:
-		return do_atm_iobuf(fd, cmd, arg);
-	    
-	case ATM_GETLINKRATE:
-        case ATM_GETTYPE:
-        case ATM_GETESI:
-        case ATM_GETADDR:
-        case ATM_RSTADDR:
-        case ATM_ADDADDR:
-        case ATM_DELADDR:
-        case ATM_GETCIRANGE:
-	case ATM_SETCIRANGE:
-	case ATM_SETESI:
-	case ATM_SETESIF:
-	case ATM_GETSTAT:
-	case ATM_GETSTATZ:
-	case ATM_GETLOOP:
-	case ATM_SETLOOP:
-	case ATM_QUERYLOOP:
-                return do_atmif_sioc(fd, cmd, arg);
-        }
-
-        return -EINVAL;
-}
-
 static __used int
 ret_einval(unsigned int fd, unsigned int cmd, unsigned long arg)
 {
@@ -1718,21 +1132,6 @@
 	return sys_ioctl(fd, cmd, (unsigned long)tdata);
 }
 
-/* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
- * for some operations; this forces use of the newer bridge-utils that
- * use compatible ioctls
- */
-static int old_bridge_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	u32 tmp;
-
-	if (get_user(tmp, (u32 __user *) arg))
-		return -EFAULT;
-	if (tmp == BRCTL_GET_VERSION)
-		return BRCTL_VERSION + 1;
-	return -EINVAL;
-}
-
 #define RTC_IRQP_READ32		_IOR('p', 0x0b, compat_ulong_t)
 #define RTC_IRQP_SET32		_IOW('p', 0x0c, compat_ulong_t)
 #define RTC_EPOCH_READ32	_IOR('p', 0x0d, compat_ulong_t)
@@ -1979,18 +1378,6 @@
 COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
 COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
 #endif
-/* Big T */
-COMPATIBLE_IOCTL(TUNSETNOCSUM)
-COMPATIBLE_IOCTL(TUNSETDEBUG)
-COMPATIBLE_IOCTL(TUNSETPERSIST)
-COMPATIBLE_IOCTL(TUNSETOWNER)
-COMPATIBLE_IOCTL(TUNSETLINK)
-COMPATIBLE_IOCTL(TUNSETGROUP)
-COMPATIBLE_IOCTL(TUNGETFEATURES)
-COMPATIBLE_IOCTL(TUNSETOFFLOAD)
-COMPATIBLE_IOCTL(TUNSETTXFILTER)
-COMPATIBLE_IOCTL(TUNGETSNDBUF)
-COMPATIBLE_IOCTL(TUNSETSNDBUF)
 /* Big V */
 COMPATIBLE_IOCTL(VT_SETMODE)
 COMPATIBLE_IOCTL(VT_GETMODE)
@@ -2032,30 +1419,6 @@
 COMPATIBLE_IOCTL(MTIOCTOP)
 /* Socket level stuff */
 COMPATIBLE_IOCTL(FIOQSIZE)
-COMPATIBLE_IOCTL(FIOSETOWN)
-COMPATIBLE_IOCTL(SIOCSPGRP)
-COMPATIBLE_IOCTL(FIOGETOWN)
-COMPATIBLE_IOCTL(SIOCGPGRP)
-COMPATIBLE_IOCTL(SIOCATMARK)
-COMPATIBLE_IOCTL(SIOCSIFLINK)
-COMPATIBLE_IOCTL(SIOCSIFENCAP)
-COMPATIBLE_IOCTL(SIOCGIFENCAP)
-COMPATIBLE_IOCTL(SIOCSIFNAME)
-COMPATIBLE_IOCTL(SIOCSARP)
-COMPATIBLE_IOCTL(SIOCGARP)
-COMPATIBLE_IOCTL(SIOCDARP)
-COMPATIBLE_IOCTL(SIOCSRARP)
-COMPATIBLE_IOCTL(SIOCGRARP)
-COMPATIBLE_IOCTL(SIOCDRARP)
-COMPATIBLE_IOCTL(SIOCADDDLCI)
-COMPATIBLE_IOCTL(SIOCDELDLCI)
-COMPATIBLE_IOCTL(SIOCGMIIPHY)
-COMPATIBLE_IOCTL(SIOCGMIIREG)
-COMPATIBLE_IOCTL(SIOCSMIIREG)
-COMPATIBLE_IOCTL(SIOCGIFVLAN)
-COMPATIBLE_IOCTL(SIOCSIFVLAN)
-COMPATIBLE_IOCTL(SIOCBRADDBR)
-COMPATIBLE_IOCTL(SIOCBRDELBR)
 #ifdef CONFIG_BLOCK
 /* SG stuff */
 COMPATIBLE_IOCTL(SG_SET_TIMEOUT)
@@ -2311,22 +1674,6 @@
 COMPATIBLE_IOCTL(RAW_GETBIND)
 /* SMB ioctls which do not need any translations */
 COMPATIBLE_IOCTL(SMB_IOC_NEWCONN)
-/* Little a */
-COMPATIBLE_IOCTL(ATMSIGD_CTRL)
-COMPATIBLE_IOCTL(ATMARPD_CTRL)
-COMPATIBLE_IOCTL(ATMLEC_CTRL)
-COMPATIBLE_IOCTL(ATMLEC_MCAST)
-COMPATIBLE_IOCTL(ATMLEC_DATA)
-COMPATIBLE_IOCTL(ATM_SETSC)
-COMPATIBLE_IOCTL(SIOCSIFATMTCP)
-COMPATIBLE_IOCTL(SIOCMKCLIP)
-COMPATIBLE_IOCTL(ATMARP_MKIP)
-COMPATIBLE_IOCTL(ATMARP_SETENTRY)
-COMPATIBLE_IOCTL(ATMARP_ENCAP)
-COMPATIBLE_IOCTL(ATMTCP_CREATE)
-COMPATIBLE_IOCTL(ATMTCP_REMOVE)
-COMPATIBLE_IOCTL(ATMMPC_CTRL)
-COMPATIBLE_IOCTL(ATMMPC_DATA)
 /* Watchdog */
 COMPATIBLE_IOCTL(WDIOC_GETSUPPORT)
 COMPATIBLE_IOCTL(WDIOC_GETSTATUS)
@@ -2532,63 +1879,6 @@
 COMPATIBLE_IOCTL(JSIOCGNAME(0))
 
 /* now things that need handlers */
-#ifdef CONFIG_NET
-HANDLE_IOCTL(SIOCGIFNAME, dev_ifname32)
-HANDLE_IOCTL(SIOCGIFCONF, dev_ifconf)
-HANDLE_IOCTL(SIOCGIFFLAGS, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFFLAGS, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFMETRIC, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFMETRIC, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFMTU, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFMTU, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFMEM, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFMEM, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFHWADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFHWADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCADDMULTI, dev_ifsioc)
-HANDLE_IOCTL(SIOCDELMULTI, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFINDEX, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFMAP, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFMAP, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFHWBROADCAST, dev_ifsioc)
-HANDLE_IOCTL(SIOCSHWTSTAMP, dev_ifsioc)
-
-/* ioctls used by appletalk ddp.c */
-HANDLE_IOCTL(SIOCATALKDIFADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCDIFADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCSARP, dev_ifsioc)
-HANDLE_IOCTL(SIOCDARP, dev_ifsioc)
-
-HANDLE_IOCTL(SIOCGIFBRDADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFBRDADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFDSTADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFDSTADDR, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFNETMASK, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFNETMASK, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFPFLAGS, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFPFLAGS, dev_ifsioc)
-HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc)
-HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc)
-HANDLE_IOCTL(TUNSETIFF, dev_ifsioc)
-HANDLE_IOCTL(TUNGETIFF, dev_ifsioc)
-HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl)
-HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl)
-HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl)
-HANDLE_IOCTL(SIOCBONDSETHWADDR, bond_ioctl)
-HANDLE_IOCTL(SIOCBONDSLAVEINFOQUERY, bond_ioctl)
-HANDLE_IOCTL(SIOCBONDINFOQUERY, bond_ioctl)
-HANDLE_IOCTL(SIOCBONDCHANGEACTIVE, bond_ioctl)
-HANDLE_IOCTL(SIOCADDRT, routing_ioctl)
-HANDLE_IOCTL(SIOCDELRT, routing_ioctl)
-HANDLE_IOCTL(SIOCBRADDIF, dev_ifsioc)
-HANDLE_IOCTL(SIOCBRDELIF, dev_ifsioc)
-/* Note SIOCRTMSG is no longer, so this is safe and * the user would have seen just an -EINVAL anyways. */
-HANDLE_IOCTL(SIOCRTMSG, ret_einval)
-HANDLE_IOCTL(SIOCGSTAMP, do_siocgstamp)
-HANDLE_IOCTL(SIOCGSTAMPNS, do_siocgstampns)
-#endif
 #ifdef CONFIG_BLOCK
 HANDLE_IOCTL(SG_IO,sg_ioctl_trans)
 HANDLE_IOCTL(SG_GET_REQUEST_TABLE, sg_grt_trans)
@@ -2613,31 +1903,6 @@
 /* One SMB ioctl needs translations. */
 #define SMB_IOC_GETMOUNTUID_32 _IOR('u', 1, compat_uid_t)
 HANDLE_IOCTL(SMB_IOC_GETMOUNTUID_32, do_smb_getmountuid)
-HANDLE_IOCTL(ATM_GETLINKRATE32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETNAMES32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETTYPE32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETESI32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETADDR32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_RSTADDR32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_ADDADDR32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_DELADDR32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETCIRANGE32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_SETCIRANGE32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_SETESI32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_SETESIF32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETSTAT32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETSTATZ32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_GETLOOP32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_SETLOOP32, do_atm_ioctl)
-HANDLE_IOCTL(ATM_QUERYLOOP32, do_atm_ioctl)
-HANDLE_IOCTL(SONET_GETSTAT, do_atm_ioctl)
-HANDLE_IOCTL(SONET_GETSTATZ, do_atm_ioctl)
-HANDLE_IOCTL(SONET_GETDIAG, do_atm_ioctl)
-HANDLE_IOCTL(SONET_SETDIAG, do_atm_ioctl)
-HANDLE_IOCTL(SONET_CLRDIAG, do_atm_ioctl)
-HANDLE_IOCTL(SONET_SETFRAMING, do_atm_ioctl)
-HANDLE_IOCTL(SONET_GETFRAMING, do_atm_ioctl)
-HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
 /* block stuff */
 #ifdef CONFIG_BLOCK
 /* loop */
@@ -2672,11 +1937,7 @@
 HANDLE_IOCTL(I2C_FUNCS, w_long)
 HANDLE_IOCTL(I2C_RDWR, do_i2c_rdwr_ioctl)
 HANDLE_IOCTL(I2C_SMBUS, do_i2c_smbus_ioctl)
-/* bridge */
-HANDLE_IOCTL(SIOCSIFBR, old_bridge_ioctl)
-HANDLE_IOCTL(SIOCGIFBR, old_bridge_ioctl)
 /* Not implemented in the native kernel */
-IGNORE_IOCTL(SIOCGIFCOUNT)
 HANDLE_IOCTL(RTC_IRQP_READ32, rtc_ioctl)
 HANDLE_IOCTL(RTC_IRQP_SET32, rtc_ioctl)
 HANDLE_IOCTL(RTC_EPOCH_READ32, rtc_ioctl)
@@ -2831,12 +2092,6 @@
 			goto found_handler;
 	}
 
-#ifdef CONFIG_NET
-	if (S_ISSOCK(filp->f_path.dentry->d_inode->i_mode) &&
-	    cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
-		error = siocdevprivate_ioctl(fd, cmd, arg);
-	} else
-#endif
 	{
 		static int count;
 
diff --git a/fs/direct-io.c b/fs/direct-io.c
index 8b10b87..b912270 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -1028,9 +1028,6 @@
 	if (dio->bio)
 		dio_bio_submit(dio);
 
-	/* All IO is now issued, send it on its way */
-	blk_run_address_space(inode->i_mapping);
-
 	/*
 	 * It is possible that, we return short IO due to end of file.
 	 * In that case, we need to release all the pages we got hold on.
@@ -1057,8 +1054,11 @@
 	    ((rw & READ) || (dio->result == dio->size)))
 		ret = -EIOCBQUEUED;
 
-	if (ret != -EIOCBQUEUED)
+	if (ret != -EIOCBQUEUED) {
+		/* All IO is now issued, send it on its way */
+		blk_run_address_space(inode->i_mapping);
 		dio_await_completion(dio);
+	}
 
 	/*
 	 * Sync will always be dropping the final ref and completing the
@@ -1124,7 +1124,7 @@
 	int acquire_i_mutex = 0;
 
 	if (rw & WRITE)
-		rw = WRITE_ODIRECT;
+		rw = WRITE_ODIRECT_PLUG;
 
 	if (bdev)
 		bdev_blkbits = blksize_bits(bdev_logical_block_size(bdev));
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 085c5c0..366c503 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -251,10 +251,10 @@
 		.data		= &max_user_watches,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif /* CONFIG_SYSCTL */
 
diff --git a/fs/exec.c b/fs/exec.c
index ba112bd..c0c636e 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -46,7 +46,6 @@
 #include <linux/proc_fs.h>
 #include <linux/mount.h>
 #include <linux/security.h>
-#include <linux/ima.h>
 #include <linux/syscalls.h>
 #include <linux/tsacct_kern.h>
 #include <linux/cn_proc.h>
@@ -1209,9 +1208,6 @@
 	retval = security_bprm_check(bprm);
 	if (retval)
 		return retval;
-	retval = ima_bprm_check(bprm);
-	if (retval)
-		return retval;
 
 	/* kernel module loader fixup */
 	/* so we don't try to load run modprobe in kernel space. */
diff --git a/fs/file_table.c b/fs/file_table.c
index 8eb4404..4bef4c0 100644
--- a/fs/file_table.c
+++ b/fs/file_table.c
@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/security.h>
-#include <linux/ima.h>
 #include <linux/eventpoll.h>
 #include <linux/rcupdate.h>
 #include <linux/mount.h>
@@ -280,7 +279,6 @@
 	if (file->f_op && file->f_op->release)
 		file->f_op->release(inode, file);
 	security_file_free(file);
-	ima_file_free(file);
 	if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL))
 		cdev_put(inode->i_cdev);
 	fops_put(file->f_op);
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 9d5360c..49bc1b8 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -614,7 +614,6 @@
 				struct writeback_control *wbc)
 {
 	struct super_block *sb = wbc->sb, *pin_sb = NULL;
-	const int is_blkdev_sb = sb_is_blkdev_sb(sb);
 	const unsigned long start = jiffies;	/* livelock avoidance */
 
 	spin_lock(&inode_lock);
@@ -635,36 +634,11 @@
 			continue;
 		}
 
-		if (!bdi_cap_writeback_dirty(wb->bdi)) {
-			redirty_tail(inode);
-			if (is_blkdev_sb) {
-				/*
-				 * Dirty memory-backed blockdev: the ramdisk
-				 * driver does this.  Skip just this inode
-				 */
-				continue;
-			}
-			/*
-			 * Dirty memory-backed inode against a filesystem other
-			 * than the kernel-internal bdev filesystem.  Skip the
-			 * entire superblock.
-			 */
-			break;
-		}
-
 		if (inode->i_state & (I_NEW | I_WILL_FREE)) {
 			requeue_io(inode);
 			continue;
 		}
 
-		if (wbc->nonblocking && bdi_write_congested(wb->bdi)) {
-			wbc->encountered_congestion = 1;
-			if (!is_blkdev_sb)
-				break;		/* Skip a congested fs */
-			requeue_io(inode);
-			continue;		/* Skip a congested blockdev */
-		}
-
 		/*
 		 * Was this inode dirtied after sync_sb_inodes was called?
 		 * This keeps sync from extra jobs and livelock.
@@ -756,6 +730,7 @@
 		.sync_mode		= args->sync_mode,
 		.older_than_this	= NULL,
 		.for_kupdate		= args->for_kupdate,
+		.for_background		= args->for_background,
 		.range_cyclic		= args->range_cyclic,
 	};
 	unsigned long oldest_jif;
@@ -787,7 +762,6 @@
 			break;
 
 		wbc.more_io = 0;
-		wbc.encountered_congestion = 0;
 		wbc.nr_to_write = MAX_WRITEBACK_PAGES;
 		wbc.pages_skipped = 0;
 		writeback_inodes_wb(wb, &wbc);
diff --git a/fs/fscache/Kconfig b/fs/fscache/Kconfig
index 9bbb8ce..864dac2 100644
--- a/fs/fscache/Kconfig
+++ b/fs/fscache/Kconfig
@@ -54,3 +54,10 @@
 	  enabled by setting bits in /sys/modules/fscache/parameter/debug.
 
 	  See Documentation/filesystems/caching/fscache.txt for more information.
+
+config FSCACHE_OBJECT_LIST
+	bool "Maintain global object list for debugging purposes"
+	depends on FSCACHE && PROC_FS
+	help
+	  Maintain a global list of active fscache objects that can be
+	  retrieved through /proc/fs/fscache/objects for debugging purposes
diff --git a/fs/fscache/Makefile b/fs/fscache/Makefile
index 91571b9..6d56153 100644
--- a/fs/fscache/Makefile
+++ b/fs/fscache/Makefile
@@ -15,5 +15,6 @@
 fscache-$(CONFIG_PROC_FS) += proc.o
 fscache-$(CONFIG_FSCACHE_STATS) += stats.o
 fscache-$(CONFIG_FSCACHE_HISTOGRAM) += histogram.o
+fscache-$(CONFIG_FSCACHE_OBJECT_LIST) += object-list.o
 
 obj-$(CONFIG_FSCACHE) := fscache.o
diff --git a/fs/fscache/cache.c b/fs/fscache/cache.c
index e21985b..6a3c48a 100644
--- a/fs/fscache/cache.c
+++ b/fs/fscache/cache.c
@@ -263,6 +263,7 @@
 	spin_lock(&cache->object_list_lock);
 	list_add_tail(&ifsdef->cache_link, &cache->object_list);
 	spin_unlock(&cache->object_list_lock);
+	fscache_objlist_add(ifsdef);
 
 	/* add the cache's netfs definition index object to the top level index
 	 * cookie as a known backing object */
@@ -380,11 +381,15 @@
 
 	/* make sure all pages pinned by operations on behalf of the netfs are
 	 * written to disk */
+	fscache_stat(&fscache_n_cop_sync_cache);
 	cache->ops->sync_cache(cache);
+	fscache_stat_d(&fscache_n_cop_sync_cache);
 
 	/* dissociate all the netfs pages backed by this cache from the block
 	 * mappings in the cache */
+	fscache_stat(&fscache_n_cop_dissociate_pages);
 	cache->ops->dissociate_pages(cache);
+	fscache_stat_d(&fscache_n_cop_dissociate_pages);
 
 	/* we now have to destroy all the active objects pertaining to this
 	 * cache - which we do by passing them off to thread pool to be
diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c
index 72fd18f..9905350 100644
--- a/fs/fscache/cookie.c
+++ b/fs/fscache/cookie.c
@@ -36,6 +36,7 @@
 
 	memset(cookie, 0, sizeof(*cookie));
 	spin_lock_init(&cookie->lock);
+	spin_lock_init(&cookie->stores_lock);
 	INIT_HLIST_HEAD(&cookie->backing_objects);
 }
 
@@ -102,7 +103,9 @@
 	cookie->netfs_data	= netfs_data;
 	cookie->flags		= 0;
 
-	INIT_RADIX_TREE(&cookie->stores, GFP_NOFS);
+	/* radix tree insertion won't use the preallocation pool unless it's
+	 * told it may not wait */
+	INIT_RADIX_TREE(&cookie->stores, GFP_NOFS & ~__GFP_WAIT);
 
 	switch (cookie->def->type) {
 	case FSCACHE_COOKIE_TYPE_INDEX:
@@ -249,7 +252,9 @@
 
 	/* ask the cache to allocate an object (we may end up with duplicate
 	 * objects at this stage, but we sort that out later) */
+	fscache_stat(&fscache_n_cop_alloc_object);
 	object = cache->ops->alloc_object(cache, cookie);
+	fscache_stat_d(&fscache_n_cop_alloc_object);
 	if (IS_ERR(object)) {
 		fscache_stat(&fscache_n_object_no_alloc);
 		ret = PTR_ERR(object);
@@ -270,8 +275,11 @@
 	/* only attach if we managed to allocate all we needed, otherwise
 	 * discard the object we just allocated and instead use the one
 	 * attached to the cookie */
-	if (fscache_attach_object(cookie, object) < 0)
+	if (fscache_attach_object(cookie, object) < 0) {
+		fscache_stat(&fscache_n_cop_put_object);
 		cache->ops->put_object(object);
+		fscache_stat_d(&fscache_n_cop_put_object);
+	}
 
 	_leave(" = 0");
 	return 0;
@@ -287,7 +295,9 @@
 	return 0;
 
 error_put:
+	fscache_stat(&fscache_n_cop_put_object);
 	cache->ops->put_object(object);
+	fscache_stat_d(&fscache_n_cop_put_object);
 error:
 	_leave(" = %d", ret);
 	return ret;
@@ -349,6 +359,8 @@
 	object->cookie = cookie;
 	atomic_inc(&cookie->usage);
 	hlist_add_head(&object->cookie_link, &cookie->backing_objects);
+
+	fscache_objlist_add(object);
 	ret = 0;
 
 cant_attach_object:
@@ -403,6 +415,8 @@
 	unsigned long event;
 
 	fscache_stat(&fscache_n_relinquishes);
+	if (retire)
+		fscache_stat(&fscache_n_relinquishes_retire);
 
 	if (!cookie) {
 		fscache_stat(&fscache_n_relinquishes_null);
@@ -428,12 +442,8 @@
 
 	event = retire ? FSCACHE_OBJECT_EV_RETIRE : FSCACHE_OBJECT_EV_RELEASE;
 
-	/* detach pointers back to the netfs */
 	spin_lock(&cookie->lock);
 
-	cookie->netfs_data	= NULL;
-	cookie->def		= NULL;
-
 	/* break links with all the active objects */
 	while (!hlist_empty(&cookie->backing_objects)) {
 		object = hlist_entry(cookie->backing_objects.first,
@@ -456,6 +466,10 @@
 			BUG();
 	}
 
+	/* detach pointers back to the netfs */
+	cookie->netfs_data	= NULL;
+	cookie->def		= NULL;
+
 	spin_unlock(&cookie->lock);
 
 	if (cookie->parent) {
diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h
index 1c34130..edd7434 100644
--- a/fs/fscache/internal.h
+++ b/fs/fscache/internal.h
@@ -17,6 +17,7 @@
  * - cache->object_list_lock
  * - object->lock
  * - object->parent->lock
+ * - cookie->stores_lock
  * - fscache_thread_lock
  *
  */
@@ -88,17 +89,31 @@
 /*
  * object.c
  */
+extern const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5];
+
 extern void fscache_withdrawing_object(struct fscache_cache *,
 				       struct fscache_object *);
 extern void fscache_enqueue_object(struct fscache_object *);
 
 /*
+ * object-list.c
+ */
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+extern const struct file_operations fscache_objlist_fops;
+
+extern void fscache_objlist_add(struct fscache_object *);
+#else
+#define fscache_objlist_add(object) do {} while(0)
+#endif
+
+/*
  * operation.c
  */
 extern int fscache_submit_exclusive_op(struct fscache_object *,
 				       struct fscache_operation *);
 extern int fscache_submit_op(struct fscache_object *,
 			     struct fscache_operation *);
+extern int fscache_cancel_op(struct fscache_operation *);
 extern void fscache_abort_object(struct fscache_object *);
 extern void fscache_start_operations(struct fscache_object *);
 extern void fscache_operation_gc(struct work_struct *);
@@ -127,6 +142,8 @@
 extern atomic_t fscache_n_op_deferred_release;
 extern atomic_t fscache_n_op_release;
 extern atomic_t fscache_n_op_gc;
+extern atomic_t fscache_n_op_cancelled;
+extern atomic_t fscache_n_op_rejected;
 
 extern atomic_t fscache_n_attr_changed;
 extern atomic_t fscache_n_attr_changed_ok;
@@ -138,6 +155,8 @@
 extern atomic_t fscache_n_allocs_ok;
 extern atomic_t fscache_n_allocs_wait;
 extern atomic_t fscache_n_allocs_nobufs;
+extern atomic_t fscache_n_allocs_intr;
+extern atomic_t fscache_n_allocs_object_dead;
 extern atomic_t fscache_n_alloc_ops;
 extern atomic_t fscache_n_alloc_op_waits;
 
@@ -148,6 +167,7 @@
 extern atomic_t fscache_n_retrievals_nobufs;
 extern atomic_t fscache_n_retrievals_intr;
 extern atomic_t fscache_n_retrievals_nomem;
+extern atomic_t fscache_n_retrievals_object_dead;
 extern atomic_t fscache_n_retrieval_ops;
 extern atomic_t fscache_n_retrieval_op_waits;
 
@@ -158,6 +178,14 @@
 extern atomic_t fscache_n_stores_oom;
 extern atomic_t fscache_n_store_ops;
 extern atomic_t fscache_n_store_calls;
+extern atomic_t fscache_n_store_pages;
+extern atomic_t fscache_n_store_radix_deletes;
+extern atomic_t fscache_n_store_pages_over_limit;
+
+extern atomic_t fscache_n_store_vmscan_not_storing;
+extern atomic_t fscache_n_store_vmscan_gone;
+extern atomic_t fscache_n_store_vmscan_busy;
+extern atomic_t fscache_n_store_vmscan_cancelled;
 
 extern atomic_t fscache_n_marks;
 extern atomic_t fscache_n_uncaches;
@@ -176,6 +204,7 @@
 extern atomic_t fscache_n_relinquishes;
 extern atomic_t fscache_n_relinquishes_null;
 extern atomic_t fscache_n_relinquishes_waitcrt;
+extern atomic_t fscache_n_relinquishes_retire;
 
 extern atomic_t fscache_n_cookie_index;
 extern atomic_t fscache_n_cookie_data;
@@ -186,6 +215,7 @@
 extern atomic_t fscache_n_object_lookups;
 extern atomic_t fscache_n_object_lookups_negative;
 extern atomic_t fscache_n_object_lookups_positive;
+extern atomic_t fscache_n_object_lookups_timed_out;
 extern atomic_t fscache_n_object_created;
 extern atomic_t fscache_n_object_avail;
 extern atomic_t fscache_n_object_dead;
@@ -195,15 +225,41 @@
 extern atomic_t fscache_n_checkaux_update;
 extern atomic_t fscache_n_checkaux_obsolete;
 
+extern atomic_t fscache_n_cop_alloc_object;
+extern atomic_t fscache_n_cop_lookup_object;
+extern atomic_t fscache_n_cop_lookup_complete;
+extern atomic_t fscache_n_cop_grab_object;
+extern atomic_t fscache_n_cop_update_object;
+extern atomic_t fscache_n_cop_drop_object;
+extern atomic_t fscache_n_cop_put_object;
+extern atomic_t fscache_n_cop_sync_cache;
+extern atomic_t fscache_n_cop_attr_changed;
+extern atomic_t fscache_n_cop_read_or_alloc_page;
+extern atomic_t fscache_n_cop_read_or_alloc_pages;
+extern atomic_t fscache_n_cop_allocate_page;
+extern atomic_t fscache_n_cop_allocate_pages;
+extern atomic_t fscache_n_cop_write_page;
+extern atomic_t fscache_n_cop_uncache_page;
+extern atomic_t fscache_n_cop_dissociate_pages;
+
 static inline void fscache_stat(atomic_t *stat)
 {
 	atomic_inc(stat);
 }
 
+static inline void fscache_stat_d(atomic_t *stat)
+{
+	atomic_dec(stat);
+}
+
+#define __fscache_stat(stat) (stat)
+
 extern const struct file_operations fscache_stats_fops;
 #else
 
+#define __fscache_stat(stat) (NULL)
 #define fscache_stat(stat) do {} while (0)
+#define fscache_stat_d(stat) do {} while (0)
 #endif
 
 /*
diff --git a/fs/fscache/main.c b/fs/fscache/main.c
index 4de41b5..add6bdb 100644
--- a/fs/fscache/main.c
+++ b/fs/fscache/main.c
@@ -48,7 +48,7 @@
 {
 	int ret;
 
-	ret = slow_work_register_user();
+	ret = slow_work_register_user(THIS_MODULE);
 	if (ret < 0)
 		goto error_slow_work;
 
@@ -80,7 +80,7 @@
 error_cookie_jar:
 	fscache_proc_cleanup();
 error_proc:
-	slow_work_unregister_user();
+	slow_work_unregister_user(THIS_MODULE);
 error_slow_work:
 	return ret;
 }
@@ -97,7 +97,7 @@
 	kobject_put(fscache_root);
 	kmem_cache_destroy(fscache_cookie_jar);
 	fscache_proc_cleanup();
-	slow_work_unregister_user();
+	slow_work_unregister_user(THIS_MODULE);
 	printk(KERN_NOTICE "FS-Cache: Unloaded\n");
 }
 
diff --git a/fs/fscache/object-list.c b/fs/fscache/object-list.c
new file mode 100644
index 0000000..e590242
--- /dev/null
+++ b/fs/fscache/object-list.c
@@ -0,0 +1,432 @@
+/* Global fscache object list maintainer and viewer
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#define FSCACHE_DEBUG_LEVEL COOKIE
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/key.h>
+#include <keys/user-type.h>
+#include "internal.h"
+
+static struct rb_root fscache_object_list;
+static DEFINE_RWLOCK(fscache_object_list_lock);
+
+struct fscache_objlist_data {
+	unsigned long	config;		/* display configuration */
+#define FSCACHE_OBJLIST_CONFIG_KEY	0x00000001	/* show object keys */
+#define FSCACHE_OBJLIST_CONFIG_AUX	0x00000002	/* show object auxdata */
+#define FSCACHE_OBJLIST_CONFIG_COOKIE	0x00000004	/* show objects with cookies */
+#define FSCACHE_OBJLIST_CONFIG_NOCOOKIE	0x00000008	/* show objects without cookies */
+#define FSCACHE_OBJLIST_CONFIG_BUSY	0x00000010	/* show busy objects */
+#define FSCACHE_OBJLIST_CONFIG_IDLE	0x00000020	/* show idle objects */
+#define FSCACHE_OBJLIST_CONFIG_PENDWR	0x00000040	/* show objects with pending writes */
+#define FSCACHE_OBJLIST_CONFIG_NOPENDWR	0x00000080	/* show objects without pending writes */
+#define FSCACHE_OBJLIST_CONFIG_READS	0x00000100	/* show objects with active reads */
+#define FSCACHE_OBJLIST_CONFIG_NOREADS	0x00000200	/* show objects without active reads */
+#define FSCACHE_OBJLIST_CONFIG_EVENTS	0x00000400	/* show objects with events */
+#define FSCACHE_OBJLIST_CONFIG_NOEVENTS	0x00000800	/* show objects without no events */
+#define FSCACHE_OBJLIST_CONFIG_WORK	0x00001000	/* show objects with slow work */
+#define FSCACHE_OBJLIST_CONFIG_NOWORK	0x00002000	/* show objects without slow work */
+
+	u8		buf[512];	/* key and aux data buffer */
+};
+
+/*
+ * Add an object to the object list
+ * - we use the address of the fscache_object structure as the key into the
+ *   tree
+ */
+void fscache_objlist_add(struct fscache_object *obj)
+{
+	struct fscache_object *xobj;
+	struct rb_node **p = &fscache_object_list.rb_node, *parent = NULL;
+
+	write_lock(&fscache_object_list_lock);
+
+	while (*p) {
+		parent = *p;
+		xobj = rb_entry(parent, struct fscache_object, objlist_link);
+
+		if (obj < xobj)
+			p = &(*p)->rb_left;
+		else if (obj > xobj)
+			p = &(*p)->rb_right;
+		else
+			BUG();
+	}
+
+	rb_link_node(&obj->objlist_link, parent, p);
+	rb_insert_color(&obj->objlist_link, &fscache_object_list);
+
+	write_unlock(&fscache_object_list_lock);
+}
+
+/**
+ * fscache_object_destroy - Note that a cache object is about to be destroyed
+ * @object: The object to be destroyed
+ *
+ * Note the imminent destruction and deallocation of a cache object record.
+ */
+void fscache_object_destroy(struct fscache_object *obj)
+{
+	write_lock(&fscache_object_list_lock);
+
+	BUG_ON(RB_EMPTY_ROOT(&fscache_object_list));
+	rb_erase(&obj->objlist_link, &fscache_object_list);
+
+	write_unlock(&fscache_object_list_lock);
+}
+EXPORT_SYMBOL(fscache_object_destroy);
+
+/*
+ * find the object in the tree on or after the specified index
+ */
+static struct fscache_object *fscache_objlist_lookup(loff_t *_pos)
+{
+	struct fscache_object *pobj, *obj, *minobj = NULL;
+	struct rb_node *p;
+	unsigned long pos;
+
+	if (*_pos >= (unsigned long) ERR_PTR(-ENOENT))
+		return NULL;
+	pos = *_pos;
+
+	/* banners (can't represent line 0 by pos 0 as that would involve
+	 * returning a NULL pointer) */
+	if (pos == 0)
+		return (struct fscache_object *) ++(*_pos);
+	if (pos < 3)
+		return (struct fscache_object *)pos;
+
+	pobj = (struct fscache_object *)pos;
+	p = fscache_object_list.rb_node;
+	while (p) {
+		obj = rb_entry(p, struct fscache_object, objlist_link);
+		if (pobj < obj) {
+			if (!minobj || minobj > obj)
+				minobj = obj;
+			p = p->rb_left;
+		} else if (pobj > obj) {
+			p = p->rb_right;
+		} else {
+			minobj = obj;
+			break;
+		}
+		obj = NULL;
+	}
+
+	if (!minobj)
+		*_pos = (unsigned long) ERR_PTR(-ENOENT);
+	else if (minobj != obj)
+		*_pos = (unsigned long) minobj;
+	return minobj;
+}
+
+/*
+ * set up the iterator to start reading from the first line
+ */
+static void *fscache_objlist_start(struct seq_file *m, loff_t *_pos)
+	__acquires(&fscache_object_list_lock)
+{
+	read_lock(&fscache_object_list_lock);
+	return fscache_objlist_lookup(_pos);
+}
+
+/*
+ * move to the next line
+ */
+static void *fscache_objlist_next(struct seq_file *m, void *v, loff_t *_pos)
+{
+	(*_pos)++;
+	return fscache_objlist_lookup(_pos);
+}
+
+/*
+ * clean up after reading
+ */
+static void fscache_objlist_stop(struct seq_file *m, void *v)
+	__releases(&fscache_object_list_lock)
+{
+	read_unlock(&fscache_object_list_lock);
+}
+
+/*
+ * display an object
+ */
+static int fscache_objlist_show(struct seq_file *m, void *v)
+{
+	struct fscache_objlist_data *data = m->private;
+	struct fscache_object *obj = v;
+	unsigned long config = data->config;
+	uint16_t keylen, auxlen;
+	char _type[3], *type;
+	bool no_cookie;
+	u8 *buf = data->buf, *p;
+
+	if ((unsigned long) v == 1) {
+		seq_puts(m, "OBJECT   PARENT   STAT CHLDN OPS OOP IPR EX READS"
+			 " EM EV F S"
+			 " | NETFS_COOKIE_DEF TY FL NETFS_DATA");
+		if (config & (FSCACHE_OBJLIST_CONFIG_KEY |
+			      FSCACHE_OBJLIST_CONFIG_AUX))
+			seq_puts(m, "       ");
+		if (config & FSCACHE_OBJLIST_CONFIG_KEY)
+			seq_puts(m, "OBJECT_KEY");
+		if ((config & (FSCACHE_OBJLIST_CONFIG_KEY |
+			       FSCACHE_OBJLIST_CONFIG_AUX)) ==
+		    (FSCACHE_OBJLIST_CONFIG_KEY | FSCACHE_OBJLIST_CONFIG_AUX))
+			seq_puts(m, ", ");
+		if (config & FSCACHE_OBJLIST_CONFIG_AUX)
+			seq_puts(m, "AUX_DATA");
+		seq_puts(m, "\n");
+		return 0;
+	}
+
+	if ((unsigned long) v == 2) {
+		seq_puts(m, "======== ======== ==== ===== === === === == ====="
+			 " == == = ="
+			 " | ================ == == ================");
+		if (config & (FSCACHE_OBJLIST_CONFIG_KEY |
+			      FSCACHE_OBJLIST_CONFIG_AUX))
+			seq_puts(m, " ================");
+		seq_puts(m, "\n");
+		return 0;
+	}
+
+	/* filter out any unwanted objects */
+#define FILTER(criterion, _yes, _no)					\
+	do {								\
+		unsigned long yes = FSCACHE_OBJLIST_CONFIG_##_yes;	\
+		unsigned long no = FSCACHE_OBJLIST_CONFIG_##_no;	\
+		if (criterion) {					\
+			if (!(config & yes))				\
+				return 0;				\
+		} else {						\
+			if (!(config & no))				\
+				return 0;				\
+		}							\
+	} while(0)
+
+	if (~config) {
+		FILTER(obj->cookie,
+		       COOKIE, NOCOOKIE);
+		FILTER(obj->state != FSCACHE_OBJECT_ACTIVE ||
+		       obj->n_ops != 0 ||
+		       obj->n_obj_ops != 0 ||
+		       obj->flags ||
+		       !list_empty(&obj->dependents),
+		       BUSY, IDLE);
+		FILTER(test_bit(FSCACHE_OBJECT_PENDING_WRITE, &obj->flags),
+		       PENDWR, NOPENDWR);
+		FILTER(atomic_read(&obj->n_reads),
+		       READS, NOREADS);
+		FILTER(obj->events & obj->event_mask,
+		       EVENTS, NOEVENTS);
+		FILTER(obj->work.flags & ~(1UL << SLOW_WORK_VERY_SLOW),
+		       WORK, NOWORK);
+	}
+
+	seq_printf(m,
+		   "%8x %8x %s %5u %3u %3u %3u %2u %5u %2lx %2lx %1lx %1lx | ",
+		   obj->debug_id,
+		   obj->parent ? obj->parent->debug_id : -1,
+		   fscache_object_states_short[obj->state],
+		   obj->n_children,
+		   obj->n_ops,
+		   obj->n_obj_ops,
+		   obj->n_in_progress,
+		   obj->n_exclusive,
+		   atomic_read(&obj->n_reads),
+		   obj->event_mask & FSCACHE_OBJECT_EVENTS_MASK,
+		   obj->events,
+		   obj->flags,
+		   obj->work.flags);
+
+	no_cookie = true;
+	keylen = auxlen = 0;
+	if (obj->cookie) {
+		spin_lock(&obj->lock);
+		if (obj->cookie) {
+			switch (obj->cookie->def->type) {
+			case 0:
+				type = "IX";
+				break;
+			case 1:
+				type = "DT";
+				break;
+			default:
+				sprintf(_type, "%02u",
+					obj->cookie->def->type);
+				type = _type;
+				break;
+			}
+
+			seq_printf(m, "%-16s %s %2lx %16p",
+				   obj->cookie->def->name,
+				   type,
+				   obj->cookie->flags,
+				   obj->cookie->netfs_data);
+
+			if (obj->cookie->def->get_key &&
+			    config & FSCACHE_OBJLIST_CONFIG_KEY)
+				keylen = obj->cookie->def->get_key(
+					obj->cookie->netfs_data,
+					buf, 400);
+
+			if (obj->cookie->def->get_aux &&
+			    config & FSCACHE_OBJLIST_CONFIG_AUX)
+				auxlen = obj->cookie->def->get_aux(
+					obj->cookie->netfs_data,
+					buf + keylen, 512 - keylen);
+
+			no_cookie = false;
+		}
+		spin_unlock(&obj->lock);
+
+		if (!no_cookie && (keylen > 0 || auxlen > 0)) {
+			seq_printf(m, " ");
+			for (p = buf; keylen > 0; keylen--)
+				seq_printf(m, "%02x", *p++);
+			if (auxlen > 0) {
+				if (config & FSCACHE_OBJLIST_CONFIG_KEY)
+					seq_printf(m, ", ");
+				for (; auxlen > 0; auxlen--)
+					seq_printf(m, "%02x", *p++);
+			}
+		}
+	}
+
+	if (no_cookie)
+		seq_printf(m, "<no_cookie>\n");
+	else
+		seq_printf(m, "\n");
+	return 0;
+}
+
+static const struct seq_operations fscache_objlist_ops = {
+	.start		= fscache_objlist_start,
+	.stop		= fscache_objlist_stop,
+	.next		= fscache_objlist_next,
+	.show		= fscache_objlist_show,
+};
+
+/*
+ * get the configuration for filtering the list
+ */
+static void fscache_objlist_config(struct fscache_objlist_data *data)
+{
+#ifdef CONFIG_KEYS
+	struct user_key_payload *confkey;
+	unsigned long config;
+	struct key *key;
+	const char *buf;
+	int len;
+
+	key = request_key(&key_type_user, "fscache:objlist", NULL);
+	if (IS_ERR(key))
+		goto no_config;
+
+	config = 0;
+	rcu_read_lock();
+
+	confkey = key->payload.data;
+	buf = confkey->data;
+
+	for (len = confkey->datalen - 1; len >= 0; len--) {
+		switch (buf[len]) {
+		case 'K': config |= FSCACHE_OBJLIST_CONFIG_KEY;		break;
+		case 'A': config |= FSCACHE_OBJLIST_CONFIG_AUX;		break;
+		case 'C': config |= FSCACHE_OBJLIST_CONFIG_COOKIE;	break;
+		case 'c': config |= FSCACHE_OBJLIST_CONFIG_NOCOOKIE;	break;
+		case 'B': config |= FSCACHE_OBJLIST_CONFIG_BUSY;	break;
+		case 'b': config |= FSCACHE_OBJLIST_CONFIG_IDLE;	break;
+		case 'W': config |= FSCACHE_OBJLIST_CONFIG_PENDWR;	break;
+		case 'w': config |= FSCACHE_OBJLIST_CONFIG_NOPENDWR;	break;
+		case 'R': config |= FSCACHE_OBJLIST_CONFIG_READS;	break;
+		case 'r': config |= FSCACHE_OBJLIST_CONFIG_NOREADS;	break;
+		case 'S': config |= FSCACHE_OBJLIST_CONFIG_WORK;	break;
+		case 's': config |= FSCACHE_OBJLIST_CONFIG_NOWORK;	break;
+		}
+	}
+
+	rcu_read_unlock();
+	key_put(key);
+
+	if (!(config & (FSCACHE_OBJLIST_CONFIG_COOKIE | FSCACHE_OBJLIST_CONFIG_NOCOOKIE)))
+	    config   |= FSCACHE_OBJLIST_CONFIG_COOKIE | FSCACHE_OBJLIST_CONFIG_NOCOOKIE;
+	if (!(config & (FSCACHE_OBJLIST_CONFIG_BUSY | FSCACHE_OBJLIST_CONFIG_IDLE)))
+	    config   |= FSCACHE_OBJLIST_CONFIG_BUSY | FSCACHE_OBJLIST_CONFIG_IDLE;
+	if (!(config & (FSCACHE_OBJLIST_CONFIG_PENDWR | FSCACHE_OBJLIST_CONFIG_NOPENDWR)))
+	    config   |= FSCACHE_OBJLIST_CONFIG_PENDWR | FSCACHE_OBJLIST_CONFIG_NOPENDWR;
+	if (!(config & (FSCACHE_OBJLIST_CONFIG_READS | FSCACHE_OBJLIST_CONFIG_NOREADS)))
+	    config   |= FSCACHE_OBJLIST_CONFIG_READS | FSCACHE_OBJLIST_CONFIG_NOREADS;
+	if (!(config & (FSCACHE_OBJLIST_CONFIG_EVENTS | FSCACHE_OBJLIST_CONFIG_NOEVENTS)))
+	    config   |= FSCACHE_OBJLIST_CONFIG_EVENTS | FSCACHE_OBJLIST_CONFIG_NOEVENTS;
+	if (!(config & (FSCACHE_OBJLIST_CONFIG_WORK | FSCACHE_OBJLIST_CONFIG_NOWORK)))
+	    config   |= FSCACHE_OBJLIST_CONFIG_WORK | FSCACHE_OBJLIST_CONFIG_NOWORK;
+
+	data->config = config;
+	return;
+
+no_config:
+#endif
+	data->config = ULONG_MAX;
+}
+
+/*
+ * open "/proc/fs/fscache/objects" to provide a list of active objects
+ * - can be configured by a user-defined key added to the caller's keyrings
+ */
+static int fscache_objlist_open(struct inode *inode, struct file *file)
+{
+	struct fscache_objlist_data *data;
+	struct seq_file *m;
+	int ret;
+
+	ret = seq_open(file, &fscache_objlist_ops);
+	if (ret < 0)
+		return ret;
+
+	m = file->private_data;
+
+	/* buffer for key extraction */
+	data = kmalloc(sizeof(struct fscache_objlist_data), GFP_KERNEL);
+	if (!data) {
+		seq_release(inode, file);
+		return -ENOMEM;
+	}
+
+	/* get the configuration key */
+	fscache_objlist_config(data);
+
+	m->private = data;
+	return 0;
+}
+
+/*
+ * clean up on close
+ */
+static int fscache_objlist_release(struct inode *inode, struct file *file)
+{
+	struct seq_file *m = file->private_data;
+
+	kfree(m->private);
+	m->private = NULL;
+	return seq_release(inode, file);
+}
+
+const struct file_operations fscache_objlist_fops = {
+	.owner		= THIS_MODULE,
+	.open		= fscache_objlist_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= fscache_objlist_release,
+};
diff --git a/fs/fscache/object.c b/fs/fscache/object.c
index 392a41b..e513ac5 100644
--- a/fs/fscache/object.c
+++ b/fs/fscache/object.c
@@ -14,9 +14,10 @@
 
 #define FSCACHE_DEBUG_LEVEL COOKIE
 #include <linux/module.h>
+#include <linux/seq_file.h>
 #include "internal.h"
 
-const char *fscache_object_states[] = {
+const char *fscache_object_states[FSCACHE_OBJECT__NSTATES] = {
 	[FSCACHE_OBJECT_INIT]		= "OBJECT_INIT",
 	[FSCACHE_OBJECT_LOOKING_UP]	= "OBJECT_LOOKING_UP",
 	[FSCACHE_OBJECT_CREATING]	= "OBJECT_CREATING",
@@ -33,9 +34,28 @@
 };
 EXPORT_SYMBOL(fscache_object_states);
 
+const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = {
+	[FSCACHE_OBJECT_INIT]		= "INIT",
+	[FSCACHE_OBJECT_LOOKING_UP]	= "LOOK",
+	[FSCACHE_OBJECT_CREATING]	= "CRTN",
+	[FSCACHE_OBJECT_AVAILABLE]	= "AVBL",
+	[FSCACHE_OBJECT_ACTIVE]		= "ACTV",
+	[FSCACHE_OBJECT_UPDATING]	= "UPDT",
+	[FSCACHE_OBJECT_DYING]		= "DYNG",
+	[FSCACHE_OBJECT_LC_DYING]	= "LCDY",
+	[FSCACHE_OBJECT_ABORT_INIT]	= "ABTI",
+	[FSCACHE_OBJECT_RELEASING]	= "RELS",
+	[FSCACHE_OBJECT_RECYCLING]	= "RCYC",
+	[FSCACHE_OBJECT_WITHDRAWING]	= "WTHD",
+	[FSCACHE_OBJECT_DEAD]		= "DEAD",
+};
+
 static void fscache_object_slow_work_put_ref(struct slow_work *);
 static int  fscache_object_slow_work_get_ref(struct slow_work *);
 static void fscache_object_slow_work_execute(struct slow_work *);
+#ifdef CONFIG_SLOW_WORK_PROC
+static void fscache_object_slow_work_desc(struct slow_work *, struct seq_file *);
+#endif
 static void fscache_initialise_object(struct fscache_object *);
 static void fscache_lookup_object(struct fscache_object *);
 static void fscache_object_available(struct fscache_object *);
@@ -45,9 +65,13 @@
 static void fscache_dequeue_object(struct fscache_object *);
 
 const struct slow_work_ops fscache_object_slow_work_ops = {
+	.owner		= THIS_MODULE,
 	.get_ref	= fscache_object_slow_work_get_ref,
 	.put_ref	= fscache_object_slow_work_put_ref,
 	.execute	= fscache_object_slow_work_execute,
+#ifdef CONFIG_SLOW_WORK_PROC
+	.desc		= fscache_object_slow_work_desc,
+#endif
 };
 EXPORT_SYMBOL(fscache_object_slow_work_ops);
 
@@ -81,6 +105,7 @@
 static void fscache_object_state_machine(struct fscache_object *object)
 {
 	enum fscache_object_state new_state;
+	struct fscache_cookie *cookie;
 
 	ASSERT(object != NULL);
 
@@ -120,20 +145,31 @@
 	case FSCACHE_OBJECT_UPDATING:
 		clear_bit(FSCACHE_OBJECT_EV_UPDATE, &object->events);
 		fscache_stat(&fscache_n_updates_run);
+		fscache_stat(&fscache_n_cop_update_object);
 		object->cache->ops->update_object(object);
+		fscache_stat_d(&fscache_n_cop_update_object);
 		goto active_transit;
 
 		/* handle an object dying during lookup or creation */
 	case FSCACHE_OBJECT_LC_DYING:
 		object->event_mask &= ~(1 << FSCACHE_OBJECT_EV_UPDATE);
+		fscache_stat(&fscache_n_cop_lookup_complete);
 		object->cache->ops->lookup_complete(object);
+		fscache_stat_d(&fscache_n_cop_lookup_complete);
 
 		spin_lock(&object->lock);
 		object->state = FSCACHE_OBJECT_DYING;
-		if (test_and_clear_bit(FSCACHE_COOKIE_CREATING,
-				       &object->cookie->flags))
-			wake_up_bit(&object->cookie->flags,
-				    FSCACHE_COOKIE_CREATING);
+		cookie = object->cookie;
+		if (cookie) {
+			if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP,
+					       &cookie->flags))
+				wake_up_bit(&cookie->flags,
+					    FSCACHE_COOKIE_LOOKING_UP);
+			if (test_and_clear_bit(FSCACHE_COOKIE_CREATING,
+					       &cookie->flags))
+				wake_up_bit(&cookie->flags,
+					    FSCACHE_COOKIE_CREATING);
+		}
 		spin_unlock(&object->lock);
 
 		fscache_done_parent_op(object);
@@ -165,6 +201,7 @@
 		}
 		spin_unlock(&object->lock);
 		fscache_enqueue_dependents(object);
+		fscache_start_operations(object);
 		goto terminal_transit;
 
 		/* handle an abort during initialisation */
@@ -316,16 +353,31 @@
 
 	_enter("{OBJ%x}", object->debug_id);
 
-	clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events);
-
 	start = jiffies;
 	fscache_object_state_machine(object);
 	fscache_hist(fscache_objs_histogram, start);
 	if (object->events & object->event_mask)
 		fscache_enqueue_object(object);
+	clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events);
 }
 
 /*
+ * describe an object for slow-work debugging
+ */
+#ifdef CONFIG_SLOW_WORK_PROC
+static void fscache_object_slow_work_desc(struct slow_work *work,
+					  struct seq_file *m)
+{
+	struct fscache_object *object =
+		container_of(work, struct fscache_object, work);
+
+	seq_printf(m, "FSC: OBJ%x: %s",
+		   object->debug_id,
+		   fscache_object_states_short[object->state]);
+}
+#endif
+
+/*
  * initialise an object
  * - check the specified object's parent to see if we can make use of it
  *   immediately to do a creation
@@ -376,7 +428,9 @@
 			 * binding on to us, so we need to make sure we don't
 			 * add ourself to the list multiple times */
 			if (list_empty(&object->dep_link)) {
+				fscache_stat(&fscache_n_cop_grab_object);
 				object->cache->ops->grab_object(object);
+				fscache_stat_d(&fscache_n_cop_grab_object);
 				list_add(&object->dep_link,
 					 &parent->dependents);
 
@@ -414,6 +468,7 @@
 {
 	struct fscache_cookie *cookie = object->cookie;
 	struct fscache_object *parent;
+	int ret;
 
 	_enter("");
 
@@ -438,11 +493,20 @@
 	       object->cache->tag->name);
 
 	fscache_stat(&fscache_n_object_lookups);
-	object->cache->ops->lookup_object(object);
+	fscache_stat(&fscache_n_cop_lookup_object);
+	ret = object->cache->ops->lookup_object(object);
+	fscache_stat_d(&fscache_n_cop_lookup_object);
 
 	if (test_bit(FSCACHE_OBJECT_EV_ERROR, &object->events))
 		set_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags);
 
+	if (ret == -ETIMEDOUT) {
+		/* probably stuck behind another object, so move this one to
+		 * the back of the queue */
+		fscache_stat(&fscache_n_object_lookups_timed_out);
+		set_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events);
+	}
+
 	_leave("");
 }
 
@@ -546,7 +610,8 @@
 
 	spin_lock(&object->lock);
 
-	if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags))
+	if (object->cookie &&
+	    test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags))
 		wake_up_bit(&object->cookie->flags, FSCACHE_COOKIE_CREATING);
 
 	fscache_done_parent_op(object);
@@ -562,7 +627,9 @@
 	}
 	spin_unlock(&object->lock);
 
+	fscache_stat(&fscache_n_cop_lookup_complete);
 	object->cache->ops->lookup_complete(object);
+	fscache_stat_d(&fscache_n_cop_lookup_complete);
 	fscache_enqueue_dependents(object);
 
 	fscache_hist(fscache_obj_instantiate_histogram, object->lookup_jif);
@@ -581,11 +648,16 @@
 
 	_enter("{OBJ%x,%d}", object->debug_id, object->n_children);
 
+	ASSERTCMP(object->cookie, ==, NULL);
+	ASSERT(hlist_unhashed(&object->cookie_link));
+
 	spin_lock(&cache->object_list_lock);
 	list_del_init(&object->cache_link);
 	spin_unlock(&cache->object_list_lock);
 
+	fscache_stat(&fscache_n_cop_drop_object);
 	cache->ops->drop_object(object);
+	fscache_stat_d(&fscache_n_cop_drop_object);
 
 	if (parent) {
 		_debug("release parent OBJ%x {%d}",
@@ -600,7 +672,9 @@
 	}
 
 	/* this just shifts the object release to the slow work processor */
+	fscache_stat(&fscache_n_cop_put_object);
 	object->cache->ops->put_object(object);
+	fscache_stat_d(&fscache_n_cop_put_object);
 
 	_leave("");
 }
@@ -690,8 +764,12 @@
 {
 	struct fscache_object *object =
 		container_of(work, struct fscache_object, work);
+	int ret;
 
-	return object->cache->ops->grab_object(object) ? 0 : -EAGAIN;
+	fscache_stat(&fscache_n_cop_grab_object);
+	ret = object->cache->ops->grab_object(object) ? 0 : -EAGAIN;
+	fscache_stat_d(&fscache_n_cop_grab_object);
+	return ret;
 }
 
 /*
@@ -702,7 +780,9 @@
 	struct fscache_object *object =
 		container_of(work, struct fscache_object, work);
 
-	return object->cache->ops->put_object(object);
+	fscache_stat(&fscache_n_cop_put_object);
+	object->cache->ops->put_object(object);
+	fscache_stat_d(&fscache_n_cop_put_object);
 }
 
 /*
@@ -739,7 +819,9 @@
 
 		/* sort onto appropriate lists */
 		fscache_enqueue_object(dep);
+		fscache_stat(&fscache_n_cop_put_object);
 		dep->cache->ops->put_object(dep);
+		fscache_stat_d(&fscache_n_cop_put_object);
 
 		if (!list_empty(&object->dependents))
 			cond_resched_lock(&object->lock);
diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c
index e7f8d53..313e79a 100644
--- a/fs/fscache/operation.c
+++ b/fs/fscache/operation.c
@@ -13,6 +13,7 @@
 
 #define FSCACHE_DEBUG_LEVEL OPERATION
 #include <linux/module.h>
+#include <linux/seq_file.h>
 #include "internal.h"
 
 atomic_t fscache_op_debug_id;
@@ -31,32 +32,33 @@
 	_enter("{OBJ%x OP%x,%u}",
 	       op->object->debug_id, op->debug_id, atomic_read(&op->usage));
 
+	fscache_set_op_state(op, "EnQ");
+
+	ASSERT(list_empty(&op->pend_link));
 	ASSERT(op->processor != NULL);
 	ASSERTCMP(op->object->state, >=, FSCACHE_OBJECT_AVAILABLE);
 	ASSERTCMP(atomic_read(&op->usage), >, 0);
 
-	if (list_empty(&op->pend_link)) {
-		switch (op->flags & FSCACHE_OP_TYPE) {
-		case FSCACHE_OP_FAST:
-			_debug("queue fast");
-			atomic_inc(&op->usage);
-			if (!schedule_work(&op->fast_work))
-				fscache_put_operation(op);
-			break;
-		case FSCACHE_OP_SLOW:
-			_debug("queue slow");
-			slow_work_enqueue(&op->slow_work);
-			break;
-		case FSCACHE_OP_MYTHREAD:
-			_debug("queue for caller's attention");
-			break;
-		default:
-			printk(KERN_ERR "FS-Cache: Unexpected op type %lx",
-			       op->flags);
-			BUG();
-			break;
-		}
-		fscache_stat(&fscache_n_op_enqueue);
+	fscache_stat(&fscache_n_op_enqueue);
+	switch (op->flags & FSCACHE_OP_TYPE) {
+	case FSCACHE_OP_FAST:
+		_debug("queue fast");
+		atomic_inc(&op->usage);
+		if (!schedule_work(&op->fast_work))
+			fscache_put_operation(op);
+		break;
+	case FSCACHE_OP_SLOW:
+		_debug("queue slow");
+		slow_work_enqueue(&op->slow_work);
+		break;
+	case FSCACHE_OP_MYTHREAD:
+		_debug("queue for caller's attention");
+		break;
+	default:
+		printk(KERN_ERR "FS-Cache: Unexpected op type %lx",
+		       op->flags);
+		BUG();
+		break;
 	}
 }
 EXPORT_SYMBOL(fscache_enqueue_operation);
@@ -67,6 +69,8 @@
 static void fscache_run_op(struct fscache_object *object,
 			   struct fscache_operation *op)
 {
+	fscache_set_op_state(op, "Run");
+
 	object->n_in_progress++;
 	if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags))
 		wake_up_bit(&op->flags, FSCACHE_OP_WAITING);
@@ -87,9 +91,12 @@
 
 	_enter("{OBJ%x OP%x},", object->debug_id, op->debug_id);
 
+	fscache_set_op_state(op, "SubmitX");
+
 	spin_lock(&object->lock);
 	ASSERTCMP(object->n_ops, >=, object->n_in_progress);
 	ASSERTCMP(object->n_ops, >=, object->n_exclusive);
+	ASSERT(list_empty(&op->pend_link));
 
 	ret = -ENOBUFS;
 	if (fscache_object_is_active(object)) {
@@ -190,9 +197,12 @@
 
 	ASSERTCMP(atomic_read(&op->usage), >, 0);
 
+	fscache_set_op_state(op, "Submit");
+
 	spin_lock(&object->lock);
 	ASSERTCMP(object->n_ops, >=, object->n_in_progress);
 	ASSERTCMP(object->n_ops, >=, object->n_exclusive);
+	ASSERT(list_empty(&op->pend_link));
 
 	ostate = object->state;
 	smp_rmb();
@@ -222,6 +232,11 @@
 		list_add_tail(&op->pend_link, &object->pending_ops);
 		fscache_stat(&fscache_n_op_pend);
 		ret = 0;
+	} else if (object->state == FSCACHE_OBJECT_DYING ||
+		   object->state == FSCACHE_OBJECT_LC_DYING ||
+		   object->state == FSCACHE_OBJECT_WITHDRAWING) {
+		fscache_stat(&fscache_n_op_rejected);
+		ret = -ENOBUFS;
 	} else if (!test_bit(FSCACHE_IOERROR, &object->cache->flags)) {
 		fscache_report_unexpected_submission(object, op, ostate);
 		ASSERT(!fscache_object_is_active(object));
@@ -264,12 +279,7 @@
 			stop = true;
 		}
 		list_del_init(&op->pend_link);
-		object->n_in_progress++;
-
-		if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags))
-			wake_up_bit(&op->flags, FSCACHE_OP_WAITING);
-		if (op->processor)
-			fscache_enqueue_operation(op);
+		fscache_run_op(object, op);
 
 		/* the pending queue was holding a ref on the object */
 		fscache_put_operation(op);
@@ -282,6 +292,36 @@
 }
 
 /*
+ * cancel an operation that's pending on an object
+ */
+int fscache_cancel_op(struct fscache_operation *op)
+{
+	struct fscache_object *object = op->object;
+	int ret;
+
+	_enter("OBJ%x OP%x}", op->object->debug_id, op->debug_id);
+
+	spin_lock(&object->lock);
+
+	ret = -EBUSY;
+	if (!list_empty(&op->pend_link)) {
+		fscache_stat(&fscache_n_op_cancelled);
+		list_del_init(&op->pend_link);
+		object->n_ops--;
+		if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags))
+			object->n_exclusive--;
+		if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags))
+			wake_up_bit(&op->flags, FSCACHE_OP_WAITING);
+		fscache_put_operation(op);
+		ret = 0;
+	}
+
+	spin_unlock(&object->lock);
+	_leave(" = %d", ret);
+	return ret;
+}
+
+/*
  * release an operation
  * - queues pending ops if this is the last in-progress op
  */
@@ -298,6 +338,8 @@
 	if (!atomic_dec_and_test(&op->usage))
 		return;
 
+	fscache_set_op_state(op, "Put");
+
 	_debug("PUT OP");
 	if (test_and_set_bit(FSCACHE_OP_DEAD, &op->flags))
 		BUG();
@@ -311,6 +353,9 @@
 
 	object = op->object;
 
+	if (test_bit(FSCACHE_OP_DEC_READ_CNT, &op->flags))
+		atomic_dec(&object->n_reads);
+
 	/* now... we may get called with the object spinlock held, so we
 	 * complete the cleanup here only if we can immediately acquire the
 	 * lock, and defer it otherwise */
@@ -452,8 +497,27 @@
 	_leave("");
 }
 
+/*
+ * describe an operation for slow-work debugging
+ */
+#ifdef CONFIG_SLOW_WORK_PROC
+static void fscache_op_desc(struct slow_work *work, struct seq_file *m)
+{
+	struct fscache_operation *op =
+		container_of(work, struct fscache_operation, slow_work);
+
+	seq_printf(m, "FSC: OBJ%x OP%x: %s/%s fl=%lx",
+		   op->object->debug_id, op->debug_id,
+		   op->name, op->state, op->flags);
+}
+#endif
+
 const struct slow_work_ops fscache_op_slow_work_ops = {
+	.owner		= THIS_MODULE,
 	.get_ref	= fscache_op_get_ref,
 	.put_ref	= fscache_op_put_ref,
 	.execute	= fscache_op_execute,
+#ifdef CONFIG_SLOW_WORK_PROC
+	.desc		= fscache_op_desc,
+#endif
 };
diff --git a/fs/fscache/page.c b/fs/fscache/page.c
index 2568e0e..c598ea4 100644
--- a/fs/fscache/page.c
+++ b/fs/fscache/page.c
@@ -43,18 +43,102 @@
 EXPORT_SYMBOL(__fscache_wait_on_page_write);
 
 /*
- * note that a page has finished being written to the cache
+ * decide whether a page can be released, possibly by cancelling a store to it
+ * - we're allowed to sleep if __GFP_WAIT is flagged
  */
-static void fscache_end_page_write(struct fscache_cookie *cookie, struct page *page)
+bool __fscache_maybe_release_page(struct fscache_cookie *cookie,
+				  struct page *page,
+				  gfp_t gfp)
 {
 	struct page *xpage;
+	void *val;
 
-	spin_lock(&cookie->lock);
+	_enter("%p,%p,%x", cookie, page, gfp);
+
+	rcu_read_lock();
+	val = radix_tree_lookup(&cookie->stores, page->index);
+	if (!val) {
+		rcu_read_unlock();
+		fscache_stat(&fscache_n_store_vmscan_not_storing);
+		__fscache_uncache_page(cookie, page);
+		return true;
+	}
+
+	/* see if the page is actually undergoing storage - if so we can't get
+	 * rid of it till the cache has finished with it */
+	if (radix_tree_tag_get(&cookie->stores, page->index,
+			       FSCACHE_COOKIE_STORING_TAG)) {
+		rcu_read_unlock();
+		goto page_busy;
+	}
+
+	/* the page is pending storage, so we attempt to cancel the store and
+	 * discard the store request so that the page can be reclaimed */
+	spin_lock(&cookie->stores_lock);
+	rcu_read_unlock();
+
+	if (radix_tree_tag_get(&cookie->stores, page->index,
+			       FSCACHE_COOKIE_STORING_TAG)) {
+		/* the page started to undergo storage whilst we were looking,
+		 * so now we can only wait or return */
+		spin_unlock(&cookie->stores_lock);
+		goto page_busy;
+	}
+
 	xpage = radix_tree_delete(&cookie->stores, page->index);
-	spin_unlock(&cookie->lock);
-	ASSERT(xpage != NULL);
+	spin_unlock(&cookie->stores_lock);
+
+	if (xpage) {
+		fscache_stat(&fscache_n_store_vmscan_cancelled);
+		fscache_stat(&fscache_n_store_radix_deletes);
+		ASSERTCMP(xpage, ==, page);
+	} else {
+		fscache_stat(&fscache_n_store_vmscan_gone);
+	}
 
 	wake_up_bit(&cookie->flags, 0);
+	if (xpage)
+		page_cache_release(xpage);
+	__fscache_uncache_page(cookie, page);
+	return true;
+
+page_busy:
+	/* we might want to wait here, but that could deadlock the allocator as
+	 * the slow-work threads writing to the cache may all end up sleeping
+	 * on memory allocation */
+	fscache_stat(&fscache_n_store_vmscan_busy);
+	return false;
+}
+EXPORT_SYMBOL(__fscache_maybe_release_page);
+
+/*
+ * note that a page has finished being written to the cache
+ */
+static void fscache_end_page_write(struct fscache_object *object,
+				   struct page *page)
+{
+	struct fscache_cookie *cookie;
+	struct page *xpage = NULL;
+
+	spin_lock(&object->lock);
+	cookie = object->cookie;
+	if (cookie) {
+		/* delete the page from the tree if it is now no longer
+		 * pending */
+		spin_lock(&cookie->stores_lock);
+		radix_tree_tag_clear(&cookie->stores, page->index,
+				     FSCACHE_COOKIE_STORING_TAG);
+		if (!radix_tree_tag_get(&cookie->stores, page->index,
+					FSCACHE_COOKIE_PENDING_TAG)) {
+			fscache_stat(&fscache_n_store_radix_deletes);
+			xpage = radix_tree_delete(&cookie->stores, page->index);
+		}
+		spin_unlock(&cookie->stores_lock);
+		wake_up_bit(&cookie->flags, 0);
+	}
+	spin_unlock(&object->lock);
+	if (xpage)
+		page_cache_release(xpage);
 }
 
 /*
@@ -63,14 +147,21 @@
 static void fscache_attr_changed_op(struct fscache_operation *op)
 {
 	struct fscache_object *object = op->object;
+	int ret;
 
 	_enter("{OBJ%x OP%x}", object->debug_id, op->debug_id);
 
 	fscache_stat(&fscache_n_attr_changed_calls);
 
-	if (fscache_object_is_active(object) &&
-	    object->cache->ops->attr_changed(object) < 0)
-		fscache_abort_object(object);
+	if (fscache_object_is_active(object)) {
+		fscache_set_op_state(op, "CallFS");
+		fscache_stat(&fscache_n_cop_attr_changed);
+		ret = object->cache->ops->attr_changed(object);
+		fscache_stat_d(&fscache_n_cop_attr_changed);
+		fscache_set_op_state(op, "Done");
+		if (ret < 0)
+			fscache_abort_object(object);
+	}
 
 	_leave("");
 }
@@ -99,6 +190,7 @@
 	fscache_operation_init(op, NULL);
 	fscache_operation_init_slow(op, fscache_attr_changed_op);
 	op->flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_EXCLUSIVE);
+	fscache_set_op_name(op, "Attr");
 
 	spin_lock(&cookie->lock);
 
@@ -184,6 +276,7 @@
 	op->start_time	= jiffies;
 	INIT_WORK(&op->op.fast_work, fscache_retrieval_work);
 	INIT_LIST_HEAD(&op->to_do);
+	fscache_set_op_name(&op->op, "Retr");
 	return op;
 }
 
@@ -221,6 +314,43 @@
 }
 
 /*
+ * wait for an object to become active (or dead)
+ */
+static int fscache_wait_for_retrieval_activation(struct fscache_object *object,
+						 struct fscache_retrieval *op,
+						 atomic_t *stat_op_waits,
+						 atomic_t *stat_object_dead)
+{
+	int ret;
+
+	if (!test_bit(FSCACHE_OP_WAITING, &op->op.flags))
+		goto check_if_dead;
+
+	_debug(">>> WT");
+	fscache_stat(stat_op_waits);
+	if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING,
+			fscache_wait_bit_interruptible,
+			TASK_INTERRUPTIBLE) < 0) {
+		ret = fscache_cancel_op(&op->op);
+		if (ret == 0)
+			return -ERESTARTSYS;
+
+		/* it's been removed from the pending queue by another party,
+		 * so we should get to run shortly */
+		wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING,
+			    fscache_wait_bit, TASK_UNINTERRUPTIBLE);
+	}
+	_debug("<<< GO");
+
+check_if_dead:
+	if (unlikely(fscache_object_is_dead(object))) {
+		fscache_stat(stat_object_dead);
+		return -ENOBUFS;
+	}
+	return 0;
+}
+
+/*
  * read a page from the cache or allocate a block in which to store it
  * - we return:
  *   -ENOMEM	- out of memory, nothing done
@@ -257,6 +387,7 @@
 		_leave(" = -ENOMEM");
 		return -ENOMEM;
 	}
+	fscache_set_op_name(&op->op, "RetrRA1");
 
 	spin_lock(&cookie->lock);
 
@@ -267,6 +398,9 @@
 
 	ASSERTCMP(object->state, >, FSCACHE_OBJECT_LOOKING_UP);
 
+	atomic_inc(&object->n_reads);
+	set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags);
+
 	if (fscache_submit_op(object, &op->op) < 0)
 		goto nobufs_unlock;
 	spin_unlock(&cookie->lock);
@@ -279,23 +413,27 @@
 
 	/* we wait for the operation to become active, and then process it
 	 * *here*, in this thread, and not in the thread pool */
-	if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) {
-		_debug(">>> WT");
-		fscache_stat(&fscache_n_retrieval_op_waits);
-		wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING,
-			    fscache_wait_bit, TASK_UNINTERRUPTIBLE);
-		_debug("<<< GO");
-	}
+	ret = fscache_wait_for_retrieval_activation(
+		object, op,
+		__fscache_stat(&fscache_n_retrieval_op_waits),
+		__fscache_stat(&fscache_n_retrievals_object_dead));
+	if (ret < 0)
+		goto error;
 
 	/* ask the cache to honour the operation */
 	if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) {
+		fscache_stat(&fscache_n_cop_allocate_page);
 		ret = object->cache->ops->allocate_page(op, page, gfp);
+		fscache_stat_d(&fscache_n_cop_allocate_page);
 		if (ret == 0)
 			ret = -ENODATA;
 	} else {
+		fscache_stat(&fscache_n_cop_read_or_alloc_page);
 		ret = object->cache->ops->read_or_alloc_page(op, page, gfp);
+		fscache_stat_d(&fscache_n_cop_read_or_alloc_page);
 	}
 
+error:
 	if (ret == -ENOMEM)
 		fscache_stat(&fscache_n_retrievals_nomem);
 	else if (ret == -ERESTARTSYS)
@@ -347,7 +485,6 @@
 				  void *context,
 				  gfp_t gfp)
 {
-	fscache_pages_retrieval_func_t func;
 	struct fscache_retrieval *op;
 	struct fscache_object *object;
 	int ret;
@@ -369,6 +506,7 @@
 	op = fscache_alloc_retrieval(mapping, end_io_func, context);
 	if (!op)
 		return -ENOMEM;
+	fscache_set_op_name(&op->op, "RetrRAN");
 
 	spin_lock(&cookie->lock);
 
@@ -377,6 +515,9 @@
 	object = hlist_entry(cookie->backing_objects.first,
 			     struct fscache_object, cookie_link);
 
+	atomic_inc(&object->n_reads);
+	set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags);
+
 	if (fscache_submit_op(object, &op->op) < 0)
 		goto nobufs_unlock;
 	spin_unlock(&cookie->lock);
@@ -389,21 +530,27 @@
 
 	/* we wait for the operation to become active, and then process it
 	 * *here*, in this thread, and not in the thread pool */
-	if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) {
-		_debug(">>> WT");
-		fscache_stat(&fscache_n_retrieval_op_waits);
-		wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING,
-			    fscache_wait_bit, TASK_UNINTERRUPTIBLE);
-		_debug("<<< GO");
-	}
+	ret = fscache_wait_for_retrieval_activation(
+		object, op,
+		__fscache_stat(&fscache_n_retrieval_op_waits),
+		__fscache_stat(&fscache_n_retrievals_object_dead));
+	if (ret < 0)
+		goto error;
 
 	/* ask the cache to honour the operation */
-	if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags))
-		func = object->cache->ops->allocate_pages;
-	else
-		func = object->cache->ops->read_or_alloc_pages;
-	ret = func(op, pages, nr_pages, gfp);
+	if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) {
+		fscache_stat(&fscache_n_cop_allocate_pages);
+		ret = object->cache->ops->allocate_pages(
+			op, pages, nr_pages, gfp);
+		fscache_stat_d(&fscache_n_cop_allocate_pages);
+	} else {
+		fscache_stat(&fscache_n_cop_read_or_alloc_pages);
+		ret = object->cache->ops->read_or_alloc_pages(
+			op, pages, nr_pages, gfp);
+		fscache_stat_d(&fscache_n_cop_read_or_alloc_pages);
+	}
 
+error:
 	if (ret == -ENOMEM)
 		fscache_stat(&fscache_n_retrievals_nomem);
 	else if (ret == -ERESTARTSYS)
@@ -461,6 +608,7 @@
 	op = fscache_alloc_retrieval(page->mapping, NULL, NULL);
 	if (!op)
 		return -ENOMEM;
+	fscache_set_op_name(&op->op, "RetrAL1");
 
 	spin_lock(&cookie->lock);
 
@@ -475,18 +623,22 @@
 
 	fscache_stat(&fscache_n_alloc_ops);
 
-	if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) {
-		_debug(">>> WT");
-		fscache_stat(&fscache_n_alloc_op_waits);
-		wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING,
-			    fscache_wait_bit, TASK_UNINTERRUPTIBLE);
-		_debug("<<< GO");
-	}
+	ret = fscache_wait_for_retrieval_activation(
+		object, op,
+		__fscache_stat(&fscache_n_alloc_op_waits),
+		__fscache_stat(&fscache_n_allocs_object_dead));
+	if (ret < 0)
+		goto error;
 
 	/* ask the cache to honour the operation */
+	fscache_stat(&fscache_n_cop_allocate_page);
 	ret = object->cache->ops->allocate_page(op, page, gfp);
+	fscache_stat_d(&fscache_n_cop_allocate_page);
 
-	if (ret < 0)
+error:
+	if (ret == -ERESTARTSYS)
+		fscache_stat(&fscache_n_allocs_intr);
+	else if (ret < 0)
 		fscache_stat(&fscache_n_allocs_nobufs);
 	else
 		fscache_stat(&fscache_n_allocs_ok);
@@ -521,7 +673,7 @@
 	struct fscache_storage *op =
 		container_of(_op, struct fscache_storage, op);
 	struct fscache_object *object = op->op.object;
-	struct fscache_cookie *cookie = object->cookie;
+	struct fscache_cookie *cookie;
 	struct page *page;
 	unsigned n;
 	void *results[1];
@@ -529,16 +681,19 @@
 
 	_enter("{OP%x,%d}", op->op.debug_id, atomic_read(&op->op.usage));
 
-	spin_lock(&cookie->lock);
-	spin_lock(&object->lock);
+	fscache_set_op_state(&op->op, "GetPage");
 
-	if (!fscache_object_is_active(object)) {
+	spin_lock(&object->lock);
+	cookie = object->cookie;
+
+	if (!fscache_object_is_active(object) || !cookie) {
 		spin_unlock(&object->lock);
-		spin_unlock(&cookie->lock);
 		_leave("");
 		return;
 	}
 
+	spin_lock(&cookie->stores_lock);
+
 	fscache_stat(&fscache_n_store_calls);
 
 	/* find a page to store */
@@ -549,23 +704,35 @@
 		goto superseded;
 	page = results[0];
 	_debug("gang %d [%lx]", n, page->index);
-	if (page->index > op->store_limit)
+	if (page->index > op->store_limit) {
+		fscache_stat(&fscache_n_store_pages_over_limit);
 		goto superseded;
-
-	radix_tree_tag_clear(&cookie->stores, page->index,
-			     FSCACHE_COOKIE_PENDING_TAG);
-
-	spin_unlock(&object->lock);
-	spin_unlock(&cookie->lock);
+	}
 
 	if (page) {
+		radix_tree_tag_set(&cookie->stores, page->index,
+				   FSCACHE_COOKIE_STORING_TAG);
+		radix_tree_tag_clear(&cookie->stores, page->index,
+				     FSCACHE_COOKIE_PENDING_TAG);
+	}
+
+	spin_unlock(&cookie->stores_lock);
+	spin_unlock(&object->lock);
+
+	if (page) {
+		fscache_set_op_state(&op->op, "Store");
+		fscache_stat(&fscache_n_store_pages);
+		fscache_stat(&fscache_n_cop_write_page);
 		ret = object->cache->ops->write_page(op, page);
-		fscache_end_page_write(cookie, page);
-		page_cache_release(page);
-		if (ret < 0)
+		fscache_stat_d(&fscache_n_cop_write_page);
+		fscache_set_op_state(&op->op, "EndWrite");
+		fscache_end_page_write(object, page);
+		if (ret < 0) {
+			fscache_set_op_state(&op->op, "Abort");
 			fscache_abort_object(object);
-		else
+		} else {
 			fscache_enqueue_operation(&op->op);
+		}
 	}
 
 	_leave("");
@@ -575,9 +742,9 @@
 	/* this writer is going away and there aren't any more things to
 	 * write */
 	_debug("cease");
+	spin_unlock(&cookie->stores_lock);
 	clear_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags);
 	spin_unlock(&object->lock);
-	spin_unlock(&cookie->lock);
 	_leave("");
 }
 
@@ -634,6 +801,7 @@
 	fscache_operation_init(&op->op, fscache_release_write_op);
 	fscache_operation_init_slow(&op->op, fscache_write_op);
 	op->op.flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_WAITING);
+	fscache_set_op_name(&op->op, "Write1");
 
 	ret = radix_tree_preload(gfp & ~__GFP_HIGHMEM);
 	if (ret < 0)
@@ -652,6 +820,7 @@
 	/* add the page to the pending-storage radix tree on the backing
 	 * object */
 	spin_lock(&object->lock);
+	spin_lock(&cookie->stores_lock);
 
 	_debug("store limit %llx", (unsigned long long) object->store_limit);
 
@@ -672,6 +841,7 @@
 	if (test_and_set_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags))
 		goto already_pending;
 
+	spin_unlock(&cookie->stores_lock);
 	spin_unlock(&object->lock);
 
 	op->op.debug_id	= atomic_inc_return(&fscache_op_debug_id);
@@ -693,6 +863,7 @@
 already_queued:
 	fscache_stat(&fscache_n_stores_again);
 already_pending:
+	spin_unlock(&cookie->stores_lock);
 	spin_unlock(&object->lock);
 	spin_unlock(&cookie->lock);
 	radix_tree_preload_end();
@@ -702,7 +873,9 @@
 	return 0;
 
 submit_failed:
+	spin_lock(&cookie->stores_lock);
 	radix_tree_delete(&cookie->stores, page->index);
+	spin_unlock(&cookie->stores_lock);
 	page_cache_release(page);
 	ret = -ENOBUFS;
 	goto nobufs;
@@ -763,7 +936,9 @@
 	if (TestClearPageFsCache(page) &&
 	    object->cache->ops->uncache_page) {
 		/* the cache backend releases the cookie lock */
+		fscache_stat(&fscache_n_cop_uncache_page);
 		object->cache->ops->uncache_page(object, page);
+		fscache_stat_d(&fscache_n_cop_uncache_page);
 		goto done;
 	}
 
diff --git a/fs/fscache/proc.c b/fs/fscache/proc.c
index beeab44..1d9e495 100644
--- a/fs/fscache/proc.c
+++ b/fs/fscache/proc.c
@@ -37,10 +37,20 @@
 		goto error_histogram;
 #endif
 
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+	if (!proc_create("fs/fscache/objects", S_IFREG | 0444, NULL,
+			 &fscache_objlist_fops))
+		goto error_objects;
+#endif
+
 	_leave(" = 0");
 	return 0;
 
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+error_objects:
+#endif
 #ifdef CONFIG_FSCACHE_HISTOGRAM
+	remove_proc_entry("fs/fscache/histogram", NULL);
 error_histogram:
 #endif
 #ifdef CONFIG_FSCACHE_STATS
@@ -58,6 +68,9 @@
  */
 void fscache_proc_cleanup(void)
 {
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+	remove_proc_entry("fs/fscache/objects", NULL);
+#endif
 #ifdef CONFIG_FSCACHE_HISTOGRAM
 	remove_proc_entry("fs/fscache/histogram", NULL);
 #endif
diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c
index 65deb99..46435f3a 100644
--- a/fs/fscache/stats.c
+++ b/fs/fscache/stats.c
@@ -25,6 +25,8 @@
 atomic_t fscache_n_op_deferred_release;
 atomic_t fscache_n_op_release;
 atomic_t fscache_n_op_gc;
+atomic_t fscache_n_op_cancelled;
+atomic_t fscache_n_op_rejected;
 
 atomic_t fscache_n_attr_changed;
 atomic_t fscache_n_attr_changed_ok;
@@ -36,6 +38,8 @@
 atomic_t fscache_n_allocs_ok;
 atomic_t fscache_n_allocs_wait;
 atomic_t fscache_n_allocs_nobufs;
+atomic_t fscache_n_allocs_intr;
+atomic_t fscache_n_allocs_object_dead;
 atomic_t fscache_n_alloc_ops;
 atomic_t fscache_n_alloc_op_waits;
 
@@ -46,6 +50,7 @@
 atomic_t fscache_n_retrievals_nobufs;
 atomic_t fscache_n_retrievals_intr;
 atomic_t fscache_n_retrievals_nomem;
+atomic_t fscache_n_retrievals_object_dead;
 atomic_t fscache_n_retrieval_ops;
 atomic_t fscache_n_retrieval_op_waits;
 
@@ -56,6 +61,14 @@
 atomic_t fscache_n_stores_oom;
 atomic_t fscache_n_store_ops;
 atomic_t fscache_n_store_calls;
+atomic_t fscache_n_store_pages;
+atomic_t fscache_n_store_radix_deletes;
+atomic_t fscache_n_store_pages_over_limit;
+
+atomic_t fscache_n_store_vmscan_not_storing;
+atomic_t fscache_n_store_vmscan_gone;
+atomic_t fscache_n_store_vmscan_busy;
+atomic_t fscache_n_store_vmscan_cancelled;
 
 atomic_t fscache_n_marks;
 atomic_t fscache_n_uncaches;
@@ -74,6 +87,7 @@
 atomic_t fscache_n_relinquishes;
 atomic_t fscache_n_relinquishes_null;
 atomic_t fscache_n_relinquishes_waitcrt;
+atomic_t fscache_n_relinquishes_retire;
 
 atomic_t fscache_n_cookie_index;
 atomic_t fscache_n_cookie_data;
@@ -84,6 +98,7 @@
 atomic_t fscache_n_object_lookups;
 atomic_t fscache_n_object_lookups_negative;
 atomic_t fscache_n_object_lookups_positive;
+atomic_t fscache_n_object_lookups_timed_out;
 atomic_t fscache_n_object_created;
 atomic_t fscache_n_object_avail;
 atomic_t fscache_n_object_dead;
@@ -93,6 +108,23 @@
 atomic_t fscache_n_checkaux_update;
 atomic_t fscache_n_checkaux_obsolete;
 
+atomic_t fscache_n_cop_alloc_object;
+atomic_t fscache_n_cop_lookup_object;
+atomic_t fscache_n_cop_lookup_complete;
+atomic_t fscache_n_cop_grab_object;
+atomic_t fscache_n_cop_update_object;
+atomic_t fscache_n_cop_drop_object;
+atomic_t fscache_n_cop_put_object;
+atomic_t fscache_n_cop_sync_cache;
+atomic_t fscache_n_cop_attr_changed;
+atomic_t fscache_n_cop_read_or_alloc_page;
+atomic_t fscache_n_cop_read_or_alloc_pages;
+atomic_t fscache_n_cop_allocate_page;
+atomic_t fscache_n_cop_allocate_pages;
+atomic_t fscache_n_cop_write_page;
+atomic_t fscache_n_cop_uncache_page;
+atomic_t fscache_n_cop_dissociate_pages;
+
 /*
  * display the general statistics
  */
@@ -129,10 +161,11 @@
 		   atomic_read(&fscache_n_acquires_nobufs),
 		   atomic_read(&fscache_n_acquires_oom));
 
-	seq_printf(m, "Lookups: n=%u neg=%u pos=%u crt=%u\n",
+	seq_printf(m, "Lookups: n=%u neg=%u pos=%u crt=%u tmo=%u\n",
 		   atomic_read(&fscache_n_object_lookups),
 		   atomic_read(&fscache_n_object_lookups_negative),
 		   atomic_read(&fscache_n_object_lookups_positive),
+		   atomic_read(&fscache_n_object_lookups_timed_out),
 		   atomic_read(&fscache_n_object_created));
 
 	seq_printf(m, "Updates: n=%u nul=%u run=%u\n",
@@ -140,10 +173,11 @@
 		   atomic_read(&fscache_n_updates_null),
 		   atomic_read(&fscache_n_updates_run));
 
-	seq_printf(m, "Relinqs: n=%u nul=%u wcr=%u\n",
+	seq_printf(m, "Relinqs: n=%u nul=%u wcr=%u rtr=%u\n",
 		   atomic_read(&fscache_n_relinquishes),
 		   atomic_read(&fscache_n_relinquishes_null),
-		   atomic_read(&fscache_n_relinquishes_waitcrt));
+		   atomic_read(&fscache_n_relinquishes_waitcrt),
+		   atomic_read(&fscache_n_relinquishes_retire));
 
 	seq_printf(m, "AttrChg: n=%u ok=%u nbf=%u oom=%u run=%u\n",
 		   atomic_read(&fscache_n_attr_changed),
@@ -152,14 +186,16 @@
 		   atomic_read(&fscache_n_attr_changed_nomem),
 		   atomic_read(&fscache_n_attr_changed_calls));
 
-	seq_printf(m, "Allocs : n=%u ok=%u wt=%u nbf=%u\n",
+	seq_printf(m, "Allocs : n=%u ok=%u wt=%u nbf=%u int=%u\n",
 		   atomic_read(&fscache_n_allocs),
 		   atomic_read(&fscache_n_allocs_ok),
 		   atomic_read(&fscache_n_allocs_wait),
-		   atomic_read(&fscache_n_allocs_nobufs));
-	seq_printf(m, "Allocs : ops=%u owt=%u\n",
+		   atomic_read(&fscache_n_allocs_nobufs),
+		   atomic_read(&fscache_n_allocs_intr));
+	seq_printf(m, "Allocs : ops=%u owt=%u abt=%u\n",
 		   atomic_read(&fscache_n_alloc_ops),
-		   atomic_read(&fscache_n_alloc_op_waits));
+		   atomic_read(&fscache_n_alloc_op_waits),
+		   atomic_read(&fscache_n_allocs_object_dead));
 
 	seq_printf(m, "Retrvls: n=%u ok=%u wt=%u nod=%u nbf=%u"
 		   " int=%u oom=%u\n",
@@ -170,9 +206,10 @@
 		   atomic_read(&fscache_n_retrievals_nobufs),
 		   atomic_read(&fscache_n_retrievals_intr),
 		   atomic_read(&fscache_n_retrievals_nomem));
-	seq_printf(m, "Retrvls: ops=%u owt=%u\n",
+	seq_printf(m, "Retrvls: ops=%u owt=%u abt=%u\n",
 		   atomic_read(&fscache_n_retrieval_ops),
-		   atomic_read(&fscache_n_retrieval_op_waits));
+		   atomic_read(&fscache_n_retrieval_op_waits),
+		   atomic_read(&fscache_n_retrievals_object_dead));
 
 	seq_printf(m, "Stores : n=%u ok=%u agn=%u nbf=%u oom=%u\n",
 		   atomic_read(&fscache_n_stores),
@@ -180,18 +217,49 @@
 		   atomic_read(&fscache_n_stores_again),
 		   atomic_read(&fscache_n_stores_nobufs),
 		   atomic_read(&fscache_n_stores_oom));
-	seq_printf(m, "Stores : ops=%u run=%u\n",
+	seq_printf(m, "Stores : ops=%u run=%u pgs=%u rxd=%u olm=%u\n",
 		   atomic_read(&fscache_n_store_ops),
-		   atomic_read(&fscache_n_store_calls));
+		   atomic_read(&fscache_n_store_calls),
+		   atomic_read(&fscache_n_store_pages),
+		   atomic_read(&fscache_n_store_radix_deletes),
+		   atomic_read(&fscache_n_store_pages_over_limit));
 
-	seq_printf(m, "Ops    : pend=%u run=%u enq=%u\n",
+	seq_printf(m, "VmScan : nos=%u gon=%u bsy=%u can=%u\n",
+		   atomic_read(&fscache_n_store_vmscan_not_storing),
+		   atomic_read(&fscache_n_store_vmscan_gone),
+		   atomic_read(&fscache_n_store_vmscan_busy),
+		   atomic_read(&fscache_n_store_vmscan_cancelled));
+
+	seq_printf(m, "Ops    : pend=%u run=%u enq=%u can=%u rej=%u\n",
 		   atomic_read(&fscache_n_op_pend),
 		   atomic_read(&fscache_n_op_run),
-		   atomic_read(&fscache_n_op_enqueue));
+		   atomic_read(&fscache_n_op_enqueue),
+		   atomic_read(&fscache_n_op_cancelled),
+		   atomic_read(&fscache_n_op_rejected));
 	seq_printf(m, "Ops    : dfr=%u rel=%u gc=%u\n",
 		   atomic_read(&fscache_n_op_deferred_release),
 		   atomic_read(&fscache_n_op_release),
 		   atomic_read(&fscache_n_op_gc));
+
+	seq_printf(m, "CacheOp: alo=%d luo=%d luc=%d gro=%d\n",
+		   atomic_read(&fscache_n_cop_alloc_object),
+		   atomic_read(&fscache_n_cop_lookup_object),
+		   atomic_read(&fscache_n_cop_lookup_complete),
+		   atomic_read(&fscache_n_cop_grab_object));
+	seq_printf(m, "CacheOp: upo=%d dro=%d pto=%d atc=%d syn=%d\n",
+		   atomic_read(&fscache_n_cop_update_object),
+		   atomic_read(&fscache_n_cop_drop_object),
+		   atomic_read(&fscache_n_cop_put_object),
+		   atomic_read(&fscache_n_cop_attr_changed),
+		   atomic_read(&fscache_n_cop_sync_cache));
+	seq_printf(m, "CacheOp: rap=%d ras=%d alp=%d als=%d wrp=%d ucp=%d dsp=%d\n",
+		   atomic_read(&fscache_n_cop_read_or_alloc_page),
+		   atomic_read(&fscache_n_cop_read_or_alloc_pages),
+		   atomic_read(&fscache_n_cop_allocate_page),
+		   atomic_read(&fscache_n_cop_allocate_pages),
+		   atomic_read(&fscache_n_cop_write_page),
+		   atomic_read(&fscache_n_cop_uncache_page),
+		   atomic_read(&fscache_n_cop_dissociate_pages));
 	return 0;
 }
 
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 8ada78a..4787ae6 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -385,6 +385,9 @@
 	if (fc->no_create)
 		return -ENOSYS;
 
+	if (flags & O_DIRECT)
+		return -EINVAL;
+
 	forget_req = fuse_get_req(fc);
 	if (IS_ERR(forget_req))
 		return PTR_ERR(forget_req);
diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig
index 5971359..4dcddf8 100644
--- a/fs/gfs2/Kconfig
+++ b/fs/gfs2/Kconfig
@@ -8,6 +8,8 @@
 	select FS_POSIX_ACL
 	select CRC32
 	select SLOW_WORK
+	select QUOTA
+	select QUOTACTL
 	help
 	  A cluster filesystem.
 
diff --git a/fs/gfs2/acl.c b/fs/gfs2/acl.c
index 3fc4e3a..3eb1ea8 100644
--- a/fs/gfs2/acl.c
+++ b/fs/gfs2/acl.c
@@ -12,6 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/completion.h>
 #include <linux/buffer_head.h>
+#include <linux/xattr.h>
 #include <linux/posix_acl.h>
 #include <linux/posix_acl_xattr.h>
 #include <linux/gfs2_ondisk.h>
@@ -26,108 +27,44 @@
 #include "trans.h"
 #include "util.h"
 
-#define ACL_ACCESS 1
-#define ACL_DEFAULT 0
+static const char *gfs2_acl_name(int type)
+{
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		return GFS2_POSIX_ACL_ACCESS;
+	case ACL_TYPE_DEFAULT:
+		return GFS2_POSIX_ACL_DEFAULT;
+	}
+	return NULL;
+}
 
-int gfs2_acl_validate_set(struct gfs2_inode *ip, int access,
-			  struct gfs2_ea_request *er, int *remove, mode_t *mode)
+static struct posix_acl *gfs2_acl_get(struct gfs2_inode *ip, int type)
 {
 	struct posix_acl *acl;
-	int error;
-
-	error = gfs2_acl_validate_remove(ip, access);
-	if (error)
-		return error;
-
-	if (!er->er_data)
-		return -EINVAL;
-
-	acl = posix_acl_from_xattr(er->er_data, er->er_data_len);
-	if (IS_ERR(acl))
-		return PTR_ERR(acl);
-	if (!acl) {
-		*remove = 1;
-		return 0;
-	}
-
-	error = posix_acl_valid(acl);
-	if (error)
-		goto out;
-
-	if (access) {
-		error = posix_acl_equiv_mode(acl, mode);
-		if (!error)
-			*remove = 1;
-		else if (error > 0)
-			error = 0;
-	}
-
-out:
-	posix_acl_release(acl);
-	return error;
-}
-
-int gfs2_acl_validate_remove(struct gfs2_inode *ip, int access)
-{
-	if (!GFS2_SB(&ip->i_inode)->sd_args.ar_posix_acl)
-		return -EOPNOTSUPP;
-	if (!is_owner_or_cap(&ip->i_inode))
-		return -EPERM;
-	if (S_ISLNK(ip->i_inode.i_mode))
-		return -EOPNOTSUPP;
-	if (!access && !S_ISDIR(ip->i_inode.i_mode))
-		return -EACCES;
-
-	return 0;
-}
-
-static int acl_get(struct gfs2_inode *ip, const char *name,
-		   struct posix_acl **acl, struct gfs2_ea_location *el,
-		   char **datap, unsigned int *lenp)
-{
+	const char *name;
 	char *data;
-	unsigned int len;
-	int error;
-
-	el->el_bh = NULL;
+	int len;
 
 	if (!ip->i_eattr)
-		return 0;
+		return NULL;
 
-	error = gfs2_ea_find(ip, GFS2_EATYPE_SYS, name, el);
-	if (error)
-		return error;
-	if (!el->el_ea)
-		return 0;
-	if (!GFS2_EA_DATA_LEN(el->el_ea))
-		goto out;
+	acl = get_cached_acl(&ip->i_inode, type);
+	if (acl != ACL_NOT_CACHED)
+		return acl;
 
-	len = GFS2_EA_DATA_LEN(el->el_ea);
-	data = kmalloc(len, GFP_NOFS);
-	error = -ENOMEM;
-	if (!data)
-		goto out;
+	name = gfs2_acl_name(type);
+	if (name == NULL)
+		return ERR_PTR(-EINVAL);
 
-	error = gfs2_ea_get_copy(ip, el, data, len);
-	if (error < 0)
-		goto out_kfree;
-	error = 0;
+	len = gfs2_xattr_acl_get(ip, name, &data);
+	if (len < 0)
+		return ERR_PTR(len);
+	if (len == 0)
+		return NULL;
 
-	if (acl) {
-		*acl = posix_acl_from_xattr(data, len);
-		if (IS_ERR(*acl))
-			error = PTR_ERR(*acl);
-	}
-
-out_kfree:
-	if (error || !datap) {
-		kfree(data);
-	} else {
-		*datap = data;
-		*lenp = len;
-	}
-out:
-	return error;
+	acl = posix_acl_from_xattr(data, len);
+	kfree(data);
+	return acl;
 }
 
 /**
@@ -140,14 +77,12 @@
 
 int gfs2_check_acl(struct inode *inode, int mask)
 {
-	struct gfs2_ea_location el;
-	struct posix_acl *acl = NULL;
+	struct posix_acl *acl;
 	int error;
 
-	error = acl_get(GFS2_I(inode), GFS2_POSIX_ACL_ACCESS, &acl, &el, NULL, NULL);
-	brelse(el.el_bh);
-	if (error)
-		return error;
+	acl = gfs2_acl_get(GFS2_I(inode), ACL_TYPE_ACCESS);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
 
 	if (acl) {
 		error = posix_acl_permission(inode, acl, mask);
@@ -158,57 +93,75 @@
 	return -EAGAIN;
 }
 
-static int munge_mode(struct gfs2_inode *ip, mode_t mode)
+static int gfs2_set_mode(struct inode *inode, mode_t mode)
 {
-	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
-	struct buffer_head *dibh;
-	int error;
+	int error = 0;
 
-	error = gfs2_trans_begin(sdp, RES_DINODE, 0);
-	if (error)
-		return error;
+	if (mode != inode->i_mode) {
+		struct iattr iattr;
 
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-	if (!error) {
-		gfs2_assert_withdraw(sdp,
-				(ip->i_inode.i_mode & S_IFMT) == (mode & S_IFMT));
-		ip->i_inode.i_mode = mode;
-		gfs2_trans_add_bh(ip->i_gl, dibh, 1);
-		gfs2_dinode_out(ip, dibh->b_data);
-		brelse(dibh);
+		iattr.ia_valid = ATTR_MODE;
+		iattr.ia_mode = mode;
+
+		error = gfs2_setattr_simple(GFS2_I(inode), &iattr);
 	}
 
-	gfs2_trans_end(sdp);
-
-	return 0;
+	return error;
 }
 
-int gfs2_acl_create(struct gfs2_inode *dip, struct gfs2_inode *ip)
+static int gfs2_acl_set(struct inode *inode, int type, struct posix_acl *acl)
 {
-	struct gfs2_ea_location el;
-	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
-	struct posix_acl *acl = NULL, *clone;
-	mode_t mode = ip->i_inode.i_mode;
-	char *data = NULL;
-	unsigned int len;
 	int error;
+	int len;
+	char *data;
+	const char *name = gfs2_acl_name(type);
+
+	BUG_ON(name == NULL);
+	len = posix_acl_to_xattr(acl, NULL, 0);
+	if (len == 0)
+		return 0;
+	data = kmalloc(len, GFP_NOFS);
+	if (data == NULL)
+		return -ENOMEM;
+	error = posix_acl_to_xattr(acl, data, len);
+	if (error < 0)
+		goto out;
+	error = gfs2_xattr_set(inode, GFS2_EATYPE_SYS, name, data, len, 0);
+	if (!error)
+		set_cached_acl(inode, type, acl);
+out:
+	kfree(data);
+	return error;
+}
+
+int gfs2_acl_create(struct gfs2_inode *dip, struct inode *inode)
+{
+	struct gfs2_sbd *sdp = GFS2_SB(&dip->i_inode);
+	struct posix_acl *acl, *clone;
+	mode_t mode = inode->i_mode;
+	int error = 0;
 
 	if (!sdp->sd_args.ar_posix_acl)
 		return 0;
-	if (S_ISLNK(ip->i_inode.i_mode))
+	if (S_ISLNK(inode->i_mode))
 		return 0;
 
-	error = acl_get(dip, GFS2_POSIX_ACL_DEFAULT, &acl, &el, &data, &len);
-	brelse(el.el_bh);
-	if (error)
-		return error;
+	acl = gfs2_acl_get(dip, ACL_TYPE_DEFAULT);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
 	if (!acl) {
 		mode &= ~current_umask();
-		if (mode != ip->i_inode.i_mode)
-			error = munge_mode(ip, mode);
+		if (mode != inode->i_mode)
+			error = gfs2_set_mode(inode, mode);
 		return error;
 	}
 
+	if (S_ISDIR(inode->i_mode)) {
+		error = gfs2_acl_set(inode, ACL_TYPE_DEFAULT, acl);
+		if (error)
+			goto out;
+	}
+
 	clone = posix_acl_clone(acl, GFP_NOFS);
 	error = -ENOMEM;
 	if (!clone)
@@ -216,43 +169,32 @@
 	posix_acl_release(acl);
 	acl = clone;
 
-	if (S_ISDIR(ip->i_inode.i_mode)) {
-		error = gfs2_xattr_set(&ip->i_inode, GFS2_EATYPE_SYS,
-				       GFS2_POSIX_ACL_DEFAULT, data, len, 0);
-		if (error)
-			goto out;
-	}
-
 	error = posix_acl_create_masq(acl, &mode);
 	if (error < 0)
 		goto out;
 	if (error == 0)
 		goto munge;
 
-	posix_acl_to_xattr(acl, data, len);
-	error = gfs2_xattr_set(&ip->i_inode, GFS2_EATYPE_SYS,
-			       GFS2_POSIX_ACL_ACCESS, data, len, 0);
+	error = gfs2_acl_set(inode, ACL_TYPE_ACCESS, acl);
 	if (error)
 		goto out;
 munge:
-	error = munge_mode(ip, mode);
+	error = gfs2_set_mode(inode, mode);
 out:
 	posix_acl_release(acl);
-	kfree(data);
 	return error;
 }
 
 int gfs2_acl_chmod(struct gfs2_inode *ip, struct iattr *attr)
 {
-	struct posix_acl *acl = NULL, *clone;
-	struct gfs2_ea_location el;
+	struct posix_acl *acl, *clone;
 	char *data;
 	unsigned int len;
 	int error;
 
-	error = acl_get(ip, GFS2_POSIX_ACL_ACCESS, &acl, &el, &data, &len);
-	if (error)
-		goto out_brelse;
+	acl = gfs2_acl_get(ip, ACL_TYPE_ACCESS);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
 	if (!acl)
 		return gfs2_setattr_simple(ip, attr);
 
@@ -265,15 +207,134 @@
 
 	error = posix_acl_chmod_masq(acl, attr->ia_mode);
 	if (!error) {
+		len = posix_acl_to_xattr(acl, NULL, 0);
+		data = kmalloc(len, GFP_NOFS);
+		error = -ENOMEM;
+		if (data == NULL)
+			goto out;
 		posix_acl_to_xattr(acl, data, len);
-		error = gfs2_ea_acl_chmod(ip, &el, attr, data);
+		error = gfs2_xattr_acl_chmod(ip, attr, data);
+		kfree(data);
+		set_cached_acl(&ip->i_inode, ACL_TYPE_ACCESS, acl);
 	}
 
 out:
 	posix_acl_release(acl);
-	kfree(data);
-out_brelse:
-	brelse(el.el_bh);
 	return error;
 }
 
+static int gfs2_acl_type(const char *name)
+{
+	if (strcmp(name, GFS2_POSIX_ACL_ACCESS) == 0)
+		return ACL_TYPE_ACCESS;
+	if (strcmp(name, GFS2_POSIX_ACL_DEFAULT) == 0)
+		return ACL_TYPE_DEFAULT;
+	return -EINVAL;
+}
+
+static int gfs2_xattr_system_get(struct inode *inode, const char *name,
+				 void *buffer, size_t size)
+{
+	struct posix_acl *acl;
+	int type;
+	int error;
+
+	type = gfs2_acl_type(name);
+	if (type < 0)
+		return type;
+
+	acl = gfs2_acl_get(GFS2_I(inode), type);
+	if (IS_ERR(acl))
+		return PTR_ERR(acl);
+	if (acl == NULL)
+		return -ENODATA;
+
+	error = posix_acl_to_xattr(acl, buffer, size);
+	posix_acl_release(acl);
+
+	return error;
+}
+
+static int gfs2_xattr_system_set(struct inode *inode, const char *name,
+				 const void *value, size_t size, int flags)
+{
+	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct posix_acl *acl = NULL;
+	int error = 0, type;
+
+	if (!sdp->sd_args.ar_posix_acl)
+		return -EOPNOTSUPP;
+
+	type = gfs2_acl_type(name);
+	if (type < 0)
+		return type;
+	if (flags & XATTR_CREATE)
+		return -EINVAL;
+	if (type == ACL_TYPE_DEFAULT && !S_ISDIR(inode->i_mode))
+		return value ? -EACCES : 0;
+	if ((current_fsuid() != inode->i_uid) && !capable(CAP_FOWNER))
+		return -EPERM;
+	if (S_ISLNK(inode->i_mode))
+		return -EOPNOTSUPP;
+
+	if (!value)
+		goto set_acl;
+
+	acl = posix_acl_from_xattr(value, size);
+	if (!acl) {
+		/*
+		 * acl_set_file(3) may request that we set default ACLs with
+		 * zero length -- defend (gracefully) against that here.
+		 */
+		goto out;
+	}
+	if (IS_ERR(acl)) {
+		error = PTR_ERR(acl);
+		goto out;
+	}
+
+	error = posix_acl_valid(acl);
+	if (error)
+		goto out_release;
+
+	error = -EINVAL;
+	if (acl->a_count > GFS2_ACL_MAX_ENTRIES)
+		goto out_release;
+
+	if (type == ACL_TYPE_ACCESS) {
+		mode_t mode = inode->i_mode;
+		error = posix_acl_equiv_mode(acl, &mode);
+
+		if (error <= 0) {
+			posix_acl_release(acl);
+			acl = NULL;
+
+			if (error < 0)
+				return error;
+		}
+
+		error = gfs2_set_mode(inode, mode);
+		if (error)
+			goto out_release;
+	}
+
+set_acl:
+	error = gfs2_xattr_set(inode, GFS2_EATYPE_SYS, name, value, size, 0);
+	if (!error) {
+		if (acl)
+			set_cached_acl(inode, type, acl);
+		else
+			forget_cached_acl(inode, type);
+	}
+out_release:
+	posix_acl_release(acl);
+out:
+	return error;
+}
+
+struct xattr_handler gfs2_xattr_system_handler = {
+	.prefix = XATTR_SYSTEM_PREFIX,
+	.get    = gfs2_xattr_system_get,
+	.set    = gfs2_xattr_system_set,
+};
+
diff --git a/fs/gfs2/acl.h b/fs/gfs2/acl.h
index 6751930..9306a2e 100644
--- a/fs/gfs2/acl.h
+++ b/fs/gfs2/acl.h
@@ -13,26 +13,12 @@
 #include "incore.h"
 
 #define GFS2_POSIX_ACL_ACCESS		"posix_acl_access"
-#define GFS2_POSIX_ACL_ACCESS_LEN	16
 #define GFS2_POSIX_ACL_DEFAULT		"posix_acl_default"
-#define GFS2_POSIX_ACL_DEFAULT_LEN	17
+#define GFS2_ACL_MAX_ENTRIES		25
 
-#define GFS2_ACL_IS_ACCESS(name, len) \
-         ((len) == GFS2_POSIX_ACL_ACCESS_LEN && \
-         !memcmp(GFS2_POSIX_ACL_ACCESS, (name), (len)))
-
-#define GFS2_ACL_IS_DEFAULT(name, len) \
-         ((len) == GFS2_POSIX_ACL_DEFAULT_LEN && \
-         !memcmp(GFS2_POSIX_ACL_DEFAULT, (name), (len)))
-
-struct gfs2_ea_request;
-
-int gfs2_acl_validate_set(struct gfs2_inode *ip, int access,
-			  struct gfs2_ea_request *er,
-			  int *remove, mode_t *mode);
-int gfs2_acl_validate_remove(struct gfs2_inode *ip, int access);
-int gfs2_check_acl(struct inode *inode, int mask);
-int gfs2_acl_create(struct gfs2_inode *dip, struct gfs2_inode *ip);
-int gfs2_acl_chmod(struct gfs2_inode *ip, struct iattr *attr);
+extern int gfs2_check_acl(struct inode *inode, int mask);
+extern int gfs2_acl_create(struct gfs2_inode *dip, struct inode *inode);
+extern int gfs2_acl_chmod(struct gfs2_inode *ip, struct iattr *attr);
+extern struct xattr_handler gfs2_xattr_system_handler;
 
 #endif /* __ACL_DOT_H__ */
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 694b5d4..7b8da94 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -269,7 +269,6 @@
 	pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT;
 	unsigned offset = i_size & (PAGE_CACHE_SIZE-1);
 	unsigned nrblocks = nr_pages * (PAGE_CACHE_SIZE/inode->i_sb->s_blocksize);
-	struct backing_dev_info *bdi = mapping->backing_dev_info;
 	int i;
 	int ret;
 
@@ -313,11 +312,6 @@
 
 		if (ret || (--(wbc->nr_to_write) <= 0))
 			ret = 1;
-		if (wbc->nonblocking && bdi_write_congested(bdi)) {
-			wbc->encountered_congestion = 1;
-			ret = 1;
-		}
-
 	}
 	gfs2_trans_end(sdp);
 	return ret;
@@ -338,7 +332,6 @@
 static int gfs2_write_cache_jdata(struct address_space *mapping,
 				  struct writeback_control *wbc)
 {
-	struct backing_dev_info *bdi = mapping->backing_dev_info;
 	int ret = 0;
 	int done = 0;
 	struct pagevec pvec;
@@ -348,11 +341,6 @@
 	int scanned = 0;
 	int range_whole = 0;
 
-	if (wbc->nonblocking && bdi_write_congested(bdi)) {
-		wbc->encountered_congestion = 1;
-		return 0;
-	}
-
 	pagevec_init(&pvec, 0);
 	if (wbc->range_cyclic) {
 		index = mapping->writeback_index; /* Start from prev offset */
@@ -819,8 +807,10 @@
 		mark_inode_dirty(inode);
 	}
 
-	if (inode == sdp->sd_rindex)
+	if (inode == sdp->sd_rindex) {
 		adjust_fs_space(inode);
+		ip->i_gh.gh_flags |= GL_NOCACHE;
+	}
 
 	brelse(dibh);
 	gfs2_trans_end(sdp);
@@ -889,8 +879,10 @@
 		mark_inode_dirty(inode);
 	}
 
-	if (inode == sdp->sd_rindex)
+	if (inode == sdp->sd_rindex) {
 		adjust_fs_space(inode);
+		ip->i_gh.gh_flags |= GL_NOCACHE;
+	}
 
 	brelse(dibh);
 	gfs2_trans_end(sdp);
diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c
index 297d7e5..25fddc1 100644
--- a/fs/gfs2/dir.c
+++ b/fs/gfs2/dir.c
@@ -525,38 +525,6 @@
 	return ERR_PTR(-EIO);
 }
 
-
-/**
- * dirent_first - Return the first dirent
- * @dip: the directory
- * @bh: The buffer
- * @dent: Pointer to list of dirents
- *
- * return first dirent whether bh points to leaf or stuffed dinode
- *
- * Returns: IS_LEAF, IS_DINODE, or -errno
- */
-
-static int dirent_first(struct gfs2_inode *dip, struct buffer_head *bh,
-			struct gfs2_dirent **dent)
-{
-	struct gfs2_meta_header *h = (struct gfs2_meta_header *)bh->b_data;
-
-	if (be32_to_cpu(h->mh_type) == GFS2_METATYPE_LF) {
-		if (gfs2_meta_check(GFS2_SB(&dip->i_inode), bh))
-			return -EIO;
-		*dent = (struct gfs2_dirent *)(bh->b_data +
-					       sizeof(struct gfs2_leaf));
-		return IS_LEAF;
-	} else {
-		if (gfs2_metatype_check(GFS2_SB(&dip->i_inode), bh, GFS2_METATYPE_DI))
-			return -EIO;
-		*dent = (struct gfs2_dirent *)(bh->b_data +
-					       sizeof(struct gfs2_dinode));
-		return IS_DINODE;
-	}
-}
-
 static int dirent_check_reclen(struct gfs2_inode *dip,
 			       const struct gfs2_dirent *d, const void *end_p)
 {
@@ -1006,7 +974,7 @@
 	divider = (start + half_len) << (32 - dip->i_depth);
 
 	/*  Copy the entries  */
-	dirent_first(dip, obh, &dent);
+	dent = (struct gfs2_dirent *)(obh->b_data + sizeof(struct gfs2_leaf));
 
 	do {
 		next = dent;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 8b674b1..f455a03 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -241,15 +241,14 @@
 	int rv = 0;
 
 	write_lock(gl_lock_addr(gl->gl_hash));
-	if (atomic_dec_and_test(&gl->gl_ref)) {
+	if (atomic_dec_and_lock(&gl->gl_ref, &lru_lock)) {
 		hlist_del(&gl->gl_list);
-		write_unlock(gl_lock_addr(gl->gl_hash));
-		spin_lock(&lru_lock);
 		if (!list_empty(&gl->gl_lru)) {
 			list_del_init(&gl->gl_lru);
 			atomic_dec(&lru_count);
 		}
 		spin_unlock(&lru_lock);
+		write_unlock(gl_lock_addr(gl->gl_hash));
 		GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders));
 		glock_free(gl);
 		rv = 1;
@@ -513,7 +512,6 @@
 			GLOCK_BUG_ON(gl, 1);
 		}
 		spin_unlock(&gl->gl_spin);
-		gfs2_glock_put(gl);
 		return;
 	}
 
@@ -524,8 +522,6 @@
 		if (glops->go_xmote_bh) {
 			spin_unlock(&gl->gl_spin);
 			rv = glops->go_xmote_bh(gl, gh);
-			if (rv == -EAGAIN)
-				return;
 			spin_lock(&gl->gl_spin);
 			if (rv) {
 				do_error(gl, rv);
@@ -540,7 +536,6 @@
 	clear_bit(GLF_LOCK, &gl->gl_flags);
 out_locked:
 	spin_unlock(&gl->gl_spin);
-	gfs2_glock_put(gl);
 }
 
 static unsigned int gfs2_lm_lock(struct gfs2_sbd *sdp, void *lock,
@@ -600,7 +595,6 @@
 
 	if (!(ret & LM_OUT_ASYNC)) {
 		finish_xmote(gl, ret);
-		gfs2_glock_hold(gl);
 		if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 			gfs2_glock_put(gl);
 	} else {
@@ -672,12 +666,17 @@
 	return;
 
 out_sched:
+	clear_bit(GLF_LOCK, &gl->gl_flags);
+	smp_mb__after_clear_bit();
 	gfs2_glock_hold(gl);
 	if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 		gfs2_glock_put_nolock(gl);
+	return;
+
 out_unlock:
 	clear_bit(GLF_LOCK, &gl->gl_flags);
-	goto out;
+	smp_mb__after_clear_bit();
+	return;
 }
 
 static void delete_work_func(struct work_struct *work)
@@ -707,9 +706,12 @@
 {
 	unsigned long delay = 0;
 	struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_work.work);
+	int drop_ref = 0;
 
-	if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags))
+	if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
 		finish_xmote(gl, gl->gl_reply);
+		drop_ref = 1;
+	}
 	down_read(&gfs2_umount_flush_sem);
 	spin_lock(&gl->gl_spin);
 	if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
@@ -727,6 +729,8 @@
 	if (!delay ||
 	    queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
 		gfs2_glock_put(gl);
+	if (drop_ref)
+		gfs2_glock_put(gl);
 }
 
 /**
@@ -1361,10 +1365,6 @@
 		list_del_init(&gl->gl_lru);
 		atomic_dec(&lru_count);
 
-		/* Check if glock is about to be freed */
-		if (atomic_read(&gl->gl_ref) == 0)
-			continue;
-
 		/* Test for being demotable */
 		if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
 			gfs2_glock_hold(gl);
@@ -1375,10 +1375,11 @@
 				handle_callback(gl, LM_ST_UNLOCKED, 0);
 				nr--;
 			}
+			clear_bit(GLF_LOCK, &gl->gl_flags);
+			smp_mb__after_clear_bit();
 			if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 				gfs2_glock_put_nolock(gl);
 			spin_unlock(&gl->gl_spin);
-			clear_bit(GLF_LOCK, &gl->gl_flags);
 			spin_lock(&lru_lock);
 			continue;
 		}
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index c609894..13f0bd2 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -180,15 +180,6 @@
 	return gl->gl_state == LM_ST_SHARED;
 }
 
-static inline int gfs2_glock_is_blocking(struct gfs2_glock *gl)
-{
-	int ret;
-	spin_lock(&gl->gl_spin);
-	ret = test_bit(GLF_DEMOTE, &gl->gl_flags);
-	spin_unlock(&gl->gl_spin);
-	return ret;
-}
-
 int gfs2_glock_get(struct gfs2_sbd *sdp,
 		   u64 number, const struct gfs2_glock_operations *glops,
 		   int create, struct gfs2_glock **glp);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 6985eef..78554ac 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -13,6 +13,7 @@
 #include <linux/buffer_head.h>
 #include <linux/gfs2_ondisk.h>
 #include <linux/bio.h>
+#include <linux/posix_acl.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -184,8 +185,10 @@
 	if (flags & DIO_METADATA) {
 		struct address_space *mapping = gl->gl_aspace->i_mapping;
 		truncate_inode_pages(mapping, 0);
-		if (ip)
+		if (ip) {
 			set_bit(GIF_INVALID, &ip->i_flags);
+			forget_all_cached_acls(&ip->i_inode);
+		}
 	}
 
 	if (ip == GFS2_I(gl->gl_sbd->sd_rindex))
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 6edb423..4792200 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -429,7 +429,11 @@
 	unsigned int ar_meta:1;			/* mount metafs */
 	unsigned int ar_discard:1;		/* discard requests */
 	unsigned int ar_errors:2;               /* errors=withdraw | panic */
+	unsigned int ar_nobarrier:1;            /* do not send barriers */
 	int ar_commit;				/* Commit interval */
+	int ar_statfs_quantum;			/* The fast statfs interval */
+	int ar_quota_quantum;			/* The quota interval */
+	int ar_statfs_percent;			/* The % change to force sync */
 };
 
 struct gfs2_tune {
@@ -558,6 +562,7 @@
 	spinlock_t sd_statfs_spin;
 	struct gfs2_statfs_change_host sd_statfs_master;
 	struct gfs2_statfs_change_host sd_statfs_local;
+	int sd_statfs_force_sync;
 
 	/* Resource group stuff */
 
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index fb15d3b1..26ba2a4 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -871,7 +871,7 @@
 	if (error)
 		goto fail_gunlock2;
 
-	error = gfs2_acl_create(dip, GFS2_I(inode));
+	error = gfs2_acl_create(dip, inode);
 	if (error)
 		goto fail_gunlock2;
 
@@ -947,9 +947,7 @@
 
 	str->di_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
 	str->di_header.mh_type = cpu_to_be32(GFS2_METATYPE_DI);
-	str->di_header.__pad0 = 0;
 	str->di_header.mh_format = cpu_to_be32(GFS2_FORMAT_DI);
-	str->di_header.__pad1 = 0;
 	str->di_num.no_addr = cpu_to_be64(ip->i_no_addr);
 	str->di_num.no_formal_ino = cpu_to_be64(ip->i_no_formal_ino);
 	str->di_mode = cpu_to_be32(ip->i_inode.i_mode);
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 13c6237..4511b08 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -596,7 +596,9 @@
 	memset(lh, 0, sizeof(struct gfs2_log_header));
 	lh->lh_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
 	lh->lh_header.mh_type = cpu_to_be32(GFS2_METATYPE_LH);
+	lh->lh_header.__pad0 = cpu_to_be64(0);
 	lh->lh_header.mh_format = cpu_to_be32(GFS2_FORMAT_LH);
+	lh->lh_header.mh_jid = cpu_to_be32(sdp->sd_jdesc->jd_jid);
 	lh->lh_sequence = cpu_to_be64(sdp->sd_log_sequence++);
 	lh->lh_flags = cpu_to_be32(flags);
 	lh->lh_tail = cpu_to_be32(tail);
diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c
index 9969ff0..de97632 100644
--- a/fs/gfs2/lops.c
+++ b/fs/gfs2/lops.c
@@ -132,6 +132,7 @@
 static void buf_lo_add(struct gfs2_sbd *sdp, struct gfs2_log_element *le)
 {
 	struct gfs2_bufdata *bd = container_of(le, struct gfs2_bufdata, bd_le);
+	struct gfs2_meta_header *mh;
 	struct gfs2_trans *tr;
 
 	lock_buffer(bd->bd_bh);
@@ -148,6 +149,9 @@
 	set_bit(GLF_DIRTY, &bd->bd_gl->gl_flags);
 	gfs2_meta_check(sdp, bd->bd_bh);
 	gfs2_pin(sdp, bd->bd_bh);
+	mh = (struct gfs2_meta_header *)bd->bd_bh->b_data;
+	mh->__pad0 = cpu_to_be64(0);
+	mh->mh_jid = cpu_to_be32(sdp->sd_jdesc->jd_jid);
 	sdp->sd_log_num_buf++;
 	list_add(&le->le_list, &sdp->sd_log_le_buf);
 	tr->tr_num_buf_new++;
diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c
index eacd78a..5b31f77 100644
--- a/fs/gfs2/main.c
+++ b/fs/gfs2/main.c
@@ -114,7 +114,7 @@
 	if (error)
 		goto fail_unregister;
 
-	error = slow_work_register_user();
+	error = slow_work_register_user(THIS_MODULE);
 	if (error)
 		goto fail_slow;
 
@@ -163,7 +163,7 @@
 	gfs2_unregister_debugfs();
 	unregister_filesystem(&gfs2_fs_type);
 	unregister_filesystem(&gfs2meta_fs_type);
-	slow_work_unregister_user();
+	slow_work_unregister_user(THIS_MODULE);
 
 	kmem_cache_destroy(gfs2_quotad_cachep);
 	kmem_cache_destroy(gfs2_rgrpd_cachep);
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 52fb6c0..edfee24 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -18,6 +18,7 @@
 #include <linux/mount.h>
 #include <linux/gfs2_ondisk.h>
 #include <linux/slow-work.h>
+#include <linux/quotaops.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -62,13 +63,10 @@
 	gt->gt_quota_warn_period = 10;
 	gt->gt_quota_scale_num = 1;
 	gt->gt_quota_scale_den = 1;
-	gt->gt_quota_quantum = 60;
 	gt->gt_new_files_jdata = 0;
 	gt->gt_max_readahead = 1 << 18;
 	gt->gt_stall_secs = 600;
 	gt->gt_complain_secs = 10;
-	gt->gt_statfs_quantum = 30;
-	gt->gt_statfs_slow = 0;
 }
 
 static struct gfs2_sbd *init_sbd(struct super_block *sb)
@@ -1114,7 +1112,7 @@
  * Returns: errno
  */
 
-static int fill_super(struct super_block *sb, void *data, int silent)
+static int fill_super(struct super_block *sb, struct gfs2_args *args, int silent)
 {
 	struct gfs2_sbd *sdp;
 	struct gfs2_holder mount_gh;
@@ -1125,17 +1123,7 @@
 		printk(KERN_WARNING "GFS2: can't alloc struct gfs2_sbd\n");
 		return -ENOMEM;
 	}
-
-	sdp->sd_args.ar_quota = GFS2_QUOTA_DEFAULT;
-	sdp->sd_args.ar_data = GFS2_DATA_DEFAULT;
-	sdp->sd_args.ar_commit = 60;
-	sdp->sd_args.ar_errors = GFS2_ERRORS_DEFAULT;
-
-	error = gfs2_mount_args(sdp, &sdp->sd_args, data);
-	if (error) {
-		printk(KERN_WARNING "GFS2: can't parse mount arguments\n");
-		goto fail;
-	}
+	sdp->sd_args = *args;
 
 	if (sdp->sd_args.ar_spectator) {
                 sb->s_flags |= MS_RDONLY;
@@ -1143,11 +1131,15 @@
 	}
 	if (sdp->sd_args.ar_posix_acl)
 		sb->s_flags |= MS_POSIXACL;
+	if (sdp->sd_args.ar_nobarrier)
+		set_bit(SDF_NOBARRIERS, &sdp->sd_flags);
 
 	sb->s_magic = GFS2_MAGIC;
 	sb->s_op = &gfs2_super_ops;
 	sb->s_export_op = &gfs2_export_ops;
 	sb->s_xattr = gfs2_xattr_handlers;
+	sb->s_qcop = &gfs2_quotactl_ops;
+	sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE;
 	sb->s_time_gran = 1;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 
@@ -1160,6 +1152,15 @@
 	sdp->sd_fsb2bb = 1 << sdp->sd_fsb2bb_shift;
 
 	sdp->sd_tune.gt_log_flush_secs = sdp->sd_args.ar_commit;
+	sdp->sd_tune.gt_quota_quantum = sdp->sd_args.ar_quota_quantum;
+	if (sdp->sd_args.ar_statfs_quantum) {
+		sdp->sd_tune.gt_statfs_slow = 0;
+		sdp->sd_tune.gt_statfs_quantum = sdp->sd_args.ar_statfs_quantum;
+	}
+	else {
+		sdp->sd_tune.gt_statfs_slow = 1;
+		sdp->sd_tune.gt_statfs_quantum = 30;
+	}
 
 	error = init_names(sdp, silent);
 	if (error)
@@ -1243,18 +1244,127 @@
 	return error;
 }
 
-static int gfs2_get_sb(struct file_system_type *fs_type, int flags,
-		       const char *dev_name, void *data, struct vfsmount *mnt)
+static int set_gfs2_super(struct super_block *s, void *data)
 {
-	return get_sb_bdev(fs_type, flags, dev_name, data, fill_super, mnt);
+	s->s_bdev = data;
+	s->s_dev = s->s_bdev->bd_dev;
+
+	/*
+	 * We set the bdi here to the queue backing, file systems can
+	 * overwrite this in ->fill_super()
+	 */
+	s->s_bdi = &bdev_get_queue(s->s_bdev)->backing_dev_info;
+	return 0;
 }
 
-static int test_meta_super(struct super_block *s, void *ptr)
+static int test_gfs2_super(struct super_block *s, void *ptr)
 {
 	struct block_device *bdev = ptr;
 	return (bdev == s->s_bdev);
 }
 
+/**
+ * gfs2_get_sb - Get the GFS2 superblock
+ * @fs_type: The GFS2 filesystem type
+ * @flags: Mount flags
+ * @dev_name: The name of the device
+ * @data: The mount arguments
+ * @mnt: The vfsmnt for this mount
+ *
+ * Q. Why not use get_sb_bdev() ?
+ * A. We need to select one of two root directories to mount, independent
+ *    of whether this is the initial, or subsequent, mount of this sb
+ *
+ * Returns: 0 or -ve on error
+ */
+
+static int gfs2_get_sb(struct file_system_type *fs_type, int flags,
+		       const char *dev_name, void *data, struct vfsmount *mnt)
+{
+	struct block_device *bdev;
+	struct super_block *s;
+	fmode_t mode = FMODE_READ;
+	int error;
+	struct gfs2_args args;
+	struct gfs2_sbd *sdp;
+
+	if (!(flags & MS_RDONLY))
+		mode |= FMODE_WRITE;
+
+	bdev = open_bdev_exclusive(dev_name, mode, fs_type);
+	if (IS_ERR(bdev))
+		return PTR_ERR(bdev);
+
+	/*
+	 * once the super is inserted into the list by sget, s_umount
+	 * will protect the lockfs code from trying to start a snapshot
+	 * while we are mounting
+	 */
+	mutex_lock(&bdev->bd_fsfreeze_mutex);
+	if (bdev->bd_fsfreeze_count > 0) {
+		mutex_unlock(&bdev->bd_fsfreeze_mutex);
+		error = -EBUSY;
+		goto error_bdev;
+	}
+	s = sget(fs_type, test_gfs2_super, set_gfs2_super, bdev);
+	mutex_unlock(&bdev->bd_fsfreeze_mutex);
+	error = PTR_ERR(s);
+	if (IS_ERR(s))
+		goto error_bdev;
+
+	memset(&args, 0, sizeof(args));
+	args.ar_quota = GFS2_QUOTA_DEFAULT;
+	args.ar_data = GFS2_DATA_DEFAULT;
+	args.ar_commit = 60;
+	args.ar_statfs_quantum = 30;
+	args.ar_quota_quantum = 60;
+	args.ar_errors = GFS2_ERRORS_DEFAULT;
+
+	error = gfs2_mount_args(&args, data);
+	if (error) {
+		printk(KERN_WARNING "GFS2: can't parse mount arguments\n");
+		if (s->s_root)
+			goto error_super;
+		deactivate_locked_super(s);
+		return error;
+	}
+
+	if (s->s_root) {
+		error = -EBUSY;
+		if ((flags ^ s->s_flags) & MS_RDONLY)
+			goto error_super;
+		close_bdev_exclusive(bdev, mode);
+	} else {
+		char b[BDEVNAME_SIZE];
+
+		s->s_flags = flags;
+		s->s_mode = mode;
+		strlcpy(s->s_id, bdevname(bdev, b), sizeof(s->s_id));
+		sb_set_blocksize(s, block_size(bdev));
+		error = fill_super(s, &args, flags & MS_SILENT ? 1 : 0);
+		if (error) {
+			deactivate_locked_super(s);
+			return error;
+		}
+		s->s_flags |= MS_ACTIVE;
+		bdev->bd_super = s;
+	}
+
+	sdp = s->s_fs_info;
+	mnt->mnt_sb = s;
+	if (args.ar_meta)
+		mnt->mnt_root = dget(sdp->sd_master_dir);
+	else
+		mnt->mnt_root = dget(sdp->sd_root_dir);
+	return 0;
+
+error_super:
+	deactivate_locked_super(s);
+error_bdev:
+	close_bdev_exclusive(bdev, mode);
+	return error;
+}
+
 static int set_meta_super(struct super_block *s, void *ptr)
 {
 	return -EINVAL;
@@ -1274,13 +1384,17 @@
 		       dev_name, error);
 		return error;
 	}
-	s = sget(&gfs2_fs_type, test_meta_super, set_meta_super,
+	s = sget(&gfs2_fs_type, test_gfs2_super, set_meta_super,
 		 path.dentry->d_inode->i_sb->s_bdev);
 	path_put(&path);
 	if (IS_ERR(s)) {
 		printk(KERN_WARNING "GFS2: gfs2 mount does not exist\n");
 		return PTR_ERR(s);
 	}
+	if ((flags ^ s->s_flags) & MS_RDONLY) {
+		deactivate_locked_super(s);
+		return -EBUSY;
+	}
 	sdp = s->s_fs_info;
 	mnt->mnt_sb = s;
 	mnt->mnt_root = dget(sdp->sd_master_dir);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 2e9b932..e3bf6ea 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -15,7 +15,7 @@
  * fuzziness in the current usage value of IDs that are being used on different
  * nodes in the cluster simultaneously.  So, it is possible for a user on
  * multiple nodes to overrun their quota, but that overrun is controlable.
- * Since quota tags are part of transactions, there is no need to a quota check
+ * Since quota tags are part of transactions, there is no need for a quota check
  * program to be run on node crashes or anything like that.
  *
  * There are couple of knobs that let the administrator manage the quota
@@ -47,6 +47,8 @@
 #include <linux/gfs2_ondisk.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
+#include <linux/quota.h>
+#include <linux/dqblk_xfs.h>
 
 #include "gfs2.h"
 #include "incore.h"
@@ -65,13 +67,6 @@
 #define QUOTA_USER 1
 #define QUOTA_GROUP 0
 
-struct gfs2_quota_host {
-	u64 qu_limit;
-	u64 qu_warn;
-	s64 qu_value;
-	u32 qu_ll_next;
-};
-
 struct gfs2_quota_change_host {
 	u64 qc_change;
 	u32 qc_flags; /* GFS2_QCF_... */
@@ -164,7 +159,7 @@
 	return error;
 }
 
-static int qd_get(struct gfs2_sbd *sdp, int user, u32 id, int create,
+static int qd_get(struct gfs2_sbd *sdp, int user, u32 id,
 		  struct gfs2_quota_data **qdp)
 {
 	struct gfs2_quota_data *qd = NULL, *new_qd = NULL;
@@ -202,7 +197,7 @@
 
 		spin_unlock(&qd_lru_lock);
 
-		if (qd || !create) {
+		if (qd) {
 			if (new_qd) {
 				gfs2_glock_put(new_qd->qd_gl);
 				kmem_cache_free(gfs2_quotad_cachep, new_qd);
@@ -461,12 +456,12 @@
 	qd_put(qd);
 }
 
-static int qdsb_get(struct gfs2_sbd *sdp, int user, u32 id, int create,
+static int qdsb_get(struct gfs2_sbd *sdp, int user, u32 id,
 		    struct gfs2_quota_data **qdp)
 {
 	int error;
 
-	error = qd_get(sdp, user, id, create, qdp);
+	error = qd_get(sdp, user, id, qdp);
 	if (error)
 		return error;
 
@@ -508,20 +503,20 @@
 	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
 		return 0;
 
-	error = qdsb_get(sdp, QUOTA_USER, ip->i_inode.i_uid, CREATE, qd);
+	error = qdsb_get(sdp, QUOTA_USER, ip->i_inode.i_uid, qd);
 	if (error)
 		goto out;
 	al->al_qd_num++;
 	qd++;
 
-	error = qdsb_get(sdp, QUOTA_GROUP, ip->i_inode.i_gid, CREATE, qd);
+	error = qdsb_get(sdp, QUOTA_GROUP, ip->i_inode.i_gid, qd);
 	if (error)
 		goto out;
 	al->al_qd_num++;
 	qd++;
 
 	if (uid != NO_QUOTA_CHANGE && uid != ip->i_inode.i_uid) {
-		error = qdsb_get(sdp, QUOTA_USER, uid, CREATE, qd);
+		error = qdsb_get(sdp, QUOTA_USER, uid, qd);
 		if (error)
 			goto out;
 		al->al_qd_num++;
@@ -529,7 +524,7 @@
 	}
 
 	if (gid != NO_QUOTA_CHANGE && gid != ip->i_inode.i_gid) {
-		error = qdsb_get(sdp, QUOTA_GROUP, gid, CREATE, qd);
+		error = qdsb_get(sdp, QUOTA_GROUP, gid, qd);
 		if (error)
 			goto out;
 		al->al_qd_num++;
@@ -617,48 +612,36 @@
 	mutex_unlock(&sdp->sd_quota_mutex);
 }
 
-static void gfs2_quota_in(struct gfs2_quota_host *qu, const void *buf)
-{
-	const struct gfs2_quota *str = buf;
-
-	qu->qu_limit = be64_to_cpu(str->qu_limit);
-	qu->qu_warn = be64_to_cpu(str->qu_warn);
-	qu->qu_value = be64_to_cpu(str->qu_value);
-	qu->qu_ll_next = be32_to_cpu(str->qu_ll_next);
-}
-
-static void gfs2_quota_out(const struct gfs2_quota_host *qu, void *buf)
-{
-	struct gfs2_quota *str = buf;
-
-	str->qu_limit = cpu_to_be64(qu->qu_limit);
-	str->qu_warn = cpu_to_be64(qu->qu_warn);
-	str->qu_value = cpu_to_be64(qu->qu_value);
-	str->qu_ll_next = cpu_to_be32(qu->qu_ll_next);
-	memset(&str->qu_reserved, 0, sizeof(str->qu_reserved));
-}
-
 /**
- * gfs2_adjust_quota
+ * gfs2_adjust_quota - adjust record of current block usage
+ * @ip: The quota inode
+ * @loc: Offset of the entry in the quota file
+ * @change: The amount of usage change to record
+ * @qd: The quota data
+ * @fdq: The updated limits to record
  *
  * This function was mostly borrowed from gfs2_block_truncate_page which was
  * in turn mostly borrowed from ext3
+ *
+ * Returns: 0 or -ve on error
  */
+
 static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc,
-			     s64 change, struct gfs2_quota_data *qd)
+			     s64 change, struct gfs2_quota_data *qd,
+			     struct fs_disk_quota *fdq)
 {
 	struct inode *inode = &ip->i_inode;
 	struct address_space *mapping = inode->i_mapping;
 	unsigned long index = loc >> PAGE_CACHE_SHIFT;
 	unsigned offset = loc & (PAGE_CACHE_SIZE - 1);
 	unsigned blocksize, iblock, pos;
-	struct buffer_head *bh;
+	struct buffer_head *bh, *dibh;
 	struct page *page;
 	void *kaddr;
-	char *ptr;
-	struct gfs2_quota_host qp;
+	struct gfs2_quota *qp;
 	s64 value;
 	int err = -EIO;
+	u64 size;
 
 	if (gfs2_is_stuffed(ip))
 		gfs2_unstuff_dinode(ip, NULL);
@@ -700,18 +683,38 @@
 	gfs2_trans_add_bh(ip->i_gl, bh, 0);
 
 	kaddr = kmap_atomic(page, KM_USER0);
-	ptr = kaddr + offset;
-	gfs2_quota_in(&qp, ptr);
-	qp.qu_value += change;
-	value = qp.qu_value;
-	gfs2_quota_out(&qp, ptr);
+	qp = kaddr + offset;
+	value = (s64)be64_to_cpu(qp->qu_value) + change;
+	qp->qu_value = cpu_to_be64(value);
+	qd->qd_qb.qb_value = qp->qu_value;
+	if (fdq) {
+		if (fdq->d_fieldmask & FS_DQ_BSOFT) {
+			qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit);
+			qd->qd_qb.qb_warn = qp->qu_warn;
+		}
+		if (fdq->d_fieldmask & FS_DQ_BHARD) {
+			qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit);
+			qd->qd_qb.qb_limit = qp->qu_limit;
+		}
+	}
 	flush_dcache_page(page);
 	kunmap_atomic(kaddr, KM_USER0);
-	err = 0;
-	qd->qd_qb.qb_magic = cpu_to_be32(GFS2_MAGIC);
-	qd->qd_qb.qb_value = cpu_to_be64(value);
-	((struct gfs2_quota_lvb*)(qd->qd_gl->gl_lvb))->qb_magic = cpu_to_be32(GFS2_MAGIC);
-	((struct gfs2_quota_lvb*)(qd->qd_gl->gl_lvb))->qb_value = cpu_to_be64(value);
+
+	err = gfs2_meta_inode_buffer(ip, &dibh);
+	if (err)
+		goto unlock;
+
+	size = loc + sizeof(struct gfs2_quota);
+	if (size > inode->i_size) {
+		ip->i_disksize = size;
+		i_size_write(inode, size);
+	}
+	inode->i_mtime = inode->i_atime = CURRENT_TIME;
+	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+	gfs2_dinode_out(ip, dibh->b_data);
+	brelse(dibh);
+	mark_inode_dirty(inode);
+
 unlock:
 	unlock_page(page);
 	page_cache_release(page);
@@ -739,9 +742,9 @@
 		return -ENOMEM;
 
 	sort(qda, num_qd, sizeof(struct gfs2_quota_data *), sort_qd, NULL);
+	mutex_lock_nested(&ip->i_inode.i_mutex, I_MUTEX_QUOTA);
 	for (qx = 0; qx < num_qd; qx++) {
-		error = gfs2_glock_nq_init(qda[qx]->qd_gl,
-					   LM_ST_EXCLUSIVE,
+		error = gfs2_glock_nq_init(qda[qx]->qd_gl, LM_ST_EXCLUSIVE,
 					   GL_NOCACHE, &ghs[qx]);
 		if (error)
 			goto out;
@@ -795,9 +798,7 @@
 	for (x = 0; x < num_qd; x++) {
 		qd = qda[x];
 		offset = qd2offset(qd);
-		error = gfs2_adjust_quota(ip, offset, qd->qd_change_sync,
-					  (struct gfs2_quota_data *)
-					  qd);
+		error = gfs2_adjust_quota(ip, offset, qd->qd_change_sync, qd, NULL);
 		if (error)
 			goto out_end_trans;
 
@@ -817,21 +818,44 @@
 out:
 	while (qx--)
 		gfs2_glock_dq_uninit(&ghs[qx]);
+	mutex_unlock(&ip->i_inode.i_mutex);
 	kfree(ghs);
 	gfs2_log_flush(ip->i_gl->gl_sbd, ip->i_gl);
 	return error;
 }
 
+static int update_qd(struct gfs2_sbd *sdp, struct gfs2_quota_data *qd)
+{
+	struct gfs2_inode *ip = GFS2_I(sdp->sd_quota_inode);
+	struct gfs2_quota q;
+	struct gfs2_quota_lvb *qlvb;
+	loff_t pos;
+	int error;
+
+	memset(&q, 0, sizeof(struct gfs2_quota));
+	pos = qd2offset(qd);
+	error = gfs2_internal_read(ip, NULL, (char *)&q, &pos, sizeof(q));
+	if (error < 0)
+		return error;
+
+	qlvb = (struct gfs2_quota_lvb *)qd->qd_gl->gl_lvb;
+	qlvb->qb_magic = cpu_to_be32(GFS2_MAGIC);
+	qlvb->__pad = 0;
+	qlvb->qb_limit = q.qu_limit;
+	qlvb->qb_warn = q.qu_warn;
+	qlvb->qb_value = q.qu_value;
+	qd->qd_qb = *qlvb;
+
+	return 0;
+}
+
 static int do_glock(struct gfs2_quota_data *qd, int force_refresh,
 		    struct gfs2_holder *q_gh)
 {
 	struct gfs2_sbd *sdp = qd->qd_gl->gl_sbd;
 	struct gfs2_inode *ip = GFS2_I(sdp->sd_quota_inode);
 	struct gfs2_holder i_gh;
-	struct gfs2_quota_host q;
-	char buf[sizeof(struct gfs2_quota)];
 	int error;
-	struct gfs2_quota_lvb *qlvb;
 
 restart:
 	error = gfs2_glock_nq_init(qd->qd_gl, LM_ST_SHARED, 0, q_gh);
@@ -841,11 +865,9 @@
 	qd->qd_qb = *(struct gfs2_quota_lvb *)qd->qd_gl->gl_lvb;
 
 	if (force_refresh || qd->qd_qb.qb_magic != cpu_to_be32(GFS2_MAGIC)) {
-		loff_t pos;
 		gfs2_glock_dq_uninit(q_gh);
-		error = gfs2_glock_nq_init(qd->qd_gl,
-					   LM_ST_EXCLUSIVE, GL_NOCACHE,
-					   q_gh);
+		error = gfs2_glock_nq_init(qd->qd_gl, LM_ST_EXCLUSIVE,
+					   GL_NOCACHE, q_gh);
 		if (error)
 			return error;
 
@@ -853,29 +875,14 @@
 		if (error)
 			goto fail;
 
-		memset(buf, 0, sizeof(struct gfs2_quota));
-		pos = qd2offset(qd);
-		error = gfs2_internal_read(ip, NULL, buf, &pos,
-					   sizeof(struct gfs2_quota));
-		if (error < 0)
+		error = update_qd(sdp, qd);
+		if (error)
 			goto fail_gunlock;
 
 		gfs2_glock_dq_uninit(&i_gh);
-
-		gfs2_quota_in(&q, buf);
-		qlvb = (struct gfs2_quota_lvb *)qd->qd_gl->gl_lvb;
-		qlvb->qb_magic = cpu_to_be32(GFS2_MAGIC);
-		qlvb->__pad = 0;
-		qlvb->qb_limit = cpu_to_be64(q.qu_limit);
-		qlvb->qb_warn = cpu_to_be64(q.qu_warn);
-		qlvb->qb_value = cpu_to_be64(q.qu_value);
-		qd->qd_qb = *qlvb;
-
-		if (gfs2_glock_is_blocking(qd->qd_gl)) {
-			gfs2_glock_dq_uninit(q_gh);
-			force_refresh = 0;
-			goto restart;
-		}
+		gfs2_glock_dq_uninit(q_gh);
+		force_refresh = 0;
+		goto restart;
 	}
 
 	return 0;
@@ -995,7 +1002,7 @@
 {
 	struct gfs2_sbd *sdp = qd->qd_gl->gl_sbd;
 
-	printk(KERN_INFO "GFS2: fsid=%s: quota %s for %s %u\r\n",
+	printk(KERN_INFO "GFS2: fsid=%s: quota %s for %s %u\n",
 	       sdp->sd_fsname, type,
 	       (test_bit(QDF_USER, &qd->qd_flags)) ? "user" : "group",
 	       qd->qd_id);
@@ -1032,6 +1039,10 @@
 
 		if (be64_to_cpu(qd->qd_qb.qb_limit) && (s64)be64_to_cpu(qd->qd_qb.qb_limit) < value) {
 			print_message(qd, "exceeded");
+			quota_send_warning(test_bit(QDF_USER, &qd->qd_flags) ?
+					   USRQUOTA : GRPQUOTA, qd->qd_id,
+					   sdp->sd_vfs->s_dev, QUOTA_NL_BHARDWARN);
+
 			error = -EDQUOT;
 			break;
 		} else if (be64_to_cpu(qd->qd_qb.qb_warn) &&
@@ -1039,6 +1050,9 @@
 			   time_after_eq(jiffies, qd->qd_last_warn +
 					 gfs2_tune_get(sdp,
 						gt_quota_warn_period) * HZ)) {
+			quota_send_warning(test_bit(QDF_USER, &qd->qd_flags) ?
+					   USRQUOTA : GRPQUOTA, qd->qd_id,
+					   sdp->sd_vfs->s_dev, QUOTA_NL_BSOFTWARN);
 			error = print_message(qd, "warning");
 			qd->qd_last_warn = jiffies;
 		}
@@ -1069,8 +1083,9 @@
 	}
 }
 
-int gfs2_quota_sync(struct gfs2_sbd *sdp)
+int gfs2_quota_sync(struct super_block *sb, int type)
 {
+	struct gfs2_sbd *sdp = sb->s_fs_info;
 	struct gfs2_quota_data **qda;
 	unsigned int max_qd = gfs2_tune_get(sdp, gt_quota_simul_sync);
 	unsigned int num_qd;
@@ -1118,7 +1133,7 @@
 	struct gfs2_holder q_gh;
 	int error;
 
-	error = qd_get(sdp, user, id, CREATE, &qd);
+	error = qd_get(sdp, user, id, &qd);
 	if (error)
 		return error;
 
@@ -1127,7 +1142,6 @@
 		gfs2_glock_dq_uninit(&q_gh);
 
 	qd_put(qd);
-
 	return error;
 }
 
@@ -1298,12 +1312,12 @@
 }
 
 static void quotad_check_timeo(struct gfs2_sbd *sdp, const char *msg,
-			       int (*fxn)(struct gfs2_sbd *sdp),
+			       int (*fxn)(struct super_block *sb, int type),
 			       unsigned long t, unsigned long *timeo,
 			       unsigned int *new_timeo)
 {
 	if (t >= *timeo) {
-		int error = fxn(sdp);
+		int error = fxn(sdp->sd_vfs, 0);
 		quotad_error(sdp, msg, error);
 		*timeo = gfs2_tune_get_i(&sdp->sd_tune, new_timeo) * HZ;
 	} else {
@@ -1330,6 +1344,14 @@
 	}
 }
 
+void gfs2_wake_up_statfs(struct gfs2_sbd *sdp) {
+	if (!sdp->sd_statfs_force_sync) {
+		sdp->sd_statfs_force_sync = 1;
+		wake_up(&sdp->sd_quota_wait);
+	}
+}
+
+
 /**
  * gfs2_quotad - Write cached quota changes into the quota file
  * @sdp: Pointer to GFS2 superblock
@@ -1349,8 +1371,15 @@
 	while (!kthread_should_stop()) {
 
 		/* Update the master statfs file */
-		quotad_check_timeo(sdp, "statfs", gfs2_statfs_sync, t,
-				   &statfs_timeo, &tune->gt_statfs_quantum);
+		if (sdp->sd_statfs_force_sync) {
+			int error = gfs2_statfs_sync(sdp->sd_vfs, 0);
+			quotad_error(sdp, "statfs", error);
+			statfs_timeo = gfs2_tune_get(sdp, gt_statfs_quantum) * HZ;
+		}
+		else
+			quotad_check_timeo(sdp, "statfs", gfs2_statfs_sync, t,
+				   	   &statfs_timeo,
+					   &tune->gt_statfs_quantum);
 
 		/* Update quota file */
 		quotad_check_timeo(sdp, "sync", gfs2_quota_sync, t,
@@ -1367,7 +1396,7 @@
 		spin_lock(&sdp->sd_trunc_lock);
 		empty = list_empty(&sdp->sd_trunc_list);
 		spin_unlock(&sdp->sd_trunc_lock);
-		if (empty)
+		if (empty && !sdp->sd_statfs_force_sync)
 			t -= schedule_timeout(t);
 		else
 			t = 0;
@@ -1377,3 +1406,181 @@
 	return 0;
 }
 
+static int gfs2_quota_get_xstate(struct super_block *sb,
+				 struct fs_quota_stat *fqs)
+{
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+
+	memset(fqs, 0, sizeof(struct fs_quota_stat));
+	fqs->qs_version = FS_QSTAT_VERSION;
+	if (sdp->sd_args.ar_quota == GFS2_QUOTA_ON)
+		fqs->qs_flags = (XFS_QUOTA_UDQ_ENFD | XFS_QUOTA_GDQ_ENFD);
+	else if (sdp->sd_args.ar_quota == GFS2_QUOTA_ACCOUNT)
+		fqs->qs_flags = (XFS_QUOTA_UDQ_ACCT | XFS_QUOTA_GDQ_ACCT);
+	if (sdp->sd_quota_inode) {
+		fqs->qs_uquota.qfs_ino = GFS2_I(sdp->sd_quota_inode)->i_no_addr;
+		fqs->qs_uquota.qfs_nblks = sdp->sd_quota_inode->i_blocks;
+	}
+	fqs->qs_uquota.qfs_nextents = 1; /* unsupported */
+	fqs->qs_gquota = fqs->qs_uquota; /* its the same inode in both cases */
+	fqs->qs_incoredqs = atomic_read(&qd_lru_count);
+	return 0;
+}
+
+static int gfs2_xquota_get(struct super_block *sb, int type, qid_t id,
+			   struct fs_disk_quota *fdq)
+{
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	struct gfs2_quota_lvb *qlvb;
+	struct gfs2_quota_data *qd;
+	struct gfs2_holder q_gh;
+	int error;
+
+	memset(fdq, 0, sizeof(struct fs_disk_quota));
+
+	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
+		return -ESRCH; /* Crazy XFS error code */
+
+	if (type == USRQUOTA)
+		type = QUOTA_USER;
+	else if (type == GRPQUOTA)
+		type = QUOTA_GROUP;
+	else
+		return -EINVAL;
+
+	error = qd_get(sdp, type, id, &qd);
+	if (error)
+		return error;
+	error = do_glock(qd, FORCE, &q_gh);
+	if (error)
+		goto out;
+
+	qlvb = (struct gfs2_quota_lvb *)qd->qd_gl->gl_lvb;
+	fdq->d_version = FS_DQUOT_VERSION;
+	fdq->d_flags = (type == QUOTA_USER) ? XFS_USER_QUOTA : XFS_GROUP_QUOTA;
+	fdq->d_id = id;
+	fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit);
+	fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn);
+	fdq->d_bcount = be64_to_cpu(qlvb->qb_value);
+
+	gfs2_glock_dq_uninit(&q_gh);
+out:
+	qd_put(qd);
+	return error;
+}
+
+/* GFS2 only supports a subset of the XFS fields */
+#define GFS2_FIELDMASK (FS_DQ_BSOFT|FS_DQ_BHARD)
+
+static int gfs2_xquota_set(struct super_block *sb, int type, qid_t id,
+			   struct fs_disk_quota *fdq)
+{
+	struct gfs2_sbd *sdp = sb->s_fs_info;
+	struct gfs2_inode *ip = GFS2_I(sdp->sd_quota_inode);
+	struct gfs2_quota_data *qd;
+	struct gfs2_holder q_gh, i_gh;
+	unsigned int data_blocks, ind_blocks;
+	unsigned int blocks = 0;
+	int alloc_required;
+	struct gfs2_alloc *al;
+	loff_t offset;
+	int error;
+
+	if (sdp->sd_args.ar_quota == GFS2_QUOTA_OFF)
+		return -ESRCH; /* Crazy XFS error code */
+
+	switch(type) {
+	case USRQUOTA:
+		type = QUOTA_USER;
+		if (fdq->d_flags != XFS_USER_QUOTA)
+			return -EINVAL;
+		break;
+	case GRPQUOTA:
+		type = QUOTA_GROUP;
+		if (fdq->d_flags != XFS_GROUP_QUOTA)
+			return -EINVAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (fdq->d_fieldmask & ~GFS2_FIELDMASK)
+		return -EINVAL;
+	if (fdq->d_id != id)
+		return -EINVAL;
+
+	error = qd_get(sdp, type, id, &qd);
+	if (error)
+		return error;
+
+	mutex_lock(&ip->i_inode.i_mutex);
+	error = gfs2_glock_nq_init(qd->qd_gl, LM_ST_EXCLUSIVE, 0, &q_gh);
+	if (error)
+		goto out_put;
+	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &i_gh);
+	if (error)
+		goto out_q;
+
+	/* Check for existing entry, if none then alloc new blocks */
+	error = update_qd(sdp, qd);
+	if (error)
+		goto out_i;
+
+	/* If nothing has changed, this is a no-op */
+	if ((fdq->d_fieldmask & FS_DQ_BSOFT) &&
+	    (fdq->d_blk_softlimit == be64_to_cpu(qd->qd_qb.qb_warn)))
+		fdq->d_fieldmask ^= FS_DQ_BSOFT;
+	if ((fdq->d_fieldmask & FS_DQ_BHARD) &&
+	    (fdq->d_blk_hardlimit == be64_to_cpu(qd->qd_qb.qb_limit)))
+		fdq->d_fieldmask ^= FS_DQ_BHARD;
+	if (fdq->d_fieldmask == 0)
+		goto out_i;
+
+	offset = qd2offset(qd);
+	error = gfs2_write_alloc_required(ip, offset, sizeof(struct gfs2_quota),
+					  &alloc_required);
+	if (error)
+		goto out_i;
+	if (alloc_required) {
+		al = gfs2_alloc_get(ip);
+		if (al == NULL)
+			goto out_i;
+		gfs2_write_calc_reserv(ip, sizeof(struct gfs2_quota),
+				       &data_blocks, &ind_blocks);
+		blocks = al->al_requested = 1 + data_blocks + ind_blocks;
+		error = gfs2_inplace_reserve(ip);
+		if (error)
+			goto out_alloc;
+	}
+
+	error = gfs2_trans_begin(sdp, blocks + RES_DINODE + 1, 0);
+	if (error)
+		goto out_release;
+
+	/* Apply changes */
+	error = gfs2_adjust_quota(ip, offset, 0, qd, fdq);
+
+	gfs2_trans_end(sdp);
+out_release:
+	if (alloc_required) {
+		gfs2_inplace_release(ip);
+out_alloc:
+		gfs2_alloc_put(ip);
+	}
+out_i:
+	gfs2_glock_dq_uninit(&i_gh);
+out_q:
+	gfs2_glock_dq_uninit(&q_gh);
+out_put:
+	mutex_unlock(&ip->i_inode.i_mutex);
+	qd_put(qd);
+	return error;
+}
+
+const struct quotactl_ops gfs2_quotactl_ops = {
+	.quota_sync     = gfs2_quota_sync,
+	.get_xstate     = gfs2_quota_get_xstate,
+	.get_xquota	= gfs2_xquota_get,
+	.set_xquota	= gfs2_xquota_set,
+};
+
diff --git a/fs/gfs2/quota.h b/fs/gfs2/quota.h
index 0fa5fa6..e271fa0 100644
--- a/fs/gfs2/quota.h
+++ b/fs/gfs2/quota.h
@@ -25,13 +25,15 @@
 extern void gfs2_quota_change(struct gfs2_inode *ip, s64 change,
 			      u32 uid, u32 gid);
 
-extern int gfs2_quota_sync(struct gfs2_sbd *sdp);
+extern int gfs2_quota_sync(struct super_block *sb, int type);
 extern int gfs2_quota_refresh(struct gfs2_sbd *sdp, int user, u32 id);
 
 extern int gfs2_quota_init(struct gfs2_sbd *sdp);
 extern void gfs2_quota_cleanup(struct gfs2_sbd *sdp);
 extern int gfs2_quotad(void *data);
 
+extern void gfs2_wake_up_statfs(struct gfs2_sbd *sdp);
+
 static inline int gfs2_quota_lock_check(struct gfs2_inode *ip)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
@@ -50,5 +52,6 @@
 }
 
 extern int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask);
+extern const struct quotactl_ops gfs2_quotactl_ops;
 
 #endif /* __QUOTA_DOT_H__ */
diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c
index 59d2695..4b9bece 100644
--- a/fs/gfs2/recovery.c
+++ b/fs/gfs2/recovery.c
@@ -7,6 +7,7 @@
  * of the GNU General Public License version 2.
  */
 
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/completion.h>
@@ -409,7 +410,9 @@
 	memset(lh, 0, sizeof(struct gfs2_log_header));
 	lh->lh_header.mh_magic = cpu_to_be32(GFS2_MAGIC);
 	lh->lh_header.mh_type = cpu_to_be32(GFS2_METATYPE_LH);
+	lh->lh_header.__pad0 = cpu_to_be64(0);
 	lh->lh_header.mh_format = cpu_to_be32(GFS2_FORMAT_LH);
+	lh->lh_header.mh_jid = cpu_to_be32(sdp->sd_jdesc->jd_jid);
 	lh->lh_sequence = cpu_to_be64(head->lh_sequence + 1);
 	lh->lh_flags = cpu_to_be32(GFS2_LOG_HEAD_UNMOUNT);
 	lh->lh_blkno = cpu_to_be32(lblock);
@@ -593,6 +596,7 @@
 }
 
 struct slow_work_ops gfs2_recover_ops = {
+	.owner	 = THIS_MODULE,
 	.get_ref = gfs2_recover_get_ref,
 	.put_ref = gfs2_recover_put_ref,
 	.execute = gfs2_recover_work,
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 8f1cfb0..0608f49 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1710,11 +1710,16 @@
 {
 	struct gfs2_rgrpd *rgd;
 	struct gfs2_holder ri_gh, rgd_gh;
+	struct gfs2_inode *ip = GFS2_I(sdp->sd_rindex);
+	int ri_locked = 0;
 	int error;
 
-	error = gfs2_rindex_hold(sdp, &ri_gh);
-	if (error)
-		goto fail;
+	if (!gfs2_glock_is_locked_by_me(ip->i_gl)) {
+		error = gfs2_rindex_hold(sdp, &ri_gh);
+		if (error)
+			goto fail;
+		ri_locked = 1;
+	}
 
 	error = -EINVAL;
 	rgd = gfs2_blk2rgrpd(sdp, no_addr);
@@ -1730,7 +1735,8 @@
 
 	gfs2_glock_dq_uninit(&rgd_gh);
 fail_rindex:
-	gfs2_glock_dq_uninit(&ri_gh);
+	if (ri_locked)
+		gfs2_glock_dq_uninit(&ri_gh);
 fail:
 	return error;
 }
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 0ec3ec6..c282ad4 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -70,6 +70,11 @@
 	Opt_commit,
 	Opt_err_withdraw,
 	Opt_err_panic,
+	Opt_statfs_quantum,
+	Opt_statfs_percent,
+	Opt_quota_quantum,
+	Opt_barrier,
+	Opt_nobarrier,
 	Opt_error,
 };
 
@@ -101,18 +106,23 @@
 	{Opt_commit, "commit=%d"},
 	{Opt_err_withdraw, "errors=withdraw"},
 	{Opt_err_panic, "errors=panic"},
+	{Opt_statfs_quantum, "statfs_quantum=%d"},
+	{Opt_statfs_percent, "statfs_percent=%d"},
+	{Opt_quota_quantum, "quota_quantum=%d"},
+	{Opt_barrier, "barrier"},
+	{Opt_nobarrier, "nobarrier"},
 	{Opt_error, NULL}
 };
 
 /**
  * gfs2_mount_args - Parse mount options
- * @sdp:
- * @data:
+ * @args: The structure into which the parsed options will be written
+ * @options: The options to parse
  *
  * Return: errno
  */
 
-int gfs2_mount_args(struct gfs2_sbd *sdp, struct gfs2_args *args, char *options)
+int gfs2_mount_args(struct gfs2_args *args, char *options)
 {
 	char *o;
 	int token;
@@ -157,7 +167,7 @@
 			break;
 		case Opt_debug:
 			if (args->ar_errors == GFS2_ERRORS_PANIC) {
-				fs_info(sdp, "-o debug and -o errors=panic "
+				printk(KERN_WARNING "GFS2: -o debug and -o errors=panic "
 				       "are mutually exclusive.\n");
 				return -EINVAL;
 			}
@@ -210,7 +220,29 @@
 		case Opt_commit:
 			rv = match_int(&tmp[0], &args->ar_commit);
 			if (rv || args->ar_commit <= 0) {
-				fs_info(sdp, "commit mount option requires a positive numeric argument\n");
+				printk(KERN_WARNING "GFS2: commit mount option requires a positive numeric argument\n");
+				return rv ? rv : -EINVAL;
+			}
+			break;
+		case Opt_statfs_quantum:
+			rv = match_int(&tmp[0], &args->ar_statfs_quantum);
+			if (rv || args->ar_statfs_quantum < 0) {
+				printk(KERN_WARNING "GFS2: statfs_quantum mount option requires a non-negative numeric argument\n");
+				return rv ? rv : -EINVAL;
+			}
+			break;
+		case Opt_quota_quantum:
+			rv = match_int(&tmp[0], &args->ar_quota_quantum);
+			if (rv || args->ar_quota_quantum <= 0) {
+				printk(KERN_WARNING "GFS2: quota_quantum mount option requires a positive numeric argument\n");
+				return rv ? rv : -EINVAL;
+			}
+			break;
+		case Opt_statfs_percent:
+			rv = match_int(&tmp[0], &args->ar_statfs_percent);
+			if (rv || args->ar_statfs_percent < 0 ||
+			    args->ar_statfs_percent > 100) {
+				printk(KERN_WARNING "statfs_percent mount option requires a numeric argument between 0 and 100\n");
 				return rv ? rv : -EINVAL;
 			}
 			break;
@@ -219,15 +251,21 @@
 			break;
 		case Opt_err_panic:
 			if (args->ar_debug) {
-				fs_info(sdp, "-o debug and -o errors=panic "
+				printk(KERN_WARNING "GFS2: -o debug and -o errors=panic "
 					"are mutually exclusive.\n");
 				return -EINVAL;
 			}
 			args->ar_errors = GFS2_ERRORS_PANIC;
 			break;
+		case Opt_barrier:
+			args->ar_nobarrier = 0;
+			break;
+		case Opt_nobarrier:
+			args->ar_nobarrier = 1;
+			break;
 		case Opt_error:
 		default:
-			fs_info(sdp, "invalid mount option: %s\n", o);
+			printk(KERN_WARNING "GFS2: invalid mount option: %s\n", o);
 			return -EINVAL;
 		}
 	}
@@ -442,7 +480,10 @@
 {
 	struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
 	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
 	struct buffer_head *l_bh;
+	s64 x, y;
+	int need_sync = 0;
 	int error;
 
 	error = gfs2_meta_inode_buffer(l_ip, &l_bh);
@@ -456,9 +497,17 @@
 	l_sc->sc_free += free;
 	l_sc->sc_dinodes += dinodes;
 	gfs2_statfs_change_out(l_sc, l_bh->b_data + sizeof(struct gfs2_dinode));
+	if (sdp->sd_args.ar_statfs_percent) {
+		x = 100 * l_sc->sc_free;
+		y = m_sc->sc_free * sdp->sd_args.ar_statfs_percent;
+		if (x >= y || x <= -y)
+			need_sync = 1;
+	}
 	spin_unlock(&sdp->sd_statfs_spin);
 
 	brelse(l_bh);
+	if (need_sync)
+		gfs2_wake_up_statfs(sdp);
 }
 
 void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
@@ -484,8 +533,9 @@
 	gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
 }
 
-int gfs2_statfs_sync(struct gfs2_sbd *sdp)
+int gfs2_statfs_sync(struct super_block *sb, int type)
 {
+	struct gfs2_sbd *sdp = sb->s_fs_info;
 	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
 	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
@@ -521,6 +571,7 @@
 		goto out_bh2;
 
 	update_statfs(sdp, m_bh, l_bh);
+	sdp->sd_statfs_force_sync = 0;
 
 	gfs2_trans_end(sdp);
 
@@ -712,8 +763,8 @@
 	int error;
 
 	flush_workqueue(gfs2_delete_workqueue);
-	gfs2_quota_sync(sdp);
-	gfs2_statfs_sync(sdp);
+	gfs2_quota_sync(sdp->sd_vfs, 0);
+	gfs2_statfs_sync(sdp->sd_vfs, 0);
 
 	error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, GL_NOCACHE,
 				   &t_gh);
@@ -1061,8 +1112,13 @@
 
 	spin_lock(&gt->gt_spin);
 	args.ar_commit = gt->gt_log_flush_secs;
+	args.ar_quota_quantum = gt->gt_quota_quantum;
+	if (gt->gt_statfs_slow)
+		args.ar_statfs_quantum = 0;
+	else
+		args.ar_statfs_quantum = gt->gt_statfs_quantum;
 	spin_unlock(&gt->gt_spin);
-	error = gfs2_mount_args(sdp, &args, data);
+	error = gfs2_mount_args(&args, data);
 	if (error)
 		return error;
 
@@ -1097,8 +1153,21 @@
 		sb->s_flags |= MS_POSIXACL;
 	else
 		sb->s_flags &= ~MS_POSIXACL;
+	if (sdp->sd_args.ar_nobarrier)
+		set_bit(SDF_NOBARRIERS, &sdp->sd_flags);
+	else
+		clear_bit(SDF_NOBARRIERS, &sdp->sd_flags);
 	spin_lock(&gt->gt_spin);
 	gt->gt_log_flush_secs = args.ar_commit;
+	gt->gt_quota_quantum = args.ar_quota_quantum;
+	if (args.ar_statfs_quantum) {
+		gt->gt_statfs_slow = 0;
+		gt->gt_statfs_quantum = args.ar_statfs_quantum;
+	}
+	else {
+		gt->gt_statfs_slow = 1;
+		gt->gt_statfs_quantum = 30;
+	}
 	spin_unlock(&gt->gt_spin);
 
 	gfs2_online_uevent(sdp);
@@ -1179,7 +1248,7 @@
 {
 	struct gfs2_sbd *sdp = mnt->mnt_sb->s_fs_info;
 	struct gfs2_args *args = &sdp->sd_args;
-	int lfsecs;
+	int val;
 
 	if (is_ancestor(mnt->mnt_root, sdp->sd_master_dir))
 		seq_printf(s, ",meta");
@@ -1240,9 +1309,17 @@
 	}
 	if (args->ar_discard)
 		seq_printf(s, ",discard");
-	lfsecs = sdp->sd_tune.gt_log_flush_secs;
-	if (lfsecs != 60)
-		seq_printf(s, ",commit=%d", lfsecs);
+	val = sdp->sd_tune.gt_log_flush_secs;
+	if (val != 60)
+		seq_printf(s, ",commit=%d", val);
+	val = sdp->sd_tune.gt_statfs_quantum;
+	if (val != 30)
+		seq_printf(s, ",statfs_quantum=%d", val);
+	val = sdp->sd_tune.gt_quota_quantum;
+	if (val != 60)
+		seq_printf(s, ",quota_quantum=%d", val);
+	if (args->ar_statfs_percent)
+		seq_printf(s, ",statfs_percent=%d", args->ar_statfs_percent);
 	if (args->ar_errors != GFS2_ERRORS_DEFAULT) {
 		const char *state;
 
@@ -1259,6 +1336,9 @@
 		}
 		seq_printf(s, ",errors=%s", state);
 	}
+	if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
+		seq_printf(s, ",nobarrier");
+
 	return 0;
 }
 
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index 235db36..3df60f2 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -27,7 +27,7 @@
 
 extern void gfs2_jindex_free(struct gfs2_sbd *sdp);
 
-extern int gfs2_mount_args(struct gfs2_sbd *sdp, struct gfs2_args *args, char *data);
+extern int gfs2_mount_args(struct gfs2_args *args, char *data);
 
 extern struct gfs2_jdesc *gfs2_jdesc_find(struct gfs2_sbd *sdp, unsigned int jid);
 extern int gfs2_jdesc_check(struct gfs2_jdesc *jd);
@@ -44,7 +44,7 @@
 				  const void *buf);
 extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
 			  struct buffer_head *l_bh);
-extern int gfs2_statfs_sync(struct gfs2_sbd *sdp);
+extern int gfs2_statfs_sync(struct super_block *sb, int type);
 
 extern int gfs2_freeze_fs(struct gfs2_sbd *sdp);
 extern void gfs2_unfreeze_fs(struct gfs2_sbd *sdp);
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index 4463297..c5dad1e 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -158,7 +158,7 @@
 	if (simple_strtol(buf, NULL, 0) != 1)
 		return -EINVAL;
 
-	gfs2_statfs_sync(sdp);
+	gfs2_statfs_sync(sdp->sd_vfs, 0);
 	return len;
 }
 
@@ -171,13 +171,14 @@
 	if (simple_strtol(buf, NULL, 0) != 1)
 		return -EINVAL;
 
-	gfs2_quota_sync(sdp);
+	gfs2_quota_sync(sdp->sd_vfs, 0);
 	return len;
 }
 
 static ssize_t quota_refresh_user_store(struct gfs2_sbd *sdp, const char *buf,
 					size_t len)
 {
+	int error;
 	u32 id;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -185,13 +186,14 @@
 
 	id = simple_strtoul(buf, NULL, 0);
 
-	gfs2_quota_refresh(sdp, 1, id);
-	return len;
+	error = gfs2_quota_refresh(sdp, 1, id);
+	return error ? error : len;
 }
 
 static ssize_t quota_refresh_group_store(struct gfs2_sbd *sdp, const char *buf,
 					 size_t len)
 {
+	int error;
 	u32 id;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -199,8 +201,8 @@
 
 	id = simple_strtoul(buf, NULL, 0);
 
-	gfs2_quota_refresh(sdp, 0, id);
-	return len;
+	error = gfs2_quota_refresh(sdp, 0, id);
+	return error ? error : len;
 }
 
 static ssize_t demote_rq_store(struct gfs2_sbd *sdp, const char *buf, size_t len)
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
index 8a0f8ef..912f5cb 100644
--- a/fs/gfs2/xattr.c
+++ b/fs/gfs2/xattr.c
@@ -186,8 +186,8 @@
 	return 0;
 }
 
-int gfs2_ea_find(struct gfs2_inode *ip, int type, const char *name,
-		 struct gfs2_ea_location *el)
+static int gfs2_ea_find(struct gfs2_inode *ip, int type, const char *name,
+			struct gfs2_ea_location *el)
 {
 	struct ea_find ef;
 	int error;
@@ -516,8 +516,8 @@
 	return error;
 }
 
-int gfs2_ea_get_copy(struct gfs2_inode *ip, struct gfs2_ea_location *el,
-		     char *data, size_t size)
+static int gfs2_ea_get_copy(struct gfs2_inode *ip, struct gfs2_ea_location *el,
+			    char *data, size_t size)
 {
 	int ret;
 	size_t len = GFS2_EA_DATA_LEN(el->el_ea);
@@ -534,6 +534,36 @@
 	return len;
 }
 
+int gfs2_xattr_acl_get(struct gfs2_inode *ip, const char *name, char **ppdata)
+{
+	struct gfs2_ea_location el;
+	int error;
+	int len;
+	char *data;
+
+	error = gfs2_ea_find(ip, GFS2_EATYPE_SYS, name, &el);
+	if (error)
+		return error;
+	if (!el.el_ea)
+		goto out;
+	if (!GFS2_EA_DATA_LEN(el.el_ea))
+		goto out;
+
+	len = GFS2_EA_DATA_LEN(el.el_ea);
+	data = kmalloc(len, GFP_NOFS);
+	error = -ENOMEM;
+	if (data == NULL)
+		goto out;
+
+	error = gfs2_ea_get_copy(ip, &el, data, len);
+	if (error == 0)
+		error = len;
+	*ppdata = data;
+out:
+	brelse(el.el_bh);
+	return error;
+}
+
 /**
  * gfs2_xattr_get - Get a GFS2 extended attribute
  * @inode: The inode
@@ -1259,22 +1289,26 @@
 	return error;
 }
 
-int gfs2_ea_acl_chmod(struct gfs2_inode *ip, struct gfs2_ea_location *el,
-		      struct iattr *attr, char *data)
+int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
 {
+	struct gfs2_ea_location el;
 	struct buffer_head *dibh;
 	int error;
 
-	if (GFS2_EA_IS_STUFFED(el->el_ea)) {
+	error = gfs2_ea_find(ip, GFS2_EATYPE_SYS, GFS2_POSIX_ACL_ACCESS, &el);
+	if (error)
+		return error;
+
+	if (GFS2_EA_IS_STUFFED(el.el_ea)) {
 		error = gfs2_trans_begin(GFS2_SB(&ip->i_inode), RES_DINODE + RES_EATTR, 0);
 		if (error)
 			return error;
 
-		gfs2_trans_add_bh(ip->i_gl, el->el_bh, 1);
-		memcpy(GFS2_EA2DATA(el->el_ea), data,
-		       GFS2_EA_DATA_LEN(el->el_ea));
+		gfs2_trans_add_bh(ip->i_gl, el.el_bh, 1);
+		memcpy(GFS2_EA2DATA(el.el_ea), data,
+		       GFS2_EA_DATA_LEN(el.el_ea));
 	} else
-		error = ea_acl_chmod_unstuffed(ip, el->el_ea, data);
+		error = ea_acl_chmod_unstuffed(ip, el.el_ea, data);
 
 	if (error)
 		return error;
@@ -1507,18 +1541,6 @@
 	return gfs2_xattr_set(inode, GFS2_EATYPE_USR, name, value, size, flags);
 }
 
-static int gfs2_xattr_system_get(struct inode *inode, const char *name,
-				 void *buffer, size_t size)
-{
-	return gfs2_xattr_get(inode, GFS2_EATYPE_SYS, name, buffer, size);
-}
-
-static int gfs2_xattr_system_set(struct inode *inode, const char *name,
-				 const void *value, size_t size, int flags)
-{
-	return gfs2_xattr_set(inode, GFS2_EATYPE_SYS, name, value, size, flags);
-}
-
 static int gfs2_xattr_security_get(struct inode *inode, const char *name,
 				   void *buffer, size_t size)
 {
@@ -1543,12 +1565,6 @@
 	.set    = gfs2_xattr_security_set,
 };
 
-static struct xattr_handler gfs2_xattr_system_handler = {
-	.prefix = XATTR_SYSTEM_PREFIX,
-	.get    = gfs2_xattr_system_get,
-	.set    = gfs2_xattr_system_set,
-};
-
 struct xattr_handler *gfs2_xattr_handlers[] = {
 	&gfs2_xattr_user_handler,
 	&gfs2_xattr_security_handler,
diff --git a/fs/gfs2/xattr.h b/fs/gfs2/xattr.h
index cbdfd77..8d6ae58 100644
--- a/fs/gfs2/xattr.h
+++ b/fs/gfs2/xattr.h
@@ -62,11 +62,7 @@
 
 /* Exported to acl.c */
 
-extern int gfs2_ea_find(struct gfs2_inode *ip, int type, const char *name,
-			struct gfs2_ea_location *el);
-extern int gfs2_ea_get_copy(struct gfs2_inode *ip, struct gfs2_ea_location *el,
-			    char *data, size_t size);
-extern int gfs2_ea_acl_chmod(struct gfs2_inode *ip, struct gfs2_ea_location *el,
-			     struct iattr *attr, char *data);
+extern int gfs2_xattr_acl_get(struct gfs2_inode *ip, const char *name, char **data);
+extern int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data);
 
 #endif /* __EATTR_DOT_H__ */
diff --git a/fs/inode.c b/fs/inode.c
index 4d8e3be..06c1f02 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -18,7 +18,6 @@
 #include <linux/hash.h>
 #include <linux/swap.h>
 #include <linux/security.h>
-#include <linux/ima.h>
 #include <linux/pagemap.h>
 #include <linux/cdev.h>
 #include <linux/bootmem.h>
@@ -157,11 +156,6 @@
 
 	if (security_inode_alloc(inode))
 		goto out;
-
-	/* allocate and initialize an i_integrity */
-	if (ima_inode_alloc(inode))
-		goto out_free_security;
-
 	spin_lock_init(&inode->i_lock);
 	lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key);
 
@@ -201,9 +195,6 @@
 #endif
 
 	return 0;
-
-out_free_security:
-	security_inode_free(inode);
 out:
 	return -ENOMEM;
 }
@@ -235,7 +226,6 @@
 void __destroy_inode(struct inode *inode)
 {
 	BUG_ON(inode_has_buffers(inode));
-	ima_inode_free(inode);
 	security_inode_free(inode);
 	fsnotify_inode_delete(inode);
 #ifdef CONFIG_FS_POSIX_ACL
diff --git a/fs/jffs2/read.c b/fs/jffs2/read.c
index cfe05c1..3f39be1 100644
--- a/fs/jffs2/read.c
+++ b/fs/jffs2/read.c
@@ -164,12 +164,15 @@
 
 	/* XXX FIXME: Where a single physical node actually shows up in two
 	   frags, we read it twice. Don't do that. */
-	/* Now we're pointing at the first frag which overlaps our page */
+	/* Now we're pointing at the first frag which overlaps our page
+	 * (or perhaps is before it, if we've been asked to read off the
+	 * end of the file). */
 	while(offset < end) {
 		D2(printk(KERN_DEBUG "jffs2_read_inode_range: offset %d, end %d\n", offset, end));
-		if (unlikely(!frag || frag->ofs > offset)) {
+		if (unlikely(!frag || frag->ofs > offset ||
+			     frag->ofs + frag->size <= offset)) {
 			uint32_t holesize = end - offset;
-			if (frag) {
+			if (frag && frag->ofs > offset) {
 				D1(printk(KERN_NOTICE "Eep. Hole in ino #%u fraglist. frag->ofs = 0x%08x, offset = 0x%08x\n", f->inocache->ino, frag->ofs, offset));
 				holesize = min(holesize, frag->ofs - offset);
 			}
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index 1a54ae1..e50cfa3 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -371,82 +371,74 @@
 
 static ctl_table nlm_sysctls[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nlm_grace_period",
 		.data		= &nlm_grace_period,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= proc_doulongvec_minmax,
 		.extra1		= (unsigned long *) &nlm_grace_period_min,
 		.extra2		= (unsigned long *) &nlm_grace_period_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nlm_timeout",
 		.data		= &nlm_timeout,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= proc_doulongvec_minmax,
 		.extra1		= (unsigned long *) &nlm_timeout_min,
 		.extra2		= (unsigned long *) &nlm_timeout_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nlm_udpport",
 		.data		= &nlm_udpport,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= (int *) &nlm_port_min,
 		.extra2		= (int *) &nlm_port_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nlm_tcpport",
 		.data		= &nlm_tcpport,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= (int *) &nlm_port_min,
 		.extra2		= (int *) &nlm_port_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nsm_use_hostnames",
 		.data		= &nsm_use_hostnames,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nsm_local_state",
 		.data		= &nsm_local_state,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table nlm_sysctl_dir[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nfs",
 		.mode		= 0555,
 		.child		= nlm_sysctls,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table nlm_sysctl_root[] = {
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.mode		= 0555,
 		.child		= nlm_sysctl_dir,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 #endif	/* CONFIG_SYSCTL */
diff --git a/fs/namespace.c b/fs/namespace.c
index bdc3cb4..7d70d63 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1921,6 +1921,16 @@
 	if (data_page)
 		((char *)data_page)[PAGE_SIZE - 1] = 0;
 
+	/* ... and get the mountpoint */
+	retval = kern_path(dir_name, LOOKUP_FOLLOW, &path);
+	if (retval)
+		return retval;
+
+	retval = security_sb_mount(dev_name, &path,
+				   type_page, flags, data_page);
+	if (retval)
+		goto dput_out;
+
 	/* Default to relatime unless overriden */
 	if (!(flags & MS_NOATIME))
 		mnt_flags |= MNT_RELATIME;
@@ -1945,16 +1955,6 @@
 		   MS_NOATIME | MS_NODIRATIME | MS_RELATIME| MS_KERNMOUNT |
 		   MS_STRICTATIME);
 
-	/* ... and get the mountpoint */
-	retval = kern_path(dir_name, LOOKUP_FOLLOW, &path);
-	if (retval)
-		return retval;
-
-	retval = security_sb_mount(dev_name, &path,
-				   type_page, flags, data_page);
-	if (retval)
-		goto dput_out;
-
 	if (flags & MS_REMOUNT)
 		retval = do_remount(&path, flags & ~MS_REMOUNT, mnt_flags,
 				    data_page);
diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c
index 70fad69..fa58800 100644
--- a/fs/nfs/fscache.c
+++ b/fs/nfs/fscache.c
@@ -359,17 +359,13 @@
 
 	BUG_ON(!cookie);
 
-	if (fscache_check_page_write(cookie, page)) {
-		if (!(gfp & __GFP_WAIT))
-			return 0;
-		fscache_wait_on_page_write(cookie, page);
-	}
-
 	if (PageFsCache(page)) {
 		dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n",
 			 cookie, page, nfsi);
 
-		fscache_uncache_page(cookie, page);
+		if (!fscache_maybe_release_page(cookie, page, gfp))
+			return 0;
+
 		nfs_add_fscache_stats(page->mapping->host,
 				      NFSIOS_FSCACHE_PAGES_UNCACHED, 1);
 	}
diff --git a/fs/nfs/sysctl.c b/fs/nfs/sysctl.c
index b62481da..70e1fbb 100644
--- a/fs/nfs/sysctl.c
+++ b/fs/nfs/sysctl.c
@@ -22,63 +22,55 @@
 static ctl_table nfs_cb_sysctls[] = {
 #ifdef CONFIG_NFS_V4
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "nfs_callback_tcpport",
 		.data = &nfs_callback_set_tcpport,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_minmax,
+		.proc_handler = proc_dointvec_minmax,
 		.extra1 = (int *)&nfs_set_port_min,
 		.extra2 = (int *)&nfs_set_port_max,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "idmap_cache_timeout",
 		.data = &nfs_idmap_cache_timeout,
 		.maxlen = sizeof(int),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_jiffies,
-		.strategy = &sysctl_jiffies,
+		.proc_handler = proc_dointvec_jiffies,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nfs_mountpoint_timeout",
 		.data		= &nfs_mountpoint_expiry_timeout,
 		.maxlen		= sizeof(nfs_mountpoint_expiry_timeout),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nfs_congestion_kb",
 		.data		= &nfs_congestion_kb,
 		.maxlen		= sizeof(nfs_congestion_kb),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table nfs_cb_sysctl_dir[] = {
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "nfs",
 		.mode = 0555,
 		.child = nfs_cb_sysctls,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table nfs_cb_sysctl_root[] = {
 	{
-		.ctl_name = CTL_FS,
 		.procname = "fs",
 		.mode = 0555,
 		.child = nfs_cb_sysctl_dir,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 int nfs_register_sysctl(void)
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 53eb26c..c84b5cc 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -178,7 +178,7 @@
 {
 	if (wbc->for_reclaim)
 		return FLUSH_HIGHPRI | FLUSH_STABLE;
-	if (wbc->for_kupdate)
+	if (wbc->for_kupdate || wbc->for_background)
 		return FLUSH_LOWPRI;
 	return 0;
 }
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index dcd2040..1d1d1a2 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -69,36 +69,30 @@
 
 ctl_table inotify_table[] = {
 	{
-		.ctl_name	= INOTIFY_MAX_USER_INSTANCES,
 		.procname	= "max_user_instances",
 		.data		= &inotify_max_user_instances,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 	},
 	{
-		.ctl_name	= INOTIFY_MAX_USER_WATCHES,
 		.procname	= "max_user_watches",
 		.data		= &inotify_max_user_watches,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 	},
 	{
-		.ctl_name	= INOTIFY_MAX_QUEUED_EVENTS,
 		.procname	= "max_queued_events",
 		.data		= &inotify_max_queued_events,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif /* CONFIG_SYSCTL */
 
diff --git a/fs/ntfs/sysctl.c b/fs/ntfs/sysctl.c
index 9ef85e6..79a8918 100644
--- a/fs/ntfs/sysctl.c
+++ b/fs/ntfs/sysctl.c
@@ -36,12 +36,11 @@
 /* Definition of the ntfs sysctl. */
 static ctl_table ntfs_sysctls[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,	/* Binary and text IDs. */
 		.procname	= "ntfs-debug",
 		.data		= &debug_msgs,		/* Data pointer and size. */
 		.maxlen		= sizeof(debug_msgs),
 		.mode		= 0644,			/* Mode, proc handler. */
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 	{}
 };
@@ -49,7 +48,6 @@
 /* Define the parent directory /proc/sys/fs. */
 static ctl_table sysctls_root[] = {
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.mode		= 0555,
 		.child		= ntfs_sysctls
diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index da794bc..a3f150e 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -294,10 +294,10 @@
 		if (sc->sc_sock) {
 			inet = inet_sk(sc->sc_sock->sk);
 			/* the stack's structs aren't sparse endian clean */
-			saddr = (__force __be32)inet->saddr;
-			daddr = (__force __be32)inet->daddr;
-			sport = (__force __be16)inet->sport;
-			dport = (__force __be16)inet->dport;
+			saddr = (__force __be32)inet->inet_saddr;
+			daddr = (__force __be32)inet->inet_daddr;
+			sport = (__force __be16)inet->inet_sport;
+			dport = (__force __be16)inet->inet_dport;
 		}
 
 		/* XXX sigh, inet-> doesn't have sparse annotation so any
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 3f2f1c4..f3df0ba 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -620,51 +620,46 @@
 
 static ctl_table ocfs2_nm_table[] = {
 	{
-		.ctl_name	= 1,
 		.procname	= "hb_ctl_path",
 		.data		= ocfs2_hb_ctl_path,
 		.maxlen		= OCFS2_MAX_HB_CTL_PATH,
 		.mode		= 0644,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string,
+		.proc_handler	= proc_dostring,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table ocfs2_mod_table[] = {
 	{
-		.ctl_name	= FS_OCFS2_NM,
 		.procname	= "nm",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= ocfs2_nm_table
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static ctl_table ocfs2_kern_table[] = {
 	{
-		.ctl_name	= FS_OCFS2,
 		.procname	= "ocfs2",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= ocfs2_mod_table
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static ctl_table ocfs2_root_table[] = {
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.data		= NULL,
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= ocfs2_kern_table
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header *ocfs2_table_header = NULL;
diff --git a/fs/open.c b/fs/open.c
index 4f01e06..b4b31d2 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -587,6 +587,9 @@
 	error = -EPERM;
 	if (!capable(CAP_SYS_CHROOT))
 		goto dput_and_out;
+	error = security_path_chroot(&path);
+	if (error)
+		goto dput_and_out;
 
 	set_fs_root(current->fs, &path);
 	error = 0;
@@ -617,11 +620,15 @@
 	if (err)
 		goto out_putf;
 	mutex_lock(&inode->i_mutex);
+	err = security_path_chmod(dentry, file->f_vfsmnt, mode);
+	if (err)
+		goto out_unlock;
 	if (mode == (mode_t) -1)
 		mode = inode->i_mode;
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
 	err = notify_change(dentry, &newattrs);
+out_unlock:
 	mutex_unlock(&inode->i_mutex);
 	mnt_drop_write(file->f_path.mnt);
 out_putf:
@@ -646,11 +653,15 @@
 	if (error)
 		goto dput_and_out;
 	mutex_lock(&inode->i_mutex);
+	error = security_path_chmod(path.dentry, path.mnt, mode);
+	if (error)
+		goto out_unlock;
 	if (mode == (mode_t) -1)
 		mode = inode->i_mode;
 	newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
 	newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
 	error = notify_change(path.dentry, &newattrs);
+out_unlock:
 	mutex_unlock(&inode->i_mutex);
 	mnt_drop_write(path.mnt);
 dput_and_out:
@@ -664,9 +675,9 @@
 	return sys_fchmodat(AT_FDCWD, filename, mode);
 }
 
-static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
+static int chown_common(struct path *path, uid_t user, gid_t group)
 {
-	struct inode *inode = dentry->d_inode;
+	struct inode *inode = path->dentry->d_inode;
 	int error;
 	struct iattr newattrs;
 
@@ -683,7 +694,9 @@
 		newattrs.ia_valid |=
 			ATTR_KILL_SUID | ATTR_KILL_SGID | ATTR_KILL_PRIV;
 	mutex_lock(&inode->i_mutex);
-	error = notify_change(dentry, &newattrs);
+	error = security_path_chown(path, user, group);
+	if (!error)
+		error = notify_change(path->dentry, &newattrs);
 	mutex_unlock(&inode->i_mutex);
 
 	return error;
@@ -700,7 +713,7 @@
 	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(path.dentry, user, group);
+	error = chown_common(&path, user, group);
 	mnt_drop_write(path.mnt);
 out_release:
 	path_put(&path);
@@ -725,7 +738,7 @@
 	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(path.dentry, user, group);
+	error = chown_common(&path, user, group);
 	mnt_drop_write(path.mnt);
 out_release:
 	path_put(&path);
@@ -744,7 +757,7 @@
 	error = mnt_want_write(path.mnt);
 	if (error)
 		goto out_release;
-	error = chown_common(path.dentry, user, group);
+	error = chown_common(&path, user, group);
 	mnt_drop_write(path.mnt);
 out_release:
 	path_put(&path);
@@ -767,7 +780,7 @@
 		goto out_fput;
 	dentry = file->f_path.dentry;
 	audit_inode(NULL, dentry);
-	error = chown_common(dentry, user, group);
+	error = chown_common(&file->f_path, user, group);
 	mnt_drop_write(file->f_path.mnt);
 out_fput:
 	fput(file);
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 7b685e1..64bc899 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -226,6 +226,13 @@
 	return sprintf(buf, "%llu\n", (unsigned long long)p->alignment_offset);
 }
 
+ssize_t part_discard_alignment_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct hd_struct *p = dev_to_part(dev);
+	return sprintf(buf, "%u\n", p->discard_alignment);
+}
+
 ssize_t part_stat_show(struct device *dev,
 		       struct device_attribute *attr, char *buf)
 {
@@ -288,6 +295,8 @@
 static DEVICE_ATTR(start, S_IRUGO, part_start_show, NULL);
 static DEVICE_ATTR(size, S_IRUGO, part_size_show, NULL);
 static DEVICE_ATTR(alignment_offset, S_IRUGO, part_alignment_offset_show, NULL);
+static DEVICE_ATTR(discard_alignment, S_IRUGO, part_discard_alignment_show,
+		   NULL);
 static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL);
 static DEVICE_ATTR(inflight, S_IRUGO, part_inflight_show, NULL);
 #ifdef CONFIG_FAIL_MAKE_REQUEST
@@ -300,6 +309,7 @@
 	&dev_attr_start.attr,
 	&dev_attr_size.attr,
 	&dev_attr_alignment_offset.attr,
+	&dev_attr_discard_alignment.attr,
 	&dev_attr_stat.attr,
 	&dev_attr_inflight.attr,
 #ifdef CONFIG_FAIL_MAKE_REQUEST
@@ -403,6 +413,8 @@
 
 	p->start_sect = start;
 	p->alignment_offset = queue_sector_alignment_offset(disk->queue, start);
+	p->discard_alignment = queue_sector_discard_alignment(disk->queue,
+							      start);
 	p->nr_sects = len;
 	p->partno = partno;
 	p->policy = get_disk_ro(disk);
diff --git a/fs/partitions/efi.c b/fs/partitions/efi.c
index 038a602..49cfd5f 100644
--- a/fs/partitions/efi.c
+++ b/fs/partitions/efi.c
@@ -1,7 +1,9 @@
 /************************************************************
  * EFI GUID Partition Table handling
- * Per Intel EFI Specification v1.02
- * http://developer.intel.com/technology/efi/efi.htm
+ *
+ * http://www.uefi.org/specs/
+ * http://www.intel.com/technology/efi/
+ *
  * efi.[ch] by Matt Domsch <Matt_Domsch@dell.com>
  *   Copyright 2000,2001,2002,2004 Dell Inc.
  *
@@ -92,6 +94,7 @@
  *
  ************************************************************/
 #include <linux/crc32.h>
+#include <linux/math64.h>
 #include "check.h"
 #include "efi.h"
 
@@ -141,7 +144,8 @@
 {
 	if (!bdev || !bdev->bd_inode)
 		return 0;
-	return (bdev->bd_inode->i_size >> 9) - 1ULL;
+	return div_u64(bdev->bd_inode->i_size,
+		       bdev_logical_block_size(bdev)) - 1ULL;
 }
 
 static inline int
@@ -188,6 +192,7 @@
 read_lba(struct block_device *bdev, u64 lba, u8 * buffer, size_t count)
 {
 	size_t totalreadcount = 0;
+	sector_t n = lba * (bdev_logical_block_size(bdev) / 512);
 
 	if (!bdev || !buffer || lba > last_lba(bdev))
                 return 0;
@@ -195,7 +200,7 @@
 	while (count) {
 		int copied = 512;
 		Sector sect;
-		unsigned char *data = read_dev_sector(bdev, lba++, &sect);
+		unsigned char *data = read_dev_sector(bdev, n++, &sect);
 		if (!data)
 			break;
 		if (copied > count)
@@ -257,15 +262,16 @@
 alloc_read_gpt_header(struct block_device *bdev, u64 lba)
 {
 	gpt_header *gpt;
+	unsigned ssz = bdev_logical_block_size(bdev);
+
 	if (!bdev)
 		return NULL;
 
-	gpt = kzalloc(sizeof (gpt_header), GFP_KERNEL);
+	gpt = kzalloc(ssz, GFP_KERNEL);
 	if (!gpt)
 		return NULL;
 
-	if (read_lba(bdev, lba, (u8 *) gpt,
-		     sizeof (gpt_header)) < sizeof (gpt_header)) {
+	if (read_lba(bdev, lba, (u8 *) gpt, ssz) < ssz) {
 		kfree(gpt);
                 gpt=NULL;
 		return NULL;
@@ -601,6 +607,7 @@
 	gpt_header *gpt = NULL;
 	gpt_entry *ptes = NULL;
 	u32 i;
+	unsigned ssz = bdev_logical_block_size(bdev) / 512;
 
 	if (!find_valid_gpt(bdev, &gpt, &ptes) || !gpt || !ptes) {
 		kfree(gpt);
@@ -611,13 +618,14 @@
 	pr_debug("GUID Partition Table is valid!  Yea!\n");
 
 	for (i = 0; i < le32_to_cpu(gpt->num_partition_entries) && i < state->limit-1; i++) {
+		u64 start = le64_to_cpu(ptes[i].starting_lba);
+		u64 size = le64_to_cpu(ptes[i].ending_lba) -
+			   le64_to_cpu(ptes[i].starting_lba) + 1ULL;
+
 		if (!is_pte_valid(&ptes[i], last_lba(bdev)))
 			continue;
 
-		put_partition(state, i+1, le64_to_cpu(ptes[i].starting_lba),
-				 (le64_to_cpu(ptes[i].ending_lba) -
-                                  le64_to_cpu(ptes[i].starting_lba) +
-				  1ULL));
+		put_partition(state, i+1, start * ssz, size * ssz);
 
 		/* If this is a RAID volume, tell md */
 		if (!efi_guidcmp(ptes[i].partition_type_guid,
diff --git a/fs/partitions/efi.h b/fs/partitions/efi.h
index 2cc89d0..6998b58 100644
--- a/fs/partitions/efi.h
+++ b/fs/partitions/efi.h
@@ -37,7 +37,6 @@
 #define EFI_PMBR_OSTYPE_EFI 0xEF
 #define EFI_PMBR_OSTYPE_EFI_GPT 0xEE
 
-#define GPT_BLOCK_SIZE 512
 #define GPT_HEADER_SIGNATURE 0x5452415020494645ULL
 #define GPT_HEADER_REVISION_V1 0x00010000
 #define GPT_PRIMARY_PARTITION_TABLE_LBA 1
@@ -79,7 +78,12 @@
 	__le32 num_partition_entries;
 	__le32 sizeof_partition_entry;
 	__le32 partition_entry_array_crc32;
-	u8 reserved2[GPT_BLOCK_SIZE - 92];
+
+	/* The rest of the logical block is reserved by UEFI and must be zero.
+	 * EFI standard handles this by:
+	 *
+	 * uint8_t		reserved2[ BlockSize - 92 ];
+	 */
 } __attribute__ ((packed)) gpt_header;
 
 typedef struct _gpt_entry_attributes {
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 822c2d5..4badde1 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -410,6 +410,16 @@
 }
 #endif		/* CONFIG_MMU */
 
+static void task_cpus_allowed(struct seq_file *m, struct task_struct *task)
+{
+	seq_printf(m, "Cpus_allowed:\t");
+	seq_cpumask(m, &task->cpus_allowed);
+	seq_printf(m, "\n");
+	seq_printf(m, "Cpus_allowed_list:\t");
+	seq_cpumask_list(m, &task->cpus_allowed);
+	seq_printf(m, "\n");
+}
+
 int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task)
 {
@@ -424,6 +434,7 @@
 	}
 	task_sig(m, task);
 	task_cap(m, task);
+	task_cpus_allowed(m, task);
 	cpuset_task_status_allowed(m, task);
 #if defined(CONFIG_S390)
 	task_show_regs(m, task);
@@ -495,20 +506,17 @@
 
 		/* add up live thread stats at the group level */
 		if (whole) {
-			struct task_cputime cputime;
 			struct task_struct *t = task;
 			do {
 				min_flt += t->min_flt;
 				maj_flt += t->maj_flt;
-				gtime = cputime_add(gtime, task_gtime(t));
+				gtime = cputime_add(gtime, t->gtime);
 				t = next_thread(t);
 			} while (t != task);
 
 			min_flt += sig->min_flt;
 			maj_flt += sig->maj_flt;
-			thread_group_cputime(task, &cputime);
-			utime = cputime.utime;
-			stime = cputime.stime;
+			thread_group_times(task, &utime, &stime);
 			gtime = cputime_add(gtime, sig->gtime);
 		}
 
@@ -524,9 +532,8 @@
 	if (!whole) {
 		min_flt = task->min_flt;
 		maj_flt = task->maj_flt;
-		utime = task_utime(task);
-		stime = task_stime(task);
-		gtime = task_gtime(task);
+		task_times(task, &utime, &stime);
+		gtime = task->gtime;
 	}
 
 	/* scale priority and nice values from timeslices to -20..20 */
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index f667e8a..6ff9981 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -48,7 +48,7 @@
 static struct ctl_table *find_in_table(struct ctl_table *p, struct qstr *name)
 {
 	int len;
-	for ( ; p->ctl_name || p->procname; p++) {
+	for ( ; p->procname; p++) {
 
 		if (!p->procname)
 			continue;
@@ -218,7 +218,7 @@
 		void *dirent, filldir_t filldir)
 {
 
-	for (; table->ctl_name || table->procname; table++, (*pos)++) {
+	for (; table->procname; table++, (*pos)++) {
 		int res;
 
 		/* Can't do anything without a proc name */
diff --git a/fs/proc/stat.c b/fs/proc/stat.c
index 7cc726c..b9b7aad 100644
--- a/fs/proc/stat.c
+++ b/fs/proc/stat.c
@@ -27,7 +27,7 @@
 	int i, j;
 	unsigned long jif;
 	cputime64_t user, nice, system, idle, iowait, irq, softirq, steal;
-	cputime64_t guest;
+	cputime64_t guest, guest_nice;
 	u64 sum = 0;
 	u64 sum_softirq = 0;
 	unsigned int per_softirq_sums[NR_SOFTIRQS] = {0};
@@ -36,7 +36,7 @@
 
 	user = nice = system = idle = iowait =
 		irq = softirq = steal = cputime64_zero;
-	guest = cputime64_zero;
+	guest = guest_nice = cputime64_zero;
 	getboottime(&boottime);
 	jif = boottime.tv_sec;
 
@@ -51,6 +51,8 @@
 		softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
 		steal = cputime64_add(steal, kstat_cpu(i).cpustat.steal);
 		guest = cputime64_add(guest, kstat_cpu(i).cpustat.guest);
+		guest_nice = cputime64_add(guest_nice,
+			kstat_cpu(i).cpustat.guest_nice);
 		for_each_irq_nr(j) {
 			sum += kstat_irqs_cpu(j, i);
 		}
@@ -65,7 +67,8 @@
 	}
 	sum += arch_irq_stat();
 
-	seq_printf(p, "cpu  %llu %llu %llu %llu %llu %llu %llu %llu %llu\n",
+	seq_printf(p, "cpu  %llu %llu %llu %llu %llu %llu %llu %llu %llu "
+		"%llu\n",
 		(unsigned long long)cputime64_to_clock_t(user),
 		(unsigned long long)cputime64_to_clock_t(nice),
 		(unsigned long long)cputime64_to_clock_t(system),
@@ -74,7 +77,8 @@
 		(unsigned long long)cputime64_to_clock_t(irq),
 		(unsigned long long)cputime64_to_clock_t(softirq),
 		(unsigned long long)cputime64_to_clock_t(steal),
-		(unsigned long long)cputime64_to_clock_t(guest));
+		(unsigned long long)cputime64_to_clock_t(guest),
+		(unsigned long long)cputime64_to_clock_t(guest_nice));
 	for_each_online_cpu(i) {
 
 		/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
@@ -88,8 +92,10 @@
 		softirq = kstat_cpu(i).cpustat.softirq;
 		steal = kstat_cpu(i).cpustat.steal;
 		guest = kstat_cpu(i).cpustat.guest;
+		guest_nice = kstat_cpu(i).cpustat.guest_nice;
 		seq_printf(p,
-			"cpu%d %llu %llu %llu %llu %llu %llu %llu %llu %llu\n",
+			"cpu%d %llu %llu %llu %llu %llu %llu %llu %llu %llu "
+			"%llu\n",
 			i,
 			(unsigned long long)cputime64_to_clock_t(user),
 			(unsigned long long)cputime64_to_clock_t(nice),
@@ -99,7 +105,8 @@
 			(unsigned long long)cputime64_to_clock_t(irq),
 			(unsigned long long)cputime64_to_clock_t(softirq),
 			(unsigned long long)cputime64_to_clock_t(steal),
-			(unsigned long long)cputime64_to_clock_t(guest));
+			(unsigned long long)cputime64_to_clock_t(guest),
+			(unsigned long long)cputime64_to_clock_t(guest_nice));
 	}
 	seq_printf(p, "intr %llu", (unsigned long long)sum);
 
diff --git a/fs/quota/Kconfig b/fs/quota/Kconfig
index 8047e01..353e78a 100644
--- a/fs/quota/Kconfig
+++ b/fs/quota/Kconfig
@@ -17,7 +17,7 @@
 
 config QUOTA_NETLINK_INTERFACE
 	bool "Report quota messages through netlink interface"
-	depends on QUOTA && NET
+	depends on QUOTACTL && NET
 	help
 	  If you say Y here, quota warnings (about exceeding softlimit, reaching
 	  hardlimit, etc.) will be reported through netlink interface. If unsure,
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 39b49c4..eb5a755 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -77,10 +77,6 @@
 #include <linux/capability.h>
 #include <linux/quotaops.h>
 #include <linux/writeback.h> /* for inode_lock, oddly enough.. */
-#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
-#include <net/netlink.h>
-#include <net/genetlink.h>
-#endif
 
 #include <asm/uaccess.h>
 
@@ -1071,73 +1067,6 @@
 }
 #endif
 
-#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
-
-/* Netlink family structure for quota */
-static struct genl_family quota_genl_family = {
-	.id = GENL_ID_GENERATE,
-	.hdrsize = 0,
-	.name = "VFS_DQUOT",
-	.version = 1,
-	.maxattr = QUOTA_NL_A_MAX,
-};
-
-/* Send warning to userspace about user which exceeded quota */
-static void send_warning(const struct dquot *dquot, const char warntype)
-{
-	static atomic_t seq;
-	struct sk_buff *skb;
-	void *msg_head;
-	int ret;
-	int msg_size = 4 * nla_total_size(sizeof(u32)) +
-		       2 * nla_total_size(sizeof(u64));
-
-	/* We have to allocate using GFP_NOFS as we are called from a
-	 * filesystem performing write and thus further recursion into
-	 * the fs to free some data could cause deadlocks. */
-	skb = genlmsg_new(msg_size, GFP_NOFS);
-	if (!skb) {
-		printk(KERN_ERR
-		  "VFS: Not enough memory to send quota warning.\n");
-		return;
-	}
-	msg_head = genlmsg_put(skb, 0, atomic_add_return(1, &seq),
-			&quota_genl_family, 0, QUOTA_NL_C_WARNING);
-	if (!msg_head) {
-		printk(KERN_ERR
-		  "VFS: Cannot store netlink header in quota warning.\n");
-		goto err_out;
-	}
-	ret = nla_put_u32(skb, QUOTA_NL_A_QTYPE, dquot->dq_type);
-	if (ret)
-		goto attr_err_out;
-	ret = nla_put_u64(skb, QUOTA_NL_A_EXCESS_ID, dquot->dq_id);
-	if (ret)
-		goto attr_err_out;
-	ret = nla_put_u32(skb, QUOTA_NL_A_WARNING, warntype);
-	if (ret)
-		goto attr_err_out;
-	ret = nla_put_u32(skb, QUOTA_NL_A_DEV_MAJOR,
-		MAJOR(dquot->dq_sb->s_dev));
-	if (ret)
-		goto attr_err_out;
-	ret = nla_put_u32(skb, QUOTA_NL_A_DEV_MINOR,
-		MINOR(dquot->dq_sb->s_dev));
-	if (ret)
-		goto attr_err_out;
-	ret = nla_put_u64(skb, QUOTA_NL_A_CAUSED_ID, current_uid());
-	if (ret)
-		goto attr_err_out;
-	genlmsg_end(skb, msg_head);
-
-	genlmsg_multicast(skb, 0, quota_genl_family.id, GFP_NOFS);
-	return;
-attr_err_out:
-	printk(KERN_ERR "VFS: Not enough space to compose quota message!\n");
-err_out:
-	kfree_skb(skb);
-}
-#endif
 /*
  * Write warnings to the console and send warning messages over netlink.
  *
@@ -1145,18 +1074,20 @@
  */
 static void flush_warnings(struct dquot *const *dquots, char *warntype)
 {
+	struct dquot *dq;
 	int i;
 
-	for (i = 0; i < MAXQUOTAS; i++)
-		if (dquots[i] && warntype[i] != QUOTA_NL_NOWARN &&
-		    !warning_issued(dquots[i], warntype[i])) {
+	for (i = 0; i < MAXQUOTAS; i++) {
+		dq = dquots[i];
+		if (dq && warntype[i] != QUOTA_NL_NOWARN &&
+		    !warning_issued(dq, warntype[i])) {
 #ifdef CONFIG_PRINT_QUOTA_WARNING
-			print_warning(dquots[i], warntype[i]);
+			print_warning(dq, warntype[i]);
 #endif
-#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
-			send_warning(dquots[i], warntype[i]);
-#endif
+			quota_send_warning(dq->dq_type, dq->dq_id,
+					   dq->dq_sb->s_dev, warntype[i]);
 		}
+	}
 }
 
 static int ignore_hardlimit(struct dquot *dquot)
@@ -2473,100 +2404,89 @@
 
 static ctl_table fs_dqstats_table[] = {
 	{
-		.ctl_name	= FS_DQ_LOOKUPS,
 		.procname	= "lookups",
 		.data		= &dqstats.lookups,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_DROPS,
 		.procname	= "drops",
 		.data		= &dqstats.drops,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_READS,
 		.procname	= "reads",
 		.data		= &dqstats.reads,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_WRITES,
 		.procname	= "writes",
 		.data		= &dqstats.writes,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_CACHE_HITS,
 		.procname	= "cache_hits",
 		.data		= &dqstats.cache_hits,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_ALLOCATED,
 		.procname	= "allocated_dquots",
 		.data		= &dqstats.allocated_dquots,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_FREE,
 		.procname	= "free_dquots",
 		.data		= &dqstats.free_dquots,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_DQ_SYNCS,
 		.procname	= "syncs",
 		.data		= &dqstats.syncs,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_PRINT_QUOTA_WARNING
 	{
-		.ctl_name	= FS_DQ_WARNINGS,
 		.procname	= "warnings",
 		.data		= &flag_print_warnings,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
-	{ .ctl_name = 0 },
+	{ },
 };
 
 static ctl_table fs_table[] = {
 	{
-		.ctl_name	= FS_DQSTATS,
 		.procname	= "quota",
 		.mode		= 0555,
 		.child		= fs_dqstats_table,
 	},
-	{ .ctl_name = 0 },
+	{ },
 };
 
 static ctl_table sys_table[] = {
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.mode		= 0555,
 		.child		= fs_table,
 	},
-	{ .ctl_name = 0 },
+	{ },
 };
 
 static int __init dquot_init(void)
@@ -2607,12 +2527,6 @@
 
 	register_shrinker(&dqcache_shrinker);
 
-#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
-	if (genl_register_family(&quota_genl_family) != 0)
-		printk(KERN_ERR
-		       "VFS: Failed to create quota netlink interface.\n");
-#endif
-
 	return 0;
 }
 module_init(dquot_init);
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index 95c5b42..ee91e27 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -18,6 +18,8 @@
 #include <linux/capability.h>
 #include <linux/quotaops.h>
 #include <linux/types.h>
+#include <net/netlink.h>
+#include <net/genetlink.h>
 
 /* Check validity of generic quotactl commands */
 static int generic_quotactl_valid(struct super_block *sb, int type, int cmd,
@@ -525,3 +527,94 @@
 	return ret;
 }
 #endif
+
+
+#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
+
+/* Netlink family structure for quota */
+static struct genl_family quota_genl_family = {
+	.id = GENL_ID_GENERATE,
+	.hdrsize = 0,
+	.name = "VFS_DQUOT",
+	.version = 1,
+	.maxattr = QUOTA_NL_A_MAX,
+};
+
+/**
+ * quota_send_warning - Send warning to userspace about exceeded quota
+ * @type: The quota type: USRQQUOTA, GRPQUOTA,...
+ * @id: The user or group id of the quota that was exceeded
+ * @dev: The device on which the fs is mounted (sb->s_dev)
+ * @warntype: The type of the warning: QUOTA_NL_...
+ *
+ * This can be used by filesystems (including those which don't use
+ * dquot) to send a message to userspace relating to quota limits.
+ *
+ */
+
+void quota_send_warning(short type, unsigned int id, dev_t dev,
+			const char warntype)
+{
+	static atomic_t seq;
+	struct sk_buff *skb;
+	void *msg_head;
+	int ret;
+	int msg_size = 4 * nla_total_size(sizeof(u32)) +
+		       2 * nla_total_size(sizeof(u64));
+
+	/* We have to allocate using GFP_NOFS as we are called from a
+	 * filesystem performing write and thus further recursion into
+	 * the fs to free some data could cause deadlocks. */
+	skb = genlmsg_new(msg_size, GFP_NOFS);
+	if (!skb) {
+		printk(KERN_ERR
+		  "VFS: Not enough memory to send quota warning.\n");
+		return;
+	}
+	msg_head = genlmsg_put(skb, 0, atomic_add_return(1, &seq),
+			&quota_genl_family, 0, QUOTA_NL_C_WARNING);
+	if (!msg_head) {
+		printk(KERN_ERR
+		  "VFS: Cannot store netlink header in quota warning.\n");
+		goto err_out;
+	}
+	ret = nla_put_u32(skb, QUOTA_NL_A_QTYPE, type);
+	if (ret)
+		goto attr_err_out;
+	ret = nla_put_u64(skb, QUOTA_NL_A_EXCESS_ID, id);
+	if (ret)
+		goto attr_err_out;
+	ret = nla_put_u32(skb, QUOTA_NL_A_WARNING, warntype);
+	if (ret)
+		goto attr_err_out;
+	ret = nla_put_u32(skb, QUOTA_NL_A_DEV_MAJOR, MAJOR(dev));
+	if (ret)
+		goto attr_err_out;
+	ret = nla_put_u32(skb, QUOTA_NL_A_DEV_MINOR, MINOR(dev));
+	if (ret)
+		goto attr_err_out;
+	ret = nla_put_u64(skb, QUOTA_NL_A_CAUSED_ID, current_uid());
+	if (ret)
+		goto attr_err_out;
+	genlmsg_end(skb, msg_head);
+
+	genlmsg_multicast(skb, 0, quota_genl_family.id, GFP_NOFS);
+	return;
+attr_err_out:
+	printk(KERN_ERR "VFS: Not enough space to compose quota message!\n");
+err_out:
+	kfree_skb(skb);
+}
+EXPORT_SYMBOL(quota_send_warning);
+
+static int __init quota_init(void)
+{
+	if (genl_register_family(&quota_genl_family) != 0)
+		printk(KERN_ERR
+		       "VFS: Failed to create quota netlink interface.\n");
+	return 0;
+};
+
+module_init(quota_init);
+#endif
+
diff --git a/fs/read_write.c b/fs/read_write.c
index 3ac2898..b7f4a1f 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -826,8 +826,6 @@
 	if (!(out_file->f_mode & FMODE_WRITE))
 		goto fput_out;
 	retval = -EINVAL;
-	if (!out_file->f_op || !out_file->f_op->sendpage)
-		goto fput_out;
 	in_inode = in_file->f_path.dentry->d_inode;
 	out_inode = out_file->f_path.dentry->d_inode;
 	retval = rw_verify_area(WRITE, out_file, &out_file->f_pos, count);
diff --git a/fs/splice.c b/fs/splice.c
index 7394e9e..3920866 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -648,9 +648,11 @@
 	ret = buf->ops->confirm(pipe, buf);
 	if (!ret) {
 		more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
-
-		ret = file->f_op->sendpage(file, buf->page, buf->offset,
-					   sd->len, &pos, more);
+		if (file->f_op && file->f_op->sendpage)
+			ret = file->f_op->sendpage(file, buf->page, buf->offset,
+						   sd->len, &pos, more);
+		else
+			ret = -EINVAL;
 	}
 
 	return ret;
@@ -1068,8 +1070,9 @@
 	if (unlikely(ret < 0))
 		return ret;
 
-	splice_write = out->f_op->splice_write;
-	if (!splice_write)
+	if (out->f_op && out->f_op->splice_write)
+		splice_write = out->f_op->splice_write;
+	else
 		splice_write = default_file_splice_write;
 
 	return splice_write(pipe, out, ppos, len, flags);
@@ -1093,8 +1096,9 @@
 	if (unlikely(ret < 0))
 		return ret;
 
-	splice_read = in->f_op->splice_read;
-	if (!splice_read)
+	if (in->f_op && in->f_op->splice_read)
+		splice_read = in->f_op->splice_read;
+	else
 		splice_read = default_file_splice_read;
 
 	return splice_read(in, ppos, pipe, len, flags);
@@ -1316,7 +1320,8 @@
 		if (off_in)
 			return -ESPIPE;
 		if (off_out) {
-			if (out->f_op->llseek == no_llseek)
+			if (!out->f_op || !out->f_op->llseek ||
+			    out->f_op->llseek == no_llseek)
 				return -EINVAL;
 			if (copy_from_user(&offset, off_out, sizeof(loff_t)))
 				return -EFAULT;
@@ -1336,7 +1341,8 @@
 		if (off_out)
 			return -ESPIPE;
 		if (off_in) {
-			if (in->f_op->llseek == no_llseek)
+			if (!in->f_op || !in->f_op->llseek ||
+			    in->f_op->llseek == no_llseek)
 				return -EINVAL;
 			if (copy_from_user(&offset, off_in, sizeof(loff_t)))
 				return -EFAULT;
diff --git a/fs/xattr_acl.c b/fs/xattr_acl.c
index c6ad7c7..05ac0fe 100644
--- a/fs/xattr_acl.c
+++ b/fs/xattr_acl.c
@@ -36,7 +36,7 @@
 	if (count == 0)
 		return NULL;
 	
-	acl = posix_acl_alloc(count, GFP_KERNEL);
+	acl = posix_acl_alloc(count, GFP_NOFS);
 	if (!acl)
 		return ERR_PTR(-ENOMEM);
 	acl_e = acl->a_entries;
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c2e30ee..70f9898 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -904,16 +904,9 @@
 
 	if (startio) {
 		if (count) {
-			struct backing_dev_info *bdi;
-
-			bdi = inode->i_mapping->backing_dev_info;
 			wbc->nr_to_write--;
-			if (bdi_write_congested(bdi)) {
-				wbc->encountered_congestion = 1;
+			if (wbc->nr_to_write <= 0)
 				done = 1;
-			} else if (wbc->nr_to_write <= 0) {
-				done = 1;
-			}
 		}
 		xfs_start_page_writeback(page, !page_dirty, count);
 	}
diff --git a/fs/xfs/linux-2.6/xfs_sysctl.c b/fs/xfs/linux-2.6/xfs_sysctl.c
index c5bc67c..7bb5092 100644
--- a/fs/xfs/linux-2.6/xfs_sysctl.c
+++ b/fs/xfs/linux-2.6/xfs_sysctl.c
@@ -55,170 +55,140 @@
 
 static ctl_table xfs_table[] = {
 	{
-		.ctl_name	= XFS_SGID_INHERIT,
 		.procname	= "irix_sgid_inherit",
 		.data		= &xfs_params.sgid_inherit.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.sgid_inherit.min,
 		.extra2		= &xfs_params.sgid_inherit.max
 	},
 	{
-		.ctl_name	= XFS_SYMLINK_MODE,
 		.procname	= "irix_symlink_mode",
 		.data		= &xfs_params.symlink_mode.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.symlink_mode.min,
 		.extra2		= &xfs_params.symlink_mode.max
 	},
 	{
-		.ctl_name	= XFS_PANIC_MASK,
 		.procname	= "panic_mask",
 		.data		= &xfs_params.panic_mask.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.panic_mask.min,
 		.extra2		= &xfs_params.panic_mask.max
 	},
 
 	{
-		.ctl_name	= XFS_ERRLEVEL,
 		.procname	= "error_level",
 		.data		= &xfs_params.error_level.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.error_level.min,
 		.extra2		= &xfs_params.error_level.max
 	},
 	{
-		.ctl_name	= XFS_SYNCD_TIMER,
 		.procname	= "xfssyncd_centisecs",
 		.data		= &xfs_params.syncd_timer.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.syncd_timer.min,
 		.extra2		= &xfs_params.syncd_timer.max
 	},
 	{
-		.ctl_name	= XFS_INHERIT_SYNC,
 		.procname	= "inherit_sync",
 		.data		= &xfs_params.inherit_sync.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.inherit_sync.min,
 		.extra2		= &xfs_params.inherit_sync.max
 	},
 	{
-		.ctl_name	= XFS_INHERIT_NODUMP,
 		.procname	= "inherit_nodump",
 		.data		= &xfs_params.inherit_nodump.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.inherit_nodump.min,
 		.extra2		= &xfs_params.inherit_nodump.max
 	},
 	{
-		.ctl_name	= XFS_INHERIT_NOATIME,
 		.procname	= "inherit_noatime",
 		.data		= &xfs_params.inherit_noatim.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.inherit_noatim.min,
 		.extra2		= &xfs_params.inherit_noatim.max
 	},
 	{
-		.ctl_name	= XFS_BUF_TIMER,
 		.procname	= "xfsbufd_centisecs",
 		.data		= &xfs_params.xfs_buf_timer.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.xfs_buf_timer.min,
 		.extra2		= &xfs_params.xfs_buf_timer.max
 	},
 	{
-		.ctl_name	= XFS_BUF_AGE,
 		.procname	= "age_buffer_centisecs",
 		.data		= &xfs_params.xfs_buf_age.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.xfs_buf_age.min,
 		.extra2		= &xfs_params.xfs_buf_age.max
 	},
 	{
-		.ctl_name	= XFS_INHERIT_NOSYM,
 		.procname	= "inherit_nosymlinks",
 		.data		= &xfs_params.inherit_nosym.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.inherit_nosym.min,
 		.extra2		= &xfs_params.inherit_nosym.max
 	},
 	{
-		.ctl_name	= XFS_ROTORSTEP,
 		.procname	= "rotorstep",
 		.data		= &xfs_params.rotorstep.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.rotorstep.min,
 		.extra2		= &xfs_params.rotorstep.max
 	},
 	{
-		.ctl_name	= XFS_INHERIT_NODFRG,
 		.procname	= "inherit_nodefrag",
 		.data		= &xfs_params.inherit_nodfrg.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.inherit_nodfrg.min,
 		.extra2		= &xfs_params.inherit_nodfrg.max
 	},
 	{
-		.ctl_name	= XFS_FILESTREAM_TIMER,
 		.procname	= "filestream_centisecs",
 		.data		= &xfs_params.fstrm_timer.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xfs_params.fstrm_timer.min,
 		.extra2		= &xfs_params.fstrm_timer.max,
 	},
 	/* please keep this the last entry */
 #ifdef CONFIG_PROC_FS
 	{
-		.ctl_name	= XFS_STATS_CLEAR,
 		.procname	= "stats_clear",
 		.data		= &xfs_params.stats_clear.val,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &xfs_stats_clear_proc_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= xfs_stats_clear_proc_handler,
 		.extra1		= &xfs_params.stats_clear.min,
 		.extra2		= &xfs_params.stats_clear.max
 	},
@@ -229,7 +199,6 @@
 
 static ctl_table xfs_dir_table[] = {
 	{
-		.ctl_name	= FS_XFS,
 		.procname	= "xfs",
 		.mode		= 0555,
 		.child		= xfs_table
@@ -239,7 +208,6 @@
 
 static ctl_table xfs_root_table[] = {
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.mode		= 0555,
 		.child		= xfs_dir_table
diff --git a/include/asm-generic/cacheflush.h b/include/asm-generic/cacheflush.h
index ba4ec39..57b5c3c 100644
--- a/include/asm-generic/cacheflush.h
+++ b/include/asm-generic/cacheflush.h
@@ -13,6 +13,7 @@
 #define flush_cache_dup_mm(mm)			do { } while (0)
 #define flush_cache_range(vma, start, end)	do { } while (0)
 #define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
 #define flush_dcache_page(page)			do { } while (0)
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/include/asm-generic/socket.h b/include/asm-generic/socket.h
index 538991c..9a6115e 100644
--- a/include/asm-generic/socket.h
+++ b/include/asm-generic/socket.h
@@ -63,4 +63,5 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
 #endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 1feed71..5a53857 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -330,6 +330,7 @@
 unifdef-y += sched.h
 unifdef-y += screen_info.h
 unifdef-y += sdla.h
+unifdef-y += securebits.h
 unifdef-y += selinux_netlink.h
 unifdef-y += sem.h
 unifdef-y += serial_core.h
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 4fb3573..38a6948 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -75,6 +75,7 @@
 	ATA_ID_EIDE_DMA_TIME	= 66,
 	ATA_ID_EIDE_PIO		= 67,
 	ATA_ID_EIDE_PIO_IORDY	= 68,
+	ATA_ID_ADDITIONAL_SUPP	= 69,
 	ATA_ID_QUEUE_DEPTH	= 75,
 	ATA_ID_MAJOR_VER	= 80,
 	ATA_ID_COMMAND_SET_1	= 82,
@@ -87,6 +88,7 @@
 	ATA_ID_HW_CONFIG	= 93,
 	ATA_ID_SPG		= 98,
 	ATA_ID_LBA_CAPACITY_2	= 100,
+	ATA_ID_SECTOR_SIZE	= 106,
 	ATA_ID_LAST_LUN		= 126,
 	ATA_ID_DLF		= 128,
 	ATA_ID_CSFO		= 129,
@@ -638,6 +640,18 @@
 	return (id[ATA_ID_CFS_ENABLE_2] & 0x2400) == 0x2400;
 }
 
+static inline int ata_id_has_large_logical_sectors(const u16 *id)
+{
+	if ((id[ATA_ID_SECTOR_SIZE] & 0xc000) != 0x4000)
+		return 0;
+	return id[ATA_ID_SECTOR_SIZE] & (1 << 13);
+}
+
+static inline u8 ata_id_logical_per_physical_sectors(const u16 *id)
+{
+	return id[ATA_ID_SECTOR_SIZE] & 0xf;
+}
+
 static inline int ata_id_has_lba48(const u16 *id)
 {
 	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
@@ -803,6 +817,16 @@
 	return 0;
 }
 
+static inline int ata_id_has_zero_after_trim(const u16 *id)
+{
+	/* DSM supported, deterministic read, and read zero after trim set */
+	if (ata_id_has_trim(id) &&
+	    (id[ATA_ID_ADDITIONAL_SUPP] & 0x4020) == 0x4020)
+		return 1;
+
+	return 0;
+}
+
 static inline int ata_id_current_chs_valid(const u16 *id)
 {
 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -958,17 +982,17 @@
 }
 
 /*
- * Write up to 'max' LBA Range Entries to the buffer that will cover the
- * extent from sector to sector + count.  This is used for TRIM and for
- * ADD LBA(S) TO NV CACHE PINNED SET.
+ * Write LBA Range Entries to the buffer that will cover the extent from
+ * sector to sector + count.  This is used for TRIM and for ADD LBA(S)
+ * TO NV CACHE PINNED SET.
  */
-static inline unsigned ata_set_lba_range_entries(void *_buffer, unsigned max,
-						u64 sector, unsigned long count)
+static inline unsigned ata_set_lba_range_entries(void *_buffer,
+		unsigned buf_size, u64 sector, unsigned long count)
 {
 	__le64 *buffer = _buffer;
-	unsigned i = 0;
+	unsigned i = 0, used_bytes;
 
-	while (i < max) {
+	while (i < buf_size / 8 ) { /* 6-byte LBA + 2-byte range per entry */
 		u64 entry = sector |
 			((u64)(count > 0xffff ? 0xffff : count) << 48);
 		buffer[i++] = __cpu_to_le64(entry);
@@ -978,9 +1002,9 @@
 		sector += 0xffff;
 	}
 
-	max = ALIGN(i * 8, 512);
-	memset(buffer + i, 0, max - i * 8);
-	return max;
+	used_bytes = ALIGN(i * 8, 512);
+	memset(buffer + i, 0, used_bytes - i * 8);
+	return used_bytes;
 }
 
 static inline int is_multi_taskfile(struct ata_taskfile *tf)
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index b449e73..fcbc26a 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -331,4 +331,17 @@
 	return 0;
 }
 
+static inline void blk_run_backing_dev(struct backing_dev_info *bdi,
+				       struct page *page)
+{
+	if (bdi && bdi->unplug_io_fn)
+		bdi->unplug_io_fn(bdi, page);
+}
+
+static inline void blk_run_address_space(struct address_space *mapping)
+{
+	if (mapping)
+		blk_run_backing_dev(mapping->backing_dev_info, NULL);
+}
+
 #endif		/* _LINUX_BACKING_DEV_H */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 5be93f1..7fc5606 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -391,6 +391,18 @@
 				 gfp_t, int);
 extern void bio_set_pages_dirty(struct bio *bio);
 extern void bio_check_pages_dirty(struct bio *bio);
+
+#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+# error	"You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
+#endif
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+extern void bio_flush_dcache_pages(struct bio *bi);
+#else
+static inline void bio_flush_dcache_pages(struct bio *bi)
+{
+}
+#endif
+
 extern struct bio *bio_copy_user(struct request_queue *, struct rq_map_data *,
 				 unsigned long, unsigned int, int, gfp_t);
 extern struct bio *bio_copy_user_iov(struct request_queue *,
@@ -450,11 +462,8 @@
 /*
  * remember never ever reenable interrupts between a bvec_kmap_irq and
  * bvec_kunmap_irq!
- *
- * This function MUST be inlined - it plays with the CPU interrupt flags.
  */
-static __always_inline char *bvec_kmap_irq(struct bio_vec *bvec,
-		unsigned long *flags)
+static inline char *bvec_kmap_irq(struct bio_vec *bvec, unsigned long *flags)
 {
 	unsigned long addr;
 
@@ -470,8 +479,7 @@
 	return (char *) addr + bvec->bv_offset;
 }
 
-static __always_inline void bvec_kunmap_irq(char *buffer,
-		unsigned long *flags)
+static inline void bvec_kunmap_irq(char *buffer, unsigned long *flags)
 {
 	unsigned long ptr = (unsigned long) buffer & PAGE_MASK;
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 221cecd..784a919 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -312,13 +312,17 @@
 	unsigned int		io_min;
 	unsigned int		io_opt;
 	unsigned int		max_discard_sectors;
+	unsigned int		discard_granularity;
+	unsigned int		discard_alignment;
 
 	unsigned short		logical_block_size;
 	unsigned short		max_hw_segments;
 	unsigned short		max_phys_segments;
 
 	unsigned char		misaligned;
+	unsigned char		discard_misaligned;
 	unsigned char		no_cluster;
+	signed char		discard_zeroes_data;
 };
 
 struct request_queue
@@ -749,6 +753,17 @@
 #define rq_iter_last(rq, _iter)					\
 		(_iter.bio->bi_next == NULL && _iter.i == _iter.bio->bi_vcnt-1)
 
+#ifndef ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+# error	"You should define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE for your platform"
+#endif
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
+extern void rq_flush_dcache_pages(struct request *rq);
+#else
+static inline void rq_flush_dcache_pages(struct request *rq)
+{
+}
+#endif
+
 extern int blk_register_queue(struct gendisk *disk);
 extern void blk_unregister_queue(struct gendisk *disk);
 extern void register_disk(struct gendisk *dev);
@@ -823,19 +838,6 @@
 	return bdev->bd_disk->queue;
 }
 
-static inline void blk_run_backing_dev(struct backing_dev_info *bdi,
-				       struct page *page)
-{
-	if (bdi && bdi->unplug_io_fn)
-		bdi->unplug_io_fn(bdi, page);
-}
-
-static inline void blk_run_address_space(struct address_space *mapping)
-{
-	if (mapping)
-		blk_run_backing_dev(mapping->backing_dev_info, NULL);
-}
-
 /*
  * blk_rq_pos()			: the current sector
  * blk_rq_bytes()		: bytes left in the entire request
@@ -1134,6 +1136,34 @@
 	return q->limits.alignment_offset;
 }
 
+static inline int queue_discard_alignment(struct request_queue *q)
+{
+	if (q->limits.discard_misaligned)
+		return -1;
+
+	return q->limits.discard_alignment;
+}
+
+static inline int queue_sector_discard_alignment(struct request_queue *q,
+						 sector_t sector)
+{
+	return ((sector << 9) - q->limits.discard_alignment)
+		& (q->limits.discard_granularity - 1);
+}
+
+static inline unsigned int queue_discard_zeroes_data(struct request_queue *q)
+{
+	if (q->limits.discard_zeroes_data == 1)
+		return 1;
+
+	return 0;
+}
+
+static inline unsigned int bdev_discard_zeroes_data(struct block_device *bdev)
+{
+	return queue_discard_zeroes_data(bdev_get_queue(bdev));
+}
+
 static inline int queue_dma_alignment(struct request_queue *q)
 {
 	return q ? q->dma_alignment : 511;
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index dd97fb8..b10ec49 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -53,6 +53,7 @@
 			      unsigned long addr,
 			      unsigned long size);
 extern void free_bootmem(unsigned long addr, unsigned long size);
+extern void free_bootmem_late(unsigned long addr, unsigned long size);
 
 /*
  * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE,
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 9b64b6d..2b31b91 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -1,6 +1,13 @@
-#define PHY_BRCM_WIRESPEED_ENABLE	0x00000001
-#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000002
-#define PHY_BRCM_APD_CLK125_ENABLE	0x00000004
-#define PHY_BRCM_STD_IBND_DISABLE	0x00000008
-#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00000010
-#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00000020
+#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
+#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
+#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
+#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
+#define PHY_BRCM_WIRESPEED_ENABLE	0x00000100
+#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000200
+#define PHY_BRCM_RX_REFCLK_UNUSED	0x00000400
+#define PHY_BRCM_STD_IBND_DISABLE	0x00000800
+#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00001000
+#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
+#define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
+#define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
+#define PHY_BCM_FLAGS_VALID		0x80000000
diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index 25085cb..6c507be 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -32,14 +32,12 @@
  * struct can_proto - CAN protocol structure
  * @type:       type argument in socket() syscall, e.g. SOCK_DGRAM.
  * @protocol:   protocol number in socket() syscall.
- * @capability: capability needed to open the socket, or -1 for no restriction.
  * @ops:        pointer to struct proto_ops for sock->ops.
  * @prot:       pointer to struct proto structure.
  */
 struct can_proto {
 	int              type;
 	int              protocol;
-	int              capability;
 	struct proto_ops *ops;
 	struct proto     *prot;
 };
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 5824b20..1ed2a5c 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -29,8 +29,6 @@
 /*
  * CAN common private data
  */
-#define CAN_ECHO_SKB_MAX  4
-
 struct can_priv {
 	struct can_device_stats can_stats;
 
@@ -44,15 +42,16 @@
 	int restart_ms;
 	struct timer_list restart_timer;
 
-	struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX];
-
 	int (*do_set_bittiming)(struct net_device *dev);
 	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
 	int (*do_get_state)(const struct net_device *dev,
 			    enum can_state *state);
+
+	unsigned int echo_skb_max;
+	struct sk_buff **echo_skb;
 };
 
-struct net_device *alloc_candev(int sizeof_priv);
+struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
 void free_candev(struct net_device *dev);
 
 int open_candev(struct net_device *dev);
@@ -64,8 +63,13 @@
 int can_restart_now(struct net_device *dev);
 void can_bus_off(struct net_device *dev);
 
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx);
-void can_get_echo_skb(struct net_device *dev, int idx);
-void can_free_echo_skb(struct net_device *dev, int idx);
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		      unsigned int idx);
+void can_get_echo_skb(struct net_device *dev, unsigned int idx);
+void can_free_echo_skb(struct net_device *dev, unsigned int idx);
+
+struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
+struct sk_buff *alloc_can_err_skb(struct net_device *dev,
+				  struct can_frame **cf);
 
 #endif /* CAN_DEV_H */
diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h
new file mode 100644
index 0000000..1448177
--- /dev/null
+++ b/include/linux/can/platform/mcp251x.h
@@ -0,0 +1,36 @@
+#ifndef __CAN_PLATFORM_MCP251X_H__
+#define __CAN_PLATFORM_MCP251X_H__
+
+/*
+ *
+ * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ *
+ */
+
+#include <linux/spi/spi.h>
+
+/**
+ * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data
+ * @oscillator_frequency:       - oscillator frequency in Hz
+ * @model:                      - actual type of chip
+ * @board_specific_setup:       - called before probing the chip (power,reset)
+ * @transceiver_enable:         - called to power on/off the transceiver
+ * @power_enable:               - called to power on/off the mcp *and* the
+ *                                transceiver
+ *
+ * Please note that you should define power_enable or transceiver_enable or
+ * none of them. Defining both of them is no use.
+ *
+ */
+
+struct mcp251x_platform_data {
+	unsigned long oscillator_frequency;
+	int model;
+#define CAN_MCP251X_MCP2510 0
+#define CAN_MCP251X_MCP2515 1
+	int (*board_specific_setup)(struct spi_device *spi);
+	int (*transceiver_enable)(int enable);
+	int (*power_enable) (int enable);
+};
+
+#endif /* __CAN_PLATFORM_MCP251X_H__ */
diff --git a/include/linux/can/platform/ti_hecc.h b/include/linux/can/platform/ti_hecc.h
new file mode 100644
index 0000000..4688c7b
--- /dev/null
+++ b/include/linux/can/platform/ti_hecc.h
@@ -0,0 +1,40 @@
+/*
+ * TI HECC (High End CAN Controller) driver platform header
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed as is WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/**
+ * struct hecc_platform_data - HECC Platform Data
+ *
+ * @scc_hecc_offset:	mostly 0 - should really never change
+ * @scc_ram_offset:	SCC RAM offset
+ * @hecc_ram_offset:	HECC RAM offset
+ * @mbx_offset:		Mailbox RAM offset
+ * @int_line:		Interrupt line to use - 0 or 1
+ * @version:		version for future use
+ *
+ * Platform data structure to get all platform specific settings.
+ * this structure also accounts the fact that the IP may have different
+ * RAM and mailbox offsets for different SOC's
+ */
+struct ti_hecc_platform_data {
+	u32 scc_hecc_offset;
+	u32 scc_ram_offset;
+	u32 hecc_ram_offset;
+	u32 mbx_offset;
+	u32 int_line;
+	u32 version;
+};
+
+
diff --git a/include/linux/capability.h b/include/linux/capability.h
index c8f2a5f7..39e5ff5 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -92,9 +92,7 @@
 #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
 #define _KERNEL_CAPABILITY_U32S    _LINUX_CAPABILITY_U32S_3
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
 extern int file_caps_enabled;
-#endif
 
 typedef struct kernel_cap_struct {
 	__u32 cap[_KERNEL_CAPABILITY_U32S];
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h
index 9c8d31b..ccefff0 100644
--- a/include/linux/cgroup_subsys.h
+++ b/include/linux/cgroup_subsys.h
@@ -60,3 +60,9 @@
 #endif
 
 /* */
+
+#ifdef CONFIG_BLK_CGROUP
+SUBSYS(blkio)
+#endif
+
+/* */
diff --git a/include/linux/compat.h b/include/linux/compat.h
index af931ee..ef68119 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -10,6 +10,8 @@
 #include <linux/stat.h>
 #include <linux/param.h>	/* for HZ */
 #include <linux/sem.h>
+#include <linux/socket.h>
+#include <linux/if.h>
 
 #include <asm/compat.h>
 #include <asm/siginfo.h>
@@ -154,6 +156,48 @@
 	} _sigev_un;
 } compat_sigevent_t;
 
+struct compat_ifmap {
+	compat_ulong_t mem_start;
+	compat_ulong_t mem_end;
+	unsigned short base_addr;
+	unsigned char irq;
+	unsigned char dma;
+	unsigned char port;
+};
+
+struct compat_if_settings
+{
+	unsigned int type;	/* Type of physical device or protocol */
+	unsigned int size;	/* Size of the data allocated by the caller */
+	compat_uptr_t ifs_ifsu;	/* union of pointers */
+};
+
+struct compat_ifreq {
+	union {
+		char	ifrn_name[IFNAMSIZ];    /* if name, e.g. "en0" */
+	} ifr_ifrn;
+	union {
+		struct	sockaddr ifru_addr;
+		struct	sockaddr ifru_dstaddr;
+		struct	sockaddr ifru_broadaddr;
+		struct	sockaddr ifru_netmask;
+		struct	sockaddr ifru_hwaddr;
+		short	ifru_flags;
+		compat_int_t	ifru_ivalue;
+		compat_int_t	ifru_mtu;
+		struct	compat_ifmap ifru_map;
+		char	ifru_slave[IFNAMSIZ];   /* Just fits the size */
+		char	ifru_newname[IFNAMSIZ];
+		compat_caddr_t	ifru_data;
+		struct	compat_if_settings ifru_settings;
+	} ifr_ifru;
+};
+
+struct compat_ifconf {
+        compat_int_t	ifc_len;                        /* size of buffer       */
+        compat_caddr_t  ifcbuf;
+};
+
 struct compat_robust_list {
 	compat_uptr_t			next;
 };
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
index a3ed7cb..73dcf80 100644
--- a/include/linux/compiler-gcc.h
+++ b/include/linux/compiler-gcc.h
@@ -79,6 +79,7 @@
 #define  noinline			__attribute__((noinline))
 #define __attribute_const__		__attribute__((__const__))
 #define __maybe_unused			__attribute__((unused))
+#define __always_unused			__attribute__((unused))
 
 #define __gcc_header(x) #x
 #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
index 450fa59..94dea3f 100644
--- a/include/linux/compiler-gcc4.h
+++ b/include/linux/compiler-gcc4.h
@@ -36,4 +36,26 @@
    the kernel context */
 #define __cold			__attribute__((__cold__))
 
+
+#if __GNUC_MINOR__ >= 5
+/*
+ * Mark a position in code as unreachable.  This can be used to
+ * suppress control flow warnings after asm blocks that transfer
+ * control elsewhere.
+ *
+ * Early snapshots of gcc 4.5 don't support this and we can't detect
+ * this in the preprocessor, but we can live with this because they're
+ * unreleased.  Really, we need to have autoconf for the kernel.
+ */
+#define unreachable() __builtin_unreachable()
+#endif
+
+#endif
+
+#if __GNUC_MINOR__ > 0
+#define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
+#endif
+#if __GNUC_MINOR__ >= 4
+#define __compiletime_warning(message) __attribute__((warning(message)))
+#define __compiletime_error(message) __attribute__((error(message)))
 #endif
diff --git a/include/linux/compiler.h b/include/linux/compiler.h
index 04fb513..5be3dab 100644
--- a/include/linux/compiler.h
+++ b/include/linux/compiler.h
@@ -144,6 +144,11 @@
 # define barrier() __memory_barrier()
 #endif
 
+/* Unreachable code */
+#ifndef unreachable
+# define unreachable() do { } while (1)
+#endif
+
 #ifndef RELOC_HIDE
 # define RELOC_HIDE(ptr, off)					\
   ({ unsigned long __ptr;					\
@@ -213,6 +218,10 @@
 # define __maybe_unused		/* unimplemented */
 #endif
 
+#ifndef __always_unused
+# define __always_unused	/* unimplemented */
+#endif
+
 #ifndef noinline
 #define noinline
 #endif
@@ -266,6 +275,17 @@
 # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b))
 #endif
 
+/* Compile time object size, -1 for unknown */
+#ifndef __compiletime_object_size
+# define __compiletime_object_size(obj) -1
+#endif
+#ifndef __compiletime_warning
+# define __compiletime_warning(message)
+#endif
+#ifndef __compiletime_error
+# define __compiletime_error(message)
+#endif
+
 /*
  * Prevent the compiler from merging or refetching accesses.  The compiler
  * is also forbidden from reordering successive instances of ACCESS_ONCE(),
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 3a14615..72ba63e 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -43,6 +43,8 @@
 #define CN_DST_VAL			0x1
 #define CN_IDX_DM			0x7	/* Device Mapper */
 #define CN_VAL_DM_USERSPACE_LOG		0x1
+#define CN_IDX_DRBD			0x8
+#define CN_VAL_DRBD			0x1
 
 #define CN_NETLINK_USERS		8
 
diff --git a/include/linux/cryptohash.h b/include/linux/cryptohash.h
index c118b2ad..ec78a4b 100644
--- a/include/linux/cryptohash.h
+++ b/include/linux/cryptohash.h
@@ -2,6 +2,7 @@
 #define __CRYPTOHASH_H
 
 #define SHA_DIGEST_WORDS 5
+#define SHA_MESSAGE_BYTES (512 /*bits*/ / 8)
 #define SHA_WORKSPACE_WORDS 80
 
 void sha_init(__u32 *buf);
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index 4a2b162..5de4c9e 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -208,16 +208,9 @@
 	u8 include_all:1;		/* include all ports */
 };
 
-/* Intel DMAR  initialization functions */
 extern int intel_iommu_init(void);
-#else
-static inline int intel_iommu_init(void)
-{
-#ifdef CONFIG_INTR_REMAP
-	return dmar_dev_scope_init();
-#else
-	return -ENODEV;
-#endif
-}
-#endif /* !CONFIG_DMAR */
+#else /* !CONFIG_DMAR: */
+static inline int intel_iommu_init(void) { return -ENODEV; }
+#endif /* CONFIG_DMAR */
+
 #endif /* __DMAR_H__ */
diff --git a/include/linux/dn.h b/include/linux/dn.h
index fe99908..9c50445 100644
--- a/include/linux/dn.h
+++ b/include/linux/dn.h
@@ -71,14 +71,12 @@
 /* Structures */
 
 
-struct dn_naddr 
-{
+struct dn_naddr {
 	__le16		a_len;
 	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
 };
 
-struct sockaddr_dn
-{
+struct sockaddr_dn {
 	__u16		sdn_family;
 	__u8		sdn_flags;
 	__u8		sdn_objnum;
@@ -101,8 +99,7 @@
         __u8   opt_data[16];   /* User data              */
 };
 
-struct accessdata_dn
-{
+struct accessdata_dn {
 	__u8		acc_accl;
 	__u8		acc_acc[DN_MAXACCL];
 	__u8 		acc_passl;
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
new file mode 100644
index 0000000..e84f473
--- /dev/null
+++ b/include/linux/drbd.h
@@ -0,0 +1,343 @@
+/*
+  drbd.h
+  Kernel module for 2.6.x Kernels
+
+  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+  Copyright (C) 2001-2008, LINBIT Information Technologies GmbH.
+  Copyright (C) 2001-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+  Copyright (C) 2001-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+  drbd is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2, or (at your option)
+  any later version.
+
+  drbd is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with drbd; see the file COPYING.  If not, write to
+  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+#ifndef DRBD_H
+#define DRBD_H
+#include <linux/connector.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#else
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <limits.h>
+
+/* Altough the Linux source code makes a difference between
+   generic endianness and the bitfields' endianness, there is no
+   architecture as of Linux-2.6.24-rc4 where the bitfileds' endianness
+   does not match the generic endianness. */
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+#define __LITTLE_ENDIAN_BITFIELD
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define __BIG_ENDIAN_BITFIELD
+#else
+# error "sorry, weird endianness on this box"
+#endif
+
+#endif
+
+
+extern const char *drbd_buildtag(void);
+#define REL_VERSION "8.3.6"
+#define API_VERSION 88
+#define PRO_VERSION_MIN 86
+#define PRO_VERSION_MAX 91
+
+
+enum drbd_io_error_p {
+	EP_PASS_ON, /* FIXME should the better be named "Ignore"? */
+	EP_CALL_HELPER,
+	EP_DETACH
+};
+
+enum drbd_fencing_p {
+	FP_DONT_CARE,
+	FP_RESOURCE,
+	FP_STONITH
+};
+
+enum drbd_disconnect_p {
+	DP_RECONNECT,
+	DP_DROP_NET_CONF,
+	DP_FREEZE_IO
+};
+
+enum drbd_after_sb_p {
+	ASB_DISCONNECT,
+	ASB_DISCARD_YOUNGER_PRI,
+	ASB_DISCARD_OLDER_PRI,
+	ASB_DISCARD_ZERO_CHG,
+	ASB_DISCARD_LEAST_CHG,
+	ASB_DISCARD_LOCAL,
+	ASB_DISCARD_REMOTE,
+	ASB_CONSENSUS,
+	ASB_DISCARD_SECONDARY,
+	ASB_CALL_HELPER,
+	ASB_VIOLENTLY
+};
+
+/* KEEP the order, do not delete or insert. Only append. */
+enum drbd_ret_codes {
+	ERR_CODE_BASE		= 100,
+	NO_ERROR		= 101,
+	ERR_LOCAL_ADDR		= 102,
+	ERR_PEER_ADDR		= 103,
+	ERR_OPEN_DISK		= 104,
+	ERR_OPEN_MD_DISK	= 105,
+	ERR_DISK_NOT_BDEV	= 107,
+	ERR_MD_NOT_BDEV		= 108,
+	ERR_DISK_TO_SMALL	= 111,
+	ERR_MD_DISK_TO_SMALL	= 112,
+	ERR_BDCLAIM_DISK	= 114,
+	ERR_BDCLAIM_MD_DISK	= 115,
+	ERR_MD_IDX_INVALID	= 116,
+	ERR_IO_MD_DISK		= 118,
+	ERR_MD_INVALID          = 119,
+	ERR_AUTH_ALG		= 120,
+	ERR_AUTH_ALG_ND		= 121,
+	ERR_NOMEM		= 122,
+	ERR_DISCARD		= 123,
+	ERR_DISK_CONFIGURED	= 124,
+	ERR_NET_CONFIGURED	= 125,
+	ERR_MANDATORY_TAG	= 126,
+	ERR_MINOR_INVALID	= 127,
+	ERR_INTR		= 129, /* EINTR */
+	ERR_RESIZE_RESYNC	= 130,
+	ERR_NO_PRIMARY		= 131,
+	ERR_SYNC_AFTER		= 132,
+	ERR_SYNC_AFTER_CYCLE	= 133,
+	ERR_PAUSE_IS_SET	= 134,
+	ERR_PAUSE_IS_CLEAR	= 135,
+	ERR_PACKET_NR		= 137,
+	ERR_NO_DISK		= 138,
+	ERR_NOT_PROTO_C		= 139,
+	ERR_NOMEM_BITMAP	= 140,
+	ERR_INTEGRITY_ALG	= 141, /* DRBD 8.2 only */
+	ERR_INTEGRITY_ALG_ND	= 142, /* DRBD 8.2 only */
+	ERR_CPU_MASK_PARSE	= 143, /* DRBD 8.2 only */
+	ERR_CSUMS_ALG		= 144, /* DRBD 8.2 only */
+	ERR_CSUMS_ALG_ND	= 145, /* DRBD 8.2 only */
+	ERR_VERIFY_ALG		= 146, /* DRBD 8.2 only */
+	ERR_VERIFY_ALG_ND	= 147, /* DRBD 8.2 only */
+	ERR_CSUMS_RESYNC_RUNNING= 148, /* DRBD 8.2 only */
+	ERR_VERIFY_RUNNING	= 149, /* DRBD 8.2 only */
+	ERR_DATA_NOT_CURRENT	= 150,
+	ERR_CONNECTED		= 151, /* DRBD 8.3 only */
+	ERR_PERM		= 152,
+
+	/* insert new ones above this line */
+	AFTER_LAST_ERR_CODE
+};
+
+#define DRBD_PROT_A   1
+#define DRBD_PROT_B   2
+#define DRBD_PROT_C   3
+
+enum drbd_role {
+	R_UNKNOWN = 0,
+	R_PRIMARY = 1,     /* role */
+	R_SECONDARY = 2,   /* role */
+	R_MASK = 3,
+};
+
+/* The order of these constants is important.
+ * The lower ones (<C_WF_REPORT_PARAMS) indicate
+ * that there is no socket!
+ * >=C_WF_REPORT_PARAMS ==> There is a socket
+ */
+enum drbd_conns {
+	C_STANDALONE,
+	C_DISCONNECTING,  /* Temporal state on the way to StandAlone. */
+	C_UNCONNECTED,    /* >= C_UNCONNECTED -> inc_net() succeeds */
+
+	/* These temporal states are all used on the way
+	 * from >= C_CONNECTED to Unconnected.
+	 * The 'disconnect reason' states
+	 * I do not allow to change beween them. */
+	C_TIMEOUT,
+	C_BROKEN_PIPE,
+	C_NETWORK_FAILURE,
+	C_PROTOCOL_ERROR,
+	C_TEAR_DOWN,
+
+	C_WF_CONNECTION,
+	C_WF_REPORT_PARAMS, /* we have a socket */
+	C_CONNECTED,      /* we have introduced each other */
+	C_STARTING_SYNC_S,  /* starting full sync by admin request. */
+	C_STARTING_SYNC_T,  /* stariing full sync by admin request. */
+	C_WF_BITMAP_S,
+	C_WF_BITMAP_T,
+	C_WF_SYNC_UUID,
+
+	/* All SyncStates are tested with this comparison
+	 * xx >= C_SYNC_SOURCE && xx <= C_PAUSED_SYNC_T */
+	C_SYNC_SOURCE,
+	C_SYNC_TARGET,
+	C_VERIFY_S,
+	C_VERIFY_T,
+	C_PAUSED_SYNC_S,
+	C_PAUSED_SYNC_T,
+	C_MASK = 31
+};
+
+enum drbd_disk_state {
+	D_DISKLESS,
+	D_ATTACHING,      /* In the process of reading the meta-data */
+	D_FAILED,         /* Becomes D_DISKLESS as soon as we told it the peer */
+			/* when >= D_FAILED it is legal to access mdev->bc */
+	D_NEGOTIATING,    /* Late attaching state, we need to talk to the peer */
+	D_INCONSISTENT,
+	D_OUTDATED,
+	D_UNKNOWN,       /* Only used for the peer, never for myself */
+	D_CONSISTENT,     /* Might be D_OUTDATED, might be D_UP_TO_DATE ... */
+	D_UP_TO_DATE,       /* Only this disk state allows applications' IO ! */
+	D_MASK = 15
+};
+
+union drbd_state {
+/* According to gcc's docs is the ...
+ * The order of allocation of bit-fields within a unit (C90 6.5.2.1, C99 6.7.2.1).
+ * Determined by ABI.
+ * pointed out by Maxim Uvarov q<muvarov@ru.mvista.com>
+ * even though we transmit as "cpu_to_be32(state)",
+ * the offsets of the bitfields still need to be swapped
+ * on different endianess.
+ */
+	struct {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+		unsigned role:2 ;   /* 3/4	 primary/secondary/unknown */
+		unsigned peer:2 ;   /* 3/4	 primary/secondary/unknown */
+		unsigned conn:5 ;   /* 17/32	 cstates */
+		unsigned disk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned pdsk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned susp:1 ;   /* 2/2	 IO suspended  no/yes */
+		unsigned aftr_isp:1 ; /* isp .. imposed sync pause */
+		unsigned peer_isp:1 ;
+		unsigned user_isp:1 ;
+		unsigned _pad:11;   /* 0	 unused */
+#elif defined(__BIG_ENDIAN_BITFIELD)
+		unsigned _pad:11;   /* 0	 unused */
+		unsigned user_isp:1 ;
+		unsigned peer_isp:1 ;
+		unsigned aftr_isp:1 ; /* isp .. imposed sync pause */
+		unsigned susp:1 ;   /* 2/2	 IO suspended  no/yes */
+		unsigned pdsk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned disk:4 ;   /* 8/16	 from D_DISKLESS to D_UP_TO_DATE */
+		unsigned conn:5 ;   /* 17/32	 cstates */
+		unsigned peer:2 ;   /* 3/4	 primary/secondary/unknown */
+		unsigned role:2 ;   /* 3/4	 primary/secondary/unknown */
+#else
+# error "this endianess is not supported"
+#endif
+	};
+	unsigned int i;
+};
+
+enum drbd_state_ret_codes {
+	SS_CW_NO_NEED = 4,
+	SS_CW_SUCCESS = 3,
+	SS_NOTHING_TO_DO = 2,
+	SS_SUCCESS = 1,
+	SS_UNKNOWN_ERROR = 0, /* Used to sleep longer in _drbd_request_state */
+	SS_TWO_PRIMARIES = -1,
+	SS_NO_UP_TO_DATE_DISK = -2,
+	SS_NO_LOCAL_DISK = -4,
+	SS_NO_REMOTE_DISK = -5,
+	SS_CONNECTED_OUTDATES = -6,
+	SS_PRIMARY_NOP = -7,
+	SS_RESYNC_RUNNING = -8,
+	SS_ALREADY_STANDALONE = -9,
+	SS_CW_FAILED_BY_PEER = -10,
+	SS_IS_DISKLESS = -11,
+	SS_DEVICE_IN_USE = -12,
+	SS_NO_NET_CONFIG = -13,
+	SS_NO_VERIFY_ALG = -14,       /* drbd-8.2 only */
+	SS_NEED_CONNECTION = -15,    /* drbd-8.2 only */
+	SS_LOWER_THAN_OUTDATED = -16,
+	SS_NOT_SUPPORTED = -17,      /* drbd-8.2 only */
+	SS_IN_TRANSIENT_STATE = -18,  /* Retry after the next state change */
+	SS_CONCURRENT_ST_CHG = -19,   /* Concurrent cluster side state change! */
+	SS_AFTER_LAST_ERROR = -20,    /* Keep this at bottom */
+};
+
+/* from drbd_strings.c */
+extern const char *drbd_conn_str(enum drbd_conns);
+extern const char *drbd_role_str(enum drbd_role);
+extern const char *drbd_disk_str(enum drbd_disk_state);
+extern const char *drbd_set_st_err_str(enum drbd_state_ret_codes);
+
+#define SHARED_SECRET_MAX 64
+
+#define MDF_CONSISTENT		(1 << 0)
+#define MDF_PRIMARY_IND		(1 << 1)
+#define MDF_CONNECTED_IND	(1 << 2)
+#define MDF_FULL_SYNC		(1 << 3)
+#define MDF_WAS_UP_TO_DATE	(1 << 4)
+#define MDF_PEER_OUT_DATED	(1 << 5)
+#define MDF_CRASHED_PRIMARY     (1 << 6)
+
+enum drbd_uuid_index {
+	UI_CURRENT,
+	UI_BITMAP,
+	UI_HISTORY_START,
+	UI_HISTORY_END,
+	UI_SIZE,      /* nl-packet: number of dirty bits */
+	UI_FLAGS,     /* nl-packet: flags */
+	UI_EXTENDED_SIZE   /* Everything. */
+};
+
+enum drbd_timeout_flag {
+	UT_DEFAULT      = 0,
+	UT_DEGRADED     = 1,
+	UT_PEER_OUTDATED = 2,
+};
+
+#define UUID_JUST_CREATED ((__u64)4)
+
+#define DRBD_MAGIC 0x83740267
+#define BE_DRBD_MAGIC __constant_cpu_to_be32(DRBD_MAGIC)
+
+/* these are of type "int" */
+#define DRBD_MD_INDEX_INTERNAL -1
+#define DRBD_MD_INDEX_FLEX_EXT -2
+#define DRBD_MD_INDEX_FLEX_INT -3
+
+/* Start of the new netlink/connector stuff */
+
+#define DRBD_NL_CREATE_DEVICE 0x01
+#define DRBD_NL_SET_DEFAULTS  0x02
+
+
+/* For searching a vacant cn_idx value */
+#define CN_IDX_STEP			6977
+
+struct drbd_nl_cfg_req {
+	int packet_type;
+	unsigned int drbd_minor;
+	int flags;
+	unsigned short tag_list[];
+};
+
+struct drbd_nl_cfg_reply {
+	int packet_type;
+	unsigned int minor;
+	int ret_code; /* enum ret_code or set_st_err_t */
+	unsigned short tag_list[]; /* only used with get_* calls */
+};
+
+#endif
diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h
new file mode 100644
index 0000000..51f47a5
--- /dev/null
+++ b/include/linux/drbd_limits.h
@@ -0,0 +1,137 @@
+/*
+  drbd_limits.h
+  This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+*/
+
+/*
+ * Our current limitations.
+ * Some of them are hard limits,
+ * some of them are arbitrary range limits, that make it easier to provide
+ * feedback about nonsense settings for certain configurable values.
+ */
+
+#ifndef DRBD_LIMITS_H
+#define DRBD_LIMITS_H 1
+
+#define DEBUG_RANGE_CHECK 0
+
+#define DRBD_MINOR_COUNT_MIN 1
+#define DRBD_MINOR_COUNT_MAX 255
+
+#define DRBD_DIALOG_REFRESH_MIN 0
+#define DRBD_DIALOG_REFRESH_MAX 600
+
+/* valid port number */
+#define DRBD_PORT_MIN 1
+#define DRBD_PORT_MAX 0xffff
+
+/* startup { */
+  /* if you want more than 3.4 days, disable */
+#define DRBD_WFC_TIMEOUT_MIN 0
+#define DRBD_WFC_TIMEOUT_MAX 300000
+#define DRBD_WFC_TIMEOUT_DEF 0
+
+#define DRBD_DEGR_WFC_TIMEOUT_MIN 0
+#define DRBD_DEGR_WFC_TIMEOUT_MAX 300000
+#define DRBD_DEGR_WFC_TIMEOUT_DEF 0
+
+#define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0
+#define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000
+#define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0
+/* }*/
+
+/* net { */
+  /* timeout, unit centi seconds
+   * more than one minute timeout is not usefull */
+#define DRBD_TIMEOUT_MIN 1
+#define DRBD_TIMEOUT_MAX 600
+#define DRBD_TIMEOUT_DEF 60       /* 6 seconds */
+
+  /* active connection retries when C_WF_CONNECTION */
+#define DRBD_CONNECT_INT_MIN 1
+#define DRBD_CONNECT_INT_MAX 120
+#define DRBD_CONNECT_INT_DEF 10   /* seconds */
+
+  /* keep-alive probes when idle */
+#define DRBD_PING_INT_MIN 1
+#define DRBD_PING_INT_MAX 120
+#define DRBD_PING_INT_DEF 10
+
+ /* timeout for the ping packets.*/
+#define DRBD_PING_TIMEO_MIN  1
+#define DRBD_PING_TIMEO_MAX  100
+#define DRBD_PING_TIMEO_DEF  5
+
+  /* max number of write requests between write barriers */
+#define DRBD_MAX_EPOCH_SIZE_MIN 1
+#define DRBD_MAX_EPOCH_SIZE_MAX 20000
+#define DRBD_MAX_EPOCH_SIZE_DEF 2048
+
+  /* I don't think that a tcp send buffer of more than 10M is usefull */
+#define DRBD_SNDBUF_SIZE_MIN  0
+#define DRBD_SNDBUF_SIZE_MAX  (10<<20)
+#define DRBD_SNDBUF_SIZE_DEF  0
+
+#define DRBD_RCVBUF_SIZE_MIN  0
+#define DRBD_RCVBUF_SIZE_MAX  (10<<20)
+#define DRBD_RCVBUF_SIZE_DEF  0
+
+  /* @4k PageSize -> 128kB - 512MB */
+#define DRBD_MAX_BUFFERS_MIN  32
+#define DRBD_MAX_BUFFERS_MAX  131072
+#define DRBD_MAX_BUFFERS_DEF  2048
+
+  /* @4k PageSize -> 4kB - 512MB */
+#define DRBD_UNPLUG_WATERMARK_MIN  1
+#define DRBD_UNPLUG_WATERMARK_MAX  131072
+#define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16)
+
+  /* 0 is disabled.
+   * 200 should be more than enough even for very short timeouts */
+#define DRBD_KO_COUNT_MIN  0
+#define DRBD_KO_COUNT_MAX  200
+#define DRBD_KO_COUNT_DEF  0
+/* } */
+
+/* syncer { */
+  /* FIXME allow rate to be zero? */
+#define DRBD_RATE_MIN 1
+/* channel bonding 10 GbE, or other hardware */
+#define DRBD_RATE_MAX (4 << 20)
+#define DRBD_RATE_DEF 250  /* kb/second */
+
+  /* less than 7 would hit performance unneccessarily.
+   * 3833 is the largest prime that still does fit
+   * into 64 sectors of activity log */
+#define DRBD_AL_EXTENTS_MIN  7
+#define DRBD_AL_EXTENTS_MAX  3833
+#define DRBD_AL_EXTENTS_DEF  127
+
+#define DRBD_AFTER_MIN  -1
+#define DRBD_AFTER_MAX  255
+#define DRBD_AFTER_DEF  -1
+
+/* } */
+
+/* drbdsetup XY resize -d Z
+ * you are free to reduce the device size to nothing, if you want to.
+ * the upper limit with 64bit kernel, enough ram and flexible meta data
+ * is 16 TB, currently. */
+/* DRBD_MAX_SECTORS */
+#define DRBD_DISK_SIZE_SECT_MIN  0
+#define DRBD_DISK_SIZE_SECT_MAX  (16 * (2LLU << 30))
+#define DRBD_DISK_SIZE_SECT_DEF  0 /* = disabled = no user size... */
+
+#define DRBD_ON_IO_ERROR_DEF EP_PASS_ON
+#define DRBD_FENCING_DEF FP_DONT_CARE
+#define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT
+#define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT
+#define DRBD_AFTER_SB_2P_DEF ASB_DISCONNECT
+#define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT
+
+#define DRBD_MAX_BIO_BVECS_MIN 0
+#define DRBD_MAX_BIO_BVECS_MAX 128
+#define DRBD_MAX_BIO_BVECS_DEF 0
+
+#undef RANGE
+#endif
diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h
new file mode 100644
index 0000000..db5721a
--- /dev/null
+++ b/include/linux/drbd_nl.h
@@ -0,0 +1,137 @@
+/*
+   PAKET( name,
+	  TYPE ( pn, pr, member )
+	  ...
+   )
+
+   You may never reissue one of the pn arguments
+*/
+
+#if !defined(NL_PACKET) || !defined(NL_STRING) || !defined(NL_INTEGER) || !defined(NL_BIT) || !defined(NL_INT64)
+#error "The macros NL_PACKET, NL_STRING, NL_INTEGER, NL_INT64 and NL_BIT needs to be defined"
+#endif
+
+NL_PACKET(primary, 1,
+       NL_BIT(		1,	T_MAY_IGNORE,	overwrite_peer)
+)
+
+NL_PACKET(secondary, 2, )
+
+NL_PACKET(disk_conf, 3,
+	NL_INT64(	2,	T_MAY_IGNORE,	disk_size)
+	NL_STRING(	3,	T_MANDATORY,	backing_dev,	128)
+	NL_STRING(	4,	T_MANDATORY,	meta_dev,	128)
+	NL_INTEGER(	5,	T_MANDATORY,	meta_dev_idx)
+	NL_INTEGER(	6,	T_MAY_IGNORE,	on_io_error)
+	NL_INTEGER(	7,	T_MAY_IGNORE,	fencing)
+	NL_BIT(		37,	T_MAY_IGNORE,	use_bmbv)
+	NL_BIT(		53,	T_MAY_IGNORE,	no_disk_flush)
+	NL_BIT(		54,	T_MAY_IGNORE,	no_md_flush)
+	  /*  55 max_bio_size was available in 8.2.6rc2 */
+	NL_INTEGER(	56,	T_MAY_IGNORE,	max_bio_bvecs)
+	NL_BIT(		57,	T_MAY_IGNORE,	no_disk_barrier)
+	NL_BIT(		58,	T_MAY_IGNORE,	no_disk_drain)
+)
+
+NL_PACKET(detach, 4, )
+
+NL_PACKET(net_conf, 5,
+	NL_STRING(	8,	T_MANDATORY,	my_addr,	128)
+	NL_STRING(	9,	T_MANDATORY,	peer_addr,	128)
+	NL_STRING(	10,	T_MAY_IGNORE,	shared_secret,	SHARED_SECRET_MAX)
+	NL_STRING(	11,	T_MAY_IGNORE,	cram_hmac_alg,	SHARED_SECRET_MAX)
+	NL_STRING(	44,	T_MAY_IGNORE,	integrity_alg,	SHARED_SECRET_MAX)
+	NL_INTEGER(	14,	T_MAY_IGNORE,	timeout)
+	NL_INTEGER(	15,	T_MANDATORY,	wire_protocol)
+	NL_INTEGER(	16,	T_MAY_IGNORE,	try_connect_int)
+	NL_INTEGER(	17,	T_MAY_IGNORE,	ping_int)
+	NL_INTEGER(	18,	T_MAY_IGNORE,	max_epoch_size)
+	NL_INTEGER(	19,	T_MAY_IGNORE,	max_buffers)
+	NL_INTEGER(	20,	T_MAY_IGNORE,	unplug_watermark)
+	NL_INTEGER(	21,	T_MAY_IGNORE,	sndbuf_size)
+	NL_INTEGER(	22,	T_MAY_IGNORE,	ko_count)
+	NL_INTEGER(	24,	T_MAY_IGNORE,	after_sb_0p)
+	NL_INTEGER(	25,	T_MAY_IGNORE,	after_sb_1p)
+	NL_INTEGER(	26,	T_MAY_IGNORE,	after_sb_2p)
+	NL_INTEGER(	39,	T_MAY_IGNORE,	rr_conflict)
+	NL_INTEGER(	40,	T_MAY_IGNORE,	ping_timeo)
+	NL_INTEGER(	67,	T_MAY_IGNORE,	rcvbuf_size)
+	  /* 59 addr_family was available in GIT, never released */
+	NL_BIT(		60,	T_MANDATORY,	mind_af)
+	NL_BIT(		27,	T_MAY_IGNORE,	want_lose)
+	NL_BIT(		28,	T_MAY_IGNORE,	two_primaries)
+	NL_BIT(		41,	T_MAY_IGNORE,	always_asbp)
+	NL_BIT(		61,	T_MAY_IGNORE,	no_cork)
+	NL_BIT(		62,	T_MANDATORY,	auto_sndbuf_size)
+)
+
+NL_PACKET(disconnect, 6, )
+
+NL_PACKET(resize, 7,
+	NL_INT64(		29,	T_MAY_IGNORE,	resize_size)
+)
+
+NL_PACKET(syncer_conf, 8,
+	NL_INTEGER(	30,	T_MAY_IGNORE,	rate)
+	NL_INTEGER(	31,	T_MAY_IGNORE,	after)
+	NL_INTEGER(	32,	T_MAY_IGNORE,	al_extents)
+	NL_STRING(      52,     T_MAY_IGNORE,   verify_alg,     SHARED_SECRET_MAX)
+	NL_STRING(      51,     T_MAY_IGNORE,   cpu_mask,       32)
+	NL_STRING(	64,	T_MAY_IGNORE,	csums_alg,	SHARED_SECRET_MAX)
+	NL_BIT(         65,     T_MAY_IGNORE,   use_rle)
+)
+
+NL_PACKET(invalidate, 9, )
+NL_PACKET(invalidate_peer, 10, )
+NL_PACKET(pause_sync, 11, )
+NL_PACKET(resume_sync, 12, )
+NL_PACKET(suspend_io, 13, )
+NL_PACKET(resume_io, 14, )
+NL_PACKET(outdate, 15, )
+NL_PACKET(get_config, 16, )
+NL_PACKET(get_state, 17,
+	NL_INTEGER(	33,	T_MAY_IGNORE,	state_i)
+)
+
+NL_PACKET(get_uuids, 18,
+	NL_STRING(	34,	T_MAY_IGNORE,	uuids,	(UI_SIZE*sizeof(__u64)))
+	NL_INTEGER(	35,	T_MAY_IGNORE,	uuids_flags)
+)
+
+NL_PACKET(get_timeout_flag, 19,
+	NL_BIT(		36,	T_MAY_IGNORE,	use_degraded)
+)
+
+NL_PACKET(call_helper, 20,
+	NL_STRING(	38,	T_MAY_IGNORE,	helper,		32)
+)
+
+/* Tag nr 42 already allocated in drbd-8.1 development. */
+
+NL_PACKET(sync_progress, 23,
+	NL_INTEGER(	43,	T_MAY_IGNORE,	sync_progress)
+)
+
+NL_PACKET(dump_ee, 24,
+	NL_STRING(	45,	T_MAY_IGNORE,	dump_ee_reason, 32)
+	NL_STRING(	46,	T_MAY_IGNORE,	seen_digest, SHARED_SECRET_MAX)
+	NL_STRING(	47,	T_MAY_IGNORE,	calc_digest, SHARED_SECRET_MAX)
+	NL_INT64(	48,	T_MAY_IGNORE,	ee_sector)
+	NL_INT64(	49,	T_MAY_IGNORE,	ee_block_id)
+	NL_STRING(	50,	T_MAY_IGNORE,	ee_data,	32 << 10)
+)
+
+NL_PACKET(start_ov, 25,
+	NL_INT64(	66,	T_MAY_IGNORE,	start_sector)
+)
+
+NL_PACKET(new_c_uuid, 26,
+       NL_BIT(		63,	T_MANDATORY,	clear_bm)
+)
+
+#undef NL_PACKET
+#undef NL_INTEGER
+#undef NL_INT64
+#undef NL_BIT
+#undef NL_STRING
+
diff --git a/include/linux/drbd_tag_magic.h b/include/linux/drbd_tag_magic.h
new file mode 100644
index 0000000..fcdff84
--- /dev/null
+++ b/include/linux/drbd_tag_magic.h
@@ -0,0 +1,83 @@
+#ifndef DRBD_TAG_MAGIC_H
+#define DRBD_TAG_MAGIC_H
+
+#define TT_END     0
+#define TT_REMOVED 0xE000
+
+/* declare packet_type enums */
+enum packet_types {
+#define NL_PACKET(name, number, fields) P_ ## name = number,
+#define NL_INTEGER(pn, pr, member)
+#define NL_INT64(pn, pr, member)
+#define NL_BIT(pn, pr, member)
+#define NL_STRING(pn, pr, member, len)
+#include "drbd_nl.h"
+	P_nl_after_last_packet,
+};
+
+/* These struct are used to deduce the size of the tag lists: */
+#define NL_PACKET(name, number, fields)	\
+	struct name ## _tag_len_struct { fields };
+#define NL_INTEGER(pn, pr, member)		\
+	int member; int tag_and_len ## member;
+#define NL_INT64(pn, pr, member)		\
+	__u64 member; int tag_and_len ## member;
+#define NL_BIT(pn, pr, member)		\
+	unsigned char member:1; int tag_and_len ## member;
+#define NL_STRING(pn, pr, member, len)	\
+	unsigned char member[len]; int member ## _len; \
+	int tag_and_len ## member;
+#include "linux/drbd_nl.h"
+
+/* declate tag-list-sizes */
+static const int tag_list_sizes[] = {
+#define NL_PACKET(name, number, fields) 2 fields ,
+#define NL_INTEGER(pn, pr, member)      + 4 + 4
+#define NL_INT64(pn, pr, member)        + 4 + 8
+#define NL_BIT(pn, pr, member)          + 4 + 1
+#define NL_STRING(pn, pr, member, len)  + 4 + (len)
+#include "drbd_nl.h"
+};
+
+/* The two highest bits are used for the tag type */
+#define TT_MASK      0xC000
+#define TT_INTEGER   0x0000
+#define TT_INT64     0x4000
+#define TT_BIT       0x8000
+#define TT_STRING    0xC000
+/* The next bit indicates if processing of the tag is mandatory */
+#define T_MANDATORY  0x2000
+#define T_MAY_IGNORE 0x0000
+#define TN_MASK      0x1fff
+/* The remaining 13 bits are used to enumerate the tags */
+
+#define tag_type(T)   ((T) & TT_MASK)
+#define tag_number(T) ((T) & TN_MASK)
+
+/* declare tag enums */
+#define NL_PACKET(name, number, fields) fields
+enum drbd_tags {
+#define NL_INTEGER(pn, pr, member)     T_ ## member = pn | TT_INTEGER | pr ,
+#define NL_INT64(pn, pr, member)       T_ ## member = pn | TT_INT64   | pr ,
+#define NL_BIT(pn, pr, member)         T_ ## member = pn | TT_BIT     | pr ,
+#define NL_STRING(pn, pr, member, len) T_ ## member = pn | TT_STRING  | pr ,
+#include "drbd_nl.h"
+};
+
+struct tag {
+	const char *name;
+	int type_n_flags;
+	int max_len;
+};
+
+/* declare tag names */
+#define NL_PACKET(name, number, fields) fields
+static const struct tag tag_descriptions[] = {
+#define NL_INTEGER(pn, pr, member)     [ pn ] = { #member, TT_INTEGER | pr, sizeof(int)   },
+#define NL_INT64(pn, pr, member)       [ pn ] = { #member, TT_INT64   | pr, sizeof(__u64) },
+#define NL_BIT(pn, pr, member)         [ pn ] = { #member, TT_BIT     | pr, sizeof(int)   },
+#define NL_STRING(pn, pr, member, len) [ pn ] = { #member, TT_STRING  | pr, (len)         },
+#include "drbd_nl.h"
+};
+
+#endif
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index ec12cc743..034072c 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -3,8 +3,7 @@
 
 #include <linux/types.h>
 
-struct sock_extended_err
-{
+struct sock_extended_err {
 	__u32	ee_errno;	
 	__u8	ee_origin;
 	__u8	ee_type;
@@ -31,8 +30,7 @@
 
 #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
 
-struct sock_exterr_skb
-{
+struct sock_exterr_skb {
 	union {
 		struct inet_skb_parm	h4;
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 15e4eb7..ef4a2d8 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -49,13 +49,14 @@
 	return (ep->speed_hi << 16) | ep->speed;
 }
 
+#define ETHTOOL_FWVERS_LEN	32
 #define ETHTOOL_BUSINFO_LEN	32
 /* these strings are set to whatever the driver author decides... */
 struct ethtool_drvinfo {
 	__u32	cmd;
 	char	driver[32];	/* driver short name, "tulip", "eepro100" */
 	char	version[32];	/* driver version string */
-	char	fw_version[32];	/* firmware version string, if applicable */
+	char	fw_version[ETHTOOL_FWVERS_LEN];	/* firmware version string */
 	char	bus_info[ETHTOOL_BUSINFO_LEN];	/* Bus info for this IF. */
 				/* For PCI devices, use pci_name(pci_dev). */
 	char	reserved1[32];
@@ -495,13 +496,10 @@
 	u32     (*get_priv_flags)(struct net_device *);
 	int     (*set_priv_flags)(struct net_device *, u32);
 	int	(*get_sset_count)(struct net_device *, int);
-
-	/* the following hooks are obsolete */
-	int	(*self_test_count)(struct net_device *);/* use get_sset_count */
-	int	(*get_stats_count)(struct net_device *);/* use get_sset_count */
 	int	(*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
 	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 	int     (*flash_device)(struct net_device *, struct ethtool_flash *);
+	int	(*reset)(struct net_device *, u32 *);
 };
 #endif /* __KERNEL__ */
 
@@ -559,6 +557,7 @@
 #define	ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
 #define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
 #define	ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define	ETHTOOL_RESET		0x00000034 /* Reset hardware */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
@@ -633,6 +632,8 @@
 #define PORT_MII		0x02
 #define PORT_FIBRE		0x03
 #define PORT_BNC		0x04
+#define PORT_DA			0x05
+#define PORT_NONE		0xef
 #define PORT_OTHER		0xff
 
 /* Which transceiver to use. */
@@ -676,6 +677,8 @@
 #define	AH_V6_FLOW	0x0b
 #define	ESP_V6_FLOW	0x0c
 #define	IP_USER_FLOW	0x0d
+#define IPV4_FLOW       0x10
+#define IPV6_FLOW       0x11
 
 /* L3-L4 network traffic flow hash options */
 #define	RXH_L2DA	(1 << 1)
@@ -689,4 +692,34 @@
 
 #define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
 
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h
index 87b606b..51da65b 100644
--- a/include/linux/fib_rules.h
+++ b/include/linux/fib_rules.h
@@ -8,13 +8,14 @@
 #define FIB_RULE_PERMANENT	0x00000001
 #define FIB_RULE_INVERT		0x00000002
 #define FIB_RULE_UNRESOLVED	0x00000004
-#define FIB_RULE_DEV_DETACHED	0x00000008
+#define FIB_RULE_IIF_DETACHED	0x00000008
+#define FIB_RULE_DEV_DETACHED	FIB_RULE_IIF_DETACHED
+#define FIB_RULE_OIF_DETACHED	0x00000010
 
 /* try to find source address in routing lookups */
 #define FIB_RULE_FIND_SADDR	0x00010000
 
-struct fib_rule_hdr
-{
+struct fib_rule_hdr {
 	__u8		family;
 	__u8		dst_len;
 	__u8		src_len;
@@ -28,12 +29,12 @@
 	__u32		flags;
 };
 
-enum
-{
+enum {
 	FRA_UNSPEC,
 	FRA_DST,	/* destination address */
 	FRA_SRC,	/* source address */
-	FRA_IFNAME,	/* interface name */
+	FRA_IIFNAME,	/* interface name */
+#define FRA_IFNAME	FRA_IIFNAME
 	FRA_GOTO,	/* target to jump to (FR_ACT_GOTO) */
 	FRA_UNUSED2,
 	FRA_PRIORITY,	/* priority/preference */
@@ -47,13 +48,13 @@
 	FRA_UNUSED8,
 	FRA_TABLE,	/* Extended table id */
 	FRA_FWMASK,	/* mask for netfilter mark */
+	FRA_OIFNAME,
 	__FRA_MAX
 };
 
 #define FRA_MAX (__FRA_MAX - 1)
 
-enum
-{
+enum {
 	FR_ACT_UNSPEC,
 	FR_ACT_TO_TBL,		/* Pass to fixed table */
 	FR_ACT_GOTO,		/* Jump to another rule */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 1354aaf..29a0e3d 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -23,16 +23,14 @@
  *	the BPF code definitions which need to match so you can share filters
  */
  
-struct sock_filter	/* Filter block */
-{
+struct sock_filter {	/* Filter block */
 	__u16	code;   /* Actual filter code */
 	__u8	jt;	/* Jump true */
 	__u8	jf;	/* Jump false */
 	__u32	k;      /* Generic multiuse field */
 };
 
-struct sock_fprog	/* Required for SO_ATTACH_FILTER. */
-{
+struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
 	unsigned short		len;	/* Number of filter blocks */
 	struct sock_filter __user *filter;
 };
@@ -123,7 +121,9 @@
 #define SKF_AD_IFINDEX 	8
 #define SKF_AD_NLATTR	12
 #define SKF_AD_NLATTR_NEST	16
-#define SKF_AD_MAX	20
+#define SKF_AD_MARK 	20
+#define SKF_AD_QUEUE	24
+#define SKF_AD_MAX	28
 #define SKF_NET_OFF   (-0x100000)
 #define SKF_LL_OFF    (-0x200000)
 
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index 7e1d4de..9416a46 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -20,20 +20,6 @@
 #define fw_notify(s, args...) printk(KERN_NOTICE KBUILD_MODNAME ": " s, ## args)
 #define fw_error(s, args...) printk(KERN_ERR KBUILD_MODNAME ": " s, ## args)
 
-static inline void fw_memcpy_from_be32(void *_dst, void *_src, size_t size)
-{
-	u32    *dst = _dst;
-	__be32 *src = _src;
-	int i;
-
-	for (i = 0; i < size / 4; i++)
-		dst[i] = be32_to_cpu(src[i]);
-}
-
-static inline void fw_memcpy_to_be32(void *_dst, void *_src, size_t size)
-{
-	fw_memcpy_from_be32(_dst, _src, size);
-}
 #define CSR_REGISTER_BASE		0xfffff0000000ULL
 
 /* register offsets are relative to CSR_REGISTER_BASE */
@@ -131,7 +117,7 @@
 
 	bool broadcast_channel_allocated;
 	u32 broadcast_channel;
-	u32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
+	__be32 topology_map[(CSR_TOPOLOGY_MAP_END - CSR_TOPOLOGY_MAP) / 4];
 };
 
 struct fw_attribute_group {
@@ -281,6 +267,7 @@
 	void *payload;
 	size_t payload_length;
 	dma_addr_t payload_bus;
+	bool payload_mapped;
 	u32 timestamp;
 
 	/*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 2620a8c..891f7d6 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -129,7 +129,7 @@
  * WRITE_SYNC		Like WRITE_SYNC_PLUG, but also unplugs the device
  *			immediately after submission. The write equivalent
  *			of READ_SYNC.
- * WRITE_ODIRECT	Special case write for O_DIRECT only.
+ * WRITE_ODIRECT_PLUG	Special case write for O_DIRECT only.
  * SWRITE_SYNC
  * SWRITE_SYNC_PLUG	Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
  *			See SWRITE.
@@ -151,7 +151,7 @@
 #define READ_META	(READ | (1 << BIO_RW_META))
 #define WRITE_SYNC_PLUG	(WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
 #define WRITE_SYNC	(WRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
-#define WRITE_ODIRECT	(WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG))
+#define WRITE_ODIRECT_PLUG	(WRITE | (1 << BIO_RW_SYNCIO))
 #define SWRITE_SYNC_PLUG	\
 			(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
 #define SWRITE_SYNC	(SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
@@ -304,6 +304,7 @@
 #define BLKIOOPT _IO(0x12,121)
 #define BLKALIGNOFF _IO(0x12,122)
 #define BLKPBSZGET _IO(0x12,123)
+#define BLKDISCARDZEROES _IO(0x12,124)
 
 #define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
 #define FIBMAP	   _IO(0x00,1)	/* bmap access */
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h
index 84d3532..7be0c6f 100644
--- a/include/linux/fscache-cache.h
+++ b/include/linux/fscache-cache.h
@@ -91,6 +91,8 @@
 #define FSCACHE_OP_WAITING	4	/* cleared when op is woken */
 #define FSCACHE_OP_EXCLUSIVE	5	/* exclusive op, other ops must wait */
 #define FSCACHE_OP_DEAD		6	/* op is now dead */
+#define FSCACHE_OP_DEC_READ_CNT	7	/* decrement object->n_reads on destruction */
+#define FSCACHE_OP_KEEP_FLAGS	0xc0	/* flags to keep when repurposing an op */
 
 	atomic_t		usage;
 	unsigned		debug_id;	/* debugging ID */
@@ -102,6 +104,16 @@
 
 	/* operation releaser */
 	fscache_operation_release_t release;
+
+#ifdef CONFIG_SLOW_WORK_PROC
+	const char *name;		/* operation name */
+	const char *state;		/* operation state */
+#define fscache_set_op_name(OP, N)	do { (OP)->name  = (N); } while(0)
+#define fscache_set_op_state(OP, S)	do { (OP)->state = (S); } while(0)
+#else
+#define fscache_set_op_name(OP, N)	do { } while(0)
+#define fscache_set_op_state(OP, S)	do { } while(0)
+#endif
 };
 
 extern atomic_t fscache_op_debug_id;
@@ -125,6 +137,7 @@
 	op->debug_id = atomic_inc_return(&fscache_op_debug_id);
 	op->release = release;
 	INIT_LIST_HEAD(&op->pend_link);
+	fscache_set_op_state(op, "Init");
 }
 
 /**
@@ -221,8 +234,10 @@
 	struct fscache_object *(*alloc_object)(struct fscache_cache *cache,
 					       struct fscache_cookie *cookie);
 
-	/* look up the object for a cookie */
-	void (*lookup_object)(struct fscache_object *object);
+	/* look up the object for a cookie
+	 * - return -ETIMEDOUT to be requeued
+	 */
+	int (*lookup_object)(struct fscache_object *object);
 
 	/* finished looking up */
 	void (*lookup_complete)(struct fscache_object *object);
@@ -297,12 +312,14 @@
 	atomic_t			usage;		/* number of users of this cookie */
 	atomic_t			n_children;	/* number of children of this cookie */
 	spinlock_t			lock;
+	spinlock_t			stores_lock;	/* lock on page store tree */
 	struct hlist_head		backing_objects; /* object(s) backing this file/index */
 	const struct fscache_cookie_def	*def;		/* definition */
 	struct fscache_cookie		*parent;	/* parent of this entry */
 	void				*netfs_data;	/* back pointer to netfs */
 	struct radix_tree_root		stores;		/* pages to be stored on this cookie */
 #define FSCACHE_COOKIE_PENDING_TAG	0		/* pages tag: pending write to cache */
+#define FSCACHE_COOKIE_STORING_TAG	1		/* pages tag: writing to cache */
 
 	unsigned long			flags;
 #define FSCACHE_COOKIE_LOOKING_UP	0	/* T if non-index cookie being looked up still */
@@ -337,6 +354,7 @@
 		FSCACHE_OBJECT_RECYCLING,	/* retiring object */
 		FSCACHE_OBJECT_WITHDRAWING,	/* withdrawing object */
 		FSCACHE_OBJECT_DEAD,		/* object is now dead */
+		FSCACHE_OBJECT__NSTATES
 	} state;
 
 	int			debug_id;	/* debugging ID */
@@ -345,6 +363,7 @@
 	int			n_obj_ops;	/* number of object ops outstanding on object */
 	int			n_in_progress;	/* number of ops in progress */
 	int			n_exclusive;	/* number of exclusive ops queued */
+	atomic_t		n_reads;	/* number of read ops in progress */
 	spinlock_t		lock;		/* state and operations lock */
 
 	unsigned long		lookup_jif;	/* time at which lookup started */
@@ -358,6 +377,7 @@
 #define FSCACHE_OBJECT_EV_RELEASE	4	/* T if netfs requested object release */
 #define FSCACHE_OBJECT_EV_RETIRE	5	/* T if netfs requested object retirement */
 #define FSCACHE_OBJECT_EV_WITHDRAW	6	/* T if cache requested object withdrawal */
+#define FSCACHE_OBJECT_EVENTS_MASK	0x7f	/* mask of all events*/
 
 	unsigned long		flags;
 #define FSCACHE_OBJECT_LOCK		0	/* T if object is busy being processed */
@@ -373,7 +393,11 @@
 	struct list_head	dependents;	/* FIFO of dependent objects */
 	struct list_head	dep_link;	/* link in parent's dependents list */
 	struct list_head	pending_ops;	/* unstarted operations on this object */
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+	struct rb_node		objlist_link;	/* link in global object list */
+#endif
 	pgoff_t			store_limit;	/* current storage limit */
+	loff_t			store_limit_l;	/* current storage limit */
 };
 
 extern const char *fscache_object_states[];
@@ -383,6 +407,10 @@
 	 (obj)->state >= FSCACHE_OBJECT_AVAILABLE &&	      \
 	 (obj)->state < FSCACHE_OBJECT_DYING)
 
+#define fscache_object_is_dead(obj)				\
+	(test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) &&	\
+	 (obj)->state >= FSCACHE_OBJECT_DYING)
+
 extern const struct slow_work_ops fscache_object_slow_work_ops;
 
 /**
@@ -414,6 +442,7 @@
 	object->events = object->event_mask = 0;
 	object->flags = 0;
 	object->store_limit = 0;
+	object->store_limit_l = 0;
 	object->cache = cache;
 	object->cookie = cookie;
 	object->parent = NULL;
@@ -422,6 +451,12 @@
 extern void fscache_object_lookup_negative(struct fscache_object *object);
 extern void fscache_obtained_object(struct fscache_object *object);
 
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+extern void fscache_object_destroy(struct fscache_object *object);
+#else
+#define fscache_object_destroy(object) do {} while(0)
+#endif
+
 /**
  * fscache_object_destroyed - Note destruction of an object in a cache
  * @cache: The cache from which the object came
@@ -460,6 +495,7 @@
 static inline
 void fscache_set_store_limit(struct fscache_object *object, loff_t i_size)
 {
+	object->store_limit_l = i_size;
 	object->store_limit = i_size >> PAGE_SHIFT;
 	if (i_size & ~PAGE_MASK)
 		object->store_limit++;
diff --git a/include/linux/fscache.h b/include/linux/fscache.h
index 6d8ee46..595ce49 100644
--- a/include/linux/fscache.h
+++ b/include/linux/fscache.h
@@ -202,6 +202,8 @@
 extern void __fscache_uncache_page(struct fscache_cookie *, struct page *);
 extern bool __fscache_check_page_write(struct fscache_cookie *, struct page *);
 extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *);
+extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *,
+					 gfp_t);
 
 /**
  * fscache_register_netfs - Register a filesystem as desiring caching services
@@ -615,4 +617,29 @@
 		__fscache_wait_on_page_write(cookie, page);
 }
 
+/**
+ * fscache_maybe_release_page - Consider releasing a page, cancelling a store
+ * @cookie: The cookie representing the cache object
+ * @page: The netfs page that is being cached.
+ * @gfp: The gfp flags passed to releasepage()
+ *
+ * Consider releasing a page for the vmscan algorithm, on behalf of the netfs's
+ * releasepage() call.  A storage request on the page may cancelled if it is
+ * not currently being processed.
+ *
+ * The function returns true if the page no longer has a storage request on it,
+ * and false if a storage request is left in place.  If true is returned, the
+ * page will have been passed to fscache_uncache_page().  If false is returned
+ * the page cannot be freed yet.
+ */
+static inline
+bool fscache_maybe_release_page(struct fscache_cookie *cookie,
+				struct page *page,
+				gfp_t gfp)
+{
+	if (fscache_cookie_valid(cookie) && PageFsCache(page))
+		return __fscache_maybe_release_page(cookie, page, gfp);
+	return false;
+}
+
 #endif /* _LINUX_FSCACHE_H */
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 4ec5e67..47bbdf9 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -117,12 +117,12 @@
 	struct dentry		*dir;
 	struct trace_event	*event;
 	int			enabled;
-	int			(*regfunc)(void *);
-	void			(*unregfunc)(void *);
+	int			(*regfunc)(struct ftrace_event_call *);
+	void			(*unregfunc)(struct ftrace_event_call *);
 	int			id;
-	int			(*raw_init)(void);
-	int			(*show_format)(struct ftrace_event_call *call,
-					       struct trace_seq *s);
+	int			(*raw_init)(struct ftrace_event_call *);
+	int			(*show_format)(struct ftrace_event_call *,
+					       struct trace_seq *);
 	int			(*define_fields)(struct ftrace_event_call *);
 	struct list_head	fields;
 	int			filter_active;
@@ -131,20 +131,20 @@
 	void			*data;
 
 	atomic_t		profile_count;
-	int			(*profile_enable)(void);
-	void			(*profile_disable)(void);
+	int			(*profile_enable)(struct ftrace_event_call *);
+	void			(*profile_disable)(struct ftrace_event_call *);
 };
 
 #define FTRACE_MAX_PROFILE_SIZE	2048
 
-extern char			*trace_profile_buf;
-extern char			*trace_profile_buf_nmi;
+extern char *perf_trace_buf;
+extern char *perf_trace_buf_nmi;
 
 #define MAX_FILTER_PRED		32
 #define MAX_FILTER_STR_VAL	256	/* Should handle KSYM_SYMBOL_LEN */
 
 extern void destroy_preds(struct ftrace_event_call *call);
-extern int filter_match_preds(struct ftrace_event_call *call, void *rec);
+extern int filter_match_preds(struct event_filter *filter, void *rec);
 extern int filter_current_check_discard(struct ring_buffer *buffer,
 					struct ftrace_event_call *call,
 					void *rec,
@@ -157,11 +157,12 @@
 	FILTER_PTR_STRING,
 };
 
-extern int trace_define_field(struct ftrace_event_call *call,
-			      const char *type, const char *name,
-			      int offset, int size, int is_signed,
-			      int filter_type);
 extern int trace_define_common_fields(struct ftrace_event_call *call);
+extern int trace_define_field(struct ftrace_event_call *call, const char *type,
+			      const char *name, int offset, int size,
+			      int is_signed, int filter_type);
+extern int trace_add_event_call(struct ftrace_event_call *call);
+extern void trace_remove_event_call(struct ftrace_event_call *call);
 
 #define is_signed_type(type)	(((type)(-1)) < 0)
 
@@ -186,4 +187,13 @@
 		__trace_printk(ip, fmt, ##args);			\
 } while (0)
 
+#ifdef CONFIG_EVENT_PROFILE
+struct perf_event;
+extern int ftrace_profile_enable(int event_id);
+extern void ftrace_profile_disable(int event_id);
+extern int ftrace_profile_set_filter(struct perf_event *event, int event_id,
+				     char *filter_str);
+extern void ftrace_profile_free_filter(struct perf_event *event);
+#endif
+
 #endif /* _LINUX_FTRACE_EVENT_H */
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
index 710e901..552c8a0 100644
--- a/include/linux/gen_stats.h
+++ b/include/linux/gen_stats.h
@@ -18,13 +18,11 @@
  * @bytes: number of seen bytes
  * @packets: number of seen packets
  */
-struct gnet_stats_basic
-{
+struct gnet_stats_basic {
 	__u64	bytes;
 	__u32	packets;
 };
-struct gnet_stats_basic_packed
-{
+struct gnet_stats_basic_packed {
 	__u64	bytes;
 	__u32	packets;
 } __attribute__ ((packed));
@@ -34,8 +32,7 @@
  * @bps: current byte rate
  * @pps: current packet rate
  */
-struct gnet_stats_rate_est
-{
+struct gnet_stats_rate_est {
 	__u32	bps;
 	__u32	pps;
 };
@@ -48,8 +45,7 @@
  * @requeues: number of requeues
  * @overlimits: number of enqueues over the limit
  */
-struct gnet_stats_queue
-{
+struct gnet_stats_queue {
 	__u32	qlen;
 	__u32	backlog;
 	__u32	drops;
@@ -62,8 +58,7 @@
  * @interval: sampling period
  * @ewma_log: the log of measurement window weight
  */
-struct gnet_estimator
-{
+struct gnet_estimator {
 	signed char	interval;
 	unsigned char	ewma_log;
 };
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 297df45..c6c0c41 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -91,6 +91,7 @@
 	sector_t start_sect;
 	sector_t nr_sects;
 	sector_t alignment_offset;
+	unsigned int discard_alignment;
 	struct device __dev;
 	struct kobject *holder_dir;
 	int policy, partno;
diff --git a/include/linux/gfs2_ondisk.h b/include/linux/gfs2_ondisk.h
index b80c88d..81f90a5 100644
--- a/include/linux/gfs2_ondisk.h
+++ b/include/linux/gfs2_ondisk.h
@@ -81,7 +81,11 @@
 	__be32 mh_type;
 	__be64 __pad0;		/* Was generation number in gfs1 */
 	__be32 mh_format;
-	__be32 __pad1;		/* Was incarnation number in gfs1 */
+	/* This union is to keep userspace happy */
+	union {
+		__be32 mh_jid;		/* Was incarnation number in gfs1 */
+		__be32 __pad1;
+	};
 };
 
 /*
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 6d527ee..d5b3876 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -139,10 +139,34 @@
 #endif
 
 #if defined(CONFIG_NO_HZ)
+#if defined(CONFIG_TINY_RCU)
+extern void rcu_enter_nohz(void);
+extern void rcu_exit_nohz(void);
+
+static inline void rcu_irq_enter(void)
+{
+	rcu_exit_nohz();
+}
+
+static inline void rcu_irq_exit(void)
+{
+	rcu_enter_nohz();
+}
+
+static inline void rcu_nmi_enter(void)
+{
+}
+
+static inline void rcu_nmi_exit(void)
+{
+}
+
+#else
 extern void rcu_irq_enter(void);
 extern void rcu_irq_exit(void);
 extern void rcu_nmi_enter(void);
 extern void rcu_nmi_exit(void);
+#endif
 #else
 # define rcu_irq_enter() do { } while (0)
 # define rcu_irq_exit() do { } while (0)
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
new file mode 100644
index 0000000..a03daed
--- /dev/null
+++ b/include/linux/hw_breakpoint.h
@@ -0,0 +1,131 @@
+#ifndef _LINUX_HW_BREAKPOINT_H
+#define _LINUX_HW_BREAKPOINT_H
+
+enum {
+	HW_BREAKPOINT_LEN_1 = 1,
+	HW_BREAKPOINT_LEN_2 = 2,
+	HW_BREAKPOINT_LEN_4 = 4,
+	HW_BREAKPOINT_LEN_8 = 8,
+};
+
+enum {
+	HW_BREAKPOINT_R = 1,
+	HW_BREAKPOINT_W = 2,
+	HW_BREAKPOINT_X = 4,
+};
+
+#ifdef __KERNEL__
+
+#include <linux/perf_event.h>
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+/* As it's for in-kernel or ptrace use, we want it to be pinned */
+#define DEFINE_BREAKPOINT_ATTR(name)	\
+struct perf_event_attr name = {		\
+	.type = PERF_TYPE_BREAKPOINT,	\
+	.size = sizeof(name),		\
+	.pinned = 1,			\
+};
+
+static inline void hw_breakpoint_init(struct perf_event_attr *attr)
+{
+	attr->type = PERF_TYPE_BREAKPOINT;
+	attr->size = sizeof(*attr);
+	attr->pinned = 1;
+}
+
+static inline unsigned long hw_breakpoint_addr(struct perf_event *bp)
+{
+	return bp->attr.bp_addr;
+}
+
+static inline int hw_breakpoint_type(struct perf_event *bp)
+{
+	return bp->attr.bp_type;
+}
+
+static inline int hw_breakpoint_len(struct perf_event *bp)
+{
+	return bp->attr.bp_len;
+}
+
+extern struct perf_event *
+register_user_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_callback_t triggered,
+			    struct task_struct *tsk);
+
+/* FIXME: only change from the attr, and don't unregister */
+extern struct perf_event *
+modify_user_hw_breakpoint(struct perf_event *bp,
+			  struct perf_event_attr *attr,
+			  perf_callback_t triggered,
+			  struct task_struct *tsk);
+
+/*
+ * Kernel breakpoints are not associated with any particular thread.
+ */
+extern struct perf_event *
+register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
+				perf_callback_t triggered,
+				int cpu);
+
+extern struct perf_event **
+register_wide_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_callback_t triggered);
+
+extern int register_perf_hw_breakpoint(struct perf_event *bp);
+extern int __register_perf_hw_breakpoint(struct perf_event *bp);
+extern void unregister_hw_breakpoint(struct perf_event *bp);
+extern void unregister_wide_hw_breakpoint(struct perf_event **cpu_events);
+
+extern int reserve_bp_slot(struct perf_event *bp);
+extern void release_bp_slot(struct perf_event *bp);
+
+extern void flush_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
+{
+	return &bp->hw.info;
+}
+
+#else /* !CONFIG_HAVE_HW_BREAKPOINT */
+
+static inline struct perf_event *
+register_user_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_callback_t triggered,
+			    struct task_struct *tsk)	{ return NULL; }
+static inline struct perf_event *
+modify_user_hw_breakpoint(struct perf_event *bp,
+			  struct perf_event_attr *attr,
+			  perf_callback_t triggered,
+			  struct task_struct *tsk)	{ return NULL; }
+static inline struct perf_event *
+register_wide_hw_breakpoint_cpu(struct perf_event_attr *attr,
+				perf_callback_t triggered,
+				int cpu)		{ return NULL; }
+static inline struct perf_event **
+register_wide_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_callback_t triggered)	{ return NULL; }
+static inline int
+register_perf_hw_breakpoint(struct perf_event *bp)	{ return -ENOSYS; }
+static inline int
+__register_perf_hw_breakpoint(struct perf_event *bp) 	{ return -ENOSYS; }
+static inline void unregister_hw_breakpoint(struct perf_event *bp)	{ }
+static inline void
+unregister_wide_hw_breakpoint(struct perf_event **cpu_events)		{ }
+static inline int
+reserve_bp_slot(struct perf_event *bp)			{return -ENOSYS; }
+static inline void release_bp_slot(struct perf_event *bp) 		{ }
+
+static inline void flush_ptrace_hw_breakpoint(struct task_struct *tsk)	{ }
+
+static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
+{
+	return NULL;
+}
+
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_HW_BREAKPOINT_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 7b40cda..419ab54 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -110,7 +110,7 @@
  * @driver: Device driver model driver
  * @id_table: List of I2C devices supported by this driver
  * @detect: Callback for device detection
- * @address_data: The I2C addresses to probe, ignore or force (for detect)
+ * @address_data: The I2C addresses to probe (for detect)
  * @clients: List of detected clients we created (for i2c-core use only)
  *
  * The driver.owner field should be set to the module owner of this driver.
@@ -338,8 +338,7 @@
 	void *algo_data;
 
 	/* data fields that are valid for all devices	*/
-	u8 level; 			/* nesting level for lockdep */
-	struct mutex bus_lock;
+	struct rt_mutex bus_lock;
 
 	int timeout;			/* in jiffies */
 	int retries;
@@ -367,7 +366,7 @@
  */
 static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
 {
-	mutex_lock(&adapter->bus_lock);
+	rt_mutex_lock(&adapter->bus_lock);
 }
 
 /**
@@ -376,7 +375,7 @@
  */
 static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
 {
-	mutex_unlock(&adapter->bus_lock);
+	rt_mutex_unlock(&adapter->bus_lock);
 }
 
 /*flags for the client struct: */
@@ -398,9 +397,6 @@
  */
 struct i2c_client_address_data {
 	const unsigned short *normal_i2c;
-	const unsigned short *probe;
-	const unsigned short *ignore;
-	const unsigned short * const *forces;
 };
 
 /* Internal numbers to terminate lists */
@@ -614,134 +610,48 @@
   module_param_array(var, short, &var##_num, 0); \
   MODULE_PARM_DESC(var, desc)
 
-#define I2C_CLIENT_MODULE_PARM_FORCE(name)				\
-I2C_CLIENT_MODULE_PARM(force_##name,					\
-		       "List of adapter,address pairs which are "	\
-		       "unquestionably assumed to contain a `"		\
-		       # name "' chip")
-
-
 #define I2C_CLIENT_INSMOD_COMMON					\
-I2C_CLIENT_MODULE_PARM(probe, "List of adapter,address pairs to scan "	\
-		       "additionally");					\
-I2C_CLIENT_MODULE_PARM(ignore, "List of adapter,address pairs not to "	\
-		       "scan");						\
 static const struct i2c_client_address_data addr_data = {		\
 	.normal_i2c	= normal_i2c,					\
-	.probe		= probe,					\
-	.ignore		= ignore,					\
-	.forces		= forces,					\
 }
 
-#define I2C_CLIENT_FORCE_TEXT \
-	"List of adapter,address pairs to boldly assume to be present"
-
 /* These are the ones you want to use in your own drivers. Pick the one
    which matches the number of devices the driver differenciates between. */
 #define I2C_CLIENT_INSMOD						\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-static const unsigned short * const forces[] = { force, NULL };		\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_1(chip1)					\
 enum chips { any_chip, chip1 };						\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-static const unsigned short * const forces[] =	{ force,		\
-	force_##chip1, NULL };						\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_2(chip1, chip2)				\
 enum chips { any_chip, chip1, chip2 };					\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-static const unsigned short * const forces[] =	{ force,		\
-	force_##chip1, force_##chip2, NULL };				\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_3(chip1, chip2, chip3)			\
 enum chips { any_chip, chip1, chip2, chip3 };				\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip3);					\
-static const unsigned short * const forces[] =	{ force,		\
-	force_##chip1, force_##chip2, force_##chip3, NULL };		\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_4(chip1, chip2, chip3, chip4)			\
 enum chips { any_chip, chip1, chip2, chip3, chip4 };			\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip3);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip4);					\
-static const unsigned short * const forces[] =	{ force,		\
-	force_##chip1, force_##chip2, force_##chip3,			\
-	force_##chip4, NULL};						\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_5(chip1, chip2, chip3, chip4, chip5)		\
 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5 };		\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip3);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip4);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip5);					\
-static const unsigned short * const forces[] = { force,			\
-	force_##chip1, force_##chip2, force_##chip3,			\
-	force_##chip4, force_##chip5, NULL };				\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_6(chip1, chip2, chip3, chip4, chip5, chip6)	\
 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6 };	\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip3);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip4);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip5);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip6);					\
-static const unsigned short * const forces[] = { force,			\
-	force_##chip1, force_##chip2, force_##chip3,			\
-	force_##chip4, force_##chip5, force_##chip6, NULL };		\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_7(chip1, chip2, chip3, chip4, chip5, chip6, chip7) \
 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6,	\
 	     chip7 };							\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip3);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip4);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip5);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip6);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip7);					\
-static const unsigned short * const forces[] = { force,			\
-	force_##chip1, force_##chip2, force_##chip3,			\
-	force_##chip4, force_##chip5, force_##chip6,			\
-	force_##chip7, NULL };						\
 I2C_CLIENT_INSMOD_COMMON
 
 #define I2C_CLIENT_INSMOD_8(chip1, chip2, chip3, chip4, chip5, chip6, chip7, chip8) \
 enum chips { any_chip, chip1, chip2, chip3, chip4, chip5, chip6,	\
 	     chip7, chip8 };						\
-I2C_CLIENT_MODULE_PARM(force, I2C_CLIENT_FORCE_TEXT);			\
-I2C_CLIENT_MODULE_PARM_FORCE(chip1);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip2);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip3);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip4);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip5);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip6);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip7);					\
-I2C_CLIENT_MODULE_PARM_FORCE(chip8);					\
-static const unsigned short * const forces[] = { force,			\
-	force_##chip1, force_##chip2, force_##chip3,			\
-	force_##chip4, force_##chip5, force_##chip6,			\
-	force_##chip7, force_##chip8, NULL };				\
 I2C_CLIENT_INSMOD_COMMON
 #endif /* __KERNEL__ */
 #endif /* _LINUX_I2C_H */
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 508824ee..5306a75 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -401,6 +401,24 @@
 
 extern void twl4030_power_init(struct twl4030_power_data *triton2_scripts);
 
+struct twl4030_codec_audio_data {
+	unsigned int	audio_mclk;
+	unsigned int ramp_delay_value;
+	unsigned int hs_extmute:1;
+	void (*set_hs_extmute)(int mute);
+};
+
+struct twl4030_codec_vibra_data {
+	unsigned int	audio_mclk;
+	unsigned int	coexist;
+};
+
+struct twl4030_codec_data {
+	unsigned int	audio_mclk;
+	struct twl4030_codec_audio_data		*audio;
+	struct twl4030_codec_vibra_data		*vibra;
+};
+
 struct twl4030_platform_data {
 	unsigned				irq_base, irq_end;
 	struct twl4030_bci_platform_data	*bci;
@@ -409,6 +427,7 @@
 	struct twl4030_keypad_data		*keypad;
 	struct twl4030_usb_data			*usb;
 	struct twl4030_power_data		*power;
+	struct twl4030_codec_data		*codec;
 
 	/* LDO regulators */
 	struct regulator_init_data		*vdac;
diff --git a/drivers/net/wireless/i82593.h b/include/linux/i82593.h
similarity index 100%
rename from drivers/net/wireless/i82593.h
rename to include/linux/i82593.h
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 52e15e0..d9724a2 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -115,7 +115,6 @@
 #define IEEE80211_MAX_SSID_LEN		32
 
 #define IEEE80211_MAX_MESH_ID_LEN	32
-#define IEEE80211_MESH_CONFIG_LEN	24
 
 #define IEEE80211_QOS_CTL_LEN		2
 #define IEEE80211_QOS_CTL_TID_MASK	0x000F
@@ -472,7 +471,7 @@
 }
 
 /**
- * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC
+ * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
  * @fc: frame control bytes in little-endian byteorder
  */
 static inline int ieee80211_is_nullfunc(__le16 fc)
@@ -481,6 +480,16 @@
 	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
 }
 
+/**
+ * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_qos_nullfunc(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+}
+
 struct ieee80211s_hdr {
 	u8 flags;
 	u8 ttl;
@@ -544,6 +553,35 @@
 	u8 virtual_map[1];
 } __attribute__ ((packed));
 
+/**
+ * struct ieee80211_meshconf_ie
+ *
+ * This structure refers to "Mesh Configuration information element"
+ */
+struct ieee80211_meshconf_ie {
+	u8 meshconf_psel;
+	u8 meshconf_pmetric;
+	u8 meshconf_congest;
+	u8 meshconf_synch;
+	u8 meshconf_auth;
+	u8 meshconf_form;
+	u8 meshconf_cap;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_rann_ie
+ *
+ * This structure refers to "Root Announcement information element"
+ */
+struct ieee80211_rann_ie {
+	u8 rann_flags;
+	u8 rann_hopcount;
+	u8 rann_ttl;
+	u8 rann_addr[6];
+	u32 rann_seq;
+	u32 rann_metric;
+} __attribute__ ((packed));
+
 #define WLAN_SA_QUERY_TR_ID_LEN 2
 
 struct ieee80211_mgmt {
@@ -1060,6 +1098,7 @@
 	WLAN_EID_PREQ = 68,
 	WLAN_EID_PREP = 69,
 	WLAN_EID_PERR = 70,
+	WLAN_EID_RANN = 49,	/* compatible with FreeBSD */
 	/* 802.11h */
 	WLAN_EID_PWR_CONSTRAINT = 32,
 	WLAN_EID_PWR_CAPABILITY = 33,
@@ -1227,6 +1266,8 @@
 
 #define WLAN_MAX_KEY_LEN		32
 
+#define WLAN_PMKID_LEN			16
+
 /**
  * ieee80211_get_qos_ctl - get pointer to qos control bytes
  * @hdr: the frame
diff --git a/include/linux/if.h b/include/linux/if.h
index b9a6229..3a9f410 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -70,6 +70,7 @@
 #define IFF_XMIT_DST_RELEASE 0x400	/* dev_hard_start_xmit() is allowed to
 					 * release skb->dst
 					 */
+#define IFF_DONT_BRIDGE 0x800		/* disallow bridging this ether dev */
 
 #define IF_GET_IFACE	0x0001		/* for querying only */
 #define IF_GET_PROTO	0x0002
@@ -125,8 +126,7 @@
  *	being very small might be worth keeping for clean configuration.
  */
 
-struct ifmap 
-{
+struct ifmap {
 	unsigned long mem_start;
 	unsigned long mem_end;
 	unsigned short base_addr; 
@@ -136,8 +136,7 @@
 	/* 3 bytes spare */
 };
 
-struct if_settings
-{
+struct if_settings {
 	unsigned int type;	/* Type of physical device or protocol */
 	unsigned int size;	/* Size of the data allocated by the caller */
 	union {
@@ -161,8 +160,7 @@
  * remainder may be interface specific.
  */
 
-struct ifreq 
-{
+struct ifreq {
 #define IFHWADDRLEN	6
 	union
 	{
@@ -211,11 +209,9 @@
  * must know all networks accessible).
  */
 
-struct ifconf 
-{
+struct ifconf  {
 	int	ifc_len;			/* size of buffer	*/
-	union 
-	{
+	union {
 		char __user *ifcu_buf;
 		struct ifreq __user *ifcu_req;
 	} ifc_ifcu;
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
index fd97404..23357ab 100644
--- a/include/linux/if_addr.h
+++ b/include/linux/if_addr.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/netlink.h>
 
-struct ifaddrmsg
-{
+struct ifaddrmsg {
 	__u8		ifa_family;
 	__u8		ifa_prefixlen;	/* The prefix length		*/
 	__u8		ifa_flags;	/* Flags			*/
@@ -20,8 +19,7 @@
  * but for point-to-point IFA_ADDRESS is DESTINATION address,
  * local address is supplied in IFA_LOCAL attribute.
  */
-enum
-{
+enum {
 	IFA_UNSPEC,
 	IFA_ADDRESS,
 	IFA_LOCAL,
@@ -47,8 +45,7 @@
 #define IFA_F_TENTATIVE		0x40
 #define IFA_F_PERMANENT		0x80
 
-struct ifa_cacheinfo
-{
+struct ifa_cacheinfo {
 	__u32	ifa_prefered;
 	__u32	ifa_valid;
 	__u32	cstamp; /* created timestamp, hundredths of seconds */
diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h
index 89571f6..54580c2 100644
--- a/include/linux/if_addrlabel.h
+++ b/include/linux/if_addrlabel.h
@@ -12,8 +12,7 @@
 
 #include <linux/types.h>
 
-struct ifaddrlblmsg
-{
+struct ifaddrlblmsg {
 	__u8		ifal_family;		/* Address family */
 	__u8		__ifal_reserved;	/* Reserved */
 	__u8		ifal_prefixlen;		/* Prefix length */
@@ -22,8 +21,7 @@
 	__u32		ifal_seq;		/* sequence number */
 };
 
-enum
-{
+enum {
 	IFAL_ADDRESS = 1,
 	IFAL_LABEL = 2,
 	__IFAL_MAX
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
index 0835deb..46e34bd 100644
--- a/include/linux/if_arcnet.h
+++ b/include/linux/if_arcnet.h
@@ -56,8 +56,7 @@
 /*
  * The RFC1201-specific components of an arcnet packet header.
  */
-struct arc_rfc1201
-{
+struct arc_rfc1201 {
     __u8  proto;		/* protocol ID field - varies		*/
     __u8  split_flag;	/* for use with split packets		*/
     __be16   sequence;		/* sequence number			*/
@@ -69,8 +68,7 @@
 /*
  * The RFC1051-specific components.
  */
-struct arc_rfc1051
-{
+struct arc_rfc1051 {
     __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
     __u8 payload[0];		/* 507 bytes			*/
 };
@@ -81,8 +79,7 @@
  * The ethernet-encap-specific components.  We have a real ethernet header
  * and some data.
  */
-struct arc_eth_encap
-{
+struct arc_eth_encap {
     __u8 proto;		/* Always ARC_P_ETHER			*/
     struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
     __u8 payload[0];		/* 493 bytes				*/
@@ -90,8 +87,7 @@
 #define ETH_ENCAP_HDR_SIZE 14
 
 
-struct arc_cap
-{
+struct arc_cap {
 	__u8 proto;
 	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
 	union {
@@ -108,8 +104,7 @@
  * the _end_ of the 512-byte buffer.  We hide this complexity inside the
  * driver.
  */
-struct arc_hardware
-{
+struct arc_hardware {
     __u8  source,		/* source ARCnet - filled in automagically */
              dest,		/* destination ARCnet - 0 for broadcast    */
     	     offset[2];		/* offset bytes (some weird semantics)     */
@@ -120,8 +115,7 @@
  * This is an ARCnet frame header, as seen by the kernel (and userspace,
  * when you do a raw packet capture).
  */
-struct archdr
-{
+struct archdr {
     /* hardware requirements */
     struct arc_hardware hard;
      
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 282eb37..e80b7f8 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -133,8 +133,7 @@
  *	This structure defines an ethernet arp header.
  */
 
-struct arphdr
-{
+struct arphdr {
 	__be16		ar_hrd;		/* format of hardware address	*/
 	__be16		ar_pro;		/* format of protocol address	*/
 	unsigned char	ar_hln;		/* length of hardware address	*/
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
index 65c2d24..cd525fa 100644
--- a/include/linux/if_bonding.h
+++ b/include/linux/if_bonding.h
@@ -94,8 +94,7 @@
 	__s32 miimon;
 } ifbond;
 
-typedef struct ifslave
-{
+typedef struct ifslave {
 	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
 	char slave_name[IFNAMSIZ];
 	__s8 link;
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index 6badb3e..938b7e8 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -49,8 +49,7 @@
 #define BR_STATE_FORWARDING 3
 #define BR_STATE_BLOCKING 4
 
-struct __bridge_info
-{
+struct __bridge_info {
 	__u64 designated_root;
 	__u64 bridge_id;
 	__u32 root_path_cost;
@@ -72,8 +71,7 @@
 	__u32 gc_timer_value;
 };
 
-struct __port_info
-{
+struct __port_info {
 	__u64 designated_root;
 	__u64 designated_bridge;
 	__u16 port_id;
@@ -89,8 +87,7 @@
 	__u32 hold_timer_value;
 };
 
-struct __fdb_entry
-{
+struct __fdb_entry {
 	__u8 mac_addr[6];
 	__u8 port_no;
 	__u8 is_local;
diff --git a/include/linux/if_ec.h b/include/linux/if_ec.h
index e7499aa..d85f9f4 100644
--- a/include/linux/if_ec.h
+++ b/include/linux/if_ec.h
@@ -5,14 +5,12 @@
 
 /* User visible stuff. Glibc provides its own but libc5 folk will use these */
 
-struct ec_addr
-{
+struct ec_addr {
   unsigned char station;		/* Station number.  */
   unsigned char net;			/* Network number.  */
 };
 
-struct sockaddr_ec
-{
+struct sockaddr_ec {
   unsigned short sec_family;
   unsigned char port;			/* Port number.  */
   unsigned char cb;			/* Control/flag byte.  */
@@ -37,8 +35,7 @@
 #define EC_HLEN				6
 
 /* This is what an Econet frame looks like on the wire. */
-struct ec_framehdr 
-{
+struct ec_framehdr {
   unsigned char dst_stn;
   unsigned char dst_net;
   unsigned char src_stn;
@@ -62,8 +59,7 @@
 	return (struct econet_sock *)sk;
 }
 
-struct ec_device
-{
+struct ec_device {
   unsigned char station, net;		/* Econet protocol address */
 };
 
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index 580b600..005e152 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -136,10 +136,6 @@
 
 extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
 
-/*
- *	Display a 6 byte device address (MAC) in a readable format.
- */
-extern char *print_mac(char *buf, const unsigned char *addr) __deprecated;
 #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
 #define MAC_BUF_SIZE	18
 #define DECLARE_MAC_BUF(var) char var[MAC_BUF_SIZE]
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index 45de104..5459c5c 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -63,36 +63,32 @@
 #define FDDI_UI_CMD			0x03
 
 /* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr
-	{
+struct fddi_8022_1_hdr {
 	__u8	dsap;					/* destination service access point */
 	__u8	ssap;					/* source service access point */
 	__u8	ctrl;					/* control byte #1 */
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr
-	{
+struct fddi_8022_2_hdr {
 	__u8	dsap;					/* destination service access point */
 	__u8	ssap;					/* source service access point */
 	__u8	ctrl_1;					/* control byte #1 */
 	__u8	ctrl_2;					/* control byte #2 */
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* Define 802.2 SNAP header */
 #define FDDI_K_OUI_LEN	3
-struct fddi_snap_hdr
-	{
+struct fddi_snap_hdr {
 	__u8	dsap;					/* always 0xAA */
 	__u8	ssap;					/* always 0xAA */
 	__u8	ctrl;					/* always 0x03 */
 	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
 	__be16	ethertype;				/* packet type ID field */
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* Define FDDI LLC frame header */
-struct fddihdr
-	{
+struct fddihdr {
 	__u8	fc;						/* frame control */
 	__u8	daddr[FDDI_K_ALEN];		/* destination address */
 	__u8	saddr[FDDI_K_ALEN];		/* source address */
@@ -102,7 +98,7 @@
 		struct fddi_8022_2_hdr		llc_8022_2;
 		struct fddi_snap_hdr		llc_snap;
 		} hdr;
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 #ifdef __KERNEL__
 #include <linux/netdevice.h>
@@ -197,7 +193,7 @@
 	__u32	port_pc_withhold[2];
 	__u32	port_ler_flag[2];
 	__u32	port_hardware_present[2];
-	};
+};
 #endif /* __KERNEL__ */
 
 #endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
index 4a7c994..8d038eb 100644
--- a/include/linux/if_hippi.h
+++ b/include/linux/if_hippi.h
@@ -51,8 +51,7 @@
  *	HIPPI statistics collection data. 
  */
  
-struct hipnet_statistics
-{
+struct hipnet_statistics {
 	int	rx_packets;		/* total packets received	*/
 	int	tx_packets;		/* total packets transmitted	*/
 	int	rx_errors;		/* bad packets received		*/
@@ -77,8 +76,7 @@
 };
 
 
-struct hippi_fp_hdr
-{
+struct hippi_fp_hdr {
 #if 0
 	__u8		ulp;				/* must contain 4 */
 #if defined (__BIG_ENDIAN_BITFIELD)
@@ -108,8 +106,7 @@
 	__be32		d2_size;
 } __attribute__ ((packed));
 
-struct hippi_le_hdr
-{
+struct hippi_le_hdr {
 #if defined (__BIG_ENDIAN_BITFIELD)
 	__u8		fc:3;
 	__u8		double_wide:1;
@@ -139,8 +136,7 @@
  * Looks like the dsap and ssap fields have been swapped by mistake in
  * RFC 2067 "IP over HIPPI".
  */
-struct hippi_snap_hdr
-{
+struct hippi_snap_hdr {
 	__u8	dsap;			/* always 0xAA */
 	__u8	ssap;			/* always 0xAA */
 	__u8	ctrl;			/* always 0x03 */
@@ -148,8 +144,7 @@
 	__be16	ethertype;		/* packet type ID field */
 } __attribute__ ((packed));
 
-struct hippi_hdr
-{
+struct hippi_hdr {
 	struct hippi_fp_hdr	fp;
 	struct hippi_le_hdr	le;
 	struct hippi_snap_hdr	snap;
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 176c518..6674791 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -5,8 +5,7 @@
 #include <linux/netlink.h>
 
 /* The struct should be in sync with struct net_device_stats */
-struct rtnl_link_stats
-{
+struct rtnl_link_stats {
 	__u32	rx_packets;		/* total packets received	*/
 	__u32	tx_packets;		/* total packets transmitted	*/
 	__u32	rx_bytes;		/* total bytes received 	*/
@@ -39,8 +38,7 @@
 };
 
 /* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap
-{
+struct rtnl_link_ifmap {
 	__u64	mem_start;
 	__u64	mem_end;
 	__u64	base_addr;
@@ -49,8 +47,7 @@
 	__u8	port;
 };
 
-enum
-{
+enum {
 	IFLA_UNSPEC,
 	IFLA_ADDRESS,
 	IFLA_BROADCAST,
@@ -123,8 +120,7 @@
  */
 
 /* Subtype attributes for IFLA_PROTINFO */
-enum
-{
+enum {
 	IFLA_INET6_UNSPEC,
 	IFLA_INET6_FLAGS,	/* link flags			*/
 	IFLA_INET6_CONF,	/* sysctl parameters		*/
@@ -137,16 +133,14 @@
 
 #define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
 
-struct ifla_cacheinfo
-{
+struct ifla_cacheinfo {
 	__u32	max_reasm_len;
 	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
 	__u32	reachable_time;
 	__u32	retrans_time;
 };
 
-enum
-{
+enum {
 	IFLA_INFO_UNSPEC,
 	IFLA_INFO_KIND,
 	IFLA_INFO_DATA,
@@ -158,8 +152,7 @@
 
 /* VLAN section */
 
-enum
-{
+enum {
 	IFLA_VLAN_UNSPEC,
 	IFLA_VLAN_ID,
 	IFLA_VLAN_FLAGS,
@@ -175,8 +168,7 @@
 	__u32	mask;
 };
 
-enum
-{
+enum {
 	IFLA_VLAN_QOS_UNSPEC,
 	IFLA_VLAN_QOS_MAPPING,
 	__IFLA_VLAN_QOS_MAX
@@ -184,10 +176,24 @@
 
 #define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
 
-struct ifla_vlan_qos_mapping
-{
+struct ifla_vlan_qos_mapping {
 	__u32 from;
 	__u32 to;
 };
 
+/* MACVLAN section */
+enum {
+	IFLA_MACVLAN_UNSPEC,
+	IFLA_MACVLAN_MODE,
+	__IFLA_MACVLAN_MAX,
+};
+
+#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1)
+
+enum macvlan_mode {
+	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
+	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
+	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+};
+
 #endif /* _LINUX_IF_LINK_H */
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index dea7d6b..4021d47c 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -3,15 +3,13 @@
 
 #include <linux/types.h>
 
-struct sockaddr_pkt
-{
+struct sockaddr_pkt {
 	unsigned short spkt_family;
 	unsigned char spkt_device[14];
 	__be16 spkt_protocol;
 };
 
-struct sockaddr_ll
-{
+struct sockaddr_ll {
 	unsigned short	sll_family;
 	__be16		sll_protocol;
 	int		sll_ifindex;
@@ -49,14 +47,12 @@
 #define PACKET_TX_RING			13
 #define PACKET_LOSS			14
 
-struct tpacket_stats
-{
+struct tpacket_stats {
 	unsigned int	tp_packets;
 	unsigned int	tp_drops;
 };
 
-struct tpacket_auxdata
-{
+struct tpacket_auxdata {
 	__u32		tp_status;
 	__u32		tp_len;
 	__u32		tp_snaplen;
@@ -78,8 +74,7 @@
 #define TP_STATUS_SENDING	0x2
 #define TP_STATUS_WRONG_FORMAT	0x4
 
-struct tpacket_hdr
-{
+struct tpacket_hdr {
 	unsigned long	tp_status;
 	unsigned int	tp_len;
 	unsigned int	tp_snaplen;
@@ -93,8 +88,7 @@
 #define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
 #define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
 
-struct tpacket2_hdr
-{
+struct tpacket2_hdr {
 	__u32		tp_status;
 	__u32		tp_len;
 	__u32		tp_snaplen;
@@ -107,8 +101,7 @@
 
 #define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
 
-enum tpacket_versions
-{
+enum tpacket_versions {
 	TPACKET_V1,
 	TPACKET_V2,
 };
@@ -126,16 +119,14 @@
    - Pad to align to TPACKET_ALIGNMENT=16
  */
 
-struct tpacket_req
-{
+struct tpacket_req {
 	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
 	unsigned int	tp_block_nr;	/* Number of blocks */
 	unsigned int	tp_frame_size;	/* Size of frame */
 	unsigned int	tp_frame_nr;	/* Total number of frames */
 };
 
-struct packet_mreq
-{
+struct packet_mreq {
 	int		mr_ifindex;
 	unsigned short	mr_type;
 	unsigned short	mr_alen;
diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h
index 153a649..6298c7e 100644
--- a/include/linux/if_plip.h
+++ b/include/linux/if_plip.h
@@ -15,8 +15,7 @@
 
 #define	SIOCDEVPLIP	SIOCDEVPRIVATE
 
-struct plipconf
-{
+struct plipconf {
 	unsigned short pcmd;
 	unsigned long  nibble;
 	unsigned long  trigger;
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index 3a14b08..c58baea 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -24,8 +24,7 @@
 /* Structure used to connect() the socket to a particular tunnel UDP
  * socket.
  */
-struct pppol2tp_addr
-{
+struct pppol2tp_addr {
 	__kernel_pid_t	pid;		/* pid that owns the fd.
 					 * 0 => current */
 	int	fd;			/* FD of UDP socket to use */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 5a9aae4..1822d63 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -5,6 +5,7 @@
 
 #ifdef __KERNEL__
 #include <linux/ip.h>
+#include <linux/in6.h>
 #endif
 
 #define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
@@ -15,6 +16,10 @@
 #define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
 #define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
 #define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
 
 #define GRE_CSUM	__cpu_to_be16(0x8000)
 #define GRE_ROUTING	__cpu_to_be16(0x4000)
@@ -25,8 +30,7 @@
 #define GRE_FLAGS	__cpu_to_be16(0x00F8)
 #define GRE_VERSION	__cpu_to_be16(0x0007)
 
-struct ip_tunnel_parm
-{
+struct ip_tunnel_parm {
 	char			name[IFNAMSIZ];
 	int			link;
 	__be16			i_flags;
@@ -51,8 +55,14 @@
 /* PRL flags */
 #define	PRL_DEFAULT		0x0001
 
-enum
-{
+struct ip_tunnel_6rd {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	__u16			prefixlen;
+	__u16			relay_prefixlen;
+};
+
+enum {
 	IFLA_GRE_UNSPEC,
 	IFLA_GRE_LINK,
 	IFLA_GRE_IFLAGS,
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 7ff9af1..3d870fd 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -63,7 +63,11 @@
 	return (struct vlan_ethhdr *)skb_mac_header(skb);
 }
 
-#define VLAN_VID_MASK	0xfff
+#define VLAN_PRIO_MASK		0xe000 /* Priority Code Point */
+#define VLAN_PRIO_SHIFT		13
+#define VLAN_CFI_MASK		0x1000 /* Canonical Format Indicator */
+#define VLAN_TAG_PRESENT	VLAN_CFI_MASK
+#define VLAN_VID_MASK		0x0fff /* VLAN Identifier */
 
 /* found in socket.c */
 extern void vlan_ioctl_set(int (*hook)(struct net *, void __user *));
@@ -81,6 +85,7 @@
 					    * the vlan is attached to.
 					    */
 	unsigned int		nr_vlans;
+	int			killall;
 	struct hlist_node	hlist;	/* linked list */
 	struct net_device **vlan_devices_arrays[VLAN_GROUP_ARRAY_SPLIT_PARTS];
 	struct rcu_head		rcu;
@@ -105,8 +110,8 @@
 	array[vlan_id % VLAN_GROUP_ARRAY_PART_LEN] = dev;
 }
 
-#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci)
-#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci)
+#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci & VLAN_TAG_PRESENT)
+#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci & ~VLAN_TAG_PRESENT)
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 extern struct net_device *vlan_dev_real_dev(const struct net_device *dev);
@@ -115,10 +120,12 @@
 extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 			     u16 vlan_tci, int polling);
 extern int vlan_hwaccel_do_receive(struct sk_buff *skb);
-extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
-			    unsigned int vlan_tci, struct sk_buff *skb);
-extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-			  unsigned int vlan_tci);
+extern gro_result_t
+vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
+		 unsigned int vlan_tci, struct sk_buff *skb);
+extern gro_result_t
+vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
+	       unsigned int vlan_tci);
 
 #else
 static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
@@ -145,17 +152,18 @@
 	return 0;
 }
 
-static inline int vlan_gro_receive(struct napi_struct *napi,
-				   struct vlan_group *grp,
-				   unsigned int vlan_tci, struct sk_buff *skb)
+static inline gro_result_t
+vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
+		 unsigned int vlan_tci, struct sk_buff *skb)
 {
-	return NET_RX_DROP;
+	return GRO_DROP;
 }
 
-static inline int vlan_gro_frags(struct napi_struct *napi,
-				 struct vlan_group *grp, unsigned int vlan_tci)
+static inline gro_result_t
+vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
+	       unsigned int vlan_tci)
 {
-	return NET_RX_DROP;
+	return GRO_DROP;
 }
 #endif
 
@@ -231,7 +239,7 @@
 static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb,
 						     u16 vlan_tci)
 {
-	skb->vlan_tci = vlan_tci;
+	skb->vlan_tci = VLAN_TAG_PRESENT | vlan_tci;
 	return skb;
 }
 
@@ -284,7 +292,7 @@
 					 u16 *vlan_tci)
 {
 	if (vlan_tx_tag_present(skb)) {
-		*vlan_tci = skb->vlan_tci;
+		*vlan_tci = vlan_tx_tag_get(skb);
 		return 0;
 	} else {
 		*vlan_tci = 0;
@@ -331,6 +339,7 @@
 enum vlan_flags {
 	VLAN_FLAG_REORDER_HDR	= 0x1,
 	VLAN_FLAG_GVRP		= 0x2,
+	VLAN_FLAG_LOOSE_BINDING	= 0x4,
 };
 
 enum vlan_name_types {
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index fe158e0..724c27e 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -27,8 +27,7 @@
  *	Header in on cable format
  */
 
-struct igmphdr
-{
+struct igmphdr {
 	__u8 type;
 	__u8 code;		/* For newer IGMP */
 	__sum16 csum;
@@ -151,8 +150,7 @@
 extern int sysctl_igmp_max_memberships;
 extern int sysctl_igmp_max_msf;
 
-struct ip_sf_socklist
-{
+struct ip_sf_socklist {
 	unsigned int		sl_max;
 	unsigned int		sl_count;
 	__be32			sl_addr[0];
@@ -167,16 +165,14 @@
    this list never used in fast path code
  */
 
-struct ip_mc_socklist
-{
+struct ip_mc_socklist {
 	struct ip_mc_socklist	*next;
 	struct ip_mreqn		multi;
 	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
 	struct ip_sf_socklist	*sflist;
 };
 
-struct ip_sf_list
-{
+struct ip_sf_list {
 	struct ip_sf_list	*sf_next;
 	__be32			sf_inaddr;
 	unsigned long		sf_count[2];	/* include/exclude counts */
@@ -185,8 +181,7 @@
 	unsigned char		sf_crcount;	/* retrans. left to send */
 };
 
-struct ip_mc_list
-{
+struct ip_mc_list {
 	struct in_device	*interface;
 	__be32			multiaddr;
 	struct ip_sf_list	*sources;
diff --git a/include/linux/in.h b/include/linux/in.h
index cf196da..b615649 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -118,14 +118,12 @@
 
 /* Request struct for multicast socket ops */
 
-struct ip_mreq 
-{
+struct ip_mreq  {
 	struct in_addr imr_multiaddr;	/* IP multicast address of group */
 	struct in_addr imr_interface;	/* local IP address of interface */
 };
 
-struct ip_mreqn
-{
+struct ip_mreqn {
 	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
 	struct in_addr	imr_address;		/* local IP address of interface */
 	int		imr_ifindex;		/* Interface index */
@@ -149,21 +147,18 @@
 	(sizeof(struct ip_msfilter) - sizeof(__u32) \
 	+ (numsrc) * sizeof(__u32))
 
-struct group_req
-{
+struct group_req {
 	__u32				 gr_interface;	/* interface index */
 	struct __kernel_sockaddr_storage gr_group;	/* group address */
 };
 
-struct group_source_req
-{
+struct group_source_req {
 	__u32				 gsr_interface;	/* interface index */
 	struct __kernel_sockaddr_storage gsr_group;	/* group address */
 	struct __kernel_sockaddr_storage gsr_source;	/* source address */
 };
 
-struct group_filter
-{
+struct group_filter {
 	__u32				 gf_interface;	/* interface index */
 	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
 	__u32				 gf_fmode;	/* filter mode */
@@ -175,8 +170,7 @@
 	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
 	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
 
-struct in_pktinfo
-{
+struct in_pktinfo {
 	int		ipi_ifindex;
 	struct in_addr	ipi_spec_dst;
 	struct in_addr	ipi_addr;
diff --git a/include/linux/in6.h b/include/linux/in6.h
index 718bf21..dfa2916 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -27,10 +27,8 @@
  *	IPv6 address structure
  */
 
-struct in6_addr
-{
-	union 
-	{
+struct in6_addr {
+	union {
 		__u8		u6_addr8[16];
 		__be16		u6_addr16[8];
 		__be32		u6_addr32[4];
@@ -75,8 +73,7 @@
 
 #define ipv6mr_acaddr	ipv6mr_multiaddr
 
-struct in6_flowlabel_req
-{
+struct in6_flowlabel_req {
 	struct in6_addr	flr_dst;
 	__be32	flr_label;
 	__u8	flr_action;
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index ad27c7d..699e85c 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -10,15 +10,13 @@
 #include <linux/timer.h>
 #include <linux/sysctl.h>
 
-struct ipv4_devconf
-{
+struct ipv4_devconf {
 	void	*sysctl;
 	int	data[__NET_IPV4_CONF_MAX - 1];
 	DECLARE_BITMAP(state, __NET_IPV4_CONF_MAX - 1);
 };
 
-struct in_device
-{
+struct in_device {
 	struct net_device	*dev;
 	atomic_t		refcnt;
 	int			dead;
@@ -85,6 +83,7 @@
 #define IN_DEV_RPFILTER(in_dev)		IN_DEV_MAXCONF((in_dev), RP_FILTER)
 #define IN_DEV_SOURCE_ROUTE(in_dev)	IN_DEV_ANDCONF((in_dev), \
 						       ACCEPT_SOURCE_ROUTE)
+#define IN_DEV_ACCEPT_LOCAL(in_dev)	IN_DEV_ORCONF((in_dev), ACCEPT_LOCAL)
 #define IN_DEV_BOOTP_RELAY(in_dev)	IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)
 
 #define IN_DEV_LOG_MARTIANS(in_dev)	IN_DEV_ORCONF((in_dev), LOG_MARTIANS)
@@ -110,8 +109,7 @@
 #define IN_DEV_ARP_IGNORE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_IGNORE)
 #define IN_DEV_ARP_NOTIFY(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_NOTIFY)
 
-struct in_ifaddr
-{
+struct in_ifaddr {
 	struct in_ifaddr	*ifa_next;
 	struct in_device	*ifa_dev;
 	struct rcu_head		rcu_head;
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 21a6f5d..8d10aa7 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -83,16 +83,12 @@
 #define INIT_IDS
 #endif
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
 /*
  * Because of the reduced scope of CAP_SETPCAP when filesystem
  * capabilities are in effect, it is safe to allow CAP_SETPCAP to
  * be available in the default configuration.
  */
 # define CAP_INIT_BSET  CAP_FULL_SET
-#else
-# define CAP_INIT_BSET  CAP_INIT_EFF_SET
-#endif
 
 #ifdef CONFIG_TREE_PREEMPT_RCU
 #define INIT_TASK_RCU_PREEMPT(tsk)					\
diff --git a/include/linux/input.h b/include/linux/input.h
index c2b1a7d..84b501a 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -595,6 +595,8 @@
 #define KEY_NUMERIC_STAR	0x20a
 #define KEY_NUMERIC_POUND	0x20b
 
+#define KEY_CAMERA_FOCUS	0x210
+
 /* We avoid low common keys in module aliases so they don't get huge. */
 #define KEY_MIN_INTERESTING	KEY_MUTE
 #define KEY_MAX			0x2ff
@@ -677,6 +679,9 @@
 #define SW_LINEOUT_INSERT	0x06  /* set = inserted */
 #define SW_JACK_PHYSICAL_INSERT 0x07  /* set = mechanical switch set */
 #define SW_VIDEOOUT_INSERT	0x08  /* set = inserted */
+#define SW_CAMERA_LENS_COVER	0x09  /* set = lens covered */
+#define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
+#define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 7ca72b7..75f3f00 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -603,12 +603,6 @@
 }
 #endif
 
-#if defined(CONFIG_GENERIC_HARDIRQS) && defined(CONFIG_DEBUG_SHIRQ)
-extern void debug_poll_all_shared_irqs(void);
-#else
-static inline void debug_poll_all_shared_irqs(void) { }
-#endif
-
 struct seq_file;
 int show_interrupts(struct seq_file *p, void *v);
 
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 4da4a75..a632359 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -40,16 +40,11 @@
 	struct io_context *ioc;
 
 	unsigned long last_end_request;
-	sector_t last_request_pos;
 
 	unsigned long ttime_total;
 	unsigned long ttime_samples;
 	unsigned long ttime_mean;
 
-	unsigned int seek_samples;
-	u64 seek_total;
-	sector_t seek_mean;
-
 	struct list_head queue_list;
 	struct hlist_node cic_list;
 
@@ -73,6 +68,10 @@
 	unsigned short ioprio;
 	unsigned short ioprio_changed;
 
+#ifdef CONFIG_BLK_CGROUP
+	unsigned short cgroup_changed;
+#endif
+
 	/*
 	 * For request batching
 	 */
@@ -99,14 +98,15 @@
 	return NULL;
 }
 
+struct task_struct;
 #ifdef CONFIG_BLOCK
 int put_io_context(struct io_context *ioc);
-void exit_io_context(void);
+void exit_io_context(struct task_struct *task);
 struct io_context *get_io_context(gfp_t gfp_flags, int node);
 struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
 void copy_io_context(struct io_context **pdst, struct io_context **psrc);
 #else
-static inline void exit_io_context(void)
+static inline void exit_io_context(struct task_struct *task)
 {
 }
 
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
index 148265e..dfc1703 100644
--- a/include/linux/ip_vs.h
+++ b/include/linux/ip_vs.h
@@ -127,8 +127,7 @@
 /*
  *	IPVS statistics object (for user space)
  */
-struct ip_vs_stats_user
-{
+struct ip_vs_stats_user {
 	__u32                   conns;          /* connections scheduled */
 	__u32                   inpkts;         /* incoming packets */
 	__u32                   outpkts;        /* outgoing packets */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index c662efa..e0cc9a7 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -167,6 +167,7 @@
 #endif
 	__s32		disable_ipv6;
 	__s32		accept_dad;
+	__s32		force_tllao;
 	void		*sysctl;
 };
 
@@ -207,6 +208,7 @@
 	DEVCONF_MC_FORWARDING,
 	DEVCONF_DISABLE_IPV6,
 	DEVCONF_ACCEPT_DAD,
+	DEVCONF_FORCE_TLLAO,
 	DEVCONF_MAX
 };
 
@@ -503,7 +505,7 @@
 
 #define INET6_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif)\
 	(((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net)	&& \
-	 ((*((__portpair *)&(inet_sk(__sk)->dport))) == (__ports))  	&& \
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports)) && \
 	 ((__sk)->sk_family		== AF_INET6)		&& \
 	 ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr))	&& \
 	 ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr))	&& \
diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h
index b02a3f1..006bf45 100644
--- a/include/linux/irqflags.h
+++ b/include/linux/irqflags.h
@@ -124,6 +124,6 @@
 	typecheck(unsigned long, flags);	\
 	raw_irqs_disabled_flags(flags);		\
 })
-#endif		/* CONFIG_X86 */
+#endif /* CONFIG_TRACE_IRQFLAGS_SUPPORT */
 
 #endif
diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h
index 1a9cf78bf..6811f4b 100644
--- a/include/linux/jiffies.h
+++ b/include/linux/jiffies.h
@@ -307,6 +307,7 @@
 extern unsigned long clock_t_to_jiffies(unsigned long x);
 extern u64 jiffies_64_to_clock_t(u64 x);
 extern u64 nsec_to_clock_t(u64 x);
+extern unsigned long nsecs_to_jiffies(u64 n);
 
 #define TIMESTAMP_SIZE	30
 
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index f4e3184..3fa4c59 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -15,7 +15,6 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 #include <linux/typecheck.h>
-#include <linux/ratelimit.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
@@ -241,8 +240,8 @@
 asmlinkage int printk(const char * fmt, ...)
 	__attribute__ ((format (printf, 1, 2))) __cold;
 
-extern struct ratelimit_state printk_ratelimit_state;
-extern int printk_ratelimit(void);
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
 extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
 				   unsigned int interval_msec);
 
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index 348fa88..c059044 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -25,6 +25,7 @@
 	cputime64_t iowait;
 	cputime64_t steal;
 	cputime64_t guest;
+	cputime64_t guest_nice;
 };
 
 struct kernel_stat {
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index 3a46b7b..1b672f7 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -296,6 +296,8 @@
 int disable_kprobe(struct kprobe *kp);
 int enable_kprobe(struct kprobe *kp);
 
+void dump_kprobe(struct kprobe *kp);
+
 #else /* !CONFIG_KPROBES: */
 
 static inline int kprobes_built_in(void)
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index caf6173..a24de0b 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -14,12 +14,76 @@
 
 #define KVM_API_VERSION 12
 
-/* for KVM_TRACE_ENABLE, deprecated */
+/* *** Deprecated interfaces *** */
+
+#define KVM_TRC_SHIFT           16
+
+#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
+#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1))
+
+#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
+#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
+#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
+
+#define KVM_TRC_HEAD_SIZE       12
+#define KVM_TRC_CYCLE_SIZE      8
+#define KVM_TRC_EXTRA_MAX       7
+
+#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
+#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
+#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
+#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
+#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
+#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
+#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
+#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
+#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
+#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
+#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
+#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
+#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
+#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
+#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
+#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
+#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
+#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
+#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
+#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
+#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
+#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
+#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
+#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
+
 struct kvm_user_trace_setup {
-	__u32 buf_size; /* sub_buffer size of each per-cpu */
-	__u32 buf_nr; /* the number of sub_buffers of each per-cpu */
+	__u32 buf_size;
+	__u32 buf_nr;
 };
 
+#define __KVM_DEPRECATED_MAIN_W_0x06 \
+	_IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
+#define __KVM_DEPRECATED_MAIN_0x07 _IO(KVMIO, 0x07)
+#define __KVM_DEPRECATED_MAIN_0x08 _IO(KVMIO, 0x08)
+
+#define __KVM_DEPRECATED_VM_R_0x70 _IOR(KVMIO, 0x70, struct kvm_assigned_irq)
+
+struct kvm_breakpoint {
+	__u32 enabled;
+	__u32 padding;
+	__u64 address;
+};
+
+struct kvm_debug_guest {
+	__u32 enabled;
+	__u32 pad;
+	struct kvm_breakpoint breakpoints[4];
+	__u32 singlestep;
+};
+
+#define __KVM_DEPRECATED_VCPU_W_0x87 _IOW(KVMIO, 0x87, struct kvm_debug_guest)
+
+/* *** End of deprecated interfaces *** */
+
+
 /* for KVM_CREATE_MEMORY_REGION */
 struct kvm_memory_region {
 	__u32 slot;
@@ -99,6 +163,7 @@
 
 /* For KVM_EXIT_INTERNAL_ERROR */
 #define KVM_INTERNAL_ERROR_EMULATION 1
+#define KVM_INTERNAL_ERROR_SIMUL_EX 2
 
 /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */
 struct kvm_run {
@@ -116,6 +181,11 @@
 	__u64 cr8;
 	__u64 apic_base;
 
+#ifdef __KVM_S390
+	/* the processor status word for s390 */
+	__u64 psw_mask; /* psw upper half */
+	__u64 psw_addr; /* psw lower half */
+#endif
 	union {
 		/* KVM_EXIT_UNKNOWN */
 		struct {
@@ -167,8 +237,6 @@
 		/* KVM_EXIT_S390_SIEIC */
 		struct {
 			__u8 icptcode;
-			__u64 mask; /* psw upper half */
-			__u64 addr; /* psw lower half */
 			__u16 ipa;
 			__u32 ipb;
 		} s390_sieic;
@@ -187,6 +255,9 @@
 		} dcr;
 		struct {
 			__u32 suberror;
+			/* Available with KVM_CAP_INTERNAL_ERROR_DATA: */
+			__u32 ndata;
+			__u64 data[16];
 		} internal;
 		/* Fix the size of the union. */
 		char padding[256];
@@ -329,24 +400,6 @@
 	__u8  pad[36];
 };
 
-#define KVM_TRC_SHIFT           16
-/*
- * kvm trace categories
- */
-#define KVM_TRC_ENTRYEXIT       (1 << KVM_TRC_SHIFT)
-#define KVM_TRC_HANDLER         (1 << (KVM_TRC_SHIFT + 1)) /* only 12 bits */
-
-/*
- * kvm trace action
- */
-#define KVM_TRC_VMENTRY         (KVM_TRC_ENTRYEXIT + 0x01)
-#define KVM_TRC_VMEXIT          (KVM_TRC_ENTRYEXIT + 0x02)
-#define KVM_TRC_PAGE_FAULT      (KVM_TRC_HANDLER + 0x01)
-
-#define KVM_TRC_HEAD_SIZE       12
-#define KVM_TRC_CYCLE_SIZE      8
-#define KVM_TRC_EXTRA_MAX       7
-
 #define KVMIO 0xAE
 
 /*
@@ -367,12 +420,10 @@
  */
 #define KVM_GET_VCPU_MMAP_SIZE    _IO(KVMIO,   0x04) /* in bytes */
 #define KVM_GET_SUPPORTED_CPUID   _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
-/*
- * ioctls for kvm trace
- */
-#define KVM_TRACE_ENABLE          _IOW(KVMIO, 0x06, struct kvm_user_trace_setup)
-#define KVM_TRACE_PAUSE           _IO(KVMIO,  0x07)
-#define KVM_TRACE_DISABLE         _IO(KVMIO,  0x08)
+#define KVM_TRACE_ENABLE          __KVM_DEPRECATED_MAIN_W_0x06
+#define KVM_TRACE_PAUSE           __KVM_DEPRECATED_MAIN_0x07
+#define KVM_TRACE_DISABLE         __KVM_DEPRECATED_MAIN_0x08
+
 /*
  * Extension capability list.
  */
@@ -436,8 +487,15 @@
 #endif
 #define KVM_CAP_IOEVENTFD 36
 #define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
-/* KVM upstream has more features, but we synched this number.
-   Linux, please remove this comment on rebase. */
+#ifdef __KVM_HAVE_XEN_HVM
+#define KVM_CAP_XEN_HVM 38
+#endif
+#define KVM_CAP_ADJUST_CLOCK 39
+#define KVM_CAP_INTERNAL_ERROR_DATA 40
+#ifdef __KVM_HAVE_VCPU_EVENTS
+#define KVM_CAP_VCPU_EVENTS 41
+#endif
+#define KVM_CAP_S390_PSW 42
 #define KVM_CAP_PPC_SEGSTATE 43
 
 #ifdef KVM_CAP_IRQ_ROUTING
@@ -491,6 +549,18 @@
 };
 #endif
 
+#ifdef KVM_CAP_XEN_HVM
+struct kvm_xen_hvm_config {
+	__u32 flags;
+	__u32 msr;
+	__u64 blob_addr_32;
+	__u64 blob_addr_64;
+	__u8 blob_size_32;
+	__u8 blob_size_64;
+	__u8 pad2[30];
+};
+#endif
+
 #define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
 
 struct kvm_irqfd {
@@ -500,55 +570,66 @@
 	__u8  pad[20];
 };
 
+struct kvm_clock_data {
+	__u64 clock;
+	__u32 flags;
+	__u32 pad[9];
+};
+
 /*
  * ioctls for VM fds
  */
-#define KVM_SET_MEMORY_REGION     _IOW(KVMIO, 0x40, struct kvm_memory_region)
+#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
 /*
  * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
  * a vcpu fd.
  */
-#define KVM_CREATE_VCPU           _IO(KVMIO,  0x41)
-#define KVM_GET_DIRTY_LOG         _IOW(KVMIO, 0x42, struct kvm_dirty_log)
-#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO, 0x43, struct kvm_memory_alias)
-#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO, 0x44)
-#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO, 0x45)
-#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46,\
+#define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
+#define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
+#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
+#define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
+#define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
+#define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
 					struct kvm_userspace_memory_region)
-#define KVM_SET_TSS_ADDR          _IO(KVMIO, 0x47)
-#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO, 0x48, __u64)
+#define KVM_SET_TSS_ADDR          _IO(KVMIO,   0x47)
+#define KVM_SET_IDENTITY_MAP_ADDR _IOW(KVMIO,  0x48, __u64)
 /* Device model IOC */
-#define KVM_CREATE_IRQCHIP	  _IO(KVMIO,  0x60)
-#define KVM_IRQ_LINE		  _IOW(KVMIO, 0x61, struct kvm_irq_level)
-#define KVM_GET_IRQCHIP		  _IOWR(KVMIO, 0x62, struct kvm_irqchip)
-#define KVM_SET_IRQCHIP		  _IOR(KVMIO,  0x63, struct kvm_irqchip)
-#define KVM_CREATE_PIT		  _IO(KVMIO,  0x64)
-#define KVM_GET_PIT		  _IOWR(KVMIO, 0x65, struct kvm_pit_state)
-#define KVM_SET_PIT		  _IOR(KVMIO,  0x66, struct kvm_pit_state)
-#define KVM_IRQ_LINE_STATUS	  _IOWR(KVMIO, 0x67, struct kvm_irq_level)
+#define KVM_CREATE_IRQCHIP        _IO(KVMIO,   0x60)
+#define KVM_IRQ_LINE              _IOW(KVMIO,  0x61, struct kvm_irq_level)
+#define KVM_GET_IRQCHIP           _IOWR(KVMIO, 0x62, struct kvm_irqchip)
+#define KVM_SET_IRQCHIP           _IOR(KVMIO,  0x63, struct kvm_irqchip)
+#define KVM_CREATE_PIT            _IO(KVMIO,   0x64)
+#define KVM_GET_PIT               _IOWR(KVMIO, 0x65, struct kvm_pit_state)
+#define KVM_SET_PIT               _IOR(KVMIO,  0x66, struct kvm_pit_state)
+#define KVM_IRQ_LINE_STATUS       _IOWR(KVMIO, 0x67, struct kvm_irq_level)
 #define KVM_REGISTER_COALESCED_MMIO \
 			_IOW(KVMIO,  0x67, struct kvm_coalesced_mmio_zone)
 #define KVM_UNREGISTER_COALESCED_MMIO \
 			_IOW(KVMIO,  0x68, struct kvm_coalesced_mmio_zone)
-#define KVM_ASSIGN_PCI_DEVICE _IOR(KVMIO, 0x69, \
-				   struct kvm_assigned_pci_dev)
-#define KVM_SET_GSI_ROUTING       _IOW(KVMIO, 0x6a, struct kvm_irq_routing)
+#define KVM_ASSIGN_PCI_DEVICE     _IOR(KVMIO,  0x69, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_SET_GSI_ROUTING       _IOW(KVMIO,  0x6a, struct kvm_irq_routing)
 /* deprecated, replaced by KVM_ASSIGN_DEV_IRQ */
-#define KVM_ASSIGN_IRQ _IOR(KVMIO, 0x70, \
-			    struct kvm_assigned_irq)
-#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO, 0x70, struct kvm_assigned_irq)
-#define KVM_REINJECT_CONTROL      _IO(KVMIO, 0x71)
-#define KVM_DEASSIGN_PCI_DEVICE _IOW(KVMIO, 0x72, \
-				     struct kvm_assigned_pci_dev)
-#define KVM_ASSIGN_SET_MSIX_NR \
-			_IOW(KVMIO, 0x73, struct kvm_assigned_msix_nr)
-#define KVM_ASSIGN_SET_MSIX_ENTRY \
-			_IOW(KVMIO, 0x74, struct kvm_assigned_msix_entry)
-#define KVM_DEASSIGN_DEV_IRQ       _IOW(KVMIO, 0x75, struct kvm_assigned_irq)
-#define KVM_IRQFD                  _IOW(KVMIO, 0x76, struct kvm_irqfd)
-#define KVM_CREATE_PIT2		   _IOW(KVMIO, 0x77, struct kvm_pit_config)
-#define KVM_SET_BOOT_CPU_ID        _IO(KVMIO, 0x78)
-#define KVM_IOEVENTFD             _IOW(KVMIO, 0x79, struct kvm_ioeventfd)
+#define KVM_ASSIGN_IRQ            __KVM_DEPRECATED_VM_R_0x70
+#define KVM_ASSIGN_DEV_IRQ        _IOW(KVMIO,  0x70, struct kvm_assigned_irq)
+#define KVM_REINJECT_CONTROL      _IO(KVMIO,   0x71)
+#define KVM_DEASSIGN_PCI_DEVICE   _IOW(KVMIO,  0x72, \
+				       struct kvm_assigned_pci_dev)
+#define KVM_ASSIGN_SET_MSIX_NR    _IOW(KVMIO,  0x73, \
+				       struct kvm_assigned_msix_nr)
+#define KVM_ASSIGN_SET_MSIX_ENTRY _IOW(KVMIO,  0x74, \
+				       struct kvm_assigned_msix_entry)
+#define KVM_DEASSIGN_DEV_IRQ      _IOW(KVMIO,  0x75, struct kvm_assigned_irq)
+#define KVM_IRQFD                 _IOW(KVMIO,  0x76, struct kvm_irqfd)
+#define KVM_CREATE_PIT2		  _IOW(KVMIO,  0x77, struct kvm_pit_config)
+#define KVM_SET_BOOT_CPU_ID       _IO(KVMIO,   0x78)
+#define KVM_IOEVENTFD             _IOW(KVMIO,  0x79, struct kvm_ioeventfd)
+#define KVM_XEN_HVM_CONFIG        _IOW(KVMIO,  0x7a, struct kvm_xen_hvm_config)
+#define KVM_SET_CLOCK             _IOW(KVMIO,  0x7b, struct kvm_clock_data)
+#define KVM_GET_CLOCK             _IOR(KVMIO,  0x7c, struct kvm_clock_data)
+/* Available with KVM_CAP_PIT_STATE2 */
+#define KVM_GET_PIT2              _IOR(KVMIO,  0x9f, struct kvm_pit_state2)
+#define KVM_SET_PIT2              _IOW(KVMIO,  0xa0, struct kvm_pit_state2)
 
 /*
  * ioctls for vcpu fds
@@ -561,7 +642,7 @@
 #define KVM_TRANSLATE             _IOWR(KVMIO, 0x85, struct kvm_translation)
 #define KVM_INTERRUPT             _IOW(KVMIO,  0x86, struct kvm_interrupt)
 /* KVM_DEBUG_GUEST is no longer supported, use KVM_SET_GUEST_DEBUG instead */
-#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_DEBUG_GUEST
+#define KVM_DEBUG_GUEST           __KVM_DEPRECATED_VCPU_W_0x87
 #define KVM_GET_MSRS              _IOWR(KVMIO, 0x88, struct kvm_msrs)
 #define KVM_SET_MSRS              _IOW(KVMIO,  0x89, struct kvm_msrs)
 #define KVM_SET_CPUID             _IOW(KVMIO,  0x8a, struct kvm_cpuid)
@@ -573,7 +654,7 @@
 #define KVM_SET_CPUID2            _IOW(KVMIO,  0x90, struct kvm_cpuid2)
 #define KVM_GET_CPUID2            _IOWR(KVMIO, 0x91, struct kvm_cpuid2)
 /* Available with KVM_CAP_VAPIC */
-#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO,  0x92, struct kvm_tpr_access_ctl)
+#define KVM_TPR_ACCESS_REPORTING  _IOWR(KVMIO, 0x92, struct kvm_tpr_access_ctl)
 /* Available with KVM_CAP_VAPIC */
 #define KVM_SET_VAPIC_ADDR        _IOW(KVMIO,  0x93, struct kvm_vapic_addr)
 /* valid for virtual machine (for floating interrupt)_and_ vcpu */
@@ -585,66 +666,23 @@
 /* initial ipl psw for s390 */
 #define KVM_S390_SET_INITIAL_PSW  _IOW(KVMIO,  0x96, struct kvm_s390_psw)
 /* initial reset for s390 */
-#define KVM_S390_INITIAL_RESET    _IO(KVMIO,  0x97)
+#define KVM_S390_INITIAL_RESET    _IO(KVMIO,   0x97)
 #define KVM_GET_MP_STATE          _IOR(KVMIO,  0x98, struct kvm_mp_state)
 #define KVM_SET_MP_STATE          _IOW(KVMIO,  0x99, struct kvm_mp_state)
 /* Available with KVM_CAP_NMI */
-#define KVM_NMI                   _IO(KVMIO,  0x9a)
+#define KVM_NMI                   _IO(KVMIO,   0x9a)
 /* Available with KVM_CAP_SET_GUEST_DEBUG */
 #define KVM_SET_GUEST_DEBUG       _IOW(KVMIO,  0x9b, struct kvm_guest_debug)
 /* MCE for x86 */
 #define KVM_X86_SETUP_MCE         _IOW(KVMIO,  0x9c, __u64)
 #define KVM_X86_GET_MCE_CAP_SUPPORTED _IOR(KVMIO,  0x9d, __u64)
 #define KVM_X86_SET_MCE           _IOW(KVMIO,  0x9e, struct kvm_x86_mce)
-
-/*
- * Deprecated interfaces
- */
-struct kvm_breakpoint {
-	__u32 enabled;
-	__u32 padding;
-	__u64 address;
-};
-
-struct kvm_debug_guest {
-	__u32 enabled;
-	__u32 pad;
-	struct kvm_breakpoint breakpoints[4];
-	__u32 singlestep;
-};
-
-#define __KVM_DEPRECATED_DEBUG_GUEST _IOW(KVMIO,  0x87, struct kvm_debug_guest)
-
+/* IA64 stack access */
 #define KVM_IA64_VCPU_GET_STACK   _IOR(KVMIO,  0x9a, void *)
 #define KVM_IA64_VCPU_SET_STACK   _IOW(KVMIO,  0x9b, void *)
-
-#define KVM_GET_PIT2   _IOR(KVMIO,   0x9f, struct kvm_pit_state2)
-#define KVM_SET_PIT2   _IOW(KVMIO,   0xa0, struct kvm_pit_state2)
-
-#define KVM_TRC_INJ_VIRQ         (KVM_TRC_HANDLER + 0x02)
-#define KVM_TRC_REDELIVER_EVT    (KVM_TRC_HANDLER + 0x03)
-#define KVM_TRC_PEND_INTR        (KVM_TRC_HANDLER + 0x04)
-#define KVM_TRC_IO_READ          (KVM_TRC_HANDLER + 0x05)
-#define KVM_TRC_IO_WRITE         (KVM_TRC_HANDLER + 0x06)
-#define KVM_TRC_CR_READ          (KVM_TRC_HANDLER + 0x07)
-#define KVM_TRC_CR_WRITE         (KVM_TRC_HANDLER + 0x08)
-#define KVM_TRC_DR_READ          (KVM_TRC_HANDLER + 0x09)
-#define KVM_TRC_DR_WRITE         (KVM_TRC_HANDLER + 0x0A)
-#define KVM_TRC_MSR_READ         (KVM_TRC_HANDLER + 0x0B)
-#define KVM_TRC_MSR_WRITE        (KVM_TRC_HANDLER + 0x0C)
-#define KVM_TRC_CPUID            (KVM_TRC_HANDLER + 0x0D)
-#define KVM_TRC_INTR             (KVM_TRC_HANDLER + 0x0E)
-#define KVM_TRC_NMI              (KVM_TRC_HANDLER + 0x0F)
-#define KVM_TRC_VMMCALL          (KVM_TRC_HANDLER + 0x10)
-#define KVM_TRC_HLT              (KVM_TRC_HANDLER + 0x11)
-#define KVM_TRC_CLTS             (KVM_TRC_HANDLER + 0x12)
-#define KVM_TRC_LMSW             (KVM_TRC_HANDLER + 0x13)
-#define KVM_TRC_APIC_ACCESS      (KVM_TRC_HANDLER + 0x14)
-#define KVM_TRC_TDP_FAULT        (KVM_TRC_HANDLER + 0x15)
-#define KVM_TRC_GTLB_WRITE       (KVM_TRC_HANDLER + 0x16)
-#define KVM_TRC_STLB_WRITE       (KVM_TRC_HANDLER + 0x17)
-#define KVM_TRC_STLB_INVAL       (KVM_TRC_HANDLER + 0x18)
-#define KVM_TRC_PPC_INSTR        (KVM_TRC_HANDLER + 0x19)
+/* Available with KVM_CAP_VCPU_EVENTS */
+#define KVM_GET_VCPU_EVENTS       _IOR(KVMIO,  0x9f, struct kvm_vcpu_events)
+#define KVM_SET_VCPU_EVENTS       _IOW(KVMIO,  0xa0, struct kvm_vcpu_events)
 
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 
@@ -699,4 +737,4 @@
 	__u16 padding[3];
 };
 
-#endif
+#endif /* __LINUX_KVM_H */
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index b7bbb5d..bd5a616 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -120,7 +120,7 @@
 	u32 gsi;
 	u32 type;
 	int (*set)(struct kvm_kernel_irq_routing_entry *e,
-		    struct kvm *kvm, int level);
+		   struct kvm *kvm, int irq_source_id, int level);
 	union {
 		struct {
 			unsigned irqchip;
@@ -128,9 +128,28 @@
 		} irqchip;
 		struct msi_msg msi;
 	};
-	struct list_head link;
+	struct hlist_node link;
 };
 
+#ifdef __KVM_HAVE_IOAPIC
+
+struct kvm_irq_routing_table {
+	int chip[KVM_NR_IRQCHIPS][KVM_IOAPIC_NUM_PINS];
+	struct kvm_kernel_irq_routing_entry *rt_entries;
+	u32 nr_rt_entries;
+	/*
+	 * Array indexed by gsi. Each entry contains list of irq chips
+	 * the gsi is connected to.
+	 */
+	struct hlist_head map[0];
+};
+
+#else
+
+struct kvm_irq_routing_table {};
+
+#endif
+
 struct kvm {
 	spinlock_t mmu_lock;
 	spinlock_t requests_lock;
@@ -166,8 +185,9 @@
 
 	struct mutex irq_lock;
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
-	struct list_head irq_routing; /* of kvm_kernel_irq_routing_entry */
+	struct kvm_irq_routing_table *irq_routing;
 	struct hlist_head mask_notifier_list;
+	struct hlist_head irq_ack_notifier_list;
 #endif
 
 #ifdef KVM_ARCH_WANT_MMU_NOTIFIER
@@ -266,6 +286,7 @@
 void mark_page_dirty(struct kvm *kvm, gfn_t gfn);
 
 void kvm_vcpu_block(struct kvm_vcpu *vcpu);
+void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu);
 void kvm_resched(struct kvm_vcpu *vcpu);
 void kvm_load_guest_fpu(struct kvm_vcpu *vcpu);
 void kvm_put_guest_fpu(struct kvm_vcpu *vcpu);
@@ -325,7 +346,7 @@
 void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu);
 
 int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu);
-void kvm_arch_hardware_enable(void *garbage);
+int kvm_arch_hardware_enable(void *garbage);
 void kvm_arch_hardware_disable(void *garbage);
 int kvm_arch_hardware_setup(void);
 void kvm_arch_hardware_unsetup(void);
@@ -390,7 +411,12 @@
 				      struct kvm_irq_mask_notifier *kimn);
 void kvm_fire_mask_notifiers(struct kvm *kvm, int irq, bool mask);
 
-int kvm_set_irq(struct kvm *kvm, int irq_source_id, int irq, int level);
+#ifdef __KVM_HAVE_IOAPIC
+void kvm_get_intr_delivery_bitmask(struct kvm_ioapic *ioapic,
+				   union kvm_ioapic_redirect_entry *entry,
+				   unsigned long *deliver_bitmask);
+#endif
+int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level);
 void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin);
 void kvm_register_irq_ack_notifier(struct kvm *kvm,
 				   struct kvm_irq_ack_notifier *kian);
@@ -552,4 +578,21 @@
 	return vcpu->kvm->bsp_vcpu_id == vcpu->vcpu_id;
 }
 #endif
+
+#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
+
+long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
+				  unsigned long arg);
+
+#else
+
+static inline long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
+						unsigned long arg)
+{
+	return -ENOTTY;
+}
+
 #endif
+
+#endif
+
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 8769864..a5b3dc7 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -365,7 +365,7 @@
 	/* This should match the actual table size of
 	 * ata_eh_cmd_timeout_table in libata-eh.c.
 	 */
-	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5,
+	ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 6,
 
 	/* Horkage types. May be set by libata or controller on drives
 	   (some horkage may be drive/controller pair dependant */
@@ -595,6 +595,7 @@
 	unsigned int		horkage;	/* List of broken features */
 	unsigned long		flags;		/* ATA_DFLAG_xxx */
 	struct scsi_device	*sdev;		/* attached SCSI device */
+	void			*private_data;
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
 	union acpi_object	*gtf_cache;
diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h
new file mode 100644
index 0000000..3a2b2d9
--- /dev/null
+++ b/include/linux/lru_cache.h
@@ -0,0 +1,294 @@
+/*
+   lru_cache.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2003-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#ifndef LRU_CACHE_H
+#define LRU_CACHE_H
+
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/string.h> /* for memset */
+#include <linux/seq_file.h>
+
+/*
+This header file (and its .c file; kernel-doc of functions see there)
+  define a helper framework to easily keep track of index:label associations,
+  and changes to an "active set" of objects, as well as pending transactions,
+  to persistently record those changes.
+
+  We use an LRU policy if it is necessary to "cool down" a region currently in
+  the active set before we can "heat" a previously unused region.
+
+  Because of this later property, it is called "lru_cache".
+  As it actually Tracks Objects in an Active SeT, we could also call it
+  toast (incidentally that is what may happen to the data on the
+  backend storage uppon next resync, if we don't get it right).
+
+What for?
+
+We replicate IO (more or less synchronously) to local and remote disk.
+
+For crash recovery after replication node failure,
+  we need to resync all regions that have been target of in-flight WRITE IO
+  (in use, or "hot", regions), as we don't know wether or not those WRITEs have
+  made it to stable storage.
+
+  To avoid a "full resync", we need to persistently track these regions.
+
+  This is known as "write intent log", and can be implemented as on-disk
+  (coarse or fine grained) bitmap, or other meta data.
+
+  To avoid the overhead of frequent extra writes to this meta data area,
+  usually the condition is softened to regions that _may_ have been target of
+  in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent
+  bitmap, trading frequency of meta data transactions against amount of
+  (possibly unneccessary) resync traffic.
+
+  If we set a hard limit on the area that may be "hot" at any given time, we
+  limit the amount of resync traffic needed for crash recovery.
+
+For recovery after replication link failure,
+  we need to resync all blocks that have been changed on the other replica
+  in the mean time, or, if both replica have been changed independently [*],
+  all blocks that have been changed on either replica in the mean time.
+  [*] usually as a result of a cluster split-brain and insufficient protection.
+      but there are valid use cases to do this on purpose.
+
+  Tracking those blocks can be implemented as "dirty bitmap".
+  Having it fine-grained reduces the amount of resync traffic.
+  It should also be persistent, to allow for reboots (or crashes)
+  while the replication link is down.
+
+There are various possible implementations for persistently storing
+write intent log information, three of which are mentioned here.
+
+"Chunk dirtying"
+  The on-disk "dirty bitmap" may be re-used as "write-intent" bitmap as well.
+  To reduce the frequency of bitmap updates for write-intent log purposes,
+  one could dirty "chunks" (of some size) at a time of the (fine grained)
+  on-disk bitmap, while keeping the in-memory "dirty" bitmap as clean as
+  possible, flushing it to disk again when a previously "hot" (and on-disk
+  dirtied as full chunk) area "cools down" again (no IO in flight anymore,
+  and none expected in the near future either).
+
+"Explicit (coarse) write intent bitmap"
+  An other implementation could chose a (probably coarse) explicit bitmap,
+  for write-intent log purposes, additionally to the fine grained dirty bitmap.
+
+"Activity log"
+  Yet an other implementation may keep track of the hot regions, by starting
+  with an empty set, and writing down a journal of region numbers that have
+  become "hot", or have "cooled down" again.
+
+  To be able to use a ring buffer for this journal of changes to the active
+  set, we not only record the actual changes to that set, but also record the
+  not changing members of the set in a round robin fashion. To do so, we use a
+  fixed (but configurable) number of slots which we can identify by index, and
+  associate region numbers (labels) with these indices.
+  For each transaction recording a change to the active set, we record the
+  change itself (index: -old_label, +new_label), and which index is associated
+  with which label (index: current_label) within a certain sliding window that
+  is moved further over the available indices with each such transaction.
+
+  Thus, for crash recovery, if the ringbuffer is sufficiently large, we can
+  accurately reconstruct the active set.
+
+  Sufficiently large depends only on maximum number of active objects, and the
+  size of the sliding window recording "index: current_label" associations within
+  each transaction.
+
+  This is what we call the "activity log".
+
+  Currently we need one activity log transaction per single label change, which
+  does not give much benefit over the "dirty chunks of bitmap" approach, other
+  than potentially less seeks.
+
+  We plan to change the transaction format to support multiple changes per
+  transaction, which then would reduce several (disjoint, "random") updates to
+  the bitmap into one transaction to the activity log ring buffer.
+*/
+
+/* this defines an element in a tracked set
+ * .colision is for hash table lookup.
+ * When we process a new IO request, we know its sector, thus can deduce the
+ * region number (label) easily.  To do the label -> object lookup without a
+ * full list walk, we use a simple hash table.
+ *
+ * .list is on one of three lists:
+ *  in_use: currently in use (refcnt > 0, lc_number != LC_FREE)
+ *     lru: unused but ready to be reused or recycled
+ *          (ts_refcnt == 0, lc_number != LC_FREE),
+ *    free: unused but ready to be recycled
+ *          (ts_refcnt == 0, lc_number == LC_FREE),
+ *
+ * an element is said to be "in the active set",
+ * if either on "in_use" or "lru", i.e. lc_number != LC_FREE.
+ *
+ * DRBD currently (May 2009) only uses 61 elements on the resync lru_cache
+ * (total memory usage 2 pages), and up to 3833 elements on the act_log
+ * lru_cache, totalling ~215 kB for 64bit architechture, ~53 pages.
+ *
+ * We usually do not actually free these objects again, but only "recycle"
+ * them, as the change "index: -old_label, +LC_FREE" would need a transaction
+ * as well.  Which also means that using a kmem_cache to allocate the objects
+ * from wastes some resources.
+ * But it avoids high order page allocations in kmalloc.
+ */
+struct lc_element {
+	struct hlist_node colision;
+	struct list_head list;		 /* LRU list or free list */
+	unsigned refcnt;
+	/* back "pointer" into ts_cache->element[index],
+	 * for paranoia, and for "ts_element_to_index" */
+	unsigned lc_index;
+	/* if we want to track a larger set of objects,
+	 * it needs to become arch independend u64 */
+	unsigned lc_number;
+
+	/* special label when on free list */
+#define LC_FREE (~0U)
+};
+
+struct lru_cache {
+	/* the least recently used item is kept at lru->prev */
+	struct list_head lru;
+	struct list_head free;
+	struct list_head in_use;
+
+	/* the pre-created kmem cache to allocate the objects from */
+	struct kmem_cache *lc_cache;
+
+	/* size of tracked objects, used to memset(,0,) them in lc_reset */
+	size_t element_size;
+	/* offset of struct lc_element member in the tracked object */
+	size_t element_off;
+
+	/* number of elements (indices) */
+	unsigned int  nr_elements;
+	/* Arbitrary limit on maximum tracked objects. Practical limit is much
+	 * lower due to allocation failures, probably. For typical use cases,
+	 * nr_elements should be a few thousand at most.
+	 * This also limits the maximum value of ts_element.ts_index, allowing the
+	 * 8 high bits of .ts_index to be overloaded with flags in the future. */
+#define LC_MAX_ACTIVE	(1<<24)
+
+	/* statistics */
+	unsigned used; /* number of lelements currently on in_use list */
+	unsigned long hits, misses, starving, dirty, changed;
+
+	/* see below: flag-bits for lru_cache */
+	unsigned long flags;
+
+	/* when changing the label of an index element */
+	unsigned int  new_number;
+
+	/* for paranoia when changing the label of an index element */
+	struct lc_element *changing_element;
+
+	void  *lc_private;
+	const char *name;
+
+	/* nr_elements there */
+	struct hlist_head *lc_slot;
+	struct lc_element **lc_element;
+};
+
+
+/* flag-bits for lru_cache */
+enum {
+	/* debugging aid, to catch concurrent access early.
+	 * user needs to guarantee exclusive access by proper locking! */
+	__LC_PARANOIA,
+	/* if we need to change the set, but currently there is a changing
+	 * transaction pending, we are "dirty", and must deferr further
+	 * changing requests */
+	__LC_DIRTY,
+	/* if we need to change the set, but currently there is no free nor
+	 * unused element available, we are "starving", and must not give out
+	 * further references, to guarantee that eventually some refcnt will
+	 * drop to zero and we will be able to make progress again, changing
+	 * the set, writing the transaction.
+	 * if the statistics say we are frequently starving,
+	 * nr_elements is too small. */
+	__LC_STARVING,
+};
+#define LC_PARANOIA (1<<__LC_PARANOIA)
+#define LC_DIRTY    (1<<__LC_DIRTY)
+#define LC_STARVING (1<<__LC_STARVING)
+
+extern struct lru_cache *lc_create(const char *name, struct kmem_cache *cache,
+		unsigned e_count, size_t e_size, size_t e_off);
+extern void lc_reset(struct lru_cache *lc);
+extern void lc_destroy(struct lru_cache *lc);
+extern void lc_set(struct lru_cache *lc, unsigned int enr, int index);
+extern void lc_del(struct lru_cache *lc, struct lc_element *element);
+
+extern struct lc_element *lc_try_get(struct lru_cache *lc, unsigned int enr);
+extern struct lc_element *lc_find(struct lru_cache *lc, unsigned int enr);
+extern struct lc_element *lc_get(struct lru_cache *lc, unsigned int enr);
+extern unsigned int lc_put(struct lru_cache *lc, struct lc_element *e);
+extern void lc_changed(struct lru_cache *lc, struct lc_element *e);
+
+struct seq_file;
+extern size_t lc_seq_printf_stats(struct seq_file *seq, struct lru_cache *lc);
+
+extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char *utext,
+				void (*detail) (struct seq_file *, struct lc_element *));
+
+/**
+ * lc_try_lock - can be used to stop lc_get() from changing the tracked set
+ * @lc: the lru cache to operate on
+ *
+ * Note that the reference counts and order on the active and lru lists may
+ * still change.  Returns true if we aquired the lock.
+ */
+static inline int lc_try_lock(struct lru_cache *lc)
+{
+	return !test_and_set_bit(__LC_DIRTY, &lc->flags);
+}
+
+/**
+ * lc_unlock - unlock @lc, allow lc_get() to change the set again
+ * @lc: the lru cache to operate on
+ */
+static inline void lc_unlock(struct lru_cache *lc)
+{
+	clear_bit(__LC_DIRTY, &lc->flags);
+	smp_mb__after_clear_bit();
+}
+
+static inline int lc_is_used(struct lru_cache *lc, unsigned int enr)
+{
+	struct lc_element *e = lc_find(lc, enr);
+	return e && e->refcnt;
+}
+
+#define lc_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+extern struct lc_element *lc_element_by_index(struct lru_cache *lc, unsigned i);
+extern unsigned int lc_index_of(struct lru_cache *lc, struct lc_element *e);
+
+#endif
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index 190c378..f78f83d 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -26,14 +26,15 @@
 
 /* Auxiliary data to use in generating the audit record. */
 struct common_audit_data {
-	char    type;
-#define LSM_AUDIT_DATA_FS      1
-#define LSM_AUDIT_DATA_NET     2
-#define LSM_AUDIT_DATA_CAP     3
-#define LSM_AUDIT_DATA_IPC     4
-#define LSM_AUDIT_DATA_TASK    5
-#define LSM_AUDIT_DATA_KEY     6
-#define LSM_AUDIT_NO_AUDIT     7
+	char type;
+#define LSM_AUDIT_DATA_FS	1
+#define LSM_AUDIT_DATA_NET	2
+#define LSM_AUDIT_DATA_CAP	3
+#define LSM_AUDIT_DATA_IPC	4
+#define LSM_AUDIT_DATA_TASK	5
+#define LSM_AUDIT_DATA_KEY	6
+#define LSM_AUDIT_NO_AUDIT	7
+#define LSM_AUDIT_DATA_KMOD	8
 	struct task_struct *tsk;
 	union 	{
 		struct {
@@ -66,6 +67,7 @@
 			char *key_desc;
 		} key_struct;
 #endif
+		char *kmod_name;
 	} u;
 	/* this union contains LSM specific data */
 	union {
diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h
index c63b65c..0aa3a1a 100644
--- a/include/linux/mfd/da903x.h
+++ b/include/linux/mfd/da903x.h
@@ -96,6 +96,10 @@
 	int	y_inverted;
 };
 
+struct da9034_backlight_pdata {
+	int	output_current;	/* output current of WLED, from 0-31 (in mA) */
+};
+
 /* DA9030 battery charger data */
 struct power_supply_info;
 
diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
new file mode 100644
index 0000000..ee496708
--- /dev/null
+++ b/include/linux/mfd/mcp.h
@@ -0,0 +1,69 @@
+/*
+ *  linux/drivers/mfd/mcp.h
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef MCP_H
+#define MCP_H
+
+#include <mach/dma.h>
+
+struct mcp_ops;
+
+struct mcp {
+	struct module	*owner;
+	struct mcp_ops	*ops;
+	spinlock_t	lock;
+	int		use_count;
+	unsigned int	sclk_rate;
+	unsigned int	rw_timeout;
+	dma_device_t	dma_audio_rd;
+	dma_device_t	dma_audio_wr;
+	dma_device_t	dma_telco_rd;
+	dma_device_t	dma_telco_wr;
+	struct device	attached_device;
+	int		gpio_base;
+};
+
+struct mcp_ops {
+	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
+	void		(*set_audio_divisor)(struct mcp *, unsigned int);
+	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
+	unsigned int	(*reg_read)(struct mcp *, unsigned int);
+	void		(*enable)(struct mcp *);
+	void		(*disable)(struct mcp *);
+};
+
+void mcp_set_telecom_divisor(struct mcp *, unsigned int);
+void mcp_set_audio_divisor(struct mcp *, unsigned int);
+void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
+unsigned int mcp_reg_read(struct mcp *, unsigned int);
+void mcp_enable(struct mcp *);
+void mcp_disable(struct mcp *);
+#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
+
+struct mcp *mcp_host_alloc(struct device *, size_t);
+int mcp_host_register(struct mcp *);
+void mcp_host_unregister(struct mcp *);
+
+struct mcp_driver {
+	struct device_driver drv;
+	int (*probe)(struct mcp *);
+	void (*remove)(struct mcp *);
+	int (*suspend)(struct mcp *, pm_message_t);
+	int (*resume)(struct mcp *);
+};
+
+int mcp_driver_register(struct mcp_driver *);
+void mcp_driver_unregister(struct mcp_driver *);
+
+#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
+#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
+
+#define mcp_priv(mcp)		((void *)((mcp)+1))
+
+#endif
diff --git a/include/linux/mfd/twl4030-codec.h b/include/linux/mfd/twl4030-codec.h
new file mode 100644
index 0000000..2ec317c
--- /dev/null
+++ b/include/linux/mfd/twl4030-codec.h
@@ -0,0 +1,272 @@
+/*
+ * MFD driver for twl4030 codec submodule
+ *
+ * Author:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __TWL4030_CODEC_H__
+#define __TWL4030_CODEC_H__
+
+/* Codec registers */
+#define TWL4030_REG_CODEC_MODE		0x01
+#define TWL4030_REG_OPTION		0x02
+#define TWL4030_REG_UNKNOWN		0x03
+#define TWL4030_REG_MICBIAS_CTL		0x04
+#define TWL4030_REG_ANAMICL		0x05
+#define TWL4030_REG_ANAMICR		0x06
+#define TWL4030_REG_AVADC_CTL		0x07
+#define TWL4030_REG_ADCMICSEL		0x08
+#define TWL4030_REG_DIGMIXING		0x09
+#define TWL4030_REG_ATXL1PGA		0x0A
+#define TWL4030_REG_ATXR1PGA		0x0B
+#define TWL4030_REG_AVTXL2PGA		0x0C
+#define TWL4030_REG_AVTXR2PGA		0x0D
+#define TWL4030_REG_AUDIO_IF		0x0E
+#define TWL4030_REG_VOICE_IF		0x0F
+#define TWL4030_REG_ARXR1PGA		0x10
+#define TWL4030_REG_ARXL1PGA		0x11
+#define TWL4030_REG_ARXR2PGA		0x12
+#define TWL4030_REG_ARXL2PGA		0x13
+#define TWL4030_REG_VRXPGA		0x14
+#define TWL4030_REG_VSTPGA		0x15
+#define TWL4030_REG_VRX2ARXPGA		0x16
+#define TWL4030_REG_AVDAC_CTL		0x17
+#define TWL4030_REG_ARX2VTXPGA		0x18
+#define TWL4030_REG_ARXL1_APGA_CTL	0x19
+#define TWL4030_REG_ARXR1_APGA_CTL	0x1A
+#define TWL4030_REG_ARXL2_APGA_CTL	0x1B
+#define TWL4030_REG_ARXR2_APGA_CTL	0x1C
+#define TWL4030_REG_ATX2ARXPGA		0x1D
+#define TWL4030_REG_BT_IF		0x1E
+#define TWL4030_REG_BTPGA		0x1F
+#define TWL4030_REG_BTSTPGA		0x20
+#define TWL4030_REG_EAR_CTL		0x21
+#define TWL4030_REG_HS_SEL		0x22
+#define TWL4030_REG_HS_GAIN_SET		0x23
+#define TWL4030_REG_HS_POPN_SET		0x24
+#define TWL4030_REG_PREDL_CTL		0x25
+#define TWL4030_REG_PREDR_CTL		0x26
+#define TWL4030_REG_PRECKL_CTL		0x27
+#define TWL4030_REG_PRECKR_CTL		0x28
+#define TWL4030_REG_HFL_CTL		0x29
+#define TWL4030_REG_HFR_CTL		0x2A
+#define TWL4030_REG_ALC_CTL		0x2B
+#define TWL4030_REG_ALC_SET1		0x2C
+#define TWL4030_REG_ALC_SET2		0x2D
+#define TWL4030_REG_BOOST_CTL		0x2E
+#define TWL4030_REG_SOFTVOL_CTL		0x2F
+#define TWL4030_REG_DTMF_FREQSEL	0x30
+#define TWL4030_REG_DTMF_TONEXT1H	0x31
+#define TWL4030_REG_DTMF_TONEXT1L	0x32
+#define TWL4030_REG_DTMF_TONEXT2H	0x33
+#define TWL4030_REG_DTMF_TONEXT2L	0x34
+#define TWL4030_REG_DTMF_TONOFF		0x35
+#define TWL4030_REG_DTMF_WANONOFF	0x36
+#define TWL4030_REG_I2S_RX_SCRAMBLE_H	0x37
+#define TWL4030_REG_I2S_RX_SCRAMBLE_M	0x38
+#define TWL4030_REG_I2S_RX_SCRAMBLE_L	0x39
+#define TWL4030_REG_APLL_CTL		0x3A
+#define TWL4030_REG_DTMF_CTL		0x3B
+#define TWL4030_REG_DTMF_PGA_CTL2	0x3C
+#define TWL4030_REG_DTMF_PGA_CTL1	0x3D
+#define TWL4030_REG_MISC_SET_1		0x3E
+#define TWL4030_REG_PCMBTMUX		0x3F
+#define TWL4030_REG_RX_PATH_SEL		0x43
+#define TWL4030_REG_VDL_APGA_CTL	0x44
+#define TWL4030_REG_VIBRA_CTL		0x45
+#define TWL4030_REG_VIBRA_SET		0x46
+#define TWL4030_REG_VIBRA_PWM_SET	0x47
+#define TWL4030_REG_ANAMIC_GAIN		0x48
+#define TWL4030_REG_MISC_SET_2		0x49
+
+/* Bitfield Definitions */
+
+/* TWL4030_CODEC_MODE (0x01) Fields */
+#define TWL4030_APLL_RATE		0xF0
+#define TWL4030_APLL_RATE_8000		0x00
+#define TWL4030_APLL_RATE_11025		0x10
+#define TWL4030_APLL_RATE_12000		0x20
+#define TWL4030_APLL_RATE_16000		0x40
+#define TWL4030_APLL_RATE_22050		0x50
+#define TWL4030_APLL_RATE_24000		0x60
+#define TWL4030_APLL_RATE_32000		0x80
+#define TWL4030_APLL_RATE_44100		0x90
+#define TWL4030_APLL_RATE_48000		0xA0
+#define TWL4030_APLL_RATE_96000		0xE0
+#define TWL4030_SEL_16K			0x08
+#define TWL4030_CODECPDZ		0x02
+#define TWL4030_OPT_MODE		0x01
+#define TWL4030_OPTION_1		(1 << 0)
+#define TWL4030_OPTION_2		(0 << 0)
+
+/* TWL4030_OPTION (0x02) Fields */
+#define TWL4030_ATXL1_EN		(1 << 0)
+#define TWL4030_ATXR1_EN		(1 << 1)
+#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
+#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
+#define TWL4030_ARXL1_VRX_EN		(1 << 4)
+#define TWL4030_ARXR1_EN		(1 << 5)
+#define TWL4030_ARXL2_EN		(1 << 6)
+#define TWL4030_ARXR2_EN		(1 << 7)
+
+/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
+#define TWL4030_MICBIAS2_CTL		0x40
+#define TWL4030_MICBIAS1_CTL		0x20
+#define TWL4030_HSMICBIAS_EN		0x04
+#define TWL4030_MICBIAS2_EN		0x02
+#define TWL4030_MICBIAS1_EN		0x01
+
+/* ANAMICL (0x05) Fields */
+#define TWL4030_CNCL_OFFSET_START	0x80
+#define TWL4030_OFFSET_CNCL_SEL		0x60
+#define TWL4030_OFFSET_CNCL_SEL_ARX1	0x00
+#define TWL4030_OFFSET_CNCL_SEL_ARX2	0x20
+#define TWL4030_OFFSET_CNCL_SEL_VRX	0x40
+#define TWL4030_OFFSET_CNCL_SEL_ALL	0x60
+#define TWL4030_MICAMPL_EN		0x10
+#define TWL4030_CKMIC_EN		0x08
+#define TWL4030_AUXL_EN			0x04
+#define TWL4030_HSMIC_EN		0x02
+#define TWL4030_MAINMIC_EN		0x01
+
+/* ANAMICR (0x06) Fields */
+#define TWL4030_MICAMPR_EN		0x10
+#define TWL4030_AUXR_EN			0x04
+#define TWL4030_SUBMIC_EN		0x01
+
+/* AVADC_CTL (0x07) Fields */
+#define TWL4030_ADCL_EN			0x08
+#define TWL4030_AVADC_CLK_PRIORITY	0x04
+#define TWL4030_ADCR_EN			0x02
+
+/* TWL4030_REG_ADCMICSEL (0x08) Fields */
+#define TWL4030_DIGMIC1_EN		0x08
+#define TWL4030_TX2IN_SEL		0x04
+#define TWL4030_DIGMIC0_EN		0x02
+#define TWL4030_TX1IN_SEL		0x01
+
+/* AUDIO_IF (0x0E) Fields */
+#define TWL4030_AIF_SLAVE_EN		0x80
+#define TWL4030_DATA_WIDTH		0x60
+#define TWL4030_DATA_WIDTH_16S_16W	0x00
+#define TWL4030_DATA_WIDTH_32S_16W	0x40
+#define TWL4030_DATA_WIDTH_32S_24W	0x60
+#define TWL4030_AIF_FORMAT		0x18
+#define TWL4030_AIF_FORMAT_CODEC	0x00
+#define TWL4030_AIF_FORMAT_LEFT		0x08
+#define TWL4030_AIF_FORMAT_RIGHT	0x10
+#define TWL4030_AIF_FORMAT_TDM		0x18
+#define TWL4030_AIF_TRI_EN		0x04
+#define TWL4030_CLK256FS_EN		0x02
+#define TWL4030_AIF_EN			0x01
+
+/* VOICE_IF (0x0F) Fields */
+#define TWL4030_VIF_SLAVE_EN		0x80
+#define TWL4030_VIF_DIN_EN		0x40
+#define TWL4030_VIF_DOUT_EN		0x20
+#define TWL4030_VIF_SWAP		0x10
+#define TWL4030_VIF_FORMAT		0x08
+#define TWL4030_VIF_TRI_EN		0x04
+#define TWL4030_VIF_SUB_EN		0x02
+#define TWL4030_VIF_EN			0x01
+
+/* EAR_CTL (0x21) */
+#define TWL4030_EAR_GAIN		0x30
+
+/* HS_GAIN_SET (0x23) Fields */
+#define TWL4030_HSR_GAIN		0x0C
+#define TWL4030_HSR_GAIN_PWR_DOWN	0x00
+#define TWL4030_HSR_GAIN_PLUS_6DB	0x04
+#define TWL4030_HSR_GAIN_0DB		0x08
+#define TWL4030_HSR_GAIN_MINUS_6DB	0x0C
+#define TWL4030_HSL_GAIN		0x03
+#define TWL4030_HSL_GAIN_PWR_DOWN	0x00
+#define TWL4030_HSL_GAIN_PLUS_6DB	0x01
+#define TWL4030_HSL_GAIN_0DB		0x02
+#define TWL4030_HSL_GAIN_MINUS_6DB	0x03
+
+/* HS_POPN_SET (0x24) Fields */
+#define TWL4030_VMID_EN			0x40
+#define	TWL4030_EXTMUTE			0x20
+#define TWL4030_RAMP_DELAY		0x1C
+#define TWL4030_RAMP_DELAY_20MS		0x00
+#define TWL4030_RAMP_DELAY_40MS		0x04
+#define TWL4030_RAMP_DELAY_81MS		0x08
+#define TWL4030_RAMP_DELAY_161MS	0x0C
+#define TWL4030_RAMP_DELAY_323MS	0x10
+#define TWL4030_RAMP_DELAY_645MS	0x14
+#define TWL4030_RAMP_DELAY_1291MS	0x18
+#define TWL4030_RAMP_DELAY_2581MS	0x1C
+#define TWL4030_RAMP_EN			0x02
+
+/* PREDL_CTL (0x25) */
+#define TWL4030_PREDL_GAIN		0x30
+
+/* PREDR_CTL (0x26) */
+#define TWL4030_PREDR_GAIN		0x30
+
+/* PRECKL_CTL (0x27) */
+#define TWL4030_PRECKL_GAIN		0x30
+
+/* PRECKR_CTL (0x28) */
+#define TWL4030_PRECKR_GAIN		0x30
+
+/* HFL_CTL (0x29, 0x2A) Fields */
+#define TWL4030_HF_CTL_HB_EN		0x04
+#define TWL4030_HF_CTL_LOOP_EN		0x08
+#define TWL4030_HF_CTL_RAMP_EN		0x10
+#define TWL4030_HF_CTL_REF_EN		0x20
+
+/* APLL_CTL (0x3A) Fields */
+#define TWL4030_APLL_EN			0x10
+#define TWL4030_APLL_INFREQ		0x0F
+#define TWL4030_APLL_INFREQ_19200KHZ	0x05
+#define TWL4030_APLL_INFREQ_26000KHZ	0x06
+#define TWL4030_APLL_INFREQ_38400KHZ	0x0F
+
+/* REG_MISC_SET_1 (0x3E) Fields */
+#define TWL4030_CLK64_EN		0x80
+#define TWL4030_SCRAMBLE_EN		0x40
+#define TWL4030_FMLOOP_EN		0x20
+#define TWL4030_SMOOTH_ANAVOL_EN	0x02
+#define TWL4030_DIGMIC_LR_SWAP_EN	0x01
+
+/* VIBRA_CTL (0x45) */
+#define TWL4030_VIBRA_EN		0x01
+#define TWL4030_VIBRA_DIR		0x02
+#define TWL4030_VIBRA_AUDIO_SEL_L1	(0x00 << 2)
+#define TWL4030_VIBRA_AUDIO_SEL_R1	(0x01 << 2)
+#define TWL4030_VIBRA_AUDIO_SEL_L2	(0x02 << 2)
+#define TWL4030_VIBRA_AUDIO_SEL_R2	(0x03 << 2)
+#define TWL4030_VIBRA_SEL		0x10
+#define TWL4030_VIBRA_DIR_SEL		0x20
+
+/* TWL4030 codec resource IDs */
+enum twl4030_codec_res {
+	TWL4030_CODEC_RES_POWER = 0,
+	TWL4030_CODEC_RES_APLL,
+	TWL4030_CODEC_RES_MAX,
+};
+
+int twl4030_codec_disable_resource(enum twl4030_codec_res id);
+int twl4030_codec_enable_resource(enum twl4030_codec_res id);
+unsigned int twl4030_codec_get_mclk(void);
+
+#endif	/* End of __TWL4030_CODEC_H__ */
diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
new file mode 100644
index 0000000..aa9c378
--- /dev/null
+++ b/include/linux/mfd/ucb1x00.h
@@ -0,0 +1,258 @@
+/*
+ *  linux/include/mfd/ucb1x00.h
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+#ifndef UCB1200_H
+#define UCB1200_H
+
+#include <linux/mfd/mcp.h>
+#include <linux/gpio.h>
+
+#define UCB_IO_DATA	0x00
+#define UCB_IO_DIR	0x01
+
+#define UCB_IO_0		(1 << 0)
+#define UCB_IO_1		(1 << 1)
+#define UCB_IO_2		(1 << 2)
+#define UCB_IO_3		(1 << 3)
+#define UCB_IO_4		(1 << 4)
+#define UCB_IO_5		(1 << 5)
+#define UCB_IO_6		(1 << 6)
+#define UCB_IO_7		(1 << 7)
+#define UCB_IO_8		(1 << 8)
+#define UCB_IO_9		(1 << 9)
+
+#define UCB_IE_RIS	0x02
+#define UCB_IE_FAL	0x03
+#define UCB_IE_STATUS	0x04
+#define UCB_IE_CLEAR	0x04
+#define UCB_IE_ADC		(1 << 11)
+#define UCB_IE_TSPX		(1 << 12)
+#define UCB_IE_TSMX		(1 << 13)
+#define UCB_IE_TCLIP		(1 << 14)
+#define UCB_IE_ACLIP		(1 << 15)
+
+#define UCB_IRQ_TSPX		12
+
+#define UCB_TC_A	0x05
+#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
+#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
+
+#define UCB_TC_B	0x06
+#define UCB_TC_B_VOICE_ENA	(1 << 3)
+#define UCB_TC_B_CLIP		(1 << 4)
+#define UCB_TC_B_ATT		(1 << 6)
+#define UCB_TC_B_SIDE_ENA	(1 << 11)
+#define UCB_TC_B_MUTE		(1 << 13)
+#define UCB_TC_B_IN_ENA		(1 << 14)
+#define UCB_TC_B_OUT_ENA	(1 << 15)
+
+#define UCB_AC_A	0x07
+#define UCB_AC_B	0x08
+#define UCB_AC_B_LOOP		(1 << 8)
+#define UCB_AC_B_MUTE		(1 << 13)
+#define UCB_AC_B_IN_ENA		(1 << 14)
+#define UCB_AC_B_OUT_ENA	(1 << 15)
+
+#define UCB_TS_CR	0x09
+#define UCB_TS_CR_TSMX_POW	(1 << 0)
+#define UCB_TS_CR_TSPX_POW	(1 << 1)
+#define UCB_TS_CR_TSMY_POW	(1 << 2)
+#define UCB_TS_CR_TSPY_POW	(1 << 3)
+#define UCB_TS_CR_TSMX_GND	(1 << 4)
+#define UCB_TS_CR_TSPX_GND	(1 << 5)
+#define UCB_TS_CR_TSMY_GND	(1 << 6)
+#define UCB_TS_CR_TSPY_GND	(1 << 7)
+#define UCB_TS_CR_MODE_INT	(0 << 8)
+#define UCB_TS_CR_MODE_PRES	(1 << 8)
+#define UCB_TS_CR_MODE_POS	(2 << 8)
+#define UCB_TS_CR_BIAS_ENA	(1 << 11)
+#define UCB_TS_CR_TSPX_LOW	(1 << 12)
+#define UCB_TS_CR_TSMX_LOW	(1 << 13)
+
+#define UCB_ADC_CR	0x0a
+#define UCB_ADC_SYNC_ENA	(1 << 0)
+#define UCB_ADC_VREFBYP_CON	(1 << 1)
+#define UCB_ADC_INP_TSPX	(0 << 2)
+#define UCB_ADC_INP_TSMX	(1 << 2)
+#define UCB_ADC_INP_TSPY	(2 << 2)
+#define UCB_ADC_INP_TSMY	(3 << 2)
+#define UCB_ADC_INP_AD0		(4 << 2)
+#define UCB_ADC_INP_AD1		(5 << 2)
+#define UCB_ADC_INP_AD2		(6 << 2)
+#define UCB_ADC_INP_AD3		(7 << 2)
+#define UCB_ADC_EXT_REF		(1 << 5)
+#define UCB_ADC_START		(1 << 7)
+#define UCB_ADC_ENA		(1 << 15)
+
+#define UCB_ADC_DATA	0x0b
+#define UCB_ADC_DAT_VAL		(1 << 15)
+#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
+
+#define UCB_ID		0x0c
+#define UCB_ID_1200		0x1004
+#define UCB_ID_1300		0x1005
+#define UCB_ID_TC35143          0x9712
+
+#define UCB_MODE	0x0d
+#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
+#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
+
+
+struct ucb1x00_irq {
+	void *devid;
+	void (*fn)(int, void *);
+};
+
+struct ucb1x00 {
+	spinlock_t		lock;
+	struct mcp		*mcp;
+	unsigned int		irq;
+	struct semaphore	adc_sem;
+	spinlock_t		io_lock;
+	u16			id;
+	u16			io_dir;
+	u16			io_out;
+	u16			adc_cr;
+	u16			irq_fal_enbl;
+	u16			irq_ris_enbl;
+	struct ucb1x00_irq	irq_handler[16];
+	struct device		dev;
+	struct list_head	node;
+	struct list_head	devs;
+	struct gpio_chip 	gpio;
+};
+
+struct ucb1x00_driver;
+
+struct ucb1x00_dev {
+	struct list_head	dev_node;
+	struct list_head	drv_node;
+	struct ucb1x00		*ucb;
+	struct ucb1x00_driver	*drv;
+	void			*priv;
+};
+
+struct ucb1x00_driver {
+	struct list_head	node;
+	struct list_head	devs;
+	int	(*add)(struct ucb1x00_dev *dev);
+	void	(*remove)(struct ucb1x00_dev *dev);
+	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
+	int	(*resume)(struct ucb1x00_dev *dev);
+};
+
+#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
+
+int ucb1x00_register_driver(struct ucb1x00_driver *);
+void ucb1x00_unregister_driver(struct ucb1x00_driver *);
+
+/**
+ *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
+ *	@ucb: UCB1x00 structure describing chip
+ *
+ *	Return the SIB clock rate in Hz.
+ */
+static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
+{
+	return mcp_get_sclk_rate(ucb->mcp);
+}
+
+/**
+ *	ucb1x00_enable - enable the UCB1x00 SIB clock
+ *	@ucb: UCB1x00 structure describing chip
+ *
+ *	Enable the SIB clock.  This can be called multiple times.
+ */
+static inline void ucb1x00_enable(struct ucb1x00 *ucb)
+{
+	mcp_enable(ucb->mcp);
+}
+
+/**
+ *	ucb1x00_disable - disable the UCB1x00 SIB clock
+ *	@ucb: UCB1x00 structure describing chip
+ *
+ *	Disable the SIB clock.  The SIB clock will only be disabled
+ *	when the number of ucb1x00_enable calls match the number of
+ *	ucb1x00_disable calls.
+ */
+static inline void ucb1x00_disable(struct ucb1x00 *ucb)
+{
+	mcp_disable(ucb->mcp);
+}
+
+/**
+ *	ucb1x00_reg_write - write a UCB1x00 register
+ *	@ucb: UCB1x00 structure describing chip
+ *	@reg: UCB1x00 4-bit register index to write
+ *	@val: UCB1x00 16-bit value to write
+ *
+ *	Write the UCB1x00 register @reg with value @val.  The SIB
+ *	clock must be running for this function to return.
+ */
+static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
+{
+	mcp_reg_write(ucb->mcp, reg, val);
+}
+
+/**
+ *	ucb1x00_reg_read - read a UCB1x00 register
+ *	@ucb: UCB1x00 structure describing chip
+ *	@reg: UCB1x00 4-bit register index to write
+ *
+ *	Read the UCB1x00 register @reg and return its value.  The SIB
+ *	clock must be running for this function to return.
+ */
+static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
+{
+	return mcp_reg_read(ucb->mcp, reg);
+}
+/**
+ *	ucb1x00_set_audio_divisor - 
+ *	@ucb: UCB1x00 structure describing chip
+ *	@div: SIB clock divisor
+ */
+static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
+{
+	mcp_set_audio_divisor(ucb->mcp, div);
+}
+
+/**
+ *	ucb1x00_set_telecom_divisor -
+ *	@ucb: UCB1x00 structure describing chip
+ *	@div: SIB clock divisor
+ */
+static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
+{
+	mcp_set_telecom_divisor(ucb->mcp, div);
+}
+
+void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
+void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
+unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
+
+#define UCB_NOSYNC	(0)
+#define UCB_SYNC	(1)
+
+unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
+void ucb1x00_adc_enable(struct ucb1x00 *ucb);
+void ucb1x00_adc_disable(struct ucb1x00 *ucb);
+
+/*
+ * Which edges of the IRQ do you want to control today?
+ */
+#define UCB_RISING	(1 << 0)
+#define UCB_FALLING	(1 << 1)
+
+int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
+void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
+void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
+int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
+
+#endif
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
index f954663..955d30f 100644
--- a/include/linux/mfd/wm831x/regulator.h
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -1212,7 +1212,7 @@
 #define WM831X_LDO1_OK_SHIFT                         0  /* LDO1_OK */
 #define WM831X_LDO1_OK_WIDTH                         1  /* LDO1_OK */
 
-#define WM831X_ISINK_MAX_ISEL 56
-extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
+#define WM831X_ISINK_MAX_ISEL 55
+extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1];
 
 #endif
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h
index 2dbfb5a..33b2ea0 100644
--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -28,6 +28,7 @@
 #define SDIO_DEVICE_ID_INTEL_IWMC3200TOP	0x1404
 #define SDIO_DEVICE_ID_INTEL_IWMC3200GPS	0x1405
 #define SDIO_DEVICE_ID_INTEL_IWMC3200BT		0x1406
+#define SDIO_DEVICE_ID_INTEL_IWMC3200WIMAX_2G5	0x1407
 
 #define SDIO_VENDOR_ID_MARVELL			0x02df
 #define SDIO_DEVICE_ID_MARVELL_LIBERTAS		0x9103
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 08bc776..c5f3d53 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -59,20 +59,24 @@
 	unsigned char vifc_flags;	/* VIFF_ flags */
 	unsigned char vifc_threshold;	/* ttl limit */
 	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-	struct in_addr vifc_lcl_addr;	/* Our address */
+	union {
+		struct in_addr vifc_lcl_addr;     /* Local interface address */
+		int            vifc_lcl_ifindex;  /* Local interface index   */
+	};
 	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
 };
 
-#define VIFF_TUNNEL	0x1	/* IPIP tunnel */
-#define VIFF_SRCRT	0x2	/* NI */
-#define VIFF_REGISTER	0x4	/* register vif	*/
+#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
+#define VIFF_SRCRT		0x2	/* NI */
+#define VIFF_REGISTER		0x4	/* register vif	*/
+#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
+					   vifc_lcl_addr to find an interface */
 
 /*
  *	Cache manipulation structures for mrouted and PIMd
  */
  
-struct mfcctl
-{
+struct mfcctl {
 	struct in_addr mfcc_origin;		/* Origin of mcast	*/
 	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
 	vifi_t	mfcc_parent;			/* Where it arrived	*/
@@ -87,8 +91,7 @@
  *	Group count retrieval for mrouted
  */
  
-struct sioc_sg_req
-{
+struct sioc_sg_req {
 	struct in_addr src;
 	struct in_addr grp;
 	unsigned long pktcnt;
@@ -100,8 +103,7 @@
  *	To get vif packet counts
  */
 
-struct sioc_vif_req
-{
+struct sioc_vif_req {
 	vifi_t	vifi;		/* Which iface */
 	unsigned long icount;	/* In packets */
 	unsigned long ocount;	/* Out packets */
@@ -114,8 +116,7 @@
  *	data. Magically happens to be like an IP packet as per the original
  */
  
-struct igmpmsg
-{
+struct igmpmsg {
 	__u32 unused1,unused2;
 	unsigned char im_msgtype;		/* What is this */
 	unsigned char im_mbz;			/* Must be zero */
@@ -176,8 +177,7 @@
 }
 #endif
 
-struct vif_device
-{
+struct vif_device {
 	struct net_device 	*dev;			/* Device we are using */
 	unsigned long	bytes_in,bytes_out;
 	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
@@ -190,8 +190,7 @@
 
 #define VIFF_STATIC 0x8000
 
-struct mfc_cache 
-{
+struct mfc_cache {
 	struct mfc_cache *next;			/* Next entry on cache line 	*/
 #ifdef CONFIG_NET_NS
 	struct net *mfc_net;
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index b191865..2caa1a8 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -75,8 +75,7 @@
  *	Cache manipulation structures for mrouted and PIMd
  */
 
-struct mf6cctl
-{
+struct mf6cctl {
 	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
 	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
 	mifi_t	mf6cc_parent;			/* Where it arrived	*/
@@ -87,8 +86,7 @@
  *	Group count retrieval for pim6sd
  */
 
-struct sioc_sg_req6
-{
+struct sioc_sg_req6 {
 	struct sockaddr_in6 src;
 	struct sockaddr_in6 grp;
 	unsigned long pktcnt;
@@ -100,8 +98,7 @@
  *	To get vif packet counts
  */
 
-struct sioc_mif_req6
-{
+struct sioc_mif_req6 {
 	mifi_t	mifi;		/* Which iface */
 	unsigned long icount;	/* In packets */
 	unsigned long ocount;	/* Out packets */
@@ -172,8 +169,7 @@
 }
 #endif
 
-struct mif_device
-{
+struct mif_device {
 	struct net_device 	*dev;			/* Device we are using */
 	unsigned long	bytes_in,bytes_out;
 	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
@@ -185,8 +181,7 @@
 
 #define VIFF_STATIC 0x8000
 
-struct mfc6_cache
-{
+struct mfc6_cache {
 	struct mfc6_cache *next;		/* Next entry on cache line 	*/
 #ifdef CONFIG_NET_NS
 	struct net *mfc6_net;
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
index 12c9de1..a7003b7 100644
--- a/include/linux/neighbour.h
+++ b/include/linux/neighbour.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/netlink.h>
 
-struct ndmsg
-{
+struct ndmsg {
 	__u8		ndm_family;
 	__u8		ndm_pad1;
 	__u16		ndm_pad2;
@@ -15,8 +14,7 @@
 	__u8		ndm_type;
 };
 
-enum
-{
+enum {
 	NDA_UNSPEC,
 	NDA_DST,
 	NDA_LLADDR,
@@ -56,8 +54,7 @@
    NUD_PERMANENT is also cannot be deleted by garbage collectors.
  */
 
-struct nda_cacheinfo
-{
+struct nda_cacheinfo {
 	__u32		ndm_confirmed;
 	__u32		ndm_used;
 	__u32		ndm_updated;
@@ -89,8 +86,7 @@
  * device.
  ****/
 
-struct ndt_stats
-{
+struct ndt_stats {
 	__u64		ndts_allocs;
 	__u64		ndts_destroys;
 	__u64		ndts_hash_grows;
@@ -124,15 +120,13 @@
 };
 #define NDTPA_MAX (__NDTPA_MAX - 1)
 
-struct ndtmsg
-{
+struct ndtmsg {
 	__u8		ndtm_family;
 	__u8		ndtm_pad1;
 	__u16		ndtm_pad2;
 };
 
-struct ndt_config
-{
+struct ndt_config {
 	__u16		ndtc_key_len;
 	__u16		ndtc_entry_size;
 	__u32		ndtc_entries;
diff --git a/include/linux/net.h b/include/linux/net.h
index 529a093..5e8083c 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -41,6 +41,7 @@
 #define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
 #define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
 #define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
+#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
 
 typedef enum {
 	SS_FREE = 0,			/* not allocated		*/
@@ -198,9 +199,13 @@
 				       struct pipe_inode_info *pipe, size_t len, unsigned int flags);
 };
 
+#define DECLARE_SOCKADDR(type, dst, src)	\
+	type dst = ({ __sockaddr_check_size(sizeof(*dst)); (type) src; })
+
 struct net_proto_family {
 	int		family;
-	int		(*create)(struct net *net, struct socket *sock, int protocol);
+	int		(*create)(struct net *net, struct socket *sock,
+				  int protocol, int kern);
 	struct module	*owner;
 };
 
@@ -263,89 +268,6 @@
 extern int kernel_sock_shutdown(struct socket *sock,
 				enum sock_shutdown_cmd how);
 
-#ifndef CONFIG_SMP
-#define SOCKOPS_WRAPPED(name) name
-#define SOCKOPS_WRAP(name, fam)
-#else
-
-#define SOCKOPS_WRAPPED(name) __unlocked_##name
-
-#define SOCKCALL_WRAP(name, call, parms, args)		\
-static int __lock_##name##_##call  parms		\
-{							\
-	int ret;					\
-	lock_kernel();					\
-	ret = __unlocked_##name##_ops.call  args ;\
-	unlock_kernel();				\
-	return ret;					\
-}
-
-#define SOCKCALL_UWRAP(name, call, parms, args)		\
-static unsigned int __lock_##name##_##call  parms	\
-{							\
-	int ret;					\
-	lock_kernel();					\
-	ret = __unlocked_##name##_ops.call  args ;\
-	unlock_kernel();				\
-	return ret;					\
-}
-
-
-#define SOCKOPS_WRAP(name, fam)					\
-SOCKCALL_WRAP(name, release, (struct socket *sock), (sock))	\
-SOCKCALL_WRAP(name, bind, (struct socket *sock, struct sockaddr *uaddr, int addr_len), \
-	      (sock, uaddr, addr_len))				\
-SOCKCALL_WRAP(name, connect, (struct socket *sock, struct sockaddr * uaddr, \
-			      int addr_len, int flags), 	\
-	      (sock, uaddr, addr_len, flags))			\
-SOCKCALL_WRAP(name, socketpair, (struct socket *sock1, struct socket *sock2), \
-	      (sock1, sock2))					\
-SOCKCALL_WRAP(name, accept, (struct socket *sock, struct socket *newsock, \
-			 int flags), (sock, newsock, flags)) \
-SOCKCALL_WRAP(name, getname, (struct socket *sock, struct sockaddr *uaddr, \
-			 int *addr_len, int peer), (sock, uaddr, addr_len, peer)) \
-SOCKCALL_UWRAP(name, poll, (struct file *file, struct socket *sock, struct poll_table_struct *wait), \
-	      (file, sock, wait)) \
-SOCKCALL_WRAP(name, ioctl, (struct socket *sock, unsigned int cmd, \
-			 unsigned long arg), (sock, cmd, arg)) \
-SOCKCALL_WRAP(name, compat_ioctl, (struct socket *sock, unsigned int cmd, \
-			 unsigned long arg), (sock, cmd, arg)) \
-SOCKCALL_WRAP(name, listen, (struct socket *sock, int len), (sock, len)) \
-SOCKCALL_WRAP(name, shutdown, (struct socket *sock, int flags), (sock, flags)) \
-SOCKCALL_WRAP(name, setsockopt, (struct socket *sock, int level, int optname, \
-			 char __user *optval, unsigned int optlen), (sock, level, optname, optval, optlen)) \
-SOCKCALL_WRAP(name, getsockopt, (struct socket *sock, int level, int optname, \
-			 char __user *optval, int __user *optlen), (sock, level, optname, optval, optlen)) \
-SOCKCALL_WRAP(name, sendmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len), \
-	      (iocb, sock, m, len)) \
-SOCKCALL_WRAP(name, recvmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len, int flags), \
-	      (iocb, sock, m, len, flags)) \
-SOCKCALL_WRAP(name, mmap, (struct file *file, struct socket *sock, struct vm_area_struct *vma), \
-	      (file, sock, vma)) \
-	      \
-static const struct proto_ops name##_ops = {			\
-	.family		= fam,				\
-	.owner		= THIS_MODULE,			\
-	.release	= __lock_##name##_release,	\
-	.bind		= __lock_##name##_bind,		\
-	.connect	= __lock_##name##_connect,	\
-	.socketpair	= __lock_##name##_socketpair,	\
-	.accept		= __lock_##name##_accept,	\
-	.getname	= __lock_##name##_getname,	\
-	.poll		= __lock_##name##_poll,		\
-	.ioctl		= __lock_##name##_ioctl,	\
-	.compat_ioctl	= __lock_##name##_compat_ioctl,	\
-	.listen		= __lock_##name##_listen,	\
-	.shutdown	= __lock_##name##_shutdown,	\
-	.setsockopt	= __lock_##name##_setsockopt,	\
-	.getsockopt	= __lock_##name##_getsockopt,	\
-	.sendmsg	= __lock_##name##_sendmsg,	\
-	.recvmsg	= __lock_##name##_recvmsg,	\
-	.mmap		= __lock_##name##_mmap,		\
-};
-
-#endif
-
 #define MODULE_ALIAS_NETPROTO(proto) \
 	MODULE_ALIAS("net-pf-" __stringify(proto))
 
@@ -358,6 +280,7 @@
 
 #ifdef CONFIG_SYSCTL
 #include <linux/sysctl.h>
+#include <linux/ratelimit.h>
 extern struct ratelimit_state net_ratelimit_state;
 #endif
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 812a5f3..a3fccc8 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -63,30 +63,69 @@
 #define HAVE_FREE_NETDEV		/* free_netdev() */
 #define HAVE_NETDEV_PRIV		/* netdev_priv() */
 
-#define NET_XMIT_SUCCESS	0
-#define NET_XMIT_DROP		1	/* skb dropped			*/
-#define NET_XMIT_CN		2	/* congestion notification	*/
-#define NET_XMIT_POLICED	3	/* skb is shot by police	*/
-#define NET_XMIT_MASK		0xFFFF	/* qdisc flags in net/sch_generic.h */
-
 /* Backlog congestion levels */
-#define NET_RX_SUCCESS		0   /* keep 'em coming, baby */
-#define NET_RX_DROP		1  /* packet dropped */
+#define NET_RX_SUCCESS		0	/* keep 'em coming, baby */
+#define NET_RX_DROP		1	/* packet dropped */
+
+/*
+ * Transmit return codes: transmit return codes originate from three different
+ * namespaces:
+ *
+ * - qdisc return codes
+ * - driver transmit return codes
+ * - errno values
+ *
+ * Drivers are allowed to return any one of those in their hard_start_xmit()
+ * function. Real network devices commonly used with qdiscs should only return
+ * the driver transmit return codes though - when qdiscs are used, the actual
+ * transmission happens asynchronously, so the value is not propagated to
+ * higher layers. Virtual network devices transmit synchronously, in this case
+ * the driver transmit return codes are consumed by dev_queue_xmit(), all
+ * others are propagated to higher layers.
+ */
+
+/* qdisc ->enqueue() return codes. */
+#define NET_XMIT_SUCCESS	0x00
+#define NET_XMIT_DROP		0x01	/* skb dropped			*/
+#define NET_XMIT_CN		0x02	/* congestion notification	*/
+#define NET_XMIT_POLICED	0x03	/* skb is shot by police	*/
+#define NET_XMIT_MASK		0x0f	/* qdisc flags in net/sch_generic.h */
 
 /* NET_XMIT_CN is special. It does not guarantee that this packet is lost. It
  * indicates that the device will soon be dropping packets, or already drops
  * some packets of the same priority; prompting us to send less aggressively. */
-#define net_xmit_eval(e)	((e) == NET_XMIT_CN? 0 : (e))
+#define net_xmit_eval(e)	((e) == NET_XMIT_CN ? 0 : (e))
 #define net_xmit_errno(e)	((e) != NET_XMIT_CN ? -ENOBUFS : 0)
 
 /* Driver transmit return codes */
+#define NETDEV_TX_MASK		0xf0
+
 enum netdev_tx {
-	NETDEV_TX_OK = 0,	/* driver took care of packet */
-	NETDEV_TX_BUSY,		/* driver tx path was busy*/
-	NETDEV_TX_LOCKED = -1,	/* driver tx lock was already taken */
+	__NETDEV_TX_MIN	 = INT_MIN,	/* make sure enum is signed */
+	NETDEV_TX_OK	 = 0x00,	/* driver took care of packet */
+	NETDEV_TX_BUSY	 = 0x10,	/* driver tx path was busy*/
+	NETDEV_TX_LOCKED = 0x20,	/* driver tx lock was already taken */
 };
 typedef enum netdev_tx netdev_tx_t;
 
+/*
+ * Current order: NETDEV_TX_MASK > NET_XMIT_MASK >= 0 is significant;
+ * hard_start_xmit() return < NET_XMIT_MASK means skb was consumed.
+ */
+static inline bool dev_xmit_complete(int rc)
+{
+	/*
+	 * Positive cases with an skb consumed by a driver:
+	 * - successful transmission (rc == NETDEV_TX_OK)
+	 * - error while transmitting (rc < 0)
+	 * - error while queueing to a different device (rc & NET_XMIT_MASK)
+	 */
+	if (likely(rc < NET_XMIT_MASK))
+		return true;
+
+	return false;
+}
+
 #endif
 
 #define MAX_ADDR_LEN	32		/* Largest hardware address length */
@@ -125,8 +164,7 @@
  *	with byte counters.
  */
 
-struct net_device_stats
-{
+struct net_device_stats {
 	unsigned long	rx_packets;		/* total packets received	*/
 	unsigned long	tx_packets;		/* total packets transmitted	*/
 	unsigned long	rx_bytes;		/* total bytes received 	*/
@@ -179,8 +217,7 @@
 struct neigh_parms;
 struct sk_buff;
 
-struct netif_rx_stats
-{
+struct netif_rx_stats {
 	unsigned total;
 	unsigned dropped;
 	unsigned time_squeeze;
@@ -189,8 +226,7 @@
 
 DECLARE_PER_CPU(struct netif_rx_stats, netdev_rx_stat);
 
-struct dev_addr_list
-{
+struct dev_addr_list {
 	struct dev_addr_list	*next;
 	u8			da_addr[MAX_ADDR_LEN];
 	u8			da_addrlen;
@@ -227,8 +263,7 @@
 	int			count;
 };
 
-struct hh_cache
-{
+struct hh_cache {
 	struct hh_cache *hh_next;	/* Next entry			     */
 	atomic_t	hh_refcnt;	/* number of users                   */
 /*
@@ -291,8 +326,7 @@
  * code.
  */
 
-enum netdev_state_t
-{
+enum netdev_state_t {
 	__LINK_STATE_START,
 	__LINK_STATE_PRESENT,
 	__LINK_STATE_NOCARRIER,
@@ -341,20 +375,20 @@
 	struct sk_buff		*skb;
 };
 
-enum
-{
+enum {
 	NAPI_STATE_SCHED,	/* Poll is scheduled */
 	NAPI_STATE_DISABLE,	/* Disable pending */
 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };
 
-enum {
+enum gro_result {
 	GRO_MERGED,
 	GRO_MERGED_FREE,
 	GRO_HELD,
 	GRO_NORMAL,
 	GRO_DROP,
 };
+typedef enum gro_result gro_result_t;
 
 extern void __napi_schedule(struct napi_struct *n);
 
@@ -457,8 +491,7 @@
 # define napi_synchronize(n)	barrier()
 #endif
 
-enum netdev_queue_state_t
-{
+enum netdev_queue_state_t {
 	__QUEUE_STATE_XOFF,
 	__QUEUE_STATE_FROZEN,
 };
@@ -635,6 +668,10 @@
 						      unsigned int sgc);
 	int			(*ndo_fcoe_ddp_done)(struct net_device *dev,
 						     u16 xid);
+#define NETDEV_FCOE_WWNN 0
+#define NETDEV_FCOE_WWPN 1
+	int			(*ndo_fcoe_get_wwn)(struct net_device *dev,
+						    u64 *wwn, int type);
 #endif
 };
 
@@ -648,8 +685,7 @@
  *	moves out.
  */
 
-struct net_device
-{
+struct net_device {
 
 	/*
 	 * This is the first field of the "visible" part of this structure
@@ -683,6 +719,7 @@
 
 	struct list_head	dev_list;
 	struct list_head	napi_list;
+	struct list_head	unreg_list;
 
 	/* Net device features */
 	unsigned long		features;
@@ -859,7 +896,7 @@
 	/* device index hash chain */
 	struct hlist_node	index_hlist;
 
-	struct net_device	*link_watch_next;
+	struct list_head	link_watch_list;
 
 	/* register/unregister state machine */
 	enum { NETREG_UNINITIALIZED=0,
@@ -894,8 +931,8 @@
 
 	/* class/net/name entry */
 	struct device		dev;
-	/* space for optional statistics and wireless sysfs groups */
-	const struct attribute_group *sysfs_groups[3];
+	/* space for optional device, statistics, and wireless sysfs groups */
+	const struct attribute_group *sysfs_groups[4];
 
 	/* rtnetlink link ops */
 	const struct rtnl_link_ops *rtnl_link_ops;
@@ -909,7 +946,7 @@
 
 #ifdef CONFIG_DCB
 	/* Data Center Bridging netlink ops */
-	struct dcbnl_rtnl_ops *dcbnl_ops;
+	const struct dcbnl_rtnl_ops *dcbnl_ops;
 #endif
 
 #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
@@ -1075,10 +1112,16 @@
 
 #define for_each_netdev(net, d)		\
 		list_for_each_entry(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_reverse(net, d)	\
+		list_for_each_entry_reverse(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_rcu(net, d)		\
+		list_for_each_entry_rcu(d, &(net)->dev_base_head, dev_list)
 #define for_each_netdev_safe(net, d, n)	\
 		list_for_each_entry_safe(d, n, &(net)->dev_base_head, dev_list)
 #define for_each_netdev_continue(net, d)		\
 		list_for_each_entry_continue(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_continue_rcu(net, d)		\
+	list_for_each_entry_continue_rcu(d, &(net)->dev_base_head, dev_list)
 #define net_device_entry(lh)	list_entry(lh, struct net_device, dev_list)
 
 static inline struct net_device *next_net_device(struct net_device *dev)
@@ -1091,6 +1134,16 @@
 	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
 }
 
+static inline struct net_device *next_net_device_rcu(struct net_device *dev)
+{
+	struct list_head *lh;
+	struct net *net;
+
+	net = dev_net(dev);
+	lh = rcu_dereference(dev->dev_list.next);
+	return lh == &net->dev_base_head ? NULL : net_device_entry(lh);
+}
+
 static inline struct net_device *first_net_device(struct net *net)
 {
 	return list_empty(&net->dev_base_head) ? NULL :
@@ -1109,6 +1162,7 @@
 extern struct net_device	*dev_get_by_flags(struct net *net, unsigned short flags,
 						  unsigned short mask);
 extern struct net_device	*dev_get_by_name(struct net *net, const char *name);
+extern struct net_device	*dev_get_by_name_rcu(struct net *net, const char *name);
 extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
 extern int		dev_alloc_name(struct net_device *dev, const char *name);
 extern int		dev_open(struct net_device *dev);
@@ -1116,7 +1170,14 @@
 extern void		dev_disable_lro(struct net_device *dev);
 extern int		dev_queue_xmit(struct sk_buff *skb);
 extern int		register_netdevice(struct net_device *dev);
-extern void		unregister_netdevice(struct net_device *dev);
+extern void		unregister_netdevice_queue(struct net_device *dev,
+						   struct list_head *head);
+extern void		unregister_netdevice_many(struct list_head *head);
+static inline void unregister_netdevice(struct net_device *dev)
+{
+	unregister_netdevice_queue(dev, NULL);
+}
+
 extern void		free_netdev(struct net_device *dev);
 extern void		synchronize_net(void);
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
@@ -1127,6 +1188,7 @@
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
 extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*dev_get_by_index_rcu(struct net *net, int ifindex);
 extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
@@ -1212,8 +1274,7 @@
  * Incoming packets are placed on per-cpu queues so that
  * no locking is needed.
  */
-struct softnet_data
-{
+struct softnet_data {
 	struct Qdisc		*output_queue;
 	struct sk_buff_head	input_pkt_queue;
 	struct list_head	poll_list;
@@ -1467,18 +1528,19 @@
 #define HAVE_NETIF_RECEIVE_SKB 1
 extern int		netif_receive_skb(struct sk_buff *skb);
 extern void		napi_gro_flush(struct napi_struct *napi);
-extern int		dev_gro_receive(struct napi_struct *napi,
+extern gro_result_t	dev_gro_receive(struct napi_struct *napi,
 					struct sk_buff *skb);
-extern int		napi_skb_finish(int ret, struct sk_buff *skb);
-extern int		napi_gro_receive(struct napi_struct *napi,
+extern gro_result_t	napi_skb_finish(gro_result_t ret, struct sk_buff *skb);
+extern gro_result_t	napi_gro_receive(struct napi_struct *napi,
 					 struct sk_buff *skb);
 extern void		napi_reuse_skb(struct napi_struct *napi,
 				       struct sk_buff *skb);
 extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
-extern int		napi_frags_finish(struct napi_struct *napi,
-					  struct sk_buff *skb, int ret);
+extern gro_result_t	napi_frags_finish(struct napi_struct *napi,
+					  struct sk_buff *skb,
+					  gro_result_t ret);
 extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
-extern int		napi_gro_frags(struct napi_struct *napi);
+extern gro_result_t	napi_gro_frags(struct napi_struct *napi);
 
 static inline void napi_free_frags(struct napi_struct *napi)
 {
@@ -1502,6 +1564,8 @@
 extern int		dev_hard_start_xmit(struct sk_buff *skb,
 					    struct net_device *dev,
 					    struct netdev_queue *txq);
+extern int		dev_forward_skb(struct net_device *dev,
+					struct sk_buff *skb);
 
 extern int		netdev_budget;
 
@@ -1540,6 +1604,7 @@
  */
 
 extern void linkwatch_fire_event(struct net_device *dev);
+extern void linkwatch_forget_dev(struct net_device *dev);
 
 /**
  *	netif_carrier_ok - test if carrier present
@@ -1609,7 +1674,8 @@
  *
  * Check if carrier is operational
  */
-static inline int netif_oper_up(const struct net_device *dev) {
+static inline int netif_oper_up(const struct net_device *dev)
+{
 	return (dev->operstate == IF_OPER_UP ||
 		dev->operstate == IF_OPER_UNKNOWN /* backward compat */);
 }
@@ -1880,6 +1946,7 @@
 extern void		dev_load(struct net *net, const char *name);
 extern void		dev_mcast_init(void);
 extern const struct net_device_stats *dev_get_stats(struct net_device *dev);
+extern void		dev_txq_stats_fold(const struct net_device *dev, struct net_device_stats *stats);
 
 extern int		netdev_max_backlog;
 extern int		weight_p;
@@ -1914,6 +1981,9 @@
 					unsigned long mask);
 unsigned long netdev_fix_features(unsigned long features, const char *name);
 
+void netif_stacked_transfer_operstate(const struct net_device *rootdev,
+					struct net_device *dev);
+
 static inline int net_gso_ok(int features, int gso_type)
 {
 	int feature = gso_type << NETIF_F_GSO_SHIFT;
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 6132b5e..48c5496 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -93,8 +93,7 @@
 			       const struct net_device *out,
 			       int (*okfn)(struct sk_buff *));
 
-struct nf_hook_ops
-{
+struct nf_hook_ops {
 	struct list_head list;
 
 	/* User fills in from here down. */
@@ -106,8 +105,7 @@
 	int priority;
 };
 
-struct nf_sockopt_ops
-{
+struct nf_sockopt_ops {
 	struct list_head list;
 
 	u_int8_t pf;
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index a8248ee..a374787 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -3,8 +3,7 @@
 /* Connection state tracking for netfilter.  This is separated from,
    but required by, the NAT layer; it can also be used by an iptables
    extension. */
-enum ip_conntrack_info
-{
+enum ip_conntrack_info {
 	/* Part of an established connection (either direction). */
 	IP_CT_ESTABLISHED,
 
@@ -76,8 +75,7 @@
 };
 
 #ifdef __KERNEL__
-struct ip_conntrack_stat
-{
+struct ip_conntrack_stat {
 	unsigned int searched;
 	unsigned int found;
 	unsigned int new;
diff --git a/include/linux/netfilter/nf_conntrack_ftp.h b/include/linux/netfilter/nf_conntrack_ftp.h
index 47727d7..3e3aa08 100644
--- a/include/linux/netfilter/nf_conntrack_ftp.h
+++ b/include/linux/netfilter/nf_conntrack_ftp.h
@@ -3,8 +3,7 @@
 /* FTP tracking. */
 
 /* This enum is exposed to userspace */
-enum nf_ct_ftp_type
-{
+enum nf_ct_ftp_type {
 	/* PORT command from client */
 	NF_CT_FTP_PORT,
 	/* PASV response from server */
diff --git a/include/linux/netfilter/nf_conntrack_sctp.h b/include/linux/netfilter/nf_conntrack_sctp.h
index 768f78c..ceeefe6 100644
--- a/include/linux/netfilter/nf_conntrack_sctp.h
+++ b/include/linux/netfilter/nf_conntrack_sctp.h
@@ -16,8 +16,7 @@
 	SCTP_CONNTRACK_MAX
 };
 
-struct ip_ct_sctp
-{
+struct ip_ct_sctp {
 	enum sctp_conntrack state;
 
 	__be32 vtag[IP_CT_DIR_MAX];
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 4352fee..6e135f9 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -55,8 +55,7 @@
 	u_int8_t	flags;		/* per direction options */
 };
 
-struct ip_ct_tcp
-{
+struct ip_ct_tcp {
 	struct ip_ct_tcp_state seen[2];	/* connection parameters per direction */
 	u_int8_t	state;		/* state of the connection (enum tcp_conntrack) */
 	/* For detecting stale connections */
@@ -67,6 +66,9 @@
 	u_int32_t	last_ack;	/* Last sequence number seen in opposite dir */
 	u_int32_t	last_end;	/* Last seq + len */
 	u_int16_t	last_win;	/* Last window advertisement seen in dir */
+	/* For SYN packets while we may be out-of-sync */
+	u_int8_t	last_wscale;	/* Last window scaling factor seen */
+	u_int8_t	last_flags;	/* Last flags set */
 };
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index 9f00da2..49d321f 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -55,8 +55,7 @@
 #include <linux/capability.h>
 #include <net/netlink.h>
 
-struct nfnl_callback
-{
+struct nfnl_callback {
 	int (*call)(struct sock *nl, struct sk_buff *skb, 
 		    const struct nlmsghdr *nlh,
 		    const struct nlattr * const cda[]);
@@ -64,8 +63,7 @@
 	const u_int16_t attr_count;		/* number of nlattr's */
 };
 
-struct nfnetlink_subsystem
-{
+struct nfnetlink_subsystem {
 	const char *name;
 	__u8 subsys_id;			/* nfnetlink subsystem ID */
 	__u8 cb_count;			/* number of callbacks */
diff --git a/include/linux/netfilter/nfnetlink_compat.h b/include/linux/netfilter/nfnetlink_compat.h
index eda55ca..ffb9503 100644
--- a/include/linux/netfilter/nfnetlink_compat.h
+++ b/include/linux/netfilter/nfnetlink_compat.h
@@ -21,8 +21,7 @@
  * ! nfnetlink use the same attributes methods. - J. Schulist.
  */
 
-struct nfattr
-{
+struct nfattr {
 	__u16 nfa_len;
 	__u16 nfa_type;	/* we use 15 bits for the type, and the highest
 				 * bit to indicate whether the payload is nested */
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 812cb15..378f27a 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -6,8 +6,7 @@
 #define XT_FUNCTION_MAXNAMELEN 30
 #define XT_TABLE_MAXNAMELEN 32
 
-struct xt_entry_match
-{
+struct xt_entry_match {
 	union {
 		struct {
 			__u16 match_size;
@@ -31,8 +30,7 @@
 	unsigned char data[0];
 };
 
-struct xt_entry_target
-{
+struct xt_entry_target {
 	union {
 		struct {
 			__u16 target_size;
@@ -64,16 +62,14 @@
 	},								       \
 }
 
-struct xt_standard_target
-{
+struct xt_standard_target {
 	struct xt_entry_target target;
 	int verdict;
 };
 
 /* The argument to IPT_SO_GET_REVISION_*.  Returns highest revision
  * kernel supports, if >= revision. */
-struct xt_get_revision
-{
+struct xt_get_revision {
 	char name[XT_FUNCTION_MAXNAMELEN-1];
 
 	__u8 revision;
@@ -90,8 +86,7 @@
  * ip6t_entry and arpt_entry.  This sucks, and it is a hack.  It will be my
  * personal pleasure to remove it -HW
  */
-struct _xt_align
-{
+struct _xt_align {
 	__u8 u8;
 	__u16 u16;
 	__u32 u32;
@@ -109,14 +104,12 @@
 #define SET_COUNTER(c,b,p) do { (c).bcnt = (b); (c).pcnt = (p); } while(0)
 #define ADD_COUNTER(c,b,p) do { (c).bcnt += (b); (c).pcnt += (p); } while(0)
 
-struct xt_counters
-{
+struct xt_counters {
 	__u64 pcnt, bcnt;			/* Packet and byte counters */
 };
 
 /* The argument to IPT_SO_ADD_COUNTERS. */
-struct xt_counters_info
-{
+struct xt_counters_info {
 	/* Which table. */
 	char name[XT_TABLE_MAXNAMELEN];
 
@@ -269,8 +262,7 @@
 	u_int8_t family;
 };
 
-struct xt_match
-{
+struct xt_match {
 	struct list_head list;
 
 	const char name[XT_FUNCTION_MAXNAMELEN-1];
@@ -310,8 +302,7 @@
 };
 
 /* Registration hooks for targets. */
-struct xt_target
-{
+struct xt_target {
 	struct list_head list;
 
 	const char name[XT_FUNCTION_MAXNAMELEN-1];
@@ -349,8 +340,7 @@
 };
 
 /* Furniture shopping... */
-struct xt_table
-{
+struct xt_table {
 	struct list_head list;
 
 	/* What hooks you will enter on */
@@ -371,8 +361,7 @@
 #include <linux/netfilter_ipv4.h>
 
 /* The table itself */
-struct xt_table_info
-{
+struct xt_table_info {
 	/* Size per table */
 	unsigned int size;
 	/* Number of entries: FIXME. --RR */
@@ -528,8 +517,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_xt_entry_match
-{
+struct compat_xt_entry_match {
 	union {
 		struct {
 			u_int16_t match_size;
@@ -545,8 +533,7 @@
 	unsigned char data[0];
 };
 
-struct compat_xt_entry_target
-{
+struct compat_xt_entry_target {
 	union {
 		struct {
 			u_int16_t target_size;
@@ -566,8 +553,7 @@
  * need to change whole approach in order to calculate align as function of
  * current task alignment */
 
-struct compat_xt_counters
-{
+struct compat_xt_counters {
 #if defined(CONFIG_X86_64) || defined(CONFIG_IA64)
 	u_int32_t cnt[4];
 #else
@@ -575,8 +561,7 @@
 #endif
 };
 
-struct compat_xt_counters_info
-{
+struct compat_xt_counters_info {
 	char name[XT_TABLE_MAXNAMELEN];
 	compat_uint_t num_counters;
 	struct compat_xt_counters counters[0];
diff --git a/include/linux/netfilter/xt_connbytes.h b/include/linux/netfilter/xt_connbytes.h
index 52bd615..92fcbb0 100644
--- a/include/linux/netfilter/xt_connbytes.h
+++ b/include/linux/netfilter/xt_connbytes.h
@@ -15,8 +15,7 @@
 	XT_CONNBYTES_DIR_BOTH,
 };
 
-struct xt_connbytes_info
-{
+struct xt_connbytes_info {
 	struct {
 		aligned_u64 from;	/* count to be matched */
 		aligned_u64 to;		/* count to be matched */
diff --git a/include/linux/netfilter/xt_esp.h b/include/linux/netfilter/xt_esp.h
index ef6fa47..ee68824 100644
--- a/include/linux/netfilter/xt_esp.h
+++ b/include/linux/netfilter/xt_esp.h
@@ -3,8 +3,7 @@
 
 #include <linux/types.h>
 
-struct xt_esp
-{
+struct xt_esp {
 	__u32 spis[2];	/* Security Parameter Index */
 	__u8  invflags;	/* Inverse flags */
 };
diff --git a/include/linux/netfilter/xt_multiport.h b/include/linux/netfilter/xt_multiport.h
index 185db49..5b7e72d 100644
--- a/include/linux/netfilter/xt_multiport.h
+++ b/include/linux/netfilter/xt_multiport.h
@@ -3,8 +3,7 @@
 
 #include <linux/types.h>
 
-enum xt_multiport_flags
-{
+enum xt_multiport_flags {
 	XT_MULTIPORT_SOURCE,
 	XT_MULTIPORT_DESTINATION,
 	XT_MULTIPORT_EITHER
@@ -13,15 +12,13 @@
 #define XT_MULTI_PORTS	15
 
 /* Must fit inside union xt_matchinfo: 16 bytes */
-struct xt_multiport
-{
+struct xt_multiport {
 	__u8 flags;				/* Type of comparison */
 	__u8 count;				/* Number of ports */
 	__u16 ports[XT_MULTI_PORTS];	/* Ports */
 };
 
-struct xt_multiport_v1
-{
+struct xt_multiport_v1 {
 	__u8 flags;				/* Type of comparison */
 	__u8 count;				/* Number of ports */
 	__u16 ports[XT_MULTI_PORTS];	/* Ports */
diff --git a/include/linux/netfilter/xt_policy.h b/include/linux/netfilter/xt_policy.h
index 7bb64e7..be8ead0 100644
--- a/include/linux/netfilter/xt_policy.h
+++ b/include/linux/netfilter/xt_policy.h
@@ -5,22 +5,19 @@
 
 #define XT_POLICY_MAX_ELEM	4
 
-enum xt_policy_flags
-{
+enum xt_policy_flags {
 	XT_POLICY_MATCH_IN	= 0x1,
 	XT_POLICY_MATCH_OUT	= 0x2,
 	XT_POLICY_MATCH_NONE	= 0x4,
 	XT_POLICY_MATCH_STRICT	= 0x8,
 };
 
-enum xt_policy_modes
-{
+enum xt_policy_modes {
 	XT_POLICY_MODE_TRANSPORT,
 	XT_POLICY_MODE_TUNNEL
 };
 
-struct xt_policy_spec
-{
+struct xt_policy_spec {
 	__u8	saddr:1,
 			daddr:1,
 			proto:1,
@@ -30,15 +27,13 @@
 };
 
 #ifndef __KERNEL__
-union xt_policy_addr
-{
+union xt_policy_addr {
 	struct in_addr	a4;
 	struct in6_addr	a6;
 };
 #endif
 
-struct xt_policy_elem
-{
+struct xt_policy_elem {
 	union {
 #ifdef __KERNEL__
 		struct {
@@ -65,8 +60,7 @@
 	struct xt_policy_spec	invert;
 };
 
-struct xt_policy_info
-{
+struct xt_policy_info {
 	struct xt_policy_elem pol[XT_POLICY_MAX_ELEM];
 	__u16 flags;
 	__u16 len;
diff --git a/include/linux/netfilter/xt_state.h b/include/linux/netfilter/xt_state.h
index c06f32e..7b32de8 100644
--- a/include/linux/netfilter/xt_state.h
+++ b/include/linux/netfilter/xt_state.h
@@ -6,8 +6,7 @@
 
 #define XT_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 1))
 
-struct xt_state_info
-{
+struct xt_state_info {
 	unsigned int statemask;
 };
 #endif /*_XT_STATE_H*/
diff --git a/include/linux/netfilter/xt_string.h b/include/linux/netfilter/xt_string.h
index ecbb95f..235347c 100644
--- a/include/linux/netfilter/xt_string.h
+++ b/include/linux/netfilter/xt_string.h
@@ -11,8 +11,7 @@
 	XT_STRING_FLAG_IGNORECASE	= 0x02
 };
 
-struct xt_string_info
-{
+struct xt_string_info {
 	__u16 from_offset;
 	__u16 to_offset;
 	char	  algo[XT_STRING_MAX_ALGO_NAME_SIZE];
diff --git a/include/linux/netfilter/xt_tcpudp.h b/include/linux/netfilter/xt_tcpudp.h
index a490a0b..38aa7b3 100644
--- a/include/linux/netfilter/xt_tcpudp.h
+++ b/include/linux/netfilter/xt_tcpudp.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 
 /* TCP matching stuff */
-struct xt_tcp
-{
+struct xt_tcp {
 	__u16 spts[2];			/* Source port range. */
 	__u16 dpts[2];			/* Destination port range. */
 	__u8 option;			/* TCP Option iff non-zero*/
@@ -22,8 +21,7 @@
 #define XT_TCP_INV_MASK		0x0F	/* All possible flags. */
 
 /* UDP matching stuff */
-struct xt_udp
-{
+struct xt_udp {
 	__u16 spts[2];			/* Source port range. */
 	__u16 dpts[2];			/* Destination port range. */
 	__u8 invflags;			/* Inverse flags */
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index 6fe3e6a..f233652 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -132,8 +132,7 @@
 #define ARPT_RETURN XT_RETURN
 
 /* The argument to ARPT_SO_GET_INFO */
-struct arpt_getinfo
-{
+struct arpt_getinfo {
 	/* Which table: caller fills this in. */
 	char name[ARPT_TABLE_MAXNAMELEN];
 
@@ -155,8 +154,7 @@
 };
 
 /* The argument to ARPT_SO_SET_REPLACE. */
-struct arpt_replace
-{
+struct arpt_replace {
 	/* Which table. */
 	char name[ARPT_TABLE_MAXNAMELEN];
 
@@ -191,8 +189,7 @@
 #define arpt_counters xt_counters
 
 /* The argument to ARPT_SO_GET_ENTRIES. */
-struct arpt_get_entries
-{
+struct arpt_get_entries {
 	/* Which table: user fills this in. */
 	char name[ARPT_TABLE_MAXNAMELEN];
 
@@ -224,20 +221,17 @@
 #ifdef __KERNEL__
 
 /* Standard entry. */
-struct arpt_standard
-{
+struct arpt_standard {
 	struct arpt_entry entry;
 	struct arpt_standard_target target;
 };
 
-struct arpt_error_target
-{
+struct arpt_error_target {
 	struct arpt_entry_target target;
 	char errorname[ARPT_FUNCTION_MAXNAMELEN];
 };
 
-struct arpt_error
-{
+struct arpt_error {
 	struct arpt_entry entry;
 	struct arpt_error_target target;
 };
@@ -279,8 +273,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_arpt_entry
-{
+struct compat_arpt_entry {
 	struct arpt_arp arp;
 	u_int16_t target_offset;
 	u_int16_t next_offset;
diff --git a/include/linux/netfilter_bridge/ebt_802_3.h b/include/linux/netfilter_bridge/ebt_802_3.h
index a11b0c2..c73ef0b 100644
--- a/include/linux/netfilter_bridge/ebt_802_3.h
+++ b/include/linux/netfilter_bridge/ebt_802_3.h
@@ -58,8 +58,7 @@
 }
 #endif
 
-struct ebt_802_3_info 
-{
+struct ebt_802_3_info {
 	uint8_t  sap;
 	__be16 type;
 	uint8_t  bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_among.h b/include/linux/netfilter_bridge/ebt_among.h
index 7654069..0009558 100644
--- a/include/linux/netfilter_bridge/ebt_among.h
+++ b/include/linux/netfilter_bridge/ebt_among.h
@@ -29,14 +29,12 @@
  * Yes, it is a memory overhead, but in 2003 AD, who cares?
  */
 
-struct ebt_mac_wormhash_tuple
-{
+struct ebt_mac_wormhash_tuple {
 	uint32_t cmp[2];
 	__be32 ip;
 };
 
-struct ebt_mac_wormhash
-{
+struct ebt_mac_wormhash {
 	int table[257];
 	int poolsize;
 	struct ebt_mac_wormhash_tuple pool[0];
@@ -45,8 +43,7 @@
 #define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \
 		+ (x)->poolsize * sizeof(struct ebt_mac_wormhash_tuple) : 0)
 
-struct ebt_among_info
-{
+struct ebt_among_info {
 	int wh_dst_ofs;
 	int wh_src_ofs;
 	int bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_arpreply.h b/include/linux/netfilter_bridge/ebt_arpreply.h
index 96a8339..7e77896 100644
--- a/include/linux/netfilter_bridge/ebt_arpreply.h
+++ b/include/linux/netfilter_bridge/ebt_arpreply.h
@@ -1,8 +1,7 @@
 #ifndef __LINUX_BRIDGE_EBT_ARPREPLY_H
 #define __LINUX_BRIDGE_EBT_ARPREPLY_H
 
-struct ebt_arpreply_info
-{
+struct ebt_arpreply_info {
 	unsigned char mac[ETH_ALEN];
 	int target;
 };
diff --git a/include/linux/netfilter_bridge/ebt_ip.h b/include/linux/netfilter_bridge/ebt_ip.h
index d684747..6a708fb 100644
--- a/include/linux/netfilter_bridge/ebt_ip.h
+++ b/include/linux/netfilter_bridge/ebt_ip.h
@@ -26,8 +26,7 @@
 #define EBT_IP_MATCH "ip"
 
 /* the same values are used for the invflags */
-struct ebt_ip_info
-{
+struct ebt_ip_info {
 	__be32 saddr;
 	__be32 daddr;
 	__be32 smsk;
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
index 2273c3a..e5de987 100644
--- a/include/linux/netfilter_bridge/ebt_ip6.h
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -23,8 +23,7 @@
 #define EBT_IP6_MATCH "ip6"
 
 /* the same values are used for the invflags */
-struct ebt_ip6_info
-{
+struct ebt_ip6_info {
 	struct in6_addr saddr;
 	struct in6_addr daddr;
 	struct in6_addr smsk;
diff --git a/include/linux/netfilter_bridge/ebt_limit.h b/include/linux/netfilter_bridge/ebt_limit.h
index d8b6500..4bf76b7 100644
--- a/include/linux/netfilter_bridge/ebt_limit.h
+++ b/include/linux/netfilter_bridge/ebt_limit.h
@@ -9,8 +9,7 @@
 /* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
    seconds, or one every 59 hours. */
 
-struct ebt_limit_info
-{
+struct ebt_limit_info {
 	u_int32_t avg;    /* Average secs between packets * scale */
 	u_int32_t burst;  /* Period multiplier for upper limit. */
 
diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h
index b76e653..cc2cdfb 100644
--- a/include/linux/netfilter_bridge/ebt_log.h
+++ b/include/linux/netfilter_bridge/ebt_log.h
@@ -9,8 +9,7 @@
 #define EBT_LOG_PREFIX_SIZE 30
 #define EBT_LOG_WATCHER "log"
 
-struct ebt_log_info
-{
+struct ebt_log_info {
 	uint8_t loglevel;
 	uint8_t prefix[EBT_LOG_PREFIX_SIZE];
 	uint32_t bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_mark_m.h b/include/linux/netfilter_bridge/ebt_mark_m.h
index 301524f..9ceb10e 100644
--- a/include/linux/netfilter_bridge/ebt_mark_m.h
+++ b/include/linux/netfilter_bridge/ebt_mark_m.h
@@ -4,8 +4,7 @@
 #define EBT_MARK_AND 0x01
 #define EBT_MARK_OR 0x02
 #define EBT_MARK_MASK (EBT_MARK_AND | EBT_MARK_OR)
-struct ebt_mark_m_info
-{
+struct ebt_mark_m_info {
 	unsigned long mark, mask;
 	uint8_t invert;
 	uint8_t bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_mark_t.h b/include/linux/netfilter_bridge/ebt_mark_t.h
index 6270f6f..7d5a268 100644
--- a/include/linux/netfilter_bridge/ebt_mark_t.h
+++ b/include/linux/netfilter_bridge/ebt_mark_t.h
@@ -13,8 +13,7 @@
 #define MARK_AND_VALUE (0xffffffd0)
 #define MARK_XOR_VALUE (0xffffffc0)
 
-struct ebt_mark_t_info
-{
+struct ebt_mark_t_info {
 	unsigned long mark;
 	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
 	int target;
diff --git a/include/linux/netfilter_bridge/ebt_nat.h b/include/linux/netfilter_bridge/ebt_nat.h
index 435b886..5e74e3b 100644
--- a/include/linux/netfilter_bridge/ebt_nat.h
+++ b/include/linux/netfilter_bridge/ebt_nat.h
@@ -2,8 +2,7 @@
 #define __LINUX_BRIDGE_EBT_NAT_H
 
 #define NAT_ARP_BIT  (0x00000010)
-struct ebt_nat_info
-{
+struct ebt_nat_info {
 	unsigned char mac[ETH_ALEN];
 	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
 	int target;
diff --git a/include/linux/netfilter_bridge/ebt_pkttype.h b/include/linux/netfilter_bridge/ebt_pkttype.h
index 0d64bbb..51a7998 100644
--- a/include/linux/netfilter_bridge/ebt_pkttype.h
+++ b/include/linux/netfilter_bridge/ebt_pkttype.h
@@ -1,8 +1,7 @@
 #ifndef __LINUX_BRIDGE_EBT_PKTTYPE_H
 #define __LINUX_BRIDGE_EBT_PKTTYPE_H
 
-struct ebt_pkttype_info
-{
+struct ebt_pkttype_info {
 	uint8_t pkt_type;
 	uint8_t invert;
 };
diff --git a/include/linux/netfilter_bridge/ebt_redirect.h b/include/linux/netfilter_bridge/ebt_redirect.h
index 5c67990..dd9622c 100644
--- a/include/linux/netfilter_bridge/ebt_redirect.h
+++ b/include/linux/netfilter_bridge/ebt_redirect.h
@@ -1,8 +1,7 @@
 #ifndef __LINUX_BRIDGE_EBT_REDIRECT_H
 #define __LINUX_BRIDGE_EBT_REDIRECT_H
 
-struct ebt_redirect_info
-{
+struct ebt_redirect_info {
 	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
 	int target;
 };
diff --git a/include/linux/netfilter_bridge/ebt_stp.h b/include/linux/netfilter_bridge/ebt_stp.h
index e5fd678..e503a0a 100644
--- a/include/linux/netfilter_bridge/ebt_stp.h
+++ b/include/linux/netfilter_bridge/ebt_stp.h
@@ -20,8 +20,7 @@
 
 #define EBT_STP_MATCH "stp"
 
-struct ebt_stp_config_info
-{
+struct ebt_stp_config_info {
 	uint8_t flags;
 	uint16_t root_priol, root_priou;
 	char root_addr[6], root_addrmsk[6];
@@ -35,8 +34,7 @@
 	uint16_t forward_delayl, forward_delayu;
 };
 
-struct ebt_stp_info
-{
+struct ebt_stp_info {
 	uint8_t type;
 	struct ebt_stp_config_info config;
 	uint16_t bitmask;
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index ea281e6..3cc40c1 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -34,14 +34,12 @@
 struct xt_match;
 struct xt_target;
 
-struct ebt_counter
-{
+struct ebt_counter {
 	uint64_t pcnt;
 	uint64_t bcnt;
 };
 
-struct ebt_replace
-{
+struct ebt_replace {
 	char name[EBT_TABLE_MAXNAMELEN];
 	unsigned int valid_hooks;
 	/* nr of rules in the table */
@@ -57,8 +55,7 @@
 	char __user *entries;
 };
 
-struct ebt_replace_kernel
-{
+struct ebt_replace_kernel {
 	char name[EBT_TABLE_MAXNAMELEN];
 	unsigned int valid_hooks;
 	/* nr of rules in the table */
@@ -120,8 +117,7 @@
 #define EBT_INV_MASK (EBT_IPROTO | EBT_IIN | EBT_IOUT | EBT_ILOGICALIN \
    | EBT_ILOGICALOUT | EBT_ISOURCE | EBT_IDEST)
 
-struct ebt_entry_match
-{
+struct ebt_entry_match {
 	union {
 		char name[EBT_FUNCTION_MAXNAMELEN];
 		struct xt_match *match;
@@ -131,8 +127,7 @@
 	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
 };
 
-struct ebt_entry_watcher
-{
+struct ebt_entry_watcher {
 	union {
 		char name[EBT_FUNCTION_MAXNAMELEN];
 		struct xt_target *watcher;
@@ -142,8 +137,7 @@
 	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
 };
 
-struct ebt_entry_target
-{
+struct ebt_entry_target {
 	union {
 		char name[EBT_FUNCTION_MAXNAMELEN];
 		struct xt_target *target;
@@ -154,8 +148,7 @@
 };
 
 #define EBT_STANDARD_TARGET "standard"
-struct ebt_standard_target
-{
+struct ebt_standard_target {
 	struct ebt_entry_target target;
 	int verdict;
 };
@@ -206,8 +199,7 @@
 #define EBT_MATCH 0
 #define EBT_NOMATCH 1
 
-struct ebt_match
-{
+struct ebt_match {
 	struct list_head list;
 	const char name[EBT_FUNCTION_MAXNAMELEN];
 	bool (*match)(const struct sk_buff *skb, const struct net_device *in,
@@ -224,8 +216,7 @@
 	struct module *me;
 };
 
-struct ebt_watcher
-{
+struct ebt_watcher {
 	struct list_head list;
 	const char name[EBT_FUNCTION_MAXNAMELEN];
 	unsigned int (*target)(struct sk_buff *skb,
@@ -242,8 +233,7 @@
 	struct module *me;
 };
 
-struct ebt_target
-{
+struct ebt_target {
 	struct list_head list;
 	const char name[EBT_FUNCTION_MAXNAMELEN];
 	/* returns one of the standard EBT_* verdicts */
@@ -262,15 +252,13 @@
 };
 
 /* used for jumping from and into user defined chains (udc) */
-struct ebt_chainstack
-{
+struct ebt_chainstack {
 	struct ebt_entries *chaininfo; /* pointer to chain data */
 	struct ebt_entry *e; /* pointer to entry data */
 	unsigned int n; /* n'th entry */
 };
 
-struct ebt_table_info
-{
+struct ebt_table_info {
 	/* total size of the entries */
 	unsigned int entries_size;
 	unsigned int nentries;
@@ -282,8 +270,7 @@
 	struct ebt_counter counters[0] ____cacheline_aligned;
 };
 
-struct ebt_table
-{
+struct ebt_table {
 	struct list_head list;
 	char name[EBT_TABLE_MAXNAMELEN];
 	struct ebt_replace_kernel *table;
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index 61fafc8..27b3f58 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -76,8 +76,7 @@
 /* This structure defines each of the firewall rules.  Consists of 3
    parts which are 1) general IP header stuff 2) match specific
    stuff 3) the target to perform if the rule matches */
-struct ipt_entry
-{
+struct ipt_entry {
 	struct ipt_ip ip;
 
 	/* Mark with fields that we care about. */
@@ -135,8 +134,7 @@
 #define IPT_UDP_INV_MASK	XT_UDP_INV_MASK
 
 /* ICMP matching stuff */
-struct ipt_icmp
-{
+struct ipt_icmp {
 	u_int8_t type;				/* type to match */
 	u_int8_t code[2];			/* range of code */
 	u_int8_t invflags;			/* Inverse flags */
@@ -146,8 +144,7 @@
 #define IPT_ICMP_INV	0x01	/* Invert the sense of type/code test */
 
 /* The argument to IPT_SO_GET_INFO */
-struct ipt_getinfo
-{
+struct ipt_getinfo {
 	/* Which table: caller fills this in. */
 	char name[IPT_TABLE_MAXNAMELEN];
 
@@ -169,8 +166,7 @@
 };
 
 /* The argument to IPT_SO_SET_REPLACE. */
-struct ipt_replace
-{
+struct ipt_replace {
 	/* Which table. */
 	char name[IPT_TABLE_MAXNAMELEN];
 
@@ -204,8 +200,7 @@
 #define ipt_counters_info xt_counters_info
 
 /* The argument to IPT_SO_GET_ENTRIES. */
-struct ipt_get_entries
-{
+struct ipt_get_entries {
 	/* Which table: user fills this in. */
 	char name[IPT_TABLE_MAXNAMELEN];
 
@@ -250,20 +245,17 @@
 extern void ipt_unregister_table(struct xt_table *table);
 
 /* Standard entry. */
-struct ipt_standard
-{
+struct ipt_standard {
 	struct ipt_entry entry;
 	struct ipt_standard_target target;
 };
 
-struct ipt_error_target
-{
+struct ipt_error_target {
 	struct ipt_entry_target target;
 	char errorname[IPT_FUNCTION_MAXNAMELEN];
 };
 
-struct ipt_error
-{
+struct ipt_error {
 	struct ipt_entry entry;
 	struct ipt_error_target target;
 };
@@ -301,8 +293,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_ipt_entry
-{
+struct compat_ipt_entry {
 	struct ipt_ip ip;
 	compat_uint_t nfcache;
 	u_int16_t target_offset;
diff --git a/include/linux/netfilter_ipv4/ipt_SAME.h b/include/linux/netfilter_ipv4/ipt_SAME.h
index be6e682..2529660 100644
--- a/include/linux/netfilter_ipv4/ipt_SAME.h
+++ b/include/linux/netfilter_ipv4/ipt_SAME.h
@@ -5,8 +5,7 @@
 
 #define IPT_SAME_NODST		0x01
 
-struct ipt_same_info
-{
+struct ipt_same_info {
 	unsigned char info;
 	u_int32_t rangesize;
 	u_int32_t ipnum;
diff --git a/include/linux/netfilter_ipv4/ipt_ah.h b/include/linux/netfilter_ipv4/ipt_ah.h
index 7b9a2ac..2e555b4 100644
--- a/include/linux/netfilter_ipv4/ipt_ah.h
+++ b/include/linux/netfilter_ipv4/ipt_ah.h
@@ -1,8 +1,7 @@
 #ifndef _IPT_AH_H
 #define _IPT_AH_H
 
-struct ipt_ah
-{
+struct ipt_ah {
 	u_int32_t spis[2];			/* Security Parameter Index */
 	u_int8_t  invflags;			/* Inverse flags */
 };
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index a64e145..b31050d 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -88,8 +88,7 @@
 /* This structure defines each of the firewall rules.  Consists of 3
    parts which are 1) general IP header stuff 2) match specific
    stuff 3) the target to perform if the rule matches */
-struct ip6t_entry
-{
+struct ip6t_entry {
 	struct ip6t_ip6 ipv6;
 
 	/* Mark with fields that we care about. */
@@ -111,20 +110,17 @@
 };
 
 /* Standard entry */
-struct ip6t_standard
-{
+struct ip6t_standard {
 	struct ip6t_entry entry;
 	struct ip6t_standard_target target;
 };
 
-struct ip6t_error_target
-{
+struct ip6t_error_target {
 	struct ip6t_entry_target target;
 	char errorname[IP6T_FUNCTION_MAXNAMELEN];
 };
 
-struct ip6t_error
-{
+struct ip6t_error {
 	struct ip6t_entry entry;
 	struct ip6t_error_target target;
 };
@@ -195,8 +191,7 @@
 #define IP6T_UDP_INV_MASK	XT_UDP_INV_MASK
 
 /* ICMP matching stuff */
-struct ip6t_icmp
-{
+struct ip6t_icmp {
 	u_int8_t type;				/* type to match */
 	u_int8_t code[2];			/* range of code */
 	u_int8_t invflags;			/* Inverse flags */
@@ -206,8 +201,7 @@
 #define IP6T_ICMP_INV	0x01	/* Invert the sense of type/code test */
 
 /* The argument to IP6T_SO_GET_INFO */
-struct ip6t_getinfo
-{
+struct ip6t_getinfo {
 	/* Which table: caller fills this in. */
 	char name[IP6T_TABLE_MAXNAMELEN];
 
@@ -229,8 +223,7 @@
 };
 
 /* The argument to IP6T_SO_SET_REPLACE. */
-struct ip6t_replace
-{
+struct ip6t_replace {
 	/* Which table. */
 	char name[IP6T_TABLE_MAXNAMELEN];
 
@@ -264,8 +257,7 @@
 #define ip6t_counters_info xt_counters_info
 
 /* The argument to IP6T_SO_GET_ENTRIES. */
-struct ip6t_get_entries
-{
+struct ip6t_get_entries {
 	/* Which table: user fills this in. */
 	char name[IP6T_TABLE_MAXNAMELEN];
 
@@ -330,8 +322,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_ip6t_entry
-{
+struct compat_ip6t_entry {
 	struct ip6t_ip6 ipv6;
 	compat_uint_t nfcache;
 	u_int16_t target_offset;
diff --git a/include/linux/netfilter_ipv6/ip6t_ah.h b/include/linux/netfilter_ipv6/ip6t_ah.h
index 8531879..17a745c 100644
--- a/include/linux/netfilter_ipv6/ip6t_ah.h
+++ b/include/linux/netfilter_ipv6/ip6t_ah.h
@@ -1,8 +1,7 @@
 #ifndef _IP6T_AH_H
 #define _IP6T_AH_H
 
-struct ip6t_ah
-{
+struct ip6t_ah {
 	u_int32_t spis[2];			/* Security Parameter Index */
 	u_int32_t hdrlen;			/* Header Length */
 	u_int8_t  hdrres;			/* Test of the Reserved Filed */
diff --git a/include/linux/netfilter_ipv6/ip6t_frag.h b/include/linux/netfilter_ipv6/ip6t_frag.h
index 66070a0..3724d08 100644
--- a/include/linux/netfilter_ipv6/ip6t_frag.h
+++ b/include/linux/netfilter_ipv6/ip6t_frag.h
@@ -1,8 +1,7 @@
 #ifndef _IP6T_FRAG_H
 #define _IP6T_FRAG_H
 
-struct ip6t_frag
-{
+struct ip6t_frag {
 	u_int32_t ids[2];			/* Security Parameter Index */
 	u_int32_t hdrlen;			/* Header Length */
 	u_int8_t  flags;			/*  */
diff --git a/include/linux/netfilter_ipv6/ip6t_ipv6header.h b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
index 51c53fc..01dfd44 100644
--- a/include/linux/netfilter_ipv6/ip6t_ipv6header.h
+++ b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
@@ -8,8 +8,7 @@
 #ifndef __IPV6HEADER_H
 #define __IPV6HEADER_H
 
-struct ip6t_ipv6header_info
-{
+struct ip6t_ipv6header_info {
 	u_int8_t matchflags;
 	u_int8_t invflags;
 	u_int8_t modeflag;
diff --git a/include/linux/netfilter_ipv6/ip6t_mh.h b/include/linux/netfilter_ipv6/ip6t_mh.h
index b9ca9a5..18549bc 100644
--- a/include/linux/netfilter_ipv6/ip6t_mh.h
+++ b/include/linux/netfilter_ipv6/ip6t_mh.h
@@ -2,8 +2,7 @@
 #define _IP6T_MH_H
 
 /* MH matching stuff */
-struct ip6t_mh
-{
+struct ip6t_mh {
 	u_int8_t types[2];	/* MH type range */
 	u_int8_t invflags;	/* Inverse flags */
 };
diff --git a/include/linux/netfilter_ipv6/ip6t_opts.h b/include/linux/netfilter_ipv6/ip6t_opts.h
index a07e363..62d89bc 100644
--- a/include/linux/netfilter_ipv6/ip6t_opts.h
+++ b/include/linux/netfilter_ipv6/ip6t_opts.h
@@ -3,8 +3,7 @@
 
 #define IP6T_OPTS_OPTSNR 16
 
-struct ip6t_opts
-{
+struct ip6t_opts {
 	u_int32_t hdrlen;			/* Header Length */
 	u_int8_t flags;				/*  */
 	u_int8_t invflags;			/* Inverse flags */
diff --git a/include/linux/netfilter_ipv6/ip6t_rt.h b/include/linux/netfilter_ipv6/ip6t_rt.h
index 5215602..ab91bfd 100644
--- a/include/linux/netfilter_ipv6/ip6t_rt.h
+++ b/include/linux/netfilter_ipv6/ip6t_rt.h
@@ -5,8 +5,7 @@
 
 #define IP6T_RT_HOPS 16
 
-struct ip6t_rt
-{
+struct ip6t_rt {
 	u_int32_t rt_type;			/* Routing Type */
 	u_int32_t segsleft[2];			/* Segments Left */
 	u_int32_t hdrlen;			/* Header Length */
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index ab5d312..fde27c0 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -29,16 +29,14 @@
 
 struct net;
 
-struct sockaddr_nl
-{
+struct sockaddr_nl {
 	sa_family_t	nl_family;	/* AF_NETLINK	*/
 	unsigned short	nl_pad;		/* zero		*/
 	__u32		nl_pid;		/* port ID	*/
        	__u32		nl_groups;	/* multicast groups mask */
 };
 
-struct nlmsghdr
-{
+struct nlmsghdr {
 	__u32		nlmsg_len;	/* Length of message including header */
 	__u16		nlmsg_type;	/* Message content */
 	__u16		nlmsg_flags;	/* Additional flags */
@@ -94,8 +92,7 @@
 
 #define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
 
-struct nlmsgerr
-{
+struct nlmsgerr {
 	int		error;
 	struct nlmsghdr msg;
 };
@@ -106,8 +103,7 @@
 #define NETLINK_BROADCAST_ERROR	4
 #define NETLINK_NO_ENOBUFS	5
 
-struct nl_pktinfo
-{
+struct nl_pktinfo {
 	__u32	group;
 };
 
@@ -127,8 +123,7 @@
  *  <-------------- nlattr->nla_len -------------->
  */
 
-struct nlattr
-{
+struct nlattr {
 	__u16           nla_len;
 	__u16           nla_type;
 };
@@ -161,8 +156,7 @@
 	return (struct nlmsghdr *)skb->data;
 }
 
-struct netlink_skb_parms
-{
+struct netlink_skb_parms {
 	struct ucred		creds;		/* Skb credentials	*/
 	__u32			pid;
 	__u32			dst_group;
@@ -220,8 +214,7 @@
 #define NLMSG_DEFAULT_SIZE (NLMSG_GOODSIZE - NLMSG_HDRLEN)
 
 
-struct netlink_callback
-{
+struct netlink_callback {
 	struct sk_buff		*skb;
 	const struct nlmsghdr	*nlh;
 	int			(*dump)(struct sk_buff * skb,
@@ -231,8 +224,7 @@
 	long			args[6];
 };
 
-struct netlink_notify
-{
+struct netlink_notify {
 	struct net *net;
 	int pid;
 	int protocol;
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index a8d71ed..da8ea2e 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -160,6 +160,11 @@
  * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
  *	partial scan results may be available
  *
+ * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ *      or noise level
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
  * 	has been changed and provides details of the request information
  * 	that caused the change such as who initiated the regulatory request
@@ -341,6 +346,13 @@
 
 	NL80211_CMD_SET_WIPHY_NETNS,
 
+	NL80211_CMD_GET_SURVEY,
+	NL80211_CMD_NEW_SURVEY_RESULTS,
+
+	NL80211_CMD_SET_PMKSA,
+	NL80211_CMD_DEL_PMKSA,
+	NL80211_CMD_FLUSH_PMKSA,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -584,6 +596,16 @@
  *	changed then the list changed and the dump should be repeated
  *	completely from scratch.
  *
+ * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface
+ *
+ * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of
+ *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
+ *      containing info as possible, see &enum survey_info.
+ *
+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
+ *	cache, a wiphy attribute.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -714,6 +736,13 @@
 
 	NL80211_ATTR_PID,
 
+	NL80211_ATTR_4ADDR,
+
+	NL80211_ATTR_SURVEY_INFO,
+
+	NL80211_ATTR_PMKID,
+	NL80211_ATTR_MAX_NUM_PMKIDS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -895,14 +924,14 @@
  *
  * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
  * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running
- * @NL80211_MPATH_FLAG_DSN_VALID: the mesh path contains a valid DSN
+ * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN
  * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set
  * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded
  */
 enum nl80211_mpath_flags {
 	NL80211_MPATH_FLAG_ACTIVE =	1<<0,
 	NL80211_MPATH_FLAG_RESOLVING =	1<<1,
-	NL80211_MPATH_FLAG_DSN_VALID =	1<<2,
+	NL80211_MPATH_FLAG_SN_VALID =	1<<2,
 	NL80211_MPATH_FLAG_FIXED =	1<<3,
 	NL80211_MPATH_FLAG_RESOLVED =	1<<4,
 };
@@ -915,7 +944,7 @@
  *
  * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved
  * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination
- * @NL80211_ATTR_MPATH_DSN: destination sequence number
+ * @NL80211_ATTR_MPATH_SN: destination sequence number
  * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path
  * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now
  * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in
@@ -926,7 +955,7 @@
 enum nl80211_mpath_info {
 	__NL80211_MPATH_INFO_INVALID,
 	NL80211_MPATH_INFO_FRAME_QLEN,
-	NL80211_MPATH_INFO_DSN,
+	NL80211_MPATH_INFO_SN,
 	NL80211_MPATH_INFO_METRIC,
 	NL80211_MPATH_INFO_EXPTIME,
 	NL80211_MPATH_INFO_FLAGS,
@@ -1117,6 +1146,26 @@
 };
 
 /**
+ * enum nl80211_survey_info - survey information
+ *
+ * These attribute types are used with %NL80211_ATTR_SURVEY_INFO
+ * when getting information about a survey.
+ *
+ * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+ * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+ * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
+ */
+enum nl80211_survey_info {
+	__NL80211_SURVEY_INFO_INVALID,
+	NL80211_SURVEY_INFO_FREQUENCY,
+	NL80211_SURVEY_INFO_NOISE,
+
+	/* keep last */
+	__NL80211_SURVEY_INFO_AFTER_LAST,
+	NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_mntr_flags - monitor configuration flags
  *
  * Monitor configuration flags.
@@ -1196,6 +1245,8 @@
  * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs)
  * that it takes for an HWMP information element to propagate across the mesh
  *
+ * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
+ *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -1215,6 +1266,7 @@
 	NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
 	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
 	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
+	NL80211_MESHCONF_HWMP_ROOTMODE,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -1277,6 +1329,7 @@
  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
  *	in unspecified units, scaled to 0..100 (u8)
  * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -1291,6 +1344,7 @@
 	NL80211_BSS_SIGNAL_MBM,
 	NL80211_BSS_SIGNAL_UNSPEC,
 	NL80211_BSS_STATUS,
+	NL80211_BSS_SEEN_MS_AGO,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h
index b7d9435..33d9f51 100644
--- a/include/linux/nl802154.h
+++ b/include/linux/nl802154.h
@@ -65,6 +65,9 @@
 	IEEE802154_ATTR_SEC,
 
 	IEEE802154_ATTR_PAGE,
+	IEEE802154_ATTR_CHANNEL_PAGE_LIST,
+
+	IEEE802154_ATTR_PHY_NAME,
 
 	__IEEE802154_ATTR_MAX,
 };
@@ -114,6 +117,9 @@
 	IEEE802154_RX_ENABLE_CONF, /* Not supported yet */
 
 	IEEE802154_LIST_IFACE,
+	IEEE802154_LIST_PHY,
+	IEEE802154_ADD_IFACE,
+	IEEE802154_DEL_IFACE,
 
 	__IEEE802154_CMD_MAX,
 };
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 44428d2..fee6c2f 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -201,6 +201,8 @@
 #define NETDEV_PRE_UP		0x000D
 #define NETDEV_BONDING_OLDTYPE  0x000E
 #define NETDEV_BONDING_NEWTYPE  0x000F
+#define NETDEV_POST_INIT	0x0010
+#define NETDEV_UNREGISTER_BATCH 0x0011
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
diff --git a/include/linux/of.h b/include/linux/of.h
index 7be2d10..e7facd8 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -17,14 +17,117 @@
  */
 #include <linux/types.h>
 #include <linux/bitops.h>
+#include <linux/kref.h>
 #include <linux/mod_devicetable.h>
 
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+	unsigned long _flags;
+	unsigned int unique_id;
+};
+
+#if defined(CONFIG_SPARC)
+struct of_irq_controller;
+#endif
+
+struct device_node {
+	const char *name;
+	const char *type;
+	phandle	node;
+#if !defined(CONFIG_SPARC)
+	phandle linux_phandle;
+#endif
+	char	*full_name;
+
+	struct	property *properties;
+	struct	property *deadprops;	/* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct	proc_dir_entry *pde;	/* this node's proc directory */
+	struct	kref kref;
+	unsigned long _flags;
+	void	*data;
+#if defined(CONFIG_SPARC)
+	char	*path_component_name;
+	unsigned int unique_id;
+	struct of_irq_controller *irq_trans;
+#endif
+};
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+	return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+	set_bit(flag, &n->_flags);
+}
+
+static inline void
+set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+
+#if defined(CONFIG_SPARC)
+/* Dummy ref counting routines - to be implemented later */
+static inline struct device_node *of_node_get(struct device_node *node)
+{
+	return node;
+}
+static inline void of_node_put(struct device_node *node)
+{
+}
+
+#else
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+#endif
+
+/*
+ * OF address retreival & translation
+ */
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#ifdef CONFIG_PPC32
+static inline unsigned long of_read_ulong(const u32 *cell, int size)
+{
+	return cell[size-1];
+}
+#else
+#define of_read_ulong(cell, size)	of_read_number(cell, size)
+#endif
+
 #include <asm/prom.h>
 
 /* flag descriptions */
 #define OF_DYNAMIC	1 /* node and properties were allocated via kmalloc */
 #define OF_DETACHED	2 /* node has been detached from the device tree */
 
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
 #define OF_BAD_ADDR	((u64)-1)
 
 extern struct device_node *of_find_node_by_name(struct device_node *from,
diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
new file mode 100644
index 0000000..41d432b
--- /dev/null
+++ b/include/linux/of_fdt.h
@@ -0,0 +1,86 @@
+/*
+ * Definitions for working with the Flattened Device Tree data format
+ *
+ * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
+ * benh@kernel.crashing.org
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_OF_FDT_H
+#define _LINUX_OF_FDT_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* marker */
+#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size,
+						 * content */
+#define OF_DT_NOP		0x4		/* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+#ifndef __ASSEMBLY__
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header {
+	u32	magic;			/* magic word OF_DT_HEADER */
+	u32	totalsize;		/* total size of DT block */
+	u32	off_dt_struct;		/* offset to structure */
+	u32	off_dt_strings;		/* offset to strings */
+	u32	off_mem_rsvmap;		/* offset to memory reserve map */
+	u32	version;		/* format version */
+	u32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	/* version 3 fields below */
+	u32	dt_strings_size;	/* size of the DT strings block */
+	/* version 17 fields below */
+	u32	dt_struct_size;		/* size of the DT structure block */
+};
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+					    const char *uname, int depth,
+					    void *data),
+				  void *data);
+extern void __init *of_get_flat_dt_prop(unsigned long node, const char *name,
+					unsigned long *size);
+extern int __init of_flat_dt_is_compatible(unsigned long node,
+					   const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node* np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+				struct property *newprop,
+				struct property *oldprop);
+
+#endif /* __ASSEMBLY__ */
+#endif /* _LINUX_OF_FDT_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 1b7f2a7..4013b65 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1496,9 +1496,10 @@
 #define PCI_DEVICE_ID_SBE_WANXL400	0x0104
 
 #define PCI_VENDOR_ID_TOSHIBA		0x1179
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO	0x0102
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0103
-#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0105
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0101
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0102
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_3	0x0103
+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_5	0x0105
 #define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
 #define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
 #define PCI_DEVICE_ID_TOSHIBA_TOPIC100	0x0617
@@ -1633,6 +1634,8 @@
 #define PCI_DEVICE_ID_O2_6730		0x673a
 #define PCI_DEVICE_ID_O2_6832		0x6832
 #define PCI_DEVICE_ID_O2_6836		0x6836
+#define PCI_DEVICE_ID_O2_6812		0x6872
+#define PCI_DEVICE_ID_O2_6933		0x6933
 
 #define PCI_VENDOR_ID_3DFX		0x121a
 #define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 7b7fbf4..e3fb256 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -106,6 +106,8 @@
 	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
 	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
 	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
 
 	PERF_COUNT_SW_MAX,			/* non-ABI */
 };
@@ -225,6 +227,7 @@
 #define PERF_COUNTER_IOC_RESET		_IO ('$', 3)
 #define PERF_COUNTER_IOC_PERIOD		_IOW('$', 4, u64)
 #define PERF_COUNTER_IOC_SET_OUTPUT	_IO ('$', 5)
+#define PERF_COUNTER_IOC_SET_FILTER	_IOW('$', 6, char *)
 
 enum perf_counter_ioc_flags {
 	PERF_IOC_FLAG_GROUP		= 1U << 0,
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 9e70126..43adbd7 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -18,6 +18,10 @@
 #include <linux/ioctl.h>
 #include <asm/byteorder.h>
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+#include <asm/hw_breakpoint.h>
+#endif
+
 /*
  * User-space ABI bits:
  */
@@ -31,6 +35,7 @@
 	PERF_TYPE_TRACEPOINT			= 2,
 	PERF_TYPE_HW_CACHE			= 3,
 	PERF_TYPE_RAW				= 4,
+	PERF_TYPE_BREAKPOINT			= 5,
 
 	PERF_TYPE_MAX,				/* non-ABI */
 };
@@ -102,6 +107,8 @@
 	PERF_COUNT_SW_CPU_MIGRATIONS		= 4,
 	PERF_COUNT_SW_PAGE_FAULTS_MIN		= 5,
 	PERF_COUNT_SW_PAGE_FAULTS_MAJ		= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS		= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS		= 8,
 
 	PERF_COUNT_SW_MAX,			/* non-ABI */
 };
@@ -207,6 +214,15 @@
 		__u32		wakeup_events;	  /* wakeup every n events */
 		__u32		wakeup_watermark; /* bytes before wakeup   */
 	};
+
+	union {
+		struct { /* Hardware breakpoint info */
+			__u64		bp_addr;
+			__u32		bp_type;
+			__u32		bp_len;
+		};
+	};
+
 	__u32			__reserved_2;
 
 	__u64			__reserved_3;
@@ -219,8 +235,9 @@
 #define PERF_EVENT_IOC_DISABLE		_IO ('$', 1)
 #define PERF_EVENT_IOC_REFRESH		_IO ('$', 2)
 #define PERF_EVENT_IOC_RESET		_IO ('$', 3)
-#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, u64)
+#define PERF_EVENT_IOC_PERIOD		_IOW('$', 4, __u64)
 #define PERF_EVENT_IOC_SET_OUTPUT	_IO ('$', 5)
+#define PERF_EVENT_IOC_SET_FILTER	_IOW('$', 6, char *)
 
 enum perf_event_ioc_flags {
 	PERF_IOC_FLAG_GROUP		= 1U << 0,
@@ -475,6 +492,11 @@
 			s64		remaining;
 			struct hrtimer	hrtimer;
 		};
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+		union { /* breakpoint */
+			struct arch_hw_breakpoint	info;
+		};
+#endif
 	};
 	atomic64_t			prev_count;
 	u64				sample_period;
@@ -543,6 +565,10 @@
 	void (*func)(struct perf_pending_entry *);
 };
 
+typedef void (*perf_callback_t)(struct perf_event *, void *);
+
+struct perf_sample_data;
+
 /**
  * struct perf_event - performance event kernel representation:
  */
@@ -585,7 +611,7 @@
 	u64				tstamp_running;
 	u64				tstamp_stopped;
 
-	struct perf_event_attr	attr;
+	struct perf_event_attr		attr;
 	struct hw_perf_event		hw;
 
 	struct perf_event_context	*ctx;
@@ -633,7 +659,20 @@
 
 	struct pid_namespace		*ns;
 	u64				id;
+
+	void (*overflow_handler)(struct perf_event *event,
+			int nmi, struct perf_sample_data *data,
+			struct pt_regs *regs);
+
+#ifdef CONFIG_EVENT_PROFILE
+	struct event_filter		*filter;
 #endif
+
+	perf_callback_t			callback;
+
+	perf_callback_t			event_callback;
+
+#endif /* CONFIG_PERF_EVENTS */
 };
 
 /**
@@ -706,7 +745,6 @@
 	int				nmi;
 	int				sample;
 	int				locked;
-	unsigned long			flags;
 };
 
 #ifdef CONFIG_PERF_EVENTS
@@ -738,6 +776,14 @@
 	       struct perf_cpu_context *cpuctx,
 	       struct perf_event_context *ctx, int cpu);
 extern void perf_event_update_userpage(struct perf_event *event);
+extern int perf_event_release_kernel(struct perf_event *event);
+extern struct perf_event *
+perf_event_create_kernel_counter(struct perf_event_attr *attr,
+				int cpu,
+				pid_t pid,
+				perf_callback_t callback);
+extern u64 perf_event_read_value(struct perf_event *event,
+				 u64 *enabled, u64 *running);
 
 struct perf_sample_data {
 	u64				type;
@@ -814,6 +860,7 @@
 extern void perf_event_init(void);
 extern void perf_tp_event(int event_id, u64 addr, u64 count,
 				 void *record, int entry_size);
+extern void perf_bp_event(struct perf_event *event, void *data);
 
 #ifndef perf_misc_flags
 #define perf_misc_flags(regs)	(user_mode(regs) ? PERF_RECORD_MISC_USER : \
@@ -827,6 +874,8 @@
 extern void perf_output_end(struct perf_output_handle *handle);
 extern void perf_output_copy(struct perf_output_handle *handle,
 			     const void *buf, unsigned int len);
+extern int perf_swevent_get_recursion_context(void);
+extern void perf_swevent_put_recursion_context(int rctx);
 #else
 static inline void
 perf_event_task_sched_in(struct task_struct *task, int cpu)		{ }
@@ -848,11 +897,15 @@
 static inline void
 perf_sw_event(u32 event_id, u64 nr, int nmi,
 		     struct pt_regs *regs, u64 addr)			{ }
+static inline void
+perf_bp_event(struct perf_event *event, void *data)		{ }
 
 static inline void perf_event_mmap(struct vm_area_struct *vma)		{ }
 static inline void perf_event_comm(struct task_struct *tsk)		{ }
 static inline void perf_event_fork(struct task_struct *tsk)		{ }
 static inline void perf_event_init(void)				{ }
+static inline int  perf_swevent_get_recursion_context(void)  { return -1; }
+static inline void perf_swevent_put_recursion_context(int rctx)		{ }
 
 #endif
 
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
index 3c842ed..7f6ba86 100644
--- a/include/linux/pkt_cls.h
+++ b/include/linux/pkt_cls.h
@@ -75,8 +75,7 @@
 #define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
 
 /* Action attributes */
-enum
-{
+enum {
 	TCA_ACT_UNSPEC,
 	TCA_ACT_KIND,
 	TCA_ACT_OPTIONS,
@@ -108,8 +107,7 @@
 #define TC_ACT_JUMP		0x10000000
 
 /* Action type identifiers*/
-enum
-{
+enum {
 	TCA_ID_UNSPEC=0,
 	TCA_ID_POLICE=1,
 	/* other actions go here */
@@ -118,8 +116,7 @@
 
 #define TCA_ID_MAX __TCA_ID_MAX
 
-struct tc_police
-{
+struct tc_police {
 	__u32			index;
 	int			action;
 #define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
@@ -138,15 +135,13 @@
 	__u32			capab;
 };
 
-struct tcf_t
-{
+struct tcf_t {
 	__u64   install;
 	__u64   lastuse;
 	__u64   expires;
 };
 
-struct tc_cnt
-{
+struct tc_cnt {
 	int                   refcnt; 
 	int                   bindcnt;
 };
@@ -158,8 +153,7 @@
 	int                   refcnt; \
 	int                   bindcnt
 
-enum
-{
+enum {
 	TCA_POLICE_UNSPEC,
 	TCA_POLICE_TBF,
 	TCA_POLICE_RATE,
@@ -182,8 +176,7 @@
 #define TC_U32_UNSPEC	0
 #define TC_U32_ROOT	(0xFFF00000)
 
-enum
-{
+enum {
 	TCA_U32_UNSPEC,
 	TCA_U32_CLASSID,
 	TCA_U32_HASH,
@@ -200,16 +193,14 @@
 
 #define TCA_U32_MAX (__TCA_U32_MAX - 1)
 
-struct tc_u32_key
-{
+struct tc_u32_key {
 	__be32		mask;
 	__be32		val;
 	int		off;
 	int		offmask;
 };
 
-struct tc_u32_sel
-{
+struct tc_u32_sel {
 	unsigned char		flags;
 	unsigned char		offshift;
 	unsigned char		nkeys;
@@ -223,15 +214,13 @@
 	struct tc_u32_key	keys[0];
 };
 
-struct tc_u32_mark
-{
+struct tc_u32_mark {
 	__u32		val;
 	__u32		mask;
 	__u32		success;
 };
 
-struct tc_u32_pcnt
-{
+struct tc_u32_pcnt {
 	__u64 rcnt;
 	__u64 rhit;
 	__u64 kcnts[0];
@@ -249,8 +238,7 @@
 
 /* RSVP filter */
 
-enum
-{
+enum {
 	TCA_RSVP_UNSPEC,
 	TCA_RSVP_CLASSID,
 	TCA_RSVP_DST,
@@ -263,15 +251,13 @@
 
 #define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
 
-struct tc_rsvp_gpi
-{
+struct tc_rsvp_gpi {
 	__u32	key;
 	__u32	mask;
 	int	offset;
 };
 
-struct tc_rsvp_pinfo
-{
+struct tc_rsvp_pinfo {
 	struct tc_rsvp_gpi dpi;
 	struct tc_rsvp_gpi spi;
 	__u8	protocol;
@@ -282,8 +268,7 @@
 
 /* ROUTE filter */
 
-enum
-{
+enum {
 	TCA_ROUTE4_UNSPEC,
 	TCA_ROUTE4_CLASSID,
 	TCA_ROUTE4_TO,
@@ -299,8 +284,7 @@
 
 /* FW filter */
 
-enum
-{
+enum {
 	TCA_FW_UNSPEC,
 	TCA_FW_CLASSID,
 	TCA_FW_POLICE,
@@ -314,8 +298,7 @@
 
 /* TC index filter */
 
-enum
-{
+enum {
 	TCA_TCINDEX_UNSPEC,
 	TCA_TCINDEX_HASH,
 	TCA_TCINDEX_MASK,
@@ -331,8 +314,7 @@
 
 /* Flow filter */
 
-enum
-{
+enum {
 	FLOW_KEY_SRC,
 	FLOW_KEY_DST,
 	FLOW_KEY_PROTO,
@@ -355,14 +337,12 @@
 
 #define FLOW_KEY_MAX	(__FLOW_KEY_MAX - 1)
 
-enum
-{
+enum {
 	FLOW_MODE_MAP,
 	FLOW_MODE_HASH,
 };
 
-enum
-{
+enum {
 	TCA_FLOW_UNSPEC,
 	TCA_FLOW_KEYS,
 	TCA_FLOW_MODE,
@@ -383,8 +363,7 @@
 
 /* Basic filter */
 
-enum
-{
+enum {
 	TCA_BASIC_UNSPEC,
 	TCA_BASIC_CLASSID,
 	TCA_BASIC_EMATCHES,
@@ -398,8 +377,7 @@
 
 /* Cgroup classifier */
 
-enum
-{
+enum {
 	TCA_CGROUP_UNSPEC,
 	TCA_CGROUP_ACT,
 	TCA_CGROUP_POLICE,
@@ -411,14 +389,12 @@
 
 /* Extended Matches */
 
-struct tcf_ematch_tree_hdr
-{
+struct tcf_ematch_tree_hdr {
 	__u16		nmatches;
 	__u16		progid;
 };
 
-enum
-{
+enum {
 	TCA_EMATCH_TREE_UNSPEC,
 	TCA_EMATCH_TREE_HDR,
 	TCA_EMATCH_TREE_LIST,
@@ -426,8 +402,7 @@
 };
 #define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
 
-struct tcf_ematch_hdr
-{
+struct tcf_ematch_hdr {
 	__u16		matchid;
 	__u16		kind;
 	__u16		flags;
@@ -457,8 +432,7 @@
 #define TCF_EM_REL_MASK	3
 #define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
 
-enum
-{
+enum {
 	TCF_LAYER_LINK,
 	TCF_LAYER_NETWORK,
 	TCF_LAYER_TRANSPORT,
@@ -479,13 +453,11 @@
 #define        TCF_EM_VLAN		6
 #define	TCF_EM_MAX		6
 
-enum
-{
+enum {
 	TCF_EM_PROG_TC
 };
 
-enum
-{
+enum {
 	TCF_EM_OPND_EQ,
 	TCF_EM_OPND_GT,
 	TCF_EM_OPND_LT
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index d51a2b3..2cfa4bc 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -29,8 +29,7 @@
    Particular schedulers may have also their private records.
  */
 
-struct tc_stats
-{
+struct tc_stats {
 	__u64	bytes;			/* NUmber of enqueues bytes */
 	__u32	packets;		/* Number of enqueued packets	*/
 	__u32	drops;			/* Packets dropped because of lack of resources */
@@ -42,8 +41,7 @@
 	__u32	backlog;
 };
 
-struct tc_estimator
-{
+struct tc_estimator {
 	signed char	interval;
 	unsigned char	ewma_log;
 };
@@ -75,8 +73,7 @@
 #define TC_H_ROOT	(0xFFFFFFFFU)
 #define TC_H_INGRESS    (0xFFFFFFF1U)
 
-struct tc_ratespec
-{
+struct tc_ratespec {
 	unsigned char	cell_log;
 	unsigned char	__reserved;
 	unsigned short	overhead;
@@ -109,8 +106,7 @@
 
 /* FIFO section */
 
-struct tc_fifo_qopt
-{
+struct tc_fifo_qopt {
 	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
 };
 
@@ -119,8 +115,7 @@
 #define TCQ_PRIO_BANDS	16
 #define TCQ_MIN_PRIO_BANDS 2
 
-struct tc_prio_qopt
-{
+struct tc_prio_qopt {
 	int	bands;			/* Number of bands */
 	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
 };
@@ -134,8 +129,7 @@
 
 /* TBF section */
 
-struct tc_tbf_qopt
-{
+struct tc_tbf_qopt {
 	struct tc_ratespec rate;
 	struct tc_ratespec peakrate;
 	__u32		limit;
@@ -143,8 +137,7 @@
 	__u32		mtu;
 };
 
-enum
-{
+enum {
 	TCA_TBF_UNSPEC,
 	TCA_TBF_PARMS,
 	TCA_TBF_RTAB,
@@ -161,8 +154,7 @@
 
 /* SFQ section */
 
-struct tc_sfq_qopt
-{
+struct tc_sfq_qopt {
 	unsigned	quantum;	/* Bytes per round allocated to flow */
 	int		perturb_period;	/* Period of hash perturbation */
 	__u32		limit;		/* Maximal packets in queue */
@@ -170,8 +162,7 @@
 	unsigned	flows;		/* Maximal number of flows  */
 };
 
-struct tc_sfq_xstats
-{
+struct tc_sfq_xstats {
 	__s32		allot;
 };
 
@@ -186,8 +177,7 @@
 
 /* RED section */
 
-enum
-{
+enum {
 	TCA_RED_UNSPEC,
 	TCA_RED_PARMS,
 	TCA_RED_STAB,
@@ -196,8 +186,7 @@
 
 #define TCA_RED_MAX (__TCA_RED_MAX - 1)
 
-struct tc_red_qopt
-{
+struct tc_red_qopt {
 	__u32		limit;		/* HARD maximal queue length (bytes)	*/
 	__u32		qth_min;	/* Min average length threshold (bytes) */
 	__u32		qth_max;	/* Max average length threshold (bytes) */
@@ -209,8 +198,7 @@
 #define TC_RED_HARDDROP	2
 };
 
-struct tc_red_xstats
-{
+struct tc_red_xstats {
 	__u32           early;          /* Early drops */
 	__u32           pdrop;          /* Drops due to queue limits */
 	__u32           other;          /* Drops due to drop() calls */
@@ -221,8 +209,7 @@
 
 #define MAX_DPs 16
 
-enum
-{
+enum {
        TCA_GRED_UNSPEC,
        TCA_GRED_PARMS,
        TCA_GRED_STAB,
@@ -232,8 +219,7 @@
 
 #define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
 
-struct tc_gred_qopt
-{
+struct tc_gred_qopt {
 	__u32		limit;        /* HARD maximal queue length (bytes)    */
 	__u32		qth_min;      /* Min average length threshold (bytes) */
 	__u32		qth_max;      /* Max average length threshold (bytes) */
@@ -253,8 +239,7 @@
 };
 
 /* gred setup */
-struct tc_gred_sopt
-{
+struct tc_gred_sopt {
 	__u32		DPs;
 	__u32		def_DP;
 	__u8		grio;
@@ -267,8 +252,7 @@
 #define TC_HTB_MAXDEPTH		8
 #define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
 
-struct tc_htb_opt
-{
+struct tc_htb_opt {
 	struct tc_ratespec 	rate;
 	struct tc_ratespec 	ceil;
 	__u32	buffer;
@@ -277,8 +261,7 @@
 	__u32	level;		/* out only */
 	__u32	prio;
 };
-struct tc_htb_glob
-{
+struct tc_htb_glob {
 	__u32 version;		/* to match HTB/TC */
     	__u32 rate2quantum;	/* bps->quantum divisor */
     	__u32 defcls;		/* default class number */
@@ -287,8 +270,7 @@
 	/* stats */
 	__u32 direct_pkts; /* count of non shapped packets */
 };
-enum
-{
+enum {
 	TCA_HTB_UNSPEC,
 	TCA_HTB_PARMS,
 	TCA_HTB_INIT,
@@ -299,8 +281,7 @@
 
 #define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
 
-struct tc_htb_xstats
-{
+struct tc_htb_xstats {
 	__u32 lends;
 	__u32 borrows;
 	__u32 giants;	/* too big packets (rate will not be accurate) */
@@ -310,28 +291,24 @@
 
 /* HFSC section */
 
-struct tc_hfsc_qopt
-{
+struct tc_hfsc_qopt {
 	__u16	defcls;		/* default class */
 };
 
-struct tc_service_curve
-{
+struct tc_service_curve {
 	__u32	m1;		/* slope of the first segment in bps */
 	__u32	d;		/* x-projection of the first segment in us */
 	__u32	m2;		/* slope of the second segment in bps */
 };
 
-struct tc_hfsc_stats
-{
+struct tc_hfsc_stats {
 	__u64	work;		/* total work done */
 	__u64	rtwork;		/* work done by real-time criteria */
 	__u32	period;		/* current period */
 	__u32	level;		/* class level in hierarchy */
 };
 
-enum
-{
+enum {
 	TCA_HFSC_UNSPEC,
 	TCA_HFSC_RSC,
 	TCA_HFSC_FSC,
@@ -348,8 +325,7 @@
 #define TC_CBQ_MAXLEVEL		8
 #define TC_CBQ_DEF_EWMA		5
 
-struct tc_cbq_lssopt
-{
+struct tc_cbq_lssopt {
 	unsigned char	change;
 	unsigned char	flags;
 #define TCF_CBQ_LSS_BOUNDED	1
@@ -368,8 +344,7 @@
 	__u32		avpkt;
 };
 
-struct tc_cbq_wrropt
-{
+struct tc_cbq_wrropt {
 	unsigned char	flags;
 	unsigned char	priority;
 	unsigned char	cpriority;
@@ -378,8 +353,7 @@
 	__u32		weight;
 };
 
-struct tc_cbq_ovl
-{
+struct tc_cbq_ovl {
 	unsigned char	strategy;
 #define	TC_CBQ_OVL_CLASSIC	0
 #define	TC_CBQ_OVL_DELAY	1
@@ -391,30 +365,26 @@
 	__u32		penalty;
 };
 
-struct tc_cbq_police
-{
+struct tc_cbq_police {
 	unsigned char	police;
 	unsigned char	__res1;
 	unsigned short	__res2;
 };
 
-struct tc_cbq_fopt
-{
+struct tc_cbq_fopt {
 	__u32		split;
 	__u32		defmap;
 	__u32		defchange;
 };
 
-struct tc_cbq_xstats
-{
+struct tc_cbq_xstats {
 	__u32		borrows;
 	__u32		overactions;
 	__s32		avgidle;
 	__s32		undertime;
 };
 
-enum
-{
+enum {
 	TCA_CBQ_UNSPEC,
 	TCA_CBQ_LSSOPT,
 	TCA_CBQ_WRROPT,
@@ -459,8 +429,7 @@
 
 /* Network emulator */
 
-enum
-{
+enum {
 	TCA_NETEM_UNSPEC,
 	TCA_NETEM_CORR,
 	TCA_NETEM_DELAY_DIST,
@@ -471,8 +440,7 @@
 
 #define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
 
-struct tc_netem_qopt
-{
+struct tc_netem_qopt {
 	__u32	latency;	/* added delay (us) */
 	__u32   limit;		/* fifo limit (packets) */
 	__u32	loss;		/* random packet loss (0=none ~0=100%) */
@@ -481,21 +449,18 @@
 	__u32	jitter;		/* random jitter in latency (us) */
 };
 
-struct tc_netem_corr
-{
+struct tc_netem_corr {
 	__u32	delay_corr;	/* delay correlation */
 	__u32	loss_corr;	/* packet loss correlation */
 	__u32	dup_corr;	/* duplicate correlation  */
 };
 
-struct tc_netem_reorder
-{
+struct tc_netem_reorder {
 	__u32	probability;
 	__u32	correlation;
 };
 
-struct tc_netem_corrupt
-{
+struct tc_netem_corrupt {
 	__u32	probability;
 	__u32	correlation;
 };
@@ -504,8 +469,7 @@
 
 /* DRR */
 
-enum
-{
+enum {
 	TCA_DRR_UNSPEC,
 	TCA_DRR_QUANTUM,
 	__TCA_DRR_MAX
@@ -513,8 +477,7 @@
 
 #define TCA_DRR_MAX	(__TCA_DRR_MAX - 1)
 
-struct tc_drr_stats
-{
+struct tc_drr_stats {
 	__u32	deficit;
 };
 
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 3b7e04b..0d65934 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -178,9 +178,10 @@
  *	This need not mean that the device should be put into a low power state.
  *	For example, if the device is behind a link which is about to be turned
  *	off, the device may remain at full power.  If the device does go to low
- *	power and if device_may_wakeup(dev) is true, remote wake-up (i.e., a
- *	hardware mechanism allowing the device to request a change of its power
- *	state, such as PCI PME) should be enabled for it.
+ *	power and is capable of generating run-time wake-up events, remote
+ *	wake-up (i.e., a hardware mechanism allowing the device to request a
+ *	change of its power state via a wake-up event, such as PCI PME) should
+ *	be enabled for it.
  *
  * @runtime_resume: Put the device into the fully active state in response to a
  *	wake-up event generated by hardware or at the request of software.  If
@@ -428,6 +429,7 @@
 	unsigned int		idle_notification:1;
 	unsigned int		request_pending:1;
 	unsigned int		deferred_resume:1;
+	unsigned int		run_wake:1;
 	enum rpm_request	request;
 	enum rpm_status		runtime_status;
 	int			runtime_error;
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 4408704..370ce0a 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -50,6 +50,16 @@
 	atomic_add_unless(&dev->power.usage_count, -1, 0);
 }
 
+static inline bool device_run_wake(struct device *dev)
+{
+	return dev->power.run_wake;
+}
+
+static inline void device_set_run_wake(struct device *dev, bool enable)
+{
+	dev->power.run_wake = enable;
+}
+
 #else /* !CONFIG_PM_RUNTIME */
 
 static inline int pm_runtime_idle(struct device *dev) { return -ENOSYS; }
@@ -73,6 +83,8 @@
 static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
 static inline void pm_runtime_get_noresume(struct device *dev) {}
 static inline void pm_runtime_put_noidle(struct device *dev) {}
+static inline bool device_run_wake(struct device *dev) { return false; }
+static inline void device_set_run_wake(struct device *dev, bool enable) {}
 
 #endif /* !CONFIG_PM_RUNTIME */
 
diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h
index 065a365..6760816 100644
--- a/include/linux/posix_acl.h
+++ b/include/linux/posix_acl.h
@@ -147,6 +147,20 @@
 	if (old != ACL_NOT_CACHED)
 		posix_acl_release(old);
 }
+
+static inline void forget_all_cached_acls(struct inode *inode)
+{
+	struct posix_acl *old_access, *old_default;
+	spin_lock(&inode->i_lock);
+	old_access = inode->i_acl;
+	old_default = inode->i_default_acl;
+	inode->i_acl = inode->i_default_acl = ACL_NOT_CACHED;
+	spin_unlock(&inode->i_lock);
+	if (old_access != ACL_NOT_CACHED)
+		posix_acl_release(old_access);
+	if (old_default != ACL_NOT_CACHED)
+		posix_acl_release(old_default);
+}
 #endif
 
 static inline void cache_no_acl(struct inode *inode)
diff --git a/include/linux/preempt.h b/include/linux/preempt.h
index 72b1a10..2e681d9 100644
--- a/include/linux/preempt.h
+++ b/include/linux/preempt.h
@@ -105,6 +105,11 @@
  * @sched_out: we've just been preempted
  *    notifier: struct preempt_notifier for the task being preempted
  *    next: the task that's kicking us out
+ *
+ * Please note that sched_in and out are called under different
+ * contexts.  sched_out is called with rq lock held and irq disabled
+ * while sched_in is called without rq lock and irq enabled.  This
+ * difference is intentional and depended upon by its users.
  */
 struct preempt_ops {
 	void (*sched_in)(struct preempt_notifier *notifier, int cpu);
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 78c4889..ce9a9b2 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -376,6 +376,17 @@
 	return flags >> _DQUOT_STATE_FLAGS;
 }
 
+#ifdef CONFIG_QUOTA_NETLINK_INTERFACE
+extern void quota_send_warning(short type, unsigned int id, dev_t dev,
+			       const char warntype);
+#else
+static inline void quota_send_warning(short type, unsigned int id, dev_t dev,
+				      const char warntype)
+{
+	return;
+}
+#endif /* CONFIG_QUOTA_NETLINK_INTERFACE */
+
 struct quota_info {
 	unsigned int flags;			/* Flags for diskquotas on this device */
 	struct mutex dqio_mutex;		/* lock device while I/O in progress */
diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h
index 00044b8..668cf1b 100644
--- a/include/linux/ratelimit.h
+++ b/include/linux/ratelimit.h
@@ -1,20 +1,31 @@
 #ifndef _LINUX_RATELIMIT_H
 #define _LINUX_RATELIMIT_H
-#include <linux/param.h>
 
-#define DEFAULT_RATELIMIT_INTERVAL (5 * HZ)
-#define DEFAULT_RATELIMIT_BURST 10
+#include <linux/param.h>
+#include <linux/spinlock_types.h>
+
+#define DEFAULT_RATELIMIT_INTERVAL	(5 * HZ)
+#define DEFAULT_RATELIMIT_BURST		10
 
 struct ratelimit_state {
-	int interval;
-	int burst;
-	int printed;
-	int missed;
-	unsigned long begin;
+	spinlock_t	lock;		/* protect the state */
+
+	int		interval;
+	int		burst;
+	int		printed;
+	int		missed;
+	unsigned long	begin;
 };
 
-#define DEFINE_RATELIMIT_STATE(name, interval, burst)		\
-		struct ratelimit_state name = {interval, burst,}
+#define DEFINE_RATELIMIT_STATE(name, interval_init, burst_init)		\
+									\
+	struct ratelimit_state name = {					\
+		.lock		= __SPIN_LOCK_UNLOCKED(name.lock),	\
+		.interval	= interval_init,			\
+		.burst		= burst_init,				\
+	}
 
-extern int __ratelimit(struct ratelimit_state *rs);
-#endif
+extern int ___ratelimit(struct ratelimit_state *rs, const char *func);
+#define __ratelimit(state) ___ratelimit(state, __func__)
+
+#endif /* _LINUX_RATELIMIT_H */
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index 5710f43..1bf0f70 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -262,6 +262,20 @@
 		(pos) = rcu_dereference((pos)->next))
 
 /**
+ * list_for_each_entry_continue_rcu - continue iteration over list of given type
+ * @pos:	the type * to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ *
+ * Continue to iterate over list of given type, continuing after
+ * the current position.
+ */
+#define list_for_each_entry_continue_rcu(pos, head, member) 		\
+	for (pos = list_entry_rcu(pos->member.next, typeof(*pos), member); \
+	     prefetch(pos->member.next), &pos->member != (head);	\
+	     pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
+
+/**
  * hlist_del_rcu - deletes entry from hash list without re-initialization
  * @n: the element to delete from the hash list.
  *
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 3ebd0b7..24440f4 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -52,11 +52,6 @@
 };
 
 /* Exported common interfaces */
-#ifdef CONFIG_TREE_PREEMPT_RCU
-extern void synchronize_rcu(void);
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-#define synchronize_rcu synchronize_sched
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
 extern void synchronize_rcu_bh(void);
 extern void synchronize_sched(void);
 extern void rcu_barrier(void);
@@ -67,12 +62,11 @@
 
 /* Internal to kernel */
 extern void rcu_init(void);
-extern void rcu_scheduler_starting(void);
-extern int rcu_needs_cpu(int cpu);
-extern int rcu_scheduler_active;
 
 #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
 #include <linux/rcutree.h>
+#elif defined(CONFIG_TINY_RCU)
+#include <linux/rcutiny.h>
 #else
 #error "Unknown RCU implementation specified to kernel configuration"
 #endif
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
new file mode 100644
index 0000000..c4ba9a7
--- /dev/null
+++ b/include/linux/rcutiny.h
@@ -0,0 +1,104 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion, the Bloatwatch edition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ *		Documentation/RCU
+ */
+#ifndef __LINUX_TINY_H
+#define __LINUX_TINY_H
+
+#include <linux/cache.h>
+
+void rcu_sched_qs(int cpu);
+void rcu_bh_qs(int cpu);
+
+#define __rcu_read_lock()	preempt_disable()
+#define __rcu_read_unlock()	preempt_enable()
+#define __rcu_read_lock_bh()	local_bh_disable()
+#define __rcu_read_unlock_bh()	local_bh_enable()
+#define call_rcu_sched		call_rcu
+
+#define rcu_init_sched()	do { } while (0)
+extern void rcu_check_callbacks(int cpu, int user);
+
+static inline int rcu_needs_cpu(int cpu)
+{
+	return 0;
+}
+
+/*
+ * Return the number of grace periods.
+ */
+static inline long rcu_batches_completed(void)
+{
+	return 0;
+}
+
+/*
+ * Return the number of bottom-half grace periods.
+ */
+static inline long rcu_batches_completed_bh(void)
+{
+	return 0;
+}
+
+extern int rcu_expedited_torture_stats(char *page);
+
+#define synchronize_rcu synchronize_sched
+
+static inline void synchronize_rcu_expedited(void)
+{
+	synchronize_sched();
+}
+
+static inline void synchronize_rcu_bh_expedited(void)
+{
+	synchronize_sched();
+}
+
+struct notifier_block;
+
+#ifdef CONFIG_NO_HZ
+
+extern void rcu_enter_nohz(void);
+extern void rcu_exit_nohz(void);
+
+#else /* #ifdef CONFIG_NO_HZ */
+
+static inline void rcu_enter_nohz(void)
+{
+}
+
+static inline void rcu_exit_nohz(void)
+{
+}
+
+#endif /* #else #ifdef CONFIG_NO_HZ */
+
+static inline void rcu_scheduler_starting(void)
+{
+}
+
+static inline void exit_rcu(void)
+{
+}
+
+#endif /* __LINUX_RCUTINY_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 9642c6b..c93eee5 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -34,15 +34,15 @@
 
 extern void rcu_sched_qs(int cpu);
 extern void rcu_bh_qs(int cpu);
-extern int rcu_cpu_notify(struct notifier_block *self,
-			  unsigned long action, void *hcpu);
 extern int rcu_needs_cpu(int cpu);
+extern void rcu_scheduler_starting(void);
 extern int rcu_expedited_torture_stats(char *page);
 
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
 extern void __rcu_read_lock(void);
 extern void __rcu_read_unlock(void);
+extern void synchronize_rcu(void);
 extern void exit_rcu(void);
 
 #else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
@@ -57,7 +57,7 @@
 	preempt_enable();
 }
 
-#define __synchronize_sched() synchronize_rcu()
+#define synchronize_rcu synchronize_sched
 
 static inline void exit_rcu(void)
 {
@@ -83,7 +83,6 @@
 	synchronize_sched_expedited();
 }
 
-extern void __rcu_init(void);
 extern void rcu_check_callbacks(int cpu, int user);
 
 extern long rcu_batches_completed(void);
diff --git a/include/linux/rds.h b/include/linux/rds.h
index 89d46e1a..cab4994 100644
--- a/include/linux/rds.h
+++ b/include/linux/rds.h
@@ -56,6 +56,7 @@
 /* deprecated: RDS_BARRIER 4 */
 #define RDS_RECVERR			5
 #define RDS_CONG_MONITOR		6
+#define RDS_GET_MR_FOR_DEST		7
 
 /*
  * Control message types for SOL_RDS.
@@ -224,6 +225,13 @@
 	uint64_t	flags;
 };
 
+struct rds_get_mr_for_dest_args {
+	struct sockaddr_storage	dest_addr;
+	struct rds_iovec 	vec;
+	u_int64_t		cookie_addr;
+	uint64_t		flags;
+};
+
 struct rds_free_mr_args {
 	rds_rdma_cookie_t cookie;
 	u_int64_t	flags;
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 3392c59..97059d0 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -35,6 +35,8 @@
  * @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
  * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
  * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
  * @NUM_RFKILL_TYPES: number of defined rfkill types
  */
 enum rfkill_type {
@@ -45,6 +47,7 @@
 	RFKILL_TYPE_WIMAX,
 	RFKILL_TYPE_WWAN,
 	RFKILL_TYPE_GPS,
+	RFKILL_TYPE_FM,
 	NUM_RFKILL_TYPES,
 };
 
diff --git a/include/linux/route.h b/include/linux/route.h
index f7ed35d..6600708 100644
--- a/include/linux/route.h
+++ b/include/linux/route.h
@@ -27,8 +27,7 @@
 #include <linux/compiler.h>
 
 /* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
-struct rtentry 
-{
+struct rtentry {
 	unsigned long	rt_pad1;
 	struct sockaddr	rt_dst;		/* target address		*/
 	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index adf2068..14fc906 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -127,8 +127,7 @@
    with attribute type.
  */
 
-struct rtattr
-{
+struct rtattr {
 	unsigned short	rta_len;
 	unsigned short	rta_type;
 };
@@ -154,8 +153,7 @@
  *		Definitions used in routing table administration.
  ****/
 
-struct rtmsg
-{
+struct rtmsg {
 	unsigned char		rtm_family;
 	unsigned char		rtm_dst_len;
 	unsigned char		rtm_src_len;
@@ -171,8 +169,7 @@
 
 /* rtm_type */
 
-enum
-{
+enum {
 	RTN_UNSPEC,
 	RTN_UNICAST,		/* Gateway or direct route	*/
 	RTN_LOCAL,		/* Accept locally		*/
@@ -230,8 +227,7 @@
    could be assigned a value between UNIVERSE and LINK.
 */
 
-enum rt_scope_t
-{
+enum rt_scope_t {
 	RT_SCOPE_UNIVERSE=0,
 /* User defined values  */
 	RT_SCOPE_SITE=200,
@@ -249,8 +245,7 @@
 
 /* Reserved table identifiers */
 
-enum rt_class_t
-{
+enum rt_class_t {
 	RT_TABLE_UNSPEC=0,
 /* User defined values */
 	RT_TABLE_COMPAT=252,
@@ -263,8 +258,7 @@
 
 /* Routing message attributes */
 
-enum rtattr_type_t
-{
+enum rtattr_type_t {
 	RTA_UNSPEC,
 	RTA_DST,
 	RTA_SRC,
@@ -298,8 +292,7 @@
  * and rtt for different paths from multipath.
  */
 
-struct rtnexthop
-{
+struct rtnexthop {
 	unsigned short		rtnh_len;
 	unsigned char		rtnh_flags;
 	unsigned char		rtnh_hops;
@@ -325,8 +318,7 @@
 
 /* RTM_CACHEINFO */
 
-struct rta_cacheinfo
-{
+struct rta_cacheinfo {
 	__u32	rta_clntref;
 	__u32	rta_lastuse;
 	__s32	rta_expires;
@@ -341,8 +333,7 @@
 
 /* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
 
-enum
-{
+enum {
 	RTAX_UNSPEC,
 #define RTAX_UNSPEC RTAX_UNSPEC
 	RTAX_LOCK,
@@ -377,12 +368,13 @@
 #define RTAX_MAX (__RTAX_MAX - 1)
 
 #define RTAX_FEATURE_ECN	0x00000001
-#define RTAX_FEATURE_SACK	0x00000002
-#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_NO_SACK	0x00000002
+#define RTAX_FEATURE_NO_TSTAMP	0x00000004
 #define RTAX_FEATURE_ALLFRAG	0x00000008
+#define RTAX_FEATURE_NO_WSCALE	0x00000010
+#define RTAX_FEATURE_NO_DSACK	0x00000020
 
-struct rta_session
-{
+struct rta_session {
 	__u8	proto;
 	__u8	pad1;
 	__u16	pad2;
@@ -407,8 +399,7 @@
  *		General form of address family dependent message.
  ****/
 
-struct rtgenmsg
-{
+struct rtgenmsg {
 	unsigned char		rtgen_family;
 };
 
@@ -421,8 +412,7 @@
  * on network protocol.
  */
 
-struct ifinfomsg
-{
+struct ifinfomsg {
 	unsigned char	ifi_family;
 	unsigned char	__ifi_pad;
 	unsigned short	ifi_type;		/* ARPHRD_* */
@@ -435,8 +425,7 @@
  *		prefix information 
  ****/
 
-struct prefixmsg
-{
+struct prefixmsg {
 	unsigned char	prefix_family;
 	unsigned char	prefix_pad1;
 	unsigned short	prefix_pad2;
@@ -457,8 +446,7 @@
 
 #define PREFIX_MAX	(__PREFIX_MAX - 1)
 
-struct prefix_cacheinfo
-{
+struct prefix_cacheinfo {
 	__u32	preferred_time;
 	__u32	valid_time;
 };
@@ -468,8 +456,7 @@
  *		Traffic control messages.
  ****/
 
-struct tcmsg
-{
+struct tcmsg {
 	unsigned char	tcm_family;
 	unsigned char	tcm__pad1;
 	unsigned short	tcm__pad2;
@@ -479,8 +466,7 @@
 	__u32		tcm_info;
 };
 
-enum
-{
+enum {
 	TCA_UNSPEC,
 	TCA_KIND,
 	TCA_OPTIONS,
@@ -502,8 +488,7 @@
  *		Neighbor Discovery userland options
  ****/
 
-struct nduseroptmsg
-{
+struct nduseroptmsg {
 	unsigned char	nduseropt_family;
 	unsigned char	nduseropt_pad1;
 	unsigned short	nduseropt_opts_len;	/* Total length of options */
@@ -515,8 +500,7 @@
 	/* Followed by one or more ND options */
 };
 
-enum
-{
+enum {
 	NDUSEROPT_UNSPEC,
 	NDUSEROPT_SRCADDR,
 	__NDUSEROPT_MAX
@@ -598,8 +582,7 @@
 #define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
 
 /* TC action piece */
-struct tcamsg
-{
+struct tcamsg {
 	unsigned char	tca_family;
 	unsigned char	tca__pad1;
 	unsigned short	tca__pad2;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 75e6e60..89115ec 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -145,7 +145,6 @@
 
 
 extern void calc_global_load(void);
-extern u64 cpu_nr_migrations(int cpu);
 
 extern unsigned long get_parent_ip(unsigned long addr);
 
@@ -171,8 +170,6 @@
 }
 #endif
 
-extern unsigned long long time_sync_thresh;
-
 /*
  * Task state bitmask. NOTE! These bits are also
  * encoded in fs/proc/array.c: get_task_state().
@@ -349,7 +346,6 @@
 extern signed long schedule_timeout_interruptible(signed long timeout);
 extern signed long schedule_timeout_killable(signed long timeout);
 extern signed long schedule_timeout_uninterruptible(signed long timeout);
-asmlinkage void __schedule(void);
 asmlinkage void schedule(void);
 extern int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner);
 
@@ -628,6 +624,9 @@
 	cputime_t utime, stime, cutime, cstime;
 	cputime_t gtime;
 	cputime_t cgtime;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+	cputime_t prev_utime, prev_stime;
+#endif
 	unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw;
 	unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt;
 	unsigned long inblock, oublock, cinblock, coublock;
@@ -1013,9 +1012,13 @@
 	return to_cpumask(sd->span);
 }
 
-extern void partition_sched_domains(int ndoms_new, struct cpumask *doms_new,
+extern void partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
 				    struct sched_domain_attr *dattr_new);
 
+/* Allocate an array of sched domains, for partition_sched_domains(). */
+cpumask_var_t *alloc_sched_domains(unsigned int ndoms);
+void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms);
+
 /* Test a flag in parent sched domain */
 static inline int test_sd_parent(struct sched_domain *sd, int flag)
 {
@@ -1033,7 +1036,7 @@
 struct sched_domain_attr;
 
 static inline void
-partition_sched_domains(int ndoms_new, struct cpumask *doms_new,
+partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
 			struct sched_domain_attr *dattr_new)
 {
 }
@@ -1331,7 +1334,9 @@
 
 	cputime_t utime, stime, utimescaled, stimescaled;
 	cputime_t gtime;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
 	cputime_t prev_utime, prev_stime;
+#endif
 	unsigned long nvcsw, nivcsw; /* context switch counts */
 	struct timespec start_time; 		/* monotonic time */
 	struct timespec real_start_time;	/* boot based time */
@@ -1421,17 +1426,17 @@
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	unsigned int irq_events;
-	int hardirqs_enabled;
 	unsigned long hardirq_enable_ip;
-	unsigned int hardirq_enable_event;
 	unsigned long hardirq_disable_ip;
+	unsigned int hardirq_enable_event;
 	unsigned int hardirq_disable_event;
-	int softirqs_enabled;
-	unsigned long softirq_disable_ip;
-	unsigned int softirq_disable_event;
-	unsigned long softirq_enable_ip;
-	unsigned int softirq_enable_event;
+	int hardirqs_enabled;
 	int hardirq_context;
+	unsigned long softirq_disable_ip;
+	unsigned long softirq_enable_ip;
+	unsigned int softirq_disable_event;
+	unsigned int softirq_enable_event;
+	int softirqs_enabled;
 	int softirq_context;
 #endif
 #ifdef CONFIG_LOCKDEP
@@ -1720,9 +1725,8 @@
 		__put_task_struct(t);
 }
 
-extern cputime_t task_utime(struct task_struct *p);
-extern cputime_t task_stime(struct task_struct *p);
-extern cputime_t task_gtime(struct task_struct *p);
+extern void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st);
+extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st);
 
 /*
  * Per process flags
@@ -2086,11 +2090,18 @@
 	return info <= SEND_SIG_FORCED;
 }
 
-/* True if we are on the alternate signal stack.  */
-
+/*
+ * True if we are on the alternate signal stack.
+ */
 static inline int on_sig_stack(unsigned long sp)
 {
-	return (sp - current->sas_ss_sp < current->sas_ss_size);
+#ifdef CONFIG_STACK_GROWSUP
+	return sp >= current->sas_ss_sp &&
+		sp - current->sas_ss_sp < current->sas_ss_size;
+#else
+	return sp > current->sas_ss_sp &&
+		sp - current->sas_ss_sp <= current->sas_ss_size;
+#endif
 }
 
 static inline int sas_ss_flags(unsigned long sp)
diff --git a/include/linux/screen_info.h b/include/linux/screen_info.h
index 1ee2c05..899fbb4 100644
--- a/include/linux/screen_info.h
+++ b/include/linux/screen_info.h
@@ -14,7 +14,8 @@
 	__u16 orig_video_page;	/* 0x04 */
 	__u8  orig_video_mode;	/* 0x06 */
 	__u8  orig_video_cols;	/* 0x07 */
-	__u16 unused2;		/* 0x08 */
+	__u8  flags;		/* 0x08 */
+	__u8  unused2;		/* 0x09 */
 	__u16 orig_video_ega_bx;/* 0x0a */
 	__u16 unused3;		/* 0x0c */
 	__u8  orig_video_lines;	/* 0x0e */
@@ -65,6 +66,8 @@
 
 #define VIDEO_TYPE_EFI		0x70	/* EFI graphic mode		*/
 
+#define VIDEO_FLAGS_NOCURSOR	(1 << 0) /* The video mode has no cursor set */
+
 #ifdef __KERNEL__
 extern struct screen_info screen_info;
 
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index b464b9d..c20d3ce 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -242,6 +242,7 @@
 	SCTP_DATA_FIRST_FRAG	= 0x02,
 	SCTP_DATA_NOT_FRAG	= 0x03,
 	SCTP_DATA_UNORDERED	= 0x04,
+	SCTP_DATA_SACK_IMM	= 0x08,
 };
 enum { SCTP_DATA_FRAG_MASK = 0x03, };
 
diff --git a/include/linux/securebits.h b/include/linux/securebits.h
index d2c5ed8..3340617 100644
--- a/include/linux/securebits.h
+++ b/include/linux/securebits.h
@@ -1,6 +1,15 @@
 #ifndef _LINUX_SECUREBITS_H
 #define _LINUX_SECUREBITS_H 1
 
+/* Each securesetting is implemented using two bits. One bit specifies
+   whether the setting is on or off. The other bit specify whether the
+   setting is locked or not. A setting which is locked cannot be
+   changed from user-level. */
+#define issecure_mask(X)	(1 << (X))
+#ifdef __KERNEL__
+#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
+#endif
+
 #define SECUREBITS_DEFAULT 0x00000000
 
 /* When set UID 0 has no special privileges. When unset, we support
@@ -12,6 +21,9 @@
 #define SECURE_NOROOT			0
 #define SECURE_NOROOT_LOCKED		1  /* make bit-0 immutable */
 
+#define SECBIT_NOROOT		(issecure_mask(SECURE_NOROOT))
+#define SECBIT_NOROOT_LOCKED	(issecure_mask(SECURE_NOROOT_LOCKED))
+
 /* When set, setuid to/from uid 0 does not trigger capability-"fixup".
    When unset, to provide compatiblility with old programs relying on
    set*uid to gain/lose privilege, transitions to/from uid 0 cause
@@ -19,6 +31,10 @@
 #define SECURE_NO_SETUID_FIXUP		2
 #define SECURE_NO_SETUID_FIXUP_LOCKED	3  /* make bit-2 immutable */
 
+#define SECBIT_NO_SETUID_FIXUP	(issecure_mask(SECURE_NO_SETUID_FIXUP))
+#define SECBIT_NO_SETUID_FIXUP_LOCKED \
+			(issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED))
+
 /* When set, a process can retain its capabilities even after
    transitioning to a non-root user (the set-uid fixup suppressed by
    bit 2). Bit-4 is cleared when a process calls exec(); setting both
@@ -27,12 +43,8 @@
 #define SECURE_KEEP_CAPS		4
 #define SECURE_KEEP_CAPS_LOCKED		5  /* make bit-4 immutable */
 
-/* Each securesetting is implemented using two bits. One bit specifies
-   whether the setting is on or off. The other bit specify whether the
-   setting is locked or not. A setting which is locked cannot be
-   changed from user-level. */
-#define issecure_mask(X)	(1 << (X))
-#define issecure(X)		(issecure_mask(X) & current_cred_xxx(securebits))
+#define SECBIT_KEEP_CAPS	(issecure_mask(SECURE_KEEP_CAPS))
+#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))
 
 #define SECURE_ALL_BITS		(issecure_mask(SECURE_NOROOT) | \
 				 issecure_mask(SECURE_NO_SETUID_FIXUP) | \
diff --git a/include/linux/security.h b/include/linux/security.h
index 239e40d..466cbad 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -447,6 +447,22 @@
  *	@new_dir contains the path structure for parent of the new link.
  *	@new_dentry contains the dentry structure of the new link.
  *	Return 0 if permission is granted.
+ * @path_chmod:
+ *	Check for permission to change DAC's permission of a file or directory.
+ *	@dentry contains the dentry structure.
+ *	@mnt contains the vfsmnt structure.
+ *	@mode contains DAC's mode.
+ *	Return 0 if permission is granted.
+ * @path_chown:
+ *	Check for permission to change owner/group of a file or directory.
+ *	@path contains the path structure.
+ *	@uid contains new owner's ID.
+ *	@gid contains new group's ID.
+ *	Return 0 if permission is granted.
+ * @path_chroot:
+ *	Check for permission to change root directory.
+ *	@path contains the path structure.
+ *	Return 0 if permission is granted.
  * @inode_readlink:
  *	Check the permission to read the symbolic link.
  *	@dentry contains the dentry structure for the file link.
@@ -690,6 +706,7 @@
  * @kernel_module_request:
  *	Ability to trigger the kernel to automatically upcall to userspace for
  *	userspace to load a kernel module with the given name.
+ *	@kmod_name name of the module requested by the kernel
  *	Return 0 if successful.
  * @task_setuid:
  *	Check permission before setting one or more of the user identity
@@ -1488,6 +1505,10 @@
 			  struct dentry *new_dentry);
 	int (*path_rename) (struct path *old_dir, struct dentry *old_dentry,
 			    struct path *new_dir, struct dentry *new_dentry);
+	int (*path_chmod) (struct dentry *dentry, struct vfsmount *mnt,
+			   mode_t mode);
+	int (*path_chown) (struct path *path, uid_t uid, gid_t gid);
+	int (*path_chroot) (struct path *path);
 #endif
 
 	int (*inode_alloc_security) (struct inode *inode);
@@ -1557,7 +1578,7 @@
 	void (*cred_transfer)(struct cred *new, const struct cred *old);
 	int (*kernel_act_as)(struct cred *new, u32 secid);
 	int (*kernel_create_files_as)(struct cred *new, struct inode *inode);
-	int (*kernel_module_request)(void);
+	int (*kernel_module_request)(char *kmod_name);
 	int (*task_setuid) (uid_t id0, uid_t id1, uid_t id2, int flags);
 	int (*task_fix_setuid) (struct cred *new, const struct cred *old,
 				int flags);
@@ -1822,7 +1843,7 @@
 void security_transfer_creds(struct cred *new, const struct cred *old);
 int security_kernel_act_as(struct cred *new, u32 secid);
 int security_kernel_create_files_as(struct cred *new, struct inode *inode);
-int security_kernel_module_request(void);
+int security_kernel_module_request(char *kmod_name);
 int security_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags);
 int security_task_fix_setuid(struct cred *new, const struct cred *old,
 			     int flags);
@@ -2387,7 +2408,7 @@
 	return 0;
 }
 
-static inline int security_kernel_module_request(void)
+static inline int security_kernel_module_request(char *kmod_name)
 {
 	return 0;
 }
@@ -2952,6 +2973,10 @@
 		       struct dentry *new_dentry);
 int security_path_rename(struct path *old_dir, struct dentry *old_dentry,
 			 struct path *new_dir, struct dentry *new_dentry);
+int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
+			mode_t mode);
+int security_path_chown(struct path *path, uid_t uid, gid_t gid);
+int security_path_chroot(struct path *path);
 #else	/* CONFIG_SECURITY_PATH */
 static inline int security_path_unlink(struct path *dir, struct dentry *dentry)
 {
@@ -3001,6 +3026,23 @@
 {
 	return 0;
 }
+
+static inline int security_path_chmod(struct dentry *dentry,
+				      struct vfsmount *mnt,
+				      mode_t mode)
+{
+	return 0;
+}
+
+static inline int security_path_chown(struct path *path, uid_t uid, gid_t gid)
+{
+	return 0;
+}
+
+static inline int security_path_chroot(struct path *path)
+{
+	return 0;
+}
 #endif	/* CONFIG_SECURITY_PATH */
 
 #ifdef CONFIG_KEYS
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index db532ce..8c3dd36 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -179,6 +179,9 @@
 /* BCM63xx family SoCs */
 #define PORT_BCM63XX	89
 
+/* Aeroflex Gaisler GRLIB APBUART */
+#define PORT_APBUART    90
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index bcdd660..ae836fd 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -299,7 +299,7 @@
  *	@nfctinfo: Relationship of this skb to the connection
  *	@nfct_reasm: netfilter conntrack re-assembly pointer
  *	@nf_bridge: Saved data about a bridged frame - see br_netfilter.c
- *	@iif: ifindex of device we arrived on
+ *	@skb_iif: ifindex of device we arrived on
  *	@queue_mapping: Queue mapping for multiqueue devices
  *	@tc_index: Traffic control index
  *	@tc_verd: traffic control verdict
@@ -366,7 +366,7 @@
 	struct nf_bridge_info	*nf_bridge;
 #endif
 
-	int			iif;
+	int			skb_iif;
 #ifdef CONFIG_NET_SCHED
 	__u16			tc_index;	/* traffic control index */
 #ifdef CONFIG_NET_CLS_ACT
@@ -389,8 +389,10 @@
 #ifdef CONFIG_NETWORK_SECMARK
 	__u32			secmark;
 #endif
-
-	__u32			mark;
+	union {
+		__u32		mark;
+		__u32		dropcount;
+	};
 
 	__u16			vlan_tci;
 
@@ -414,14 +416,6 @@
 
 #include <asm/system.h>
 
-#ifdef CONFIG_HAS_DMA
-#include <linux/dma-mapping.h>
-extern int skb_dma_map(struct device *dev, struct sk_buff *skb,
-		       enum dma_data_direction dir);
-extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
-			  enum dma_data_direction dir);
-#endif
-
 static inline struct dst_entry *skb_dst(const struct sk_buff *skb)
 {
 	return (struct dst_entry *)skb->_skb_dst;
@@ -489,8 +483,7 @@
 			int len,int odd, struct sk_buff *skb),
 			void *from, int length);
 
-struct skb_seq_state
-{
+struct skb_seq_state {
 	__u32		lower_offset;
 	__u32		upper_offset;
 	__u32		frag_idx;
@@ -1489,6 +1482,16 @@
 	return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
 }
 
+static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+		unsigned int length)
+{
+	struct sk_buff *skb = netdev_alloc_skb(dev, length + NET_IP_ALIGN);
+
+	if (NET_IP_ALIGN && skb)
+		skb_reserve(skb, NET_IP_ALIGN);
+	return skb;
+}
+
 extern struct page *__netdev_alloc_page(struct net_device *dev, gfp_t gfp_mask);
 
 /**
diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h
index b65c888..13337bf 100644
--- a/include/linux/slow-work.h
+++ b/include/linux/slow-work.h
@@ -17,13 +17,20 @@
 #ifdef CONFIG_SLOW_WORK
 
 #include <linux/sysctl.h>
+#include <linux/timer.h>
 
 struct slow_work;
+#ifdef CONFIG_SLOW_WORK_DEBUG
+struct seq_file;
+#endif
 
 /*
  * The operations used to support slow work items
  */
 struct slow_work_ops {
+	/* owner */
+	struct module *owner;
+
 	/* get a ref on a work item
 	 * - return 0 if successful, -ve if not
 	 */
@@ -34,6 +41,11 @@
 
 	/* execute a work item */
 	void (*execute)(struct slow_work *work);
+
+#ifdef CONFIG_SLOW_WORK_DEBUG
+	/* describe a work item for debugfs */
+	void (*desc)(struct slow_work *work, struct seq_file *m);
+#endif
 };
 
 /*
@@ -42,13 +54,24 @@
  *   queued
  */
 struct slow_work {
+	struct module		*owner;	/* the owning module */
 	unsigned long		flags;
 #define SLOW_WORK_PENDING	0	/* item pending (further) execution */
 #define SLOW_WORK_EXECUTING	1	/* item currently executing */
 #define SLOW_WORK_ENQ_DEFERRED	2	/* item enqueue deferred */
 #define SLOW_WORK_VERY_SLOW	3	/* item is very slow */
+#define SLOW_WORK_CANCELLING	4	/* item is being cancelled, don't enqueue */
+#define SLOW_WORK_DELAYED	5	/* item is struct delayed_slow_work with active timer */
 	const struct slow_work_ops *ops; /* operations table for this item */
 	struct list_head	link;	/* link in queue */
+#ifdef CONFIG_SLOW_WORK_DEBUG
+	struct timespec		mark;	/* jiffies at which queued or exec begun */
+#endif
+};
+
+struct delayed_slow_work {
+	struct slow_work	work;
+	struct timer_list	timer;
 };
 
 /**
@@ -67,6 +90,20 @@
 }
 
 /**
+ * slow_work_init - Initialise a delayed slow work item
+ * @work: The work item to initialise
+ * @ops: The operations to use to handle the slow work item
+ *
+ * Initialise a delayed slow work item.
+ */
+static inline void delayed_slow_work_init(struct delayed_slow_work *dwork,
+					  const struct slow_work_ops *ops)
+{
+	init_timer(&dwork->timer);
+	slow_work_init(&dwork->work, ops);
+}
+
+/**
  * vslow_work_init - Initialise a very slow work item
  * @work: The work item to initialise
  * @ops: The operations to use to handle the slow work item
@@ -83,9 +120,40 @@
 	INIT_LIST_HEAD(&work->link);
 }
 
+/**
+ * slow_work_is_queued - Determine if a slow work item is on the work queue
+ * work: The work item to test
+ *
+ * Determine if the specified slow-work item is on the work queue.  This
+ * returns true if it is actually on the queue.
+ *
+ * If the item is executing and has been marked for requeue when execution
+ * finishes, then false will be returned.
+ *
+ * Anyone wishing to wait for completion of execution can wait on the
+ * SLOW_WORK_EXECUTING bit.
+ */
+static inline bool slow_work_is_queued(struct slow_work *work)
+{
+	unsigned long flags = work->flags;
+	return flags & SLOW_WORK_PENDING && !(flags & SLOW_WORK_EXECUTING);
+}
+
 extern int slow_work_enqueue(struct slow_work *work);
-extern int slow_work_register_user(void);
-extern void slow_work_unregister_user(void);
+extern void slow_work_cancel(struct slow_work *work);
+extern int slow_work_register_user(struct module *owner);
+extern void slow_work_unregister_user(struct module *owner);
+
+extern int delayed_slow_work_enqueue(struct delayed_slow_work *dwork,
+				     unsigned long delay);
+
+static inline void delayed_slow_work_cancel(struct delayed_slow_work *dwork)
+{
+	slow_work_cancel(&dwork->work);
+}
+
+extern bool slow_work_sleep_till_thread_needed(struct slow_work *work,
+					       signed long *_timeout);
 
 #ifdef CONFIG_SYSCTL
 extern ctl_table slow_work_sysctls[];
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 39c64ba..7a0570e 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -76,6 +76,9 @@
 void __smp_call_function_single(int cpuid, struct call_single_data *data,
 				int wait);
 
+int smp_call_function_any(const struct cpumask *mask,
+			  void (*func)(void *info), void *info, int wait);
+
 /*
  * Generic and arch helpers
  */
@@ -137,9 +140,15 @@
 #define smp_prepare_boot_cpu()			do {} while (0)
 #define smp_call_function_many(mask, func, info, wait) \
 			(up_smp_call_function(func, info))
-static inline void init_call_single_data(void)
+static inline void init_call_single_data(void) { }
+
+static inline int
+smp_call_function_any(const struct cpumask *mask, void (*func)(void *info),
+		      void *info, int wait)
 {
+	return smp_call_function_single(0, func, info, wait);
 }
+
 #endif /* !SMP */
 
 /*
diff --git a/include/linux/smp_lock.h b/include/linux/smp_lock.h
index 813be59..2ea1dd1 100644
--- a/include/linux/smp_lock.h
+++ b/include/linux/smp_lock.h
@@ -24,8 +24,21 @@
 	return 0;
 }
 
-extern void __lockfunc lock_kernel(void)	__acquires(kernel_lock);
-extern void __lockfunc unlock_kernel(void)	__releases(kernel_lock);
+extern void __lockfunc
+_lock_kernel(const char *func, const char *file, int line)
+__acquires(kernel_lock);
+
+extern void __lockfunc
+_unlock_kernel(const char *func, const char *file, int line)
+__releases(kernel_lock);
+
+#define lock_kernel() do {					\
+	_lock_kernel(__func__, __FILE__, __LINE__);		\
+} while (0)
+
+#define unlock_kernel()	do {					\
+	_unlock_kernel(__func__, __FILE__, __LINE__);		\
+} while (0)
 
 /*
  * Various legacy drivers don't really need the BKL in a specific
@@ -41,8 +54,8 @@
 
 #else
 
-#define lock_kernel()				do { } while(0)
-#define unlock_kernel()				do { } while(0)
+#define lock_kernel()
+#define unlock_kernel()
 #define release_kernel_lock(task)		do { } while(0)
 #define cycle_kernel_lock()			do { } while(0)
 #define reacquire_kernel_lock(task)		0
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 5241e4f..7144e8a 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -30,6 +30,7 @@
 	unsigned int irq_type;
 	unsigned int flags;
 	phy_interface_t phy_interface;
+	unsigned char mac[6];
 };
 
 /* Constants for platform_device irq polarity configuration */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 3273a0c..7b3aae2 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -24,6 +24,9 @@
 #include <linux/types.h>		/* pid_t			*/
 #include <linux/compiler.h>		/* __user			*/
 
+#define __sockaddr_check_size(size)	\
+	BUILD_BUG_ON(((size) > sizeof(struct __kernel_sockaddr_storage)))
+
 #ifdef __KERNEL__
 # ifdef CONFIG_PROC_FS
 struct seq_file;
@@ -65,6 +68,12 @@
 	unsigned	msg_flags;
 };
 
+/* For recvmmsg/sendmmsg */
+struct mmsghdr {
+	struct msghdr   msg_hdr;
+	unsigned        msg_len;
+};
+
 /*
  *	POSIX 1003.1g - ancillary data object information
  *	Ancillary data consits of a sequence of pairs of
@@ -312,6 +321,10 @@
 extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr);
 extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
 
+struct timespec;
+
+extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+			  unsigned int flags, struct timespec *timeout);
 #endif
 #endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
index 11430ca..aed64ed 100644
--- a/include/linux/spi/wl12xx.h
+++ b/include/linux/spi/wl12xx.h
@@ -26,6 +26,7 @@
 
 struct wl12xx_platform_data {
 	void (*set_power)(bool enable);
+	bool use_eeprom;
 };
 
 #endif
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index f0ca7a7..71dccfe 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -79,8 +79,6 @@
  */
 #include <linux/spinlock_types.h>
 
-extern int __lockfunc generic__raw_read_trylock(raw_rwlock_t *lock);
-
 /*
  * Pull the __raw*() functions/declarations (UP-nondebug doesnt need them):
  */
@@ -102,7 +100,7 @@
 
 #else
 # define spin_lock_init(lock)					\
-	do { *(lock) = SPIN_LOCK_UNLOCKED; } while (0)
+	do { *(lock) = __SPIN_LOCK_UNLOCKED(lock); } while (0)
 #endif
 
 #ifdef CONFIG_DEBUG_SPINLOCK
@@ -116,7 +114,7 @@
 } while (0)
 #else
 # define rwlock_init(lock)					\
-	do { *(lock) = RW_LOCK_UNLOCKED; } while (0)
+	do { *(lock) = __RW_LOCK_UNLOCKED(lock); } while (0)
 #endif
 
 #define spin_is_locked(lock)	__raw_spin_is_locked(&(lock)->raw_lock)
diff --git a/include/linux/spinlock_api_smp.h b/include/linux/spinlock_api_smp.h
index 7a7e18f..8264a7f 100644
--- a/include/linux/spinlock_api_smp.h
+++ b/include/linux/spinlock_api_smp.h
@@ -60,137 +60,118 @@
 void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
 							__releases(lock);
 
-/*
- * We inline the unlock functions in the nondebug case:
- */
-#if !defined(CONFIG_DEBUG_SPINLOCK) && !defined(CONFIG_PREEMPT)
-#define __always_inline__spin_unlock
-#define __always_inline__read_unlock
-#define __always_inline__write_unlock
-#define __always_inline__spin_unlock_irq
-#define __always_inline__read_unlock_irq
-#define __always_inline__write_unlock_irq
-#endif
-
-#ifndef CONFIG_DEBUG_SPINLOCK
-#ifndef CONFIG_GENERIC_LOCKBREAK
-
-#ifdef __always_inline__spin_lock
+#ifdef CONFIG_INLINE_SPIN_LOCK
 #define _spin_lock(lock) __spin_lock(lock)
 #endif
 
-#ifdef __always_inline__read_lock
+#ifdef CONFIG_INLINE_READ_LOCK
 #define _read_lock(lock) __read_lock(lock)
 #endif
 
-#ifdef __always_inline__write_lock
+#ifdef CONFIG_INLINE_WRITE_LOCK
 #define _write_lock(lock) __write_lock(lock)
 #endif
 
-#ifdef __always_inline__spin_lock_bh
+#ifdef CONFIG_INLINE_SPIN_LOCK_BH
 #define _spin_lock_bh(lock) __spin_lock_bh(lock)
 #endif
 
-#ifdef __always_inline__read_lock_bh
+#ifdef CONFIG_INLINE_READ_LOCK_BH
 #define _read_lock_bh(lock) __read_lock_bh(lock)
 #endif
 
-#ifdef __always_inline__write_lock_bh
+#ifdef CONFIG_INLINE_WRITE_LOCK_BH
 #define _write_lock_bh(lock) __write_lock_bh(lock)
 #endif
 
-#ifdef __always_inline__spin_lock_irq
+#ifdef CONFIG_INLINE_SPIN_LOCK_IRQ
 #define _spin_lock_irq(lock) __spin_lock_irq(lock)
 #endif
 
-#ifdef __always_inline__read_lock_irq
+#ifdef CONFIG_INLINE_READ_LOCK_IRQ
 #define _read_lock_irq(lock) __read_lock_irq(lock)
 #endif
 
-#ifdef __always_inline__write_lock_irq
+#ifdef CONFIG_INLINE_WRITE_LOCK_IRQ
 #define _write_lock_irq(lock) __write_lock_irq(lock)
 #endif
 
-#ifdef __always_inline__spin_lock_irqsave
+#ifdef CONFIG_INLINE_SPIN_LOCK_IRQSAVE
 #define _spin_lock_irqsave(lock) __spin_lock_irqsave(lock)
 #endif
 
-#ifdef __always_inline__read_lock_irqsave
+#ifdef CONFIG_INLINE_READ_LOCK_IRQSAVE
 #define _read_lock_irqsave(lock) __read_lock_irqsave(lock)
 #endif
 
-#ifdef __always_inline__write_lock_irqsave
+#ifdef CONFIG_INLINE_WRITE_LOCK_IRQSAVE
 #define _write_lock_irqsave(lock) __write_lock_irqsave(lock)
 #endif
 
-#endif /* !CONFIG_GENERIC_LOCKBREAK */
-
-#ifdef __always_inline__spin_trylock
+#ifdef CONFIG_INLINE_SPIN_TRYLOCK
 #define _spin_trylock(lock) __spin_trylock(lock)
 #endif
 
-#ifdef __always_inline__read_trylock
+#ifdef CONFIG_INLINE_READ_TRYLOCK
 #define _read_trylock(lock) __read_trylock(lock)
 #endif
 
-#ifdef __always_inline__write_trylock
+#ifdef CONFIG_INLINE_WRITE_TRYLOCK
 #define _write_trylock(lock) __write_trylock(lock)
 #endif
 
-#ifdef __always_inline__spin_trylock_bh
+#ifdef CONFIG_INLINE_SPIN_TRYLOCK_BH
 #define _spin_trylock_bh(lock) __spin_trylock_bh(lock)
 #endif
 
-#ifdef __always_inline__spin_unlock
+#ifdef CONFIG_INLINE_SPIN_UNLOCK
 #define _spin_unlock(lock) __spin_unlock(lock)
 #endif
 
-#ifdef __always_inline__read_unlock
+#ifdef CONFIG_INLINE_READ_UNLOCK
 #define _read_unlock(lock) __read_unlock(lock)
 #endif
 
-#ifdef __always_inline__write_unlock
+#ifdef CONFIG_INLINE_WRITE_UNLOCK
 #define _write_unlock(lock) __write_unlock(lock)
 #endif
 
-#ifdef __always_inline__spin_unlock_bh
+#ifdef CONFIG_INLINE_SPIN_UNLOCK_BH
 #define _spin_unlock_bh(lock) __spin_unlock_bh(lock)
 #endif
 
-#ifdef __always_inline__read_unlock_bh
+#ifdef CONFIG_INLINE_READ_UNLOCK_BH
 #define _read_unlock_bh(lock) __read_unlock_bh(lock)
 #endif
 
-#ifdef __always_inline__write_unlock_bh
+#ifdef CONFIG_INLINE_WRITE_UNLOCK_BH
 #define _write_unlock_bh(lock) __write_unlock_bh(lock)
 #endif
 
-#ifdef __always_inline__spin_unlock_irq
+#ifdef CONFIG_INLINE_SPIN_UNLOCK_IRQ
 #define _spin_unlock_irq(lock) __spin_unlock_irq(lock)
 #endif
 
-#ifdef __always_inline__read_unlock_irq
+#ifdef CONFIG_INLINE_READ_UNLOCK_IRQ
 #define _read_unlock_irq(lock) __read_unlock_irq(lock)
 #endif
 
-#ifdef __always_inline__write_unlock_irq
+#ifdef CONFIG_INLINE_WRITE_UNLOCK_IRQ
 #define _write_unlock_irq(lock) __write_unlock_irq(lock)
 #endif
 
-#ifdef __always_inline__spin_unlock_irqrestore
+#ifdef CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE
 #define _spin_unlock_irqrestore(lock, flags) __spin_unlock_irqrestore(lock, flags)
 #endif
 
-#ifdef __always_inline__read_unlock_irqrestore
+#ifdef CONFIG_INLINE_READ_UNLOCK_IRQRESTORE
 #define _read_unlock_irqrestore(lock, flags) __read_unlock_irqrestore(lock, flags)
 #endif
 
-#ifdef __always_inline__write_unlock_irqrestore
+#ifdef CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE
 #define _write_unlock_irqrestore(lock, flags) __write_unlock_irqrestore(lock, flags)
 #endif
 
-#endif /* CONFIG_DEBUG_SPINLOCK */
-
 static inline int __spin_trylock(spinlock_t *lock)
 {
 	preempt_disable();
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index aca0eee..4765d97 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -48,6 +48,7 @@
 int srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
 void srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
 void synchronize_srcu(struct srcu_struct *sp);
+void synchronize_srcu_expedited(struct srcu_struct *sp);
 long srcu_batches_completed(struct srcu_struct *sp);
 
 #endif
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 3d0a9ff..24f9885 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -269,7 +269,8 @@
 
 	const struct ssb_bus_ops *ops;
 
-	/* The core in the basic address register window. (PCI bus only) */
+	/* The core currently mapped into the MMIO window.
+	 * Not valid on all host-buses. So don't use outside of SSB. */
 	struct ssb_device *mapped_device;
 	union {
 		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
@@ -281,14 +282,17 @@
 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
 	spinlock_t bar_lock;
 
-	/* The bus this backplane is running on. */
+	/* The host-bus this backplane is running on. */
 	enum ssb_bustype bustype;
-	/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
-	struct pci_dev *host_pci;
-	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
-	struct pcmcia_device *host_pcmcia;
-	/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
-	struct sdio_func *host_sdio;
+	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
+	union {
+		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+		struct pci_dev *host_pci;
+		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+		struct pcmcia_device *host_pcmcia;
+		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+		struct sdio_func *host_sdio;
+	};
 
 	/* See enum ssb_quirks */
 	unsigned int quirks;
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index 73b1f1c..febedcf 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -7,6 +7,8 @@
 struct dma_attrs;
 struct scatterlist;
 
+extern int swiotlb_force;
+
 /*
  * Maximum allowable number of contiguous slabs to map,
  * must be a power of 2.  What is the appropriate value ?
@@ -20,8 +22,7 @@
  */
 #define IO_TLB_SHIFT 11
 
-extern void
-swiotlb_init(void);
+extern void swiotlb_init(int verbose);
 
 extern void
 *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
@@ -88,4 +89,11 @@
 extern int
 swiotlb_dma_supported(struct device *hwdev, u64 mask);
 
+#ifdef CONFIG_SWIOTLB
+extern void __init swiotlb_free(void);
+#else
+static inline void swiotlb_free(void) { }
+#endif
+
+extern void swiotlb_print_info(void);
 #endif /* __LINUX_SWIOTLB_H */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a990ace..bc70c58 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -25,6 +25,7 @@
 struct list_head;
 struct msgbuf;
 struct msghdr;
+struct mmsghdr;
 struct msqid_ds;
 struct new_utsname;
 struct nfsctl_arg;
@@ -99,37 +100,16 @@
 #define __SC_TEST6(t6, a6, ...)	__SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
 
 #ifdef CONFIG_EVENT_PROFILE
-#define TRACE_SYS_ENTER_PROFILE(sname)					       \
-static int prof_sysenter_enable_##sname(void)				       \
-{									       \
-	return reg_prof_syscall_enter("sys"#sname);			       \
-}									       \
-									       \
-static void prof_sysenter_disable_##sname(void)				       \
-{									       \
-	unreg_prof_syscall_enter("sys"#sname);				       \
-}
-
-#define TRACE_SYS_EXIT_PROFILE(sname)					       \
-static int prof_sysexit_enable_##sname(void)				       \
-{									       \
-	return reg_prof_syscall_exit("sys"#sname);			       \
-}									       \
-									       \
-static void prof_sysexit_disable_##sname(void)				       \
-{                                                                              \
-	unreg_prof_syscall_exit("sys"#sname);				       \
-}
 
 #define TRACE_SYS_ENTER_PROFILE_INIT(sname)				       \
 	.profile_count = ATOMIC_INIT(-1),				       \
-	.profile_enable = prof_sysenter_enable_##sname,			       \
-	.profile_disable = prof_sysenter_disable_##sname,
+	.profile_enable = prof_sysenter_enable,				       \
+	.profile_disable = prof_sysenter_disable,
 
 #define TRACE_SYS_EXIT_PROFILE_INIT(sname)				       \
 	.profile_count = ATOMIC_INIT(-1),				       \
-	.profile_enable = prof_sysexit_enable_##sname,			       \
-	.profile_disable = prof_sysexit_disable_##sname,
+	.profile_enable = prof_sysexit_enable,				       \
+	.profile_disable = prof_sysexit_disable,
 #else
 #define TRACE_SYS_ENTER_PROFILE(sname)
 #define TRACE_SYS_ENTER_PROFILE_INIT(sname)
@@ -153,74 +133,46 @@
 #define __SC_STR_TDECL6(t, a, ...)	#t, __SC_STR_TDECL5(__VA_ARGS__)
 
 #define SYSCALL_TRACE_ENTER_EVENT(sname)				\
+	static const struct syscall_metadata __syscall_meta_##sname;	\
 	static struct ftrace_event_call event_enter_##sname;		\
-	struct trace_event enter_syscall_print_##sname = {		\
+	static struct trace_event enter_syscall_print_##sname = {	\
 		.trace                  = print_syscall_enter,		\
 	};								\
-	static int init_enter_##sname(void)				\
-	{								\
-		int num, id;						\
-		num = syscall_name_to_nr("sys"#sname);			\
-		if (num < 0)						\
-			return -ENOSYS;					\
-		id = register_ftrace_event(&enter_syscall_print_##sname);\
-		if (!id)						\
-			return -ENODEV;					\
-		event_enter_##sname.id = id;				\
-		set_syscall_enter_id(num, id);				\
-		INIT_LIST_HEAD(&event_enter_##sname.fields);		\
-		return 0;						\
-	}								\
-	TRACE_SYS_ENTER_PROFILE(sname);					\
 	static struct ftrace_event_call __used				\
 	  __attribute__((__aligned__(4)))				\
 	  __attribute__((section("_ftrace_events")))			\
 	  event_enter_##sname = {					\
 		.name                   = "sys_enter"#sname,		\
 		.system                 = "syscalls",			\
-		.event                  = &event_syscall_enter,		\
-		.raw_init		= init_enter_##sname,		\
+		.event                  = &enter_syscall_print_##sname,	\
+		.raw_init		= init_syscall_trace,		\
 		.show_format		= syscall_enter_format,		\
 		.define_fields		= syscall_enter_define_fields,	\
 		.regfunc		= reg_event_syscall_enter,	\
 		.unregfunc		= unreg_event_syscall_enter,	\
-		.data			= "sys"#sname,			\
+		.data			= (void *)&__syscall_meta_##sname,\
 		TRACE_SYS_ENTER_PROFILE_INIT(sname)			\
 	}
 
 #define SYSCALL_TRACE_EXIT_EVENT(sname)					\
+	static const struct syscall_metadata __syscall_meta_##sname;	\
 	static struct ftrace_event_call event_exit_##sname;		\
-	struct trace_event exit_syscall_print_##sname = {		\
+	static struct trace_event exit_syscall_print_##sname = {	\
 		.trace                  = print_syscall_exit,		\
 	};								\
-	static int init_exit_##sname(void)				\
-	{								\
-		int num, id;						\
-		num = syscall_name_to_nr("sys"#sname);			\
-		if (num < 0)						\
-			return -ENOSYS;					\
-		id = register_ftrace_event(&exit_syscall_print_##sname);\
-		if (!id)						\
-			return -ENODEV;					\
-		event_exit_##sname.id = id;				\
-		set_syscall_exit_id(num, id);				\
-		INIT_LIST_HEAD(&event_exit_##sname.fields);		\
-		return 0;						\
-	}								\
-	TRACE_SYS_EXIT_PROFILE(sname);					\
 	static struct ftrace_event_call __used				\
 	  __attribute__((__aligned__(4)))				\
 	  __attribute__((section("_ftrace_events")))			\
 	  event_exit_##sname = {					\
 		.name                   = "sys_exit"#sname,		\
 		.system                 = "syscalls",			\
-		.event                  = &event_syscall_exit,		\
-		.raw_init		= init_exit_##sname,		\
+		.event                  = &exit_syscall_print_##sname,	\
+		.raw_init		= init_syscall_trace,		\
 		.show_format		= syscall_exit_format,		\
 		.define_fields		= syscall_exit_define_fields,	\
 		.regfunc		= reg_event_syscall_exit,	\
 		.unregfunc		= unreg_event_syscall_exit,	\
-		.data			= "sys"#sname,			\
+		.data			= (void *)&__syscall_meta_##sname,\
 		TRACE_SYS_EXIT_PROFILE_INIT(sname)			\
 	}
 
@@ -677,6 +629,9 @@
 asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
 				struct sockaddr __user *, int __user *);
 asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_recvmmsg(int fd, struct mmsghdr __user *msg,
+			     unsigned int vlen, unsigned flags,
+			     struct timespec __user *timeout);
 asmlinkage long sys_socket(int, int, int);
 asmlinkage long sys_socketpair(int, int, int, int __user *);
 asmlinkage long sys_socketcall(int call, unsigned long __user *args);
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 1e4743e..56af3ca 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -15,9 +15,6 @@
  **  The kernel will then return -ENOTDIR to any application using
  **  the old binary interface.
  **
- **  For new interfaces unless you really need a binary number
- **  please use CTL_UNNUMBERED.
- **
  ****************************************************************
  ****************************************************************
  */
@@ -50,12 +47,6 @@
 
 /* Top-level names: */
 
-/* For internal pattern-matching use only: */
-#ifdef __KERNEL__
-#define CTL_NONE	0
-#define CTL_UNNUMBERED	CTL_NONE	/* sysctl without a binary number */
-#endif
-
 enum
 {
 	CTL_KERN=1,		/* General kernel info and control */
@@ -490,6 +481,7 @@
 	NET_IPV4_CONF_PROMOTE_SECONDARIES=20,
 	NET_IPV4_CONF_ARP_ACCEPT=21,
 	NET_IPV4_CONF_ARP_NOTIFY=22,
+	NET_IPV4_CONF_ACCEPT_LOCAL=23,
 	__NET_IPV4_CONF_MAX
 };
 
@@ -972,10 +964,6 @@
 
 typedef struct ctl_table ctl_table;
 
-typedef int ctl_handler (struct ctl_table *table,
-			 void __user *oldval, size_t __user *oldlenp,
-			 void __user *newval, size_t newlen);
-
 typedef int proc_handler (struct ctl_table *ctl, int write,
 			  void __user *buffer, size_t *lenp, loff_t *ppos);
 
@@ -996,21 +984,10 @@
 extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int,
 				      void __user *, size_t *, loff_t *);
 
-extern int do_sysctl (int __user *name, int nlen,
-		      void __user *oldval, size_t __user *oldlenp,
-		      void __user *newval, size_t newlen);
-
-extern ctl_handler sysctl_data;
-extern ctl_handler sysctl_string;
-extern ctl_handler sysctl_intvec;
-extern ctl_handler sysctl_jiffies;
-extern ctl_handler sysctl_ms_jiffies;
-
-
 /*
  * Register a set of sysctl names by calling register_sysctl_table
- * with an initialised array of struct ctl_table's.  An entry with zero
- * ctl_name and NULL procname terminates the table.  table->de will be
+ * with an initialised array of struct ctl_table's.  An entry with 
+ * NULL procname terminates the table.  table->de will be
  * set up by the registration and need not be initialised in advance.
  *
  * sysctl names can be mirrored automatically under /proc/sys.  The
@@ -1023,24 +1000,11 @@
  * under /proc; non-leaf nodes will be represented by directories.  A
  * null procname disables /proc mirroring at this node.
  *
- * sysctl entries with a zero ctl_name will not be available through
- * the binary sysctl interface.
- *
  * sysctl(2) can automatically manage read and write requests through
  * the sysctl table.  The data and maxlen fields of the ctl_table
  * struct enable minimal validation of the values being written to be
  * performed, and the mode field allows minimal authentication.
  * 
- * More sophisticated management can be enabled by the provision of a
- * strategy routine with the table entry.  This will be called before
- * any automatic read or write of the data is performed.
- * 
- * The strategy routine may return:
- * <0: Error occurred (error is passed to user process)
- * 0:  OK - proceed with automatic read or write.
- * >0: OK - read or write has been done by the strategy routine, so 
- *     return immediately.
- * 
  * There must be a proc_handler routine for any terminal nodes
  * mirrored under /proc/sys (non-terminals are handled by a built-in
  * directory handler).  Several default handlers are available to
@@ -1050,7 +1014,6 @@
 /* A sysctl table is an array of struct ctl_table: */
 struct ctl_table 
 {
-	int ctl_name;			/* Binary ID */
 	const char *procname;		/* Text ID for /proc/sys, or zero */
 	void *data;
 	int maxlen;
@@ -1058,7 +1021,6 @@
 	struct ctl_table *child;
 	struct ctl_table *parent;	/* Automatically set */
 	proc_handler *proc_handler;	/* Callback for text formatting */
-	ctl_handler *strategy;		/* Callback function for all r/w */
 	void *extra1;
 	void *extra2;
 };
@@ -1092,7 +1054,6 @@
 /* struct ctl_path describes where in the hierarchy a table is added */
 struct ctl_path {
 	const char *procname;
-	int ctl_name;
 };
 
 void register_sysctl_root(struct ctl_table_root *root);
diff --git a/include/linux/tc_act/tc_defact.h b/include/linux/tc_act/tc_defact.h
index 964f473..6f65d07 100644
--- a/include/linux/tc_act/tc_defact.h
+++ b/include/linux/tc_act/tc_defact.h
@@ -3,13 +3,11 @@
 
 #include <linux/pkt_cls.h>
 
-struct tc_defact
-{
+struct tc_defact {
 	tc_gen;
 };
                                                                                 
-enum
-{
+enum {
 	TCA_DEF_UNSPEC,
 	TCA_DEF_TM,
 	TCA_DEF_PARMS,
diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h
index e895c0a..f7bf94e 100644
--- a/include/linux/tc_act/tc_gact.h
+++ b/include/linux/tc_act/tc_gact.h
@@ -5,14 +5,12 @@
 #include <linux/pkt_cls.h>
 
 #define TCA_ACT_GACT 5
-struct tc_gact
-{
+struct tc_gact {
 	tc_gen;
 
 };
 
-struct tc_gact_p
-{
+struct tc_gact_p {
 #define PGACT_NONE              0
 #define PGACT_NETRAND           1
 #define PGACT_DETERM            2
@@ -22,8 +20,7 @@
 	int                   paction;
 };
  
-enum
-{
+enum {
 	TCA_GACT_UNSPEC,
 	TCA_GACT_TM,
 	TCA_GACT_PARMS,
diff --git a/include/linux/tc_act/tc_ipt.h b/include/linux/tc_act/tc_ipt.h
index 4b6f7b6..a233556 100644
--- a/include/linux/tc_act/tc_ipt.h
+++ b/include/linux/tc_act/tc_ipt.h
@@ -5,8 +5,7 @@
 
 #define TCA_ACT_IPT 6
 
-enum
-{
+enum {
 	TCA_IPT_UNSPEC,
 	TCA_IPT_TABLE,
 	TCA_IPT_HOOK,
diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h
index 0a99ab6..7561750 100644
--- a/include/linux/tc_act/tc_mirred.h
+++ b/include/linux/tc_act/tc_mirred.h
@@ -10,15 +10,13 @@
 #define TCA_INGRESS_REDIR 3  /* packet redirect to INGRESS*/
 #define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */
                                                                                 
-struct tc_mirred
-{
+struct tc_mirred {
 	tc_gen;
 	int                     eaction;   /* one of IN/EGRESS_MIRROR/REDIR */
 	__u32                   ifindex;  /* ifindex of egress port */
 };
                                                                                 
-enum
-{
+enum {
 	TCA_MIRRED_UNSPEC,
 	TCA_MIRRED_TM,
 	TCA_MIRRED_PARMS,
diff --git a/include/linux/tc_act/tc_nat.h b/include/linux/tc_act/tc_nat.h
index e7cf31e..6663aeb 100644
--- a/include/linux/tc_act/tc_nat.h
+++ b/include/linux/tc_act/tc_nat.h
@@ -6,8 +6,7 @@
 
 #define TCA_ACT_NAT 9
 
-enum
-{
+enum {
 	TCA_NAT_UNSPEC,
 	TCA_NAT_PARMS,
 	TCA_NAT_TM,
@@ -17,8 +16,7 @@
 
 #define TCA_NAT_FLAG_EGRESS 1
 
-struct tc_nat
-{
+struct tc_nat {
 	tc_gen;
 	__be32 old_addr;
 	__be32 new_addr;
diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h
index 54ce906..716cfab 100644
--- a/include/linux/tc_act/tc_pedit.h
+++ b/include/linux/tc_act/tc_pedit.h
@@ -6,8 +6,7 @@
 
 #define TCA_ACT_PEDIT 7
 
-enum
-{
+enum {
 	TCA_PEDIT_UNSPEC,
 	TCA_PEDIT_TM,
 	TCA_PEDIT_PARMS,
@@ -15,8 +14,7 @@
 };
 #define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1)
                                                                                 
-struct tc_pedit_key
-{
+struct tc_pedit_key {
 	__u32           mask;  /* AND */
 	__u32           val;   /*XOR */
 	__u32           off;  /*offset */
@@ -25,8 +23,7 @@
 	__u32           shift;
 };
                                                                                 
-struct tc_pedit_sel
-{
+struct tc_pedit_sel {
 	tc_gen;
 	unsigned char           nkeys;
 	unsigned char           flags;
diff --git a/include/linux/tc_act/tc_skbedit.h b/include/linux/tc_act/tc_skbedit.h
index a14e461..7a2e910 100644
--- a/include/linux/tc_act/tc_skbedit.h
+++ b/include/linux/tc_act/tc_skbedit.h
@@ -26,6 +26,7 @@
 
 #define SKBEDIT_F_PRIORITY		0x1
 #define SKBEDIT_F_QUEUE_MAPPING		0x2
+#define SKBEDIT_F_MARK			0x4
 
 struct tc_skbedit {
 	tc_gen;
@@ -37,6 +38,7 @@
 	TCA_SKBEDIT_PARMS,
 	TCA_SKBEDIT_PRIORITY,
 	TCA_SKBEDIT_QUEUE_MAPPING,
+	TCA_SKBEDIT_MARK,
 	__TCA_SKBEDIT_MAX
 };
 #define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1)
diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h
index 38e7f7b..f34bb1b 100644
--- a/include/linux/tc_ematch/tc_em_cmp.h
+++ b/include/linux/tc_ematch/tc_em_cmp.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/pkt_cls.h>
 
-struct tcf_em_cmp
-{
+struct tcf_em_cmp {
 	__u32		val;
 	__u32		mask;
 	__u16		off;
@@ -15,8 +14,7 @@
 	__u8		opnd:4;
 };
 
-enum
-{
+enum {
 	TCF_EM_ALIGN_U8  = 1,
 	TCF_EM_ALIGN_U16 = 2,
 	TCF_EM_ALIGN_U32 = 4
diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h
index dcfb733..0864206 100644
--- a/include/linux/tc_ematch/tc_em_meta.h
+++ b/include/linux/tc_ematch/tc_em_meta.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/pkt_cls.h>
 
-enum
-{
+enum {
 	TCA_EM_META_UNSPEC,
 	TCA_EM_META_HDR,
 	TCA_EM_META_LVALUE,
@@ -14,8 +13,7 @@
 };
 #define TCA_EM_META_MAX (__TCA_EM_META_MAX - 1)
 
-struct tcf_meta_val
-{
+struct tcf_meta_val {
 	__u16			kind;
 	__u8			shift;
 	__u8			op;
@@ -26,16 +24,14 @@
 #define TCF_META_ID_MASK	0x7ff
 #define TCF_META_ID(kind)	((kind) & TCF_META_ID_MASK)
 
-enum
-{
+enum {
 	TCF_META_TYPE_VAR,
 	TCF_META_TYPE_INT,
 	__TCF_META_TYPE_MAX
 };
 #define TCF_META_TYPE_MAX (__TCF_META_TYPE_MAX - 1)
 
-enum
-{
+enum {
 	TCF_META_ID_VALUE,
 	TCF_META_ID_RANDOM,
 	TCF_META_ID_LOADAVG_0,
@@ -87,8 +83,7 @@
 };
 #define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1)
 
-struct tcf_meta_hdr
-{
+struct tcf_meta_hdr {
 	struct tcf_meta_val	left;
 	struct tcf_meta_val	right;
 };
diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h
index 9ed8c2e..7172cfb 100644
--- a/include/linux/tc_ematch/tc_em_nbyte.h
+++ b/include/linux/tc_ematch/tc_em_nbyte.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/pkt_cls.h>
 
-struct tcf_em_nbyte
-{
+struct tcf_em_nbyte {
 	__u16		off;
 	__u16		len:12;
 	__u8		layer:4;
diff --git a/include/linux/tc_ematch/tc_em_text.h b/include/linux/tc_ematch/tc_em_text.h
index d12a73a..5aac404 100644
--- a/include/linux/tc_ematch/tc_em_text.h
+++ b/include/linux/tc_ematch/tc_em_text.h
@@ -6,8 +6,7 @@
 
 #define TC_EM_TEXT_ALGOSIZ	16
 
-struct tcf_em_text
-{
+struct tcf_em_text {
 	char		algo[TC_EM_TEXT_ALGOSIZ];
 	__u16		from_offset;
 	__u16		to_offset;
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 61723a7..7fee8a4 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -81,6 +81,12 @@
 	TCP_DATA_OFFSET = __cpu_to_be32(0xF0000000)
 }; 
 
+/*
+ * TCP general constants
+ */
+#define TCP_MSS_DEFAULT		 536U	/* IPv4 (RFC1122, RFC2581) */
+#define TCP_MSS_DESIRED		1220U	/* IPv6 (tunneled), EDNS0 (RFC3226) */
+
 /* TCP socket options */
 #define TCP_NODELAY		1	/* Turn off Nagle's algorithm. */
 #define TCP_MAXSEG		2	/* Limit MSS */
@@ -96,14 +102,15 @@
 #define TCP_QUICKACK		12	/* Block/reenable quick acks */
 #define TCP_CONGESTION		13	/* Congestion control algorithm */
 #define TCP_MD5SIG		14	/* TCP MD5 Signature (RFC2385) */
+#define TCP_COOKIE_TRANSACTIONS	15	/* TCP Cookie Transactions */
 
+/* for TCP_INFO socket option */
 #define TCPI_OPT_TIMESTAMPS	1
 #define TCPI_OPT_SACK		2
 #define TCPI_OPT_WSCALE		4
 #define TCPI_OPT_ECN		8
 
-enum tcp_ca_state
-{
+enum tcp_ca_state {
 	TCP_CA_Open = 0,
 #define TCPF_CA_Open	(1<<TCP_CA_Open)
 	TCP_CA_Disorder = 1,
@@ -116,8 +123,7 @@
 #define TCPF_CA_Loss	(1<<TCP_CA_Loss)
 };
 
-struct tcp_info
-{
+struct tcp_info {
 	__u8	tcpi_state;
 	__u8	tcpi_ca_state;
 	__u8	tcpi_retransmits;
@@ -170,6 +176,30 @@
 	__u8	tcpm_key[TCP_MD5SIG_MAXKEYLEN];		/* key (binary) */
 };
 
+/* for TCP_COOKIE_TRANSACTIONS (TCPCT) socket option */
+#define TCP_COOKIE_MIN		 8		/*  64-bits */
+#define TCP_COOKIE_MAX		16		/* 128-bits */
+#define TCP_COOKIE_PAIR_SIZE	(2*TCP_COOKIE_MAX)
+
+/* Flags for both getsockopt and setsockopt */
+#define TCP_COOKIE_IN_ALWAYS	(1 << 0)	/* Discard SYN without cookie */
+#define TCP_COOKIE_OUT_NEVER	(1 << 1)	/* Prohibit outgoing cookies,
+						 * supercedes everything. */
+
+/* Flags for getsockopt */
+#define TCP_S_DATA_IN		(1 << 2)	/* Was data received? */
+#define TCP_S_DATA_OUT		(1 << 3)	/* Was data sent? */
+
+/* TCP_COOKIE_TRANSACTIONS data */
+struct tcp_cookie_transactions {
+	__u16	tcpct_flags;			/* see above */
+	__u8	__tcpct_pad1;			/* zero */
+	__u8	tcpct_cookie_desired;		/* bytes */
+	__u16	tcpct_s_data_desired;		/* bytes of variable data */
+	__u16	tcpct_used;			/* bytes in value */
+	__u8	tcpct_value[TCP_MSS_DEFAULT];
+};
+
 #ifdef __KERNEL__
 
 #include <linux/skbuff.h>
@@ -217,26 +247,38 @@
 		sack_ok : 4,	/* SACK seen on SYN packet		*/
 		snd_wscale : 4,	/* Window scaling received from sender	*/
 		rcv_wscale : 4;	/* Window scaling to send to receiver	*/
-/*	SACKs data	*/
+	u8	cookie_plus:6,	/* bytes in authenticator/cookie option	*/
+		cookie_out_never:1,
+		cookie_in_always:1;
 	u8	num_sacks;	/* Number of SACK blocks		*/
-	u16	user_mss;  	/* mss requested by user in ioctl */
+	u16	user_mss;	/* mss requested by user in ioctl	*/
 	u16	mss_clamp;	/* Maximal mss, negotiated at connection setup */
 };
 
+static inline void tcp_clear_options(struct tcp_options_received *rx_opt)
+{
+	rx_opt->tstamp_ok = rx_opt->sack_ok = 0;
+	rx_opt->wscale_ok = rx_opt->snd_wscale = 0;
+	rx_opt->cookie_plus = 0;
+}
+
 /* This is the max number of SACKS that we'll generate and process. It's safe
- * to increse this, although since:
+ * to increase this, although since:
  *   size = TCPOLEN_SACK_BASE_ALIGNED (4) + n * TCPOLEN_SACK_PERBLOCK (8)
  * only four options will fit in a standard TCP header */
 #define TCP_NUM_SACKS 4
 
+struct tcp_cookie_values;
+struct tcp_request_sock_ops;
+
 struct tcp_request_sock {
 	struct inet_request_sock 	req;
 #ifdef CONFIG_TCP_MD5SIG
 	/* Only used by TCP MD5 Signature so far. */
 	const struct tcp_request_sock_ops *af_specific;
 #endif
-	u32			 	rcv_isn;
-	u32			 	snt_isn;
+	u32				rcv_isn;
+	u32				snt_isn;
 };
 
 static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req)
@@ -406,6 +448,12 @@
 /* TCP MD5 Signature Option information */
 	struct tcp_md5sig_info	*md5sig_info;
 #endif
+
+	/* When the cookie options are generated and exchanged, then this
+	 * object holds a reference to them (cookie_values->kref).  Also
+	 * contains related tcp_cookie_transactions fields.
+	 */
+	struct tcp_cookie_values  *cookie_values;
 };
 
 static inline struct tcp_sock *tcp_sk(const struct sock *sk)
@@ -424,6 +472,10 @@
 	u16			  tw_md5_keylen;
 	u8			  tw_md5_key[TCP_MD5SIG_MAXKEYLEN];
 #endif
+	/* Few sockets in timewait have cookies; in that case, then this
+	 * object holds a reference to them (tw_cookie_values->kref).
+	 */
+	struct tcp_cookie_values  *tw_cookie_values;
 };
 
 static inline struct tcp_timewait_sock *tcp_twsk(const struct sock *sk)
@@ -431,6 +483,6 @@
 	return (struct tcp_timewait_sock *)sk;
 }
 
-#endif
+#endif	/* __KERNEL__ */
 
 #endif	/* _LINUX_TCP_H */
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index 3338b3f..ac5d1c1 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -27,9 +27,16 @@
  */
 #define	TPM_ANY_NUM 0xFFFF
 
-#if defined(CONFIG_TCG_TPM)
+#if defined(CONFIG_TCG_TPM) || defined(CONFIG_TCG_TPM_MODULE)
 
 extern int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf);
 extern int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash);
+#else
+static inline int tpm_pcr_read(u32 chip_num, int pcr_idx, u8 *res_buf) {
+	return -ENODEV;
+}
+static inline int tpm_pcr_extend(u32 chip_num, int pcr_idx, const u8 *hash) {
+	return -ENODEV;
+}
 #endif
 #endif
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 2aac8a8..f59604e 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -280,6 +280,12 @@
  * TRACE_EVENT_FN to perform any (un)registration work.
  */
 
+#define DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, print)
+#define DEFINE_EVENT(template, name, proto, args)		\
+	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+
 #define TRACE_EVENT(name, proto, args, struct, assign, print)	\
 	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
 #define TRACE_EVENT_FN(name, proto, args, struct,		\
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 0cf5c4c..03f72a2 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -45,16 +45,19 @@
 	return (struct udphdr *)skb_transport_header(skb);
 }
 
-#define UDP_HTABLE_SIZE		128
+#define UDP_HTABLE_SIZE_MIN		(CONFIG_BASE_SMALL ? 128 : 256)
 
-static inline int udp_hashfn(struct net *net, const unsigned num)
+static inline int udp_hashfn(struct net *net, unsigned num, unsigned mask)
 {
-	return (num + net_hash_mix(net)) & (UDP_HTABLE_SIZE - 1);
+	return (num + net_hash_mix(net)) & mask;
 }
 
 struct udp_sock {
 	/* inet_sock has to be the first member */
 	struct inet_sock inet;
+#define udp_port_hash		inet.sk.__sk_common.skc_u16hashes[0]
+#define udp_portaddr_hash	inet.sk.__sk_common.skc_u16hashes[1]
+#define udp_portaddr_node	inet.sk.__sk_common.skc_portaddr_node
 	int		 pending;	/* Any pending frames ? */
 	unsigned int	 corkflag;	/* Cork is required */
   	__u16		 encap_type;	/* Is this an Encapsulation socket? */
@@ -85,6 +88,12 @@
 	return (struct udp_sock *)sk;
 }
 
+#define udp_portaddr_for_each_entry(__sk, node, list) \
+	hlist_nulls_for_each_entry(__sk, node, list, __sk_common.skc_portaddr_node)
+
+#define udp_portaddr_for_each_entry_rcu(__sk, node, list) \
+	hlist_nulls_for_each_entry_rcu(__sk, node, list, __sk_common.skc_portaddr_node)
+
 #define IS_UDPLITE(__sk) (udp_sk(__sk)->pcflag)
 
 #endif
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index f814730..8ce6135 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -55,6 +55,7 @@
 	struct sk_buff_head	done;
 	struct sk_buff_head	rxq_pause;
 	struct urb		*interrupt;
+	struct usb_anchor	deferred;
 	struct tasklet_struct	bh;
 
 	struct work_struct	kevent;
@@ -65,6 +66,8 @@
 #		define EVENT_STS_SPLIT	3
 #		define EVENT_LINK_RESET	4
 #		define EVENT_RX_PAUSED	5
+#		define EVENT_DEV_WAKING 6
+#		define EVENT_DEV_ASLEEP 7
 };
 
 static inline struct usb_driver *driver_of(struct usb_interface *intf)
@@ -90,7 +93,9 @@
 #define FLAG_WLAN	0x0080		/* use "wlan%d" names */
 #define FLAG_AVOID_UNLINK_URBS 0x0100	/* don't unlink urbs at usbnet_stop() */
 #define FLAG_SEND_ZLP	0x0200		/* hw requires ZLPs are sent */
+#define FLAG_WWAN	0x0400		/* use "wwan%d" names */
 
+#define FLAG_LINK_INTR	0x0800		/* updates link (carrier) status */
 
 	/* init device ... can sleep, or cause probe() failure */
 	int	(*bind)(struct usbnet *, struct usb_interface *);
@@ -107,6 +112,9 @@
 	/* see if peer is connected ... can sleep */
 	int	(*check_connect)(struct usbnet *);
 
+	/* (dis)activate runtime power management */
+	int	(*manage_power)(struct usbnet *, int);
+
 	/* for status polling */
 	void	(*status)(struct usbnet *, struct urb *);
 
diff --git a/include/linux/user-return-notifier.h b/include/linux/user-return-notifier.h
new file mode 100644
index 0000000..9c4a445
--- /dev/null
+++ b/include/linux/user-return-notifier.h
@@ -0,0 +1,49 @@
+#ifndef _LINUX_USER_RETURN_NOTIFIER_H
+#define _LINUX_USER_RETURN_NOTIFIER_H
+
+#ifdef CONFIG_USER_RETURN_NOTIFIER
+
+#include <linux/list.h>
+#include <linux/sched.h>
+
+struct user_return_notifier {
+	void (*on_user_return)(struct user_return_notifier *urn);
+	struct hlist_node link;
+};
+
+
+void user_return_notifier_register(struct user_return_notifier *urn);
+void user_return_notifier_unregister(struct user_return_notifier *urn);
+
+static inline void propagate_user_return_notify(struct task_struct *prev,
+						struct task_struct *next)
+{
+	if (test_tsk_thread_flag(prev, TIF_USER_RETURN_NOTIFY)) {
+		clear_tsk_thread_flag(prev, TIF_USER_RETURN_NOTIFY);
+		set_tsk_thread_flag(next, TIF_USER_RETURN_NOTIFY);
+	}
+}
+
+void fire_user_return_notifiers(void);
+
+static inline void clear_user_return_notifier(struct task_struct *p)
+{
+	clear_tsk_thread_flag(p, TIF_USER_RETURN_NOTIFY);
+}
+
+#else
+
+struct user_return_notifier {};
+
+static inline void propagate_user_return_notify(struct task_struct *prev,
+						struct task_struct *next)
+{
+}
+
+static inline void fire_user_return_notifiers(void) {}
+
+static inline void clear_user_return_notifier(struct task_struct *p) {}
+
+#endif
+
+#endif
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index c0c4e11..7f56db4 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -110,6 +110,7 @@
 extern struct mutex con_buf_mtx;
 extern char vt_dont_switch;
 extern int default_utf8;
+extern int global_cursor_default;
 
 struct vt_spawn_console {
 	spinlock_t lock;
@@ -130,4 +131,6 @@
 extern int register_vt_notifier(struct notifier_block *nb);
 extern int unregister_vt_notifier(struct notifier_block *nb);
 
+extern void hide_boot_cursor(bool hide);
+
 #endif /* _VT_KERN_H */
diff --git a/include/linux/wimax/debug.h b/include/linux/wimax/debug.h
index c703e03..db8096e 100644
--- a/include/linux/wimax/debug.h
+++ b/include/linux/wimax/debug.h
@@ -450,4 +450,76 @@
 })
 
 
+static inline
+void d_submodule_set(struct d_level *d_level, size_t d_level_size,
+		     const char *submodule, u8 level, const char *tag)
+{
+	struct d_level *itr, *top;
+	int index = -1;
+
+	for (itr = d_level, top = itr + d_level_size; itr < top; itr++) {
+		index++;
+		if (itr->name == NULL) {
+			printk(KERN_ERR "%s: itr->name NULL?? (%p, #%d)\n",
+			       tag, itr, index);
+			continue;
+		}
+		if (!strcmp(itr->name, submodule)) {
+			itr->level = level;
+			return;
+		}
+	}
+	printk(KERN_ERR "%s: unknown submodule %s\n", tag, submodule);
+}
+
+
+/**
+ * d_parse_params - Parse a string with debug parameters from the
+ * command line
+ *
+ * @d_level: level structure (D_LEVEL)
+ * @d_level_size: number of items in the level structure
+ *     (D_LEVEL_SIZE).
+ * @_params: string with the parameters; this is a space (not tab!)
+ *     separated list of NAME:VALUE, where value is the debug level
+ *     and NAME is the name of the submodule.
+ * @tag: string for error messages (example: MODULE.ARGNAME).
+ */
+static inline
+void d_parse_params(struct d_level *d_level, size_t d_level_size,
+		    const char *_params, const char *tag)
+{
+	char submodule[130], *params, *params_orig, *token, *colon;
+	unsigned level, tokens;
+
+	if (_params == NULL)
+		return;
+	params_orig = kstrdup(_params, GFP_KERNEL);
+	params = params_orig;
+	while (1) {
+		token = strsep(&params, " ");
+		if (token == NULL)
+			break;
+		if (*token == '\0')	/* eat joint spaces */
+			continue;
+		/* kernel's sscanf %s eats until whitespace, so we
+		 * replace : by \n so it doesn't get eaten later by
+		 * strsep */
+		colon = strchr(token, ':');
+		if (colon != NULL)
+			*colon = '\n';
+		tokens = sscanf(token, "%s\n%u", submodule, &level);
+		if (colon != NULL)
+			*colon = ':';	/* set back, for error messages */
+		if (tokens == 2)
+			d_submodule_set(d_level, d_level_size,
+					submodule, level, tag);
+		else
+			printk(KERN_ERR "%s: can't parse '%s' as a "
+			       "SUBMODULE:LEVEL (%d tokens)\n",
+			       tag, token, tokens);
+	}
+	kfree(params_orig);
+}
+
 #endif /* #ifndef __debug__h__ */
diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h
index 433693e..62d3561 100644
--- a/include/linux/wimax/i2400m.h
+++ b/include/linux/wimax/i2400m.h
@@ -138,7 +138,7 @@
 	__le32 module_id;
 	__le32 module_vendor;
 	__le32 date;		/* BCD YYYMMDD */
-	__le32 size;
+	__le32 size;            /* in dwords */
 	__le32 key_size;	/* in dwords */
 	__le32 modulus_size;	/* in dwords */
 	__le32 exponent_size;	/* in dwords */
@@ -168,16 +168,6 @@
 };
 
 
-/* Constants for bcf->module_id */
-enum i2400m_bcf_mod_id {
-	/* Firmware file carries its own pokes -- pokes are a set of
-	 * magical values that have to be written in certain memory
-	 * addresses to get the device up and ready for firmware
-	 * download when it is in non-signed boot mode. */
-	I2400M_BCF_MOD_ID_POKES = 0x000000001,
-};
-
-
 /**
  * i2400m_bootrom_header - Header for a boot-mode command
  *
@@ -276,6 +266,7 @@
 	I2400M_WARM_RESET_BARKER = 0x50f750f7,
 	I2400M_NBOOT_BARKER = 0xdeadbeef,
 	I2400M_SBOOT_BARKER = 0x0ff1c1a1,
+	I2400M_SBOOT_BARKER_6050 = 0x80000001,
 	I2400M_ACK_BARKER = 0xfeedbabe,
 	I2400M_D2H_MSG_BARKER = 0xbeefbabe,
 };
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 66ebddc..705f01f 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -49,6 +49,7 @@
 	unsigned nonblocking:1;		/* Don't get stuck on request queues */
 	unsigned encountered_congestion:1; /* An output: a queue is full */
 	unsigned for_kupdate:1;		/* A kupdate writeback */
+	unsigned for_background:1;	/* A background writeback */
 	unsigned for_reclaim:1;		/* Invoked from the page allocator */
 	unsigned range_cyclic:1;	/* range_start is cyclic */
 	unsigned more_io:1;		/* more io to be dispatched */
diff --git a/include/linux/x25.h b/include/linux/x25.h
index d035e4e..6450a7f 100644
--- a/include/linux/x25.h
+++ b/include/linux/x25.h
@@ -25,6 +25,7 @@
 #define SIOCX25SENDCALLACCPT    (SIOCPROTOPRIVATE + 9)
 #define SIOCX25GDTEFACILITIES (SIOCPROTOPRIVATE + 10)
 #define SIOCX25SDTEFACILITIES (SIOCPROTOPRIVATE + 11)
+#define SIOCX25SCAUSEDIAG	(SIOCPROTOPRIVATE + 12)
 
 /*
  *	Values for {get,set}sockopt.
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 2d4ec15..29e04be 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -10,8 +10,7 @@
 /* Structure to encapsulate addresses. I do not want to use
  * "standard" structure. My apologies.
  */
-typedef union
-{
+typedef union {
 	__be32		a4;
 	__be32		a6[4];
 } xfrm_address_t;
@@ -20,8 +19,7 @@
  * the state by (spi,daddr,ah/esp) or to store information about
  * spi, protocol and tunnel address on output.
  */
-struct xfrm_id
-{
+struct xfrm_id {
 	xfrm_address_t	daddr;
 	__be32		spi;
 	__u8		proto;
@@ -45,8 +43,7 @@
 
 /* Selector, used as selector both on policy rules (SPD) and SAs. */
 
-struct xfrm_selector
-{
+struct xfrm_selector {
 	xfrm_address_t	daddr;
 	xfrm_address_t	saddr;
 	__be16	dport;
@@ -63,8 +60,7 @@
 
 #define XFRM_INF (~(__u64)0)
 
-struct xfrm_lifetime_cfg
-{
+struct xfrm_lifetime_cfg {
 	__u64	soft_byte_limit;
 	__u64	hard_byte_limit;
 	__u64	soft_packet_limit;
@@ -75,16 +71,14 @@
 	__u64	hard_use_expires_seconds;
 };
 
-struct xfrm_lifetime_cur
-{
+struct xfrm_lifetime_cur {
 	__u64	bytes;
 	__u64	packets;
 	__u64	add_time;
 	__u64	use_time;
 };
 
-struct xfrm_replay_state
-{
+struct xfrm_replay_state {
 	__u32	oseq;
 	__u32	seq;
 	__u32	bitmap;
@@ -96,6 +90,13 @@
 	char		alg_key[0];
 };
 
+struct xfrm_algo_auth {
+	char		alg_name[64];
+	unsigned int	alg_key_len;    /* in bits */
+	unsigned int	alg_trunc_len;  /* in bits */
+	char		alg_key[0];
+};
+
 struct xfrm_algo_aead {
 	char		alg_name[64];
 	unsigned int	alg_key_len;	/* in bits */
@@ -109,16 +110,14 @@
 	__u32	integrity_failed;
 };
 
-enum
-{
+enum {
 	XFRM_POLICY_TYPE_MAIN	= 0,
 	XFRM_POLICY_TYPE_SUB	= 1,
 	XFRM_POLICY_TYPE_MAX	= 2,
 	XFRM_POLICY_TYPE_ANY	= 255
 };
 
-enum
-{
+enum {
 	XFRM_POLICY_IN	= 0,
 	XFRM_POLICY_OUT	= 1,
 	XFRM_POLICY_FWD	= 2,
@@ -126,8 +125,7 @@
 	XFRM_POLICY_MAX	= 3
 };
 
-enum
-{
+enum {
 	XFRM_SHARE_ANY,		/* No limitations */
 	XFRM_SHARE_SESSION,	/* For this session only */
 	XFRM_SHARE_USER,	/* For this user only */
@@ -283,6 +281,7 @@
 	XFRMA_MIGRATE,
 	XFRMA_ALG_AEAD,		/* struct xfrm_algo_aead */
 	XFRMA_KMADDRESS,        /* struct xfrm_user_kmaddress */
+	XFRMA_ALG_AUTH_TRUNC,	/* struct xfrm_algo_auth */
 	__XFRMA_MAX
 
 #define XFRMA_MAX (__XFRMA_MAX - 1)
diff --git a/include/net/ah.h b/include/net/ah.h
index ae1c322..f0129f7 100644
--- a/include/net/ah.h
+++ b/include/net/ah.h
@@ -1,43 +1,20 @@
 #ifndef _NET_AH_H
 #define _NET_AH_H
 
-#include <linux/crypto.h>
-#include <net/xfrm.h>
+#include <linux/skbuff.h>
 
 /* This is the maximum truncated ICV length that we know of. */
 #define MAX_AH_AUTH_LEN	12
 
-struct ah_data
-{
-	u8			*work_icv;
+struct crypto_ahash;
+
+struct ah_data {
 	int			icv_full_len;
 	int			icv_trunc_len;
 
-	struct crypto_hash	*tfm;
+	struct crypto_ahash	*ahash;
 };
 
-static inline int ah_mac_digest(struct ah_data *ahp, struct sk_buff *skb,
-				u8 *auth_data)
-{
-	struct hash_desc desc;
-	int err;
-
-	desc.tfm = ahp->tfm;
-	desc.flags = 0;
-
-	memset(auth_data, 0, ahp->icv_trunc_len);
-	err = crypto_hash_init(&desc);
-	if (unlikely(err))
-		goto out;
-	err = skb_icv_walk(skb, &desc, 0, skb->len, crypto_hash_update);
-	if (unlikely(err))
-		goto out;
-	err = crypto_hash_final(&desc, ahp->work_icv);
-
-out:
-	return err;
-}
-
 struct ip_auth_hdr;
 
 static inline struct ip_auth_hdr *ip_auth_hdr(const struct sk_buff *skb)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 718394e..04a6908 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -121,7 +121,7 @@
 	rwlock_t          lock;
 };
 
-int  bt_sock_register(int proto, struct net_proto_family *ops);
+int  bt_sock_register(int proto, const struct net_proto_family *ops);
 int  bt_sock_unregister(int proto);
 void bt_sock_link(struct bt_sock_list *l, struct sock *s);
 void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 7b640ae..7b86094a 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -367,22 +367,6 @@
 	}
 }
 
-/* ----- HCI tasks ----- */
-static inline void hci_sched_cmd(struct hci_dev *hdev)
-{
-	tasklet_schedule(&hdev->cmd_task);
-}
-
-static inline void hci_sched_rx(struct hci_dev *hdev)
-{
-	tasklet_schedule(&hdev->rx_task);
-}
-
-static inline void hci_sched_tx(struct hci_dev *hdev)
-{
-	tasklet_schedule(&hdev->tx_task);
-}
-
 /* ----- HCI Devices ----- */
 static inline void __hci_dev_put(struct hci_dev *d)
 {
@@ -437,28 +421,7 @@
 
 void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
 
-/* Receive frame from HCI drivers */
-static inline int hci_recv_frame(struct sk_buff *skb)
-{
-	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
-	if (!hdev || (!test_bit(HCI_UP, &hdev->flags) 
-			&& !test_bit(HCI_INIT, &hdev->flags))) {
-		kfree_skb(skb);
-		return -ENXIO;
-	}
-
-	/* Incomming skb */
-	bt_cb(skb)->incoming = 1;
-
-	/* Time stamp */
-	__net_timestamp(skb);
-
-	/* Queue frame for rx task */
-	skb_queue_tail(&hdev->rx_q, skb);
-	hci_sched_rx(hdev);
-	return 0;
-}
-
+int hci_recv_frame(struct sk_buff *skb);
 int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count);
 
 int hci_register_sysfs(struct hci_dev *hdev);
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 9516f4b..17a689f 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -324,7 +324,6 @@
 
 	__u8		next_tx_seq;
 	__u8		expected_ack_seq;
-	__u8		req_seq;
 	__u8		expected_tx_seq;
 	__u8		buffer_seq;
 	__u8		buffer_seq_srej;
@@ -375,6 +374,7 @@
 #define L2CAP_CONN_SEND_PBIT       0x10
 #define L2CAP_CONN_REMOTE_BUSY     0x20
 #define L2CAP_CONN_LOCAL_BUSY      0x40
+#define L2CAP_CONN_REJ_ACT         0x80
 
 #define __mod_retrans_timer() mod_timer(&l2cap_pi(sk)->retrans_timer, \
 		jiffies +  msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3d874c6..0884b9a 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -206,10 +206,12 @@
  * struct vif_params - describes virtual interface parameters
  * @mesh_id: mesh ID to use
  * @mesh_id_len: length of the mesh ID
+ * @use_4addr: use 4-address frames
  */
 struct vif_params {
        u8 *mesh_id;
        int mesh_id_len;
+       int use_4addr;
 };
 
 /**
@@ -233,6 +235,35 @@
 };
 
 /**
+ * enum survey_info_flags - survey information flags
+ *
+ * Used by the driver to indicate which info in &struct survey_info
+ * it has filled in during the get_survey().
+ */
+enum survey_info_flags {
+	SURVEY_INFO_NOISE_DBM = 1<<0,
+};
+
+/**
+ * struct survey_info - channel survey response
+ *
+ * Used by dump_survey() to report back per-channel survey information.
+ *
+ * @channel: the channel this survey record reports, mandatory
+ * @filled: bitflag of flags from &enum survey_info_flags
+ * @noise: channel noise in dBm. This and all following fields are
+ *     optional
+ *
+ * This structure can later be expanded with things like
+ * channel duty cycle etc.
+ */
+struct survey_info {
+	struct ieee80211_channel *channel;
+	u32 filled;
+	s8 noise;
+};
+
+/**
  * struct beacon_parameters - beacon parameters
  *
  * Used to configure the beacon for an interface.
@@ -418,7 +449,7 @@
  * in during get_station() or dump_station().
  *
  * MPATH_INFO_FRAME_QLEN: @frame_qlen filled
- * MPATH_INFO_DSN: @dsn filled
+ * MPATH_INFO_SN: @sn filled
  * MPATH_INFO_METRIC: @metric filled
  * MPATH_INFO_EXPTIME: @exptime filled
  * MPATH_INFO_DISCOVERY_TIMEOUT: @discovery_timeout filled
@@ -427,7 +458,7 @@
  */
 enum mpath_info_flags {
 	MPATH_INFO_FRAME_QLEN		= BIT(0),
-	MPATH_INFO_DSN			= BIT(1),
+	MPATH_INFO_SN			= BIT(1),
 	MPATH_INFO_METRIC		= BIT(2),
 	MPATH_INFO_EXPTIME		= BIT(3),
 	MPATH_INFO_DISCOVERY_TIMEOUT	= BIT(4),
@@ -442,7 +473,7 @@
  *
  * @filled: bitfield of flags from &enum mpath_info_flags
  * @frame_qlen: number of queued frames for this destination
- * @dsn: destination sequence number
+ * @sn: target sequence number
  * @metric: metric (cost) of this mesh path
  * @exptime: expiration time for the mesh path from now, in msecs
  * @flags: mesh path flags
@@ -456,7 +487,7 @@
 struct mpath_info {
 	u32 filled;
 	u32 frame_qlen;
-	u32 dsn;
+	u32 sn;
 	u32 metric;
 	u32 exptime;
 	u32 discovery_timeout;
@@ -506,6 +537,7 @@
 	u32 dot11MeshHWMPactivePathTimeout;
 	u16 dot11MeshHWMPpreqMinInterval;
 	u16 dot11MeshHWMPnetDiameterTraversalTime;
+	u8  dot11MeshHWMPRootMode;
 };
 
 /**
@@ -839,6 +871,19 @@
 	u32 fixed;   /* fixed bitrate, 0 == not fixed */
 	u32 maxrate; /* in kbps, 0 == no limit */
 };
+/**
+ * struct cfg80211_pmksa - PMK Security Association
+ *
+ * This structure is passed to the set/del_pmksa() method for PMKSA
+ * caching.
+ *
+ * @bssid: The AP's BSSID.
+ * @pmkid: The PMK material itself.
+ */
+struct cfg80211_pmksa {
+	u8 *bssid;
+	u8 *pmkid;
+};
 
 /**
  * struct cfg80211_ops - backend description for wireless configuration
@@ -941,7 +986,16 @@
  * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting
  *	functions to adjust rfkill hw state
  *
+ * @dump_survey: get site survey information.
+ *
  * @testmode_cmd: run a test mode command
+ *
+ * @set_pmksa: Cache a PMKID for a BSSID. This is mostly useful for fullmac
+ *	devices running firmwares capable of generating the (re) association
+ *	RSN IE. It allows for faster roaming between WPA2 BSSIDs.
+ * @del_pmksa: Delete a cached PMKID.
+ * @flush_pmksa: Flush all cached PMKIDs.
+ *
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy);
@@ -1060,6 +1114,15 @@
 				    const u8 *peer,
 				    const struct cfg80211_bitrate_mask *mask);
 
+	int	(*dump_survey)(struct wiphy *wiphy, struct net_device *netdev,
+			int idx, struct survey_info *info);
+
+	int	(*set_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+			     struct cfg80211_pmksa *pmksa);
+	int	(*del_pmksa)(struct wiphy *wiphy, struct net_device *netdev,
+			     struct cfg80211_pmksa *pmksa);
+	int	(*flush_pmksa)(struct wiphy *wiphy, struct net_device *netdev);
+
 	/* some temporary stuff to finish wext */
 	int	(*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
 				  bool enabled, int timeout);
@@ -1071,27 +1134,50 @@
  */
 
 /**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
+ * enum wiphy_flags - wiphy capability flags
+ *
+ * @WIPHY_FLAG_CUSTOM_REGULATORY:  tells us the driver for this device
  * 	has its own custom regulatory domain and cannot identify the
  * 	ISO / IEC 3166 alpha2 it belongs to. When this is enabled
  * 	we will disregard the first regulatory hint (when the
  * 	initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * 	regulatory domain settings until it gets its own regulatory domain
- * 	via its regulatory_hint(). After its gets its own regulatory domain
- * 	it will only allow further regulatory domain settings to further
- * 	enhance compliance. For example if channel 13 and 14 are disabled
- * 	by this regulatory domain no user regulatory domain can enable these
- * 	channels at a later time. This can be used for devices which do not
- * 	have calibration information gauranteed for frequencies or settings
- * 	outside of its regulatory domain.
- * @disable_beacon_hints: enable this if your driver needs to ensure that
- *	passive scan flags and beaconing flags may not be lifted by cfg80211
- *	due to regulatory beacon hints. For more information on beacon
+ * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
+ *	ignore regulatory domain settings until it gets its own regulatory
+ *	domain via its regulatory_hint(). After its gets its own regulatory
+ *	domain it will only allow further regulatory domain settings to
+ *	further enhance compliance. For example if channel 13 and 14 are
+ *	disabled by this regulatory domain no user regulatory domain can
+ *	enable these channels at a later time. This can be used for devices
+ *	which do not have calibration information gauranteed for frequencies
+ *	or settings outside of its regulatory domain.
+ * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
+ *	that passive scan flags and beaconing flags may not be lifted by
+ *	cfg80211 due to regulatory beacon hints. For more information on beacon
  *	hints read the documenation for regulatory_hint_found_beacon()
+ * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
+ *	wiphy at all
+ * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
+ *	by default -- this flag will be set depending on the kernel's default
+ *	on wiphy_new(), but can be changed by the driver if it has a good
+ *	reason to override the default
+ * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
+ *	on a VLAN interface)
+ * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ */
+enum wiphy_flags {
+	WIPHY_FLAG_CUSTOM_REGULATORY	= BIT(0),
+	WIPHY_FLAG_STRICT_REGULATORY	= BIT(1),
+	WIPHY_FLAG_DISABLE_BEACON_HINTS	= BIT(2),
+	WIPHY_FLAG_NETNS_OK		= BIT(3),
+	WIPHY_FLAG_PS_ON_BY_DEFAULT	= BIT(4),
+	WIPHY_FLAG_4ADDR_AP		= BIT(5),
+	WIPHY_FLAG_4ADDR_STATION	= BIT(6),
+};
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
  * @reg_notifier: the driver's regulatory notification callback
  * @regd: the driver's regulatory domain, if one was requested via
  * 	the regulatory_hint() API. This can be used by the driver
@@ -1106,11 +1192,6 @@
  *	-1 = fragmentation disabled, only odd values >= 256 used
  * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
  * @net: the network namespace this wiphy currently lives in
- * @netnsok: if set to false, do not allow changing the netns of this
- *	wiphy at all
- * @ps_default: default for powersave, will be set depending on the
- *	kernel's default on wiphy_new(), but can be changed by the
- *	driver if it has a good reason to override the default
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1121,12 +1202,7 @@
 	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
 	u16 interface_modes;
 
-	bool custom_regulatory;
-	bool strict_regulatory;
-	bool disable_beacon_hints;
-
-	bool netnsok;
-	bool ps_default;
+	u32 flags;
 
 	enum cfg80211_signal_type signal_type;
 
@@ -1142,6 +1218,11 @@
 	u32 frag_threshold;
 	u32 rts_threshold;
 
+	char fw_version[ETHTOOL_BUSINFO_LEN];
+	u32 hw_version;
+
+	u8 max_num_pmkids;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered
@@ -1171,6 +1252,10 @@
 	struct net *_net;
 #endif
 
+#ifdef CONFIG_CFG80211_WEXT
+	const struct iw_handler_def *wext;
+#endif
+
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
 
@@ -1314,6 +1399,10 @@
  * @ssid_len: (private) Used by the internal configuration code
  * @wext: (private) Used by the internal wireless extensions compat code
  * @wext_bssid: (private) Used by the internal wireless extensions compat code
+ * @use_4addr: indicates 4addr mode is used on this interface, must be
+ *	set by driver (if supported) on add_interface BEFORE registering the
+ *	netdev and may otherwise be used by driver read-only, will be update
+ *	by cfg80211 on change_interface
  */
 struct wireless_dev {
 	struct wiphy *wiphy;
@@ -1327,6 +1416,8 @@
 
 	struct work_struct cleanup_work;
 
+	bool use_4addr;
+
 	/* currently used for IBSS and SME - might be rearranged later */
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	u8 ssid_len;
@@ -1345,7 +1436,7 @@
 	struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
 	struct cfg80211_internal_bss *current_bss; /* associated / joined */
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
 		struct cfg80211_ibss_params ibss;
@@ -1776,6 +1867,18 @@
 void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
 
 /**
+ * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * When a pending authentication had no action yet, the driver may decide
+ * to not send a deauth frame, but in that case must calls this function
+ * to tell cfg80211 about this decision. It is only valid to call this
+ * function within the deauth() callback.
+ */
+void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
+
+/**
  * cfg80211_send_rx_assoc - notification of processed association
  * @dev: network device
  * @buf: (re)association response frame (header + body)
@@ -1802,30 +1905,45 @@
  * @dev: network device
  * @buf: deauthentication frame (header + body)
  * @len: length of the frame data
- * @cookie: cookie from ->deauth if called within that callback,
- *	%NULL otherwise
  *
  * This function is called whenever deauthentication has been processed in
  * station mode. This includes both received deauthentication frames and
  * locally generated ones. This function may sleep.
  */
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
-			  void *cookie);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
  * cfg80211_send_disassoc - notification of processed disassociation
  * @dev: network device
  * @buf: disassociation response frame (header + body)
  * @len: length of the frame data
- * @cookie: cookie from ->disassoc if called within that callback,
- *	%NULL otherwise
  *
  * This function is called whenever disassociation has been processed in
  * station mode. This includes both received disassociation frames and locally
  * generated ones. This function may sleep.
  */
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
-			    void *cookie);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
+	size_t len);
 
 /**
  * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
diff --git a/include/net/compat.h b/include/net/compat.h
index 7c30028..3c7d4e3 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -18,6 +18,11 @@
 	compat_uint_t	msg_flags;
 };
 
+struct compat_mmsghdr {
+	struct compat_msghdr msg_hdr;
+	compat_uint_t        msg_len;
+};
+
 struct compat_cmsghdr {
 	compat_size_t	cmsg_len;
 	compat_int_t	cmsg_level;
@@ -28,13 +33,20 @@
 extern int compat_sock_get_timestampns(struct sock *, struct timespec __user *);
 
 #else /* defined(CONFIG_COMPAT) */
-#define compat_msghdr	msghdr		/* to avoid compiler warnings */
+/*
+ * To avoid compiler warnings:
+ */
+#define compat_msghdr	msghdr
+#define compat_mmsghdr	mmsghdr
 #endif /* defined(CONFIG_COMPAT) */
 
 extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
 extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr *, int);
 extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
 extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_recvmmsg(int, struct compat_mmsghdr __user *,
+					   unsigned, unsigned,
+					   struct timespec __user *);
 extern asmlinkage long compat_sys_getsockopt(int, int, int, char __user *, int __user *);
 extern int put_cmsg_compat(struct msghdr*, int, int, int, void *);
 
diff --git a/include/net/dn_dev.h b/include/net/dn_dev.h
index cee4682..511a459 100644
--- a/include/net/dn_dev.h
+++ b/include/net/dn_dev.h
@@ -75,7 +75,6 @@
 	unsigned long t3;         /* Default value of t3                */
 	int priority;             /* Priority to be a router            */
 	char *name;               /* Name for sysctl                    */
-	int ctl_name;             /* Index for sysctl                   */
 	int  (*up)(struct net_device *);
 	void (*down)(struct net_device *);
 	void (*timer3)(struct net_device *, struct dn_ifaddr *ifa);
@@ -97,16 +96,14 @@
 	unsigned long uptime;     /* Time device went up in jiffies */
 };
 
-struct dn_short_packet
-{
+struct dn_short_packet {
 	__u8    msgflg;
 	__le16 dstnode;
 	__le16 srcnode;
 	__u8   forward;
 } __attribute__((packed));
 
-struct dn_long_packet
-{
+struct dn_long_packet {
 	__u8   msgflg;
 	__u8   d_area;
 	__u8   d_subarea;
@@ -122,8 +119,7 @@
 
 /*------------------------- DRP - Routing messages ---------------------*/
 
-struct endnode_hello_message
-{
+struct endnode_hello_message {
 	__u8   msgflg;
 	__u8   tiver[3];
 	__u8   id[6];
@@ -138,8 +134,7 @@
 	__u8   data[2];
 } __attribute__((packed));
 
-struct rtnode_hello_message
-{
+struct rtnode_hello_message {
 	__u8   msgflg;
 	__u8   tiver[3];
 	__u8   id[6];
diff --git a/include/net/dn_fib.h b/include/net/dn_fib.h
index c378be7..52da6c3 100644
--- a/include/net/dn_fib.h
+++ b/include/net/dn_fib.h
@@ -4,8 +4,7 @@
 /* WARNING: The ordering of these elements must match ordering
  *          of RTA_* rtnetlink attribute numbers.
  */
-struct dn_kern_rta
-{
+struct dn_kern_rta {
         void            *rta_dst;
         void            *rta_src;
         int             *rta_iif;
diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h
index 96e816b..17d43d2 100644
--- a/include/net/dn_nsp.h
+++ b/include/net/dn_nsp.h
@@ -70,30 +70,26 @@
 
 /* Data Messages    (data segment/interrupt/link service)               */
 
-struct nsp_data_seg_msg
-{
+struct nsp_data_seg_msg {
 	__u8   msgflg;
 	__le16 dstaddr;
 	__le16 srcaddr;
 } __attribute__((packed));
 
-struct nsp_data_opt_msg
-{
+struct nsp_data_opt_msg {
 	__le16 acknum;
 	__le16 segnum;
 	__le16 lsflgs;
 } __attribute__((packed));
 
-struct nsp_data_opt_msg1
-{
+struct nsp_data_opt_msg1 {
 	__le16 acknum;
 	__le16 segnum;
 } __attribute__((packed));
 
 
 /* Acknowledgment Message (data/other data)                             */
-struct nsp_data_ack_msg
-{
+struct nsp_data_ack_msg {
 	__u8   msgflg;
 	__le16 dstaddr;
 	__le16 srcaddr;
@@ -101,16 +97,14 @@
 } __attribute__((packed));
 
 /* Connect Acknowledgment Message */
-struct  nsp_conn_ack_msg
-{
+struct  nsp_conn_ack_msg {
 	__u8 msgflg;
 	__le16 dstaddr;
 } __attribute__((packed));
 
 
 /* Connect Initiate/Retransmit Initiate/Connect Confirm */
-struct  nsp_conn_init_msg
-{
+struct  nsp_conn_init_msg {
 	__u8   msgflg;
 #define NSP_CI      0x18            /* Connect Initiate     */
 #define NSP_RCI     0x68            /* Retrans. Conn Init   */
@@ -126,8 +120,7 @@
 } __attribute__((packed));
 
 /* Disconnect Initiate/Disconnect Confirm */
-struct  nsp_disconn_init_msg
-{
+struct  nsp_disconn_init_msg {
 	__u8   msgflg;
 	__le16 dstaddr;
 	__le16 srcaddr;
@@ -136,8 +129,7 @@
 
 
 
-struct  srcobj_fmt
-{
+struct  srcobj_fmt {
 	__u8   format;
 	__u8   task;
 	__le16 grpcode;
diff --git a/include/net/dst.h b/include/net/dst.h
index 5a900dd..387cb3c 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -36,8 +36,7 @@
 
 struct sk_buff;
 
-struct dst_entry
-{
+struct dst_entry {
 	struct rcu_head		rcu_head;
 	struct dst_entry	*child;
 	struct net_device       *dev;
@@ -111,6 +110,12 @@
 	return dst->metrics[metric-1];
 }
 
+static inline u32
+dst_feature(const struct dst_entry *dst, u32 feature)
+{
+	return (dst ? dst_metric(dst, RTAX_FEATURES) & feature : 0);
+}
+
 static inline u32 dst_mtu(const struct dst_entry *dst)
 {
 	u32 mtu = dst_metric(dst, RTAX_MTU);
@@ -136,7 +141,7 @@
 static inline u32
 dst_allfrag(const struct dst_entry *dst)
 {
-	int ret = dst_metric(dst, RTAX_FEATURES) & RTAX_FEATURE_ALLFRAG;
+	int ret = dst_feature(dst,  RTAX_FEATURE_ALLFRAG);
 	/* Yes, _exactly_. This is paranoia. */
 	barrier();
 	return ret;
@@ -222,11 +227,19 @@
 		neigh_confirm(dst->neighbour);
 }
 
-static inline void dst_negative_advice(struct dst_entry **dst_p)
+static inline void dst_negative_advice(struct dst_entry **dst_p,
+				       struct sock *sk)
 {
 	struct dst_entry * dst = *dst_p;
-	if (dst && dst->ops->negative_advice)
+	if (dst && dst->ops->negative_advice) {
 		*dst_p = dst->ops->negative_advice(dst);
+
+		if (dst != *dst_p) {
+			extern void sk_reset_txq(struct sock *sk);
+
+			sk_reset_txq(sk);
+		}
+	}
 }
 
 static inline void dst_link_failure(struct sk_buff *skb)
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index ca4b2e8..c07ac96 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -7,12 +7,11 @@
 #include <net/flow.h>
 #include <net/rtnetlink.h>
 
-struct fib_rule
-{
+struct fib_rule {
 	struct list_head	list;
 	atomic_t		refcnt;
-	int			ifindex;
-	char			ifname[IFNAMSIZ];
+	int			iifindex;
+	int			oifindex;
 	u32			mark;
 	u32			mark_mask;
 	u32			pref;
@@ -21,19 +20,19 @@
 	u8			action;
 	u32			target;
 	struct fib_rule *	ctarget;
+	char			iifname[IFNAMSIZ];
+	char			oifname[IFNAMSIZ];
 	struct rcu_head		rcu;
 	struct net *		fr_net;
 };
 
-struct fib_lookup_arg
-{
+struct fib_lookup_arg {
 	void			*lookup_ptr;
 	void			*result;
 	struct fib_rule		*rule;
 };
 
-struct fib_rules_ops
-{
+struct fib_rules_ops {
 	int			family;
 	struct list_head	list;
 	int			rule_size;
@@ -67,10 +66,12 @@
 	struct list_head	rules_list;
 	struct module		*owner;
 	struct net		*fro_net;
+	struct rcu_head		rcu;
 };
 
 #define FRA_GENERIC_POLICY \
-	[FRA_IFNAME]	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
+	[FRA_IIFNAME]	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
+	[FRA_OIFNAME]	= { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, \
 	[FRA_PRIORITY]	= { .type = NLA_U32 }, \
 	[FRA_FWMARK]	= { .type = NLA_U32 }, \
 	[FRA_FWMASK]	= { .type = NLA_U32 }, \
@@ -102,7 +103,7 @@
 	return frh->table;
 }
 
-extern int fib_rules_register(struct fib_rules_ops *);
+extern struct fib_rules_ops *fib_rules_register(struct fib_rules_ops *, struct net *);
 extern void fib_rules_unregister(struct fib_rules_ops *);
 extern void                     fib_rules_cleanup_ops(struct fib_rules_ops *);
 
diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h
index c148855..fa15771 100644
--- a/include/net/gen_stats.h
+++ b/include/net/gen_stats.h
@@ -6,8 +6,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/pkt_sched.h>
 
-struct gnet_dump
-{
+struct gnet_dump {
 	spinlock_t *      lock;
 	struct sk_buff *  skb;
 	struct nlattr *   tail;
@@ -30,6 +29,7 @@
 extern int gnet_stats_copy_basic(struct gnet_dump *d,
 				 struct gnet_stats_basic_packed *b);
 extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
+				    const struct gnet_stats_basic_packed *b,
 				    struct gnet_stats_rate_est *r);
 extern int gnet_stats_copy_queue(struct gnet_dump *d,
 				 struct gnet_stats_queue *q);
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 2a1c0687..eb551ba 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -13,8 +13,7 @@
  * @list: list entry for linking
  * @family: pointer to family, need not be set before registering
  */
-struct genl_multicast_group
-{
+struct genl_multicast_group {
 	struct genl_family	*family;	/* private */
 	struct list_head	list;		/* private */
 	char			name[GENL_NAMSIZ];
@@ -35,8 +34,7 @@
  * @family_list: family list
  * @mcast_groups: multicast groups list
  */
-struct genl_family
-{
+struct genl_family {
 	unsigned int		id;
 	unsigned int		hdrsize;
 	char			name[GENL_NAMSIZ];
@@ -58,8 +56,7 @@
  * @userhdr: user specific header
  * @attrs: netlink attributes
  */
-struct genl_info
-{
+struct genl_info {
 	u32			snd_seq;
 	u32			snd_pid;
 	struct nlmsghdr *	nlhdr;
@@ -102,8 +99,7 @@
  * @done: completion callback for dumps
  * @ops_list: operations list
  */
-struct genl_ops
-{
+struct genl_ops {
 	u8			cmd;
 	unsigned int		flags;
 	const struct nla_policy	*policy;
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 23c3f3d..9d3d86a 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -80,7 +80,7 @@
 				 * Additional extensions are made
 				 * by setting bit 31.
 				 */
-};
+} __packed;
 
 /* Name                                 Data type    Units
  * ----                                 ---------    -----
diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h
index 5dc6a61..5743055 100644
--- a/include/net/ieee802154_netdev.h
+++ b/include/net/ieee802154_netdev.h
@@ -74,8 +74,12 @@
 #define IEEE802154_MAC_SCAN_PASSIVE	2
 #define IEEE802154_MAC_SCAN_ORPHAN	3
 
+struct wpan_phy;
 /*
  * This should be located at net_device->ml_priv
+ *
+ * get_phy should increment the reference counting on returned phy.
+ * Use wpan_wpy_put to put that reference.
  */
 struct ieee802154_mlme_ops {
 	int (*assoc_req)(struct net_device *dev,
@@ -94,18 +98,20 @@
 	int (*scan_req)(struct net_device *dev,
 			u8 type, u32 channels, u8 page, u8 duration);
 
+	struct wpan_phy *(*get_phy)(const struct net_device *dev);
+
 	/*
 	 * FIXME: these should become the part of PIB/MIB interface.
 	 * However we still don't have IB interface of any kind
 	 */
-	u16 (*get_pan_id)(struct net_device *dev);
-	u16 (*get_short_addr)(struct net_device *dev);
-	u8 (*get_dsn)(struct net_device *dev);
-	u8 (*get_bsn)(struct net_device *dev);
+	u16 (*get_pan_id)(const struct net_device *dev);
+	u16 (*get_short_addr)(const struct net_device *dev);
+	u8 (*get_dsn)(const struct net_device *dev);
+	u8 (*get_bsn)(const struct net_device *dev);
 };
 
 static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops(
-		struct net_device *dev)
+		const struct net_device *dev)
 {
 	return dev->ml_priv;
 }
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index 38b7813..e9d69d1 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -32,8 +32,7 @@
 
 #ifdef __KERNEL__
 
-struct inet6_ifaddr 
-{
+struct inet6_ifaddr {
 	struct in6_addr		addr;
 	__u32			prefix_len;
 	
@@ -67,8 +66,7 @@
 	int			dead;
 };
 
-struct ip6_sf_socklist
-{
+struct ip6_sf_socklist {
 	unsigned int		sl_max;
 	unsigned int		sl_count;
 	struct in6_addr		sl_addr[0];
@@ -79,8 +77,7 @@
 
 #define IP6_SFBLOCK	10	/* allocate this many at once */
 
-struct ipv6_mc_socklist
-{
+struct ipv6_mc_socklist {
 	struct in6_addr		addr;
 	int			ifindex;
 	struct ipv6_mc_socklist *next;
@@ -89,8 +86,7 @@
 	struct ip6_sf_socklist	*sflist;
 };
 
-struct ip6_sf_list
-{
+struct ip6_sf_list {
 	struct ip6_sf_list	*sf_next;
 	struct in6_addr		sf_addr;
 	unsigned long		sf_count[2];	/* include/exclude counts */
@@ -105,8 +101,7 @@
 #define MAF_NOREPORT		0x08
 #define MAF_GSQUERY		0x10
 
-struct ifmcaddr6
-{
+struct ifmcaddr6 {
 	struct in6_addr		mca_addr;
 	struct inet6_dev	*idev;
 	struct ifmcaddr6	*next;
@@ -126,15 +121,13 @@
 
 /* Anycast stuff */
 
-struct ipv6_ac_socklist
-{
+struct ipv6_ac_socklist {
 	struct in6_addr		acl_addr;
 	int			acl_ifindex;
 	struct ipv6_ac_socklist *acl_next;
 };
 
-struct ifacaddr6
-{
+struct ifacaddr6 {
 	struct in6_addr		aca_addr;
 	struct inet6_dev	*aca_idev;
 	struct rt6_info		*aca_rt;
@@ -157,8 +150,7 @@
 	DEFINE_SNMP_STAT(struct icmpv6msg_mib, icmpv6msg);
 };
 
-struct inet6_dev 
-{
+struct inet6_dev {
 	struct net_device		*dev;
 
 	struct inet6_ifaddr	*addr_list;
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index 22c73a7..92838d3 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -46,8 +46,8 @@
 	const struct ipv6_pinfo *np = inet6_sk(sk);
 	const struct in6_addr *laddr = &np->rcv_saddr;
 	const struct in6_addr *faddr = &np->daddr;
-	const __u16 lport = inet->num;
-	const __be16 fport = inet->dport;
+	const __u16 lport = inet->inet_num;
+	const __be16 fport = inet->inet_dport;
 	struct net *net = sock_net(sk);
 
 	return inet6_ehashfn(net, laddr, lport, faddr, fport);
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index d522dcf..41cbddd 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -92,8 +92,8 @@
 	return read_pnet(&ib->ib_net);
 }
 
-#define inet_bind_bucket_for_each(tb, node, head) \
-	hlist_for_each_entry(tb, node, head, node)
+#define inet_bind_bucket_for_each(tb, pos, head) \
+	hlist_for_each_entry(tb, pos, head, node)
 
 struct inet_bind_hashbucket {
 	spinlock_t		lock;
@@ -125,7 +125,7 @@
 	 */
 	struct inet_ehash_bucket	*ehash;
 	spinlock_t			*ehash_locks;
-	unsigned int			ehash_size;
+	unsigned int			ehash_mask;
 	unsigned int			ehash_locks_mask;
 
 	/* Ok, let's try this, I give up, we do need a local binding
@@ -158,7 +158,7 @@
 	struct inet_hashinfo *hashinfo,
 	unsigned int hash)
 {
-	return &hashinfo->ehash[hash & (hashinfo->ehash_size - 1)];
+	return &hashinfo->ehash[hash & hashinfo->ehash_mask];
 }
 
 static inline spinlock_t *inet_ehash_lockp(
@@ -241,7 +241,7 @@
 
 static inline int inet_sk_listen_hashfn(const struct sock *sk)
 {
-	return inet_lhashfn(sock_net(sk), inet_sk(sk)->num);
+	return inet_lhashfn(sock_net(sk), inet_sk(sk)->inet_num);
 }
 
 /* Caller must disable local BH processing. */
@@ -301,8 +301,8 @@
 #endif /* __BIG_ENDIAN */
 #define INET_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net)) &&	\
-	 ((*((__addrpair *)&(inet_sk(__sk)->daddr))) == (__cookie))	&&	\
-	 ((*((__portpair *)&(inet_sk(__sk)->dport))) == (__ports))	&&	\
+	 ((*((__addrpair *)&(inet_sk(__sk)->inet_daddr))) == (__cookie))  &&	\
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports))   &&	\
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 #define INET_TW_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net)) &&	\
@@ -313,9 +313,9 @@
 #define INET_ADDR_COOKIE(__name, __saddr, __daddr)
 #define INET_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)	\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net))	&&	\
-	 (inet_sk(__sk)->daddr		== (__saddr))		&&	\
-	 (inet_sk(__sk)->rcv_saddr	== (__daddr))		&&	\
-	 ((*((__portpair *)&(inet_sk(__sk)->dport))) == (__ports))	&&	\
+	 (inet_sk(__sk)->inet_daddr	== (__saddr))		&&	\
+	 (inet_sk(__sk)->inet_rcv_saddr	== (__daddr))		&&	\
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports))	&&	\
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 #define INET_TW_MATCH(__sk, __net, __hash,__cookie, __saddr, __daddr, __ports, __dif)	\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net))	&&	\
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 47004f3..bd4c53f 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -93,14 +93,14 @@
  *
  * @sk - ancestor class
  * @pinet6 - pointer to IPv6 control block
- * @daddr - Foreign IPv4 addr
- * @rcv_saddr - Bound local IPv4 addr
- * @dport - Destination port
- * @num - Local port
- * @saddr - Sending source
+ * @inet_daddr - Foreign IPv4 addr
+ * @inet_rcv_saddr - Bound local IPv4 addr
+ * @inet_dport - Destination port
+ * @inet_num - Local port
+ * @inet_saddr - Sending source
  * @uc_ttl - Unicast TTL
- * @sport - Source port
- * @id - ID counter for DF pkts
+ * @inet_sport - Source port
+ * @inet_id - ID counter for DF pkts
  * @tos - TOS
  * @mc_ttl - Multicasting TTL
  * @is_icsk - is this an inet_connection_sock?
@@ -115,16 +115,16 @@
 	struct ipv6_pinfo	*pinet6;
 #endif
 	/* Socket demultiplex comparisons on incoming packets. */
-	__be32			daddr;
-	__be32			rcv_saddr;
-	__be16			dport;
-	__u16			num;
-	__be32			saddr;
+	__be32			inet_daddr;
+	__be32			inet_rcv_saddr;
+	__be16			inet_dport;
+	__u16			inet_num;
+	__be32			inet_saddr;
 	__s16			uc_ttl;
 	__u16			cmsg_flags;
 	struct ip_options	*opt;
-	__be16			sport;
-	__u16			id;
+	__be16			inet_sport;
+	__u16			inet_id;
 	__u8			tos;
 	__u8			mc_ttl;
 	__u8			pmtudisc;
@@ -190,10 +190,10 @@
 static inline int inet_sk_ehashfn(const struct sock *sk)
 {
 	const struct inet_sock *inet = inet_sk(sk);
-	const __be32 laddr = inet->rcv_saddr;
-	const __u16 lport = inet->num;
-	const __be32 faddr = inet->daddr;
-	const __be16 fport = inet->dport;
+	const __be32 laddr = inet->inet_rcv_saddr;
+	const __u16 lport = inet->inet_num;
+	const __be32 faddr = inet->inet_daddr;
+	const __be16 fport = inet->inet_dport;
 	struct net *net = sock_net(sk);
 
 	return inet_ehashfn(net, laddr, lport, faddr, fport);
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index f93ad90..b801ade 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -194,11 +194,13 @@
 static inline __be32 inet_rcv_saddr(const struct sock *sk)
 {
 	return likely(sk->sk_state != TCP_TIME_WAIT) ?
-		inet_sk(sk)->rcv_saddr : inet_twsk(sk)->tw_rcv_saddr;
+		inet_sk(sk)->inet_rcv_saddr : inet_twsk(sk)->tw_rcv_saddr;
 }
 
 extern void inet_twsk_put(struct inet_timewait_sock *tw);
 
+extern int inet_twsk_unhash(struct inet_timewait_sock *tw);
+
 extern struct inet_timewait_sock *inet_twsk_alloc(const struct sock *sk,
 						  const int state);
 
@@ -212,14 +214,14 @@
 extern void inet_twsk_deschedule(struct inet_timewait_sock *tw,
 				 struct inet_timewait_death_row *twdr);
 
-extern void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+extern void inet_twsk_purge(struct inet_hashinfo *hashinfo,
 			    struct inet_timewait_death_row *twdr, int family);
 
 static inline
 struct net *twsk_net(const struct inet_timewait_sock *twsk)
 {
 #ifdef CONFIG_NET_NS
-	return twsk->tw_net;
+	return rcu_dereference(twsk->tw_net);
 #else
 	return &init_net;
 #endif
@@ -229,7 +231,7 @@
 void twsk_net_set(struct inet_timewait_sock *twsk, struct net *net)
 {
 #ifdef CONFIG_NET_NS
-	twsk->tw_net = net;
+	rcu_assign_pointer(twsk->tw_net, net);
 #endif
 }
 #endif	/* _INET_TIMEWAIT_SOCK_ */
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index 15e1f8fe..87b1df0 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -13,20 +13,19 @@
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
 
-struct inet_peer
-{
+struct inet_peer {
 	/* group together avl_left,avl_right,v4daddr to speedup lookups */
 	struct inet_peer	*avl_left, *avl_right;
 	__be32			v4daddr;	/* peer's address */
-	__u16			avl_height;
-	__u16			ip_id_count;	/* IP ID for the next packet */
+	__u32			avl_height;
 	struct list_head	unused;
 	__u32			dtime;		/* the time of last use of not
 						 * referenced entries */
 	atomic_t		refcnt;
 	atomic_t		rid;		/* Frag reception counter */
+	atomic_t		ip_id_count;	/* IP ID for the next packet */
 	__u32			tcp_ts;
-	unsigned long		tcp_ts_stamp;
+	__u32			tcp_ts_stamp;
 };
 
 void			inet_initpeers(void) __init;
@@ -37,17 +36,11 @@
 /* can be called from BH context or outside */
 extern void inet_putpeer(struct inet_peer *p);
 
-extern spinlock_t inet_peer_idlock;
 /* can be called with or without local BH being disabled */
 static inline __u16	inet_getid(struct inet_peer *p, int more)
 {
-	__u16 id;
-
-	spin_lock_bh(&inet_peer_idlock);
-	id = p->ip_id_count;
-	p->ip_id_count += 1 + more;
-	spin_unlock_bh(&inet_peer_idlock);
-	return id;
+	more++;
+	return atomic_add_return(more, &p->ip_id_count) - more;
 }
 
 #endif /* _NET_INETPEER_H */
diff --git a/include/net/ip.h b/include/net/ip.h
index 2f47e54..e6b9d12 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -33,8 +33,7 @@
 
 struct sock;
 
-struct inet_skb_parm
-{
+struct inet_skb_parm {
 	struct ip_options	opt;		/* Compiled IP options		*/
 	unsigned char		flags;
 
@@ -50,8 +49,7 @@
 	return ip_hdr(skb)->ihl * 4;
 }
 
-struct ipcm_cookie
-{
+struct ipcm_cookie {
 	__be32			addr;
 	int			oif;
 	struct ip_options	*opt;
@@ -60,8 +58,7 @@
 
 #define IPCB(skb) ((struct inet_skb_parm*)((skb)->cb))
 
-struct ip_ra_chain
-{
+struct ip_ra_chain {
 	struct ip_ra_chain	*next;
 	struct sock		*sk;
 	void			(*destructor)(struct sock *);
@@ -159,8 +156,7 @@
 void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
 		   unsigned int len); 
 
-struct ipv4_config
-{
+struct ipv4_config {
 	int	log_martians;
 	int	no_pmtu_disc;
 };
@@ -240,8 +236,8 @@
 		 * does not change, they drop every other packet in
 		 * a TCP stream using header compression.
 		 */
-		iph->id = (sk && inet_sk(sk)->daddr) ?
-					htons(inet_sk(sk)->id++) : 0;
+		iph->id = (sk && inet_sk(sk)->inet_daddr) ?
+					htons(inet_sk(sk)->inet_id++) : 0;
 	} else
 		__ip_select_ident(iph, dst, 0);
 }
@@ -249,9 +245,9 @@
 static inline void ip_select_ident_more(struct iphdr *iph, struct dst_entry *dst, struct sock *sk, int more)
 {
 	if (iph->frag_off & htons(IP_DF)) {
-		if (sk && inet_sk(sk)->daddr) {
-			iph->id = htons(inet_sk(sk)->id);
-			inet_sk(sk)->id += 1 + more;
+		if (sk && inet_sk(sk)->inet_daddr) {
+			iph->id = htons(inet_sk(sk)->inet_id);
+			inet_sk(sk)->inet_id += 1 + more;
 		} else
 			iph->id = 0;
 	} else
@@ -317,7 +313,7 @@
 
 static __inline__ void inet_reset_saddr(struct sock *sk)
 {
-	inet_sk(sk)->rcv_saddr = inet_sk(sk)->saddr = 0;
+	inet_sk(sk)->inet_rcv_saddr = inet_sk(sk)->inet_saddr = 0;
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	if (sk->sk_family == PF_INET6) {
 		struct ipv6_pinfo *np = inet6_sk(sk);
@@ -336,8 +332,7 @@
  *	Functions provided by ip_fragment.c
  */
 
-enum ip_defrag_users
-{
+enum ip_defrag_users {
 	IP_DEFRAG_LOCAL_DELIVER,
 	IP_DEFRAG_CALL_RA_CHAIN,
 	IP_DEFRAG_CONNTRACK_IN,
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 15b492a..2578081 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -30,8 +30,7 @@
 
 struct rt6_info;
 
-struct fib6_config
-{
+struct fib6_config {
 	u32		fc_table;
 	u32		fc_metric;
 	int		fc_dst_len;
@@ -51,8 +50,7 @@
 	struct nl_info	fc_nlinfo;
 };
 
-struct fib6_node
-{
+struct fib6_node {
 	struct fib6_node	*parent;
 	struct fib6_node	*left;
 	struct fib6_node	*right;
@@ -78,16 +76,14 @@
  *
  */
 
-struct rt6key
-{
+struct rt6key {
 	struct in6_addr	addr;
 	int		plen;
 };
 
 struct fib6_table;
 
-struct rt6_info
-{
+struct rt6_info {
 	union {
 		struct dst_entry	dst;
 	} u;
@@ -127,8 +123,7 @@
 	return ((struct rt6_info *)dst)->rt6i_idev;
 }
 
-struct fib6_walker_t
-{
+struct fib6_walker_t {
 	struct fib6_walker_t *prev, *next;
 	struct fib6_node *root, *node;
 	struct rt6_info *leaf;
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 0e1b8ae..4a808de 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -103,8 +103,7 @@
 
 struct netlink_callback;
 
-struct rt6_rtnl_dump_arg
-{
+struct rt6_rtnl_dump_arg {
 	struct sk_buff *skb;
 	struct netlink_callback *cb;
 	struct net *net;
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 4d22fab..c93f94e 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -144,18 +144,21 @@
 	struct hlist_node tb_hlist;
 	u32		tb_id;
 	int		tb_default;
-	int		(*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res);
-	int		(*tb_insert)(struct fib_table *, struct fib_config *);
-	int		(*tb_delete)(struct fib_table *, struct fib_config *);
-	int		(*tb_dump)(struct fib_table *table, struct sk_buff *skb,
-				     struct netlink_callback *cb);
-	int		(*tb_flush)(struct fib_table *table);
-	void		(*tb_select_default)(struct fib_table *table,
-					     const struct flowi *flp, struct fib_result *res);
-
 	unsigned char	tb_data[0];
 };
 
+extern int fib_table_lookup(struct fib_table *tb, const struct flowi *flp,
+			    struct fib_result *res);
+extern int fib_table_insert(struct fib_table *, struct fib_config *);
+extern int fib_table_delete(struct fib_table *, struct fib_config *);
+extern int fib_table_dump(struct fib_table *table, struct sk_buff *skb,
+			  struct netlink_callback *cb);
+extern int fib_table_flush(struct fib_table *table);
+extern void fib_table_select_default(struct fib_table *table,
+				     const struct flowi *flp,
+				     struct fib_result *res);
+
+
 #ifndef CONFIG_IP_MULTIPLE_TABLES
 
 #define TABLE_LOCAL_INDEX	0
@@ -182,11 +185,11 @@
 	struct fib_table *table;
 
 	table = fib_get_table(net, RT_TABLE_LOCAL);
-	if (!table->tb_lookup(table, flp, res))
+	if (!fib_table_lookup(table, flp, res))
 		return 0;
 
 	table = fib_get_table(net, RT_TABLE_MAIN);
-	if (!table->tb_lookup(table, flp, res))
+	if (!fib_table_lookup(table, flp, res))
 		return 0;
 	return -ENETUNREACH;
 }
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 98978e7..8dc3296 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -251,8 +251,7 @@
 	u32			outbps;
 };
 
-struct ip_vs_stats
-{
+struct ip_vs_stats {
 	struct ip_vs_stats_user	ustats;         /* statistics */
 	struct ip_vs_estimator	est;		/* estimator */
 
@@ -518,8 +517,7 @@
 /*
  *	The application module object (a.k.a. app incarnation)
  */
-struct ip_vs_app
-{
+struct ip_vs_app {
 	struct list_head	a_list;		/* member in app list */
 	int			type;		/* IP_VS_APP_TYPE_xxx */
 	char			*name;		/* application module name */
diff --git a/include/net/ipip.h b/include/net/ipip.h
index 87acf8f..11e8513 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -7,8 +7,15 @@
 /* Keep error state on tunnel for 30 sec */
 #define IPTUNNEL_ERR_TIMEO	(30*HZ)
 
-struct ip_tunnel
-{
+/* 6rd prefix/relay information */
+struct ip_tunnel_6rd_parm {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	u16			prefixlen;
+	u16			relay_prefixlen;
+};
+
+struct ip_tunnel {
 	struct ip_tunnel	*next;
 	struct net_device	*dev;
 
@@ -23,15 +30,19 @@
 
 	struct ip_tunnel_parm	parms;
 
+	/* for SIT */
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel_6rd_parm	ip6rd;
+#endif
 	struct ip_tunnel_prl_entry	*prl;		/* potential router list */
 	unsigned int			prl_count;	/* # of entries in PRL */
 };
 
-struct ip_tunnel_prl_entry
-{
+struct ip_tunnel_prl_entry {
 	struct ip_tunnel_prl_entry	*next;
 	__be32				addr;
 	u16				flags;
+	struct rcu_head			rcu_head;
 };
 
 #define IPTUNNEL_XMIT() do {						\
@@ -42,9 +53,9 @@
 	ip_select_ident(iph, &rt->u.dst, NULL);				\
 									\
 	err = ip_local_out(skb);					\
-	if (net_xmit_eval(err) == 0) {					\
-		stats->tx_bytes += pkt_len;				\
-		stats->tx_packets++;					\
+	if (likely(net_xmit_eval(err) == 0)) {				\
+		txq->tx_bytes += pkt_len;				\
+		txq->tx_packets++;					\
 	} else {							\
 		stats->tx_errors++;					\
 		stats->tx_aborted_errors++;				\
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 8c31d8a..92db861 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -160,8 +160,7 @@
 #define ICMP6MSGIN_INC_STATS_BH(net, idev, field)	\
 	_DEVINC(net, icmpv6msg, _BH, idev, field)
 
-struct ip6_ra_chain
-{
+struct ip6_ra_chain {
 	struct ip6_ra_chain	*next;
 	struct sock		*sk;
 	int			sel;
@@ -176,8 +175,7 @@
    ancillary data and passed to IPv6.
  */
 
-struct ipv6_txoptions
-{
+struct ipv6_txoptions {
 	/* Length of this structure */
 	int			tot_len;
 
@@ -194,8 +192,7 @@
 	/* Option buffer, as read by IPV6_PKTOPTIONS, starts here. */
 };
 
-struct ip6_flowlabel
-{
+struct ip6_flowlabel {
 	struct ip6_flowlabel	*next;
 	__be32			label;
 	atomic_t		users;
@@ -212,8 +209,7 @@
 #define IPV6_FLOWINFO_MASK	cpu_to_be32(0x0FFFFFFF)
 #define IPV6_FLOWLABEL_MASK	cpu_to_be32(0x000FFFFF)
 
-struct ipv6_fl_socklist
-{
+struct ipv6_fl_socklist {
 	struct ipv6_fl_socklist	*next;
 	struct ip6_flowlabel	*fl;
 };
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
index e9054a2..b2b98f3 100644
--- a/include/net/iw_handler.h
+++ b/include/net/iw_handler.h
@@ -300,8 +300,7 @@
  * This struct is also my long term insurance. I can add new fields here
  * without breaking the prototype of iw_handler...
  */
-struct iw_request_info
-{
+struct iw_request_info {
 	__u16		cmd;		/* Wireless Extension command */
 	__u16		flags;		/* More to come ;-) */
 };
@@ -321,20 +320,20 @@
  * shared by all driver instances... Same for the members...
  * This will be linked from net_device in <linux/netdevice.h>
  */
-struct iw_handler_def
-{
-	/* Number of handlers defined (more precisely, index of the
-	 * last defined handler + 1) */
-	__u16			num_standard;
-	__u16			num_private;
-	/* Number of private arg description */
-	__u16			num_private_args;
+struct iw_handler_def {
 
 	/* Array of handlers for standard ioctls
 	 * We will call dev->wireless_handlers->standard[ioctl - SIOCSIWCOMMIT]
 	 */
 	const iw_handler *	standard;
+	/* Number of handlers defined (more precisely, index of the
+	 * last defined handler + 1) */
+	__u16			num_standard;
 
+#ifdef CONFIG_WEXT_PRIV
+	__u16			num_private;
+	/* Number of private arg description */
+	__u16			num_private_args;
 	/* Array of handlers for private ioctls
 	 * Will call dev->wireless_handlers->private[ioctl - SIOCIWFIRSTPRIV]
 	 */
@@ -344,6 +343,7 @@
 	 * can put it in any order you want and should not leave holes...
 	 * We will automatically export that to user space... */
 	const struct iw_priv_args *	private_args;
+#endif
 
 	/* New location of get_wireless_stats, to de-bloat struct net_device.
 	 * The old pointer in struct net_device will be gradually phased
@@ -370,8 +370,7 @@
 /*
  * Describe how a standard IOCTL looks like.
  */
-struct iw_ioctl_description
-{
+struct iw_ioctl_description {
 	__u8	header_type;		/* NULL, iw_point or other */
 	__u8	token_type;		/* Future */
 	__u16	token_size;		/* Granularity of payload */
@@ -393,8 +392,7 @@
 /*
  * Instance specific spy data, i.e. addresses spied and quality for them.
  */
-struct iw_spy_data
-{
+struct iw_spy_data {
 	/* --- Standard spy support --- */
 	int			spy_number;
 	u_char			spy_address[IW_MAX_SPY][ETH_ALEN];
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c75b960..2aff490 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -219,7 +219,7 @@
  *
  * These flags are used with the @flags member of &ieee80211_tx_info.
  *
- * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
+ * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
  * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
  *	number to this frame, taking care of not overwriting the fragment
  *	number and increasing the sequence number only when the
@@ -390,10 +390,12 @@
  * @control: union for control data
  * @status: union for status data
  * @driver_data: array of driver_data pointers
- * @ampdu_ack_len: number of aggregated frames.
+ * @ampdu_ack_len: number of acked aggregated frames.
  * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ampdu_ack_map: block ack bit map for the aggregation.
  * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
+ * @ampdu_len: number of aggregated frames.
+ * 	relevant only if IEEE80211_TX_STATUS_AMPDU was set.
  * @ack_signal: signal strength of the ACK frame
  */
 struct ieee80211_tx_info {
@@ -428,7 +430,8 @@
 			u8 ampdu_ack_len;
 			u64 ampdu_ack_map;
 			int ack_signal;
-			/* 8 bytes free */
+			u8 ampdu_len;
+			/* 7 bytes free */
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[
@@ -494,7 +497,6 @@
  * @RX_FLAG_MMIC_ERROR: Michael MIC error was reported on this frame.
  *	Use together with %RX_FLAG_MMIC_STRIPPED.
  * @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
- * @RX_FLAG_RADIOTAP: This frame starts with a radiotap header.
  * @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
  *	verification has been done by the hardware.
  * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
@@ -511,11 +513,13 @@
  * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index
  * @RX_FLAG_40MHZ: HT40 (40 MHz) was used
  * @RX_FLAG_SHORT_GI: Short guard interval was used
+ * @RX_FLAG_INTERNAL_CMTR: set internally after frame was reported
+ *	on cooked monitor to avoid double-reporting it for multiple
+ *	virtual interfaces
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR	= 1<<0,
 	RX_FLAG_DECRYPTED	= 1<<1,
-	RX_FLAG_RADIOTAP	= 1<<2,
 	RX_FLAG_MMIC_STRIPPED	= 1<<3,
 	RX_FLAG_IV_STRIPPED	= 1<<4,
 	RX_FLAG_FAILED_FCS_CRC	= 1<<5,
@@ -525,6 +529,7 @@
 	RX_FLAG_HT		= 1<<9,
 	RX_FLAG_40MHZ		= 1<<10,
 	RX_FLAG_SHORT_GI	= 1<<11,
+	RX_FLAG_INTERNAL_CMTR	= 1<<12,
 };
 
 /**
@@ -554,7 +559,7 @@
 	int freq;
 	int signal;
 	int noise;
-	int qual;
+	int __deprecated qual;
 	int antenna;
 	int rate_idx;
 	int flag;
@@ -565,7 +570,9 @@
  *
  * Flags to define PHY configuration options
  *
- * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
+ * @IEEE80211_CONF_MONITOR: there's a monitor interface present -- use this
+ *	to determine for example whether to calculate timestamps for packets
+ *	or not, do not use instead of filter flags!
  * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only)
  * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set
  *	the driver should be prepared to handle configuration requests but
@@ -574,7 +581,7 @@
  *	it can also be unset in that case when monitor interfaces are active.
  */
 enum ieee80211_conf_flags {
-	IEEE80211_CONF_RADIOTAP		= (1<<0),
+	IEEE80211_CONF_MONITOR		= (1<<0),
 	IEEE80211_CONF_PS		= (1<<1),
 	IEEE80211_CONF_IDLE		= (1<<2),
 };
@@ -584,7 +591,7 @@
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
  * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
- * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
+ * @IEEE80211_CONF_CHANGE_MONITOR: the monitor flag changed
  * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed
@@ -593,7 +600,7 @@
  */
 enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_LISTEN_INTERVAL	= BIT(2),
-	IEEE80211_CONF_CHANGE_RADIOTAP		= BIT(3),
+	IEEE80211_CONF_CHANGE_MONITOR		= BIT(3),
 	IEEE80211_CONF_CHANGE_PS		= BIT(4),
 	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
 	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
@@ -852,6 +859,19 @@
  * any particular flags. There are some exceptions to this rule,
  * however, so you are advised to review these flags carefully.
  *
+ * @IEEE80211_HW_HAS_RATE_CONTROL:
+ *	The hardware or firmware includes rate control, and cannot be
+ *	controlled by the stack. As such, no rate control algorithm
+ *	should be instantiated, and the TX rate reported to userspace
+ *	will be taken from the TX status instead of the rate control
+ *	algorithm.
+ *	Note that this requires that the driver implement a number of
+ *	callbacks so it has the correct information, it needs to have
+ *	the @set_rts_threshold callback and must look at the BSS config
+ *	@use_cts_prot for G/N protection, @use_short_slot for slot
+ *	timing in 2.4 GHz and @use_short_preamble for preambles for
+ *	CCK frames.
+ *
  * @IEEE80211_HW_RX_INCLUDES_FCS:
  *	Indicates that received frames passed to the stack include
  *	the FCS at the end.
@@ -910,6 +930,7 @@
  *	avoid waking up cpu.
  */
 enum ieee80211_hw_flags {
+	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
 	IEEE80211_HW_RX_INCLUDES_FCS			= 1<<1,
 	IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING	= 1<<2,
 	IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE		= 1<<3,
@@ -1283,6 +1304,12 @@
  *
  * These flags are used with the ampdu_action() callback in
  * &struct ieee80211_ops to indicate which action is needed.
+ *
+ * Note that drivers MUST be able to deal with a TX aggregation
+ * session being stopped even before they OK'ed starting it by
+ * calling ieee80211_start_tx_ba_cb(_irqsafe), because the peer
+ * might receive the addBA frame and send a delBA right away!
+ *
  * @IEEE80211_AMPDU_RX_START: start Rx aggregation
  * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation
  * @IEEE80211_AMPDU_TX_START: start Tx aggregation
@@ -1505,6 +1532,7 @@
 	void (*reset_tsf)(struct ieee80211_hw *hw);
 	int (*tx_last_beacon)(struct ieee80211_hw *hw);
 	int (*ampdu_action)(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
 			    enum ieee80211_ampdu_mlme_action action,
 			    struct ieee80211_sta *sta, u16 tid, u16 *ssn);
 
@@ -1661,15 +1689,14 @@
  * ieee80211_rx - receive frame
  *
  * Use this function to hand received frames to mac80211. The receive
- * buffer in @skb must start with an IEEE 802.11 header or a radiotap
- * header if %RX_FLAG_RADIOTAP is set in the @status flags.
+ * buffer in @skb must start with an IEEE 802.11 header.
  *
  * This function may not be called in IRQ context. Calls to this function
- * for a single hardware must be synchronized against each other. Calls
- * to this function and ieee80211_rx_irqsafe() may not be mixed for a
- * single hardware.
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware.
  *
- * Note that right now, this function must be called with softirqs disabled.
+ * In process context use instead ieee80211_rx_ni().
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
@@ -1682,8 +1709,8 @@
  * Like ieee80211_rx() but can be called in IRQ context
  * (internally defers to a tasklet.)
  *
- * Calls to this function and ieee80211_rx() may not be mixed for a
- * single hardware.
+ * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
+ * be mixed for a single hardware.
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
@@ -1691,6 +1718,26 @@
 void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
 
 /**
+ * ieee80211_rx_ni - receive frame (in process context)
+ *
+ * Like ieee80211_rx() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
+ * not be mixed for a single hardware.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
+				   struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_rx(hw, skb);
+	local_bh_enable();
+}
+
+/**
  * ieee80211_tx_status - transmit status callback
  *
  * Call this function for all transmitted frames after they have been
@@ -1724,19 +1771,45 @@
 				 struct sk_buff *skb);
 
 /**
+ * ieee80211_beacon_get_tim - beacon generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
+ * @tim_offset: pointer to variable that will receive the TIM IE offset.
+ *	Set to 0 if invalid (in non-AP modes).
+ * @tim_length: pointer to variable that will receive the TIM IE length,
+ *	(including the ID and length bytes!).
+ *	Set to 0 if invalid (in non-AP modes).
+ *
+ * If the driver implements beaconing modes, it must use this function to
+ * obtain the beacon frame/template.
+ *
+ * If the beacon frames are generated by the host system (i.e., not in
+ * hardware/firmware), the driver uses this function to get each beacon
+ * frame from mac80211 -- it is responsible for calling this function
+ * before the beacon is needed (e.g. based on hardware interrupt).
+ *
+ * If the beacon frames are generated by the device, then the driver
+ * must use the returned beacon as the template and change the TIM IE
+ * according to the current DTIM parameters/TIM bitmap.
+ *
+ * The driver is responsible for freeing the returned skb.
+ */
+struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 u16 *tim_offset, u16 *tim_length);
+
+/**
  * ieee80211_beacon_get - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
  * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf.
  *
- * If the beacon frames are generated by the host system (i.e., not in
- * hardware/firmware), the low-level driver uses this function to receive
- * the next beacon frame from the 802.11 code. The low-level is responsible
- * for calling this function before beacon data is needed (e.g., based on
- * hardware interrupt). Returned skb is used only once and low-level driver
- * is responsible for freeing it.
+ * See ieee80211_beacon_get_tim().
  */
-struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif);
+static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
+						   struct ieee80211_vif *vif)
+{
+	return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
+}
 
 /**
  * ieee80211_rts_get - RTS frame generation function
@@ -1981,8 +2054,7 @@
 
 /**
  * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @ra: receiver address of the BA session recipient
+ * @sta: the station for which to start a BA session
  * @tid: the TID to BA on.
  *
  * Return: success if addBA request was sent, failure otherwise
@@ -1991,22 +2063,22 @@
  * the need to start aggregation on a certain RA/TID, the session level
  * will be managed by the mac80211.
  */
-int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid);
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
 
 /**
  * ieee80211_start_tx_ba_cb - low level driver ready to aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
  * @ra: receiver address of the BA session recipient.
  * @tid: the TID to BA on.
  *
  * This function must be called by low level driver once it has
  * finished with preparations for the BA session.
  */
-void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid);
+void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid);
 
 /**
  * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
  * @ra: receiver address of the BA session recipient.
  * @tid: the TID to BA on.
  *
@@ -2014,13 +2086,12 @@
  * finished with preparations for the BA session.
  * This version of the function is IRQ-safe.
  */
-void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
 				      u16 tid);
 
 /**
  * ieee80211_stop_tx_ba_session - Stop a Block Ack session.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @ra: receiver address of the BA session recipient
+ * @sta: the station whose BA session to stop
  * @tid: the TID to stop BA.
  * @initiator: if indicates initiator DELBA frame will be sent.
  *
@@ -2030,24 +2101,23 @@
  * the need to stop aggregation on a certain RA/TID, the session level
  * will be managed by the mac80211.
  */
-int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
-				 u8 *ra, u16 tid,
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
 				 enum ieee80211_back_parties initiator);
 
 /**
  * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
  * @ra: receiver address of the BA session recipient.
  * @tid: the desired TID to BA on.
  *
  * This function must be called by low level driver once it has
  * finished with preparations for the BA session tear down.
  */
-void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid);
+void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid);
 
 /**
  * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
  * @ra: receiver address of the BA session recipient.
  * @tid: the desired TID to BA on.
  *
@@ -2055,20 +2125,73 @@
  * finished with preparations for the BA session tear down.
  * This version of the function is IRQ-safe.
  */
-void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
 				     u16 tid);
 
 /**
  * ieee80211_find_sta - find a station
  *
+ * @vif: virtual interface to look for station on
+ * @addr: station's address
+ *
+ * This function must be called under RCU lock and the
+ * resulting pointer is only valid under RCU lock as well.
+ */
+struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
+					 const u8 *addr);
+
+/**
+ * ieee80211_find_sta_by_hw - find a station on hardware
+ *
  * @hw: pointer as obtained from ieee80211_alloc_hw()
  * @addr: station's address
  *
  * This function must be called under RCU lock and the
  * resulting pointer is only valid under RCU lock as well.
+ *
+ * NOTE: This function should not be used! When mac80211 is converted
+ *	 internally to properly keep track of stations on multiple
+ *	 virtual interfaces, it will not always know which station to
+ *	 return here since a single address might be used by multiple
+ *	 logical stations (e.g. consider a station connecting to another
+ *	 BSSID on the same AP hardware without disconnecting first).
+ *
+ * DO NOT USE THIS FUNCTION.
  */
-struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
-					 const u8 *addr);
+struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
+					       const u8 *addr);
+
+/**
+ * ieee80211_sta_block_awake - block station from waking up
+ * @hw: the hardware
+ * @pubsta: the station
+ * @block: whether to block or unblock
+ *
+ * Some devices require that all frames that are on the queues
+ * for a specific station that went to sleep are flushed before
+ * a poll response or frames after the station woke up can be
+ * delivered to that it. Note that such frames must be rejected
+ * by the driver as filtered, with the appropriate status flag.
+ *
+ * This function allows implementing this mode in a race-free
+ * manner.
+ *
+ * To do this, a driver must keep track of the number of frames
+ * still enqueued for a specific station. If this number is not
+ * zero when the station goes to sleep, the driver must call
+ * this function to force mac80211 to consider the station to
+ * be asleep regardless of the station's actual state. Once the
+ * number of outstanding frames reaches zero, the driver must
+ * call this function again to unblock the station. That will
+ * cause mac80211 to be able to send ps-poll responses, and if
+ * the station queried in the meantime then frames will also
+ * be sent out as a result of this. Additionally, the driver
+ * will be notified that the station woke up some time after
+ * it is unblocked, regardless of whether the station actually
+ * woke up while blocked or not.
+ */
+void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
+			       struct ieee80211_sta *pubsta, bool block);
 
 /**
  * ieee80211_beacon_loss - inform hardware does not receive beacons
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 3817fda..0302f31 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -37,8 +37,7 @@
 
 struct neighbour;
 
-struct neigh_parms
-{
+struct neigh_parms {
 #ifdef CONFIG_NET_NS
 	struct net *net;
 #endif
@@ -70,8 +69,7 @@
 	int	locktime;
 };
 
-struct neigh_statistics
-{
+struct neigh_statistics {
 	unsigned long allocs;		/* number of allocated neighs */
 	unsigned long destroys;		/* number of destroyed neighs */
 	unsigned long hash_grows;	/* number of hash resizes */
@@ -97,8 +95,7 @@
 		preempt_enable();					\
 	} while (0)
 
-struct neighbour
-{
+struct neighbour {
 	struct neighbour	*next;
 	struct neigh_table	*tbl;
 	struct neigh_parms	*parms;
@@ -122,8 +119,7 @@
 	u8			primary_key[0];
 };
 
-struct neigh_ops
-{
+struct neigh_ops {
 	int			family;
 	void			(*solicit)(struct neighbour *, struct sk_buff*);
 	void			(*error_report)(struct neighbour *, struct sk_buff*);
@@ -133,8 +129,7 @@
 	int			(*queue_xmit)(struct sk_buff*);
 };
 
-struct pneigh_entry
-{
+struct pneigh_entry {
 	struct pneigh_entry	*next;
 #ifdef CONFIG_NET_NS
 	struct net		*net;
@@ -149,8 +144,7 @@
  */
 
 
-struct neigh_table
-{
+struct neigh_table {
 	struct neigh_table	*next;
 	int			family;
 	int			entry_size;
@@ -264,8 +258,7 @@
 						      struct neigh_parms *p,
 						      int p_id, int pdev_id,
 						      char *p_name,
-						      proc_handler *proc_handler,
-						      ctl_handler *strategy);
+						      proc_handler *proc_handler);
 extern void			neigh_sysctl_unregister(struct neigh_parms *p);
 
 static inline void __neigh_parms_put(struct neigh_parms *parms)
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index a120284..f307e13 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -28,6 +28,10 @@
 struct net_generic;
 struct sock;
 
+
+#define NETDEV_HASHBITS    8
+#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
+
 struct net {
 	atomic_t		count;		/* To decided when the network
 						 *  namespace should be freed.
@@ -38,7 +42,8 @@
 						 */
 #endif
 	struct list_head	list;		/* list of network namespaces */
-	struct work_struct	work;		/* work struct for freeing */
+	struct list_head	cleanup_list;	/* namespaces on death row */
+	struct list_head	exit_list;	/* Use only net_mutex */
 
 	struct proc_dir_entry 	*proc_net;
 	struct proc_dir_entry 	*proc_net_stat;
@@ -80,7 +85,7 @@
 #ifdef CONFIG_XFRM
 	struct netns_xfrm	xfrm;
 #endif
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_WEXT_CORE
 	struct sk_buff_head	wext_nlevents;
 #endif
 	struct net_generic	*gen;
@@ -232,6 +237,9 @@
 	struct list_head list;
 	int (*init)(struct net *net);
 	void (*exit)(struct net *net);
+	void (*exit_batch)(struct list_head *net_exit_list);
+	int *id;
+	size_t size;
 };
 
 /*
@@ -255,12 +263,8 @@
  */
 extern int register_pernet_subsys(struct pernet_operations *);
 extern void unregister_pernet_subsys(struct pernet_operations *);
-extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
-extern void unregister_pernet_gen_subsys(int id, struct pernet_operations *);
 extern int register_pernet_device(struct pernet_operations *);
 extern void unregister_pernet_device(struct pernet_operations *);
-extern int register_pernet_gen_device(int *id, struct pernet_operations *);
-extern void unregister_pernet_gen_device(int id, struct pernet_operations *);
 
 struct ctl_path;
 struct ctl_table;
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index 4f20d58..475facc 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -13,8 +13,7 @@
 #include <net/netfilter/nf_conntrack_extend.h>
 
 /* Connection tracking event types */
-enum ip_conntrack_events
-{
+enum ip_conntrack_events {
 	IPCT_NEW		= 0,	/* new conntrack */
 	IPCT_RELATED		= 1,	/* related conntrack */
 	IPCT_DESTROY		= 2,	/* destroyed conntrack */
diff --git a/include/net/netfilter/nf_conntrack_expect.h b/include/net/netfilter/nf_conntrack_expect.h
index a965280..9a2b9cb 100644
--- a/include/net/netfilter/nf_conntrack_expect.h
+++ b/include/net/netfilter/nf_conntrack_expect.h
@@ -9,8 +9,7 @@
 extern unsigned int nf_ct_expect_hsize;
 extern unsigned int nf_ct_expect_max;
 
-struct nf_conntrack_expect
-{
+struct nf_conntrack_expect {
 	/* Conntrack expectation list member */
 	struct hlist_node lnode;
 
@@ -64,8 +63,7 @@
 #endif
 }
 
-struct nf_conntrack_expect_policy
-{
+struct nf_conntrack_expect_policy {
 	unsigned int	max_expected;
 	unsigned int	timeout;
 };
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index 7f8fc5d..e192dc1 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -3,8 +3,7 @@
 
 #include <net/netfilter/nf_conntrack.h>
 
-enum nf_ct_ext_id
-{
+enum nf_ct_ext_id {
 	NF_CT_EXT_HELPER,
 	NF_CT_EXT_NAT,
 	NF_CT_EXT_ACCT,
@@ -65,8 +64,7 @@
 
 #define NF_CT_EXT_F_PREALLOC	0x0001
 
-struct nf_ct_ext_type
-{
+struct nf_ct_ext_type {
 	/* Destroys relationships (can be NULL). */
 	void (*destroy)(struct nf_conn *ct);
 	/* Called when realloacted (can be NULL).
diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h
index 1b70680..d015de9 100644
--- a/include/net/netfilter/nf_conntrack_helper.h
+++ b/include/net/netfilter/nf_conntrack_helper.h
@@ -16,8 +16,7 @@
 
 #define NF_CT_HELPER_NAME_LEN	16
 
-struct nf_conntrack_helper
-{
+struct nf_conntrack_helper {
 	struct hlist_node hnode;	/* Internal use. */
 
 	const char *name;		/* name of the module */
diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h
index 9f99d36..a754761 100644
--- a/include/net/netfilter/nf_conntrack_l3proto.h
+++ b/include/net/netfilter/nf_conntrack_l3proto.h
@@ -16,8 +16,7 @@
 #include <linux/seq_file.h>
 #include <net/netfilter/nf_conntrack.h>
 
-struct nf_conntrack_l3proto
-{
+struct nf_conntrack_l3proto {
 	/* L3 Protocol Family number. ex) PF_INET */
 	u_int16_t l3proto;
 
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
index 3767fb4..ca6dcf3 100644
--- a/include/net/netfilter/nf_conntrack_l4proto.h
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -15,8 +15,7 @@
 
 struct seq_file;
 
-struct nf_conntrack_l4proto
-{
+struct nf_conntrack_l4proto {
 	/* L3 Protocol number. */
 	u_int16_t l3proto;
 
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
index 2628c15..4ee44c8 100644
--- a/include/net/netfilter/nf_conntrack_tuple.h
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -26,8 +26,7 @@
 
 /* The protocol-specific manipulable parts of the tuple: always in
    network order! */
-union nf_conntrack_man_proto
-{
+union nf_conntrack_man_proto {
 	/* Add other protocols here. */
 	__be16 all;
 
@@ -52,8 +51,7 @@
 };
 
 /* The manipulable part of the tuple. */
-struct nf_conntrack_man
-{
+struct nf_conntrack_man {
 	union nf_inet_addr u3;
 	union nf_conntrack_man_proto u;
 	/* Layer 3 protocol */
@@ -61,8 +59,7 @@
 };
 
 /* This contains the information to distinguish a connection. */
-struct nf_conntrack_tuple
-{
+struct nf_conntrack_tuple {
 	struct nf_conntrack_man src;
 
 	/* These are the parts of the tuple which are fixed. */
@@ -100,8 +97,7 @@
 	} dst;
 };
 
-struct nf_conntrack_tuple_mask
-{
+struct nf_conntrack_tuple_mask {
 	struct {
 		union nf_inet_addr u3;
 		union nf_conntrack_man_proto u;
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index 8df0b7f..f5f09f03 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -5,8 +5,7 @@
 
 #define NF_NAT_MAPPING_TYPE_MAX_NAMELEN 16
 
-enum nf_nat_manip_type
-{
+enum nf_nat_manip_type {
 	IP_NAT_MANIP_SRC,
 	IP_NAT_MANIP_DST
 };
@@ -30,8 +29,7 @@
 };
 
 /* Single range specification. */
-struct nf_nat_range
-{
+struct nf_nat_range {
 	/* Set to OR of flags above. */
 	unsigned int flags;
 
@@ -43,8 +41,7 @@
 };
 
 /* For backwards compat: don't use in modern code. */
-struct nf_nat_multi_range_compat
-{
+struct nf_nat_multi_range_compat {
 	unsigned int rangesize; /* Must be 1. */
 
 	/* hangs off end. */
@@ -57,8 +54,7 @@
 #include <net/netfilter/nf_conntrack_extend.h>
 
 /* per conntrack: nat application helper private data */
-union nf_conntrack_nat_help
-{
+union nf_conntrack_nat_help {
 	/* insert nat helper private data here */
 	struct nf_nat_pptp nat_pptp_info;
 };
@@ -66,8 +62,7 @@
 struct nf_conn;
 
 /* The structure embedded in the conntrack structure. */
-struct nf_conn_nat
-{
+struct nf_conn_nat {
 	struct hlist_node bysource;
 	struct nf_nat_seq seq[IP_CT_DIR_MAX];
 	struct nf_conn *ct;
diff --git a/include/net/netfilter/nf_nat_protocol.h b/include/net/netfilter/nf_nat_protocol.h
index f3662c4..c398017 100644
--- a/include/net/netfilter/nf_nat_protocol.h
+++ b/include/net/netfilter/nf_nat_protocol.h
@@ -6,8 +6,7 @@
 
 struct nf_nat_range;
 
-struct nf_nat_protocol
-{
+struct nf_nat_protocol {
 	/* Protocol number. */
 	unsigned int protonum;
 
diff --git a/include/net/netns/generic.h b/include/net/netns/generic.h
index 0c04fd2..ff4982a 100644
--- a/include/net/netns/generic.h
+++ b/include/net/netns/generic.h
@@ -12,9 +12,11 @@
  * stuff on the struct net without explicit struct net modification
  *
  * The rules are simple:
- * 1. register the ops with register_pernet_gen_device to get the id
- *    of your private pointer;
- * 2. call net_assign_generic() to put the private data on the struct
+ * 1. set pernet_operations->id.  After register_pernet_device you
+ *    will have the id of your private pointer.
+ * 2. Either set pernet_operations->size (to have the code allocate and
+ *    free a private structure pointed to from struct net ) or 
+ *    call net_assign_generic() to put the private data on the struct
  *    net (most preferably this should be done in the ->init callback
  *    of the ops registered);
  * 3. do not change this pointer while the net is alive;
diff --git a/include/net/netns/xfrm.h b/include/net/netns/xfrm.h
index 1ba9127..56f8e55 100644
--- a/include/net/netns/xfrm.h
+++ b/include/net/netns/xfrm.h
@@ -43,6 +43,7 @@
 	struct work_struct	policy_hash_work;
 
 	struct sock		*nlsk;
+	struct sock		*nlsk_stash;
 
 	u32			sysctl_aevent_etime;
 	u32			sysctl_aevent_rseqth;
diff --git a/include/net/phonet/phonet.h b/include/net/phonet/phonet.h
index d43f71b..7b11407 100644
--- a/include/net/phonet/phonet.h
+++ b/include/net/phonet/phonet.h
@@ -46,7 +46,9 @@
 
 extern const struct proto_ops phonet_dgram_ops;
 
+void pn_sock_init(void);
 struct sock *pn_find_sock_by_sa(struct net *net, const struct sockaddr_pn *sa);
+void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb);
 void phonet_get_local_port_range(int *min, int *max);
 void pn_sock_hash(struct sock *sk);
 void pn_sock_unhash(struct sock *sk);
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 44c923c..d7b989c 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -25,7 +25,7 @@
 
 struct phonet_device_list {
 	struct list_head list;
-	spinlock_t lock;
+	struct mutex lock;
 };
 
 struct phonet_device_list *phonet_device_list(struct net *net);
@@ -47,6 +47,12 @@
 int phonet_address_lookup(struct net *net, u8 addr);
 void phonet_address_notify(int event, struct net_device *dev, u8 addr);
 
+int phonet_route_add(struct net_device *dev, u8 daddr);
+int phonet_route_del(struct net_device *dev, u8 daddr);
+void rtm_phonet_notify(int event, struct net_device *dev, u8 dst);
+struct net_device *phonet_route_get(struct net *net, u8 daddr);
+struct net_device *phonet_route_output(struct net *net, u8 daddr);
+
 #define PN_NO_ADDR	0xff
 
 extern const struct file_operations pn_sock_seq_fops;
diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
index d1ca314..dd3031a 100644
--- a/include/net/pkt_cls.h
+++ b/include/net/pkt_cls.h
@@ -7,8 +7,7 @@
 
 /* Basic packet classifier frontend definitions. */
 
-struct tcf_walker
-{
+struct tcf_walker {
 	int	stop;
 	int	skip;
 	int	count;
@@ -61,8 +60,7 @@
 		tp->q->ops->cl_ops->unbind_tcf(tp->q, cl);
 }
 
-struct tcf_exts
-{
+struct tcf_exts {
 #ifdef CONFIG_NET_CLS_ACT
 	struct tc_action *action;
 #endif
@@ -71,8 +69,7 @@
 /* Map to export classifier specific extension TLV types to the
  * generic extensions API. Unsupported extensions must be set to 0.
  */
-struct tcf_ext_map
-{
+struct tcf_ext_map {
 	int action;
 	int police;
 };
@@ -143,8 +140,7 @@
 /**
  * struct tcf_pkt_info - packet information
  */
-struct tcf_pkt_info
-{
+struct tcf_pkt_info {
 	unsigned char *		ptr;
 	int			nexthdr;
 };
@@ -162,8 +158,7 @@
  * @datalen: length of the ematch specific configuration data
  * @data: ematch specific data
  */
-struct tcf_ematch
-{
+struct tcf_ematch {
 	struct tcf_ematch_ops * ops;
 	unsigned long		data;
 	unsigned int		datalen;
@@ -211,8 +206,7 @@
  * @hdr: ematch tree header supplied by userspace
  * @matches: array of ematches
  */
-struct tcf_ematch_tree
-{
+struct tcf_ematch_tree {
 	struct tcf_ematch_tree_hdr hdr;
 	struct tcf_ematch *	matches;
 	
@@ -230,8 +224,7 @@
  * @owner: owner, must be set to THIS_MODULE
  * @link: link to previous/next ematch module (internal use)
  */
-struct tcf_ematch_ops
-{
+struct tcf_ematch_ops {
 	int			kind;
 	int			datalen;
 	int			(*change)(struct tcf_proto *, void *,
@@ -302,8 +295,7 @@
 
 #else /* CONFIG_NET_EMATCH */
 
-struct tcf_ematch_tree
-{
+struct tcf_ematch_tree {
 };
 
 #define tcf_em_tree_validate(tp, tb, t) ((void)(t), 0)
@@ -351,9 +343,9 @@
 	struct net_device *dev;
 
 	if (indev[0]) {
-		if  (!skb->iif)
+		if  (!skb->skb_iif)
 			return 0;
-		dev = __dev_get_by_index(dev_net(skb->dev), skb->iif);
+		dev = __dev_get_by_index(dev_net(skb->dev), skb->skb_iif);
 		if (!dev || strcmp(indev, dev->name))
 			return 0;
 	}
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index f911ec75..2d56726 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -5,8 +5,7 @@
 #include <linux/ktime.h>
 #include <net/sch_generic.h>
 
-struct qdisc_walker
-{
+struct qdisc_walker {
 	int	stop;
 	int	skip;
 	int	count;
diff --git a/include/net/protocol.h b/include/net/protocol.h
index 60249e5..f1effdd3c 100644
--- a/include/net/protocol.h
+++ b/include/net/protocol.h
@@ -47,8 +47,7 @@
 };
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-struct inet6_protocol 
-{
+struct inet6_protocol {
 	int	(*handler)(struct sk_buff *skb);
 
 	void	(*err_handler)(struct sk_buff *skb,
@@ -83,10 +82,6 @@
 	struct proto	 *prot;
 	const struct proto_ops *ops;
   
-	int              capability; /* Which (if any) capability do
-				      * we need to use this socket
-				      * interface?
-                                      */
 	char             no_check;   /* checksum on rcv/xmit/none? */
 	unsigned char	 flags;      /* See INET_PROTOSW_* below.  */
 };
diff --git a/include/net/red.h b/include/net/red.h
index 3cf31d4..995108e 100644
--- a/include/net/red.h
+++ b/include/net/red.h
@@ -90,8 +90,7 @@
 #define RED_STAB_SIZE	256
 #define RED_STAB_MASK	(RED_STAB_SIZE - 1)
 
-struct red_stats
-{
+struct red_stats {
 	u32		prob_drop;	/* Early probability drops */
 	u32		prob_mark;	/* Early probability marks */
 	u32		forced_drop;	/* Forced drops, qavg > max_thresh */
@@ -101,8 +100,7 @@
 	u32		backlog;
 };
 
-struct red_parms
-{
+struct red_parms {
 	/* Parameters */
 	u32		qth_min;	/* Min avg length threshold: A scaled */
 	u32		qth_max;	/* Max avg length threshold: A scaled */
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index c719084..c9b50eb 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -27,13 +27,19 @@
 struct dst_entry;
 struct proto;
 
+/* empty to "strongly type" an otherwise void parameter.
+ */
+struct request_values {
+};
+
 struct request_sock_ops {
 	int		family;
 	int		obj_size;
 	struct kmem_cache	*slab;
 	char		*slab_name;
 	int		(*rtx_syn_ack)(struct sock *sk,
-				       struct request_sock *req);
+				       struct request_sock *req,
+				       struct request_values *rvp);
 	void		(*send_ack)(struct sock *sk, struct sk_buff *skb,
 				    struct request_sock *req);
 	void		(*send_reset)(struct sock *sk,
diff --git a/include/net/route.h b/include/net/route.h
index 40f6346..bce6dd6 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -49,10 +49,8 @@
 
 struct fib_nh;
 struct inet_peer;
-struct rtable
-{
-	union
-	{
+struct rtable {
+	union {
 		struct dst_entry	dst;
 	} u;
 
@@ -77,16 +75,14 @@
 	struct inet_peer	*peer; /* long-living peer info */
 };
 
-struct ip_rt_acct
-{
+struct ip_rt_acct {
 	__u32 	o_bytes;
 	__u32 	o_packets;
 	__u32 	i_bytes;
 	__u32 	i_packets;
 };
 
-struct rt_cache_stat 
-{
+struct rt_cache_stat {
         unsigned int in_hit;
         unsigned int in_slow_tot;
         unsigned int in_slow_mc;
@@ -112,6 +108,7 @@
 extern void		ip_rt_redirect(__be32 old_gw, __be32 dst, __be32 new_gw,
 				       __be32 src, struct net_device *dev);
 extern void		rt_cache_flush(struct net *net, int how);
+extern void		rt_cache_flush_batch(void);
 extern int		__ip_route_output_key(struct net *, struct rtable **, const struct flowi *flp);
 extern int		ip_route_output_key(struct net *, struct rtable **, struct flowi *flp);
 extern int		ip_route_output_flow(struct net *, struct rtable **rp, struct flowi *flp, struct sock *sk, int flags);
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
index c3aa044d..48d3efc 100644
--- a/include/net/rtnetlink.h
+++ b/include/net/rtnetlink.h
@@ -55,13 +55,15 @@
 	int			(*validate)(struct nlattr *tb[],
 					    struct nlattr *data[]);
 
-	int			(*newlink)(struct net_device *dev,
+	int			(*newlink)(struct net *src_net,
+					   struct net_device *dev,
 					   struct nlattr *tb[],
 					   struct nlattr *data[]);
 	int			(*changelink)(struct net_device *dev,
 					      struct nlattr *tb[],
 					      struct nlattr *data[]);
-	void			(*dellink)(struct net_device *dev);
+	void			(*dellink)(struct net_device *dev,
+					   struct list_head *head);
 
 	size_t			(*get_size)(const struct net_device *dev);
 	int			(*fill_info)(struct sk_buff *skb,
@@ -82,8 +84,9 @@
 extern int	rtnl_link_register(struct rtnl_link_ops *ops);
 extern void	rtnl_link_unregister(struct rtnl_link_ops *ops);
 
-extern struct net_device *rtnl_create_link(struct net *net, char *ifname,
-		const struct rtnl_link_ops *ops, struct nlattr *tb[]);
+extern struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]);
+extern struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
+	char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[]);
 extern const struct nla_policy ifla_policy[IFLA_MAX+1];
 
 #define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind)
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index c33180d..dad558b 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -15,16 +15,14 @@
 struct tcf_walker;
 struct module;
 
-struct qdisc_rate_table
-{
+struct qdisc_rate_table {
 	struct tc_ratespec rate;
 	u32		data[256];
 	struct qdisc_rate_table *next;
 	int		refcnt;
 };
 
-enum qdisc_state_t
-{
+enum qdisc_state_t {
 	__QDISC_STATE_RUNNING,
 	__QDISC_STATE_SCHED,
 	__QDISC_STATE_DEACTIVATED,
@@ -37,8 +35,7 @@
 	u16			data[];
 };
 
-struct Qdisc
-{
+struct Qdisc {
 	int 			(*enqueue)(struct sk_buff *skb, struct Qdisc *dev);
 	struct sk_buff *	(*dequeue)(struct Qdisc *dev);
 	unsigned		flags;
@@ -78,8 +75,7 @@
 	struct gnet_stats_queue	qstats;
 };
 
-struct Qdisc_class_ops
-{
+struct Qdisc_class_ops {
 	/* Child qdisc manipulation */
 	struct netdev_queue *	(*select_queue)(struct Qdisc *, struct tcmsg *);
 	int			(*graft)(struct Qdisc *, unsigned long cl,
@@ -108,8 +104,7 @@
 					struct gnet_dump *);
 };
 
-struct Qdisc_ops
-{
+struct Qdisc_ops {
 	struct Qdisc_ops	*next;
 	const struct Qdisc_class_ops	*cl_ops;
 	char			id[IFNAMSIZ];
@@ -133,14 +128,12 @@
 };
 
 
-struct tcf_result
-{
+struct tcf_result {
 	unsigned long	class;
 	u32		classid;
 };
 
-struct tcf_proto_ops
-{
+struct tcf_proto_ops {
 	struct tcf_proto_ops	*next;
 	char			kind[IFNAMSIZ];
 
@@ -164,8 +157,7 @@
 	struct module		*owner;
 };
 
-struct tcf_proto
-{
+struct tcf_proto {
 	/* Fast access part */
 	struct tcf_proto	*next;
 	void			*root;
@@ -261,14 +253,12 @@
 extern struct Qdisc_ops pfifo_fast_ops;
 extern struct Qdisc_ops mq_qdisc_ops;
 
-struct Qdisc_class_common
-{
+struct Qdisc_class_common {
 	u32			classid;
 	struct hlist_node	hnode;
 };
 
-struct Qdisc_class_hash
-{
+struct Qdisc_class_hash {
 	struct hlist_head	*hash;
 	unsigned int		hashsize;
 	unsigned int		hashmask;
diff --git a/include/net/scm.h b/include/net/scm.h
index cf48c80..8360e47 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -12,15 +12,13 @@
  */
 #define SCM_MAX_FD	255
 
-struct scm_fp_list
-{
+struct scm_fp_list {
 	struct list_head	list;
 	int			count;
 	struct file		*fp[SCM_MAX_FD];
 };
 
-struct scm_cookie
-{
+struct scm_cookie {
 	struct ucred		creds;		/* Skb credentials	*/
 	struct scm_fp_list	*fp;		/* Passed files		*/
 #ifdef CONFIG_SECURITY_NETWORK
@@ -88,8 +86,7 @@
 static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg,
 				struct scm_cookie *scm, int flags)
 {
-	if (!msg->msg_control)
-	{
+	if (!msg->msg_control) {
 		if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp)
 			msg->msg_flags |= MSG_CTRUNC;
 		scm_destroy(scm);
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index 58f714a..6390884 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -308,6 +308,10 @@
 
 #define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
 #define SCTP_DEFAULT_MAXWINDOW	65535	/* default rwnd size */
+#define SCTP_DEFAULT_RWND_SHIFT  4	/* by default, update on 1/16 of
+					 * rcvbuf, which is 1/8 of initial
+					 * window
+					 */
 #define SCTP_DEFAULT_MAXSEGMENT 1500	/* MTU size, this is the limit
                                          * to which we will raise the P-MTU.
 					 */
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 8a6d529..78740ec 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -227,8 +227,7 @@
 #endif /* !TEST_FRAME */
 
 /* sctp mib definitions */
-enum
-{
+enum {
 	SCTP_MIB_NUM = 0,
 	SCTP_MIB_CURRESTAB,			/* CurrEstab */
 	SCTP_MIB_ACTIVEESTABS,			/* ActiveEstabs */
diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h
index c1dd893..851c813 100644
--- a/include/net/sctp/sm.h
+++ b/include/net/sctp/sm.h
@@ -243,7 +243,8 @@
 				 const struct sctp_chunk *chunk,
 				 __be16 cause_code,
 				 const void *payload,
-				 size_t paylen);
+				 size_t paylen,
+				 size_t reserve_tail);
 
 struct sctp_chunk *sctp_make_asconf_update_ip(struct sctp_association *,
 					      union sctp_addr *,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index cd2e187..7571e32 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -231,6 +231,11 @@
 	/* Flag to indicate whether computing and verifying checksum
 	 * is disabled. */
         int checksum_disable;
+
+	/* Threshold for rwnd update SACKS.  Receive buffer shifted this many
+	 * bits is an indicator of when to send and window update SACK.
+	 */
+	int rwnd_update_shift;
 } sctp_globals;
 
 #define sctp_rto_initial		(sctp_globals.rto_initial)
@@ -267,6 +272,7 @@
 #define sctp_prsctp_enable		(sctp_globals.prsctp_enable)
 #define sctp_auth_enable		(sctp_globals.auth_enable)
 #define sctp_checksum_disable		(sctp_globals.checksum_disable)
+#define sctp_rwnd_upd_shift		(sctp_globals.rwnd_update_shift)
 
 /* SCTP Socket type: UDP or TCP style. */
 typedef enum {
@@ -893,7 +899,6 @@
 	 */
 	/* RTO	       : The current retransmission timeout value.  */
 	unsigned long rto;
-	unsigned long last_rto;
 
 	__u32 rtt;		/* This is the most recent RTT.	 */
 
@@ -936,6 +941,8 @@
 	/* Data that has been sent, but not acknowledged. */
 	__u32 flight_size;
 
+	__u32 burst_limited;	/* Holds old cwnd when max.burst is applied */
+
 	/* TSN marking the fast recovery exit point */
 	__u32 fast_recovery_exit;
 
@@ -944,12 +951,6 @@
 	/* Source address. */
 	union sctp_addr saddr;
 
-	/* When was the last time(in jiffies) that a data packet was sent on
-	 * this transport?  This is used to adjust the cwnd when the transport
-	 * becomes inactive.
-	 */
-	unsigned long last_time_used;
-
 	/* Heartbeat interval: The endpoint sends out a Heartbeat chunk to
 	 * the destination address every heartbeat interval.
 	 */
@@ -1070,6 +1071,8 @@
 void sctp_transport_update_rto(struct sctp_transport *, __u32);
 void sctp_transport_raise_cwnd(struct sctp_transport *, __u32, __u32);
 void sctp_transport_lower_cwnd(struct sctp_transport *, sctp_lower_cwnd_t);
+void sctp_transport_burst_limited(struct sctp_transport *);
+void sctp_transport_burst_reset(struct sctp_transport *);
 unsigned long sctp_transport_timeout(struct sctp_transport *);
 void sctp_transport_reset(struct sctp_transport *);
 void sctp_transport_update_pmtu(struct sctp_transport *, u32);
diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h
index be2334a..2b2769c 100644
--- a/include/net/sctp/user.h
+++ b/include/net/sctp/user.h
@@ -60,96 +60,49 @@
 /* The following symbols come from the Sockets API Extensions for
  * SCTP <draft-ietf-tsvwg-sctpsocket-07.txt>.
  */
-enum sctp_optname {
-	SCTP_RTOINFO,
-#define SCTP_RTOINFO SCTP_RTOINFO
-	SCTP_ASSOCINFO,
-#define SCTP_ASSOCINFO SCTP_ASSOCINFO
-	SCTP_INITMSG,
-#define SCTP_INITMSG SCTP_INITMSG
-	SCTP_NODELAY, 	/* Get/set nodelay option. */
-#define SCTP_NODELAY	SCTP_NODELAY
-	SCTP_AUTOCLOSE,
-#define SCTP_AUTOCLOSE SCTP_AUTOCLOSE
-	SCTP_SET_PEER_PRIMARY_ADDR, 
-#define SCTP_SET_PEER_PRIMARY_ADDR SCTP_SET_PEER_PRIMARY_ADDR
-	SCTP_PRIMARY_ADDR,
-#define SCTP_PRIMARY_ADDR SCTP_PRIMARY_ADDR
-	SCTP_ADAPTATION_LAYER,
-#define SCTP_ADAPTATION_LAYER SCTP_ADAPTATION_LAYER
-	SCTP_DISABLE_FRAGMENTS,
-#define SCTP_DISABLE_FRAGMENTS SCTP_DISABLE_FRAGMENTS
-	SCTP_PEER_ADDR_PARAMS,
-#define SCTP_PEER_ADDR_PARAMS SCTP_PEER_ADDR_PARAMS
-	SCTP_DEFAULT_SEND_PARAM,
-#define SCTP_DEFAULT_SEND_PARAM SCTP_DEFAULT_SEND_PARAM
-	SCTP_EVENTS,
-#define SCTP_EVENTS SCTP_EVENTS
-	SCTP_I_WANT_MAPPED_V4_ADDR,  /* Turn on/off mapped v4 addresses  */
-#define SCTP_I_WANT_MAPPED_V4_ADDR SCTP_I_WANT_MAPPED_V4_ADDR
-	SCTP_MAXSEG, 	/* Get/set maximum fragment. */
-#define SCTP_MAXSEG 	SCTP_MAXSEG
-	SCTP_STATUS,
-#define SCTP_STATUS SCTP_STATUS
-	SCTP_GET_PEER_ADDR_INFO,
-#define SCTP_GET_PEER_ADDR_INFO SCTP_GET_PEER_ADDR_INFO
-	SCTP_DELAYED_ACK,
-#define SCTP_DELAYED_ACK_TIME SCTP_DELAYED_ACK
-#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK
-	SCTP_CONTEXT,	/* Receive Context */
-#define SCTP_CONTEXT SCTP_CONTEXT
-	SCTP_FRAGMENT_INTERLEAVE,
-#define SCTP_FRAGMENT_INTERLEAVE SCTP_FRAGMENT_INTERLEAVE
-	SCTP_PARTIAL_DELIVERY_POINT,	/* Set/Get partial delivery point */
-#define SCTP_PARTIAL_DELIVERY_POINT SCTP_PARTIAL_DELIVERY_POINT
-	SCTP_MAX_BURST,		/* Set/Get max burst */
-#define SCTP_MAX_BURST SCTP_MAX_BURST
-	SCTP_AUTH_CHUNK,	/* Set only: add a chunk type to authenticat */
-#define SCTP_AUTH_CHUNK SCTP_AUTH_CHUNK
-	SCTP_HMAC_IDENT,
-#define SCTP_HMAC_IDENT SCTP_HMAC_IDENT
-	SCTP_AUTH_KEY,
-#define SCTP_AUTH_KEY SCTP_AUTH_KEY
-	SCTP_AUTH_ACTIVE_KEY,
-#define SCTP_AUTH_ACTIVE_KEY SCTP_AUTH_ACTIVE_KEY
-	SCTP_AUTH_DELETE_KEY,
-#define SCTP_AUTH_DELETE_KEY SCTP_AUTH_DELETE_KEY
-	SCTP_PEER_AUTH_CHUNKS,		/* Read only */
-#define SCTP_PEER_AUTH_CHUNKS SCTP_PEER_AUTH_CHUNKS
-	SCTP_LOCAL_AUTH_CHUNKS,		/* Read only */
-#define SCTP_LOCAL_AUTH_CHUNKS SCTP_LOCAL_AUTH_CHUNKS
-	SCTP_GET_ASSOC_NUMBER,		/* Read only */
-#define SCTP_GET_ASSOC_NUMBER SCTP_GET_ASSOC_NUMBER
+#define SCTP_RTOINFO	0
+#define SCTP_ASSOCINFO  1
+#define SCTP_INITMSG	2
+#define SCTP_NODELAY	3		/* Get/set nodelay option. */
+#define SCTP_AUTOCLOSE	4
+#define SCTP_SET_PEER_PRIMARY_ADDR 5
+#define SCTP_PRIMARY_ADDR	6
+#define SCTP_ADAPTATION_LAYER	7
+#define SCTP_DISABLE_FRAGMENTS	8
+#define SCTP_PEER_ADDR_PARAMS	9
+#define SCTP_DEFAULT_SEND_PARAM	10
+#define SCTP_EVENTS	11
+#define SCTP_I_WANT_MAPPED_V4_ADDR 12	/* Turn on/off mapped v4 addresses  */
+#define SCTP_MAXSEG	13		/* Get/set maximum fragment. */
+#define SCTP_STATUS	14
+#define SCTP_GET_PEER_ADDR_INFO	15
+#define SCTP_DELAYED_ACK_TIME	16
+#define SCTP_DELAYED_ACK SCTP_DELAYED_ACK_TIME
+#define SCTP_CONTEXT	17
+#define SCTP_FRAGMENT_INTERLEAVE	18
+#define SCTP_PARTIAL_DELIVERY_POINT	19 /* Set/Get partial delivery point */
+#define SCTP_MAX_BURST	20		/* Set/Get max burst */
+#define SCTP_AUTH_CHUNK	21	/* Set only: add a chunk type to authenticate */
+#define SCTP_HMAC_IDENT	22
+#define SCTP_AUTH_KEY	23
+#define SCTP_AUTH_ACTIVE_KEY	24
+#define SCTP_AUTH_DELETE_KEY	25
+#define SCTP_PEER_AUTH_CHUNKS	26	/* Read only */
+#define SCTP_LOCAL_AUTH_CHUNKS	27	/* Read only */
+#define SCTP_GET_ASSOC_NUMBER	28	/* Read only */
 
-
-	/* Internal Socket Options. Some of the sctp library functions are 
-	 * implemented using these socket options.
-	 */
-	SCTP_SOCKOPT_BINDX_ADD = 100,/* BINDX requests for adding addresses. */
-#define SCTP_SOCKOPT_BINDX_ADD	SCTP_SOCKOPT_BINDX_ADD
-	SCTP_SOCKOPT_BINDX_REM, /* BINDX requests for removing addresses. */
-#define SCTP_SOCKOPT_BINDX_REM	SCTP_SOCKOPT_BINDX_REM
-	SCTP_SOCKOPT_PEELOFF, 	/* peel off association. */
-#define SCTP_SOCKOPT_PEELOFF	SCTP_SOCKOPT_PEELOFF
-	SCTP_GET_PEER_ADDRS_NUM_OLD, 	/* Get number of peer addresss. */
-#define SCTP_GET_PEER_ADDRS_NUM_OLD	SCTP_GET_PEER_ADDRS_NUM_OLD
-	SCTP_GET_PEER_ADDRS_OLD, 	/* Get all peer addresss. */
-#define SCTP_GET_PEER_ADDRS_OLD	SCTP_GET_PEER_ADDRS_OLD
-	SCTP_GET_LOCAL_ADDRS_NUM_OLD, 	/* Get number of local addresss. */
-#define SCTP_GET_LOCAL_ADDRS_NUM_OLD	SCTP_GET_LOCAL_ADDRS_NUM_OLD
-	SCTP_GET_LOCAL_ADDRS_OLD, 	/* Get all local addresss. */
-#define SCTP_GET_LOCAL_ADDRS_OLD	SCTP_GET_LOCAL_ADDRS_OLD
-	SCTP_SOCKOPT_CONNECTX_OLD, /* CONNECTX old requests. */
-#define SCTP_SOCKOPT_CONNECTX_OLD	SCTP_SOCKOPT_CONNECTX_OLD
-	SCTP_GET_PEER_ADDRS, 	/* Get all peer addresss. */
-#define SCTP_GET_PEER_ADDRS	SCTP_GET_PEER_ADDRS
-	SCTP_GET_LOCAL_ADDRS, 	/* Get all local addresss. */
-#define SCTP_GET_LOCAL_ADDRS	SCTP_GET_LOCAL_ADDRS
-	SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */
-#define SCTP_SOCKOPT_CONNECTX	SCTP_SOCKOPT_CONNECTX
-	SCTP_SOCKOPT_CONNECTX3, /* CONNECTX requests. (new implementation) */
-#define SCTP_SOCKOPT_CONNECTX3	SCTP_SOCKOPT_CONNECTX3
-};
+/* Internal Socket Options. Some of the sctp library functions are
+ * implemented using these socket options.
+ */
+#define SCTP_SOCKOPT_BINDX_ADD	100	/* BINDX requests for adding addrs */
+#define SCTP_SOCKOPT_BINDX_REM	101	/* BINDX requests for removing addrs. */
+#define SCTP_SOCKOPT_PEELOFF	102	/* peel off association. */
+/* Options 104-106 are deprecated and removed. Do not use this space */
+#define SCTP_SOCKOPT_CONNECTX_OLD	107	/* CONNECTX old requests. */
+#define SCTP_GET_PEER_ADDRS	108		/* Get all peer addresss. */
+#define SCTP_GET_LOCAL_ADDRS	109		/* Get all local addresss. */
+#define SCTP_SOCKOPT_CONNECTX	110		/* CONNECTX requests. */
+#define SCTP_SOCKOPT_CONNECTX3	111	/* CONNECTX requests (updated) */
 
 /*
  * 5.2.1 SCTP Initiation Structure (SCTP_INIT)
@@ -206,6 +159,7 @@
 	SCTP_UNORDERED = 1,  /* Send/receive message unordered. */
 	SCTP_ADDR_OVER = 2,  /* Override the primary destination. */
 	SCTP_ABORT=4,        /* Send an ABORT message to the peer. */
+	SCTP_SACK_IMMEDIATELY = 8,	/* SACK should be sent without delay */
 	SCTP_EOF=MSG_FIN,    /* Initiate graceful shutdown process. */	
 };
 
diff --git a/include/net/sock.h b/include/net/sock.h
index 9f96394..3f1a4804 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -105,14 +105,17 @@
 /**
  *	struct sock_common - minimal network layer representation of sockets
  *	@skc_node: main hash linkage for various protocol lookup tables
- *	@skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
+ *	@skc_nulls_node: main hash linkage for TCP/UDP/UDP-Lite protocol
  *	@skc_refcnt: reference count
+ *	@skc_tx_queue_mapping: tx queue number for this connection
  *	@skc_hash: hash value used with various protocol lookup tables
+ *	@skc_u16hashes: two u16 hash values used by UDP lookup tables
  *	@skc_family: network address family
  *	@skc_state: Connection state
  *	@skc_reuse: %SO_REUSEADDR setting
  *	@skc_bound_dev_if: bound device index if != 0
  *	@skc_bind_node: bind hash linkage for various protocol lookup tables
+ *	@skc_portaddr_node: second hash linkage for UDP/UDP-Lite protocol
  *	@skc_prot: protocol handlers inside a network family
  *	@skc_net: reference to the network namespace of this socket
  *
@@ -128,13 +131,20 @@
 		struct hlist_nulls_node skc_nulls_node;
 	};
 	atomic_t		skc_refcnt;
+	int			skc_tx_queue_mapping;
 
-	unsigned int		skc_hash;
+	union  {
+		unsigned int	skc_hash;
+		__u16		skc_u16hashes[2];
+	};
 	unsigned short		skc_family;
 	volatile unsigned char	skc_state;
 	unsigned char		skc_reuse;
 	int			skc_bound_dev_if;
-	struct hlist_node	skc_bind_node;
+	union {
+		struct hlist_node	skc_bind_node;
+		struct hlist_nulls_node skc_portaddr_node;
+	};
 	struct proto		*skc_prot;
 #ifdef CONFIG_NET_NS
 	struct net	 	*skc_net;
@@ -215,6 +225,7 @@
 #define sk_node			__sk_common.skc_node
 #define sk_nulls_node		__sk_common.skc_nulls_node
 #define sk_refcnt		__sk_common.skc_refcnt
+#define sk_tx_queue_mapping	__sk_common.skc_tx_queue_mapping
 
 #define sk_copy_start		__sk_common.skc_hash
 #define sk_hash			__sk_common.skc_hash
@@ -504,6 +515,8 @@
 	SOCK_TIMESTAMPING_SOFTWARE,     /* %SOF_TIMESTAMPING_SOFTWARE */
 	SOCK_TIMESTAMPING_RAW_HARDWARE, /* %SOF_TIMESTAMPING_RAW_HARDWARE */
 	SOCK_TIMESTAMPING_SYS_HARDWARE, /* %SOF_TIMESTAMPING_SYS_HARDWARE */
+	SOCK_FASYNC, /* fasync() active */
+	SOCK_RXQ_OVFL,
 };
 
 static inline void sock_copy_flags(struct sock *nsk, struct sock *osk)
@@ -1092,8 +1105,29 @@
 extern int sk_receive_skb(struct sock *sk, struct sk_buff *skb,
 			  const int nested);
 
+static inline void sk_tx_queue_set(struct sock *sk, int tx_queue)
+{
+	sk->sk_tx_queue_mapping = tx_queue;
+}
+
+static inline void sk_tx_queue_clear(struct sock *sk)
+{
+	sk->sk_tx_queue_mapping = -1;
+}
+
+static inline int sk_tx_queue_get(const struct sock *sk)
+{
+	return sk->sk_tx_queue_mapping;
+}
+
+static inline bool sk_tx_queue_recorded(const struct sock *sk)
+{
+	return (sk && sk->sk_tx_queue_mapping >= 0);
+}
+
 static inline void sk_set_socket(struct sock *sk, struct socket *sock)
 {
+	sk_tx_queue_clear(sk);
 	sk->sk_socket = sock;
 }
 
@@ -1150,6 +1184,7 @@
 {
 	struct dst_entry *old_dst;
 
+	sk_tx_queue_clear(sk);
 	old_dst = sk->sk_dst_cache;
 	sk->sk_dst_cache = dst;
 	dst_release(old_dst);
@@ -1168,6 +1203,7 @@
 {
 	struct dst_entry *old_dst;
 
+	sk_tx_queue_clear(sk);
 	old_dst = sk->sk_dst_cache;
 	sk->sk_dst_cache = NULL;
 	dst_release(old_dst);
@@ -1396,7 +1432,7 @@
 
 static inline void sk_wake_async(struct sock *sk, int how, int band)
 {
-	if (sk->sk_socket && sk->sk_socket->fasync_list)
+	if (sock_flag(sk, SOCK_FASYNC))
 		sock_wake_async(sk->sk_socket, how, band);
 }
 
@@ -1492,6 +1528,8 @@
 		sk->sk_stamp = kt;
 }
 
+extern void sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk, struct sk_buff *skb);
+
 /**
  * sock_tx_timestamp - checks whether the outgoing packet is to be time stamped
  * @msg:	outgoing packet
diff --git a/include/net/tc_act/tc_skbedit.h b/include/net/tc_act/tc_skbedit.h
index 6abb3ed..e103fe0 100644
--- a/include/net/tc_act/tc_skbedit.h
+++ b/include/net/tc_act/tc_skbedit.h
@@ -26,7 +26,9 @@
 	struct tcf_common	common;
 	u32			flags;
 	u32     		priority;
+	u32     		mark;
 	u16			queue_mapping;
+	/* XXX: 16-bit pad here? */
 };
 #define to_skbedit(pc) \
 	container_of(pc, struct tcf_skbedit, common)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 03a49c7..e2d2ca2 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -30,6 +30,7 @@
 #include <linux/dmaengine.h>
 #include <linux/crypto.h>
 #include <linux/cryptohash.h>
+#include <linux/kref.h>
 
 #include <net/inet_connection_sock.h>
 #include <net/inet_timewait_sock.h>
@@ -62,9 +63,6 @@
 /* Minimal accepted MSS. It is (60+60+8) - (20+20). */
 #define TCP_MIN_MSS		88U
 
-/* Minimal RCV_MSS. */
-#define TCP_MIN_RCVMSS		536U
-
 /* The least MTU to use for probing */
 #define TCP_BASE_MSS		512
 
@@ -167,6 +165,7 @@
 #define TCPOPT_SACK             5       /* SACK Block */
 #define TCPOPT_TIMESTAMP	8	/* Better RTT estimations/PAWS */
 #define TCPOPT_MD5SIG		19	/* MD5 Signature (RFC2385) */
+#define TCPOPT_COOKIE		253	/* Cookie extension (experimental) */
 
 /*
  *     TCP option lengths
@@ -177,6 +176,10 @@
 #define TCPOLEN_SACK_PERM      2
 #define TCPOLEN_TIMESTAMP      10
 #define TCPOLEN_MD5SIG         18
+#define TCPOLEN_COOKIE_BASE    2	/* Cookie-less header extension */
+#define TCPOLEN_COOKIE_PAIR    3	/* Cookie pair header extension */
+#define TCPOLEN_COOKIE_MIN     (TCPOLEN_COOKIE_BASE+TCP_COOKIE_MIN)
+#define TCPOLEN_COOKIE_MAX     (TCPOLEN_COOKIE_BASE+TCP_COOKIE_MAX)
 
 /* But this is what stacks really send out. */
 #define TCPOLEN_TSTAMP_ALIGNED		12
@@ -237,6 +240,7 @@
 extern int sysctl_tcp_workaround_signed_windows;
 extern int sysctl_tcp_slow_start_after_idle;
 extern int sysctl_tcp_max_ssthresh;
+extern int sysctl_tcp_cookie_size;
 
 extern atomic_t tcp_memory_allocated;
 extern struct percpu_counter tcp_sockets_allocated;
@@ -343,11 +347,6 @@
 
 extern void tcp_enter_quickack_mode(struct sock *sk);
 
-static inline void tcp_clear_options(struct tcp_options_received *rx_opt)
-{
- 	rx_opt->tstamp_ok = rx_opt->sack_ok = rx_opt->wscale_ok = rx_opt->snd_wscale = 0;
-}
-
 #define	TCP_ECN_OK		1
 #define	TCP_ECN_QUEUE_CWR	2
 #define	TCP_ECN_DEMAND_CWR	4
@@ -359,8 +358,7 @@
 		inet_rsk(req)->ecn_ok = 1;
 }
 
-enum tcp_tw_status
-{
+enum tcp_tw_status {
 	TCP_TW_SUCCESS = 0,
 	TCP_TW_RST = 1,
 	TCP_TW_ACK = 2,
@@ -409,7 +407,9 @@
 
 extern void			tcp_parse_options(struct sk_buff *skb,
 						  struct tcp_options_received *opt_rx,
-						  int estab);
+						  u8 **hvpp,
+						  int estab,
+						  struct dst_entry *dst);
 
 extern u8			*tcp_parse_md5sig_option(struct tcphdr *th);
 
@@ -443,7 +443,8 @@
 
 extern struct sk_buff *		tcp_make_synack(struct sock *sk,
 						struct dst_entry *dst,
-						struct request_sock *req);
+						struct request_sock *req,
+						struct request_values *rvp);
 
 extern int			tcp_disconnect(struct sock *sk, int flags);
 
@@ -1228,6 +1229,7 @@
 	while ((skb = __skb_dequeue(&sk->sk_write_queue)) != NULL)
 		sk_wmem_free_skb(sk, skb);
 	sk_mem_reclaim(sk);
+	tcp_clear_all_retrans_hints(tcp_sk(sk));
 }
 
 static inline struct sk_buff *tcp_write_queue_head(struct sock *sk)
@@ -1480,6 +1482,91 @@
 #endif
 };
 
+/* Using SHA1 for now, define some constants.
+ */
+#define COOKIE_DIGEST_WORDS (SHA_DIGEST_WORDS)
+#define COOKIE_MESSAGE_WORDS (SHA_MESSAGE_BYTES / 4)
+#define COOKIE_WORKSPACE_WORDS (COOKIE_DIGEST_WORDS + COOKIE_MESSAGE_WORDS)
+
+extern int tcp_cookie_generator(u32 *bakery);
+
+/**
+ *	struct tcp_cookie_values - each socket needs extra space for the
+ *	cookies, together with (optional) space for any SYN data.
+ *
+ *	A tcp_sock contains a pointer to the current value, and this is
+ *	cloned to the tcp_timewait_sock.
+ *
+ * @cookie_pair:	variable data from the option exchange.
+ *
+ * @cookie_desired:	user specified tcpct_cookie_desired.  Zero
+ *			indicates default (sysctl_tcp_cookie_size).
+ *			After cookie sent, remembers size of cookie.
+ *			Range 0, TCP_COOKIE_MIN to TCP_COOKIE_MAX.
+ *
+ * @s_data_desired:	user specified tcpct_s_data_desired.  When the
+ *			constant payload is specified (@s_data_constant),
+ *			holds its length instead.
+ *			Range 0 to TCP_MSS_DESIRED.
+ *
+ * @s_data_payload:	constant data that is to be included in the
+ *			payload of SYN or SYNACK segments when the
+ *			cookie option is present.
+ */
+struct tcp_cookie_values {
+	struct kref	kref;
+	u8		cookie_pair[TCP_COOKIE_PAIR_SIZE];
+	u8		cookie_pair_size;
+	u8		cookie_desired;
+	u16		s_data_desired:11,
+			s_data_constant:1,
+			s_data_in:1,
+			s_data_out:1,
+			s_data_unused:2;
+	u8		s_data_payload[0];
+};
+
+static inline void tcp_cookie_values_release(struct kref *kref)
+{
+	kfree(container_of(kref, struct tcp_cookie_values, kref));
+}
+
+/* The length of constant payload data.  Note that s_data_desired is
+ * overloaded, depending on s_data_constant: either the length of constant
+ * data (returned here) or the limit on variable data.
+ */
+static inline int tcp_s_data_size(const struct tcp_sock *tp)
+{
+	return (tp->cookie_values != NULL && tp->cookie_values->s_data_constant)
+		? tp->cookie_values->s_data_desired
+		: 0;
+}
+
+/**
+ *	struct tcp_extend_values - tcp_ipv?.c to tcp_output.c workspace.
+ *
+ *	As tcp_request_sock has already been extended in other places, the
+ *	only remaining method is to pass stack values along as function
+ *	parameters.  These parameters are not needed after sending SYNACK.
+ *
+ * @cookie_bakery:	cryptographic secret and message workspace.
+ *
+ * @cookie_plus:	bytes in authenticator/cookie option, copied from
+ *			struct tcp_options_received (above).
+ */
+struct tcp_extend_values {
+	struct request_values		rv;
+	u32				cookie_bakery[COOKIE_WORKSPACE_WORDS];
+	u8				cookie_plus:6,
+					cookie_out_never:1,
+					cookie_in_always:1;
+};
+
+static inline struct tcp_extend_values *tcp_xv(struct request_values *rvp)
+{
+	return (struct tcp_extend_values *)rvp;
+}
+
 extern void tcp_v4_init(void);
 extern void tcp_init(void);
 
diff --git a/include/net/udp.h b/include/net/udp.h
index f98abd2..5348d80 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -50,16 +50,49 @@
 };
 #define UDP_SKB_CB(__skb)	((struct udp_skb_cb *)((__skb)->cb))
 
+/**
+ *	struct udp_hslot - UDP hash slot
+ *
+ *	@head:	head of list of sockets
+ *	@count:	number of sockets in 'head' list
+ *	@lock:	spinlock protecting changes to head/count
+ */
 struct udp_hslot {
 	struct hlist_nulls_head	head;
+	int			count;
 	spinlock_t		lock;
 } __attribute__((aligned(2 * sizeof(long))));
+
+/**
+ *	struct udp_table - UDP table
+ *
+ *	@hash:	hash table, sockets are hashed on (local port)
+ *	@hash2:	hash table, sockets are hashed on (local port, local address)
+ *	@mask:	number of slots in hash tables, minus 1
+ *	@log:	log2(number of slots in hash table)
+ */
 struct udp_table {
-	struct udp_hslot	hash[UDP_HTABLE_SIZE];
+	struct udp_hslot	*hash;
+	struct udp_hslot	*hash2;
+	unsigned int		mask;
+	unsigned int		log;
 };
 extern struct udp_table udp_table;
-extern void udp_table_init(struct udp_table *);
-
+extern void udp_table_init(struct udp_table *, const char *);
+static inline struct udp_hslot *udp_hashslot(struct udp_table *table,
+					     struct net *net, unsigned num)
+{
+	return &table->hash[udp_hashfn(net, num, table->mask)];
+}
+/*
+ * For secondary hash, net_hash_mix() is performed before calling
+ * udp_hashslot2(), this explains difference with udp_hashslot()
+ */
+static inline struct udp_hslot *udp_hashslot2(struct udp_table *table,
+					      unsigned int hash)
+{
+	return &table->hash2[hash & table->mask];
+}
 
 /* Note: this must match 'valbool' in sock_setsockopt */
 #define UDP_CSUM_NOXMIT		1
@@ -125,7 +158,8 @@
 }
 
 extern int	udp_lib_get_port(struct sock *sk, unsigned short snum,
-		int (*)(const struct sock*,const struct sock*));
+		int (*)(const struct sock *,const struct sock *),
+		unsigned int hash2_nulladdr);
 
 /* net/ipv4/udp.c */
 extern int	udp_get_port(struct sock *sk, unsigned short snum,
diff --git a/include/net/wext.h b/include/net/wext.h
index 3f2b94d..4f6e742 100644
--- a/include/net/wext.h
+++ b/include/net/wext.h
@@ -1,29 +1,19 @@
 #ifndef __NET_WEXT_H
 #define __NET_WEXT_H
 
-/*
- * wireless extensions interface to the core code
- */
+#include <net/iw_handler.h>
 
 struct net;
 
-#ifdef CONFIG_WIRELESS_EXT
-extern int wext_proc_init(struct net *net);
-extern void wext_proc_exit(struct net *net);
+#ifdef CONFIG_WEXT_CORE
 extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
 			     void __user *arg);
 extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
 				    unsigned long arg);
+
 extern struct iw_statistics *get_wireless_stats(struct net_device *dev);
+extern int call_commit_handler(struct net_device *dev);
 #else
-static inline int wext_proc_init(struct net *net)
-{
-	return 0;
-}
-static inline void wext_proc_exit(struct net *net)
-{
-	return;
-}
 static inline int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
 				    void __user *arg)
 {
@@ -36,4 +26,35 @@
 }
 #endif
 
+#ifdef CONFIG_WEXT_PROC
+extern int wext_proc_init(struct net *net);
+extern void wext_proc_exit(struct net *net);
+#else
+static inline int wext_proc_init(struct net *net)
+{
+	return 0;
+}
+static inline void wext_proc_exit(struct net *net)
+{
+	return;
+}
+#endif
+
+#ifdef CONFIG_WEXT_PRIV
+int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
+		       unsigned int cmd, struct iw_request_info *info,
+		       iw_handler handler);
+int compat_private_call(struct net_device *dev, struct iwreq *iwr,
+			unsigned int cmd, struct iw_request_info *info,
+			iw_handler handler);
+int iw_handler_get_private(struct net_device *		dev,
+			   struct iw_request_info *	info,
+			   union iwreq_data *		wrqu,
+			   char *			extra);
+#else
+#define ioctl_private_call NULL
+#define compat_private_call NULL
+#endif
+
+
 #endif /* __NET_WEXT_H */
diff --git a/include/net/wimax.h b/include/net/wimax.h
index 2af7bf8..d69c4a7 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -195,6 +195,12 @@
  *    defining the `struct nla_policy` for each message, it has to have
  *    an array size of WIMAX_GNL_ATTR_MAX+1.
  *
+ * The op_*() function pointers will not be called if the wimax_dev is
+ * in a state <= %WIMAX_ST_UNINITIALIZED. The exception is:
+ *
+ * - op_reset: can be called at any time after wimax_dev_add() has
+ *   been called.
+ *
  * THE PIPE INTERFACE:
  *
  * This interface is kept intentionally simple. The driver can send
diff --git a/include/net/wpan-phy.h b/include/net/wpan-phy.h
index 547b1e2..8592623 100644
--- a/include/net/wpan-phy.h
+++ b/include/net/wpan-phy.h
@@ -34,20 +34,32 @@
 	 */
 	u8 current_channel;
 	u8 current_page;
-	u32 channels_supported;
+	u32 channels_supported[32];
 	u8 transmit_power;
 	u8 cca_mode;
 
 	struct device dev;
 	int idx;
 
+	struct net_device *(*add_iface)(struct wpan_phy *phy,
+			const char *name);
+	void (*del_iface)(struct wpan_phy *phy, struct net_device *dev);
+
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
 
+#define to_phy(_dev)	container_of(_dev, struct wpan_phy, dev)
+
 struct wpan_phy *wpan_phy_alloc(size_t priv_size);
-int wpan_phy_register(struct device *parent, struct wpan_phy *phy);
+static inline void wpan_phy_set_dev(struct wpan_phy *phy, struct device *dev)
+{
+	phy->dev.parent = dev;
+}
+int wpan_phy_register(struct wpan_phy *phy);
 void wpan_phy_unregister(struct wpan_phy *phy);
 void wpan_phy_free(struct wpan_phy *phy);
+/* Same semantics as for class_for_each_device */
+int wpan_phy_for_each(int (*fn)(struct wpan_phy *phy, void *data), void *data);
 
 static inline void *wpan_phy_priv(struct wpan_phy *phy)
 {
@@ -56,6 +68,12 @@
 }
 
 struct wpan_phy *wpan_phy_find(const char *str);
+
+static inline void wpan_phy_put(struct wpan_phy *phy)
+{
+	put_device(&phy->dev);
+}
+
 static inline const char *wpan_phy_name(struct wpan_phy *phy)
 {
 	return dev_name(&phy->dev);
diff --git a/include/net/x25.h b/include/net/x25.h
index 2cda040..9baa07d 100644
--- a/include/net/x25.h
+++ b/include/net/x25.h
@@ -287,8 +287,14 @@
 extern void x25_check_rbuf(struct sock *);
 
 /* sysctl_net_x25.c */
+#ifdef CONFIG_SYSCTL
 extern void x25_register_sysctl(void);
 extern void x25_unregister_sysctl(void);
+#else
+static inline void x25_register_sysctl(void) {};
+static inline void x25_unregister_sysctl(void) {};
+#endif /* CONFIG_SYSCTL */
+
 struct x25_skb_cb {
 	unsigned flags;
 };
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 223e90a..6d85861 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -19,6 +19,9 @@
 #include <net/route.h>
 #include <net/ipv6.h>
 #include <net/ip6_fib.h>
+
+#include <linux/interrupt.h>
+
 #ifdef CONFIG_XFRM_STATISTICS
 #include <net/snmp.h>
 #endif
@@ -121,8 +124,7 @@
 };
 
 /* Full description of state of transformer. */
-struct xfrm_state
-{
+struct xfrm_state {
 #ifdef CONFIG_NET_NS
 	struct net		*xs_net;
 #endif
@@ -160,7 +162,7 @@
 	struct xfrm_lifetime_cfg lft;
 
 	/* Data for transformer */
-	struct xfrm_algo	*aalg;
+	struct xfrm_algo_auth	*aalg;
 	struct xfrm_algo	*ealg;
 	struct xfrm_algo	*calg;
 	struct xfrm_algo_aead	*aead;
@@ -199,7 +201,7 @@
 	struct xfrm_stats	stats;
 
 	struct xfrm_lifetime_cur curlft;
-	struct timer_list	timer;
+	struct tasklet_hrtimer	mtimer;
 
 	/* Last used time */
 	unsigned long		lastused;
@@ -237,8 +239,7 @@
 };
 
 /* callback structure passed from either netlink or pfkey */
-struct km_event
-{
+struct km_event {
 	union {
 		u32 hard;
 		u32 proto;
@@ -313,8 +314,7 @@
 
 extern void xfrm_state_delete_tunnel(struct xfrm_state *x);
 
-struct xfrm_type
-{
+struct xfrm_type {
 	char			*description;
 	struct module		*owner;
 	__u8			proto;
@@ -420,8 +420,7 @@
 		return x->inner_mode_iaf;
 }
 
-struct xfrm_tmpl
-{
+struct xfrm_tmpl {
 /* id in template is interpreted as:
  * daddr - destination of tunnel, may be zero for transport mode.
  * spi   - zero to acquire spi. Not zero if spi is static, then
@@ -468,8 +467,7 @@
 	u32 seq;
 };
 
-struct xfrm_policy
-{
+struct xfrm_policy {
 #ifdef CONFIG_NET_NS
 	struct net		*xp_net;
 #endif
@@ -538,8 +536,7 @@
 /* default seq threshold size */
 #define XFRM_AE_SEQT_SIZE		2
 
-struct xfrm_mgr
-{
+struct xfrm_mgr {
 	struct list_head	list;
 	char			*id;
 	int			(*notify)(struct xfrm_state *x, struct km_event *c);
@@ -626,8 +623,7 @@
 #define XFRM_SPI_SKB_CB(__skb) ((struct xfrm_spi_skb_cb *)&((__skb)->cb[0]))
 
 /* Audit Information */
-struct xfrm_audit
-{
+struct xfrm_audit {
 	u32	secid;
 	uid_t	loginuid;
 	u32	sessionid;
@@ -871,8 +867,7 @@
  * bundles differing by session id. All the bundles grow from a parent
  * policy rule.
  */
-struct xfrm_dst
-{
+struct xfrm_dst {
 	union {
 		struct dst_entry	dst;
 		struct rtable		rt;
@@ -907,8 +902,7 @@
 
 extern void xfrm_dst_ifdown(struct dst_entry *dst, struct net_device *dev);
 
-struct sec_path
-{
+struct sec_path {
 	atomic_t		refcnt;
 	int			len;
 	struct xfrm_state	*xvec[XFRM_MAX_DEPTH];
@@ -1500,9 +1494,6 @@
 typedef int (icv_update_fn_t)(struct hash_desc *, struct scatterlist *,
 			      unsigned int);
 
-extern int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *tfm,
-			int offset, int len, icv_update_fn_t icv_update);
-
 static inline int xfrm_addr_cmp(xfrm_address_t *a, xfrm_address_t *b,
 				int family)
 {
@@ -1541,12 +1532,22 @@
 	return sizeof(*alg) + ((alg->alg_key_len + 7) / 8);
 }
 
+static inline int xfrm_alg_auth_len(struct xfrm_algo_auth *alg)
+{
+	return sizeof(*alg) + ((alg->alg_key_len + 7) / 8);
+}
+
 #ifdef CONFIG_XFRM_MIGRATE
 static inline struct xfrm_algo *xfrm_algo_clone(struct xfrm_algo *orig)
 {
 	return kmemdup(orig, xfrm_alg_len(orig), GFP_KERNEL);
 }
 
+static inline struct xfrm_algo_auth *xfrm_algo_auth_clone(struct xfrm_algo_auth *orig)
+{
+	return kmemdup(orig, xfrm_alg_auth_len(orig), GFP_KERNEL);
+}
+
 static inline void xfrm_states_put(struct xfrm_state **states, int n)
 {
 	int i;
diff --git a/include/pcmcia/cs.h b/include/pcmcia/cs.h
index 904468a..afc2bfb 100644
--- a/include/pcmcia/cs.h
+++ b/include/pcmcia/cs.h
@@ -15,6 +15,10 @@
 #ifndef _LINUX_CS_H
 #define _LINUX_CS_H
 
+#ifdef __KERNEL__
+#include <linux/interrupt.h>
+#endif
+
 /* For AccessConfigurationRegister */
 typedef struct conf_reg_t {
     u_char	Function;
@@ -111,11 +115,9 @@
 
 /* For RequestIRQ and ReleaseIRQ */
 typedef struct irq_req_t {
-    u_int	Attributes;
-    u_int	AssignedIRQ;
-    u_int	IRQInfo1, IRQInfo2; /* IRQInfo2 is ignored */
-    void	*Handler;
-    void	*Instance;
+	u_int		Attributes;
+	u_int		AssignedIRQ;
+	irq_handler_t	Handler;
 } irq_req_t;
 
 /* Attributes for RequestIRQ and ReleaseIRQ */
@@ -125,7 +127,7 @@
 #define IRQ_TYPE_DYNAMIC_SHARING	0x02
 #define IRQ_FORCED_PULSE		0x04
 #define IRQ_FIRST_SHARED		0x08
-#define IRQ_HANDLE_PRESENT		0x10
+//#define IRQ_HANDLE_PRESENT		0x10
 #define IRQ_PULSE_ALLOCATED		0x100
 
 /* Bits in IRQInfo1 field */
diff --git a/include/pcmcia/cs_types.h b/include/pcmcia/cs_types.h
index 315965a..f5e3b83 100644
--- a/include/pcmcia/cs_types.h
+++ b/include/pcmcia/cs_types.h
@@ -26,8 +26,7 @@
 typedef u_char	cisdata_t;
 typedef u_short	page_t;
 
-struct window_t;
-typedef struct window_t *window_handle_t;
+typedef unsigned long window_handle_t;
 
 struct region_t;
 typedef struct region_t *memory_handle_t;
diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h
index a2be80b..d403c12 100644
--- a/include/pcmcia/ds.h
+++ b/include/pcmcia/ds.h
@@ -34,6 +34,7 @@
 struct pcmcia_socket;
 struct pcmcia_device;
 struct config_t;
+struct net_device;
 
 /* dynamic device IDs for PCMCIA device drivers. See
  * Documentation/pcmcia/driver.txt for details.
@@ -137,65 +138,39 @@
 #define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev)
 #define to_pcmcia_drv(n) container_of(n, struct pcmcia_driver, drv)
 
-/* deprecated -- don't use! */
-#define handle_to_dev(handle) (handle->dev)
 
-
-/* (deprecated) error reporting by PCMCIA devices. Use dev_printk()
- * or dev_dbg() directly in the driver, without referring to pcmcia_error_func()
- * and/or pcmcia_error_ret() for those functions will go away soon.
+/*
+ * CIS access.
+ *
+ * Please use the following functions to access CIS tuples:
+ * - pcmcia_get_tuple()
+ * - pcmcia_loop_tuple()
+ * - pcmcia_get_mac_from_cis()
+ *
+ * To parse a tuple_t, pcmcia_parse_tuple() exists. Its interface
+ * might change in future.
  */
-enum service {
-    AccessConfigurationRegister, AddSocketServices,
-    AdjustResourceInfo, CheckEraseQueue, CloseMemory, CopyMemory,
-    DeregisterClient, DeregisterEraseQueue, GetCardServicesInfo,
-    GetClientInfo, GetConfigurationInfo, GetEventMask,
-    GetFirstClient, GetFirstPartion, GetFirstRegion, GetFirstTuple,
-    GetNextClient, GetNextPartition, GetNextRegion, GetNextTuple,
-    GetStatus, GetTupleData, MapLogSocket, MapLogWindow, MapMemPage,
-    MapPhySocket, MapPhyWindow, ModifyConfiguration, ModifyWindow,
-    OpenMemory, ParseTuple, ReadMemory, RegisterClient,
-    RegisterEraseQueue, RegisterMTD, RegisterTimer,
-    ReleaseConfiguration, ReleaseExclusive, ReleaseIO, ReleaseIRQ,
-    ReleaseSocketMask, ReleaseWindow, ReplaceSocketServices,
-    RequestConfiguration, RequestExclusive, RequestIO, RequestIRQ,
-    RequestSocketMask, RequestWindow, ResetCard, ReturnSSEntry,
-    SetEventMask, SetRegion, ValidateCIS, VendorSpecific,
-    WriteMemory, BindDevice, BindMTD, ReportError,
-    SuspendCard, ResumeCard, EjectCard, InsertCard, ReplaceCIS,
-    GetFirstWindow, GetNextWindow, GetMemPage
-};
-const char *pcmcia_error_func(int func);
-const char *pcmcia_error_ret(int ret);
 
-#define cs_error(p_dev, func, ret)			\
-	{						\
-		dev_printk(KERN_NOTICE, &p_dev->dev,	\
-			   "%s : %s\n",			\
-			   pcmcia_error_func(func),	\
-			   pcmcia_error_ret(ret));	\
-	}
+/* get the very first CIS entry of type @code. Note that buf is pointer
+ * to u8 *buf; and that you need to kfree(buf) afterwards. */
+size_t pcmcia_get_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+			u8 **buf);
 
-/* CIS access.
- * Use the pcmcia_* versions in PCMCIA drivers
- */
+/* loop over CIS entries */
+int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code,
+		      int (*loop_tuple) (struct pcmcia_device *p_dev,
+					 tuple_t *tuple,
+					 void *priv_data),
+		      void *priv_data);
+
+/* get the MAC address from CISTPL_FUNCE */
+int pcmcia_get_mac_from_cis(struct pcmcia_device *p_dev,
+			    struct net_device *dev);
+
+
+/* parse a tuple_t */
 int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse);
 
-int pccard_get_first_tuple(struct pcmcia_socket *s, unsigned int function,
-			   tuple_t *tuple);
-#define pcmcia_get_first_tuple(p_dev, tuple) \
-		pccard_get_first_tuple(p_dev->socket, p_dev->func, tuple)
-
-int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int function,
-			  tuple_t *tuple);
-#define pcmcia_get_next_tuple(p_dev, tuple) \
-		pccard_get_next_tuple(p_dev->socket, p_dev->func, tuple)
-
-int pccard_get_tuple_data(struct pcmcia_socket *s, tuple_t *tuple);
-#define pcmcia_get_tuple_data(p_dev, tuple) \
-		pccard_get_tuple_data(p_dev->socket, tuple)
-
-
 /* loop CIS entries for valid configuration */
 int pcmcia_loop_config(struct pcmcia_device *p_dev,
 		       int	(*conf_check)	(struct pcmcia_device *p_dev,
@@ -221,12 +196,11 @@
 int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 				 config_req_t *req);
 
-int pcmcia_request_window(struct pcmcia_device **p_dev, win_req_t *req,
+int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req,
 			  window_handle_t *wh);
-int pcmcia_release_window(window_handle_t win);
-
-int pcmcia_get_mem_page(window_handle_t win, memreq_t *req);
-int pcmcia_map_mem_page(window_handle_t win, memreq_t *req);
+int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t win);
+int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t win,
+			memreq_t *req);
 
 int pcmcia_modify_configuration(struct pcmcia_device *p_dev, modconf_t *mod);
 void pcmcia_disable_device(struct pcmcia_device *p_dev);
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index e0f6feb..7c23be7 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -107,15 +107,6 @@
 	struct resource		*res;
 } io_window_t;
 
-#define WINDOW_MAGIC	0xB35C
-typedef struct window_t {
-	u_short			magic;
-	u_short			index;
-	struct pcmcia_device	*handle;
-	struct pcmcia_socket 	*sock;
-	pccard_mem_map		ctl;
-} window_t;
-
 /* Maximum number of IO windows per socket */
 #define MAX_IO_WIN 2
 
@@ -155,7 +146,7 @@
 		u_int			Config;
 	} irq;
 	io_window_t			io[MAX_IO_WIN];
-	window_t			win[MAX_WIN];
+	pccard_mem_map			win[MAX_WIN];
 	struct list_head		cis_cache;
 	size_t				fake_cis_len;
 	u8				*fake_cis;
@@ -172,7 +163,7 @@
 	u_int				irq_mask;
 	u_int				map_size;
 	u_int				io_offset;
-	u_char				pci_irq;
+	u_int				pci_irq;
 	struct pci_dev *		cb_dev;
 
 
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 9af48cb..f097ae3 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -145,6 +145,7 @@
 	unsigned retry_hwerror:1;	/* Retry HARDWARE_ERROR */
 	unsigned last_sector_bug:1;	/* do not use multisector accesses on
 					   SD_LAST_BUGGY_SECTORS */
+	unsigned is_visible:1;	/* is the device visible in sysfs */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
 	struct list_head event_list;	/* asserted events */
diff --git a/include/sound/Kbuild b/include/sound/Kbuild
index fd054a3..e9dd936 100644
--- a/include/sound/Kbuild
+++ b/include/sound/Kbuild
@@ -2,7 +2,6 @@
 header-y += hdsp.h
 header-y += hdspm.h
 header-y += sfnt_info.h
-header-y += sscape_ioctl.h
 
 unifdef-y += asequencer.h
 unifdef-y += asound.h
diff --git a/include/sound/aci.h b/include/sound/aci.h
new file mode 100644
index 0000000..ee639d3
--- /dev/null
+++ b/include/sound/aci.h
@@ -0,0 +1,90 @@
+#ifndef _ACI_H_
+#define _ACI_H_
+
+#define ACI_REG_COMMAND		0	/* write register offset */
+#define ACI_REG_STATUS		1	/* read register offset */
+#define ACI_REG_BUSY		2	/* busy register offset */
+#define ACI_REG_RDS		2	/* PCM20: RDS register offset */
+#define ACI_MINTIME		500	/* ACI time out limit */
+
+#define ACI_SET_MUTE		0x0d
+#define ACI_SET_POWERAMP	0x0f
+#define ACI_SET_TUNERMUTE	0xa3
+#define ACI_SET_TUNERMONO	0xa4
+#define ACI_SET_IDE		0xd0
+#define ACI_SET_WSS		0xd1
+#define ACI_SET_SOLOMODE	0xd2
+#define ACI_SET_PREAMP		0x03
+#define ACI_GET_PREAMP		0x21
+#define ACI_WRITE_TUNE		0xa7
+#define ACI_READ_TUNERSTEREO	0xa8
+#define ACI_READ_TUNERSTATION	0xa9
+#define ACI_READ_VERSION	0xf1
+#define ACI_READ_IDCODE		0xf2
+#define ACI_INIT		0xff
+#define ACI_STATUS		0xf0
+#define ACI_S_GENERAL		0x00
+#define ACI_ERROR_OP		0xdf
+
+/* ACI Mixer */
+
+/* These are the values for the right channel GET registers.
+   Add an offset of 0x01 for the left channel register.
+   (left=right+0x01) */
+
+#define ACI_GET_MASTER		0x03
+#define ACI_GET_MIC		0x05
+#define ACI_GET_LINE		0x07
+#define ACI_GET_CD		0x09
+#define ACI_GET_SYNTH		0x0b
+#define ACI_GET_PCM		0x0d
+#define ACI_GET_LINE1		0x10	/* Radio on PCM20 */
+#define ACI_GET_LINE2		0x12
+
+#define ACI_GET_EQ1		0x22	/* from Bass ... */
+#define ACI_GET_EQ2		0x24
+#define ACI_GET_EQ3		0x26
+#define ACI_GET_EQ4		0x28
+#define ACI_GET_EQ5		0x2a
+#define ACI_GET_EQ6		0x2c
+#define ACI_GET_EQ7		0x2e	/* ... to Treble */
+
+/* And these are the values for the right channel SET registers.
+   For left channel access you have to add an offset of 0x08.
+   MASTER is an exception, which needs an offset of 0x01 */
+
+#define ACI_SET_MASTER		0x00
+#define ACI_SET_MIC		0x30
+#define ACI_SET_LINE		0x31
+#define ACI_SET_CD		0x34
+#define ACI_SET_SYNTH		0x33
+#define ACI_SET_PCM		0x32
+#define ACI_SET_LINE1		0x35	/* Radio on PCM20 */
+#define ACI_SET_LINE2		0x36
+
+#define ACI_SET_EQ1		0x40	/* from Bass ... */
+#define ACI_SET_EQ2		0x41
+#define ACI_SET_EQ3		0x42
+#define ACI_SET_EQ4		0x43
+#define ACI_SET_EQ5		0x44
+#define ACI_SET_EQ6		0x45
+#define ACI_SET_EQ7		0x46	/* ... to Treble */
+
+struct snd_miro_aci {
+	unsigned long aci_port;
+	int aci_vendor;
+	int aci_product;
+	int aci_version;
+	int aci_amp;
+	int aci_preamp;
+	int aci_solomode;
+
+	struct mutex aci_mutex;
+};
+
+int snd_aci_cmd(struct snd_miro_aci *aci, int write1, int write2, int write3);
+
+struct snd_miro_aci *snd_aci_get_aci(void);
+
+#endif  /* _ACI_H_ */
+
diff --git a/include/sound/ak4113.h b/include/sound/ak4113.h
new file mode 100644
index 0000000..8988eda
--- /dev/null
+++ b/include/sound/ak4113.h
@@ -0,0 +1,321 @@
+#ifndef __SOUND_AK4113_H
+#define __SOUND_AK4113_H
+
+/*
+ *  Routines for Asahi Kasei AK4113
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
+ *  Copyright (c) by Pavel Hofman <pavel.hofman@ivitera.com>,
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/* AK4113 registers */
+/* power down */
+#define AK4113_REG_PWRDN	0x00
+/* format control */
+#define AK4113_REG_FORMAT	0x01
+/* input/output control */
+#define AK4113_REG_IO0		0x02
+/* input/output control */
+#define AK4113_REG_IO1		0x03
+/* interrupt0 mask */
+#define AK4113_REG_INT0_MASK	0x04
+/* interrupt1 mask */
+#define AK4113_REG_INT1_MASK	0x05
+/* DAT mask & DTS select */
+#define AK4113_REG_DATDTS	0x06
+/* receiver status 0 */
+#define AK4113_REG_RCS0		0x07
+/* receiver status 1 */
+#define AK4113_REG_RCS1		0x08
+/* receiver status 2 */
+#define AK4113_REG_RCS2		0x09
+/* RX channel status byte 0 */
+#define AK4113_REG_RXCSB0	0x0a
+/* RX channel status byte 1 */
+#define AK4113_REG_RXCSB1	0x0b
+/* RX channel status byte 2 */
+#define AK4113_REG_RXCSB2	0x0c
+/* RX channel status byte 3 */
+#define AK4113_REG_RXCSB3	0x0d
+/* RX channel status byte 4 */
+#define AK4113_REG_RXCSB4	0x0e
+/* burst preamble Pc byte 0 */
+#define AK4113_REG_Pc0		0x0f
+/* burst preamble Pc byte 1 */
+#define AK4113_REG_Pc1		0x10
+/* burst preamble Pd byte 0 */
+#define AK4113_REG_Pd0		0x11
+/* burst preamble Pd byte 1 */
+#define AK4113_REG_Pd1		0x12
+/* Q-subcode address + control */
+#define AK4113_REG_QSUB_ADDR	0x13
+/* Q-subcode track */
+#define AK4113_REG_QSUB_TRACK	0x14
+/* Q-subcode index */
+#define AK4113_REG_QSUB_INDEX	0x15
+/* Q-subcode minute */
+#define AK4113_REG_QSUB_MINUTE	0x16
+/* Q-subcode second */
+#define AK4113_REG_QSUB_SECOND	0x17
+/* Q-subcode frame */
+#define AK4113_REG_QSUB_FRAME	0x18
+/* Q-subcode zero */
+#define AK4113_REG_QSUB_ZERO	0x19
+/* Q-subcode absolute minute */
+#define AK4113_REG_QSUB_ABSMIN	0x1a
+/* Q-subcode absolute second */
+#define AK4113_REG_QSUB_ABSSEC	0x1b
+/* Q-subcode absolute frame */
+#define AK4113_REG_QSUB_ABSFRM	0x1c
+
+/* sizes */
+#define AK4113_REG_RXCSB_SIZE	((AK4113_REG_RXCSB4-AK4113_REG_RXCSB0)+1)
+#define AK4113_REG_QSUB_SIZE	((AK4113_REG_QSUB_ABSFRM-AK4113_REG_QSUB_ADDR)\
+		+1)
+
+#define AK4113_WRITABLE_REGS	(AK4113_REG_DATDTS + 1)
+
+/* AK4113_REG_PWRDN bits */
+/* Channel Status Select */
+#define AK4113_CS12		(1<<7)
+/* Block Start & C/U Output Mode */
+#define AK4113_BCU		(1<<6)
+/* Master Clock Operation Select */
+#define AK4113_CM1		(1<<5)
+/* Master Clock Operation Select */
+#define AK4113_CM0		(1<<4)
+/* Master Clock Frequency Select */
+#define AK4113_OCKS1		(1<<3)
+/* Master Clock Frequency Select */
+#define AK4113_OCKS0		(1<<2)
+/* 0 = power down, 1 = normal operation */
+#define AK4113_PWN		(1<<1)
+/* 0 = reset & initialize (except thisregister), 1 = normal operation */
+#define AK4113_RST		(1<<0)
+
+/* AK4113_REQ_FORMAT bits */
+/* V/TX Output select: 0 = Validity Flag Output, 1 = TX */
+#define AK4113_VTX		(1<<7)
+/* Audio Data Control */
+#define AK4113_DIF2		(1<<6)
+/* Audio Data Control */
+#define AK4113_DIF1		(1<<5)
+/* Audio Data Control */
+#define AK4113_DIF0		(1<<4)
+/* Deemphasis Autodetect Enable (1 = enable) */
+#define AK4113_DEAU		(1<<3)
+/* 32kHz-48kHz Deemphasis Control */
+#define AK4113_DEM1		(1<<2)
+/* 32kHz-48kHz Deemphasis Control */
+#define AK4113_DEM0		(1<<1)
+#define AK4113_DEM_OFF		(AK4113_DEM0)
+#define AK4113_DEM_44KHZ	(0)
+#define AK4113_DEM_48KHZ	(AK4113_DEM1)
+#define AK4113_DEM_32KHZ	(AK4113_DEM0|AK4113_DEM1)
+/* STDO: 16-bit, right justified */
+#define AK4113_DIF_16R		(0)
+/* STDO: 18-bit, right justified */
+#define AK4113_DIF_18R		(AK4113_DIF0)
+/* STDO: 20-bit, right justified */
+#define AK4113_DIF_20R		(AK4113_DIF1)
+/* STDO: 24-bit, right justified */
+#define AK4113_DIF_24R		(AK4113_DIF1|AK4113_DIF0)
+/* STDO: 24-bit, left justified */
+#define AK4113_DIF_24L		(AK4113_DIF2)
+/* STDO: I2S */
+#define AK4113_DIF_24I2S	(AK4113_DIF2|AK4113_DIF0)
+/* STDO: 24-bit, left justified; LRCLK, BICK = Input */
+#define AK4113_DIF_I24L		(AK4113_DIF2|AK4113_DIF1)
+/* STDO: I2S;  LRCLK, BICK = Input */
+#define AK4113_DIF_I24I2S	(AK4113_DIF2|AK4113_DIF1|AK4113_DIF0)
+
+/* AK4113_REG_IO0 */
+/* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
+#define AK4113_XTL1		(1<<6)
+/* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
+#define AK4113_XTL0		(1<<5)
+/* Block Start Signal Output: 0 = U-bit, 1 = C-bit (req. BCU = 1) */
+#define AK4113_UCE		(1<<4)
+/* TX Output Enable (1 = enable) */
+#define AK4113_TXE		(1<<3)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS2		(1<<2)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS1		(1<<1)
+/* Output Through Data Selector for TX pin */
+#define AK4113_OPS0		(1<<0)
+/* 11.2896 MHz ref. Xtal freq. */
+#define AK4113_XTL_11_2896M	(0)
+/* 12.288 MHz ref. Xtal freq. */
+#define AK4113_XTL_12_288M	(AK4113_XTL0)
+/* 24.576 MHz ref. Xtal freq. */
+#define AK4113_XTL_24_576M	(AK4113_XTL1)
+
+/* AK4113_REG_IO1 */
+/* Interrupt 0 pin Hold */
+#define AK4113_EFH1		(1<<7)
+/* Interrupt 0 pin Hold */
+#define AK4113_EFH0		(1<<6)
+#define AK4113_EFH_512LRCLK	(0)
+#define AK4113_EFH_1024LRCLK	(AK4113_EFH0)
+#define AK4113_EFH_2048LRCLK	(AK4113_EFH1)
+#define AK4113_EFH_4096LRCLK	(AK4113_EFH1|AK4113_EFH0)
+/* PLL Lock Time: 0 = 384/fs, 1 = 1/fs */
+#define AK4113_FAST		(1<<5)
+/* MCKO2 Output Select: 0 = CMx/OCKSx, 1 = Xtal */
+#define AK4113_XMCK		(1<<4)
+/* MCKO2 Output Freq. Select: 0 = x1, 1 = x0.5  (req. XMCK = 1) */
+#define AK4113_DIV		(1<<3)
+/* Input Recovery Data Select */
+#define AK4113_IPS2		(1<<2)
+/* Input Recovery Data Select */
+#define AK4113_IPS1		(1<<1)
+/* Input Recovery Data Select */
+#define AK4113_IPS0		(1<<0)
+#define AK4113_IPS(x)		((x)&7)
+
+/* AK4113_REG_INT0_MASK && AK4113_REG_INT1_MASK*/
+/* mask enable for QINT bit */
+#define AK4113_MQI		(1<<7)
+/* mask enable for AUTO bit */
+#define AK4113_MAUT		(1<<6)
+/* mask enable for CINT bit */
+#define AK4113_MCIT		(1<<5)
+/* mask enable for UNLOCK bit */
+#define AK4113_MULK		(1<<4)
+/* mask enable for V bit */
+#define AK4113_V		(1<<3)
+/* mask enable for STC bit */
+#define AK4113_STC		(1<<2)
+/* mask enable for AUDN bit */
+#define AK4113_MAN		(1<<1)
+/* mask enable for PAR bit */
+#define AK4113_MPR		(1<<0)
+
+/* AK4113_REG_DATDTS */
+/* DAT Start ID Counter */
+#define AK4113_DCNT		(1<<4)
+/* DTS-CD 16-bit Sync Word Detect */
+#define AK4113_DTS16		(1<<3)
+/* DTS-CD 14-bit Sync Word Detect */
+#define AK4113_DTS14		(1<<2)
+/* mask enable for DAT bit (if 1, no INT1 effect */
+#define AK4113_MDAT1		(1<<1)
+/* mask enable for DAT bit (if 1, no INT0 effect */
+#define AK4113_MDAT0		(1<<0)
+
+/* AK4113_REG_RCS0 */
+/* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
+#define AK4113_QINT		(1<<7)
+/* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
+#define AK4113_AUTO		(1<<6)
+/* channel status buffer interrupt, 0 = no change, 1 = change */
+#define AK4113_CINT		(1<<5)
+/* PLL lock status, 0 = lock, 1 = unlock */
+#define AK4113_UNLCK		(1<<4)
+/* Validity bit, 0 = valid, 1 = invalid */
+#define AK4113_V		(1<<3)
+/* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
+#define AK4113_STC		(1<<2)
+/* audio bit output, 0 = audio, 1 = non-audio */
+#define AK4113_AUDION		(1<<1)
+/* parity error or biphase error status, 0 = no error, 1 = error */
+#define AK4113_PAR		(1<<0)
+
+/* AK4113_REG_RCS1 */
+/* sampling frequency detection */
+#define AK4113_FS3		(1<<7)
+#define AK4113_FS2		(1<<6)
+#define AK4113_FS1		(1<<5)
+#define AK4113_FS0		(1<<4)
+/* Pre-emphasis detect, 0 = OFF, 1 = ON */
+#define AK4113_PEM		(1<<3)
+/* DAT Start ID Detect, 0 = no detect, 1 = detect */
+#define AK4113_DAT		(1<<2)
+/* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
+#define AK4113_DTSCD		(1<<1)
+/* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
+#define AK4113_NPCM		(1<<0)
+#define AK4113_FS_8000HZ	(AK4113_FS3|AK4113_FS0)
+#define AK4113_FS_11025HZ	(AK4113_FS2|AK4113_FS0)
+#define AK4113_FS_16000HZ	(AK4113_FS2|AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_22050HZ	(AK4113_FS2)
+#define AK4113_FS_24000HZ	(AK4113_FS2|AK4113_FS1)
+#define AK4113_FS_32000HZ	(AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_44100HZ	(0)
+#define AK4113_FS_48000HZ	(AK4113_FS1)
+#define AK4113_FS_64000HZ	(AK4113_FS3|AK4113_FS1|AK4113_FS0)
+#define AK4113_FS_88200HZ	(AK4113_FS3)
+#define AK4113_FS_96000HZ	(AK4113_FS3|AK4113_FS1)
+#define AK4113_FS_176400HZ	(AK4113_FS3|AK4113_FS2)
+#define AK4113_FS_192000HZ	(AK4113_FS3|AK4113_FS2|AK4113_FS1)
+
+/* AK4113_REG_RCS2 */
+/* CRC for Q-subcode, 0 = no error, 1 = error */
+#define AK4113_QCRC		(1<<1)
+/* CRC for channel status, 0 = no error, 1 = error */
+#define AK4113_CCRC		(1<<0)
+
+/* flags for snd_ak4113_check_rate_and_errors() */
+#define AK4113_CHECK_NO_STAT	(1<<0)	/* no statistics */
+#define AK4113_CHECK_NO_RATE	(1<<1)	/* no rate check */
+
+#define AK4113_CONTROLS		13
+
+typedef void (ak4113_write_t)(void *private_data, unsigned char addr,
+		unsigned char data);
+typedef unsigned char (ak4113_read_t)(void *private_data, unsigned char addr);
+
+struct ak4113 {
+	struct snd_card *card;
+	ak4113_write_t *write;
+	ak4113_read_t *read;
+	void *private_data;
+	unsigned int init:1;
+	spinlock_t lock;
+	unsigned char regmap[AK4113_WRITABLE_REGS];
+	struct snd_kcontrol *kctls[AK4113_CONTROLS];
+	struct snd_pcm_substream *substream;
+	unsigned long parity_errors;
+	unsigned long v_bit_errors;
+	unsigned long qcrc_errors;
+	unsigned long ccrc_errors;
+	unsigned char rcs0;
+	unsigned char rcs1;
+	unsigned char rcs2;
+	struct delayed_work work;
+	unsigned int check_flags;
+	void *change_callback_private;
+	void (*change_callback)(struct ak4113 *ak4113, unsigned char c0,
+			unsigned char c1);
+};
+
+int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
+		ak4113_write_t *write,
+		const unsigned char pgm[AK4113_WRITABLE_REGS],
+		void *private_data, struct ak4113 **r_ak4113);
+void snd_ak4113_reg_write(struct ak4113 *ak4113, unsigned char reg,
+		unsigned char mask, unsigned char val);
+void snd_ak4113_reinit(struct ak4113 *ak4113);
+int snd_ak4113_build(struct ak4113 *ak4113,
+		struct snd_pcm_substream *capture_substream);
+int snd_ak4113_external_rate(struct ak4113 *ak4113);
+int snd_ak4113_check_rate_and_errors(struct ak4113 *ak4113, unsigned int flags);
+
+#endif /* __SOUND_AK4113_H */
+
diff --git a/include/sound/ak4114.h b/include/sound/ak4114.h
index d293d36..3ce69fd 100644
--- a/include/sound/ak4114.h
+++ b/include/sound/ak4114.h
@@ -95,13 +95,13 @@
 
 /* AK4114_REG_IO0 */
 #define AK4114_TX1E		(1<<7)	/* TX1 Output Enable (1 = enable) */
-#define AK4114_OPS12		(1<<2)	/* Output Though Data Selector for TX1 pin */
-#define AK4114_OPS11		(1<<1)	/* Output Though Data Selector for TX1 pin */
-#define AK4114_OPS10		(1<<0)	/* Output Though Data Selector for TX1 pin */
+#define AK4114_OPS12		(1<<6)	/* Output Data Selector for TX1 pin */
+#define AK4114_OPS11		(1<<5)	/* Output Data Selector for TX1 pin */
+#define AK4114_OPS10		(1<<4)	/* Output Data Selector for TX1 pin */
 #define AK4114_TX0E		(1<<3)	/* TX0 Output Enable (1 = enable) */
-#define AK4114_OPS02		(1<<2)	/* Output Though Data Selector for TX0 pin */
-#define AK4114_OPS01		(1<<1)	/* Output Though Data Selector for TX0 pin */
-#define AK4114_OPS00		(1<<0)	/* Output Though Data Selector for TX0 pin */
+#define AK4114_OPS02		(1<<2)	/* Output Data Selector for TX0 pin */
+#define AK4114_OPS01		(1<<1)	/* Output Data Selector for TX0 pin */
+#define AK4114_OPS00		(1<<0)	/* Output Data Selector for TX0 pin */
 
 /* AK4114_REG_IO1 */
 #define AK4114_EFH1		(1<<7)	/* Interrupt 0 pin Hold */
diff --git a/include/sound/ak4xxx-adda.h b/include/sound/ak4xxx-adda.h
index 891cf1a..030b87c 100644
--- a/include/sound/ak4xxx-adda.h
+++ b/include/sound/ak4xxx-adda.h
@@ -68,7 +68,7 @@
 	enum {
 		SND_AK4524, SND_AK4528, SND_AK4529,
 		SND_AK4355, SND_AK4358, SND_AK4381,
-		SND_AK5365
+		SND_AK5365, SND_AK4620,
 	} type;
 
 	/* (array) information of combined codecs */
@@ -76,6 +76,9 @@
 	const struct snd_akm4xxx_adc_channel *adc_info;
 
 	struct snd_ak4xxx_ops ops;
+	unsigned int num_chips;
+	unsigned int total_regs;
+	const char *name;
 };
 
 void snd_akm4xxx_write(struct snd_akm4xxx *ak, int chip, unsigned char reg,
diff --git a/include/sound/control.h b/include/sound/control.h
index ef96f07..112374d 100644
--- a/include/sound/control.h
+++ b/include/sound/control.h
@@ -56,7 +56,6 @@
 
 struct snd_kcontrol_volatile {
 	struct snd_ctl_file *owner;	/* locked */
-	pid_t owner_pid;
 	unsigned int access;	/* access rights */
 };
 
@@ -87,10 +86,12 @@
 
 #define snd_kctl_event(n) list_entry(n, struct snd_kctl_event, list)
 
+struct pid;
+
 struct snd_ctl_file {
 	struct list_head list;		/* list of all control files */
 	struct snd_card *card;
-	pid_t pid;
+	struct pid *pid;
 	int prefer_pcm_subdevice;
 	int prefer_rawmidi_subdevice;
 	wait_queue_head_t change_sleep;
diff --git a/include/sound/cs4231-regs.h b/include/sound/cs4231-regs.h
index 9264753..66d28c2 100644
--- a/include/sound/cs4231-regs.h
+++ b/include/sound/cs4231-regs.h
@@ -70,7 +70,6 @@
 #define AD1845_PWR_DOWN		0x1b	/* power down control */
 #define CS4235_LEFT_MASTER	0x1b	/* left master output control */
 #define CS4231_REC_FORMAT	0x1c	/* clock and data format - record - bits 7-0 MCE */
-#define CS4231_PLY_VAR_FREQ	0x1d	/* playback variable frequency */
 #define AD1845_CLOCK		0x1d	/* crystal clock select and total power down */
 #define CS4235_RIGHT_MASTER	0x1d	/* right master output control */
 #define CS4231_REC_UPR_CNT	0x1e	/* record upper count */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index de6d981..c83a4a7 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -348,6 +348,8 @@
 	int count;
 };
 
+struct pid;
+
 struct snd_pcm_substream {
 	struct snd_pcm *pcm;
 	struct snd_pcm_str *pstr;
@@ -379,6 +381,7 @@
 	atomic_t mmap_count;
 	unsigned int f_flags;
 	void (*pcm_release)(struct snd_pcm_substream *);
+	struct pid *pid;
 #if defined(CONFIG_SND_PCM_OSS) || defined(CONFIG_SND_PCM_OSS_MODULE)
 	/* -- OSS things -- */
 	struct snd_pcm_oss_substream oss;
diff --git a/include/sound/rawmidi.h b/include/sound/rawmidi.h
index c23c265..2480e7d 100644
--- a/include/sound/rawmidi.h
+++ b/include/sound/rawmidi.h
@@ -46,6 +46,7 @@
 struct snd_rawmidi;
 struct snd_rawmidi_substream;
 struct snd_seq_port_info;
+struct pid;
 
 struct snd_rawmidi_ops {
 	int (*open) (struct snd_rawmidi_substream * substream);
@@ -97,6 +98,7 @@
 	struct snd_rawmidi_str *pstr;
 	char name[32];
 	struct snd_rawmidi_runtime *runtime;
+	struct pid *pid;
 	/* hardware layer */
 	struct snd_rawmidi_ops *ops;
 };
diff --git a/include/sound/sh_dac_audio.h b/include/sound/sh_dac_audio.h
new file mode 100644
index 0000000..f5deaf1
--- /dev/null
+++ b/include/sound/sh_dac_audio.h
@@ -0,0 +1,21 @@
+/*
+ * SH_DAC specific configuration, for the dac_audio platform_device
+ *
+ * Copyright (C) 2009 Rafael Ignacio Zurita <rizurita@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_SH_DAC_AUDIO_H
+#define __INCLUDE_SH_DAC_AUDIO_H
+
+struct dac_audio_pdata {
+	int buffer_size;
+	int channel;
+	void (*start)(struct dac_audio_pdata *pd);
+	void (*stop)(struct dac_audio_pdata *pd);
+};
+
+#endif /* __INCLUDE_SH_DAC_AUDIO_H */
diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h
index 97ca9af..ca24e7f 100644
--- a/include/sound/soc-dai.h
+++ b/include/sound/soc-dai.h
@@ -30,6 +30,7 @@
 #define SND_SOC_DAIFMT_DSP_A		3 /* L data MSB after FRM LRC */
 #define SND_SOC_DAIFMT_DSP_B		4 /* L data MSB during FRM LRC */
 #define SND_SOC_DAIFMT_AC97		5 /* AC97 */
+#define SND_SOC_DAIFMT_PDM		6 /* Pulse density modulation */
 
 /* left and right justified also known as MSB and LSB respectively */
 #define SND_SOC_DAIFMT_MSB		SND_SOC_DAIFMT_LEFT_J
@@ -106,7 +107,7 @@
 	int div_id, int div);
 
 int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
-	int pll_id, unsigned int freq_in, unsigned int freq_out);
+	int pll_id, int source, unsigned int freq_in, unsigned int freq_out);
 
 /* Digital Audio interface formatting */
 int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
@@ -114,6 +115,10 @@
 int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
 	unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width);
 
+int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai,
+	unsigned int tx_num, unsigned int *tx_slot,
+	unsigned int rx_num, unsigned int *rx_slot);
+
 int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
 
 /* Digital Audio Interface mute */
@@ -136,8 +141,8 @@
 	 */
 	int (*set_sysclk)(struct snd_soc_dai *dai,
 		int clk_id, unsigned int freq, int dir);
-	int (*set_pll)(struct snd_soc_dai *dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out);
+	int (*set_pll)(struct snd_soc_dai *dai, int pll_id, int source,
+		unsigned int freq_in, unsigned int freq_out);
 	int (*set_clkdiv)(struct snd_soc_dai *dai, int div_id, int div);
 
 	/*
@@ -148,6 +153,9 @@
 	int (*set_tdm_slot)(struct snd_soc_dai *dai,
 		unsigned int tx_mask, unsigned int rx_mask,
 		int slots, int slot_width);
+	int (*set_channel_map)(struct snd_soc_dai *dai,
+		unsigned int tx_num, unsigned int *tx_slot,
+		unsigned int rx_num, unsigned int *rx_slot);
 	int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
 
 	/*
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index c1410e3..c5c95e1d 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -206,6 +206,12 @@
  	.get = snd_soc_dapm_get_enum_double, \
  	.put = snd_soc_dapm_put_enum_double, \
   	.private_value = (unsigned long)&xenum }
+#define SOC_DAPM_ENUM_VIRT(xname, xenum)		    \
+{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+	.info = snd_soc_info_enum_double, \
+	.get = snd_soc_dapm_get_enum_virt, \
+	.put = snd_soc_dapm_put_enum_virt, \
+	.private_value = (unsigned long)&xenum }
 #define SOC_DAPM_VALUE_ENUM(xname, xenum) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 	.info = snd_soc_info_enum_double, \
@@ -260,6 +266,10 @@
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_get_enum_virt(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
+int snd_soc_dapm_put_enum_virt(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
@@ -333,6 +343,10 @@
 	const char *sink;
 	const char *control;
 	const char *source;
+
+	/* Note: currently only supported for links where source is a supply */
+	int (*connected)(struct snd_soc_dapm_widget *source,
+			 struct snd_soc_dapm_widget *sink);
 };
 
 /* dapm audio path between two widgets */
@@ -349,6 +363,9 @@
 	u32 connect:1;	/* source and sink widgets are connected */
 	u32 walked:1;	/* path has been walked */
 
+	int (*connected)(struct snd_soc_dapm_widget *source,
+			 struct snd_soc_dapm_widget *sink);
+
 	struct list_head list_source;
 	struct list_head list_sink;
 	struct list_head list;
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 475cb7e..0d7718f9 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -223,15 +223,15 @@
 			       int addr_bits, int data_bits,
 			       enum snd_soc_control_type control);
 
-#ifdef CONFIG_PM
-int snd_soc_suspend_device(struct device *dev);
-int snd_soc_resume_device(struct device *dev);
-#endif
-
 /* pcm <-> DAI connect */
 void snd_soc_free_pcms(struct snd_soc_device *socdev);
 int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid);
-int snd_soc_init_card(struct snd_soc_device *socdev);
+
+/* Utility functions to get clock rates from various things */
+int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots);
+int snd_soc_params_to_frame_size(struct snd_pcm_hw_params *params);
+int snd_soc_calc_bclk(int fs, int sample_size, int channels, int tdm_slots);
+int snd_soc_params_to_bclk(struct snd_pcm_hw_params *parms);
 
 /* set runtime hw params */
 int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream,
@@ -333,6 +333,8 @@
 	int debounce_time;
 	struct snd_soc_jack *jack;
 	struct work_struct work;
+
+	int (*jack_status_check)(void);
 };
 #endif
 
@@ -413,6 +415,7 @@
 	unsigned int num_dai;
 
 #ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs_codec_root;
 	struct dentry *debugfs_reg;
 	struct dentry *debugfs_pop_time;
 	struct dentry *debugfs_dapm;
diff --git a/include/sound/sscape_ioctl.h b/include/sound/sscape_ioctl.h
deleted file mode 100644
index 0d88859..0000000
--- a/include/sound/sscape_ioctl.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef SSCAPE_IOCTL_H
-#define SSCAPE_IOCTL_H
-
-
-struct sscape_bootblock
-{
-  unsigned char code[256];
-  unsigned version;
-};
-
-#define SSCAPE_MICROCODE_SIZE  65536
-
-struct sscape_microcode
-{
-  unsigned char __user *code;
-};
-
-#define SND_SSCAPE_LOAD_BOOTB  _IOWR('P', 100, struct sscape_bootblock)
-#define SND_SSCAPE_LOAD_MCODE  _IOW ('P', 101, struct sscape_microcode)
-
-#endif
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h
new file mode 100644
index 0000000..5858d06
--- /dev/null
+++ b/include/sound/tlv320dac33-plat.h
@@ -0,0 +1,20 @@
+/*
+ * Platform header for Texas Instruments TLV320DAC33 codec driver
+ *
+ * Author:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __TLV320DAC33_PLAT_H
+#define __TLV320DAC33_PLAT_H
+
+struct tlv320dac33_platform_data {
+	int power_gpio;
+};
+
+#endif /* __TLV320DAC33_PLAT_H */
diff --git a/include/sound/tpa6130a2-plat.h b/include/sound/tpa6130a2-plat.h
new file mode 100644
index 0000000..e8c901e
--- /dev/null
+++ b/include/sound/tpa6130a2-plat.h
@@ -0,0 +1,30 @@
+/*
+ * TPA6130A2 driver platform header
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * Written by Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef TPA6130A2_PLAT_H
+#define TPA6130A2_PLAT_H
+
+struct tpa6130a2_platform_data {
+	int power_gpio;
+};
+
+#endif
diff --git a/include/sound/wss.h b/include/sound/wss.h
index 6d65f32..fd01f22 100644
--- a/include/sound/wss.h
+++ b/include/sound/wss.h
@@ -154,7 +154,6 @@
 		      unsigned short hardware,
 		      unsigned short hwshare,
 		      struct snd_wss **rchip);
-int snd_wss_free(struct snd_wss *chip);
 int snd_wss_pcm(struct snd_wss *chip, int device, struct snd_pcm **rpcm);
 int snd_wss_timer(struct snd_wss *chip, int device, struct snd_timer **rtimer);
 int snd_wss_mixer(struct snd_wss *chip);
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
index 2a4b3bf..5acfb1e 100644
--- a/include/trace/define_trace.h
+++ b/include/trace/define_trace.h
@@ -31,6 +31,14 @@
 		assign, print, reg, unreg)			\
 	DEFINE_TRACE_FN(name, reg, unreg)
 
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args) \
+	DEFINE_TRACE(name)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_TRACE(name)
+
 #undef DECLARE_TRACE
 #define DECLARE_TRACE(name, proto, args)	\
 	DEFINE_TRACE(name)
@@ -63,6 +71,9 @@
 
 #undef TRACE_EVENT
 #undef TRACE_EVENT_FN
+#undef DECLARE_EVENT_CLASS
+#undef DEFINE_EVENT
+#undef DEFINE_EVENT_PRINT
 #undef TRACE_HEADER_MULTI_READ
 
 /* Only undef what we defined in this file */
diff --git a/include/trace/events/bkl.h b/include/trace/events/bkl.h
new file mode 100644
index 0000000..1af72dc
--- /dev/null
+++ b/include/trace/events/bkl.h
@@ -0,0 +1,61 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM bkl
+
+#if !defined(_TRACE_BKL_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_BKL_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(lock_kernel,
+
+	TP_PROTO(const char *func, const char *file, int line),
+
+	TP_ARGS(func, file, line),
+
+	TP_STRUCT__entry(
+		__field(	int,		depth			)
+		__field_ext(	const char *,	func, FILTER_PTR_STRING	)
+		__field_ext(	const char *,	file, FILTER_PTR_STRING	)
+		__field(	int,		line			)
+	),
+
+	TP_fast_assign(
+		/* We want to record the lock_depth after lock is acquired */
+		__entry->depth = current->lock_depth + 1;
+		__entry->func = func;
+		__entry->file = file;
+		__entry->line = line;
+	),
+
+	TP_printk("depth=%d file:line=%s:%d func=%s()", __entry->depth,
+		  __entry->file, __entry->line, __entry->func)
+);
+
+TRACE_EVENT(unlock_kernel,
+
+	TP_PROTO(const char *func, const char *file, int line),
+
+	TP_ARGS(func, file, line),
+
+	TP_STRUCT__entry(
+		__field(int,		depth		)
+		__field(const char *,	func		)
+		__field(const char *,	file		)
+		__field(int,		line		)
+	),
+
+	TP_fast_assign(
+		__entry->depth = current->lock_depth;
+		__entry->func = func;
+		__entry->file = file;
+		__entry->line = line;
+	),
+
+	TP_printk("depth=%d file:line=%s:%d func=%s()", __entry->depth,
+		  __entry->file, __entry->line, __entry->func)
+);
+
+#endif /* _TRACE_BKL_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index 00405b5..5fb7273 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -8,7 +8,7 @@
 #include <linux/blkdev.h>
 #include <linux/tracepoint.h>
 
-TRACE_EVENT(block_rq_abort,
+DECLARE_EVENT_CLASS(block_rq_with_error,
 
 	TP_PROTO(struct request_queue *q, struct request *rq),
 
@@ -40,7 +40,28 @@
 		  __entry->nr_sector, __entry->errors)
 );
 
-TRACE_EVENT(block_rq_insert,
+DEFINE_EVENT(block_rq_with_error, block_rq_abort,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+DEFINE_EVENT(block_rq_with_error, block_rq_requeue,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+DEFINE_EVENT(block_rq_with_error, block_rq_complete,
+
+	TP_PROTO(struct request_queue *q, struct request *rq),
+
+	TP_ARGS(q, rq)
+);
+
+DECLARE_EVENT_CLASS(block_rq,
 
 	TP_PROTO(struct request_queue *q, struct request *rq),
 
@@ -74,102 +95,18 @@
 		  __entry->nr_sector, __entry->comm)
 );
 
-TRACE_EVENT(block_rq_issue,
+DEFINE_EVENT(block_rq, block_rq_insert,
 
 	TP_PROTO(struct request_queue *q, struct request *rq),
 
-	TP_ARGS(q, rq),
-
-	TP_STRUCT__entry(
-		__field(  dev_t,	dev			)
-		__field(  sector_t,	sector			)
-		__field(  unsigned int,	nr_sector		)
-		__field(  unsigned int,	bytes			)
-		__array(  char,		rwbs,	6		)
-		__array(  char,		comm,   TASK_COMM_LEN   )
-		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
-	),
-
-	TP_fast_assign(
-		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
-		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
-		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
-		__entry->bytes     = blk_pc_request(rq) ? blk_rq_bytes(rq) : 0;
-
-		blk_fill_rwbs_rq(__entry->rwbs, rq);
-		blk_dump_cmd(__get_str(cmd), rq);
-		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
-	),
-
-	TP_printk("%d,%d %s %u (%s) %llu + %u [%s]",
-		  MAJOR(__entry->dev), MINOR(__entry->dev),
-		  __entry->rwbs, __entry->bytes, __get_str(cmd),
-		  (unsigned long long)__entry->sector,
-		  __entry->nr_sector, __entry->comm)
+	TP_ARGS(q, rq)
 );
 
-TRACE_EVENT(block_rq_requeue,
+DEFINE_EVENT(block_rq, block_rq_issue,
 
 	TP_PROTO(struct request_queue *q, struct request *rq),
 
-	TP_ARGS(q, rq),
-
-	TP_STRUCT__entry(
-		__field(  dev_t,	dev			)
-		__field(  sector_t,	sector			)
-		__field(  unsigned int,	nr_sector		)
-		__field(  int,		errors			)
-		__array(  char,		rwbs,	6		)
-		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
-	),
-
-	TP_fast_assign(
-		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
-		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
-		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
-		__entry->errors	   = rq->errors;
-
-		blk_fill_rwbs_rq(__entry->rwbs, rq);
-		blk_dump_cmd(__get_str(cmd), rq);
-	),
-
-	TP_printk("%d,%d %s (%s) %llu + %u [%d]",
-		  MAJOR(__entry->dev), MINOR(__entry->dev),
-		  __entry->rwbs, __get_str(cmd),
-		  (unsigned long long)__entry->sector,
-		  __entry->nr_sector, __entry->errors)
-);
-
-TRACE_EVENT(block_rq_complete,
-
-	TP_PROTO(struct request_queue *q, struct request *rq),
-
-	TP_ARGS(q, rq),
-
-	TP_STRUCT__entry(
-		__field(  dev_t,	dev			)
-		__field(  sector_t,	sector			)
-		__field(  unsigned int,	nr_sector		)
-		__field(  int,		errors			)
-		__array(  char,		rwbs,	6		)
-		__dynamic_array( char,	cmd,	blk_cmd_buf_len(rq)	)
-	),
-
-	TP_fast_assign(
-		__entry->dev	   = rq->rq_disk ? disk_devt(rq->rq_disk) : 0;
-		__entry->sector    = blk_pc_request(rq) ? 0 : blk_rq_pos(rq);
-		__entry->nr_sector = blk_pc_request(rq) ? 0 : blk_rq_sectors(rq);
-		__entry->errors    = rq->errors;
-
-		blk_fill_rwbs_rq(__entry->rwbs, rq);
-		blk_dump_cmd(__get_str(cmd), rq);
-	),
-
-	TP_printk("%d,%d %s (%s) %llu + %u [%d]",
-		  MAJOR(__entry->dev), MINOR(__entry->dev),
-		  __entry->rwbs, __get_str(cmd),
-		  (unsigned long long)__entry->sector,
-		  __entry->nr_sector, __entry->errors)
+	TP_ARGS(q, rq)
 );
 
 TRACE_EVENT(block_bio_bounce,
@@ -228,7 +165,7 @@
 		  __entry->nr_sector, __entry->error)
 );
 
-TRACE_EVENT(block_bio_backmerge,
+DECLARE_EVENT_CLASS(block_bio,
 
 	TP_PROTO(struct request_queue *q, struct bio *bio),
 
@@ -256,63 +193,28 @@
 		  __entry->nr_sector, __entry->comm)
 );
 
-TRACE_EVENT(block_bio_frontmerge,
+DEFINE_EVENT(block_bio, block_bio_backmerge,
 
 	TP_PROTO(struct request_queue *q, struct bio *bio),
 
-	TP_ARGS(q, bio),
-
-	TP_STRUCT__entry(
-		__field( dev_t,		dev			)
-		__field( sector_t,	sector			)
-		__field( unsigned,	nr_sector		)
-		__array( char,		rwbs,	6		)
-		__array( char,		comm,	TASK_COMM_LEN	)
-	),
-
-	TP_fast_assign(
-		__entry->dev		= bio->bi_bdev->bd_dev;
-		__entry->sector		= bio->bi_sector;
-		__entry->nr_sector	= bio->bi_size >> 9;
-		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
-		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
-	),
-
-	TP_printk("%d,%d %s %llu + %u [%s]",
-		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
-		  (unsigned long long)__entry->sector,
-		  __entry->nr_sector, __entry->comm)
+	TP_ARGS(q, bio)
 );
 
-TRACE_EVENT(block_bio_queue,
+DEFINE_EVENT(block_bio, block_bio_frontmerge,
 
 	TP_PROTO(struct request_queue *q, struct bio *bio),
 
-	TP_ARGS(q, bio),
-
-	TP_STRUCT__entry(
-		__field( dev_t,		dev			)
-		__field( sector_t,	sector			)
-		__field( unsigned int,	nr_sector		)
-		__array( char,		rwbs,	6		)
-		__array( char,		comm,	TASK_COMM_LEN	)
-	),
-
-	TP_fast_assign(
-		__entry->dev		= bio->bi_bdev->bd_dev;
-		__entry->sector		= bio->bi_sector;
-		__entry->nr_sector	= bio->bi_size >> 9;
-		blk_fill_rwbs(__entry->rwbs, bio->bi_rw, bio->bi_size);
-		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
-	),
-
-	TP_printk("%d,%d %s %llu + %u [%s]",
-		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
-		  (unsigned long long)__entry->sector,
-		  __entry->nr_sector, __entry->comm)
+	TP_ARGS(q, bio)
 );
 
-TRACE_EVENT(block_getrq,
+DEFINE_EVENT(block_bio, block_bio_queue,
+
+	TP_PROTO(struct request_queue *q, struct bio *bio),
+
+	TP_ARGS(q, bio)
+);
+
+DECLARE_EVENT_CLASS(block_get_rq,
 
 	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
 
@@ -341,33 +243,18 @@
 		  __entry->nr_sector, __entry->comm)
 );
 
-TRACE_EVENT(block_sleeprq,
+DEFINE_EVENT(block_get_rq, block_getrq,
 
 	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
 
-	TP_ARGS(q, bio, rw),
+	TP_ARGS(q, bio, rw)
+);
 
-	TP_STRUCT__entry(
-		__field( dev_t,		dev			)
-		__field( sector_t,	sector			)
-		__field( unsigned int,	nr_sector		)
-		__array( char,		rwbs,	6		)
-		__array( char,		comm,	TASK_COMM_LEN	)
-	),
+DEFINE_EVENT(block_get_rq, block_sleeprq,
 
-	TP_fast_assign(
-		__entry->dev		= bio ? bio->bi_bdev->bd_dev : 0;
-		__entry->sector		= bio ? bio->bi_sector : 0;
-		__entry->nr_sector	= bio ? bio->bi_size >> 9 : 0;
-		blk_fill_rwbs(__entry->rwbs,
-			    bio ? bio->bi_rw : 0, __entry->nr_sector);
-		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
-	),
+	TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
 
-	TP_printk("%d,%d %s %llu + %u [%s]",
-		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
-		  (unsigned long long)__entry->sector,
-		  __entry->nr_sector, __entry->comm)
+	TP_ARGS(q, bio, rw)
 );
 
 TRACE_EVENT(block_plug,
@@ -387,7 +274,7 @@
 	TP_printk("[%s]", __entry->comm)
 );
 
-TRACE_EVENT(block_unplug_timer,
+DECLARE_EVENT_CLASS(block_unplug,
 
 	TP_PROTO(struct request_queue *q),
 
@@ -406,23 +293,18 @@
 	TP_printk("[%s] %d", __entry->comm, __entry->nr_rq)
 );
 
-TRACE_EVENT(block_unplug_io,
+DEFINE_EVENT(block_unplug, block_unplug_timer,
 
 	TP_PROTO(struct request_queue *q),
 
-	TP_ARGS(q),
+	TP_ARGS(q)
+);
 
-	TP_STRUCT__entry(
-		__field( int,		nr_rq			)
-		__array( char,		comm,	TASK_COMM_LEN	)
-	),
+DEFINE_EVENT(block_unplug, block_unplug_io,
 
-	TP_fast_assign(
-		__entry->nr_rq	= q->rq.count[READ] + q->rq.count[WRITE];
-		memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
-	),
+	TP_PROTO(struct request_queue *q),
 
-	TP_printk("[%s] %d", __entry->comm, __entry->nr_rq)
+	TP_ARGS(q)
 );
 
 TRACE_EVENT(block_split,
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index d09550b..318f7653 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -90,7 +90,7 @@
 		  (unsigned long) __entry->dir, __entry->mode)
 );
 
-TRACE_EVENT(ext4_write_begin,
+DECLARE_EVENT_CLASS(ext4__write_begin,
 
 	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
 		 unsigned int flags),
@@ -118,7 +118,23 @@
 		  __entry->pos, __entry->len, __entry->flags)
 );
 
-TRACE_EVENT(ext4_ordered_write_end,
+DEFINE_EVENT(ext4__write_begin, ext4_write_begin,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags)
+);
+
+DEFINE_EVENT(ext4__write_begin, ext4_da_write_begin,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int flags),
+
+	TP_ARGS(inode, pos, len, flags)
+);
+
+DECLARE_EVENT_CLASS(ext4__write_end,
 	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
 			unsigned int copied),
 
@@ -145,57 +161,36 @@
 		  __entry->pos, __entry->len, __entry->copied)
 );
 
-TRACE_EVENT(ext4_writeback_write_end,
+DEFINE_EVENT(ext4__write_end, ext4_ordered_write_end,
+
 	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
 		 unsigned int copied),
 
-	TP_ARGS(inode, pos, len, copied),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
-		__field(	loff_t,	pos			)
-		__field(	unsigned int, len		)
-		__field(	unsigned int, copied		)
-	),
-
-	TP_fast_assign(
-		__entry->dev	= inode->i_sb->s_dev;
-		__entry->ino	= inode->i_ino;
-		__entry->pos	= pos;
-		__entry->len	= len;
-		__entry->copied	= copied;
-	),
-
-	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
-		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
-		  __entry->pos, __entry->len, __entry->copied)
+	TP_ARGS(inode, pos, len, copied)
 );
 
-TRACE_EVENT(ext4_journalled_write_end,
+DEFINE_EVENT(ext4__write_end, ext4_writeback_write_end,
+
 	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
 		 unsigned int copied),
-	TP_ARGS(inode, pos, len, copied),
 
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
-		__field(	loff_t,	pos			)
-		__field(	unsigned int, len		)
-		__field(	unsigned int, copied		)
-	),
+	TP_ARGS(inode, pos, len, copied)
+);
 
-	TP_fast_assign(
-		__entry->dev	= inode->i_sb->s_dev;
-		__entry->ino	= inode->i_ino;
-		__entry->pos	= pos;
-		__entry->len	= len;
-		__entry->copied	= copied;
-	),
+DEFINE_EVENT(ext4__write_end, ext4_journalled_write_end,
 
-	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
-		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
-		  __entry->pos, __entry->len, __entry->copied)
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
+);
+
+DEFINE_EVENT(ext4__write_end, ext4_da_write_end,
+
+	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
+		 unsigned int copied),
+
+	TP_ARGS(inode, pos, len, copied)
 );
 
 TRACE_EVENT(ext4_writepage,
@@ -337,60 +332,6 @@
 		  (unsigned long) __entry->writeback_index)
 );
 
-TRACE_EVENT(ext4_da_write_begin,
-	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
-			unsigned int flags),
-
-	TP_ARGS(inode, pos, len, flags),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
-		__field(	loff_t,	pos			)
-		__field(	unsigned int, len		)
-		__field(	unsigned int, flags		)
-	),
-
-	TP_fast_assign(
-		__entry->dev	= inode->i_sb->s_dev;
-		__entry->ino	= inode->i_ino;
-		__entry->pos	= pos;
-		__entry->len	= len;
-		__entry->flags	= flags;
-	),
-
-	TP_printk("dev %s ino %lu pos %llu len %u flags %u",
-		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
-		  __entry->pos, __entry->len, __entry->flags)
-);
-
-TRACE_EVENT(ext4_da_write_end,
-	TP_PROTO(struct inode *inode, loff_t pos, unsigned int len,
-			unsigned int copied),
-
-	TP_ARGS(inode, pos, len, copied),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	ino_t,	ino			)
-		__field(	loff_t,	pos			)
-		__field(	unsigned int, len		)
-		__field(	unsigned int, copied		)
-	),
-
-	TP_fast_assign(
-		__entry->dev	= inode->i_sb->s_dev;
-		__entry->ino	= inode->i_ino;
-		__entry->pos	= pos;
-		__entry->len	= len;
-		__entry->copied	= copied;
-	),
-
-	TP_printk("dev %s ino %lu pos %llu len %u copied %u",
-		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
-		  __entry->pos, __entry->len, __entry->copied)
-);
-
 TRACE_EVENT(ext4_discard_blocks,
 	TP_PROTO(struct super_block *sb, unsigned long long blk,
 			unsigned long long count),
diff --git a/include/trace/events/irq.h b/include/trace/events/irq.h
index b89f9db..0e4cfb6 100644
--- a/include/trace/events/irq.h
+++ b/include/trace/events/irq.h
@@ -48,7 +48,7 @@
 		__assign_str(name, action->name);
 	),
 
-	TP_printk("irq=%d handler=%s", __entry->irq, __get_str(name))
+	TP_printk("irq=%d name=%s", __entry->irq, __get_str(name))
 );
 
 /**
@@ -78,10 +78,28 @@
 		__entry->ret	= ret;
 	),
 
-	TP_printk("irq=%d return=%s",
+	TP_printk("irq=%d ret=%s",
 		  __entry->irq, __entry->ret ? "handled" : "unhandled")
 );
 
+DECLARE_EVENT_CLASS(softirq,
+
+	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+
+	TP_ARGS(h, vec),
+
+	TP_STRUCT__entry(
+		__field(	int,	vec			)
+	),
+
+	TP_fast_assign(
+		__entry->vec = (int)(h - vec);
+	),
+
+	TP_printk("vec=%d [action=%s]", __entry->vec,
+		  show_softirq_name(__entry->vec))
+);
+
 /**
  * softirq_entry - called immediately before the softirq handler
  * @h: pointer to struct softirq_action
@@ -93,22 +111,11 @@
  * number. Also, when used in combination with the softirq_exit tracepoint
  * we can determine the softirq latency.
  */
-TRACE_EVENT(softirq_entry,
+DEFINE_EVENT(softirq, softirq_entry,
 
 	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
 
-	TP_ARGS(h, vec),
-
-	TP_STRUCT__entry(
-		__field(	int,	vec			)
-	),
-
-	TP_fast_assign(
-		__entry->vec = (int)(h - vec);
-	),
-
-	TP_printk("softirq=%d action=%s", __entry->vec,
-		  show_softirq_name(__entry->vec))
+	TP_ARGS(h, vec)
 );
 
 /**
@@ -122,22 +129,11 @@
  * combination with the softirq_entry tracepoint we can determine the softirq
  * latency.
  */
-TRACE_EVENT(softirq_exit,
+DEFINE_EVENT(softirq, softirq_exit,
 
 	TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
 
-	TP_ARGS(h, vec),
-
-	TP_STRUCT__entry(
-		__field(	int,	vec			)
-	),
-
-	TP_fast_assign(
-		__entry->vec = (int)(h - vec);
-	),
-
-	TP_printk("softirq=%d action=%s", __entry->vec,
-		  show_softirq_name(__entry->vec))
+	TP_ARGS(h, vec)
 );
 
 #endif /*  _TRACE_IRQ_H */
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index 3c60b75..96b370a 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -30,7 +30,7 @@
 		  jbd2_dev_to_name(__entry->dev), __entry->result)
 );
 
-TRACE_EVENT(jbd2_start_commit,
+DECLARE_EVENT_CLASS(jbd2_commit,
 
 	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
 
@@ -53,73 +53,32 @@
 		  __entry->sync_commit)
 );
 
-TRACE_EVENT(jbd2_commit_locking,
+DEFINE_EVENT(jbd2_commit, jbd2_start_commit,
 
 	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
 
-	TP_ARGS(journal, commit_transaction),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	char,	sync_commit		  )
-		__field(	int,	transaction		  )
-	),
-
-	TP_fast_assign(
-		__entry->dev		= journal->j_fs_dev->bd_dev;
-		__entry->sync_commit = commit_transaction->t_synchronous_commit;
-		__entry->transaction	= commit_transaction->t_tid;
-	),
-
-	TP_printk("dev %s transaction %d sync %d",
-		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
-		  __entry->sync_commit)
+	TP_ARGS(journal, commit_transaction)
 );
 
-TRACE_EVENT(jbd2_commit_flushing,
+DEFINE_EVENT(jbd2_commit, jbd2_commit_locking,
 
 	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
 
-	TP_ARGS(journal, commit_transaction),
-
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	char,	sync_commit		  )
-		__field(	int,	transaction		  )
-	),
-
-	TP_fast_assign(
-		__entry->dev		= journal->j_fs_dev->bd_dev;
-		__entry->sync_commit = commit_transaction->t_synchronous_commit;
-		__entry->transaction	= commit_transaction->t_tid;
-	),
-
-	TP_printk("dev %s transaction %d sync %d",
-		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
-		  __entry->sync_commit)
+	TP_ARGS(journal, commit_transaction)
 );
 
-TRACE_EVENT(jbd2_commit_logging,
+DEFINE_EVENT(jbd2_commit, jbd2_commit_flushing,
 
 	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
 
-	TP_ARGS(journal, commit_transaction),
+	TP_ARGS(journal, commit_transaction)
+);
 
-	TP_STRUCT__entry(
-		__field(	dev_t,	dev			)
-		__field(	char,	sync_commit		  )
-		__field(	int,	transaction		  )
-	),
+DEFINE_EVENT(jbd2_commit, jbd2_commit_logging,
 
-	TP_fast_assign(
-		__entry->dev		= journal->j_fs_dev->bd_dev;
-		__entry->sync_commit = commit_transaction->t_synchronous_commit;
-		__entry->transaction	= commit_transaction->t_tid;
-	),
+	TP_PROTO(journal_t *journal, transaction_t *commit_transaction),
 
-	TP_printk("dev %s transaction %d sync %d",
-		  jbd2_dev_to_name(__entry->dev), __entry->transaction,
-		  __entry->sync_commit)
+	TP_ARGS(journal, commit_transaction)
 );
 
 TRACE_EVENT(jbd2_end_commit,
diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h
index eaf46bd..3adca0c 100644
--- a/include/trace/events/kmem.h
+++ b/include/trace/events/kmem.h
@@ -44,7 +44,7 @@
 	{(unsigned long)__GFP_MOVABLE,		"GFP_MOVABLE"}		\
 	) : "GFP_NOWAIT"
 
-TRACE_EVENT(kmalloc,
+DECLARE_EVENT_CLASS(kmem_alloc,
 
 	TP_PROTO(unsigned long call_site,
 		 const void *ptr,
@@ -78,41 +78,23 @@
 		show_gfp_flags(__entry->gfp_flags))
 );
 
-TRACE_EVENT(kmem_cache_alloc,
+DEFINE_EVENT(kmem_alloc, kmalloc,
 
-	TP_PROTO(unsigned long call_site,
-		 const void *ptr,
-		 size_t bytes_req,
-		 size_t bytes_alloc,
-		 gfp_t gfp_flags),
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc, gfp_t gfp_flags),
 
-	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags),
-
-	TP_STRUCT__entry(
-		__field(	unsigned long,	call_site	)
-		__field(	const void *,	ptr		)
-		__field(	size_t,		bytes_req	)
-		__field(	size_t,		bytes_alloc	)
-		__field(	gfp_t,		gfp_flags	)
-	),
-
-	TP_fast_assign(
-		__entry->call_site	= call_site;
-		__entry->ptr		= ptr;
-		__entry->bytes_req	= bytes_req;
-		__entry->bytes_alloc	= bytes_alloc;
-		__entry->gfp_flags	= gfp_flags;
-	),
-
-	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s",
-		__entry->call_site,
-		__entry->ptr,
-		__entry->bytes_req,
-		__entry->bytes_alloc,
-		show_gfp_flags(__entry->gfp_flags))
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags)
 );
 
-TRACE_EVENT(kmalloc_node,
+DEFINE_EVENT(kmem_alloc, kmem_cache_alloc,
+
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc, gfp_t gfp_flags),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags)
+);
+
+DECLARE_EVENT_CLASS(kmem_alloc_node,
 
 	TP_PROTO(unsigned long call_site,
 		 const void *ptr,
@@ -150,45 +132,25 @@
 		__entry->node)
 );
 
-TRACE_EVENT(kmem_cache_alloc_node,
+DEFINE_EVENT(kmem_alloc_node, kmalloc_node,
 
-	TP_PROTO(unsigned long call_site,
-		 const void *ptr,
-		 size_t bytes_req,
-		 size_t bytes_alloc,
-		 gfp_t gfp_flags,
-		 int node),
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc,
+		 gfp_t gfp_flags, int node),
 
-	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node),
-
-	TP_STRUCT__entry(
-		__field(	unsigned long,	call_site	)
-		__field(	const void *,	ptr		)
-		__field(	size_t,		bytes_req	)
-		__field(	size_t,		bytes_alloc	)
-		__field(	gfp_t,		gfp_flags	)
-		__field(	int,		node		)
-	),
-
-	TP_fast_assign(
-		__entry->call_site	= call_site;
-		__entry->ptr		= ptr;
-		__entry->bytes_req	= bytes_req;
-		__entry->bytes_alloc	= bytes_alloc;
-		__entry->gfp_flags	= gfp_flags;
-		__entry->node		= node;
-	),
-
-	TP_printk("call_site=%lx ptr=%p bytes_req=%zu bytes_alloc=%zu gfp_flags=%s node=%d",
-		__entry->call_site,
-		__entry->ptr,
-		__entry->bytes_req,
-		__entry->bytes_alloc,
-		show_gfp_flags(__entry->gfp_flags),
-		__entry->node)
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node)
 );
 
-TRACE_EVENT(kfree,
+DEFINE_EVENT(kmem_alloc_node, kmem_cache_alloc_node,
+
+	TP_PROTO(unsigned long call_site, const void *ptr,
+		 size_t bytes_req, size_t bytes_alloc,
+		 gfp_t gfp_flags, int node),
+
+	TP_ARGS(call_site, ptr, bytes_req, bytes_alloc, gfp_flags, node)
+);
+
+DECLARE_EVENT_CLASS(kmem_free,
 
 	TP_PROTO(unsigned long call_site, const void *ptr),
 
@@ -207,23 +169,18 @@
 	TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
 );
 
-TRACE_EVENT(kmem_cache_free,
+DEFINE_EVENT(kmem_free, kfree,
 
 	TP_PROTO(unsigned long call_site, const void *ptr),
 
-	TP_ARGS(call_site, ptr),
+	TP_ARGS(call_site, ptr)
+);
 
-	TP_STRUCT__entry(
-		__field(	unsigned long,	call_site	)
-		__field(	const void *,	ptr		)
-	),
+DEFINE_EVENT(kmem_free, kmem_cache_free,
 
-	TP_fast_assign(
-		__entry->call_site	= call_site;
-		__entry->ptr		= ptr;
-	),
+	TP_PROTO(unsigned long call_site, const void *ptr),
 
-	TP_printk("call_site=%lx ptr=%p", __entry->call_site, __entry->ptr)
+	TP_ARGS(call_site, ptr)
 );
 
 TRACE_EVENT(mm_page_free_direct,
@@ -299,7 +256,7 @@
 		show_gfp_flags(__entry->gfp_flags))
 );
 
-TRACE_EVENT(mm_page_alloc_zone_locked,
+DECLARE_EVENT_CLASS(mm_page,
 
 	TP_PROTO(struct page *page, unsigned int order, int migratetype),
 
@@ -325,29 +282,22 @@
 		__entry->order == 0)
 );
 
-TRACE_EVENT(mm_page_pcpu_drain,
+DEFINE_EVENT(mm_page, mm_page_alloc_zone_locked,
 
-	TP_PROTO(struct page *page, int order, int migratetype),
+	TP_PROTO(struct page *page, unsigned int order, int migratetype),
+
+	TP_ARGS(page, order, migratetype)
+);
+
+DEFINE_EVENT_PRINT(mm_page, mm_page_pcpu_drain,
+
+	TP_PROTO(struct page *page, unsigned int order, int migratetype),
 
 	TP_ARGS(page, order, migratetype),
 
-	TP_STRUCT__entry(
-		__field(	struct page *,	page		)
-		__field(	int,		order		)
-		__field(	int,		migratetype	)
-	),
-
-	TP_fast_assign(
-		__entry->page		= page;
-		__entry->order		= order;
-		__entry->migratetype	= migratetype;
-	),
-
 	TP_printk("page=%p pfn=%lu order=%d migratetype=%d",
-		__entry->page,
-		page_to_pfn(__entry->page),
-		__entry->order,
-		__entry->migratetype)
+		__entry->page, page_to_pfn(__entry->page),
+		__entry->order, __entry->migratetype)
 );
 
 TRACE_EVENT(mm_page_alloc_extfrag,
diff --git a/include/trace/events/lock.h b/include/trace/events/lock.h
new file mode 100644
index 0000000..a870ba1
--- /dev/null
+++ b/include/trace/events/lock.h
@@ -0,0 +1,96 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM lock
+
+#if !defined(_TRACE_LOCK_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_LOCK_H
+
+#include <linux/lockdep.h>
+#include <linux/tracepoint.h>
+
+#ifdef CONFIG_LOCKDEP
+
+TRACE_EVENT(lock_acquire,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
+		int trylock, int read, int check,
+		struct lockdep_map *next_lock, unsigned long ip),
+
+	TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, flags)
+		__string(name, lock->name)
+	),
+
+	TP_fast_assign(
+		__entry->flags = (trylock ? 1 : 0) | (read ? 2 : 0);
+		__assign_str(name, lock->name);
+	),
+
+	TP_printk("%s%s%s", (__entry->flags & 1) ? "try " : "",
+		  (__entry->flags & 2) ? "read " : "",
+		  __get_str(name))
+);
+
+TRACE_EVENT(lock_release,
+
+	TP_PROTO(struct lockdep_map *lock, int nested, unsigned long ip),
+
+	TP_ARGS(lock, nested, ip),
+
+	TP_STRUCT__entry(
+		__string(name, lock->name)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+	),
+
+	TP_printk("%s", __get_str(name))
+);
+
+#ifdef CONFIG_LOCK_STAT
+
+TRACE_EVENT(lock_contended,
+
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
+
+	TP_ARGS(lock, ip),
+
+	TP_STRUCT__entry(
+		__string(name, lock->name)
+	),
+
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+	),
+
+	TP_printk("%s", __get_str(name))
+);
+
+TRACE_EVENT(lock_acquired,
+	TP_PROTO(struct lockdep_map *lock, unsigned long ip, s64 waittime),
+
+	TP_ARGS(lock, ip, waittime),
+
+	TP_STRUCT__entry(
+		__string(name, lock->name)
+		__field(unsigned long, wait_usec)
+		__field(unsigned long, wait_nsec_rem)
+	),
+	TP_fast_assign(
+		__assign_str(name, lock->name);
+		__entry->wait_nsec_rem = do_div(waittime, NSEC_PER_USEC);
+		__entry->wait_usec = (unsigned long) waittime;
+	),
+	TP_printk("%s (%lu.%03lu us)", __get_str(name), __entry->wait_usec,
+				       __entry->wait_nsec_rem)
+);
+
+#endif
+#endif
+
+#endif /* _TRACE_LOCK_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/lockdep.h b/include/trace/events/lockdep.h
deleted file mode 100644
index bcf1d20..0000000
--- a/include/trace/events/lockdep.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#undef TRACE_SYSTEM
-#define TRACE_SYSTEM lockdep
-
-#if !defined(_TRACE_LOCKDEP_H) || defined(TRACE_HEADER_MULTI_READ)
-#define _TRACE_LOCKDEP_H
-
-#include <linux/lockdep.h>
-#include <linux/tracepoint.h>
-
-#ifdef CONFIG_LOCKDEP
-
-TRACE_EVENT(lock_acquire,
-
-	TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
-		int trylock, int read, int check,
-		struct lockdep_map *next_lock, unsigned long ip),
-
-	TP_ARGS(lock, subclass, trylock, read, check, next_lock, ip),
-
-	TP_STRUCT__entry(
-		__field(unsigned int, flags)
-		__string(name, lock->name)
-	),
-
-	TP_fast_assign(
-		__entry->flags = (trylock ? 1 : 0) | (read ? 2 : 0);
-		__assign_str(name, lock->name);
-	),
-
-	TP_printk("%s%s%s", (__entry->flags & 1) ? "try " : "",
-		  (__entry->flags & 2) ? "read " : "",
-		  __get_str(name))
-);
-
-TRACE_EVENT(lock_release,
-
-	TP_PROTO(struct lockdep_map *lock, int nested, unsigned long ip),
-
-	TP_ARGS(lock, nested, ip),
-
-	TP_STRUCT__entry(
-		__string(name, lock->name)
-	),
-
-	TP_fast_assign(
-		__assign_str(name, lock->name);
-	),
-
-	TP_printk("%s", __get_str(name))
-);
-
-#ifdef CONFIG_LOCK_STAT
-
-TRACE_EVENT(lock_contended,
-
-	TP_PROTO(struct lockdep_map *lock, unsigned long ip),
-
-	TP_ARGS(lock, ip),
-
-	TP_STRUCT__entry(
-		__string(name, lock->name)
-	),
-
-	TP_fast_assign(
-		__assign_str(name, lock->name);
-	),
-
-	TP_printk("%s", __get_str(name))
-);
-
-TRACE_EVENT(lock_acquired,
-	TP_PROTO(struct lockdep_map *lock, unsigned long ip, s64 waittime),
-
-	TP_ARGS(lock, ip, waittime),
-
-	TP_STRUCT__entry(
-		__string(name, lock->name)
-		__field(unsigned long, wait_usec)
-		__field(unsigned long, wait_nsec_rem)
-	),
-	TP_fast_assign(
-		__assign_str(name, lock->name);
-		__entry->wait_nsec_rem = do_div(waittime, NSEC_PER_USEC);
-		__entry->wait_usec = (unsigned long) waittime;
-	),
-	TP_printk("%s (%lu.%03lu us)", __get_str(name), __entry->wait_usec,
-				       __entry->wait_nsec_rem)
-);
-
-#endif
-#endif
-
-#endif /* _TRACE_LOCKDEP_H */
-
-/* This part must be outside protection */
-#include <trace/define_trace.h>
diff --git a/include/trace/events/mce.h b/include/trace/events/mce.h
new file mode 100644
index 0000000..7eee778
--- /dev/null
+++ b/include/trace/events/mce.h
@@ -0,0 +1,69 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM mce
+
+#if !defined(_TRACE_MCE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_MCE_H
+
+#include <linux/ktime.h>
+#include <linux/tracepoint.h>
+#include <asm/mce.h>
+
+TRACE_EVENT(mce_record,
+
+	TP_PROTO(struct mce *m),
+
+	TP_ARGS(m),
+
+	TP_STRUCT__entry(
+		__field(	u64,		mcgcap		)
+		__field(	u64,		mcgstatus	)
+		__field(	u8,		bank		)
+		__field(	u64,		status		)
+		__field(	u64,		addr		)
+		__field(	u64,		misc		)
+		__field(	u64,		ip		)
+		__field(	u8,		cs		)
+		__field(	u64,		tsc		)
+		__field(	u64,		walltime	)
+		__field(	u32,		cpu		)
+		__field(	u32,		cpuid		)
+		__field(	u32,		apicid		)
+		__field(	u32,		socketid	)
+		__field(	u8,		cpuvendor	)
+	),
+
+	TP_fast_assign(
+		__entry->mcgcap		= m->mcgcap;
+		__entry->mcgstatus	= m->mcgstatus;
+		__entry->bank		= m->bank;
+		__entry->status		= m->status;
+		__entry->addr		= m->addr;
+		__entry->misc		= m->misc;
+		__entry->ip		= m->ip;
+		__entry->cs		= m->cs;
+		__entry->tsc		= m->tsc;
+		__entry->walltime	= m->time;
+		__entry->cpu		= m->extcpu;
+		__entry->cpuid		= m->cpuid;
+		__entry->apicid		= m->apicid;
+		__entry->socketid	= m->socketid;
+		__entry->cpuvendor	= m->cpuvendor;
+	),
+
+	TP_printk("CPU: %d, MCGc/s: %llx/%llx, MC%d: %016Lx, ADDR/MISC: %016Lx/%016Lx, RIP: %02x:<%016Lx>, TSC: %llx, PROCESSOR: %u:%x, TIME: %llu, SOCKET: %u, APIC: %x",
+		__entry->cpu,
+		__entry->mcgcap, __entry->mcgstatus,
+		__entry->bank, __entry->status,
+		__entry->addr, __entry->misc,
+		__entry->cs, __entry->ip,
+		__entry->tsc,
+		__entry->cpuvendor, __entry->cpuid,
+		__entry->walltime,
+		__entry->socketid,
+		__entry->apicid)
+);
+
+#endif /* _TRACE_MCE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/module.h b/include/trace/events/module.h
index 84160fb..4b0f48b 100644
--- a/include/trace/events/module.h
+++ b/include/trace/events/module.h
@@ -51,7 +51,7 @@
 	TP_printk("%s", __get_str(name))
 );
 
-TRACE_EVENT(module_get,
+DECLARE_EVENT_CLASS(module_refcnt,
 
 	TP_PROTO(struct module *mod, unsigned long ip, int refcnt),
 
@@ -73,26 +73,18 @@
 		  __get_str(name), (void *)__entry->ip, __entry->refcnt)
 );
 
-TRACE_EVENT(module_put,
+DEFINE_EVENT(module_refcnt, module_get,
 
 	TP_PROTO(struct module *mod, unsigned long ip, int refcnt),
 
-	TP_ARGS(mod, ip, refcnt),
+	TP_ARGS(mod, ip, refcnt)
+);
 
-	TP_STRUCT__entry(
-		__field(	unsigned long,	ip		)
-		__field(	int,		refcnt		)
-		__string(	name,		mod->name	)
-	),
+DEFINE_EVENT(module_refcnt, module_put,
 
-	TP_fast_assign(
-		__entry->ip	= ip;
-		__entry->refcnt	= refcnt;
-		__assign_str(name, mod->name);
-	),
+	TP_PROTO(struct module *mod, unsigned long ip, int refcnt),
 
-	TP_printk("%s call_site=%pf refcnt=%d",
-		  __get_str(name), (void *)__entry->ip, __entry->refcnt)
+	TP_ARGS(mod, ip, refcnt)
 );
 
 TRACE_EVENT(module_request,
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index ea6d579..c4efe9b 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -16,9 +16,7 @@
 };
 #endif
 
-
-
-TRACE_EVENT(power_start,
+DECLARE_EVENT_CLASS(power,
 
 	TP_PROTO(unsigned int type, unsigned int state),
 
@@ -37,6 +35,20 @@
 	TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long)__entry->state)
 );
 
+DEFINE_EVENT(power, power_start,
+
+	TP_PROTO(unsigned int type, unsigned int state),
+
+	TP_ARGS(type, state)
+);
+
+DEFINE_EVENT(power, power_frequency,
+
+	TP_PROTO(unsigned int type, unsigned int state),
+
+	TP_ARGS(type, state)
+);
+
 TRACE_EVENT(power_end,
 
 	TP_PROTO(int dummy),
@@ -55,26 +67,6 @@
 
 );
 
-
-TRACE_EVENT(power_frequency,
-
-	TP_PROTO(unsigned int type, unsigned int state),
-
-	TP_ARGS(type, state),
-
-	TP_STRUCT__entry(
-		__field(	u64,		type		)
-		__field(	u64,		state		)
-	),
-
-	TP_fast_assign(
-		__entry->type = type;
-		__entry->state = state;
-	),
-
-	TP_printk("type=%lu state=%lu", (unsigned long)__entry->type, (unsigned long) __entry->state)
-);
-
 #endif /* _TRACE_POWER_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 4069c43..cfceb0b 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -26,7 +26,7 @@
 		__entry->pid	= t->pid;
 	),
 
-	TP_printk("task %s:%d", __entry->comm, __entry->pid)
+	TP_printk("comm=%s pid=%d", __entry->comm, __entry->pid)
 );
 
 /*
@@ -46,7 +46,7 @@
 		__entry->ret	= ret;
 	),
 
-	TP_printk("ret %d", __entry->ret)
+	TP_printk("ret=%d", __entry->ret)
 );
 
 /*
@@ -73,7 +73,7 @@
 		__entry->prio	= p->prio;
 	),
 
-	TP_printk("task %s:%d [%d]",
+	TP_printk("comm=%s pid=%d prio=%d",
 		  __entry->comm, __entry->pid, __entry->prio)
 );
 
@@ -83,7 +83,7 @@
  * (NOTE: the 'rq' argument is not used by generic trace events,
  *        but used by the latency tracer plugin. )
  */
-TRACE_EVENT(sched_wakeup,
+DECLARE_EVENT_CLASS(sched_wakeup_template,
 
 	TP_PROTO(struct rq *rq, struct task_struct *p, int success),
 
@@ -94,7 +94,7 @@
 		__field(	pid_t,	pid			)
 		__field(	int,	prio			)
 		__field(	int,	success			)
-		__field(	int,	cpu			)
+		__field(	int,	target_cpu		)
 	),
 
 	TP_fast_assign(
@@ -102,46 +102,27 @@
 		__entry->pid		= p->pid;
 		__entry->prio		= p->prio;
 		__entry->success	= success;
-		__entry->cpu		= task_cpu(p);
+		__entry->target_cpu	= task_cpu(p);
 	),
 
-	TP_printk("task %s:%d [%d] success=%d [%03d]",
+	TP_printk("comm=%s pid=%d prio=%d success=%d target_cpu=%03d",
 		  __entry->comm, __entry->pid, __entry->prio,
-		  __entry->success, __entry->cpu)
+		  __entry->success, __entry->target_cpu)
 );
 
+DEFINE_EVENT(sched_wakeup_template, sched_wakeup,
+	     TP_PROTO(struct rq *rq, struct task_struct *p, int success),
+	     TP_ARGS(rq, p, success));
+
 /*
  * Tracepoint for waking up a new task:
  *
  * (NOTE: the 'rq' argument is not used by generic trace events,
  *        but used by the latency tracer plugin. )
  */
-TRACE_EVENT(sched_wakeup_new,
-
-	TP_PROTO(struct rq *rq, struct task_struct *p, int success),
-
-	TP_ARGS(rq, p, success),
-
-	TP_STRUCT__entry(
-		__array(	char,	comm,	TASK_COMM_LEN	)
-		__field(	pid_t,	pid			)
-		__field(	int,	prio			)
-		__field(	int,	success			)
-		__field(	int,	cpu			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
-		__entry->pid		= p->pid;
-		__entry->prio		= p->prio;
-		__entry->success	= success;
-		__entry->cpu		= task_cpu(p);
-	),
-
-	TP_printk("task %s:%d [%d] success=%d [%03d]",
-		  __entry->comm, __entry->pid, __entry->prio,
-		  __entry->success, __entry->cpu)
-);
+DEFINE_EVENT(sched_wakeup_template, sched_wakeup_new,
+	     TP_PROTO(struct rq *rq, struct task_struct *p, int success),
+	     TP_ARGS(rq, p, success));
 
 /*
  * Tracepoint for task switches, performed by the scheduler:
@@ -176,7 +157,7 @@
 		__entry->next_prio	= next->prio;
 	),
 
-	TP_printk("task %s:%d [%d] (%s) ==> %s:%d [%d]",
+	TP_printk("prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s ==> next_comm=%s next_pid=%d next_prio=%d",
 		__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
 		__entry->prev_state ?
 		  __print_flags(__entry->prev_state, "|",
@@ -211,60 +192,47 @@
 		__entry->dest_cpu	= dest_cpu;
 	),
 
-	TP_printk("task %s:%d [%d] from: %d  to: %d",
+	TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d",
 		  __entry->comm, __entry->pid, __entry->prio,
 		  __entry->orig_cpu, __entry->dest_cpu)
 );
 
+DECLARE_EVENT_CLASS(sched_process_template,
+
+	TP_PROTO(struct task_struct *p),
+
+	TP_ARGS(p),
+
+	TP_STRUCT__entry(
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+		__field(	int,	prio			)
+	),
+
+	TP_fast_assign(
+		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
+		__entry->pid		= p->pid;
+		__entry->prio		= p->prio;
+	),
+
+	TP_printk("comm=%s pid=%d prio=%d",
+		  __entry->comm, __entry->pid, __entry->prio)
+);
+
 /*
  * Tracepoint for freeing a task:
  */
-TRACE_EVENT(sched_process_free,
-
-	TP_PROTO(struct task_struct *p),
-
-	TP_ARGS(p),
-
-	TP_STRUCT__entry(
-		__array(	char,	comm,	TASK_COMM_LEN	)
-		__field(	pid_t,	pid			)
-		__field(	int,	prio			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
-		__entry->pid		= p->pid;
-		__entry->prio		= p->prio;
-	),
-
-	TP_printk("task %s:%d [%d]",
-		  __entry->comm, __entry->pid, __entry->prio)
-);
+DEFINE_EVENT(sched_process_template, sched_process_free,
+	     TP_PROTO(struct task_struct *p),
+	     TP_ARGS(p));
+	     
 
 /*
  * Tracepoint for a task exiting:
  */
-TRACE_EVENT(sched_process_exit,
-
-	TP_PROTO(struct task_struct *p),
-
-	TP_ARGS(p),
-
-	TP_STRUCT__entry(
-		__array(	char,	comm,	TASK_COMM_LEN	)
-		__field(	pid_t,	pid			)
-		__field(	int,	prio			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
-		__entry->pid		= p->pid;
-		__entry->prio		= p->prio;
-	),
-
-	TP_printk("task %s:%d [%d]",
-		  __entry->comm, __entry->pid, __entry->prio)
-);
+DEFINE_EVENT(sched_process_template, sched_process_exit,
+	     TP_PROTO(struct task_struct *p),
+	     TP_ARGS(p));
 
 /*
  * Tracepoint for a waiting task:
@@ -287,7 +255,7 @@
 		__entry->prio		= current->prio;
 	),
 
-	TP_printk("task %s:%d [%d]",
+	TP_printk("comm=%s pid=%d prio=%d",
 		  __entry->comm, __entry->pid, __entry->prio)
 );
 
@@ -314,46 +282,16 @@
 		__entry->child_pid	= child->pid;
 	),
 
-	TP_printk("parent %s:%d  child %s:%d",
+	TP_printk("comm=%s pid=%d child_comm=%s child_pid=%d",
 		__entry->parent_comm, __entry->parent_pid,
 		__entry->child_comm, __entry->child_pid)
 );
 
 /*
- * Tracepoint for sending a signal:
- */
-TRACE_EVENT(sched_signal_send,
-
-	TP_PROTO(int sig, struct task_struct *p),
-
-	TP_ARGS(sig, p),
-
-	TP_STRUCT__entry(
-		__field(	int,	sig			)
-		__array(	char,	comm,	TASK_COMM_LEN	)
-		__field(	pid_t,	pid			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
-		__entry->pid	= p->pid;
-		__entry->sig	= sig;
-	),
-
-	TP_printk("sig: %d  task %s:%d",
-		  __entry->sig, __entry->comm, __entry->pid)
-);
-
-/*
  * XXX the below sched_stat tracepoints only apply to SCHED_OTHER/BATCH/IDLE
  *     adding sched_stat support to SCHED_FIFO/RR would be welcome.
  */
-
-/*
- * Tracepoint for accounting wait time (time the task is runnable
- * but not actually running due to scheduler contention).
- */
-TRACE_EVENT(sched_stat_wait,
+DECLARE_EVENT_CLASS(sched_stat_template,
 
 	TP_PROTO(struct task_struct *tsk, u64 delay),
 
@@ -374,11 +312,36 @@
 		__perf_count(delay);
 	),
 
-	TP_printk("task: %s:%d wait: %Lu [ns]",
+	TP_printk("comm=%s pid=%d delay=%Lu [ns]",
 			__entry->comm, __entry->pid,
 			(unsigned long long)__entry->delay)
 );
 
+
+/*
+ * Tracepoint for accounting wait time (time the task is runnable
+ * but not actually running due to scheduler contention).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_wait,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
+/*
+ * Tracepoint for accounting sleep time (time the task is not runnable,
+ * including iowait, see below).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_sleep,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
+/*
+ * Tracepoint for accounting iowait time (time the task is not runnable
+ * due to waiting on IO to complete).
+ */
+DEFINE_EVENT(sched_stat_template, sched_stat_iowait,
+	     TP_PROTO(struct task_struct *tsk, u64 delay),
+	     TP_ARGS(tsk, delay));
+
 /*
  * Tracepoint for accounting runtime (time the task is executing
  * on a CPU).
@@ -406,72 +369,12 @@
 		__perf_count(runtime);
 	),
 
-	TP_printk("task: %s:%d runtime: %Lu [ns], vruntime: %Lu [ns]",
+	TP_printk("comm=%s pid=%d runtime=%Lu [ns] vruntime=%Lu [ns]",
 			__entry->comm, __entry->pid,
 			(unsigned long long)__entry->runtime,
 			(unsigned long long)__entry->vruntime)
 );
 
-/*
- * Tracepoint for accounting sleep time (time the task is not runnable,
- * including iowait, see below).
- */
-TRACE_EVENT(sched_stat_sleep,
-
-	TP_PROTO(struct task_struct *tsk, u64 delay),
-
-	TP_ARGS(tsk, delay),
-
-	TP_STRUCT__entry(
-		__array( char,	comm,	TASK_COMM_LEN	)
-		__field( pid_t,	pid			)
-		__field( u64,	delay			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
-		__entry->pid	= tsk->pid;
-		__entry->delay	= delay;
-	)
-	TP_perf_assign(
-		__perf_count(delay);
-	),
-
-	TP_printk("task: %s:%d sleep: %Lu [ns]",
-			__entry->comm, __entry->pid,
-			(unsigned long long)__entry->delay)
-);
-
-/*
- * Tracepoint for accounting iowait time (time the task is not runnable
- * due to waiting on IO to complete).
- */
-TRACE_EVENT(sched_stat_iowait,
-
-	TP_PROTO(struct task_struct *tsk, u64 delay),
-
-	TP_ARGS(tsk, delay),
-
-	TP_STRUCT__entry(
-		__array( char,	comm,	TASK_COMM_LEN	)
-		__field( pid_t,	pid			)
-		__field( u64,	delay			)
-	),
-
-	TP_fast_assign(
-		memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
-		__entry->pid	= tsk->pid;
-		__entry->delay	= delay;
-	)
-	TP_perf_assign(
-		__perf_count(delay);
-	),
-
-	TP_printk("task: %s:%d iowait: %Lu [ns]",
-			__entry->comm, __entry->pid,
-			(unsigned long long)__entry->delay)
-);
-
 #endif /* _TRACE_SCHED_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/signal.h b/include/trace/events/signal.h
new file mode 100644
index 0000000..a510b75
--- /dev/null
+++ b/include/trace/events/signal.h
@@ -0,0 +1,173 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM signal
+
+#if !defined(_TRACE_SIGNAL_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SIGNAL_H
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/tracepoint.h>
+
+#define TP_STORE_SIGINFO(__entry, info)				\
+	do {							\
+		if (info == SEND_SIG_NOINFO) {			\
+			__entry->errno	= 0;			\
+			__entry->code	= SI_USER;		\
+		} else if (info == SEND_SIG_PRIV) {		\
+			__entry->errno	= 0;			\
+			__entry->code	= SI_KERNEL;		\
+		} else {					\
+			__entry->errno	= info->si_errno;	\
+			__entry->code	= info->si_code;	\
+		}						\
+	} while (0)
+
+/**
+ * signal_generate - called when a signal is generated
+ * @sig: signal number
+ * @info: pointer to struct siginfo
+ * @task: pointer to struct task_struct
+ *
+ * Current process sends a 'sig' signal to 'task' process with
+ * 'info' siginfo. If 'info' is SEND_SIG_NOINFO or SEND_SIG_PRIV,
+ * 'info' is not a pointer and you can't access its field. Instead,
+ * SEND_SIG_NOINFO means that si_code is SI_USER, and SEND_SIG_PRIV
+ * means that si_code is SI_KERNEL.
+ */
+TRACE_EVENT(signal_generate,
+
+	TP_PROTO(int sig, struct siginfo *info, struct task_struct *task),
+
+	TP_ARGS(sig, info, task),
+
+	TP_STRUCT__entry(
+		__field(	int,	sig			)
+		__field(	int,	errno			)
+		__field(	int,	code			)
+		__array(	char,	comm,	TASK_COMM_LEN	)
+		__field(	pid_t,	pid			)
+	),
+
+	TP_fast_assign(
+		__entry->sig	= sig;
+		TP_STORE_SIGINFO(__entry, info);
+		memcpy(__entry->comm, task->comm, TASK_COMM_LEN);
+		__entry->pid	= task->pid;
+	),
+
+	TP_printk("sig=%d errno=%d code=%d comm=%s pid=%d",
+		  __entry->sig, __entry->errno, __entry->code,
+		  __entry->comm, __entry->pid)
+);
+
+/**
+ * signal_deliver - called when a signal is delivered
+ * @sig: signal number
+ * @info: pointer to struct siginfo
+ * @ka: pointer to struct k_sigaction
+ *
+ * A 'sig' signal is delivered to current process with 'info' siginfo,
+ * and it will be handled by 'ka'. ka->sa.sa_handler can be SIG_IGN or
+ * SIG_DFL.
+ * Note that some signals reported by signal_generate tracepoint can be
+ * lost, ignored or modified (by debugger) before hitting this tracepoint.
+ * This means, this can show which signals are actually delivered, but
+ * matching generated signals and delivered signals may not be correct.
+ */
+TRACE_EVENT(signal_deliver,
+
+	TP_PROTO(int sig, struct siginfo *info, struct k_sigaction *ka),
+
+	TP_ARGS(sig, info, ka),
+
+	TP_STRUCT__entry(
+		__field(	int,		sig		)
+		__field(	int,		errno		)
+		__field(	int,		code		)
+		__field(	unsigned long,	sa_handler	)
+		__field(	unsigned long,	sa_flags	)
+	),
+
+	TP_fast_assign(
+		__entry->sig	= sig;
+		TP_STORE_SIGINFO(__entry, info);
+		__entry->sa_handler	= (unsigned long)ka->sa.sa_handler;
+		__entry->sa_flags	= ka->sa.sa_flags;
+	),
+
+	TP_printk("sig=%d errno=%d code=%d sa_handler=%lx sa_flags=%lx",
+		  __entry->sig, __entry->errno, __entry->code,
+		  __entry->sa_handler, __entry->sa_flags)
+);
+
+/**
+ * signal_overflow_fail - called when signal queue is overflow
+ * @sig: signal number
+ * @group: signal to process group or not (bool)
+ * @info: pointer to struct siginfo
+ *
+ * Kernel fails to generate 'sig' signal with 'info' siginfo, because
+ * siginfo queue is overflow, and the signal is dropped.
+ * 'group' is not 0 if the signal will be sent to a process group.
+ * 'sig' is always one of RT signals.
+ */
+TRACE_EVENT(signal_overflow_fail,
+
+	TP_PROTO(int sig, int group, struct siginfo *info),
+
+	TP_ARGS(sig, group, info),
+
+	TP_STRUCT__entry(
+		__field(	int,	sig	)
+		__field(	int,	group	)
+		__field(	int,	errno	)
+		__field(	int,	code	)
+	),
+
+	TP_fast_assign(
+		__entry->sig	= sig;
+		__entry->group	= group;
+		TP_STORE_SIGINFO(__entry, info);
+	),
+
+	TP_printk("sig=%d group=%d errno=%d code=%d",
+		  __entry->sig, __entry->group, __entry->errno, __entry->code)
+);
+
+/**
+ * signal_lose_info - called when siginfo is lost
+ * @sig: signal number
+ * @group: signal to process group or not (bool)
+ * @info: pointer to struct siginfo
+ *
+ * Kernel generates 'sig' signal but loses 'info' siginfo, because siginfo
+ * queue is overflow.
+ * 'group' is not 0 if the signal will be sent to a process group.
+ * 'sig' is always one of non-RT signals.
+ */
+TRACE_EVENT(signal_lose_info,
+
+	TP_PROTO(int sig, int group, struct siginfo *info),
+
+	TP_ARGS(sig, group, info),
+
+	TP_STRUCT__entry(
+		__field(	int,	sig	)
+		__field(	int,	group	)
+		__field(	int,	errno	)
+		__field(	int,	code	)
+	),
+
+	TP_fast_assign(
+		__entry->sig	= sig;
+		__entry->group	= group;
+		TP_STORE_SIGINFO(__entry, info);
+	),
+
+	TP_printk("sig=%d group=%d errno=%d code=%d",
+		  __entry->sig, __entry->group, __entry->errno, __entry->code)
+);
+#endif /* _TRACE_SIGNAL_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/syscalls.h b/include/trace/events/syscalls.h
index 397dff2..fb726ac 100644
--- a/include/trace/events/syscalls.h
+++ b/include/trace/events/syscalls.h
@@ -1,5 +1,6 @@
 #undef TRACE_SYSTEM
-#define TRACE_SYSTEM syscalls
+#define TRACE_SYSTEM raw_syscalls
+#define TRACE_INCLUDE_FILE syscalls
 
 #if !defined(_TRACE_EVENTS_SYSCALLS_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_EVENTS_SYSCALLS_H
diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h
index 1844c48..e5ce87a 100644
--- a/include/trace/events/timer.h
+++ b/include/trace/events/timer.h
@@ -26,7 +26,7 @@
 		__entry->timer	= timer;
 	),
 
-	TP_printk("timer %p", __entry->timer)
+	TP_printk("timer=%p", __entry->timer)
 );
 
 /**
@@ -54,7 +54,7 @@
 		__entry->now		= jiffies;
 	),
 
-	TP_printk("timer %p: func %pf, expires %lu, timeout %ld",
+	TP_printk("timer=%p function=%pf expires=%lu [timeout=%ld]",
 		  __entry->timer, __entry->function, __entry->expires,
 		  (long)__entry->expires - __entry->now)
 );
@@ -81,7 +81,7 @@
 		__entry->now		= jiffies;
 	),
 
-	TP_printk("timer %p: now %lu", __entry->timer, __entry->now)
+	TP_printk("timer=%p now=%lu", __entry->timer, __entry->now)
 );
 
 /**
@@ -108,7 +108,7 @@
 		__entry->timer	= timer;
 	),
 
-	TP_printk("timer %p", __entry->timer)
+	TP_printk("timer=%p", __entry->timer)
 );
 
 /**
@@ -129,7 +129,7 @@
 		__entry->timer	= timer;
 	),
 
-	TP_printk("timer %p", __entry->timer)
+	TP_printk("timer=%p", __entry->timer)
 );
 
 /**
@@ -140,24 +140,24 @@
  */
 TRACE_EVENT(hrtimer_init,
 
-	TP_PROTO(struct hrtimer *timer, clockid_t clockid,
+	TP_PROTO(struct hrtimer *hrtimer, clockid_t clockid,
 		 enum hrtimer_mode mode),
 
-	TP_ARGS(timer, clockid, mode),
+	TP_ARGS(hrtimer, clockid, mode),
 
 	TP_STRUCT__entry(
-		__field( void *,		timer		)
+		__field( void *,		hrtimer		)
 		__field( clockid_t,		clockid		)
 		__field( enum hrtimer_mode,	mode		)
 	),
 
 	TP_fast_assign(
-		__entry->timer		= timer;
+		__entry->hrtimer	= hrtimer;
 		__entry->clockid	= clockid;
 		__entry->mode		= mode;
 	),
 
-	TP_printk("hrtimer %p, clockid %s, mode %s", __entry->timer,
+	TP_printk("hrtimer=%p clockid=%s mode=%s", __entry->hrtimer,
 		  __entry->clockid == CLOCK_REALTIME ?
 			"CLOCK_REALTIME" : "CLOCK_MONOTONIC",
 		  __entry->mode == HRTIMER_MODE_ABS ?
@@ -170,26 +170,26 @@
  */
 TRACE_EVENT(hrtimer_start,
 
-	TP_PROTO(struct hrtimer *timer),
+	TP_PROTO(struct hrtimer *hrtimer),
 
-	TP_ARGS(timer),
+	TP_ARGS(hrtimer),
 
 	TP_STRUCT__entry(
-		__field( void *,	timer		)
+		__field( void *,	hrtimer		)
 		__field( void *,	function	)
 		__field( s64,		expires		)
 		__field( s64,		softexpires	)
 	),
 
 	TP_fast_assign(
-		__entry->timer		= timer;
-		__entry->function	= timer->function;
-		__entry->expires	= hrtimer_get_expires(timer).tv64;
-		__entry->softexpires	= hrtimer_get_softexpires(timer).tv64;
+		__entry->hrtimer	= hrtimer;
+		__entry->function	= hrtimer->function;
+		__entry->expires	= hrtimer_get_expires(hrtimer).tv64;
+		__entry->softexpires	= hrtimer_get_softexpires(hrtimer).tv64;
 	),
 
-	TP_printk("hrtimer %p, func %pf, expires %llu, softexpires %llu",
-		  __entry->timer, __entry->function,
+	TP_printk("hrtimer=%p function=%pf expires=%llu softexpires=%llu",
+		  __entry->hrtimer, __entry->function,
 		  (unsigned long long)ktime_to_ns((ktime_t) {
 				  .tv64 = __entry->expires }),
 		  (unsigned long long)ktime_to_ns((ktime_t) {
@@ -206,23 +206,22 @@
  */
 TRACE_EVENT(hrtimer_expire_entry,
 
-	TP_PROTO(struct hrtimer *timer, ktime_t *now),
+	TP_PROTO(struct hrtimer *hrtimer, ktime_t *now),
 
-	TP_ARGS(timer, now),
+	TP_ARGS(hrtimer, now),
 
 	TP_STRUCT__entry(
-		__field( void *,	timer	)
+		__field( void *,	hrtimer	)
 		__field( s64,		now	)
 	),
 
 	TP_fast_assign(
-		__entry->timer	= timer;
-		__entry->now	= now->tv64;
+		__entry->hrtimer	= hrtimer;
+		__entry->now		= now->tv64;
 	),
 
-	TP_printk("hrtimer %p, now %llu", __entry->timer,
-		  (unsigned long long)ktime_to_ns((ktime_t) {
-				  .tv64 = __entry->now }))
+	TP_printk("hrtimer=%p now=%llu", __entry->hrtimer,
+		  (unsigned long long)ktime_to_ns((ktime_t) { .tv64 = __entry->now }))
  );
 
 /**
@@ -234,40 +233,40 @@
  */
 TRACE_EVENT(hrtimer_expire_exit,
 
-	TP_PROTO(struct hrtimer *timer),
+	TP_PROTO(struct hrtimer *hrtimer),
 
-	TP_ARGS(timer),
+	TP_ARGS(hrtimer),
 
 	TP_STRUCT__entry(
-		__field( void *,	timer	)
+		__field( void *,	hrtimer	)
 	),
 
 	TP_fast_assign(
-		__entry->timer	= timer;
+		__entry->hrtimer	= hrtimer;
 	),
 
-	TP_printk("hrtimer %p", __entry->timer)
+	TP_printk("hrtimer=%p", __entry->hrtimer)
 );
 
 /**
  * hrtimer_cancel - called when the hrtimer is canceled
- * @timer:	pointer to struct hrtimer
+ * @hrtimer:	pointer to struct hrtimer
  */
 TRACE_EVENT(hrtimer_cancel,
 
-	TP_PROTO(struct hrtimer *timer),
+	TP_PROTO(struct hrtimer *hrtimer),
 
-	TP_ARGS(timer),
+	TP_ARGS(hrtimer),
 
 	TP_STRUCT__entry(
-		__field( void *,	timer	)
+		__field( void *,	hrtimer	)
 	),
 
 	TP_fast_assign(
-		__entry->timer	= timer;
+		__entry->hrtimer	= hrtimer;
 	),
 
-	TP_printk("hrtimer %p", __entry->timer)
+	TP_printk("hrtimer=%p", __entry->hrtimer)
 );
 
 /**
@@ -302,7 +301,7 @@
 		__entry->interval_usec	= value->it_interval.tv_usec;
 	),
 
-	TP_printk("which %d, expires %lu, it_value %lu.%lu, it_interval %lu.%lu",
+	TP_printk("which=%d expires=%lu it_value=%lu.%lu it_interval=%lu.%lu",
 		  __entry->which, __entry->expires,
 		  __entry->value_sec, __entry->value_usec,
 		  __entry->interval_sec, __entry->interval_usec)
@@ -332,7 +331,7 @@
 		__entry->pid	= pid_nr(pid);
 	),
 
-	    TP_printk("which %d, pid %d, now %lu", __entry->which,
+	    TP_printk("which=%d pid=%d now=%lu", __entry->which,
 		      (int) __entry->pid, __entry->now)
 );
 
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index e4612db..d6c9744 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -8,7 +8,7 @@
 #include <linux/sched.h>
 #include <linux/tracepoint.h>
 
-TRACE_EVENT(workqueue_insertion,
+DECLARE_EVENT_CLASS(workqueue,
 
 	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
 
@@ -30,26 +30,18 @@
 		__entry->thread_pid, __entry->func)
 );
 
-TRACE_EVENT(workqueue_execution,
+DEFINE_EVENT(workqueue, workqueue_insertion,
 
 	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
 
-	TP_ARGS(wq_thread, work),
+	TP_ARGS(wq_thread, work)
+);
 
-	TP_STRUCT__entry(
-		__array(char,		thread_comm,	TASK_COMM_LEN)
-		__field(pid_t,		thread_pid)
-		__field(work_func_t,	func)
-	),
+DEFINE_EVENT(workqueue, workqueue_execution,
 
-	TP_fast_assign(
-		memcpy(__entry->thread_comm, wq_thread->comm, TASK_COMM_LEN);
-		__entry->thread_pid	= wq_thread->pid;
-		__entry->func		= work->func;
-	),
+	TP_PROTO(struct task_struct *wq_thread, struct work_struct *work),
 
-	TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
-		__entry->thread_pid, __entry->func)
+	TP_ARGS(wq_thread, work)
 );
 
 /* Trace the creation of one workqueue thread on a cpu */
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index cc0d966..d1b3de9 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -18,6 +18,26 @@
 
 #include <linux/ftrace_event.h>
 
+/*
+ * DECLARE_EVENT_CLASS can be used to add a generic function
+ * handlers for events. That is, if all events have the same
+ * parameters and just have distinct trace points.
+ * Each tracepoint can be defined with DEFINE_EVENT and that
+ * will map the DECLARE_EVENT_CLASS to the tracepoint.
+ *
+ * TRACE_EVENT is a one to one mapping between tracepoint and template.
+ */
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, args, tstruct, assign, print) \
+	DECLARE_EVENT_CLASS(name,			       \
+			     PARAMS(proto),		       \
+			     PARAMS(args),		       \
+			     PARAMS(tstruct),		       \
+			     PARAMS(assign),		       \
+			     PARAMS(print));		       \
+	DEFINE_EVENT(name, name, PARAMS(proto), PARAMS(args));
+
+
 #undef __field
 #define __field(type, item)		type	item;
 
@@ -36,15 +56,21 @@
 #undef TP_STRUCT__entry
 #define TP_STRUCT__entry(args...) args
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
-	struct ftrace_raw_##name {				\
-		struct trace_entry	ent;			\
-		tstruct						\
-		char			__data[0];		\
-	};							\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(name, proto, args, tstruct, assign, print)	\
+	struct ftrace_raw_##name {					\
+		struct trace_entry	ent;				\
+		tstruct							\
+		char			__data[0];			\
+	};
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)	\
 	static struct ftrace_event_call event_##name
 
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #undef __cpparg
 #define __cpparg(arg...) arg
 
@@ -89,12 +115,19 @@
 #undef __string
 #define __string(item, src) __dynamic_array(char, item, -1)
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
 	struct ftrace_data_offsets_##call {				\
 		tstruct;						\
 	};
 
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 /*
@@ -120,9 +153,10 @@
 #undef __field
 #define __field(type, item)					\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
-			       "offset:%u;\tsize:%u;\n",		\
+			       "offset:%u;\tsize:%u;\tsigned:%u;\n",	\
 			       (unsigned int)offsetof(typeof(field), item), \
-			       (unsigned int)sizeof(field.item));	\
+			       (unsigned int)sizeof(field.item),	\
+			       (unsigned int)is_signed_type(type));	\
 	if (!ret)							\
 		return 0;
 
@@ -132,19 +166,21 @@
 #undef __array
 #define __array(type, item, len)						\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t"	\
-			       "offset:%u;\tsize:%u;\n",		\
+			       "offset:%u;\tsize:%u;\tsigned:%u;\n",	\
 			       (unsigned int)offsetof(typeof(field), item), \
-			       (unsigned int)sizeof(field.item));	\
+			       (unsigned int)sizeof(field.item),	\
+			       (unsigned int)is_signed_type(type));	\
 	if (!ret)							\
 		return 0;
 
 #undef __dynamic_array
 #define __dynamic_array(type, item, len)				       \
 	ret = trace_seq_printf(s, "\tfield:__data_loc " #type "[] " #item ";\t"\
-			       "offset:%u;\tsize:%u;\n",		       \
+			       "offset:%u;\tsize:%u;\tsigned:%u;\n",	       \
 			       (unsigned int)offsetof(typeof(field),	       \
 					__data_loc_##item),		       \
-			       (unsigned int)sizeof(field.__data_loc_##item)); \
+			       (unsigned int)sizeof(field.__data_loc_##item), \
+			       (unsigned int)is_signed_type(type));	\
 	if (!ret)							       \
 		return 0;
 
@@ -159,7 +195,7 @@
 #undef __get_str
 
 #undef TP_printk
-#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
+#define TP_printk(fmt, args...) "\"%s\", %s\n", fmt, __stringify(args)
 
 #undef TP_fast_assign
 #define TP_fast_assign(args...) args
@@ -167,17 +203,50 @@
 #undef TP_perf_assign
 #define TP_perf_assign(args...)
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, func, print)	\
 static int								\
-ftrace_format_##call(struct ftrace_event_call *unused,			\
-		      struct trace_seq *s)				\
+ftrace_format_setup_##call(struct ftrace_event_call *unused,		\
+			   struct trace_seq *s)				\
 {									\
 	struct ftrace_raw_##call field __attribute__((unused));		\
 	int ret = 0;							\
 									\
 	tstruct;							\
 									\
+	return ret;							\
+}									\
+									\
+static int								\
+ftrace_format_##call(struct ftrace_event_call *unused,			\
+		     struct trace_seq *s)				\
+{									\
+	int ret = 0;							\
+									\
+	ret = ftrace_format_setup_##call(unused, s);			\
+	if (!ret)							\
+		return ret;						\
+									\
+	ret = trace_seq_printf(s, "\nprint fmt: " print);		\
+									\
+	return ret;							\
+}
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)		\
+static int								\
+ftrace_format_##name(struct ftrace_event_call *unused,			\
+		      struct trace_seq *s)				\
+{									\
+	int ret = 0;							\
+									\
+	ret = ftrace_format_setup_##template(unused, s);		\
+	if (!ret)							\
+		return ret;						\
+									\
 	trace_seq_printf(s, "\nprint fmt: " print);			\
 									\
 	return ret;							\
@@ -252,13 +321,55 @@
 		ftrace_print_symbols_seq(p, value, symbols);		\
 	})
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+static enum print_line_t						\
+ftrace_raw_output_id_##call(int event_id, const char *name,		\
+			    struct trace_iterator *iter, int flags)	\
+{									\
+	struct trace_seq *s = &iter->seq;				\
+	struct ftrace_raw_##call *field;				\
+	struct trace_entry *entry;					\
+	struct trace_seq *p;						\
+	int ret;							\
+									\
+	entry = iter->ent;						\
+									\
+	if (entry->type != event_id) {					\
+		WARN_ON_ONCE(1);					\
+		return TRACE_TYPE_UNHANDLED;				\
+	}								\
+									\
+	field = (typeof(field))entry;					\
+									\
+	p = &get_cpu_var(ftrace_event_seq);				\
+	trace_seq_init(p);						\
+	ret = trace_seq_printf(s, "%s: ", name);			\
+	if (ret)							\
+		ret = trace_seq_printf(s, print);			\
+	put_cpu();							\
+	if (!ret)							\
+		return TRACE_TYPE_PARTIAL_LINE;				\
+									\
+	return TRACE_TYPE_HANDLED;					\
+}
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)			\
+static enum print_line_t						\
+ftrace_raw_output_##name(struct trace_iterator *iter, int flags)	\
+{									\
+	return ftrace_raw_output_id_##template(event_##name.id,		\
+					       #name, iter, flags);	\
+}
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, call, proto, args, print)		\
 static enum print_line_t						\
 ftrace_raw_output_##call(struct trace_iterator *iter, int flags)	\
 {									\
 	struct trace_seq *s = &iter->seq;				\
-	struct ftrace_raw_##call *field;				\
+	struct ftrace_raw_##template *field;				\
 	struct trace_entry *entry;					\
 	struct trace_seq *p;						\
 	int ret;							\
@@ -274,14 +385,16 @@
 									\
 	p = &get_cpu_var(ftrace_event_seq);				\
 	trace_seq_init(p);						\
-	ret = trace_seq_printf(s, #call ": " print);			\
+	ret = trace_seq_printf(s, "%s: ", #call);			\
+	if (ret)							\
+		ret = trace_seq_printf(s, print);			\
 	put_cpu();							\
 	if (!ret)							\
 		return TRACE_TYPE_PARTIAL_LINE;				\
 									\
 	return TRACE_TYPE_HANDLED;					\
 }
-	
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 #undef __field_ext
@@ -315,8 +428,8 @@
 #undef __string
 #define __string(item, src) __dynamic_array(char, item, -1)
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, func, print)	\
 static int								\
 ftrace_define_fields_##call(struct ftrace_event_call *event_call)	\
 {									\
@@ -332,6 +445,13 @@
 	return ret;							\
 }
 
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 /*
@@ -358,10 +478,10 @@
 	__data_size += (len) * sizeof(type);
 
 #undef __string
-#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)       \
+#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1)
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
 static inline int ftrace_get_offsets_##call(				\
 	struct ftrace_data_offsets_##call *__data_offsets, proto)       \
 {									\
@@ -373,6 +493,13 @@
 	return __data_size;						\
 }
 
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 #ifdef CONFIG_EVENT_PROFILE
@@ -394,21 +521,28 @@
  *
  */
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, name, proto, args)			\
 									\
-static void ftrace_profile_##call(proto);				\
+static void ftrace_profile_##name(proto);				\
 									\
-static int ftrace_profile_enable_##call(void)				\
+static int ftrace_profile_enable_##name(struct ftrace_event_call *unused)\
 {									\
-	return register_trace_##call(ftrace_profile_##call);		\
+	return register_trace_##name(ftrace_profile_##name);		\
 }									\
 									\
-static void ftrace_profile_disable_##call(void)				\
+static void ftrace_profile_disable_##name(struct ftrace_event_call *unused)\
 {									\
-	unregister_trace_##call(ftrace_profile_##call);			\
+	unregister_trace_##name(ftrace_profile_##name);			\
 }
 
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 #endif
@@ -423,7 +557,7 @@
  *	event_trace_printk(_RET_IP_, "<call>: " <fmt>);
  * }
  *
- * static int ftrace_reg_event_<call>(void)
+ * static int ftrace_reg_event_<call>(struct ftrace_event_call *unused)
  * {
  *	int ret;
  *
@@ -434,7 +568,7 @@
  *	return ret;
  * }
  *
- * static void ftrace_unreg_event_<call>(void)
+ * static void ftrace_unreg_event_<call>(struct ftrace_event_call *unused)
  * {
  *	unregister_trace_<call>(ftrace_event_<call>);
  * }
@@ -469,7 +603,7 @@
  *	trace_current_buffer_unlock_commit(buffer, event, irq_flags, pc);
  * }
  *
- * static int ftrace_raw_reg_event_<call>(void)
+ * static int ftrace_raw_reg_event_<call>(struct ftrace_event_call *unused)
  * {
  *	int ret;
  *
@@ -480,7 +614,7 @@
  *	return ret;
  * }
  *
- * static void ftrace_unreg_event_<call>(void)
+ * static void ftrace_unreg_event_<call>(struct ftrace_event_call *unused)
  * {
  *	unregister_trace_<call>(ftrace_raw_event_<call>);
  * }
@@ -489,7 +623,7 @@
  *	.trace			= ftrace_raw_output_<call>, <-- stage 2
  * };
  *
- * static int ftrace_raw_init_event_<call>(void)
+ * static int ftrace_raw_init_event_<call>(struct ftrace_event_call *unused)
  * {
  *	int id;
  *
@@ -547,15 +681,13 @@
 #define __assign_str(dst, src)						\
 	strcpy(__get_str(dst), src);
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
 									\
-static struct ftrace_event_call event_##call;				\
-									\
-static void ftrace_raw_event_##call(proto)				\
+static void ftrace_raw_event_id_##call(struct ftrace_event_call *event_call, \
+				       proto)				\
 {									\
 	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
-	struct ftrace_event_call *event_call = &event_##call;		\
 	struct ring_buffer_event *event;				\
 	struct ftrace_raw_##call *entry;				\
 	struct ring_buffer *buffer;					\
@@ -569,7 +701,7 @@
 	__data_size = ftrace_get_offsets_##call(&__data_offsets, args); \
 									\
 	event = trace_current_buffer_lock_reserve(&buffer,		\
-				 event_##call.id,			\
+				 event_call->id,			\
 				 sizeof(*entry) + __data_size,		\
 				 irq_flags, pc);			\
 	if (!event)							\
@@ -584,9 +716,17 @@
 	if (!filter_current_check_discard(buffer, event_call, entry, event)) \
 		trace_nowake_buffer_unlock_commit(buffer,		\
 						  event, irq_flags, pc); \
+}
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, call, proto, args)			\
+									\
+static void ftrace_raw_event_##call(proto)				\
+{									\
+	ftrace_raw_event_id_##template(&event_##call, args);		\
 }									\
 									\
-static int ftrace_raw_reg_event_##call(void *ptr)			\
+static int ftrace_raw_reg_event_##call(struct ftrace_event_call *unused)\
 {									\
 	int ret;							\
 									\
@@ -597,7 +737,7 @@
 	return ret;							\
 }									\
 									\
-static void ftrace_raw_unreg_event_##call(void *ptr)			\
+static void ftrace_raw_unreg_event_##call(struct ftrace_event_call *unused)\
 {									\
 	unregister_trace_##call(ftrace_raw_event_##call);		\
 }									\
@@ -606,7 +746,7 @@
 	.trace			= ftrace_raw_output_##call,		\
 };									\
 									\
-static int ftrace_raw_init_event_##call(void)				\
+static int ftrace_raw_init_event_##call(struct ftrace_event_call *unused)\
 {									\
 	int id;								\
 									\
@@ -616,7 +756,36 @@
 	event_##call.id = id;						\
 	INIT_LIST_HEAD(&event_##call.fields);				\
 	return 0;							\
-}									\
+}
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
+#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
+
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)
+
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, call, proto, args)			\
+									\
+static struct ftrace_event_call __used					\
+__attribute__((__aligned__(4)))						\
+__attribute__((section("_ftrace_events"))) event_##call = {		\
+	.name			= #call,				\
+	.system			= __stringify(TRACE_SYSTEM),		\
+	.event			= &ftrace_event_type_##call,		\
+	.raw_init		= ftrace_raw_init_event_##call,		\
+	.regfunc		= ftrace_raw_reg_event_##call,		\
+	.unregfunc		= ftrace_raw_unreg_event_##call,	\
+	.show_format		= ftrace_format_##template,		\
+	.define_fields		= ftrace_define_fields_##template,	\
+	_TRACE_PROFILE_INIT(call)					\
+}
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, call, proto, args, print)		\
 									\
 static struct ftrace_event_call __used					\
 __attribute__((__aligned__(4)))						\
@@ -628,7 +797,7 @@
 	.regfunc		= ftrace_raw_reg_event_##call,		\
 	.unregfunc		= ftrace_raw_unreg_event_##call,	\
 	.show_format		= ftrace_format_##call,			\
-	.define_fields		= ftrace_define_fields_##call,		\
+	.define_fields		= ftrace_define_fields_##template,	\
 	_TRACE_PROFILE_INIT(call)					\
 }
 
@@ -646,6 +815,7 @@
  *	struct ftrace_event_call *event_call = &event_<call>;
  *	extern void perf_tp_event(int, u64, u64, void *, int);
  *	struct ftrace_raw_##call *entry;
+ *	struct perf_trace_buf *trace_buf;
  *	u64 __addr = 0, __count = 1;
  *	unsigned long irq_flags;
  *	struct trace_entry *ent;
@@ -670,14 +840,25 @@
  *	__cpu = smp_processor_id();
  *
  *	if (in_nmi())
- *		raw_data = rcu_dereference(trace_profile_buf_nmi);
+ *		trace_buf = rcu_dereference(perf_trace_buf_nmi);
  *	else
- *		raw_data = rcu_dereference(trace_profile_buf);
+ *		trace_buf = rcu_dereference(perf_trace_buf);
  *
- *	if (!raw_data)
+ *	if (!trace_buf)
  *		goto end;
  *
- *	raw_data = per_cpu_ptr(raw_data, __cpu);
+ *	trace_buf = per_cpu_ptr(trace_buf, __cpu);
+ *
+ * 	// Avoid recursion from perf that could mess up the buffer
+ * 	if (trace_buf->recursion++)
+ *		goto end_recursion;
+ *
+ * 	raw_data = trace_buf->buf;
+ *
+ *	// Make recursion update visible before entering perf_tp_event
+ *	// so that we protect from perf recursions.
+ *
+ *	barrier();
  *
  *	//zero dead bytes from alignment to avoid stack leak to userspace:
  *	*(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;
@@ -704,21 +885,26 @@
 #undef __perf_count
 #define __perf_count(c) __count = (c)
 
-#undef TRACE_EVENT
-#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\
-static void ftrace_profile_##call(proto)				\
+#undef DECLARE_EVENT_CLASS
+#define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print)	\
+static void								\
+ftrace_profile_templ_##call(struct ftrace_event_call *event_call,	\
+			    proto)					\
 {									\
 	struct ftrace_data_offsets_##call __maybe_unused __data_offsets;\
-	struct ftrace_event_call *event_call = &event_##call;		\
-	extern void perf_tp_event(int, u64, u64, void *, int);	\
+	extern int perf_swevent_get_recursion_context(void);		\
+	extern void perf_swevent_put_recursion_context(int rctx);	\
+	extern void perf_tp_event(int, u64, u64, void *, int);		\
 	struct ftrace_raw_##call *entry;				\
 	u64 __addr = 0, __count = 1;					\
 	unsigned long irq_flags;					\
 	struct trace_entry *ent;					\
 	int __entry_size;						\
 	int __data_size;						\
+	char *trace_buf;						\
 	char *raw_data;							\
 	int __cpu;							\
+	int rctx;							\
 	int pc;								\
 									\
 	pc = preempt_count();						\
@@ -733,17 +919,22 @@
 		return;							\
 									\
 	local_irq_save(irq_flags);					\
+									\
+	rctx = perf_swevent_get_recursion_context();			\
+	if (rctx < 0)							\
+		goto end_recursion;					\
+									\
 	__cpu = smp_processor_id();					\
 									\
 	if (in_nmi())							\
-		raw_data = rcu_dereference(trace_profile_buf_nmi);		\
+		trace_buf = rcu_dereference(perf_trace_buf_nmi);	\
 	else								\
-		raw_data = rcu_dereference(trace_profile_buf);		\
+		trace_buf = rcu_dereference(perf_trace_buf);		\
 									\
-	if (!raw_data)							\
+	if (!trace_buf)							\
 		goto end;						\
 									\
-	raw_data = per_cpu_ptr(raw_data, __cpu);			\
+	raw_data = per_cpu_ptr(trace_buf, __cpu);			\
 									\
 	*(u64 *)(&raw_data[__entry_size - sizeof(u64)]) = 0ULL;		\
 	entry = (struct ftrace_raw_##call *)raw_data;			\
@@ -759,10 +950,25 @@
 			     __entry_size);				\
 									\
 end:									\
+	perf_swevent_put_recursion_context(rctx);			\
+end_recursion:								\
 	local_irq_restore(irq_flags);					\
 									\
 }
 
+#undef DEFINE_EVENT
+#define DEFINE_EVENT(template, call, proto, args)		\
+static void ftrace_profile_##call(proto)			\
+{								\
+	struct ftrace_event_call *event_call = &event_##call;	\
+								\
+	ftrace_profile_templ_##template(event_call, args);	\
+}
+
+#undef DEFINE_EVENT_PRINT
+#define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 #endif /* CONFIG_EVENT_PROFILE */
 
diff --git a/include/trace/power.h b/include/trace/power.h
deleted file mode 100644
index ef20466..0000000
--- a/include/trace/power.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef _TRACE_POWER_H
-#define _TRACE_POWER_H
-
-#include <linux/ktime.h>
-#include <linux/tracepoint.h>
-
-enum {
-	POWER_NONE = 0,
-	POWER_CSTATE = 1,
-	POWER_PSTATE = 2,
-};
-
-struct power_trace {
-	ktime_t			stamp;
-	ktime_t			end;
-	int			type;
-	int			state;
-};
-
-DECLARE_TRACE(power_start,
-	TP_PROTO(struct power_trace *it, unsigned int type, unsigned int state),
-	      TP_ARGS(it, type, state));
-
-DECLARE_TRACE(power_mark,
-	TP_PROTO(struct power_trace *it, unsigned int type, unsigned int state),
-	      TP_ARGS(it, type, state));
-
-DECLARE_TRACE(power_end,
-	TP_PROTO(struct power_trace *it),
-	      TP_ARGS(it));
-
-#endif /* _TRACE_POWER_H */
diff --git a/include/trace/syscall.h b/include/trace/syscall.h
index 5dc283b..961fda3 100644
--- a/include/trace/syscall.h
+++ b/include/trace/syscall.h
@@ -12,51 +12,48 @@
  * A syscall entry in the ftrace syscalls array.
  *
  * @name: name of the syscall
+ * @syscall_nr: number of the syscall
  * @nb_args: number of parameters it takes
  * @types: list of types as strings
  * @args: list of args as strings (args[i] matches types[i])
- * @enter_id: associated ftrace enter event id
- * @exit_id: associated ftrace exit event id
  * @enter_event: associated syscall_enter trace event
  * @exit_event: associated syscall_exit trace event
  */
 struct syscall_metadata {
 	const char	*name;
+	int		syscall_nr;
 	int		nb_args;
 	const char	**types;
 	const char	**args;
-	int		enter_id;
-	int		exit_id;
 
 	struct ftrace_event_call *enter_event;
 	struct ftrace_event_call *exit_event;
 };
 
 #ifdef CONFIG_FTRACE_SYSCALLS
-extern struct syscall_metadata *syscall_nr_to_meta(int nr);
-extern int syscall_name_to_nr(char *name);
-void set_syscall_enter_id(int num, int id);
-void set_syscall_exit_id(int num, int id);
-extern struct trace_event event_syscall_enter;
-extern struct trace_event event_syscall_exit;
-extern int reg_event_syscall_enter(void *ptr);
-extern void unreg_event_syscall_enter(void *ptr);
-extern int reg_event_syscall_exit(void *ptr);
-extern void unreg_event_syscall_exit(void *ptr);
+extern unsigned long arch_syscall_addr(int nr);
+extern int init_syscall_trace(struct ftrace_event_call *call);
+
 extern int syscall_enter_format(struct ftrace_event_call *call,
 				struct trace_seq *s);
 extern int syscall_exit_format(struct ftrace_event_call *call,
 				struct trace_seq *s);
 extern int syscall_enter_define_fields(struct ftrace_event_call *call);
 extern int syscall_exit_define_fields(struct ftrace_event_call *call);
+extern int reg_event_syscall_enter(struct ftrace_event_call *call);
+extern void unreg_event_syscall_enter(struct ftrace_event_call *call);
+extern int reg_event_syscall_exit(struct ftrace_event_call *call);
+extern void unreg_event_syscall_exit(struct ftrace_event_call *call);
+extern int
+ftrace_format_syscall(struct ftrace_event_call *call, struct trace_seq *s);
 enum print_line_t print_syscall_enter(struct trace_iterator *iter, int flags);
 enum print_line_t print_syscall_exit(struct trace_iterator *iter, int flags);
 #endif
 #ifdef CONFIG_EVENT_PROFILE
-int reg_prof_syscall_enter(char *name);
-void unreg_prof_syscall_enter(char *name);
-int reg_prof_syscall_exit(char *name);
-void unreg_prof_syscall_exit(char *name);
+int prof_sysenter_enable(struct ftrace_event_call *call);
+void prof_sysenter_disable(struct ftrace_event_call *call);
+int prof_sysexit_enable(struct ftrace_event_call *call);
+void prof_sysexit_disable(struct ftrace_event_call *call);
 
 #endif
 
diff --git a/include/video/pxa168fb.h b/include/video/pxa168fb.h
index b5cc72f..8c2f385 100644
--- a/include/video/pxa168fb.h
+++ b/include/video/pxa168fb.h
@@ -117,8 +117,6 @@
 	unsigned	invert_composite_blank:1;
 	unsigned	invert_pix_val_ena:1;
 	unsigned	invert_pixclock:1;
-	unsigned	invert_vsync:1;
-	unsigned	invert_hsync:1;
 	unsigned	panel_rbswap:1;
 	unsigned	active:1;
 	unsigned	enable_lcd:1;
diff --git a/init/Kconfig b/init/Kconfig
index 9e03ef8..54c655c 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -334,6 +334,15 @@
 	  is also required.  It also scales down nicely to
 	  smaller systems.
 
+config TINY_RCU
+	bool "UP-only small-memory-footprint RCU"
+	depends on !SMP
+	help
+	  This option selects the RCU implementation that is
+	  designed for UP systems from which real-time response
+	  is not required.  This option greatly reduces the
+	  memory footprint of RCU.
+
 endchoice
 
 config RCU_TRACE
@@ -606,7 +615,7 @@
 	bool
 
 config SYSFS_DEPRECATED_V2
-	bool "remove sysfs features which may confuse old userspace tools"
+	bool "enable deprecated sysfs features to support old userspace tools"
 	depends on SYSFS
 	default n
 	select SYSFS_DEPRECATED
@@ -754,6 +763,7 @@
 
 config SYSCTL_SYSCALL
 	bool "Sysctl syscall support" if EMBEDDED
+	depends on PROC_SYSCTL
 	default y
 	select SYSCTL
 	---help---
@@ -1098,6 +1108,16 @@
 
 	  See Documentation/slow-work.txt.
 
+config SLOW_WORK_DEBUG
+	bool "Slow work debugging through debugfs"
+	default n
+	depends on SLOW_WORK && DEBUG_FS
+	help
+	  Display the contents of the slow work run queue through debugfs,
+	  including items currently executing.
+
+	  See Documentation/slow-work.txt.
+
 endmenu		# General setup
 
 config HAVE_GENERIC_DMA_COHERENT
@@ -1210,3 +1230,4 @@
 config PREEMPT_NOTIFIERS
 	bool
 
+source "kernel/Kconfig.locks"
diff --git a/init/main.c b/init/main.c
index 5988deb..4051d75 100644
--- a/init/main.c
+++ b/init/main.c
@@ -251,7 +251,7 @@
 
 /*
  * Unknown boot options get handed to init, unless they look like
- * failed parameters
+ * unused parameters (modprobe will find them in /proc/cmdline).
  */
 static int __init unknown_bootoption(char *param, char *val)
 {
@@ -272,14 +272,9 @@
 	if (obsolete_checksetup(param))
 		return 0;
 
-	/*
-	 * Preemptive maintenance for "why didn't my misspelled command
-	 * line work?"
-	 */
-	if (strchr(param, '.') && (!val || strchr(param, '.') < val)) {
-		printk(KERN_ERR "Unknown boot option `%s': ignoring\n", param);
+	/* Unused module parameter. */
+	if (strchr(param, '.') && (!val || strchr(param, '.') < val))
 		return 0;
-	}
 
 	if (panic_later)
 		return 0;
diff --git a/ipc/ipc_sysctl.c b/ipc/ipc_sysctl.c
index 7d37047..56410fa 100644
--- a/ipc/ipc_sysctl.c
+++ b/ipc/ipc_sysctl.c
@@ -129,136 +129,60 @@
 #define proc_ipcauto_dointvec_minmax NULL
 #endif
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-/* The generic sysctl ipc data routine. */
-static int sysctl_ipc_data(ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	size_t len;
-	void *data;
-
-	/* Get out of I don't have a variable */
-	if (!table->data || !table->maxlen)
-		return -ENOTDIR;
-
-	data = get_ipc(table);
-	if (!data)
-		return -ENOTDIR;
-
-	if (oldval && oldlenp) {
-		if (get_user(len, oldlenp))
-			return -EFAULT;
-		if (len) {
-			if (len > table->maxlen)
-				len = table->maxlen;
-			if (copy_to_user(oldval, data, len))
-				return -EFAULT;
-			if (put_user(len, oldlenp))
-				return -EFAULT;
-		}
-	}
-
-	if (newval && newlen) {
-		if (newlen > table->maxlen)
-			newlen = table->maxlen;
-
-		if (copy_from_user(data, newval, newlen))
-			return -EFAULT;
-	}
-	return 1;
-}
-
-static int sysctl_ipc_registered_data(ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	int rc;
-
-	rc = sysctl_ipc_data(table, oldval, oldlenp, newval, newlen);
-
-	if (newval && newlen && rc > 0)
-		/*
-		 * Tunable has successfully been changed from userland
-		 */
-		unregister_ipcns_notifier(current->nsproxy->ipc_ns);
-
-	return rc;
-}
-#else
-#define sysctl_ipc_data NULL
-#define sysctl_ipc_registered_data NULL
-#endif
-
 static int zero;
 static int one = 1;
 
 static struct ctl_table ipc_kern_table[] = {
 	{
-		.ctl_name	= KERN_SHMMAX,
 		.procname	= "shmmax",
 		.data		= &init_ipc_ns.shm_ctlmax,
 		.maxlen		= sizeof (init_ipc_ns.shm_ctlmax),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_doulongvec_minmax,
-		.strategy	= sysctl_ipc_data,
 	},
 	{
-		.ctl_name	= KERN_SHMALL,
 		.procname	= "shmall",
 		.data		= &init_ipc_ns.shm_ctlall,
 		.maxlen		= sizeof (init_ipc_ns.shm_ctlall),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_doulongvec_minmax,
-		.strategy	= sysctl_ipc_data,
 	},
 	{
-		.ctl_name	= KERN_SHMMNI,
 		.procname	= "shmmni",
 		.data		= &init_ipc_ns.shm_ctlmni,
 		.maxlen		= sizeof (init_ipc_ns.shm_ctlmni),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec,
-		.strategy	= sysctl_ipc_data,
 	},
 	{
-		.ctl_name	= KERN_MSGMAX,
 		.procname	= "msgmax",
 		.data		= &init_ipc_ns.msg_ctlmax,
 		.maxlen		= sizeof (init_ipc_ns.msg_ctlmax),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec,
-		.strategy	= sysctl_ipc_data,
 	},
 	{
-		.ctl_name	= KERN_MSGMNI,
 		.procname	= "msgmni",
 		.data		= &init_ipc_ns.msg_ctlmni,
 		.maxlen		= sizeof (init_ipc_ns.msg_ctlmni),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_callback_dointvec,
-		.strategy	= sysctl_ipc_registered_data,
 	},
 	{
-		.ctl_name	= KERN_MSGMNB,
 		.procname	=  "msgmnb",
 		.data		= &init_ipc_ns.msg_ctlmnb,
 		.maxlen		= sizeof (init_ipc_ns.msg_ctlmnb),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec,
-		.strategy	= sysctl_ipc_data,
 	},
 	{
-		.ctl_name	= KERN_SEM,
 		.procname	= "sem",
 		.data		= &init_ipc_ns.sem_ctls,
 		.maxlen		= 4*sizeof (int),
 		.mode		= 0644,
 		.proc_handler	= proc_ipc_dointvec,
-		.strategy	= sysctl_ipc_data,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "auto_msgmni",
 		.data		= &init_ipc_ns.auto_msgmni,
 		.maxlen		= sizeof(int),
@@ -272,7 +196,6 @@
 
 static struct ctl_table ipc_root_table[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= ipc_kern_table,
diff --git a/ipc/mq_sysctl.c b/ipc/mq_sysctl.c
index 8a05871..0c09366 100644
--- a/ipc/mq_sysctl.c
+++ b/ipc/mq_sysctl.c
@@ -88,7 +88,7 @@
 		.extra1		= &msg_maxsize_limit_min,
 		.extra2		= &msg_maxsize_limit_max,
 	},
-	{ .ctl_name = 0 }
+	{}
 };
 
 static ctl_table mq_sysctl_dir[] = {
@@ -97,17 +97,16 @@
 		.mode		= 0555,
 		.child		= mq_sysctls,
 	},
-	{ .ctl_name = 0 }
+	{}
 };
 
 static ctl_table mq_sysctl_root[] = {
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.mode		= 0555,
 		.child		= mq_sysctl_dir,
 	},
-	{ .ctl_name = 0 }
+	{}
 };
 
 struct ctl_table_header *mq_register_sysctl_table(void)
diff --git a/kernel/Kconfig.locks b/kernel/Kconfig.locks
new file mode 100644
index 0000000..88c92fb
--- /dev/null
+++ b/kernel/Kconfig.locks
@@ -0,0 +1,202 @@
+#
+# The ARCH_INLINE foo is necessary because select ignores "depends on"
+#
+config ARCH_INLINE_SPIN_TRYLOCK
+	bool
+
+config ARCH_INLINE_SPIN_TRYLOCK_BH
+	bool
+
+config ARCH_INLINE_SPIN_LOCK
+	bool
+
+config ARCH_INLINE_SPIN_LOCK_BH
+	bool
+
+config ARCH_INLINE_SPIN_LOCK_IRQ
+	bool
+
+config ARCH_INLINE_SPIN_LOCK_IRQSAVE
+	bool
+
+config ARCH_INLINE_SPIN_UNLOCK
+	bool
+
+config ARCH_INLINE_SPIN_UNLOCK_BH
+	bool
+
+config ARCH_INLINE_SPIN_UNLOCK_IRQ
+	bool
+
+config ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
+	bool
+
+
+config ARCH_INLINE_READ_TRYLOCK
+	bool
+
+config ARCH_INLINE_READ_LOCK
+	bool
+
+config ARCH_INLINE_READ_LOCK_BH
+	bool
+
+config ARCH_INLINE_READ_LOCK_IRQ
+	bool
+
+config ARCH_INLINE_READ_LOCK_IRQSAVE
+	bool
+
+config ARCH_INLINE_READ_UNLOCK
+	bool
+
+config ARCH_INLINE_READ_UNLOCK_BH
+	bool
+
+config ARCH_INLINE_READ_UNLOCK_IRQ
+	bool
+
+config ARCH_INLINE_READ_UNLOCK_IRQRESTORE
+	bool
+
+
+config ARCH_INLINE_WRITE_TRYLOCK
+	bool
+
+config ARCH_INLINE_WRITE_LOCK
+	bool
+
+config ARCH_INLINE_WRITE_LOCK_BH
+	bool
+
+config ARCH_INLINE_WRITE_LOCK_IRQ
+	bool
+
+config ARCH_INLINE_WRITE_LOCK_IRQSAVE
+	bool
+
+config ARCH_INLINE_WRITE_UNLOCK
+	bool
+
+config ARCH_INLINE_WRITE_UNLOCK_BH
+	bool
+
+config ARCH_INLINE_WRITE_UNLOCK_IRQ
+	bool
+
+config ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
+	bool
+
+#
+# lock_* functions are inlined when:
+#   - DEBUG_SPINLOCK=n and GENERIC_LOCKBREAK=n and ARCH_INLINE_*LOCK=y
+#
+# trylock_* functions are inlined when:
+#   - DEBUG_SPINLOCK=n and ARCH_INLINE_*LOCK=y
+#
+# unlock and unlock_irq functions are inlined when:
+#   - DEBUG_SPINLOCK=n and ARCH_INLINE_*LOCK=y
+#  or
+#   - DEBUG_SPINLOCK=n and PREEMPT=n
+#
+# unlock_bh and unlock_irqrestore functions are inlined when:
+#   - DEBUG_SPINLOCK=n and ARCH_INLINE_*LOCK=y
+#
+
+config INLINE_SPIN_TRYLOCK
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_SPIN_TRYLOCK
+
+config INLINE_SPIN_TRYLOCK_BH
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_SPIN_TRYLOCK_BH
+
+config INLINE_SPIN_LOCK
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && ARCH_INLINE_SPIN_LOCK
+
+config INLINE_SPIN_LOCK_BH
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_SPIN_LOCK_BH
+
+config INLINE_SPIN_LOCK_IRQ
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_SPIN_LOCK_IRQ
+
+config INLINE_SPIN_LOCK_IRQSAVE
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_SPIN_LOCK_IRQSAVE
+
+config INLINE_SPIN_UNLOCK
+	def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_SPIN_UNLOCK)
+
+config INLINE_SPIN_UNLOCK_BH
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_SPIN_UNLOCK_BH
+
+config INLINE_SPIN_UNLOCK_IRQ
+	def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_SPIN_UNLOCK_BH)
+
+config INLINE_SPIN_UNLOCK_IRQRESTORE
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
+
+
+config INLINE_READ_TRYLOCK
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_READ_TRYLOCK
+
+config INLINE_READ_LOCK
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && ARCH_INLINE_READ_LOCK
+
+config INLINE_READ_LOCK_BH
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_READ_LOCK_BH
+
+config INLINE_READ_LOCK_IRQ
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_READ_LOCK_IRQ
+
+config INLINE_READ_LOCK_IRQSAVE
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_READ_LOCK_IRQSAVE
+
+config INLINE_READ_UNLOCK
+	def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_READ_UNLOCK)
+
+config INLINE_READ_UNLOCK_BH
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_READ_UNLOCK_BH
+
+config INLINE_READ_UNLOCK_IRQ
+	def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_READ_UNLOCK_BH)
+
+config INLINE_READ_UNLOCK_IRQRESTORE
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_READ_UNLOCK_IRQRESTORE
+
+
+config INLINE_WRITE_TRYLOCK
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_WRITE_TRYLOCK
+
+config INLINE_WRITE_LOCK
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && ARCH_INLINE_WRITE_LOCK
+
+config INLINE_WRITE_LOCK_BH
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_WRITE_LOCK_BH
+
+config INLINE_WRITE_LOCK_IRQ
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_WRITE_LOCK_IRQ
+
+config INLINE_WRITE_LOCK_IRQSAVE
+	def_bool !DEBUG_SPINLOCK && !GENERIC_LOCKBREAK && \
+		 ARCH_INLINE_WRITE_LOCK_IRQSAVE
+
+config INLINE_WRITE_UNLOCK
+	def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_WRITE_UNLOCK)
+
+config INLINE_WRITE_UNLOCK_BH
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_WRITE_UNLOCK_BH
+
+config INLINE_WRITE_UNLOCK_IRQ
+	def_bool !DEBUG_SPINLOCK && (!PREEMPT || ARCH_INLINE_WRITE_UNLOCK_BH)
+
+config INLINE_WRITE_UNLOCK_IRQRESTORE
+	def_bool !DEBUG_SPINLOCK && ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
+
+config MUTEX_SPIN_ON_OWNER
+	def_bool SMP && !DEBUG_MUTEXES && !HAVE_DEFAULT_NO_SPIN_MUTEXES
diff --git a/kernel/Makefile b/kernel/Makefile
index b8d4cd8..864ff75 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -4,7 +4,7 @@
 
 obj-y     = sched.o fork.o exec_domain.o panic.o printk.o \
 	    cpu.o exit.o itimer.o time.o softirq.o resource.o \
-	    sysctl.o capability.o ptrace.o timer.o user.o \
+	    sysctl.o sysctl_binary.o capability.o ptrace.o timer.o user.o \
 	    signal.o sys.o kmod.o workqueue.o pid.o \
 	    rcupdate.o extable.o params.o posix-timers.o \
 	    kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
@@ -21,6 +21,7 @@
 CFLAGS_REMOVE_rtmutex-debug.o = -pg
 CFLAGS_REMOVE_cgroup-debug.o = -pg
 CFLAGS_REMOVE_sched_clock.o = -pg
+CFLAGS_REMOVE_perf_event.o = -pg
 endif
 
 obj-$(CONFIG_FREEZER) += freezer.o
@@ -82,6 +83,7 @@
 obj-$(CONFIG_TREE_RCU) += rcutree.o
 obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o
 obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o
+obj-$(CONFIG_TINY_RCU) += rcutiny.o
 obj-$(CONFIG_RELAY) += relay.o
 obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
 obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
@@ -94,7 +96,10 @@
 obj-$(CONFIG_RING_BUFFER) += trace/
 obj-$(CONFIG_SMP) += sched_cpupri.o
 obj-$(CONFIG_SLOW_WORK) += slow-work.o
+obj-$(CONFIG_SLOW_WORK_DEBUG) += slow-work-debugfs.o
 obj-$(CONFIG_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
+obj-$(CONFIG_USER_RETURN_NOTIFIER) += user-return-notifier.o
 
 ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y)
 # According to Alan Modra <alan@linuxcare.com.au>, the -fno-omit-frame-pointer is
diff --git a/kernel/capability.c b/kernel/capability.c
index 4e17041..7f876e6 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -29,7 +29,6 @@
 EXPORT_SYMBOL(__cap_full_set);
 EXPORT_SYMBOL(__cap_init_eff_set);
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
 int file_caps_enabled = 1;
 
 static int __init file_caps_disable(char *str)
@@ -38,7 +37,6 @@
 	return 1;
 }
 __setup("no_file_caps", file_caps_disable);
-#endif
 
 /*
  * More recent versions of libcap are available from:
@@ -169,8 +167,8 @@
 	kernel_cap_t pE, pI, pP;
 
 	ret = cap_validate_magic(header, &tocopy);
-	if (ret != 0)
-		return ret;
+	if ((dataptr == NULL) || (ret != 0))
+		return ((dataptr == NULL) && (ret == -EINVAL)) ? 0 : ret;
 
 	if (get_user(pid, &header->pid))
 		return -EFAULT;
@@ -238,7 +236,7 @@
 SYSCALL_DEFINE2(capset, cap_user_header_t, header, const cap_user_data_t, data)
 {
 	struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
-	unsigned i, tocopy;
+	unsigned i, tocopy, copybytes;
 	kernel_cap_t inheritable, permitted, effective;
 	struct cred *new;
 	int ret;
@@ -255,8 +253,11 @@
 	if (pid != 0 && pid != task_pid_vnr(current))
 		return -EPERM;
 
-	if (copy_from_user(&kdata, data,
-			   tocopy * sizeof(struct __user_cap_data_struct)))
+	copybytes = tocopy * sizeof(struct __user_cap_data_struct);
+	if (copybytes > sizeof(kdata))
+		return -EFAULT;
+
+	if (copy_from_user(&kdata, data, copybytes))
 		return -EFAULT;
 
 	for (i = 0; i < tocopy; i++) {
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index b5cb469d..3cf2183 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -537,8 +537,7 @@
  *	element of the partition (one sched domain) to be passed to
  *	partition_sched_domains().
  */
-/* FIXME: see the FIXME in partition_sched_domains() */
-static int generate_sched_domains(struct cpumask **domains,
+static int generate_sched_domains(cpumask_var_t **domains,
 			struct sched_domain_attr **attributes)
 {
 	LIST_HEAD(q);		/* queue of cpusets to be scanned */
@@ -546,7 +545,7 @@
 	struct cpuset **csa;	/* array of all cpuset ptrs */
 	int csn;		/* how many cpuset ptrs in csa so far */
 	int i, j, k;		/* indices for partition finding loops */
-	struct cpumask *doms;	/* resulting partition; i.e. sched domains */
+	cpumask_var_t *doms;	/* resulting partition; i.e. sched domains */
 	struct sched_domain_attr *dattr;  /* attributes for custom domains */
 	int ndoms = 0;		/* number of sched domains in result */
 	int nslot;		/* next empty doms[] struct cpumask slot */
@@ -557,7 +556,8 @@
 
 	/* Special case for the 99% of systems with one, full, sched domain */
 	if (is_sched_load_balance(&top_cpuset)) {
-		doms = kmalloc(cpumask_size(), GFP_KERNEL);
+		ndoms = 1;
+		doms = alloc_sched_domains(ndoms);
 		if (!doms)
 			goto done;
 
@@ -566,9 +566,8 @@
 			*dattr = SD_ATTR_INIT;
 			update_domain_attr_tree(dattr, &top_cpuset);
 		}
-		cpumask_copy(doms, top_cpuset.cpus_allowed);
+		cpumask_copy(doms[0], top_cpuset.cpus_allowed);
 
-		ndoms = 1;
 		goto done;
 	}
 
@@ -636,7 +635,7 @@
 	 * Now we know how many domains to create.
 	 * Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
 	 */
-	doms = kmalloc(ndoms * cpumask_size(), GFP_KERNEL);
+	doms = alloc_sched_domains(ndoms);
 	if (!doms)
 		goto done;
 
@@ -656,7 +655,7 @@
 			continue;
 		}
 
-		dp = doms + nslot;
+		dp = doms[nslot];
 
 		if (nslot == ndoms) {
 			static int warnings = 10;
@@ -718,7 +717,7 @@
 static void do_rebuild_sched_domains(struct work_struct *unused)
 {
 	struct sched_domain_attr *attr;
-	struct cpumask *doms;
+	cpumask_var_t *doms;
 	int ndoms;
 
 	get_online_cpus();
@@ -2052,7 +2051,7 @@
 				unsigned long phase, void *unused_cpu)
 {
 	struct sched_domain_attr *attr;
-	struct cpumask *doms;
+	cpumask_var_t *doms;
 	int ndoms;
 
 	switch (phase) {
@@ -2537,15 +2536,9 @@
 };
 #endif /* CONFIG_PROC_PID_CPUSET */
 
-/* Display task cpus_allowed, mems_allowed in /proc/<pid>/status file. */
+/* Display task mems_allowed in /proc/<pid>/status file. */
 void cpuset_task_status_allowed(struct seq_file *m, struct task_struct *task)
 {
-	seq_printf(m, "Cpus_allowed:\t");
-	seq_cpumask(m, &task->cpus_allowed);
-	seq_printf(m, "\n");
-	seq_printf(m, "Cpus_allowed_list:\t");
-	seq_cpumask_list(m, &task->cpus_allowed);
-	seq_printf(m, "\n");
 	seq_printf(m, "Mems_allowed:\t");
 	seq_nodemask(m, &task->mems_allowed);
 	seq_printf(m, "\n");
diff --git a/kernel/exit.c b/kernel/exit.c
index f7864ac..1143012 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -49,6 +49,7 @@
 #include <linux/init_task.h>
 #include <linux/perf_event.h>
 #include <trace/events/sched.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -110,9 +111,9 @@
 		 * We won't ever get here for the group leader, since it
 		 * will have been the last reference on the signal_struct.
 		 */
-		sig->utime = cputime_add(sig->utime, task_utime(tsk));
-		sig->stime = cputime_add(sig->stime, task_stime(tsk));
-		sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
+		sig->utime = cputime_add(sig->utime, tsk->utime);
+		sig->stime = cputime_add(sig->stime, tsk->stime);
+		sig->gtime = cputime_add(sig->gtime, tsk->gtime);
 		sig->min_flt += tsk->min_flt;
 		sig->maj_flt += tsk->maj_flt;
 		sig->nvcsw += tsk->nvcsw;
@@ -978,6 +979,10 @@
 	proc_exit_connector(tsk);
 
 	/*
+	 * FIXME: do that only when needed, using sched_exit tracepoint
+	 */
+	flush_ptrace_hw_breakpoint(tsk);
+	/*
 	 * Flush inherited counters to the parent - before the parent
 	 * gets woken up by child-exit notifications.
 	 */
@@ -1004,7 +1009,7 @@
 	tsk->flags |= PF_EXITPIDONE;
 
 	if (tsk->io_context)
-		exit_io_context();
+		exit_io_context(tsk);
 
 	if (tsk->splice_pipe)
 		__free_pipe_info(tsk->splice_pipe);
@@ -1205,6 +1210,7 @@
 		struct signal_struct *psig;
 		struct signal_struct *sig;
 		unsigned long maxrss;
+		cputime_t tgutime, tgstime;
 
 		/*
 		 * The resource counters for the group leader are in its
@@ -1220,20 +1226,23 @@
 		 * need to protect the access to parent->signal fields,
 		 * as other threads in the parent group can be right
 		 * here reaping other children at the same time.
+		 *
+		 * We use thread_group_times() to get times for the thread
+		 * group, which consolidates times for all threads in the
+		 * group including the group leader.
 		 */
+		thread_group_times(p, &tgutime, &tgstime);
 		spin_lock_irq(&p->real_parent->sighand->siglock);
 		psig = p->real_parent->signal;
 		sig = p->signal;
 		psig->cutime =
 			cputime_add(psig->cutime,
-			cputime_add(p->utime,
-			cputime_add(sig->utime,
-				    sig->cutime)));
+			cputime_add(tgutime,
+				    sig->cutime));
 		psig->cstime =
 			cputime_add(psig->cstime,
-			cputime_add(p->stime,
-			cputime_add(sig->stime,
-				    sig->cstime)));
+			cputime_add(tgstime,
+				    sig->cstime));
 		psig->cgtime =
 			cputime_add(psig->cgtime,
 			cputime_add(p->gtime,
diff --git a/kernel/fork.c b/kernel/fork.c
index 166b8c4..1415dc4 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -64,6 +64,7 @@
 #include <linux/magic.h>
 #include <linux/perf_event.h>
 #include <linux/posix-timers.h>
+#include <linux/user-return-notifier.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -249,6 +250,7 @@
 		goto out;
 
 	setup_thread_stack(tsk, orig);
+	clear_user_return_notifier(tsk);
 	stackend = end_of_stack(tsk);
 	*stackend = STACK_END_MAGIC;	/* for overflow detection */
 
@@ -884,6 +886,9 @@
 	sig->utime = sig->stime = sig->cutime = sig->cstime = cputime_zero;
 	sig->gtime = cputime_zero;
 	sig->cgtime = cputime_zero;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+	sig->prev_utime = sig->prev_stime = cputime_zero;
+#endif
 	sig->nvcsw = sig->nivcsw = sig->cnvcsw = sig->cnivcsw = 0;
 	sig->min_flt = sig->maj_flt = sig->cmin_flt = sig->cmaj_flt = 0;
 	sig->inblock = sig->oublock = sig->cinblock = sig->coublock = 0;
@@ -1066,8 +1071,10 @@
 	p->gtime = cputime_zero;
 	p->utimescaled = cputime_zero;
 	p->stimescaled = cputime_zero;
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
 	p->prev_utime = cputime_zero;
 	p->prev_stime = cputime_zero;
+#endif
 
 	p->default_timer_slack_ns = current->timer_slack_ns;
 
@@ -1310,7 +1317,8 @@
 	if (pid != &init_struct_pid)
 		free_pid(pid);
 bad_fork_cleanup_io:
-	put_io_context(p->io_context);
+	if (p->io_context)
+		exit_io_context(p);
 bad_fork_cleanup_namespaces:
 	exit_task_namespaces(p);
 bad_fork_cleanup_mm:
diff --git a/kernel/hung_task.c b/kernel/hung_task.c
index d4e8417..0c642d5 100644
--- a/kernel/hung_task.c
+++ b/kernel/hung_task.c
@@ -144,7 +144,7 @@
 
 	rcu_read_lock();
 	do_each_thread(g, t) {
-		if (!--max_count)
+		if (!max_count--)
 			goto unlock;
 		if (!--batch_count) {
 			batch_count = HUNG_TASK_BATCHING;
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
new file mode 100644
index 0000000..cf5ee16
--- /dev/null
+++ b/kernel/hw_breakpoint.c
@@ -0,0 +1,423 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 Alan Stern
+ * Copyright (C) IBM Corporation, 2009
+ * Copyright (C) 2009, Frederic Weisbecker <fweisbec@gmail.com>
+ *
+ * Thanks to Ingo Molnar for his many suggestions.
+ *
+ * Authors: Alan Stern <stern@rowland.harvard.edu>
+ *          K.Prasad <prasad@linux.vnet.ibm.com>
+ *          Frederic Weisbecker <fweisbec@gmail.com>
+ */
+
+/*
+ * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
+ * using the CPU's debug registers.
+ * This file contains the arch-independent routines.
+ */
+
+#include <linux/irqflags.h>
+#include <linux/kallsyms.h>
+#include <linux/notifier.h>
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <linux/hw_breakpoint.h>
+
+/*
+ * Constraints data
+ */
+
+/* Number of pinned cpu breakpoints in a cpu */
+static DEFINE_PER_CPU(unsigned int, nr_cpu_bp_pinned);
+
+/* Number of pinned task breakpoints in a cpu */
+static DEFINE_PER_CPU(unsigned int, task_bp_pinned[HBP_NUM]);
+
+/* Number of non-pinned cpu/task breakpoints in a cpu */
+static DEFINE_PER_CPU(unsigned int, nr_bp_flexible);
+
+/* Gather the number of total pinned and un-pinned bp in a cpuset */
+struct bp_busy_slots {
+	unsigned int pinned;
+	unsigned int flexible;
+};
+
+/* Serialize accesses to the above constraints */
+static DEFINE_MUTEX(nr_bp_mutex);
+
+/*
+ * Report the maximum number of pinned breakpoints a task
+ * have in this cpu
+ */
+static unsigned int max_task_bp_pinned(int cpu)
+{
+	int i;
+	unsigned int *tsk_pinned = per_cpu(task_bp_pinned, cpu);
+
+	for (i = HBP_NUM -1; i >= 0; i--) {
+		if (tsk_pinned[i] > 0)
+			return i + 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Report the number of pinned/un-pinned breakpoints we have in
+ * a given cpu (cpu > -1) or in all of them (cpu = -1).
+ */
+static void fetch_bp_busy_slots(struct bp_busy_slots *slots, int cpu)
+{
+	if (cpu >= 0) {
+		slots->pinned = per_cpu(nr_cpu_bp_pinned, cpu);
+		slots->pinned += max_task_bp_pinned(cpu);
+		slots->flexible = per_cpu(nr_bp_flexible, cpu);
+
+		return;
+	}
+
+	for_each_online_cpu(cpu) {
+		unsigned int nr;
+
+		nr = per_cpu(nr_cpu_bp_pinned, cpu);
+		nr += max_task_bp_pinned(cpu);
+
+		if (nr > slots->pinned)
+			slots->pinned = nr;
+
+		nr = per_cpu(nr_bp_flexible, cpu);
+
+		if (nr > slots->flexible)
+			slots->flexible = nr;
+	}
+}
+
+/*
+ * Add a pinned breakpoint for the given task in our constraint table
+ */
+static void toggle_bp_task_slot(struct task_struct *tsk, int cpu, bool enable)
+{
+	int count = 0;
+	struct perf_event *bp;
+	struct perf_event_context *ctx = tsk->perf_event_ctxp;
+	unsigned int *tsk_pinned;
+	struct list_head *list;
+	unsigned long flags;
+
+	if (WARN_ONCE(!ctx, "No perf context for this task"))
+		return;
+
+	list = &ctx->event_list;
+
+	spin_lock_irqsave(&ctx->lock, flags);
+
+	/*
+	 * The current breakpoint counter is not included in the list
+	 * at the open() callback time
+	 */
+	list_for_each_entry(bp, list, event_entry) {
+		if (bp->attr.type == PERF_TYPE_BREAKPOINT)
+			count++;
+	}
+
+	spin_unlock_irqrestore(&ctx->lock, flags);
+
+	if (WARN_ONCE(count < 0, "No breakpoint counter found in the counter list"))
+		return;
+
+	tsk_pinned = per_cpu(task_bp_pinned, cpu);
+	if (enable) {
+		tsk_pinned[count]++;
+		if (count > 0)
+			tsk_pinned[count-1]--;
+	} else {
+		tsk_pinned[count]--;
+		if (count > 0)
+			tsk_pinned[count-1]++;
+	}
+}
+
+/*
+ * Add/remove the given breakpoint in our constraint table
+ */
+static void toggle_bp_slot(struct perf_event *bp, bool enable)
+{
+	int cpu = bp->cpu;
+	struct task_struct *tsk = bp->ctx->task;
+
+	/* Pinned counter task profiling */
+	if (tsk) {
+		if (cpu >= 0) {
+			toggle_bp_task_slot(tsk, cpu, enable);
+			return;
+		}
+
+		for_each_online_cpu(cpu)
+			toggle_bp_task_slot(tsk, cpu, enable);
+		return;
+	}
+
+	/* Pinned counter cpu profiling */
+	if (enable)
+		per_cpu(nr_cpu_bp_pinned, bp->cpu)++;
+	else
+		per_cpu(nr_cpu_bp_pinned, bp->cpu)--;
+}
+
+/*
+ * Contraints to check before allowing this new breakpoint counter:
+ *
+ *  == Non-pinned counter == (Considered as pinned for now)
+ *
+ *   - If attached to a single cpu, check:
+ *
+ *       (per_cpu(nr_bp_flexible, cpu) || (per_cpu(nr_cpu_bp_pinned, cpu)
+ *           + max(per_cpu(task_bp_pinned, cpu)))) < HBP_NUM
+ *
+ *       -> If there are already non-pinned counters in this cpu, it means
+ *          there is already a free slot for them.
+ *          Otherwise, we check that the maximum number of per task
+ *          breakpoints (for this cpu) plus the number of per cpu breakpoint
+ *          (for this cpu) doesn't cover every registers.
+ *
+ *   - If attached to every cpus, check:
+ *
+ *       (per_cpu(nr_bp_flexible, *) || (max(per_cpu(nr_cpu_bp_pinned, *))
+ *           + max(per_cpu(task_bp_pinned, *)))) < HBP_NUM
+ *
+ *       -> This is roughly the same, except we check the number of per cpu
+ *          bp for every cpu and we keep the max one. Same for the per tasks
+ *          breakpoints.
+ *
+ *
+ * == Pinned counter ==
+ *
+ *   - If attached to a single cpu, check:
+ *
+ *       ((per_cpu(nr_bp_flexible, cpu) > 1) + per_cpu(nr_cpu_bp_pinned, cpu)
+ *            + max(per_cpu(task_bp_pinned, cpu))) < HBP_NUM
+ *
+ *       -> Same checks as before. But now the nr_bp_flexible, if any, must keep
+ *          one register at least (or they will never be fed).
+ *
+ *   - If attached to every cpus, check:
+ *
+ *       ((per_cpu(nr_bp_flexible, *) > 1) + max(per_cpu(nr_cpu_bp_pinned, *))
+ *            + max(per_cpu(task_bp_pinned, *))) < HBP_NUM
+ */
+int reserve_bp_slot(struct perf_event *bp)
+{
+	struct bp_busy_slots slots = {0};
+	int ret = 0;
+
+	mutex_lock(&nr_bp_mutex);
+
+	fetch_bp_busy_slots(&slots, bp->cpu);
+
+	/* Flexible counters need to keep at least one slot */
+	if (slots.pinned + (!!slots.flexible) == HBP_NUM) {
+		ret = -ENOSPC;
+		goto end;
+	}
+
+	toggle_bp_slot(bp, true);
+
+end:
+	mutex_unlock(&nr_bp_mutex);
+
+	return ret;
+}
+
+void release_bp_slot(struct perf_event *bp)
+{
+	mutex_lock(&nr_bp_mutex);
+
+	toggle_bp_slot(bp, false);
+
+	mutex_unlock(&nr_bp_mutex);
+}
+
+
+int __register_perf_hw_breakpoint(struct perf_event *bp)
+{
+	int ret;
+
+	ret = reserve_bp_slot(bp);
+	if (ret)
+		return ret;
+
+	/*
+	 * Ptrace breakpoints can be temporary perf events only
+	 * meant to reserve a slot. In this case, it is created disabled and
+	 * we don't want to check the params right now (as we put a null addr)
+	 * But perf tools create events as disabled and we want to check
+	 * the params for them.
+	 * This is a quick hack that will be removed soon, once we remove
+	 * the tmp breakpoints from ptrace
+	 */
+	if (!bp->attr.disabled || bp->callback == perf_bp_event)
+		ret = arch_validate_hwbkpt_settings(bp, bp->ctx->task);
+
+	return ret;
+}
+
+int register_perf_hw_breakpoint(struct perf_event *bp)
+{
+	bp->callback = perf_bp_event;
+
+	return __register_perf_hw_breakpoint(bp);
+}
+
+/**
+ * register_user_hw_breakpoint - register a hardware breakpoint for user space
+ * @attr: breakpoint attributes
+ * @triggered: callback to trigger when we hit the breakpoint
+ * @tsk: pointer to 'task_struct' of the process to which the address belongs
+ */
+struct perf_event *
+register_user_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_callback_t triggered,
+			    struct task_struct *tsk)
+{
+	return perf_event_create_kernel_counter(attr, -1, tsk->pid, triggered);
+}
+EXPORT_SYMBOL_GPL(register_user_hw_breakpoint);
+
+/**
+ * modify_user_hw_breakpoint - modify a user-space hardware breakpoint
+ * @bp: the breakpoint structure to modify
+ * @attr: new breakpoint attributes
+ * @triggered: callback to trigger when we hit the breakpoint
+ * @tsk: pointer to 'task_struct' of the process to which the address belongs
+ */
+struct perf_event *
+modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr,
+			  perf_callback_t triggered,
+			  struct task_struct *tsk)
+{
+	/*
+	 * FIXME: do it without unregistering
+	 * - We don't want to lose our slot
+	 * - If the new bp is incorrect, don't lose the older one
+	 */
+	unregister_hw_breakpoint(bp);
+
+	return perf_event_create_kernel_counter(attr, -1, tsk->pid, triggered);
+}
+EXPORT_SYMBOL_GPL(modify_user_hw_breakpoint);
+
+/**
+ * unregister_hw_breakpoint - unregister a user-space hardware breakpoint
+ * @bp: the breakpoint structure to unregister
+ */
+void unregister_hw_breakpoint(struct perf_event *bp)
+{
+	if (!bp)
+		return;
+	perf_event_release_kernel(bp);
+}
+EXPORT_SYMBOL_GPL(unregister_hw_breakpoint);
+
+/**
+ * register_wide_hw_breakpoint - register a wide breakpoint in the kernel
+ * @attr: breakpoint attributes
+ * @triggered: callback to trigger when we hit the breakpoint
+ *
+ * @return a set of per_cpu pointers to perf events
+ */
+struct perf_event **
+register_wide_hw_breakpoint(struct perf_event_attr *attr,
+			    perf_callback_t triggered)
+{
+	struct perf_event **cpu_events, **pevent, *bp;
+	long err;
+	int cpu;
+
+	cpu_events = alloc_percpu(typeof(*cpu_events));
+	if (!cpu_events)
+		return ERR_PTR(-ENOMEM);
+
+	for_each_possible_cpu(cpu) {
+		pevent = per_cpu_ptr(cpu_events, cpu);
+		bp = perf_event_create_kernel_counter(attr, cpu, -1, triggered);
+
+		*pevent = bp;
+
+		if (IS_ERR(bp)) {
+			err = PTR_ERR(bp);
+			goto fail;
+		}
+	}
+
+	return cpu_events;
+
+fail:
+	for_each_possible_cpu(cpu) {
+		pevent = per_cpu_ptr(cpu_events, cpu);
+		if (IS_ERR(*pevent))
+			break;
+		unregister_hw_breakpoint(*pevent);
+	}
+	free_percpu(cpu_events);
+	/* return the error if any */
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(register_wide_hw_breakpoint);
+
+/**
+ * unregister_wide_hw_breakpoint - unregister a wide breakpoint in the kernel
+ * @cpu_events: the per cpu set of events to unregister
+ */
+void unregister_wide_hw_breakpoint(struct perf_event **cpu_events)
+{
+	int cpu;
+	struct perf_event **pevent;
+
+	for_each_possible_cpu(cpu) {
+		pevent = per_cpu_ptr(cpu_events, cpu);
+		unregister_hw_breakpoint(*pevent);
+	}
+	free_percpu(cpu_events);
+}
+EXPORT_SYMBOL_GPL(unregister_wide_hw_breakpoint);
+
+static struct notifier_block hw_breakpoint_exceptions_nb = {
+	.notifier_call = hw_breakpoint_exceptions_notify,
+	/* we need to be notified first */
+	.priority = 0x7fffffff
+};
+
+static int __init init_hw_breakpoint(void)
+{
+	return register_die_notifier(&hw_breakpoint_exceptions_nb);
+}
+core_initcall(init_hw_breakpoint);
+
+
+struct pmu perf_ops_bp = {
+	.enable		= arch_install_hw_breakpoint,
+	.disable	= arch_uninstall_hw_breakpoint,
+	.read		= hw_breakpoint_pmu_read,
+	.unthrottle	= hw_breakpoint_pmu_unthrottle
+};
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index c166019..ba566c2 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -166,11 +166,11 @@
 EXPORT_SYMBOL(set_irq_data);
 
 /**
- *	set_irq_data - set irq type data for an irq
+ *	set_irq_msi - set MSI descriptor data for an irq
  *	@irq:	Interrupt number
  *	@entry:	Pointer to MSI descriptor data
  *
- *	Set the hardware irq controller data for an irq
+ *	Set the MSI descriptor entry for an irq
  */
 int set_irq_msi(unsigned int irq, struct msi_desc *entry)
 {
@@ -590,7 +590,7 @@
 }
 
 /**
- *	handle_percpu_IRQ - Per CPU local irq handler
+ *	handle_percpu_irq - Per CPU local irq handler
  *	@irq:	the interrupt number
  *	@desc:	the interrupt description structure for this irq
  *
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 692363d..0832145 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -136,7 +136,7 @@
 
 static int default_affinity_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, default_affinity_show, NULL);
+	return single_open(file, default_affinity_show, PDE(inode)->data);
 }
 
 static const struct file_operations default_affinity_proc_fops = {
@@ -148,18 +148,28 @@
 };
 #endif
 
-static int irq_spurious_read(char *page, char **start, off_t off,
-				  int count, int *eof, void *data)
+static int irq_spurious_proc_show(struct seq_file *m, void *v)
 {
-	struct irq_desc *desc = irq_to_desc((long) data);
-	return sprintf(page, "count %u\n"
-			     "unhandled %u\n"
-			     "last_unhandled %u ms\n",
-			desc->irq_count,
-			desc->irqs_unhandled,
-			jiffies_to_msecs(desc->last_unhandled));
+	struct irq_desc *desc = irq_to_desc((long) m->private);
+
+	seq_printf(m, "count %u\n" "unhandled %u\n" "last_unhandled %u ms\n",
+		   desc->irq_count, desc->irqs_unhandled,
+		   jiffies_to_msecs(desc->last_unhandled));
+	return 0;
 }
 
+static int irq_spurious_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, irq_spurious_proc_show, NULL);
+}
+
+static const struct file_operations irq_spurious_proc_fops = {
+	.open		= irq_spurious_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 #define MAX_NAMELEN 128
 
 static int name_unique(unsigned int irq, struct irqaction *new_action)
@@ -204,7 +214,6 @@
 void register_irq_proc(unsigned int irq, struct irq_desc *desc)
 {
 	char name [MAX_NAMELEN];
-	struct proc_dir_entry *entry;
 
 	if (!root_irq_dir || (desc->chip == &no_irq_chip) || desc->dir)
 		return;
@@ -214,6 +223,8 @@
 
 	/* create /proc/irq/1234 */
 	desc->dir = proc_mkdir(name, root_irq_dir);
+	if (!desc->dir)
+		return;
 
 #ifdef CONFIG_SMP
 	/* create /proc/irq/<irq>/smp_affinity */
@@ -221,11 +232,8 @@
 			 &irq_affinity_proc_fops, (void *)(long)irq);
 #endif
 
-	entry = create_proc_entry("spurious", 0444, desc->dir);
-	if (entry) {
-		entry->data = (void *)(long)irq;
-		entry->read_proc = irq_spurious_read;
-	}
+	proc_create_data("spurious", 0444, desc->dir,
+			 &irq_spurious_proc_fops, (void *)(long)irq);
 }
 
 #undef MAX_NAMELEN
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index bd7273e..22b0a6e 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -104,7 +104,7 @@
 	return ok;
 }
 
-static void poll_all_shared_irqs(void)
+static void poll_spurious_irqs(unsigned long dummy)
 {
 	struct irq_desc *desc;
 	int i;
@@ -125,23 +125,11 @@
 		try_one_irq(i, desc);
 		local_irq_enable();
 	}
-}
-
-static void poll_spurious_irqs(unsigned long dummy)
-{
-	poll_all_shared_irqs();
 
 	mod_timer(&poll_spurious_irq_timer,
 		  jiffies + POLL_SPURIOUS_IRQ_INTERVAL);
 }
 
-#ifdef CONFIG_DEBUG_SHIRQ
-void debug_poll_all_shared_irqs(void)
-{
-	poll_all_shared_irqs();
-}
-#endif
-
 /*
  * If 99,900 of the previous 100,000 interrupts have not been handled
  * then assume that the IRQ is stuck in some manner. Drop a diagnostic
diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 8b6b8b6..8e5288a 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -181,6 +181,7 @@
 	}
 	return module_kallsyms_lookup_name(name);
 }
+EXPORT_SYMBOL_GPL(kallsyms_lookup_name);
 
 int kallsyms_on_each_symbol(int (*fn)(void *, const char *, struct module *,
 				      unsigned long),
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 9147a31..7d70146 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -870,7 +870,7 @@
 
 	/*
 	 * All threads that don't have debuggerinfo should be
-	 * in __schedule() sleeping, since all other CPUs
+	 * in schedule() sleeping, since all other CPUs
 	 * are in kgdb_wait, and thus have debuggerinfo.
 	 */
 	if (local_debuggerinfo) {
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 9fcb53a..25b1031 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -80,16 +80,16 @@
 #define MAX_KMOD_CONCURRENT 50	/* Completely arbitrary value - KAO */
 	static int kmod_loop_msg;
 
-	ret = security_kernel_module_request();
-	if (ret)
-		return ret;
-
 	va_start(args, fmt);
 	ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);
 	va_end(args);
 	if (ret >= MODULE_NAME_LEN)
 		return -ENAMETOOLONG;
 
+	ret = security_kernel_module_request(module_name);
+	if (ret)
+		return ret;
+
 	/* If modprobe needs a service that is in a module, we get a recursive
 	 * loop.  Limit the number of running kmod threads to max_threads/2 or
 	 * MAX_KMOD_CONCURRENT, whichever is the smaller.  A cleaner method
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 5240d75..e5342a3 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -90,6 +90,9 @@
  */
 static struct kprobe_blackpoint kprobe_blacklist[] = {
 	{"preempt_schedule",},
+	{"native_get_debugreg",},
+	{"irq_entries_start",},
+	{"common_interrupt",},
 	{NULL}    /* Terminator */
 };
 
@@ -673,6 +676,40 @@
 	return (kprobe_opcode_t *)(((char *)addr) + p->offset);
 }
 
+/* Check passed kprobe is valid and return kprobe in kprobe_table. */
+static struct kprobe * __kprobes __get_valid_kprobe(struct kprobe *p)
+{
+	struct kprobe *old_p, *list_p;
+
+	old_p = get_kprobe(p->addr);
+	if (unlikely(!old_p))
+		return NULL;
+
+	if (p != old_p) {
+		list_for_each_entry_rcu(list_p, &old_p->list, list)
+			if (list_p == p)
+			/* kprobe p is a valid probe */
+				goto valid;
+		return NULL;
+	}
+valid:
+	return old_p;
+}
+
+/* Return error if the kprobe is being re-registered */
+static inline int check_kprobe_rereg(struct kprobe *p)
+{
+	int ret = 0;
+	struct kprobe *old_p;
+
+	mutex_lock(&kprobe_mutex);
+	old_p = __get_valid_kprobe(p);
+	if (old_p)
+		ret = -EINVAL;
+	mutex_unlock(&kprobe_mutex);
+	return ret;
+}
+
 int __kprobes register_kprobe(struct kprobe *p)
 {
 	int ret = 0;
@@ -685,6 +722,10 @@
 		return -EINVAL;
 	p->addr = addr;
 
+	ret = check_kprobe_rereg(p);
+	if (ret)
+		return ret;
+
 	preempt_disable();
 	if (!kernel_text_address((unsigned long) p->addr) ||
 	    in_kprobes_functions((unsigned long) p->addr)) {
@@ -754,26 +795,6 @@
 }
 EXPORT_SYMBOL_GPL(register_kprobe);
 
-/* Check passed kprobe is valid and return kprobe in kprobe_table. */
-static struct kprobe * __kprobes __get_valid_kprobe(struct kprobe *p)
-{
-	struct kprobe *old_p, *list_p;
-
-	old_p = get_kprobe(p->addr);
-	if (unlikely(!old_p))
-		return NULL;
-
-	if (p != old_p) {
-		list_for_each_entry_rcu(list_p, &old_p->list, list)
-			if (list_p == p)
-			/* kprobe p is a valid probe */
-				goto valid;
-		return NULL;
-	}
-valid:
-	return old_p;
-}
-
 /*
  * Unregister a kprobe without a scheduler synchronization.
  */
@@ -1014,9 +1035,9 @@
 	/* Pre-allocate memory for max kretprobe instances */
 	if (rp->maxactive <= 0) {
 #ifdef CONFIG_PREEMPT
-		rp->maxactive = max(10, 2 * NR_CPUS);
+		rp->maxactive = max(10, 2 * num_possible_cpus());
 #else
-		rp->maxactive = NR_CPUS;
+		rp->maxactive = num_possible_cpus();
 #endif
 	}
 	spin_lock_init(&rp->lock);
@@ -1141,6 +1162,13 @@
 	arch_remove_kprobe(p);
 }
 
+void __kprobes dump_kprobe(struct kprobe *kp)
+{
+	printk(KERN_WARNING "Dumping kprobe:\n");
+	printk(KERN_WARNING "Name: %s\nAddress: %p\nOffset: %x\n",
+	       kp->symbol_name, kp->addr, kp->offset);
+}
+
 /* Module notifier call back, checking kprobes on the module */
 static int __kprobes kprobes_module_callback(struct notifier_block *nb,
 					     unsigned long val, void *data)
diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 9af5672..f5dcd36 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -49,7 +49,7 @@
 #include "lockdep_internals.h"
 
 #define CREATE_TRACE_POINTS
-#include <trace/events/lockdep.h>
+#include <trace/events/lock.h>
 
 #ifdef CONFIG_PROVE_LOCKING
 int prove_locking = 1;
diff --git a/kernel/module.c b/kernel/module.c
index 8b7d880..5842a71 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1187,7 +1187,8 @@
 
 	/* Count loaded sections and allocate structures */
 	for (i = 0; i < nsect; i++)
-		if (sechdrs[i].sh_flags & SHF_ALLOC)
+		if (sechdrs[i].sh_flags & SHF_ALLOC
+		    && sechdrs[i].sh_size)
 			nloaded++;
 	size[0] = ALIGN(sizeof(*sect_attrs)
 			+ nloaded * sizeof(sect_attrs->attrs[0]),
@@ -1207,6 +1208,8 @@
 	for (i = 0; i < nsect; i++) {
 		if (! (sechdrs[i].sh_flags & SHF_ALLOC))
 			continue;
+		if (!sechdrs[i].sh_size)
+			continue;
 		sattr->address = sechdrs[i].sh_addr;
 		sattr->name = kstrdup(secstrings + sechdrs[i].sh_name,
 					GFP_KERNEL);
diff --git a/kernel/mutex.c b/kernel/mutex.c
index 947b3ad..632f04c 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -148,8 +148,8 @@
 
 	preempt_disable();
 	mutex_acquire(&lock->dep_map, subclass, 0, ip);
-#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES) && \
-    !defined(CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES)
+
+#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
 	/*
 	 * Optimistic spinning.
 	 *
diff --git a/kernel/notifier.c b/kernel/notifier.c
index 61d5aa5..acd24e7 100644
--- a/kernel/notifier.c
+++ b/kernel/notifier.c
@@ -558,7 +558,7 @@
 
 static ATOMIC_NOTIFIER_HEAD(die_chain);
 
-int notrace notify_die(enum die_val val, const char *str,
+int notrace __kprobes notify_die(enum die_val val, const char *str,
 	       struct pt_regs *regs, long err, int trap, int sig)
 {
 	struct die_args args = {
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 7f29643..6b7ddba 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -28,6 +28,8 @@
 #include <linux/anon_inodes.h>
 #include <linux/kernel_stat.h>
 #include <linux/perf_event.h>
+#include <linux/ftrace_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/irq_regs.h>
 
@@ -244,6 +246,49 @@
 	put_ctx(ctx);
 }
 
+static inline u64 perf_clock(void)
+{
+	return cpu_clock(smp_processor_id());
+}
+
+/*
+ * Update the record of the current time in a context.
+ */
+static void update_context_time(struct perf_event_context *ctx)
+{
+	u64 now = perf_clock();
+
+	ctx->time += now - ctx->timestamp;
+	ctx->timestamp = now;
+}
+
+/*
+ * Update the total_time_enabled and total_time_running fields for a event.
+ */
+static void update_event_times(struct perf_event *event)
+{
+	struct perf_event_context *ctx = event->ctx;
+	u64 run_end;
+
+	if (event->state < PERF_EVENT_STATE_INACTIVE ||
+	    event->group_leader->state < PERF_EVENT_STATE_INACTIVE)
+		return;
+
+	if (ctx->is_active)
+		run_end = ctx->time;
+	else
+		run_end = event->tstamp_stopped;
+
+	event->total_time_enabled = run_end - event->tstamp_enabled;
+
+	if (event->state == PERF_EVENT_STATE_INACTIVE)
+		run_end = event->tstamp_stopped;
+	else
+		run_end = ctx->time;
+
+	event->total_time_running = run_end - event->tstamp_running;
+}
+
 /*
  * Add a event from the lists for its context.
  * Must be called with ctx->mutex and ctx->lock held.
@@ -292,6 +337,18 @@
 	if (event->group_leader != event)
 		event->group_leader->nr_siblings--;
 
+	update_event_times(event);
+
+	/*
+	 * If event was in error state, then keep it
+	 * that way, otherwise bogus counts will be
+	 * returned on read(). The only way to get out
+	 * of error state is by explicit re-enabling
+	 * of the event
+	 */
+	if (event->state > PERF_EVENT_STATE_OFF)
+		event->state = PERF_EVENT_STATE_OFF;
+
 	/*
 	 * If this was a group event with sibling events then
 	 * upgrade the siblings to singleton events by adding them
@@ -445,50 +502,11 @@
 	 * can remove the event safely, if the call above did not
 	 * succeed.
 	 */
-	if (!list_empty(&event->group_entry)) {
+	if (!list_empty(&event->group_entry))
 		list_del_event(event, ctx);
-	}
 	spin_unlock_irq(&ctx->lock);
 }
 
-static inline u64 perf_clock(void)
-{
-	return cpu_clock(smp_processor_id());
-}
-
-/*
- * Update the record of the current time in a context.
- */
-static void update_context_time(struct perf_event_context *ctx)
-{
-	u64 now = perf_clock();
-
-	ctx->time += now - ctx->timestamp;
-	ctx->timestamp = now;
-}
-
-/*
- * Update the total_time_enabled and total_time_running fields for a event.
- */
-static void update_event_times(struct perf_event *event)
-{
-	struct perf_event_context *ctx = event->ctx;
-	u64 run_end;
-
-	if (event->state < PERF_EVENT_STATE_INACTIVE ||
-	    event->group_leader->state < PERF_EVENT_STATE_INACTIVE)
-		return;
-
-	event->total_time_enabled = ctx->time - event->tstamp_enabled;
-
-	if (event->state == PERF_EVENT_STATE_INACTIVE)
-		run_end = event->tstamp_stopped;
-	else
-		run_end = ctx->time;
-
-	event->total_time_running = run_end - event->tstamp_running;
-}
-
 /*
  * Update total_time_enabled and total_time_running for all events in a group.
  */
@@ -1031,10 +1049,10 @@
 	update_context_time(ctx);
 
 	perf_disable();
-	if (ctx->nr_active)
+	if (ctx->nr_active) {
 		list_for_each_entry(event, &ctx->group_list, group_entry)
 			group_sched_out(event, cpuctx, ctx);
-
+	}
 	perf_enable();
  out:
 	spin_unlock(&ctx->lock);
@@ -1059,8 +1077,6 @@
 		&& !ctx1->pin_count && !ctx2->pin_count;
 }
 
-static void __perf_event_read(void *event);
-
 static void __perf_event_sync_stat(struct perf_event *event,
 				     struct perf_event *next_event)
 {
@@ -1078,8 +1094,8 @@
 	 */
 	switch (event->state) {
 	case PERF_EVENT_STATE_ACTIVE:
-		__perf_event_read(event);
-		break;
+		event->pmu->read(event);
+		/* fall-through */
 
 	case PERF_EVENT_STATE_INACTIVE:
 		update_event_times(event);
@@ -1118,6 +1134,8 @@
 	if (!ctx->nr_stat)
 		return;
 
+	update_context_time(ctx);
+
 	event = list_first_entry(&ctx->event_list,
 				   struct perf_event, event_entry);
 
@@ -1161,8 +1179,6 @@
 	if (likely(!ctx || !cpuctx->task_ctx))
 		return;
 
-	update_context_time(ctx);
-
 	rcu_read_lock();
 	parent = rcu_dereference(ctx->parent_ctx);
 	next_ctx = next->perf_event_ctxp;
@@ -1515,7 +1531,6 @@
 	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
 	struct perf_event *event = info;
 	struct perf_event_context *ctx = event->ctx;
-	unsigned long flags;
 
 	/*
 	 * If this is a task context, we need to check whether it is
@@ -1527,12 +1542,12 @@
 	if (ctx->task && cpuctx->task_ctx != ctx)
 		return;
 
-	local_irq_save(flags);
-	if (ctx->is_active)
-		update_context_time(ctx);
-	event->pmu->read(event);
+	spin_lock(&ctx->lock);
+	update_context_time(ctx);
 	update_event_times(event);
-	local_irq_restore(flags);
+	spin_unlock(&ctx->lock);
+
+	event->pmu->read(event);
 }
 
 static u64 perf_event_read(struct perf_event *event)
@@ -1545,7 +1560,13 @@
 		smp_call_function_single(event->oncpu,
 					 __perf_event_read, event, 1);
 	} else if (event->state == PERF_EVENT_STATE_INACTIVE) {
+		struct perf_event_context *ctx = event->ctx;
+		unsigned long flags;
+
+		spin_lock_irqsave(&ctx->lock, flags);
+		update_context_time(ctx);
 		update_event_times(event);
+		spin_unlock_irqrestore(&ctx->lock, flags);
 	}
 
 	return atomic64_read(&event->count);
@@ -1658,6 +1679,8 @@
 	return ERR_PTR(err);
 }
 
+static void perf_event_free_filter(struct perf_event *event);
+
 static void free_event_rcu(struct rcu_head *head)
 {
 	struct perf_event *event;
@@ -1665,6 +1688,7 @@
 	event = container_of(head, struct perf_event, rcu_head);
 	if (event->ns)
 		put_pid_ns(event->ns);
+	perf_event_free_filter(event);
 	kfree(event);
 }
 
@@ -1696,16 +1720,10 @@
 	call_rcu(&event->rcu_head, free_event_rcu);
 }
 
-/*
- * Called when the last reference to the file is gone.
- */
-static int perf_release(struct inode *inode, struct file *file)
+int perf_event_release_kernel(struct perf_event *event)
 {
-	struct perf_event *event = file->private_data;
 	struct perf_event_context *ctx = event->ctx;
 
-	file->private_data = NULL;
-
 	WARN_ON_ONCE(ctx->parent_ctx);
 	mutex_lock(&ctx->mutex);
 	perf_event_remove_from_context(event);
@@ -1720,6 +1738,19 @@
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(perf_event_release_kernel);
+
+/*
+ * Called when the last reference to the file is gone.
+ */
+static int perf_release(struct inode *inode, struct file *file)
+{
+	struct perf_event *event = file->private_data;
+
+	file->private_data = NULL;
+
+	return perf_event_release_kernel(event);
+}
 
 static int perf_event_read_size(struct perf_event *event)
 {
@@ -1746,91 +1777,94 @@
 	return size;
 }
 
-static u64 perf_event_read_value(struct perf_event *event)
+u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
 {
 	struct perf_event *child;
 	u64 total = 0;
 
+	*enabled = 0;
+	*running = 0;
+
+	mutex_lock(&event->child_mutex);
 	total += perf_event_read(event);
-	list_for_each_entry(child, &event->child_list, child_list)
+	*enabled += event->total_time_enabled +
+			atomic64_read(&event->child_total_time_enabled);
+	*running += event->total_time_running +
+			atomic64_read(&event->child_total_time_running);
+
+	list_for_each_entry(child, &event->child_list, child_list) {
 		total += perf_event_read(child);
+		*enabled += child->total_time_enabled;
+		*running += child->total_time_running;
+	}
+	mutex_unlock(&event->child_mutex);
 
 	return total;
 }
-
-static int perf_event_read_entry(struct perf_event *event,
-				   u64 read_format, char __user *buf)
-{
-	int n = 0, count = 0;
-	u64 values[2];
-
-	values[n++] = perf_event_read_value(event);
-	if (read_format & PERF_FORMAT_ID)
-		values[n++] = primary_event_id(event);
-
-	count = n * sizeof(u64);
-
-	if (copy_to_user(buf, values, count))
-		return -EFAULT;
-
-	return count;
-}
+EXPORT_SYMBOL_GPL(perf_event_read_value);
 
 static int perf_event_read_group(struct perf_event *event,
 				   u64 read_format, char __user *buf)
 {
 	struct perf_event *leader = event->group_leader, *sub;
-	int n = 0, size = 0, err = -EFAULT;
-	u64 values[3];
+	int n = 0, size = 0, ret = -EFAULT;
+	struct perf_event_context *ctx = leader->ctx;
+	u64 values[5];
+	u64 count, enabled, running;
+
+	mutex_lock(&ctx->mutex);
+	count = perf_event_read_value(leader, &enabled, &running);
 
 	values[n++] = 1 + leader->nr_siblings;
-	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
-		values[n++] = leader->total_time_enabled +
-			atomic64_read(&leader->child_total_time_enabled);
-	}
-	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
-		values[n++] = leader->total_time_running +
-			atomic64_read(&leader->child_total_time_running);
-	}
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+		values[n++] = enabled;
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+		values[n++] = running;
+	values[n++] = count;
+	if (read_format & PERF_FORMAT_ID)
+		values[n++] = primary_event_id(leader);
 
 	size = n * sizeof(u64);
 
 	if (copy_to_user(buf, values, size))
-		return -EFAULT;
+		goto unlock;
 
-	err = perf_event_read_entry(leader, read_format, buf + size);
-	if (err < 0)
-		return err;
-
-	size += err;
+	ret = size;
 
 	list_for_each_entry(sub, &leader->sibling_list, group_entry) {
-		err = perf_event_read_entry(sub, read_format,
-				buf + size);
-		if (err < 0)
-			return err;
+		n = 0;
 
-		size += err;
+		values[n++] = perf_event_read_value(sub, &enabled, &running);
+		if (read_format & PERF_FORMAT_ID)
+			values[n++] = primary_event_id(sub);
+
+		size = n * sizeof(u64);
+
+		if (copy_to_user(buf + ret, values, size)) {
+			ret = -EFAULT;
+			goto unlock;
+		}
+
+		ret += size;
 	}
+unlock:
+	mutex_unlock(&ctx->mutex);
 
-	return size;
+	return ret;
 }
 
 static int perf_event_read_one(struct perf_event *event,
 				 u64 read_format, char __user *buf)
 {
+	u64 enabled, running;
 	u64 values[4];
 	int n = 0;
 
-	values[n++] = perf_event_read_value(event);
-	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
-		values[n++] = event->total_time_enabled +
-			atomic64_read(&event->child_total_time_enabled);
-	}
-	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
-		values[n++] = event->total_time_running +
-			atomic64_read(&event->child_total_time_running);
-	}
+	values[n++] = perf_event_read_value(event, &enabled, &running);
+	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+		values[n++] = enabled;
+	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+		values[n++] = running;
 	if (read_format & PERF_FORMAT_ID)
 		values[n++] = primary_event_id(event);
 
@@ -1861,12 +1895,10 @@
 		return -ENOSPC;
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
-	mutex_lock(&event->child_mutex);
 	if (read_format & PERF_FORMAT_GROUP)
 		ret = perf_event_read_group(event, read_format, buf);
 	else
 		ret = perf_event_read_one(event, read_format, buf);
-	mutex_unlock(&event->child_mutex);
 
 	return ret;
 }
@@ -1974,7 +2006,8 @@
 	return ret;
 }
 
-int perf_event_set_output(struct perf_event *event, int output_fd);
+static int perf_event_set_output(struct perf_event *event, int output_fd);
+static int perf_event_set_filter(struct perf_event *event, void __user *arg);
 
 static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
@@ -2002,6 +2035,9 @@
 	case PERF_EVENT_IOC_SET_OUTPUT:
 		return perf_event_set_output(event, arg);
 
+	case PERF_EVENT_IOC_SET_FILTER:
+		return perf_event_set_filter(event, (void __user *)arg);
+
 	default:
 		return -ENOTTY;
 	}
@@ -2174,6 +2210,7 @@
 	perf_mmap_free_page((unsigned long)data->user_page);
 	for (i = 0; i < data->nr_pages; i++)
 		perf_mmap_free_page((unsigned long)data->data_pages[i]);
+	kfree(data);
 }
 
 #else
@@ -2214,6 +2251,7 @@
 		perf_mmap_unmark_page(base + (i * PAGE_SIZE));
 
 	vfree(base);
+	kfree(data);
 }
 
 static void perf_mmap_data_free(struct perf_mmap_data *data)
@@ -2307,7 +2345,7 @@
 	}
 
 	if (!data->watermark)
-		data->watermark = max_t(long, PAGE_SIZE, max_size / 2);
+		data->watermark = max_size / 2;
 
 
 	rcu_assign_pointer(event->data, data);
@@ -2319,7 +2357,6 @@
 
 	data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
 	perf_mmap_data_free(data);
-	kfree(data);
 }
 
 static void perf_mmap_data_release(struct perf_event *event)
@@ -2666,20 +2703,21 @@
 static void perf_output_lock(struct perf_output_handle *handle)
 {
 	struct perf_mmap_data *data = handle->data;
-	int cpu;
+	int cur, cpu = get_cpu();
 
 	handle->locked = 0;
 
-	local_irq_save(handle->flags);
-	cpu = smp_processor_id();
+	for (;;) {
+		cur = atomic_cmpxchg(&data->lock, -1, cpu);
+		if (cur == -1) {
+			handle->locked = 1;
+			break;
+		}
+		if (cur == cpu)
+			break;
 
-	if (in_nmi() && atomic_read(&data->lock) == cpu)
-		return;
-
-	while (atomic_cmpxchg(&data->lock, -1, cpu) != -1)
 		cpu_relax();
-
-	handle->locked = 1;
+	}
 }
 
 static void perf_output_unlock(struct perf_output_handle *handle)
@@ -2725,7 +2763,7 @@
 	if (atomic_xchg(&data->wakeup, 0))
 		perf_output_wakeup(handle);
 out:
-	local_irq_restore(handle->flags);
+	put_cpu();
 }
 
 void perf_output_copy(struct perf_output_handle *handle,
@@ -3236,15 +3274,10 @@
 {
 	struct perf_event *event;
 
-	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
-		return;
-
-	rcu_read_lock();
 	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
 		if (perf_event_task_match(event))
 			perf_event_task_output(event, task_event);
 	}
-	rcu_read_unlock();
 }
 
 static void perf_event_task_event(struct perf_task_event *task_event)
@@ -3252,11 +3285,11 @@
 	struct perf_cpu_context *cpuctx;
 	struct perf_event_context *ctx = task_event->task_ctx;
 
+	rcu_read_lock();
 	cpuctx = &get_cpu_var(perf_cpu_context);
 	perf_event_task_ctx(&cpuctx->ctx, task_event);
 	put_cpu_var(perf_cpu_context);
 
-	rcu_read_lock();
 	if (!ctx)
 		ctx = rcu_dereference(task_event->task->perf_event_ctxp);
 	if (ctx)
@@ -3348,15 +3381,10 @@
 {
 	struct perf_event *event;
 
-	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
-		return;
-
-	rcu_read_lock();
 	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
 		if (perf_event_comm_match(event))
 			perf_event_comm_output(event, comm_event);
 	}
-	rcu_read_unlock();
 }
 
 static void perf_event_comm_event(struct perf_comm_event *comm_event)
@@ -3367,7 +3395,7 @@
 	char comm[TASK_COMM_LEN];
 
 	memset(comm, 0, sizeof(comm));
-	strncpy(comm, comm_event->task->comm, sizeof(comm));
+	strlcpy(comm, comm_event->task->comm, sizeof(comm));
 	size = ALIGN(strlen(comm)+1, sizeof(u64));
 
 	comm_event->comm = comm;
@@ -3375,11 +3403,11 @@
 
 	comm_event->event_id.header.size = sizeof(comm_event->event_id) + size;
 
+	rcu_read_lock();
 	cpuctx = &get_cpu_var(perf_cpu_context);
 	perf_event_comm_ctx(&cpuctx->ctx, comm_event);
 	put_cpu_var(perf_cpu_context);
 
-	rcu_read_lock();
 	/*
 	 * doesn't really matter which of the child contexts the
 	 * events ends up in.
@@ -3472,15 +3500,10 @@
 {
 	struct perf_event *event;
 
-	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
-		return;
-
-	rcu_read_lock();
 	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
 		if (perf_event_mmap_match(event, mmap_event))
 			perf_event_mmap_output(event, mmap_event);
 	}
-	rcu_read_unlock();
 }
 
 static void perf_event_mmap_event(struct perf_mmap_event *mmap_event)
@@ -3536,11 +3559,11 @@
 
 	mmap_event->event_id.header.size = sizeof(mmap_event->event_id) + size;
 
+	rcu_read_lock();
 	cpuctx = &get_cpu_var(perf_cpu_context);
 	perf_event_mmap_ctx(&cpuctx->ctx, mmap_event);
 	put_cpu_var(perf_cpu_context);
 
-	rcu_read_lock();
 	/*
 	 * doesn't really matter which of the child contexts the
 	 * events ends up in.
@@ -3679,7 +3702,11 @@
 			perf_event_disable(event);
 	}
 
-	perf_event_output(event, nmi, data, regs);
+	if (event->overflow_handler)
+		event->overflow_handler(event, nmi, data, regs);
+	else
+		perf_event_output(event, nmi, data, regs);
+
 	return ret;
 }
 
@@ -3724,16 +3751,16 @@
 	return nr;
 }
 
-static void perf_swevent_overflow(struct perf_event *event,
+static void perf_swevent_overflow(struct perf_event *event, u64 overflow,
 				    int nmi, struct perf_sample_data *data,
 				    struct pt_regs *regs)
 {
 	struct hw_perf_event *hwc = &event->hw;
 	int throttle = 0;
-	u64 overflow;
 
 	data->period = event->hw.last_period;
-	overflow = perf_swevent_set_period(event);
+	if (!overflow)
+		overflow = perf_swevent_set_period(event);
 
 	if (hwc->interrupts == MAX_INTERRUPTS)
 		return;
@@ -3766,14 +3793,19 @@
 
 	atomic64_add(nr, &event->count);
 
-	if (!hwc->sample_period)
-		return;
-
 	if (!regs)
 		return;
 
-	if (!atomic64_add_negative(nr, &hwc->period_left))
-		perf_swevent_overflow(event, nmi, data, regs);
+	if (!hwc->sample_period)
+		return;
+
+	if (nr == 1 && hwc->sample_period == 1 && !event->attr.freq)
+		return perf_swevent_overflow(event, 1, nmi, data, regs);
+
+	if (atomic64_add_negative(nr, &hwc->period_left))
+		return;
+
+	perf_swevent_overflow(event, 0, nmi, data, regs);
 }
 
 static int perf_swevent_is_counting(struct perf_event *event)
@@ -3806,25 +3838,44 @@
 	return 1;
 }
 
+static int perf_tp_event_match(struct perf_event *event,
+				struct perf_sample_data *data);
+
+static int perf_exclude_event(struct perf_event *event,
+			      struct pt_regs *regs)
+{
+	if (regs) {
+		if (event->attr.exclude_user && user_mode(regs))
+			return 1;
+
+		if (event->attr.exclude_kernel && !user_mode(regs))
+			return 1;
+	}
+
+	return 0;
+}
+
 static int perf_swevent_match(struct perf_event *event,
 				enum perf_type_id type,
-				u32 event_id, struct pt_regs *regs)
+				u32 event_id,
+				struct perf_sample_data *data,
+				struct pt_regs *regs)
 {
 	if (!perf_swevent_is_counting(event))
 		return 0;
 
 	if (event->attr.type != type)
 		return 0;
+
 	if (event->attr.config != event_id)
 		return 0;
 
-	if (regs) {
-		if (event->attr.exclude_user && user_mode(regs))
-			return 0;
+	if (perf_exclude_event(event, regs))
+		return 0;
 
-		if (event->attr.exclude_kernel && !user_mode(regs))
-			return 0;
-	}
+	if (event->attr.type == PERF_TYPE_TRACEPOINT &&
+	    !perf_tp_event_match(event, data))
+		return 0;
 
 	return 1;
 }
@@ -3837,49 +3888,59 @@
 {
 	struct perf_event *event;
 
-	if (system_state != SYSTEM_RUNNING || list_empty(&ctx->event_list))
-		return;
-
-	rcu_read_lock();
 	list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
-		if (perf_swevent_match(event, type, event_id, regs))
+		if (perf_swevent_match(event, type, event_id, data, regs))
 			perf_swevent_add(event, nr, nmi, data, regs);
 	}
-	rcu_read_unlock();
 }
 
-static int *perf_swevent_recursion_context(struct perf_cpu_context *cpuctx)
+int perf_swevent_get_recursion_context(void)
 {
+	struct perf_cpu_context *cpuctx = &get_cpu_var(perf_cpu_context);
+	int rctx;
+
 	if (in_nmi())
-		return &cpuctx->recursion[3];
+		rctx = 3;
+	else if (in_irq())
+		rctx = 2;
+	else if (in_softirq())
+		rctx = 1;
+	else
+		rctx = 0;
 
-	if (in_irq())
-		return &cpuctx->recursion[2];
+	if (cpuctx->recursion[rctx]) {
+		put_cpu_var(perf_cpu_context);
+		return -1;
+	}
 
-	if (in_softirq())
-		return &cpuctx->recursion[1];
+	cpuctx->recursion[rctx]++;
+	barrier();
 
-	return &cpuctx->recursion[0];
+	return rctx;
 }
+EXPORT_SYMBOL_GPL(perf_swevent_get_recursion_context);
+
+void perf_swevent_put_recursion_context(int rctx)
+{
+	struct perf_cpu_context *cpuctx = &__get_cpu_var(perf_cpu_context);
+	barrier();
+	cpuctx->recursion[rctx]--;
+	put_cpu_var(perf_cpu_context);
+}
+EXPORT_SYMBOL_GPL(perf_swevent_put_recursion_context);
 
 static void do_perf_sw_event(enum perf_type_id type, u32 event_id,
 				    u64 nr, int nmi,
 				    struct perf_sample_data *data,
 				    struct pt_regs *regs)
 {
-	struct perf_cpu_context *cpuctx = &get_cpu_var(perf_cpu_context);
-	int *recursion = perf_swevent_recursion_context(cpuctx);
+	struct perf_cpu_context *cpuctx;
 	struct perf_event_context *ctx;
 
-	if (*recursion)
-		goto out;
-
-	(*recursion)++;
-	barrier();
-
+	cpuctx = &__get_cpu_var(perf_cpu_context);
+	rcu_read_lock();
 	perf_swevent_ctx_event(&cpuctx->ctx, type, event_id,
 				 nr, nmi, data, regs);
-	rcu_read_lock();
 	/*
 	 * doesn't really matter which of the child contexts the
 	 * events ends up in.
@@ -3888,23 +3949,24 @@
 	if (ctx)
 		perf_swevent_ctx_event(ctx, type, event_id, nr, nmi, data, regs);
 	rcu_read_unlock();
-
-	barrier();
-	(*recursion)--;
-
-out:
-	put_cpu_var(perf_cpu_context);
 }
 
 void __perf_sw_event(u32 event_id, u64 nr, int nmi,
 			    struct pt_regs *regs, u64 addr)
 {
-	struct perf_sample_data data = {
-		.addr = addr,
-	};
+	struct perf_sample_data data;
+	int rctx;
 
-	do_perf_sw_event(PERF_TYPE_SOFTWARE, event_id, nr, nmi,
-				&data, regs);
+	rctx = perf_swevent_get_recursion_context();
+	if (rctx < 0)
+		return;
+
+	data.addr = addr;
+	data.raw  = NULL;
+
+	do_perf_sw_event(PERF_TYPE_SOFTWARE, event_id, nr, nmi, &data, regs);
+
+	perf_swevent_put_recursion_context(rctx);
 }
 
 static void perf_swevent_read(struct perf_event *event)
@@ -3949,6 +4011,7 @@
 	event->pmu->read(event);
 
 	data.addr = 0;
+	data.period = event->hw.last_period;
 	regs = get_irq_regs();
 	/*
 	 * In case we exclude kernel IPs or are somehow not in interrupt
@@ -4108,6 +4171,7 @@
 };
 
 #ifdef CONFIG_EVENT_PROFILE
+
 void perf_tp_event(int event_id, u64 addr, u64 count, void *record,
 			  int entry_size)
 {
@@ -4126,13 +4190,21 @@
 	if (!regs)
 		regs = task_pt_regs(current);
 
+	/* Trace events already protected against recursion */
 	do_perf_sw_event(PERF_TYPE_TRACEPOINT, event_id, count, 1,
 				&data, regs);
 }
 EXPORT_SYMBOL_GPL(perf_tp_event);
 
-extern int ftrace_profile_enable(int);
-extern void ftrace_profile_disable(int);
+static int perf_tp_event_match(struct perf_event *event,
+				struct perf_sample_data *data)
+{
+	void *record = data->raw->data;
+
+	if (likely(!event->filter) || filter_match_preds(event->filter, record))
+		return 1;
+	return 0;
+}
 
 static void tp_perf_event_destroy(struct perf_event *event)
 {
@@ -4157,11 +4229,99 @@
 
 	return &perf_ops_generic;
 }
+
+static int perf_event_set_filter(struct perf_event *event, void __user *arg)
+{
+	char *filter_str;
+	int ret;
+
+	if (event->attr.type != PERF_TYPE_TRACEPOINT)
+		return -EINVAL;
+
+	filter_str = strndup_user(arg, PAGE_SIZE);
+	if (IS_ERR(filter_str))
+		return PTR_ERR(filter_str);
+
+	ret = ftrace_profile_set_filter(event, event->attr.config, filter_str);
+
+	kfree(filter_str);
+	return ret;
+}
+
+static void perf_event_free_filter(struct perf_event *event)
+{
+	ftrace_profile_free_filter(event);
+}
+
 #else
+
+static int perf_tp_event_match(struct perf_event *event,
+				struct perf_sample_data *data)
+{
+	return 1;
+}
+
 static const struct pmu *tp_perf_event_init(struct perf_event *event)
 {
 	return NULL;
 }
+
+static int perf_event_set_filter(struct perf_event *event, void __user *arg)
+{
+	return -ENOENT;
+}
+
+static void perf_event_free_filter(struct perf_event *event)
+{
+}
+
+#endif /* CONFIG_EVENT_PROFILE */
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+static void bp_perf_event_destroy(struct perf_event *event)
+{
+	release_bp_slot(event);
+}
+
+static const struct pmu *bp_perf_event_init(struct perf_event *bp)
+{
+	int err;
+	/*
+	 * The breakpoint is already filled if we haven't created the counter
+	 * through perf syscall
+	 * FIXME: manage to get trigerred to NULL if it comes from syscalls
+	 */
+	if (!bp->callback)
+		err = register_perf_hw_breakpoint(bp);
+	else
+		err = __register_perf_hw_breakpoint(bp);
+	if (err)
+		return ERR_PTR(err);
+
+	bp->destroy = bp_perf_event_destroy;
+
+	return &perf_ops_bp;
+}
+
+void perf_bp_event(struct perf_event *bp, void *data)
+{
+	struct perf_sample_data sample;
+	struct pt_regs *regs = data;
+
+	sample.addr = bp->attr.bp_addr;
+
+	if (!perf_exclude_event(bp, regs))
+		perf_swevent_add(bp, 1, 1, &sample, regs);
+}
+#else
+static const struct pmu *bp_perf_event_init(struct perf_event *bp)
+{
+	return NULL;
+}
+
+void perf_bp_event(struct perf_event *bp, void *regs)
+{
+}
 #endif
 
 atomic_t perf_swevent_enabled[PERF_COUNT_SW_MAX];
@@ -4208,6 +4368,8 @@
 	case PERF_COUNT_SW_PAGE_FAULTS_MAJ:
 	case PERF_COUNT_SW_CONTEXT_SWITCHES:
 	case PERF_COUNT_SW_CPU_MIGRATIONS:
+	case PERF_COUNT_SW_ALIGNMENT_FAULTS:
+	case PERF_COUNT_SW_EMULATION_FAULTS:
 		if (!event->parent) {
 			atomic_inc(&perf_swevent_enabled[event_id]);
 			event->destroy = sw_perf_event_destroy;
@@ -4228,6 +4390,7 @@
 		   struct perf_event_context *ctx,
 		   struct perf_event *group_leader,
 		   struct perf_event *parent_event,
+		   perf_callback_t callback,
 		   gfp_t gfpflags)
 {
 	const struct pmu *pmu;
@@ -4270,6 +4433,11 @@
 
 	event->state		= PERF_EVENT_STATE_INACTIVE;
 
+	if (!callback && parent_event)
+		callback = parent_event->callback;
+	
+	event->callback	= callback;
+
 	if (attr->disabled)
 		event->state = PERF_EVENT_STATE_OFF;
 
@@ -4304,6 +4472,11 @@
 		pmu = tp_perf_event_init(event);
 		break;
 
+	case PERF_TYPE_BREAKPOINT:
+		pmu = bp_perf_event_init(event);
+		break;
+
+
 	default:
 		break;
 	}
@@ -4416,7 +4589,7 @@
 	goto out;
 }
 
-int perf_event_set_output(struct perf_event *event, int output_fd)
+static int perf_event_set_output(struct perf_event *event, int output_fd)
 {
 	struct perf_event *output_event = NULL;
 	struct file *output_file = NULL;
@@ -4546,7 +4719,7 @@
 	}
 
 	event = perf_event_alloc(&attr, cpu, ctx, group_leader,
-				     NULL, GFP_KERNEL);
+				     NULL, NULL, GFP_KERNEL);
 	err = PTR_ERR(event);
 	if (IS_ERR(event))
 		goto err_put_context;
@@ -4594,6 +4767,60 @@
 	return err;
 }
 
+/**
+ * perf_event_create_kernel_counter
+ *
+ * @attr: attributes of the counter to create
+ * @cpu: cpu in which the counter is bound
+ * @pid: task to profile
+ */
+struct perf_event *
+perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
+				 pid_t pid, perf_callback_t callback)
+{
+	struct perf_event *event;
+	struct perf_event_context *ctx;
+	int err;
+
+	/*
+	 * Get the target context (task or percpu):
+	 */
+
+	ctx = find_get_context(pid, cpu);
+	if (IS_ERR(ctx)) {
+		err = PTR_ERR(ctx);
+		goto err_exit;
+	}
+
+	event = perf_event_alloc(attr, cpu, ctx, NULL,
+				     NULL, callback, GFP_KERNEL);
+	if (IS_ERR(event)) {
+		err = PTR_ERR(event);
+		goto err_put_context;
+	}
+
+	event->filp = NULL;
+	WARN_ON_ONCE(ctx->parent_ctx);
+	mutex_lock(&ctx->mutex);
+	perf_install_in_context(ctx, event, cpu);
+	++ctx->generation;
+	mutex_unlock(&ctx->mutex);
+
+	event->owner = current;
+	get_task_struct(current);
+	mutex_lock(&current->perf_event_mutex);
+	list_add_tail(&event->owner_entry, &current->perf_event_list);
+	mutex_unlock(&current->perf_event_mutex);
+
+	return event;
+
+ err_put_context:
+	put_ctx(ctx);
+ err_exit:
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(perf_event_create_kernel_counter);
+
 /*
  * inherit a event from parent task to child task:
  */
@@ -4619,7 +4846,7 @@
 	child_event = perf_event_alloc(&parent_event->attr,
 					   parent_event->cpu, child_ctx,
 					   group_leader, parent_event,
-					   GFP_KERNEL);
+					   NULL, GFP_KERNEL);
 	if (IS_ERR(child_event))
 		return child_event;
 	get_ctx(child_ctx);
@@ -4637,6 +4864,8 @@
 	if (parent_event->attr.freq)
 		child_event->hw.sample_period = parent_event->hw.sample_period;
 
+	child_event->overflow_handler = parent_event->overflow_handler;
+
 	/*
 	 * Link it up in the child's context:
 	 */
@@ -4726,7 +4955,6 @@
 {
 	struct perf_event *parent_event;
 
-	update_event_times(child_event);
 	perf_event_remove_from_context(child_event);
 
 	parent_event = child_event->parent;
@@ -4778,6 +5006,7 @@
 	 * the events from it.
 	 */
 	unclone_ctx(child_ctx);
+	update_context_time(child_ctx);
 	spin_unlock_irqrestore(&child_ctx->lock, flags);
 
 	/*
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index c3b81c3..4319181 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -8,7 +8,7 @@
 obj-$(CONFIG_FREEZER)		+= process.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
-obj-$(CONFIG_HIBERNATION)	+= swsusp.o hibernate.o snapshot.o swap.o user.o
+obj-$(CONFIG_HIBERNATION)	+= hibernate.o snapshot.o swap.o user.o
 obj-$(CONFIG_HIBERNATION_NVS)	+= hibernate_nvs.o
 
 obj-$(CONFIG_MAGIC_SYSRQ)	+= poweroff.o
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 04a9e90..bbfe472 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -32,6 +32,7 @@
 static char resume_file[256] = CONFIG_PM_STD_PARTITION;
 dev_t swsusp_resume_device;
 sector_t swsusp_resume_block;
+int in_suspend __nosavedata = 0;
 
 enum {
 	HIBERNATION_INVALID,
@@ -202,6 +203,35 @@
 }
 
 /**
+ *	swsusp_show_speed - print the time elapsed between two events.
+ *	@start: Starting event.
+ *	@stop: Final event.
+ *	@nr_pages -	number of pages processed between @start and @stop
+ *	@msg -		introductory message to print
+ */
+
+void swsusp_show_speed(struct timeval *start, struct timeval *stop,
+			unsigned nr_pages, char *msg)
+{
+	s64 elapsed_centisecs64;
+	int centisecs;
+	int k;
+	int kps;
+
+	elapsed_centisecs64 = timeval_to_ns(stop) - timeval_to_ns(start);
+	do_div(elapsed_centisecs64, NSEC_PER_SEC / 100);
+	centisecs = elapsed_centisecs64;
+	if (centisecs == 0)
+		centisecs = 1;	/* avoid div-by-zero */
+	k = nr_pages * (PAGE_SIZE / 1024);
+	kps = (k * 100) / centisecs;
+	printk(KERN_INFO "PM: %s %d kbytes in %d.%02d seconds (%d.%02d MB/s)\n",
+			msg, k,
+			centisecs / 100, centisecs % 100,
+			kps / 1000, (kps % 1000) / 10);
+}
+
+/**
  *	create_image - freeze devices that need to be frozen with interrupts
  *	off, create the hibernation image and thaw those devices.  Control
  *	reappears in this routine after a restore.
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 347d2cc..0998c71 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -220,6 +220,7 @@
 
 #ifdef CONFIG_PM_RUNTIME
 struct workqueue_struct *pm_wq;
+EXPORT_SYMBOL_GPL(pm_wq);
 
 static int __init pm_start_workqueue(void)
 {
diff --git a/kernel/power/process.c b/kernel/power/process.c
index cc2e553..5ade1bd 100644
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/syscalls.h>
 #include <linux/freezer.h>
+#include <linux/delay.h>
 
 /* 
  * Timeout for stopping processes
@@ -41,7 +42,7 @@
 	do_gettimeofday(&start);
 
 	end_time = jiffies + TIMEOUT;
-	do {
+	while (true) {
 		todo = 0;
 		read_lock(&tasklist_lock);
 		do_each_thread(g, p) {
@@ -62,10 +63,15 @@
 				todo++;
 		} while_each_thread(g, p);
 		read_unlock(&tasklist_lock);
-		yield();			/* Yield is okay here */
-		if (time_after(jiffies, end_time))
+		if (!todo || time_after(jiffies, end_time))
 			break;
-	} while (todo);
+
+		/*
+		 * We need to retry, but first give the freezing tasks some
+		 * time to enter the regrigerator.
+		 */
+		msleep(10);
+	}
 
 	do_gettimeofday(&end);
 	elapsed_csecs64 = timeval_to_ns(&end) - timeval_to_ns(&start);
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 890f6b1..09b2b0a 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -38,6 +38,107 @@
 
 static struct swsusp_header *swsusp_header;
 
+/**
+ *	The following functions are used for tracing the allocated
+ *	swap pages, so that they can be freed in case of an error.
+ */
+
+struct swsusp_extent {
+	struct rb_node node;
+	unsigned long start;
+	unsigned long end;
+};
+
+static struct rb_root swsusp_extents = RB_ROOT;
+
+static int swsusp_extents_insert(unsigned long swap_offset)
+{
+	struct rb_node **new = &(swsusp_extents.rb_node);
+	struct rb_node *parent = NULL;
+	struct swsusp_extent *ext;
+
+	/* Figure out where to put the new node */
+	while (*new) {
+		ext = container_of(*new, struct swsusp_extent, node);
+		parent = *new;
+		if (swap_offset < ext->start) {
+			/* Try to merge */
+			if (swap_offset == ext->start - 1) {
+				ext->start--;
+				return 0;
+			}
+			new = &((*new)->rb_left);
+		} else if (swap_offset > ext->end) {
+			/* Try to merge */
+			if (swap_offset == ext->end + 1) {
+				ext->end++;
+				return 0;
+			}
+			new = &((*new)->rb_right);
+		} else {
+			/* It already is in the tree */
+			return -EINVAL;
+		}
+	}
+	/* Add the new node and rebalance the tree. */
+	ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL);
+	if (!ext)
+		return -ENOMEM;
+
+	ext->start = swap_offset;
+	ext->end = swap_offset;
+	rb_link_node(&ext->node, parent, new);
+	rb_insert_color(&ext->node, &swsusp_extents);
+	return 0;
+}
+
+/**
+ *	alloc_swapdev_block - allocate a swap page and register that it has
+ *	been allocated, so that it can be freed in case of an error.
+ */
+
+sector_t alloc_swapdev_block(int swap)
+{
+	unsigned long offset;
+
+	offset = swp_offset(get_swap_page_of_type(swap));
+	if (offset) {
+		if (swsusp_extents_insert(offset))
+			swap_free(swp_entry(swap, offset));
+		else
+			return swapdev_block(swap, offset);
+	}
+	return 0;
+}
+
+/**
+ *	free_all_swap_pages - free swap pages allocated for saving image data.
+ *	It also frees the extents used to register which swap entres had been
+ *	allocated.
+ */
+
+void free_all_swap_pages(int swap)
+{
+	struct rb_node *node;
+
+	while ((node = swsusp_extents.rb_node)) {
+		struct swsusp_extent *ext;
+		unsigned long offset;
+
+		ext = container_of(node, struct swsusp_extent, node);
+		rb_erase(node, &swsusp_extents);
+		for (offset = ext->start; offset <= ext->end; offset++)
+			swap_free(swp_entry(swap, offset));
+
+		kfree(ext);
+	}
+}
+
+int swsusp_swap_in_use(void)
+{
+	return (swsusp_extents.rb_node != NULL);
+}
+
 /*
  * General things
  */
@@ -336,7 +437,7 @@
 		if (ret)
 			break;
 		if (!(nr_pages % m))
-			printk("\b\b\b\b%3d%%", nr_pages / m);
+			printk(KERN_CONT "\b\b\b\b%3d%%", nr_pages / m);
 		nr_pages++;
 	}
 	err2 = wait_on_bio_chain(&bio);
@@ -344,9 +445,9 @@
 	if (!ret)
 		ret = err2;
 	if (!ret)
-		printk("\b\b\b\bdone\n");
+		printk(KERN_CONT "\b\b\b\bdone\n");
 	else
-		printk("\n");
+		printk(KERN_CONT "\n");
 	swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
 	return ret;
 }
diff --git a/kernel/power/swsusp.c b/kernel/power/swsusp.c
index 6a07f4d..5b3601b 100644
--- a/kernel/power/swsusp.c
+++ b/kernel/power/swsusp.c
@@ -56,133 +56,3 @@
 #include "power.h"
 
 int in_suspend __nosavedata = 0;
-
-/**
- *	The following functions are used for tracing the allocated
- *	swap pages, so that they can be freed in case of an error.
- */
-
-struct swsusp_extent {
-	struct rb_node node;
-	unsigned long start;
-	unsigned long end;
-};
-
-static struct rb_root swsusp_extents = RB_ROOT;
-
-static int swsusp_extents_insert(unsigned long swap_offset)
-{
-	struct rb_node **new = &(swsusp_extents.rb_node);
-	struct rb_node *parent = NULL;
-	struct swsusp_extent *ext;
-
-	/* Figure out where to put the new node */
-	while (*new) {
-		ext = container_of(*new, struct swsusp_extent, node);
-		parent = *new;
-		if (swap_offset < ext->start) {
-			/* Try to merge */
-			if (swap_offset == ext->start - 1) {
-				ext->start--;
-				return 0;
-			}
-			new = &((*new)->rb_left);
-		} else if (swap_offset > ext->end) {
-			/* Try to merge */
-			if (swap_offset == ext->end + 1) {
-				ext->end++;
-				return 0;
-			}
-			new = &((*new)->rb_right);
-		} else {
-			/* It already is in the tree */
-			return -EINVAL;
-		}
-	}
-	/* Add the new node and rebalance the tree. */
-	ext = kzalloc(sizeof(struct swsusp_extent), GFP_KERNEL);
-	if (!ext)
-		return -ENOMEM;
-
-	ext->start = swap_offset;
-	ext->end = swap_offset;
-	rb_link_node(&ext->node, parent, new);
-	rb_insert_color(&ext->node, &swsusp_extents);
-	return 0;
-}
-
-/**
- *	alloc_swapdev_block - allocate a swap page and register that it has
- *	been allocated, so that it can be freed in case of an error.
- */
-
-sector_t alloc_swapdev_block(int swap)
-{
-	unsigned long offset;
-
-	offset = swp_offset(get_swap_page_of_type(swap));
-	if (offset) {
-		if (swsusp_extents_insert(offset))
-			swap_free(swp_entry(swap, offset));
-		else
-			return swapdev_block(swap, offset);
-	}
-	return 0;
-}
-
-/**
- *	free_all_swap_pages - free swap pages allocated for saving image data.
- *	It also frees the extents used to register which swap entres had been
- *	allocated.
- */
-
-void free_all_swap_pages(int swap)
-{
-	struct rb_node *node;
-
-	while ((node = swsusp_extents.rb_node)) {
-		struct swsusp_extent *ext;
-		unsigned long offset;
-
-		ext = container_of(node, struct swsusp_extent, node);
-		rb_erase(node, &swsusp_extents);
-		for (offset = ext->start; offset <= ext->end; offset++)
-			swap_free(swp_entry(swap, offset));
-
-		kfree(ext);
-	}
-}
-
-int swsusp_swap_in_use(void)
-{
-	return (swsusp_extents.rb_node != NULL);
-}
-
-/**
- *	swsusp_show_speed - print the time elapsed between two events represented by
- *	@start and @stop
- *
- *	@nr_pages -	number of pages processed between @start and @stop
- *	@msg -		introductory message to print
- */
-
-void swsusp_show_speed(struct timeval *start, struct timeval *stop,
-			unsigned nr_pages, char *msg)
-{
-	s64 elapsed_centisecs64;
-	int centisecs;
-	int k;
-	int kps;
-
-	elapsed_centisecs64 = timeval_to_ns(stop) - timeval_to_ns(start);
-	do_div(elapsed_centisecs64, NSEC_PER_SEC / 100);
-	centisecs = elapsed_centisecs64;
-	if (centisecs == 0)
-		centisecs = 1;	/* avoid div-by-zero */
-	k = nr_pages * (PAGE_SIZE / 1024);
-	kps = (k * 100) / centisecs;
-	printk(KERN_INFO "PM: %s %d kbytes in %d.%02d seconds (%d.%02d MB/s)\n",
-			msg, k,
-			centisecs / 100, centisecs % 100,
-			kps / 1000, (kps % 1000) / 10);
-}
diff --git a/kernel/printk.c b/kernel/printk.c
index f38b07f..b5ac4d9 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -33,6 +33,7 @@
 #include <linux/bootmem.h>
 #include <linux/syscalls.h>
 #include <linux/kexec.h>
+#include <linux/ratelimit.h>
 
 #include <asm/uaccess.h>
 
@@ -1376,11 +1377,11 @@
  */
 DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10);
 
-int printk_ratelimit(void)
+int __printk_ratelimit(const char *func)
 {
-	return __ratelimit(&printk_ratelimit_state);
+	return ___ratelimit(&printk_ratelimit_state, func);
 }
-EXPORT_SYMBOL(printk_ratelimit);
+EXPORT_SYMBOL(__printk_ratelimit);
 
 /**
  * printk_timed_ratelimit - caller-controlled printk ratelimiting
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 4001833..9b7fd47 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -44,7 +44,6 @@
 #include <linux/cpu.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
-#include <linux/kernel_stat.h>
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 static struct lock_class_key rcu_lock_key;
@@ -53,8 +52,6 @@
 EXPORT_SYMBOL_GPL(rcu_lock_map);
 #endif
 
-int rcu_scheduler_active __read_mostly;
-
 /*
  * Awaken the corresponding synchronize_rcu() instance now that a
  * grace period has elapsed.
@@ -66,122 +63,3 @@
 	rcu = container_of(head, struct rcu_synchronize, head);
 	complete(&rcu->completion);
 }
-
-#ifdef CONFIG_TREE_PREEMPT_RCU
-
-/**
- * synchronize_rcu - wait until a grace period has elapsed.
- *
- * Control will return to the caller some time after a full grace
- * period has elapsed, in other words after all currently executing RCU
- * read-side critical sections have completed.  RCU read-side critical
- * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
- * and may be nested.
- */
-void synchronize_rcu(void)
-{
-	struct rcu_synchronize rcu;
-
-	if (!rcu_scheduler_active)
-		return;
-
-	init_completion(&rcu.completion);
-	/* Will wake me after RCU finished. */
-	call_rcu(&rcu.head, wakeme_after_rcu);
-	/* Wait for it. */
-	wait_for_completion(&rcu.completion);
-}
-EXPORT_SYMBOL_GPL(synchronize_rcu);
-
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-
-/**
- * synchronize_sched - wait until an rcu-sched grace period has elapsed.
- *
- * Control will return to the caller some time after a full rcu-sched
- * grace period has elapsed, in other words after all currently executing
- * rcu-sched read-side critical sections have completed.   These read-side
- * critical sections are delimited by rcu_read_lock_sched() and
- * rcu_read_unlock_sched(), and may be nested.  Note that preempt_disable(),
- * local_irq_disable(), and so on may be used in place of
- * rcu_read_lock_sched().
- *
- * This means that all preempt_disable code sequences, including NMI and
- * hardware-interrupt handlers, in progress on entry will have completed
- * before this primitive returns.  However, this does not guarantee that
- * softirq handlers will have completed, since in some kernels, these
- * handlers can run in process context, and can block.
- *
- * This primitive provides the guarantees made by the (now removed)
- * synchronize_kernel() API.  In contrast, synchronize_rcu() only
- * guarantees that rcu_read_lock() sections will have completed.
- * In "classic RCU", these two guarantees happen to be one and
- * the same, but can differ in realtime RCU implementations.
- */
-void synchronize_sched(void)
-{
-	struct rcu_synchronize rcu;
-
-	if (rcu_blocking_is_gp())
-		return;
-
-	init_completion(&rcu.completion);
-	/* Will wake me after RCU finished. */
-	call_rcu_sched(&rcu.head, wakeme_after_rcu);
-	/* Wait for it. */
-	wait_for_completion(&rcu.completion);
-}
-EXPORT_SYMBOL_GPL(synchronize_sched);
-
-/**
- * synchronize_rcu_bh - wait until an rcu_bh grace period has elapsed.
- *
- * Control will return to the caller some time after a full rcu_bh grace
- * period has elapsed, in other words after all currently executing rcu_bh
- * read-side critical sections have completed.  RCU read-side critical
- * sections are delimited by rcu_read_lock_bh() and rcu_read_unlock_bh(),
- * and may be nested.
- */
-void synchronize_rcu_bh(void)
-{
-	struct rcu_synchronize rcu;
-
-	if (rcu_blocking_is_gp())
-		return;
-
-	init_completion(&rcu.completion);
-	/* Will wake me after RCU finished. */
-	call_rcu_bh(&rcu.head, wakeme_after_rcu);
-	/* Wait for it. */
-	wait_for_completion(&rcu.completion);
-}
-EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
-
-static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
-		unsigned long action, void *hcpu)
-{
-	return rcu_cpu_notify(self, action, hcpu);
-}
-
-void __init rcu_init(void)
-{
-	int i;
-
-	__rcu_init();
-	cpu_notifier(rcu_barrier_cpu_hotplug, 0);
-
-	/*
-	 * We don't need protection against CPU-hotplug here because
-	 * this is called early in boot, before either interrupts
-	 * or the scheduler are operational.
-	 */
-	for_each_online_cpu(i)
-		rcu_barrier_cpu_hotplug(NULL, CPU_UP_PREPARE, (void *)(long)i);
-}
-
-void rcu_scheduler_starting(void)
-{
-	WARN_ON(num_online_cpus() != 1);
-	WARN_ON(nr_context_switches() > 0);
-	rcu_scheduler_active = 1;
-}
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
new file mode 100644
index 0000000..9f6d9ff
--- /dev/null
+++ b/kernel/rcutiny.c
@@ -0,0 +1,282 @@
+/*
+ * Read-Copy Update mechanism for mutual exclusion, the Bloatwatch edition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2008
+ *
+ * Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+ *
+ * For detailed explanation of Read-Copy Update mechanism see -
+ *		Documentation/RCU
+ */
+#include <linux/moduleparam.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/rcupdate.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/cpu.h>
+
+/* Global control variables for rcupdate callback mechanism. */
+struct rcu_ctrlblk {
+	struct rcu_head *rcucblist;	/* List of pending callbacks (CBs). */
+	struct rcu_head **donetail;	/* ->next pointer of last "done" CB. */
+	struct rcu_head **curtail;	/* ->next pointer of last CB. */
+};
+
+/* Definition for rcupdate control block. */
+static struct rcu_ctrlblk rcu_ctrlblk = {
+	.donetail	= &rcu_ctrlblk.rcucblist,
+	.curtail	= &rcu_ctrlblk.rcucblist,
+};
+
+static struct rcu_ctrlblk rcu_bh_ctrlblk = {
+	.donetail	= &rcu_bh_ctrlblk.rcucblist,
+	.curtail	= &rcu_bh_ctrlblk.rcucblist,
+};
+
+#ifdef CONFIG_NO_HZ
+
+static long rcu_dynticks_nesting = 1;
+
+/*
+ * Enter dynticks-idle mode, which is an extended quiescent state
+ * if we have fully entered that mode (i.e., if the new value of
+ * dynticks_nesting is zero).
+ */
+void rcu_enter_nohz(void)
+{
+	if (--rcu_dynticks_nesting == 0)
+		rcu_sched_qs(0); /* implies rcu_bh_qsctr_inc(0) */
+}
+
+/*
+ * Exit dynticks-idle mode, so that we are no longer in an extended
+ * quiescent state.
+ */
+void rcu_exit_nohz(void)
+{
+	rcu_dynticks_nesting++;
+}
+
+#endif /* #ifdef CONFIG_NO_HZ */
+
+/*
+ * Helper function for rcu_qsctr_inc() and rcu_bh_qsctr_inc().
+ * Also disable irqs to avoid confusion due to interrupt handlers
+ * invoking call_rcu().
+ */
+static int rcu_qsctr_help(struct rcu_ctrlblk *rcp)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (rcp->rcucblist != NULL &&
+	    rcp->donetail != rcp->curtail) {
+		rcp->donetail = rcp->curtail;
+		local_irq_restore(flags);
+		return 1;
+	}
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+/*
+ * Record an rcu quiescent state.  And an rcu_bh quiescent state while we
+ * are at it, given that any rcu quiescent state is also an rcu_bh
+ * quiescent state.  Use "+" instead of "||" to defeat short circuiting.
+ */
+void rcu_sched_qs(int cpu)
+{
+	if (rcu_qsctr_help(&rcu_ctrlblk) + rcu_qsctr_help(&rcu_bh_ctrlblk))
+		raise_softirq(RCU_SOFTIRQ);
+}
+
+/*
+ * Record an rcu_bh quiescent state.
+ */
+void rcu_bh_qs(int cpu)
+{
+	if (rcu_qsctr_help(&rcu_bh_ctrlblk))
+		raise_softirq(RCU_SOFTIRQ);
+}
+
+/*
+ * Check to see if the scheduling-clock interrupt came from an extended
+ * quiescent state, and, if so, tell RCU about it.
+ */
+void rcu_check_callbacks(int cpu, int user)
+{
+	if (user ||
+	    (idle_cpu(cpu) &&
+	     !in_softirq() &&
+	     hardirq_count() <= (1 << HARDIRQ_SHIFT)))
+		rcu_sched_qs(cpu);
+	else if (!in_softirq())
+		rcu_bh_qs(cpu);
+}
+
+/*
+ * Helper function for rcu_process_callbacks() that operates on the
+ * specified rcu_ctrlkblk structure.
+ */
+static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
+{
+	struct rcu_head *next, *list;
+	unsigned long flags;
+
+	/* If no RCU callbacks ready to invoke, just return. */
+	if (&rcp->rcucblist == rcp->donetail)
+		return;
+
+	/* Move the ready-to-invoke callbacks to a local list. */
+	local_irq_save(flags);
+	list = rcp->rcucblist;
+	rcp->rcucblist = *rcp->donetail;
+	*rcp->donetail = NULL;
+	if (rcp->curtail == rcp->donetail)
+		rcp->curtail = &rcp->rcucblist;
+	rcp->donetail = &rcp->rcucblist;
+	local_irq_restore(flags);
+
+	/* Invoke the callbacks on the local list. */
+	while (list) {
+		next = list->next;
+		prefetch(next);
+		list->func(list);
+		list = next;
+	}
+}
+
+/*
+ * Invoke any callbacks whose grace period has completed.
+ */
+static void rcu_process_callbacks(struct softirq_action *unused)
+{
+	__rcu_process_callbacks(&rcu_ctrlblk);
+	__rcu_process_callbacks(&rcu_bh_ctrlblk);
+}
+
+/*
+ * Wait for a grace period to elapse.  But it is illegal to invoke
+ * synchronize_sched() from within an RCU read-side critical section.
+ * Therefore, any legal call to synchronize_sched() is a quiescent
+ * state, and so on a UP system, synchronize_sched() need do nothing.
+ * Ditto for synchronize_rcu_bh().  (But Lai Jiangshan points out the
+ * benefits of doing might_sleep() to reduce latency.)
+ *
+ * Cool, huh?  (Due to Josh Triplett.)
+ *
+ * But we want to make this a static inline later.
+ */
+void synchronize_sched(void)
+{
+	cond_resched();
+}
+EXPORT_SYMBOL_GPL(synchronize_sched);
+
+void synchronize_rcu_bh(void)
+{
+	synchronize_sched();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
+
+/*
+ * Helper function for call_rcu() and call_rcu_bh().
+ */
+static void __call_rcu(struct rcu_head *head,
+		       void (*func)(struct rcu_head *rcu),
+		       struct rcu_ctrlblk *rcp)
+{
+	unsigned long flags;
+
+	head->func = func;
+	head->next = NULL;
+
+	local_irq_save(flags);
+	*rcp->curtail = head;
+	rcp->curtail = &head->next;
+	local_irq_restore(flags);
+}
+
+/*
+ * Post an RCU callback to be invoked after the end of an RCU grace
+ * period.  But since we have but one CPU, that would be after any
+ * quiescent state.
+ */
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+	__call_rcu(head, func, &rcu_ctrlblk);
+}
+EXPORT_SYMBOL_GPL(call_rcu);
+
+/*
+ * Post an RCU bottom-half callback to be invoked after any subsequent
+ * quiescent state.
+ */
+void call_rcu_bh(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
+{
+	__call_rcu(head, func, &rcu_bh_ctrlblk);
+}
+EXPORT_SYMBOL_GPL(call_rcu_bh);
+
+void rcu_barrier(void)
+{
+	struct rcu_synchronize rcu;
+
+	init_completion(&rcu.completion);
+	/* Will wake me after RCU finished. */
+	call_rcu(&rcu.head, wakeme_after_rcu);
+	/* Wait for it. */
+	wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier);
+
+void rcu_barrier_bh(void)
+{
+	struct rcu_synchronize rcu;
+
+	init_completion(&rcu.completion);
+	/* Will wake me after RCU finished. */
+	call_rcu_bh(&rcu.head, wakeme_after_rcu);
+	/* Wait for it. */
+	wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_bh);
+
+void rcu_barrier_sched(void)
+{
+	struct rcu_synchronize rcu;
+
+	init_completion(&rcu.completion);
+	/* Will wake me after RCU finished. */
+	call_rcu_sched(&rcu.head, wakeme_after_rcu);
+	/* Wait for it. */
+	wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_sched);
+
+void __init rcu_init(void)
+{
+	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+}
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 697c0a0..a621a67 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -327,6 +327,11 @@
 		cur_ops->deferred_free(rp);
 }
 
+static int rcu_no_completed(void)
+{
+	return 0;
+}
+
 static void rcu_torture_deferred_free(struct rcu_torture *p)
 {
 	call_rcu(&p->rtort_rcu, rcu_torture_cb);
@@ -388,6 +393,21 @@
 	.name		= "rcu_sync"
 };
 
+static struct rcu_torture_ops rcu_expedited_ops = {
+	.init		= rcu_sync_torture_init,
+	.cleanup	= NULL,
+	.readlock	= rcu_torture_read_lock,
+	.read_delay	= rcu_read_delay,  /* just reuse rcu's version. */
+	.readunlock	= rcu_torture_read_unlock,
+	.completed	= rcu_no_completed,
+	.deferred_free	= rcu_sync_torture_deferred_free,
+	.sync		= synchronize_rcu_expedited,
+	.cb_barrier	= NULL,
+	.stats		= NULL,
+	.irq_capable	= 1,
+	.name		= "rcu_expedited"
+};
+
 /*
  * Definitions for rcu_bh torture testing.
  */
@@ -547,6 +567,25 @@
 	.name		= "srcu"
 };
 
+static void srcu_torture_synchronize_expedited(void)
+{
+	synchronize_srcu_expedited(&srcu_ctl);
+}
+
+static struct rcu_torture_ops srcu_expedited_ops = {
+	.init		= srcu_torture_init,
+	.cleanup	= srcu_torture_cleanup,
+	.readlock	= srcu_torture_read_lock,
+	.read_delay	= srcu_read_delay,
+	.readunlock	= srcu_torture_read_unlock,
+	.completed	= srcu_torture_completed,
+	.deferred_free	= rcu_sync_torture_deferred_free,
+	.sync		= srcu_torture_synchronize_expedited,
+	.cb_barrier	= NULL,
+	.stats		= srcu_torture_stats,
+	.name		= "srcu_expedited"
+};
+
 /*
  * Definitions for sched torture testing.
  */
@@ -562,11 +601,6 @@
 	preempt_enable();
 }
 
-static int sched_torture_completed(void)
-{
-	return 0;
-}
-
 static void rcu_sched_torture_deferred_free(struct rcu_torture *p)
 {
 	call_rcu_sched(&p->rtort_rcu, rcu_torture_cb);
@@ -583,7 +617,7 @@
 	.readlock	= sched_torture_read_lock,
 	.read_delay	= rcu_read_delay,  /* just reuse rcu's version. */
 	.readunlock	= sched_torture_read_unlock,
-	.completed	= sched_torture_completed,
+	.completed	= rcu_no_completed,
 	.deferred_free	= rcu_sched_torture_deferred_free,
 	.sync		= sched_torture_synchronize,
 	.cb_barrier	= rcu_barrier_sched,
@@ -592,13 +626,13 @@
 	.name		= "sched"
 };
 
-static struct rcu_torture_ops sched_ops_sync = {
+static struct rcu_torture_ops sched_sync_ops = {
 	.init		= rcu_sync_torture_init,
 	.cleanup	= NULL,
 	.readlock	= sched_torture_read_lock,
 	.read_delay	= rcu_read_delay,  /* just reuse rcu's version. */
 	.readunlock	= sched_torture_read_unlock,
-	.completed	= sched_torture_completed,
+	.completed	= rcu_no_completed,
 	.deferred_free	= rcu_sync_torture_deferred_free,
 	.sync		= sched_torture_synchronize,
 	.cb_barrier	= NULL,
@@ -612,7 +646,7 @@
 	.readlock	= sched_torture_read_lock,
 	.read_delay	= rcu_read_delay,  /* just reuse rcu's version. */
 	.readunlock	= sched_torture_read_unlock,
-	.completed	= sched_torture_completed,
+	.completed	= rcu_no_completed,
 	.deferred_free	= rcu_sync_torture_deferred_free,
 	.sync		= synchronize_sched_expedited,
 	.cb_barrier	= NULL,
@@ -1097,9 +1131,10 @@
 	int cpu;
 	int firsterr = 0;
 	static struct rcu_torture_ops *torture_ops[] =
-		{ &rcu_ops, &rcu_sync_ops, &rcu_bh_ops, &rcu_bh_sync_ops,
-		  &sched_expedited_ops,
-		  &srcu_ops, &sched_ops, &sched_ops_sync, };
+		{ &rcu_ops, &rcu_sync_ops, &rcu_expedited_ops,
+		  &rcu_bh_ops, &rcu_bh_sync_ops,
+		  &srcu_ops, &srcu_expedited_ops,
+		  &sched_ops, &sched_sync_ops, &sched_expedited_ops, };
 
 	mutex_lock(&fullstop_mutex);
 
@@ -1110,8 +1145,12 @@
 			break;
 	}
 	if (i == ARRAY_SIZE(torture_ops)) {
-		printk(KERN_ALERT "rcutorture: invalid torture type: \"%s\"\n",
+		printk(KERN_ALERT "rcu-torture: invalid torture type: \"%s\"\n",
 		       torture_type);
+		printk(KERN_ALERT "rcu-torture types:");
+		for (i = 0; i < ARRAY_SIZE(torture_ops); i++)
+			printk(KERN_ALERT " %s", torture_ops[i]->name);
+		printk(KERN_ALERT "\n");
 		mutex_unlock(&fullstop_mutex);
 		return -EINVAL;
 	}
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index f3077c0..53ae959 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -46,18 +46,22 @@
 #include <linux/cpu.h>
 #include <linux/mutex.h>
 #include <linux/time.h>
+#include <linux/kernel_stat.h>
 
 #include "rcutree.h"
 
 /* Data structures. */
 
+static struct lock_class_key rcu_node_class[NUM_RCU_LVLS];
+
 #define RCU_STATE_INITIALIZER(name) { \
 	.level = { &name.node[0] }, \
 	.levelcnt = { \
 		NUM_RCU_LVL_0,  /* root of hierarchy. */ \
 		NUM_RCU_LVL_1, \
 		NUM_RCU_LVL_2, \
-		NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \
+		NUM_RCU_LVL_3, \
+		NUM_RCU_LVL_4, /* == MAX_RCU_LVLS */ \
 	}, \
 	.signaled = RCU_GP_IDLE, \
 	.gpnum = -300, \
@@ -77,6 +81,8 @@
 struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
 DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
 
+static int rcu_scheduler_active __read_mostly;
+
 
 /*
  * Return true if an RCU grace period is in progress.  The ACCESS_ONCE()s
@@ -98,7 +104,7 @@
 	struct rcu_data *rdp;
 
 	rdp = &per_cpu(rcu_sched_data, cpu);
-	rdp->passed_quiesc_completed = rdp->completed;
+	rdp->passed_quiesc_completed = rdp->gpnum - 1;
 	barrier();
 	rdp->passed_quiesc = 1;
 	rcu_preempt_note_context_switch(cpu);
@@ -109,7 +115,7 @@
 	struct rcu_data *rdp;
 
 	rdp = &per_cpu(rcu_bh_data, cpu);
-	rdp->passed_quiesc_completed = rdp->completed;
+	rdp->passed_quiesc_completed = rdp->gpnum - 1;
 	barrier();
 	rdp->passed_quiesc = 1;
 }
@@ -335,28 +341,9 @@
 		set_need_resched();
 }
 
-/*
- * Record the specified "completed" value, which is later used to validate
- * dynticks counter manipulations.  Specify "rsp->completed - 1" to
- * unconditionally invalidate any future dynticks manipulations (which is
- * useful at the beginning of a grace period).
- */
-static void dyntick_record_completed(struct rcu_state *rsp, long comp)
-{
-	rsp->dynticks_completed = comp;
-}
-
 #ifdef CONFIG_SMP
 
 /*
- * Recall the previously recorded value of the completion for dynticks.
- */
-static long dyntick_recall_completed(struct rcu_state *rsp)
-{
-	return rsp->dynticks_completed;
-}
-
-/*
  * Snapshot the specified CPU's dynticks counter so that we can later
  * credit them with an implicit quiescent state.  Return 1 if this CPU
  * is in dynticks idle mode, which is an extended quiescent state.
@@ -419,24 +406,8 @@
 
 #else /* #ifdef CONFIG_NO_HZ */
 
-static void dyntick_record_completed(struct rcu_state *rsp, long comp)
-{
-}
-
 #ifdef CONFIG_SMP
 
-/*
- * If there are no dynticks, then the only way that a CPU can passively
- * be in a quiescent state is to be offline.  Unlike dynticks idle, which
- * is a point in time during the prior (already finished) grace period,
- * an offline CPU is always in a quiescent state, and thus can be
- * unconditionally applied.  So just return the current value of completed.
- */
-static long dyntick_recall_completed(struct rcu_state *rsp)
-{
-	return rsp->completed;
-}
-
 static int dyntick_save_progress_counter(struct rcu_data *rdp)
 {
 	return 0;
@@ -553,13 +524,33 @@
 /*
  * Update CPU-local rcu_data state to record the newly noticed grace period.
  * This is used both when we started the grace period and when we notice
- * that someone else started the grace period.
+ * that someone else started the grace period.  The caller must hold the
+ * ->lock of the leaf rcu_node structure corresponding to the current CPU,
+ *  and must have irqs disabled.
  */
+static void __note_new_gpnum(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp)
+{
+	if (rdp->gpnum != rnp->gpnum) {
+		rdp->qs_pending = 1;
+		rdp->passed_quiesc = 0;
+		rdp->gpnum = rnp->gpnum;
+	}
+}
+
 static void note_new_gpnum(struct rcu_state *rsp, struct rcu_data *rdp)
 {
-	rdp->qs_pending = 1;
-	rdp->passed_quiesc = 0;
-	rdp->gpnum = rsp->gpnum;
+	unsigned long flags;
+	struct rcu_node *rnp;
+
+	local_irq_save(flags);
+	rnp = rdp->mynode;
+	if (rdp->gpnum == ACCESS_ONCE(rnp->gpnum) || /* outside lock. */
+	    !spin_trylock(&rnp->lock)) { /* irqs already off, retry later. */
+		local_irq_restore(flags);
+		return;
+	}
+	__note_new_gpnum(rsp, rnp, rdp);
+	spin_unlock_irqrestore(&rnp->lock, flags);
 }
 
 /*
@@ -583,31 +574,59 @@
 }
 
 /*
- * Start a new RCU grace period if warranted, re-initializing the hierarchy
- * in preparation for detecting the next grace period.  The caller must hold
- * the root node's ->lock, which is released before return.  Hard irqs must
- * be disabled.
+ * Advance this CPU's callbacks, but only if the current grace period
+ * has ended.  This may be called only from the CPU to whom the rdp
+ * belongs.  In addition, the corresponding leaf rcu_node structure's
+ * ->lock must be held by the caller, with irqs disabled.
  */
 static void
-rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
-	__releases(rcu_get_root(rsp)->lock)
+__rcu_process_gp_end(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp)
 {
-	struct rcu_data *rdp = rsp->rda[smp_processor_id()];
-	struct rcu_node *rnp = rcu_get_root(rsp);
+	/* Did another grace period end? */
+	if (rdp->completed != rnp->completed) {
 
-	if (!cpu_needs_another_gp(rsp, rdp)) {
-		spin_unlock_irqrestore(&rnp->lock, flags);
+		/* Advance callbacks.  No harm if list empty. */
+		rdp->nxttail[RCU_DONE_TAIL] = rdp->nxttail[RCU_WAIT_TAIL];
+		rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_READY_TAIL];
+		rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
+
+		/* Remember that we saw this grace-period completion. */
+		rdp->completed = rnp->completed;
+	}
+}
+
+/*
+ * Advance this CPU's callbacks, but only if the current grace period
+ * has ended.  This may be called only from the CPU to whom the rdp
+ * belongs.
+ */
+static void
+rcu_process_gp_end(struct rcu_state *rsp, struct rcu_data *rdp)
+{
+	unsigned long flags;
+	struct rcu_node *rnp;
+
+	local_irq_save(flags);
+	rnp = rdp->mynode;
+	if (rdp->completed == ACCESS_ONCE(rnp->completed) || /* outside lock. */
+	    !spin_trylock(&rnp->lock)) { /* irqs already off, retry later. */
+		local_irq_restore(flags);
 		return;
 	}
+	__rcu_process_gp_end(rsp, rnp, rdp);
+	spin_unlock_irqrestore(&rnp->lock, flags);
+}
 
-	/* Advance to a new grace period and initialize state. */
-	rsp->gpnum++;
-	WARN_ON_ONCE(rsp->signaled == RCU_GP_INIT);
-	rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
-	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	record_gp_stall_check_time(rsp);
-	dyntick_record_completed(rsp, rsp->completed - 1);
-	note_new_gpnum(rsp, rdp);
+/*
+ * Do per-CPU grace-period initialization for running CPU.  The caller
+ * must hold the lock of the leaf rcu_node structure corresponding to
+ * this CPU.
+ */
+static void
+rcu_start_gp_per_cpu(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp)
+{
+	/* Prior grace period ended, so advance callbacks for current CPU. */
+	__rcu_process_gp_end(rsp, rnp, rdp);
 
 	/*
 	 * Because this CPU just now started the new grace period, we know
@@ -623,12 +642,59 @@
 	rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
 	rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
 
+	/* Set state so that this CPU will detect the next quiescent state. */
+	__note_new_gpnum(rsp, rnp, rdp);
+}
+
+/*
+ * Start a new RCU grace period if warranted, re-initializing the hierarchy
+ * in preparation for detecting the next grace period.  The caller must hold
+ * the root node's ->lock, which is released before return.  Hard irqs must
+ * be disabled.
+ */
+static void
+rcu_start_gp(struct rcu_state *rsp, unsigned long flags)
+	__releases(rcu_get_root(rsp)->lock)
+{
+	struct rcu_data *rdp = rsp->rda[smp_processor_id()];
+	struct rcu_node *rnp = rcu_get_root(rsp);
+
+	if (!cpu_needs_another_gp(rsp, rdp)) {
+		if (rnp->completed == rsp->completed) {
+			spin_unlock_irqrestore(&rnp->lock, flags);
+			return;
+		}
+		spin_unlock(&rnp->lock);	 /* irqs remain disabled. */
+
+		/*
+		 * Propagate new ->completed value to rcu_node structures
+		 * so that other CPUs don't have to wait until the start
+		 * of the next grace period to process their callbacks.
+		 */
+		rcu_for_each_node_breadth_first(rsp, rnp) {
+			spin_lock(&rnp->lock);	 /* irqs already disabled. */
+			rnp->completed = rsp->completed;
+			spin_unlock(&rnp->lock); /* irqs remain disabled. */
+		}
+		local_irq_restore(flags);
+		return;
+	}
+
+	/* Advance to a new grace period and initialize state. */
+	rsp->gpnum++;
+	WARN_ON_ONCE(rsp->signaled == RCU_GP_INIT);
+	rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
+	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
+	record_gp_stall_check_time(rsp);
+
 	/* Special-case the common single-level case. */
 	if (NUM_RCU_NODES == 1) {
 		rcu_preempt_check_blocked_tasks(rnp);
 		rnp->qsmask = rnp->qsmaskinit;
 		rnp->gpnum = rsp->gpnum;
+		rnp->completed = rsp->completed;
 		rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state OK. */
+		rcu_start_gp_per_cpu(rsp, rnp, rdp);
 		spin_unlock_irqrestore(&rnp->lock, flags);
 		return;
 	}
@@ -661,6 +727,9 @@
 		rcu_preempt_check_blocked_tasks(rnp);
 		rnp->qsmask = rnp->qsmaskinit;
 		rnp->gpnum = rsp->gpnum;
+		rnp->completed = rsp->completed;
+		if (rnp == rdp->mynode)
+			rcu_start_gp_per_cpu(rsp, rnp, rdp);
 		spin_unlock(&rnp->lock);	/* irqs remain disabled. */
 	}
 
@@ -672,58 +741,32 @@
 }
 
 /*
- * Advance this CPU's callbacks, but only if the current grace period
- * has ended.  This may be called only from the CPU to whom the rdp
- * belongs.
+ * Report a full set of quiescent states to the specified rcu_state
+ * data structure.  This involves cleaning up after the prior grace
+ * period and letting rcu_start_gp() start up the next grace period
+ * if one is needed.  Note that the caller must hold rnp->lock, as
+ * required by rcu_start_gp(), which will release it.
  */
-static void
-rcu_process_gp_end(struct rcu_state *rsp, struct rcu_data *rdp)
-{
-	long completed_snap;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	completed_snap = ACCESS_ONCE(rsp->completed);  /* outside of lock. */
-
-	/* Did another grace period end? */
-	if (rdp->completed != completed_snap) {
-
-		/* Advance callbacks.  No harm if list empty. */
-		rdp->nxttail[RCU_DONE_TAIL] = rdp->nxttail[RCU_WAIT_TAIL];
-		rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_READY_TAIL];
-		rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
-
-		/* Remember that we saw this grace-period completion. */
-		rdp->completed = completed_snap;
-	}
-	local_irq_restore(flags);
-}
-
-/*
- * Clean up after the prior grace period and let rcu_start_gp() start up
- * the next grace period if one is needed.  Note that the caller must
- * hold rnp->lock, as required by rcu_start_gp(), which will release it.
- */
-static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags)
+static void rcu_report_qs_rsp(struct rcu_state *rsp, unsigned long flags)
 	__releases(rcu_get_root(rsp)->lock)
 {
 	WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
 	rsp->completed = rsp->gpnum;
 	rsp->signaled = RCU_GP_IDLE;
-	rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
 	rcu_start_gp(rsp, flags);  /* releases root node's rnp->lock. */
 }
 
 /*
- * Similar to cpu_quiet(), for which it is a helper function.  Allows
- * a group of CPUs to be quieted at one go, though all the CPUs in the
- * group must be represented by the same leaf rcu_node structure.
- * That structure's lock must be held upon entry, and it is released
- * before return.
+ * Similar to rcu_report_qs_rdp(), for which it is a helper function.
+ * Allows quiescent states for a group of CPUs to be reported at one go
+ * to the specified rcu_node structure, though all the CPUs in the group
+ * must be represented by the same rcu_node structure (which need not be
+ * a leaf rcu_node structure, though it often will be).  That structure's
+ * lock must be held upon entry, and it is released before return.
  */
 static void
-cpu_quiet_msk(unsigned long mask, struct rcu_state *rsp, struct rcu_node *rnp,
-	      unsigned long flags)
+rcu_report_qs_rnp(unsigned long mask, struct rcu_state *rsp,
+		  struct rcu_node *rnp, unsigned long flags)
 	__releases(rnp->lock)
 {
 	struct rcu_node *rnp_c;
@@ -759,21 +802,23 @@
 
 	/*
 	 * Get here if we are the last CPU to pass through a quiescent
-	 * state for this grace period.  Invoke cpu_quiet_msk_finish()
+	 * state for this grace period.  Invoke rcu_report_qs_rsp()
 	 * to clean up and start the next grace period if one is needed.
 	 */
-	cpu_quiet_msk_finish(rsp, flags); /* releases rnp->lock. */
+	rcu_report_qs_rsp(rsp, flags); /* releases rnp->lock. */
 }
 
 /*
- * Record a quiescent state for the specified CPU, which must either be
- * the current CPU.  The lastcomp argument is used to make sure we are
- * still in the grace period of interest.  We don't want to end the current
- * grace period based on quiescent states detected in an earlier grace
- * period!
+ * Record a quiescent state for the specified CPU to that CPU's rcu_data
+ * structure.  This must be either called from the specified CPU, or
+ * called when the specified CPU is known to be offline (and when it is
+ * also known that no other CPU is concurrently trying to help the offline
+ * CPU).  The lastcomp argument is used to make sure we are still in the
+ * grace period of interest.  We don't want to end the current grace period
+ * based on quiescent states detected in an earlier grace period!
  */
 static void
-cpu_quiet(int cpu, struct rcu_state *rsp, struct rcu_data *rdp, long lastcomp)
+rcu_report_qs_rdp(int cpu, struct rcu_state *rsp, struct rcu_data *rdp, long lastcomp)
 {
 	unsigned long flags;
 	unsigned long mask;
@@ -781,15 +826,15 @@
 
 	rnp = rdp->mynode;
 	spin_lock_irqsave(&rnp->lock, flags);
-	if (lastcomp != ACCESS_ONCE(rsp->completed)) {
+	if (lastcomp != rnp->completed) {
 
 		/*
 		 * Someone beat us to it for this grace period, so leave.
 		 * The race with GP start is resolved by the fact that we
 		 * hold the leaf rcu_node lock, so that the per-CPU bits
 		 * cannot yet be initialized -- so we would simply find our
-		 * CPU's bit already cleared in cpu_quiet_msk() if this race
-		 * occurred.
+		 * CPU's bit already cleared in rcu_report_qs_rnp() if this
+		 * race occurred.
 		 */
 		rdp->passed_quiesc = 0;	/* try again later! */
 		spin_unlock_irqrestore(&rnp->lock, flags);
@@ -807,7 +852,7 @@
 		 */
 		rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
 
-		cpu_quiet_msk(mask, rsp, rnp, flags); /* releases rnp->lock */
+		rcu_report_qs_rnp(mask, rsp, rnp, flags); /* rlses rnp->lock */
 	}
 }
 
@@ -838,8 +883,11 @@
 	if (!rdp->passed_quiesc)
 		return;
 
-	/* Tell RCU we are done (but cpu_quiet() will be the judge of that). */
-	cpu_quiet(rdp->cpu, rsp, rdp, rdp->passed_quiesc_completed);
+	/*
+	 * Tell RCU we are done (but rcu_report_qs_rdp() will be the
+	 * judge of that).
+	 */
+	rcu_report_qs_rdp(rdp->cpu, rsp, rdp, rdp->passed_quiesc_completed);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -899,8 +947,8 @@
 static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 {
 	unsigned long flags;
-	long lastcomp;
 	unsigned long mask;
+	int need_report = 0;
 	struct rcu_data *rdp = rsp->rda[cpu];
 	struct rcu_node *rnp;
 
@@ -914,30 +962,32 @@
 		spin_lock(&rnp->lock);		/* irqs already disabled. */
 		rnp->qsmaskinit &= ~mask;
 		if (rnp->qsmaskinit != 0) {
-			spin_unlock(&rnp->lock); /* irqs remain disabled. */
+			if (rnp != rdp->mynode)
+				spin_unlock(&rnp->lock); /* irqs remain disabled. */
 			break;
 		}
-
-		/*
-		 * If there was a task blocking the current grace period,
-		 * and if all CPUs have checked in, we need to propagate
-		 * the quiescent state up the rcu_node hierarchy.  But that
-		 * is inconvenient at the moment due to deadlock issues if
-		 * this should end the current grace period.  So set the
-		 * offlined CPU's bit in ->qsmask in order to force the
-		 * next force_quiescent_state() invocation to clean up this
-		 * mess in a deadlock-free manner.
-		 */
-		if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask)
-			rnp->qsmask |= mask;
-
+		if (rnp == rdp->mynode)
+			need_report = rcu_preempt_offline_tasks(rsp, rnp, rdp);
+		else
+			spin_unlock(&rnp->lock); /* irqs remain disabled. */
 		mask = rnp->grpmask;
-		spin_unlock(&rnp->lock);	/* irqs remain disabled. */
 		rnp = rnp->parent;
 	} while (rnp != NULL);
-	lastcomp = rsp->completed;
 
-	spin_unlock_irqrestore(&rsp->onofflock, flags);
+	/*
+	 * We still hold the leaf rcu_node structure lock here, and
+	 * irqs are still disabled.  The reason for this subterfuge is
+	 * because invoking rcu_report_unblock_qs_rnp() with ->onofflock
+	 * held leads to deadlock.
+	 */
+	spin_unlock(&rsp->onofflock); /* irqs remain disabled. */
+	rnp = rdp->mynode;
+	if (need_report & RCU_OFL_TASKS_NORM_GP)
+		rcu_report_unblock_qs_rnp(rnp, flags);
+	else
+		spin_unlock_irqrestore(&rnp->lock, flags);
+	if (need_report & RCU_OFL_TASKS_EXP_GP)
+		rcu_report_exp_rnp(rsp, rnp);
 
 	rcu_adopt_orphan_cbs(rsp);
 }
@@ -1109,7 +1159,7 @@
 	rcu_for_each_leaf_node(rsp, rnp) {
 		mask = 0;
 		spin_lock_irqsave(&rnp->lock, flags);
-		if (rsp->completed != lastcomp) {
+		if (rnp->completed != lastcomp) {
 			spin_unlock_irqrestore(&rnp->lock, flags);
 			return 1;
 		}
@@ -1123,10 +1173,10 @@
 			if ((rnp->qsmask & bit) != 0 && f(rsp->rda[cpu]))
 				mask |= bit;
 		}
-		if (mask != 0 && rsp->completed == lastcomp) {
+		if (mask != 0 && rnp->completed == lastcomp) {
 
-			/* cpu_quiet_msk() releases rnp->lock. */
-			cpu_quiet_msk(mask, rsp, rnp, flags);
+			/* rcu_report_qs_rnp() releases rnp->lock. */
+			rcu_report_qs_rnp(mask, rsp, rnp, flags);
 			continue;
 		}
 		spin_unlock_irqrestore(&rnp->lock, flags);
@@ -1144,6 +1194,7 @@
 	long lastcomp;
 	struct rcu_node *rnp = rcu_get_root(rsp);
 	u8 signaled;
+	u8 forcenow;
 
 	if (!rcu_gp_in_progress(rsp))
 		return;  /* No grace period in progress, nothing to force. */
@@ -1156,10 +1207,10 @@
 		goto unlock_ret; /* no emergency and done recently. */
 	rsp->n_force_qs++;
 	spin_lock(&rnp->lock);
-	lastcomp = rsp->completed;
+	lastcomp = rsp->gpnum - 1;
 	signaled = rsp->signaled;
 	rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
-	if (lastcomp == rsp->gpnum) {
+	if(!rcu_gp_in_progress(rsp)) {
 		rsp->n_force_qs_ngp++;
 		spin_unlock(&rnp->lock);
 		goto unlock_ret;  /* no GP in progress, time updated. */
@@ -1180,21 +1231,29 @@
 		if (rcu_process_dyntick(rsp, lastcomp,
 					dyntick_save_progress_counter))
 			goto unlock_ret;
+		/* fall into next case. */
+
+	case RCU_SAVE_COMPLETED:
 
 		/* Update state, record completion counter. */
+		forcenow = 0;
 		spin_lock(&rnp->lock);
-		if (lastcomp == rsp->completed &&
-		    rsp->signaled == RCU_SAVE_DYNTICK) {
+		if (lastcomp + 1 == rsp->gpnum &&
+		    lastcomp == rsp->completed &&
+		    rsp->signaled == signaled) {
 			rsp->signaled = RCU_FORCE_QS;
-			dyntick_record_completed(rsp, lastcomp);
+			rsp->completed_fqs = lastcomp;
+			forcenow = signaled == RCU_SAVE_COMPLETED;
 		}
 		spin_unlock(&rnp->lock);
-		break;
+		if (!forcenow)
+			break;
+		/* fall into next case. */
 
 	case RCU_FORCE_QS:
 
 		/* Check dyntick-idle state, send IPI to laggarts. */
-		if (rcu_process_dyntick(rsp, dyntick_recall_completed(rsp),
+		if (rcu_process_dyntick(rsp, rsp->completed_fqs,
 					rcu_implicit_dynticks_qs))
 			goto unlock_ret;
 
@@ -1351,6 +1410,68 @@
 }
 EXPORT_SYMBOL_GPL(call_rcu_bh);
 
+/**
+ * synchronize_sched - wait until an rcu-sched grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full rcu-sched
+ * grace period has elapsed, in other words after all currently executing
+ * rcu-sched read-side critical sections have completed.   These read-side
+ * critical sections are delimited by rcu_read_lock_sched() and
+ * rcu_read_unlock_sched(), and may be nested.  Note that preempt_disable(),
+ * local_irq_disable(), and so on may be used in place of
+ * rcu_read_lock_sched().
+ *
+ * This means that all preempt_disable code sequences, including NMI and
+ * hardware-interrupt handlers, in progress on entry will have completed
+ * before this primitive returns.  However, this does not guarantee that
+ * softirq handlers will have completed, since in some kernels, these
+ * handlers can run in process context, and can block.
+ *
+ * This primitive provides the guarantees made by the (now removed)
+ * synchronize_kernel() API.  In contrast, synchronize_rcu() only
+ * guarantees that rcu_read_lock() sections will have completed.
+ * In "classic RCU", these two guarantees happen to be one and
+ * the same, but can differ in realtime RCU implementations.
+ */
+void synchronize_sched(void)
+{
+	struct rcu_synchronize rcu;
+
+	if (rcu_blocking_is_gp())
+		return;
+
+	init_completion(&rcu.completion);
+	/* Will wake me after RCU finished. */
+	call_rcu_sched(&rcu.head, wakeme_after_rcu);
+	/* Wait for it. */
+	wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(synchronize_sched);
+
+/**
+ * synchronize_rcu_bh - wait until an rcu_bh grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full rcu_bh grace
+ * period has elapsed, in other words after all currently executing rcu_bh
+ * read-side critical sections have completed.  RCU read-side critical
+ * sections are delimited by rcu_read_lock_bh() and rcu_read_unlock_bh(),
+ * and may be nested.
+ */
+void synchronize_rcu_bh(void)
+{
+	struct rcu_synchronize rcu;
+
+	if (rcu_blocking_is_gp())
+		return;
+
+	init_completion(&rcu.completion);
+	/* Will wake me after RCU finished. */
+	call_rcu_bh(&rcu.head, wakeme_after_rcu);
+	/* Wait for it. */
+	wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
+
 /*
  * Check to see if there is any immediate RCU-related work to be done
  * by the current CPU, for the specified type of RCU, returning 1 if so.
@@ -1360,6 +1481,8 @@
  */
 static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp)
 {
+	struct rcu_node *rnp = rdp->mynode;
+
 	rdp->n_rcu_pending++;
 
 	/* Check for CPU stalls, if enabled. */
@@ -1384,13 +1507,13 @@
 	}
 
 	/* Has another RCU grace period completed?  */
-	if (ACCESS_ONCE(rsp->completed) != rdp->completed) { /* outside lock */
+	if (ACCESS_ONCE(rnp->completed) != rdp->completed) { /* outside lock */
 		rdp->n_rp_gp_completed++;
 		return 1;
 	}
 
 	/* Has a new RCU grace period started? */
-	if (ACCESS_ONCE(rsp->gpnum) != rdp->gpnum) { /* outside lock */
+	if (ACCESS_ONCE(rnp->gpnum) != rdp->gpnum) { /* outside lock */
 		rdp->n_rp_gp_started++;
 		return 1;
 	}
@@ -1433,6 +1556,21 @@
 	       rcu_preempt_needs_cpu(cpu);
 }
 
+/*
+ * This function is invoked towards the end of the scheduler's initialization
+ * process.  Before this is called, the idle task might contain
+ * RCU read-side critical sections (during which time, this idle
+ * task is booting the system).  After this function is called, the
+ * idle tasks are prohibited from containing RCU read-side critical
+ * sections.
+ */
+void rcu_scheduler_starting(void)
+{
+	WARN_ON(num_online_cpus() != 1);
+	WARN_ON(nr_context_switches() > 0);
+	rcu_scheduler_active = 1;
+}
+
 static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
 static atomic_t rcu_barrier_cpu_count;
 static DEFINE_MUTEX(rcu_barrier_mutex);
@@ -1544,21 +1682,16 @@
 rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable)
 {
 	unsigned long flags;
-	long lastcomp;
 	unsigned long mask;
 	struct rcu_data *rdp = rsp->rda[cpu];
 	struct rcu_node *rnp = rcu_get_root(rsp);
 
 	/* Set up local state, ensuring consistent view of global state. */
 	spin_lock_irqsave(&rnp->lock, flags);
-	lastcomp = rsp->completed;
-	rdp->completed = lastcomp;
-	rdp->gpnum = lastcomp;
 	rdp->passed_quiesc = 0;  /* We could be racing with new GP, */
 	rdp->qs_pending = 1;	 /*  so set up to respond to current GP. */
 	rdp->beenonline = 1;	 /* We have now been online. */
 	rdp->preemptable = preemptable;
-	rdp->passed_quiesc_completed = lastcomp - 1;
 	rdp->qlen_last_fqs_check = 0;
 	rdp->n_force_qs_snap = rsp->n_force_qs;
 	rdp->blimit = blimit;
@@ -1580,6 +1713,11 @@
 		spin_lock(&rnp->lock);	/* irqs already disabled. */
 		rnp->qsmaskinit |= mask;
 		mask = rnp->grpmask;
+		if (rnp == rdp->mynode) {
+			rdp->gpnum = rnp->completed; /* if GP in progress... */
+			rdp->completed = rnp->completed;
+			rdp->passed_quiesc_completed = rnp->completed - 1;
+		}
 		spin_unlock(&rnp->lock); /* irqs already disabled. */
 		rnp = rnp->parent;
 	} while (rnp != NULL && !(rnp->qsmaskinit & mask));
@@ -1597,8 +1735,8 @@
 /*
  * Handle CPU online/offline notification events.
  */
-int __cpuinit rcu_cpu_notify(struct notifier_block *self,
-			     unsigned long action, void *hcpu)
+static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
 {
 	long cpu = (long)hcpu;
 
@@ -1685,8 +1823,8 @@
 		cpustride *= rsp->levelspread[i];
 		rnp = rsp->level[i];
 		for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
-			if (rnp != rcu_get_root(rsp))
-				spin_lock_init(&rnp->lock);
+			spin_lock_init(&rnp->lock);
+			lockdep_set_class(&rnp->lock, &rcu_node_class[i]);
 			rnp->gpnum = 0;
 			rnp->qsmask = 0;
 			rnp->qsmaskinit = 0;
@@ -1707,9 +1845,10 @@
 			rnp->level = i;
 			INIT_LIST_HEAD(&rnp->blocked_tasks[0]);
 			INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
+			INIT_LIST_HEAD(&rnp->blocked_tasks[2]);
+			INIT_LIST_HEAD(&rnp->blocked_tasks[3]);
 		}
 	}
-	spin_lock_init(&rcu_get_root(rsp)->lock);
 }
 
 /*
@@ -1735,16 +1874,30 @@
 	} \
 } while (0)
 
-void __init __rcu_init(void)
+void __init rcu_init(void)
 {
+	int i;
+
 	rcu_bootup_announce();
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 	printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+#if NUM_RCU_LVL_4 != 0
+	printk(KERN_INFO "Experimental four-level hierarchy is enabled.\n");
+#endif /* #if NUM_RCU_LVL_4 != 0 */
 	RCU_INIT_FLAVOR(&rcu_sched_state, rcu_sched_data);
 	RCU_INIT_FLAVOR(&rcu_bh_state, rcu_bh_data);
 	__rcu_init_preempt();
 	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+
+	/*
+	 * We don't need protection against CPU-hotplug here because
+	 * this is called early in boot, before either interrupts
+	 * or the scheduler are operational.
+	 */
+	cpu_notifier(rcu_cpu_notify, 0);
+	for_each_online_cpu(i)
+		rcu_cpu_notify(NULL, CPU_UP_PREPARE, (void *)(long)i);
 }
 
 #include "rcutree_plugin.h"
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 1899023..d2a0046 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -34,10 +34,11 @@
  * In practice, this has not been tested, so there is probably some
  * bug somewhere.
  */
-#define MAX_RCU_LVLS 3
+#define MAX_RCU_LVLS 4
 #define RCU_FANOUT	      (CONFIG_RCU_FANOUT)
 #define RCU_FANOUT_SQ	      (RCU_FANOUT * RCU_FANOUT)
 #define RCU_FANOUT_CUBE	      (RCU_FANOUT_SQ * RCU_FANOUT)
+#define RCU_FANOUT_FOURTH     (RCU_FANOUT_CUBE * RCU_FANOUT)
 
 #if NR_CPUS <= RCU_FANOUT
 #  define NUM_RCU_LVLS	      1
@@ -45,23 +46,33 @@
 #  define NUM_RCU_LVL_1	      (NR_CPUS)
 #  define NUM_RCU_LVL_2	      0
 #  define NUM_RCU_LVL_3	      0
+#  define NUM_RCU_LVL_4	      0
 #elif NR_CPUS <= RCU_FANOUT_SQ
 #  define NUM_RCU_LVLS	      2
 #  define NUM_RCU_LVL_0	      1
 #  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
 #  define NUM_RCU_LVL_2	      (NR_CPUS)
 #  define NUM_RCU_LVL_3	      0
+#  define NUM_RCU_LVL_4	      0
 #elif NR_CPUS <= RCU_FANOUT_CUBE
 #  define NUM_RCU_LVLS	      3
 #  define NUM_RCU_LVL_0	      1
 #  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
 #  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
 #  define NUM_RCU_LVL_3	      NR_CPUS
+#  define NUM_RCU_LVL_4	      0
+#elif NR_CPUS <= RCU_FANOUT_FOURTH
+#  define NUM_RCU_LVLS	      4
+#  define NUM_RCU_LVL_0	      1
+#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_CUBE)
+#  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
+#  define NUM_RCU_LVL_3	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
+#  define NUM_RCU_LVL_4	      NR_CPUS
 #else
 # error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
 #endif /* #if (NR_CPUS) <= RCU_FANOUT */
 
-#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3)
+#define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3 + NUM_RCU_LVL_4)
 #define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
 
 /*
@@ -84,14 +95,21 @@
 	long	gpnum;		/* Current grace period for this node. */
 				/*  This will either be equal to or one */
 				/*  behind the root rcu_node's gpnum. */
+	long	completed;	/* Last grace period completed for this node. */
+				/*  This will either be equal to or one */
+				/*  behind the root rcu_node's gpnum. */
 	unsigned long qsmask;	/* CPUs or groups that need to switch in */
 				/*  order for current grace period to proceed.*/
 				/*  In leaf rcu_node, each bit corresponds to */
 				/*  an rcu_data structure, otherwise, each */
 				/*  bit corresponds to a child rcu_node */
 				/*  structure. */
+	unsigned long expmask;	/* Groups that have ->blocked_tasks[] */
+				/*  elements that need to drain to allow the */
+				/*  current expedited grace period to */
+				/*  complete (only for TREE_PREEMPT_RCU). */
 	unsigned long qsmaskinit;
-				/* Per-GP initialization for qsmask. */
+				/* Per-GP initial value for qsmask & expmask. */
 	unsigned long grpmask;	/* Mask to apply to parent qsmask. */
 				/*  Only one bit will be set in this mask. */
 	int	grplo;		/* lowest-numbered CPU or group here. */
@@ -99,7 +117,7 @@
 	u8	grpnum;		/* CPU/group number for next level up. */
 	u8	level;		/* root is at level 0. */
 	struct rcu_node *parent;
-	struct list_head blocked_tasks[2];
+	struct list_head blocked_tasks[4];
 				/* Tasks blocked in RCU read-side critsect. */
 				/*  Grace period number (->gpnum) x blocked */
 				/*  by tasks on the (x & 0x1) element of the */
@@ -114,6 +132,21 @@
 	for ((rnp) = &(rsp)->node[0]; \
 	     (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
 
+/*
+ * Do a breadth-first scan of the non-leaf rcu_node structures for the
+ * specified rcu_state structure.  Note that if there is a singleton
+ * rcu_node tree with but one rcu_node structure, this loop is a no-op.
+ */
+#define rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) \
+	for ((rnp) = &(rsp)->node[0]; \
+	     (rnp) < (rsp)->level[NUM_RCU_LVLS - 1]; (rnp)++)
+
+/*
+ * Scan the leaves of the rcu_node hierarchy for the specified rcu_state
+ * structure.  Note that if there is a singleton rcu_node tree with but
+ * one rcu_node structure, this loop -will- visit the rcu_node structure.
+ * It is still a leaf node, even if it is also the root node.
+ */
 #define rcu_for_each_leaf_node(rsp, rnp) \
 	for ((rnp) = (rsp)->level[NUM_RCU_LVLS - 1]; \
 	     (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
@@ -204,11 +237,12 @@
 #define RCU_GP_IDLE		0	/* No grace period in progress. */
 #define RCU_GP_INIT		1	/* Grace period being initialized. */
 #define RCU_SAVE_DYNTICK	2	/* Need to scan dyntick state. */
-#define RCU_FORCE_QS		3	/* Need to force quiescent state. */
+#define RCU_SAVE_COMPLETED	3	/* Need to save rsp->completed. */
+#define RCU_FORCE_QS		4	/* Need to force quiescent state. */
 #ifdef CONFIG_NO_HZ
 #define RCU_SIGNAL_INIT		RCU_SAVE_DYNTICK
 #else /* #ifdef CONFIG_NO_HZ */
-#define RCU_SIGNAL_INIT		RCU_FORCE_QS
+#define RCU_SIGNAL_INIT		RCU_SAVE_COMPLETED
 #endif /* #else #ifdef CONFIG_NO_HZ */
 
 #define RCU_JIFFIES_TILL_FORCE_QS	 3	/* for rsp->jiffies_force_qs */
@@ -246,7 +280,7 @@
 	long	gpnum;				/* Current gp number. */
 	long	completed;			/* # of last completed gp. */
 
-	/* End  of fields guarded by root rcu_node's lock. */
+	/* End of fields guarded by root rcu_node's lock. */
 
 	spinlock_t onofflock;			/* exclude on/offline and */
 						/*  starting new GP.  Also */
@@ -260,6 +294,8 @@
 	long orphan_qlen;			/* Number of orphaned cbs. */
 	spinlock_t fqslock;			/* Only one task forcing */
 						/*  quiescent states. */
+	long	completed_fqs;			/* Value of completed @ snap. */
+						/*  Protected by fqslock. */
 	unsigned long jiffies_force_qs;		/* Time at which to invoke */
 						/*  force_quiescent_state(). */
 	unsigned long n_force_qs;		/* Number of calls to */
@@ -274,11 +310,15 @@
 	unsigned long jiffies_stall;		/* Time at which to check */
 						/*  for CPU stalls. */
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
-#ifdef CONFIG_NO_HZ
-	long dynticks_completed;		/* Value of completed @ snap. */
-#endif /* #ifdef CONFIG_NO_HZ */
 };
 
+/* Return values for rcu_preempt_offline_tasks(). */
+
+#define RCU_OFL_TASKS_NORM_GP	0x1		/* Tasks blocking normal */
+						/*  GP were moved to root. */
+#define RCU_OFL_TASKS_EXP_GP	0x2		/* Tasks blocking expedited */
+						/*  GP were moved to root. */
+
 #ifdef RCU_TREE_NONCORE
 
 /*
@@ -298,10 +338,14 @@
 #else /* #ifdef RCU_TREE_NONCORE */
 
 /* Forward declarations for rcutree_plugin.h */
-static inline void rcu_bootup_announce(void);
+static void rcu_bootup_announce(void);
 long rcu_batches_completed(void);
 static void rcu_preempt_note_context_switch(int cpu);
 static int rcu_preempted_readers(struct rcu_node *rnp);
+#ifdef CONFIG_HOTPLUG_CPU
+static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
+				      unsigned long flags);
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 static void rcu_print_task_stall(struct rcu_node *rnp);
 #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
@@ -315,6 +359,9 @@
 static void rcu_preempt_check_callbacks(int cpu);
 static void rcu_preempt_process_callbacks(void);
 void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU)
+static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp);
+#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU) */
 static int rcu_preempt_pending(int cpu);
 static int rcu_preempt_needs_cpu(int cpu);
 static void __cpuinit rcu_preempt_init_percpu_data(int cpu);
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index ef2a58c..37fbccd 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -24,16 +24,19 @@
  *	   Paul E. McKenney <paulmck@linux.vnet.ibm.com>
  */
 
+#include <linux/delay.h>
 
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
 struct rcu_state rcu_preempt_state = RCU_STATE_INITIALIZER(rcu_preempt_state);
 DEFINE_PER_CPU(struct rcu_data, rcu_preempt_data);
 
+static int rcu_preempted_readers_exp(struct rcu_node *rnp);
+
 /*
  * Tell them what RCU they are running.
  */
-static inline void rcu_bootup_announce(void)
+static void __init rcu_bootup_announce(void)
 {
 	printk(KERN_INFO
 	       "Experimental preemptable hierarchical RCU implementation.\n");
@@ -67,7 +70,7 @@
 static void rcu_preempt_qs(int cpu)
 {
 	struct rcu_data *rdp = &per_cpu(rcu_preempt_data, cpu);
-	rdp->passed_quiesc_completed = rdp->completed;
+	rdp->passed_quiesc_completed = rdp->gpnum - 1;
 	barrier();
 	rdp->passed_quiesc = 1;
 }
@@ -157,14 +160,58 @@
  */
 static int rcu_preempted_readers(struct rcu_node *rnp)
 {
-	return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+	int phase = rnp->gpnum & 0x1;
+
+	return !list_empty(&rnp->blocked_tasks[phase]) ||
+	       !list_empty(&rnp->blocked_tasks[phase + 2]);
 }
 
+/*
+ * Record a quiescent state for all tasks that were previously queued
+ * on the specified rcu_node structure and that were blocking the current
+ * RCU grace period.  The caller must hold the specified rnp->lock with
+ * irqs disabled, and this lock is released upon return, but irqs remain
+ * disabled.
+ */
+static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
+	__releases(rnp->lock)
+{
+	unsigned long mask;
+	struct rcu_node *rnp_p;
+
+	if (rnp->qsmask != 0 || rcu_preempted_readers(rnp)) {
+		spin_unlock_irqrestore(&rnp->lock, flags);
+		return;  /* Still need more quiescent states! */
+	}
+
+	rnp_p = rnp->parent;
+	if (rnp_p == NULL) {
+		/*
+		 * Either there is only one rcu_node in the tree,
+		 * or tasks were kicked up to root rcu_node due to
+		 * CPUs going offline.
+		 */
+		rcu_report_qs_rsp(&rcu_preempt_state, flags);
+		return;
+	}
+
+	/* Report up the rest of the hierarchy. */
+	mask = rnp->grpmask;
+	spin_unlock(&rnp->lock);	/* irqs remain disabled. */
+	spin_lock(&rnp_p->lock);	/* irqs already disabled. */
+	rcu_report_qs_rnp(mask, &rcu_preempt_state, rnp_p, flags);
+}
+
+/*
+ * Handle special cases during rcu_read_unlock(), such as needing to
+ * notify RCU core processing or task having blocked during the RCU
+ * read-side critical section.
+ */
 static void rcu_read_unlock_special(struct task_struct *t)
 {
 	int empty;
+	int empty_exp;
 	unsigned long flags;
-	unsigned long mask;
 	struct rcu_node *rnp;
 	int special;
 
@@ -207,36 +254,30 @@
 			spin_unlock(&rnp->lock);  /* irqs remain disabled. */
 		}
 		empty = !rcu_preempted_readers(rnp);
+		empty_exp = !rcu_preempted_readers_exp(rnp);
+		smp_mb(); /* ensure expedited fastpath sees end of RCU c-s. */
 		list_del_init(&t->rcu_node_entry);
 		t->rcu_blocked_node = NULL;
 
 		/*
 		 * If this was the last task on the current list, and if
 		 * we aren't waiting on any CPUs, report the quiescent state.
-		 * Note that both cpu_quiet_msk_finish() and cpu_quiet_msk()
-		 * drop rnp->lock and restore irq.
+		 * Note that rcu_report_unblock_qs_rnp() releases rnp->lock.
 		 */
-		if (!empty && rnp->qsmask == 0 &&
-		    !rcu_preempted_readers(rnp)) {
-			struct rcu_node *rnp_p;
-
-			if (rnp->parent == NULL) {
-				/* Only one rcu_node in the tree. */
-				cpu_quiet_msk_finish(&rcu_preempt_state, flags);
-				return;
-			}
-			/* Report up the rest of the hierarchy. */
-			mask = rnp->grpmask;
+		if (empty)
 			spin_unlock_irqrestore(&rnp->lock, flags);
-			rnp_p = rnp->parent;
-			spin_lock_irqsave(&rnp_p->lock, flags);
-			WARN_ON_ONCE(rnp->qsmask);
-			cpu_quiet_msk(mask, &rcu_preempt_state, rnp_p, flags);
-			return;
-		}
-		spin_unlock(&rnp->lock);
+		else
+			rcu_report_unblock_qs_rnp(rnp, flags);
+
+		/*
+		 * If this was the last task on the expedited lists,
+		 * then we need to report up the rcu_node hierarchy.
+		 */
+		if (!empty_exp && !rcu_preempted_readers_exp(rnp))
+			rcu_report_exp_rnp(&rcu_preempt_state, rnp);
+	} else {
+		local_irq_restore(flags);
 	}
-	local_irq_restore(flags);
 }
 
 /*
@@ -303,6 +344,8 @@
  * rcu_node.  The reason for not just moving them to the immediate
  * parent is to remove the need for rcu_read_unlock_special() to
  * make more than two attempts to acquire the target rcu_node's lock.
+ * Returns true if there were tasks blocking the current RCU grace
+ * period.
  *
  * Returns 1 if there was previously a task blocking the current grace
  * period on the specified rcu_node structure.
@@ -316,7 +359,7 @@
 	int i;
 	struct list_head *lp;
 	struct list_head *lp_root;
-	int retval = rcu_preempted_readers(rnp);
+	int retval = 0;
 	struct rcu_node *rnp_root = rcu_get_root(rsp);
 	struct task_struct *tp;
 
@@ -326,7 +369,9 @@
 	}
 	WARN_ON_ONCE(rnp != rdp->mynode &&
 		     (!list_empty(&rnp->blocked_tasks[0]) ||
-		      !list_empty(&rnp->blocked_tasks[1])));
+		      !list_empty(&rnp->blocked_tasks[1]) ||
+		      !list_empty(&rnp->blocked_tasks[2]) ||
+		      !list_empty(&rnp->blocked_tasks[3])));
 
 	/*
 	 * Move tasks up to root rcu_node.  Rely on the fact that the
@@ -334,7 +379,11 @@
 	 * rcu_nodes in terms of gp_num value.  This fact allows us to
 	 * move the blocked_tasks[] array directly, element by element.
 	 */
-	for (i = 0; i < 2; i++) {
+	if (rcu_preempted_readers(rnp))
+		retval |= RCU_OFL_TASKS_NORM_GP;
+	if (rcu_preempted_readers_exp(rnp))
+		retval |= RCU_OFL_TASKS_EXP_GP;
+	for (i = 0; i < 4; i++) {
 		lp = &rnp->blocked_tasks[i];
 		lp_root = &rnp_root->blocked_tasks[i];
 		while (!list_empty(lp)) {
@@ -346,7 +395,6 @@
 			spin_unlock(&rnp_root->lock); /* irqs remain disabled */
 		}
 	}
-
 	return retval;
 }
 
@@ -398,14 +446,183 @@
 }
 EXPORT_SYMBOL_GPL(call_rcu);
 
+/**
+ * synchronize_rcu - wait until a grace period has elapsed.
+ *
+ * Control will return to the caller some time after a full grace
+ * period has elapsed, in other words after all currently executing RCU
+ * read-side critical sections have completed.  RCU read-side critical
+ * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
+ * and may be nested.
+ */
+void synchronize_rcu(void)
+{
+	struct rcu_synchronize rcu;
+
+	if (!rcu_scheduler_active)
+		return;
+
+	init_completion(&rcu.completion);
+	/* Will wake me after RCU finished. */
+	call_rcu(&rcu.head, wakeme_after_rcu);
+	/* Wait for it. */
+	wait_for_completion(&rcu.completion);
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu);
+
+static DECLARE_WAIT_QUEUE_HEAD(sync_rcu_preempt_exp_wq);
+static long sync_rcu_preempt_exp_count;
+static DEFINE_MUTEX(sync_rcu_preempt_exp_mutex);
+
 /*
- * Wait for an rcu-preempt grace period.  We are supposed to expedite the
- * grace period, but this is the crude slow compatability hack, so just
- * invoke synchronize_rcu().
+ * Return non-zero if there are any tasks in RCU read-side critical
+ * sections blocking the current preemptible-RCU expedited grace period.
+ * If there is no preemptible-RCU expedited grace period currently in
+ * progress, returns zero unconditionally.
+ */
+static int rcu_preempted_readers_exp(struct rcu_node *rnp)
+{
+	return !list_empty(&rnp->blocked_tasks[2]) ||
+	       !list_empty(&rnp->blocked_tasks[3]);
+}
+
+/*
+ * return non-zero if there is no RCU expedited grace period in progress
+ * for the specified rcu_node structure, in other words, if all CPUs and
+ * tasks covered by the specified rcu_node structure have done their bit
+ * for the current expedited grace period.  Works only for preemptible
+ * RCU -- other RCU implementation use other means.
+ *
+ * Caller must hold sync_rcu_preempt_exp_mutex.
+ */
+static int sync_rcu_preempt_exp_done(struct rcu_node *rnp)
+{
+	return !rcu_preempted_readers_exp(rnp) &&
+	       ACCESS_ONCE(rnp->expmask) == 0;
+}
+
+/*
+ * Report the exit from RCU read-side critical section for the last task
+ * that queued itself during or before the current expedited preemptible-RCU
+ * grace period.  This event is reported either to the rcu_node structure on
+ * which the task was queued or to one of that rcu_node structure's ancestors,
+ * recursively up the tree.  (Calm down, calm down, we do the recursion
+ * iteratively!)
+ *
+ * Caller must hold sync_rcu_preempt_exp_mutex.
+ */
+static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp)
+{
+	unsigned long flags;
+	unsigned long mask;
+
+	spin_lock_irqsave(&rnp->lock, flags);
+	for (;;) {
+		if (!sync_rcu_preempt_exp_done(rnp))
+			break;
+		if (rnp->parent == NULL) {
+			wake_up(&sync_rcu_preempt_exp_wq);
+			break;
+		}
+		mask = rnp->grpmask;
+		spin_unlock(&rnp->lock); /* irqs remain disabled */
+		rnp = rnp->parent;
+		spin_lock(&rnp->lock); /* irqs already disabled */
+		rnp->expmask &= ~mask;
+	}
+	spin_unlock_irqrestore(&rnp->lock, flags);
+}
+
+/*
+ * Snapshot the tasks blocking the newly started preemptible-RCU expedited
+ * grace period for the specified rcu_node structure.  If there are no such
+ * tasks, report it up the rcu_node hierarchy.
+ *
+ * Caller must hold sync_rcu_preempt_exp_mutex and rsp->onofflock.
+ */
+static void
+sync_rcu_preempt_exp_init(struct rcu_state *rsp, struct rcu_node *rnp)
+{
+	int must_wait;
+
+	spin_lock(&rnp->lock); /* irqs already disabled */
+	list_splice_init(&rnp->blocked_tasks[0], &rnp->blocked_tasks[2]);
+	list_splice_init(&rnp->blocked_tasks[1], &rnp->blocked_tasks[3]);
+	must_wait = rcu_preempted_readers_exp(rnp);
+	spin_unlock(&rnp->lock); /* irqs remain disabled */
+	if (!must_wait)
+		rcu_report_exp_rnp(rsp, rnp);
+}
+
+/*
+ * Wait for an rcu-preempt grace period, but expedite it.  The basic idea
+ * is to invoke synchronize_sched_expedited() to push all the tasks to
+ * the ->blocked_tasks[] lists, move all entries from the first set of
+ * ->blocked_tasks[] lists to the second set, and finally wait for this
+ * second set to drain.
  */
 void synchronize_rcu_expedited(void)
 {
-	synchronize_rcu();
+	unsigned long flags;
+	struct rcu_node *rnp;
+	struct rcu_state *rsp = &rcu_preempt_state;
+	long snap;
+	int trycount = 0;
+
+	smp_mb(); /* Caller's modifications seen first by other CPUs. */
+	snap = ACCESS_ONCE(sync_rcu_preempt_exp_count) + 1;
+	smp_mb(); /* Above access cannot bleed into critical section. */
+
+	/*
+	 * Acquire lock, falling back to synchronize_rcu() if too many
+	 * lock-acquisition failures.  Of course, if someone does the
+	 * expedited grace period for us, just leave.
+	 */
+	while (!mutex_trylock(&sync_rcu_preempt_exp_mutex)) {
+		if (trycount++ < 10)
+			udelay(trycount * num_online_cpus());
+		else {
+			synchronize_rcu();
+			return;
+		}
+		if ((ACCESS_ONCE(sync_rcu_preempt_exp_count) - snap) > 0)
+			goto mb_ret; /* Others did our work for us. */
+	}
+	if ((ACCESS_ONCE(sync_rcu_preempt_exp_count) - snap) > 0)
+		goto unlock_mb_ret; /* Others did our work for us. */
+
+	/* force all RCU readers onto blocked_tasks[]. */
+	synchronize_sched_expedited();
+
+	spin_lock_irqsave(&rsp->onofflock, flags);
+
+	/* Initialize ->expmask for all non-leaf rcu_node structures. */
+	rcu_for_each_nonleaf_node_breadth_first(rsp, rnp) {
+		spin_lock(&rnp->lock); /* irqs already disabled. */
+		rnp->expmask = rnp->qsmaskinit;
+		spin_unlock(&rnp->lock); /* irqs remain disabled. */
+	}
+
+	/* Snapshot current state of ->blocked_tasks[] lists. */
+	rcu_for_each_leaf_node(rsp, rnp)
+		sync_rcu_preempt_exp_init(rsp, rnp);
+	if (NUM_RCU_NODES > 1)
+		sync_rcu_preempt_exp_init(rsp, rcu_get_root(rsp));
+
+	spin_unlock_irqrestore(&rsp->onofflock, flags);
+
+	/* Wait for snapshotted ->blocked_tasks[] lists to drain. */
+	rnp = rcu_get_root(rsp);
+	wait_event(sync_rcu_preempt_exp_wq,
+		   sync_rcu_preempt_exp_done(rnp));
+
+	/* Clean up and exit. */
+	smp_mb(); /* ensure expedited GP seen before counter increment. */
+	ACCESS_ONCE(sync_rcu_preempt_exp_count)++;
+unlock_mb_ret:
+	mutex_unlock(&sync_rcu_preempt_exp_mutex);
+mb_ret:
+	smp_mb(); /* ensure subsequent action seen after grace period. */
 }
 EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
 
@@ -481,7 +698,7 @@
 /*
  * Tell them what RCU they are running.
  */
-static inline void rcu_bootup_announce(void)
+static void __init rcu_bootup_announce(void)
 {
 	printk(KERN_INFO "Hierarchical RCU implementation.\n");
 }
@@ -512,6 +729,16 @@
 	return 0;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+
+/* Because preemptible RCU does not exist, no quieting of tasks. */
+static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp, unsigned long flags)
+{
+	spin_unlock_irqrestore(&rnp->lock, flags);
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
 #ifdef CONFIG_RCU_CPU_STALL_DETECTOR
 
 /*
@@ -594,6 +821,20 @@
 }
 EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
 
+#ifdef CONFIG_HOTPLUG_CPU
+
+/*
+ * Because preemptable RCU does not exist, there is never any need to
+ * report on tasks preempted in RCU read-side critical sections during
+ * expedited RCU grace periods.
+ */
+static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp)
+{
+	return;
+}
+
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+
 /*
  * Because preemptable RCU does not exist, it never has any work to do.
  */
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index 4b31c77..9d2c884 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -155,12 +155,15 @@
 
 static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 {
+	long gpnum;
 	int level = 0;
+	int phase;
 	struct rcu_node *rnp;
 
+	gpnum = rsp->gpnum;
 	seq_printf(m, "c=%ld g=%ld s=%d jfq=%ld j=%x "
 		      "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld\n",
-		   rsp->completed, rsp->gpnum, rsp->signaled,
+		   rsp->completed, gpnum, rsp->signaled,
 		   (long)(rsp->jiffies_force_qs - jiffies),
 		   (int)(jiffies & 0xffff),
 		   rsp->n_force_qs, rsp->n_force_qs_ngp,
@@ -171,8 +174,13 @@
 			seq_puts(m, "\n");
 			level = rnp->level;
 		}
-		seq_printf(m, "%lx/%lx %d:%d ^%d    ",
+		phase = gpnum & 0x1;
+		seq_printf(m, "%lx/%lx %c%c>%c%c %d:%d ^%d    ",
 			   rnp->qsmask, rnp->qsmaskinit,
+			   "T."[list_empty(&rnp->blocked_tasks[phase])],
+			   "E."[list_empty(&rnp->blocked_tasks[phase + 2])],
+			   "T."[list_empty(&rnp->blocked_tasks[!phase])],
+			   "E."[list_empty(&rnp->blocked_tasks[!phase + 2])],
 			   rnp->grplo, rnp->grphi, rnp->grpnum);
 	}
 	seq_puts(m, "\n");
diff --git a/kernel/sched.c b/kernel/sched.c
index 3c11ae0..e7f2cfa 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -535,14 +535,12 @@
 	#define CPU_LOAD_IDX_MAX 5
 	unsigned long cpu_load[CPU_LOAD_IDX_MAX];
 #ifdef CONFIG_NO_HZ
-	unsigned long last_tick_seen;
 	unsigned char in_nohz_recently;
 #endif
 	/* capture load from *all* tasks on this cpu: */
 	struct load_weight load;
 	unsigned long nr_load_updates;
 	u64 nr_switches;
-	u64 nr_migrations_in;
 
 	struct cfs_rq cfs;
 	struct rt_rq rt;
@@ -591,6 +589,8 @@
 
 	u64 rt_avg;
 	u64 age_stamp;
+	u64 idle_stamp;
+	u64 avg_idle;
 #endif
 
 	/* calc_load related fields */
@@ -772,7 +772,7 @@
 	if (!sched_feat_names[i])
 		return -EINVAL;
 
-	filp->f_pos += cnt;
+	*ppos += cnt;
 
 	return cnt;
 }
@@ -2017,6 +2017,7 @@
 	}
 
 	spin_lock_irqsave(&rq->lock, flags);
+	update_rq_clock(rq);
 	set_task_cpu(p, cpu);
 	p->cpus_allowed = cpumask_of_cpu(cpu);
 	p->rt.nr_cpus_allowed = 1;
@@ -2078,7 +2079,6 @@
 #endif
 	if (old_cpu != new_cpu) {
 		p->se.nr_migrations++;
-		new_rq->nr_migrations_in++;
 #ifdef CONFIG_SCHEDSTATS
 		if (task_hot(p, old_rq->clock, NULL))
 			schedstat_inc(p, se.nr_forced2_migrations);
@@ -2115,6 +2115,7 @@
 	 * it is sufficient to simply update the task's cpu field.
 	 */
 	if (!p->se.on_rq && !task_running(rq, p)) {
+		update_rq_clock(rq);
 		set_task_cpu(p, dest_cpu);
 		return 0;
 	}
@@ -2376,13 +2377,14 @@
 	task_rq_unlock(rq, &flags);
 
 	cpu = p->sched_class->select_task_rq(p, SD_BALANCE_WAKE, wake_flags);
-	if (cpu != orig_cpu)
-		set_task_cpu(p, cpu);
-
-	rq = task_rq_lock(p, &flags);
-
-	if (rq != orig_rq)
+	if (cpu != orig_cpu) {
+		local_irq_save(flags);
+		rq = cpu_rq(cpu);
 		update_rq_clock(rq);
+		set_task_cpu(p, cpu);
+		local_irq_restore(flags);
+	}
+	rq = task_rq_lock(p, &flags);
 
 	WARN_ON(p->state != TASK_WAKING);
 	cpu = task_cpu(p);
@@ -2440,6 +2442,17 @@
 #ifdef CONFIG_SMP
 	if (p->sched_class->task_wake_up)
 		p->sched_class->task_wake_up(rq, p);
+
+	if (unlikely(rq->idle_stamp)) {
+		u64 delta = rq->clock - rq->idle_stamp;
+		u64 max = 2*sysctl_sched_migration_cost;
+
+		if (delta > max)
+			rq->avg_idle = max;
+		else
+			update_avg(&rq->avg_idle, delta);
+		rq->idle_stamp = 0;
+	}
 #endif
 out:
 	task_rq_unlock(rq, &flags);
@@ -2545,6 +2558,7 @@
 void sched_fork(struct task_struct *p, int clone_flags)
 {
 	int cpu = get_cpu();
+	unsigned long flags;
 
 	__sched_fork(p);
 
@@ -2581,7 +2595,10 @@
 #ifdef CONFIG_SMP
 	cpu = p->sched_class->select_task_rq(p, SD_BALANCE_FORK, 0);
 #endif
+	local_irq_save(flags);
+	update_rq_clock(cpu_rq(cpu));
 	set_task_cpu(p, cpu);
+	local_irq_restore(flags);
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	if (likely(sched_info_on()))
@@ -2848,14 +2865,14 @@
 	 */
 	arch_start_context_switch(prev);
 
-	if (unlikely(!mm)) {
+	if (likely(!mm)) {
 		next->active_mm = oldmm;
 		atomic_inc(&oldmm->mm_count);
 		enter_lazy_tlb(oldmm, next);
 	} else
 		switch_mm(oldmm, mm, next);
 
-	if (unlikely(!prev->mm)) {
+	if (likely(!prev->mm)) {
 		prev->active_mm = NULL;
 		rq->prev_mm = oldmm;
 	}
@@ -3018,15 +3035,6 @@
 }
 
 /*
- * Externally visible per-cpu scheduler statistics:
- * cpu_nr_migrations(cpu) - number of migrations into that cpu
- */
-u64 cpu_nr_migrations(int cpu)
-{
-	return cpu_rq(cpu)->nr_migrations_in;
-}
-
-/*
  * Update rq->cpu_load[] statistics. This function is usually called every
  * scheduler tick (TICK_NSEC).
  */
@@ -4126,7 +4134,7 @@
 	unsigned long flags;
 	struct cpumask *cpus = __get_cpu_var(load_balance_tmpmask);
 
-	cpumask_setall(cpus);
+	cpumask_copy(cpus, cpu_online_mask);
 
 	/*
 	 * When power savings policy is enabled for the parent domain, idle
@@ -4289,7 +4297,7 @@
 	int all_pinned = 0;
 	struct cpumask *cpus = __get_cpu_var(load_balance_tmpmask);
 
-	cpumask_setall(cpus);
+	cpumask_copy(cpus, cpu_online_mask);
 
 	/*
 	 * When power savings policy is enabled for the parent domain, idle
@@ -4429,6 +4437,11 @@
 	int pulled_task = 0;
 	unsigned long next_balance = jiffies + HZ;
 
+	this_rq->idle_stamp = this_rq->clock;
+
+	if (this_rq->avg_idle < sysctl_sched_migration_cost)
+		return;
+
 	for_each_domain(this_cpu, sd) {
 		unsigned long interval;
 
@@ -4443,8 +4456,10 @@
 		interval = msecs_to_jiffies(sd->balance_interval);
 		if (time_after(next_balance, sd->last_balance + interval))
 			next_balance = sd->last_balance + interval;
-		if (pulled_task)
+		if (pulled_task) {
+			this_rq->idle_stamp = 0;
 			break;
+		}
 	}
 	if (pulled_task || time_after(jiffies, this_rq->next_balance)) {
 		/*
@@ -5046,8 +5061,13 @@
 	p->gtime = cputime_add(p->gtime, cputime);
 
 	/* Add guest time to cpustat. */
-	cpustat->user = cputime64_add(cpustat->user, tmp);
-	cpustat->guest = cputime64_add(cpustat->guest, tmp);
+	if (TASK_NICE(p) > 0) {
+		cpustat->nice = cputime64_add(cpustat->nice, tmp);
+		cpustat->guest_nice = cputime64_add(cpustat->guest_nice, tmp);
+	} else {
+		cpustat->user = cputime64_add(cpustat->user, tmp);
+		cpustat->guest = cputime64_add(cpustat->guest, tmp);
+	}
 }
 
 /*
@@ -5162,61 +5182,87 @@
  * Use precise platform statistics if available:
  */
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
-cputime_t task_utime(struct task_struct *p)
+void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 {
-	return p->utime;
+	*ut = p->utime;
+	*st = p->stime;
 }
 
-cputime_t task_stime(struct task_struct *p)
+void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 {
-	return p->stime;
+	struct task_cputime cputime;
+
+	thread_group_cputime(p, &cputime);
+
+	*ut = cputime.utime;
+	*st = cputime.stime;
 }
 #else
-cputime_t task_utime(struct task_struct *p)
+
+#ifndef nsecs_to_cputime
+# define nsecs_to_cputime(__nsecs)	nsecs_to_jiffies(__nsecs)
+#endif
+
+void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 {
-	clock_t utime = cputime_to_clock_t(p->utime),
-		total = utime + cputime_to_clock_t(p->stime);
-	u64 temp;
+	cputime_t rtime, utime = p->utime, total = cputime_add(utime, p->stime);
 
 	/*
 	 * Use CFS's precise accounting:
 	 */
-	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
+	rtime = nsecs_to_cputime(p->se.sum_exec_runtime);
 
 	if (total) {
-		temp *= utime;
+		u64 temp;
+
+		temp = (u64)(rtime * utime);
 		do_div(temp, total);
-	}
-	utime = (clock_t)temp;
-
-	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
-	return p->prev_utime;
-}
-
-cputime_t task_stime(struct task_struct *p)
-{
-	clock_t stime;
+		utime = (cputime_t)temp;
+	} else
+		utime = rtime;
 
 	/*
-	 * Use CFS's precise accounting. (we subtract utime from
-	 * the total, to make sure the total observed by userspace
-	 * grows monotonically - apps rely on that):
+	 * Compare with previous values, to keep monotonicity:
 	 */
-	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
-			cputime_to_clock_t(task_utime(p));
+	p->prev_utime = max(p->prev_utime, utime);
+	p->prev_stime = max(p->prev_stime, cputime_sub(rtime, p->prev_utime));
 
-	if (stime >= 0)
-		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+	*ut = p->prev_utime;
+	*st = p->prev_stime;
+}
 
-	return p->prev_stime;
+/*
+ * Must be called with siglock held.
+ */
+void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
+{
+	struct signal_struct *sig = p->signal;
+	struct task_cputime cputime;
+	cputime_t rtime, utime, total;
+
+	thread_group_cputime(p, &cputime);
+
+	total = cputime_add(cputime.utime, cputime.stime);
+	rtime = nsecs_to_cputime(cputime.sum_exec_runtime);
+
+	if (total) {
+		u64 temp;
+
+		temp = (u64)(rtime * cputime.utime);
+		do_div(temp, total);
+		utime = (cputime_t)temp;
+	} else
+		utime = rtime;
+
+	sig->prev_utime = max(sig->prev_utime, utime);
+	sig->prev_stime = max(sig->prev_stime,
+			      cputime_sub(rtime, sig->prev_utime));
+
+	*ut = sig->prev_utime;
+	*st = sig->prev_stime;
 }
 #endif
 
-inline cputime_t task_gtime(struct task_struct *p)
-{
-	return p->gtime;
-}
-
 /*
  * This function gets called by the timer code, with HZ frequency.
  * We call it with interrupts disabled.
@@ -5481,7 +5527,7 @@
 }
 EXPORT_SYMBOL(schedule);
 
-#ifdef CONFIG_SMP
+#ifdef CONFIG_MUTEX_SPIN_ON_OWNER
 /*
  * Look out! "owner" is an entirely speculative pointer
  * access and not reliable.
@@ -6175,22 +6221,14 @@
 	BUG_ON(p->se.on_rq);
 
 	p->policy = policy;
-	switch (p->policy) {
-	case SCHED_NORMAL:
-	case SCHED_BATCH:
-	case SCHED_IDLE:
-		p->sched_class = &fair_sched_class;
-		break;
-	case SCHED_FIFO:
-	case SCHED_RR:
-		p->sched_class = &rt_sched_class;
-		break;
-	}
-
 	p->rt_priority = prio;
 	p->normal_prio = normal_prio(p);
 	/* we are holding p->pi_lock already */
 	p->prio = rt_mutex_getprio(p);
+	if (rt_prio(p->prio))
+		p->sched_class = &rt_sched_class;
+	else
+		p->sched_class = &fair_sched_class;
 	set_load_weight(p);
 }
 
@@ -6935,7 +6973,7 @@
 	/*
 	 * Only show locks if all tasks are dumped:
 	 */
-	if (state_filter == -1)
+	if (!state_filter)
 		debug_show_all_locks();
 }
 
@@ -7406,17 +7444,16 @@
 		.procname	= "sched_domain",
 		.mode		= 0555,
 	},
-	{0, },
+	{}
 };
 
 static struct ctl_table sd_ctl_root[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= sd_ctl_dir,
 	},
-	{0, },
+	{}
 };
 
 static struct ctl_table *sd_alloc_ctl_entry(int n)
@@ -7740,6 +7777,16 @@
 
 #ifdef CONFIG_SCHED_DEBUG
 
+static __read_mostly int sched_domain_debug_enabled;
+
+static int __init sched_domain_debug_setup(char *str)
+{
+	sched_domain_debug_enabled = 1;
+
+	return 0;
+}
+early_param("sched_debug", sched_domain_debug_setup);
+
 static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level,
 				  struct cpumask *groupmask)
 {
@@ -7826,6 +7873,9 @@
 	cpumask_var_t groupmask;
 	int level = 0;
 
+	if (!sched_domain_debug_enabled)
+		return;
+
 	if (!sd) {
 		printk(KERN_DEBUG "CPU%d attaching NULL sched-domain.\n", cpu);
 		return;
@@ -7905,6 +7955,8 @@
 
 static void free_rootdomain(struct root_domain *rd)
 {
+	synchronize_sched();
+
 	cpupri_cleanup(&rd->cpupri);
 
 	free_cpumask_var(rd->rto_mask);
@@ -8045,6 +8097,7 @@
 /* Setup the mask of cpus configured for isolated domains */
 static int __init isolated_cpu_setup(char *str)
 {
+	alloc_bootmem_cpumask_var(&cpu_isolated_map);
 	cpulist_parse(str, cpu_isolated_map);
 	return 1;
 }
@@ -8881,7 +8934,7 @@
 	return __build_sched_domains(cpu_map, NULL);
 }
 
-static struct cpumask *doms_cur;	/* current sched domains */
+static cpumask_var_t *doms_cur;	/* current sched domains */
 static int ndoms_cur;		/* number of sched domains in 'doms_cur' */
 static struct sched_domain_attr *dattr_cur;
 				/* attribues of custom domains in 'doms_cur' */
@@ -8903,6 +8956,31 @@
 	return 0;
 }
 
+cpumask_var_t *alloc_sched_domains(unsigned int ndoms)
+{
+	int i;
+	cpumask_var_t *doms;
+
+	doms = kmalloc(sizeof(*doms) * ndoms, GFP_KERNEL);
+	if (!doms)
+		return NULL;
+	for (i = 0; i < ndoms; i++) {
+		if (!alloc_cpumask_var(&doms[i], GFP_KERNEL)) {
+			free_sched_domains(doms, i);
+			return NULL;
+		}
+	}
+	return doms;
+}
+
+void free_sched_domains(cpumask_var_t doms[], unsigned int ndoms)
+{
+	unsigned int i;
+	for (i = 0; i < ndoms; i++)
+		free_cpumask_var(doms[i]);
+	kfree(doms);
+}
+
 /*
  * Set up scheduler domains and groups. Callers must hold the hotplug lock.
  * For now this just excludes isolated cpus, but could be used to
@@ -8914,12 +8992,12 @@
 
 	arch_update_cpu_topology();
 	ndoms_cur = 1;
-	doms_cur = kmalloc(cpumask_size(), GFP_KERNEL);
+	doms_cur = alloc_sched_domains(ndoms_cur);
 	if (!doms_cur)
-		doms_cur = fallback_doms;
-	cpumask_andnot(doms_cur, cpu_map, cpu_isolated_map);
+		doms_cur = &fallback_doms;
+	cpumask_andnot(doms_cur[0], cpu_map, cpu_isolated_map);
 	dattr_cur = NULL;
-	err = build_sched_domains(doms_cur);
+	err = build_sched_domains(doms_cur[0]);
 	register_sched_domain_sysctl();
 
 	return err;
@@ -8969,19 +9047,19 @@
  * doms_new[] to the current sched domain partitioning, doms_cur[].
  * It destroys each deleted domain and builds each new domain.
  *
- * 'doms_new' is an array of cpumask's of length 'ndoms_new'.
+ * 'doms_new' is an array of cpumask_var_t's of length 'ndoms_new'.
  * The masks don't intersect (don't overlap.) We should setup one
  * sched domain for each mask. CPUs not in any of the cpumasks will
  * not be load balanced. If the same cpumask appears both in the
  * current 'doms_cur' domains and in the new 'doms_new', we can leave
  * it as it is.
  *
- * The passed in 'doms_new' should be kmalloc'd. This routine takes
- * ownership of it and will kfree it when done with it. If the caller
- * failed the kmalloc call, then it can pass in doms_new == NULL &&
- * ndoms_new == 1, and partition_sched_domains() will fallback to
- * the single partition 'fallback_doms', it also forces the domains
- * to be rebuilt.
+ * The passed in 'doms_new' should be allocated using
+ * alloc_sched_domains.  This routine takes ownership of it and will
+ * free_sched_domains it when done with it. If the caller failed the
+ * alloc call, then it can pass in doms_new == NULL && ndoms_new == 1,
+ * and partition_sched_domains() will fallback to the single partition
+ * 'fallback_doms', it also forces the domains to be rebuilt.
  *
  * If doms_new == NULL it will be replaced with cpu_online_mask.
  * ndoms_new == 0 is a special case for destroying existing domains,
@@ -8989,8 +9067,7 @@
  *
  * Call with hotplug lock held
  */
-/* FIXME: Change to struct cpumask *doms_new[] */
-void partition_sched_domains(int ndoms_new, struct cpumask *doms_new,
+void partition_sched_domains(int ndoms_new, cpumask_var_t doms_new[],
 			     struct sched_domain_attr *dattr_new)
 {
 	int i, j, n;
@@ -9009,40 +9086,40 @@
 	/* Destroy deleted domains */
 	for (i = 0; i < ndoms_cur; i++) {
 		for (j = 0; j < n && !new_topology; j++) {
-			if (cpumask_equal(&doms_cur[i], &doms_new[j])
+			if (cpumask_equal(doms_cur[i], doms_new[j])
 			    && dattrs_equal(dattr_cur, i, dattr_new, j))
 				goto match1;
 		}
 		/* no match - a current sched domain not in new doms_new[] */
-		detach_destroy_domains(doms_cur + i);
+		detach_destroy_domains(doms_cur[i]);
 match1:
 		;
 	}
 
 	if (doms_new == NULL) {
 		ndoms_cur = 0;
-		doms_new = fallback_doms;
-		cpumask_andnot(&doms_new[0], cpu_online_mask, cpu_isolated_map);
+		doms_new = &fallback_doms;
+		cpumask_andnot(doms_new[0], cpu_online_mask, cpu_isolated_map);
 		WARN_ON_ONCE(dattr_new);
 	}
 
 	/* Build new domains */
 	for (i = 0; i < ndoms_new; i++) {
 		for (j = 0; j < ndoms_cur && !new_topology; j++) {
-			if (cpumask_equal(&doms_new[i], &doms_cur[j])
+			if (cpumask_equal(doms_new[i], doms_cur[j])
 			    && dattrs_equal(dattr_new, i, dattr_cur, j))
 				goto match2;
 		}
 		/* no match - add a new doms_new */
-		__build_sched_domains(doms_new + i,
+		__build_sched_domains(doms_new[i],
 					dattr_new ? dattr_new + i : NULL);
 match2:
 		;
 	}
 
 	/* Remember the new sched domains */
-	if (doms_cur != fallback_doms)
-		kfree(doms_cur);
+	if (doms_cur != &fallback_doms)
+		free_sched_domains(doms_cur, ndoms_cur);
 	kfree(dattr_cur);	/* kfree(NULL) is safe */
 	doms_cur = doms_new;
 	dattr_cur = dattr_new;
@@ -9364,10 +9441,6 @@
 #ifdef CONFIG_CPUMASK_OFFSTACK
 	alloc_size += num_possible_cpus() * cpumask_size();
 #endif
-	/*
-	 * As sched_init() is called before page_alloc is setup,
-	 * we use alloc_bootmem().
-	 */
 	if (alloc_size) {
 		ptr = (unsigned long)kzalloc(alloc_size, GFP_NOWAIT);
 
@@ -9522,6 +9595,8 @@
 		rq->cpu = i;
 		rq->online = 0;
 		rq->migration_thread = NULL;
+		rq->idle_stamp = 0;
+		rq->avg_idle = 2*sysctl_sched_migration_cost;
 		INIT_LIST_HEAD(&rq->migration_queue);
 		rq_attach_root(rq, &def_root_domain);
 #endif
@@ -9571,7 +9646,9 @@
 	zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
 	alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
 #endif
-	zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
+	/* May be allocated at isolcpus cmdline parse time */
+	if (cpu_isolated_map == NULL)
+		zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
 #endif /* SMP */
 
 	perf_event_init();
@@ -10901,6 +10978,7 @@
 		spin_unlock_irqrestore(&rq->lock, flags);
 	}
 	rcu_expedited_state = RCU_EXPEDITED_STATE_IDLE;
+	synchronize_sched_expedited_count++;
 	mutex_unlock(&rcu_sched_expedited_mutex);
 	put_online_cpus();
 	if (need_full_sync)
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index efb8440..6988cf0 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -285,12 +285,16 @@
 
 #ifdef CONFIG_SCHEDSTATS
 #define P(n) SEQ_printf(m, "  .%-30s: %d\n", #n, rq->n);
+#define P64(n) SEQ_printf(m, "  .%-30s: %Ld\n", #n, rq->n);
 
 	P(yld_count);
 
 	P(sched_switch);
 	P(sched_count);
 	P(sched_goidle);
+#ifdef CONFIG_SMP
+	P64(avg_idle);
+#endif
 
 	P(ttwu_count);
 	P(ttwu_local);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 37087a7..f61837a 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1345,6 +1345,37 @@
 }
 
 /*
+ * Try and locate an idle CPU in the sched_domain.
+ */
+static int
+select_idle_sibling(struct task_struct *p, struct sched_domain *sd, int target)
+{
+	int cpu = smp_processor_id();
+	int prev_cpu = task_cpu(p);
+	int i;
+
+	/*
+	 * If this domain spans both cpu and prev_cpu (see the SD_WAKE_AFFINE
+	 * test in select_task_rq_fair) and the prev_cpu is idle then that's
+	 * always a better target than the current cpu.
+	 */
+	if (target == cpu && !cpu_rq(prev_cpu)->cfs.nr_running)
+		return prev_cpu;
+
+	/*
+	 * Otherwise, iterate the domain and find an elegible idle cpu.
+	 */
+	for_each_cpu_and(i, sched_domain_span(sd), &p->cpus_allowed) {
+		if (!cpu_rq(i)->cfs.nr_running) {
+			target = i;
+			break;
+		}
+	}
+
+	return target;
+}
+
+/*
  * sched_balance_self: balance the current task (running on cpu) in domains
  * that have the 'flag' flag set. In practice, this is SD_BALANCE_FORK and
  * SD_BALANCE_EXEC.
@@ -1398,11 +1429,35 @@
 				want_sd = 0;
 		}
 
-		if (want_affine && (tmp->flags & SD_WAKE_AFFINE) &&
-		    cpumask_test_cpu(prev_cpu, sched_domain_span(tmp))) {
+		/*
+		 * While iterating the domains looking for a spanning
+		 * WAKE_AFFINE domain, adjust the affine target to any idle cpu
+		 * in cache sharing domains along the way.
+		 */
+		if (want_affine) {
+			int target = -1;
 
-			affine_sd = tmp;
-			want_affine = 0;
+			/*
+			 * If both cpu and prev_cpu are part of this domain,
+			 * cpu is a valid SD_WAKE_AFFINE target.
+			 */
+			if (cpumask_test_cpu(prev_cpu, sched_domain_span(tmp)))
+				target = cpu;
+
+			/*
+			 * If there's an idle sibling in this domain, make that
+			 * the wake_affine target instead of the current cpu.
+			 */
+			if (tmp->flags & SD_PREFER_SIBLING)
+				target = select_idle_sibling(p, tmp, target);
+
+			if (target >= 0) {
+				if (tmp->flags & SD_WAKE_AFFINE) {
+					affine_sd = tmp;
+					want_affine = 0;
+				}
+				cpu = target;
+			}
 		}
 
 		if (!want_sd && !want_affine)
@@ -1679,7 +1734,7 @@
 	struct cfs_rq *cfs_rq = &rq->cfs;
 	struct sched_entity *se;
 
-	if (unlikely(!cfs_rq->nr_running))
+	if (!cfs_rq->nr_running)
 		return NULL;
 
 	do {
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index a4d790c..5c5fef3 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1153,29 +1153,12 @@
 
 static DEFINE_PER_CPU(cpumask_var_t, local_cpu_mask);
 
-static inline int pick_optimal_cpu(int this_cpu,
-				   const struct cpumask *mask)
-{
-	int first;
-
-	/* "this_cpu" is cheaper to preempt than a remote processor */
-	if ((this_cpu != -1) && cpumask_test_cpu(this_cpu, mask))
-		return this_cpu;
-
-	first = cpumask_first(mask);
-	if (first < nr_cpu_ids)
-		return first;
-
-	return -1;
-}
-
 static int find_lowest_rq(struct task_struct *task)
 {
 	struct sched_domain *sd;
 	struct cpumask *lowest_mask = __get_cpu_var(local_cpu_mask);
 	int this_cpu = smp_processor_id();
 	int cpu      = task_cpu(task);
-	cpumask_var_t domain_mask;
 
 	if (task->rt.nr_cpus_allowed == 1)
 		return -1; /* No other targets possible */
@@ -1198,28 +1181,26 @@
 	 * Otherwise, we consult the sched_domains span maps to figure
 	 * out which cpu is logically closest to our hot cache data.
 	 */
-	if (this_cpu == cpu)
-		this_cpu = -1; /* Skip this_cpu opt if the same */
+	if (!cpumask_test_cpu(this_cpu, lowest_mask))
+		this_cpu = -1; /* Skip this_cpu opt if not among lowest */
 
-	if (alloc_cpumask_var(&domain_mask, GFP_ATOMIC)) {
-		for_each_domain(cpu, sd) {
-			if (sd->flags & SD_WAKE_AFFINE) {
-				int best_cpu;
+	for_each_domain(cpu, sd) {
+		if (sd->flags & SD_WAKE_AFFINE) {
+			int best_cpu;
 
-				cpumask_and(domain_mask,
-					    sched_domain_span(sd),
-					    lowest_mask);
+			/*
+			 * "this_cpu" is cheaper to preempt than a
+			 * remote processor.
+			 */
+			if (this_cpu != -1 &&
+			    cpumask_test_cpu(this_cpu, sched_domain_span(sd)))
+				return this_cpu;
 
-				best_cpu = pick_optimal_cpu(this_cpu,
-							    domain_mask);
-
-				if (best_cpu != -1) {
-					free_cpumask_var(domain_mask);
-					return best_cpu;
-				}
-			}
+			best_cpu = cpumask_first_and(lowest_mask,
+						     sched_domain_span(sd));
+			if (best_cpu < nr_cpu_ids)
+				return best_cpu;
 		}
-		free_cpumask_var(domain_mask);
 	}
 
 	/*
@@ -1227,7 +1208,13 @@
 	 * just give the caller *something* to work with from the compatible
 	 * locations.
 	 */
-	return pick_optimal_cpu(this_cpu, lowest_mask);
+	if (this_cpu != -1)
+		return this_cpu;
+
+	cpu = cpumask_any(lowest_mask);
+	if (cpu < nr_cpu_ids)
+		return cpu;
+	return -1;
 }
 
 /* Will lock the rq it finds */
diff --git a/kernel/signal.c b/kernel/signal.c
index 6705320..6b982f2 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -22,12 +22,14 @@
 #include <linux/ptrace.h>
 #include <linux/signal.h>
 #include <linux/signalfd.h>
+#include <linux/ratelimit.h>
 #include <linux/tracehook.h>
 #include <linux/capability.h>
 #include <linux/freezer.h>
 #include <linux/pid_namespace.h>
 #include <linux/nsproxy.h>
-#include <trace/events/sched.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/signal.h>
 
 #include <asm/param.h>
 #include <asm/uaccess.h>
@@ -41,6 +43,8 @@
 
 static struct kmem_cache *sigqueue_cachep;
 
+int print_fatal_signals __read_mostly;
+
 static void __user *sig_handler(struct task_struct *t, int sig)
 {
 	return t->sighand->action[sig - 1].sa.sa_handler;
@@ -159,7 +163,7 @@
 {
 	unsigned long i, *s, *m, x;
 	int sig = 0;
-	
+
 	s = pending->signal.sig;
 	m = mask->sig;
 	switch (_NSIG_WORDS) {
@@ -184,17 +188,31 @@
 			sig = ffz(~x) + 1;
 		break;
 	}
-	
+
 	return sig;
 }
 
+static inline void print_dropped_signal(int sig)
+{
+	static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10);
+
+	if (!print_fatal_signals)
+		return;
+
+	if (!__ratelimit(&ratelimit_state))
+		return;
+
+	printk(KERN_INFO "%s/%d: reached RLIMIT_SIGPENDING, dropped signal %d\n",
+				current->comm, current->pid, sig);
+}
+
 /*
  * allocate a new signal queue record
  * - this may be called without locks if and only if t == current, otherwise an
  *   appopriate lock must be held to stop the target task from exiting
  */
-static struct sigqueue *__sigqueue_alloc(struct task_struct *t, gfp_t flags,
-					 int override_rlimit)
+static struct sigqueue *
+__sigqueue_alloc(int sig, struct task_struct *t, gfp_t flags, int override_rlimit)
 {
 	struct sigqueue *q = NULL;
 	struct user_struct *user;
@@ -207,10 +225,15 @@
 	 */
 	user = get_uid(__task_cred(t)->user);
 	atomic_inc(&user->sigpending);
+
 	if (override_rlimit ||
 	    atomic_read(&user->sigpending) <=
-			t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur)
+			t->signal->rlim[RLIMIT_SIGPENDING].rlim_cur) {
 		q = kmem_cache_alloc(sigqueue_cachep, flags);
+	} else {
+		print_dropped_signal(sig);
+	}
+
 	if (unlikely(q == NULL)) {
 		atomic_dec(&user->sigpending);
 		free_uid(user);
@@ -834,7 +857,7 @@
 	struct sigqueue *q;
 	int override_rlimit;
 
-	trace_sched_signal_send(sig, t);
+	trace_signal_generate(sig, info, t);
 
 	assert_spin_locked(&t->sighand->siglock);
 
@@ -869,7 +892,7 @@
 	else
 		override_rlimit = 0;
 
-	q = __sigqueue_alloc(t, GFP_ATOMIC | __GFP_NOTRACK_FALSE_POSITIVE,
+	q = __sigqueue_alloc(sig, t, GFP_ATOMIC | __GFP_NOTRACK_FALSE_POSITIVE,
 		override_rlimit);
 	if (q) {
 		list_add_tail(&q->list, &pending->list);
@@ -896,12 +919,21 @@
 			break;
 		}
 	} else if (!is_si_special(info)) {
-		if (sig >= SIGRTMIN && info->si_code != SI_USER)
-		/*
-		 * Queue overflow, abort.  We may abort if the signal was rt
-		 * and sent by user using something other than kill().
-		 */
+		if (sig >= SIGRTMIN && info->si_code != SI_USER) {
+			/*
+			 * Queue overflow, abort.  We may abort if the
+			 * signal was rt and sent by user using something
+			 * other than kill().
+			 */
+			trace_signal_overflow_fail(sig, group, info);
 			return -EAGAIN;
+		} else {
+			/*
+			 * This is a silent loss of information.  We still
+			 * send the signal, but the *info bits are lost.
+			 */
+			trace_signal_lose_info(sig, group, info);
+		}
 	}
 
 out_set:
@@ -925,8 +957,6 @@
 	return __send_signal(sig, info, t, group, from_ancestor_ns);
 }
 
-int print_fatal_signals;
-
 static void print_fatal_signal(struct pt_regs *regs, int signr)
 {
 	printk("%s/%d: potentially unexpected fatal signal %d.\n",
@@ -1293,19 +1323,19 @@
  * These functions support sending signals using preallocated sigqueue
  * structures.  This is needed "because realtime applications cannot
  * afford to lose notifications of asynchronous events, like timer
- * expirations or I/O completions".  In the case of Posix Timers 
+ * expirations or I/O completions".  In the case of Posix Timers
  * we allocate the sigqueue structure from the timer_create.  If this
  * allocation fails we are able to report the failure to the application
  * with an EAGAIN error.
  */
- 
 struct sigqueue *sigqueue_alloc(void)
 {
-	struct sigqueue *q;
+	struct sigqueue *q = __sigqueue_alloc(-1, current, GFP_KERNEL, 0);
 
-	if ((q = __sigqueue_alloc(current, GFP_KERNEL, 0)))
+	if (q)
 		q->flags |= SIGQUEUE_PREALLOC;
-	return(q);
+
+	return q;
 }
 
 void sigqueue_free(struct sigqueue *q)
@@ -1839,6 +1869,9 @@
 			ka = &sighand->action[signr-1];
 		}
 
+		/* Trace actually delivered signals. */
+		trace_signal_deliver(signr, info, ka);
+
 		if (ka->sa.sa_handler == SIG_IGN) /* Do nothing.  */
 			continue;
 		if (ka->sa.sa_handler != SIG_DFL) {
diff --git a/kernel/slow-work-debugfs.c b/kernel/slow-work-debugfs.c
new file mode 100644
index 0000000..e45c436
--- /dev/null
+++ b/kernel/slow-work-debugfs.c
@@ -0,0 +1,227 @@
+/* Slow work debugging
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/slow-work.h>
+#include <linux/fs.h>
+#include <linux/time.h>
+#include <linux/seq_file.h>
+#include "slow-work.h"
+
+#define ITERATOR_SHIFT		(BITS_PER_LONG - 4)
+#define ITERATOR_SELECTOR	(0xfUL << ITERATOR_SHIFT)
+#define ITERATOR_COUNTER	(~ITERATOR_SELECTOR)
+
+void slow_work_new_thread_desc(struct slow_work *work, struct seq_file *m)
+{
+	seq_puts(m, "Slow-work: New thread");
+}
+
+/*
+ * Render the time mark field on a work item into a 5-char time with units plus
+ * a space
+ */
+static void slow_work_print_mark(struct seq_file *m, struct slow_work *work)
+{
+	struct timespec now, diff;
+
+	now = CURRENT_TIME;
+	diff = timespec_sub(now, work->mark);
+
+	if (diff.tv_sec < 0)
+		seq_puts(m, "  -ve ");
+	else if (diff.tv_sec == 0 && diff.tv_nsec < 1000)
+		seq_printf(m, "%3luns ", diff.tv_nsec);
+	else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000)
+		seq_printf(m, "%3luus ", diff.tv_nsec / 1000);
+	else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000000)
+		seq_printf(m, "%3lums ", diff.tv_nsec / 1000000);
+	else if (diff.tv_sec <= 1)
+		seq_puts(m, "   1s ");
+	else if (diff.tv_sec < 60)
+		seq_printf(m, "%4lus ", diff.tv_sec);
+	else if (diff.tv_sec < 60 * 60)
+		seq_printf(m, "%4lum ", diff.tv_sec / 60);
+	else if (diff.tv_sec < 60 * 60 * 24)
+		seq_printf(m, "%4luh ", diff.tv_sec / 3600);
+	else
+		seq_puts(m, "exces ");
+}
+
+/*
+ * Describe a slow work item for debugfs
+ */
+static int slow_work_runqueue_show(struct seq_file *m, void *v)
+{
+	struct slow_work *work;
+	struct list_head *p = v;
+	unsigned long id;
+
+	switch ((unsigned long) v) {
+	case 1:
+		seq_puts(m, "THR PID   ITEM ADDR        FL MARK  DESC\n");
+		return 0;
+	case 2:
+		seq_puts(m, "=== ===== ================ == ===== ==========\n");
+		return 0;
+
+	case 3 ... 3 + SLOW_WORK_THREAD_LIMIT - 1:
+		id = (unsigned long) v - 3;
+
+		read_lock(&slow_work_execs_lock);
+		work = slow_work_execs[id];
+		if (work) {
+			smp_read_barrier_depends();
+
+			seq_printf(m, "%3lu %5d %16p %2lx ",
+				   id, slow_work_pids[id], work, work->flags);
+			slow_work_print_mark(m, work);
+
+			if (work->ops->desc)
+				work->ops->desc(work, m);
+			seq_putc(m, '\n');
+		}
+		read_unlock(&slow_work_execs_lock);
+		return 0;
+
+	default:
+		work = list_entry(p, struct slow_work, link);
+		seq_printf(m, "%3s     - %16p %2lx ",
+			   work->flags & SLOW_WORK_VERY_SLOW ? "vsq" : "sq",
+			   work, work->flags);
+		slow_work_print_mark(m, work);
+
+		if (work->ops->desc)
+			work->ops->desc(work, m);
+		seq_putc(m, '\n');
+		return 0;
+	}
+}
+
+/*
+ * map the iterator to a work item
+ */
+static void *slow_work_runqueue_index(struct seq_file *m, loff_t *_pos)
+{
+	struct list_head *p;
+	unsigned long count, id;
+
+	switch (*_pos >> ITERATOR_SHIFT) {
+	case 0x0:
+		if (*_pos == 0)
+			*_pos = 1;
+		if (*_pos < 3)
+			return (void *)(unsigned long) *_pos;
+		if (*_pos < 3 + SLOW_WORK_THREAD_LIMIT)
+			for (id = *_pos - 3;
+			     id < SLOW_WORK_THREAD_LIMIT;
+			     id++, (*_pos)++)
+				if (slow_work_execs[id])
+					return (void *)(unsigned long) *_pos;
+		*_pos = 0x1UL << ITERATOR_SHIFT;
+
+	case 0x1:
+		count = *_pos & ITERATOR_COUNTER;
+		list_for_each(p, &slow_work_queue) {
+			if (count == 0)
+				return p;
+			count--;
+		}
+		*_pos = 0x2UL << ITERATOR_SHIFT;
+
+	case 0x2:
+		count = *_pos & ITERATOR_COUNTER;
+		list_for_each(p, &vslow_work_queue) {
+			if (count == 0)
+				return p;
+			count--;
+		}
+		*_pos = 0x3UL << ITERATOR_SHIFT;
+
+	default:
+		return NULL;
+	}
+}
+
+/*
+ * set up the iterator to start reading from the first line
+ */
+static void *slow_work_runqueue_start(struct seq_file *m, loff_t *_pos)
+{
+	spin_lock_irq(&slow_work_queue_lock);
+	return slow_work_runqueue_index(m, _pos);
+}
+
+/*
+ * move to the next line
+ */
+static void *slow_work_runqueue_next(struct seq_file *m, void *v, loff_t *_pos)
+{
+	struct list_head *p = v;
+	unsigned long selector = *_pos >> ITERATOR_SHIFT;
+
+	(*_pos)++;
+	switch (selector) {
+	case 0x0:
+		return slow_work_runqueue_index(m, _pos);
+
+	case 0x1:
+		if (*_pos >> ITERATOR_SHIFT == 0x1) {
+			p = p->next;
+			if (p != &slow_work_queue)
+				return p;
+		}
+		*_pos = 0x2UL << ITERATOR_SHIFT;
+		p = &vslow_work_queue;
+
+	case 0x2:
+		if (*_pos >> ITERATOR_SHIFT == 0x2) {
+			p = p->next;
+			if (p != &vslow_work_queue)
+				return p;
+		}
+		*_pos = 0x3UL << ITERATOR_SHIFT;
+
+	default:
+		return NULL;
+	}
+}
+
+/*
+ * clean up after reading
+ */
+static void slow_work_runqueue_stop(struct seq_file *m, void *v)
+{
+	spin_unlock_irq(&slow_work_queue_lock);
+}
+
+static const struct seq_operations slow_work_runqueue_ops = {
+	.start		= slow_work_runqueue_start,
+	.stop		= slow_work_runqueue_stop,
+	.next		= slow_work_runqueue_next,
+	.show		= slow_work_runqueue_show,
+};
+
+/*
+ * open "/sys/kernel/debug/slow_work/runqueue" to list queue contents
+ */
+static int slow_work_runqueue_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &slow_work_runqueue_ops);
+}
+
+const struct file_operations slow_work_runqueue_fops = {
+	.owner		= THIS_MODULE,
+	.open		= slow_work_runqueue_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
diff --git a/kernel/slow-work.c b/kernel/slow-work.c
index 0d31135..7494bbf 100644
--- a/kernel/slow-work.c
+++ b/kernel/slow-work.c
@@ -16,11 +16,8 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/wait.h>
-
-#define SLOW_WORK_CULL_TIMEOUT (5 * HZ)	/* cull threads 5s after running out of
-					 * things to do */
-#define SLOW_WORK_OOM_TIMEOUT (5 * HZ)	/* can't start new threads for 5s after
-					 * OOM */
+#include <linux/debugfs.h>
+#include "slow-work.h"
 
 static void slow_work_cull_timeout(unsigned long);
 static void slow_work_oom_timeout(unsigned long);
@@ -46,13 +43,12 @@
 
 #ifdef CONFIG_SYSCTL
 static const int slow_work_min_min_threads = 2;
-static int slow_work_max_max_threads = 255;
+static int slow_work_max_max_threads = SLOW_WORK_THREAD_LIMIT;
 static const int slow_work_min_vslow = 1;
 static const int slow_work_max_vslow = 99;
 
 ctl_table slow_work_sysctls[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "min-threads",
 		.data		= &slow_work_min_threads,
 		.maxlen		= sizeof(unsigned),
@@ -62,7 +58,6 @@
 		.extra2		= &slow_work_max_threads,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "max-threads",
 		.data		= &slow_work_max_threads,
 		.maxlen		= sizeof(unsigned),
@@ -72,16 +67,15 @@
 		.extra2		= (void *) &slow_work_max_max_threads,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "vslow-percentage",
 		.data		= &vslow_work_proportion,
 		.maxlen		= sizeof(unsigned),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= (void *) &slow_work_min_vslow,
 		.extra2		= (void *) &slow_work_max_vslow,
 	},
-	{ .ctl_name = 0 }
+	{}
 };
 #endif
 
@@ -98,6 +92,56 @@
 static struct slow_work slow_work_new_thread; /* new thread starter */
 
 /*
+ * slow work ID allocation (use slow_work_queue_lock)
+ */
+static DECLARE_BITMAP(slow_work_ids, SLOW_WORK_THREAD_LIMIT);
+
+/*
+ * Unregistration tracking to prevent put_ref() from disappearing during module
+ * unload
+ */
+#ifdef CONFIG_MODULES
+static struct module *slow_work_thread_processing[SLOW_WORK_THREAD_LIMIT];
+static struct module *slow_work_unreg_module;
+static struct slow_work *slow_work_unreg_work_item;
+static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq);
+static DEFINE_MUTEX(slow_work_unreg_sync_lock);
+
+static void slow_work_set_thread_processing(int id, struct slow_work *work)
+{
+	if (work)
+		slow_work_thread_processing[id] = work->owner;
+}
+static void slow_work_done_thread_processing(int id, struct slow_work *work)
+{
+	struct module *module = slow_work_thread_processing[id];
+
+	slow_work_thread_processing[id] = NULL;
+	smp_mb();
+	if (slow_work_unreg_work_item == work ||
+	    slow_work_unreg_module == module)
+		wake_up_all(&slow_work_unreg_wq);
+}
+static void slow_work_clear_thread_processing(int id)
+{
+	slow_work_thread_processing[id] = NULL;
+}
+#else
+static void slow_work_set_thread_processing(int id, struct slow_work *work) {}
+static void slow_work_done_thread_processing(int id, struct slow_work *work) {}
+static void slow_work_clear_thread_processing(int id) {}
+#endif
+
+/*
+ * Data for tracking currently executing items for indication through /proc
+ */
+#ifdef CONFIG_SLOW_WORK_DEBUG
+struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT];
+pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT];
+DEFINE_RWLOCK(slow_work_execs_lock);
+#endif
+
+/*
  * The queues of work items and the lock governing access to them.  These are
  * shared between all the CPUs.  It doesn't make sense to have per-CPU queues
  * as the number of threads bears no relation to the number of CPUs.
@@ -105,9 +149,18 @@
  * There are two queues of work items: one for slow work items, and one for
  * very slow work items.
  */
-static LIST_HEAD(slow_work_queue);
-static LIST_HEAD(vslow_work_queue);
-static DEFINE_SPINLOCK(slow_work_queue_lock);
+LIST_HEAD(slow_work_queue);
+LIST_HEAD(vslow_work_queue);
+DEFINE_SPINLOCK(slow_work_queue_lock);
+
+/*
+ * The following are two wait queues that get pinged when a work item is placed
+ * on an empty queue.  These allow work items that are hogging a thread by
+ * sleeping in a way that could be deferred to yield their thread and enqueue
+ * themselves.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(slow_work_queue_waits_for_occupation);
+static DECLARE_WAIT_QUEUE_HEAD(vslow_work_queue_waits_for_occupation);
 
 /*
  * The thread controls.  A variable used to signal to the threads that they
@@ -126,6 +179,20 @@
 static int slow_work_user_count;
 static DEFINE_MUTEX(slow_work_user_lock);
 
+static inline int slow_work_get_ref(struct slow_work *work)
+{
+	if (work->ops->get_ref)
+		return work->ops->get_ref(work);
+
+	return 0;
+}
+
+static inline void slow_work_put_ref(struct slow_work *work)
+{
+	if (work->ops->put_ref)
+		work->ops->put_ref(work);
+}
+
 /*
  * Calculate the maximum number of active threads in the pool that are
  * permitted to process very slow work items.
@@ -149,7 +216,7 @@
  * Attempt to execute stuff queued on a slow thread.  Return true if we managed
  * it, false if there was nothing to do.
  */
-static bool slow_work_execute(void)
+static noinline bool slow_work_execute(int id)
 {
 	struct slow_work *work = NULL;
 	unsigned vsmax;
@@ -186,6 +253,13 @@
 	} else {
 		very_slow = false; /* avoid the compiler warning */
 	}
+
+	slow_work_set_thread_processing(id, work);
+	if (work) {
+		slow_work_mark_time(work);
+		slow_work_begin_exec(id, work);
+	}
+
 	spin_unlock_irq(&slow_work_queue_lock);
 
 	if (!work)
@@ -194,12 +268,19 @@
 	if (!test_and_clear_bit(SLOW_WORK_PENDING, &work->flags))
 		BUG();
 
-	work->ops->execute(work);
+	/* don't execute if the work is in the process of being cancelled */
+	if (!test_bit(SLOW_WORK_CANCELLING, &work->flags))
+		work->ops->execute(work);
 
 	if (very_slow)
 		atomic_dec(&vslow_work_executing_count);
 	clear_bit_unlock(SLOW_WORK_EXECUTING, &work->flags);
 
+	/* wake up anyone waiting for this work to be complete */
+	wake_up_bit(&work->flags, SLOW_WORK_EXECUTING);
+
+	slow_work_end_exec(id, work);
+
 	/* if someone tried to enqueue the item whilst we were executing it,
 	 * then it'll be left unenqueued to avoid multiple threads trying to
 	 * execute it simultaneously
@@ -219,7 +300,10 @@
 		spin_unlock_irq(&slow_work_queue_lock);
 	}
 
-	work->ops->put_ref(work);
+	/* sort out the race between module unloading and put_ref() */
+	slow_work_put_ref(work);
+	slow_work_done_thread_processing(id, work);
+
 	return true;
 
 auto_requeue:
@@ -227,15 +311,61 @@
 	 * - we transfer our ref on the item back to the appropriate queue
 	 * - don't wake another thread up as we're awake already
 	 */
+	slow_work_mark_time(work);
 	if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags))
 		list_add_tail(&work->link, &vslow_work_queue);
 	else
 		list_add_tail(&work->link, &slow_work_queue);
 	spin_unlock_irq(&slow_work_queue_lock);
+	slow_work_clear_thread_processing(id);
 	return true;
 }
 
 /**
+ * slow_work_sleep_till_thread_needed - Sleep till thread needed by other work
+ * work: The work item under execution that wants to sleep
+ * _timeout: Scheduler sleep timeout
+ *
+ * Allow a requeueable work item to sleep on a slow-work processor thread until
+ * that thread is needed to do some other work or the sleep is interrupted by
+ * some other event.
+ *
+ * The caller must set up a wake up event before calling this and must have set
+ * the appropriate sleep mode (such as TASK_UNINTERRUPTIBLE) and tested its own
+ * condition before calling this function as no test is made here.
+ *
+ * False is returned if there is nothing on the queue; true is returned if the
+ * work item should be requeued
+ */
+bool slow_work_sleep_till_thread_needed(struct slow_work *work,
+					signed long *_timeout)
+{
+	wait_queue_head_t *wfo_wq;
+	struct list_head *queue;
+
+	DEFINE_WAIT(wait);
+
+	if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) {
+		wfo_wq = &vslow_work_queue_waits_for_occupation;
+		queue = &vslow_work_queue;
+	} else {
+		wfo_wq = &slow_work_queue_waits_for_occupation;
+		queue = &slow_work_queue;
+	}
+
+	if (!list_empty(queue))
+		return true;
+
+	add_wait_queue_exclusive(wfo_wq, &wait);
+	if (list_empty(queue))
+		*_timeout = schedule_timeout(*_timeout);
+	finish_wait(wfo_wq, &wait);
+
+	return !list_empty(queue);
+}
+EXPORT_SYMBOL(slow_work_sleep_till_thread_needed);
+
+/**
  * slow_work_enqueue - Schedule a slow work item for processing
  * @work: The work item to queue
  *
@@ -260,16 +390,22 @@
  * allowed to pick items to execute.  This ensures that very slow items won't
  * overly block ones that are just ordinarily slow.
  *
- * Returns 0 if successful, -EAGAIN if not.
+ * Returns 0 if successful, -EAGAIN if not (or -ECANCELED if cancelled work is
+ * attempted queued)
  */
 int slow_work_enqueue(struct slow_work *work)
 {
+	wait_queue_head_t *wfo_wq;
+	struct list_head *queue;
 	unsigned long flags;
+	int ret;
+
+	if (test_bit(SLOW_WORK_CANCELLING, &work->flags))
+		return -ECANCELED;
 
 	BUG_ON(slow_work_user_count <= 0);
 	BUG_ON(!work);
 	BUG_ON(!work->ops);
-	BUG_ON(!work->ops->get_ref);
 
 	/* when honouring an enqueue request, we only promise that we will run
 	 * the work function in the future; we do not promise to run it once
@@ -280,8 +416,19 @@
 	 * maintaining our promise
 	 */
 	if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) {
+		if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) {
+			wfo_wq = &vslow_work_queue_waits_for_occupation;
+			queue = &vslow_work_queue;
+		} else {
+			wfo_wq = &slow_work_queue_waits_for_occupation;
+			queue = &slow_work_queue;
+		}
+
 		spin_lock_irqsave(&slow_work_queue_lock, flags);
 
+		if (unlikely(test_bit(SLOW_WORK_CANCELLING, &work->flags)))
+			goto cancelled;
+
 		/* we promise that we will not attempt to execute the work
 		 * function in more than one thread simultaneously
 		 *
@@ -299,25 +446,221 @@
 		if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) {
 			set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags);
 		} else {
-			if (work->ops->get_ref(work) < 0)
-				goto cant_get_ref;
-			if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags))
-				list_add_tail(&work->link, &vslow_work_queue);
-			else
-				list_add_tail(&work->link, &slow_work_queue);
+			ret = slow_work_get_ref(work);
+			if (ret < 0)
+				goto failed;
+			slow_work_mark_time(work);
+			list_add_tail(&work->link, queue);
 			wake_up(&slow_work_thread_wq);
+
+			/* if someone who could be requeued is sleeping on a
+			 * thread, then ask them to yield their thread */
+			if (work->link.prev == queue)
+				wake_up(wfo_wq);
 		}
 
 		spin_unlock_irqrestore(&slow_work_queue_lock, flags);
 	}
 	return 0;
 
-cant_get_ref:
+cancelled:
+	ret = -ECANCELED;
+failed:
 	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
-	return -EAGAIN;
+	return ret;
 }
 EXPORT_SYMBOL(slow_work_enqueue);
 
+static int slow_work_wait(void *word)
+{
+	schedule();
+	return 0;
+}
+
+/**
+ * slow_work_cancel - Cancel a slow work item
+ * @work: The work item to cancel
+ *
+ * This function will cancel a previously enqueued work item. If we cannot
+ * cancel the work item, it is guarenteed to have run when this function
+ * returns.
+ */
+void slow_work_cancel(struct slow_work *work)
+{
+	bool wait = true, put = false;
+
+	set_bit(SLOW_WORK_CANCELLING, &work->flags);
+	smp_mb();
+
+	/* if the work item is a delayed work item with an active timer, we
+	 * need to wait for the timer to finish _before_ getting the spinlock,
+	 * lest we deadlock against the timer routine
+	 *
+	 * the timer routine will leave DELAYED set if it notices the
+	 * CANCELLING flag in time
+	 */
+	if (test_bit(SLOW_WORK_DELAYED, &work->flags)) {
+		struct delayed_slow_work *dwork =
+			container_of(work, struct delayed_slow_work, work);
+		del_timer_sync(&dwork->timer);
+	}
+
+	spin_lock_irq(&slow_work_queue_lock);
+
+	if (test_bit(SLOW_WORK_DELAYED, &work->flags)) {
+		/* the timer routine aborted or never happened, so we are left
+		 * holding the timer's reference on the item and should just
+		 * drop the pending flag and wait for any ongoing execution to
+		 * finish */
+		struct delayed_slow_work *dwork =
+			container_of(work, struct delayed_slow_work, work);
+
+		BUG_ON(timer_pending(&dwork->timer));
+		BUG_ON(!list_empty(&work->link));
+
+		clear_bit(SLOW_WORK_DELAYED, &work->flags);
+		put = true;
+		clear_bit(SLOW_WORK_PENDING, &work->flags);
+
+	} else if (test_bit(SLOW_WORK_PENDING, &work->flags) &&
+		   !list_empty(&work->link)) {
+		/* the link in the pending queue holds a reference on the item
+		 * that we will need to release */
+		list_del_init(&work->link);
+		wait = false;
+		put = true;
+		clear_bit(SLOW_WORK_PENDING, &work->flags);
+
+	} else if (test_and_clear_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags)) {
+		/* the executor is holding our only reference on the item, so
+		 * we merely need to wait for it to finish executing */
+		clear_bit(SLOW_WORK_PENDING, &work->flags);
+	}
+
+	spin_unlock_irq(&slow_work_queue_lock);
+
+	/* the EXECUTING flag is set by the executor whilst the spinlock is set
+	 * and before the item is dequeued - so assuming the above doesn't
+	 * actually dequeue it, simply waiting for the EXECUTING flag to be
+	 * released here should be sufficient */
+	if (wait)
+		wait_on_bit(&work->flags, SLOW_WORK_EXECUTING, slow_work_wait,
+			    TASK_UNINTERRUPTIBLE);
+
+	clear_bit(SLOW_WORK_CANCELLING, &work->flags);
+	if (put)
+		slow_work_put_ref(work);
+}
+EXPORT_SYMBOL(slow_work_cancel);
+
+/*
+ * Handle expiry of the delay timer, indicating that a delayed slow work item
+ * should now be queued if not cancelled
+ */
+static void delayed_slow_work_timer(unsigned long data)
+{
+	wait_queue_head_t *wfo_wq;
+	struct list_head *queue;
+	struct slow_work *work = (struct slow_work *) data;
+	unsigned long flags;
+	bool queued = false, put = false, first = false;
+
+	if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) {
+		wfo_wq = &vslow_work_queue_waits_for_occupation;
+		queue = &vslow_work_queue;
+	} else {
+		wfo_wq = &slow_work_queue_waits_for_occupation;
+		queue = &slow_work_queue;
+	}
+
+	spin_lock_irqsave(&slow_work_queue_lock, flags);
+	if (likely(!test_bit(SLOW_WORK_CANCELLING, &work->flags))) {
+		clear_bit(SLOW_WORK_DELAYED, &work->flags);
+
+		if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) {
+			/* we discard the reference the timer was holding in
+			 * favour of the one the executor holds */
+			set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags);
+			put = true;
+		} else {
+			slow_work_mark_time(work);
+			list_add_tail(&work->link, queue);
+			queued = true;
+			if (work->link.prev == queue)
+				first = true;
+		}
+	}
+
+	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
+	if (put)
+		slow_work_put_ref(work);
+	if (first)
+		wake_up(wfo_wq);
+	if (queued)
+		wake_up(&slow_work_thread_wq);
+}
+
+/**
+ * delayed_slow_work_enqueue - Schedule a delayed slow work item for processing
+ * @dwork: The delayed work item to queue
+ * @delay: When to start executing the work, in jiffies from now
+ *
+ * This is similar to slow_work_enqueue(), but it adds a delay before the work
+ * is actually queued for processing.
+ *
+ * The item can have delayed processing requested on it whilst it is being
+ * executed.  The delay will begin immediately, and if it expires before the
+ * item finishes executing, the item will be placed back on the queue when it
+ * has done executing.
+ */
+int delayed_slow_work_enqueue(struct delayed_slow_work *dwork,
+			      unsigned long delay)
+{
+	struct slow_work *work = &dwork->work;
+	unsigned long flags;
+	int ret;
+
+	if (delay == 0)
+		return slow_work_enqueue(&dwork->work);
+
+	BUG_ON(slow_work_user_count <= 0);
+	BUG_ON(!work);
+	BUG_ON(!work->ops);
+
+	if (test_bit(SLOW_WORK_CANCELLING, &work->flags))
+		return -ECANCELED;
+
+	if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) {
+		spin_lock_irqsave(&slow_work_queue_lock, flags);
+
+		if (test_bit(SLOW_WORK_CANCELLING, &work->flags))
+			goto cancelled;
+
+		/* the timer holds a reference whilst it is pending */
+		ret = work->ops->get_ref(work);
+		if (ret < 0)
+			goto cant_get_ref;
+
+		if (test_and_set_bit(SLOW_WORK_DELAYED, &work->flags))
+			BUG();
+		dwork->timer.expires = jiffies + delay;
+		dwork->timer.data = (unsigned long) work;
+		dwork->timer.function = delayed_slow_work_timer;
+		add_timer(&dwork->timer);
+
+		spin_unlock_irqrestore(&slow_work_queue_lock, flags);
+	}
+
+	return 0;
+
+cancelled:
+	ret = -ECANCELED;
+cant_get_ref:
+	spin_unlock_irqrestore(&slow_work_queue_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(delayed_slow_work_enqueue);
+
 /*
  * Schedule a cull of the thread pool at some time in the near future
  */
@@ -368,13 +711,23 @@
  */
 static int slow_work_thread(void *_data)
 {
-	int vsmax;
+	int vsmax, id;
 
 	DEFINE_WAIT(wait);
 
 	set_freezable();
 	set_user_nice(current, -5);
 
+	/* allocate ourselves an ID */
+	spin_lock_irq(&slow_work_queue_lock);
+	id = find_first_zero_bit(slow_work_ids, SLOW_WORK_THREAD_LIMIT);
+	BUG_ON(id < 0 || id >= SLOW_WORK_THREAD_LIMIT);
+	__set_bit(id, slow_work_ids);
+	slow_work_set_thread_pid(id, current->pid);
+	spin_unlock_irq(&slow_work_queue_lock);
+
+	sprintf(current->comm, "kslowd%03u", id);
+
 	for (;;) {
 		vsmax = vslow_work_proportion;
 		vsmax *= atomic_read(&slow_work_thread_count);
@@ -395,7 +748,7 @@
 		vsmax *= atomic_read(&slow_work_thread_count);
 		vsmax /= 100;
 
-		if (slow_work_available(vsmax) && slow_work_execute()) {
+		if (slow_work_available(vsmax) && slow_work_execute(id)) {
 			cond_resched();
 			if (list_empty(&slow_work_queue) &&
 			    list_empty(&vslow_work_queue) &&
@@ -412,6 +765,11 @@
 			break;
 	}
 
+	spin_lock_irq(&slow_work_queue_lock);
+	slow_work_set_thread_pid(id, 0);
+	__clear_bit(id, slow_work_ids);
+	spin_unlock_irq(&slow_work_queue_lock);
+
 	if (atomic_dec_and_test(&slow_work_thread_count))
 		complete_and_exit(&slow_work_last_thread_exited, 0);
 	return 0;
@@ -427,21 +785,6 @@
 }
 
 /*
- * Get a reference on slow work thread starter
- */
-static int slow_work_new_thread_get_ref(struct slow_work *work)
-{
-	return 0;
-}
-
-/*
- * Drop a reference on slow work thread starter
- */
-static void slow_work_new_thread_put_ref(struct slow_work *work)
-{
-}
-
-/*
  * Start a new slow work thread
  */
 static void slow_work_new_thread_execute(struct slow_work *work)
@@ -475,9 +818,11 @@
 }
 
 static const struct slow_work_ops slow_work_new_thread_ops = {
-	.get_ref	= slow_work_new_thread_get_ref,
-	.put_ref	= slow_work_new_thread_put_ref,
+	.owner		= THIS_MODULE,
 	.execute	= slow_work_new_thread_execute,
+#ifdef CONFIG_SLOW_WORK_DEBUG
+	.desc		= slow_work_new_thread_desc,
+#endif
 };
 
 /*
@@ -546,12 +891,13 @@
 
 /**
  * slow_work_register_user - Register a user of the facility
+ * @module: The module about to make use of the facility
  *
  * Register a user of the facility, starting up the initial threads if there
  * aren't any other users at this point.  This will return 0 if successful, or
  * an error if not.
  */
-int slow_work_register_user(void)
+int slow_work_register_user(struct module *module)
 {
 	struct task_struct *p;
 	int loop;
@@ -598,14 +944,81 @@
 }
 EXPORT_SYMBOL(slow_work_register_user);
 
+/*
+ * wait for all outstanding items from the calling module to complete
+ * - note that more items may be queued whilst we're waiting
+ */
+static void slow_work_wait_for_items(struct module *module)
+{
+#ifdef CONFIG_MODULES
+	DECLARE_WAITQUEUE(myself, current);
+	struct slow_work *work;
+	int loop;
+
+	mutex_lock(&slow_work_unreg_sync_lock);
+	add_wait_queue(&slow_work_unreg_wq, &myself);
+
+	for (;;) {
+		spin_lock_irq(&slow_work_queue_lock);
+
+		/* first of all, we wait for the last queued item in each list
+		 * to be processed */
+		list_for_each_entry_reverse(work, &vslow_work_queue, link) {
+			if (work->owner == module) {
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				slow_work_unreg_work_item = work;
+				goto do_wait;
+			}
+		}
+		list_for_each_entry_reverse(work, &slow_work_queue, link) {
+			if (work->owner == module) {
+				set_current_state(TASK_UNINTERRUPTIBLE);
+				slow_work_unreg_work_item = work;
+				goto do_wait;
+			}
+		}
+
+		/* then we wait for the items being processed to finish */
+		slow_work_unreg_module = module;
+		smp_mb();
+		for (loop = 0; loop < SLOW_WORK_THREAD_LIMIT; loop++) {
+			if (slow_work_thread_processing[loop] == module)
+				goto do_wait;
+		}
+		spin_unlock_irq(&slow_work_queue_lock);
+		break; /* okay, we're done */
+
+	do_wait:
+		spin_unlock_irq(&slow_work_queue_lock);
+		schedule();
+		slow_work_unreg_work_item = NULL;
+		slow_work_unreg_module = NULL;
+	}
+
+	remove_wait_queue(&slow_work_unreg_wq, &myself);
+	mutex_unlock(&slow_work_unreg_sync_lock);
+#endif /* CONFIG_MODULES */
+}
+
 /**
  * slow_work_unregister_user - Unregister a user of the facility
+ * @module: The module whose items should be cleared
  *
  * Unregister a user of the facility, killing all the threads if this was the
  * last one.
+ *
+ * This waits for all the work items belonging to the nominated module to go
+ * away before proceeding.
  */
-void slow_work_unregister_user(void)
+void slow_work_unregister_user(struct module *module)
 {
+	/* first of all, wait for all outstanding items from the calling module
+	 * to complete */
+	if (module)
+		slow_work_wait_for_items(module);
+
+	/* then we can actually go about shutting down the facility if need
+	 * be */
 	mutex_lock(&slow_work_user_lock);
 
 	BUG_ON(slow_work_user_count <= 0);
@@ -639,6 +1052,16 @@
 	if (slow_work_max_max_threads < nr_cpus * 2)
 		slow_work_max_max_threads = nr_cpus * 2;
 #endif
+#ifdef CONFIG_SLOW_WORK_DEBUG
+	{
+		struct dentry *dbdir;
+
+		dbdir = debugfs_create_dir("slow_work", NULL);
+		if (dbdir && !IS_ERR(dbdir))
+			debugfs_create_file("runqueue", S_IFREG | 0400, dbdir,
+					    NULL, &slow_work_runqueue_fops);
+	}
+#endif
 	return 0;
 }
 
diff --git a/kernel/slow-work.h b/kernel/slow-work.h
new file mode 100644
index 0000000..321f3c5
--- /dev/null
+++ b/kernel/slow-work.h
@@ -0,0 +1,72 @@
+/* Slow work private definitions
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#define SLOW_WORK_CULL_TIMEOUT (5 * HZ)	/* cull threads 5s after running out of
+					 * things to do */
+#define SLOW_WORK_OOM_TIMEOUT (5 * HZ)	/* can't start new threads for 5s after
+					 * OOM */
+
+#define SLOW_WORK_THREAD_LIMIT	255	/* abs maximum number of slow-work threads */
+
+/*
+ * slow-work.c
+ */
+#ifdef CONFIG_SLOW_WORK_DEBUG
+extern struct slow_work *slow_work_execs[];
+extern pid_t slow_work_pids[];
+extern rwlock_t slow_work_execs_lock;
+#endif
+
+extern struct list_head slow_work_queue;
+extern struct list_head vslow_work_queue;
+extern spinlock_t slow_work_queue_lock;
+
+/*
+ * slow-work-debugfs.c
+ */
+#ifdef CONFIG_SLOW_WORK_DEBUG
+extern const struct file_operations slow_work_runqueue_fops;
+
+extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *);
+#endif
+
+/*
+ * Helper functions
+ */
+static inline void slow_work_set_thread_pid(int id, pid_t pid)
+{
+#ifdef CONFIG_SLOW_WORK_PROC
+	slow_work_pids[id] = pid;
+#endif
+}
+
+static inline void slow_work_mark_time(struct slow_work *work)
+{
+#ifdef CONFIG_SLOW_WORK_PROC
+	work->mark = CURRENT_TIME;
+#endif
+}
+
+static inline void slow_work_begin_exec(int id, struct slow_work *work)
+{
+#ifdef CONFIG_SLOW_WORK_PROC
+	slow_work_execs[id] = work;
+#endif
+}
+
+static inline void slow_work_end_exec(int id, struct slow_work *work)
+{
+#ifdef CONFIG_SLOW_WORK_PROC
+	write_lock(&slow_work_execs_lock);
+	slow_work_execs[id] = NULL;
+	write_unlock(&slow_work_execs_lock);
+#endif
+}
diff --git a/kernel/smp.c b/kernel/smp.c
index c9d1c78..a8c7606 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -265,9 +265,7 @@
  * @info: An arbitrary pointer to pass to the function.
  * @wait: If true, wait until function has completed on other CPUs.
  *
- * Returns 0 on success, else a negative status code. Note that @wait
- * will be implicitly turned on in case of allocation failures, since
- * we fall back to on-stack allocation.
+ * Returns 0 on success, else a negative status code.
  */
 int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 			     int wait)
@@ -321,6 +319,51 @@
 }
 EXPORT_SYMBOL(smp_call_function_single);
 
+/*
+ * smp_call_function_any - Run a function on any of the given cpus
+ * @mask: The mask of cpus it can run on.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @wait: If true, wait until function has completed.
+ *
+ * Returns 0 on success, else a negative status code (if no cpus were online).
+ * Note that @wait will be implicitly turned on in case of allocation failures,
+ * since we fall back to on-stack allocation.
+ *
+ * Selection preference:
+ *	1) current cpu if in @mask
+ *	2) any cpu of current node if in @mask
+ *	3) any other online cpu in @mask
+ */
+int smp_call_function_any(const struct cpumask *mask,
+			  void (*func)(void *info), void *info, int wait)
+{
+	unsigned int cpu;
+	const struct cpumask *nodemask;
+	int ret;
+
+	/* Try for same CPU (cheapest) */
+	cpu = get_cpu();
+	if (cpumask_test_cpu(cpu, mask))
+		goto call;
+
+	/* Try for same node. */
+	nodemask = cpumask_of_node(cpu);
+	for (cpu = cpumask_first_and(nodemask, mask); cpu < nr_cpu_ids;
+	     cpu = cpumask_next_and(cpu, nodemask, mask)) {
+		if (cpu_online(cpu))
+			goto call;
+	}
+
+	/* Any online will do: smp_call_function_single handles nr_cpu_ids. */
+	cpu = cpumask_any_and(mask, cpu_online_mask);
+call:
+	ret = smp_call_function_single(cpu, func, info, wait);
+	put_cpu();
+	return ret;
+}
+EXPORT_SYMBOL_GPL(smp_call_function_any);
+
 /**
  * __smp_call_function_single(): Run a function on another CPU
  * @cpu: The CPU to run on.
@@ -355,9 +398,7 @@
  * @wait: If true, wait (atomically) until function has completed
  *        on other CPUs.
  *
- * If @wait is true, then returns once @func has returned. Note that @wait
- * will be implicitly turned on in case of allocation failures, since
- * we fall back to on-stack allocation.
+ * If @wait is true, then returns once @func has returned.
  *
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler. Preemption
@@ -443,8 +484,7 @@
  * Returns 0.
  *
  * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func. In case of allocation
- * failure, @wait will be implicitly turned on.
+ * it returns just before the target cpu calls @func.
  *
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler.
diff --git a/kernel/softirq.c b/kernel/softirq.c
index f8749e5..21939d9 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -302,9 +302,9 @@
 	if (!in_interrupt() && local_softirq_pending())
 		invoke_softirq();
 
+	rcu_irq_exit();
 #ifdef CONFIG_NO_HZ
 	/* Make sure that timer wheel updates are propagated */
-	rcu_irq_exit();
 	if (idle_cpu(smp_processor_id()) && !in_interrupt() && !need_resched())
 		tick_nohz_stop_sched_tick(0);
 #endif
diff --git a/kernel/spinlock.c b/kernel/spinlock.c
index 5ddab73..41e0422 100644
--- a/kernel/spinlock.c
+++ b/kernel/spinlock.c
@@ -21,145 +21,28 @@
 #include <linux/debug_locks.h>
 #include <linux/module.h>
 
-#ifndef _spin_trylock
-int __lockfunc _spin_trylock(spinlock_t *lock)
-{
-	return __spin_trylock(lock);
-}
-EXPORT_SYMBOL(_spin_trylock);
-#endif
-
-#ifndef _read_trylock
-int __lockfunc _read_trylock(rwlock_t *lock)
-{
-	return __read_trylock(lock);
-}
-EXPORT_SYMBOL(_read_trylock);
-#endif
-
-#ifndef _write_trylock
-int __lockfunc _write_trylock(rwlock_t *lock)
-{
-	return __write_trylock(lock);
-}
-EXPORT_SYMBOL(_write_trylock);
-#endif
-
 /*
  * If lockdep is enabled then we use the non-preemption spin-ops
  * even on CONFIG_PREEMPT, because lockdep assumes that interrupts are
  * not re-enabled during lock-acquire (which the preempt-spin-ops do):
  */
 #if !defined(CONFIG_GENERIC_LOCKBREAK) || defined(CONFIG_DEBUG_LOCK_ALLOC)
-
-#ifndef _read_lock
-void __lockfunc _read_lock(rwlock_t *lock)
-{
-	__read_lock(lock);
-}
-EXPORT_SYMBOL(_read_lock);
-#endif
-
-#ifndef _spin_lock_irqsave
-unsigned long __lockfunc _spin_lock_irqsave(spinlock_t *lock)
-{
-	return __spin_lock_irqsave(lock);
-}
-EXPORT_SYMBOL(_spin_lock_irqsave);
-#endif
-
-#ifndef _spin_lock_irq
-void __lockfunc _spin_lock_irq(spinlock_t *lock)
-{
-	__spin_lock_irq(lock);
-}
-EXPORT_SYMBOL(_spin_lock_irq);
-#endif
-
-#ifndef _spin_lock_bh
-void __lockfunc _spin_lock_bh(spinlock_t *lock)
-{
-	__spin_lock_bh(lock);
-}
-EXPORT_SYMBOL(_spin_lock_bh);
-#endif
-
-#ifndef _read_lock_irqsave
-unsigned long __lockfunc _read_lock_irqsave(rwlock_t *lock)
-{
-	return __read_lock_irqsave(lock);
-}
-EXPORT_SYMBOL(_read_lock_irqsave);
-#endif
-
-#ifndef _read_lock_irq
-void __lockfunc _read_lock_irq(rwlock_t *lock)
-{
-	__read_lock_irq(lock);
-}
-EXPORT_SYMBOL(_read_lock_irq);
-#endif
-
-#ifndef _read_lock_bh
-void __lockfunc _read_lock_bh(rwlock_t *lock)
-{
-	__read_lock_bh(lock);
-}
-EXPORT_SYMBOL(_read_lock_bh);
-#endif
-
-#ifndef _write_lock_irqsave
-unsigned long __lockfunc _write_lock_irqsave(rwlock_t *lock)
-{
-	return __write_lock_irqsave(lock);
-}
-EXPORT_SYMBOL(_write_lock_irqsave);
-#endif
-
-#ifndef _write_lock_irq
-void __lockfunc _write_lock_irq(rwlock_t *lock)
-{
-	__write_lock_irq(lock);
-}
-EXPORT_SYMBOL(_write_lock_irq);
-#endif
-
-#ifndef _write_lock_bh
-void __lockfunc _write_lock_bh(rwlock_t *lock)
-{
-	__write_lock_bh(lock);
-}
-EXPORT_SYMBOL(_write_lock_bh);
-#endif
-
-#ifndef _spin_lock
-void __lockfunc _spin_lock(spinlock_t *lock)
-{
-	__spin_lock(lock);
-}
-EXPORT_SYMBOL(_spin_lock);
-#endif
-
-#ifndef _write_lock
-void __lockfunc _write_lock(rwlock_t *lock)
-{
-	__write_lock(lock);
-}
-EXPORT_SYMBOL(_write_lock);
-#endif
-
-#else /* CONFIG_PREEMPT: */
-
 /*
+ * The __lock_function inlines are taken from
+ * include/linux/spinlock_api_smp.h
+ */
+#else
+/*
+ * We build the __lock_function inlines here. They are too large for
+ * inlining all over the place, but here is only one user per function
+ * which embedds them into the calling _lock_function below.
+ *
  * This could be a long-held lock. We both prepare to spin for a long
  * time (making _this_ CPU preemptable if possible), and we also signal
  * towards that other CPU that it should break the lock ASAP.
- *
- * (We do this in a function because inlining it would be excessive.)
  */
-
 #define BUILD_LOCK_OPS(op, locktype)					\
-void __lockfunc _##op##_lock(locktype##_t *lock)			\
+void __lockfunc __##op##_lock(locktype##_t *lock)			\
 {									\
 	for (;;) {							\
 		preempt_disable();					\
@@ -175,9 +58,7 @@
 	(lock)->break_lock = 0;						\
 }									\
 									\
-EXPORT_SYMBOL(_##op##_lock);						\
-									\
-unsigned long __lockfunc _##op##_lock_irqsave(locktype##_t *lock)	\
+unsigned long __lockfunc __##op##_lock_irqsave(locktype##_t *lock)	\
 {									\
 	unsigned long flags;						\
 									\
@@ -198,16 +79,12 @@
 	return flags;							\
 }									\
 									\
-EXPORT_SYMBOL(_##op##_lock_irqsave);					\
-									\
-void __lockfunc _##op##_lock_irq(locktype##_t *lock)			\
+void __lockfunc __##op##_lock_irq(locktype##_t *lock)			\
 {									\
 	_##op##_lock_irqsave(lock);					\
 }									\
 									\
-EXPORT_SYMBOL(_##op##_lock_irq);					\
-									\
-void __lockfunc _##op##_lock_bh(locktype##_t *lock)			\
+void __lockfunc __##op##_lock_bh(locktype##_t *lock)			\
 {									\
 	unsigned long flags;						\
 									\
@@ -220,23 +97,21 @@
 	local_bh_disable();						\
 	local_irq_restore(flags);					\
 }									\
-									\
-EXPORT_SYMBOL(_##op##_lock_bh)
 
 /*
  * Build preemption-friendly versions of the following
  * lock-spinning functions:
  *
- *         _[spin|read|write]_lock()
- *         _[spin|read|write]_lock_irq()
- *         _[spin|read|write]_lock_irqsave()
- *         _[spin|read|write]_lock_bh()
+ *         __[spin|read|write]_lock()
+ *         __[spin|read|write]_lock_irq()
+ *         __[spin|read|write]_lock_irqsave()
+ *         __[spin|read|write]_lock_bh()
  */
 BUILD_LOCK_OPS(spin, spinlock);
 BUILD_LOCK_OPS(read, rwlock);
 BUILD_LOCK_OPS(write, rwlock);
 
-#endif /* CONFIG_PREEMPT */
+#endif
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 
@@ -248,7 +123,8 @@
 }
 EXPORT_SYMBOL(_spin_lock_nested);
 
-unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclass)
+unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock,
+						   int subclass)
 {
 	unsigned long flags;
 
@@ -272,7 +148,127 @@
 
 #endif
 
-#ifndef _spin_unlock
+#ifndef CONFIG_INLINE_SPIN_TRYLOCK
+int __lockfunc _spin_trylock(spinlock_t *lock)
+{
+	return __spin_trylock(lock);
+}
+EXPORT_SYMBOL(_spin_trylock);
+#endif
+
+#ifndef CONFIG_INLINE_READ_TRYLOCK
+int __lockfunc _read_trylock(rwlock_t *lock)
+{
+	return __read_trylock(lock);
+}
+EXPORT_SYMBOL(_read_trylock);
+#endif
+
+#ifndef CONFIG_INLINE_WRITE_TRYLOCK
+int __lockfunc _write_trylock(rwlock_t *lock)
+{
+	return __write_trylock(lock);
+}
+EXPORT_SYMBOL(_write_trylock);
+#endif
+
+#ifndef CONFIG_INLINE_READ_LOCK
+void __lockfunc _read_lock(rwlock_t *lock)
+{
+	__read_lock(lock);
+}
+EXPORT_SYMBOL(_read_lock);
+#endif
+
+#ifndef CONFIG_INLINE_SPIN_LOCK_IRQSAVE
+unsigned long __lockfunc _spin_lock_irqsave(spinlock_t *lock)
+{
+	return __spin_lock_irqsave(lock);
+}
+EXPORT_SYMBOL(_spin_lock_irqsave);
+#endif
+
+#ifndef CONFIG_INLINE_SPIN_LOCK_IRQ
+void __lockfunc _spin_lock_irq(spinlock_t *lock)
+{
+	__spin_lock_irq(lock);
+}
+EXPORT_SYMBOL(_spin_lock_irq);
+#endif
+
+#ifndef CONFIG_INLINE_SPIN_LOCK_BH
+void __lockfunc _spin_lock_bh(spinlock_t *lock)
+{
+	__spin_lock_bh(lock);
+}
+EXPORT_SYMBOL(_spin_lock_bh);
+#endif
+
+#ifndef CONFIG_INLINE_READ_LOCK_IRQSAVE
+unsigned long __lockfunc _read_lock_irqsave(rwlock_t *lock)
+{
+	return __read_lock_irqsave(lock);
+}
+EXPORT_SYMBOL(_read_lock_irqsave);
+#endif
+
+#ifndef CONFIG_INLINE_READ_LOCK_IRQ
+void __lockfunc _read_lock_irq(rwlock_t *lock)
+{
+	__read_lock_irq(lock);
+}
+EXPORT_SYMBOL(_read_lock_irq);
+#endif
+
+#ifndef CONFIG_INLINE_READ_LOCK_BH
+void __lockfunc _read_lock_bh(rwlock_t *lock)
+{
+	__read_lock_bh(lock);
+}
+EXPORT_SYMBOL(_read_lock_bh);
+#endif
+
+#ifndef CONFIG_INLINE_WRITE_LOCK_IRQSAVE
+unsigned long __lockfunc _write_lock_irqsave(rwlock_t *lock)
+{
+	return __write_lock_irqsave(lock);
+}
+EXPORT_SYMBOL(_write_lock_irqsave);
+#endif
+
+#ifndef CONFIG_INLINE_WRITE_LOCK_IRQ
+void __lockfunc _write_lock_irq(rwlock_t *lock)
+{
+	__write_lock_irq(lock);
+}
+EXPORT_SYMBOL(_write_lock_irq);
+#endif
+
+#ifndef CONFIG_INLINE_WRITE_LOCK_BH
+void __lockfunc _write_lock_bh(rwlock_t *lock)
+{
+	__write_lock_bh(lock);
+}
+EXPORT_SYMBOL(_write_lock_bh);
+#endif
+
+#ifndef CONFIG_INLINE_SPIN_LOCK
+void __lockfunc _spin_lock(spinlock_t *lock)
+{
+	__spin_lock(lock);
+}
+EXPORT_SYMBOL(_spin_lock);
+#endif
+
+#ifndef CONFIG_INLINE_WRITE_LOCK
+void __lockfunc _write_lock(rwlock_t *lock)
+{
+	__write_lock(lock);
+}
+EXPORT_SYMBOL(_write_lock);
+#endif
+
+#ifndef CONFIG_INLINE_SPIN_UNLOCK
 void __lockfunc _spin_unlock(spinlock_t *lock)
 {
 	__spin_unlock(lock);
@@ -280,7 +276,7 @@
 EXPORT_SYMBOL(_spin_unlock);
 #endif
 
-#ifndef _write_unlock
+#ifndef CONFIG_INLINE_WRITE_UNLOCK
 void __lockfunc _write_unlock(rwlock_t *lock)
 {
 	__write_unlock(lock);
@@ -288,7 +284,7 @@
 EXPORT_SYMBOL(_write_unlock);
 #endif
 
-#ifndef _read_unlock
+#ifndef CONFIG_INLINE_READ_UNLOCK
 void __lockfunc _read_unlock(rwlock_t *lock)
 {
 	__read_unlock(lock);
@@ -296,7 +292,7 @@
 EXPORT_SYMBOL(_read_unlock);
 #endif
 
-#ifndef _spin_unlock_irqrestore
+#ifndef CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE
 void __lockfunc _spin_unlock_irqrestore(spinlock_t *lock, unsigned long flags)
 {
 	__spin_unlock_irqrestore(lock, flags);
@@ -304,7 +300,7 @@
 EXPORT_SYMBOL(_spin_unlock_irqrestore);
 #endif
 
-#ifndef _spin_unlock_irq
+#ifndef CONFIG_INLINE_SPIN_UNLOCK_IRQ
 void __lockfunc _spin_unlock_irq(spinlock_t *lock)
 {
 	__spin_unlock_irq(lock);
@@ -312,7 +308,7 @@
 EXPORT_SYMBOL(_spin_unlock_irq);
 #endif
 
-#ifndef _spin_unlock_bh
+#ifndef CONFIG_INLINE_SPIN_UNLOCK_BH
 void __lockfunc _spin_unlock_bh(spinlock_t *lock)
 {
 	__spin_unlock_bh(lock);
@@ -320,7 +316,7 @@
 EXPORT_SYMBOL(_spin_unlock_bh);
 #endif
 
-#ifndef _read_unlock_irqrestore
+#ifndef CONFIG_INLINE_READ_UNLOCK_IRQRESTORE
 void __lockfunc _read_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
 {
 	__read_unlock_irqrestore(lock, flags);
@@ -328,7 +324,7 @@
 EXPORT_SYMBOL(_read_unlock_irqrestore);
 #endif
 
-#ifndef _read_unlock_irq
+#ifndef CONFIG_INLINE_READ_UNLOCK_IRQ
 void __lockfunc _read_unlock_irq(rwlock_t *lock)
 {
 	__read_unlock_irq(lock);
@@ -336,7 +332,7 @@
 EXPORT_SYMBOL(_read_unlock_irq);
 #endif
 
-#ifndef _read_unlock_bh
+#ifndef CONFIG_INLINE_READ_UNLOCK_BH
 void __lockfunc _read_unlock_bh(rwlock_t *lock)
 {
 	__read_unlock_bh(lock);
@@ -344,7 +340,7 @@
 EXPORT_SYMBOL(_read_unlock_bh);
 #endif
 
-#ifndef _write_unlock_irqrestore
+#ifndef CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE
 void __lockfunc _write_unlock_irqrestore(rwlock_t *lock, unsigned long flags)
 {
 	__write_unlock_irqrestore(lock, flags);
@@ -352,7 +348,7 @@
 EXPORT_SYMBOL(_write_unlock_irqrestore);
 #endif
 
-#ifndef _write_unlock_irq
+#ifndef CONFIG_INLINE_WRITE_UNLOCK_IRQ
 void __lockfunc _write_unlock_irq(rwlock_t *lock)
 {
 	__write_unlock_irq(lock);
@@ -360,7 +356,7 @@
 EXPORT_SYMBOL(_write_unlock_irq);
 #endif
 
-#ifndef _write_unlock_bh
+#ifndef CONFIG_INLINE_WRITE_UNLOCK_BH
 void __lockfunc _write_unlock_bh(rwlock_t *lock)
 {
 	__write_unlock_bh(lock);
@@ -368,7 +364,7 @@
 EXPORT_SYMBOL(_write_unlock_bh);
 #endif
 
-#ifndef _spin_trylock_bh
+#ifndef CONFIG_INLINE_SPIN_TRYLOCK_BH
 int __lockfunc _spin_trylock_bh(spinlock_t *lock)
 {
 	return __spin_trylock_bh(lock);
diff --git a/kernel/srcu.c b/kernel/srcu.c
index b0aeeaf..818d7d9 100644
--- a/kernel/srcu.c
+++ b/kernel/srcu.c
@@ -49,6 +49,7 @@
 	sp->per_cpu_ref = alloc_percpu(struct srcu_struct_array);
 	return (sp->per_cpu_ref ? 0 : -ENOMEM);
 }
+EXPORT_SYMBOL_GPL(init_srcu_struct);
 
 /*
  * srcu_readers_active_idx -- returns approximate number of readers
@@ -97,6 +98,7 @@
 	free_percpu(sp->per_cpu_ref);
 	sp->per_cpu_ref = NULL;
 }
+EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
 
 /**
  * srcu_read_lock - register a new reader for an SRCU-protected structure.
@@ -118,6 +120,7 @@
 	preempt_enable();
 	return idx;
 }
+EXPORT_SYMBOL_GPL(srcu_read_lock);
 
 /**
  * srcu_read_unlock - unregister a old reader from an SRCU-protected structure.
@@ -136,22 +139,12 @@
 	per_cpu_ptr(sp->per_cpu_ref, smp_processor_id())->c[idx]--;
 	preempt_enable();
 }
+EXPORT_SYMBOL_GPL(srcu_read_unlock);
 
-/**
- * synchronize_srcu - wait for prior SRCU read-side critical-section completion
- * @sp: srcu_struct with which to synchronize.
- *
- * Flip the completed counter, and wait for the old count to drain to zero.
- * As with classic RCU, the updater must use some separate means of
- * synchronizing concurrent updates.  Can block; must be called from
- * process context.
- *
- * Note that it is illegal to call synchornize_srcu() from the corresponding
- * SRCU read-side critical section; doing so will result in deadlock.
- * However, it is perfectly legal to call synchronize_srcu() on one
- * srcu_struct from some other srcu_struct's read-side critical section.
+/*
+ * Helper function for synchronize_srcu() and synchronize_srcu_expedited().
  */
-void synchronize_srcu(struct srcu_struct *sp)
+void __synchronize_srcu(struct srcu_struct *sp, void (*sync_func)(void))
 {
 	int idx;
 
@@ -173,7 +166,7 @@
 		return;
 	}
 
-	synchronize_sched();  /* Force memory barrier on all CPUs. */
+	sync_func();  /* Force memory barrier on all CPUs. */
 
 	/*
 	 * The preceding synchronize_sched() ensures that any CPU that
@@ -190,7 +183,7 @@
 	idx = sp->completed & 0x1;
 	sp->completed++;
 
-	synchronize_sched();  /* Force memory barrier on all CPUs. */
+	sync_func();  /* Force memory barrier on all CPUs. */
 
 	/*
 	 * At this point, because of the preceding synchronize_sched(),
@@ -203,7 +196,7 @@
 	while (srcu_readers_active_idx(sp, idx))
 		schedule_timeout_interruptible(1);
 
-	synchronize_sched();  /* Force memory barrier on all CPUs. */
+	sync_func();  /* Force memory barrier on all CPUs. */
 
 	/*
 	 * The preceding synchronize_sched() forces all srcu_read_unlock()
@@ -237,6 +230,47 @@
 }
 
 /**
+ * synchronize_srcu - wait for prior SRCU read-side critical-section completion
+ * @sp: srcu_struct with which to synchronize.
+ *
+ * Flip the completed counter, and wait for the old count to drain to zero.
+ * As with classic RCU, the updater must use some separate means of
+ * synchronizing concurrent updates.  Can block; must be called from
+ * process context.
+ *
+ * Note that it is illegal to call synchronize_srcu() from the corresponding
+ * SRCU read-side critical section; doing so will result in deadlock.
+ * However, it is perfectly legal to call synchronize_srcu() on one
+ * srcu_struct from some other srcu_struct's read-side critical section.
+ */
+void synchronize_srcu(struct srcu_struct *sp)
+{
+	__synchronize_srcu(sp, synchronize_sched);
+}
+EXPORT_SYMBOL_GPL(synchronize_srcu);
+
+/**
+ * synchronize_srcu_expedited - like synchronize_srcu, but less patient
+ * @sp: srcu_struct with which to synchronize.
+ *
+ * Flip the completed counter, and wait for the old count to drain to zero.
+ * As with classic RCU, the updater must use some separate means of
+ * synchronizing concurrent updates.  Can block; must be called from
+ * process context.
+ *
+ * Note that it is illegal to call synchronize_srcu_expedited()
+ * from the corresponding SRCU read-side critical section; doing so
+ * will result in deadlock.  However, it is perfectly legal to call
+ * synchronize_srcu_expedited() on one srcu_struct from some other
+ * srcu_struct's read-side critical section.
+ */
+void synchronize_srcu_expedited(struct srcu_struct *sp)
+{
+	__synchronize_srcu(sp, synchronize_sched_expedited);
+}
+EXPORT_SYMBOL_GPL(synchronize_srcu_expedited);
+
+/**
  * srcu_batches_completed - return batches completed.
  * @sp: srcu_struct on which to report batch completion.
  *
@@ -248,10 +282,4 @@
 {
 	return sp->completed;
 }
-
-EXPORT_SYMBOL_GPL(init_srcu_struct);
-EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
-EXPORT_SYMBOL_GPL(srcu_read_lock);
-EXPORT_SYMBOL_GPL(srcu_read_unlock);
-EXPORT_SYMBOL_GPL(synchronize_srcu);
 EXPORT_SYMBOL_GPL(srcu_batches_completed);
diff --git a/kernel/sys.c b/kernel/sys.c
index ce17760..9968c5f 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -911,16 +911,15 @@
 
 void do_sys_times(struct tms *tms)
 {
-	struct task_cputime cputime;
-	cputime_t cutime, cstime;
+	cputime_t tgutime, tgstime, cutime, cstime;
 
-	thread_group_cputime(current, &cputime);
 	spin_lock_irq(&current->sighand->siglock);
+	thread_group_times(current, &tgutime, &tgstime);
 	cutime = current->signal->cutime;
 	cstime = current->signal->cstime;
 	spin_unlock_irq(&current->sighand->siglock);
-	tms->tms_utime = cputime_to_clock_t(cputime.utime);
-	tms->tms_stime = cputime_to_clock_t(cputime.stime);
+	tms->tms_utime = cputime_to_clock_t(tgutime);
+	tms->tms_stime = cputime_to_clock_t(tgstime);
 	tms->tms_cutime = cputime_to_clock_t(cutime);
 	tms->tms_cstime = cputime_to_clock_t(cstime);
 }
@@ -1338,16 +1337,14 @@
 {
 	struct task_struct *t;
 	unsigned long flags;
-	cputime_t utime, stime;
-	struct task_cputime cputime;
+	cputime_t tgutime, tgstime, utime, stime;
 	unsigned long maxrss = 0;
 
 	memset((char *) r, 0, sizeof *r);
 	utime = stime = cputime_zero;
 
 	if (who == RUSAGE_THREAD) {
-		utime = task_utime(current);
-		stime = task_stime(current);
+		task_times(current, &utime, &stime);
 		accumulate_thread_rusage(p, r);
 		maxrss = p->signal->maxrss;
 		goto out;
@@ -1373,9 +1370,9 @@
 				break;
 
 		case RUSAGE_SELF:
-			thread_group_cputime(p, &cputime);
-			utime = cputime_add(utime, cputime.utime);
-			stime = cputime_add(stime, cputime.stime);
+			thread_group_times(p, &tgutime, &tgstime);
+			utime = cputime_add(utime, tgutime);
+			stime = cputime_add(stime, tgstime);
 			r->ru_nvcsw += p->signal->nvcsw;
 			r->ru_nivcsw += p->signal->nivcsw;
 			r->ru_minflt += p->signal->min_flt;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index e06d0b8..695384f 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -48,8 +48,10 @@
 cond_syscall(sys_sendmsg);
 cond_syscall(compat_sys_sendmsg);
 cond_syscall(sys_recvmsg);
+cond_syscall(sys_recvmmsg);
 cond_syscall(compat_sys_recvmsg);
 cond_syscall(compat_sys_recvfrom);
+cond_syscall(compat_sys_recvmmsg);
 cond_syscall(sys_socketcall);
 cond_syscall(sys_futex);
 cond_syscall(compat_sys_futex);
@@ -139,7 +141,6 @@
 cond_syscall(sys_pciconfig_write);
 cond_syscall(sys_pciconfig_iobase);
 cond_syscall(sys32_ipc);
-cond_syscall(sys32_sysctl);
 cond_syscall(ppc_rtas);
 cond_syscall(sys_spu_run);
 cond_syscall(sys_spu_create);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 0d949c5..9327a26 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -27,7 +27,6 @@
 #include <linux/security.h>
 #include <linux/ctype.h>
 #include <linux/kmemcheck.h>
-#include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -36,6 +35,7 @@
 #include <linux/sysrq.h>
 #include <linux/highuid.h>
 #include <linux/writeback.h>
+#include <linux/ratelimit.h>
 #include <linux/hugetlb.h>
 #include <linux/initrd.h>
 #include <linux/key.h>
@@ -60,7 +60,6 @@
 #include <asm/io.h>
 #endif
 
-static int deprecated_sysctl_warning(struct __sysctl_args *args);
 
 #if defined(CONFIG_SYSCTL)
 
@@ -158,6 +157,8 @@
 extern int unaligned_dump_stack;
 #endif
 
+extern struct ratelimit_state printk_ratelimit_state;
+
 #ifdef CONFIG_RT_MUTEXES
 extern int max_lock_depth;
 #endif
@@ -207,31 +208,26 @@
 
 static struct ctl_table root_table[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= kern_table,
 	},
 	{
-		.ctl_name	= CTL_VM,
 		.procname	= "vm",
 		.mode		= 0555,
 		.child		= vm_table,
 	},
 	{
-		.ctl_name	= CTL_FS,
 		.procname	= "fs",
 		.mode		= 0555,
 		.child		= fs_table,
 	},
 	{
-		.ctl_name	= CTL_DEBUG,
 		.procname	= "debug",
 		.mode		= 0555,
 		.child		= debug_table,
 	},
 	{
-		.ctl_name	= CTL_DEV,
 		.procname	= "dev",
 		.mode		= 0555,
 		.child		= dev_table,
@@ -240,7 +236,7 @@
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
  */
-	{ .ctl_name = 0 }
+	{ }
 };
 
 #ifdef CONFIG_SCHED_DEBUG
@@ -252,192 +248,166 @@
 
 static struct ctl_table kern_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_child_runs_first",
 		.data		= &sysctl_sched_child_runs_first,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_SCHED_DEBUG
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_min_granularity_ns",
 		.data		= &sysctl_sched_min_granularity,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &sched_nr_latency_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= sched_nr_latency_handler,
 		.extra1		= &min_sched_granularity_ns,
 		.extra2		= &max_sched_granularity_ns,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_latency_ns",
 		.data		= &sysctl_sched_latency,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &sched_nr_latency_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= sched_nr_latency_handler,
 		.extra1		= &min_sched_granularity_ns,
 		.extra2		= &max_sched_granularity_ns,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_wakeup_granularity_ns",
 		.data		= &sysctl_sched_wakeup_granularity,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_wakeup_granularity_ns,
 		.extra2		= &max_wakeup_granularity_ns,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_shares_ratelimit",
 		.data		= &sysctl_sched_shares_ratelimit,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_shares_thresh",
 		.data		= &sysctl_sched_shares_thresh,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_features",
 		.data		= &sysctl_sched_features,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_migration_cost",
 		.data		= &sysctl_sched_migration_cost,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_nr_migrate",
 		.data		= &sysctl_sched_nr_migrate,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_time_avg",
 		.data		= &sysctl_sched_time_avg,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "timer_migration",
 		.data		= &sysctl_timer_migration,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_rt_period_us",
 		.data		= &sysctl_sched_rt_period,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &sched_rt_handler,
+		.proc_handler	= sched_rt_handler,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_rt_runtime_us",
 		.data		= &sysctl_sched_rt_runtime,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &sched_rt_handler,
+		.proc_handler	= sched_rt_handler,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sched_compat_yield",
 		.data		= &sysctl_sched_compat_yield,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_PROVE_LOCKING
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "prove_locking",
 		.data		= &prove_locking,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_LOCK_STAT
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "lock_stat",
 		.data		= &lock_stat,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 	{
-		.ctl_name	= KERN_PANIC,
 		.procname	= "panic",
 		.data		= &panic_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_CORE_USES_PID,
 		.procname	= "core_uses_pid",
 		.data		= &core_uses_pid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_CORE_PATTERN,
 		.procname	= "core_pattern",
 		.data		= core_pattern,
 		.maxlen		= CORENAME_MAX_SIZE,
 		.mode		= 0644,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string,
+		.proc_handler	= proc_dostring,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "core_pipe_limit",
 		.data		= &core_pipe_limit,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_PROC_SYSCTL
 	{
 		.procname	= "tainted",
 		.maxlen 	= sizeof(long),
 		.mode		= 0644,
-		.proc_handler	= &proc_taint,
+		.proc_handler	= proc_taint,
 	},
 #endif
 #ifdef CONFIG_LATENCYTOP
@@ -446,181 +416,160 @@
 		.data		= &latencytop_enabled,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
-		.ctl_name	= KERN_REALROOTDEV,
 		.procname	= "real-root-dev",
 		.data		= &real_root_dev,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "print-fatal-signals",
 		.data		= &print_fatal_signals,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_SPARC
 	{
-		.ctl_name	= KERN_SPARC_REBOOT,
 		.procname	= "reboot-cmd",
 		.data		= reboot_command,
 		.maxlen		= 256,
 		.mode		= 0644,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string,
+		.proc_handler	= proc_dostring,
 	},
 	{
-		.ctl_name	= KERN_SPARC_STOP_A,
 		.procname	= "stop-a",
 		.data		= &stop_a_enabled,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_SPARC_SCONS_PWROFF,
 		.procname	= "scons-poweroff",
 		.data		= &scons_pwroff,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_SPARC64
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "tsb-ratio",
 		.data		= &sysctl_tsb_ratio,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef __hppa__
 	{
-		.ctl_name	= KERN_HPPA_PWRSW,
 		.procname	= "soft-power",
 		.data		= &pwrsw_enabled,
 		.maxlen		= sizeof (int),
 	 	.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_HPPA_UNALIGNED,
 		.procname	= "unaligned-trap",
 		.data		= &unaligned_enabled,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 	{
-		.ctl_name	= KERN_CTLALTDEL,
 		.procname	= "ctrl-alt-del",
 		.data		= &C_A_D,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #ifdef CONFIG_FUNCTION_TRACER
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "ftrace_enabled",
 		.data		= &ftrace_enabled,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &ftrace_enable_sysctl,
+		.proc_handler	= ftrace_enable_sysctl,
 	},
 #endif
 #ifdef CONFIG_STACK_TRACER
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "stack_tracer_enabled",
 		.data		= &stack_tracer_enabled,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &stack_trace_sysctl,
+		.proc_handler	= stack_trace_sysctl,
 	},
 #endif
 #ifdef CONFIG_TRACING
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "ftrace_dump_on_oops",
 		.data		= &ftrace_dump_on_oops,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_MODULES
 	{
-		.ctl_name	= KERN_MODPROBE,
 		.procname	= "modprobe",
 		.data		= &modprobe_path,
 		.maxlen		= KMOD_PATH_LEN,
 		.mode		= 0644,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string,
+		.proc_handler	= proc_dostring,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "modules_disabled",
 		.data		= &modules_disabled,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		/* only handle a transition from default "0" to "1" */
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &one,
 		.extra2		= &one,
 	},
 #endif
 #if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
 	{
-		.ctl_name	= KERN_HOTPLUG,
 		.procname	= "hotplug",
 		.data		= &uevent_helper,
 		.maxlen		= UEVENT_HELPER_PATH_LEN,
 		.mode		= 0644,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string,
+		.proc_handler	= proc_dostring,
 	},
 #endif
 #ifdef CONFIG_CHR_DEV_SG
 	{
-		.ctl_name	= KERN_SG_BIG_BUFF,
 		.procname	= "sg-big-buff",
 		.data		= &sg_big_buff,
 		.maxlen		= sizeof (int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_BSD_PROCESS_ACCT
 	{
-		.ctl_name	= KERN_ACCT,
 		.procname	= "acct",
 		.data		= &acct_parm,
 		.maxlen		= 3*sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_MAGIC_SYSRQ
 	{
-		.ctl_name	= KERN_SYSRQ,
 		.procname	= "sysrq",
 		.data		= &__sysrq_enabled,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_PROC_SYSCTL
@@ -629,215 +578,188 @@
 		.data		= NULL,
 		.maxlen		= sizeof (int),
 		.mode		= 0600,
-		.proc_handler	= &proc_do_cad_pid,
+		.proc_handler	= proc_do_cad_pid,
 	},
 #endif
 	{
-		.ctl_name	= KERN_MAX_THREADS,
 		.procname	= "threads-max",
 		.data		= &max_threads,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_RANDOM,
 		.procname	= "random",
 		.mode		= 0555,
 		.child		= random_table,
 	},
 	{
-		.ctl_name	= KERN_OVERFLOWUID,
 		.procname	= "overflowuid",
 		.data		= &overflowuid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &minolduid,
 		.extra2		= &maxolduid,
 	},
 	{
-		.ctl_name	= KERN_OVERFLOWGID,
 		.procname	= "overflowgid",
 		.data		= &overflowgid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &minolduid,
 		.extra2		= &maxolduid,
 	},
 #ifdef CONFIG_S390
 #ifdef CONFIG_MATHEMU
 	{
-		.ctl_name	= KERN_IEEE_EMULATION_WARNINGS,
 		.procname	= "ieee_emulation_warnings",
 		.data		= &sysctl_ieee_emulation_warnings,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 	{
-		.ctl_name	= KERN_S390_USER_DEBUG_LOGGING,
 		.procname	= "userprocess_debug",
 		.data		= &sysctl_userprocess_debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 	{
-		.ctl_name	= KERN_PIDMAX,
 		.procname	= "pid_max",
 		.data		= &pid_max,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &pid_max_min,
 		.extra2		= &pid_max_max,
 	},
 	{
-		.ctl_name	= KERN_PANIC_ON_OOPS,
 		.procname	= "panic_on_oops",
 		.data		= &panic_on_oops,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #if defined CONFIG_PRINTK
 	{
-		.ctl_name	= KERN_PRINTK,
 		.procname	= "printk",
 		.data		= &console_loglevel,
 		.maxlen		= 4*sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_PRINTK_RATELIMIT,
 		.procname	= "printk_ratelimit",
 		.data		= &printk_ratelimit_state.interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= KERN_PRINTK_RATELIMIT_BURST,
 		.procname	= "printk_ratelimit_burst",
 		.data		= &printk_ratelimit_state.burst,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "printk_delay",
 		.data		= &printk_delay_msec,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &ten_thousand,
 	},
 #endif
 	{
-		.ctl_name	= KERN_NGROUPS_MAX,
 		.procname	= "ngroups_max",
 		.data		= &ngroups_max,
 		.maxlen		= sizeof (int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
 	{
-		.ctl_name       = KERN_UNKNOWN_NMI_PANIC,
 		.procname       = "unknown_nmi_panic",
 		.data           = &unknown_nmi_panic,
 		.maxlen         = sizeof (int),
 		.mode           = 0644,
-		.proc_handler   = &proc_dointvec,
+		.proc_handler   = proc_dointvec,
 	},
 	{
 		.procname       = "nmi_watchdog",
 		.data           = &nmi_watchdog_enabled,
 		.maxlen         = sizeof (int),
 		.mode           = 0644,
-		.proc_handler   = &proc_nmi_enabled,
+		.proc_handler   = proc_nmi_enabled,
 	},
 #endif
 #if defined(CONFIG_X86)
 	{
-		.ctl_name	= KERN_PANIC_ON_NMI,
 		.procname	= "panic_on_unrecovered_nmi",
 		.data		= &panic_on_unrecovered_nmi,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "panic_on_io_nmi",
 		.data		= &panic_on_io_nmi,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= KERN_BOOTLOADER_TYPE,
 		.procname	= "bootloader_type",
 		.data		= &bootloader_type,
 		.maxlen		= sizeof (int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "bootloader_version",
 		.data		= &bootloader_version,
 		.maxlen		= sizeof (int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "kstack_depth_to_print",
 		.data		= &kstack_depth_to_print,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "io_delay_type",
 		.data		= &io_delay_type,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #if defined(CONFIG_MMU)
 	{
-		.ctl_name	= KERN_RANDOMIZE,
 		.procname	= "randomize_va_space",
 		.data		= &randomize_va_space,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #if defined(CONFIG_S390) && defined(CONFIG_SMP)
 	{
-		.ctl_name	= KERN_SPIN_RETRY,
 		.procname	= "spin_retry",
 		.data		= &spin_retry,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #if	defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
@@ -846,123 +768,104 @@
 		.data		= &acpi_realmode_flags,
 		.maxlen		= sizeof (unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 #endif
 #ifdef CONFIG_IA64
 	{
-		.ctl_name	= KERN_IA64_UNALIGNED,
 		.procname	= "ignore-unaligned-usertrap",
 		.data		= &no_unaligned_warning,
 		.maxlen		= sizeof (int),
 	 	.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "unaligned-dump-stack",
 		.data		= &unaligned_dump_stack,
 		.maxlen		= sizeof (int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "softlockup_panic",
 		.data		= &softlockup_panic,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "softlockup_thresh",
 		.data		= &softlockup_thresh,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dosoftlockup_thresh,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dosoftlockup_thresh,
 		.extra1		= &neg_one,
 		.extra2		= &sixty,
 	},
 #endif
 #ifdef CONFIG_DETECT_HUNG_TASK
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "hung_task_panic",
 		.data		= &sysctl_hung_task_panic,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "hung_task_check_count",
 		.data		= &sysctl_hung_task_check_count,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "hung_task_timeout_secs",
 		.data		= &sysctl_hung_task_timeout_secs,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_dohung_task_timeout_secs,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dohung_task_timeout_secs,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "hung_task_warnings",
 		.data		= &sysctl_hung_task_warnings,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 #endif
 #ifdef CONFIG_COMPAT
 	{
-		.ctl_name	= KERN_COMPAT_LOG,
 		.procname	= "compat-log",
 		.data		= &compat_log,
 		.maxlen		= sizeof (int),
 	 	.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_RT_MUTEXES
 	{
-		.ctl_name	= KERN_MAX_LOCK_DEPTH,
 		.procname	= "max_lock_depth",
 		.data		= &max_lock_depth,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "poweroff_cmd",
 		.data		= &poweroff_cmd,
 		.maxlen		= POWEROFF_CMD_PATH_LEN,
 		.mode		= 0644,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string,
+		.proc_handler	= proc_dostring,
 	},
 #ifdef CONFIG_KEYS
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "keys",
 		.mode		= 0555,
 		.child		= key_sysctls,
@@ -970,17 +873,15 @@
 #endif
 #ifdef CONFIG_RCU_TORTURE_TEST
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "rcutorture_runnable",
 		.data           = &rcutorture_runnable,
 		.maxlen         = sizeof(int),
 		.mode           = 0644,
-		.proc_handler   = &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_SLOW_WORK
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "slow-work",
 		.mode		= 0555,
 		.child		= slow_work_sysctls,
@@ -988,146 +889,127 @@
 #endif
 #ifdef CONFIG_PERF_EVENTS
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "perf_event_paranoid",
 		.data		= &sysctl_perf_event_paranoid,
 		.maxlen		= sizeof(sysctl_perf_event_paranoid),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "perf_event_mlock_kb",
 		.data		= &sysctl_perf_event_mlock,
 		.maxlen		= sizeof(sysctl_perf_event_mlock),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "perf_event_max_sample_rate",
 		.data		= &sysctl_perf_event_sample_rate,
 		.maxlen		= sizeof(sysctl_perf_event_sample_rate),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_KMEMCHECK
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "kmemcheck",
 		.data		= &kmemcheck_enabled,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_BLOCK
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "blk_iopoll",
 		.data		= &blk_iopoll_enabled,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 /*
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
  */
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table vm_table[] = {
 	{
-		.ctl_name	= VM_OVERCOMMIT_MEMORY,
 		.procname	= "overcommit_memory",
 		.data		= &sysctl_overcommit_memory,
 		.maxlen		= sizeof(sysctl_overcommit_memory),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= VM_PANIC_ON_OOM,
 		.procname	= "panic_on_oom",
 		.data		= &sysctl_panic_on_oom,
 		.maxlen		= sizeof(sysctl_panic_on_oom),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "oom_kill_allocating_task",
 		.data		= &sysctl_oom_kill_allocating_task,
 		.maxlen		= sizeof(sysctl_oom_kill_allocating_task),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "oom_dump_tasks",
 		.data		= &sysctl_oom_dump_tasks,
 		.maxlen		= sizeof(sysctl_oom_dump_tasks),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= VM_OVERCOMMIT_RATIO,
 		.procname	= "overcommit_ratio",
 		.data		= &sysctl_overcommit_ratio,
 		.maxlen		= sizeof(sysctl_overcommit_ratio),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= VM_PAGE_CLUSTER,
 		.procname	= "page-cluster", 
 		.data		= &page_cluster,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= VM_DIRTY_BACKGROUND,
 		.procname	= "dirty_background_ratio",
 		.data		= &dirty_background_ratio,
 		.maxlen		= sizeof(dirty_background_ratio),
 		.mode		= 0644,
-		.proc_handler	= &dirty_background_ratio_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= dirty_background_ratio_handler,
 		.extra1		= &zero,
 		.extra2		= &one_hundred,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "dirty_background_bytes",
 		.data		= &dirty_background_bytes,
 		.maxlen		= sizeof(dirty_background_bytes),
 		.mode		= 0644,
-		.proc_handler	= &dirty_background_bytes_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= dirty_background_bytes_handler,
 		.extra1		= &one_ul,
 	},
 	{
-		.ctl_name	= VM_DIRTY_RATIO,
 		.procname	= "dirty_ratio",
 		.data		= &vm_dirty_ratio,
 		.maxlen		= sizeof(vm_dirty_ratio),
 		.mode		= 0644,
-		.proc_handler	= &dirty_ratio_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= dirty_ratio_handler,
 		.extra1		= &zero,
 		.extra2		= &one_hundred,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "dirty_bytes",
 		.data		= &vm_dirty_bytes,
 		.maxlen		= sizeof(vm_dirty_bytes),
 		.mode		= 0644,
-		.proc_handler	= &dirty_bytes_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= dirty_bytes_handler,
 		.extra1		= &dirty_bytes_min,
 	},
 	{
@@ -1135,31 +1017,28 @@
 		.data		= &dirty_writeback_interval,
 		.maxlen		= sizeof(dirty_writeback_interval),
 		.mode		= 0644,
-		.proc_handler	= &dirty_writeback_centisecs_handler,
+		.proc_handler	= dirty_writeback_centisecs_handler,
 	},
 	{
 		.procname	= "dirty_expire_centisecs",
 		.data		= &dirty_expire_interval,
 		.maxlen		= sizeof(dirty_expire_interval),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= VM_NR_PDFLUSH_THREADS,
 		.procname	= "nr_pdflush_threads",
 		.data		= &nr_pdflush_threads,
 		.maxlen		= sizeof nr_pdflush_threads,
 		.mode		= 0444 /* read-only*/,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= VM_SWAPPINESS,
 		.procname	= "swappiness",
 		.data		= &vm_swappiness,
 		.maxlen		= sizeof(vm_swappiness),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one_hundred,
 	},
@@ -1169,255 +1048,213 @@
 		.data		= NULL,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &hugetlb_sysctl_handler,
+		.proc_handler	= hugetlb_sysctl_handler,
 		.extra1		= (void *)&hugetlb_zero,
 		.extra2		= (void *)&hugetlb_infinity,
 	 },
 	 {
-		.ctl_name	= VM_HUGETLB_GROUP,
 		.procname	= "hugetlb_shm_group",
 		.data		= &sysctl_hugetlb_shm_group,
 		.maxlen		= sizeof(gid_t),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	 },
 	 {
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "hugepages_treat_as_movable",
 		.data		= &hugepages_treat_as_movable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &hugetlb_treat_movable_handler,
+		.proc_handler	= hugetlb_treat_movable_handler,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nr_overcommit_hugepages",
 		.data		= NULL,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &hugetlb_overcommit_handler,
+		.proc_handler	= hugetlb_overcommit_handler,
 		.extra1		= (void *)&hugetlb_zero,
 		.extra2		= (void *)&hugetlb_infinity,
 	},
 #endif
 	{
-		.ctl_name	= VM_LOWMEM_RESERVE_RATIO,
 		.procname	= "lowmem_reserve_ratio",
 		.data		= &sysctl_lowmem_reserve_ratio,
 		.maxlen		= sizeof(sysctl_lowmem_reserve_ratio),
 		.mode		= 0644,
-		.proc_handler	= &lowmem_reserve_ratio_sysctl_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= lowmem_reserve_ratio_sysctl_handler,
 	},
 	{
-		.ctl_name	= VM_DROP_PAGECACHE,
 		.procname	= "drop_caches",
 		.data		= &sysctl_drop_caches,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= drop_caches_sysctl_handler,
-		.strategy	= &sysctl_intvec,
 	},
 	{
-		.ctl_name	= VM_MIN_FREE_KBYTES,
 		.procname	= "min_free_kbytes",
 		.data		= &min_free_kbytes,
 		.maxlen		= sizeof(min_free_kbytes),
 		.mode		= 0644,
-		.proc_handler	= &min_free_kbytes_sysctl_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= min_free_kbytes_sysctl_handler,
 		.extra1		= &zero,
 	},
 	{
-		.ctl_name	= VM_PERCPU_PAGELIST_FRACTION,
 		.procname	= "percpu_pagelist_fraction",
 		.data		= &percpu_pagelist_fraction,
 		.maxlen		= sizeof(percpu_pagelist_fraction),
 		.mode		= 0644,
-		.proc_handler	= &percpu_pagelist_fraction_sysctl_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= percpu_pagelist_fraction_sysctl_handler,
 		.extra1		= &min_percpu_pagelist_fract,
 	},
 #ifdef CONFIG_MMU
 	{
-		.ctl_name	= VM_MAX_MAP_COUNT,
 		.procname	= "max_map_count",
 		.data		= &sysctl_max_map_count,
 		.maxlen		= sizeof(sysctl_max_map_count),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec
+		.proc_handler	= proc_dointvec
 	},
 #else
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nr_trim_pages",
 		.data		= &sysctl_nr_trim_pages,
 		.maxlen		= sizeof(sysctl_nr_trim_pages),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 	},
 #endif
 	{
-		.ctl_name	= VM_LAPTOP_MODE,
 		.procname	= "laptop_mode",
 		.data		= &laptop_mode,
 		.maxlen		= sizeof(laptop_mode),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= VM_BLOCK_DUMP,
 		.procname	= "block_dump",
 		.data		= &block_dump,
 		.maxlen		= sizeof(block_dump),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 		.extra1		= &zero,
 	},
 	{
-		.ctl_name	= VM_VFS_CACHE_PRESSURE,
 		.procname	= "vfs_cache_pressure",
 		.data		= &sysctl_vfs_cache_pressure,
 		.maxlen		= sizeof(sysctl_vfs_cache_pressure),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 		.extra1		= &zero,
 	},
 #ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
 	{
-		.ctl_name	= VM_LEGACY_VA_LAYOUT,
 		.procname	= "legacy_va_layout",
 		.data		= &sysctl_legacy_va_layout,
 		.maxlen		= sizeof(sysctl_legacy_va_layout),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 		.extra1		= &zero,
 	},
 #endif
 #ifdef CONFIG_NUMA
 	{
-		.ctl_name	= VM_ZONE_RECLAIM_MODE,
 		.procname	= "zone_reclaim_mode",
 		.data		= &zone_reclaim_mode,
 		.maxlen		= sizeof(zone_reclaim_mode),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 		.extra1		= &zero,
 	},
 	{
-		.ctl_name	= VM_MIN_UNMAPPED,
 		.procname	= "min_unmapped_ratio",
 		.data		= &sysctl_min_unmapped_ratio,
 		.maxlen		= sizeof(sysctl_min_unmapped_ratio),
 		.mode		= 0644,
-		.proc_handler	= &sysctl_min_unmapped_ratio_sysctl_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= sysctl_min_unmapped_ratio_sysctl_handler,
 		.extra1		= &zero,
 		.extra2		= &one_hundred,
 	},
 	{
-		.ctl_name	= VM_MIN_SLAB,
 		.procname	= "min_slab_ratio",
 		.data		= &sysctl_min_slab_ratio,
 		.maxlen		= sizeof(sysctl_min_slab_ratio),
 		.mode		= 0644,
-		.proc_handler	= &sysctl_min_slab_ratio_sysctl_handler,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= sysctl_min_slab_ratio_sysctl_handler,
 		.extra1		= &zero,
 		.extra2		= &one_hundred,
 	},
 #endif
 #ifdef CONFIG_SMP
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "stat_interval",
 		.data		= &sysctl_stat_interval,
 		.maxlen		= sizeof(sysctl_stat_interval),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= proc_dointvec_jiffies,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "mmap_min_addr",
 		.data		= &dac_mmap_min_addr,
 		.maxlen		= sizeof(unsigned long),
 		.mode		= 0644,
-		.proc_handler	= &mmap_min_addr_handler,
+		.proc_handler	= mmap_min_addr_handler,
 	},
 #ifdef CONFIG_NUMA
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "numa_zonelist_order",
 		.data		= &numa_zonelist_order,
 		.maxlen		= NUMA_ZONELIST_ORDER_LEN,
 		.mode		= 0644,
-		.proc_handler	= &numa_zonelist_order_handler,
-		.strategy	= &sysctl_string,
+		.proc_handler	= numa_zonelist_order_handler,
 	},
 #endif
 #if (defined(CONFIG_X86_32) && !defined(CONFIG_UML))|| \
    (defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
 	{
-		.ctl_name	= VM_VDSO_ENABLED,
 		.procname	= "vdso_enabled",
 		.data		= &vdso_enabled,
 		.maxlen		= sizeof(vdso_enabled),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 		.extra1		= &zero,
 	},
 #endif
 #ifdef CONFIG_HIGHMEM
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "highmem_is_dirtyable",
 		.data		= &vm_highmem_is_dirtyable,
 		.maxlen		= sizeof(vm_highmem_is_dirtyable),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
 #endif
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "scan_unevictable_pages",
 		.data		= &scan_unevictable_pages,
 		.maxlen		= sizeof(scan_unevictable_pages),
 		.mode		= 0644,
-		.proc_handler	= &scan_unevictable_handler,
+		.proc_handler	= scan_unevictable_handler,
 	},
 #ifdef CONFIG_MEMORY_FAILURE
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "memory_failure_early_kill",
 		.data		= &sysctl_memory_failure_early_kill,
 		.maxlen		= sizeof(sysctl_memory_failure_early_kill),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "memory_failure_recovery",
 		.data		= &sysctl_memory_failure_recovery,
 		.maxlen		= sizeof(sysctl_memory_failure_recovery),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
@@ -1427,116 +1264,104 @@
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
  */
-	{ .ctl_name = 0 }
+	{ }
 };
 
 #if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
 static struct ctl_table binfmt_misc_table[] = {
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
 static struct ctl_table fs_table[] = {
 	{
-		.ctl_name	= FS_NRINODE,
 		.procname	= "inode-nr",
 		.data		= &inodes_stat,
 		.maxlen		= 2*sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_STATINODE,
 		.procname	= "inode-state",
 		.data		= &inodes_stat,
 		.maxlen		= 7*sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
 		.procname	= "file-nr",
 		.data		= &files_stat,
 		.maxlen		= 3*sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_nr_files,
+		.proc_handler	= proc_nr_files,
 	},
 	{
-		.ctl_name	= FS_MAXFILE,
 		.procname	= "file-max",
 		.data		= &files_stat.max_files,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nr_open",
 		.data		= &sysctl_nr_open,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &sysctl_nr_open_min,
 		.extra2		= &sysctl_nr_open_max,
 	},
 	{
-		.ctl_name	= FS_DENTRY,
 		.procname	= "dentry-state",
 		.data		= &dentry_stat,
 		.maxlen		= 6*sizeof(int),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= FS_OVERFLOWUID,
 		.procname	= "overflowuid",
 		.data		= &fs_overflowuid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &minolduid,
 		.extra2		= &maxolduid,
 	},
 	{
-		.ctl_name	= FS_OVERFLOWGID,
 		.procname	= "overflowgid",
 		.data		= &fs_overflowgid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &minolduid,
 		.extra2		= &maxolduid,
 	},
 #ifdef CONFIG_FILE_LOCKING
 	{
-		.ctl_name	= FS_LEASES,
 		.procname	= "leases-enable",
 		.data		= &leases_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_DNOTIFY
 	{
-		.ctl_name	= FS_DIR_NOTIFY,
 		.procname	= "dir-notify-enable",
 		.data		= &dir_notify_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_MMU
 #ifdef CONFIG_FILE_LOCKING
 	{
-		.ctl_name	= FS_LEASE_TIME,
 		.procname	= "lease-break-time",
 		.data		= &lease_break_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
 #endif
 #ifdef CONFIG_AIO
@@ -1545,19 +1370,18 @@
 		.data		= &aio_nr,
 		.maxlen		= sizeof(aio_nr),
 		.mode		= 0444,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 	{
 		.procname	= "aio-max-nr",
 		.data		= &aio_max_nr,
 		.maxlen		= sizeof(aio_max_nr),
 		.mode		= 0644,
-		.proc_handler	= &proc_doulongvec_minmax,
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 #endif /* CONFIG_AIO */
 #ifdef CONFIG_INOTIFY_USER
 	{
-		.ctl_name	= FS_INOTIFY,
 		.procname	= "inotify",
 		.mode		= 0555,
 		.child		= inotify_table,
@@ -1572,19 +1396,16 @@
 #endif
 #endif
 	{
-		.ctl_name	= KERN_SETUID_DUMPABLE,
 		.procname	= "suid_dumpable",
 		.data		= &suid_dumpable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &two,
 	},
 #if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "binfmt_misc",
 		.mode		= 0555,
 		.child		= binfmt_misc_table,
@@ -1594,13 +1415,12 @@
  * NOTE: do not add new entries to this table unless you have read
  * Documentation/sysctl/ctl_unnumbered.txt
  */
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table debug_table[] = {
 #if defined(CONFIG_X86) || defined(CONFIG_PPC)
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "exception-trace",
 		.data		= &show_unhandled_signals,
 		.maxlen		= sizeof(int),
@@ -1608,11 +1428,11 @@
 		.proc_handler	= proc_dointvec
 	},
 #endif
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table dev_table[] = {
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static DEFINE_SPINLOCK(sysctl_lock);
@@ -1766,122 +1586,6 @@
 	spin_unlock(&sysctl_lock);
 }
 
-#ifdef CONFIG_SYSCTL_SYSCALL
-/* Perform the actual read/write of a sysctl table entry. */
-static int do_sysctl_strategy(struct ctl_table_root *root,
-			struct ctl_table *table,
-			void __user *oldval, size_t __user *oldlenp,
-			void __user *newval, size_t newlen)
-{
-	int op = 0, rc;
-
-	if (oldval)
-		op |= MAY_READ;
-	if (newval)
-		op |= MAY_WRITE;
-	if (sysctl_perm(root, table, op))
-		return -EPERM;
-
-	if (table->strategy) {
-		rc = table->strategy(table, oldval, oldlenp, newval, newlen);
-		if (rc < 0)
-			return rc;
-		if (rc > 0)
-			return 0;
-	}
-
-	/* If there is no strategy routine, or if the strategy returns
-	 * zero, proceed with automatic r/w */
-	if (table->data && table->maxlen) {
-		rc = sysctl_data(table, oldval, oldlenp, newval, newlen);
-		if (rc < 0)
-			return rc;
-	}
-	return 0;
-}
-
-static int parse_table(int __user *name, int nlen,
-		       void __user *oldval, size_t __user *oldlenp,
-		       void __user *newval, size_t newlen,
-		       struct ctl_table_root *root,
-		       struct ctl_table *table)
-{
-	int n;
-repeat:
-	if (!nlen)
-		return -ENOTDIR;
-	if (get_user(n, name))
-		return -EFAULT;
-	for ( ; table->ctl_name || table->procname; table++) {
-		if (!table->ctl_name)
-			continue;
-		if (n == table->ctl_name) {
-			int error;
-			if (table->child) {
-				if (sysctl_perm(root, table, MAY_EXEC))
-					return -EPERM;
-				name++;
-				nlen--;
-				table = table->child;
-				goto repeat;
-			}
-			error = do_sysctl_strategy(root, table,
-						   oldval, oldlenp,
-						   newval, newlen);
-			return error;
-		}
-	}
-	return -ENOTDIR;
-}
-
-int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp,
-	       void __user *newval, size_t newlen)
-{
-	struct ctl_table_header *head;
-	int error = -ENOTDIR;
-
-	if (nlen <= 0 || nlen >= CTL_MAXNAME)
-		return -ENOTDIR;
-	if (oldval) {
-		int old_len;
-		if (!oldlenp || get_user(old_len, oldlenp))
-			return -EFAULT;
-	}
-
-	for (head = sysctl_head_next(NULL); head;
-			head = sysctl_head_next(head)) {
-		error = parse_table(name, nlen, oldval, oldlenp, 
-					newval, newlen,
-					head->root, head->ctl_table);
-		if (error != -ENOTDIR) {
-			sysctl_head_finish(head);
-			break;
-		}
-	}
-	return error;
-}
-
-SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
-{
-	struct __sysctl_args tmp;
-	int error;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	error = deprecated_sysctl_warning(&tmp);
-	if (error)
-		goto out;
-
-	lock_kernel();
-	error = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, tmp.oldlenp,
-			  tmp.newval, tmp.newlen);
-	unlock_kernel();
-out:
-	return error;
-}
-#endif /* CONFIG_SYSCTL_SYSCALL */
-
 /*
  * sysctl_perm does NOT grant the superuser all rights automatically, because
  * some sysctl variables are readonly even to root.
@@ -1917,7 +1621,7 @@
 
 static void sysctl_set_parent(struct ctl_table *parent, struct ctl_table *table)
 {
-	for (; table->ctl_name || table->procname; table++) {
+	for (; table->procname; table++) {
 		table->parent = parent;
 		if (table->child)
 			sysctl_set_parent(table, table->child);
@@ -1949,11 +1653,11 @@
 		return NULL;
 
 	/* ... and nothing else */
-	if (branch[1].procname || branch[1].ctl_name)
+	if (branch[1].procname)
 		return NULL;
 
 	/* table should contain subdirectory with the same name */
-	for (p = table; p->procname || p->ctl_name; p++) {
+	for (p = table; p->procname; p++) {
 		if (!p->child)
 			continue;
 		if (p->procname && strcmp(p->procname, s) == 0)
@@ -1998,9 +1702,6 @@
  *
  * The members of the &struct ctl_table structure are used as follows:
  *
- * ctl_name - This is the numeric sysctl value used by sysctl(2). The number
- *            must be unique within that level of sysctl
- *
  * procname - the name of the sysctl file under /proc/sys. Set to %NULL to not
  *            enter a sysctl file
  *
@@ -2015,8 +1716,6 @@
  *
  * proc_handler - the text handler routine (described below)
  *
- * strategy - the strategy routine (described below)
- *
  * de - for internal use by the sysctl routines
  *
  * extra1, extra2 - extra pointers usable by the proc handler routines
@@ -2029,19 +1728,6 @@
  * struct enable minimal validation of the values being written to be
  * performed, and the mode field allows minimal authentication.
  *
- * More sophisticated management can be enabled by the provision of a
- * strategy routine with the table entry.  This will be called before
- * any automatic read or write of the data is performed.
- *
- * The strategy routine may return
- *
- * < 0 - Error occurred (error is passed to user process)
- *
- * 0   - OK - proceed with automatic read or write.
- *
- * > 0 - OK - read or write has been done by the strategy routine, so
- *       return immediately.
- *
  * There must be a proc_handler routine for any terminal nodes
  * mirrored under /proc/sys (non-terminals are handled by a built-in
  * directory handler).  Several default handlers are available to
@@ -2068,13 +1754,13 @@
 	struct ctl_table_set *set;
 
 	/* Count the path components */
-	for (npath = 0; path[npath].ctl_name || path[npath].procname; ++npath)
+	for (npath = 0; path[npath].procname; ++npath)
 		;
 
 	/*
 	 * For each path component, allocate a 2-element ctl_table array.
 	 * The first array element will be filled with the sysctl entry
-	 * for this, the second will be the sentinel (ctl_name == 0).
+	 * for this, the second will be the sentinel (procname == 0).
 	 *
 	 * We allocate everything in one go so that we don't have to
 	 * worry about freeing additional memory in unregister_sysctl_table.
@@ -2091,7 +1777,6 @@
 	for (n = 0; n < npath; ++n, ++path) {
 		/* Copy the procname */
 		new->procname = path->procname;
-		new->ctl_name = path->ctl_name;
 		new->mode     = 0555;
 
 		*prevp = new;
@@ -2953,286 +2638,6 @@
 
 #endif /* CONFIG_PROC_FS */
 
-
-#ifdef CONFIG_SYSCTL_SYSCALL
-/*
- * General sysctl support routines 
- */
-
-/* The generic sysctl data routine (used if no strategy routine supplied) */
-int sysctl_data(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	size_t len;
-
-	/* Get out of I don't have a variable */
-	if (!table->data || !table->maxlen)
-		return -ENOTDIR;
-
-	if (oldval && oldlenp) {
-		if (get_user(len, oldlenp))
-			return -EFAULT;
-		if (len) {
-			if (len > table->maxlen)
-				len = table->maxlen;
-			if (copy_to_user(oldval, table->data, len))
-				return -EFAULT;
-			if (put_user(len, oldlenp))
-				return -EFAULT;
-		}
-	}
-
-	if (newval && newlen) {
-		if (newlen > table->maxlen)
-			newlen = table->maxlen;
-
-		if (copy_from_user(table->data, newval, newlen))
-			return -EFAULT;
-	}
-	return 1;
-}
-
-/* The generic string strategy routine: */
-int sysctl_string(struct ctl_table *table,
-		  void __user *oldval, size_t __user *oldlenp,
-		  void __user *newval, size_t newlen)
-{
-	if (!table->data || !table->maxlen) 
-		return -ENOTDIR;
-	
-	if (oldval && oldlenp) {
-		size_t bufsize;
-		if (get_user(bufsize, oldlenp))
-			return -EFAULT;
-		if (bufsize) {
-			size_t len = strlen(table->data), copied;
-
-			/* This shouldn't trigger for a well-formed sysctl */
-			if (len > table->maxlen)
-				len = table->maxlen;
-
-			/* Copy up to a max of bufsize-1 bytes of the string */
-			copied = (len >= bufsize) ? bufsize - 1 : len;
-
-			if (copy_to_user(oldval, table->data, copied) ||
-			    put_user(0, (char __user *)(oldval + copied)))
-				return -EFAULT;
-			if (put_user(len, oldlenp))
-				return -EFAULT;
-		}
-	}
-	if (newval && newlen) {
-		size_t len = newlen;
-		if (len > table->maxlen)
-			len = table->maxlen;
-		if(copy_from_user(table->data, newval, len))
-			return -EFAULT;
-		if (len == table->maxlen)
-			len--;
-		((char *) table->data)[len] = 0;
-	}
-	return 1;
-}
-
-/*
- * This function makes sure that all of the integers in the vector
- * are between the minimum and maximum values given in the arrays
- * table->extra1 and table->extra2, respectively.
- */
-int sysctl_intvec(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-
-	if (newval && newlen) {
-		int __user *vec = (int __user *) newval;
-		int *min = (int *) table->extra1;
-		int *max = (int *) table->extra2;
-		size_t length;
-		int i;
-
-		if (newlen % sizeof(int) != 0)
-			return -EINVAL;
-
-		if (!table->extra1 && !table->extra2)
-			return 0;
-
-		if (newlen > table->maxlen)
-			newlen = table->maxlen;
-		length = newlen / sizeof(int);
-
-		for (i = 0; i < length; i++) {
-			int value;
-			if (get_user(value, vec + i))
-				return -EFAULT;
-			if (min && value < min[i])
-				return -EINVAL;
-			if (max && value > max[i])
-				return -EINVAL;
-		}
-	}
-	return 0;
-}
-
-/* Strategy function to convert jiffies to seconds */ 
-int sysctl_jiffies(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t olen;
-
-		if (get_user(olen, oldlenp))
-			return -EFAULT;
-		if (olen) {
-			int val;
-
-			if (olen < sizeof(int))
-				return -EINVAL;
-
-			val = *(int *)(table->data) / HZ;
-			if (put_user(val, (int __user *)oldval))
-				return -EFAULT;
-			if (put_user(sizeof(int), oldlenp))
-				return -EFAULT;
-		}
-	}
-	if (newval && newlen) { 
-		int new;
-		if (newlen != sizeof(int))
-			return -EINVAL; 
-		if (get_user(new, (int __user *)newval))
-			return -EFAULT;
-		*(int *)(table->data) = new*HZ; 
-	}
-	return 1;
-}
-
-/* Strategy function to convert jiffies to seconds */ 
-int sysctl_ms_jiffies(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	if (oldval && oldlenp) {
-		size_t olen;
-
-		if (get_user(olen, oldlenp))
-			return -EFAULT;
-		if (olen) {
-			int val;
-
-			if (olen < sizeof(int))
-				return -EINVAL;
-
-			val = jiffies_to_msecs(*(int *)(table->data));
-			if (put_user(val, (int __user *)oldval))
-				return -EFAULT;
-			if (put_user(sizeof(int), oldlenp))
-				return -EFAULT;
-		}
-	}
-	if (newval && newlen) { 
-		int new;
-		if (newlen != sizeof(int))
-			return -EINVAL; 
-		if (get_user(new, (int __user *)newval))
-			return -EFAULT;
-		*(int *)(table->data) = msecs_to_jiffies(new);
-	}
-	return 1;
-}
-
-
-
-#else /* CONFIG_SYSCTL_SYSCALL */
-
-
-SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
-{
-	struct __sysctl_args tmp;
-	int error;
-
-	if (copy_from_user(&tmp, args, sizeof(tmp)))
-		return -EFAULT;
-
-	error = deprecated_sysctl_warning(&tmp);
-
-	/* If no error reading the parameters then just -ENOSYS ... */
-	if (!error)
-		error = -ENOSYS;
-
-	return error;
-}
-
-int sysctl_data(struct ctl_table *table,
-		  void __user *oldval, size_t __user *oldlenp,
-		  void __user *newval, size_t newlen)
-{
-	return -ENOSYS;
-}
-
-int sysctl_string(struct ctl_table *table,
-		  void __user *oldval, size_t __user *oldlenp,
-		  void __user *newval, size_t newlen)
-{
-	return -ENOSYS;
-}
-
-int sysctl_intvec(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	return -ENOSYS;
-}
-
-int sysctl_jiffies(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	return -ENOSYS;
-}
-
-int sysctl_ms_jiffies(struct ctl_table *table,
-		void __user *oldval, size_t __user *oldlenp,
-		void __user *newval, size_t newlen)
-{
-	return -ENOSYS;
-}
-
-#endif /* CONFIG_SYSCTL_SYSCALL */
-
-static int deprecated_sysctl_warning(struct __sysctl_args *args)
-{
-	static int msg_count;
-	int name[CTL_MAXNAME];
-	int i;
-
-	/* Check args->nlen. */
-	if (args->nlen < 0 || args->nlen > CTL_MAXNAME)
-		return -ENOTDIR;
-
-	/* Read in the sysctl name for better debug message logging */
-	for (i = 0; i < args->nlen; i++)
-		if (get_user(name[i], args->name + i))
-			return -EFAULT;
-
-	/* Ignore accesses to kernel.version */
-	if ((args->nlen == 2) && (name[0] == CTL_KERN) && (name[1] == KERN_VERSION))
-		return 0;
-
-	if (msg_count < 5) {
-		msg_count++;
-		printk(KERN_INFO
-			"warning: process `%s' used the deprecated sysctl "
-			"system call with ", current->comm);
-		for (i = 0; i < args->nlen; i++)
-			printk("%d.", name[i]);
-		printk("\n");
-	}
-	return 0;
-}
-
 /*
  * No sense putting this after each symbol definition, twice,
  * exception granted :-)
@@ -3247,9 +2652,4 @@
 EXPORT_SYMBOL(proc_doulongvec_ms_jiffies_minmax);
 EXPORT_SYMBOL(register_sysctl_table);
 EXPORT_SYMBOL(register_sysctl_paths);
-EXPORT_SYMBOL(sysctl_intvec);
-EXPORT_SYMBOL(sysctl_jiffies);
-EXPORT_SYMBOL(sysctl_ms_jiffies);
-EXPORT_SYMBOL(sysctl_string);
-EXPORT_SYMBOL(sysctl_data);
 EXPORT_SYMBOL(unregister_sysctl_table);
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
new file mode 100644
index 0000000..b75dbf4
--- /dev/null
+++ b/kernel/sysctl_binary.c
@@ -0,0 +1,1507 @@
+#include <linux/stat.h>
+#include <linux/sysctl.h>
+#include "../fs/xfs/linux-2.6/xfs_sysctl.h"
+#include <linux/sunrpc/debug.h>
+#include <linux/string.h>
+#include <net/ip_vs.h>
+#include <linux/syscalls.h>
+#include <linux/namei.h>
+#include <linux/mount.h>
+#include <linux/fs.h>
+#include <linux/nsproxy.h>
+#include <linux/pid_namespace.h>
+#include <linux/file.h>
+#include <linux/ctype.h>
+#include <linux/netdevice.h>
+
+#ifdef CONFIG_SYSCTL_SYSCALL
+
+struct bin_table;
+typedef ssize_t bin_convert_t(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen);
+
+static bin_convert_t bin_dir;
+static bin_convert_t bin_string;
+static bin_convert_t bin_intvec;
+static bin_convert_t bin_ulongvec;
+static bin_convert_t bin_uuid;
+static bin_convert_t bin_dn_node_address;
+
+#define CTL_DIR   bin_dir
+#define CTL_STR   bin_string
+#define CTL_INT   bin_intvec
+#define CTL_ULONG bin_ulongvec
+#define CTL_UUID  bin_uuid
+#define CTL_DNADR bin_dn_node_address
+
+#define BUFSZ 256
+
+struct bin_table {
+	bin_convert_t		*convert;
+	int			ctl_name;
+	const char		*procname;
+	const struct bin_table	*child;
+};
+
+static const struct bin_table bin_random_table[] = {
+	{ CTL_INT,	RANDOM_POOLSIZE,	"poolsize" },
+	{ CTL_INT,	RANDOM_ENTROPY_COUNT,	"entropy_avail" },
+	{ CTL_INT,	RANDOM_READ_THRESH,	"read_wakeup_threshold" },
+	{ CTL_INT,	RANDOM_WRITE_THRESH,	"write_wakeup_threshold" },
+	{ CTL_UUID,	RANDOM_BOOT_ID,		"boot_id" },
+	{ CTL_UUID,	RANDOM_UUID,		"uuid" },
+	{}
+};
+
+static const struct bin_table bin_pty_table[] = {
+	{ CTL_INT,	PTY_MAX,	"max" },
+	{ CTL_INT,	PTY_NR,		"nr" },
+	{}
+};
+
+static const struct bin_table bin_kern_table[] = {
+	{ CTL_STR,	KERN_OSTYPE,			"ostype" },
+	{ CTL_STR,	KERN_OSRELEASE,			"osrelease" },
+	/* KERN_OSREV not used */
+	{ CTL_STR,	KERN_VERSION,			"version" },
+	/* KERN_SECUREMASK not used */
+	/* KERN_PROF not used */
+	{ CTL_STR,	KERN_NODENAME,			"hostname" },
+	{ CTL_STR,	KERN_DOMAINNAME,		"domainname" },
+
+	{ CTL_INT,	KERN_PANIC,			"panic" },
+	{ CTL_INT,	KERN_REALROOTDEV,		"real-root-dev" },
+
+	{ CTL_STR,	KERN_SPARC_REBOOT,		"reboot-cmd" },
+	{ CTL_INT,	KERN_CTLALTDEL,			"ctrl-alt-del" },
+	{ CTL_INT,	KERN_PRINTK,			"printk" },
+
+	/* KERN_NAMETRANS not used */
+	/* KERN_PPC_HTABRECLAIM not used */
+	/* KERN_PPC_ZEROPAGED not used */
+	{ CTL_INT,	KERN_PPC_POWERSAVE_NAP,		"powersave-nap" },
+
+	{ CTL_STR,	KERN_MODPROBE,			"modprobe" },
+	{ CTL_INT,	KERN_SG_BIG_BUFF,		"sg-big-buff" },
+	{ CTL_INT,	KERN_ACCT,			"acct" },
+	/* KERN_PPC_L2CR "l2cr" no longer used */
+
+	/* KERN_RTSIGNR not used */
+	/* KERN_RTSIGMAX not used */
+
+	{ CTL_ULONG,	KERN_SHMMAX,			"shmmax" },
+	{ CTL_INT,	KERN_MSGMAX,			"msgmax" },
+	{ CTL_INT,	KERN_MSGMNB,			"msgmnb" },
+	/* KERN_MSGPOOL not used*/
+	{ CTL_INT,	KERN_SYSRQ,			"sysrq" },
+	{ CTL_INT,	KERN_MAX_THREADS,		"threads-max" },
+	{ CTL_DIR,	KERN_RANDOM,			"random",	bin_random_table },
+	{ CTL_ULONG,	KERN_SHMALL,			"shmall" },
+	{ CTL_INT,	KERN_MSGMNI,			"msgmni" },
+	{ CTL_INT,	KERN_SEM,			"sem" },
+	{ CTL_INT,	KERN_SPARC_STOP_A,		"stop-a" },
+	{ CTL_INT,	KERN_SHMMNI,			"shmmni" },
+
+	{ CTL_INT,	KERN_OVERFLOWUID,		"overflowuid" },
+	{ CTL_INT,	KERN_OVERFLOWGID,		"overflowgid" },
+
+	{ CTL_STR,	KERN_HOTPLUG,			"hotplug", },
+	{ CTL_INT,	KERN_IEEE_EMULATION_WARNINGS,	"ieee_emulation_warnings" },
+
+	{ CTL_INT,	KERN_S390_USER_DEBUG_LOGGING,	"userprocess_debug" },
+	{ CTL_INT,	KERN_CORE_USES_PID,		"core_uses_pid" },
+	/* KERN_TAINTED "tainted" no longer used */
+	{ CTL_INT,	KERN_CADPID,			"cad_pid" },
+	{ CTL_INT,	KERN_PIDMAX,			"pid_max" },
+	{ CTL_STR,	KERN_CORE_PATTERN,		"core_pattern" },
+	{ CTL_INT,	KERN_PANIC_ON_OOPS,		"panic_on_oops" },
+	{ CTL_INT,	KERN_HPPA_PWRSW,		"soft-power" },
+	{ CTL_INT,	KERN_HPPA_UNALIGNED,		"unaligned-trap" },
+
+	{ CTL_INT,	KERN_PRINTK_RATELIMIT,		"printk_ratelimit" },
+	{ CTL_INT,	KERN_PRINTK_RATELIMIT_BURST,	"printk_ratelimit_burst" },
+
+	{ CTL_DIR,	KERN_PTY,			"pty",		bin_pty_table },
+	{ CTL_INT,	KERN_NGROUPS_MAX,		"ngroups_max" },
+	{ CTL_INT,	KERN_SPARC_SCONS_PWROFF,	"scons-poweroff" },
+	/* KERN_HZ_TIMER "hz_timer" no longer used */
+	{ CTL_INT,	KERN_UNKNOWN_NMI_PANIC,		"unknown_nmi_panic" },
+	{ CTL_INT,	KERN_BOOTLOADER_TYPE,		"bootloader_type" },
+	{ CTL_INT,	KERN_RANDOMIZE,			"randomize_va_space" },
+
+	{ CTL_INT,	KERN_SPIN_RETRY,		"spin_retry" },
+	/* KERN_ACPI_VIDEO_FLAGS "acpi_video_flags" no longer used */
+	{ CTL_INT,	KERN_IA64_UNALIGNED,		"ignore-unaligned-usertrap" },
+	{ CTL_INT,	KERN_COMPAT_LOG,		"compat-log" },
+	{ CTL_INT,	KERN_MAX_LOCK_DEPTH,		"max_lock_depth" },
+	{ CTL_INT,	KERN_NMI_WATCHDOG,		"nmi_watchdog" },
+	{ CTL_INT,	KERN_PANIC_ON_NMI,		"panic_on_unrecovered_nmi" },
+	{}
+};
+
+static const struct bin_table bin_vm_table[] = {
+	{ CTL_INT,	VM_OVERCOMMIT_MEMORY,		"overcommit_memory" },
+	{ CTL_INT,	VM_PAGE_CLUSTER,		"page-cluster" },
+	{ CTL_INT,	VM_DIRTY_BACKGROUND,		"dirty_background_ratio" },
+	{ CTL_INT,	VM_DIRTY_RATIO,			"dirty_ratio" },
+	/* VM_DIRTY_WB_CS "dirty_writeback_centisecs" no longer used */
+	/* VM_DIRTY_EXPIRE_CS "dirty_expire_centisecs" no longer used */
+	{ CTL_INT,	VM_NR_PDFLUSH_THREADS,		"nr_pdflush_threads" },
+	{ CTL_INT,	VM_OVERCOMMIT_RATIO,		"overcommit_ratio" },
+	/* VM_PAGEBUF unused */
+	/* VM_HUGETLB_PAGES "nr_hugepages" no longer used */
+	{ CTL_INT,	VM_SWAPPINESS,			"swappiness" },
+	{ CTL_INT,	VM_LOWMEM_RESERVE_RATIO,	"lowmem_reserve_ratio" },
+	{ CTL_INT,	VM_MIN_FREE_KBYTES,		"min_free_kbytes" },
+	{ CTL_INT,	VM_MAX_MAP_COUNT,		"max_map_count" },
+	{ CTL_INT,	VM_LAPTOP_MODE,			"laptop_mode" },
+	{ CTL_INT,	VM_BLOCK_DUMP,			"block_dump" },
+	{ CTL_INT,	VM_HUGETLB_GROUP,		"hugetlb_shm_group" },
+	{ CTL_INT,	VM_VFS_CACHE_PRESSURE,	"vfs_cache_pressure" },
+	{ CTL_INT,	VM_LEGACY_VA_LAYOUT,		"legacy_va_layout" },
+	/* VM_SWAP_TOKEN_TIMEOUT unused */
+	{ CTL_INT,	VM_DROP_PAGECACHE,		"drop_caches" },
+	{ CTL_INT,	VM_PERCPU_PAGELIST_FRACTION,	"percpu_pagelist_fraction" },
+	{ CTL_INT,	VM_ZONE_RECLAIM_MODE,		"zone_reclaim_mode" },
+	{ CTL_INT,	VM_MIN_UNMAPPED,		"min_unmapped_ratio" },
+	{ CTL_INT,	VM_PANIC_ON_OOM,		"panic_on_oom" },
+	{ CTL_INT,	VM_VDSO_ENABLED,		"vdso_enabled" },
+	{ CTL_INT,	VM_MIN_SLAB,			"min_slab_ratio" },
+
+	{}
+};
+
+static const struct bin_table bin_net_core_table[] = {
+	{ CTL_INT,	NET_CORE_WMEM_MAX,	"wmem_max" },
+	{ CTL_INT,	NET_CORE_RMEM_MAX,	"rmem_max" },
+	{ CTL_INT,	NET_CORE_WMEM_DEFAULT,	"wmem_default" },
+	{ CTL_INT,	NET_CORE_RMEM_DEFAULT,	"rmem_default" },
+	/* NET_CORE_DESTROY_DELAY unused */
+	{ CTL_INT,	NET_CORE_MAX_BACKLOG,	"netdev_max_backlog" },
+	/* NET_CORE_FASTROUTE unused */
+	{ CTL_INT,	NET_CORE_MSG_COST,	"message_cost" },
+	{ CTL_INT,	NET_CORE_MSG_BURST,	"message_burst" },
+	{ CTL_INT,	NET_CORE_OPTMEM_MAX,	"optmem_max" },
+	/* NET_CORE_HOT_LIST_LENGTH unused */
+	/* NET_CORE_DIVERT_VERSION unused */
+	/* NET_CORE_NO_CONG_THRESH unused */
+	/* NET_CORE_NO_CONG unused */
+	/* NET_CORE_LO_CONG unused */
+	/* NET_CORE_MOD_CONG unused */
+	{ CTL_INT,	NET_CORE_DEV_WEIGHT,	"dev_weight" },
+	{ CTL_INT,	NET_CORE_SOMAXCONN,	"somaxconn" },
+	{ CTL_INT,	NET_CORE_BUDGET,	"netdev_budget" },
+	{ CTL_INT,	NET_CORE_AEVENT_ETIME,	"xfrm_aevent_etime" },
+	{ CTL_INT,	NET_CORE_AEVENT_RSEQTH,	"xfrm_aevent_rseqth" },
+	{ CTL_INT,	NET_CORE_WARNINGS,	"warnings" },
+	{},
+};
+
+static const struct bin_table bin_net_unix_table[] = {
+	/* NET_UNIX_DESTROY_DELAY unused */
+	/* NET_UNIX_DELETE_DELAY unused */
+	{ CTL_INT,	NET_UNIX_MAX_DGRAM_QLEN,	"max_dgram_qlen" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv4_route_table[] = {
+	{ CTL_INT,	NET_IPV4_ROUTE_FLUSH,			"flush" },
+	/* NET_IPV4_ROUTE_MIN_DELAY "min_delay" no longer used */
+	/* NET_IPV4_ROUTE_MAX_DELAY "max_delay" no longer used */
+	{ CTL_INT,	NET_IPV4_ROUTE_GC_THRESH,		"gc_thresh" },
+	{ CTL_INT,	NET_IPV4_ROUTE_MAX_SIZE,		"max_size" },
+	{ CTL_INT,	NET_IPV4_ROUTE_GC_MIN_INTERVAL,		"gc_min_interval" },
+	{ CTL_INT,	NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS,	"gc_min_interval_ms" },
+	{ CTL_INT,	NET_IPV4_ROUTE_GC_TIMEOUT,		"gc_timeout" },
+	{ CTL_INT,	NET_IPV4_ROUTE_GC_INTERVAL,		"gc_interval" },
+	{ CTL_INT,	NET_IPV4_ROUTE_REDIRECT_LOAD,		"redirect_load" },
+	{ CTL_INT,	NET_IPV4_ROUTE_REDIRECT_NUMBER,		"redirect_number" },
+	{ CTL_INT,	NET_IPV4_ROUTE_REDIRECT_SILENCE,	"redirect_silence" },
+	{ CTL_INT,	NET_IPV4_ROUTE_ERROR_COST,		"error_cost" },
+	{ CTL_INT,	NET_IPV4_ROUTE_ERROR_BURST,		"error_burst" },
+	{ CTL_INT,	NET_IPV4_ROUTE_GC_ELASTICITY,		"gc_elasticity" },
+	{ CTL_INT,	NET_IPV4_ROUTE_MTU_EXPIRES,		"mtu_expires" },
+	{ CTL_INT,	NET_IPV4_ROUTE_MIN_PMTU,		"min_pmtu" },
+	{ CTL_INT,	NET_IPV4_ROUTE_MIN_ADVMSS,		"min_adv_mss" },
+	{ CTL_INT,	NET_IPV4_ROUTE_SECRET_INTERVAL,		"secret_interval" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv4_conf_vars_table[] = {
+	{ CTL_INT,	NET_IPV4_CONF_FORWARDING,		"forwarding" },
+	{ CTL_INT,	NET_IPV4_CONF_MC_FORWARDING,		"mc_forwarding" },
+
+	{ CTL_INT,	NET_IPV4_CONF_ACCEPT_REDIRECTS,		"accept_redirects" },
+	{ CTL_INT,	NET_IPV4_CONF_SECURE_REDIRECTS,		"secure_redirects" },
+	{ CTL_INT,	NET_IPV4_CONF_SEND_REDIRECTS,		"send_redirects" },
+	{ CTL_INT,	NET_IPV4_CONF_SHARED_MEDIA,		"shared_media" },
+	{ CTL_INT,	NET_IPV4_CONF_RP_FILTER,		"rp_filter" },
+	{ CTL_INT,	NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE,	"accept_source_route" },
+	{ CTL_INT,	NET_IPV4_CONF_PROXY_ARP,		"proxy_arp" },
+	{ CTL_INT,	NET_IPV4_CONF_MEDIUM_ID,		"medium_id" },
+	{ CTL_INT,	NET_IPV4_CONF_BOOTP_RELAY,		"bootp_relay" },
+	{ CTL_INT,	NET_IPV4_CONF_LOG_MARTIANS,		"log_martians" },
+	{ CTL_INT,	NET_IPV4_CONF_TAG,			"tag" },
+	{ CTL_INT,	NET_IPV4_CONF_ARPFILTER,		"arp_filter" },
+	{ CTL_INT,	NET_IPV4_CONF_ARP_ANNOUNCE,		"arp_announce" },
+	{ CTL_INT,	NET_IPV4_CONF_ARP_IGNORE,		"arp_ignore" },
+	{ CTL_INT,	NET_IPV4_CONF_ARP_ACCEPT,		"arp_accept" },
+	{ CTL_INT,	NET_IPV4_CONF_ARP_NOTIFY,		"arp_notify" },
+
+	{ CTL_INT,	NET_IPV4_CONF_NOXFRM,			"disable_xfrm" },
+	{ CTL_INT,	NET_IPV4_CONF_NOPOLICY,			"disable_policy" },
+	{ CTL_INT,	NET_IPV4_CONF_FORCE_IGMP_VERSION,	"force_igmp_version" },
+	{ CTL_INT,	NET_IPV4_CONF_PROMOTE_SECONDARIES,	"promote_secondaries" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv4_conf_table[] = {
+	{ CTL_DIR,	NET_PROTO_CONF_ALL,	"all",		bin_net_ipv4_conf_vars_table },
+	{ CTL_DIR,	NET_PROTO_CONF_DEFAULT,	"default",	bin_net_ipv4_conf_vars_table },
+	{ CTL_DIR,	0, NULL, bin_net_ipv4_conf_vars_table },
+	{}
+};
+
+static const struct bin_table bin_net_neigh_vars_table[] = {
+	{ CTL_INT,	NET_NEIGH_MCAST_SOLICIT,	"mcast_solicit" },
+	{ CTL_INT,	NET_NEIGH_UCAST_SOLICIT,	"ucast_solicit" },
+	{ CTL_INT,	NET_NEIGH_APP_SOLICIT,		"app_solicit" },
+	/* NET_NEIGH_RETRANS_TIME "retrans_time" no longer used */
+	{ CTL_INT,	NET_NEIGH_REACHABLE_TIME,	"base_reachable_time" },
+	{ CTL_INT,	NET_NEIGH_DELAY_PROBE_TIME,	"delay_first_probe_time" },
+	{ CTL_INT,	NET_NEIGH_GC_STALE_TIME,	"gc_stale_time" },
+	{ CTL_INT,	NET_NEIGH_UNRES_QLEN,		"unres_qlen" },
+	{ CTL_INT,	NET_NEIGH_PROXY_QLEN,		"proxy_qlen" },
+	/* NET_NEIGH_ANYCAST_DELAY "anycast_delay" no longer used */
+	/* NET_NEIGH_PROXY_DELAY "proxy_delay" no longer used */
+	/* NET_NEIGH_LOCKTIME "locktime" no longer used */
+	{ CTL_INT,	NET_NEIGH_GC_INTERVAL,		"gc_interval" },
+	{ CTL_INT,	NET_NEIGH_GC_THRESH1,		"gc_thresh1" },
+	{ CTL_INT,	NET_NEIGH_GC_THRESH2,		"gc_thresh2" },
+	{ CTL_INT,	NET_NEIGH_GC_THRESH3,		"gc_thresh3" },
+	{ CTL_INT,	NET_NEIGH_RETRANS_TIME_MS,	"retrans_time_ms" },
+	{ CTL_INT,	NET_NEIGH_REACHABLE_TIME_MS,	"base_reachable_time_ms" },
+	{}
+};
+
+static const struct bin_table bin_net_neigh_table[] = {
+	{ CTL_DIR,	NET_PROTO_CONF_DEFAULT, "default", bin_net_neigh_vars_table },
+	{ CTL_DIR,	0, NULL, bin_net_neigh_vars_table },
+	{}
+};
+
+static const struct bin_table bin_net_ipv4_netfilter_table[] = {
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_MAX,		"ip_conntrack_max" },
+
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT "ip_conntrack_tcp_timeout_syn_sent" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV "ip_conntrack_tcp_timeout_syn_recv" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED "ip_conntrack_tcp_timeout_established" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT "ip_conntrack_tcp_timeout_fin_wait" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT	"ip_conntrack_tcp_timeout_close_wait" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK "ip_conntrack_tcp_timeout_last_ack" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT "ip_conntrack_tcp_timeout_time_wait" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE "ip_conntrack_tcp_timeout_close" no longer used */
+
+	/* NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT "ip_conntrack_udp_timeout" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM "ip_conntrack_udp_timeout_stream" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT "ip_conntrack_icmp_timeout" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT "ip_conntrack_generic_timeout" no longer used */
+
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_BUCKETS,		"ip_conntrack_buckets" },
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_LOG_INVALID,	"ip_conntrack_log_invalid" },
+	/* NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS "ip_conntrack_tcp_timeout_max_retrans" no longer used */
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_TCP_LOOSE,	"ip_conntrack_tcp_loose" },
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL,	"ip_conntrack_tcp_be_liberal" },
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS,	"ip_conntrack_tcp_max_retrans" },
+
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED "ip_conntrack_sctp_timeout_closed" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT "ip_conntrack_sctp_timeout_cookie_wait" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED "ip_conntrack_sctp_timeout_cookie_echoed" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED "ip_conntrack_sctp_timeout_established" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT "ip_conntrack_sctp_timeout_shutdown_sent" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD "ip_conntrack_sctp_timeout_shutdown_recd" no longer used */
+	/* NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT "ip_conntrack_sctp_timeout_shutdown_ack_sent" no longer used */
+
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_COUNT,		"ip_conntrack_count" },
+	{ CTL_INT,	NET_IPV4_NF_CONNTRACK_CHECKSUM,		"ip_conntrack_checksum" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv4_table[] = {
+	{CTL_INT,	NET_IPV4_FORWARD,			"ip_forward" },
+
+	{ CTL_DIR,	NET_IPV4_CONF,		"conf",		bin_net_ipv4_conf_table },
+	{ CTL_DIR,	NET_IPV4_NEIGH,		"neigh",	bin_net_neigh_table },
+	{ CTL_DIR,	NET_IPV4_ROUTE,		"route",	bin_net_ipv4_route_table },
+	/* NET_IPV4_FIB_HASH unused */
+	{ CTL_DIR,	NET_IPV4_NETFILTER,	"netfilter",	bin_net_ipv4_netfilter_table },
+
+	{ CTL_INT,	NET_IPV4_TCP_TIMESTAMPS,		"tcp_timestamps" },
+	{ CTL_INT,	NET_IPV4_TCP_WINDOW_SCALING,		"tcp_window_scaling" },
+	{ CTL_INT,	NET_IPV4_TCP_SACK,			"tcp_sack" },
+	{ CTL_INT,	NET_IPV4_TCP_RETRANS_COLLAPSE,		"tcp_retrans_collapse" },
+	{ CTL_INT,	NET_IPV4_DEFAULT_TTL,			"ip_default_ttl" },
+	/* NET_IPV4_AUTOCONFIG unused */
+	{ CTL_INT,	NET_IPV4_NO_PMTU_DISC,			"ip_no_pmtu_disc" },
+	{ CTL_INT,	NET_IPV4_NONLOCAL_BIND,			"ip_nonlocal_bind" },
+	{ CTL_INT,	NET_IPV4_TCP_SYN_RETRIES,		"tcp_syn_retries" },
+	{ CTL_INT,	NET_TCP_SYNACK_RETRIES,			"tcp_synack_retries" },
+	{ CTL_INT,	NET_TCP_MAX_ORPHANS,			"tcp_max_orphans" },
+	{ CTL_INT,	NET_TCP_MAX_TW_BUCKETS,			"tcp_max_tw_buckets" },
+	{ CTL_INT,	NET_IPV4_DYNADDR,			"ip_dynaddr" },
+	{ CTL_INT,	NET_IPV4_TCP_KEEPALIVE_TIME,		"tcp_keepalive_time" },
+	{ CTL_INT,	NET_IPV4_TCP_KEEPALIVE_PROBES,		"tcp_keepalive_probes" },
+	{ CTL_INT,	NET_IPV4_TCP_KEEPALIVE_INTVL,		"tcp_keepalive_intvl" },
+	{ CTL_INT,	NET_IPV4_TCP_RETRIES1,			"tcp_retries1" },
+	{ CTL_INT,	NET_IPV4_TCP_RETRIES2,			"tcp_retries2" },
+	{ CTL_INT,	NET_IPV4_TCP_FIN_TIMEOUT,		"tcp_fin_timeout" },
+	{ CTL_INT,	NET_TCP_SYNCOOKIES,			"tcp_syncookies" },
+	{ CTL_INT,	NET_TCP_TW_RECYCLE,			"tcp_tw_recycle" },
+	{ CTL_INT,	NET_TCP_ABORT_ON_OVERFLOW,		"tcp_abort_on_overflow" },
+	{ CTL_INT,	NET_TCP_STDURG,				"tcp_stdurg" },
+	{ CTL_INT,	NET_TCP_RFC1337,			"tcp_rfc1337" },
+	{ CTL_INT,	NET_TCP_MAX_SYN_BACKLOG,		"tcp_max_syn_backlog" },
+	{ CTL_INT,	NET_IPV4_LOCAL_PORT_RANGE,		"ip_local_port_range" },
+	{ CTL_INT,	NET_IPV4_IGMP_MAX_MEMBERSHIPS,		"igmp_max_memberships" },
+	{ CTL_INT,	NET_IPV4_IGMP_MAX_MSF,			"igmp_max_msf" },
+	{ CTL_INT,	NET_IPV4_INET_PEER_THRESHOLD,		"inet_peer_threshold" },
+	{ CTL_INT,	NET_IPV4_INET_PEER_MINTTL,		"inet_peer_minttl" },
+	{ CTL_INT,	NET_IPV4_INET_PEER_MAXTTL,		"inet_peer_maxttl" },
+	{ CTL_INT,	NET_IPV4_INET_PEER_GC_MINTIME,		"inet_peer_gc_mintime" },
+	{ CTL_INT,	NET_IPV4_INET_PEER_GC_MAXTIME,		"inet_peer_gc_maxtime" },
+	{ CTL_INT,	NET_TCP_ORPHAN_RETRIES,			"tcp_orphan_retries" },
+	{ CTL_INT,	NET_TCP_FACK,				"tcp_fack" },
+	{ CTL_INT,	NET_TCP_REORDERING,			"tcp_reordering" },
+	{ CTL_INT,	NET_TCP_ECN,				"tcp_ecn" },
+	{ CTL_INT,	NET_TCP_DSACK,				"tcp_dsack" },
+	{ CTL_INT,	NET_TCP_MEM,				"tcp_mem" },
+	{ CTL_INT,	NET_TCP_WMEM,				"tcp_wmem" },
+	{ CTL_INT,	NET_TCP_RMEM,				"tcp_rmem" },
+	{ CTL_INT,	NET_TCP_APP_WIN,			"tcp_app_win" },
+	{ CTL_INT,	NET_TCP_ADV_WIN_SCALE,			"tcp_adv_win_scale" },
+	{ CTL_INT,	NET_TCP_TW_REUSE,			"tcp_tw_reuse" },
+	{ CTL_INT,	NET_TCP_FRTO,				"tcp_frto" },
+	{ CTL_INT,	NET_TCP_FRTO_RESPONSE,			"tcp_frto_response" },
+	{ CTL_INT,	NET_TCP_LOW_LATENCY,			"tcp_low_latency" },
+	{ CTL_INT,	NET_TCP_NO_METRICS_SAVE,		"tcp_no_metrics_save" },
+	{ CTL_INT,	NET_TCP_MODERATE_RCVBUF,		"tcp_moderate_rcvbuf" },
+	{ CTL_INT,	NET_TCP_TSO_WIN_DIVISOR,		"tcp_tso_win_divisor" },
+	{ CTL_STR,	NET_TCP_CONG_CONTROL,			"tcp_congestion_control" },
+	{ CTL_INT,	NET_TCP_ABC,				"tcp_abc" },
+	{ CTL_INT,	NET_TCP_MTU_PROBING,			"tcp_mtu_probing" },
+	{ CTL_INT,	NET_TCP_BASE_MSS,			"tcp_base_mss" },
+	{ CTL_INT,	NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS,	"tcp_workaround_signed_windows" },
+	{ CTL_INT,	NET_TCP_DMA_COPYBREAK,			"tcp_dma_copybreak" },
+	{ CTL_INT,	NET_TCP_SLOW_START_AFTER_IDLE,		"tcp_slow_start_after_idle" },
+	{ CTL_INT,	NET_CIPSOV4_CACHE_ENABLE,		"cipso_cache_enable" },
+	{ CTL_INT,	NET_CIPSOV4_CACHE_BUCKET_SIZE,		"cipso_cache_bucket_size" },
+	{ CTL_INT,	NET_CIPSOV4_RBM_OPTFMT,			"cipso_rbm_optfmt" },
+	{ CTL_INT,	NET_CIPSOV4_RBM_STRICTVALID,		"cipso_rbm_strictvalid" },
+	/* NET_TCP_AVAIL_CONG_CONTROL "tcp_available_congestion_control" no longer used */
+	{ CTL_STR,	NET_TCP_ALLOWED_CONG_CONTROL,		"tcp_allowed_congestion_control" },
+	{ CTL_INT,	NET_TCP_MAX_SSTHRESH,			"tcp_max_ssthresh" },
+
+	{ CTL_INT,	NET_IPV4_ICMP_ECHO_IGNORE_ALL,		"icmp_echo_ignore_all" },
+	{ CTL_INT,	NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS,	"icmp_echo_ignore_broadcasts" },
+	{ CTL_INT,	NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES,	"icmp_ignore_bogus_error_responses" },
+	{ CTL_INT,	NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR,	"icmp_errors_use_inbound_ifaddr" },
+	{ CTL_INT,	NET_IPV4_ICMP_RATELIMIT,		"icmp_ratelimit" },
+	{ CTL_INT,	NET_IPV4_ICMP_RATEMASK,			"icmp_ratemask" },
+
+	{ CTL_INT,	NET_IPV4_IPFRAG_HIGH_THRESH,		"ipfrag_high_thresh" },
+	{ CTL_INT,	NET_IPV4_IPFRAG_LOW_THRESH,		"ipfrag_low_thresh" },
+	{ CTL_INT,	NET_IPV4_IPFRAG_TIME,			"ipfrag_time" },
+
+	{ CTL_INT,	NET_IPV4_IPFRAG_SECRET_INTERVAL,	"ipfrag_secret_interval" },
+	/* NET_IPV4_IPFRAG_MAX_DIST "ipfrag_max_dist" no longer used */
+
+	{ CTL_INT,	2088 /* NET_IPQ_QMAX */,		"ip_queue_maxlen" },
+
+	/* NET_TCP_DEFAULT_WIN_SCALE unused */
+	/* NET_TCP_BIC_BETA unused */
+	/* NET_IPV4_TCP_MAX_KA_PROBES unused */
+	/* NET_IPV4_IP_MASQ_DEBUG unused */
+	/* NET_TCP_SYN_TAILDROP unused */
+	/* NET_IPV4_ICMP_SOURCEQUENCH_RATE unused */
+	/* NET_IPV4_ICMP_DESTUNREACH_RATE unused */
+	/* NET_IPV4_ICMP_TIMEEXCEED_RATE unused */
+	/* NET_IPV4_ICMP_PARAMPROB_RATE unused */
+	/* NET_IPV4_ICMP_ECHOREPLY_RATE unused */
+	/* NET_IPV4_ALWAYS_DEFRAG unused */
+	{}
+};
+
+static const struct bin_table bin_net_ipx_table[] = {
+	{ CTL_INT,	NET_IPX_PPROP_BROADCASTING,	"ipx_pprop_broadcasting" },
+	/* NET_IPX_FORWARDING unused */
+	{}
+};
+
+static const struct bin_table bin_net_atalk_table[] = {
+	{ CTL_INT,	NET_ATALK_AARP_EXPIRY_TIME,		"aarp-expiry-time" },
+	{ CTL_INT,	NET_ATALK_AARP_TICK_TIME,		"aarp-tick-time" },
+	{ CTL_INT,	NET_ATALK_AARP_RETRANSMIT_LIMIT,	"aarp-retransmit-limit" },
+	{ CTL_INT,	NET_ATALK_AARP_RESOLVE_TIME,		"aarp-resolve-time" },
+	{},
+};
+
+static const struct bin_table bin_net_netrom_table[] = {
+	{ CTL_INT,	NET_NETROM_DEFAULT_PATH_QUALITY,		"default_path_quality" },
+	{ CTL_INT,	NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER,	"obsolescence_count_initialiser" },
+	{ CTL_INT,	NET_NETROM_NETWORK_TTL_INITIALISER,		"network_ttl_initialiser" },
+	{ CTL_INT,	NET_NETROM_TRANSPORT_TIMEOUT,			"transport_timeout" },
+	{ CTL_INT,	NET_NETROM_TRANSPORT_MAXIMUM_TRIES,		"transport_maximum_tries" },
+	{ CTL_INT,	NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY,		"transport_acknowledge_delay" },
+	{ CTL_INT,	NET_NETROM_TRANSPORT_BUSY_DELAY,		"transport_busy_delay" },
+	{ CTL_INT,	NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE,	"transport_requested_window_size" },
+	{ CTL_INT,	NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT,	"transport_no_activity_timeout" },
+	{ CTL_INT,	NET_NETROM_ROUTING_CONTROL,			"routing_control" },
+	{ CTL_INT,	NET_NETROM_LINK_FAILS_COUNT,			"link_fails_count" },
+	{ CTL_INT,	NET_NETROM_RESET,				"reset" },
+	{}
+};
+
+static const struct bin_table bin_net_ax25_param_table[] = {
+	{ CTL_INT,	NET_AX25_IP_DEFAULT_MODE,	"ip_default_mode" },
+	{ CTL_INT,	NET_AX25_DEFAULT_MODE,		"ax25_default_mode" },
+	{ CTL_INT,	NET_AX25_BACKOFF_TYPE,		"backoff_type" },
+	{ CTL_INT,	NET_AX25_CONNECT_MODE,		"connect_mode" },
+	{ CTL_INT,	NET_AX25_STANDARD_WINDOW,	"standard_window_size" },
+	{ CTL_INT,	NET_AX25_EXTENDED_WINDOW,	"extended_window_size" },
+	{ CTL_INT,	NET_AX25_T1_TIMEOUT,		"t1_timeout" },
+	{ CTL_INT,	NET_AX25_T2_TIMEOUT,		"t2_timeout" },
+	{ CTL_INT,	NET_AX25_T3_TIMEOUT,		"t3_timeout" },
+	{ CTL_INT,	NET_AX25_IDLE_TIMEOUT,		"idle_timeout" },
+	{ CTL_INT,	NET_AX25_N2,			"maximum_retry_count" },
+	{ CTL_INT,	NET_AX25_PACLEN,		"maximum_packet_length" },
+	{ CTL_INT,	NET_AX25_PROTOCOL,		"protocol" },
+	{ CTL_INT,	NET_AX25_DAMA_SLAVE_TIMEOUT,	"dama_slave_timeout" },
+	{}
+};
+
+static const struct bin_table bin_net_ax25_table[] = {
+	{ CTL_DIR,	0, NULL, bin_net_ax25_param_table },
+	{}
+};
+
+static const struct bin_table bin_net_rose_table[] = {
+	{ CTL_INT,	NET_ROSE_RESTART_REQUEST_TIMEOUT,	"restart_request_timeout" },
+	{ CTL_INT,	NET_ROSE_CALL_REQUEST_TIMEOUT,		"call_request_timeout" },
+	{ CTL_INT,	NET_ROSE_RESET_REQUEST_TIMEOUT,		"reset_request_timeout" },
+	{ CTL_INT,	NET_ROSE_CLEAR_REQUEST_TIMEOUT,		"clear_request_timeout" },
+	{ CTL_INT,	NET_ROSE_ACK_HOLD_BACK_TIMEOUT,		"acknowledge_hold_back_timeout" },
+	{ CTL_INT,	NET_ROSE_ROUTING_CONTROL,		"routing_control" },
+	{ CTL_INT,	NET_ROSE_LINK_FAIL_TIMEOUT,		"link_fail_timeout" },
+	{ CTL_INT,	NET_ROSE_MAX_VCS,			"maximum_virtual_circuits" },
+	{ CTL_INT,	NET_ROSE_WINDOW_SIZE,			"window_size" },
+	{ CTL_INT,	NET_ROSE_NO_ACTIVITY_TIMEOUT,		"no_activity_timeout" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv6_conf_var_table[] = {
+	{ CTL_INT,	NET_IPV6_FORWARDING,			"forwarding" },
+	{ CTL_INT,	NET_IPV6_HOP_LIMIT,			"hop_limit" },
+	{ CTL_INT,	NET_IPV6_MTU,				"mtu" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_RA,			"accept_ra" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_REDIRECTS,		"accept_redirects" },
+	{ CTL_INT,	NET_IPV6_AUTOCONF,			"autoconf" },
+	{ CTL_INT,	NET_IPV6_DAD_TRANSMITS,			"dad_transmits" },
+	{ CTL_INT,	NET_IPV6_RTR_SOLICITS,			"router_solicitations" },
+	{ CTL_INT,	NET_IPV6_RTR_SOLICIT_INTERVAL,		"router_solicitation_interval" },
+	{ CTL_INT,	NET_IPV6_RTR_SOLICIT_DELAY,		"router_solicitation_delay" },
+	{ CTL_INT,	NET_IPV6_USE_TEMPADDR,			"use_tempaddr" },
+	{ CTL_INT,	NET_IPV6_TEMP_VALID_LFT,		"temp_valid_lft" },
+	{ CTL_INT,	NET_IPV6_TEMP_PREFERED_LFT,		"temp_prefered_lft" },
+	{ CTL_INT,	NET_IPV6_REGEN_MAX_RETRY,		"regen_max_retry" },
+	{ CTL_INT,	NET_IPV6_MAX_DESYNC_FACTOR,		"max_desync_factor" },
+	{ CTL_INT,	NET_IPV6_MAX_ADDRESSES,			"max_addresses" },
+	{ CTL_INT,	NET_IPV6_FORCE_MLD_VERSION,		"force_mld_version" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_RA_DEFRTR,		"accept_ra_defrtr" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_RA_PINFO,		"accept_ra_pinfo" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_RA_RTR_PREF,		"accept_ra_rtr_pref" },
+	{ CTL_INT,	NET_IPV6_RTR_PROBE_INTERVAL,		"router_probe_interval" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN,	"accept_ra_rt_info_max_plen" },
+	{ CTL_INT,	NET_IPV6_PROXY_NDP,			"proxy_ndp" },
+	{ CTL_INT,	NET_IPV6_ACCEPT_SOURCE_ROUTE,		"accept_source_route" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv6_conf_table[] = {
+	{ CTL_DIR,	NET_PROTO_CONF_ALL,		"all",	bin_net_ipv6_conf_var_table },
+	{ CTL_DIR,	NET_PROTO_CONF_DEFAULT, 	"default", bin_net_ipv6_conf_var_table },
+	{ CTL_DIR,	0, NULL, bin_net_ipv6_conf_var_table },
+	{}
+};
+
+static const struct bin_table bin_net_ipv6_route_table[] = {
+	/* NET_IPV6_ROUTE_FLUSH	"flush"  no longer used */
+	{ CTL_INT,	NET_IPV6_ROUTE_GC_THRESH,		"gc_thresh" },
+	{ CTL_INT,	NET_IPV6_ROUTE_MAX_SIZE,		"max_size" },
+	{ CTL_INT,	NET_IPV6_ROUTE_GC_MIN_INTERVAL,		"gc_min_interval" },
+	{ CTL_INT,	NET_IPV6_ROUTE_GC_TIMEOUT,		"gc_timeout" },
+	{ CTL_INT,	NET_IPV6_ROUTE_GC_INTERVAL,		"gc_interval" },
+	{ CTL_INT,	NET_IPV6_ROUTE_GC_ELASTICITY,		"gc_elasticity" },
+	{ CTL_INT,	NET_IPV6_ROUTE_MTU_EXPIRES,		"mtu_expires" },
+	{ CTL_INT,	NET_IPV6_ROUTE_MIN_ADVMSS,		"min_adv_mss" },
+	{ CTL_INT,	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS,	"gc_min_interval_ms" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv6_icmp_table[] = {
+	{ CTL_INT,	NET_IPV6_ICMP_RATELIMIT,	"ratelimit" },
+	{}
+};
+
+static const struct bin_table bin_net_ipv6_table[] = {
+	{ CTL_DIR,	NET_IPV6_CONF,		"conf",		bin_net_ipv6_conf_table },
+	{ CTL_DIR,	NET_IPV6_NEIGH,		"neigh",	bin_net_neigh_table },
+	{ CTL_DIR,	NET_IPV6_ROUTE,		"route",	bin_net_ipv6_route_table },
+	{ CTL_DIR,	NET_IPV6_ICMP,		"icmp",		bin_net_ipv6_icmp_table },
+	{ CTL_INT,	NET_IPV6_BINDV6ONLY,		"bindv6only" },
+	{ CTL_INT,	NET_IPV6_IP6FRAG_HIGH_THRESH,	"ip6frag_high_thresh" },
+	{ CTL_INT,	NET_IPV6_IP6FRAG_LOW_THRESH,	"ip6frag_low_thresh" },
+	{ CTL_INT,	NET_IPV6_IP6FRAG_TIME,		"ip6frag_time" },
+	{ CTL_INT,	NET_IPV6_IP6FRAG_SECRET_INTERVAL,	"ip6frag_secret_interval" },
+	{ CTL_INT,	NET_IPV6_MLD_MAX_MSF,		"mld_max_msf" },
+	{ CTL_INT,	2088 /* IPQ_QMAX */,		"ip6_queue_maxlen" },
+	{}
+};
+
+static const struct bin_table bin_net_x25_table[] = {
+	{ CTL_INT,	NET_X25_RESTART_REQUEST_TIMEOUT,	"restart_request_timeout" },
+	{ CTL_INT,	NET_X25_CALL_REQUEST_TIMEOUT,		"call_request_timeout" },
+	{ CTL_INT,	NET_X25_RESET_REQUEST_TIMEOUT,	"reset_request_timeout" },
+	{ CTL_INT,	NET_X25_CLEAR_REQUEST_TIMEOUT,	"clear_request_timeout" },
+	{ CTL_INT,	NET_X25_ACK_HOLD_BACK_TIMEOUT,	"acknowledgement_hold_back_timeout" },
+	{ CTL_INT,	NET_X25_FORWARD,			"x25_forward" },
+	{}
+};
+
+static const struct bin_table bin_net_tr_table[] = {
+	{ CTL_INT,	NET_TR_RIF_TIMEOUT,	"rif_timeout" },
+	{}
+};
+
+
+static const struct bin_table bin_net_decnet_conf_vars[] = {
+	{ CTL_INT,	NET_DECNET_CONF_DEV_FORWARDING,	"forwarding" },
+	{ CTL_INT,	NET_DECNET_CONF_DEV_PRIORITY,	"priority" },
+	{ CTL_INT,	NET_DECNET_CONF_DEV_T2,		"t2" },
+	{ CTL_INT,	NET_DECNET_CONF_DEV_T3,		"t3" },
+	{}
+};
+
+static const struct bin_table bin_net_decnet_conf[] = {
+	{ CTL_DIR, NET_DECNET_CONF_ETHER,    "ethernet", bin_net_decnet_conf_vars },
+	{ CTL_DIR, NET_DECNET_CONF_GRE,	     "ipgre",    bin_net_decnet_conf_vars },
+	{ CTL_DIR, NET_DECNET_CONF_X25,	     "x25",      bin_net_decnet_conf_vars },
+	{ CTL_DIR, NET_DECNET_CONF_PPP,	     "ppp",      bin_net_decnet_conf_vars },
+	{ CTL_DIR, NET_DECNET_CONF_DDCMP,    "ddcmp",    bin_net_decnet_conf_vars },
+	{ CTL_DIR, NET_DECNET_CONF_LOOPBACK, "loopback", bin_net_decnet_conf_vars },
+	{ CTL_DIR, 0,			     NULL,	 bin_net_decnet_conf_vars },
+	{}
+};
+
+static const struct bin_table bin_net_decnet_table[] = {
+	{ CTL_DIR,	NET_DECNET_CONF,		"conf",	bin_net_decnet_conf },
+	{ CTL_DNADR,	NET_DECNET_NODE_ADDRESS,	"node_address" },
+	{ CTL_STR,	NET_DECNET_NODE_NAME,		"node_name" },
+	{ CTL_STR,	NET_DECNET_DEFAULT_DEVICE,	"default_device" },
+	{ CTL_INT,	NET_DECNET_TIME_WAIT,		"time_wait" },
+	{ CTL_INT,	NET_DECNET_DN_COUNT,		"dn_count" },
+	{ CTL_INT,	NET_DECNET_DI_COUNT,		"di_count" },
+	{ CTL_INT,	NET_DECNET_DR_COUNT,		"dr_count" },
+	{ CTL_INT,	NET_DECNET_DST_GC_INTERVAL,	"dst_gc_interval" },
+	{ CTL_INT,	NET_DECNET_NO_FC_MAX_CWND,	"no_fc_max_cwnd" },
+	{ CTL_INT,	NET_DECNET_MEM,		"decnet_mem" },
+	{ CTL_INT,	NET_DECNET_RMEM,		"decnet_rmem" },
+	{ CTL_INT,	NET_DECNET_WMEM,		"decnet_wmem" },
+	{ CTL_INT,	NET_DECNET_DEBUG_LEVEL,	"debug" },
+	{}
+};
+
+static const struct bin_table bin_net_sctp_table[] = {
+	{ CTL_INT,	NET_SCTP_RTO_INITIAL,		"rto_initial" },
+	{ CTL_INT,	NET_SCTP_RTO_MIN,		"rto_min" },
+	{ CTL_INT,	NET_SCTP_RTO_MAX,		"rto_max" },
+	{ CTL_INT,	NET_SCTP_RTO_ALPHA,		"rto_alpha_exp_divisor" },
+	{ CTL_INT,	NET_SCTP_RTO_BETA,		"rto_beta_exp_divisor" },
+	{ CTL_INT,	NET_SCTP_VALID_COOKIE_LIFE,	"valid_cookie_life" },
+	{ CTL_INT,	NET_SCTP_ASSOCIATION_MAX_RETRANS,	"association_max_retrans" },
+	{ CTL_INT,	NET_SCTP_PATH_MAX_RETRANS,	"path_max_retrans" },
+	{ CTL_INT,	NET_SCTP_MAX_INIT_RETRANSMITS,	"max_init_retransmits" },
+	{ CTL_INT,	NET_SCTP_HB_INTERVAL,		"hb_interval" },
+	{ CTL_INT,	NET_SCTP_PRESERVE_ENABLE,	"cookie_preserve_enable" },
+	{ CTL_INT,	NET_SCTP_MAX_BURST,		"max_burst" },
+	{ CTL_INT,	NET_SCTP_ADDIP_ENABLE,		"addip_enable" },
+	{ CTL_INT,	NET_SCTP_PRSCTP_ENABLE,		"prsctp_enable" },
+	{ CTL_INT,	NET_SCTP_SNDBUF_POLICY,		"sndbuf_policy" },
+	{ CTL_INT,	NET_SCTP_SACK_TIMEOUT,		"sack_timeout" },
+	{ CTL_INT,	NET_SCTP_RCVBUF_POLICY,		"rcvbuf_policy" },
+	{}
+};
+
+static const struct bin_table bin_net_llc_llc2_timeout_table[] = {
+	{ CTL_INT,	NET_LLC2_ACK_TIMEOUT,	"ack" },
+	{ CTL_INT,	NET_LLC2_P_TIMEOUT,	"p" },
+	{ CTL_INT,	NET_LLC2_REJ_TIMEOUT,	"rej" },
+	{ CTL_INT,	NET_LLC2_BUSY_TIMEOUT,	"busy" },
+	{}
+};
+
+static const struct bin_table bin_net_llc_station_table[] = {
+	{ CTL_INT,	NET_LLC_STATION_ACK_TIMEOUT,	"ack_timeout" },
+	{}
+};
+
+static const struct bin_table bin_net_llc_llc2_table[] = {
+	{ CTL_DIR,	NET_LLC2,		"timeout",	bin_net_llc_llc2_timeout_table },
+	{}
+};
+
+static const struct bin_table bin_net_llc_table[] = {
+	{ CTL_DIR,	NET_LLC2,		"llc2",		bin_net_llc_llc2_table },
+	{ CTL_DIR,	NET_LLC_STATION,	"station",	bin_net_llc_station_table },
+	{}
+};
+
+static const struct bin_table bin_net_netfilter_table[] = {
+	{ CTL_INT,	NET_NF_CONNTRACK_MAX,			"nf_conntrack_max" },
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT "nf_conntrack_tcp_timeout_syn_sent" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV "nf_conntrack_tcp_timeout_syn_recv" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED "nf_conntrack_tcp_timeout_established" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT "nf_conntrack_tcp_timeout_fin_wait" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT "nf_conntrack_tcp_timeout_close_wait" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK "nf_conntrack_tcp_timeout_last_ack" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT "nf_conntrack_tcp_timeout_time_wait" no longer used */
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE "nf_conntrack_tcp_timeout_close" no longer used */
+	/* NET_NF_CONNTRACK_UDP_TIMEOUT	"nf_conntrack_udp_timeout" no longer used */
+	/* NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM "nf_conntrack_udp_timeout_stream" no longer used */
+	/* NET_NF_CONNTRACK_ICMP_TIMEOUT "nf_conntrack_icmp_timeout" no longer used */
+	/* NET_NF_CONNTRACK_GENERIC_TIMEOUT "nf_conntrack_generic_timeout" no longer used */
+	{ CTL_INT,	NET_NF_CONNTRACK_BUCKETS,		"nf_conntrack_buckets" },
+	{ CTL_INT,	NET_NF_CONNTRACK_LOG_INVALID,		"nf_conntrack_log_invalid" },
+	/* NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS "nf_conntrack_tcp_timeout_max_retrans" no longer used */
+	{ CTL_INT,	NET_NF_CONNTRACK_TCP_LOOSE,		"nf_conntrack_tcp_loose" },
+	{ CTL_INT,	NET_NF_CONNTRACK_TCP_BE_LIBERAL,	"nf_conntrack_tcp_be_liberal" },
+	{ CTL_INT,	NET_NF_CONNTRACK_TCP_MAX_RETRANS,	"nf_conntrack_tcp_max_retrans" },
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED "nf_conntrack_sctp_timeout_closed" no longer used */
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT "nf_conntrack_sctp_timeout_cookie_wait" no longer used */
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED "nf_conntrack_sctp_timeout_cookie_echoed" no longer used */
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED "nf_conntrack_sctp_timeout_established" no longer used */
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT "nf_conntrack_sctp_timeout_shutdown_sent" no longer used */
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD "nf_conntrack_sctp_timeout_shutdown_recd" no longer used */
+	/* NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT "nf_conntrack_sctp_timeout_shutdown_ack_sent" no longer used */
+	{ CTL_INT,	NET_NF_CONNTRACK_COUNT,			"nf_conntrack_count" },
+	/* NET_NF_CONNTRACK_ICMPV6_TIMEOUT "nf_conntrack_icmpv6_timeout" no longer used */
+	/* NET_NF_CONNTRACK_FRAG6_TIMEOUT "nf_conntrack_frag6_timeout" no longer used */
+	{ CTL_INT,	NET_NF_CONNTRACK_FRAG6_LOW_THRESH,	"nf_conntrack_frag6_low_thresh" },
+	{ CTL_INT,	NET_NF_CONNTRACK_FRAG6_HIGH_THRESH,	"nf_conntrack_frag6_high_thresh" },
+	{ CTL_INT,	NET_NF_CONNTRACK_CHECKSUM,		"nf_conntrack_checksum" },
+
+	{}
+};
+
+static const struct bin_table bin_net_irda_table[] = {
+	{ CTL_INT,	NET_IRDA_DISCOVERY,		"discovery" },
+	{ CTL_STR,	NET_IRDA_DEVNAME,		"devname" },
+	{ CTL_INT,	NET_IRDA_DEBUG,			"debug" },
+	{ CTL_INT,	NET_IRDA_FAST_POLL,		"fast_poll_increase" },
+	{ CTL_INT,	NET_IRDA_DISCOVERY_SLOTS,	"discovery_slots" },
+	{ CTL_INT,	NET_IRDA_DISCOVERY_TIMEOUT,	"discovery_timeout" },
+	{ CTL_INT,	NET_IRDA_SLOT_TIMEOUT,		"slot_timeout" },
+	{ CTL_INT,	NET_IRDA_MAX_BAUD_RATE,		"max_baud_rate" },
+	{ CTL_INT,	NET_IRDA_MIN_TX_TURN_TIME,	"min_tx_turn_time" },
+	{ CTL_INT,	NET_IRDA_MAX_TX_DATA_SIZE,	"max_tx_data_size" },
+	{ CTL_INT,	NET_IRDA_MAX_TX_WINDOW,		"max_tx_window" },
+	{ CTL_INT,	NET_IRDA_MAX_NOREPLY_TIME,	"max_noreply_time" },
+	{ CTL_INT,	NET_IRDA_WARN_NOREPLY_TIME,	"warn_noreply_time" },
+	{ CTL_INT,	NET_IRDA_LAP_KEEPALIVE_TIME,	"lap_keepalive_time" },
+	{}
+};
+
+static const struct bin_table bin_net_table[] = {
+	{ CTL_DIR,	NET_CORE,		"core",		bin_net_core_table },
+	/* NET_ETHER not used */
+	/* NET_802 not used */
+	{ CTL_DIR,	NET_UNIX,		"unix",		bin_net_unix_table },
+	{ CTL_DIR,	NET_IPV4,		"ipv4",		bin_net_ipv4_table },
+	{ CTL_DIR,	NET_IPX,		"ipx",		bin_net_ipx_table },
+	{ CTL_DIR,	NET_ATALK,		"appletalk",	bin_net_atalk_table },
+	{ CTL_DIR,	NET_NETROM,		"netrom",	bin_net_netrom_table },
+	{ CTL_DIR,	NET_AX25,		"ax25",		bin_net_ax25_table },
+	/*  NET_BRIDGE "bridge" no longer used */
+	{ CTL_DIR,	NET_ROSE,		"rose",		bin_net_rose_table },
+	{ CTL_DIR,	NET_IPV6,		"ipv6",		bin_net_ipv6_table },
+	{ CTL_DIR,	NET_X25,		"x25",		bin_net_x25_table },
+	{ CTL_DIR,	NET_TR,			"token-ring",	bin_net_tr_table },
+	{ CTL_DIR,	NET_DECNET,		"decnet",	bin_net_decnet_table },
+	/*  NET_ECONET not used */
+	{ CTL_DIR,	NET_SCTP,		"sctp",		bin_net_sctp_table },
+	{ CTL_DIR,	NET_LLC,		"llc",		bin_net_llc_table },
+	{ CTL_DIR,	NET_NETFILTER,		"netfilter",	bin_net_netfilter_table },
+	/* NET_DCCP "dccp" no longer used */
+	{ CTL_DIR,	NET_IRDA,		"irda",		bin_net_irda_table },
+	{ CTL_INT,	2089,			"nf_conntrack_max" },
+	{}
+};
+
+static const struct bin_table bin_fs_quota_table[] = {
+	{ CTL_INT,	FS_DQ_LOOKUPS,		"lookups" },
+	{ CTL_INT,	FS_DQ_DROPS,		"drops" },
+	{ CTL_INT,	FS_DQ_READS,		"reads" },
+	{ CTL_INT,	FS_DQ_WRITES,		"writes" },
+	{ CTL_INT,	FS_DQ_CACHE_HITS,	"cache_hits" },
+	{ CTL_INT,	FS_DQ_ALLOCATED,	"allocated_dquots" },
+	{ CTL_INT,	FS_DQ_FREE,		"free_dquots" },
+	{ CTL_INT,	FS_DQ_SYNCS,		"syncs" },
+	{ CTL_INT,	FS_DQ_WARNINGS,		"warnings" },
+	{}
+};
+
+static const struct bin_table bin_fs_xfs_table[] = {
+	{ CTL_INT,	XFS_SGID_INHERIT,	"irix_sgid_inherit" },
+	{ CTL_INT,	XFS_SYMLINK_MODE,	"irix_symlink_mode" },
+	{ CTL_INT,	XFS_PANIC_MASK,		"panic_mask" },
+
+	{ CTL_INT,	XFS_ERRLEVEL,		"error_level" },
+	{ CTL_INT,	XFS_SYNCD_TIMER,	"xfssyncd_centisecs" },
+	{ CTL_INT,	XFS_INHERIT_SYNC,	"inherit_sync" },
+	{ CTL_INT,	XFS_INHERIT_NODUMP,	"inherit_nodump" },
+	{ CTL_INT,	XFS_INHERIT_NOATIME,	"inherit_noatime" },
+	{ CTL_INT,	XFS_BUF_TIMER,		"xfsbufd_centisecs" },
+	{ CTL_INT,	XFS_BUF_AGE,		"age_buffer_centisecs" },
+	{ CTL_INT,	XFS_INHERIT_NOSYM,	"inherit_nosymlinks" },
+	{ CTL_INT,	XFS_ROTORSTEP,	"rotorstep" },
+	{ CTL_INT,	XFS_INHERIT_NODFRG,	"inherit_nodefrag" },
+	{ CTL_INT,	XFS_FILESTREAM_TIMER,	"filestream_centisecs" },
+	{ CTL_INT,	XFS_STATS_CLEAR,	"stats_clear" },
+	{}
+};
+
+static const struct bin_table bin_fs_ocfs2_nm_table[] = {
+	{ CTL_STR,	1, "hb_ctl_path" },
+	{}
+};
+
+static const struct bin_table bin_fs_ocfs2_table[] = {
+	{ CTL_DIR,	1,	"nm",	bin_fs_ocfs2_nm_table },
+	{}
+};
+
+static const struct bin_table bin_inotify_table[] = {
+	{ CTL_INT,	INOTIFY_MAX_USER_INSTANCES,	"max_user_instances" },
+	{ CTL_INT,	INOTIFY_MAX_USER_WATCHES,	"max_user_watches" },
+	{ CTL_INT,	INOTIFY_MAX_QUEUED_EVENTS,	"max_queued_events" },
+	{}
+};
+
+static const struct bin_table bin_fs_table[] = {
+	{ CTL_INT,	FS_NRINODE,		"inode-nr" },
+	{ CTL_INT,	FS_STATINODE,		"inode-state" },
+	/* FS_MAXINODE unused */
+	/* FS_NRDQUOT unused */
+	/* FS_MAXDQUOT unused */
+	/* FS_NRFILE "file-nr" no longer used */
+	{ CTL_INT,	FS_MAXFILE,		"file-max" },
+	{ CTL_INT,	FS_DENTRY,		"dentry-state" },
+	/* FS_NRSUPER unused */
+	/* FS_MAXUPSER unused */
+	{ CTL_INT,	FS_OVERFLOWUID,		"overflowuid" },
+	{ CTL_INT,	FS_OVERFLOWGID,		"overflowgid" },
+	{ CTL_INT,	FS_LEASES,		"leases-enable" },
+	{ CTL_INT,	FS_DIR_NOTIFY,		"dir-notify-enable" },
+	{ CTL_INT,	FS_LEASE_TIME,		"lease-break-time" },
+	{ CTL_DIR,	FS_DQSTATS,		"quota",	bin_fs_quota_table },
+	{ CTL_DIR,	FS_XFS,			"xfs",		bin_fs_xfs_table },
+	{ CTL_ULONG,	FS_AIO_NR,		"aio-nr" },
+	{ CTL_ULONG,	FS_AIO_MAX_NR,		"aio-max-nr" },
+	{ CTL_DIR,	FS_INOTIFY,		"inotify",	bin_inotify_table },
+	{ CTL_DIR,	FS_OCFS2,		"ocfs2",	bin_fs_ocfs2_table },
+	{ CTL_INT,	KERN_SETUID_DUMPABLE,	"suid_dumpable" },
+	{}
+};
+
+static const struct bin_table bin_ipmi_table[] = {
+	{ CTL_INT,	DEV_IPMI_POWEROFF_POWERCYCLE,	"poweroff_powercycle" },
+	{}
+};
+
+static const struct bin_table bin_mac_hid_files[] = {
+	/* DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES unused */
+	/* DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES unused */
+	{ CTL_INT,	DEV_MAC_HID_MOUSE_BUTTON_EMULATION,	"mouse_button_emulation" },
+	{ CTL_INT,	DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE,	"mouse_button2_keycode" },
+	{ CTL_INT,	DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE,	"mouse_button3_keycode" },
+	/* DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES unused */
+	{}
+};
+
+static const struct bin_table bin_raid_table[] = {
+	{ CTL_INT,	DEV_RAID_SPEED_LIMIT_MIN,	"speed_limit_min" },
+	{ CTL_INT,	DEV_RAID_SPEED_LIMIT_MAX,	"speed_limit_max" },
+	{}
+};
+
+static const struct bin_table bin_scsi_table[] = {
+	{ CTL_INT, DEV_SCSI_LOGGING_LEVEL, "logging_level" },
+	{}
+};
+
+static const struct bin_table bin_dev_table[] = {
+	/* DEV_CDROM	"cdrom" no longer used */
+	/* DEV_HWMON unused */
+	/* DEV_PARPORT	"parport" no longer used */
+	{ CTL_DIR,	DEV_RAID,	"raid",		bin_raid_table },
+	{ CTL_DIR,	DEV_MAC_HID,	"mac_hid",	bin_mac_hid_files },
+	{ CTL_DIR,	DEV_SCSI,	"scsi",		bin_scsi_table },
+	{ CTL_DIR,	DEV_IPMI,	"ipmi",		bin_ipmi_table },
+	{}
+};
+
+static const struct bin_table bin_bus_isa_table[] = {
+	{ CTL_INT,	BUS_ISA_MEM_BASE,	"membase" },
+	{ CTL_INT,	BUS_ISA_PORT_BASE,	"portbase" },
+	{ CTL_INT,	BUS_ISA_PORT_SHIFT,	"portshift" },
+	{}
+};
+
+static const struct bin_table bin_bus_table[] = {
+	{ CTL_DIR,	CTL_BUS_ISA,	"isa",	bin_bus_isa_table },
+	{}
+};
+
+
+static const struct bin_table bin_s390dbf_table[] = {
+	{ CTL_INT,	5678 /* CTL_S390DBF_STOPPABLE */, "debug_stoppable" },
+	{ CTL_INT,	5679 /* CTL_S390DBF_ACTIVE */,	  "debug_active" },
+	{}
+};
+
+static const struct bin_table bin_sunrpc_table[] = {
+	/* CTL_RPCDEBUG	"rpc_debug"  no longer used */
+	/* CTL_NFSDEBUG "nfs_debug"  no longer used */
+	/* CTL_NFSDDEBUG "nfsd_debug" no longer used  */
+	/* CTL_NLMDEBUG "nlm_debug" no longer used */
+
+	{ CTL_INT,	CTL_SLOTTABLE_UDP,	"udp_slot_table_entries" },
+	{ CTL_INT,	CTL_SLOTTABLE_TCP,	"tcp_slot_table_entries" },
+	{ CTL_INT,	CTL_MIN_RESVPORT,	"min_resvport" },
+	{ CTL_INT,	CTL_MAX_RESVPORT,	"max_resvport" },
+	{}
+};
+
+static const struct bin_table bin_pm_table[] = {
+	/* frv specific */
+	/* 1 == CTL_PM_SUSPEND	"suspend"  no longer used" */
+	{ CTL_INT,	2 /* CTL_PM_CMODE */,		"cmode" },
+	{ CTL_INT,	3 /* CTL_PM_P0 */,		"p0" },
+	{ CTL_INT,	4 /* CTL_PM_CM */,		"cm" },
+	{}
+};
+
+static const struct bin_table bin_root_table[] = {
+	{ CTL_DIR,	CTL_KERN,	"kernel",	bin_kern_table },
+	{ CTL_DIR,	CTL_VM,		"vm",		bin_vm_table },
+	{ CTL_DIR,	CTL_NET,	"net",		bin_net_table },
+	/* CTL_PROC not used */
+	{ CTL_DIR,	CTL_FS,		"fs",		bin_fs_table },
+	/* CTL_DEBUG "debug" no longer used */
+	{ CTL_DIR,	CTL_DEV,	"dev",		bin_dev_table },
+	{ CTL_DIR,	CTL_BUS,	"bus",		bin_bus_table },
+	{ CTL_DIR,	CTL_ABI,	"abi" },
+	/* CTL_CPU not used */
+	/* CTL_ARLAN "arlan" no longer used */
+	{ CTL_DIR,	CTL_S390DBF,	"s390dbf",	bin_s390dbf_table },
+	{ CTL_DIR,	CTL_SUNRPC,	"sunrpc",	bin_sunrpc_table },
+	{ CTL_DIR,	CTL_PM,		"pm",		bin_pm_table },
+	{}
+};
+
+static ssize_t bin_dir(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	return -ENOTDIR;
+}
+
+
+static ssize_t bin_string(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	ssize_t result, copied = 0;
+
+	if (oldval && oldlen) {
+		char __user *lastp;
+		loff_t pos = 0;
+		int ch;
+
+		result = vfs_read(file, oldval, oldlen, &pos);
+		if (result < 0)
+			goto out;
+
+		copied = result;
+		lastp = oldval + copied - 1;
+
+		result = -EFAULT;
+		if (get_user(ch, lastp))
+			goto out;
+
+		/* Trim off the trailing newline */
+		if (ch == '\n') {
+			result = -EFAULT;
+			if (put_user('\0', lastp))
+				goto out;
+			copied -= 1;
+		}
+	}
+
+	if (newval && newlen) {
+		loff_t pos = 0;
+
+		result = vfs_write(file, newval, newlen, &pos);
+		if (result < 0)
+			goto out;
+	}
+
+	result = copied;
+out:
+	return result;
+}
+
+static ssize_t bin_intvec(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	mm_segment_t old_fs = get_fs();
+	ssize_t copied = 0;
+	char *buffer;
+	ssize_t result;
+
+	result = -ENOMEM;
+	buffer = kmalloc(BUFSZ, GFP_KERNEL);
+	if (!buffer)
+		goto out;
+
+	if (oldval && oldlen) {
+		unsigned __user *vec = oldval;
+		size_t length = oldlen / sizeof(*vec);
+		loff_t pos = 0;
+		char *str, *end;
+		int i;
+
+		set_fs(KERNEL_DS);
+		result = vfs_read(file, buffer, BUFSZ - 1, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out_kfree;
+
+		str = buffer;
+		end = str + result;
+		*end++ = '\0';
+		for (i = 0; i < length; i++) {
+			unsigned long value;
+
+			value = simple_strtoul(str, &str, 10);
+			while (isspace(*str))
+				str++;
+			
+			result = -EFAULT;
+			if (put_user(value, vec + i))
+				goto out_kfree;
+
+			copied += sizeof(*vec);
+			if (!isdigit(*str))
+				break;
+		}
+	}
+
+	if (newval && newlen) {
+		unsigned __user *vec = newval;
+		size_t length = newlen / sizeof(*vec);
+		loff_t pos = 0;
+		char *str, *end;
+		int i;
+
+		str = buffer;
+		end = str + BUFSZ;
+		for (i = 0; i < length; i++) {
+			unsigned long value;
+
+			result = -EFAULT;
+			if (get_user(value, vec + i))
+				goto out_kfree;
+
+			str += snprintf(str, end - str, "%lu\t", value);
+		}
+
+		set_fs(KERNEL_DS);
+		result = vfs_write(file, buffer, str - buffer, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out_kfree;
+	}
+	result = copied;
+out_kfree:
+	kfree(buffer);
+out:
+	return result;
+}
+
+static ssize_t bin_ulongvec(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	mm_segment_t old_fs = get_fs();
+	ssize_t copied = 0;
+	char *buffer;
+	ssize_t result;
+
+	result = -ENOMEM;
+	buffer = kmalloc(BUFSZ, GFP_KERNEL);
+	if (!buffer)
+		goto out;
+
+	if (oldval && oldlen) {
+		unsigned long __user *vec = oldval;
+		size_t length = oldlen / sizeof(*vec);
+		loff_t pos = 0;
+		char *str, *end;
+		int i;
+
+		set_fs(KERNEL_DS);
+		result = vfs_read(file, buffer, BUFSZ - 1, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out_kfree;
+
+		str = buffer;
+		end = str + result;
+		*end++ = '\0';
+		for (i = 0; i < length; i++) {
+			unsigned long value;
+
+			value = simple_strtoul(str, &str, 10);
+			while (isspace(*str))
+				str++;
+			
+			result = -EFAULT;
+			if (put_user(value, vec + i))
+				goto out_kfree;
+
+			copied += sizeof(*vec);
+			if (!isdigit(*str))
+				break;
+		}
+	}
+
+	if (newval && newlen) {
+		unsigned long __user *vec = newval;
+		size_t length = newlen / sizeof(*vec);
+		loff_t pos = 0;
+		char *str, *end;
+		int i;
+
+		str = buffer;
+		end = str + BUFSZ;
+		for (i = 0; i < length; i++) {
+			unsigned long value;
+
+			result = -EFAULT;
+			if (get_user(value, vec + i))
+				goto out_kfree;
+
+			str += snprintf(str, end - str, "%lu\t", value);
+		}
+
+		set_fs(KERNEL_DS);
+		result = vfs_write(file, buffer, str - buffer, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out_kfree;
+	}
+	result = copied;
+out_kfree:
+	kfree(buffer);
+out:
+	return result;
+}
+
+static unsigned hex_value(int ch)
+{
+	return isdigit(ch) ? ch - '0' : ((ch | 0x20) - 'a') + 10;
+}
+
+static ssize_t bin_uuid(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	mm_segment_t old_fs = get_fs();
+	ssize_t result, copied = 0;
+
+	/* Only supports reads */
+	if (oldval && oldlen) {
+		loff_t pos = 0;
+		char buf[40], *str = buf;
+		unsigned char uuid[16];
+		int i;
+
+		set_fs(KERNEL_DS);
+		result = vfs_read(file, buf, sizeof(buf) - 1, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out;
+
+		buf[result] = '\0';
+
+		/* Convert the uuid to from a string to binary */
+		for (i = 0; i < 16; i++) {
+			result = -EIO;
+			if (!isxdigit(str[0]) || !isxdigit(str[1]))
+				goto out;
+
+			uuid[i] = (hex_value(str[0]) << 4) | hex_value(str[1]);
+			str += 2;
+			if (*str == '-')
+				str++;
+		}
+
+		if (oldlen > 16)
+			oldlen = 16;
+
+		result = -EFAULT;
+		if (copy_to_user(oldval, uuid, oldlen))
+			goto out;
+
+		copied = oldlen;
+	}
+	result = copied;
+out:
+	return result;
+}
+
+static ssize_t bin_dn_node_address(struct file *file,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	mm_segment_t old_fs = get_fs();
+	ssize_t result, copied = 0;
+
+	if (oldval && oldlen) {
+		loff_t pos = 0;
+		char buf[15], *nodep;
+		unsigned long area, node;
+		__le16 dnaddr;
+
+		set_fs(KERNEL_DS);
+		result = vfs_read(file, buf, sizeof(buf) - 1, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out;
+
+		buf[result] = '\0';
+
+		/* Convert the decnet addresss to binary */
+		result = -EIO;
+		nodep = strchr(buf, '.') + 1;
+		if (!nodep)
+			goto out;
+
+		area = simple_strtoul(buf, NULL, 10);
+		node = simple_strtoul(nodep, NULL, 10);
+
+		result = -EIO;
+		if ((area > 63)||(node > 1023))
+			goto out;
+
+		dnaddr = cpu_to_le16((area << 10) | node);
+
+		result = -EFAULT;
+		if (put_user(dnaddr, (__le16 __user *)oldval))
+			goto out;
+
+		copied = sizeof(dnaddr);
+	}
+
+	if (newval && newlen) {
+		loff_t pos = 0;
+		__le16 dnaddr;
+		char buf[15];
+		int len;
+
+		result = -EINVAL;
+		if (newlen != sizeof(dnaddr))
+			goto out;
+
+		result = -EFAULT;
+		if (get_user(dnaddr, (__le16 __user *)newval))
+			goto out;
+
+		len = snprintf(buf, sizeof(buf), "%hu.%hu",
+				le16_to_cpu(dnaddr) >> 10,
+				le16_to_cpu(dnaddr) & 0x3ff);
+
+		set_fs(KERNEL_DS);
+		result = vfs_write(file, buf, len, &pos);
+		set_fs(old_fs);
+		if (result < 0)
+			goto out;
+	}
+
+	result = copied;
+out:
+	return result;
+}
+
+static const struct bin_table *get_sysctl(const int *name, int nlen, char *path)
+{
+	const struct bin_table *table = &bin_root_table[0];
+	int ctl_name;
+
+	/* The binary sysctl tables have a small maximum depth so
+	 * there is no danger of overflowing our path as it PATH_MAX
+	 * bytes long.
+	 */
+	memcpy(path, "sys/", 4);
+	path += 4;
+
+repeat:
+	if (!nlen)
+		return ERR_PTR(-ENOTDIR);
+	ctl_name = *name;
+	name++;
+	nlen--;
+	for ( ; table->convert; table++) {
+		int len = 0;
+
+		/*
+		 * For a wild card entry map from ifindex to network
+		 * device name.
+		 */
+		if (!table->ctl_name) {
+#ifdef CONFIG_NET
+			struct net *net = current->nsproxy->net_ns;
+			struct net_device *dev;
+			dev = dev_get_by_index(net, ctl_name);
+			if (dev) {
+				len = strlen(dev->name);
+				memcpy(path, dev->name, len);
+				dev_put(dev);
+			}
+#endif
+		/* Use the well known sysctl number to proc name mapping */
+		} else if (ctl_name == table->ctl_name) {
+			len = strlen(table->procname);
+			memcpy(path, table->procname, len);
+		}
+		if (len) {
+			path += len;
+			if (table->child) {
+				*path++ = '/';
+				table = table->child;
+				goto repeat;
+			}
+			*path = '\0';
+			return table;
+		}
+	}
+	return ERR_PTR(-ENOTDIR);
+}
+
+static char *sysctl_getname(const int *name, int nlen, const struct bin_table **tablep)
+{
+	char *tmp, *result;
+
+	result = ERR_PTR(-ENOMEM);
+	tmp = __getname();
+	if (tmp) {
+		const struct bin_table *table = get_sysctl(name, nlen, tmp);
+		result = tmp;
+		*tablep = table;
+		if (IS_ERR(table)) {
+			__putname(tmp);
+			result = ERR_CAST(table);
+		}
+	}
+	return result;
+}
+
+static ssize_t binary_sysctl(const int *name, int nlen,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	const struct bin_table *table = NULL;
+	struct nameidata nd;
+	struct vfsmount *mnt;
+	struct file *file;
+	ssize_t result;
+	char *pathname;
+	int flags;
+	int acc_mode, fmode;
+
+	pathname = sysctl_getname(name, nlen, &table);
+	result = PTR_ERR(pathname);
+	if (IS_ERR(pathname))
+		goto out;
+
+	/* How should the sysctl be accessed? */
+	if (oldval && oldlen && newval && newlen) {
+		flags = O_RDWR;
+		acc_mode = MAY_READ | MAY_WRITE;
+		fmode = FMODE_READ | FMODE_WRITE;
+	} else if (newval && newlen) {
+		flags = O_WRONLY;
+		acc_mode = MAY_WRITE;
+		fmode = FMODE_WRITE;
+	} else if (oldval && oldlen) {
+		flags = O_RDONLY;
+		acc_mode = MAY_READ;
+		fmode = FMODE_READ;
+	} else {
+		result = 0;
+		goto out_putname;
+	}
+
+	mnt = current->nsproxy->pid_ns->proc_mnt;
+	result = vfs_path_lookup(mnt->mnt_root, mnt, pathname, 0, &nd);
+	if (result)
+		goto out_putname;
+
+	result = may_open(&nd.path, acc_mode, fmode);
+	if (result)
+		goto out_putpath;
+
+	file = dentry_open(nd.path.dentry, nd.path.mnt, flags, current_cred());
+	result = PTR_ERR(file);
+	if (IS_ERR(file))
+		goto out_putname;
+
+	result = table->convert(file, oldval, oldlen, newval, newlen);
+
+	fput(file);
+out_putname:
+	putname(pathname);
+out:
+	return result;
+
+out_putpath:
+	path_put(&nd.path);
+	goto out_putname;
+}
+
+
+#else /* CONFIG_SYSCTL_SYSCALL */
+
+static ssize_t binary_sysctl(const int *name, int nlen,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	return -ENOSYS;
+}
+
+#endif /* CONFIG_SYSCTL_SYSCALL */
+
+
+static void deprecated_sysctl_warning(const int *name, int nlen)
+{
+	int i;
+
+	if (printk_ratelimit()) {
+		printk(KERN_INFO
+			"warning: process `%s' used the deprecated sysctl "
+			"system call with ", current->comm);
+		for (i = 0; i < nlen; i++)
+			printk("%d.", name[i]);
+		printk("\n");
+	}
+	return;
+}
+
+static ssize_t do_sysctl(int __user *args_name, int nlen,
+	void __user *oldval, size_t oldlen, void __user *newval, size_t newlen)
+{
+	int name[CTL_MAXNAME];
+	int i;
+
+	/* Check args->nlen. */
+	if (nlen < 0 || nlen > CTL_MAXNAME)
+		return -ENOTDIR;
+	/* Read in the sysctl name for simplicity */
+	for (i = 0; i < nlen; i++)
+		if (get_user(name[i], args_name + i))
+			return -EFAULT;
+
+	deprecated_sysctl_warning(name, nlen);
+
+	return binary_sysctl(name, nlen, oldval, oldlen, newval, newlen);
+}
+
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
+{
+	struct __sysctl_args tmp;
+	size_t oldlen = 0;
+	ssize_t result;
+
+	if (copy_from_user(&tmp, args, sizeof(tmp)))
+		return -EFAULT;
+
+	if (tmp.oldval && !tmp.oldlenp)
+		return -EFAULT;
+
+	if (tmp.oldlenp && get_user(oldlen, tmp.oldlenp))
+		return -EFAULT;
+
+	result = do_sysctl(tmp.name, tmp.nlen, tmp.oldval, oldlen,
+			   tmp.newval, tmp.newlen);
+
+	if (result >= 0) {
+		oldlen = result;
+		result = 0;
+	}
+
+	if (tmp.oldlenp && put_user(oldlen, tmp.oldlenp))
+		return -EFAULT;
+
+	return result;
+}
+
+
+#ifdef CONFIG_COMPAT
+#include <asm/compat.h>
+
+struct compat_sysctl_args {
+	compat_uptr_t	name;
+	int		nlen;
+	compat_uptr_t	oldval;
+	compat_uptr_t	oldlenp;
+	compat_uptr_t	newval;
+	compat_size_t	newlen;
+	compat_ulong_t	__unused[4];
+};
+
+asmlinkage long compat_sys_sysctl(struct compat_sysctl_args __user *args)
+{
+	struct compat_sysctl_args tmp;
+	compat_size_t __user *compat_oldlenp;
+	size_t oldlen = 0;
+	ssize_t result;
+
+	if (copy_from_user(&tmp, args, sizeof(tmp)))
+		return -EFAULT;
+
+	if (tmp.oldval && !tmp.oldlenp)
+		return -EFAULT;
+
+	compat_oldlenp = compat_ptr(tmp.oldlenp);
+	if (compat_oldlenp && get_user(oldlen, compat_oldlenp))
+		return -EFAULT;
+
+	result = do_sysctl(compat_ptr(tmp.name), tmp.nlen,
+			   compat_ptr(tmp.oldval), oldlen,
+			   compat_ptr(tmp.newval), tmp.newlen);
+
+	if (result >= 0) {
+		oldlen = result;
+		result = 0;
+	}
+
+	if (compat_oldlenp && put_user(oldlen, compat_oldlenp))
+		return -EFAULT;
+
+	return result;
+}
+
+#endif /* CONFIG_COMPAT */
diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c
index b6e7aaea..04cdcf7 100644
--- a/kernel/sysctl_check.c
+++ b/kernel/sysctl_check.c
@@ -5,1239 +5,6 @@
 #include <linux/string.h>
 #include <net/ip_vs.h>
 
-struct trans_ctl_table {
-	int			ctl_name;
-	const char		*procname;
-	const struct trans_ctl_table *child;
-};
-
-static const struct trans_ctl_table trans_random_table[] = {
-	{ RANDOM_POOLSIZE,	"poolsize" },
-	{ RANDOM_ENTROPY_COUNT,	"entropy_avail" },
-	{ RANDOM_READ_THRESH,	"read_wakeup_threshold" },
-	{ RANDOM_WRITE_THRESH,	"write_wakeup_threshold" },
-	{ RANDOM_BOOT_ID,	"boot_id" },
-	{ RANDOM_UUID,		"uuid" },
-	{}
-};
-
-static const struct trans_ctl_table trans_pty_table[] = {
-	{ PTY_MAX,		"max" },
-	{ PTY_NR,		"nr" },
-	{}
-};
-
-static const struct trans_ctl_table trans_kern_table[] = {
-	{ KERN_OSTYPE,			"ostype" },
-	{ KERN_OSRELEASE,		"osrelease" },
-	/* KERN_OSREV not used */
-	{ KERN_VERSION,			"version" },
-	/* KERN_SECUREMASK not used */
-	/* KERN_PROF not used */
-	{ KERN_NODENAME,		"hostname" },
-	{ KERN_DOMAINNAME,		"domainname" },
-
-	{ KERN_PANIC,			"panic" },
-	{ KERN_REALROOTDEV,		"real-root-dev" },
-
-	{ KERN_SPARC_REBOOT,		"reboot-cmd" },
-	{ KERN_CTLALTDEL,		"ctrl-alt-del" },
-	{ KERN_PRINTK,			"printk" },
-
-	/* KERN_NAMETRANS not used */
-	/* KERN_PPC_HTABRECLAIM not used */
-	/* KERN_PPC_ZEROPAGED not used */
-	{ KERN_PPC_POWERSAVE_NAP,	"powersave-nap" },
-
-	{ KERN_MODPROBE,		"modprobe" },
-	{ KERN_SG_BIG_BUFF,		"sg-big-buff" },
-	{ KERN_ACCT,			"acct" },
-	{ KERN_PPC_L2CR,		"l2cr" },
-
-	/* KERN_RTSIGNR not used */
-	/* KERN_RTSIGMAX not used */
-
-	{ KERN_SHMMAX,			"shmmax" },
-	{ KERN_MSGMAX,			"msgmax" },
-	{ KERN_MSGMNB,			"msgmnb" },
-	/* KERN_MSGPOOL not used*/
-	{ KERN_SYSRQ,			"sysrq" },
-	{ KERN_MAX_THREADS,		"threads-max" },
-	{ KERN_RANDOM,			"random",	trans_random_table },
-	{ KERN_SHMALL,			"shmall" },
-	{ KERN_MSGMNI,			"msgmni" },
-	{ KERN_SEM,			"sem" },
-	{ KERN_SPARC_STOP_A,		"stop-a" },
-	{ KERN_SHMMNI,			"shmmni" },
-
-	{ KERN_OVERFLOWUID,		"overflowuid" },
-	{ KERN_OVERFLOWGID,		"overflowgid" },
-
-	{ KERN_HOTPLUG,			"hotplug", },
-	{ KERN_IEEE_EMULATION_WARNINGS,	"ieee_emulation_warnings" },
-
-	{ KERN_S390_USER_DEBUG_LOGGING,	"userprocess_debug" },
-	{ KERN_CORE_USES_PID,		"core_uses_pid" },
-	{ KERN_TAINTED,			"tainted" },
-	{ KERN_CADPID,			"cad_pid" },
-	{ KERN_PIDMAX,			"pid_max" },
-	{ KERN_CORE_PATTERN,		"core_pattern" },
-	{ KERN_PANIC_ON_OOPS,		"panic_on_oops" },
-	{ KERN_HPPA_PWRSW,		"soft-power" },
-	{ KERN_HPPA_UNALIGNED,		"unaligned-trap" },
-
-	{ KERN_PRINTK_RATELIMIT,	"printk_ratelimit" },
-	{ KERN_PRINTK_RATELIMIT_BURST,	"printk_ratelimit_burst" },
-
-	{ KERN_PTY,			"pty",		trans_pty_table },
-	{ KERN_NGROUPS_MAX,		"ngroups_max" },
-	{ KERN_SPARC_SCONS_PWROFF,	"scons-poweroff" },
-	{ KERN_HZ_TIMER,		"hz_timer" },
-	{ KERN_UNKNOWN_NMI_PANIC,	"unknown_nmi_panic" },
-	{ KERN_BOOTLOADER_TYPE,		"bootloader_type" },
-	{ KERN_RANDOMIZE,		"randomize_va_space" },
-
-	{ KERN_SPIN_RETRY,		"spin_retry" },
-	{ KERN_ACPI_VIDEO_FLAGS,	"acpi_video_flags" },
-	{ KERN_IA64_UNALIGNED,		"ignore-unaligned-usertrap" },
-	{ KERN_COMPAT_LOG,		"compat-log" },
-	{ KERN_MAX_LOCK_DEPTH,		"max_lock_depth" },
-	{ KERN_NMI_WATCHDOG,		"nmi_watchdog" },
-	{ KERN_PANIC_ON_NMI,		"panic_on_unrecovered_nmi" },
-	{}
-};
-
-static const struct trans_ctl_table trans_vm_table[] = {
-	{ VM_OVERCOMMIT_MEMORY,		"overcommit_memory" },
-	{ VM_PAGE_CLUSTER,		"page-cluster" },
-	{ VM_DIRTY_BACKGROUND,		"dirty_background_ratio" },
-	{ VM_DIRTY_RATIO,		"dirty_ratio" },
-	{ VM_DIRTY_WB_CS,		"dirty_writeback_centisecs" },
-	{ VM_DIRTY_EXPIRE_CS,		"dirty_expire_centisecs" },
-	{ VM_NR_PDFLUSH_THREADS,	"nr_pdflush_threads" },
-	{ VM_OVERCOMMIT_RATIO,		"overcommit_ratio" },
-	/* VM_PAGEBUF unused */
-	{ VM_HUGETLB_PAGES,		"nr_hugepages" },
-	{ VM_SWAPPINESS,		"swappiness" },
-	{ VM_LOWMEM_RESERVE_RATIO,	"lowmem_reserve_ratio" },
-	{ VM_MIN_FREE_KBYTES,		"min_free_kbytes" },
-	{ VM_MAX_MAP_COUNT,		"max_map_count" },
-	{ VM_LAPTOP_MODE,		"laptop_mode" },
-	{ VM_BLOCK_DUMP,		"block_dump" },
-	{ VM_HUGETLB_GROUP,		"hugetlb_shm_group" },
-	{ VM_VFS_CACHE_PRESSURE,	"vfs_cache_pressure" },
-	{ VM_LEGACY_VA_LAYOUT,		"legacy_va_layout" },
-	/* VM_SWAP_TOKEN_TIMEOUT unused */
-	{ VM_DROP_PAGECACHE,		"drop_caches" },
-	{ VM_PERCPU_PAGELIST_FRACTION,	"percpu_pagelist_fraction" },
-	{ VM_ZONE_RECLAIM_MODE,		"zone_reclaim_mode" },
-	{ VM_MIN_UNMAPPED,		"min_unmapped_ratio" },
-	{ VM_PANIC_ON_OOM,		"panic_on_oom" },
-	{ VM_VDSO_ENABLED,		"vdso_enabled" },
-	{ VM_MIN_SLAB,			"min_slab_ratio" },
-
-	{}
-};
-
-static const struct trans_ctl_table trans_net_core_table[] = {
-	{ NET_CORE_WMEM_MAX,		"wmem_max" },
-	{ NET_CORE_RMEM_MAX,		"rmem_max" },
-	{ NET_CORE_WMEM_DEFAULT,	"wmem_default" },
-	{ NET_CORE_RMEM_DEFAULT,	"rmem_default" },
-	/* NET_CORE_DESTROY_DELAY unused */
-	{ NET_CORE_MAX_BACKLOG,		"netdev_max_backlog" },
-	/* NET_CORE_FASTROUTE unused */
-	{ NET_CORE_MSG_COST,		"message_cost" },
-	{ NET_CORE_MSG_BURST,		"message_burst" },
-	{ NET_CORE_OPTMEM_MAX,		"optmem_max" },
-	/* NET_CORE_HOT_LIST_LENGTH unused */
-	/* NET_CORE_DIVERT_VERSION unused */
-	/* NET_CORE_NO_CONG_THRESH unused */
-	/* NET_CORE_NO_CONG unused */
-	/* NET_CORE_LO_CONG unused */
-	/* NET_CORE_MOD_CONG unused */
-	{ NET_CORE_DEV_WEIGHT,		"dev_weight" },
-	{ NET_CORE_SOMAXCONN,		"somaxconn" },
-	{ NET_CORE_BUDGET,		"netdev_budget" },
-	{ NET_CORE_AEVENT_ETIME,	"xfrm_aevent_etime" },
-	{ NET_CORE_AEVENT_RSEQTH,	"xfrm_aevent_rseqth" },
-	{ NET_CORE_WARNINGS,		"warnings" },
-	{},
-};
-
-static const struct trans_ctl_table trans_net_unix_table[] = {
-	/* NET_UNIX_DESTROY_DELAY unused */
-	/* NET_UNIX_DELETE_DELAY unused */
-	{ NET_UNIX_MAX_DGRAM_QLEN,	"max_dgram_qlen" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv4_route_table[] = {
-	{ NET_IPV4_ROUTE_FLUSH,			"flush" },
-	{ NET_IPV4_ROUTE_MIN_DELAY,		"min_delay" },
-	{ NET_IPV4_ROUTE_MAX_DELAY,		"max_delay" },
-	{ NET_IPV4_ROUTE_GC_THRESH,		"gc_thresh" },
-	{ NET_IPV4_ROUTE_MAX_SIZE,		"max_size" },
-	{ NET_IPV4_ROUTE_GC_MIN_INTERVAL,	"gc_min_interval" },
-	{ NET_IPV4_ROUTE_GC_TIMEOUT,		"gc_timeout" },
-	{ NET_IPV4_ROUTE_GC_INTERVAL,		"gc_interval" },
-	{ NET_IPV4_ROUTE_REDIRECT_LOAD,		"redirect_load" },
-	{ NET_IPV4_ROUTE_REDIRECT_NUMBER,	"redirect_number" },
-	{ NET_IPV4_ROUTE_REDIRECT_SILENCE,	"redirect_silence" },
-	{ NET_IPV4_ROUTE_ERROR_COST,		"error_cost" },
-	{ NET_IPV4_ROUTE_ERROR_BURST,		"error_burst" },
-	{ NET_IPV4_ROUTE_GC_ELASTICITY,		"gc_elasticity" },
-	{ NET_IPV4_ROUTE_MTU_EXPIRES,		"mtu_expires" },
-	{ NET_IPV4_ROUTE_MIN_PMTU,		"min_pmtu" },
-	{ NET_IPV4_ROUTE_MIN_ADVMSS,		"min_adv_mss" },
-	{ NET_IPV4_ROUTE_SECRET_INTERVAL,	"secret_interval" },
-	{ NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS,	"gc_min_interval_ms" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv4_conf_vars_table[] = {
-	{ NET_IPV4_CONF_FORWARDING,		"forwarding" },
-	{ NET_IPV4_CONF_MC_FORWARDING,		"mc_forwarding" },
-
-	{ NET_IPV4_CONF_PROXY_ARP,		"proxy_arp" },
-	{ NET_IPV4_CONF_ACCEPT_REDIRECTS,	"accept_redirects" },
-	{ NET_IPV4_CONF_SECURE_REDIRECTS,	"secure_redirects" },
-	{ NET_IPV4_CONF_SEND_REDIRECTS,		"send_redirects" },
-	{ NET_IPV4_CONF_SHARED_MEDIA,		"shared_media" },
-	{ NET_IPV4_CONF_RP_FILTER,		"rp_filter" },
-	{ NET_IPV4_CONF_ACCEPT_SOURCE_ROUTE,	"accept_source_route" },
-	{ NET_IPV4_CONF_BOOTP_RELAY,		"bootp_relay" },
-	{ NET_IPV4_CONF_LOG_MARTIANS,		"log_martians" },
-	{ NET_IPV4_CONF_TAG,			"tag" },
-	{ NET_IPV4_CONF_ARPFILTER,		"arp_filter" },
-	{ NET_IPV4_CONF_MEDIUM_ID,		"medium_id" },
-	{ NET_IPV4_CONF_NOXFRM,			"disable_xfrm" },
-	{ NET_IPV4_CONF_NOPOLICY,		"disable_policy" },
-	{ NET_IPV4_CONF_FORCE_IGMP_VERSION,	"force_igmp_version" },
-
-	{ NET_IPV4_CONF_ARP_ANNOUNCE,		"arp_announce" },
-	{ NET_IPV4_CONF_ARP_IGNORE,		"arp_ignore" },
-	{ NET_IPV4_CONF_PROMOTE_SECONDARIES,	"promote_secondaries" },
-	{ NET_IPV4_CONF_ARP_ACCEPT,		"arp_accept" },
-	{ NET_IPV4_CONF_ARP_NOTIFY,		"arp_notify" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv4_conf_table[] = {
-	{ NET_PROTO_CONF_ALL,		"all",		trans_net_ipv4_conf_vars_table },
-	{ NET_PROTO_CONF_DEFAULT,	"default",	trans_net_ipv4_conf_vars_table },
-	{ 0, NULL, trans_net_ipv4_conf_vars_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_neigh_vars_table[] = {
-	{ NET_NEIGH_MCAST_SOLICIT,	"mcast_solicit" },
-	{ NET_NEIGH_UCAST_SOLICIT,	"ucast_solicit" },
-	{ NET_NEIGH_APP_SOLICIT,	"app_solicit" },
-	{ NET_NEIGH_RETRANS_TIME,	"retrans_time" },
-	{ NET_NEIGH_REACHABLE_TIME,	"base_reachable_time" },
-	{ NET_NEIGH_DELAY_PROBE_TIME,	"delay_first_probe_time" },
-	{ NET_NEIGH_GC_STALE_TIME,	"gc_stale_time" },
-	{ NET_NEIGH_UNRES_QLEN,		"unres_qlen" },
-	{ NET_NEIGH_PROXY_QLEN,		"proxy_qlen" },
-	{ NET_NEIGH_ANYCAST_DELAY,	"anycast_delay" },
-	{ NET_NEIGH_PROXY_DELAY,	"proxy_delay" },
-	{ NET_NEIGH_LOCKTIME,		"locktime" },
-	{ NET_NEIGH_GC_INTERVAL,	"gc_interval" },
-	{ NET_NEIGH_GC_THRESH1,		"gc_thresh1" },
-	{ NET_NEIGH_GC_THRESH2,		"gc_thresh2" },
-	{ NET_NEIGH_GC_THRESH3,		"gc_thresh3" },
-	{ NET_NEIGH_RETRANS_TIME_MS,	"retrans_time_ms" },
-	{ NET_NEIGH_REACHABLE_TIME_MS,	"base_reachable_time_ms" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_neigh_table[] = {
-	{ NET_PROTO_CONF_DEFAULT, "default", trans_net_neigh_vars_table },
-	{ 0, NULL, trans_net_neigh_vars_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv4_netfilter_table[] = {
-	{ NET_IPV4_NF_CONNTRACK_MAX,				"ip_conntrack_max" },
-
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT,		"ip_conntrack_tcp_timeout_syn_sent" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV,		"ip_conntrack_tcp_timeout_syn_recv" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED,	"ip_conntrack_tcp_timeout_established" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT,		"ip_conntrack_tcp_timeout_fin_wait" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT,		"ip_conntrack_tcp_timeout_close_wait" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK,		"ip_conntrack_tcp_timeout_last_ack" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT,		"ip_conntrack_tcp_timeout_time_wait" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_CLOSE,		"ip_conntrack_tcp_timeout_close" },
-
-	{ NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT,			"ip_conntrack_udp_timeout" },
-	{ NET_IPV4_NF_CONNTRACK_UDP_TIMEOUT_STREAM,		"ip_conntrack_udp_timeout_stream" },
-	{ NET_IPV4_NF_CONNTRACK_ICMP_TIMEOUT,			"ip_conntrack_icmp_timeout" },
-	{ NET_IPV4_NF_CONNTRACK_GENERIC_TIMEOUT,		"ip_conntrack_generic_timeout" },
-
-	{ NET_IPV4_NF_CONNTRACK_BUCKETS,			"ip_conntrack_buckets" },
-	{ NET_IPV4_NF_CONNTRACK_LOG_INVALID,			"ip_conntrack_log_invalid" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS,	"ip_conntrack_tcp_timeout_max_retrans" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_LOOSE,			"ip_conntrack_tcp_loose" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL,			"ip_conntrack_tcp_be_liberal" },
-	{ NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS,		"ip_conntrack_tcp_max_retrans" },
-
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED,		"ip_conntrack_sctp_timeout_closed" },
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT,	"ip_conntrack_sctp_timeout_cookie_wait" },
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED,	"ip_conntrack_sctp_timeout_cookie_echoed" },
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED,	"ip_conntrack_sctp_timeout_established" },
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT,	"ip_conntrack_sctp_timeout_shutdown_sent" },
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD,	"ip_conntrack_sctp_timeout_shutdown_recd" },
-	{ NET_IPV4_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT,	"ip_conntrack_sctp_timeout_shutdown_ack_sent" },
-
-	{ NET_IPV4_NF_CONNTRACK_COUNT,		"ip_conntrack_count" },
-	{ NET_IPV4_NF_CONNTRACK_CHECKSUM,	"ip_conntrack_checksum" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv4_table[] = {
-	{ NET_IPV4_FORWARD,			"ip_forward" },
-	{ NET_IPV4_DYNADDR,			"ip_dynaddr" },
-
-	{ NET_IPV4_CONF,		"conf",		trans_net_ipv4_conf_table },
-	{ NET_IPV4_NEIGH,		"neigh",	trans_net_neigh_table },
-	{ NET_IPV4_ROUTE,		"route",	trans_net_ipv4_route_table },
-	/* NET_IPV4_FIB_HASH unused */
-	{ NET_IPV4_NETFILTER,		"netfilter",	trans_net_ipv4_netfilter_table },
-
-	{ NET_IPV4_TCP_TIMESTAMPS,		"tcp_timestamps" },
-	{ NET_IPV4_TCP_WINDOW_SCALING,		"tcp_window_scaling" },
-	{ NET_IPV4_TCP_SACK,			"tcp_sack" },
-	{ NET_IPV4_TCP_RETRANS_COLLAPSE,	"tcp_retrans_collapse" },
-	{ NET_IPV4_DEFAULT_TTL,			"ip_default_ttl" },
-	/* NET_IPV4_AUTOCONFIG unused */
-	{ NET_IPV4_NO_PMTU_DISC,		"ip_no_pmtu_disc" },
-	{ NET_IPV4_TCP_SYN_RETRIES,		"tcp_syn_retries" },
-	{ NET_IPV4_IPFRAG_HIGH_THRESH,		"ipfrag_high_thresh" },
-	{ NET_IPV4_IPFRAG_LOW_THRESH,		"ipfrag_low_thresh" },
-	{ NET_IPV4_IPFRAG_TIME,			"ipfrag_time" },
-	/* NET_IPV4_TCP_MAX_KA_PROBES unused */
-	{ NET_IPV4_TCP_KEEPALIVE_TIME,		"tcp_keepalive_time" },
-	{ NET_IPV4_TCP_KEEPALIVE_PROBES,	"tcp_keepalive_probes" },
-	{ NET_IPV4_TCP_RETRIES1,		"tcp_retries1" },
-	{ NET_IPV4_TCP_RETRIES2,		"tcp_retries2" },
-	{ NET_IPV4_TCP_FIN_TIMEOUT,		"tcp_fin_timeout" },
-	/* NET_IPV4_IP_MASQ_DEBUG unused */
-	{ NET_TCP_SYNCOOKIES,			"tcp_syncookies" },
-	{ NET_TCP_STDURG,			"tcp_stdurg" },
-	{ NET_TCP_RFC1337,			"tcp_rfc1337" },
-	/* NET_TCP_SYN_TAILDROP unused */
-	{ NET_TCP_MAX_SYN_BACKLOG,		"tcp_max_syn_backlog" },
-	{ NET_IPV4_LOCAL_PORT_RANGE,		"ip_local_port_range" },
-	{ NET_IPV4_ICMP_ECHO_IGNORE_ALL,	"icmp_echo_ignore_all" },
-	{ NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS,	"icmp_echo_ignore_broadcasts" },
-	/* NET_IPV4_ICMP_SOURCEQUENCH_RATE unused */
-	/* NET_IPV4_ICMP_DESTUNREACH_RATE unused */
-	/* NET_IPV4_ICMP_TIMEEXCEED_RATE unused */
-	/* NET_IPV4_ICMP_PARAMPROB_RATE unused */
-	/* NET_IPV4_ICMP_ECHOREPLY_RATE unused */
-	{ NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES,	"icmp_ignore_bogus_error_responses" },
-	{ NET_IPV4_IGMP_MAX_MEMBERSHIPS,	"igmp_max_memberships" },
-	{ NET_TCP_TW_RECYCLE,			"tcp_tw_recycle" },
-	/* NET_IPV4_ALWAYS_DEFRAG unused */
-	{ NET_IPV4_TCP_KEEPALIVE_INTVL,		"tcp_keepalive_intvl" },
-	{ NET_IPV4_INET_PEER_THRESHOLD,		"inet_peer_threshold" },
-	{ NET_IPV4_INET_PEER_MINTTL,		"inet_peer_minttl" },
-	{ NET_IPV4_INET_PEER_MAXTTL,		"inet_peer_maxttl" },
-	{ NET_IPV4_INET_PEER_GC_MINTIME,	"inet_peer_gc_mintime" },
-	{ NET_IPV4_INET_PEER_GC_MAXTIME,	"inet_peer_gc_maxtime" },
-	{ NET_TCP_ORPHAN_RETRIES,		"tcp_orphan_retries" },
-	{ NET_TCP_ABORT_ON_OVERFLOW,		"tcp_abort_on_overflow" },
-	{ NET_TCP_SYNACK_RETRIES,		"tcp_synack_retries" },
-	{ NET_TCP_MAX_ORPHANS,			"tcp_max_orphans" },
-	{ NET_TCP_MAX_TW_BUCKETS,		"tcp_max_tw_buckets" },
-	{ NET_TCP_FACK,				"tcp_fack" },
-	{ NET_TCP_REORDERING,			"tcp_reordering" },
-	{ NET_TCP_ECN,				"tcp_ecn" },
-	{ NET_TCP_DSACK,			"tcp_dsack" },
-	{ NET_TCP_MEM,				"tcp_mem" },
-	{ NET_TCP_WMEM,				"tcp_wmem" },
-	{ NET_TCP_RMEM,				"tcp_rmem" },
-	{ NET_TCP_APP_WIN,			"tcp_app_win" },
-	{ NET_TCP_ADV_WIN_SCALE,		"tcp_adv_win_scale" },
-	{ NET_IPV4_NONLOCAL_BIND,		"ip_nonlocal_bind" },
-	{ NET_IPV4_ICMP_RATELIMIT,		"icmp_ratelimit" },
-	{ NET_IPV4_ICMP_RATEMASK,		"icmp_ratemask" },
-	{ NET_TCP_TW_REUSE,			"tcp_tw_reuse" },
-	{ NET_TCP_FRTO,				"tcp_frto" },
-	{ NET_TCP_LOW_LATENCY,			"tcp_low_latency" },
-	{ NET_IPV4_IPFRAG_SECRET_INTERVAL,	"ipfrag_secret_interval" },
-	{ NET_IPV4_IGMP_MAX_MSF,		"igmp_max_msf" },
-	{ NET_TCP_NO_METRICS_SAVE,		"tcp_no_metrics_save" },
-	/* NET_TCP_DEFAULT_WIN_SCALE unused */
-	{ NET_TCP_MODERATE_RCVBUF,		"tcp_moderate_rcvbuf" },
-	{ NET_TCP_TSO_WIN_DIVISOR,		"tcp_tso_win_divisor" },
-	/* NET_TCP_BIC_BETA unused */
-	{ NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR,	"icmp_errors_use_inbound_ifaddr" },
-	{ NET_TCP_CONG_CONTROL,			"tcp_congestion_control" },
-	{ NET_TCP_ABC,				"tcp_abc" },
-	{ NET_IPV4_IPFRAG_MAX_DIST,		"ipfrag_max_dist" },
-	{ NET_TCP_MTU_PROBING,			"tcp_mtu_probing" },
-	{ NET_TCP_BASE_MSS,			"tcp_base_mss" },
-	{ NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS,	"tcp_workaround_signed_windows" },
-	{ NET_TCP_DMA_COPYBREAK,		"tcp_dma_copybreak" },
-	{ NET_TCP_SLOW_START_AFTER_IDLE,	"tcp_slow_start_after_idle" },
-	{ NET_CIPSOV4_CACHE_ENABLE,		"cipso_cache_enable" },
-	{ NET_CIPSOV4_CACHE_BUCKET_SIZE,	"cipso_cache_bucket_size" },
-	{ NET_CIPSOV4_RBM_OPTFMT,		"cipso_rbm_optfmt" },
-	{ NET_CIPSOV4_RBM_STRICTVALID,		"cipso_rbm_strictvalid" },
-	{ NET_TCP_AVAIL_CONG_CONTROL,		"tcp_available_congestion_control" },
-	{ NET_TCP_ALLOWED_CONG_CONTROL,		"tcp_allowed_congestion_control" },
-	{ NET_TCP_MAX_SSTHRESH,			"tcp_max_ssthresh" },
-	{ NET_TCP_FRTO_RESPONSE,		"tcp_frto_response" },
-	{ 2088 /* NET_IPQ_QMAX */,		"ip_queue_maxlen" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipx_table[] = {
-	{ NET_IPX_PPROP_BROADCASTING,	"ipx_pprop_broadcasting" },
-	/* NET_IPX_FORWARDING unused */
-	{}
-};
-
-static const struct trans_ctl_table trans_net_atalk_table[] = {
-	{ NET_ATALK_AARP_EXPIRY_TIME,		"aarp-expiry-time" },
-	{ NET_ATALK_AARP_TICK_TIME,		"aarp-tick-time" },
-	{ NET_ATALK_AARP_RETRANSMIT_LIMIT,	"aarp-retransmit-limit" },
-	{ NET_ATALK_AARP_RESOLVE_TIME,		"aarp-resolve-time" },
-	{},
-};
-
-static const struct trans_ctl_table trans_net_netrom_table[] = {
-	{ NET_NETROM_DEFAULT_PATH_QUALITY,		"default_path_quality" },
-	{ NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER,	"obsolescence_count_initialiser" },
-	{ NET_NETROM_NETWORK_TTL_INITIALISER,		"network_ttl_initialiser" },
-	{ NET_NETROM_TRANSPORT_TIMEOUT,			"transport_timeout" },
-	{ NET_NETROM_TRANSPORT_MAXIMUM_TRIES,		"transport_maximum_tries" },
-	{ NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY,	"transport_acknowledge_delay" },
-	{ NET_NETROM_TRANSPORT_BUSY_DELAY,		"transport_busy_delay" },
-	{ NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE,	"transport_requested_window_size" },
-	{ NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT,	"transport_no_activity_timeout" },
-	{ NET_NETROM_ROUTING_CONTROL,			"routing_control" },
-	{ NET_NETROM_LINK_FAILS_COUNT,			"link_fails_count" },
-	{ NET_NETROM_RESET,				"reset" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ax25_param_table[] = {
-	{ NET_AX25_IP_DEFAULT_MODE,	"ip_default_mode" },
-	{ NET_AX25_DEFAULT_MODE,	"ax25_default_mode" },
-	{ NET_AX25_BACKOFF_TYPE,	"backoff_type" },
-	{ NET_AX25_CONNECT_MODE,	"connect_mode" },
-	{ NET_AX25_STANDARD_WINDOW,	"standard_window_size" },
-	{ NET_AX25_EXTENDED_WINDOW,	"extended_window_size" },
-	{ NET_AX25_T1_TIMEOUT,		"t1_timeout" },
-	{ NET_AX25_T2_TIMEOUT,		"t2_timeout" },
-	{ NET_AX25_T3_TIMEOUT,		"t3_timeout" },
-	{ NET_AX25_IDLE_TIMEOUT,	"idle_timeout" },
-	{ NET_AX25_N2,			"maximum_retry_count" },
-	{ NET_AX25_PACLEN,		"maximum_packet_length" },
-	{ NET_AX25_PROTOCOL,		"protocol" },
-	{ NET_AX25_DAMA_SLAVE_TIMEOUT,	"dama_slave_timeout" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ax25_table[] = {
-	{ 0, NULL, trans_net_ax25_param_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_bridge_table[] = {
-	{ NET_BRIDGE_NF_CALL_ARPTABLES,		"bridge-nf-call-arptables" },
-	{ NET_BRIDGE_NF_CALL_IPTABLES,		"bridge-nf-call-iptables" },
-	{ NET_BRIDGE_NF_CALL_IP6TABLES,		"bridge-nf-call-ip6tables" },
-	{ NET_BRIDGE_NF_FILTER_VLAN_TAGGED,	"bridge-nf-filter-vlan-tagged" },
-	{ NET_BRIDGE_NF_FILTER_PPPOE_TAGGED,	"bridge-nf-filter-pppoe-tagged" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_rose_table[] = {
-	{ NET_ROSE_RESTART_REQUEST_TIMEOUT,	"restart_request_timeout" },
-	{ NET_ROSE_CALL_REQUEST_TIMEOUT,	"call_request_timeout" },
-	{ NET_ROSE_RESET_REQUEST_TIMEOUT,	"reset_request_timeout" },
-	{ NET_ROSE_CLEAR_REQUEST_TIMEOUT,	"clear_request_timeout" },
-	{ NET_ROSE_ACK_HOLD_BACK_TIMEOUT,	"acknowledge_hold_back_timeout" },
-	{ NET_ROSE_ROUTING_CONTROL,		"routing_control" },
-	{ NET_ROSE_LINK_FAIL_TIMEOUT,		"link_fail_timeout" },
-	{ NET_ROSE_MAX_VCS,			"maximum_virtual_circuits" },
-	{ NET_ROSE_WINDOW_SIZE,			"window_size" },
-	{ NET_ROSE_NO_ACTIVITY_TIMEOUT,		"no_activity_timeout" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv6_conf_var_table[] = {
-	{ NET_IPV6_FORWARDING,			"forwarding" },
-	{ NET_IPV6_HOP_LIMIT,			"hop_limit" },
-	{ NET_IPV6_MTU,				"mtu" },
-	{ NET_IPV6_ACCEPT_RA,			"accept_ra" },
-	{ NET_IPV6_ACCEPT_REDIRECTS,		"accept_redirects" },
-	{ NET_IPV6_AUTOCONF,			"autoconf" },
-	{ NET_IPV6_DAD_TRANSMITS,		"dad_transmits" },
-	{ NET_IPV6_RTR_SOLICITS,		"router_solicitations" },
-	{ NET_IPV6_RTR_SOLICIT_INTERVAL,	"router_solicitation_interval" },
-	{ NET_IPV6_RTR_SOLICIT_DELAY,		"router_solicitation_delay" },
-	{ NET_IPV6_USE_TEMPADDR,		"use_tempaddr" },
-	{ NET_IPV6_TEMP_VALID_LFT,		"temp_valid_lft" },
-	{ NET_IPV6_TEMP_PREFERED_LFT,		"temp_prefered_lft" },
-	{ NET_IPV6_REGEN_MAX_RETRY,		"regen_max_retry" },
-	{ NET_IPV6_MAX_DESYNC_FACTOR,		"max_desync_factor" },
-	{ NET_IPV6_MAX_ADDRESSES,		"max_addresses" },
-	{ NET_IPV6_FORCE_MLD_VERSION,		"force_mld_version" },
-	{ NET_IPV6_ACCEPT_RA_DEFRTR,		"accept_ra_defrtr" },
-	{ NET_IPV6_ACCEPT_RA_PINFO,		"accept_ra_pinfo" },
-	{ NET_IPV6_ACCEPT_RA_RTR_PREF,		"accept_ra_rtr_pref" },
-	{ NET_IPV6_RTR_PROBE_INTERVAL,		"router_probe_interval" },
-	{ NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN,	"accept_ra_rt_info_max_plen" },
-	{ NET_IPV6_PROXY_NDP,			"proxy_ndp" },
-	{ NET_IPV6_ACCEPT_SOURCE_ROUTE,		"accept_source_route" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv6_conf_table[] = {
-	{ NET_PROTO_CONF_ALL,		"all",	trans_net_ipv6_conf_var_table },
-	{ NET_PROTO_CONF_DEFAULT, 	"default", trans_net_ipv6_conf_var_table },
-	{ 0, NULL, trans_net_ipv6_conf_var_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv6_route_table[] = {
-	{ NET_IPV6_ROUTE_FLUSH,			"flush" },
-	{ NET_IPV6_ROUTE_GC_THRESH,		"gc_thresh" },
-	{ NET_IPV6_ROUTE_MAX_SIZE,		"max_size" },
-	{ NET_IPV6_ROUTE_GC_MIN_INTERVAL,	"gc_min_interval" },
-	{ NET_IPV6_ROUTE_GC_TIMEOUT,		"gc_timeout" },
-	{ NET_IPV6_ROUTE_GC_INTERVAL,		"gc_interval" },
-	{ NET_IPV6_ROUTE_GC_ELASTICITY,		"gc_elasticity" },
-	{ NET_IPV6_ROUTE_MTU_EXPIRES,		"mtu_expires" },
-	{ NET_IPV6_ROUTE_MIN_ADVMSS,		"min_adv_mss" },
-	{ NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS,	"gc_min_interval_ms" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv6_icmp_table[] = {
-	{ NET_IPV6_ICMP_RATELIMIT,	"ratelimit" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_ipv6_table[] = {
-	{ NET_IPV6_CONF,		"conf",		trans_net_ipv6_conf_table },
-	{ NET_IPV6_NEIGH,		"neigh",	trans_net_neigh_table },
-	{ NET_IPV6_ROUTE,		"route",	trans_net_ipv6_route_table },
-	{ NET_IPV6_ICMP,		"icmp",		trans_net_ipv6_icmp_table },
-	{ NET_IPV6_BINDV6ONLY,		"bindv6only" },
-	{ NET_IPV6_IP6FRAG_HIGH_THRESH,	"ip6frag_high_thresh" },
-	{ NET_IPV6_IP6FRAG_LOW_THRESH,	"ip6frag_low_thresh" },
-	{ NET_IPV6_IP6FRAG_TIME,	"ip6frag_time" },
-	{ NET_IPV6_IP6FRAG_SECRET_INTERVAL,	"ip6frag_secret_interval" },
-	{ NET_IPV6_MLD_MAX_MSF,		"mld_max_msf" },
-	{ 2088 /* IPQ_QMAX */,		"ip6_queue_maxlen" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_x25_table[] = {
-	{ NET_X25_RESTART_REQUEST_TIMEOUT,	"restart_request_timeout" },
-	{ NET_X25_CALL_REQUEST_TIMEOUT,		"call_request_timeout" },
-	{ NET_X25_RESET_REQUEST_TIMEOUT,	"reset_request_timeout" },
-	{ NET_X25_CLEAR_REQUEST_TIMEOUT,	"clear_request_timeout" },
-	{ NET_X25_ACK_HOLD_BACK_TIMEOUT,	"acknowledgement_hold_back_timeout" },
-	{ NET_X25_FORWARD,			"x25_forward" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_tr_table[] = {
-	{ NET_TR_RIF_TIMEOUT,	"rif_timeout" },
-	{}
-};
-
-
-static const struct trans_ctl_table trans_net_decnet_conf_vars[] = {
-	{ NET_DECNET_CONF_DEV_FORWARDING,	"forwarding" },
-	{ NET_DECNET_CONF_DEV_PRIORITY,		"priority" },
-	{ NET_DECNET_CONF_DEV_T2,		"t2" },
-	{ NET_DECNET_CONF_DEV_T3,		"t3" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_decnet_conf[] = {
-	{ 0, NULL, trans_net_decnet_conf_vars },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_decnet_table[] = {
-	{ NET_DECNET_CONF,		"conf",	trans_net_decnet_conf },
-	{ NET_DECNET_NODE_ADDRESS,	"node_address" },
-	{ NET_DECNET_NODE_NAME,		"node_name" },
-	{ NET_DECNET_DEFAULT_DEVICE,	"default_device" },
-	{ NET_DECNET_TIME_WAIT,		"time_wait" },
-	{ NET_DECNET_DN_COUNT,		"dn_count" },
-	{ NET_DECNET_DI_COUNT,		"di_count" },
-	{ NET_DECNET_DR_COUNT,		"dr_count" },
-	{ NET_DECNET_DST_GC_INTERVAL,	"dst_gc_interval" },
-	{ NET_DECNET_NO_FC_MAX_CWND,	"no_fc_max_cwnd" },
-	{ NET_DECNET_MEM,		"decnet_mem" },
-	{ NET_DECNET_RMEM,		"decnet_rmem" },
-	{ NET_DECNET_WMEM,		"decnet_wmem" },
-	{ NET_DECNET_DEBUG_LEVEL,	"debug" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_sctp_table[] = {
-	{ NET_SCTP_RTO_INITIAL,		"rto_initial" },
-	{ NET_SCTP_RTO_MIN,		"rto_min" },
-	{ NET_SCTP_RTO_MAX,		"rto_max" },
-	{ NET_SCTP_RTO_ALPHA,		"rto_alpha_exp_divisor" },
-	{ NET_SCTP_RTO_BETA,		"rto_beta_exp_divisor" },
-	{ NET_SCTP_VALID_COOKIE_LIFE,	"valid_cookie_life" },
-	{ NET_SCTP_ASSOCIATION_MAX_RETRANS,	"association_max_retrans" },
-	{ NET_SCTP_PATH_MAX_RETRANS,	"path_max_retrans" },
-	{ NET_SCTP_MAX_INIT_RETRANSMITS,	"max_init_retransmits" },
-	{ NET_SCTP_HB_INTERVAL,		"hb_interval" },
-	{ NET_SCTP_PRESERVE_ENABLE,	"cookie_preserve_enable" },
-	{ NET_SCTP_MAX_BURST,		"max_burst" },
-	{ NET_SCTP_ADDIP_ENABLE,	"addip_enable" },
-	{ NET_SCTP_PRSCTP_ENABLE,	"prsctp_enable" },
-	{ NET_SCTP_SNDBUF_POLICY,	"sndbuf_policy" },
-	{ NET_SCTP_SACK_TIMEOUT,	"sack_timeout" },
-	{ NET_SCTP_RCVBUF_POLICY,	"rcvbuf_policy" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_llc_llc2_timeout_table[] = {
-	{ NET_LLC2_ACK_TIMEOUT,		"ack" },
-	{ NET_LLC2_P_TIMEOUT,		"p" },
-	{ NET_LLC2_REJ_TIMEOUT,		"rej" },
-	{ NET_LLC2_BUSY_TIMEOUT,	"busy" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_llc_station_table[] = {
-	{ NET_LLC_STATION_ACK_TIMEOUT,	"ack_timeout" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_llc_llc2_table[] = {
-	{ NET_LLC2,		"timeout",	trans_net_llc_llc2_timeout_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_llc_table[] = {
-	{ NET_LLC2,		"llc2",		trans_net_llc_llc2_table },
-	{ NET_LLC_STATION,	"station",	trans_net_llc_station_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_netfilter_table[] = {
-	{ NET_NF_CONNTRACK_MAX,				"nf_conntrack_max" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_SENT,	"nf_conntrack_tcp_timeout_syn_sent" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_SYN_RECV,	"nf_conntrack_tcp_timeout_syn_recv" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_ESTABLISHED,	"nf_conntrack_tcp_timeout_established" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_FIN_WAIT,	"nf_conntrack_tcp_timeout_fin_wait" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE_WAIT,	"nf_conntrack_tcp_timeout_close_wait" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_LAST_ACK,	"nf_conntrack_tcp_timeout_last_ack" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_TIME_WAIT,	"nf_conntrack_tcp_timeout_time_wait" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_CLOSE,		"nf_conntrack_tcp_timeout_close" },
-	{ NET_NF_CONNTRACK_UDP_TIMEOUT,			"nf_conntrack_udp_timeout" },
-	{ NET_NF_CONNTRACK_UDP_TIMEOUT_STREAM,		"nf_conntrack_udp_timeout_stream" },
-	{ NET_NF_CONNTRACK_ICMP_TIMEOUT,	"nf_conntrack_icmp_timeout" },
-	{ NET_NF_CONNTRACK_GENERIC_TIMEOUT,		"nf_conntrack_generic_timeout" },
-	{ NET_NF_CONNTRACK_BUCKETS,			"nf_conntrack_buckets" },
-	{ NET_NF_CONNTRACK_LOG_INVALID,			"nf_conntrack_log_invalid" },
-	{ NET_NF_CONNTRACK_TCP_TIMEOUT_MAX_RETRANS,	"nf_conntrack_tcp_timeout_max_retrans" },
-	{ NET_NF_CONNTRACK_TCP_LOOSE,			"nf_conntrack_tcp_loose" },
-	{ NET_NF_CONNTRACK_TCP_BE_LIBERAL,		"nf_conntrack_tcp_be_liberal" },
-	{ NET_NF_CONNTRACK_TCP_MAX_RETRANS,		"nf_conntrack_tcp_max_retrans" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_CLOSED,		"nf_conntrack_sctp_timeout_closed" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_WAIT,	"nf_conntrack_sctp_timeout_cookie_wait" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_COOKIE_ECHOED,	"nf_conntrack_sctp_timeout_cookie_echoed" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_ESTABLISHED,	"nf_conntrack_sctp_timeout_established" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_SENT,	"nf_conntrack_sctp_timeout_shutdown_sent" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_RECD,	"nf_conntrack_sctp_timeout_shutdown_recd" },
-	{ NET_NF_CONNTRACK_SCTP_TIMEOUT_SHUTDOWN_ACK_SENT,	"nf_conntrack_sctp_timeout_shutdown_ack_sent" },
-	{ NET_NF_CONNTRACK_COUNT,			"nf_conntrack_count" },
-	{ NET_NF_CONNTRACK_ICMPV6_TIMEOUT,	"nf_conntrack_icmpv6_timeout" },
-	{ NET_NF_CONNTRACK_FRAG6_TIMEOUT,		"nf_conntrack_frag6_timeout" },
-	{ NET_NF_CONNTRACK_FRAG6_LOW_THRESH,		"nf_conntrack_frag6_low_thresh" },
-	{ NET_NF_CONNTRACK_FRAG6_HIGH_THRESH,		"nf_conntrack_frag6_high_thresh" },
-	{ NET_NF_CONNTRACK_CHECKSUM,			"nf_conntrack_checksum" },
-
-	{}
-};
-
-static const struct trans_ctl_table trans_net_dccp_table[] = {
-	{ NET_DCCP_DEFAULT,	"default" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_irda_table[] = {
-	{ NET_IRDA_DISCOVERY,		"discovery" },
-	{ NET_IRDA_DEVNAME,		"devname" },
-	{ NET_IRDA_DEBUG,		"debug" },
-	{ NET_IRDA_FAST_POLL,		"fast_poll_increase" },
-	{ NET_IRDA_DISCOVERY_SLOTS,	"discovery_slots" },
-	{ NET_IRDA_DISCOVERY_TIMEOUT,	"discovery_timeout" },
-	{ NET_IRDA_SLOT_TIMEOUT,	"slot_timeout" },
-	{ NET_IRDA_MAX_BAUD_RATE,	"max_baud_rate" },
-	{ NET_IRDA_MIN_TX_TURN_TIME,	"min_tx_turn_time" },
-	{ NET_IRDA_MAX_TX_DATA_SIZE,	"max_tx_data_size" },
-	{ NET_IRDA_MAX_TX_WINDOW,	"max_tx_window" },
-	{ NET_IRDA_MAX_NOREPLY_TIME,	"max_noreply_time" },
-	{ NET_IRDA_WARN_NOREPLY_TIME,	"warn_noreply_time" },
-	{ NET_IRDA_LAP_KEEPALIVE_TIME,	"lap_keepalive_time" },
-	{}
-};
-
-static const struct trans_ctl_table trans_net_table[] = {
-	{ NET_CORE,		"core",		trans_net_core_table },
-	/* NET_ETHER not used */
-	/* NET_802 not used */
-	{ NET_UNIX,		"unix",		trans_net_unix_table },
-	{ NET_IPV4,		"ipv4",		trans_net_ipv4_table },
-	{ NET_IPX,		"ipx",		trans_net_ipx_table },
-	{ NET_ATALK,		"appletalk",	trans_net_atalk_table },
-	{ NET_NETROM,		"netrom",	trans_net_netrom_table },
-	{ NET_AX25,		"ax25",		trans_net_ax25_table },
-	{ NET_BRIDGE,		"bridge",	trans_net_bridge_table },
-	{ NET_ROSE,		"rose",		trans_net_rose_table },
-	{ NET_IPV6,		"ipv6",		trans_net_ipv6_table },
-	{ NET_X25,		"x25",		trans_net_x25_table },
-	{ NET_TR,		"token-ring",	trans_net_tr_table },
-	{ NET_DECNET,		"decnet",	trans_net_decnet_table },
-	/*  NET_ECONET not used */
-	{ NET_SCTP,		"sctp",		trans_net_sctp_table },
-	{ NET_LLC,		"llc",		trans_net_llc_table },
-	{ NET_NETFILTER,	"netfilter",	trans_net_netfilter_table },
-	{ NET_DCCP,		"dccp",		trans_net_dccp_table },
-	{ NET_IRDA,		"irda",		trans_net_irda_table },
-	{ 2089,			"nf_conntrack_max" },
-	{}
-};
-
-static const struct trans_ctl_table trans_fs_quota_table[] = {
-	{ FS_DQ_LOOKUPS,	"lookups" },
-	{ FS_DQ_DROPS,		"drops" },
-	{ FS_DQ_READS,		"reads" },
-	{ FS_DQ_WRITES,		"writes" },
-	{ FS_DQ_CACHE_HITS,	"cache_hits" },
-	{ FS_DQ_ALLOCATED,	"allocated_dquots" },
-	{ FS_DQ_FREE,		"free_dquots" },
-	{ FS_DQ_SYNCS,		"syncs" },
-	{ FS_DQ_WARNINGS,	"warnings" },
-	{}
-};
-
-static const struct trans_ctl_table trans_fs_xfs_table[] = {
-	{ XFS_SGID_INHERIT,	"irix_sgid_inherit" },
-	{ XFS_SYMLINK_MODE,	"irix_symlink_mode" },
-	{ XFS_PANIC_MASK,	"panic_mask" },
-
-	{ XFS_ERRLEVEL,		"error_level" },
-	{ XFS_SYNCD_TIMER,	"xfssyncd_centisecs" },
-	{ XFS_INHERIT_SYNC,	"inherit_sync" },
-	{ XFS_INHERIT_NODUMP,	"inherit_nodump" },
-	{ XFS_INHERIT_NOATIME,	"inherit_noatime" },
-	{ XFS_BUF_TIMER,	"xfsbufd_centisecs" },
-	{ XFS_BUF_AGE,		"age_buffer_centisecs" },
-	{ XFS_INHERIT_NOSYM,	"inherit_nosymlinks" },
-	{ XFS_ROTORSTEP,	"rotorstep" },
-	{ XFS_INHERIT_NODFRG,	"inherit_nodefrag" },
-	{ XFS_FILESTREAM_TIMER,	"filestream_centisecs" },
-	{ XFS_STATS_CLEAR,	"stats_clear" },
-	{}
-};
-
-static const struct trans_ctl_table trans_fs_ocfs2_nm_table[] = {
-	{ 1, "hb_ctl_path" },
-	{}
-};
-
-static const struct trans_ctl_table trans_fs_ocfs2_table[] = {
-	{ 1,	"nm",	trans_fs_ocfs2_nm_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_inotify_table[] = {
-	{ INOTIFY_MAX_USER_INSTANCES,	"max_user_instances" },
-	{ INOTIFY_MAX_USER_WATCHES,	"max_user_watches" },
-	{ INOTIFY_MAX_QUEUED_EVENTS,	"max_queued_events" },
-	{}
-};
-
-static const struct trans_ctl_table trans_fs_table[] = {
-	{ FS_NRINODE,		"inode-nr" },
-	{ FS_STATINODE,		"inode-state" },
-	/* FS_MAXINODE unused */
-	/* FS_NRDQUOT unused */
-	/* FS_MAXDQUOT unused */
-	{ FS_NRFILE,		"file-nr" },
-	{ FS_MAXFILE,		"file-max" },
-	{ FS_DENTRY,		"dentry-state" },
-	/* FS_NRSUPER unused */
-	/* FS_MAXUPSER unused */
-	{ FS_OVERFLOWUID,	"overflowuid" },
-	{ FS_OVERFLOWGID,	"overflowgid" },
-	{ FS_LEASES,		"leases-enable" },
-	{ FS_DIR_NOTIFY,	"dir-notify-enable" },
-	{ FS_LEASE_TIME,	"lease-break-time" },
-	{ FS_DQSTATS,		"quota",		trans_fs_quota_table },
-	{ FS_XFS,		"xfs",			trans_fs_xfs_table },
-	{ FS_AIO_NR,		"aio-nr" },
-	{ FS_AIO_MAX_NR,	"aio-max-nr" },
-	{ FS_INOTIFY,		"inotify",		trans_inotify_table },
-	{ FS_OCFS2,		"ocfs2",		trans_fs_ocfs2_table },
-	{ KERN_SETUID_DUMPABLE,	"suid_dumpable" },
-	{}
-};
-
-static const struct trans_ctl_table trans_debug_table[] = {
-	{}
-};
-
-static const struct trans_ctl_table trans_cdrom_table[] = {
-	{ DEV_CDROM_INFO,		"info" },
-	{ DEV_CDROM_AUTOCLOSE,		"autoclose" },
-	{ DEV_CDROM_AUTOEJECT,		"autoeject" },
-	{ DEV_CDROM_DEBUG,		"debug" },
-	{ DEV_CDROM_LOCK,		"lock" },
-	{ DEV_CDROM_CHECK_MEDIA,	"check_media" },
-	{}
-};
-
-static const struct trans_ctl_table trans_ipmi_table[] = {
-	{ DEV_IPMI_POWEROFF_POWERCYCLE,	"poweroff_powercycle" },
-	{}
-};
-
-static const struct trans_ctl_table trans_mac_hid_files[] = {
-	/* DEV_MAC_HID_KEYBOARD_SENDS_LINUX_KEYCODES unused */
-	/* DEV_MAC_HID_KEYBOARD_LOCK_KEYCODES unused */
-	{ DEV_MAC_HID_MOUSE_BUTTON_EMULATION,	"mouse_button_emulation" },
-	{ DEV_MAC_HID_MOUSE_BUTTON2_KEYCODE,	"mouse_button2_keycode" },
-	{ DEV_MAC_HID_MOUSE_BUTTON3_KEYCODE,	"mouse_button3_keycode" },
-	/* DEV_MAC_HID_ADB_MOUSE_SENDS_KEYCODES unused */
-	{}
-};
-
-static const struct trans_ctl_table trans_raid_table[] = {
-	{ DEV_RAID_SPEED_LIMIT_MIN,	"speed_limit_min" },
-	{ DEV_RAID_SPEED_LIMIT_MAX,	"speed_limit_max" },
-	{}
-};
-
-static const struct trans_ctl_table trans_scsi_table[] = {
-	{ DEV_SCSI_LOGGING_LEVEL, "logging_level" },
-	{}
-};
-
-static const struct trans_ctl_table trans_parport_default_table[] = {
-	{ DEV_PARPORT_DEFAULT_TIMESLICE,	"timeslice" },
-	{ DEV_PARPORT_DEFAULT_SPINTIME,		"spintime" },
-	{}
-};
-
-static const struct trans_ctl_table trans_parport_device_table[] = {
-	{ DEV_PARPORT_DEVICE_TIMESLICE,		"timeslice" },
-	{}
-};
-
-static const struct trans_ctl_table trans_parport_devices_table[] = {
-	{ DEV_PARPORT_DEVICES_ACTIVE,		"active" },
-	{ 0, NULL, trans_parport_device_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_parport_parport_table[] = {
-	{ DEV_PARPORT_SPINTIME,		"spintime" },
-	{ DEV_PARPORT_BASE_ADDR,	"base-addr" },
-	{ DEV_PARPORT_IRQ,		"irq" },
-	{ DEV_PARPORT_DMA,		"dma" },
-	{ DEV_PARPORT_MODES,		"modes" },
-	{ DEV_PARPORT_DEVICES,		"devices",	trans_parport_devices_table },
-	{ DEV_PARPORT_AUTOPROBE,	"autoprobe" },
-	{ DEV_PARPORT_AUTOPROBE + 1,	"autoprobe0" },
-	{ DEV_PARPORT_AUTOPROBE + 2,	"autoprobe1" },
-	{ DEV_PARPORT_AUTOPROBE + 3,	"autoprobe2" },
-	{ DEV_PARPORT_AUTOPROBE + 4,	"autoprobe3" },
-	{}
-};
-static const struct trans_ctl_table trans_parport_table[] = {
-	{ DEV_PARPORT_DEFAULT,	"default",	trans_parport_default_table },
-	{ 0, NULL, trans_parport_parport_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_dev_table[] = {
-	{ DEV_CDROM,	"cdrom",	trans_cdrom_table },
-	/* DEV_HWMON unused */
-	{ DEV_PARPORT,	"parport",	trans_parport_table },
-	{ DEV_RAID,	"raid",		trans_raid_table },
-	{ DEV_MAC_HID,	"mac_hid",	trans_mac_hid_files },
-	{ DEV_SCSI,	"scsi",		trans_scsi_table },
-	{ DEV_IPMI,	"ipmi",		trans_ipmi_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_bus_isa_table[] = {
-	{ BUS_ISA_MEM_BASE,	"membase" },
-	{ BUS_ISA_PORT_BASE,	"portbase" },
-	{ BUS_ISA_PORT_SHIFT,	"portshift" },
-	{}
-};
-
-static const struct trans_ctl_table trans_bus_table[] = {
-	{ CTL_BUS_ISA,	"isa",	trans_bus_isa_table },
-	{}
-};
-
-static const struct trans_ctl_table trans_arlan_conf_table0[] = {
-	{ 1,	"spreadingCode" },
-	{ 2,	"channelNumber" },
-	{ 3,	"scramblingDisable" },
-	{ 4,	"txAttenuation" },
-	{ 5,	"systemId" },
-	{ 6,	"maxDatagramSize" },
-	{ 7,	"maxFrameSize" },
-	{ 8,	"maxRetries" },
-	{ 9,	"receiveMode" },
-	{ 10,	"priority" },
-	{ 11,	"rootOrRepeater" },
-	{ 12,	"SID" },
-	{ 13,	"registrationMode" },
-	{ 14,	"registrationFill" },
-	{ 15,	"localTalkAddress" },
-	{ 16,	"codeFormat" },
-	{ 17,	"numChannels" },
-	{ 18,	"channel1" },
-	{ 19,	"channel2" },
-	{ 20,	"channel3" },
-	{ 21,	"channel4" },
-	{ 22,	"txClear" },
-	{ 23,	"txRetries" },
-	{ 24,	"txRouting" },
-	{ 25,	"txScrambled" },
-	{ 26,	"rxParameter" },
-	{ 27,	"txTimeoutMs" },
-	{ 28,	"waitCardTimeout" },
-	{ 29,	"channelSet" },
-	{ 30,	"name" },
-	{ 31,	"waitTime" },
-	{ 32,	"lParameter" },
-	{ 33,	"_15" },
-	{ 34,	"headerSize" },
-	{ 36,	"tx_delay_ms" },
-	{ 37,	"retries" },
-	{ 38,	"ReTransmitPacketMaxSize" },
-	{ 39,	"waitReTransmitPacketMaxSize" },
-	{ 40,	"fastReTransCount" },
-	{ 41,	"driverRetransmissions" },
-	{ 42,	"txAckTimeoutMs" },
-	{ 43,	"registrationInterrupts" },
-	{ 44,	"hardwareType" },
-	{ 45,	"radioType" },
-	{ 46,	"writeEEPROM" },
-	{ 47,	"writeRadioType" },
-	{ 48,	"entry_exit_debug" },
-	{ 49,	"debug" },
-	{ 50,	"in_speed" },
-	{ 51,	"out_speed" },
-	{ 52,	"in_speed10" },
-	{ 53,	"out_speed10" },
-	{ 54,	"in_speed_max" },
-	{ 55,	"out_speed_max" },
-	{ 56,	"measure_rate" },
-	{ 57,	"pre_Command_Wait" },
-	{ 58,	"rx_tweak1" },
-	{ 59,	"rx_tweak2" },
-	{ 60,	"tx_queue_len" },
-
-	{ 150,	"arlan0-txRing" },
-	{ 151,	"arlan0-rxRing" },
-	{ 152,	"arlan0-18" },
-	{ 153,	"arlan0-ring" },
-	{ 154,	"arlan0-shm-cpy" },
-	{ 155,	"config0" },
-	{ 156,	"reset0" },
-	{}
-};
-
-static const struct trans_ctl_table trans_arlan_conf_table1[] = {
-	{ 1,	"spreadingCode" },
-	{ 2,	"channelNumber" },
-	{ 3,	"scramblingDisable" },
-	{ 4,	"txAttenuation" },
-	{ 5,	"systemId" },
-	{ 6,	"maxDatagramSize" },
-	{ 7,	"maxFrameSize" },
-	{ 8,	"maxRetries" },
-	{ 9,	"receiveMode" },
-	{ 10,	"priority" },
-	{ 11,	"rootOrRepeater" },
-	{ 12,	"SID" },
-	{ 13,	"registrationMode" },
-	{ 14,	"registrationFill" },
-	{ 15,	"localTalkAddress" },
-	{ 16,	"codeFormat" },
-	{ 17,	"numChannels" },
-	{ 18,	"channel1" },
-	{ 19,	"channel2" },
-	{ 20,	"channel3" },
-	{ 21,	"channel4" },
-	{ 22,	"txClear" },
-	{ 23,	"txRetries" },
-	{ 24,	"txRouting" },
-	{ 25,	"txScrambled" },
-	{ 26,	"rxParameter" },
-	{ 27,	"txTimeoutMs" },
-	{ 28,	"waitCardTimeout" },
-	{ 29,	"channelSet" },
-	{ 30,	"name" },
-	{ 31,	"waitTime" },
-	{ 32,	"lParameter" },
-	{ 33,	"_15" },
-	{ 34,	"headerSize" },
-	{ 36,	"tx_delay_ms" },
-	{ 37,	"retries" },
-	{ 38,	"ReTransmitPacketMaxSize" },
-	{ 39,	"waitReTransmitPacketMaxSize" },
-	{ 40,	"fastReTransCount" },
-	{ 41,	"driverRetransmissions" },
-	{ 42,	"txAckTimeoutMs" },
-	{ 43,	"registrationInterrupts" },
-	{ 44,	"hardwareType" },
-	{ 45,	"radioType" },
-	{ 46,	"writeEEPROM" },
-	{ 47,	"writeRadioType" },
-	{ 48,	"entry_exit_debug" },
-	{ 49,	"debug" },
-	{ 50,	"in_speed" },
-	{ 51,	"out_speed" },
-	{ 52,	"in_speed10" },
-	{ 53,	"out_speed10" },
-	{ 54,	"in_speed_max" },
-	{ 55,	"out_speed_max" },
-	{ 56,	"measure_rate" },
-	{ 57,	"pre_Command_Wait" },
-	{ 58,	"rx_tweak1" },
-	{ 59,	"rx_tweak2" },
-	{ 60,	"tx_queue_len" },
-
-	{ 150,	"arlan1-txRing" },
-	{ 151,	"arlan1-rxRing" },
-	{ 152,	"arlan1-18" },
-	{ 153,	"arlan1-ring" },
-	{ 154,	"arlan1-shm-cpy" },
-	{ 155,	"config1" },
-	{ 156,	"reset1" },
-	{}
-};
-
-static const struct trans_ctl_table trans_arlan_conf_table2[] = {
-	{ 1,	"spreadingCode" },
-	{ 2,	"channelNumber" },
-	{ 3,	"scramblingDisable" },
-	{ 4,	"txAttenuation" },
-	{ 5,	"systemId" },
-	{ 6,	"maxDatagramSize" },
-	{ 7,	"maxFrameSize" },
-	{ 8,	"maxRetries" },
-	{ 9,	"receiveMode" },
-	{ 10,	"priority" },
-	{ 11,	"rootOrRepeater" },
-	{ 12,	"SID" },
-	{ 13,	"registrationMode" },
-	{ 14,	"registrationFill" },
-	{ 15,	"localTalkAddress" },
-	{ 16,	"codeFormat" },
-	{ 17,	"numChannels" },
-	{ 18,	"channel1" },
-	{ 19,	"channel2" },
-	{ 20,	"channel3" },
-	{ 21,	"channel4" },
-	{ 22,	"txClear" },
-	{ 23,	"txRetries" },
-	{ 24,	"txRouting" },
-	{ 25,	"txScrambled" },
-	{ 26,	"rxParameter" },
-	{ 27,	"txTimeoutMs" },
-	{ 28,	"waitCardTimeout" },
-	{ 29,	"channelSet" },
-	{ 30,	"name" },
-	{ 31,	"waitTime" },
-	{ 32,	"lParameter" },
-	{ 33,	"_15" },
-	{ 34,	"headerSize" },
-	{ 36,	"tx_delay_ms" },
-	{ 37,	"retries" },
-	{ 38,	"ReTransmitPacketMaxSize" },
-	{ 39,	"waitReTransmitPacketMaxSize" },
-	{ 40,	"fastReTransCount" },
-	{ 41,	"driverRetransmissions" },
-	{ 42,	"txAckTimeoutMs" },
-	{ 43,	"registrationInterrupts" },
-	{ 44,	"hardwareType" },
-	{ 45,	"radioType" },
-	{ 46,	"writeEEPROM" },
-	{ 47,	"writeRadioType" },
-	{ 48,	"entry_exit_debug" },
-	{ 49,	"debug" },
-	{ 50,	"in_speed" },
-	{ 51,	"out_speed" },
-	{ 52,	"in_speed10" },
-	{ 53,	"out_speed10" },
-	{ 54,	"in_speed_max" },
-	{ 55,	"out_speed_max" },
-	{ 56,	"measure_rate" },
-	{ 57,	"pre_Command_Wait" },
-	{ 58,	"rx_tweak1" },
-	{ 59,	"rx_tweak2" },
-	{ 60,	"tx_queue_len" },
-
-	{ 150,	"arlan2-txRing" },
-	{ 151,	"arlan2-rxRing" },
-	{ 152,	"arlan2-18" },
-	{ 153,	"arlan2-ring" },
-	{ 154,	"arlan2-shm-cpy" },
-	{ 155,	"config2" },
-	{ 156,	"reset2" },
-	{}
-};
-
-static const struct trans_ctl_table trans_arlan_conf_table3[] = {
-	{ 1,	"spreadingCode" },
-	{ 2,	"channelNumber" },
-	{ 3,	"scramblingDisable" },
-	{ 4,	"txAttenuation" },
-	{ 5,	"systemId" },
-	{ 6,	"maxDatagramSize" },
-	{ 7,	"maxFrameSize" },
-	{ 8,	"maxRetries" },
-	{ 9,	"receiveMode" },
-	{ 10,	"priority" },
-	{ 11,	"rootOrRepeater" },
-	{ 12,	"SID" },
-	{ 13,	"registrationMode" },
-	{ 14,	"registrationFill" },
-	{ 15,	"localTalkAddress" },
-	{ 16,	"codeFormat" },
-	{ 17,	"numChannels" },
-	{ 18,	"channel1" },
-	{ 19,	"channel2" },
-	{ 20,	"channel3" },
-	{ 21,	"channel4" },
-	{ 22,	"txClear" },
-	{ 23,	"txRetries" },
-	{ 24,	"txRouting" },
-	{ 25,	"txScrambled" },
-	{ 26,	"rxParameter" },
-	{ 27,	"txTimeoutMs" },
-	{ 28,	"waitCardTimeout" },
-	{ 29,	"channelSet" },
-	{ 30,	"name" },
-	{ 31,	"waitTime" },
-	{ 32,	"lParameter" },
-	{ 33,	"_15" },
-	{ 34,	"headerSize" },
-	{ 36,	"tx_delay_ms" },
-	{ 37,	"retries" },
-	{ 38,	"ReTransmitPacketMaxSize" },
-	{ 39,	"waitReTransmitPacketMaxSize" },
-	{ 40,	"fastReTransCount" },
-	{ 41,	"driverRetransmissions" },
-	{ 42,	"txAckTimeoutMs" },
-	{ 43,	"registrationInterrupts" },
-	{ 44,	"hardwareType" },
-	{ 45,	"radioType" },
-	{ 46,	"writeEEPROM" },
-	{ 47,	"writeRadioType" },
-	{ 48,	"entry_exit_debug" },
-	{ 49,	"debug" },
-	{ 50,	"in_speed" },
-	{ 51,	"out_speed" },
-	{ 52,	"in_speed10" },
-	{ 53,	"out_speed10" },
-	{ 54,	"in_speed_max" },
-	{ 55,	"out_speed_max" },
-	{ 56,	"measure_rate" },
-	{ 57,	"pre_Command_Wait" },
-	{ 58,	"rx_tweak1" },
-	{ 59,	"rx_tweak2" },
-	{ 60,	"tx_queue_len" },
-
-	{ 150,	"arlan3-txRing" },
-	{ 151,	"arlan3-rxRing" },
-	{ 152,	"arlan3-18" },
-	{ 153,	"arlan3-ring" },
-	{ 154,	"arlan3-shm-cpy" },
-	{ 155,	"config3" },
-	{ 156,	"reset3" },
-	{}
-};
-
-static const struct trans_ctl_table trans_arlan_table[] = {
-	{ 1,		"arlan0",	trans_arlan_conf_table0 },
-	{ 2,		"arlan1",	trans_arlan_conf_table1 },
-	{ 3,		"arlan2",	trans_arlan_conf_table2 },
-	{ 4,		"arlan3",	trans_arlan_conf_table3 },
-	{}
-};
-
-static const struct trans_ctl_table trans_s390dbf_table[] = {
-	{ 5678 /* CTL_S390DBF_STOPPABLE */,	"debug_stoppable" },
-	{ 5679 /* CTL_S390DBF_ACTIVE */,	"debug_active" },
-	{}
-};
-
-static const struct trans_ctl_table trans_sunrpc_table[] = {
-	{ CTL_RPCDEBUG,		"rpc_debug" },
-	{ CTL_NFSDEBUG,		"nfs_debug" },
-	{ CTL_NFSDDEBUG,	"nfsd_debug" },
-	{ CTL_NLMDEBUG,		"nlm_debug" },
-	{ CTL_SLOTTABLE_UDP,	"udp_slot_table_entries" },
-	{ CTL_SLOTTABLE_TCP,	"tcp_slot_table_entries" },
-	{ CTL_MIN_RESVPORT,	"min_resvport" },
-	{ CTL_MAX_RESVPORT,	"max_resvport" },
-	{}
-};
-
-static const struct trans_ctl_table trans_pm_table[] = {
-	{ 1 /* CTL_PM_SUSPEND */,	"suspend" },
-	{ 2 /* CTL_PM_CMODE */,		"cmode" },
-	{ 3 /* CTL_PM_P0 */,		"p0" },
-	{ 4 /* CTL_PM_CM */,		"cm" },
-	{}
-};
-
-static const struct trans_ctl_table trans_frv_table[] = {
-	{ 1,	"cache-mode" },
-	{ 2,	"pin-cxnr" },
-	{}
-};
-
-static const struct trans_ctl_table trans_root_table[] = {
-	{ CTL_KERN,	"kernel",	trans_kern_table },
-	{ CTL_VM,	"vm",		trans_vm_table },
-	{ CTL_NET,	"net",		trans_net_table },
-	/* CTL_PROC not used */
-	{ CTL_FS,	"fs",		trans_fs_table },
-	{ CTL_DEBUG,	"debug",	trans_debug_table },
-	{ CTL_DEV,	"dev",		trans_dev_table },
-	{ CTL_BUS,	"bus",		trans_bus_table },
-	{ CTL_ABI,	"abi" },
-	/* CTL_CPU not used */
-	{ CTL_ARLAN,	"arlan",	trans_arlan_table },
-	{ CTL_S390DBF,	"s390dbf",	trans_s390dbf_table },
-	{ CTL_SUNRPC,	"sunrpc",	trans_sunrpc_table },
-	{ CTL_PM,	"pm",		trans_pm_table },
-	{ CTL_FRV,	"frv",		trans_frv_table },
-	{}
-};
-
-
-
 
 static int sysctl_depth(struct ctl_table *table)
 {
@@ -1261,47 +28,6 @@
 	return table;
 }
 
-static const struct trans_ctl_table *sysctl_binary_lookup(struct ctl_table *table)
-{
-	struct ctl_table *test;
-	const struct trans_ctl_table *ref;
-	int cur_depth;
-
-	cur_depth = sysctl_depth(table);
-
-	ref = trans_root_table;
-repeat:
-	test = sysctl_parent(table, cur_depth);
-	for (; ref->ctl_name || ref->procname || ref->child; ref++) {
-		int match = 0;
-
-		if (cur_depth && !ref->child)
-			continue;
-
-		if (test->procname && ref->procname &&
-			(strcmp(test->procname, ref->procname) == 0))
-			match++;
-
-		if (test->ctl_name && ref->ctl_name &&
-			(test->ctl_name == ref->ctl_name))
-			match++;
-
-		if (!ref->ctl_name && !ref->procname)
-			match++;
-
-		if (match) {
-			if (cur_depth != 0) {
-				cur_depth--;
-				ref = ref->child;
-				goto repeat;
-			}
-			goto out;
-		}
-	}
-	ref = NULL;
-out:
-	return ref;
-}
 
 static void sysctl_print_path(struct ctl_table *table)
 {
@@ -1315,26 +41,6 @@
 		}
 	}
 	printk(" ");
-	if (table->ctl_name) {
-		for (i = depth; i >= 0; i--) {
-			tmp = sysctl_parent(table, i);
-			printk(".%d", tmp->ctl_name);
-		}
-	}
-}
-
-static void sysctl_repair_table(struct ctl_table *table)
-{
-	/* Don't complain about the classic default
-	 * sysctl strategy routine.  Maybe later we
-	 * can get the tables fixed and complain about
-	 * this.
-	 */
-	if (table->ctl_name && table->procname &&
-		(table->proc_handler == proc_dointvec) &&
-		(!table->strategy)) {
-		table->strategy = sysctl_data;
-	}
 }
 
 static struct ctl_table *sysctl_check_lookup(struct nsproxy *namespaces,
@@ -1352,7 +58,7 @@
 		ref = head->ctl_table;
 repeat:
 		test = sysctl_parent(table, cur_depth);
-		for (; ref->ctl_name || ref->procname; ref++) {
+		for (; ref->procname; ref++) {
 			int match = 0;
 			if (cur_depth && !ref->child)
 				continue;
@@ -1361,10 +67,6 @@
 			    (strcmp(test->procname, ref->procname) == 0))
 					match++;
 
-			if (test->ctl_name && ref->ctl_name &&
-			    (test->ctl_name == ref->ctl_name))
-				match++;
-
 			if (match) {
 				if (cur_depth != 0) {
 					cur_depth--;
@@ -1392,38 +94,6 @@
 	*fail = str;
 }
 
-static int sysctl_check_dir(struct nsproxy *namespaces,
-				struct ctl_table *table)
-{
-	struct ctl_table *ref;
-	int error;
-
-	error = 0;
-	ref = sysctl_check_lookup(namespaces, table);
-	if (ref) {
-		int match = 0;
-		if ((!table->procname && !ref->procname) ||
-		    (table->procname && ref->procname &&
-		     (strcmp(table->procname, ref->procname) == 0)))
-			match++;
-
-		if ((!table->ctl_name && !ref->ctl_name) ||
-		    (table->ctl_name && ref->ctl_name &&
-		     (table->ctl_name == ref->ctl_name)))
-			match++;
-
-		if (match != 2) {
-			printk(KERN_ERR "%s: failed: ", __func__);
-			sysctl_print_path(table);
-			printk(" ref: ");
-			sysctl_print_path(ref);
-			printk("\n");
-			error = -EINVAL;
-		}
-	}
-	return error;
-}
-
 static void sysctl_check_leaf(struct nsproxy *namespaces,
 				struct ctl_table *table, const char **fail)
 {
@@ -1434,37 +104,15 @@
 		set_fail(fail, table, "Sysctl already exists");
 }
 
-static void sysctl_check_bin_path(struct ctl_table *table, const char **fail)
-{
-	const struct trans_ctl_table *ref;
-
-	ref = sysctl_binary_lookup(table);
-	if (table->ctl_name && !ref)
-		set_fail(fail, table, "Unknown sysctl binary path");
-	if (ref) {
-		if (ref->procname &&
-		    (!table->procname ||
-		     (strcmp(table->procname, ref->procname) != 0)))
-			set_fail(fail, table, "procname does not match binary path procname");
-
-		if (ref->ctl_name && table->ctl_name &&
-		    (table->ctl_name != ref->ctl_name))
-			set_fail(fail, table, "ctl_name does not match binary path ctl_name");
-	}
-}
-
 int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table)
 {
 	int error = 0;
-	for (; table->ctl_name || table->procname; table++) {
+	for (; table->procname; table++) {
 		const char *fail = NULL;
 
-		sysctl_repair_table(table);
 		if (table->parent) {
 			if (table->procname && !table->parent->procname)
 				set_fail(&fail, table, "Parent without procname");
-			if (table->ctl_name && !table->parent->ctl_name)
-				set_fail(&fail, table, "Parent without ctl_name");
 		}
 		if (!table->procname)
 			set_fail(&fail, table, "No procname");
@@ -1477,21 +125,12 @@
 				set_fail(&fail, table, "Writable sysctl directory");
 			if (table->proc_handler)
 				set_fail(&fail, table, "Directory with proc_handler");
-			if (table->strategy)
-				set_fail(&fail, table, "Directory with strategy");
 			if (table->extra1)
 				set_fail(&fail, table, "Directory with extra1");
 			if (table->extra2)
 				set_fail(&fail, table, "Directory with extra2");
-			if (sysctl_check_dir(namespaces, table))
-				set_fail(&fail, table, "Inconsistent directory names");
 		} else {
-			if ((table->strategy == sysctl_data) ||
-			    (table->strategy == sysctl_string) ||
-			    (table->strategy == sysctl_intvec) ||
-			    (table->strategy == sysctl_jiffies) ||
-			    (table->strategy == sysctl_ms_jiffies) ||
-			    (table->proc_handler == proc_dostring) ||
+			if ((table->proc_handler == proc_dostring) ||
 			    (table->proc_handler == proc_dointvec) ||
 			    (table->proc_handler == proc_dointvec_minmax) ||
 			    (table->proc_handler == proc_dointvec_jiffies) ||
@@ -1513,14 +152,6 @@
 						set_fail(&fail, table, "No max");
 				}
 			}
-#ifdef CONFIG_SYSCTL_SYSCALL
-			if (table->ctl_name && !table->strategy)
-				set_fail(&fail, table, "Missing strategy");
-#endif
-#if 0
-			if (!table->ctl_name && table->strategy)
-				set_fail(&fail, table, "Strategy without ctl_name");
-#endif
 #ifdef CONFIG_PROC_SYSCTL
 			if (table->procname && !table->proc_handler)
 				set_fail(&fail, table, "No proc_handler");
@@ -1531,7 +162,6 @@
 #endif
 			sysctl_check_leaf(namespaces, table, &fail);
 		}
-		sysctl_check_bin_path(table, &fail);
 		if (table->mode > 0777)
 			set_fail(&fail, table, "bogus .mode");
 		if (fail) {
diff --git a/kernel/time.c b/kernel/time.c
index 2e2e469..8047980 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -662,6 +662,36 @@
 #endif
 }
 
+/**
+ * nsecs_to_jiffies - Convert nsecs in u64 to jiffies
+ *
+ * @n:	nsecs in u64
+ *
+ * Unlike {m,u}secs_to_jiffies, type of input is not unsigned int but u64.
+ * And this doesn't return MAX_JIFFY_OFFSET since this function is designed
+ * for scheduler, not for use in device drivers to calculate timeout value.
+ *
+ * note:
+ *   NSEC_PER_SEC = 10^9 = (5^9 * 2^9) = (1953125 * 512)
+ *   ULLONG_MAX ns = 18446744073.709551615 secs = about 584 years
+ */
+unsigned long nsecs_to_jiffies(u64 n)
+{
+#if (NSEC_PER_SEC % HZ) == 0
+	/* Common case, HZ = 100, 128, 200, 250, 256, 500, 512, 1000 etc. */
+	return div_u64(n, NSEC_PER_SEC / HZ);
+#elif (HZ % 512) == 0
+	/* overflow after 292 years if HZ = 1024 */
+	return div_u64(n * HZ / 512, NSEC_PER_SEC / 512);
+#else
+	/*
+	 * Generic case - optimized for cases where HZ is a multiple of 3.
+	 * overflow after 64.99 years, exact for HZ = 60, 72, 90, 120 etc.
+	 */
+	return div_u64(n * 9, (9ull * NSEC_PER_SEC + HZ / 2) / HZ);
+#endif
+}
+
 #if (BITS_PER_LONG < 64)
 u64 get_jiffies_64(void)
 {
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 5e18c6a..4a31090 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -39,7 +39,7 @@
 	tc->cycle_last = cc->read(cc);
 	tc->nsec = start_tstamp;
 }
-EXPORT_SYMBOL(timecounter_init);
+EXPORT_SYMBOL_GPL(timecounter_init);
 
 /**
  * timecounter_read_delta - get nanoseconds since last call of this function
@@ -83,7 +83,7 @@
 
 	return nsec;
 }
-EXPORT_SYMBOL(timecounter_read);
+EXPORT_SYMBOL_GPL(timecounter_read);
 
 u64 timecounter_cyc2time(struct timecounter *tc,
 			 cycle_t cycle_tstamp)
@@ -105,7 +105,7 @@
 
 	return nsec;
 }
-EXPORT_SYMBOL(timecounter_cyc2time);
+EXPORT_SYMBOL_GPL(timecounter_cyc2time);
 
 /*[Clocksource internal variables]---------
  * curr_clocksource:
diff --git a/kernel/time/timecompare.c b/kernel/time/timecompare.c
index 71e7f1a..96ff643 100644
--- a/kernel/time/timecompare.c
+++ b/kernel/time/timecompare.c
@@ -40,7 +40,7 @@
 
 	return ns_to_ktime(nsec);
 }
-EXPORT_SYMBOL(timecompare_transform);
+EXPORT_SYMBOL_GPL(timecompare_transform);
 
 int timecompare_offset(struct timecompare *sync,
 		       s64 *offset,
@@ -131,7 +131,7 @@
 
 	return used;
 }
-EXPORT_SYMBOL(timecompare_offset);
+EXPORT_SYMBOL_GPL(timecompare_offset);
 
 void __timecompare_update(struct timecompare *sync,
 			  u64 source_tstamp)
@@ -188,4 +188,4 @@
 		}
 	}
 }
-EXPORT_SYMBOL(__timecompare_update);
+EXPORT_SYMBOL_GPL(__timecompare_update);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index b416512..d006554 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -339,6 +339,27 @@
 	  power management decisions, specifically the C-state and P-state
 	  behavior.
 
+config KSYM_TRACER
+	bool "Trace read and write access on kernel memory locations"
+	depends on HAVE_HW_BREAKPOINT
+	select TRACING
+	help
+	  This tracer helps find read and write operations on any given kernel
+	  symbol i.e. /proc/kallsyms.
+
+config PROFILE_KSYM_TRACER
+	bool "Profile all kernel memory accesses on 'watched' variables"
+	depends on KSYM_TRACER
+	help
+	  This tracer profiles kernel accesses on variables watched through the
+	  ksym tracer ftrace plugin. Depending upon the hardware, all read
+	  and write operations on kernel variables can be monitored for
+	  accesses.
+
+	  The results will be displayed in:
+	  /debugfs/tracing/profile_ksym
+
+	  Say N if unsure.
 
 config STACK_TRACER
 	bool "Trace max stack"
@@ -428,6 +449,23 @@
 
 	  If unsure, say N.
 
+config KPROBE_EVENT
+	depends on KPROBES
+	depends on X86
+	bool "Enable kprobes-based dynamic events"
+	select TRACING
+	default y
+	help
+	  This allows the user to add tracing events (similar to tracepoints) on the fly
+	  via the ftrace interface. See Documentation/trace/kprobetrace.txt
+	  for more details.
+
+	  Those events can be inserted wherever kprobes can probe, and record
+	  various register and memory values.
+
+	  This option is also required by perf-probe subcommand of perf tools. If
+	  you want to use perf tools, this option is strongly recommended.
+
 config DYNAMIC_FTRACE
 	bool "enable/disable ftrace tracepoints dynamically"
 	depends on FUNCTION_TRACER
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index 26f03ac..cd9ecd8 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -53,6 +53,8 @@
 obj-$(CONFIG_FTRACE_SYSCALLS) += trace_syscalls.o
 obj-$(CONFIG_EVENT_PROFILE) += trace_event_profile.o
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
+obj-$(CONFIG_KPROBE_EVENT) += trace_kprobe.o
+obj-$(CONFIG_KSYM_TRACER) += trace_ksym.o
 obj-$(CONFIG_EVENT_TRACING) += power-traces.o
 
 libftrace-y := ftrace.o
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 6dc4e5e..e51a1bc 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -60,6 +60,13 @@
 /* Quick disabling of function tracer. */
 int function_trace_stop;
 
+/* List for set_ftrace_pid's pids. */
+LIST_HEAD(ftrace_pids);
+struct ftrace_pid {
+	struct list_head list;
+	struct pid *pid;
+};
+
 /*
  * ftrace_disabled is set when an anomaly is discovered.
  * ftrace_disabled is much stronger than ftrace_enabled.
@@ -78,6 +85,10 @@
 ftrace_func_t __ftrace_trace_function __read_mostly = ftrace_stub;
 ftrace_func_t ftrace_pid_function __read_mostly = ftrace_stub;
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static int ftrace_set_func(unsigned long *array, int *idx, char *buffer);
+#endif
+
 static void ftrace_list_func(unsigned long ip, unsigned long parent_ip)
 {
 	struct ftrace_ops *op = ftrace_list;
@@ -155,7 +166,7 @@
 		else
 			func = ftrace_list_func;
 
-		if (ftrace_pid_trace) {
+		if (!list_empty(&ftrace_pids)) {
 			set_ftrace_pid_function(func);
 			func = ftrace_pid_func;
 		}
@@ -203,7 +214,7 @@
 		if (ftrace_list->next == &ftrace_list_end) {
 			ftrace_func_t func = ftrace_list->func;
 
-			if (ftrace_pid_trace) {
+			if (!list_empty(&ftrace_pids)) {
 				set_ftrace_pid_function(func);
 				func = ftrace_pid_func;
 			}
@@ -231,7 +242,7 @@
 	func = __ftrace_trace_function;
 #endif
 
-	if (ftrace_pid_trace) {
+	if (!list_empty(&ftrace_pids)) {
 		set_ftrace_pid_function(func);
 		func = ftrace_pid_func;
 	} else {
@@ -821,8 +832,6 @@
 }
 #endif /* CONFIG_FUNCTION_PROFILER */
 
-/* set when tracing only a pid */
-struct pid *ftrace_pid_trace;
 static struct pid * const ftrace_swapper_pid = &init_struct_pid;
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -1261,12 +1270,34 @@
 		ftrace_new_addrs = p->newlist;
 		p->flags = 0L;
 
-		/* convert record (i.e, patch mcount-call with NOP) */
-		if (ftrace_code_disable(mod, p)) {
-			p->flags |= FTRACE_FL_CONVERTED;
-			ftrace_update_cnt++;
-		} else
+		/*
+		 * Do the initial record convertion from mcount jump
+		 * to the NOP instructions.
+		 */
+		if (!ftrace_code_disable(mod, p)) {
 			ftrace_free_rec(p);
+			continue;
+		}
+
+		p->flags |= FTRACE_FL_CONVERTED;
+		ftrace_update_cnt++;
+
+		/*
+		 * If the tracing is enabled, go ahead and enable the record.
+		 *
+		 * The reason not to enable the record immediatelly is the
+		 * inherent check of ftrace_make_nop/ftrace_make_call for
+		 * correct previous instructions.  Making first the NOP
+		 * conversion puts the module to the correct state, thus
+		 * passing the ftrace_make_call check.
+		 */
+		if (ftrace_start_up) {
+			int failed = __ftrace_replace_code(p, 1);
+			if (failed) {
+				ftrace_bug(failed, p->ip);
+				ftrace_free_rec(p);
+			}
+		}
 	}
 
 	stop = ftrace_now(raw_smp_processor_id());
@@ -1656,60 +1687,6 @@
 	return ret;
 }
 
-enum {
-	MATCH_FULL,
-	MATCH_FRONT_ONLY,
-	MATCH_MIDDLE_ONLY,
-	MATCH_END_ONLY,
-};
-
-/*
- * (static function - no need for kernel doc)
- *
- * Pass in a buffer containing a glob and this function will
- * set search to point to the search part of the buffer and
- * return the type of search it is (see enum above).
- * This does modify buff.
- *
- * Returns enum type.
- *  search returns the pointer to use for comparison.
- *  not returns 1 if buff started with a '!'
- *     0 otherwise.
- */
-static int
-ftrace_setup_glob(char *buff, int len, char **search, int *not)
-{
-	int type = MATCH_FULL;
-	int i;
-
-	if (buff[0] == '!') {
-		*not = 1;
-		buff++;
-		len--;
-	} else
-		*not = 0;
-
-	*search = buff;
-
-	for (i = 0; i < len; i++) {
-		if (buff[i] == '*') {
-			if (!i) {
-				*search = buff + 1;
-				type = MATCH_END_ONLY;
-			} else {
-				if (type == MATCH_END_ONLY)
-					type = MATCH_MIDDLE_ONLY;
-				else
-					type = MATCH_FRONT_ONLY;
-				buff[i] = 0;
-				break;
-			}
-		}
-	}
-
-	return type;
-}
-
 static int ftrace_match(char *str, char *regex, int len, int type)
 {
 	int matched = 0;
@@ -1758,7 +1735,7 @@
 	int not;
 
 	flag = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE;
-	type = ftrace_setup_glob(buff, len, &search, &not);
+	type = filter_parse_regex(buff, len, &search, &not);
 
 	search_len = strlen(search);
 
@@ -1826,7 +1803,7 @@
 	}
 
 	if (strlen(buff)) {
-		type = ftrace_setup_glob(buff, strlen(buff), &search, &not);
+		type = filter_parse_regex(buff, strlen(buff), &search, &not);
 		search_len = strlen(search);
 	}
 
@@ -1991,7 +1968,7 @@
 	int count = 0;
 	char *search;
 
-	type = ftrace_setup_glob(glob, strlen(glob), &search, &not);
+	type = filter_parse_regex(glob, strlen(glob), &search, &not);
 	len = strlen(search);
 
 	/* we do not support '!' for function probes */
@@ -2068,7 +2045,7 @@
 	else if (glob) {
 		int not;
 
-		type = ftrace_setup_glob(glob, strlen(glob), &search, &not);
+		type = filter_parse_regex(glob, strlen(glob), &search, &not);
 		len = strlen(search);
 
 		/* we do not support '!' for function probes */
@@ -2312,6 +2289,32 @@
 }
 __setup("ftrace_filter=", set_ftrace_filter);
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static char ftrace_graph_buf[FTRACE_FILTER_SIZE] __initdata;
+static int __init set_graph_function(char *str)
+{
+	strlcpy(ftrace_graph_buf, str, FTRACE_FILTER_SIZE);
+	return 1;
+}
+__setup("ftrace_graph_filter=", set_graph_function);
+
+static void __init set_ftrace_early_graph(char *buf)
+{
+	int ret;
+	char *func;
+
+	while (buf) {
+		func = strsep(&buf, ",");
+		/* we allow only one expression at a time */
+		ret = ftrace_set_func(ftrace_graph_funcs, &ftrace_graph_count,
+				      func);
+		if (ret)
+			printk(KERN_DEBUG "ftrace: function %s not "
+					  "traceable\n", func);
+	}
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
 static void __init set_ftrace_early_filter(char *buf, int enable)
 {
 	char *func;
@@ -2328,6 +2331,10 @@
 		set_ftrace_early_filter(ftrace_filter_buf, 1);
 	if (ftrace_notrace_buf[0])
 		set_ftrace_early_filter(ftrace_notrace_buf, 0);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	if (ftrace_graph_buf[0])
+		set_ftrace_early_graph(ftrace_graph_buf);
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 }
 
 static int
@@ -2513,7 +2520,7 @@
 		return -ENODEV;
 
 	/* decode regex */
-	type = ftrace_setup_glob(buffer, strlen(buffer), &search, &not);
+	type = filter_parse_regex(buffer, strlen(buffer), &search, &not);
 	if (not)
 		return -EINVAL;
 
@@ -2624,7 +2631,7 @@
 	return 0;
 }
 
-static int ftrace_convert_nops(struct module *mod,
+static int ftrace_process_locs(struct module *mod,
 			       unsigned long *start,
 			       unsigned long *end)
 {
@@ -2684,7 +2691,7 @@
 {
 	if (ftrace_disabled || start == end)
 		return;
-	ftrace_convert_nops(mod, start, end);
+	ftrace_process_locs(mod, start, end);
 }
 
 static int ftrace_module_notify(struct notifier_block *self,
@@ -2745,7 +2752,7 @@
 
 	last_ftrace_enabled = ftrace_enabled = 1;
 
-	ret = ftrace_convert_nops(NULL,
+	ret = ftrace_process_locs(NULL,
 				  __start_mcount_loc,
 				  __stop_mcount_loc);
 
@@ -2778,23 +2785,6 @@
 # define ftrace_shutdown_sysctl()	do { } while (0)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
-static ssize_t
-ftrace_pid_read(struct file *file, char __user *ubuf,
-		       size_t cnt, loff_t *ppos)
-{
-	char buf[64];
-	int r;
-
-	if (ftrace_pid_trace == ftrace_swapper_pid)
-		r = sprintf(buf, "swapper tasks\n");
-	else if (ftrace_pid_trace)
-		r = sprintf(buf, "%u\n", pid_vnr(ftrace_pid_trace));
-	else
-		r = sprintf(buf, "no pid\n");
-
-	return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
-}
-
 static void clear_ftrace_swapper(void)
 {
 	struct task_struct *p;
@@ -2845,14 +2835,12 @@
 	rcu_read_unlock();
 }
 
-static void clear_ftrace_pid_task(struct pid **pid)
+static void clear_ftrace_pid_task(struct pid *pid)
 {
-	if (*pid == ftrace_swapper_pid)
+	if (pid == ftrace_swapper_pid)
 		clear_ftrace_swapper();
 	else
-		clear_ftrace_pid(*pid);
-
-	*pid = NULL;
+		clear_ftrace_pid(pid);
 }
 
 static void set_ftrace_pid_task(struct pid *pid)
@@ -2863,12 +2851,141 @@
 		set_ftrace_pid(pid);
 }
 
+static int ftrace_pid_add(int p)
+{
+	struct pid *pid;
+	struct ftrace_pid *fpid;
+	int ret = -EINVAL;
+
+	mutex_lock(&ftrace_lock);
+
+	if (!p)
+		pid = ftrace_swapper_pid;
+	else
+		pid = find_get_pid(p);
+
+	if (!pid)
+		goto out;
+
+	ret = 0;
+
+	list_for_each_entry(fpid, &ftrace_pids, list)
+		if (fpid->pid == pid)
+			goto out_put;
+
+	ret = -ENOMEM;
+
+	fpid = kmalloc(sizeof(*fpid), GFP_KERNEL);
+	if (!fpid)
+		goto out_put;
+
+	list_add(&fpid->list, &ftrace_pids);
+	fpid->pid = pid;
+
+	set_ftrace_pid_task(pid);
+
+	ftrace_update_pid_func();
+	ftrace_startup_enable(0);
+
+	mutex_unlock(&ftrace_lock);
+	return 0;
+
+out_put:
+	if (pid != ftrace_swapper_pid)
+		put_pid(pid);
+
+out:
+	mutex_unlock(&ftrace_lock);
+	return ret;
+}
+
+static void ftrace_pid_reset(void)
+{
+	struct ftrace_pid *fpid, *safe;
+
+	mutex_lock(&ftrace_lock);
+	list_for_each_entry_safe(fpid, safe, &ftrace_pids, list) {
+		struct pid *pid = fpid->pid;
+
+		clear_ftrace_pid_task(pid);
+
+		list_del(&fpid->list);
+		kfree(fpid);
+	}
+
+	ftrace_update_pid_func();
+	ftrace_startup_enable(0);
+
+	mutex_unlock(&ftrace_lock);
+}
+
+static void *fpid_start(struct seq_file *m, loff_t *pos)
+{
+	mutex_lock(&ftrace_lock);
+
+	if (list_empty(&ftrace_pids) && (!*pos))
+		return (void *) 1;
+
+	return seq_list_start(&ftrace_pids, *pos);
+}
+
+static void *fpid_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	if (v == (void *)1)
+		return NULL;
+
+	return seq_list_next(v, &ftrace_pids, pos);
+}
+
+static void fpid_stop(struct seq_file *m, void *p)
+{
+	mutex_unlock(&ftrace_lock);
+}
+
+static int fpid_show(struct seq_file *m, void *v)
+{
+	const struct ftrace_pid *fpid = list_entry(v, struct ftrace_pid, list);
+
+	if (v == (void *)1) {
+		seq_printf(m, "no pid\n");
+		return 0;
+	}
+
+	if (fpid->pid == ftrace_swapper_pid)
+		seq_printf(m, "swapper tasks\n");
+	else
+		seq_printf(m, "%u\n", pid_vnr(fpid->pid));
+
+	return 0;
+}
+
+static const struct seq_operations ftrace_pid_sops = {
+	.start = fpid_start,
+	.next = fpid_next,
+	.stop = fpid_stop,
+	.show = fpid_show,
+};
+
+static int
+ftrace_pid_open(struct inode *inode, struct file *file)
+{
+	int ret = 0;
+
+	if ((file->f_mode & FMODE_WRITE) &&
+	    (file->f_flags & O_TRUNC))
+		ftrace_pid_reset();
+
+	if (file->f_mode & FMODE_READ)
+		ret = seq_open(file, &ftrace_pid_sops);
+
+	return ret;
+}
+
 static ssize_t
 ftrace_pid_write(struct file *filp, const char __user *ubuf,
 		   size_t cnt, loff_t *ppos)
 {
-	struct pid *pid;
-	char buf[64];
+	char buf[64], *tmp;
 	long val;
 	int ret;
 
@@ -2880,57 +2997,38 @@
 
 	buf[cnt] = 0;
 
-	ret = strict_strtol(buf, 10, &val);
+	/*
+	 * Allow "echo > set_ftrace_pid" or "echo -n '' > set_ftrace_pid"
+	 * to clean the filter quietly.
+	 */
+	tmp = strstrip(buf);
+	if (strlen(tmp) == 0)
+		return 1;
+
+	ret = strict_strtol(tmp, 10, &val);
 	if (ret < 0)
 		return ret;
 
-	mutex_lock(&ftrace_lock);
-	if (val < 0) {
-		/* disable pid tracing */
-		if (!ftrace_pid_trace)
-			goto out;
+	ret = ftrace_pid_add(val);
 
-		clear_ftrace_pid_task(&ftrace_pid_trace);
+	return ret ? ret : cnt;
+}
 
-	} else {
-		/* swapper task is special */
-		if (!val) {
-			pid = ftrace_swapper_pid;
-			if (pid == ftrace_pid_trace)
-				goto out;
-		} else {
-			pid = find_get_pid(val);
+static int
+ftrace_pid_release(struct inode *inode, struct file *file)
+{
+	if (file->f_mode & FMODE_READ)
+		seq_release(inode, file);
 
-			if (pid == ftrace_pid_trace) {
-				put_pid(pid);
-				goto out;
-			}
-		}
-
-		if (ftrace_pid_trace)
-			clear_ftrace_pid_task(&ftrace_pid_trace);
-
-		if (!pid)
-			goto out;
-
-		ftrace_pid_trace = pid;
-
-		set_ftrace_pid_task(ftrace_pid_trace);
-	}
-
-	/* update the function call */
-	ftrace_update_pid_func();
-	ftrace_startup_enable(0);
-
- out:
-	mutex_unlock(&ftrace_lock);
-
-	return cnt;
+	return 0;
 }
 
 static const struct file_operations ftrace_pid_fops = {
-	.read = ftrace_pid_read,
-	.write = ftrace_pid_write,
+	.open		= ftrace_pid_open,
+	.write		= ftrace_pid_write,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= ftrace_pid_release,
 };
 
 static __init int ftrace_init_debugfs(void)
@@ -3293,4 +3391,3 @@
 	ftrace_stop();
 }
 #endif
-
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 5dd017f..a1ca495 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -397,18 +397,21 @@
 	int ret;
 
 	ret = trace_seq_printf(s, "\tfield: u64 timestamp;\t"
-			       "offset:0;\tsize:%u;\n",
-			       (unsigned int)sizeof(field.time_stamp));
+			       "offset:0;\tsize:%u;\tsigned:%u;\n",
+			       (unsigned int)sizeof(field.time_stamp),
+			       (unsigned int)is_signed_type(u64));
 
 	ret = trace_seq_printf(s, "\tfield: local_t commit;\t"
-			       "offset:%u;\tsize:%u;\n",
+			       "offset:%u;\tsize:%u;\tsigned:%u;\n",
 			       (unsigned int)offsetof(typeof(field), commit),
-			       (unsigned int)sizeof(field.commit));
+			       (unsigned int)sizeof(field.commit),
+			       (unsigned int)is_signed_type(long));
 
 	ret = trace_seq_printf(s, "\tfield: char data;\t"
-			       "offset:%u;\tsize:%u;\n",
+			       "offset:%u;\tsize:%u;\tsigned:%u;\n",
 			       (unsigned int)offsetof(typeof(field), data),
-			       (unsigned int)BUF_PAGE_SIZE);
+			       (unsigned int)BUF_PAGE_SIZE,
+			       (unsigned int)is_signed_type(char));
 
 	return ret;
 }
@@ -1787,9 +1790,9 @@
 static struct ring_buffer_event *
 rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer,
 	     unsigned long length, unsigned long tail,
-	     struct buffer_page *commit_page,
 	     struct buffer_page *tail_page, u64 *ts)
 {
+	struct buffer_page *commit_page = cpu_buffer->commit_page;
 	struct ring_buffer *buffer = cpu_buffer->buffer;
 	struct buffer_page *next_page;
 	int ret;
@@ -1892,13 +1895,10 @@
 __rb_reserve_next(struct ring_buffer_per_cpu *cpu_buffer,
 		  unsigned type, unsigned long length, u64 *ts)
 {
-	struct buffer_page *tail_page, *commit_page;
+	struct buffer_page *tail_page;
 	struct ring_buffer_event *event;
 	unsigned long tail, write;
 
-	commit_page = cpu_buffer->commit_page;
-	/* we just need to protect against interrupts */
-	barrier();
 	tail_page = cpu_buffer->tail_page;
 	write = local_add_return(length, &tail_page->write);
 
@@ -1909,7 +1909,7 @@
 	/* See if we shot pass the end of this buffer page */
 	if (write > BUF_PAGE_SIZE)
 		return rb_move_tail(cpu_buffer, length, tail,
-				    commit_page, tail_page, ts);
+				    tail_page, ts);
 
 	/* We reserved something on the buffer */
 
diff --git a/kernel/trace/ring_buffer_benchmark.c b/kernel/trace/ring_buffer_benchmark.c
index 573d3cc..b2477ca 100644
--- a/kernel/trace/ring_buffer_benchmark.c
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -35,6 +35,28 @@
 module_param(disable_reader, uint, 0644);
 MODULE_PARM_DESC(disable_reader, "only run producer");
 
+static int write_iteration = 50;
+module_param(write_iteration, uint, 0644);
+MODULE_PARM_DESC(write_iteration, "# of writes between timestamp readings");
+
+static int producer_nice = 19;
+static int consumer_nice = 19;
+
+static int producer_fifo = -1;
+static int consumer_fifo = -1;
+
+module_param(producer_nice, uint, 0644);
+MODULE_PARM_DESC(producer_nice, "nice prio for producer");
+
+module_param(consumer_nice, uint, 0644);
+MODULE_PARM_DESC(consumer_nice, "nice prio for consumer");
+
+module_param(producer_fifo, uint, 0644);
+MODULE_PARM_DESC(producer_fifo, "fifo prio for producer");
+
+module_param(consumer_fifo, uint, 0644);
+MODULE_PARM_DESC(consumer_fifo, "fifo prio for consumer");
+
 static int read_events;
 
 static int kill_test;
@@ -208,15 +230,18 @@
 	do {
 		struct ring_buffer_event *event;
 		int *entry;
+		int i;
 
-		event = ring_buffer_lock_reserve(buffer, 10);
-		if (!event) {
-			missed++;
-		} else {
-			hit++;
-			entry = ring_buffer_event_data(event);
-			*entry = smp_processor_id();
-			ring_buffer_unlock_commit(buffer, event);
+		for (i = 0; i < write_iteration; i++) {
+			event = ring_buffer_lock_reserve(buffer, 10);
+			if (!event) {
+				missed++;
+			} else {
+				hit++;
+				entry = ring_buffer_event_data(event);
+				*entry = smp_processor_id();
+				ring_buffer_unlock_commit(buffer, event);
+			}
 		}
 		do_gettimeofday(&end_tv);
 
@@ -263,6 +288,27 @@
 
 	if (kill_test)
 		trace_printk("ERROR!\n");
+
+	if (!disable_reader) {
+		if (consumer_fifo < 0)
+			trace_printk("Running Consumer at nice: %d\n",
+				     consumer_nice);
+		else
+			trace_printk("Running Consumer at SCHED_FIFO %d\n",
+				     consumer_fifo);
+	}
+	if (producer_fifo < 0)
+		trace_printk("Running Producer at nice: %d\n",
+			     producer_nice);
+	else
+		trace_printk("Running Producer at SCHED_FIFO %d\n",
+			     producer_fifo);
+
+	/* Let the user know that the test is running at low priority */
+	if (producer_fifo < 0 && consumer_fifo < 0 &&
+	    producer_nice == 19 && consumer_nice == 19)
+		trace_printk("WARNING!!! This test is running at lowest priority.\n");
+
 	trace_printk("Time:     %lld (usecs)\n", time);
 	trace_printk("Overruns: %lld\n", overruns);
 	if (disable_reader)
@@ -392,6 +438,27 @@
 	if (IS_ERR(producer))
 		goto out_kill;
 
+	/*
+	 * Run them as low-prio background tasks by default:
+	 */
+	if (!disable_reader) {
+		if (consumer_fifo >= 0) {
+			struct sched_param param = {
+				.sched_priority = consumer_fifo
+			};
+			sched_setscheduler(consumer, SCHED_FIFO, &param);
+		} else
+			set_user_nice(consumer, consumer_nice);
+	}
+
+	if (producer_fifo >= 0) {
+		struct sched_param param = {
+			.sched_priority = consumer_fifo
+		};
+		sched_setscheduler(producer, SCHED_FIFO, &param);
+	} else
+		set_user_nice(producer, producer_nice);
+
 	return 0;
 
  out_kill:
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index b20d3ec..874f289 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -129,7 +129,7 @@
 static char bootup_tracer_buf[MAX_TRACER_SIZE] __initdata;
 static char *default_bootup_tracer;
 
-static int __init set_ftrace(char *str)
+static int __init set_cmdline_ftrace(char *str)
 {
 	strncpy(bootup_tracer_buf, str, MAX_TRACER_SIZE);
 	default_bootup_tracer = bootup_tracer_buf;
@@ -137,7 +137,7 @@
 	ring_buffer_expanded = 1;
 	return 1;
 }
-__setup("ftrace=", set_ftrace);
+__setup("ftrace=", set_cmdline_ftrace);
 
 static int __init set_ftrace_dump_on_oops(char *str)
 {
@@ -1361,10 +1361,11 @@
 	pause_graph_tracing();
 	raw_local_irq_save(irq_flags);
 	__raw_spin_lock(&trace_buf_lock);
-	len = vsnprintf(trace_buf, TRACE_BUF_SIZE, fmt, args);
-
-	len = min(len, TRACE_BUF_SIZE-1);
-	trace_buf[len] = 0;
+	if (args == NULL) {
+		strncpy(trace_buf, fmt, TRACE_BUF_SIZE);
+		len = strlen(trace_buf);
+	} else
+		len = vsnprintf(trace_buf, TRACE_BUF_SIZE, fmt, args);
 
 	size = sizeof(*entry) + len + 1;
 	buffer = tr->buffer;
@@ -1373,10 +1374,10 @@
 	if (!event)
 		goto out_unlock;
 	entry = ring_buffer_event_data(event);
-	entry->ip			= ip;
+	entry->ip = ip;
 
 	memcpy(&entry->buf, trace_buf, len);
-	entry->buf[len] = 0;
+	entry->buf[len] = '\0';
 	if (!filter_check_discard(call, entry, buffer, event))
 		ring_buffer_unlock_commit(buffer, event);
 
@@ -3319,22 +3320,11 @@
 	return cnt;
 }
 
-static int mark_printk(const char *fmt, ...)
-{
-	int ret;
-	va_list args;
-	va_start(args, fmt);
-	ret = trace_vprintk(0, fmt, args);
-	va_end(args);
-	return ret;
-}
-
 static ssize_t
 tracing_mark_write(struct file *filp, const char __user *ubuf,
 					size_t cnt, loff_t *fpos)
 {
 	char *buf;
-	char *end;
 
 	if (tracing_disabled)
 		return -EINVAL;
@@ -3342,7 +3332,7 @@
 	if (cnt > TRACE_BUF_SIZE)
 		cnt = TRACE_BUF_SIZE;
 
-	buf = kmalloc(cnt + 1, GFP_KERNEL);
+	buf = kmalloc(cnt + 2, GFP_KERNEL);
 	if (buf == NULL)
 		return -ENOMEM;
 
@@ -3350,14 +3340,13 @@
 		kfree(buf);
 		return -EFAULT;
 	}
+	if (buf[cnt-1] != '\n') {
+		buf[cnt] = '\n';
+		buf[cnt+1] = '\0';
+	} else
+		buf[cnt] = '\0';
 
-	/* Cut from the first nil or newline. */
-	buf[cnt] = '\0';
-	end = strchr(buf, '\n');
-	if (end)
-		*end = '\0';
-
-	cnt = mark_printk("%s\n", buf);
+	cnt = trace_vprintk(0, buf, NULL);
 	kfree(buf);
 	*fpos += cnt;
 
@@ -3730,7 +3719,7 @@
 
 	s = kmalloc(sizeof(*s), GFP_KERNEL);
 	if (!s)
-		return ENOMEM;
+		return -ENOMEM;
 
 	trace_seq_init(s);
 
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 405cb85..1d7f483 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -11,6 +11,7 @@
 #include <linux/ftrace.h>
 #include <trace/boot.h>
 #include <linux/kmemtrace.h>
+#include <linux/hw_breakpoint.h>
 
 #include <linux/trace_seq.h>
 #include <linux/ftrace_event.h>
@@ -37,6 +38,7 @@
 	TRACE_KMEM_ALLOC,
 	TRACE_KMEM_FREE,
 	TRACE_BLK,
+	TRACE_KSYM,
 
 	__TRACE_LAST_TYPE,
 };
@@ -98,9 +100,32 @@
 struct syscall_trace_exit {
 	struct trace_entry	ent;
 	int			nr;
-	unsigned long		ret;
+	long			ret;
 };
 
+struct kprobe_trace_entry {
+	struct trace_entry	ent;
+	unsigned long		ip;
+	int			nargs;
+	unsigned long		args[];
+};
+
+#define SIZEOF_KPROBE_TRACE_ENTRY(n)			\
+	(offsetof(struct kprobe_trace_entry, args) +	\
+	(sizeof(unsigned long) * (n)))
+
+struct kretprobe_trace_entry {
+	struct trace_entry	ent;
+	unsigned long		func;
+	unsigned long		ret_ip;
+	int			nargs;
+	unsigned long		args[];
+};
+
+#define SIZEOF_KRETPROBE_TRACE_ENTRY(n)			\
+	(offsetof(struct kretprobe_trace_entry, args) +	\
+	(sizeof(unsigned long) * (n)))
+
 /*
  * trace_flag_type is an enumeration that holds different
  * states when a trace occurs. These are:
@@ -209,6 +234,7 @@
 			  TRACE_KMEM_ALLOC);	\
 		IF_ASSIGN(var, ent, struct kmemtrace_free_entry,	\
 			  TRACE_KMEM_FREE);	\
+		IF_ASSIGN(var, ent, struct ksym_trace_entry, TRACE_KSYM);\
 		__ftrace_bad_type();					\
 	} while (0)
 
@@ -364,6 +390,8 @@
 void unregister_tracer(struct tracer *type);
 int is_tracing_stopped(void);
 
+extern int process_new_ksym_entry(char *ksymname, int op, unsigned long addr);
+
 extern unsigned long nsecs_to_usecs(unsigned long nsecs);
 
 #ifdef CONFIG_TRACER_MAX_TRACE
@@ -438,6 +466,8 @@
 					 struct trace_array *tr);
 extern int trace_selftest_startup_hw_branches(struct tracer *trace,
 					      struct trace_array *tr);
+extern int trace_selftest_startup_ksym(struct tracer *trace,
+					 struct trace_array *tr);
 #endif /* CONFIG_FTRACE_STARTUP_TEST */
 
 extern void *head_page(struct trace_array_cpu *data);
@@ -483,10 +513,6 @@
 	return 0;
 }
 #else
-static inline int ftrace_trace_addr(unsigned long addr)
-{
-	return 1;
-}
 static inline int ftrace_graph_addr(unsigned long addr)
 {
 	return 1;
@@ -500,12 +526,12 @@
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
-extern struct pid *ftrace_pid_trace;
+extern struct list_head ftrace_pids;
 
 #ifdef CONFIG_FUNCTION_TRACER
 static inline int ftrace_trace_task(struct task_struct *task)
 {
-	if (!ftrace_pid_trace)
+	if (list_empty(&ftrace_pids))
 		return 1;
 
 	return test_tsk_trace_trace(task);
@@ -687,7 +713,6 @@
 	int			n_preds;
 	struct filter_pred	**preds;
 	char			*filter_string;
-	bool			no_reset;
 };
 
 struct event_subsystem {
@@ -699,22 +724,40 @@
 };
 
 struct filter_pred;
+struct regex;
 
 typedef int (*filter_pred_fn_t) (struct filter_pred *pred, void *event,
 				 int val1, int val2);
 
-struct filter_pred {
-	filter_pred_fn_t fn;
-	u64 val;
-	char str_val[MAX_FILTER_STR_VAL];
-	int str_len;
-	char *field_name;
-	int offset;
-	int not;
-	int op;
-	int pop_n;
+typedef int (*regex_match_func)(char *str, struct regex *r, int len);
+
+enum regex_type {
+	MATCH_FULL = 0,
+	MATCH_FRONT_ONLY,
+	MATCH_MIDDLE_ONLY,
+	MATCH_END_ONLY,
 };
 
+struct regex {
+	char			pattern[MAX_FILTER_STR_VAL];
+	int			len;
+	int			field_len;
+	regex_match_func	match;
+};
+
+struct filter_pred {
+	filter_pred_fn_t 	fn;
+	u64 			val;
+	struct regex		regex;
+	char 			*field_name;
+	int 			offset;
+	int 			not;
+	int 			op;
+	int 			pop_n;
+};
+
+extern enum regex_type
+filter_parse_regex(char *buff, int len, char **search, int *not);
 extern void print_event_filter(struct ftrace_event_call *call,
 			       struct trace_seq *s);
 extern int apply_event_filter(struct ftrace_event_call *call,
@@ -730,7 +773,8 @@
 		     struct ring_buffer *buffer,
 		     struct ring_buffer_event *event)
 {
-	if (unlikely(call->filter_active) && !filter_match_preds(call, rec)) {
+	if (unlikely(call->filter_active) &&
+	    !filter_match_preds(call->filter, rec)) {
 		ring_buffer_discard_commit(buffer, event);
 		return 1;
 	}
diff --git a/kernel/trace/trace_clock.c b/kernel/trace/trace_clock.c
index 20c5f92..878c03f 100644
--- a/kernel/trace/trace_clock.c
+++ b/kernel/trace/trace_clock.c
@@ -20,6 +20,8 @@
 #include <linux/ktime.h>
 #include <linux/trace_clock.h>
 
+#include "trace.h"
+
 /*
  * trace_clock_local(): the simplest and least coherent tracing clock.
  *
@@ -28,17 +30,17 @@
  */
 u64 notrace trace_clock_local(void)
 {
-	unsigned long flags;
 	u64 clock;
+	int resched;
 
 	/*
 	 * sched_clock() is an architecture implemented, fast, scalable,
 	 * lockless clock. It is not guaranteed to be coherent across
 	 * CPUs, nor across CPU idle events.
 	 */
-	raw_local_irq_save(flags);
+	resched = ftrace_preempt_disable();
 	clock = sched_clock();
-	raw_local_irq_restore(flags);
+	ftrace_preempt_enable(resched);
 
 	return clock;
 }
diff --git a/kernel/trace/trace_entries.h b/kernel/trace/trace_entries.h
index ead3d72..c16a08f 100644
--- a/kernel/trace/trace_entries.h
+++ b/kernel/trace/trace_entries.h
@@ -364,3 +364,19 @@
 	F_printk("type:%u call_site:%lx ptr:%p",
 		 __entry->type_id, __entry->call_site, __entry->ptr)
 );
+
+FTRACE_ENTRY(ksym_trace, ksym_trace_entry,
+
+	TRACE_KSYM,
+
+	F_STRUCT(
+		__field(	unsigned long,	ip			  )
+		__field(	unsigned char,	type			  )
+		__array(	char	     ,	cmd,	   TASK_COMM_LEN  )
+		__field(	unsigned long,  addr			  )
+	),
+
+	F_printk("ip: %pF type: %d ksym_name: %pS cmd: %s",
+		(void *)__entry->ip, (unsigned int)__entry->type,
+		(void *)__entry->addr,  __entry->cmd)
+);
diff --git a/kernel/trace/trace_event_profile.c b/kernel/trace/trace_event_profile.c
index 8d5c171..d9c60f8 100644
--- a/kernel/trace/trace_event_profile.c
+++ b/kernel/trace/trace_event_profile.c
@@ -8,17 +8,14 @@
 #include <linux/module.h>
 #include "trace.h"
 
-/*
- * We can't use a size but a type in alloc_percpu()
- * So let's create a dummy type that matches the desired size
- */
-typedef struct {char buf[FTRACE_MAX_PROFILE_SIZE];} profile_buf_t;
 
-char		*trace_profile_buf;
-EXPORT_SYMBOL_GPL(trace_profile_buf);
+char *perf_trace_buf;
+EXPORT_SYMBOL_GPL(perf_trace_buf);
 
-char		*trace_profile_buf_nmi;
-EXPORT_SYMBOL_GPL(trace_profile_buf_nmi);
+char *perf_trace_buf_nmi;
+EXPORT_SYMBOL_GPL(perf_trace_buf_nmi);
+
+typedef typeof(char [FTRACE_MAX_PROFILE_SIZE]) perf_trace_t ;
 
 /* Count the events in use (per event id, not per instance) */
 static int	total_profile_count;
@@ -32,20 +29,20 @@
 		return 0;
 
 	if (!total_profile_count) {
-		buf = (char *)alloc_percpu(profile_buf_t);
+		buf = (char *)alloc_percpu(perf_trace_t);
 		if (!buf)
 			goto fail_buf;
 
-		rcu_assign_pointer(trace_profile_buf, buf);
+		rcu_assign_pointer(perf_trace_buf, buf);
 
-		buf = (char *)alloc_percpu(profile_buf_t);
+		buf = (char *)alloc_percpu(perf_trace_t);
 		if (!buf)
 			goto fail_buf_nmi;
 
-		rcu_assign_pointer(trace_profile_buf_nmi, buf);
+		rcu_assign_pointer(perf_trace_buf_nmi, buf);
 	}
 
-	ret = event->profile_enable();
+	ret = event->profile_enable(event);
 	if (!ret) {
 		total_profile_count++;
 		return 0;
@@ -53,10 +50,10 @@
 
 fail_buf_nmi:
 	if (!total_profile_count) {
-		free_percpu(trace_profile_buf_nmi);
-		free_percpu(trace_profile_buf);
-		trace_profile_buf_nmi = NULL;
-		trace_profile_buf = NULL;
+		free_percpu(perf_trace_buf_nmi);
+		free_percpu(perf_trace_buf);
+		perf_trace_buf_nmi = NULL;
+		perf_trace_buf = NULL;
 	}
 fail_buf:
 	atomic_dec(&event->profile_count);
@@ -89,14 +86,14 @@
 	if (!atomic_add_negative(-1, &event->profile_count))
 		return;
 
-	event->profile_disable();
+	event->profile_disable(event);
 
 	if (!--total_profile_count) {
-		buf = trace_profile_buf;
-		rcu_assign_pointer(trace_profile_buf, NULL);
+		buf = perf_trace_buf;
+		rcu_assign_pointer(perf_trace_buf, NULL);
 
-		nmi_buf = trace_profile_buf_nmi;
-		rcu_assign_pointer(trace_profile_buf_nmi, NULL);
+		nmi_buf = perf_trace_buf_nmi;
+		rcu_assign_pointer(perf_trace_buf_nmi, NULL);
 
 		/*
 		 * Ensure every events in profiling have finished before
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index d128f65..1d18315 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -93,9 +93,7 @@
 }
 EXPORT_SYMBOL_GPL(trace_define_common_fields);
 
-#ifdef CONFIG_MODULES
-
-static void trace_destroy_fields(struct ftrace_event_call *call)
+void trace_destroy_fields(struct ftrace_event_call *call)
 {
 	struct ftrace_event_field *field, *next;
 
@@ -107,8 +105,6 @@
 	}
 }
 
-#endif /* CONFIG_MODULES */
-
 static void ftrace_event_enable_disable(struct ftrace_event_call *call,
 					int enable)
 {
@@ -117,14 +113,14 @@
 		if (call->enabled) {
 			call->enabled = 0;
 			tracing_stop_cmdline_record();
-			call->unregfunc(call->data);
+			call->unregfunc(call);
 		}
 		break;
 	case 1:
 		if (!call->enabled) {
 			call->enabled = 1;
 			tracing_start_cmdline_record();
-			call->regfunc(call->data);
+			call->regfunc(call);
 		}
 		break;
 	}
@@ -507,7 +503,7 @@
 #define FIELD(type, name)						\
 	sizeof(type) != sizeof(field.name) ? __bad_type_size() :	\
 	#type, "common_" #name, offsetof(typeof(field), name),		\
-		sizeof(field.name)
+		sizeof(field.name), is_signed_type(type)
 
 static int trace_write_header(struct trace_seq *s)
 {
@@ -515,17 +511,17 @@
 
 	/* struct trace_entry */
 	return trace_seq_printf(s,
-				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
-				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
-				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
-				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
-				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
-				"\n",
-				FIELD(unsigned short, type),
-				FIELD(unsigned char, flags),
-				FIELD(unsigned char, preempt_count),
-				FIELD(int, pid),
-				FIELD(int, lock_depth));
+			"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\tsigned:%u;\n"
+			"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\tsigned:%u;\n"
+			"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\tsigned:%u;\n"
+			"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\tsigned:%u;\n"
+			"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\tsigned:%u;\n"
+			"\n",
+			FIELD(unsigned short, type),
+			FIELD(unsigned char, flags),
+			FIELD(unsigned char, preempt_count),
+			FIELD(int, pid),
+			FIELD(int, lock_depth));
 }
 
 static ssize_t
@@ -878,9 +874,9 @@
 			   "'%s/filter' entry\n", name);
 	}
 
-	entry = trace_create_file("enable", 0644, system->entry,
-				  (void *)system->name,
-				  &ftrace_system_enable_fops);
+	trace_create_file("enable", 0644, system->entry,
+			  (void *)system->name,
+			  &ftrace_system_enable_fops);
 
 	return system->entry;
 }
@@ -892,7 +888,6 @@
 		 const struct file_operations *filter,
 		 const struct file_operations *format)
 {
-	struct dentry *entry;
 	int ret;
 
 	/*
@@ -910,12 +905,12 @@
 	}
 
 	if (call->regfunc)
-		entry = trace_create_file("enable", 0644, call->dir, call,
-					  enable);
+		trace_create_file("enable", 0644, call->dir, call,
+				  enable);
 
 	if (call->id && call->profile_enable)
-		entry = trace_create_file("id", 0444, call->dir, call,
-					  id);
+		trace_create_file("id", 0444, call->dir, call,
+		 		  id);
 
 	if (call->define_fields) {
 		ret = call->define_fields(call);
@@ -924,41 +919,60 @@
 				   " events/%s\n", call->name);
 			return ret;
 		}
-		entry = trace_create_file("filter", 0644, call->dir, call,
-					  filter);
+		trace_create_file("filter", 0644, call->dir, call,
+				  filter);
 	}
 
 	/* A trace may not want to export its format */
 	if (!call->show_format)
 		return 0;
 
-	entry = trace_create_file("format", 0444, call->dir, call,
-				  format);
+	trace_create_file("format", 0444, call->dir, call,
+			  format);
 
 	return 0;
 }
 
-#define for_each_event(event, start, end)			\
-	for (event = start;					\
-	     (unsigned long)event < (unsigned long)end;		\
-	     event++)
+static int __trace_add_event_call(struct ftrace_event_call *call)
+{
+	struct dentry *d_events;
+	int ret;
 
-#ifdef CONFIG_MODULES
+	if (!call->name)
+		return -EINVAL;
 
-static LIST_HEAD(ftrace_module_file_list);
+	if (call->raw_init) {
+		ret = call->raw_init(call);
+		if (ret < 0) {
+			if (ret != -ENOSYS)
+				pr_warning("Could not initialize trace "
+				"events/%s\n", call->name);
+			return ret;
+		}
+	}
 
-/*
- * Modules must own their file_operations to keep up with
- * reference counting.
- */
-struct ftrace_module_file_ops {
-	struct list_head		list;
-	struct module			*mod;
-	struct file_operations		id;
-	struct file_operations		enable;
-	struct file_operations		format;
-	struct file_operations		filter;
-};
+	d_events = event_trace_events_dir();
+	if (!d_events)
+		return -ENOENT;
+
+	ret = event_create_dir(call, d_events, &ftrace_event_id_fops,
+				&ftrace_enable_fops, &ftrace_event_filter_fops,
+				&ftrace_event_format_fops);
+	if (!ret)
+		list_add(&call->list, &ftrace_events);
+
+	return ret;
+}
+
+/* Add an additional event_call dynamically */
+int trace_add_event_call(struct ftrace_event_call *call)
+{
+	int ret;
+	mutex_lock(&event_mutex);
+	ret = __trace_add_event_call(call);
+	mutex_unlock(&event_mutex);
+	return ret;
+}
 
 static void remove_subsystem_dir(const char *name)
 {
@@ -986,6 +1000,53 @@
 	}
 }
 
+/*
+ * Must be called under locking both of event_mutex and trace_event_mutex.
+ */
+static void __trace_remove_event_call(struct ftrace_event_call *call)
+{
+	ftrace_event_enable_disable(call, 0);
+	if (call->event)
+		__unregister_ftrace_event(call->event);
+	debugfs_remove_recursive(call->dir);
+	list_del(&call->list);
+	trace_destroy_fields(call);
+	destroy_preds(call);
+	remove_subsystem_dir(call->system);
+}
+
+/* Remove an event_call */
+void trace_remove_event_call(struct ftrace_event_call *call)
+{
+	mutex_lock(&event_mutex);
+	down_write(&trace_event_mutex);
+	__trace_remove_event_call(call);
+	up_write(&trace_event_mutex);
+	mutex_unlock(&event_mutex);
+}
+
+#define for_each_event(event, start, end)			\
+	for (event = start;					\
+	     (unsigned long)event < (unsigned long)end;		\
+	     event++)
+
+#ifdef CONFIG_MODULES
+
+static LIST_HEAD(ftrace_module_file_list);
+
+/*
+ * Modules must own their file_operations to keep up with
+ * reference counting.
+ */
+struct ftrace_module_file_ops {
+	struct list_head		list;
+	struct module			*mod;
+	struct file_operations		id;
+	struct file_operations		enable;
+	struct file_operations		format;
+	struct file_operations		filter;
+};
+
 static struct ftrace_module_file_ops *
 trace_create_file_ops(struct module *mod)
 {
@@ -1043,7 +1104,7 @@
 		if (!call->name)
 			continue;
 		if (call->raw_init) {
-			ret = call->raw_init();
+			ret = call->raw_init(call);
 			if (ret < 0) {
 				if (ret != -ENOSYS)
 					pr_warning("Could not initialize trace "
@@ -1061,10 +1122,11 @@
 				return;
 		}
 		call->mod = mod;
-		list_add(&call->list, &ftrace_events);
-		event_create_dir(call, d_events,
-				 &file_ops->id, &file_ops->enable,
-				 &file_ops->filter, &file_ops->format);
+		ret = event_create_dir(call, d_events,
+				       &file_ops->id, &file_ops->enable,
+				       &file_ops->filter, &file_ops->format);
+		if (!ret)
+			list_add(&call->list, &ftrace_events);
 	}
 }
 
@@ -1078,14 +1140,7 @@
 	list_for_each_entry_safe(call, p, &ftrace_events, list) {
 		if (call->mod == mod) {
 			found = true;
-			ftrace_event_enable_disable(call, 0);
-			if (call->event)
-				__unregister_ftrace_event(call->event);
-			debugfs_remove_recursive(call->dir);
-			list_del(&call->list);
-			trace_destroy_fields(call);
-			destroy_preds(call);
-			remove_subsystem_dir(call->system);
+			__trace_remove_event_call(call);
 		}
 	}
 
@@ -1203,7 +1258,7 @@
 		if (!call->name)
 			continue;
 		if (call->raw_init) {
-			ret = call->raw_init();
+			ret = call->raw_init(call);
 			if (ret < 0) {
 				if (ret != -ENOSYS)
 					pr_warning("Could not initialize trace "
@@ -1211,10 +1266,12 @@
 				continue;
 			}
 		}
-		list_add(&call->list, &ftrace_events);
-		event_create_dir(call, d_events, &ftrace_event_id_fops,
-				 &ftrace_enable_fops, &ftrace_event_filter_fops,
-				 &ftrace_event_format_fops);
+		ret = event_create_dir(call, d_events, &ftrace_event_id_fops,
+				       &ftrace_enable_fops,
+				       &ftrace_event_filter_fops,
+				       &ftrace_event_format_fops);
+		if (!ret)
+			list_add(&call->list, &ftrace_events);
 	}
 
 	while (true) {
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 98a6cc5..50504cb 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -18,11 +18,10 @@
  * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
  */
 
-#include <linux/debugfs.h>
-#include <linux/uaccess.h>
 #include <linux/module.h>
 #include <linux/ctype.h>
 #include <linux/mutex.h>
+#include <linux/perf_event.h>
 
 #include "trace.h"
 #include "trace_output.h"
@@ -31,6 +30,7 @@
 {
 	OP_OR,
 	OP_AND,
+	OP_GLOB,
 	OP_NE,
 	OP_EQ,
 	OP_LT,
@@ -48,16 +48,17 @@
 };
 
 static struct filter_op filter_ops[] = {
-	{ OP_OR, "||", 1 },
-	{ OP_AND, "&&", 2 },
-	{ OP_NE, "!=", 4 },
-	{ OP_EQ, "==", 4 },
-	{ OP_LT, "<", 5 },
-	{ OP_LE, "<=", 5 },
-	{ OP_GT, ">", 5 },
-	{ OP_GE, ">=", 5 },
-	{ OP_NONE, "OP_NONE", 0 },
-	{ OP_OPEN_PAREN, "(", 0 },
+	{ OP_OR,	"||",		1 },
+	{ OP_AND,	"&&",		2 },
+	{ OP_GLOB,	"~",		4 },
+	{ OP_NE,	"!=",		4 },
+	{ OP_EQ,	"==",		4 },
+	{ OP_LT,	"<",		5 },
+	{ OP_LE,	"<=",		5 },
+	{ OP_GT,	">",		5 },
+	{ OP_GE,	">=",		5 },
+	{ OP_NONE,	"OP_NONE",	0 },
+	{ OP_OPEN_PAREN, "(",		0 },
 };
 
 enum {
@@ -197,9 +198,9 @@
 	char *addr = (char *)(event + pred->offset);
 	int cmp, match;
 
-	cmp = strncmp(addr, pred->str_val, pred->str_len);
+	cmp = pred->regex.match(addr, &pred->regex, pred->regex.field_len);
 
-	match = (!cmp) ^ pred->not;
+	match = cmp ^ pred->not;
 
 	return match;
 }
@@ -211,9 +212,9 @@
 	char **addr = (char **)(event + pred->offset);
 	int cmp, match;
 
-	cmp = strncmp(*addr, pred->str_val, pred->str_len);
+	cmp = pred->regex.match(*addr, &pred->regex, pred->regex.field_len);
 
-	match = (!cmp) ^ pred->not;
+	match = cmp ^ pred->not;
 
 	return match;
 }
@@ -237,9 +238,9 @@
 	char *addr = (char *)(event + str_loc);
 	int cmp, match;
 
-	cmp = strncmp(addr, pred->str_val, str_len);
+	cmp = pred->regex.match(addr, &pred->regex, str_len);
 
-	match = (!cmp) ^ pred->not;
+	match = cmp ^ pred->not;
 
 	return match;
 }
@@ -250,10 +251,121 @@
 	return 0;
 }
 
-/* return 1 if event matches, 0 otherwise (discard) */
-int filter_match_preds(struct ftrace_event_call *call, void *rec)
+/* Basic regex callbacks */
+static int regex_match_full(char *str, struct regex *r, int len)
 {
-	struct event_filter *filter = call->filter;
+	if (strncmp(str, r->pattern, len) == 0)
+		return 1;
+	return 0;
+}
+
+static int regex_match_front(char *str, struct regex *r, int len)
+{
+	if (strncmp(str, r->pattern, len) == 0)
+		return 1;
+	return 0;
+}
+
+static int regex_match_middle(char *str, struct regex *r, int len)
+{
+	if (strstr(str, r->pattern))
+		return 1;
+	return 0;
+}
+
+static int regex_match_end(char *str, struct regex *r, int len)
+{
+	char *ptr = strstr(str, r->pattern);
+
+	if (ptr && (ptr[r->len] == 0))
+		return 1;
+	return 0;
+}
+
+/**
+ * filter_parse_regex - parse a basic regex
+ * @buff:   the raw regex
+ * @len:    length of the regex
+ * @search: will point to the beginning of the string to compare
+ * @not:    tell whether the match will have to be inverted
+ *
+ * This passes in a buffer containing a regex and this function will
+ * set search to point to the search part of the buffer and
+ * return the type of search it is (see enum above).
+ * This does modify buff.
+ *
+ * Returns enum type.
+ *  search returns the pointer to use for comparison.
+ *  not returns 1 if buff started with a '!'
+ *     0 otherwise.
+ */
+enum regex_type filter_parse_regex(char *buff, int len, char **search, int *not)
+{
+	int type = MATCH_FULL;
+	int i;
+
+	if (buff[0] == '!') {
+		*not = 1;
+		buff++;
+		len--;
+	} else
+		*not = 0;
+
+	*search = buff;
+
+	for (i = 0; i < len; i++) {
+		if (buff[i] == '*') {
+			if (!i) {
+				*search = buff + 1;
+				type = MATCH_END_ONLY;
+			} else {
+				if (type == MATCH_END_ONLY)
+					type = MATCH_MIDDLE_ONLY;
+				else
+					type = MATCH_FRONT_ONLY;
+				buff[i] = 0;
+				break;
+			}
+		}
+	}
+
+	return type;
+}
+
+static void filter_build_regex(struct filter_pred *pred)
+{
+	struct regex *r = &pred->regex;
+	char *search;
+	enum regex_type type = MATCH_FULL;
+	int not = 0;
+
+	if (pred->op == OP_GLOB) {
+		type = filter_parse_regex(r->pattern, r->len, &search, &not);
+		r->len = strlen(search);
+		memmove(r->pattern, search, r->len+1);
+	}
+
+	switch (type) {
+	case MATCH_FULL:
+		r->match = regex_match_full;
+		break;
+	case MATCH_FRONT_ONLY:
+		r->match = regex_match_front;
+		break;
+	case MATCH_MIDDLE_ONLY:
+		r->match = regex_match_middle;
+		break;
+	case MATCH_END_ONLY:
+		r->match = regex_match_end;
+		break;
+	}
+
+	pred->not ^= not;
+}
+
+/* return 1 if event matches, 0 otherwise (discard) */
+int filter_match_preds(struct event_filter *filter, void *rec)
+{
 	int match, top = 0, val1 = 0, val2 = 0;
 	int stack[MAX_FILTER_PRED];
 	struct filter_pred *pred;
@@ -396,7 +508,7 @@
 {
 	kfree(pred->field_name);
 	pred->field_name = NULL;
-	pred->str_len = 0;
+	pred->regex.len = 0;
 }
 
 static int filter_set_pred(struct filter_pred *dest,
@@ -426,9 +538,8 @@
 		filter->preds[i]->fn = filter_pred_none;
 }
 
-void destroy_preds(struct ftrace_event_call *call)
+static void __free_preds(struct event_filter *filter)
 {
-	struct event_filter *filter = call->filter;
 	int i;
 
 	if (!filter)
@@ -441,21 +552,24 @@
 	kfree(filter->preds);
 	kfree(filter->filter_string);
 	kfree(filter);
-	call->filter = NULL;
 }
 
-static int init_preds(struct ftrace_event_call *call)
+void destroy_preds(struct ftrace_event_call *call)
+{
+	__free_preds(call->filter);
+	call->filter = NULL;
+	call->filter_active = 0;
+}
+
+static struct event_filter *__alloc_preds(void)
 {
 	struct event_filter *filter;
 	struct filter_pred *pred;
 	int i;
 
-	if (call->filter)
-		return 0;
-
-	filter = call->filter = kzalloc(sizeof(*filter), GFP_KERNEL);
-	if (!call->filter)
-		return -ENOMEM;
+	filter = kzalloc(sizeof(*filter), GFP_KERNEL);
+	if (!filter)
+		return ERR_PTR(-ENOMEM);
 
 	filter->n_preds = 0;
 
@@ -471,12 +585,24 @@
 		filter->preds[i] = pred;
 	}
 
-	return 0;
+	return filter;
 
 oom:
-	destroy_preds(call);
+	__free_preds(filter);
+	return ERR_PTR(-ENOMEM);
+}
 
-	return -ENOMEM;
+static int init_preds(struct ftrace_event_call *call)
+{
+	if (call->filter)
+		return 0;
+
+	call->filter_active = 0;
+	call->filter = __alloc_preds();
+	if (IS_ERR(call->filter))
+		return PTR_ERR(call->filter);
+
+	return 0;
 }
 
 static int init_subsystem_preds(struct event_subsystem *system)
@@ -499,14 +625,7 @@
 	return 0;
 }
 
-enum {
-	FILTER_DISABLE_ALL,
-	FILTER_INIT_NO_RESET,
-	FILTER_SKIP_NO_RESET,
-};
-
-static void filter_free_subsystem_preds(struct event_subsystem *system,
-					int flag)
+static void filter_free_subsystem_preds(struct event_subsystem *system)
 {
 	struct ftrace_event_call *call;
 
@@ -517,14 +636,6 @@
 		if (strcmp(call->system, system->name) != 0)
 			continue;
 
-		if (flag == FILTER_INIT_NO_RESET) {
-			call->filter->no_reset = false;
-			continue;
-		}
-
-		if (flag == FILTER_SKIP_NO_RESET && call->filter->no_reset)
-			continue;
-
 		filter_disable_preds(call);
 		remove_filter_string(call->filter);
 	}
@@ -532,10 +643,10 @@
 
 static int filter_add_pred_fn(struct filter_parse_state *ps,
 			      struct ftrace_event_call *call,
+			      struct event_filter *filter,
 			      struct filter_pred *pred,
 			      filter_pred_fn_t fn)
 {
-	struct event_filter *filter = call->filter;
 	int idx, err;
 
 	if (filter->n_preds == MAX_FILTER_PRED) {
@@ -550,7 +661,6 @@
 		return err;
 
 	filter->n_preds++;
-	call->filter_active = 1;
 
 	return 0;
 }
@@ -575,7 +685,10 @@
 
 static int is_legal_op(struct ftrace_event_field *field, int op)
 {
-	if (is_string_field(field) && (op != OP_EQ && op != OP_NE))
+	if (is_string_field(field) &&
+	    (op != OP_EQ && op != OP_NE && op != OP_GLOB))
+		return 0;
+	if (!is_string_field(field) && op == OP_GLOB)
 		return 0;
 
 	return 1;
@@ -626,6 +739,7 @@
 
 static int filter_add_pred(struct filter_parse_state *ps,
 			   struct ftrace_event_call *call,
+			   struct event_filter *filter,
 			   struct filter_pred *pred,
 			   bool dry_run)
 {
@@ -660,21 +774,22 @@
 	}
 
 	if (is_string_field(field)) {
-		pred->str_len = field->size;
+		filter_build_regex(pred);
 
-		if (field->filter_type == FILTER_STATIC_STRING)
+		if (field->filter_type == FILTER_STATIC_STRING) {
 			fn = filter_pred_string;
-		else if (field->filter_type == FILTER_DYN_STRING)
+			pred->regex.field_len = field->size;
+		} else if (field->filter_type == FILTER_DYN_STRING)
 			fn = filter_pred_strloc;
 		else {
 			fn = filter_pred_pchar;
-			pred->str_len = strlen(pred->str_val);
+			pred->regex.field_len = strlen(pred->regex.pattern);
 		}
 	} else {
 		if (field->is_signed)
-			ret = strict_strtoll(pred->str_val, 0, &val);
+			ret = strict_strtoll(pred->regex.pattern, 0, &val);
 		else
-			ret = strict_strtoull(pred->str_val, 0, &val);
+			ret = strict_strtoull(pred->regex.pattern, 0, &val);
 		if (ret) {
 			parse_error(ps, FILT_ERR_ILLEGAL_INTVAL, 0);
 			return -EINVAL;
@@ -694,45 +809,7 @@
 
 add_pred_fn:
 	if (!dry_run)
-		return filter_add_pred_fn(ps, call, pred, fn);
-	return 0;
-}
-
-static int filter_add_subsystem_pred(struct filter_parse_state *ps,
-				     struct event_subsystem *system,
-				     struct filter_pred *pred,
-				     char *filter_string,
-				     bool dry_run)
-{
-	struct ftrace_event_call *call;
-	int err = 0;
-	bool fail = true;
-
-	list_for_each_entry(call, &ftrace_events, list) {
-
-		if (!call->define_fields)
-			continue;
-
-		if (strcmp(call->system, system->name))
-			continue;
-
-		if (call->filter->no_reset)
-			continue;
-
-		err = filter_add_pred(ps, call, pred, dry_run);
-		if (err)
-			call->filter->no_reset = true;
-		else
-			fail = false;
-
-		if (!dry_run)
-			replace_filter_string(call->filter, filter_string);
-	}
-
-	if (fail) {
-		parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
-		return err;
-	}
+		return filter_add_pred_fn(ps, call, filter, pred, fn);
 	return 0;
 }
 
@@ -1045,8 +1122,8 @@
 		return NULL;
 	}
 
-	strcpy(pred->str_val, operand2);
-	pred->str_len = strlen(operand2);
+	strcpy(pred->regex.pattern, operand2);
+	pred->regex.len = strlen(pred->regex.pattern);
 
 	pred->op = op;
 
@@ -1090,8 +1167,8 @@
 	return 0;
 }
 
-static int replace_preds(struct event_subsystem *system,
-			 struct ftrace_event_call *call,
+static int replace_preds(struct ftrace_event_call *call,
+			 struct event_filter *filter,
 			 struct filter_parse_state *ps,
 			 char *filter_string,
 			 bool dry_run)
@@ -1138,11 +1215,7 @@
 add_pred:
 		if (!pred)
 			return -ENOMEM;
-		if (call)
-			err = filter_add_pred(ps, call, pred, false);
-		else
-			err = filter_add_subsystem_pred(ps, system, pred,
-						filter_string, dry_run);
+		err = filter_add_pred(ps, call, filter, pred, dry_run);
 		filter_free_pred(pred);
 		if (err)
 			return err;
@@ -1153,10 +1226,50 @@
 	return 0;
 }
 
+static int replace_system_preds(struct event_subsystem *system,
+				struct filter_parse_state *ps,
+				char *filter_string)
+{
+	struct ftrace_event_call *call;
+	bool fail = true;
+	int err;
+
+	list_for_each_entry(call, &ftrace_events, list) {
+		struct event_filter *filter = call->filter;
+
+		if (!call->define_fields)
+			continue;
+
+		if (strcmp(call->system, system->name) != 0)
+			continue;
+
+		/* try to see if the filter can be applied */
+		err = replace_preds(call, filter, ps, filter_string, true);
+		if (err)
+			continue;
+
+		/* really apply the filter */
+		filter_disable_preds(call);
+		err = replace_preds(call, filter, ps, filter_string, false);
+		if (err)
+			filter_disable_preds(call);
+		else {
+			call->filter_active = 1;
+			replace_filter_string(filter, filter_string);
+		}
+		fail = false;
+	}
+
+	if (fail) {
+		parse_error(ps, FILT_ERR_BAD_SUBSYS_FILTER, 0);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 int apply_event_filter(struct ftrace_event_call *call, char *filter_string)
 {
 	int err;
-
 	struct filter_parse_state *ps;
 
 	mutex_lock(&event_mutex);
@@ -1168,8 +1281,7 @@
 	if (!strcmp(strstrip(filter_string), "0")) {
 		filter_disable_preds(call);
 		remove_filter_string(call->filter);
-		mutex_unlock(&event_mutex);
-		return 0;
+		goto out_unlock;
 	}
 
 	err = -ENOMEM;
@@ -1187,10 +1299,11 @@
 		goto out;
 	}
 
-	err = replace_preds(NULL, call, ps, filter_string, false);
+	err = replace_preds(call, call->filter, ps, filter_string, false);
 	if (err)
 		append_filter_err(ps, call->filter);
-
+	else
+		call->filter_active = 1;
 out:
 	filter_opstack_clear(ps);
 	postfix_clear(ps);
@@ -1205,7 +1318,6 @@
 				 char *filter_string)
 {
 	int err;
-
 	struct filter_parse_state *ps;
 
 	mutex_lock(&event_mutex);
@@ -1215,10 +1327,9 @@
 		goto out_unlock;
 
 	if (!strcmp(strstrip(filter_string), "0")) {
-		filter_free_subsystem_preds(system, FILTER_DISABLE_ALL);
+		filter_free_subsystem_preds(system);
 		remove_filter_string(system->filter);
-		mutex_unlock(&event_mutex);
-		return 0;
+		goto out_unlock;
 	}
 
 	err = -ENOMEM;
@@ -1235,23 +1346,9 @@
 		goto out;
 	}
 
-	filter_free_subsystem_preds(system, FILTER_INIT_NO_RESET);
-
-	/* try to see the filter can be applied to which events */
-	err = replace_preds(system, NULL, ps, filter_string, true);
-	if (err) {
+	err = replace_system_preds(system, ps, filter_string);
+	if (err)
 		append_filter_err(ps, system->filter);
-		goto out;
-	}
-
-	filter_free_subsystem_preds(system, FILTER_SKIP_NO_RESET);
-
-	/* really apply the filter to the events */
-	err = replace_preds(system, NULL, ps, filter_string, false);
-	if (err) {
-		append_filter_err(ps, system->filter);
-		filter_free_subsystem_preds(system, 2);
-	}
 
 out:
 	filter_opstack_clear(ps);
@@ -1263,3 +1360,73 @@
 	return err;
 }
 
+#ifdef CONFIG_EVENT_PROFILE
+
+void ftrace_profile_free_filter(struct perf_event *event)
+{
+	struct event_filter *filter = event->filter;
+
+	event->filter = NULL;
+	__free_preds(filter);
+}
+
+int ftrace_profile_set_filter(struct perf_event *event, int event_id,
+			      char *filter_str)
+{
+	int err;
+	struct event_filter *filter;
+	struct filter_parse_state *ps;
+	struct ftrace_event_call *call = NULL;
+
+	mutex_lock(&event_mutex);
+
+	list_for_each_entry(call, &ftrace_events, list) {
+		if (call->id == event_id)
+			break;
+	}
+
+	err = -EINVAL;
+	if (!call)
+		goto out_unlock;
+
+	err = -EEXIST;
+	if (event->filter)
+		goto out_unlock;
+
+	filter = __alloc_preds();
+	if (IS_ERR(filter)) {
+		err = PTR_ERR(filter);
+		goto out_unlock;
+	}
+
+	err = -ENOMEM;
+	ps = kzalloc(sizeof(*ps), GFP_KERNEL);
+	if (!ps)
+		goto free_preds;
+
+	parse_init(ps, filter_ops, filter_str);
+	err = filter_parse(ps);
+	if (err)
+		goto free_ps;
+
+	err = replace_preds(call, filter, ps, filter_str, false);
+	if (!err)
+		event->filter = filter;
+
+free_ps:
+	filter_opstack_clear(ps);
+	postfix_clear(ps);
+	kfree(ps);
+
+free_preds:
+	if (err)
+		__free_preds(filter);
+
+out_unlock:
+	mutex_unlock(&event_mutex);
+
+	return err;
+}
+
+#endif /* CONFIG_EVENT_PROFILE */
+
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index 9753fcc..dff8c84 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -48,11 +48,11 @@
 struct ____ftrace_##name {					\
 	tstruct							\
 };								\
-static void __used ____ftrace_check_##name(void)		\
+static void __always_unused ____ftrace_check_##name(void)	\
 {								\
 	struct ____ftrace_##name *__entry = NULL;		\
 								\
-	/* force cmpile-time check on F_printk() */		\
+	/* force compile-time check on F_printk() */		\
 	printk(print);						\
 }
 
@@ -66,44 +66,47 @@
 #undef __field
 #define __field(type, item)						\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
-			       "offset:%zu;\tsize:%zu;\n",		\
+			       "offset:%zu;\tsize:%zu;\tsigned:%u;\n",	\
 			       offsetof(typeof(field), item),		\
-			       sizeof(field.item));			\
+			       sizeof(field.item), is_signed_type(type)); \
 	if (!ret)							\
 		return 0;
 
 #undef __field_desc
 #define __field_desc(type, container, item)				\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
-			       "offset:%zu;\tsize:%zu;\n",		\
+			       "offset:%zu;\tsize:%zu;\tsigned:%u;\n",	\
 			       offsetof(typeof(field), container.item),	\
-			       sizeof(field.container.item));		\
+			       sizeof(field.container.item),		\
+			       is_signed_type(type));			\
 	if (!ret)							\
 		return 0;
 
 #undef __array
 #define __array(type, item, len)					\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
-			       "offset:%zu;\tsize:%zu;\n",		\
-			       offsetof(typeof(field), item),	\
-			       sizeof(field.item));		\
+			       "offset:%zu;\tsize:%zu;\tsigned:%u;\n",	\
+			       offsetof(typeof(field), item),		\
+			       sizeof(field.item), is_signed_type(type)); \
 	if (!ret)							\
 		return 0;
 
 #undef __array_desc
 #define __array_desc(type, container, item, len)			\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item "[" #len "];\t" \
-			       "offset:%zu;\tsize:%zu;\n",		\
+			       "offset:%zu;\tsize:%zu;\tsigned:%u;\n",	\
 			       offsetof(typeof(field), container.item),	\
-			       sizeof(field.container.item));		\
+			       sizeof(field.container.item),		\
+			       is_signed_type(type));			\
 	if (!ret)							\
 		return 0;
 
 #undef __dynamic_array
 #define __dynamic_array(type, item)					\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
-			       "offset:%zu;\tsize:0;\n",		\
-			       offsetof(typeof(field), item));		\
+			       "offset:%zu;\tsize:0;\tsigned:%u;\n",	\
+			       offsetof(typeof(field), item),		\
+			       is_signed_type(type));			\
 	if (!ret)							\
 		return 0;
 
@@ -131,7 +134,6 @@
 
 #include "trace_entries.h"
 
-
 #undef __field
 #define __field(type, item)						\
 	ret = trace_define_field(event_call, #type, #item,		\
@@ -193,6 +195,11 @@
 
 #include "trace_entries.h"
 
+static int ftrace_raw_init_event(struct ftrace_event_call *call)
+{
+	INIT_LIST_HEAD(&call->fields);
+	return 0;
+}
 
 #undef __field
 #define __field(type, item)
@@ -211,7 +218,6 @@
 
 #undef FTRACE_ENTRY
 #define FTRACE_ENTRY(call, struct_name, type, tstruct, print)		\
-static int ftrace_raw_init_event_##call(void);				\
 									\
 struct ftrace_event_call __used						\
 __attribute__((__aligned__(4)))						\
@@ -219,14 +225,9 @@
 	.name			= #call,				\
 	.id			= type,					\
 	.system			= __stringify(TRACE_SYSTEM),		\
-	.raw_init		= ftrace_raw_init_event_##call,		\
+	.raw_init		= ftrace_raw_init_event,		\
 	.show_format		= ftrace_format_##call,			\
 	.define_fields		= ftrace_define_fields_##call,		\
 };									\
-static int ftrace_raw_init_event_##call(void)				\
-{									\
-	INIT_LIST_HEAD(&event_##call.fields);				\
-	return 0;							\
-}									\
 
 #include "trace_entries.h"
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
new file mode 100644
index 0000000..aff5f80
--- /dev/null
+++ b/kernel/trace/trace_kprobe.c
@@ -0,0 +1,1523 @@
+/*
+ * Kprobes-based tracing events
+ *
+ * Created by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/kprobes.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <linux/debugfs.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/ptrace.h>
+#include <linux/perf_event.h>
+
+#include "trace.h"
+#include "trace_output.h"
+
+#define MAX_TRACE_ARGS 128
+#define MAX_ARGSTR_LEN 63
+#define MAX_EVENT_NAME_LEN 64
+#define KPROBE_EVENT_SYSTEM "kprobes"
+
+/* Reserved field names */
+#define FIELD_STRING_IP "__probe_ip"
+#define FIELD_STRING_NARGS "__probe_nargs"
+#define FIELD_STRING_RETIP "__probe_ret_ip"
+#define FIELD_STRING_FUNC "__probe_func"
+
+const char *reserved_field_names[] = {
+	"common_type",
+	"common_flags",
+	"common_preempt_count",
+	"common_pid",
+	"common_tgid",
+	"common_lock_depth",
+	FIELD_STRING_IP,
+	FIELD_STRING_NARGS,
+	FIELD_STRING_RETIP,
+	FIELD_STRING_FUNC,
+};
+
+struct fetch_func {
+	unsigned long (*func)(struct pt_regs *, void *);
+	void *data;
+};
+
+static __kprobes unsigned long call_fetch(struct fetch_func *f,
+					  struct pt_regs *regs)
+{
+	return f->func(regs, f->data);
+}
+
+/* fetch handlers */
+static __kprobes unsigned long fetch_register(struct pt_regs *regs,
+					      void *offset)
+{
+	return regs_get_register(regs, (unsigned int)((unsigned long)offset));
+}
+
+static __kprobes unsigned long fetch_stack(struct pt_regs *regs,
+					   void *num)
+{
+	return regs_get_kernel_stack_nth(regs,
+					 (unsigned int)((unsigned long)num));
+}
+
+static __kprobes unsigned long fetch_memory(struct pt_regs *regs, void *addr)
+{
+	unsigned long retval;
+
+	if (probe_kernel_address(addr, retval))
+		return 0;
+	return retval;
+}
+
+static __kprobes unsigned long fetch_argument(struct pt_regs *regs, void *num)
+{
+	return regs_get_argument_nth(regs, (unsigned int)((unsigned long)num));
+}
+
+static __kprobes unsigned long fetch_retvalue(struct pt_regs *regs,
+					      void *dummy)
+{
+	return regs_return_value(regs);
+}
+
+static __kprobes unsigned long fetch_stack_address(struct pt_regs *regs,
+						   void *dummy)
+{
+	return kernel_stack_pointer(regs);
+}
+
+/* Memory fetching by symbol */
+struct symbol_cache {
+	char *symbol;
+	long offset;
+	unsigned long addr;
+};
+
+static unsigned long update_symbol_cache(struct symbol_cache *sc)
+{
+	sc->addr = (unsigned long)kallsyms_lookup_name(sc->symbol);
+	if (sc->addr)
+		sc->addr += sc->offset;
+	return sc->addr;
+}
+
+static void free_symbol_cache(struct symbol_cache *sc)
+{
+	kfree(sc->symbol);
+	kfree(sc);
+}
+
+static struct symbol_cache *alloc_symbol_cache(const char *sym, long offset)
+{
+	struct symbol_cache *sc;
+
+	if (!sym || strlen(sym) == 0)
+		return NULL;
+	sc = kzalloc(sizeof(struct symbol_cache), GFP_KERNEL);
+	if (!sc)
+		return NULL;
+
+	sc->symbol = kstrdup(sym, GFP_KERNEL);
+	if (!sc->symbol) {
+		kfree(sc);
+		return NULL;
+	}
+	sc->offset = offset;
+
+	update_symbol_cache(sc);
+	return sc;
+}
+
+static __kprobes unsigned long fetch_symbol(struct pt_regs *regs, void *data)
+{
+	struct symbol_cache *sc = data;
+
+	if (sc->addr)
+		return fetch_memory(regs, (void *)sc->addr);
+	else
+		return 0;
+}
+
+/* Special indirect memory access interface */
+struct indirect_fetch_data {
+	struct fetch_func orig;
+	long offset;
+};
+
+static __kprobes unsigned long fetch_indirect(struct pt_regs *regs, void *data)
+{
+	struct indirect_fetch_data *ind = data;
+	unsigned long addr;
+
+	addr = call_fetch(&ind->orig, regs);
+	if (addr) {
+		addr += ind->offset;
+		return fetch_memory(regs, (void *)addr);
+	} else
+		return 0;
+}
+
+static __kprobes void free_indirect_fetch_data(struct indirect_fetch_data *data)
+{
+	if (data->orig.func == fetch_indirect)
+		free_indirect_fetch_data(data->orig.data);
+	else if (data->orig.func == fetch_symbol)
+		free_symbol_cache(data->orig.data);
+	kfree(data);
+}
+
+/**
+ * Kprobe event core functions
+ */
+
+struct probe_arg {
+	struct fetch_func	fetch;
+	const char		*name;
+};
+
+/* Flags for trace_probe */
+#define TP_FLAG_TRACE	1
+#define TP_FLAG_PROFILE	2
+
+struct trace_probe {
+	struct list_head	list;
+	struct kretprobe	rp;	/* Use rp.kp for kprobe use */
+	unsigned long 		nhit;
+	unsigned int		flags;	/* For TP_FLAG_* */
+	const char		*symbol;	/* symbol name */
+	struct ftrace_event_call	call;
+	struct trace_event		event;
+	unsigned int		nr_args;
+	struct probe_arg	args[];
+};
+
+#define SIZEOF_TRACE_PROBE(n)			\
+	(offsetof(struct trace_probe, args) +	\
+	(sizeof(struct probe_arg) * (n)))
+
+static __kprobes int probe_is_return(struct trace_probe *tp)
+{
+	return tp->rp.handler != NULL;
+}
+
+static __kprobes const char *probe_symbol(struct trace_probe *tp)
+{
+	return tp->symbol ? tp->symbol : "unknown";
+}
+
+static int probe_arg_string(char *buf, size_t n, struct fetch_func *ff)
+{
+	int ret = -EINVAL;
+
+	if (ff->func == fetch_argument)
+		ret = snprintf(buf, n, "$arg%lu", (unsigned long)ff->data);
+	else if (ff->func == fetch_register) {
+		const char *name;
+		name = regs_query_register_name((unsigned int)((long)ff->data));
+		ret = snprintf(buf, n, "%%%s", name);
+	} else if (ff->func == fetch_stack)
+		ret = snprintf(buf, n, "$stack%lu", (unsigned long)ff->data);
+	else if (ff->func == fetch_memory)
+		ret = snprintf(buf, n, "@0x%p", ff->data);
+	else if (ff->func == fetch_symbol) {
+		struct symbol_cache *sc = ff->data;
+		if (sc->offset)
+			ret = snprintf(buf, n, "@%s%+ld", sc->symbol,
+					sc->offset);
+		else
+			ret = snprintf(buf, n, "@%s", sc->symbol);
+	} else if (ff->func == fetch_retvalue)
+		ret = snprintf(buf, n, "$retval");
+	else if (ff->func == fetch_stack_address)
+		ret = snprintf(buf, n, "$stack");
+	else if (ff->func == fetch_indirect) {
+		struct indirect_fetch_data *id = ff->data;
+		size_t l = 0;
+		ret = snprintf(buf, n, "%+ld(", id->offset);
+		if (ret >= n)
+			goto end;
+		l += ret;
+		ret = probe_arg_string(buf + l, n - l, &id->orig);
+		if (ret < 0)
+			goto end;
+		l += ret;
+		ret = snprintf(buf + l, n - l, ")");
+		ret += l;
+	}
+end:
+	if (ret >= n)
+		return -ENOSPC;
+	return ret;
+}
+
+static int register_probe_event(struct trace_probe *tp);
+static void unregister_probe_event(struct trace_probe *tp);
+
+static DEFINE_MUTEX(probe_lock);
+static LIST_HEAD(probe_list);
+
+static int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs);
+static int kretprobe_dispatcher(struct kretprobe_instance *ri,
+				struct pt_regs *regs);
+
+/*
+ * Allocate new trace_probe and initialize it (including kprobes).
+ */
+static struct trace_probe *alloc_trace_probe(const char *group,
+					     const char *event,
+					     void *addr,
+					     const char *symbol,
+					     unsigned long offs,
+					     int nargs, int is_return)
+{
+	struct trace_probe *tp;
+
+	tp = kzalloc(SIZEOF_TRACE_PROBE(nargs), GFP_KERNEL);
+	if (!tp)
+		return ERR_PTR(-ENOMEM);
+
+	if (symbol) {
+		tp->symbol = kstrdup(symbol, GFP_KERNEL);
+		if (!tp->symbol)
+			goto error;
+		tp->rp.kp.symbol_name = tp->symbol;
+		tp->rp.kp.offset = offs;
+	} else
+		tp->rp.kp.addr = addr;
+
+	if (is_return)
+		tp->rp.handler = kretprobe_dispatcher;
+	else
+		tp->rp.kp.pre_handler = kprobe_dispatcher;
+
+	if (!event)
+		goto error;
+	tp->call.name = kstrdup(event, GFP_KERNEL);
+	if (!tp->call.name)
+		goto error;
+
+	if (!group)
+		goto error;
+	tp->call.system = kstrdup(group, GFP_KERNEL);
+	if (!tp->call.system)
+		goto error;
+
+	INIT_LIST_HEAD(&tp->list);
+	return tp;
+error:
+	kfree(tp->call.name);
+	kfree(tp->symbol);
+	kfree(tp);
+	return ERR_PTR(-ENOMEM);
+}
+
+static void free_probe_arg(struct probe_arg *arg)
+{
+	if (arg->fetch.func == fetch_symbol)
+		free_symbol_cache(arg->fetch.data);
+	else if (arg->fetch.func == fetch_indirect)
+		free_indirect_fetch_data(arg->fetch.data);
+	kfree(arg->name);
+}
+
+static void free_trace_probe(struct trace_probe *tp)
+{
+	int i;
+
+	for (i = 0; i < tp->nr_args; i++)
+		free_probe_arg(&tp->args[i]);
+
+	kfree(tp->call.system);
+	kfree(tp->call.name);
+	kfree(tp->symbol);
+	kfree(tp);
+}
+
+static struct trace_probe *find_probe_event(const char *event,
+					    const char *group)
+{
+	struct trace_probe *tp;
+
+	list_for_each_entry(tp, &probe_list, list)
+		if (strcmp(tp->call.name, event) == 0 &&
+		    strcmp(tp->call.system, group) == 0)
+			return tp;
+	return NULL;
+}
+
+/* Unregister a trace_probe and probe_event: call with locking probe_lock */
+static void unregister_trace_probe(struct trace_probe *tp)
+{
+	if (probe_is_return(tp))
+		unregister_kretprobe(&tp->rp);
+	else
+		unregister_kprobe(&tp->rp.kp);
+	list_del(&tp->list);
+	unregister_probe_event(tp);
+}
+
+/* Register a trace_probe and probe_event */
+static int register_trace_probe(struct trace_probe *tp)
+{
+	struct trace_probe *old_tp;
+	int ret;
+
+	mutex_lock(&probe_lock);
+
+	/* register as an event */
+	old_tp = find_probe_event(tp->call.name, tp->call.system);
+	if (old_tp) {
+		/* delete old event */
+		unregister_trace_probe(old_tp);
+		free_trace_probe(old_tp);
+	}
+	ret = register_probe_event(tp);
+	if (ret) {
+		pr_warning("Faild to register probe event(%d)\n", ret);
+		goto end;
+	}
+
+	tp->rp.kp.flags |= KPROBE_FLAG_DISABLED;
+	if (probe_is_return(tp))
+		ret = register_kretprobe(&tp->rp);
+	else
+		ret = register_kprobe(&tp->rp.kp);
+
+	if (ret) {
+		pr_warning("Could not insert probe(%d)\n", ret);
+		if (ret == -EILSEQ) {
+			pr_warning("Probing address(0x%p) is not an "
+				   "instruction boundary.\n",
+				   tp->rp.kp.addr);
+			ret = -EINVAL;
+		}
+		unregister_probe_event(tp);
+	} else
+		list_add_tail(&tp->list, &probe_list);
+end:
+	mutex_unlock(&probe_lock);
+	return ret;
+}
+
+/* Split symbol and offset. */
+static int split_symbol_offset(char *symbol, unsigned long *offset)
+{
+	char *tmp;
+	int ret;
+
+	if (!offset)
+		return -EINVAL;
+
+	tmp = strchr(symbol, '+');
+	if (tmp) {
+		/* skip sign because strict_strtol doesn't accept '+' */
+		ret = strict_strtoul(tmp + 1, 0, offset);
+		if (ret)
+			return ret;
+		*tmp = '\0';
+	} else
+		*offset = 0;
+	return 0;
+}
+
+#define PARAM_MAX_ARGS 16
+#define PARAM_MAX_STACK (THREAD_SIZE / sizeof(unsigned long))
+
+static int parse_probe_vars(char *arg, struct fetch_func *ff, int is_return)
+{
+	int ret = 0;
+	unsigned long param;
+
+	if (strcmp(arg, "retval") == 0) {
+		if (is_return) {
+			ff->func = fetch_retvalue;
+			ff->data = NULL;
+		} else
+			ret = -EINVAL;
+	} else if (strncmp(arg, "stack", 5) == 0) {
+		if (arg[5] == '\0') {
+			ff->func = fetch_stack_address;
+			ff->data = NULL;
+		} else if (isdigit(arg[5])) {
+			ret = strict_strtoul(arg + 5, 10, &param);
+			if (ret || param > PARAM_MAX_STACK)
+				ret = -EINVAL;
+			else {
+				ff->func = fetch_stack;
+				ff->data = (void *)param;
+			}
+		} else
+			ret = -EINVAL;
+	} else if (strncmp(arg, "arg", 3) == 0 && isdigit(arg[3])) {
+		ret = strict_strtoul(arg + 3, 10, &param);
+		if (ret || param > PARAM_MAX_ARGS)
+			ret = -EINVAL;
+		else {
+			ff->func = fetch_argument;
+			ff->data = (void *)param;
+		}
+	} else
+		ret = -EINVAL;
+	return ret;
+}
+
+/* Recursive argument parser */
+static int __parse_probe_arg(char *arg, struct fetch_func *ff, int is_return)
+{
+	int ret = 0;
+	unsigned long param;
+	long offset;
+	char *tmp;
+
+	switch (arg[0]) {
+	case '$':
+		ret = parse_probe_vars(arg + 1, ff, is_return);
+		break;
+	case '%':	/* named register */
+		ret = regs_query_register_offset(arg + 1);
+		if (ret >= 0) {
+			ff->func = fetch_register;
+			ff->data = (void *)(unsigned long)ret;
+			ret = 0;
+		}
+		break;
+	case '@':	/* memory or symbol */
+		if (isdigit(arg[1])) {
+			ret = strict_strtoul(arg + 1, 0, &param);
+			if (ret)
+				break;
+			ff->func = fetch_memory;
+			ff->data = (void *)param;
+		} else {
+			ret = split_symbol_offset(arg + 1, &offset);
+			if (ret)
+				break;
+			ff->data = alloc_symbol_cache(arg + 1, offset);
+			if (ff->data)
+				ff->func = fetch_symbol;
+			else
+				ret = -EINVAL;
+		}
+		break;
+	case '+':	/* indirect memory */
+	case '-':
+		tmp = strchr(arg, '(');
+		if (!tmp) {
+			ret = -EINVAL;
+			break;
+		}
+		*tmp = '\0';
+		ret = strict_strtol(arg + 1, 0, &offset);
+		if (ret)
+			break;
+		if (arg[0] == '-')
+			offset = -offset;
+		arg = tmp + 1;
+		tmp = strrchr(arg, ')');
+		if (tmp) {
+			struct indirect_fetch_data *id;
+			*tmp = '\0';
+			id = kzalloc(sizeof(struct indirect_fetch_data),
+				     GFP_KERNEL);
+			if (!id)
+				return -ENOMEM;
+			id->offset = offset;
+			ret = __parse_probe_arg(arg, &id->orig, is_return);
+			if (ret)
+				kfree(id);
+			else {
+				ff->func = fetch_indirect;
+				ff->data = (void *)id;
+			}
+		} else
+			ret = -EINVAL;
+		break;
+	default:
+		/* TODO: support custom handler */
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+/* String length checking wrapper */
+static int parse_probe_arg(char *arg, struct fetch_func *ff, int is_return)
+{
+	if (strlen(arg) > MAX_ARGSTR_LEN) {
+		pr_info("Argument is too long.: %s\n",  arg);
+		return -ENOSPC;
+	}
+	return __parse_probe_arg(arg, ff, is_return);
+}
+
+/* Return 1 if name is reserved or already used by another argument */
+static int conflict_field_name(const char *name,
+			       struct probe_arg *args, int narg)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(reserved_field_names); i++)
+		if (strcmp(reserved_field_names[i], name) == 0)
+			return 1;
+	for (i = 0; i < narg; i++)
+		if (strcmp(args[i].name, name) == 0)
+			return 1;
+	return 0;
+}
+
+static int create_trace_probe(int argc, char **argv)
+{
+	/*
+	 * Argument syntax:
+	 *  - Add kprobe: p[:[GRP/]EVENT] KSYM[+OFFS]|KADDR [FETCHARGS]
+	 *  - Add kretprobe: r[:[GRP/]EVENT] KSYM[+0] [FETCHARGS]
+	 * Fetch args:
+	 *  $argN	: fetch Nth of function argument. (N:0-)
+	 *  $retval	: fetch return value
+	 *  $stack	: fetch stack address
+	 *  $stackN	: fetch Nth of stack (N:0-)
+	 *  @ADDR	: fetch memory at ADDR (ADDR should be in kernel)
+	 *  @SYM[+|-offs] : fetch memory at SYM +|- offs (SYM is a data symbol)
+	 *  %REG	: fetch register REG
+	 * Indirect memory fetch:
+	 *  +|-offs(ARG) : fetch memory at ARG +|- offs address.
+	 * Alias name of args:
+	 *  NAME=FETCHARG : set NAME as alias of FETCHARG.
+	 */
+	struct trace_probe *tp;
+	int i, ret = 0;
+	int is_return = 0;
+	char *symbol = NULL, *event = NULL, *arg = NULL, *group = NULL;
+	unsigned long offset = 0;
+	void *addr = NULL;
+	char buf[MAX_EVENT_NAME_LEN];
+
+	if (argc < 2) {
+		pr_info("Probe point is not specified.\n");
+		return -EINVAL;
+	}
+
+	if (argv[0][0] == 'p')
+		is_return = 0;
+	else if (argv[0][0] == 'r')
+		is_return = 1;
+	else {
+		pr_info("Probe definition must be started with 'p' or 'r'.\n");
+		return -EINVAL;
+	}
+
+	if (argv[0][1] == ':') {
+		event = &argv[0][2];
+		if (strchr(event, '/')) {
+			group = event;
+			event = strchr(group, '/') + 1;
+			event[-1] = '\0';
+			if (strlen(group) == 0) {
+				pr_info("Group name is not specifiled\n");
+				return -EINVAL;
+			}
+		}
+		if (strlen(event) == 0) {
+			pr_info("Event name is not specifiled\n");
+			return -EINVAL;
+		}
+	}
+
+	if (isdigit(argv[1][0])) {
+		if (is_return) {
+			pr_info("Return probe point must be a symbol.\n");
+			return -EINVAL;
+		}
+		/* an address specified */
+		ret = strict_strtoul(&argv[0][2], 0, (unsigned long *)&addr);
+		if (ret) {
+			pr_info("Failed to parse address.\n");
+			return ret;
+		}
+	} else {
+		/* a symbol specified */
+		symbol = argv[1];
+		/* TODO: support .init module functions */
+		ret = split_symbol_offset(symbol, &offset);
+		if (ret) {
+			pr_info("Failed to parse symbol.\n");
+			return ret;
+		}
+		if (offset && is_return) {
+			pr_info("Return probe must be used without offset.\n");
+			return -EINVAL;
+		}
+	}
+	argc -= 2; argv += 2;
+
+	/* setup a probe */
+	if (!group)
+		group = KPROBE_EVENT_SYSTEM;
+	if (!event) {
+		/* Make a new event name */
+		if (symbol)
+			snprintf(buf, MAX_EVENT_NAME_LEN, "%c@%s%+ld",
+				 is_return ? 'r' : 'p', symbol, offset);
+		else
+			snprintf(buf, MAX_EVENT_NAME_LEN, "%c@0x%p",
+				 is_return ? 'r' : 'p', addr);
+		event = buf;
+	}
+	tp = alloc_trace_probe(group, event, addr, symbol, offset, argc,
+			       is_return);
+	if (IS_ERR(tp)) {
+		pr_info("Failed to allocate trace_probe.(%d)\n",
+			(int)PTR_ERR(tp));
+		return PTR_ERR(tp);
+	}
+
+	/* parse arguments */
+	ret = 0;
+	for (i = 0; i < argc && i < MAX_TRACE_ARGS; i++) {
+		/* Parse argument name */
+		arg = strchr(argv[i], '=');
+		if (arg)
+			*arg++ = '\0';
+		else
+			arg = argv[i];
+
+		if (conflict_field_name(argv[i], tp->args, i)) {
+			pr_info("Argument%d name '%s' conflicts with "
+				"another field.\n", i, argv[i]);
+			ret = -EINVAL;
+			goto error;
+		}
+
+		tp->args[i].name = kstrdup(argv[i], GFP_KERNEL);
+		if (!tp->args[i].name) {
+			pr_info("Failed to allocate argument%d name '%s'.\n",
+				i, argv[i]);
+			ret = -ENOMEM;
+			goto error;
+		}
+
+		/* Parse fetch argument */
+		ret = parse_probe_arg(arg, &tp->args[i].fetch, is_return);
+		if (ret) {
+			pr_info("Parse error at argument%d. (%d)\n", i, ret);
+			kfree(tp->args[i].name);
+			goto error;
+		}
+
+		tp->nr_args++;
+	}
+
+	ret = register_trace_probe(tp);
+	if (ret)
+		goto error;
+	return 0;
+
+error:
+	free_trace_probe(tp);
+	return ret;
+}
+
+static void cleanup_all_probes(void)
+{
+	struct trace_probe *tp;
+
+	mutex_lock(&probe_lock);
+	/* TODO: Use batch unregistration */
+	while (!list_empty(&probe_list)) {
+		tp = list_entry(probe_list.next, struct trace_probe, list);
+		unregister_trace_probe(tp);
+		free_trace_probe(tp);
+	}
+	mutex_unlock(&probe_lock);
+}
+
+
+/* Probes listing interfaces */
+static void *probes_seq_start(struct seq_file *m, loff_t *pos)
+{
+	mutex_lock(&probe_lock);
+	return seq_list_start(&probe_list, *pos);
+}
+
+static void *probes_seq_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	return seq_list_next(v, &probe_list, pos);
+}
+
+static void probes_seq_stop(struct seq_file *m, void *v)
+{
+	mutex_unlock(&probe_lock);
+}
+
+static int probes_seq_show(struct seq_file *m, void *v)
+{
+	struct trace_probe *tp = v;
+	int i, ret;
+	char buf[MAX_ARGSTR_LEN + 1];
+
+	seq_printf(m, "%c", probe_is_return(tp) ? 'r' : 'p');
+	seq_printf(m, ":%s/%s", tp->call.system, tp->call.name);
+
+	if (!tp->symbol)
+		seq_printf(m, " 0x%p", tp->rp.kp.addr);
+	else if (tp->rp.kp.offset)
+		seq_printf(m, " %s+%u", probe_symbol(tp), tp->rp.kp.offset);
+	else
+		seq_printf(m, " %s", probe_symbol(tp));
+
+	for (i = 0; i < tp->nr_args; i++) {
+		ret = probe_arg_string(buf, MAX_ARGSTR_LEN, &tp->args[i].fetch);
+		if (ret < 0) {
+			pr_warning("Argument%d decoding error(%d).\n", i, ret);
+			return ret;
+		}
+		seq_printf(m, " %s=%s", tp->args[i].name, buf);
+	}
+	seq_printf(m, "\n");
+	return 0;
+}
+
+static const struct seq_operations probes_seq_op = {
+	.start  = probes_seq_start,
+	.next   = probes_seq_next,
+	.stop   = probes_seq_stop,
+	.show   = probes_seq_show
+};
+
+static int probes_open(struct inode *inode, struct file *file)
+{
+	if ((file->f_mode & FMODE_WRITE) &&
+	    (file->f_flags & O_TRUNC))
+		cleanup_all_probes();
+
+	return seq_open(file, &probes_seq_op);
+}
+
+static int command_trace_probe(const char *buf)
+{
+	char **argv;
+	int argc = 0, ret = 0;
+
+	argv = argv_split(GFP_KERNEL, buf, &argc);
+	if (!argv)
+		return -ENOMEM;
+
+	if (argc)
+		ret = create_trace_probe(argc, argv);
+
+	argv_free(argv);
+	return ret;
+}
+
+#define WRITE_BUFSIZE 128
+
+static ssize_t probes_write(struct file *file, const char __user *buffer,
+			    size_t count, loff_t *ppos)
+{
+	char *kbuf, *tmp;
+	int ret;
+	size_t done;
+	size_t size;
+
+	kbuf = kmalloc(WRITE_BUFSIZE, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	ret = done = 0;
+	while (done < count) {
+		size = count - done;
+		if (size >= WRITE_BUFSIZE)
+			size = WRITE_BUFSIZE - 1;
+		if (copy_from_user(kbuf, buffer + done, size)) {
+			ret = -EFAULT;
+			goto out;
+		}
+		kbuf[size] = '\0';
+		tmp = strchr(kbuf, '\n');
+		if (tmp) {
+			*tmp = '\0';
+			size = tmp - kbuf + 1;
+		} else if (done + size < count) {
+			pr_warning("Line length is too long: "
+				   "Should be less than %d.", WRITE_BUFSIZE);
+			ret = -EINVAL;
+			goto out;
+		}
+		done += size;
+		/* Remove comments */
+		tmp = strchr(kbuf, '#');
+		if (tmp)
+			*tmp = '\0';
+
+		ret = command_trace_probe(kbuf);
+		if (ret)
+			goto out;
+	}
+	ret = done;
+out:
+	kfree(kbuf);
+	return ret;
+}
+
+static const struct file_operations kprobe_events_ops = {
+	.owner          = THIS_MODULE,
+	.open           = probes_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = seq_release,
+	.write		= probes_write,
+};
+
+/* Probes profiling interfaces */
+static int probes_profile_seq_show(struct seq_file *m, void *v)
+{
+	struct trace_probe *tp = v;
+
+	seq_printf(m, "  %-44s %15lu %15lu\n", tp->call.name, tp->nhit,
+		   tp->rp.kp.nmissed);
+
+	return 0;
+}
+
+static const struct seq_operations profile_seq_op = {
+	.start  = probes_seq_start,
+	.next   = probes_seq_next,
+	.stop   = probes_seq_stop,
+	.show   = probes_profile_seq_show
+};
+
+static int profile_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &profile_seq_op);
+}
+
+static const struct file_operations kprobe_profile_ops = {
+	.owner          = THIS_MODULE,
+	.open           = profile_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = seq_release,
+};
+
+/* Kprobe handler */
+static __kprobes int kprobe_trace_func(struct kprobe *kp, struct pt_regs *regs)
+{
+	struct trace_probe *tp = container_of(kp, struct trace_probe, rp.kp);
+	struct kprobe_trace_entry *entry;
+	struct ring_buffer_event *event;
+	struct ring_buffer *buffer;
+	int size, i, pc;
+	unsigned long irq_flags;
+	struct ftrace_event_call *call = &tp->call;
+
+	tp->nhit++;
+
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
+	size = SIZEOF_KPROBE_TRACE_ENTRY(tp->nr_args);
+
+	event = trace_current_buffer_lock_reserve(&buffer, call->id, size,
+						  irq_flags, pc);
+	if (!event)
+		return 0;
+
+	entry = ring_buffer_event_data(event);
+	entry->nargs = tp->nr_args;
+	entry->ip = (unsigned long)kp->addr;
+	for (i = 0; i < tp->nr_args; i++)
+		entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
+
+	if (!filter_current_check_discard(buffer, call, entry, event))
+		trace_nowake_buffer_unlock_commit(buffer, event, irq_flags, pc);
+	return 0;
+}
+
+/* Kretprobe handler */
+static __kprobes int kretprobe_trace_func(struct kretprobe_instance *ri,
+					  struct pt_regs *regs)
+{
+	struct trace_probe *tp = container_of(ri->rp, struct trace_probe, rp);
+	struct kretprobe_trace_entry *entry;
+	struct ring_buffer_event *event;
+	struct ring_buffer *buffer;
+	int size, i, pc;
+	unsigned long irq_flags;
+	struct ftrace_event_call *call = &tp->call;
+
+	local_save_flags(irq_flags);
+	pc = preempt_count();
+
+	size = SIZEOF_KRETPROBE_TRACE_ENTRY(tp->nr_args);
+
+	event = trace_current_buffer_lock_reserve(&buffer, call->id, size,
+						  irq_flags, pc);
+	if (!event)
+		return 0;
+
+	entry = ring_buffer_event_data(event);
+	entry->nargs = tp->nr_args;
+	entry->func = (unsigned long)tp->rp.kp.addr;
+	entry->ret_ip = (unsigned long)ri->ret_addr;
+	for (i = 0; i < tp->nr_args; i++)
+		entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
+
+	if (!filter_current_check_discard(buffer, call, entry, event))
+		trace_nowake_buffer_unlock_commit(buffer, event, irq_flags, pc);
+
+	return 0;
+}
+
+/* Event entry printers */
+enum print_line_t
+print_kprobe_event(struct trace_iterator *iter, int flags)
+{
+	struct kprobe_trace_entry *field;
+	struct trace_seq *s = &iter->seq;
+	struct trace_event *event;
+	struct trace_probe *tp;
+	int i;
+
+	field = (struct kprobe_trace_entry *)iter->ent;
+	event = ftrace_find_event(field->ent.type);
+	tp = container_of(event, struct trace_probe, event);
+
+	if (!trace_seq_printf(s, "%s: (", tp->call.name))
+		goto partial;
+
+	if (!seq_print_ip_sym(s, field->ip, flags | TRACE_ITER_SYM_OFFSET))
+		goto partial;
+
+	if (!trace_seq_puts(s, ")"))
+		goto partial;
+
+	for (i = 0; i < field->nargs; i++)
+		if (!trace_seq_printf(s, " %s=%lx",
+				      tp->args[i].name, field->args[i]))
+			goto partial;
+
+	if (!trace_seq_puts(s, "\n"))
+		goto partial;
+
+	return TRACE_TYPE_HANDLED;
+partial:
+	return TRACE_TYPE_PARTIAL_LINE;
+}
+
+enum print_line_t
+print_kretprobe_event(struct trace_iterator *iter, int flags)
+{
+	struct kretprobe_trace_entry *field;
+	struct trace_seq *s = &iter->seq;
+	struct trace_event *event;
+	struct trace_probe *tp;
+	int i;
+
+	field = (struct kretprobe_trace_entry *)iter->ent;
+	event = ftrace_find_event(field->ent.type);
+	tp = container_of(event, struct trace_probe, event);
+
+	if (!trace_seq_printf(s, "%s: (", tp->call.name))
+		goto partial;
+
+	if (!seq_print_ip_sym(s, field->ret_ip, flags | TRACE_ITER_SYM_OFFSET))
+		goto partial;
+
+	if (!trace_seq_puts(s, " <- "))
+		goto partial;
+
+	if (!seq_print_ip_sym(s, field->func, flags & ~TRACE_ITER_SYM_OFFSET))
+		goto partial;
+
+	if (!trace_seq_puts(s, ")"))
+		goto partial;
+
+	for (i = 0; i < field->nargs; i++)
+		if (!trace_seq_printf(s, " %s=%lx",
+				      tp->args[i].name, field->args[i]))
+			goto partial;
+
+	if (!trace_seq_puts(s, "\n"))
+		goto partial;
+
+	return TRACE_TYPE_HANDLED;
+partial:
+	return TRACE_TYPE_PARTIAL_LINE;
+}
+
+static int probe_event_enable(struct ftrace_event_call *call)
+{
+	struct trace_probe *tp = (struct trace_probe *)call->data;
+
+	tp->flags |= TP_FLAG_TRACE;
+	if (probe_is_return(tp))
+		return enable_kretprobe(&tp->rp);
+	else
+		return enable_kprobe(&tp->rp.kp);
+}
+
+static void probe_event_disable(struct ftrace_event_call *call)
+{
+	struct trace_probe *tp = (struct trace_probe *)call->data;
+
+	tp->flags &= ~TP_FLAG_TRACE;
+	if (!(tp->flags & (TP_FLAG_TRACE | TP_FLAG_PROFILE))) {
+		if (probe_is_return(tp))
+			disable_kretprobe(&tp->rp);
+		else
+			disable_kprobe(&tp->rp.kp);
+	}
+}
+
+static int probe_event_raw_init(struct ftrace_event_call *event_call)
+{
+	INIT_LIST_HEAD(&event_call->fields);
+
+	return 0;
+}
+
+#undef DEFINE_FIELD
+#define DEFINE_FIELD(type, item, name, is_signed)			\
+	do {								\
+		ret = trace_define_field(event_call, #type, name,	\
+					 offsetof(typeof(field), item),	\
+					 sizeof(field.item), is_signed, \
+					 FILTER_OTHER);			\
+		if (ret)						\
+			return ret;					\
+	} while (0)
+
+static int kprobe_event_define_fields(struct ftrace_event_call *event_call)
+{
+	int ret, i;
+	struct kprobe_trace_entry field;
+	struct trace_probe *tp = (struct trace_probe *)event_call->data;
+
+	ret = trace_define_common_fields(event_call);
+	if (!ret)
+		return ret;
+
+	DEFINE_FIELD(unsigned long, ip, FIELD_STRING_IP, 0);
+	DEFINE_FIELD(int, nargs, FIELD_STRING_NARGS, 1);
+	/* Set argument names as fields */
+	for (i = 0; i < tp->nr_args; i++)
+		DEFINE_FIELD(unsigned long, args[i], tp->args[i].name, 0);
+	return 0;
+}
+
+static int kretprobe_event_define_fields(struct ftrace_event_call *event_call)
+{
+	int ret, i;
+	struct kretprobe_trace_entry field;
+	struct trace_probe *tp = (struct trace_probe *)event_call->data;
+
+	ret = trace_define_common_fields(event_call);
+	if (!ret)
+		return ret;
+
+	DEFINE_FIELD(unsigned long, func, FIELD_STRING_FUNC, 0);
+	DEFINE_FIELD(unsigned long, ret_ip, FIELD_STRING_RETIP, 0);
+	DEFINE_FIELD(int, nargs, FIELD_STRING_NARGS, 1);
+	/* Set argument names as fields */
+	for (i = 0; i < tp->nr_args; i++)
+		DEFINE_FIELD(unsigned long, args[i], tp->args[i].name, 0);
+	return 0;
+}
+
+static int __probe_event_show_format(struct trace_seq *s,
+				     struct trace_probe *tp, const char *fmt,
+				     const char *arg)
+{
+	int i;
+
+	/* Show format */
+	if (!trace_seq_printf(s, "\nprint fmt: \"%s", fmt))
+		return 0;
+
+	for (i = 0; i < tp->nr_args; i++)
+		if (!trace_seq_printf(s, " %s=%%lx", tp->args[i].name))
+			return 0;
+
+	if (!trace_seq_printf(s, "\", %s", arg))
+		return 0;
+
+	for (i = 0; i < tp->nr_args; i++)
+		if (!trace_seq_printf(s, ", REC->%s", tp->args[i].name))
+			return 0;
+
+	return trace_seq_puts(s, "\n");
+}
+
+#undef SHOW_FIELD
+#define SHOW_FIELD(type, item, name)					\
+	do {								\
+		ret = trace_seq_printf(s, "\tfield: " #type " %s;\t"	\
+				"offset:%u;\tsize:%u;\n", name,		\
+				(unsigned int)offsetof(typeof(field), item),\
+				(unsigned int)sizeof(type));		\
+		if (!ret)						\
+			return 0;					\
+	} while (0)
+
+static int kprobe_event_show_format(struct ftrace_event_call *call,
+				    struct trace_seq *s)
+{
+	struct kprobe_trace_entry field __attribute__((unused));
+	int ret, i;
+	struct trace_probe *tp = (struct trace_probe *)call->data;
+
+	SHOW_FIELD(unsigned long, ip, FIELD_STRING_IP);
+	SHOW_FIELD(int, nargs, FIELD_STRING_NARGS);
+
+	/* Show fields */
+	for (i = 0; i < tp->nr_args; i++)
+		SHOW_FIELD(unsigned long, args[i], tp->args[i].name);
+	trace_seq_puts(s, "\n");
+
+	return __probe_event_show_format(s, tp, "(%lx)",
+					 "REC->" FIELD_STRING_IP);
+}
+
+static int kretprobe_event_show_format(struct ftrace_event_call *call,
+				       struct trace_seq *s)
+{
+	struct kretprobe_trace_entry field __attribute__((unused));
+	int ret, i;
+	struct trace_probe *tp = (struct trace_probe *)call->data;
+
+	SHOW_FIELD(unsigned long, func, FIELD_STRING_FUNC);
+	SHOW_FIELD(unsigned long, ret_ip, FIELD_STRING_RETIP);
+	SHOW_FIELD(int, nargs, FIELD_STRING_NARGS);
+
+	/* Show fields */
+	for (i = 0; i < tp->nr_args; i++)
+		SHOW_FIELD(unsigned long, args[i], tp->args[i].name);
+	trace_seq_puts(s, "\n");
+
+	return __probe_event_show_format(s, tp, "(%lx <- %lx)",
+					 "REC->" FIELD_STRING_FUNC
+					 ", REC->" FIELD_STRING_RETIP);
+}
+
+#ifdef CONFIG_EVENT_PROFILE
+
+/* Kprobe profile handler */
+static __kprobes int kprobe_profile_func(struct kprobe *kp,
+					 struct pt_regs *regs)
+{
+	struct trace_probe *tp = container_of(kp, struct trace_probe, rp.kp);
+	struct ftrace_event_call *call = &tp->call;
+	struct kprobe_trace_entry *entry;
+	struct trace_entry *ent;
+	int size, __size, i, pc, __cpu;
+	unsigned long irq_flags;
+	char *trace_buf;
+	char *raw_data;
+	int rctx;
+
+	pc = preempt_count();
+	__size = SIZEOF_KPROBE_TRACE_ENTRY(tp->nr_args);
+	size = ALIGN(__size + sizeof(u32), sizeof(u64));
+	size -= sizeof(u32);
+	if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
+		     "profile buffer not large enough"))
+		return 0;
+
+	/*
+	 * Protect the non nmi buffer
+	 * This also protects the rcu read side
+	 */
+	local_irq_save(irq_flags);
+
+	rctx = perf_swevent_get_recursion_context();
+	if (rctx < 0)
+		goto end_recursion;
+
+	__cpu = smp_processor_id();
+
+	if (in_nmi())
+		trace_buf = rcu_dereference(perf_trace_buf_nmi);
+	else
+		trace_buf = rcu_dereference(perf_trace_buf);
+
+	if (!trace_buf)
+		goto end;
+
+	raw_data = per_cpu_ptr(trace_buf, __cpu);
+
+	/* Zero dead bytes from alignment to avoid buffer leak to userspace */
+	*(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
+	entry = (struct kprobe_trace_entry *)raw_data;
+	ent = &entry->ent;
+
+	tracing_generic_entry_update(ent, irq_flags, pc);
+	ent->type = call->id;
+	entry->nargs = tp->nr_args;
+	entry->ip = (unsigned long)kp->addr;
+	for (i = 0; i < tp->nr_args; i++)
+		entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
+	perf_tp_event(call->id, entry->ip, 1, entry, size);
+
+end:
+	perf_swevent_put_recursion_context(rctx);
+end_recursion:
+	local_irq_restore(irq_flags);
+
+	return 0;
+}
+
+/* Kretprobe profile handler */
+static __kprobes int kretprobe_profile_func(struct kretprobe_instance *ri,
+					    struct pt_regs *regs)
+{
+	struct trace_probe *tp = container_of(ri->rp, struct trace_probe, rp);
+	struct ftrace_event_call *call = &tp->call;
+	struct kretprobe_trace_entry *entry;
+	struct trace_entry *ent;
+	int size, __size, i, pc, __cpu;
+	unsigned long irq_flags;
+	char *trace_buf;
+	char *raw_data;
+	int rctx;
+
+	pc = preempt_count();
+	__size = SIZEOF_KRETPROBE_TRACE_ENTRY(tp->nr_args);
+	size = ALIGN(__size + sizeof(u32), sizeof(u64));
+	size -= sizeof(u32);
+	if (WARN_ONCE(size > FTRACE_MAX_PROFILE_SIZE,
+		     "profile buffer not large enough"))
+		return 0;
+
+	/*
+	 * Protect the non nmi buffer
+	 * This also protects the rcu read side
+	 */
+	local_irq_save(irq_flags);
+
+	rctx = perf_swevent_get_recursion_context();
+	if (rctx < 0)
+		goto end_recursion;
+
+	__cpu = smp_processor_id();
+
+	if (in_nmi())
+		trace_buf = rcu_dereference(perf_trace_buf_nmi);
+	else
+		trace_buf = rcu_dereference(perf_trace_buf);
+
+	if (!trace_buf)
+		goto end;
+
+	raw_data = per_cpu_ptr(trace_buf, __cpu);
+
+	/* Zero dead bytes from alignment to avoid buffer leak to userspace */
+	*(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
+	entry = (struct kretprobe_trace_entry *)raw_data;
+	ent = &entry->ent;
+
+	tracing_generic_entry_update(ent, irq_flags, pc);
+	ent->type = call->id;
+	entry->nargs = tp->nr_args;
+	entry->func = (unsigned long)tp->rp.kp.addr;
+	entry->ret_ip = (unsigned long)ri->ret_addr;
+	for (i = 0; i < tp->nr_args; i++)
+		entry->args[i] = call_fetch(&tp->args[i].fetch, regs);
+	perf_tp_event(call->id, entry->ret_ip, 1, entry, size);
+
+end:
+	perf_swevent_put_recursion_context(rctx);
+end_recursion:
+	local_irq_restore(irq_flags);
+
+	return 0;
+}
+
+static int probe_profile_enable(struct ftrace_event_call *call)
+{
+	struct trace_probe *tp = (struct trace_probe *)call->data;
+
+	tp->flags |= TP_FLAG_PROFILE;
+
+	if (probe_is_return(tp))
+		return enable_kretprobe(&tp->rp);
+	else
+		return enable_kprobe(&tp->rp.kp);
+}
+
+static void probe_profile_disable(struct ftrace_event_call *call)
+{
+	struct trace_probe *tp = (struct trace_probe *)call->data;
+
+	tp->flags &= ~TP_FLAG_PROFILE;
+
+	if (!(tp->flags & TP_FLAG_TRACE)) {
+		if (probe_is_return(tp))
+			disable_kretprobe(&tp->rp);
+		else
+			disable_kprobe(&tp->rp.kp);
+	}
+}
+#endif	/* CONFIG_EVENT_PROFILE */
+
+
+static __kprobes
+int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs)
+{
+	struct trace_probe *tp = container_of(kp, struct trace_probe, rp.kp);
+
+	if (tp->flags & TP_FLAG_TRACE)
+		kprobe_trace_func(kp, regs);
+#ifdef CONFIG_EVENT_PROFILE
+	if (tp->flags & TP_FLAG_PROFILE)
+		kprobe_profile_func(kp, regs);
+#endif	/* CONFIG_EVENT_PROFILE */
+	return 0;	/* We don't tweek kernel, so just return 0 */
+}
+
+static __kprobes
+int kretprobe_dispatcher(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+	struct trace_probe *tp = container_of(ri->rp, struct trace_probe, rp);
+
+	if (tp->flags & TP_FLAG_TRACE)
+		kretprobe_trace_func(ri, regs);
+#ifdef CONFIG_EVENT_PROFILE
+	if (tp->flags & TP_FLAG_PROFILE)
+		kretprobe_profile_func(ri, regs);
+#endif	/* CONFIG_EVENT_PROFILE */
+	return 0;	/* We don't tweek kernel, so just return 0 */
+}
+
+static int register_probe_event(struct trace_probe *tp)
+{
+	struct ftrace_event_call *call = &tp->call;
+	int ret;
+
+	/* Initialize ftrace_event_call */
+	if (probe_is_return(tp)) {
+		tp->event.trace = print_kretprobe_event;
+		call->raw_init = probe_event_raw_init;
+		call->show_format = kretprobe_event_show_format;
+		call->define_fields = kretprobe_event_define_fields;
+	} else {
+		tp->event.trace = print_kprobe_event;
+		call->raw_init = probe_event_raw_init;
+		call->show_format = kprobe_event_show_format;
+		call->define_fields = kprobe_event_define_fields;
+	}
+	call->event = &tp->event;
+	call->id = register_ftrace_event(&tp->event);
+	if (!call->id)
+		return -ENODEV;
+	call->enabled = 0;
+	call->regfunc = probe_event_enable;
+	call->unregfunc = probe_event_disable;
+
+#ifdef CONFIG_EVENT_PROFILE
+	atomic_set(&call->profile_count, -1);
+	call->profile_enable = probe_profile_enable;
+	call->profile_disable = probe_profile_disable;
+#endif
+	call->data = tp;
+	ret = trace_add_event_call(call);
+	if (ret) {
+		pr_info("Failed to register kprobe event: %s\n", call->name);
+		unregister_ftrace_event(&tp->event);
+	}
+	return ret;
+}
+
+static void unregister_probe_event(struct trace_probe *tp)
+{
+	/* tp->event is unregistered in trace_remove_event_call() */
+	trace_remove_event_call(&tp->call);
+}
+
+/* Make a debugfs interface for controling probe points */
+static __init int init_kprobe_trace(void)
+{
+	struct dentry *d_tracer;
+	struct dentry *entry;
+
+	d_tracer = tracing_init_dentry();
+	if (!d_tracer)
+		return 0;
+
+	entry = debugfs_create_file("kprobe_events", 0644, d_tracer,
+				    NULL, &kprobe_events_ops);
+
+	/* Event list interface */
+	if (!entry)
+		pr_warning("Could not create debugfs "
+			   "'kprobe_events' entry\n");
+
+	/* Profile interface */
+	entry = debugfs_create_file("kprobe_profile", 0444, d_tracer,
+				    NULL, &kprobe_profile_ops);
+
+	if (!entry)
+		pr_warning("Could not create debugfs "
+			   "'kprobe_profile' entry\n");
+	return 0;
+}
+fs_initcall(init_kprobe_trace);
+
+
+#ifdef CONFIG_FTRACE_STARTUP_TEST
+
+static int kprobe_trace_selftest_target(int a1, int a2, int a3,
+					int a4, int a5, int a6)
+{
+	return a1 + a2 + a3 + a4 + a5 + a6;
+}
+
+static __init int kprobe_trace_self_tests_init(void)
+{
+	int ret;
+	int (*target)(int, int, int, int, int, int);
+
+	target = kprobe_trace_selftest_target;
+
+	pr_info("Testing kprobe tracing: ");
+
+	ret = command_trace_probe("p:testprobe kprobe_trace_selftest_target "
+				  "$arg1 $arg2 $arg3 $arg4 $stack $stack0");
+	if (WARN_ON_ONCE(ret))
+		pr_warning("error enabling function entry\n");
+
+	ret = command_trace_probe("r:testprobe2 kprobe_trace_selftest_target "
+				  "$retval");
+	if (WARN_ON_ONCE(ret))
+		pr_warning("error enabling function return\n");
+
+	ret = target(1, 2, 3, 4, 5, 6);
+
+	cleanup_all_probes();
+
+	pr_cont("OK\n");
+	return 0;
+}
+
+late_initcall(kprobe_trace_self_tests_init);
+
+#endif
diff --git a/kernel/trace/trace_ksym.c b/kernel/trace/trace_ksym.c
new file mode 100644
index 0000000..ddfa0fd
--- /dev/null
+++ b/kernel/trace/trace_ksym.c
@@ -0,0 +1,550 @@
+/*
+ * trace_ksym.c - Kernel Symbol Tracer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ */
+
+#include <linux/kallsyms.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/ftrace.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+
+#include "trace_output.h"
+#include "trace_stat.h"
+#include "trace.h"
+
+#include <linux/hw_breakpoint.h>
+#include <asm/hw_breakpoint.h>
+
+/*
+ * For now, let us restrict the no. of symbols traced simultaneously to number
+ * of available hardware breakpoint registers.
+ */
+#define KSYM_TRACER_MAX HBP_NUM
+
+#define KSYM_TRACER_OP_LEN 3 /* rw- */
+
+struct trace_ksym {
+	struct perf_event	**ksym_hbp;
+	struct perf_event_attr	attr;
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+	unsigned long		counter;
+#endif
+	struct hlist_node	ksym_hlist;
+};
+
+static struct trace_array *ksym_trace_array;
+
+static unsigned int ksym_filter_entry_count;
+static unsigned int ksym_tracing_enabled;
+
+static HLIST_HEAD(ksym_filter_head);
+
+static DEFINE_MUTEX(ksym_tracer_mutex);
+
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+
+#define MAX_UL_INT 0xffffffff
+
+void ksym_collect_stats(unsigned long hbp_hit_addr)
+{
+	struct hlist_node *node;
+	struct trace_ksym *entry;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(entry, node, &ksym_filter_head, ksym_hlist) {
+		if ((entry->attr.bp_addr == hbp_hit_addr) &&
+		    (entry->counter <= MAX_UL_INT)) {
+			entry->counter++;
+			break;
+		}
+	}
+	rcu_read_unlock();
+}
+#endif /* CONFIG_PROFILE_KSYM_TRACER */
+
+void ksym_hbp_handler(struct perf_event *hbp, void *data)
+{
+	struct ring_buffer_event *event;
+	struct ksym_trace_entry *entry;
+	struct pt_regs *regs = data;
+	struct ring_buffer *buffer;
+	int pc;
+
+	if (!ksym_tracing_enabled)
+		return;
+
+	buffer = ksym_trace_array->buffer;
+
+	pc = preempt_count();
+
+	event = trace_buffer_lock_reserve(buffer, TRACE_KSYM,
+							sizeof(*entry), 0, pc);
+	if (!event)
+		return;
+
+	entry		= ring_buffer_event_data(event);
+	entry->ip	= instruction_pointer(regs);
+	entry->type	= hw_breakpoint_type(hbp);
+	entry->addr	= hw_breakpoint_addr(hbp);
+	strlcpy(entry->cmd, current->comm, TASK_COMM_LEN);
+
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+	ksym_collect_stats(hw_breakpoint_addr(hbp));
+#endif /* CONFIG_PROFILE_KSYM_TRACER */
+
+	trace_buffer_unlock_commit(buffer, event, 0, pc);
+}
+
+/* Valid access types are represented as
+ *
+ * rw- : Set Read/Write Access Breakpoint
+ * -w- : Set Write Access Breakpoint
+ * --- : Clear Breakpoints
+ * --x : Set Execution Break points (Not available yet)
+ *
+ */
+static int ksym_trace_get_access_type(char *str)
+{
+	int access = 0;
+
+	if (str[0] == 'r')
+		access |= HW_BREAKPOINT_R;
+
+	if (str[1] == 'w')
+		access |= HW_BREAKPOINT_W;
+
+	if (str[2] == 'x')
+		access |= HW_BREAKPOINT_X;
+
+	switch (access) {
+	case HW_BREAKPOINT_R:
+	case HW_BREAKPOINT_W:
+	case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
+		return access;
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * There can be several possible malformed requests and we attempt to capture
+ * all of them. We enumerate some of the rules
+ * 1. We will not allow kernel symbols with ':' since it is used as a delimiter.
+ *    i.e. multiple ':' symbols disallowed. Possible uses are of the form
+ *    <module>:<ksym_name>:<op>.
+ * 2. No delimiter symbol ':' in the input string
+ * 3. Spurious operator symbols or symbols not in their respective positions
+ * 4. <ksym_name>:--- i.e. clear breakpoint request when ksym_name not in file
+ * 5. Kernel symbol not a part of /proc/kallsyms
+ * 6. Duplicate requests
+ */
+static int parse_ksym_trace_str(char *input_string, char **ksymname,
+							unsigned long *addr)
+{
+	int ret;
+
+	*ksymname = strsep(&input_string, ":");
+	*addr = kallsyms_lookup_name(*ksymname);
+
+	/* Check for malformed request: (2), (1) and (5) */
+	if ((!input_string) ||
+	    (strlen(input_string) != KSYM_TRACER_OP_LEN) ||
+	    (*addr == 0))
+		return -EINVAL;;
+
+	ret = ksym_trace_get_access_type(input_string);
+
+	return ret;
+}
+
+int process_new_ksym_entry(char *ksymname, int op, unsigned long addr)
+{
+	struct trace_ksym *entry;
+	int ret = -ENOMEM;
+
+	if (ksym_filter_entry_count >= KSYM_TRACER_MAX) {
+		printk(KERN_ERR "ksym_tracer: Maximum limit:(%d) reached. No"
+		" new requests for tracing can be accepted now.\n",
+			KSYM_TRACER_MAX);
+		return -ENOSPC;
+	}
+
+	entry = kzalloc(sizeof(struct trace_ksym), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+
+	hw_breakpoint_init(&entry->attr);
+
+	entry->attr.bp_type = op;
+	entry->attr.bp_addr = addr;
+	entry->attr.bp_len = HW_BREAKPOINT_LEN_4;
+
+	ret = -EAGAIN;
+	entry->ksym_hbp = register_wide_hw_breakpoint(&entry->attr,
+					ksym_hbp_handler);
+
+	if (IS_ERR(entry->ksym_hbp)) {
+		ret = PTR_ERR(entry->ksym_hbp);
+		printk(KERN_INFO "ksym_tracer request failed. Try again"
+					" later!!\n");
+		goto err;
+	}
+
+	hlist_add_head_rcu(&(entry->ksym_hlist), &ksym_filter_head);
+	ksym_filter_entry_count++;
+
+	return 0;
+
+err:
+	kfree(entry);
+
+	return ret;
+}
+
+static ssize_t ksym_trace_filter_read(struct file *filp, char __user *ubuf,
+						size_t count, loff_t *ppos)
+{
+	struct trace_ksym *entry;
+	struct hlist_node *node;
+	struct trace_seq *s;
+	ssize_t cnt = 0;
+	int ret;
+
+	s = kmalloc(sizeof(*s), GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	trace_seq_init(s);
+
+	mutex_lock(&ksym_tracer_mutex);
+
+	hlist_for_each_entry(entry, node, &ksym_filter_head, ksym_hlist) {
+		ret = trace_seq_printf(s, "%pS:", (void *)entry->attr.bp_addr);
+		if (entry->attr.bp_type == HW_BREAKPOINT_R)
+			ret = trace_seq_puts(s, "r--\n");
+		else if (entry->attr.bp_type == HW_BREAKPOINT_W)
+			ret = trace_seq_puts(s, "-w-\n");
+		else if (entry->attr.bp_type == (HW_BREAKPOINT_W | HW_BREAKPOINT_R))
+			ret = trace_seq_puts(s, "rw-\n");
+		WARN_ON_ONCE(!ret);
+	}
+
+	cnt = simple_read_from_buffer(ubuf, count, ppos, s->buffer, s->len);
+
+	mutex_unlock(&ksym_tracer_mutex);
+
+	kfree(s);
+
+	return cnt;
+}
+
+static void __ksym_trace_reset(void)
+{
+	struct trace_ksym *entry;
+	struct hlist_node *node, *node1;
+
+	mutex_lock(&ksym_tracer_mutex);
+	hlist_for_each_entry_safe(entry, node, node1, &ksym_filter_head,
+								ksym_hlist) {
+		unregister_wide_hw_breakpoint(entry->ksym_hbp);
+		ksym_filter_entry_count--;
+		hlist_del_rcu(&(entry->ksym_hlist));
+		synchronize_rcu();
+		kfree(entry);
+	}
+	mutex_unlock(&ksym_tracer_mutex);
+}
+
+static ssize_t ksym_trace_filter_write(struct file *file,
+					const char __user *buffer,
+						size_t count, loff_t *ppos)
+{
+	struct trace_ksym *entry;
+	struct hlist_node *node;
+	char *input_string, *ksymname = NULL;
+	unsigned long ksym_addr = 0;
+	int ret, op, changed = 0;
+
+	input_string = kzalloc(count + 1, GFP_KERNEL);
+	if (!input_string)
+		return -ENOMEM;
+
+	if (copy_from_user(input_string, buffer, count)) {
+		kfree(input_string);
+		return -EFAULT;
+	}
+	input_string[count] = '\0';
+
+	strstrip(input_string);
+
+	/*
+	 * Clear all breakpoints if:
+	 * 1: echo > ksym_trace_filter
+	 * 2: echo 0 > ksym_trace_filter
+	 * 3: echo "*:---" > ksym_trace_filter
+	 */
+	if (!input_string[0] || !strcmp(input_string, "0") ||
+	    !strcmp(input_string, "*:---")) {
+		__ksym_trace_reset();
+		kfree(input_string);
+		return count;
+	}
+
+	ret = op = parse_ksym_trace_str(input_string, &ksymname, &ksym_addr);
+	if (ret < 0) {
+		kfree(input_string);
+		return ret;
+	}
+
+	mutex_lock(&ksym_tracer_mutex);
+
+	ret = -EINVAL;
+	hlist_for_each_entry(entry, node, &ksym_filter_head, ksym_hlist) {
+		if (entry->attr.bp_addr == ksym_addr) {
+			/* Check for malformed request: (6) */
+			if (entry->attr.bp_type != op)
+				changed = 1;
+			else
+				goto out;
+			break;
+		}
+	}
+	if (changed) {
+		unregister_wide_hw_breakpoint(entry->ksym_hbp);
+		entry->attr.bp_type = op;
+		ret = 0;
+		if (op > 0) {
+			entry->ksym_hbp =
+				register_wide_hw_breakpoint(&entry->attr,
+					ksym_hbp_handler);
+			if (IS_ERR(entry->ksym_hbp))
+				ret = PTR_ERR(entry->ksym_hbp);
+			else
+				goto out;
+		}
+		/* Error or "symbol:---" case: drop it */
+		ksym_filter_entry_count--;
+		hlist_del_rcu(&(entry->ksym_hlist));
+		synchronize_rcu();
+		kfree(entry);
+		goto out;
+	} else {
+		/* Check for malformed request: (4) */
+		if (op == 0)
+			goto out;
+		ret = process_new_ksym_entry(ksymname, op, ksym_addr);
+	}
+out:
+	mutex_unlock(&ksym_tracer_mutex);
+
+	kfree(input_string);
+
+	if (!ret)
+		ret = count;
+	return ret;
+}
+
+static const struct file_operations ksym_tracing_fops = {
+	.open		= tracing_open_generic,
+	.read		= ksym_trace_filter_read,
+	.write		= ksym_trace_filter_write,
+};
+
+static void ksym_trace_reset(struct trace_array *tr)
+{
+	ksym_tracing_enabled = 0;
+	__ksym_trace_reset();
+}
+
+static int ksym_trace_init(struct trace_array *tr)
+{
+	int cpu, ret = 0;
+
+	for_each_online_cpu(cpu)
+		tracing_reset(tr, cpu);
+	ksym_tracing_enabled = 1;
+	ksym_trace_array = tr;
+
+	return ret;
+}
+
+static void ksym_trace_print_header(struct seq_file *m)
+{
+	seq_puts(m,
+		 "#       TASK-PID   CPU#      Symbol                    "
+		 "Type    Function\n");
+	seq_puts(m,
+		 "#          |        |          |                       "
+		 " |         |\n");
+}
+
+static enum print_line_t ksym_trace_output(struct trace_iterator *iter)
+{
+	struct trace_entry *entry = iter->ent;
+	struct trace_seq *s = &iter->seq;
+	struct ksym_trace_entry *field;
+	char str[KSYM_SYMBOL_LEN];
+	int ret;
+
+	if (entry->type != TRACE_KSYM)
+		return TRACE_TYPE_UNHANDLED;
+
+	trace_assign_type(field, entry);
+
+	ret = trace_seq_printf(s, "%11s-%-5d [%03d] %pS", field->cmd,
+				entry->pid, iter->cpu, (char *)field->addr);
+	if (!ret)
+		return TRACE_TYPE_PARTIAL_LINE;
+
+	switch (field->type) {
+	case HW_BREAKPOINT_R:
+		ret = trace_seq_printf(s, " R  ");
+		break;
+	case HW_BREAKPOINT_W:
+		ret = trace_seq_printf(s, " W  ");
+		break;
+	case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
+		ret = trace_seq_printf(s, " RW ");
+		break;
+	default:
+		return TRACE_TYPE_PARTIAL_LINE;
+	}
+
+	if (!ret)
+		return TRACE_TYPE_PARTIAL_LINE;
+
+	sprint_symbol(str, field->ip);
+	ret = trace_seq_printf(s, "%s\n", str);
+	if (!ret)
+		return TRACE_TYPE_PARTIAL_LINE;
+
+	return TRACE_TYPE_HANDLED;
+}
+
+struct tracer ksym_tracer __read_mostly =
+{
+	.name		= "ksym_tracer",
+	.init		= ksym_trace_init,
+	.reset		= ksym_trace_reset,
+#ifdef CONFIG_FTRACE_SELFTEST
+	.selftest	= trace_selftest_startup_ksym,
+#endif
+	.print_header   = ksym_trace_print_header,
+	.print_line	= ksym_trace_output
+};
+
+__init static int init_ksym_trace(void)
+{
+	struct dentry *d_tracer;
+	struct dentry *entry;
+
+	d_tracer = tracing_init_dentry();
+	ksym_filter_entry_count = 0;
+
+	entry = debugfs_create_file("ksym_trace_filter", 0644, d_tracer,
+				    NULL, &ksym_tracing_fops);
+	if (!entry)
+		pr_warning("Could not create debugfs "
+			   "'ksym_trace_filter' file\n");
+
+	return register_tracer(&ksym_tracer);
+}
+device_initcall(init_ksym_trace);
+
+
+#ifdef CONFIG_PROFILE_KSYM_TRACER
+static int ksym_tracer_stat_headers(struct seq_file *m)
+{
+	seq_puts(m, "  Access Type ");
+	seq_puts(m, "  Symbol                                       Counter\n");
+	seq_puts(m, "  ----------- ");
+	seq_puts(m, "  ------                                       -------\n");
+	return 0;
+}
+
+static int ksym_tracer_stat_show(struct seq_file *m, void *v)
+{
+	struct hlist_node *stat = v;
+	struct trace_ksym *entry;
+	int access_type = 0;
+	char fn_name[KSYM_NAME_LEN];
+
+	entry = hlist_entry(stat, struct trace_ksym, ksym_hlist);
+
+	access_type = entry->attr.bp_type;
+
+	switch (access_type) {
+	case HW_BREAKPOINT_R:
+		seq_puts(m, "  R           ");
+		break;
+	case HW_BREAKPOINT_W:
+		seq_puts(m, "  W           ");
+		break;
+	case HW_BREAKPOINT_R | HW_BREAKPOINT_W:
+		seq_puts(m, "  RW          ");
+		break;
+	default:
+		seq_puts(m, "  NA          ");
+	}
+
+	if (lookup_symbol_name(entry->attr.bp_addr, fn_name) >= 0)
+		seq_printf(m, "  %-36s", fn_name);
+	else
+		seq_printf(m, "  %-36s", "<NA>");
+	seq_printf(m, " %15lu\n", entry->counter);
+
+	return 0;
+}
+
+static void *ksym_tracer_stat_start(struct tracer_stat *trace)
+{
+	return ksym_filter_head.first;
+}
+
+static void *
+ksym_tracer_stat_next(void *v, int idx)
+{
+	struct hlist_node *stat = v;
+
+	return stat->next;
+}
+
+static struct tracer_stat ksym_tracer_stats = {
+	.name = "ksym_tracer",
+	.stat_start = ksym_tracer_stat_start,
+	.stat_next = ksym_tracer_stat_next,
+	.stat_headers = ksym_tracer_stat_headers,
+	.stat_show = ksym_tracer_stat_show
+};
+
+__init static int ksym_tracer_stat_init(void)
+{
+	int ret;
+
+	ret = register_stat_tracer(&ksym_tracer_stats);
+	if (ret) {
+		printk(KERN_WARNING "Warning: could not register "
+				    "ksym tracer stats\n");
+		return 1;
+	}
+
+	return 0;
+}
+fs_initcall(ksym_tracer_stat_init);
+#endif /* CONFIG_PROFILE_KSYM_TRACER */
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index d2cdbab..dc98309 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -17,6 +17,7 @@
 	case TRACE_GRAPH_ENT:
 	case TRACE_GRAPH_RET:
 	case TRACE_HW_BRANCHES:
+	case TRACE_KSYM:
 		return 1;
 	}
 	return 0;
@@ -808,3 +809,57 @@
 	return ret;
 }
 #endif /* CONFIG_HW_BRANCH_TRACER */
+
+#ifdef CONFIG_KSYM_TRACER
+static int ksym_selftest_dummy;
+
+int
+trace_selftest_startup_ksym(struct tracer *trace, struct trace_array *tr)
+{
+	unsigned long count;
+	int ret;
+
+	/* start the tracing */
+	ret = tracer_init(trace, tr);
+	if (ret) {
+		warn_failed_init_tracer(trace, ret);
+		return ret;
+	}
+
+	ksym_selftest_dummy = 0;
+	/* Register the read-write tracing request */
+
+	ret = process_new_ksym_entry("ksym_selftest_dummy",
+				     HW_BREAKPOINT_R | HW_BREAKPOINT_W,
+					(unsigned long)(&ksym_selftest_dummy));
+
+	if (ret < 0) {
+		printk(KERN_CONT "ksym_trace read-write startup test failed\n");
+		goto ret_path;
+	}
+	/* Perform a read and a write operation over the dummy variable to
+	 * trigger the tracer
+	 */
+	if (ksym_selftest_dummy == 0)
+		ksym_selftest_dummy++;
+
+	/* stop the tracing. */
+	tracing_stop();
+	/* check the trace buffer */
+	ret = trace_test_buffer(tr, &count);
+	trace->reset(tr);
+	tracing_start();
+
+	/* read & write operations - one each is performed on the dummy variable
+	 * triggering two entries in the trace buffer
+	 */
+	if (!ret && count != 2) {
+		printk(KERN_CONT "Ksym tracer startup test failed");
+		ret = -1;
+	}
+
+ret_path:
+	return ret;
+}
+#endif /* CONFIG_KSYM_TRACER */
+
diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c
index 527e17e..57501d9 100644
--- a/kernel/trace/trace_syscalls.c
+++ b/kernel/trace/trace_syscalls.c
@@ -14,6 +14,43 @@
 static DECLARE_BITMAP(enabled_enter_syscalls, NR_syscalls);
 static DECLARE_BITMAP(enabled_exit_syscalls, NR_syscalls);
 
+extern unsigned long __start_syscalls_metadata[];
+extern unsigned long __stop_syscalls_metadata[];
+
+static struct syscall_metadata **syscalls_metadata;
+
+static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
+{
+	struct syscall_metadata *start;
+	struct syscall_metadata *stop;
+	char str[KSYM_SYMBOL_LEN];
+
+
+	start = (struct syscall_metadata *)__start_syscalls_metadata;
+	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
+	kallsyms_lookup(syscall, NULL, NULL, NULL, str);
+
+	for ( ; start < stop; start++) {
+		/*
+		 * Only compare after the "sys" prefix. Archs that use
+		 * syscall wrappers may have syscalls symbols aliases prefixed
+		 * with "SyS" instead of "sys", leading to an unwanted
+		 * mismatch.
+		 */
+		if (start->name && !strcmp(start->name + 3, str + 3))
+			return start;
+	}
+	return NULL;
+}
+
+static struct syscall_metadata *syscall_nr_to_meta(int nr)
+{
+	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
+		return NULL;
+
+	return syscalls_metadata[nr];
+}
+
 enum print_line_t
 print_syscall_enter(struct trace_iterator *iter, int flags)
 {
@@ -30,7 +67,7 @@
 	if (!entry)
 		goto end;
 
-	if (entry->enter_id != ent->type) {
+	if (entry->enter_event->id != ent->type) {
 		WARN_ON_ONCE(1);
 		goto end;
 	}
@@ -85,7 +122,7 @@
 		return TRACE_TYPE_HANDLED;
 	}
 
-	if (entry->exit_id != ent->type) {
+	if (entry->exit_event->id != ent->type) {
 		WARN_ON_ONCE(1);
 		return TRACE_TYPE_UNHANDLED;
 	}
@@ -103,24 +140,19 @@
 #define SYSCALL_FIELD(type, name)					\
 	sizeof(type) != sizeof(trace.name) ?				\
 		__bad_type_size() :					\
-		#type, #name, offsetof(typeof(trace), name), sizeof(trace.name)
+		#type, #name, offsetof(typeof(trace), name),		\
+		sizeof(trace.name), is_signed_type(type)
 
 int syscall_enter_format(struct ftrace_event_call *call, struct trace_seq *s)
 {
 	int i;
-	int nr;
 	int ret;
-	struct syscall_metadata *entry;
+	struct syscall_metadata *entry = call->data;
 	struct syscall_trace_enter trace;
 	int offset = offsetof(struct syscall_trace_enter, args);
 
-	nr = syscall_name_to_nr(call->data);
-	entry = syscall_nr_to_meta(nr);
-
-	if (!entry)
-		return 0;
-
-	ret = trace_seq_printf(s, "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n",
+	ret = trace_seq_printf(s, "\tfield:%s %s;\toffset:%zu;\tsize:%zu;"
+			       "\tsigned:%u;\n",
 			       SYSCALL_FIELD(int, nr));
 	if (!ret)
 		return 0;
@@ -130,8 +162,10 @@
 				        entry->args[i]);
 		if (!ret)
 			return 0;
-		ret = trace_seq_printf(s, "\toffset:%d;\tsize:%zu;\n", offset,
-				       sizeof(unsigned long));
+		ret = trace_seq_printf(s, "\toffset:%d;\tsize:%zu;"
+				       "\tsigned:%u;\n", offset,
+				       sizeof(unsigned long),
+				       is_signed_type(unsigned long));
 		if (!ret)
 			return 0;
 		offset += sizeof(unsigned long);
@@ -163,8 +197,10 @@
 	struct syscall_trace_exit trace;
 
 	ret = trace_seq_printf(s,
-			       "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
-			       "\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n",
+			       "\tfield:%s %s;\toffset:%zu;\tsize:%zu;"
+			       "\tsigned:%u;\n"
+			       "\tfield:%s %s;\toffset:%zu;\tsize:%zu;"
+			       "\tsigned:%u;\n",
 			       SYSCALL_FIELD(int, nr),
 			       SYSCALL_FIELD(long, ret));
 	if (!ret)
@@ -176,22 +212,19 @@
 int syscall_enter_define_fields(struct ftrace_event_call *call)
 {
 	struct syscall_trace_enter trace;
-	struct syscall_metadata *meta;
+	struct syscall_metadata *meta = call->data;
 	int ret;
-	int nr;
 	int i;
 	int offset = offsetof(typeof(trace), args);
 
-	nr = syscall_name_to_nr(call->data);
-	meta = syscall_nr_to_meta(nr);
-
-	if (!meta)
-		return 0;
-
 	ret = trace_define_common_fields(call);
 	if (ret)
 		return ret;
 
+	ret = trace_define_field(call, SYSCALL_FIELD(int, nr), FILTER_OTHER);
+	if (ret)
+		return ret;
+
 	for (i = 0; i < meta->nb_args; i++) {
 		ret = trace_define_field(call, meta->types[i],
 					 meta->args[i], offset,
@@ -212,7 +245,11 @@
 	if (ret)
 		return ret;
 
-	ret = trace_define_field(call, SYSCALL_FIELD(long, ret), 0,
+	ret = trace_define_field(call, SYSCALL_FIELD(int, nr), FILTER_OTHER);
+	if (ret)
+		return ret;
+
+	ret = trace_define_field(call, SYSCALL_FIELD(long, ret),
 				 FILTER_OTHER);
 
 	return ret;
@@ -239,8 +276,8 @@
 
 	size = sizeof(*entry) + sizeof(unsigned long) * sys_data->nb_args;
 
-	event = trace_current_buffer_lock_reserve(&buffer, sys_data->enter_id,
-						  size, 0, 0);
+	event = trace_current_buffer_lock_reserve(&buffer,
+			sys_data->enter_event->id, size, 0, 0);
 	if (!event)
 		return;
 
@@ -271,8 +308,8 @@
 	if (!sys_data)
 		return;
 
-	event = trace_current_buffer_lock_reserve(&buffer, sys_data->exit_id,
-				sizeof(*entry), 0, 0);
+	event = trace_current_buffer_lock_reserve(&buffer,
+			sys_data->exit_event->id, sizeof(*entry), 0, 0);
 	if (!event)
 		return;
 
@@ -285,14 +322,12 @@
 		trace_current_buffer_unlock_commit(buffer, event, 0, 0);
 }
 
-int reg_event_syscall_enter(void *ptr)
+int reg_event_syscall_enter(struct ftrace_event_call *call)
 {
 	int ret = 0;
 	int num;
-	char *name;
 
-	name = (char *)ptr;
-	num = syscall_name_to_nr(name);
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 	if (num < 0 || num >= NR_syscalls)
 		return -ENOSYS;
 	mutex_lock(&syscall_trace_lock);
@@ -309,13 +344,11 @@
 	return ret;
 }
 
-void unreg_event_syscall_enter(void *ptr)
+void unreg_event_syscall_enter(struct ftrace_event_call *call)
 {
 	int num;
-	char *name;
 
-	name = (char *)ptr;
-	num = syscall_name_to_nr(name);
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 	if (num < 0 || num >= NR_syscalls)
 		return;
 	mutex_lock(&syscall_trace_lock);
@@ -326,14 +359,12 @@
 	mutex_unlock(&syscall_trace_lock);
 }
 
-int reg_event_syscall_exit(void *ptr)
+int reg_event_syscall_exit(struct ftrace_event_call *call)
 {
 	int ret = 0;
 	int num;
-	char *name;
 
-	name = (char *)ptr;
-	num = syscall_name_to_nr(name);
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 	if (num < 0 || num >= NR_syscalls)
 		return -ENOSYS;
 	mutex_lock(&syscall_trace_lock);
@@ -350,13 +381,11 @@
 	return ret;
 }
 
-void unreg_event_syscall_exit(void *ptr)
+void unreg_event_syscall_exit(struct ftrace_event_call *call)
 {
 	int num;
-	char *name;
 
-	name = (char *)ptr;
-	num = syscall_name_to_nr(name);
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 	if (num < 0 || num >= NR_syscalls)
 		return;
 	mutex_lock(&syscall_trace_lock);
@@ -367,13 +396,44 @@
 	mutex_unlock(&syscall_trace_lock);
 }
 
-struct trace_event event_syscall_enter = {
-	.trace			= print_syscall_enter,
-};
+int init_syscall_trace(struct ftrace_event_call *call)
+{
+	int id;
 
-struct trace_event event_syscall_exit = {
-	.trace			= print_syscall_exit,
-};
+	id = register_ftrace_event(call->event);
+	if (!id)
+		return -ENODEV;
+	call->id = id;
+	INIT_LIST_HEAD(&call->fields);
+	return 0;
+}
+
+int __init init_ftrace_syscalls(void)
+{
+	struct syscall_metadata *meta;
+	unsigned long addr;
+	int i;
+
+	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
+					NR_syscalls, GFP_KERNEL);
+	if (!syscalls_metadata) {
+		WARN_ON(1);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < NR_syscalls; i++) {
+		addr = arch_syscall_addr(i);
+		meta = find_syscall_meta(addr);
+		if (!meta)
+			continue;
+
+		meta->syscall_nr = i;
+		syscalls_metadata[i] = meta;
+	}
+
+	return 0;
+}
+core_initcall(init_ftrace_syscalls);
 
 #ifdef CONFIG_EVENT_PROFILE
 
@@ -387,8 +447,10 @@
 	struct syscall_metadata *sys_data;
 	struct syscall_trace_enter *rec;
 	unsigned long flags;
+	char *trace_buf;
 	char *raw_data;
 	int syscall_nr;
+	int rctx;
 	int size;
 	int cpu;
 
@@ -412,41 +474,42 @@
 	/* Protect the per cpu buffer, begin the rcu read side */
 	local_irq_save(flags);
 
+	rctx = perf_swevent_get_recursion_context();
+	if (rctx < 0)
+		goto end_recursion;
+
 	cpu = smp_processor_id();
 
-	if (in_nmi())
-		raw_data = rcu_dereference(trace_profile_buf_nmi);
-	else
-		raw_data = rcu_dereference(trace_profile_buf);
+	trace_buf = rcu_dereference(perf_trace_buf);
 
-	if (!raw_data)
+	if (!trace_buf)
 		goto end;
 
-	raw_data = per_cpu_ptr(raw_data, cpu);
+	raw_data = per_cpu_ptr(trace_buf, cpu);
 
 	/* zero the dead bytes from align to not leak stack to user */
 	*(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
 
 	rec = (struct syscall_trace_enter *) raw_data;
 	tracing_generic_entry_update(&rec->ent, 0, 0);
-	rec->ent.type = sys_data->enter_id;
+	rec->ent.type = sys_data->enter_event->id;
 	rec->nr = syscall_nr;
 	syscall_get_arguments(current, regs, 0, sys_data->nb_args,
 			       (unsigned long *)&rec->args);
-	perf_tp_event(sys_data->enter_id, 0, 1, rec, size);
+	perf_tp_event(sys_data->enter_event->id, 0, 1, rec, size);
 
 end:
+	perf_swevent_put_recursion_context(rctx);
+end_recursion:
 	local_irq_restore(flags);
 }
 
-int reg_prof_syscall_enter(char *name)
+int prof_sysenter_enable(struct ftrace_event_call *call)
 {
 	int ret = 0;
 	int num;
 
-	num = syscall_name_to_nr(name);
-	if (num < 0 || num >= NR_syscalls)
-		return -ENOSYS;
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
 	if (!sys_prof_refcount_enter)
@@ -462,13 +525,11 @@
 	return ret;
 }
 
-void unreg_prof_syscall_enter(char *name)
+void prof_sysenter_disable(struct ftrace_event_call *call)
 {
 	int num;
 
-	num = syscall_name_to_nr(name);
-	if (num < 0 || num >= NR_syscalls)
-		return;
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
 	sys_prof_refcount_enter--;
@@ -484,7 +545,9 @@
 	struct syscall_trace_exit *rec;
 	unsigned long flags;
 	int syscall_nr;
+	char *trace_buf;
 	char *raw_data;
+	int rctx;
 	int size;
 	int cpu;
 
@@ -510,17 +573,19 @@
 
 	/* Protect the per cpu buffer, begin the rcu read side */
 	local_irq_save(flags);
+
+	rctx = perf_swevent_get_recursion_context();
+	if (rctx < 0)
+		goto end_recursion;
+
 	cpu = smp_processor_id();
 
-	if (in_nmi())
-		raw_data = rcu_dereference(trace_profile_buf_nmi);
-	else
-		raw_data = rcu_dereference(trace_profile_buf);
+	trace_buf = rcu_dereference(perf_trace_buf);
 
-	if (!raw_data)
+	if (!trace_buf)
 		goto end;
 
-	raw_data = per_cpu_ptr(raw_data, cpu);
+	raw_data = per_cpu_ptr(trace_buf, cpu);
 
 	/* zero the dead bytes from align to not leak stack to user */
 	*(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
@@ -528,24 +593,24 @@
 	rec = (struct syscall_trace_exit *)raw_data;
 
 	tracing_generic_entry_update(&rec->ent, 0, 0);
-	rec->ent.type = sys_data->exit_id;
+	rec->ent.type = sys_data->exit_event->id;
 	rec->nr = syscall_nr;
 	rec->ret = syscall_get_return_value(current, regs);
 
-	perf_tp_event(sys_data->exit_id, 0, 1, rec, size);
+	perf_tp_event(sys_data->exit_event->id, 0, 1, rec, size);
 
 end:
+	perf_swevent_put_recursion_context(rctx);
+end_recursion:
 	local_irq_restore(flags);
 }
 
-int reg_prof_syscall_exit(char *name)
+int prof_sysexit_enable(struct ftrace_event_call *call)
 {
 	int ret = 0;
 	int num;
 
-	num = syscall_name_to_nr(name);
-	if (num < 0 || num >= NR_syscalls)
-		return -ENOSYS;
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
 	if (!sys_prof_refcount_exit)
@@ -561,13 +626,11 @@
 	return ret;
 }
 
-void unreg_prof_syscall_exit(char *name)
+void prof_sysexit_disable(struct ftrace_event_call *call)
 {
 	int num;
 
-	num = syscall_name_to_nr(name);
-	if (num < 0 || num >= NR_syscalls)
-		return;
+	num = ((struct syscall_metadata *)call->data)->syscall_nr;
 
 	mutex_lock(&syscall_trace_lock);
 	sys_prof_refcount_exit--;
diff --git a/kernel/user-return-notifier.c b/kernel/user-return-notifier.c
new file mode 100644
index 0000000..eb27fd3
--- /dev/null
+++ b/kernel/user-return-notifier.c
@@ -0,0 +1,44 @@
+
+#include <linux/user-return-notifier.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+
+static DEFINE_PER_CPU(struct hlist_head, return_notifier_list);
+
+/*
+ * Request a notification when the current cpu returns to userspace.  Must be
+ * called in atomic context.  The notifier will also be called in atomic
+ * context.
+ */
+void user_return_notifier_register(struct user_return_notifier *urn)
+{
+	set_tsk_thread_flag(current, TIF_USER_RETURN_NOTIFY);
+	hlist_add_head(&urn->link, &__get_cpu_var(return_notifier_list));
+}
+EXPORT_SYMBOL_GPL(user_return_notifier_register);
+
+/*
+ * Removes a registered user return notifier.  Must be called from atomic
+ * context, and from the same cpu registration occured in.
+ */
+void user_return_notifier_unregister(struct user_return_notifier *urn)
+{
+	hlist_del(&urn->link);
+	if (hlist_empty(&__get_cpu_var(return_notifier_list)))
+		clear_tsk_thread_flag(current, TIF_USER_RETURN_NOTIFY);
+}
+EXPORT_SYMBOL_GPL(user_return_notifier_unregister);
+
+/* Calls registered user return notifiers */
+void fire_user_return_notifiers(void)
+{
+	struct user_return_notifier *urn;
+	struct hlist_node *tmp1, *tmp2;
+	struct hlist_head *head;
+
+	head = &get_cpu_var(return_notifier_list);
+	hlist_for_each_entry_safe(urn, tmp1, tmp2, head, link)
+		urn->on_user_return(urn);
+	put_cpu_var(return_notifier_list);
+}
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index 69eae35..a2cd77e 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -57,78 +57,47 @@
 #define proc_do_uts_string NULL
 #endif
 
-
-#ifdef CONFIG_SYSCTL_SYSCALL
-/* The generic string strategy routine: */
-static int sysctl_uts_string(ctl_table *table,
-		  void __user *oldval, size_t __user *oldlenp,
-		  void __user *newval, size_t newlen)
-{
-	struct ctl_table uts_table;
-	int r, write;
-	write = newval && newlen;
-	memcpy(&uts_table, table, sizeof(uts_table));
-	uts_table.data = get_uts(table, write);
-	r = sysctl_string(&uts_table, oldval, oldlenp, newval, newlen);
-	put_uts(table, write, uts_table.data);
-	return r;
-}
-#else
-#define sysctl_uts_string NULL
-#endif
-
 static struct ctl_table uts_kern_table[] = {
 	{
-		.ctl_name	= KERN_OSTYPE,
 		.procname	= "ostype",
 		.data		= init_uts_ns.name.sysname,
 		.maxlen		= sizeof(init_uts_ns.name.sysname),
 		.mode		= 0444,
 		.proc_handler	= proc_do_uts_string,
-		.strategy	= sysctl_uts_string,
 	},
 	{
-		.ctl_name	= KERN_OSRELEASE,
 		.procname	= "osrelease",
 		.data		= init_uts_ns.name.release,
 		.maxlen		= sizeof(init_uts_ns.name.release),
 		.mode		= 0444,
 		.proc_handler	= proc_do_uts_string,
-		.strategy	= sysctl_uts_string,
 	},
 	{
-		.ctl_name	= KERN_VERSION,
 		.procname	= "version",
 		.data		= init_uts_ns.name.version,
 		.maxlen		= sizeof(init_uts_ns.name.version),
 		.mode		= 0444,
 		.proc_handler	= proc_do_uts_string,
-		.strategy	= sysctl_uts_string,
 	},
 	{
-		.ctl_name	= KERN_NODENAME,
 		.procname	= "hostname",
 		.data		= init_uts_ns.name.nodename,
 		.maxlen		= sizeof(init_uts_ns.name.nodename),
 		.mode		= 0644,
 		.proc_handler	= proc_do_uts_string,
-		.strategy	= sysctl_uts_string,
 	},
 	{
-		.ctl_name	= KERN_DOMAINNAME,
 		.procname	= "domainname",
 		.data		= init_uts_ns.name.domainname,
 		.maxlen		= sizeof(init_uts_ns.name.domainname),
 		.mode		= 0644,
 		.proc_handler	= proc_do_uts_string,
-		.strategy	= sysctl_uts_string,
 	},
 	{}
 };
 
 static struct ctl_table uts_root_table[] = {
 	{
-		.ctl_name	= CTL_KERN,
 		.procname	= "kernel",
 		.mode		= 0555,
 		.child		= uts_kern_table,
diff --git a/lib/Kconfig b/lib/Kconfig
index bb1326d..1cfe516 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -200,4 +200,7 @@
 config GENERIC_ATOMIC64
        bool
 
+config LRU_CACHE
+	tristate
+
 endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 234ceb1..0b8f359 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -750,7 +750,7 @@
 config RCU_CPU_STALL_DETECTOR
 	bool "Check for stalled CPUs delaying RCU grace periods"
 	depends on TREE_RCU || TREE_PREEMPT_RCU
-	default n
+	default y
 	help
 	  This option causes RCU to printk information on which
 	  CPUs are delaying the current grace period, but only when
@@ -912,7 +912,7 @@
 
 config SYSCTL_SYSCALL_CHECK
 	bool "Sysctl checks"
-	depends on SYSCTL_SYSCALL
+	depends on SYSCTL
 	---help---
 	  sys_sysctl uses binary paths that have been found challenging
 	  to properly maintain and use. This enables checks that help
diff --git a/lib/Makefile b/lib/Makefile
index 2e78277..347ad8d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -91,6 +91,8 @@
 
 obj-$(CONFIG_NLATTR) += nlattr.o
 
+obj-$(CONFIG_LRU_CACHE) += lru_cache.o
+
 obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o
 
 obj-$(CONFIG_GENERIC_CSUM) += checksum.o
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index 39f1029..4ebfa5a 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -5,10 +5,13 @@
  * relegated to obsolescence, but used by various less
  * important (or lazy) subsystems.
  */
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/kallsyms.h>
 #include <linux/semaphore.h>
+#include <linux/smp_lock.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/bkl.h>
 
 /*
  * The 'big kernel lock'
@@ -113,21 +116,26 @@
  * This cannot happen asynchronously, so we only need to
  * worry about other CPU's.
  */
-void __lockfunc lock_kernel(void)
+void __lockfunc _lock_kernel(const char *func, const char *file, int line)
 {
-	int depth = current->lock_depth+1;
+	int depth = current->lock_depth + 1;
+
+	trace_lock_kernel(func, file, line);
+
 	if (likely(!depth))
 		__lock_kernel();
 	current->lock_depth = depth;
 }
 
-void __lockfunc unlock_kernel(void)
+void __lockfunc _unlock_kernel(const char *func, const char *file, int line)
 {
 	BUG_ON(current->lock_depth < 0);
 	if (likely(--current->lock_depth < 0))
 		__unlock_kernel();
+
+	trace_unlock_kernel(func, file, line);
 }
 
-EXPORT_SYMBOL(lock_kernel);
-EXPORT_SYMBOL(unlock_kernel);
+EXPORT_SYMBOL(_lock_kernel);
+EXPORT_SYMBOL(_unlock_kernel);
 
diff --git a/lib/lru_cache.c b/lib/lru_cache.c
new file mode 100644
index 0000000..270de9d
--- /dev/null
+++ b/lib/lru_cache.c
@@ -0,0 +1,560 @@
+/*
+   lru_cache.c
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2003-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2003-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+   Copyright (C) 2003-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+
+   drbd is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   drbd is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with drbd; see the file COPYING.  If not, write to
+   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/string.h> /* for memset */
+#include <linux/seq_file.h> /* for seq_printf */
+#include <linux/lru_cache.h>
+
+MODULE_AUTHOR("Philipp Reisner <phil@linbit.com>, "
+	      "Lars Ellenberg <lars@linbit.com>");
+MODULE_DESCRIPTION("lru_cache - Track sets of hot objects");
+MODULE_LICENSE("GPL");
+
+/* this is developers aid only.
+ * it catches concurrent access (lack of locking on the users part) */
+#define PARANOIA_ENTRY() do {		\
+	BUG_ON(!lc);			\
+	BUG_ON(!lc->nr_elements);	\
+	BUG_ON(test_and_set_bit(__LC_PARANOIA, &lc->flags)); \
+} while (0)
+
+#define RETURN(x...)     do { \
+	clear_bit(__LC_PARANOIA, &lc->flags); \
+	smp_mb__after_clear_bit(); return x ; } while (0)
+
+/* BUG() if e is not one of the elements tracked by lc */
+#define PARANOIA_LC_ELEMENT(lc, e) do {	\
+	struct lru_cache *lc_ = (lc);	\
+	struct lc_element *e_ = (e);	\
+	unsigned i = e_->lc_index;	\
+	BUG_ON(i >= lc_->nr_elements);	\
+	BUG_ON(lc_->lc_element[i] != e_); } while (0)
+
+/**
+ * lc_create - prepares to track objects in an active set
+ * @name: descriptive name only used in lc_seq_printf_stats and lc_seq_dump_details
+ * @e_count: number of elements allowed to be active simultaneously
+ * @e_size: size of the tracked objects
+ * @e_off: offset to the &struct lc_element member in a tracked object
+ *
+ * Returns a pointer to a newly initialized struct lru_cache on success,
+ * or NULL on (allocation) failure.
+ */
+struct lru_cache *lc_create(const char *name, struct kmem_cache *cache,
+		unsigned e_count, size_t e_size, size_t e_off)
+{
+	struct hlist_head *slot = NULL;
+	struct lc_element **element = NULL;
+	struct lru_cache *lc;
+	struct lc_element *e;
+	unsigned cache_obj_size = kmem_cache_size(cache);
+	unsigned i;
+
+	WARN_ON(cache_obj_size < e_size);
+	if (cache_obj_size < e_size)
+		return NULL;
+
+	/* e_count too big; would probably fail the allocation below anyways.
+	 * for typical use cases, e_count should be few thousand at most. */
+	if (e_count > LC_MAX_ACTIVE)
+		return NULL;
+
+	slot = kzalloc(e_count * sizeof(struct hlist_head*), GFP_KERNEL);
+	if (!slot)
+		goto out_fail;
+	element = kzalloc(e_count * sizeof(struct lc_element *), GFP_KERNEL);
+	if (!element)
+		goto out_fail;
+
+	lc = kzalloc(sizeof(*lc), GFP_KERNEL);
+	if (!lc)
+		goto out_fail;
+
+	INIT_LIST_HEAD(&lc->in_use);
+	INIT_LIST_HEAD(&lc->lru);
+	INIT_LIST_HEAD(&lc->free);
+
+	lc->name = name;
+	lc->element_size = e_size;
+	lc->element_off = e_off;
+	lc->nr_elements = e_count;
+	lc->new_number = LC_FREE;
+	lc->lc_cache = cache;
+	lc->lc_element = element;
+	lc->lc_slot = slot;
+
+	/* preallocate all objects */
+	for (i = 0; i < e_count; i++) {
+		void *p = kmem_cache_alloc(cache, GFP_KERNEL);
+		if (!p)
+			break;
+		memset(p, 0, lc->element_size);
+		e = p + e_off;
+		e->lc_index = i;
+		e->lc_number = LC_FREE;
+		list_add(&e->list, &lc->free);
+		element[i] = e;
+	}
+	if (i == e_count)
+		return lc;
+
+	/* else: could not allocate all elements, give up */
+	for (i--; i; i--) {
+		void *p = element[i];
+		kmem_cache_free(cache, p - e_off);
+	}
+	kfree(lc);
+out_fail:
+	kfree(element);
+	kfree(slot);
+	return NULL;
+}
+
+void lc_free_by_index(struct lru_cache *lc, unsigned i)
+{
+	void *p = lc->lc_element[i];
+	WARN_ON(!p);
+	if (p) {
+		p -= lc->element_off;
+		kmem_cache_free(lc->lc_cache, p);
+	}
+}
+
+/**
+ * lc_destroy - frees memory allocated by lc_create()
+ * @lc: the lru cache to destroy
+ */
+void lc_destroy(struct lru_cache *lc)
+{
+	unsigned i;
+	if (!lc)
+		return;
+	for (i = 0; i < lc->nr_elements; i++)
+		lc_free_by_index(lc, i);
+	kfree(lc->lc_element);
+	kfree(lc->lc_slot);
+	kfree(lc);
+}
+
+/**
+ * lc_reset - does a full reset for @lc and the hash table slots.
+ * @lc: the lru cache to operate on
+ *
+ * It is roughly the equivalent of re-allocating a fresh lru_cache object,
+ * basically a short cut to lc_destroy(lc); lc = lc_create(...);
+ */
+void lc_reset(struct lru_cache *lc)
+{
+	unsigned i;
+
+	INIT_LIST_HEAD(&lc->in_use);
+	INIT_LIST_HEAD(&lc->lru);
+	INIT_LIST_HEAD(&lc->free);
+	lc->used = 0;
+	lc->hits = 0;
+	lc->misses = 0;
+	lc->starving = 0;
+	lc->dirty = 0;
+	lc->changed = 0;
+	lc->flags = 0;
+	lc->changing_element = NULL;
+	lc->new_number = LC_FREE;
+	memset(lc->lc_slot, 0, sizeof(struct hlist_head) * lc->nr_elements);
+
+	for (i = 0; i < lc->nr_elements; i++) {
+		struct lc_element *e = lc->lc_element[i];
+		void *p = e;
+		p -= lc->element_off;
+		memset(p, 0, lc->element_size);
+		/* re-init it */
+		e->lc_index = i;
+		e->lc_number = LC_FREE;
+		list_add(&e->list, &lc->free);
+	}
+}
+
+/**
+ * lc_seq_printf_stats - print stats about @lc into @seq
+ * @seq: the seq_file to print into
+ * @lc: the lru cache to print statistics of
+ */
+size_t lc_seq_printf_stats(struct seq_file *seq, struct lru_cache *lc)
+{
+	/* NOTE:
+	 * total calls to lc_get are
+	 * (starving + hits + misses)
+	 * misses include "dirty" count (update from an other thread in
+	 * progress) and "changed", when this in fact lead to an successful
+	 * update of the cache.
+	 */
+	return seq_printf(seq, "\t%s: used:%u/%u "
+		"hits:%lu misses:%lu starving:%lu dirty:%lu changed:%lu\n",
+		lc->name, lc->used, lc->nr_elements,
+		lc->hits, lc->misses, lc->starving, lc->dirty, lc->changed);
+}
+
+static struct hlist_head *lc_hash_slot(struct lru_cache *lc, unsigned int enr)
+{
+	return  lc->lc_slot + (enr % lc->nr_elements);
+}
+
+
+/**
+ * lc_find - find element by label, if present in the hash table
+ * @lc: The lru_cache object
+ * @enr: element number
+ *
+ * Returns the pointer to an element, if the element with the requested
+ * "label" or element number is present in the hash table,
+ * or NULL if not found. Does not change the refcnt.
+ */
+struct lc_element *lc_find(struct lru_cache *lc, unsigned int enr)
+{
+	struct hlist_node *n;
+	struct lc_element *e;
+
+	BUG_ON(!lc);
+	BUG_ON(!lc->nr_elements);
+	hlist_for_each_entry(e, n, lc_hash_slot(lc, enr), colision) {
+		if (e->lc_number == enr)
+			return e;
+	}
+	return NULL;
+}
+
+/* returned element will be "recycled" immediately */
+static struct lc_element *lc_evict(struct lru_cache *lc)
+{
+	struct list_head  *n;
+	struct lc_element *e;
+
+	if (list_empty(&lc->lru))
+		return NULL;
+
+	n = lc->lru.prev;
+	e = list_entry(n, struct lc_element, list);
+
+	PARANOIA_LC_ELEMENT(lc, e);
+
+	list_del(&e->list);
+	hlist_del(&e->colision);
+	return e;
+}
+
+/**
+ * lc_del - removes an element from the cache
+ * @lc: The lru_cache object
+ * @e: The element to remove
+ *
+ * @e must be unused (refcnt == 0). Moves @e from "lru" to "free" list,
+ * sets @e->enr to %LC_FREE.
+ */
+void lc_del(struct lru_cache *lc, struct lc_element *e)
+{
+	PARANOIA_ENTRY();
+	PARANOIA_LC_ELEMENT(lc, e);
+	BUG_ON(e->refcnt);
+
+	e->lc_number = LC_FREE;
+	hlist_del_init(&e->colision);
+	list_move(&e->list, &lc->free);
+	RETURN();
+}
+
+static struct lc_element *lc_get_unused_element(struct lru_cache *lc)
+{
+	struct list_head *n;
+
+	if (list_empty(&lc->free))
+		return lc_evict(lc);
+
+	n = lc->free.next;
+	list_del(n);
+	return list_entry(n, struct lc_element, list);
+}
+
+static int lc_unused_element_available(struct lru_cache *lc)
+{
+	if (!list_empty(&lc->free))
+		return 1; /* something on the free list */
+	if (!list_empty(&lc->lru))
+		return 1;  /* something to evict */
+
+	return 0;
+}
+
+
+/**
+ * lc_get - get element by label, maybe change the active set
+ * @lc: the lru cache to operate on
+ * @enr: the label to look up
+ *
+ * Finds an element in the cache, increases its usage count,
+ * "touches" and returns it.
+ *
+ * In case the requested number is not present, it needs to be added to the
+ * cache. Therefore it is possible that an other element becomes evicted from
+ * the cache. In either case, the user is notified so he is able to e.g. keep
+ * a persistent log of the cache changes, and therefore the objects in use.
+ *
+ * Return values:
+ *  NULL
+ *     The cache was marked %LC_STARVING,
+ *     or the requested label was not in the active set
+ *     and a changing transaction is still pending (@lc was marked %LC_DIRTY).
+ *     Or no unused or free element could be recycled (@lc will be marked as
+ *     %LC_STARVING, blocking further lc_get() operations).
+ *
+ *  pointer to the element with the REQUESTED element number.
+ *     In this case, it can be used right away
+ *
+ *  pointer to an UNUSED element with some different element number,
+ *          where that different number may also be %LC_FREE.
+ *
+ *          In this case, the cache is marked %LC_DIRTY (blocking further changes),
+ *          and the returned element pointer is removed from the lru list and
+ *          hash collision chains.  The user now should do whatever housekeeping
+ *          is necessary.
+ *          Then he must call lc_changed(lc,element_pointer), to finish
+ *          the change.
+ *
+ * NOTE: The user needs to check the lc_number on EACH use, so he recognizes
+ *       any cache set change.
+ */
+struct lc_element *lc_get(struct lru_cache *lc, unsigned int enr)
+{
+	struct lc_element *e;
+
+	PARANOIA_ENTRY();
+	if (lc->flags & LC_STARVING) {
+		++lc->starving;
+		RETURN(NULL);
+	}
+
+	e = lc_find(lc, enr);
+	if (e) {
+		++lc->hits;
+		if (e->refcnt++ == 0)
+			lc->used++;
+		list_move(&e->list, &lc->in_use); /* Not evictable... */
+		RETURN(e);
+	}
+
+	++lc->misses;
+
+	/* In case there is nothing available and we can not kick out
+	 * the LRU element, we have to wait ...
+	 */
+	if (!lc_unused_element_available(lc)) {
+		__set_bit(__LC_STARVING, &lc->flags);
+		RETURN(NULL);
+	}
+
+	/* it was not present in the active set.
+	 * we are going to recycle an unused (or even "free") element.
+	 * user may need to commit a transaction to record that change.
+	 * we serialize on flags & TF_DIRTY */
+	if (test_and_set_bit(__LC_DIRTY, &lc->flags)) {
+		++lc->dirty;
+		RETURN(NULL);
+	}
+
+	e = lc_get_unused_element(lc);
+	BUG_ON(!e);
+
+	clear_bit(__LC_STARVING, &lc->flags);
+	BUG_ON(++e->refcnt != 1);
+	lc->used++;
+
+	lc->changing_element = e;
+	lc->new_number = enr;
+
+	RETURN(e);
+}
+
+/* similar to lc_get,
+ * but only gets a new reference on an existing element.
+ * you either get the requested element, or NULL.
+ * will be consolidated into one function.
+ */
+struct lc_element *lc_try_get(struct lru_cache *lc, unsigned int enr)
+{
+	struct lc_element *e;
+
+	PARANOIA_ENTRY();
+	if (lc->flags & LC_STARVING) {
+		++lc->starving;
+		RETURN(NULL);
+	}
+
+	e = lc_find(lc, enr);
+	if (e) {
+		++lc->hits;
+		if (e->refcnt++ == 0)
+			lc->used++;
+		list_move(&e->list, &lc->in_use); /* Not evictable... */
+	}
+	RETURN(e);
+}
+
+/**
+ * lc_changed - tell @lc that the change has been recorded
+ * @lc: the lru cache to operate on
+ * @e: the element pending label change
+ */
+void lc_changed(struct lru_cache *lc, struct lc_element *e)
+{
+	PARANOIA_ENTRY();
+	BUG_ON(e != lc->changing_element);
+	PARANOIA_LC_ELEMENT(lc, e);
+	++lc->changed;
+	e->lc_number = lc->new_number;
+	list_add(&e->list, &lc->in_use);
+	hlist_add_head(&e->colision, lc_hash_slot(lc, lc->new_number));
+	lc->changing_element = NULL;
+	lc->new_number = LC_FREE;
+	clear_bit(__LC_DIRTY, &lc->flags);
+	smp_mb__after_clear_bit();
+	RETURN();
+}
+
+
+/**
+ * lc_put - give up refcnt of @e
+ * @lc: the lru cache to operate on
+ * @e: the element to put
+ *
+ * If refcnt reaches zero, the element is moved to the lru list,
+ * and a %LC_STARVING (if set) is cleared.
+ * Returns the new (post-decrement) refcnt.
+ */
+unsigned int lc_put(struct lru_cache *lc, struct lc_element *e)
+{
+	PARANOIA_ENTRY();
+	PARANOIA_LC_ELEMENT(lc, e);
+	BUG_ON(e->refcnt == 0);
+	BUG_ON(e == lc->changing_element);
+	if (--e->refcnt == 0) {
+		/* move it to the front of LRU. */
+		list_move(&e->list, &lc->lru);
+		lc->used--;
+		clear_bit(__LC_STARVING, &lc->flags);
+		smp_mb__after_clear_bit();
+	}
+	RETURN(e->refcnt);
+}
+
+/**
+ * lc_element_by_index
+ * @lc: the lru cache to operate on
+ * @i: the index of the element to return
+ */
+struct lc_element *lc_element_by_index(struct lru_cache *lc, unsigned i)
+{
+	BUG_ON(i >= lc->nr_elements);
+	BUG_ON(lc->lc_element[i] == NULL);
+	BUG_ON(lc->lc_element[i]->lc_index != i);
+	return lc->lc_element[i];
+}
+
+/**
+ * lc_index_of
+ * @lc: the lru cache to operate on
+ * @e: the element to query for its index position in lc->element
+ */
+unsigned int lc_index_of(struct lru_cache *lc, struct lc_element *e)
+{
+	PARANOIA_LC_ELEMENT(lc, e);
+	return e->lc_index;
+}
+
+/**
+ * lc_set - associate index with label
+ * @lc: the lru cache to operate on
+ * @enr: the label to set
+ * @index: the element index to associate label with.
+ *
+ * Used to initialize the active set to some previously recorded state.
+ */
+void lc_set(struct lru_cache *lc, unsigned int enr, int index)
+{
+	struct lc_element *e;
+
+	if (index < 0 || index >= lc->nr_elements)
+		return;
+
+	e = lc_element_by_index(lc, index);
+	e->lc_number = enr;
+
+	hlist_del_init(&e->colision);
+	hlist_add_head(&e->colision, lc_hash_slot(lc, enr));
+	list_move(&e->list, e->refcnt ? &lc->in_use : &lc->lru);
+}
+
+/**
+ * lc_dump - Dump a complete LRU cache to seq in textual form.
+ * @lc: the lru cache to operate on
+ * @seq: the &struct seq_file pointer to seq_printf into
+ * @utext: user supplied "heading" or other info
+ * @detail: function pointer the user may provide to dump further details
+ * of the object the lc_element is embedded in.
+ */
+void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char *utext,
+	     void (*detail) (struct seq_file *, struct lc_element *))
+{
+	unsigned int nr_elements = lc->nr_elements;
+	struct lc_element *e;
+	int i;
+
+	seq_printf(seq, "\tnn: lc_number refcnt %s\n ", utext);
+	for (i = 0; i < nr_elements; i++) {
+		e = lc_element_by_index(lc, i);
+		if (e->lc_number == LC_FREE) {
+			seq_printf(seq, "\t%2d: FREE\n", i);
+		} else {
+			seq_printf(seq, "\t%2d: %4u %4u    ", i,
+				   e->lc_number, e->refcnt);
+			detail(seq, e);
+		}
+	}
+}
+
+EXPORT_SYMBOL(lc_create);
+EXPORT_SYMBOL(lc_reset);
+EXPORT_SYMBOL(lc_destroy);
+EXPORT_SYMBOL(lc_set);
+EXPORT_SYMBOL(lc_del);
+EXPORT_SYMBOL(lc_try_get);
+EXPORT_SYMBOL(lc_find);
+EXPORT_SYMBOL(lc_get);
+EXPORT_SYMBOL(lc_put);
+EXPORT_SYMBOL(lc_changed);
+EXPORT_SYMBOL(lc_element_by_index);
+EXPORT_SYMBOL(lc_index_of);
+EXPORT_SYMBOL(lc_seq_printf_stats);
+EXPORT_SYMBOL(lc_seq_dump_details);
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 23abbd9..92cdd99 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -200,6 +200,9 @@
  * ensure that the addition of a single element in the tree cannot fail.  On
  * success, return zero, with preemption disabled.  On error, return -ENOMEM
  * with preemption not disabled.
+ *
+ * To make use of this facility, the radix tree must be initialised without
+ * __GFP_WAIT being passed to INIT_RADIX_TREE().
  */
 int radix_tree_preload(gfp_t gfp_mask)
 {
@@ -543,7 +546,6 @@
 }
 EXPORT_SYMBOL(radix_tree_tag_clear);
 
-#ifndef __KERNEL__	/* Only the test harness uses this at present */
 /**
  * radix_tree_tag_get - get a tag on a radix tree node
  * @root:		radix tree root
@@ -606,7 +608,6 @@
 	}
 }
 EXPORT_SYMBOL(radix_tree_tag_get);
-#endif
 
 /**
  *	radix_tree_next_hole    -    find the next hole (not-present entry)
diff --git a/lib/ratelimit.c b/lib/ratelimit.c
index 26187ed..09f5ce1 100644
--- a/lib/ratelimit.c
+++ b/lib/ratelimit.c
@@ -7,15 +7,12 @@
  * parameter. Now every user can use their own standalone ratelimit_state.
  *
  * This file is released under the GPLv2.
- *
  */
 
-#include <linux/kernel.h>
+#include <linux/ratelimit.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
 
-static DEFINE_SPINLOCK(ratelimit_lock);
-
 /*
  * __ratelimit - rate limiting
  * @rs: ratelimit_state data
@@ -23,35 +20,43 @@
  * This enforces a rate limit: not more than @rs->ratelimit_burst callbacks
  * in every @rs->ratelimit_jiffies
  */
-int __ratelimit(struct ratelimit_state *rs)
+int ___ratelimit(struct ratelimit_state *rs, const char *func)
 {
 	unsigned long flags;
+	int ret;
 
 	if (!rs->interval)
 		return 1;
 
-	spin_lock_irqsave(&ratelimit_lock, flags);
+	/*
+	 * If we contend on this state's lock then almost
+	 * by definition we are too busy to print a message,
+	 * in addition to the one that will be printed by
+	 * the entity that is holding the lock already:
+	 */
+	if (!spin_trylock_irqsave(&rs->lock, flags))
+		return 1;
+
 	if (!rs->begin)
 		rs->begin = jiffies;
 
 	if (time_is_before_jiffies(rs->begin + rs->interval)) {
 		if (rs->missed)
 			printk(KERN_WARNING "%s: %d callbacks suppressed\n",
-				__func__, rs->missed);
-		rs->begin = 0;
+				func, rs->missed);
+		rs->begin   = 0;
 		rs->printed = 0;
-		rs->missed = 0;
+		rs->missed  = 0;
 	}
-	if (rs->burst && rs->burst > rs->printed)
-		goto print;
+	if (rs->burst && rs->burst > rs->printed) {
+		rs->printed++;
+		ret = 1;
+	} else {
+		rs->missed++;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&rs->lock, flags);
 
-	rs->missed++;
-	spin_unlock_irqrestore(&ratelimit_lock, flags);
-	return 0;
-
-print:
-	rs->printed++;
-	spin_unlock_irqrestore(&ratelimit_lock, flags);
-	return 1;
+	return ret;
 }
-EXPORT_SYMBOL(__ratelimit);
+EXPORT_SYMBOL(___ratelimit);
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index ac25cd2..795472d 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -97,6 +97,8 @@
  */
 static DEFINE_SPINLOCK(io_tlb_lock);
 
+static int late_alloc;
+
 static int __init
 setup_io_tlb_npages(char *str)
 {
@@ -109,6 +111,7 @@
 		++str;
 	if (!strcmp(str, "force"))
 		swiotlb_force = 1;
+
 	return 1;
 }
 __setup("swiotlb=", setup_io_tlb_npages);
@@ -121,8 +124,9 @@
 	return phys_to_dma(hwdev, virt_to_phys(address));
 }
 
-static void swiotlb_print_info(unsigned long bytes)
+void swiotlb_print_info(void)
 {
+	unsigned long bytes = io_tlb_nslabs << IO_TLB_SHIFT;
 	phys_addr_t pstart, pend;
 
 	pstart = virt_to_phys(io_tlb_start);
@@ -140,7 +144,7 @@
  * structures for the software IO TLB used to implement the DMA API.
  */
 void __init
-swiotlb_init_with_default_size(size_t default_size)
+swiotlb_init_with_default_size(size_t default_size, int verbose)
 {
 	unsigned long i, bytes;
 
@@ -176,14 +180,14 @@
 	io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow);
 	if (!io_tlb_overflow_buffer)
 		panic("Cannot allocate SWIOTLB overflow buffer!\n");
-
-	swiotlb_print_info(bytes);
+	if (verbose)
+		swiotlb_print_info();
 }
 
 void __init
-swiotlb_init(void)
+swiotlb_init(int verbose)
 {
-	swiotlb_init_with_default_size(64 * (1<<20));	/* default to 64MB */
+	swiotlb_init_with_default_size(64 * (1<<20), verbose);	/* default to 64MB */
 }
 
 /*
@@ -260,7 +264,9 @@
 	if (!io_tlb_overflow_buffer)
 		goto cleanup4;
 
-	swiotlb_print_info(bytes);
+	swiotlb_print_info();
+
+	late_alloc = 1;
 
 	return 0;
 
@@ -281,6 +287,32 @@
 	return -ENOMEM;
 }
 
+void __init swiotlb_free(void)
+{
+	if (!io_tlb_overflow_buffer)
+		return;
+
+	if (late_alloc) {
+		free_pages((unsigned long)io_tlb_overflow_buffer,
+			   get_order(io_tlb_overflow));
+		free_pages((unsigned long)io_tlb_orig_addr,
+			   get_order(io_tlb_nslabs * sizeof(phys_addr_t)));
+		free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
+								 sizeof(int)));
+		free_pages((unsigned long)io_tlb_start,
+			   get_order(io_tlb_nslabs << IO_TLB_SHIFT));
+	} else {
+		free_bootmem_late(__pa(io_tlb_overflow_buffer),
+				  io_tlb_overflow);
+		free_bootmem_late(__pa(io_tlb_orig_addr),
+				  io_tlb_nslabs * sizeof(phys_addr_t));
+		free_bootmem_late(__pa(io_tlb_list),
+				  io_tlb_nslabs * sizeof(int));
+		free_bootmem_late(__pa(io_tlb_start),
+				  io_tlb_nslabs << IO_TLB_SHIFT);
+	}
+}
+
 static int is_swiotlb_buffer(phys_addr_t paddr)
 {
 	return paddr >= virt_to_phys(io_tlb_start) &&
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 11aee09..0e8ca03 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -604,10 +604,14 @@
 
 	/*
 	 * Finally, kill the kernel threads. We don't need to be RCU
-	 * safe anymore, since the bdi is gone from visibility.
+	 * safe anymore, since the bdi is gone from visibility. Force
+	 * unfreeze of the thread before calling kthread_stop(), otherwise
+	 * it would never exet if it is currently stuck in the refrigerator.
 	 */
-	list_for_each_entry(wb, &bdi->wb_list, list)
+	list_for_each_entry(wb, &bdi->wb_list, list) {
+		thaw_process(wb->task);
 		kthread_stop(wb->task);
+	}
 }
 
 /*
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 555d5d2..d1dc23c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -143,6 +143,30 @@
 	return init_bootmem_core(NODE_DATA(0)->bdata, start, 0, pages);
 }
 
+/*
+ * free_bootmem_late - free bootmem pages directly to page allocator
+ * @addr: starting address of the range
+ * @size: size of the range in bytes
+ *
+ * This is only useful when the bootmem allocator has already been torn
+ * down, but we are still initializing the system.  Pages are given directly
+ * to the page allocator, no bootmem metadata is updated because it is gone.
+ */
+void __init free_bootmem_late(unsigned long addr, unsigned long size)
+{
+	unsigned long cursor, end;
+
+	kmemleak_free_part(__va(addr), size);
+
+	cursor = PFN_UP(addr);
+	end = PFN_DOWN(addr + size);
+
+	for (; cursor < end; cursor++) {
+		__free_pages_bootmem(pfn_to_page(cursor), 0);
+		totalram_pages++;
+	}
+}
+
 static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
 {
 	int aligned;
diff --git a/mm/mmap.c b/mm/mmap.c
index 73f5e4b..292ddc3 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -20,7 +20,6 @@
 #include <linux/fs.h>
 #include <linux/personality.h>
 #include <linux/security.h>
-#include <linux/ima.h>
 #include <linux/hugetlb.h>
 #include <linux/profile.h>
 #include <linux/module.h>
@@ -1061,9 +1060,6 @@
 	error = security_file_mmap(file, reqprot, prot, flags, addr, 0);
 	if (error)
 		return error;
-	error = ima_file_mmap(file, prot);
-	if (error)
-		return error;
 
 	return mmap_region(file, addr, len, flags, vm_flags, pgoff);
 }
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 2c5d792..0b19943 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -821,7 +821,6 @@
 		      struct writeback_control *wbc, writepage_t writepage,
 		      void *data)
 {
-	struct backing_dev_info *bdi = mapping->backing_dev_info;
 	int ret = 0;
 	int done = 0;
 	struct pagevec pvec;
@@ -834,11 +833,6 @@
 	int range_whole = 0;
 	long nr_to_write = wbc->nr_to_write;
 
-	if (wbc->nonblocking && bdi_write_congested(bdi)) {
-		wbc->encountered_congestion = 1;
-		return 0;
-	}
-
 	pagevec_init(&pvec, 0);
 	if (wbc->range_cyclic) {
 		writeback_index = mapping->writeback_index; /* prev offset */
@@ -957,12 +951,6 @@
 					break;
 				}
 			}
-
-			if (wbc->nonblocking && bdi_write_congested(bdi)) {
-				wbc->encountered_congestion = 1;
-				done = 1;
-				break;
-			}
 		}
 		pagevec_release(&pvec);
 		cond_resched();
diff --git a/net/802/tr.c b/net/802/tr.c
index e874447..44acce4 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -635,19 +635,18 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table tr_table[] = {
 	{
-		.ctl_name	= NET_TR_RIF_TIMEOUT,
 		.procname	= "rif_timeout",
 		.data		= &sysctl_tr_rif_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ 0 },
+	{ },
 };
 
 static __initdata struct ctl_path tr_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "token-ring", .ctl_name = NET_TR, },
+	{ .procname = "net", },
+	{ .procname = "token-ring", },
 	{ }
 };
 #endif
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index a29c5ab..33f90e7 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -41,7 +41,7 @@
 
 /* Global VLAN variables */
 
-int vlan_net_id;
+int vlan_net_id __read_mostly;
 
 /* Our listing of VLAN group(s) */
 static struct hlist_head vlan_group_hash[VLAN_GRP_HASH_SIZE];
@@ -140,7 +140,7 @@
 	vlan_group_free(container_of(rcu, struct vlan_group, rcu));
 }
 
-void unregister_vlan_dev(struct net_device *dev)
+void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
 {
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	struct net_device *real_dev = vlan->real_dev;
@@ -159,12 +159,13 @@
 	if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
 		ops->ndo_vlan_rx_kill_vid(real_dev, vlan_id);
 
-	vlan_group_set_device(grp, vlan_id, NULL);
 	grp->nr_vlans--;
 
-	synchronize_net();
+	vlan_group_set_device(grp, vlan_id, NULL);
+	if (!grp->killall)
+		synchronize_net();
 
-	unregister_netdevice(dev);
+	unregister_netdevice_queue(dev, head);
 
 	/* If the group is now empty, kill off the group. */
 	if (grp->nr_vlans == 0) {
@@ -183,27 +184,6 @@
 	dev_put(real_dev);
 }
 
-static void vlan_transfer_operstate(const struct net_device *dev,
-				    struct net_device *vlandev)
-{
-	/* Have to respect userspace enforced dormant state
-	 * of real device, also must allow supplicant running
-	 * on VLAN device
-	 */
-	if (dev->operstate == IF_OPER_DORMANT)
-		netif_dormant_on(vlandev);
-	else
-		netif_dormant_off(vlandev);
-
-	if (netif_carrier_ok(dev)) {
-		if (!netif_carrier_ok(vlandev))
-			netif_carrier_on(vlandev);
-	} else {
-		if (netif_carrier_ok(vlandev))
-			netif_carrier_off(vlandev);
-	}
-}
-
 int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id)
 {
 	const char *name = real_dev->name;
@@ -261,7 +241,7 @@
 	/* Account for reference in struct vlan_dev_info */
 	dev_hold(real_dev);
 
-	vlan_transfer_operstate(real_dev, dev);
+	netif_stacked_transfer_operstate(real_dev, dev);
 	linkwatch_fire_event(dev); /* _MUST_ call rfc2863_policy() */
 
 	/* So, got the sucker initialized, now lets place
@@ -430,6 +410,8 @@
 	struct vlan_group *grp;
 	int i, flgs;
 	struct net_device *vlandev;
+	struct vlan_dev_info *vlan;
+	LIST_HEAD(list);
 
 	if (is_vlan_dev(dev))
 		__vlan_device_event(dev, event);
@@ -450,7 +432,7 @@
 			if (!vlandev)
 				continue;
 
-			vlan_transfer_operstate(dev, vlandev);
+			netif_stacked_transfer_operstate(dev, vlandev);
 		}
 		break;
 
@@ -505,8 +487,10 @@
 			if (!(flgs & IFF_UP))
 				continue;
 
-			dev_change_flags(vlandev, flgs & ~IFF_UP);
-			vlan_transfer_operstate(dev, vlandev);
+			vlan = vlan_dev_info(vlandev);
+			if (!(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
+				dev_change_flags(vlandev, flgs & ~IFF_UP);
+			netif_stacked_transfer_operstate(dev, vlandev);
 		}
 		break;
 
@@ -521,13 +505,17 @@
 			if (flgs & IFF_UP)
 				continue;
 
-			dev_change_flags(vlandev, flgs | IFF_UP);
-			vlan_transfer_operstate(dev, vlandev);
+			vlan = vlan_dev_info(vlandev);
+			if (!(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
+				dev_change_flags(vlandev, flgs | IFF_UP);
+			netif_stacked_transfer_operstate(dev, vlandev);
 		}
 		break;
 
 	case NETDEV_UNREGISTER:
 		/* Delete all VLANs for this dev. */
+		grp->killall = 1;
+
 		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
 			vlandev = vlan_group_get_device(grp, i);
 			if (!vlandev)
@@ -538,8 +526,9 @@
 			if (grp->nr_vlans == 1)
 				i = VLAN_GROUP_ARRAY_LEN;
 
-			unregister_vlan_dev(vlandev);
+			unregister_vlan_dev(vlandev, &list);
 		}
+		unregister_netdevice_many(&list);
 		break;
 	}
 
@@ -645,7 +634,7 @@
 		err = -EPERM;
 		if (!capable(CAP_NET_ADMIN))
 			break;
-		unregister_vlan_dev(dev);
+		unregister_vlan_dev(dev, NULL);
 		err = 0;
 		break;
 
@@ -676,47 +665,26 @@
 
 static int vlan_init_net(struct net *net)
 {
+	struct vlan_net *vn = net_generic(net, vlan_net_id);
 	int err;
-	struct vlan_net *vn;
-
-	err = -ENOMEM;
-	vn = kzalloc(sizeof(struct vlan_net), GFP_KERNEL);
-	if (vn == NULL)
-		goto err_alloc;
-
-	err = net_assign_generic(net, vlan_net_id, vn);
-	if (err < 0)
-		goto err_assign;
 
 	vn->name_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD;
 
 	err = vlan_proc_init(net);
-	if (err < 0)
-		goto err_proc;
 
-	return 0;
-
-err_proc:
-	/* nothing */
-err_assign:
-	kfree(vn);
-err_alloc:
 	return err;
 }
 
 static void vlan_exit_net(struct net *net)
 {
-	struct vlan_net *vn;
-
-	vn = net_generic(net, vlan_net_id);
-	rtnl_kill_links(net, &vlan_link_ops);
 	vlan_proc_cleanup(net);
-	kfree(vn);
 }
 
 static struct pernet_operations vlan_net_ops = {
 	.init = vlan_init_net,
 	.exit = vlan_exit_net,
+	.id   = &vlan_net_id,
+	.size = sizeof(struct vlan_net),
 };
 
 static int __init vlan_proto_init(void)
@@ -726,7 +694,7 @@
 	pr_info("%s v%s %s\n", vlan_fullname, vlan_version, vlan_copyright);
 	pr_info("All bugs added by %s\n", vlan_buggyright);
 
-	err = register_pernet_gen_device(&vlan_net_id, &vlan_net_ops);
+	err = register_pernet_subsys(&vlan_net_ops);
 	if (err < 0)
 		goto err0;
 
@@ -751,7 +719,7 @@
 err3:
 	unregister_netdevice_notifier(&vlan_notifier_block);
 err2:
-	unregister_pernet_gen_device(vlan_net_id, &vlan_net_ops);
+	unregister_pernet_subsys(&vlan_net_ops);
 err0:
 	return err;
 }
@@ -771,7 +739,7 @@
 	for (i = 0; i < VLAN_GRP_HASH_SIZE; i++)
 		BUG_ON(!hlist_empty(&vlan_group_hash[i]));
 
-	unregister_pernet_gen_device(vlan_net_id, &vlan_net_ops);
+	unregister_pernet_subsys(&vlan_net_ops);
 	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 
 	vlan_gvrp_uninit();
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 82570bc..5685296 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -16,6 +16,21 @@
 	struct vlan_priority_tci_mapping	*next;
 };
 
+
+/**
+ *	struct vlan_rx_stats - VLAN percpu rx stats
+ *	@rx_packets: number of received packets
+ *	@rx_bytes: number of received bytes
+ *	@multicast: number of received multicast packets
+ *	@rx_errors: number of errors
+ */
+struct vlan_rx_stats {
+	unsigned long rx_packets;
+	unsigned long rx_bytes;
+	unsigned long multicast;
+	unsigned long rx_errors;
+};
+
 /**
  *	struct vlan_dev_info - VLAN private device data
  *	@nr_ingress_mappings: number of ingress priority mappings
@@ -29,6 +44,7 @@
  *	@dent: proc dir entry
  *	@cnt_inc_headroom_on_tx: statistic - number of skb expansions on TX
  *	@cnt_encap_on_xmit: statistic - number of skb encapsulations on TX
+ *	@vlan_rx_stats: ptr to percpu rx stats
  */
 struct vlan_dev_info {
 	unsigned int				nr_ingress_mappings;
@@ -45,6 +61,7 @@
 	struct proc_dir_entry			*dent;
 	unsigned long				cnt_inc_headroom_on_tx;
 	unsigned long				cnt_encap_on_xmit;
+	struct vlan_rx_stats			*vlan_rx_stats;
 };
 
 static inline struct vlan_dev_info *vlan_dev_info(const struct net_device *dev)
@@ -82,14 +99,14 @@
 int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id);
 void vlan_setup(struct net_device *dev);
 int register_vlan_dev(struct net_device *dev);
-void unregister_vlan_dev(struct net_device *dev);
+void unregister_vlan_dev(struct net_device *dev, struct list_head *head);
 
 static inline u32 vlan_get_ingress_priority(struct net_device *dev,
 					    u16 vlan_tci)
 {
 	struct vlan_dev_info *vip = vlan_dev_info(dev);
 
-	return vip->ingress_priority_map[(vlan_tci >> 13) & 0x7];
+	return vip->ingress_priority_map[(vlan_tci >> VLAN_PRIO_SHIFT) & 0x7];
 }
 
 #ifdef CONFIG_VLAN_8021Q_GVRP
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 7f7de1a..e75a2f3 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -14,7 +14,7 @@
 	if (skb_bond_should_drop(skb))
 		goto drop;
 
-	skb->vlan_tci = vlan_tci;
+	__vlan_hwaccel_put_tag(skb, vlan_tci);
 	skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK);
 
 	if (!skb->dev)
@@ -31,7 +31,7 @@
 int vlan_hwaccel_do_receive(struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
-	struct net_device_stats *stats;
+	struct vlan_rx_stats     *rx_stats;
 
 	skb->dev = vlan_dev_info(dev)->real_dev;
 	netif_nit_deliver(skb);
@@ -40,15 +40,17 @@
 	skb->priority = vlan_get_ingress_priority(dev, skb->vlan_tci);
 	skb->vlan_tci = 0;
 
-	stats = &dev->stats;
-	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
+	rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats,
+			       smp_processor_id());
+
+	rx_stats->rx_packets++;
+	rx_stats->rx_bytes += skb->len;
 
 	switch (skb->pkt_type) {
 	case PACKET_BROADCAST:
 		break;
 	case PACKET_MULTICAST:
-		stats->multicast++;
+		rx_stats->multicast++;
 		break;
 	case PACKET_OTHERHOST:
 		/* Our lower layer thinks this is not local, let's make sure.
@@ -74,15 +76,16 @@
 }
 EXPORT_SYMBOL(vlan_dev_vlan_id);
 
-static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
-			   unsigned int vlan_tci, struct sk_buff *skb)
+static gro_result_t
+vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
+		unsigned int vlan_tci, struct sk_buff *skb)
 {
 	struct sk_buff *p;
 
 	if (skb_bond_should_drop(skb))
 		goto drop;
 
-	skb->vlan_tci = vlan_tci;
+	__vlan_hwaccel_put_tag(skb, vlan_tci);
 	skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK);
 
 	if (!skb->dev)
@@ -101,11 +104,12 @@
 	return GRO_DROP;
 }
 
-int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
-		     unsigned int vlan_tci, struct sk_buff *skb)
+gro_result_t vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
+			      unsigned int vlan_tci, struct sk_buff *skb)
 {
 	if (netpoll_rx_on(skb))
-		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci);
+		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci)
+			? GRO_DROP : GRO_NORMAL;
 
 	skb_gro_reset_offset(skb);
 
@@ -113,17 +117,18 @@
 }
 EXPORT_SYMBOL(vlan_gro_receive);
 
-int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-		   unsigned int vlan_tci)
+gro_result_t vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
+			    unsigned int vlan_tci)
 {
 	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
-		return NET_RX_DROP;
+		return GRO_DROP;
 
 	if (netpoll_rx_on(skb)) {
 		skb->protocol = eth_type_trans(skb, skb->dev);
-		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci);
+		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci)
+			? GRO_DROP : GRO_NORMAL;
 	}
 
 	return napi_frags_finish(napi, skb,
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 4198ec5..b788978 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -140,7 +140,7 @@
 		  struct packet_type *ptype, struct net_device *orig_dev)
 {
 	struct vlan_hdr *vhdr;
-	struct net_device_stats *stats;
+	struct vlan_rx_stats *rx_stats;
 	u16 vlan_id;
 	u16 vlan_tci;
 
@@ -163,9 +163,10 @@
 		goto err_unlock;
 	}
 
-	stats = &skb->dev->stats;
-	stats->rx_packets++;
-	stats->rx_bytes += skb->len;
+	rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats,
+			       smp_processor_id());
+	rx_stats->rx_packets++;
+	rx_stats->rx_bytes += skb->len;
 
 	skb_pull_rcsum(skb, VLAN_HLEN);
 
@@ -180,7 +181,7 @@
 		break;
 
 	case PACKET_MULTICAST:
-		stats->multicast++;
+		rx_stats->multicast++;
 		break;
 
 	case PACKET_OTHERHOST:
@@ -200,7 +201,7 @@
 
 	skb = vlan_check_reorder_header(skb);
 	if (!skb) {
-		stats->rx_errors++;
+		rx_stats->rx_errors++;
 		goto err_unlock;
 	}
 
@@ -332,7 +333,7 @@
 	} else
 		txq->tx_dropped++;
 
-	return NETDEV_TX_OK;
+	return ret;
 }
 
 static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
@@ -358,7 +359,7 @@
 	} else
 		txq->tx_dropped++;
 
-	return NETDEV_TX_OK;
+	return ret;
 }
 
 static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
@@ -393,7 +394,7 @@
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	struct vlan_priority_tci_mapping *mp = NULL;
 	struct vlan_priority_tci_mapping *np;
-	u32 vlan_qos = (vlan_prio << 13) & 0xE000;
+	u32 vlan_qos = (vlan_prio << VLAN_PRIO_SHIFT) & VLAN_PRIO_MASK;
 
 	/* See if a priority mapping exists.. */
 	mp = vlan->egress_priority_map[skb_prio & 0xF];
@@ -430,7 +431,8 @@
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	u32 old_flags = vlan->flags;
 
-	if (mask & ~(VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP))
+	if (mask & ~(VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP |
+		     VLAN_FLAG_LOOSE_BINDING))
 		return -EINVAL;
 
 	vlan->flags = (old_flags & ~mask) | (flags & mask);
@@ -455,7 +457,8 @@
 	struct net_device *real_dev = vlan->real_dev;
 	int err;
 
-	if (!(real_dev->flags & IFF_UP))
+	if (!(real_dev->flags & IFF_UP) &&
+	    !(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
 		return -ENETDOWN;
 
 	if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) {
@@ -626,6 +629,17 @@
 		rc = ops->ndo_fcoe_disable(real_dev);
 	return rc;
 }
+
+static int vlan_dev_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type)
+{
+	struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+	const struct net_device_ops *ops = real_dev->netdev_ops;
+	int rc = -EINVAL;
+
+	if (ops->ndo_fcoe_get_wwn)
+		rc = ops->ndo_fcoe_get_wwn(real_dev, wwn, type);
+	return rc;
+}
 #endif
 
 static void vlan_dev_change_rx_flags(struct net_device *dev, int change)
@@ -720,6 +734,11 @@
 		subclass = 1;
 
 	vlan_dev_set_lockdep_class(dev, subclass);
+
+	vlan_dev_info(dev)->vlan_rx_stats = alloc_percpu(struct vlan_rx_stats);
+	if (!vlan_dev_info(dev)->vlan_rx_stats)
+		return -ENOMEM;
+
 	return 0;
 }
 
@@ -729,6 +748,8 @@
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	int i;
 
+	free_percpu(vlan->vlan_rx_stats);
+	vlan->vlan_rx_stats = NULL;
 	for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
 		while ((pm = vlan->egress_priority_map[i]) != NULL) {
 			vlan->egress_priority_map[i] = pm->next;
@@ -764,6 +785,31 @@
 	return dev_ethtool_get_flags(vlan->real_dev);
 }
 
+static struct net_device_stats *vlan_dev_get_stats(struct net_device *dev)
+{
+	struct net_device_stats *stats = &dev->stats;
+
+	dev_txq_stats_fold(dev, stats);
+
+	if (vlan_dev_info(dev)->vlan_rx_stats) {
+		struct vlan_rx_stats *p, rx = {0};
+		int i;
+
+		for_each_possible_cpu(i) {
+			p = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats, i);
+			rx.rx_packets += p->rx_packets;
+			rx.rx_bytes   += p->rx_bytes;
+			rx.rx_errors  += p->rx_errors;
+			rx.multicast  += p->multicast;
+		}
+		stats->rx_packets = rx.rx_packets;
+		stats->rx_bytes   = rx.rx_bytes;
+		stats->rx_errors  = rx.rx_errors;
+		stats->multicast  = rx.multicast;
+	}
+	return stats;
+}
+
 static const struct ethtool_ops vlan_ethtool_ops = {
 	.get_settings	        = vlan_ethtool_get_settings,
 	.get_drvinfo	        = vlan_ethtool_get_drvinfo,
@@ -786,11 +832,13 @@
 	.ndo_change_rx_flags	= vlan_dev_change_rx_flags,
 	.ndo_do_ioctl		= vlan_dev_ioctl,
 	.ndo_neigh_setup	= vlan_dev_neigh_setup,
+	.ndo_get_stats		= vlan_dev_get_stats,
 #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
 	.ndo_fcoe_ddp_setup	= vlan_dev_fcoe_ddp_setup,
 	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
 	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
 	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
+	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
 #endif
 };
 
@@ -808,11 +856,13 @@
 	.ndo_change_rx_flags	= vlan_dev_change_rx_flags,
 	.ndo_do_ioctl		= vlan_dev_ioctl,
 	.ndo_neigh_setup	= vlan_dev_neigh_setup,
+	.ndo_get_stats		= vlan_dev_get_stats,
 #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
 	.ndo_fcoe_ddp_setup	= vlan_dev_fcoe_ddp_setup,
 	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
 	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
 	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
+	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
 #endif
 };
 
diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c
index a915048..ddc1057 100644
--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -60,7 +60,8 @@
 	if (data[IFLA_VLAN_FLAGS]) {
 		flags = nla_data(data[IFLA_VLAN_FLAGS]);
 		if ((flags->flags & flags->mask) &
-		    ~(VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP))
+		    ~(VLAN_FLAG_REORDER_HDR | VLAN_FLAG_GVRP |
+		      VLAN_FLAG_LOOSE_BINDING))
 			return -EINVAL;
 	}
 
@@ -119,7 +120,7 @@
 	return 0;
 }
 
-static int vlan_newlink(struct net_device *dev,
+static int vlan_newlink(struct net *src_net, struct net_device *dev,
 			struct nlattr *tb[], struct nlattr *data[])
 {
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
@@ -131,7 +132,7 @@
 
 	if (!tb[IFLA_LINK])
 		return -EINVAL;
-	real_dev = __dev_get_by_index(dev_net(dev), nla_get_u32(tb[IFLA_LINK]));
+	real_dev = __dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
 	if (!real_dev)
 		return -ENODEV;
 
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 6262c33..9ec1f05 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -201,18 +201,17 @@
 
 /* start read of /proc/net/vlan/config */
 static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(rcu)
 {
 	struct net_device *dev;
 	struct net *net = seq_file_net(seq);
 	loff_t i = 1;
 
-	read_lock(&dev_base_lock);
-
+	rcu_read_lock();
 	if (*pos == 0)
 		return SEQ_START_TOKEN;
 
-	for_each_netdev(net, dev) {
+	for_each_netdev_rcu(net, dev) {
 		if (!is_vlan_dev(dev))
 			continue;
 
@@ -234,7 +233,7 @@
 	if (v == SEQ_START_TOKEN)
 		dev = net_device_entry(&net->dev_base_head);
 
-	for_each_netdev_continue(net, dev) {
+	for_each_netdev_continue_rcu(net, dev) {
 		if (!is_vlan_dev(dev))
 			continue;
 
@@ -245,9 +244,9 @@
 }
 
 static void vlan_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(rcu)
 {
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int vlan_seq_show(struct seq_file *seq, void *v)
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 8d934dd..4dd873e 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -633,8 +633,8 @@
 	if (n & POLLOUT) {
 		set_bit(Wpending, &m->wsched);
 		P9_DPRINTK(P9_DEBUG_TRANS, "mux %p can write\n", m);
-		if ((m->wsize || !list_empty(&m->unsent_req_list))
-		    && !test_and_set_bit(Wworksched, &m->wsched)) {
+		if ((m->wsize || !list_empty(&m->unsent_req_list)) &&
+		    !test_and_set_bit(Wworksched, &m->wsched)) {
 			P9_DPRINTK(P9_DEBUG_TRANS, "sched write work %p\n", m);
 			queue_work(p9_mux_wq, &m->wq);
 		}
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index b1a4290..9fc4da5 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -56,6 +56,7 @@
 #include <linux/if_arp.h>
 #include <linux/smp_lock.h>
 #include <linux/termios.h>	/* For TIOCOUTQ/INQ */
+#include <linux/compat.h>
 #include <net/datalink.h>
 #include <net/psnap.h>
 #include <net/sock.h>
@@ -922,13 +923,8 @@
 {
 	/* This ought to be unwrapped neatly. I'll trust gcc for now */
 	while (len--) {
-		sum += *data;
-		sum <<= 1;
-		if (sum & 0x10000) {
-			sum++;
-			sum &= 0xffff;
-		}
-		data++;
+		sum += *data++;
+		sum = rol16(sum, 1);
 	}
 	return sum;
 }
@@ -1021,12 +1017,13 @@
  * Create a socket. Initialise the socket, blank the addresses
  * set the state.
  */
-static int atalk_create(struct net *net, struct socket *sock, int protocol)
+static int atalk_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct sock *sk;
 	int rc = -ESOCKTNOSUPPORT;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	/*
@@ -1054,11 +1051,13 @@
 {
 	struct sock *sk = sock->sk;
 
+	lock_kernel();
 	if (sk) {
 		sock_orphan(sk);
 		sock->sk = NULL;
 		atalk_destroy_socket(sk);
 	}
+	unlock_kernel();
 	return 0;
 }
 
@@ -1134,6 +1133,7 @@
 	struct sockaddr_at *addr = (struct sockaddr_at *)uaddr;
 	struct sock *sk = sock->sk;
 	struct atalk_sock *at = at_sk(sk);
+	int err;
 
 	if (!sock_flag(sk, SOCK_ZAPPED) ||
 	    addr_len != sizeof(struct sockaddr_at))
@@ -1142,37 +1142,44 @@
 	if (addr->sat_family != AF_APPLETALK)
 		return -EAFNOSUPPORT;
 
+	lock_kernel();
 	if (addr->sat_addr.s_net == htons(ATADDR_ANYNET)) {
 		struct atalk_addr *ap = atalk_find_primary();
 
+		err = -EADDRNOTAVAIL;
 		if (!ap)
-			return -EADDRNOTAVAIL;
+			goto out;
 
 		at->src_net  = addr->sat_addr.s_net = ap->s_net;
 		at->src_node = addr->sat_addr.s_node= ap->s_node;
 	} else {
+		err = -EADDRNOTAVAIL;
 		if (!atalk_find_interface(addr->sat_addr.s_net,
 					  addr->sat_addr.s_node))
-			return -EADDRNOTAVAIL;
+			goto out;
 
 		at->src_net  = addr->sat_addr.s_net;
 		at->src_node = addr->sat_addr.s_node;
 	}
 
 	if (addr->sat_port == ATADDR_ANYPORT) {
-		int n = atalk_pick_and_bind_port(sk, addr);
+		err = atalk_pick_and_bind_port(sk, addr);
 
-		if (n < 0)
-			return n;
+		if (err < 0)
+			goto out;
 	} else {
 		at->src_port = addr->sat_port;
 
+		err = -EADDRINUSE;
 		if (atalk_find_or_insert_socket(sk, addr))
-			return -EADDRINUSE;
+			goto out;
 	}
 
 	sock_reset_flag(sk, SOCK_ZAPPED);
-	return 0;
+	err = 0;
+out:
+	unlock_kernel();
+	return err;
 }
 
 /* Set the address we talk to */
@@ -1182,6 +1189,7 @@
 	struct sock *sk = sock->sk;
 	struct atalk_sock *at = at_sk(sk);
 	struct sockaddr_at *addr;
+	int err;
 
 	sk->sk_state   = TCP_CLOSE;
 	sock->state = SS_UNCONNECTED;
@@ -1206,12 +1214,15 @@
 #endif
 	}
 
+	lock_kernel();
+	err = -EBUSY;
 	if (sock_flag(sk, SOCK_ZAPPED))
 		if (atalk_autobind(sk) < 0)
-			return -EBUSY;
+			goto out;
 
+	err = -ENETUNREACH;
 	if (!atrtr_get_dev(&addr->sat_addr))
-		return -ENETUNREACH;
+		goto out;
 
 	at->dest_port = addr->sat_port;
 	at->dest_net  = addr->sat_addr.s_net;
@@ -1219,7 +1230,10 @@
 
 	sock->state  = SS_CONNECTED;
 	sk->sk_state = TCP_ESTABLISHED;
-	return 0;
+	err = 0;
+out:
+	unlock_kernel();
+	return err;
 }
 
 /*
@@ -1232,17 +1246,21 @@
 	struct sockaddr_at sat;
 	struct sock *sk = sock->sk;
 	struct atalk_sock *at = at_sk(sk);
+	int err;
 
+	lock_kernel();
+	err = -ENOBUFS;
 	if (sock_flag(sk, SOCK_ZAPPED))
 		if (atalk_autobind(sk) < 0)
-			return -ENOBUFS;
+			goto out;
 
 	*uaddr_len = sizeof(struct sockaddr_at);
 	memset(&sat.sat_zero, 0, sizeof(sat.sat_zero));
 
 	if (peer) {
+		err = -ENOTCONN;
 		if (sk->sk_state != TCP_ESTABLISHED)
-			return -ENOTCONN;
+			goto out;
 
 		sat.sat_addr.s_net  = at->dest_net;
 		sat.sat_addr.s_node = at->dest_node;
@@ -1253,9 +1271,23 @@
 		sat.sat_port	    = at->src_port;
 	}
 
+	err = 0;
 	sat.sat_family = AF_APPLETALK;
 	memcpy(uaddr, &sat, sizeof(sat));
-	return 0;
+
+out:
+	unlock_kernel();
+	return err;
+}
+
+static unsigned int atalk_poll(struct file *file, struct socket *sock,
+			   poll_table *wait)
+{
+	int err;
+	lock_kernel();
+	err = datagram_poll(file, sock, wait);
+	unlock_kernel();
+	return err;
 }
 
 #if defined(CONFIG_IPDDP) || defined(CONFIG_IPDDP_MODULE)
@@ -1563,23 +1595,28 @@
 	if (len > DDP_MAXSZ)
 		return -EMSGSIZE;
 
+	lock_kernel();
 	if (usat) {
+		err = -EBUSY;
 		if (sock_flag(sk, SOCK_ZAPPED))
 			if (atalk_autobind(sk) < 0)
-				return -EBUSY;
+				goto out;
 
+		err = -EINVAL;
 		if (msg->msg_namelen < sizeof(*usat) ||
 		    usat->sat_family != AF_APPLETALK)
-			return -EINVAL;
+			goto out;
 
+		err = -EPERM;
 		/* netatalk didn't implement this check */
 		if (usat->sat_addr.s_node == ATADDR_BCAST &&
 		    !sock_flag(sk, SOCK_BROADCAST)) {
-			return -EPERM;
+			goto out;
 		}
 	} else {
+		err = -ENOTCONN;
 		if (sk->sk_state != TCP_ESTABLISHED)
-			return -ENOTCONN;
+			goto out;
 		usat = &local_satalk;
 		usat->sat_family      = AF_APPLETALK;
 		usat->sat_port	      = at->dest_port;
@@ -1603,8 +1640,9 @@
 
 		rt = atrtr_find(&at_hint);
 	}
+	err = ENETUNREACH;
 	if (!rt)
-		return -ENETUNREACH;
+		goto out;
 
 	dev = rt->dev;
 
@@ -1614,7 +1652,7 @@
 	size += dev->hard_header_len;
 	skb = sock_alloc_send_skb(sk, size, (flags & MSG_DONTWAIT), &err);
 	if (!skb)
-		return err;
+		goto out;
 
 	skb->sk = sk;
 	skb_reserve(skb, ddp_dl->header_length);
@@ -1637,7 +1675,8 @@
 	err = memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len);
 	if (err) {
 		kfree_skb(skb);
-		return -EFAULT;
+		err = -EFAULT;
+		goto out;
 	}
 
 	if (sk->sk_no_check == 1)
@@ -1676,7 +1715,8 @@
 			rt = atrtr_find(&at_lo);
 			if (!rt) {
 				kfree_skb(skb);
-				return -ENETUNREACH;
+				err = -ENETUNREACH;
+				goto out;
 			}
 			dev = rt->dev;
 			skb->dev = dev;
@@ -1696,7 +1736,9 @@
 	}
 	SOCK_DEBUG(sk, "SK %p: Done write (%Zd).\n", sk, len);
 
-	return len;
+out:
+	unlock_kernel();
+	return err ? : len;
 }
 
 static int atalk_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
@@ -1708,10 +1750,13 @@
 	int copied = 0;
 	int offset = 0;
 	int err = 0;
-	struct sk_buff *skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
+	struct sk_buff *skb;
+
+	lock_kernel();
+	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
 						flags & MSG_DONTWAIT, &err);
 	if (!skb)
-		return err;
+		goto out;
 
 	/* FIXME: use skb->cb to be able to use shared skbs */
 	ddp = ddp_hdr(skb);
@@ -1739,6 +1784,9 @@
 	}
 
 	skb_free_datagram(sk, skb);	/* Free the datagram. */
+
+out:
+	unlock_kernel();
 	return err ? : copied;
 }
 
@@ -1810,24 +1858,26 @@
 static int atalk_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 {
 	/*
-	 * All Appletalk ioctls except SIOCATALKDIFADDR are standard.  And
-	 * SIOCATALKDIFADDR is handled by upper layer as well, so there is
-	 * nothing to do.  Eventually SIOCATALKDIFADDR should be moved
-	 * here so there is no generic SIOCPROTOPRIVATE translation in the
-	 * system.
+	 * SIOCATALKDIFADDR is a SIOCPROTOPRIVATE ioctl number, so we
+	 * cannot handle it in common code. The data we access if ifreq
+	 * here is compatible, so we can simply call the native
+	 * handler.
 	 */
+	if (cmd == SIOCATALKDIFADDR)
+		return atalk_ioctl(sock, cmd, (unsigned long)compat_ptr(arg));
+
 	return -ENOIOCTLCMD;
 }
 #endif
 
 
-static struct net_proto_family atalk_family_ops = {
+static const struct net_proto_family atalk_family_ops = {
 	.family		= PF_APPLETALK,
 	.create		= atalk_create,
 	.owner		= THIS_MODULE,
 };
 
-static const struct proto_ops SOCKOPS_WRAPPED(atalk_dgram_ops) = {
+static const struct proto_ops atalk_dgram_ops = {
 	.family		= PF_APPLETALK,
 	.owner		= THIS_MODULE,
 	.release	= atalk_release,
@@ -1836,7 +1886,7 @@
 	.socketpair	= sock_no_socketpair,
 	.accept		= sock_no_accept,
 	.getname	= atalk_getname,
-	.poll		= datagram_poll,
+	.poll		= atalk_poll,
 	.ioctl		= atalk_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= atalk_compat_ioctl,
@@ -1851,8 +1901,6 @@
 	.sendpage	= sock_no_sendpage,
 };
 
-SOCKOPS_WRAP(atalk_dgram, PF_APPLETALK);
-
 static struct notifier_block ddp_notifier = {
 	.notifier_call	= ddp_device_event,
 };
diff --git a/net/appletalk/sysctl_net_atalk.c b/net/appletalk/sysctl_net_atalk.c
index 8d237b1..04e9c0d 100644
--- a/net/appletalk/sysctl_net_atalk.c
+++ b/net/appletalk/sysctl_net_atalk.c
@@ -12,25 +12,20 @@
 
 static struct ctl_table atalk_table[] = {
 	{
-		.ctl_name	= NET_ATALK_AARP_EXPIRY_TIME,
 		.procname	= "aarp-expiry-time",
 		.data		= &sysctl_aarp_expiry_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_ATALK_AARP_TICK_TIME,
 		.procname	= "aarp-tick-time",
 		.data		= &sysctl_aarp_tick_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_ATALK_AARP_RETRANSMIT_LIMIT,
 		.procname	= "aarp-retransmit-limit",
 		.data		= &sysctl_aarp_retransmit_limit,
 		.maxlen		= sizeof(int),
@@ -38,20 +33,18 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_ATALK_AARP_RESOLVE_TIME,
 		.procname	= "aarp-resolve-time",
 		.data		= &sysctl_aarp_resolve_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
-	{ 0 },
+	{ },
 };
 
 static struct ctl_path atalk_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "appletalk", .ctl_name = NET_ATALK, },
+	{ .procname = "net", },
+	{ .procname = "appletalk", },
 	{ }
 };
 
diff --git a/net/atm/common.c b/net/atm/common.c
index 950bd16..d61e051 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -496,7 +496,7 @@
 	error = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 	if (error)
 		return error;
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 	pr_debug("RcvM %d -= %d\n", atomic_read(&sk->sk_rmem_alloc), skb->truesize);
 	atm_return(vcc, skb->truesize);
 	skb_free_datagram(sk, skb);
diff --git a/net/atm/ioctl.c b/net/atm/ioctl.c
index 4da8892..2ea4099 100644
--- a/net/atm/ioctl.c
+++ b/net/atm/ioctl.c
@@ -191,8 +191,181 @@
 }
 
 #ifdef CONFIG_COMPAT
-int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+/*
+ * FIXME:
+ * The compat_ioctl handling is duplicated, using both these conversion
+ * routines and the compat argument to the actual handlers. Both
+ * versions are somewhat incomplete and should be merged, e.g. by
+ * moving the ioctl number translation into the actual handlers and
+ * killing the conversion code.
+ *
+ * -arnd, November 2009
+ */
+#define ATM_GETLINKRATE32 _IOW('a', ATMIOC_ITF+1, struct compat_atmif_sioc)
+#define ATM_GETNAMES32    _IOW('a', ATMIOC_ITF+3, struct compat_atm_iobuf)
+#define ATM_GETTYPE32     _IOW('a', ATMIOC_ITF+4, struct compat_atmif_sioc)
+#define ATM_GETESI32	  _IOW('a', ATMIOC_ITF+5, struct compat_atmif_sioc)
+#define ATM_GETADDR32	  _IOW('a', ATMIOC_ITF+6, struct compat_atmif_sioc)
+#define ATM_RSTADDR32	  _IOW('a', ATMIOC_ITF+7, struct compat_atmif_sioc)
+#define ATM_ADDADDR32	  _IOW('a', ATMIOC_ITF+8, struct compat_atmif_sioc)
+#define ATM_DELADDR32	  _IOW('a', ATMIOC_ITF+9, struct compat_atmif_sioc)
+#define ATM_GETCIRANGE32  _IOW('a', ATMIOC_ITF+10, struct compat_atmif_sioc)
+#define ATM_SETCIRANGE32  _IOW('a', ATMIOC_ITF+11, struct compat_atmif_sioc)
+#define ATM_SETESI32      _IOW('a', ATMIOC_ITF+12, struct compat_atmif_sioc)
+#define ATM_SETESIF32     _IOW('a', ATMIOC_ITF+13, struct compat_atmif_sioc)
+#define ATM_GETSTAT32     _IOW('a', ATMIOC_SARCOM+0, struct compat_atmif_sioc)
+#define ATM_GETSTATZ32    _IOW('a', ATMIOC_SARCOM+1, struct compat_atmif_sioc)
+#define ATM_GETLOOP32	  _IOW('a', ATMIOC_SARCOM+2, struct compat_atmif_sioc)
+#define ATM_SETLOOP32	  _IOW('a', ATMIOC_SARCOM+3, struct compat_atmif_sioc)
+#define ATM_QUERYLOOP32	  _IOW('a', ATMIOC_SARCOM+4, struct compat_atmif_sioc)
+
+static struct {
+	unsigned int cmd32;
+	unsigned int cmd;
+} atm_ioctl_map[] = {
+	{ ATM_GETLINKRATE32, ATM_GETLINKRATE },
+	{ ATM_GETNAMES32,    ATM_GETNAMES },
+	{ ATM_GETTYPE32,     ATM_GETTYPE },
+	{ ATM_GETESI32,	     ATM_GETESI },
+	{ ATM_GETADDR32,     ATM_GETADDR },
+	{ ATM_RSTADDR32,     ATM_RSTADDR },
+	{ ATM_ADDADDR32,     ATM_ADDADDR },
+	{ ATM_DELADDR32,     ATM_DELADDR },
+	{ ATM_GETCIRANGE32,  ATM_GETCIRANGE },
+	{ ATM_SETCIRANGE32,  ATM_SETCIRANGE },
+	{ ATM_SETESI32,	     ATM_SETESI },
+	{ ATM_SETESIF32,     ATM_SETESIF },
+	{ ATM_GETSTAT32,     ATM_GETSTAT },
+	{ ATM_GETSTATZ32,    ATM_GETSTATZ },
+	{ ATM_GETLOOP32,     ATM_GETLOOP },
+	{ ATM_SETLOOP32,     ATM_SETLOOP },
+	{ ATM_QUERYLOOP32,   ATM_QUERYLOOP },
+};
+
+#define NR_ATM_IOCTL ARRAY_SIZE(atm_ioctl_map)
+
+static int do_atm_iobuf(struct socket *sock, unsigned int cmd,
+			unsigned long arg)
 {
-	return do_vcc_ioctl(sock, cmd, arg, 1);
+	struct atm_iobuf __user *iobuf;
+	struct compat_atm_iobuf __user *iobuf32;
+	u32 data;
+	void __user *datap;
+	int len, err;
+
+	iobuf = compat_alloc_user_space(sizeof(*iobuf));
+	iobuf32 = compat_ptr(arg);
+
+	if (get_user(len, &iobuf32->length) ||
+	    get_user(data, &iobuf32->buffer))
+		return -EFAULT;
+	datap = compat_ptr(data);
+	if (put_user(len, &iobuf->length) ||
+	    put_user(datap, &iobuf->buffer))
+		return -EFAULT;
+
+	err = do_vcc_ioctl(sock, cmd, (unsigned long) iobuf, 0);
+
+	if (!err) {
+		if (copy_in_user(&iobuf32->length, &iobuf->length,
+				 sizeof(int)))
+			err = -EFAULT;
+	}
+
+	return err;
+}
+
+static int do_atmif_sioc(struct socket *sock, unsigned int cmd,
+			 unsigned long arg)
+{
+	struct atmif_sioc __user *sioc;
+	struct compat_atmif_sioc __user *sioc32;
+	u32 data;
+	void __user *datap;
+	int err;
+
+	sioc = compat_alloc_user_space(sizeof(*sioc));
+	sioc32 = compat_ptr(arg);
+
+	if (copy_in_user(&sioc->number, &sioc32->number, 2 * sizeof(int))
+	    || get_user(data, &sioc32->arg))
+		return -EFAULT;
+	datap = compat_ptr(data);
+	if (put_user(datap, &sioc->arg))
+		return -EFAULT;
+
+	err = do_vcc_ioctl(sock, cmd, (unsigned long) sioc, 0);
+
+	if (!err) {
+		if (copy_in_user(&sioc32->length, &sioc->length,
+				 sizeof(int)))
+			err = -EFAULT;
+	}
+	return err;
+}
+
+static int do_atm_ioctl(struct socket *sock, unsigned int cmd32,
+			unsigned long arg)
+{
+	int i;
+	unsigned int cmd = 0;
+
+	switch (cmd32) {
+	case SONET_GETSTAT:
+	case SONET_GETSTATZ:
+	case SONET_GETDIAG:
+	case SONET_SETDIAG:
+	case SONET_CLRDIAG:
+	case SONET_SETFRAMING:
+	case SONET_GETFRAMING:
+	case SONET_GETFRSENSE:
+		return do_atmif_sioc(sock, cmd32, arg);
+	}
+
+	for (i = 0; i < NR_ATM_IOCTL; i++) {
+		if (cmd32 == atm_ioctl_map[i].cmd32) {
+			cmd = atm_ioctl_map[i].cmd;
+			break;
+		}
+	}
+	if (i == NR_ATM_IOCTL)
+		return -EINVAL;
+
+	switch (cmd) {
+	case ATM_GETNAMES:
+		return do_atm_iobuf(sock, cmd, arg);
+
+	case ATM_GETLINKRATE:
+	case ATM_GETTYPE:
+	case ATM_GETESI:
+	case ATM_GETADDR:
+	case ATM_RSTADDR:
+	case ATM_ADDADDR:
+	case ATM_DELADDR:
+	case ATM_GETCIRANGE:
+	case ATM_SETCIRANGE:
+	case ATM_SETESI:
+	case ATM_SETESIF:
+	case ATM_GETSTAT:
+	case ATM_GETSTATZ:
+	case ATM_GETLOOP:
+	case ATM_SETLOOP:
+	case ATM_QUERYLOOP:
+		return do_atmif_sioc(sock, cmd, arg);
+	}
+
+	return -EINVAL;
+}
+
+int vcc_compat_ioctl(struct socket *sock, unsigned int cmd,
+		     unsigned long arg)
+{
+	int ret;
+
+	ret = do_vcc_ioctl(sock, cmd, arg, 1);
+	if (ret != -ENOIOCTLCMD)
+		return ret;
+
+	return do_atm_ioctl(sock, cmd, arg);
 }
 #endif
diff --git a/net/atm/pvc.c b/net/atm/pvc.c
index d4c0245..8d74e62 100644
--- a/net/atm/pvc.c
+++ b/net/atm/pvc.c
@@ -127,7 +127,8 @@
 };
 
 
-static int pvc_create(struct net *net, struct socket *sock,int protocol)
+static int pvc_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	if (net != &init_net)
 		return -EAFNOSUPPORT;
@@ -137,7 +138,7 @@
 }
 
 
-static struct net_proto_family pvc_family_ops = {
+static const struct net_proto_family pvc_family_ops = {
 	.family = PF_ATMPVC,
 	.create = pvc_create,
 	.owner = THIS_MODULE,
diff --git a/net/atm/svc.c b/net/atm/svc.c
index f90d143..66e1d9b 100644
--- a/net/atm/svc.c
+++ b/net/atm/svc.c
@@ -25,7 +25,7 @@
 #include "signaling.h"
 #include "addr.h"
 
-static int svc_create(struct net *net, struct socket *sock,int protocol);
+static int svc_create(struct net *net, struct socket *sock, int protocol, int kern);
 
 /*
  * Note: since all this is still nicely synchronized with the signaling demon,
@@ -330,7 +330,7 @@
 
 	lock_sock(sk);
 
-	error = svc_create(sock_net(sk), newsock,0);
+	error = svc_create(sock_net(sk), newsock, 0, 0);
 	if (error)
 		goto out;
 
@@ -650,11 +650,12 @@
 };
 
 
-static int svc_create(struct net *net, struct socket *sock,int protocol)
+static int svc_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	int error;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	sock->ops = &svc_proto_ops;
@@ -666,7 +667,7 @@
 }
 
 
-static struct net_proto_family svc_family_ops = {
+static const struct net_proto_family svc_family_ops = {
 	.family = PF_ATMSVC,
 	.create = svc_create,
 	.owner = THIS_MODULE,
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index f454607..5588ba6 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -369,6 +369,9 @@
 	if (ax25_ctl.digi_count > AX25_MAX_DIGIS)
 		return -EINVAL;
 
+	if (ax25_ctl.arg > ULONG_MAX / HZ && ax25_ctl.cmd != AX25_KILL)
+		return -EINVAL;
+
 	digi.ndigi = ax25_ctl.digi_count;
 	for (k = 0; k < digi.ndigi; k++)
 		digi.calls[k] = ax25_ctl.digi_addr[k];
@@ -418,14 +421,10 @@
 		break;
 
 	case AX25_T3:
-		if (ax25_ctl.arg < 0)
-			goto einval_put;
 		ax25->t3 = ax25_ctl.arg * HZ;
 		break;
 
 	case AX25_IDLE:
-		if (ax25_ctl.arg < 0)
-			goto einval_put;
 		ax25->idle = ax25_ctl.arg * 60 * HZ;
 		break;
 
@@ -800,12 +799,13 @@
 	.obj_size = sizeof(struct sock),
 };
 
-static int ax25_create(struct net *net, struct socket *sock, int protocol)
+static int ax25_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	ax25_cb *ax25;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	switch (sock->type) {
@@ -1961,7 +1961,7 @@
 
 #endif
 
-static struct net_proto_family ax25_family_ops = {
+static const struct net_proto_family ax25_family_ops = {
 	.family =	PF_AX25,
 	.create =	ax25_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index 62ee3fb..5159be6 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -34,156 +34,128 @@
 static int ax25_table_size;
 
 static struct ctl_path ax25_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ax25", .ctl_name = NET_AX25, },
+	{ .procname = "net", },
+	{ .procname = "ax25", },
 	{ }
 };
 
 static const ctl_table ax25_param_table[] = {
 	{
-		.ctl_name	= NET_AX25_IP_DEFAULT_MODE,
 		.procname	= "ip_default_mode",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_ipdefmode,
 		.extra2		= &max_ipdefmode
 	},
 	{
-		.ctl_name	= NET_AX25_DEFAULT_MODE,
 		.procname	= "ax25_default_mode",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_axdefmode,
 		.extra2		= &max_axdefmode
 	},
 	{
-		.ctl_name	= NET_AX25_BACKOFF_TYPE,
 		.procname	= "backoff_type",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_backoff,
 		.extra2		= &max_backoff
 	},
 	{
-		.ctl_name	= NET_AX25_CONNECT_MODE,
 		.procname	= "connect_mode",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_conmode,
 		.extra2		= &max_conmode
 	},
 	{
-		.ctl_name	= NET_AX25_STANDARD_WINDOW,
 		.procname	= "standard_window_size",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_window,
 		.extra2		= &max_window
 	},
 	{
-		.ctl_name	= NET_AX25_EXTENDED_WINDOW,
 		.procname	= "extended_window_size",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_ewindow,
 		.extra2		= &max_ewindow
 	},
 	{
-		.ctl_name	= NET_AX25_T1_TIMEOUT,
 		.procname	= "t1_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_t1,
 		.extra2		= &max_t1
 	},
 	{
-		.ctl_name	= NET_AX25_T2_TIMEOUT,
 		.procname	= "t2_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_t2,
 		.extra2		= &max_t2
 	},
 	{
-		.ctl_name	= NET_AX25_T3_TIMEOUT,
 		.procname	= "t3_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_t3,
 		.extra2		= &max_t3
 	},
 	{
-		.ctl_name	= NET_AX25_IDLE_TIMEOUT,
 		.procname	= "idle_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_idle,
 		.extra2		= &max_idle
 	},
 	{
-		.ctl_name	= NET_AX25_N2,
 		.procname	= "maximum_retry_count",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_n2,
 		.extra2		= &max_n2
 	},
 	{
-		.ctl_name	= NET_AX25_PACLEN,
 		.procname	= "maximum_packet_length",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_paclen,
 		.extra2		= &max_paclen
 	},
 	{
-		.ctl_name	= NET_AX25_PROTOCOL,
 		.procname	= "protocol",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_proto,
 		.extra2		= &max_proto
 	},
 #ifdef CONFIG_AX25_DAMA_SLAVE
 	{
-		.ctl_name	= NET_AX25_DAMA_SLAVE_TIMEOUT,
 		.procname	= "dama_slave_timeout",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_ds_timeout,
 		.extra2		= &max_ds_timeout
 	},
 #endif
 
-	{ .ctl_name = 0 }	/* that's all, folks! */
+	{ }	/* that's all, folks! */
 };
 
 void ax25_register_sysctl(void)
@@ -212,11 +184,9 @@
 			return;
 		}
 		ax25_table[n].child = ax25_dev->systable = child;
-		ax25_table[n].ctl_name     = n + 1;
 		ax25_table[n].procname     = ax25_dev->dev->name;
 		ax25_table[n].mode         = 0555;
 
-		child[AX25_MAX_VALUES].ctl_name = 0;	/* just in case... */
 
 		for (k = 0; k < AX25_MAX_VALUES; k++)
 			child[k].data = &ax25_dev->values[k];
@@ -233,7 +203,7 @@
 	ctl_table *p;
 	unregister_sysctl_table(ax25_table_header);
 
-	for (p = ax25_table; p->ctl_name; p++)
+	for (p = ax25_table; p->procname; p++)
 		kfree(p->child);
 	kfree(ax25_table);
 }
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 8cfb5a8..087cc51 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -45,7 +45,7 @@
 
 /* Bluetooth sockets */
 #define BT_MAX_PROTO	8
-static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+static const struct net_proto_family *bt_proto[BT_MAX_PROTO];
 static DEFINE_RWLOCK(bt_proto_lock);
 
 static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
@@ -86,7 +86,7 @@
 				bt_key_strings[proto], &bt_lock_key[proto]);
 }
 
-int bt_sock_register(int proto, struct net_proto_family *ops)
+int bt_sock_register(int proto, const struct net_proto_family *ops)
 {
 	int err = 0;
 
@@ -126,7 +126,8 @@
 }
 EXPORT_SYMBOL(bt_sock_unregister);
 
-static int bt_sock_create(struct net *net, struct socket *sock, int proto)
+static int bt_sock_create(struct net *net, struct socket *sock, int proto,
+			  int kern)
 {
 	int err;
 
@@ -144,7 +145,7 @@
 	read_lock(&bt_proto_lock);
 
 	if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
-		err = bt_proto[proto]->create(net, sock, proto);
+		err = bt_proto[proto]->create(net, sock, proto, kern);
 		bt_sock_reclassify_lock(sock, proto);
 		module_put(bt_proto[proto]->owner);
 	}
@@ -257,7 +258,7 @@
 	skb_reset_transport_header(skb);
 	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 	if (err == 0)
-		sock_recv_timestamp(msg, sk, skb);
+		sock_recv_ts_and_drops(msg, sk, skb);
 
 	skb_free_datagram(sk, skb);
 
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index cafe9f5..29b1b22 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -230,7 +230,6 @@
 
 	switch (cmd) {
 	case BNEP_CMD_NOT_UNDERSTOOD:
-	case BNEP_SETUP_CONN_REQ:
 	case BNEP_SETUP_CONN_RSP:
 	case BNEP_FILTER_NET_TYPE_RSP:
 	case BNEP_FILTER_MULTI_ADDR_RSP:
@@ -245,6 +244,10 @@
 		err = bnep_ctrl_set_mcfilter(s, data, len);
 		break;
 
+	case BNEP_SETUP_CONN_REQ:
+		err = bnep_send_rsp(s, BNEP_SETUP_CONN_RSP, BNEP_CONN_NOT_ALLOWED);
+		break;
+
 	default: {
 			u8 pkt[3];
 			pkt[0] = BNEP_CONTROL;
diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c
index e857628..2ff6ac7 100644
--- a/net/bluetooth/bnep/sock.c
+++ b/net/bluetooth/bnep/sock.c
@@ -195,7 +195,8 @@
 	.obj_size	= sizeof(struct bt_sock)
 };
 
-static int bnep_sock_create(struct net *net, struct socket *sock, int protocol)
+static int bnep_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -222,7 +223,7 @@
 	return 0;
 }
 
-static struct net_proto_family bnep_sock_family_ops = {
+static const struct net_proto_family bnep_sock_family_ops = {
 	.family = PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create = bnep_sock_create
diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c
index 16b0fad..978cc3a 100644
--- a/net/bluetooth/cmtp/sock.c
+++ b/net/bluetooth/cmtp/sock.c
@@ -190,7 +190,8 @@
 	.obj_size	= sizeof(struct bt_sock)
 };
 
-static int cmtp_sock_create(struct net *net, struct socket *sock, int protocol)
+static int cmtp_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -217,7 +218,7 @@
 	return 0;
 }
 
-static struct net_proto_family cmtp_sock_family_ops = {
+static const struct net_proto_family cmtp_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= cmtp_sock_create
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index e1da8f6..94ba349 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -193,8 +193,9 @@
 	while ((skb = skb_dequeue(&hdev->driver_init))) {
 		bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
 		skb->dev = (void *) hdev;
+
 		skb_queue_tail(&hdev->cmd_q, skb);
-		hci_sched_cmd(hdev);
+		tasklet_schedule(&hdev->cmd_task);
 	}
 	skb_queue_purge(&hdev->driver_init);
 
@@ -987,6 +988,30 @@
 }
 EXPORT_SYMBOL(hci_resume_dev);
 
+/* Receive frame from HCI drivers */
+int hci_recv_frame(struct sk_buff *skb)
+{
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+	if (!hdev || (!test_bit(HCI_UP, &hdev->flags)
+				&& !test_bit(HCI_INIT, &hdev->flags))) {
+		kfree_skb(skb);
+		return -ENXIO;
+	}
+
+	/* Incomming skb */
+	bt_cb(skb)->incoming = 1;
+
+	/* Time stamp */
+	__net_timestamp(skb);
+
+	/* Queue frame for rx task */
+	skb_queue_tail(&hdev->rx_q, skb);
+	tasklet_schedule(&hdev->rx_task);
+
+	return 0;
+}
+EXPORT_SYMBOL(hci_recv_frame);
+
 /* Receive packet type fragment */
 #define __reassembly(hdev, type)  ((hdev)->reassembly[(type) - 2])
 
@@ -1193,8 +1218,9 @@
 
 	bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
 	skb->dev = (void *) hdev;
+
 	skb_queue_tail(&hdev->cmd_q, skb);
-	hci_sched_cmd(hdev);
+	tasklet_schedule(&hdev->cmd_task);
 
 	return 0;
 }
@@ -1271,7 +1297,8 @@
 		spin_unlock_bh(&conn->data_q.lock);
 	}
 
-	hci_sched_tx(hdev);
+	tasklet_schedule(&hdev->tx_task);
+
 	return 0;
 }
 EXPORT_SYMBOL(hci_send_acl);
@@ -1298,8 +1325,10 @@
 
 	skb->dev = (void *) hdev;
 	bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
+
 	skb_queue_tail(&conn->data_q, skb);
-	hci_sched_tx(hdev);
+	tasklet_schedule(&hdev->tx_task);
+
 	return 0;
 }
 EXPORT_SYMBOL(hci_send_sco);
@@ -1612,7 +1641,7 @@
 			hdev->cmd_last_tx = jiffies;
 		} else {
 			skb_queue_head(&hdev->cmd_q, skb);
-			hci_sched_cmd(hdev);
+			tasklet_schedule(&hdev->cmd_task);
 		}
 	}
 }
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index e99fe38..28517ba 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1320,7 +1320,7 @@
 	if (ev->ncmd) {
 		atomic_set(&hdev->cmd_cnt, 1);
 		if (!skb_queue_empty(&hdev->cmd_q))
-			hci_sched_cmd(hdev);
+			tasklet_schedule(&hdev->cmd_task);
 	}
 }
 
@@ -1386,7 +1386,7 @@
 	if (ev->ncmd) {
 		atomic_set(&hdev->cmd_cnt, 1);
 		if (!skb_queue_empty(&hdev->cmd_q))
-			hci_sched_cmd(hdev);
+			tasklet_schedule(&hdev->cmd_task);
 	}
 }
 
@@ -1454,7 +1454,7 @@
 		}
 	}
 
-	hci_sched_tx(hdev);
+	tasklet_schedule(&hdev->tx_task);
 
 	tasklet_enable(&hdev->tx_task);
 }
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 75302a9..688cfeb 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -414,6 +414,11 @@
 		goto done;
 	}
 
+	if (!test_bit(HCI_UP, &hdev->flags)) {
+		err = -ENETDOWN;
+		goto done;
+	}
+
 	if (!(skb = bt_skb_send_alloc(sk, len, msg->msg_flags & MSG_DONTWAIT, &err)))
 		goto done;
 
@@ -440,10 +445,10 @@
 
 		if (test_bit(HCI_RAW, &hdev->flags) || (ogf == 0x3f)) {
 			skb_queue_tail(&hdev->raw_q, skb);
-			hci_sched_tx(hdev);
+			tasklet_schedule(&hdev->tx_task);
 		} else {
 			skb_queue_tail(&hdev->cmd_q, skb);
-			hci_sched_cmd(hdev);
+			tasklet_schedule(&hdev->cmd_task);
 		}
 	} else {
 		if (!capable(CAP_NET_RAW)) {
@@ -452,7 +457,7 @@
 		}
 
 		skb_queue_tail(&hdev->raw_q, skb);
-		hci_sched_tx(hdev);
+		tasklet_schedule(&hdev->tx_task);
 	}
 
 	err = len;
@@ -621,7 +626,8 @@
 	.obj_size	= sizeof(struct hci_pinfo)
 };
 
-static int hci_sock_create(struct net *net, struct socket *sock, int protocol)
+static int hci_sock_create(struct net *net, struct socket *sock, int protocol,
+			   int kern)
 {
 	struct sock *sk;
 
@@ -687,7 +693,7 @@
 	return NOTIFY_DONE;
 }
 
-static struct net_proto_family hci_sock_family_ops = {
+static const struct net_proto_family hci_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= hci_sock_create,
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 49d8495..5697500 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -280,6 +280,13 @@
 	return hidp_queue_report(session, buf, rsize);
 }
 
+static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
+{
+	if (hidp_queue_report(hid->driver_data, data, count))
+		return -ENOMEM;
+	return count;
+}
+
 static void hidp_idle_timeout(unsigned long arg)
 {
 	struct hidp_session *session = (struct hidp_session *) arg;
@@ -785,6 +792,8 @@
 	hid->dev.parent = hidp_get_device(session);
 	hid->ll_driver = &hidp_hid_driver;
 
+	hid->hid_output_raw_report = hidp_output_raw_report;
+
 	err = hid_add_device(hid);
 	if (err < 0)
 		goto failed;
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 37c9d7d..9cfef68 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -241,7 +241,8 @@
 	.obj_size	= sizeof(struct bt_sock)
 };
 
-static int hidp_sock_create(struct net *net, struct socket *sock, int protocol)
+static int hidp_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -268,7 +269,7 @@
 	return 0;
 }
 
-static struct net_proto_family hidp_sock_family_ops = {
+static const struct net_proto_family hidp_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= hidp_sock_create
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 947f8bb..5129b88 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -54,6 +54,7 @@
 #define VERSION "2.14"
 
 static int enable_ertm = 0;
+static int max_transmit = L2CAP_DEFAULT_MAX_TX;
 
 static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
 static u8 l2cap_fixed_chan[8] = { 0x02, };
@@ -373,6 +374,8 @@
 	else
 		control |= L2CAP_SUPER_RCV_READY;
 
+	control |= pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT;
+
 	return l2cap_send_sframe(pi, control);
 }
 
@@ -819,7 +822,8 @@
 	return sk;
 }
 
-static int l2cap_sock_create(struct net *net, struct socket *sock, int protocol)
+static int l2cap_sock_create(struct net *net, struct socket *sock, int protocol,
+			     int kern)
 {
 	struct sock *sk;
 
@@ -831,7 +835,7 @@
 			sock->type != SOCK_DGRAM && sock->type != SOCK_RAW)
 		return -ESOCKTNOSUPPORT;
 
-	if (sock->type == SOCK_RAW && !capable(CAP_NET_RAW))
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
 		return -EPERM;
 
 	sock->ops = &l2cap_sock_ops;
@@ -1332,7 +1336,7 @@
 		tx_skb = skb_clone(skb, GFP_ATOMIC);
 		bt_cb(skb)->retries++;
 		control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
-		control |= (pi->req_seq << L2CAP_CTRL_REQSEQ_SHIFT)
+		control |= (pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT)
 				| (tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
 		put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
 
@@ -1361,8 +1365,8 @@
 	if (pi->conn_state & L2CAP_CONN_WAIT_F)
 		return 0;
 
-	while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk))
-			&& !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) {
+	while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) &&
+	       !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) {
 		tx_skb = skb_clone(skb, GFP_ATOMIC);
 
 		if (pi->remote_max_tx &&
@@ -1374,7 +1378,7 @@
 		bt_cb(skb)->retries++;
 
 		control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
-		control |= (pi->req_seq << L2CAP_CTRL_REQSEQ_SHIFT)
+		control |= (pi->buffer_seq << L2CAP_CTRL_REQSEQ_SHIFT)
 				| (pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT);
 		put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE);
 
@@ -1603,8 +1607,8 @@
 		return -EOPNOTSUPP;
 
 	/* Check outgoing MTU */
-	if (sk->sk_type == SOCK_SEQPACKET && pi->mode == L2CAP_MODE_BASIC
-			&& len > pi->omtu)
+	if (sk->sk_type == SOCK_SEQPACKET && pi->mode == L2CAP_MODE_BASIC &&
+	    len > pi->omtu)
 		return -EINVAL;
 
 	lock_sock(sk);
@@ -2172,6 +2176,21 @@
 	*ptr += L2CAP_CONF_OPT_SIZE + len;
 }
 
+static inline void l2cap_ertm_init(struct sock *sk)
+{
+	l2cap_pi(sk)->expected_ack_seq = 0;
+	l2cap_pi(sk)->unacked_frames = 0;
+	l2cap_pi(sk)->buffer_seq = 0;
+	l2cap_pi(sk)->num_to_ack = 0;
+
+	setup_timer(&l2cap_pi(sk)->retrans_timer,
+			l2cap_retrans_timeout, (unsigned long) sk);
+	setup_timer(&l2cap_pi(sk)->monitor_timer,
+			l2cap_monitor_timeout, (unsigned long) sk);
+
+	__skb_queue_head_init(SREJ_QUEUE(sk));
+}
+
 static int l2cap_mode_supported(__u8 mode, __u32 feat_mask)
 {
 	u32 local_feat_mask = l2cap_feat_mask;
@@ -2235,7 +2254,7 @@
 	case L2CAP_MODE_ERTM:
 		rfc.mode            = L2CAP_MODE_ERTM;
 		rfc.txwin_size      = L2CAP_DEFAULT_TX_WINDOW;
-		rfc.max_transmit    = L2CAP_DEFAULT_MAX_TX;
+		rfc.max_transmit    = max_transmit;
 		rfc.retrans_timeout = 0;
 		rfc.monitor_timeout = 0;
 		rfc.max_pdu_size    = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
@@ -2755,22 +2774,18 @@
 		goto unlock;
 
 	if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) {
-		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV)
-				|| l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
+		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
+		    l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
 			l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
 
 		sk->sk_state = BT_CONNECTED;
+
 		l2cap_pi(sk)->next_tx_seq = 0;
-		l2cap_pi(sk)->expected_ack_seq = 0;
-		l2cap_pi(sk)->unacked_frames = 0;
-
-		setup_timer(&l2cap_pi(sk)->retrans_timer,
-				l2cap_retrans_timeout, (unsigned long) sk);
-		setup_timer(&l2cap_pi(sk)->monitor_timer,
-				l2cap_monitor_timeout, (unsigned long) sk);
-
+		l2cap_pi(sk)->expected_tx_seq = 0;
 		__skb_queue_head_init(TX_QUEUE(sk));
-		__skb_queue_head_init(SREJ_QUEUE(sk));
+		if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM)
+			l2cap_ertm_init(sk);
+
 		l2cap_chan_ready(sk);
 		goto unlock;
 	}
@@ -2844,16 +2859,17 @@
 	l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE;
 
 	if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) {
-		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV)
-				|| l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
+		if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) ||
+		    l2cap_pi(sk)->fcs != L2CAP_FCS_NONE)
 			l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16;
 
 		sk->sk_state = BT_CONNECTED;
+		l2cap_pi(sk)->next_tx_seq = 0;
 		l2cap_pi(sk)->expected_tx_seq = 0;
-		l2cap_pi(sk)->buffer_seq = 0;
-		l2cap_pi(sk)->num_to_ack = 0;
 		__skb_queue_head_init(TX_QUEUE(sk));
-		__skb_queue_head_init(SREJ_QUEUE(sk));
+		if (l2cap_pi(sk)->mode ==  L2CAP_MODE_ERTM)
+			l2cap_ertm_init(sk);
+
 		l2cap_chan_ready(sk);
 	}
 
@@ -2885,9 +2901,12 @@
 	sk->sk_shutdown = SHUTDOWN_MASK;
 
 	skb_queue_purge(TX_QUEUE(sk));
-	skb_queue_purge(SREJ_QUEUE(sk));
-	del_timer(&l2cap_pi(sk)->retrans_timer);
-	del_timer(&l2cap_pi(sk)->monitor_timer);
+
+	if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM) {
+		skb_queue_purge(SREJ_QUEUE(sk));
+		del_timer(&l2cap_pi(sk)->retrans_timer);
+		del_timer(&l2cap_pi(sk)->monitor_timer);
+	}
 
 	l2cap_chan_del(sk, ECONNRESET);
 	bh_unlock_sock(sk);
@@ -2912,9 +2931,12 @@
 		return 0;
 
 	skb_queue_purge(TX_QUEUE(sk));
-	skb_queue_purge(SREJ_QUEUE(sk));
-	del_timer(&l2cap_pi(sk)->retrans_timer);
-	del_timer(&l2cap_pi(sk)->monitor_timer);
+
+	if (l2cap_pi(sk)->mode == L2CAP_MODE_ERTM) {
+		skb_queue_purge(SREJ_QUEUE(sk));
+		del_timer(&l2cap_pi(sk)->retrans_timer);
+		del_timer(&l2cap_pi(sk)->monitor_timer);
+	}
 
 	l2cap_chan_del(sk, 0);
 	bh_unlock_sock(sk);
@@ -3279,12 +3301,16 @@
 {
 	struct l2cap_pinfo *pi = l2cap_pi(sk);
 	u8 tx_seq = __get_txseq(rx_control);
+	u8 req_seq = __get_reqseq(rx_control);
 	u16 tx_control = 0;
 	u8 sar = rx_control >> L2CAP_CTRL_SAR_SHIFT;
 	int err = 0;
 
 	BT_DBG("sk %p rx_control 0x%4.4x len %d", sk, rx_control, skb->len);
 
+	pi->expected_ack_seq = req_seq;
+	l2cap_drop_acked_frames(sk);
+
 	if (tx_seq == pi->expected_tx_seq)
 		goto expected;
 
@@ -3339,6 +3365,16 @@
 		return 0;
 	}
 
+	if (rx_control & L2CAP_CTRL_FINAL) {
+		if (pi->conn_state & L2CAP_CONN_REJ_ACT)
+			pi->conn_state &= ~L2CAP_CONN_REJ_ACT;
+		else {
+			sk->sk_send_head = TX_QUEUE(sk)->next;
+			pi->next_tx_seq = pi->expected_ack_seq;
+			l2cap_ertm_send(sk);
+		}
+	}
+
 	pi->buffer_seq = (pi->buffer_seq + 1) % 64;
 
 	err = l2cap_sar_reassembly_sdu(sk, skb, rx_control);
@@ -3375,6 +3411,14 @@
 			pi->expected_ack_seq = tx_seq;
 			l2cap_drop_acked_frames(sk);
 
+			if (pi->conn_state & L2CAP_CONN_REJ_ACT)
+				pi->conn_state &= ~L2CAP_CONN_REJ_ACT;
+			else {
+				sk->sk_send_head = TX_QUEUE(sk)->next;
+				pi->next_tx_seq = pi->expected_ack_seq;
+				l2cap_ertm_send(sk);
+			}
+
 			if (!(pi->conn_state & L2CAP_CONN_WAIT_F))
 				break;
 
@@ -3387,8 +3431,8 @@
 			pi->expected_ack_seq = tx_seq;
 			l2cap_drop_acked_frames(sk);
 
-			if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY)
-					&& (pi->unacked_frames > 0))
+			if ((pi->conn_state & L2CAP_CONN_REMOTE_BUSY) &&
+			    (pi->unacked_frames > 0))
 				__mod_retrans_timer();
 
 			l2cap_ertm_send(sk);
@@ -3402,10 +3446,24 @@
 		pi->expected_ack_seq = __get_reqseq(rx_control);
 		l2cap_drop_acked_frames(sk);
 
-		sk->sk_send_head = TX_QUEUE(sk)->next;
-		pi->next_tx_seq = pi->expected_ack_seq;
+		if (rx_control & L2CAP_CTRL_FINAL) {
+			if (pi->conn_state & L2CAP_CONN_REJ_ACT)
+				pi->conn_state &= ~L2CAP_CONN_REJ_ACT;
+			else {
+				sk->sk_send_head = TX_QUEUE(sk)->next;
+				pi->next_tx_seq = pi->expected_ack_seq;
+				l2cap_ertm_send(sk);
+			}
+		} else {
+			sk->sk_send_head = TX_QUEUE(sk)->next;
+			pi->next_tx_seq = pi->expected_ack_seq;
+			l2cap_ertm_send(sk);
 
-		l2cap_ertm_send(sk);
+			if (pi->conn_state & L2CAP_CONN_WAIT_F) {
+				pi->srej_save_reqseq = tx_seq;
+				pi->conn_state |= L2CAP_CONN_REJ_ACT;
+			}
+		}
 
 		break;
 
@@ -3424,7 +3482,7 @@
 		} else if (rx_control & L2CAP_CTRL_FINAL) {
 			if ((pi->conn_state & L2CAP_CONN_SREJ_ACT) &&
 					pi->srej_save_reqseq == tx_seq)
-				pi->srej_save_reqseq &= ~L2CAP_CONN_SREJ_ACT;
+				pi->conn_state &= ~L2CAP_CONN_SREJ_ACT;
 			else
 				l2cap_retransmit_frame(sk, tx_seq);
 		}
@@ -3924,7 +3982,7 @@
 	.getsockopt	= l2cap_sock_getsockopt
 };
 
-static struct net_proto_family l2cap_sock_family_ops = {
+static const struct net_proto_family l2cap_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= l2cap_sock_create,
@@ -4003,6 +4061,9 @@
 module_param(enable_ertm, bool, 0644);
 MODULE_PARM_DESC(enable_ertm, "Enable enhanced retransmission mode");
 
+module_param(max_transmit, uint, 0644);
+MODULE_PARM_DESC(max_transmit, "Max transmit value (default = 3)");
+
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 25692bc..fc5ee32 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -51,6 +51,7 @@
 static int disable_cfc = 0;
 static int channel_mtu = -1;
 static unsigned int l2cap_mtu = RFCOMM_MAX_L2CAP_MTU;
+static int l2cap_ertm = 0;
 
 static struct task_struct *rfcomm_thread;
 
@@ -702,6 +703,8 @@
 	sk = sock->sk;
 	lock_sock(sk);
 	l2cap_pi(sk)->imtu = l2cap_mtu;
+	if (l2cap_ertm)
+		l2cap_pi(sk)->mode = L2CAP_MODE_ERTM;
 	release_sock(sk);
 
 	s = rfcomm_session_add(sock, BT_BOUND);
@@ -2185,6 +2188,9 @@
 module_param(l2cap_mtu, uint, 0644);
 MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
 
+module_param(l2cap_ertm, bool, 0644);
+MODULE_PARM_DESC(l2cap_ertm, "Use L2CAP ERTM mode for connection");
+
 MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 8a20aaf..4b5968d 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -323,7 +323,8 @@
 	return sk;
 }
 
-static int rfcomm_sock_create(struct net *net, struct socket *sock, int protocol)
+static int rfcomm_sock_create(struct net *net, struct socket *sock,
+			      int protocol, int kern)
 {
 	struct sock *sk;
 
@@ -703,7 +704,7 @@
 		copied += chunk;
 		size   -= chunk;
 
-		sock_recv_timestamp(msg, sk, skb);
+		sock_recv_ts_and_drops(msg, sk, skb);
 
 		if (!(flags & MSG_PEEK)) {
 			atomic_sub(chunk, &sk->sk_rmem_alloc);
@@ -1101,7 +1102,7 @@
 	.mmap		= sock_no_mmap
 };
 
-static struct net_proto_family rfcomm_sock_family_ops = {
+static const struct net_proto_family rfcomm_sock_family_ops = {
 	.family		= PF_BLUETOOTH,
 	.owner		= THIS_MODULE,
 	.create		= rfcomm_sock_create
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 77f4153..dd8f6ec 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -430,7 +430,8 @@
 	return sk;
 }
 
-static int sco_sock_create(struct net *net, struct socket *sock, int protocol)
+static int sco_sock_create(struct net *net, struct socket *sock, int protocol,
+			   int kern)
 {
 	struct sock *sk;
 
@@ -993,7 +994,7 @@
 	.getsockopt	= sco_sock_getsockopt
 };
 
-static struct net_proto_family sco_sock_family_ops = {
+static const struct net_proto_family sco_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= sco_sock_create,
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 07a0777..1a99c4e 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -157,6 +157,7 @@
 	.get_tso	= ethtool_op_get_tso,
 	.set_tso	= br_set_tso,
 	.get_ufo	= ethtool_op_get_ufo,
+	.set_ufo	= ethtool_op_set_ufo,
 	.get_flags	= ethtool_op_get_flags,
 };
 
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 57bf05c..3b8e038 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -60,8 +60,8 @@
 static inline int has_expired(const struct net_bridge *br,
 				  const struct net_bridge_fdb_entry *fdb)
 {
-	return !fdb->is_static
-		&& time_before_eq(fdb->ageing_timer + hold_time(br), jiffies);
+	return !fdb->is_static &&
+		time_before_eq(fdb->ageing_timer + hold_time(br), jiffies);
 }
 
 static inline int br_mac_hash(const unsigned char *mac)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 4a9f527..a2cbe61 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -154,7 +154,7 @@
 }
 
 /* called with RTNL */
-static void del_br(struct net_bridge *br)
+static void del_br(struct net_bridge *br, struct list_head *head)
 {
 	struct net_bridge_port *p, *n;
 
@@ -165,7 +165,7 @@
 	del_timer_sync(&br->gc_timer);
 
 	br_sysfs_delbr(br->dev);
-	unregister_netdevice(br->dev);
+	unregister_netdevice_queue(br->dev, head);
 }
 
 static struct net_device *new_bridge_dev(struct net *net, const char *name)
@@ -323,7 +323,7 @@
 	}
 
 	else
-		del_br(netdev_priv(dev));
+		del_br(netdev_priv(dev), NULL);
 
 	rtnl_unlock();
 	return ret;
@@ -390,6 +390,10 @@
 	if (dev->br_port != NULL)
 		return -EBUSY;
 
+	/* No bridging devices that dislike that (e.g. wireless) */
+	if (dev->priv_flags & IFF_DONT_BRIDGE)
+		return -EOPNOTSUPP;
+
 	p = new_nbp(br, dev);
 	if (IS_ERR(p))
 		return PTR_ERR(p);
@@ -466,15 +470,14 @@
 void br_net_exit(struct net *net)
 {
 	struct net_device *dev;
+	LIST_HEAD(list);
 
 	rtnl_lock();
-restart:
-	for_each_netdev(net, dev) {
-		if (dev->priv_flags & IFF_EBRIDGE) {
-			del_br(netdev_priv(dev));
-			goto restart;
-		}
-	}
+	for_each_netdev(net, dev)
+		if (dev->priv_flags & IFF_EBRIDGE)
+			del_br(netdev_priv(dev), &list);
+
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
 
 }
diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index 6a6433d..2af6e4a 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -81,6 +81,7 @@
 	return num;
 }
 
+/* called with RTNL */
 static int add_del_if(struct net_bridge *br, int ifindex, int isadd)
 {
 	struct net_device *dev;
@@ -89,7 +90,7 @@
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	dev = dev_get_by_index(dev_net(br->dev), ifindex);
+	dev = __dev_get_by_index(dev_net(br->dev), ifindex);
 	if (dev == NULL)
 		return -EINVAL;
 
@@ -98,7 +99,6 @@
 	else
 		ret = br_del_if(br, dev);
 
-	dev_put(dev);
 	return ret;
 }
 
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index a16a234..268e2e7 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -1013,12 +1013,12 @@
 		.mode		= 0644,
 		.proc_handler	= brnf_sysctl_call_tables,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path brnf_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "bridge", .ctl_name = NET_BRIDGE, },
+	{ .procname = "net", },
+	{ .procname = "bridge", },
 	{ }
 };
 #endif
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index ee4820a..bee4f30 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -316,9 +316,9 @@
 	if (new_addr[5] & ~0xf)
 		return -EINVAL;
 
-	if (new_addr[5] == 1 	/* 802.3x Pause address */
-	    || new_addr[5] == 2 /* 802.3ad Slow protocols */
-	    || new_addr[5] == 3) /* 802.1X PAE address */
+	if (new_addr[5] == 1 ||		/* 802.3x Pause address */
+	    new_addr[5] == 2 ||		/* 802.3ad Slow protocols */
+	    new_addr[5] == 3)		/* 802.1X PAE address */
 		return -EINVAL;
 
 	spin_lock_bh(&br->lock);
diff --git a/net/bridge/netfilter/ebt_stp.c b/net/bridge/netfilter/ebt_stp.c
index 48527e6..75e29a9 100644
--- a/net/bridge/netfilter/ebt_stp.c
+++ b/net/bridge/netfilter/ebt_stp.c
@@ -135,8 +135,8 @@
 	if (memcmp(sp, header, sizeof(header)))
 		return false;
 
-	if (info->bitmask & EBT_STP_TYPE
-	    && FWINV(info->type != sp->type, EBT_STP_TYPE))
+	if (info->bitmask & EBT_STP_TYPE &&
+	    FWINV(info->type != sp->type, EBT_STP_TYPE))
 		return false;
 
 	if (sp->type == BPDU_TYPE_CONFIG &&
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 6068321..51adc4c 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -114,7 +114,8 @@
 	skb_queue_purge(&sk->sk_receive_queue);
 }
 
-static int can_create(struct net *net, struct socket *sock, int protocol)
+static int can_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	struct sock *sk;
 	struct can_proto *cp;
@@ -125,7 +126,7 @@
 	if (protocol < 0 || protocol >= CAN_NPROTO)
 		return -EINVAL;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 #ifdef CONFIG_MODULES
@@ -160,11 +161,6 @@
 		goto errout;
 	}
 
-	if (cp->capability >= 0 && !capable(cp->capability)) {
-		err = -EPERM;
-		goto errout;
-	}
-
 	sock->ops = cp->ops;
 
 	sk = sk_alloc(net, PF_CAN, GFP_KERNEL, cp->prot);
@@ -379,8 +375,8 @@
 		return &d->rx[RX_ALL];
 
 	/* extra filterlists for the subscription of a single non-RTR can_id */
-	if (((*mask & CAN_EFF_RTR_FLAGS) == CAN_EFF_RTR_FLAGS)
-	    && !(*can_id & CAN_RTR_FLAG)) {
+	if (((*mask & CAN_EFF_RTR_FLAGS) == CAN_EFF_RTR_FLAGS) &&
+	    !(*can_id & CAN_RTR_FLAG)) {
 
 		if (*can_id & CAN_EFF_FLAG) {
 			if (*mask == (CAN_EFF_MASK | CAN_EFF_RTR_FLAGS)) {
@@ -529,8 +525,8 @@
 	 */
 
 	hlist_for_each_entry_rcu(r, next, rl, list) {
-		if (r->can_id == can_id && r->mask == mask
-		    && r->func == func && r->data == data)
+		if (r->can_id == can_id && r->mask == mask &&
+		    r->func == func && r->data == data)
 			break;
 	}
 
@@ -842,7 +838,7 @@
 	.func = can_rcv,
 };
 
-static struct net_proto_family can_family_ops __read_mostly = {
+static const struct net_proto_family can_family_ops = {
 	.family = PF_CAN,
 	.create = can_create,
 	.owner  = THIS_MODULE,
diff --git a/net/can/bcm.c b/net/can/bcm.c
index e8d58f3..e32af52 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -139,13 +139,13 @@
 	if (!ifindex)
 		return "any";
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(&init_net, ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(&init_net, ifindex);
 	if (dev)
 		strcpy(result, dev->name);
 	else
 		strcpy(result, "???");
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	return result;
 }
@@ -1539,7 +1539,7 @@
 		return err;
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
 		msg->msg_namelen = sizeof(struct sockaddr_can);
@@ -1581,7 +1581,6 @@
 static struct can_proto bcm_can_proto __read_mostly = {
 	.type       = SOCK_DGRAM,
 	.protocol   = CAN_BCM,
-	.capability = -1,
 	.ops        = &bcm_ops,
 	.prot       = &bcm_proto,
 };
diff --git a/net/can/raw.c b/net/can/raw.c
index b5e8979..abca920 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -424,8 +424,6 @@
 
 	if (level != SOL_CAN_RAW)
 		return -EINVAL;
-	if (optlen < 0)
-		return -EINVAL;
 
 	switch (optname) {
 
@@ -702,7 +700,7 @@
 		return err;
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
 		msg->msg_namelen = sizeof(struct sockaddr_can);
@@ -744,7 +742,6 @@
 static struct can_proto raw_can_proto __read_mostly = {
 	.type       = SOCK_RAW,
 	.protocol   = CAN_RAW,
-	.capability = -1,
 	.ops        = &raw_ops,
 	.prot       = &raw_proto,
 };
diff --git a/net/compat.c b/net/compat.c
index a407c3a..e1a56ad 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -390,9 +390,6 @@
 	int err;
 	struct socket *sock;
 
-	if (optlen < 0)
-		return -EINVAL;
-
 	if ((sock = sockfd_lookup(fd, &err))!=NULL)
 	{
 		err = security_socket_setsockopt(sock,level,optname);
@@ -727,10 +724,10 @@
 
 /* Argument list sizes for compat_sys_socketcall */
 #define AL(x) ((x) * sizeof(u32))
-static unsigned char nas[19]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
+static unsigned char nas[20]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
 				AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
 				AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
-				AL(4)};
+				AL(4),AL(5)};
 #undef AL
 
 asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned flags)
@@ -755,13 +752,40 @@
 	return sys_recvfrom(fd, buf, len, flags | MSG_CMSG_COMPAT, addr, addrlen);
 }
 
+asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+				    unsigned vlen, unsigned int flags,
+				    struct timespec __user *timeout)
+{
+	int datagrams;
+	struct timespec ktspec;
+	struct compat_timespec __user *utspec;
+
+	if (timeout == NULL)
+		return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
+				      flags | MSG_CMSG_COMPAT, NULL);
+
+	utspec = (struct compat_timespec __user *)timeout;
+	if (get_user(ktspec.tv_sec, &utspec->tv_sec) ||
+	    get_user(ktspec.tv_nsec, &utspec->tv_nsec))
+		return -EFAULT;
+
+	datagrams = __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
+				   flags | MSG_CMSG_COMPAT, &ktspec);
+	if (datagrams > 0 &&
+	    (put_user(ktspec.tv_sec, &utspec->tv_sec) ||
+	     put_user(ktspec.tv_nsec, &utspec->tv_nsec)))
+		datagrams = -EFAULT;
+
+	return datagrams;
+}
+
 asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 {
 	int ret;
 	u32 a[6];
 	u32 a0, a1;
 
-	if (call < SYS_SOCKET || call > SYS_ACCEPT4)
+	if (call < SYS_SOCKET || call > SYS_RECVMMSG)
 		return -EINVAL;
 	if (copy_from_user(a, args, nas[call]))
 		return -EFAULT;
@@ -823,6 +847,10 @@
 	case SYS_RECVMSG:
 		ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
 		break;
+	case SYS_RECVMMSG:
+		ret = compat_sys_recvmmsg(a0, compat_ptr(a1), a[2], a[3],
+					  compat_ptr(a[4]));
+		break;
 	case SYS_ACCEPT4:
 		ret = sys_accept4(a0, compat_ptr(a1), compat_ptr(a[2]), a[3]);
 		break;
diff --git a/net/core/Makefile b/net/core/Makefile
index 796f46e..08791ac 100644
--- a/net/core/Makefile
+++ b/net/core/Makefile
@@ -6,7 +6,6 @@
 	 gen_stats.o gen_estimator.o net_namespace.o
 
 obj-$(CONFIG_SYSCTL) += sysctl_net_core.o
-obj-$(CONFIG_HAS_DMA) += skb_dma_map.o
 
 obj-y		     += dev.o ethtool.o dev_mcast.o dst.o netevent.o \
 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 4ade301..95c2e08 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -271,6 +271,7 @@
 	}
 
 	kfree_skb(skb);
+	atomic_inc(&sk->sk_drops);
 	sk_mem_reclaim_partial(sk);
 
 	return err;
diff --git a/net/core/dev.c b/net/core/dev.c
index fe10551..c36a17a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -79,6 +79,7 @@
 #include <linux/cpu.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/hash.h>
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/string.h>
@@ -104,6 +105,7 @@
 #include <net/dst.h>
 #include <net/pkt_sched.h>
 #include <net/checksum.h>
+#include <net/xfrm.h>
 #include <linux/highmem.h>
 #include <linux/init.h>
 #include <linux/kmod.h>
@@ -175,7 +177,7 @@
  * The @dev_base_head list is protected by @dev_base_lock and the rtnl
  * semaphore.
  *
- * Pure readers hold dev_base_lock for reading.
+ * Pure readers hold dev_base_lock for reading, or rcu_read_lock()
  *
  * Writers must hold the rtnl semaphore while they loop through the
  * dev_base_head list, and hold dev_base_lock for writing when they do the
@@ -193,18 +195,15 @@
 DEFINE_RWLOCK(dev_base_lock);
 EXPORT_SYMBOL(dev_base_lock);
 
-#define NETDEV_HASHBITS	8
-#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
-
 static inline struct hlist_head *dev_name_hash(struct net *net, const char *name)
 {
 	unsigned hash = full_name_hash(name, strnlen(name, IFNAMSIZ));
-	return &net->dev_name_head[hash & ((1 << NETDEV_HASHBITS) - 1)];
+	return &net->dev_name_head[hash_32(hash, NETDEV_HASHBITS)];
 }
 
 static inline struct hlist_head *dev_index_hash(struct net *net, int ifindex)
 {
-	return &net->dev_index_head[ifindex & ((1 << NETDEV_HASHBITS) - 1)];
+	return &net->dev_index_head[ifindex & (NETDEV_HASHENTRIES - 1)];
 }
 
 /* Device list insertion */
@@ -215,23 +214,26 @@
 	ASSERT_RTNL();
 
 	write_lock_bh(&dev_base_lock);
-	list_add_tail(&dev->dev_list, &net->dev_base_head);
-	hlist_add_head(&dev->name_hlist, dev_name_hash(net, dev->name));
-	hlist_add_head(&dev->index_hlist, dev_index_hash(net, dev->ifindex));
+	list_add_tail_rcu(&dev->dev_list, &net->dev_base_head);
+	hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name));
+	hlist_add_head_rcu(&dev->index_hlist,
+			   dev_index_hash(net, dev->ifindex));
 	write_unlock_bh(&dev_base_lock);
 	return 0;
 }
 
-/* Device list removal */
+/* Device list removal
+ * caller must respect a RCU grace period before freeing/reusing dev
+ */
 static void unlist_netdevice(struct net_device *dev)
 {
 	ASSERT_RTNL();
 
 	/* Unlink dev from the device chain */
 	write_lock_bh(&dev_base_lock);
-	list_del(&dev->dev_list);
-	hlist_del(&dev->name_hlist);
-	hlist_del(&dev->index_hlist);
+	list_del_rcu(&dev->dev_list);
+	hlist_del_rcu(&dev->name_hlist);
+	hlist_del_rcu(&dev->index_hlist);
 	write_unlock_bh(&dev_base_lock);
 }
 
@@ -587,18 +589,44 @@
 struct net_device *__dev_get_by_name(struct net *net, const char *name)
 {
 	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_name_hash(net, name);
 
-	hlist_for_each(p, dev_name_hash(net, name)) {
-		struct net_device *dev
-			= hlist_entry(p, struct net_device, name_hlist);
+	hlist_for_each_entry(dev, p, head, name_hlist)
 		if (!strncmp(dev->name, name, IFNAMSIZ))
 			return dev;
-	}
+
 	return NULL;
 }
 EXPORT_SYMBOL(__dev_get_by_name);
 
 /**
+ *	dev_get_by_name_rcu	- find a device by its name
+ *	@net: the applicable net namespace
+ *	@name: name to find
+ *
+ *	Find an interface by name.
+ *	If the name is found a pointer to the device is returned.
+ * 	If the name is not found then %NULL is returned.
+ *	The reference counters are not incremented so the caller must be
+ *	careful with locks. The caller must hold RCU lock.
+ */
+
+struct net_device *dev_get_by_name_rcu(struct net *net, const char *name)
+{
+	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_name_hash(net, name);
+
+	hlist_for_each_entry_rcu(dev, p, head, name_hlist)
+		if (!strncmp(dev->name, name, IFNAMSIZ))
+			return dev;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dev_get_by_name_rcu);
+
+/**
  *	dev_get_by_name		- find a device by its name
  *	@net: the applicable net namespace
  *	@name: name to find
@@ -614,11 +642,11 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_name(net, name);
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(net, name);
 	if (dev)
 		dev_hold(dev);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 EXPORT_SYMBOL(dev_get_by_name);
@@ -638,17 +666,42 @@
 struct net_device *__dev_get_by_index(struct net *net, int ifindex)
 {
 	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_index_hash(net, ifindex);
 
-	hlist_for_each(p, dev_index_hash(net, ifindex)) {
-		struct net_device *dev
-			= hlist_entry(p, struct net_device, index_hlist);
+	hlist_for_each_entry(dev, p, head, index_hlist)
 		if (dev->ifindex == ifindex)
 			return dev;
-	}
+
 	return NULL;
 }
 EXPORT_SYMBOL(__dev_get_by_index);
 
+/**
+ *	dev_get_by_index_rcu - find a device by its ifindex
+ *	@net: the applicable net namespace
+ *	@ifindex: index of device
+ *
+ *	Search for an interface by index. Returns %NULL if the device
+ *	is not found or a pointer to the device. The device has not
+ *	had its reference counter increased so the caller must be careful
+ *	about locking. The caller must hold RCU lock.
+ */
+
+struct net_device *dev_get_by_index_rcu(struct net *net, int ifindex)
+{
+	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_index_hash(net, ifindex);
+
+	hlist_for_each_entry_rcu(dev, p, head, index_hlist)
+		if (dev->ifindex == ifindex)
+			return dev;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dev_get_by_index_rcu);
+
 
 /**
  *	dev_get_by_index - find a device by its ifindex
@@ -665,11 +718,11 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(net, ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, ifindex);
 	if (dev)
 		dev_hold(dev);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 EXPORT_SYMBOL(dev_get_by_index);
@@ -748,15 +801,15 @@
 	struct net_device *dev, *ret;
 
 	ret = NULL;
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		if (((dev->flags ^ if_flags) & mask) == 0) {
 			dev_hold(dev);
 			ret = dev;
 			break;
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return ret;
 }
 EXPORT_SYMBOL(dev_get_by_flags);
@@ -841,7 +894,8 @@
 		free_page((unsigned long) inuse);
 	}
 
-	snprintf(buf, IFNAMSIZ, name, i);
+	if (buf != name)
+		snprintf(buf, IFNAMSIZ, name, i);
 	if (!__dev_get_by_name(net, buf))
 		return i;
 
@@ -881,6 +935,21 @@
 }
 EXPORT_SYMBOL(dev_alloc_name);
 
+static int dev_get_valid_name(struct net *net, const char *name, char *buf,
+			      bool fmt)
+{
+	if (!dev_valid_name(name))
+		return -EINVAL;
+
+	if (fmt && strchr(name, '%'))
+		return __dev_alloc_name(net, name, buf);
+	else if (__dev_get_by_name(net, name))
+		return -EEXIST;
+	else if (buf != name)
+		strlcpy(buf, name, IFNAMSIZ);
+
+	return 0;
+}
 
 /**
  *	dev_change_name - change name of a device
@@ -904,28 +973,20 @@
 	if (dev->flags & IFF_UP)
 		return -EBUSY;
 
-	if (!dev_valid_name(newname))
-		return -EINVAL;
-
 	if (strncmp(newname, dev->name, IFNAMSIZ) == 0)
 		return 0;
 
 	memcpy(oldname, dev->name, IFNAMSIZ);
 
-	if (strchr(newname, '%')) {
-		err = dev_alloc_name(dev, newname);
-		if (err < 0)
-			return err;
-	} else if (__dev_get_by_name(net, newname))
-		return -EEXIST;
-	else
-		strlcpy(dev->name, newname, IFNAMSIZ);
+	err = dev_get_valid_name(net, newname, dev->name, 1);
+	if (err < 0)
+		return err;
 
 rollback:
 	/* For now only devices in the initial network namespace
 	 * are in sysfs.
 	 */
-	if (net == &init_net) {
+	if (net_eq(net, &init_net)) {
 		ret = device_rename(&dev->dev, dev->name);
 		if (ret) {
 			memcpy(dev->name, oldname, IFNAMSIZ);
@@ -935,7 +996,12 @@
 
 	write_lock_bh(&dev_base_lock);
 	hlist_del(&dev->name_hlist);
-	hlist_add_head(&dev->name_hlist, dev_name_hash(net, dev->name));
+	write_unlock_bh(&dev_base_lock);
+
+	synchronize_rcu();
+
+	write_lock_bh(&dev_base_lock);
+	hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name));
 	write_unlock_bh(&dev_base_lock);
 
 	ret = call_netdevice_notifiers(NETDEV_CHANGENAME, dev);
@@ -1038,9 +1104,9 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_name(net, name);
-	read_unlock(&dev_base_lock);
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(net, name);
+	rcu_read_unlock();
 
 	if (!dev && capable(CAP_NET_ADMIN))
 		request_module("%s", name);
@@ -1287,6 +1353,7 @@
 				nb->notifier_call(nb, NETDEV_DOWN, dev);
 			}
 			nb->notifier_call(nb, NETDEV_UNREGISTER, dev);
+			nb->notifier_call(nb, NETDEV_UNREGISTER_BATCH, dev);
 		}
 	}
 
@@ -1353,6 +1420,45 @@
 		skb->tstamp.tv64 = 0;
 }
 
+/**
+ * dev_forward_skb - loopback an skb to another netif
+ *
+ * @dev: destination network device
+ * @skb: buffer to forward
+ *
+ * return values:
+ *	NET_RX_SUCCESS	(no congestion)
+ *	NET_RX_DROP     (packet was dropped)
+ *
+ * dev_forward_skb can be used for injecting an skb from the
+ * start_xmit function of one device into the receive queue
+ * of another device.
+ *
+ * The receiving device may be in another namespace, so
+ * we have to clear all information in the skb that could
+ * impact namespace isolation.
+ */
+int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
+{
+	skb_orphan(skb);
+
+	if (!(dev->flags & IFF_UP))
+		return NET_RX_DROP;
+
+	if (skb->len > (dev->mtu + dev->hard_header_len))
+		return NET_RX_DROP;
+
+	skb_dst_drop(skb);
+	skb->tstamp.tv64 = 0;
+	skb->pkt_type = PACKET_HOST;
+	skb->protocol = eth_type_trans(skb, dev);
+	skb->mark = 0;
+	secpath_reset(skb);
+	nf_reset(skb);
+	return netif_rx(skb);
+}
+EXPORT_SYMBOL_GPL(dev_forward_skb);
+
 /*
  *	Support routine. Sends outgoing frames to any network
  *	taps currently in use.
@@ -1701,7 +1807,7 @@
 			struct netdev_queue *txq)
 {
 	const struct net_device_ops *ops = dev->netdev_ops;
-	int rc;
+	int rc = NETDEV_TX_OK;
 
 	if (likely(!skb->next)) {
 		if (!list_empty(&ptype_all))
@@ -1749,6 +1855,8 @@
 		nskb->next = NULL;
 		rc = ops->ndo_start_xmit(nskb, dev);
 		if (unlikely(rc != NETDEV_TX_OK)) {
+			if (rc & ~NETDEV_TX_MASK)
+				goto out_kfree_gso_skb;
 			nskb->next = skb->next;
 			skb->next = nskb;
 			return rc;
@@ -1758,11 +1866,12 @@
 			return NETDEV_TX_BUSY;
 	} while (skb->next);
 
-	skb->destructor = DEV_GSO_CB(skb)->destructor;
-
+out_kfree_gso_skb:
+	if (likely(skb->next == NULL))
+		skb->destructor = DEV_GSO_CB(skb)->destructor;
 out_kfree_skb:
 	kfree_skb(skb);
-	return NETDEV_TX_OK;
+	return rc;
 }
 
 static u32 skb_tx_hashrnd;
@@ -1789,16 +1898,43 @@
 }
 EXPORT_SYMBOL(skb_tx_hash);
 
+static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index)
+{
+	if (unlikely(queue_index >= dev->real_num_tx_queues)) {
+		if (net_ratelimit()) {
+			WARN(1, "%s selects TX queue %d, but "
+			     "real number of TX queues is %d\n",
+			     dev->name, queue_index,
+			     dev->real_num_tx_queues);
+		}
+		return 0;
+	}
+	return queue_index;
+}
+
 static struct netdev_queue *dev_pick_tx(struct net_device *dev,
 					struct sk_buff *skb)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
-	u16 queue_index = 0;
+	u16 queue_index;
+	struct sock *sk = skb->sk;
 
-	if (ops->ndo_select_queue)
-		queue_index = ops->ndo_select_queue(dev, skb);
-	else if (dev->real_num_tx_queues > 1)
-		queue_index = skb_tx_hash(dev, skb);
+	if (sk_tx_queue_recorded(sk)) {
+		queue_index = sk_tx_queue_get(sk);
+	} else {
+		const struct net_device_ops *ops = dev->netdev_ops;
+
+		if (ops->ndo_select_queue) {
+			queue_index = ops->ndo_select_queue(dev, skb);
+			queue_index = dev_cap_txqueue(dev, queue_index);
+		} else {
+			queue_index = 0;
+			if (dev->real_num_tx_queues > 1)
+				queue_index = skb_tx_hash(dev, skb);
+
+			if (sk && sk->sk_dst_cache)
+				sk_tx_queue_set(sk, queue_index);
+		}
+	}
 
 	skb_set_queue_mapping(skb, queue_index);
 	return netdev_get_tx_queue(dev, queue_index);
@@ -1935,8 +2071,8 @@
 			HARD_TX_LOCK(dev, txq, cpu);
 
 			if (!netif_tx_queue_stopped(txq)) {
-				rc = NET_XMIT_SUCCESS;
-				if (!dev_hard_start_xmit(skb, dev, txq)) {
+				rc = dev_hard_start_xmit(skb, dev, txq);
+				if (dev_xmit_complete(rc)) {
 					HARD_TX_UNLOCK(dev, txq);
 					goto out;
 				}
@@ -2191,7 +2327,7 @@
 	if (MAX_RED_LOOP < ttl++) {
 		printk(KERN_WARNING
 		       "Redir loop detected Dropping packet (%d->%d)\n",
-		       skb->iif, dev->ifindex);
+		       skb->skb_iif, dev->ifindex);
 		return TC_ACT_SHOT;
 	}
 
@@ -2292,15 +2428,15 @@
 	if (!skb->tstamp.tv64)
 		net_timestamp(skb);
 
-	if (skb->vlan_tci && vlan_hwaccel_do_receive(skb))
+	if (vlan_tx_tag_present(skb) && vlan_hwaccel_do_receive(skb))
 		return NET_RX_SUCCESS;
 
 	/* if we've gotten here through NAPI, check netpoll */
 	if (netpoll_receive_skb(skb))
 		return NET_RX_DROP;
 
-	if (!skb->iif)
-		skb->iif = skb->dev->ifindex;
+	if (!skb->skb_iif)
+		skb->skb_iif = skb->dev->ifindex;
 
 	null_or_orig = NULL;
 	orig_dev = skb->dev;
@@ -2440,7 +2576,7 @@
 }
 EXPORT_SYMBOL(napi_gro_flush);
 
-int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff **pp = NULL;
 	struct packet_type *ptype;
@@ -2448,7 +2584,7 @@
 	struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK];
 	int same_flow;
 	int mac_len;
-	int ret;
+	enum gro_result ret;
 
 	if (!(skb->dev->features & NETIF_F_GRO))
 		goto normal;
@@ -2532,7 +2668,8 @@
 }
 EXPORT_SYMBOL(dev_gro_receive);
 
-static int __napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+static gro_result_t
+__napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff *p;
 
@@ -2540,33 +2677,35 @@
 		return GRO_NORMAL;
 
 	for (p = napi->gro_list; p; p = p->next) {
-		NAPI_GRO_CB(p)->same_flow = (p->dev == skb->dev)
-			&& !compare_ether_header(skb_mac_header(p),
-						 skb_gro_mac_header(skb));
+		NAPI_GRO_CB(p)->same_flow =
+			(p->dev == skb->dev) &&
+			!compare_ether_header(skb_mac_header(p),
+					      skb_gro_mac_header(skb));
 		NAPI_GRO_CB(p)->flush = 0;
 	}
 
 	return dev_gro_receive(napi, skb);
 }
 
-int napi_skb_finish(int ret, struct sk_buff *skb)
+gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb)
 {
-	int err = NET_RX_SUCCESS;
-
 	switch (ret) {
 	case GRO_NORMAL:
-		return netif_receive_skb(skb);
+		if (netif_receive_skb(skb))
+			ret = GRO_DROP;
+		break;
 
 	case GRO_DROP:
-		err = NET_RX_DROP;
-		/* fall through */
-
 	case GRO_MERGED_FREE:
 		kfree_skb(skb);
 		break;
+
+	case GRO_HELD:
+	case GRO_MERGED:
+		break;
 	}
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL(napi_skb_finish);
 
@@ -2586,7 +2725,7 @@
 }
 EXPORT_SYMBOL(skb_gro_reset_offset);
 
-int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	skb_gro_reset_offset(skb);
 
@@ -2605,49 +2744,41 @@
 
 struct sk_buff *napi_get_frags(struct napi_struct *napi)
 {
-	struct net_device *dev = napi->dev;
 	struct sk_buff *skb = napi->skb;
 
 	if (!skb) {
-		skb = netdev_alloc_skb(dev, GRO_MAX_HEAD + NET_IP_ALIGN);
-		if (!skb)
-			goto out;
-
-		skb_reserve(skb, NET_IP_ALIGN);
-
-		napi->skb = skb;
+		skb = netdev_alloc_skb_ip_align(napi->dev, GRO_MAX_HEAD);
+		if (skb)
+			napi->skb = skb;
 	}
-
-out:
 	return skb;
 }
 EXPORT_SYMBOL(napi_get_frags);
 
-int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
+gro_result_t napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb,
+			       gro_result_t ret)
 {
-	int err = NET_RX_SUCCESS;
-
 	switch (ret) {
 	case GRO_NORMAL:
 	case GRO_HELD:
 		skb->protocol = eth_type_trans(skb, napi->dev);
 
-		if (ret == GRO_NORMAL)
-			return netif_receive_skb(skb);
-
-		skb_gro_pull(skb, -ETH_HLEN);
+		if (ret == GRO_HELD)
+			skb_gro_pull(skb, -ETH_HLEN);
+		else if (netif_receive_skb(skb))
+			ret = GRO_DROP;
 		break;
 
 	case GRO_DROP:
-		err = NET_RX_DROP;
-		/* fall through */
-
 	case GRO_MERGED_FREE:
 		napi_reuse_skb(napi, skb);
 		break;
+
+	case GRO_MERGED:
+		break;
 	}
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL(napi_frags_finish);
 
@@ -2688,12 +2819,12 @@
 }
 EXPORT_SYMBOL(napi_frags_skb);
 
-int napi_gro_frags(struct napi_struct *napi)
+gro_result_t napi_gro_frags(struct napi_struct *napi)
 {
 	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
-		return NET_RX_DROP;
+		return GRO_DROP;
 
 	return napi_frags_finish(napi, skb, __napi_gro_receive(napi, skb));
 }
@@ -2938,15 +3069,15 @@
 	if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
 		return -EFAULT;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(net, ifr.ifr_ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, ifr.ifr_ifindex);
 	if (!dev) {
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		return -ENODEV;
 	}
 
 	strcpy(ifr.ifr_name, dev->name);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	if (copy_to_user(arg, &ifr, sizeof(struct ifreq)))
 		return -EFAULT;
@@ -3016,18 +3147,18 @@
  *	in detail.
  */
 void *dev_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(RCU)
 {
 	struct net *net = seq_file_net(seq);
 	loff_t off;
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	if (!*pos)
 		return SEQ_START_TOKEN;
 
 	off = 1;
-	for_each_netdev(net, dev)
+	for_each_netdev_rcu(net, dev)
 		if (off++ == *pos)
 			return dev;
 
@@ -3036,16 +3167,18 @@
 
 void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
-	struct net *net = seq_file_net(seq);
+	struct net_device *dev = (v == SEQ_START_TOKEN) ?
+				  first_net_device(seq_file_net(seq)) :
+				  next_net_device((struct net_device *)v);
+
 	++*pos;
-	return v == SEQ_START_TOKEN ?
-		first_net_device(net) : next_net_device((struct net_device *)v);
+	return rcu_dereference(dev);
 }
 
 void dev_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(RCU)
 {
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev)
@@ -4254,12 +4387,12 @@
 EXPORT_SYMBOL(dev_set_mac_address);
 
 /*
- *	Perform the SIOCxIFxxx calls, inside read_lock(dev_base_lock)
+ *	Perform the SIOCxIFxxx calls, inside rcu_read_lock()
  */
 static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cmd)
 {
 	int err;
-	struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name);
+	struct net_device *dev = dev_get_by_name_rcu(net, ifr->ifr_name);
 
 	if (!dev)
 		return -ENODEV;
@@ -4491,9 +4624,9 @@
 	case SIOCGIFINDEX:
 	case SIOCGIFTXQLEN:
 		dev_load(net, ifr.ifr_name);
-		read_lock(&dev_base_lock);
+		rcu_read_lock();
 		ret = dev_ifsioc_locked(net, &ifr, cmd);
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		if (!ret) {
 			if (colon)
 				*colon = ':';
@@ -4636,59 +4769,80 @@
 	list_add_tail(&dev->todo_list, &net_todo_list);
 }
 
-static void rollback_registered(struct net_device *dev)
+static void rollback_registered_many(struct list_head *head)
 {
+	struct net_device *dev;
+
 	BUG_ON(dev_boot_phase);
 	ASSERT_RTNL();
 
-	/* Some devices call without registering for initialization unwind. */
-	if (dev->reg_state == NETREG_UNINITIALIZED) {
-		printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
-				  "was registered\n", dev->name, dev);
+	list_for_each_entry(dev, head, unreg_list) {
+		/* Some devices call without registering
+		 * for initialization unwind.
+		 */
+		if (dev->reg_state == NETREG_UNINITIALIZED) {
+			pr_debug("unregister_netdevice: device %s/%p never "
+				 "was registered\n", dev->name, dev);
 
-		WARN_ON(1);
-		return;
+			WARN_ON(1);
+			return;
+		}
+
+		BUG_ON(dev->reg_state != NETREG_REGISTERED);
+
+		/* If device is running, close it first. */
+		dev_close(dev);
+
+		/* And unlink it from device chain. */
+		unlist_netdevice(dev);
+
+		dev->reg_state = NETREG_UNREGISTERING;
 	}
 
-	BUG_ON(dev->reg_state != NETREG_REGISTERED);
+	synchronize_net();
 
-	/* If device is running, close it first. */
-	dev_close(dev);
+	list_for_each_entry(dev, head, unreg_list) {
+		/* Shutdown queueing discipline. */
+		dev_shutdown(dev);
 
-	/* And unlink it from device chain. */
-	unlist_netdevice(dev);
 
-	dev->reg_state = NETREG_UNREGISTERING;
+		/* Notify protocols, that we are about to destroy
+		   this device. They should clean all the things.
+		*/
+		call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
+
+		/*
+		 *	Flush the unicast and multicast chains
+		 */
+		dev_unicast_flush(dev);
+		dev_addr_discard(dev);
+
+		if (dev->netdev_ops->ndo_uninit)
+			dev->netdev_ops->ndo_uninit(dev);
+
+		/* Notifier chain MUST detach us from master device. */
+		WARN_ON(dev->master);
+
+		/* Remove entries from kobject tree */
+		netdev_unregister_kobject(dev);
+	}
+
+	/* Process any work delayed until the end of the batch */
+	dev = list_entry(head->next, struct net_device, unreg_list);
+	call_netdevice_notifiers(NETDEV_UNREGISTER_BATCH, dev);
 
 	synchronize_net();
 
-	/* Shutdown queueing discipline. */
-	dev_shutdown(dev);
+	list_for_each_entry(dev, head, unreg_list)
+		dev_put(dev);
+}
 
+static void rollback_registered(struct net_device *dev)
+{
+	LIST_HEAD(single);
 
-	/* Notify protocols, that we are about to destroy
-	   this device. They should clean all the things.
-	*/
-	call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
-
-	/*
-	 *	Flush the unicast and multicast chains
-	 */
-	dev_unicast_flush(dev);
-	dev_addr_discard(dev);
-
-	if (dev->netdev_ops->ndo_uninit)
-		dev->netdev_ops->ndo_uninit(dev);
-
-	/* Notifier chain MUST detach us from master device. */
-	WARN_ON(dev->master);
-
-	/* Remove entries from kobject tree */
-	netdev_unregister_kobject(dev);
-
-	synchronize_net();
-
-	dev_put(dev);
+	list_add(&dev->unreg_list, &single);
+	rollback_registered_many(&single);
 }
 
 static void __netdev_init_queue_locks_one(struct net_device *dev,
@@ -4747,6 +4901,33 @@
 EXPORT_SYMBOL(netdev_fix_features);
 
 /**
+ *	netif_stacked_transfer_operstate -	transfer operstate
+ *	@rootdev: the root or lower level device to transfer state from
+ *	@dev: the device to transfer operstate to
+ *
+ *	Transfer operational state from root to device. This is normally
+ *	called when a stacking relationship exists between the root
+ *	device and the device(a leaf device).
+ */
+void netif_stacked_transfer_operstate(const struct net_device *rootdev,
+					struct net_device *dev)
+{
+	if (rootdev->operstate == IF_OPER_DORMANT)
+		netif_dormant_on(dev);
+	else
+		netif_dormant_off(dev);
+
+	if (netif_carrier_ok(rootdev)) {
+		if (!netif_carrier_ok(dev))
+			netif_carrier_on(dev);
+	} else {
+		if (netif_carrier_ok(dev))
+			netif_carrier_off(dev);
+	}
+}
+EXPORT_SYMBOL(netif_stacked_transfer_operstate);
+
+/**
  *	register_netdevice	- register a network device
  *	@dev: device to register
  *
@@ -4765,8 +4946,6 @@
 
 int register_netdevice(struct net_device *dev)
 {
-	struct hlist_head *head;
-	struct hlist_node *p;
 	int ret;
 	struct net *net = dev_net(dev);
 
@@ -4795,26 +4974,14 @@
 		}
 	}
 
-	if (!dev_valid_name(dev->name)) {
-		ret = -EINVAL;
+	ret = dev_get_valid_name(net, dev->name, dev->name, 0);
+	if (ret)
 		goto err_uninit;
-	}
 
 	dev->ifindex = dev_new_index(net);
 	if (dev->iflink == -1)
 		dev->iflink = dev->ifindex;
 
-	/* Check for existence of name */
-	head = dev_name_hash(net, dev->name);
-	hlist_for_each(p, head) {
-		struct net_device *d
-			= hlist_entry(p, struct net_device, name_hlist);
-		if (!strncmp(d->name, dev->name, IFNAMSIZ)) {
-			ret = -EEXIST;
-			goto err_uninit;
-		}
-	}
-
 	/* Fix illegal checksum combinations */
 	if ((dev->features & NETIF_F_HW_CSUM) &&
 	    (dev->features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
@@ -4837,6 +5004,12 @@
 		dev->features |= NETIF_F_GSO;
 
 	netdev_initialize_kobject(dev);
+
+	ret = call_netdevice_notifiers(NETDEV_POST_INIT, dev);
+	ret = notifier_to_errno(ret);
+	if (ret)
+		goto err_uninit;
+
 	ret = netdev_register_kobject(dev);
 	if (ret)
 		goto err_uninit;
@@ -4961,6 +5134,8 @@
 {
 	unsigned long rebroadcast_time, warning_time;
 
+	linkwatch_forget_dev(dev);
+
 	rebroadcast_time = warning_time = jiffies;
 	while (atomic_read(&dev->refcnt) != 0) {
 		if (time_after(jiffies, rebroadcast_time + 1 * HZ)) {
@@ -4968,6 +5143,8 @@
 
 			/* Rebroadcast unregister notification */
 			call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
+			/* don't resend NETDEV_UNREGISTER_BATCH, _BATCH users
+			 * should have already handle it the first time */
 
 			if (test_bit(__LINK_STATE_LINKWATCH_PENDING,
 				     &dev->state)) {
@@ -5063,6 +5240,32 @@
 }
 
 /**
+ *	dev_txq_stats_fold - fold tx_queues stats
+ *	@dev: device to get statistics from
+ *	@stats: struct net_device_stats to hold results
+ */
+void dev_txq_stats_fold(const struct net_device *dev,
+			struct net_device_stats *stats)
+{
+	unsigned long tx_bytes = 0, tx_packets = 0, tx_dropped = 0;
+	unsigned int i;
+	struct netdev_queue *txq;
+
+	for (i = 0; i < dev->num_tx_queues; i++) {
+		txq = netdev_get_tx_queue(dev, i);
+		tx_bytes   += txq->tx_bytes;
+		tx_packets += txq->tx_packets;
+		tx_dropped += txq->tx_dropped;
+	}
+	if (tx_bytes || tx_packets || tx_dropped) {
+		stats->tx_bytes   = tx_bytes;
+		stats->tx_packets = tx_packets;
+		stats->tx_dropped = tx_dropped;
+	}
+}
+EXPORT_SYMBOL(dev_txq_stats_fold);
+
+/**
  *	dev_get_stats	- get network device statistics
  *	@dev: device to get statistics from
  *
@@ -5076,25 +5279,9 @@
 
 	if (ops->ndo_get_stats)
 		return ops->ndo_get_stats(dev);
-	else {
-		unsigned long tx_bytes = 0, tx_packets = 0, tx_dropped = 0;
-		struct net_device_stats *stats = &dev->stats;
-		unsigned int i;
-		struct netdev_queue *txq;
 
-		for (i = 0; i < dev->num_tx_queues; i++) {
-			txq = netdev_get_tx_queue(dev, i);
-			tx_bytes   += txq->tx_bytes;
-			tx_packets += txq->tx_packets;
-			tx_dropped += txq->tx_dropped;
-		}
-		if (tx_bytes || tx_packets || tx_dropped) {
-			stats->tx_bytes   = tx_bytes;
-			stats->tx_packets = tx_packets;
-			stats->tx_dropped = tx_dropped;
-		}
-		return stats;
-	}
+	dev_txq_stats_fold(dev, &dev->stats);
+	return &dev->stats;
 }
 EXPORT_SYMBOL(dev_get_stats);
 
@@ -5174,6 +5361,8 @@
 	netdev_init_queues(dev);
 
 	INIT_LIST_HEAD(&dev->napi_list);
+	INIT_LIST_HEAD(&dev->unreg_list);
+	INIT_LIST_HEAD(&dev->link_watch_list);
 	dev->priv_flags = IFF_XMIT_DST_RELEASE;
 	setup(dev);
 	strcpy(dev->name, name);
@@ -5238,25 +5427,47 @@
 EXPORT_SYMBOL(synchronize_net);
 
 /**
- *	unregister_netdevice - remove device from the kernel
+ *	unregister_netdevice_queue - remove device from the kernel
  *	@dev: device
+ *	@head: list
  *
  *	This function shuts down a device interface and removes it
  *	from the kernel tables.
+ *	If head not NULL, device is queued to be unregistered later.
  *
  *	Callers must hold the rtnl semaphore.  You may want
  *	unregister_netdev() instead of this.
  */
 
-void unregister_netdevice(struct net_device *dev)
+void unregister_netdevice_queue(struct net_device *dev, struct list_head *head)
 {
 	ASSERT_RTNL();
 
-	rollback_registered(dev);
-	/* Finish processing unregister after unlock */
-	net_set_todo(dev);
+	if (head) {
+		list_move_tail(&dev->unreg_list, head);
+	} else {
+		rollback_registered(dev);
+		/* Finish processing unregister after unlock */
+		net_set_todo(dev);
+	}
 }
-EXPORT_SYMBOL(unregister_netdevice);
+EXPORT_SYMBOL(unregister_netdevice_queue);
+
+/**
+ *	unregister_netdevice_many - unregister many devices
+ *	@head: list of devices
+ */
+void unregister_netdevice_many(struct list_head *head)
+{
+	struct net_device *dev;
+
+	if (!list_empty(head)) {
+		rollback_registered_many(head);
+		list_for_each_entry(dev, head, unreg_list)
+			net_set_todo(dev);
+	}
+}
+EXPORT_SYMBOL(unregister_netdevice_many);
 
 /**
  *	unregister_netdev - remove device from the kernel
@@ -5293,8 +5504,6 @@
 
 int dev_change_net_namespace(struct net_device *dev, struct net *net, const char *pat)
 {
-	char buf[IFNAMSIZ];
-	const char *destname;
 	int err;
 
 	ASSERT_RTNL();
@@ -5327,20 +5536,11 @@
 	 * we can use it in the destination network namespace.
 	 */
 	err = -EEXIST;
-	destname = dev->name;
-	if (__dev_get_by_name(net, destname)) {
+	if (__dev_get_by_name(net, dev->name)) {
 		/* We get here if we can't use the current device name */
 		if (!pat)
 			goto out;
-		if (!dev_valid_name(pat))
-			goto out;
-		if (strchr(pat, '%')) {
-			if (__dev_alloc_name(net, pat, buf) < 0)
-				goto out;
-			destname = buf;
-		} else
-			destname = pat;
-		if (__dev_get_by_name(net, destname))
+		if (dev_get_valid_name(net, pat, dev->name, 1))
 			goto out;
 	}
 
@@ -5364,6 +5564,7 @@
 	   this device. They should clean all the things.
 	*/
 	call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
+	call_netdevice_notifiers(NETDEV_UNREGISTER_BATCH, dev);
 
 	/*
 	 *	Flush the unicast and multicast chains
@@ -5376,10 +5577,6 @@
 	/* Actually switch the network namespace */
 	dev_net_set(dev, net);
 
-	/* Assign the new device name */
-	if (destname != dev->name)
-		strcpy(dev->name, destname);
-
 	/* If there is an ifindex conflict assign a new one */
 	if (__dev_get_by_index(net, dev->ifindex)) {
 		int iflink = (dev->iflink == dev->ifindex);
@@ -5484,7 +5681,7 @@
 	one |= NETIF_F_ALL_CSUM;
 
 	one |= all & NETIF_F_ONE_FOR_ALL;
-	all &= one | NETIF_F_LLTX | NETIF_F_GSO;
+	all &= one | NETIF_F_LLTX | NETIF_F_GSO | NETIF_F_UFO;
 	all |= one & mask & NETIF_F_ONE_FOR_ALL;
 
 	return all;
@@ -5566,14 +5763,13 @@
 
 static void __net_exit default_device_exit(struct net *net)
 {
-	struct net_device *dev;
+	struct net_device *dev, *aux;
 	/*
-	 * Push all migratable of the network devices back to the
+	 * Push all migratable network devices back to the
 	 * initial network namespace
 	 */
 	rtnl_lock();
-restart:
-	for_each_netdev(net, dev) {
+	for_each_netdev_safe(net, dev, aux) {
 		int err;
 		char fb_name[IFNAMSIZ];
 
@@ -5581,11 +5777,9 @@
 		if (dev->features & NETIF_F_NETNS_LOCAL)
 			continue;
 
-		/* Delete virtual devices */
-		if (dev->rtnl_link_ops && dev->rtnl_link_ops->dellink) {
-			dev->rtnl_link_ops->dellink(dev);
-			goto restart;
-		}
+		/* Leave virtual devices for the generic cleanup */
+		if (dev->rtnl_link_ops)
+			continue;
 
 		/* Push remaing network devices to init_net */
 		snprintf(fb_name, IFNAMSIZ, "dev%d", dev->ifindex);
@@ -5595,13 +5789,37 @@
 				__func__, dev->name, err);
 			BUG();
 		}
-		goto restart;
 	}
 	rtnl_unlock();
 }
 
+static void __net_exit default_device_exit_batch(struct list_head *net_list)
+{
+	/* At exit all network devices most be removed from a network
+	 * namespace.  Do this in the reverse order of registeration.
+	 * Do this across as many network namespaces as possible to
+	 * improve batching efficiency.
+	 */
+	struct net_device *dev;
+	struct net *net;
+	LIST_HEAD(dev_kill_list);
+
+	rtnl_lock();
+	list_for_each_entry(net, net_list, exit_list) {
+		for_each_netdev_reverse(net, dev) {
+			if (dev->rtnl_link_ops)
+				dev->rtnl_link_ops->dellink(dev, &dev_kill_list);
+			else
+				unregister_netdevice_queue(dev, &dev_kill_list);
+		}
+	}
+	unregister_netdevice_many(&dev_kill_list);
+	rtnl_unlock();
+}
+
 static struct pernet_operations __net_initdata default_device_ops = {
 	.exit = default_device_exit,
+	.exit_batch = default_device_exit_batch,
 };
 
 /*
diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c
index 0a113f2..b8e9d3a 100644
--- a/net/core/drop_monitor.c
+++ b/net/core/drop_monitor.c
@@ -41,7 +41,7 @@
  * netlink alerts
  */
 static int trace_state = TRACE_OFF;
-static spinlock_t trace_state_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(trace_state_lock);
 
 struct per_cpu_dm_data {
 	struct work_struct dm_alert_work;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 4c12ddb..d8aee58 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -198,13 +198,6 @@
 		rc = ops->get_sset_count(dev, ETH_SS_PRIV_FLAGS);
 		if (rc >= 0)
 			info.n_priv_flags = rc;
-	} else {
-		/* code path for obsolete hooks */
-
-		if (ops->self_test_count)
-			info.testinfo_len = ops->self_test_count(dev);
-		if (ops->get_stats_count)
-			info.n_stats = ops->get_stats_count(dev);
 	}
 	if (ops->get_regs_len)
 		info.regdump_len = ops->get_regs_len(dev);
@@ -309,6 +302,26 @@
 	return ret;
 }
 
+static int ethtool_reset(struct net_device *dev, char __user *useraddr)
+{
+	struct ethtool_value reset;
+	int ret;
+
+	if (!dev->ethtool_ops->reset)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&reset, useraddr, sizeof(reset)))
+		return -EFAULT;
+
+	ret = dev->ethtool_ops->reset(dev, &reset.data);
+	if (ret)
+		return ret;
+
+	if (copy_to_user(useraddr, &reset, sizeof(reset)))
+		return -EFAULT;
+	return 0;
+}
+
 static int ethtool_get_wol(struct net_device *dev, char __user *useraddr)
 {
 	struct ethtool_wolinfo wol = { ETHTOOL_GWOL };
@@ -684,16 +697,10 @@
 	u64 *data;
 	int ret, test_len;
 
-	if (!ops->self_test)
-		return -EOPNOTSUPP;
-	if (!ops->get_sset_count && !ops->self_test_count)
+	if (!ops->self_test || !ops->get_sset_count)
 		return -EOPNOTSUPP;
 
-	if (ops->get_sset_count)
-		test_len = ops->get_sset_count(dev, ETH_SS_TEST);
-	else
-		/* code path for obsolete hook */
-		test_len = ops->self_test_count(dev);
+	test_len = ops->get_sset_count(dev, ETH_SS_TEST);
 	if (test_len < 0)
 		return test_len;
 	WARN_ON(test_len == 0);
@@ -728,36 +735,17 @@
 	u8 *data;
 	int ret;
 
-	if (!ops->get_strings)
+	if (!ops->get_strings || !ops->get_sset_count)
 		return -EOPNOTSUPP;
 
 	if (copy_from_user(&gstrings, useraddr, sizeof(gstrings)))
 		return -EFAULT;
 
-	if (ops->get_sset_count) {
-		ret = ops->get_sset_count(dev, gstrings.string_set);
-		if (ret < 0)
-			return ret;
+	ret = ops->get_sset_count(dev, gstrings.string_set);
+	if (ret < 0)
+		return ret;
 
-		gstrings.len = ret;
-	} else {
-		/* code path for obsolete hooks */
-
-		switch (gstrings.string_set) {
-		case ETH_SS_TEST:
-			if (!ops->self_test_count)
-				return -EOPNOTSUPP;
-			gstrings.len = ops->self_test_count(dev);
-			break;
-		case ETH_SS_STATS:
-			if (!ops->get_stats_count)
-				return -EOPNOTSUPP;
-			gstrings.len = ops->get_stats_count(dev);
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
+	gstrings.len = ret;
 
 	data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
 	if (!data)
@@ -798,16 +786,10 @@
 	u64 *data;
 	int ret, n_stats;
 
-	if (!ops->get_ethtool_stats)
-		return -EOPNOTSUPP;
-	if (!ops->get_sset_count && !ops->get_stats_count)
+	if (!ops->get_ethtool_stats || !ops->get_sset_count)
 		return -EOPNOTSUPP;
 
-	if (ops->get_sset_count)
-		n_stats = ops->get_sset_count(dev, ETH_SS_STATS);
-	else
-		/* code path for obsolete hook */
-		n_stats = ops->get_stats_count(dev);
+	n_stats = ops->get_sset_count(dev, ETH_SS_STATS);
 	if (n_stats < 0)
 		return n_stats;
 	WARN_ON(n_stats == 0);
@@ -1127,6 +1109,9 @@
 	case ETHTOOL_FLASHDEV:
 		rc = ethtool_flash_device(dev, useraddr);
 		break;
+	case ETHTOOL_RESET:
+		rc = ethtool_reset(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index bd30938..02a3b2c 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -72,7 +72,7 @@
 		ops->flush_cache(ops);
 }
 
-int fib_rules_register(struct fib_rules_ops *ops)
+static int __fib_rules_register(struct fib_rules_ops *ops)
 {
 	int err = -EEXIST;
 	struct fib_rules_ops *o;
@@ -102,6 +102,28 @@
 	return err;
 }
 
+struct fib_rules_ops *
+fib_rules_register(struct fib_rules_ops *tmpl, struct net *net)
+{
+	struct fib_rules_ops *ops;
+	int err;
+
+	ops = kmemdup(tmpl, sizeof (*ops), GFP_KERNEL);
+	if (ops == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	INIT_LIST_HEAD(&ops->rules_list);
+	ops->fro_net = net;
+
+	err = __fib_rules_register(ops);
+	if (err) {
+		kfree(ops);
+		ops = ERR_PTR(err);
+	}
+
+	return ops;
+}
+
 EXPORT_SYMBOL_GPL(fib_rules_register);
 
 void fib_rules_cleanup_ops(struct fib_rules_ops *ops)
@@ -115,6 +137,15 @@
 }
 EXPORT_SYMBOL_GPL(fib_rules_cleanup_ops);
 
+static void fib_rules_put_rcu(struct rcu_head *head)
+{
+	struct fib_rules_ops *ops = container_of(head, struct fib_rules_ops, rcu);
+	struct net *net = ops->fro_net;
+
+	release_net(net);
+	kfree(ops);
+}
+
 void fib_rules_unregister(struct fib_rules_ops *ops)
 {
 	struct net *net = ops->fro_net;
@@ -124,8 +155,7 @@
 	fib_rules_cleanup_ops(ops);
 	spin_unlock(&net->rules_mod_lock);
 
-	synchronize_rcu();
-	release_net(net);
+	call_rcu(&ops->rcu, fib_rules_put_rcu);
 }
 
 EXPORT_SYMBOL_GPL(fib_rules_unregister);
@@ -135,7 +165,10 @@
 {
 	int ret = 0;
 
-	if (rule->ifindex && (rule->ifindex != fl->iif))
+	if (rule->iifindex && (rule->iifindex != fl->iif))
+		goto out;
+
+	if (rule->oifindex && (rule->oifindex != fl->oif))
 		goto out;
 
 	if ((rule->mark ^ fl->mark) & rule->mark_mask)
@@ -248,14 +281,24 @@
 	if (tb[FRA_PRIORITY])
 		rule->pref = nla_get_u32(tb[FRA_PRIORITY]);
 
-	if (tb[FRA_IFNAME]) {
+	if (tb[FRA_IIFNAME]) {
 		struct net_device *dev;
 
-		rule->ifindex = -1;
-		nla_strlcpy(rule->ifname, tb[FRA_IFNAME], IFNAMSIZ);
-		dev = __dev_get_by_name(net, rule->ifname);
+		rule->iifindex = -1;
+		nla_strlcpy(rule->iifname, tb[FRA_IIFNAME], IFNAMSIZ);
+		dev = __dev_get_by_name(net, rule->iifname);
 		if (dev)
-			rule->ifindex = dev->ifindex;
+			rule->iifindex = dev->ifindex;
+	}
+
+	if (tb[FRA_OIFNAME]) {
+		struct net_device *dev;
+
+		rule->oifindex = -1;
+		nla_strlcpy(rule->oifname, tb[FRA_OIFNAME], IFNAMSIZ);
+		dev = __dev_get_by_name(net, rule->oifname);
+		if (dev)
+			rule->oifindex = dev->ifindex;
 	}
 
 	if (tb[FRA_FWMARK]) {
@@ -274,7 +317,7 @@
 	rule->flags = frh->flags;
 	rule->table = frh_get_table(frh, tb);
 
-	if (!rule->pref && ops->default_pref)
+	if (!tb[FRA_PRIORITY] && ops->default_pref)
 		rule->pref = ops->default_pref(ops);
 
 	err = -EINVAL;
@@ -388,8 +431,12 @@
 		    (rule->pref != nla_get_u32(tb[FRA_PRIORITY])))
 			continue;
 
-		if (tb[FRA_IFNAME] &&
-		    nla_strcmp(tb[FRA_IFNAME], rule->ifname))
+		if (tb[FRA_IIFNAME] &&
+		    nla_strcmp(tb[FRA_IIFNAME], rule->iifname))
+			continue;
+
+		if (tb[FRA_OIFNAME] &&
+		    nla_strcmp(tb[FRA_OIFNAME], rule->oifname))
 			continue;
 
 		if (tb[FRA_FWMARK] &&
@@ -447,7 +494,8 @@
 					 struct fib_rule *rule)
 {
 	size_t payload = NLMSG_ALIGN(sizeof(struct fib_rule_hdr))
-			 + nla_total_size(IFNAMSIZ) /* FRA_IFNAME */
+			 + nla_total_size(IFNAMSIZ) /* FRA_IIFNAME */
+			 + nla_total_size(IFNAMSIZ) /* FRA_OIFNAME */
 			 + nla_total_size(4) /* FRA_PRIORITY */
 			 + nla_total_size(4) /* FRA_TABLE */
 			 + nla_total_size(4) /* FRA_FWMARK */
@@ -481,11 +529,18 @@
 	if (rule->action == FR_ACT_GOTO && rule->ctarget == NULL)
 		frh->flags |= FIB_RULE_UNRESOLVED;
 
-	if (rule->ifname[0]) {
-		NLA_PUT_STRING(skb, FRA_IFNAME, rule->ifname);
+	if (rule->iifname[0]) {
+		NLA_PUT_STRING(skb, FRA_IIFNAME, rule->iifname);
 
-		if (rule->ifindex == -1)
-			frh->flags |= FIB_RULE_DEV_DETACHED;
+		if (rule->iifindex == -1)
+			frh->flags |= FIB_RULE_IIF_DETACHED;
+	}
+
+	if (rule->oifname[0]) {
+		NLA_PUT_STRING(skb, FRA_OIFNAME, rule->oifname);
+
+		if (rule->oifindex == -1)
+			frh->flags |= FIB_RULE_OIF_DETACHED;
 	}
 
 	if (rule->pref)
@@ -600,9 +655,12 @@
 	struct fib_rule *rule;
 
 	list_for_each_entry(rule, rules, list) {
-		if (rule->ifindex == -1 &&
-		    strcmp(dev->name, rule->ifname) == 0)
-			rule->ifindex = dev->ifindex;
+		if (rule->iifindex == -1 &&
+		    strcmp(dev->name, rule->iifname) == 0)
+			rule->iifindex = dev->ifindex;
+		if (rule->oifindex == -1 &&
+		    strcmp(dev->name, rule->oifname) == 0)
+			rule->oifindex = dev->ifindex;
 	}
 }
 
@@ -610,9 +668,12 @@
 {
 	struct fib_rule *rule;
 
-	list_for_each_entry(rule, rules, list)
-		if (rule->ifindex == dev->ifindex)
-			rule->ifindex = -1;
+	list_for_each_entry(rule, rules, list) {
+		if (rule->iifindex == dev->ifindex)
+			rule->iifindex = -1;
+		if (rule->oifindex == dev->ifindex)
+			rule->oifindex = -1;
+	}
 }
 
 
diff --git a/net/core/filter.c b/net/core/filter.c
index d1d779c..08db7b9 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -303,6 +303,12 @@
 		case SKF_AD_IFINDEX:
 			A = skb->dev->ifindex;
 			continue;
+		case SKF_AD_MARK:
+			A = skb->mark;
+			continue;
+		case SKF_AD_QUEUE:
+			A = skb->queue_mapping;
+			continue;
 		case SKF_AD_NLATTR: {
 			struct nlattr *nla;
 
diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c
index 8569310..393b1d8 100644
--- a/net/core/gen_stats.c
+++ b/net/core/gen_stats.c
@@ -127,6 +127,7 @@
 /**
  * gnet_stats_copy_rate_est - copy rate estimator statistics into statistics TLV
  * @d: dumping handle
+ * @b: basic statistics
  * @r: rate estimator statistics
  *
  * Appends the rate estimator statistics to the top level TLV created by
@@ -136,8 +137,13 @@
  * if the room in the socket buffer was not sufficient.
  */
 int
-gnet_stats_copy_rate_est(struct gnet_dump *d, struct gnet_stats_rate_est *r)
+gnet_stats_copy_rate_est(struct gnet_dump *d,
+			 const struct gnet_stats_basic_packed *b,
+			 struct gnet_stats_rate_est *r)
 {
+	if (b && !gen_estimator_active(b, r))
+		return 0;
+
 	if (d->compat_tc_stats) {
 		d->tc_stats.bps = r->bps;
 		d->tc_stats.pps = r->pps;
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index bf8f7af..5910b55 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -35,7 +35,7 @@
 static void linkwatch_event(struct work_struct *dummy);
 static DECLARE_DELAYED_WORK(linkwatch_work, linkwatch_event);
 
-static struct net_device *lweventlist;
+static LIST_HEAD(lweventlist);
 static DEFINE_SPINLOCK(lweventlist_lock);
 
 static unsigned char default_operstate(const struct net_device *dev)
@@ -89,8 +89,10 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&lweventlist_lock, flags);
-	dev->link_watch_next = lweventlist;
-	lweventlist = dev;
+	if (list_empty(&dev->link_watch_list)) {
+		list_add_tail(&dev->link_watch_list, &lweventlist);
+		dev_hold(dev);
+	}
 	spin_unlock_irqrestore(&lweventlist_lock, flags);
 }
 
@@ -133,9 +135,35 @@
 }
 
 
+static void linkwatch_do_dev(struct net_device *dev)
+{
+	/*
+	 * Make sure the above read is complete since it can be
+	 * rewritten as soon as we clear the bit below.
+	 */
+	smp_mb__before_clear_bit();
+
+	/* We are about to handle this device,
+	 * so new events can be accepted
+	 */
+	clear_bit(__LINK_STATE_LINKWATCH_PENDING, &dev->state);
+
+	rfc2863_policy(dev);
+	if (dev->flags & IFF_UP) {
+		if (netif_carrier_ok(dev))
+			dev_activate(dev);
+		else
+			dev_deactivate(dev);
+
+		netdev_state_change(dev);
+	}
+	dev_put(dev);
+}
+
 static void __linkwatch_run_queue(int urgent_only)
 {
-	struct net_device *next;
+	struct net_device *dev;
+	LIST_HEAD(wrk);
 
 	/*
 	 * Limit the number of linkwatch events to one
@@ -153,46 +181,40 @@
 	clear_bit(LW_URGENT, &linkwatch_flags);
 
 	spin_lock_irq(&lweventlist_lock);
-	next = lweventlist;
-	lweventlist = NULL;
-	spin_unlock_irq(&lweventlist_lock);
+	list_splice_init(&lweventlist, &wrk);
 
-	while (next) {
-		struct net_device *dev = next;
+	while (!list_empty(&wrk)) {
 
-		next = dev->link_watch_next;
+		dev = list_first_entry(&wrk, struct net_device, link_watch_list);
+		list_del_init(&dev->link_watch_list);
 
 		if (urgent_only && !linkwatch_urgent_event(dev)) {
-			linkwatch_add_event(dev);
+			list_add_tail(&dev->link_watch_list, &lweventlist);
 			continue;
 		}
-
-		/*
-		 * Make sure the above read is complete since it can be
-		 * rewritten as soon as we clear the bit below.
-		 */
-		smp_mb__before_clear_bit();
-
-		/* We are about to handle this device,
-		 * so new events can be accepted
-		 */
-		clear_bit(__LINK_STATE_LINKWATCH_PENDING, &dev->state);
-
-		rfc2863_policy(dev);
-		if (dev->flags & IFF_UP) {
-			if (netif_carrier_ok(dev))
-				dev_activate(dev);
-			else
-				dev_deactivate(dev);
-
-			netdev_state_change(dev);
-		}
-
-		dev_put(dev);
+		spin_unlock_irq(&lweventlist_lock);
+		linkwatch_do_dev(dev);
+		spin_lock_irq(&lweventlist_lock);
 	}
 
-	if (lweventlist)
+	if (!list_empty(&lweventlist))
 		linkwatch_schedule_work(0);
+	spin_unlock_irq(&lweventlist_lock);
+}
+
+void linkwatch_forget_dev(struct net_device *dev)
+{
+	unsigned long flags;
+	int clean = 0;
+
+	spin_lock_irqsave(&lweventlist_lock, flags);
+	if (!list_empty(&dev->link_watch_list)) {
+		list_del_init(&dev->link_watch_list);
+		clean = 1;
+	}
+	spin_unlock_irqrestore(&lweventlist_lock, flags);
+	if (clean)
+		linkwatch_do_dev(dev);
 }
 
 
@@ -216,8 +238,6 @@
 	bool urgent = linkwatch_urgent_event(dev);
 
 	if (!test_and_set_bit(__LINK_STATE_LINKWATCH_PENDING, &dev->state)) {
-		dev_hold(dev);
-
 		linkwatch_add_event(dev);
 	} else if (!urgent)
 		return;
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index e587e68..f35377b 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -2092,7 +2092,7 @@
 		if (h > s_h)
 			s_idx = 0;
 		for (n = tbl->hash_buckets[h], idx = 0; n; n = n->next) {
-			if (dev_net(n->dev) != net)
+			if (!net_eq(dev_net(n->dev), net))
 				continue;
 			if (idx < s_idx)
 				goto next;
@@ -2566,21 +2566,18 @@
 } neigh_sysctl_template __read_mostly = {
 	.neigh_vars = {
 		{
-			.ctl_name	= NET_NEIGH_MCAST_SOLICIT,
 			.procname	= "mcast_solicit",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec,
 		},
 		{
-			.ctl_name	= NET_NEIGH_UCAST_SOLICIT,
 			.procname	= "ucast_solicit",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec,
 		},
 		{
-			.ctl_name	= NET_NEIGH_APP_SOLICIT,
 			.procname	= "app_solicit",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
@@ -2593,38 +2590,30 @@
 			.proc_handler	= proc_dointvec_userhz_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_REACHABLE_TIME,
 			.procname	= "base_reachable_time",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec_jiffies,
-			.strategy	= sysctl_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_DELAY_PROBE_TIME,
 			.procname	= "delay_first_probe_time",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec_jiffies,
-			.strategy	= sysctl_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_GC_STALE_TIME,
 			.procname	= "gc_stale_time",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec_jiffies,
-			.strategy	= sysctl_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_UNRES_QLEN,
 			.procname	= "unres_qlen",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec,
 		},
 		{
-			.ctl_name	= NET_NEIGH_PROXY_QLEN,
 			.procname	= "proxy_qlen",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
@@ -2649,45 +2638,36 @@
 			.proc_handler	= proc_dointvec_userhz_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_RETRANS_TIME_MS,
 			.procname	= "retrans_time_ms",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec_ms_jiffies,
-			.strategy	= sysctl_ms_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_REACHABLE_TIME_MS,
 			.procname	= "base_reachable_time_ms",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec_ms_jiffies,
-			.strategy	= sysctl_ms_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_GC_INTERVAL,
 			.procname	= "gc_interval",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec_jiffies,
-			.strategy	= sysctl_jiffies,
 		},
 		{
-			.ctl_name	= NET_NEIGH_GC_THRESH1,
 			.procname	= "gc_thresh1",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec,
 		},
 		{
-			.ctl_name	= NET_NEIGH_GC_THRESH2,
 			.procname	= "gc_thresh2",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
 			.proc_handler	= proc_dointvec,
 		},
 		{
-			.ctl_name	= NET_NEIGH_GC_THRESH3,
 			.procname	= "gc_thresh3",
 			.maxlen		= sizeof(int),
 			.mode		= 0644,
@@ -2699,7 +2679,7 @@
 
 int neigh_sysctl_register(struct net_device *dev, struct neigh_parms *p,
 			  int p_id, int pdev_id, char *p_name,
-			  proc_handler *handler, ctl_handler *strategy)
+			  proc_handler *handler)
 {
 	struct neigh_sysctl_table *t;
 	const char *dev_name_source = NULL;
@@ -2710,10 +2690,10 @@
 #define NEIGH_CTL_PATH_DEV	3
 
 	struct ctl_path neigh_path[] = {
-		{ .procname = "net",	 .ctl_name = CTL_NET, },
-		{ .procname = "proto",	 .ctl_name = 0, },
-		{ .procname = "neigh",	 .ctl_name = 0, },
-		{ .procname = "default", .ctl_name = NET_PROTO_CONF_DEFAULT, },
+		{ .procname = "net",	 },
+		{ .procname = "proto",	 },
+		{ .procname = "neigh",	 },
+		{ .procname = "default", },
 		{ },
 	};
 
@@ -2738,7 +2718,6 @@
 
 	if (dev) {
 		dev_name_source = dev->name;
-		neigh_path[NEIGH_CTL_PATH_DEV].ctl_name = dev->ifindex;
 		/* Terminate the table early */
 		memset(&t->neigh_vars[14], 0, sizeof(t->neigh_vars[14]));
 	} else {
@@ -2750,31 +2729,19 @@
 	}
 
 
-	if (handler || strategy) {
+	if (handler) {
 		/* RetransTime */
 		t->neigh_vars[3].proc_handler = handler;
-		t->neigh_vars[3].strategy = strategy;
 		t->neigh_vars[3].extra1 = dev;
-		if (!strategy)
-			t->neigh_vars[3].ctl_name = CTL_UNNUMBERED;
 		/* ReachableTime */
 		t->neigh_vars[4].proc_handler = handler;
-		t->neigh_vars[4].strategy = strategy;
 		t->neigh_vars[4].extra1 = dev;
-		if (!strategy)
-			t->neigh_vars[4].ctl_name = CTL_UNNUMBERED;
 		/* RetransTime (in milliseconds)*/
 		t->neigh_vars[12].proc_handler = handler;
-		t->neigh_vars[12].strategy = strategy;
 		t->neigh_vars[12].extra1 = dev;
-		if (!strategy)
-			t->neigh_vars[12].ctl_name = CTL_UNNUMBERED;
 		/* ReachableTime (in milliseconds) */
 		t->neigh_vars[13].proc_handler = handler;
-		t->neigh_vars[13].strategy = strategy;
 		t->neigh_vars[13].extra1 = dev;
-		if (!strategy)
-			t->neigh_vars[13].ctl_name = CTL_UNNUMBERED;
 	}
 
 	t->dev_name = kstrdup(dev_name_source, GFP_KERNEL);
@@ -2782,9 +2749,7 @@
 		goto free;
 
 	neigh_path[NEIGH_CTL_PATH_DEV].procname = t->dev_name;
-	neigh_path[NEIGH_CTL_PATH_NEIGH].ctl_name = pdev_id;
 	neigh_path[NEIGH_CTL_PATH_PROTO].procname = p_name;
-	neigh_path[NEIGH_CTL_PATH_PROTO].ctl_name = p_id;
 
 	t->sysctl_header =
 		register_net_sysctl_table(neigh_parms_net(p), neigh_path, t->neigh_vars);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 427ded8..fbc1c74 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -130,6 +130,48 @@
 	return -EINVAL;
 }
 
+static ssize_t show_speed(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	int ret = -EINVAL;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (netif_running(netdev) &&
+	    netdev->ethtool_ops &&
+	    netdev->ethtool_ops->get_settings) {
+		struct ethtool_cmd cmd = { ETHTOOL_GSET };
+
+		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
+			ret = sprintf(buf, fmt_dec, ethtool_cmd_speed(&cmd));
+	}
+	rtnl_unlock();
+	return ret;
+}
+
+static ssize_t show_duplex(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	int ret = -EINVAL;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (netif_running(netdev) &&
+	    netdev->ethtool_ops &&
+	    netdev->ethtool_ops->get_settings) {
+		struct ethtool_cmd cmd = { ETHTOOL_GSET };
+
+		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
+			ret = sprintf(buf, "%s\n", cmd.duplex ? "full" : "half");
+	}
+	rtnl_unlock();
+	return ret;
+}
+
 static ssize_t show_dormant(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
@@ -259,6 +301,8 @@
 	__ATTR(address, S_IRUGO, show_address, NULL),
 	__ATTR(broadcast, S_IRUGO, show_broadcast, NULL),
 	__ATTR(carrier, S_IRUGO, show_carrier, NULL),
+	__ATTR(speed, S_IRUGO, show_speed, NULL),
+	__ATTR(duplex, S_IRUGO, show_duplex, NULL),
 	__ATTR(dormant, S_IRUGO, show_dormant, NULL),
 	__ATTR(operstate, S_IRUGO, show_operstate, NULL),
 	__ATTR(mtu, S_IRUGO | S_IWUSR, show_mtu, store_mtu),
@@ -481,7 +525,7 @@
 
 	kobject_get(&dev->kobj);
 
-	if (dev_net(net) != &init_net)
+	if (!net_eq(dev_net(net), &init_net))
 		return;
 
 	device_del(dev);
@@ -500,15 +544,22 @@
 	dev_set_name(dev, "%s", net->name);
 
 #ifdef CONFIG_SYSFS
-	*groups++ = &netstat_group;
+	/* Allow for a device specific group */
+	if (*groups)
+		groups++;
 
+	*groups++ = &netstat_group;
 #ifdef CONFIG_WIRELESS_EXT_SYSFS
-	if (net->wireless_handlers || net->ieee80211_ptr)
+	if (net->ieee80211_ptr)
 		*groups++ = &wireless_group;
+#ifdef CONFIG_WIRELESS_EXT
+	else if (net->wireless_handlers)
+		*groups++ = &wireless_group;
+#endif
 #endif
 #endif /* CONFIG_SYSFS */
 
-	if (dev_net(net) != &init_net)
+	if (!net_eq(dev_net(net), &init_net))
 		return 0;
 
 	return device_add(dev);
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 1c1af27..bd8c471 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -27,14 +27,64 @@
 
 #define INITIAL_NET_GEN_PTRS	13 /* +1 for len +2 for rcu_head */
 
+static int ops_init(const struct pernet_operations *ops, struct net *net)
+{
+	int err;
+	if (ops->id && ops->size) {
+		void *data = kzalloc(ops->size, GFP_KERNEL);
+		if (!data)
+			return -ENOMEM;
+
+		err = net_assign_generic(net, *ops->id, data);
+		if (err) {
+			kfree(data);
+			return err;
+		}
+	}
+	if (ops->init)
+		return ops->init(net);
+	return 0;
+}
+
+static void ops_free(const struct pernet_operations *ops, struct net *net)
+{
+	if (ops->id && ops->size) {
+		int id = *ops->id;
+		kfree(net_generic(net, id));
+	}
+}
+
+static void ops_exit_list(const struct pernet_operations *ops,
+			  struct list_head *net_exit_list)
+{
+	struct net *net;
+	if (ops->exit) {
+		list_for_each_entry(net, net_exit_list, exit_list)
+			ops->exit(net);
+	}
+	if (ops->exit_batch)
+		ops->exit_batch(net_exit_list);
+}
+
+static void ops_free_list(const struct pernet_operations *ops,
+			  struct list_head *net_exit_list)
+{
+	struct net *net;
+	if (ops->size && ops->id) {
+		list_for_each_entry(net, net_exit_list, exit_list)
+			ops_free(ops, net);
+	}
+}
+
 /*
  * setup_net runs the initializers for the network namespace object.
  */
 static __net_init int setup_net(struct net *net)
 {
 	/* Must be called with net_mutex held */
-	struct pernet_operations *ops;
+	const struct pernet_operations *ops, *saved_ops;
 	int error = 0;
+	LIST_HEAD(net_exit_list);
 
 	atomic_set(&net->count, 1);
 
@@ -43,11 +93,9 @@
 #endif
 
 	list_for_each_entry(ops, &pernet_list, list) {
-		if (ops->init) {
-			error = ops->init(net);
-			if (error < 0)
-				goto out_undo;
-		}
+		error = ops_init(ops, net);
+		if (error < 0)
+			goto out_undo;
 	}
 out:
 	return error;
@@ -56,10 +104,14 @@
 	/* Walk through the list backwards calling the exit functions
 	 * for the pernet modules whose init functions did not fail.
 	 */
-	list_for_each_entry_continue_reverse(ops, &pernet_list, list) {
-		if (ops->exit)
-			ops->exit(net);
-	}
+	list_add(&net->exit_list, &net_exit_list);
+	saved_ops = ops;
+	list_for_each_entry_continue_reverse(ops, &pernet_list, list)
+		ops_exit_list(ops, &net_exit_list);
+
+	ops = saved_ops;
+	list_for_each_entry_continue_reverse(ops, &pernet_list, list)
+		ops_free_list(ops, &net_exit_list);
 
 	rcu_barrier();
 	goto out;
@@ -147,18 +199,29 @@
 	return net_create();
 }
 
+static DEFINE_SPINLOCK(cleanup_list_lock);
+static LIST_HEAD(cleanup_list);  /* Must hold cleanup_list_lock to touch */
+
 static void cleanup_net(struct work_struct *work)
 {
-	struct pernet_operations *ops;
-	struct net *net;
+	const struct pernet_operations *ops;
+	struct net *net, *tmp;
+	LIST_HEAD(net_kill_list);
+	LIST_HEAD(net_exit_list);
 
-	net = container_of(work, struct net, work);
+	/* Atomically snapshot the list of namespaces to cleanup */
+	spin_lock_irq(&cleanup_list_lock);
+	list_replace_init(&cleanup_list, &net_kill_list);
+	spin_unlock_irq(&cleanup_list_lock);
 
 	mutex_lock(&net_mutex);
 
 	/* Don't let anyone else find us. */
 	rtnl_lock();
-	list_del_rcu(&net->list);
+	list_for_each_entry(net, &net_kill_list, cleanup_list) {
+		list_del_rcu(&net->list);
+		list_add_tail(&net->exit_list, &net_exit_list);
+	}
 	rtnl_unlock();
 
 	/*
@@ -169,10 +232,12 @@
 	synchronize_rcu();
 
 	/* Run all of the network namespace exit methods */
-	list_for_each_entry_reverse(ops, &pernet_list, list) {
-		if (ops->exit)
-			ops->exit(net);
-	}
+	list_for_each_entry_reverse(ops, &pernet_list, list)
+		ops_exit_list(ops, &net_exit_list);
+
+	/* Free the net generic variables */
+	list_for_each_entry_reverse(ops, &pernet_list, list)
+		ops_free_list(ops, &net_exit_list);
 
 	mutex_unlock(&net_mutex);
 
@@ -182,14 +247,23 @@
 	rcu_barrier();
 
 	/* Finally it is safe to free my network namespace structure */
-	net_free(net);
+	list_for_each_entry_safe(net, tmp, &net_exit_list, exit_list) {
+		list_del_init(&net->exit_list);
+		net_free(net);
+	}
 }
+static DECLARE_WORK(net_cleanup_work, cleanup_net);
 
 void __put_net(struct net *net)
 {
 	/* Cleanup the network namespace in process context */
-	INIT_WORK(&net->work, cleanup_net);
-	queue_work(netns_wq, &net->work);
+	unsigned long flags;
+
+	spin_lock_irqsave(&cleanup_list_lock, flags);
+	list_add(&net->cleanup_list, &cleanup_list);
+	spin_unlock_irqrestore(&cleanup_list_lock, flags);
+
+	queue_work(netns_wq, &net_cleanup_work);
 }
 EXPORT_SYMBOL_GPL(__put_net);
 
@@ -259,18 +333,20 @@
 pure_initcall(net_ns_init);
 
 #ifdef CONFIG_NET_NS
-static int register_pernet_operations(struct list_head *list,
-				      struct pernet_operations *ops)
+static int __register_pernet_operations(struct list_head *list,
+					struct pernet_operations *ops)
 {
-	struct net *net, *undo_net;
+	struct net *net;
 	int error;
+	LIST_HEAD(net_exit_list);
 
 	list_add_tail(&ops->list, list);
-	if (ops->init) {
+	if (ops->init || (ops->id && ops->size)) {
 		for_each_net(net) {
-			error = ops->init(net);
+			error = ops_init(ops, net);
 			if (error)
 				goto out_undo;
+			list_add_tail(&net->exit_list, &net_exit_list);
 		}
 	}
 	return 0;
@@ -278,46 +354,83 @@
 out_undo:
 	/* If I have an error cleanup all namespaces I initialized */
 	list_del(&ops->list);
-	if (ops->exit) {
-		for_each_net(undo_net) {
-			if (undo_net == net)
-				goto undone;
-			ops->exit(undo_net);
+	ops_exit_list(ops, &net_exit_list);
+	ops_free_list(ops, &net_exit_list);
+	return error;
+}
+
+static void __unregister_pernet_operations(struct pernet_operations *ops)
+{
+	struct net *net;
+	LIST_HEAD(net_exit_list);
+
+	list_del(&ops->list);
+	for_each_net(net)
+		list_add_tail(&net->exit_list, &net_exit_list);
+	ops_exit_list(ops, &net_exit_list);
+	ops_free_list(ops, &net_exit_list);
+}
+
+#else
+
+static int __register_pernet_operations(struct list_head *list,
+					struct pernet_operations *ops)
+{
+	int err = 0;
+	err = ops_init(ops, &init_net);
+	if (err)
+		ops_free(ops, &init_net);
+	return err;
+	
+}
+
+static void __unregister_pernet_operations(struct pernet_operations *ops)
+{
+	LIST_HEAD(net_exit_list);
+	list_add(&init_net.exit_list, &net_exit_list);
+	ops_exit_list(ops, &net_exit_list);
+	ops_free_list(ops, &net_exit_list);
+}
+
+#endif /* CONFIG_NET_NS */
+
+static DEFINE_IDA(net_generic_ids);
+
+static int register_pernet_operations(struct list_head *list,
+				      struct pernet_operations *ops)
+{
+	int error;
+
+	if (ops->id) {
+again:
+		error = ida_get_new_above(&net_generic_ids, 1, ops->id);
+		if (error < 0) {
+			if (error == -EAGAIN) {
+				ida_pre_get(&net_generic_ids, GFP_KERNEL);
+				goto again;
+			}
+			return error;
 		}
 	}
-undone:
+	error = __register_pernet_operations(list, ops);
+	if (error) {
+		rcu_barrier();
+		if (ops->id)
+			ida_remove(&net_generic_ids, *ops->id);
+	}
+
 	return error;
 }
 
 static void unregister_pernet_operations(struct pernet_operations *ops)
 {
-	struct net *net;
-
-	list_del(&ops->list);
-	if (ops->exit)
-		for_each_net(net)
-			ops->exit(net);
+	
+	__unregister_pernet_operations(ops);
+	rcu_barrier();
+	if (ops->id)
+		ida_remove(&net_generic_ids, *ops->id);
 }
 
-#else
-
-static int register_pernet_operations(struct list_head *list,
-				      struct pernet_operations *ops)
-{
-	if (ops->init == NULL)
-		return 0;
-	return ops->init(&init_net);
-}
-
-static void unregister_pernet_operations(struct pernet_operations *ops)
-{
-	if (ops->exit)
-		ops->exit(&init_net);
-}
-#endif
-
-static DEFINE_IDA(net_generic_ids);
-
 /**
  *      register_pernet_subsys - register a network namespace subsystem
  *	@ops:  pernet operations structure for the subsystem
@@ -364,38 +477,6 @@
 }
 EXPORT_SYMBOL_GPL(unregister_pernet_subsys);
 
-int register_pernet_gen_subsys(int *id, struct pernet_operations *ops)
-{
-	int rv;
-
-	mutex_lock(&net_mutex);
-again:
-	rv = ida_get_new_above(&net_generic_ids, 1, id);
-	if (rv < 0) {
-		if (rv == -EAGAIN) {
-			ida_pre_get(&net_generic_ids, GFP_KERNEL);
-			goto again;
-		}
-		goto out;
-	}
-	rv = register_pernet_operations(first_device, ops);
-	if (rv < 0)
-		ida_remove(&net_generic_ids, *id);
-out:
-	mutex_unlock(&net_mutex);
-	return rv;
-}
-EXPORT_SYMBOL_GPL(register_pernet_gen_subsys);
-
-void unregister_pernet_gen_subsys(int id, struct pernet_operations *ops)
-{
-	mutex_lock(&net_mutex);
-	unregister_pernet_operations(ops);
-	ida_remove(&net_generic_ids, id);
-	mutex_unlock(&net_mutex);
-}
-EXPORT_SYMBOL_GPL(unregister_pernet_gen_subsys);
-
 /**
  *      register_pernet_device - register a network namespace device
  *	@ops:  pernet operations structure for the subsystem
@@ -427,30 +508,6 @@
 }
 EXPORT_SYMBOL_GPL(register_pernet_device);
 
-int register_pernet_gen_device(int *id, struct pernet_operations *ops)
-{
-	int error;
-	mutex_lock(&net_mutex);
-again:
-	error = ida_get_new_above(&net_generic_ids, 1, id);
-	if (error) {
-		if (error == -EAGAIN) {
-			ida_pre_get(&net_generic_ids, GFP_KERNEL);
-			goto again;
-		}
-		goto out;
-	}
-	error = register_pernet_operations(&pernet_list, ops);
-	if (error)
-		ida_remove(&net_generic_ids, *id);
-	else if (first_device == &pernet_list)
-		first_device = &ops->list;
-out:
-	mutex_unlock(&net_mutex);
-	return error;
-}
-EXPORT_SYMBOL_GPL(register_pernet_gen_device);
-
 /**
  *      unregister_pernet_device - unregister a network namespace netdevice
  *	@ops: pernet operations structure to manipulate
@@ -470,17 +527,6 @@
 }
 EXPORT_SYMBOL_GPL(unregister_pernet_device);
 
-void unregister_pernet_gen_device(int id, struct pernet_operations *ops)
-{
-	mutex_lock(&net_mutex);
-	if (&ops->list == first_device)
-		first_device = first_device->next;
-	unregister_pernet_operations(ops);
-	ida_remove(&net_generic_ids, id);
-	mutex_unlock(&net_mutex);
-}
-EXPORT_SYMBOL_GPL(unregister_pernet_gen_device);
-
 static void net_generic_release(struct rcu_head *rcu)
 {
 	struct net_generic *ng;
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 6eb8d47..a23b45f 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -340,6 +340,7 @@
 	__u16 cur_udp_src;
 	__u16 cur_queue_map;
 	__u32 cur_pkt_size;
+	__u32 last_pkt_size;
 
 	__u8 hh[14];
 	/* = {
@@ -363,6 +364,7 @@
 				  * device name (not when the inject is
 				  * started as it used to do.)
 				  */
+	char odevname[32];
 	struct flow_state *flows;
 	unsigned cflows;	/* Concurrent flows (config) */
 	unsigned lflow;		/* Flow length  (config) */
@@ -426,7 +428,7 @@
 static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *i);
 static int pktgen_add_device(struct pktgen_thread *t, const char *ifname);
 static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t,
-					  const char *ifname);
+					  const char *ifname, bool exact);
 static int pktgen_device_event(struct notifier_block *, unsigned long, void *);
 static void pktgen_run_all_threads(void);
 static void pktgen_reset_all_threads(void);
@@ -528,7 +530,7 @@
 	seq_printf(seq,
 		   "     frags: %d  delay: %llu  clone_skb: %d  ifname: %s\n",
 		   pkt_dev->nfrags, (unsigned long long) pkt_dev->delay,
-		   pkt_dev->clone_skb, pkt_dev->odev->name);
+		   pkt_dev->clone_skb, pkt_dev->odevname);
 
 	seq_printf(seq, "     flows: %u flowlen: %u\n", pkt_dev->cflows,
 		   pkt_dev->lflow);
@@ -1688,13 +1690,13 @@
 	if_lock(t);
 	list_for_each_entry(pkt_dev, &t->if_list, list)
 		if (pkt_dev->running)
-			seq_printf(seq, "%s ", pkt_dev->odev->name);
+			seq_printf(seq, "%s ", pkt_dev->odevname);
 
 	seq_printf(seq, "\nStopped: ");
 
 	list_for_each_entry(pkt_dev, &t->if_list, list)
 		if (!pkt_dev->running)
-			seq_printf(seq, "%s ", pkt_dev->odev->name);
+			seq_printf(seq, "%s ", pkt_dev->odevname);
 
 	if (t->result[0])
 		seq_printf(seq, "\nResult: %s\n", t->result);
@@ -1817,9 +1819,10 @@
 {
 	struct pktgen_thread *t;
 	struct pktgen_dev *pkt_dev = NULL;
+	bool exact = (remove == FIND);
 
 	list_for_each_entry(t, &pktgen_threads, th_list) {
-		pkt_dev = pktgen_find_dev(t, ifname);
+		pkt_dev = pktgen_find_dev(t, ifname, exact);
 		if (pkt_dev) {
 			if (remove) {
 				if_lock(t);
@@ -1994,7 +1997,7 @@
 		       "queue_map_min (zero-based) (%d) exceeds valid range "
 		       "[0 - %d] for (%d) queues on %s, resetting\n",
 		       pkt_dev->queue_map_min, (ntxq ?: 1) - 1, ntxq,
-		       pkt_dev->odev->name);
+		       pkt_dev->odevname);
 		pkt_dev->queue_map_min = ntxq - 1;
 	}
 	if (pkt_dev->queue_map_max >= ntxq) {
@@ -2002,7 +2005,7 @@
 		       "queue_map_max (zero-based) (%d) exceeds valid range "
 		       "[0 - %d] for (%d) queues on %s, resetting\n",
 		       pkt_dev->queue_map_max, (ntxq ?: 1) - 1, ntxq,
-		       pkt_dev->odev->name);
+		       pkt_dev->odevname);
 		pkt_dev->queue_map_max = ntxq - 1;
 	}
 
@@ -2049,9 +2052,8 @@
 				read_lock_bh(&idev->lock);
 				for (ifp = idev->addr_list; ifp;
 				     ifp = ifp->if_next) {
-					if (ifp->scope == IFA_LINK
-					    && !(ifp->
-						 flags & IFA_F_TENTATIVE)) {
+					if (ifp->scope == IFA_LINK &&
+					    !(ifp->flags & IFA_F_TENTATIVE)) {
 						ipv6_addr_copy(&pkt_dev->
 							       cur_in6_saddr,
 							       &ifp->addr);
@@ -3262,7 +3264,7 @@
 
 	if (!pkt_dev->running) {
 		printk(KERN_WARNING "pktgen: interface: %s is already "
-		       "stopped\n", pkt_dev->odev->name);
+		       "stopped\n", pkt_dev->odevname);
 		return -EINVAL;
 	}
 
@@ -3434,7 +3436,7 @@
 			pkt_dev->clone_count--;	/* back out increment, OOM */
 			return;
 		}
-
+		pkt_dev->last_pkt_size = pkt_dev->skb->len;
 		pkt_dev->allocated_skbs++;
 		pkt_dev->clone_count = 0;	/* reset counter */
 	}
@@ -3446,12 +3448,14 @@
 	txq = netdev_get_tx_queue(odev, queue_map);
 
 	__netif_tx_lock_bh(txq);
-	atomic_inc(&(pkt_dev->skb->users));
 
-	if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
+	if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq))) {
 		ret = NETDEV_TX_BUSY;
-	else
-		ret = (*xmit)(pkt_dev->skb, odev);
+		pkt_dev->last_ok = 0;
+		goto unlock;
+	}
+	atomic_inc(&(pkt_dev->skb->users));
+	ret = (*xmit)(pkt_dev->skb, odev);
 
 	switch (ret) {
 	case NETDEV_TX_OK:
@@ -3459,12 +3463,12 @@
 		pkt_dev->last_ok = 1;
 		pkt_dev->sofar++;
 		pkt_dev->seq_num++;
-		pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
+		pkt_dev->tx_bytes += pkt_dev->last_pkt_size;
 		break;
 	default: /* Drivers are not supposed to return other values! */
 		if (net_ratelimit())
 			pr_info("pktgen: %s xmit error: %d\n",
-				odev->name, ret);
+				pkt_dev->odevname, ret);
 		pkt_dev->errors++;
 		/* fallthru */
 	case NETDEV_TX_LOCKED:
@@ -3473,6 +3477,7 @@
 		atomic_dec(&(pkt_dev->skb->users));
 		pkt_dev->last_ok = 0;
 	}
+unlock:
 	__netif_tx_unlock_bh(txq);
 
 	/* If pkt_dev->count is zero, then run forever */
@@ -3566,13 +3571,18 @@
 }
 
 static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t,
-					  const char *ifname)
+					  const char *ifname, bool exact)
 {
 	struct pktgen_dev *p, *pkt_dev = NULL;
-	if_lock(t);
+	size_t len = strlen(ifname);
 
+	if_lock(t);
 	list_for_each_entry(p, &t->if_list, list)
-		if (strncmp(p->odev->name, ifname, IFNAMSIZ) == 0) {
+		if (strncmp(p->odevname, ifname, len) == 0) {
+			if (p->odevname[len]) {
+				if (exact || p->odevname[len] != '@')
+					continue;
+			}
 			pkt_dev = p;
 			break;
 		}
@@ -3615,6 +3625,7 @@
 {
 	struct pktgen_dev *pkt_dev;
 	int err;
+	int node = cpu_to_node(t->cpu);
 
 	/* We don't allow a device to be on several threads */
 
@@ -3624,11 +3635,13 @@
 		return -EBUSY;
 	}
 
-	pkt_dev = kzalloc(sizeof(struct pktgen_dev), GFP_KERNEL);
+	pkt_dev = kzalloc_node(sizeof(struct pktgen_dev), GFP_KERNEL, node);
 	if (!pkt_dev)
 		return -ENOMEM;
 
-	pkt_dev->flows = vmalloc(MAX_CFLOWS * sizeof(struct flow_state));
+	strcpy(pkt_dev->odevname, ifname);
+	pkt_dev->flows = vmalloc_node(MAX_CFLOWS * sizeof(struct flow_state),
+				      node);
 	if (pkt_dev->flows == NULL) {
 		kfree(pkt_dev);
 		return -ENOMEM;
@@ -3690,7 +3703,8 @@
 	struct proc_dir_entry *pe;
 	struct task_struct *p;
 
-	t = kzalloc(sizeof(struct pktgen_thread), GFP_KERNEL);
+	t = kzalloc_node(sizeof(struct pktgen_thread), GFP_KERNEL,
+			 cpu_to_node(cpu));
 	if (!t) {
 		printk(KERN_ERR "pktgen: ERROR: out of memory, can't "
 		       "create new thread.\n");
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index eb42873..33148a5 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -38,7 +38,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/system.h>
-#include <asm/string.h>
 
 #include <linux/inet.h>
 #include <linux/netdevice.h>
@@ -53,8 +52,7 @@
 #include <net/rtnetlink.h>
 #include <net/net_namespace.h>
 
-struct rtnl_link
-{
+struct rtnl_link {
 	rtnl_doit_func		doit;
 	rtnl_dumpit_func	dumpit;
 };
@@ -65,6 +63,7 @@
 {
 	mutex_lock(&rtnl_mutex);
 }
+EXPORT_SYMBOL(rtnl_lock);
 
 void __rtnl_unlock(void)
 {
@@ -76,16 +75,19 @@
 	/* This fellow will unlock it for us. */
 	netdev_run_todo();
 }
+EXPORT_SYMBOL(rtnl_unlock);
 
 int rtnl_trylock(void)
 {
 	return mutex_trylock(&rtnl_mutex);
 }
+EXPORT_SYMBOL(rtnl_trylock);
 
 int rtnl_is_locked(void)
 {
 	return mutex_is_locked(&rtnl_mutex);
 }
+EXPORT_SYMBOL(rtnl_is_locked);
 
 static struct rtnl_link *rtnl_msg_handlers[NPROTO];
 
@@ -168,7 +170,6 @@
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(__rtnl_register);
 
 /**
@@ -188,7 +189,6 @@
 		      "protocol = %d, message type = %d\n",
 		      protocol, msgtype);
 }
-
 EXPORT_SYMBOL_GPL(rtnl_register);
 
 /**
@@ -213,7 +213,6 @@
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(rtnl_unregister);
 
 /**
@@ -230,7 +229,6 @@
 	kfree(rtnl_msg_handlers[protocol]);
 	rtnl_msg_handlers[protocol] = NULL;
 }
-
 EXPORT_SYMBOL_GPL(rtnl_unregister_all);
 
 static LIST_HEAD(link_ops);
@@ -248,12 +246,11 @@
 int __rtnl_link_register(struct rtnl_link_ops *ops)
 {
 	if (!ops->dellink)
-		ops->dellink = unregister_netdevice;
+		ops->dellink = unregister_netdevice_queue;
 
 	list_add_tail(&ops->list, &link_ops);
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(__rtnl_link_register);
 
 /**
@@ -271,19 +268,18 @@
 	rtnl_unlock();
 	return err;
 }
-
 EXPORT_SYMBOL_GPL(rtnl_link_register);
 
 static void __rtnl_kill_links(struct net *net, struct rtnl_link_ops *ops)
 {
 	struct net_device *dev;
-restart:
+	LIST_HEAD(list_kill);
+
 	for_each_netdev(net, dev) {
-		if (dev->rtnl_link_ops == ops) {
-			ops->dellink(dev);
-			goto restart;
-		}
+		if (dev->rtnl_link_ops == ops)
+			ops->dellink(dev, &list_kill);
 	}
+	unregister_netdevice_many(&list_kill);
 }
 
 void rtnl_kill_links(struct net *net, struct rtnl_link_ops *ops)
@@ -309,7 +305,6 @@
 	}
 	list_del(&ops->list);
 }
-
 EXPORT_SYMBOL_GPL(__rtnl_link_unregister);
 
 /**
@@ -322,7 +317,6 @@
 	__rtnl_link_unregister(ops);
 	rtnl_unlock();
 }
-
 EXPORT_SYMBOL_GPL(rtnl_link_unregister);
 
 static const struct rtnl_link_ops *rtnl_link_ops_get(const char *kind)
@@ -427,12 +421,13 @@
 	struct rtattr *rta;
 	int size = RTA_LENGTH(attrlen);
 
-	rta = (struct rtattr*)skb_put(skb, RTA_ALIGN(size));
+	rta = (struct rtattr *)skb_put(skb, RTA_ALIGN(size));
 	rta->rta_type = attrtype;
 	rta->rta_len = size;
 	memcpy(RTA_DATA(rta), data, attrlen);
 	memset(RTA_DATA(rta) + attrlen, 0, RTA_ALIGN(size) - size);
 }
+EXPORT_SYMBOL(__rta_fill);
 
 int rtnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigned group, int echo)
 {
@@ -454,6 +449,7 @@
 
 	return nlmsg_unicast(rtnl, skb, pid);
 }
+EXPORT_SYMBOL(rtnl_unicast);
 
 void rtnl_notify(struct sk_buff *skb, struct net *net, u32 pid, u32 group,
 		 struct nlmsghdr *nlh, gfp_t flags)
@@ -466,6 +462,7 @@
 
 	nlmsg_notify(rtnl, skb, pid, group, report, flags);
 }
+EXPORT_SYMBOL(rtnl_notify);
 
 void rtnl_set_sk_err(struct net *net, u32 group, int error)
 {
@@ -473,6 +470,7 @@
 
 	netlink_set_err(rtnl, 0, group, error);
 }
+EXPORT_SYMBOL(rtnl_set_sk_err);
 
 int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics)
 {
@@ -501,6 +499,7 @@
 	nla_nest_cancel(skb, mx);
 	return -EMSGSIZE;
 }
+EXPORT_SYMBOL(rtnetlink_put_metrics);
 
 int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id,
 		       u32 ts, u32 tsage, long expires, u32 error)
@@ -520,14 +519,13 @@
 
 	return nla_put(skb, RTA_CACHEINFO, sizeof(ci), &ci);
 }
-
 EXPORT_SYMBOL_GPL(rtnl_put_cacheinfo);
 
 static void set_operstate(struct net_device *dev, unsigned char transition)
 {
 	unsigned char operstate = dev->operstate;
 
-	switch(transition) {
+	switch (transition) {
 	case IF_OPER_UP:
 		if ((operstate == IF_OPER_DORMANT ||
 		     operstate == IF_OPER_UNKNOWN) &&
@@ -682,22 +680,33 @@
 static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(skb->sk);
-	int idx;
-	int s_idx = cb->args[0];
+	int h, s_h;
+	int idx = 0, s_idx;
 	struct net_device *dev;
+	struct hlist_head *head;
+	struct hlist_node *node;
 
-	idx = 0;
-	for_each_netdev(net, dev) {
-		if (idx < s_idx)
-			goto cont;
-		if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
-				     NETLINK_CB(cb->skb).pid,
-				     cb->nlh->nlmsg_seq, 0, NLM_F_MULTI) <= 0)
-			break;
+	s_h = cb->args[0];
+	s_idx = cb->args[1];
+
+	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
+		idx = 0;
+		head = &net->dev_index_head[h];
+		hlist_for_each_entry(dev, node, head, index_hlist) {
+			if (idx < s_idx)
+				goto cont;
+			if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
+					     NETLINK_CB(cb->skb).pid,
+					     cb->nlh->nlmsg_seq, 0,
+					     NLM_F_MULTI) <= 0)
+				goto out;
 cont:
-		idx++;
+			idx++;
+		}
 	}
-	cb->args[0] = idx;
+out:
+	cb->args[1] = idx;
+	cb->args[0] = h;
 
 	return skb->len;
 }
@@ -717,12 +726,27 @@
 	[IFLA_NET_NS_PID]	= { .type = NLA_U32 },
 	[IFLA_IFALIAS]	        = { .type = NLA_STRING, .len = IFALIASZ-1 },
 };
+EXPORT_SYMBOL(ifla_policy);
 
 static const struct nla_policy ifla_info_policy[IFLA_INFO_MAX+1] = {
 	[IFLA_INFO_KIND]	= { .type = NLA_STRING },
 	[IFLA_INFO_DATA]	= { .type = NLA_NESTED },
 };
 
+struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[])
+{
+	struct net *net;
+	/* Examine the link attributes and figure out which
+	 * network namespace we are talking about.
+	 */
+	if (tb[IFLA_NET_NS_PID])
+		net = get_net_ns_by_pid(nla_get_u32(tb[IFLA_NET_NS_PID]));
+	else
+		net = get_net(src_net);
+	return net;
+}
+EXPORT_SYMBOL(rtnl_link_get_net);
+
 static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[])
 {
 	if (dev) {
@@ -746,8 +770,7 @@
 	int err;
 
 	if (tb[IFLA_NET_NS_PID]) {
-		struct net *net;
-		net = get_net_ns_by_pid(nla_get_u32(tb[IFLA_NET_NS_PID]));
+		struct net *net = rtnl_link_get_net(dev_net(dev), tb);
 		if (IS_ERR(net)) {
 			err = PTR_ERR(net);
 			goto errout;
@@ -910,9 +933,9 @@
 	err = -EINVAL;
 	ifm = nlmsg_data(nlh);
 	if (ifm->ifi_index > 0)
-		dev = dev_get_by_index(net, ifm->ifi_index);
+		dev = __dev_get_by_index(net, ifm->ifi_index);
 	else if (tb[IFLA_IFNAME])
-		dev = dev_get_by_name(net, ifname);
+		dev = __dev_get_by_name(net, ifname);
 	else
 		goto errout;
 
@@ -921,12 +944,11 @@
 		goto errout;
 	}
 
-	if ((err = validate_linkmsg(dev, tb)) < 0)
-		goto errout_dev;
+	err = validate_linkmsg(dev, tb);
+	if (err < 0)
+		goto errout;
 
 	err = do_setlink(dev, ifm, tb, ifname, 0);
-errout_dev:
-	dev_put(dev);
 errout:
 	return err;
 }
@@ -963,12 +985,12 @@
 	if (!ops)
 		return -EOPNOTSUPP;
 
-	ops->dellink(dev);
+	ops->dellink(dev, NULL);
 	return 0;
 }
 
-struct net_device *rtnl_create_link(struct net *net, char *ifname,
-		const struct rtnl_link_ops *ops, struct nlattr *tb[])
+struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
+	char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[])
 {
 	int err;
 	struct net_device *dev;
@@ -976,7 +998,8 @@
 	unsigned int real_num_queues = 1;
 
 	if (ops->get_tx_queues) {
-		err = ops->get_tx_queues(net, tb, &num_queues, &real_num_queues);
+		err = ops->get_tx_queues(src_net, tb, &num_queues,
+					 &real_num_queues);
 		if (err)
 			goto err;
 	}
@@ -985,16 +1008,16 @@
 	if (!dev)
 		goto err;
 
+	dev_net_set(dev, net);
+	dev->rtnl_link_ops = ops;
 	dev->real_num_tx_queues = real_num_queues;
+
 	if (strchr(dev->name, '%')) {
 		err = dev_alloc_name(dev, dev->name);
 		if (err < 0)
 			goto err_free;
 	}
 
-	dev_net_set(dev, net);
-	dev->rtnl_link_ops = ops;
-
 	if (tb[IFLA_MTU])
 		dev->mtu = nla_get_u32(tb[IFLA_MTU]);
 	if (tb[IFLA_ADDRESS])
@@ -1017,6 +1040,7 @@
 err:
 	return ERR_PTR(err);
 }
+EXPORT_SYMBOL(rtnl_create_link);
 
 static int rtnl_newlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 {
@@ -1050,7 +1074,8 @@
 	else
 		dev = NULL;
 
-	if ((err = validate_linkmsg(dev, tb)) < 0)
+	err = validate_linkmsg(dev, tb);
+	if (err < 0)
 		return err;
 
 	if (tb[IFLA_LINKINFO]) {
@@ -1071,6 +1096,7 @@
 
 	if (1) {
 		struct nlattr *attr[ops ? ops->maxtype + 1 : 0], **data = NULL;
+		struct net *dest_net;
 
 		if (ops) {
 			if (ops->maxtype && linkinfo[IFLA_INFO_DATA]) {
@@ -1135,17 +1161,19 @@
 		if (!ifname[0])
 			snprintf(ifname, IFNAMSIZ, "%s%%d", ops->kind);
 
-		dev = rtnl_create_link(net, ifname, ops, tb);
+		dest_net = rtnl_link_get_net(net, tb);
+		dev = rtnl_create_link(net, dest_net, ifname, ops, tb);
 
 		if (IS_ERR(dev))
 			err = PTR_ERR(dev);
 		else if (ops->newlink)
-			err = ops->newlink(dev, tb, data);
+			err = ops->newlink(net, dev, tb, data);
 		else
 			err = register_netdevice(dev);
-
 		if (err < 0 && !IS_ERR(dev))
 			free_netdev(dev);
+
+		put_net(dest_net);
 		return err;
 	}
 }
@@ -1154,6 +1182,7 @@
 {
 	struct net *net = sock_net(skb->sk);
 	struct ifinfomsg *ifm;
+	char ifname[IFNAMSIZ];
 	struct nlattr *tb[IFLA_MAX+1];
 	struct net_device *dev = NULL;
 	struct sk_buff *nskb;
@@ -1163,19 +1192,23 @@
 	if (err < 0)
 		return err;
 
+	if (tb[IFLA_IFNAME])
+		nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+
 	ifm = nlmsg_data(nlh);
-	if (ifm->ifi_index > 0) {
-		dev = dev_get_by_index(net, ifm->ifi_index);
-		if (dev == NULL)
-			return -ENODEV;
-	} else
+	if (ifm->ifi_index > 0)
+		dev = __dev_get_by_index(net, ifm->ifi_index);
+	else if (tb[IFLA_IFNAME])
+		dev = __dev_get_by_name(net, ifname);
+	else
 		return -EINVAL;
 
+	if (dev == NULL)
+		return -ENODEV;
+
 	nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
-	if (nskb == NULL) {
-		err = -ENOBUFS;
-		goto errout;
-	}
+	if (nskb == NULL)
+		return -ENOBUFS;
 
 	err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid,
 			       nlh->nlmsg_seq, 0, 0);
@@ -1183,11 +1216,8 @@
 		/* -EMSGSIZE implies BUG in if_nlmsg_size */
 		WARN_ON(err == -EMSGSIZE);
 		kfree_skb(nskb);
-		goto errout;
-	}
-	err = rtnl_unicast(nskb, net, NETLINK_CB(skb).pid);
-errout:
-	dev_put(dev);
+	} else
+		err = rtnl_unicast(nskb, net, NETLINK_CB(skb).pid);
 
 	return err;
 }
@@ -1199,7 +1229,7 @@
 
 	if (s_idx == 0)
 		s_idx = 1;
-	for (idx=1; idx<NPROTO; idx++) {
+	for (idx = 1; idx < NPROTO; idx++) {
 		int type = cb->nlh->nlmsg_type-RTM_BASE;
 		if (idx < s_idx || idx == PF_PACKET)
 			continue;
@@ -1266,7 +1296,7 @@
 	if (nlh->nlmsg_len < NLMSG_LENGTH(sizeof(struct rtgenmsg)))
 		return 0;
 
-	family = ((struct rtgenmsg*)NLMSG_DATA(nlh))->rtgen_family;
+	family = ((struct rtgenmsg *)NLMSG_DATA(nlh))->rtgen_family;
 	if (family >= NPROTO)
 		return -EAFNOSUPPORT;
 
@@ -1299,7 +1329,7 @@
 
 	if (nlh->nlmsg_len > min_len) {
 		int attrlen = nlh->nlmsg_len - NLMSG_ALIGN(min_len);
-		struct rtattr *attr = (void*)nlh + NLMSG_ALIGN(min_len);
+		struct rtattr *attr = (void *)nlh + NLMSG_ALIGN(min_len);
 
 		while (RTA_OK(attr, attrlen)) {
 			unsigned flavor = attr->rta_type;
@@ -1405,14 +1435,3 @@
 	rtnl_register(PF_UNSPEC, RTM_GETROUTE, NULL, rtnl_dump_all);
 }
 
-EXPORT_SYMBOL(__rta_fill);
-EXPORT_SYMBOL(rtnetlink_put_metrics);
-EXPORT_SYMBOL(rtnl_lock);
-EXPORT_SYMBOL(rtnl_trylock);
-EXPORT_SYMBOL(rtnl_unlock);
-EXPORT_SYMBOL(rtnl_is_locked);
-EXPORT_SYMBOL(rtnl_unicast);
-EXPORT_SYMBOL(rtnl_notify);
-EXPORT_SYMBOL(rtnl_set_sk_err);
-EXPORT_SYMBOL(rtnl_create_link);
-EXPORT_SYMBOL(ifla_policy);
diff --git a/net/core/skb_dma_map.c b/net/core/skb_dma_map.c
deleted file mode 100644
index 79687df..0000000
--- a/net/core/skb_dma_map.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/* skb_dma_map.c: DMA mapping helpers for socket buffers.
- *
- * Copyright (C) David S. Miller <davem@davemloft.net>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/skbuff.h>
-
-int skb_dma_map(struct device *dev, struct sk_buff *skb,
-		enum dma_data_direction dir)
-{
-	struct skb_shared_info *sp = skb_shinfo(skb);
-	dma_addr_t map;
-	int i;
-
-	map = dma_map_single(dev, skb->data,
-			     skb_headlen(skb), dir);
-	if (dma_mapping_error(dev, map))
-		goto out_err;
-
-	sp->dma_head = map;
-	for (i = 0; i < sp->nr_frags; i++) {
-		skb_frag_t *fp = &sp->frags[i];
-
-		map = dma_map_page(dev, fp->page, fp->page_offset,
-				   fp->size, dir);
-		if (dma_mapping_error(dev, map))
-			goto unwind;
-		sp->dma_maps[i] = map;
-	}
-
-	return 0;
-
-unwind:
-	while (--i >= 0) {
-		skb_frag_t *fp = &sp->frags[i];
-
-		dma_unmap_page(dev, sp->dma_maps[i],
-			       fp->size, dir);
-	}
-	dma_unmap_single(dev, sp->dma_head,
-			 skb_headlen(skb), dir);
-out_err:
-	return -ENOMEM;
-}
-EXPORT_SYMBOL(skb_dma_map);
-
-void skb_dma_unmap(struct device *dev, struct sk_buff *skb,
-		   enum dma_data_direction dir)
-{
-	struct skb_shared_info *sp = skb_shinfo(skb);
-	int i;
-
-	dma_unmap_single(dev, sp->dma_head,
-			 skb_headlen(skb), dir);
-	for (i = 0; i < sp->nr_frags; i++) {
-		skb_frag_t *fp = &sp->frags[i];
-
-		dma_unmap_page(dev, sp->dma_maps[i],
-			       fp->size, dir);
-	}
-}
-EXPORT_SYMBOL(skb_dma_unmap);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index ec85681..bfa3e78 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -493,6 +493,9 @@
 {
 	struct skb_shared_info *shinfo;
 
+	if (irqs_disabled())
+		return 0;
+
 	if (skb_is_nonlinear(skb) || skb->fclone != SKB_FCLONE_UNAVAILABLE)
 		return 0;
 
@@ -546,7 +549,7 @@
 #endif
 	new->protocol		= old->protocol;
 	new->mark		= old->mark;
-	new->iif		= old->iif;
+	new->skb_iif		= old->skb_iif;
 	__nf_copy(new, old);
 #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
     defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
diff --git a/net/core/sock.c b/net/core/sock.c
index 7626b6a..76ff58d 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -274,25 +274,27 @@
 
 int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
-	int err = 0;
+	int err;
 	int skb_len;
+	unsigned long flags;
+	struct sk_buff_head *list = &sk->sk_receive_queue;
 
 	/* Cast sk->rcvbuf to unsigned... It's pointless, but reduces
 	   number of warnings when compiling with -W --ANK
 	 */
 	if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
 	    (unsigned)sk->sk_rcvbuf) {
-		err = -ENOMEM;
-		goto out;
+		atomic_inc(&sk->sk_drops);
+		return -ENOMEM;
 	}
 
 	err = sk_filter(sk, skb);
 	if (err)
-		goto out;
+		return err;
 
 	if (!sk_rmem_schedule(sk, skb->truesize)) {
-		err = -ENOBUFS;
-		goto out;
+		atomic_inc(&sk->sk_drops);
+		return -ENOBUFS;
 	}
 
 	skb->dev = NULL;
@@ -305,12 +307,14 @@
 	 */
 	skb_len = skb->len;
 
-	skb_queue_tail(&sk->sk_receive_queue, skb);
+	spin_lock_irqsave(&list->lock, flags);
+	skb->dropcount = atomic_read(&sk->sk_drops);
+	__skb_queue_tail(list, skb);
+	spin_unlock_irqrestore(&list->lock, flags);
 
 	if (!sock_flag(sk, SOCK_DEAD))
 		sk->sk_data_ready(sk, skb_len);
-out:
-	return err;
+	return 0;
 }
 EXPORT_SYMBOL(sock_queue_rcv_skb);
 
@@ -348,11 +352,18 @@
 }
 EXPORT_SYMBOL(sk_receive_skb);
 
+void sk_reset_txq(struct sock *sk)
+{
+	sk_tx_queue_clear(sk);
+}
+EXPORT_SYMBOL(sk_reset_txq);
+
 struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
 {
 	struct dst_entry *dst = sk->sk_dst_cache;
 
 	if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+		sk_tx_queue_clear(sk);
 		sk->sk_dst_cache = NULL;
 		dst_release(dst);
 		return NULL;
@@ -406,17 +417,18 @@
 	if (copy_from_user(devname, optval, optlen))
 		goto out;
 
-	if (devname[0] == '\0') {
-		index = 0;
-	} else {
-		struct net_device *dev = dev_get_by_name(net, devname);
+	index = 0;
+	if (devname[0] != '\0') {
+		struct net_device *dev;
 
+		rcu_read_lock();
+		dev = dev_get_by_name_rcu(net, devname);
+		if (dev)
+			index = dev->ifindex;
+		rcu_read_unlock();
 		ret = -ENODEV;
 		if (!dev)
 			goto out;
-
-		index = dev->ifindex;
-		dev_put(dev);
 	}
 
 	lock_sock(sk);
@@ -702,6 +714,12 @@
 
 		/* We implement the SO_SNDLOWAT etc to
 		   not be settable (1003.1g 5.3) */
+	case SO_RXQ_OVFL:
+		if (valbool)
+			sock_set_flag(sk, SOCK_RXQ_OVFL);
+		else
+			sock_reset_flag(sk, SOCK_RXQ_OVFL);
+		break;
 	default:
 		ret = -ENOPROTOOPT;
 		break;
@@ -901,6 +919,10 @@
 		v.val = sk->sk_mark;
 		break;
 
+	case SO_RXQ_OVFL:
+		v.val = !!sock_flag(sk, SOCK_RXQ_OVFL);
+		break;
+
 	default:
 		return -ENOPROTOOPT;
 	}
@@ -939,7 +961,8 @@
 	void *sptr = nsk->sk_security;
 #endif
 	BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
-		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt) +
+		     sizeof(osk->sk_tx_queue_mapping));
 	memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
 	       osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
 #ifdef CONFIG_SECURITY_NETWORK
@@ -983,6 +1006,7 @@
 
 		if (!try_module_get(prot->owner))
 			goto out_free_sec;
+		sk_tx_queue_clear(sk);
 	}
 
 	return sk;
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 7db1de0..0612487 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -10,14 +10,15 @@
 #include <linux/module.h>
 #include <linux/socket.h>
 #include <linux/netdevice.h>
+#include <linux/ratelimit.h>
 #include <linux/init.h>
+
 #include <net/ip.h>
 #include <net/sock.h>
 
 static struct ctl_table net_core_table[] = {
 #ifdef CONFIG_NET
 	{
-		.ctl_name	= NET_CORE_WMEM_MAX,
 		.procname	= "wmem_max",
 		.data		= &sysctl_wmem_max,
 		.maxlen		= sizeof(int),
@@ -25,7 +26,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_RMEM_MAX,
 		.procname	= "rmem_max",
 		.data		= &sysctl_rmem_max,
 		.maxlen		= sizeof(int),
@@ -33,7 +33,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_WMEM_DEFAULT,
 		.procname	= "wmem_default",
 		.data		= &sysctl_wmem_default,
 		.maxlen		= sizeof(int),
@@ -41,7 +40,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_RMEM_DEFAULT,
 		.procname	= "rmem_default",
 		.data		= &sysctl_rmem_default,
 		.maxlen		= sizeof(int),
@@ -49,7 +47,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_DEV_WEIGHT,
 		.procname	= "dev_weight",
 		.data		= &weight_p,
 		.maxlen		= sizeof(int),
@@ -57,7 +54,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_MAX_BACKLOG,
 		.procname	= "netdev_max_backlog",
 		.data		= &netdev_max_backlog,
 		.maxlen		= sizeof(int),
@@ -65,16 +61,13 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_MSG_COST,
 		.procname	= "message_cost",
 		.data		= &net_ratelimit_state.interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_CORE_MSG_BURST,
 		.procname	= "message_burst",
 		.data		= &net_ratelimit_state.burst,
 		.maxlen		= sizeof(int),
@@ -82,7 +75,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_CORE_OPTMEM_MAX,
 		.procname	= "optmem_max",
 		.data		= &sysctl_optmem_max,
 		.maxlen		= sizeof(int),
@@ -91,7 +83,6 @@
 	},
 #endif /* CONFIG_NET */
 	{
-		.ctl_name	= NET_CORE_BUDGET,
 		.procname	= "netdev_budget",
 		.data		= &netdev_budget,
 		.maxlen		= sizeof(int),
@@ -99,31 +90,29 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_WARNINGS,
 		.procname	= "warnings",
 		.data		= &net_msg_warn,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table netns_core_table[] = {
 	{
-		.ctl_name	= NET_CORE_SOMAXCONN,
 		.procname	= "somaxconn",
 		.data		= &init_net.core.sysctl_somaxconn,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 __net_initdata struct ctl_path net_core_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "core", .ctl_name = NET_CORE, },
+	{ .procname = "net", },
+	{ .procname = "core", },
 	{ },
 };
 
@@ -134,7 +123,7 @@
 	net->core.sysctl_somaxconn = SOMAXCONN;
 
 	tbl = netns_core_table;
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		tbl = kmemdup(tbl, sizeof(netns_core_table), GFP_KERNEL);
 		if (tbl == NULL)
 			goto err_dup;
diff --git a/net/core/utils.c b/net/core/utils.c
index 83221ae..8382502 100644
--- a/net/core/utils.c
+++ b/net/core/utils.c
@@ -24,6 +24,8 @@
 #include <linux/types.h>
 #include <linux/percpu.h>
 #include <linux/init.h>
+#include <linux/ratelimit.h>
+
 #include <net/sock.h>
 
 #include <asm/byteorder.h>
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index ac1205d..db9f5b3 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1085,8 +1085,8 @@
 	u8 value_byte;
 	u32 value_int;
 
-	if (!tb[DCB_ATTR_BCN] || !netdev->dcbnl_ops->setbcncfg
-	    || !netdev->dcbnl_ops->setbcnrp)
+	if (!tb[DCB_ATTR_BCN] || !netdev->dcbnl_ops->setbcncfg ||
+	    !netdev->dcbnl_ops->setbcnrp)
 		return ret;
 
 	ret = nla_parse_nested(data, DCB_BCN_ATTR_MAX,
@@ -1126,7 +1126,7 @@
 	u32 pid = skb ? NETLINK_CB(skb).pid : 0;
 	int ret = -EINVAL;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	ret = nlmsg_parse(nlh, sizeof(*dcb), tb, DCB_ATTR_MAX,
diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c
index e8cf99e..a47a8c9 100644
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -33,20 +33,20 @@
 static int ccid2_debug;
 #define ccid2_pr_debug(format, a...)	DCCP_PR_DEBUG(ccid2_debug, format, ##a)
 
-static void ccid2_hc_tx_check_sanity(const struct ccid2_hc_tx_sock *hctx)
+static void ccid2_hc_tx_check_sanity(const struct ccid2_hc_tx_sock *hc)
 {
 	int len = 0;
 	int pipe = 0;
-	struct ccid2_seq *seqp = hctx->ccid2hctx_seqh;
+	struct ccid2_seq *seqp = hc->tx_seqh;
 
 	/* there is data in the chain */
-	if (seqp != hctx->ccid2hctx_seqt) {
+	if (seqp != hc->tx_seqt) {
 		seqp = seqp->ccid2s_prev;
 		len++;
 		if (!seqp->ccid2s_acked)
 			pipe++;
 
-		while (seqp != hctx->ccid2hctx_seqt) {
+		while (seqp != hc->tx_seqt) {
 			struct ccid2_seq *prev = seqp->ccid2s_prev;
 
 			len++;
@@ -63,30 +63,30 @@
 		}
 	}
 
-	BUG_ON(pipe != hctx->ccid2hctx_pipe);
+	BUG_ON(pipe != hc->tx_pipe);
 	ccid2_pr_debug("len of chain=%d\n", len);
 
 	do {
 		seqp = seqp->ccid2s_prev;
 		len++;
-	} while (seqp != hctx->ccid2hctx_seqh);
+	} while (seqp != hc->tx_seqh);
 
 	ccid2_pr_debug("total len=%d\n", len);
-	BUG_ON(len != hctx->ccid2hctx_seqbufc * CCID2_SEQBUF_LEN);
+	BUG_ON(len != hc->tx_seqbufc * CCID2_SEQBUF_LEN);
 }
 #else
 #define ccid2_pr_debug(format, a...)
-#define ccid2_hc_tx_check_sanity(hctx)
+#define ccid2_hc_tx_check_sanity(hc)
 #endif
 
-static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hctx)
+static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hc)
 {
 	struct ccid2_seq *seqp;
 	int i;
 
 	/* check if we have space to preserve the pointer to the buffer */
-	if (hctx->ccid2hctx_seqbufc >= (sizeof(hctx->ccid2hctx_seqbuf) /
-					sizeof(struct ccid2_seq*)))
+	if (hc->tx_seqbufc >= (sizeof(hc->tx_seqbuf) /
+			       sizeof(struct ccid2_seq *)))
 		return -ENOMEM;
 
 	/* allocate buffer and initialize linked list */
@@ -102,29 +102,29 @@
 	seqp->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1];
 
 	/* This is the first allocation.  Initiate the head and tail.  */
-	if (hctx->ccid2hctx_seqbufc == 0)
-		hctx->ccid2hctx_seqh = hctx->ccid2hctx_seqt = seqp;
+	if (hc->tx_seqbufc == 0)
+		hc->tx_seqh = hc->tx_seqt = seqp;
 	else {
 		/* link the existing list with the one we just created */
-		hctx->ccid2hctx_seqh->ccid2s_next = seqp;
-		seqp->ccid2s_prev = hctx->ccid2hctx_seqh;
+		hc->tx_seqh->ccid2s_next = seqp;
+		seqp->ccid2s_prev = hc->tx_seqh;
 
-		hctx->ccid2hctx_seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1];
-		seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hctx->ccid2hctx_seqt;
+		hc->tx_seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1];
+		seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hc->tx_seqt;
 	}
 
 	/* store the original pointer to the buffer so we can free it */
-	hctx->ccid2hctx_seqbuf[hctx->ccid2hctx_seqbufc] = seqp;
-	hctx->ccid2hctx_seqbufc++;
+	hc->tx_seqbuf[hc->tx_seqbufc] = seqp;
+	hc->tx_seqbufc++;
 
 	return 0;
 }
 
 static int ccid2_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (hctx->ccid2hctx_pipe < hctx->ccid2hctx_cwnd)
+	if (hc->tx_pipe < hc->tx_cwnd)
 		return 0;
 
 	return 1; /* XXX CCID should dequeue when ready instead of polling */
@@ -133,7 +133,7 @@
 static void ccid2_change_l_ack_ratio(struct sock *sk, u32 val)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->ccid2hctx_cwnd, 2);
+	u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->tx_cwnd, 2);
 
 	/*
 	 * Ensure that Ack Ratio does not exceed ceil(cwnd/2), which is (2) from
@@ -155,10 +155,10 @@
 	dp->dccps_l_ack_ratio = val;
 }
 
-static void ccid2_change_srtt(struct ccid2_hc_tx_sock *hctx, long val)
+static void ccid2_change_srtt(struct ccid2_hc_tx_sock *hc, long val)
 {
 	ccid2_pr_debug("change SRTT to %ld\n", val);
-	hctx->ccid2hctx_srtt = val;
+	hc->tx_srtt = val;
 }
 
 static void ccid2_start_rto_timer(struct sock *sk);
@@ -166,45 +166,44 @@
 static void ccid2_hc_tx_rto_expire(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	long s;
 
 	bh_lock_sock(sk);
 	if (sock_owned_by_user(sk)) {
-		sk_reset_timer(sk, &hctx->ccid2hctx_rtotimer,
-			       jiffies + HZ / 5);
+		sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + HZ / 5);
 		goto out;
 	}
 
 	ccid2_pr_debug("RTO_EXPIRE\n");
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 
 	/* back-off timer */
-	hctx->ccid2hctx_rto <<= 1;
+	hc->tx_rto <<= 1;
 
-	s = hctx->ccid2hctx_rto / HZ;
+	s = hc->tx_rto / HZ;
 	if (s > 60)
-		hctx->ccid2hctx_rto = 60 * HZ;
+		hc->tx_rto = 60 * HZ;
 
 	ccid2_start_rto_timer(sk);
 
 	/* adjust pipe, cwnd etc */
-	hctx->ccid2hctx_ssthresh = hctx->ccid2hctx_cwnd / 2;
-	if (hctx->ccid2hctx_ssthresh < 2)
-		hctx->ccid2hctx_ssthresh = 2;
-	hctx->ccid2hctx_cwnd	 = 1;
-	hctx->ccid2hctx_pipe	 = 0;
+	hc->tx_ssthresh = hc->tx_cwnd / 2;
+	if (hc->tx_ssthresh < 2)
+		hc->tx_ssthresh = 2;
+	hc->tx_cwnd	 = 1;
+	hc->tx_pipe	 = 0;
 
 	/* clear state about stuff we sent */
-	hctx->ccid2hctx_seqt = hctx->ccid2hctx_seqh;
-	hctx->ccid2hctx_packets_acked = 0;
+	hc->tx_seqt = hc->tx_seqh;
+	hc->tx_packets_acked = 0;
 
 	/* clear ack ratio state. */
-	hctx->ccid2hctx_rpseq	 = 0;
-	hctx->ccid2hctx_rpdupack = -1;
+	hc->tx_rpseq    = 0;
+	hc->tx_rpdupack = -1;
 	ccid2_change_l_ack_ratio(sk, 1);
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 out:
 	bh_unlock_sock(sk);
 	sock_put(sk);
@@ -212,42 +211,40 @@
 
 static void ccid2_start_rto_timer(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	ccid2_pr_debug("setting RTO timeout=%ld\n", hctx->ccid2hctx_rto);
+	ccid2_pr_debug("setting RTO timeout=%ld\n", hc->tx_rto);
 
-	BUG_ON(timer_pending(&hctx->ccid2hctx_rtotimer));
-	sk_reset_timer(sk, &hctx->ccid2hctx_rtotimer,
-		       jiffies + hctx->ccid2hctx_rto);
+	BUG_ON(timer_pending(&hc->tx_rtotimer));
+	sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto);
 }
 
 static void ccid2_hc_tx_packet_sent(struct sock *sk, int more, unsigned int len)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	struct ccid2_seq *next;
 
-	hctx->ccid2hctx_pipe++;
+	hc->tx_pipe++;
 
-	hctx->ccid2hctx_seqh->ccid2s_seq   = dp->dccps_gss;
-	hctx->ccid2hctx_seqh->ccid2s_acked = 0;
-	hctx->ccid2hctx_seqh->ccid2s_sent  = jiffies;
+	hc->tx_seqh->ccid2s_seq   = dp->dccps_gss;
+	hc->tx_seqh->ccid2s_acked = 0;
+	hc->tx_seqh->ccid2s_sent  = jiffies;
 
-	next = hctx->ccid2hctx_seqh->ccid2s_next;
+	next = hc->tx_seqh->ccid2s_next;
 	/* check if we need to alloc more space */
-	if (next == hctx->ccid2hctx_seqt) {
-		if (ccid2_hc_tx_alloc_seq(hctx)) {
+	if (next == hc->tx_seqt) {
+		if (ccid2_hc_tx_alloc_seq(hc)) {
 			DCCP_CRIT("packet history - out of memory!");
 			/* FIXME: find a more graceful way to bail out */
 			return;
 		}
-		next = hctx->ccid2hctx_seqh->ccid2s_next;
-		BUG_ON(next == hctx->ccid2hctx_seqt);
+		next = hc->tx_seqh->ccid2s_next;
+		BUG_ON(next == hc->tx_seqt);
 	}
-	hctx->ccid2hctx_seqh = next;
+	hc->tx_seqh = next;
 
-	ccid2_pr_debug("cwnd=%d pipe=%d\n", hctx->ccid2hctx_cwnd,
-		       hctx->ccid2hctx_pipe);
+	ccid2_pr_debug("cwnd=%d pipe=%d\n", hc->tx_cwnd, hc->tx_pipe);
 
 	/*
 	 * FIXME: The code below is broken and the variables have been removed
@@ -270,12 +267,12 @@
 	 */
 #if 0
 	/* Ack Ratio.  Need to maintain a concept of how many windows we sent */
-	hctx->ccid2hctx_arsent++;
+	hc->tx_arsent++;
 	/* We had an ack loss in this window... */
-	if (hctx->ccid2hctx_ackloss) {
-		if (hctx->ccid2hctx_arsent >= hctx->ccid2hctx_cwnd) {
-			hctx->ccid2hctx_arsent	= 0;
-			hctx->ccid2hctx_ackloss	= 0;
+	if (hc->tx_ackloss) {
+		if (hc->tx_arsent >= hc->tx_cwnd) {
+			hc->tx_arsent  = 0;
+			hc->tx_ackloss = 0;
 		}
 	} else {
 		/* No acks lost up to now... */
@@ -285,28 +282,28 @@
 			int denom = dp->dccps_l_ack_ratio * dp->dccps_l_ack_ratio -
 				    dp->dccps_l_ack_ratio;
 
-			denom = hctx->ccid2hctx_cwnd * hctx->ccid2hctx_cwnd / denom;
+			denom = hc->tx_cwnd * hc->tx_cwnd / denom;
 
-			if (hctx->ccid2hctx_arsent >= denom) {
+			if (hc->tx_arsent >= denom) {
 				ccid2_change_l_ack_ratio(sk, dp->dccps_l_ack_ratio - 1);
-				hctx->ccid2hctx_arsent = 0;
+				hc->tx_arsent = 0;
 			}
 		} else {
 			/* we can't increase ack ratio further [1] */
-			hctx->ccid2hctx_arsent = 0; /* or maybe set it to cwnd*/
+			hc->tx_arsent = 0; /* or maybe set it to cwnd*/
 		}
 	}
 #endif
 
 	/* setup RTO timer */
-	if (!timer_pending(&hctx->ccid2hctx_rtotimer))
+	if (!timer_pending(&hc->tx_rtotimer))
 		ccid2_start_rto_timer(sk);
 
 #ifdef CONFIG_IP_DCCP_CCID2_DEBUG
 	do {
-		struct ccid2_seq *seqp = hctx->ccid2hctx_seqt;
+		struct ccid2_seq *seqp = hc->tx_seqt;
 
-		while (seqp != hctx->ccid2hctx_seqh) {
+		while (seqp != hc->tx_seqh) {
 			ccid2_pr_debug("out seq=%llu acked=%d time=%lu\n",
 				       (unsigned long long)seqp->ccid2s_seq,
 				       seqp->ccid2s_acked, seqp->ccid2s_sent);
@@ -314,7 +311,7 @@
 		}
 	} while (0);
 	ccid2_pr_debug("=========\n");
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 #endif
 }
 
@@ -382,9 +379,9 @@
 
 static void ccid2_hc_tx_kill_rto_timer(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	sk_stop_timer(sk, &hctx->ccid2hctx_rtotimer);
+	sk_stop_timer(sk, &hc->tx_rtotimer);
 	ccid2_pr_debug("deleted RTO timer\n");
 }
 
@@ -392,75 +389,75 @@
 				 struct ccid2_seq *seqp,
 				 unsigned int *maxincr)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (hctx->ccid2hctx_cwnd < hctx->ccid2hctx_ssthresh) {
-		if (*maxincr > 0 && ++hctx->ccid2hctx_packets_acked == 2) {
-			hctx->ccid2hctx_cwnd += 1;
-			*maxincr	     -= 1;
-			hctx->ccid2hctx_packets_acked = 0;
+	if (hc->tx_cwnd < hc->tx_ssthresh) {
+		if (*maxincr > 0 && ++hc->tx_packets_acked == 2) {
+			hc->tx_cwnd += 1;
+			*maxincr    -= 1;
+			hc->tx_packets_acked = 0;
 		}
-	} else if (++hctx->ccid2hctx_packets_acked >= hctx->ccid2hctx_cwnd) {
-			hctx->ccid2hctx_cwnd += 1;
-			hctx->ccid2hctx_packets_acked = 0;
+	} else if (++hc->tx_packets_acked >= hc->tx_cwnd) {
+			hc->tx_cwnd += 1;
+			hc->tx_packets_acked = 0;
 	}
 
 	/* update RTO */
-	if (hctx->ccid2hctx_srtt == -1 ||
-	    time_after(jiffies, hctx->ccid2hctx_lastrtt + hctx->ccid2hctx_srtt)) {
+	if (hc->tx_srtt == -1 ||
+	    time_after(jiffies, hc->tx_lastrtt + hc->tx_srtt)) {
 		unsigned long r = (long)jiffies - (long)seqp->ccid2s_sent;
 		int s;
 
 		/* first measurement */
-		if (hctx->ccid2hctx_srtt == -1) {
+		if (hc->tx_srtt == -1) {
 			ccid2_pr_debug("R: %lu Time=%lu seq=%llu\n",
 				       r, jiffies,
 				       (unsigned long long)seqp->ccid2s_seq);
-			ccid2_change_srtt(hctx, r);
-			hctx->ccid2hctx_rttvar = r >> 1;
+			ccid2_change_srtt(hc, r);
+			hc->tx_rttvar = r >> 1;
 		} else {
 			/* RTTVAR */
-			long tmp = hctx->ccid2hctx_srtt - r;
+			long tmp = hc->tx_srtt - r;
 			long srtt;
 
 			if (tmp < 0)
 				tmp *= -1;
 
 			tmp >>= 2;
-			hctx->ccid2hctx_rttvar *= 3;
-			hctx->ccid2hctx_rttvar >>= 2;
-			hctx->ccid2hctx_rttvar += tmp;
+			hc->tx_rttvar *= 3;
+			hc->tx_rttvar >>= 2;
+			hc->tx_rttvar += tmp;
 
 			/* SRTT */
-			srtt = hctx->ccid2hctx_srtt;
+			srtt = hc->tx_srtt;
 			srtt *= 7;
 			srtt >>= 3;
 			tmp = r >> 3;
 			srtt += tmp;
-			ccid2_change_srtt(hctx, srtt);
+			ccid2_change_srtt(hc, srtt);
 		}
-		s = hctx->ccid2hctx_rttvar << 2;
+		s = hc->tx_rttvar << 2;
 		/* clock granularity is 1 when based on jiffies */
 		if (!s)
 			s = 1;
-		hctx->ccid2hctx_rto = hctx->ccid2hctx_srtt + s;
+		hc->tx_rto = hc->tx_srtt + s;
 
 		/* must be at least a second */
-		s = hctx->ccid2hctx_rto / HZ;
+		s = hc->tx_rto / HZ;
 		/* DCCP doesn't require this [but I like it cuz my code sux] */
 #if 1
 		if (s < 1)
-			hctx->ccid2hctx_rto = HZ;
+			hc->tx_rto = HZ;
 #endif
 		/* max 60 seconds */
 		if (s > 60)
-			hctx->ccid2hctx_rto = HZ * 60;
+			hc->tx_rto = HZ * 60;
 
-		hctx->ccid2hctx_lastrtt = jiffies;
+		hc->tx_lastrtt = jiffies;
 
 		ccid2_pr_debug("srtt: %ld rttvar: %ld rto: %ld (HZ=%d) R=%lu\n",
-			       hctx->ccid2hctx_srtt, hctx->ccid2hctx_rttvar,
-			       hctx->ccid2hctx_rto, HZ, r);
+			       hc->tx_srtt, hc->tx_rttvar,
+			       hc->tx_rto, HZ, r);
 	}
 
 	/* we got a new ack, so re-start RTO timer */
@@ -470,40 +467,40 @@
 
 static void ccid2_hc_tx_dec_pipe(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (hctx->ccid2hctx_pipe == 0)
+	if (hc->tx_pipe == 0)
 		DCCP_BUG("pipe == 0");
 	else
-		hctx->ccid2hctx_pipe--;
+		hc->tx_pipe--;
 
-	if (hctx->ccid2hctx_pipe == 0)
+	if (hc->tx_pipe == 0)
 		ccid2_hc_tx_kill_rto_timer(sk);
 }
 
 static void ccid2_congestion_event(struct sock *sk, struct ccid2_seq *seqp)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (time_before(seqp->ccid2s_sent, hctx->ccid2hctx_last_cong)) {
+	if (time_before(seqp->ccid2s_sent, hc->tx_last_cong)) {
 		ccid2_pr_debug("Multiple losses in an RTT---treating as one\n");
 		return;
 	}
 
-	hctx->ccid2hctx_last_cong = jiffies;
+	hc->tx_last_cong = jiffies;
 
-	hctx->ccid2hctx_cwnd     = hctx->ccid2hctx_cwnd / 2 ? : 1U;
-	hctx->ccid2hctx_ssthresh = max(hctx->ccid2hctx_cwnd, 2U);
+	hc->tx_cwnd      = hc->tx_cwnd / 2 ? : 1U;
+	hc->tx_ssthresh  = max(hc->tx_cwnd, 2U);
 
 	/* Avoid spurious timeouts resulting from Ack Ratio > cwnd */
-	if (dccp_sk(sk)->dccps_l_ack_ratio > hctx->ccid2hctx_cwnd)
-		ccid2_change_l_ack_ratio(sk, hctx->ccid2hctx_cwnd);
+	if (dccp_sk(sk)->dccps_l_ack_ratio > hc->tx_cwnd)
+		ccid2_change_l_ack_ratio(sk, hc->tx_cwnd);
 }
 
 static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	u64 ackno, seqno;
 	struct ccid2_seq *seqp;
 	unsigned char *vector;
@@ -512,7 +509,7 @@
 	int done = 0;
 	unsigned int maxincr = 0;
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 	/* check reverse path congestion */
 	seqno = DCCP_SKB_CB(skb)->dccpd_seq;
 
@@ -521,21 +518,21 @@
 	 * -sorbo.
 	 */
 	/* need to bootstrap */
-	if (hctx->ccid2hctx_rpdupack == -1) {
-		hctx->ccid2hctx_rpdupack = 0;
-		hctx->ccid2hctx_rpseq = seqno;
+	if (hc->tx_rpdupack == -1) {
+		hc->tx_rpdupack = 0;
+		hc->tx_rpseq    = seqno;
 	} else {
 		/* check if packet is consecutive */
-		if (dccp_delta_seqno(hctx->ccid2hctx_rpseq, seqno) == 1)
-			hctx->ccid2hctx_rpseq = seqno;
+		if (dccp_delta_seqno(hc->tx_rpseq, seqno) == 1)
+			hc->tx_rpseq = seqno;
 		/* it's a later packet */
-		else if (after48(seqno, hctx->ccid2hctx_rpseq)) {
-			hctx->ccid2hctx_rpdupack++;
+		else if (after48(seqno, hc->tx_rpseq)) {
+			hc->tx_rpdupack++;
 
 			/* check if we got enough dupacks */
-			if (hctx->ccid2hctx_rpdupack >= NUMDUPACK) {
-				hctx->ccid2hctx_rpdupack = -1; /* XXX lame */
-				hctx->ccid2hctx_rpseq = 0;
+			if (hc->tx_rpdupack >= NUMDUPACK) {
+				hc->tx_rpdupack = -1; /* XXX lame */
+				hc->tx_rpseq    = 0;
 
 				ccid2_change_l_ack_ratio(sk, 2 * dp->dccps_l_ack_ratio);
 			}
@@ -544,7 +541,7 @@
 
 	/* check forward path congestion */
 	/* still didn't send out new data packets */
-	if (hctx->ccid2hctx_seqh == hctx->ccid2hctx_seqt)
+	if (hc->tx_seqh == hc->tx_seqt)
 		return;
 
 	switch (DCCP_SKB_CB(skb)->dccpd_type) {
@@ -556,14 +553,14 @@
 	}
 
 	ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq;
-	if (after48(ackno, hctx->ccid2hctx_high_ack))
-		hctx->ccid2hctx_high_ack = ackno;
+	if (after48(ackno, hc->tx_high_ack))
+		hc->tx_high_ack = ackno;
 
-	seqp = hctx->ccid2hctx_seqt;
+	seqp = hc->tx_seqt;
 	while (before48(seqp->ccid2s_seq, ackno)) {
 		seqp = seqp->ccid2s_next;
-		if (seqp == hctx->ccid2hctx_seqh) {
-			seqp = hctx->ccid2hctx_seqh->ccid2s_prev;
+		if (seqp == hc->tx_seqh) {
+			seqp = hc->tx_seqh->ccid2s_prev;
 			break;
 		}
 	}
@@ -573,7 +570,7 @@
 	 * packets per acknowledgement. Rounding up avoids that cwnd is not
 	 * advanced when Ack Ratio is 1 and gives a slight edge otherwise.
 	 */
-	if (hctx->ccid2hctx_cwnd < hctx->ccid2hctx_ssthresh)
+	if (hc->tx_cwnd < hc->tx_ssthresh)
 		maxincr = DIV_ROUND_UP(dp->dccps_l_ack_ratio, 2);
 
 	/* go through all ack vectors */
@@ -592,7 +589,7 @@
 			 * seqnos.
 			 */
 			while (after48(seqp->ccid2s_seq, ackno)) {
-				if (seqp == hctx->ccid2hctx_seqt) {
+				if (seqp == hc->tx_seqt) {
 					done = 1;
 					break;
 				}
@@ -624,7 +621,7 @@
 						       (unsigned long long)seqp->ccid2s_seq);
 					ccid2_hc_tx_dec_pipe(sk);
 				}
-				if (seqp == hctx->ccid2hctx_seqt) {
+				if (seqp == hc->tx_seqt) {
 					done = 1;
 					break;
 				}
@@ -643,11 +640,11 @@
 	/* The state about what is acked should be correct now
 	 * Check for NUMDUPACK
 	 */
-	seqp = hctx->ccid2hctx_seqt;
-	while (before48(seqp->ccid2s_seq, hctx->ccid2hctx_high_ack)) {
+	seqp = hc->tx_seqt;
+	while (before48(seqp->ccid2s_seq, hc->tx_high_ack)) {
 		seqp = seqp->ccid2s_next;
-		if (seqp == hctx->ccid2hctx_seqh) {
-			seqp = hctx->ccid2hctx_seqh->ccid2s_prev;
+		if (seqp == hc->tx_seqh) {
+			seqp = hc->tx_seqh->ccid2s_prev;
 			break;
 		}
 	}
@@ -658,7 +655,7 @@
 			if (done == NUMDUPACK)
 				break;
 		}
-		if (seqp == hctx->ccid2hctx_seqt)
+		if (seqp == hc->tx_seqt)
 			break;
 		seqp = seqp->ccid2s_prev;
 	}
@@ -681,86 +678,86 @@
 				ccid2_congestion_event(sk, seqp);
 				ccid2_hc_tx_dec_pipe(sk);
 			}
-			if (seqp == hctx->ccid2hctx_seqt)
+			if (seqp == hc->tx_seqt)
 				break;
 			seqp = seqp->ccid2s_prev;
 		}
 
-		hctx->ccid2hctx_seqt = last_acked;
+		hc->tx_seqt = last_acked;
 	}
 
 	/* trim acked packets in tail */
-	while (hctx->ccid2hctx_seqt != hctx->ccid2hctx_seqh) {
-		if (!hctx->ccid2hctx_seqt->ccid2s_acked)
+	while (hc->tx_seqt != hc->tx_seqh) {
+		if (!hc->tx_seqt->ccid2s_acked)
 			break;
 
-		hctx->ccid2hctx_seqt = hctx->ccid2hctx_seqt->ccid2s_next;
+		hc->tx_seqt = hc->tx_seqt->ccid2s_next;
 	}
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 }
 
 static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid_priv(ccid);
+	struct ccid2_hc_tx_sock *hc = ccid_priv(ccid);
 	struct dccp_sock *dp = dccp_sk(sk);
 	u32 max_ratio;
 
 	/* RFC 4341, 5: initialise ssthresh to arbitrarily high (max) value */
-	hctx->ccid2hctx_ssthresh  = ~0U;
+	hc->tx_ssthresh = ~0U;
 
 	/*
 	 * RFC 4341, 5: "The cwnd parameter is initialized to at most four
 	 * packets for new connections, following the rules from [RFC3390]".
 	 * We need to convert the bytes of RFC3390 into the packets of RFC 4341.
 	 */
-	hctx->ccid2hctx_cwnd = clamp(4380U / dp->dccps_mss_cache, 2U, 4U);
+	hc->tx_cwnd = clamp(4380U / dp->dccps_mss_cache, 2U, 4U);
 
 	/* Make sure that Ack Ratio is enabled and within bounds. */
-	max_ratio = DIV_ROUND_UP(hctx->ccid2hctx_cwnd, 2);
+	max_ratio = DIV_ROUND_UP(hc->tx_cwnd, 2);
 	if (dp->dccps_l_ack_ratio == 0 || dp->dccps_l_ack_ratio > max_ratio)
 		dp->dccps_l_ack_ratio = max_ratio;
 
 	/* XXX init ~ to window size... */
-	if (ccid2_hc_tx_alloc_seq(hctx))
+	if (ccid2_hc_tx_alloc_seq(hc))
 		return -ENOMEM;
 
-	hctx->ccid2hctx_rto	 = 3 * HZ;
-	ccid2_change_srtt(hctx, -1);
-	hctx->ccid2hctx_rttvar	 = -1;
-	hctx->ccid2hctx_rpdupack = -1;
-	hctx->ccid2hctx_last_cong = jiffies;
-	setup_timer(&hctx->ccid2hctx_rtotimer, ccid2_hc_tx_rto_expire,
+	hc->tx_rto	 = 3 * HZ;
+	ccid2_change_srtt(hc, -1);
+	hc->tx_rttvar    = -1;
+	hc->tx_rpdupack  = -1;
+	hc->tx_last_cong = jiffies;
+	setup_timer(&hc->tx_rtotimer, ccid2_hc_tx_rto_expire,
 			(unsigned long)sk);
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 	return 0;
 }
 
 static void ccid2_hc_tx_exit(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	int i;
 
 	ccid2_hc_tx_kill_rto_timer(sk);
 
-	for (i = 0; i < hctx->ccid2hctx_seqbufc; i++)
-		kfree(hctx->ccid2hctx_seqbuf[i]);
-	hctx->ccid2hctx_seqbufc = 0;
+	for (i = 0; i < hc->tx_seqbufc; i++)
+		kfree(hc->tx_seqbuf[i]);
+	hc->tx_seqbufc = 0;
 }
 
 static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
 	const struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid2_hc_rx_sock *hcrx = ccid2_hc_rx_sk(sk);
+	struct ccid2_hc_rx_sock *hc = ccid2_hc_rx_sk(sk);
 
 	switch (DCCP_SKB_CB(skb)->dccpd_type) {
 	case DCCP_PKT_DATA:
 	case DCCP_PKT_DATAACK:
-		hcrx->ccid2hcrx_data++;
-		if (hcrx->ccid2hcrx_data >= dp->dccps_r_ack_ratio) {
+		hc->rx_data++;
+		if (hc->rx_data >= dp->dccps_r_ack_ratio) {
 			dccp_send_ack(sk);
-			hcrx->ccid2hcrx_data = 0;
+			hc->rx_data = 0;
 		}
 		break;
 	}
diff --git a/net/dccp/ccids/ccid2.h b/net/dccp/ccids/ccid2.h
index 326ac90..1ec6a30 100644
--- a/net/dccp/ccids/ccid2.h
+++ b/net/dccp/ccids/ccid2.h
@@ -40,34 +40,34 @@
 
 /**
  * struct ccid2_hc_tx_sock - CCID2 TX half connection
- * @ccid2hctx_{cwnd,ssthresh,pipe}: as per RFC 4341, section 5
- * @ccid2hctx_packets_acked - Ack counter for deriving cwnd growth (RFC 3465)
- * @ccid2hctx_lastrtt -time RTT was last measured
- * @ccid2hctx_rpseq - last consecutive seqno
- * @ccid2hctx_rpdupack - dupacks since rpseq
+ * @tx_{cwnd,ssthresh,pipe}: as per RFC 4341, section 5
+ * @tx_packets_acked:	     Ack counter for deriving cwnd growth (RFC 3465)
+ * @tx_lastrtt:		     time RTT was last measured
+ * @tx_rpseq:		     last consecutive seqno
+ * @tx_rpdupack:	     dupacks since rpseq
  */
 struct ccid2_hc_tx_sock {
-	u32			ccid2hctx_cwnd;
-	u32			ccid2hctx_ssthresh;
-	u32			ccid2hctx_pipe;
-	u32			ccid2hctx_packets_acked;
-	struct ccid2_seq	*ccid2hctx_seqbuf[CCID2_SEQBUF_MAX];
-	int			ccid2hctx_seqbufc;
-	struct ccid2_seq	*ccid2hctx_seqh;
-	struct ccid2_seq	*ccid2hctx_seqt;
-	long			ccid2hctx_rto;
-	long			ccid2hctx_srtt;
-	long			ccid2hctx_rttvar;
-	unsigned long		ccid2hctx_lastrtt;
-	struct timer_list	ccid2hctx_rtotimer;
-	u64			ccid2hctx_rpseq;
-	int			ccid2hctx_rpdupack;
-	unsigned long		ccid2hctx_last_cong;
-	u64			ccid2hctx_high_ack;
+	u32			tx_cwnd;
+	u32			tx_ssthresh;
+	u32			tx_pipe;
+	u32			tx_packets_acked;
+	struct ccid2_seq	*tx_seqbuf[CCID2_SEQBUF_MAX];
+	int			tx_seqbufc;
+	struct ccid2_seq	*tx_seqh;
+	struct ccid2_seq	*tx_seqt;
+	long			tx_rto;
+	long			tx_srtt;
+	long			tx_rttvar;
+	unsigned long		tx_lastrtt;
+	struct timer_list	tx_rtotimer;
+	u64			tx_rpseq;
+	int			tx_rpdupack;
+	unsigned long		tx_last_cong;
+	u64			tx_high_ack;
 };
 
 struct ccid2_hc_rx_sock {
-	int	ccid2hcrx_data;
+	int	rx_data;
 };
 
 static inline struct ccid2_hc_tx_sock *ccid2_hc_tx_sk(const struct sock *sk)
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 34dcc79..bcd7632 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -64,14 +64,14 @@
 static void ccid3_hc_tx_set_state(struct sock *sk,
 				  enum ccid3_hc_tx_states state)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-	enum ccid3_hc_tx_states oldstate = hctx->ccid3hctx_state;
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
+	enum ccid3_hc_tx_states oldstate = hc->tx_state;
 
 	ccid3_pr_debug("%s(%p) %-8.8s -> %s\n",
 		       dccp_role(sk), sk, ccid3_tx_state_name(oldstate),
 		       ccid3_tx_state_name(state));
 	WARN_ON(state == oldstate);
-	hctx->ccid3hctx_state = state;
+	hc->tx_state = state;
 }
 
 /*
@@ -85,37 +85,32 @@
  */
 static inline u64 rfc3390_initial_rate(struct sock *sk)
 {
-	const struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-	const __u32 w_init = clamp_t(__u32, 4380U,
-			2 * hctx->ccid3hctx_s, 4 * hctx->ccid3hctx_s);
+	const struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
+	const __u32 w_init = clamp_t(__u32, 4380U, 2 * hc->tx_s, 4 * hc->tx_s);
 
-	return scaled_div(w_init << 6, hctx->ccid3hctx_rtt);
+	return scaled_div(w_init << 6, hc->tx_rtt);
 }
 
 /*
  * Recalculate t_ipi and delta (should be called whenever X changes)
  */
-static void ccid3_update_send_interval(struct ccid3_hc_tx_sock *hctx)
+static void ccid3_update_send_interval(struct ccid3_hc_tx_sock *hc)
 {
 	/* Calculate new t_ipi = s / X_inst (X_inst is in 64 * bytes/second) */
-	hctx->ccid3hctx_t_ipi = scaled_div32(((u64)hctx->ccid3hctx_s) << 6,
-					     hctx->ccid3hctx_x);
+	hc->tx_t_ipi = scaled_div32(((u64)hc->tx_s) << 6, hc->tx_x);
 
 	/* Calculate new delta by delta = min(t_ipi / 2, t_gran / 2) */
-	hctx->ccid3hctx_delta = min_t(u32, hctx->ccid3hctx_t_ipi / 2,
-					   TFRC_OPSYS_HALF_TIME_GRAN);
+	hc->tx_delta = min_t(u32, hc->tx_t_ipi / 2, TFRC_OPSYS_HALF_TIME_GRAN);
 
-	ccid3_pr_debug("t_ipi=%u, delta=%u, s=%u, X=%u\n",
-		       hctx->ccid3hctx_t_ipi, hctx->ccid3hctx_delta,
-		       hctx->ccid3hctx_s, (unsigned)(hctx->ccid3hctx_x >> 6));
-
+	ccid3_pr_debug("t_ipi=%u, delta=%u, s=%u, X=%u\n", hc->tx_t_ipi,
+		       hc->tx_delta, hc->tx_s, (unsigned)(hc->tx_x >> 6));
 }
 
-static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hctx, ktime_t now)
+static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hc, ktime_t now)
 {
-	u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
+	u32 delta = ktime_us_delta(now, hc->tx_t_last_win_count);
 
-	return delta / hctx->ccid3hctx_rtt;
+	return delta / hc->tx_rtt;
 }
 
 /**
@@ -130,9 +125,9 @@
  */
 static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-	__u64 min_rate = 2 * hctx->ccid3hctx_x_recv;
-	const  __u64 old_x = hctx->ccid3hctx_x;
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
+	__u64 min_rate = 2 * hc->tx_x_recv;
+	const __u64 old_x = hc->tx_x;
 	ktime_t now = stamp ? *stamp : ktime_get_real();
 
 	/*
@@ -141,37 +136,31 @@
 	 * a sender is idle if it has not sent anything over a 2-RTT-period.
 	 * For consistency with X and X_recv, min_rate is also scaled by 2^6.
 	 */
-	if (ccid3_hc_tx_idle_rtt(hctx, now) >= 2) {
+	if (ccid3_hc_tx_idle_rtt(hc, now) >= 2) {
 		min_rate = rfc3390_initial_rate(sk);
-		min_rate = max(min_rate, 2 * hctx->ccid3hctx_x_recv);
+		min_rate = max(min_rate, 2 * hc->tx_x_recv);
 	}
 
-	if (hctx->ccid3hctx_p > 0) {
+	if (hc->tx_p > 0) {
 
-		hctx->ccid3hctx_x = min(((__u64)hctx->ccid3hctx_x_calc) << 6,
-					min_rate);
-		hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
-					(((__u64)hctx->ccid3hctx_s) << 6) /
-								TFRC_T_MBI);
+		hc->tx_x = min(((__u64)hc->tx_x_calc) << 6, min_rate);
+		hc->tx_x = max(hc->tx_x, (((__u64)hc->tx_s) << 6) / TFRC_T_MBI);
 
-	} else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld)
-				- (s64)hctx->ccid3hctx_rtt >= 0) {
+	} else if (ktime_us_delta(now, hc->tx_t_ld) - (s64)hc->tx_rtt >= 0) {
 
-		hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate);
-		hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
-			    scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
-				       hctx->ccid3hctx_rtt));
-		hctx->ccid3hctx_t_ld = now;
+		hc->tx_x = min(2 * hc->tx_x, min_rate);
+		hc->tx_x = max(hc->tx_x,
+			       scaled_div(((__u64)hc->tx_s) << 6, hc->tx_rtt));
+		hc->tx_t_ld = now;
 	}
 
-	if (hctx->ccid3hctx_x != old_x) {
+	if (hc->tx_x != old_x) {
 		ccid3_pr_debug("X_prev=%u, X_now=%u, X_calc=%u, "
 			       "X_recv=%u\n", (unsigned)(old_x >> 6),
-			       (unsigned)(hctx->ccid3hctx_x >> 6),
-			       hctx->ccid3hctx_x_calc,
-			       (unsigned)(hctx->ccid3hctx_x_recv >> 6));
+			       (unsigned)(hc->tx_x >> 6), hc->tx_x_calc,
+			       (unsigned)(hc->tx_x_recv >> 6));
 
-		ccid3_update_send_interval(hctx);
+		ccid3_update_send_interval(hc);
 	}
 }
 
@@ -179,37 +168,37 @@
  *	Track the mean packet size `s' (cf. RFC 4342, 5.3 and  RFC 3448, 4.1)
  *	@len: DCCP packet payload size in bytes
  */
-static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hctx, int len)
+static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hc, int len)
 {
-	const u16 old_s = hctx->ccid3hctx_s;
+	const u16 old_s = hc->tx_s;
 
-	hctx->ccid3hctx_s = tfrc_ewma(hctx->ccid3hctx_s, len, 9);
+	hc->tx_s = tfrc_ewma(hc->tx_s, len, 9);
 
-	if (hctx->ccid3hctx_s != old_s)
-		ccid3_update_send_interval(hctx);
+	if (hc->tx_s != old_s)
+		ccid3_update_send_interval(hc);
 }
 
 /*
  *	Update Window Counter using the algorithm from [RFC 4342, 8.1].
  *	As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt().
  */
-static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
+static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hc,
 						ktime_t now)
 {
-	u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count),
-	    quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt;
+	u32 delta = ktime_us_delta(now, hc->tx_t_last_win_count),
+	    quarter_rtts = (4 * delta) / hc->tx_rtt;
 
 	if (quarter_rtts > 0) {
-		hctx->ccid3hctx_t_last_win_count = now;
-		hctx->ccid3hctx_last_win_count  += min(quarter_rtts, 5U);
-		hctx->ccid3hctx_last_win_count	&= 0xF;		/* mod 16 */
+		hc->tx_t_last_win_count = now;
+		hc->tx_last_win_count  += min(quarter_rtts, 5U);
+		hc->tx_last_win_count  &= 0xF;		/* mod 16 */
 	}
 }
 
 static void ccid3_hc_tx_no_feedback_timer(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	unsigned long t_nfb = USEC_PER_SEC / 5;
 
 	bh_lock_sock(sk);
@@ -220,24 +209,23 @@
 	}
 
 	ccid3_pr_debug("%s(%p, state=%s) - entry \n", dccp_role(sk), sk,
-		       ccid3_tx_state_name(hctx->ccid3hctx_state));
+		       ccid3_tx_state_name(hc->tx_state));
 
-	if (hctx->ccid3hctx_state == TFRC_SSTATE_FBACK)
+	if (hc->tx_state == TFRC_SSTATE_FBACK)
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK);
-	else if (hctx->ccid3hctx_state != TFRC_SSTATE_NO_FBACK)
+	else if (hc->tx_state != TFRC_SSTATE_NO_FBACK)
 		goto out;
 
 	/*
 	 * Determine new allowed sending rate X as per draft rfc3448bis-00, 4.4
 	 */
-	if (hctx->ccid3hctx_t_rto == 0 ||	/* no feedback received yet */
-	    hctx->ccid3hctx_p == 0) {
+	if (hc->tx_t_rto == 0 ||	/* no feedback received yet */
+	    hc->tx_p == 0) {
 
 		/* halve send rate directly */
-		hctx->ccid3hctx_x = max(hctx->ccid3hctx_x / 2,
-					(((__u64)hctx->ccid3hctx_s) << 6) /
-								    TFRC_T_MBI);
-		ccid3_update_send_interval(hctx);
+		hc->tx_x = max(hc->tx_x / 2,
+			       (((__u64)hc->tx_s) << 6) / TFRC_T_MBI);
+		ccid3_update_send_interval(hc);
 	} else {
 		/*
 		 *  Modify the cached value of X_recv
@@ -249,33 +237,32 @@
 		 *
 		 *  Note that X_recv is scaled by 2^6 while X_calc is not
 		 */
-		BUG_ON(hctx->ccid3hctx_p && !hctx->ccid3hctx_x_calc);
+		BUG_ON(hc->tx_p && !hc->tx_x_calc);
 
-		if (hctx->ccid3hctx_x_calc > (hctx->ccid3hctx_x_recv >> 5))
-			hctx->ccid3hctx_x_recv =
-				max(hctx->ccid3hctx_x_recv / 2,
-				    (((__u64)hctx->ccid3hctx_s) << 6) /
-							      (2 * TFRC_T_MBI));
+		if (hc->tx_x_calc > (hc->tx_x_recv >> 5))
+			hc->tx_x_recv =
+				max(hc->tx_x_recv / 2,
+				    (((__u64)hc->tx_s) << 6) / (2*TFRC_T_MBI));
 		else {
-			hctx->ccid3hctx_x_recv = hctx->ccid3hctx_x_calc;
-			hctx->ccid3hctx_x_recv <<= 4;
+			hc->tx_x_recv = hc->tx_x_calc;
+			hc->tx_x_recv <<= 4;
 		}
 		ccid3_hc_tx_update_x(sk, NULL);
 	}
 	ccid3_pr_debug("Reduced X to %llu/64 bytes/sec\n",
-			(unsigned long long)hctx->ccid3hctx_x);
+			(unsigned long long)hc->tx_x);
 
 	/*
 	 * Set new timeout for the nofeedback timer.
 	 * See comments in packet_recv() regarding the value of t_RTO.
 	 */
-	if (unlikely(hctx->ccid3hctx_t_rto == 0))	/* no feedback yet */
+	if (unlikely(hc->tx_t_rto == 0))	/* no feedback yet */
 		t_nfb = TFRC_INITIAL_TIMEOUT;
 	else
-		t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi);
+		t_nfb = max(hc->tx_t_rto, 2 * hc->tx_t_ipi);
 
 restart_timer:
-	sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
+	sk_reset_timer(sk, &hc->tx_no_feedback_timer,
 			   jiffies + usecs_to_jiffies(t_nfb));
 out:
 	bh_unlock_sock(sk);
@@ -291,7 +278,7 @@
 static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	ktime_t now = ktime_get_real();
 	s64 delay;
 
@@ -303,18 +290,17 @@
 	if (unlikely(skb->len == 0))
 		return -EBADMSG;
 
-	switch (hctx->ccid3hctx_state) {
+	switch (hc->tx_state) {
 	case TFRC_SSTATE_NO_SENT:
-		sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
-			       (jiffies +
-				usecs_to_jiffies(TFRC_INITIAL_TIMEOUT)));
-		hctx->ccid3hctx_last_win_count	 = 0;
-		hctx->ccid3hctx_t_last_win_count = now;
+		sk_reset_timer(sk, &hc->tx_no_feedback_timer, (jiffies +
+			       usecs_to_jiffies(TFRC_INITIAL_TIMEOUT)));
+		hc->tx_last_win_count	= 0;
+		hc->tx_t_last_win_count = now;
 
 		/* Set t_0 for initial packet */
-		hctx->ccid3hctx_t_nom = now;
+		hc->tx_t_nom = now;
 
-		hctx->ccid3hctx_s = skb->len;
+		hc->tx_s = skb->len;
 
 		/*
 		 * Use initial RTT sample when available: recommended by erratum
@@ -323,9 +309,9 @@
 		 */
 		if (dp->dccps_syn_rtt) {
 			ccid3_pr_debug("SYN RTT = %uus\n", dp->dccps_syn_rtt);
-			hctx->ccid3hctx_rtt  = dp->dccps_syn_rtt;
-			hctx->ccid3hctx_x    = rfc3390_initial_rate(sk);
-			hctx->ccid3hctx_t_ld = now;
+			hc->tx_rtt  = dp->dccps_syn_rtt;
+			hc->tx_x    = rfc3390_initial_rate(sk);
+			hc->tx_t_ld = now;
 		} else {
 			/*
 			 * Sender does not have RTT sample:
@@ -333,17 +319,17 @@
 			 *   is needed in several parts (e.g.  window counter);
 			 * - set sending rate X_pps = 1pps as per RFC 3448, 4.2.
 			 */
-			hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT;
-			hctx->ccid3hctx_x   = hctx->ccid3hctx_s;
-			hctx->ccid3hctx_x <<= 6;
+			hc->tx_rtt = DCCP_FALLBACK_RTT;
+			hc->tx_x   = hc->tx_s;
+			hc->tx_x <<= 6;
 		}
-		ccid3_update_send_interval(hctx);
+		ccid3_update_send_interval(hc);
 
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK);
 		break;
 	case TFRC_SSTATE_NO_FBACK:
 	case TFRC_SSTATE_FBACK:
-		delay = ktime_us_delta(hctx->ccid3hctx_t_nom, now);
+		delay = ktime_us_delta(hc->tx_t_nom, now);
 		ccid3_pr_debug("delay=%ld\n", (long)delay);
 		/*
 		 *	Scheduling of packet transmissions [RFC 3448, 4.6]
@@ -353,10 +339,10 @@
 		 * else
 		 *       // send the packet in (t_nom - t_now) milliseconds.
 		 */
-		if (delay - (s64)hctx->ccid3hctx_delta >= 1000)
+		if (delay - (s64)hc->tx_delta >= 1000)
 			return (u32)delay / 1000L;
 
-		ccid3_hc_tx_update_win_count(hctx, now);
+		ccid3_hc_tx_update_win_count(hc, now);
 		break;
 	case TFRC_SSTATE_TERM:
 		DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk);
@@ -365,28 +351,27 @@
 
 	/* prepare to send now (add options etc.) */
 	dp->dccps_hc_tx_insert_options = 1;
-	DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count;
+	DCCP_SKB_CB(skb)->dccpd_ccval  = hc->tx_last_win_count;
 
 	/* set the nominal send time for the next following packet */
-	hctx->ccid3hctx_t_nom = ktime_add_us(hctx->ccid3hctx_t_nom,
-					     hctx->ccid3hctx_t_ipi);
+	hc->tx_t_nom = ktime_add_us(hc->tx_t_nom, hc->tx_t_ipi);
 	return 0;
 }
 
 static void ccid3_hc_tx_packet_sent(struct sock *sk, int more,
 				    unsigned int len)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 
-	ccid3_hc_tx_update_s(hctx, len);
+	ccid3_hc_tx_update_s(hc, len);
 
-	if (tfrc_tx_hist_add(&hctx->ccid3hctx_hist, dccp_sk(sk)->dccps_gss))
+	if (tfrc_tx_hist_add(&hc->tx_hist, dccp_sk(sk)->dccps_gss))
 		DCCP_CRIT("packet history - out of memory!");
 }
 
 static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	struct ccid3_options_received *opt_recv;
 	ktime_t now;
 	unsigned long t_nfb;
@@ -397,15 +382,15 @@
 	      DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_DATAACK))
 		return;
 	/* ... and only in the established state */
-	if (hctx->ccid3hctx_state != TFRC_SSTATE_FBACK &&
-	    hctx->ccid3hctx_state != TFRC_SSTATE_NO_FBACK)
+	if (hc->tx_state != TFRC_SSTATE_FBACK &&
+	    hc->tx_state != TFRC_SSTATE_NO_FBACK)
 		return;
 
-	opt_recv = &hctx->ccid3hctx_options_received;
+	opt_recv = &hc->tx_options_received;
 	now = ktime_get_real();
 
 	/* Estimate RTT from history if ACK number is valid */
-	r_sample = tfrc_tx_hist_rtt(hctx->ccid3hctx_hist,
+	r_sample = tfrc_tx_hist_rtt(hc->tx_hist,
 				    DCCP_SKB_CB(skb)->dccpd_ack_seq, now);
 	if (r_sample == 0) {
 		DCCP_WARN("%s(%p): %s with bogus ACK-%llu\n", dccp_role(sk), sk,
@@ -415,37 +400,37 @@
 	}
 
 	/* Update receive rate in units of 64 * bytes/second */
-	hctx->ccid3hctx_x_recv = opt_recv->ccid3or_receive_rate;
-	hctx->ccid3hctx_x_recv <<= 6;
+	hc->tx_x_recv = opt_recv->ccid3or_receive_rate;
+	hc->tx_x_recv <<= 6;
 
 	/* Update loss event rate (which is scaled by 1e6) */
 	pinv = opt_recv->ccid3or_loss_event_rate;
 	if (pinv == ~0U || pinv == 0)	       /* see RFC 4342, 8.5   */
-		hctx->ccid3hctx_p = 0;
+		hc->tx_p = 0;
 	else				       /* can not exceed 100% */
-		hctx->ccid3hctx_p = scaled_div(1, pinv);
+		hc->tx_p = scaled_div(1, pinv);
 	/*
 	 * Validate new RTT sample and update moving average
 	 */
 	r_sample = dccp_sample_rtt(sk, r_sample);
-	hctx->ccid3hctx_rtt = tfrc_ewma(hctx->ccid3hctx_rtt, r_sample, 9);
+	hc->tx_rtt = tfrc_ewma(hc->tx_rtt, r_sample, 9);
 	/*
 	 * Update allowed sending rate X as per draft rfc3448bis-00, 4.2/3
 	 */
-	if (hctx->ccid3hctx_state == TFRC_SSTATE_NO_FBACK) {
+	if (hc->tx_state == TFRC_SSTATE_NO_FBACK) {
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_FBACK);
 
-		if (hctx->ccid3hctx_t_rto == 0) {
+		if (hc->tx_t_rto == 0) {
 			/*
 			 * Initial feedback packet: Larger Initial Windows (4.2)
 			 */
-			hctx->ccid3hctx_x    = rfc3390_initial_rate(sk);
-			hctx->ccid3hctx_t_ld = now;
+			hc->tx_x    = rfc3390_initial_rate(sk);
+			hc->tx_t_ld = now;
 
-			ccid3_update_send_interval(hctx);
+			ccid3_update_send_interval(hc);
 
 			goto done_computing_x;
-		} else if (hctx->ccid3hctx_p == 0) {
+		} else if (hc->tx_p == 0) {
 			/*
 			 * First feedback after nofeedback timer expiry (4.3)
 			 */
@@ -454,25 +439,20 @@
 	}
 
 	/* Update sending rate (step 4 of [RFC 3448, 4.3]) */
-	if (hctx->ccid3hctx_p > 0)
-		hctx->ccid3hctx_x_calc =
-				tfrc_calc_x(hctx->ccid3hctx_s,
-					    hctx->ccid3hctx_rtt,
-					    hctx->ccid3hctx_p);
+	if (hc->tx_p > 0)
+		hc->tx_x_calc = tfrc_calc_x(hc->tx_s, hc->tx_rtt, hc->tx_p);
 	ccid3_hc_tx_update_x(sk, &now);
 
 done_computing_x:
 	ccid3_pr_debug("%s(%p), RTT=%uus (sample=%uus), s=%u, "
 			       "p=%u, X_calc=%u, X_recv=%u, X=%u\n",
-			       dccp_role(sk),
-			       sk, hctx->ccid3hctx_rtt, r_sample,
-			       hctx->ccid3hctx_s, hctx->ccid3hctx_p,
-			       hctx->ccid3hctx_x_calc,
-			       (unsigned)(hctx->ccid3hctx_x_recv >> 6),
-			       (unsigned)(hctx->ccid3hctx_x >> 6));
+			       dccp_role(sk), sk, hc->tx_rtt, r_sample,
+			       hc->tx_s, hc->tx_p, hc->tx_x_calc,
+			       (unsigned)(hc->tx_x_recv >> 6),
+			       (unsigned)(hc->tx_x >> 6));
 
 	/* unschedule no feedback timer */
-	sk_stop_timer(sk, &hctx->ccid3hctx_no_feedback_timer);
+	sk_stop_timer(sk, &hc->tx_no_feedback_timer);
 
 	/*
 	 * As we have calculated new ipi, delta, t_nom it is possible
@@ -486,21 +466,19 @@
 	 * This can help avoid triggering the nofeedback timer too
 	 * often ('spinning') on LANs with small RTTs.
 	 */
-	hctx->ccid3hctx_t_rto = max_t(u32, 4 * hctx->ccid3hctx_rtt,
-					   (CONFIG_IP_DCCP_CCID3_RTO *
-					    (USEC_PER_SEC / 1000)));
+	hc->tx_t_rto = max_t(u32, 4 * hc->tx_rtt, (CONFIG_IP_DCCP_CCID3_RTO *
+						       (USEC_PER_SEC / 1000)));
 	/*
 	 * Schedule no feedback timer to expire in
 	 * max(t_RTO, 2 * s/X)  =  max(t_RTO, 2 * t_ipi)
 	 */
-	t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi);
+	t_nfb = max(hc->tx_t_rto, 2 * hc->tx_t_ipi);
 
 	ccid3_pr_debug("%s(%p), Scheduled no feedback timer to "
 		       "expire in %lu jiffies (%luus)\n",
-		       dccp_role(sk),
-		       sk, usecs_to_jiffies(t_nfb), t_nfb);
+		       dccp_role(sk), sk, usecs_to_jiffies(t_nfb), t_nfb);
 
-	sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
+	sk_reset_timer(sk, &hc->tx_no_feedback_timer,
 			   jiffies + usecs_to_jiffies(t_nfb));
 }
 
@@ -510,11 +488,11 @@
 {
 	int rc = 0;
 	const struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	struct ccid3_options_received *opt_recv;
 	__be32 opt_val;
 
-	opt_recv = &hctx->ccid3hctx_options_received;
+	opt_recv = &hc->tx_options_received;
 
 	if (opt_recv->ccid3or_seqno != dp->dccps_gsr) {
 		opt_recv->ccid3or_seqno		     = dp->dccps_gsr;
@@ -568,56 +546,55 @@
 
 static int ccid3_hc_tx_init(struct ccid *ccid, struct sock *sk)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid_priv(ccid);
+	struct ccid3_hc_tx_sock *hc = ccid_priv(ccid);
 
-	hctx->ccid3hctx_state = TFRC_SSTATE_NO_SENT;
-	hctx->ccid3hctx_hist = NULL;
-	setup_timer(&hctx->ccid3hctx_no_feedback_timer,
+	hc->tx_state = TFRC_SSTATE_NO_SENT;
+	hc->tx_hist  = NULL;
+	setup_timer(&hc->tx_no_feedback_timer,
 			ccid3_hc_tx_no_feedback_timer, (unsigned long)sk);
-
 	return 0;
 }
 
 static void ccid3_hc_tx_exit(struct sock *sk)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 
 	ccid3_hc_tx_set_state(sk, TFRC_SSTATE_TERM);
-	sk_stop_timer(sk, &hctx->ccid3hctx_no_feedback_timer);
+	sk_stop_timer(sk, &hc->tx_no_feedback_timer);
 
-	tfrc_tx_hist_purge(&hctx->ccid3hctx_hist);
+	tfrc_tx_hist_purge(&hc->tx_hist);
 }
 
 static void ccid3_hc_tx_get_info(struct sock *sk, struct tcp_info *info)
 {
-	struct ccid3_hc_tx_sock *hctx;
+	struct ccid3_hc_tx_sock *hc;
 
 	/* Listen socks doesn't have a private CCID block */
 	if (sk->sk_state == DCCP_LISTEN)
 		return;
 
-	hctx = ccid3_hc_tx_sk(sk);
-	info->tcpi_rto = hctx->ccid3hctx_t_rto;
-	info->tcpi_rtt = hctx->ccid3hctx_rtt;
+	hc = ccid3_hc_tx_sk(sk);
+	info->tcpi_rto = hc->tx_t_rto;
+	info->tcpi_rtt = hc->tx_rtt;
 }
 
 static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len,
 				  u32 __user *optval, int __user *optlen)
 {
-	const struct ccid3_hc_tx_sock *hctx;
+	const struct ccid3_hc_tx_sock *hc;
 	const void *val;
 
 	/* Listen socks doesn't have a private CCID block */
 	if (sk->sk_state == DCCP_LISTEN)
 		return -EINVAL;
 
-	hctx = ccid3_hc_tx_sk(sk);
+	hc = ccid3_hc_tx_sk(sk);
 	switch (optname) {
 	case DCCP_SOCKOPT_CCID_TX_INFO:
-		if (len < sizeof(hctx->ccid3hctx_tfrc))
+		if (len < sizeof(hc->tx_tfrc))
 			return -EINVAL;
-		len = sizeof(hctx->ccid3hctx_tfrc);
-		val = &hctx->ccid3hctx_tfrc;
+		len = sizeof(hc->tx_tfrc);
+		val = &hc->tx_tfrc;
 		break;
 	default:
 		return -ENOPROTOOPT;
@@ -657,34 +634,34 @@
 static void ccid3_hc_rx_set_state(struct sock *sk,
 				  enum ccid3_hc_rx_states state)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
-	enum ccid3_hc_rx_states oldstate = hcrx->ccid3hcrx_state;
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
+	enum ccid3_hc_rx_states oldstate = hc->rx_state;
 
 	ccid3_pr_debug("%s(%p) %-8.8s -> %s\n",
 		       dccp_role(sk), sk, ccid3_rx_state_name(oldstate),
 		       ccid3_rx_state_name(state));
 	WARN_ON(state == oldstate);
-	hcrx->ccid3hcrx_state = state;
+	hc->rx_state = state;
 }
 
 static void ccid3_hc_rx_send_feedback(struct sock *sk,
 				      const struct sk_buff *skb,
 				      enum ccid3_fback_type fbtype)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	struct dccp_sock *dp = dccp_sk(sk);
 	ktime_t now;
 	s64 delta = 0;
 
-	if (unlikely(hcrx->ccid3hcrx_state == TFRC_RSTATE_TERM))
+	if (unlikely(hc->rx_state == TFRC_RSTATE_TERM))
 		return;
 
 	now = ktime_get_real();
 
 	switch (fbtype) {
 	case CCID3_FBACK_INITIAL:
-		hcrx->ccid3hcrx_x_recv = 0;
-		hcrx->ccid3hcrx_pinv   = ~0U;   /* see RFC 4342, 8.5 */
+		hc->rx_x_recv = 0;
+		hc->rx_pinv   = ~0U;   /* see RFC 4342, 8.5 */
 		break;
 	case CCID3_FBACK_PARAM_CHANGE:
 		/*
@@ -697,27 +674,26 @@
 		 * the number of bytes since last feedback.
 		 * This is a safe fallback, since X is bounded above by X_calc.
 		 */
-		if (hcrx->ccid3hcrx_x_recv > 0)
+		if (hc->rx_x_recv > 0)
 			break;
 		/* fall through */
 	case CCID3_FBACK_PERIODIC:
-		delta = ktime_us_delta(now, hcrx->ccid3hcrx_tstamp_last_feedback);
+		delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback);
 		if (delta <= 0)
 			DCCP_BUG("delta (%ld) <= 0", (long)delta);
 		else
-			hcrx->ccid3hcrx_x_recv =
-				scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
+			hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 		break;
 	default:
 		return;
 	}
 
 	ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta,
-		       hcrx->ccid3hcrx_x_recv, hcrx->ccid3hcrx_pinv);
+		       hc->rx_x_recv, hc->rx_pinv);
 
-	hcrx->ccid3hcrx_tstamp_last_feedback = now;
-	hcrx->ccid3hcrx_last_counter	     = dccp_hdr(skb)->dccph_ccval;
-	hcrx->ccid3hcrx_bytes_recv	     = 0;
+	hc->rx_tstamp_last_feedback = now;
+	hc->rx_last_counter	    = dccp_hdr(skb)->dccph_ccval;
+	hc->rx_bytes_recv	    = 0;
 
 	dp->dccps_hc_rx_insert_options = 1;
 	dccp_send_ack(sk);
@@ -725,19 +701,19 @@
 
 static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb)
 {
-	const struct ccid3_hc_rx_sock *hcrx;
+	const struct ccid3_hc_rx_sock *hc;
 	__be32 x_recv, pinv;
 
 	if (!(sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN))
 		return 0;
 
-	hcrx = ccid3_hc_rx_sk(sk);
+	hc = ccid3_hc_rx_sk(sk);
 
 	if (dccp_packet_without_ack(skb))
 		return 0;
 
-	x_recv = htonl(hcrx->ccid3hcrx_x_recv);
-	pinv   = htonl(hcrx->ccid3hcrx_pinv);
+	x_recv = htonl(hc->rx_x_recv);
+	pinv   = htonl(hc->rx_pinv);
 
 	if (dccp_insert_option(sk, skb, TFRC_OPT_LOSS_EVENT_RATE,
 			       &pinv, sizeof(pinv)) ||
@@ -760,26 +736,26 @@
  */
 static u32 ccid3_first_li(struct sock *sk)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	u32 x_recv, p, delta;
 	u64 fval;
 
-	if (hcrx->ccid3hcrx_rtt == 0) {
+	if (hc->rx_rtt == 0) {
 		DCCP_WARN("No RTT estimate available, using fallback RTT\n");
-		hcrx->ccid3hcrx_rtt = DCCP_FALLBACK_RTT;
+		hc->rx_rtt = DCCP_FALLBACK_RTT;
 	}
 
-	delta = ktime_to_us(net_timedelta(hcrx->ccid3hcrx_tstamp_last_feedback));
-	x_recv = scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
+	delta  = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback));
+	x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 	if (x_recv == 0) {		/* would also trigger divide-by-zero */
 		DCCP_WARN("X_recv==0\n");
-		if ((x_recv = hcrx->ccid3hcrx_x_recv) == 0) {
+		if ((x_recv = hc->rx_x_recv) == 0) {
 			DCCP_BUG("stored value of X_recv is zero");
 			return ~0U;
 		}
 	}
 
-	fval = scaled_div(hcrx->ccid3hcrx_s, hcrx->ccid3hcrx_rtt);
+	fval = scaled_div(hc->rx_s, hc->rx_rtt);
 	fval = scaled_div32(fval, x_recv);
 	p = tfrc_calc_x_reverse_lookup(fval);
 
@@ -791,19 +767,19 @@
 
 static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	enum ccid3_fback_type do_feedback = CCID3_FBACK_NONE;
 	const u64 ndp = dccp_sk(sk)->dccps_options_received.dccpor_ndp;
 	const bool is_data_packet = dccp_data_packet(skb);
 
-	if (unlikely(hcrx->ccid3hcrx_state == TFRC_RSTATE_NO_DATA)) {
+	if (unlikely(hc->rx_state == TFRC_RSTATE_NO_DATA)) {
 		if (is_data_packet) {
 			const u32 payload = skb->len - dccp_hdr(skb)->dccph_doff * 4;
 			do_feedback = CCID3_FBACK_INITIAL;
 			ccid3_hc_rx_set_state(sk, TFRC_RSTATE_DATA);
-			hcrx->ccid3hcrx_s = payload;
+			hc->rx_s = payload;
 			/*
-			 * Not necessary to update ccid3hcrx_bytes_recv here,
+			 * Not necessary to update rx_bytes_recv here,
 			 * since X_recv = 0 for the first feedback packet (cf.
 			 * RFC 3448, 6.3) -- gerrit
 			 */
@@ -811,7 +787,7 @@
 		goto update_records;
 	}
 
-	if (tfrc_rx_hist_duplicate(&hcrx->ccid3hcrx_hist, skb))
+	if (tfrc_rx_hist_duplicate(&hc->rx_hist, skb))
 		return; /* done receiving */
 
 	if (is_data_packet) {
@@ -819,20 +795,20 @@
 		/*
 		 * Update moving-average of s and the sum of received payload bytes
 		 */
-		hcrx->ccid3hcrx_s = tfrc_ewma(hcrx->ccid3hcrx_s, payload, 9);
-		hcrx->ccid3hcrx_bytes_recv += payload;
+		hc->rx_s = tfrc_ewma(hc->rx_s, payload, 9);
+		hc->rx_bytes_recv += payload;
 	}
 
 	/*
 	 * Perform loss detection and handle pending losses
 	 */
-	if (tfrc_rx_handle_loss(&hcrx->ccid3hcrx_hist, &hcrx->ccid3hcrx_li_hist,
+	if (tfrc_rx_handle_loss(&hc->rx_hist, &hc->rx_li_hist,
 				skb, ndp, ccid3_first_li, sk)) {
 		do_feedback = CCID3_FBACK_PARAM_CHANGE;
 		goto done_receiving;
 	}
 
-	if (tfrc_rx_hist_loss_pending(&hcrx->ccid3hcrx_hist))
+	if (tfrc_rx_hist_loss_pending(&hc->rx_hist))
 		return; /* done receiving */
 
 	/*
@@ -841,17 +817,17 @@
 	if (unlikely(!is_data_packet))
 		goto update_records;
 
-	if (!tfrc_lh_is_initialised(&hcrx->ccid3hcrx_li_hist)) {
-		const u32 sample = tfrc_rx_hist_sample_rtt(&hcrx->ccid3hcrx_hist, skb);
+	if (!tfrc_lh_is_initialised(&hc->rx_li_hist)) {
+		const u32 sample = tfrc_rx_hist_sample_rtt(&hc->rx_hist, skb);
 		/*
 		 * Empty loss history: no loss so far, hence p stays 0.
 		 * Sample RTT values, since an RTT estimate is required for the
 		 * computation of p when the first loss occurs; RFC 3448, 6.3.1.
 		 */
 		if (sample != 0)
-			hcrx->ccid3hcrx_rtt = tfrc_ewma(hcrx->ccid3hcrx_rtt, sample, 9);
+			hc->rx_rtt = tfrc_ewma(hc->rx_rtt, sample, 9);
 
-	} else if (tfrc_lh_update_i_mean(&hcrx->ccid3hcrx_li_hist, skb)) {
+	} else if (tfrc_lh_update_i_mean(&hc->rx_li_hist, skb)) {
 		/*
 		 * Step (3) of [RFC 3448, 6.1]: Recompute I_mean and, if I_mean
 		 * has decreased (resp. p has increased), send feedback now.
@@ -862,11 +838,11 @@
 	/*
 	 * Check if the periodic once-per-RTT feedback is due; RFC 4342, 10.3
 	 */
-	if (SUB16(dccp_hdr(skb)->dccph_ccval, hcrx->ccid3hcrx_last_counter) > 3)
+	if (SUB16(dccp_hdr(skb)->dccph_ccval, hc->rx_last_counter) > 3)
 		do_feedback = CCID3_FBACK_PERIODIC;
 
 update_records:
-	tfrc_rx_hist_add_packet(&hcrx->ccid3hcrx_hist, skb, ndp);
+	tfrc_rx_hist_add_packet(&hc->rx_hist, skb, ndp);
 
 done_receiving:
 	if (do_feedback)
@@ -875,41 +851,41 @@
 
 static int ccid3_hc_rx_init(struct ccid *ccid, struct sock *sk)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid_priv(ccid);
+	struct ccid3_hc_rx_sock *hc = ccid_priv(ccid);
 
-	hcrx->ccid3hcrx_state = TFRC_RSTATE_NO_DATA;
-	tfrc_lh_init(&hcrx->ccid3hcrx_li_hist);
-	return tfrc_rx_hist_alloc(&hcrx->ccid3hcrx_hist);
+	hc->rx_state = TFRC_RSTATE_NO_DATA;
+	tfrc_lh_init(&hc->rx_li_hist);
+	return tfrc_rx_hist_alloc(&hc->rx_hist);
 }
 
 static void ccid3_hc_rx_exit(struct sock *sk)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 
 	ccid3_hc_rx_set_state(sk, TFRC_RSTATE_TERM);
 
-	tfrc_rx_hist_purge(&hcrx->ccid3hcrx_hist);
-	tfrc_lh_cleanup(&hcrx->ccid3hcrx_li_hist);
+	tfrc_rx_hist_purge(&hc->rx_hist);
+	tfrc_lh_cleanup(&hc->rx_li_hist);
 }
 
 static void ccid3_hc_rx_get_info(struct sock *sk, struct tcp_info *info)
 {
-	const struct ccid3_hc_rx_sock *hcrx;
+	const struct ccid3_hc_rx_sock *hc;
 
 	/* Listen socks doesn't have a private CCID block */
 	if (sk->sk_state == DCCP_LISTEN)
 		return;
 
-	hcrx = ccid3_hc_rx_sk(sk);
-	info->tcpi_ca_state = hcrx->ccid3hcrx_state;
+	hc = ccid3_hc_rx_sk(sk);
+	info->tcpi_ca_state = hc->rx_state;
 	info->tcpi_options  |= TCPI_OPT_TIMESTAMPS;
-	info->tcpi_rcv_rtt  = hcrx->ccid3hcrx_rtt;
+	info->tcpi_rcv_rtt  = hc->rx_rtt;
 }
 
 static int ccid3_hc_rx_getsockopt(struct sock *sk, const int optname, int len,
 				  u32 __user *optval, int __user *optlen)
 {
-	const struct ccid3_hc_rx_sock *hcrx;
+	const struct ccid3_hc_rx_sock *hc;
 	struct tfrc_rx_info rx_info;
 	const void *val;
 
@@ -917,15 +893,15 @@
 	if (sk->sk_state == DCCP_LISTEN)
 		return -EINVAL;
 
-	hcrx = ccid3_hc_rx_sk(sk);
+	hc = ccid3_hc_rx_sk(sk);
 	switch (optname) {
 	case DCCP_SOCKOPT_CCID_RX_INFO:
 		if (len < sizeof(rx_info))
 			return -EINVAL;
-		rx_info.tfrcrx_x_recv = hcrx->ccid3hcrx_x_recv;
-		rx_info.tfrcrx_rtt    = hcrx->ccid3hcrx_rtt;
-		rx_info.tfrcrx_p      = hcrx->ccid3hcrx_pinv == 0 ? ~0U :
-					   scaled_div(1, hcrx->ccid3hcrx_pinv);
+		rx_info.tfrcrx_x_recv = hc->rx_x_recv;
+		rx_info.tfrcrx_rtt    = hc->rx_rtt;
+		rx_info.tfrcrx_p      = hc->rx_pinv == 0 ? ~0U :
+					   scaled_div(1, hc->rx_pinv);
 		len = sizeof(rx_info);
 		val = &rx_info;
 		break;
diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h
index e5a2441..0326357 100644
--- a/net/dccp/ccids/ccid3.h
+++ b/net/dccp/ccids/ccid3.h
@@ -75,44 +75,44 @@
 
 /**
  * struct ccid3_hc_tx_sock - CCID3 sender half-connection socket
- * @ccid3hctx_x - Current sending rate in 64 * bytes per second
- * @ccid3hctx_x_recv - Receive rate    in 64 * bytes per second
- * @ccid3hctx_x_calc - Calculated rate in bytes per second
- * @ccid3hctx_rtt - Estimate of current round trip time in usecs
- * @ccid3hctx_p - Current loss event rate (0-1) scaled by 1000000
- * @ccid3hctx_s - Packet size in bytes
- * @ccid3hctx_t_rto - Nofeedback Timer setting in usecs
- * @ccid3hctx_t_ipi - Interpacket (send) interval (RFC 3448, 4.6) in usecs
- * @ccid3hctx_state - Sender state, one of %ccid3_hc_tx_states
- * @ccid3hctx_last_win_count - Last window counter sent
- * @ccid3hctx_t_last_win_count - Timestamp of earliest packet
- *				 with last_win_count value sent
- * @ccid3hctx_no_feedback_timer - Handle to no feedback timer
- * @ccid3hctx_t_ld - Time last doubled during slow start
- * @ccid3hctx_t_nom - Nominal send time of next packet
- * @ccid3hctx_delta - Send timer delta (RFC 3448, 4.6) in usecs
- * @ccid3hctx_hist - Packet history
- * @ccid3hctx_options_received - Parsed set of retrieved options
+ * @tx_x:		  Current sending rate in 64 * bytes per second
+ * @tx_x_recv:		  Receive rate in 64 * bytes per second
+ * @tx_x_calc:		  Calculated rate in bytes per second
+ * @tx_rtt:		  Estimate of current round trip time in usecs
+ * @tx_p:		  Current loss event rate (0-1) scaled by 1000000
+ * @tx_s:		  Packet size in bytes
+ * @tx_t_rto:		  Nofeedback Timer setting in usecs
+ * @tx_t_ipi:		  Interpacket (send) interval (RFC 3448, 4.6) in usecs
+ * @tx_state:		  Sender state, one of %ccid3_hc_tx_states
+ * @tx_last_win_count:	  Last window counter sent
+ * @tx_t_last_win_count:  Timestamp of earliest packet
+ *			  with last_win_count value sent
+ * @tx_no_feedback_timer: Handle to no feedback timer
+ * @tx_t_ld:		  Time last doubled during slow start
+ * @tx_t_nom:		  Nominal send time of next packet
+ * @tx_delta:		  Send timer delta (RFC 3448, 4.6) in usecs
+ * @tx_hist:		  Packet history
+ * @tx_options_received:  Parsed set of retrieved options
  */
 struct ccid3_hc_tx_sock {
-	struct tfrc_tx_info		ccid3hctx_tfrc;
-#define ccid3hctx_x			ccid3hctx_tfrc.tfrctx_x
-#define ccid3hctx_x_recv		ccid3hctx_tfrc.tfrctx_x_recv
-#define ccid3hctx_x_calc		ccid3hctx_tfrc.tfrctx_x_calc
-#define ccid3hctx_rtt			ccid3hctx_tfrc.tfrctx_rtt
-#define ccid3hctx_p			ccid3hctx_tfrc.tfrctx_p
-#define ccid3hctx_t_rto			ccid3hctx_tfrc.tfrctx_rto
-#define ccid3hctx_t_ipi			ccid3hctx_tfrc.tfrctx_ipi
-	u16				ccid3hctx_s;
-	enum ccid3_hc_tx_states		ccid3hctx_state:8;
-	u8				ccid3hctx_last_win_count;
-	ktime_t				ccid3hctx_t_last_win_count;
-	struct timer_list		ccid3hctx_no_feedback_timer;
-	ktime_t				ccid3hctx_t_ld;
-	ktime_t				ccid3hctx_t_nom;
-	u32				ccid3hctx_delta;
-	struct tfrc_tx_hist_entry	*ccid3hctx_hist;
-	struct ccid3_options_received	ccid3hctx_options_received;
+	struct tfrc_tx_info		tx_tfrc;
+#define tx_x				tx_tfrc.tfrctx_x
+#define tx_x_recv			tx_tfrc.tfrctx_x_recv
+#define tx_x_calc			tx_tfrc.tfrctx_x_calc
+#define tx_rtt				tx_tfrc.tfrctx_rtt
+#define tx_p				tx_tfrc.tfrctx_p
+#define tx_t_rto			tx_tfrc.tfrctx_rto
+#define tx_t_ipi			tx_tfrc.tfrctx_ipi
+	u16				tx_s;
+	enum ccid3_hc_tx_states		tx_state:8;
+	u8				tx_last_win_count;
+	ktime_t				tx_t_last_win_count;
+	struct timer_list		tx_no_feedback_timer;
+	ktime_t				tx_t_ld;
+	ktime_t				tx_t_nom;
+	u32				tx_delta;
+	struct tfrc_tx_hist_entry	*tx_hist;
+	struct ccid3_options_received	tx_options_received;
 };
 
 static inline struct ccid3_hc_tx_sock *ccid3_hc_tx_sk(const struct sock *sk)
@@ -131,32 +131,32 @@
 
 /**
  * struct ccid3_hc_rx_sock - CCID3 receiver half-connection socket
- * @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448 4.3)
- * @ccid3hcrx_rtt  -  Receiver estimate of rtt (non-standard)
- * @ccid3hcrx_p  -  Current loss event rate (RFC 3448 5.4)
- * @ccid3hcrx_last_counter  -  Tracks window counter (RFC 4342, 8.1)
- * @ccid3hcrx_state  -  Receiver state, one of %ccid3_hc_rx_states
- * @ccid3hcrx_bytes_recv  -  Total sum of DCCP payload bytes
- * @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448, sec. 4.3)
- * @ccid3hcrx_rtt  -  Receiver estimate of RTT
- * @ccid3hcrx_tstamp_last_feedback  -  Time at which last feedback was sent
- * @ccid3hcrx_tstamp_last_ack  -  Time at which last feedback was sent
- * @ccid3hcrx_hist  -  Packet history (loss detection + RTT sampling)
- * @ccid3hcrx_li_hist  -  Loss Interval database
- * @ccid3hcrx_s  -  Received packet size in bytes
- * @ccid3hcrx_pinv  -  Inverse of Loss Event Rate (RFC 4342, sec. 8.5)
+ * @rx_x_recv:		     Receiver estimate of send rate (RFC 3448 4.3)
+ * @rx_rtt:		     Receiver estimate of rtt (non-standard)
+ * @rx_p:		     Current loss event rate (RFC 3448 5.4)
+ * @rx_last_counter:	     Tracks window counter (RFC 4342, 8.1)
+ * @rx_state:		     Receiver state, one of %ccid3_hc_rx_states
+ * @rx_bytes_recv:	     Total sum of DCCP payload bytes
+ * @rx_x_recv:		     Receiver estimate of send rate (RFC 3448, sec. 4.3)
+ * @rx_rtt:		     Receiver estimate of RTT
+ * @rx_tstamp_last_feedback: Time at which last feedback was sent
+ * @rx_tstamp_last_ack:	     Time at which last feedback was sent
+ * @rx_hist:		     Packet history (loss detection + RTT sampling)
+ * @rx_li_hist:		     Loss Interval database
+ * @rx_s:		     Received packet size in bytes
+ * @rx_pinv:		     Inverse of Loss Event Rate (RFC 4342, sec. 8.5)
  */
 struct ccid3_hc_rx_sock {
-	u8				ccid3hcrx_last_counter:4;
-	enum ccid3_hc_rx_states		ccid3hcrx_state:8;
-	u32				ccid3hcrx_bytes_recv;
-	u32				ccid3hcrx_x_recv;
-	u32				ccid3hcrx_rtt;
-	ktime_t				ccid3hcrx_tstamp_last_feedback;
-	struct tfrc_rx_hist		ccid3hcrx_hist;
-	struct tfrc_loss_hist		ccid3hcrx_li_hist;
-	u16				ccid3hcrx_s;
-#define ccid3hcrx_pinv			ccid3hcrx_li_hist.i_mean
+	u8				rx_last_counter:4;
+	enum ccid3_hc_rx_states		rx_state:8;
+	u32				rx_bytes_recv;
+	u32				rx_x_recv;
+	u32				rx_rtt;
+	ktime_t				rx_tstamp_last_feedback;
+	struct tfrc_rx_hist		rx_hist;
+	struct tfrc_loss_hist		rx_li_hist;
+	u16				rx_s;
+#define rx_pinv				rx_li_hist.i_mean
 };
 
 static inline struct ccid3_hc_rx_sock *ccid3_hc_rx_sk(const struct sock *sk)
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 7302e14..efbcfdc 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -62,10 +62,10 @@
 		nexthop = inet->opt->faddr;
 	}
 
-	tmp = ip_route_connect(&rt, nexthop, inet->saddr,
+	tmp = ip_route_connect(&rt, nexthop, inet->inet_saddr,
 			       RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
 			       IPPROTO_DCCP,
-			       inet->sport, usin->sin_port, sk, 1);
+			       inet->inet_sport, usin->sin_port, sk, 1);
 	if (tmp < 0)
 		return tmp;
 
@@ -77,12 +77,12 @@
 	if (inet->opt == NULL || !inet->opt->srr)
 		daddr = rt->rt_dst;
 
-	if (inet->saddr == 0)
-		inet->saddr = rt->rt_src;
-	inet->rcv_saddr = inet->saddr;
+	if (inet->inet_saddr == 0)
+		inet->inet_saddr = rt->rt_src;
+	inet->inet_rcv_saddr = inet->inet_saddr;
 
-	inet->dport = usin->sin_port;
-	inet->daddr = daddr;
+	inet->inet_dport = usin->sin_port;
+	inet->inet_daddr = daddr;
 
 	inet_csk(sk)->icsk_ext_hdr_len = 0;
 	if (inet->opt != NULL)
@@ -98,17 +98,19 @@
 	if (err != 0)
 		goto failure;
 
-	err = ip_route_newports(&rt, IPPROTO_DCCP, inet->sport, inet->dport,
-				sk);
+	err = ip_route_newports(&rt, IPPROTO_DCCP, inet->inet_sport,
+				inet->inet_dport, sk);
 	if (err != 0)
 		goto failure;
 
 	/* OK, now commit destination to socket.  */
 	sk_setup_caps(sk, &rt->u.dst);
 
-	dp->dccps_iss = secure_dccp_sequence_number(inet->saddr, inet->daddr,
-						    inet->sport, inet->dport);
-	inet->id = dp->dccps_iss ^ jiffies;
+	dp->dccps_iss = secure_dccp_sequence_number(inet->inet_saddr,
+						    inet->inet_daddr,
+						    inet->inet_sport,
+						    inet->inet_dport);
+	inet->inet_id = dp->dccps_iss ^ jiffies;
 
 	err = dccp_connect(sk);
 	rt = NULL;
@@ -123,7 +125,7 @@
 	dccp_set_state(sk, DCCP_CLOSED);
 	ip_rt_put(rt);
 	sk->sk_route_caps = 0;
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	goto out;
 }
 
@@ -352,7 +354,9 @@
 	struct dccp_hdr *dh = dccp_hdr(skb);
 
 	dccp_csum_outgoing(skb);
-	dh->dccph_checksum = dccp_v4_csum_finish(skb, inet->saddr, inet->daddr);
+	dh->dccph_checksum = dccp_v4_csum_finish(skb,
+						 inet->inet_saddr,
+						 inet->inet_daddr);
 }
 
 EXPORT_SYMBOL_GPL(dccp_v4_send_check);
@@ -393,14 +397,14 @@
 
 	newinet		   = inet_sk(newsk);
 	ireq		   = inet_rsk(req);
-	newinet->daddr	   = ireq->rmt_addr;
-	newinet->rcv_saddr = ireq->loc_addr;
-	newinet->saddr	   = ireq->loc_addr;
+	newinet->inet_daddr	= ireq->rmt_addr;
+	newinet->inet_rcv_saddr = ireq->loc_addr;
+	newinet->inet_saddr	= ireq->loc_addr;
 	newinet->opt	   = ireq->opt;
 	ireq->opt	   = NULL;
 	newinet->mc_index  = inet_iif(skb);
 	newinet->mc_ttl	   = ip_hdr(skb)->ttl;
-	newinet->id	   = jiffies;
+	newinet->inet_id   = jiffies;
 
 	dccp_sync_mss(newsk, dst_mtu(dst));
 
@@ -473,7 +477,8 @@
 	return &rt->u.dst;
 }
 
-static int dccp_v4_send_response(struct sock *sk, struct request_sock *req)
+static int dccp_v4_send_response(struct sock *sk, struct request_sock *req,
+				 struct request_values *rv_unused)
 {
 	int err = -1;
 	struct sk_buff *skb;
@@ -622,7 +627,7 @@
 	dreq->dreq_iss	   = dccp_v4_init_sequence(skb);
 	dreq->dreq_service = service;
 
-	if (dccp_v4_send_response(sk, req))
+	if (dccp_v4_send_response(sk, req, NULL))
 		goto drop_and_free;
 
 	inet_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
@@ -987,7 +992,6 @@
 	.protocol	= IPPROTO_DCCP,
 	.prot		= &dccp_v4_prot,
 	.ops		= &inet_dccp_ops,
-	.capability	= -1,
 	.no_check	= 0,
 	.flags		= INET_PROTOSW_ICSK,
 };
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index e48ca5d..6574215 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -158,8 +158,8 @@
 			ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
 			ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 			fl.oif = sk->sk_bound_dev_if;
-			fl.fl_ip_dport = inet->dport;
-			fl.fl_ip_sport = inet->sport;
+			fl.fl_ip_dport = inet->inet_dport;
+			fl.fl_ip_sport = inet->inet_sport;
 			security_sk_classify_flow(sk, &fl);
 
 			err = ip6_dst_lookup(sk, &dst, &fl);
@@ -241,7 +241,8 @@
 }
 
 
-static int dccp_v6_send_response(struct sock *sk, struct request_sock *req)
+static int dccp_v6_send_response(struct sock *sk, struct request_sock *req,
+				 struct request_values *rv_unused)
 {
 	struct inet6_request_sock *ireq6 = inet6_rsk(req);
 	struct ipv6_pinfo *np = inet6_sk(sk);
@@ -468,7 +469,7 @@
 	dreq->dreq_iss	   = dccp_v6_init_sequence(skb);
 	dreq->dreq_service = service;
 
-	if (dccp_v6_send_response(sk, req))
+	if (dccp_v6_send_response(sk, req, NULL))
 		goto drop_and_free;
 
 	inet6_csk_reqsk_queue_hash_add(sk, req, DCCP_TIMEOUT_INIT);
@@ -510,11 +511,9 @@
 
 		memcpy(newnp, np, sizeof(struct ipv6_pinfo));
 
-		ipv6_addr_set(&newnp->daddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->daddr);
+		ipv6_addr_set_v4mapped(newinet->inet_daddr, &newnp->daddr);
 
-		ipv6_addr_set(&newnp->saddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->saddr);
+		ipv6_addr_set_v4mapped(newinet->inet_saddr, &newnp->saddr);
 
 		ipv6_addr_copy(&newnp->rcv_saddr, &newnp->saddr);
 
@@ -642,7 +641,8 @@
 
 	dccp_sync_mss(newsk, dst_mtu(dst));
 
-	newinet->daddr = newinet->saddr = newinet->rcv_saddr = LOOPBACK4_IPV6;
+	newinet->inet_daddr = newinet->inet_saddr = LOOPBACK4_IPV6;
+	newinet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 	__inet6_hash(newsk);
 	__inet_inherit_port(sk, newsk);
@@ -970,12 +970,9 @@
 			icsk->icsk_af_ops = &dccp_ipv6_af_ops;
 			sk->sk_backlog_rcv = dccp_v6_do_rcv;
 			goto failure;
-		} else {
-			ipv6_addr_set(&np->saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->saddr);
-			ipv6_addr_set(&np->rcv_saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->rcv_saddr);
 		}
+		ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
+		ipv6_addr_set_v4mapped(inet->inet_rcv_saddr, &np->rcv_saddr);
 
 		return err;
 	}
@@ -988,7 +985,7 @@
 	ipv6_addr_copy(&fl.fl6_src, saddr ? saddr : &np->saddr);
 	fl.oif = sk->sk_bound_dev_if;
 	fl.fl_ip_dport = usin->sin6_port;
-	fl.fl_ip_sport = inet->sport;
+	fl.fl_ip_sport = inet->inet_sport;
 	security_sk_classify_flow(sk, &fl);
 
 	if (np->opt != NULL && np->opt->srcrt != NULL) {
@@ -1021,7 +1018,7 @@
 
 	/* set the source address */
 	ipv6_addr_copy(&np->saddr, saddr);
-	inet->rcv_saddr = LOOPBACK4_IPV6;
+	inet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 	__ip6_dst_store(sk, dst, NULL, NULL);
 
@@ -1030,7 +1027,7 @@
 		icsk->icsk_ext_hdr_len = (np->opt->opt_flen +
 					  np->opt->opt_nflen);
 
-	inet->dport = usin->sin6_port;
+	inet->inet_dport = usin->sin6_port;
 
 	dccp_set_state(sk, DCCP_REQUESTING);
 	err = inet6_hash_connect(&dccp_death_row, sk);
@@ -1039,7 +1036,8 @@
 
 	dp->dccps_iss = secure_dccpv6_sequence_number(np->saddr.s6_addr32,
 						      np->daddr.s6_addr32,
-						      inet->sport, inet->dport);
+						      inet->inet_sport,
+						      inet->inet_dport);
 	err = dccp_connect(sk);
 	if (err)
 		goto late_failure;
@@ -1050,7 +1048,7 @@
 	dccp_set_state(sk, DCCP_CLOSED);
 	__sk_dst_reset(sk);
 failure:
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	sk->sk_route_caps = 0;
 	return err;
 }
@@ -1188,7 +1186,6 @@
 	.protocol	= IPPROTO_DCCP,
 	.prot		= &dccp_v6_prot,
 	.ops		= &inet6_dccp_ops,
-	.capability	= -1,
 	.flags		= INET_PROTOSW_ICSK,
 };
 
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index 5ca49ce..af226a0 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -184,7 +184,7 @@
 			 * counter (backoff, monitored by dccp_response_timer).
 			 */
 			req->retrans++;
-			req->rsk_ops->rtx_syn_ack(sk, req);
+			req->rsk_ops->rtx_syn_ack(sk, req, NULL);
 		}
 		/* Network Duplicate, discard packet */
 		return NULL;
diff --git a/net/dccp/output.c b/net/dccp/output.c
index c96119f..d6bb753 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -99,8 +99,8 @@
 		/* Build DCCP header and checksum it. */
 		dh = dccp_zeroed_hdr(skb, dccp_header_size);
 		dh->dccph_type	= dcb->dccpd_type;
-		dh->dccph_sport	= inet->sport;
-		dh->dccph_dport	= inet->dport;
+		dh->dccph_sport	= inet->inet_sport;
+		dh->dccph_dport	= inet->inet_dport;
 		dh->dccph_doff	= (dccp_header_size + dcb->dccpd_opt_len) / 4;
 		dh->dccph_ccval	= dcb->dccpd_ccval;
 		dh->dccph_cscov = dp->dccps_pcslen;
diff --git a/net/dccp/probe.c b/net/dccp/probe.c
index 37731da..dc32842 100644
--- a/net/dccp/probe.c
+++ b/net/dccp/probe.c
@@ -75,26 +75,25 @@
 			 struct msghdr *msg, size_t size)
 {
 	const struct inet_sock *inet = inet_sk(sk);
-	struct ccid3_hc_tx_sock *hctx = NULL;
+	struct ccid3_hc_tx_sock *hc = NULL;
 
 	if (ccid_get_current_tx_ccid(dccp_sk(sk)) == DCCPC_CCID3)
-		hctx = ccid3_hc_tx_sk(sk);
+		hc = ccid3_hc_tx_sk(sk);
 
-	if (port == 0 || ntohs(inet->dport) == port ||
-	    ntohs(inet->sport) == port) {
-		if (hctx)
-			printl("%pI4:%u %pI4:%u %d %d %d %d %u "
-			       "%llu %llu %d\n",
-			       &inet->saddr, ntohs(inet->sport),
-			       &inet->daddr, ntohs(inet->dport), size,
-			       hctx->ccid3hctx_s, hctx->ccid3hctx_rtt,
-			       hctx->ccid3hctx_p, hctx->ccid3hctx_x_calc,
-			       hctx->ccid3hctx_x_recv >> 6,
-			       hctx->ccid3hctx_x >> 6, hctx->ccid3hctx_t_ipi);
+	if (port == 0 || ntohs(inet->inet_dport) == port ||
+	    ntohs(inet->inet_sport) == port) {
+		if (hc)
+			printl("%pI4:%u %pI4:%u %d %d %d %d %u %llu %llu %d\n",
+			       &inet->inet_saddr, ntohs(inet->inet_sport),
+			       &inet->inet_daddr, ntohs(inet->inet_dport), size,
+			       hc->tx_s, hc->tx_rtt, hc->tx_p,
+			       hc->tx_x_calc, hc->tx_x_recv >> 6,
+			       hc->tx_x >> 6, hc->tx_t_ipi);
 		else
 			printl("%pI4:%u %pI4:%u %d\n",
-			       &inet->saddr, ntohs(inet->sport),
-			       &inet->daddr, ntohs(inet->dport), size);
+			       &inet->inet_saddr, ntohs(inet->inet_sport),
+			       &inet->inet_daddr, ntohs(inet->inet_dport),
+			       size);
 	}
 
 	jprobe_return();
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index a156319..671cd14 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -278,7 +278,7 @@
 		sk->sk_send_head = NULL;
 	}
 
-	inet->dport = 0;
+	inet->inet_dport = 0;
 
 	if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
 		inet_reset_saddr(sk);
@@ -290,7 +290,7 @@
 	inet_csk_delack_init(sk);
 	__sk_dst_reset(sk);
 
-	WARN_ON(inet->num && !icsk->icsk_bind_hash);
+	WARN_ON(inet->inet_num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
@@ -1060,11 +1060,12 @@
 	for (ehash_order = 0; (1UL << ehash_order) < goal; ehash_order++)
 		;
 	do {
-		dccp_hashinfo.ehash_size = (1UL << ehash_order) * PAGE_SIZE /
+		unsigned long hash_size = (1UL << ehash_order) * PAGE_SIZE /
 					sizeof(struct inet_ehash_bucket);
-		while (dccp_hashinfo.ehash_size &
-		       (dccp_hashinfo.ehash_size - 1))
-			dccp_hashinfo.ehash_size--;
+
+		while (hash_size & (hash_size - 1))
+			hash_size--;
+		dccp_hashinfo.ehash_mask = hash_size - 1;
 		dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
 			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
 	} while (!dccp_hashinfo.ehash && --ehash_order > 0);
@@ -1074,7 +1075,7 @@
 		goto out_free_bind_bucket_cachep;
 	}
 
-	for (i = 0; i < dccp_hashinfo.ehash_size; i++) {
+	for (i = 0; i <= dccp_hashinfo.ehash_mask; i++) {
 		INIT_HLIST_NULLS_HEAD(&dccp_hashinfo.ehash[i].chain, i);
 		INIT_HLIST_NULLS_HEAD(&dccp_hashinfo.ehash[i].twchain, i);
 	}
@@ -1153,7 +1154,7 @@
 		   get_order(dccp_hashinfo.bhash_size *
 			     sizeof(struct inet_bind_hashbucket)));
 	free_pages((unsigned long)dccp_hashinfo.ehash,
-		   get_order(dccp_hashinfo.ehash_size *
+		   get_order((dccp_hashinfo.ehash_mask + 1) *
 			     sizeof(struct inet_ehash_bucket)));
 	inet_ehash_locks_free(&dccp_hashinfo);
 	kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
diff --git a/net/dccp/sysctl.c b/net/dccp/sysctl.c
index a5a1856..5639438 100644
--- a/net/dccp/sysctl.c
+++ b/net/dccp/sysctl.c
@@ -93,13 +93,13 @@
 		.proc_handler	= proc_dointvec_ms_jiffies,
 	},
 
-	{ .ctl_name = 0, }
+	{ }
 };
 
 static struct ctl_path dccp_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "dccp", .ctl_name = NET_DCCP, },
-	{ .procname = "default", .ctl_name = NET_DCCP_DEFAULT, },
+	{ .procname = "net", },
+	{ .procname = "dccp", },
+	{ .procname = "default", },
 	{ }
 };
 
diff --git a/net/dccp/timer.c b/net/dccp/timer.c
index 162d1e6..bbfeb5e 100644
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -38,7 +38,7 @@
 
 	if (sk->sk_state == DCCP_REQUESTING || sk->sk_state == DCCP_PARTOPEN) {
 		if (icsk->icsk_retransmits != 0)
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		retry_until = icsk->icsk_syn_retries ?
 			    : sysctl_dccp_request_retries;
 	} else {
@@ -63,7 +63,7 @@
 			   Golden words :-).
 		   */
 
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		}
 
 		retry_until = sysctl_dccp_retries2;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 7a58c87..2b494fa 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -675,11 +675,12 @@
 
 
 
-static int dn_create(struct net *net, struct socket *sock, int protocol)
+static int dn_create(struct net *net, struct socket *sock, int protocol,
+		     int kern)
 {
 	struct sock *sk;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	switch(sock->type) {
@@ -749,9 +750,9 @@
 
 	if (!(saddr->sdn_flags & SDF_WILD)) {
 		if (le16_to_cpu(saddr->sdn_nodeaddrl)) {
-			read_lock(&dev_base_lock);
+			rcu_read_lock();
 			ldev = NULL;
-			for_each_netdev(&init_net, dev) {
+			for_each_netdev_rcu(&init_net, dev) {
 				if (!dev->dn_ptr)
 					continue;
 				if (dn_dev_islocal(dev, dn_saddr2dn(saddr))) {
@@ -759,7 +760,7 @@
 					break;
 				}
 			}
-			read_unlock(&dev_base_lock);
+			rcu_read_unlock();
 			if (ldev == NULL)
 				return -EADDRNOTAVAIL;
 		}
@@ -1955,7 +1956,7 @@
 	}
 
 	if ((flags & MSG_TRYHARD) && sk->sk_dst_cache)
-		dst_negative_advice(&sk->sk_dst_cache);
+		dst_negative_advice(&sk->sk_dst_cache, sk);
 
 	mss = scp->segsize_rem;
 	fctype = scp->services_rem & NSP_FC_MASK;
@@ -2325,7 +2326,7 @@
 };
 #endif
 
-static struct net_proto_family	dn_family_ops = {
+static const struct net_proto_family	dn_family_ops = {
 	.family =	AF_DECnet,
 	.create =	dn_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 6e1f085..238af09 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -68,7 +68,7 @@
  */
 __le16 decnet_address = 0;
 
-static DEFINE_RWLOCK(dndev_lock);
+static DEFINE_SPINLOCK(dndev_lock);
 static struct net_device *decnet_default_device;
 static BLOCKING_NOTIFIER_HEAD(dnaddr_chain);
 
@@ -89,7 +89,6 @@
 	.t2 =		1,
 	.t3 =		10,
 	.name =		"ethernet",
-	.ctl_name =	NET_DECNET_CONF_ETHER,
 	.up =		dn_eth_up,
 	.down = 	dn_eth_down,
 	.timer3 =	dn_send_brd_hello,
@@ -101,7 +100,6 @@
 	.t2 =		1,
 	.t3 =		10,
 	.name =		"ipgre",
-	.ctl_name =	NET_DECNET_CONF_GRE,
 	.timer3 =	dn_send_brd_hello,
 },
 #if 0
@@ -112,7 +110,6 @@
 	.t2 =		1,
 	.t3 =		120,
 	.name =		"x25",
-	.ctl_name =	NET_DECNET_CONF_X25,
 	.timer3 =	dn_send_ptp_hello,
 },
 #endif
@@ -124,7 +121,6 @@
 	.t2 =		1,
 	.t3 =		10,
 	.name =		"ppp",
-	.ctl_name =	NET_DECNET_CONF_PPP,
 	.timer3 =	dn_send_brd_hello,
 },
 #endif
@@ -135,7 +131,6 @@
 	.t2 =		1,
 	.t3 =		120,
 	.name =		"ddcmp",
-	.ctl_name =	NET_DECNET_CONF_DDCMP,
 	.timer3 =	dn_send_ptp_hello,
 },
 {
@@ -145,7 +140,6 @@
 	.t2 =		1,
 	.t3 =		10,
 	.name =		"loopback",
-	.ctl_name =	NET_DECNET_CONF_LOOPBACK,
 	.timer3 =	dn_send_brd_hello,
 }
 };
@@ -166,10 +160,6 @@
 
 static int dn_forwarding_proc(ctl_table *, int,
 			void __user *, size_t *, loff_t *);
-static int dn_forwarding_sysctl(ctl_table *table,
-			void __user *oldval, size_t __user *oldlenp,
-			void __user *newval, size_t newlen);
-
 static struct dn_dev_sysctl_table {
 	struct ctl_table_header *sysctl_header;
 	ctl_table dn_dev_vars[5];
@@ -177,44 +167,36 @@
 	NULL,
 	{
 	{
-		.ctl_name = NET_DECNET_CONF_DEV_FORWARDING,
 		.procname = "forwarding",
 		.data = (void *)DN_DEV_PARMS_OFFSET(forwarding),
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = dn_forwarding_proc,
-		.strategy = dn_forwarding_sysctl,
 	},
 	{
-		.ctl_name = NET_DECNET_CONF_DEV_PRIORITY,
 		.procname = "priority",
 		.data = (void *)DN_DEV_PARMS_OFFSET(priority),
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_priority,
 		.extra2 = &max_priority
 	},
 	{
-		.ctl_name = NET_DECNET_CONF_DEV_T2,
 		.procname = "t2",
 		.data = (void *)DN_DEV_PARMS_OFFSET(t2),
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_t2,
 		.extra2 = &max_t2
 	},
 	{
-		.ctl_name = NET_DECNET_CONF_DEV_T3,
 		.procname = "t3",
 		.data = (void *)DN_DEV_PARMS_OFFSET(t3),
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_t3,
 		.extra2 = &max_t3
 	},
@@ -230,9 +212,9 @@
 #define DN_CTL_PATH_DEV	3
 
 	struct ctl_path dn_ctl_path[] = {
-		{ .procname = "net", .ctl_name = CTL_NET, },
-		{ .procname = "decnet", .ctl_name = NET_DECNET, },
-		{ .procname = "conf", .ctl_name = NET_DECNET_CONF, },
+		{ .procname = "net",  },
+		{ .procname = "decnet",  },
+		{ .procname = "conf",  },
 		{ /* to be set */ },
 		{ },
 	};
@@ -248,10 +230,8 @@
 
 	if (dev) {
 		dn_ctl_path[DN_CTL_PATH_DEV].procname = dev->name;
-		dn_ctl_path[DN_CTL_PATH_DEV].ctl_name = dev->ifindex;
 	} else {
 		dn_ctl_path[DN_CTL_PATH_DEV].procname = parms->name;
-		dn_ctl_path[DN_CTL_PATH_DEV].ctl_name = parms->ctl_name;
 	}
 
 	t->dn_dev_vars[0].extra1 = (void *)dev;
@@ -317,44 +297,6 @@
 #endif
 }
 
-static int dn_forwarding_sysctl(ctl_table *table,
-			void __user *oldval, size_t __user *oldlenp,
-			void __user *newval, size_t newlen)
-{
-#ifdef CONFIG_DECNET_ROUTER
-	struct net_device *dev = table->extra1;
-	struct dn_dev *dn_db;
-	int value;
-
-	if (table->extra1 == NULL)
-		return -EINVAL;
-
-	dn_db = dev->dn_ptr;
-
-	if (newval && newlen) {
-		if (newlen != sizeof(int))
-			return -EINVAL;
-
-		if (get_user(value, (int __user *)newval))
-			return -EFAULT;
-		if (value < 0)
-			return -EINVAL;
-		if (value > 2)
-			return -EINVAL;
-
-		if (dn_db->parms.down)
-			dn_db->parms.down(dev);
-		dn_db->parms.forwarding = value;
-		if (dn_db->parms.up)
-			dn_db->parms.up(dev);
-	}
-
-	return 0;
-#else
-	return -EINVAL;
-#endif
-}
-
 #else /* CONFIG_SYSCTL */
 static void dn_dev_sysctl_unregister(struct dn_dev_parms *parms)
 {
@@ -557,7 +499,8 @@
 struct net_device *dn_dev_get_default(void)
 {
 	struct net_device *dev;
-	read_lock(&dndev_lock);
+
+	spin_lock(&dndev_lock);
 	dev = decnet_default_device;
 	if (dev) {
 		if (dev->dn_ptr)
@@ -565,7 +508,8 @@
 		else
 			dev = NULL;
 	}
-	read_unlock(&dndev_lock);
+	spin_unlock(&dndev_lock);
+
 	return dev;
 }
 
@@ -575,13 +519,15 @@
 	int rv = -EBUSY;
 	if (!dev->dn_ptr)
 		return -ENODEV;
-	write_lock(&dndev_lock);
+
+	spin_lock(&dndev_lock);
 	if (force || decnet_default_device == NULL) {
 		old = decnet_default_device;
 		decnet_default_device = dev;
 		rv = 0;
 	}
-	write_unlock(&dndev_lock);
+	spin_unlock(&dndev_lock);
+
 	if (old)
 		dev_put(old);
 	return rv;
@@ -589,26 +535,29 @@
 
 static void dn_dev_check_default(struct net_device *dev)
 {
-	write_lock(&dndev_lock);
+	spin_lock(&dndev_lock);
 	if (dev == decnet_default_device) {
 		decnet_default_device = NULL;
 	} else {
 		dev = NULL;
 	}
-	write_unlock(&dndev_lock);
+	spin_unlock(&dndev_lock);
+
 	if (dev)
 		dev_put(dev);
 }
 
+/*
+ * Called with RTNL
+ */
 static struct dn_dev *dn_dev_by_index(int ifindex)
 {
 	struct net_device *dev;
 	struct dn_dev *dn_dev = NULL;
-	dev = dev_get_by_index(&init_net, ifindex);
-	if (dev) {
+
+	dev = __dev_get_by_index(&init_net, ifindex);
+	if (dev)
 		dn_dev = dev->dn_ptr;
-		dev_put(dev);
-	}
 
 	return dn_dev;
 }
@@ -629,7 +578,7 @@
 	struct dn_ifaddr *ifa, **ifap;
 	int err = -EINVAL;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		goto errout;
 
 	err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, dn_ifa_policy);
@@ -668,7 +617,7 @@
 	struct dn_ifaddr *ifa;
 	int err;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFA_MAX, dn_ifa_policy);
@@ -782,7 +731,7 @@
 	struct dn_dev *dn_db;
 	struct dn_ifaddr *ifa;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	skip_ndevs = cb->args[0];
@@ -826,13 +775,17 @@
 	struct dn_dev *dn_db = (struct dn_dev *)dev->dn_ptr;
 	struct dn_ifaddr *ifa;
 	int rv = -ENODEV;
+
 	if (dn_db == NULL)
 		goto out;
+
+	rtnl_lock();
 	ifa = dn_db->ifa_list;
 	if (ifa != NULL) {
 		*addr = ifa->ifa_local;
 		rv = 0;
 	}
+	rtnl_unlock();
 out:
 	return rv;
 }
@@ -854,9 +807,7 @@
 	dev = dn_dev_get_default();
 last_chance:
 	if (dev) {
-		read_lock(&dev_base_lock);
 		rv = dn_dev_get_first(dev, addr);
-		read_unlock(&dev_base_lock);
 		dev_put(dev);
 		if (rv == 0 || dev == init_net.loopback_dev)
 			return rv;
@@ -1321,18 +1272,18 @@
 }
 
 static void *dn_dev_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(&dev_base_lock)
+	__acquires(rcu)
 {
 	int i;
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 
 	if (*pos == 0)
 		return SEQ_START_TOKEN;
 
 	i = 1;
-	for_each_netdev(&init_net, dev) {
+	for_each_netdev_rcu(&init_net, dev) {
 		if (!is_dn_dev(dev))
 			continue;
 
@@ -1353,7 +1304,7 @@
 	if (v == SEQ_START_TOKEN)
 		dev = net_device_entry(&init_net.dev_base_head);
 
-	for_each_netdev_continue(&init_net, dev) {
+	for_each_netdev_continue_rcu(&init_net, dev) {
 		if (!is_dn_dev(dev))
 			continue;
 
@@ -1364,9 +1315,9 @@
 }
 
 static void dn_dev_seq_stop(struct seq_file *seq, void *v)
-	__releases(&dev_base_lock)
+	__releases(rcu)
 {
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static char *dn_type2asc(char type)
diff --git a/net/decnet/dn_fib.c b/net/decnet/dn_fib.c
index 27ea2e9..e9d4870 100644
--- a/net/decnet/dn_fib.c
+++ b/net/decnet/dn_fib.c
@@ -509,7 +509,7 @@
 	struct rtattr **rta = arg;
 	struct rtmsg *r = NLMSG_DATA(nlh);
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	if (dn_fib_check_attr(r, rta))
@@ -529,7 +529,7 @@
 	struct rtattr **rta = arg;
 	struct rtmsg *r = NLMSG_DATA(nlh);
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	if (dn_fib_check_attr(r, rta))
@@ -607,8 +607,8 @@
 	ASSERT_RTNL();
 
 	/* Scan device list */
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		dn_db = dev->dn_ptr;
 		if (dn_db == NULL)
 			continue;
@@ -619,7 +619,7 @@
 			}
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	if (found_it == 0) {
 		fib_magic(RTM_DELROUTE, RTN_LOCAL, ifa->ifa_local, 16, ifa);
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 57662ca..a032840 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -908,8 +908,8 @@
 			dev_put(dev_out);
 			goto out;
 		}
-		read_lock(&dev_base_lock);
-		for_each_netdev(&init_net, dev) {
+		rcu_read_lock();
+		for_each_netdev_rcu(&init_net, dev) {
 			if (!dev->dn_ptr)
 				continue;
 			if (!dn_dev_islocal(dev, oldflp->fld_src))
@@ -922,7 +922,7 @@
 			dev_out = dev;
 			break;
 		}
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		if (dev_out == NULL)
 			goto out;
 		dev_hold(dev_out);
@@ -1517,7 +1517,7 @@
 	struct sk_buff *skb;
 	struct flowi fl;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	memset(&fl, 0, sizeof(fl));
@@ -1602,7 +1602,7 @@
 	int h, s_h;
 	int idx, s_idx;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	if (NLMSG_PAYLOAD(cb->nlh, 0) < sizeof(struct rtmsg))
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index 72495f2..7466c54 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -33,7 +33,7 @@
 #include <net/dn_dev.h>
 #include <net/dn_route.h>
 
-static struct fib_rules_ops dn_fib_rules_ops;
+static struct fib_rules_ops *dn_fib_rules_ops;
 
 struct dn_fib_rule
 {
@@ -56,7 +56,7 @@
 	};
 	int err;
 
-	err = fib_rules_lookup(&dn_fib_rules_ops, flp, 0, &arg);
+	err = fib_rules_lookup(dn_fib_rules_ops, flp, 0, &arg);
 	res->r = arg.rule;
 
 	return err;
@@ -217,9 +217,9 @@
 	struct list_head *pos;
 	struct fib_rule *rule;
 
-	if (!list_empty(&dn_fib_rules_ops.rules_list)) {
-		pos = dn_fib_rules_ops.rules_list.next;
-		if (pos->next != &dn_fib_rules_ops.rules_list) {
+	if (!list_empty(&dn_fib_rules_ops->rules_list)) {
+		pos = dn_fib_rules_ops->rules_list.next;
+		if (pos->next != &dn_fib_rules_ops->rules_list) {
 			rule = list_entry(pos->next, struct fib_rule, list);
 			if (rule->pref)
 				return rule->pref - 1;
@@ -234,7 +234,7 @@
 	dn_rt_cache_flush(-1);
 }
 
-static struct fib_rules_ops dn_fib_rules_ops = {
+static struct fib_rules_ops dn_fib_rules_ops_template = {
 	.family		= AF_DECnet,
 	.rule_size	= sizeof(struct dn_fib_rule),
 	.addr_size	= sizeof(u16),
@@ -247,21 +247,23 @@
 	.flush_cache	= dn_fib_rule_flush_cache,
 	.nlgroup	= RTNLGRP_DECnet_RULE,
 	.policy		= dn_fib_rule_policy,
-	.rules_list	= LIST_HEAD_INIT(dn_fib_rules_ops.rules_list),
 	.owner		= THIS_MODULE,
 	.fro_net	= &init_net,
 };
 
 void __init dn_fib_rules_init(void)
 {
-	BUG_ON(fib_default_rule_add(&dn_fib_rules_ops, 0x7fff,
+	dn_fib_rules_ops =
+		fib_rules_register(&dn_fib_rules_ops_template, &init_net);
+	BUG_ON(IS_ERR(dn_fib_rules_ops));
+	BUG_ON(fib_default_rule_add(dn_fib_rules_ops, 0x7fff,
 			            RT_TABLE_MAIN, 0));
-	fib_rules_register(&dn_fib_rules_ops);
 }
 
 void __exit dn_fib_rules_cleanup(void)
 {
-	fib_rules_unregister(&dn_fib_rules_ops);
+	fib_rules_unregister(dn_fib_rules_ops);
+	rcu_barrier();
 }
 
 
diff --git a/net/decnet/dn_table.c b/net/decnet/dn_table.c
index 67054b0..b9a33bb 100644
--- a/net/decnet/dn_table.c
+++ b/net/decnet/dn_table.c
@@ -471,7 +471,7 @@
 	struct hlist_node *node;
 	int dumped = 0;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	if (NLMSG_PAYLOAD(cb->nlh, 0) >= sizeof(struct rtmsg) &&
@@ -581,8 +581,9 @@
 		DN_FIB_SCAN_KEY(f, fp, key) {
 			if (fi->fib_priority != DN_FIB_INFO(f)->fib_priority)
 				break;
-			if (f->fn_type == type && f->fn_scope == r->rtm_scope
-					&& DN_FIB_INFO(f) == fi)
+			if (f->fn_type == type &&
+			    f->fn_scope == r->rtm_scope &&
+			    DN_FIB_INFO(f) == fi)
 				goto out;
 		}
 
diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c
index 2036568..be3eb8e 100644
--- a/net/decnet/sysctl_net_decnet.c
+++ b/net/decnet/sysctl_net_decnet.c
@@ -131,39 +131,6 @@
 	return 0;
 }
 
-
-static int dn_node_address_strategy(ctl_table *table,
-				void __user *oldval, size_t __user *oldlenp,
-				void __user *newval, size_t newlen)
-{
-	size_t len;
-	__le16 addr;
-
-	if (oldval && oldlenp) {
-		if (get_user(len, oldlenp))
-			return -EFAULT;
-		if (len) {
-			if (len != sizeof(unsigned short))
-				return -EINVAL;
-			if (put_user(decnet_address, (__le16 __user *)oldval))
-				return -EFAULT;
-		}
-	}
-	if (newval && newlen) {
-		if (newlen != sizeof(unsigned short))
-			return -EINVAL;
-		if (get_user(addr, (__le16 __user *)newval))
-			return -EFAULT;
-
-		dn_dev_devices_off();
-
-		decnet_address = addr;
-
-		dn_dev_devices_on();
-	}
-	return 0;
-}
-
 static int dn_node_address_handler(ctl_table *table, int write,
 				void __user *buffer,
 				size_t *lenp, loff_t *ppos)
@@ -215,64 +182,6 @@
 	return 0;
 }
 
-
-static int dn_def_dev_strategy(ctl_table *table,
-				void __user *oldval, size_t __user *oldlenp,
-				void __user *newval, size_t newlen)
-{
-	size_t len;
-	struct net_device *dev;
-	char devname[17];
-	size_t namel;
-	int rv = 0;
-
-	devname[0] = 0;
-
-	if (oldval && oldlenp) {
-		if (get_user(len, oldlenp))
-			return -EFAULT;
-		if (len) {
-			dev = dn_dev_get_default();
-			if (dev) {
-				strcpy(devname, dev->name);
-				dev_put(dev);
-			}
-
-			namel = strlen(devname) + 1;
-			if (len > namel) len = namel;
-
-			if (copy_to_user(oldval, devname, len))
-				return -EFAULT;
-
-			if (put_user(len, oldlenp))
-				return -EFAULT;
-		}
-	}
-
-	if (newval && newlen) {
-		if (newlen > 16)
-			return -E2BIG;
-
-		if (copy_from_user(devname, newval, newlen))
-			return -EFAULT;
-
-		devname[newlen] = 0;
-
-		dev = dev_get_by_name(&init_net, devname);
-		if (dev == NULL)
-			return -ENODEV;
-
-		rv = -ENODEV;
-		if (dev->dn_ptr != NULL)
-			rv = dn_dev_set_default(dev, 1);
-		if (rv)
-			dev_put(dev);
-	}
-
-	return rv;
-}
-
-
 static int dn_def_dev_handler(ctl_table *table, int write,
 				void __user *buffer,
 				size_t *lenp, loff_t *ppos)
@@ -338,138 +247,112 @@
 
 static ctl_table dn_table[] = {
 	{
-		.ctl_name = NET_DECNET_NODE_ADDRESS,
 		.procname = "node_address",
 		.maxlen = 7,
 		.mode = 0644,
 		.proc_handler = dn_node_address_handler,
-		.strategy = dn_node_address_strategy,
 	},
 	{
-		.ctl_name = NET_DECNET_NODE_NAME,
 		.procname = "node_name",
 		.data = node_name,
 		.maxlen = 7,
 		.mode = 0644,
 		.proc_handler = proc_dostring,
-		.strategy = sysctl_string,
 	},
 	{
-		.ctl_name = NET_DECNET_DEFAULT_DEVICE,
 		.procname = "default_device",
 		.maxlen = 16,
 		.mode = 0644,
 		.proc_handler = dn_def_dev_handler,
-		.strategy = dn_def_dev_strategy,
 	},
 	{
-		.ctl_name = NET_DECNET_TIME_WAIT,
 		.procname = "time_wait",
 		.data = &decnet_time_wait,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_decnet_time_wait,
 		.extra2 = &max_decnet_time_wait
 	},
 	{
-		.ctl_name = NET_DECNET_DN_COUNT,
 		.procname = "dn_count",
 		.data = &decnet_dn_count,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_state_count,
 		.extra2 = &max_state_count
 	},
 	{
-		.ctl_name = NET_DECNET_DI_COUNT,
 		.procname = "di_count",
 		.data = &decnet_di_count,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_state_count,
 		.extra2 = &max_state_count
 	},
 	{
-		.ctl_name = NET_DECNET_DR_COUNT,
 		.procname = "dr_count",
 		.data = &decnet_dr_count,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_state_count,
 		.extra2 = &max_state_count
 	},
 	{
-		.ctl_name = NET_DECNET_DST_GC_INTERVAL,
 		.procname = "dst_gc_interval",
 		.data = &decnet_dst_gc_interval,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_decnet_dst_gc_interval,
 		.extra2 = &max_decnet_dst_gc_interval
 	},
 	{
-		.ctl_name = NET_DECNET_NO_FC_MAX_CWND,
 		.procname = "no_fc_max_cwnd",
 		.data = &decnet_no_fc_max_cwnd,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec_minmax,
-		.strategy = sysctl_intvec,
 		.extra1 = &min_decnet_no_fc_max_cwnd,
 		.extra2 = &max_decnet_no_fc_max_cwnd
 	},
        {
-		.ctl_name = NET_DECNET_MEM,
 		.procname = "decnet_mem",
 		.data = &sysctl_decnet_mem,
 		.maxlen = sizeof(sysctl_decnet_mem),
 		.mode = 0644,
 		.proc_handler = proc_dointvec,
-		.strategy = sysctl_intvec,
 	},
 	{
-		.ctl_name = NET_DECNET_RMEM,
 		.procname = "decnet_rmem",
 		.data = &sysctl_decnet_rmem,
 		.maxlen = sizeof(sysctl_decnet_rmem),
 		.mode = 0644,
 		.proc_handler = proc_dointvec,
-		.strategy = sysctl_intvec,
 	},
 	{
-		.ctl_name = NET_DECNET_WMEM,
 		.procname = "decnet_wmem",
 		.data = &sysctl_decnet_wmem,
 		.maxlen = sizeof(sysctl_decnet_wmem),
 		.mode = 0644,
 		.proc_handler = proc_dointvec,
-		.strategy = sysctl_intvec,
 	},
 	{
-		.ctl_name = NET_DECNET_DEBUG_LEVEL,
 		.procname = "debug",
 		.data = &decnet_debug_level,
 		.maxlen = sizeof(int),
 		.mode = 0644,
 		.proc_handler = proc_dointvec,
-		.strategy = sysctl_intvec,
 	},
-	{0}
+	{ }
 };
 
 static struct ctl_path dn_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "decnet", .ctl_name = NET_DECNET, },
+	{ .procname = "net", },
+	{ .procname = "decnet", },
 	{ }
 };
 
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 0e0254f..29b4931 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -457,15 +457,15 @@
 	iov[0].iov_len = size;
 	for (i = 0; i < msg->msg_iovlen; i++) {
 		void __user *base = msg->msg_iov[i].iov_base;
-		size_t len = msg->msg_iov[i].iov_len;
+		size_t iov_len = msg->msg_iov[i].iov_len;
 		/* Check it now since we switch to KERNEL_DS later. */
-		if (!access_ok(VERIFY_READ, base, len)) {
+		if (!access_ok(VERIFY_READ, base, iov_len)) {
 			mutex_unlock(&econet_mutex);
 			return -EFAULT;
 		}
 		iov[i+1].iov_base = base;
-		iov[i+1].iov_len = len;
-		size += len;
+		iov[i+1].iov_len = iov_len;
+		size += iov_len;
 	}
 
 	/* Get a skbuff (no data, just holds our cb information) */
@@ -605,13 +605,14 @@
  *	Create an Econet socket
  */
 
-static int econet_create(struct net *net, struct socket *sock, int protocol)
+static int econet_create(struct net *net, struct socket *sock, int protocol,
+			 int kern)
 {
 	struct sock *sk;
 	struct econet_sock *eo;
 	int err;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	/* Econet only provides datagram services. */
@@ -742,7 +743,7 @@
 	return 0;
 }
 
-static struct net_proto_family econet_family_ops = {
+static const struct net_proto_family econet_family_ops = {
 	.family =	PF_ECONET,
 	.create =	econet_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 5a883af..dd3db88 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -393,10 +393,3 @@
 	return ((ssize_t) l);
 }
 EXPORT_SYMBOL(sysfs_format_mac);
-
-char *print_mac(char *buf, const unsigned char *addr)
-{
-	_format_mac_addr(buf, MAC_BUF_SIZE, addr, ETH_ALEN);
-	return buf;
-}
-EXPORT_SYMBOL(print_mac);
diff --git a/net/ieee802154/Makefile b/net/ieee802154/Makefile
index 4068a9f..ce2d335 100644
--- a/net/ieee802154/Makefile
+++ b/net/ieee802154/Makefile
@@ -1,5 +1,5 @@
-obj-$(CONFIG_IEEE802154) +=	nl802154.o af_802154.o wpan-class.o
-nl802154-y		:= netlink.o nl_policy.o
+obj-$(CONFIG_IEEE802154) +=	ieee802154.o af_802154.o
+ieee802154-y		:= netlink.o nl-mac.o nl-phy.o nl_policy.o wpan-class.o
 af_802154-y		:= af_ieee802154.o raw.o dgram.o
 
 ccflags-y += -Wall -DDEBUG
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index cd949d5..bad1c49 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -234,14 +234,14 @@
  * set the state.
  */
 static int ieee802154_create(struct net *net, struct socket *sock,
-		int protocol)
+			     int protocol, int kern)
 {
 	struct sock *sk;
 	int rc;
 	struct proto *proto;
 	const struct proto_ops *ops;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	switch (sock->type) {
@@ -285,7 +285,7 @@
 	return rc;
 }
 
-static struct net_proto_family ieee802154_family_ops = {
+static const struct net_proto_family ieee802154_family_ops = {
 	.family		= PF_IEEE802154,
 	.create		= ieee802154_create,
 	.owner		= THIS_MODULE,
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index a413b1b..9aac5ae 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -303,7 +303,7 @@
 	if (err)
 		goto done;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (flags & MSG_TRUNC)
 		copied = skb->len;
@@ -318,7 +318,6 @@
 static int dgram_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
diff --git a/net/ieee802154/ieee802154.h b/net/ieee802154/ieee802154.h
new file mode 100644
index 0000000..aadec42
--- /dev/null
+++ b/net/ieee802154/ieee802154.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007, 2008, 2009 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef IEEE_802154_LOCAL_H
+#define IEEE_802154_LOCAL_H
+
+int __init ieee802154_nl_init(void);
+void __exit ieee802154_nl_exit(void);
+
+#define IEEE802154_OP(_cmd, _func)			\
+	{						\
+		.cmd	= _cmd,				\
+		.policy	= ieee802154_policy,		\
+		.doit	= _func,			\
+		.dumpit	= NULL,				\
+		.flags	= GENL_ADMIN_PERM,		\
+	}
+
+#define IEEE802154_DUMP(_cmd, _func, _dump)		\
+	{						\
+		.cmd	= _cmd,				\
+		.policy	= ieee802154_policy,		\
+		.doit	= _func,			\
+		.dumpit	= _dump,			\
+	}
+
+struct genl_info;
+
+struct sk_buff *ieee802154_nl_create(int flags, u8 req);
+int ieee802154_nl_mcast(struct sk_buff *msg, unsigned int group);
+struct sk_buff *ieee802154_nl_new_reply(struct genl_info *info,
+		int flags, u8 req);
+int ieee802154_nl_reply(struct sk_buff *msg, struct genl_info *info);
+
+extern struct genl_family nl802154_family;
+int nl802154_mac_register(void);
+int nl802154_phy_register(void);
+
+#endif
diff --git a/net/ieee802154/netlink.c b/net/ieee802154/netlink.c
index ca767bd..33137b9 100644
--- a/net/ieee802154/netlink.c
+++ b/net/ieee802154/netlink.c
@@ -23,21 +23,15 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/if_arp.h>
-#include <linux/netdevice.h>
-#include <net/netlink.h>
 #include <net/genetlink.h>
-#include <net/sock.h>
 #include <linux/nl802154.h>
-#include <net/af_ieee802154.h>
-#include <net/nl802154.h>
-#include <net/ieee802154.h>
-#include <net/ieee802154_netdev.h>
+
+#include "ieee802154.h"
 
 static unsigned int ieee802154_seq_num;
 static DEFINE_SPINLOCK(ieee802154_seq_lock);
 
-static struct genl_family ieee802154_coordinator_family = {
+struct genl_family nl802154_family = {
 	.id		= GENL_ID_GENERATE,
 	.hdrsize	= 0,
 	.name		= IEEE802154_NL_NAME,
@@ -45,16 +39,8 @@
 	.maxattr	= IEEE802154_ATTR_MAX,
 };
 
-static struct genl_multicast_group ieee802154_coord_mcgrp = {
-	.name		= IEEE802154_MCAST_COORD_NAME,
-};
-
-static struct genl_multicast_group ieee802154_beacon_mcgrp = {
-	.name		= IEEE802154_MCAST_BEACON_NAME,
-};
-
 /* Requests to userspace */
-static struct sk_buff *ieee802154_nl_create(int flags, u8 req)
+struct sk_buff *ieee802154_nl_create(int flags, u8 req)
 {
 	void *hdr;
 	struct sk_buff *msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
@@ -65,7 +51,7 @@
 
 	spin_lock_irqsave(&ieee802154_seq_lock, f);
 	hdr = genlmsg_put(msg, 0, ieee802154_seq_num++,
-			&ieee802154_coordinator_family, flags, req);
+			&nl802154_family, flags, req);
 	spin_unlock_irqrestore(&ieee802154_seq_lock, f);
 	if (!hdr) {
 		nlmsg_free(msg);
@@ -75,7 +61,7 @@
 	return msg;
 }
 
-static int ieee802154_nl_finish(struct sk_buff *msg)
+int ieee802154_nl_mcast(struct sk_buff *msg, unsigned int group)
 {
 	/* XXX: nlh is right at the start of msg */
 	void *hdr = genlmsg_data(NLMSG_DATA(msg->data));
@@ -83,607 +69,70 @@
 	if (genlmsg_end(msg, hdr) < 0)
 		goto out;
 
-	return genlmsg_multicast(msg, 0, ieee802154_coord_mcgrp.id,
-			GFP_ATOMIC);
+	return genlmsg_multicast(msg, 0, group, GFP_ATOMIC);
 out:
 	nlmsg_free(msg);
 	return -ENOBUFS;
 }
 
-int ieee802154_nl_assoc_indic(struct net_device *dev,
-		struct ieee802154_addr *addr, u8 cap)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	if (addr->addr_type != IEEE802154_ADDR_LONG) {
-		pr_err("%s: received non-long source address!\n", __func__);
-		return -EINVAL;
-	}
-
-	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_INDIC);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-
-	NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
-			addr->hwaddr);
-
-	NLA_PUT_U8(msg, IEEE802154_ATTR_CAPABILITY, cap);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_assoc_indic);
-
-int ieee802154_nl_assoc_confirm(struct net_device *dev, u16 short_addr,
-		u8 status)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_CONF);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-
-	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR, short_addr);
-	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_assoc_confirm);
-
-int ieee802154_nl_disassoc_indic(struct net_device *dev,
-		struct ieee802154_addr *addr, u8 reason)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_INDIC);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-
-	if (addr->addr_type == IEEE802154_ADDR_LONG)
-		NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
-				addr->hwaddr);
-	else
-		NLA_PUT_U16(msg, IEEE802154_ATTR_SRC_SHORT_ADDR,
-				addr->short_addr);
-
-	NLA_PUT_U8(msg, IEEE802154_ATTR_REASON, reason);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_disassoc_indic);
-
-int ieee802154_nl_disassoc_confirm(struct net_device *dev, u8 status)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_CONF);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-
-	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_disassoc_confirm);
-
-int ieee802154_nl_beacon_indic(struct net_device *dev,
-		u16 panid, u16 coord_addr)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	msg = ieee802154_nl_create(0, IEEE802154_BEACON_NOTIFY_INDIC);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_SHORT_ADDR, coord_addr);
-	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_PAN_ID, panid);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_beacon_indic);
-
-int ieee802154_nl_scan_confirm(struct net_device *dev,
-		u8 status, u8 scan_type, u32 unscanned, u8 page,
-		u8 *edl/* , struct list_head *pan_desc_list */)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	msg = ieee802154_nl_create(0, IEEE802154_SCAN_CONF);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-
-	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
-	NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, scan_type);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, unscanned);
-	NLA_PUT_U8(msg, IEEE802154_ATTR_PAGE, page);
-
-	if (edl)
-		NLA_PUT(msg, IEEE802154_ATTR_ED_LIST, 27, edl);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_scan_confirm);
-
-int ieee802154_nl_start_confirm(struct net_device *dev, u8 status)
-{
-	struct sk_buff *msg;
-
-	pr_debug("%s\n", __func__);
-
-	msg = ieee802154_nl_create(0, IEEE802154_START_CONF);
-	if (!msg)
-		return -ENOBUFS;
-
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-			dev->dev_addr);
-
-	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
-
-	return ieee802154_nl_finish(msg);
-
-nla_put_failure:
-	nlmsg_free(msg);
-	return -ENOBUFS;
-}
-EXPORT_SYMBOL(ieee802154_nl_start_confirm);
-
-static int ieee802154_nl_fill_iface(struct sk_buff *msg, u32 pid,
-	u32 seq, int flags, struct net_device *dev)
+struct sk_buff *ieee802154_nl_new_reply(struct genl_info *info,
+		int flags, u8 req)
 {
 	void *hdr;
+	struct sk_buff *msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
 
-	pr_debug("%s\n", __func__);
+	if (!msg)
+		return NULL;
 
-	hdr = genlmsg_put(msg, 0, seq, &ieee802154_coordinator_family, flags,
-		IEEE802154_LIST_IFACE);
-	if (!hdr)
+	hdr = genlmsg_put_reply(msg, info,
+			&nl802154_family, flags, req);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return NULL;
+	}
+
+	return msg;
+}
+
+int ieee802154_nl_reply(struct sk_buff *msg, struct genl_info *info)
+{
+	/* XXX: nlh is right at the start of msg */
+	void *hdr = genlmsg_data(NLMSG_DATA(msg->data));
+
+	if (genlmsg_end(msg, hdr) < 0)
 		goto out;
 
-	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
-	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
-
-	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
-		dev->dev_addr);
-	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR,
-		ieee802154_mlme_ops(dev)->get_short_addr(dev));
-	NLA_PUT_U16(msg, IEEE802154_ATTR_PAN_ID,
-		ieee802154_mlme_ops(dev)->get_pan_id(dev));
-	return genlmsg_end(msg, hdr);
-
-nla_put_failure:
-	genlmsg_cancel(msg, hdr);
+	return genlmsg_reply(msg, info);
 out:
-	return -EMSGSIZE;
-}
-
-/* Requests from userspace */
-static struct net_device *ieee802154_nl_get_dev(struct genl_info *info)
-{
-	struct net_device *dev;
-
-	if (info->attrs[IEEE802154_ATTR_DEV_NAME]) {
-		char name[IFNAMSIZ + 1];
-		nla_strlcpy(name, info->attrs[IEEE802154_ATTR_DEV_NAME],
-				sizeof(name));
-		dev = dev_get_by_name(&init_net, name);
-	} else if (info->attrs[IEEE802154_ATTR_DEV_INDEX])
-		dev = dev_get_by_index(&init_net,
-			nla_get_u32(info->attrs[IEEE802154_ATTR_DEV_INDEX]));
-	else
-		return NULL;
-
-	if (!dev)
-		return NULL;
-
-	if (dev->type != ARPHRD_IEEE802154) {
-		dev_put(dev);
-		return NULL;
-	}
-
-	return dev;
-}
-
-static int ieee802154_associate_req(struct sk_buff *skb,
-		struct genl_info *info)
-{
-	struct net_device *dev;
-	struct ieee802154_addr addr;
-	u8 page;
-	int ret = -EINVAL;
-
-	if (!info->attrs[IEEE802154_ATTR_CHANNEL] ||
-	    !info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
-	    (!info->attrs[IEEE802154_ATTR_COORD_HW_ADDR] &&
-		!info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]) ||
-	    !info->attrs[IEEE802154_ATTR_CAPABILITY])
-		return -EINVAL;
-
-	dev = ieee802154_nl_get_dev(info);
-	if (!dev)
-		return -ENODEV;
-
-	if (info->attrs[IEEE802154_ATTR_COORD_HW_ADDR]) {
-		addr.addr_type = IEEE802154_ADDR_LONG;
-		nla_memcpy(addr.hwaddr,
-				info->attrs[IEEE802154_ATTR_COORD_HW_ADDR],
-				IEEE802154_ADDR_LEN);
-	} else {
-		addr.addr_type = IEEE802154_ADDR_SHORT;
-		addr.short_addr = nla_get_u16(
-				info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
-	}
-	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
-
-	if (info->attrs[IEEE802154_ATTR_PAGE])
-		page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
-	else
-		page = 0;
-
-	ret = ieee802154_mlme_ops(dev)->assoc_req(dev, &addr,
-			nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]),
-			page,
-			nla_get_u8(info->attrs[IEEE802154_ATTR_CAPABILITY]));
-
-	dev_put(dev);
-	return ret;
-}
-
-static int ieee802154_associate_resp(struct sk_buff *skb,
-		struct genl_info *info)
-{
-	struct net_device *dev;
-	struct ieee802154_addr addr;
-	int ret = -EINVAL;
-
-	if (!info->attrs[IEEE802154_ATTR_STATUS] ||
-	    !info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] ||
-	    !info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR])
-		return -EINVAL;
-
-	dev = ieee802154_nl_get_dev(info);
-	if (!dev)
-		return -ENODEV;
-
-	addr.addr_type = IEEE802154_ADDR_LONG;
-	nla_memcpy(addr.hwaddr, info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
-			IEEE802154_ADDR_LEN);
-	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
-
-
-	ret = ieee802154_mlme_ops(dev)->assoc_resp(dev, &addr,
-		nla_get_u16(info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]),
-		nla_get_u8(info->attrs[IEEE802154_ATTR_STATUS]));
-
-	dev_put(dev);
-	return ret;
-}
-
-static int ieee802154_disassociate_req(struct sk_buff *skb,
-		struct genl_info *info)
-{
-	struct net_device *dev;
-	struct ieee802154_addr addr;
-	int ret = -EINVAL;
-
-	if ((!info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] &&
-		!info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]) ||
-	    !info->attrs[IEEE802154_ATTR_REASON])
-		return -EINVAL;
-
-	dev = ieee802154_nl_get_dev(info);
-	if (!dev)
-		return -ENODEV;
-
-	if (info->attrs[IEEE802154_ATTR_DEST_HW_ADDR]) {
-		addr.addr_type = IEEE802154_ADDR_LONG;
-		nla_memcpy(addr.hwaddr,
-				info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
-				IEEE802154_ADDR_LEN);
-	} else {
-		addr.addr_type = IEEE802154_ADDR_SHORT;
-		addr.short_addr = nla_get_u16(
-				info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]);
-	}
-	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
-
-	ret = ieee802154_mlme_ops(dev)->disassoc_req(dev, &addr,
-			nla_get_u8(info->attrs[IEEE802154_ATTR_REASON]));
-
-	dev_put(dev);
-	return ret;
-}
-
-/*
- * PANid, channel, beacon_order = 15, superframe_order = 15,
- * PAN_coordinator, battery_life_extension = 0,
- * coord_realignment = 0, security_enable = 0
-*/
-static int ieee802154_start_req(struct sk_buff *skb, struct genl_info *info)
-{
-	struct net_device *dev;
-	struct ieee802154_addr addr;
-
-	u8 channel, bcn_ord, sf_ord;
-	u8 page;
-	int pan_coord, blx, coord_realign;
-	int ret;
-
-	if (!info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
-	    !info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR] ||
-	    !info->attrs[IEEE802154_ATTR_CHANNEL] ||
-	    !info->attrs[IEEE802154_ATTR_BCN_ORD] ||
-	    !info->attrs[IEEE802154_ATTR_SF_ORD] ||
-	    !info->attrs[IEEE802154_ATTR_PAN_COORD] ||
-	    !info->attrs[IEEE802154_ATTR_BAT_EXT] ||
-	    !info->attrs[IEEE802154_ATTR_COORD_REALIGN]
-	 )
-		return -EINVAL;
-
-	dev = ieee802154_nl_get_dev(info);
-	if (!dev)
-		return -ENODEV;
-
-	addr.addr_type = IEEE802154_ADDR_SHORT;
-	addr.short_addr = nla_get_u16(
-			info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
-	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
-
-	channel = nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]);
-	bcn_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_BCN_ORD]);
-	sf_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_SF_ORD]);
-	pan_coord = nla_get_u8(info->attrs[IEEE802154_ATTR_PAN_COORD]);
-	blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
-	coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
-
-	if (info->attrs[IEEE802154_ATTR_PAGE])
-		page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
-	else
-		page = 0;
-
-
-	if (addr.short_addr == IEEE802154_ADDR_BROADCAST) {
-		ieee802154_nl_start_confirm(dev, IEEE802154_NO_SHORT_ADDRESS);
-		dev_put(dev);
-		return -EINVAL;
-	}
-
-	ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel, page,
-		bcn_ord, sf_ord, pan_coord, blx, coord_realign);
-
-	dev_put(dev);
-	return ret;
-}
-
-static int ieee802154_scan_req(struct sk_buff *skb, struct genl_info *info)
-{
-	struct net_device *dev;
-	int ret;
-	u8 type;
-	u32 channels;
-	u8 duration;
-	u8 page;
-
-	if (!info->attrs[IEEE802154_ATTR_SCAN_TYPE] ||
-	    !info->attrs[IEEE802154_ATTR_CHANNELS] ||
-	    !info->attrs[IEEE802154_ATTR_DURATION])
-		return -EINVAL;
-
-	dev = ieee802154_nl_get_dev(info);
-	if (!dev)
-		return -ENODEV;
-
-	type = nla_get_u8(info->attrs[IEEE802154_ATTR_SCAN_TYPE]);
-	channels = nla_get_u32(info->attrs[IEEE802154_ATTR_CHANNELS]);
-	duration = nla_get_u8(info->attrs[IEEE802154_ATTR_DURATION]);
-
-	if (info->attrs[IEEE802154_ATTR_PAGE])
-		page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
-	else
-		page = 0;
-
-
-	ret = ieee802154_mlme_ops(dev)->scan_req(dev, type, channels, page,
-			duration);
-
-	dev_put(dev);
-	return ret;
-}
-
-static int ieee802154_list_iface(struct sk_buff *skb,
-	struct genl_info *info)
-{
-	/* Request for interface name, index, type, IEEE address,
-	   PAN Id, short address */
-	struct sk_buff *msg;
-	struct net_device *dev = NULL;
-	int rc = -ENOBUFS;
-
-	pr_debug("%s\n", __func__);
-
-	dev = ieee802154_nl_get_dev(info);
-	if (!dev)
-		return -ENODEV;
-
-	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
-	if (!msg)
-		goto out_dev;
-
-	rc = ieee802154_nl_fill_iface(msg, info->snd_pid, info->snd_seq,
-			0, dev);
-	if (rc < 0)
-		goto out_free;
-
-	dev_put(dev);
-
-	return genlmsg_unicast(&init_net, msg, info->snd_pid);
-out_free:
 	nlmsg_free(msg);
-out_dev:
-	dev_put(dev);
-	return rc;
-
+	return -ENOBUFS;
 }
 
-static int ieee802154_dump_iface(struct sk_buff *skb,
-	struct netlink_callback *cb)
-{
-	struct net *net = sock_net(skb->sk);
-	struct net_device *dev;
-	int idx;
-	int s_idx = cb->args[0];
-
-	pr_debug("%s\n", __func__);
-
-	idx = 0;
-	for_each_netdev(net, dev) {
-		if (idx < s_idx || (dev->type != ARPHRD_IEEE802154))
-			goto cont;
-
-		if (ieee802154_nl_fill_iface(skb, NETLINK_CB(cb->skb).pid,
-			cb->nlh->nlmsg_seq, NLM_F_MULTI, dev) < 0)
-			break;
-cont:
-		idx++;
-	}
-	cb->args[0] = idx;
-
-	return skb->len;
-}
-
-#define IEEE802154_OP(_cmd, _func)			\
-	{						\
-		.cmd	= _cmd,				\
-		.policy	= ieee802154_policy,		\
-		.doit	= _func,			\
-		.dumpit	= NULL,				\
-		.flags	= GENL_ADMIN_PERM,		\
-	}
-
-#define IEEE802154_DUMP(_cmd, _func, _dump)		\
-	{						\
-		.cmd	= _cmd,				\
-		.policy	= ieee802154_policy,		\
-		.doit	= _func,			\
-		.dumpit	= _dump,			\
-	}
-
-static struct genl_ops ieee802154_coordinator_ops[] = {
-	IEEE802154_OP(IEEE802154_ASSOCIATE_REQ, ieee802154_associate_req),
-	IEEE802154_OP(IEEE802154_ASSOCIATE_RESP, ieee802154_associate_resp),
-	IEEE802154_OP(IEEE802154_DISASSOCIATE_REQ, ieee802154_disassociate_req),
-	IEEE802154_OP(IEEE802154_SCAN_REQ, ieee802154_scan_req),
-	IEEE802154_OP(IEEE802154_START_REQ, ieee802154_start_req),
-	IEEE802154_DUMP(IEEE802154_LIST_IFACE, ieee802154_list_iface,
-							ieee802154_dump_iface),
-};
-
-static int __init ieee802154_nl_init(void)
+int __init ieee802154_nl_init(void)
 {
 	int rc;
-	int i;
 
-	rc = genl_register_family(&ieee802154_coordinator_family);
+	rc = genl_register_family(&nl802154_family);
 	if (rc)
 		goto fail;
 
-	rc = genl_register_mc_group(&ieee802154_coordinator_family,
-			&ieee802154_coord_mcgrp);
+	rc = nl802154_mac_register();
 	if (rc)
 		goto fail;
 
-	rc = genl_register_mc_group(&ieee802154_coordinator_family,
-			&ieee802154_beacon_mcgrp);
+	rc = nl802154_phy_register();
 	if (rc)
 		goto fail;
 
-
-	for (i = 0; i < ARRAY_SIZE(ieee802154_coordinator_ops); i++) {
-		rc = genl_register_ops(&ieee802154_coordinator_family,
-				&ieee802154_coordinator_ops[i]);
-		if (rc)
-			goto fail;
-	}
-
 	return 0;
 
 fail:
-	genl_unregister_family(&ieee802154_coordinator_family);
+	genl_unregister_family(&nl802154_family);
 	return rc;
 }
-module_init(ieee802154_nl_init);
 
-static void __exit ieee802154_nl_exit(void)
+void __exit ieee802154_nl_exit(void)
 {
-	genl_unregister_family(&ieee802154_coordinator_family);
+	genl_unregister_family(&nl802154_family);
 }
-module_exit(ieee802154_nl_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("ieee 802.15.4 configuration interface");
 
diff --git a/net/ieee802154/nl-mac.c b/net/ieee802154/nl-mac.c
new file mode 100644
index 0000000..135c167
--- /dev/null
+++ b/net/ieee802154/nl-mac.c
@@ -0,0 +1,617 @@
+/*
+ * Netlink inteface for IEEE 802.15.4 stack
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <net/netlink.h>
+#include <net/genetlink.h>
+#include <net/sock.h>
+#include <linux/nl802154.h>
+#include <net/af_ieee802154.h>
+#include <net/nl802154.h>
+#include <net/ieee802154.h>
+#include <net/ieee802154_netdev.h>
+#include <net/wpan-phy.h>
+
+#include "ieee802154.h"
+
+static struct genl_multicast_group ieee802154_coord_mcgrp = {
+	.name		= IEEE802154_MCAST_COORD_NAME,
+};
+
+static struct genl_multicast_group ieee802154_beacon_mcgrp = {
+	.name		= IEEE802154_MCAST_BEACON_NAME,
+};
+
+int ieee802154_nl_assoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 cap)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	if (addr->addr_type != IEEE802154_ADDR_LONG) {
+		pr_err("%s: received non-long source address!\n", __func__);
+		return -EINVAL;
+	}
+
+	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
+			addr->hwaddr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_CAPABILITY, cap);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_assoc_indic);
+
+int ieee802154_nl_assoc_confirm(struct net_device *dev, u16 short_addr,
+		u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_ASSOCIATE_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR, short_addr);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_assoc_confirm);
+
+int ieee802154_nl_disassoc_indic(struct net_device *dev,
+		struct ieee802154_addr *addr, u8 reason)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	if (addr->addr_type == IEEE802154_ADDR_LONG)
+		NLA_PUT(msg, IEEE802154_ATTR_SRC_HW_ADDR, IEEE802154_ADDR_LEN,
+				addr->hwaddr);
+	else
+		NLA_PUT_U16(msg, IEEE802154_ATTR_SRC_SHORT_ADDR,
+				addr->short_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_REASON, reason);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_disassoc_indic);
+
+int ieee802154_nl_disassoc_confirm(struct net_device *dev, u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_DISASSOCIATE_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_disassoc_confirm);
+
+int ieee802154_nl_beacon_indic(struct net_device *dev,
+		u16 panid, u16 coord_addr)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_BEACON_NOTIFY_INDIC);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_SHORT_ADDR, coord_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_COORD_PAN_ID, panid);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_beacon_indic);
+
+int ieee802154_nl_scan_confirm(struct net_device *dev,
+		u8 status, u8 scan_type, u32 unscanned, u8 page,
+		u8 *edl/* , struct list_head *pan_desc_list */)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_SCAN_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_SCAN_TYPE, scan_type);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_CHANNELS, unscanned);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_PAGE, page);
+
+	if (edl)
+		NLA_PUT(msg, IEEE802154_ATTR_ED_LIST, 27, edl);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_scan_confirm);
+
+int ieee802154_nl_start_confirm(struct net_device *dev, u8 status)
+{
+	struct sk_buff *msg;
+
+	pr_debug("%s\n", __func__);
+
+	msg = ieee802154_nl_create(0, IEEE802154_START_CONF);
+	if (!msg)
+		return -ENOBUFS;
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+			dev->dev_addr);
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_STATUS, status);
+
+	return ieee802154_nl_mcast(msg, ieee802154_coord_mcgrp.id);
+
+nla_put_failure:
+	nlmsg_free(msg);
+	return -ENOBUFS;
+}
+EXPORT_SYMBOL(ieee802154_nl_start_confirm);
+
+static int ieee802154_nl_fill_iface(struct sk_buff *msg, u32 pid,
+	u32 seq, int flags, struct net_device *dev)
+{
+	void *hdr;
+	struct wpan_phy *phy;
+
+	pr_debug("%s\n", __func__);
+
+	hdr = genlmsg_put(msg, 0, seq, &nl802154_family, flags,
+		IEEE802154_LIST_IFACE);
+	if (!hdr)
+		goto out;
+
+	phy = ieee802154_mlme_ops(dev)->get_phy(dev);
+	BUG_ON(!phy);
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy));
+	NLA_PUT_U32(msg, IEEE802154_ATTR_DEV_INDEX, dev->ifindex);
+
+	NLA_PUT(msg, IEEE802154_ATTR_HW_ADDR, IEEE802154_ADDR_LEN,
+		dev->dev_addr);
+	NLA_PUT_U16(msg, IEEE802154_ATTR_SHORT_ADDR,
+		ieee802154_mlme_ops(dev)->get_short_addr(dev));
+	NLA_PUT_U16(msg, IEEE802154_ATTR_PAN_ID,
+		ieee802154_mlme_ops(dev)->get_pan_id(dev));
+	wpan_phy_put(phy);
+	return genlmsg_end(msg, hdr);
+
+nla_put_failure:
+	wpan_phy_put(phy);
+	genlmsg_cancel(msg, hdr);
+out:
+	return -EMSGSIZE;
+}
+
+/* Requests from userspace */
+static struct net_device *ieee802154_nl_get_dev(struct genl_info *info)
+{
+	struct net_device *dev;
+
+	if (info->attrs[IEEE802154_ATTR_DEV_NAME]) {
+		char name[IFNAMSIZ + 1];
+		nla_strlcpy(name, info->attrs[IEEE802154_ATTR_DEV_NAME],
+				sizeof(name));
+		dev = dev_get_by_name(&init_net, name);
+	} else if (info->attrs[IEEE802154_ATTR_DEV_INDEX])
+		dev = dev_get_by_index(&init_net,
+			nla_get_u32(info->attrs[IEEE802154_ATTR_DEV_INDEX]));
+	else
+		return NULL;
+
+	if (!dev)
+		return NULL;
+
+	if (dev->type != ARPHRD_IEEE802154) {
+		dev_put(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+static int ieee802154_associate_req(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	u8 page;
+	int ret = -EINVAL;
+
+	if (!info->attrs[IEEE802154_ATTR_CHANNEL] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
+	    (!info->attrs[IEEE802154_ATTR_COORD_HW_ADDR] &&
+		!info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]) ||
+	    !info->attrs[IEEE802154_ATTR_CAPABILITY])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	if (info->attrs[IEEE802154_ATTR_COORD_HW_ADDR]) {
+		addr.addr_type = IEEE802154_ADDR_LONG;
+		nla_memcpy(addr.hwaddr,
+				info->attrs[IEEE802154_ATTR_COORD_HW_ADDR],
+				IEEE802154_ADDR_LEN);
+	} else {
+		addr.addr_type = IEEE802154_ADDR_SHORT;
+		addr.short_addr = nla_get_u16(
+				info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
+	}
+	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+
+	if (info->attrs[IEEE802154_ATTR_PAGE])
+		page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
+	else
+		page = 0;
+
+	ret = ieee802154_mlme_ops(dev)->assoc_req(dev, &addr,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]),
+			page,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_CAPABILITY]));
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_associate_resp(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if (!info->attrs[IEEE802154_ATTR_STATUS] ||
+	    !info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] ||
+	    !info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	addr.addr_type = IEEE802154_ADDR_LONG;
+	nla_memcpy(addr.hwaddr, info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
+			IEEE802154_ADDR_LEN);
+	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+
+
+	ret = ieee802154_mlme_ops(dev)->assoc_resp(dev, &addr,
+		nla_get_u16(info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]),
+		nla_get_u8(info->attrs[IEEE802154_ATTR_STATUS]));
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_disassociate_req(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+	int ret = -EINVAL;
+
+	if ((!info->attrs[IEEE802154_ATTR_DEST_HW_ADDR] &&
+		!info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]) ||
+	    !info->attrs[IEEE802154_ATTR_REASON])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	if (info->attrs[IEEE802154_ATTR_DEST_HW_ADDR]) {
+		addr.addr_type = IEEE802154_ADDR_LONG;
+		nla_memcpy(addr.hwaddr,
+				info->attrs[IEEE802154_ATTR_DEST_HW_ADDR],
+				IEEE802154_ADDR_LEN);
+	} else {
+		addr.addr_type = IEEE802154_ADDR_SHORT;
+		addr.short_addr = nla_get_u16(
+				info->attrs[IEEE802154_ATTR_DEST_SHORT_ADDR]);
+	}
+	addr.pan_id = ieee802154_mlme_ops(dev)->get_pan_id(dev);
+
+	ret = ieee802154_mlme_ops(dev)->disassoc_req(dev, &addr,
+			nla_get_u8(info->attrs[IEEE802154_ATTR_REASON]));
+
+	dev_put(dev);
+	return ret;
+}
+
+/*
+ * PANid, channel, beacon_order = 15, superframe_order = 15,
+ * PAN_coordinator, battery_life_extension = 0,
+ * coord_realignment = 0, security_enable = 0
+*/
+static int ieee802154_start_req(struct sk_buff *skb, struct genl_info *info)
+{
+	struct net_device *dev;
+	struct ieee802154_addr addr;
+
+	u8 channel, bcn_ord, sf_ord;
+	u8 page;
+	int pan_coord, blx, coord_realign;
+	int ret;
+
+	if (!info->attrs[IEEE802154_ATTR_COORD_PAN_ID] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR] ||
+	    !info->attrs[IEEE802154_ATTR_CHANNEL] ||
+	    !info->attrs[IEEE802154_ATTR_BCN_ORD] ||
+	    !info->attrs[IEEE802154_ATTR_SF_ORD] ||
+	    !info->attrs[IEEE802154_ATTR_PAN_COORD] ||
+	    !info->attrs[IEEE802154_ATTR_BAT_EXT] ||
+	    !info->attrs[IEEE802154_ATTR_COORD_REALIGN]
+	 )
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	addr.addr_type = IEEE802154_ADDR_SHORT;
+	addr.short_addr = nla_get_u16(
+			info->attrs[IEEE802154_ATTR_COORD_SHORT_ADDR]);
+	addr.pan_id = nla_get_u16(info->attrs[IEEE802154_ATTR_COORD_PAN_ID]);
+
+	channel = nla_get_u8(info->attrs[IEEE802154_ATTR_CHANNEL]);
+	bcn_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_BCN_ORD]);
+	sf_ord = nla_get_u8(info->attrs[IEEE802154_ATTR_SF_ORD]);
+	pan_coord = nla_get_u8(info->attrs[IEEE802154_ATTR_PAN_COORD]);
+	blx = nla_get_u8(info->attrs[IEEE802154_ATTR_BAT_EXT]);
+	coord_realign = nla_get_u8(info->attrs[IEEE802154_ATTR_COORD_REALIGN]);
+
+	if (info->attrs[IEEE802154_ATTR_PAGE])
+		page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
+	else
+		page = 0;
+
+
+	if (addr.short_addr == IEEE802154_ADDR_BROADCAST) {
+		ieee802154_nl_start_confirm(dev, IEEE802154_NO_SHORT_ADDRESS);
+		dev_put(dev);
+		return -EINVAL;
+	}
+
+	ret = ieee802154_mlme_ops(dev)->start_req(dev, &addr, channel, page,
+		bcn_ord, sf_ord, pan_coord, blx, coord_realign);
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_scan_req(struct sk_buff *skb, struct genl_info *info)
+{
+	struct net_device *dev;
+	int ret;
+	u8 type;
+	u32 channels;
+	u8 duration;
+	u8 page;
+
+	if (!info->attrs[IEEE802154_ATTR_SCAN_TYPE] ||
+	    !info->attrs[IEEE802154_ATTR_CHANNELS] ||
+	    !info->attrs[IEEE802154_ATTR_DURATION])
+		return -EINVAL;
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	type = nla_get_u8(info->attrs[IEEE802154_ATTR_SCAN_TYPE]);
+	channels = nla_get_u32(info->attrs[IEEE802154_ATTR_CHANNELS]);
+	duration = nla_get_u8(info->attrs[IEEE802154_ATTR_DURATION]);
+
+	if (info->attrs[IEEE802154_ATTR_PAGE])
+		page = nla_get_u8(info->attrs[IEEE802154_ATTR_PAGE]);
+	else
+		page = 0;
+
+
+	ret = ieee802154_mlme_ops(dev)->scan_req(dev, type, channels, page,
+			duration);
+
+	dev_put(dev);
+	return ret;
+}
+
+static int ieee802154_list_iface(struct sk_buff *skb,
+	struct genl_info *info)
+{
+	/* Request for interface name, index, type, IEEE address,
+	   PAN Id, short address */
+	struct sk_buff *msg;
+	struct net_device *dev = NULL;
+	int rc = -ENOBUFS;
+
+	pr_debug("%s\n", __func__);
+
+	dev = ieee802154_nl_get_dev(info);
+	if (!dev)
+		return -ENODEV;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		goto out_dev;
+
+	rc = ieee802154_nl_fill_iface(msg, info->snd_pid, info->snd_seq,
+			0, dev);
+	if (rc < 0)
+		goto out_free;
+
+	dev_put(dev);
+
+	return genlmsg_reply(msg, info);
+out_free:
+	nlmsg_free(msg);
+out_dev:
+	dev_put(dev);
+	return rc;
+
+}
+
+static int ieee802154_dump_iface(struct sk_buff *skb,
+	struct netlink_callback *cb)
+{
+	struct net *net = sock_net(skb->sk);
+	struct net_device *dev;
+	int idx;
+	int s_idx = cb->args[0];
+
+	pr_debug("%s\n", __func__);
+
+	idx = 0;
+	for_each_netdev(net, dev) {
+		if (idx < s_idx || (dev->type != ARPHRD_IEEE802154))
+			goto cont;
+
+		if (ieee802154_nl_fill_iface(skb, NETLINK_CB(cb->skb).pid,
+			cb->nlh->nlmsg_seq, NLM_F_MULTI, dev) < 0)
+			break;
+cont:
+		idx++;
+	}
+	cb->args[0] = idx;
+
+	return skb->len;
+}
+
+static struct genl_ops ieee802154_coordinator_ops[] = {
+	IEEE802154_OP(IEEE802154_ASSOCIATE_REQ, ieee802154_associate_req),
+	IEEE802154_OP(IEEE802154_ASSOCIATE_RESP, ieee802154_associate_resp),
+	IEEE802154_OP(IEEE802154_DISASSOCIATE_REQ, ieee802154_disassociate_req),
+	IEEE802154_OP(IEEE802154_SCAN_REQ, ieee802154_scan_req),
+	IEEE802154_OP(IEEE802154_START_REQ, ieee802154_start_req),
+	IEEE802154_DUMP(IEEE802154_LIST_IFACE, ieee802154_list_iface,
+							ieee802154_dump_iface),
+};
+
+/*
+ * No need to unregister as family unregistration will do it.
+ */
+int nl802154_mac_register(void)
+{
+	int i;
+	int rc;
+
+	rc = genl_register_mc_group(&nl802154_family,
+			&ieee802154_coord_mcgrp);
+	if (rc)
+		return rc;
+
+	rc = genl_register_mc_group(&nl802154_family,
+			&ieee802154_beacon_mcgrp);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < ARRAY_SIZE(ieee802154_coordinator_ops); i++) {
+		rc = genl_register_ops(&nl802154_family,
+				&ieee802154_coordinator_ops[i]);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
diff --git a/net/ieee802154/nl-phy.c b/net/ieee802154/nl-phy.c
new file mode 100644
index 0000000..199a2d9
--- /dev/null
+++ b/net/ieee802154/nl-phy.c
@@ -0,0 +1,344 @@
+/*
+ * Netlink inteface for IEEE 802.15.4 stack
+ *
+ * Copyright 2007, 2008 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Written by:
+ * Sergey Lapin <slapin@ossfans.org>
+ * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+ * Maxim Osipov <maxim.osipov@siemens.com>
+ */
+
+#include <linux/kernel.h>
+#include <net/netlink.h>
+#include <net/genetlink.h>
+#include <net/wpan-phy.h>
+#include <net/af_ieee802154.h>
+#include <net/ieee802154_netdev.h>
+#include <net/rtnetlink.h> /* for rtnl_{un,}lock */
+#include <linux/nl802154.h>
+
+#include "ieee802154.h"
+
+static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 pid,
+	u32 seq, int flags, struct wpan_phy *phy)
+{
+	void *hdr;
+	int i, pages = 0;
+	uint32_t *buf = kzalloc(32 * sizeof(uint32_t), GFP_KERNEL);
+
+	pr_debug("%s\n", __func__);
+
+	if (!buf)
+		goto out;
+
+	hdr = genlmsg_put(msg, 0, seq, &nl802154_family, flags,
+		IEEE802154_LIST_PHY);
+	if (!hdr)
+		goto out;
+
+	mutex_lock(&phy->pib_lock);
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy));
+
+	NLA_PUT_U8(msg, IEEE802154_ATTR_PAGE, phy->current_page);
+	NLA_PUT_U8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel);
+	for (i = 0; i < 32; i++) {
+		if (phy->channels_supported[i])
+			buf[pages++] = phy->channels_supported[i] | (i << 27);
+	}
+	if (pages)
+		NLA_PUT(msg, IEEE802154_ATTR_CHANNEL_PAGE_LIST,
+				pages * sizeof(uint32_t), buf);
+
+	mutex_unlock(&phy->pib_lock);
+	return genlmsg_end(msg, hdr);
+
+nla_put_failure:
+	mutex_unlock(&phy->pib_lock);
+	genlmsg_cancel(msg, hdr);
+out:
+	kfree(buf);
+	return -EMSGSIZE;
+}
+
+static int ieee802154_list_phy(struct sk_buff *skb,
+	struct genl_info *info)
+{
+	/* Request for interface name, index, type, IEEE address,
+	   PAN Id, short address */
+	struct sk_buff *msg;
+	struct wpan_phy *phy;
+	const char *name;
+	int rc = -ENOBUFS;
+
+	pr_debug("%s\n", __func__);
+
+	if (!info->attrs[IEEE802154_ATTR_PHY_NAME])
+		return -EINVAL;
+
+	name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
+	if (name[nla_len(info->attrs[IEEE802154_ATTR_PHY_NAME]) - 1] != '\0')
+		return -EINVAL; /* phy name should be null-terminated */
+
+
+	phy = wpan_phy_find(name);
+	if (!phy)
+		return -ENODEV;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+	if (!msg)
+		goto out_dev;
+
+	rc = ieee802154_nl_fill_phy(msg, info->snd_pid, info->snd_seq,
+			0, phy);
+	if (rc < 0)
+		goto out_free;
+
+	wpan_phy_put(phy);
+
+	return genlmsg_reply(msg, info);
+out_free:
+	nlmsg_free(msg);
+out_dev:
+	wpan_phy_put(phy);
+	return rc;
+
+}
+
+struct dump_phy_data {
+	struct sk_buff *skb;
+	struct netlink_callback *cb;
+	int idx, s_idx;
+};
+
+static int ieee802154_dump_phy_iter(struct wpan_phy *phy, void *_data)
+{
+	int rc;
+	struct dump_phy_data *data = _data;
+
+	pr_debug("%s\n", __func__);
+
+	if (data->idx++ < data->s_idx)
+		return 0;
+
+	rc = ieee802154_nl_fill_phy(data->skb,
+			NETLINK_CB(data->cb->skb).pid,
+			data->cb->nlh->nlmsg_seq,
+			NLM_F_MULTI,
+			phy);
+
+	if (rc < 0) {
+		data->idx--;
+		return rc;
+	}
+
+	return 0;
+}
+
+static int ieee802154_dump_phy(struct sk_buff *skb,
+	struct netlink_callback *cb)
+{
+	struct dump_phy_data data = {
+		.cb = cb,
+		.skb = skb,
+		.s_idx = cb->args[0],
+		.idx = 0,
+	};
+
+	pr_debug("%s\n", __func__);
+
+	wpan_phy_for_each(ieee802154_dump_phy_iter, &data);
+
+	cb->args[0] = data.idx;
+
+	return skb->len;
+}
+
+static int ieee802154_add_iface(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct sk_buff *msg;
+	struct wpan_phy *phy;
+	const char *name;
+	const char *devname;
+	int rc = -ENOBUFS;
+	struct net_device *dev;
+
+	pr_debug("%s\n", __func__);
+
+	if (!info->attrs[IEEE802154_ATTR_PHY_NAME])
+		return -EINVAL;
+
+	name = nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
+	if (name[nla_len(info->attrs[IEEE802154_ATTR_PHY_NAME]) - 1] != '\0')
+		return -EINVAL; /* phy name should be null-terminated */
+
+	if (info->attrs[IEEE802154_ATTR_DEV_NAME]) {
+		devname = nla_data(info->attrs[IEEE802154_ATTR_DEV_NAME]);
+		if (devname[nla_len(info->attrs[IEEE802154_ATTR_DEV_NAME]) - 1]
+				!= '\0')
+			return -EINVAL; /* phy name should be null-terminated */
+	} else  {
+		devname = "wpan%d";
+	}
+
+	if (strlen(devname) >= IFNAMSIZ)
+		return -ENAMETOOLONG;
+
+	phy = wpan_phy_find(name);
+	if (!phy)
+		return -ENODEV;
+
+	msg = ieee802154_nl_new_reply(info, 0, IEEE802154_ADD_IFACE);
+	if (!msg)
+		goto out_dev;
+
+	if (!phy->add_iface) {
+		rc = -EINVAL;
+		goto nla_put_failure;
+	}
+
+	dev = phy->add_iface(phy, devname);
+	if (IS_ERR(dev)) {
+		rc = PTR_ERR(dev);
+		goto nla_put_failure;
+	}
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy));
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, dev->name);
+
+	dev_put(dev);
+
+	wpan_phy_put(phy);
+
+	return ieee802154_nl_reply(msg, info);
+
+nla_put_failure:
+	nlmsg_free(msg);
+out_dev:
+	wpan_phy_put(phy);
+	return rc;
+}
+
+static int ieee802154_del_iface(struct sk_buff *skb,
+		struct genl_info *info)
+{
+	struct sk_buff *msg;
+	struct wpan_phy *phy;
+	const char *name;
+	int rc;
+	struct net_device *dev;
+
+	pr_debug("%s\n", __func__);
+
+	if (!info->attrs[IEEE802154_ATTR_DEV_NAME])
+		return -EINVAL;
+
+	name = nla_data(info->attrs[IEEE802154_ATTR_DEV_NAME]);
+	if (name[nla_len(info->attrs[IEEE802154_ATTR_DEV_NAME]) - 1] != '\0')
+		return -EINVAL; /* name should be null-terminated */
+
+	dev = dev_get_by_name(genl_info_net(info), name);
+	if (!dev)
+		return -ENODEV;
+
+	phy = ieee802154_mlme_ops(dev)->get_phy(dev);
+	BUG_ON(!phy);
+
+	rc = -EINVAL;
+	/* phy name is optional, but should be checked if it's given */
+	if (info->attrs[IEEE802154_ATTR_PHY_NAME]) {
+		struct wpan_phy *phy2;
+
+		const char *pname =
+			nla_data(info->attrs[IEEE802154_ATTR_PHY_NAME]);
+		if (pname[nla_len(info->attrs[IEEE802154_ATTR_PHY_NAME]) - 1]
+				!= '\0')
+			/* name should be null-terminated */
+			goto out_dev;
+
+		phy2 = wpan_phy_find(pname);
+		if (!phy2)
+			goto out_dev;
+
+		if (phy != phy2) {
+			wpan_phy_put(phy2);
+			goto out_dev;
+		}
+	}
+
+	rc = -ENOBUFS;
+
+	msg = ieee802154_nl_new_reply(info, 0, IEEE802154_DEL_IFACE);
+	if (!msg)
+		goto out_dev;
+
+	if (!phy->del_iface) {
+		rc = -EINVAL;
+		goto nla_put_failure;
+	}
+
+	rtnl_lock();
+	phy->del_iface(phy, dev);
+
+	/* We don't have device anymore */
+	dev_put(dev);
+	dev = NULL;
+
+	rtnl_unlock();
+
+
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_PHY_NAME, wpan_phy_name(phy));
+	NLA_PUT_STRING(msg, IEEE802154_ATTR_DEV_NAME, name);
+
+	wpan_phy_put(phy);
+
+	return ieee802154_nl_reply(msg, info);
+
+nla_put_failure:
+	nlmsg_free(msg);
+out_dev:
+	wpan_phy_put(phy);
+	if (dev)
+		dev_put(dev);
+
+	return rc;
+}
+
+static struct genl_ops ieee802154_phy_ops[] = {
+	IEEE802154_DUMP(IEEE802154_LIST_PHY, ieee802154_list_phy,
+							ieee802154_dump_phy),
+	IEEE802154_OP(IEEE802154_ADD_IFACE, ieee802154_add_iface),
+	IEEE802154_OP(IEEE802154_DEL_IFACE, ieee802154_del_iface),
+};
+
+/*
+ * No need to unregister as family unregistration will do it.
+ */
+int nl802154_phy_register(void)
+{
+	int i;
+	int rc;
+
+	for (i = 0; i < ARRAY_SIZE(ieee802154_phy_ops); i++) {
+		rc = genl_register_ops(&nl802154_family,
+				&ieee802154_phy_ops[i]);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
diff --git a/net/ieee802154/nl_policy.c b/net/ieee802154/nl_policy.c
index 2363ebe..6adda4d 100644
--- a/net/ieee802154/nl_policy.c
+++ b/net/ieee802154/nl_policy.c
@@ -27,6 +27,7 @@
 const struct nla_policy ieee802154_policy[IEEE802154_ATTR_MAX + 1] = {
 	[IEEE802154_ATTR_DEV_NAME] = { .type = NLA_STRING, },
 	[IEEE802154_ATTR_DEV_INDEX] = { .type = NLA_U32, },
+	[IEEE802154_ATTR_PHY_NAME] = { .type = NLA_STRING, },
 
 	[IEEE802154_ATTR_STATUS] = { .type = NLA_U8, },
 	[IEEE802154_ATTR_SHORT_ADDR] = { .type = NLA_U16, },
@@ -50,5 +51,6 @@
 	[IEEE802154_ATTR_CHANNELS] = { .type = NLA_U32, },
 	[IEEE802154_ATTR_DURATION] = { .type = NLA_U8, },
 	[IEEE802154_ATTR_ED_LIST] = { .len = 27 },
+	[IEEE802154_ATTR_CHANNEL_PAGE_LIST] = { .len = 32 * 4, },
 };
 
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
index 30e74ee..9c9b85c 100644
--- a/net/ieee802154/raw.c
+++ b/net/ieee802154/raw.c
@@ -191,7 +191,7 @@
 	if (err)
 		goto done;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (flags & MSG_TRUNC)
 		copied = skb->len;
@@ -206,7 +206,6 @@
 static int raw_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
diff --git a/net/ieee802154/wpan-class.c b/net/ieee802154/wpan-class.c
index f306604..2686912 100644
--- a/net/ieee802154/wpan-class.c
+++ b/net/ieee802154/wpan-class.c
@@ -22,6 +22,8 @@
 
 #include <net/wpan-phy.h>
 
+#include "ieee802154.h"
+
 #define MASTER_SHOW_COMPLEX(name, format_string, args...)		\
 static ssize_t name ## _show(struct device *dev,			\
 			    struct device_attribute *attr, char *buf)	\
@@ -30,7 +32,7 @@
 	int ret;							\
 									\
 	mutex_lock(&phy->pib_lock);					\
-	ret = sprintf(buf, format_string "\n", args);			\
+	ret = snprintf(buf, PAGE_SIZE, format_string "\n", args);	\
 	mutex_unlock(&phy->pib_lock);					\
 	return ret;							\
 }
@@ -40,12 +42,30 @@
 
 MASTER_SHOW(current_channel, "%d");
 MASTER_SHOW(current_page, "%d");
-MASTER_SHOW(channels_supported, "%#x");
 MASTER_SHOW_COMPLEX(transmit_power, "%d +- %d dB",
 	((signed char) (phy->transmit_power << 2)) >> 2,
 	(phy->transmit_power >> 6) ? (phy->transmit_power >> 6) * 3 : 1 );
 MASTER_SHOW(cca_mode, "%d");
 
+static ssize_t channels_supported_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct wpan_phy *phy = container_of(dev, struct wpan_phy, dev);
+	int ret;
+	int i, len = 0;
+
+	mutex_lock(&phy->pib_lock);
+	for (i = 0; i < 32; i++) {
+		ret = snprintf(buf + len, PAGE_SIZE - len,
+				"%#09x\n", phy->channels_supported[i]);
+		if (ret < 0)
+			break;
+		len += ret;
+	}
+	mutex_unlock(&phy->pib_lock);
+	return len;
+}
+
 static struct device_attribute pmib_attrs[] = {
 	__ATTR_RO(current_channel),
 	__ATTR_RO(current_page),
@@ -91,6 +111,31 @@
 }
 EXPORT_SYMBOL(wpan_phy_find);
 
+struct wpan_phy_iter_data {
+	int (*fn)(struct wpan_phy *phy, void *data);
+	void *data;
+};
+
+static int wpan_phy_iter(struct device *dev, void *_data)
+{
+	struct wpan_phy_iter_data *wpid = _data;
+	struct wpan_phy *phy = container_of(dev, struct wpan_phy, dev);
+	return wpid->fn(phy, wpid->data);
+}
+
+int wpan_phy_for_each(int (*fn)(struct wpan_phy *phy, void *data),
+		void *data)
+{
+	struct wpan_phy_iter_data wpid = {
+		.fn = fn,
+		.data = data,
+	};
+
+	return class_for_each_device(&wpan_phy_class, NULL,
+			&wpid, wpan_phy_iter);
+}
+EXPORT_SYMBOL(wpan_phy_for_each);
+
 static int wpan_phy_idx_valid(int idx)
 {
 	return idx >= 0;
@@ -118,14 +163,15 @@
 
 	phy->dev.class = &wpan_phy_class;
 
+	phy->current_channel = -1; /* not initialised */
+	phy->current_page = 0; /* for compatibility */
+
 	return phy;
 }
 EXPORT_SYMBOL(wpan_phy_alloc);
 
-int wpan_phy_register(struct device *parent, struct wpan_phy *phy)
+int wpan_phy_register(struct wpan_phy *phy)
 {
-	phy->dev.parent = parent;
-
 	return device_add(&phy->dev);
 }
 EXPORT_SYMBOL(wpan_phy_register);
@@ -144,16 +190,31 @@
 
 static int __init wpan_phy_class_init(void)
 {
-	return class_register(&wpan_phy_class);
+	int rc;
+	rc = class_register(&wpan_phy_class);
+	if (rc)
+		goto err;
+
+	rc = ieee802154_nl_init();
+	if (rc)
+		goto err_nl;
+
+	return 0;
+err_nl:
+	class_unregister(&wpan_phy_class);
+err:
+	return rc;
 }
 subsys_initcall(wpan_phy_class_init);
 
 static void __exit wpan_phy_class_exit(void)
 {
+	ieee802154_nl_exit();
 	class_unregister(&wpan_phy_class);
 }
 module_exit(wpan_phy_class_exit);
 
-MODULE_DESCRIPTION("IEEE 802.15.4 device class");
 MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("IEEE 802.15.4 configuration interface");
+MODULE_AUTHOR("Dmitry Eremin-Solenikov");
 
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 57737b8..7d12c6a 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -174,12 +174,12 @@
 	/* We may need to bind the socket. */
 	lock_sock(sk);
 	inet = inet_sk(sk);
-	if (!inet->num) {
+	if (!inet->inet_num) {
 		if (sk->sk_prot->get_port(sk, 0)) {
 			release_sock(sk);
 			return -EAGAIN;
 		}
-		inet->sport = htons(inet->num);
+		inet->inet_sport = htons(inet->inet_num);
 	}
 	release_sock(sk);
 	return 0;
@@ -262,7 +262,8 @@
  *	Create an inet socket.
  */
 
-static int inet_create(struct net *net, struct socket *sock, int protocol)
+static int inet_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	struct inet_protosw *answer;
@@ -325,7 +326,7 @@
 	}
 
 	err = -EPERM;
-	if (answer->capability > 0 && !capable(answer->capability))
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
 		goto out_rcu_unlock;
 
 	err = -EAFNOSUPPORT;
@@ -354,7 +355,7 @@
 	inet->is_icsk = (INET_PROTOSW_ICSK & answer_flags) != 0;
 
 	if (SOCK_RAW == sock->type) {
-		inet->num = protocol;
+		inet->inet_num = protocol;
 		if (IPPROTO_RAW == protocol)
 			inet->hdrincl = 1;
 	}
@@ -364,7 +365,7 @@
 	else
 		inet->pmtudisc = IP_PMTUDISC_WANT;
 
-	inet->id = 0;
+	inet->inet_id = 0;
 
 	sock_init_data(sock, sk);
 
@@ -381,13 +382,13 @@
 
 	sk_refcnt_debug_inc(sk);
 
-	if (inet->num) {
+	if (inet->inet_num) {
 		/* It assumes that any protocol which allows
 		 * the user to assign a number at socket
 		 * creation time automatically
 		 * shares.
 		 */
-		inet->sport = htons(inet->num);
+		inet->inet_sport = htons(inet->inet_num);
 		/* Add to protocol hash chains. */
 		sk->sk_prot->hash(sk);
 	}
@@ -494,27 +495,27 @@
 
 	/* Check these errors (active socket, double bind). */
 	err = -EINVAL;
-	if (sk->sk_state != TCP_CLOSE || inet->num)
+	if (sk->sk_state != TCP_CLOSE || inet->inet_num)
 		goto out_release_sock;
 
-	inet->rcv_saddr = inet->saddr = addr->sin_addr.s_addr;
+	inet->inet_rcv_saddr = inet->inet_saddr = addr->sin_addr.s_addr;
 	if (chk_addr_ret == RTN_MULTICAST || chk_addr_ret == RTN_BROADCAST)
-		inet->saddr = 0;  /* Use device */
+		inet->inet_saddr = 0;  /* Use device */
 
 	/* Make sure we are allowed to bind here. */
 	if (sk->sk_prot->get_port(sk, snum)) {
-		inet->saddr = inet->rcv_saddr = 0;
+		inet->inet_saddr = inet->inet_rcv_saddr = 0;
 		err = -EADDRINUSE;
 		goto out_release_sock;
 	}
 
-	if (inet->rcv_saddr)
+	if (inet->inet_rcv_saddr)
 		sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
 	if (snum)
 		sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
-	inet->sport = htons(inet->num);
-	inet->daddr = 0;
-	inet->dport = 0;
+	inet->inet_sport = htons(inet->inet_num);
+	inet->inet_daddr = 0;
+	inet->inet_dport = 0;
 	sk_dst_reset(sk);
 	err = 0;
 out_release_sock:
@@ -532,7 +533,7 @@
 	if (uaddr->sa_family == AF_UNSPEC)
 		return sk->sk_prot->disconnect(sk, flags);
 
-	if (!inet_sk(sk)->num && inet_autobind(sk))
+	if (!inet_sk(sk)->inet_num && inet_autobind(sk))
 		return -EAGAIN;
 	return sk->sk_prot->connect(sk, (struct sockaddr *)uaddr, addr_len);
 }
@@ -685,21 +686,21 @@
 {
 	struct sock *sk		= sock->sk;
 	struct inet_sock *inet	= inet_sk(sk);
-	struct sockaddr_in *sin	= (struct sockaddr_in *)uaddr;
+	DECLARE_SOCKADDR(struct sockaddr_in *, sin, uaddr);
 
 	sin->sin_family = AF_INET;
 	if (peer) {
-		if (!inet->dport ||
+		if (!inet->inet_dport ||
 		    (((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_SYN_SENT)) &&
 		     peer == 1))
 			return -ENOTCONN;
-		sin->sin_port = inet->dport;
-		sin->sin_addr.s_addr = inet->daddr;
+		sin->sin_port = inet->inet_dport;
+		sin->sin_addr.s_addr = inet->inet_daddr;
 	} else {
-		__be32 addr = inet->rcv_saddr;
+		__be32 addr = inet->inet_rcv_saddr;
 		if (!addr)
-			addr = inet->saddr;
-		sin->sin_port = inet->sport;
+			addr = inet->inet_saddr;
+		sin->sin_port = inet->inet_sport;
 		sin->sin_addr.s_addr = addr;
 	}
 	memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
@@ -714,7 +715,7 @@
 	struct sock *sk = sock->sk;
 
 	/* We may need to bind the socket. */
-	if (!inet_sk(sk)->num && inet_autobind(sk))
+	if (!inet_sk(sk)->inet_num && inet_autobind(sk))
 		return -EAGAIN;
 
 	return sk->sk_prot->sendmsg(iocb, sk, msg, size);
@@ -728,7 +729,7 @@
 	struct sock *sk = sock->sk;
 
 	/* We may need to bind the socket. */
-	if (!inet_sk(sk)->num && inet_autobind(sk))
+	if (!inet_sk(sk)->inet_num && inet_autobind(sk))
 		return -EAGAIN;
 
 	if (sk->sk_prot->sendpage)
@@ -931,7 +932,7 @@
 #endif
 };
 
-static struct net_proto_family inet_family_ops = {
+static const struct net_proto_family inet_family_ops = {
 	.family = PF_INET,
 	.create = inet_create,
 	.owner	= THIS_MODULE,
@@ -947,7 +948,6 @@
 		.protocol =   IPPROTO_TCP,
 		.prot =       &tcp_prot,
 		.ops =        &inet_stream_ops,
-		.capability = -1,
 		.no_check =   0,
 		.flags =      INET_PROTOSW_PERMANENT |
 			      INET_PROTOSW_ICSK,
@@ -958,7 +958,6 @@
 		.protocol =   IPPROTO_UDP,
 		.prot =       &udp_prot,
 		.ops =        &inet_dgram_ops,
-		.capability = -1,
 		.no_check =   UDP_CSUM_DEFAULT,
 		.flags =      INET_PROTOSW_PERMANENT,
        },
@@ -969,7 +968,6 @@
 	       .protocol =   IPPROTO_IP,	/* wild card */
 	       .prot =       &raw_prot,
 	       .ops =        &inet_sockraw_ops,
-	       .capability = CAP_NET_RAW,
 	       .no_check =   UDP_CSUM_DEFAULT,
 	       .flags =      INET_PROTOSW_REUSE,
        }
@@ -1059,9 +1057,9 @@
 	struct inet_sock *inet = inet_sk(sk);
 	int err;
 	struct rtable *rt;
-	__be32 old_saddr = inet->saddr;
+	__be32 old_saddr = inet->inet_saddr;
 	__be32 new_saddr;
-	__be32 daddr = inet->daddr;
+	__be32 daddr = inet->inet_daddr;
 
 	if (inet->opt && inet->opt->srr)
 		daddr = inet->opt->faddr;
@@ -1071,7 +1069,7 @@
 			       RT_CONN_FLAGS(sk),
 			       sk->sk_bound_dev_if,
 			       sk->sk_protocol,
-			       inet->sport, inet->dport, sk, 0);
+			       inet->inet_sport, inet->inet_dport, sk, 0);
 	if (err)
 		return err;
 
@@ -1087,7 +1085,7 @@
 		       __func__, &old_saddr, &new_saddr);
 	}
 
-	inet->saddr = inet->rcv_saddr = new_saddr;
+	inet->inet_saddr = inet->inet_rcv_saddr = new_saddr;
 
 	/*
 	 * XXX The only one ugly spot where we need to
@@ -1113,7 +1111,7 @@
 		return 0;
 
 	/* Reroute. */
-	daddr = inet->daddr;
+	daddr = inet->inet_daddr;
 	if (inet->opt && inet->opt->srr)
 		daddr = inet->opt->faddr;
 {
@@ -1123,7 +1121,7 @@
 		.nl_u = {
 			.ip4_u = {
 				.daddr	= daddr,
-				.saddr	= inet->saddr,
+				.saddr	= inet->inet_saddr,
 				.tos	= RT_CONN_FLAGS(sk),
 			},
 		},
@@ -1131,8 +1129,8 @@
 		.flags = inet_sk_flowi_flags(sk),
 		.uli_u = {
 			.ports = {
-				.sport = inet->sport,
-				.dport = inet->dport,
+				.sport = inet->inet_sport,
+				.dport = inet->inet_dport,
 			},
 		},
 	};
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index 5c66270..7ed3e4a 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -1,3 +1,4 @@
+#include <crypto/hash.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <net/ip.h>
@@ -5,10 +6,67 @@
 #include <net/ah.h>
 #include <linux/crypto.h>
 #include <linux/pfkeyv2.h>
-#include <linux/spinlock.h>
+#include <linux/scatterlist.h>
 #include <net/icmp.h>
 #include <net/protocol.h>
 
+struct ah_skb_cb {
+	struct xfrm_skb_cb xfrm;
+	void *tmp;
+};
+
+#define AH_SKB_CB(__skb) ((struct ah_skb_cb *)&((__skb)->cb[0]))
+
+static void *ah_alloc_tmp(struct crypto_ahash *ahash, int nfrags,
+			  unsigned int size)
+{
+	unsigned int len;
+
+	len = size + crypto_ahash_digestsize(ahash) +
+	      (crypto_ahash_alignmask(ahash) &
+	       ~(crypto_tfm_ctx_alignment() - 1));
+
+	len = ALIGN(len, crypto_tfm_ctx_alignment());
+
+	len += sizeof(struct ahash_request) + crypto_ahash_reqsize(ahash);
+	len = ALIGN(len, __alignof__(struct scatterlist));
+
+	len += sizeof(struct scatterlist) * nfrags;
+
+	return kmalloc(len, GFP_ATOMIC);
+}
+
+static inline u8 *ah_tmp_auth(void *tmp, unsigned int offset)
+{
+	return tmp + offset;
+}
+
+static inline u8 *ah_tmp_icv(struct crypto_ahash *ahash, void *tmp,
+			     unsigned int offset)
+{
+	return PTR_ALIGN((u8 *)tmp + offset, crypto_ahash_alignmask(ahash) + 1);
+}
+
+static inline struct ahash_request *ah_tmp_req(struct crypto_ahash *ahash,
+					       u8 *icv)
+{
+	struct ahash_request *req;
+
+	req = (void *)PTR_ALIGN(icv + crypto_ahash_digestsize(ahash),
+				crypto_tfm_ctx_alignment());
+
+	ahash_request_set_tfm(req, ahash);
+
+	return req;
+}
+
+static inline struct scatterlist *ah_req_sg(struct crypto_ahash *ahash,
+					     struct ahash_request *req)
+{
+	return (void *)ALIGN((unsigned long)(req + 1) +
+			     crypto_ahash_reqsize(ahash),
+			     __alignof__(struct scatterlist));
+}
 
 /* Clear mutable options and find final destination to substitute
  * into IP header for icv calculation. Options are already checked
@@ -54,20 +112,72 @@
 	return 0;
 }
 
+static void ah_output_done(struct crypto_async_request *base, int err)
+{
+	u8 *icv;
+	struct iphdr *iph;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = skb_dst(skb)->xfrm;
+	struct ah_data *ahp = x->data;
+	struct iphdr *top_iph = ip_hdr(skb);
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	int ihl = ip_hdrlen(skb);
+
+	iph = AH_SKB_CB(skb)->tmp;
+	icv = ah_tmp_icv(ahp->ahash, iph, ihl);
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
+
+	top_iph->tos = iph->tos;
+	top_iph->ttl = iph->ttl;
+	top_iph->frag_off = iph->frag_off;
+	if (top_iph->ihl != 5) {
+		top_iph->daddr = iph->daddr;
+		memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
+	}
+
+	err = ah->nexthdr;
+
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_output_resume(skb, err);
+}
+
 static int ah_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err;
+	int nfrags;
+	int ihl;
+	u8 *icv;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
 	struct iphdr *iph, *top_iph;
 	struct ip_auth_hdr *ah;
 	struct ah_data *ahp;
-	union {
-		struct iphdr	iph;
-		char 		buf[60];
-	} tmp_iph;
+
+	ahp = x->data;
+	ahash = ahp->ahash;
+
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
 
 	skb_push(skb, -skb_network_offset(skb));
+	ah = ip_auth_hdr(skb);
+	ihl = ip_hdrlen(skb);
+
+	err = -ENOMEM;
+	iph = ah_alloc_tmp(ahash, nfrags, ihl);
+	if (!iph)
+		goto out;
+
+	icv = ah_tmp_icv(ahash, iph, ihl);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
+
 	top_iph = ip_hdr(skb);
-	iph = &tmp_iph.iph;
 
 	iph->tos = top_iph->tos;
 	iph->ttl = top_iph->ttl;
@@ -78,10 +188,9 @@
 		memcpy(iph+1, top_iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
 		err = ip_clear_mutable_options(top_iph, &top_iph->daddr);
 		if (err)
-			goto error;
+			goto out_free;
 	}
 
-	ah = ip_auth_hdr(skb);
 	ah->nexthdr = *skb_mac_header(skb);
 	*skb_mac_header(skb) = IPPROTO_AH;
 
@@ -91,20 +200,31 @@
 	top_iph->ttl = 0;
 	top_iph->check = 0;
 
-	ahp = x->data;
 	ah->hdrlen  = (XFRM_ALIGN8(sizeof(*ah) + ahp->icv_trunc_len) >> 2) - 2;
 
 	ah->reserved = 0;
 	ah->spi = x->id.spi;
 	ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output);
 
-	spin_lock_bh(&x->lock);
-	err = ah_mac_digest(ahp, skb, ah->auth_data);
-	memcpy(ah->auth_data, ahp->work_icv, ahp->icv_trunc_len);
-	spin_unlock_bh(&x->lock);
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
 
-	if (err)
-		goto error;
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah_output_done, skb);
+
+	AH_SKB_CB(skb)->tmp = iph;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
+	}
+
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
 
 	top_iph->tos = iph->tos;
 	top_iph->ttl = iph->ttl;
@@ -114,28 +234,67 @@
 		memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
 	}
 
-	err = 0;
-
-error:
+out_free:
+	kfree(iph);
+out:
 	return err;
 }
 
+static void ah_input_done(struct crypto_async_request *base, int err)
+{
+	u8 *auth_data;
+	u8 *icv;
+	struct iphdr *work_iph;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = xfrm_input_state(skb);
+	struct ah_data *ahp = x->data;
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	int ihl = ip_hdrlen(skb);
+	int ah_hlen = (ah->hdrlen + 2) << 2;
+
+	work_iph = AH_SKB_CB(skb)->tmp;
+	auth_data = ah_tmp_auth(work_iph, ihl);
+	icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len);
+
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
+	if (err)
+		goto out;
+
+	skb->network_header += ah_hlen;
+	memcpy(skb_network_header(skb), work_iph, ihl);
+	__skb_pull(skb, ah_hlen + ihl);
+	skb_set_transport_header(skb, -ihl);
+
+	err = ah->nexthdr;
+out:
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_input_resume(skb, err);
+}
+
 static int ah_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int ah_hlen;
 	int ihl;
 	int nexthdr;
-	int err = -EINVAL;
-	struct iphdr *iph;
+	int nfrags;
+	u8 *auth_data;
+	u8 *icv;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
+	struct iphdr *iph, *work_iph;
 	struct ip_auth_hdr *ah;
 	struct ah_data *ahp;
-	char work_buf[60];
+	int err = -ENOMEM;
 
 	if (!pskb_may_pull(skb, sizeof(*ah)))
 		goto out;
 
 	ah = (struct ip_auth_hdr *)skb->data;
 	ahp = x->data;
+	ahash = ahp->ahash;
+
 	nexthdr = ah->nexthdr;
 	ah_hlen = (ah->hdrlen + 2) << 2;
 
@@ -156,9 +315,24 @@
 
 	ah = (struct ip_auth_hdr *)skb->data;
 	iph = ip_hdr(skb);
+	ihl = ip_hdrlen(skb);
 
-	ihl = skb->data - skb_network_header(skb);
-	memcpy(work_buf, iph, ihl);
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
+
+	work_iph = ah_alloc_tmp(ahash, nfrags, ihl + ahp->icv_trunc_len);
+	if (!work_iph)
+		goto out;
+
+	auth_data = ah_tmp_auth(work_iph, ihl);
+	icv = ah_tmp_icv(ahash, auth_data, ahp->icv_trunc_len);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	memcpy(work_iph, iph, ihl);
+	memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
 
 	iph->ttl = 0;
 	iph->tos = 0;
@@ -166,35 +340,44 @@
 	iph->check = 0;
 	if (ihl > sizeof(*iph)) {
 		__be32 dummy;
-		if (ip_clear_mutable_options(iph, &dummy))
-			goto out;
-	}
-
-	spin_lock(&x->lock);
-	{
-		u8 auth_data[MAX_AH_AUTH_LEN];
-
-		memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
-		skb_push(skb, ihl);
-		err = ah_mac_digest(ahp, skb, ah->auth_data);
+		err = ip_clear_mutable_options(iph, &dummy);
 		if (err)
-			goto unlock;
-		if (memcmp(ahp->work_icv, auth_data, ahp->icv_trunc_len))
-			err = -EBADMSG;
+			goto out_free;
 	}
-unlock:
-	spin_unlock(&x->lock);
 
+	skb_push(skb, ihl);
+
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
+
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah_input_done, skb);
+
+	AH_SKB_CB(skb)->tmp = work_iph;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
+	}
+
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
 	if (err)
-		goto out;
+		goto out_free;
 
 	skb->network_header += ah_hlen;
-	memcpy(skb_network_header(skb), work_buf, ihl);
-	skb->transport_header = skb->network_header;
+	memcpy(skb_network_header(skb), work_iph, ihl);
 	__skb_pull(skb, ah_hlen + ihl);
+	skb_set_transport_header(skb, -ihl);
 
-	return nexthdr;
+	err = nexthdr;
 
+out_free:
+	kfree (work_iph);
 out:
 	return err;
 }
@@ -222,7 +405,7 @@
 {
 	struct ah_data *ahp = NULL;
 	struct xfrm_algo_desc *aalg_desc;
-	struct crypto_hash *tfm;
+	struct crypto_ahash *ahash;
 
 	if (!x->aalg)
 		goto error;
@@ -231,44 +414,40 @@
 		goto error;
 
 	ahp = kzalloc(sizeof(*ahp), GFP_KERNEL);
-	if (ahp == NULL)
+	if (!ahp)
 		return -ENOMEM;
 
-	tfm = crypto_alloc_hash(x->aalg->alg_name, 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(tfm))
+	ahash = crypto_alloc_ahash(x->aalg->alg_name, 0, 0);
+	if (IS_ERR(ahash))
 		goto error;
 
-	ahp->tfm = tfm;
-	if (crypto_hash_setkey(tfm, x->aalg->alg_key,
-			       (x->aalg->alg_key_len + 7) / 8))
+	ahp->ahash = ahash;
+	if (crypto_ahash_setkey(ahash, x->aalg->alg_key,
+				(x->aalg->alg_key_len + 7) / 8))
 		goto error;
 
 	/*
 	 * Lookup the algorithm description maintained by xfrm_algo,
 	 * verify crypto transform properties, and store information
 	 * we need for AH processing.  This lookup cannot fail here
-	 * after a successful crypto_alloc_hash().
+	 * after a successful crypto_alloc_ahash().
 	 */
 	aalg_desc = xfrm_aalg_get_byname(x->aalg->alg_name, 0);
 	BUG_ON(!aalg_desc);
 
 	if (aalg_desc->uinfo.auth.icv_fullbits/8 !=
-	    crypto_hash_digestsize(tfm)) {
+	    crypto_ahash_digestsize(ahash)) {
 		printk(KERN_INFO "AH: %s digestsize %u != %hu\n",
-		       x->aalg->alg_name, crypto_hash_digestsize(tfm),
+		       x->aalg->alg_name, crypto_ahash_digestsize(ahash),
 		       aalg_desc->uinfo.auth.icv_fullbits/8);
 		goto error;
 	}
 
 	ahp->icv_full_len = aalg_desc->uinfo.auth.icv_fullbits/8;
-	ahp->icv_trunc_len = aalg_desc->uinfo.auth.icv_truncbits/8;
+	ahp->icv_trunc_len = x->aalg->alg_trunc_len/8;
 
 	BUG_ON(ahp->icv_trunc_len > MAX_AH_AUTH_LEN);
 
-	ahp->work_icv = kmalloc(ahp->icv_full_len, GFP_KERNEL);
-	if (!ahp->work_icv)
-		goto error;
-
 	x->props.header_len = XFRM_ALIGN8(sizeof(struct ip_auth_hdr) +
 					  ahp->icv_trunc_len);
 	if (x->props.mode == XFRM_MODE_TUNNEL)
@@ -279,8 +458,7 @@
 
 error:
 	if (ahp) {
-		kfree(ahp->work_icv);
-		crypto_free_hash(ahp->tfm);
+		crypto_free_ahash(ahp->ahash);
 		kfree(ahp);
 	}
 	return -EINVAL;
@@ -293,8 +471,7 @@
 	if (!ahp)
 		return;
 
-	kfree(ahp->work_icv);
-	crypto_free_hash(ahp->tfm);
+	crypto_free_ahash(ahp->ahash);
 	kfree(ahp);
 }
 
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 4e80f33..c95cd93 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -1240,7 +1240,7 @@
 	arp_proc_init();
 #ifdef CONFIG_SYSCTL
 	neigh_sysctl_register(NULL, &arp_tbl.parms, NET_IPV4,
-			      NET_IPV4_NEIGH, "ipv4", NULL, NULL);
+			      NET_IPV4_NEIGH, "ipv4", NULL);
 #endif
 	register_netdevice_notifier(&arp_netdev_notifier);
 }
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 039cc1f..1e029dc 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -2017,7 +2017,7 @@
  * values on failure.
  *
  */
-int cipso_v4_delopt(struct ip_options **opt_ptr)
+static int cipso_v4_delopt(struct ip_options **opt_ptr)
 {
 	int hdr_delta = 0;
 	struct ip_options *opt = *opt_ptr;
diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c
index 5e6c5a0..fb24658 100644
--- a/net/ipv4/datagram.c
+++ b/net/ipv4/datagram.c
@@ -39,7 +39,7 @@
 	sk_dst_reset(sk);
 
 	oif = sk->sk_bound_dev_if;
-	saddr = inet->saddr;
+	saddr = inet->inet_saddr;
 	if (ipv4_is_multicast(usin->sin_addr.s_addr)) {
 		if (!oif)
 			oif = inet->mc_index;
@@ -49,7 +49,7 @@
 	err = ip_route_connect(&rt, usin->sin_addr.s_addr, saddr,
 			       RT_CONN_FLAGS(sk), oif,
 			       sk->sk_protocol,
-			       inet->sport, usin->sin_port, sk, 1);
+			       inet->inet_sport, usin->sin_port, sk, 1);
 	if (err) {
 		if (err == -ENETUNREACH)
 			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
@@ -60,14 +60,14 @@
 		ip_rt_put(rt);
 		return -EACCES;
 	}
-	if (!inet->saddr)
-		inet->saddr = rt->rt_src;	/* Update source address */
-	if (!inet->rcv_saddr)
-		inet->rcv_saddr = rt->rt_src;
-	inet->daddr = rt->rt_dst;
-	inet->dport = usin->sin_port;
+	if (!inet->inet_saddr)
+		inet->inet_saddr = rt->rt_src;	/* Update source address */
+	if (!inet->inet_rcv_saddr)
+		inet->inet_rcv_saddr = rt->rt_src;
+	inet->inet_daddr = rt->rt_dst;
+	inet->inet_dport = usin->sin_port;
 	sk->sk_state = TCP_ESTABLISHED;
-	inet->id = jiffies;
+	inet->inet_id = jiffies;
 
 	sk_dst_set(sk, &rt->u.dst);
 	return(0);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 5df2f6a..5cdbc10 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -140,11 +140,11 @@
 #endif
 	dev_put(dev);
 	if (!idev->dead)
-		printk("Freeing alive in_device %p\n", idev);
-	else {
+		pr_err("Freeing alive in_device %p\n", idev);
+	else
 		kfree(idev);
-	}
 }
+EXPORT_SYMBOL(in_dev_finish_destroy);
 
 static struct in_device *inetdev_init(struct net_device *dev)
 {
@@ -159,7 +159,8 @@
 			sizeof(in_dev->cnf));
 	in_dev->cnf.sysctl = NULL;
 	in_dev->dev = dev;
-	if ((in_dev->arp_parms = neigh_parms_alloc(dev, &arp_tbl)) == NULL)
+	in_dev->arp_parms = neigh_parms_alloc(dev, &arp_tbl);
+	if (!in_dev->arp_parms)
 		goto out_kfree;
 	if (IPV4_DEVCONF(in_dev->cnf, FORWARDING))
 		dev_disable_lro(dev);
@@ -405,13 +406,15 @@
 {
 	struct net_device *dev;
 	struct in_device *in_dev = NULL;
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(net, ifindex);
+
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, ifindex);
 	if (dev)
 		in_dev = in_dev_get(dev);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return in_dev;
 }
+EXPORT_SYMBOL(inetdev_by_index);
 
 /* Called only from RTNL semaphored context. No locks. */
 
@@ -557,7 +560,7 @@
  *	Determine a default network mask, based on the IP address.
  */
 
-static __inline__ int inet_abc_len(__be32 addr)
+static inline int inet_abc_len(__be32 addr)
 {
 	int rc = -1;	/* Something else, probably a multicast. */
 
@@ -646,13 +649,15 @@
 	rtnl_lock();
 
 	ret = -ENODEV;
-	if ((dev = __dev_get_by_name(net, ifr.ifr_name)) == NULL)
+	dev = __dev_get_by_name(net, ifr.ifr_name);
+	if (!dev)
 		goto done;
 
 	if (colon)
 		*colon = ':';
 
-	if ((in_dev = __in_dev_get_rtnl(dev)) != NULL) {
+	in_dev = __in_dev_get_rtnl(dev);
+	if (in_dev) {
 		if (tryaddrmatch) {
 			/* Matthias Andree */
 			/* compare label and address (4.4BSD style) */
@@ -720,7 +725,8 @@
 
 		if (!ifa) {
 			ret = -ENOBUFS;
-			if ((ifa = inet_alloc_ifa()) == NULL)
+			ifa = inet_alloc_ifa();
+			if (!ifa)
 				break;
 			if (colon)
 				memcpy(ifa->ifa_label, ifr.ifr_name, IFNAMSIZ);
@@ -822,10 +828,10 @@
 	struct ifreq ifr;
 	int done = 0;
 
-	if (!in_dev || (ifa = in_dev->ifa_list) == NULL)
+	if (!in_dev)
 		goto out;
 
-	for (; ifa; ifa = ifa->ifa_next) {
+	for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
 		if (!buf) {
 			done += sizeof(ifr);
 			continue;
@@ -875,36 +881,33 @@
 		if (!addr)
 			addr = ifa->ifa_local;
 	} endfor_ifa(in_dev);
-no_in_dev:
-	rcu_read_unlock();
 
 	if (addr)
-		goto out;
+		goto out_unlock;
+no_in_dev:
 
 	/* Not loopback addresses on loopback should be preferred
 	   in this case. It is importnat that lo is the first interface
 	   in dev_base list.
 	 */
-	read_lock(&dev_base_lock);
-	rcu_read_lock();
-	for_each_netdev(net, dev) {
-		if ((in_dev = __in_dev_get_rcu(dev)) == NULL)
+	for_each_netdev_rcu(net, dev) {
+		in_dev = __in_dev_get_rcu(dev);
+		if (!in_dev)
 			continue;
 
 		for_primary_ifa(in_dev) {
 			if (ifa->ifa_scope != RT_SCOPE_LINK &&
 			    ifa->ifa_scope <= scope) {
 				addr = ifa->ifa_local;
-				goto out_unlock_both;
+				goto out_unlock;
 			}
 		} endfor_ifa(in_dev);
 	}
-out_unlock_both:
-	read_unlock(&dev_base_lock);
+out_unlock:
 	rcu_read_unlock();
-out:
 	return addr;
 }
+EXPORT_SYMBOL(inet_select_addr);
 
 static __be32 confirm_addr_indev(struct in_device *in_dev, __be32 dst,
 			      __be32 local, int scope)
@@ -940,7 +943,7 @@
 		}
 	} endfor_ifa(in_dev);
 
-	return same? addr : 0;
+	return same ? addr : 0;
 }
 
 /*
@@ -961,17 +964,16 @@
 		return confirm_addr_indev(in_dev, dst, local, scope);
 
 	net = dev_net(in_dev->dev);
-	read_lock(&dev_base_lock);
 	rcu_read_lock();
-	for_each_netdev(net, dev) {
-		if ((in_dev = __in_dev_get_rcu(dev))) {
+	for_each_netdev_rcu(net, dev) {
+		in_dev = __in_dev_get_rcu(dev);
+		if (in_dev) {
 			addr = confirm_addr_indev(in_dev, dst, local, scope);
 			if (addr)
 				break;
 		}
 	}
 	rcu_read_unlock();
-	read_unlock(&dev_base_lock);
 
 	return addr;
 }
@@ -984,14 +986,16 @@
 {
 	return blocking_notifier_chain_register(&inetaddr_chain, nb);
 }
+EXPORT_SYMBOL(register_inetaddr_notifier);
 
 int unregister_inetaddr_notifier(struct notifier_block *nb)
 {
 	return blocking_notifier_chain_unregister(&inetaddr_chain, nb);
 }
+EXPORT_SYMBOL(unregister_inetaddr_notifier);
 
-/* Rename ifa_labels for a device name change. Make some effort to preserve existing
- * alias numbering and to create unique labels if possible.
+/* Rename ifa_labels for a device name change. Make some effort to preserve
+ * existing alias numbering and to create unique labels if possible.
 */
 static void inetdev_changename(struct net_device *dev, struct in_device *in_dev)
 {
@@ -1010,11 +1014,10 @@
 			sprintf(old, ":%d", named);
 			dot = old;
 		}
-		if (strlen(dot) + strlen(dev->name) < IFNAMSIZ) {
+		if (strlen(dot) + strlen(dev->name) < IFNAMSIZ)
 			strcat(ifa->ifa_label, dot);
-		} else {
+		else
 			strcpy(ifa->ifa_label + (IFNAMSIZ - strlen(dot) - 1), dot);
-		}
 skip:
 		rtmsg_ifa(RTM_NEWADDR, ifa, NULL, 0);
 	}
@@ -1061,8 +1064,9 @@
 		if (!inetdev_valid_mtu(dev->mtu))
 			break;
 		if (dev->flags & IFF_LOOPBACK) {
-			struct in_ifaddr *ifa;
-			if ((ifa = inet_alloc_ifa()) != NULL) {
+			struct in_ifaddr *ifa = inet_alloc_ifa();
+
+			if (ifa) {
 				ifa->ifa_local =
 				  ifa->ifa_address = htonl(INADDR_LOOPBACK);
 				ifa->ifa_prefixlen = 8;
@@ -1170,38 +1174,54 @@
 static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(skb->sk);
-	int idx, ip_idx;
+	int h, s_h;
+	int idx, s_idx;
+	int ip_idx, s_ip_idx;
 	struct net_device *dev;
 	struct in_device *in_dev;
 	struct in_ifaddr *ifa;
-	int s_ip_idx, s_idx = cb->args[0];
+	struct hlist_head *head;
+	struct hlist_node *node;
 
-	s_ip_idx = ip_idx = cb->args[1];
-	idx = 0;
-	for_each_netdev(net, dev) {
-		if (idx < s_idx)
-			goto cont;
-		if (idx > s_idx)
-			s_ip_idx = 0;
-		if ((in_dev = __in_dev_get_rtnl(dev)) == NULL)
-			goto cont;
+	s_h = cb->args[0];
+	s_idx = idx = cb->args[1];
+	s_ip_idx = ip_idx = cb->args[2];
 
-		for (ifa = in_dev->ifa_list, ip_idx = 0; ifa;
-		     ifa = ifa->ifa_next, ip_idx++) {
-			if (ip_idx < s_ip_idx)
-				continue;
-			if (inet_fill_ifaddr(skb, ifa, NETLINK_CB(cb->skb).pid,
+	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
+		idx = 0;
+		head = &net->dev_index_head[h];
+		rcu_read_lock();
+		hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
+			if (idx < s_idx)
+				goto cont;
+			if (idx > s_idx)
+				s_ip_idx = 0;
+			in_dev = __in_dev_get_rcu(dev);
+			if (!in_dev)
+				goto cont;
+
+			for (ifa = in_dev->ifa_list, ip_idx = 0; ifa;
+			     ifa = ifa->ifa_next, ip_idx++) {
+				if (ip_idx < s_ip_idx)
+					continue;
+				if (inet_fill_ifaddr(skb, ifa,
+					     NETLINK_CB(cb->skb).pid,
 					     cb->nlh->nlmsg_seq,
-					     RTM_NEWADDR, NLM_F_MULTI) <= 0)
-				goto done;
-		}
+					     RTM_NEWADDR, NLM_F_MULTI) <= 0) {
+					rcu_read_unlock();
+					goto done;
+				}
+			}
 cont:
-		idx++;
+			idx++;
+		}
+		rcu_read_unlock();
 	}
 
 done:
-	cb->args[0] = idx;
-	cb->args[1] = ip_idx;
+	cb->args[0] = h;
+	cb->args[1] = idx;
+	cb->args[2] = ip_idx;
 
 	return skb->len;
 }
@@ -1239,18 +1259,18 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		struct in_device *in_dev;
-		rcu_read_lock();
+
 		in_dev = __in_dev_get_rcu(dev);
 		if (in_dev && !test_bit(i, in_dev->cnf.state))
 			in_dev->cnf.data[i] = net->ipv4.devconf_dflt->data[i];
-		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
+/* called with RTNL locked */
 static void inet_forward_change(struct net *net)
 {
 	struct net_device *dev;
@@ -1259,7 +1279,6 @@
 	IPV4_DEVCONF_ALL(net, ACCEPT_REDIRECTS) = !on;
 	IPV4_DEVCONF_DFLT(net, FORWARDING) = on;
 
-	read_lock(&dev_base_lock);
 	for_each_netdev(net, dev) {
 		struct in_device *in_dev;
 		if (on)
@@ -1270,7 +1289,6 @@
 			IN_DEV_CONF_SET(in_dev, FORWARDING, on);
 		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
 }
 
 static int devinet_conf_proc(ctl_table *ctl, int write,
@@ -1293,58 +1311,6 @@
 	return ret;
 }
 
-static int devinet_conf_sysctl(ctl_table *table,
-			       void __user *oldval, size_t __user *oldlenp,
-			       void __user *newval, size_t newlen)
-{
-	struct ipv4_devconf *cnf;
-	struct net *net;
-	int *valp = table->data;
-	int new;
-	int i;
-
-	if (!newval || !newlen)
-		return 0;
-
-	if (newlen != sizeof(int))
-		return -EINVAL;
-
-	if (get_user(new, (int __user *)newval))
-		return -EFAULT;
-
-	if (new == *valp)
-		return 0;
-
-	if (oldval && oldlenp) {
-		size_t len;
-
-		if (get_user(len, oldlenp))
-			return -EFAULT;
-
-		if (len) {
-			if (len > table->maxlen)
-				len = table->maxlen;
-			if (copy_to_user(oldval, valp, len))
-				return -EFAULT;
-			if (put_user(len, oldlenp))
-				return -EFAULT;
-		}
-	}
-
-	*valp = new;
-
-	cnf = table->extra1;
-	net = table->extra2;
-	i = (int *)table->data - cnf->data;
-
-	set_bit(i, cnf->state);
-
-	if (cnf == net->ipv4.devconf_dflt)
-		devinet_copy_dflt_conf(net, i);
-
-	return 1;
-}
-
 static int devinet_sysctl_forward(ctl_table *ctl, int write,
 				  void __user *buffer,
 				  size_t *lenp, loff_t *ppos)
@@ -1390,47 +1356,28 @@
 	return ret;
 }
 
-int ipv4_doint_and_flush_strategy(ctl_table *table,
-				  void __user *oldval, size_t __user *oldlenp,
-				  void __user *newval, size_t newlen)
-{
-	int ret = devinet_conf_sysctl(table, oldval, oldlenp, newval, newlen);
-	struct net *net = table->extra2;
-
-	if (ret == 1)
-		rt_cache_flush(net, 0);
-
-	return ret;
-}
-
-
-#define DEVINET_SYSCTL_ENTRY(attr, name, mval, proc, sysctl) \
+#define DEVINET_SYSCTL_ENTRY(attr, name, mval, proc) \
 	{ \
-		.ctl_name	= NET_IPV4_CONF_ ## attr, \
 		.procname	= name, \
 		.data		= ipv4_devconf.data + \
 				  NET_IPV4_CONF_ ## attr - 1, \
 		.maxlen		= sizeof(int), \
 		.mode		= mval, \
 		.proc_handler	= proc, \
-		.strategy	= sysctl, \
 		.extra1		= &ipv4_devconf, \
 	}
 
 #define DEVINET_SYSCTL_RW_ENTRY(attr, name) \
-	DEVINET_SYSCTL_ENTRY(attr, name, 0644, devinet_conf_proc, \
-			     devinet_conf_sysctl)
+	DEVINET_SYSCTL_ENTRY(attr, name, 0644, devinet_conf_proc)
 
 #define DEVINET_SYSCTL_RO_ENTRY(attr, name) \
-	DEVINET_SYSCTL_ENTRY(attr, name, 0444, devinet_conf_proc, \
-			     devinet_conf_sysctl)
+	DEVINET_SYSCTL_ENTRY(attr, name, 0444, devinet_conf_proc)
 
-#define DEVINET_SYSCTL_COMPLEX_ENTRY(attr, name, proc, sysctl) \
-	DEVINET_SYSCTL_ENTRY(attr, name, 0644, proc, sysctl)
+#define DEVINET_SYSCTL_COMPLEX_ENTRY(attr, name, proc) \
+	DEVINET_SYSCTL_ENTRY(attr, name, 0644, proc)
 
 #define DEVINET_SYSCTL_FLUSHING_ENTRY(attr, name) \
-	DEVINET_SYSCTL_COMPLEX_ENTRY(attr, name, ipv4_doint_and_flush, \
-				     ipv4_doint_and_flush_strategy)
+	DEVINET_SYSCTL_COMPLEX_ENTRY(attr, name, ipv4_doint_and_flush)
 
 static struct devinet_sysctl_table {
 	struct ctl_table_header *sysctl_header;
@@ -1439,8 +1386,7 @@
 } devinet_sysctl = {
 	.devinet_vars = {
 		DEVINET_SYSCTL_COMPLEX_ENTRY(FORWARDING, "forwarding",
-					     devinet_sysctl_forward,
-					     devinet_conf_sysctl),
+					     devinet_sysctl_forward),
 		DEVINET_SYSCTL_RO_ENTRY(MC_FORWARDING, "mc_forwarding"),
 
 		DEVINET_SYSCTL_RW_ENTRY(ACCEPT_REDIRECTS, "accept_redirects"),
@@ -1450,6 +1396,7 @@
 		DEVINET_SYSCTL_RW_ENTRY(SEND_REDIRECTS, "send_redirects"),
 		DEVINET_SYSCTL_RW_ENTRY(ACCEPT_SOURCE_ROUTE,
 					"accept_source_route"),
+		DEVINET_SYSCTL_RW_ENTRY(ACCEPT_LOCAL, "accept_local"),
 		DEVINET_SYSCTL_RW_ENTRY(PROXY_ARP, "proxy_arp"),
 		DEVINET_SYSCTL_RW_ENTRY(MEDIUM_ID, "medium_id"),
 		DEVINET_SYSCTL_RW_ENTRY(BOOTP_RELAY, "bootp_relay"),
@@ -1471,7 +1418,7 @@
 };
 
 static int __devinet_sysctl_register(struct net *net, char *dev_name,
-		int ctl_name, struct ipv4_devconf *p)
+					struct ipv4_devconf *p)
 {
 	int i;
 	struct devinet_sysctl_table *t;
@@ -1479,9 +1426,9 @@
 #define DEVINET_CTL_PATH_DEV	3
 
 	struct ctl_path devinet_ctl_path[] = {
-		{ .procname = "net", .ctl_name = CTL_NET, },
-		{ .procname = "ipv4", .ctl_name = NET_IPV4, },
-		{ .procname = "conf", .ctl_name = NET_IPV4_CONF, },
+		{ .procname = "net",  },
+		{ .procname = "ipv4", },
+		{ .procname = "conf", },
 		{ /* to be set */ },
 		{ },
 	};
@@ -1506,7 +1453,6 @@
 		goto free;
 
 	devinet_ctl_path[DEVINET_CTL_PATH_DEV].procname = t->dev_name;
-	devinet_ctl_path[DEVINET_CTL_PATH_DEV].ctl_name = ctl_name;
 
 	t->sysctl_header = register_net_sysctl_table(net, devinet_ctl_path,
 			t->devinet_vars);
@@ -1540,9 +1486,9 @@
 static void devinet_sysctl_register(struct in_device *idev)
 {
 	neigh_sysctl_register(idev->dev, idev->arp_parms, NET_IPV4,
-			NET_IPV4_NEIGH, "ipv4", NULL, NULL);
+			NET_IPV4_NEIGH, "ipv4", NULL);
 	__devinet_sysctl_register(dev_net(idev->dev), idev->dev->name,
-			idev->dev->ifindex, &idev->cnf);
+					&idev->cnf);
 }
 
 static void devinet_sysctl_unregister(struct in_device *idev)
@@ -1553,14 +1499,12 @@
 
 static struct ctl_table ctl_forward_entry[] = {
 	{
-		.ctl_name	= NET_IPV4_FORWARD,
 		.procname	= "ip_forward",
 		.data		= &ipv4_devconf.data[
 					NET_IPV4_CONF_FORWARDING - 1],
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= devinet_sysctl_forward,
-		.strategy	= devinet_conf_sysctl,
 		.extra1		= &ipv4_devconf,
 		.extra2		= &init_net,
 	},
@@ -1568,8 +1512,8 @@
 };
 
 static __net_initdata struct ctl_path net_ipv4_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "net", },
+	{ .procname = "ipv4", },
 	{ },
 };
 #endif
@@ -1587,7 +1531,7 @@
 	all = &ipv4_devconf;
 	dflt = &ipv4_devconf_dflt;
 
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		all = kmemdup(all, sizeof(ipv4_devconf), GFP_KERNEL);
 		if (all == NULL)
 			goto err_alloc_all;
@@ -1608,13 +1552,11 @@
 	}
 
 #ifdef CONFIG_SYSCTL
-	err = __devinet_sysctl_register(net, "all",
-			NET_PROTO_CONF_ALL, all);
+	err = __devinet_sysctl_register(net, "all", all);
 	if (err < 0)
 		goto err_reg_all;
 
-	err = __devinet_sysctl_register(net, "default",
-			NET_PROTO_CONF_DEFAULT, dflt);
+	err = __devinet_sysctl_register(net, "default", dflt);
 	if (err < 0)
 		goto err_reg_dflt;
 
@@ -1680,8 +1622,3 @@
 	rtnl_register(PF_INET, RTM_GETADDR, NULL, inet_dump_ifaddr);
 }
 
-EXPORT_SYMBOL(in_dev_finish_destroy);
-EXPORT_SYMBOL(inet_select_addr);
-EXPORT_SYMBOL(inetdev_by_index);
-EXPORT_SYMBOL(register_inetaddr_notifier);
-EXPORT_SYMBOL(unregister_inetaddr_notifier);
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 12f7287..1948895 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -530,7 +530,7 @@
 		}
 
 		err = crypto_aead_setauthsize(
-			aead, aalg_desc->uinfo.auth.icv_truncbits / 8);
+			aead, x->aalg->alg_trunc_len / 8);
 		if (err)
 			goto free_key;
 	}
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index aa00398..3323168 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -125,7 +125,7 @@
 #endif
 	tb = fib_get_table(net, table);
 	if (FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
-		tb->tb_select_default(tb, flp, res);
+		fib_table_select_default(tb, flp, res);
 }
 
 static void fib_flush(struct net *net)
@@ -139,7 +139,7 @@
 	for (h = 0; h < FIB_TABLE_HASHSZ; h++) {
 		head = &net->ipv4.fib_table_hash[h];
 		hlist_for_each_entry(tb, node, head, tb_hlist)
-			flushed += tb->tb_flush(tb);
+			flushed += fib_table_flush(tb);
 	}
 
 	if (flushed)
@@ -162,7 +162,7 @@
 #endif
 
 	local_table = fib_get_table(net, RT_TABLE_LOCAL);
-	if (!local_table || local_table->tb_lookup(local_table, &fl, &res))
+	if (!local_table || fib_table_lookup(local_table, &fl, &res))
 		return NULL;
 	if (res.type != RTN_LOCAL)
 		goto out;
@@ -200,7 +200,7 @@
 	local_table = fib_get_table(net, RT_TABLE_LOCAL);
 	if (local_table) {
 		ret = RTN_UNICAST;
-		if (!local_table->tb_lookup(local_table, &fl, &res)) {
+		if (!fib_table_lookup(local_table, &fl, &res)) {
 			if (!dev || dev == res.fi->fib_dev)
 				ret = res.type;
 			fib_res_put(&res);
@@ -241,16 +241,17 @@
 			    .iif = oif };
 
 	struct fib_result res;
-	int no_addr, rpf;
+	int no_addr, rpf, accept_local;
 	int ret;
 	struct net *net;
 
-	no_addr = rpf = 0;
+	no_addr = rpf = accept_local = 0;
 	rcu_read_lock();
 	in_dev = __in_dev_get_rcu(dev);
 	if (in_dev) {
 		no_addr = in_dev->ifa_list == NULL;
 		rpf = IN_DEV_RPFILTER(in_dev);
+		accept_local = IN_DEV_ACCEPT_LOCAL(in_dev);
 	}
 	rcu_read_unlock();
 
@@ -260,8 +261,10 @@
 	net = dev_net(dev);
 	if (fib_lookup(net, &fl, &res))
 		goto last_resort;
-	if (res.type != RTN_UNICAST)
-		goto e_inval_res;
+	if (res.type != RTN_UNICAST) {
+		if (res.type != RTN_LOCAL || !accept_local)
+			goto e_inval_res;
+	}
 	*spec_dst = FIB_RES_PREFSRC(res);
 	fib_combine_itag(itag, &res);
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
@@ -476,13 +479,13 @@
 			if (cmd == SIOCDELRT) {
 				tb = fib_get_table(net, cfg.fc_table);
 				if (tb)
-					err = tb->tb_delete(tb, &cfg);
+					err = fib_table_delete(tb, &cfg);
 				else
 					err = -ESRCH;
 			} else {
 				tb = fib_new_table(net, cfg.fc_table);
 				if (tb)
-					err = tb->tb_insert(tb, &cfg);
+					err = fib_table_insert(tb, &cfg);
 				else
 					err = -ENOBUFS;
 			}
@@ -597,7 +600,7 @@
 		goto errout;
 	}
 
-	err = tb->tb_delete(tb, &cfg);
+	err = fib_table_delete(tb, &cfg);
 errout:
 	return err;
 }
@@ -619,7 +622,7 @@
 		goto errout;
 	}
 
-	err = tb->tb_insert(tb, &cfg);
+	err = fib_table_insert(tb, &cfg);
 errout:
 	return err;
 }
@@ -650,7 +653,7 @@
 			if (dumped)
 				memset(&cb->args[2], 0, sizeof(cb->args) -
 						 2 * sizeof(cb->args[0]));
-			if (tb->tb_dump(tb, skb, cb) < 0)
+			if (fib_table_dump(tb, skb, cb) < 0)
 				goto out;
 			dumped = 1;
 next:
@@ -704,9 +707,9 @@
 		cfg.fc_scope = RT_SCOPE_HOST;
 
 	if (cmd == RTM_NEWROUTE)
-		tb->tb_insert(tb, &cfg);
+		fib_table_insert(tb, &cfg);
 	else
-		tb->tb_delete(tb, &cfg);
+		fib_table_delete(tb, &cfg);
 }
 
 void fib_add_ifaddr(struct in_ifaddr *ifa)
@@ -835,7 +838,7 @@
 		local_bh_disable();
 
 		frn->tb_id = tb->tb_id;
-		frn->err = tb->tb_lookup(tb, &fl, &res);
+		frn->err = fib_table_lookup(tb, &fl, &res);
 
 		if (!frn->err) {
 			frn->prefixlen = res.prefixlen;
@@ -895,11 +898,11 @@
 	net->ipv4.fibnl = NULL;
 }
 
-static void fib_disable_ip(struct net_device *dev, int force)
+static void fib_disable_ip(struct net_device *dev, int force, int delay)
 {
 	if (fib_sync_down_dev(dev, force))
 		fib_flush(dev_net(dev));
-	rt_cache_flush(dev_net(dev), 0);
+	rt_cache_flush(dev_net(dev), delay);
 	arp_ifdown(dev);
 }
 
@@ -922,7 +925,7 @@
 			/* Last address was deleted from this interface.
 			   Disable IP.
 			 */
-			fib_disable_ip(dev, 1);
+			fib_disable_ip(dev, 1, 0);
 		} else {
 			rt_cache_flush(dev_net(dev), -1);
 		}
@@ -937,7 +940,7 @@
 	struct in_device *in_dev = __in_dev_get_rtnl(dev);
 
 	if (event == NETDEV_UNREGISTER) {
-		fib_disable_ip(dev, 2);
+		fib_disable_ip(dev, 2, -1);
 		return NOTIFY_DONE;
 	}
 
@@ -955,12 +958,15 @@
 		rt_cache_flush(dev_net(dev), -1);
 		break;
 	case NETDEV_DOWN:
-		fib_disable_ip(dev, 0);
+		fib_disable_ip(dev, 0, 0);
 		break;
 	case NETDEV_CHANGEMTU:
 	case NETDEV_CHANGE:
 		rt_cache_flush(dev_net(dev), 0);
 		break;
+	case NETDEV_UNREGISTER_BATCH:
+		rt_cache_flush_batch();
+		break;
 	}
 	return NOTIFY_DONE;
 }
@@ -1012,7 +1018,7 @@
 		head = &net->ipv4.fib_table_hash[i];
 		hlist_for_each_entry_safe(tb, node, tmp, head, tb_hlist) {
 			hlist_del(node);
-			tb->tb_flush(tb);
+			fib_table_flush(tb);
 			kfree(tb);
 		}
 	}
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index ecd3945..14972017b 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -242,8 +242,8 @@
 	return fz;
 }
 
-static int
-fn_hash_lookup(struct fib_table *tb, const struct flowi *flp, struct fib_result *res)
+int fib_table_lookup(struct fib_table *tb,
+		     const struct flowi *flp, struct fib_result *res)
 {
 	int err;
 	struct fn_zone *fz;
@@ -274,8 +274,8 @@
 	return err;
 }
 
-static void
-fn_hash_select_default(struct fib_table *tb, const struct flowi *flp, struct fib_result *res)
+void fib_table_select_default(struct fib_table *tb,
+			      const struct flowi *flp, struct fib_result *res)
 {
 	int order, last_idx;
 	struct hlist_node *node;
@@ -366,7 +366,7 @@
 	return NULL;
 }
 
-static int fn_hash_insert(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_insert(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct fn_hash *table = (struct fn_hash *) tb->tb_data;
 	struct fib_node *new_f = NULL;
@@ -544,8 +544,7 @@
 	return err;
 }
 
-
-static int fn_hash_delete(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_delete(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct fn_hash *table = (struct fn_hash *)tb->tb_data;
 	struct fib_node *f;
@@ -662,7 +661,7 @@
 	return found;
 }
 
-static int fn_hash_flush(struct fib_table *tb)
+int fib_table_flush(struct fib_table *tb)
 {
 	struct fn_hash *table = (struct fn_hash *) tb->tb_data;
 	struct fn_zone *fz;
@@ -743,7 +742,8 @@
 	return skb->len;
 }
 
-static int fn_hash_dump(struct fib_table *tb, struct sk_buff *skb, struct netlink_callback *cb)
+int fib_table_dump(struct fib_table *tb, struct sk_buff *skb,
+		   struct netlink_callback *cb)
 {
 	int m, s_m;
 	struct fn_zone *fz;
@@ -787,12 +787,7 @@
 
 	tb->tb_id = id;
 	tb->tb_default = -1;
-	tb->tb_lookup = fn_hash_lookup;
-	tb->tb_insert = fn_hash_insert;
-	tb->tb_delete = fn_hash_delete;
-	tb->tb_flush = fn_hash_flush;
-	tb->tb_select_default = fn_hash_select_default;
-	tb->tb_dump = fn_hash_dump;
+
 	memset(tb->tb_data, 0, sizeof(struct fn_hash));
 	return tb;
 }
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index 92d9d97..ca2d07b 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -94,7 +94,7 @@
 	if ((tbl = fib_get_table(rule->fr_net, rule->table)) == NULL)
 		goto errout;
 
-	err = tbl->tb_lookup(tbl, flp, (struct fib_result *) arg->result);
+	err = fib_table_lookup(tbl, flp, (struct fib_result *) arg->result);
 	if (err > 0)
 		err = -EAGAIN;
 errout:
@@ -284,7 +284,7 @@
 {
 	int err;
 
-	err = fib_default_rule_add(ops, 0, RT_TABLE_LOCAL, FIB_RULE_PERMANENT);
+	err = fib_default_rule_add(ops, 0, RT_TABLE_LOCAL, 0);
 	if (err < 0)
 		return err;
 	err = fib_default_rule_add(ops, 0x7FFE, RT_TABLE_MAIN, 0);
@@ -301,13 +301,9 @@
 	int err;
 	struct fib_rules_ops *ops;
 
-	ops = kmemdup(&fib4_rules_ops_template, sizeof(*ops), GFP_KERNEL);
-	if (ops == NULL)
-		return -ENOMEM;
-	INIT_LIST_HEAD(&ops->rules_list);
-	ops->fro_net = net;
-
-	fib_rules_register(ops);
+	ops = fib_rules_register(&fib4_rules_ops_template, net);
+	if (IS_ERR(ops))
+		return PTR_ERR(ops);
 
 	err = fib_default_rules_init(ops);
 	if (err < 0)
@@ -318,12 +314,10 @@
 fail:
 	/* also cleans all rules already added */
 	fib_rules_unregister(ops);
-	kfree(ops);
 	return err;
 }
 
 void __net_exit fib4_rules_exit(struct net *net)
 {
 	fib_rules_unregister(net->ipv4.rules_ops);
-	kfree(net->ipv4.rules_ops);
 }
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 9b096d6..ed19aa6 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -228,7 +228,7 @@
 	head = &fib_info_hash[hash];
 
 	hlist_for_each_entry(fi, node, head, fib_hash) {
-		if (fi->fib_net != nfi->fib_net)
+		if (!net_eq(fi->fib_net, nfi->fib_net))
 			continue;
 		if (fi->fib_nhs != nfi->fib_nhs)
 			continue;
@@ -1047,7 +1047,7 @@
 		return 0;
 
 	hlist_for_each_entry(fi, node, head, fib_lhash) {
-		if (fi->fib_net != net)
+		if (!net_eq(fi->fib_net, net))
 			continue;
 		if (fi->fib_prefsrc == local) {
 			fi->fib_flags |= RTNH_F_DEAD;
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 291bdf5..af5d897 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -1174,7 +1174,7 @@
 /*
  * Caller must hold RTNL.
  */
-static int fn_trie_insert(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_insert(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	struct fib_alias *fa, *new_fa;
@@ -1373,8 +1373,8 @@
 	return 1;
 }
 
-static int fn_trie_lookup(struct fib_table *tb, const struct flowi *flp,
-			  struct fib_result *res)
+int fib_table_lookup(struct fib_table *tb, const struct flowi *flp,
+		     struct fib_result *res)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	int ret;
@@ -1595,7 +1595,7 @@
 /*
  * Caller must hold RTNL.
  */
-static int fn_trie_delete(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_delete(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	u32 key, mask;
@@ -1786,7 +1786,7 @@
 /*
  * Caller must hold RTNL.
  */
-static int fn_trie_flush(struct fib_table *tb)
+int fib_table_flush(struct fib_table *tb)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	struct leaf *l, *ll = NULL;
@@ -1807,9 +1807,9 @@
 	return found;
 }
 
-static void fn_trie_select_default(struct fib_table *tb,
-				   const struct flowi *flp,
-				   struct fib_result *res)
+void fib_table_select_default(struct fib_table *tb,
+			      const struct flowi *flp,
+			      struct fib_result *res)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	int order, last_idx;
@@ -1952,8 +1952,8 @@
 	return skb->len;
 }
 
-static int fn_trie_dump(struct fib_table *tb, struct sk_buff *skb,
-			struct netlink_callback *cb)
+int fib_table_dump(struct fib_table *tb, struct sk_buff *skb,
+		   struct netlink_callback *cb)
 {
 	struct leaf *l;
 	struct trie *t = (struct trie *) tb->tb_data;
@@ -2020,12 +2020,6 @@
 
 	tb->tb_id = id;
 	tb->tb_default = -1;
-	tb->tb_lookup = fn_trie_lookup;
-	tb->tb_insert = fn_trie_insert;
-	tb->tb_delete = fn_trie_delete;
-	tb->tb_flush = fn_trie_flush;
-	tb->tb_select_default = fn_trie_select_default;
-	tb->tb_dump = fn_trie_dump;
 
 	t = (struct trie *) tb->tb_data;
 	memset(t, 0, sizeof(*t));
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 5bc13fe..fe11f60 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -501,15 +501,16 @@
 	if (!(rt->rt_flags & RTCF_LOCAL)) {
 		struct net_device *dev = NULL;
 
+		rcu_read_lock();
 		if (rt->fl.iif &&
 			net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr)
-			dev = dev_get_by_index(net, rt->fl.iif);
+			dev = dev_get_by_index_rcu(net, rt->fl.iif);
 
-		if (dev) {
+		if (dev)
 			saddr = inet_select_addr(dev, 0, RT_SCOPE_LINK);
-			dev_put(dev);
-		} else
+		else
 			saddr = 0;
+		rcu_read_unlock();
 	}
 
 	tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) |
@@ -1165,6 +1166,10 @@
 		sk->sk_sndbuf =
 			(2 * ((64 * 1024) + sizeof(struct sk_buff)));
 
+		/*
+		 * Speedup sock_wfree()
+		 */
+		sock_set_flag(sk, SOCK_USE_WRITE_QUEUE);
 		inet_sk(sk)->pmtudisc = IP_PMTUDISC_DONT;
 	}
 
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index d41e5de..76c0840 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -1899,8 +1899,9 @@
 	err = -EADDRNOTAVAIL;
 
 	for (pmc=inet->mc_list; pmc; pmc=pmc->next) {
-		if (pmc->multi.imr_multiaddr.s_addr == imr.imr_multiaddr.s_addr
-		    && pmc->multi.imr_ifindex == imr.imr_ifindex)
+		if ((pmc->multi.imr_multiaddr.s_addr ==
+		     imr.imr_multiaddr.s_addr) &&
+		    (pmc->multi.imr_ifindex == imr.imr_ifindex))
 			break;
 	}
 	if (!pmc) {		/* must have a prior join */
@@ -2311,9 +2312,10 @@
 	struct igmp_mc_iter_state *state = igmp_mc_seq_private(seq);
 
 	state->in_dev = NULL;
-	for_each_netdev(net, state->dev) {
+	for_each_netdev_rcu(net, state->dev) {
 		struct in_device *in_dev;
-		in_dev = in_dev_get(state->dev);
+
+		in_dev = __in_dev_get_rcu(state->dev);
 		if (!in_dev)
 			continue;
 		read_lock(&in_dev->mc_list_lock);
@@ -2323,7 +2325,6 @@
 			break;
 		}
 		read_unlock(&in_dev->mc_list_lock);
-		in_dev_put(in_dev);
 	}
 	return im;
 }
@@ -2333,16 +2334,15 @@
 	struct igmp_mc_iter_state *state = igmp_mc_seq_private(seq);
 	im = im->next;
 	while (!im) {
-		if (likely(state->in_dev != NULL)) {
+		if (likely(state->in_dev != NULL))
 			read_unlock(&state->in_dev->mc_list_lock);
-			in_dev_put(state->in_dev);
-		}
-		state->dev = next_net_device(state->dev);
+
+		state->dev = next_net_device_rcu(state->dev);
 		if (!state->dev) {
 			state->in_dev = NULL;
 			break;
 		}
-		state->in_dev = in_dev_get(state->dev);
+		state->in_dev = __in_dev_get_rcu(state->dev);
 		if (!state->in_dev)
 			continue;
 		read_lock(&state->in_dev->mc_list_lock);
@@ -2361,9 +2361,9 @@
 }
 
 static void *igmp_mc_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(rcu)
 {
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	return *pos ? igmp_mc_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
 }
 
@@ -2379,16 +2379,15 @@
 }
 
 static void igmp_mc_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(rcu)
 {
 	struct igmp_mc_iter_state *state = igmp_mc_seq_private(seq);
 	if (likely(state->in_dev != NULL)) {
 		read_unlock(&state->in_dev->mc_list_lock);
-		in_dev_put(state->in_dev);
 		state->in_dev = NULL;
 	}
 	state->dev = NULL;
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int igmp_mc_seq_show(struct seq_file *seq, void *v)
@@ -2462,9 +2461,9 @@
 
 	state->idev = NULL;
 	state->im = NULL;
-	for_each_netdev(net, state->dev) {
+	for_each_netdev_rcu(net, state->dev) {
 		struct in_device *idev;
-		idev = in_dev_get(state->dev);
+		idev = __in_dev_get_rcu(state->dev);
 		if (unlikely(idev == NULL))
 			continue;
 		read_lock(&idev->mc_list_lock);
@@ -2480,7 +2479,6 @@
 			spin_unlock_bh(&im->lock);
 		}
 		read_unlock(&idev->mc_list_lock);
-		in_dev_put(idev);
 	}
 	return psf;
 }
@@ -2494,16 +2492,15 @@
 		spin_unlock_bh(&state->im->lock);
 		state->im = state->im->next;
 		while (!state->im) {
-			if (likely(state->idev != NULL)) {
+			if (likely(state->idev != NULL))
 				read_unlock(&state->idev->mc_list_lock);
-				in_dev_put(state->idev);
-			}
-			state->dev = next_net_device(state->dev);
+
+			state->dev = next_net_device_rcu(state->dev);
 			if (!state->dev) {
 				state->idev = NULL;
 				goto out;
 			}
-			state->idev = in_dev_get(state->dev);
+			state->idev = __in_dev_get_rcu(state->dev);
 			if (!state->idev)
 				continue;
 			read_lock(&state->idev->mc_list_lock);
@@ -2528,8 +2525,9 @@
 }
 
 static void *igmp_mcf_seq_start(struct seq_file *seq, loff_t *pos)
+	__acquires(rcu)
 {
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	return *pos ? igmp_mcf_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
 }
 
@@ -2545,6 +2543,7 @@
 }
 
 static void igmp_mcf_seq_stop(struct seq_file *seq, void *v)
+	__releases(rcu)
 {
 	struct igmp_mcf_iter_state *state = igmp_mcf_seq_private(seq);
 	if (likely(state->im != NULL)) {
@@ -2553,11 +2552,10 @@
 	}
 	if (likely(state->idev != NULL)) {
 		read_unlock(&state->idev->mc_list_lock);
-		in_dev_put(state->idev);
 		state->idev = NULL;
 	}
 	state->dev = NULL;
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int igmp_mcf_seq_show(struct seq_file *seq, void *v)
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 537731b..ee16475 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -112,7 +112,7 @@
 					hashinfo->bhash_size)];
 			spin_lock(&head->lock);
 			inet_bind_bucket_for_each(tb, node, &head->chain)
-				if (ib_net(tb) == net && tb->port == rover) {
+				if (net_eq(ib_net(tb), net) && tb->port == rover) {
 					if (tb->fastreuse > 0 &&
 					    sk->sk_reuse &&
 					    sk->sk_state != TCP_LISTEN &&
@@ -158,7 +158,7 @@
 				hashinfo->bhash_size)];
 		spin_lock(&head->lock);
 		inet_bind_bucket_for_each(tb, node, &head->chain)
-			if (ib_net(tb) == net && tb->port == snum)
+			if (net_eq(ib_net(tb), net) && tb->port == snum)
 				goto tb_found;
 	}
 	tb = NULL;
@@ -358,6 +358,7 @@
 	const struct inet_request_sock *ireq = inet_rsk(req);
 	struct ip_options *opt = inet_rsk(req)->opt;
 	struct flowi fl = { .oif = sk->sk_bound_dev_if,
+			    .mark = sk->sk_mark,
 			    .nl_u = { .ip4_u =
 				      { .daddr = ((opt && opt->srr) ?
 						  opt->faddr :
@@ -367,7 +368,7 @@
 			    .proto = sk->sk_protocol,
 			    .flags = inet_sk_flowi_flags(sk),
 			    .uli_u = { .ports =
-				       { .sport = inet_sk(sk)->sport,
+				       { .sport = inet_sk(sk)->inet_sport,
 					 .dport = ireq->rmt_port } } };
 	struct net *net = sock_net(sk);
 
@@ -530,7 +531,7 @@
 					       &expire, &resend);
 				if (!expire &&
 				    (!resend ||
-				     !req->rsk_ops->rtx_syn_ack(parent, req) ||
+				     !req->rsk_ops->rtx_syn_ack(parent, req, NULL) ||
 				     inet_rsk(req)->acked)) {
 					unsigned long timeo;
 
@@ -574,9 +575,9 @@
 		newsk->sk_state = TCP_SYN_RECV;
 		newicsk->icsk_bind_hash = NULL;
 
-		inet_sk(newsk)->dport = inet_rsk(req)->rmt_port;
-		inet_sk(newsk)->num = ntohs(inet_rsk(req)->loc_port);
-		inet_sk(newsk)->sport = inet_rsk(req)->loc_port;
+		inet_sk(newsk)->inet_dport = inet_rsk(req)->rmt_port;
+		inet_sk(newsk)->inet_num = ntohs(inet_rsk(req)->loc_port);
+		inet_sk(newsk)->inet_sport = inet_rsk(req)->loc_port;
 		newsk->sk_write_space = sk_stream_write_space;
 
 		newicsk->icsk_retransmits = 0;
@@ -607,8 +608,8 @@
 	/* It cannot be in hash table! */
 	WARN_ON(!sk_unhashed(sk));
 
-	/* If it has not 0 inet_sk(sk)->num, it must be bound */
-	WARN_ON(inet_sk(sk)->num && !inet_csk(sk)->icsk_bind_hash);
+	/* If it has not 0 inet_sk(sk)->inet_num, it must be bound */
+	WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash);
 
 	sk->sk_prot->destroy(sk);
 
@@ -643,8 +644,8 @@
 	 * after validation is complete.
 	 */
 	sk->sk_state = TCP_LISTEN;
-	if (!sk->sk_prot->get_port(sk, inet->num)) {
-		inet->sport = htons(inet->num);
+	if (!sk->sk_prot->get_port(sk, inet->inet_num)) {
+		inet->inet_sport = htons(inet->inet_num);
 
 		sk_dst_reset(sk);
 		sk->sk_prot->hash(sk);
@@ -720,8 +721,8 @@
 	const struct inet_sock *inet = inet_sk(sk);
 
 	sin->sin_family		= AF_INET;
-	sin->sin_addr.s_addr	= inet->daddr;
-	sin->sin_port		= inet->dport;
+	sin->sin_addr.s_addr	= inet->inet_daddr;
+	sin->sin_port		= inet->inet_dport;
 }
 
 EXPORT_SYMBOL_GPL(inet_csk_addr2sockaddr);
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index a706a47..bdb78dd 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -116,10 +116,10 @@
 	r->id.idiag_cookie[0] = (u32)(unsigned long)sk;
 	r->id.idiag_cookie[1] = (u32)(((unsigned long)sk >> 31) >> 1);
 
-	r->id.idiag_sport = inet->sport;
-	r->id.idiag_dport = inet->dport;
-	r->id.idiag_src[0] = inet->rcv_saddr;
-	r->id.idiag_dst[0] = inet->daddr;
+	r->id.idiag_sport = inet->inet_sport;
+	r->id.idiag_dport = inet->inet_dport;
+	r->id.idiag_src[0] = inet->inet_rcv_saddr;
+	r->id.idiag_dst[0] = inet->inet_daddr;
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
 	if (r->idiag_family == AF_INET6) {
@@ -504,11 +504,11 @@
 		} else
 #endif
 		{
-			entry.saddr = &inet->rcv_saddr;
-			entry.daddr = &inet->daddr;
+			entry.saddr = &inet->inet_rcv_saddr;
+			entry.daddr = &inet->inet_daddr;
 		}
-		entry.sport = inet->num;
-		entry.dport = ntohs(inet->dport);
+		entry.sport = inet->inet_num;
+		entry.dport = ntohs(inet->inet_dport);
 		entry.userlocks = sk->sk_userlocks;
 
 		if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry))
@@ -584,7 +584,7 @@
 	if (tmo < 0)
 		tmo = 0;
 
-	r->id.idiag_sport = inet->sport;
+	r->id.idiag_sport = inet->inet_sport;
 	r->id.idiag_dport = ireq->rmt_port;
 	r->id.idiag_src[0] = ireq->loc_addr;
 	r->id.idiag_dst[0] = ireq->rmt_addr;
@@ -639,7 +639,7 @@
 
 	if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
 		bc = (struct rtattr *)(r + 1);
-		entry.sport = inet->num;
+		entry.sport = inet->inet_num;
 		entry.userlocks = sk->sk_userlocks;
 	}
 
@@ -732,7 +732,7 @@
 					continue;
 				}
 
-				if (r->id.idiag_sport != inet->sport &&
+				if (r->id.idiag_sport != inet->inet_sport &&
 				    r->id.idiag_sport)
 					goto next_listen;
 
@@ -774,7 +774,7 @@
 	if (!(r->idiag_states & ~(TCPF_LISTEN | TCPF_SYN_RECV)))
 		goto unlock;
 
-	for (i = s_i; i < hashinfo->ehash_size; i++) {
+	for (i = s_i; i <= hashinfo->ehash_mask; i++) {
 		struct inet_ehash_bucket *head = &hashinfo->ehash[i];
 		spinlock_t *lock = inet_ehash_lockp(hashinfo, i);
 		struct sock *sk;
@@ -797,10 +797,10 @@
 				goto next_normal;
 			if (!(r->idiag_states & (1 << sk->sk_state)))
 				goto next_normal;
-			if (r->id.idiag_sport != inet->sport &&
+			if (r->id.idiag_sport != inet->inet_sport &&
 			    r->id.idiag_sport)
 				goto next_normal;
-			if (r->id.idiag_dport != inet->dport &&
+			if (r->id.idiag_dport != inet->inet_dport &&
 			    r->id.idiag_dport)
 				goto next_normal;
 			if (inet_csk_diag_dump(sk, skb, cb) < 0) {
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 625cc5f..21e5e32 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -64,7 +64,7 @@
 
 	atomic_inc(&hashinfo->bsockets);
 
-	inet_sk(sk)->num = snum;
+	inet_sk(sk)->inet_num = snum;
 	sk_add_bind_node(sk, &tb->owners);
 	tb->num_owners++;
 	inet_csk(sk)->icsk_bind_hash = tb;
@@ -76,7 +76,7 @@
 static void __inet_put_port(struct sock *sk)
 {
 	struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
-	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->num,
+	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->inet_num,
 			hashinfo->bhash_size);
 	struct inet_bind_hashbucket *head = &hashinfo->bhash[bhash];
 	struct inet_bind_bucket *tb;
@@ -88,7 +88,7 @@
 	__sk_del_bind_node(sk);
 	tb->num_owners--;
 	inet_csk(sk)->icsk_bind_hash = NULL;
-	inet_sk(sk)->num = 0;
+	inet_sk(sk)->inet_num = 0;
 	inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
 	spin_unlock(&head->lock);
 }
@@ -105,7 +105,7 @@
 void __inet_inherit_port(struct sock *sk, struct sock *child)
 {
 	struct inet_hashinfo *table = sk->sk_prot->h.hashinfo;
-	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(child)->num,
+	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(child)->inet_num,
 			table->bhash_size);
 	struct inet_bind_hashbucket *head = &table->bhash[bhash];
 	struct inet_bind_bucket *tb;
@@ -126,9 +126,9 @@
 	int score = -1;
 	struct inet_sock *inet = inet_sk(sk);
 
-	if (net_eq(sock_net(sk), net) && inet->num == hnum &&
+	if (net_eq(sock_net(sk), net) && inet->inet_num == hnum &&
 			!ipv6_only_sock(sk)) {
-		__be32 rcv_saddr = inet->rcv_saddr;
+		__be32 rcv_saddr = inet->inet_rcv_saddr;
 		score = sk->sk_family == PF_INET ? 1 : 0;
 		if (rcv_saddr) {
 			if (rcv_saddr != daddr)
@@ -209,7 +209,7 @@
 	 * have wildcards anyways.
 	 */
 	unsigned int hash = inet_ehashfn(net, daddr, hnum, saddr, sport);
-	unsigned int slot = hash & (hashinfo->ehash_size - 1);
+	unsigned int slot = hash & hashinfo->ehash_mask;
 	struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
 
 	rcu_read_lock();
@@ -273,18 +273,20 @@
 {
 	struct inet_hashinfo *hinfo = death_row->hashinfo;
 	struct inet_sock *inet = inet_sk(sk);
-	__be32 daddr = inet->rcv_saddr;
-	__be32 saddr = inet->daddr;
+	__be32 daddr = inet->inet_rcv_saddr;
+	__be32 saddr = inet->inet_daddr;
 	int dif = sk->sk_bound_dev_if;
 	INET_ADDR_COOKIE(acookie, saddr, daddr)
-	const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport);
+	const __portpair ports = INET_COMBINED_PORTS(inet->inet_dport, lport);
 	struct net *net = sock_net(sk);
-	unsigned int hash = inet_ehashfn(net, daddr, lport, saddr, inet->dport);
+	unsigned int hash = inet_ehashfn(net, daddr, lport,
+					 saddr, inet->inet_dport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
 	spinlock_t *lock = inet_ehash_lockp(hinfo, hash);
 	struct sock *sk2;
 	const struct hlist_nulls_node *node;
 	struct inet_timewait_sock *tw;
+	int twrefcnt = 0;
 
 	spin_lock(lock);
 
@@ -312,25 +314,28 @@
 unique:
 	/* Must record num and sport now. Otherwise we will see
 	 * in hash table socket with a funny identity. */
-	inet->num = lport;
-	inet->sport = htons(lport);
+	inet->inet_num = lport;
+	inet->inet_sport = htons(lport);
 	sk->sk_hash = hash;
 	WARN_ON(!sk_unhashed(sk));
 	__sk_nulls_add_node_rcu(sk, &head->chain);
+	if (tw) {
+		twrefcnt = inet_twsk_unhash(tw);
+		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
+	}
 	spin_unlock(lock);
+	if (twrefcnt)
+		inet_twsk_put(tw);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 
 	if (twp) {
 		*twp = tw;
-		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
 	} else if (tw) {
 		/* Silly. Should hash-dance instead... */
 		inet_twsk_deschedule(tw, death_row);
-		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
 
 		inet_twsk_put(tw);
 	}
-
 	return 0;
 
 not_unique:
@@ -341,8 +346,9 @@
 static inline u32 inet_sk_port_offset(const struct sock *sk)
 {
 	const struct inet_sock *inet = inet_sk(sk);
-	return secure_ipv4_port_ephemeral(inet->rcv_saddr, inet->daddr,
-					  inet->dport);
+	return secure_ipv4_port_ephemeral(inet->inet_rcv_saddr,
+					  inet->inet_daddr,
+					  inet->inet_dport);
 }
 
 void __inet_hash_nolisten(struct sock *sk)
@@ -424,7 +430,7 @@
 		void (*hash)(struct sock *sk))
 {
 	struct inet_hashinfo *hinfo = death_row->hashinfo;
-	const unsigned short snum = inet_sk(sk)->num;
+	const unsigned short snum = inet_sk(sk)->inet_num;
 	struct inet_bind_hashbucket *head;
 	struct inet_bind_bucket *tb;
 	int ret;
@@ -452,7 +458,8 @@
 			 * unique enough.
 			 */
 			inet_bind_bucket_for_each(tb, node, &head->chain) {
-				if (ib_net(tb) == net && tb->port == port) {
+				if (net_eq(ib_net(tb), net) &&
+				    tb->port == port) {
 					if (tb->fastreuse >= 0)
 						goto next_port;
 					WARN_ON(hlist_empty(&tb->owners));
@@ -485,7 +492,7 @@
 		/* Head lock still held and bh's disabled */
 		inet_bind_hash(sk, tb, port);
 		if (sk_unhashed(sk)) {
-			inet_sk(sk)->sport = htons(port);
+			inet_sk(sk)->inet_sport = htons(port);
 			hash(sk);
 		}
 		spin_unlock(&head->lock);
diff --git a/net/ipv4/inet_lro.c b/net/ipv4/inet_lro.c
index 6a667da..47038cb 100644
--- a/net/ipv4/inet_lro.c
+++ b/net/ipv4/inet_lro.c
@@ -64,15 +64,15 @@
 	if (iph->ihl != IPH_LEN_WO_OPTIONS)
 		return -1;
 
-	if (tcph->cwr || tcph->ece || tcph->urg || !tcph->ack
-	    || tcph->rst || tcph->syn || tcph->fin)
+	if (tcph->cwr || tcph->ece || tcph->urg || !tcph->ack ||
+	    tcph->rst || tcph->syn || tcph->fin)
 		return -1;
 
 	if (INET_ECN_is_ce(ipv4_get_dsfield(iph)))
 		return -1;
 
-	if (tcph->doff != TCPH_LEN_WO_OPTIONS
-	    && tcph->doff != TCPH_LEN_W_TIMESTAMP)
+	if (tcph->doff != TCPH_LEN_WO_OPTIONS &&
+	    tcph->doff != TCPH_LEN_W_TIMESTAMP)
 		return -1;
 
 	/* check tcp options (only timestamp allowed) */
@@ -262,10 +262,10 @@
 			      struct iphdr *iph,
 			      struct tcphdr *tcph)
 {
-	if ((lro_desc->iph->saddr != iph->saddr)
-	    || (lro_desc->iph->daddr != iph->daddr)
-	    || (lro_desc->tcph->source != tcph->source)
-	    || (lro_desc->tcph->dest != tcph->dest))
+	if ((lro_desc->iph->saddr != iph->saddr) ||
+	    (lro_desc->iph->daddr != iph->daddr) ||
+	    (lro_desc->tcph->source != tcph->source) ||
+	    (lro_desc->tcph->dest != tcph->dest))
 		return -1;
 	return 0;
 }
@@ -339,9 +339,9 @@
 	u64 flags;
 	int vlan_hdr_len = 0;
 
-	if (!lro_mgr->get_skb_header
-	    || lro_mgr->get_skb_header(skb, (void *)&iph, (void *)&tcph,
-				       &flags, priv))
+	if (!lro_mgr->get_skb_header ||
+	    lro_mgr->get_skb_header(skb, (void *)&iph, (void *)&tcph,
+				    &flags, priv))
 		goto out;
 
 	if (!(flags & LRO_IPV4) || !(flags & LRO_TCP))
@@ -351,8 +351,8 @@
 	if (!lro_desc)
 		goto out;
 
-	if ((skb->protocol == htons(ETH_P_8021Q))
-	    && !(lro_mgr->features & LRO_F_EXTRACT_VLAN_ID))
+	if ((skb->protocol == htons(ETH_P_8021Q)) &&
+	    !(lro_mgr->features & LRO_F_EXTRACT_VLAN_ID))
 		vlan_hdr_len = VLAN_HLEN;
 
 	if (!lro_desc->active) { /* start new lro session */
@@ -446,9 +446,9 @@
 	int hdr_len = LRO_MAX_PG_HLEN;
 	int vlan_hdr_len = 0;
 
-	if (!lro_mgr->get_frag_header
-	    || lro_mgr->get_frag_header(frags, (void *)&mac_hdr, (void *)&iph,
-					(void *)&tcph, &flags, priv)) {
+	if (!lro_mgr->get_frag_header ||
+	    lro_mgr->get_frag_header(frags, (void *)&mac_hdr, (void *)&iph,
+				     (void *)&tcph, &flags, priv)) {
 		mac_hdr = page_address(frags->page) + frags->page_offset;
 		goto out1;
 	}
@@ -472,8 +472,8 @@
 		if (!skb)
 			goto out;
 
-		if ((skb->protocol == htons(ETH_P_8021Q))
-		    && !(lro_mgr->features & LRO_F_EXTRACT_VLAN_ID))
+		if ((skb->protocol == htons(ETH_P_8021Q)) &&
+		    !(lro_mgr->features & LRO_F_EXTRACT_VLAN_ID))
 			vlan_hdr_len = VLAN_HLEN;
 
 		iph = (void *)(skb->data + vlan_hdr_len);
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 13f0781..0fdf45e 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -14,22 +14,33 @@
 #include <net/inet_timewait_sock.h>
 #include <net/ip.h>
 
+
+/*
+ * unhash a timewait socket from established hash
+ * lock must be hold by caller
+ */
+int inet_twsk_unhash(struct inet_timewait_sock *tw)
+{
+	if (hlist_nulls_unhashed(&tw->tw_node))
+		return 0;
+
+	hlist_nulls_del_rcu(&tw->tw_node);
+	sk_nulls_node_init(&tw->tw_node);
+	return 1;
+}
+
 /* Must be called with locally disabled BHs. */
 static void __inet_twsk_kill(struct inet_timewait_sock *tw,
 			     struct inet_hashinfo *hashinfo)
 {
 	struct inet_bind_hashbucket *bhead;
 	struct inet_bind_bucket *tb;
+	int refcnt;
 	/* Unlink from established hashes. */
 	spinlock_t *lock = inet_ehash_lockp(hashinfo, tw->tw_hash);
 
 	spin_lock(lock);
-	if (hlist_nulls_unhashed(&tw->tw_node)) {
-		spin_unlock(lock);
-		return;
-	}
-	hlist_nulls_del_rcu(&tw->tw_node);
-	sk_nulls_node_init(&tw->tw_node);
+	refcnt = inet_twsk_unhash(tw);
 	spin_unlock(lock);
 
 	/* Disassociate with bind bucket. */
@@ -37,9 +48,12 @@
 			hashinfo->bhash_size)];
 	spin_lock(&bhead->lock);
 	tb = tw->tw_tb;
-	__hlist_del(&tw->tw_bind_node);
-	tw->tw_tb = NULL;
-	inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
+	if (tb) {
+		__hlist_del(&tw->tw_bind_node);
+		tw->tw_tb = NULL;
+		inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
+		refcnt++;
+	}
 	spin_unlock(&bhead->lock);
 #ifdef SOCK_REFCNT_DEBUG
 	if (atomic_read(&tw->tw_refcnt) != 1) {
@@ -47,7 +61,10 @@
 		       tw->tw_prot->name, tw, atomic_read(&tw->tw_refcnt));
 	}
 #endif
-	inet_twsk_put(tw);
+	while (refcnt) {
+		inet_twsk_put(tw);
+		refcnt--;
+	}
 }
 
 static noinline void inet_twsk_free(struct inet_timewait_sock *tw)
@@ -86,7 +103,7 @@
 	   Note, that any socket with inet->num != 0 MUST be bound in
 	   binding cache, even if it is closed.
 	 */
-	bhead = &hashinfo->bhash[inet_bhashfn(twsk_net(tw), inet->num,
+	bhead = &hashinfo->bhash[inet_bhashfn(twsk_net(tw), inet->inet_num,
 			hashinfo->bhash_size)];
 	spin_lock(&bhead->lock);
 	tw->tw_tb = icsk->icsk_bind_hash;
@@ -101,13 +118,22 @@
 	 * Should be done before removing sk from established chain
 	 * because readers are lockless and search established first.
 	 */
-	atomic_inc(&tw->tw_refcnt);
 	inet_twsk_add_node_rcu(tw, &ehead->twchain);
 
 	/* Step 3: Remove SK from established hash. */
 	if (__sk_nulls_del_node_init_rcu(sk))
 		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
 
+	/*
+	 * Notes :
+ 	 * - We initially set tw_refcnt to 0 in inet_twsk_alloc()
+	 * - We add one reference for the bhash link
+	 * - We add one reference for the ehash link
+	 * - We want this refcnt update done before allowing other
+	 *   threads to find this tw in ehash chain.
+	 */
+	atomic_add(1 + 1 + 1, &tw->tw_refcnt);
+
 	spin_unlock(lock);
 }
 
@@ -124,14 +150,14 @@
 		kmemcheck_annotate_bitfield(tw, flags);
 
 		/* Give us an identity. */
-		tw->tw_daddr	    = inet->daddr;
-		tw->tw_rcv_saddr    = inet->rcv_saddr;
+		tw->tw_daddr	    = inet->inet_daddr;
+		tw->tw_rcv_saddr    = inet->inet_rcv_saddr;
 		tw->tw_bound_dev_if = sk->sk_bound_dev_if;
-		tw->tw_num	    = inet->num;
+		tw->tw_num	    = inet->inet_num;
 		tw->tw_state	    = TCP_TIME_WAIT;
 		tw->tw_substate	    = state;
-		tw->tw_sport	    = inet->sport;
-		tw->tw_dport	    = inet->dport;
+		tw->tw_sport	    = inet->inet_sport;
+		tw->tw_dport	    = inet->inet_dport;
 		tw->tw_family	    = sk->sk_family;
 		tw->tw_reuse	    = sk->sk_reuse;
 		tw->tw_hash	    = sk->sk_hash;
@@ -139,7 +165,12 @@
 		tw->tw_transparent  = inet->transparent;
 		tw->tw_prot	    = sk->sk_prot_creator;
 		twsk_net_set(tw, hold_net(sock_net(sk)));
-		atomic_set(&tw->tw_refcnt, 1);
+		/*
+		 * Because we use RCU lookups, we should not set tw_refcnt
+		 * to a non null value before everything is setup for this
+		 * timewait socket.
+		 */
+		atomic_set(&tw->tw_refcnt, 0);
 		inet_twsk_dead_node_init(tw);
 		__module_get(tw->tw_prot->owner);
 	}
@@ -421,37 +452,46 @@
 
 EXPORT_SYMBOL_GPL(inet_twdr_twcal_tick);
 
-void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+void inet_twsk_purge(struct inet_hashinfo *hashinfo,
 		     struct inet_timewait_death_row *twdr, int family)
 {
 	struct inet_timewait_sock *tw;
 	struct sock *sk;
 	struct hlist_nulls_node *node;
-	int h;
+	unsigned int slot;
 
-	local_bh_disable();
-	for (h = 0; h < (hashinfo->ehash_size); h++) {
-		struct inet_ehash_bucket *head =
-			inet_ehash_bucket(hashinfo, h);
-		spinlock_t *lock = inet_ehash_lockp(hashinfo, h);
+	for (slot = 0; slot <= hashinfo->ehash_mask; slot++) {
+		struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
+restart_rcu:
+		rcu_read_lock();
 restart:
-		spin_lock(lock);
-		sk_nulls_for_each(sk, node, &head->twchain) {
-
+		sk_nulls_for_each_rcu(sk, node, &head->twchain) {
 			tw = inet_twsk(sk);
-			if (!net_eq(twsk_net(tw), net) ||
-			    tw->tw_family != family)
+			if ((tw->tw_family != family) ||
+				atomic_read(&twsk_net(tw)->count))
 				continue;
 
-			atomic_inc(&tw->tw_refcnt);
-			spin_unlock(lock);
+			if (unlikely(!atomic_inc_not_zero(&tw->tw_refcnt)))
+				continue;
+
+			if (unlikely((tw->tw_family != family) ||
+				     atomic_read(&twsk_net(tw)->count))) {
+				inet_twsk_put(tw);
+				goto restart;
+			}
+
+			rcu_read_unlock();
 			inet_twsk_deschedule(tw, twdr);
 			inet_twsk_put(tw);
-
-			goto restart;
+			goto restart_rcu;
 		}
-		spin_unlock(lock);
+		/* If the nulls value we got at the end of this lookup is
+		 * not the expected one, we must restart lookup.
+		 * We probably met an item that was moved to another chain.
+		 */
+		if (get_nulls_value(node) != slot)
+			goto restart;
+		rcu_read_unlock();
 	}
-	local_bh_enable();
 }
 EXPORT_SYMBOL_GPL(inet_twsk_purge);
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index b1fbe18..6bcfe52 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -67,9 +67,6 @@
  *		ip_id_count: idlock
  */
 
-/* Exported for inet_getid inline function.  */
-DEFINE_SPINLOCK(inet_peer_idlock);
-
 static struct kmem_cache *peer_cachep __read_mostly;
 
 #define node_height(x) x->avl_height
@@ -390,7 +387,7 @@
 	n->v4daddr = daddr;
 	atomic_set(&n->refcnt, 1);
 	atomic_set(&n->rid, 0);
-	n->ip_id_count = secure_ip_id(daddr);
+	atomic_set(&n->ip_id_count, secure_ip_id(daddr));
 	n->tcp_ts_stamp = 0;
 
 	write_lock_bh(&peer_pool_lock);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 575f9bd..86964b3 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -206,10 +206,11 @@
 		struct sk_buff *head = qp->q.fragments;
 
 		/* Send an ICMP "Fragment Reassembly Timeout" message. */
-		if ((head->dev = dev_get_by_index(net, qp->iif)) != NULL) {
+		rcu_read_lock();
+		head->dev = dev_get_by_index_rcu(net, qp->iif);
+		if (head->dev)
 			icmp_send(head, ICMP_TIME_EXCEEDED, ICMP_EXC_FRAGTIME, 0);
-			dev_put(head->dev);
-		}
+		rcu_read_unlock();
 	}
 out:
 	spin_unlock(&qp->q.lock);
@@ -563,7 +564,7 @@
 		printk(KERN_INFO "Oversized IP packet from %pI4.\n",
 			&qp->saddr);
 out_fail:
-	IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_REASMFAILS);
+	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMFAILS);
 	return err;
 }
 
@@ -603,7 +604,6 @@
 
 static struct ctl_table ip4_frags_ns_ctl_table[] = {
 	{
-		.ctl_name	= NET_IPV4_IPFRAG_HIGH_THRESH,
 		.procname	= "ipfrag_high_thresh",
 		.data		= &init_net.ipv4.frags.high_thresh,
 		.maxlen		= sizeof(int),
@@ -611,7 +611,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_IPFRAG_LOW_THRESH,
 		.procname	= "ipfrag_low_thresh",
 		.data		= &init_net.ipv4.frags.low_thresh,
 		.maxlen		= sizeof(int),
@@ -619,26 +618,22 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_IPFRAG_TIME,
 		.procname	= "ipfrag_time",
 		.data		= &init_net.ipv4.frags.timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{ }
 };
 
 static struct ctl_table ip4_frags_ctl_table[] = {
 	{
-		.ctl_name	= NET_IPV4_IPFRAG_SECRET_INTERVAL,
 		.procname	= "ipfrag_secret_interval",
 		.data		= &ip4_frags.secret_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
 		.procname	= "ipfrag_max_dist",
@@ -657,7 +652,7 @@
 	struct ctl_table_header *hdr;
 
 	table = ip4_frags_ns_ctl_table;
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		table = kmemdup(table, sizeof(ip4_frags_ns_ctl_table), GFP_KERNEL);
 		if (table == NULL)
 			goto err_alloc;
@@ -675,7 +670,7 @@
 	return 0;
 
 err_reg:
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		kfree(table);
 err_alloc:
 	return -ENOMEM;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 1433338..f36ce15 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -125,7 +125,7 @@
 
 #define HASH_SIZE  16
 
-static int ipgre_net_id;
+static int ipgre_net_id __read_mostly;
 struct ipgre_net {
 	struct ip_tunnel *tunnels[4][HASH_SIZE];
 
@@ -156,8 +156,13 @@
 #define tunnels_r	tunnels[2]
 #define tunnels_l	tunnels[1]
 #define tunnels_wc	tunnels[0]
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ipgre_lock);
 
-static DEFINE_RWLOCK(ipgre_lock);
+#define for_each_ip_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
 
 /* Given src, dst and key, find appropriate for input tunnel. */
 
@@ -175,7 +180,7 @@
 		       ARPHRD_ETHER : ARPHRD_IPGRE;
 	int score, cand_score = 4;
 
-	for (t = ign->tunnels_r_l[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_r_l[h0 ^ h1]) {
 		if (local != t->parms.iph.saddr ||
 		    remote != t->parms.iph.daddr ||
 		    key != t->parms.i_key ||
@@ -200,7 +205,7 @@
 		}
 	}
 
-	for (t = ign->tunnels_r[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_r[h0 ^ h1]) {
 		if (remote != t->parms.iph.daddr ||
 		    key != t->parms.i_key ||
 		    !(t->dev->flags & IFF_UP))
@@ -224,7 +229,7 @@
 		}
 	}
 
-	for (t = ign->tunnels_l[h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_l[h1]) {
 		if ((local != t->parms.iph.saddr &&
 		     (local != t->parms.iph.daddr ||
 		      !ipv4_is_multicast(local))) ||
@@ -250,7 +255,7 @@
 		}
 	}
 
-	for (t = ign->tunnels_wc[h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_wc[h1]) {
 		if (t->parms.i_key != key ||
 		    !(t->dev->flags & IFF_UP))
 			continue;
@@ -276,8 +281,9 @@
 	if (cand != NULL)
 		return cand;
 
-	if (ign->fb_tunnel_dev->flags & IFF_UP)
-		return netdev_priv(ign->fb_tunnel_dev);
+	dev = ign->fb_tunnel_dev;
+	if (dev->flags & IFF_UP)
+		return netdev_priv(dev);
 
 	return NULL;
 }
@@ -311,10 +317,10 @@
 {
 	struct ip_tunnel **tp = ipgre_bucket(ign, t);
 
+	spin_lock_bh(&ipgre_lock);
 	t->next = *tp;
-	write_lock_bh(&ipgre_lock);
-	*tp = t;
-	write_unlock_bh(&ipgre_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ipgre_lock);
 }
 
 static void ipgre_tunnel_unlink(struct ipgre_net *ign, struct ip_tunnel *t)
@@ -323,9 +329,9 @@
 
 	for (tp = ipgre_bucket(ign, t); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ipgre_lock);
+			spin_lock_bh(&ipgre_lock);
 			*tp = t->next;
-			write_unlock_bh(&ipgre_lock);
+			spin_unlock_bh(&ipgre_lock);
 			break;
 		}
 	}
@@ -476,7 +482,7 @@
 		break;
 	}
 
-	read_lock(&ipgre_lock);
+	rcu_read_lock();
 	t = ipgre_tunnel_lookup(skb->dev, iph->daddr, iph->saddr,
 				flags & GRE_KEY ?
 				*(((__be32 *)p) + (grehlen / 4) - 1) : 0,
@@ -494,7 +500,7 @@
 		t->err_count = 1;
 	t->err_time = jiffies;
 out:
-	read_unlock(&ipgre_lock);
+	rcu_read_unlock();
 	return;
 }
 
@@ -573,7 +579,7 @@
 
 	gre_proto = *(__be16 *)(h + 2);
 
-	read_lock(&ipgre_lock);
+	rcu_read_lock();
 	if ((tunnel = ipgre_tunnel_lookup(skb->dev,
 					  iph->saddr, iph->daddr, key,
 					  gre_proto))) {
@@ -647,13 +653,13 @@
 		ipgre_ecn_decapsulate(iph, skb);
 
 		netif_rx(skb);
-		read_unlock(&ipgre_lock);
+		rcu_read_unlock();
 		return(0);
 	}
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
 
 drop:
-	read_unlock(&ipgre_lock);
+	rcu_read_unlock();
 drop_nolock:
 	kfree_skb(skb);
 	return(0);
@@ -662,7 +668,8 @@
 static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-	struct net_device_stats *stats = &tunnel->dev->stats;
+	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct iphdr  *old_iph = ip_hdr(skb);
 	struct iphdr  *tiph;
 	u8     tos;
@@ -810,7 +817,7 @@
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			dev_kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -1283,33 +1290,27 @@
 	.netns_ok	=	1,
 };
 
-static void ipgre_destroy_tunnels(struct ipgre_net *ign)
+static void ipgre_destroy_tunnels(struct ipgre_net *ign, struct list_head *head)
 {
 	int prio;
 
 	for (prio = 0; prio < 4; prio++) {
 		int h;
 		for (h = 0; h < HASH_SIZE; h++) {
-			struct ip_tunnel *t;
-			while ((t = ign->tunnels[prio][h]) != NULL)
-				unregister_netdevice(t->dev);
+			struct ip_tunnel *t = ign->tunnels[prio][h];
+
+			while (t != NULL) {
+				unregister_netdevice_queue(t->dev, head);
+				t = t->next;
+			}
 		}
 	}
 }
 
 static int ipgre_init_net(struct net *net)
 {
+	struct ipgre_net *ign = net_generic(net, ipgre_net_id);
 	int err;
-	struct ipgre_net *ign;
-
-	err = -ENOMEM;
-	ign = kzalloc(sizeof(struct ipgre_net), GFP_KERNEL);
-	if (ign == NULL)
-		goto err_alloc;
-
-	err = net_assign_generic(net, ipgre_net_id, ign);
-	if (err < 0)
-		goto err_assign;
 
 	ign->fb_tunnel_dev = alloc_netdev(sizeof(struct ip_tunnel), "gre0",
 					   ipgre_tunnel_setup);
@@ -1330,27 +1331,26 @@
 err_reg_dev:
 	free_netdev(ign->fb_tunnel_dev);
 err_alloc_dev:
-	/* nothing */
-err_assign:
-	kfree(ign);
-err_alloc:
 	return err;
 }
 
 static void ipgre_exit_net(struct net *net)
 {
 	struct ipgre_net *ign;
+	LIST_HEAD(list);
 
 	ign = net_generic(net, ipgre_net_id);
 	rtnl_lock();
-	ipgre_destroy_tunnels(ign);
+	ipgre_destroy_tunnels(ign, &list);
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
-	kfree(ign);
 }
 
 static struct pernet_operations ipgre_net_ops = {
 	.init = ipgre_init_net,
 	.exit = ipgre_exit_net,
+	.id   = &ipgre_net_id,
+	.size = sizeof(struct ipgre_net),
 };
 
 static int ipgre_tunnel_validate(struct nlattr *tb[], struct nlattr *data[])
@@ -1471,7 +1471,7 @@
 	dev->features		|= NETIF_F_NETNS_LOCAL;
 }
 
-static int ipgre_newlink(struct net_device *dev, struct nlattr *tb[],
+static int ipgre_newlink(struct net *src_net, struct net_device *dev, struct nlattr *tb[],
 			 struct nlattr *data[])
 {
 	struct ip_tunnel *nt;
@@ -1670,7 +1670,7 @@
 		return -EAGAIN;
 	}
 
-	err = register_pernet_gen_device(&ipgre_net_id, &ipgre_net_ops);
+	err = register_pernet_device(&ipgre_net_ops);
 	if (err < 0)
 		goto gen_device_failed;
 
@@ -1688,7 +1688,7 @@
 tap_ops_failed:
 	rtnl_link_unregister(&ipgre_link_ops);
 rtnl_link_failed:
-	unregister_pernet_gen_device(ipgre_net_id, &ipgre_net_ops);
+	unregister_pernet_device(&ipgre_net_ops);
 gen_device_failed:
 	inet_del_protocol(&ipgre_protocol, IPPROTO_GRE);
 	goto out;
@@ -1698,7 +1698,7 @@
 {
 	rtnl_link_unregister(&ipgre_tap_ops);
 	rtnl_link_unregister(&ipgre_link_ops);
-	unregister_pernet_gen_device(ipgre_net_id, &ipgre_net_ops);
+	unregister_pernet_device(&ipgre_net_ops);
 	if (inet_del_protocol(&ipgre_protocol, IPPROTO_GRE) < 0)
 		printk(KERN_INFO "ipgre close: can't remove protocol\n");
 }
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 6c98b43..c29de98 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -161,10 +161,10 @@
 		/* If socket is bound to an interface, only report
 		 * the packet if it came  from that interface.
 		 */
-		if (sk && inet_sk(sk)->num == protocol &&
+		if (sk && inet_sk(sk)->inet_num == protocol &&
 		    (!sk->sk_bound_dev_if ||
 		     sk->sk_bound_dev_if == dev->ifindex) &&
-		    sock_net(sk) == dev_net(dev)) {
+		    net_eq(sock_net(sk), dev_net(dev))) {
 			if (ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) {
 				if (ip_defrag(skb, IP_DEFRAG_CALL_RA_CHAIN)) {
 					read_unlock(&ip_ra_lock);
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index f989518..e34013a 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -264,9 +264,11 @@
 
 		   This check is duplicated in ip_mr_input at the moment.
 		 */
-		    && ((rt->rt_flags&RTCF_LOCAL) || !(IPCB(skb)->flags&IPSKB_FORWARDED))
+		    &&
+		    ((rt->rt_flags & RTCF_LOCAL) ||
+		     !(IPCB(skb)->flags & IPSKB_FORWARDED))
 #endif
-		) {
+		   ) {
 			struct sk_buff *newskb = skb_clone(skb, GFP_ATOMIC);
 			if (newskb)
 				NF_HOOK(PF_INET, NF_INET_POST_ROUTING, newskb,
@@ -329,7 +331,7 @@
 		__be32 daddr;
 
 		/* Use correct destination address if we have options. */
-		daddr = inet->daddr;
+		daddr = inet->inet_daddr;
 		if(opt && opt->srr)
 			daddr = opt->faddr;
 
@@ -338,13 +340,13 @@
 					    .mark = sk->sk_mark,
 					    .nl_u = { .ip4_u =
 						      { .daddr = daddr,
-							.saddr = inet->saddr,
+							.saddr = inet->inet_saddr,
 							.tos = RT_CONN_FLAGS(sk) } },
 					    .proto = sk->sk_protocol,
 					    .flags = inet_sk_flowi_flags(sk),
 					    .uli_u = { .ports =
-						       { .sport = inet->sport,
-							 .dport = inet->dport } } };
+						       { .sport = inet->inet_sport,
+							 .dport = inet->inet_dport } } };
 
 			/* If this fails, retransmit mechanism of transport layer will
 			 * keep trying until route appears or the connection times
@@ -379,7 +381,7 @@
 
 	if (opt && opt->optlen) {
 		iph->ihl += opt->optlen >> 2;
-		ip_options_build(skb, opt, inet->daddr, rt, 0);
+		ip_options_build(skb, opt, inet->inet_daddr, rt, 0);
 	}
 
 	ip_select_ident_more(iph, &rt->u.dst, sk,
@@ -501,8 +503,8 @@
 			if (skb->sk) {
 				frag->sk = skb->sk;
 				frag->destructor = sock_wfree;
-				truesizes += frag->truesize;
 			}
+			truesizes += frag->truesize;
 		}
 
 		/* Everything is OK. Generate! */
@@ -846,7 +848,8 @@
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
 
 	if (inet->cork.length + length > 0xFFFF - fragheaderlen) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->dport, mtu-exthdrlen);
+		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
+			       mtu-exthdrlen);
 		return -EMSGSIZE;
 	}
 
@@ -1100,7 +1103,7 @@
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
 
 	if (inet->cork.length + size > 0xFFFF - fragheaderlen) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->dport, mtu);
+		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport, mtu);
 		return -EMSGSIZE;
 	}
 
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index e982b5c..cafad9b 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -245,7 +245,7 @@
 {
 	struct ip_ra_chain *ra, *new_ra, **rap;
 
-	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num == IPPROTO_RAW)
+	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->inet_num == IPPROTO_RAW)
 		return -EINVAL;
 
 	new_ra = on ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
@@ -480,7 +480,7 @@
 	case IP_OPTIONS:
 	{
 		struct ip_options *opt = NULL;
-		if (optlen > 40 || optlen < 0)
+		if (optlen > 40)
 			goto e_inval;
 		err = ip_options_get_from_user(sock_net(sk), &opt,
 					       optval, optlen);
@@ -492,7 +492,7 @@
 			if (sk->sk_family == PF_INET ||
 			    (!((1 << sk->sk_state) &
 			       (TCPF_LISTEN | TCPF_CLOSE)) &&
-			     inet->daddr != LOOPBACK4_IPV6)) {
+			     inet->inet_daddr != LOOPBACK4_IPV6)) {
 #endif
 				if (inet->opt)
 					icsk->icsk_ext_hdr_len -= inet->opt->optlen;
@@ -575,7 +575,7 @@
 		inet->hdrincl = val ? 1 : 0;
 		break;
 	case IP_MTU_DISCOVER:
-		if (val < 0 || val > 3)
+		if (val < IP_PMTUDISC_DONT || val > IP_PMTUDISC_PROBE)
 			goto e_inval;
 		inet->pmtudisc = val;
 		break;
@@ -1180,8 +1180,8 @@
 		if (inet->cmsg_flags & IP_CMSG_PKTINFO) {
 			struct in_pktinfo info;
 
-			info.ipi_addr.s_addr = inet->rcv_saddr;
-			info.ipi_spec_dst.s_addr = inet->rcv_saddr;
+			info.ipi_addr.s_addr = inet->inet_rcv_saddr;
+			info.ipi_spec_dst.s_addr = inet->inet_rcv_saddr;
 			info.ipi_ifindex = inet->mc_index;
 			put_cmsg(&msg, SOL_IP, IP_PKTINFO, sizeof(info), &info);
 		}
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index f8d04c2..4e08b7f 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1172,10 +1172,9 @@
 			schedule_timeout_uninterruptible(1);
 #ifdef IPCONFIG_DHCP
 		/* DHCP isn't done until we get a DHCPACK. */
-		if ((ic_got_reply & IC_BOOTP)
-		    && (ic_proto_enabled & IC_USE_DHCP)
-		    && ic_dhcp_msgtype != DHCPACK)
-		{
+		if ((ic_got_reply & IC_BOOTP) &&
+		    (ic_proto_enabled & IC_USE_DHCP) &&
+		    ic_dhcp_msgtype != DHCPACK) {
 			ic_got_reply = 0;
 			printk(",");
 			continue;
@@ -1344,9 +1343,9 @@
 	 */
 	if (ic_myaddr == NONE ||
 #ifdef CONFIG_ROOT_NFS
-	    (root_server_addr == NONE
-	     && ic_servaddr == NONE
-	     && ROOT_DEV == Root_NFS) ||
+	    (root_server_addr == NONE &&
+	     ic_servaddr == NONE &&
+	     ROOT_DEV == Root_NFS) ||
 #endif
 	    ic_first_dev->next) {
 #ifdef IPCONFIG_DYNAMIC
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index ae40ed1..eda04fe 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -119,7 +119,7 @@
 #define HASH_SIZE  16
 #define HASH(addr) (((__force u32)addr^((__force u32)addr>>4))&0xF)
 
-static int ipip_net_id;
+static int ipip_net_id __read_mostly;
 struct ipip_net {
 	struct ip_tunnel *tunnels_r_l[HASH_SIZE];
 	struct ip_tunnel *tunnels_r[HASH_SIZE];
@@ -134,7 +134,13 @@
 static void ipip_tunnel_init(struct net_device *dev);
 static void ipip_tunnel_setup(struct net_device *dev);
 
-static DEFINE_RWLOCK(ipip_lock);
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ipip_lock);
+
+#define for_each_ip_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
 
 static struct ip_tunnel * ipip_tunnel_lookup(struct net *net,
 		__be32 remote, __be32 local)
@@ -144,20 +150,21 @@
 	struct ip_tunnel *t;
 	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 
-	for (t = ipn->tunnels_r_l[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ipn->tunnels_r_l[h0 ^ h1])
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
 			return t;
-	}
-	for (t = ipn->tunnels_r[h0]; t; t = t->next) {
+
+	for_each_ip_tunnel_rcu(ipn->tunnels_r[h0])
 		if (remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
 			return t;
-	}
-	for (t = ipn->tunnels_l[h1]; t; t = t->next) {
+
+	for_each_ip_tunnel_rcu(ipn->tunnels_l[h1])
 		if (local == t->parms.iph.saddr && (t->dev->flags&IFF_UP))
 			return t;
-	}
-	if ((t = ipn->tunnels_wc[0]) != NULL && (t->dev->flags&IFF_UP))
+
+	t = rcu_dereference(ipn->tunnels_wc[0]);
+	if (t && (t->dev->flags&IFF_UP))
 		return t;
 	return NULL;
 }
@@ -193,9 +200,9 @@
 
 	for (tp = ipip_bucket(ipn, t); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ipip_lock);
+			spin_lock_bh(&ipip_lock);
 			*tp = t->next;
-			write_unlock_bh(&ipip_lock);
+			spin_unlock_bh(&ipip_lock);
 			break;
 		}
 	}
@@ -205,10 +212,10 @@
 {
 	struct ip_tunnel **tp = ipip_bucket(ipn, t);
 
+	spin_lock_bh(&ipip_lock);
 	t->next = *tp;
-	write_lock_bh(&ipip_lock);
-	*tp = t;
-	write_unlock_bh(&ipip_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ipip_lock);
 }
 
 static struct ip_tunnel * ipip_tunnel_locate(struct net *net,
@@ -267,9 +274,9 @@
 	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 
 	if (dev == ipn->fb_tunnel_dev) {
-		write_lock_bh(&ipip_lock);
+		spin_lock_bh(&ipip_lock);
 		ipn->tunnels_wc[0] = NULL;
-		write_unlock_bh(&ipip_lock);
+		spin_unlock_bh(&ipip_lock);
 	} else
 		ipip_tunnel_unlink(ipn, netdev_priv(dev));
 	dev_put(dev);
@@ -318,7 +325,7 @@
 
 	err = -ENOENT;
 
-	read_lock(&ipip_lock);
+	rcu_read_lock();
 	t = ipip_tunnel_lookup(dev_net(skb->dev), iph->daddr, iph->saddr);
 	if (t == NULL || t->parms.iph.daddr == 0)
 		goto out;
@@ -333,7 +340,7 @@
 		t->err_count = 1;
 	t->err_time = jiffies;
 out:
-	read_unlock(&ipip_lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -351,11 +358,11 @@
 	struct ip_tunnel *tunnel;
 	const struct iphdr *iph = ip_hdr(skb);
 
-	read_lock(&ipip_lock);
+	rcu_read_lock();
 	if ((tunnel = ipip_tunnel_lookup(dev_net(skb->dev),
 					iph->saddr, iph->daddr)) != NULL) {
 		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
-			read_unlock(&ipip_lock);
+			rcu_read_unlock();
 			kfree_skb(skb);
 			return 0;
 		}
@@ -374,10 +381,10 @@
 		nf_reset(skb);
 		ipip_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
-		read_unlock(&ipip_lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	read_unlock(&ipip_lock);
+	rcu_read_unlock();
 
 	return -1;
 }
@@ -390,7 +397,8 @@
 static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-	struct net_device_stats *stats = &tunnel->dev->stats;
+	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct iphdr  *tiph = &tunnel->parms.iph;
 	u8     tos = tunnel->parms.iph.tos;
 	__be16 df = tiph->frag_off;
@@ -480,7 +488,7 @@
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			dev_kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -748,33 +756,27 @@
 static const char banner[] __initconst =
 	KERN_INFO "IPv4 over IPv4 tunneling driver\n";
 
-static void ipip_destroy_tunnels(struct ipip_net *ipn)
+static void ipip_destroy_tunnels(struct ipip_net *ipn, struct list_head *head)
 {
 	int prio;
 
 	for (prio = 1; prio < 4; prio++) {
 		int h;
 		for (h = 0; h < HASH_SIZE; h++) {
-			struct ip_tunnel *t;
-			while ((t = ipn->tunnels[prio][h]) != NULL)
-				unregister_netdevice(t->dev);
+			struct ip_tunnel *t = ipn->tunnels[prio][h];
+
+			while (t != NULL) {
+				unregister_netdevice_queue(t->dev, head);
+				t = t->next;
+			}
 		}
 	}
 }
 
 static int ipip_init_net(struct net *net)
 {
+	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 	int err;
-	struct ipip_net *ipn;
-
-	err = -ENOMEM;
-	ipn = kzalloc(sizeof(struct ipip_net), GFP_KERNEL);
-	if (ipn == NULL)
-		goto err_alloc;
-
-	err = net_assign_generic(net, ipip_net_id, ipn);
-	if (err < 0)
-		goto err_assign;
 
 	ipn->tunnels[0] = ipn->tunnels_wc;
 	ipn->tunnels[1] = ipn->tunnels_l;
@@ -801,27 +803,26 @@
 	free_netdev(ipn->fb_tunnel_dev);
 err_alloc_dev:
 	/* nothing */
-err_assign:
-	kfree(ipn);
-err_alloc:
 	return err;
 }
 
 static void ipip_exit_net(struct net *net)
 {
-	struct ipip_net *ipn;
+	struct ipip_net *ipn = net_generic(net, ipip_net_id);
+	LIST_HEAD(list);
 
-	ipn = net_generic(net, ipip_net_id);
 	rtnl_lock();
-	ipip_destroy_tunnels(ipn);
-	unregister_netdevice(ipn->fb_tunnel_dev);
+	ipip_destroy_tunnels(ipn, &list);
+	unregister_netdevice_queue(ipn->fb_tunnel_dev, &list);
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
-	kfree(ipn);
 }
 
 static struct pernet_operations ipip_net_ops = {
 	.init = ipip_init_net,
 	.exit = ipip_exit_net,
+	.id   = &ipip_net_id,
+	.size = sizeof(struct ipip_net),
 };
 
 static int __init ipip_init(void)
@@ -835,7 +836,7 @@
 		return -EAGAIN;
 	}
 
-	err = register_pernet_gen_device(&ipip_net_id, &ipip_net_ops);
+	err = register_pernet_device(&ipip_net_ops);
 	if (err)
 		xfrm4_tunnel_deregister(&ipip_handler, AF_INET);
 
@@ -847,7 +848,7 @@
 	if (xfrm4_tunnel_deregister(&ipip_handler, AF_INET))
 		printk(KERN_INFO "ipip close: can't deregister tunnel\n");
 
-	unregister_pernet_gen_device(ipip_net_id, &ipip_net_ops);
+	unregister_pernet_device(&ipip_net_ops);
 }
 
 module_init(ipip_init);
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 99508d6..54596f7 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -275,7 +275,8 @@
  *	@notify: Set to 1, if the caller is a notifier_call
  */
 
-static int vif_delete(struct net *net, int vifi, int notify)
+static int vif_delete(struct net *net, int vifi, int notify,
+		      struct list_head *head)
 {
 	struct vif_device *v;
 	struct net_device *dev;
@@ -319,7 +320,7 @@
 	}
 
 	if (v->flags&(VIFF_TUNNEL|VIFF_REGISTER) && !notify)
-		unregister_netdevice(dev);
+		unregister_netdevice_queue(dev, head);
 
 	dev_put(dev);
 	return 0;
@@ -469,8 +470,18 @@
 			return err;
 		}
 		break;
+
+	case VIFF_USE_IFINDEX:
 	case 0:
-		dev = ip_dev_find(net, vifc->vifc_lcl_addr.s_addr);
+		if (vifc->vifc_flags == VIFF_USE_IFINDEX) {
+			dev = dev_get_by_index(net, vifc->vifc_lcl_ifindex);
+			if (dev && dev->ip_ptr == NULL) {
+				dev_put(dev);
+				return -EADDRNOTAVAIL;
+			}
+		} else
+			dev = ip_dev_find(net, vifc->vifc_lcl_addr.s_addr);
+
 		if (!dev)
 			return -EADDRNOTAVAIL;
 		err = dev_set_allmulti(dev, 1);
@@ -862,14 +873,16 @@
 static void mroute_clean_tables(struct net *net)
 {
 	int i;
+	LIST_HEAD(list);
 
 	/*
 	 *	Shut down all active vif entries
 	 */
 	for (i = 0; i < net->ipv4.maxvif; i++) {
 		if (!(net->ipv4.vif_table[i].flags&VIFF_STATIC))
-			vif_delete(net, i, 0);
+			vif_delete(net, i, 0, &list);
 	}
+	unregister_netdevice_many(&list);
 
 	/*
 	 *	Wipe the cache
@@ -948,7 +961,7 @@
 	switch (optname) {
 	case MRT_INIT:
 		if (sk->sk_type != SOCK_RAW ||
-		    inet_sk(sk)->num != IPPROTO_IGMP)
+		    inet_sk(sk)->inet_num != IPPROTO_IGMP)
 			return -EOPNOTSUPP;
 		if (optlen != sizeof(int))
 			return -ENOPROTOOPT;
@@ -985,7 +998,7 @@
 		if (optname == MRT_ADD_VIF) {
 			ret = vif_add(net, &vif, sk == net->ipv4.mroute_sk);
 		} else {
-			ret = vif_delete(net, vif.vifc_vifi, 0);
+			ret = vif_delete(net, vif.vifc_vifi, 0, NULL);
 		}
 		rtnl_unlock();
 		return ret;
@@ -1148,6 +1161,7 @@
 	struct net *net = dev_net(dev);
 	struct vif_device *v;
 	int ct;
+	LIST_HEAD(list);
 
 	if (!net_eq(dev_net(dev), net))
 		return NOTIFY_DONE;
@@ -1157,8 +1171,9 @@
 	v = &net->ipv4.vif_table[0];
 	for (ct = 0; ct < net->ipv4.maxvif; ct++, v++) {
 		if (v->dev == dev)
-			vif_delete(net, ct, 1);
+			vif_delete(net, ct, 1, &list);
 	}
+	unregister_netdevice_many(&list);
 	return NOTIFY_DONE;
 }
 
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index 1725dc0..c14623f 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -155,10 +155,10 @@
 	if (entry->hook == NF_INET_LOCAL_OUT) {
 		const struct iphdr *iph = ip_hdr(skb);
 
-		if (!(iph->tos == rt_info->tos
-		      && skb->mark == rt_info->mark
-		      && iph->daddr == rt_info->daddr
-		      && iph->saddr == rt_info->saddr))
+		if (!(iph->tos == rt_info->tos &&
+		      skb->mark == rt_info->mark &&
+		      iph->daddr == rt_info->daddr &&
+		      iph->saddr == rt_info->saddr))
 			return ip_route_me_harder(skb, RTN_UNSPEC);
 	}
 	return 0;
@@ -248,9 +248,9 @@
 
 #ifdef CONFIG_SYSCTL
 struct ctl_path nf_net_ipv4_netfilter_sysctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
-	{ .procname = "netfilter", .ctl_name = NET_IPV4_NETFILTER, },
+	{ .procname = "net", },
+	{ .procname = "ipv4", },
+	{ .procname = "netfilter", },
 	{ }
 };
 EXPORT_SYMBOL_GPL(nf_net_ipv4_netfilter_sysctl_path);
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 27774c9..0663276 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -384,11 +384,11 @@
 				|= ((1 << hook) | (1 << NF_ARP_NUMHOOKS));
 
 			/* Unconditional return/END. */
-			if ((e->target_offset == sizeof(struct arpt_entry)
-			    && (strcmp(t->target.u.user.name,
-				       ARPT_STANDARD_TARGET) == 0)
-			    && t->verdict < 0
-			    && unconditional(&e->arp)) || visited) {
+			if ((e->target_offset == sizeof(struct arpt_entry) &&
+			     (strcmp(t->target.u.user.name,
+				     ARPT_STANDARD_TARGET) == 0) &&
+			     t->verdict < 0 && unconditional(&e->arp)) ||
+			    visited) {
 				unsigned int oldpos, size;
 
 				if ((strcmp(t->target.u.user.name,
@@ -427,8 +427,8 @@
 				int newpos = t->verdict;
 
 				if (strcmp(t->target.u.user.name,
-					   ARPT_STANDARD_TARGET) == 0
-				    && newpos >= 0) {
+					   ARPT_STANDARD_TARGET) == 0 &&
+				    newpos >= 0) {
 					if (newpos > newinfo->size -
 						sizeof(struct arpt_entry)) {
 						duprintf("mark_source_chains: "
@@ -559,8 +559,8 @@
 {
 	unsigned int h;
 
-	if ((unsigned long)e % __alignof__(struct arpt_entry) != 0
-	    || (unsigned char *)e + sizeof(struct arpt_entry) >= limit) {
+	if ((unsigned long)e % __alignof__(struct arpt_entry) != 0 ||
+	    (unsigned char *)e + sizeof(struct arpt_entry) >= limit) {
 		duprintf("Bad offset %p\n", e);
 		return -EINVAL;
 	}
@@ -1251,8 +1251,8 @@
 	int ret, off, h;
 
 	duprintf("check_compat_entry_size_and_hooks %p\n", e);
-	if ((unsigned long)e % __alignof__(struct compat_arpt_entry) != 0
-	    || (unsigned char *)e + sizeof(struct compat_arpt_entry) >= limit) {
+	if ((unsigned long)e % __alignof__(struct compat_arpt_entry) != 0 ||
+	    (unsigned char *)e + sizeof(struct compat_arpt_entry) >= limit) {
 		duprintf("Bad offset %p, limit = %p\n", e, limit);
 		return -EINVAL;
 	}
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index c156db2..2855f1f 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -497,10 +497,9 @@
 {
 	struct netlink_notify *n = ptr;
 
-	if (event == NETLINK_URELEASE &&
-	    n->protocol == NETLINK_FIREWALL && n->pid) {
+	if (event == NETLINK_URELEASE && n->protocol == NETLINK_FIREWALL) {
 		write_lock_bh(&queue_lock);
-		if ((n->net == &init_net) && (n->pid == peer_pid))
+		if ((net_eq(n->net, &init_net)) && (n->pid == peer_pid))
 			__ipq_reset();
 		write_unlock_bh(&queue_lock);
 	}
@@ -516,14 +515,13 @@
 
 static ctl_table ipq_table[] = {
 	{
-		.ctl_name	= NET_IPQ_QMAX,
 		.procname	= NET_IPQ_QMAX_NAME,
 		.data		= &queue_maxlen,
 		.maxlen		= sizeof(queue_maxlen),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
@@ -622,7 +620,7 @@
 static void __exit ip_queue_fini(void)
 {
 	nf_unregister_queue_handlers(&nfqh);
-	synchronize_net();
+
 	ipq_flush(NULL, 0);
 
 #ifdef CONFIG_SYSCTL
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index cde755d..572330a 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -89,9 +89,9 @@
 #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
 
 	if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
-		  IPT_INV_SRCIP)
-	    || FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
-		     IPT_INV_DSTIP)) {
+		  IPT_INV_SRCIP) ||
+	    FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
+		  IPT_INV_DSTIP)) {
 		dprintf("Source or dest mismatch.\n");
 
 		dprintf("SRC: %pI4. Mask: %pI4. Target: %pI4.%s\n",
@@ -122,8 +122,8 @@
 	}
 
 	/* Check specific protocol */
-	if (ipinfo->proto
-	    && FWINV(ip->protocol != ipinfo->proto, IPT_INV_PROTO)) {
+	if (ipinfo->proto &&
+	    FWINV(ip->protocol != ipinfo->proto, IPT_INV_PROTO)) {
 		dprintf("Packet protocol %hi does not match %hi.%s\n",
 			ip->protocol, ipinfo->proto,
 			ipinfo->invflags&IPT_INV_PROTO ? " (INV)":"");
@@ -246,11 +246,11 @@
 	} else if (s == e) {
 		(*rulenum)++;
 
-		if (s->target_offset == sizeof(struct ipt_entry)
-		   && strcmp(t->target.u.kernel.target->name,
-			     IPT_STANDARD_TARGET) == 0
-		   && t->verdict < 0
-		   && unconditional(&s->ip)) {
+		if (s->target_offset == sizeof(struct ipt_entry) &&
+		    strcmp(t->target.u.kernel.target->name,
+			   IPT_STANDARD_TARGET) == 0 &&
+		   t->verdict < 0 &&
+		   unconditional(&s->ip)) {
 			/* Tail of chains: STANDARD target (return/policy) */
 			*comment = *chainname == hookname
 				? comments[NF_IP_TRACE_COMMENT_POLICY]
@@ -388,8 +388,8 @@
 				back = get_entry(table_base, back->comefrom);
 				continue;
 			}
-			if (table_base + v != ipt_next_entry(e)
-			    && !(e->ip.flags & IPT_F_GOTO)) {
+			if (table_base + v != ipt_next_entry(e) &&
+			    !(e->ip.flags & IPT_F_GOTO)) {
 				/* Save old back ptr in next entry */
 				struct ipt_entry *next = ipt_next_entry(e);
 				next->comefrom = (void *)back - table_base;
@@ -473,11 +473,11 @@
 			e->comefrom |= ((1 << hook) | (1 << NF_INET_NUMHOOKS));
 
 			/* Unconditional return/END. */
-			if ((e->target_offset == sizeof(struct ipt_entry)
-			    && (strcmp(t->target.u.user.name,
-				       IPT_STANDARD_TARGET) == 0)
-			    && t->verdict < 0
-			    && unconditional(&e->ip)) || visited) {
+			if ((e->target_offset == sizeof(struct ipt_entry) &&
+			     (strcmp(t->target.u.user.name,
+				     IPT_STANDARD_TARGET) == 0) &&
+			     t->verdict < 0 && unconditional(&e->ip)) ||
+			    visited) {
 				unsigned int oldpos, size;
 
 				if ((strcmp(t->target.u.user.name,
@@ -524,8 +524,8 @@
 				int newpos = t->verdict;
 
 				if (strcmp(t->target.u.user.name,
-					   IPT_STANDARD_TARGET) == 0
-				    && newpos >= 0) {
+					   IPT_STANDARD_TARGET) == 0 &&
+				    newpos >= 0) {
 					if (newpos > newinfo->size -
 						sizeof(struct ipt_entry)) {
 						duprintf("mark_source_chains: "
@@ -735,8 +735,8 @@
 {
 	unsigned int h;
 
-	if ((unsigned long)e % __alignof__(struct ipt_entry) != 0
-	    || (unsigned char *)e + sizeof(struct ipt_entry) >= limit) {
+	if ((unsigned long)e % __alignof__(struct ipt_entry) != 0 ||
+	    (unsigned char *)e + sizeof(struct ipt_entry) >= limit) {
 		duprintf("Bad offset %p\n", e);
 		return -EINVAL;
 	}
@@ -1548,8 +1548,8 @@
 	int ret, off, h;
 
 	duprintf("check_compat_entry_size_and_hooks %p\n", e);
-	if ((unsigned long)e % __alignof__(struct compat_ipt_entry) != 0
-	    || (unsigned char *)e + sizeof(struct compat_ipt_entry) >= limit) {
+	if ((unsigned long)e % __alignof__(struct compat_ipt_entry) != 0 ||
+	    (unsigned char *)e + sizeof(struct compat_ipt_entry) >= limit) {
 		duprintf("Bad offset %p, limit = %p\n", e, limit);
 		return -EINVAL;
 	}
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index 2e4f98b..40ca2d2 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -303,9 +303,9 @@
 
 	/* special case: ICMP error handling. conntrack distinguishes between
 	 * error messages (RELATED) and information requests (see below) */
-	if (ip_hdr(skb)->protocol == IPPROTO_ICMP
-	    && (ctinfo == IP_CT_RELATED
-		|| ctinfo == IP_CT_RELATED+IP_CT_IS_REPLY))
+	if (ip_hdr(skb)->protocol == IPPROTO_ICMP &&
+	    (ctinfo == IP_CT_RELATED ||
+	     ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY))
 		return XT_CONTINUE;
 
 	/* ip_conntrack_icmp guarantees us that we only have ICMP_ECHO,
@@ -362,8 +362,8 @@
 		return false;
 
 	}
-	if (e->ip.dmsk.s_addr != htonl(0xffffffff)
-	    || e->ip.dst.s_addr == 0) {
+	if (e->ip.dmsk.s_addr != htonl(0xffffffff) ||
+	    e->ip.dst.s_addr == 0) {
 		printk(KERN_ERR "CLUSTERIP: Please specify destination IP\n");
 		return false;
 	}
@@ -495,14 +495,14 @@
 	struct clusterip_config *c;
 
 	/* we don't care about non-ethernet and non-ipv4 ARP */
-	if (arp->ar_hrd != htons(ARPHRD_ETHER)
-	    || arp->ar_pro != htons(ETH_P_IP)
-	    || arp->ar_pln != 4 || arp->ar_hln != ETH_ALEN)
+	if (arp->ar_hrd != htons(ARPHRD_ETHER) ||
+	    arp->ar_pro != htons(ETH_P_IP) ||
+	    arp->ar_pln != 4 || arp->ar_hln != ETH_ALEN)
 		return NF_ACCEPT;
 
 	/* we only want to mangle arp requests and replies */
-	if (arp->ar_op != htons(ARPOP_REPLY)
-	    && arp->ar_op != htons(ARPOP_REQUEST))
+	if (arp->ar_op != htons(ARPOP_REPLY) &&
+	    arp->ar_op != htons(ARPOP_REQUEST))
 		return NF_ACCEPT;
 
 	payload = (void *)(arp+1);
diff --git a/net/ipv4/netfilter/ipt_ECN.c b/net/ipv4/netfilter/ipt_ECN.c
index f7e2fa0..549e206 100644
--- a/net/ipv4/netfilter/ipt_ECN.c
+++ b/net/ipv4/netfilter/ipt_ECN.c
@@ -85,8 +85,8 @@
 		if (!set_ect_ip(skb, einfo))
 			return NF_DROP;
 
-	if (einfo->operation & (IPT_ECN_OP_SET_ECE | IPT_ECN_OP_SET_CWR)
-	    && ip_hdr(skb)->protocol == IPPROTO_TCP)
+	if (einfo->operation & (IPT_ECN_OP_SET_ECE | IPT_ECN_OP_SET_CWR) &&
+	    ip_hdr(skb)->protocol == IPPROTO_TCP)
 		if (!set_ect_tcp(skb, einfo))
 			return NF_DROP;
 
@@ -108,8 +108,8 @@
 			einfo->ip_ect);
 		return false;
 	}
-	if ((einfo->operation & (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR))
-	    && (e->ip.proto != IPPROTO_TCP || (e->ip.invflags & XT_INV_PROTO))) {
+	if ((einfo->operation & (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR)) &&
+	    (e->ip.proto != IPPROTO_TCP || (e->ip.invflags & XT_INV_PROTO))) {
 		printk(KERN_WARNING "ECN: cannot use TCP operations on a "
 		       "non-tcp rule\n");
 		return false;
diff --git a/net/ipv4/netfilter/ipt_LOG.c b/net/ipv4/netfilter/ipt_LOG.c
index acc44c6..ee128ef 100644
--- a/net/ipv4/netfilter/ipt_LOG.c
+++ b/net/ipv4/netfilter/ipt_LOG.c
@@ -74,8 +74,8 @@
 	if (ntohs(ih->frag_off) & IP_OFFSET)
 		printk("FRAG:%u ", ntohs(ih->frag_off) & IP_OFFSET);
 
-	if ((logflags & IPT_LOG_IPOPT)
-	    && ih->ihl * 4 > sizeof(struct iphdr)) {
+	if ((logflags & IPT_LOG_IPOPT) &&
+	    ih->ihl * 4 > sizeof(struct iphdr)) {
 		const unsigned char *op;
 		unsigned char _opt[4 * 15 - sizeof(struct iphdr)];
 		unsigned int i, optsize;
@@ -146,8 +146,8 @@
 		/* Max length: 11 "URGP=65535 " */
 		printk("URGP=%u ", ntohs(th->urg_ptr));
 
-		if ((logflags & IPT_LOG_TCPOPT)
-		    && th->doff * 4 > sizeof(struct tcphdr)) {
+		if ((logflags & IPT_LOG_TCPOPT) &&
+		    th->doff * 4 > sizeof(struct tcphdr)) {
 			unsigned char _opt[4 * 15 - sizeof(struct tcphdr)];
 			const unsigned char *op;
 			unsigned int i, optsize;
@@ -238,9 +238,9 @@
 		printk("TYPE=%u CODE=%u ", ich->type, ich->code);
 
 		/* Max length: 25 "INCOMPLETE [65535 bytes] " */
-		if (ich->type <= NR_ICMP_TYPES
-		    && required_len[ich->type]
-		    && skb->len-iphoff-ih->ihl*4 < required_len[ich->type]) {
+		if (ich->type <= NR_ICMP_TYPES &&
+		    required_len[ich->type] &&
+		    skb->len-iphoff-ih->ihl*4 < required_len[ich->type]) {
 			printk("INCOMPLETE [%u bytes] ",
 			       skb->len - iphoff - ih->ihl*4);
 			break;
@@ -276,8 +276,8 @@
 			}
 
 			/* Max length: 10 "MTU=65535 " */
-			if (ich->type == ICMP_DEST_UNREACH
-			    && ich->code == ICMP_FRAG_NEEDED)
+			if (ich->type == ICMP_DEST_UNREACH &&
+			    ich->code == ICMP_FRAG_NEEDED)
 				printk("MTU=%u ", ntohs(ich->un.frag.mtu));
 		}
 		break;
@@ -407,8 +407,8 @@
 	if (in && !out) {
 		/* MAC logging for input chain only. */
 		printk("MAC=");
-		if (skb->dev && skb->dev->hard_header_len
-		    && skb->mac_header != skb->network_header) {
+		if (skb->dev && skb->dev->hard_header_len &&
+		    skb->mac_header != skb->network_header) {
 			int i;
 			const unsigned char *p = skb_mac_header(skb);
 			for (i = 0; i < skb->dev->hard_header_len; i++,p++)
diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c
index dada086..650b540 100644
--- a/net/ipv4/netfilter/ipt_MASQUERADE.c
+++ b/net/ipv4/netfilter/ipt_MASQUERADE.c
@@ -59,8 +59,8 @@
 	ct = nf_ct_get(skb, &ctinfo);
 	nat = nfct_nat(ct);
 
-	NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED
-			    || ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
+	NF_CT_ASSERT(ct && (ctinfo == IP_CT_NEW || ctinfo == IP_CT_RELATED ||
+			    ctinfo == IP_CT_RELATED + IP_CT_IS_REPLY));
 
 	/* Source address is 0.0.0.0 - locally generated packet that is
 	 * probably not supposed to be masqueraded.
diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c
index c93ae44..5113b8f 100644
--- a/net/ipv4/netfilter/ipt_REJECT.c
+++ b/net/ipv4/netfilter/ipt_REJECT.c
@@ -184,8 +184,8 @@
 		return false;
 	} else if (rejinfo->with == IPT_TCP_RESET) {
 		/* Must specify that it's a TCP packet */
-		if (e->ip.proto != IPPROTO_TCP
-		    || (e->ip.invflags & XT_INV_PROTO)) {
+		if (e->ip.proto != IPPROTO_TCP ||
+		    (e->ip.invflags & XT_INV_PROTO)) {
 			printk("ipt_REJECT: TCP_RESET invalid for non-tcp\n");
 			return false;
 		}
diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c
index d32cc4b..399061c 100644
--- a/net/ipv4/netfilter/ipt_ULOG.c
+++ b/net/ipv4/netfilter/ipt_ULOG.c
@@ -226,9 +226,9 @@
 	else
 		*(pm->prefix) = '\0';
 
-	if (in && in->hard_header_len > 0
-	    && skb->mac_header != skb->network_header
-	    && in->hard_header_len <= ULOG_MAC_LEN) {
+	if (in && in->hard_header_len > 0 &&
+	    skb->mac_header != skb->network_header &&
+	    in->hard_header_len <= ULOG_MAC_LEN) {
 		memcpy(pm->mac, skb_mac_header(skb), in->hard_header_len);
 		pm->mac_len = in->hard_header_len;
 	} else
diff --git a/net/ipv4/netfilter/ipt_ecn.c b/net/ipv4/netfilter/ipt_ecn.c
index 6289b64..2a1e56b 100644
--- a/net/ipv4/netfilter/ipt_ecn.c
+++ b/net/ipv4/netfilter/ipt_ecn.c
@@ -96,8 +96,8 @@
 	if (info->invert & IPT_ECN_OP_MATCH_MASK)
 		return false;
 
-	if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR)
-	    && ip->proto != IPPROTO_TCP) {
+	if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR) &&
+	    ip->proto != IPPROTO_TCP) {
 		printk(KERN_WARNING "ipt_ecn: can't match TCP bits in rule for"
 		       " non-tcp packets\n");
 		return false;
diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c
index 036047f..fae78c3 100644
--- a/net/ipv4/netfilter/iptable_mangle.c
+++ b/net/ipv4/netfilter/iptable_mangle.c
@@ -130,8 +130,8 @@
 	u_int32_t mark;
 
 	/* root is playing with raw sockets. */
-	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr))
+	if (skb->len < sizeof(struct iphdr) ||
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
 
 	/* Save things which could affect route */
diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c
index 99eb76c6..3bd3d63 100644
--- a/net/ipv4/netfilter/iptable_security.c
+++ b/net/ipv4/netfilter/iptable_security.c
@@ -94,8 +94,8 @@
 		   int (*okfn)(struct sk_buff *))
 {
 	/* Somebody is playing with raw sockets. */
-	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr))
+	if (skb->len < sizeof(struct iphdr) ||
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_security);
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index aa95bb8..d171b12 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -195,7 +195,6 @@
 
 static ctl_table ip_ct_sysctl_table[] = {
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_MAX,
 		.procname	= "ip_conntrack_max",
 		.data		= &nf_conntrack_max,
 		.maxlen		= sizeof(int),
@@ -203,7 +202,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_COUNT,
 		.procname	= "ip_conntrack_count",
 		.data		= &init_net.ct.count,
 		.maxlen		= sizeof(int),
@@ -211,7 +209,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_BUCKETS,
 		.procname	= "ip_conntrack_buckets",
 		.data		= &nf_conntrack_htable_size,
 		.maxlen		= sizeof(unsigned int),
@@ -219,7 +216,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_CHECKSUM,
 		.procname	= "ip_conntrack_checksum",
 		.data		= &init_net.ct.sysctl_checksum,
 		.maxlen		= sizeof(int),
@@ -227,19 +223,15 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_LOG_INVALID,
 		.procname	= "ip_conntrack_log_invalid",
 		.data		= &init_net.ct.sysctl_log_invalid,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &log_invalid_proto_min,
 		.extra2		= &log_invalid_proto_max,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #endif /* CONFIG_SYSCTL && CONFIG_NF_CONNTRACK_PROC_COMPAT */
 
@@ -255,10 +247,10 @@
 	struct nf_conntrack_tuple tuple;
 
 	memset(&tuple, 0, sizeof(tuple));
-	tuple.src.u3.ip = inet->rcv_saddr;
-	tuple.src.u.tcp.port = inet->sport;
-	tuple.dst.u3.ip = inet->daddr;
-	tuple.dst.u.tcp.port = inet->dport;
+	tuple.src.u3.ip = inet->inet_rcv_saddr;
+	tuple.src.u.tcp.port = inet->inet_sport;
+	tuple.dst.u3.ip = inet->inet_daddr;
+	tuple.dst.u.tcp.port = inet->inet_dport;
 	tuple.src.l3num = PF_INET;
 	tuple.dst.protonum = sk->sk_protocol;
 
diff --git a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
index d71ba76..7afd39b 100644
--- a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
@@ -54,8 +54,8 @@
 static bool icmp_invert_tuple(struct nf_conntrack_tuple *tuple,
 			      const struct nf_conntrack_tuple *orig)
 {
-	if (orig->dst.u.icmp.type >= sizeof(invmap)
-	    || !invmap[orig->dst.u.icmp.type])
+	if (orig->dst.u.icmp.type >= sizeof(invmap) ||
+	    !invmap[orig->dst.u.icmp.type])
 		return false;
 
 	tuple->src.u.icmp.id = orig->src.u.icmp.id;
@@ -101,8 +101,8 @@
 		[ICMP_ADDRESS] = 1
 	};
 
-	if (ct->tuplehash[0].tuple.dst.u.icmp.type >= sizeof(valid_new)
-	    || !valid_new[ct->tuplehash[0].tuple.dst.u.icmp.type]) {
+	if (ct->tuplehash[0].tuple.dst.u.icmp.type >= sizeof(valid_new) ||
+	    !valid_new[ct->tuplehash[0].tuple.dst.u.icmp.type]) {
 		/* Can't create a new ICMP `conn' with this. */
 		pr_debug("icmp: can't create new conn with type %u\n",
 			 ct->tuplehash[0].tuple.dst.u.icmp.type);
@@ -201,11 +201,11 @@
 	}
 
 	/* Need to track icmp error message? */
-	if (icmph->type != ICMP_DEST_UNREACH
-	    && icmph->type != ICMP_SOURCE_QUENCH
-	    && icmph->type != ICMP_TIME_EXCEEDED
-	    && icmph->type != ICMP_PARAMETERPROB
-	    && icmph->type != ICMP_REDIRECT)
+	if (icmph->type != ICMP_DEST_UNREACH &&
+	    icmph->type != ICMP_SOURCE_QUENCH &&
+	    icmph->type != ICMP_TIME_EXCEEDED &&
+	    icmph->type != ICMP_PARAMETERPROB &&
+	    icmph->type != ICMP_REDIRECT)
 		return NF_ACCEPT;
 
 	return icmp_error_message(net, skb, ctinfo, hooknum);
@@ -238,17 +238,17 @@
 static int icmp_nlattr_to_tuple(struct nlattr *tb[],
 				struct nf_conntrack_tuple *tuple)
 {
-	if (!tb[CTA_PROTO_ICMP_TYPE]
-	    || !tb[CTA_PROTO_ICMP_CODE]
-	    || !tb[CTA_PROTO_ICMP_ID])
+	if (!tb[CTA_PROTO_ICMP_TYPE] ||
+	    !tb[CTA_PROTO_ICMP_CODE] ||
+	    !tb[CTA_PROTO_ICMP_ID])
 		return -EINVAL;
 
 	tuple->dst.u.icmp.type = nla_get_u8(tb[CTA_PROTO_ICMP_TYPE]);
 	tuple->dst.u.icmp.code = nla_get_u8(tb[CTA_PROTO_ICMP_CODE]);
 	tuple->src.u.icmp.id = nla_get_be16(tb[CTA_PROTO_ICMP_ID]);
 
-	if (tuple->dst.u.icmp.type >= sizeof(invmap)
-	    || !invmap[tuple->dst.u.icmp.type])
+	if (tuple->dst.u.icmp.type >= sizeof(invmap) ||
+	    !invmap[tuple->dst.u.icmp.type])
 		return -EINVAL;
 
 	return 0;
@@ -270,9 +270,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name = 0
-	}
+	{ }
 };
 #ifdef CONFIG_NF_CONNTRACK_PROC_COMPAT
 static struct ctl_table icmp_compat_sysctl_table[] = {
@@ -283,9 +281,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name = 0
-	}
+	{ }
 };
 #endif /* CONFIG_NF_CONNTRACK_PROC_COMPAT */
 #endif /* CONFIG_SYSCTL */
diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c
index f9520fa..7f10a6b 100644
--- a/net/ipv4/netfilter/nf_nat_helper.c
+++ b/net/ipv4/netfilter/nf_nat_helper.c
@@ -41,18 +41,14 @@
 		    struct nf_conn *ct,
 		    enum ip_conntrack_info ctinfo)
 {
-	int dir;
-	struct nf_nat_seq *this_way, *other_way;
+	enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
 	struct nf_conn_nat *nat = nfct_nat(ct);
+	struct nf_nat_seq *this_way = &nat->seq[dir];
 
-	pr_debug("adjust_tcp_sequence: seq = %u, sizediff = %d\n", seq, seq);
+	pr_debug("adjust_tcp_sequence: seq = %u, sizediff = %d\n",
+		 seq, sizediff);
 
-	dir = CTINFO2DIR(ctinfo);
-
-	this_way = &nat->seq[dir];
-	other_way = &nat->seq[!dir];
-
-	pr_debug("nf_nat_resize_packet: Seq_offset before: ");
+	pr_debug("adjust_tcp_sequence: Seq_offset before: ");
 	DUMP_OFFSET(this_way);
 
 	spin_lock_bh(&nf_nat_seqofs_lock);
@@ -63,13 +59,13 @@
 	 * retransmit */
 	if (this_way->offset_before == this_way->offset_after ||
 	    before(this_way->correction_pos, seq)) {
-		   this_way->correction_pos = seq;
-		   this_way->offset_before = this_way->offset_after;
-		   this_way->offset_after += sizediff;
+		this_way->correction_pos = seq;
+		this_way->offset_before = this_way->offset_after;
+		this_way->offset_after += sizediff;
 	}
 	spin_unlock_bh(&nf_nat_seqofs_lock);
 
-	pr_debug("nf_nat_resize_packet: Seq_offset after: ");
+	pr_debug("adjust_tcp_sequence: Seq_offset after: ");
 	DUMP_OFFSET(this_way);
 }
 
diff --git a/net/ipv4/netfilter/nf_nat_standalone.c b/net/ipv4/netfilter/nf_nat_standalone.c
index 5f41d01..5678e95 100644
--- a/net/ipv4/netfilter/nf_nat_standalone.c
+++ b/net/ipv4/netfilter/nf_nat_standalone.c
@@ -197,11 +197,11 @@
 	    (ct = nf_ct_get(skb, &ctinfo)) != NULL) {
 		enum ip_conntrack_dir dir = CTINFO2DIR(ctinfo);
 
-		if (ct->tuplehash[dir].tuple.src.u3.ip !=
-		    ct->tuplehash[!dir].tuple.dst.u3.ip
-		    || ct->tuplehash[dir].tuple.src.u.all !=
-		       ct->tuplehash[!dir].tuple.dst.u.all
-		    )
+		if ((ct->tuplehash[dir].tuple.src.u3.ip !=
+		     ct->tuplehash[!dir].tuple.dst.u3.ip) ||
+		    (ct->tuplehash[dir].tuple.src.u.all !=
+		     ct->tuplehash[!dir].tuple.dst.u.all)
+		   )
 			return ip_xfrm_me_harder(skb) == 0 ? ret : NF_DROP;
 	}
 #endif
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index ab996f9..ce154b4 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -87,7 +87,7 @@
 	struct raw_hashinfo *h = sk->sk_prot->h.raw_hash;
 	struct hlist_head *head;
 
-	head = &h->ht[inet_sk(sk)->num & (RAW_HTABLE_SIZE - 1)];
+	head = &h->ht[inet_sk(sk)->inet_num & (RAW_HTABLE_SIZE - 1)];
 
 	write_lock_bh(&h->lock);
 	sk_add_node(sk, head);
@@ -115,9 +115,9 @@
 	sk_for_each_from(sk, node) {
 		struct inet_sock *inet = inet_sk(sk);
 
-		if (net_eq(sock_net(sk), net) && inet->num == num	&&
-		    !(inet->daddr && inet->daddr != raddr) 		&&
-		    !(inet->rcv_saddr && inet->rcv_saddr != laddr)	&&
+		if (net_eq(sock_net(sk), net) && inet->inet_num == num	&&
+		    !(inet->inet_daddr && inet->inet_daddr != raddr) 	&&
+		    !(inet->inet_rcv_saddr && inet->inet_rcv_saddr != laddr) &&
 		    !(sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif))
 			goto found; /* gotcha */
 	}
@@ -292,7 +292,6 @@
 	/* Charge it to the socket. */
 
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
@@ -327,7 +326,7 @@
 	int err;
 
 	if (length > rt->u.dst.dev->mtu) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->dport,
+		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
 			       rt->u.dst.dev->mtu);
 		return -EMSGSIZE;
 	}
@@ -500,10 +499,10 @@
 		err = -EDESTADDRREQ;
 		if (sk->sk_state != TCP_ESTABLISHED)
 			goto out;
-		daddr = inet->daddr;
+		daddr = inet->inet_daddr;
 	}
 
-	ipc.addr = inet->saddr;
+	ipc.addr = inet->inet_saddr;
 	ipc.opt = NULL;
 	ipc.shtx.flags = 0;
 	ipc.oif = sk->sk_bound_dev_if;
@@ -645,9 +644,9 @@
 	if (addr->sin_addr.s_addr && chk_addr_ret != RTN_LOCAL &&
 	    chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST)
 		goto out;
-	inet->rcv_saddr = inet->saddr = addr->sin_addr.s_addr;
+	inet->inet_rcv_saddr = inet->inet_saddr = addr->sin_addr.s_addr;
 	if (chk_addr_ret == RTN_MULTICAST || chk_addr_ret == RTN_BROADCAST)
-		inet->saddr = 0;  /* Use device */
+		inet->inet_saddr = 0;  /* Use device */
 	sk_dst_reset(sk);
 	ret = 0;
 out:	return ret;
@@ -692,7 +691,7 @@
 	if (err)
 		goto done;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	/* Copy the address. */
 	if (sin) {
@@ -717,7 +716,7 @@
 {
 	struct raw_sock *rp = raw_sk(sk);
 
-	if (inet_sk(sk)->num == IPPROTO_ICMP)
+	if (inet_sk(sk)->inet_num == IPPROTO_ICMP)
 		memset(&rp->filter, 0, sizeof(rp->filter));
 	return 0;
 }
@@ -754,7 +753,7 @@
 			  char __user *optval, unsigned int optlen)
 {
 	if (optname == ICMP_FILTER) {
-		if (inet_sk(sk)->num != IPPROTO_ICMP)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMP)
 			return -EOPNOTSUPP;
 		else
 			return raw_seticmpfilter(sk, optval, optlen);
@@ -784,7 +783,7 @@
 			  char __user *optval, int __user *optlen)
 {
 	if (optname == ICMP_FILTER) {
-		if (inet_sk(sk)->num != IPPROTO_ICMP)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMP)
 			return -EOPNOTSUPP;
 		else
 			return raw_geticmpfilter(sk, optval, optlen);
@@ -943,10 +942,10 @@
 static void raw_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
 {
 	struct inet_sock *inet = inet_sk(sp);
-	__be32 dest = inet->daddr,
-	       src = inet->rcv_saddr;
+	__be32 dest = inet->inet_daddr,
+	       src = inet->inet_rcv_saddr;
 	__u16 destp = 0,
-	      srcp  = inet->num;
+	      srcp  = inet->inet_num;
 
 	seq_printf(seq, "%4d: %08X:%04X %08X:%04X"
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 5b1050a..e446496 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -513,43 +513,42 @@
 };
 
 #ifdef CONFIG_NET_CLS_ROUTE
-static int ip_rt_acct_read(char *buffer, char **start, off_t offset,
-			   int length, int *eof, void *data)
+static int rt_acct_proc_show(struct seq_file *m, void *v)
 {
-	unsigned int i;
+	struct ip_rt_acct *dst, *src;
+	unsigned int i, j;
 
-	if ((offset & 3) || (length & 3))
-		return -EIO;
+	dst = kcalloc(256, sizeof(struct ip_rt_acct), GFP_KERNEL);
+	if (!dst)
+		return -ENOMEM;
 
-	if (offset >= sizeof(struct ip_rt_acct) * 256) {
-		*eof = 1;
-		return 0;
-	}
-
-	if (offset + length >= sizeof(struct ip_rt_acct) * 256) {
-		length = sizeof(struct ip_rt_acct) * 256 - offset;
-		*eof = 1;
-	}
-
-	offset /= sizeof(u32);
-
-	if (length > 0) {
-		u32 *dst = (u32 *) buffer;
-
-		*start = buffer;
-		memset(dst, 0, length);
-
-		for_each_possible_cpu(i) {
-			unsigned int j;
-			u32 *src;
-
-			src = ((u32 *) per_cpu_ptr(ip_rt_acct, i)) + offset;
-			for (j = 0; j < length/4; j++)
-				dst[j] += src[j];
+	for_each_possible_cpu(i) {
+		src = (struct ip_rt_acct *)per_cpu_ptr(ip_rt_acct, i);
+		for (j = 0; j < 256; j++) {
+			dst[j].o_bytes   += src[j].o_bytes;
+			dst[j].o_packets += src[j].o_packets;
+			dst[j].i_bytes   += src[j].i_bytes;
+			dst[j].i_packets += src[j].i_packets;
 		}
 	}
-	return length;
+
+	seq_write(m, dst, 256 * sizeof(struct ip_rt_acct));
+	kfree(dst);
+	return 0;
 }
+
+static int rt_acct_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, rt_acct_proc_show, NULL);
+}
+
+static const struct file_operations rt_acct_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= rt_acct_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 #endif
 
 static int __net_init ip_rt_do_proc_init(struct net *net)
@@ -567,8 +566,7 @@
 		goto err2;
 
 #ifdef CONFIG_NET_CLS_ROUTE
-	pde = create_proc_read_entry("rt_acct", 0, net->proc_net,
-			ip_rt_acct_read, NULL);
+	pde = proc_create("rt_acct", 0, net->proc_net, &rt_acct_proc_fops);
 	if (!pde)
 		goto err3;
 #endif
@@ -703,7 +701,7 @@
 
 static inline int compare_netns(struct rtable *rt1, struct rtable *rt2)
 {
-	return dev_net(rt1->u.dst.dev) == dev_net(rt2->u.dst.dev);
+	return net_eq(dev_net(rt1->u.dst.dev), dev_net(rt2->u.dst.dev));
 }
 
 static inline int rt_is_expired(struct rtable *rth)
@@ -902,6 +900,12 @@
 		rt_do_flush(!in_softirq());
 }
 
+/* Flush previous cache invalidated entries from the cache */
+void rt_cache_flush_batch(void)
+{
+	rt_do_flush(!in_softirq());
+}
+
 /*
  * We change rt_genid and let gc do the cleanup
  */
@@ -1346,9 +1350,9 @@
 		return;
 
 	net = dev_net(dev);
-	if (new_gw == old_gw || !IN_DEV_RX_REDIRECTS(in_dev)
-	    || ipv4_is_multicast(new_gw) || ipv4_is_lbcast(new_gw)
-	    || ipv4_is_zeronet(new_gw))
+	if (new_gw == old_gw || !IN_DEV_RX_REDIRECTS(in_dev) ||
+	    ipv4_is_multicast(new_gw) || ipv4_is_lbcast(new_gw) ||
+	    ipv4_is_zeronet(new_gw))
 		goto reject_redirect;
 
 	if (!rt_caching(net))
@@ -1628,9 +1632,6 @@
 	__be32  daddr = iph->daddr;
 	unsigned short est_mtu = 0;
 
-	if (ipv4_config.no_pmtu_disc)
-		return 0;
-
 	for (k = 0; k < 2; k++) {
 		for (i = 0; i < 2; i++) {
 			unsigned hash = rt_hash(daddr, skeys[i], ikeys[k],
@@ -2314,10 +2315,11 @@
 				ip_hdr(skb)->protocol);
 			if (our
 #ifdef CONFIG_IP_MROUTE
-			    || (!ipv4_is_local_multicast(daddr) &&
-				IN_DEV_MFORWARD(in_dev))
+				||
+			    (!ipv4_is_local_multicast(daddr) &&
+			     IN_DEV_MFORWARD(in_dev))
 #endif
-			    ) {
+			   ) {
 				rcu_read_unlock();
 				return ip_route_input_mc(skb, daddr, saddr,
 							 tos, dev, our);
@@ -2514,9 +2516,9 @@
 		      of another iface. --ANK
 		 */
 
-		if (oldflp->oif == 0
-		    && (ipv4_is_multicast(oldflp->fl4_dst) ||
-			oldflp->fl4_dst == htonl(0xFFFFFFFF))) {
+		if (oldflp->oif == 0 &&
+		    (ipv4_is_multicast(oldflp->fl4_dst) ||
+		     oldflp->fl4_dst == htonl(0xFFFFFFFF))) {
 			/* It is equivalent to inet_addr_type(saddr) == RTN_LOCAL */
 			dev_out = ip_dev_find(net, oldflp->fl4_src);
 			if (dev_out == NULL)
@@ -2855,7 +2857,7 @@
 	error = rt->u.dst.error;
 	expires = rt->u.dst.expires ? rt->u.dst.expires - jiffies : 0;
 	if (rt->peer) {
-		id = rt->peer->ip_id_count;
+		id = atomic_read(&rt->peer->ip_id_count) & 0xffff;
 		if (rt->peer->tcp_ts_stamp) {
 			ts = rt->peer->tcp_ts;
 			tsage = get_seconds() - rt->peer->tcp_ts_stamp;
@@ -3056,23 +3058,6 @@
 	return -EINVAL;
 }
 
-static int ipv4_sysctl_rtcache_flush_strategy(ctl_table *table,
-						void __user *oldval,
-						size_t __user *oldlenp,
-						void __user *newval,
-						size_t newlen)
-{
-	int delay;
-	struct net *net;
-	if (newlen != sizeof(int))
-		return -EINVAL;
-	if (get_user(delay, (int __user *)newval))
-		return -EFAULT;
-	net = (struct net *)table->extra1;
-	rt_cache_flush(net, delay);
-	return 0;
-}
-
 static void rt_secret_reschedule(int old)
 {
 	struct net *net;
@@ -3117,23 +3102,8 @@
 	return ret;
 }
 
-static int ipv4_sysctl_rt_secret_interval_strategy(ctl_table *table,
-						   void __user *oldval,
-						   size_t __user *oldlenp,
-						   void __user *newval,
-						   size_t newlen)
-{
-	int old = ip_rt_secret_interval;
-	int ret = sysctl_jiffies(table, oldval, oldlenp, newval, newlen);
-
-	rt_secret_reschedule(old);
-
-	return ret;
-}
-
 static ctl_table ipv4_route_table[] = {
 	{
-		.ctl_name	= NET_IPV4_ROUTE_GC_THRESH,
 		.procname	= "gc_thresh",
 		.data		= &ipv4_dst_ops.gc_thresh,
 		.maxlen		= sizeof(int),
@@ -3141,7 +3111,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_MAX_SIZE,
 		.procname	= "max_size",
 		.data		= &ip_rt_max_size,
 		.maxlen		= sizeof(int),
@@ -3151,43 +3120,34 @@
 	{
 		/*  Deprecated. Use gc_min_interval_ms */
 
-		.ctl_name	= NET_IPV4_ROUTE_GC_MIN_INTERVAL,
 		.procname	= "gc_min_interval",
 		.data		= &ip_rt_gc_min_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_GC_MIN_INTERVAL_MS,
 		.procname	= "gc_min_interval_ms",
 		.data		= &ip_rt_gc_min_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_ms_jiffies,
-		.strategy	= sysctl_ms_jiffies,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_GC_TIMEOUT,
 		.procname	= "gc_timeout",
 		.data		= &ip_rt_gc_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_GC_INTERVAL,
 		.procname	= "gc_interval",
 		.data		= &ip_rt_gc_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_REDIRECT_LOAD,
 		.procname	= "redirect_load",
 		.data		= &ip_rt_redirect_load,
 		.maxlen		= sizeof(int),
@@ -3195,7 +3155,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_REDIRECT_NUMBER,
 		.procname	= "redirect_number",
 		.data		= &ip_rt_redirect_number,
 		.maxlen		= sizeof(int),
@@ -3203,7 +3162,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_REDIRECT_SILENCE,
 		.procname	= "redirect_silence",
 		.data		= &ip_rt_redirect_silence,
 		.maxlen		= sizeof(int),
@@ -3211,7 +3169,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_ERROR_COST,
 		.procname	= "error_cost",
 		.data		= &ip_rt_error_cost,
 		.maxlen		= sizeof(int),
@@ -3219,7 +3176,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_ERROR_BURST,
 		.procname	= "error_burst",
 		.data		= &ip_rt_error_burst,
 		.maxlen		= sizeof(int),
@@ -3227,7 +3183,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_GC_ELASTICITY,
 		.procname	= "gc_elasticity",
 		.data		= &ip_rt_gc_elasticity,
 		.maxlen		= sizeof(int),
@@ -3235,16 +3190,13 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_MTU_EXPIRES,
 		.procname	= "mtu_expires",
 		.data		= &ip_rt_mtu_expires,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_MIN_PMTU,
 		.procname	= "min_pmtu",
 		.data		= &ip_rt_min_pmtu,
 		.maxlen		= sizeof(int),
@@ -3252,7 +3204,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_MIN_ADVMSS,
 		.procname	= "min_adv_mss",
 		.data		= &ip_rt_min_advmss,
 		.maxlen		= sizeof(int),
@@ -3260,50 +3211,46 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_ROUTE_SECRET_INTERVAL,
 		.procname	= "secret_interval",
 		.data		= &ip_rt_secret_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= ipv4_sysctl_rt_secret_interval,
-		.strategy	= ipv4_sysctl_rt_secret_interval_strategy,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table empty[1];
 
 static struct ctl_table ipv4_skeleton[] =
 {
-	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE,
+	{ .procname = "route", 
 	  .mode = 0555, .child = ipv4_route_table},
-	{ .procname = "neigh", .ctl_name = NET_IPV4_NEIGH,
+	{ .procname = "neigh", 
 	  .mode = 0555, .child = empty},
 	{ }
 };
 
 static __net_initdata struct ctl_path ipv4_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "net", },
+	{ .procname = "ipv4", },
 	{ },
 };
 
 static struct ctl_table ipv4_route_flush_table[] = {
 	{
-		.ctl_name 	= NET_IPV4_ROUTE_FLUSH,
 		.procname	= "flush",
 		.maxlen		= sizeof(int),
 		.mode		= 0200,
 		.proc_handler	= ipv4_sysctl_rtcache_flush,
-		.strategy	= ipv4_sysctl_rtcache_flush_strategy,
 	},
-	{ .ctl_name = 0 },
+	{ },
 };
 
 static __net_initdata struct ctl_path ipv4_route_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
-	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
+	{ .procname = "net", },
+	{ .procname = "ipv4", },
+	{ .procname = "route", },
 	{ },
 };
 
@@ -3312,7 +3259,7 @@
 	struct ctl_table *tbl;
 
 	tbl = ipv4_route_flush_table;
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		tbl = kmemdup(tbl, sizeof(ipv4_route_flush_table), GFP_KERNEL);
 		if (tbl == NULL)
 			goto err_dup;
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index a6e0e07..26399ad 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -253,6 +253,8 @@
 struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 			     struct ip_options *opt)
 {
+	struct tcp_options_received tcp_opt;
+	u8 *hash_location;
 	struct inet_request_sock *ireq;
 	struct tcp_request_sock *treq;
 	struct tcp_sock *tp = tcp_sk(sk);
@@ -263,7 +265,6 @@
 	int mss;
 	struct rtable *rt;
 	__u8 rcv_wscale;
-	struct tcp_options_received tcp_opt;
 
 	if (!sysctl_tcp_syncookies || !th->ack)
 		goto out;
@@ -276,13 +277,6 @@
 
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESRECV);
 
-	/* check for timestamp cookie support */
-	memset(&tcp_opt, 0, sizeof(tcp_opt));
-	tcp_parse_options(skb, &tcp_opt, 0);
-
-	if (tcp_opt.saw_tstamp)
-		cookie_check_timestamp(&tcp_opt);
-
 	ret = NULL;
 	req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */
 	if (!req)
@@ -298,12 +292,6 @@
 	ireq->loc_addr		= ip_hdr(skb)->daddr;
 	ireq->rmt_addr		= ip_hdr(skb)->saddr;
 	ireq->ecn_ok		= 0;
-	ireq->snd_wscale	= tcp_opt.snd_wscale;
-	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
-	ireq->sack_ok		= tcp_opt.sack_ok;
-	ireq->wscale_ok		= tcp_opt.wscale_ok;
-	ireq->tstamp_ok		= tcp_opt.saw_tstamp;
-	req->ts_recent		= tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
 
 	/* We throwed the options of the initial SYN away, so we hope
 	 * the ACK carries the same options again (see RFC1122 4.2.3.8)
@@ -333,7 +321,8 @@
 	 * no easy way to do this.
 	 */
 	{
-		struct flowi fl = { .nl_u = { .ip4_u =
+		struct flowi fl = { .mark = sk->sk_mark,
+				    .nl_u = { .ip4_u =
 					      { .daddr = ((opt && opt->srr) ?
 							  opt->faddr :
 							  ireq->rmt_addr),
@@ -351,6 +340,20 @@
 		}
 	}
 
+	/* check for timestamp cookie support */
+	memset(&tcp_opt, 0, sizeof(tcp_opt));
+	tcp_parse_options(skb, &tcp_opt, &hash_location, 0, &rt->u.dst);
+
+	if (tcp_opt.saw_tstamp)
+		cookie_check_timestamp(&tcp_opt);
+
+	ireq->snd_wscale        = tcp_opt.snd_wscale;
+	ireq->rcv_wscale        = tcp_opt.rcv_wscale;
+	ireq->sack_ok           = tcp_opt.sack_ok;
+	ireq->wscale_ok         = tcp_opt.wscale_ok;
+	ireq->tstamp_ok         = tcp_opt.saw_tstamp;
+	req->ts_recent          = tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
+
 	/* Try to redo what tcp_v4_send_synack did. */
 	req->window_clamp = tp->window_clamp ? :dst_metric(&rt->u.dst, RTAX_WINDOW);
 
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 2dcf04d..7e3712c 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -63,34 +63,6 @@
 	return ret;
 }
 
-/* Validate changes from sysctl interface. */
-static int ipv4_sysctl_local_port_range(ctl_table *table,
-					 void __user *oldval,
-					 size_t __user *oldlenp,
-					void __user *newval, size_t newlen)
-{
-	int ret;
-	int range[2];
-	ctl_table tmp = {
-		.data = &range,
-		.maxlen = sizeof(range),
-		.mode = table->mode,
-		.extra1 = &ip_local_port_range_min,
-		.extra2 = &ip_local_port_range_max,
-	};
-
-	inet_get_local_port_range(range, range + 1);
-	ret = sysctl_intvec(&tmp, oldval, oldlenp, newval, newlen);
-	if (ret == 0 && newval && newlen) {
-		if (range[1] < range[0])
-			ret = -EINVAL;
-		else
-			set_local_port_range(range);
-	}
-	return ret;
-}
-
-
 static int proc_tcp_congestion_control(ctl_table *ctl, int write,
 				       void __user *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -109,25 +81,6 @@
 	return ret;
 }
 
-static int sysctl_tcp_congestion_control(ctl_table *table,
-					 void __user *oldval,
-					 size_t __user *oldlenp,
-					 void __user *newval, size_t newlen)
-{
-	char val[TCP_CA_NAME_MAX];
-	ctl_table tbl = {
-		.data = val,
-		.maxlen = TCP_CA_NAME_MAX,
-	};
-	int ret;
-
-	tcp_get_default_congestion_control(val);
-	ret = sysctl_string(&tbl, oldval, oldlenp, newval, newlen);
-	if (ret == 1 && newval && newlen)
-		ret = tcp_set_default_congestion_control(val);
-	return ret;
-}
-
 static int proc_tcp_available_congestion_control(ctl_table *ctl,
 						 int write,
 						 void __user *buffer, size_t *lenp,
@@ -165,32 +118,8 @@
 	return ret;
 }
 
-static int strategy_allowed_congestion_control(ctl_table *table,
-					       void __user *oldval,
-					       size_t __user *oldlenp,
-					       void __user *newval,
-					       size_t newlen)
-{
-	ctl_table tbl = { .maxlen = TCP_CA_BUF_MAX };
-	int ret;
-
-	tbl.data = kmalloc(tbl.maxlen, GFP_USER);
-	if (!tbl.data)
-		return -ENOMEM;
-
-	tcp_get_available_congestion_control(tbl.data, tbl.maxlen);
-	ret = sysctl_string(&tbl, oldval, oldlenp, newval, newlen);
-	if (ret == 1 && newval && newlen)
-		ret = tcp_set_allowed_congestion_control(tbl.data);
-	kfree(tbl.data);
-
-	return ret;
-
-}
-
 static struct ctl_table ipv4_table[] = {
 	{
-		.ctl_name	= NET_IPV4_TCP_TIMESTAMPS,
 		.procname	= "tcp_timestamps",
 		.data		= &sysctl_tcp_timestamps,
 		.maxlen		= sizeof(int),
@@ -198,7 +127,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_WINDOW_SCALING,
 		.procname	= "tcp_window_scaling",
 		.data		= &sysctl_tcp_window_scaling,
 		.maxlen		= sizeof(int),
@@ -206,7 +134,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_SACK,
 		.procname	= "tcp_sack",
 		.data		= &sysctl_tcp_sack,
 		.maxlen		= sizeof(int),
@@ -214,7 +141,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_RETRANS_COLLAPSE,
 		.procname	= "tcp_retrans_collapse",
 		.data		= &sysctl_tcp_retrans_collapse,
 		.maxlen		= sizeof(int),
@@ -222,17 +148,14 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_DEFAULT_TTL,
 		.procname	= "ip_default_ttl",
 		.data		= &sysctl_ip_default_ttl,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= ipv4_doint_and_flush,
-		.strategy	= ipv4_doint_and_flush_strategy,
 		.extra2		= &init_net,
 	},
 	{
-		.ctl_name	= NET_IPV4_NO_PMTU_DISC,
 		.procname	= "ip_no_pmtu_disc",
 		.data		= &ipv4_config.no_pmtu_disc,
 		.maxlen		= sizeof(int),
@@ -240,7 +163,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_NONLOCAL_BIND,
 		.procname	= "ip_nonlocal_bind",
 		.data		= &sysctl_ip_nonlocal_bind,
 		.maxlen		= sizeof(int),
@@ -248,7 +170,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_SYN_RETRIES,
 		.procname	= "tcp_syn_retries",
 		.data		= &sysctl_tcp_syn_retries,
 		.maxlen		= sizeof(int),
@@ -256,7 +177,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_SYNACK_RETRIES,
 		.procname	= "tcp_synack_retries",
 		.data		= &sysctl_tcp_synack_retries,
 		.maxlen		= sizeof(int),
@@ -264,7 +184,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_MAX_ORPHANS,
 		.procname	= "tcp_max_orphans",
 		.data		= &sysctl_tcp_max_orphans,
 		.maxlen		= sizeof(int),
@@ -272,7 +191,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_MAX_TW_BUCKETS,
 		.procname	= "tcp_max_tw_buckets",
 		.data		= &tcp_death_row.sysctl_max_tw_buckets,
 		.maxlen		= sizeof(int),
@@ -280,7 +198,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_DYNADDR,
 		.procname	= "ip_dynaddr",
 		.data		= &sysctl_ip_dynaddr,
 		.maxlen		= sizeof(int),
@@ -288,16 +205,13 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_KEEPALIVE_TIME,
 		.procname	= "tcp_keepalive_time",
 		.data		= &sysctl_tcp_keepalive_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_KEEPALIVE_PROBES,
 		.procname	= "tcp_keepalive_probes",
 		.data		= &sysctl_tcp_keepalive_probes,
 		.maxlen		= sizeof(int),
@@ -305,26 +219,21 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_KEEPALIVE_INTVL,
 		.procname	= "tcp_keepalive_intvl",
 		.data		= &sysctl_tcp_keepalive_intvl,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_RETRIES1,
 		.procname	= "tcp_retries1",
 		.data		= &sysctl_tcp_retries1,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra2		= &tcp_retr1_max
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_RETRIES2,
 		.procname	= "tcp_retries2",
 		.data		= &sysctl_tcp_retries2,
 		.maxlen		= sizeof(int),
@@ -332,17 +241,14 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_FIN_TIMEOUT,
 		.procname	= "tcp_fin_timeout",
 		.data		= &sysctl_tcp_fin_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 #ifdef CONFIG_SYN_COOKIES
 	{
-		.ctl_name	= NET_TCP_SYNCOOKIES,
 		.procname	= "tcp_syncookies",
 		.data		= &sysctl_tcp_syncookies,
 		.maxlen		= sizeof(int),
@@ -351,7 +257,6 @@
 	},
 #endif
 	{
-		.ctl_name	= NET_TCP_TW_RECYCLE,
 		.procname	= "tcp_tw_recycle",
 		.data		= &tcp_death_row.sysctl_tw_recycle,
 		.maxlen		= sizeof(int),
@@ -359,7 +264,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_ABORT_ON_OVERFLOW,
 		.procname	= "tcp_abort_on_overflow",
 		.data		= &sysctl_tcp_abort_on_overflow,
 		.maxlen		= sizeof(int),
@@ -367,7 +271,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_STDURG,
 		.procname	= "tcp_stdurg",
 		.data		= &sysctl_tcp_stdurg,
 		.maxlen		= sizeof(int),
@@ -375,7 +278,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_RFC1337,
 		.procname	= "tcp_rfc1337",
 		.data		= &sysctl_tcp_rfc1337,
 		.maxlen		= sizeof(int),
@@ -383,7 +285,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_MAX_SYN_BACKLOG,
 		.procname	= "tcp_max_syn_backlog",
 		.data		= &sysctl_max_syn_backlog,
 		.maxlen		= sizeof(int),
@@ -391,17 +292,14 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_LOCAL_PORT_RANGE,
 		.procname	= "ip_local_port_range",
 		.data		= &sysctl_local_ports.range,
 		.maxlen		= sizeof(sysctl_local_ports.range),
 		.mode		= 0644,
 		.proc_handler	= ipv4_local_port_range,
-		.strategy	= ipv4_sysctl_local_port_range,
 	},
 #ifdef CONFIG_IP_MULTICAST
 	{
-		.ctl_name	= NET_IPV4_IGMP_MAX_MEMBERSHIPS,
 		.procname	= "igmp_max_memberships",
 		.data		= &sysctl_igmp_max_memberships,
 		.maxlen		= sizeof(int),
@@ -411,7 +309,6 @@
 
 #endif
 	{
-		.ctl_name	= NET_IPV4_IGMP_MAX_MSF,
 		.procname	= "igmp_max_msf",
 		.data		= &sysctl_igmp_max_msf,
 		.maxlen		= sizeof(int),
@@ -419,7 +316,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_INET_PEER_THRESHOLD,
 		.procname	= "inet_peer_threshold",
 		.data		= &inet_peer_threshold,
 		.maxlen		= sizeof(int),
@@ -427,43 +323,34 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_INET_PEER_MINTTL,
 		.procname	= "inet_peer_minttl",
 		.data		= &inet_peer_minttl,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
-		.ctl_name	= NET_IPV4_INET_PEER_MAXTTL,
 		.procname	= "inet_peer_maxttl",
 		.data		= &inet_peer_maxttl,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
-		.ctl_name	= NET_IPV4_INET_PEER_GC_MINTIME,
 		.procname	= "inet_peer_gc_mintime",
 		.data		= &inet_peer_gc_mintime,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
-		.ctl_name	= NET_IPV4_INET_PEER_GC_MAXTIME,
 		.procname	= "inet_peer_gc_maxtime",
 		.data		= &inet_peer_gc_maxtime,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{
-		.ctl_name	= NET_TCP_ORPHAN_RETRIES,
 		.procname	= "tcp_orphan_retries",
 		.data		= &sysctl_tcp_orphan_retries,
 		.maxlen		= sizeof(int),
@@ -471,7 +358,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_FACK,
 		.procname	= "tcp_fack",
 		.data		= &sysctl_tcp_fack,
 		.maxlen		= sizeof(int),
@@ -479,7 +365,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_REORDERING,
 		.procname	= "tcp_reordering",
 		.data		= &sysctl_tcp_reordering,
 		.maxlen		= sizeof(int),
@@ -487,7 +372,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_ECN,
 		.procname	= "tcp_ecn",
 		.data		= &sysctl_tcp_ecn,
 		.maxlen		= sizeof(int),
@@ -495,7 +379,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_DSACK,
 		.procname	= "tcp_dsack",
 		.data		= &sysctl_tcp_dsack,
 		.maxlen		= sizeof(int),
@@ -503,7 +386,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_MEM,
 		.procname	= "tcp_mem",
 		.data		= &sysctl_tcp_mem,
 		.maxlen		= sizeof(sysctl_tcp_mem),
@@ -511,7 +393,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_WMEM,
 		.procname	= "tcp_wmem",
 		.data		= &sysctl_tcp_wmem,
 		.maxlen		= sizeof(sysctl_tcp_wmem),
@@ -519,7 +400,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_RMEM,
 		.procname	= "tcp_rmem",
 		.data		= &sysctl_tcp_rmem,
 		.maxlen		= sizeof(sysctl_tcp_rmem),
@@ -527,7 +407,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_APP_WIN,
 		.procname	= "tcp_app_win",
 		.data		= &sysctl_tcp_app_win,
 		.maxlen		= sizeof(int),
@@ -535,7 +414,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_ADV_WIN_SCALE,
 		.procname	= "tcp_adv_win_scale",
 		.data		= &sysctl_tcp_adv_win_scale,
 		.maxlen		= sizeof(int),
@@ -543,7 +421,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_TW_REUSE,
 		.procname	= "tcp_tw_reuse",
 		.data		= &sysctl_tcp_tw_reuse,
 		.maxlen		= sizeof(int),
@@ -551,7 +428,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_FRTO,
 		.procname	= "tcp_frto",
 		.data		= &sysctl_tcp_frto,
 		.maxlen		= sizeof(int),
@@ -559,7 +435,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_FRTO_RESPONSE,
 		.procname	= "tcp_frto_response",
 		.data		= &sysctl_tcp_frto_response,
 		.maxlen		= sizeof(int),
@@ -567,7 +442,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_LOW_LATENCY,
 		.procname	= "tcp_low_latency",
 		.data		= &sysctl_tcp_low_latency,
 		.maxlen		= sizeof(int),
@@ -575,7 +449,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_TCP_NO_METRICS_SAVE,
 		.procname	= "tcp_no_metrics_save",
 		.data		= &sysctl_tcp_nometrics_save,
 		.maxlen		= sizeof(int),
@@ -583,7 +456,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_TCP_MODERATE_RCVBUF,
 		.procname	= "tcp_moderate_rcvbuf",
 		.data		= &sysctl_tcp_moderate_rcvbuf,
 		.maxlen		= sizeof(int),
@@ -591,7 +463,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_TCP_TSO_WIN_DIVISOR,
 		.procname	= "tcp_tso_win_divisor",
 		.data		= &sysctl_tcp_tso_win_divisor,
 		.maxlen		= sizeof(int),
@@ -599,15 +470,12 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_TCP_CONG_CONTROL,
 		.procname	= "tcp_congestion_control",
 		.mode		= 0644,
 		.maxlen		= TCP_CA_NAME_MAX,
 		.proc_handler	= proc_tcp_congestion_control,
-		.strategy	= sysctl_tcp_congestion_control,
 	},
 	{
-		.ctl_name	= NET_TCP_ABC,
 		.procname	= "tcp_abc",
 		.data		= &sysctl_tcp_abc,
 		.maxlen		= sizeof(int),
@@ -615,7 +483,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_TCP_MTU_PROBING,
 		.procname	= "tcp_mtu_probing",
 		.data		= &sysctl_tcp_mtu_probing,
 		.maxlen		= sizeof(int),
@@ -623,7 +490,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_TCP_BASE_MSS,
 		.procname	= "tcp_base_mss",
 		.data		= &sysctl_tcp_base_mss,
 		.maxlen		= sizeof(int),
@@ -631,7 +497,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_TCP_WORKAROUND_SIGNED_WINDOWS,
 		.procname	= "tcp_workaround_signed_windows",
 		.data		= &sysctl_tcp_workaround_signed_windows,
 		.maxlen		= sizeof(int),
@@ -640,7 +505,6 @@
 	},
 #ifdef CONFIG_NET_DMA
 	{
-		.ctl_name	= NET_TCP_DMA_COPYBREAK,
 		.procname	= "tcp_dma_copybreak",
 		.data		= &sysctl_tcp_dma_copybreak,
 		.maxlen		= sizeof(int),
@@ -649,7 +513,6 @@
 	},
 #endif
 	{
-		.ctl_name	= NET_TCP_SLOW_START_AFTER_IDLE,
 		.procname	= "tcp_slow_start_after_idle",
 		.data		= &sysctl_tcp_slow_start_after_idle,
 		.maxlen		= sizeof(int),
@@ -658,7 +521,6 @@
 	},
 #ifdef CONFIG_NETLABEL
 	{
-		.ctl_name	= NET_CIPSOV4_CACHE_ENABLE,
 		.procname	= "cipso_cache_enable",
 		.data		= &cipso_v4_cache_enabled,
 		.maxlen		= sizeof(int),
@@ -666,7 +528,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_CIPSOV4_CACHE_BUCKET_SIZE,
 		.procname	= "cipso_cache_bucket_size",
 		.data		= &cipso_v4_cache_bucketsize,
 		.maxlen		= sizeof(int),
@@ -674,7 +535,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_CIPSOV4_RBM_OPTFMT,
 		.procname	= "cipso_rbm_optfmt",
 		.data		= &cipso_v4_rbm_optfmt,
 		.maxlen		= sizeof(int),
@@ -682,7 +542,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_CIPSOV4_RBM_STRICTVALID,
 		.procname	= "cipso_rbm_strictvalid",
 		.data		= &cipso_v4_rbm_strictvalid,
 		.maxlen		= sizeof(int),
@@ -697,15 +556,12 @@
 		.proc_handler   = proc_tcp_available_congestion_control,
 	},
 	{
-		.ctl_name	= NET_TCP_ALLOWED_CONG_CONTROL,
 		.procname	= "tcp_allowed_congestion_control",
 		.maxlen		= TCP_CA_BUF_MAX,
 		.mode		= 0644,
 		.proc_handler   = proc_allowed_congestion_control,
-		.strategy	= strategy_allowed_congestion_control,
 	},
 	{
-		.ctl_name	= NET_TCP_MAX_SSTHRESH,
 		.procname	= "tcp_max_ssthresh",
 		.data		= &sysctl_tcp_max_ssthresh,
 		.maxlen		= sizeof(int),
@@ -713,41 +569,41 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "tcp_cookie_size",
+		.data		= &sysctl_tcp_cookie_size,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec
+	},
+	{
 		.procname	= "udp_mem",
 		.data		= &sysctl_udp_mem,
 		.maxlen		= sizeof(sysctl_udp_mem),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &zero
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "udp_rmem_min",
 		.data		= &sysctl_udp_rmem_min,
 		.maxlen		= sizeof(sysctl_udp_rmem_min),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &zero
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "udp_wmem_min",
 		.data		= &sysctl_udp_wmem_min,
 		.maxlen		= sizeof(sysctl_udp_wmem_min),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &zero
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table ipv4_net_table[] = {
 	{
-		.ctl_name	= NET_IPV4_ICMP_ECHO_IGNORE_ALL,
 		.procname	= "icmp_echo_ignore_all",
 		.data		= &init_net.ipv4.sysctl_icmp_echo_ignore_all,
 		.maxlen		= sizeof(int),
@@ -755,7 +611,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_ICMP_ECHO_IGNORE_BROADCASTS,
 		.procname	= "icmp_echo_ignore_broadcasts",
 		.data		= &init_net.ipv4.sysctl_icmp_echo_ignore_broadcasts,
 		.maxlen		= sizeof(int),
@@ -763,7 +618,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_ICMP_IGNORE_BOGUS_ERROR_RESPONSES,
 		.procname	= "icmp_ignore_bogus_error_responses",
 		.data		= &init_net.ipv4.sysctl_icmp_ignore_bogus_error_responses,
 		.maxlen		= sizeof(int),
@@ -771,7 +625,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR,
 		.procname	= "icmp_errors_use_inbound_ifaddr",
 		.data		= &init_net.ipv4.sysctl_icmp_errors_use_inbound_ifaddr,
 		.maxlen		= sizeof(int),
@@ -779,16 +632,13 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV4_ICMP_RATELIMIT,
 		.procname	= "icmp_ratelimit",
 		.data		= &init_net.ipv4.sysctl_icmp_ratelimit,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_ms_jiffies,
-		.strategy	= sysctl_ms_jiffies
 	},
 	{
-		.ctl_name	= NET_IPV4_ICMP_RATEMASK,
 		.procname	= "icmp_ratemask",
 		.data		= &init_net.ipv4.sysctl_icmp_ratemask,
 		.maxlen		= sizeof(int),
@@ -796,7 +646,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "rt_cache_rebuild_count",
 		.data		= &init_net.ipv4.sysctl_rt_cache_rebuild_count,
 		.maxlen		= sizeof(int),
@@ -807,8 +656,8 @@
 };
 
 struct ctl_path net_ipv4_ctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "net", },
+	{ .procname = "ipv4", },
 	{ },
 };
 EXPORT_SYMBOL_GPL(net_ipv4_ctl_path);
@@ -818,7 +667,7 @@
 	struct ctl_table *table;
 
 	table = ipv4_net_table;
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		table = kmemdup(table, sizeof(ipv4_net_table), GFP_KERNEL);
 		if (table == NULL)
 			goto err_alloc;
@@ -849,7 +698,7 @@
 	return 0;
 
 err_reg:
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		kfree(table);
 err_alloc:
 	return -ENOMEM;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index f1813bc..c8666b7 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -264,6 +264,7 @@
 #include <linux/cache.h>
 #include <linux/err.h>
 #include <linux/crypto.h>
+#include <linux/time.h>
 
 #include <net/icmp.h>
 #include <net/tcp.h>
@@ -2042,7 +2043,7 @@
 	__skb_queue_purge(&sk->sk_async_wait_queue);
 #endif
 
-	inet->dport = 0;
+	inet->inet_dport = 0;
 
 	if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
 		inet_reset_saddr(sk);
@@ -2059,6 +2060,7 @@
 	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 	tp->snd_cwnd_cnt = 0;
 	tp->bytes_acked = 0;
+	tp->window_clamp = 0;
 	tcp_set_ca_state(sk, TCP_CA_Open);
 	tcp_clear_retrans(tp);
 	inet_csk_delack_init(sk);
@@ -2066,7 +2068,7 @@
 	memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
 	__sk_dst_reset(sk);
 
-	WARN_ON(inet->num && !icsk->icsk_bind_hash);
+	WARN_ON(inet->inet_num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
@@ -2083,8 +2085,9 @@
 	int val;
 	int err = 0;
 
-	/* This is a string value all the others are int's */
-	if (optname == TCP_CONGESTION) {
+	/* These are data/string values, all the others are ints */
+	switch (optname) {
+	case TCP_CONGESTION: {
 		char name[TCP_CA_NAME_MAX];
 
 		if (optlen < 1)
@@ -2101,6 +2104,93 @@
 		release_sock(sk);
 		return err;
 	}
+	case TCP_COOKIE_TRANSACTIONS: {
+		struct tcp_cookie_transactions ctd;
+		struct tcp_cookie_values *cvp = NULL;
+
+		if (sizeof(ctd) > optlen)
+			return -EINVAL;
+		if (copy_from_user(&ctd, optval, sizeof(ctd)))
+			return -EFAULT;
+
+		if (ctd.tcpct_used > sizeof(ctd.tcpct_value) ||
+		    ctd.tcpct_s_data_desired > TCP_MSS_DESIRED)
+			return -EINVAL;
+
+		if (ctd.tcpct_cookie_desired == 0) {
+			/* default to global value */
+		} else if ((0x1 & ctd.tcpct_cookie_desired) ||
+			   ctd.tcpct_cookie_desired > TCP_COOKIE_MAX ||
+			   ctd.tcpct_cookie_desired < TCP_COOKIE_MIN) {
+			return -EINVAL;
+		}
+
+		if (TCP_COOKIE_OUT_NEVER & ctd.tcpct_flags) {
+			/* Supercedes all other values */
+			lock_sock(sk);
+			if (tp->cookie_values != NULL) {
+				kref_put(&tp->cookie_values->kref,
+					 tcp_cookie_values_release);
+				tp->cookie_values = NULL;
+			}
+			tp->rx_opt.cookie_in_always = 0; /* false */
+			tp->rx_opt.cookie_out_never = 1; /* true */
+			release_sock(sk);
+			return err;
+		}
+
+		/* Allocate ancillary memory before locking.
+		 */
+		if (ctd.tcpct_used > 0 ||
+		    (tp->cookie_values == NULL &&
+		     (sysctl_tcp_cookie_size > 0 ||
+		      ctd.tcpct_cookie_desired > 0 ||
+		      ctd.tcpct_s_data_desired > 0))) {
+			cvp = kzalloc(sizeof(*cvp) + ctd.tcpct_used,
+				      GFP_KERNEL);
+			if (cvp == NULL)
+				return -ENOMEM;
+		}
+		lock_sock(sk);
+		tp->rx_opt.cookie_in_always =
+			(TCP_COOKIE_IN_ALWAYS & ctd.tcpct_flags);
+		tp->rx_opt.cookie_out_never = 0; /* false */
+
+		if (tp->cookie_values != NULL) {
+			if (cvp != NULL) {
+				/* Changed values are recorded by a changed
+				 * pointer, ensuring the cookie will differ,
+				 * without separately hashing each value later.
+				 */
+				kref_put(&tp->cookie_values->kref,
+					 tcp_cookie_values_release);
+				kref_init(&cvp->kref);
+				tp->cookie_values = cvp;
+			} else {
+				cvp = tp->cookie_values;
+			}
+		}
+		if (cvp != NULL) {
+			cvp->cookie_desired = ctd.tcpct_cookie_desired;
+
+			if (ctd.tcpct_used > 0) {
+				memcpy(cvp->s_data_payload, ctd.tcpct_value,
+				       ctd.tcpct_used);
+				cvp->s_data_desired = ctd.tcpct_used;
+				cvp->s_data_constant = 1; /* true */
+			} else {
+				/* No constant payload data. */
+				cvp->s_data_desired = ctd.tcpct_s_data_desired;
+				cvp->s_data_constant = 0; /* false */
+			}
+		}
+		release_sock(sk);
+		return err;
+	}
+	default:
+		/* fallthru */
+		break;
+	};
 
 	if (optlen < sizeof(int))
 		return -EINVAL;
@@ -2425,6 +2515,47 @@
 		if (copy_to_user(optval, icsk->icsk_ca_ops->name, len))
 			return -EFAULT;
 		return 0;
+
+	case TCP_COOKIE_TRANSACTIONS: {
+		struct tcp_cookie_transactions ctd;
+		struct tcp_cookie_values *cvp = tp->cookie_values;
+
+		if (get_user(len, optlen))
+			return -EFAULT;
+		if (len < sizeof(ctd))
+			return -EINVAL;
+
+		memset(&ctd, 0, sizeof(ctd));
+		ctd.tcpct_flags = (tp->rx_opt.cookie_in_always ?
+				   TCP_COOKIE_IN_ALWAYS : 0)
+				| (tp->rx_opt.cookie_out_never ?
+				   TCP_COOKIE_OUT_NEVER : 0);
+
+		if (cvp != NULL) {
+			ctd.tcpct_flags |= (cvp->s_data_in ?
+					    TCP_S_DATA_IN : 0)
+					 | (cvp->s_data_out ?
+					    TCP_S_DATA_OUT : 0);
+
+			ctd.tcpct_cookie_desired = cvp->cookie_desired;
+			ctd.tcpct_s_data_desired = cvp->s_data_desired;
+
+			/* Cookie(s) saved, return as nonce */
+			if (sizeof(ctd.tcpct_value) < cvp->cookie_pair_size) {
+				/* impossible? */
+				return -EINVAL;
+			}
+			memcpy(&ctd.tcpct_value[0], &cvp->cookie_pair[0],
+			       cvp->cookie_pair_size);
+			ctd.tcpct_used = cvp->cookie_pair_size;
+		}
+
+		if (put_user(sizeof(ctd), optlen))
+			return -EFAULT;
+		if (copy_to_user(optval, &ctd, sizeof(ctd)))
+			return -EFAULT;
+		return 0;
+	}
 	default:
 		return -ENOPROTOOPT;
 	}
@@ -2847,6 +2978,135 @@
 
 #endif
 
+/**
+ * Each Responder maintains up to two secret values concurrently for
+ * efficient secret rollover.  Each secret value has 4 states:
+ *
+ * Generating.  (tcp_secret_generating != tcp_secret_primary)
+ *    Generates new Responder-Cookies, but not yet used for primary
+ *    verification.  This is a short-term state, typically lasting only
+ *    one round trip time (RTT).
+ *
+ * Primary.  (tcp_secret_generating == tcp_secret_primary)
+ *    Used both for generation and primary verification.
+ *
+ * Retiring.  (tcp_secret_retiring != tcp_secret_secondary)
+ *    Used for verification, until the first failure that can be
+ *    verified by the newer Generating secret.  At that time, this
+ *    cookie's state is changed to Secondary, and the Generating
+ *    cookie's state is changed to Primary.  This is a short-term state,
+ *    typically lasting only one round trip time (RTT).
+ *
+ * Secondary.  (tcp_secret_retiring == tcp_secret_secondary)
+ *    Used for secondary verification, after primary verification
+ *    failures.  This state lasts no more than twice the Maximum Segment
+ *    Lifetime (2MSL).  Then, the secret is discarded.
+ */
+struct tcp_cookie_secret {
+	/* The secret is divided into two parts.  The digest part is the
+	 * equivalent of previously hashing a secret and saving the state,
+	 * and serves as an initialization vector (IV).  The message part
+	 * serves as the trailing secret.
+	 */
+	u32				secrets[COOKIE_WORKSPACE_WORDS];
+	unsigned long			expires;
+};
+
+#define TCP_SECRET_1MSL (HZ * TCP_PAWS_MSL)
+#define TCP_SECRET_2MSL (HZ * TCP_PAWS_MSL * 2)
+#define TCP_SECRET_LIFE (HZ * 600)
+
+static struct tcp_cookie_secret tcp_secret_one;
+static struct tcp_cookie_secret tcp_secret_two;
+
+/* Essentially a circular list, without dynamic allocation. */
+static struct tcp_cookie_secret *tcp_secret_generating;
+static struct tcp_cookie_secret *tcp_secret_primary;
+static struct tcp_cookie_secret *tcp_secret_retiring;
+static struct tcp_cookie_secret *tcp_secret_secondary;
+
+static DEFINE_SPINLOCK(tcp_secret_locker);
+
+/* Select a pseudo-random word in the cookie workspace.
+ */
+static inline u32 tcp_cookie_work(const u32 *ws, const int n)
+{
+	return ws[COOKIE_DIGEST_WORDS + ((COOKIE_MESSAGE_WORDS-1) & ws[n])];
+}
+
+/* Fill bakery[COOKIE_WORKSPACE_WORDS] with generator, updating as needed.
+ * Called in softirq context.
+ * Returns: 0 for success.
+ */
+int tcp_cookie_generator(u32 *bakery)
+{
+	unsigned long jiffy = jiffies;
+
+	if (unlikely(time_after_eq(jiffy, tcp_secret_generating->expires))) {
+		spin_lock_bh(&tcp_secret_locker);
+		if (!time_after_eq(jiffy, tcp_secret_generating->expires)) {
+			/* refreshed by another */
+			memcpy(bakery,
+			       &tcp_secret_generating->secrets[0],
+			       COOKIE_WORKSPACE_WORDS);
+		} else {
+			/* still needs refreshing */
+			get_random_bytes(bakery, COOKIE_WORKSPACE_WORDS);
+
+			/* The first time, paranoia assumes that the
+			 * randomization function isn't as strong.  But,
+			 * this secret initialization is delayed until
+			 * the last possible moment (packet arrival).
+			 * Although that time is observable, it is
+			 * unpredictably variable.  Mash in the most
+			 * volatile clock bits available, and expire the
+			 * secret extra quickly.
+			 */
+			if (unlikely(tcp_secret_primary->expires ==
+				     tcp_secret_secondary->expires)) {
+				struct timespec tv;
+
+				getnstimeofday(&tv);
+				bakery[COOKIE_DIGEST_WORDS+0] ^=
+					(u32)tv.tv_nsec;
+
+				tcp_secret_secondary->expires = jiffy
+					+ TCP_SECRET_1MSL
+					+ (0x0f & tcp_cookie_work(bakery, 0));
+			} else {
+				tcp_secret_secondary->expires = jiffy
+					+ TCP_SECRET_LIFE
+					+ (0xff & tcp_cookie_work(bakery, 1));
+				tcp_secret_primary->expires = jiffy
+					+ TCP_SECRET_2MSL
+					+ (0x1f & tcp_cookie_work(bakery, 2));
+			}
+			memcpy(&tcp_secret_secondary->secrets[0],
+			       bakery, COOKIE_WORKSPACE_WORDS);
+
+			rcu_assign_pointer(tcp_secret_generating,
+					   tcp_secret_secondary);
+			rcu_assign_pointer(tcp_secret_retiring,
+					   tcp_secret_primary);
+			/*
+			 * Neither call_rcu() nor synchronize_rcu() needed.
+			 * Retiring data is not freed.  It is replaced after
+			 * further (locked) pointer updates, and a quiet time
+			 * (minimum 1MSL, maximum LIFE - 2MSL).
+			 */
+		}
+		spin_unlock_bh(&tcp_secret_locker);
+	} else {
+		rcu_read_lock_bh();
+		memcpy(bakery,
+		       &rcu_dereference(tcp_secret_generating)->secrets[0],
+		       COOKIE_WORKSPACE_WORDS);
+		rcu_read_unlock_bh();
+	}
+	return 0;
+}
+EXPORT_SYMBOL(tcp_cookie_generator);
+
 void tcp_done(struct sock *sk)
 {
 	if (sk->sk_state == TCP_SYN_SENT || sk->sk_state == TCP_SYN_RECV)
@@ -2881,6 +3141,7 @@
 	struct sk_buff *skb = NULL;
 	unsigned long nr_pages, limit;
 	int order, i, max_share;
+	unsigned long jiffy = jiffies;
 
 	BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb));
 
@@ -2903,11 +3164,10 @@
 					(totalram_pages >= 128 * 1024) ?
 					13 : 15,
 					0,
-					&tcp_hashinfo.ehash_size,
 					NULL,
+					&tcp_hashinfo.ehash_mask,
 					thash_entries ? 0 : 512 * 1024);
-	tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size;
-	for (i = 0; i < tcp_hashinfo.ehash_size; i++) {
+	for (i = 0; i <= tcp_hashinfo.ehash_mask; i++) {
 		INIT_HLIST_NULLS_HEAD(&tcp_hashinfo.ehash[i].chain, i);
 		INIT_HLIST_NULLS_HEAD(&tcp_hashinfo.ehash[i].twchain, i);
 	}
@@ -2916,7 +3176,7 @@
 	tcp_hashinfo.bhash =
 		alloc_large_system_hash("TCP bind",
 					sizeof(struct inet_bind_hashbucket),
-					tcp_hashinfo.ehash_size,
+					tcp_hashinfo.ehash_mask + 1,
 					(totalram_pages >= 128 * 1024) ?
 					13 : 15,
 					0,
@@ -2971,10 +3231,19 @@
 	sysctl_tcp_rmem[2] = max(87380, max_share);
 
 	printk(KERN_INFO "TCP: Hash tables configured "
-	       "(established %d bind %d)\n",
-	       tcp_hashinfo.ehash_size, tcp_hashinfo.bhash_size);
+	       "(established %u bind %u)\n",
+	       tcp_hashinfo.ehash_mask + 1, tcp_hashinfo.bhash_size);
 
 	tcp_register_congestion_control(&tcp_reno);
+
+	memset(&tcp_secret_one.secrets[0], 0, sizeof(tcp_secret_one.secrets));
+	memset(&tcp_secret_two.secrets[0], 0, sizeof(tcp_secret_two.secrets));
+	tcp_secret_one.expires = jiffy; /* past due */
+	tcp_secret_two.expires = jiffy; /* past due */
+	tcp_secret_generating = &tcp_secret_one;
+	tcp_secret_primary = &tcp_secret_one;
+	tcp_secret_retiring = &tcp_secret_two;
+	tcp_secret_secondary = &tcp_secret_two;
 }
 
 EXPORT_SYMBOL(tcp_close);
diff --git a/net/ipv4/tcp_diag.c b/net/ipv4/tcp_diag.c
index fcbcd4f..939edb3 100644
--- a/net/ipv4/tcp_diag.c
+++ b/net/ipv4/tcp_diag.c
@@ -27,7 +27,7 @@
 		r->idiag_rqueue = sk->sk_ack_backlog;
 		r->idiag_wqueue = sk->sk_max_ack_backlog;
 	} else {
-		r->idiag_rqueue = tp->rcv_nxt - tp->copied_seq;
+		r->idiag_rqueue = max_t(int, tp->rcv_nxt - tp->copied_seq, 0);
 		r->idiag_wqueue = tp->write_seq - tp->snd_una;
 	}
 	if (info != NULL)
diff --git a/net/ipv4/tcp_htcp.c b/net/ipv4/tcp_htcp.c
index 26d5c7f..7c94a49 100644
--- a/net/ipv4/tcp_htcp.c
+++ b/net/ipv4/tcp_htcp.c
@@ -92,8 +92,8 @@
 	if (icsk->icsk_ca_state == TCP_CA_Open) {
 		if (ca->maxRTT < ca->minRTT)
 			ca->maxRTT = ca->minRTT;
-		if (ca->maxRTT < srtt
-		    && srtt <= ca->maxRTT + msecs_to_jiffies(20))
+		if (ca->maxRTT < srtt &&
+		    srtt <= ca->maxRTT + msecs_to_jiffies(20))
 			ca->maxRTT = srtt;
 	}
 }
@@ -123,9 +123,9 @@
 
 	ca->packetcount += pkts_acked;
 
-	if (ca->packetcount >= tp->snd_cwnd - (ca->alpha >> 7 ? : 1)
-	    && now - ca->lasttime >= ca->minRTT
-	    && ca->minRTT > 0) {
+	if (ca->packetcount >= tp->snd_cwnd - (ca->alpha >> 7 ? : 1) &&
+	    now - ca->lasttime >= ca->minRTT &&
+	    ca->minRTT > 0) {
 		__u32 cur_Bi = ca->packetcount * HZ / (now - ca->lasttime);
 
 		if (htcp_ccount(ca) <= 3) {
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index d86784b..57ae96a 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -140,7 +140,7 @@
 		 * "len" is invariant segment length, including TCP header.
 		 */
 		len += skb->data - skb_transport_header(skb);
-		if (len >= TCP_MIN_RCVMSS + sizeof(struct tcphdr) ||
+		if (len >= TCP_MSS_DEFAULT + sizeof(struct tcphdr) ||
 		    /* If PSH is not set, packet should be
 		     * full sized, provided peer TCP is not badly broken.
 		     * This observation (if it is correct 8)) allows
@@ -411,7 +411,7 @@
 	unsigned int hint = min_t(unsigned int, tp->advmss, tp->mss_cache);
 
 	hint = min(hint, tp->rcv_wnd / 2);
-	hint = min(hint, TCP_MIN_RCVMSS);
+	hint = min(hint, TCP_MSS_DEFAULT);
 	hint = max(hint, TCP_MIN_MSS);
 
 	inet_csk(sk)->icsk_ack.rcv_mss = hint;
@@ -2300,7 +2300,7 @@
  * they differ. Since neither occurs due to loss, TCP should really
  * ignore them.
  */
-static inline int tcp_dupack_heurestics(struct tcp_sock *tp)
+static inline int tcp_dupack_heuristics(struct tcp_sock *tp)
 {
 	return tcp_is_fack(tp) ? tp->fackets_out : tp->sacked_out + 1;
 }
@@ -2425,7 +2425,7 @@
 		return 1;
 
 	/* Not-A-Trick#2 : Classic rule... */
-	if (tcp_dupack_heurestics(tp) > tp->reordering)
+	if (tcp_dupack_heuristics(tp) > tp->reordering)
 		return 1;
 
 	/* Trick#3 : when we use RFC2988 timer restart, fast
@@ -3698,7 +3698,7 @@
  * the fast version below fails.
  */
 void tcp_parse_options(struct sk_buff *skb, struct tcp_options_received *opt_rx,
-		       int estab)
+		       u8 **hvpp, int estab,  struct dst_entry *dst)
 {
 	unsigned char *ptr;
 	struct tcphdr *th = tcp_hdr(skb);
@@ -3737,7 +3737,8 @@
 				break;
 			case TCPOPT_WINDOW:
 				if (opsize == TCPOLEN_WINDOW && th->syn &&
-				    !estab && sysctl_tcp_window_scaling) {
+				    !estab && sysctl_tcp_window_scaling &&
+				    !dst_feature(dst, RTAX_FEATURE_NO_WSCALE)) {
 					__u8 snd_wscale = *(__u8 *)ptr;
 					opt_rx->wscale_ok = 1;
 					if (snd_wscale > 14) {
@@ -3753,7 +3754,8 @@
 			case TCPOPT_TIMESTAMP:
 				if ((opsize == TCPOLEN_TIMESTAMP) &&
 				    ((estab && opt_rx->tstamp_ok) ||
-				     (!estab && sysctl_tcp_timestamps))) {
+				     (!estab && sysctl_tcp_timestamps &&
+				      !dst_feature(dst, RTAX_FEATURE_NO_TSTAMP)))) {
 					opt_rx->saw_tstamp = 1;
 					opt_rx->rcv_tsval = get_unaligned_be32(ptr);
 					opt_rx->rcv_tsecr = get_unaligned_be32(ptr + 4);
@@ -3761,7 +3763,8 @@
 				break;
 			case TCPOPT_SACK_PERM:
 				if (opsize == TCPOLEN_SACK_PERM && th->syn &&
-				    !estab && sysctl_tcp_sack) {
+				    !estab && sysctl_tcp_sack &&
+				    !dst_feature(dst, RTAX_FEATURE_NO_SACK)) {
 					opt_rx->sack_ok = 1;
 					tcp_sack_reset(opt_rx);
 				}
@@ -3782,7 +3785,30 @@
 				 */
 				break;
 #endif
-			}
+			case TCPOPT_COOKIE:
+				/* This option is variable length.
+				 */
+				switch (opsize) {
+				case TCPOLEN_COOKIE_BASE:
+					/* not yet implemented */
+					break;
+				case TCPOLEN_COOKIE_PAIR:
+					/* not yet implemented */
+					break;
+				case TCPOLEN_COOKIE_MIN+0:
+				case TCPOLEN_COOKIE_MIN+2:
+				case TCPOLEN_COOKIE_MIN+4:
+				case TCPOLEN_COOKIE_MIN+6:
+				case TCPOLEN_COOKIE_MAX:
+					/* 16-bit multiple */
+					opt_rx->cookie_plus = opsize;
+					*hvpp = ptr;
+				default:
+					/* ignore option */
+					break;
+				};
+				break;
+			};
 
 			ptr += opsize-2;
 			length -= opsize;
@@ -3810,17 +3836,20 @@
  * If it is wrong it falls back on tcp_parse_options().
  */
 static int tcp_fast_parse_options(struct sk_buff *skb, struct tcphdr *th,
-				  struct tcp_sock *tp)
+				  struct tcp_sock *tp, u8 **hvpp)
 {
-	if (th->doff == sizeof(struct tcphdr) >> 2) {
+	/* In the spirit of fast parsing, compare doff directly to constant
+	 * values.  Because equality is used, short doff can be ignored here.
+	 */
+	if (th->doff == (sizeof(*th) / 4)) {
 		tp->rx_opt.saw_tstamp = 0;
 		return 0;
 	} else if (tp->rx_opt.tstamp_ok &&
-		   th->doff == (sizeof(struct tcphdr)>>2)+(TCPOLEN_TSTAMP_ALIGNED>>2)) {
+		   th->doff == ((sizeof(*th) + TCPOLEN_TSTAMP_ALIGNED) / 4)) {
 		if (tcp_parse_aligned_timestamp(tp, th))
 			return 1;
 	}
-	tcp_parse_options(skb, &tp->rx_opt, 1);
+	tcp_parse_options(skb, &tp->rx_opt, hvpp, 1, NULL);
 	return 1;
 }
 
@@ -4075,8 +4104,10 @@
 static void tcp_dsack_set(struct sock *sk, u32 seq, u32 end_seq)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
+	struct dst_entry *dst = __sk_dst_get(sk);
 
-	if (tcp_is_sack(tp) && sysctl_tcp_dsack) {
+	if (tcp_is_sack(tp) && sysctl_tcp_dsack &&
+	    !dst_feature(dst, RTAX_FEATURE_NO_DSACK)) {
 		int mib_idx;
 
 		if (before(seq, tp->rcv_nxt))
@@ -4105,13 +4136,15 @@
 static void tcp_send_dupack(struct sock *sk, struct sk_buff *skb)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
+	struct dst_entry *dst = __sk_dst_get(sk);
 
 	if (TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb)->seq &&
 	    before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
 		tcp_enter_quickack_mode(sk);
 
-		if (tcp_is_sack(tp) && sysctl_tcp_dsack) {
+		if (tcp_is_sack(tp) && sysctl_tcp_dsack &&
+		    !dst_feature(dst, RTAX_FEATURE_NO_DSACK)) {
 			u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
 			if (after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt))
@@ -4845,11 +4878,11 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	    /* More than one full frame received... */
-	if (((tp->rcv_nxt - tp->rcv_wup) > inet_csk(sk)->icsk_ack.rcv_mss
+	if (((tp->rcv_nxt - tp->rcv_wup) > inet_csk(sk)->icsk_ack.rcv_mss &&
 	     /* ... and right edge of window advances far enough.
 	      * (tcp_recvmsg() will send ACK otherwise). Or...
 	      */
-	     && __tcp_select_window(sk) >= tp->rcv_wnd) ||
+	     __tcp_select_window(sk) >= tp->rcv_wnd) ||
 	    /* We ACK each frame or... */
 	    tcp_in_quickack_mode(sk) ||
 	    /* We have out of order data. */
@@ -5070,10 +5103,12 @@
 static int tcp_validate_incoming(struct sock *sk, struct sk_buff *skb,
 			      struct tcphdr *th, int syn_inerr)
 {
+	u8 *hash_location;
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	/* RFC1323: H1. Apply PAWS check first. */
-	if (tcp_fast_parse_options(skb, th, tp) && tp->rx_opt.saw_tstamp &&
+	if (tcp_fast_parse_options(skb, th, tp, &hash_location) &&
+	    tp->rx_opt.saw_tstamp &&
 	    tcp_paws_discard(sk, skb)) {
 		if (!th->rst) {
 			NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED);
@@ -5361,11 +5396,14 @@
 static int tcp_rcv_synsent_state_process(struct sock *sk, struct sk_buff *skb,
 					 struct tcphdr *th, unsigned len)
 {
-	struct tcp_sock *tp = tcp_sk(sk);
+	u8 *hash_location;
 	struct inet_connection_sock *icsk = inet_csk(sk);
+	struct tcp_sock *tp = tcp_sk(sk);
+	struct dst_entry *dst = __sk_dst_get(sk);
+	struct tcp_cookie_values *cvp = tp->cookie_values;
 	int saved_clamp = tp->rx_opt.mss_clamp;
 
-	tcp_parse_options(skb, &tp->rx_opt, 0);
+	tcp_parse_options(skb, &tp->rx_opt, &hash_location, 0, dst);
 
 	if (th->ack) {
 		/* rfc793:
@@ -5462,6 +5500,31 @@
 		 * Change state from SYN-SENT only after copied_seq
 		 * is initialized. */
 		tp->copied_seq = tp->rcv_nxt;
+
+		if (cvp != NULL &&
+		    cvp->cookie_pair_size > 0 &&
+		    tp->rx_opt.cookie_plus > 0) {
+			int cookie_size = tp->rx_opt.cookie_plus
+					- TCPOLEN_COOKIE_BASE;
+			int cookie_pair_size = cookie_size
+					     + cvp->cookie_desired;
+
+			/* A cookie extension option was sent and returned.
+			 * Note that each incoming SYNACK replaces the
+			 * Responder cookie.  The initial exchange is most
+			 * fragile, as protection against spoofing relies
+			 * entirely upon the sequence and timestamp (above).
+			 * This replacement strategy allows the correct pair to
+			 * pass through, while any others will be filtered via
+			 * Responder verification later.
+			 */
+			if (sizeof(cvp->cookie_pair) >= cookie_pair_size) {
+				memcpy(&cvp->cookie_pair[cvp->cookie_desired],
+				       hash_location, cookie_size);
+				cvp->cookie_pair_size = cookie_pair_size;
+			}
+		}
+
 		smp_mb();
 		tcp_set_state(sk, TCP_ESTABLISHED);
 
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 7cda24b..29002ab 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -165,10 +165,10 @@
 		nexthop = inet->opt->faddr;
 	}
 
-	tmp = ip_route_connect(&rt, nexthop, inet->saddr,
+	tmp = ip_route_connect(&rt, nexthop, inet->inet_saddr,
 			       RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
 			       IPPROTO_TCP,
-			       inet->sport, usin->sin_port, sk, 1);
+			       inet->inet_sport, usin->sin_port, sk, 1);
 	if (tmp < 0) {
 		if (tmp == -ENETUNREACH)
 			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
@@ -183,11 +183,11 @@
 	if (!inet->opt || !inet->opt->srr)
 		daddr = rt->rt_dst;
 
-	if (!inet->saddr)
-		inet->saddr = rt->rt_src;
-	inet->rcv_saddr = inet->saddr;
+	if (!inet->inet_saddr)
+		inet->inet_saddr = rt->rt_src;
+	inet->inet_rcv_saddr = inet->inet_saddr;
 
-	if (tp->rx_opt.ts_recent_stamp && inet->daddr != daddr) {
+	if (tp->rx_opt.ts_recent_stamp && inet->inet_daddr != daddr) {
 		/* Reset inherited state */
 		tp->rx_opt.ts_recent	   = 0;
 		tp->rx_opt.ts_recent_stamp = 0;
@@ -204,20 +204,20 @@
 		 * when trying new connection.
 		 */
 		if (peer != NULL &&
-		    peer->tcp_ts_stamp + TCP_PAWS_MSL >= get_seconds()) {
+		    (u32)get_seconds() - peer->tcp_ts_stamp <= TCP_PAWS_MSL) {
 			tp->rx_opt.ts_recent_stamp = peer->tcp_ts_stamp;
 			tp->rx_opt.ts_recent = peer->tcp_ts;
 		}
 	}
 
-	inet->dport = usin->sin_port;
-	inet->daddr = daddr;
+	inet->inet_dport = usin->sin_port;
+	inet->inet_daddr = daddr;
 
 	inet_csk(sk)->icsk_ext_hdr_len = 0;
 	if (inet->opt)
 		inet_csk(sk)->icsk_ext_hdr_len = inet->opt->optlen;
 
-	tp->rx_opt.mss_clamp = 536;
+	tp->rx_opt.mss_clamp = TCP_MSS_DEFAULT;
 
 	/* Socket identity is still unknown (sport may be zero).
 	 * However we set state to SYN-SENT and not releasing socket
@@ -230,7 +230,7 @@
 		goto failure;
 
 	err = ip_route_newports(&rt, IPPROTO_TCP,
-				inet->sport, inet->dport, sk);
+				inet->inet_sport, inet->inet_dport, sk);
 	if (err)
 		goto failure;
 
@@ -239,12 +239,12 @@
 	sk_setup_caps(sk, &rt->u.dst);
 
 	if (!tp->write_seq)
-		tp->write_seq = secure_tcp_sequence_number(inet->saddr,
-							   inet->daddr,
-							   inet->sport,
+		tp->write_seq = secure_tcp_sequence_number(inet->inet_saddr,
+							   inet->inet_daddr,
+							   inet->inet_sport,
 							   usin->sin_port);
 
-	inet->id = tp->write_seq ^ jiffies;
+	inet->inet_id = tp->write_seq ^ jiffies;
 
 	err = tcp_connect(sk);
 	rt = NULL;
@@ -261,7 +261,7 @@
 	tcp_set_state(sk, TCP_CLOSE);
 	ip_rt_put(rt);
 	sk->sk_route_caps = 0;
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	return err;
 }
 
@@ -520,12 +520,13 @@
 	struct tcphdr *th = tcp_hdr(skb);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		th->check = ~tcp_v4_check(len, inet->saddr,
-					  inet->daddr, 0);
+		th->check = ~tcp_v4_check(len, inet->inet_saddr,
+					  inet->inet_daddr, 0);
 		skb->csum_start = skb_transport_header(skb) - skb->head;
 		skb->csum_offset = offsetof(struct tcphdr, check);
 	} else {
-		th->check = tcp_v4_check(len, inet->saddr, inet->daddr,
+		th->check = tcp_v4_check(len, inet->inet_saddr,
+					 inet->inet_daddr,
 					 csum_partial(th,
 						      th->doff << 2,
 						      skb->csum));
@@ -741,8 +742,9 @@
  *	This still operates on a request_sock only, not on a big
  *	socket.
  */
-static int __tcp_v4_send_synack(struct sock *sk, struct request_sock *req,
-				struct dst_entry *dst)
+static int __tcp_v4_send_synack(struct sock *sk, struct dst_entry *dst,
+				struct request_sock *req,
+				struct request_values *rvp)
 {
 	const struct inet_request_sock *ireq = inet_rsk(req);
 	int err = -1;
@@ -752,7 +754,7 @@
 	if (!dst && (dst = inet_csk_route_req(sk, req)) == NULL)
 		return -1;
 
-	skb = tcp_make_synack(sk, dst, req);
+	skb = tcp_make_synack(sk, dst, req, rvp);
 
 	if (skb) {
 		struct tcphdr *th = tcp_hdr(skb);
@@ -773,9 +775,10 @@
 	return err;
 }
 
-static int tcp_v4_send_synack(struct sock *sk, struct request_sock *req)
+static int tcp_v4_send_synack(struct sock *sk, struct request_sock *req,
+			      struct request_values *rvp)
 {
-	return __tcp_v4_send_synack(sk, req, NULL);
+	return __tcp_v4_send_synack(sk, NULL, req, rvp);
 }
 
 /*
@@ -848,7 +851,7 @@
 struct tcp_md5sig_key *tcp_v4_md5_lookup(struct sock *sk,
 					 struct sock *addr_sk)
 {
-	return tcp_v4_md5_do_lookup(sk, inet_sk(addr_sk)->daddr);
+	return tcp_v4_md5_do_lookup(sk, inet_sk(addr_sk)->inet_daddr);
 }
 
 EXPORT_SYMBOL(tcp_v4_md5_lookup);
@@ -923,7 +926,7 @@
 static int tcp_v4_md5_add_func(struct sock *sk, struct sock *addr_sk,
 			       u8 *newkey, u8 newkeylen)
 {
-	return tcp_v4_md5_do_add(sk, inet_sk(addr_sk)->daddr,
+	return tcp_v4_md5_do_add(sk, inet_sk(addr_sk)->inet_daddr,
 				 newkey, newkeylen);
 }
 
@@ -1089,8 +1092,8 @@
 	__be32 saddr, daddr;
 
 	if (sk) {
-		saddr = inet_sk(sk)->saddr;
-		daddr = inet_sk(sk)->daddr;
+		saddr = inet_sk(sk)->inet_saddr;
+		daddr = inet_sk(sk)->inet_daddr;
 	} else if (req) {
 		saddr = inet_rsk(req)->loc_addr;
 		daddr = inet_rsk(req)->rmt_addr;
@@ -1210,13 +1213,16 @@
 
 int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 {
-	struct inet_request_sock *ireq;
+	struct tcp_extend_values tmp_ext;
 	struct tcp_options_received tmp_opt;
+	u8 *hash_location;
 	struct request_sock *req;
+	struct inet_request_sock *ireq;
+	struct tcp_sock *tp = tcp_sk(sk);
+	struct dst_entry *dst = NULL;
 	__be32 saddr = ip_hdr(skb)->saddr;
 	__be32 daddr = ip_hdr(skb)->daddr;
 	__u32 isn = TCP_SKB_CB(skb)->when;
-	struct dst_entry *dst = NULL;
 #ifdef CONFIG_SYN_COOKIES
 	int want_cookie = 0;
 #else
@@ -1256,28 +1262,66 @@
 	tcp_rsk(req)->af_specific = &tcp_request_sock_ipv4_ops;
 #endif
 
-	tcp_clear_options(&tmp_opt);
-	tmp_opt.mss_clamp = 536;
-	tmp_opt.user_mss  = tcp_sk(sk)->rx_opt.user_mss;
-
-	tcp_parse_options(skb, &tmp_opt, 0);
-
-	if (want_cookie && !tmp_opt.saw_tstamp)
-		tcp_clear_options(&tmp_opt);
-
-	tmp_opt.tstamp_ok = tmp_opt.saw_tstamp;
-
-	tcp_openreq_init(req, &tmp_opt, skb);
-
 	ireq = inet_rsk(req);
 	ireq->loc_addr = daddr;
 	ireq->rmt_addr = saddr;
 	ireq->no_srccheck = inet_sk(sk)->transparent;
 	ireq->opt = tcp_v4_save_options(sk, skb);
 
-	if (security_inet_conn_request(sk, skb, req))
+	dst = inet_csk_route_req(sk, req);
+	if(!dst)
 		goto drop_and_free;
 
+	tcp_clear_options(&tmp_opt);
+	tmp_opt.mss_clamp = TCP_MSS_DEFAULT;
+	tmp_opt.user_mss  = tp->rx_opt.user_mss;
+	tcp_parse_options(skb, &tmp_opt, &hash_location, 0, dst);
+
+	if (tmp_opt.cookie_plus > 0 &&
+	    tmp_opt.saw_tstamp &&
+	    !tp->rx_opt.cookie_out_never &&
+	    (sysctl_tcp_cookie_size > 0 ||
+	     (tp->cookie_values != NULL &&
+	      tp->cookie_values->cookie_desired > 0))) {
+		u8 *c;
+		u32 *mess = &tmp_ext.cookie_bakery[COOKIE_DIGEST_WORDS];
+		int l = tmp_opt.cookie_plus - TCPOLEN_COOKIE_BASE;
+
+		if (tcp_cookie_generator(&tmp_ext.cookie_bakery[0]) != 0)
+			goto drop_and_release;
+
+		/* Secret recipe starts with IP addresses */
+		*mess++ ^= daddr;
+		*mess++ ^= saddr;
+
+		/* plus variable length Initiator Cookie */
+		c = (u8 *)mess;
+		while (l-- > 0)
+			*c++ ^= *hash_location++;
+
+#ifdef CONFIG_SYN_COOKIES
+		want_cookie = 0;	/* not our kind of cookie */
+#endif
+		tmp_ext.cookie_out_never = 0; /* false */
+		tmp_ext.cookie_plus = tmp_opt.cookie_plus;
+	} else if (!tp->rx_opt.cookie_in_always) {
+		/* redundant indications, but ensure initialization. */
+		tmp_ext.cookie_out_never = 1; /* true */
+		tmp_ext.cookie_plus = 0;
+	} else {
+		goto drop_and_release;
+	}
+	tmp_ext.cookie_in_always = tp->rx_opt.cookie_in_always;
+
+	if (want_cookie && !tmp_opt.saw_tstamp)
+		tcp_clear_options(&tmp_opt);
+
+	tmp_opt.tstamp_ok = tmp_opt.saw_tstamp;
+	tcp_openreq_init(req, &tmp_opt, skb);
+
+	if (security_inet_conn_request(sk, skb, req))
+		goto drop_and_release;
+
 	if (!want_cookie)
 		TCP_ECN_create_request(req, tcp_hdr(skb));
 
@@ -1301,10 +1345,9 @@
 		 */
 		if (tmp_opt.saw_tstamp &&
 		    tcp_death_row.sysctl_tw_recycle &&
-		    (dst = inet_csk_route_req(sk, req)) != NULL &&
 		    (peer = rt_get_peer((struct rtable *)dst)) != NULL &&
 		    peer->v4daddr == saddr) {
-			if (get_seconds() < peer->tcp_ts_stamp + TCP_PAWS_MSL &&
+			if ((u32)get_seconds() - peer->tcp_ts_stamp < TCP_PAWS_MSL &&
 			    (s32)(peer->tcp_ts - req->ts_recent) >
 							TCP_PAWS_WINDOW) {
 				NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSPASSIVEREJECTED);
@@ -1333,7 +1376,9 @@
 	}
 	tcp_rsk(req)->snt_isn = isn;
 
-	if (__tcp_v4_send_synack(sk, req, dst) || want_cookie)
+	if (__tcp_v4_send_synack(sk, dst, req,
+				 (struct request_values *)&tmp_ext) ||
+	    want_cookie)
 		goto drop_and_free;
 
 	inet_csk_reqsk_queue_hash_add(sk, req, TCP_TIMEOUT_INIT);
@@ -1380,9 +1425,9 @@
 	newtp		      = tcp_sk(newsk);
 	newinet		      = inet_sk(newsk);
 	ireq		      = inet_rsk(req);
-	newinet->daddr	      = ireq->rmt_addr;
-	newinet->rcv_saddr    = ireq->loc_addr;
-	newinet->saddr	      = ireq->loc_addr;
+	newinet->inet_daddr   = ireq->rmt_addr;
+	newinet->inet_rcv_saddr = ireq->loc_addr;
+	newinet->inet_saddr	      = ireq->loc_addr;
 	newinet->opt	      = ireq->opt;
 	ireq->opt	      = NULL;
 	newinet->mc_index     = inet_iif(skb);
@@ -1390,7 +1435,7 @@
 	inet_csk(newsk)->icsk_ext_hdr_len = 0;
 	if (newinet->opt)
 		inet_csk(newsk)->icsk_ext_hdr_len = newinet->opt->optlen;
-	newinet->id = newtp->write_seq ^ jiffies;
+	newinet->inet_id = newtp->write_seq ^ jiffies;
 
 	tcp_mtup_init(newsk);
 	tcp_sync_mss(newsk, dst_mtu(dst));
@@ -1403,7 +1448,8 @@
 
 #ifdef CONFIG_TCP_MD5SIG
 	/* Copy over the MD5 key from the original socket */
-	if ((key = tcp_v4_md5_do_lookup(sk, newinet->daddr)) != NULL) {
+	key = tcp_v4_md5_do_lookup(sk, newinet->inet_daddr);
+	if (key != NULL) {
 		/*
 		 * We're using one, so create a matching key
 		 * on the newsk structure. If we fail to get
@@ -1412,7 +1458,7 @@
 		 */
 		char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
 		if (newkey != NULL)
-			tcp_v4_md5_do_add(newsk, newinet->daddr,
+			tcp_v4_md5_do_add(newsk, newinet->inet_daddr,
 					  newkey, key->keylen);
 		newsk->sk_route_caps &= ~NETIF_F_GSO_MASK;
 	}
@@ -1711,8 +1757,8 @@
 	struct inet_peer *peer = NULL;
 	int release_it = 0;
 
-	if (!rt || rt->rt_dst != inet->daddr) {
-		peer = inet_getpeer(inet->daddr, 1);
+	if (!rt || rt->rt_dst != inet->inet_daddr) {
+		peer = inet_getpeer(inet->inet_daddr, 1);
 		release_it = 1;
 	} else {
 		if (!rt->peer)
@@ -1722,9 +1768,9 @@
 
 	if (peer) {
 		if ((s32)(peer->tcp_ts - tp->rx_opt.ts_recent) <= 0 ||
-		    (peer->tcp_ts_stamp + TCP_PAWS_MSL < get_seconds() &&
-		     peer->tcp_ts_stamp <= tp->rx_opt.ts_recent_stamp)) {
-			peer->tcp_ts_stamp = tp->rx_opt.ts_recent_stamp;
+		    ((u32)get_seconds() - peer->tcp_ts_stamp > TCP_PAWS_MSL &&
+		     peer->tcp_ts_stamp <= (u32)tp->rx_opt.ts_recent_stamp)) {
+			peer->tcp_ts_stamp = (u32)tp->rx_opt.ts_recent_stamp;
 			peer->tcp_ts = tp->rx_opt.ts_recent;
 		}
 		if (release_it)
@@ -1743,9 +1789,9 @@
 		const struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
 
 		if ((s32)(peer->tcp_ts - tcptw->tw_ts_recent) <= 0 ||
-		    (peer->tcp_ts_stamp + TCP_PAWS_MSL < get_seconds() &&
-		     peer->tcp_ts_stamp <= tcptw->tw_ts_recent_stamp)) {
-			peer->tcp_ts_stamp = tcptw->tw_ts_recent_stamp;
+		    ((u32)get_seconds() - peer->tcp_ts_stamp > TCP_PAWS_MSL &&
+		     peer->tcp_ts_stamp <= (u32)tcptw->tw_ts_recent_stamp)) {
+			peer->tcp_ts_stamp = (u32)tcptw->tw_ts_recent_stamp;
 			peer->tcp_ts	   = tcptw->tw_ts_recent;
 		}
 		inet_putpeer(peer);
@@ -1810,7 +1856,7 @@
 	 */
 	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 	tp->snd_cwnd_clamp = ~0;
-	tp->mss_cache = 536;
+	tp->mss_cache = TCP_MSS_DEFAULT;
 
 	tp->reordering = sysctl_tcp_reordering;
 	icsk->icsk_ca_ops = &tcp_init_congestion_ops;
@@ -1826,6 +1872,19 @@
 	tp->af_specific = &tcp_sock_ipv4_specific;
 #endif
 
+	/* TCP Cookie Transactions */
+	if (sysctl_tcp_cookie_size > 0) {
+		/* Default, cookies without s_data_payload. */
+		tp->cookie_values =
+			kzalloc(sizeof(*tp->cookie_values),
+				sk->sk_allocation);
+		if (tp->cookie_values != NULL)
+			kref_init(&tp->cookie_values->kref);
+	}
+	/* Presumed zeroed, in order of appearance:
+	 *	cookie_in_always, cookie_out_never,
+	 *	s_data_constant, s_data_in, s_data_out
+	 */
 	sk->sk_sndbuf = sysctl_tcp_wmem[1];
 	sk->sk_rcvbuf = sysctl_tcp_rmem[1];
 
@@ -1879,6 +1938,13 @@
 		sk->sk_sndmsg_page = NULL;
 	}
 
+	/* TCP Cookie Transactions */
+	if (tp->cookie_values != NULL) {
+		kref_put(&tp->cookie_values->kref,
+			 tcp_cookie_values_release);
+		tp->cookie_values = NULL;
+	}
+
 	percpu_counter_dec(&tcp_sockets_allocated);
 }
 
@@ -2000,7 +2066,7 @@
 	struct net *net = seq_file_net(seq);
 	void *rc = NULL;
 
-	for (st->bucket = 0; st->bucket < tcp_hashinfo.ehash_size; ++st->bucket) {
+	for (st->bucket = 0; st->bucket <= tcp_hashinfo.ehash_mask; ++st->bucket) {
 		struct sock *sk;
 		struct hlist_nulls_node *node;
 		struct inet_timewait_sock *tw;
@@ -2061,10 +2127,10 @@
 		st->state = TCP_SEQ_STATE_ESTABLISHED;
 
 		/* Look for next non empty bucket */
-		while (++st->bucket < tcp_hashinfo.ehash_size &&
+		while (++st->bucket <= tcp_hashinfo.ehash_mask &&
 				empty_bucket(st))
 			;
-		if (st->bucket >= tcp_hashinfo.ehash_size)
+		if (st->bucket > tcp_hashinfo.ehash_mask)
 			return NULL;
 
 		spin_lock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
@@ -2225,7 +2291,7 @@
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %u %d %p%n",
 		i,
 		ireq->loc_addr,
-		ntohs(inet_sk(sk)->sport),
+		ntohs(inet_sk(sk)->inet_sport),
 		ireq->rmt_addr,
 		ntohs(ireq->rmt_port),
 		TCP_SYN_RECV,
@@ -2248,10 +2314,11 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 	const struct inet_connection_sock *icsk = inet_csk(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	__be32 dest = inet->daddr;
-	__be32 src = inet->rcv_saddr;
-	__u16 destp = ntohs(inet->dport);
-	__u16 srcp = ntohs(inet->sport);
+	__be32 dest = inet->inet_daddr;
+	__be32 src = inet->inet_rcv_saddr;
+	__u16 destp = ntohs(inet->inet_dport);
+	__u16 srcp = ntohs(inet->inet_sport);
+	int rx_queue;
 
 	if (icsk->icsk_pending == ICSK_TIME_RETRANS) {
 		timer_active	= 1;
@@ -2267,12 +2334,19 @@
 		timer_expires = jiffies;
 	}
 
+	if (sk->sk_state == TCP_LISTEN)
+		rx_queue = sk->sk_ack_backlog;
+	else
+		/*
+		 * because we dont lock socket, we might find a transient negative value
+		 */
+		rx_queue = max_t(int, tp->rcv_nxt - tp->copied_seq, 0);
+
 	seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX "
 			"%08X %5d %8d %lu %d %p %lu %lu %u %u %d%n",
 		i, src, srcp, dest, destp, sk->sk_state,
 		tp->write_seq - tp->snd_una,
-		sk->sk_state == TCP_LISTEN ? sk->sk_ack_backlog :
-					     (tp->rcv_nxt - tp->copied_seq),
+		rx_queue,
 		timer_active,
 		jiffies_to_clock_t(timer_expires - jiffies),
 		icsk->icsk_retransmits,
@@ -2463,12 +2537,17 @@
 static void __net_exit tcp_sk_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv4.tcp_sock);
-	inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET);
+}
+
+static void __net_exit tcp_sk_exit_batch(struct list_head *net_exit_list)
+{
+	inet_twsk_purge(&tcp_hashinfo, &tcp_death_row, AF_INET);
 }
 
 static struct pernet_operations __net_initdata tcp_sk_ops = {
-       .init = tcp_sk_init,
-       .exit = tcp_sk_exit,
+       .init	   = tcp_sk_init,
+       .exit	   = tcp_sk_exit,
+       .exit_batch = tcp_sk_exit_batch,
 };
 
 void __init tcp_v4_init(void)
diff --git a/net/ipv4/tcp_lp.c b/net/ipv4/tcp_lp.c
index ce3c41f..de87037 100644
--- a/net/ipv4/tcp_lp.c
+++ b/net/ipv4/tcp_lp.c
@@ -143,8 +143,8 @@
 		goto out;
 
 	/* we can't calc remote HZ with no different!! */
-	if (tp->rx_opt.rcv_tsval == lp->remote_ref_time
-	    || tp->rx_opt.rcv_tsecr == lp->local_ref_time)
+	if (tp->rx_opt.rcv_tsval == lp->remote_ref_time ||
+	    tp->rx_opt.rcv_tsecr == lp->local_ref_time)
 		goto out;
 
 	m = HZ * (tp->rx_opt.rcv_tsval -
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 4c03598..87accec 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -26,13 +26,7 @@
 #include <net/inet_common.h>
 #include <net/xfrm.h>
 
-#ifdef CONFIG_SYSCTL
-#define SYNC_INIT 0 /* let the user enable it */
-#else
-#define SYNC_INIT 1
-#endif
-
-int sysctl_tcp_syncookies __read_mostly = SYNC_INIT;
+int sysctl_tcp_syncookies __read_mostly = 1;
 EXPORT_SYMBOL(sysctl_tcp_syncookies);
 
 int sysctl_tcp_abort_on_overflow __read_mostly;
@@ -96,13 +90,14 @@
 tcp_timewait_state_process(struct inet_timewait_sock *tw, struct sk_buff *skb,
 			   const struct tcphdr *th)
 {
-	struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
 	struct tcp_options_received tmp_opt;
+	u8 *hash_location;
+	struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
 	int paws_reject = 0;
 
-	tmp_opt.saw_tstamp = 0;
 	if (th->doff > (sizeof(*th) >> 2) && tcptw->tw_ts_recent_stamp) {
-		tcp_parse_options(skb, &tmp_opt, 0);
+		tmp_opt.tstamp_ok = 1;
+		tcp_parse_options(skb, &tmp_opt, &hash_location, 1, NULL);
 
 		if (tmp_opt.saw_tstamp) {
 			tmp_opt.ts_recent	= tcptw->tw_ts_recent;
@@ -389,14 +384,43 @@
 		const struct inet_request_sock *ireq = inet_rsk(req);
 		struct tcp_request_sock *treq = tcp_rsk(req);
 		struct inet_connection_sock *newicsk = inet_csk(newsk);
-		struct tcp_sock *newtp;
+		struct tcp_sock *newtp = tcp_sk(newsk);
+		struct tcp_sock *oldtp = tcp_sk(sk);
+		struct tcp_cookie_values *oldcvp = oldtp->cookie_values;
+
+		/* TCP Cookie Transactions require space for the cookie pair,
+		 * as it differs for each connection.  There is no need to
+		 * copy any s_data_payload stored at the original socket.
+		 * Failure will prevent resuming the connection.
+		 *
+		 * Presumed copied, in order of appearance:
+		 *	cookie_in_always, cookie_out_never
+		 */
+		if (oldcvp != NULL) {
+			struct tcp_cookie_values *newcvp =
+				kzalloc(sizeof(*newtp->cookie_values),
+					GFP_ATOMIC);
+
+			if (newcvp != NULL) {
+				kref_init(&newcvp->kref);
+				newcvp->cookie_desired =
+						oldcvp->cookie_desired;
+				newtp->cookie_values = newcvp;
+			} else {
+				/* Not Yet Implemented */
+				newtp->cookie_values = NULL;
+			}
+		}
 
 		/* Now setup tcp_sock */
-		newtp = tcp_sk(newsk);
 		newtp->pred_flags = 0;
-		newtp->rcv_wup = newtp->copied_seq = newtp->rcv_nxt = treq->rcv_isn + 1;
-		newtp->snd_sml = newtp->snd_una = newtp->snd_nxt = treq->snt_isn + 1;
-		newtp->snd_up = treq->snt_isn + 1;
+
+		newtp->rcv_wup = newtp->copied_seq =
+		newtp->rcv_nxt = treq->rcv_isn + 1;
+
+		newtp->snd_sml = newtp->snd_una =
+		newtp->snd_nxt = newtp->snd_up =
+			treq->snt_isn + 1 + tcp_s_data_size(oldtp);
 
 		tcp_prequeue_init(newtp);
 
@@ -429,8 +453,8 @@
 		tcp_set_ca_state(newsk, TCP_CA_Open);
 		tcp_init_xmit_timers(newsk);
 		skb_queue_head_init(&newtp->out_of_order_queue);
-		newtp->write_seq = treq->snt_isn + 1;
-		newtp->pushed_seq = newtp->write_seq;
+		newtp->write_seq = newtp->pushed_seq =
+			treq->snt_isn + 1 + tcp_s_data_size(oldtp);
 
 		newtp->rx_opt.saw_tstamp = 0;
 
@@ -476,7 +500,7 @@
 		if (newtp->af_specific->md5_lookup(sk, newsk))
 			newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
 #endif
-		if (skb->len >= TCP_MIN_RCVMSS+newtp->tcp_header_len)
+		if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
 			newicsk->icsk_ack.last_seg_size = skb->len - newtp->tcp_header_len;
 		newtp->rx_opt.mss_clamp = req->mss;
 		TCP_ECN_openreq_child(newtp, req);
@@ -495,15 +519,16 @@
 			   struct request_sock *req,
 			   struct request_sock **prev)
 {
+	struct tcp_options_received tmp_opt;
+	u8 *hash_location;
+	struct sock *child;
 	const struct tcphdr *th = tcp_hdr(skb);
 	__be32 flg = tcp_flag_word(th) & (TCP_FLAG_RST|TCP_FLAG_SYN|TCP_FLAG_ACK);
 	int paws_reject = 0;
-	struct tcp_options_received tmp_opt;
-	struct sock *child;
 
-	tmp_opt.saw_tstamp = 0;
-	if (th->doff > (sizeof(struct tcphdr)>>2)) {
-		tcp_parse_options(skb, &tmp_opt, 0);
+	if ((th->doff > (sizeof(*th) >> 2)) && (req->ts_recent)) {
+		tmp_opt.tstamp_ok = 1;
+		tcp_parse_options(skb, &tmp_opt, &hash_location, 1, NULL);
 
 		if (tmp_opt.saw_tstamp) {
 			tmp_opt.ts_recent = req->ts_recent;
@@ -537,7 +562,7 @@
 		 * Enforce "SYN-ACK" according to figure 8, figure 6
 		 * of RFC793, fixed by RFC1122.
 		 */
-		req->rsk_ops->rtx_syn_ack(sk, req);
+		req->rsk_ops->rtx_syn_ack(sk, req, NULL);
 		return NULL;
 	}
 
@@ -596,7 +621,8 @@
 	 * Invalid ACK: reset will be sent by listening socket
 	 */
 	if ((flg & TCP_FLAG_ACK) &&
-	    (TCP_SKB_CB(skb)->ack_seq != tcp_rsk(req)->snt_isn + 1))
+	    (TCP_SKB_CB(skb)->ack_seq !=
+	     tcp_rsk(req)->snt_isn + 1 + tcp_s_data_size(tcp_sk(sk))))
 		return sk;
 
 	/* Also, it would be not so bad idea to check rcv_tsecr, which
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index fcd278a..93316a9 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -59,6 +59,10 @@
 /* By default, RFC2861 behavior.  */
 int sysctl_tcp_slow_start_after_idle __read_mostly = 1;
 
+int sysctl_tcp_cookie_size __read_mostly = 0; /* TCP_COOKIE_MAX */
+EXPORT_SYMBOL_GPL(sysctl_tcp_cookie_size);
+
+
 /* Account for new data that has been sent to the network. */
 static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
 {
@@ -362,15 +366,45 @@
 #define OPTION_TS		(1 << 1)
 #define OPTION_MD5		(1 << 2)
 #define OPTION_WSCALE		(1 << 3)
+#define OPTION_COOKIE_EXTENSION	(1 << 4)
 
 struct tcp_out_options {
 	u8 options;		/* bit field of OPTION_* */
 	u8 ws;			/* window scale, 0 to disable */
 	u8 num_sack_blocks;	/* number of SACK blocks to include */
+	u8 hash_size;		/* bytes in hash_location */
 	u16 mss;		/* 0 to disable */
 	__u32 tsval, tsecr;	/* need to include OPTION_TS */
+	__u8 *hash_location;	/* temporary pointer, overloaded */
 };
 
+/* The sysctl int routines are generic, so check consistency here.
+ */
+static u8 tcp_cookie_size_check(u8 desired)
+{
+	if (desired > 0) {
+		/* previously specified */
+		return desired;
+	}
+	if (sysctl_tcp_cookie_size <= 0) {
+		/* no default specified */
+		return 0;
+	}
+	if (sysctl_tcp_cookie_size <= TCP_COOKIE_MIN) {
+		/* value too small, specify minimum */
+		return TCP_COOKIE_MIN;
+	}
+	if (sysctl_tcp_cookie_size >= TCP_COOKIE_MAX) {
+		/* value too large, specify maximum */
+		return TCP_COOKIE_MAX;
+	}
+	if (0x1 & sysctl_tcp_cookie_size) {
+		/* 8-bit multiple, illegal, fix it */
+		return (u8)(sysctl_tcp_cookie_size + 0x1);
+	}
+	return (u8)sysctl_tcp_cookie_size;
+}
+
 /* Write previously computed TCP options to the packet.
  *
  * Beware: Something in the Internet is very sensitive to the ordering of
@@ -385,17 +419,34 @@
  * (but it may well be that other scenarios fail similarly).
  */
 static void tcp_options_write(__be32 *ptr, struct tcp_sock *tp,
-			      const struct tcp_out_options *opts,
-			      __u8 **md5_hash) {
-	if (unlikely(OPTION_MD5 & opts->options)) {
-		*ptr++ = htonl((TCPOPT_NOP << 24) |
-			       (TCPOPT_NOP << 16) |
-			       (TCPOPT_MD5SIG << 8) |
-			       TCPOLEN_MD5SIG);
-		*md5_hash = (__u8 *)ptr;
+			      struct tcp_out_options *opts)
+{
+	u8 options = opts->options;	/* mungable copy */
+
+	/* Having both authentication and cookies for security is redundant,
+	 * and there's certainly not enough room.  Instead, the cookie-less
+	 * extension variant is proposed.
+	 *
+	 * Consider the pessimal case with authentication.  The options
+	 * could look like:
+	 *   COOKIE|MD5(20) + MSS(4) + SACK|TS(12) + WSCALE(4) == 40
+	 */
+	if (unlikely(OPTION_MD5 & options)) {
+		if (unlikely(OPTION_COOKIE_EXTENSION & options)) {
+			*ptr++ = htonl((TCPOPT_COOKIE << 24) |
+				       (TCPOLEN_COOKIE_BASE << 16) |
+				       (TCPOPT_MD5SIG << 8) |
+				       TCPOLEN_MD5SIG);
+		} else {
+			*ptr++ = htonl((TCPOPT_NOP << 24) |
+				       (TCPOPT_NOP << 16) |
+				       (TCPOPT_MD5SIG << 8) |
+				       TCPOLEN_MD5SIG);
+		}
+		options &= ~OPTION_COOKIE_EXTENSION;
+		/* overload cookie hash location */
+		opts->hash_location = (__u8 *)ptr;
 		ptr += 4;
-	} else {
-		*md5_hash = NULL;
 	}
 
 	if (unlikely(opts->mss)) {
@@ -404,12 +455,13 @@
 			       opts->mss);
 	}
 
-	if (likely(OPTION_TS & opts->options)) {
-		if (unlikely(OPTION_SACK_ADVERTISE & opts->options)) {
+	if (likely(OPTION_TS & options)) {
+		if (unlikely(OPTION_SACK_ADVERTISE & options)) {
 			*ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
 				       (TCPOLEN_SACK_PERM << 16) |
 				       (TCPOPT_TIMESTAMP << 8) |
 				       TCPOLEN_TIMESTAMP);
+			options &= ~OPTION_SACK_ADVERTISE;
 		} else {
 			*ptr++ = htonl((TCPOPT_NOP << 24) |
 				       (TCPOPT_NOP << 16) |
@@ -420,15 +472,52 @@
 		*ptr++ = htonl(opts->tsecr);
 	}
 
-	if (unlikely(OPTION_SACK_ADVERTISE & opts->options &&
-		     !(OPTION_TS & opts->options))) {
+	/* Specification requires after timestamp, so do it now.
+	 *
+	 * Consider the pessimal case without authentication.  The options
+	 * could look like:
+	 *   MSS(4) + SACK|TS(12) + COOKIE(20) + WSCALE(4) == 40
+	 */
+	if (unlikely(OPTION_COOKIE_EXTENSION & options)) {
+		__u8 *cookie_copy = opts->hash_location;
+		u8 cookie_size = opts->hash_size;
+
+		/* 8-bit multiple handled in tcp_cookie_size_check() above,
+		 * and elsewhere.
+		 */
+		if (0x2 & cookie_size) {
+			__u8 *p = (__u8 *)ptr;
+
+			/* 16-bit multiple */
+			*p++ = TCPOPT_COOKIE;
+			*p++ = TCPOLEN_COOKIE_BASE + cookie_size;
+			*p++ = *cookie_copy++;
+			*p++ = *cookie_copy++;
+			ptr++;
+			cookie_size -= 2;
+		} else {
+			/* 32-bit multiple */
+			*ptr++ = htonl(((TCPOPT_NOP << 24) |
+					(TCPOPT_NOP << 16) |
+					(TCPOPT_COOKIE << 8) |
+					TCPOLEN_COOKIE_BASE) +
+				       cookie_size);
+		}
+
+		if (cookie_size > 0) {
+			memcpy(ptr, cookie_copy, cookie_size);
+			ptr += (cookie_size / 4);
+		}
+	}
+
+	if (unlikely(OPTION_SACK_ADVERTISE & options)) {
 		*ptr++ = htonl((TCPOPT_NOP << 24) |
 			       (TCPOPT_NOP << 16) |
 			       (TCPOPT_SACK_PERM << 8) |
 			       TCPOLEN_SACK_PERM);
 	}
 
-	if (unlikely(OPTION_WSCALE & opts->options)) {
+	if (unlikely(OPTION_WSCALE & options)) {
 		*ptr++ = htonl((TCPOPT_NOP << 24) |
 			       (TCPOPT_WINDOW << 16) |
 			       (TCPOLEN_WINDOW << 8) |
@@ -463,13 +552,18 @@
 				struct tcp_out_options *opts,
 				struct tcp_md5sig_key **md5) {
 	struct tcp_sock *tp = tcp_sk(sk);
-	unsigned size = 0;
+	struct tcp_cookie_values *cvp = tp->cookie_values;
+	struct dst_entry *dst = __sk_dst_get(sk);
+	unsigned remaining = MAX_TCP_OPTION_SPACE;
+	u8 cookie_size = (!tp->rx_opt.cookie_out_never && cvp != NULL) ?
+			 tcp_cookie_size_check(cvp->cookie_desired) :
+			 0;
 
 #ifdef CONFIG_TCP_MD5SIG
 	*md5 = tp->af_specific->md5_lookup(sk, sk);
 	if (*md5) {
 		opts->options |= OPTION_MD5;
-		size += TCPOLEN_MD5SIG_ALIGNED;
+		remaining -= TCPOLEN_MD5SIG_ALIGNED;
 	}
 #else
 	*md5 = NULL;
@@ -485,26 +579,76 @@
 	 * SACKs don't matter, we never delay an ACK when we have any of those
 	 * going out.  */
 	opts->mss = tcp_advertise_mss(sk);
-	size += TCPOLEN_MSS_ALIGNED;
+	remaining -= TCPOLEN_MSS_ALIGNED;
 
-	if (likely(sysctl_tcp_timestamps && *md5 == NULL)) {
+	if (likely(sysctl_tcp_timestamps &&
+		   !dst_feature(dst, RTAX_FEATURE_NO_TSTAMP) &&
+		   *md5 == NULL)) {
 		opts->options |= OPTION_TS;
 		opts->tsval = TCP_SKB_CB(skb)->when;
 		opts->tsecr = tp->rx_opt.ts_recent;
-		size += TCPOLEN_TSTAMP_ALIGNED;
+		remaining -= TCPOLEN_TSTAMP_ALIGNED;
 	}
-	if (likely(sysctl_tcp_window_scaling)) {
+	if (likely(sysctl_tcp_window_scaling &&
+		   !dst_feature(dst, RTAX_FEATURE_NO_WSCALE))) {
 		opts->ws = tp->rx_opt.rcv_wscale;
 		opts->options |= OPTION_WSCALE;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		remaining -= TCPOLEN_WSCALE_ALIGNED;
 	}
-	if (likely(sysctl_tcp_sack)) {
+	if (likely(sysctl_tcp_sack &&
+		   !dst_feature(dst, RTAX_FEATURE_NO_SACK))) {
 		opts->options |= OPTION_SACK_ADVERTISE;
 		if (unlikely(!(OPTION_TS & opts->options)))
-			size += TCPOLEN_SACKPERM_ALIGNED;
+			remaining -= TCPOLEN_SACKPERM_ALIGNED;
 	}
 
-	return size;
+	/* Note that timestamps are required by the specification.
+	 *
+	 * Odd numbers of bytes are prohibited by the specification, ensuring
+	 * that the cookie is 16-bit aligned, and the resulting cookie pair is
+	 * 32-bit aligned.
+	 */
+	if (*md5 == NULL &&
+	    (OPTION_TS & opts->options) &&
+	    cookie_size > 0) {
+		int need = TCPOLEN_COOKIE_BASE + cookie_size;
+
+		if (0x2 & need) {
+			/* 32-bit multiple */
+			need += 2; /* NOPs */
+
+			if (need > remaining) {
+				/* try shrinking cookie to fit */
+				cookie_size -= 2;
+				need -= 4;
+			}
+		}
+		while (need > remaining && TCP_COOKIE_MIN <= cookie_size) {
+			cookie_size -= 4;
+			need -= 4;
+		}
+		if (TCP_COOKIE_MIN <= cookie_size) {
+			opts->options |= OPTION_COOKIE_EXTENSION;
+			opts->hash_location = (__u8 *)&cvp->cookie_pair[0];
+			opts->hash_size = cookie_size;
+
+			/* Remember for future incarnations. */
+			cvp->cookie_desired = cookie_size;
+
+			if (cvp->cookie_desired != cvp->cookie_pair_size) {
+				/* Currently use random bytes as a nonce,
+				 * assuming these are completely unpredictable
+				 * by hostile users of the same system.
+				 */
+				get_random_bytes(&cvp->cookie_pair[0],
+						 cookie_size);
+				cvp->cookie_pair_size = cookie_size;
+			}
+
+			remaining -= need;
+		}
+	}
+	return MAX_TCP_OPTION_SPACE - remaining;
 }
 
 /* Set up TCP options for SYN-ACKs. */
@@ -512,48 +656,77 @@
 				   struct request_sock *req,
 				   unsigned mss, struct sk_buff *skb,
 				   struct tcp_out_options *opts,
-				   struct tcp_md5sig_key **md5) {
-	unsigned size = 0;
+				   struct tcp_md5sig_key **md5,
+				   struct tcp_extend_values *xvp)
+{
 	struct inet_request_sock *ireq = inet_rsk(req);
-	char doing_ts;
+	unsigned remaining = MAX_TCP_OPTION_SPACE;
+	u8 cookie_plus = (xvp != NULL && !xvp->cookie_out_never) ?
+			 xvp->cookie_plus :
+			 0;
+	bool doing_ts = ireq->tstamp_ok;
 
 #ifdef CONFIG_TCP_MD5SIG
 	*md5 = tcp_rsk(req)->af_specific->md5_lookup(sk, req);
 	if (*md5) {
 		opts->options |= OPTION_MD5;
-		size += TCPOLEN_MD5SIG_ALIGNED;
+		remaining -= TCPOLEN_MD5SIG_ALIGNED;
+
+		/* We can't fit any SACK blocks in a packet with MD5 + TS
+		 * options. There was discussion about disabling SACK
+		 * rather than TS in order to fit in better with old,
+		 * buggy kernels, but that was deemed to be unnecessary.
+		 */
+		doing_ts &= !ireq->sack_ok;
 	}
 #else
 	*md5 = NULL;
 #endif
 
-	/* we can't fit any SACK blocks in a packet with MD5 + TS
-	   options. There was discussion about disabling SACK rather than TS in
-	   order to fit in better with old, buggy kernels, but that was deemed
-	   to be unnecessary. */
-	doing_ts = ireq->tstamp_ok && !(*md5 && ireq->sack_ok);
-
+	/* We always send an MSS option. */
 	opts->mss = mss;
-	size += TCPOLEN_MSS_ALIGNED;
+	remaining -= TCPOLEN_MSS_ALIGNED;
 
 	if (likely(ireq->wscale_ok)) {
 		opts->ws = ireq->rcv_wscale;
 		opts->options |= OPTION_WSCALE;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		remaining -= TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(doing_ts)) {
 		opts->options |= OPTION_TS;
 		opts->tsval = TCP_SKB_CB(skb)->when;
 		opts->tsecr = req->ts_recent;
-		size += TCPOLEN_TSTAMP_ALIGNED;
+		remaining -= TCPOLEN_TSTAMP_ALIGNED;
 	}
 	if (likely(ireq->sack_ok)) {
 		opts->options |= OPTION_SACK_ADVERTISE;
 		if (unlikely(!doing_ts))
-			size += TCPOLEN_SACKPERM_ALIGNED;
+			remaining -= TCPOLEN_SACKPERM_ALIGNED;
 	}
 
-	return size;
+	/* Similar rationale to tcp_syn_options() applies here, too.
+	 * If the <SYN> options fit, the same options should fit now!
+	 */
+	if (*md5 == NULL &&
+	    doing_ts &&
+	    cookie_plus > TCPOLEN_COOKIE_BASE) {
+		int need = cookie_plus; /* has TCPOLEN_COOKIE_BASE */
+
+		if (0x2 & need) {
+			/* 32-bit multiple */
+			need += 2; /* NOPs */
+		}
+		if (need <= remaining) {
+			opts->options |= OPTION_COOKIE_EXTENSION;
+			opts->hash_size = cookie_plus - TCPOLEN_COOKIE_BASE;
+			remaining -= need;
+		} else {
+			/* There's no error return, so flag it. */
+			xvp->cookie_out_never = 1; /* true */
+			opts->hash_size = 0;
+		}
+	}
+	return MAX_TCP_OPTION_SPACE - remaining;
 }
 
 /* Compute TCP options for ESTABLISHED sockets. This is not the
@@ -619,7 +792,6 @@
 	struct tcp_out_options opts;
 	unsigned tcp_options_size, tcp_header_size;
 	struct tcp_md5sig_key *md5;
-	__u8 *md5_hash_location;
 	struct tcphdr *th;
 	int err;
 
@@ -661,8 +833,8 @@
 
 	/* Build TCP header and checksum it. */
 	th = tcp_hdr(skb);
-	th->source		= inet->sport;
-	th->dest		= inet->dport;
+	th->source		= inet->inet_sport;
+	th->dest		= inet->inet_dport;
 	th->seq			= htonl(tcb->seq);
 	th->ack_seq		= htonl(tp->rcv_nxt);
 	*(((__be16 *)th) + 6)	= htons(((tcp_header_size >> 2) << 12) |
@@ -690,7 +862,7 @@
 		}
 	}
 
-	tcp_options_write((__be32 *)(th + 1), tp, &opts, &md5_hash_location);
+	tcp_options_write((__be32 *)(th + 1), tp, &opts);
 	if (likely((tcb->flags & TCPCB_FLAG_SYN) == 0))
 		TCP_ECN_send(sk, skb, tcp_header_size);
 
@@ -698,7 +870,7 @@
 	/* Calculate the MD5 hash, as we have all we need now */
 	if (md5) {
 		sk->sk_route_caps &= ~NETIF_F_GSO_MASK;
-		tp->af_specific->calc_md5_hash(md5_hash_location,
+		tp->af_specific->calc_md5_hash(opts.hash_location,
 					       md5, sk, NULL, skb);
 	}
 #endif
@@ -1918,8 +2090,8 @@
 	 * case, when window is shrunk to zero. In this case
 	 * our retransmit serves as a zero window probe.
 	 */
-	if (!before(TCP_SKB_CB(skb)->seq, tcp_wnd_end(tp))
-	    && TCP_SKB_CB(skb)->seq != tp->snd_una)
+	if (!before(TCP_SKB_CB(skb)->seq, tcp_wnd_end(tp)) &&
+	    TCP_SKB_CB(skb)->seq != tp->snd_una)
 		return -EAGAIN;
 
 	if (skb->len > cur_mss) {
@@ -2219,16 +2391,17 @@
 
 /* Prepare a SYN-ACK. */
 struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
-				struct request_sock *req)
+				struct request_sock *req,
+				struct request_values *rvp)
 {
+	struct tcp_out_options opts;
+	struct tcp_extend_values *xvp = tcp_xv(rvp);
 	struct inet_request_sock *ireq = inet_rsk(req);
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcphdr *th;
-	int tcp_header_size;
-	struct tcp_out_options opts;
 	struct sk_buff *skb;
 	struct tcp_md5sig_key *md5;
-	__u8 *md5_hash_location;
+	int tcp_header_size;
 	int mss;
 
 	skb = sock_wmalloc(sk, MAX_TCP_HEADER + 15, 1, GFP_ATOMIC);
@@ -2266,8 +2439,8 @@
 #endif
 	TCP_SKB_CB(skb)->when = tcp_time_stamp;
 	tcp_header_size = tcp_synack_options(sk, req, mss,
-					     skb, &opts, &md5) +
-			  sizeof(struct tcphdr);
+					     skb, &opts, &md5, xvp)
+			+ sizeof(*th);
 
 	skb_push(skb, tcp_header_size);
 	skb_reset_transport_header(skb);
@@ -2284,19 +2457,58 @@
 	 */
 	tcp_init_nondata_skb(skb, tcp_rsk(req)->snt_isn,
 			     TCPCB_FLAG_SYN | TCPCB_FLAG_ACK);
+
+	if (OPTION_COOKIE_EXTENSION & opts.options) {
+		const struct tcp_cookie_values *cvp = tp->cookie_values;
+
+		if (cvp != NULL &&
+		    cvp->s_data_constant &&
+		    cvp->s_data_desired > 0) {
+			u8 *buf = skb_put(skb, cvp->s_data_desired);
+
+			/* copy data directly from the listening socket. */
+			memcpy(buf, cvp->s_data_payload, cvp->s_data_desired);
+			TCP_SKB_CB(skb)->end_seq += cvp->s_data_desired;
+		}
+
+		if (opts.hash_size > 0) {
+			__u32 workspace[SHA_WORKSPACE_WORDS];
+			u32 *mess = &xvp->cookie_bakery[COOKIE_DIGEST_WORDS];
+			u32 *tail = &mess[COOKIE_MESSAGE_WORDS-1];
+
+			/* Secret recipe depends on the Timestamp, (future)
+			 * Sequence and Acknowledgment Numbers, Initiator
+			 * Cookie, and others handled by IP variant caller.
+			 */
+			*tail-- ^= opts.tsval;
+			*tail-- ^= tcp_rsk(req)->rcv_isn + 1;
+			*tail-- ^= TCP_SKB_CB(skb)->seq + 1;
+
+			/* recommended */
+			*tail-- ^= ((th->dest << 16) | th->source);
+			*tail-- ^= (u32)(unsigned long)cvp; /* per sockopt */
+
+			sha_transform((__u32 *)&xvp->cookie_bakery[0],
+				      (char *)mess,
+				      &workspace[0]);
+			opts.hash_location =
+				(__u8 *)&xvp->cookie_bakery[0];
+		}
+	}
+
 	th->seq = htonl(TCP_SKB_CB(skb)->seq);
 	th->ack_seq = htonl(tcp_rsk(req)->rcv_isn + 1);
 
 	/* RFC1323: The window in SYN & SYN/ACK segments is never scaled. */
 	th->window = htons(min(req->rcv_wnd, 65535U));
-	tcp_options_write((__be32 *)(th + 1), tp, &opts, &md5_hash_location);
+	tcp_options_write((__be32 *)(th + 1), tp, &opts);
 	th->doff = (tcp_header_size >> 2);
 	TCP_INC_STATS(sock_net(sk), TCP_MIB_OUTSEGS);
 
 #ifdef CONFIG_TCP_MD5SIG
 	/* Okay, we have all we need - do the md5 hash if needed */
 	if (md5) {
-		tcp_rsk(req)->af_specific->calc_md5_hash(md5_hash_location,
+		tcp_rsk(req)->af_specific->calc_md5_hash(opts.hash_location,
 					       md5, NULL, req, skb);
 	}
 #endif
@@ -2315,7 +2527,9 @@
 	 * See tcp_input.c:tcp_rcv_state_process case TCP_SYN_SENT.
 	 */
 	tp->tcp_header_len = sizeof(struct tcphdr) +
-		(sysctl_tcp_timestamps ? TCPOLEN_TSTAMP_ALIGNED : 0);
+		(sysctl_tcp_timestamps &&
+		(!dst_feature(dst, RTAX_FEATURE_NO_TSTAMP) ?
+		  TCPOLEN_TSTAMP_ALIGNED : 0));
 
 #ifdef CONFIG_TCP_MD5SIG
 	if (tp->af_specific->md5_lookup(sk, sk) != NULL)
@@ -2341,7 +2555,8 @@
 				  tp->advmss - (tp->rx_opt.ts_recent_stamp ? tp->tcp_header_len - sizeof(struct tcphdr) : 0),
 				  &tp->rcv_wnd,
 				  &tp->window_clamp,
-				  sysctl_tcp_window_scaling,
+				  (sysctl_tcp_window_scaling &&
+				   !dst_feature(dst, RTAX_FEATURE_NO_WSCALE)),
 				  &rcv_wscale);
 
 	tp->rx_opt.rcv_wscale = rcv_wscale;
diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c
index 59f5b5e..bb110c5 100644
--- a/net/ipv4/tcp_probe.c
+++ b/net/ipv4/tcp_probe.c
@@ -94,8 +94,9 @@
 	const struct inet_sock *inet = inet_sk(sk);
 
 	/* Only update if port matches */
-	if ((port == 0 || ntohs(inet->dport) == port || ntohs(inet->sport) == port)
-	    && (full || tp->snd_cwnd != tcp_probe.lastcwnd)) {
+	if ((port == 0 || ntohs(inet->inet_dport) == port ||
+	     ntohs(inet->inet_sport) == port) &&
+	    (full || tp->snd_cwnd != tcp_probe.lastcwnd)) {
 
 		spin_lock(&tcp_probe.lock);
 		/* If log fills, just silently drop */
@@ -103,10 +104,10 @@
 			struct tcp_log *p = tcp_probe.log + tcp_probe.head;
 
 			p->tstamp = ktime_get();
-			p->saddr = inet->saddr;
-			p->sport = inet->sport;
-			p->daddr = inet->daddr;
-			p->dport = inet->dport;
+			p->saddr = inet->inet_saddr;
+			p->sport = inet->inet_sport;
+			p->daddr = inet->inet_daddr;
+			p->dport = inet->inet_dport;
 			p->length = skb->len;
 			p->snd_nxt = tp->snd_nxt;
 			p->snd_una = tp->snd_una;
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index cdb2ca7..8353a53 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -141,14 +141,14 @@
 
 	if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
 		if (icsk->icsk_retransmits)
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
 	} else {
 		if (retransmits_timed_out(sk, sysctl_tcp_retries1)) {
 			/* Black hole detection */
 			tcp_mtu_probing(icsk, sk);
 
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		}
 
 		retry_until = sysctl_tcp_retries2;
@@ -303,15 +303,15 @@
 		struct inet_sock *inet = inet_sk(sk);
 		if (sk->sk_family == AF_INET) {
 			LIMIT_NETDEBUG(KERN_DEBUG "TCP: Peer %pI4:%u/%u unexpectedly shrunk window %u:%u (repaired)\n",
-			       &inet->daddr, ntohs(inet->dport),
-			       inet->num, tp->snd_una, tp->snd_nxt);
+			       &inet->inet_daddr, ntohs(inet->inet_dport),
+			       inet->inet_num, tp->snd_una, tp->snd_nxt);
 		}
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 		else if (sk->sk_family == AF_INET6) {
 			struct ipv6_pinfo *np = inet6_sk(sk);
 			LIMIT_NETDEBUG(KERN_DEBUG "TCP: Peer %pI6:%u/%u unexpectedly shrunk window %u:%u (repaired)\n",
-			       &np->daddr, ntohs(inet->dport),
-			       inet->num, tp->snd_una, tp->snd_nxt);
+			       &np->daddr, ntohs(inet->inet_dport),
+			       inet->inet_num, tp->snd_una, tp->snd_nxt);
 		}
 #endif
 #endif
diff --git a/net/ipv4/tcp_veno.c b/net/ipv4/tcp_veno.c
index e9bbff7..b612acf 100644
--- a/net/ipv4/tcp_veno.c
+++ b/net/ipv4/tcp_veno.c
@@ -165,9 +165,8 @@
 				 * every other rtt.
 				 */
 				if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
-					if (veno->inc
-					    && tp->snd_cwnd <
-					    tp->snd_cwnd_clamp) {
+					if (veno->inc &&
+					    tp->snd_cwnd < tp->snd_cwnd_clamp) {
 						tp->snd_cwnd++;
 						veno->inc = 0;
 					} else
diff --git a/net/ipv4/tcp_yeah.c b/net/ipv4/tcp_yeah.c
index 66b6821..a0f2403 100644
--- a/net/ipv4/tcp_yeah.c
+++ b/net/ipv4/tcp_yeah.c
@@ -157,8 +157,8 @@
 
 			if (queue > TCP_YEAH_ALPHA ||
 			    rtt - yeah->vegas.baseRTT > (yeah->vegas.baseRTT / TCP_YEAH_PHY)) {
-				if (queue > TCP_YEAH_ALPHA
-				    && tp->snd_cwnd > yeah->reno_count) {
+				if (queue > TCP_YEAH_ALPHA &&
+				    tp->snd_cwnd > yeah->reno_count) {
 					u32 reduction = min(queue / TCP_YEAH_GAMMA ,
 							    tp->snd_cwnd >> TCP_YEAH_EPSILON);
 
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 0fa9f70..1f95348 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -106,7 +106,7 @@
 #include <net/xfrm.h>
 #include "udp_impl.h"
 
-struct udp_table udp_table;
+struct udp_table udp_table __read_mostly;
 EXPORT_SYMBOL(udp_table);
 
 int sysctl_udp_mem[3] __read_mostly;
@@ -121,28 +121,30 @@
 atomic_t udp_memory_allocated;
 EXPORT_SYMBOL(udp_memory_allocated);
 
-#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE)
+#define MAX_UDP_PORTS 65536
+#define PORTS_PER_CHAIN (MAX_UDP_PORTS / UDP_HTABLE_SIZE_MIN)
 
 static int udp_lib_lport_inuse(struct net *net, __u16 num,
 			       const struct udp_hslot *hslot,
 			       unsigned long *bitmap,
 			       struct sock *sk,
 			       int (*saddr_comp)(const struct sock *sk1,
-						 const struct sock *sk2))
+						 const struct sock *sk2),
+			       unsigned int log)
 {
 	struct sock *sk2;
 	struct hlist_nulls_node *node;
 
 	sk_nulls_for_each(sk2, node, &hslot->head)
-		if (net_eq(sock_net(sk2), net)			&&
-		    sk2 != sk					&&
-		    (bitmap || sk2->sk_hash == num)		&&
-		    (!sk2->sk_reuse || !sk->sk_reuse)		&&
-		    (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if
-			|| sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
+		if (net_eq(sock_net(sk2), net) &&
+		    sk2 != sk &&
+		    (bitmap || udp_sk(sk2)->udp_port_hash == num) &&
+		    (!sk2->sk_reuse || !sk->sk_reuse) &&
+		    (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if ||
+		     sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
 		    (*saddr_comp)(sk, sk2)) {
 			if (bitmap)
-				__set_bit(sk2->sk_hash / UDP_HTABLE_SIZE,
+				__set_bit(udp_sk(sk2)->udp_port_hash >> log,
 					  bitmap);
 			else
 				return 1;
@@ -150,18 +152,51 @@
 	return 0;
 }
 
+/*
+ * Note: we still hold spinlock of primary hash chain, so no other writer
+ * can insert/delete a socket with local_port == num
+ */
+static int udp_lib_lport_inuse2(struct net *net, __u16 num,
+			       struct udp_hslot *hslot2,
+			       struct sock *sk,
+			       int (*saddr_comp)(const struct sock *sk1,
+						 const struct sock *sk2))
+{
+	struct sock *sk2;
+	struct hlist_nulls_node *node;
+	int res = 0;
+
+	spin_lock(&hslot2->lock);
+	udp_portaddr_for_each_entry(sk2, node, &hslot2->head)
+		if (net_eq(sock_net(sk2), net) &&
+		    sk2 != sk &&
+		    (udp_sk(sk2)->udp_port_hash == num) &&
+		    (!sk2->sk_reuse || !sk->sk_reuse) &&
+		    (!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if ||
+		     sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
+		    (*saddr_comp)(sk, sk2)) {
+			res = 1;
+			break;
+		}
+	spin_unlock(&hslot2->lock);
+	return res;
+}
+
 /**
  *  udp_lib_get_port  -  UDP/-Lite port lookup for IPv4 and IPv6
  *
  *  @sk:          socket struct in question
  *  @snum:        port number to look up
  *  @saddr_comp:  AF-dependent comparison of bound local IP addresses
+ *  @hash2_nulladdr: AF-dependant hash value in secondary hash chains,
+ *                   with NULL address
  */
 int udp_lib_get_port(struct sock *sk, unsigned short snum,
 		       int (*saddr_comp)(const struct sock *sk1,
-					 const struct sock *sk2))
+					 const struct sock *sk2),
+		     unsigned int hash2_nulladdr)
 {
-	struct udp_hslot *hslot;
+	struct udp_hslot *hslot, *hslot2;
 	struct udp_table *udptable = sk->sk_prot->h.udp_table;
 	int    error = 1;
 	struct net *net = sock_net(sk);
@@ -180,13 +215,15 @@
 		/*
 		 * force rand to be an odd multiple of UDP_HTABLE_SIZE
 		 */
-		rand = (rand | 1) * UDP_HTABLE_SIZE;
-		for (last = first + UDP_HTABLE_SIZE; first != last; first++) {
-			hslot = &udptable->hash[udp_hashfn(net, first)];
+		rand = (rand | 1) * (udptable->mask + 1);
+		for (last = first + udptable->mask + 1;
+		     first != last;
+		     first++) {
+			hslot = udp_hashslot(udptable, net, first);
 			bitmap_zero(bitmap, PORTS_PER_CHAIN);
 			spin_lock_bh(&hslot->lock);
 			udp_lib_lport_inuse(net, snum, hslot, bitmap, sk,
-					    saddr_comp);
+					    saddr_comp, udptable->log);
 
 			snum = first;
 			/*
@@ -196,7 +233,7 @@
 			 */
 			do {
 				if (low <= snum && snum <= high &&
-				    !test_bit(snum / UDP_HTABLE_SIZE, bitmap))
+				    !test_bit(snum >> udptable->log, bitmap))
 					goto found;
 				snum += rand;
 			} while (snum != first);
@@ -204,17 +241,51 @@
 		}
 		goto fail;
 	} else {
-		hslot = &udptable->hash[udp_hashfn(net, snum)];
+		hslot = udp_hashslot(udptable, net, snum);
 		spin_lock_bh(&hslot->lock);
-		if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp))
+		if (hslot->count > 10) {
+			int exist;
+			unsigned int slot2 = udp_sk(sk)->udp_portaddr_hash ^ snum;
+
+			slot2          &= udptable->mask;
+			hash2_nulladdr &= udptable->mask;
+
+			hslot2 = udp_hashslot2(udptable, slot2);
+			if (hslot->count < hslot2->count)
+				goto scan_primary_hash;
+
+			exist = udp_lib_lport_inuse2(net, snum, hslot2,
+						     sk, saddr_comp);
+			if (!exist && (hash2_nulladdr != slot2)) {
+				hslot2 = udp_hashslot2(udptable, hash2_nulladdr);
+				exist = udp_lib_lport_inuse2(net, snum, hslot2,
+							     sk, saddr_comp);
+			}
+			if (exist)
+				goto fail_unlock;
+			else
+				goto found;
+		}
+scan_primary_hash:
+		if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk,
+					saddr_comp, 0))
 			goto fail_unlock;
 	}
 found:
-	inet_sk(sk)->num = snum;
-	sk->sk_hash = snum;
+	inet_sk(sk)->inet_num = snum;
+	udp_sk(sk)->udp_port_hash = snum;
+	udp_sk(sk)->udp_portaddr_hash ^= snum;
 	if (sk_unhashed(sk)) {
 		sk_nulls_add_node_rcu(sk, &hslot->head);
+		hslot->count++;
 		sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
+
+		hslot2 = udp_hashslot2(udptable, udp_sk(sk)->udp_portaddr_hash);
+		spin_lock(&hslot2->lock);
+		hlist_nulls_add_head_rcu(&udp_sk(sk)->udp_portaddr_node,
+					 &hslot2->head);
+		hslot2->count++;
+		spin_unlock(&hslot2->lock);
 	}
 	error = 0;
 fail_unlock:
@@ -229,13 +300,26 @@
 	struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
 
 	return 	(!ipv6_only_sock(sk2)  &&
-		 (!inet1->rcv_saddr || !inet2->rcv_saddr ||
-		   inet1->rcv_saddr == inet2->rcv_saddr));
+		 (!inet1->inet_rcv_saddr || !inet2->inet_rcv_saddr ||
+		   inet1->inet_rcv_saddr == inet2->inet_rcv_saddr));
+}
+
+static unsigned int udp4_portaddr_hash(struct net *net, __be32 saddr,
+				       unsigned int port)
+{
+	return jhash_1word(saddr, net_hash_mix(net)) ^ port;
 }
 
 int udp_v4_get_port(struct sock *sk, unsigned short snum)
 {
-	return udp_lib_get_port(sk, snum, ipv4_rcv_saddr_equal);
+	unsigned int hash2_nulladdr =
+		udp4_portaddr_hash(sock_net(sk), INADDR_ANY, snum);
+	unsigned int hash2_partial =
+		udp4_portaddr_hash(sock_net(sk), inet_sk(sk)->inet_rcv_saddr, 0);
+
+	/* precompute partial secondary hash */
+	udp_sk(sk)->udp_portaddr_hash = hash2_partial;
+	return udp_lib_get_port(sk, snum, ipv4_rcv_saddr_equal, hash2_nulladdr);
 }
 
 static inline int compute_score(struct sock *sk, struct net *net, __be32 saddr,
@@ -244,23 +328,23 @@
 {
 	int score = -1;
 
-	if (net_eq(sock_net(sk), net) && sk->sk_hash == hnum &&
+	if (net_eq(sock_net(sk), net) && udp_sk(sk)->udp_port_hash == hnum &&
 			!ipv6_only_sock(sk)) {
 		struct inet_sock *inet = inet_sk(sk);
 
 		score = (sk->sk_family == PF_INET ? 1 : 0);
-		if (inet->rcv_saddr) {
-			if (inet->rcv_saddr != daddr)
+		if (inet->inet_rcv_saddr) {
+			if (inet->inet_rcv_saddr != daddr)
 				return -1;
 			score += 2;
 		}
-		if (inet->daddr) {
-			if (inet->daddr != saddr)
+		if (inet->inet_daddr) {
+			if (inet->inet_daddr != saddr)
 				return -1;
 			score += 2;
 		}
-		if (inet->dport) {
-			if (inet->dport != sport)
+		if (inet->inet_dport) {
+			if (inet->inet_dport != sport)
 				return -1;
 			score += 2;
 		}
@@ -273,6 +357,89 @@
 	return score;
 }
 
+/*
+ * In this second variant, we check (daddr, dport) matches (inet_rcv_sadd, inet_num)
+ */
+#define SCORE2_MAX (1 + 2 + 2 + 2)
+static inline int compute_score2(struct sock *sk, struct net *net,
+				 __be32 saddr, __be16 sport,
+				 __be32 daddr, unsigned int hnum, int dif)
+{
+	int score = -1;
+
+	if (net_eq(sock_net(sk), net) && !ipv6_only_sock(sk)) {
+		struct inet_sock *inet = inet_sk(sk);
+
+		if (inet->inet_rcv_saddr != daddr)
+			return -1;
+		if (inet->inet_num != hnum)
+			return -1;
+
+		score = (sk->sk_family == PF_INET ? 1 : 0);
+		if (inet->inet_daddr) {
+			if (inet->inet_daddr != saddr)
+				return -1;
+			score += 2;
+		}
+		if (inet->inet_dport) {
+			if (inet->inet_dport != sport)
+				return -1;
+			score += 2;
+		}
+		if (sk->sk_bound_dev_if) {
+			if (sk->sk_bound_dev_if != dif)
+				return -1;
+			score += 2;
+		}
+	}
+	return score;
+}
+
+
+/* called with read_rcu_lock() */
+static struct sock *udp4_lib_lookup2(struct net *net,
+		__be32 saddr, __be16 sport,
+		__be32 daddr, unsigned int hnum, int dif,
+		struct udp_hslot *hslot2, unsigned int slot2)
+{
+	struct sock *sk, *result;
+	struct hlist_nulls_node *node;
+	int score, badness;
+
+begin:
+	result = NULL;
+	badness = -1;
+	udp_portaddr_for_each_entry_rcu(sk, node, &hslot2->head) {
+		score = compute_score2(sk, net, saddr, sport,
+				      daddr, hnum, dif);
+		if (score > badness) {
+			result = sk;
+			badness = score;
+			if (score == SCORE2_MAX)
+				goto exact_match;
+		}
+	}
+	/*
+	 * if the nulls value we got at the end of this lookup is
+	 * not the expected one, we must restart lookup.
+	 * We probably met an item that was moved to another chain.
+	 */
+	if (get_nulls_value(node) != slot2)
+		goto begin;
+
+	if (result) {
+exact_match:
+		if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
+			result = NULL;
+		else if (unlikely(compute_score2(result, net, saddr, sport,
+				  daddr, hnum, dif) < badness)) {
+			sock_put(result);
+			goto begin;
+		}
+	}
+	return result;
+}
+
 /* UDP is nearly always wildcards out the wazoo, it makes no sense to try
  * harder than this. -DaveM
  */
@@ -283,11 +450,35 @@
 	struct sock *sk, *result;
 	struct hlist_nulls_node *node;
 	unsigned short hnum = ntohs(dport);
-	unsigned int hash = udp_hashfn(net, hnum);
-	struct udp_hslot *hslot = &udptable->hash[hash];
+	unsigned int hash2, slot2, slot = udp_hashfn(net, hnum, udptable->mask);
+	struct udp_hslot *hslot2, *hslot = &udptable->hash[slot];
 	int score, badness;
 
 	rcu_read_lock();
+	if (hslot->count > 10) {
+		hash2 = udp4_portaddr_hash(net, daddr, hnum);
+		slot2 = hash2 & udptable->mask;
+		hslot2 = &udptable->hash2[slot2];
+		if (hslot->count < hslot2->count)
+			goto begin;
+
+		result = udp4_lib_lookup2(net, saddr, sport,
+					  daddr, hnum, dif,
+					  hslot2, slot2);
+		if (!result) {
+			hash2 = udp4_portaddr_hash(net, INADDR_ANY, hnum);
+			slot2 = hash2 & udptable->mask;
+			hslot2 = &udptable->hash2[slot2];
+			if (hslot->count < hslot2->count)
+				goto begin;
+
+			result = udp4_lib_lookup2(net, INADDR_ANY, sport,
+						  daddr, hnum, dif,
+						  hslot2, slot2);
+		}
+		rcu_read_unlock();
+		return result;
+	}
 begin:
 	result = NULL;
 	badness = -1;
@@ -304,7 +495,7 @@
 	 * not the expected one, we must restart lookup.
 	 * We probably met an item that was moved to another chain.
 	 */
-	if (get_nulls_value(node) != hash)
+	if (get_nulls_value(node) != slot)
 		goto begin;
 
 	if (result) {
@@ -354,12 +545,13 @@
 	sk_nulls_for_each_from(s, node) {
 		struct inet_sock *inet = inet_sk(s);
 
-		if (!net_eq(sock_net(s), net)				||
-		    s->sk_hash != hnum					||
-		    (inet->daddr && inet->daddr != rmt_addr)		||
-		    (inet->dport != rmt_port && inet->dport)		||
-		    (inet->rcv_saddr && inet->rcv_saddr != loc_addr)	||
-		    ipv6_only_sock(s)					||
+		if (!net_eq(sock_net(s), net) ||
+		    udp_sk(s)->udp_port_hash != hnum ||
+		    (inet->inet_daddr && inet->inet_daddr != rmt_addr) ||
+		    (inet->inet_dport != rmt_port && inet->inet_dport) ||
+		    (inet->inet_rcv_saddr &&
+		     inet->inet_rcv_saddr != loc_addr) ||
+		    ipv6_only_sock(s) ||
 		    (s->sk_bound_dev_if && s->sk_bound_dev_if != dif))
 			continue;
 		if (!ip_mc_sf_allow(s, loc_addr, rmt_addr, dif))
@@ -642,14 +834,14 @@
 	} else {
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -EDESTADDRREQ;
-		daddr = inet->daddr;
-		dport = inet->dport;
+		daddr = inet->inet_daddr;
+		dport = inet->inet_dport;
 		/* Open fast path for connected socket.
 		   Route will not be used, if at least one option is set.
 		 */
 		connected = 1;
 	}
-	ipc.addr = inet->saddr;
+	ipc.addr = inet->inet_saddr;
 
 	ipc.oif = sk->sk_bound_dev_if;
 	err = sock_tx_timestamp(msg, sk, &ipc.shtx);
@@ -704,7 +896,7 @@
 				    .proto = sk->sk_protocol,
 				    .flags = inet_sk_flowi_flags(sk),
 				    .uli_u = { .ports =
-					       { .sport = inet->sport,
+					       { .sport = inet->inet_sport,
 						 .dport = dport } } };
 		struct net *net = sock_net(sk);
 
@@ -748,7 +940,7 @@
 	inet->cork.fl.fl4_dst = daddr;
 	inet->cork.fl.fl_ip_dport = dport;
 	inet->cork.fl.fl4_src = saddr;
-	inet->cork.fl.fl_ip_sport = inet->sport;
+	inet->cork.fl.fl_ip_sport = inet->inet_sport;
 	up->pending = AF_INET;
 
 do_append_data:
@@ -862,6 +1054,7 @@
 		udp_lib_checksum_complete(skb)) {
 		UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS,
 				 IS_UDPLITE(sk));
+		atomic_inc(&sk->sk_drops);
 		__skb_unlink(skb, rcvq);
 		__skb_queue_tail(&list_kill, skb);
 	}
@@ -982,7 +1175,7 @@
 		UDP_INC_STATS_USER(sock_net(sk),
 				UDP_MIB_INDATAGRAMS, is_udplite);
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	/* Copy the address. */
 	if (sin) {
@@ -1023,15 +1216,15 @@
 	 */
 
 	sk->sk_state = TCP_CLOSE;
-	inet->daddr = 0;
-	inet->dport = 0;
+	inet->inet_daddr = 0;
+	inet->inet_dport = 0;
 	sk->sk_bound_dev_if = 0;
 	if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
 		inet_reset_saddr(sk);
 
 	if (!(sk->sk_userlocks & SOCK_BINDPORT_LOCK)) {
 		sk->sk_prot->unhash(sk);
-		inet->sport = 0;
+		inet->inet_sport = 0;
 	}
 	sk_dst_reset(sk);
 	return 0;
@@ -1042,13 +1235,22 @@
 {
 	if (sk_hashed(sk)) {
 		struct udp_table *udptable = sk->sk_prot->h.udp_table;
-		unsigned int hash = udp_hashfn(sock_net(sk), sk->sk_hash);
-		struct udp_hslot *hslot = &udptable->hash[hash];
+		struct udp_hslot *hslot, *hslot2;
+
+		hslot  = udp_hashslot(udptable, sock_net(sk),
+				      udp_sk(sk)->udp_port_hash);
+		hslot2 = udp_hashslot2(udptable, udp_sk(sk)->udp_portaddr_hash);
 
 		spin_lock_bh(&hslot->lock);
 		if (sk_nulls_del_node_init_rcu(sk)) {
-			inet_sk(sk)->num = 0;
+			hslot->count--;
+			inet_sk(sk)->inet_num = 0;
 			sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
+
+			spin_lock(&hslot2->lock);
+			hlist_nulls_del_init_rcu(&udp_sk(sk)->udp_portaddr_node);
+			hslot2->count--;
+			spin_unlock(&hslot2->lock);
 		}
 		spin_unlock_bh(&hslot->lock);
 	}
@@ -1057,25 +1259,22 @@
 
 static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
-	int is_udplite = IS_UDPLITE(sk);
-	int rc;
+	int rc = sock_queue_rcv_skb(sk, skb);
 
-	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+	if (rc < 0) {
+		int is_udplite = IS_UDPLITE(sk);
+
 		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM) {
+		if (rc == -ENOMEM)
 			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
 					 is_udplite);
-			atomic_inc(&sk->sk_drops);
-		}
-		goto drop;
+		UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+		kfree_skb(skb);
+		return -1;
 	}
 
 	return 0;
 
-drop:
-	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
-	kfree_skb(skb);
-	return -1;
 }
 
 /* returns:
@@ -1182,53 +1381,88 @@
 
 drop:
 	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+	atomic_inc(&sk->sk_drops);
 	kfree_skb(skb);
 	return -1;
 }
 
+
+static void flush_stack(struct sock **stack, unsigned int count,
+			struct sk_buff *skb, unsigned int final)
+{
+	unsigned int i;
+	struct sk_buff *skb1 = NULL;
+	struct sock *sk;
+
+	for (i = 0; i < count; i++) {
+		sk = stack[i];
+		if (likely(skb1 == NULL))
+			skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+		if (!skb1) {
+			atomic_inc(&sk->sk_drops);
+			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
+					 IS_UDPLITE(sk));
+			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS,
+					 IS_UDPLITE(sk));
+		}
+
+		if (skb1 && udp_queue_rcv_skb(sk, skb1) <= 0)
+			skb1 = NULL;
+	}
+	if (unlikely(skb1))
+		kfree_skb(skb1);
+}
+
 /*
  *	Multicasts and broadcasts go to each listener.
  *
- *	Note: called only from the BH handler context,
- *	so we don't need to lock the hashes.
+ *	Note: called only from the BH handler context.
  */
 static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb,
 				    struct udphdr  *uh,
 				    __be32 saddr, __be32 daddr,
 				    struct udp_table *udptable)
 {
-	struct sock *sk;
-	struct udp_hslot *hslot = &udptable->hash[udp_hashfn(net, ntohs(uh->dest))];
+	struct sock *sk, *stack[256 / sizeof(struct sock *)];
+	struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
 	int dif;
+	unsigned int i, count = 0;
 
 	spin_lock(&hslot->lock);
 	sk = sk_nulls_head(&hslot->head);
 	dif = skb->dev->ifindex;
 	sk = udp_v4_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
-	if (sk) {
-		struct sock *sknext = NULL;
+	while (sk) {
+		stack[count++] = sk;
+		sk = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
+				       daddr, uh->source, saddr, dif);
+		if (unlikely(count == ARRAY_SIZE(stack))) {
+			if (!sk)
+				break;
+			flush_stack(stack, count, skb, ~0);
+			count = 0;
+		}
+	}
+	/*
+	 * before releasing chain lock, we must take a reference on sockets
+	 */
+	for (i = 0; i < count; i++)
+		sock_hold(stack[i]);
 
-		do {
-			struct sk_buff *skb1 = skb;
-
-			sknext = udp_v4_mcast_next(net, sk_nulls_next(sk), uh->dest,
-						   daddr, uh->source, saddr,
-						   dif);
-			if (sknext)
-				skb1 = skb_clone(skb, GFP_ATOMIC);
-
-			if (skb1) {
-				int ret = udp_queue_rcv_skb(sk, skb1);
-				if (ret > 0)
-					/* we should probably re-process instead
-					 * of dropping packets here. */
-					kfree_skb(skb1);
-			}
-			sk = sknext;
-		} while (sknext);
-	} else
-		consume_skb(skb);
 	spin_unlock(&hslot->lock);
+
+	/*
+	 * do the slow work with no lock held
+	 */
+	if (count) {
+		flush_stack(stack, count, skb, count - 1);
+
+		for (i = 0; i < count; i++)
+			sock_put(stack[i]);
+	} else {
+		kfree_skb(skb);
+	}
 	return 0;
 }
 
@@ -1620,9 +1854,14 @@
 	struct udp_iter_state *state = seq->private;
 	struct net *net = seq_file_net(seq);
 
-	for (state->bucket = start; state->bucket < UDP_HTABLE_SIZE; ++state->bucket) {
+	for (state->bucket = start; state->bucket <= state->udp_table->mask;
+	     ++state->bucket) {
 		struct hlist_nulls_node *node;
 		struct udp_hslot *hslot = &state->udp_table->hash[state->bucket];
+
+		if (hlist_nulls_empty(&hslot->head))
+			continue;
+
 		spin_lock_bh(&hslot->lock);
 		sk_nulls_for_each(sk, node, &hslot->head) {
 			if (!net_eq(sock_net(sk), net))
@@ -1647,7 +1886,7 @@
 	} while (sk && (!net_eq(sock_net(sk), net) || sk->sk_family != state->family));
 
 	if (!sk) {
-		if (state->bucket < UDP_HTABLE_SIZE)
+		if (state->bucket <= state->udp_table->mask)
 			spin_unlock_bh(&state->udp_table->hash[state->bucket].lock);
 		return udp_get_first(seq, state->bucket + 1);
 	}
@@ -1667,7 +1906,7 @@
 static void *udp_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	struct udp_iter_state *state = seq->private;
-	state->bucket = UDP_HTABLE_SIZE;
+	state->bucket = MAX_UDP_PORTS;
 
 	return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
 }
@@ -1689,7 +1928,7 @@
 {
 	struct udp_iter_state *state = seq->private;
 
-	if (state->bucket < UDP_HTABLE_SIZE)
+	if (state->bucket <= state->udp_table->mask)
 		spin_unlock_bh(&state->udp_table->hash[state->bucket].lock);
 }
 
@@ -1744,12 +1983,12 @@
 		int bucket, int *len)
 {
 	struct inet_sock *inet = inet_sk(sp);
-	__be32 dest = inet->daddr;
-	__be32 src  = inet->rcv_saddr;
-	__u16 destp	  = ntohs(inet->dport);
-	__u16 srcp	  = ntohs(inet->sport);
+	__be32 dest = inet->inet_daddr;
+	__be32 src  = inet->inet_rcv_saddr;
+	__u16 destp	  = ntohs(inet->inet_dport);
+	__u16 srcp	  = ntohs(inet->inet_sport);
 
-	seq_printf(f, "%4d: %08X:%04X %08X:%04X"
+	seq_printf(f, "%5d: %08X:%04X %08X:%04X"
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d%n",
 		bucket, src, srcp, dest, destp, sp->sk_state,
 		sk_wmem_alloc_get(sp),
@@ -1815,21 +2054,60 @@
 }
 #endif /* CONFIG_PROC_FS */
 
-void __init udp_table_init(struct udp_table *table)
+static __initdata unsigned long uhash_entries;
+static int __init set_uhash_entries(char *str)
 {
-	int i;
+	if (!str)
+		return 0;
+	uhash_entries = simple_strtoul(str, &str, 0);
+	if (uhash_entries && uhash_entries < UDP_HTABLE_SIZE_MIN)
+		uhash_entries = UDP_HTABLE_SIZE_MIN;
+	return 1;
+}
+__setup("uhash_entries=", set_uhash_entries);
 
-	for (i = 0; i < UDP_HTABLE_SIZE; i++) {
+void __init udp_table_init(struct udp_table *table, const char *name)
+{
+	unsigned int i;
+
+	if (!CONFIG_BASE_SMALL)
+		table->hash = alloc_large_system_hash(name,
+			2 * sizeof(struct udp_hslot),
+			uhash_entries,
+			21, /* one slot per 2 MB */
+			0,
+			&table->log,
+			&table->mask,
+			64 * 1024);
+	/*
+	 * Make sure hash table has the minimum size
+	 */
+	if (CONFIG_BASE_SMALL || table->mask < UDP_HTABLE_SIZE_MIN - 1) {
+		table->hash = kmalloc(UDP_HTABLE_SIZE_MIN *
+				      2 * sizeof(struct udp_hslot), GFP_KERNEL);
+		if (!table->hash)
+			panic(name);
+		table->log = ilog2(UDP_HTABLE_SIZE_MIN);
+		table->mask = UDP_HTABLE_SIZE_MIN - 1;
+	}
+	table->hash2 = table->hash + (table->mask + 1);
+	for (i = 0; i <= table->mask; i++) {
 		INIT_HLIST_NULLS_HEAD(&table->hash[i].head, i);
+		table->hash[i].count = 0;
 		spin_lock_init(&table->hash[i].lock);
 	}
+	for (i = 0; i <= table->mask; i++) {
+		INIT_HLIST_NULLS_HEAD(&table->hash2[i].head, i);
+		table->hash2[i].count = 0;
+		spin_lock_init(&table->hash2[i].lock);
+	}
 }
 
 void __init udp_init(void)
 {
 	unsigned long nr_pages, limit;
 
-	udp_table_init(&udp_table);
+	udp_table_init(&udp_table, "UDP");
 	/* Set the pressure threshold up by the same strategy of TCP. It is a
 	 * fraction of global memory that is up to 1/2 at 256 MB, decreasing
 	 * toward zero with the amount of memory, with a floor of 128 pages.
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index 95248d7..66f7951 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -12,7 +12,7 @@
  */
 #include "udp_impl.h"
 
-struct udp_table 	udplite_table;
+struct udp_table 	udplite_table __read_mostly;
 EXPORT_SYMBOL(udplite_table);
 
 static int udplite_rcv(struct sk_buff *skb)
@@ -64,7 +64,6 @@
 	.protocol	=  IPPROTO_UDPLITE,
 	.prot		=  &udplite_prot,
 	.ops		=  &inet_dgram_ops,
-	.capability	= -1,
 	.no_check	=  0,		/* must checksum (RFC 3828) */
 	.flags		=  INET_PROTOSW_PERMANENT,
 };
@@ -110,7 +109,7 @@
 
 void __init udplite4_register(void)
 {
-	udp_table_init(&udplite_table);
+	udp_table_init(&udplite_table, "UDP-Lite");
 	if (proto_register(&udplite_prot, 1))
 		goto out_register_err;
 
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index 74fb2eb..8c08a28 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -267,7 +267,6 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table xfrm4_policy_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "xfrm4_gc_thresh",
 		.data           = &xfrm4_dst_ops.gc_thresh,
 		.maxlen         = sizeof(int),
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ead6c7a..a578096 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -170,6 +170,25 @@
 
 	  Saying M here will produce a module called sit. If unsure, say Y.
 
+config IPV6_SIT_6RD
+	bool "IPv6: IPv6 Rapid Deployment (6RD) (EXPERIMENTAL)"
+	depends on IPV6_SIT && EXPERIMENTAL
+	default n
+	---help---
+	  IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon
+	  mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly
+	  deploy IPv6 unicast service to IPv4 sites to which it provides
+	  customer premise equipment.  Like 6to4, it utilizes stateless IPv6 in
+	  IPv4 encapsulation in order to transit IPv4-only network
+	  infrastructure.  Unlike 6to4, a 6rd service provider uses an IPv6
+	  prefix of its own in place of the fixed 6to4 prefix.
+
+	  With this option enabled, the SIT driver offers 6rd functionality by
+	  providing additional ioctl API to configure the IPv6 Prefix for in
+	  stead of static 2002::/16 for 6to4.
+
+	  If unsure, say N.
+
 config IPV6_NDISC_NODETYPE
 	bool
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 1fd0a3d..de7a194 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -481,9 +481,8 @@
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
-		rcu_read_lock();
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		idev = __in6_dev_get(dev);
 		if (idev) {
 			int changed = (!idev->cnf.forwarding) ^ (!newf);
@@ -491,9 +490,8 @@
 			if (changed)
 				dev_forward_change(idev);
 		}
-		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
@@ -1137,10 +1135,9 @@
 	hiscore->rule = -1;
 	hiscore->ifa = NULL;
 
-	read_lock(&dev_base_lock);
 	rcu_read_lock();
 
-	for_each_netdev(net, dev) {
+	for_each_netdev_rcu(net, dev) {
 		struct inet6_dev *idev;
 
 		/* Candidate Source Address (section 4)
@@ -1235,7 +1232,6 @@
 		read_unlock_bh(&idev->lock);
 	}
 	rcu_read_unlock();
-	read_unlock(&dev_base_lock);
 
 	if (!hiscore->ifa)
 		return -EADDRNOTAVAIL;
@@ -3485,85 +3481,114 @@
 	ANYCAST_ADDR,
 };
 
-static int inet6_dump_addr(struct sk_buff *skb, struct netlink_callback *cb,
-			   enum addr_type_t type)
+/* called with rcu_read_lock() */
+static int in6_dump_addrs(struct inet6_dev *idev, struct sk_buff *skb,
+			  struct netlink_callback *cb, enum addr_type_t type,
+			  int s_ip_idx, int *p_ip_idx)
 {
-	int idx, ip_idx;
-	int s_idx, s_ip_idx;
-	int err = 1;
-	struct net_device *dev;
-	struct inet6_dev *idev = NULL;
 	struct inet6_ifaddr *ifa;
 	struct ifmcaddr6 *ifmca;
 	struct ifacaddr6 *ifaca;
-	struct net *net = sock_net(skb->sk);
+	int err = 1;
+	int ip_idx = *p_ip_idx;
 
-	s_idx = cb->args[0];
-	s_ip_idx = ip_idx = cb->args[1];
-
-	idx = 0;
-	for_each_netdev(net, dev) {
-		if (idx < s_idx)
-			goto cont;
-		if (idx > s_idx)
-			s_ip_idx = 0;
-		ip_idx = 0;
-		if ((idev = in6_dev_get(dev)) == NULL)
-			goto cont;
-		read_lock_bh(&idev->lock);
-		switch (type) {
-		case UNICAST_ADDR:
-			/* unicast address incl. temp addr */
-			for (ifa = idev->addr_list; ifa;
-			     ifa = ifa->if_next, ip_idx++) {
-				if (ip_idx < s_ip_idx)
-					continue;
-				err = inet6_fill_ifaddr(skb, ifa,
-							NETLINK_CB(cb->skb).pid,
-							cb->nlh->nlmsg_seq,
-							RTM_NEWADDR,
-							NLM_F_MULTI);
-			}
-			break;
-		case MULTICAST_ADDR:
-			/* multicast address */
-			for (ifmca = idev->mc_list; ifmca;
-			     ifmca = ifmca->next, ip_idx++) {
-				if (ip_idx < s_ip_idx)
-					continue;
-				err = inet6_fill_ifmcaddr(skb, ifmca,
-							  NETLINK_CB(cb->skb).pid,
-							  cb->nlh->nlmsg_seq,
-							  RTM_GETMULTICAST,
-							  NLM_F_MULTI);
-			}
-			break;
-		case ANYCAST_ADDR:
-			/* anycast address */
-			for (ifaca = idev->ac_list; ifaca;
-			     ifaca = ifaca->aca_next, ip_idx++) {
-				if (ip_idx < s_ip_idx)
-					continue;
-				err = inet6_fill_ifacaddr(skb, ifaca,
-							  NETLINK_CB(cb->skb).pid,
-							  cb->nlh->nlmsg_seq,
-							  RTM_GETANYCAST,
-							  NLM_F_MULTI);
-			}
-			break;
-		default:
-			break;
+	read_lock_bh(&idev->lock);
+	switch (type) {
+	case UNICAST_ADDR:
+		/* unicast address incl. temp addr */
+		for (ifa = idev->addr_list; ifa;
+		     ifa = ifa->if_next, ip_idx++) {
+			if (ip_idx < s_ip_idx)
+				continue;
+			err = inet6_fill_ifaddr(skb, ifa,
+						NETLINK_CB(cb->skb).pid,
+						cb->nlh->nlmsg_seq,
+						RTM_NEWADDR,
+						NLM_F_MULTI);
+			if (err <= 0)
+				break;
 		}
-		read_unlock_bh(&idev->lock);
-		in6_dev_put(idev);
-
-		if (err <= 0)
-			break;
-cont:
-		idx++;
+		break;
+	case MULTICAST_ADDR:
+		/* multicast address */
+		for (ifmca = idev->mc_list; ifmca;
+		     ifmca = ifmca->next, ip_idx++) {
+			if (ip_idx < s_ip_idx)
+				continue;
+			err = inet6_fill_ifmcaddr(skb, ifmca,
+						  NETLINK_CB(cb->skb).pid,
+						  cb->nlh->nlmsg_seq,
+						  RTM_GETMULTICAST,
+						  NLM_F_MULTI);
+			if (err <= 0)
+				break;
+		}
+		break;
+	case ANYCAST_ADDR:
+		/* anycast address */
+		for (ifaca = idev->ac_list; ifaca;
+		     ifaca = ifaca->aca_next, ip_idx++) {
+			if (ip_idx < s_ip_idx)
+				continue;
+			err = inet6_fill_ifacaddr(skb, ifaca,
+						  NETLINK_CB(cb->skb).pid,
+						  cb->nlh->nlmsg_seq,
+						  RTM_GETANYCAST,
+						  NLM_F_MULTI);
+			if (err <= 0)
+				break;
+		}
+		break;
+	default:
+		break;
 	}
-	cb->args[0] = idx;
-	cb->args[1] = ip_idx;
+	read_unlock_bh(&idev->lock);
+	*p_ip_idx = ip_idx;
+	return err;
+}
+
+static int inet6_dump_addr(struct sk_buff *skb, struct netlink_callback *cb,
+			   enum addr_type_t type)
+{
+	struct net *net = sock_net(skb->sk);
+	int h, s_h;
+	int idx, ip_idx;
+	int s_idx, s_ip_idx;
+	struct net_device *dev;
+	struct inet6_dev *idev;
+	struct hlist_head *head;
+	struct hlist_node *node;
+
+	s_h = cb->args[0];
+	s_idx = idx = cb->args[1];
+	s_ip_idx = ip_idx = cb->args[2];
+
+	rcu_read_lock();
+	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
+		idx = 0;
+		head = &net->dev_index_head[h];
+		hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
+			if (idx < s_idx)
+				goto cont;
+			if (idx > s_idx)
+				s_ip_idx = 0;
+			ip_idx = 0;
+			if ((idev = __in6_dev_get(dev)) == NULL)
+				goto cont;
+
+			if (in6_dump_addrs(idev, skb, cb, type,
+					   s_ip_idx, &ip_idx) <= 0)
+				goto done;
+cont:
+			idx++;
+		}
+	}
+done:
+	rcu_read_unlock();
+	cb->args[0] = h;
+	cb->args[1] = idx;
+	cb->args[2] = ip_idx;
+
 	return skb->len;
 }
 
@@ -3708,6 +3733,7 @@
 #endif
 	array[DEVCONF_DISABLE_IPV6] = cnf->disable_ipv6;
 	array[DEVCONF_ACCEPT_DAD] = cnf->accept_dad;
+	array[DEVCONF_FORCE_TLLAO] = cnf->force_tllao;
 }
 
 static inline size_t inet6_if_nlmsg_size(void)
@@ -3826,28 +3852,39 @@
 static int inet6_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(skb->sk);
-	int idx, err;
-	int s_idx = cb->args[0];
+	int h, s_h;
+	int idx = 0, s_idx;
 	struct net_device *dev;
 	struct inet6_dev *idev;
+	struct hlist_head *head;
+	struct hlist_node *node;
 
-	read_lock(&dev_base_lock);
-	idx = 0;
-	for_each_netdev(net, dev) {
-		if (idx < s_idx)
-			goto cont;
-		if ((idev = in6_dev_get(dev)) == NULL)
-			goto cont;
-		err = inet6_fill_ifinfo(skb, idev, NETLINK_CB(cb->skb).pid,
-				cb->nlh->nlmsg_seq, RTM_NEWLINK, NLM_F_MULTI);
-		in6_dev_put(idev);
-		if (err <= 0)
-			break;
+	s_h = cb->args[0];
+	s_idx = cb->args[1];
+
+	rcu_read_lock();
+	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
+		idx = 0;
+		head = &net->dev_index_head[h];
+		hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
+			if (idx < s_idx)
+				goto cont;
+			idev = __in6_dev_get(dev);
+			if (!idev)
+				goto cont;
+			if (inet6_fill_ifinfo(skb, idev,
+					      NETLINK_CB(cb->skb).pid,
+					      cb->nlh->nlmsg_seq,
+					      RTM_NEWLINK, NLM_F_MULTI) <= 0)
+				goto out;
 cont:
-		idx++;
+			idx++;
+		}
 	}
-	read_unlock(&dev_base_lock);
-	cb->args[0] = idx;
+out:
+	rcu_read_unlock();
+	cb->args[1] = idx;
+	cb->args[0] = h;
 
 	return skb->len;
 }
@@ -4000,41 +4037,6 @@
 	return ret;
 }
 
-static int addrconf_sysctl_forward_strategy(ctl_table *table,
-					    void __user *oldval,
-					    size_t __user *oldlenp,
-					    void __user *newval, size_t newlen)
-{
-	int *valp = table->data;
-	int val = *valp;
-	int new;
-
-	if (!newval || !newlen)
-		return 0;
-	if (newlen != sizeof(int))
-		return -EINVAL;
-	if (get_user(new, (int __user *)newval))
-		return -EFAULT;
-	if (new == *valp)
-		return 0;
-	if (oldval && oldlenp) {
-		size_t len;
-		if (get_user(len, oldlenp))
-			return -EFAULT;
-		if (len) {
-			if (len > table->maxlen)
-				len = table->maxlen;
-			if (copy_to_user(oldval, valp, len))
-				return -EFAULT;
-			if (put_user(len, oldlenp))
-				return -EFAULT;
-		}
-	}
-
-	*valp = new;
-	return addrconf_fixup_forwarding(table, valp, val);
-}
-
 static void dev_disable_change(struct inet6_dev *idev)
 {
 	if (!idev || !idev->dev)
@@ -4051,9 +4053,8 @@
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
-		rcu_read_lock();
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		idev = __in6_dev_get(dev);
 		if (idev) {
 			int changed = (!idev->cnf.disable_ipv6) ^ (!newf);
@@ -4061,9 +4062,8 @@
 			if (changed)
 				dev_disable_change(idev);
 		}
-		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old)
@@ -4113,16 +4113,13 @@
 	.sysctl_header = NULL,
 	.addrconf_vars = {
 		{
-			.ctl_name	=	NET_IPV6_FORWARDING,
 			.procname	=	"forwarding",
 			.data		=	&ipv6_devconf.forwarding,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
 			.proc_handler	=	addrconf_sysctl_forward,
-			.strategy	=	addrconf_sysctl_forward_strategy,
 		},
 		{
-			.ctl_name	=	NET_IPV6_HOP_LIMIT,
 			.procname	=	"hop_limit",
 			.data		=	&ipv6_devconf.hop_limit,
 			.maxlen		=	sizeof(int),
@@ -4130,7 +4127,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_MTU,
 			.procname	=	"mtu",
 			.data		=	&ipv6_devconf.mtu6,
 			.maxlen		=	sizeof(int),
@@ -4138,7 +4134,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_RA,
 			.procname	=	"accept_ra",
 			.data		=	&ipv6_devconf.accept_ra,
 			.maxlen		=	sizeof(int),
@@ -4146,7 +4141,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_REDIRECTS,
 			.procname	=	"accept_redirects",
 			.data		=	&ipv6_devconf.accept_redirects,
 			.maxlen		=	sizeof(int),
@@ -4154,7 +4148,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_AUTOCONF,
 			.procname	=	"autoconf",
 			.data		=	&ipv6_devconf.autoconf,
 			.maxlen		=	sizeof(int),
@@ -4162,7 +4155,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_DAD_TRANSMITS,
 			.procname	=	"dad_transmits",
 			.data		=	&ipv6_devconf.dad_transmits,
 			.maxlen		=	sizeof(int),
@@ -4170,7 +4162,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_RTR_SOLICITS,
 			.procname	=	"router_solicitations",
 			.data		=	&ipv6_devconf.rtr_solicits,
 			.maxlen		=	sizeof(int),
@@ -4178,25 +4169,20 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_RTR_SOLICIT_INTERVAL,
 			.procname	=	"router_solicitation_interval",
 			.data		=	&ipv6_devconf.rtr_solicit_interval,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
 			.proc_handler	=	proc_dointvec_jiffies,
-			.strategy	=	sysctl_jiffies,
 		},
 		{
-			.ctl_name	=	NET_IPV6_RTR_SOLICIT_DELAY,
 			.procname	=	"router_solicitation_delay",
 			.data		=	&ipv6_devconf.rtr_solicit_delay,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
 			.proc_handler	=	proc_dointvec_jiffies,
-			.strategy	=	sysctl_jiffies,
 		},
 		{
-			.ctl_name	=	NET_IPV6_FORCE_MLD_VERSION,
 			.procname	=	"force_mld_version",
 			.data		=	&ipv6_devconf.force_mld_version,
 			.maxlen		=	sizeof(int),
@@ -4205,7 +4191,6 @@
 		},
 #ifdef CONFIG_IPV6_PRIVACY
 		{
-			.ctl_name	=	NET_IPV6_USE_TEMPADDR,
 			.procname	=	"use_tempaddr",
 			.data		=	&ipv6_devconf.use_tempaddr,
 			.maxlen		=	sizeof(int),
@@ -4213,7 +4198,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_TEMP_VALID_LFT,
 			.procname	=	"temp_valid_lft",
 			.data		=	&ipv6_devconf.temp_valid_lft,
 			.maxlen		=	sizeof(int),
@@ -4221,7 +4205,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_TEMP_PREFERED_LFT,
 			.procname	=	"temp_prefered_lft",
 			.data		=	&ipv6_devconf.temp_prefered_lft,
 			.maxlen		=	sizeof(int),
@@ -4229,7 +4212,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_REGEN_MAX_RETRY,
 			.procname	=	"regen_max_retry",
 			.data		=	&ipv6_devconf.regen_max_retry,
 			.maxlen		=	sizeof(int),
@@ -4237,7 +4219,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_MAX_DESYNC_FACTOR,
 			.procname	=	"max_desync_factor",
 			.data		=	&ipv6_devconf.max_desync_factor,
 			.maxlen		=	sizeof(int),
@@ -4246,7 +4227,6 @@
 		},
 #endif
 		{
-			.ctl_name	=	NET_IPV6_MAX_ADDRESSES,
 			.procname	=	"max_addresses",
 			.data		=	&ipv6_devconf.max_addresses,
 			.maxlen		=	sizeof(int),
@@ -4254,7 +4234,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_RA_DEFRTR,
 			.procname	=	"accept_ra_defrtr",
 			.data		=	&ipv6_devconf.accept_ra_defrtr,
 			.maxlen		=	sizeof(int),
@@ -4262,7 +4241,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_RA_PINFO,
 			.procname	=	"accept_ra_pinfo",
 			.data		=	&ipv6_devconf.accept_ra_pinfo,
 			.maxlen		=	sizeof(int),
@@ -4271,7 +4249,6 @@
 		},
 #ifdef CONFIG_IPV6_ROUTER_PREF
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_RA_RTR_PREF,
 			.procname	=	"accept_ra_rtr_pref",
 			.data		=	&ipv6_devconf.accept_ra_rtr_pref,
 			.maxlen		=	sizeof(int),
@@ -4279,17 +4256,14 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_RTR_PROBE_INTERVAL,
 			.procname	=	"router_probe_interval",
 			.data		=	&ipv6_devconf.rtr_probe_interval,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
 			.proc_handler	=	proc_dointvec_jiffies,
-			.strategy	=	sysctl_jiffies,
 		},
 #ifdef CONFIG_IPV6_ROUTE_INFO
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_RA_RT_INFO_MAX_PLEN,
 			.procname	=	"accept_ra_rt_info_max_plen",
 			.data		=	&ipv6_devconf.accept_ra_rt_info_max_plen,
 			.maxlen		=	sizeof(int),
@@ -4299,7 +4273,6 @@
 #endif
 #endif
 		{
-			.ctl_name	=	NET_IPV6_PROXY_NDP,
 			.procname	=	"proxy_ndp",
 			.data		=	&ipv6_devconf.proxy_ndp,
 			.maxlen		=	sizeof(int),
@@ -4307,7 +4280,6 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	NET_IPV6_ACCEPT_SOURCE_ROUTE,
 			.procname	=	"accept_source_route",
 			.data		=	&ipv6_devconf.accept_source_route,
 			.maxlen		=	sizeof(int),
@@ -4316,7 +4288,6 @@
 		},
 #ifdef CONFIG_IPV6_OPTIMISTIC_DAD
 		{
-			.ctl_name	=	CTL_UNNUMBERED,
 			.procname       =       "optimistic_dad",
 			.data           =       &ipv6_devconf.optimistic_dad,
 			.maxlen         =       sizeof(int),
@@ -4327,7 +4298,6 @@
 #endif
 #ifdef CONFIG_IPV6_MROUTE
 		{
-			.ctl_name	=	CTL_UNNUMBERED,
 			.procname	=	"mc_forwarding",
 			.data		=	&ipv6_devconf.mc_forwarding,
 			.maxlen		=	sizeof(int),
@@ -4336,16 +4306,13 @@
 		},
 #endif
 		{
-			.ctl_name	=	CTL_UNNUMBERED,
 			.procname	=	"disable_ipv6",
 			.data		=	&ipv6_devconf.disable_ipv6,
 			.maxlen		=	sizeof(int),
 			.mode		=	0644,
 			.proc_handler	=	addrconf_sysctl_disable,
-			.strategy	=	sysctl_intvec,
 		},
 		{
-			.ctl_name	=	CTL_UNNUMBERED,
 			.procname	=	"accept_dad",
 			.data		=	&ipv6_devconf.accept_dad,
 			.maxlen		=	sizeof(int),
@@ -4353,13 +4320,20 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
-			.ctl_name	=	0,	/* sentinel */
+			.procname       = "force_tllao",
+			.data           = &ipv6_devconf.force_tllao,
+			.maxlen         = sizeof(int),
+			.mode           = 0644,
+			.proc_handler   = proc_dointvec
+		},
+		{
+			/* sentinel */
 		}
 	},
 };
 
 static int __addrconf_sysctl_register(struct net *net, char *dev_name,
-		int ctl_name, struct inet6_dev *idev, struct ipv6_devconf *p)
+		struct inet6_dev *idev, struct ipv6_devconf *p)
 {
 	int i;
 	struct addrconf_sysctl_table *t;
@@ -4367,9 +4341,9 @@
 #define ADDRCONF_CTL_PATH_DEV	3
 
 	struct ctl_path addrconf_ctl_path[] = {
-		{ .procname = "net", .ctl_name = CTL_NET, },
-		{ .procname = "ipv6", .ctl_name = NET_IPV6, },
-		{ .procname = "conf", .ctl_name = NET_IPV6_CONF, },
+		{ .procname = "net", },
+		{ .procname = "ipv6", },
+		{ .procname = "conf", },
 		{ /* to be set */ },
 		{ },
 	};
@@ -4395,7 +4369,6 @@
 		goto free;
 
 	addrconf_ctl_path[ADDRCONF_CTL_PATH_DEV].procname = t->dev_name;
-	addrconf_ctl_path[ADDRCONF_CTL_PATH_DEV].ctl_name = ctl_name;
 
 	t->sysctl_header = register_net_sysctl_table(net, addrconf_ctl_path,
 			t->addrconf_vars);
@@ -4431,10 +4404,9 @@
 {
 	neigh_sysctl_register(idev->dev, idev->nd_parms, NET_IPV6,
 			      NET_IPV6_NEIGH, "ipv6",
-			      &ndisc_ifinfo_sysctl_change,
-			      ndisc_ifinfo_sysctl_strategy);
+			      &ndisc_ifinfo_sysctl_change);
 	__addrconf_sysctl_register(dev_net(idev->dev), idev->dev->name,
-			idev->dev->ifindex, idev, &idev->cnf);
+					idev, &idev->cnf);
 }
 
 static void addrconf_sysctl_unregister(struct inet6_dev *idev)
@@ -4455,7 +4427,7 @@
 	all = &ipv6_devconf;
 	dflt = &ipv6_devconf_dflt;
 
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		all = kmemdup(all, sizeof(ipv6_devconf), GFP_KERNEL);
 		if (all == NULL)
 			goto err_alloc_all;
@@ -4473,13 +4445,11 @@
 	net->ipv6.devconf_dflt = dflt;
 
 #ifdef CONFIG_SYSCTL
-	err = __addrconf_sysctl_register(net, "all", NET_PROTO_CONF_ALL,
-			NULL, all);
+	err = __addrconf_sysctl_register(net, "all", NULL, all);
 	if (err < 0)
 		goto err_reg_all;
 
-	err = __addrconf_sysctl_register(net, "default", NET_PROTO_CONF_DEFAULT,
-			NULL, dflt);
+	err = __addrconf_sysctl_register(net, "default", NULL, dflt);
 	if (err < 0)
 		goto err_reg_dflt;
 #endif
@@ -4503,7 +4473,7 @@
 	__addrconf_sysctl_unregister(net->ipv6.devconf_dflt);
 	__addrconf_sysctl_unregister(net->ipv6.devconf_all);
 #endif
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		kfree(net->ipv6.devconf_dflt);
 		kfree(net->ipv6.devconf_all);
 	}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index e127a32..12e69d3 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -95,7 +95,8 @@
 	return (struct ipv6_pinfo *)(((u8 *)sk) + offset);
 }
 
-static int inet6_create(struct net *net, struct socket *sock, int protocol)
+static int inet6_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct inet_sock *inet;
 	struct ipv6_pinfo *np;
@@ -158,7 +159,7 @@
 	}
 
 	err = -EPERM;
-	if (answer->capability > 0 && !capable(answer->capability))
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
 		goto out_rcu_unlock;
 
 	sock->ops = answer->ops;
@@ -185,7 +186,7 @@
 	inet->is_icsk = (INET_PROTOSW_ICSK & answer_flags) != 0;
 
 	if (SOCK_RAW == sock->type) {
-		inet->num = protocol;
+		inet->inet_num = protocol;
 		if (IPPROTO_RAW == protocol)
 			inet->hdrincl = 1;
 	}
@@ -228,12 +229,12 @@
 	 */
 	sk_refcnt_debug_inc(sk);
 
-	if (inet->num) {
+	if (inet->inet_num) {
 		/* It assumes that any protocol which allows
 		 * the user to assign a number at socket
 		 * creation time automatically shares.
 		 */
-		inet->sport = htons(inet->num);
+		inet->inet_sport = htons(inet->inet_num);
 		sk->sk_prot->hash(sk);
 	}
 	if (sk->sk_prot->init) {
@@ -281,7 +282,7 @@
 	lock_sock(sk);
 
 	/* Check these errors (active socket, double bind). */
-	if (sk->sk_state != TCP_CLOSE || inet->num) {
+	if (sk->sk_state != TCP_CLOSE || inet->inet_num) {
 		err = -EINVAL;
 		goto out;
 	}
@@ -314,6 +315,7 @@
 		if (addr_type != IPV6_ADDR_ANY) {
 			struct net_device *dev = NULL;
 
+			rcu_read_lock();
 			if (addr_type & IPV6_ADDR_LINKLOCAL) {
 				if (addr_len >= sizeof(struct sockaddr_in6) &&
 				    addr->sin6_scope_id) {
@@ -326,12 +328,12 @@
 				/* Binding to link-local address requires an interface */
 				if (!sk->sk_bound_dev_if) {
 					err = -EINVAL;
-					goto out;
+					goto out_unlock;
 				}
-				dev = dev_get_by_index(net, sk->sk_bound_dev_if);
+				dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
 				if (!dev) {
 					err = -ENODEV;
-					goto out;
+					goto out_unlock;
 				}
 			}
 
@@ -342,19 +344,16 @@
 			if (!(addr_type & IPV6_ADDR_MULTICAST))	{
 				if (!ipv6_chk_addr(net, &addr->sin6_addr,
 						   dev, 0)) {
-					if (dev)
-						dev_put(dev);
 					err = -EADDRNOTAVAIL;
-					goto out;
+					goto out_unlock;
 				}
 			}
-			if (dev)
-				dev_put(dev);
+			rcu_read_unlock();
 		}
 	}
 
-	inet->rcv_saddr = v4addr;
-	inet->saddr = v4addr;
+	inet->inet_rcv_saddr = v4addr;
+	inet->inet_saddr = v4addr;
 
 	ipv6_addr_copy(&np->rcv_saddr, &addr->sin6_addr);
 
@@ -375,12 +374,15 @@
 	}
 	if (snum)
 		sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
-	inet->sport = htons(inet->num);
-	inet->dport = 0;
-	inet->daddr = 0;
+	inet->inet_sport = htons(inet->inet_num);
+	inet->inet_dport = 0;
+	inet->inet_daddr = 0;
 out:
 	release_sock(sk);
 	return err;
+out_unlock:
+	rcu_read_unlock();
+	goto out;
 }
 
 EXPORT_SYMBOL(inet6_bind);
@@ -441,12 +443,12 @@
 	sin->sin6_flowinfo = 0;
 	sin->sin6_scope_id = 0;
 	if (peer) {
-		if (!inet->dport)
+		if (!inet->inet_dport)
 			return -ENOTCONN;
 		if (((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_SYN_SENT)) &&
 		    peer == 1)
 			return -ENOTCONN;
-		sin->sin6_port = inet->dport;
+		sin->sin6_port = inet->inet_dport;
 		ipv6_addr_copy(&sin->sin6_addr, &np->daddr);
 		if (np->sndflow)
 			sin->sin6_flowinfo = np->flow_label;
@@ -456,7 +458,7 @@
 		else
 			ipv6_addr_copy(&sin->sin6_addr, &np->rcv_saddr);
 
-		sin->sin6_port = inet->sport;
+		sin->sin6_port = inet->inet_sport;
 	}
 	if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL)
 		sin->sin6_scope_id = sk->sk_bound_dev_if;
@@ -552,7 +554,7 @@
 #endif
 };
 
-static struct net_proto_family inet6_family_ops = {
+static const struct net_proto_family inet6_family_ops = {
 	.family = PF_INET6,
 	.create = inet6_create,
 	.owner	= THIS_MODULE,
@@ -654,8 +656,9 @@
 		ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 		fl.fl6_flowlabel = np->flow_label;
 		fl.oif = sk->sk_bound_dev_if;
-		fl.fl_ip_dport = inet->dport;
-		fl.fl_ip_sport = inet->sport;
+		fl.mark = sk->sk_mark;
+		fl.fl_ip_dport = inet->inet_dport;
+		fl.fl_ip_sport = inet->inet_sport;
 		security_sk_classify_flow(sk, &fl);
 
 		if (np->opt && np->opt->srcrt) {
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index c1589e2..c2f300c 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -24,18 +24,92 @@
  * 	This file is derived from net/ipv4/ah.c.
  */
 
+#include <crypto/hash.h>
 #include <linux/module.h>
 #include <net/ip.h>
 #include <net/ah.h>
 #include <linux/crypto.h>
 #include <linux/pfkeyv2.h>
-#include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/scatterlist.h>
 #include <net/icmp.h>
 #include <net/ipv6.h>
 #include <net/protocol.h>
 #include <net/xfrm.h>
 
+#define IPV6HDR_BASELEN 8
+
+struct tmp_ext {
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+		struct in6_addr saddr;
+#endif
+		struct in6_addr daddr;
+		char hdrs[0];
+};
+
+struct ah_skb_cb {
+	struct xfrm_skb_cb xfrm;
+	void *tmp;
+};
+
+#define AH_SKB_CB(__skb) ((struct ah_skb_cb *)&((__skb)->cb[0]))
+
+static void *ah_alloc_tmp(struct crypto_ahash *ahash, int nfrags,
+			  unsigned int size)
+{
+	unsigned int len;
+
+	len = size + crypto_ahash_digestsize(ahash) +
+	      (crypto_ahash_alignmask(ahash) &
+	       ~(crypto_tfm_ctx_alignment() - 1));
+
+	len = ALIGN(len, crypto_tfm_ctx_alignment());
+
+	len += sizeof(struct ahash_request) + crypto_ahash_reqsize(ahash);
+	len = ALIGN(len, __alignof__(struct scatterlist));
+
+	len += sizeof(struct scatterlist) * nfrags;
+
+	return kmalloc(len, GFP_ATOMIC);
+}
+
+static inline struct tmp_ext *ah_tmp_ext(void *base)
+{
+	return base + IPV6HDR_BASELEN;
+}
+
+static inline u8 *ah_tmp_auth(u8 *tmp, unsigned int offset)
+{
+	return tmp + offset;
+}
+
+static inline u8 *ah_tmp_icv(struct crypto_ahash *ahash, void *tmp,
+			     unsigned int offset)
+{
+	return PTR_ALIGN((u8 *)tmp + offset, crypto_ahash_alignmask(ahash) + 1);
+}
+
+static inline struct ahash_request *ah_tmp_req(struct crypto_ahash *ahash,
+					       u8 *icv)
+{
+	struct ahash_request *req;
+
+	req = (void *)PTR_ALIGN(icv + crypto_ahash_digestsize(ahash),
+				crypto_tfm_ctx_alignment());
+
+	ahash_request_set_tfm(req, ahash);
+
+	return req;
+}
+
+static inline struct scatterlist *ah_req_sg(struct crypto_ahash *ahash,
+					     struct ahash_request *req)
+{
+	return (void *)ALIGN((unsigned long)(req + 1) +
+			     crypto_ahash_reqsize(ahash),
+			     __alignof__(struct scatterlist));
+}
+
 static int zero_out_mutable_opts(struct ipv6_opt_hdr *opthdr)
 {
 	u8 *opt = (u8 *)opthdr;
@@ -218,24 +292,85 @@
 	return 0;
 }
 
+static void ah6_output_done(struct crypto_async_request *base, int err)
+{
+	int extlen;
+	u8 *iph_base;
+	u8 *icv;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = skb_dst(skb)->xfrm;
+	struct ah_data *ahp = x->data;
+	struct ipv6hdr *top_iph = ipv6_hdr(skb);
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	struct tmp_ext *iph_ext;
+
+	extlen = skb_network_header_len(skb) - sizeof(struct ipv6hdr);
+	if (extlen)
+		extlen += sizeof(*iph_ext);
+
+	iph_base = AH_SKB_CB(skb)->tmp;
+	iph_ext = ah_tmp_ext(iph_base);
+	icv = ah_tmp_icv(ahp->ahash, iph_ext, extlen);
+
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
+	memcpy(top_iph, iph_base, IPV6HDR_BASELEN);
+
+	if (extlen) {
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+		memcpy(&top_iph->saddr, iph_ext, extlen);
+#else
+		memcpy(&top_iph->daddr, iph_ext, extlen);
+#endif
+	}
+
+	err = ah->nexthdr;
+
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_output_resume(skb, err);
+}
+
 static int ah6_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err;
+	int nfrags;
 	int extlen;
+	u8 *iph_base;
+	u8 *icv;
+	u8 nexthdr;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
 	struct ipv6hdr *top_iph;
 	struct ip_auth_hdr *ah;
 	struct ah_data *ahp;
-	u8 nexthdr;
-	char tmp_base[8];
-	struct {
-#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-		struct in6_addr saddr;
-#endif
-		struct in6_addr daddr;
-		char hdrs[0];
-	} *tmp_ext;
+	struct tmp_ext *iph_ext;
+
+	ahp = x->data;
+	ahash = ahp->ahash;
+
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
 
 	skb_push(skb, -skb_network_offset(skb));
+	extlen = skb_network_header_len(skb) - sizeof(struct ipv6hdr);
+	if (extlen)
+		extlen += sizeof(*iph_ext);
+
+	err = -ENOMEM;
+	iph_base = ah_alloc_tmp(ahash, nfrags, IPV6HDR_BASELEN + extlen);
+	if (!iph_base)
+		goto out;
+
+	iph_ext = ah_tmp_ext(iph_base);
+	icv = ah_tmp_icv(ahash, iph_ext, extlen);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	ah = ip_auth_hdr(skb);
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
+
 	top_iph = ipv6_hdr(skb);
 	top_iph->payload_len = htons(skb->len - sizeof(*top_iph));
 
@@ -245,31 +380,22 @@
 	/* When there are no extension headers, we only need to save the first
 	 * 8 bytes of the base IP header.
 	 */
-	memcpy(tmp_base, top_iph, sizeof(tmp_base));
+	memcpy(iph_base, top_iph, IPV6HDR_BASELEN);
 
-	tmp_ext = NULL;
-	extlen = skb_transport_offset(skb) - sizeof(struct ipv6hdr);
 	if (extlen) {
-		extlen += sizeof(*tmp_ext);
-		tmp_ext = kmalloc(extlen, GFP_ATOMIC);
-		if (!tmp_ext) {
-			err = -ENOMEM;
-			goto error;
-		}
 #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-		memcpy(tmp_ext, &top_iph->saddr, extlen);
+		memcpy(iph_ext, &top_iph->saddr, extlen);
 #else
-		memcpy(tmp_ext, &top_iph->daddr, extlen);
+		memcpy(iph_ext, &top_iph->daddr, extlen);
 #endif
 		err = ipv6_clear_mutable_options(top_iph,
-						 extlen - sizeof(*tmp_ext) +
+						 extlen - sizeof(*iph_ext) +
 						 sizeof(*top_iph),
 						 XFRM_POLICY_OUT);
 		if (err)
-			goto error_free_iph;
+			goto out_free;
 	}
 
-	ah = ip_auth_hdr(skb);
 	ah->nexthdr = nexthdr;
 
 	top_iph->priority    = 0;
@@ -278,36 +404,80 @@
 	top_iph->flow_lbl[2] = 0;
 	top_iph->hop_limit   = 0;
 
-	ahp = x->data;
 	ah->hdrlen  = (XFRM_ALIGN8(sizeof(*ah) + ahp->icv_trunc_len) >> 2) - 2;
 
 	ah->reserved = 0;
 	ah->spi = x->id.spi;
 	ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output);
 
-	spin_lock_bh(&x->lock);
-	err = ah_mac_digest(ahp, skb, ah->auth_data);
-	memcpy(ah->auth_data, ahp->work_icv, ahp->icv_trunc_len);
-	spin_unlock_bh(&x->lock);
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
 
-	if (err)
-		goto error_free_iph;
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah6_output_done, skb);
 
-	memcpy(top_iph, tmp_base, sizeof(tmp_base));
-	if (tmp_ext) {
-#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-		memcpy(&top_iph->saddr, tmp_ext, extlen);
-#else
-		memcpy(&top_iph->daddr, tmp_ext, extlen);
-#endif
-error_free_iph:
-		kfree(tmp_ext);
+	AH_SKB_CB(skb)->tmp = iph_base;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
 	}
 
-error:
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
+	memcpy(top_iph, iph_base, IPV6HDR_BASELEN);
+
+	if (extlen) {
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+		memcpy(&top_iph->saddr, iph_ext, extlen);
+#else
+		memcpy(&top_iph->daddr, iph_ext, extlen);
+#endif
+	}
+
+out_free:
+	kfree(iph_base);
+out:
 	return err;
 }
 
+static void ah6_input_done(struct crypto_async_request *base, int err)
+{
+	u8 *auth_data;
+	u8 *icv;
+	u8 *work_iph;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = xfrm_input_state(skb);
+	struct ah_data *ahp = x->data;
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	int hdr_len = skb_network_header_len(skb);
+	int ah_hlen = (ah->hdrlen + 2) << 2;
+
+	work_iph = AH_SKB_CB(skb)->tmp;
+	auth_data = ah_tmp_auth(work_iph, hdr_len);
+	icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len);
+
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
+	if (err)
+		goto out;
+
+	skb->network_header += ah_hlen;
+	memcpy(skb_network_header(skb), work_iph, hdr_len);
+	__skb_pull(skb, ah_hlen + hdr_len);
+	skb_set_transport_header(skb, -hdr_len);
+
+	err = ah->nexthdr;
+out:
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_input_resume(skb, err);
+}
+
+
+
 static int ah6_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	/*
@@ -325,14 +495,21 @@
 	 * There is offset of AH before IPv6 header after the process.
 	 */
 
+	u8 *auth_data;
+	u8 *icv;
+	u8 *work_iph;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
 	struct ip_auth_hdr *ah;
 	struct ipv6hdr *ip6h;
 	struct ah_data *ahp;
-	unsigned char *tmp_hdr = NULL;
 	u16 hdr_len;
 	u16 ah_hlen;
 	int nexthdr;
-	int err = -EINVAL;
+	int nfrags;
+	int err = -ENOMEM;
 
 	if (!pskb_may_pull(skb, sizeof(struct ip_auth_hdr)))
 		goto out;
@@ -345,9 +522,11 @@
 
 	skb->ip_summed = CHECKSUM_NONE;
 
-	hdr_len = skb->data - skb_network_header(skb);
+	hdr_len = skb_network_header_len(skb);
 	ah = (struct ip_auth_hdr *)skb->data;
 	ahp = x->data;
+	ahash = ahp->ahash;
+
 	nexthdr = ah->nexthdr;
 	ah_hlen = (ah->hdrlen + 2) << 2;
 
@@ -358,48 +537,67 @@
 	if (!pskb_may_pull(skb, ah_hlen))
 		goto out;
 
-	tmp_hdr = kmemdup(skb_network_header(skb), hdr_len, GFP_ATOMIC);
-	if (!tmp_hdr)
-		goto out;
 	ip6h = ipv6_hdr(skb);
+
+	skb_push(skb, hdr_len);
+
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
+
+	work_iph = ah_alloc_tmp(ahash, nfrags, hdr_len + ahp->icv_trunc_len);
+	if (!work_iph)
+		goto out;
+
+	auth_data = ah_tmp_auth(work_iph, hdr_len);
+	icv = ah_tmp_icv(ahash, auth_data, ahp->icv_trunc_len);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	memcpy(work_iph, ip6h, hdr_len);
+	memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
+
 	if (ipv6_clear_mutable_options(ip6h, hdr_len, XFRM_POLICY_IN))
-		goto free_out;
+		goto out_free;
+
 	ip6h->priority    = 0;
 	ip6h->flow_lbl[0] = 0;
 	ip6h->flow_lbl[1] = 0;
 	ip6h->flow_lbl[2] = 0;
 	ip6h->hop_limit   = 0;
 
-	spin_lock(&x->lock);
-	{
-		u8 auth_data[MAX_AH_AUTH_LEN];
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
 
-		memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
-		memset(ah->auth_data, 0, ahp->icv_trunc_len);
-		skb_push(skb, hdr_len);
-		err = ah_mac_digest(ahp, skb, ah->auth_data);
-		if (err)
-			goto unlock;
-		if (memcmp(ahp->work_icv, auth_data, ahp->icv_trunc_len))
-			err = -EBADMSG;
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah6_input_done, skb);
+
+	AH_SKB_CB(skb)->tmp = work_iph;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
 	}
-unlock:
-	spin_unlock(&x->lock);
 
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
 	if (err)
-		goto free_out;
+		goto out_free;
 
 	skb->network_header += ah_hlen;
-	memcpy(skb_network_header(skb), tmp_hdr, hdr_len);
+	memcpy(skb_network_header(skb), work_iph, hdr_len);
 	skb->transport_header = skb->network_header;
 	__skb_pull(skb, ah_hlen + hdr_len);
 
-	kfree(tmp_hdr);
+	err = nexthdr;
 
-	return nexthdr;
-
-free_out:
-	kfree(tmp_hdr);
+out_free:
+	kfree(work_iph);
 out:
 	return err;
 }
@@ -430,7 +628,7 @@
 {
 	struct ah_data *ahp = NULL;
 	struct xfrm_algo_desc *aalg_desc;
-	struct crypto_hash *tfm;
+	struct crypto_ahash *ahash;
 
 	if (!x->aalg)
 		goto error;
@@ -442,12 +640,12 @@
 	if (ahp == NULL)
 		return -ENOMEM;
 
-	tfm = crypto_alloc_hash(x->aalg->alg_name, 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(tfm))
+	ahash = crypto_alloc_ahash(x->aalg->alg_name, 0, 0);
+	if (IS_ERR(ahash))
 		goto error;
 
-	ahp->tfm = tfm;
-	if (crypto_hash_setkey(tfm, x->aalg->alg_key,
+	ahp->ahash = ahash;
+	if (crypto_ahash_setkey(ahash, x->aalg->alg_key,
 			       (x->aalg->alg_key_len + 7) / 8))
 		goto error;
 
@@ -461,22 +659,18 @@
 	BUG_ON(!aalg_desc);
 
 	if (aalg_desc->uinfo.auth.icv_fullbits/8 !=
-	    crypto_hash_digestsize(tfm)) {
+	    crypto_ahash_digestsize(ahash)) {
 		printk(KERN_INFO "AH: %s digestsize %u != %hu\n",
-		       x->aalg->alg_name, crypto_hash_digestsize(tfm),
+		       x->aalg->alg_name, crypto_ahash_digestsize(ahash),
 		       aalg_desc->uinfo.auth.icv_fullbits/8);
 		goto error;
 	}
 
 	ahp->icv_full_len = aalg_desc->uinfo.auth.icv_fullbits/8;
-	ahp->icv_trunc_len = aalg_desc->uinfo.auth.icv_truncbits/8;
+	ahp->icv_trunc_len = x->aalg->alg_trunc_len/8;
 
 	BUG_ON(ahp->icv_trunc_len > MAX_AH_AUTH_LEN);
 
-	ahp->work_icv = kmalloc(ahp->icv_full_len, GFP_KERNEL);
-	if (!ahp->work_icv)
-		goto error;
-
 	x->props.header_len = XFRM_ALIGN8(sizeof(struct ip_auth_hdr) +
 					  ahp->icv_trunc_len);
 	switch (x->props.mode) {
@@ -495,8 +689,7 @@
 
 error:
 	if (ahp) {
-		kfree(ahp->work_icv);
-		crypto_free_hash(ahp->tfm);
+		crypto_free_ahash(ahp->ahash);
 		kfree(ahp);
 	}
 	return -EINVAL;
@@ -509,8 +702,7 @@
 	if (!ahp)
 		return;
 
-	kfree(ahp->work_icv);
-	crypto_free_hash(ahp->tfm);
+	crypto_free_ahash(ahp->ahash);
 	kfree(ahp);
 }
 
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 1ae58be..f1c74c8 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -404,13 +404,13 @@
 
 	if (dev)
 		return ipv6_chk_acast_dev(dev, addr);
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev)
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev)
 		if (ipv6_chk_acast_dev(dev, addr)) {
 			found = 1;
 			break;
 		}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return found;
 }
 
@@ -431,9 +431,9 @@
 	struct net *net = seq_file_net(seq);
 
 	state->idev = NULL;
-	for_each_netdev(net, state->dev) {
+	for_each_netdev_rcu(net, state->dev) {
 		struct inet6_dev *idev;
-		idev = in6_dev_get(state->dev);
+		idev = __in6_dev_get(state->dev);
 		if (!idev)
 			continue;
 		read_lock_bh(&idev->lock);
@@ -443,7 +443,6 @@
 			break;
 		}
 		read_unlock_bh(&idev->lock);
-		in6_dev_put(idev);
 	}
 	return im;
 }
@@ -454,16 +453,15 @@
 
 	im = im->aca_next;
 	while (!im) {
-		if (likely(state->idev != NULL)) {
+		if (likely(state->idev != NULL))
 			read_unlock_bh(&state->idev->lock);
-			in6_dev_put(state->idev);
-		}
-		state->dev = next_net_device(state->dev);
+
+		state->dev = next_net_device_rcu(state->dev);
 		if (!state->dev) {
 			state->idev = NULL;
 			break;
 		}
-		state->idev = in6_dev_get(state->dev);
+		state->idev = __in6_dev_get(state->dev);
 		if (!state->idev)
 			continue;
 		read_lock_bh(&state->idev->lock);
@@ -482,29 +480,30 @@
 }
 
 static void *ac6_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(RCU)
 {
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	return ac6_get_idx(seq, *pos);
 }
 
 static void *ac6_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
-	struct ifacaddr6 *im;
-	im = ac6_get_next(seq, v);
+	struct ifacaddr6 *im = ac6_get_next(seq, v);
+
 	++*pos;
 	return im;
 }
 
 static void ac6_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(RCU)
 {
 	struct ac6_iter_state *state = ac6_seq_private(seq);
+
 	if (likely(state->idev != NULL)) {
 		read_unlock_bh(&state->idev->lock);
-		in6_dev_put(state->idev);
+		state->idev = NULL;
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int ac6_seq_show(struct seq_file *seq, void *v)
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index e2bdc6d..e6f9cdf 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -98,17 +98,15 @@
 		if (err)
 			goto out;
 
-		ipv6_addr_set(&np->daddr, 0, 0, htonl(0x0000ffff), inet->daddr);
+		ipv6_addr_set_v4mapped(inet->inet_daddr, &np->daddr);
 
-		if (ipv6_addr_any(&np->saddr)) {
-			ipv6_addr_set(&np->saddr, 0, 0, htonl(0x0000ffff),
-				      inet->saddr);
-		}
+		if (ipv6_addr_any(&np->saddr))
+			ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
 
-		if (ipv6_addr_any(&np->rcv_saddr)) {
-			ipv6_addr_set(&np->rcv_saddr, 0, 0, htonl(0x0000ffff),
-				      inet->rcv_saddr);
-		}
+		if (ipv6_addr_any(&np->rcv_saddr))
+			ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
+					       &np->rcv_saddr);
+
 		goto out;
 	}
 
@@ -136,7 +134,7 @@
 	ipv6_addr_copy(&np->daddr, daddr);
 	np->flow_label = fl.fl6_flowlabel;
 
-	inet->dport = usin->sin6_port;
+	inet->inet_dport = usin->sin6_port;
 
 	/*
 	 *	Check for a route to destination an obtain the
@@ -147,8 +145,9 @@
 	ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
 	ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 	fl.oif = sk->sk_bound_dev_if;
-	fl.fl_ip_dport = inet->dport;
-	fl.fl_ip_sport = inet->sport;
+	fl.mark = sk->sk_mark;
+	fl.fl_ip_dport = inet->inet_dport;
+	fl.fl_ip_sport = inet->inet_sport;
 
 	if (!fl.oif && (addr_type&IPV6_ADDR_MULTICAST))
 		fl.oif = np->mcast_oif;
@@ -190,7 +189,7 @@
 
 	if (ipv6_addr_any(&np->rcv_saddr)) {
 		ipv6_addr_copy(&np->rcv_saddr, &fl.fl6_src);
-		inet->rcv_saddr = LOOPBACK4_IPV6;
+		inet->inet_rcv_saddr = LOOPBACK4_IPV6;
 	}
 
 	ip6_dst_store(sk, dst,
@@ -329,9 +328,8 @@
 			if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL)
 				sin->sin6_scope_id = IP6CB(skb)->iif;
 		} else {
-			ipv6_addr_set(&sin->sin6_addr, 0, 0,
-				      htonl(0xffff),
-				      *(__be32 *)(nh + serr->addr_offset));
+			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
+					       &sin->sin6_addr);
 		}
 	}
 
@@ -351,8 +349,8 @@
 		} else {
 			struct inet_sock *inet = inet_sk(sk);
 
-			ipv6_addr_set(&sin->sin6_addr, 0, 0,
-				      htonl(0xffff), ip_hdr(skb)->saddr);
+			ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
+					       &sin->sin6_addr);
 			if (inet->cmsg_flags)
 				ip_cmsg_recv(msg, skb);
 		}
@@ -539,12 +537,17 @@
 
 			addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
 
+			rcu_read_lock();
 			if (fl->oif) {
-				dev = dev_get_by_index(net, fl->oif);
-				if (!dev)
+				dev = dev_get_by_index_rcu(net, fl->oif);
+				if (!dev) {
+					rcu_read_unlock();
 					return -ENODEV;
-			} else if (addr_type & IPV6_ADDR_LINKLOCAL)
+				}
+			} else if (addr_type & IPV6_ADDR_LINKLOCAL) {
+				rcu_read_unlock();
 				return -EINVAL;
+			}
 
 			if (addr_type != IPV6_ADDR_ANY) {
 				int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
@@ -555,8 +558,7 @@
 					ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
 			}
 
-			if (dev)
-				dev_put(dev);
+			rcu_read_unlock();
 
 			if (err)
 				goto exit_f;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index af597c7..668a46b 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -473,7 +473,7 @@
 		}
 
 		err = crypto_aead_setauthsize(
-			aead, aalg_desc->uinfo.auth.icv_truncbits / 8);
+			aead, x->aalg->alg_trunc_len / 8);
 		if (err)
 			goto free_key;
 	}
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 00a7a5e..b7aa7c6 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -264,44 +264,36 @@
 
 static int fib6_rules_net_init(struct net *net)
 {
+	struct fib_rules_ops *ops;
 	int err = -ENOMEM;
 
-	net->ipv6.fib6_rules_ops = kmemdup(&fib6_rules_ops_template,
-					   sizeof(*net->ipv6.fib6_rules_ops),
-					   GFP_KERNEL);
-	if (!net->ipv6.fib6_rules_ops)
-		goto out;
+	ops = fib_rules_register(&fib6_rules_ops_template, net);
+	if (IS_ERR(ops))
+		return PTR_ERR(ops);
+	net->ipv6.fib6_rules_ops = ops;
 
-	net->ipv6.fib6_rules_ops->fro_net = net;
-	INIT_LIST_HEAD(&net->ipv6.fib6_rules_ops->rules_list);
 
 	err = fib_default_rule_add(net->ipv6.fib6_rules_ops, 0,
-				   RT6_TABLE_LOCAL, FIB_RULE_PERMANENT);
+				   RT6_TABLE_LOCAL, 0);
 	if (err)
 		goto out_fib6_rules_ops;
 
 	err = fib_default_rule_add(net->ipv6.fib6_rules_ops,
 				   0x7FFE, RT6_TABLE_MAIN, 0);
 	if (err)
-		goto out_fib6_default_rule_add;
+		goto out_fib6_rules_ops;
 
-	err = fib_rules_register(net->ipv6.fib6_rules_ops);
-	if (err)
-		goto out_fib6_default_rule_add;
 out:
 	return err;
 
-out_fib6_default_rule_add:
-	fib_rules_cleanup_ops(net->ipv6.fib6_rules_ops);
 out_fib6_rules_ops:
-	kfree(net->ipv6.fib6_rules_ops);
+	fib_rules_unregister(ops);
 	goto out;
 }
 
 static void fib6_rules_net_exit(struct net *net)
 {
 	fib_rules_unregister(net->ipv6.fib6_rules_ops);
-	kfree(net->ipv6.fib6_rules_ops);
 }
 
 static struct pernet_operations fib6_rules_net_ops = {
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index f23ebbe..4ae661b 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -942,15 +942,13 @@
 #ifdef CONFIG_SYSCTL
 ctl_table ipv6_icmp_table_template[] = {
 	{
-		.ctl_name	= NET_IPV6_ICMP_RATELIMIT,
 		.procname	= "ratelimit",
 		.data		= &init_net.ipv6.sysctl.icmpv6_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_ms_jiffies,
-		.strategy	= sysctl_ms_jiffies
 	},
-	{ .ctl_name = 0 },
+	{ },
 };
 
 struct ctl_table *ipv6_icmp_sysctl_init(struct net *net)
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index cc4797d..3516e6f 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -132,7 +132,7 @@
 
 	sin6->sin6_family = AF_INET6;
 	ipv6_addr_copy(&sin6->sin6_addr, &np->daddr);
-	sin6->sin6_port	= inet_sk(sk)->dport;
+	sin6->sin6_port	= inet_sk(sk)->inet_dport;
 	/* We do not store received flowlabel for TCP */
 	sin6->sin6_flowinfo = 0;
 	sin6->sin6_scope_id = 0;
@@ -168,8 +168,7 @@
 	if (dst) {
 		struct rt6_info *rt = (struct rt6_info *)dst;
 		if (rt->rt6i_flow_cache_genid != atomic_read(&flow_cache_genid)) {
-			sk->sk_dst_cache = NULL;
-			dst_release(dst);
+			__sk_dst_reset(sk);
 			dst = NULL;
 		}
 	}
@@ -194,8 +193,9 @@
 	fl.fl6_flowlabel = np->flow_label;
 	IP6_ECN_flow_xmit(sk, fl.fl6_flowlabel);
 	fl.oif = sk->sk_bound_dev_if;
-	fl.fl_ip_sport = inet->sport;
-	fl.fl_ip_dport = inet->dport;
+	fl.mark = sk->sk_mark;
+	fl.fl_ip_sport = inet->inet_sport;
+	fl.fl_ip_dport = inet->inet_dport;
 	security_sk_classify_flow(sk, &fl);
 
 	if (np->opt && np->opt->srcrt) {
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 1bcc343..c813e29 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -73,7 +73,7 @@
 	 * have wildcards anyways.
 	 */
 	unsigned int hash = inet6_ehashfn(net, daddr, hnum, saddr, sport);
-	unsigned int slot = hash & (hashinfo->ehash_size - 1);
+	unsigned int slot = hash & hashinfo->ehash_mask;
 	struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
 
 
@@ -125,7 +125,7 @@
 {
 	int score = -1;
 
-	if (net_eq(sock_net(sk), net) && inet_sk(sk)->num == hnum &&
+	if (net_eq(sock_net(sk), net) && inet_sk(sk)->inet_num == hnum &&
 	    sk->sk_family == PF_INET6) {
 		const struct ipv6_pinfo *np = inet6_sk(sk);
 
@@ -214,15 +214,16 @@
 	const struct in6_addr *daddr = &np->rcv_saddr;
 	const struct in6_addr *saddr = &np->daddr;
 	const int dif = sk->sk_bound_dev_if;
-	const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport);
+	const __portpair ports = INET_COMBINED_PORTS(inet->inet_dport, lport);
 	struct net *net = sock_net(sk);
 	const unsigned int hash = inet6_ehashfn(net, daddr, lport, saddr,
-						inet->dport);
+						inet->inet_dport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
 	spinlock_t *lock = inet_ehash_lockp(hinfo, hash);
 	struct sock *sk2;
 	const struct hlist_nulls_node *node;
 	struct inet_timewait_sock *tw;
+	int twrefcnt = 0;
 
 	spin_lock(lock);
 
@@ -248,21 +249,25 @@
 unique:
 	/* Must record num and sport now. Otherwise we will see
 	 * in hash table socket with a funny identity. */
-	inet->num = lport;
-	inet->sport = htons(lport);
+	inet->inet_num = lport;
+	inet->inet_sport = htons(lport);
+	sk->sk_hash = hash;
 	WARN_ON(!sk_unhashed(sk));
 	__sk_nulls_add_node_rcu(sk, &head->chain);
-	sk->sk_hash = hash;
+	if (tw) {
+		twrefcnt = inet_twsk_unhash(tw);
+		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
+	}
 	spin_unlock(lock);
+	if (twrefcnt)
+		inet_twsk_put(tw);
 	sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
 
-	if (twp != NULL) {
+	if (twp) {
 		*twp = tw;
-		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
-	} else if (tw != NULL) {
+	} else if (tw) {
 		/* Silly. Should hash-dance instead... */
 		inet_twsk_deschedule(tw, death_row);
-		NET_INC_STATS_BH(net, LINUX_MIB_TIMEWAITRECYCLED);
 
 		inet_twsk_put(tw);
 	}
@@ -279,7 +284,7 @@
 	const struct ipv6_pinfo *np = inet6_sk(sk);
 	return secure_ipv6_port_ephemeral(np->rcv_saddr.s6_addr32,
 					  np->daddr.s6_addr32,
-					  inet->dport);
+					  inet->inet_dport);
 }
 
 int inet6_hash_connect(struct inet_timewait_death_row *death_row,
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index 7712578..6e7bffa 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -67,7 +67,7 @@
 	struct ip6_flowlabel *fl;
 
 	for (fl=fl_ht[FL_HASH(label)]; fl; fl = fl->next) {
-		if (fl->label == label && fl->fl_net == net)
+		if (fl->label == label && net_eq(fl->fl_net, net))
 			return fl;
 	}
 	return NULL;
@@ -163,7 +163,8 @@
 		struct ip6_flowlabel *fl, **flp;
 		flp = &fl_ht[i];
 		while ((fl = *flp) != NULL) {
-			if (fl->fl_net == net && atomic_read(&fl->users) == 0) {
+			if (net_eq(fl->fl_net, net) &&
+			    atomic_read(&fl->users) == 0) {
 				*flp = fl->next;
 				fl_free(fl);
 				atomic_dec(&fl_size);
@@ -377,8 +378,8 @@
 		goto done;
 	fl->share = freq->flr_share;
 	addr_type = ipv6_addr_type(&freq->flr_dst);
-	if ((addr_type&IPV6_ADDR_MAPPED)
-	    || addr_type == IPV6_ADDR_ANY) {
+	if ((addr_type & IPV6_ADDR_MAPPED) ||
+	    addr_type == IPV6_ADDR_ANY) {
 		err = -EINVAL;
 		goto done;
 	}
@@ -421,8 +422,8 @@
 
 	if (room <= 0 ||
 	    ((count >= FL_MAX_PER_SOCK ||
-	     (count > 0 && room < FL_MAX_SIZE/2) || room < FL_MAX_SIZE/4)
-	     && !capable(CAP_NET_ADMIN)))
+	      (count > 0 && room < FL_MAX_SIZE/2) || room < FL_MAX_SIZE/4) &&
+	     !capable(CAP_NET_ADMIN)))
 		return -ENOBUFS;
 
 	return 0;
@@ -630,7 +631,7 @@
 	for (state->bucket = 0; state->bucket <= FL_HASH_MASK; ++state->bucket) {
 		fl = fl_ht[state->bucket];
 
-		while (fl && fl->fl_net != net)
+		while (fl && !net_eq(fl->fl_net, net))
 			fl = fl->next;
 		if (fl)
 			break;
@@ -645,7 +646,7 @@
 
 	fl = fl->next;
 try_again:
-	while (fl && fl->fl_net != net)
+	while (fl && !net_eq(fl->fl_net, net))
 		fl = fl->next;
 
 	while (!fl) {
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index c595bbe..d453d07 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -78,7 +78,7 @@
 static void ip6_tnl_dev_init(struct net_device *dev);
 static void ip6_tnl_dev_setup(struct net_device *dev);
 
-static int ip6_tnl_net_id;
+static int ip6_tnl_net_id __read_mostly;
 struct ip6_tnl_net {
 	/* the IPv6 tunnel fallback device */
 	struct net_device *fb_tnl_dev;
@@ -88,8 +88,10 @@
 	struct ip6_tnl **tnls[2];
 };
 
-/* lock for the tunnel lists */
-static DEFINE_RWLOCK(ip6_tnl_lock);
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ip6_tnl_lock);
 
 static inline struct dst_entry *ip6_tnl_dst_check(struct ip6_tnl *t)
 {
@@ -130,6 +132,9 @@
  *   else %NULL
  **/
 
+#define for_each_ip6_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
+
 static struct ip6_tnl *
 ip6_tnl_lookup(struct net *net, struct in6_addr *remote, struct in6_addr *local)
 {
@@ -138,13 +143,14 @@
 	struct ip6_tnl *t;
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 
-	for (t = ip6n->tnls_r_l[h0 ^ h1]; t; t = t->next) {
+	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[h0 ^ h1]) {
 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
 		    ipv6_addr_equal(remote, &t->parms.raddr) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	if ((t = ip6n->tnls_wc[0]) != NULL && (t->dev->flags & IFF_UP))
+	t = rcu_dereference(ip6n->tnls_wc[0]);
+	if (t && (t->dev->flags & IFF_UP))
 		return t;
 
 	return NULL;
@@ -186,10 +192,10 @@
 {
 	struct ip6_tnl **tp = ip6_tnl_bucket(ip6n, &t->parms);
 
+	spin_lock_bh(&ip6_tnl_lock);
 	t->next = *tp;
-	write_lock_bh(&ip6_tnl_lock);
-	*tp = t;
-	write_unlock_bh(&ip6_tnl_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ip6_tnl_lock);
 }
 
 /**
@@ -204,9 +210,9 @@
 
 	for (tp = ip6_tnl_bucket(ip6n, &t->parms); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ip6_tnl_lock);
+			spin_lock_bh(&ip6_tnl_lock);
 			*tp = t->next;
-			write_unlock_bh(&ip6_tnl_lock);
+			spin_unlock_bh(&ip6_tnl_lock);
 			break;
 		}
 	}
@@ -313,9 +319,9 @@
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 
 	if (dev == ip6n->fb_tnl_dev) {
-		write_lock_bh(&ip6_tnl_lock);
+		spin_lock_bh(&ip6_tnl_lock);
 		ip6n->tnls_wc[0] = NULL;
-		write_unlock_bh(&ip6_tnl_lock);
+		spin_unlock_bh(&ip6_tnl_lock);
 	} else {
 		ip6_tnl_unlink(ip6n, t);
 	}
@@ -409,7 +415,7 @@
 	   in trouble since we might need the source address for further
 	   processing of the error. */
 
-	read_lock(&ip6_tnl_lock);
+	rcu_read_lock();
 	if ((t = ip6_tnl_lookup(dev_net(skb->dev), &ipv6h->daddr,
 					&ipv6h->saddr)) == NULL)
 		goto out;
@@ -482,7 +488,7 @@
 	*msg = rel_msg;
 
 out:
-	read_unlock(&ip6_tnl_lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -652,6 +658,7 @@
 		IP6_ECN_set_ce(ipv6_hdr(skb));
 }
 
+/* called with rcu_read_lock() */
 static inline int ip6_tnl_rcv_ctl(struct ip6_tnl *t)
 {
 	struct ip6_tnl_parm *p = &t->parms;
@@ -662,15 +669,13 @@
 		struct net_device *ldev = NULL;
 
 		if (p->link)
-			ldev = dev_get_by_index(net, p->link);
+			ldev = dev_get_by_index_rcu(net, p->link);
 
 		if ((ipv6_addr_is_multicast(&p->laddr) ||
 		     likely(ipv6_chk_addr(net, &p->laddr, ldev, 0))) &&
 		    likely(!ipv6_chk_addr(net, &p->raddr, NULL, 0)))
 			ret = 1;
 
-		if (ldev)
-			dev_put(ldev);
 	}
 	return ret;
 }
@@ -693,23 +698,23 @@
 	struct ip6_tnl *t;
 	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
 
-	read_lock(&ip6_tnl_lock);
+	rcu_read_lock();
 
 	if ((t = ip6_tnl_lookup(dev_net(skb->dev), &ipv6h->saddr,
 					&ipv6h->daddr)) != NULL) {
 		if (t->parms.proto != ipproto && t->parms.proto != 0) {
-			read_unlock(&ip6_tnl_lock);
+			rcu_read_unlock();
 			goto discard;
 		}
 
 		if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
-			read_unlock(&ip6_tnl_lock);
+			rcu_read_unlock();
 			goto discard;
 		}
 
 		if (!ip6_tnl_rcv_ctl(t)) {
 			t->dev->stats.rx_dropped++;
-			read_unlock(&ip6_tnl_lock);
+			rcu_read_unlock();
 			goto discard;
 		}
 		secpath_reset(skb);
@@ -727,10 +732,10 @@
 		t->dev->stats.rx_packets++;
 		t->dev->stats.rx_bytes += skb->len;
 		netif_rx(skb);
-		read_unlock(&ip6_tnl_lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	read_unlock(&ip6_tnl_lock);
+	rcu_read_unlock();
 	return 1;
 
 discard:
@@ -798,8 +803,9 @@
 	if (p->flags & IP6_TNL_F_CAP_XMIT) {
 		struct net_device *ldev = NULL;
 
+		rcu_read_lock();
 		if (p->link)
-			ldev = dev_get_by_index(net, p->link);
+			ldev = dev_get_by_index_rcu(net, p->link);
 
 		if (unlikely(!ipv6_chk_addr(net, &p->laddr, ldev, 0)))
 			printk(KERN_WARNING
@@ -813,8 +819,7 @@
 			       p->name);
 		else
 			ret = 1;
-		if (ldev)
-			dev_put(ldev);
+		rcu_read_unlock();
 	}
 	return ret;
 }
@@ -1387,29 +1392,25 @@
 {
 	int h;
 	struct ip6_tnl *t;
+	LIST_HEAD(list);
 
 	for (h = 0; h < HASH_SIZE; h++) {
-		while ((t = ip6n->tnls_r_l[h]) != NULL)
-			unregister_netdevice(t->dev);
+		t = ip6n->tnls_r_l[h];
+		while (t != NULL) {
+			unregister_netdevice_queue(t->dev, &list);
+			t = t->next;
+		}
 	}
 
 	t = ip6n->tnls_wc[0];
-	unregister_netdevice(t->dev);
+	unregister_netdevice_queue(t->dev, &list);
+	unregister_netdevice_many(&list);
 }
 
 static int ip6_tnl_init_net(struct net *net)
 {
+	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 	int err;
-	struct ip6_tnl_net *ip6n;
-
-	err = -ENOMEM;
-	ip6n = kzalloc(sizeof(struct ip6_tnl_net), GFP_KERNEL);
-	if (ip6n == NULL)
-		goto err_alloc;
-
-	err = net_assign_generic(net, ip6_tnl_net_id, ip6n);
-	if (err < 0)
-		goto err_assign;
 
 	ip6n->tnls[0] = ip6n->tnls_wc;
 	ip6n->tnls[1] = ip6n->tnls_r_l;
@@ -1432,27 +1433,23 @@
 err_register:
 	free_netdev(ip6n->fb_tnl_dev);
 err_alloc_dev:
-	/* nothing */
-err_assign:
-	kfree(ip6n);
-err_alloc:
 	return err;
 }
 
 static void ip6_tnl_exit_net(struct net *net)
 {
-	struct ip6_tnl_net *ip6n;
+	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 
-	ip6n = net_generic(net, ip6_tnl_net_id);
 	rtnl_lock();
 	ip6_tnl_destroy_tunnels(ip6n);
 	rtnl_unlock();
-	kfree(ip6n);
 }
 
 static struct pernet_operations ip6_tnl_net_ops = {
 	.init = ip6_tnl_init_net,
 	.exit = ip6_tnl_exit_net,
+	.id   = &ip6_tnl_net_id,
+	.size = sizeof(struct ip6_tnl_net),
 };
 
 /**
@@ -1477,7 +1474,7 @@
 		goto unreg_ip4ip6;
 	}
 
-	err = register_pernet_gen_device(&ip6_tnl_net_id, &ip6_tnl_net_ops);
+	err = register_pernet_device(&ip6_tnl_net_ops);
 	if (err < 0)
 		goto err_pernet;
 	return 0;
@@ -1501,7 +1498,7 @@
 	if (xfrm6_tunnel_deregister(&ip6ip6_handler, AF_INET6))
 		printk(KERN_INFO "ip6_tunnel close: can't deregister ip6ip6\n");
 
-	unregister_pernet_gen_device(ip6_tnl_net_id, &ip6_tnl_net_ops);
+	unregister_pernet_device(&ip6_tnl_net_ops);
 }
 
 module_init(ip6_tunnel_init);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 7161539..52e0f74 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -477,7 +477,7 @@
  *	Delete a VIF entry
  */
 
-static int mif6_delete(struct net *net, int vifi)
+static int mif6_delete(struct net *net, int vifi, struct list_head *head)
 {
 	struct mif_device *v;
 	struct net_device *dev;
@@ -519,7 +519,7 @@
 		in6_dev->cnf.mc_forwarding--;
 
 	if (v->flags & MIFF_REGISTER)
-		unregister_netdevice(dev);
+		unregister_netdevice_queue(dev, head);
 
 	dev_put(dev);
 	return 0;
@@ -976,6 +976,7 @@
 	struct net *net = dev_net(dev);
 	struct mif_device *v;
 	int ct;
+	LIST_HEAD(list);
 
 	if (event != NETDEV_UNREGISTER)
 		return NOTIFY_DONE;
@@ -983,8 +984,10 @@
 	v = &net->ipv6.vif6_table[0];
 	for (ct = 0; ct < net->ipv6.maxvif; ct++, v++) {
 		if (v->dev == dev)
-			mif6_delete(net, ct);
+			mif6_delete(net, ct, &list);
 	}
+	unregister_netdevice_many(&list);
+
 	return NOTIFY_DONE;
 }
 
@@ -1188,14 +1191,16 @@
 static void mroute_clean_tables(struct net *net)
 {
 	int i;
+	LIST_HEAD(list);
 
 	/*
 	 *	Shut down all active vif entries
 	 */
 	for (i = 0; i < net->ipv6.maxvif; i++) {
 		if (!(net->ipv6.vif6_table[i].flags & VIFF_STATIC))
-			mif6_delete(net, i);
+			mif6_delete(net, i, &list);
 	}
+	unregister_netdevice_many(&list);
 
 	/*
 	 *	Wipe the cache
@@ -1297,7 +1302,7 @@
 	switch (optname) {
 	case MRT6_INIT:
 		if (sk->sk_type != SOCK_RAW ||
-		    inet_sk(sk)->num != IPPROTO_ICMPV6)
+		    inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 			return -EOPNOTSUPP;
 		if (optlen < sizeof(int))
 			return -EINVAL;
@@ -1325,7 +1330,7 @@
 		if (copy_from_user(&mifi, optval, sizeof(mifi_t)))
 			return -EFAULT;
 		rtnl_lock();
-		ret = mif6_delete(net, mifi);
+		ret = mif6_delete(net, mifi, NULL);
 		rtnl_unlock();
 		return ret;
 
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 4f7aaf6..430454e 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -64,7 +64,7 @@
 	struct ip6_ra_chain *ra, *new_ra, **rap;
 
 	/* RA packet may be delivered ONLY to IPPROTO_RAW socket */
-	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW)
+	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->inet_num != IPPROTO_RAW)
 		return -ENOPROTOOPT;
 
 	new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
@@ -106,7 +106,7 @@
 	if (inet_sk(sk)->is_icsk) {
 		if (opt &&
 		    !((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE)) &&
-		    inet_sk(sk)->daddr != LOOPBACK4_IPV6) {
+		    inet_sk(sk)->inet_daddr != LOOPBACK4_IPV6) {
 			struct inet_connection_sock *icsk = inet_csk(sk);
 			icsk->icsk_ext_hdr_len = opt->opt_flen + opt->opt_nflen;
 			icsk->icsk_sync_mss(sk, icsk->icsk_pmtu_cookie);
@@ -234,7 +234,7 @@
 
 	case IPV6_V6ONLY:
 		if (optlen < sizeof(int) ||
-		    inet_sk(sk)->num)
+		    inet_sk(sk)->inet_num)
 			goto e_inval;
 		np->ipv6only = valbool;
 		retv = 0;
@@ -424,6 +424,7 @@
 
 		fl.fl6_flowlabel = 0;
 		fl.oif = sk->sk_bound_dev_if;
+		fl.mark = sk->sk_mark;
 
 		if (optlen == 0)
 			goto update;
@@ -665,7 +666,7 @@
 	case IPV6_MTU_DISCOVER:
 		if (optlen < sizeof(int))
 			goto e_inval;
-		if (val<0 || val>3)
+		if (val < IP_PMTUDISC_DONT || val > IP_PMTUDISC_PROBE)
 			goto e_inval;
 		np->pmtudisc = val;
 		retv = 0;
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index f9fcf69..1f9c444 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -2375,9 +2375,9 @@
 	struct net *net = seq_file_net(seq);
 
 	state->idev = NULL;
-	for_each_netdev(net, state->dev) {
+	for_each_netdev_rcu(net, state->dev) {
 		struct inet6_dev *idev;
-		idev = in6_dev_get(state->dev);
+		idev = __in6_dev_get(state->dev);
 		if (!idev)
 			continue;
 		read_lock_bh(&idev->lock);
@@ -2387,7 +2387,6 @@
 			break;
 		}
 		read_unlock_bh(&idev->lock);
-		in6_dev_put(idev);
 	}
 	return im;
 }
@@ -2398,16 +2397,15 @@
 
 	im = im->next;
 	while (!im) {
-		if (likely(state->idev != NULL)) {
+		if (likely(state->idev != NULL))
 			read_unlock_bh(&state->idev->lock);
-			in6_dev_put(state->idev);
-		}
-		state->dev = next_net_device(state->dev);
+
+		state->dev = next_net_device_rcu(state->dev);
 		if (!state->dev) {
 			state->idev = NULL;
 			break;
 		}
-		state->idev = in6_dev_get(state->dev);
+		state->idev = __in6_dev_get(state->dev);
 		if (!state->idev)
 			continue;
 		read_lock_bh(&state->idev->lock);
@@ -2426,31 +2424,31 @@
 }
 
 static void *igmp6_mc_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(RCU)
 {
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	return igmp6_mc_get_idx(seq, *pos);
 }
 
 static void *igmp6_mc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
-	struct ifmcaddr6 *im;
-	im = igmp6_mc_get_next(seq, v);
+	struct ifmcaddr6 *im = igmp6_mc_get_next(seq, v);
+
 	++*pos;
 	return im;
 }
 
 static void igmp6_mc_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(RCU)
 {
 	struct igmp6_mc_iter_state *state = igmp6_mc_seq_private(seq);
+
 	if (likely(state->idev != NULL)) {
 		read_unlock_bh(&state->idev->lock);
-		in6_dev_put(state->idev);
 		state->idev = NULL;
 	}
 	state->dev = NULL;
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int igmp6_mc_seq_show(struct seq_file *seq, void *v)
@@ -2507,9 +2505,9 @@
 
 	state->idev = NULL;
 	state->im = NULL;
-	for_each_netdev(net, state->dev) {
+	for_each_netdev_rcu(net, state->dev) {
 		struct inet6_dev *idev;
-		idev = in6_dev_get(state->dev);
+		idev = __in6_dev_get(state->dev);
 		if (unlikely(idev == NULL))
 			continue;
 		read_lock_bh(&idev->lock);
@@ -2525,7 +2523,6 @@
 			spin_unlock_bh(&im->mca_lock);
 		}
 		read_unlock_bh(&idev->lock);
-		in6_dev_put(idev);
 	}
 	return psf;
 }
@@ -2539,16 +2536,15 @@
 		spin_unlock_bh(&state->im->mca_lock);
 		state->im = state->im->next;
 		while (!state->im) {
-			if (likely(state->idev != NULL)) {
+			if (likely(state->idev != NULL))
 				read_unlock_bh(&state->idev->lock);
-				in6_dev_put(state->idev);
-			}
-			state->dev = next_net_device(state->dev);
+
+			state->dev = next_net_device_rcu(state->dev);
 			if (!state->dev) {
 				state->idev = NULL;
 				goto out;
 			}
-			state->idev = in6_dev_get(state->dev);
+			state->idev = __in6_dev_get(state->dev);
 			if (!state->idev)
 				continue;
 			read_lock_bh(&state->idev->lock);
@@ -2573,9 +2569,9 @@
 }
 
 static void *igmp6_mcf_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(RCU)
 {
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	return *pos ? igmp6_mcf_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
 }
 
@@ -2591,7 +2587,7 @@
 }
 
 static void igmp6_mcf_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(RCU)
 {
 	struct igmp6_mcf_iter_state *state = igmp6_mcf_seq_private(seq);
 	if (likely(state->im != NULL)) {
@@ -2600,11 +2596,10 @@
 	}
 	if (likely(state->idev != NULL)) {
 		read_unlock_bh(&state->idev->lock);
-		in6_dev_put(state->idev);
 		state->idev = NULL;
 	}
 	state->dev = NULL;
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int igmp6_mcf_seq_show(struct seq_file *seq, void *v)
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index f74e4e2..c4585279 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -598,6 +598,7 @@
 	icmp6h.icmp6_solicited = solicited;
 	icmp6h.icmp6_override = override;
 
+	inc_opt |= ifp->idev->cnf.force_tllao;
 	__ndisc_send(dev, neigh, daddr, src_addr,
 		     &icmp6h, solicited_addr,
 		     inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
@@ -1768,42 +1769,6 @@
 	return ret;
 }
 
-int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl,
-				 void __user *oldval, size_t __user *oldlenp,
-				 void __user *newval, size_t newlen)
-{
-	struct net_device *dev = ctl->extra1;
-	struct inet6_dev *idev;
-	int ret;
-
-	if (ctl->ctl_name == NET_NEIGH_RETRANS_TIME ||
-	    ctl->ctl_name == NET_NEIGH_REACHABLE_TIME)
-		ndisc_warn_deprecated_sysctl(ctl, "procfs", dev ? dev->name : "default");
-
-	switch (ctl->ctl_name) {
-	case NET_NEIGH_REACHABLE_TIME:
-		ret = sysctl_jiffies(ctl, oldval, oldlenp, newval, newlen);
-		break;
-	case NET_NEIGH_RETRANS_TIME_MS:
-	case NET_NEIGH_REACHABLE_TIME_MS:
-		 ret = sysctl_ms_jiffies(ctl, oldval, oldlenp, newval, newlen);
-		 break;
-	default:
-		ret = 0;
-	}
-
-	if (newval && newlen && ret > 0 &&
-	    dev && (idev = in6_dev_get(dev)) != NULL) {
-		if (ctl->ctl_name == NET_NEIGH_REACHABLE_TIME ||
-		    ctl->ctl_name == NET_NEIGH_REACHABLE_TIME_MS)
-			idev->nd_parms->reachable_time = neigh_rand_reach_time(idev->nd_parms->base_reachable_time);
-		idev->tstamp = jiffies;
-		inet6_ifinfo_notify(RTM_NEWLINK, idev);
-		in6_dev_put(idev);
-	}
-
-	return ret;
-}
 
 #endif
 
@@ -1857,8 +1822,7 @@
 #ifdef CONFIG_SYSCTL
 	err = neigh_sysctl_register(NULL, &nd_tbl.parms, NET_IPV6,
 				    NET_IPV6_NEIGH, "ipv6",
-				    &ndisc_ifinfo_sysctl_change,
-				    &ndisc_ifinfo_sysctl_strategy);
+				    &ndisc_ifinfo_sysctl_change);
 	if (err)
 		goto out_unregister_pernet;
 #endif
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 1cf3f0c..7854052 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -36,7 +36,6 @@
 
 #define IPQ_QMAX_DEFAULT 1024
 #define IPQ_PROC_FS_NAME "ip6_queue"
-#define NET_IPQ_QMAX 2088
 #define NET_IPQ_QMAX_NAME "ip6_queue_maxlen"
 
 typedef int (*ipq_cmpfn)(struct nf_queue_entry *, unsigned long);
@@ -499,10 +498,9 @@
 {
 	struct netlink_notify *n = ptr;
 
-	if (event == NETLINK_URELEASE &&
-	    n->protocol == NETLINK_IP6_FW && n->pid) {
+	if (event == NETLINK_URELEASE && n->protocol == NETLINK_IP6_FW) {
 		write_lock_bh(&queue_lock);
-		if ((n->net == &init_net) && (n->pid == peer_pid))
+		if ((net_eq(n->net, &init_net)) && (n->pid == peer_pid))
 			__ipq_reset();
 		write_unlock_bh(&queue_lock);
 	}
@@ -518,14 +516,13 @@
 
 static ctl_table ipq_table[] = {
 	{
-		.ctl_name	= NET_IPQ_QMAX,
 		.procname	= NET_IPQ_QMAX_NAME,
 		.data		= &queue_maxlen,
 		.maxlen		= sizeof(queue_maxlen),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
@@ -625,7 +622,7 @@
 static void __exit ip6_queue_fini(void)
 {
 	nf_unregister_queue_handlers(&nfqh);
-	synchronize_net();
+
 	ipq_flush(NULL, 0);
 
 #ifdef CONFIG_SYSCTL
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index cc9f8ef..480d7f8 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -105,9 +105,9 @@
 #define FWINV(bool, invflg) ((bool) ^ !!(ip6info->invflags & (invflg)))
 
 	if (FWINV(ipv6_masked_addr_cmp(&ipv6->saddr, &ip6info->smsk,
-				       &ip6info->src), IP6T_INV_SRCIP)
-	    || FWINV(ipv6_masked_addr_cmp(&ipv6->daddr, &ip6info->dmsk,
-					  &ip6info->dst), IP6T_INV_DSTIP)) {
+				       &ip6info->src), IP6T_INV_SRCIP) ||
+	    FWINV(ipv6_masked_addr_cmp(&ipv6->daddr, &ip6info->dmsk,
+				       &ip6info->dst), IP6T_INV_DSTIP)) {
 		dprintf("Source or dest mismatch.\n");
 /*
 		dprintf("SRC: %u. Mask: %u. Target: %u.%s\n", ip->saddr,
@@ -277,11 +277,11 @@
 	} else if (s == e) {
 		(*rulenum)++;
 
-		if (s->target_offset == sizeof(struct ip6t_entry)
-		   && strcmp(t->target.u.kernel.target->name,
-			     IP6T_STANDARD_TARGET) == 0
-		   && t->verdict < 0
-		   && unconditional(&s->ipv6)) {
+		if (s->target_offset == sizeof(struct ip6t_entry) &&
+		    strcmp(t->target.u.kernel.target->name,
+			   IP6T_STANDARD_TARGET) == 0 &&
+		    t->verdict < 0 &&
+		    unconditional(&s->ipv6)) {
 			/* Tail of chains: STANDARD target (return/policy) */
 			*comment = *chainname == hookname
 				? comments[NF_IP6_TRACE_COMMENT_POLICY]
@@ -418,8 +418,8 @@
 				back = get_entry(table_base, back->comefrom);
 				continue;
 			}
-			if (table_base + v != ip6t_next_entry(e)
-			    && !(e->ipv6.flags & IP6T_F_GOTO)) {
+			if (table_base + v != ip6t_next_entry(e) &&
+			    !(e->ipv6.flags & IP6T_F_GOTO)) {
 				/* Save old back ptr in next entry */
 				struct ip6t_entry *next = ip6t_next_entry(e);
 				next->comefrom = (void *)back - table_base;
@@ -505,11 +505,11 @@
 			e->comefrom |= ((1 << hook) | (1 << NF_INET_NUMHOOKS));
 
 			/* Unconditional return/END. */
-			if ((e->target_offset == sizeof(struct ip6t_entry)
-			    && (strcmp(t->target.u.user.name,
-				       IP6T_STANDARD_TARGET) == 0)
-			    && t->verdict < 0
-			    && unconditional(&e->ipv6)) || visited) {
+			if ((e->target_offset == sizeof(struct ip6t_entry) &&
+			     (strcmp(t->target.u.user.name,
+				     IP6T_STANDARD_TARGET) == 0) &&
+			     t->verdict < 0 &&
+			     unconditional(&e->ipv6)) || visited) {
 				unsigned int oldpos, size;
 
 				if ((strcmp(t->target.u.user.name,
@@ -556,8 +556,8 @@
 				int newpos = t->verdict;
 
 				if (strcmp(t->target.u.user.name,
-					   IP6T_STANDARD_TARGET) == 0
-				    && newpos >= 0) {
+					   IP6T_STANDARD_TARGET) == 0 &&
+				    newpos >= 0) {
 					if (newpos > newinfo->size -
 						sizeof(struct ip6t_entry)) {
 						duprintf("mark_source_chains: "
@@ -767,8 +767,8 @@
 {
 	unsigned int h;
 
-	if ((unsigned long)e % __alignof__(struct ip6t_entry) != 0
-	    || (unsigned char *)e + sizeof(struct ip6t_entry) >= limit) {
+	if ((unsigned long)e % __alignof__(struct ip6t_entry) != 0 ||
+	    (unsigned char *)e + sizeof(struct ip6t_entry) >= limit) {
 		duprintf("Bad offset %p\n", e);
 		return -EINVAL;
 	}
@@ -1584,8 +1584,8 @@
 	int ret, off, h;
 
 	duprintf("check_compat_entry_size_and_hooks %p\n", e);
-	if ((unsigned long)e % __alignof__(struct compat_ip6t_entry) != 0
-	    || (unsigned char *)e + sizeof(struct compat_ip6t_entry) >= limit) {
+	if ((unsigned long)e % __alignof__(struct compat_ip6t_entry) != 0 ||
+	    (unsigned char *)e + sizeof(struct compat_ip6t_entry) >= limit) {
 		duprintf("Bad offset %p, limit = %p\n", e, limit);
 		return -EINVAL;
 	}
diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c
index 7018cac..b285fdf 100644
--- a/net/ipv6/netfilter/ip6t_LOG.c
+++ b/net/ipv6/netfilter/ip6t_LOG.c
@@ -249,8 +249,8 @@
 		/* Max length: 11 "URGP=65535 " */
 		printk("URGP=%u ", ntohs(th->urg_ptr));
 
-		if ((logflags & IP6T_LOG_TCPOPT)
-		    && th->doff * 4 > sizeof(struct tcphdr)) {
+		if ((logflags & IP6T_LOG_TCPOPT) &&
+		    th->doff * 4 > sizeof(struct tcphdr)) {
 			u_int8_t _opt[60 - sizeof(struct tcphdr)];
 			const u_int8_t *op;
 			unsigned int i;
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 5a7f00c..8311ca3 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -223,8 +223,8 @@
 		return false;
 	} else if (rejinfo->with == IP6T_TCP_RESET) {
 		/* Must specify that it's a TCP packet */
-		if (e->ipv6.proto != IPPROTO_TCP
-		    || (e->ipv6.invflags & XT_INV_PROTO)) {
+		if (e->ipv6.proto != IPPROTO_TCP ||
+		    (e->ipv6.invflags & XT_INV_PROTO)) {
 			printk("ip6t_REJECT: TCP_RESET illegal for non-tcp\n");
 			return false;
 		}
diff --git a/net/ipv6/netfilter/ip6t_ah.c b/net/ipv6/netfilter/ip6t_ah.c
index 3a82f24..ac0b7c6 100644
--- a/net/ipv6/netfilter/ip6t_ah.c
+++ b/net/ipv6/netfilter/ip6t_ah.c
@@ -77,17 +77,14 @@
 		 ahinfo->hdrres, ah->reserved,
 		 !(ahinfo->hdrres && ah->reserved));
 
-	return (ah != NULL)
-	       &&
-	       spi_match(ahinfo->spis[0], ahinfo->spis[1],
-			 ntohl(ah->spi),
-			 !!(ahinfo->invflags & IP6T_AH_INV_SPI))
-	       &&
-	       (!ahinfo->hdrlen ||
-		(ahinfo->hdrlen == hdrlen) ^
-		!!(ahinfo->invflags & IP6T_AH_INV_LEN))
-	       &&
-	       !(ahinfo->hdrres && ah->reserved);
+	return (ah != NULL) &&
+		spi_match(ahinfo->spis[0], ahinfo->spis[1],
+			  ntohl(ah->spi),
+			  !!(ahinfo->invflags & IP6T_AH_INV_SPI)) &&
+		(!ahinfo->hdrlen ||
+		 (ahinfo->hdrlen == hdrlen) ^
+		 !!(ahinfo->invflags & IP6T_AH_INV_LEN)) &&
+		!(ahinfo->hdrres && ah->reserved);
 }
 
 static bool ah_mt6_check(const struct xt_mtchk_param *par)
diff --git a/net/ipv6/netfilter/ip6t_frag.c b/net/ipv6/netfilter/ip6t_frag.c
index 673aa0a..7b91c25 100644
--- a/net/ipv6/netfilter/ip6t_frag.c
+++ b/net/ipv6/netfilter/ip6t_frag.c
@@ -70,41 +70,36 @@
 	pr_debug("res %02X %02X%04X %02X ",
 		 fraginfo->flags & IP6T_FRAG_RES, fh->reserved,
 		 ntohs(fh->frag_off) & 0x6,
-		 !((fraginfo->flags & IP6T_FRAG_RES)
-		   && (fh->reserved || (ntohs(fh->frag_off) & 0x06))));
+		 !((fraginfo->flags & IP6T_FRAG_RES) &&
+		   (fh->reserved || (ntohs(fh->frag_off) & 0x06))));
 	pr_debug("first %02X %02X %02X ",
 		 fraginfo->flags & IP6T_FRAG_FST,
 		 ntohs(fh->frag_off) & ~0x7,
-		 !((fraginfo->flags & IP6T_FRAG_FST)
-		   && (ntohs(fh->frag_off) & ~0x7)));
+		 !((fraginfo->flags & IP6T_FRAG_FST) &&
+		   (ntohs(fh->frag_off) & ~0x7)));
 	pr_debug("mf %02X %02X %02X ",
 		 fraginfo->flags & IP6T_FRAG_MF,
 		 ntohs(fh->frag_off) & IP6_MF,
-		 !((fraginfo->flags & IP6T_FRAG_MF)
-		   && !((ntohs(fh->frag_off) & IP6_MF))));
+		 !((fraginfo->flags & IP6T_FRAG_MF) &&
+		   !((ntohs(fh->frag_off) & IP6_MF))));
 	pr_debug("last %02X %02X %02X\n",
 		 fraginfo->flags & IP6T_FRAG_NMF,
 		 ntohs(fh->frag_off) & IP6_MF,
-		 !((fraginfo->flags & IP6T_FRAG_NMF)
-		   && (ntohs(fh->frag_off) & IP6_MF)));
+		 !((fraginfo->flags & IP6T_FRAG_NMF) &&
+		   (ntohs(fh->frag_off) & IP6_MF)));
 
-	return (fh != NULL)
-	       &&
-	       id_match(fraginfo->ids[0], fraginfo->ids[1],
-			ntohl(fh->identification),
-			!!(fraginfo->invflags & IP6T_FRAG_INV_IDS))
-	       &&
-	       !((fraginfo->flags & IP6T_FRAG_RES)
-		 && (fh->reserved || (ntohs(fh->frag_off) & 0x6)))
-	       &&
-	       !((fraginfo->flags & IP6T_FRAG_FST)
-		 && (ntohs(fh->frag_off) & ~0x7))
-	       &&
-	       !((fraginfo->flags & IP6T_FRAG_MF)
-		 && !(ntohs(fh->frag_off) & IP6_MF))
-	       &&
-	       !((fraginfo->flags & IP6T_FRAG_NMF)
-		 && (ntohs(fh->frag_off) & IP6_MF));
+	return (fh != NULL) &&
+		id_match(fraginfo->ids[0], fraginfo->ids[1],
+			 ntohl(fh->identification),
+			 !!(fraginfo->invflags & IP6T_FRAG_INV_IDS)) &&
+		!((fraginfo->flags & IP6T_FRAG_RES) &&
+		  (fh->reserved || (ntohs(fh->frag_off) & 0x6))) &&
+		!((fraginfo->flags & IP6T_FRAG_FST) &&
+		  (ntohs(fh->frag_off) & ~0x7)) &&
+		!((fraginfo->flags & IP6T_FRAG_MF) &&
+		  !(ntohs(fh->frag_off) & IP6_MF)) &&
+		!((fraginfo->flags & IP6T_FRAG_NMF) &&
+		  (ntohs(fh->frag_off) & IP6_MF));
 }
 
 static bool frag_mt6_check(const struct xt_mtchk_param *par)
diff --git a/net/ipv6/netfilter/ip6t_rt.c b/net/ipv6/netfilter/ip6t_rt.c
index 356b8d6..b77307f 100644
--- a/net/ipv6/netfilter/ip6t_rt.c
+++ b/net/ipv6/netfilter/ip6t_rt.c
@@ -92,16 +92,13 @@
 		 !((rtinfo->flags & IP6T_RT_RES) &&
 		   (((const struct rt0_hdr *)rh)->reserved)));
 
-	ret = (rh != NULL)
-	      &&
+	ret = (rh != NULL) &&
 	      (segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1],
 			      rh->segments_left,
-			      !!(rtinfo->invflags & IP6T_RT_INV_SGS)))
-	      &&
+			      !!(rtinfo->invflags & IP6T_RT_INV_SGS))) &&
 	      (!(rtinfo->flags & IP6T_RT_LEN) ||
 	       ((rtinfo->hdrlen == hdrlen) ^
-		!!(rtinfo->invflags & IP6T_RT_INV_LEN)))
-	      &&
+		!!(rtinfo->invflags & IP6T_RT_INV_LEN))) &&
 	      (!(rtinfo->flags & IP6T_RT_TYP) ||
 	       ((rtinfo->rt_type == rh->type) ^
 		!!(rtinfo->invflags & IP6T_RT_INV_TYP)));
diff --git a/net/ipv6/netfilter/ip6table_filter.c b/net/ipv6/netfilter/ip6table_filter.c
index 6f4383a..ad378ef 100644
--- a/net/ipv6/netfilter/ip6table_filter.c
+++ b/net/ipv6/netfilter/ip6table_filter.c
@@ -79,8 +79,8 @@
 {
 #if 0
 	/* root is playing with raw sockets. */
-	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr)) {
+	if (skb->len < sizeof(struct iphdr) ||
+	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
 		if (net_ratelimit())
 			printk("ip6t_hook: happy cracking.\n");
 		return NF_ACCEPT;
diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c
index 0ad9143..a929c19 100644
--- a/net/ipv6/netfilter/ip6table_mangle.c
+++ b/net/ipv6/netfilter/ip6table_mangle.c
@@ -102,8 +102,8 @@
 
 #if 0
 	/* root is playing with raw sockets. */
-	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr)) {
+	if (skb->len < sizeof(struct iphdr) ||
+	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
 		if (net_ratelimit())
 			printk("ip6t_hook: happy cracking.\n");
 		return NF_ACCEPT;
@@ -122,11 +122,11 @@
 	ret = ip6t_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv6.ip6table_mangle);
 
-	if (ret != NF_DROP && ret != NF_STOLEN
-		&& (memcmp(&ipv6_hdr(skb)->saddr, &saddr, sizeof(saddr))
-		    || memcmp(&ipv6_hdr(skb)->daddr, &daddr, sizeof(daddr))
-		    || skb->mark != mark
-		    || ipv6_hdr(skb)->hop_limit != hop_limit))
+	if (ret != NF_DROP && ret != NF_STOLEN &&
+	    (memcmp(&ipv6_hdr(skb)->saddr, &saddr, sizeof(saddr)) ||
+	     memcmp(&ipv6_hdr(skb)->daddr, &daddr, sizeof(daddr)) ||
+	     skb->mark != mark ||
+	     ipv6_hdr(skb)->hop_limit != hop_limit))
 		return ip6_route_me_harder(skb) == 0 ? ret : NF_DROP;
 
 	return ret;
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index 642dcb1..c7b8bd1 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -244,18 +244,18 @@
 static int icmpv6_nlattr_to_tuple(struct nlattr *tb[],
 				struct nf_conntrack_tuple *tuple)
 {
-	if (!tb[CTA_PROTO_ICMPV6_TYPE]
-	    || !tb[CTA_PROTO_ICMPV6_CODE]
-	    || !tb[CTA_PROTO_ICMPV6_ID])
+	if (!tb[CTA_PROTO_ICMPV6_TYPE] ||
+	    !tb[CTA_PROTO_ICMPV6_CODE] ||
+	    !tb[CTA_PROTO_ICMPV6_ID])
 		return -EINVAL;
 
 	tuple->dst.u.icmp.type = nla_get_u8(tb[CTA_PROTO_ICMPV6_TYPE]);
 	tuple->dst.u.icmp.code = nla_get_u8(tb[CTA_PROTO_ICMPV6_CODE]);
 	tuple->src.u.icmp.id = nla_get_be16(tb[CTA_PROTO_ICMPV6_ID]);
 
-	if (tuple->dst.u.icmp.type < 128
-	    || tuple->dst.u.icmp.type - 128 >= sizeof(invmap)
-	    || !invmap[tuple->dst.u.icmp.type - 128])
+	if (tuple->dst.u.icmp.type < 128 ||
+	    tuple->dst.u.icmp.type - 128 >= sizeof(invmap) ||
+	    !invmap[tuple->dst.u.icmp.type - 128])
 		return -EINVAL;
 
 	return 0;
@@ -277,9 +277,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #endif /* CONFIG_SYSCTL */
 
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index f3aba25..e0b9424 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -83,7 +83,6 @@
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_FRAG6_LOW_THRESH,
 		.procname	= "nf_conntrack_frag6_low_thresh",
 		.data		= &nf_init_frags.low_thresh,
 		.maxlen		= sizeof(unsigned int),
@@ -91,14 +90,13 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_FRAG6_HIGH_THRESH,
 		.procname	= "nf_conntrack_frag6_high_thresh",
 		.data		= &nf_init_frags.high_thresh,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 #endif
 
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 4f24570..926ce8e 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -72,7 +72,7 @@
 	int is_multicast = ipv6_addr_is_multicast(loc_addr);
 
 	sk_for_each_from(sk, node)
-		if (inet_sk(sk)->num == num) {
+		if (inet_sk(sk)->inet_num == num) {
 			struct ipv6_pinfo *np = inet6_sk(sk);
 
 			if (!net_eq(sock_net(sk), net))
@@ -249,7 +249,7 @@
 
 	/* Raw sockets are IPv6 only */
 	if (addr_type == IPV6_ADDR_MAPPED)
-		return(-EADDRNOTAVAIL);
+		return -EADDRNOTAVAIL;
 
 	lock_sock(sk);
 
@@ -257,6 +257,7 @@
 	if (sk->sk_state != TCP_CLOSE)
 		goto out;
 
+	rcu_read_lock();
 	/* Check if the address belongs to the host. */
 	if (addr_type != IPV6_ADDR_ANY) {
 		struct net_device *dev = NULL;
@@ -272,13 +273,13 @@
 
 			/* Binding to link-local address requires an interface */
 			if (!sk->sk_bound_dev_if)
-				goto out;
+				goto out_unlock;
 
-			dev = dev_get_by_index(sock_net(sk), sk->sk_bound_dev_if);
-			if (!dev) {
-				err = -ENODEV;
-				goto out;
-			}
+			err = -ENODEV;
+			dev = dev_get_by_index_rcu(sock_net(sk),
+						   sk->sk_bound_dev_if);
+			if (!dev)
+				goto out_unlock;
 		}
 
 		/* ipv4 addr of the socket is invalid.  Only the
@@ -289,20 +290,18 @@
 			err = -EADDRNOTAVAIL;
 			if (!ipv6_chk_addr(sock_net(sk), &addr->sin6_addr,
 					   dev, 0)) {
-				if (dev)
-					dev_put(dev);
-				goto out;
+				goto out_unlock;
 			}
 		}
-		if (dev)
-			dev_put(dev);
 	}
 
-	inet->rcv_saddr = inet->saddr = v4addr;
+	inet->inet_rcv_saddr = inet->inet_saddr = v4addr;
 	ipv6_addr_copy(&np->rcv_saddr, &addr->sin6_addr);
 	if (!(addr_type & IPV6_ADDR_MULTICAST))
 		ipv6_addr_copy(&np->saddr, &addr->sin6_addr);
 	err = 0;
+out_unlock:
+	rcu_read_unlock();
 out:
 	release_sock(sk);
 	return err;
@@ -381,8 +380,7 @@
 	}
 
 	/* Charge it to the socket. */
-	if (sock_queue_rcv_skb(sk,skb)<0) {
-		atomic_inc(&sk->sk_drops);
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
@@ -416,14 +414,14 @@
 				   skb_network_header_len(skb));
 		if (!csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 				     &ipv6_hdr(skb)->daddr,
-				     skb->len, inet->num, skb->csum))
+				     skb->len, inet->inet_num, skb->csum))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 	}
 	if (!skb_csum_unnecessary(skb))
 		skb->csum = ~csum_unfold(csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 							 &ipv6_hdr(skb)->daddr,
 							 skb->len,
-							 inet->num, 0));
+							 inet->inet_num, 0));
 
 	if (inet->hdrincl) {
 		if (skb_checksum_complete(skb)) {
@@ -497,7 +495,7 @@
 			sin6->sin6_scope_id = IP6CB(skb)->iif;
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (np->rxopt.all)
 		datagram_recv_ctl(sk, msg, skb);
@@ -518,7 +516,6 @@
 	   as some normal condition.
 	 */
 	err = (flags&MSG_DONTWAIT) ? -EAGAIN : -EHOSTUNREACH;
-	atomic_inc(&sk->sk_drops);
 	goto out;
 }
 
@@ -766,8 +763,8 @@
 		proto = ntohs(sin6->sin6_port);
 
 		if (!proto)
-			proto = inet->num;
-		else if (proto != inet->num)
+			proto = inet->inet_num;
+		else if (proto != inet->inet_num)
 			return(-EINVAL);
 
 		if (proto > 255)
@@ -800,7 +797,7 @@
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -EDESTADDRREQ;
 
-		proto = inet->num;
+		proto = inet->inet_num;
 		daddr = &np->daddr;
 		fl.fl6_flowlabel = np->flow_label;
 	}
@@ -967,7 +964,7 @@
 
 	switch (optname) {
 		case IPV6_CHECKSUM:
-			if (inet_sk(sk)->num == IPPROTO_ICMPV6 &&
+			if (inet_sk(sk)->inet_num == IPPROTO_ICMPV6 &&
 			    level == IPPROTO_IPV6) {
 				/*
 				 * RFC3542 tells that IPV6_CHECKSUM socket
@@ -1007,7 +1004,7 @@
 			break;
 
 		case SOL_ICMPV6:
-			if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+			if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 				return -EOPNOTSUPP;
 			return rawv6_seticmpfilter(sk, level, optname, optval,
 						   optlen);
@@ -1030,7 +1027,7 @@
 	case SOL_RAW:
 		break;
 	case SOL_ICMPV6:
-		if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 			return -EOPNOTSUPP;
 		return rawv6_seticmpfilter(sk, level, optname, optval, optlen);
 	case SOL_IPV6:
@@ -1087,7 +1084,7 @@
 			break;
 
 		case SOL_ICMPV6:
-			if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+			if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 				return -EOPNOTSUPP;
 			return rawv6_geticmpfilter(sk, level, optname, optval,
 						   optlen);
@@ -1110,7 +1107,7 @@
 	case SOL_RAW:
 		break;
 	case SOL_ICMPV6:
-		if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 			return -EOPNOTSUPP;
 		return rawv6_geticmpfilter(sk, level, optname, optval, optlen);
 	case SOL_IPV6:
@@ -1157,7 +1154,7 @@
 
 static void rawv6_close(struct sock *sk, long timeout)
 {
-	if (inet_sk(sk)->num == IPPROTO_RAW)
+	if (inet_sk(sk)->inet_num == IPPROTO_RAW)
 		ip6_ra_control(sk, -1);
 	ip6mr_sk_done(sk);
 	sk_common_release(sk);
@@ -1176,7 +1173,7 @@
 {
 	struct raw6_sock *rp = raw6_sk(sk);
 
-	switch (inet_sk(sk)->num) {
+	switch (inet_sk(sk)->inet_num) {
 	case IPPROTO_ICMPV6:
 		rp->checksum = 1;
 		rp->offset   = 2;
@@ -1226,7 +1223,7 @@
 	dest  = &np->daddr;
 	src   = &np->rcv_saddr;
 	destp = 0;
-	srcp  = inet_sk(sp)->num;
+	srcp  = inet_sk(sp)->inet_num;
 	seq_printf(seq,
 		   "%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
 		   "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
@@ -1338,7 +1335,6 @@
 	.protocol	= IPPROTO_IP,	/* wild card */
 	.prot		= &rawv6_prot,
 	.ops		= &inet6_sockraw_ops,
-	.capability	= CAP_NET_RAW,
 	.no_check	= UDP_CSUM_DEFAULT,
 	.flags		= INET_PROTOSW_REUSE,
 };
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index da5bd0e..4d98549 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -208,18 +208,17 @@
 	fq_kill(fq);
 
 	net = container_of(fq->q.net, struct net, ipv6.frags);
-	dev = dev_get_by_index(net, fq->iif);
-	if (!dev)
-		goto out;
-
 	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, fq->iif);
+	if (!dev)
+		goto out_rcu_unlock;
+
 	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMTIMEOUT);
 	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
-	rcu_read_unlock();
 
 	/* Don't send error if the first segment did not arrive. */
 	if (!(fq->q.last_in & INET_FRAG_FIRST_IN) || !fq->q.fragments)
-		goto out;
+		goto out_rcu_unlock;
 
 	/*
 	   But use as source device on which LAST ARRIVED
@@ -228,9 +227,9 @@
 	 */
 	fq->q.fragments->dev = dev;
 	icmpv6_send(fq->q.fragments, ICMPV6_TIME_EXCEED, ICMPV6_EXC_FRAGTIME, 0, dev);
+out_rcu_unlock:
+	rcu_read_unlock();
 out:
-	if (dev)
-		dev_put(dev);
 	spin_unlock(&fq->q.lock);
 	fq_put(fq);
 }
@@ -636,7 +635,6 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table ip6_frags_ns_ctl_table[] = {
 	{
-		.ctl_name	= NET_IPV6_IP6FRAG_HIGH_THRESH,
 		.procname	= "ip6frag_high_thresh",
 		.data		= &init_net.ipv6.frags.high_thresh,
 		.maxlen		= sizeof(int),
@@ -644,7 +642,6 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV6_IP6FRAG_LOW_THRESH,
 		.procname	= "ip6frag_low_thresh",
 		.data		= &init_net.ipv6.frags.low_thresh,
 		.maxlen		= sizeof(int),
@@ -652,26 +649,22 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IPV6_IP6FRAG_TIME,
 		.procname	= "ip6frag_time",
 		.data		= &init_net.ipv6.frags.timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies,
 	},
 	{ }
 };
 
 static struct ctl_table ip6_frags_ctl_table[] = {
 	{
-		.ctl_name	= NET_IPV6_IP6FRAG_SECRET_INTERVAL,
 		.procname	= "ip6frag_secret_interval",
 		.data		= &ip6_frags.secret_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
 	},
 	{ }
 };
@@ -682,7 +675,7 @@
 	struct ctl_table_header *hdr;
 
 	table = ip6_frags_ns_ctl_table;
-	if (net != &init_net) {
+	if (!net_eq(net, &init_net)) {
 		table = kmemdup(table, sizeof(ip6_frags_ns_ctl_table), GFP_KERNEL);
 		if (table == NULL)
 			goto err_alloc;
@@ -700,7 +693,7 @@
 	return 0;
 
 err_reg:
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		kfree(table);
 err_alloc:
 	return -ENOMEM;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index d6fe764..db3b273 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1471,9 +1471,10 @@
 				},
 			},
 		},
-		.gateway = *gateway,
 	};
 
+	ipv6_addr_copy(&rdfl.gateway, gateway);
+
 	if (rt6_need_strict(dest))
 		flags |= RT6_LOOKUP_F_IFACE;
 
@@ -2546,7 +2547,6 @@
 		.proc_handler	=	ipv6_sysctl_rtcache_flush
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_GC_THRESH,
 		.procname	=	"gc_thresh",
 		.data		=	&ip6_dst_ops_template.gc_thresh,
 		.maxlen		=	sizeof(int),
@@ -2554,7 +2554,6 @@
 		.proc_handler	=	proc_dointvec,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_MAX_SIZE,
 		.procname	=	"max_size",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_max_size,
 		.maxlen		=	sizeof(int),
@@ -2562,69 +2561,55 @@
 		.proc_handler	=	proc_dointvec,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_GC_MIN_INTERVAL,
 		.procname	=	"gc_min_interval",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_gc_min_interval,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_jiffies,
-		.strategy	=	sysctl_jiffies,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_GC_TIMEOUT,
 		.procname	=	"gc_timeout",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_gc_timeout,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_jiffies,
-		.strategy	=	sysctl_jiffies,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_GC_INTERVAL,
 		.procname	=	"gc_interval",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_gc_interval,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_jiffies,
-		.strategy	=	sysctl_jiffies,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_GC_ELASTICITY,
 		.procname	=	"gc_elasticity",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_gc_elasticity,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_jiffies,
-		.strategy	=	sysctl_jiffies,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_MTU_EXPIRES,
 		.procname	=	"mtu_expires",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_mtu_expires,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_jiffies,
-		.strategy	=	sysctl_jiffies,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_MIN_ADVMSS,
 		.procname	=	"min_adv_mss",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_min_advmss,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_jiffies,
-		.strategy	=	sysctl_jiffies,
 	},
 	{
-		.ctl_name	=	NET_IPV6_ROUTE_GC_MIN_INTERVAL_MS,
 		.procname	=	"gc_min_interval_ms",
 		.data		=	&init_net.ipv6.sysctl.ip6_rt_gc_min_interval,
 		.maxlen		=	sizeof(int),
 		.mode		=	0644,
 		.proc_handler	=	proc_dointvec_ms_jiffies,
-		.strategy	=	sysctl_ms_jiffies,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 struct ctl_table *ipv6_route_sysctl_init(struct net *net)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index dbd19a7..976e682 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -66,7 +66,7 @@
 static void ipip6_tunnel_init(struct net_device *dev);
 static void ipip6_tunnel_setup(struct net_device *dev);
 
-static int sit_net_id;
+static int sit_net_id __read_mostly;
 struct sit_net {
 	struct ip_tunnel *tunnels_r_l[HASH_SIZE];
 	struct ip_tunnel *tunnels_r[HASH_SIZE];
@@ -77,8 +77,17 @@
 	struct net_device *fb_tunnel_dev;
 };
 
-static DEFINE_RWLOCK(ipip6_lock);
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ipip6_lock);
 
+#define for_each_ip_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
+
+/*
+ * Must be invoked with rcu_read_lock
+ */
 static struct ip_tunnel * ipip6_tunnel_lookup(struct net *net,
 		struct net_device *dev, __be32 remote, __be32 local)
 {
@@ -87,26 +96,26 @@
 	struct ip_tunnel *t;
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 
-	for (t = sitn->tunnels_r_l[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(sitn->tunnels_r_l[h0 ^ h1]) {
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr &&
 		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	for (t = sitn->tunnels_r[h0]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(sitn->tunnels_r[h0]) {
 		if (remote == t->parms.iph.daddr &&
 		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	for (t = sitn->tunnels_l[h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(sitn->tunnels_l[h1]) {
 		if (local == t->parms.iph.saddr &&
 		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	t = sitn->tunnels_wc[0];
+	t = rcu_dereference(sitn->tunnels_wc[0]);
 	if ((t != NULL) && (t->dev->flags & IFF_UP))
 		return t;
 	return NULL;
@@ -143,9 +152,9 @@
 
 	for (tp = ipip6_bucket(sitn, t); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ipip6_lock);
+			spin_lock_bh(&ipip6_lock);
 			*tp = t->next;
-			write_unlock_bh(&ipip6_lock);
+			spin_unlock_bh(&ipip6_lock);
 			break;
 		}
 	}
@@ -155,10 +164,27 @@
 {
 	struct ip_tunnel **tp = ipip6_bucket(sitn, t);
 
+	spin_lock_bh(&ipip6_lock);
 	t->next = *tp;
-	write_lock_bh(&ipip6_lock);
-	*tp = t;
-	write_unlock_bh(&ipip6_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ipip6_lock);
+}
+
+static void ipip6_tunnel_clone_6rd(struct net_device *dev, struct sit_net *sitn)
+{
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel *t = netdev_priv(dev);
+
+	if (t->dev == sitn->fb_tunnel_dev) {
+		ipv6_addr_set(&t->ip6rd.prefix, htonl(0x20020000), 0, 0, 0);
+		t->ip6rd.relay_prefix = 0;
+		t->ip6rd.prefixlen = 16;
+		t->ip6rd.relay_prefixlen = 0;
+	} else {
+		struct ip_tunnel *t0 = netdev_priv(sitn->fb_tunnel_dev);
+		memcpy(&t->ip6rd, &t0->ip6rd, sizeof(t->ip6rd));
+	}
+#endif
 }
 
 static struct ip_tunnel * ipip6_tunnel_locate(struct net *net,
@@ -204,6 +230,7 @@
 
 	nt->parms = *parms;
 	ipip6_tunnel_init(dev);
+	ipip6_tunnel_clone_6rd(dev, sitn);
 
 	if (parms->i_flags & SIT_ISATAP)
 		dev->priv_flags |= IFF_ISATAP;
@@ -222,15 +249,22 @@
 	return NULL;
 }
 
+static DEFINE_SPINLOCK(ipip6_prl_lock);
+
+#define for_each_prl_rcu(start)			\
+	for (prl = rcu_dereference(start);	\
+	     prl;				\
+	     prl = rcu_dereference(prl->next))
+
 static struct ip_tunnel_prl_entry *
 __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr)
 {
-	struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *)NULL;
+	struct ip_tunnel_prl_entry *prl;
 
-	for (p = t->prl; p; p = p->next)
-		if (p->addr == addr)
+	for_each_prl_rcu(t->prl)
+		if (prl->addr == addr)
 			break;
-	return p;
+	return prl;
 
 }
 
@@ -255,7 +289,7 @@
 		kcalloc(cmax, sizeof(*kp), GFP_KERNEL) :
 		NULL;
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 
 	ca = t->prl_count < cmax ? t->prl_count : cmax;
 
@@ -273,7 +307,7 @@
 	}
 
 	c = 0;
-	for (prl = t->prl; prl; prl = prl->next) {
+	for_each_prl_rcu(t->prl) {
 		if (c >= cmax)
 			break;
 		if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr)
@@ -285,7 +319,7 @@
 			break;
 	}
 out:
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 
 	len = sizeof(*kp) * c;
 	ret = 0;
@@ -306,12 +340,14 @@
 	if (a->addr == htonl(INADDR_ANY))
 		return -EINVAL;
 
-	write_lock(&ipip6_lock);
+	spin_lock(&ipip6_prl_lock);
 
 	for (p = t->prl; p; p = p->next) {
 		if (p->addr == a->addr) {
-			if (chg)
-				goto update;
+			if (chg) {
+				p->flags = a->flags;
+				goto out;
+			}
 			err = -EEXIST;
 			goto out;
 		}
@@ -328,46 +364,63 @@
 		goto out;
 	}
 
+	INIT_RCU_HEAD(&p->rcu_head);
 	p->next = t->prl;
-	t->prl = p;
-	t->prl_count++;
-update:
 	p->addr = a->addr;
 	p->flags = a->flags;
+	t->prl_count++;
+	rcu_assign_pointer(t->prl, p);
 out:
-	write_unlock(&ipip6_lock);
+	spin_unlock(&ipip6_prl_lock);
 	return err;
 }
 
+static void prl_entry_destroy_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ip_tunnel_prl_entry, rcu_head));
+}
+
+static void prl_list_destroy_rcu(struct rcu_head *head)
+{
+	struct ip_tunnel_prl_entry *p, *n;
+
+	p = container_of(head, struct ip_tunnel_prl_entry, rcu_head);
+	do {
+		n = p->next;
+		kfree(p);
+		p = n;
+	} while (p);
+}
+
 static int
 ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 {
 	struct ip_tunnel_prl_entry *x, **p;
 	int err = 0;
 
-	write_lock(&ipip6_lock);
+	spin_lock(&ipip6_prl_lock);
 
 	if (a && a->addr != htonl(INADDR_ANY)) {
 		for (p = &t->prl; *p; p = &(*p)->next) {
 			if ((*p)->addr == a->addr) {
 				x = *p;
 				*p = x->next;
-				kfree(x);
+				call_rcu(&x->rcu_head, prl_entry_destroy_rcu);
 				t->prl_count--;
 				goto out;
 			}
 		}
 		err = -ENXIO;
 	} else {
-		while (t->prl) {
+		if (t->prl) {
+			t->prl_count = 0;
 			x = t->prl;
-			t->prl = t->prl->next;
-			kfree(x);
-			t->prl_count--;
+			call_rcu(&x->rcu_head, prl_list_destroy_rcu);
+			t->prl = NULL;
 		}
 	}
 out:
-	write_unlock(&ipip6_lock);
+	spin_unlock(&ipip6_prl_lock);
 	return err;
 }
 
@@ -377,7 +430,7 @@
 	struct ip_tunnel_prl_entry *p;
 	int ok = 1;
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 	p = __ipip6_tunnel_locate_prl(t, iph->saddr);
 	if (p) {
 		if (p->flags & PRL_DEFAULT)
@@ -393,7 +446,7 @@
 		else
 			ok = 0;
 	}
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 	return ok;
 }
 
@@ -403,9 +456,9 @@
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 
 	if (dev == sitn->fb_tunnel_dev) {
-		write_lock_bh(&ipip6_lock);
+		spin_lock_bh(&ipip6_lock);
 		sitn->tunnels_wc[0] = NULL;
-		write_unlock_bh(&ipip6_lock);
+		spin_unlock_bh(&ipip6_lock);
 		dev_put(dev);
 	} else {
 		ipip6_tunnel_unlink(sitn, netdev_priv(dev));
@@ -458,7 +511,7 @@
 
 	err = -ENOENT;
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 	t = ipip6_tunnel_lookup(dev_net(skb->dev),
 				skb->dev,
 				iph->daddr,
@@ -476,7 +529,7 @@
 		t->err_count = 1;
 	t->err_time = jiffies;
 out:
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -496,7 +549,7 @@
 
 	iph = ip_hdr(skb);
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 	tunnel = ipip6_tunnel_lookup(dev_net(skb->dev), skb->dev,
 				     iph->saddr, iph->daddr);
 	if (tunnel != NULL) {
@@ -510,7 +563,7 @@
 		if ((tunnel->dev->priv_flags & IFF_ISATAP) &&
 		    !isatap_chksrc(skb, iph, tunnel)) {
 			tunnel->dev->stats.rx_errors++;
-			read_unlock(&ipip6_lock);
+			rcu_read_unlock();
 			kfree_skb(skb);
 			return 0;
 		}
@@ -521,28 +574,52 @@
 		nf_reset(skb);
 		ipip6_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
-		read_unlock(&ipip6_lock);
+		rcu_read_unlock();
 		return 0;
 	}
 
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 out:
 	kfree_skb(skb);
 	return 0;
 }
 
-/* Returns the embedded IPv4 address if the IPv6 address
-   comes from 6to4 (RFC 3056) addr space */
-
-static inline __be32 try_6to4(struct in6_addr *v6dst)
+/*
+ * Returns the embedded IPv4 address if the IPv6 address
+ * comes from 6rd / 6to4 (RFC 3056) addr space.
+ */
+static inline
+__be32 try_6rd(struct in6_addr *v6dst, struct ip_tunnel *tunnel)
 {
 	__be32 dst = 0;
 
+#ifdef CONFIG_IPV6_SIT_6RD
+	if (ipv6_prefix_equal(v6dst, &tunnel->ip6rd.prefix,
+			      tunnel->ip6rd.prefixlen)) {
+		unsigned pbw0, pbi0;
+		int pbi1;
+		u32 d;
+
+		pbw0 = tunnel->ip6rd.prefixlen >> 5;
+		pbi0 = tunnel->ip6rd.prefixlen & 0x1f;
+
+		d = (ntohl(v6dst->s6_addr32[pbw0]) << pbi0) >>
+		    tunnel->ip6rd.relay_prefixlen;
+
+		pbi1 = pbi0 - tunnel->ip6rd.relay_prefixlen;
+		if (pbi1 > 0)
+			d |= ntohl(v6dst->s6_addr32[pbw0 + 1]) >>
+			     (32 - pbi1);
+
+		dst = tunnel->ip6rd.relay_prefix | htonl(d);
+	}
+#else
 	if (v6dst->s6_addr16[0] == htons(0x2002)) {
 		/* 6to4 v6 addr has 16 bits prefix, 32 v4addr, 16 SLA, ... */
 		memcpy(&dst, &v6dst->s6_addr16[1], 4);
 	}
+#endif
 	return dst;
 }
 
@@ -555,10 +632,12 @@
 				     struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-	struct net_device_stats *stats = &tunnel->dev->stats;
+	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct iphdr  *tiph = &tunnel->parms.iph;
 	struct ipv6hdr *iph6 = ipv6_hdr(skb);
 	u8     tos = tunnel->parms.iph.tos;
+	__be16 df = tiph->frag_off;
 	struct rtable *rt;     			/* Route to the other host */
 	struct net_device *tdev;			/* Device to other host */
 	struct iphdr  *iph;			/* Our new IP header */
@@ -595,7 +674,7 @@
 	}
 
 	if (!dst)
-		dst = try_6to4(&iph6->daddr);
+		dst = try_6rd(&iph6->daddr, tunnel);
 
 	if (!dst) {
 		struct neighbour *neigh = NULL;
@@ -648,25 +727,28 @@
 		goto tx_error;
 	}
 
-	if (tiph->frag_off)
+	if (df) {
 		mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
-	else
-		mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
 
-	if (mtu < 68) {
-		stats->collisions++;
-		ip_rt_put(rt);
-		goto tx_error;
-	}
-	if (mtu < IPV6_MIN_MTU)
-		mtu = IPV6_MIN_MTU;
-	if (tunnel->parms.iph.daddr && skb_dst(skb))
-		skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
+		if (mtu < 68) {
+			stats->collisions++;
+			ip_rt_put(rt);
+			goto tx_error;
+		}
 
-	if (skb->len > mtu) {
-		icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, dev);
-		ip_rt_put(rt);
-		goto tx_error;
+		if (mtu < IPV6_MIN_MTU) {
+			mtu = IPV6_MIN_MTU;
+			df = 0;
+		}
+
+		if (tunnel->parms.iph.daddr && skb_dst(skb))
+			skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
+
+		if (skb->len > mtu) {
+			icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu, dev);
+			ip_rt_put(rt);
+			goto tx_error;
+		}
 	}
 
 	if (tunnel->err_count > 0) {
@@ -688,7 +770,7 @@
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			dev_kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -714,11 +796,7 @@
 	iph 			=	ip_hdr(skb);
 	iph->version		=	4;
 	iph->ihl		=	sizeof(struct iphdr)>>2;
-	if (mtu > IPV6_MIN_MTU)
-		iph->frag_off	=	tiph->frag_off;
-	else
-		iph->frag_off	=	0;
-
+	iph->frag_off		=	df;
 	iph->protocol		=	IPPROTO_IPV6;
 	iph->tos		=	INET_ECN_encapsulate(tos, ipv6_get_dsfield(iph6));
 	iph->daddr		=	rt->rt_dst;
@@ -785,9 +863,15 @@
 	struct ip_tunnel *t;
 	struct net *net = dev_net(dev);
 	struct sit_net *sitn = net_generic(net, sit_net_id);
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel_6rd ip6rd;
+#endif
 
 	switch (cmd) {
 	case SIOCGETTUNNEL:
+#ifdef CONFIG_IPV6_SIT_6RD
+	case SIOCGET6RD:
+#endif
 		t = NULL;
 		if (dev == sitn->fb_tunnel_dev) {
 			if (copy_from_user(&p, ifr->ifr_ifru.ifru_data, sizeof(p))) {
@@ -798,9 +882,25 @@
 		}
 		if (t == NULL)
 			t = netdev_priv(dev);
-		memcpy(&p, &t->parms, sizeof(p));
-		if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p)))
-			err = -EFAULT;
+
+		err = -EFAULT;
+		if (cmd == SIOCGETTUNNEL) {
+			memcpy(&p, &t->parms, sizeof(p));
+			if (copy_to_user(ifr->ifr_ifru.ifru_data, &p,
+					 sizeof(p)))
+				goto done;
+#ifdef CONFIG_IPV6_SIT_6RD
+		} else {
+			ipv6_addr_copy(&ip6rd.prefix, &t->ip6rd.prefix);
+			ip6rd.relay_prefix = t->ip6rd.relay_prefix;
+			ip6rd.prefixlen = t->ip6rd.prefixlen;
+			ip6rd.relay_prefixlen = t->ip6rd.relay_prefixlen;
+			if (copy_to_user(ifr->ifr_ifru.ifru_data, &ip6rd,
+					 sizeof(ip6rd)))
+				goto done;
+#endif
+		}
+		err = 0;
 		break;
 
 	case SIOCADDTUNNEL:
@@ -921,6 +1021,54 @@
 		netdev_state_change(dev);
 		break;
 
+#ifdef CONFIG_IPV6_SIT_6RD
+	case SIOCADD6RD:
+	case SIOCCHG6RD:
+	case SIOCDEL6RD:
+		err = -EPERM;
+		if (!capable(CAP_NET_ADMIN))
+			goto done;
+
+		err = -EFAULT;
+		if (copy_from_user(&ip6rd, ifr->ifr_ifru.ifru_data,
+				   sizeof(ip6rd)))
+			goto done;
+
+		t = netdev_priv(dev);
+
+		if (cmd != SIOCDEL6RD) {
+			struct in6_addr prefix;
+			__be32 relay_prefix;
+
+			err = -EINVAL;
+			if (ip6rd.relay_prefixlen > 32 ||
+			    ip6rd.prefixlen + (32 - ip6rd.relay_prefixlen) > 64)
+				goto done;
+
+			ipv6_addr_prefix(&prefix, &ip6rd.prefix,
+					 ip6rd.prefixlen);
+			if (!ipv6_addr_equal(&prefix, &ip6rd.prefix))
+				goto done;
+			if (ip6rd.relay_prefixlen)
+				relay_prefix = ip6rd.relay_prefix &
+					       htonl(0xffffffffUL <<
+						     (32 - ip6rd.relay_prefixlen));
+			else
+				relay_prefix = 0;
+			if (relay_prefix != ip6rd.relay_prefix)
+				goto done;
+
+			ipv6_addr_copy(&t->ip6rd.prefix, &prefix);
+			t->ip6rd.relay_prefix = relay_prefix;
+			t->ip6rd.prefixlen = ip6rd.prefixlen;
+			t->ip6rd.relay_prefixlen = ip6rd.relay_prefixlen;
+		} else
+			ipip6_tunnel_clone_6rd(dev, sitn);
+
+		err = 0;
+		break;
+#endif
+
 	default:
 		err = -EINVAL;
 	}
@@ -997,33 +1145,27 @@
 	.priority	=	1,
 };
 
-static void sit_destroy_tunnels(struct sit_net *sitn)
+static void sit_destroy_tunnels(struct sit_net *sitn, struct list_head *head)
 {
 	int prio;
 
 	for (prio = 1; prio < 4; prio++) {
 		int h;
 		for (h = 0; h < HASH_SIZE; h++) {
-			struct ip_tunnel *t;
-			while ((t = sitn->tunnels[prio][h]) != NULL)
-				unregister_netdevice(t->dev);
+			struct ip_tunnel *t = sitn->tunnels[prio][h];
+
+			while (t != NULL) {
+				unregister_netdevice_queue(t->dev, head);
+				t = t->next;
+			}
 		}
 	}
 }
 
 static int sit_init_net(struct net *net)
 {
+	struct sit_net *sitn = net_generic(net, sit_net_id);
 	int err;
-	struct sit_net *sitn;
-
-	err = -ENOMEM;
-	sitn = kzalloc(sizeof(struct sit_net), GFP_KERNEL);
-	if (sitn == NULL)
-		goto err_alloc;
-
-	err = net_assign_generic(net, sit_net_id, sitn);
-	if (err < 0)
-		goto err_assign;
 
 	sitn->tunnels[0] = sitn->tunnels_wc;
 	sitn->tunnels[1] = sitn->tunnels_l;
@@ -1039,6 +1181,7 @@
 	dev_net_set(sitn->fb_tunnel_dev, net);
 
 	ipip6_fb_tunnel_init(sitn->fb_tunnel_dev);
+	ipip6_tunnel_clone_6rd(sitn->fb_tunnel_dev, sitn);
 
 	if ((err = register_netdev(sitn->fb_tunnel_dev)))
 		goto err_reg_dev;
@@ -1049,35 +1192,34 @@
 	dev_put(sitn->fb_tunnel_dev);
 	free_netdev(sitn->fb_tunnel_dev);
 err_alloc_dev:
-	/* nothing */
-err_assign:
-	kfree(sitn);
-err_alloc:
 	return err;
 }
 
 static void sit_exit_net(struct net *net)
 {
-	struct sit_net *sitn;
+	struct sit_net *sitn = net_generic(net, sit_net_id);
+	LIST_HEAD(list);
 
-	sitn = net_generic(net, sit_net_id);
 	rtnl_lock();
-	sit_destroy_tunnels(sitn);
-	unregister_netdevice(sitn->fb_tunnel_dev);
+	sit_destroy_tunnels(sitn, &list);
+	unregister_netdevice_queue(sitn->fb_tunnel_dev, &list);
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
-	kfree(sitn);
 }
 
 static struct pernet_operations sit_net_ops = {
 	.init = sit_init_net,
 	.exit = sit_exit_net,
+	.id   = &sit_net_id,
+	.size = sizeof(struct sit_net),
 };
 
 static void __exit sit_cleanup(void)
 {
 	xfrm4_tunnel_deregister(&sit_handler, AF_INET6);
 
-	unregister_pernet_gen_device(sit_net_id, &sit_net_ops);
+	unregister_pernet_device(&sit_net_ops);
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 static int __init sit_init(void)
@@ -1091,7 +1233,7 @@
 		return -EAGAIN;
 	}
 
-	err = register_pernet_gen_device(&sit_net_id, &sit_net_ops);
+	err = register_pernet_device(&sit_net_ops);
 	if (err < 0)
 		xfrm4_tunnel_deregister(&sit_handler, AF_INET6);
 
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 6b6ae91..5b9af50 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -159,6 +159,8 @@
 
 struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb)
 {
+	struct tcp_options_received tcp_opt;
+	u8 *hash_location;
 	struct inet_request_sock *ireq;
 	struct inet6_request_sock *ireq6;
 	struct tcp_request_sock *treq;
@@ -171,7 +173,6 @@
 	int mss;
 	struct dst_entry *dst;
 	__u8 rcv_wscale;
-	struct tcp_options_received tcp_opt;
 
 	if (!sysctl_tcp_syncookies || !th->ack)
 		goto out;
@@ -184,13 +185,6 @@
 
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESRECV);
 
-	/* check for timestamp cookie support */
-	memset(&tcp_opt, 0, sizeof(tcp_opt));
-	tcp_parse_options(skb, &tcp_opt, 0);
-
-	if (tcp_opt.saw_tstamp)
-		cookie_check_timestamp(&tcp_opt);
-
 	ret = NULL;
 	req = inet6_reqsk_alloc(&tcp6_request_sock_ops);
 	if (!req)
@@ -224,12 +218,6 @@
 	req->expires = 0UL;
 	req->retrans = 0;
 	ireq->ecn_ok		= 0;
-	ireq->snd_wscale	= tcp_opt.snd_wscale;
-	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
-	ireq->sack_ok		= tcp_opt.sack_ok;
-	ireq->wscale_ok		= tcp_opt.wscale_ok;
-	ireq->tstamp_ok		= tcp_opt.saw_tstamp;
-	req->ts_recent		= tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
 	treq->rcv_isn = ntohl(th->seq) - 1;
 	treq->snt_isn = cookie;
 
@@ -252,8 +240,9 @@
 		}
 		ipv6_addr_copy(&fl.fl6_src, &ireq6->loc_addr);
 		fl.oif = sk->sk_bound_dev_if;
+		fl.mark = sk->sk_mark;
 		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
-		fl.fl_ip_sport = inet_sk(sk)->sport;
+		fl.fl_ip_sport = inet_sk(sk)->inet_sport;
 		security_req_classify_flow(req, &fl);
 		if (ip6_dst_lookup(sk, &dst, &fl))
 			goto out_free;
@@ -264,6 +253,21 @@
 			goto out_free;
 	}
 
+	/* check for timestamp cookie support */
+	memset(&tcp_opt, 0, sizeof(tcp_opt));
+	tcp_parse_options(skb, &tcp_opt, &hash_location, 0, dst);
+
+	if (tcp_opt.saw_tstamp)
+		cookie_check_timestamp(&tcp_opt);
+
+	req->ts_recent          = tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
+
+	ireq->snd_wscale        = tcp_opt.snd_wscale;
+	ireq->rcv_wscale        = tcp_opt.rcv_wscale;
+	ireq->sack_ok           = tcp_opt.sack_ok;
+	ireq->wscale_ok         = tcp_opt.wscale_ok;
+	ireq->tstamp_ok         = tcp_opt.saw_tstamp;
+
 	req->window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW);
 	tcp_select_initial_window(tcp_full_space(sk), req->mss,
 				  &req->rcv_wnd, &req->window_clamp,
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 0dc6a4e..c690736 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -16,45 +16,41 @@
 
 static ctl_table ipv6_table_template[] = {
 	{
-		.ctl_name	= NET_IPV6_ROUTE,
 		.procname	= "route",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= ipv6_route_table_template
 	},
 	{
-		.ctl_name	= NET_IPV6_ICMP,
 		.procname	= "icmp",
 		.maxlen		= 0,
 		.mode		= 0555,
 		.child		= ipv6_icmp_table_template
 	},
 	{
-		.ctl_name	= NET_IPV6_BINDV6ONLY,
 		.procname	= "bindv6only",
 		.data		= &init_net.ipv6.sysctl.bindv6only,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table ipv6_rotable[] = {
 	{
-		.ctl_name	= NET_IPV6_MLD_MAX_MSF,
 		.procname	= "mld_max_msf",
 		.data		= &sysctl_mld_max_msf,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 struct ctl_path net_ipv6_ctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv6", .ctl_name = NET_IPV6, },
+	{ .procname = "net", },
+	{ .procname = "ipv6", },
 	{ },
 };
 EXPORT_SYMBOL_GPL(net_ipv6_ctl_path);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 21d100b..aadd7ce 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -226,10 +226,9 @@
 #endif
 			goto failure;
 		} else {
-			ipv6_addr_set(&np->saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->saddr);
-			ipv6_addr_set(&np->rcv_saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->rcv_saddr);
+			ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
+			ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
+					       &np->rcv_saddr);
 		}
 
 		return err;
@@ -243,8 +242,9 @@
 	ipv6_addr_copy(&fl.fl6_src,
 		       (saddr ? saddr : &np->saddr));
 	fl.oif = sk->sk_bound_dev_if;
+	fl.mark = sk->sk_mark;
 	fl.fl_ip_dport = usin->sin6_port;
-	fl.fl_ip_sport = inet->sport;
+	fl.fl_ip_sport = inet->inet_sport;
 
 	if (np->opt && np->opt->srcrt) {
 		struct rt0_hdr *rt0 = (struct rt0_hdr *)np->opt->srcrt;
@@ -276,7 +276,7 @@
 
 	/* set the source address */
 	ipv6_addr_copy(&np->saddr, saddr);
-	inet->rcv_saddr = LOOPBACK4_IPV6;
+	inet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 	sk->sk_gso_type = SKB_GSO_TCPV6;
 	__ip6_dst_store(sk, dst, NULL, NULL);
@@ -288,7 +288,7 @@
 
 	tp->rx_opt.mss_clamp = IPV6_MIN_MTU - sizeof(struct tcphdr) - sizeof(struct ipv6hdr);
 
-	inet->dport = usin->sin6_port;
+	inet->inet_dport = usin->sin6_port;
 
 	tcp_set_state(sk, TCP_SYN_SENT);
 	err = inet6_hash_connect(&tcp_death_row, sk);
@@ -298,8 +298,8 @@
 	if (!tp->write_seq)
 		tp->write_seq = secure_tcpv6_sequence_number(np->saddr.s6_addr32,
 							     np->daddr.s6_addr32,
-							     inet->sport,
-							     inet->dport);
+							     inet->inet_sport,
+							     inet->inet_dport);
 
 	err = tcp_connect(sk);
 	if (err)
@@ -311,7 +311,7 @@
 	tcp_set_state(sk, TCP_CLOSE);
 	__sk_dst_reset(sk);
 failure:
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	sk->sk_route_caps = 0;
 	return err;
 }
@@ -383,8 +383,9 @@
 			ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
 			ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 			fl.oif = sk->sk_bound_dev_if;
-			fl.fl_ip_dport = inet->dport;
-			fl.fl_ip_sport = inet->sport;
+			fl.mark = sk->sk_mark;
+			fl.fl_ip_dport = inet->inet_dport;
+			fl.fl_ip_sport = inet->inet_sport;
 			security_skb_classify_flow(skb, &fl);
 
 			if ((err = ip6_dst_lookup(sk, &dst, &fl))) {
@@ -460,7 +461,8 @@
 }
 
 
-static int tcp_v6_send_synack(struct sock *sk, struct request_sock *req)
+static int tcp_v6_send_synack(struct sock *sk, struct request_sock *req,
+			      struct request_values *rvp)
 {
 	struct inet6_request_sock *treq = inet6_rsk(req);
 	struct ipv6_pinfo *np = inet6_sk(sk);
@@ -477,6 +479,7 @@
 	ipv6_addr_copy(&fl.fl6_src, &treq->loc_addr);
 	fl.fl6_flowlabel = 0;
 	fl.oif = treq->iif;
+	fl.mark = sk->sk_mark;
 	fl.fl_ip_dport = inet_rsk(req)->rmt_port;
 	fl.fl_ip_sport = inet_rsk(req)->loc_port;
 	security_req_classify_flow(req, &fl);
@@ -497,7 +500,7 @@
 	if ((err = xfrm_lookup(sock_net(sk), &dst, &fl, sk, 0)) < 0)
 		goto done;
 
-	skb = tcp_make_synack(sk, dst, req);
+	skb = tcp_make_synack(sk, dst, req, rvp);
 	if (skb) {
 		struct tcphdr *th = tcp_hdr(skb);
 
@@ -1159,11 +1162,14 @@
  */
 static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 {
+	struct tcp_extend_values tmp_ext;
+	struct tcp_options_received tmp_opt;
+	u8 *hash_location;
+	struct request_sock *req;
 	struct inet6_request_sock *treq;
 	struct ipv6_pinfo *np = inet6_sk(sk);
-	struct tcp_options_received tmp_opt;
 	struct tcp_sock *tp = tcp_sk(sk);
-	struct request_sock *req = NULL;
+	struct dst_entry *dst = __sk_dst_get(sk);
 	__u32 isn = TCP_SKB_CB(skb)->when;
 #ifdef CONFIG_SYN_COOKIES
 	int want_cookie = 0;
@@ -1202,8 +1208,52 @@
 	tcp_clear_options(&tmp_opt);
 	tmp_opt.mss_clamp = IPV6_MIN_MTU - sizeof(struct tcphdr) - sizeof(struct ipv6hdr);
 	tmp_opt.user_mss = tp->rx_opt.user_mss;
+	tcp_parse_options(skb, &tmp_opt, &hash_location, 0, dst);
 
-	tcp_parse_options(skb, &tmp_opt, 0);
+	if (tmp_opt.cookie_plus > 0 &&
+	    tmp_opt.saw_tstamp &&
+	    !tp->rx_opt.cookie_out_never &&
+	    (sysctl_tcp_cookie_size > 0 ||
+	     (tp->cookie_values != NULL &&
+	      tp->cookie_values->cookie_desired > 0))) {
+		u8 *c;
+		u32 *d;
+		u32 *mess = &tmp_ext.cookie_bakery[COOKIE_DIGEST_WORDS];
+		int l = tmp_opt.cookie_plus - TCPOLEN_COOKIE_BASE;
+
+		if (tcp_cookie_generator(&tmp_ext.cookie_bakery[0]) != 0)
+			goto drop_and_free;
+
+		/* Secret recipe starts with IP addresses */
+		d = &ipv6_hdr(skb)->daddr.s6_addr32[0];
+		*mess++ ^= *d++;
+		*mess++ ^= *d++;
+		*mess++ ^= *d++;
+		*mess++ ^= *d++;
+		d = &ipv6_hdr(skb)->saddr.s6_addr32[0];
+		*mess++ ^= *d++;
+		*mess++ ^= *d++;
+		*mess++ ^= *d++;
+		*mess++ ^= *d++;
+
+		/* plus variable length Initiator Cookie */
+		c = (u8 *)mess;
+		while (l-- > 0)
+			*c++ ^= *hash_location++;
+
+#ifdef CONFIG_SYN_COOKIES
+		want_cookie = 0;	/* not our kind of cookie */
+#endif
+		tmp_ext.cookie_out_never = 0; /* false */
+		tmp_ext.cookie_plus = tmp_opt.cookie_plus;
+	} else if (!tp->rx_opt.cookie_in_always) {
+		/* redundant indications, but ensure initialization. */
+		tmp_ext.cookie_out_never = 1; /* true */
+		tmp_ext.cookie_plus = 0;
+	} else {
+		goto drop_and_free;
+	}
+	tmp_ext.cookie_in_always = tp->rx_opt.cookie_in_always;
 
 	if (want_cookie && !tmp_opt.saw_tstamp)
 		tcp_clear_options(&tmp_opt);
@@ -1236,23 +1286,21 @@
 
 		isn = tcp_v6_init_sequence(skb);
 	}
-
 	tcp_rsk(req)->snt_isn = isn;
 
 	security_inet_conn_request(sk, skb, req);
 
-	if (tcp_v6_send_synack(sk, req))
-		goto drop;
+	if (tcp_v6_send_synack(sk, req,
+			       (struct request_values *)&tmp_ext) ||
+	    want_cookie)
+		goto drop_and_free;
 
-	if (!want_cookie) {
-		inet6_csk_reqsk_queue_hash_add(sk, req, TCP_TIMEOUT_INIT);
-		return 0;
-	}
+	inet6_csk_reqsk_queue_hash_add(sk, req, TCP_TIMEOUT_INIT);
+	return 0;
 
+drop_and_free:
+	reqsk_free(req);
 drop:
-	if (req)
-		reqsk_free(req);
-
 	return 0; /* don't send reset */
 }
 
@@ -1290,11 +1338,9 @@
 
 		memcpy(newnp, np, sizeof(struct ipv6_pinfo));
 
-		ipv6_addr_set(&newnp->daddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->daddr);
+		ipv6_addr_set_v4mapped(newinet->inet_daddr, &newnp->daddr);
 
-		ipv6_addr_set(&newnp->saddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->saddr);
+		ipv6_addr_set_v4mapped(newinet->inet_saddr, &newnp->saddr);
 
 		ipv6_addr_copy(&newnp->rcv_saddr, &newnp->saddr);
 
@@ -1345,6 +1391,7 @@
 		}
 		ipv6_addr_copy(&fl.fl6_src, &treq->loc_addr);
 		fl.oif = sk->sk_bound_dev_if;
+		fl.mark = sk->sk_mark;
 		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
 		fl.fl_ip_sport = inet_rsk(req)->loc_port;
 		security_req_classify_flow(req, &fl);
@@ -1431,7 +1478,8 @@
 	newtp->advmss = dst_metric(dst, RTAX_ADVMSS);
 	tcp_initialize_rcv_mss(newsk);
 
-	newinet->daddr = newinet->saddr = newinet->rcv_saddr = LOOPBACK4_IPV6;
+	newinet->inet_daddr = newinet->inet_saddr = LOOPBACK4_IPV6;
+	newinet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 #ifdef CONFIG_TCP_MD5SIG
 	/* Copy over the MD5 key from the original socket */
@@ -1848,7 +1896,7 @@
 	 */
 	tp->snd_ssthresh = TCP_INFINITE_SSTHRESH;
 	tp->snd_cwnd_clamp = ~0;
-	tp->mss_cache = 536;
+	tp->mss_cache = TCP_MSS_DEFAULT;
 
 	tp->reordering = sysctl_tcp_reordering;
 
@@ -1864,6 +1912,19 @@
 	tp->af_specific = &tcp_sock_ipv6_specific;
 #endif
 
+	/* TCP Cookie Transactions */
+	if (sysctl_tcp_cookie_size > 0) {
+		/* Default, cookies without s_data_payload. */
+		tp->cookie_values =
+			kzalloc(sizeof(*tp->cookie_values),
+				sk->sk_allocation);
+		if (tp->cookie_values != NULL)
+			kref_init(&tp->cookie_values->kref);
+	}
+	/* Presumed zeroed, in order of appearance:
+	 *	cookie_in_always, cookie_out_never,
+	 *	s_data_constant, s_data_in, s_data_out
+	 */
 	sk->sk_sndbuf = sysctl_tcp_wmem[1];
 	sk->sk_rcvbuf = sysctl_tcp_rmem[1];
 
@@ -1931,8 +1992,8 @@
 
 	dest  = &np->daddr;
 	src   = &np->rcv_saddr;
-	destp = ntohs(inet->dport);
-	srcp  = ntohs(inet->sport);
+	destp = ntohs(inet->inet_dport);
+	srcp  = ntohs(inet->inet_sport);
 
 	if (icsk->icsk_pending == ICSK_TIME_RETRANS) {
 		timer_active	= 1;
@@ -2109,7 +2170,6 @@
 	.protocol	=	IPPROTO_TCP,
 	.prot		=	&tcpv6_prot,
 	.ops		=	&inet6_stream_ops,
-	.capability	=	-1,
 	.no_check	=	0,
 	.flags		=	INET_PROTOSW_PERMANENT |
 				INET_PROTOSW_ICSK,
@@ -2124,12 +2184,17 @@
 static void tcpv6_net_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv6.tcp_sk);
-	inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET6);
+}
+
+static void tcpv6_net_exit_batch(struct list_head *net_exit_list)
+{
+	inet_twsk_purge(&tcp_hashinfo, &tcp_death_row, AF_INET6);
 }
 
 static struct pernet_operations tcpv6_net_ops = {
-	.init = tcpv6_net_init,
-	.exit = tcpv6_net_exit,
+	.init	    = tcpv6_net_init,
+	.exit	    = tcpv6_net_exit,
+	.exit_batch = tcpv6_net_exit_batch,
 };
 
 int __init tcpv6_init(void)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index cf538ed..69ebdbe 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -53,7 +53,7 @@
 {
 	const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr;
 	const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2);
-	__be32 sk_rcv_saddr = inet_sk(sk)->rcv_saddr;
+	__be32 sk1_rcv_saddr = inet_sk(sk)->inet_rcv_saddr;
 	__be32 sk2_rcv_saddr = inet_rcv_saddr(sk2);
 	int sk_ipv6only = ipv6_only_sock(sk);
 	int sk2_ipv6only = inet_v6_ipv6only(sk2);
@@ -63,8 +63,8 @@
 	/* if both are mapped, treat as IPv4 */
 	if (addr_type == IPV6_ADDR_MAPPED && addr_type2 == IPV6_ADDR_MAPPED)
 		return (!sk2_ipv6only &&
-			(!sk_rcv_saddr || !sk2_rcv_saddr ||
-			  sk_rcv_saddr == sk2_rcv_saddr));
+			(!sk1_rcv_saddr || !sk2_rcv_saddr ||
+			  sk1_rcv_saddr == sk2_rcv_saddr));
 
 	if (addr_type2 == IPV6_ADDR_ANY &&
 	    !(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED))
@@ -81,9 +81,33 @@
 	return 0;
 }
 
+static unsigned int udp6_portaddr_hash(struct net *net,
+				       const struct in6_addr *addr6,
+				       unsigned int port)
+{
+	unsigned int hash, mix = net_hash_mix(net);
+
+	if (ipv6_addr_any(addr6))
+		hash = jhash_1word(0, mix);
+	else if (ipv6_addr_v4mapped(addr6))
+		hash = jhash_1word(addr6->s6_addr32[3], mix);
+	else
+		hash = jhash2(addr6->s6_addr32, 4, mix);
+
+	return hash ^ port;
+}
+
+
 int udp_v6_get_port(struct sock *sk, unsigned short snum)
 {
-	return udp_lib_get_port(sk, snum, ipv6_rcv_saddr_equal);
+	unsigned int hash2_nulladdr =
+		udp6_portaddr_hash(sock_net(sk), &in6addr_any, snum);
+	unsigned int hash2_partial = 
+		udp6_portaddr_hash(sock_net(sk), &inet6_sk(sk)->rcv_saddr, 0);
+
+	/* precompute partial secondary hash */
+	udp_sk(sk)->udp_portaddr_hash = hash2_partial;
+	return udp_lib_get_port(sk, snum, ipv6_rcv_saddr_equal, hash2_nulladdr);
 }
 
 static inline int compute_score(struct sock *sk, struct net *net,
@@ -94,14 +118,14 @@
 {
 	int score = -1;
 
-	if (net_eq(sock_net(sk), net) && sk->sk_hash == hnum &&
+	if (net_eq(sock_net(sk), net) && udp_sk(sk)->udp_port_hash == hnum &&
 			sk->sk_family == PF_INET6) {
 		struct ipv6_pinfo *np = inet6_sk(sk);
 		struct inet_sock *inet = inet_sk(sk);
 
 		score = 0;
-		if (inet->dport) {
-			if (inet->dport != sport)
+		if (inet->inet_dport) {
+			if (inet->inet_dport != sport)
 				return -1;
 			score++;
 		}
@@ -124,6 +148,86 @@
 	return score;
 }
 
+#define SCORE2_MAX (1 + 1 + 1)
+static inline int compute_score2(struct sock *sk, struct net *net,
+				const struct in6_addr *saddr, __be16 sport,
+				const struct in6_addr *daddr, unsigned short hnum,
+				int dif)
+{
+	int score = -1;
+
+	if (net_eq(sock_net(sk), net) && udp_sk(sk)->udp_port_hash == hnum &&
+			sk->sk_family == PF_INET6) {
+		struct ipv6_pinfo *np = inet6_sk(sk);
+		struct inet_sock *inet = inet_sk(sk);
+
+		if (!ipv6_addr_equal(&np->rcv_saddr, daddr))
+			return -1;
+		score = 0;
+		if (inet->inet_dport) {
+			if (inet->inet_dport != sport)
+				return -1;
+			score++;
+		}
+		if (!ipv6_addr_any(&np->daddr)) {
+			if (!ipv6_addr_equal(&np->daddr, saddr))
+				return -1;
+			score++;
+		}
+		if (sk->sk_bound_dev_if) {
+			if (sk->sk_bound_dev_if != dif)
+				return -1;
+			score++;
+		}
+	}
+	return score;
+}
+
+
+/* called with read_rcu_lock() */
+static struct sock *udp6_lib_lookup2(struct net *net,
+		const struct in6_addr *saddr, __be16 sport,
+		const struct in6_addr *daddr, unsigned int hnum, int dif,
+		struct udp_hslot *hslot2, unsigned int slot2)
+{
+	struct sock *sk, *result;
+	struct hlist_nulls_node *node;
+	int score, badness;
+
+begin:
+	result = NULL;
+	badness = -1;
+	udp_portaddr_for_each_entry_rcu(sk, node, &hslot2->head) {
+		score = compute_score2(sk, net, saddr, sport,
+				      daddr, hnum, dif);
+		if (score > badness) {
+			result = sk;
+			badness = score;
+			if (score == SCORE2_MAX)
+				goto exact_match;
+		}
+	}
+	/*
+	 * if the nulls value we got at the end of this lookup is
+	 * not the expected one, we must restart lookup.
+	 * We probably met an item that was moved to another chain.
+	 */
+	if (get_nulls_value(node) != slot2)
+		goto begin;
+
+	if (result) {
+exact_match:
+		if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
+			result = NULL;
+		else if (unlikely(compute_score2(result, net, saddr, sport,
+				  daddr, hnum, dif) < badness)) {
+			sock_put(result);
+			goto begin;
+		}
+	}
+	return result;
+}
+
 static struct sock *__udp6_lib_lookup(struct net *net,
 				      struct in6_addr *saddr, __be16 sport,
 				      struct in6_addr *daddr, __be16 dport,
@@ -132,11 +236,35 @@
 	struct sock *sk, *result;
 	struct hlist_nulls_node *node;
 	unsigned short hnum = ntohs(dport);
-	unsigned int hash = udp_hashfn(net, hnum);
-	struct udp_hslot *hslot = &udptable->hash[hash];
+	unsigned int hash2, slot2, slot = udp_hashfn(net, hnum, udptable->mask);
+	struct udp_hslot *hslot2, *hslot = &udptable->hash[slot];
 	int score, badness;
 
 	rcu_read_lock();
+	if (hslot->count > 10) {
+		hash2 = udp6_portaddr_hash(net, daddr, hnum);
+		slot2 = hash2 & udptable->mask;
+		hslot2 = &udptable->hash2[slot2];
+		if (hslot->count < hslot2->count)
+			goto begin;
+
+		result = udp6_lib_lookup2(net, saddr, sport,
+					  daddr, hnum, dif,
+					  hslot2, slot2);
+		if (!result) {
+			hash2 = udp6_portaddr_hash(net, &in6addr_any, hnum);
+			slot2 = hash2 & udptable->mask;
+			hslot2 = &udptable->hash2[slot2];
+			if (hslot->count < hslot2->count)
+				goto begin;
+
+			result = udp6_lib_lookup2(net, &in6addr_any, sport,
+						  daddr, hnum, dif,
+						  hslot2, slot2);
+		}
+		rcu_read_unlock();
+		return result;
+	}
 begin:
 	result = NULL;
 	badness = -1;
@@ -152,7 +280,7 @@
 	 * not the expected one, we must restart lookup.
 	 * We probably met an item that was moved to another chain.
 	 */
-	if (get_nulls_value(node) != hash)
+	if (get_nulls_value(node) != slot)
 		goto begin;
 
 	if (result) {
@@ -252,7 +380,7 @@
 					UDP_MIB_INDATAGRAMS, is_udplite);
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	/* Copy the address. */
 	if (msg->msg_name) {
@@ -265,8 +393,8 @@
 		sin6->sin6_scope_id = 0;
 
 		if (is_udp4)
-			ipv6_addr_set(&sin6->sin6_addr, 0, 0,
-				      htonl(0xffff), ip_hdr(skb)->saddr);
+			ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
+					       &sin6->sin6_addr);
 		else {
 			ipv6_addr_copy(&sin6->sin6_addr,
 				       &ipv6_hdr(skb)->saddr);
@@ -383,18 +511,18 @@
 			goto drop;
 	}
 
-	if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
+	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
 		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM) {
+		if (rc == -ENOMEM)
 			UDP6_INC_STATS_BH(sock_net(sk),
 					UDP_MIB_RCVBUFERRORS, is_udplite);
-			atomic_inc(&sk->sk_drops);
-		}
-		goto drop;
+		goto drop_no_sk_drops_inc;
 	}
 
 	return 0;
 drop:
+	atomic_inc(&sk->sk_drops);
+drop_no_sk_drops_inc:
 	UDP6_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
 	kfree_skb(skb);
 	return -1;
@@ -415,10 +543,11 @@
 		if (!net_eq(sock_net(s), net))
 			continue;
 
-		if (s->sk_hash == num && s->sk_family == PF_INET6) {
+		if (udp_sk(s)->udp_port_hash == num &&
+		    s->sk_family == PF_INET6) {
 			struct ipv6_pinfo *np = inet6_sk(s);
-			if (inet->dport) {
-				if (inet->dport != rmt_port)
+			if (inet->inet_dport) {
+				if (inet->inet_dport != rmt_port)
 					continue;
 			}
 			if (!ipv6_addr_any(&np->daddr) &&
@@ -440,6 +569,33 @@
 	return NULL;
 }
 
+static void flush_stack(struct sock **stack, unsigned int count,
+			struct sk_buff *skb, unsigned int final)
+{
+	unsigned int i;
+	struct sock *sk;
+	struct sk_buff *skb1;
+
+	for (i = 0; i < count; i++) {
+		skb1 = (i == final) ? skb : skb_clone(skb, GFP_ATOMIC);
+
+		sk = stack[i];
+		if (skb1) {
+			bh_lock_sock(sk);
+			if (!sock_owned_by_user(sk))
+				udpv6_queue_rcv_skb(sk, skb1);
+			else
+				sk_add_backlog(sk, skb1);
+			bh_unlock_sock(sk);
+		} else {
+			atomic_inc(&sk->sk_drops);
+			UDP6_INC_STATS_BH(sock_net(sk),
+					UDP_MIB_RCVBUFERRORS, IS_UDPLITE(sk));
+			UDP6_INC_STATS_BH(sock_net(sk),
+					UDP_MIB_INERRORS, IS_UDPLITE(sk));
+		}
+	}
+}
 /*
  * Note: called only from the BH handler context,
  * so we don't need to lock the hashes.
@@ -448,41 +604,43 @@
 		struct in6_addr *saddr, struct in6_addr *daddr,
 		struct udp_table *udptable)
 {
-	struct sock *sk, *sk2;
+	struct sock *sk, *stack[256 / sizeof(struct sock *)];
 	const struct udphdr *uh = udp_hdr(skb);
-	struct udp_hslot *hslot = &udptable->hash[udp_hashfn(net, ntohs(uh->dest))];
+	struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
 	int dif;
+	unsigned int i, count = 0;
 
 	spin_lock(&hslot->lock);
 	sk = sk_nulls_head(&hslot->head);
 	dif = inet6_iif(skb);
 	sk = udp_v6_mcast_next(net, sk, uh->dest, daddr, uh->source, saddr, dif);
-	if (!sk) {
-		kfree_skb(skb);
-		goto out;
-	}
-
-	sk2 = sk;
-	while ((sk2 = udp_v6_mcast_next(net, sk_nulls_next(sk2), uh->dest, daddr,
-					uh->source, saddr, dif))) {
-		struct sk_buff *buff = skb_clone(skb, GFP_ATOMIC);
-		if (buff) {
-			bh_lock_sock(sk2);
-			if (!sock_owned_by_user(sk2))
-				udpv6_queue_rcv_skb(sk2, buff);
-			else
-				sk_add_backlog(sk2, buff);
-			bh_unlock_sock(sk2);
+	while (sk) {
+		stack[count++] = sk;
+		sk = udp_v6_mcast_next(net, sk_nulls_next(sk), uh->dest, daddr,
+				       uh->source, saddr, dif);
+		if (unlikely(count == ARRAY_SIZE(stack))) {
+			if (!sk)
+				break;
+			flush_stack(stack, count, skb, ~0);
+			count = 0;
 		}
 	}
-	bh_lock_sock(sk);
-	if (!sock_owned_by_user(sk))
-		udpv6_queue_rcv_skb(sk, skb);
-	else
-		sk_add_backlog(sk, skb);
-	bh_unlock_sock(sk);
-out:
+	/*
+	 * before releasing the lock, we must take reference on sockets
+	 */
+	for (i = 0; i < count; i++)
+		sock_hold(stack[i]);
+
 	spin_unlock(&hslot->lock);
+
+	if (count) {
+		flush_stack(stack, count, skb, count - 1);
+
+		for (i = 0; i < count; i++)
+			sock_put(stack[i]);
+	} else {
+		kfree_skb(skb);
+	}
 	return 0;
 }
 
@@ -792,7 +950,7 @@
 		if (ipv6_addr_v4mapped(daddr)) {
 			struct sockaddr_in sin;
 			sin.sin_family = AF_INET;
-			sin.sin_port = sin6 ? sin6->sin6_port : inet->dport;
+			sin.sin_port = sin6 ? sin6->sin6_port : inet->inet_dport;
 			sin.sin_addr.s_addr = daddr->s6_addr32[3];
 			msg->msg_name = &sin;
 			msg->msg_namelen = sizeof(sin);
@@ -865,7 +1023,7 @@
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -EDESTADDRREQ;
 
-		fl.fl_ip_dport = inet->dport;
+		fl.fl_ip_dport = inet->inet_dport;
 		daddr = &np->daddr;
 		fl.fl6_flowlabel = np->flow_label;
 		connected = 1;
@@ -877,6 +1035,8 @@
 	if (!fl.oif)
 		fl.oif = np->sticky_pktinfo.ipi6_ifindex;
 
+	fl.mark = sk->sk_mark;
+
 	if (msg->msg_controllen) {
 		opt = &opt_space;
 		memset(opt, 0, sizeof(struct ipv6_txoptions));
@@ -909,7 +1069,7 @@
 		fl.fl6_dst.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
 	if (ipv6_addr_any(&fl.fl6_src) && !ipv6_addr_any(&np->saddr))
 		ipv6_addr_copy(&fl.fl6_src, &np->saddr);
-	fl.fl_ip_sport = inet->sport;
+	fl.fl_ip_sport = inet->inet_sport;
 
 	/* merge ip6_build_xmit from ip6_output */
 	if (opt && opt->srcrt) {
@@ -1190,10 +1350,10 @@
 
 	dest  = &np->daddr;
 	src   = &np->rcv_saddr;
-	destp = ntohs(inet->dport);
-	srcp  = ntohs(inet->sport);
+	destp = ntohs(inet->inet_dport);
+	srcp  = ntohs(inet->inet_sport);
 	seq_printf(seq,
-		   "%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
+		   "%5d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
 		   "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
 		   bucket,
 		   src->s6_addr32[0], src->s6_addr32[1],
@@ -1282,7 +1442,6 @@
 	.protocol =  IPPROTO_UDP,
 	.prot =      &udpv6_prot,
 	.ops =       &inet6_dgram_ops,
-	.capability =-1,
 	.no_check =  UDP_CSUM_DEFAULT,
 	.flags =     INET_PROTOSW_PERMANENT,
 };
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index d737a27..6ea6938 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -62,7 +62,6 @@
 	.protocol	= IPPROTO_UDPLITE,
 	.prot		= &udplitev6_prot,
 	.ops		= &inet6_dgram_ops,
-	.capability	= -1,
 	.no_check	= 0,
 	.flags		= INET_PROTOSW_PERMANENT,
 };
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 8ec3d45..7254e3f 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -309,7 +309,6 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table xfrm6_policy_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "xfrm6_gc_thresh",
 		.data	   	= &xfrm6_dst_ops.gc_thresh,
 		.maxlen	 	= sizeof(int),
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 81a95c0..438831d 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -23,7 +23,7 @@
  */
 #include <linux/module.h>
 #include <linux/xfrm.h>
-#include <linux/list.h>
+#include <linux/rculist.h>
 #include <net/ip.h>
 #include <net/xfrm.h>
 #include <net/ipv6.h>
@@ -36,14 +36,15 @@
  * per xfrm_address_t.
  */
 struct xfrm6_tunnel_spi {
-	struct hlist_node list_byaddr;
-	struct hlist_node list_byspi;
-	xfrm_address_t addr;
-	u32 spi;
-	atomic_t refcnt;
+	struct hlist_node	list_byaddr;
+	struct hlist_node	list_byspi;
+	xfrm_address_t		addr;
+	u32			spi;
+	atomic_t		refcnt;
+	struct rcu_head		rcu_head;
 };
 
-static DEFINE_RWLOCK(xfrm6_tunnel_spi_lock);
+static DEFINE_SPINLOCK(xfrm6_tunnel_spi_lock);
 
 static u32 xfrm6_tunnel_spi;
 
@@ -107,6 +108,7 @@
 		if (!hlist_empty(&xfrm6_tunnel_spi_byspi[i]))
 			return;
 	}
+	rcu_barrier();
 	kmem_cache_destroy(xfrm6_tunnel_spi_kmem);
 	xfrm6_tunnel_spi_kmem = NULL;
 }
@@ -116,7 +118,7 @@
 	struct xfrm6_tunnel_spi *x6spi;
 	struct hlist_node *pos;
 
-	hlist_for_each_entry(x6spi, pos,
+	hlist_for_each_entry_rcu(x6spi, pos,
 			     &xfrm6_tunnel_spi_byaddr[xfrm6_tunnel_spi_hash_byaddr(saddr)],
 			     list_byaddr) {
 		if (memcmp(&x6spi->addr, saddr, sizeof(x6spi->addr)) == 0)
@@ -131,10 +133,10 @@
 	struct xfrm6_tunnel_spi *x6spi;
 	u32 spi;
 
-	read_lock_bh(&xfrm6_tunnel_spi_lock);
+	rcu_read_lock_bh();
 	x6spi = __xfrm6_tunnel_spi_lookup(saddr);
 	spi = x6spi ? x6spi->spi : 0;
-	read_unlock_bh(&xfrm6_tunnel_spi_lock);
+	rcu_read_unlock_bh();
 	return htonl(spi);
 }
 
@@ -185,14 +187,15 @@
 	if (!x6spi)
 		goto out;
 
+	INIT_RCU_HEAD(&x6spi->rcu_head);
 	memcpy(&x6spi->addr, saddr, sizeof(x6spi->addr));
 	x6spi->spi = spi;
 	atomic_set(&x6spi->refcnt, 1);
 
-	hlist_add_head(&x6spi->list_byspi, &xfrm6_tunnel_spi_byspi[index]);
+	hlist_add_head_rcu(&x6spi->list_byspi, &xfrm6_tunnel_spi_byspi[index]);
 
 	index = xfrm6_tunnel_spi_hash_byaddr(saddr);
-	hlist_add_head(&x6spi->list_byaddr, &xfrm6_tunnel_spi_byaddr[index]);
+	hlist_add_head_rcu(&x6spi->list_byaddr, &xfrm6_tunnel_spi_byaddr[index]);
 out:
 	return spi;
 }
@@ -202,26 +205,32 @@
 	struct xfrm6_tunnel_spi *x6spi;
 	u32 spi;
 
-	write_lock_bh(&xfrm6_tunnel_spi_lock);
+	spin_lock_bh(&xfrm6_tunnel_spi_lock);
 	x6spi = __xfrm6_tunnel_spi_lookup(saddr);
 	if (x6spi) {
 		atomic_inc(&x6spi->refcnt);
 		spi = x6spi->spi;
 	} else
 		spi = __xfrm6_tunnel_alloc_spi(saddr);
-	write_unlock_bh(&xfrm6_tunnel_spi_lock);
+	spin_unlock_bh(&xfrm6_tunnel_spi_lock);
 
 	return htonl(spi);
 }
 
 EXPORT_SYMBOL(xfrm6_tunnel_alloc_spi);
 
+static void x6spi_destroy_rcu(struct rcu_head *head)
+{
+	kmem_cache_free(xfrm6_tunnel_spi_kmem,
+			container_of(head, struct xfrm6_tunnel_spi, rcu_head));
+}
+
 void xfrm6_tunnel_free_spi(xfrm_address_t *saddr)
 {
 	struct xfrm6_tunnel_spi *x6spi;
 	struct hlist_node *pos, *n;
 
-	write_lock_bh(&xfrm6_tunnel_spi_lock);
+	spin_lock_bh(&xfrm6_tunnel_spi_lock);
 
 	hlist_for_each_entry_safe(x6spi, pos, n,
 				  &xfrm6_tunnel_spi_byaddr[xfrm6_tunnel_spi_hash_byaddr(saddr)],
@@ -229,14 +238,14 @@
 	{
 		if (memcmp(&x6spi->addr, saddr, sizeof(x6spi->addr)) == 0) {
 			if (atomic_dec_and_test(&x6spi->refcnt)) {
-				hlist_del(&x6spi->list_byaddr);
-				hlist_del(&x6spi->list_byspi);
-				kmem_cache_free(xfrm6_tunnel_spi_kmem, x6spi);
+				hlist_del_rcu(&x6spi->list_byaddr);
+				hlist_del_rcu(&x6spi->list_byspi);
+				call_rcu(&x6spi->rcu_head, x6spi_destroy_rcu);
 				break;
 			}
 		}
 	}
-	write_unlock_bh(&xfrm6_tunnel_spi_lock);
+	spin_unlock_bh(&xfrm6_tunnel_spi_lock);
 }
 
 EXPORT_SYMBOL(xfrm6_tunnel_free_spi);
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 66c7a20..f9759b5 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1298,6 +1298,7 @@
 	int opt;
 	int rc = -EINVAL;
 
+	lock_kernel();
 	if (optlen != sizeof(int))
 		goto out;
 
@@ -1312,6 +1313,7 @@
 	ipx_sk(sk)->type = opt;
 	rc = 0;
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -1323,6 +1325,7 @@
 	int len;
 	int rc = -ENOPROTOOPT;
 
+	lock_kernel();
 	if (!(level == SOL_IPX && optname == IPX_TYPE))
 		goto out;
 
@@ -1343,6 +1346,7 @@
 
 	rc = 0;
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -1352,12 +1356,13 @@
 	.obj_size = sizeof(struct ipx_sock),
 };
 
-static int ipx_create(struct net *net, struct socket *sock, int protocol)
+static int ipx_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	int rc = -ESOCKTNOSUPPORT;
 	struct sock *sk;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	/*
@@ -1390,6 +1395,7 @@
 	if (!sk)
 		goto out;
 
+	lock_kernel();
 	if (!sock_flag(sk, SOCK_DEAD))
 		sk->sk_state_change(sk);
 
@@ -1397,6 +1403,7 @@
 	sock->sk = NULL;
 	sk_refcnt_debug_release(sk);
 	ipx_destroy_socket(sk);
+	unlock_kernel();
 out:
 	return 0;
 }
@@ -1424,7 +1431,8 @@
 	return htons(socketNum);
 }
 
-static int ipx_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
+static int __ipx_bind(struct socket *sock,
+			struct sockaddr *uaddr, int addr_len)
 {
 	struct sock *sk = sock->sk;
 	struct ipx_sock *ipxs = ipx_sk(sk);
@@ -1519,6 +1527,17 @@
 	return rc;
 }
 
+static int ipx_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
+{
+	int rc;
+
+	lock_kernel();
+	rc = __ipx_bind(sock, uaddr, addr_len);
+	unlock_kernel();
+
+	return rc;
+}
+
 static int ipx_connect(struct socket *sock, struct sockaddr *uaddr,
 	int addr_len, int flags)
 {
@@ -1531,6 +1550,7 @@
 	sk->sk_state	= TCP_CLOSE;
 	sock->state 	= SS_UNCONNECTED;
 
+	lock_kernel();
 	if (addr_len != sizeof(*addr))
 		goto out;
 	addr = (struct sockaddr_ipx *)uaddr;
@@ -1550,7 +1570,7 @@
 			IPX_NODE_LEN);
 #endif	/* CONFIG_IPX_INTERN */
 
-		rc = ipx_bind(sock, (struct sockaddr *)&uaddr,
+		rc = __ipx_bind(sock, (struct sockaddr *)&uaddr,
 			      sizeof(struct sockaddr_ipx));
 		if (rc)
 			goto out;
@@ -1577,6 +1597,7 @@
 		ipxrtr_put(rt);
 	rc = 0;
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -1592,6 +1613,7 @@
 
 	*uaddr_len = sizeof(struct sockaddr_ipx);
 
+	lock_kernel();
 	if (peer) {
 		rc = -ENOTCONN;
 		if (sk->sk_state != TCP_ESTABLISHED)
@@ -1626,6 +1648,19 @@
 
 	rc = 0;
 out:
+	unlock_kernel();
+	return rc;
+}
+
+static unsigned int ipx_datagram_poll(struct file *file, struct socket *sock,
+			   poll_table *wait)
+{
+	int rc;
+
+	lock_kernel();
+	rc = datagram_poll(file, sock, wait);
+	unlock_kernel();
+
 	return rc;
 }
 
@@ -1700,6 +1735,7 @@
 	int rc = -EINVAL;
 	int flags = msg->msg_flags;
 
+	lock_kernel();
 	/* Socket gets bound below anyway */
 /*	if (sk->sk_zapped)
 		return -EIO; */	/* Socket not bound */
@@ -1723,7 +1759,7 @@
 			memcpy(uaddr.sipx_node, ipxs->intrfc->if_node,
 				IPX_NODE_LEN);
 #endif
-			rc = ipx_bind(sock, (struct sockaddr *)&uaddr,
+			rc = __ipx_bind(sock, (struct sockaddr *)&uaddr,
 					sizeof(struct sockaddr_ipx));
 			if (rc)
 				goto out;
@@ -1751,6 +1787,7 @@
 	if (rc >= 0)
 		rc = len;
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -1765,6 +1802,7 @@
 	struct sk_buff *skb;
 	int copied, rc;
 
+	lock_kernel();
 	/* put the autobinding in */
 	if (!ipxs->port) {
 		struct sockaddr_ipx uaddr;
@@ -1779,7 +1817,7 @@
 		memcpy(uaddr.sipx_node, ipxs->intrfc->if_node, IPX_NODE_LEN);
 #endif	/* CONFIG_IPX_INTERN */
 
-		rc = ipx_bind(sock, (struct sockaddr *)&uaddr,
+		rc = __ipx_bind(sock, (struct sockaddr *)&uaddr,
 			      sizeof(struct sockaddr_ipx));
 		if (rc)
 			goto out;
@@ -1823,6 +1861,7 @@
 out_free:
 	skb_free_datagram(sk, skb);
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -1834,6 +1873,7 @@
 	struct sock *sk = sock->sk;
 	void __user *argp = (void __user *)arg;
 
+	lock_kernel();
 	switch (cmd) {
 	case TIOCOUTQ:
 		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
@@ -1896,6 +1936,7 @@
 		rc = -ENOIOCTLCMD;
 		break;
 	}
+	unlock_kernel();
 
 	return rc;
 }
@@ -1927,13 +1968,13 @@
  * Socket family declarations
  */
 
-static struct net_proto_family ipx_family_ops = {
+static const struct net_proto_family ipx_family_ops = {
 	.family		= PF_IPX,
 	.create		= ipx_create,
 	.owner		= THIS_MODULE,
 };
 
-static const struct proto_ops SOCKOPS_WRAPPED(ipx_dgram_ops) = {
+static const struct proto_ops ipx_dgram_ops = {
 	.family		= PF_IPX,
 	.owner		= THIS_MODULE,
 	.release	= ipx_release,
@@ -1942,7 +1983,7 @@
 	.socketpair	= sock_no_socketpair,
 	.accept		= sock_no_accept,
 	.getname	= ipx_getname,
-	.poll		= datagram_poll,
+	.poll		= ipx_datagram_poll,
 	.ioctl		= ipx_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ipx_compat_ioctl,
@@ -1957,8 +1998,6 @@
 	.sendpage	= sock_no_sendpage,
 };
 
-SOCKOPS_WRAP(ipx_dgram, PF_IPX);
-
 static struct packet_type ipx_8023_packet_type __read_mostly = {
 	.type		= cpu_to_be16(ETH_P_802_3),
 	.func		= ipx_rcv,
diff --git a/net/ipx/sysctl_net_ipx.c b/net/ipx/sysctl_net_ipx.c
index 633fcab..bd6dca0 100644
--- a/net/ipx/sysctl_net_ipx.c
+++ b/net/ipx/sysctl_net_ipx.c
@@ -18,19 +18,18 @@
 
 static struct ctl_table ipx_table[] = {
 	{
-		.ctl_name	= NET_IPX_PPROP_BROADCASTING,
 		.procname	= "ipx_pprop_broadcasting",
 		.data		= &sysctl_ipx_pprop_broadcasting,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{ 0 },
+	{ },
 };
 
 static struct ctl_path ipx_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipx", .ctl_name = NET_IPX, },
+	{ .procname = "net", },
+	{ .procname = "ipx", },
 	{ }
 };
 
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index dd35641..10093aa 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -61,7 +61,7 @@
 
 #include <net/irda/af_irda.h>
 
-static int irda_create(struct net *net, struct socket *sock, int protocol);
+static int irda_create(struct net *net, struct socket *sock, int protocol, int kern);
 
 static const struct proto_ops irda_stream_ops;
 static const struct proto_ops irda_seqpacket_ops;
@@ -714,11 +714,14 @@
 	struct sockaddr_irda saddr;
 	struct sock *sk = sock->sk;
 	struct irda_sock *self = irda_sk(sk);
+	int err;
 
+	lock_kernel();
 	memset(&saddr, 0, sizeof(saddr));
 	if (peer) {
+		err  = -ENOTCONN;
 		if (sk->sk_state != TCP_ESTABLISHED)
-			return -ENOTCONN;
+			goto out;
 
 		saddr.sir_family = AF_IRDA;
 		saddr.sir_lsap_sel = self->dtsap_sel;
@@ -735,8 +738,10 @@
 	/* uaddr_len come to us uninitialised */
 	*uaddr_len = sizeof (struct sockaddr_irda);
 	memcpy(uaddr, &saddr, *uaddr_len);
-
-	return 0;
+	err = 0;
+out:
+	unlock_kernel();
+	return err;
 }
 
 /*
@@ -748,21 +753,25 @@
 static int irda_listen(struct socket *sock, int backlog)
 {
 	struct sock *sk = sock->sk;
+	int err = -EOPNOTSUPP;
 
 	IRDA_DEBUG(2, "%s()\n", __func__);
 
+	lock_kernel();
 	if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) &&
 	    (sk->sk_type != SOCK_DGRAM))
-		return -EOPNOTSUPP;
+		goto out;
 
 	if (sk->sk_state != TCP_LISTEN) {
 		sk->sk_max_ack_backlog = backlog;
 		sk->sk_state           = TCP_LISTEN;
 
-		return 0;
+		err = 0;
 	}
+out:
+	unlock_kernel();
 
-	return -EOPNOTSUPP;
+	return err;
 }
 
 /*
@@ -783,36 +792,40 @@
 	if (addr_len != sizeof(struct sockaddr_irda))
 		return -EINVAL;
 
+	lock_kernel();
 #ifdef CONFIG_IRDA_ULTRA
 	/* Special care for Ultra sockets */
 	if ((sk->sk_type == SOCK_DGRAM) &&
 	    (sk->sk_protocol == IRDAPROTO_ULTRA)) {
 		self->pid = addr->sir_lsap_sel;
+		err = -EOPNOTSUPP;
 		if (self->pid & 0x80) {
 			IRDA_DEBUG(0, "%s(), extension in PID not supp!\n", __func__);
-			return -EOPNOTSUPP;
+			goto out;
 		}
 		err = irda_open_lsap(self, self->pid);
 		if (err < 0)
-			return err;
+			goto out;
 
 		/* Pretend we are connected */
 		sock->state = SS_CONNECTED;
 		sk->sk_state   = TCP_ESTABLISHED;
+		err = 0;
 
-		return 0;
+		goto out;
 	}
 #endif /* CONFIG_IRDA_ULTRA */
 
 	self->ias_obj = irias_new_object(addr->sir_name, jiffies);
+	err = -ENOMEM;
 	if (self->ias_obj == NULL)
-		return -ENOMEM;
+		goto out;
 
 	err = irda_open_tsap(self, addr->sir_lsap_sel, addr->sir_name);
 	if (err < 0) {
 		kfree(self->ias_obj->name);
 		kfree(self->ias_obj);
-		return err;
+		goto out;
 	}
 
 	/*  Register with LM-IAS */
@@ -820,7 +833,10 @@
 				 self->stsap_sel, IAS_KERNEL_ATTR);
 	irias_insert_object(self->ias_obj);
 
-	return 0;
+	err = 0;
+out:
+	unlock_kernel();
+	return err;
 }
 
 /*
@@ -839,22 +855,26 @@
 
 	IRDA_DEBUG(2, "%s()\n", __func__);
 
-	err = irda_create(sock_net(sk), newsock, sk->sk_protocol);
+	lock_kernel();
+	err = irda_create(sock_net(sk), newsock, sk->sk_protocol, 0);
 	if (err)
-		return err;
+		goto out;
 
+	err = -EINVAL;
 	if (sock->state != SS_UNCONNECTED)
-		return -EINVAL;
+		goto out;
 
 	if ((sk = sock->sk) == NULL)
-		return -EINVAL;
+		goto out;
 
+	err = -EOPNOTSUPP;
 	if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) &&
 	    (sk->sk_type != SOCK_DGRAM))
-		return -EOPNOTSUPP;
+		goto out;
 
+	err = -EINVAL;
 	if (sk->sk_state != TCP_LISTEN)
-		return -EINVAL;
+		goto out;
 
 	/*
 	 *	The read queue this time is holding sockets ready to use
@@ -875,18 +895,20 @@
 			break;
 
 		/* Non blocking operation */
+		err = -EWOULDBLOCK;
 		if (flags & O_NONBLOCK)
-			return -EWOULDBLOCK;
+			goto out;
 
 		err = wait_event_interruptible(*(sk->sk_sleep),
 					skb_peek(&sk->sk_receive_queue));
 		if (err)
-			return err;
+			goto out;
 	}
 
 	newsk = newsock->sk;
+	err = -EIO;
 	if (newsk == NULL)
-		return -EIO;
+		goto out;
 
 	newsk->sk_state = TCP_ESTABLISHED;
 
@@ -894,10 +916,11 @@
 
 	/* Now attach up the new socket */
 	new->tsap = irttp_dup(self->tsap, new);
+	err = -EPERM; /* value does not seem to make sense. -arnd */
 	if (!new->tsap) {
 		IRDA_DEBUG(0, "%s(), dup failed!\n", __func__);
 		kfree_skb(skb);
-		return -1;
+		goto out;
 	}
 
 	new->stsap_sel = new->tsap->stsap_sel;
@@ -921,8 +944,10 @@
 	newsock->state = SS_CONNECTED;
 
 	irda_connect_response(new);
-
-	return 0;
+	err = 0;
+out:
+	unlock_kernel();
+	return err;
 }
 
 /*
@@ -955,28 +980,34 @@
 
 	IRDA_DEBUG(2, "%s(%p)\n", __func__, self);
 
+	lock_kernel();
 	/* Don't allow connect for Ultra sockets */
+	err = -ESOCKTNOSUPPORT;
 	if ((sk->sk_type == SOCK_DGRAM) && (sk->sk_protocol == IRDAPROTO_ULTRA))
-		return -ESOCKTNOSUPPORT;
+		goto out;
 
 	if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) {
 		sock->state = SS_CONNECTED;
-		return 0;   /* Connect completed during a ERESTARTSYS event */
+		err = 0;
+		goto out;   /* Connect completed during a ERESTARTSYS event */
 	}
 
 	if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) {
 		sock->state = SS_UNCONNECTED;
-		return -ECONNREFUSED;
+		err = -ECONNREFUSED;
+		goto out;
 	}
 
+	err = -EISCONN;      /* No reconnect on a seqpacket socket */
 	if (sk->sk_state == TCP_ESTABLISHED)
-		return -EISCONN;      /* No reconnect on a seqpacket socket */
+		goto out;
 
 	sk->sk_state   = TCP_CLOSE;
 	sock->state = SS_UNCONNECTED;
 
+	err = -EINVAL;
 	if (addr_len != sizeof(struct sockaddr_irda))
-		return -EINVAL;
+		goto out;
 
 	/* Check if user supplied any destination device address */
 	if ((!addr->sir_addr) || (addr->sir_addr == DEV_ADDR_ANY)) {
@@ -984,7 +1015,7 @@
 		err = irda_discover_daddr_and_lsap_sel(self, addr->sir_name);
 		if (err) {
 			IRDA_DEBUG(0, "%s(), auto-connect failed!\n", __func__);
-			return err;
+			goto out;
 		}
 	} else {
 		/* Use the one provided by the user */
@@ -1000,7 +1031,7 @@
 			err = irda_find_lsap_sel(self, addr->sir_name);
 			if (err) {
 				IRDA_DEBUG(0, "%s(), connect failed!\n", __func__);
-				return err;
+				goto out;
 			}
 		} else {
 			/* Directly connect to the remote LSAP
@@ -1025,29 +1056,35 @@
 				    self->max_sdu_size_rx, NULL);
 	if (err) {
 		IRDA_DEBUG(0, "%s(), connect failed!\n", __func__);
-		return err;
+		goto out;
 	}
 
 	/* Now the loop */
+	err = -EINPROGRESS;
 	if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK))
-		return -EINPROGRESS;
+		goto out;
 
+	err = -ERESTARTSYS;
 	if (wait_event_interruptible(*(sk->sk_sleep),
 				     (sk->sk_state != TCP_SYN_SENT)))
-		return -ERESTARTSYS;
+		goto out;
 
 	if (sk->sk_state != TCP_ESTABLISHED) {
 		sock->state = SS_UNCONNECTED;
 		err = sock_error(sk);
-		return err? err : -ECONNRESET;
+		if (!err)
+			err = -ECONNRESET;
+		goto out;
 	}
 
 	sock->state = SS_CONNECTED;
 
 	/* At this point, IrLMP has assigned our source address */
 	self->saddr = irttp_get_saddr(self->tsap);
-
-	return 0;
+	err = 0;
+out:
+	unlock_kernel();
+	return err;
 }
 
 static struct proto irda_proto = {
@@ -1062,7 +1099,8 @@
  *    Create IrDA socket
  *
  */
-static int irda_create(struct net *net, struct socket *sock, int protocol)
+static int irda_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	struct irda_sock *self;
@@ -1192,6 +1230,7 @@
 	if (sk == NULL)
 		return 0;
 
+	lock_kernel();
 	lock_sock(sk);
 	sk->sk_state       = TCP_CLOSE;
 	sk->sk_shutdown   |= SEND_SHUTDOWN;
@@ -1210,6 +1249,7 @@
 	/* Destroy networking socket if we are the last reference on it,
 	 * i.e. if(sk->sk_refcnt == 0) -> sk_free(sk) */
 	sock_put(sk);
+	unlock_kernel();
 
 	/* Notes on socket locking and deallocation... - Jean II
 	 * In theory we should put pairs of sock_hold() / sock_put() to
@@ -1257,28 +1297,37 @@
 
 	IRDA_DEBUG(4, "%s(), len=%zd\n", __func__, len);
 
+	lock_kernel();
 	/* Note : socket.c set MSG_EOR on SEQPACKET sockets */
 	if (msg->msg_flags & ~(MSG_DONTWAIT | MSG_EOR | MSG_CMSG_COMPAT |
-			       MSG_NOSIGNAL))
-		return -EINVAL;
+			       MSG_NOSIGNAL)) {
+		err = -EINVAL;
+		goto out;
+	}
 
 	if (sk->sk_shutdown & SEND_SHUTDOWN)
 		goto out_err;
 
-	if (sk->sk_state != TCP_ESTABLISHED)
-		return -ENOTCONN;
+	if (sk->sk_state != TCP_ESTABLISHED) {
+		err = -ENOTCONN;
+		goto out;
+	}
 
 	self = irda_sk(sk);
 
 	/* Check if IrTTP is wants us to slow down */
 
 	if (wait_event_interruptible(*(sk->sk_sleep),
-	    (self->tx_flow != FLOW_STOP  ||  sk->sk_state != TCP_ESTABLISHED)))
-		return -ERESTARTSYS;
+	    (self->tx_flow != FLOW_STOP  ||  sk->sk_state != TCP_ESTABLISHED))) {
+		err = -ERESTARTSYS;
+		goto out;
+	}
 
 	/* Check if we are still connected */
-	if (sk->sk_state != TCP_ESTABLISHED)
-		return -ENOTCONN;
+	if (sk->sk_state != TCP_ESTABLISHED) {
+		err = -ENOTCONN;
+		goto out;
+	}
 
 	/* Check that we don't send out too big frames */
 	if (len > self->max_data_size) {
@@ -1310,11 +1359,16 @@
 		IRDA_DEBUG(0, "%s(), err=%d\n", __func__, err);
 		goto out_err;
 	}
+
+	unlock_kernel();
 	/* Tell client how much data we actually sent */
 	return len;
 
- out_err:
-	return sk_stream_error(sk, msg->msg_flags, err);
+out_err:
+	err = sk_stream_error(sk, msg->msg_flags, err);
+out:
+	unlock_kernel();
+	return err;
 
 }
 
@@ -1335,13 +1389,14 @@
 
 	IRDA_DEBUG(4, "%s()\n", __func__);
 
+	lock_kernel();
 	if ((err = sock_error(sk)) < 0)
-		return err;
+		goto out;
 
 	skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
 				flags & MSG_DONTWAIT, &err);
 	if (!skb)
-		return err;
+		goto out;
 
 	skb_reset_transport_header(skb);
 	copied = skb->len;
@@ -1369,8 +1424,12 @@
 			irttp_flow_request(self->tsap, FLOW_START);
 		}
 	}
-
+	unlock_kernel();
 	return copied;
+
+out:
+	unlock_kernel();
+	return err;
 }
 
 /*
@@ -1388,15 +1447,19 @@
 
 	IRDA_DEBUG(3, "%s()\n", __func__);
 
+	lock_kernel();
 	if ((err = sock_error(sk)) < 0)
-		return err;
+		goto out;
 
+	err = -EINVAL;
 	if (sock->flags & __SO_ACCEPTCON)
-		return(-EINVAL);
+		goto out;
 
+	err =-EOPNOTSUPP;
 	if (flags & MSG_OOB)
-		return -EOPNOTSUPP;
+		goto out;
 
+	err = 0;
 	target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
 	timeo = sock_rcvtimeo(sk, noblock);
 
@@ -1408,7 +1471,7 @@
 
 		if (skb == NULL) {
 			DEFINE_WAIT(wait);
-			int ret = 0;
+			err = 0;
 
 			if (copied >= target)
 				break;
@@ -1418,25 +1481,25 @@
 			/*
 			 *	POSIX 1003.1g mandates this order.
 			 */
-			ret = sock_error(sk);
-			if (ret)
+			err = sock_error(sk);
+			if (err)
 				;
 			else if (sk->sk_shutdown & RCV_SHUTDOWN)
 				;
 			else if (noblock)
-				ret = -EAGAIN;
+				err = -EAGAIN;
 			else if (signal_pending(current))
-				ret = sock_intr_errno(timeo);
+				err = sock_intr_errno(timeo);
 			else if (sk->sk_state != TCP_ESTABLISHED)
-				ret = -ENOTCONN;
+				err = -ENOTCONN;
 			else if (skb_peek(&sk->sk_receive_queue) == NULL)
 				/* Wait process until data arrives */
 				schedule();
 
 			finish_wait(sk->sk_sleep, &wait);
 
-			if (ret)
-				return ret;
+			if (err)
+				goto out;
 			if (sk->sk_shutdown & RCV_SHUTDOWN)
 				break;
 
@@ -1489,7 +1552,9 @@
 		}
 	}
 
-	return copied;
+out:
+	unlock_kernel();
+	return err ? : copied;
 }
 
 /*
@@ -1507,18 +1572,23 @@
 	struct sk_buff *skb;
 	int err;
 
+	lock_kernel();
+
 	IRDA_DEBUG(4, "%s(), len=%zd\n", __func__, len);
 
+	err = -EINVAL;
 	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
-		return -EINVAL;
+		goto out;
 
 	if (sk->sk_shutdown & SEND_SHUTDOWN) {
 		send_sig(SIGPIPE, current, 0);
-		return -EPIPE;
+		err = -EPIPE;
+		goto out;
 	}
 
+	err = -ENOTCONN;
 	if (sk->sk_state != TCP_ESTABLISHED)
-		return -ENOTCONN;
+		goto out;
 
 	self = irda_sk(sk);
 
@@ -1535,8 +1605,9 @@
 
 	skb = sock_alloc_send_skb(sk, len + self->max_header_size,
 				  msg->msg_flags & MSG_DONTWAIT, &err);
+	err = -ENOBUFS;
 	if (!skb)
-		return -ENOBUFS;
+		goto out;
 
 	skb_reserve(skb, self->max_header_size);
 	skb_reset_transport_header(skb);
@@ -1546,7 +1617,7 @@
 	err = memcpy_fromiovec(skb_transport_header(skb), msg->msg_iov, len);
 	if (err) {
 		kfree_skb(skb);
-		return err;
+		goto out;
 	}
 
 	/*
@@ -1556,9 +1627,13 @@
 	err = irttp_udata_request(self->tsap, skb);
 	if (err) {
 		IRDA_DEBUG(0, "%s(), err=%d\n", __func__, err);
-		return err;
+		goto out;
 	}
+	unlock_kernel();
 	return len;
+out:
+	unlock_kernel();
+	return err;
 }
 
 /*
@@ -1580,12 +1655,15 @@
 
 	IRDA_DEBUG(4, "%s(), len=%zd\n", __func__, len);
 
+	lock_kernel();
+	err = -EINVAL;
 	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
-		return -EINVAL;
+		goto out;
 
+	err = -EPIPE;
 	if (sk->sk_shutdown & SEND_SHUTDOWN) {
 		send_sig(SIGPIPE, current, 0);
-		return -EPIPE;
+		goto out;
 	}
 
 	self = irda_sk(sk);
@@ -1593,16 +1671,18 @@
 	/* Check if an address was specified with sendto. Jean II */
 	if (msg->msg_name) {
 		struct sockaddr_irda *addr = (struct sockaddr_irda *) msg->msg_name;
+		err = -EINVAL;
 		/* Check address, extract pid. Jean II */
 		if (msg->msg_namelen < sizeof(*addr))
-			return -EINVAL;
+			goto out;
 		if (addr->sir_family != AF_IRDA)
-			return -EINVAL;
+			goto out;
 
 		pid = addr->sir_lsap_sel;
 		if (pid & 0x80) {
 			IRDA_DEBUG(0, "%s(), extension in PID not supp!\n", __func__);
-			return -EOPNOTSUPP;
+			err = -EOPNOTSUPP;
+			goto out;
 		}
 	} else {
 		/* Check that the socket is properly bound to an Ultra
@@ -1611,7 +1691,8 @@
 		    (sk->sk_state != TCP_ESTABLISHED)) {
 			IRDA_DEBUG(0, "%s(), socket not bound to Ultra PID.\n",
 				   __func__);
-			return -ENOTCONN;
+			err = -ENOTCONN;
+			goto out;
 		}
 		/* Use PID from socket */
 		bound = 1;
@@ -1630,8 +1711,9 @@
 
 	skb = sock_alloc_send_skb(sk, len + self->max_header_size,
 				  msg->msg_flags & MSG_DONTWAIT, &err);
+	err = -ENOBUFS;
 	if (!skb)
-		return -ENOBUFS;
+		goto out;
 
 	skb_reserve(skb, self->max_header_size);
 	skb_reset_transport_header(skb);
@@ -1641,16 +1723,16 @@
 	err = memcpy_fromiovec(skb_transport_header(skb), msg->msg_iov, len);
 	if (err) {
 		kfree_skb(skb);
-		return err;
+		goto out;
 	}
 
 	err = irlmp_connless_data_request((bound ? self->lsap : NULL),
 					  skb, pid);
-	if (err) {
+	if (err)
 		IRDA_DEBUG(0, "%s(), err=%d\n", __func__, err);
-		return err;
-	}
-	return len;
+out:
+	unlock_kernel();
+	return err ? : len;
 }
 #endif /* CONFIG_IRDA_ULTRA */
 
@@ -1664,6 +1746,8 @@
 
 	IRDA_DEBUG(1, "%s(%p)\n", __func__, self);
 
+	lock_kernel();
+
 	sk->sk_state       = TCP_CLOSE;
 	sk->sk_shutdown   |= SEND_SHUTDOWN;
 	sk->sk_state_change(sk);
@@ -1684,6 +1768,8 @@
 	self->daddr = DEV_ADDR_ANY;	/* Until we get re-connected */
 	self->saddr = 0x0;		/* so IrLMP assign us any link */
 
+	unlock_kernel();
+
 	return 0;
 }
 
@@ -1699,6 +1785,7 @@
 
 	IRDA_DEBUG(4, "%s()\n", __func__);
 
+	lock_kernel();
 	poll_wait(file, sk->sk_sleep, wait);
 	mask = 0;
 
@@ -1746,18 +1833,34 @@
 	default:
 		break;
 	}
+	unlock_kernel();
 	return mask;
 }
 
+static unsigned int irda_datagram_poll(struct file *file, struct socket *sock,
+			   poll_table *wait)
+{
+	int err;
+
+	lock_kernel();
+	err = datagram_poll(file, sock, wait);
+	unlock_kernel();
+
+	return err;
+}
+
 /*
  * Function irda_ioctl (sock, cmd, arg)
  */
 static int irda_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 {
 	struct sock *sk = sock->sk;
+	int err;
 
 	IRDA_DEBUG(4, "%s(), cmd=%#x\n", __func__, cmd);
 
+	lock_kernel();
+	err = -EINVAL;
 	switch (cmd) {
 	case TIOCOUTQ: {
 		long amount;
@@ -1765,9 +1868,8 @@
 		amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 		if (amount < 0)
 			amount = 0;
-		if (put_user(amount, (unsigned int __user *)arg))
-			return -EFAULT;
-		return 0;
+		err = put_user(amount, (unsigned int __user *)arg);
+		break;
 	}
 
 	case TIOCINQ: {
@@ -1776,15 +1878,14 @@
 		/* These two are safe on a single CPU system as only user tasks fiddle here */
 		if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
 			amount = skb->len;
-		if (put_user(amount, (unsigned int __user *)arg))
-			return -EFAULT;
-		return 0;
+		err = put_user(amount, (unsigned int __user *)arg);
+		break;
 	}
 
 	case SIOCGSTAMP:
 		if (sk != NULL)
-			return sock_get_timestamp(sk, (struct timeval __user *)arg);
-		return -EINVAL;
+			err = sock_get_timestamp(sk, (struct timeval __user *)arg);
+		break;
 
 	case SIOCGIFADDR:
 	case SIOCSIFADDR:
@@ -1796,14 +1897,14 @@
 	case SIOCSIFNETMASK:
 	case SIOCGIFMETRIC:
 	case SIOCSIFMETRIC:
-		return -EINVAL;
+		break;
 	default:
 		IRDA_DEBUG(1, "%s(), doing device ioctl!\n", __func__);
-		return -ENOIOCTLCMD;
+		err = -ENOIOCTLCMD;
 	}
+	unlock_kernel();
 
-	/*NOTREACHED*/
-	return 0;
+	return err;
 }
 
 #ifdef CONFIG_COMPAT
@@ -1825,7 +1926,7 @@
  *    Set some options for the socket
  *
  */
-static int irda_setsockopt(struct socket *sock, int level, int optname,
+static int __irda_setsockopt(struct socket *sock, int level, int optname,
 			   char __user *optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
@@ -2083,6 +2184,18 @@
 	return 0;
 }
 
+static int irda_setsockopt(struct socket *sock, int level, int optname,
+			   char __user *optval, unsigned int optlen)
+{
+	int err;
+
+	lock_kernel();
+	err = __irda_setsockopt(sock, level, optname, optval, optlen);
+	unlock_kernel();
+
+	return err;
+}
+
 /*
  * Function irda_extract_ias_value(ias_opt, ias_value)
  *
@@ -2135,7 +2248,7 @@
 /*
  * Function irda_getsockopt (sock, level, optname, optval, optlen)
  */
-static int irda_getsockopt(struct socket *sock, int level, int optname,
+static int __irda_getsockopt(struct socket *sock, int level, int optname,
 			   char __user *optval, int __user *optlen)
 {
 	struct sock *sk = sock->sk;
@@ -2463,13 +2576,25 @@
 	return 0;
 }
 
-static struct net_proto_family irda_family_ops = {
+static int irda_getsockopt(struct socket *sock, int level, int optname,
+			   char __user *optval, int __user *optlen)
+{
+	int err;
+
+	lock_kernel();
+	err = __irda_getsockopt(sock, level, optname, optval, optlen);
+	unlock_kernel();
+
+	return err;
+}
+
+static const struct net_proto_family irda_family_ops = {
 	.family = PF_IRDA,
 	.create = irda_create,
 	.owner	= THIS_MODULE,
 };
 
-static const struct proto_ops SOCKOPS_WRAPPED(irda_stream_ops) = {
+static const struct proto_ops irda_stream_ops = {
 	.family =	PF_IRDA,
 	.owner =	THIS_MODULE,
 	.release =	irda_release,
@@ -2493,7 +2618,7 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-static const struct proto_ops SOCKOPS_WRAPPED(irda_seqpacket_ops) = {
+static const struct proto_ops irda_seqpacket_ops = {
 	.family =	PF_IRDA,
 	.owner =	THIS_MODULE,
 	.release =	irda_release,
@@ -2502,7 +2627,7 @@
 	.socketpair =	sock_no_socketpair,
 	.accept =	irda_accept,
 	.getname =	irda_getname,
-	.poll =		datagram_poll,
+	.poll =		irda_datagram_poll,
 	.ioctl =	irda_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl =	irda_compat_ioctl,
@@ -2517,7 +2642,7 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-static const struct proto_ops SOCKOPS_WRAPPED(irda_dgram_ops) = {
+static const struct proto_ops irda_dgram_ops = {
 	.family =	PF_IRDA,
 	.owner =	THIS_MODULE,
 	.release =	irda_release,
@@ -2526,7 +2651,7 @@
 	.socketpair =	sock_no_socketpair,
 	.accept =	irda_accept,
 	.getname =	irda_getname,
-	.poll =		datagram_poll,
+	.poll =		irda_datagram_poll,
 	.ioctl =	irda_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl =	irda_compat_ioctl,
@@ -2542,7 +2667,7 @@
 };
 
 #ifdef CONFIG_IRDA_ULTRA
-static const struct proto_ops SOCKOPS_WRAPPED(irda_ultra_ops) = {
+static const struct proto_ops irda_ultra_ops = {
 	.family =	PF_IRDA,
 	.owner =	THIS_MODULE,
 	.release =	irda_release,
@@ -2551,7 +2676,7 @@
 	.socketpair =	sock_no_socketpair,
 	.accept =	sock_no_accept,
 	.getname =	irda_getname,
-	.poll =		datagram_poll,
+	.poll =		irda_datagram_poll,
 	.ioctl =	irda_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl =	irda_compat_ioctl,
@@ -2567,13 +2692,6 @@
 };
 #endif /* CONFIG_IRDA_ULTRA */
 
-SOCKOPS_WRAP(irda_stream, PF_IRDA);
-SOCKOPS_WRAP(irda_seqpacket, PF_IRDA);
-SOCKOPS_WRAP(irda_dgram, PF_IRDA);
-#ifdef CONFIG_IRDA_ULTRA
-SOCKOPS_WRAP(irda_ultra, PF_IRDA);
-#endif /* CONFIG_IRDA_ULTRA */
-
 /*
  * Function irsock_init (pro)
  *
diff --git a/net/irda/irnet/irnet_irda.c b/net/irda/irnet/irnet_irda.c
index cccc2e9..b26dee7 100644
--- a/net/irda/irnet/irnet_irda.c
+++ b/net/irda/irnet/irnet_irda.c
@@ -1403,8 +1403,8 @@
   /* Socket already connecting ? On primary ? */
   if(0
 #ifdef ALLOW_SIMULT_CONNECT
-     || ((irttp_is_primary(server->tsap) == 1)	/* primary */
-	 && (test_and_clear_bit(0, &new->ttp_connect)))
+     || ((irttp_is_primary(server->tsap) == 1) &&	/* primary */
+	 (test_and_clear_bit(0, &new->ttp_connect)))
 #endif /* ALLOW_SIMULT_CONNECT */
      )
     {
diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c
index 5c86567..d0b70da 100644
--- a/net/irda/irsysctl.c
+++ b/net/irda/irsysctl.c
@@ -113,26 +113,21 @@
 /* One file */
 static ctl_table irda_table[] = {
 	{
-		.ctl_name	= NET_IRDA_DISCOVERY,
 		.procname	= "discovery",
 		.data		= &sysctl_discovery,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= do_discovery,
-		.strategy       = sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_IRDA_DEVNAME,
 		.procname	= "devname",
 		.data		= sysctl_devname,
 		.maxlen		= 65,
 		.mode		= 0644,
 		.proc_handler	= do_devname,
-		.strategy	= sysctl_string
 	},
 #ifdef CONFIG_IRDA_DEBUG
 	{
-		.ctl_name	= NET_IRDA_DEBUG,
 		.procname	= "debug",
 		.data		= &irda_debug,
 		.maxlen		= sizeof(int),
@@ -142,7 +137,6 @@
 #endif
 #ifdef CONFIG_IRDA_FAST_RR
 	{
-		.ctl_name	= NET_IRDA_FAST_POLL,
 		.procname	= "fast_poll_increase",
 		.data		= &sysctl_fast_poll_increase,
 		.maxlen		= sizeof(int),
@@ -151,18 +145,15 @@
 	},
 #endif
 	{
-		.ctl_name	= NET_IRDA_DISCOVERY_SLOTS,
 		.procname	= "discovery_slots",
 		.data		= &sysctl_discovery_slots,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_discovery_slots,
 		.extra2		= &max_discovery_slots
 	},
 	{
-		.ctl_name	= NET_IRDA_DISCOVERY_TIMEOUT,
 		.procname	= "discovery_timeout",
 		.data		= &sysctl_discovery_timeout,
 		.maxlen		= sizeof(int),
@@ -170,99 +161,83 @@
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_IRDA_SLOT_TIMEOUT,
 		.procname	= "slot_timeout",
 		.data		= &sysctl_slot_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_slot_timeout,
 		.extra2		= &max_slot_timeout
 	},
 	{
-		.ctl_name	= NET_IRDA_MAX_BAUD_RATE,
 		.procname	= "max_baud_rate",
 		.data		= &sysctl_max_baud_rate,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_max_baud_rate,
 		.extra2		= &max_max_baud_rate
 	},
 	{
-		.ctl_name	= NET_IRDA_MIN_TX_TURN_TIME,
 		.procname	= "min_tx_turn_time",
 		.data		= &sysctl_min_tx_turn_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_min_tx_turn_time,
 		.extra2		= &max_min_tx_turn_time
 	},
 	{
-		.ctl_name	= NET_IRDA_MAX_TX_DATA_SIZE,
 		.procname	= "max_tx_data_size",
 		.data		= &sysctl_max_tx_data_size,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_max_tx_data_size,
 		.extra2		= &max_max_tx_data_size
 	},
 	{
-		.ctl_name	= NET_IRDA_MAX_TX_WINDOW,
 		.procname	= "max_tx_window",
 		.data		= &sysctl_max_tx_window,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_max_tx_window,
 		.extra2		= &max_max_tx_window
 	},
 	{
-		.ctl_name	= NET_IRDA_MAX_NOREPLY_TIME,
 		.procname	= "max_noreply_time",
 		.data		= &sysctl_max_noreply_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_max_noreply_time,
 		.extra2		= &max_max_noreply_time
 	},
 	{
-		.ctl_name	= NET_IRDA_WARN_NOREPLY_TIME,
 		.procname	= "warn_noreply_time",
 		.data		= &sysctl_warn_noreply_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_warn_noreply_time,
 		.extra2		= &max_warn_noreply_time
 	},
 	{
-		.ctl_name	= NET_IRDA_LAP_KEEPALIVE_TIME,
 		.procname	= "lap_keepalive_time",
 		.data		= &sysctl_lap_keepalive_time,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_lap_keepalive_time,
 		.extra2		= &max_lap_keepalive_time
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path irda_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "irda", .ctl_name = NET_IRDA, },
+	{ .procname = "net", },
+	{ .procname = "irda", },
 	{ }
 };
 
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index bada1b9..1e42886 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -428,7 +428,6 @@
 		break;
 
 	default:
-		sock_set_flag(sk, SOCK_ZAPPED);
 		/* nothing to do here */
 		break;
 	}
@@ -482,7 +481,8 @@
 }
 
 /* Create an IUCV socket */
-static int iucv_sock_create(struct net *net, struct socket *sock, int protocol)
+static int iucv_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -536,7 +536,7 @@
 	list_add_tail(&iucv_sk(sk)->accept_q, &par->accept_q);
 	spin_unlock_irqrestore(&par->accept_q_lock, flags);
 	iucv_sk(sk)->parent = parent;
-	parent->sk_ack_backlog++;
+	sk_acceptq_added(parent);
 }
 
 void iucv_accept_unlink(struct sock *sk)
@@ -547,7 +547,7 @@
 	spin_lock_irqsave(&par->accept_q_lock, flags);
 	list_del_init(&iucv_sk(sk)->accept_q);
 	spin_unlock_irqrestore(&par->accept_q_lock, flags);
-	iucv_sk(sk)->parent->sk_ack_backlog--;
+	sk_acceptq_removed(iucv_sk(sk)->parent);
 	iucv_sk(sk)->parent = NULL;
 	sock_put(sk);
 }
@@ -1715,7 +1715,7 @@
 	.getsockopt	= iucv_sock_getsockopt,
 };
 
-static struct net_proto_family iucv_sock_family_ops = {
+static const struct net_proto_family iucv_sock_family_ops = {
 	.family	= AF_IUCV,
 	.owner	= THIS_MODULE,
 	.create	= iucv_sock_create,
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index 3973d0e..3b1f5f5 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -1768,7 +1768,6 @@
  */
 static void iucv_work_fn(struct work_struct *work)
 {
-	typedef void iucv_irq_fn(struct iucv_irq_data *);
 	LIST_HEAD(work_queue);
 	struct iucv_irq_list *p, *n;
 
@@ -1878,14 +1877,25 @@
 static int iucv_pm_freeze(struct device *dev)
 {
 	int cpu;
+	struct iucv_irq_list *p, *n;
 	int rc = 0;
 
 #ifdef CONFIG_PM_DEBUG
 	printk(KERN_WARNING "iucv_pm_freeze\n");
 #endif
+	if (iucv_pm_state != IUCV_PM_FREEZING) {
+		for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
+			smp_call_function_single(cpu, iucv_block_cpu_almost,
+						 NULL, 1);
+		cancel_work_sync(&iucv_work);
+		list_for_each_entry_safe(p, n, &iucv_work_queue, list) {
+			list_del_init(&p->list);
+			iucv_sever_pathid(p->data.ippathid,
+					  iucv_error_no_listener);
+			kfree(p);
+		}
+	}
 	iucv_pm_state = IUCV_PM_FREEZING;
-	for_each_cpu_mask_nr(cpu, iucv_irq_cpumask)
-		smp_call_function_single(cpu, iucv_block_cpu_almost, NULL, 1);
 	if (dev->driver && dev->driver->pm && dev->driver->pm->freeze)
 		rc = dev->driver->pm->freeze(dev);
 	if (iucv_path_table_empty())
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 4e98193..84209fb 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -35,7 +35,7 @@
 #define _X2KEY(x) ((x) == XFRM_INF ? 0 : (x))
 #define _KEY2X(x) ((x) == 0 ? XFRM_INF : (x))
 
-static int pfkey_net_id;
+static int pfkey_net_id __read_mostly;
 struct netns_pfkey {
 	/* List of all pfkey sockets. */
 	struct hlist_head table;
@@ -177,7 +177,8 @@
 	.obj_size = sizeof(struct pfkey_sock),
 };
 
-static int pfkey_create(struct net *net, struct socket *sock, int protocol)
+static int pfkey_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct netns_pfkey *net_pfkey = net_generic(net, pfkey_net_id);
 	struct sock *sk;
@@ -3606,7 +3607,7 @@
 	if (err)
 		goto out_free;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	err = (flags & MSG_TRUNC) ? skb->len : copied;
 
@@ -3644,7 +3645,7 @@
 	.recvmsg	=	pfkey_recvmsg,
 };
 
-static struct net_proto_family pfkey_family_ops = {
+static const struct net_proto_family pfkey_family_ops = {
 	.family	=	PF_KEY,
 	.create	=	pfkey_create,
 	.owner	=	THIS_MODULE,
@@ -3764,28 +3765,14 @@
 
 static int __net_init pfkey_net_init(struct net *net)
 {
-	struct netns_pfkey *net_pfkey;
+	struct netns_pfkey *net_pfkey = net_generic(net, pfkey_net_id);
 	int rv;
 
-	net_pfkey = kmalloc(sizeof(struct netns_pfkey), GFP_KERNEL);
-	if (!net_pfkey) {
-		rv = -ENOMEM;
-		goto out_kmalloc;
-	}
 	INIT_HLIST_HEAD(&net_pfkey->table);
 	atomic_set(&net_pfkey->socks_nr, 0);
-	rv = net_assign_generic(net, pfkey_net_id, net_pfkey);
-	if (rv < 0)
-		goto out_assign;
-	rv = pfkey_init_proc(net);
-	if (rv < 0)
-		goto out_proc;
-	return 0;
 
-out_proc:
-out_assign:
-	kfree(net_pfkey);
-out_kmalloc:
+	rv = pfkey_init_proc(net);
+
 	return rv;
 }
 
@@ -3795,17 +3782,18 @@
 
 	pfkey_exit_proc(net);
 	BUG_ON(!hlist_empty(&net_pfkey->table));
-	kfree(net_pfkey);
 }
 
 static struct pernet_operations pfkey_net_ops = {
 	.init = pfkey_net_init,
 	.exit = pfkey_net_exit,
+	.id   = &pfkey_net_id,
+	.size = sizeof(struct netns_pfkey),
 };
 
 static void __exit ipsec_pfkey_exit(void)
 {
-	unregister_pernet_gen_subsys(pfkey_net_id, &pfkey_net_ops);
+	unregister_pernet_subsys(&pfkey_net_ops);
 	xfrm_unregister_km(&pfkeyv2_mgr);
 	sock_unregister(PF_KEY);
 	proto_unregister(&key_proto);
@@ -3824,7 +3812,7 @@
 	err = xfrm_register_km(&pfkeyv2_mgr);
 	if (err != 0)
 		goto out_sock_unregister;
-	err = register_pernet_gen_subsys(&pfkey_net_id, &pfkey_net_ops);
+	err = register_pernet_subsys(&pfkey_net_ops);
 	if (err != 0)
 		goto out_xfrm_unregister_km;
 out:
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 7aa4fd1..3a66546 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -140,14 +140,17 @@
 
 /**
  *	llc_ui_create - alloc and init a new llc_ui socket
+ *	@net: network namespace (must be default network)
  *	@sock: Socket to initialize and attach allocated sk to.
  *	@protocol: Unused.
+ *	@kern: on behalf of kernel or userspace
  *
  *	Allocate and initialize a new llc_ui socket, validate the user wants a
  *	socket type we have available.
  *	Returns 0 upon success, negative upon failure.
  */
-static int llc_ui_create(struct net *net, struct socket *sock, int protocol)
+static int llc_ui_create(struct net *net, struct socket *sock, int protocol,
+			 int kern)
 {
 	struct sock *sk;
 	int rc = -ESOCKTNOSUPPORT;
@@ -155,7 +158,7 @@
 	if (!capable(CAP_NET_RAW))
 		return -EPERM;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	if (likely(sock->type == SOCK_DGRAM || sock->type == SOCK_STREAM)) {
@@ -1092,7 +1095,7 @@
 	return rc;
 }
 
-static struct net_proto_family llc_ui_family_ops = {
+static const struct net_proto_family llc_ui_family_ops = {
 	.family = PF_LLC,
 	.create = llc_ui_create,
 	.owner	= THIS_MODULE,
diff --git a/net/llc/sysctl_net_llc.c b/net/llc/sysctl_net_llc.c
index 57b9304..e2ebe35 100644
--- a/net/llc/sysctl_net_llc.c
+++ b/net/llc/sysctl_net_llc.c
@@ -15,86 +15,73 @@
 
 static struct ctl_table llc2_timeout_table[] = {
 	{
-		.ctl_name	= NET_LLC2_ACK_TIMEOUT,
 		.procname	= "ack",
 		.data		= &sysctl_llc2_ack_timeout,
 		.maxlen		= sizeof(long),
 		.mode		= 0644,
 		.proc_handler   = proc_dointvec_jiffies,
-		.strategy       = sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_LLC2_BUSY_TIMEOUT,
 		.procname	= "busy",
 		.data		= &sysctl_llc2_busy_timeout,
 		.maxlen		= sizeof(long),
 		.mode		= 0644,
 		.proc_handler   = proc_dointvec_jiffies,
-		.strategy       = sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_LLC2_P_TIMEOUT,
 		.procname	= "p",
 		.data		= &sysctl_llc2_p_timeout,
 		.maxlen		= sizeof(long),
 		.mode		= 0644,
 		.proc_handler   = proc_dointvec_jiffies,
-		.strategy       = sysctl_jiffies,
 	},
 	{
-		.ctl_name	= NET_LLC2_REJ_TIMEOUT,
 		.procname	= "rej",
 		.data		= &sysctl_llc2_rej_timeout,
 		.maxlen		= sizeof(long),
 		.mode		= 0644,
 		.proc_handler   = proc_dointvec_jiffies,
-		.strategy       = sysctl_jiffies,
 	},
-	{ 0 },
+	{ },
 };
 
 static struct ctl_table llc_station_table[] = {
 	{
-		.ctl_name	= NET_LLC_STATION_ACK_TIMEOUT,
 		.procname	= "ack_timeout",
 		.data		= &sysctl_llc_station_ack_timeout,
 		.maxlen		= sizeof(long),
 		.mode		= 0644,
 		.proc_handler   = proc_dointvec_jiffies,
-		.strategy       = sysctl_jiffies,
 	},
-	{ 0 },
+	{ },
 };
 
 static struct ctl_table llc2_dir_timeout_table[] = {
 	{
-		.ctl_name	= NET_LLC2,
 		.procname	= "timeout",
 		.mode		= 0555,
 		.child		= llc2_timeout_table,
 	},
-	{ 0 },
+	{ },
 };
 
 static struct ctl_table llc_table[] = {
 	{
-		.ctl_name	= NET_LLC2,
 		.procname	= "llc2",
 		.mode		= 0555,
 		.child		= llc2_dir_timeout_table,
 	},
 	{
-		.ctl_name       = NET_LLC_STATION,
 		.procname       = "station",
 		.mode           = 0555,
 		.child          = llc_station_table,
 	},
-	{ 0 },
+	{ },
 };
 
 static struct ctl_path llc_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "llc", .ctl_name = NET_LLC, },
+	{ .procname = "net", },
+	{ .procname = "llc", },
 	{ }
 };
 
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 4d5543a..a10d508 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -194,6 +194,19 @@
 
 	  Do not select this option.
 
+config MAC80211_VERBOSE_MHWMP_DEBUG
+	bool "Verbose mesh HWMP routing debugging"
+	depends on MAC80211_DEBUG_MENU
+	depends on MAC80211_MESH
+	---help---
+	  Selecting this option causes mac80211 to print out very
+	  verbose mesh routing (HWMP) debugging messages (when mac80211
+	  is taking part in a mesh network).
+	  It should not be selected on production systems as those
+	  messages are remotely triggerable.
+
+	  Do not select this option.
+
 config MAC80211_DEBUG_COUNTERS
 	bool "Extra statistics for TX/RX debugging"
 	depends on MAC80211_DEBUG_MENU
diff --git a/net/mac80211/Makefile b/net/mac80211/Makefile
index 9f3cf71..298cfcc 100644
--- a/net/mac80211/Makefile
+++ b/net/mac80211/Makefile
@@ -2,7 +2,7 @@
 
 # mac80211 objects
 mac80211-y := \
-	main.o \
+	main.o status.o \
 	sta_info.o \
 	wep.o \
 	wpa.o \
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index bc064d7..51c7dc3 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -41,7 +41,8 @@
 	       sta->sta.addr, tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
-	if (drv_ampdu_action(local, IEEE80211_AMPDU_RX_STOP,
+	if (drv_ampdu_action(local, &sta->sdata->vif,
+			     IEEE80211_AMPDU_RX_STOP,
 			     &sta->sta, tid, NULL))
 		printk(KERN_DEBUG "HW problem - can not stop rx "
 				"aggregation for tid %d\n", tid);
@@ -85,10 +86,6 @@
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 
-	/* stop HW Rx aggregation. ampdu_action existence
-	 * already verified in session init so we add the BUG_ON */
-	BUG_ON(!local->ops->ampdu_action);
-
 	rcu_read_lock();
 
 	sta = sta_info_get(local, ra);
@@ -170,7 +167,7 @@
 	mgmt->u.action.u.addba_resp.timeout = cpu_to_le16(timeout);
 	mgmt->u.action.u.addba_resp.status = cpu_to_le16(status);
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 }
 
 void ieee80211_process_addba_request(struct ieee80211_local *local,
@@ -210,9 +207,9 @@
 	 * check if configuration can support the BA policy
 	 * and if buffer size does not exceeds max value */
 	/* XXX: check own ht delayed BA capability?? */
-	if (((ba_policy != 1)
-		&& (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA)))
-		|| (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
+	if (((ba_policy != 1) &&
+	     (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) ||
+	    (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
 		status = WLAN_STATUS_INVALID_QOS_PARAM;
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		if (net_ratelimit())
@@ -284,7 +281,8 @@
 		goto end;
 	}
 
-	ret = drv_ampdu_action(local, IEEE80211_AMPDU_RX_START,
+	ret = drv_ampdu_action(local, &sta->sdata->vif,
+			       IEEE80211_AMPDU_RX_START,
 			       &sta->sta, tid, &start_seq_num);
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "Rx A-MPDU request on tid %d result %d\n", tid, ret);
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index b09948c..5e3a7ec 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -91,7 +91,7 @@
 	mgmt->u.action.u.addba_req.start_seq_num =
 					cpu_to_le16(start_seq_num << 4);
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 }
 
 void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn)
@@ -120,16 +120,22 @@
 	bar->control = cpu_to_le16(bar_control);
 	bar->start_seq_num = cpu_to_le16(ssn);
 
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
-static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
-					   enum ieee80211_back_parties initiator)
+int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
+				    enum ieee80211_back_parties initiator)
 {
 	struct ieee80211_local *local = sta->local;
 	int ret;
 	u8 *state;
 
+#ifdef CONFIG_MAC80211_HT_DEBUG
+	printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
+	       sta->sta.addr, tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+
 	state = &sta->ampdu_mlme.tid_state_tx[tid];
 
 	if (*state == HT_AGG_STATE_OPERATIONAL)
@@ -138,12 +144,12 @@
 	*state = HT_AGG_STATE_REQ_STOP_BA_MSK |
 		(initiator << HT_AGG_STATE_INITIATOR_SHIFT);
 
-	ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_STOP,
+	ret = drv_ampdu_action(local, &sta->sdata->vif,
+			       IEEE80211_AMPDU_TX_STOP,
 			       &sta->sta, tid, NULL);
 
 	/* HW shall not deny going back to legacy */
 	if (WARN_ON(ret)) {
-		*state = HT_AGG_STATE_OPERATIONAL;
 		/*
 		 * We may have pending packets get stuck in this case...
 		 * Not bothering with a workaround for now.
@@ -173,12 +179,14 @@
 
 	/* check if the TID waits for addBA response */
 	spin_lock_bh(&sta->lock);
-	if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
+	if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK)) !=
+						HT_ADDBA_REQUESTED_MSK) {
 		spin_unlock_bh(&sta->lock);
 		*state = HT_AGG_STATE_IDLE;
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "timer expired on tid %d but we are not "
-				"expecting addBA response there", tid);
+				"(or no longer) expecting addBA response there",
+			tid);
 #endif
 		return;
 	}
@@ -196,11 +204,11 @@
 	return ieee802_1d_to_ac[tid & 7];
 }
 
-int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct sta_info *sta;
-	struct ieee80211_sub_if_data *sdata;
+	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
 	u8 *state;
 	int ret = 0;
 	u16 start_seq_num;
@@ -208,52 +216,37 @@
 	if (WARN_ON(!local->ops->ampdu_action))
 		return -EINVAL;
 
-	if ((tid >= STA_TID_NUM) || !(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
+	if ((tid >= STA_TID_NUM) ||
+	    !(local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION))
 		return -EINVAL;
 
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "Open BA session requested for %pM tid %u\n",
-	       ra, tid);
+	       pubsta->addr, tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
 
-	rcu_read_lock();
-
-	sta = sta_info_get(local, ra);
-	if (!sta) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
-		printk(KERN_DEBUG "Could not find the station\n");
-#endif
-		ret = -ENOENT;
-		goto unlock;
-	}
-
 	/*
 	 * The aggregation code is not prepared to handle
 	 * anything but STA/AP due to the BSSID handling.
 	 * IBSS could work in the code but isn't supported
 	 * by drivers or the standard.
 	 */
-	if (sta->sdata->vif.type != NL80211_IFTYPE_STATION &&
-	    sta->sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
-	    sta->sdata->vif.type != NL80211_IFTYPE_AP) {
-		ret = -EINVAL;
-		goto unlock;
-	}
+	if (sdata->vif.type != NL80211_IFTYPE_STATION &&
+	    sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
+	    sdata->vif.type != NL80211_IFTYPE_AP)
+		return -EINVAL;
 
 	if (test_sta_flags(sta, WLAN_STA_SUSPEND)) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "Suspend in progress. "
 		       "Denying BA session request\n");
 #endif
-		ret = -EINVAL;
-		goto unlock;
+		return -EINVAL;
 	}
 
 	spin_lock_bh(&sta->lock);
 	spin_lock(&local->ampdu_lock);
 
-	sdata = sta->sdata;
-
 	/* we have tried too many times, receiver does not want A-MPDU */
 	if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
 		ret = -EBUSY;
@@ -310,8 +303,9 @@
 
 	start_seq_num = sta->tid_seq[tid];
 
-	ret = drv_ampdu_action(local, IEEE80211_AMPDU_TX_START,
-			       &sta->sta, tid, &start_seq_num);
+	ret = drv_ampdu_action(local, &sdata->vif,
+			       IEEE80211_AMPDU_TX_START,
+			       pubsta, tid, &start_seq_num);
 
 	if (ret) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
@@ -336,7 +330,7 @@
 			sta->ampdu_mlme.dialog_token_allocator;
 	sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
 
-	ieee80211_send_addba_request(sta->sdata, ra, tid,
+	ieee80211_send_addba_request(sdata, pubsta->addr, tid,
 			 sta->ampdu_mlme.tid_tx[tid]->dialog_token,
 			 sta->ampdu_mlme.tid_tx[tid]->ssn,
 			 0x40, 5000);
@@ -348,7 +342,7 @@
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
 #endif
-	goto unlock;
+	return 0;
 
  err_free:
 	kfree(sta->ampdu_mlme.tid_tx[tid]);
@@ -360,8 +354,6 @@
  err_unlock_sta:
 	spin_unlock(&local->ampdu_lock);
 	spin_unlock_bh(&sta->lock);
- unlock:
-	rcu_read_unlock();
 	return ret;
 }
 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
@@ -428,13 +420,15 @@
 	ieee80211_agg_splice_finish(local, sta, tid);
 	spin_unlock(&local->ampdu_lock);
 
-	drv_ampdu_action(local, IEEE80211_AMPDU_TX_OPERATIONAL,
+	drv_ampdu_action(local, &sta->sdata->vif,
+			 IEEE80211_AMPDU_TX_OPERATIONAL,
 			 &sta->sta, tid, NULL);
 }
 
-void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
+void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	u8 *state;
 
@@ -483,10 +477,11 @@
 }
 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb);
 
-void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
 				      const u8 *ra, u16 tid)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_ra_tid *ra_tid;
 	struct sk_buff *skb = dev_alloc_skb(0);
 
@@ -501,6 +496,7 @@
 	ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
 	memcpy(&ra_tid->ra, ra, ETH_ALEN);
 	ra_tid->tid = tid;
+	ra_tid->vif = vif;
 
 	skb->pkt_type = IEEE80211_ADDBA_MSG;
 	skb_queue_tail(&local->skb_queue, skb);
@@ -523,11 +519,6 @@
 		goto unlock;
 	}
 
-#ifdef CONFIG_MAC80211_HT_DEBUG
-	printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
-	       sta->sta.addr, tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
-
 	ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator);
 
  unlock:
@@ -535,36 +526,27 @@
 	return ret;
 }
 
-int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
-				 u8 *ra, u16 tid,
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
 				 enum ieee80211_back_parties initiator)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct sta_info *sta;
-	int ret = 0;
+	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
 
-	if (WARN_ON(!local->ops->ampdu_action))
+	if (!local->ops->ampdu_action)
 		return -EINVAL;
 
 	if (tid >= STA_TID_NUM)
 		return -EINVAL;
 
-	rcu_read_lock();
-	sta = sta_info_get(local, ra);
-	if (!sta) {
-		rcu_read_unlock();
-		return -ENOENT;
-	}
-
-	ret = __ieee80211_stop_tx_ba_session(sta, tid, initiator);
-	rcu_read_unlock();
-	return ret;
+	return __ieee80211_stop_tx_ba_session(sta, tid, initiator);
 }
 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
 
-void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
+void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	u8 *state;
 
@@ -627,10 +609,11 @@
 }
 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb);
 
-void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif,
 				     const u8 *ra, u16 tid)
 {
-	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_ra_tid *ra_tid;
 	struct sk_buff *skb = dev_alloc_skb(0);
 
@@ -645,6 +628,7 @@
 	ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
 	memcpy(&ra_tid->ra, ra, ETH_ALEN);
 	ra_tid->tid = tid;
+	ra_tid->vif = vif;
 
 	skb->pkt_type = IEEE80211_DELBA_MSG;
 	skb_queue_tail(&local->skb_queue, skb);
@@ -666,21 +650,21 @@
 
 	state = &sta->ampdu_mlme.tid_state_tx[tid];
 
-	del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
-
 	spin_lock_bh(&sta->lock);
 
 	if (!(*state & HT_ADDBA_REQUESTED_MSK))
-		goto timer_still_needed;
+		goto out;
 
 	if (mgmt->u.action.u.addba_resp.dialog_token !=
 		sta->ampdu_mlme.tid_tx[tid]->dialog_token) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
-		goto timer_still_needed;
+		goto out;
 	}
 
+	del_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
+
 #ifdef CONFIG_MAC80211_HT_DEBUG
 	printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid);
 #endif /* CONFIG_MAC80211_HT_DEBUG */
@@ -699,10 +683,6 @@
 		___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
 	}
 
-	goto out;
-
- timer_still_needed:
-	add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
  out:
 	spin_unlock_bh(&sta->lock);
 }
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7b5131b..93ee1fd 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -36,6 +36,15 @@
 	}
 }
 
+static bool nl80211_params_check(enum nl80211_iftype type,
+				 struct vif_params *params)
+{
+	if (!nl80211_type_check(type))
+		return false;
+
+	return true;
+}
+
 static int ieee80211_add_iface(struct wiphy *wiphy, char *name,
 			       enum nl80211_iftype type, u32 *flags,
 			       struct vif_params *params)
@@ -45,7 +54,7 @@
 	struct ieee80211_sub_if_data *sdata;
 	int err;
 
-	if (!nl80211_type_check(type))
+	if (!nl80211_params_check(type, params))
 		return -EINVAL;
 
 	err = ieee80211_if_add(local, name, &dev, type, params);
@@ -75,7 +84,7 @@
 	if (netif_running(dev))
 		return -EBUSY;
 
-	if (!nl80211_type_check(type))
+	if (!nl80211_params_check(type, params))
 		return -EINVAL;
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
@@ -92,6 +101,13 @@
 	if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags)
 		return 0;
 
+	if (type == NL80211_IFTYPE_AP_VLAN &&
+	    params && params->use_4addr == 0)
+		rcu_assign_pointer(sdata->u.vlan.sta, NULL);
+	else if (type == NL80211_IFTYPE_STATION &&
+		 params && params->use_4addr >= 0)
+		sdata->u.mgd.use_4addr = params->use_4addr;
+
 	sdata->u.mntr_flags = *flags;
 	return 0;
 }
@@ -377,13 +393,13 @@
 static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
 				 int idx, u8 *mac, struct station_info *sinfo)
 {
-	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct sta_info *sta;
 	int ret = -ENOENT;
 
 	rcu_read_lock();
 
-	sta = sta_info_get_by_idx(local, idx, dev);
+	sta = sta_info_get_by_idx(sdata, idx);
 	if (sta) {
 		ret = 0;
 		memcpy(mac, sta->sta.addr, ETH_ALEN);
@@ -738,13 +754,6 @@
 
 	err = sta_info_insert(sta);
 	if (err) {
-		/* STA has been freed */
-		if (err == -EEXIST && layer2_update) {
-			/* Need to update layer 2 devices on reassociation */
-			sta = sta_info_get(local, mac);
-			if (sta)
-				ieee80211_send_layer2_update(sta);
-		}
 		rcu_read_unlock();
 		return err;
 	}
@@ -813,6 +822,15 @@
 			return -EINVAL;
 		}
 
+		if (params->vlan->ieee80211_ptr->use_4addr) {
+			if (vlansdata->u.vlan.sta) {
+				rcu_read_unlock();
+				return -EBUSY;
+			}
+
+			rcu_assign_pointer(vlansdata->u.vlan.sta, sta);
+		}
+
 		sta->sdata = vlansdata;
 		ieee80211_send_layer2_update(sta);
 	}
@@ -914,7 +932,7 @@
 	pinfo->generation = mesh_paths_generation;
 
 	pinfo->filled = MPATH_INFO_FRAME_QLEN |
-			MPATH_INFO_DSN |
+			MPATH_INFO_SN |
 			MPATH_INFO_METRIC |
 			MPATH_INFO_EXPTIME |
 			MPATH_INFO_DISCOVERY_TIMEOUT |
@@ -922,7 +940,7 @@
 			MPATH_INFO_FLAGS;
 
 	pinfo->frame_qlen = mpath->frame_queue.qlen;
-	pinfo->dsn = mpath->dsn;
+	pinfo->sn = mpath->sn;
 	pinfo->metric = mpath->metric;
 	if (time_before(jiffies, mpath->exp_time))
 		pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
@@ -934,8 +952,8 @@
 		pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
 	if (mpath->flags & MESH_PATH_RESOLVING)
 		pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
-	if (mpath->flags & MESH_PATH_DSN_VALID)
-		pinfo->flags |= NL80211_MPATH_FLAG_DSN_VALID;
+	if (mpath->flags & MESH_PATH_SN_VALID)
+		pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
 	if (mpath->flags & MESH_PATH_FIXED)
 		pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
 	if (mpath->flags & MESH_PATH_RESOLVING)
@@ -1008,7 +1026,10 @@
 {
 	struct mesh_config *conf;
 	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_if_mesh *ifmsh;
+
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	ifmsh = &sdata->u.mesh;
 
 	/* Set the config options which we are interested in setting */
 	conf = &(sdata->u.mesh.mshcfg);
@@ -1043,6 +1064,10 @@
 			   mask))
 		conf->dot11MeshHWMPnetDiameterTraversalTime =
 			nconf->dot11MeshHWMPnetDiameterTraversalTime;
+	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) {
+		conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode;
+		ieee80211_mesh_root_setup(ifmsh);
+	}
 	return 0;
 }
 
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 96991b6..e4b5409 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -1,3 +1,4 @@
+
 /*
  * mac80211 debugfs for wireless PHYs
  *
@@ -38,16 +39,10 @@
 };
 
 #define DEBUGFS_ADD(name)						\
-	local->debugfs.name = debugfs_create_file(#name, 0400, phyd,	\
-						  local, &name## _ops);
+	debugfs_create_file(#name, 0400, phyd, local, &name## _ops);
 
 #define DEBUGFS_ADD_MODE(name, mode)					\
-	local->debugfs.name = debugfs_create_file(#name, mode, phyd,	\
-						  local, &name## _ops);
-
-#define DEBUGFS_DEL(name)						\
-	debugfs_remove(local->debugfs.name);				\
-	local->debugfs.name = NULL;
+	debugfs_create_file(#name, mode, phyd, local, &name## _ops);
 
 
 DEBUGFS_READONLY_FILE(frequency, 20, "%d",
@@ -57,7 +52,7 @@
 DEBUGFS_READONLY_FILE(wep_iv, 20, "%#08x",
 		      local->wep_iv & 0xffffff);
 DEBUGFS_READONLY_FILE(rate_ctrl_alg, 100, "%s",
-		      local->rate_ctrl ? local->rate_ctrl->ops->name : "<unset>");
+	local->rate_ctrl ? local->rate_ctrl->ops->name : "hw/driver");
 
 static ssize_t tsf_read(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
@@ -233,12 +228,7 @@
 };
 
 #define DEBUGFS_STATS_ADD(name)						\
-	local->debugfs.stats.name = debugfs_create_file(#name, 0400, statsd,\
-		local, &stats_ ##name## _ops);
-
-#define DEBUGFS_STATS_DEL(name)						\
-	debugfs_remove(local->debugfs.stats.name);			\
-	local->debugfs.stats.name = NULL;
+	debugfs_create_file(#name, 0400, statsd, local, &stats_ ##name## _ops);
 
 DEBUGFS_STATS_FILE(transmitted_fragment_count, 20, "%u",
 		   local->dot11TransmittedFragmentCount);
@@ -326,7 +316,6 @@
 	DEBUGFS_ADD(noack);
 
 	statsd = debugfs_create_dir("statistics", phyd);
-	local->debugfs.statistics = statsd;
 
 	/* if the dir failed, don't put all the other things into the root! */
 	if (!statsd)
@@ -367,57 +356,3 @@
 	DEBUGFS_STATS_ADD(dot11FCSErrorCount);
 	DEBUGFS_STATS_ADD(dot11RTSSuccessCount);
 }
-
-void debugfs_hw_del(struct ieee80211_local *local)
-{
-	DEBUGFS_DEL(frequency);
-	DEBUGFS_DEL(total_ps_buffered);
-	DEBUGFS_DEL(wep_iv);
-	DEBUGFS_DEL(tsf);
-	DEBUGFS_DEL(queues);
-	DEBUGFS_DEL(reset);
-	DEBUGFS_DEL(noack);
-
-	DEBUGFS_STATS_DEL(transmitted_fragment_count);
-	DEBUGFS_STATS_DEL(multicast_transmitted_frame_count);
-	DEBUGFS_STATS_DEL(failed_count);
-	DEBUGFS_STATS_DEL(retry_count);
-	DEBUGFS_STATS_DEL(multiple_retry_count);
-	DEBUGFS_STATS_DEL(frame_duplicate_count);
-	DEBUGFS_STATS_DEL(received_fragment_count);
-	DEBUGFS_STATS_DEL(multicast_received_frame_count);
-	DEBUGFS_STATS_DEL(transmitted_frame_count);
-	DEBUGFS_STATS_DEL(num_scans);
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
-	DEBUGFS_STATS_DEL(tx_handlers_drop);
-	DEBUGFS_STATS_DEL(tx_handlers_queued);
-	DEBUGFS_STATS_DEL(tx_handlers_drop_unencrypted);
-	DEBUGFS_STATS_DEL(tx_handlers_drop_fragment);
-	DEBUGFS_STATS_DEL(tx_handlers_drop_wep);
-	DEBUGFS_STATS_DEL(tx_handlers_drop_not_assoc);
-	DEBUGFS_STATS_DEL(tx_handlers_drop_unauth_port);
-	DEBUGFS_STATS_DEL(rx_handlers_drop);
-	DEBUGFS_STATS_DEL(rx_handlers_queued);
-	DEBUGFS_STATS_DEL(rx_handlers_drop_nullfunc);
-	DEBUGFS_STATS_DEL(rx_handlers_drop_defrag);
-	DEBUGFS_STATS_DEL(rx_handlers_drop_short);
-	DEBUGFS_STATS_DEL(rx_handlers_drop_passive_scan);
-	DEBUGFS_STATS_DEL(tx_expand_skb_head);
-	DEBUGFS_STATS_DEL(tx_expand_skb_head_cloned);
-	DEBUGFS_STATS_DEL(rx_expand_skb_head);
-	DEBUGFS_STATS_DEL(rx_expand_skb_head2);
-	DEBUGFS_STATS_DEL(rx_handlers_fragments);
-	DEBUGFS_STATS_DEL(tx_status_drop);
-#endif
-	DEBUGFS_STATS_DEL(dot11ACKFailureCount);
-	DEBUGFS_STATS_DEL(dot11RTSFailureCount);
-	DEBUGFS_STATS_DEL(dot11FCSErrorCount);
-	DEBUGFS_STATS_DEL(dot11RTSSuccessCount);
-
-	debugfs_remove(local->debugfs.statistics);
-	local->debugfs.statistics = NULL;
-	debugfs_remove(local->debugfs.stations);
-	local->debugfs.stations = NULL;
-	debugfs_remove(local->debugfs.keys);
-	local->debugfs.keys = NULL;
-}
diff --git a/net/mac80211/debugfs.h b/net/mac80211/debugfs.h
index dd25419..68e6a20 100644
--- a/net/mac80211/debugfs.h
+++ b/net/mac80211/debugfs.h
@@ -3,14 +3,12 @@
 
 #ifdef CONFIG_MAC80211_DEBUGFS
 extern void debugfs_hw_add(struct ieee80211_local *local);
-extern void debugfs_hw_del(struct ieee80211_local *local);
 extern int mac80211_open_file_generic(struct inode *inode, struct file *file);
 #else
 static inline void debugfs_hw_add(struct ieee80211_local *local)
 {
 	return;
 }
-static inline void debugfs_hw_del(struct ieee80211_local *local) {}
 #endif
 
 #endif /* __MAC80211_DEBUGFS_H */
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 99c7525..e0f5224 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -225,8 +225,8 @@
 KEY_OPS(key);
 
 #define DEBUGFS_ADD(name) \
-	key->debugfs.name = debugfs_create_file(#name, 0400,\
-				key->debugfs.dir, key, &key_##name##_ops);
+	debugfs_create_file(#name, 0400, key->debugfs.dir, \
+			    key, &key_##name##_ops);
 
 void ieee80211_debugfs_key_add(struct ieee80211_key *key)
   {
@@ -271,30 +271,12 @@
 	DEBUGFS_ADD(ifindex);
 };
 
-#define DEBUGFS_DEL(name) \
-	debugfs_remove(key->debugfs.name); key->debugfs.name = NULL;
-
 void ieee80211_debugfs_key_remove(struct ieee80211_key *key)
 {
 	if (!key)
 		return;
 
-	DEBUGFS_DEL(keylen);
-	DEBUGFS_DEL(flags);
-	DEBUGFS_DEL(keyidx);
-	DEBUGFS_DEL(hw_key_idx);
-	DEBUGFS_DEL(tx_rx_count);
-	DEBUGFS_DEL(algorithm);
-	DEBUGFS_DEL(tx_spec);
-	DEBUGFS_DEL(rx_spec);
-	DEBUGFS_DEL(replays);
-	DEBUGFS_DEL(icverrors);
-	DEBUGFS_DEL(key);
-	DEBUGFS_DEL(ifindex);
-
-	debugfs_remove(key->debugfs.stalink);
-	key->debugfs.stalink = NULL;
-	debugfs_remove(key->debugfs.dir);
+	debugfs_remove_recursive(key->debugfs.dir);
 	key->debugfs.dir = NULL;
 }
 void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
@@ -302,7 +284,7 @@
 	char buf[50];
 	struct ieee80211_key *key;
 
-	if (!sdata->debugfsdir)
+	if (!sdata->debugfs.dir)
 		return;
 
 	/* this is running under the key lock */
@@ -310,9 +292,9 @@
 	key = sdata->default_key;
 	if (key) {
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
-		sdata->common_debugfs.default_key =
+		sdata->debugfs.default_key =
 			debugfs_create_symlink("default_key",
-					       sdata->debugfsdir, buf);
+					       sdata->debugfs.dir, buf);
 	} else
 		ieee80211_debugfs_key_remove_default(sdata);
 }
@@ -322,8 +304,8 @@
 	if (!sdata)
 		return;
 
-	debugfs_remove(sdata->common_debugfs.default_key);
-	sdata->common_debugfs.default_key = NULL;
+	debugfs_remove(sdata->debugfs.default_key);
+	sdata->debugfs.default_key = NULL;
 }
 
 void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata)
@@ -331,7 +313,7 @@
 	char buf[50];
 	struct ieee80211_key *key;
 
-	if (!sdata->debugfsdir)
+	if (!sdata->debugfs.dir)
 		return;
 
 	/* this is running under the key lock */
@@ -339,9 +321,9 @@
 	key = sdata->default_mgmt_key;
 	if (key) {
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
-		sdata->common_debugfs.default_mgmt_key =
+		sdata->debugfs.default_mgmt_key =
 			debugfs_create_symlink("default_mgmt_key",
-					       sdata->debugfsdir, buf);
+					       sdata->debugfs.dir, buf);
 	} else
 		ieee80211_debugfs_key_remove_mgmt_default(sdata);
 }
@@ -351,8 +333,8 @@
 	if (!sdata)
 		return;
 
-	debugfs_remove(sdata->common_debugfs.default_mgmt_key);
-	sdata->common_debugfs.default_mgmt_key = NULL;
+	debugfs_remove(sdata->debugfs.default_mgmt_key);
+	sdata->debugfs.default_mgmt_key = NULL;
 }
 
 void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 61234e7..472b203 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -149,12 +149,14 @@
 		u.mesh.mshcfg.path_refresh_time, DEC);
 IEEE80211_IF_FILE(min_discovery_timeout,
 		u.mesh.mshcfg.min_discovery_timeout, DEC);
+IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
+		u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
 #endif
 
 
-#define DEBUGFS_ADD(name, type)\
-	sdata->debugfs.type.name = debugfs_create_file(#name, 0400,\
-		sdata->debugfsdir, sdata, &name##_ops);
+#define DEBUGFS_ADD(name, type) \
+	debugfs_create_file(#name, 0400, sdata->debugfs.dir, \
+			    sdata, &name##_ops);
 
 static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 {
@@ -199,30 +201,32 @@
 }
 
 #ifdef CONFIG_MAC80211_MESH
-#define MESHSTATS_ADD(name)\
-	sdata->mesh_stats.name = debugfs_create_file(#name, 0400,\
-		sdata->mesh_stats_dir, sdata, &name##_ops);
 
 static void add_mesh_stats(struct ieee80211_sub_if_data *sdata)
 {
-	sdata->mesh_stats_dir = debugfs_create_dir("mesh_stats",
-				sdata->debugfsdir);
+	struct dentry *dir = debugfs_create_dir("mesh_stats",
+						sdata->debugfs.dir);
+
+#define MESHSTATS_ADD(name)\
+	debugfs_create_file(#name, 0400, dir, sdata, &name##_ops);
+
 	MESHSTATS_ADD(fwded_mcast);
 	MESHSTATS_ADD(fwded_unicast);
 	MESHSTATS_ADD(fwded_frames);
 	MESHSTATS_ADD(dropped_frames_ttl);
 	MESHSTATS_ADD(dropped_frames_no_route);
 	MESHSTATS_ADD(estab_plinks);
+#undef MESHSTATS_ADD
 }
 
-#define MESHPARAMS_ADD(name)\
-	sdata->mesh_config.name = debugfs_create_file(#name, 0600,\
-		sdata->mesh_config_dir, sdata, &name##_ops);
-
 static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
 {
-	sdata->mesh_config_dir = debugfs_create_dir("mesh_config",
-				sdata->debugfsdir);
+	struct dentry *dir = debugfs_create_dir("mesh_config",
+						sdata->debugfs.dir);
+
+#define MESHPARAMS_ADD(name) \
+	debugfs_create_file(#name, 0600, dir, sdata, &name##_ops);
+
 	MESHPARAMS_ADD(dot11MeshMaxRetries);
 	MESHPARAMS_ADD(dot11MeshRetryTimeout);
 	MESHPARAMS_ADD(dot11MeshConfirmTimeout);
@@ -236,12 +240,14 @@
 	MESHPARAMS_ADD(dot11MeshHWMPmaxPREQretries);
 	MESHPARAMS_ADD(path_refresh_time);
 	MESHPARAMS_ADD(min_discovery_timeout);
+
+#undef MESHPARAMS_ADD
 }
 #endif
 
 static void add_files(struct ieee80211_sub_if_data *sdata)
 {
-	if (!sdata->debugfsdir)
+	if (!sdata->debugfs.dir)
 		return;
 
 	switch (sdata->vif.type) {
@@ -274,134 +280,6 @@
 	}
 }
 
-#define DEBUGFS_DEL(name, type)					\
-	do {							\
-		debugfs_remove(sdata->debugfs.type.name);	\
-		sdata->debugfs.type.name = NULL;		\
-	} while (0)
-
-static void del_sta_files(struct ieee80211_sub_if_data *sdata)
-{
-	DEBUGFS_DEL(drop_unencrypted, sta);
-	DEBUGFS_DEL(force_unicast_rateidx, sta);
-	DEBUGFS_DEL(max_ratectrl_rateidx, sta);
-
-	DEBUGFS_DEL(bssid, sta);
-	DEBUGFS_DEL(aid, sta);
-	DEBUGFS_DEL(capab, sta);
-}
-
-static void del_ap_files(struct ieee80211_sub_if_data *sdata)
-{
-	DEBUGFS_DEL(drop_unencrypted, ap);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
-
-	DEBUGFS_DEL(num_sta_ps, ap);
-	DEBUGFS_DEL(dtim_count, ap);
-	DEBUGFS_DEL(num_buffered_multicast, ap);
-}
-
-static void del_wds_files(struct ieee80211_sub_if_data *sdata)
-{
-	DEBUGFS_DEL(drop_unencrypted, wds);
-	DEBUGFS_DEL(force_unicast_rateidx, wds);
-	DEBUGFS_DEL(max_ratectrl_rateidx, wds);
-
-	DEBUGFS_DEL(peer, wds);
-}
-
-static void del_vlan_files(struct ieee80211_sub_if_data *sdata)
-{
-	DEBUGFS_DEL(drop_unencrypted, vlan);
-	DEBUGFS_DEL(force_unicast_rateidx, vlan);
-	DEBUGFS_DEL(max_ratectrl_rateidx, vlan);
-}
-
-static void del_monitor_files(struct ieee80211_sub_if_data *sdata)
-{
-}
-
-#ifdef CONFIG_MAC80211_MESH
-#define MESHSTATS_DEL(name)			\
-	do {						\
-		debugfs_remove(sdata->mesh_stats.name);	\
-		sdata->mesh_stats.name = NULL;		\
-	} while (0)
-
-static void del_mesh_stats(struct ieee80211_sub_if_data *sdata)
-{
-	MESHSTATS_DEL(fwded_mcast);
-	MESHSTATS_DEL(fwded_unicast);
-	MESHSTATS_DEL(fwded_frames);
-	MESHSTATS_DEL(dropped_frames_ttl);
-	MESHSTATS_DEL(dropped_frames_no_route);
-	MESHSTATS_DEL(estab_plinks);
-	debugfs_remove(sdata->mesh_stats_dir);
-	sdata->mesh_stats_dir = NULL;
-}
-
-#define MESHPARAMS_DEL(name)			\
-	do {						\
-		debugfs_remove(sdata->mesh_config.name);	\
-		sdata->mesh_config.name = NULL;		\
-	} while (0)
-
-static void del_mesh_config(struct ieee80211_sub_if_data *sdata)
-{
-	MESHPARAMS_DEL(dot11MeshMaxRetries);
-	MESHPARAMS_DEL(dot11MeshRetryTimeout);
-	MESHPARAMS_DEL(dot11MeshConfirmTimeout);
-	MESHPARAMS_DEL(dot11MeshHoldingTimeout);
-	MESHPARAMS_DEL(dot11MeshTTL);
-	MESHPARAMS_DEL(auto_open_plinks);
-	MESHPARAMS_DEL(dot11MeshMaxPeerLinks);
-	MESHPARAMS_DEL(dot11MeshHWMPactivePathTimeout);
-	MESHPARAMS_DEL(dot11MeshHWMPpreqMinInterval);
-	MESHPARAMS_DEL(dot11MeshHWMPnetDiameterTraversalTime);
-	MESHPARAMS_DEL(dot11MeshHWMPmaxPREQretries);
-	MESHPARAMS_DEL(path_refresh_time);
-	MESHPARAMS_DEL(min_discovery_timeout);
-	debugfs_remove(sdata->mesh_config_dir);
-	sdata->mesh_config_dir = NULL;
-}
-#endif
-
-static void del_files(struct ieee80211_sub_if_data *sdata)
-{
-	if (!sdata->debugfsdir)
-		return;
-
-	switch (sdata->vif.type) {
-	case NL80211_IFTYPE_MESH_POINT:
-#ifdef CONFIG_MAC80211_MESH
-		del_mesh_stats(sdata);
-		del_mesh_config(sdata);
-#endif
-		break;
-	case NL80211_IFTYPE_STATION:
-		del_sta_files(sdata);
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		/* XXX */
-		break;
-	case NL80211_IFTYPE_AP:
-		del_ap_files(sdata);
-		break;
-	case NL80211_IFTYPE_WDS:
-		del_wds_files(sdata);
-		break;
-	case NL80211_IFTYPE_MONITOR:
-		del_monitor_files(sdata);
-		break;
-	case NL80211_IFTYPE_AP_VLAN:
-		del_vlan_files(sdata);
-		break;
-	default:
-		break;
-	}
-}
-
 static int notif_registered;
 
 void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata)
@@ -412,16 +290,18 @@
 		return;
 
 	sprintf(buf, "netdev:%s", sdata->dev->name);
-	sdata->debugfsdir = debugfs_create_dir(buf,
+	sdata->debugfs.dir = debugfs_create_dir(buf,
 		sdata->local->hw.wiphy->debugfsdir);
 	add_files(sdata);
 }
 
 void ieee80211_debugfs_remove_netdev(struct ieee80211_sub_if_data *sdata)
 {
-	del_files(sdata);
-	debugfs_remove(sdata->debugfsdir);
-	sdata->debugfsdir = NULL;
+	if (!sdata->debugfs.dir)
+		return;
+
+	debugfs_remove_recursive(sdata->debugfs.dir);
+	sdata->debugfs.dir = NULL;
 }
 
 static int netdev_notify(struct notifier_block *nb,
@@ -444,7 +324,7 @@
 
 	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	dir = sdata->debugfsdir;
+	dir = sdata->debugfs.dir;
 
 	if (!dir)
 		return 0;
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 33a2e89..3f41608 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -57,7 +57,6 @@
 STA_FILE(tx_retry_failed, tx_retry_failed, LU);
 STA_FILE(tx_retry_count, tx_retry_count, LU);
 STA_FILE(last_signal, last_signal, D);
-STA_FILE(last_qual, last_qual, D);
 STA_FILE(last_noise, last_noise, D);
 STA_FILE(wep_weak_iv_count, wep_weak_iv_count, LU);
 
@@ -67,10 +66,11 @@
 	char buf[100];
 	struct sta_info *sta = file->private_data;
 	u32 staflags = get_sta_flags(sta);
-	int res = scnprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s",
+	int res = scnprintf(buf, sizeof(buf), "%s%s%s%s%s%s%s%s%s",
 		staflags & WLAN_STA_AUTH ? "AUTH\n" : "",
 		staflags & WLAN_STA_ASSOC ? "ASSOC\n" : "",
-		staflags & WLAN_STA_PS ? "PS\n" : "",
+		staflags & WLAN_STA_PS_STA ? "PS (sta)\n" : "",
+		staflags & WLAN_STA_PS_DRIVER ? "PS (driver)\n" : "",
 		staflags & WLAN_STA_AUTHORIZED ? "AUTHORIZED\n" : "",
 		staflags & WLAN_STA_SHORT_PREAMBLE ? "SHORT PREAMBLE\n" : "",
 		staflags & WLAN_STA_WME ? "WME\n" : "",
@@ -157,13 +157,37 @@
 }
 STA_OPS(agg_status);
 
-#define DEBUGFS_ADD(name) \
-	sta->debugfs.name = debugfs_create_file(#name, 0400, \
-		sta->debugfs.dir, sta, &sta_ ##name## _ops);
+static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf,
+				size_t count, loff_t *ppos)
+{
+	char buf[200], *p = buf;
+	int i;
+	struct sta_info *sta = file->private_data;
+	struct ieee80211_sta_ht_cap *htc = &sta->sta.ht_cap;
 
-#define DEBUGFS_DEL(name) \
-	debugfs_remove(sta->debugfs.name);\
-	sta->debugfs.name = NULL;
+	p += scnprintf(p, sizeof(buf) + buf - p, "ht %ssupported\n",
+			htc->ht_supported ? "" : "not ");
+	if (htc->ht_supported) {
+		p += scnprintf(p, sizeof(buf)+buf-p, "cap: %#.2x\n", htc->cap);
+		p += scnprintf(p, sizeof(buf)+buf-p, "ampdu factor/density: %d/%d\n",
+				htc->ampdu_factor, htc->ampdu_density);
+		p += scnprintf(p, sizeof(buf)+buf-p, "MCS mask:");
+		for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+			p += scnprintf(p, sizeof(buf)+buf-p, " %.2x",
+					htc->mcs.rx_mask[i]);
+		p += scnprintf(p, sizeof(buf)+buf-p, "\nMCS rx highest: %d\n",
+				le16_to_cpu(htc->mcs.rx_highest));
+		p += scnprintf(p, sizeof(buf)+buf-p, "MCS tx params: %x\n",
+				htc->mcs.tx_params);
+	}
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
+}
+STA_OPS(ht_capa);
+
+#define DEBUGFS_ADD(name) \
+	debugfs_create_file(#name, 0400, \
+		sta->debugfs.dir, sta, &sta_ ##name## _ops);
 
 
 void ieee80211_sta_debugfs_add(struct sta_info *sta)
@@ -209,36 +233,13 @@
 	DEBUGFS_ADD(tx_retry_failed);
 	DEBUGFS_ADD(tx_retry_count);
 	DEBUGFS_ADD(last_signal);
-	DEBUGFS_ADD(last_qual);
 	DEBUGFS_ADD(last_noise);
 	DEBUGFS_ADD(wep_weak_iv_count);
+	DEBUGFS_ADD(ht_capa);
 }
 
 void ieee80211_sta_debugfs_remove(struct sta_info *sta)
 {
-	DEBUGFS_DEL(flags);
-	DEBUGFS_DEL(num_ps_buf_frames);
-	DEBUGFS_DEL(inactive_ms);
-	DEBUGFS_DEL(last_seq_ctrl);
-	DEBUGFS_DEL(agg_status);
-	DEBUGFS_DEL(aid);
-	DEBUGFS_DEL(dev);
-	DEBUGFS_DEL(rx_packets);
-	DEBUGFS_DEL(tx_packets);
-	DEBUGFS_DEL(rx_bytes);
-	DEBUGFS_DEL(tx_bytes);
-	DEBUGFS_DEL(rx_duplicates);
-	DEBUGFS_DEL(rx_fragments);
-	DEBUGFS_DEL(rx_dropped);
-	DEBUGFS_DEL(tx_fragments);
-	DEBUGFS_DEL(tx_filtered);
-	DEBUGFS_DEL(tx_retry_failed);
-	DEBUGFS_DEL(tx_retry_count);
-	DEBUGFS_DEL(last_signal);
-	DEBUGFS_DEL(last_qual);
-	DEBUGFS_DEL(last_noise);
-	DEBUGFS_DEL(wep_weak_iv_count);
-
-	debugfs_remove(sta->debugfs.dir);
+	debugfs_remove_recursive(sta->debugfs.dir);
 	sta->debugfs.dir = NULL;
 }
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 020a94a..921dd9c 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -239,15 +239,16 @@
 }
 
 static inline int drv_ampdu_action(struct ieee80211_local *local,
+				   struct ieee80211_vif *vif,
 				   enum ieee80211_ampdu_mlme_action action,
 				   struct ieee80211_sta *sta, u16 tid,
 				   u16 *ssn)
 {
 	int ret = -EOPNOTSUPP;
 	if (local->ops->ampdu_action)
-		ret = local->ops->ampdu_action(&local->hw, action,
+		ret = local->ops->ampdu_action(&local->hw, vif, action,
 					       sta, tid, ssn);
-	trace_drv_ampdu_action(local, action, sta, tid, ssn, ret);
+	trace_drv_ampdu_action(local, vif, action, sta, tid, ssn, ret);
 	return ret;
 }
 
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 37b9051..ee94ea0 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -131,17 +131,35 @@
 		LOCAL_ENTRY
 		__field(u32, changed)
 		__field(int, ret)
+		__field(u32, flags)
+		__field(int, power_level)
+		__field(int, dynamic_ps_timeout)
+		__field(int, max_sleep_period)
+		__field(u16, listen_interval)
+		__field(u8, long_frame_max_tx_count)
+		__field(u8, short_frame_max_tx_count)
+		__field(int, center_freq)
+		__field(int, channel_type)
 	),
 
 	TP_fast_assign(
 		LOCAL_ASSIGN;
 		__entry->changed = changed;
 		__entry->ret = ret;
+		__entry->flags = local->hw.conf.flags;
+		__entry->power_level = local->hw.conf.power_level;
+		__entry->dynamic_ps_timeout = local->hw.conf.dynamic_ps_timeout;
+		__entry->max_sleep_period = local->hw.conf.max_sleep_period;
+		__entry->listen_interval = local->hw.conf.listen_interval;
+		__entry->long_frame_max_tx_count = local->hw.conf.long_frame_max_tx_count;
+		__entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count;
+		__entry->center_freq = local->hw.conf.channel->center_freq;
+		__entry->channel_type = local->hw.conf.channel_type;
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT " ch:%#x ret:%d",
-		LOCAL_PR_ARG, __entry->changed, __entry->ret
+		LOCAL_PR_FMT " ch:%#x freq:%d ret:%d",
+		LOCAL_PR_ARG, __entry->changed, __entry->center_freq, __entry->ret
 	)
 );
 
@@ -167,6 +185,8 @@
 		__field(u64, timestamp)
 		__field(u32, basic_rates)
 		__field(u32, changed)
+		__field(bool, enable_beacon)
+		__field(u16, ht_operation_mode)
 	),
 
 	TP_fast_assign(
@@ -183,6 +203,8 @@
 		__entry->assoc_cap = info->assoc_capability;
 		__entry->timestamp = info->timestamp;
 		__entry->basic_rates = info->basic_rates;
+		__entry->enable_beacon = info->enable_beacon;
+		__entry->ht_operation_mode = info->ht_operation_mode;
 	),
 
 	TP_printk(
@@ -634,11 +656,12 @@
 
 TRACE_EVENT(drv_ampdu_action,
 	TP_PROTO(struct ieee80211_local *local,
+		 struct ieee80211_vif *vif,
 		 enum ieee80211_ampdu_mlme_action action,
 		 struct ieee80211_sta *sta, u16 tid,
 		 u16 *ssn, int ret),
 
-	TP_ARGS(local, action, sta, tid, ssn, ret),
+	TP_ARGS(local, vif, action, sta, tid, ssn, ret),
 
 	TP_STRUCT__entry(
 		LOCAL_ENTRY
@@ -647,10 +670,12 @@
 		__field(u16, tid)
 		__field(u16, ssn)
 		__field(int, ret)
+		VIF_ENTRY
 	),
 
 	TP_fast_assign(
 		LOCAL_ASSIGN;
+		VIF_ASSIGN;
 		STA_ASSIGN;
 		__entry->ret = ret;
 		__entry->action = action;
@@ -659,8 +684,8 @@
 	),
 
 	TP_printk(
-		LOCAL_PR_FMT  STA_PR_FMT " action:%d tid:%d ret:%d",
-		LOCAL_PR_ARG, STA_PR_ARG, __entry->action, __entry->tid, __entry->ret
+		LOCAL_PR_FMT VIF_PR_FMT STA_PR_FMT " action:%d tid:%d ret:%d",
+		LOCAL_PR_ARG, VIF_PR_ARG, STA_PR_ARG, __entry->action, __entry->tid, __entry->ret
 	)
 );
 #endif /* !__MAC80211_DRIVER_TRACE || TRACE_HEADER_MULTI_READ */
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 48ef1a2..3787455 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -134,14 +134,13 @@
 	mgmt->u.action.u.delba.params = cpu_to_le16(params);
 	mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 }
 
 void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
 			     struct sta_info *sta,
 			     struct ieee80211_mgmt *mgmt, size_t len)
 {
-	struct ieee80211_local *local = sdata->local;
 	u16 tid, params;
 	u16 initiator;
 
@@ -161,10 +160,9 @@
 						 WLAN_BACK_INITIATOR, 0);
 	else { /* WLAN_BACK_RECIPIENT */
 		spin_lock_bh(&sta->lock);
-		sta->ampdu_mlme.tid_state_tx[tid] =
-				HT_AGG_STATE_OPERATIONAL;
+		if (sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK)
+			___ieee80211_stop_tx_ba_session(sta, tid,
+							WLAN_BACK_RECIPIENT);
 		spin_unlock_bh(&sta->lock);
-		ieee80211_stop_tx_ba_session(&local->hw, sta->sta.addr, tid,
-					     WLAN_BACK_RECIPIENT);
 	}
 }
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index f1362f3..10d1385 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -455,6 +455,10 @@
 
 	ieee80211_sta_expire(sdata, IEEE80211_IBSS_INACTIVITY_LIMIT);
 
+	if (time_before(jiffies, ifibss->last_scan_completed +
+		       IEEE80211_IBSS_MERGE_INTERVAL))
+		return;
+
 	if (ieee80211_sta_active_ibss(sdata))
 		return;
 
@@ -655,7 +659,8 @@
 	printk(KERN_DEBUG "%s: Sending ProbeResp to %pM\n",
 	       sdata->dev->name, resp->da);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 588005c8..419f186 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -23,6 +23,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/etherdevice.h>
+#include <net/ieee80211_radiotap.h>
 #include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include "key.h"
@@ -162,21 +163,17 @@
 /* frame is destined to interface currently processed (incl. multicast frames) */
 #define IEEE80211_RX_RA_MATCH		BIT(1)
 #define IEEE80211_RX_AMSDU		BIT(2)
-#define IEEE80211_RX_CMNTR_REPORTED	BIT(3)
-#define IEEE80211_RX_FRAGMENTED		BIT(4)
+#define IEEE80211_RX_FRAGMENTED		BIT(3)
+/* only add flags here that do not change with subframes of an aMPDU */
 
 struct ieee80211_rx_data {
 	struct sk_buff *skb;
-	struct net_device *dev;
 	struct ieee80211_local *local;
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info *sta;
 	struct ieee80211_key *key;
-	struct ieee80211_rx_status *status;
-	struct ieee80211_rate *rate;
 
 	unsigned int flags;
-	int sent_ps_buffered;
 	int queue;
 	u32 tkip_iv32;
 	u16 tkip_iv16;
@@ -209,6 +206,9 @@
 
 struct ieee80211_if_vlan {
 	struct list_head list;
+
+	/* used for all tx if the VLAN is configured to 4-addr mode */
+	struct sta_info *sta;
 };
 
 struct mesh_stats {
@@ -312,6 +312,8 @@
 	} mfp; /* management frame protection */
 
 	int wmm_last_param_set;
+
+	u8 use_4addr;
 };
 
 enum ieee80211_ibss_request {
@@ -353,6 +355,7 @@
 	struct work_struct work;
 	struct timer_list housekeeping_timer;
 	struct timer_list mesh_path_timer;
+	struct timer_list mesh_path_root_timer;
 	struct sk_buff_head skb_queue;
 
 	unsigned long timers_running;
@@ -362,23 +365,23 @@
 	u8 mesh_id[IEEE80211_MAX_MESH_ID_LEN];
 	size_t mesh_id_len;
 	/* Active Path Selection Protocol Identifier */
-	u8 mesh_pp_id[4];
+	u8 mesh_pp_id;
 	/* Active Path Selection Metric Identifier */
-	u8 mesh_pm_id[4];
+	u8 mesh_pm_id;
 	/* Congestion Control Mode Identifier */
-	u8 mesh_cc_id[4];
+	u8 mesh_cc_id;
 	/* Synchronization Protocol Identifier */
-	u8 mesh_sp_id[4];
+	u8 mesh_sp_id;
 	/* Authentication Protocol Identifier */
-	u8 mesh_auth_id[4];
-	/* Local mesh Destination Sequence Number */
-	u32 dsn;
+	u8 mesh_auth_id;
+	/* Local mesh Sequence Number */
+	u32 sn;
 	/* Last used PREQ ID */
 	u32 preq_id;
 	atomic_t mpaths;
-	/* Timestamp of last DSN update */
-	unsigned long last_dsn_update;
-	/* Timestamp of last DSN sent */
+	/* Timestamp of last SN update */
+	unsigned long last_sn_update;
+	/* Timestamp of last SN sent */
 	unsigned long last_preq;
 	struct mesh_rmc *rmc;
 	spinlock_t mesh_preq_queue_lock;
@@ -471,74 +474,11 @@
 	} u;
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *debugfsdir;
-	union {
-		struct {
-			struct dentry *drop_unencrypted;
-			struct dentry *bssid;
-			struct dentry *aid;
-			struct dentry *capab;
-			struct dentry *force_unicast_rateidx;
-			struct dentry *max_ratectrl_rateidx;
-		} sta;
-		struct {
-			struct dentry *drop_unencrypted;
-			struct dentry *num_sta_ps;
-			struct dentry *dtim_count;
-			struct dentry *force_unicast_rateidx;
-			struct dentry *max_ratectrl_rateidx;
-			struct dentry *num_buffered_multicast;
-		} ap;
-		struct {
-			struct dentry *drop_unencrypted;
-			struct dentry *peer;
-			struct dentry *force_unicast_rateidx;
-			struct dentry *max_ratectrl_rateidx;
-		} wds;
-		struct {
-			struct dentry *drop_unencrypted;
-			struct dentry *force_unicast_rateidx;
-			struct dentry *max_ratectrl_rateidx;
-		} vlan;
-		struct {
-			struct dentry *mode;
-		} monitor;
-	} debugfs;
 	struct {
+		struct dentry *dir;
 		struct dentry *default_key;
 		struct dentry *default_mgmt_key;
-	} common_debugfs;
-
-#ifdef CONFIG_MAC80211_MESH
-	struct dentry *mesh_stats_dir;
-	struct {
-		struct dentry *fwded_mcast;
-		struct dentry *fwded_unicast;
-		struct dentry *fwded_frames;
-		struct dentry *dropped_frames_ttl;
-		struct dentry *dropped_frames_no_route;
-		struct dentry *estab_plinks;
-		struct timer_list mesh_path_timer;
-	} mesh_stats;
-
-	struct dentry *mesh_config_dir;
-	struct {
-		struct dentry *dot11MeshRetryTimeout;
-		struct dentry *dot11MeshConfirmTimeout;
-		struct dentry *dot11MeshHoldingTimeout;
-		struct dentry *dot11MeshMaxRetries;
-		struct dentry *dot11MeshTTL;
-		struct dentry *auto_open_plinks;
-		struct dentry *dot11MeshMaxPeerLinks;
-		struct dentry *dot11MeshHWMPactivePathTimeout;
-		struct dentry *dot11MeshHWMPpreqMinInterval;
-		struct dentry *dot11MeshHWMPnetDiameterTraversalTime;
-		struct dentry *dot11MeshHWMPmaxPREQretries;
-		struct dentry *path_refresh_time;
-		struct dentry *min_discovery_timeout;
-	} mesh_config;
-#endif
-
+	} debugfs;
 #endif
 	/* must be last, dynamically sized area in this! */
 	struct ieee80211_vif vif;
@@ -639,7 +579,6 @@
 	/* number of interfaces with corresponding FIF_ flags */
 	int fif_fcsfail, fif_plcpfail, fif_control, fif_other_bss, fif_pspoll;
 	unsigned int filter_flags; /* FIF_* */
-	struct iw_statistics wstats;
 
 	/* protects the aggregated multicast list and filter calls */
 	spinlock_t filter_lock;
@@ -662,6 +601,14 @@
 	bool suspended;
 
 	/*
+	 * Resuming is true while suspended, but when we're reprogramming the
+	 * hardware -- at that time it's allowed to use ieee80211_queue_work()
+	 * again even though some other parts of the stack are still suspended
+	 * and we still drop received frames to avoid waking the stack.
+	 */
+	bool resuming;
+
+	/*
 	 * quiescing is true during the suspend process _only_ to
 	 * ease timer cancelling etc.
 	 */
@@ -730,10 +677,9 @@
 	unsigned long scanning;
 	struct cfg80211_ssid scan_ssid;
 	struct cfg80211_scan_request *int_scan_req;
-	struct cfg80211_scan_request *scan_req;
+	struct cfg80211_scan_request *scan_req, *hw_scan_req;
 	struct ieee80211_channel *scan_channel;
-	const u8 *orig_ies;
-	int orig_ies_len;
+	enum ieee80211_band hw_scan_band;
 	int scan_channel_idx;
 	int scan_ies_len;
 
@@ -818,53 +764,6 @@
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct local_debugfsdentries {
 		struct dentry *rcdir;
-		struct dentry *rcname;
-		struct dentry *frequency;
-		struct dentry *total_ps_buffered;
-		struct dentry *wep_iv;
-		struct dentry *tsf;
-		struct dentry *queues;
-		struct dentry *reset;
-		struct dentry *noack;
-		struct dentry *statistics;
-		struct local_debugfsdentries_statsdentries {
-			struct dentry *transmitted_fragment_count;
-			struct dentry *multicast_transmitted_frame_count;
-			struct dentry *failed_count;
-			struct dentry *retry_count;
-			struct dentry *multiple_retry_count;
-			struct dentry *frame_duplicate_count;
-			struct dentry *received_fragment_count;
-			struct dentry *multicast_received_frame_count;
-			struct dentry *transmitted_frame_count;
-			struct dentry *wep_undecryptable_count;
-			struct dentry *num_scans;
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
-			struct dentry *tx_handlers_drop;
-			struct dentry *tx_handlers_queued;
-			struct dentry *tx_handlers_drop_unencrypted;
-			struct dentry *tx_handlers_drop_fragment;
-			struct dentry *tx_handlers_drop_wep;
-			struct dentry *tx_handlers_drop_not_assoc;
-			struct dentry *tx_handlers_drop_unauth_port;
-			struct dentry *rx_handlers_drop;
-			struct dentry *rx_handlers_queued;
-			struct dentry *rx_handlers_drop_nullfunc;
-			struct dentry *rx_handlers_drop_defrag;
-			struct dentry *rx_handlers_drop_short;
-			struct dentry *rx_handlers_drop_passive_scan;
-			struct dentry *tx_expand_skb_head;
-			struct dentry *tx_expand_skb_head_cloned;
-			struct dentry *rx_expand_skb_head;
-			struct dentry *rx_expand_skb_head2;
-			struct dentry *rx_handlers_fragments;
-			struct dentry *tx_status_drop;
-#endif
-			struct dentry *dot11ACKFailureCount;
-			struct dentry *dot11RTSFailureCount;
-			struct dentry *dot11FCSErrorCount;
-			struct dentry *dot11RTSSuccessCount;
-		} stats;
 		struct dentry *stations;
 		struct dentry *keys;
 	} debugfs;
@@ -877,8 +776,9 @@
 	return netdev_priv(dev);
 }
 
-/* this struct represents 802.11n's RA/TID combination */
+/* this struct represents 802.11n's RA/TID combination along with our vif */
 struct ieee80211_ra_tid {
+	struct ieee80211_vif *vif;
 	u8 ra[ETH_ALEN];
 	u16 tid;
 };
@@ -905,12 +805,13 @@
 	u8 *wmm_param;
 	struct ieee80211_ht_cap *ht_cap_elem;
 	struct ieee80211_ht_info *ht_info_elem;
-	u8 *mesh_config;
+	struct ieee80211_meshconf_ie *mesh_config;
 	u8 *mesh_id;
 	u8 *peer_link;
 	u8 *preq;
 	u8 *prep;
 	u8 *perr;
+	struct ieee80211_rann_ie *rann;
 	u8 *ch_switch_elem;
 	u8 *country_elem;
 	u8 *pwr_constr_elem;
@@ -932,7 +833,6 @@
 	u8 ext_supp_rates_len;
 	u8 wmm_info_len;
 	u8 wmm_param_len;
-	u8 mesh_config_len;
 	u8 mesh_id_len;
 	u8 peer_link_len;
 	u8 preq_len;
@@ -1055,6 +955,18 @@
 netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 				       struct net_device *dev);
 
+/*
+ * radiotap header for status frames
+ */
+struct ieee80211_tx_status_rtap_hdr {
+	struct ieee80211_radiotap_header hdr;
+	u8 rate;
+	u8 padding_for_rate;
+	__le16 tx_flags;
+	u8 data_retries;
+} __attribute__ ((packed));
+
+
 /* HT */
 void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
 				       struct ieee80211_ht_cap *ht_cap_ie,
@@ -1083,6 +995,8 @@
 
 int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
 				   enum ieee80211_back_parties initiator);
+int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid,
+				    enum ieee80211_back_parties initiator);
 
 /* Spectrum management */
 void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
@@ -1122,8 +1036,7 @@
 				     struct ieee80211_hdr *hdr, const u8 *tsc,
 				     gfp_t gfp);
 void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata);
-void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
-		      int encrypt);
+void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
 void ieee802_11_parse_elems(u8 *start, size_t len,
 			    struct ieee802_11_elems *elems);
 u32 ieee802_11_parse_elems_crc(u8 *start, size_t len,
@@ -1160,7 +1073,8 @@
 			 u8 *extra, size_t extra_len, const u8 *bssid,
 			 const u8 *key, u8 key_len, u8 key_idx);
 int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
-			     const u8 *ie, size_t ie_len);
+			     const u8 *ie, size_t ie_len,
+			     enum ieee80211_band band);
 void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
 			      const u8 *ssid, size_t ssid_len,
 			      const u8 *ie, size_t ie_len);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index b8295cb..80c16f6 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -184,10 +184,12 @@
 		 * No need to check netif_running since we do not allow
 		 * it to start up with this invalid address.
 		 */
-		if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
+		if (compare_ether_addr(null_addr, ndev->dev_addr) == 0) {
 			memcpy(ndev->dev_addr,
 			       local->hw.wiphy->perm_addr,
 			       ETH_ALEN);
+			memcpy(ndev->perm_addr, ndev->dev_addr, ETH_ALEN);
+		}
 	}
 
 	/*
@@ -212,8 +214,8 @@
 		/* must be before the call to ieee80211_configure_filter */
 		local->monitors++;
 		if (local->monitors == 1) {
-			local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
-			hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
+			local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
+			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
 		}
 
 		if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
@@ -312,7 +314,7 @@
 	if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
 
-	netif_tx_start_all_queues(dev);
+	netif_start_queue(dev);
 
 	return 0;
  err_del_interface:
@@ -341,7 +343,7 @@
 	/*
 	 * Stop TX on this interface first.
 	 */
-	netif_tx_stop_all_queues(dev);
+	netif_stop_queue(dev);
 
 	/*
 	 * Now delete all active aggregation sessions.
@@ -433,8 +435,8 @@
 
 		local->monitors--;
 		if (local->monitors == 0) {
-			local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
-			hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
+			local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
+			hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
 		}
 
 		if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
@@ -750,14 +752,12 @@
 		ieee80211_mandatory_rates(sdata->local,
 			sdata->local->hw.conf.channel->band);
 	sdata->drop_unencrypted = 0;
+	if (type == NL80211_IFTYPE_STATION)
+		sdata->u.mgd.use_4addr = false;
 
 	return 0;
 }
 
-static struct device_type wiphy_type = {
-	.name	= "wlan",
-};
-
 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 		     struct net_device **new_dev, enum nl80211_iftype type,
 		     struct vif_params *params)
@@ -788,8 +788,8 @@
 		goto fail;
 
 	memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
+	memcpy(ndev->perm_addr, ndev->dev_addr, ETH_ALEN);
 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
-	SET_NETDEV_DEVTYPE(ndev, &wiphy_type);
 
 	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
 	sdata = netdev_priv(ndev);
@@ -811,6 +811,12 @@
 	/* setup type-dependent data */
 	ieee80211_setup_sdata(sdata, type);
 
+	if (params) {
+		ndev->ieee80211_ptr->use_4addr = params->use_4addr;
+		if (type == NL80211_IFTYPE_STATION)
+			sdata->u.mgd.use_4addr = params->use_4addr;
+	}
+
 	ret = register_netdevice(ndev);
 	if (ret)
 		goto fail;
@@ -854,22 +860,18 @@
 void ieee80211_remove_interfaces(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata, *tmp;
+	LIST_HEAD(unreg_list);
 
 	ASSERT_RTNL();
 
+	mutex_lock(&local->iflist_mtx);
 	list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
-		/*
-		 * we cannot hold the iflist_mtx across unregister_netdevice,
-		 * but we only need to hold it for list modifications to lock
-		 * out readers since we're under the RTNL here as all other
-		 * writers.
-		 */
-		mutex_lock(&local->iflist_mtx);
 		list_del(&sdata->list);
-		mutex_unlock(&local->iflist_mtx);
 
-		unregister_netdevice(sdata->dev);
+		unregister_netdevice_queue(sdata->dev, &unreg_list);
 	}
+	mutex_unlock(&local->iflist_mtx);
+	unregister_netdevice_many(&unreg_list);
 }
 
 static u32 ieee80211_idle_off(struct ieee80211_local *local,
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index 9572e00..a49f93b 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -118,18 +118,6 @@
 	struct {
 		struct dentry *stalink;
 		struct dentry *dir;
-		struct dentry *keylen;
-		struct dentry *flags;
-		struct dentry *keyidx;
-		struct dentry *hw_key_idx;
-		struct dentry *tx_rx_count;
-		struct dentry *algorithm;
-		struct dentry *tx_spec;
-		struct dentry *rx_spec;
-		struct dentry *replays;
-		struct dentry *icverrors;
-		struct dentry *key;
-		struct dentry *ifindex;
 		int cnt;
 	} debugfs;
 #endif
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 797f539..8116d1a 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -9,7 +9,6 @@
  */
 
 #include <net/mac80211.h>
-#include <net/ieee80211_radiotap.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/netdevice.h>
@@ -30,26 +29,11 @@
 #include "rate.h"
 #include "mesh.h"
 #include "wep.h"
-#include "wme.h"
-#include "aes_ccm.h"
 #include "led.h"
 #include "cfg.h"
 #include "debugfs.h"
 #include "debugfs_netdev.h"
 
-/*
- * For seeing transmitted packets on monitor interfaces
- * we have a radiotap header too.
- */
-struct ieee80211_tx_status_rtap_hdr {
-	struct ieee80211_radiotap_header hdr;
-	u8 rate;
-	u8 padding_for_rate;
-	__le16 tx_flags;
-	u8 data_retries;
-} __attribute__ ((packed));
-
-
 void ieee80211_configure_filter(struct ieee80211_local *local)
 {
 	u64 mc;
@@ -253,28 +237,6 @@
 	       BSS_CHANGED_ERP_SLOT;
 }
 
-void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
-				 struct sk_buff *skb)
-{
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	int tmp;
-
-	skb->pkt_type = IEEE80211_TX_STATUS_MSG;
-	skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
-		       &local->skb_queue : &local->skb_queue_unreliable, skb);
-	tmp = skb_queue_len(&local->skb_queue) +
-		skb_queue_len(&local->skb_queue_unreliable);
-	while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
-	       (skb = skb_dequeue(&local->skb_queue_unreliable))) {
-		dev_kfree_skb_irq(skb);
-		tmp--;
-		I802_DEBUG_INC(local->tx_status_drop);
-	}
-	tasklet_schedule(&local->tasklet);
-}
-EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
-
 static void ieee80211_tasklet_handler(unsigned long data)
 {
 	struct ieee80211_local *local = (struct ieee80211_local *) data;
@@ -296,14 +258,14 @@
 			break;
 		case IEEE80211_DELBA_MSG:
 			ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
-			ieee80211_stop_tx_ba_cb(local_to_hw(local),
-						ra_tid->ra, ra_tid->tid);
+			ieee80211_stop_tx_ba_cb(ra_tid->vif, ra_tid->ra,
+						ra_tid->tid);
 			dev_kfree_skb(skb);
 			break;
 		case IEEE80211_ADDBA_MSG:
 			ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
-			ieee80211_start_tx_ba_cb(local_to_hw(local),
-						 ra_tid->ra, ra_tid->tid);
+			ieee80211_start_tx_ba_cb(ra_tid->vif, ra_tid->ra,
+						 ra_tid->tid);
 			dev_kfree_skb(skb);
 			break ;
 		default:
@@ -315,299 +277,6 @@
 	}
 }
 
-static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
-					    struct sta_info *sta,
-					    struct sk_buff *skb)
-{
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-
-	/*
-	 * XXX: This is temporary!
-	 *
-	 *	The problem here is that when we get here, the driver will
-	 *	quite likely have pretty much overwritten info->control by
-	 *	using info->driver_data or info->rate_driver_data. Thus,
-	 *	when passing out the frame to the driver again, we would be
-	 *	passing completely bogus data since the driver would then
-	 *	expect a properly filled info->control. In mac80211 itself
-	 *	the same problem occurs, since we need info->control.vif
-	 *	internally.
-	 *
-	 *	To fix this, we should send the frame through TX processing
-	 *	again. However, it's not that simple, since the frame will
-	 *	have been software-encrypted (if applicable) already, and
-	 *	encrypting it again doesn't do much good. So to properly do
-	 *	that, we not only have to skip the actual 'raw' encryption
-	 *	(key selection etc. still has to be done!) but also the
-	 *	sequence number assignment since that impacts the crypto
-	 *	encapsulation, of course.
-	 *
-	 *	Hence, for now, fix the bug by just dropping the frame.
-	 */
-	goto drop;
-
-	sta->tx_filtered_count++;
-
-	/*
-	 * Clear the TX filter mask for this STA when sending the next
-	 * packet. If the STA went to power save mode, this will happen
-	 * when it wakes up for the next time.
-	 */
-	set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
-
-	/*
-	 * This code races in the following way:
-	 *
-	 *  (1) STA sends frame indicating it will go to sleep and does so
-	 *  (2) hardware/firmware adds STA to filter list, passes frame up
-	 *  (3) hardware/firmware processes TX fifo and suppresses a frame
-	 *  (4) we get TX status before having processed the frame and
-	 *	knowing that the STA has gone to sleep.
-	 *
-	 * This is actually quite unlikely even when both those events are
-	 * processed from interrupts coming in quickly after one another or
-	 * even at the same time because we queue both TX status events and
-	 * RX frames to be processed by a tasklet and process them in the
-	 * same order that they were received or TX status last. Hence, there
-	 * is no race as long as the frame RX is processed before the next TX
-	 * status, which drivers can ensure, see below.
-	 *
-	 * Note that this can only happen if the hardware or firmware can
-	 * actually add STAs to the filter list, if this is done by the
-	 * driver in response to set_tim() (which will only reduce the race
-	 * this whole filtering tries to solve, not completely solve it)
-	 * this situation cannot happen.
-	 *
-	 * To completely solve this race drivers need to make sure that they
-	 *  (a) don't mix the irq-safe/not irq-safe TX status/RX processing
-	 *	functions and
-	 *  (b) always process RX events before TX status events if ordering
-	 *      can be unknown, for example with different interrupt status
-	 *	bits.
-	 */
-	if (test_sta_flags(sta, WLAN_STA_PS) &&
-	    skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
-		skb_queue_tail(&sta->tx_filtered, skb);
-		return;
-	}
-
-	if (!test_sta_flags(sta, WLAN_STA_PS) &&
-	    !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
-		/* Software retry the packet once */
-		info->flags |= IEEE80211_TX_INTFL_RETRIED;
-		ieee80211_add_pending_skb(local, skb);
-		return;
-	}
-
- drop:
-#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
-	if (net_ratelimit())
-		printk(KERN_DEBUG "%s: dropped TX filtered frame, "
-		       "queue_len=%d PS=%d @%lu\n",
-		       wiphy_name(local->hw.wiphy),
-		       skb_queue_len(&sta->tx_filtered),
-		       !!test_sta_flags(sta, WLAN_STA_PS), jiffies);
-#endif
-	dev_kfree_skb(skb);
-}
-
-void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct sk_buff *skb2;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	struct ieee80211_local *local = hw_to_local(hw);
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	u16 frag, type;
-	__le16 fc;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_tx_status_rtap_hdr *rthdr;
-	struct ieee80211_sub_if_data *sdata;
-	struct net_device *prev_dev = NULL;
-	struct sta_info *sta;
-	int retry_count = -1, i;
-
-	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
-		/* the HW cannot have attempted that rate */
-		if (i >= hw->max_rates) {
-			info->status.rates[i].idx = -1;
-			info->status.rates[i].count = 0;
-		}
-
-		retry_count += info->status.rates[i].count;
-	}
-	if (retry_count < 0)
-		retry_count = 0;
-
-	rcu_read_lock();
-
-	sband = local->hw.wiphy->bands[info->band];
-
-	sta = sta_info_get(local, hdr->addr1);
-
-	if (sta) {
-		if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
-		    test_sta_flags(sta, WLAN_STA_PS)) {
-			/*
-			 * The STA is in power save mode, so assume
-			 * that this TX packet failed because of that.
-			 */
-			ieee80211_handle_filtered_frame(local, sta, skb);
-			rcu_read_unlock();
-			return;
-		}
-
-		fc = hdr->frame_control;
-
-		if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
-		    (ieee80211_is_data_qos(fc))) {
-			u16 tid, ssn;
-			u8 *qc;
-
-			qc = ieee80211_get_qos_ctl(hdr);
-			tid = qc[0] & 0xf;
-			ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
-						& IEEE80211_SCTL_SEQ);
-			ieee80211_send_bar(sta->sdata, hdr->addr1,
-					   tid, ssn);
-		}
-
-		if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
-			ieee80211_handle_filtered_frame(local, sta, skb);
-			rcu_read_unlock();
-			return;
-		} else {
-			if (!(info->flags & IEEE80211_TX_STAT_ACK))
-				sta->tx_retry_failed++;
-			sta->tx_retry_count += retry_count;
-		}
-
-		rate_control_tx_status(local, sband, sta, skb);
-		if (ieee80211_vif_is_mesh(&sta->sdata->vif))
-			ieee80211s_update_metric(local, sta, skb);
-	}
-
-	rcu_read_unlock();
-
-	ieee80211_led_tx(local, 0);
-
-	/* SNMP counters
-	 * Fragments are passed to low-level drivers as separate skbs, so these
-	 * are actually fragments, not frames. Update frame counters only for
-	 * the first fragment of the frame. */
-
-	frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
-	type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
-
-	if (info->flags & IEEE80211_TX_STAT_ACK) {
-		if (frag == 0) {
-			local->dot11TransmittedFrameCount++;
-			if (is_multicast_ether_addr(hdr->addr1))
-				local->dot11MulticastTransmittedFrameCount++;
-			if (retry_count > 0)
-				local->dot11RetryCount++;
-			if (retry_count > 1)
-				local->dot11MultipleRetryCount++;
-		}
-
-		/* This counter shall be incremented for an acknowledged MPDU
-		 * with an individual address in the address 1 field or an MPDU
-		 * with a multicast address in the address 1 field of type Data
-		 * or Management. */
-		if (!is_multicast_ether_addr(hdr->addr1) ||
-		    type == IEEE80211_FTYPE_DATA ||
-		    type == IEEE80211_FTYPE_MGMT)
-			local->dot11TransmittedFragmentCount++;
-	} else {
-		if (frag == 0)
-			local->dot11FailedCount++;
-	}
-
-	/* this was a transmitted frame, but now we want to reuse it */
-	skb_orphan(skb);
-
-	/*
-	 * This is a bit racy but we can avoid a lot of work
-	 * with this test...
-	 */
-	if (!local->monitors && !local->cooked_mntrs) {
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	/* send frame to monitor interfaces now */
-
-	if (skb_headroom(skb) < sizeof(*rthdr)) {
-		printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	rthdr = (struct ieee80211_tx_status_rtap_hdr *)
-				skb_push(skb, sizeof(*rthdr));
-
-	memset(rthdr, 0, sizeof(*rthdr));
-	rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
-	rthdr->hdr.it_present =
-		cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
-			    (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
-			    (1 << IEEE80211_RADIOTAP_RATE));
-
-	if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
-	    !is_multicast_ether_addr(hdr->addr1))
-		rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
-
-	/*
-	 * XXX: Once radiotap gets the bitmap reset thing the vendor
-	 *	extensions proposal contains, we can actually report
-	 *	the whole set of tries we did.
-	 */
-	if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
-	    (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
-		rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
-	else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
-		rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
-	if (info->status.rates[0].idx >= 0 &&
-	    !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
-		rthdr->rate = sband->bitrates[
-				info->status.rates[0].idx].bitrate / 5;
-
-	/* for now report the total retry_count */
-	rthdr->data_retries = retry_count;
-
-	/* XXX: is this sufficient for BPF? */
-	skb_set_mac_header(skb, 0);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = htons(ETH_P_802_2);
-	memset(skb->cb, 0, sizeof(skb->cb));
-
-	rcu_read_lock();
-	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
-		if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
-			if (!netif_running(sdata->dev))
-				continue;
-
-			if (prev_dev) {
-				skb2 = skb_clone(skb, GFP_ATOMIC);
-				if (skb2) {
-					skb2->dev = prev_dev;
-					netif_rx(skb2);
-				}
-			}
-
-			prev_dev = sdata->dev;
-		}
-	}
-	if (prev_dev) {
-		skb->dev = prev_dev;
-		netif_rx(skb);
-		skb = NULL;
-	}
-	rcu_read_unlock();
-	dev_kfree_skb(skb);
-}
-EXPORT_SYMBOL(ieee80211_tx_status);
-
 static void ieee80211_restart_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
@@ -659,7 +328,9 @@
 	if (!wiphy)
 		return NULL;
 
-	wiphy->netnsok = true;
+	wiphy->flags |= WIPHY_FLAG_NETNS_OK |
+			WIPHY_FLAG_4ADDR_AP |
+			WIPHY_FLAG_4ADDR_STATION;
 	wiphy->privid = mac80211_wiphy_privid;
 
 	/* Yes, putting cfg80211_bss into ieee80211_bss is a hack */
@@ -901,6 +572,7 @@
 			i++;
 		}
 	}
+	local->int_scan_req->n_channels = i;
 
 	local->network_latency_notifier.notifier_call =
 		ieee80211_max_network_latency;
@@ -923,7 +595,6 @@
  fail_wep:
 	sta_info_stop(local);
  fail_sta_info:
-	debugfs_hw_del(local);
 	destroy_workqueue(local->workqueue);
  fail_workqueue:
 	wiphy_unregister(local->hw.wiphy);
@@ -959,10 +630,9 @@
 	ieee80211_clear_tx_pending(local);
 	sta_info_stop(local);
 	rate_control_deinitialize(local);
-	debugfs_hw_del(local);
 
-	if (skb_queue_len(&local->skb_queue)
-			|| skb_queue_len(&local->skb_queue_unreliable))
+	if (skb_queue_len(&local->skb_queue) ||
+	    skb_queue_len(&local->skb_queue_unreliable))
 		printk(KERN_WARNING "%s: skb_queue not empty\n",
 		       wiphy_name(local->hw.wiphy));
 	skb_queue_purge(&local->skb_queue);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index f7364e5..c0fe464 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
  * 	       Javier Cardona <javier@cozybit.com>
  *
@@ -14,18 +14,14 @@
 
 #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ)
 #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ)
+#define IEEE80211_MESH_RANN_INTERVAL	     (1 * HZ)
 
-#define PP_OFFSET 	1		/* Path Selection Protocol */
-#define PM_OFFSET	5		/* Path Selection Metric   */
-#define CC_OFFSET	9		/* Congestion Control Mode */
-#define SP_OFFSET	13		/* Synchronization Protocol */
-#define AUTH_OFFSET	17		/* Authentication Protocol */
-#define CAPAB_OFFSET 	22
-#define CAPAB_ACCEPT_PLINKS 0x80
-#define CAPAB_FORWARDING    0x10
+#define MESHCONF_CAPAB_ACCEPT_PLINKS 0x01
+#define MESHCONF_CAPAB_FORWARDING    0x08
 
 #define TMR_RUNNING_HK	0
 #define TMR_RUNNING_MP	1
+#define TMR_RUNNING_MPR	2
 
 int mesh_allocated;
 static struct kmem_cache *rm_cache;
@@ -50,7 +46,7 @@
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 
-	ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
+	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 
 	if (local->quiescing) {
 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
@@ -85,11 +81,11 @@
 	 */
 	if (ifmsh->mesh_id_len == ie->mesh_id_len &&
 		memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
-		memcmp(ifmsh->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_sp_id, ie->mesh_config + SP_OFFSET, 4) == 0 &&
-		memcmp(ifmsh->mesh_auth_id, ie->mesh_config + AUTH_OFFSET, 4) == 0)
+		(ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
+		(ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
+		(ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
+		(ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
+		(ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth))
 		return true;
 
 	return false;
@@ -102,7 +98,8 @@
  */
 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
 {
-	return (*(ie->mesh_config + CAPAB_OFFSET) & CAPAB_ACCEPT_PLINKS) != 0;
+	return (ie->mesh_config->meshconf_cap &
+	    MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
 }
 
 /**
@@ -128,18 +125,11 @@
 
 void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
 {
-	u8 oui[3] = {0x00, 0x0F, 0xAC};
-
-	memcpy(sta->mesh_pp_id, oui, sizeof(oui));
-	memcpy(sta->mesh_pm_id, oui, sizeof(oui));
-	memcpy(sta->mesh_cc_id, oui, sizeof(oui));
-	memcpy(sta->mesh_sp_id, oui, sizeof(oui));
-	memcpy(sta->mesh_auth_id, oui, sizeof(oui));
-	sta->mesh_pp_id[sizeof(oui)] = 0;
-	sta->mesh_pm_id[sizeof(oui)] = 0;
-	sta->mesh_cc_id[sizeof(oui)] = 0xff;
-	sta->mesh_sp_id[sizeof(oui)] = 0xff;
-	sta->mesh_auth_id[sizeof(oui)] = 0x0;
+	sta->mesh_pp_id = 0;	/* HWMP */
+	sta->mesh_pm_id = 0;	/* Airtime */
+	sta->mesh_cc_id = 0;	/* Disabled */
+	sta->mesh_sp_id = 0;	/* Neighbor Offset */
+	sta->mesh_auth_id = 0;	/* Disabled */
 }
 
 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
@@ -205,8 +195,8 @@
 			list_del(&p->list);
 			kmem_cache_free(rm_cache, p);
 			--entries;
-		} else if ((seqnum == p->seqnum)
-				&& (memcmp(sa, p->sa, ETH_ALEN) == 0))
+		} else if ((seqnum == p->seqnum) &&
+			   (memcmp(sa, p->sa, ETH_ALEN) == 0))
 			return -1;
 	}
 
@@ -228,6 +218,7 @@
 	struct ieee80211_supported_band *sband;
 	u8 *pos;
 	int len, i, rate;
+	u8 neighbors;
 
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 	len = sband->n_bitrates;
@@ -251,46 +242,49 @@
 		}
 	}
 
+	if (sband->band == IEEE80211_BAND_2GHZ) {
+		pos = skb_put(skb, 2 + 1);
+		*pos++ = WLAN_EID_DS_PARAMS;
+		*pos++ = 1;
+		*pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
+	}
+
 	pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
 	*pos++ = WLAN_EID_MESH_ID;
 	*pos++ = sdata->u.mesh.mesh_id_len;
 	if (sdata->u.mesh.mesh_id_len)
 		memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
 
-	pos = skb_put(skb, 2 + IEEE80211_MESH_CONFIG_LEN);
+	pos = skb_put(skb, 2 + sizeof(struct ieee80211_meshconf_ie));
 	*pos++ = WLAN_EID_MESH_CONFIG;
-	*pos++ = IEEE80211_MESH_CONFIG_LEN;
-	/* Version */
-	*pos++ = 1;
+	*pos++ = sizeof(struct ieee80211_meshconf_ie);
 
 	/* Active path selection protocol ID */
-	memcpy(pos, sdata->u.mesh.mesh_pp_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_pp_id;
 
 	/* Active path selection metric ID   */
-	memcpy(pos, sdata->u.mesh.mesh_pm_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_pm_id;
 
 	/* Congestion control mode identifier */
-	memcpy(pos, sdata->u.mesh.mesh_cc_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_cc_id;
 
 	/* Synchronization protocol identifier */
-	memcpy(pos, sdata->u.mesh.mesh_sp_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_sp_id;
 
 	/* Authentication Protocol identifier */
-	memcpy(pos, sdata->u.mesh.mesh_auth_id, 4);
-	pos += 4;
+	*pos++ = sdata->u.mesh.mesh_auth_id;
 
-	/* Mesh Formation Info */
-	memset(pos, 0x00, 1);
-	pos += 1;
+	/* Mesh Formation Info - number of neighbors */
+	neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks);
+	/* Number of neighbor mesh STAs or 15 whichever is smaller */
+	neighbors = (neighbors > 15) ? 15 : neighbors;
+	*pos++ = neighbors << 1;
 
 	/* Mesh capability */
 	sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
-	*pos = CAPAB_FORWARDING;
-	*pos++ |= sdata->u.mesh.accepting_plinks ? CAPAB_ACCEPT_PLINKS : 0x00;
+	*pos = MESHCONF_CAPAB_FORWARDING;
+	*pos++ |= sdata->u.mesh.accepting_plinks ?
+	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
 	*pos++ = 0x00;
 
 	return;
@@ -355,6 +349,34 @@
 	ieee80211_queue_work(&local->hw, &ifmsh->work);
 }
 
+static void ieee80211_mesh_path_root_timer(unsigned long data)
+{
+	struct ieee80211_sub_if_data *sdata =
+		(struct ieee80211_sub_if_data *) data;
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct ieee80211_local *local = sdata->local;
+
+	set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+
+	if (local->quiescing) {
+		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
+		return;
+	}
+
+	ieee80211_queue_work(&local->hw, &ifmsh->work);
+}
+
+void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
+{
+	if (ifmsh->mshcfg.dot11MeshHWMPRootMode)
+		set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+	else {
+		clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
+		/* stop running timer */
+		del_timer_sync(&ifmsh->mesh_path_root_timer);
+	}
+}
+
 /**
  * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
  * @hdr:    	802.11 frame header
@@ -365,8 +387,9 @@
  *
  * Return the length of the 802.11 (does not include a mesh control header)
  */
-int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, char
-		*meshda, char *meshsa) {
+int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
+				  const u8 *meshda, const u8 *meshsa)
+{
 	if (is_multicast_ether_addr(meshda)) {
 		*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
 		/* DA TA SA */
@@ -448,6 +471,15 @@
 		  round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
 }
 
+static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	mesh_path_tx_root_frame(sdata);
+	mod_timer(&ifmsh->mesh_path_root_timer,
+		  round_jiffies(jiffies + IEEE80211_MESH_RANN_INTERVAL));
+}
+
 #ifdef CONFIG_PM
 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data *sdata)
 {
@@ -462,6 +494,8 @@
 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
 	if (del_timer_sync(&ifmsh->mesh_path_timer))
 		set_bit(TMR_RUNNING_MP, &ifmsh->timers_running);
+	if (del_timer_sync(&ifmsh->mesh_path_root_timer))
+		set_bit(TMR_RUNNING_MPR, &ifmsh->timers_running);
 }
 
 void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
@@ -472,6 +506,9 @@
 		add_timer(&ifmsh->housekeeping_timer);
 	if (test_and_clear_bit(TMR_RUNNING_MP, &ifmsh->timers_running))
 		add_timer(&ifmsh->mesh_path_timer);
+	if (test_and_clear_bit(TMR_RUNNING_MPR, &ifmsh->timers_running))
+		add_timer(&ifmsh->mesh_path_root_timer);
+	ieee80211_mesh_root_setup(ifmsh);
 }
 #endif
 
@@ -480,7 +517,8 @@
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct ieee80211_local *local = sdata->local;
 
-	ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
+	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
+	ieee80211_mesh_root_setup(ifmsh);
 	ieee80211_queue_work(&local->hw, &ifmsh->work);
 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
@@ -491,6 +529,7 @@
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 {
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
+	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
 	/*
 	 * If the timer fired while we waited for it, it will have
 	 * requeued the work. Now the work will be running again
@@ -561,7 +600,7 @@
 					  struct ieee80211_rx_status *rx_status)
 {
 	switch (mgmt->u.action.category) {
-	case PLINK_CATEGORY:
+	case MESH_PLINK_CATEGORY:
 		mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
 		break;
 	case MESH_PATH_SEL_CATEGORY:
@@ -628,6 +667,9 @@
 
 	if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
 		ieee80211_mesh_housekeeping(sdata, ifmsh);
+
+	if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
+		ieee80211_mesh_rootpath(sdata);
 }
 
 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
@@ -673,7 +715,7 @@
 		MESH_MIN_DISCOVERY_TIMEOUT;
 	ifmsh->accepting_plinks = true;
 	ifmsh->preq_id = 0;
-	ifmsh->dsn = 0;
+	ifmsh->sn = 0;
 	atomic_set(&ifmsh->mpaths, 0);
 	mesh_rmc_init(sdata);
 	ifmsh->last_preq = jiffies;
@@ -684,6 +726,9 @@
 	setup_timer(&ifmsh->mesh_path_timer,
 		    ieee80211_mesh_path_timer,
 		    (unsigned long) sdata);
+	setup_timer(&ifmsh->mesh_path_root_timer,
+		    ieee80211_mesh_path_root_timer,
+		    (unsigned long) sdata);
 	INIT_LIST_HEAD(&ifmsh->preq_queue.list);
 	spin_lock_init(&ifmsh->mesh_preq_queue_lock);
 }
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index dd1c193..31e1025 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Authors:    Luis Carlos Cobo <luisca@cozybit.com>
  *             Javier Cardona <javier@cozybit.com>
  *
@@ -26,7 +26,7 @@
  *
  * @MESH_PATH_ACTIVE: the mesh path can be used for forwarding
  * @MESH_PATH_RESOLVING: the discovery process is running for this mesh path
- * @MESH_PATH_DSN_VALID: the mesh path contains a valid destination sequence
+ * @MESH_PATH_SN_VALID: the mesh path contains a valid destination sequence
  * 	number
  * @MESH_PATH_FIXED: the mesh path has been manually set and should not be
  * 	modified
@@ -38,7 +38,7 @@
 enum mesh_path_flags {
 	MESH_PATH_ACTIVE =	BIT(0),
 	MESH_PATH_RESOLVING =	BIT(1),
-	MESH_PATH_DSN_VALID =	BIT(2),
+	MESH_PATH_SN_VALID =	BIT(2),
 	MESH_PATH_FIXED	=	BIT(3),
 	MESH_PATH_RESOLVED =	BIT(4),
 };
@@ -53,11 +53,13 @@
  * to grow.
  * @MESH_WORK_GROW_MPP_TABLE: the mesh portals table is full and needs to
  * grow
+ * @MESH_WORK_ROOT: the mesh root station needs to send a frame
  */
 enum mesh_deferred_task_flags {
 	MESH_WORK_HOUSEKEEPING,
 	MESH_WORK_GROW_MPATH_TABLE,
 	MESH_WORK_GROW_MPP_TABLE,
+	MESH_WORK_ROOT,
 };
 
 /**
@@ -70,7 +72,7 @@
  * @timer: mesh path discovery timer
  * @frame_queue: pending queue for frames sent to this destination while the
  * 	path is unresolved
- * @dsn: destination sequence number of the destination
+ * @sn: target sequence number
  * @metric: current metric to this destination
  * @hop_count: hops to destination
  * @exp_time: in jiffies, when the path will expire or when it expired
@@ -94,7 +96,7 @@
 	struct timer_list timer;
 	struct sk_buff_head frame_queue;
 	struct rcu_head rcu;
-	u32 dsn;
+	u32 sn;
 	u32 metric;
 	u8 hop_count;
 	unsigned long exp_time;
@@ -174,7 +176,7 @@
 #define MESH_CFG_CMP_LEN 	(IEEE80211_MESH_CONFIG_LEN - 2)
 
 /* Default values, timeouts in ms */
-#define MESH_TTL 		5
+#define MESH_TTL 		31
 #define MESH_MAX_RETR	 	3
 #define MESH_RET_T 		100
 #define MESH_CONF_T 		100
@@ -206,13 +208,19 @@
 #define MESH_MAX_MPATHS		1024
 
 /* Pending ANA approval */
-#define PLINK_CATEGORY		30
+#define MESH_PLINK_CATEGORY	30
 #define MESH_PATH_SEL_CATEGORY	32
+#define MESH_PATH_SEL_ACTION	0
+
+/* PERR reason codes */
+#define PEER_RCODE_UNSPECIFIED  11
+#define PERR_RCODE_NO_ROUTE     12
+#define PERR_RCODE_DEST_UNREACH 13
 
 /* Public interfaces */
 /* Various */
 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
-		char *da, char *sa);
+				  const u8 *da, const u8 *sa);
 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
 		struct ieee80211_sub_if_data *sdata, char *addr4,
 		char *addr5, char *addr6);
@@ -234,6 +242,7 @@
 ieee80211_mesh_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb);
 void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata);
+void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh);
 
 /* Mesh paths */
 int mesh_nexthop_lookup(struct sk_buff *skb,
@@ -274,8 +283,8 @@
 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata,
 		struct mesh_table *tbl);
 /* Mesh paths */
-int mesh_path_error_tx(u8 *dest, __le32 dest_dsn, u8 *ra,
-		struct ieee80211_sub_if_data *sdata);
+int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode,
+		       const u8 *ra, struct ieee80211_sub_if_data *sdata);
 void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta);
 void mesh_path_flush_pending(struct mesh_path *mpath);
 void mesh_path_tx_pending(struct mesh_path *mpath);
@@ -288,6 +297,7 @@
 		struct ieee80211_sub_if_data *sdata);
 void mesh_path_quiesce(struct ieee80211_sub_if_data *sdata);
 void mesh_path_restart(struct ieee80211_sub_if_data *sdata);
+void mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata);
 
 extern int mesh_paths_generation;
 
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 29b82e9..833b2f3 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,6 +9,12 @@
 
 #include "mesh.h"
 
+#ifdef CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG
+#define mhwmp_dbg(fmt, args...)   printk(KERN_DEBUG "Mesh HWMP: " fmt, ##args)
+#else
+#define mhwmp_dbg(fmt, args...)   do { (void)(0); } while (0)
+#endif
+
 #define TEST_FRAME_LEN	8192
 #define MAX_METRIC	0xffffffff
 #define ARITH_SHIFT	8
@@ -21,6 +27,12 @@
 #define MP_F_DO	0x1
 /* Reply and forward */
 #define MP_F_RF	0x2
+/* Unknown Sequence Number */
+#define MP_F_USN    0x01
+/* Reason code Present */
+#define MP_F_RCODE  0x02
+
+static void mesh_queue_preq(struct mesh_path *, u8);
 
 static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae)
 {
@@ -29,6 +41,13 @@
 	return get_unaligned_le32(preq_elem + offset);
 }
 
+static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae)
+{
+	if (ae)
+		offset += 6;
+	return get_unaligned_le16(preq_elem + offset);
+}
+
 /* HWMP IE processing macros */
 #define AE_F			(1<<6)
 #define AE_F_SET(x)		(*x & AE_F)
@@ -37,30 +56,33 @@
 #define PREQ_IE_TTL(x)		(*(x + 2))
 #define PREQ_IE_PREQ_ID(x)	u32_field_get(x, 3, 0)
 #define PREQ_IE_ORIG_ADDR(x)	(x + 7)
-#define PREQ_IE_ORIG_DSN(x)	u32_field_get(x, 13, 0);
+#define PREQ_IE_ORIG_SN(x)	u32_field_get(x, 13, 0);
 #define PREQ_IE_LIFETIME(x)	u32_field_get(x, 17, AE_F_SET(x));
 #define PREQ_IE_METRIC(x) 	u32_field_get(x, 21, AE_F_SET(x));
-#define PREQ_IE_DST_F(x)	(*(AE_F_SET(x) ? x + 32 : x + 26))
-#define PREQ_IE_DST_ADDR(x) 	(AE_F_SET(x) ? x + 33 : x + 27)
-#define PREQ_IE_DST_DSN(x) 	u32_field_get(x, 33, AE_F_SET(x));
+#define PREQ_IE_TARGET_F(x)	(*(AE_F_SET(x) ? x + 32 : x + 26))
+#define PREQ_IE_TARGET_ADDR(x) 	(AE_F_SET(x) ? x + 33 : x + 27)
+#define PREQ_IE_TARGET_SN(x) 	u32_field_get(x, 33, AE_F_SET(x));
 
 
 #define PREP_IE_FLAGS(x)	PREQ_IE_FLAGS(x)
 #define PREP_IE_HOPCOUNT(x)	PREQ_IE_HOPCOUNT(x)
 #define PREP_IE_TTL(x)		PREQ_IE_TTL(x)
 #define PREP_IE_ORIG_ADDR(x)	(x + 3)
-#define PREP_IE_ORIG_DSN(x)	u32_field_get(x, 9, 0);
+#define PREP_IE_ORIG_SN(x)	u32_field_get(x, 9, 0);
 #define PREP_IE_LIFETIME(x)	u32_field_get(x, 13, AE_F_SET(x));
 #define PREP_IE_METRIC(x)	u32_field_get(x, 17, AE_F_SET(x));
-#define PREP_IE_DST_ADDR(x)	(AE_F_SET(x) ? x + 27 : x + 21)
-#define PREP_IE_DST_DSN(x)	u32_field_get(x, 27, AE_F_SET(x));
+#define PREP_IE_TARGET_ADDR(x)	(AE_F_SET(x) ? x + 27 : x + 21)
+#define PREP_IE_TARGET_SN(x)	u32_field_get(x, 27, AE_F_SET(x));
 
-#define PERR_IE_DST_ADDR(x)	(x + 2)
-#define PERR_IE_DST_DSN(x)	u32_field_get(x, 8, 0);
+#define PERR_IE_TTL(x)		(*(x))
+#define PERR_IE_TARGET_FLAGS(x)	(*(x + 2))
+#define PERR_IE_TARGET_ADDR(x)	(x + 3)
+#define PERR_IE_TARGET_SN(x)	u32_field_get(x, 9, 0);
+#define PERR_IE_TARGET_RCODE(x)	u16_field_get(x, 13, 0);
 
 #define MSEC_TO_TU(x) (x*1000/1024)
-#define DSN_GT(x, y) ((long) (y) - (long) (x) < 0)
-#define DSN_LT(x, y) ((long) (x) - (long) (y) < 0)
+#define SN_GT(x, y) ((long) (y) - (long) (x) < 0)
+#define SN_LT(x, y) ((long) (x) - (long) (y) < 0)
 
 #define net_traversal_jiffies(s) \
 	msecs_to_jiffies(s->u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime)
@@ -75,13 +97,17 @@
 enum mpath_frame_type {
 	MPATH_PREQ = 0,
 	MPATH_PREP,
-	MPATH_PERR
+	MPATH_PERR,
+	MPATH_RANN
 };
 
+static const u8 broadcast_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
 static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags,
-		u8 *orig_addr, __le32 orig_dsn, u8 dst_flags, u8 *dst,
-		__le32 dst_dsn, u8 *da, u8 hop_count, u8 ttl, __le32 lifetime,
-		__le32 metric, __le32 preq_id, struct ieee80211_sub_if_data *sdata)
+		u8 *orig_addr, __le32 orig_sn, u8 target_flags, u8 *target,
+		__le32 target_sn, const u8 *da, u8 hop_count, u8 ttl,
+		__le32 lifetime, __le32 metric, __le32 preq_id,
+		struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -103,21 +129,30 @@
 
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-	/* BSSID is left zeroed, wildcard value */
+	/* BSSID == SA */
+	memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 	mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
-	mgmt->u.action.u.mesh_action.action_code = action;
+	mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
 
 	switch (action) {
 	case MPATH_PREQ:
+		mhwmp_dbg("sending PREQ to %pM\n", target);
 		ie_len = 37;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREQ;
 		break;
 	case MPATH_PREP:
+		mhwmp_dbg("sending PREP to %pM\n", target);
 		ie_len = 31;
 		pos = skb_put(skb, 2 + ie_len);
 		*pos++ = WLAN_EID_PREP;
 		break;
+	case MPATH_RANN:
+		mhwmp_dbg("sending RANN from %pM\n", orig_addr);
+		ie_len = sizeof(struct ieee80211_rann_ie);
+		pos = skb_put(skb, 2 + ie_len);
+		*pos++ = WLAN_EID_RANN;
+		break;
 	default:
 		kfree_skb(skb);
 		return -ENOTSUPP;
@@ -133,34 +168,40 @@
 	}
 	memcpy(pos, orig_addr, ETH_ALEN);
 	pos += ETH_ALEN;
-	memcpy(pos, &orig_dsn, 4);
+	memcpy(pos, &orig_sn, 4);
 	pos += 4;
-	memcpy(pos, &lifetime, 4);
-	pos += 4;
+	if (action != MPATH_RANN) {
+		memcpy(pos, &lifetime, 4);
+		pos += 4;
+	}
 	memcpy(pos, &metric, 4);
 	pos += 4;
 	if (action == MPATH_PREQ) {
 		/* destination count */
 		*pos++ = 1;
-		*pos++ = dst_flags;
+		*pos++ = target_flags;
 	}
-	memcpy(pos, dst, ETH_ALEN);
-	pos += ETH_ALEN;
-	memcpy(pos, &dst_dsn, 4);
+	if (action != MPATH_RANN) {
+		memcpy(pos, target, ETH_ALEN);
+		pos += ETH_ALEN;
+		memcpy(pos, &target_sn, 4);
+	}
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 	return 0;
 }
 
 /**
  * mesh_send_path error - Sends a PERR mesh management frame
  *
- * @dst: broken destination
- * @dst_dsn: dsn of the broken destination
+ * @target: broken destination
+ * @target_sn: SN of the broken destination
+ * @target_rcode: reason code for this PERR
  * @ra: node this frame is addressed to
  */
-int mesh_path_error_tx(u8 *dst, __le32 dst_dsn, u8 *ra,
-		struct ieee80211_sub_if_data *sdata)
+int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn,
+		       __le16 target_rcode, const u8 *ra,
+		       struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -184,20 +225,32 @@
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
 	mgmt->u.action.category = MESH_PATH_SEL_CATEGORY;
-	mgmt->u.action.u.mesh_action.action_code = MPATH_PERR;
-	ie_len = 12;
+	mgmt->u.action.u.mesh_action.action_code = MESH_PATH_SEL_ACTION;
+	ie_len = 15;
 	pos = skb_put(skb, 2 + ie_len);
 	*pos++ = WLAN_EID_PERR;
 	*pos++ = ie_len;
-	/* mode flags, reserved */
-	*pos++ = 0;
+	/* ttl */
+	*pos++ = MESH_TTL;
 	/* number of destinations */
 	*pos++ = 1;
-	memcpy(pos, dst, ETH_ALEN);
+	/*
+	 * flags bit, bit 1 is unset if we know the sequence number and
+	 * bit 2 is set if we have a reason code
+	 */
+	*pos = 0;
+	if (!target_sn)
+		*pos |= MP_F_USN;
+	if (target_rcode)
+		*pos |= MP_F_RCODE;
+	pos++;
+	memcpy(pos, target, ETH_ALEN);
 	pos += ETH_ALEN;
-	memcpy(pos, &dst_dsn, 4);
+	memcpy(pos, &target_sn, 4);
+	pos += 4;
+	memcpy(pos, &target_rcode, 2);
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 	return 0;
 }
 
@@ -269,18 +322,17 @@
  */
 static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata,
 			    struct ieee80211_mgmt *mgmt,
-			    u8 *hwmp_ie)
+			    u8 *hwmp_ie, enum mpath_frame_type action)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct mesh_path *mpath;
 	struct sta_info *sta;
 	bool fresh_info;
 	u8 *orig_addr, *ta;
-	u32 orig_dsn, orig_metric;
+	u32 orig_sn, orig_metric;
 	unsigned long orig_lifetime, exp_time;
 	u32 last_hop_metric, new_metric;
 	bool process = true;
-	u8 action = mgmt->u.action.u.mesh_action.action_code;
 
 	rcu_read_lock();
 	sta = sta_info_get(local, mgmt->sa);
@@ -296,7 +348,7 @@
 	switch (action) {
 	case MPATH_PREQ:
 		orig_addr = PREQ_IE_ORIG_ADDR(hwmp_ie);
-		orig_dsn = PREQ_IE_ORIG_DSN(hwmp_ie);
+		orig_sn = PREQ_IE_ORIG_SN(hwmp_ie);
 		orig_lifetime = PREQ_IE_LIFETIME(hwmp_ie);
 		orig_metric = PREQ_IE_METRIC(hwmp_ie);
 		break;
@@ -309,7 +361,7 @@
 		 * information from both PREQ and PREP frames.
 		 */
 		orig_addr = PREP_IE_ORIG_ADDR(hwmp_ie);
-		orig_dsn = PREP_IE_ORIG_DSN(hwmp_ie);
+		orig_sn = PREP_IE_ORIG_SN(hwmp_ie);
 		orig_lifetime = PREP_IE_LIFETIME(hwmp_ie);
 		orig_metric = PREP_IE_METRIC(hwmp_ie);
 		break;
@@ -335,9 +387,9 @@
 			if (mpath->flags & MESH_PATH_FIXED)
 				fresh_info = false;
 			else if ((mpath->flags & MESH_PATH_ACTIVE) &&
-			    (mpath->flags & MESH_PATH_DSN_VALID)) {
-				if (DSN_GT(mpath->dsn, orig_dsn) ||
-				    (mpath->dsn == orig_dsn &&
+			    (mpath->flags & MESH_PATH_SN_VALID)) {
+				if (SN_GT(mpath->sn, orig_sn) ||
+				    (mpath->sn == orig_sn &&
 				     action == MPATH_PREQ &&
 				     new_metric > mpath->metric)) {
 					process = false;
@@ -356,9 +408,9 @@
 
 		if (fresh_info) {
 			mesh_path_assign_nexthop(mpath, sta);
-			mpath->flags |= MESH_PATH_DSN_VALID;
+			mpath->flags |= MESH_PATH_SN_VALID;
 			mpath->metric = new_metric;
-			mpath->dsn = orig_dsn;
+			mpath->sn = orig_sn;
 			mpath->exp_time = time_after(mpath->exp_time, exp_time)
 					  ?  mpath->exp_time : exp_time;
 			mesh_path_activate(mpath);
@@ -397,7 +449,7 @@
 
 		if (fresh_info) {
 			mesh_path_assign_nexthop(mpath, sta);
-			mpath->flags &= ~MESH_PATH_DSN_VALID;
+			mpath->flags &= ~MESH_PATH_SN_VALID;
 			mpath->metric = last_hop_metric;
 			mpath->exp_time = time_after(mpath->exp_time, exp_time)
 					  ?  mpath->exp_time : exp_time;
@@ -419,44 +471,47 @@
 {
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_path *mpath;
-	u8 *dst_addr, *orig_addr;
-	u8 dst_flags, ttl;
-	u32 orig_dsn, dst_dsn, lifetime;
+	u8 *target_addr, *orig_addr;
+	u8 target_flags, ttl;
+	u32 orig_sn, target_sn, lifetime;
 	bool reply = false;
 	bool forward = true;
 
-	/* Update destination DSN, if present */
-	dst_addr = PREQ_IE_DST_ADDR(preq_elem);
+	/* Update target SN, if present */
+	target_addr = PREQ_IE_TARGET_ADDR(preq_elem);
 	orig_addr = PREQ_IE_ORIG_ADDR(preq_elem);
-	dst_dsn = PREQ_IE_DST_DSN(preq_elem);
-	orig_dsn = PREQ_IE_ORIG_DSN(preq_elem);
-	dst_flags = PREQ_IE_DST_F(preq_elem);
+	target_sn = PREQ_IE_TARGET_SN(preq_elem);
+	orig_sn = PREQ_IE_ORIG_SN(preq_elem);
+	target_flags = PREQ_IE_TARGET_F(preq_elem);
 
-	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
+	mhwmp_dbg("received PREQ from %pM\n", orig_addr);
+
+	if (memcmp(target_addr, sdata->dev->dev_addr, ETH_ALEN) == 0) {
+		mhwmp_dbg("PREQ is for us\n");
 		forward = false;
 		reply = true;
 		metric = 0;
-		if (time_after(jiffies, ifmsh->last_dsn_update +
+		if (time_after(jiffies, ifmsh->last_sn_update +
 					net_traversal_jiffies(sdata)) ||
-		    time_before(jiffies, ifmsh->last_dsn_update)) {
-			dst_dsn = ++ifmsh->dsn;
-			ifmsh->last_dsn_update = jiffies;
+		    time_before(jiffies, ifmsh->last_sn_update)) {
+			target_sn = ++ifmsh->sn;
+			ifmsh->last_sn_update = jiffies;
 		}
 	} else {
 		rcu_read_lock();
-		mpath = mesh_path_lookup(dst_addr, sdata);
+		mpath = mesh_path_lookup(target_addr, sdata);
 		if (mpath) {
-			if ((!(mpath->flags & MESH_PATH_DSN_VALID)) ||
-					DSN_LT(mpath->dsn, dst_dsn)) {
-				mpath->dsn = dst_dsn;
-				mpath->flags |= MESH_PATH_DSN_VALID;
-			} else if ((!(dst_flags & MP_F_DO)) &&
+			if ((!(mpath->flags & MESH_PATH_SN_VALID)) ||
+					SN_LT(mpath->sn, target_sn)) {
+				mpath->sn = target_sn;
+				mpath->flags |= MESH_PATH_SN_VALID;
+			} else if ((!(target_flags & MP_F_DO)) &&
 					(mpath->flags & MESH_PATH_ACTIVE)) {
 				reply = true;
 				metric = mpath->metric;
-				dst_dsn = mpath->dsn;
-				if (dst_flags & MP_F_RF)
-					dst_flags |= MP_F_DO;
+				target_sn = mpath->sn;
+				if (target_flags & MP_F_RF)
+					target_flags |= MP_F_DO;
 				else
 					forward = false;
 			}
@@ -467,13 +522,14 @@
 	if (reply) {
 		lifetime = PREQ_IE_LIFETIME(preq_elem);
 		ttl = ifmsh->mshcfg.dot11MeshTTL;
-		if (ttl != 0)
-			mesh_path_sel_frame_tx(MPATH_PREP, 0, dst_addr,
-				cpu_to_le32(dst_dsn), 0, orig_addr,
-				cpu_to_le32(orig_dsn), mgmt->sa, 0, ttl,
+		if (ttl != 0) {
+			mhwmp_dbg("replying to the PREQ\n");
+			mesh_path_sel_frame_tx(MPATH_PREP, 0, target_addr,
+				cpu_to_le32(target_sn), 0, orig_addr,
+				cpu_to_le32(orig_sn), mgmt->sa, 0, ttl,
 				cpu_to_le32(lifetime), cpu_to_le32(metric),
 				0, sdata);
-		else
+		} else
 			ifmsh->mshstats.dropped_frames_ttl++;
 	}
 
@@ -487,13 +543,14 @@
 			ifmsh->mshstats.dropped_frames_ttl++;
 			return;
 		}
+		mhwmp_dbg("forwarding the PREQ from %pM\n", orig_addr);
 		--ttl;
 		flags = PREQ_IE_FLAGS(preq_elem);
 		preq_id = PREQ_IE_PREQ_ID(preq_elem);
 		hopcount = PREQ_IE_HOPCOUNT(preq_elem) + 1;
 		mesh_path_sel_frame_tx(MPATH_PREQ, flags, orig_addr,
-				cpu_to_le32(orig_dsn), dst_flags, dst_addr,
-				cpu_to_le32(dst_dsn), sdata->dev->broadcast,
+				cpu_to_le32(orig_sn), target_flags, target_addr,
+				cpu_to_le32(target_sn), broadcast_addr,
 				hopcount, ttl, cpu_to_le32(lifetime),
 				cpu_to_le32(metric), cpu_to_le32(preq_id),
 				sdata);
@@ -508,10 +565,12 @@
 				    u8 *prep_elem, u32 metric)
 {
 	struct mesh_path *mpath;
-	u8 *dst_addr, *orig_addr;
+	u8 *target_addr, *orig_addr;
 	u8 ttl, hopcount, flags;
 	u8 next_hop[ETH_ALEN];
-	u32 dst_dsn, orig_dsn, lifetime;
+	u32 target_sn, orig_sn, lifetime;
+
+	mhwmp_dbg("received PREP from %pM\n", PREP_IE_ORIG_ADDR(prep_elem));
 
 	/* Note that we divert from the draft nomenclature and denominate
 	 * destination to what the draft refers to as origininator. So in this
@@ -519,8 +578,8 @@
 	 * which corresponds with the originator of the PREQ which this PREP
 	 * replies
 	 */
-	dst_addr = PREP_IE_DST_ADDR(prep_elem);
-	if (memcmp(dst_addr, sdata->dev->dev_addr, ETH_ALEN) == 0)
+	target_addr = PREP_IE_TARGET_ADDR(prep_elem);
+	if (memcmp(target_addr, sdata->dev->dev_addr, ETH_ALEN) == 0)
 		/* destination, no forwarding required */
 		return;
 
@@ -531,7 +590,7 @@
 	}
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(dst_addr, sdata);
+	mpath = mesh_path_lookup(target_addr, sdata);
 	if (mpath)
 		spin_lock_bh(&mpath->state_lock);
 	else
@@ -547,13 +606,13 @@
 	lifetime = PREP_IE_LIFETIME(prep_elem);
 	hopcount = PREP_IE_HOPCOUNT(prep_elem) + 1;
 	orig_addr = PREP_IE_ORIG_ADDR(prep_elem);
-	dst_dsn = PREP_IE_DST_DSN(prep_elem);
-	orig_dsn = PREP_IE_ORIG_DSN(prep_elem);
+	target_sn = PREP_IE_TARGET_SN(prep_elem);
+	orig_sn = PREP_IE_ORIG_SN(prep_elem);
 
 	mesh_path_sel_frame_tx(MPATH_PREP, flags, orig_addr,
-		cpu_to_le32(orig_dsn), 0, dst_addr,
-		cpu_to_le32(dst_dsn), mpath->next_hop->sta.addr, hopcount, ttl,
-		cpu_to_le32(lifetime), cpu_to_le32(metric),
+		cpu_to_le32(orig_sn), 0, target_addr,
+		cpu_to_le32(target_sn), mpath->next_hop->sta.addr, hopcount,
+		ttl, cpu_to_le32(lifetime), cpu_to_le32(metric),
 		0, sdata);
 	rcu_read_unlock();
 
@@ -570,32 +629,96 @@
 static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata,
 			     struct ieee80211_mgmt *mgmt, u8 *perr_elem)
 {
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_path *mpath;
-	u8 *ta, *dst_addr;
-	u32 dst_dsn;
+	u8 ttl;
+	u8 *ta, *target_addr;
+	u8 target_flags;
+	u32 target_sn;
+	u16 target_rcode;
 
 	ta = mgmt->sa;
-	dst_addr = PERR_IE_DST_ADDR(perr_elem);
-	dst_dsn = PERR_IE_DST_DSN(perr_elem);
+	ttl = PERR_IE_TTL(perr_elem);
+	if (ttl <= 1) {
+		ifmsh->mshstats.dropped_frames_ttl++;
+		return;
+	}
+	ttl--;
+	target_flags = PERR_IE_TARGET_FLAGS(perr_elem);
+	target_addr = PERR_IE_TARGET_ADDR(perr_elem);
+	target_sn = PERR_IE_TARGET_SN(perr_elem);
+	target_rcode = PERR_IE_TARGET_RCODE(perr_elem);
+
 	rcu_read_lock();
-	mpath = mesh_path_lookup(dst_addr, sdata);
+	mpath = mesh_path_lookup(target_addr, sdata);
 	if (mpath) {
 		spin_lock_bh(&mpath->state_lock);
 		if (mpath->flags & MESH_PATH_ACTIVE &&
 		    memcmp(ta, mpath->next_hop->sta.addr, ETH_ALEN) == 0 &&
-		    (!(mpath->flags & MESH_PATH_DSN_VALID) ||
-		    DSN_GT(dst_dsn, mpath->dsn))) {
+		    (!(mpath->flags & MESH_PATH_SN_VALID) ||
+		    SN_GT(target_sn, mpath->sn))) {
 			mpath->flags &= ~MESH_PATH_ACTIVE;
-			mpath->dsn = dst_dsn;
+			mpath->sn = target_sn;
 			spin_unlock_bh(&mpath->state_lock);
-			mesh_path_error_tx(dst_addr, cpu_to_le32(dst_dsn),
-					   sdata->dev->broadcast, sdata);
+			mesh_path_error_tx(ttl, target_addr, cpu_to_le32(target_sn),
+					   cpu_to_le16(target_rcode),
+					   broadcast_addr, sdata);
 		} else
 			spin_unlock_bh(&mpath->state_lock);
 	}
 	rcu_read_unlock();
 }
 
+static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata,
+				struct ieee80211_mgmt *mgmt,
+				struct ieee80211_rann_ie *rann)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	struct mesh_path *mpath;
+	u8 *ta;
+	u8 ttl, flags, hopcount;
+	u8 *orig_addr;
+	u32 orig_sn, metric;
+
+	ta = mgmt->sa;
+	ttl = rann->rann_ttl;
+	if (ttl <= 1) {
+		ifmsh->mshstats.dropped_frames_ttl++;
+		return;
+	}
+	ttl--;
+	flags = rann->rann_flags;
+	orig_addr = rann->rann_addr;
+	orig_sn = rann->rann_seq;
+	hopcount = rann->rann_hopcount;
+	hopcount++;
+	metric = rann->rann_metric;
+	mhwmp_dbg("received RANN from %pM\n", orig_addr);
+
+	rcu_read_lock();
+	mpath = mesh_path_lookup(orig_addr, sdata);
+	if (!mpath) {
+		mesh_path_add(orig_addr, sdata);
+		mpath = mesh_path_lookup(orig_addr, sdata);
+		if (!mpath) {
+			rcu_read_unlock();
+			sdata->u.mesh.mshstats.dropped_frames_no_route++;
+			return;
+		}
+		mesh_queue_preq(mpath,
+				PREQ_Q_F_START | PREQ_Q_F_REFRESH);
+	}
+	if (mpath->sn < orig_sn) {
+		mesh_path_sel_frame_tx(MPATH_RANN, flags, orig_addr,
+				       cpu_to_le32(orig_sn),
+				       0, NULL, 0, broadcast_addr,
+				       hopcount, ttl, 0,
+				       cpu_to_le32(metric + mpath->metric),
+				       0, sdata);
+		mpath->sn = orig_sn;
+	}
+	rcu_read_unlock();
+}
 
 
 void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata,
@@ -614,34 +737,34 @@
 	ieee802_11_parse_elems(mgmt->u.action.u.mesh_action.variable,
 			len - baselen, &elems);
 
-	switch (mgmt->u.action.u.mesh_action.action_code) {
-	case MPATH_PREQ:
-		if (!elems.preq || elems.preq_len != 37)
+	if (elems.preq) {
+		if (elems.preq_len != 37)
 			/* Right now we support just 1 destination and no AE */
 			return;
-		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq);
-		if (!last_hop_metric)
-			return;
-		hwmp_preq_frame_process(sdata, mgmt, elems.preq, last_hop_metric);
-		break;
-	case MPATH_PREP:
-		if (!elems.prep || elems.prep_len != 31)
+		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.preq,
+						      MPATH_PREQ);
+		if (last_hop_metric)
+			hwmp_preq_frame_process(sdata, mgmt, elems.preq,
+						last_hop_metric);
+	}
+	if (elems.prep) {
+		if (elems.prep_len != 31)
 			/* Right now we support no AE */
 			return;
-		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep);
-		if (!last_hop_metric)
-			return;
-		hwmp_prep_frame_process(sdata, mgmt, elems.prep, last_hop_metric);
-		break;
-	case MPATH_PERR:
-		if (!elems.perr || elems.perr_len != 12)
+		last_hop_metric = hwmp_route_info_get(sdata, mgmt, elems.prep,
+						      MPATH_PREP);
+		if (last_hop_metric)
+			hwmp_prep_frame_process(sdata, mgmt, elems.prep,
+						last_hop_metric);
+	}
+	if (elems.perr) {
+		if (elems.perr_len != 15)
 			/* Right now we support only one destination per PERR */
 			return;
 		hwmp_perr_frame_process(sdata, mgmt, elems.perr);
-	default:
-		return;
 	}
-
+	if (elems.rann)
+		hwmp_rann_frame_process(sdata, mgmt, elems.rann);
 }
 
 /**
@@ -661,7 +784,7 @@
 
 	preq_node = kmalloc(sizeof(struct mesh_preq_queue), GFP_ATOMIC);
 	if (!preq_node) {
-		printk(KERN_DEBUG "Mesh HWMP: could not allocate PREQ node\n");
+		mhwmp_dbg("could not allocate PREQ node\n");
 		return;
 	}
 
@@ -670,7 +793,7 @@
 		spin_unlock(&ifmsh->mesh_preq_queue_lock);
 		kfree(preq_node);
 		if (printk_ratelimit())
-			printk(KERN_DEBUG "Mesh HWMP: PREQ node queue full\n");
+			mhwmp_dbg("PREQ node queue full\n");
 		return;
 	}
 
@@ -705,7 +828,7 @@
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct mesh_preq_queue *preq_node;
 	struct mesh_path *mpath;
-	u8 ttl, dst_flags;
+	u8 ttl, target_flags;
 	u32 lifetime;
 
 	spin_lock_bh(&ifmsh->mesh_preq_queue_lock);
@@ -747,11 +870,11 @@
 
 	ifmsh->last_preq = jiffies;
 
-	if (time_after(jiffies, ifmsh->last_dsn_update +
+	if (time_after(jiffies, ifmsh->last_sn_update +
 				net_traversal_jiffies(sdata)) ||
-	    time_before(jiffies, ifmsh->last_dsn_update)) {
-		++ifmsh->dsn;
-		sdata->u.mesh.last_dsn_update = jiffies;
+	    time_before(jiffies, ifmsh->last_sn_update)) {
+		++ifmsh->sn;
+		sdata->u.mesh.last_sn_update = jiffies;
 	}
 	lifetime = default_lifetime(sdata);
 	ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
@@ -762,14 +885,14 @@
 	}
 
 	if (preq_node->flags & PREQ_Q_F_REFRESH)
-		dst_flags = MP_F_DO;
+		target_flags = MP_F_DO;
 	else
-		dst_flags = MP_F_RF;
+		target_flags = MP_F_RF;
 
 	spin_unlock_bh(&mpath->state_lock);
 	mesh_path_sel_frame_tx(MPATH_PREQ, 0, sdata->dev->dev_addr,
-			cpu_to_le32(ifmsh->dsn), dst_flags, mpath->dst,
-			cpu_to_le32(mpath->dsn), sdata->dev->broadcast, 0,
+			cpu_to_le32(ifmsh->sn), target_flags, mpath->dst,
+			cpu_to_le32(mpath->sn), broadcast_addr, 0,
 			ttl, cpu_to_le32(lifetime), 0,
 			cpu_to_le32(ifmsh->preq_id++), sdata);
 	mod_timer(&mpath->timer, jiffies + mpath->discovery_timeout);
@@ -796,15 +919,15 @@
 	struct sk_buff *skb_to_free = NULL;
 	struct mesh_path *mpath;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	u8 *dst_addr = hdr->addr3;
+	u8 *target_addr = hdr->addr3;
 	int err = 0;
 
 	rcu_read_lock();
-	mpath = mesh_path_lookup(dst_addr, sdata);
+	mpath = mesh_path_lookup(target_addr, sdata);
 
 	if (!mpath) {
-		mesh_path_add(dst_addr, sdata);
-		mpath = mesh_path_lookup(dst_addr, sdata);
+		mesh_path_add(target_addr, sdata);
+		mpath = mesh_path_lookup(target_addr, sdata);
 		if (!mpath) {
 			sdata->u.mesh.mshstats.dropped_frames_no_route++;
 			err = -ENOSPC;
@@ -813,17 +936,16 @@
 	}
 
 	if (mpath->flags & MESH_PATH_ACTIVE) {
-		if (time_after(jiffies, mpath->exp_time +
-			msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time))
-				&& !memcmp(sdata->dev->dev_addr, hdr->addr4,
-					   ETH_ALEN)
-				&& !(mpath->flags & MESH_PATH_RESOLVING)
-				&& !(mpath->flags & MESH_PATH_FIXED)) {
+		if (time_after(jiffies,
+			       mpath->exp_time +
+			       msecs_to_jiffies(sdata->u.mesh.mshcfg.path_refresh_time)) &&
+		    !memcmp(sdata->dev->dev_addr, hdr->addr4, ETH_ALEN) &&
+		    !(mpath->flags & MESH_PATH_RESOLVING) &&
+		    !(mpath->flags & MESH_PATH_FIXED)) {
 			mesh_queue_preq(mpath,
 					PREQ_Q_F_START | PREQ_Q_F_REFRESH);
 		}
-		memcpy(hdr->addr1, mpath->next_hop->sta.addr,
-				ETH_ALEN);
+		memcpy(hdr->addr1, mpath->next_hop->sta.addr, ETH_ALEN);
 	} else {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 		if (!(mpath->flags & MESH_PATH_RESOLVING)) {
@@ -882,3 +1004,14 @@
 endmpathtimer:
 	rcu_read_unlock();
 }
+
+void
+mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	mesh_path_sel_frame_tx(MPATH_RANN, 0, sdata->dev->dev_addr,
+			       cpu_to_le32(++ifmsh->sn),
+			       0, NULL, 0, broadcast_addr,
+			       0, MESH_TTL, 0, 0, 0, sdata);
+}
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 751c4d0..a8da239 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -449,6 +449,7 @@
  */
 void mesh_plink_broken(struct sta_info *sta)
 {
+	static const u8 bcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
 	struct mesh_path *mpath;
 	struct mpath_node *node;
 	struct hlist_node *p;
@@ -463,11 +464,12 @@
 		    mpath->flags & MESH_PATH_ACTIVE &&
 		    !(mpath->flags & MESH_PATH_FIXED)) {
 			mpath->flags &= ~MESH_PATH_ACTIVE;
-			++mpath->dsn;
+			++mpath->sn;
 			spin_unlock_bh(&mpath->state_lock);
-			mesh_path_error_tx(mpath->dst,
-					cpu_to_le32(mpath->dsn),
-					sdata->dev->broadcast, sdata);
+			mesh_path_error_tx(MESH_TTL, mpath->dst,
+					cpu_to_le32(mpath->sn),
+					cpu_to_le16(PERR_RCODE_DEST_UNREACH),
+					bcast, sdata);
 		} else
 		spin_unlock_bh(&mpath->state_lock);
 	}
@@ -601,7 +603,7 @@
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	struct mesh_path *mpath;
-	u32 dsn = 0;
+	u32 sn = 0;
 
 	if (memcmp(hdr->addr4, sdata->dev->dev_addr, ETH_ALEN) != 0) {
 		u8 *ra, *da;
@@ -610,8 +612,9 @@
 		ra = hdr->addr1;
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
-			dsn = ++mpath->dsn;
-		mesh_path_error_tx(skb->data, cpu_to_le32(dsn), ra, sdata);
+			sn = ++mpath->sn;
+		mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(sn),
+				   cpu_to_le16(PERR_RCODE_NO_ROUTE), ra, sdata);
 	}
 
 	kfree_skb(skb);
@@ -646,7 +649,7 @@
 {
 	spin_lock_bh(&mpath->state_lock);
 	mesh_path_assign_nexthop(mpath, next_hop);
-	mpath->dsn = 0xffff;
+	mpath->sn = 0xffff;
 	mpath->metric = 0;
 	mpath->hop_count = 0;
 	mpath->exp_time = 0;
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index ffcbad7..0f7c6e6 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2008 open80211s Ltd.
+ * Copyright (c) 2008, 2009 open80211s Ltd.
  * Author:     Luis Carlos Cobo <luisca@cozybit.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,8 @@
 #define mpl_dbg(fmt, args...)	do { (void)(0); } while (0)
 #endif
 
-#define PLINK_GET_FRAME_SUBTYPE(p) (p)
-#define PLINK_GET_LLID(p) (p + 1)
-#define PLINK_GET_PLID(p) (p + 3)
+#define PLINK_GET_LLID(p) (p + 4)
+#define PLINK_GET_PLID(p) (p + 6)
 
 #define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
 				jiffies + HZ * t / 1000))
@@ -65,6 +64,7 @@
 {
 	atomic_inc(&sdata->u.mesh.mshstats.estab_plinks);
 	mesh_accept_plinks_update(sdata);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
 }
 
 static inline
@@ -72,12 +72,13 @@
 {
 	atomic_dec(&sdata->u.mesh.mshstats.estab_plinks);
 	mesh_accept_plinks_update(sdata);
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON);
 }
 
 /**
  * mesh_plink_fsm_restart - restart a mesh peer link finite state machine
  *
- * @sta: mes peer link to restart
+ * @sta: mesh peer link to restart
  *
  * Locking: this function must be called holding sta->lock
  */
@@ -152,6 +153,7 @@
 	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
 	struct ieee80211_mgmt *mgmt;
 	bool include_plid = false;
+	static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A };
 	u8 *pos;
 	int ie_len;
 
@@ -169,7 +171,7 @@
 	memcpy(mgmt->da, da, ETH_ALEN);
 	memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
 	/* BSSID is left zeroed, wildcard value */
-	mgmt->u.action.category = PLINK_CATEGORY;
+	mgmt->u.action.category = MESH_PLINK_CATEGORY;
 	mgmt->u.action.u.plink_action.action_code = action;
 
 	if (action == PLINK_CLOSE)
@@ -179,7 +181,8 @@
 		if (action == PLINK_CONFIRM) {
 			pos = skb_put(skb, 4);
 			/* two-byte status code followed by two-byte AID */
-			memset(pos, 0, 4);
+			memset(pos, 0, 2);
+			memcpy(pos + 2, &plid, 2);
 		}
 		mesh_mgmt_ies_add(skb, sdata);
 	}
@@ -187,18 +190,18 @@
 	/* Add Peer Link Management element */
 	switch (action) {
 	case PLINK_OPEN:
-		ie_len = 3;
+		ie_len = 6;
 		break;
 	case PLINK_CONFIRM:
-		ie_len = 5;
+		ie_len = 8;
 		include_plid = true;
 		break;
 	case PLINK_CLOSE:
 	default:
 		if (!plid)
-			ie_len = 5;
+			ie_len = 8;
 		else {
-			ie_len = 7;
+			ie_len = 10;
 			include_plid = true;
 		}
 		break;
@@ -207,7 +210,8 @@
 	pos = skb_put(skb, 2 + ie_len);
 	*pos++ = WLAN_EID_PEER_LINK;
 	*pos++ = ie_len;
-	*pos++ = action;
+	memcpy(pos, meshpeeringproto, sizeof(meshpeeringproto));
+	pos += 4;
 	memcpy(pos, &llid, 2);
 	if (include_plid) {
 		pos += 2;
@@ -218,7 +222,7 @@
 		memcpy(pos, &reason, 2);
 	}
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 	return 0;
 }
 
@@ -395,6 +399,17 @@
 	u8 ie_len;
 	u8 *baseaddr;
 	__le16 plid, llid, reason;
+#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
+	static const char *mplstates[] = {
+		[PLINK_LISTEN] = "LISTEN",
+		[PLINK_OPN_SNT] = "OPN-SNT",
+		[PLINK_OPN_RCVD] = "OPN-RCVD",
+		[PLINK_CNF_RCVD] = "CNF_RCVD",
+		[PLINK_ESTAB] = "ESTAB",
+		[PLINK_HOLDING] = "HOLDING",
+		[PLINK_BLOCKED] = "BLOCKED"
+	};
+#endif
 
 	/* need action_code, aux */
 	if (len < IEEE80211_MIN_ACTION_SIZE + 3)
@@ -417,12 +432,13 @@
 		return;
 	}
 
-	ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link));
+	ftype = mgmt->u.action.u.plink_action.action_code;
 	ie_len = elems.peer_link_len;
-	if ((ftype == PLINK_OPEN && ie_len != 3) ||
-	    (ftype == PLINK_CONFIRM && ie_len != 5) ||
-	    (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) {
-		mpl_dbg("Mesh plink: incorrect plink ie length\n");
+	if ((ftype == PLINK_OPEN && ie_len != 6) ||
+	    (ftype == PLINK_CONFIRM && ie_len != 8) ||
+	    (ftype == PLINK_CLOSE && ie_len != 8 && ie_len != 10)) {
+		mpl_dbg("Mesh plink: incorrect plink ie length %d %d\n",
+		    ftype, ie_len);
 		return;
 	}
 
@@ -434,7 +450,7 @@
 	 * from the point of view of this host.
 	 */
 	memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2);
-	if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7))
+	if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 10))
 		memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2);
 
 	rcu_read_lock();
@@ -532,8 +548,8 @@
 		}
 	}
 
-	mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %d %d %d %d\n",
-		mgmt->sa, sta->plink_state,
+	mpl_dbg("Mesh plink (peer, state, llid, plid, event): %pM %s %d %d %d\n",
+		mgmt->sa, mplstates[sta->plink_state],
 		le16_to_cpu(sta->llid), le16_to_cpu(sta->plid),
 		event);
 	reason = 0;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index dc5049d..6dc7b5a 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -426,7 +426,8 @@
 		memcpy(pos, &sband->ht_cap.mcs, sizeof(sband->ht_cap.mcs));
 	}
 
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 
@@ -458,10 +459,18 @@
 	mgmt->u.deauth.reason_code = cpu_to_le16(reason);
 
 	if (stype == IEEE80211_STYPE_DEAUTH)
-		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len, cookie);
+		if (cookie)
+			__cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+		else
+			cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
 	else
-		cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len, cookie);
-	ieee80211_tx_skb(sdata, skb, ifmgd->flags & IEEE80211_STA_MFP_ENABLED);
+		if (cookie)
+			__cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
+		else
+			cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
+	if (!(ifmgd->flags & IEEE80211_STA_MFP_ENABLED))
+		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 void ieee80211_send_pspoll(struct ieee80211_local *local,
@@ -492,7 +501,8 @@
 	memcpy(pspoll->bssid, ifmgd->bssid, ETH_ALEN);
 	memcpy(pspoll->ta, sdata->dev->dev_addr, ETH_ALEN);
 
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 void ieee80211_send_nullfunc(struct ieee80211_local *local,
@@ -525,7 +535,8 @@
 	memcpy(nullfunc->addr2, sdata->dev->dev_addr, ETH_ALEN);
 	memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
 
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 /* spectrum management related things */
@@ -923,7 +934,7 @@
 	ieee80211_recalc_ps(local, -1);
 	mutex_unlock(&local->iflist_mtx);
 
-	netif_tx_start_all_queues(sdata->dev);
+	netif_start_queue(sdata->dev);
 	netif_carrier_on(sdata->dev);
 }
 
@@ -1055,7 +1066,7 @@
 	 * time -- we don't want the scan code to enable queues.
 	 */
 
-	netif_tx_stop_all_queues(sdata->dev);
+	netif_stop_queue(sdata->dev);
 	netif_carrier_off(sdata->dev);
 
 	rcu_read_lock();
@@ -1892,7 +1903,6 @@
 	fc = le16_to_cpu(mgmt->frame_control);
 
 	switch (fc & IEEE80211_FCTL_STYPE) {
-	case IEEE80211_STYPE_PROBE_REQ:
 	case IEEE80211_STYPE_PROBE_RESP:
 	case IEEE80211_STYPE_BEACON:
 	case IEEE80211_STYPE_AUTH:
@@ -1958,12 +1968,10 @@
 			/* no action */
 			break;
 		case RX_MGMT_CFG80211_DEAUTH:
-			cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len,
-					     NULL);
+			cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
 			break;
 		case RX_MGMT_CFG80211_DISASSOC:
-			cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len,
-					       NULL);
+			cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
 			break;
 		default:
 			WARN(1, "unexpected: %d", rma);
@@ -2018,7 +2026,7 @@
 		cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, skb->len);
 		break;
 	case RX_MGMT_CFG80211_DEAUTH:
-		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len, NULL);
+		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
 		break;
 	default:
 		WARN(1, "unexpected: %d", rma);
@@ -2500,6 +2508,7 @@
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
 	struct ieee80211_mgd_work *wk;
 	const u8 *bssid = NULL;
+	bool not_auth_yet = false;
 
 	mutex_lock(&ifmgd->mtx);
 
@@ -2509,6 +2518,8 @@
 	} else list_for_each_entry(wk, &ifmgd->work_list, list) {
 		if (&wk->bss->cbss == req->bss) {
 			bssid = req->bss->bssid;
+			if (wk->state == IEEE80211_MGD_STATE_PROBE)
+				not_auth_yet = true;
 			list_del(&wk->list);
 			kfree(wk);
 			break;
@@ -2516,6 +2527,20 @@
 	}
 
 	/*
+	 * If somebody requests authentication and we haven't
+	 * sent out an auth frame yet there's no need to send
+	 * out a deauth frame either. If the state was PROBE,
+	 * then this is the case. If it's AUTH we have sent a
+	 * frame, and if it's IDLE we have completed the auth
+	 * process already.
+	 */
+	if (not_auth_yet) {
+		mutex_unlock(&ifmgd->mtx);
+		__cfg80211_auth_canceled(sdata->dev, bssid);
+		return 0;
+	}
+
+	/*
 	 * cfg80211 should catch this ... but it's racy since
 	 * we can receive a deauth frame, process it, hand it
 	 * to cfg80211 while that's in a locked section already
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index b33efc4..b9007f8 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -163,8 +163,7 @@
 #ifdef CONFIG_MAC80211_DEBUGFS
 	debugfsdir = debugfs_create_dir("rc", local->hw.wiphy->debugfsdir);
 	local->debugfs.rcdir = debugfsdir;
-	local->debugfs.rcname = debugfs_create_file("name", 0400, debugfsdir,
-						    ref, &rcname_ops);
+	debugfs_create_file("name", 0400, debugfsdir, ref, &rcname_ops);
 #endif
 
 	ref->priv = ref->ops->alloc(&local->hw, debugfsdir);
@@ -188,9 +187,7 @@
 	ctrl_ref->ops->free(ctrl_ref->priv);
 
 #ifdef CONFIG_MAC80211_DEBUGFS
-	debugfs_remove(ctrl_ref->local->debugfs.rcname);
-	ctrl_ref->local->debugfs.rcname = NULL;
-	debugfs_remove(ctrl_ref->local->debugfs.rcdir);
+	debugfs_remove_recursive(ctrl_ref->local->debugfs.rcdir);
 	ctrl_ref->local->debugfs.rcdir = NULL;
 #endif
 
@@ -287,9 +284,16 @@
 	struct rate_control_ref *ref, *old;
 
 	ASSERT_RTNL();
+
 	if (local->open_count)
 		return -EBUSY;
 
+	if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) {
+		if (WARN_ON(!local->ops->set_rts_threshold))
+			return -EINVAL;
+		return 0;
+	}
+
 	ref = rate_control_alloc(name, local);
 	if (!ref) {
 		printk(KERN_WARNING "%s: Failed to select rate control "
@@ -308,7 +312,6 @@
 	       "algorithm '%s'\n", wiphy_name(local->hw.wiphy),
 	       ref->ops->name);
 
-
 	return 0;
 }
 
@@ -317,6 +320,10 @@
 	struct rate_control_ref *ref;
 
 	ref = local->rate_ctrl;
+
+	if (!ref)
+		return;
+
 	local->rate_ctrl = NULL;
 	rate_control_put(ref);
 }
diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h
index 2ab5ad9..cb9bd1f 100644
--- a/net/mac80211/rate.h
+++ b/net/mac80211/rate.h
@@ -59,6 +59,9 @@
 	void *priv_sta = sta->rate_ctrl_priv;
 	struct ieee80211_supported_band *sband;
 
+	if (!ref)
+		return;
+
 	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
 
 	ref->ops->rate_init(ref->priv, sband, ista, priv_sta);
@@ -72,7 +75,7 @@
 	struct ieee80211_sta *ista = &sta->sta;
 	void *priv_sta = sta->rate_ctrl_priv;
 
-	if (ref->ops->rate_update)
+	if (ref && ref->ops->rate_update)
 		ref->ops->rate_update(ref->priv, sband, ista,
 				      priv_sta, changed);
 }
@@ -97,7 +100,7 @@
 {
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct rate_control_ref *ref = sta->rate_ctrl;
-	if (sta->debugfs.dir && ref->ops->add_sta_debugfs)
+	if (ref && sta->debugfs.dir && ref->ops->add_sta_debugfs)
 		ref->ops->add_sta_debugfs(ref->priv, sta->rate_ctrl_priv,
 					  sta->debugfs.dir);
 #endif
@@ -107,7 +110,7 @@
 {
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct rate_control_ref *ref = sta->rate_ctrl;
-	if (ref->ops->remove_sta_debugfs)
+	if (ref && ref->ops->remove_sta_debugfs)
 		ref->ops->remove_sta_debugfs(ref->priv, sta->rate_ctrl_priv);
 #endif
 }
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7170bf4..f237df4 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -27,11 +27,6 @@
 #include "tkip.h"
 #include "wme.h"
 
-static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
-					   struct tid_ampdu_rx *tid_agg_rx,
-					   struct sk_buff *skb,
-					   u16 mpdu_seq_num,
-					   int bar_req);
 /*
  * monitor mode reception
  *
@@ -39,11 +34,8 @@
  * only useful for monitoring.
  */
 static struct sk_buff *remove_monitor_info(struct ieee80211_local *local,
-					   struct sk_buff *skb,
-					   int rtap_len)
+					   struct sk_buff *skb)
 {
-	skb_pull(skb, rtap_len);
-
 	if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS) {
 		if (likely(skb->len > FCS_LEN))
 			skb_trim(skb, skb->len - FCS_LEN);
@@ -59,15 +51,14 @@
 }
 
 static inline int should_drop_frame(struct sk_buff *skb,
-				    int present_fcs_len,
-				    int radiotap_len)
+				    int present_fcs_len)
 {
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 
 	if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC))
 		return 1;
-	if (unlikely(skb->len < 16 + present_fcs_len + radiotap_len))
+	if (unlikely(skb->len < 16 + present_fcs_len))
 		return 1;
 	if (ieee80211_is_ctl(hdr->frame_control) &&
 	    !ieee80211_is_pspoll(hdr->frame_control) &&
@@ -95,10 +86,6 @@
 	if (len & 1) /* padding for RX_FLAGS if necessary */
 		len++;
 
-	/* make sure radiotap starts at a naturally aligned address */
-	if (len % 8)
-		len = roundup(len, 8);
-
 	return len;
 }
 
@@ -116,6 +103,7 @@
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct ieee80211_radiotap_header *rthdr;
 	unsigned char *pos;
+	u16 rx_flags = 0;
 
 	rthdr = (struct ieee80211_radiotap_header *)skb_push(skb, rtap_len);
 	memset(rthdr, 0, rtap_len);
@@ -134,7 +122,7 @@
 
 	/* IEEE80211_RADIOTAP_TSFT */
 	if (status->flag & RX_FLAG_TSFT) {
-		*(__le64 *)pos = cpu_to_le64(status->mactime);
+		put_unaligned_le64(status->mactime, pos);
 		rthdr->it_present |=
 			cpu_to_le32(1 << IEEE80211_RADIOTAP_TSFT);
 		pos += 8;
@@ -166,17 +154,20 @@
 	pos++;
 
 	/* IEEE80211_RADIOTAP_CHANNEL */
-	*(__le16 *)pos = cpu_to_le16(status->freq);
+	put_unaligned_le16(status->freq, pos);
 	pos += 2;
 	if (status->band == IEEE80211_BAND_5GHZ)
-		*(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM |
-					     IEEE80211_CHAN_5GHZ);
+		put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ,
+				   pos);
+	else if (status->flag & RX_FLAG_HT)
+		put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
+				   pos);
 	else if (rate->flags & IEEE80211_RATE_ERP_G)
-		*(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_OFDM |
-					     IEEE80211_CHAN_2GHZ);
+		put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
+				   pos);
 	else
-		*(__le16 *)pos = cpu_to_le16(IEEE80211_CHAN_CCK |
-					     IEEE80211_CHAN_2GHZ);
+		put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
+				   pos);
 	pos += 2;
 
 	/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
@@ -205,10 +196,11 @@
 
 	/* IEEE80211_RADIOTAP_RX_FLAGS */
 	/* ensure 2 byte alignment for the 2 byte field as required */
-	if ((pos - (unsigned char *)rthdr) & 1)
+	if ((pos - (u8 *)rthdr) & 1)
 		pos++;
 	if (status->flag & RX_FLAG_FAILED_PLCP_CRC)
-		*(__le16 *)pos |= cpu_to_le16(IEEE80211_RADIOTAP_F_RX_BADPLCP);
+		rx_flags |= IEEE80211_RADIOTAP_F_RX_BADPLCP;
+	put_unaligned_le16(rx_flags, pos);
 	pos += 2;
 }
 
@@ -227,7 +219,6 @@
 	struct sk_buff *skb, *skb2;
 	struct net_device *prev_dev = NULL;
 	int present_fcs_len = 0;
-	int rtap_len = 0;
 
 	/*
 	 * First, we may need to make a copy of the skb because
@@ -237,25 +228,23 @@
 	 * We don't need to, of course, if we aren't going to return
 	 * the SKB because it has a bad FCS/PLCP checksum.
 	 */
-	if (status->flag & RX_FLAG_RADIOTAP)
-		rtap_len = ieee80211_get_radiotap_len(origskb->data);
-	else
-		/* room for the radiotap header based on driver features */
-		needed_headroom = ieee80211_rx_radiotap_len(local, status);
+
+	/* room for the radiotap header based on driver features */
+	needed_headroom = ieee80211_rx_radiotap_len(local, status);
 
 	if (local->hw.flags & IEEE80211_HW_RX_INCLUDES_FCS)
 		present_fcs_len = FCS_LEN;
 
 	if (!local->monitors) {
-		if (should_drop_frame(origskb, present_fcs_len, rtap_len)) {
+		if (should_drop_frame(origskb, present_fcs_len)) {
 			dev_kfree_skb(origskb);
 			return NULL;
 		}
 
-		return remove_monitor_info(local, origskb, rtap_len);
+		return remove_monitor_info(local, origskb);
 	}
 
-	if (should_drop_frame(origskb, present_fcs_len, rtap_len)) {
+	if (should_drop_frame(origskb, present_fcs_len)) {
 		/* only need to expand headroom if necessary */
 		skb = origskb;
 		origskb = NULL;
@@ -279,16 +268,14 @@
 		 */
 		skb = skb_copy_expand(origskb, needed_headroom, 0, GFP_ATOMIC);
 
-		origskb = remove_monitor_info(local, origskb, rtap_len);
+		origskb = remove_monitor_info(local, origskb);
 
 		if (!skb)
 			return origskb;
 	}
 
-	/* if necessary, prepend radiotap information */
-	if (!(status->flag & RX_FLAG_RADIOTAP))
-		ieee80211_add_rx_radiotap_header(local, skb, rate,
-						 needed_headroom);
+	/* prepend radiotap information */
+	ieee80211_add_rx_radiotap_header(local, skb, rate, needed_headroom);
 
 	skb_reset_mac_header(skb);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -489,7 +476,7 @@
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
 	unsigned int hdrlen = ieee80211_hdrlen(hdr->frame_control);
-	char *dev_addr = rx->dev->dev_addr;
+	char *dev_addr = rx->sdata->dev->dev_addr;
 
 	if (ieee80211_is_data(hdr->frame_control)) {
 		if (is_multicast_ether_addr(hdr->addr1)) {
@@ -518,7 +505,7 @@
 
 		if (ieee80211_is_action(hdr->frame_control)) {
 			mgmt = (struct ieee80211_mgmt *)hdr;
-			if (mgmt->u.action.category != PLINK_CATEGORY)
+			if (mgmt->u.action.category != MESH_PLINK_CATEGORY)
 				return RX_DROP_MONITOR;
 			return RX_CONTINUE;
 		}
@@ -543,6 +530,242 @@
 	return RX_CONTINUE;
 }
 
+#define SEQ_MODULO 0x1000
+#define SEQ_MASK   0xfff
+
+static inline int seq_less(u16 sq1, u16 sq2)
+{
+	return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
+}
+
+static inline u16 seq_inc(u16 sq)
+{
+	return (sq + 1) & SEQ_MASK;
+}
+
+static inline u16 seq_sub(u16 sq1, u16 sq2)
+{
+	return (sq1 - sq2) & SEQ_MASK;
+}
+
+
+static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
+					    struct tid_ampdu_rx *tid_agg_rx,
+					    int index,
+					    struct sk_buff_head *frames)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *rate = NULL;
+	struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
+	struct ieee80211_rx_status *status;
+
+	if (!skb)
+		goto no_frame;
+
+	status = IEEE80211_SKB_RXCB(skb);
+
+	/* release the reordered frames to stack */
+	sband = hw->wiphy->bands[status->band];
+	if (!(status->flag & RX_FLAG_HT))
+		rate = &sband->bitrates[status->rate_idx];
+	tid_agg_rx->stored_mpdu_num--;
+	tid_agg_rx->reorder_buf[index] = NULL;
+	__skb_queue_tail(frames, skb);
+
+no_frame:
+	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+}
+
+static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
+					     struct tid_ampdu_rx *tid_agg_rx,
+					     u16 head_seq_num,
+					     struct sk_buff_head *frames)
+{
+	int index;
+
+	while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
+		index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+							tid_agg_rx->buf_size;
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+	}
+}
+
+/*
+ * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
+ * the skb was added to the buffer longer than this time ago, the earlier
+ * frames that have not yet been received are assumed to be lost and the skb
+ * can be released for processing. This may also release other skb's from the
+ * reorder buffer if there are no additional gaps between the frames.
+ */
+#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
+
+/*
+ * As this function belongs to the RX path it must be under
+ * rcu_read_lock protection. It returns false if the frame
+ * can be processed immediately, true if it was consumed.
+ */
+static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
+					     struct tid_ampdu_rx *tid_agg_rx,
+					     struct sk_buff *skb,
+					     struct sk_buff_head *frames)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	u16 sc = le16_to_cpu(hdr->seq_ctrl);
+	u16 mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
+	u16 head_seq_num, buf_size;
+	int index;
+
+	buf_size = tid_agg_rx->buf_size;
+	head_seq_num = tid_agg_rx->head_seq_num;
+
+	/* frame with out of date sequence number */
+	if (seq_less(mpdu_seq_num, head_seq_num)) {
+		dev_kfree_skb(skb);
+		return true;
+	}
+
+	/*
+	 * If frame the sequence number exceeds our buffering window
+	 * size release some previous frames to make room for this one.
+	 */
+	if (!seq_less(mpdu_seq_num, head_seq_num + buf_size)) {
+		head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size));
+		/* release stored frames up to new head to stack */
+		ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num,
+						 frames);
+	}
+
+	/* Now the new frame is always in the range of the reordering buffer */
+
+	index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size;
+
+	/* check if we already stored this frame */
+	if (tid_agg_rx->reorder_buf[index]) {
+		dev_kfree_skb(skb);
+		return true;
+	}
+
+	/*
+	 * If the current MPDU is in the right order and nothing else
+	 * is stored we can process it directly, no need to buffer it.
+	 */
+	if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
+	    tid_agg_rx->stored_mpdu_num == 0) {
+		tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
+		return false;
+	}
+
+	/* put the frame in the reordering buffer */
+	tid_agg_rx->reorder_buf[index] = skb;
+	tid_agg_rx->reorder_time[index] = jiffies;
+	tid_agg_rx->stored_mpdu_num++;
+	/* release the buffer until next missing frame */
+	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+						tid_agg_rx->buf_size;
+	if (!tid_agg_rx->reorder_buf[index] &&
+	    tid_agg_rx->stored_mpdu_num > 1) {
+		/*
+		 * No buffers ready to be released, but check whether any
+		 * frames in the reorder buffer have timed out.
+		 */
+		int j;
+		int skipped = 1;
+		for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
+		     j = (j + 1) % tid_agg_rx->buf_size) {
+			if (!tid_agg_rx->reorder_buf[j]) {
+				skipped++;
+				continue;
+			}
+			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
+					HT_RX_REORDER_BUF_TIMEOUT))
+				break;
+
+#ifdef CONFIG_MAC80211_HT_DEBUG
+			if (net_ratelimit())
+				printk(KERN_DEBUG "%s: release an RX reorder "
+				       "frame due to timeout on earlier "
+				       "frames\n",
+				       wiphy_name(hw->wiphy));
+#endif
+			ieee80211_release_reorder_frame(hw, tid_agg_rx,
+							j, frames);
+
+			/*
+			 * Increment the head seq# also for the skipped slots.
+			 */
+			tid_agg_rx->head_seq_num =
+				(tid_agg_rx->head_seq_num + skipped) & SEQ_MASK;
+			skipped = 0;
+		}
+	} else while (tid_agg_rx->reorder_buf[index]) {
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+		index =	seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
+							tid_agg_rx->buf_size;
+	}
+
+	return true;
+}
+
+/*
+ * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns
+ * true if the MPDU was buffered, false if it should be processed.
+ */
+static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx,
+				       struct sk_buff_head *frames)
+{
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_local *local = rx->local;
+	struct ieee80211_hw *hw = &local->hw;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct sta_info *sta = rx->sta;
+	struct tid_ampdu_rx *tid_agg_rx;
+	u16 sc;
+	int tid;
+
+	if (!ieee80211_is_data_qos(hdr->frame_control))
+		goto dont_reorder;
+
+	/*
+	 * filter the QoS data rx stream according to
+	 * STA/TID and check if this STA/TID is on aggregation
+	 */
+
+	if (!sta)
+		goto dont_reorder;
+
+	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
+
+	if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL)
+		goto dont_reorder;
+
+	tid_agg_rx = sta->ampdu_mlme.tid_rx[tid];
+
+	/* qos null data frames are excluded */
+	if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC)))
+		goto dont_reorder;
+
+	/* new, potentially un-ordered, ampdu frame - process it */
+
+	/* reset session timer */
+	if (tid_agg_rx->timeout)
+		mod_timer(&tid_agg_rx->session_timer,
+			  TU_TO_EXP_TIME(tid_agg_rx->timeout));
+
+	/* if this mpdu is fragmented - terminate rx aggregation session */
+	sc = le16_to_cpu(hdr->seq_ctrl);
+	if (sc & IEEE80211_SCTL_FRAG) {
+		ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->sta.addr,
+			tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP);
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	if (ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, frames))
+		return;
+
+ dont_reorder:
+	__skb_queue_tail(frames, skb);
+}
 
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_check(struct ieee80211_rx_data *rx)
@@ -603,7 +826,9 @@
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 {
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	int keyidx;
 	int hdrlen;
 	ieee80211_rx_result result = RX_DROP_UNUSABLE;
@@ -644,6 +869,9 @@
 	if (!(rx->flags & IEEE80211_RX_RA_MATCH))
 		return RX_CONTINUE;
 
+	/* start without a key */
+	rx->key = NULL;
+
 	if (rx->sta)
 		stakey = rcu_dereference(rx->sta->key);
 
@@ -657,8 +885,8 @@
 			return RX_CONTINUE;
 	} else if (mmie_keyidx >= 0) {
 		/* Broadcast/multicast robust management frame / BIP */
-		if ((rx->status->flag & RX_FLAG_DECRYPTED) &&
-		    (rx->status->flag & RX_FLAG_IV_STRIPPED))
+		if ((status->flag & RX_FLAG_DECRYPTED) &&
+		    (status->flag & RX_FLAG_IV_STRIPPED))
 			return RX_CONTINUE;
 
 		if (mmie_keyidx < NUM_DEFAULT_KEYS ||
@@ -690,8 +918,8 @@
 		 * we somehow allow the driver to tell us which key
 		 * the hardware used if this flag is set?
 		 */
-		if ((rx->status->flag & RX_FLAG_DECRYPTED) &&
-		    (rx->status->flag & RX_FLAG_IV_STRIPPED))
+		if ((status->flag & RX_FLAG_DECRYPTED) &&
+		    (status->flag & RX_FLAG_IV_STRIPPED))
 			return RX_CONTINUE;
 
 		hdrlen = ieee80211_hdrlen(hdr->frame_control);
@@ -727,8 +955,8 @@
 	/* Check for weak IVs if possible */
 	if (rx->sta && rx->key->conf.alg == ALG_WEP &&
 	    ieee80211_is_data(hdr->frame_control) &&
-	    (!(rx->status->flag & RX_FLAG_IV_STRIPPED) ||
-	     !(rx->status->flag & RX_FLAG_DECRYPTED)) &&
+	    (!(status->flag & RX_FLAG_IV_STRIPPED) ||
+	     !(status->flag & RX_FLAG_DECRYPTED)) &&
 	    ieee80211_wep_is_weak_iv(rx->skb, rx->key))
 		rx->sta->wep_weak_iv_count++;
 
@@ -748,7 +976,7 @@
 	}
 
 	/* either the frame has been decrypted or will be dropped */
-	rx->status->flag |= RX_FLAG_DECRYPTED;
+	status->flag |= RX_FLAG_DECRYPTED;
 
 	return result;
 }
@@ -792,7 +1020,7 @@
 	struct ieee80211_local *local = sdata->local;
 
 	atomic_inc(&sdata->bss->num_sta_ps);
-	set_sta_flags(sta, WLAN_STA_PS);
+	set_sta_flags(sta, WLAN_STA_PS_STA);
 	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_SLEEP, &sta->sta);
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: STA %pM aid %d enters power save mode\n",
@@ -800,45 +1028,37 @@
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
 }
 
-static int ap_sta_ps_end(struct sta_info *sta)
+static void ap_sta_ps_end(struct sta_info *sta)
 {
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
-	struct ieee80211_local *local = sdata->local;
-	int sent, buffered;
 
 	atomic_dec(&sdata->bss->num_sta_ps);
 
-	clear_sta_flags(sta, WLAN_STA_PS);
-	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
-
-	if (!skb_queue_empty(&sta->ps_tx_buf))
-		sta_info_clear_tim_bit(sta);
+	clear_sta_flags(sta, WLAN_STA_PS_STA);
 
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: STA %pM aid %d exits power save mode\n",
 	       sdata->dev->name, sta->sta.addr, sta->sta.aid);
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
 
-	/* Send all buffered frames to the station */
-	sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered);
-	buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf);
-	sent += buffered;
-	local->total_ps_buffered -= buffered;
-
+	if (test_sta_flags(sta, WLAN_STA_PS_DRIVER)) {
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames "
-	       "since STA not sleeping anymore\n", sdata->dev->name,
-	       sta->sta.addr, sta->sta.aid, sent - buffered, buffered);
+		printk(KERN_DEBUG "%s: STA %pM aid %d driver-ps-blocked\n",
+		       sdata->dev->name, sta->sta.addr, sta->sta.aid);
 #endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+		return;
+	}
 
-	return sent;
+	ieee80211_sta_ps_deliver_wakeup(sta);
 }
 
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 {
 	struct sta_info *sta = rx->sta;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 
 	if (!sta)
 		return RX_CONTINUE;
@@ -869,9 +1089,8 @@
 
 	sta->rx_fragments++;
 	sta->rx_bytes += rx->skb->len;
-	sta->last_signal = rx->status->signal;
-	sta->last_qual = rx->status->qual;
-	sta->last_noise = rx->status->noise;
+	sta->last_signal = status->signal;
+	sta->last_noise = status->noise;
 
 	/*
 	 * Change STA power saving mode only at the end of a frame
@@ -880,7 +1099,7 @@
 	if (!ieee80211_has_morefrags(hdr->frame_control) &&
 	    (rx->sdata->vif.type == NL80211_IFTYPE_AP ||
 	     rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) {
-		if (test_sta_flags(sta, WLAN_STA_PS)) {
+		if (test_sta_flags(sta, WLAN_STA_PS_STA)) {
 			/*
 			 * Ignore doze->wake transitions that are
 			 * indicated by non-data frames, the standard
@@ -891,19 +1110,24 @@
 			 */
 			if (ieee80211_is_data(hdr->frame_control) &&
 			    !ieee80211_has_pm(hdr->frame_control))
-				rx->sent_ps_buffered += ap_sta_ps_end(sta);
+				ap_sta_ps_end(sta);
 		} else {
 			if (ieee80211_has_pm(hdr->frame_control))
 				ap_sta_ps_start(sta);
 		}
 	}
 
-	/* Drop data::nullfunc frames silently, since they are used only to
-	 * control station power saving mode. */
-	if (ieee80211_is_nullfunc(hdr->frame_control)) {
+	/*
+	 * Drop (qos-)data::nullfunc frames silently, since they
+	 * are used only to control station power saving mode.
+	 */
+	if (ieee80211_is_nullfunc(hdr->frame_control) ||
+	    ieee80211_is_qos_nullfunc(hdr->frame_control)) {
 		I802_DEBUG_INC(rx->local->rx_handlers_drop_nullfunc);
-		/* Update counter and free packet here to avoid counting this
-		 * as a dropped packed. */
+		/*
+		 * Update counter and free packet here to avoid
+		 * counting this as a dropped packed.
+		 */
 		sta->rx_packets++;
 		dev_kfree_skb(rx->skb);
 		return RX_QUEUED;
@@ -1103,9 +1327,7 @@
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_ps_poll(struct ieee80211_rx_data *rx)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
-	struct sk_buff *skb;
-	int no_pending_pkts;
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
 	__le16 fc = ((struct ieee80211_hdr *)rx->skb->data)->frame_control;
 
 	if (likely(!rx->sta || !ieee80211_is_pspoll(fc) ||
@@ -1116,56 +1338,10 @@
 	    (sdata->vif.type != NL80211_IFTYPE_AP_VLAN))
 		return RX_DROP_UNUSABLE;
 
-	skb = skb_dequeue(&rx->sta->tx_filtered);
-	if (!skb) {
-		skb = skb_dequeue(&rx->sta->ps_tx_buf);
-		if (skb)
-			rx->local->total_ps_buffered--;
-	}
-	no_pending_pkts = skb_queue_empty(&rx->sta->tx_filtered) &&
-		skb_queue_empty(&rx->sta->ps_tx_buf);
-
-	if (skb) {
-		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-		struct ieee80211_hdr *hdr =
-			(struct ieee80211_hdr *) skb->data;
-
-		/*
-		 * Tell TX path to send this frame even though the STA may
-		 * still remain is PS mode after this frame exchange.
-		 */
-		info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
-
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-		printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n",
-		       rx->sta->sta.addr, rx->sta->sta.aid,
-		       skb_queue_len(&rx->sta->ps_tx_buf));
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-
-		/* Use MoreData flag to indicate whether there are more
-		 * buffered frames for this STA */
-		if (no_pending_pkts)
-			hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
-		else
-			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
-
-		ieee80211_add_pending_skb(rx->local, skb);
-
-		if (no_pending_pkts)
-			sta_info_clear_tim_bit(rx->sta);
-#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	} else if (!rx->sent_ps_buffered) {
-		/*
-		 * FIXME: This can be the result of a race condition between
-		 *	  us expiring a frame and the station polling for it.
-		 *	  Should we send it a null-func frame indicating we
-		 *	  have nothing buffered for it?
-		 */
-		printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
-		       "though there are no buffered frames for it\n",
-		       rx->dev->name, rx->sta->sta.addr);
-#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
-	}
+	if (!test_sta_flags(rx->sta, WLAN_STA_PS_DRIVER))
+		ieee80211_sta_ps_deliver_poll_response(rx->sta);
+	else
+		set_sta_flags(rx->sta, WLAN_STA_PSPOLL);
 
 	/* Free PS Poll skb here instead of returning RX_DROP that would
 	 * count as an dropped frame. */
@@ -1206,11 +1382,14 @@
 static int
 ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 {
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+
 	/*
 	 * Pass through unencrypted frames if the hardware has
 	 * decrypted them already.
 	 */
-	if (rx->status->flag & RX_FLAG_DECRYPTED)
+	if (status->flag & RX_FLAG_DECRYPTED)
 		return 0;
 
 	/* Drop unencrypted frames if key is set. */
@@ -1224,8 +1403,8 @@
 			     rx->key))
 			return -EACCES;
 		/* BIP does not use Protected field, so need to check MMIE */
-		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb)
-			     && ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
+		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
+			     ieee80211_get_mmie_keyidx(rx->skb) < 0 &&
 			     rx->key))
 			return -EACCES;
 		/*
@@ -1244,8 +1423,18 @@
 static int
 __ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
 {
-	struct net_device *dev = rx->dev;
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct net_device *dev = sdata->dev;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+
+	if (ieee80211_has_a4(hdr->frame_control) &&
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN && !sdata->u.vlan.sta)
+		return -1;
+
+	if (is_multicast_ether_addr(hdr->addr1) &&
+	    ((sdata->vif.type == NL80211_IFTYPE_AP_VLAN && sdata->u.vlan.sta) ||
+	     (sdata->vif.type == NL80211_IFTYPE_STATION && sdata->u.mgd.use_4addr)))
+		return -1;
 
 	return ieee80211_data_to_8023(rx->skb, dev->dev_addr, sdata->vif.type);
 }
@@ -1264,7 +1453,7 @@
 	 * of whether the frame was encrypted or not.
 	 */
 	if (ehdr->h_proto == htons(ETH_P_PAE) &&
-	    (compare_ether_addr(ehdr->h_dest, rx->dev->dev_addr) == 0 ||
+	    (compare_ether_addr(ehdr->h_dest, rx->sdata->dev->dev_addr) == 0 ||
 	     compare_ether_addr(ehdr->h_dest, pae_group_addr) == 0))
 		return true;
 
@@ -1281,10 +1470,10 @@
 static void
 ieee80211_deliver_skb(struct ieee80211_rx_data *rx)
 {
-	struct net_device *dev = rx->dev;
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct net_device *dev = sdata->dev;
 	struct ieee80211_local *local = rx->local;
 	struct sk_buff *skb, *xmit_skb;
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
 	struct sta_info *dsta;
 
@@ -1294,7 +1483,8 @@
 	if ((sdata->vif.type == NL80211_IFTYPE_AP ||
 	     sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
 	    !(sdata->flags & IEEE80211_SDATA_DONT_BRIDGE_PACKETS) &&
-	    (rx->flags & IEEE80211_RX_RA_MATCH)) {
+	    (rx->flags & IEEE80211_RX_RA_MATCH) &&
+	    (sdata->vif.type != NL80211_IFTYPE_AP_VLAN || !sdata->u.vlan.sta)) {
 		if (is_multicast_ether_addr(ehdr->h_dest)) {
 			/*
 			 * send multicast frames both to higher layers in
@@ -1337,10 +1527,10 @@
 				skb = NULL;
 			} else {
 				u8 *data = skb->data;
-				size_t len = skb->len;
-				u8 *new = __skb_push(skb, align);
-				memmove(new, data, len);
-				__skb_trim(skb, len);
+				size_t len = skb_headlen(skb);
+				skb->data -= align;
+				memmove(skb->data, data, len);
+				skb_set_tail_pointer(skb, len);
 			}
 		}
 #endif
@@ -1365,7 +1555,7 @@
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_amsdu(struct ieee80211_rx_data *rx)
 {
-	struct net_device *dev = rx->dev;
+	struct net_device *dev = rx->sdata->dev;
 	struct ieee80211_local *local = rx->local;
 	u16 ethertype;
 	u8 *payload;
@@ -1490,12 +1680,11 @@
 	unsigned int hdrlen;
 	struct sk_buff *skb = rx->skb, *fwd_skb;
 	struct ieee80211_local *local = rx->local;
-	struct ieee80211_sub_if_data *sdata;
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
 
 	hdr = (struct ieee80211_hdr *) skb->data;
 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
 	mesh_hdr = (struct ieee80211s_hdr *) (skb->data + hdrlen);
-	sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
 
 	if (!ieee80211_is_data(hdr->frame_control))
 		return RX_CONTINUE;
@@ -1504,19 +1693,28 @@
 		/* illegal frame */
 		return RX_DROP_MONITOR;
 
-	if (!is_multicast_ether_addr(hdr->addr1) &&
-			(mesh_hdr->flags & MESH_FLAGS_AE_A5_A6)) {
+	if (mesh_hdr->flags & MESH_FLAGS_AE) {
 		struct mesh_path *mppath;
+		char *proxied_addr;
+		char *mpp_addr;
+
+		if (is_multicast_ether_addr(hdr->addr1)) {
+			mpp_addr = hdr->addr3;
+			proxied_addr = mesh_hdr->eaddr1;
+		} else {
+			mpp_addr = hdr->addr4;
+			proxied_addr = mesh_hdr->eaddr2;
+		}
 
 		rcu_read_lock();
-		mppath = mpp_path_lookup(mesh_hdr->eaddr2, sdata);
+		mppath = mpp_path_lookup(proxied_addr, sdata);
 		if (!mppath) {
-			mpp_path_add(mesh_hdr->eaddr2, hdr->addr4, sdata);
+			mpp_path_add(proxied_addr, mpp_addr, sdata);
 		} else {
 			spin_lock_bh(&mppath->state_lock);
 			mppath->exp_time = jiffies;
-			if (compare_ether_addr(mppath->mpp, hdr->addr4) != 0)
-				memcpy(mppath->mpp, hdr->addr4, ETH_ALEN);
+			if (compare_ether_addr(mppath->mpp, mpp_addr) != 0)
+				memcpy(mppath->mpp, mpp_addr, ETH_ALEN);
 			spin_unlock_bh(&mppath->state_lock);
 		}
 		rcu_read_unlock();
@@ -1524,7 +1722,7 @@
 
 	/* Frame has reached destination.  Don't forward */
 	if (!is_multicast_ether_addr(hdr->addr1) &&
-			compare_ether_addr(rx->dev->dev_addr, hdr->addr3) == 0)
+	    compare_ether_addr(sdata->dev->dev_addr, hdr->addr3) == 0)
 		return RX_CONTINUE;
 
 	mesh_hdr->ttl--;
@@ -1541,10 +1739,10 @@
 
 			if (!fwd_skb && net_ratelimit())
 				printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
-						   rx->dev->name);
+						   sdata->dev->name);
 
 			fwd_hdr =  (struct ieee80211_hdr *) fwd_skb->data;
-			memcpy(fwd_hdr->addr2, rx->dev->dev_addr, ETH_ALEN);
+			memcpy(fwd_hdr->addr2, sdata->dev->dev_addr, ETH_ALEN);
 			info = IEEE80211_SKB_CB(fwd_skb);
 			memset(info, 0, sizeof(*info));
 			info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
@@ -1578,7 +1776,7 @@
 	}
 
 	if (is_multicast_ether_addr(hdr->addr1) ||
-	    rx->dev->flags & IFF_PROMISC)
+	    sdata->dev->flags & IFF_PROMISC)
 		return RX_CONTINUE;
 	else
 		return RX_DROP_MONITOR;
@@ -1588,7 +1786,8 @@
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 {
-	struct net_device *dev = rx->dev;
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct net_device *dev = sdata->dev;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
 	__le16 fc = hdr->frame_control;
 	int err;
@@ -1599,6 +1798,14 @@
 	if (unlikely(!ieee80211_is_data_present(hdr->frame_control)))
 		return RX_DROP_MONITOR;
 
+	/*
+	 * Allow the cooked monitor interface of an AP to see 4-addr frames so
+	 * that a 4-addr station can be detected and moved into a separate VLAN
+	 */
+	if (ieee80211_has_a4(hdr->frame_control) &&
+	    sdata->vif.type == NL80211_IFTYPE_AP)
+		return RX_DROP_MONITOR;
+
 	err = __ieee80211_data_to_8023(rx);
 	if (unlikely(err))
 		return RX_DROP_UNUSABLE;
@@ -1617,7 +1824,7 @@
 }
 
 static ieee80211_rx_result debug_noinline
-ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
+ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames)
 {
 	struct ieee80211_local *local = rx->local;
 	struct ieee80211_hw *hw = &local->hw;
@@ -1632,11 +1839,11 @@
 
 	if (ieee80211_is_back_req(bar->frame_control)) {
 		if (!rx->sta)
-			return RX_CONTINUE;
+			return RX_DROP_MONITOR;
 		tid = le16_to_cpu(bar->control) >> 12;
 		if (rx->sta->ampdu_mlme.tid_state_rx[tid]
 					!= HT_AGG_STATE_OPERATIONAL)
-			return RX_CONTINUE;
+			return RX_DROP_MONITOR;
 		tid_agg_rx = rx->sta->ampdu_mlme.tid_rx[tid];
 
 		start_seq_num = le16_to_cpu(bar->start_seq_num) >> 4;
@@ -1646,13 +1853,11 @@
 			mod_timer(&tid_agg_rx->session_timer,
 				  TU_TO_EXP_TIME(tid_agg_rx->timeout));
 
-		/* manage reordering buffer according to requested */
-		/* sequence number */
-		rcu_read_lock();
-		ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL,
-						 start_seq_num, 1);
-		rcu_read_unlock();
-		return RX_DROP_UNUSABLE;
+		/* release stored frames up to start of BAR */
+		ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num,
+						 frames);
+		kfree_skb(skb);
+		return RX_QUEUED;
 	}
 
 	return RX_CONTINUE;
@@ -1701,14 +1906,14 @@
 	       mgmt->u.action.u.sa_query.trans_id,
 	       WLAN_SA_QUERY_TR_ID_LEN);
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 }
 
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 {
 	struct ieee80211_local *local = rx->local;
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
 	int len = rx->skb->len;
 
@@ -1820,7 +2025,7 @@
 static ieee80211_rx_result debug_noinline
 ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
 {
-	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(rx->dev);
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *) rx->skb->data;
 
 	if (!(rx->flags & IEEE80211_RX_RA_MATCH))
@@ -1858,11 +2063,11 @@
 		 * Some hardware seem to generate incorrect Michael MIC
 		 * reports; ignore them to avoid triggering countermeasures.
 		 */
-		goto ignore;
+		return;
 	}
 
 	if (!ieee80211_has_protected(hdr->frame_control))
-		goto ignore;
+		return;
 
 	if (rx->sdata->vif.type == NL80211_IFTYPE_AP && keyidx) {
 		/*
@@ -1871,37 +2076,35 @@
 		 * group keys and only the AP is sending real multicast
 		 * frames in the BSS.
 		 */
-		goto ignore;
+		return;
 	}
 
 	if (!ieee80211_is_data(hdr->frame_control) &&
 	    !ieee80211_is_auth(hdr->frame_control))
-		goto ignore;
+		return;
 
 	mac80211_ev_michael_mic_failure(rx->sdata, keyidx, hdr, NULL,
 					GFP_ATOMIC);
- ignore:
-	dev_kfree_skb(rx->skb);
-	rx->skb = NULL;
 }
 
 /* TODO: use IEEE80211_RX_FRAGMENTED */
-static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx)
+static void ieee80211_rx_cooked_monitor(struct ieee80211_rx_data *rx,
+					struct ieee80211_rate *rate)
 {
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_local *local = rx->local;
 	struct ieee80211_rtap_hdr {
 		struct ieee80211_radiotap_header hdr;
 		u8 flags;
-		u8 rate;
+		u8 rate_or_pad;
 		__le16 chan_freq;
 		__le16 chan_flags;
 	} __attribute__ ((packed)) *rthdr;
 	struct sk_buff *skb = rx->skb, *skb2;
 	struct net_device *prev_dev = NULL;
-	struct ieee80211_rx_status *status = rx->status;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
-	if (rx->flags & IEEE80211_RX_CMNTR_REPORTED)
+	if (status->flag & RX_FLAG_INTERNAL_CMTR)
 		goto out_free_skb;
 
 	if (skb_headroom(skb) < sizeof(*rthdr) &&
@@ -1913,10 +2116,13 @@
 	rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
 	rthdr->hdr.it_present =
 		cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) |
-			    (1 << IEEE80211_RADIOTAP_RATE) |
 			    (1 << IEEE80211_RADIOTAP_CHANNEL));
 
-	rthdr->rate = rx->rate->bitrate / 5;
+	if (rate) {
+		rthdr->rate_or_pad = rate->bitrate / 5;
+		rthdr->hdr.it_present |=
+			cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE);
+	}
 	rthdr->chan_freq = cpu_to_le16(status->freq);
 
 	if (status->band == IEEE80211_BAND_5GHZ)
@@ -1959,7 +2165,7 @@
 	} else
 		goto out_free_skb;
 
-	rx->flags |= IEEE80211_RX_CMNTR_REPORTED;
+	status->flag |= RX_FLAG_INTERNAL_CMTR;
 	return;
 
  out_free_skb:
@@ -1969,62 +2175,87 @@
 
 static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
 					 struct ieee80211_rx_data *rx,
-					 struct sk_buff *skb)
+					 struct sk_buff *skb,
+					 struct ieee80211_rate *rate)
 {
+	struct sk_buff_head reorder_release;
 	ieee80211_rx_result res = RX_DROP_MONITOR;
 
+	__skb_queue_head_init(&reorder_release);
+
 	rx->skb = skb;
 	rx->sdata = sdata;
-	rx->dev = sdata->dev;
 
 #define CALL_RXH(rxh)			\
 	do {				\
 		res = rxh(rx);		\
 		if (res != RX_CONTINUE)	\
-			goto rxh_done;  \
+			goto rxh_next;  \
 	} while (0);
 
+	/*
+	 * NB: the rxh_next label works even if we jump
+	 *     to it from here because then the list will
+	 *     be empty, which is a trivial check
+	 */
 	CALL_RXH(ieee80211_rx_h_passive_scan)
 	CALL_RXH(ieee80211_rx_h_check)
-	CALL_RXH(ieee80211_rx_h_decrypt)
-	CALL_RXH(ieee80211_rx_h_check_more_data)
-	CALL_RXH(ieee80211_rx_h_sta_process)
-	CALL_RXH(ieee80211_rx_h_defragment)
-	CALL_RXH(ieee80211_rx_h_ps_poll)
-	CALL_RXH(ieee80211_rx_h_michael_mic_verify)
-	/* must be after MMIC verify so header is counted in MPDU mic */
-	CALL_RXH(ieee80211_rx_h_remove_qos_control)
-	CALL_RXH(ieee80211_rx_h_amsdu)
+
+	ieee80211_rx_reorder_ampdu(rx, &reorder_release);
+
+	while ((skb = __skb_dequeue(&reorder_release))) {
+		/*
+		 * all the other fields are valid across frames
+		 * that belong to an aMPDU since they are on the
+		 * same TID from the same station
+		 */
+		rx->skb = skb;
+
+		CALL_RXH(ieee80211_rx_h_decrypt)
+		CALL_RXH(ieee80211_rx_h_check_more_data)
+		CALL_RXH(ieee80211_rx_h_sta_process)
+		CALL_RXH(ieee80211_rx_h_defragment)
+		CALL_RXH(ieee80211_rx_h_ps_poll)
+		CALL_RXH(ieee80211_rx_h_michael_mic_verify)
+		/* must be after MMIC verify so header is counted in MPDU mic */
+		CALL_RXH(ieee80211_rx_h_remove_qos_control)
+		CALL_RXH(ieee80211_rx_h_amsdu)
 #ifdef CONFIG_MAC80211_MESH
-	if (ieee80211_vif_is_mesh(&sdata->vif))
-		CALL_RXH(ieee80211_rx_h_mesh_fwding);
+		if (ieee80211_vif_is_mesh(&sdata->vif))
+			CALL_RXH(ieee80211_rx_h_mesh_fwding);
 #endif
-	CALL_RXH(ieee80211_rx_h_data)
-	CALL_RXH(ieee80211_rx_h_ctrl)
-	CALL_RXH(ieee80211_rx_h_action)
-	CALL_RXH(ieee80211_rx_h_mgmt)
+		CALL_RXH(ieee80211_rx_h_data)
+
+		/* special treatment -- needs the queue */
+		res = ieee80211_rx_h_ctrl(rx, &reorder_release);
+		if (res != RX_CONTINUE)
+			goto rxh_next;
+
+		CALL_RXH(ieee80211_rx_h_action)
+		CALL_RXH(ieee80211_rx_h_mgmt)
 
 #undef CALL_RXH
 
- rxh_done:
-	switch (res) {
-	case RX_DROP_MONITOR:
-		I802_DEBUG_INC(sdata->local->rx_handlers_drop);
-		if (rx->sta)
-			rx->sta->rx_dropped++;
-		/* fall through */
-	case RX_CONTINUE:
-		ieee80211_rx_cooked_monitor(rx);
-		break;
-	case RX_DROP_UNUSABLE:
-		I802_DEBUG_INC(sdata->local->rx_handlers_drop);
-		if (rx->sta)
-			rx->sta->rx_dropped++;
-		dev_kfree_skb(rx->skb);
-		break;
-	case RX_QUEUED:
-		I802_DEBUG_INC(sdata->local->rx_handlers_queued);
-		break;
+ rxh_next:
+		switch (res) {
+		case RX_DROP_MONITOR:
+			I802_DEBUG_INC(sdata->local->rx_handlers_drop);
+			if (rx->sta)
+				rx->sta->rx_dropped++;
+			/* fall through */
+		case RX_CONTINUE:
+			ieee80211_rx_cooked_monitor(rx, rate);
+			break;
+		case RX_DROP_UNUSABLE:
+			I802_DEBUG_INC(sdata->local->rx_handlers_drop);
+			if (rx->sta)
+				rx->sta->rx_dropped++;
+			dev_kfree_skb(rx->skb);
+			break;
+		case RX_QUEUED:
+			I802_DEBUG_INC(sdata->local->rx_handlers_queued);
+			break;
+		}
 	}
 }
 
@@ -2034,12 +2265,14 @@
 				struct ieee80211_rx_data *rx,
 				struct ieee80211_hdr *hdr)
 {
-	u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len, sdata->vif.type);
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	u8 *bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type);
 	int multicast = is_multicast_ether_addr(hdr->addr1);
 
 	switch (sdata->vif.type) {
 	case NL80211_IFTYPE_STATION:
-		if (!bssid)
+		if (!bssid && !sdata->u.mgd.use_4addr)
 			return 0;
 		if (!multicast &&
 		    compare_ether_addr(sdata->dev->dev_addr, hdr->addr1) != 0) {
@@ -2066,10 +2299,10 @@
 			rx->flags &= ~IEEE80211_RX_RA_MATCH;
 		} else if (!rx->sta) {
 			int rate_idx;
-			if (rx->status->flag & RX_FLAG_HT)
+			if (status->flag & RX_FLAG_HT)
 				rate_idx = 0; /* TODO: HT rates */
 			else
-				rate_idx = rx->status->rate_idx;
+				rate_idx = status->rate_idx;
 			rx->sta = ieee80211_ibss_add_sta(sdata, bssid, hdr->addr2,
 				BIT(rate_idx));
 		}
@@ -2104,8 +2337,6 @@
 			return 0;
 		break;
 	case NL80211_IFTYPE_MONITOR:
-		/* take everything */
-		break;
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case __NL80211_IFTYPE_AFTER_LAST:
 		/* should never get here */
@@ -2138,23 +2369,9 @@
 	rx.skb = skb;
 	rx.local = local;
 
-	rx.status = status;
-	rx.rate = rate;
-
 	if (ieee80211_is_data(hdr->frame_control) || ieee80211_is_mgmt(hdr->frame_control))
 		local->dot11ReceivedFragmentCount++;
 
-	rx.sta = sta_info_get(local, hdr->addr2);
-	if (rx.sta) {
-		rx.sdata = rx.sta->sdata;
-		rx.dev = rx.sta->sdata->dev;
-	}
-
-	if ((status->flag & RX_FLAG_MMIC_ERROR)) {
-		ieee80211_rx_michael_mic_report(hdr, &rx);
-		return;
-	}
-
 	if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
 		     test_bit(SCAN_OFF_CHANNEL, &local->scanning)))
 		rx.flags |= IEEE80211_RX_IN_SCAN;
@@ -2162,13 +2379,20 @@
 	ieee80211_parse_qos(&rx);
 	ieee80211_verify_alignment(&rx);
 
-	skb = rx.skb;
+	rx.sta = sta_info_get(local, hdr->addr2);
+	if (rx.sta)
+		rx.sdata = rx.sta->sdata;
 
 	if (rx.sdata && ieee80211_is_data(hdr->frame_control)) {
 		rx.flags |= IEEE80211_RX_RA_MATCH;
 		prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
-		if (prepares)
-			prev = rx.sdata;
+		if (prepares) {
+			if (status->flag & RX_FLAG_MMIC_ERROR) {
+				if (rx.flags & IEEE80211_RX_RA_MATCH)
+					ieee80211_rx_michael_mic_report(hdr, &rx);
+			} else
+				prev = rx.sdata;
+		}
 	} else list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		if (!netif_running(sdata->dev))
 			continue;
@@ -2183,6 +2407,13 @@
 		if (!prepares)
 			continue;
 
+		if (status->flag & RX_FLAG_MMIC_ERROR) {
+			rx.sdata = sdata;
+			if (rx.flags & IEEE80211_RX_RA_MATCH)
+				ieee80211_rx_michael_mic_report(hdr, &rx);
+			continue;
+		}
+
 		/*
 		 * frame is destined for this interface, but if it's not
 		 * also for the previous one we handle that after the
@@ -2208,240 +2439,15 @@
 				       prev->dev->name);
 			continue;
 		}
-		ieee80211_invoke_rx_handlers(prev, &rx, skb_new);
+		ieee80211_invoke_rx_handlers(prev, &rx, skb_new, rate);
 		prev = sdata;
 	}
 	if (prev)
-		ieee80211_invoke_rx_handlers(prev, &rx, skb);
+		ieee80211_invoke_rx_handlers(prev, &rx, skb, rate);
 	else
 		dev_kfree_skb(skb);
 }
 
-#define SEQ_MODULO 0x1000
-#define SEQ_MASK   0xfff
-
-static inline int seq_less(u16 sq1, u16 sq2)
-{
-	return ((sq1 - sq2) & SEQ_MASK) > (SEQ_MODULO >> 1);
-}
-
-static inline u16 seq_inc(u16 sq)
-{
-	return (sq + 1) & SEQ_MASK;
-}
-
-static inline u16 seq_sub(u16 sq1, u16 sq2)
-{
-	return (sq1 - sq2) & SEQ_MASK;
-}
-
-
-static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
-					    struct tid_ampdu_rx *tid_agg_rx,
-					    int index)
-{
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_rate *rate;
-	struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
-	struct ieee80211_rx_status *status;
-
-	if (!skb)
-		goto no_frame;
-
-	status = IEEE80211_SKB_RXCB(skb);
-
-	/* release the reordered frames to stack */
-	sband = hw->wiphy->bands[status->band];
-	if (status->flag & RX_FLAG_HT)
-		rate = sband->bitrates; /* TODO: HT rates */
-	else
-		rate = &sband->bitrates[status->rate_idx];
-	__ieee80211_rx_handle_packet(hw, skb, rate);
-	tid_agg_rx->stored_mpdu_num--;
-	tid_agg_rx->reorder_buf[index] = NULL;
-
-no_frame:
-	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
-}
-
-
-/*
- * Timeout (in jiffies) for skb's that are waiting in the RX reorder buffer. If
- * the skb was added to the buffer longer than this time ago, the earlier
- * frames that have not yet been received are assumed to be lost and the skb
- * can be released for processing. This may also release other skb's from the
- * reorder buffer if there are no additional gaps between the frames.
- */
-#define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
-
-/*
- * As it function blongs to Rx path it must be called with
- * the proper rcu_read_lock protection for its flow.
- */
-static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
-					   struct tid_ampdu_rx *tid_agg_rx,
-					   struct sk_buff *skb,
-					   u16 mpdu_seq_num,
-					   int bar_req)
-{
-	u16 head_seq_num, buf_size;
-	int index;
-
-	buf_size = tid_agg_rx->buf_size;
-	head_seq_num = tid_agg_rx->head_seq_num;
-
-	/* frame with out of date sequence number */
-	if (seq_less(mpdu_seq_num, head_seq_num)) {
-		dev_kfree_skb(skb);
-		return 1;
-	}
-
-	/* if frame sequence number exceeds our buffering window size or
-	 * block Ack Request arrived - release stored frames */
-	if ((!seq_less(mpdu_seq_num, head_seq_num + buf_size)) || (bar_req)) {
-		/* new head to the ordering buffer */
-		if (bar_req)
-			head_seq_num = mpdu_seq_num;
-		else
-			head_seq_num =
-				seq_inc(seq_sub(mpdu_seq_num, buf_size));
-		/* release stored frames up to new head to stack */
-		while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
-			index = seq_sub(tid_agg_rx->head_seq_num,
-				tid_agg_rx->ssn)
-				% tid_agg_rx->buf_size;
-			ieee80211_release_reorder_frame(hw, tid_agg_rx,
-							index);
-		}
-		if (bar_req)
-			return 1;
-	}
-
-	/* now the new frame is always in the range of the reordering */
-	/* buffer window */
-	index = seq_sub(mpdu_seq_num, tid_agg_rx->ssn)
-				% tid_agg_rx->buf_size;
-	/* check if we already stored this frame */
-	if (tid_agg_rx->reorder_buf[index]) {
-		dev_kfree_skb(skb);
-		return 1;
-	}
-
-	/* if arrived mpdu is in the right order and nothing else stored */
-	/* release it immediately */
-	if (mpdu_seq_num == tid_agg_rx->head_seq_num &&
-			tid_agg_rx->stored_mpdu_num == 0) {
-		tid_agg_rx->head_seq_num =
-			seq_inc(tid_agg_rx->head_seq_num);
-		return 0;
-	}
-
-	/* put the frame in the reordering buffer */
-	tid_agg_rx->reorder_buf[index] = skb;
-	tid_agg_rx->reorder_time[index] = jiffies;
-	tid_agg_rx->stored_mpdu_num++;
-	/* release the buffer until next missing frame */
-	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
-						% tid_agg_rx->buf_size;
-	if (!tid_agg_rx->reorder_buf[index] &&
-	    tid_agg_rx->stored_mpdu_num > 1) {
-		/*
-		 * No buffers ready to be released, but check whether any
-		 * frames in the reorder buffer have timed out.
-		 */
-		int j;
-		int skipped = 1;
-		for (j = (index + 1) % tid_agg_rx->buf_size; j != index;
-		     j = (j + 1) % tid_agg_rx->buf_size) {
-			if (tid_agg_rx->reorder_buf[j] == NULL) {
-				skipped++;
-				continue;
-			}
-			if (!time_after(jiffies, tid_agg_rx->reorder_time[j] +
-					HZ / 10))
-				break;
-
-#ifdef CONFIG_MAC80211_HT_DEBUG
-			if (net_ratelimit())
-				printk(KERN_DEBUG "%s: release an RX reorder "
-				       "frame due to timeout on earlier "
-				       "frames\n",
-				       wiphy_name(hw->wiphy));
-#endif
-			ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
-
-			/*
-			 * Increment the head seq# also for the skipped slots.
-			 */
-			tid_agg_rx->head_seq_num =
-				(tid_agg_rx->head_seq_num + skipped) &
-				SEQ_MASK;
-			skipped = 0;
-		}
-	} else while (tid_agg_rx->reorder_buf[index]) {
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
-		index =	seq_sub(tid_agg_rx->head_seq_num,
-			tid_agg_rx->ssn) % tid_agg_rx->buf_size;
-	}
-	return 1;
-}
-
-static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
-				     struct sk_buff *skb)
-{
-	struct ieee80211_hw *hw = &local->hw;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	struct sta_info *sta;
-	struct tid_ampdu_rx *tid_agg_rx;
-	u16 sc;
-	u16 mpdu_seq_num;
-	u8 ret = 0;
-	int tid;
-
-	sta = sta_info_get(local, hdr->addr2);
-	if (!sta)
-		return ret;
-
-	/* filter the QoS data rx stream according to
-	 * STA/TID and check if this STA/TID is on aggregation */
-	if (!ieee80211_is_data_qos(hdr->frame_control))
-		goto end_reorder;
-
-	tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
-
-	if (sta->ampdu_mlme.tid_state_rx[tid] != HT_AGG_STATE_OPERATIONAL)
-		goto end_reorder;
-
-	tid_agg_rx = sta->ampdu_mlme.tid_rx[tid];
-
-	/* qos null data frames are excluded */
-	if (unlikely(hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_NULLFUNC)))
-		goto end_reorder;
-
-	/* new un-ordered ampdu frame - process it */
-
-	/* reset session timer */
-	if (tid_agg_rx->timeout)
-		mod_timer(&tid_agg_rx->session_timer,
-			  TU_TO_EXP_TIME(tid_agg_rx->timeout));
-
-	/* if this mpdu is fragmented - terminate rx aggregation session */
-	sc = le16_to_cpu(hdr->seq_ctrl);
-	if (sc & IEEE80211_SCTL_FRAG) {
-		ieee80211_sta_stop_rx_ba_session(sta->sdata, sta->sta.addr,
-			tid, 0, WLAN_REASON_QSTA_REQUIRE_SETUP);
-		ret = 1;
-		goto end_reorder;
-	}
-
-	/* according to mpdu sequence number deal with reordering buffer */
-	mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
-	ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb,
-						mpdu_seq_num, 0);
- end_reorder:
-	return ret;
-}
-
 /*
  * This is the receive path handler. It is called by a low level driver when an
  * 802.11 MPDU is received from the hardware.
@@ -2481,14 +2487,22 @@
 		goto drop;
 
 	if (status->flag & RX_FLAG_HT) {
-		/* rate_idx is MCS index */
-		if (WARN_ON(status->rate_idx < 0 ||
-			    status->rate_idx >= 76))
+		/*
+		 * rate_idx is MCS index, which can be [0-76] as documented on:
+		 *
+		 * http://wireless.kernel.org/en/developers/Documentation/ieee80211/802.11n
+		 *
+		 * Anything else would be some sort of driver or hardware error.
+		 * The driver should catch hardware errors.
+		 */
+		if (WARN((status->rate_idx < 0 ||
+			 status->rate_idx > 76),
+			 "Rate marked as an HT rate but passed "
+			 "status->rate_idx is not "
+			 "an MCS index [0-76]: %d (0x%02x)\n",
+			 status->rate_idx,
+			 status->rate_idx))
 			goto drop;
-		/* HT rates are not in the table - use the highest legacy rate
-		 * for now since other parts of mac80211 may not yet be fully
-		 * MCS aware. */
-		rate = &sband->bitrates[sband->n_bitrates - 1];
 	} else {
 		if (WARN_ON(status->rate_idx < 0 ||
 			    status->rate_idx >= sband->n_bitrates))
@@ -2515,20 +2529,7 @@
 		return;
 	}
 
-	/*
-	 * In theory, the block ack reordering should happen after duplicate
-	 * removal (ieee80211_rx_h_check(), which is an RX handler). As such,
-	 * the call to ieee80211_rx_reorder_ampdu() should really be moved to
-	 * happen as a new RX handler between ieee80211_rx_h_check and
-	 * ieee80211_rx_h_decrypt. This cleanup may eventually happen, but for
-	 * the time being, the call can be here since RX reorder buf processing
-	 * will implicitly skip duplicates. We could, in theory at least,
-	 * process frames that ieee80211_rx_h_passive_scan would drop (e.g.,
-	 * frames from other than operational channel), but that should not
-	 * happen in normal networks.
-	 */
-	if (!ieee80211_rx_reorder_ampdu(local, skb))
-		__ieee80211_rx_handle_packet(hw, skb, rate);
+	__ieee80211_rx_handle_packet(hw, skb, rate);
 
 	rcu_read_unlock();
 
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 71e10ca..4cf387c 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -12,8 +12,6 @@
  * published by the Free Software Foundation.
  */
 
-/* TODO: figure out how to avoid that the "current BSS" expires */
-
 #include <linux/wireless.h>
 #include <linux/if_arp.h>
 #include <linux/rtnetlink.h>
@@ -189,6 +187,39 @@
 	return RX_QUEUED;
 }
 
+/* return false if no more work */
+static bool ieee80211_prep_hw_scan(struct ieee80211_local *local)
+{
+	struct cfg80211_scan_request *req = local->scan_req;
+	enum ieee80211_band band;
+	int i, ielen, n_chans;
+
+	do {
+		if (local->hw_scan_band == IEEE80211_NUM_BANDS)
+			return false;
+
+		band = local->hw_scan_band;
+		n_chans = 0;
+		for (i = 0; i < req->n_channels; i++) {
+			if (req->channels[i]->band == band) {
+				local->hw_scan_req->channels[n_chans] =
+							req->channels[i];
+				n_chans++;
+			}
+		}
+
+		local->hw_scan_band++;
+	} while (!n_chans);
+
+	local->hw_scan_req->n_channels = n_chans;
+
+	ielen = ieee80211_build_preq_ies(local, (u8 *)local->hw_scan_req->ie,
+					 req->ie, req->ie_len, band);
+	local->hw_scan_req->ie_len = ielen;
+
+	return true;
+}
+
 /*
  * inform AP that we will go to sleep so that it will buffer the frames
  * while we scan
@@ -249,13 +280,6 @@
 	}
 }
 
-static void ieee80211_restore_scan_ies(struct ieee80211_local *local)
-{
-	kfree(local->scan_req->ie);
-	local->scan_req->ie = local->orig_ies;
-	local->scan_req->ie_len = local->orig_ies_len;
-}
-
 void ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
@@ -264,25 +288,36 @@
 
 	mutex_lock(&local->scan_mtx);
 
-	if (WARN_ON(!local->scanning)) {
-		mutex_unlock(&local->scan_mtx);
-		return;
-	}
+	/*
+	 * It's ok to abort a not-yet-running scan (that
+	 * we have one at all will be verified by checking
+	 * local->scan_req next), but not to complete it
+	 * successfully.
+	 */
+	if (WARN_ON(!local->scanning && !aborted))
+		aborted = true;
 
 	if (WARN_ON(!local->scan_req)) {
 		mutex_unlock(&local->scan_mtx);
 		return;
 	}
 
-	if (test_bit(SCAN_HW_SCANNING, &local->scanning))
-		ieee80211_restore_scan_ies(local);
+	was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
+	if (was_hw_scan && !aborted && ieee80211_prep_hw_scan(local)) {
+		ieee80211_queue_delayed_work(&local->hw,
+					     &local->scan_work, 0);
+		mutex_unlock(&local->scan_mtx);
+		return;
+	}
+
+	kfree(local->hw_scan_req);
+	local->hw_scan_req = NULL;
 
 	if (local->scan_req != local->int_scan_req)
 		cfg80211_scan_done(local->scan_req, aborted);
 	local->scan_req = NULL;
 	local->scan_sdata = NULL;
 
-	was_hw_scan = test_bit(SCAN_HW_SCANNING, &local->scanning);
 	local->scanning = 0;
 	local->scan_channel = NULL;
 
@@ -306,10 +341,10 @@
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 			if (sdata->u.mgd.associated) {
 				ieee80211_scan_ps_disable(sdata);
-				netif_tx_wake_all_queues(sdata->dev);
+				netif_wake_queue(sdata->dev);
 			}
 		} else
-			netif_tx_wake_all_queues(sdata->dev);
+			netif_wake_queue(sdata->dev);
 
 		/* re-enable beaconing */
 		if (sdata->vif.type == NL80211_IFTYPE_AP ||
@@ -364,7 +399,7 @@
 		 * are handled in the scan state machine
 		 */
 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
-			netif_tx_stop_all_queues(sdata->dev);
+			netif_stop_queue(sdata->dev);
 	}
 	mutex_unlock(&local->iflist_mtx);
 
@@ -394,19 +429,23 @@
 
 	if (local->ops->hw_scan) {
 		u8 *ies;
-		int ielen;
 
-		ies = kmalloc(2 + IEEE80211_MAX_SSID_LEN +
-			      local->scan_ies_len + req->ie_len, GFP_KERNEL);
-		if (!ies)
+		local->hw_scan_req = kmalloc(
+				sizeof(*local->hw_scan_req) +
+				req->n_channels * sizeof(req->channels[0]) +
+				2 + IEEE80211_MAX_SSID_LEN + local->scan_ies_len +
+				req->ie_len, GFP_KERNEL);
+		if (!local->hw_scan_req)
 			return -ENOMEM;
 
-		ielen = ieee80211_build_preq_ies(local, ies,
-						 req->ie, req->ie_len);
-		local->orig_ies = req->ie;
-		local->orig_ies_len = req->ie_len;
-		req->ie = ies;
-		req->ie_len = ielen;
+		local->hw_scan_req->ssids = req->ssids;
+		local->hw_scan_req->n_ssids = req->n_ssids;
+		ies = (u8 *)local->hw_scan_req +
+			sizeof(*local->hw_scan_req) +
+			req->n_channels * sizeof(req->channels[0]);
+		local->hw_scan_req->ie = ies;
+
+		local->hw_scan_band = 0;
 	}
 
 	local->scan_req = req;
@@ -438,16 +477,17 @@
 	ieee80211_recalc_idle(local);
 	mutex_unlock(&local->scan_mtx);
 
-	if (local->ops->hw_scan)
-		rc = drv_hw_scan(local, local->scan_req);
-	else
+	if (local->ops->hw_scan) {
+		WARN_ON(!ieee80211_prep_hw_scan(local));
+		rc = drv_hw_scan(local, local->hw_scan_req);
+	} else
 		rc = ieee80211_start_sw_scan(local);
 
 	mutex_lock(&local->scan_mtx);
 
 	if (rc) {
-		if (local->ops->hw_scan)
-			ieee80211_restore_scan_ies(local);
+		kfree(local->hw_scan_req);
+		local->hw_scan_req = NULL;
 		local->scanning = 0;
 
 		ieee80211_recalc_idle(local);
@@ -523,7 +563,7 @@
 			continue;
 
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-			netif_tx_stop_all_queues(sdata->dev);
+			netif_stop_queue(sdata->dev);
 			if (sdata->u.mgd.associated)
 				ieee80211_scan_ps_enable(sdata);
 		}
@@ -558,7 +598,7 @@
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 			if (sdata->u.mgd.associated)
 				ieee80211_scan_ps_disable(sdata);
-			netif_tx_wake_all_queues(sdata->dev);
+			netif_wake_queue(sdata->dev);
 		}
 	}
 	mutex_unlock(&local->iflist_mtx);
@@ -574,23 +614,14 @@
 {
 	int skip;
 	struct ieee80211_channel *chan;
-	struct ieee80211_sub_if_data *sdata = local->scan_sdata;
 
 	skip = 0;
 	chan = local->scan_req->channels[local->scan_channel_idx];
 
-	if (chan->flags & IEEE80211_CHAN_DISABLED ||
-	    (sdata->vif.type == NL80211_IFTYPE_ADHOC &&
-	     chan->flags & IEEE80211_CHAN_NO_IBSS))
+	local->scan_channel = chan;
+	if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
 		skip = 1;
 
-	if (!skip) {
-		local->scan_channel = chan;
-		if (ieee80211_hw_config(local,
-					IEEE80211_CONF_CHANGE_CHANNEL))
-			skip = 1;
-	}
-
 	/* advance state machine to next channel/band */
 	local->scan_channel_idx++;
 
@@ -656,6 +687,14 @@
 		return;
 	}
 
+	if (local->hw_scan_req) {
+		int rc = drv_hw_scan(local, local->hw_scan_req);
+		mutex_unlock(&local->scan_mtx);
+		if (rc)
+			ieee80211_scan_completed(&local->hw, true);
+		return;
+	}
+
 	if (local->scan_req && !local->scanning) {
 		struct cfg80211_scan_request *req = local->scan_req;
 		int rc;
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c
index 6895303..aa743a8 100644
--- a/net/mac80211/spectmgmt.c
+++ b/net/mac80211/spectmgmt.c
@@ -65,7 +65,7 @@
 			IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED;
 	msr_report->u.action.u.measurement.msr_elem.type = request_ie->type;
 
-	ieee80211_tx_skb(sdata, skb, 1);
+	ieee80211_tx_skb(sdata, skb);
 }
 
 void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata,
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 594f231..71f370d 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -116,14 +116,15 @@
 	return sta;
 }
 
-struct sta_info *sta_info_get_by_idx(struct ieee80211_local *local, int idx,
-				     struct net_device *dev)
+struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
+				     int idx)
 {
+	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
 	int i = 0;
 
 	list_for_each_entry_rcu(sta, &local->sta_list, list) {
-		if (dev && dev != sta->sdata->dev)
+		if (sdata != sta->sdata)
 			continue;
 		if (i < idx) {
 			++i;
@@ -147,8 +148,10 @@
 static void __sta_info_free(struct ieee80211_local *local,
 			    struct sta_info *sta)
 {
-	rate_control_free_sta(sta);
-	rate_control_put(sta->rate_ctrl);
+	if (sta->rate_ctrl) {
+		rate_control_free_sta(sta);
+		rate_control_put(sta->rate_ctrl);
+	}
 
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 	printk(KERN_DEBUG "%s: Destroyed STA %pM\n",
@@ -171,6 +174,8 @@
 
 	local = sta->local;
 
+	cancel_work_sync(&sta->drv_unblock_wk);
+
 	rate_control_remove_sta_debugfs(sta);
 	ieee80211_sta_debugfs_remove(sta);
 
@@ -259,6 +264,38 @@
 	rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], sta);
 }
 
+static void sta_unblock(struct work_struct *wk)
+{
+	struct sta_info *sta;
+
+	sta = container_of(wk, struct sta_info, drv_unblock_wk);
+
+	if (sta->dead)
+		return;
+
+	if (!test_sta_flags(sta, WLAN_STA_PS_STA))
+		ieee80211_sta_ps_deliver_wakeup(sta);
+	else if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL))
+		ieee80211_sta_ps_deliver_poll_response(sta);
+}
+
+static int sta_prepare_rate_control(struct ieee80211_local *local,
+				    struct sta_info *sta, gfp_t gfp)
+{
+	if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+		return 0;
+
+	sta->rate_ctrl = rate_control_get(local->rate_ctrl);
+	sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl,
+						     &sta->sta, gfp);
+	if (!sta->rate_ctrl_priv) {
+		rate_control_put(sta->rate_ctrl);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
 struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 				u8 *addr, gfp_t gfp)
 {
@@ -272,16 +309,13 @@
 
 	spin_lock_init(&sta->lock);
 	spin_lock_init(&sta->flaglock);
+	INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
 
 	memcpy(sta->sta.addr, addr, ETH_ALEN);
 	sta->local = local;
 	sta->sdata = sdata;
 
-	sta->rate_ctrl = rate_control_get(local->rate_ctrl);
-	sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl,
-						     &sta->sta, gfp);
-	if (!sta->rate_ctrl_priv) {
-		rate_control_put(sta->rate_ctrl);
+	if (sta_prepare_rate_control(local, sta, gfp)) {
 		kfree(sta);
 		return NULL;
 	}
@@ -478,8 +512,10 @@
 	}
 
 	list_del(&(*sta)->list);
+	(*sta)->dead = true;
 
-	if (test_and_clear_sta_flags(*sta, WLAN_STA_PS)) {
+	if (test_and_clear_sta_flags(*sta,
+				WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) {
 		BUG_ON(!sdata->bss);
 
 		atomic_dec(&sdata->bss->num_sta_ps);
@@ -489,6 +525,9 @@
 	local->num_sta--;
 	local->sta_generation++;
 
+	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+		rcu_assign_pointer(sdata->u.vlan.sta, NULL);
+
 	if (local->ops->sta_notify) {
 		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 			sdata = container_of(sdata->bss,
@@ -801,8 +840,8 @@
 		sta_info_destroy(sta);
 }
 
-struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_hw *hw,
-					 const u8 *addr)
+struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw,
+					       const u8 *addr)
 {
 	struct sta_info *sta = sta_info_get(hw_to_local(hw), addr);
 
@@ -810,4 +849,114 @@
 		return NULL;
 	return &sta->sta;
 }
+EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_hw);
+
+struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
+					 const u8 *addr)
+{
+	struct ieee80211_sub_if_data *sdata;
+
+	if (!vif)
+		return NULL;
+
+	sdata = vif_to_sdata(vif);
+
+	return ieee80211_find_sta_by_hw(&sdata->local->hw, addr);
+}
 EXPORT_SYMBOL(ieee80211_find_sta);
+
+/* powersave support code */
+void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	int sent, buffered;
+
+	drv_sta_notify(local, &sdata->vif, STA_NOTIFY_AWAKE, &sta->sta);
+
+	if (!skb_queue_empty(&sta->ps_tx_buf))
+		sta_info_clear_tim_bit(sta);
+
+	/* Send all buffered frames to the station */
+	sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered);
+	buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf);
+	sent += buffered;
+	local->total_ps_buffered -= buffered;
+
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
+	printk(KERN_DEBUG "%s: STA %pM aid %d sending %d filtered/%d PS frames "
+	       "since STA not sleeping anymore\n", sdata->dev->name,
+	       sta->sta.addr, sta->sta.aid, sent - buffered, buffered);
+#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+}
+
+void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	struct ieee80211_local *local = sdata->local;
+	struct sk_buff *skb;
+	int no_pending_pkts;
+
+	skb = skb_dequeue(&sta->tx_filtered);
+	if (!skb) {
+		skb = skb_dequeue(&sta->ps_tx_buf);
+		if (skb)
+			local->total_ps_buffered--;
+	}
+	no_pending_pkts = skb_queue_empty(&sta->tx_filtered) &&
+		skb_queue_empty(&sta->ps_tx_buf);
+
+	if (skb) {
+		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+		struct ieee80211_hdr *hdr =
+			(struct ieee80211_hdr *) skb->data;
+
+		/*
+		 * Tell TX path to send this frame even though the STA may
+		 * still remain is PS mode after this frame exchange.
+		 */
+		info->flags |= IEEE80211_TX_CTL_PSPOLL_RESPONSE;
+
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
+		printk(KERN_DEBUG "STA %pM aid %d: PS Poll (entries after %d)\n",
+		       sta->sta.addr, sta->sta.aid,
+		       skb_queue_len(&sta->ps_tx_buf));
+#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+
+		/* Use MoreData flag to indicate whether there are more
+		 * buffered frames for this STA */
+		if (no_pending_pkts)
+			hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_MOREDATA);
+		else
+			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_MOREDATA);
+
+		ieee80211_add_pending_skb(local, skb);
+
+		if (no_pending_pkts)
+			sta_info_clear_tim_bit(sta);
+#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
+	} else {
+		/*
+		 * FIXME: This can be the result of a race condition between
+		 *	  us expiring a frame and the station polling for it.
+		 *	  Should we send it a null-func frame indicating we
+		 *	  have nothing buffered for it?
+		 */
+		printk(KERN_DEBUG "%s: STA %pM sent PS Poll even "
+		       "though there are no buffered frames for it\n",
+		       sdata->dev->name, sta->sta.addr);
+#endif /* CONFIG_MAC80211_VERBOSE_PS_DEBUG */
+	}
+}
+
+void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
+			       struct ieee80211_sta *pubsta, bool block)
+{
+	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
+
+	if (block)
+		set_sta_flags(sta, WLAN_STA_PS_DRIVER);
+	else
+		ieee80211_queue_work(hw, &sta->drv_unblock_wk);
+}
+EXPORT_SYMBOL(ieee80211_sta_block_awake);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index ccc3adf..b4810f6 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -12,6 +12,7 @@
 #include <linux/list.h>
 #include <linux/types.h>
 #include <linux/if_ether.h>
+#include <linux/workqueue.h>
 #include "key.h"
 
 /**
@@ -21,7 +22,7 @@
  *
  * @WLAN_STA_AUTH: Station is authenticated.
  * @WLAN_STA_ASSOC: Station is associated.
- * @WLAN_STA_PS: Station is in power-save mode
+ * @WLAN_STA_PS_STA: Station is in power-save mode
  * @WLAN_STA_AUTHORIZED: Station is authorized to send/receive traffic.
  *	This bit is always checked so needs to be enabled for all stations
  *	when virtual port control is not in use.
@@ -36,11 +37,16 @@
  * @WLAN_STA_MFP: Management frame protection is used with this STA.
  * @WLAN_STA_SUSPEND: Set/cleared during a suspend/resume cycle.
  *	Used to deny ADDBA requests (both TX and RX).
+ * @WLAN_STA_PS_DRIVER: driver requires keeping this station in
+ *	power-save mode logically to flush frames that might still
+ *	be in the queues
+ * @WLAN_STA_PSPOLL: Station sent PS-poll while driver was keeping
+ *	station in power-save mode, reply when the driver unblocks.
  */
 enum ieee80211_sta_info_flags {
 	WLAN_STA_AUTH		= 1<<0,
 	WLAN_STA_ASSOC		= 1<<1,
-	WLAN_STA_PS		= 1<<2,
+	WLAN_STA_PS_STA		= 1<<2,
 	WLAN_STA_AUTHORIZED	= 1<<3,
 	WLAN_STA_SHORT_PREAMBLE	= 1<<4,
 	WLAN_STA_ASSOC_AP	= 1<<5,
@@ -48,7 +54,9 @@
 	WLAN_STA_WDS		= 1<<7,
 	WLAN_STA_CLEAR_PS_FILT	= 1<<9,
 	WLAN_STA_MFP		= 1<<10,
-	WLAN_STA_SUSPEND	= 1<<11
+	WLAN_STA_SUSPEND	= 1<<11,
+	WLAN_STA_PS_DRIVER	= 1<<12,
+	WLAN_STA_PSPOLL		= 1<<13,
 };
 
 #define STA_TID_NUM 16
@@ -177,6 +185,7 @@
  * @lock: used for locking all fields that require locking, see comments
  *	in the header file.
  * @flaglock: spinlock for flags accesses
+ * @drv_unblock_wk: used for driver PS unblocking
  * @listen_interval: listen interval of this station, when we're acting as AP
  * @pin_status: used internally for pinning a STA struct into memory
  * @flags: STA flags, see &enum ieee80211_sta_info_flags
@@ -193,7 +202,6 @@
  * @rx_fragments: number of received MPDUs
  * @rx_dropped: number of dropped MPDUs from this STA
  * @last_signal: signal of last received frame from this STA
- * @last_qual: qual of last received frame from this STA
  * @last_noise: noise of last received frame from this STA
  * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  * @tx_filtered_count: number of frames the hardware filtered for this STA
@@ -217,6 +225,7 @@
  * @plink_timer_was_running: used by suspend/resume to restore timers
  * @debugfs: debug filesystem info
  * @sta: station information we share with the driver
+ * @dead: set to true when sta is unlinked
  */
 struct sta_info {
 	/* General information, mostly static */
@@ -230,8 +239,12 @@
 	spinlock_t lock;
 	spinlock_t flaglock;
 
+	struct work_struct drv_unblock_wk;
+
 	u16 listen_interval;
 
+	bool dead;
+
 	/*
 	 * for use by the internal lifetime management,
 	 * see __sta_info_unlink
@@ -259,7 +272,6 @@
 	unsigned long rx_fragments;
 	unsigned long rx_dropped;
 	int last_signal;
-	int last_qual;
 	int last_noise;
 	__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
 
@@ -301,28 +313,6 @@
 #ifdef CONFIG_MAC80211_DEBUGFS
 	struct sta_info_debugfsdentries {
 		struct dentry *dir;
-		struct dentry *flags;
-		struct dentry *num_ps_buf_frames;
-		struct dentry *inactive_ms;
-		struct dentry *last_seq_ctrl;
-		struct dentry *agg_status;
-		struct dentry *aid;
-		struct dentry *dev;
-		struct dentry *rx_packets;
-		struct dentry *tx_packets;
-		struct dentry *rx_bytes;
-		struct dentry *tx_bytes;
-		struct dentry *rx_duplicates;
-		struct dentry *rx_fragments;
-		struct dentry *rx_dropped;
-		struct dentry *tx_fragments;
-		struct dentry *tx_filtered;
-		struct dentry *tx_retry_failed;
-		struct dentry *tx_retry_count;
-		struct dentry *last_signal;
-		struct dentry *last_qual;
-		struct dentry *last_noise;
-		struct dentry *wep_weak_iv_count;
 		bool add_has_run;
 	} debugfs;
 #endif
@@ -419,8 +409,8 @@
 /*
  * Get STA info by index, BROKEN!
  */
-struct sta_info *sta_info_get_by_idx(struct ieee80211_local *local, int idx,
-				      struct net_device *dev);
+struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
+				     int idx);
 /*
  * Create a new STA info, caller owns returned structure
  * until sta_info_insert().
@@ -454,4 +444,7 @@
 void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata,
 			  unsigned long exp_time);
 
+void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta);
+void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta);
+
 #endif /* STA_INFO_H */
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
new file mode 100644
index 0000000..d78f36c
--- /dev/null
+++ b/net/mac80211/status.c
@@ -0,0 +1,341 @@
+/*
+ * Copyright 2002-2005, Instant802 Networks, Inc.
+ * Copyright 2005-2006, Devicescape Software, Inc.
+ * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
+ * Copyright 2008-2009	Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <net/mac80211.h>
+#include "ieee80211_i.h"
+#include "rate.h"
+#include "mesh.h"
+#include "led.h"
+
+
+void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
+				 struct sk_buff *skb)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	int tmp;
+
+	skb->pkt_type = IEEE80211_TX_STATUS_MSG;
+	skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
+		       &local->skb_queue : &local->skb_queue_unreliable, skb);
+	tmp = skb_queue_len(&local->skb_queue) +
+		skb_queue_len(&local->skb_queue_unreliable);
+	while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
+	       (skb = skb_dequeue(&local->skb_queue_unreliable))) {
+		dev_kfree_skb_irq(skb);
+		tmp--;
+		I802_DEBUG_INC(local->tx_status_drop);
+	}
+	tasklet_schedule(&local->tasklet);
+}
+EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
+
+static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
+					    struct sta_info *sta,
+					    struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+
+	/*
+	 * XXX: This is temporary!
+	 *
+	 *	The problem here is that when we get here, the driver will
+	 *	quite likely have pretty much overwritten info->control by
+	 *	using info->driver_data or info->rate_driver_data. Thus,
+	 *	when passing out the frame to the driver again, we would be
+	 *	passing completely bogus data since the driver would then
+	 *	expect a properly filled info->control. In mac80211 itself
+	 *	the same problem occurs, since we need info->control.vif
+	 *	internally.
+	 *
+	 *	To fix this, we should send the frame through TX processing
+	 *	again. However, it's not that simple, since the frame will
+	 *	have been software-encrypted (if applicable) already, and
+	 *	encrypting it again doesn't do much good. So to properly do
+	 *	that, we not only have to skip the actual 'raw' encryption
+	 *	(key selection etc. still has to be done!) but also the
+	 *	sequence number assignment since that impacts the crypto
+	 *	encapsulation, of course.
+	 *
+	 *	Hence, for now, fix the bug by just dropping the frame.
+	 */
+	goto drop;
+
+	sta->tx_filtered_count++;
+
+	/*
+	 * Clear the TX filter mask for this STA when sending the next
+	 * packet. If the STA went to power save mode, this will happen
+	 * when it wakes up for the next time.
+	 */
+	set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
+
+	/*
+	 * This code races in the following way:
+	 *
+	 *  (1) STA sends frame indicating it will go to sleep and does so
+	 *  (2) hardware/firmware adds STA to filter list, passes frame up
+	 *  (3) hardware/firmware processes TX fifo and suppresses a frame
+	 *  (4) we get TX status before having processed the frame and
+	 *	knowing that the STA has gone to sleep.
+	 *
+	 * This is actually quite unlikely even when both those events are
+	 * processed from interrupts coming in quickly after one another or
+	 * even at the same time because we queue both TX status events and
+	 * RX frames to be processed by a tasklet and process them in the
+	 * same order that they were received or TX status last. Hence, there
+	 * is no race as long as the frame RX is processed before the next TX
+	 * status, which drivers can ensure, see below.
+	 *
+	 * Note that this can only happen if the hardware or firmware can
+	 * actually add STAs to the filter list, if this is done by the
+	 * driver in response to set_tim() (which will only reduce the race
+	 * this whole filtering tries to solve, not completely solve it)
+	 * this situation cannot happen.
+	 *
+	 * To completely solve this race drivers need to make sure that they
+	 *  (a) don't mix the irq-safe/not irq-safe TX status/RX processing
+	 *	functions and
+	 *  (b) always process RX events before TX status events if ordering
+	 *      can be unknown, for example with different interrupt status
+	 *	bits.
+	 */
+	if (test_sta_flags(sta, WLAN_STA_PS_STA) &&
+	    skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
+		skb_queue_tail(&sta->tx_filtered, skb);
+		return;
+	}
+
+	if (!test_sta_flags(sta, WLAN_STA_PS_STA) &&
+	    !(info->flags & IEEE80211_TX_INTFL_RETRIED)) {
+		/* Software retry the packet once */
+		info->flags |= IEEE80211_TX_INTFL_RETRIED;
+		ieee80211_add_pending_skb(local, skb);
+		return;
+	}
+
+ drop:
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+	if (net_ratelimit())
+		printk(KERN_DEBUG "%s: dropped TX filtered frame, "
+		       "queue_len=%d PS=%d @%lu\n",
+		       wiphy_name(local->hw.wiphy),
+		       skb_queue_len(&sta->tx_filtered),
+		       !!test_sta_flags(sta, WLAN_STA_PS_STA), jiffies);
+#endif
+	dev_kfree_skb(skb);
+}
+
+void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct sk_buff *skb2;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	u16 frag, type;
+	__le16 fc;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_tx_status_rtap_hdr *rthdr;
+	struct ieee80211_sub_if_data *sdata;
+	struct net_device *prev_dev = NULL;
+	struct sta_info *sta;
+	int retry_count = -1, i;
+	bool injected;
+
+	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
+		/* the HW cannot have attempted that rate */
+		if (i >= hw->max_rates) {
+			info->status.rates[i].idx = -1;
+			info->status.rates[i].count = 0;
+		}
+
+		retry_count += info->status.rates[i].count;
+	}
+	if (retry_count < 0)
+		retry_count = 0;
+
+	rcu_read_lock();
+
+	sband = local->hw.wiphy->bands[info->band];
+
+	sta = sta_info_get(local, hdr->addr1);
+
+	if (sta) {
+		if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
+		    test_sta_flags(sta, WLAN_STA_PS_STA)) {
+			/*
+			 * The STA is in power save mode, so assume
+			 * that this TX packet failed because of that.
+			 */
+			ieee80211_handle_filtered_frame(local, sta, skb);
+			rcu_read_unlock();
+			return;
+		}
+
+		fc = hdr->frame_control;
+
+		if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
+		    (ieee80211_is_data_qos(fc))) {
+			u16 tid, ssn;
+			u8 *qc;
+
+			qc = ieee80211_get_qos_ctl(hdr);
+			tid = qc[0] & 0xf;
+			ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
+						& IEEE80211_SCTL_SEQ);
+			ieee80211_send_bar(sta->sdata, hdr->addr1,
+					   tid, ssn);
+		}
+
+		if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
+			ieee80211_handle_filtered_frame(local, sta, skb);
+			rcu_read_unlock();
+			return;
+		} else {
+			if (!(info->flags & IEEE80211_TX_STAT_ACK))
+				sta->tx_retry_failed++;
+			sta->tx_retry_count += retry_count;
+		}
+
+		rate_control_tx_status(local, sband, sta, skb);
+		if (ieee80211_vif_is_mesh(&sta->sdata->vif))
+			ieee80211s_update_metric(local, sta, skb);
+	}
+
+	rcu_read_unlock();
+
+	ieee80211_led_tx(local, 0);
+
+	/* SNMP counters
+	 * Fragments are passed to low-level drivers as separate skbs, so these
+	 * are actually fragments, not frames. Update frame counters only for
+	 * the first fragment of the frame. */
+
+	frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
+	type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
+
+	if (info->flags & IEEE80211_TX_STAT_ACK) {
+		if (frag == 0) {
+			local->dot11TransmittedFrameCount++;
+			if (is_multicast_ether_addr(hdr->addr1))
+				local->dot11MulticastTransmittedFrameCount++;
+			if (retry_count > 0)
+				local->dot11RetryCount++;
+			if (retry_count > 1)
+				local->dot11MultipleRetryCount++;
+		}
+
+		/* This counter shall be incremented for an acknowledged MPDU
+		 * with an individual address in the address 1 field or an MPDU
+		 * with a multicast address in the address 1 field of type Data
+		 * or Management. */
+		if (!is_multicast_ether_addr(hdr->addr1) ||
+		    type == IEEE80211_FTYPE_DATA ||
+		    type == IEEE80211_FTYPE_MGMT)
+			local->dot11TransmittedFragmentCount++;
+	} else {
+		if (frag == 0)
+			local->dot11FailedCount++;
+	}
+
+	/* this was a transmitted frame, but now we want to reuse it */
+	skb_orphan(skb);
+
+	/*
+	 * This is a bit racy but we can avoid a lot of work
+	 * with this test...
+	 */
+	if (!local->monitors && !local->cooked_mntrs) {
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	/* send frame to monitor interfaces now */
+
+	if (skb_headroom(skb) < sizeof(*rthdr)) {
+		printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	rthdr = (struct ieee80211_tx_status_rtap_hdr *)
+				skb_push(skb, sizeof(*rthdr));
+
+	memset(rthdr, 0, sizeof(*rthdr));
+	rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
+	rthdr->hdr.it_present =
+		cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
+			    (1 << IEEE80211_RADIOTAP_DATA_RETRIES) |
+			    (1 << IEEE80211_RADIOTAP_RATE));
+
+	if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
+	    !is_multicast_ether_addr(hdr->addr1))
+		rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
+
+	/*
+	 * XXX: Once radiotap gets the bitmap reset thing the vendor
+	 *	extensions proposal contains, we can actually report
+	 *	the whole set of tries we did.
+	 */
+	if ((info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) ||
+	    (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT))
+		rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
+	else if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS)
+		rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
+	if (info->status.rates[0].idx >= 0 &&
+	    !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS))
+		rthdr->rate = sband->bitrates[
+				info->status.rates[0].idx].bitrate / 5;
+
+	/* for now report the total retry_count */
+	rthdr->data_retries = retry_count;
+
+	/* Need to make a copy before skb->cb gets cleared */
+	injected = !!(info->flags & IEEE80211_TX_CTL_INJECTED);
+
+	/* XXX: is this sufficient for BPF? */
+	skb_set_mac_header(skb, 0);
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb->pkt_type = PACKET_OTHERHOST;
+	skb->protocol = htons(ETH_P_802_2);
+	memset(skb->cb, 0, sizeof(skb->cb));
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
+			if (!netif_running(sdata->dev))
+				continue;
+
+			if ((sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) &&
+			    !injected &&
+			    (type == IEEE80211_FTYPE_DATA))
+				continue;
+
+			if (prev_dev) {
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (skb2) {
+					skb2->dev = prev_dev;
+					netif_rx(skb2);
+				}
+			}
+
+			prev_dev = sdata->dev;
+		}
+	}
+	if (prev_dev) {
+		skb->dev = prev_dev;
+		netif_rx(skb);
+		skb = NULL;
+	}
+	rcu_read_unlock();
+	dev_kfree_skb(skb);
+}
+EXPORT_SYMBOL(ieee80211_tx_status);
diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c
index 964b7fa..4921d72 100644
--- a/net/mac80211/tkip.c
+++ b/net/mac80211/tkip.c
@@ -301,9 +301,9 @@
 #endif
 		if (key->local->ops->update_tkip_key &&
 			key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) {
-			u8 bcast[ETH_ALEN] =
+			static const u8 bcast[ETH_ALEN] =
 				{0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-			u8 *sta_addr = key->sta->sta.addr;
+			const u8 *sta_addr = key->sta->sta.addr;
 
 			if (is_multicast_ether_addr(ra))
 				sta_addr = bcast;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index eaa4118..8834cc9 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -317,12 +317,11 @@
 	if (!atomic_read(&tx->sdata->bss->num_sta_ps))
 		return TX_CONTINUE;
 
-	/* buffered in hardware */
-	if (!(tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING)) {
-		info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
+	info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM;
 
+	/* device releases frame after DTIM beacon */
+	if (!(tx->local->hw.flags & IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING))
 		return TX_CONTINUE;
-	}
 
 	/* buffered in mac80211 */
 	if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
@@ -367,15 +366,16 @@
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
 	u32 staflags;
 
-	if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)
-			|| ieee80211_is_auth(hdr->frame_control)
-			|| ieee80211_is_assoc_resp(hdr->frame_control)
-			|| ieee80211_is_reassoc_resp(hdr->frame_control)))
+	if (unlikely(!sta ||
+		     ieee80211_is_probe_resp(hdr->frame_control) ||
+		     ieee80211_is_auth(hdr->frame_control) ||
+		     ieee80211_is_assoc_resp(hdr->frame_control) ||
+		     ieee80211_is_reassoc_resp(hdr->frame_control)))
 		return TX_CONTINUE;
 
 	staflags = get_sta_flags(sta);
 
-	if (unlikely((staflags & WLAN_STA_PS) &&
+	if (unlikely((staflags & (WLAN_STA_PS_STA | WLAN_STA_PS_DRIVER)) &&
 		     !(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE))) {
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 		printk(KERN_DEBUG "STA %pM aid %d: PS buffer (entries "
@@ -398,8 +398,13 @@
 		} else
 			tx->local->total_ps_buffered++;
 
-		/* Queue frame to be sent after STA sends an PS Poll frame */
-		if (skb_queue_empty(&sta->ps_tx_buf))
+		/*
+		 * Queue frame to be sent after STA wakes up/polls,
+		 * but don't set the TIM bit if the driver is blocking
+		 * wakeup or poll response transmissions anyway.
+		 */
+		if (skb_queue_empty(&sta->ps_tx_buf) &&
+		    !(staflags & WLAN_STA_PS_DRIVER))
 			sta_info_set_tim_bit(sta);
 
 		info->control.jiffies = jiffies;
@@ -409,7 +414,7 @@
 		return TX_QUEUED;
 	}
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
-	else if (unlikely(test_sta_flags(sta, WLAN_STA_PS))) {
+	else if (unlikely(staflags & WLAN_STA_PS_STA)) {
 		printk(KERN_DEBUG "%s: STA %pM in PS mode, but pspoll "
 		       "set -> send frame\n", tx->dev->name,
 		       sta->sta.addr);
@@ -1047,7 +1052,10 @@
 
 	hdr = (struct ieee80211_hdr *) skb->data;
 
-	tx->sta = sta_info_get(local, hdr->addr1);
+	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+		tx->sta = rcu_dereference(sdata->u.vlan.sta);
+	if (!tx->sta)
+		tx->sta = sta_info_get(local, hdr->addr1);
 
 	if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) &&
 	    (local->hw.flags & IEEE80211_HW_AMPDU_AGGREGATION)) {
@@ -1201,23 +1209,26 @@
 	struct sk_buff *skb = tx->skb;
 	ieee80211_tx_result res = TX_DROP;
 
-#define CALL_TXH(txh)		\
-	res = txh(tx);		\
-	if (res != TX_CONTINUE)	\
-		goto txh_done;
+#define CALL_TXH(txh) \
+	do {				\
+		res = txh(tx);		\
+		if (res != TX_CONTINUE)	\
+			goto txh_done;	\
+	} while (0)
 
-	CALL_TXH(ieee80211_tx_h_check_assoc)
-	CALL_TXH(ieee80211_tx_h_ps_buf)
-	CALL_TXH(ieee80211_tx_h_select_key)
-	CALL_TXH(ieee80211_tx_h_michael_mic_add)
-	CALL_TXH(ieee80211_tx_h_rate_ctrl)
-	CALL_TXH(ieee80211_tx_h_misc)
-	CALL_TXH(ieee80211_tx_h_sequence)
-	CALL_TXH(ieee80211_tx_h_fragment)
+	CALL_TXH(ieee80211_tx_h_check_assoc);
+	CALL_TXH(ieee80211_tx_h_ps_buf);
+	CALL_TXH(ieee80211_tx_h_select_key);
+	CALL_TXH(ieee80211_tx_h_michael_mic_add);
+	if (!(tx->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL))
+		CALL_TXH(ieee80211_tx_h_rate_ctrl);
+	CALL_TXH(ieee80211_tx_h_misc);
+	CALL_TXH(ieee80211_tx_h_sequence);
+	CALL_TXH(ieee80211_tx_h_fragment);
 	/* handlers after fragment must be aware of tx info fragmentation! */
-	CALL_TXH(ieee80211_tx_h_stats)
-	CALL_TXH(ieee80211_tx_h_encrypt)
-	CALL_TXH(ieee80211_tx_h_calculate_duration)
+	CALL_TXH(ieee80211_tx_h_stats);
+	CALL_TXH(ieee80211_tx_h_encrypt);
+	CALL_TXH(ieee80211_tx_h_calculate_duration);
 #undef CALL_TXH
 
  txh_done:
@@ -1387,6 +1398,30 @@
 	return 0;
 }
 
+static bool need_dynamic_ps(struct ieee80211_local *local)
+{
+	/* driver doesn't support power save */
+	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
+		return false;
+
+	/* hardware does dynamic power save */
+	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
+		return false;
+
+	/* dynamic power save disabled */
+	if (local->hw.conf.dynamic_ps_timeout <= 0)
+		return false;
+
+	/* we are scanning, don't enable power save */
+	if (local->scanning)
+		return false;
+
+	if (!local->ps_sdata)
+		return false;
+
+	return true;
+}
+
 static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
 			   struct sk_buff *skb)
 {
@@ -1397,11 +1432,7 @@
 	int headroom;
 	bool may_encrypt;
 
-	dev_hold(sdata->dev);
-
-	if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
-	    local->hw.conf.dynamic_ps_timeout > 0 &&
-	    !(local->scanning) && local->ps_sdata) {
+	if (need_dynamic_ps(local)) {
 		if (local->hw.conf.flags & IEEE80211_CONF_PS) {
 			ieee80211_stop_queues_by_reason(&local->hw,
 					IEEE80211_QUEUE_STOP_REASON_PS);
@@ -1413,7 +1444,7 @@
 		        msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
 	}
 
-	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+	rcu_read_lock();
 
 	if (unlikely(sdata->vif.type == NL80211_IFTYPE_MONITOR)) {
 		int hdrlen;
@@ -1437,7 +1468,6 @@
 			 * support we will need a different mechanism.
 			 */
 
-			rcu_read_lock();
 			list_for_each_entry_rcu(tmp_sdata, &local->interfaces,
 						list) {
 				if (!netif_running(tmp_sdata->dev))
@@ -1446,13 +1476,10 @@
 					continue;
 				if (compare_ether_addr(tmp_sdata->dev->dev_addr,
 						       hdr->addr2) == 0) {
-					dev_hold(tmp_sdata->dev);
-					dev_put(sdata->dev);
 					sdata = tmp_sdata;
 					break;
 				}
 			}
-			rcu_read_unlock();
 		}
 	}
 
@@ -1466,7 +1493,7 @@
 
 	if (ieee80211_skb_resize(local, skb, headroom, may_encrypt)) {
 		dev_kfree_skb(skb);
-		dev_put(sdata->dev);
+		rcu_read_unlock();
 		return;
 	}
 
@@ -1477,13 +1504,13 @@
 		!is_multicast_ether_addr(hdr->addr1))
 			if (mesh_nexthop_lookup(skb, sdata)) {
 				/* skb queued: don't free */
-				dev_put(sdata->dev);
+				rcu_read_unlock();
 				return;
 			}
 
 	ieee80211_select_queue(local, skb);
 	ieee80211_tx(sdata, skb, false);
-	dev_put(sdata->dev);
+	rcu_read_unlock();
 }
 
 netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
@@ -1547,6 +1574,8 @@
 
 	memset(info, 0, sizeof(*info));
 
+	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
+
 	/* pass the radiotap header up to xmit */
 	ieee80211_xmit(IEEE80211_DEV_TO_SUB_IF(dev), skb);
 	return NETDEV_TX_OK;
@@ -1585,7 +1614,7 @@
 	const u8 *encaps_data;
 	int encaps_len, skip_header_bytes;
 	int nh_pos, h_pos;
-	struct sta_info *sta;
+	struct sta_info *sta = NULL;
 	u32 sta_flags = 0;
 
 	if (unlikely(skb->len < ETH_HLEN)) {
@@ -1602,8 +1631,24 @@
 	fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA);
 
 	switch (sdata->vif.type) {
-	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
+		rcu_read_lock();
+		sta = rcu_dereference(sdata->u.vlan.sta);
+		if (sta) {
+			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
+			/* RA TA DA SA */
+			memcpy(hdr.addr1, sta->sta.addr, ETH_ALEN);
+			memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
+			memcpy(hdr.addr3, skb->data, ETH_ALEN);
+			memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
+			hdrlen = 30;
+			sta_flags = get_sta_flags(sta);
+		}
+		rcu_read_unlock();
+		if (sta)
+			break;
+		/* fall through */
+	case NL80211_IFTYPE_AP:
 		fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
 		/* DA BSSID SA */
 		memcpy(hdr.addr1, skb->data, ETH_ALEN);
@@ -1639,21 +1684,25 @@
 			/* packet from other interface */
 			struct mesh_path *mppath;
 			int is_mesh_mcast = 1;
-			char *mesh_da;
+			const u8 *mesh_da;
 
 			rcu_read_lock();
 			if (is_multicast_ether_addr(skb->data))
 				/* DA TA mSA AE:SA */
 				mesh_da = skb->data;
 			else {
+				static const u8 bcast[ETH_ALEN] =
+					{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
 				mppath = mpp_path_lookup(skb->data, sdata);
 				if (mppath) {
 					/* RA TA mDA mSA AE:DA SA */
 					mesh_da = mppath->mpp;
 					is_mesh_mcast = 0;
-				} else
+				} else {
 					/* DA TA mSA AE:SA */
-					mesh_da = dev->broadcast;
+					mesh_da = bcast;
+				}
 			}
 			hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
 					mesh_da, dev->dev_addr);
@@ -1677,12 +1726,21 @@
 		break;
 #endif
 	case NL80211_IFTYPE_STATION:
-		fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
-		/* BSSID SA DA */
 		memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN);
-		memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
-		memcpy(hdr.addr3, skb->data, ETH_ALEN);
-		hdrlen = 24;
+		if (sdata->u.mgd.use_4addr && ethertype != ETH_P_PAE) {
+			fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
+			/* RA TA DA SA */
+			memcpy(hdr.addr2, dev->dev_addr, ETH_ALEN);
+			memcpy(hdr.addr3, skb->data, ETH_ALEN);
+			memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN);
+			hdrlen = 30;
+		} else {
+			fc |= cpu_to_le16(IEEE80211_FCTL_TODS);
+			/* BSSID SA DA */
+			memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN);
+			memcpy(hdr.addr3, skb->data, ETH_ALEN);
+			hdrlen = 24;
+		}
 		break;
 	case NL80211_IFTYPE_ADHOC:
 		/* DA SA BSSID */
@@ -1907,12 +1965,10 @@
 			}
 
 			sdata = vif_to_sdata(info->control.vif);
-			dev_hold(sdata->dev);
 			spin_unlock_irqrestore(&local->queue_stop_reason_lock,
 						flags);
 
 			txok = ieee80211_tx_pending_skb(local, skb);
-			dev_put(sdata->dev);
 			if (!txok)
 				__skb_queue_head(&local->pending[i], skb);
 			spin_lock_irqsave(&local->queue_stop_reason_lock,
@@ -1990,8 +2046,9 @@
 	}
 }
 
-struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif)
+struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 u16 *tim_offset, u16 *tim_length)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct sk_buff *skb = NULL;
@@ -2008,6 +2065,11 @@
 
 	sdata = vif_to_sdata(vif);
 
+	if (tim_offset)
+		*tim_offset = 0;
+	if (tim_length)
+		*tim_length = 0;
+
 	if (sdata->vif.type == NL80211_IFTYPE_AP) {
 		ap = &sdata->u.ap;
 		beacon = rcu_dereference(ap->beacon);
@@ -2043,6 +2105,11 @@
 				spin_unlock_irqrestore(&local->sta_lock, flags);
 			}
 
+			if (tim_offset)
+				*tim_offset = beacon->head_len;
+			if (tim_length)
+				*tim_length = skb->len - beacon->head_len;
+
 			if (beacon->tail)
 				memcpy(skb_put(skb, beacon->tail_len),
 				       beacon->tail, beacon->tail_len);
@@ -2080,7 +2147,7 @@
 		    cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
 		memset(mgmt->da, 0xff, ETH_ALEN);
 		memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
-		/* BSSID is left zeroed, wildcard value */
+		memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
 		mgmt->u.beacon.beacon_int =
 			cpu_to_le16(sdata->vif.bss_conf.beacon_int);
 		mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
@@ -2119,7 +2186,7 @@
 	rcu_read_unlock();
 	return skb;
 }
-EXPORT_SYMBOL(ieee80211_beacon_get);
+EXPORT_SYMBOL(ieee80211_beacon_get_tim);
 
 void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       const void *frame, size_t frame_len,
@@ -2214,17 +2281,12 @@
 }
 EXPORT_SYMBOL(ieee80211_get_buffered_bc);
 
-void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
-		      int encrypt)
+void ieee80211_tx_skb(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	skb_set_mac_header(skb, 0);
 	skb_set_network_header(skb, 0);
 	skb_set_transport_header(skb, 0);
 
-	if (!encrypt)
-		info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
-
 	/*
 	 * The other path calling ieee80211_xmit is from the tasklet,
 	 * and while we can handle concurrent transmissions locking
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index aeb65b3..d09f78b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -520,9 +520,9 @@
  */
 static bool ieee80211_can_queue_work(struct ieee80211_local *local)
 {
-        if (WARN(local->suspended, "queueing ieee80211 work while "
-		 "going to suspend\n"))
-                return false;
+	if (WARN(local->suspended && !local->resuming,
+		 "queueing ieee80211 work while going to suspend\n"))
+		return false;
 
 	return true;
 }
@@ -666,8 +666,8 @@
 			elems->mesh_id_len = elen;
 			break;
 		case WLAN_EID_MESH_CONFIG:
-			elems->mesh_config = pos;
-			elems->mesh_config_len = elen;
+			if (elen >= sizeof(struct ieee80211_meshconf_ie))
+				elems->mesh_config = (void *)pos;
 			break;
 		case WLAN_EID_PEER_LINK:
 			elems->peer_link = pos;
@@ -685,6 +685,10 @@
 			elems->perr = pos;
 			elems->perr_len = elen;
 			break;
+		case WLAN_EID_RANN:
+			if (elen >= sizeof(struct ieee80211_rann_ie))
+				elems->rann = (void *)pos;
+			break;
 		case WLAN_EID_CHANNEL_SWITCH:
 			elems->ch_switch_elem = pos;
 			elems->ch_switch_elem_len = elen;
@@ -868,17 +872,19 @@
 		WARN_ON(err);
 	}
 
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
-			     const u8 *ie, size_t ie_len)
+			     const u8 *ie, size_t ie_len,
+			     enum ieee80211_band band)
 {
 	struct ieee80211_supported_band *sband;
 	u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
 	int i;
 
-	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+	sband = local->hw.wiphy->bands[band];
 
 	pos = buffer;
 
@@ -966,9 +972,11 @@
 	memcpy(pos, ssid, ssid_len);
 	pos += ssid_len;
 
-	skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len));
+	skb_put(skb, ieee80211_build_preq_ies(local, pos, ie, ie_len,
+					      local->hw.conf.channel->band));
 
-	ieee80211_tx_skb(sdata, skb, 0);
+	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+	ieee80211_tx_skb(sdata, skb);
 }
 
 u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
@@ -1025,13 +1033,9 @@
 	struct sta_info *sta;
 	unsigned long flags;
 	int res;
-	bool from_suspend = local->suspended;
 
-	/*
-	 * We're going to start the hardware, at that point
-	 * we are no longer suspended and can RX frames.
-	 */
-	local->suspended = false;
+	if (local->suspended)
+		local->resuming = true;
 
 	/* restart hardware */
 	if (local->open_count) {
@@ -1129,11 +1133,14 @@
 	 * If this is for hw restart things are still running.
 	 * We may want to change that later, however.
 	 */
-	if (!from_suspend)
+	if (!local->suspended)
 		return 0;
 
 #ifdef CONFIG_PM
+	/* first set suspended false, then resuming */
 	local->suspended = false;
+	mb();
+	local->resuming = false;
 
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		switch(sdata->vif.type) {
diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c
index 8a980f1..247123f 100644
--- a/net/mac80211/wep.c
+++ b/net/mac80211/wep.c
@@ -281,16 +281,18 @@
 ieee80211_rx_result
 ieee80211_crypto_wep_decrypt(struct ieee80211_rx_data *rx)
 {
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)rx->skb->data;
+	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 
 	if (!ieee80211_is_data(hdr->frame_control) &&
 	    !ieee80211_is_auth(hdr->frame_control))
 		return RX_CONTINUE;
 
-	if (!(rx->status->flag & RX_FLAG_DECRYPTED)) {
+	if (!(status->flag & RX_FLAG_DECRYPTED)) {
 		if (ieee80211_wep_decrypt(rx->local, rx->skb, rx->key))
 			return RX_DROP_UNUSABLE;
-	} else if (!(rx->status->flag & RX_FLAG_IV_STRIPPED)) {
+	} else if (!(status->flag & RX_FLAG_IV_STRIPPED)) {
 		ieee80211_wep_remove_iv(rx->local, rx->skb, rx->key);
 		/* remove ICV */
 		skb_trim(rx->skb, rx->skb->len - WEP_ICV_LEN);
diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c
index 7077869..5332014 100644
--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -85,16 +85,16 @@
 	u8 *data, *key = NULL, key_offset;
 	size_t data_len;
 	unsigned int hdrlen;
-	struct ieee80211_hdr *hdr;
 	u8 mic[MICHAEL_MIC_LEN];
 	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	int authenticator = 1, wpa_test = 0;
 
 	/* No way to verify the MIC if the hardware stripped it */
-	if (rx->status->flag & RX_FLAG_MMIC_STRIPPED)
+	if (status->flag & RX_FLAG_MMIC_STRIPPED)
 		return RX_CONTINUE;
 
-	hdr = (struct ieee80211_hdr *)skb->data;
 	if (!rx->key || rx->key->conf.alg != ALG_TKIP ||
 	    !ieee80211_has_protected(hdr->frame_control) ||
 	    !ieee80211_is_data_present(hdr->frame_control))
@@ -216,6 +216,7 @@
 	int hdrlen, res, hwaccel = 0, wpa_test = 0;
 	struct ieee80211_key *key = rx->key;
 	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
 
@@ -225,8 +226,8 @@
 	if (!rx->sta || skb->len - hdrlen < 12)
 		return RX_DROP_UNUSABLE;
 
-	if (rx->status->flag & RX_FLAG_DECRYPTED) {
-		if (rx->status->flag & RX_FLAG_IV_STRIPPED) {
+	if (status->flag & RX_FLAG_DECRYPTED) {
+		if (status->flag & RX_FLAG_IV_STRIPPED) {
 			/*
 			 * Hardware took care of all processing, including
 			 * replay protection, and stripped the ICV/IV so
@@ -442,6 +443,7 @@
 	int hdrlen;
 	struct ieee80211_key *key = rx->key;
 	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	u8 pn[CCMP_PN_LEN];
 	int data_len;
 
@@ -455,8 +457,8 @@
 	if (!rx->sta || data_len < 0)
 		return RX_DROP_UNUSABLE;
 
-	if ((rx->status->flag & RX_FLAG_DECRYPTED) &&
-	    (rx->status->flag & RX_FLAG_IV_STRIPPED))
+	if ((status->flag & RX_FLAG_DECRYPTED) &&
+	    (status->flag & RX_FLAG_IV_STRIPPED))
 		return RX_CONTINUE;
 
 	ccmp_hdr2pn(pn, skb->data + hdrlen);
@@ -466,7 +468,7 @@
 		return RX_DROP_UNUSABLE;
 	}
 
-	if (!(rx->status->flag & RX_FLAG_DECRYPTED)) {
+	if (!(status->flag & RX_FLAG_DECRYPTED)) {
 		/* hardware didn't decrypt/verify MIC */
 		ccmp_special_blocks(skb, pn, key->u.ccmp.rx_crypto_buf, 1);
 
@@ -563,6 +565,7 @@
 ieee80211_crypto_aes_cmac_decrypt(struct ieee80211_rx_data *rx)
 {
 	struct sk_buff *skb = rx->skb;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct ieee80211_key *key = rx->key;
 	struct ieee80211_mmie *mmie;
 	u8 aad[20], mic[8], ipn[6];
@@ -571,8 +574,8 @@
 	if (!ieee80211_is_mgmt(hdr->frame_control))
 		return RX_CONTINUE;
 
-	if ((rx->status->flag & RX_FLAG_DECRYPTED) &&
-	    (rx->status->flag & RX_FLAG_IV_STRIPPED))
+	if ((status->flag & RX_FLAG_DECRYPTED) &&
+	    (status->flag & RX_FLAG_IV_STRIPPED))
 		return RX_CONTINUE;
 
 	if (skb->len < 24 + sizeof(*mmie))
@@ -591,7 +594,7 @@
 		return RX_DROP_UNUSABLE;
 	}
 
-	if (!(rx->status->flag & RX_FLAG_DECRYPTED)) {
+	if (!(status->flag & RX_FLAG_DECRYPTED)) {
 		/* hardware didn't decrypt/verify MIC */
 		bip_aad(skb, aad);
 		ieee80211_aes_cmac(key->u.aes_cmac.tfm,
diff --git a/net/netfilter/core.c b/net/netfilter/core.c
index 5bb3473..60ec4e4 100644
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -273,8 +273,8 @@
 
 #ifdef CONFIG_SYSCTL
 struct ctl_path nf_net_netfilter_sysctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "netfilter", .ctl_name = NET_NETFILTER, },
+	{ .procname = "net", },
+	{ .procname = "netfilter", },
 	{ }
 };
 EXPORT_SYMBOL_GPL(nf_net_netfilter_sysctl_path);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 446e9bd..e55a686 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1706,12 +1706,12 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 const struct ctl_path net_vs_ctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "net", },
+	{ .procname = "ipv4", },
 	{ .procname = "vs", },
 	{ }
 };
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index c1757f3..1b9370d 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -121,7 +121,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header * sysctl_header;
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 715b57f..f7476b9 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -302,7 +302,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_table_header * sysctl_header;
diff --git a/net/netfilter/nf_conntrack_acct.c b/net/netfilter/nf_conntrack_acct.c
index 4a1d94a..018f90d 100644
--- a/net/netfilter/nf_conntrack_acct.c
+++ b/net/netfilter/nf_conntrack_acct.c
@@ -30,7 +30,6 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table acct_sysctl_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_acct",
 		.data		= &init_net.ct.sysctl_acct,
 		.maxlen		= sizeof(unsigned int),
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index b9168c1..0e98c32 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -512,11 +512,17 @@
 			cnt++;
 		}
 
-		if (ct && unlikely(nf_ct_is_dying(ct) ||
-				   !atomic_inc_not_zero(&ct->ct_general.use)))
-			ct = NULL;
-		if (ct || cnt >= NF_CT_EVICTION_RANGE)
+		if (ct != NULL) {
+			if (likely(!nf_ct_is_dying(ct) &&
+				   atomic_inc_not_zero(&ct->ct_general.use)))
+				break;
+			else
+				ct = NULL;
+		}
+
+		if (cnt >= NF_CT_EVICTION_RANGE)
 			break;
+
 		hash = (hash + 1) % nf_conntrack_htable_size;
 	}
 	rcu_read_unlock();
diff --git a/net/netfilter/nf_conntrack_ecache.c b/net/netfilter/nf_conntrack_ecache.c
index aee560b..d5a9bcd 100644
--- a/net/netfilter/nf_conntrack_ecache.c
+++ b/net/netfilter/nf_conntrack_ecache.c
@@ -151,7 +151,6 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table event_sysctl_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_events",
 		.data		= &init_net.ct.sysctl_events,
 		.maxlen		= sizeof(unsigned int),
@@ -159,7 +158,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_events_retry_timeout",
 		.data		= &init_net.ct.sysctl_events_retry_timeout,
 		.maxlen		= sizeof(unsigned int),
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index 2032dfe..fdf5d2a 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -202,9 +202,9 @@
 static inline int expect_matches(const struct nf_conntrack_expect *a,
 				 const struct nf_conntrack_expect *b)
 {
-	return a->master == b->master && a->class == b->class
-		&& nf_ct_tuple_equal(&a->tuple, &b->tuple)
-		&& nf_ct_tuple_mask_equal(&a->mask, &b->mask);
+	return a->master == b->master && a->class == b->class &&
+		nf_ct_tuple_equal(&a->tuple, &b->tuple) &&
+		nf_ct_tuple_mask_equal(&a->mask, &b->mask);
 }
 
 /* Generally a bad idea to call this: could have matched already. */
diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index 5509dd1..38ea7ef 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -243,8 +243,8 @@
 	/* Three delimiters. */
 	if (dlen <= 3) return 0;
 	delim = data[0];
-	if (isdigit(delim) || delim < 33 || delim > 126
-	    || data[1] != delim || data[2] != delim)
+	if (isdigit(delim) || delim < 33 || delim > 126 ||
+	    data[1] != delim || data[2] != delim)
 		return 0;
 
 	return get_port(data, 3, dlen, delim, &cmd->u.tcp.port);
@@ -366,8 +366,8 @@
 	typeof(nf_nat_ftp_hook) nf_nat_ftp;
 
 	/* Until there's been traffic both ways, don't look in packets. */
-	if (ctinfo != IP_CT_ESTABLISHED
-	    && ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY) {
+	if (ctinfo != IP_CT_ESTABLISHED &&
+	    ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
 		pr_debug("ftp: Conntrackinfo = %u\n", ctinfo);
 		return NF_ACCEPT;
 	}
diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c
index 1b816a2..dd37550 100644
--- a/net/netfilter/nf_conntrack_proto_dccp.c
+++ b/net/netfilter/nf_conntrack_proto_dccp.c
@@ -384,7 +384,7 @@
 };
 
 /* this module per-net specifics */
-static int dccp_net_id;
+static int dccp_net_id __read_mostly;
 struct dccp_net {
 	int dccp_loose;
 	unsigned int dccp_timeout[CT_DCCP_MAX + 1];
@@ -703,64 +703,54 @@
 /* template, data assigned later */
 static struct ctl_table dccp_sysctl_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_request",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_respond",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_partopen",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_open",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_closereq",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_closing",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_timeout_timewait",
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_dccp_loose",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{
-		.ctl_name	= 0,
-	}
+	{ }
 };
 #endif /* CONFIG_SYSCTL */
 
@@ -810,12 +800,7 @@
 
 static __net_init int dccp_net_init(struct net *net)
 {
-	struct dccp_net *dn;
-	int err;
-
-	dn = kmalloc(sizeof(*dn), GFP_KERNEL);
-	if (!dn)
-		return -ENOMEM;
+	struct dccp_net *dn = dccp_pernet(net);
 
 	/* default values */
 	dn->dccp_loose = 1;
@@ -827,16 +812,11 @@
 	dn->dccp_timeout[CT_DCCP_CLOSING]	= 64 * HZ;
 	dn->dccp_timeout[CT_DCCP_TIMEWAIT]	= 2 * DCCP_MSL;
 
-	err = net_assign_generic(net, dccp_net_id, dn);
-	if (err)
-		goto out;
-
 #ifdef CONFIG_SYSCTL
-	err = -ENOMEM;
 	dn->sysctl_table = kmemdup(dccp_sysctl_table,
 			sizeof(dccp_sysctl_table), GFP_KERNEL);
 	if (!dn->sysctl_table)
-		goto out;
+		return -ENOMEM;
 
 	dn->sysctl_table[0].data = &dn->dccp_timeout[CT_DCCP_REQUEST];
 	dn->sysctl_table[1].data = &dn->dccp_timeout[CT_DCCP_RESPOND];
@@ -851,15 +831,11 @@
 			nf_net_netfilter_sysctl_path, dn->sysctl_table);
 	if (!dn->sysctl_header) {
 		kfree(dn->sysctl_table);
-		goto out;
+		return -ENOMEM;
 	}
 #endif
 
 	return 0;
-
-out:
-	kfree(dn);
-	return err;
 }
 
 static __net_exit void dccp_net_exit(struct net *net)
@@ -869,21 +845,20 @@
 	unregister_net_sysctl_table(dn->sysctl_header);
 	kfree(dn->sysctl_table);
 #endif
-	kfree(dn);
-
-	net_assign_generic(net, dccp_net_id, NULL);
 }
 
 static struct pernet_operations dccp_net_ops = {
 	.init = dccp_net_init,
 	.exit = dccp_net_exit,
+	.id   = &dccp_net_id,
+	.size = sizeof(struct dccp_net),
 };
 
 static int __init nf_conntrack_proto_dccp_init(void)
 {
 	int err;
 
-	err = register_pernet_gen_subsys(&dccp_net_id, &dccp_net_ops);
+	err = register_pernet_subsys(&dccp_net_ops);
 	if (err < 0)
 		goto err1;
 
@@ -899,14 +874,14 @@
 err3:
 	nf_conntrack_l4proto_unregister(&dccp_proto4);
 err2:
-	unregister_pernet_gen_subsys(dccp_net_id, &dccp_net_ops);
+	unregister_pernet_subsys(&dccp_net_ops);
 err1:
 	return err;
 }
 
 static void __exit nf_conntrack_proto_dccp_fini(void)
 {
-	unregister_pernet_gen_subsys(dccp_net_id, &dccp_net_ops);
+	unregister_pernet_subsys(&dccp_net_ops);
 	nf_conntrack_l4proto_unregister(&dccp_proto6);
 	nf_conntrack_l4proto_unregister(&dccp_proto4);
 }
diff --git a/net/netfilter/nf_conntrack_proto_generic.c b/net/netfilter/nf_conntrack_proto_generic.c
index 829374f4..e2091d0 100644
--- a/net/netfilter/nf_conntrack_proto_generic.c
+++ b/net/netfilter/nf_conntrack_proto_generic.c
@@ -69,9 +69,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #ifdef CONFIG_NF_CONNTRACK_PROC_COMPAT
 static struct ctl_table generic_compat_sysctl_table[] = {
@@ -82,9 +80,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #endif /* CONFIG_NF_CONNTRACK_PROC_COMPAT */
 #endif /* CONFIG_SYSCTL */
diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index a54a0af..c99cfba 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -43,7 +43,7 @@
 #define GRE_TIMEOUT		(30 * HZ)
 #define GRE_STREAM_TIMEOUT	(180 * HZ)
 
-static int proto_gre_net_id;
+static int proto_gre_net_id __read_mostly;
 struct netns_proto_gre {
 	rwlock_t		keymap_lock;
 	struct list_head	keymap_list;
@@ -300,32 +300,24 @@
 
 static int proto_gre_net_init(struct net *net)
 {
-	struct netns_proto_gre *net_gre;
-	int rv;
+	struct netns_proto_gre *net_gre = net_generic(net, proto_gre_net_id);
 
-	net_gre = kmalloc(sizeof(struct netns_proto_gre), GFP_KERNEL);
-	if (!net_gre)
-		return -ENOMEM;
 	rwlock_init(&net_gre->keymap_lock);
 	INIT_LIST_HEAD(&net_gre->keymap_list);
 
-	rv = net_assign_generic(net, proto_gre_net_id, net_gre);
-	if (rv < 0)
-		kfree(net_gre);
-	return rv;
+	return 0;
 }
 
 static void proto_gre_net_exit(struct net *net)
 {
-	struct netns_proto_gre *net_gre = net_generic(net, proto_gre_net_id);
-
 	nf_ct_gre_keymap_flush(net);
-	kfree(net_gre);
 }
 
 static struct pernet_operations proto_gre_net_ops = {
 	.init = proto_gre_net_init,
 	.exit = proto_gre_net_exit,
+	.id   = &proto_gre_net_id,
+	.size = sizeof(struct netns_proto_gre),
 };
 
 static int __init nf_ct_proto_gre_init(void)
@@ -335,7 +327,7 @@
 	rv = nf_conntrack_l4proto_register(&nf_conntrack_l4proto_gre4);
 	if (rv < 0)
 		return rv;
-	rv = register_pernet_gen_subsys(&proto_gre_net_id, &proto_gre_net_ops);
+	rv = register_pernet_subsys(&proto_gre_net_ops);
 	if (rv < 0)
 		nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_gre4);
 	return rv;
@@ -344,7 +336,7 @@
 static void __exit nf_ct_proto_gre_fini(void)
 {
 	nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_gre4);
-	unregister_pernet_gen_subsys(proto_gre_net_id, &proto_gre_net_ops);
+	unregister_pernet_subsys(&proto_gre_net_ops);
 }
 
 module_init(nf_ct_proto_gre_init);
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index c10e6f3..f9d930f 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -595,9 +595,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name = 0
-	}
+	{ }
 };
 
 #ifdef CONFIG_NF_CONNTRACK_PROC_COMPAT
@@ -651,9 +649,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name = 0
-	}
+	{ }
 };
 #endif /* CONFIG_NF_CONNTRACK_PROC_COMPAT */
 #endif
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index ba2b769..3c96437 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -896,23 +896,54 @@
 			/* b) This SYN/ACK acknowledges a SYN that we earlier
 			 * ignored as invalid. This means that the client and
 			 * the server are both in sync, while the firewall is
-			 * not. We kill this session and block the SYN/ACK so
-			 * that the client cannot but retransmit its SYN and
-			 * thus initiate a clean new session.
+			 * not. We get in sync from the previously annotated
+			 * values.
 			 */
-			spin_unlock_bh(&ct->lock);
-			if (LOG_INVALID(net, IPPROTO_TCP))
-				nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
-					  "nf_ct_tcp: killing out of sync session ");
-			nf_ct_kill(ct);
-			return NF_DROP;
+			old_state = TCP_CONNTRACK_SYN_SENT;
+			new_state = TCP_CONNTRACK_SYN_RECV;
+			ct->proto.tcp.seen[ct->proto.tcp.last_dir].td_end =
+				ct->proto.tcp.last_end;
+			ct->proto.tcp.seen[ct->proto.tcp.last_dir].td_maxend =
+				ct->proto.tcp.last_end;
+			ct->proto.tcp.seen[ct->proto.tcp.last_dir].td_maxwin =
+				ct->proto.tcp.last_win == 0 ?
+					1 : ct->proto.tcp.last_win;
+			ct->proto.tcp.seen[ct->proto.tcp.last_dir].td_scale =
+				ct->proto.tcp.last_wscale;
+			ct->proto.tcp.seen[ct->proto.tcp.last_dir].flags =
+				ct->proto.tcp.last_flags;
+			memset(&ct->proto.tcp.seen[dir], 0,
+			       sizeof(struct ip_ct_tcp_state));
+			break;
 		}
 		ct->proto.tcp.last_index = index;
 		ct->proto.tcp.last_dir = dir;
 		ct->proto.tcp.last_seq = ntohl(th->seq);
 		ct->proto.tcp.last_end =
 		    segment_seq_plus_len(ntohl(th->seq), skb->len, dataoff, th);
+		ct->proto.tcp.last_win = ntohs(th->window);
 
+		/* a) This is a SYN in ORIGINAL. The client and the server
+		 * may be in sync but we are not. In that case, we annotate
+		 * the TCP options and let the packet go through. If it is a
+		 * valid SYN packet, the server will reply with a SYN/ACK, and
+		 * then we'll get in sync. Otherwise, the server ignores it. */
+		if (index == TCP_SYN_SET && dir == IP_CT_DIR_ORIGINAL) {
+			struct ip_ct_tcp_state seen = {};
+
+			ct->proto.tcp.last_flags =
+			ct->proto.tcp.last_wscale = 0;
+			tcp_options(skb, dataoff, th, &seen);
+			if (seen.flags & IP_CT_TCP_FLAG_WINDOW_SCALE) {
+				ct->proto.tcp.last_flags |=
+					IP_CT_TCP_FLAG_WINDOW_SCALE;
+				ct->proto.tcp.last_wscale = seen.td_scale;
+			}
+			if (seen.flags & IP_CT_TCP_FLAG_SACK_PERM) {
+				ct->proto.tcp.last_flags |=
+					IP_CT_TCP_FLAG_SACK_PERM;
+			}
+		}
 		spin_unlock_bh(&ct->lock);
 		if (LOG_INVALID(net, IPPROTO_TCP))
 			nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
@@ -1291,7 +1322,6 @@
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_TCP_LOOSE,
 		.procname	= "nf_conntrack_tcp_loose",
 		.data		= &nf_ct_tcp_loose,
 		.maxlen		= sizeof(unsigned int),
@@ -1299,7 +1329,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_TCP_BE_LIBERAL,
 		.procname       = "nf_conntrack_tcp_be_liberal",
 		.data           = &nf_ct_tcp_be_liberal,
 		.maxlen         = sizeof(unsigned int),
@@ -1307,16 +1336,13 @@
 		.proc_handler   = proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_TCP_MAX_RETRANS,
 		.procname	= "nf_conntrack_tcp_max_retrans",
 		.data		= &nf_ct_tcp_max_retrans,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 
 #ifdef CONFIG_NF_CONNTRACK_PROC_COMPAT
@@ -1392,7 +1418,6 @@
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_TCP_LOOSE,
 		.procname	= "ip_conntrack_tcp_loose",
 		.data		= &nf_ct_tcp_loose,
 		.maxlen		= sizeof(unsigned int),
@@ -1400,7 +1425,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_TCP_BE_LIBERAL,
 		.procname	= "ip_conntrack_tcp_be_liberal",
 		.data		= &nf_ct_tcp_be_liberal,
 		.maxlen		= sizeof(unsigned int),
@@ -1408,16 +1432,13 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_IPV4_NF_CONNTRACK_TCP_MAX_RETRANS,
 		.procname	= "ip_conntrack_tcp_max_retrans",
 		.data		= &nf_ct_tcp_max_retrans,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #endif /* CONFIG_NF_CONNTRACK_PROC_COMPAT */
 #endif /* CONFIG_SYSCTL */
diff --git a/net/netfilter/nf_conntrack_proto_udp.c b/net/netfilter/nf_conntrack_proto_udp.c
index 70809d1..5c5518b 100644
--- a/net/netfilter/nf_conntrack_proto_udp.c
+++ b/net/netfilter/nf_conntrack_proto_udp.c
@@ -154,9 +154,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #ifdef CONFIG_NF_CONNTRACK_PROC_COMPAT
 static struct ctl_table udp_compat_sysctl_table[] = {
@@ -174,9 +172,7 @@
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #endif /* CONFIG_NF_CONNTRACK_PROC_COMPAT */
 #endif /* CONFIG_SYSCTL */
diff --git a/net/netfilter/nf_conntrack_proto_udplite.c b/net/netfilter/nf_conntrack_proto_udplite.c
index 0badedc..458655b 100644
--- a/net/netfilter/nf_conntrack_proto_udplite.c
+++ b/net/netfilter/nf_conntrack_proto_udplite.c
@@ -146,7 +146,6 @@
 static struct ctl_table_header *udplite_sysctl_header;
 static struct ctl_table udplite_sysctl_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_udplite_timeout",
 		.data		= &nf_ct_udplite_timeout,
 		.maxlen		= sizeof(unsigned int),
@@ -154,16 +153,13 @@
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_udplite_timeout_stream",
 		.data		= &nf_ct_udplite_timeout_stream,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name	= 0
-	}
+	{ }
 };
 #endif /* CONFIG_SYSCTL */
 
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 1935153..028aba6 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -340,7 +340,6 @@
 
 static ctl_table nf_ct_sysctl_table[] = {
 	{
-		.ctl_name	= NET_NF_CONNTRACK_MAX,
 		.procname	= "nf_conntrack_max",
 		.data		= &nf_conntrack_max,
 		.maxlen		= sizeof(int),
@@ -348,7 +347,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_COUNT,
 		.procname	= "nf_conntrack_count",
 		.data		= &init_net.ct.count,
 		.maxlen		= sizeof(int),
@@ -356,7 +354,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name       = NET_NF_CONNTRACK_BUCKETS,
 		.procname       = "nf_conntrack_buckets",
 		.data           = &nf_conntrack_htable_size,
 		.maxlen         = sizeof(unsigned int),
@@ -364,7 +361,6 @@
 		.proc_handler   = proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_CHECKSUM,
 		.procname	= "nf_conntrack_checksum",
 		.data		= &init_net.ct.sysctl_checksum,
 		.maxlen		= sizeof(unsigned int),
@@ -372,43 +368,39 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= NET_NF_CONNTRACK_LOG_INVALID,
 		.procname	= "nf_conntrack_log_invalid",
 		.data		= &init_net.ct.sysctl_log_invalid,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &log_invalid_proto_min,
 		.extra2		= &log_invalid_proto_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "nf_conntrack_expect_max",
 		.data		= &nf_ct_expect_max,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 #define NET_NF_CONNTRACK_MAX 2089
 
 static ctl_table nf_ct_netfilter_table[] = {
 	{
-		.ctl_name	= NET_NF_CONNTRACK_MAX,
 		.procname	= "nf_conntrack_max",
 		.data		= &nf_conntrack_max,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path nf_ct_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
+	{ .procname = "net", },
 	{ }
 };
 
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index c93494f..015725a 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -128,9 +128,8 @@
 
 #ifdef CONFIG_PROC_FS
 static void *seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(RCU)
 {
-	rcu_read_lock();
+	mutex_lock(&nf_log_mutex);
 
 	if (*pos >= ARRAY_SIZE(nf_loggers))
 		return NULL;
@@ -149,9 +148,8 @@
 }
 
 static void seq_stop(struct seq_file *s, void *v)
-	__releases(RCU)
 {
-	rcu_read_unlock();
+	mutex_unlock(&nf_log_mutex);
 }
 
 static int seq_show(struct seq_file *s, void *v)
@@ -161,7 +159,7 @@
 	struct nf_logger *t;
 	int ret;
 
-	logger = rcu_dereference(nf_loggers[*pos]);
+	logger = nf_loggers[*pos];
 
 	if (!logger)
 		ret = seq_printf(s, "%2lld NONE (", *pos);
@@ -171,22 +169,16 @@
 	if (ret < 0)
 		return ret;
 
-	mutex_lock(&nf_log_mutex);
 	list_for_each_entry(t, &nf_loggers_l[*pos], list[*pos]) {
 		ret = seq_printf(s, "%s", t->name);
-		if (ret < 0) {
-			mutex_unlock(&nf_log_mutex);
+		if (ret < 0)
 			return ret;
-		}
 		if (&t->list[*pos] != nf_loggers_l[*pos].prev) {
 			ret = seq_printf(s, ",");
-			if (ret < 0) {
-				mutex_unlock(&nf_log_mutex);
+			if (ret < 0)
 				return ret;
-			}
 		}
 	}
-	mutex_unlock(&nf_log_mutex);
 
 	return seq_printf(s, ")\n");
 }
@@ -216,9 +208,9 @@
 
 #ifdef CONFIG_SYSCTL
 static struct ctl_path nf_log_sysctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "netfilter", .ctl_name = NET_NETFILTER, },
-	{ .procname = "nf_log", .ctl_name = CTL_UNNUMBERED, },
+	{ .procname = "net", },
+	{ .procname = "netfilter", },
+	{ .procname = "nf_log", },
 	{ }
 };
 
@@ -273,7 +265,6 @@
 
 	for (i = NFPROTO_UNSPEC; i < NFPROTO_NUMPROTO; i++) {
 		snprintf(nf_log_sysctl_fnames[i-NFPROTO_UNSPEC], 3, "%d", i);
-		nf_log_sysctl_table[i].ctl_name	= CTL_UNNUMBERED;
 		nf_log_sysctl_table[i].procname	=
 			nf_log_sysctl_fnames[i-NFPROTO_UNSPEC];
 		nf_log_sysctl_table[i].data = NULL;
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index f900dc3..9de0470 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -666,8 +666,7 @@
 {
 	struct netlink_notify *n = ptr;
 
-	if (event == NETLINK_URELEASE &&
-	    n->protocol == NETLINK_NETFILTER && n->pid) {
+	if (event == NETLINK_URELEASE && n->protocol == NETLINK_NETFILTER) {
 		int i;
 
 		/* destroy all instances for this pid */
@@ -678,7 +677,7 @@
 			struct hlist_head *head = &instance_table[i];
 
 			hlist_for_each_entry_safe(inst, tmp, t2, head, hlist) {
-				if ((n->net == &init_net) &&
+				if ((net_eq(n->net, &init_net)) &&
 				    (n->pid == inst->peer_pid))
 					__instance_destroy(inst);
 			}
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 7a9dec9..7e3fa4106 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -574,8 +574,7 @@
 {
 	struct netlink_notify *n = ptr;
 
-	if (event == NETLINK_URELEASE &&
-	    n->protocol == NETLINK_NETFILTER && n->pid) {
+	if (event == NETLINK_URELEASE && n->protocol == NETLINK_NETFILTER) {
 		int i;
 
 		/* destroy all instances for this pid */
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index 6dc4652..ae66305 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -113,7 +113,8 @@
 }
 
 static bool
-conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par)
+conntrack_mt(const struct sk_buff *skb, const struct xt_match_param *par,
+             u16 state_mask, u16 status_mask)
 {
 	const struct xt_conntrack_mtinfo2 *info = par->matchinfo;
 	enum ip_conntrack_info ctinfo;
@@ -136,7 +137,7 @@
 			if (test_bit(IPS_DST_NAT_BIT, &ct->status))
 				statebit |= XT_CONNTRACK_STATE_DNAT;
 		}
-		if (!!(info->state_mask & statebit) ^
+		if (!!(state_mask & statebit) ^
 		    !(info->invert_flags & XT_CONNTRACK_STATE))
 			return false;
 	}
@@ -172,7 +173,7 @@
 		return false;
 
 	if ((info->match_flags & XT_CONNTRACK_STATUS) &&
-	    (!!(info->status_mask & ct->status) ^
+	    (!!(status_mask & ct->status) ^
 	    !(info->invert_flags & XT_CONNTRACK_STATUS)))
 		return false;
 
@@ -192,11 +193,17 @@
 static bool
 conntrack_mt_v1(const struct sk_buff *skb, const struct xt_match_param *par)
 {
-	const struct xt_conntrack_mtinfo2 *const *info = par->matchinfo;
-	struct xt_match_param newpar = *par;
+	const struct xt_conntrack_mtinfo1 *info = par->matchinfo;
 
-	newpar.matchinfo = *info;
-	return conntrack_mt(skb, &newpar);
+	return conntrack_mt(skb, par, info->state_mask, info->status_mask);
+}
+
+static bool
+conntrack_mt_v2(const struct sk_buff *skb, const struct xt_match_param *par)
+{
+	const struct xt_conntrack_mtinfo2 *info = par->matchinfo;
+
+	return conntrack_mt(skb, par, info->state_mask, info->status_mask);
 }
 
 static bool conntrack_mt_check(const struct xt_mtchk_param *par)
@@ -209,45 +216,11 @@
 	return true;
 }
 
-static bool conntrack_mt_check_v1(const struct xt_mtchk_param *par)
-{
-	struct xt_conntrack_mtinfo1 *info = par->matchinfo;
-	struct xt_conntrack_mtinfo2 *up;
-	int ret = conntrack_mt_check(par);
-
-	if (ret < 0)
-		return ret;
-
-	up = kmalloc(sizeof(*up), GFP_KERNEL);
-	if (up == NULL) {
-		nf_ct_l3proto_module_put(par->family);
-		return -ENOMEM;
-	}
-
-	/*
-	 * The strategy here is to minimize the overhead of v1 matching,
-	 * by prebuilding a v2 struct and putting the pointer into the
-	 * v1 dataspace.
-	 */
-	memcpy(up, info, offsetof(typeof(*info), state_mask));
-	up->state_mask  = info->state_mask;
-	up->status_mask = info->status_mask;
-	*(void **)info  = up;
-	return true;
-}
-
 static void conntrack_mt_destroy(const struct xt_mtdtor_param *par)
 {
 	nf_ct_l3proto_module_put(par->family);
 }
 
-static void conntrack_mt_destroy_v1(const struct xt_mtdtor_param *par)
-{
-	struct xt_conntrack_mtinfo2 **info = par->matchinfo;
-	kfree(*info);
-	conntrack_mt_destroy(par);
-}
-
 static struct xt_match conntrack_mt_reg[] __read_mostly = {
 	{
 		.name       = "conntrack",
@@ -255,8 +228,8 @@
 		.family     = NFPROTO_UNSPEC,
 		.matchsize  = sizeof(struct xt_conntrack_mtinfo1),
 		.match      = conntrack_mt_v1,
-		.checkentry = conntrack_mt_check_v1,
-		.destroy    = conntrack_mt_destroy_v1,
+		.checkentry = conntrack_mt_check,
+		.destroy    = conntrack_mt_destroy,
 		.me         = THIS_MODULE,
 	},
 	{
@@ -264,7 +237,7 @@
 		.revision   = 2,
 		.family     = NFPROTO_UNSPEC,
 		.matchsize  = sizeof(struct xt_conntrack_mtinfo2),
-		.match      = conntrack_mt,
+		.match      = conntrack_mt_v2,
 		.checkentry = conntrack_mt_check,
 		.destroy    = conntrack_mt_destroy,
 		.me         = THIS_MODULE,
diff --git a/net/netfilter/xt_limit.c b/net/netfilter/xt_limit.c
index 2e8089e..2773be6 100644
--- a/net/netfilter/xt_limit.c
+++ b/net/netfilter/xt_limit.c
@@ -112,7 +112,7 @@
 
 	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
 	if (priv == NULL)
-		return -ENOMEM;
+		return false;
 
 	/* For SMP, we only want to use one set of state. */
 	r->master = priv;
diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c
index 63e1905..4d1a41b 100644
--- a/net/netfilter/xt_osf.c
+++ b/net/netfilter/xt_osf.c
@@ -118,7 +118,7 @@
 {
 	struct xt_osf_user_finger *f;
 	struct xt_osf_finger *sf;
-	int err = ENOENT;
+	int err = -ENOENT;
 
 	if (!osf_attrs[OSF_ATTR_FINGER])
 		return -EINVAL;
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index ebf00ad..6a90256 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -149,7 +149,7 @@
 
 		/* Ignore sockets listening on INADDR_ANY */
 		wildcard = (sk->sk_state != TCP_TIME_WAIT &&
-			    inet_sk(sk)->rcv_saddr == 0);
+			    inet_sk(sk)->inet_rcv_saddr == 0);
 
 		/* Ignore non-transparent sockets,
 		   if XT_SOCKET_TRANSPARENT is used */
@@ -192,7 +192,8 @@
 		.revision	= 0,
 		.family		= NFPROTO_IPV4,
 		.match		= socket_mt_v0,
-		.hooks		= 1 << NF_INET_PRE_ROUTING,
+		.hooks		= (1 << NF_INET_PRE_ROUTING) |
+				  (1 << NF_INET_LOCAL_IN),
 		.me		= THIS_MODULE,
 	},
 	{
@@ -201,7 +202,8 @@
 		.family		= NFPROTO_IPV4,
 		.match		= socket_mt_v1,
 		.matchsize	= sizeof(struct xt_socket_mtinfo1),
-		.hooks		= 1 << NF_INET_PRE_ROUTING,
+		.hooks		= (1 << NF_INET_PRE_ROUTING) |
+				  (1 << NF_INET_LOCAL_IN),
 		.me		= THIS_MODULE,
 	},
 };
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index fb357f0..98ed22e 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -472,13 +472,12 @@
 
 	rcu_read_lock();
 	if (dev_name != NULL) {
-		dev = dev_get_by_name(net, dev_name);
+		dev = dev_get_by_name_rcu(net, dev_name);
 		if (dev == NULL) {
 			ret_val = -ENODEV;
 			goto unlhsh_add_return;
 		}
 		ifindex = dev->ifindex;
-		dev_put(dev);
 		iface = netlbl_unlhsh_search_iface(ifindex);
 	} else {
 		ifindex = 0;
@@ -737,13 +736,12 @@
 
 	rcu_read_lock();
 	if (dev_name != NULL) {
-		dev = dev_get_by_name(net, dev_name);
+		dev = dev_get_by_name_rcu(net, dev_name);
 		if (dev == NULL) {
 			ret_val = -ENODEV;
 			goto unlhsh_remove_return;
 		}
 		iface = netlbl_unlhsh_search_iface(dev->ifindex);
-		dev_put(dev);
 	} else
 		iface = rcu_dereference(netlbl_unlhsh_def);
 	if (iface == NULL) {
@@ -1552,7 +1550,7 @@
 	struct netlbl_unlhsh_iface *iface;
 
 	rcu_read_lock();
-	iface = netlbl_unlhsh_search_iface_def(skb->iif);
+	iface = netlbl_unlhsh_search_iface_def(skb->skb_iif);
 	if (iface == NULL)
 		goto unlabel_getattr_nolabel;
 	switch (family) {
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 19e9800..a4957bf 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -428,7 +428,8 @@
 	return 0;
 }
 
-static int netlink_create(struct net *net, struct socket *sock, int protocol)
+static int netlink_create(struct net *net, struct socket *sock, int protocol,
+			  int kern)
 {
 	struct module *module = NULL;
 	struct mutex *cb_mutex;
@@ -497,7 +498,7 @@
 
 	skb_queue_purge(&sk->sk_write_queue);
 
-	if (nlk->pid && !nlk->subscriptions) {
+	if (nlk->pid) {
 		struct netlink_notify n = {
 						.net = sock_net(sk),
 						.protocol = sk->sk_protocol,
@@ -707,7 +708,7 @@
 {
 	struct sock *sk = sock->sk;
 	struct netlink_sock *nlk = nlk_sk(sk);
-	struct sockaddr_nl *nladdr = (struct sockaddr_nl *)addr;
+	DECLARE_SOCKADDR(struct sockaddr_nl *, nladdr, addr);
 
 	nladdr->nl_family = AF_NETLINK;
 	nladdr->nl_pad = 0;
@@ -1091,7 +1092,7 @@
 	if (sk == p->exclude_sk)
 		goto out;
 
-	if (sock_net(sk) != sock_net(p->exclude_sk))
+	if (!net_eq(sock_net(sk), sock_net(p->exclude_sk)))
 		goto out;
 
 	if (nlk->pid == p->pid || p->group - 1 >= nlk->ngroups ||
@@ -2050,7 +2051,7 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-static struct net_proto_family netlink_family_ops = {
+static const struct net_proto_family netlink_family_ops = {
 	.family = PF_NETLINK,
 	.create = netlink_create,
 	.owner	= THIS_MODULE,	/* for consistency 8) */
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 44ff3f3..d07ecda 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -97,25 +97,17 @@
 */
 static inline u16 genl_generate_id(void)
 {
-	static u16 id_gen_idx;
-	int overflowed = 0;
+	static u16 id_gen_idx = GENL_MIN_ID;
+	int i;
 
-	do {
-		if (id_gen_idx == 0)
+	for (i = 0; i <= GENL_MAX_ID - GENL_MIN_ID; i++) {
+		if (!genl_family_find_byid(id_gen_idx))
+			return id_gen_idx;
+		if (++id_gen_idx > GENL_MAX_ID)
 			id_gen_idx = GENL_MIN_ID;
+	}
 
-		if (++id_gen_idx > GENL_MAX_ID) {
-			if (!overflowed) {
-				overflowed = 1;
-				id_gen_idx = 0;
-				continue;
-			} else
-				return 0;
-		}
-
-	} while (genl_family_find_byid(id_gen_idx));
-
-	return id_gen_idx;
+	return 0;
 }
 
 static struct genl_multicast_group notify_grp;
@@ -374,11 +366,6 @@
 		goto errout_locked;
 	}
 
-	if (genl_family_find_byid(family->id)) {
-		err = -EEXIST;
-		goto errout_locked;
-	}
-
 	if (family->id == GENL_ID_GENERATE) {
 		u16 newid = genl_generate_id();
 
@@ -388,6 +375,9 @@
 		}
 
 		family->id = newid;
+	} else if (genl_family_find_byid(family->id)) {
+		err = -EEXIST;
+		goto errout_locked;
 	}
 
 	if (family->maxattr) {
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 7a83495..71604c6 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -425,12 +425,13 @@
 	.obj_size = sizeof(struct nr_sock),
 };
 
-static int nr_create(struct net *net, struct socket *sock, int protocol)
+static int nr_create(struct net *net, struct socket *sock, int protocol,
+		     int kern)
 {
 	struct sock *sk;
 	struct nr_sock *nr;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	if (sock->type != SOCK_SEQPACKET || protocol != 0)
@@ -1372,7 +1373,7 @@
 };
 #endif	/* CONFIG_PROC_FS */
 
-static struct net_proto_family nr_family_ops = {
+static const struct net_proto_family nr_family_ops = {
 	.family		=	PF_NETROM,
 	.create		=	nr_create,
 	.owner		=	THIS_MODULE,
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index 4eb1ac9..aacba76 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -597,15 +597,15 @@
 {
 	struct net_device *dev, *first = NULL;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_NETROM)
 			if (first == NULL || strncmp(dev->name, first->name, 3) < 0)
 				first = dev;
 	}
 	if (first)
 		dev_hold(first);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	return first;
 }
@@ -617,16 +617,17 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
-		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_NETROM && ax25cmp(addr, (ax25_address *)dev->dev_addr) == 0) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
+		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_NETROM &&
+		    ax25cmp(addr, (ax25_address *)dev->dev_addr) == 0) {
 			dev_hold(dev);
 			goto out;
 		}
 	}
 	dev = NULL;
 out:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 
diff --git a/net/netrom/sysctl_net_netrom.c b/net/netrom/sysctl_net_netrom.c
index 7b49591f..1e0fa9e5 100644
--- a/net/netrom/sysctl_net_netrom.c
+++ b/net/netrom/sysctl_net_netrom.c
@@ -36,143 +36,119 @@
 
 static ctl_table nr_table[] = {
 	{
-		.ctl_name	= NET_NETROM_DEFAULT_PATH_QUALITY,
 		.procname	= "default_path_quality",
 		.data		= &sysctl_netrom_default_path_quality,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_quality,
 		.extra2		= &max_quality
 	},
 	{
-		.ctl_name	= NET_NETROM_OBSOLESCENCE_COUNT_INITIALISER,
 		.procname	= "obsolescence_count_initialiser",
 		.data		= &sysctl_netrom_obsolescence_count_initialiser,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_obs,
 		.extra2		= &max_obs
 	},
 	{
-		.ctl_name	= NET_NETROM_NETWORK_TTL_INITIALISER,
 		.procname	= "network_ttl_initialiser",
 		.data		= &sysctl_netrom_network_ttl_initialiser,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_ttl,
 		.extra2		= &max_ttl
 	},
 	{
-		.ctl_name	= NET_NETROM_TRANSPORT_TIMEOUT,
 		.procname	= "transport_timeout",
 		.data		= &sysctl_netrom_transport_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_t1,
 		.extra2		= &max_t1
 	},
 	{
-		.ctl_name	= NET_NETROM_TRANSPORT_MAXIMUM_TRIES,
 		.procname	= "transport_maximum_tries",
 		.data		= &sysctl_netrom_transport_maximum_tries,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_n2,
 		.extra2		= &max_n2
 	},
 	{
-		.ctl_name	= NET_NETROM_TRANSPORT_ACKNOWLEDGE_DELAY,
 		.procname	= "transport_acknowledge_delay",
 		.data		= &sysctl_netrom_transport_acknowledge_delay,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_t2,
 		.extra2		= &max_t2
 	},
 	{
-		.ctl_name	= NET_NETROM_TRANSPORT_BUSY_DELAY,
 		.procname	= "transport_busy_delay",
 		.data		= &sysctl_netrom_transport_busy_delay,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_t4,
 		.extra2		= &max_t4
 	},
 	{
-		.ctl_name	= NET_NETROM_TRANSPORT_REQUESTED_WINDOW_SIZE,
 		.procname	= "transport_requested_window_size",
 		.data		= &sysctl_netrom_transport_requested_window_size,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_window,
 		.extra2		= &max_window
 	},
 	{
-		.ctl_name	= NET_NETROM_TRANSPORT_NO_ACTIVITY_TIMEOUT,
 		.procname	= "transport_no_activity_timeout",
 		.data		= &sysctl_netrom_transport_no_activity_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_idle,
 		.extra2		= &max_idle
 	},
 	{
-		.ctl_name	= NET_NETROM_ROUTING_CONTROL,
 		.procname	= "routing_control",
 		.data		= &sysctl_netrom_routing_control,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_route,
 		.extra2		= &max_route
 	},
 	{
-		.ctl_name	= NET_NETROM_LINK_FAILS_COUNT,
 		.procname	= "link_fails_count",
 		.data		= &sysctl_netrom_link_fails_count,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_fails,
 		.extra2		= &max_fails
 	},
 	{
-		.ctl_name	= NET_NETROM_RESET,
 		.procname	= "reset",
 		.data		= &sysctl_netrom_reset_circuit,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_reset,
 		.extra2		= &max_reset
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path nr_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "netrom", .ctl_name = NET_NETROM, },
+	{ .procname = "net", },
+	{ .procname = "netrom", },
 	{ }
 };
 
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index f2d116a..0205621 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -79,6 +79,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/if_vlan.h>
 
 #ifdef CONFIG_INET
 #include <net/inet_common.h>
@@ -188,7 +189,6 @@
 	struct packet_ring_buffer	tx_ring;
 	int			copy_thresh;
 #endif
-	struct packet_type	prot_hook;
 	spinlock_t		bind_lock;
 	struct mutex		pg_vec_lock;
 	unsigned int		running:1,	/* prot_hook is attached*/
@@ -204,6 +204,7 @@
 	unsigned int		tp_reserve;
 	unsigned int		tp_loss:1;
 #endif
+	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
 };
 
 struct packet_skb_cb {
@@ -364,7 +365,7 @@
 	if (skb->pkt_type == PACKET_LOOPBACK)
 		goto out;
 
-	if (dev_net(dev) != sock_net(sk))
+	if (!net_eq(dev_net(dev), sock_net(sk)))
 		goto out;
 
 	skb = skb_share_check(skb, GFP_ATOMIC);
@@ -436,7 +437,8 @@
 	 */
 
 	saddr->spkt_device[13] = 0;
-	dev = dev_get_by_name(sock_net(sk), saddr->spkt_device);
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(sock_net(sk), saddr->spkt_device);
 	err = -ENODEV;
 	if (dev == NULL)
 		goto out_unlock;
@@ -490,6 +492,7 @@
 	skb->protocol = proto;
 	skb->dev = dev;
 	skb->priority = sk->sk_priority;
+	skb->mark = sk->sk_mark;
 	if (err)
 		goto out_free;
 
@@ -498,14 +501,13 @@
 	 */
 
 	dev_queue_xmit(skb);
-	dev_put(dev);
+	rcu_read_unlock();
 	return len;
 
 out_free:
 	kfree_skb(skb);
 out_unlock:
-	if (dev)
-		dev_put(dev);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -551,7 +553,7 @@
 	sk = pt->af_packet_priv;
 	po = pkt_sk(sk);
 
-	if (dev_net(dev) != sock_net(sk))
+	if (!net_eq(dev_net(dev), sock_net(sk)))
 		goto drop;
 
 	skb->dev = dev;
@@ -626,15 +628,14 @@
 
 	spin_lock(&sk->sk_receive_queue.lock);
 	po->stats.tp_packets++;
+	skb->dropcount = atomic_read(&sk->sk_drops);
 	__skb_queue_tail(&sk->sk_receive_queue, skb);
 	spin_unlock(&sk->sk_receive_queue.lock);
 	sk->sk_data_ready(sk, skb->len);
 	return 0;
 
 drop_n_acct:
-	spin_lock(&sk->sk_receive_queue.lock);
-	po->stats.tp_drops++;
-	spin_unlock(&sk->sk_receive_queue.lock);
+	po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);
 
 drop_n_restore:
 	if (skb_head != skb->data && skb_shared(skb)) {
@@ -673,7 +674,7 @@
 	sk = pt->af_packet_priv;
 	po = pkt_sk(sk);
 
-	if (dev_net(dev) != sock_net(sk))
+	if (!net_eq(dev_net(dev), sock_net(sk)))
 		goto drop;
 
 	if (dev->header_ops) {
@@ -766,7 +767,7 @@
 			getnstimeofday(&ts);
 		h.h2->tp_sec = ts.tv_sec;
 		h.h2->tp_nsec = ts.tv_nsec;
-		h.h2->tp_vlan_tci = skb->vlan_tci;
+		h.h2->tp_vlan_tci = vlan_tx_tag_get(skb);
 		hdrlen = sizeof(*h.h2);
 		break;
 	default:
@@ -856,6 +857,7 @@
 	skb->protocol = proto;
 	skb->dev = dev;
 	skb->priority = po->sk.sk_priority;
+	skb->mark = po->sk.sk_mark;
 	skb_shinfo(skb)->destructor_arg = ph.raw;
 
 	switch (po->tp_version) {
@@ -1032,9 +1034,10 @@
 			goto out_xmit;
 		packet_increment_head(&po->tx_ring);
 		len_sum += tp_len;
-	} while (likely((ph != NULL) || ((!(msg->msg_flags & MSG_DONTWAIT))
-					&& (atomic_read(&po->tx_ring.pending))))
-	      );
+	} while (likely((ph != NULL) ||
+			((!(msg->msg_flags & MSG_DONTWAIT)) &&
+			 (atomic_read(&po->tx_ring.pending))))
+		);
 
 	err = len_sum;
 	goto out_put;
@@ -1122,6 +1125,7 @@
 	skb->protocol = proto;
 	skb->dev = dev;
 	skb->priority = sk->sk_priority;
+	skb->mark = sk->sk_mark;
 
 	/*
 	 *	Now send it
@@ -1341,7 +1345,8 @@
  *	Create a packet of type SOCK_PACKET.
  */
 
-static int packet_create(struct net *net, struct socket *sock, int protocol)
+static int packet_create(struct net *net, struct socket *sock, int protocol,
+			 int kern)
 {
 	struct sock *sk;
 	struct packet_sock *po;
@@ -1472,7 +1477,7 @@
 	if (err)
 		goto out_free;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name)
 		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa,
@@ -1488,7 +1493,7 @@
 		aux.tp_snaplen = skb->len;
 		aux.tp_mac = 0;
 		aux.tp_net = skb_network_offset(skb);
-		aux.tp_vlan_tci = skb->vlan_tci;
+		aux.tp_vlan_tci = vlan_tx_tag_get(skb);
 
 		put_cmsg(msg, SOL_PACKET, PACKET_AUXDATA, sizeof(aux), &aux);
 	}
@@ -1515,12 +1520,13 @@
 		return -EOPNOTSUPP;
 
 	uaddr->sa_family = AF_PACKET;
-	dev = dev_get_by_index(sock_net(sk), pkt_sk(sk)->ifindex);
-	if (dev) {
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex);
+	if (dev)
 		strlcpy(uaddr->sa_data, dev->name, 15);
-		dev_put(dev);
-	} else
+	else
 		memset(uaddr->sa_data, 0, 14);
+	rcu_read_unlock();
 	*uaddr_len = sizeof(*uaddr);
 
 	return 0;
@@ -1532,7 +1538,7 @@
 	struct net_device *dev;
 	struct sock *sk = sock->sk;
 	struct packet_sock *po = pkt_sk(sk);
-	struct sockaddr_ll *sll = (struct sockaddr_ll *)uaddr;
+	DECLARE_SOCKADDR(struct sockaddr_ll *, sll, uaddr);
 
 	if (peer)
 		return -EOPNOTSUPP;
@@ -1540,16 +1546,17 @@
 	sll->sll_family = AF_PACKET;
 	sll->sll_ifindex = po->ifindex;
 	sll->sll_protocol = po->num;
-	dev = dev_get_by_index(sock_net(sk), po->ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
 	if (dev) {
 		sll->sll_hatype = dev->type;
 		sll->sll_halen = dev->addr_len;
 		memcpy(sll->sll_addr, dev->dev_addr, dev->addr_len);
-		dev_put(dev);
 	} else {
 		sll->sll_hatype = 0;	/* Bad: we have no ARPHRD_UNSPEC */
 		sll->sll_halen = 0;
 	}
+	rcu_read_unlock();
 	*uaddr_len = offsetof(struct sockaddr_ll, sll_addr) + sll->sll_halen;
 
 	return 0;
@@ -1659,11 +1666,9 @@
 			if (--ml->count == 0) {
 				struct net_device *dev;
 				*mlp = ml->next;
-				dev = dev_get_by_index(sock_net(sk), ml->ifindex);
-				if (dev) {
+				dev = __dev_get_by_index(sock_net(sk), ml->ifindex);
+				if (dev)
 					packet_dev_mc(dev, ml, -1);
-					dev_put(dev);
-				}
 				kfree(ml);
 			}
 			rtnl_unlock();
@@ -1687,11 +1692,9 @@
 		struct net_device *dev;
 
 		po->mclist = ml->next;
-		dev = dev_get_by_index(sock_net(sk), ml->ifindex);
-		if (dev != NULL) {
+		dev = __dev_get_by_index(sock_net(sk), ml->ifindex);
+		if (dev != NULL)
 			packet_dev_mc(dev, ml, -1);
-			dev_put(dev);
-		}
 		kfree(ml);
 	}
 	rtnl_unlock();
@@ -2360,7 +2363,7 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-static struct net_proto_family packet_family_ops = {
+static const struct net_proto_family packet_family_ops = {
 	.family =	PF_PACKET,
 	.create =	packet_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c
index f60c0c2..526d027 100644
--- a/net/phonet/af_phonet.c
+++ b/net/phonet/af_phonet.c
@@ -35,7 +35,6 @@
 
 /* Transport protocol registration */
 static struct phonet_protocol *proto_tab[PHONET_NPROTO] __read_mostly;
-static DEFINE_SPINLOCK(proto_tab_lock);
 
 static struct phonet_protocol *phonet_proto_get(int protocol)
 {
@@ -44,11 +43,11 @@
 	if (protocol >= PHONET_NPROTO)
 		return NULL;
 
-	spin_lock(&proto_tab_lock);
-	pp = proto_tab[protocol];
+	rcu_read_lock();
+	pp = rcu_dereference(proto_tab[protocol]);
 	if (pp && !try_module_get(pp->prot->owner))
 		pp = NULL;
-	spin_unlock(&proto_tab_lock);
+	rcu_read_unlock();
 
 	return pp;
 }
@@ -60,7 +59,8 @@
 
 /* protocol family functions */
 
-static int pn_socket_create(struct net *net, struct socket *sock, int protocol)
+static int pn_socket_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 	struct pn_sock *pn;
@@ -118,7 +118,7 @@
 	return err;
 }
 
-static struct net_proto_family phonet_proto_family = {
+static const struct net_proto_family phonet_proto_family = {
 	.family = PF_PHONET,
 	.create = pn_socket_create,
 	.owner = THIS_MODULE,
@@ -190,9 +190,8 @@
 	skb->priority = 0;
 	skb->dev = dev;
 
-	if (pn_addr(src) == pn_addr(dst)) {
+	if (skb->pkt_type == PACKET_LOOPBACK) {
 		skb_reset_mac_header(skb);
-		skb->pkt_type = PACKET_LOOPBACK;
 		skb_orphan(skb);
 		if (irq)
 			netif_rx(skb);
@@ -222,6 +221,9 @@
 	if (skb == NULL)
 		return -ENOMEM;
 
+	if (phonet_address_lookup(dev_net(dev), pn_addr(dst)) == 0)
+		skb->pkt_type = PACKET_LOOPBACK;
+
 	skb_reserve(skb, MAX_PHONET_HEADER);
 	__skb_put(skb, len);
 	skb_copy_to_linear_data(skb, data, len);
@@ -235,6 +237,7 @@
 int pn_skb_send(struct sock *sk, struct sk_buff *skb,
 		const struct sockaddr_pn *target)
 {
+	struct net *net = sock_net(sk);
 	struct net_device *dev;
 	struct pn_sock *pn = pn_sk(sk);
 	int err;
@@ -243,9 +246,13 @@
 
 	err = -EHOSTUNREACH;
 	if (sk->sk_bound_dev_if)
-		dev = dev_get_by_index(sock_net(sk), sk->sk_bound_dev_if);
-	else
-		dev = phonet_device_get(sock_net(sk));
+		dev = dev_get_by_index(net, sk->sk_bound_dev_if);
+	else if (phonet_address_lookup(net, daddr) == 0) {
+		dev = phonet_device_get(net);
+		skb->pkt_type = PACKET_LOOPBACK;
+	} else
+		dev = phonet_route_output(net, daddr);
+
 	if (!dev || !(dev->flags & IFF_UP))
 		goto drop;
 
@@ -369,6 +376,12 @@
 
 	pn_skb_get_dst_sockaddr(skb, &sa);
 
+	/* check if this is broadcasted */
+	if (pn_sockaddr_get_addr(&sa) == PNADDR_BROADCAST) {
+		pn_deliver_sock_broadcast(net, skb);
+		goto out;
+	}
+
 	/* check if we are the destination */
 	if (phonet_address_lookup(net, pn_sockaddr_get_addr(&sa)) == 0) {
 		/* Phonet packet input */
@@ -381,6 +394,38 @@
 			send_obj_unreachable(skb);
 			send_reset_indications(skb);
 		}
+	} else if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+		goto out; /* Race between address deletion and loopback */
+	else {
+		/* Phonet packet routing */
+		struct net_device *out_dev;
+
+		out_dev = phonet_route_output(net, pn_sockaddr_get_addr(&sa));
+		if (!out_dev) {
+			LIMIT_NETDEBUG(KERN_WARNING"No Phonet route to %02X\n",
+					pn_sockaddr_get_addr(&sa));
+			goto out;
+		}
+
+		__skb_push(skb, sizeof(struct phonethdr));
+		skb->dev = out_dev;
+		if (out_dev == dev) {
+			LIMIT_NETDEBUG(KERN_ERR"Phonet loop to %02X on %s\n",
+					pn_sockaddr_get_addr(&sa), dev->name);
+			goto out_dev;
+		}
+		/* Some drivers (e.g. TUN) do not allocate HW header space */
+		if (skb_cow_head(skb, out_dev->hard_header_len))
+			goto out_dev;
+
+		if (dev_hard_header(skb, out_dev, ETH_P_PHONET, NULL, NULL,
+					skb->len) < 0)
+			goto out_dev;
+		dev_queue_xmit(skb);
+		dev_put(out_dev);
+		return NET_RX_SUCCESS;
+out_dev:
+		dev_put(out_dev);
 	}
 
 out:
@@ -393,6 +438,8 @@
 	.func = phonet_rcv,
 };
 
+static DEFINE_MUTEX(proto_tab_lock);
+
 int __init_or_module phonet_proto_register(int protocol,
 						struct phonet_protocol *pp)
 {
@@ -405,12 +452,12 @@
 	if (err)
 		return err;
 
-	spin_lock(&proto_tab_lock);
+	mutex_lock(&proto_tab_lock);
 	if (proto_tab[protocol])
 		err = -EBUSY;
 	else
-		proto_tab[protocol] = pp;
-	spin_unlock(&proto_tab_lock);
+		rcu_assign_pointer(proto_tab[protocol], pp);
+	mutex_unlock(&proto_tab_lock);
 
 	return err;
 }
@@ -418,10 +465,11 @@
 
 void phonet_proto_unregister(int protocol, struct phonet_protocol *pp)
 {
-	spin_lock(&proto_tab_lock);
+	mutex_lock(&proto_tab_lock);
 	BUG_ON(proto_tab[protocol] != pp);
-	proto_tab[protocol] = NULL;
-	spin_unlock(&proto_tab_lock);
+	rcu_assign_pointer(proto_tab[protocol], NULL);
+	mutex_unlock(&proto_tab_lock);
+	synchronize_rcu();
 	proto_unregister(pp->prot);
 }
 EXPORT_SYMBOL(phonet_proto_unregister);
@@ -435,6 +483,7 @@
 	if (err)
 		return err;
 
+	pn_sock_init();
 	err = sock_register(&phonet_proto_family);
 	if (err) {
 		printk(KERN_ALERT
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index ef5c75c..67f072e 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -159,11 +159,9 @@
 static int pn_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 {
 	int err = sock_queue_rcv_skb(sk, skb);
-	if (err < 0) {
+
+	if (err < 0)
 		kfree_skb(skb);
-		if (err == -ENOMEM)
-			atomic_inc(&sk->sk_drops);
-	}
 	return err ? NET_RX_DROP : NET_RX_SUCCESS;
 }
 
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 5f32d21..b6356f3 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -360,8 +360,6 @@
 			err = sock_queue_rcv_skb(sk, skb);
 			if (!err)
 				return 0;
-			if (err == -ENOMEM)
-				atomic_inc(&sk->sk_drops);
 			break;
 		}
 
@@ -716,8 +714,8 @@
 			return -EINVAL;
 
 		lock_sock(sk);
-		if (sock_flag(sk, SOCK_URGINLINE)
-		 && !skb_queue_empty(&pn->ctrlreq_queue))
+		if (sock_flag(sk, SOCK_URGINLINE) &&
+		    !skb_queue_empty(&pn->ctrlreq_queue))
 			answ = skb_peek(&pn->ctrlreq_queue)->len;
 		else if (!skb_queue_empty(&sk->sk_receive_queue))
 			answ = skb_peek(&sk->sk_receive_queue)->len;
@@ -845,7 +843,7 @@
 			struct msghdr *msg, size_t len)
 {
 	struct pep_sock *pn = pep_sk(sk);
-	struct sk_buff *skb = NULL;
+	struct sk_buff *skb;
 	long timeo;
 	int flags = msg->msg_flags;
 	int err, done;
@@ -853,6 +851,16 @@
 	if (msg->msg_flags & MSG_OOB || !(msg->msg_flags & MSG_EOR))
 		return -EOPNOTSUPP;
 
+	skb = sock_alloc_send_skb(sk, MAX_PNPIPE_HEADER + len,
+					flags & MSG_DONTWAIT, &err);
+	if (!skb)
+		return -ENOBUFS;
+
+	skb_reserve(skb, MAX_PHONET_HEADER + 3);
+	err = memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len);
+	if (err < 0)
+		goto outfree;
+
 	lock_sock(sk);
 	timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT);
 	if ((1 << sk->sk_state) & (TCPF_LISTEN|TCPF_CLOSE)) {
@@ -896,28 +904,13 @@
 			goto disabled;
 	}
 
-	if (!skb) {
-		skb = sock_alloc_send_skb(sk, MAX_PNPIPE_HEADER + len,
-						flags & MSG_DONTWAIT, &err);
-		if (skb == NULL)
-			goto out;
-		skb_reserve(skb, MAX_PHONET_HEADER + 3);
-
-		if (sk->sk_state != TCP_ESTABLISHED ||
-		    !atomic_read(&pn->tx_credits))
-			goto disabled; /* sock_alloc_send_skb might sleep */
-	}
-
-	err = memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len);
-	if (err < 0)
-		goto out;
-
 	err = pipe_skb_send(sk, skb);
 	if (err >= 0)
 		err = len; /* success! */
 	skb = NULL;
 out:
 	release_sock(sk);
+outfree:
 	kfree_skb(skb);
 	return err;
 }
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 5f42f30..bc4a33b 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -33,11 +33,17 @@
 #include <net/netns/generic.h>
 #include <net/phonet/pn_dev.h>
 
-struct phonet_net {
-	struct phonet_device_list pndevs;
+struct phonet_routes {
+	struct mutex		lock;
+	struct net_device	*table[64];
 };
 
-int phonet_net_id;
+struct phonet_net {
+	struct phonet_device_list pndevs;
+	struct phonet_routes routes;
+};
+
+int phonet_net_id __read_mostly;
 
 struct phonet_device_list *phonet_device_list(struct net *net)
 {
@@ -55,7 +61,8 @@
 	pnd->netdev = dev;
 	bitmap_zero(pnd->addrs, 64);
 
-	list_add(&pnd->list, &pndevs->list);
+	BUG_ON(!mutex_is_locked(&pndevs->lock));
+	list_add_rcu(&pnd->list, &pndevs->list);
 	return pnd;
 }
 
@@ -64,6 +71,7 @@
 	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
 	struct phonet_device *pnd;
 
+	BUG_ON(!mutex_is_locked(&pndevs->lock));
 	list_for_each_entry(pnd, &pndevs->list, list) {
 		if (pnd->netdev == dev)
 			return pnd;
@@ -71,6 +79,18 @@
 	return NULL;
 }
 
+static struct phonet_device *__phonet_get_rcu(struct net_device *dev)
+{
+	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
+	struct phonet_device *pnd;
+
+	list_for_each_entry_rcu(pnd, &pndevs->list, list) {
+		if (pnd->netdev == dev)
+			return pnd;
+	}
+	return NULL;
+}
+
 static void phonet_device_destroy(struct net_device *dev)
 {
 	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
@@ -78,11 +98,11 @@
 
 	ASSERT_RTNL();
 
-	spin_lock_bh(&pndevs->lock);
+	mutex_lock(&pndevs->lock);
 	pnd = __phonet_get(dev);
 	if (pnd)
-		list_del(&pnd->list);
-	spin_unlock_bh(&pndevs->lock);
+		list_del_rcu(&pnd->list);
+	mutex_unlock(&pndevs->lock);
 
 	if (pnd) {
 		u8 addr;
@@ -100,8 +120,8 @@
 	struct phonet_device *pnd;
 	struct net_device *dev = NULL;
 
-	spin_lock_bh(&pndevs->lock);
-	list_for_each_entry(pnd, &pndevs->list, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(pnd, &pndevs->list, list) {
 		dev = pnd->netdev;
 		BUG_ON(!dev);
 
@@ -112,7 +132,7 @@
 	}
 	if (dev)
 		dev_hold(dev);
-	spin_unlock_bh(&pndevs->lock);
+	rcu_read_unlock();
 	return dev;
 }
 
@@ -122,7 +142,7 @@
 	struct phonet_device *pnd;
 	int err = 0;
 
-	spin_lock_bh(&pndevs->lock);
+	mutex_lock(&pndevs->lock);
 	/* Find or create Phonet-specific device data */
 	pnd = __phonet_get(dev);
 	if (pnd == NULL)
@@ -131,7 +151,7 @@
 		err = -ENOMEM;
 	else if (test_and_set_bit(addr >> 2, pnd->addrs))
 		err = -EEXIST;
-	spin_unlock_bh(&pndevs->lock);
+	mutex_unlock(&pndevs->lock);
 	return err;
 }
 
@@ -141,36 +161,56 @@
 	struct phonet_device *pnd;
 	int err = 0;
 
-	spin_lock_bh(&pndevs->lock);
+	mutex_lock(&pndevs->lock);
 	pnd = __phonet_get(dev);
-	if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
+	if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs)) {
 		err = -EADDRNOTAVAIL;
-	else if (bitmap_empty(pnd->addrs, 64)) {
-		list_del(&pnd->list);
+		pnd = NULL;
+	} else if (bitmap_empty(pnd->addrs, 64))
+		list_del_rcu(&pnd->list);
+	else
+		pnd = NULL;
+	mutex_unlock(&pndevs->lock);
+
+	if (pnd) {
+		synchronize_rcu();
 		kfree(pnd);
 	}
-	spin_unlock_bh(&pndevs->lock);
 	return err;
 }
 
 /* Gets a source address toward a destination, through a interface. */
-u8 phonet_address_get(struct net_device *dev, u8 addr)
+u8 phonet_address_get(struct net_device *dev, u8 daddr)
 {
-	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
 	struct phonet_device *pnd;
+	u8 saddr;
 
-	spin_lock_bh(&pndevs->lock);
-	pnd = __phonet_get(dev);
+	rcu_read_lock();
+	pnd = __phonet_get_rcu(dev);
 	if (pnd) {
 		BUG_ON(bitmap_empty(pnd->addrs, 64));
 
 		/* Use same source address as destination, if possible */
-		if (!test_bit(addr >> 2, pnd->addrs))
-			addr = find_first_bit(pnd->addrs, 64) << 2;
+		if (test_bit(daddr >> 2, pnd->addrs))
+			saddr = daddr;
+		else
+			saddr = find_first_bit(pnd->addrs, 64) << 2;
 	} else
-		addr = PN_NO_ADDR;
-	spin_unlock_bh(&pndevs->lock);
-	return addr;
+		saddr = PN_NO_ADDR;
+	rcu_read_unlock();
+
+	if (saddr == PN_NO_ADDR) {
+		/* Fallback to another device */
+		struct net_device *def_dev;
+
+		def_dev = phonet_device_get(dev_net(dev));
+		if (def_dev) {
+			if (def_dev != dev)
+				saddr = phonet_address_get(def_dev, daddr);
+			dev_put(def_dev);
+		}
+	}
+	return saddr;
 }
 
 int phonet_address_lookup(struct net *net, u8 addr)
@@ -179,8 +219,8 @@
 	struct phonet_device *pnd;
 	int err = -EADDRNOTAVAIL;
 
-	spin_lock_bh(&pndevs->lock);
-	list_for_each_entry(pnd, &pndevs->list, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(pnd, &pndevs->list, list) {
 		/* Don't allow unregistering devices! */
 		if ((pnd->netdev->reg_state != NETREG_REGISTERED) ||
 				((pnd->netdev->flags & IFF_UP)) != IFF_UP)
@@ -192,7 +232,7 @@
 		}
 	}
 found:
-	spin_unlock_bh(&pndevs->lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -219,6 +259,32 @@
 	return 0;
 }
 
+static void phonet_route_autodel(struct net_device *dev)
+{
+	struct phonet_net *pnn = net_generic(dev_net(dev), phonet_net_id);
+	unsigned i;
+	DECLARE_BITMAP(deleted, 64);
+
+	/* Remove left-over Phonet routes */
+	bitmap_zero(deleted, 64);
+	mutex_lock(&pnn->routes.lock);
+	for (i = 0; i < 64; i++)
+		if (dev == pnn->routes.table[i]) {
+			rcu_assign_pointer(pnn->routes.table[i], NULL);
+			set_bit(i, deleted);
+		}
+	mutex_unlock(&pnn->routes.lock);
+
+	if (bitmap_empty(deleted, 64))
+		return; /* short-circuit RCU */
+	synchronize_rcu();
+	for (i = find_first_bit(deleted, 64); i < 64;
+			i = find_next_bit(deleted, 64, i + 1)) {
+		rtm_phonet_notify(RTM_DELROUTE, dev, i);
+		dev_put(dev);
+	}
+}
+
 /* notify Phonet of device events */
 static int phonet_device_notify(struct notifier_block *me, unsigned long what,
 				void *arg)
@@ -232,6 +298,7 @@
 		break;
 	case NETDEV_UNREGISTER:
 		phonet_device_destroy(dev);
+		phonet_route_autodel(dev);
 		break;
 	}
 	return 0;
@@ -246,18 +313,14 @@
 /* Per-namespace Phonet devices handling */
 static int phonet_init_net(struct net *net)
 {
-	struct phonet_net *pnn = kmalloc(sizeof(*pnn), GFP_KERNEL);
-	if (!pnn)
-		return -ENOMEM;
+	struct phonet_net *pnn = net_generic(net, phonet_net_id);
 
-	if (!proc_net_fops_create(net, "phonet", 0, &pn_sock_seq_fops)) {
-		kfree(pnn);
+	if (!proc_net_fops_create(net, "phonet", 0, &pn_sock_seq_fops))
 		return -ENOMEM;
-	}
 
 	INIT_LIST_HEAD(&pnn->pndevs.list);
-	spin_lock_init(&pnn->pndevs.lock);
-	net_assign_generic(net, phonet_net_id, pnn);
+	mutex_init(&pnn->pndevs.lock);
+	mutex_init(&pnn->routes.lock);
 	return 0;
 }
 
@@ -265,25 +328,35 @@
 {
 	struct phonet_net *pnn = net_generic(net, phonet_net_id);
 	struct net_device *dev;
+	unsigned i;
 
 	rtnl_lock();
 	for_each_netdev(net, dev)
 		phonet_device_destroy(dev);
+
+	for (i = 0; i < 64; i++) {
+		dev = pnn->routes.table[i];
+		if (dev) {
+			rtm_phonet_notify(RTM_DELROUTE, dev, i);
+			dev_put(dev);
+		}
+	}
 	rtnl_unlock();
 
 	proc_net_remove(net, "phonet");
-	kfree(pnn);
 }
 
 static struct pernet_operations phonet_net_ops = {
 	.init = phonet_init_net,
 	.exit = phonet_exit_net,
+	.id   = &phonet_net_id,
+	.size = sizeof(struct phonet_net),
 };
 
 /* Initialize Phonet devices list */
 int __init phonet_device_init(void)
 {
-	int err = register_pernet_gen_device(&phonet_net_id, &phonet_net_ops);
+	int err = register_pernet_device(&phonet_net_ops);
 	if (err)
 		return err;
 
@@ -298,5 +371,75 @@
 {
 	rtnl_unregister_all(PF_PHONET);
 	unregister_netdevice_notifier(&phonet_device_notifier);
-	unregister_pernet_gen_device(phonet_net_id, &phonet_net_ops);
+	unregister_pernet_device(&phonet_net_ops);
+}
+
+int phonet_route_add(struct net_device *dev, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(dev_net(dev), phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	int err = -EEXIST;
+
+	daddr = daddr >> 2;
+	mutex_lock(&routes->lock);
+	if (routes->table[daddr] == NULL) {
+		rcu_assign_pointer(routes->table[daddr], dev);
+		dev_hold(dev);
+		err = 0;
+	}
+	mutex_unlock(&routes->lock);
+	return err;
+}
+
+int phonet_route_del(struct net_device *dev, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(dev_net(dev), phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+
+	daddr = daddr >> 2;
+	mutex_lock(&routes->lock);
+	if (dev == routes->table[daddr])
+		rcu_assign_pointer(routes->table[daddr], NULL);
+	else
+		dev = NULL;
+	mutex_unlock(&routes->lock);
+
+	if (!dev)
+		return -ENOENT;
+	synchronize_rcu();
+	dev_put(dev);
+	return 0;
+}
+
+struct net_device *phonet_route_get(struct net *net, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(net, phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	struct net_device *dev;
+
+	ASSERT_RTNL(); /* no need to hold the device */
+
+	daddr >>= 2;
+	rcu_read_lock();
+	dev = rcu_dereference(routes->table[daddr]);
+	rcu_read_unlock();
+	return dev;
+}
+
+struct net_device *phonet_route_output(struct net *net, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(net, phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	struct net_device *dev;
+
+	daddr >>= 2;
+	rcu_read_lock();
+	dev = rcu_dereference(routes->table[daddr]);
+	if (dev)
+		dev_hold(dev);
+	rcu_read_unlock();
+
+	if (!dev)
+		dev = phonet_device_get(net); /* Default route */
+	return dev;
 }
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index d21fd35..2e6c7eb 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -29,6 +29,8 @@
 #include <net/sock.h>
 #include <net/phonet/pn_dev.h>
 
+/* Device address handling */
+
 static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
 		     u32 pid, u32 seq, int event);
 
@@ -51,8 +53,7 @@
 		    RTNLGRP_PHONET_IFADDR, NULL, GFP_KERNEL);
 	return;
 errout:
-	if (err < 0)
-		rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_IFADDR, err);
+	rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_IFADDR, err);
 }
 
 static const struct nla_policy ifa_phonet_policy[IFA_MAX+1] = {
@@ -130,8 +131,8 @@
 	int addr_idx = 0, addr_start_idx = cb->args[1];
 
 	pndevs = phonet_device_list(sock_net(skb->sk));
-	spin_lock_bh(&pndevs->lock);
-	list_for_each_entry(pnd, &pndevs->list, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(pnd, &pndevs->list, list) {
 		u8 addr;
 
 		if (dev_idx > dev_start_idx)
@@ -153,13 +154,137 @@
 	}
 
 out:
-	spin_unlock_bh(&pndevs->lock);
+	rcu_read_unlock();
 	cb->args[0] = dev_idx;
 	cb->args[1] = addr_idx;
 
 	return skb->len;
 }
 
+/* Routes handling */
+
+static int fill_route(struct sk_buff *skb, struct net_device *dev, u8 dst,
+			u32 pid, u32 seq, int event)
+{
+	struct rtmsg *rtm;
+	struct nlmsghdr *nlh;
+
+	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*rtm), 0);
+	if (nlh == NULL)
+		return -EMSGSIZE;
+
+	rtm = nlmsg_data(nlh);
+	rtm->rtm_family = AF_PHONET;
+	rtm->rtm_dst_len = 6;
+	rtm->rtm_src_len = 0;
+	rtm->rtm_tos = 0;
+	rtm->rtm_table = RT_TABLE_MAIN;
+	rtm->rtm_protocol = RTPROT_STATIC;
+	rtm->rtm_scope = RT_SCOPE_UNIVERSE;
+	rtm->rtm_type = RTN_UNICAST;
+	rtm->rtm_flags = 0;
+	NLA_PUT_U8(skb, RTA_DST, dst);
+	NLA_PUT_U32(skb, RTA_OIF, dev->ifindex);
+	return nlmsg_end(skb, nlh);
+
+nla_put_failure:
+	nlmsg_cancel(skb, nlh);
+	return -EMSGSIZE;
+}
+
+void rtm_phonet_notify(int event, struct net_device *dev, u8 dst)
+{
+	struct sk_buff *skb;
+	int err = -ENOBUFS;
+
+	skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct ifaddrmsg)) +
+			nla_total_size(1) + nla_total_size(4), GFP_KERNEL);
+	if (skb == NULL)
+		goto errout;
+	err = fill_route(skb, dev, dst, 0, 0, event);
+	if (err < 0) {
+		WARN_ON(err == -EMSGSIZE);
+		kfree_skb(skb);
+		goto errout;
+	}
+	rtnl_notify(skb, dev_net(dev), 0,
+			  RTNLGRP_PHONET_ROUTE, NULL, GFP_KERNEL);
+	return;
+errout:
+	rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_ROUTE, err);
+}
+
+static const struct nla_policy rtm_phonet_policy[RTA_MAX+1] = {
+	[RTA_DST] = { .type = NLA_U8 },
+	[RTA_OIF] = { .type = NLA_U32 },
+};
+
+static int route_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *attr)
+{
+	struct net *net = sock_net(skb->sk);
+	struct nlattr *tb[RTA_MAX+1];
+	struct net_device *dev;
+	struct rtmsg *rtm;
+	int err;
+	u8 dst;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	ASSERT_RTNL();
+
+	err = nlmsg_parse(nlh, sizeof(*rtm), tb, RTA_MAX, rtm_phonet_policy);
+	if (err < 0)
+		return err;
+
+	rtm = nlmsg_data(nlh);
+	if (rtm->rtm_table != RT_TABLE_MAIN || rtm->rtm_type != RTN_UNICAST)
+		return -EINVAL;
+	if (tb[RTA_DST] == NULL || tb[RTA_OIF] == NULL)
+		return -EINVAL;
+	dst = nla_get_u8(tb[RTA_DST]);
+	if (dst & 3) /* Phonet addresses only have 6 high-order bits */
+		return -EINVAL;
+
+	dev = __dev_get_by_index(net, nla_get_u32(tb[RTA_OIF]));
+	if (dev == NULL)
+		return -ENODEV;
+
+	if (nlh->nlmsg_type == RTM_NEWROUTE)
+		err = phonet_route_add(dev, dst);
+	else
+		err = phonet_route_del(dev, dst);
+	if (!err)
+		rtm_phonet_notify(nlh->nlmsg_type, dev, dst);
+	return err;
+}
+
+static int route_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
+{
+	struct net *net = sock_net(skb->sk);
+	u8 addr, addr_idx = 0, addr_start_idx = cb->args[0];
+
+	for (addr = 0; addr < 64; addr++) {
+		struct net_device *dev;
+
+		dev = phonet_route_get(net, addr << 2);
+		if (!dev)
+			continue;
+
+		if (addr_idx++ < addr_start_idx)
+			continue;
+		if (fill_route(skb, dev, addr << 2, NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, RTM_NEWROUTE))
+			goto out;
+	}
+
+out:
+	cb->args[0] = addr_idx;
+	cb->args[1] = 0;
+
+	return skb->len;
+}
+
 int __init phonet_netlink_register(void)
 {
 	int err = __rtnl_register(PF_PHONET, RTM_NEWADDR, addr_doit, NULL);
@@ -169,5 +294,8 @@
 	/* Further __rtnl_register() cannot fail */
 	__rtnl_register(PF_PHONET, RTM_DELADDR, addr_doit, NULL);
 	__rtnl_register(PF_PHONET, RTM_GETADDR, NULL, getaddr_dumpit);
+	__rtnl_register(PF_PHONET, RTM_NEWROUTE, route_doit, NULL);
+	__rtnl_register(PF_PHONET, RTM_DELROUTE, route_doit, NULL);
+	__rtnl_register(PF_PHONET, RTM_GETROUTE, NULL, route_dumpit);
 	return 0;
 }
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index aa5b5a9..69c8b82 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -45,13 +45,28 @@
 	return 0;
 }
 
+#define PN_HASHSIZE	16
+#define PN_HASHMASK	(PN_HASHSIZE-1)
+
+
 static struct  {
-	struct hlist_head hlist;
+	struct hlist_head hlist[PN_HASHSIZE];
 	spinlock_t lock;
-} pnsocks = {
-	.hlist = HLIST_HEAD_INIT,
-	.lock = __SPIN_LOCK_UNLOCKED(pnsocks.lock),
-};
+} pnsocks;
+
+void __init pn_sock_init(void)
+{
+	unsigned i;
+
+	for (i = 0; i < PN_HASHSIZE; i++)
+		INIT_HLIST_HEAD(pnsocks.hlist + i);
+	spin_lock_init(&pnsocks.lock);
+}
+
+static struct hlist_head *pn_hash_list(u16 obj)
+{
+	return pnsocks.hlist + (obj & PN_HASHMASK);
+}
 
 /*
  * Find address based on socket address, match only certain fields.
@@ -64,10 +79,11 @@
 	struct sock *rval = NULL;
 	u16 obj = pn_sockaddr_get_object(spn);
 	u8 res = spn->spn_resource;
+	struct hlist_head *hlist = pn_hash_list(obj);
 
 	spin_lock_bh(&pnsocks.lock);
 
-	sk_for_each(sknode, node, &pnsocks.hlist) {
+	sk_for_each(sknode, node, hlist) {
 		struct pn_sock *pn = pn_sk(sknode);
 		BUG_ON(!pn->sobject); /* unbound socket */
 
@@ -82,8 +98,8 @@
 			if (pn->resource != res)
 				continue;
 		}
-		if (pn_addr(pn->sobject)
-		 && pn_addr(pn->sobject) != pn_addr(obj))
+		if (pn_addr(pn->sobject) &&
+		    pn_addr(pn->sobject) != pn_addr(obj))
 			continue;
 
 		rval = sknode;
@@ -94,13 +110,44 @@
 	spin_unlock_bh(&pnsocks.lock);
 
 	return rval;
+}
 
+/* Deliver a broadcast packet (only in bottom-half) */
+void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb)
+{
+	struct hlist_head *hlist = pnsocks.hlist;
+	unsigned h;
+
+	spin_lock(&pnsocks.lock);
+	for (h = 0; h < PN_HASHSIZE; h++) {
+		struct hlist_node *node;
+		struct sock *sknode;
+
+		sk_for_each(sknode, node, hlist) {
+			struct sk_buff *clone;
+
+			if (!net_eq(sock_net(sknode), net))
+				continue;
+			if (!sock_flag(sknode, SOCK_BROADCAST))
+				continue;
+
+			clone = skb_clone(skb, GFP_ATOMIC);
+			if (clone) {
+				sock_hold(sknode);
+				sk_receive_skb(sknode, clone, 0);
+			}
+		}
+		hlist++;
+	}
+	spin_unlock(&pnsocks.lock);
 }
 
 void pn_sock_hash(struct sock *sk)
 {
+	struct hlist_head *hlist = pn_hash_list(pn_sk(sk)->sobject);
+
 	spin_lock_bh(&pnsocks.lock);
-	sk_add_node(sk, &pnsocks.hlist);
+	sk_add_node(sk, hlist);
 	spin_unlock_bh(&pnsocks.lock);
 }
 EXPORT_SYMBOL(pn_sock_hash);
@@ -416,15 +463,20 @@
 static struct sock *pn_sock_get_idx(struct seq_file *seq, loff_t pos)
 {
 	struct net *net = seq_file_net(seq);
+	struct hlist_head *hlist = pnsocks.hlist;
 	struct hlist_node *node;
 	struct sock *sknode;
+	unsigned h;
 
-	sk_for_each(sknode, node, &pnsocks.hlist) {
-		if (!net_eq(net, sock_net(sknode)))
-			continue;
-		if (!pos)
-			return sknode;
-		pos--;
+	for (h = 0; h < PN_HASHSIZE; h++) {
+		sk_for_each(sknode, node, hlist) {
+			if (!net_eq(net, sock_net(sknode)))
+				continue;
+			if (!pos)
+				return sknode;
+			pos--;
+		}
+		hlist++;
 	}
 	return NULL;
 }
diff --git a/net/phonet/sysctl.c b/net/phonet/sysctl.c
index 2220f33..cea1c7d 100644
--- a/net/phonet/sysctl.c
+++ b/net/phonet/sysctl.c
@@ -84,20 +84,18 @@
 
 static struct ctl_table phonet_table[] = {
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "local_port_range",
 		.data		= &local_port_range,
 		.maxlen		= sizeof(local_port_range),
 		.mode		= 0644,
 		.proc_handler	= proc_local_port_range,
-		.strategy	= NULL,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path phonet_ctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "phonet", .ctl_name = CTL_UNNUMBERED, },
+	{ .procname = "net", },
+	{ .procname = "phonet", },
 	{ },
 };
 
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index 98e0538..853c52b 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -174,8 +174,8 @@
 			mask |= (POLLIN | POLLRDNORM);
 		spin_unlock(&rs->rs_lock);
 	}
-	if (!list_empty(&rs->rs_recv_queue)
-	 || !list_empty(&rs->rs_notify_queue))
+	if (!list_empty(&rs->rs_recv_queue) ||
+	    !list_empty(&rs->rs_notify_queue))
 		mask |= (POLLIN | POLLRDNORM);
 	if (rs->rs_snd_bytes < rds_sk_sndbuf(rs))
 		mask |= (POLLOUT | POLLWRNORM);
@@ -265,6 +265,9 @@
 	case RDS_GET_MR:
 		ret = rds_get_mr(rs, optval, optlen);
 		break;
+	case RDS_GET_MR_FOR_DEST:
+		ret = rds_get_mr_for_dest(rs, optval, optlen);
+		break;
 	case RDS_FREE_MR:
 		ret = rds_free_mr(rs, optval, optlen);
 		break;
@@ -305,8 +308,8 @@
 		if (len < sizeof(int))
 			ret = -EINVAL;
 		else
-		if (put_user(rs->rs_recverr, (int __user *) optval)
-		 || put_user(sizeof(int), optlen))
+		if (put_user(rs->rs_recverr, (int __user *) optval) ||
+		    put_user(sizeof(int), optlen))
 			ret = -EFAULT;
 		else
 			ret = 0;
@@ -407,7 +410,8 @@
 	return 0;
 }
 
-static int rds_create(struct net *net, struct socket *sock, int protocol)
+static int rds_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	struct sock *sk;
 
@@ -431,7 +435,7 @@
 	sock_put(rds_rs_to_sk(rs));
 }
 
-static struct net_proto_family rds_family_ops = {
+static const struct net_proto_family rds_family_ops = {
 	.family =	AF_RDS,
 	.create =	rds_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/rds/cong.c b/net/rds/cong.c
index dd2711d..6d06cac 100644
--- a/net/rds/cong.c
+++ b/net/rds/cong.c
@@ -218,6 +218,8 @@
 	spin_lock_irqsave(&rds_cong_lock, flags);
 
 	list_for_each_entry(conn, &map->m_conn_list, c_map_item) {
+		if (conn->c_loopback)
+			continue;
 		if (!test_and_set_bit(0, &conn->c_map_queued)) {
 			rds_stats_inc(s_cong_update_queued);
 			queue_delayed_work(rds_wq, &conn->c_send_w, 0);
diff --git a/net/rds/connection.c b/net/rds/connection.c
index cc8b568..278f607 100644
--- a/net/rds/connection.c
+++ b/net/rds/connection.c
@@ -133,10 +133,8 @@
 
 	spin_lock_irqsave(&rds_conn_lock, flags);
 	conn = rds_conn_lookup(head, laddr, faddr, trans);
-	if (conn
-	 && conn->c_loopback
-	 && conn->c_trans != &rds_loop_transport
-	 && !is_outgoing) {
+	if (conn && conn->c_loopback && conn->c_trans != &rds_loop_transport &&
+	    !is_outgoing) {
 		/* This is a looped back IB connection, and we're
 		 * called by the code handling the incoming connect.
 		 * We need a second connection object into which we
diff --git a/net/rds/ib.h b/net/rds/ib.h
index 1378b85..64df4e7 100644
--- a/net/rds/ib.h
+++ b/net/rds/ib.h
@@ -98,6 +98,7 @@
 	struct rds_ib_send_work *i_sends;
 
 	/* rx */
+	struct tasklet_struct	i_recv_tasklet;
 	struct mutex		i_recv_mutex;
 	struct rds_ib_work_ring	i_recv_ring;
 	struct rds_ib_incoming	*i_ibinc;
@@ -303,6 +304,7 @@
 int rds_ib_inc_copy_to_user(struct rds_incoming *inc, struct iovec *iov,
 			     size_t size);
 void rds_ib_recv_cq_comp_handler(struct ib_cq *cq, void *context);
+void rds_ib_recv_tasklet_fn(unsigned long data);
 void rds_ib_recv_init_ring(struct rds_ib_connection *ic);
 void rds_ib_recv_clear_ring(struct rds_ib_connection *ic);
 void rds_ib_recv_init_ack(struct rds_ib_connection *ic);
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index c2d372f..647cb8f 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -377,8 +377,8 @@
 	}
 
 	/* Even if len is crap *now* I still want to check it. -ASG */
-	if (event->param.conn.private_data_len < sizeof (*dp)
-	    || dp->dp_protocol_major == 0)
+	if (event->param.conn.private_data_len < sizeof (*dp) ||
+	    dp->dp_protocol_major == 0)
 		return RDS_PROTOCOL_3_0;
 
 	common = be16_to_cpu(dp->dp_protocol_minor_mask) & RDS_IB_SUPPORTED_PROTOCOLS;
@@ -694,6 +694,8 @@
 		return -ENOMEM;
 
 	INIT_LIST_HEAD(&ic->ib_node);
+	tasklet_init(&ic->i_recv_tasklet, rds_ib_recv_tasklet_fn,
+		     (unsigned long) ic);
 	mutex_init(&ic->i_recv_mutex);
 #ifndef KERNEL_HAS_ATOMIC64
 	spin_lock_init(&ic->i_ack_lock);
diff --git a/net/rds/ib_rdma.c b/net/rds/ib_rdma.c
index ef3ab5b..4b0da86 100644
--- a/net/rds/ib_rdma.c
+++ b/net/rds/ib_rdma.c
@@ -187,11 +187,8 @@
 	INIT_LIST_HEAD(list);
 	spin_unlock_irq(list_lock);
 
-	list_for_each_entry_safe(ic, _ic, &tmp_list, ib_node) {
-		if (ic->conn->c_passive)
-			rds_conn_destroy(ic->conn->c_passive);
+	list_for_each_entry_safe(ic, _ic, &tmp_list, ib_node)
 		rds_conn_destroy(ic->conn);
-	}
 }
 
 struct rds_ib_mr_pool *rds_ib_create_mr_pool(struct rds_ib_device *rds_ibdev)
@@ -573,8 +570,8 @@
 	spin_unlock_irqrestore(&pool->list_lock, flags);
 
 	/* If we've pinned too many pages, request a flush */
-	if (atomic_read(&pool->free_pinned) >= pool->max_free_pinned
-	 || atomic_read(&pool->dirty_count) >= pool->max_items / 10)
+	if (atomic_read(&pool->free_pinned) >= pool->max_free_pinned ||
+	    atomic_read(&pool->dirty_count) >= pool->max_items / 10)
 		queue_work(rds_wq, &pool->flush_worker);
 
 	if (invalidate) {
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index cd7a6cf..04dc0d3 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -143,15 +143,16 @@
 	int ret = -ENOMEM;
 
 	if (recv->r_ibinc == NULL) {
-		if (atomic_read(&rds_ib_allocation) >= rds_ib_sysctl_max_recv_allocation) {
+		if (!atomic_add_unless(&rds_ib_allocation, 1, rds_ib_sysctl_max_recv_allocation)) {
 			rds_ib_stats_inc(s_ib_rx_alloc_limit);
 			goto out;
 		}
 		recv->r_ibinc = kmem_cache_alloc(rds_ib_incoming_slab,
 						 kptr_gfp);
-		if (recv->r_ibinc == NULL)
+		if (recv->r_ibinc == NULL) {
+			atomic_dec(&rds_ib_allocation);
 			goto out;
-		atomic_inc(&rds_ib_allocation);
+		}
 		INIT_LIST_HEAD(&recv->r_ibinc->ii_frags);
 		rds_inc_init(&recv->r_ibinc->ii_inc, conn, conn->c_faddr);
 	}
@@ -229,8 +230,8 @@
 	int ret = 0;
 	u32 pos;
 
-	while ((prefill || rds_conn_up(conn))
-			&& rds_ib_ring_alloc(&ic->i_recv_ring, 1, &pos)) {
+	while ((prefill || rds_conn_up(conn)) &&
+	       rds_ib_ring_alloc(&ic->i_recv_ring, 1, &pos)) {
 		if (pos >= ic->i_recv_ring.w_nr) {
 			printk(KERN_NOTICE "Argh - ring alloc returned pos=%u\n",
 					pos);
@@ -770,10 +771,10 @@
 		hdr = &ibinc->ii_inc.i_hdr;
 		/* We can't just use memcmp here; fragments of a
 		 * single message may carry different ACKs */
-		if (hdr->h_sequence != ihdr->h_sequence
-		 || hdr->h_len != ihdr->h_len
-		 || hdr->h_sport != ihdr->h_sport
-		 || hdr->h_dport != ihdr->h_dport) {
+		if (hdr->h_sequence != ihdr->h_sequence ||
+		    hdr->h_len != ihdr->h_len ||
+		    hdr->h_sport != ihdr->h_sport ||
+		    hdr->h_dport != ihdr->h_dport) {
 			rds_ib_conn_error(conn,
 				"fragment header mismatch; forcing reconnect\n");
 			return;
@@ -824,17 +825,22 @@
 {
 	struct rds_connection *conn = context;
 	struct rds_ib_connection *ic = conn->c_transport_data;
-	struct ib_wc wc;
-	struct rds_ib_ack_state state = { 0, };
-	struct rds_ib_recv_work *recv;
 
 	rdsdebug("conn %p cq %p\n", conn, cq);
 
 	rds_ib_stats_inc(s_ib_rx_cq_call);
 
-	ib_req_notify_cq(cq, IB_CQ_SOLICITED);
+	tasklet_schedule(&ic->i_recv_tasklet);
+}
 
-	while (ib_poll_cq(cq, 1, &wc) > 0) {
+static inline void rds_poll_cq(struct rds_ib_connection *ic,
+			       struct rds_ib_ack_state *state)
+{
+	struct rds_connection *conn = ic->conn;
+	struct ib_wc wc;
+	struct rds_ib_recv_work *recv;
+
+	while (ib_poll_cq(ic->i_recv_cq, 1, &wc) > 0) {
 		rdsdebug("wc wr_id 0x%llx status %u byte_len %u imm_data %u\n",
 			 (unsigned long long)wc.wr_id, wc.status, wc.byte_len,
 			 be32_to_cpu(wc.ex.imm_data));
@@ -852,7 +858,7 @@
 		if (rds_conn_up(conn) || rds_conn_connecting(conn)) {
 			/* We expect errors as the qp is drained during shutdown */
 			if (wc.status == IB_WC_SUCCESS) {
-				rds_ib_process_recv(conn, recv, wc.byte_len, &state);
+				rds_ib_process_recv(conn, recv, wc.byte_len, state);
 			} else {
 				rds_ib_conn_error(conn, "recv completion on "
 				       "%pI4 had status %u, disconnecting and "
@@ -863,6 +869,17 @@
 
 		rds_ib_ring_free(&ic->i_recv_ring, 1);
 	}
+}
+
+void rds_ib_recv_tasklet_fn(unsigned long data)
+{
+	struct rds_ib_connection *ic = (struct rds_ib_connection *) data;
+	struct rds_connection *conn = ic->conn;
+	struct rds_ib_ack_state state = { 0, };
+
+	rds_poll_cq(ic, &state);
+	ib_req_notify_cq(ic->i_recv_cq, IB_CQ_SOLICITED);
+	rds_poll_cq(ic, &state);
 
 	if (state.ack_next_valid)
 		rds_ib_set_ack(ic, state.ack_next, state.ack_required);
diff --git a/net/rds/ib_send.c b/net/rds/ib_send.c
index 23bf830..a10fab6 100644
--- a/net/rds/ib_send.c
+++ b/net/rds/ib_send.c
@@ -252,8 +252,8 @@
 
 		rds_ib_ring_free(&ic->i_send_ring, completed);
 
-		if (test_and_clear_bit(RDS_LL_SEND_FULL, &conn->c_flags)
-		 || test_bit(0, &conn->c_map_queued))
+		if (test_and_clear_bit(RDS_LL_SEND_FULL, &conn->c_flags) ||
+		    test_bit(0, &conn->c_map_queued))
 			queue_delayed_work(rds_wq, &conn->c_send_w, 0);
 
 		/* We expect errors as the qp is drained during shutdown */
diff --git a/net/rds/ib_sysctl.c b/net/rds/ib_sysctl.c
index 84b5ffcb..03f01cb 100644
--- a/net/rds/ib_sysctl.c
+++ b/net/rds/ib_sysctl.c
@@ -67,68 +67,62 @@
 
 ctl_table rds_ib_sysctl_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_send_wr",
 		.data		= &rds_ib_sysctl_max_send_wr,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_ib_sysctl_max_wr_min,
 		.extra2		= &rds_ib_sysctl_max_wr_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_recv_wr",
 		.data		= &rds_ib_sysctl_max_recv_wr,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_ib_sysctl_max_wr_min,
 		.extra2		= &rds_ib_sysctl_max_wr_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_unsignaled_wr",
 		.data		= &rds_ib_sysctl_max_unsig_wrs,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_ib_sysctl_max_unsig_wr_min,
 		.extra2		= &rds_ib_sysctl_max_unsig_wr_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_unsignaled_bytes",
 		.data		= &rds_ib_sysctl_max_unsig_bytes,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_ib_sysctl_max_unsig_bytes_min,
 		.extra2		= &rds_ib_sysctl_max_unsig_bytes_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_recv_allocation",
 		.data		= &rds_ib_sysctl_max_recv_allocation,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "flow_control",
 		.data		= &rds_ib_sysctl_flow_control,
 		.maxlen		= sizeof(rds_ib_sysctl_flow_control),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static struct ctl_path rds_ib_sysctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "rds", .ctl_name = CTL_UNNUMBERED, },
-	{ .procname = "ib", .ctl_name = CTL_UNNUMBERED, },
+	{ .procname = "net", },
+	{ .procname = "rds", },
+	{ .procname = "ib", },
 	{ }
 };
 
diff --git a/net/rds/iw.h b/net/rds/iw.h
index dd72b62..eef2f0c 100644
--- a/net/rds/iw.h
+++ b/net/rds/iw.h
@@ -119,6 +119,7 @@
 	struct rds_iw_send_work *i_sends;
 
 	/* rx */
+	struct tasklet_struct	i_recv_tasklet;
 	struct mutex		i_recv_mutex;
 	struct rds_iw_work_ring	i_recv_ring;
 	struct rds_iw_incoming	*i_iwinc;
@@ -330,6 +331,7 @@
 int rds_iw_inc_copy_to_user(struct rds_incoming *inc, struct iovec *iov,
 			     size_t size);
 void rds_iw_recv_cq_comp_handler(struct ib_cq *cq, void *context);
+void rds_iw_recv_tasklet_fn(unsigned long data);
 void rds_iw_recv_init_ring(struct rds_iw_connection *ic);
 void rds_iw_recv_clear_ring(struct rds_iw_connection *ic);
 void rds_iw_recv_init_ack(struct rds_iw_connection *ic);
diff --git a/net/rds/iw_cm.c b/net/rds/iw_cm.c
index a416b0d..394cf6b 100644
--- a/net/rds/iw_cm.c
+++ b/net/rds/iw_cm.c
@@ -696,6 +696,8 @@
 		return -ENOMEM;
 
 	INIT_LIST_HEAD(&ic->iw_node);
+	tasklet_init(&ic->i_recv_tasklet, rds_iw_recv_tasklet_fn,
+		     (unsigned long) ic);
 	mutex_init(&ic->i_recv_mutex);
 #ifndef KERNEL_HAS_ATOMIC64
 	spin_lock_init(&ic->i_ack_lock);
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index de4a1b1..9eda11c 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -245,11 +245,8 @@
 	INIT_LIST_HEAD(list);
 	spin_unlock_irq(list_lock);
 
-	list_for_each_entry_safe(ic, _ic, &tmp_list, iw_node) {
-		if (ic->conn->c_passive)
-			rds_conn_destroy(ic->conn->c_passive);
+	list_for_each_entry_safe(ic, _ic, &tmp_list, iw_node)
 		rds_conn_destroy(ic->conn);
-	}
 }
 
 static void rds_iw_set_scatterlist(struct rds_iw_scatterlist *sg,
@@ -576,8 +573,8 @@
 	rds_iw_free_fastreg(pool, ibmr);
 
 	/* If we've pinned too many pages, request a flush */
-	if (atomic_read(&pool->free_pinned) >= pool->max_free_pinned
-	 || atomic_read(&pool->dirty_count) >= pool->max_items / 10)
+	if (atomic_read(&pool->free_pinned) >= pool->max_free_pinned ||
+	    atomic_read(&pool->dirty_count) >= pool->max_items / 10)
 		queue_work(rds_wq, &pool->flush_worker);
 
 	if (invalidate) {
diff --git a/net/rds/iw_recv.c b/net/rds/iw_recv.c
index 8683f5f..54af7d6 100644
--- a/net/rds/iw_recv.c
+++ b/net/rds/iw_recv.c
@@ -143,15 +143,16 @@
 	int ret = -ENOMEM;
 
 	if (recv->r_iwinc == NULL) {
-		if (atomic_read(&rds_iw_allocation) >= rds_iw_sysctl_max_recv_allocation) {
+		if (!atomic_add_unless(&rds_iw_allocation, 1, rds_iw_sysctl_max_recv_allocation)) {
 			rds_iw_stats_inc(s_iw_rx_alloc_limit);
 			goto out;
 		}
 		recv->r_iwinc = kmem_cache_alloc(rds_iw_incoming_slab,
 						 kptr_gfp);
-		if (recv->r_iwinc == NULL)
+		if (recv->r_iwinc == NULL) {
+			atomic_dec(&rds_iw_allocation);
 			goto out;
-		atomic_inc(&rds_iw_allocation);
+		}
 		INIT_LIST_HEAD(&recv->r_iwinc->ii_frags);
 		rds_inc_init(&recv->r_iwinc->ii_inc, conn, conn->c_faddr);
 	}
@@ -229,8 +230,8 @@
 	int ret = 0;
 	u32 pos;
 
-	while ((prefill || rds_conn_up(conn))
-			&& rds_iw_ring_alloc(&ic->i_recv_ring, 1, &pos)) {
+	while ((prefill || rds_conn_up(conn)) &&
+	       rds_iw_ring_alloc(&ic->i_recv_ring, 1, &pos)) {
 		if (pos >= ic->i_recv_ring.w_nr) {
 			printk(KERN_NOTICE "Argh - ring alloc returned pos=%u\n",
 					pos);
@@ -729,10 +730,10 @@
 		hdr = &iwinc->ii_inc.i_hdr;
 		/* We can't just use memcmp here; fragments of a
 		 * single message may carry different ACKs */
-		if (hdr->h_sequence != ihdr->h_sequence
-		 || hdr->h_len != ihdr->h_len
-		 || hdr->h_sport != ihdr->h_sport
-		 || hdr->h_dport != ihdr->h_dport) {
+		if (hdr->h_sequence != ihdr->h_sequence ||
+		    hdr->h_len != ihdr->h_len ||
+		    hdr->h_sport != ihdr->h_sport ||
+		    hdr->h_dport != ihdr->h_dport) {
 			rds_iw_conn_error(conn,
 				"fragment header mismatch; forcing reconnect\n");
 			return;
@@ -783,17 +784,22 @@
 {
 	struct rds_connection *conn = context;
 	struct rds_iw_connection *ic = conn->c_transport_data;
-	struct ib_wc wc;
-	struct rds_iw_ack_state state = { 0, };
-	struct rds_iw_recv_work *recv;
 
 	rdsdebug("conn %p cq %p\n", conn, cq);
 
 	rds_iw_stats_inc(s_iw_rx_cq_call);
 
-	ib_req_notify_cq(cq, IB_CQ_SOLICITED);
+	tasklet_schedule(&ic->i_recv_tasklet);
+}
 
-	while (ib_poll_cq(cq, 1, &wc) > 0) {
+static inline void rds_poll_cq(struct rds_iw_connection *ic,
+			       struct rds_iw_ack_state *state)
+{
+	struct rds_connection *conn = ic->conn;
+	struct ib_wc wc;
+	struct rds_iw_recv_work *recv;
+
+	while (ib_poll_cq(ic->i_recv_cq, 1, &wc) > 0) {
 		rdsdebug("wc wr_id 0x%llx status %u byte_len %u imm_data %u\n",
 			 (unsigned long long)wc.wr_id, wc.status, wc.byte_len,
 			 be32_to_cpu(wc.ex.imm_data));
@@ -811,7 +817,7 @@
 		if (rds_conn_up(conn) || rds_conn_connecting(conn)) {
 			/* We expect errors as the qp is drained during shutdown */
 			if (wc.status == IB_WC_SUCCESS) {
-				rds_iw_process_recv(conn, recv, wc.byte_len, &state);
+				rds_iw_process_recv(conn, recv, wc.byte_len, state);
 			} else {
 				rds_iw_conn_error(conn, "recv completion on "
 				       "%pI4 had status %u, disconnecting and "
@@ -822,6 +828,17 @@
 
 		rds_iw_ring_free(&ic->i_recv_ring, 1);
 	}
+}
+
+void rds_iw_recv_tasklet_fn(unsigned long data)
+{
+	struct rds_iw_connection *ic = (struct rds_iw_connection *) data;
+	struct rds_connection *conn = ic->conn;
+	struct rds_iw_ack_state state = { 0, };
+
+	rds_poll_cq(ic, &state);
+	ib_req_notify_cq(ic->i_recv_cq, IB_CQ_SOLICITED);
+	rds_poll_cq(ic, &state);
 
 	if (state.ack_next_valid)
 		rds_iw_set_ack(ic, state.ack_next, state.ack_required);
diff --git a/net/rds/iw_send.c b/net/rds/iw_send.c
index 1f5abe3..1379e9d 100644
--- a/net/rds/iw_send.c
+++ b/net/rds/iw_send.c
@@ -288,8 +288,8 @@
 
 		rds_iw_ring_free(&ic->i_send_ring, completed);
 
-		if (test_and_clear_bit(RDS_LL_SEND_FULL, &conn->c_flags)
-		 || test_bit(0, &conn->c_map_queued))
+		if (test_and_clear_bit(RDS_LL_SEND_FULL, &conn->c_flags) ||
+		    test_bit(0, &conn->c_map_queued))
 			queue_delayed_work(rds_wq, &conn->c_send_w, 0);
 
 		/* We expect errors as the qp is drained during shutdown */
@@ -519,8 +519,7 @@
 	BUG_ON(hdr_off != 0 && hdr_off != sizeof(struct rds_header));
 
 	/* Fastreg support */
-	if (rds_rdma_cookie_key(rm->m_rdma_cookie)
-	 && !ic->i_fastreg_posted) {
+	if (rds_rdma_cookie_key(rm->m_rdma_cookie) && !ic->i_fastreg_posted) {
 		ret = -EAGAIN;
 		goto out;
 	}
diff --git a/net/rds/iw_sysctl.c b/net/rds/iw_sysctl.c
index 9590678..1c4428a 100644
--- a/net/rds/iw_sysctl.c
+++ b/net/rds/iw_sysctl.c
@@ -57,68 +57,62 @@
 
 ctl_table rds_iw_sysctl_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_send_wr",
 		.data		= &rds_iw_sysctl_max_send_wr,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_iw_sysctl_max_wr_min,
 		.extra2		= &rds_iw_sysctl_max_wr_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_recv_wr",
 		.data		= &rds_iw_sysctl_max_recv_wr,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_iw_sysctl_max_wr_min,
 		.extra2		= &rds_iw_sysctl_max_wr_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_unsignaled_wr",
 		.data		= &rds_iw_sysctl_max_unsig_wrs,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_iw_sysctl_max_unsig_wr_min,
 		.extra2		= &rds_iw_sysctl_max_unsig_wr_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_unsignaled_bytes",
 		.data		= &rds_iw_sysctl_max_unsig_bytes,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 		.extra1		= &rds_iw_sysctl_max_unsig_bytes_min,
 		.extra2		= &rds_iw_sysctl_max_unsig_bytes_max,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "max_recv_allocation",
 		.data		= &rds_iw_sysctl_max_recv_allocation,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_minmax,
+		.proc_handler   = proc_doulongvec_minmax,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "flow_control",
 		.data		= &rds_iw_sysctl_flow_control,
 		.maxlen		= sizeof(rds_iw_sysctl_flow_control),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static struct ctl_path rds_iw_sysctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "rds", .ctl_name = CTL_UNNUMBERED, },
-	{ .procname = "iw", .ctl_name = CTL_UNNUMBERED, },
+	{ .procname = "net", },
+	{ .procname = "rds", },
+	{ .procname = "iw", },
 	{ }
 };
 
diff --git a/net/rds/message.c b/net/rds/message.c
index ca50a8e..73e600f 100644
--- a/net/rds/message.c
+++ b/net/rds/message.c
@@ -122,8 +122,7 @@
 	if (hdr->h_exthdr[0] != RDS_EXTHDR_NONE)
 		return 0;
 
-	if (type >= __RDS_EXTHDR_MAX
-	 || len != rds_exthdr_size[type])
+	if (type >= __RDS_EXTHDR_MAX || len != rds_exthdr_size[type])
 		return 0;
 
 	if (ext_len >= RDS_HEADER_EXT_SPACE)
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index 8dc83d2..4c64daa 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -317,6 +317,30 @@
 	return __rds_rdma_map(rs, &args, NULL, NULL);
 }
 
+int rds_get_mr_for_dest(struct rds_sock *rs, char __user *optval, int optlen)
+{
+	struct rds_get_mr_for_dest_args args;
+	struct rds_get_mr_args new_args;
+
+	if (optlen != sizeof(struct rds_get_mr_for_dest_args))
+		return -EINVAL;
+
+	if (copy_from_user(&args, (struct rds_get_mr_for_dest_args __user *)optval,
+			   sizeof(struct rds_get_mr_for_dest_args)))
+		return -EFAULT;
+
+	/*
+	 * Initially, just behave like get_mr().
+	 * TODO: Implement get_mr as wrapper around this
+	 *	 and deprecate it.
+	 */
+	new_args.vec = args.vec;
+	new_args.cookie_addr = args.cookie_addr;
+	new_args.flags = args.flags;
+
+	return __rds_rdma_map(rs, &new_args, NULL, NULL);
+}
+
 /*
  * Free the MR indicated by the given R_Key
  */
@@ -607,8 +631,8 @@
 {
 	struct rds_rdma_op *op;
 
-	if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct rds_rdma_args))
-	 || rm->m_rdma_op != NULL)
+	if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct rds_rdma_args)) ||
+	    rm->m_rdma_op != NULL)
 		return -EINVAL;
 
 	op = rds_rdma_prepare(rs, CMSG_DATA(cmsg));
@@ -631,8 +655,8 @@
 	u32 r_key;
 	int err = 0;
 
-	if (cmsg->cmsg_len < CMSG_LEN(sizeof(rds_rdma_cookie_t))
-	 || rm->m_rdma_cookie != 0)
+	if (cmsg->cmsg_len < CMSG_LEN(sizeof(rds_rdma_cookie_t)) ||
+	    rm->m_rdma_cookie != 0)
 		return -EINVAL;
 
 	memcpy(&rm->m_rdma_cookie, CMSG_DATA(cmsg), sizeof(rm->m_rdma_cookie));
@@ -668,8 +692,8 @@
 int rds_cmsg_rdma_map(struct rds_sock *rs, struct rds_message *rm,
 			  struct cmsghdr *cmsg)
 {
-	if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct rds_get_mr_args))
-	 || rm->m_rdma_cookie != 0)
+	if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct rds_get_mr_args)) ||
+	    rm->m_rdma_cookie != 0)
 		return -EINVAL;
 
 	return __rds_rdma_map(rs, CMSG_DATA(cmsg), &rm->m_rdma_cookie, &rm->m_rdma_mr);
diff --git a/net/rds/rdma.h b/net/rds/rdma.h
index 4255120..909c398 100644
--- a/net/rds/rdma.h
+++ b/net/rds/rdma.h
@@ -61,6 +61,7 @@
 }
 
 int rds_get_mr(struct rds_sock *rs, char __user *optval, int optlen);
+int rds_get_mr_for_dest(struct rds_sock *rs, char __user *optval, int optlen);
 int rds_free_mr(struct rds_sock *rs, char __user *optval, int optlen);
 void rds_rdma_drop_keys(struct rds_sock *rs);
 int rds_cmsg_rdma_args(struct rds_sock *rs, struct rds_message *rm,
diff --git a/net/rds/recv.c b/net/rds/recv.c
index fdff33c..b426d67 100644
--- a/net/rds/recv.c
+++ b/net/rds/recv.c
@@ -195,8 +195,8 @@
 	 * XXX we could spend more on the wire to get more robust failure
 	 * detection, arguably worth it to avoid data corruption.
 	 */
-	if (be64_to_cpu(inc->i_hdr.h_sequence) < conn->c_next_rx_seq
-	 && (inc->i_hdr.h_flags & RDS_FLAG_RETRANSMITTED)) {
+	if (be64_to_cpu(inc->i_hdr.h_sequence) < conn->c_next_rx_seq &&
+	    (inc->i_hdr.h_flags & RDS_FLAG_RETRANSMITTED)) {
 		rds_stats_inc(s_recv_drop_old_seq);
 		goto out;
 	}
@@ -432,10 +432,9 @@
 			}
 
 			timeo = wait_event_interruptible_timeout(*sk->sk_sleep,
-						(!list_empty(&rs->rs_notify_queue)
-						|| rs->rs_cong_notify
-						|| rds_next_incoming(rs, &inc)),
-						timeo);
+					(!list_empty(&rs->rs_notify_queue) ||
+					 rs->rs_cong_notify ||
+					 rds_next_incoming(rs, &inc)), timeo);
 			rdsdebug("recvmsg woke inc %p timeo %ld\n", inc,
 				 timeo);
 			if (timeo > 0 || timeo == MAX_SCHEDULE_TIMEOUT)
diff --git a/net/rds/send.c b/net/rds/send.c
index 28c88ff..b2fccfc 100644
--- a/net/rds/send.c
+++ b/net/rds/send.c
@@ -235,8 +235,8 @@
 			 * connection.
 			 * Therefore, we never retransmit messages with RDMA ops.
 			 */
-			if (rm->m_rdma_op
-			 && test_bit(RDS_MSG_RETRANSMITTED, &rm->m_flags)) {
+			if (rm->m_rdma_op &&
+			    test_bit(RDS_MSG_RETRANSMITTED, &rm->m_flags)) {
 				spin_lock_irqsave(&conn->c_lock, flags);
 				if (test_and_clear_bit(RDS_MSG_ON_CONN, &rm->m_flags))
 					list_move(&rm->m_conn_item, &to_be_dropped);
@@ -247,8 +247,8 @@
 
 			/* Require an ACK every once in a while */
 			len = ntohl(rm->m_inc.i_hdr.h_len);
-			if (conn->c_unacked_packets == 0
-			 || conn->c_unacked_bytes < len) {
+			if (conn->c_unacked_packets == 0 ||
+			    conn->c_unacked_bytes < len) {
 				__set_bit(RDS_MSG_ACK_REQUIRED, &rm->m_flags);
 
 				conn->c_unacked_packets = rds_sysctl_max_unacked_packets;
@@ -418,8 +418,8 @@
 	spin_lock(&rm->m_rs_lock);
 
 	ro = rm->m_rdma_op;
-	if (test_bit(RDS_MSG_ON_SOCK, &rm->m_flags)
-	 && ro && ro->r_notify && ro->r_notifier) {
+	if (test_bit(RDS_MSG_ON_SOCK, &rm->m_flags) &&
+	    ro && ro->r_notify && ro->r_notifier) {
 		notifier = ro->r_notifier;
 		rs = rm->m_rs;
 		sock_hold(rds_rs_to_sk(rs));
@@ -549,8 +549,7 @@
 			list_del_init(&rm->m_sock_item);
 			rds_send_sndbuf_remove(rs, rm);
 
-			if (ro && ro->r_notifier
-			   && (status || ro->r_notify)) {
+			if (ro && ro->r_notifier && (status || ro->r_notify)) {
 				notifier = ro->r_notifier;
 				list_add_tail(&notifier->n_list,
 						&rs->rs_notify_queue);
@@ -877,8 +876,8 @@
 	if (ret)
 		goto out;
 
-	if ((rm->m_rdma_cookie || rm->m_rdma_op)
-	 && conn->c_trans->xmit_rdma == NULL) {
+	if ((rm->m_rdma_cookie || rm->m_rdma_op) &&
+	    conn->c_trans->xmit_rdma == NULL) {
 		if (printk_ratelimit())
 			printk(KERN_NOTICE "rdma_op %p conn xmit_rdma %p\n",
 				rm->m_rdma_op, conn->c_trans->xmit_rdma);
@@ -890,8 +889,8 @@
 	 * have scheduled a delayed reconnect however - in this case
 	 * we should not interfere.
 	 */
-	if (rds_conn_state(conn) == RDS_CONN_DOWN
-	 && !test_and_set_bit(RDS_RECONNECT_PENDING, &conn->c_flags))
+	if (rds_conn_state(conn) == RDS_CONN_DOWN &&
+	    !test_and_set_bit(RDS_RECONNECT_PENDING, &conn->c_flags))
 		queue_delayed_work(rds_wq, &conn->c_conn_w, 0);
 
 	ret = rds_cong_wait(conn->c_fcong, dport, nonblock, rs);
@@ -973,8 +972,8 @@
 	 * have scheduled a delayed reconnect however - in this case
 	 * we should not interfere.
 	 */
-	if (rds_conn_state(conn) == RDS_CONN_DOWN
-	 && !test_and_set_bit(RDS_RECONNECT_PENDING, &conn->c_flags))
+	if (rds_conn_state(conn) == RDS_CONN_DOWN &&
+	    !test_and_set_bit(RDS_RECONNECT_PENDING, &conn->c_flags))
 		queue_delayed_work(rds_wq, &conn->c_conn_w, 0);
 
 	ret = rds_cong_wait(conn->c_fcong, dport, 1, NULL);
diff --git a/net/rds/sysctl.c b/net/rds/sysctl.c
index 307dc5c..7829a20 100644
--- a/net/rds/sysctl.c
+++ b/net/rds/sysctl.c
@@ -51,55 +51,50 @@
 
 static ctl_table rds_sysctl_rds_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "reconnect_min_delay_ms",
 		.data		= &rds_sysctl_reconnect_min_jiffies,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_ms_jiffies_minmax,
+		.proc_handler   = proc_doulongvec_ms_jiffies_minmax,
 		.extra1		= &rds_sysctl_reconnect_min,
 		.extra2		= &rds_sysctl_reconnect_max_jiffies,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname       = "reconnect_max_delay_ms",
 		.data		= &rds_sysctl_reconnect_max_jiffies,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_doulongvec_ms_jiffies_minmax,
+		.proc_handler   = proc_doulongvec_ms_jiffies_minmax,
 		.extra1		= &rds_sysctl_reconnect_min_jiffies,
 		.extra2		= &rds_sysctl_reconnect_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "max_unacked_packets",
 		.data		= &rds_sysctl_max_unacked_packets,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_dointvec,
+		.proc_handler   = proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "max_unacked_bytes",
 		.data		= &rds_sysctl_max_unacked_bytes,
 		.maxlen         = sizeof(unsigned long),
 		.mode           = 0644,
-		.proc_handler   = &proc_dointvec,
+		.proc_handler   = proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "ping_enable",
 		.data		= &rds_sysctl_ping_enable,
 		.maxlen         = sizeof(int),
 		.mode           = 0644,
-		.proc_handler   = &proc_dointvec,
+		.proc_handler   = proc_dointvec,
 	},
-	{ .ctl_name = 0}
+	{ }
 };
 
 static struct ctl_path rds_sysctl_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "rds", .ctl_name = CTL_UNNUMBERED, },
+	{ .procname = "net", },
+	{ .procname = "rds", },
 	{ }
 };
 
diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c
index 24b743e..45474a4 100644
--- a/net/rds/tcp_listen.c
+++ b/net/rds/tcp_listen.c
@@ -67,11 +67,11 @@
 	inet = inet_sk(new_sock->sk);
 
 	rdsdebug("accepted tcp %u.%u.%u.%u:%u -> %u.%u.%u.%u:%u\n",
-		  NIPQUAD(inet->saddr), ntohs(inet->sport),
-		  NIPQUAD(inet->daddr), ntohs(inet->dport));
+		  NIPQUAD(inet->inet_saddr), ntohs(inet->inet_sport),
+		  NIPQUAD(inet->inet_daddr), ntohs(inet->inet_dport));
 
-	conn = rds_conn_create(inet->saddr, inet->daddr, &rds_tcp_transport,
-			       GFP_KERNEL);
+	conn = rds_conn_create(inet->inet_saddr, inet->inet_daddr,
+			       &rds_tcp_transport, GFP_KERNEL);
 	if (IS_ERR(conn)) {
 		ret = PTR_ERR(conn);
 		goto out;
diff --git a/net/rds/threads.c b/net/rds/threads.c
index dd7e0ca..00fa10e 100644
--- a/net/rds/threads.c
+++ b/net/rds/threads.c
@@ -170,8 +170,8 @@
 		 * handler is supposed to check for state DISCONNECTING
 		 */
 		mutex_lock(&conn->c_cm_lock);
-		if (!rds_conn_transition(conn, RDS_CONN_UP, RDS_CONN_DISCONNECTING)
-		 && !rds_conn_transition(conn, RDS_CONN_ERROR, RDS_CONN_DISCONNECTING)) {
+		if (!rds_conn_transition(conn, RDS_CONN_UP, RDS_CONN_DISCONNECTING) &&
+		    !rds_conn_transition(conn, RDS_CONN_ERROR, RDS_CONN_DISCONNECTING)) {
 			rds_conn_error(conn, "shutdown called in state %d\n",
 					atomic_read(&conn->c_state));
 			mutex_unlock(&conn->c_cm_lock);
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index ba2efb9..448e5a0 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -592,11 +592,13 @@
 		return "wwan";
 	case RFKILL_TYPE_GPS:
 		return "gps";
+	case RFKILL_TYPE_FM:
+		return "fm";
 	default:
 		BUG();
 	}
 
-	BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_GPS + 1);
+	BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1);
 }
 
 static ssize_t rfkill_type_show(struct device *dev,
@@ -1189,6 +1191,7 @@
 #endif
 
 static const struct file_operations rfkill_fops = {
+	.owner		= THIS_MODULE,
 	.open		= rfkill_fop_open,
 	.read		= rfkill_fop_read,
 	.write		= rfkill_fop_write,
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 502cce7..8feb9e5 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -512,12 +512,13 @@
 	.obj_size = sizeof(struct rose_sock),
 };
 
-static int rose_create(struct net *net, struct socket *sock, int protocol)
+static int rose_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	struct rose_sock *rose;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	if (sock->type != SOCK_SEQPACKET || protocol != 0)
@@ -1509,7 +1510,7 @@
 };
 #endif	/* CONFIG_PROC_FS */
 
-static struct net_proto_family rose_family_ops = {
+static const struct net_proto_family rose_family_ops = {
 	.family		=	PF_ROSE,
 	.create		=	rose_create,
 	.owner		=	THIS_MODULE,
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index f3e2198..795c4b0 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -77,8 +77,9 @@
 
 	rose_neigh = rose_neigh_list;
 	while (rose_neigh != NULL) {
-		if (ax25cmp(&rose_route->neighbour, &rose_neigh->callsign) == 0
-		    && rose_neigh->dev == dev)
+		if (ax25cmp(&rose_route->neighbour,
+			    &rose_neigh->callsign) == 0 &&
+		    rose_neigh->dev == dev)
 			break;
 		rose_neigh = rose_neigh->next;
 	}
@@ -311,8 +312,9 @@
 
 	rose_neigh = rose_neigh_list;
 	while (rose_neigh != NULL) {
-		if (ax25cmp(&rose_route->neighbour, &rose_neigh->callsign) == 0
-		    && rose_neigh->dev == dev)
+		if (ax25cmp(&rose_route->neighbour,
+			    &rose_neigh->callsign) == 0 &&
+		    rose_neigh->dev == dev)
 			break;
 		rose_neigh = rose_neigh->next;
 	}
@@ -600,13 +602,13 @@
 {
 	struct net_device *dev, *first = NULL;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_ROSE)
 			if (first == NULL || strncmp(dev->name, first->name, 3) < 0)
 				first = dev;
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	return first;
 }
@@ -618,8 +620,8 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_ROSE && rosecmp(addr, (rose_address *)dev->dev_addr) == 0) {
 			dev_hold(dev);
 			goto out;
@@ -627,7 +629,7 @@
 	}
 	dev = NULL;
 out:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 
@@ -635,14 +637,14 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_ROSE && rosecmp(addr, (rose_address *)dev->dev_addr) == 0)
 			goto out;
 	}
 	dev = NULL;
 out:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev != NULL;
 }
 
diff --git a/net/rose/sysctl_net_rose.c b/net/rose/sysctl_net_rose.c
index 3bfe504..df6d9da 100644
--- a/net/rose/sysctl_net_rose.c
+++ b/net/rose/sysctl_net_rose.c
@@ -26,121 +26,101 @@
 
 static ctl_table rose_table[] = {
 	{
-		.ctl_name	= NET_ROSE_RESTART_REQUEST_TIMEOUT,
 		.procname	= "restart_request_timeout",
 		.data		= &sysctl_rose_restart_request_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_timer,
 		.extra2		= &max_timer
 	},
 	{
-		.ctl_name	= NET_ROSE_CALL_REQUEST_TIMEOUT,
 		.procname	= "call_request_timeout",
 		.data		= &sysctl_rose_call_request_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_timer,
 		.extra2		= &max_timer
 	},
 	{
-		.ctl_name	= NET_ROSE_RESET_REQUEST_TIMEOUT,
 		.procname	= "reset_request_timeout",
 		.data		= &sysctl_rose_reset_request_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_timer,
 		.extra2		= &max_timer
 	},
 	{
-		.ctl_name	= NET_ROSE_CLEAR_REQUEST_TIMEOUT,
 		.procname	= "clear_request_timeout",
 		.data		= &sysctl_rose_clear_request_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_timer,
 		.extra2		= &max_timer
 	},
 	{
-		.ctl_name	= NET_ROSE_NO_ACTIVITY_TIMEOUT,
 		.procname	= "no_activity_timeout",
 		.data		= &sysctl_rose_no_activity_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_idle,
 		.extra2		= &max_idle
 	},
 	{
-		.ctl_name	= NET_ROSE_ACK_HOLD_BACK_TIMEOUT,
 		.procname	= "acknowledge_hold_back_timeout",
 		.data		= &sysctl_rose_ack_hold_back_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_timer,
 		.extra2		= &max_timer
 	},
 	{
-		.ctl_name	= NET_ROSE_ROUTING_CONTROL,
 		.procname	= "routing_control",
 		.data		= &sysctl_rose_routing_control,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_route,
 		.extra2		= &max_route
 	},
 	{
-		.ctl_name	= NET_ROSE_LINK_FAIL_TIMEOUT,
 		.procname	= "link_fail_timeout",
 		.data		= &sysctl_rose_link_fail_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_ftimer,
 		.extra2		= &max_ftimer
 	},
 	{
-		.ctl_name	= NET_ROSE_MAX_VCS,
 		.procname	= "maximum_virtual_circuits",
 		.data		= &sysctl_rose_maximum_vcs,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_maxvcs,
 		.extra2		= &max_maxvcs
 	},
 	{
-		.ctl_name	= NET_ROSE_WINDOW_SIZE,
 		.procname	= "window_size",
 		.data		= &sysctl_rose_window_size,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &min_window,
 		.extra2		= &max_window
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path rose_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "rose", .ctl_name = NET_ROSE, },
+	{ .procname = "net", },
+	{ .procname = "rose", },
 	{ }
 };
 
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index a86afce..287b1415 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -608,14 +608,15 @@
 /*
  * create an RxRPC socket
  */
-static int rxrpc_create(struct net *net, struct socket *sock, int protocol)
+static int rxrpc_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct rxrpc_sock *rx;
 	struct sock *sk;
 
 	_enter("%p,%d", sock, protocol);
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	/* we support transport protocol UDP only */
@@ -777,7 +778,7 @@
 	.max_header	= sizeof(struct rxrpc_header),
 };
 
-static struct net_proto_family rxrpc_family_ops = {
+static const struct net_proto_family rxrpc_family_ops = {
 	.family	= PF_RXRPC,
 	.create = rxrpc_create,
 	.owner	= THIS_MODULE,
diff --git a/net/rxrpc/ar-recvmsg.c b/net/rxrpc/ar-recvmsg.c
index a39bf97..60c2b94e 100644
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -146,7 +146,7 @@
 				memcpy(msg->msg_name,
 				       &call->conn->trans->peer->srx,
 				       sizeof(call->conn->trans->peer->srx));
-			sock_recv_timestamp(msg, &rx->sk, skb);
+			sock_recv_ts_and_drops(msg, &rx->sk, skb);
 		}
 
 		/* receive the message */
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 2dfb3e7..2a740035 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -618,7 +618,8 @@
 			goto errout;
 
 	if (gnet_stats_copy_basic(&d, &h->tcf_bstats) < 0 ||
-	    gnet_stats_copy_rate_est(&d, &h->tcf_rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(&d, &h->tcf_bstats,
+				     &h->tcf_rate_est) < 0 ||
 	    gnet_stats_copy_queue(&d, &h->tcf_qstats) < 0)
 		goto errout;
 
@@ -968,7 +969,7 @@
 	u32 pid = skb ? NETLINK_CB(skb).pid : 0;
 	int ret = 0, ovr = 0;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	ret = nlmsg_parse(n, sizeof(struct tcamsg), tca, TCA_ACT_MAX, NULL);
@@ -1051,7 +1052,7 @@
 	struct tcamsg *t = (struct tcamsg *) NLMSG_DATA(cb->nlh);
 	struct nlattr *kind = find_dump_kind(cb->nlh);
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	if (kind == NULL) {
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index b9aaab4..d329170 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -65,48 +65,53 @@
 	struct tc_mirred *parm;
 	struct tcf_mirred *m;
 	struct tcf_common *pc;
-	struct net_device *dev = NULL;
-	int ret = 0, err;
-	int ok_push = 0;
+	struct net_device *dev;
+	int ret, ok_push = 0;
 
 	if (nla == NULL)
 		return -EINVAL;
-
-	err = nla_parse_nested(tb, TCA_MIRRED_MAX, nla, mirred_policy);
-	if (err < 0)
-		return err;
-
+	ret = nla_parse_nested(tb, TCA_MIRRED_MAX, nla, mirred_policy);
+	if (ret < 0)
+		return ret;
 	if (tb[TCA_MIRRED_PARMS] == NULL)
 		return -EINVAL;
 	parm = nla_data(tb[TCA_MIRRED_PARMS]);
-
+	switch (parm->eaction) {
+	case TCA_EGRESS_MIRROR:
+	case TCA_EGRESS_REDIR:
+		break;
+	default:
+		return -EINVAL;
+	}
 	if (parm->ifindex) {
 		dev = __dev_get_by_index(&init_net, parm->ifindex);
 		if (dev == NULL)
 			return -ENODEV;
 		switch (dev->type) {
-			case ARPHRD_TUNNEL:
-			case ARPHRD_TUNNEL6:
-			case ARPHRD_SIT:
-			case ARPHRD_IPGRE:
-			case ARPHRD_VOID:
-			case ARPHRD_NONE:
-				ok_push = 0;
-				break;
-			default:
-				ok_push = 1;
-				break;
+		case ARPHRD_TUNNEL:
+		case ARPHRD_TUNNEL6:
+		case ARPHRD_SIT:
+		case ARPHRD_IPGRE:
+		case ARPHRD_VOID:
+		case ARPHRD_NONE:
+			ok_push = 0;
+			break;
+		default:
+			ok_push = 1;
+			break;
 		}
+	} else {
+		dev = NULL;
 	}
 
 	pc = tcf_hash_check(parm->index, a, bind, &mirred_hash_info);
 	if (!pc) {
-		if (!parm->ifindex)
+		if (dev == NULL)
 			return -EINVAL;
 		pc = tcf_hash_create(parm->index, est, a, sizeof(*m), bind,
 				     &mirred_idx_gen, &mirred_hash_info);
 		if (IS_ERR(pc))
-		    return PTR_ERR(pc);
+			return PTR_ERR(pc);
 		ret = ACT_P_CREATED;
 	} else {
 		if (!ovr) {
@@ -119,12 +124,12 @@
 	spin_lock_bh(&m->tcf_lock);
 	m->tcf_action = parm->action;
 	m->tcfm_eaction = parm->eaction;
-	if (parm->ifindex) {
+	if (dev != NULL) {
 		m->tcfm_ifindex = parm->ifindex;
 		if (ret != ACT_P_CREATED)
 			dev_put(m->tcfm_dev);
-		m->tcfm_dev = dev;
 		dev_hold(dev);
+		m->tcfm_dev = dev;
 		m->tcfm_ok_push = ok_push;
 	}
 	spin_unlock_bh(&m->tcf_lock);
@@ -148,57 +153,57 @@
 {
 	struct tcf_mirred *m = a->priv;
 	struct net_device *dev;
-	struct sk_buff *skb2 = NULL;
-	u32 at = G_TC_AT(skb->tc_verd);
+	struct sk_buff *skb2;
+	u32 at;
+	int retval, err = 1;
 
 	spin_lock(&m->tcf_lock);
-
-	dev = m->tcfm_dev;
 	m->tcf_tm.lastuse = jiffies;
 
-	if (!(dev->flags&IFF_UP) ) {
+	dev = m->tcfm_dev;
+	if (!(dev->flags & IFF_UP)) {
 		if (net_ratelimit())
 			printk("mirred to Houston: device %s is gone!\n",
 			       dev->name);
-bad_mirred:
-		if (skb2 != NULL)
-			kfree_skb(skb2);
-		m->tcf_qstats.overlimits++;
-		m->tcf_bstats.bytes += qdisc_pkt_len(skb);
-		m->tcf_bstats.packets++;
-		spin_unlock(&m->tcf_lock);
-		/* should we be asking for packet to be dropped?
-		 * may make sense for redirect case only
-		*/
-		return TC_ACT_SHOT;
+		goto out;
 	}
 
 	skb2 = skb_act_clone(skb, GFP_ATOMIC);
 	if (skb2 == NULL)
-		goto bad_mirred;
-	if (m->tcfm_eaction != TCA_EGRESS_MIRROR &&
-	    m->tcfm_eaction != TCA_EGRESS_REDIR) {
-		if (net_ratelimit())
-			printk("tcf_mirred unknown action %d\n",
-			       m->tcfm_eaction);
-		goto bad_mirred;
-	}
+		goto out;
 
 	m->tcf_bstats.bytes += qdisc_pkt_len(skb2);
 	m->tcf_bstats.packets++;
-	if (!(at & AT_EGRESS))
+	at = G_TC_AT(skb->tc_verd);
+	if (!(at & AT_EGRESS)) {
 		if (m->tcfm_ok_push)
 			skb_push(skb2, skb2->dev->hard_header_len);
+	}
 
 	/* mirror is always swallowed */
 	if (m->tcfm_eaction != TCA_EGRESS_MIRROR)
 		skb2->tc_verd = SET_TC_FROM(skb2->tc_verd, at);
 
 	skb2->dev = dev;
-	skb2->iif = skb->dev->ifindex;
+	skb2->skb_iif = skb->dev->ifindex;
 	dev_queue_xmit(skb2);
+	err = 0;
+
+out:
+	if (err) {
+		m->tcf_qstats.overlimits++;
+		m->tcf_bstats.bytes += qdisc_pkt_len(skb);
+		m->tcf_bstats.packets++;
+		/* should we be asking for packet to be dropped?
+		 * may make sense for redirect case only
+		 */
+		retval = TC_ACT_SHOT;
+	} else {
+		retval = m->tcf_action;
+	}
 	spin_unlock(&m->tcf_lock);
-	return m->tcf_action;
+
+	return retval;
 }
 
 static int tcf_mirred_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref)
diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c
index 4ab916b..e9607fe 100644
--- a/net/sched/act_skbedit.c
+++ b/net/sched/act_skbedit.c
@@ -54,6 +54,8 @@
 	if (d->flags & SKBEDIT_F_QUEUE_MAPPING &&
 	    skb->dev->real_num_tx_queues > d->queue_mapping)
 		skb_set_queue_mapping(skb, d->queue_mapping);
+	if (d->flags & SKBEDIT_F_MARK)
+		skb->mark = d->mark;
 
 	spin_unlock(&d->tcf_lock);
 	return d->tcf_action;
@@ -63,6 +65,7 @@
 	[TCA_SKBEDIT_PARMS]		= { .len = sizeof(struct tc_skbedit) },
 	[TCA_SKBEDIT_PRIORITY]		= { .len = sizeof(u32) },
 	[TCA_SKBEDIT_QUEUE_MAPPING]	= { .len = sizeof(u16) },
+	[TCA_SKBEDIT_MARK]		= { .len = sizeof(u32) },
 };
 
 static int tcf_skbedit_init(struct nlattr *nla, struct nlattr *est,
@@ -72,7 +75,7 @@
 	struct tc_skbedit *parm;
 	struct tcf_skbedit *d;
 	struct tcf_common *pc;
-	u32 flags = 0, *priority = NULL;
+	u32 flags = 0, *priority = NULL, *mark = NULL;
 	u16 *queue_mapping = NULL;
 	int ret = 0, err;
 
@@ -95,6 +98,12 @@
 		flags |= SKBEDIT_F_QUEUE_MAPPING;
 		queue_mapping = nla_data(tb[TCA_SKBEDIT_QUEUE_MAPPING]);
 	}
+
+	if (tb[TCA_SKBEDIT_MARK] != NULL) {
+		flags |= SKBEDIT_F_MARK;
+		mark = nla_data(tb[TCA_SKBEDIT_MARK]);
+	}
+
 	if (!flags)
 		return -EINVAL;
 
@@ -124,6 +133,9 @@
 		d->priority = *priority;
 	if (flags & SKBEDIT_F_QUEUE_MAPPING)
 		d->queue_mapping = *queue_mapping;
+	if (flags & SKBEDIT_F_MARK)
+		d->mark = *mark;
+
 	d->tcf_action = parm->action;
 
 	spin_unlock_bh(&d->tcf_lock);
@@ -161,6 +173,9 @@
 	if (d->flags & SKBEDIT_F_QUEUE_MAPPING)
 		NLA_PUT(skb, TCA_SKBEDIT_QUEUE_MAPPING,
 			sizeof(d->queue_mapping), &d->queue_mapping);
+	if (d->flags & SKBEDIT_F_MARK)
+		NLA_PUT(skb, TCA_SKBEDIT_MARK, sizeof(d->mark),
+			&d->mark);
 	t.install = jiffies_to_clock_t(jiffies - d->tcf_tm.install);
 	t.lastuse = jiffies_to_clock_t(jiffies - d->tcf_tm.lastuse);
 	t.expires = jiffies_to_clock_t(d->tcf_tm.expires);
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 7cf6c0f..3725d8f 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -137,7 +137,7 @@
 	int err;
 	int tp_created = 0;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 replay:
@@ -404,6 +404,7 @@
 			     a->cb->nlh->nlmsg_seq, NLM_F_MULTI, RTM_NEWTFILTER);
 }
 
+/* called with RTNL */
 static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(skb->sk);
@@ -417,12 +418,12 @@
 	const struct Qdisc_class_ops *cops;
 	struct tcf_dump_args arg;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	if (cb->nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*tcm)))
 		return skb->len;
-	if ((dev = dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
+	if ((dev = __dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
 		return skb->len;
 
 	if (!tcm->tcm_parent)
@@ -484,7 +485,6 @@
 	if (cl)
 		cops->put(q, cl);
 out:
-	dev_put(dev);
 	return skb->len;
 }
 
diff --git a/net/sched/cls_flow.c b/net/sched/cls_flow.c
index 9402a7f..e054c62 100644
--- a/net/sched/cls_flow.c
+++ b/net/sched/cls_flow.c
@@ -171,7 +171,7 @@
 
 static u32 flow_get_iif(const struct sk_buff *skb)
 {
-	return skb->iif;
+	return skb->skb_iif;
 }
 
 static u32 flow_get_priority(const struct sk_buff *skb)
diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h
index 7034ea4..dd9414e 100644
--- a/net/sched/cls_rsvp.h
+++ b/net/sched/cls_rsvp.h
@@ -170,21 +170,23 @@
 	for (s = sht[h1]; s; s = s->next) {
 		if (dst[RSVP_DST_LEN-1] == s->dst[RSVP_DST_LEN-1] &&
 		    protocol == s->protocol &&
-		    !(s->dpi.mask & (*(u32*)(xprt+s->dpi.offset)^s->dpi.key))
+		    !(s->dpi.mask &
+		      (*(u32*)(xprt+s->dpi.offset)^s->dpi.key)) &&
 #if RSVP_DST_LEN == 4
-		    && dst[0] == s->dst[0]
-		    && dst[1] == s->dst[1]
-		    && dst[2] == s->dst[2]
+		    dst[0] == s->dst[0] &&
+		    dst[1] == s->dst[1] &&
+		    dst[2] == s->dst[2] &&
 #endif
-		    && tunnelid == s->tunnelid) {
+		    tunnelid == s->tunnelid) {
 
 			for (f = s->ht[h2]; f; f = f->next) {
 				if (src[RSVP_DST_LEN-1] == f->src[RSVP_DST_LEN-1] &&
 				    !(f->spi.mask & (*(u32*)(xprt+f->spi.offset)^f->spi.key))
 #if RSVP_DST_LEN == 4
-				    && src[0] == f->src[0]
-				    && src[1] == f->src[1]
-				    && src[2] == f->src[2]
+				    &&
+				    src[0] == f->src[0] &&
+				    src[1] == f->src[1] &&
+				    src[2] == f->src[2]
 #endif
 				    ) {
 					*res = f->res;
@@ -493,13 +495,13 @@
 	for (sp = &data->ht[h1]; (s=*sp) != NULL; sp = &s->next) {
 		if (dst[RSVP_DST_LEN-1] == s->dst[RSVP_DST_LEN-1] &&
 		    pinfo && pinfo->protocol == s->protocol &&
-		    memcmp(&pinfo->dpi, &s->dpi, sizeof(s->dpi)) == 0
+		    memcmp(&pinfo->dpi, &s->dpi, sizeof(s->dpi)) == 0 &&
 #if RSVP_DST_LEN == 4
-		    && dst[0] == s->dst[0]
-		    && dst[1] == s->dst[1]
-		    && dst[2] == s->dst[2]
+		    dst[0] == s->dst[0] &&
+		    dst[1] == s->dst[1] &&
+		    dst[2] == s->dst[2] &&
 #endif
-		    && pinfo->tunnelid == s->tunnelid) {
+		    pinfo->tunnelid == s->tunnelid) {
 
 insert:
 			/* OK, we found appropriate session */
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index 18d85d2..24dce8b 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -303,17 +303,18 @@
 {
 	SKIP_NONLOCAL(skb);
 
-	 if (skb->sk->sk_bound_dev_if == 0) {
+	if (skb->sk->sk_bound_dev_if == 0) {
 		dst->value = (unsigned long) "any";
 		dst->len = 3;
-	 } else  {
+	} else {
 		struct net_device *dev;
 
-		dev = dev_get_by_index(&init_net, skb->sk->sk_bound_dev_if);
+		rcu_read_lock();
+		dev = dev_get_by_index_rcu(sock_net(skb->sk),
+					   skb->sk->sk_bound_dev_if);
 		*err = var_dev(dev, dst);
-		if (dev)
-			dev_put(dev);
-	 }
+		rcu_read_unlock();
+	}
 }
 
 META_COLLECTOR(int_sk_refcnt)
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 903e418..75fd1c6 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -947,7 +947,7 @@
 	struct Qdisc *p = NULL;
 	int err;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	if ((dev = __dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
@@ -1009,7 +1009,7 @@
 	struct Qdisc *q, *p;
 	int err;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 replay:
@@ -1179,7 +1179,7 @@
 		goto nla_put_failure;
 
 	if (gnet_stats_copy_basic(&d, &q->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(&d, &q->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(&d, &q->bstats, &q->rate_est) < 0 ||
 	    gnet_stats_copy_queue(&d, &q->qstats) < 0)
 		goto nla_put_failure;
 
@@ -1274,14 +1274,15 @@
 	int s_idx, s_q_idx;
 	struct net_device *dev;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	s_idx = cb->args[0];
 	s_q_idx = q_idx = cb->args[1];
-	read_lock(&dev_base_lock);
+
+	rcu_read_lock();
 	idx = 0;
-	for_each_netdev(&init_net, dev) {
+	for_each_netdev_rcu(&init_net, dev) {
 		struct netdev_queue *dev_queue;
 
 		if (idx < s_idx)
@@ -1302,7 +1303,7 @@
 	}
 
 done:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	cb->args[0] = idx;
 	cb->args[1] = q_idx;
@@ -1333,7 +1334,7 @@
 	u32 qid = TC_H_MAJ(clid);
 	int err;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EINVAL;
 
 	if ((dev = __dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
@@ -1575,7 +1576,7 @@
 	struct net_device *dev;
 	int t, s_t;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return 0;
 
 	if (cb->nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*tcm)))
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 5b132c4..3846d65 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1609,7 +1609,7 @@
 		cl->xstats.undertime = cl->undertime - q->now;
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qstats) < 0)
 		return -1;
 
diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c
index 5a888af..a65604f 100644
--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -280,7 +280,7 @@
 	}
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qdisc->qstats) < 0)
 		return -1;
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 4ae6aa5..5173c1e 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -119,32 +119,26 @@
 	spin_unlock(root_lock);
 
 	HARD_TX_LOCK(dev, txq, smp_processor_id());
-	if (!netif_tx_queue_stopped(txq) &&
-	    !netif_tx_queue_frozen(txq))
+	if (!netif_tx_queue_stopped(txq) && !netif_tx_queue_frozen(txq))
 		ret = dev_hard_start_xmit(skb, dev, txq);
+
 	HARD_TX_UNLOCK(dev, txq);
 
 	spin_lock(root_lock);
 
-	switch (ret) {
-	case NETDEV_TX_OK:
-		/* Driver sent out skb successfully */
+	if (dev_xmit_complete(ret)) {
+		/* Driver sent out skb successfully or skb was consumed */
 		ret = qdisc_qlen(q);
-		break;
-
-	case NETDEV_TX_LOCKED:
+	} else if (ret == NETDEV_TX_LOCKED) {
 		/* Driver try lock failed */
 		ret = handle_dev_cpu_collision(skb, txq, q);
-		break;
-
-	default:
+	} else {
 		/* Driver returned NETDEV_TX_BUSY - requeue skb */
 		if (unlikely (ret != NETDEV_TX_BUSY && net_ratelimit()))
 			printk(KERN_WARNING "BUG %s code %d qlen %d\n",
 			       dev->name, ret, q->q.qlen);
 
 		ret = dev_requeue_skb(skb, q);
-		break;
 	}
 
 	if (ret && (netif_tx_queue_stopped(txq) ||
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 2c5c76b..b38b39c 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1375,7 +1375,7 @@
 	xstats.rtwork  = cl->cl_cumul;
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qstats) < 0)
 		return -1;
 
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 85acab9..508cf5f 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1105,7 +1105,7 @@
 	cl->xstats.ctokens = cl->ctokens;
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, NULL, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qstats) < 0)
 		return -1;
 
@@ -1344,8 +1344,8 @@
 		};
 
 		/* check for valid classid */
-		if (!classid || TC_H_MAJ(classid ^ sch->handle)
-		    || htb_find(classid, sch))
+		if (!classid || TC_H_MAJ(classid ^ sch->handle) ||
+		    htb_find(classid, sch))
 			goto failure;
 
 		/* check maximal depth */
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index 2b88295..d8b10e0 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -199,9 +199,9 @@
 	 * do it now in software before we mangle it.
 	 */
 	if (q->corrupt && q->corrupt >= get_crandom(&q->corrupt_cor)) {
-		if (!(skb = skb_unshare(skb, GFP_ATOMIC))
-		    || (skb->ip_summed == CHECKSUM_PARTIAL
-			&& skb_checksum_help(skb))) {
+		if (!(skb = skb_unshare(skb, GFP_ATOMIC)) ||
+		    (skb->ip_summed == CHECKSUM_PARTIAL &&
+		     skb_checksum_help(skb))) {
 			sch->qstats.drops++;
 			return NET_XMIT_DROP;
 		}
@@ -210,9 +210,9 @@
 	}
 
 	cb = netem_skb_cb(skb);
-	if (q->gap == 0 		/* not doing reordering */
-	    || q->counter < q->gap 	/* inside last reordering gap */
-	    || q->reorder < get_crandom(&q->reorder_cor)) {
+	if (q->gap == 0 || 		/* not doing reordering */
+	    q->counter < q->gap || 	/* inside last reordering gap */
+	    q->reorder < get_crandom(&q->reorder_cor)) {
 		psched_time_t now;
 		psched_tdiff_t delay;
 
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 5a002c2..db69637 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -190,10 +190,13 @@
 
 	if (m->slaves) {
 		if (m->dev->flags & IFF_UP) {
-			if ((m->dev->flags&IFF_POINTOPOINT && !(dev->flags&IFF_POINTOPOINT))
-			    || (m->dev->flags&IFF_BROADCAST && !(dev->flags&IFF_BROADCAST))
-			    || (m->dev->flags&IFF_MULTICAST && !(dev->flags&IFF_MULTICAST))
-			    || dev->mtu < m->dev->mtu)
+			if ((m->dev->flags & IFF_POINTOPOINT &&
+			     !(dev->flags & IFF_POINTOPOINT)) ||
+			    (m->dev->flags & IFF_BROADCAST &&
+			     !(dev->flags & IFF_BROADCAST)) ||
+			    (m->dev->flags & IFF_MULTICAST &&
+			     !(dev->flags & IFF_MULTICAST)) ||
+			    dev->mtu < m->dev->mtu)
 				return -EINVAL;
 		} else {
 			if (!(dev->flags&IFF_POINTOPOINT))
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index 7eed77a..df5abbf 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -63,6 +63,12 @@
 static void sctp_assoc_bh_rcv(struct work_struct *work);
 static void sctp_assoc_free_asconf_acks(struct sctp_association *asoc);
 
+/* Keep track of the new idr low so that we don't re-use association id
+ * numbers too fast.  It is protected by they idr spin lock is in the
+ * range of 1 - INT_MAX.
+ */
+static u32 idr_low = 1;
+
 
 /* 1st Level Abstractions. */
 
@@ -167,7 +173,7 @@
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_HEARTBEAT] = 0;
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay;
 	asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] =
-		sp->autoclose * HZ;
+		(unsigned long)sp->autoclose * HZ;
 
 	/* Initilizes the timers */
 	for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i)
@@ -512,7 +518,13 @@
 	 * to this destination address earlier. The sender MUST set
 	 * CYCLING_CHANGEOVER to indicate that this switch is a
 	 * double switch to the same destination address.
+	 *
+	 * Really, only bother is we have data queued or outstanding on
+	 * the association.
 	 */
+	if (!asoc->outqueue.outstanding_bytes && !asoc->outqueue.out_qlen)
+		return;
+
 	if (transport->cacc.changeover_active)
 		transport->cacc.cycling_changeover = changeover;
 
@@ -732,6 +744,7 @@
 
 	peer->partial_bytes_acked = 0;
 	peer->flight_size = 0;
+	peer->burst_limited = 0;
 
 	/* Set the transport's RTO.initial value */
 	peer->rto = asoc->rto_initial;
@@ -1377,8 +1390,9 @@
 	case SCTP_STATE_SHUTDOWN_RECEIVED:
 	case SCTP_STATE_SHUTDOWN_SENT:
 		if ((asoc->rwnd > asoc->a_rwnd) &&
-		    ((asoc->rwnd - asoc->a_rwnd) >=
-		     min_t(__u32, (asoc->base.sk->sk_rcvbuf >> 1), asoc->pathmtu)))
+		    ((asoc->rwnd - asoc->a_rwnd) >= max_t(__u32,
+			   (asoc->base.sk->sk_rcvbuf >> sctp_rwnd_upd_shift),
+			   asoc->pathmtu)))
 			return 1;
 		break;
 	default:
@@ -1545,7 +1559,12 @@
 
 	spin_lock_bh(&sctp_assocs_id_lock);
 	error = idr_get_new_above(&sctp_assocs_id, (void *)asoc,
-				    1, &assoc_id);
+				    idr_low, &assoc_id);
+	if (!error) {
+		idr_low = assoc_id + 1;
+		if (idr_low == INT_MAX)
+			idr_low = 1;
+	}
 	spin_unlock_bh(&sctp_assocs_id_lock);
 	if (error == -EAGAIN)
 		goto retry;
diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c
index acf7c4d..8e4320040 100644
--- a/net/sctp/chunk.c
+++ b/net/sctp/chunk.c
@@ -263,9 +263,18 @@
 		if (0 == i)
 			frag |= SCTP_DATA_FIRST_FRAG;
 
-		if ((i == (whole - 1)) && !over)
+		if ((i == (whole - 1)) && !over) {
 			frag |= SCTP_DATA_LAST_FRAG;
 
+			/* The application requests to set the I-bit of the
+			 * last DATA chunk of a user message when providing
+			 * the user message to the SCTP implementation.
+			 */
+			if ((sinfo->sinfo_flags & SCTP_EOF) ||
+			    (sinfo->sinfo_flags & SCTP_SACK_IMMEDIATELY))
+				frag |= SCTP_DATA_SACK_IMM;
+		}
+
 		chunk = sctp_make_datafrag_empty(asoc, sinfo, len, frag, 0);
 
 		if (!chunk)
@@ -297,6 +306,10 @@
 		else
 			frag = SCTP_DATA_LAST_FRAG;
 
+		if ((sinfo->sinfo_flags & SCTP_EOF) ||
+		    (sinfo->sinfo_flags & SCTP_SACK_IMMEDIATELY))
+			frag |= SCTP_DATA_SACK_IMM;
+
 		chunk = sctp_make_datafrag_empty(asoc, sinfo, over, frag, 0);
 
 		if (!chunk)
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index bb280e6..cc50fbe 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -837,15 +837,16 @@
 		if (type & IPV6_ADDR_LINKLOCAL) {
 			if (!addr->v6.sin6_scope_id)
 				return 0;
-			dev = dev_get_by_index(&init_net, addr->v6.sin6_scope_id);
-			if (!dev)
-				return 0;
-			if (!ipv6_chk_addr(&init_net, &addr->v6.sin6_addr,
+			rcu_read_lock();
+			dev = dev_get_by_index_rcu(&init_net,
+						   addr->v6.sin6_scope_id);
+			if (!dev ||
+			    !ipv6_chk_addr(&init_net, &addr->v6.sin6_addr,
 					   dev, 0)) {
-				dev_put(dev);
+				rcu_read_unlock();
 				return 0;
 			}
-			dev_put(dev);
+			rcu_read_unlock();
 		} else if (type == IPV6_ADDR_MAPPED) {
 			if (!opt->v4mapped)
 				return 0;
@@ -873,10 +874,12 @@
 		if (type & IPV6_ADDR_LINKLOCAL) {
 			if (!addr->v6.sin6_scope_id)
 				return 0;
-			dev = dev_get_by_index(&init_net, addr->v6.sin6_scope_id);
+			rcu_read_lock();
+			dev = dev_get_by_index_rcu(&init_net,
+						   addr->v6.sin6_scope_id);
+			rcu_read_unlock();
 			if (!dev)
 				return 0;
-			dev_put(dev);
 		}
 		af = opt->pf->af;
 	}
@@ -930,7 +933,6 @@
 	.protocol      = IPPROTO_SCTP,
 	.prot 	       = &sctpv6_prot,
 	.ops           = &inet6_seqpacket_ops,
-	.capability    = -1,
 	.no_check      = 0,
 	.flags         = SCTP_PROTOSW_FLAG
 };
@@ -939,7 +941,6 @@
 	.protocol      = IPPROTO_SCTP,
 	.prot 	       = &sctpv6_prot,
 	.ops           = &inet6_seqpacket_ops,
-	.capability    = -1,
 	.no_check      = 0,
 	.flags         = SCTP_PROTOSW_FLAG,
 };
diff --git a/net/sctp/output.c b/net/sctp/output.c
index 5cbda8f..7c55893 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -429,23 +429,22 @@
 		list_del_init(&chunk->list);
 		if (sctp_chunk_is_data(chunk)) {
 
-			if (!chunk->has_tsn) {
-				sctp_chunk_assign_ssn(chunk);
-				sctp_chunk_assign_tsn(chunk);
+			if (!chunk->resent) {
 
-			/* 6.3.1 C4) When data is in flight and when allowed
-			 * by rule C5, a new RTT measurement MUST be made each
-			 * round trip.  Furthermore, new RTT measurements
-			 * SHOULD be made no more than once per round-trip
-			 * for a given destination transport address.
-			 */
+				/* 6.3.1 C4) When data is in flight and when allowed
+				 * by rule C5, a new RTT measurement MUST be made each
+				 * round trip.  Furthermore, new RTT measurements
+				 * SHOULD be made no more than once per round-trip
+				 * for a given destination transport address.
+				 */
 
 				if (!tp->rto_pending) {
 					chunk->rtt_in_progress = 1;
 					tp->rto_pending = 1;
 				}
-			} else
-				chunk->resent = 1;
+			}
+
+			chunk->resent = 1;
 
 			has_data = 1;
 		}
@@ -557,8 +556,6 @@
 		struct timer_list *timer;
 		unsigned long timeout;
 
-		tp->last_time_used = jiffies;
-
 		/* Restart the AUTOCLOSE timer when sending data. */
 		if (sctp_state(asoc, ESTABLISHED) && asoc->autoclose) {
 			timer = &asoc->timers[SCTP_EVENT_TIMEOUT_AUTOCLOSE];
@@ -617,7 +614,6 @@
 	sctp_xmit_t retval = SCTP_XMIT_OK;
 	size_t datasize, rwnd, inflight, flight_size;
 	struct sctp_transport *transport = packet->transport;
-	__u32 max_burst_bytes;
 	struct sctp_association *asoc = transport->asoc;
 	struct sctp_outq *q = &asoc->outqueue;
 
@@ -650,28 +646,6 @@
 		}
 	}
 
-	/* sctpimpguide-05 2.14.2
-	 * D) When the time comes for the sender to
-	 * transmit new DATA chunks, the protocol parameter Max.Burst MUST
-	 * first be applied to limit how many new DATA chunks may be sent.
-	 * The limit is applied by adjusting cwnd as follows:
-	 * 	if ((flightsize + Max.Burst * MTU) < cwnd)
-	 *		cwnd = flightsize + Max.Burst * MTU
-	 */
-	max_burst_bytes = asoc->max_burst * asoc->pathmtu;
-	if ((flight_size + max_burst_bytes) < transport->cwnd) {
-		transport->cwnd = flight_size + max_burst_bytes;
-		SCTP_DEBUG_PRINTK("%s: cwnd limited by max_burst: "
-				  "transport: %p, cwnd: %d, "
-				  "ssthresh: %d, flight_size: %d, "
-				  "pba: %d\n",
-				  __func__, transport,
-				  transport->cwnd,
-				  transport->ssthresh,
-				  transport->flight_size,
-				  transport->partial_bytes_acked);
-	}
-
 	/* RFC 2960 6.1  Transmission of DATA Chunks
 	 *
 	 * B) At any given time, the sender MUST NOT transmit new data
@@ -747,6 +721,8 @@
 	/* Has been accepted for transmission. */
 	if (!asoc->peer.prsctp_capable)
 		chunk->msg->can_abandon = 0;
+	sctp_chunk_assign_tsn(chunk);
+	sctp_chunk_assign_ssn(chunk);
 }
 
 static sctp_xmit_t sctp_packet_will_fit(struct sctp_packet *packet,
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index c9f20e2..229690f 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -191,8 +191,8 @@
 				 __u32 tsn)
 {
 	if (primary->cacc.changeover_active &&
-	    (sctp_cacc_skip_3_1(primary, transport, count_of_newacks)
-	     || sctp_cacc_skip_3_2(primary, tsn)))
+	    (sctp_cacc_skip_3_1(primary, transport, count_of_newacks) ||
+	     sctp_cacc_skip_3_2(primary, tsn)))
 		return 1;
 	return 0;
 }
@@ -423,16 +423,6 @@
 		if ((reason == SCTP_RTXR_FAST_RTX  &&
 			    (chunk->fast_retransmit == SCTP_NEED_FRTX)) ||
 		    (reason != SCTP_RTXR_FAST_RTX  && !chunk->tsn_gap_acked)) {
-			/* If this chunk was sent less then 1 rto ago, do not
-			 * retransmit this chunk, but give the peer time
-			 * to acknowlege it.  Do this only when
-			 * retransmitting due to T3 timeout.
-			 */
-			if (reason == SCTP_RTXR_T3_RTX &&
-			    time_before(jiffies, chunk->sent_at +
-						 transport->last_rto))
-				continue;
-
 			/* RFC 2960 6.2.1 Processing a Received SACK
 			 *
 			 * C) Any time a DATA chunk is marked for
@@ -931,6 +921,14 @@
 				goto sctp_flush_out;
 		}
 
+		/* Apply Max.Burst limitation to the current transport in
+		 * case it will be used for new data.  We are going to
+		 * rest it before we return, but we want to apply the limit
+		 * to the currently queued data.
+		 */
+		if (transport)
+			sctp_transport_burst_limited(transport);
+
 		/* Finally, transmit new packets.  */
 		while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
 			/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
@@ -976,6 +974,10 @@
 				packet = &transport->packet;
 				sctp_packet_config(packet, vtag,
 						   asoc->peer.ecn_capable);
+				/* We've switched transports, so apply the
+				 * Burst limit to the new transport.
+				 */
+				sctp_transport_burst_limited(transport);
 			}
 
 			SCTP_DEBUG_PRINTK("sctp_outq_flush(%p, %p[%s]), ",
@@ -1011,6 +1013,13 @@
 				break;
 
 			case SCTP_XMIT_OK:
+				/* The sender is in the SHUTDOWN-PENDING state,
+				 * The sender MAY set the I-bit in the DATA
+				 * chunk header.
+				 */
+				if (asoc->state == SCTP_STATE_SHUTDOWN_PENDING)
+					chunk->chunk_hdr->flags |= SCTP_DATA_SACK_IMM;
+
 				break;
 
 			default:
@@ -1063,6 +1072,9 @@
 		packet = &t->packet;
 		if (!sctp_packet_empty(packet))
 			error = sctp_packet_transmit(packet);
+
+		/* Clear the burst limited state, if any */
+		sctp_transport_burst_reset(t);
 	}
 
 	return error;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 612dc87..a3c8988 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -205,14 +205,14 @@
 	struct list_head *pos;
 	struct sctp_af *af;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		__list_for_each(pos, &sctp_address_families) {
 			af = list_entry(pos, struct sctp_af, list);
 			af->copy_addrlist(&sctp_local_addr_list, dev);
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 /* Free the existing local addresses.  */
@@ -296,19 +296,19 @@
 {
 	addr->v4.sin_family = AF_INET;
 	addr->v4.sin_port = 0;
-	addr->v4.sin_addr.s_addr = inet_sk(sk)->rcv_saddr;
+	addr->v4.sin_addr.s_addr = inet_sk(sk)->inet_rcv_saddr;
 }
 
 /* Initialize sk->sk_rcv_saddr from sctp_addr. */
 static void sctp_v4_to_sk_saddr(union sctp_addr *addr, struct sock *sk)
 {
-	inet_sk(sk)->rcv_saddr = addr->v4.sin_addr.s_addr;
+	inet_sk(sk)->inet_rcv_saddr = addr->v4.sin_addr.s_addr;
 }
 
 /* Initialize sk->sk_daddr from sctp_addr. */
 static void sctp_v4_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 {
-	inet_sk(sk)->daddr = addr->v4.sin_addr.s_addr;
+	inet_sk(sk)->inet_daddr = addr->v4.sin_addr.s_addr;
 }
 
 /* Initialize a sctp_addr from an address parameter. */
@@ -598,7 +598,7 @@
 
 	newinet = inet_sk(newsk);
 
-	newinet->daddr = asoc->peer.primary_addr.v4.sin_addr.s_addr;
+	newinet->inet_daddr = asoc->peer.primary_addr.v4.sin_addr.s_addr;
 
 	sk_refcnt_debug_inc(newsk);
 
@@ -909,7 +909,6 @@
 	.protocol   = IPPROTO_SCTP,
 	.prot       = &sctp_prot,
 	.ops        = &inet_seqpacket_ops,
-	.capability = -1,
 	.no_check   = 0,
 	.flags      = SCTP_PROTOSW_FLAG
 };
@@ -918,7 +917,6 @@
 	.protocol   = IPPROTO_SCTP,
 	.prot       = &sctp_prot,
 	.ops        = &inet_seqpacket_ops,
-	.capability = -1,
 	.no_check   = 0,
 	.flags      = SCTP_PROTOSW_FLAG
 };
@@ -1260,6 +1258,9 @@
 	/* Set SCOPE policy to enabled */
 	sctp_scope_policy = SCTP_SCOPE_POLICY_ENABLE;
 
+	/* Set the default rwnd update threshold */
+	sctp_rwnd_upd_shift		= SCTP_DEFAULT_RWND_SHIFT;
+
 	sctp_sysctl_register();
 
 	INIT_LIST_HEAD(&sctp_address_families);
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 9d881a6..9e73291 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -987,7 +987,10 @@
 
 	target = skb_put(chunk->skb, len);
 
-	memcpy(target, data, len);
+	if (data)
+		memcpy(target, data, len);
+	else
+		memset(target, 0, len);
 
 	/* Adjust the chunk length field.  */
 	chunk->chunk_hdr->length = htons(chunklen + len);
@@ -1129,16 +1132,18 @@
 struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc,
 				 const struct sctp_chunk *chunk,
 				 __be16 cause_code, const void *payload,
-				 size_t paylen)
+				 size_t paylen, size_t reserve_tail)
 {
 	struct sctp_chunk *retval;
 
-	retval = sctp_make_op_error_space(asoc, chunk, paylen);
+	retval = sctp_make_op_error_space(asoc, chunk, paylen + reserve_tail);
 	if (!retval)
 		goto nodata;
 
-	sctp_init_cause(retval, cause_code, paylen);
+	sctp_init_cause(retval, cause_code, paylen + reserve_tail);
 	sctp_addto_chunk(retval, paylen, payload);
+	if (reserve_tail)
+		sctp_addto_param(retval, reserve_tail, NULL);
 
 nodata:
 	return retval;
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 8674d49..d771cc1 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -217,8 +217,7 @@
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_SACK));
 	} else {
-		if (asoc->a_rwnd > asoc->rwnd)
-			asoc->a_rwnd = asoc->rwnd;
+		asoc->a_rwnd = asoc->rwnd;
 		sack = sctp_make_sack(asoc);
 		if (!sack)
 			goto nomem;
@@ -480,7 +479,6 @@
 	 * that indicates that we have an outstanding HB.
 	 */
 	if (!is_hb || transport->hb_sent) {
-		transport->last_rto = transport->rto;
 		transport->rto = min((transport->rto * 2), transport->asoc->rto_max);
 	}
 }
@@ -1418,6 +1416,8 @@
 			asoc->init_last_sent_to = t;
 			chunk->transport = t;
 			t->init_sent_count++;
+			/* Set the new transport as primary */
+			sctp_assoc_set_primary(asoc, t);
 			break;
 
 		case SCTP_CMD_INIT_RESTART:
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index d4df450..1ef9de9 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -996,14 +996,15 @@
 				sctp_sf_heartbeat(ep, asoc, type, arg,
 						  commands))
 			return SCTP_DISPOSITION_NOMEM;
+
 		/* Set transport error counter and association error counter
 		 * when sending heartbeat.
 		 */
-		sctp_add_cmd_sf(commands, SCTP_CMD_TRANSPORT_IDLE,
-				SCTP_TRANSPORT(transport));
 		sctp_add_cmd_sf(commands, SCTP_CMD_TRANSPORT_HB_SENT,
 				SCTP_TRANSPORT(transport));
 	}
+	sctp_add_cmd_sf(commands, SCTP_CMD_TRANSPORT_IDLE,
+			SCTP_TRANSPORT(transport));
 	sctp_add_cmd_sf(commands, SCTP_CMD_HB_TIMER_UPDATE,
 			SCTP_TRANSPORT(transport));
 
@@ -1720,7 +1721,7 @@
 
 		err = sctp_make_op_error(asoc, chunk,
 					 SCTP_ERROR_COOKIE_IN_SHUTDOWN,
-					 NULL, 0);
+					 NULL, 0, 0);
 		if (err)
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(err));
@@ -2868,6 +2869,7 @@
 					sctp_cmd_seq_t *commands)
 {
 	struct sctp_chunk *chunk = arg;
+	sctp_arg_t force = SCTP_NOFORCE();
 	int error;
 
 	if (!sctp_vtag_verify(chunk, asoc)) {
@@ -2901,6 +2903,9 @@
 		BUG();
 	}
 
+	if (chunk->chunk_hdr->flags & SCTP_DATA_SACK_IMM)
+		force = SCTP_FORCE();
+
 	if (asoc->autoclose) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_AUTOCLOSE));
@@ -2929,7 +2934,7 @@
 	 * more aggressive than the following algorithms allow.
 	 */
 	if (chunk->end_of_packet)
-		sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, SCTP_NOFORCE());
+		sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, force);
 
 	return SCTP_DISPOSITION_CONSUME;
 
@@ -2954,7 +2959,7 @@
 
 discard_noforce:
 	if (chunk->end_of_packet)
-		sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, SCTP_NOFORCE());
+		sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, force);
 
 	return SCTP_DISPOSITION_DISCARD;
 consume:
@@ -3973,7 +3978,7 @@
 			err_chunk = sctp_make_op_error(asoc, chunk,
 							SCTP_ERROR_UNSUP_HMAC,
 							&auth_hdr->hmac_id,
-							sizeof(__u16));
+							sizeof(__u16), 0);
 			if (err_chunk) {
 				sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 						SCTP_CHUNK(err_chunk));
@@ -4065,7 +4070,8 @@
 		hdr = unk_chunk->chunk_hdr;
 		err_chunk = sctp_make_op_error(asoc, unk_chunk,
 					       SCTP_ERROR_UNKNOWN_CHUNK, hdr,
-					       WORD_ROUND(ntohs(hdr->length)));
+					       WORD_ROUND(ntohs(hdr->length)),
+					       0);
 		if (err_chunk) {
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(err_chunk));
@@ -4084,7 +4090,8 @@
 		hdr = unk_chunk->chunk_hdr;
 		err_chunk = sctp_make_op_error(asoc, unk_chunk,
 					       SCTP_ERROR_UNKNOWN_CHUNK, hdr,
-					       WORD_ROUND(ntohs(hdr->length)));
+					       WORD_ROUND(ntohs(hdr->length)),
+					       0);
 		if (err_chunk) {
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(err_chunk));
@@ -6048,7 +6055,8 @@
 
 		err = sctp_make_op_error(asoc, chunk, SCTP_ERROR_INV_STRM,
 					 &data_hdr->stream,
-					 sizeof(data_hdr->stream));
+					 sizeof(data_hdr->stream),
+					 sizeof(u16));
 		if (err)
 			sctp_add_cmd_sf(commands, SCTP_CMD_REPLY,
 					SCTP_CHUNK(err));
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 3a95fcb..89ab66e 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -394,7 +394,7 @@
 
 	/* Refresh ephemeral port.  */
 	if (!bp->port)
-		bp->port = inet_sk(sk)->num;
+		bp->port = inet_sk(sk)->inet_num;
 
 	/* Add the address to the bind address list.
 	 * Use GFP_ATOMIC since BHs will be disabled.
@@ -403,7 +403,7 @@
 
 	/* Copy back into socket for getsockname() use. */
 	if (!ret) {
-		inet_sk(sk)->sport = htons(inet_sk(sk)->num);
+		inet_sk(sk)->inet_sport = htons(inet_sk(sk)->inet_num);
 		af->to_sk_saddr(addr, sk);
 	}
 
@@ -1117,7 +1117,7 @@
 	}
 
 	/* Initialize sk's dport and daddr for getpeername() */
-	inet_sk(sk)->dport = htons(asoc->peer.port);
+	inet_sk(sk)->inet_dport = htons(asoc->peer.port);
 	af = sctp_get_af_specific(sa_addr->sa.sa_family);
 	af->to_sk_daddr(sa_addr, sk);
 	sk->sk_err = 0;
@@ -1968,7 +1968,7 @@
 	if (err)
 		goto out_free;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 	if (sctp_ulpevent_is_notification(event)) {
 		msg->msg_flags |= MSG_NOTIFICATION;
 		sp->pf->event_msgname(event, msg->msg_name, addr_len);
@@ -2086,6 +2086,9 @@
 		return -EINVAL;
 	if (copy_from_user(&sp->autoclose, optval, optlen))
 		return -EFAULT;
+	/* make sure it won't exceed MAX_SCHEDULE_TIMEOUT */
+	if (sp->autoclose > (MAX_SCHEDULE_TIMEOUT / HZ) )
+		sp->autoclose = (__u32)(MAX_SCHEDULE_TIMEOUT / HZ) ;
 
 	return 0;
 }
@@ -2311,11 +2314,10 @@
 		}
 	}
 
-	/* Note that unless the spp_flag is set to SPP_PMTUD_ENABLE the value
-	 * of this field is ignored.  Note also that a value of zero
-	 * indicates the current setting should be left unchanged.
+	/* Note that a value of zero indicates the current setting should be
+	   left unchanged.
 	 */
-	if ((params->spp_flags & SPP_PMTUD_ENABLE) && params->spp_pathmaxrxt) {
+	if (params->spp_pathmaxrxt) {
 		if (trans) {
 			trans->pathmaxrxt = params->spp_pathmaxrxt;
 		} else if (asoc) {
@@ -2354,8 +2356,8 @@
 	    pmtud_change     == SPP_PMTUD ||
 	    sackdelay_change == SPP_SACKDELAY ||
 	    params.spp_sackdelay > 500 ||
-	    (params.spp_pathmtu
-	    && params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT))
+	    (params.spp_pathmtu &&
+	     params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT))
 		return -EINVAL;
 
 	/* If an address other than INADDR_ANY is specified, and
@@ -4349,90 +4351,6 @@
 	return 0;
 }
 
-static int sctp_getsockopt_peer_addrs_num_old(struct sock *sk, int len,
-					      char __user *optval,
-					      int __user *optlen)
-{
-	sctp_assoc_t id;
-	struct sctp_association *asoc;
-	struct list_head *pos;
-	int cnt = 0;
-
-	if (len < sizeof(sctp_assoc_t))
-		return -EINVAL;
-
-	if (copy_from_user(&id, optval, sizeof(sctp_assoc_t)))
-		return -EFAULT;
-
-	printk(KERN_WARNING "SCTP: Use of SCTP_GET_PEER_ADDRS_NUM_OLD "
-			    "socket option deprecated\n");
-	/* For UDP-style sockets, id specifies the association to query.  */
-	asoc = sctp_id2assoc(sk, id);
-	if (!asoc)
-		return -EINVAL;
-
-	list_for_each(pos, &asoc->peer.transport_addr_list) {
-		cnt ++;
-	}
-
-	return cnt;
-}
-
-/*
- * Old API for getting list of peer addresses. Does not work for 32-bit
- * programs running on a 64-bit kernel
- */
-static int sctp_getsockopt_peer_addrs_old(struct sock *sk, int len,
-					  char __user *optval,
-					  int __user *optlen)
-{
-	struct sctp_association *asoc;
-	int cnt = 0;
-	struct sctp_getaddrs_old getaddrs;
-	struct sctp_transport *from;
-	void __user *to;
-	union sctp_addr temp;
-	struct sctp_sock *sp = sctp_sk(sk);
-	int addrlen;
-
-	if (len < sizeof(struct sctp_getaddrs_old))
-		return -EINVAL;
-
-	len = sizeof(struct sctp_getaddrs_old);
-
-	if (copy_from_user(&getaddrs, optval, len))
-		return -EFAULT;
-
-	if (getaddrs.addr_num <= 0) return -EINVAL;
-
-	printk(KERN_WARNING "SCTP: Use of SCTP_GET_PEER_ADDRS_OLD "
-			    "socket option deprecated\n");
-
-	/* For UDP-style sockets, id specifies the association to query.  */
-	asoc = sctp_id2assoc(sk, getaddrs.assoc_id);
-	if (!asoc)
-		return -EINVAL;
-
-	to = (void __user *)getaddrs.addrs;
-	list_for_each_entry(from, &asoc->peer.transport_addr_list,
-				transports) {
-		memcpy(&temp, &from->ipaddr, sizeof(temp));
-		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp);
-		addrlen = sctp_get_af_specific(sk->sk_family)->sockaddr_len;
-		if (copy_to_user(to, &temp, addrlen))
-			return -EFAULT;
-		to += addrlen ;
-		cnt ++;
-		if (cnt >= getaddrs.addr_num) break;
-	}
-	getaddrs.addr_num = cnt;
-	if (put_user(len, optlen))
-		return -EFAULT;
-	if (copy_to_user(optval, &getaddrs, len))
-		return -EFAULT;
-
-	return 0;
-}
 
 static int sctp_getsockopt_peer_addrs(struct sock *sk, int len,
 				      char __user *optval, int __user *optlen)
@@ -4485,125 +4403,6 @@
 	return 0;
 }
 
-static int sctp_getsockopt_local_addrs_num_old(struct sock *sk, int len,
-					       char __user *optval,
-					       int __user *optlen)
-{
-	sctp_assoc_t id;
-	struct sctp_bind_addr *bp;
-	struct sctp_association *asoc;
-	struct sctp_sockaddr_entry *addr;
-	int cnt = 0;
-
-	if (len < sizeof(sctp_assoc_t))
-		return -EINVAL;
-
-	if (copy_from_user(&id, optval, sizeof(sctp_assoc_t)))
-		return -EFAULT;
-
-	printk(KERN_WARNING "SCTP: Use of SCTP_GET_LOCAL_ADDRS_NUM_OLD "
-			    "socket option deprecated\n");
-
-	/*
-	 *  For UDP-style sockets, id specifies the association to query.
-	 *  If the id field is set to the value '0' then the locally bound
-	 *  addresses are returned without regard to any particular
-	 *  association.
-	 */
-	if (0 == id) {
-		bp = &sctp_sk(sk)->ep->base.bind_addr;
-	} else {
-		asoc = sctp_id2assoc(sk, id);
-		if (!asoc)
-			return -EINVAL;
-		bp = &asoc->base.bind_addr;
-	}
-
-	/* If the endpoint is bound to 0.0.0.0 or ::0, count the valid
-	 * addresses from the global local address list.
-	 */
-	if (sctp_list_single_entry(&bp->address_list)) {
-		addr = list_entry(bp->address_list.next,
-				  struct sctp_sockaddr_entry, list);
-		if (sctp_is_any(sk, &addr->a)) {
-			rcu_read_lock();
-			list_for_each_entry_rcu(addr,
-						&sctp_local_addr_list, list) {
-				if (!addr->valid)
-					continue;
-
-				if ((PF_INET == sk->sk_family) &&
-				    (AF_INET6 == addr->a.sa.sa_family))
-					continue;
-
-				if ((PF_INET6 == sk->sk_family) &&
-				    inet_v6_ipv6only(sk) &&
-				    (AF_INET == addr->a.sa.sa_family))
-					continue;
-
-				cnt++;
-			}
-			rcu_read_unlock();
-		} else {
-			cnt = 1;
-		}
-		goto done;
-	}
-
-	/* Protection on the bound address list is not needed,
-	 * since in the socket option context we hold the socket lock,
-	 * so there is no way that the bound address list can change.
-	 */
-	list_for_each_entry(addr, &bp->address_list, list) {
-		cnt ++;
-	}
-done:
-	return cnt;
-}
-
-/* Helper function that copies local addresses to user and returns the number
- * of addresses copied.
- */
-static int sctp_copy_laddrs_old(struct sock *sk, __u16 port,
-					int max_addrs, void *to,
-					int *bytes_copied)
-{
-	struct sctp_sockaddr_entry *addr;
-	union sctp_addr temp;
-	int cnt = 0;
-	int addrlen;
-
-	rcu_read_lock();
-	list_for_each_entry_rcu(addr, &sctp_local_addr_list, list) {
-		if (!addr->valid)
-			continue;
-
-		if ((PF_INET == sk->sk_family) &&
-		    (AF_INET6 == addr->a.sa.sa_family))
-			continue;
-		if ((PF_INET6 == sk->sk_family) &&
-		    inet_v6_ipv6only(sk) &&
-		    (AF_INET == addr->a.sa.sa_family))
-			continue;
-		memcpy(&temp, &addr->a, sizeof(temp));
-		if (!temp.v4.sin_port)
-			temp.v4.sin_port = htons(port);
-
-		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sctp_sk(sk),
-								&temp);
-		addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
-		memcpy(to, &temp, addrlen);
-
-		to += addrlen;
-		*bytes_copied += addrlen;
-		cnt ++;
-		if (cnt >= max_addrs) break;
-	}
-	rcu_read_unlock();
-
-	return cnt;
-}
-
 static int sctp_copy_laddrs(struct sock *sk, __u16 port, void *to,
 			    size_t space_left, int *bytes_copied)
 {
@@ -4647,112 +4446,6 @@
 	return cnt;
 }
 
-/* Old API for getting list of local addresses. Does not work for 32-bit
- * programs running on a 64-bit kernel
- */
-static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len,
-					   char __user *optval, int __user *optlen)
-{
-	struct sctp_bind_addr *bp;
-	struct sctp_association *asoc;
-	int cnt = 0;
-	struct sctp_getaddrs_old getaddrs;
-	struct sctp_sockaddr_entry *addr;
-	void __user *to;
-	union sctp_addr temp;
-	struct sctp_sock *sp = sctp_sk(sk);
-	int addrlen;
-	int err = 0;
-	void *addrs;
-	void *buf;
-	int bytes_copied = 0;
-
-	if (len < sizeof(struct sctp_getaddrs_old))
-		return -EINVAL;
-
-	len = sizeof(struct sctp_getaddrs_old);
-	if (copy_from_user(&getaddrs, optval, len))
-		return -EFAULT;
-
-	if (getaddrs.addr_num <= 0 ||
-	    getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr)))
-		return -EINVAL;
-
-	printk(KERN_WARNING "SCTP: Use of SCTP_GET_LOCAL_ADDRS_OLD "
-			    "socket option deprecated\n");
-
-	/*
-	 *  For UDP-style sockets, id specifies the association to query.
-	 *  If the id field is set to the value '0' then the locally bound
-	 *  addresses are returned without regard to any particular
-	 *  association.
-	 */
-	if (0 == getaddrs.assoc_id) {
-		bp = &sctp_sk(sk)->ep->base.bind_addr;
-	} else {
-		asoc = sctp_id2assoc(sk, getaddrs.assoc_id);
-		if (!asoc)
-			return -EINVAL;
-		bp = &asoc->base.bind_addr;
-	}
-
-	to = getaddrs.addrs;
-
-	/* Allocate space for a local instance of packed array to hold all
-	 * the data.  We store addresses here first and then put write them
-	 * to the user in one shot.
-	 */
-	addrs = kmalloc(sizeof(union sctp_addr) * getaddrs.addr_num,
-			GFP_KERNEL);
-	if (!addrs)
-		return -ENOMEM;
-
-	/* If the endpoint is bound to 0.0.0.0 or ::0, get the valid
-	 * addresses from the global local address list.
-	 */
-	if (sctp_list_single_entry(&bp->address_list)) {
-		addr = list_entry(bp->address_list.next,
-				  struct sctp_sockaddr_entry, list);
-		if (sctp_is_any(sk, &addr->a)) {
-			cnt = sctp_copy_laddrs_old(sk, bp->port,
-						   getaddrs.addr_num,
-						   addrs, &bytes_copied);
-			goto copy_getaddrs;
-		}
-	}
-
-	buf = addrs;
-	/* Protection on the bound address list is not needed since
-	 * in the socket option context we hold a socket lock and
-	 * thus the bound address list can't change.
-	 */
-	list_for_each_entry(addr, &bp->address_list, list) {
-		memcpy(&temp, &addr->a, sizeof(temp));
-		sctp_get_pf_specific(sk->sk_family)->addr_v4map(sp, &temp);
-		addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
-		memcpy(buf, &temp, addrlen);
-		buf += addrlen;
-		bytes_copied += addrlen;
-		cnt ++;
-		if (cnt >= getaddrs.addr_num) break;
-	}
-
-copy_getaddrs:
-	/* copy the entire address list into the user provided space */
-	if (copy_to_user(to, addrs, bytes_copied)) {
-		err = -EFAULT;
-		goto error;
-	}
-
-	/* copy the leading structure back to user */
-	getaddrs.addr_num = cnt;
-	if (copy_to_user(optval, &getaddrs, len))
-		err = -EFAULT;
-
-error:
-	kfree(addrs);
-	return err;
-}
 
 static int sctp_getsockopt_local_addrs(struct sock *sk, int len,
 				       char __user *optval, int __user *optlen)
@@ -5603,22 +5296,6 @@
 	case SCTP_INITMSG:
 		retval = sctp_getsockopt_initmsg(sk, len, optval, optlen);
 		break;
-	case SCTP_GET_PEER_ADDRS_NUM_OLD:
-		retval = sctp_getsockopt_peer_addrs_num_old(sk, len, optval,
-							    optlen);
-		break;
-	case SCTP_GET_LOCAL_ADDRS_NUM_OLD:
-		retval = sctp_getsockopt_local_addrs_num_old(sk, len, optval,
-							     optlen);
-		break;
-	case SCTP_GET_PEER_ADDRS_OLD:
-		retval = sctp_getsockopt_peer_addrs_old(sk, len, optval,
-							optlen);
-		break;
-	case SCTP_GET_LOCAL_ADDRS_OLD:
-		retval = sctp_getsockopt_local_addrs_old(sk, len, optval,
-							 optlen);
-		break;
 	case SCTP_GET_PEER_ADDRS:
 		retval = sctp_getsockopt_peer_addrs(sk, len, optval,
 						    optlen);
@@ -5861,7 +5538,7 @@
 	 */
 success:
 	if (!sctp_sk(sk)->bind_hash) {
-		inet_sk(sk)->num = snum;
+		inet_sk(sk)->inet_num = snum;
 		sk_add_bind_node(sk, &pp->owner);
 		sctp_sk(sk)->bind_hash = pp;
 	}
@@ -5933,7 +5610,7 @@
 		if (sctp_autobind(sk))
 			return -EAGAIN;
 	} else {
-		if (sctp_get_port(sk, inet_sk(sk)->num)) {
+		if (sctp_get_port(sk, inet_sk(sk)->inet_num)) {
 			sk->sk_state = SCTP_SS_CLOSED;
 			return -EADDRINUSE;
 		}
@@ -6104,14 +5781,14 @@
 static inline void __sctp_put_port(struct sock *sk)
 {
 	struct sctp_bind_hashbucket *head =
-		&sctp_port_hashtable[sctp_phashfn(inet_sk(sk)->num)];
+		&sctp_port_hashtable[sctp_phashfn(inet_sk(sk)->inet_num)];
 	struct sctp_bind_bucket *pp;
 
 	sctp_spin_lock(&head->lock);
 	pp = sctp_sk(sk)->bind_hash;
 	__sk_del_bind_node(sk);
 	sctp_sk(sk)->bind_hash = NULL;
-	inet_sk(sk)->num = 0;
+	inet_sk(sk)->inet_num = 0;
 	sctp_bucket_destroy(pp);
 	sctp_spin_unlock(&head->lock);
 }
@@ -6138,7 +5815,7 @@
 	/* Initialize a local sockaddr structure to INADDR_ANY. */
 	af = sctp_sk(sk)->pf->af;
 
-	port = htons(inet_sk(sk)->num);
+	port = htons(inet_sk(sk)->inet_num);
 	af->inaddr_any(&autoaddr, port);
 
 	return sctp_do_bind(sk, &autoaddr, af->sockaddr_len);
@@ -6707,12 +6384,12 @@
 	/* Initialize sk's sport, dport, rcv_saddr and daddr for
 	 * getsockname() and getpeername()
 	 */
-	newinet->sport = inet->sport;
-	newinet->saddr = inet->saddr;
-	newinet->rcv_saddr = inet->rcv_saddr;
-	newinet->dport = htons(asoc->peer.port);
+	newinet->inet_sport = inet->inet_sport;
+	newinet->inet_saddr = inet->inet_saddr;
+	newinet->inet_rcv_saddr = inet->inet_rcv_saddr;
+	newinet->inet_dport = htons(asoc->peer.port);
 	newinet->pmtudisc = inet->pmtudisc;
-	newinet->id = asoc->next_tsn ^ jiffies;
+	newinet->inet_id = asoc->next_tsn ^ jiffies;
 
 	newinet->uc_ttl = inet->uc_ttl;
 	newinet->mc_loop = 1;
@@ -6751,13 +6428,13 @@
 	newsp->hmac = NULL;
 
 	/* Hook this new socket in to the bind_hash list. */
-	head = &sctp_port_hashtable[sctp_phashfn(inet_sk(oldsk)->num)];
+	head = &sctp_port_hashtable[sctp_phashfn(inet_sk(oldsk)->inet_num)];
 	sctp_local_bh_disable();
 	sctp_spin_lock(&head->lock);
 	pp = sctp_sk(oldsk)->bind_hash;
 	sk_add_bind_node(newsk, &pp->owner);
 	sctp_sk(newsk)->bind_hash = pp;
-	inet_sk(newsk)->num = inet_sk(oldsk)->num;
+	inet_sk(newsk)->inet_num = inet_sk(oldsk)->inet_num;
 	sctp_spin_unlock(&head->lock);
 	sctp_local_bh_enable();
 
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index ab7151d..832590b 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -52,6 +52,7 @@
 static int sack_timer_min = 1;
 static int sack_timer_max = 500;
 static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
+static int rwnd_scale_max = 16;
 
 extern int sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
@@ -59,180 +60,145 @@
 
 static ctl_table sctp_table[] = {
 	{
-		.ctl_name	= NET_SCTP_RTO_INITIAL,
 		.procname	= "rto_initial",
 		.data		= &sctp_rto_initial,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1         = &one,
 		.extra2         = &timer_max
 	},
 	{
-		.ctl_name	= NET_SCTP_RTO_MIN,
 		.procname	= "rto_min",
 		.data		= &sctp_rto_min,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1         = &one,
 		.extra2         = &timer_max
 	},
 	{
-		.ctl_name	= NET_SCTP_RTO_MAX,
 		.procname	= "rto_max",
 		.data		= &sctp_rto_max,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1         = &one,
 		.extra2         = &timer_max
 	},
 	{
-		.ctl_name	= NET_SCTP_VALID_COOKIE_LIFE,
 		.procname	= "valid_cookie_life",
 		.data		= &sctp_valid_cookie_life,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1         = &one,
 		.extra2         = &timer_max
 	},
 	{
-		.ctl_name	= NET_SCTP_MAX_BURST,
 		.procname	= "max_burst",
 		.data		= &sctp_max_burst,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &zero,
 		.extra2		= &int_max
 	},
 	{
-		.ctl_name	= NET_SCTP_ASSOCIATION_MAX_RETRANS,
 		.procname	= "association_max_retrans",
 		.data		= &sctp_max_retrans_association,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &one,
 		.extra2		= &int_max
 	},
 	{
-		.ctl_name	= NET_SCTP_SNDBUF_POLICY,
 		.procname	= "sndbuf_policy",
 		.data		= &sctp_sndbuf_policy,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_RCVBUF_POLICY,
 		.procname	= "rcvbuf_policy",
 		.data		= &sctp_rcvbuf_policy,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_PATH_MAX_RETRANS,
 		.procname	= "path_max_retrans",
 		.data		= &sctp_max_retrans_path,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &one,
 		.extra2		= &int_max
 	},
 	{
-		.ctl_name	= NET_SCTP_MAX_INIT_RETRANSMITS,
 		.procname	= "max_init_retransmits",
 		.data		= &sctp_max_retrans_init,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1		= &one,
 		.extra2		= &int_max
 	},
 	{
-		.ctl_name	= NET_SCTP_HB_INTERVAL,
 		.procname	= "hb_interval",
 		.data		= &sctp_hb_interval,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1         = &one,
 		.extra2         = &timer_max
 	},
 	{
-		.ctl_name	= NET_SCTP_PRESERVE_ENABLE,
 		.procname	= "cookie_preserve_enable",
 		.data		= &sctp_cookie_preserve_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_RTO_ALPHA,
 		.procname	= "rto_alpha_exp_divisor",
 		.data		= &sctp_rto_alpha,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_RTO_BETA,
 		.procname	= "rto_beta_exp_divisor",
 		.data		= &sctp_rto_beta,
 		.maxlen		= sizeof(int),
 		.mode		= 0444,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_ADDIP_ENABLE,
 		.procname	= "addip_enable",
 		.data		= &sctp_addip_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_PRSCTP_ENABLE,
 		.procname	= "prsctp_enable",
 		.data		= &sctp_prsctp_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= NET_SCTP_SACK_TIMEOUT,
 		.procname	= "sack_timeout",
 		.data		= &sctp_sack_timeout,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.strategy	= sysctl_intvec,
 		.extra1         = &sack_timer_min,
 		.extra2         = &sack_timer_max,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sctp_mem",
 		.data		= &sysctl_sctp_mem,
 		.maxlen		= sizeof(sysctl_sctp_mem),
@@ -240,7 +206,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sctp_rmem",
 		.data		= &sysctl_sctp_rmem,
 		.maxlen		= sizeof(sysctl_sctp_rmem),
@@ -248,7 +213,6 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "sctp_wmem",
 		.data		= &sysctl_sctp_wmem,
 		.maxlen		= sizeof(sysctl_sctp_wmem),
@@ -256,40 +220,44 @@
 		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "auth_enable",
 		.data		= &sctp_auth_enable,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "addip_noauth_enable",
 		.data		= &sctp_addip_noauth,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
-		.strategy	= sysctl_intvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "addr_scope_policy",
 		.data		= &sctp_scope_policy,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &addr_scope_max,
 	},
-	{ .ctl_name = 0 }
+	{
+		.procname	= "rwnd_update_shift",
+		.data		= &sctp_rwnd_upd_shift,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec_minmax,
+		.extra1		= &one,
+		.extra2		= &rwnd_scale_max,
+	},
+
+	{ /* sentinel */ }
 };
 
 static struct ctl_path sctp_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "sctp", .ctl_name = NET_SCTP, },
+	{ .procname = "net", },
+	{ .procname = "sctp", },
 	{ }
 };
 
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index 3b141bb..b827d21 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -74,7 +74,7 @@
 	 * given destination transport address, set RTO to the protocol
 	 * parameter 'RTO.Initial'.
 	 */
-	peer->last_rto = peer->rto = msecs_to_jiffies(sctp_rto_initial);
+	peer->rto = msecs_to_jiffies(sctp_rto_initial);
 	peer->rtt = 0;
 	peer->rttvar = 0;
 	peer->srtt = 0;
@@ -83,7 +83,6 @@
 	peer->fast_recovery = 0;
 
 	peer->last_time_heard = jiffies;
-	peer->last_time_used = jiffies;
 	peer->last_time_ecne_reduced = jiffies;
 
 	peer->init_sent_count = 0;
@@ -386,7 +385,6 @@
 		tp->rto = tp->asoc->rto_max;
 
 	tp->rtt = rtt;
-	tp->last_rto = tp->rto;
 
 	/* Reset rto_pending so that a new RTT measurement is started when a
 	 * new data chunk is sent.
@@ -565,10 +563,8 @@
 		 * to be done every RTO interval, we do it every hearbeat
 		 * interval.
 		 */
-		if (time_after(jiffies, transport->last_time_used +
-					transport->rto))
-			transport->cwnd = max(transport->cwnd/2,
-						 4*transport->asoc->pathmtu);
+		transport->cwnd = max(transport->cwnd/2,
+					 4*transport->asoc->pathmtu);
 		break;
 	}
 
@@ -579,6 +575,43 @@
 			  transport->cwnd, transport->ssthresh);
 }
 
+/* Apply Max.Burst limit to the congestion window:
+ * sctpimpguide-05 2.14.2
+ * D) When the time comes for the sender to
+ * transmit new DATA chunks, the protocol parameter Max.Burst MUST
+ * first be applied to limit how many new DATA chunks may be sent.
+ * The limit is applied by adjusting cwnd as follows:
+ * 	if ((flightsize+ Max.Burst * MTU) < cwnd)
+ * 		cwnd = flightsize + Max.Burst * MTU
+ */
+
+void sctp_transport_burst_limited(struct sctp_transport *t)
+{
+	struct sctp_association *asoc = t->asoc;
+	u32 old_cwnd = t->cwnd;
+	u32 max_burst_bytes;
+
+	if (t->burst_limited)
+		return;
+
+	max_burst_bytes = t->flight_size + (asoc->max_burst * asoc->pathmtu);
+	if (max_burst_bytes < old_cwnd) {
+		t->cwnd = max_burst_bytes;
+		t->burst_limited = old_cwnd;
+	}
+}
+
+/* Restore the old cwnd congestion window, after the burst had it's
+ * desired effect.
+ */
+void sctp_transport_burst_reset(struct sctp_transport *t)
+{
+	if (t->burst_limited) {
+		t->cwnd = t->burst_limited;
+		t->burst_limited = 0;
+	}
+}
+
 /* What is the next timeout value for this transport? */
 unsigned long sctp_transport_timeout(struct sctp_transport *t)
 {
@@ -601,8 +634,9 @@
 	 * (see Section 6.2.1)
 	 */
 	t->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380));
+	t->burst_limited = 0;
 	t->ssthresh = asoc->peer.i.a_rwnd;
-	t->last_rto = t->rto = asoc->rto_initial;
+	t->rto = asoc->rto_initial;
 	t->rtt = 0;
 	t->srtt = 0;
 	t->rttvar = 0;
diff --git a/net/socket.c b/net/socket.c
index 7565536..b94c3dd 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -97,6 +97,12 @@
 #include <net/sock.h>
 #include <linux/netfilter.h>
 
+#include <linux/if_tun.h>
+#include <linux/ipv6_route.h>
+#include <linux/route.h>
+#include <linux/sockios.h>
+#include <linux/atalk.h>
+
 static int sock_no_open(struct inode *irrelevant, struct file *dontcare);
 static ssize_t sock_aio_read(struct kiocb *iocb, const struct iovec *iov,
 			 unsigned long nr_segs, loff_t pos);
@@ -668,10 +674,24 @@
 
 EXPORT_SYMBOL_GPL(__sock_recv_timestamp);
 
-static inline int __sock_recvmsg(struct kiocb *iocb, struct socket *sock,
-				 struct msghdr *msg, size_t size, int flags)
+inline void sock_recv_drops(struct msghdr *msg, struct sock *sk, struct sk_buff *skb)
 {
-	int err;
+	if (sock_flag(sk, SOCK_RXQ_OVFL) && skb && skb->dropcount)
+		put_cmsg(msg, SOL_SOCKET, SO_RXQ_OVFL,
+			sizeof(__u32), &skb->dropcount);
+}
+
+void sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk,
+	struct sk_buff *skb)
+{
+	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_drops(msg, sk, skb);
+}
+EXPORT_SYMBOL_GPL(sock_recv_ts_and_drops);
+
+static inline int __sock_recvmsg_nosec(struct kiocb *iocb, struct socket *sock,
+				       struct msghdr *msg, size_t size, int flags)
+{
 	struct sock_iocb *si = kiocb_to_siocb(iocb);
 
 	si->sock = sock;
@@ -680,13 +700,17 @@
 	si->size = size;
 	si->flags = flags;
 
-	err = security_socket_recvmsg(sock, msg, size, flags);
-	if (err)
-		return err;
-
 	return sock->ops->recvmsg(iocb, sock, msg, size, flags);
 }
 
+static inline int __sock_recvmsg(struct kiocb *iocb, struct socket *sock,
+				 struct msghdr *msg, size_t size, int flags)
+{
+	int err = security_socket_recvmsg(sock, msg, size, flags);
+
+	return err ?: __sock_recvmsg_nosec(iocb, sock, msg, size, flags);
+}
+
 int sock_recvmsg(struct socket *sock, struct msghdr *msg,
 		 size_t size, int flags)
 {
@@ -702,6 +726,21 @@
 	return ret;
 }
 
+static int sock_recvmsg_nosec(struct socket *sock, struct msghdr *msg,
+			      size_t size, int flags)
+{
+	struct kiocb iocb;
+	struct sock_iocb siocb;
+	int ret;
+
+	init_sync_kiocb(&iocb, NULL);
+	iocb.private = &siocb;
+	ret = __sock_recvmsg_nosec(&iocb, sock, msg, size, flags);
+	if (-EIOCBQUEUED == ret)
+		ret = wait_on_sync_kiocb(&iocb);
+	return ret;
+}
+
 int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
 		   struct kvec *vec, size_t num, size_t size, int flags)
 {
@@ -886,6 +925,24 @@
 
 EXPORT_SYMBOL(dlci_ioctl_set);
 
+static long sock_do_ioctl(struct net *net, struct socket *sock,
+				 unsigned int cmd, unsigned long arg)
+{
+	int err;
+	void __user *argp = (void __user *)arg;
+
+	err = sock->ops->ioctl(sock, cmd, arg);
+
+	/*
+	 * If this ioctl is unknown try to hand it down
+	 * to the NIC driver.
+	 */
+	if (err == -ENOIOCTLCMD)
+		err = dev_ioctl(net, cmd, argp);
+
+	return err;
+}
+
 /*
  *	With an ioctl, arg may well be a user mode pointer, but we don't know
  *	what to do with it - that's up to the protocol still.
@@ -905,11 +962,11 @@
 	if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
 		err = dev_ioctl(net, cmd, argp);
 	} else
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_WEXT_CORE
 	if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
 		err = dev_ioctl(net, cmd, argp);
 	} else
-#endif				/* CONFIG_WIRELESS_EXT */
+#endif
 		switch (cmd) {
 		case FIOSETOWN:
 		case SIOCSPGRP:
@@ -959,14 +1016,7 @@
 			mutex_unlock(&dlci_ioctl_mutex);
 			break;
 		default:
-			err = sock->ops->ioctl(sock, cmd, arg);
-
-			/*
-			 * If this ioctl is unknown try to hand it down
-			 * to the NIC driver.
-			 */
-			if (err == -ENOIOCTLCMD)
-				err = dev_ioctl(net, cmd, argp);
+			err = sock_do_ioctl(net, sock, cmd, arg);
 			break;
 		}
 	return err;
@@ -1100,11 +1150,14 @@
 		fna->fa_next = sock->fasync_list;
 		write_lock_bh(&sk->sk_callback_lock);
 		sock->fasync_list = fna;
+		sock_set_flag(sk, SOCK_FASYNC);
 		write_unlock_bh(&sk->sk_callback_lock);
 	} else {
 		if (fa != NULL) {
 			write_lock_bh(&sk->sk_callback_lock);
 			*prev = fa->fa_next;
+			if (!sock->fasync_list)
+				sock_reset_flag(sk, SOCK_FASYNC);
 			write_unlock_bh(&sk->sk_callback_lock);
 			kfree(fa);
 		}
@@ -1216,7 +1269,7 @@
 	/* Now protected by module ref count */
 	rcu_read_unlock();
 
-	err = pf->create(net, sock, protocol);
+	err = pf->create(net, sock, protocol, kern);
 	if (err < 0)
 		goto out_module_put;
 
@@ -1965,22 +2018,15 @@
 	return err;
 }
 
-/*
- *	BSD recvmsg interface
- */
-
-SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
-		unsigned int, flags)
+static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
+			 struct msghdr *msg_sys, unsigned flags, int nosec)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
-	struct socket *sock;
 	struct iovec iovstack[UIO_FASTIOV];
 	struct iovec *iov = iovstack;
-	struct msghdr msg_sys;
 	unsigned long cmsg_ptr;
 	int err, iov_size, total_len, len;
-	int fput_needed;
 
 	/* kernel mode address */
 	struct sockaddr_storage addr;
@@ -1990,27 +2036,23 @@
 	int __user *uaddr_len;
 
 	if (MSG_CMSG_COMPAT & flags) {
-		if (get_compat_msghdr(&msg_sys, msg_compat))
+		if (get_compat_msghdr(msg_sys, msg_compat))
 			return -EFAULT;
 	}
-	else if (copy_from_user(&msg_sys, msg, sizeof(struct msghdr)))
+	else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr)))
 		return -EFAULT;
 
-	sock = sockfd_lookup_light(fd, &err, &fput_needed);
-	if (!sock)
-		goto out;
-
 	err = -EMSGSIZE;
-	if (msg_sys.msg_iovlen > UIO_MAXIOV)
-		goto out_put;
+	if (msg_sys->msg_iovlen > UIO_MAXIOV)
+		goto out;
 
 	/* Check whether to allocate the iovec area */
 	err = -ENOMEM;
-	iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
-	if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+	iov_size = msg_sys->msg_iovlen * sizeof(struct iovec);
+	if (msg_sys->msg_iovlen > UIO_FASTIOV) {
 		iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
 		if (!iov)
-			goto out_put;
+			goto out;
 	}
 
 	/*
@@ -2018,46 +2060,47 @@
 	 *      kernel msghdr to use the kernel address space)
 	 */
 
-	uaddr = (__force void __user *)msg_sys.msg_name;
+	uaddr = (__force void __user *)msg_sys->msg_name;
 	uaddr_len = COMPAT_NAMELEN(msg);
 	if (MSG_CMSG_COMPAT & flags) {
-		err = verify_compat_iovec(&msg_sys, iov,
+		err = verify_compat_iovec(msg_sys, iov,
 					  (struct sockaddr *)&addr,
 					  VERIFY_WRITE);
 	} else
-		err = verify_iovec(&msg_sys, iov,
+		err = verify_iovec(msg_sys, iov,
 				   (struct sockaddr *)&addr,
 				   VERIFY_WRITE);
 	if (err < 0)
 		goto out_freeiov;
 	total_len = err;
 
-	cmsg_ptr = (unsigned long)msg_sys.msg_control;
-	msg_sys.msg_flags = flags & (MSG_CMSG_CLOEXEC|MSG_CMSG_COMPAT);
+	cmsg_ptr = (unsigned long)msg_sys->msg_control;
+	msg_sys->msg_flags = flags & (MSG_CMSG_CLOEXEC|MSG_CMSG_COMPAT);
 
 	if (sock->file->f_flags & O_NONBLOCK)
 		flags |= MSG_DONTWAIT;
-	err = sock_recvmsg(sock, &msg_sys, total_len, flags);
+	err = (nosec ? sock_recvmsg_nosec : sock_recvmsg)(sock, msg_sys,
+							  total_len, flags);
 	if (err < 0)
 		goto out_freeiov;
 	len = err;
 
 	if (uaddr != NULL) {
 		err = move_addr_to_user((struct sockaddr *)&addr,
-					msg_sys.msg_namelen, uaddr,
+					msg_sys->msg_namelen, uaddr,
 					uaddr_len);
 		if (err < 0)
 			goto out_freeiov;
 	}
-	err = __put_user((msg_sys.msg_flags & ~MSG_CMSG_COMPAT),
+	err = __put_user((msg_sys->msg_flags & ~MSG_CMSG_COMPAT),
 			 COMPAT_FLAGS(msg));
 	if (err)
 		goto out_freeiov;
 	if (MSG_CMSG_COMPAT & flags)
-		err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
+		err = __put_user((unsigned long)msg_sys->msg_control - cmsg_ptr,
 				 &msg_compat->msg_controllen);
 	else
-		err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
+		err = __put_user((unsigned long)msg_sys->msg_control - cmsg_ptr,
 				 &msg->msg_controllen);
 	if (err)
 		goto out_freeiov;
@@ -2066,21 +2109,162 @@
 out_freeiov:
 	if (iov != iovstack)
 		sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
+out:
+	return err;
+}
+
+/*
+ *	BSD recvmsg interface
+ */
+
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+		unsigned int, flags)
+{
+	int fput_needed, err;
+	struct msghdr msg_sys;
+	struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed);
+
+	if (!sock)
+		goto out;
+
+	err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0);
+
 	fput_light(sock->file, fput_needed);
 out:
 	return err;
 }
 
-#ifdef __ARCH_WANT_SYS_SOCKETCALL
+/*
+ *     Linux recvmmsg interface
+ */
 
+int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+		   unsigned int flags, struct timespec *timeout)
+{
+	int fput_needed, err, datagrams;
+	struct socket *sock;
+	struct mmsghdr __user *entry;
+	struct compat_mmsghdr __user *compat_entry;
+	struct msghdr msg_sys;
+	struct timespec end_time;
+
+	if (timeout &&
+	    poll_select_set_timeout(&end_time, timeout->tv_sec,
+				    timeout->tv_nsec))
+		return -EINVAL;
+
+	datagrams = 0;
+
+	sock = sockfd_lookup_light(fd, &err, &fput_needed);
+	if (!sock)
+		return err;
+
+	err = sock_error(sock->sk);
+	if (err)
+		goto out_put;
+
+	entry = mmsg;
+	compat_entry = (struct compat_mmsghdr __user *)mmsg;
+
+	while (datagrams < vlen) {
+		/*
+		 * No need to ask LSM for more than the first datagram.
+		 */
+		if (MSG_CMSG_COMPAT & flags) {
+			err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
+					    &msg_sys, flags, datagrams);
+			if (err < 0)
+				break;
+			err = __put_user(err, &compat_entry->msg_len);
+			++compat_entry;
+		} else {
+			err = __sys_recvmsg(sock, (struct msghdr __user *)entry,
+					    &msg_sys, flags, datagrams);
+			if (err < 0)
+				break;
+			err = put_user(err, &entry->msg_len);
+			++entry;
+		}
+
+		if (err)
+			break;
+		++datagrams;
+
+		if (timeout) {
+			ktime_get_ts(timeout);
+			*timeout = timespec_sub(end_time, *timeout);
+			if (timeout->tv_sec < 0) {
+				timeout->tv_sec = timeout->tv_nsec = 0;
+				break;
+			}
+
+			/* Timeout, return less than vlen datagrams */
+			if (timeout->tv_nsec == 0 && timeout->tv_sec == 0)
+				break;
+		}
+
+		/* Out of band data, return right away */
+		if (msg_sys.msg_flags & MSG_OOB)
+			break;
+	}
+
+out_put:
+	fput_light(sock->file, fput_needed);
+
+	if (err == 0)
+		return datagrams;
+
+	if (datagrams != 0) {
+		/*
+		 * We may return less entries than requested (vlen) if the
+		 * sock is non block and there aren't enough datagrams...
+		 */
+		if (err != -EAGAIN) {
+			/*
+			 * ... or  if recvmsg returns an error after we
+			 * received some datagrams, where we record the
+			 * error to return on the next call or if the
+			 * app asks about it using getsockopt(SO_ERROR).
+			 */
+			sock->sk->sk_err = -err;
+		}
+
+		return datagrams;
+	}
+
+	return err;
+}
+
+SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg,
+		unsigned int, vlen, unsigned int, flags,
+		struct timespec __user *, timeout)
+{
+	int datagrams;
+	struct timespec timeout_sys;
+
+	if (!timeout)
+		return __sys_recvmmsg(fd, mmsg, vlen, flags, NULL);
+
+	if (copy_from_user(&timeout_sys, timeout, sizeof(timeout_sys)))
+		return -EFAULT;
+
+	datagrams = __sys_recvmmsg(fd, mmsg, vlen, flags, &timeout_sys);
+
+	if (datagrams > 0 &&
+	    copy_to_user(timeout, &timeout_sys, sizeof(timeout_sys)))
+		datagrams = -EFAULT;
+
+	return datagrams;
+}
+
+#ifdef __ARCH_WANT_SYS_SOCKETCALL
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned long))
-static const unsigned char nargs[19]={
+static const unsigned char nargs[20] = {
 	AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
 	AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
 	AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
-	AL(4)
+	AL(4),AL(5)
 };
 
 #undef AL
@@ -2100,7 +2284,7 @@
 	int err;
 	unsigned int len;
 
-	if (call < 1 || call > SYS_ACCEPT4)
+	if (call < 1 || call > SYS_RECVMMSG)
 		return -EINVAL;
 
 	len = nargs[call];
@@ -2178,6 +2362,10 @@
 	case SYS_RECVMSG:
 		err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
+	case SYS_RECVMMSG:
+		err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3],
+				   (struct timespec __user *)a[4]);
+		break;
 	case SYS_ACCEPT4:
 		err = sys_accept4(a0, (struct sockaddr __user *)a1,
 				  (int __user *)a[2], a[3]);
@@ -2300,6 +2488,552 @@
 #endif				/* CONFIG_PROC_FS */
 
 #ifdef CONFIG_COMPAT
+static int do_siocgstamp(struct net *net, struct socket *sock,
+			 unsigned int cmd, struct compat_timeval __user *up)
+{
+	mm_segment_t old_fs = get_fs();
+	struct timeval ktv;
+	int err;
+
+	set_fs(KERNEL_DS);
+	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv);
+	set_fs(old_fs);
+	if (!err) {
+		err = put_user(ktv.tv_sec, &up->tv_sec);
+		err |= __put_user(ktv.tv_usec, &up->tv_usec);
+	}
+	return err;
+}
+
+static int do_siocgstampns(struct net *net, struct socket *sock,
+			 unsigned int cmd, struct compat_timespec __user *up)
+{
+	mm_segment_t old_fs = get_fs();
+	struct timespec kts;
+	int err;
+
+	set_fs(KERNEL_DS);
+	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts);
+	set_fs(old_fs);
+	if (!err) {
+		err = put_user(kts.tv_sec, &up->tv_sec);
+		err |= __put_user(kts.tv_nsec, &up->tv_nsec);
+	}
+	return err;
+}
+
+static int dev_ifname32(struct net *net, struct compat_ifreq __user *uifr32)
+{
+	struct ifreq __user *uifr;
+	int err;
+
+	uifr = compat_alloc_user_space(sizeof(struct ifreq));
+	if (copy_in_user(uifr, uifr32, sizeof(struct compat_ifreq)))
+		return -EFAULT;
+
+	err = dev_ioctl(net, SIOCGIFNAME, uifr);
+	if (err)
+		return err;
+
+	if (copy_in_user(uifr32, uifr, sizeof(struct compat_ifreq)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int dev_ifconf(struct net *net, struct compat_ifconf __user *uifc32)
+{
+	struct compat_ifconf ifc32;
+	struct ifconf ifc;
+	struct ifconf __user *uifc;
+	struct compat_ifreq __user *ifr32;
+	struct ifreq __user *ifr;
+	unsigned int i, j;
+	int err;
+
+	if (copy_from_user(&ifc32, uifc32, sizeof(struct compat_ifconf)))
+		return -EFAULT;
+
+	if (ifc32.ifcbuf == 0) {
+		ifc32.ifc_len = 0;
+		ifc.ifc_len = 0;
+		ifc.ifc_req = NULL;
+		uifc = compat_alloc_user_space(sizeof(struct ifconf));
+	} else {
+		size_t len =((ifc32.ifc_len / sizeof (struct compat_ifreq)) + 1) *
+			sizeof (struct ifreq);
+		uifc = compat_alloc_user_space(sizeof(struct ifconf) + len);
+		ifc.ifc_len = len;
+		ifr = ifc.ifc_req = (void __user *)(uifc + 1);
+		ifr32 = compat_ptr(ifc32.ifcbuf);
+		for (i = 0; i < ifc32.ifc_len; i += sizeof (struct compat_ifreq)) {
+			if (copy_in_user(ifr, ifr32, sizeof(struct compat_ifreq)))
+				return -EFAULT;
+			ifr++;
+			ifr32++;
+		}
+	}
+	if (copy_to_user(uifc, &ifc, sizeof(struct ifconf)))
+		return -EFAULT;
+
+	err = dev_ioctl(net, SIOCGIFCONF, uifc);
+	if (err)
+		return err;
+
+	if (copy_from_user(&ifc, uifc, sizeof(struct ifconf)))
+		return -EFAULT;
+
+	ifr = ifc.ifc_req;
+	ifr32 = compat_ptr(ifc32.ifcbuf);
+	for (i = 0, j = 0;
+             i + sizeof (struct compat_ifreq) <= ifc32.ifc_len && j < ifc.ifc_len;
+	     i += sizeof (struct compat_ifreq), j += sizeof (struct ifreq)) {
+		if (copy_in_user(ifr32, ifr, sizeof (struct compat_ifreq)))
+			return -EFAULT;
+		ifr32++;
+		ifr++;
+	}
+
+	if (ifc32.ifcbuf == 0) {
+		/* Translate from 64-bit structure multiple to
+		 * a 32-bit one.
+		 */
+		i = ifc.ifc_len;
+		i = ((i / sizeof(struct ifreq)) * sizeof(struct compat_ifreq));
+		ifc32.ifc_len = i;
+	} else {
+		ifc32.ifc_len = i;
+	}
+	if (copy_to_user(uifc32, &ifc32, sizeof(struct compat_ifconf)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static int ethtool_ioctl(struct net *net, struct compat_ifreq __user *ifr32)
+{
+	struct ifreq __user *ifr;
+	u32 data;
+	void __user *datap;
+
+	ifr = compat_alloc_user_space(sizeof(*ifr));
+
+	if (copy_in_user(&ifr->ifr_name, &ifr32->ifr_name, IFNAMSIZ))
+		return -EFAULT;
+
+	if (get_user(data, &ifr32->ifr_ifru.ifru_data))
+		return -EFAULT;
+
+	datap = compat_ptr(data);
+	if (put_user(datap, &ifr->ifr_ifru.ifru_data))
+		return -EFAULT;
+
+	return dev_ioctl(net, SIOCETHTOOL, ifr);
+}
+
+static int compat_siocwandev(struct net *net, struct compat_ifreq __user *uifr32)
+{
+	void __user *uptr;
+	compat_uptr_t uptr32;
+	struct ifreq __user *uifr;
+
+	uifr = compat_alloc_user_space(sizeof (*uifr));
+	if (copy_in_user(uifr, uifr32, sizeof(struct compat_ifreq)))
+		return -EFAULT;
+
+	if (get_user(uptr32, &uifr32->ifr_settings.ifs_ifsu))
+		return -EFAULT;
+
+	uptr = compat_ptr(uptr32);
+
+	if (put_user(uptr, &uifr->ifr_settings.ifs_ifsu.raw_hdlc))
+		return -EFAULT;
+
+	return dev_ioctl(net, SIOCWANDEV, uifr);
+}
+
+static int bond_ioctl(struct net *net, unsigned int cmd,
+			 struct compat_ifreq __user *ifr32)
+{
+	struct ifreq kifr;
+	struct ifreq __user *uifr;
+	mm_segment_t old_fs;
+	int err;
+	u32 data;
+	void __user *datap;
+
+	switch (cmd) {
+	case SIOCBONDENSLAVE:
+	case SIOCBONDRELEASE:
+	case SIOCBONDSETHWADDR:
+	case SIOCBONDCHANGEACTIVE:
+		if (copy_from_user(&kifr, ifr32, sizeof(struct compat_ifreq)))
+			return -EFAULT;
+
+		old_fs = get_fs();
+		set_fs (KERNEL_DS);
+		err = dev_ioctl(net, cmd, &kifr);
+		set_fs (old_fs);
+
+		return err;
+	case SIOCBONDSLAVEINFOQUERY:
+	case SIOCBONDINFOQUERY:
+		uifr = compat_alloc_user_space(sizeof(*uifr));
+		if (copy_in_user(&uifr->ifr_name, &ifr32->ifr_name, IFNAMSIZ))
+			return -EFAULT;
+
+		if (get_user(data, &ifr32->ifr_ifru.ifru_data))
+			return -EFAULT;
+
+		datap = compat_ptr(data);
+		if (put_user(datap, &uifr->ifr_ifru.ifru_data))
+			return -EFAULT;
+
+		return dev_ioctl(net, cmd, uifr);
+	default:
+		return -EINVAL;
+	};
+}
+
+static int siocdevprivate_ioctl(struct net *net, unsigned int cmd,
+				 struct compat_ifreq __user *u_ifreq32)
+{
+	struct ifreq __user *u_ifreq64;
+	char tmp_buf[IFNAMSIZ];
+	void __user *data64;
+	u32 data32;
+
+	if (copy_from_user(&tmp_buf[0], &(u_ifreq32->ifr_ifrn.ifrn_name[0]),
+			   IFNAMSIZ))
+		return -EFAULT;
+	if (__get_user(data32, &u_ifreq32->ifr_ifru.ifru_data))
+		return -EFAULT;
+	data64 = compat_ptr(data32);
+
+	u_ifreq64 = compat_alloc_user_space(sizeof(*u_ifreq64));
+
+	/* Don't check these user accesses, just let that get trapped
+	 * in the ioctl handler instead.
+	 */
+	if (copy_to_user(&u_ifreq64->ifr_ifrn.ifrn_name[0], &tmp_buf[0],
+			 IFNAMSIZ))
+		return -EFAULT;
+	if (__put_user(data64, &u_ifreq64->ifr_ifru.ifru_data))
+		return -EFAULT;
+
+	return dev_ioctl(net, cmd, u_ifreq64);
+}
+
+static int dev_ifsioc(struct net *net, struct socket *sock,
+			 unsigned int cmd, struct compat_ifreq __user *uifr32)
+{
+	struct ifreq __user *uifr;
+	int err;
+
+	uifr = compat_alloc_user_space(sizeof(*uifr));
+	if (copy_in_user(uifr, uifr32, sizeof(*uifr32)))
+		return -EFAULT;
+
+	err = sock_do_ioctl(net, sock, cmd, (unsigned long)uifr);
+
+	if (!err) {
+		switch (cmd) {
+		case SIOCGIFFLAGS:
+		case SIOCGIFMETRIC:
+		case SIOCGIFMTU:
+		case SIOCGIFMEM:
+		case SIOCGIFHWADDR:
+		case SIOCGIFINDEX:
+		case SIOCGIFADDR:
+		case SIOCGIFBRDADDR:
+		case SIOCGIFDSTADDR:
+		case SIOCGIFNETMASK:
+		case SIOCGIFPFLAGS:
+		case SIOCGIFTXQLEN:
+		case SIOCGMIIPHY:
+		case SIOCGMIIREG:
+			if (copy_in_user(uifr32, uifr, sizeof(*uifr32)))
+				err = -EFAULT;
+			break;
+		}
+	}
+	return err;
+}
+
+static int compat_sioc_ifmap(struct net *net, unsigned int cmd,
+			struct compat_ifreq __user *uifr32)
+{
+	struct ifreq ifr;
+	struct compat_ifmap __user *uifmap32;
+	mm_segment_t old_fs;
+	int err;
+
+	uifmap32 = &uifr32->ifr_ifru.ifru_map;
+	err = copy_from_user(&ifr, uifr32, sizeof(ifr.ifr_name));
+	err |= __get_user(ifr.ifr_map.mem_start, &uifmap32->mem_start);
+	err |= __get_user(ifr.ifr_map.mem_end, &uifmap32->mem_end);
+	err |= __get_user(ifr.ifr_map.base_addr, &uifmap32->base_addr);
+	err |= __get_user(ifr.ifr_map.irq, &uifmap32->irq);
+	err |= __get_user(ifr.ifr_map.dma, &uifmap32->dma);
+	err |= __get_user(ifr.ifr_map.port, &uifmap32->port);
+	if (err)
+		return -EFAULT;
+
+	old_fs = get_fs();
+	set_fs (KERNEL_DS);
+	err = dev_ioctl(net, cmd, (void __user *)&ifr);
+	set_fs (old_fs);
+
+	if (cmd == SIOCGIFMAP && !err) {
+		err = copy_to_user(uifr32, &ifr, sizeof(ifr.ifr_name));
+		err |= __put_user(ifr.ifr_map.mem_start, &uifmap32->mem_start);
+		err |= __put_user(ifr.ifr_map.mem_end, &uifmap32->mem_end);
+		err |= __put_user(ifr.ifr_map.base_addr, &uifmap32->base_addr);
+		err |= __put_user(ifr.ifr_map.irq, &uifmap32->irq);
+		err |= __put_user(ifr.ifr_map.dma, &uifmap32->dma);
+		err |= __put_user(ifr.ifr_map.port, &uifmap32->port);
+		if (err)
+			err = -EFAULT;
+	}
+	return err;
+}
+
+static int compat_siocshwtstamp(struct net *net, struct compat_ifreq __user *uifr32)
+{
+	void __user *uptr;
+	compat_uptr_t uptr32;
+	struct ifreq __user *uifr;
+
+	uifr = compat_alloc_user_space(sizeof (*uifr));
+	if (copy_in_user(uifr, uifr32, sizeof(struct compat_ifreq)))
+		return -EFAULT;
+
+	if (get_user(uptr32, &uifr32->ifr_data))
+		return -EFAULT;
+
+	uptr = compat_ptr(uptr32);
+
+	if (put_user(uptr, &uifr->ifr_data))
+		return -EFAULT;
+
+	return dev_ioctl(net, SIOCSHWTSTAMP, uifr);
+}
+
+struct rtentry32 {
+	u32   		rt_pad1;
+	struct sockaddr rt_dst;         /* target address               */
+	struct sockaddr rt_gateway;     /* gateway addr (RTF_GATEWAY)   */
+	struct sockaddr rt_genmask;     /* target network mask (IP)     */
+	unsigned short  rt_flags;
+	short           rt_pad2;
+	u32   		rt_pad3;
+	unsigned char   rt_tos;
+	unsigned char   rt_class;
+	short           rt_pad4;
+	short           rt_metric;      /* +1 for binary compatibility! */
+	/* char * */ u32 rt_dev;        /* forcing the device at add    */
+	u32   		rt_mtu;         /* per route MTU/Window         */
+	u32   		rt_window;      /* Window clamping              */
+	unsigned short  rt_irtt;        /* Initial RTT                  */
+};
+
+struct in6_rtmsg32 {
+	struct in6_addr		rtmsg_dst;
+	struct in6_addr		rtmsg_src;
+	struct in6_addr		rtmsg_gateway;
+	u32			rtmsg_type;
+	u16			rtmsg_dst_len;
+	u16			rtmsg_src_len;
+	u32			rtmsg_metric;
+	u32			rtmsg_info;
+	u32			rtmsg_flags;
+	s32			rtmsg_ifindex;
+};
+
+static int routing_ioctl(struct net *net, struct socket *sock,
+			 unsigned int cmd, void __user *argp)
+{
+	int ret;
+	void *r = NULL;
+	struct in6_rtmsg r6;
+	struct rtentry r4;
+	char devname[16];
+	u32 rtdev;
+	mm_segment_t old_fs = get_fs();
+
+	if (sock && sock->sk && sock->sk->sk_family == AF_INET6) { /* ipv6 */
+		struct in6_rtmsg32 __user *ur6 = argp;
+		ret = copy_from_user (&r6.rtmsg_dst, &(ur6->rtmsg_dst),
+			3 * sizeof(struct in6_addr));
+		ret |= __get_user (r6.rtmsg_type, &(ur6->rtmsg_type));
+		ret |= __get_user (r6.rtmsg_dst_len, &(ur6->rtmsg_dst_len));
+		ret |= __get_user (r6.rtmsg_src_len, &(ur6->rtmsg_src_len));
+		ret |= __get_user (r6.rtmsg_metric, &(ur6->rtmsg_metric));
+		ret |= __get_user (r6.rtmsg_info, &(ur6->rtmsg_info));
+		ret |= __get_user (r6.rtmsg_flags, &(ur6->rtmsg_flags));
+		ret |= __get_user (r6.rtmsg_ifindex, &(ur6->rtmsg_ifindex));
+
+		r = (void *) &r6;
+	} else { /* ipv4 */
+		struct rtentry32 __user *ur4 = argp;
+		ret = copy_from_user (&r4.rt_dst, &(ur4->rt_dst),
+					3 * sizeof(struct sockaddr));
+		ret |= __get_user (r4.rt_flags, &(ur4->rt_flags));
+		ret |= __get_user (r4.rt_metric, &(ur4->rt_metric));
+		ret |= __get_user (r4.rt_mtu, &(ur4->rt_mtu));
+		ret |= __get_user (r4.rt_window, &(ur4->rt_window));
+		ret |= __get_user (r4.rt_irtt, &(ur4->rt_irtt));
+		ret |= __get_user (rtdev, &(ur4->rt_dev));
+		if (rtdev) {
+			ret |= copy_from_user (devname, compat_ptr(rtdev), 15);
+			r4.rt_dev = devname; devname[15] = 0;
+		} else
+			r4.rt_dev = NULL;
+
+		r = (void *) &r4;
+	}
+
+	if (ret) {
+		ret = -EFAULT;
+		goto out;
+	}
+
+	set_fs (KERNEL_DS);
+	ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r);
+	set_fs (old_fs);
+
+out:
+	return ret;
+}
+
+/* Since old style bridge ioctl's endup using SIOCDEVPRIVATE
+ * for some operations; this forces use of the newer bridge-utils that
+ * use compatiable ioctls
+ */
+static int old_bridge_ioctl(compat_ulong_t __user *argp)
+{
+	compat_ulong_t tmp;
+
+	if (get_user(tmp, argp))
+		return -EFAULT;
+	if (tmp == BRCTL_GET_VERSION)
+		return BRCTL_VERSION + 1;
+	return -EINVAL;
+}
+
+static int compat_sock_ioctl_trans(struct file *file, struct socket *sock,
+			 unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = compat_ptr(arg);
+	struct sock *sk = sock->sk;
+	struct net *net = sock_net(sk);
+
+	if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15))
+		return siocdevprivate_ioctl(net, cmd, argp);
+
+	switch (cmd) {
+	case SIOCSIFBR:
+	case SIOCGIFBR:
+		return old_bridge_ioctl(argp);
+	case SIOCGIFNAME:
+		return dev_ifname32(net, argp);
+	case SIOCGIFCONF:
+		return dev_ifconf(net, argp);
+	case SIOCETHTOOL:
+		return ethtool_ioctl(net, argp);
+	case SIOCWANDEV:
+		return compat_siocwandev(net, argp);
+	case SIOCGIFMAP:
+	case SIOCSIFMAP:
+		return compat_sioc_ifmap(net, cmd, argp);
+	case SIOCBONDENSLAVE:
+	case SIOCBONDRELEASE:
+	case SIOCBONDSETHWADDR:
+	case SIOCBONDSLAVEINFOQUERY:
+	case SIOCBONDINFOQUERY:
+	case SIOCBONDCHANGEACTIVE:
+		return bond_ioctl(net, cmd, argp);
+	case SIOCADDRT:
+	case SIOCDELRT:
+		return routing_ioctl(net, sock, cmd, argp);
+	case SIOCGSTAMP:
+		return do_siocgstamp(net, sock, cmd, argp);
+	case SIOCGSTAMPNS:
+		return do_siocgstampns(net, sock, cmd, argp);
+	case SIOCSHWTSTAMP:
+		return compat_siocshwtstamp(net, argp);
+
+	case FIOSETOWN:
+	case SIOCSPGRP:
+	case FIOGETOWN:
+	case SIOCGPGRP:
+	case SIOCBRADDBR:
+	case SIOCBRDELBR:
+	case SIOCGIFVLAN:
+	case SIOCSIFVLAN:
+	case SIOCADDDLCI:
+	case SIOCDELDLCI:
+		return sock_ioctl(file, cmd, arg);
+
+	case SIOCGIFFLAGS:
+	case SIOCSIFFLAGS:
+	case SIOCGIFMETRIC:
+	case SIOCSIFMETRIC:
+	case SIOCGIFMTU:
+	case SIOCSIFMTU:
+	case SIOCGIFMEM:
+	case SIOCSIFMEM:
+	case SIOCGIFHWADDR:
+	case SIOCSIFHWADDR:
+	case SIOCADDMULTI:
+	case SIOCDELMULTI:
+	case SIOCGIFINDEX:
+	case SIOCGIFADDR:
+	case SIOCSIFADDR:
+	case SIOCSIFHWBROADCAST:
+	case SIOCDIFADDR:
+	case SIOCGIFBRDADDR:
+	case SIOCSIFBRDADDR:
+	case SIOCGIFDSTADDR:
+	case SIOCSIFDSTADDR:
+	case SIOCGIFNETMASK:
+	case SIOCSIFNETMASK:
+	case SIOCSIFPFLAGS:
+	case SIOCGIFPFLAGS:
+	case SIOCGIFTXQLEN:
+	case SIOCSIFTXQLEN:
+	case SIOCBRADDIF:
+	case SIOCBRDELIF:
+	case SIOCSIFNAME:
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		return dev_ifsioc(net, sock, cmd, argp);
+
+	case SIOCSARP:
+	case SIOCGARP:
+	case SIOCDARP:
+	case SIOCATMARK:
+		return sock_do_ioctl(net, sock, cmd, arg);
+	}
+
+	/* Prevent warning from compat_sys_ioctl, these always
+	 * result in -EINVAL in the native case anyway. */
+	switch (cmd) {
+	case SIOCRTMSG:
+	case SIOCGIFCOUNT:
+	case SIOCSRARP:
+	case SIOCGRARP:
+	case SIOCDRARP:
+	case SIOCSIFLINK:
+	case SIOCGIFSLAVE:
+	case SIOCSIFSLAVE:
+		return -EINVAL;
+	}
+
+	return -ENOIOCTLCMD;
+}
+
 static long compat_sock_ioctl(struct file *file, unsigned cmd,
 			      unsigned long arg)
 {
@@ -2318,6 +3052,9 @@
 	    (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST))
 		ret = compat_wext_handle_ioctl(net, cmd, arg);
 
+	if (ret == -ENOIOCTLCMD)
+		ret = compat_sock_ioctl_trans(file, sock, cmd, arg);
+
 	return ret;
 }
 #endif
diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 54a4e04..7535a7b 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -332,9 +332,9 @@
 		list_add_tail(&new->cr_lru, &free);
 	spin_unlock(&cache->lock);
 found:
-	if (test_bit(RPCAUTH_CRED_NEW, &cred->cr_flags)
-			&& cred->cr_ops->cr_init != NULL
-			&& !(flags & RPCAUTH_LOOKUP_NEW)) {
+	if (test_bit(RPCAUTH_CRED_NEW, &cred->cr_flags) &&
+	    cred->cr_ops->cr_init != NULL &&
+	    !(flags & RPCAUTH_LOOKUP_NEW)) {
 		int res = cred->cr_ops->cr_init(auth, cred);
 		if (res < 0) {
 			put_rpccred(cred);
diff --git a/net/sunrpc/auth_gss/gss_krb5_seqnum.c b/net/sunrpc/auth_gss/gss_krb5_seqnum.c
index f160be6..17562b4 100644
--- a/net/sunrpc/auth_gss/gss_krb5_seqnum.c
+++ b/net/sunrpc/auth_gss/gss_krb5_seqnum.c
@@ -75,8 +75,8 @@
 	if ((code = krb5_decrypt(key, cksum, buf, plain, 8)))
 		return code;
 
-	if ((plain[4] != plain[5]) || (plain[4] != plain[6])
-				   || (plain[4] != plain[7]))
+	if ((plain[4] != plain[5]) || (plain[4] != plain[6]) ||
+	    (plain[4] != plain[7]))
 		return (s32)KG_BAD_SEQ;
 
 	*direction = plain[4];
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index f6c51e5..e34bc53 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -105,8 +105,8 @@
 {
 	struct rsi *item = container_of(a, struct rsi, h);
 	struct rsi *tmp = container_of(b, struct rsi, h);
-	return netobj_equal(&item->in_handle, &tmp->in_handle)
-		&& netobj_equal(&item->in_token, &tmp->in_token);
+	return netobj_equal(&item->in_handle, &tmp->in_handle) &&
+	       netobj_equal(&item->in_token, &tmp->in_token);
 }
 
 static int dup_to_netobj(struct xdr_netobj *dst, char *src, int len)
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index d6eee29..39bddba 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -401,9 +401,8 @@
 		for (; ch; cp= & ch->next, ch= *cp) {
 			if (current_detail->nextcheck > ch->expiry_time)
 				current_detail->nextcheck = ch->expiry_time+1;
-			if (ch->expiry_time >= get_seconds()
-			    && ch->last_refresh >= current_detail->flush_time
-				)
+			if (ch->expiry_time >= get_seconds() &&
+			    ch->last_refresh >= current_detail->flush_time)
 				continue;
 			if (test_and_clear_bit(CACHE_PENDING, &ch->flags))
 				cache_dequeue(current_detail, ch);
diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c
index 952f206..538ca43 100644
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1103,8 +1103,9 @@
 				procp->pc_release(rqstp, NULL, rqstp->rq_resp);
 			goto dropit;
 		}
-		if (*statp == rpc_success && (xdr = procp->pc_encode)
-		 && !xdr(rqstp, resv->iov_base+resv->iov_len, rqstp->rq_resp)) {
+		if (*statp == rpc_success &&
+		    (xdr = procp->pc_encode) &&
+		    !xdr(rqstp, resv->iov_base+resv->iov_len, rqstp->rq_resp)) {
 			dprintk("svc: failed to encode reply\n");
 			/* serv->sv_stats->rpcsystemerr++; */
 			*statp = rpc_system_err;
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index df124f7..b845e22 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -129,8 +129,8 @@
 	struct svc_xprt *xprt =
 		container_of(kref, struct svc_xprt, xpt_ref);
 	struct module *owner = xprt->xpt_class->xcl_owner;
-	if (test_bit(XPT_CACHE_AUTH, &xprt->xpt_flags)
-	    && xprt->xpt_auth_cache != NULL)
+	if (test_bit(XPT_CACHE_AUTH, &xprt->xpt_flags) &&
+	    xprt->xpt_auth_cache != NULL)
 		svcauth_unix_info_release(xprt->xpt_auth_cache);
 	xprt->xpt_ops->xpo_free(xprt);
 	module_put(owner);
@@ -846,8 +846,8 @@
 		 * through, close it. */
 		if (!test_and_set_bit(XPT_OLD, &xprt->xpt_flags))
 			continue;
-		if (atomic_read(&xprt->xpt_ref.refcount) > 1
-		    || test_bit(XPT_BUSY, &xprt->xpt_flags))
+		if (atomic_read(&xprt->xpt_ref.refcount) > 1 ||
+		    test_bit(XPT_BUSY, &xprt->xpt_flags))
 			continue;
 		svc_xprt_get(xprt);
 		list_move(le, &to_be_aged);
diff --git a/net/sunrpc/svcauth.c b/net/sunrpc/svcauth.c
index e64109b..4e9393c 100644
--- a/net/sunrpc/svcauth.c
+++ b/net/sunrpc/svcauth.c
@@ -46,8 +46,8 @@
 	dprintk("svc: svc_authenticate (%d)\n", flavor);
 
 	spin_lock(&authtab_lock);
-	if (flavor >= RPC_AUTH_MAXFLAVOR || !(aops = authtab[flavor])
-			|| !try_module_get(aops->owner)) {
+	if (flavor >= RPC_AUTH_MAXFLAVOR || !(aops = authtab[flavor]) ||
+	    !try_module_get(aops->owner)) {
 		spin_unlock(&authtab_lock);
 		*authp = rpc_autherr_badcred;
 		return SVC_DENIED;
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 117f68a..4a8f655 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -125,8 +125,8 @@
 {
 	struct ip_map *orig = container_of(corig, struct ip_map, h);
 	struct ip_map *new = container_of(cnew, struct ip_map, h);
-	return strcmp(orig->m_class, new->m_class) == 0
-		&& ipv6_addr_equal(&orig->m_addr, &new->m_addr);
+	return strcmp(orig->m_class, new->m_class) == 0 &&
+	       ipv6_addr_equal(&orig->m_addr, &new->m_addr);
 }
 static void ip_map_init(struct cache_head *cnew, struct cache_head *citem)
 {
@@ -686,8 +686,7 @@
 	case AF_INET:
 		sin = svc_addr_in(rqstp);
 		sin6 = &sin6_storage;
-		ipv6_addr_set(&sin6->sin6_addr, 0, 0,
-				htonl(0x0000FFFF), sin->sin_addr.s_addr);
+		ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, &sin6->sin6_addr);
 		break;
 	case AF_INET6:
 		sin6 = svc_addr_in6(rqstp);
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 1c246a4..870929e 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -272,14 +272,14 @@
 	case PF_INET:
 		len = snprintf(buf, remaining, "ipv4 %s %pI4 %d\n",
 				proto_name,
-				&inet_sk(sk)->rcv_saddr,
-				inet_sk(sk)->num);
+				&inet_sk(sk)->inet_rcv_saddr,
+				inet_sk(sk)->inet_num);
 		break;
 	case PF_INET6:
 		len = snprintf(buf, remaining, "ipv6 %s %pI6 %d\n",
 				proto_name,
 				&inet6_sk(sk)->rcv_saddr,
-				inet_sk(sk)->num);
+				inet_sk(sk)->inet_num);
 		break;
 	default:
 		len = snprintf(buf, remaining, "*unknown-%d*\n",
@@ -1311,7 +1311,7 @@
 	/* Register socket with portmapper */
 	if (*errp >= 0 && pmap_register)
 		*errp = svc_register(serv, inet->sk_family, inet->sk_protocol,
-				     ntohs(inet_sk(inet)->sport));
+				     ntohs(inet_sk(inet)->inet_sport));
 
 	if (*errp < 0) {
 		kfree(svsk);
diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 42f9748..e65dcc6 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -139,46 +139,45 @@
 		.data		= &rpc_debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dodebug
+		.proc_handler	= proc_dodebug
 	},
 	{
 		.procname	= "nfs_debug",
 		.data		= &nfs_debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dodebug
+		.proc_handler	= proc_dodebug
 	},
 	{
 		.procname	= "nfsd_debug",
 		.data		= &nfsd_debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dodebug
+		.proc_handler	= proc_dodebug
 	},
 	{
 		.procname	= "nlm_debug",
 		.data		= &nlm_debug,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dodebug
+		.proc_handler	= proc_dodebug
 	},
 	{
 		.procname	= "transports",
 		.maxlen		= 256,
 		.mode		= 0444,
-		.proc_handler	= &proc_do_xprt,
+		.proc_handler	= proc_do_xprt,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static ctl_table sunrpc_table[] = {
 	{
-		.ctl_name	= CTL_SUNRPC,
 		.procname	= "sunrpc",
 		.mode		= 0555,
 		.child		= debug_table
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 #endif
diff --git a/net/sunrpc/xprtrdma/svc_rdma.c b/net/sunrpc/xprtrdma/svc_rdma.c
index 35fb68b..5b8a8ff 100644
--- a/net/sunrpc/xprtrdma/svc_rdma.c
+++ b/net/sunrpc/xprtrdma/svc_rdma.c
@@ -120,8 +120,7 @@
 		.data		= &svcrdma_max_requests,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_max_requests,
 		.extra2		= &max_max_requests
 	},
@@ -130,8 +129,7 @@
 		.data		= &svcrdma_max_req_size,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_max_inline,
 		.extra2		= &max_max_inline
 	},
@@ -140,8 +138,7 @@
 		.data		= &svcrdma_ord,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_ord,
 		.extra2		= &max_ord,
 	},
@@ -151,67 +148,65 @@
 		.data		= &rdma_stat_read,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_recv",
 		.data		= &rdma_stat_recv,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_write",
 		.data		= &rdma_stat_write,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_sq_starve",
 		.data		= &rdma_stat_sq_starve,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_rq_starve",
 		.data		= &rdma_stat_rq_starve,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_rq_poll",
 		.data		= &rdma_stat_rq_poll,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_rq_prod",
 		.data		= &rdma_stat_rq_prod,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_sq_poll",
 		.data		= &rdma_stat_sq_poll,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
 	{
 		.procname	= "rdma_stat_sq_prod",
 		.data		= &rdma_stat_sq_prod,
 		.maxlen		= sizeof(atomic_t),
 		.mode		= 0644,
-		.proc_handler	= &read_reset_stat,
+		.proc_handler	= read_reset_stat,
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 static ctl_table svcrdma_table[] = {
@@ -220,21 +215,16 @@
 		.mode		= 0555,
 		.child		= svcrdma_parm_table
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 static ctl_table svcrdma_root_table[] = {
 	{
-		.ctl_name	= CTL_SUNRPC,
 		.procname	= "sunrpc",
 		.mode		= 0555,
 		.child		= svcrdma_table
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 void svc_rdma_cleanup(void)
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 9e88438..f92e37e 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -337,10 +337,9 @@
 
 static int rdma_read_max_sge(struct svcxprt_rdma *xprt, int sge_count)
 {
-	if ((RDMA_TRANSPORT_IWARP ==
-	     rdma_node_get_transport(xprt->sc_cm_id->
-				     device->node_type))
-	    && sge_count > 1)
+	if ((rdma_node_get_transport(xprt->sc_cm_id->device->node_type) ==
+	     RDMA_TRANSPORT_IWARP) &&
+	    sge_count > 1)
 		return 1;
 	else
 		return min_t(int, sge_count, xprt->sc_max_sge);
diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 9a63f66..7018eef 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -86,79 +86,63 @@
 
 static ctl_table xr_tunables_table[] = {
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname	= "rdma_slot_table_entries",
 		.data		= &xprt_rdma_slot_table_entries,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_slot_table_size,
 		.extra2		= &max_slot_table_size
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname	= "rdma_max_inline_read",
 		.data		= &xprt_rdma_max_inline_read,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname	= "rdma_max_inline_write",
 		.data		= &xprt_rdma_max_inline_write,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname	= "rdma_inline_write_padding",
 		.data		= &xprt_rdma_inline_write_padding,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &zero,
 		.extra2		= &max_padding,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname	= "rdma_memreg_strategy",
 		.data		= &xprt_rdma_memreg_strategy,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_memreg,
 		.extra2		= &max_memreg,
 	},
 	{
-		.ctl_name       = CTL_UNNUMBERED,
 		.procname	= "rdma_pad_optimize",
 		.data		= &xprt_rdma_pad_optimize,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 static ctl_table sunrpc_table[] = {
 	{
-		.ctl_name	= CTL_SUNRPC,
 		.procname	= "sunrpc",
 		.mode		= 0555,
 		.child		= xr_tunables_table
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 #endif
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 465aafc..2209aa8 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -878,8 +878,8 @@
 	 * others indicate a transport condition which has already
 	 * undergone a best-effort.
 	 */
-	if (ep->rep_connected == -ECONNREFUSED
-	    && ++retry_count <= RDMA_CONNECT_RETRY_MAX) {
+	if (ep->rep_connected == -ECONNREFUSED &&
+	    ++retry_count <= RDMA_CONNECT_RETRY_MAX) {
 		dprintk("RPC:       %s: non-peer_reject, retry\n", __func__);
 		goto retry;
 	}
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 37c5475..04732d0 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -81,46 +81,38 @@
  */
 static ctl_table xs_tunables_table[] = {
 	{
-		.ctl_name	= CTL_SLOTTABLE_UDP,
 		.procname	= "udp_slot_table_entries",
 		.data		= &xprt_udp_slot_table_entries,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_slot_table_size,
 		.extra2		= &max_slot_table_size
 	},
 	{
-		.ctl_name	= CTL_SLOTTABLE_TCP,
 		.procname	= "tcp_slot_table_entries",
 		.data		= &xprt_tcp_slot_table_entries,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &min_slot_table_size,
 		.extra2		= &max_slot_table_size
 	},
 	{
-		.ctl_name	= CTL_MIN_RESVPORT,
 		.procname	= "min_resvport",
 		.data		= &xprt_min_resvport,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xprt_min_resvport_limit,
 		.extra2		= &xprt_max_resvport_limit
 	},
 	{
-		.ctl_name	= CTL_MAX_RESVPORT,
 		.procname	= "max_resvport",
 		.data		= &xprt_max_resvport,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_minmax,
-		.strategy	= &sysctl_intvec,
+		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xprt_min_resvport_limit,
 		.extra2		= &xprt_max_resvport_limit
 	},
@@ -129,24 +121,18 @@
 		.data		= &xs_tcp_fin_timeout,
 		.maxlen		= sizeof(xs_tcp_fin_timeout),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= sysctl_jiffies
+		.proc_handler	= proc_dointvec_jiffies,
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 static ctl_table sunrpc_table[] = {
 	{
-		.ctl_name	= CTL_SUNRPC,
 		.procname	= "sunrpc",
 		.mode		= 0555,
 		.child		= xs_tunables_table
 	},
-	{
-		.ctl_name = 0,
-	},
+	{ },
 };
 
 #endif
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
index 689fdef..a7eac00 100644
--- a/net/tipc/cluster.c
+++ b/net/tipc/cluster.c
@@ -437,11 +437,11 @@
 		break;
 	case ROUTE_ADDITION:
 		if (!is_slave(tipc_own_addr)) {
-			assert(!in_own_cluster(c_ptr->addr)
-			       || is_slave(rem_node));
+			assert(!in_own_cluster(c_ptr->addr) ||
+			       is_slave(rem_node));
 		} else {
-			assert(in_own_cluster(c_ptr->addr)
-			       && !is_slave(rem_node));
+			assert(in_own_cluster(c_ptr->addr) &&
+			       !is_slave(rem_node));
 		}
 		n_ptr = c_ptr->nodes[tipc_node(rem_node)];
 		if (!n_ptr)
@@ -451,11 +451,11 @@
 		break;
 	case ROUTE_REMOVAL:
 		if (!is_slave(tipc_own_addr)) {
-			assert(!in_own_cluster(c_ptr->addr)
-			       || is_slave(rem_node));
+			assert(!in_own_cluster(c_ptr->addr) ||
+			       is_slave(rem_node));
 		} else {
-			assert(in_own_cluster(c_ptr->addr)
-			       && !is_slave(rem_node));
+			assert(in_own_cluster(c_ptr->addr) &&
+			       !is_slave(rem_node));
 		}
 		n_ptr = c_ptr->nodes[tipc_node(rem_node)];
 		if (n_ptr)
diff --git a/net/tipc/link.c b/net/tipc/link.c
index dd4c18b..6f50f64 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -378,8 +378,8 @@
 		struct tipc_msg *msg = buf_msg(l_ptr->first_out);
 		u32 length = msg_size(msg);
 
-		if ((msg_user(msg) == MSG_FRAGMENTER)
-		    && (msg_type(msg) == FIRST_FRAGMENT)) {
+		if ((msg_user(msg) == MSG_FRAGMENTER) &&
+		    (msg_type(msg) == FIRST_FRAGMENT)) {
 			length = msg_size(msg_get_wrapped(msg));
 		}
 		if (length) {
@@ -2788,8 +2788,8 @@
 
 	/* Is there an incomplete message waiting for this fragment? */
 
-	while (pbuf && ((msg_seqno(buf_msg(pbuf)) != long_msg_seq_no)
-			|| (msg_orignode(fragm) != msg_orignode(buf_msg(pbuf))))) {
+	while (pbuf && ((msg_seqno(buf_msg(pbuf)) != long_msg_seq_no) ||
+			(msg_orignode(fragm) != msg_orignode(buf_msg(pbuf))))) {
 		prev = pbuf;
 		pbuf = pbuf->next;
 	}
@@ -3325,8 +3325,8 @@
 				      (l_ptr->last_out)), l_ptr->out_queue_size);
 		if ((mod(msg_seqno(buf_msg(l_ptr->last_out)) -
 			 msg_seqno(buf_msg(l_ptr->first_out)))
-		     != (l_ptr->out_queue_size - 1))
-		    || (l_ptr->last_out->next != NULL)) {
+		     != (l_ptr->out_queue_size - 1)) ||
+		    (l_ptr->last_out->next != NULL)) {
 			tipc_printf(buf, "\nSend queue inconsistency\n");
 			tipc_printf(buf, "first_out= %x ", l_ptr->first_out);
 			tipc_printf(buf, "next_out= %x ", l_ptr->next_out);
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index e6d9abf..1ea64f0 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -177,6 +177,7 @@
  * @net: network namespace (must be default network)
  * @sock: pre-allocated socket structure
  * @protocol: protocol indicator (must be 0)
+ * @kern: caused by kernel or by userspace?
  *
  * This routine creates additional data structures used by the TIPC socket,
  * initializes them, and links them together.
@@ -184,7 +185,8 @@
  * Returns 0 on success, errno otherwise
  */
 
-static int tipc_create(struct net *net, struct socket *sock, int protocol)
+static int tipc_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	const struct proto_ops *ops;
 	socket_state state;
@@ -193,7 +195,7 @@
 
 	/* Validate arguments */
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	if (unlikely(protocol != 0))
@@ -1134,13 +1136,11 @@
 
 	/* Loop around if more data is required */
 
-	if ((sz_copied < buf_len)    /* didn't get all requested data */
-	    && (!skb_queue_empty(&sk->sk_receive_queue) ||
-		(flags & MSG_WAITALL))
-				     /* ... and more is ready or required */
-	    && (!(flags & MSG_PEEK)) /* ... and aren't just peeking at data */
-	    && (!err)                /* ... and haven't reached a FIN */
-	    )
+	if ((sz_copied < buf_len) &&	/* didn't get all requested data */
+	    (!skb_queue_empty(&sk->sk_receive_queue) ||
+	     (flags & MSG_WAITALL)) &&	/* and more is ready or required */
+	    (!(flags & MSG_PEEK)) &&	/* and aren't just peeking at data */
+	    (!err))			/* and haven't reached a FIN */
 		goto restart;
 
 exit:
@@ -1528,7 +1528,7 @@
 
 	buf = skb_peek(&sk->sk_receive_queue);
 
-	res = tipc_create(sock_net(sock->sk), new_sock, 0);
+	res = tipc_create(sock_net(sock->sk), new_sock, 0, 0);
 	if (!res) {
 		struct sock *new_sk = new_sock->sk;
 		struct tipc_sock *new_tsock = tipc_sk(new_sk);
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 0747d8a..ac91f0d 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -364,9 +364,9 @@
 	sub->seq.upper = htohl(s->seq.upper, swap);
 	sub->timeout = htohl(s->timeout, swap);
 	sub->filter = htohl(s->filter, swap);
-	if ((!(sub->filter & TIPC_SUB_PORTS)
-	     == !(sub->filter & TIPC_SUB_SERVICE))
-	    || (sub->seq.lower > sub->seq.upper)) {
+	if ((!(sub->filter & TIPC_SUB_PORTS) ==
+	     !(sub->filter & TIPC_SUB_SERVICE)) ||
+	    (sub->seq.lower > sub->seq.upper)) {
 		warn("Subscription rejected, illegal request\n");
 		kfree(sub);
 		subscr_terminate(subscriber);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index fc820cd..f255119 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -621,7 +621,8 @@
 	return sk;
 }
 
-static int unix_create(struct net *net, struct socket *sock, int protocol)
+static int unix_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	if (protocol && protocol != PF_UNIX)
 		return -EPROTONOSUPPORT;
@@ -1032,8 +1033,8 @@
 		goto out;
 	addr_len = err;
 
-	if (test_bit(SOCK_PASSCRED, &sock->flags)
-		&& !u->addr && (err = unix_autobind(sock)) != 0)
+	if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr &&
+	    (err = unix_autobind(sock)) != 0)
 		goto out;
 
 	timeo = sock_sndtimeo(sk, flags & O_NONBLOCK);
@@ -1258,7 +1259,7 @@
 {
 	struct sock *sk = sock->sk;
 	struct unix_sock *u;
-	struct sockaddr_un *sunaddr = (struct sockaddr_un *)uaddr;
+	DECLARE_SOCKADDR(struct sockaddr_un *, sunaddr, uaddr);
 	int err = 0;
 
 	if (peer) {
@@ -1377,8 +1378,8 @@
 			goto out;
 	}
 
-	if (test_bit(SOCK_PASSCRED, &sock->flags)
-		&& !u->addr && (err = unix_autobind(sock)) != 0)
+	if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
+	    && (err = unix_autobind(sock)) != 0)
 		goto out;
 
 	err = -EMSGSIZE;
@@ -2216,7 +2217,7 @@
 
 #endif
 
-static struct net_proto_family unix_family_ops = {
+static const struct net_proto_family unix_family_ops = {
 	.family = PF_UNIX,
 	.create = unix_create,
 	.owner	= THIS_MODULE,
diff --git a/net/unix/sysctl_net_unix.c b/net/unix/sysctl_net_unix.c
index 83c0930..708f5df 100644
--- a/net/unix/sysctl_net_unix.c
+++ b/net/unix/sysctl_net_unix.c
@@ -16,19 +16,18 @@
 
 static ctl_table unix_table[] = {
 	{
-		.ctl_name	= NET_UNIX_MAX_DGRAM_QLEN,
 		.procname	= "max_dgram_qlen",
 		.data		= &init_net.unx.sysctl_max_dgram_qlen,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
 
 static struct ctl_path unix_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "unix", .ctl_name = NET_UNIX, },
+	{ .procname = "net", },
+	{ .procname = "unix", },
 	{ },
 };
 
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index d631a17..d3bfb6e 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -388,6 +388,8 @@
 	}
 	mutex_lock(&wimax_dev->mutex);
 	result = wimax_dev_is_ready(wimax_dev);
+	if (result == -ENOMEDIUM)
+		result = 0;
 	if (result < 0)
 		goto error_not_ready;
 	result = -ENOSYS;
diff --git a/net/wimax/op-rfkill.c b/net/wimax/op-rfkill.c
index 70ef4df..ae752a6 100644
--- a/net/wimax/op-rfkill.c
+++ b/net/wimax/op-rfkill.c
@@ -107,8 +107,8 @@
 
 	if (state != wimax_dev->rf_hw) {
 		wimax_dev->rf_hw = state;
-		if (wimax_dev->rf_hw == WIMAX_RF_ON
-		    && wimax_dev->rf_sw == WIMAX_RF_ON)
+		if (wimax_dev->rf_hw == WIMAX_RF_ON &&
+		    wimax_dev->rf_sw == WIMAX_RF_ON)
 			wimax_state = WIMAX_ST_READY;
 		else
 			wimax_state = WIMAX_ST_RADIO_OFF;
@@ -163,8 +163,8 @@
 
 	if (state != wimax_dev->rf_sw) {
 		wimax_dev->rf_sw = state;
-		if (wimax_dev->rf_hw == WIMAX_RF_ON
-		    && wimax_dev->rf_sw == WIMAX_RF_ON)
+		if (wimax_dev->rf_hw == WIMAX_RF_ON &&
+		    wimax_dev->rf_sw == WIMAX_RF_ON)
 			wimax_state = WIMAX_ST_READY;
 		else
 			wimax_state = WIMAX_ST_RADIO_OFF;
@@ -305,8 +305,15 @@
 	d_fnstart(3, dev, "(wimax_dev %p state %u)\n", wimax_dev, state);
 	mutex_lock(&wimax_dev->mutex);
 	result = wimax_dev_is_ready(wimax_dev);
-	if (result < 0)
+	if (result < 0) {
+		/* While initializing, < 1.4.3 wimax-tools versions use
+		 * this call to check if the device is a valid WiMAX
+		 * device; so we allow it to proceed always,
+		 * considering the radios are all off. */
+		if (result == -ENOMEDIUM && state == WIMAX_RF_QUERY)
+			result = WIMAX_RF_OFF << 1 | WIMAX_RF_OFF;
 		goto error_not_ready;
+	}
 	switch (state) {
 	case WIMAX_RF_ON:
 	case WIMAX_RF_OFF:
@@ -355,6 +362,7 @@
 
 	wimax_dev->rfkill = rfkill;
 
+	rfkill_init_sw_state(rfkill, 1);
 	result = rfkill_register(wimax_dev->rfkill);
 	if (result < 0)
 		goto error_rfkill_register;
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index 79fb7d7..c886641 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -60,6 +60,14 @@
 #define D_SUBMODULE stack
 #include "debug-levels.h"
 
+static char wimax_debug_params[128];
+module_param_string(debug, wimax_debug_params, sizeof(wimax_debug_params),
+		    0644);
+MODULE_PARM_DESC(debug,
+		 "String of space-separated NAME:VALUE pairs, where NAMEs "
+		 "are the different debug submodules and VALUE are the "
+		 "initial debug value to set.");
+
 /*
  * Authoritative source for the RE_STATE_CHANGE attribute policy
  *
@@ -562,6 +570,9 @@
 	int result, cnt;
 
 	d_fnstart(4, NULL, "()\n");
+	d_parse_params(D_LEVEL, D_LEVEL_SIZE, wimax_debug_params,
+		       "wimax.debug");
+
 	snprintf(wimax_gnl_family.name, sizeof(wimax_gnl_family.name),
 		 "WiMAX");
 	result = genl_register_family(&wimax_gnl_family);
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index abf7ca3..90e93a5 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,3 +1,21 @@
+config WIRELESS_EXT
+	bool
+
+config WEXT_CORE
+	def_bool y
+	depends on CFG80211_WEXT || WIRELESS_EXT
+
+config WEXT_PROC
+	def_bool y
+	depends on PROC_FS
+	depends on WEXT_CORE
+
+config WEXT_SPY
+	bool
+
+config WEXT_PRIV
+	bool
+
 config CFG80211
 	tristate "cfg80211 - wireless configuration API"
 	depends on RFKILL || !RFKILL
@@ -67,14 +85,10 @@
 	  applications instead -- they need to register their network
 	  latency requirement, see Documentation/power/pm_qos_interface.txt.
 
-config CFG80211_DEFAULT_PS_VALUE
-	int
-	default 1 if CFG80211_DEFAULT_PS
-	default 0
-
 config CFG80211_DEBUGFS
 	bool "cfg80211 DebugFS entries"
-	depends on CFG80211 && DEBUG_FS
+	depends on CFG80211
+	depends on DEBUG_FS
 	---help---
 	  You can enable this if you want to debugfs entries for cfg80211.
 
@@ -83,6 +97,7 @@
 config WIRELESS_OLD_REGULATORY
 	bool "Old wireless static regulatory definitions"
 	default n
+	depends on CFG80211
 	---help---
 	  This option enables the old static regulatory information
 	  and uses it within the new framework. This option is available
@@ -94,20 +109,19 @@
 
 	  Say N and if you say Y, please tell us why. The default is N.
 
-config WIRELESS_EXT
-	bool "Wireless extensions"
+config CFG80211_WEXT
+	bool "cfg80211 wireless extensions compatibility"
+	depends on CFG80211
+	select WEXT_CORE
 	default y
-	---help---
-	  This option enables the legacy wireless extensions
-	  (wireless network interface configuration via ioctls.)
-
-	  Say Y unless you've upgraded all your userspace to use
-	  nl80211 instead of wireless extensions.
+	help
+	  Enable this option if you need old userspace for wireless
+	  extensions with cfg80211-based drivers.
 
 config WIRELESS_EXT_SYSFS
 	bool "Wireless extensions sysfs files"
 	default y
-	depends on WIRELESS_EXT && SYSFS
+	depends on WEXT_CORE && SYSFS
 	help
 	  This option enables the deprecated wireless statistics
 	  files in /sys/class/net/*/wireless/. The same information
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 3ecaa91..f07c8dc 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -1,13 +1,17 @@
-obj-$(CONFIG_WIRELESS_EXT) += wext.o
 obj-$(CONFIG_CFG80211) += cfg80211.o
 obj-$(CONFIG_LIB80211) += lib80211.o
 obj-$(CONFIG_LIB80211_CRYPT_WEP) += lib80211_crypt_wep.o
 obj-$(CONFIG_LIB80211_CRYPT_CCMP) += lib80211_crypt_ccmp.o
 obj-$(CONFIG_LIB80211_CRYPT_TKIP) += lib80211_crypt_tkip.o
 
+obj-$(CONFIG_WEXT_CORE) += wext-core.o
+obj-$(CONFIG_WEXT_PROC) += wext-proc.o
+obj-$(CONFIG_WEXT_SPY) += wext-spy.o
+obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
+
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
-cfg80211-$(CONFIG_WIRELESS_EXT) += wext-compat.o wext-sme.o
+cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/net/wireless/core.c b/net/wireless/core.c
index a595f71..c2a2c56 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -22,6 +22,7 @@
 #include "sysfs.h"
 #include "debugfs.h"
 #include "wext-compat.h"
+#include "ethtool.h"
 
 /* name for sysfs, %d is appended */
 #define PHY_NAME "phy"
@@ -44,6 +45,9 @@
 /* for debugfs */
 static struct dentry *ieee80211_debugfs_dir;
 
+/* for the cleanup, scan and event works */
+struct workqueue_struct *cfg80211_wq;
+
 /* requires cfg80211_mutex to be held! */
 struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
 {
@@ -230,7 +234,7 @@
 	struct wireless_dev *wdev;
 	int err = 0;
 
-	if (!rdev->wiphy.netnsok)
+	if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK))
 		return -EOPNOTSUPP;
 
 	list_for_each_entry(wdev, &rdev->netdev_list, list) {
@@ -359,11 +363,17 @@
 	INIT_LIST_HEAD(&rdev->bss_list);
 	INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
 
+#ifdef CONFIG_CFG80211_WEXT
+	rdev->wiphy.wext = &cfg80211_wext_handler;
+#endif
+
 	device_initialize(&rdev->wiphy.dev);
 	rdev->wiphy.dev.class = &ieee80211_class;
 	rdev->wiphy.dev.platform_data = rdev;
 
-	rdev->wiphy.ps_default = CONFIG_CFG80211_DEFAULT_PS_VALUE;
+#ifdef CONFIG_CFG80211_DEFAULT_PS
+	rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
+#endif
 
 	wiphy_net_set(&rdev->wiphy, &init_net);
 
@@ -478,7 +488,7 @@
 	if (IS_ERR(rdev->wiphy.debugfsdir))
 		rdev->wiphy.debugfsdir = NULL;
 
-	if (wiphy->custom_regulatory) {
+	if (wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
 		struct regulatory_request request;
 
 		request.wiphy_idx = get_wiphy_idx(wiphy);
@@ -542,7 +552,7 @@
 	 * First remove the hardware from everywhere, this makes
 	 * it impossible to find from userspace.
 	 */
-	cfg80211_debugfs_rdev_del(rdev);
+	debugfs_remove_recursive(rdev->wiphy.debugfsdir);
 	list_del(&rdev->list);
 
 	/*
@@ -565,7 +575,6 @@
 
 	cfg80211_rdev_list_generation++;
 	device_del(&rdev->wiphy.dev);
-	debugfs_remove(rdev->wiphy.debugfsdir);
 
 	mutex_unlock(&cfg80211_mutex);
 
@@ -626,6 +635,10 @@
 	dev_put(wdev->netdev);
 }
 
+static struct device_type wiphy_type = {
+	.name	= "wlan",
+};
+
 static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 					 unsigned long state,
 					 void *ndev)
@@ -642,6 +655,9 @@
 	WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
 
 	switch (state) {
+	case NETDEV_POST_INIT:
+		SET_NETDEV_DEVTYPE(dev, &wiphy_type);
+		break;
 	case NETDEV_REGISTER:
 		/*
 		 * NB: cannot take rdev->mtx here because this may be
@@ -666,13 +682,14 @@
 		wdev->netdev = dev;
 		wdev->sme_state = CFG80211_SME_IDLE;
 		mutex_unlock(&rdev->devlist_mtx);
-#ifdef CONFIG_WIRELESS_EXT
-		if (!dev->wireless_handlers)
-			dev->wireless_handlers = &cfg80211_wext_handler;
+#ifdef CONFIG_CFG80211_WEXT
 		wdev->wext.default_key = -1;
 		wdev->wext.default_mgmt_key = -1;
 		wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
-		wdev->wext.ps = wdev->wiphy->ps_default;
+		if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
+			wdev->wext.ps = true;
+		else
+			wdev->wext.ps = false;
 		wdev->wext.ps_timeout = 100;
 		if (rdev->ops->set_power_mgmt)
 			if (rdev->ops->set_power_mgmt(wdev->wiphy, dev,
@@ -682,6 +699,12 @@
 				wdev->wext.ps = false;
 			}
 #endif
+		if (!dev->ethtool_ops)
+			dev->ethtool_ops = &cfg80211_ethtool_ops;
+
+		if ((wdev->iftype == NL80211_IFTYPE_STATION ||
+		     wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
+			dev->priv_flags |= IFF_DONT_BRIDGE;
 		break;
 	case NETDEV_GOING_DOWN:
 		switch (wdev->iftype) {
@@ -690,7 +713,7 @@
 			break;
 		case NL80211_IFTYPE_STATION:
 			wdev_lock(wdev);
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.ie);
 			wdev->wext.ie = NULL;
 			wdev->wext.ie_len = 0;
@@ -707,7 +730,7 @@
 		break;
 	case NETDEV_DOWN:
 		dev_hold(dev);
-		schedule_work(&wdev->cleanup_work);
+		queue_work(cfg80211_wq, &wdev->cleanup_work);
 		break;
 	case NETDEV_UP:
 		/*
@@ -722,7 +745,7 @@
 			mutex_unlock(&rdev->devlist_mtx);
 			dev_put(dev);
 		}
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 		cfg80211_lock_rdev(rdev);
 		mutex_lock(&rdev->devlist_mtx);
 		wdev_lock(wdev);
@@ -760,7 +783,7 @@
 			sysfs_remove_link(&dev->dev.kobj, "phy80211");
 			list_del_init(&wdev->list);
 			rdev->devlist_generation++;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.keys);
 #endif
 		}
@@ -825,8 +848,14 @@
 	if (err)
 		goto out_fail_reg;
 
+	cfg80211_wq = create_singlethread_workqueue("cfg80211");
+	if (!cfg80211_wq)
+		goto out_fail_wq;
+
 	return 0;
 
+out_fail_wq:
+	regulatory_exit();
 out_fail_reg:
 	debugfs_remove(ieee80211_debugfs_dir);
 out_fail_nl80211:
@@ -848,5 +877,6 @@
 	wiphy_sysfs_exit();
 	regulatory_exit();
 	unregister_pernet_device(&cfg80211_pernet_ops);
+	destroy_workqueue(cfg80211_wq);
 }
 module_exit(cfg80211_exit);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 68b3219..4ef3efc 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -72,17 +72,6 @@
 	/* current channel */
 	struct ieee80211_channel *channel;
 
-#ifdef CONFIG_CFG80211_DEBUGFS
-	/* Debugfs entries */
-	struct wiphy_debugfsdentries {
-		struct dentry *rts_threshold;
-		struct dentry *fragmentation_threshold;
-		struct dentry *short_retry_limit;
-		struct dentry *long_retry_limit;
-		struct dentry *ht40allow_map;
-	} debugfs;
-#endif
-
 	/* must be last because of the way we do wiphy_priv(),
 	 * and it should at least be aligned to NETDEV_ALIGN */
 	struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -102,6 +91,8 @@
 	return (wiphy_idx >= 0);
 }
 
+
+extern struct workqueue_struct *cfg80211_wq;
 extern struct mutex cfg80211_mutex;
 extern struct list_head cfg80211_rdev_list;
 extern int cfg80211_rdev_list_generation;
@@ -284,6 +275,8 @@
 		       struct cfg80211_ibss_params *params,
 		       struct cfg80211_cached_keys *connkeys);
 void cfg80211_clear_ibss(struct net_device *dev, bool nowext);
+int __cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+			  struct net_device *dev, bool nowext);
 int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
 			struct net_device *dev, bool nowext);
 void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid);
diff --git a/net/wireless/debugfs.c b/net/wireless/debugfs.c
index 13d93d8..2e48956 100644
--- a/net/wireless/debugfs.c
+++ b/net/wireless/debugfs.c
@@ -104,11 +104,7 @@
 };
 
 #define DEBUGFS_ADD(name)						\
-	rdev->debugfs.name = debugfs_create_file(#name, S_IRUGO, phyd,	\
-						  &rdev->wiphy, &name## _ops);
-#define DEBUGFS_DEL(name)						\
-	debugfs_remove(rdev->debugfs.name);				\
-	rdev->debugfs.name = NULL;
+	debugfs_create_file(#name, S_IRUGO, phyd, &rdev->wiphy, &name## _ops);
 
 void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev)
 {
@@ -120,12 +116,3 @@
 	DEBUGFS_ADD(long_retry_limit);
 	DEBUGFS_ADD(ht40allow_map);
 }
-
-void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev)
-{
-	DEBUGFS_DEL(rts_threshold);
-	DEBUGFS_DEL(fragmentation_threshold);
-	DEBUGFS_DEL(short_retry_limit);
-	DEBUGFS_DEL(long_retry_limit);
-	DEBUGFS_DEL(ht40allow_map);
-}
diff --git a/net/wireless/debugfs.h b/net/wireless/debugfs.h
index 6419b6d..74fdd38 100644
--- a/net/wireless/debugfs.h
+++ b/net/wireless/debugfs.h
@@ -3,12 +3,9 @@
 
 #ifdef CONFIG_CFG80211_DEBUGFS
 void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev);
-void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev);
 #else
 static inline
 void cfg80211_debugfs_rdev_add(struct cfg80211_registered_device *rdev) {}
-static inline
-void cfg80211_debugfs_rdev_del(struct cfg80211_registered_device *rdev) {}
 #endif
 
 #endif /* __CFG80211_DEBUGFS_H */
diff --git a/net/wireless/ethtool.c b/net/wireless/ethtool.c
new file mode 100644
index 0000000..ca4c825b
--- /dev/null
+++ b/net/wireless/ethtool.c
@@ -0,0 +1,45 @@
+#include <linux/utsname.h>
+#include <net/cfg80211.h>
+#include "ethtool.h"
+
+static void cfg80211_get_drvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	strlcpy(info->driver, wiphy_dev(wdev->wiphy)->driver->name,
+		sizeof(info->driver));
+
+	strlcpy(info->version, init_utsname()->release, sizeof(info->version));
+
+	if (wdev->wiphy->fw_version[0])
+		strncpy(info->fw_version, wdev->wiphy->fw_version,
+			sizeof(info->fw_version));
+	else
+		strncpy(info->fw_version, "N/A", sizeof(info->fw_version));
+
+	strlcpy(info->bus_info, dev_name(wiphy_dev(wdev->wiphy)),
+		sizeof(info->bus_info));
+}
+
+static int cfg80211_get_regs_len(struct net_device *dev)
+{
+	/* For now, return 0... */
+	return 0;
+}
+
+static void cfg80211_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+			void *data)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	regs->version = wdev->wiphy->hw_version;
+	regs->len = 0;
+}
+
+const struct ethtool_ops cfg80211_ethtool_ops = {
+	.get_drvinfo = cfg80211_get_drvinfo,
+	.get_regs_len = cfg80211_get_regs_len,
+	.get_regs = cfg80211_get_regs,
+	.get_link = ethtool_op_get_link,
+};
diff --git a/net/wireless/ethtool.h b/net/wireless/ethtool.h
new file mode 100644
index 0000000..695ecad
--- /dev/null
+++ b/net/wireless/ethtool.h
@@ -0,0 +1,6 @@
+#ifndef __CFG80211_ETHTOOL__
+#define __CFG80211_ETHTOOL__
+
+extern const struct ethtool_ops cfg80211_ethtool_ops;
+
+#endif /* __CFG80211_ETHTOOL__ */
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index c883389..6ef5a49 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -15,7 +15,7 @@
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_bss *bss;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -44,7 +44,7 @@
 
 	nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
 				GFP_KERNEL);
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	memset(&wrqu, 0, sizeof(wrqu));
 	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
@@ -70,7 +70,7 @@
 	spin_lock_irqsave(&wdev->event_lock, flags);
 	list_add_tail(&ev->list, &wdev->event_list);
 	spin_unlock_irqrestore(&wdev->event_lock, flags);
-	schedule_work(&rdev->event_work);
+	queue_work(cfg80211_wq, &rdev->event_work);
 }
 EXPORT_SYMBOL(cfg80211_ibss_joined);
 
@@ -96,7 +96,7 @@
 		kfree(wdev->connect_keys);
 	wdev->connect_keys = connkeys;
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	wdev->wext.ibss.channel = params->channel;
 #endif
 	err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
@@ -154,7 +154,7 @@
 
 	wdev->current_bss = NULL;
 	wdev->ssid_len = 0;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!nowext)
 		wdev->wext.ibss.ssid_len = 0;
 #endif
@@ -169,8 +169,8 @@
 	wdev_unlock(wdev);
 }
 
-static int __cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
-				 struct net_device *dev, bool nowext)
+int __cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
+			  struct net_device *dev, bool nowext)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	int err;
@@ -203,7 +203,7 @@
 	return err;
 }
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
 			    struct wireless_dev *wdev)
 {
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 0a6b7a0..1001db4 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -62,7 +62,6 @@
 	u8 *ie = mgmt->u.assoc_resp.variable;
 	int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
 	struct cfg80211_internal_bss *bss = NULL;
-	bool need_connect_result = true;
 
 	wdev_lock(wdev);
 
@@ -97,7 +96,6 @@
 		WARN_ON(!bss);
 	} else if (wdev->conn) {
 		cfg80211_sme_failed_assoc(wdev);
-		need_connect_result = false;
 		/*
 		 * do not call connect_result() now because the
 		 * sme will schedule work that does it later.
@@ -130,7 +128,7 @@
 }
 EXPORT_SYMBOL(cfg80211_send_rx_assoc);
 
-static void __cfg80211_send_deauth(struct net_device *dev,
+void __cfg80211_send_deauth(struct net_device *dev,
 				   const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -139,7 +137,6 @@
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
 	const u8 *bssid = mgmt->bssid;
 	int i;
-	bool done = false;
 
 	ASSERT_WDEV_LOCK(wdev);
 
@@ -147,7 +144,6 @@
 
 	if (wdev->current_bss &&
 	    memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
-		done = true;
 		cfg80211_unhold_bss(wdev->current_bss);
 		cfg80211_put_bss(&wdev->current_bss->pub);
 		wdev->current_bss = NULL;
@@ -157,7 +153,6 @@
 			cfg80211_unhold_bss(wdev->auth_bsses[i]);
 			cfg80211_put_bss(&wdev->auth_bsses[i]->pub);
 			wdev->auth_bsses[i] = NULL;
-			done = true;
 			break;
 		}
 		if (wdev->authtry_bsses[i] &&
@@ -165,13 +160,10 @@
 			cfg80211_unhold_bss(wdev->authtry_bsses[i]);
 			cfg80211_put_bss(&wdev->authtry_bsses[i]->pub);
 			wdev->authtry_bsses[i] = NULL;
-			done = true;
 			break;
 		}
 	}
 
-	WARN_ON(!done);
-
 	if (wdev->sme_state == CFG80211_SME_CONNECTED) {
 		u16 reason_code;
 		bool from_ap;
@@ -186,27 +178,19 @@
 					  false, NULL);
 	}
 }
+EXPORT_SYMBOL(__cfg80211_send_deauth);
 
-
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
-			  void *cookie)
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 
-	BUG_ON(cookie && wdev != cookie);
-
-	if (cookie) {
-		/* called within callback */
-		__cfg80211_send_deauth(dev, buf, len);
-	} else {
-		wdev_lock(wdev);
-		__cfg80211_send_deauth(dev, buf, len);
-		wdev_unlock(wdev);
-	}
+	wdev_lock(wdev);
+	__cfg80211_send_deauth(dev, buf, len);
+	wdev_unlock(wdev);
 }
 EXPORT_SYMBOL(cfg80211_send_deauth);
 
-static void __cfg80211_send_disassoc(struct net_device *dev,
+void __cfg80211_send_disassoc(struct net_device *dev,
 				     const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -247,40 +231,24 @@
 	from_ap = memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0;
 	__cfg80211_disconnected(dev, NULL, 0, reason_code, from_ap);
 }
+EXPORT_SYMBOL(__cfg80211_send_disassoc);
 
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
-			    void *cookie)
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 
-	BUG_ON(cookie && wdev != cookie);
-
-	if (cookie) {
-		/* called within callback */
-		__cfg80211_send_disassoc(dev, buf, len);
-	} else {
-		wdev_lock(wdev);
-		__cfg80211_send_disassoc(dev, buf, len);
-		wdev_unlock(wdev);
-	}
+	wdev_lock(wdev);
+	__cfg80211_send_disassoc(dev, buf, len);
+	wdev_unlock(wdev);
 }
 EXPORT_SYMBOL(cfg80211_send_disassoc);
 
-void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr)
+static void __cfg80211_auth_remove(struct wireless_dev *wdev, const u8 *addr)
 {
-	struct wireless_dev *wdev = dev->ieee80211_ptr;
-	struct wiphy *wiphy = wdev->wiphy;
-	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
 	int i;
 	bool done = false;
 
-	wdev_lock(wdev);
-
-	nl80211_send_auth_timeout(rdev, dev, addr, GFP_KERNEL);
-	if (wdev->sme_state == CFG80211_SME_CONNECTING)
-		__cfg80211_connect_result(dev, addr, NULL, 0, NULL, 0,
-					  WLAN_STATUS_UNSPECIFIED_FAILURE,
-					  false, NULL);
+	ASSERT_WDEV_LOCK(wdev);
 
 	for (i = 0; addr && i < MAX_AUTH_BSSES; i++) {
 		if (wdev->authtry_bsses[i] &&
@@ -295,6 +263,29 @@
 	}
 
 	WARN_ON(!done);
+}
+
+void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr)
+{
+	__cfg80211_auth_remove(dev->ieee80211_ptr, addr);
+}
+EXPORT_SYMBOL(__cfg80211_auth_canceled);
+
+void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct wiphy *wiphy = wdev->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+	wdev_lock(wdev);
+
+	nl80211_send_auth_timeout(rdev, dev, addr, GFP_KERNEL);
+	if (wdev->sme_state == CFG80211_SME_CONNECTING)
+		__cfg80211_connect_result(dev, addr, NULL, 0, NULL, 0,
+					  WLAN_STATUS_UNSPECIFIED_FAILURE,
+					  false, NULL);
+
+	__cfg80211_auth_remove(wdev, addr);
 
 	wdev_unlock(wdev);
 }
@@ -340,7 +331,7 @@
 {
 	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 	char *buf = kmalloc(128, gfp);
 
@@ -469,12 +460,23 @@
 	struct cfg80211_assoc_request req;
 	struct cfg80211_internal_bss *bss;
 	int i, err, slot = -1;
+	bool was_connected = false;
 
 	ASSERT_WDEV_LOCK(wdev);
 
 	memset(&req, 0, sizeof(req));
 
-	if (wdev->current_bss)
+	if (wdev->current_bss && prev_bssid &&
+	    memcmp(wdev->current_bss->pub.bssid, prev_bssid, ETH_ALEN) == 0) {
+		/*
+		 * Trying to reassociate: Allow this to proceed and let the old
+		 * association to be dropped when the new one is completed.
+		 */
+		if (wdev->sme_state == CFG80211_SME_CONNECTED) {
+			was_connected = true;
+			wdev->sme_state = CFG80211_SME_CONNECTING;
+		}
+	} else if (wdev->current_bss)
 		return -EALREADY;
 
 	req.ie = ie;
@@ -484,8 +486,11 @@
 	req.prev_bssid = prev_bssid;
 	req.bss = cfg80211_get_bss(&rdev->wiphy, chan, bssid, ssid, ssid_len,
 				   WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
-	if (!req.bss)
+	if (!req.bss) {
+		if (was_connected)
+			wdev->sme_state = CFG80211_SME_CONNECTED;
 		return -ENOENT;
+	}
 
 	bss = bss_from_pub(req.bss);
 
@@ -503,6 +508,8 @@
 
 	err = rdev->ops->assoc(&rdev->wiphy, dev, &req);
  out:
+	if (err && was_connected)
+		wdev->sme_state = CFG80211_SME_CONNECTED;
 	/* still a reference in wdev->auth_bsses[slot] */
 	cfg80211_put_bss(req.bss);
 	return err;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ca3c92a..a602843 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -138,6 +138,9 @@
 	[NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
 	[NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
 	[NL80211_ATTR_PID] = { .type = NLA_U32 },
+	[NL80211_ATTR_4ADDR] = { .type = NLA_U8 },
+	[NL80211_ATTR_PMKID] = { .type = NLA_BINARY,
+				 .len = WLAN_PMKID_LEN },
 };
 
 /* policy for the attributes */
@@ -151,6 +154,26 @@
 	[NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG },
 };
 
+/* ifidx get helper */
+static int nl80211_get_ifidx(struct netlink_callback *cb)
+{
+	int res;
+
+	res = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
+			  nl80211_fam.attrbuf, nl80211_fam.maxattr,
+			  nl80211_policy);
+	if (res)
+		return res;
+
+	if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
+		return -EINVAL;
+
+	res = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
+	if (!res)
+		return -EINVAL;
+	return res;
+}
+
 /* IE validation */
 static bool is_valid_ie_attr(const struct nlattr *attr)
 {
@@ -429,6 +452,9 @@
 		sizeof(u32) * dev->wiphy.n_cipher_suites,
 		dev->wiphy.cipher_suites);
 
+	NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_PMKIDS,
+		   dev->wiphy.max_num_pmkids);
+
 	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
 	if (!nl_modes)
 		goto nla_put_failure;
@@ -540,7 +566,10 @@
 	CMD(deauth, DEAUTHENTICATE);
 	CMD(disassoc, DISASSOCIATE);
 	CMD(join_ibss, JOIN_IBSS);
-	if (dev->wiphy.netnsok) {
+	CMD(set_pmksa, SET_PMKSA);
+	CMD(del_pmksa, DEL_PMKSA);
+	CMD(flush_pmksa, FLUSH_PMKSA);
+	if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
 		i++;
 		NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
 	}
@@ -947,6 +976,32 @@
 	return 0;
 }
 
+static int nl80211_valid_4addr(struct cfg80211_registered_device *rdev,
+			       struct net_device *netdev, u8 use_4addr,
+			       enum nl80211_iftype iftype)
+{
+	if (!use_4addr) {
+		if (netdev && netdev->br_port)
+			return -EBUSY;
+		return 0;
+	}
+
+	switch (iftype) {
+	case NL80211_IFTYPE_AP_VLAN:
+		if (rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP)
+			return 0;
+		break;
+	case NL80211_IFTYPE_STATION:
+		if (rdev->wiphy.flags & WIPHY_FLAG_4ADDR_STATION)
+			return 0;
+		break;
+	default:
+		break;
+	}
+
+	return -EOPNOTSUPP;
+}
+
 static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev;
@@ -987,6 +1042,16 @@
 		change = true;
 	}
 
+	if (info->attrs[NL80211_ATTR_4ADDR]) {
+		params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]);
+		change = true;
+		err = nl80211_valid_4addr(rdev, dev, params.use_4addr, ntype);
+		if (err)
+			goto unlock;
+	} else {
+		params.use_4addr = -1;
+	}
+
 	if (info->attrs[NL80211_ATTR_MNTR_FLAGS]) {
 		if (ntype != NL80211_IFTYPE_MONITOR) {
 			err = -EINVAL;
@@ -1006,6 +1071,9 @@
 	else
 		err = 0;
 
+	if (!err && params.use_4addr != -1)
+		dev->ieee80211_ptr->use_4addr = params.use_4addr;
+
  unlock:
 	dev_put(dev);
 	cfg80211_unlock_rdev(rdev);
@@ -1053,6 +1121,13 @@
 		params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
 	}
 
+	if (info->attrs[NL80211_ATTR_4ADDR]) {
+		params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]);
+		err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type);
+		if (err)
+			goto unlock;
+	}
+
 	err = parse_monitor_flags(type == NL80211_IFTYPE_MONITOR ?
 				  info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
 				  &flags);
@@ -1264,7 +1339,7 @@
 	if (!err)
 		err = func(&rdev->wiphy, dev, key.idx);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!err) {
 		if (func == rdev->ops->set_default_key)
 			dev->ieee80211_ptr->wext.default_key = key.idx;
@@ -1365,7 +1440,7 @@
 	if (!err)
 		err = rdev->ops->del_key(&rdev->wiphy, dev, key.idx, mac_addr);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!err) {
 		if (key.idx == dev->ieee80211_ptr->wext.default_key)
 			dev->ieee80211_ptr->wext.default_key = -1;
@@ -1682,20 +1757,10 @@
 	int sta_idx = cb->args[1];
 	int err;
 
-	if (!ifidx) {
-		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
-				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
-				  nl80211_policy);
-		if (err)
-			return err;
-
-		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
-			return -EINVAL;
-
-		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
-		if (!ifidx)
-			return -EINVAL;
-	}
+	if (!ifidx)
+		ifidx = nl80211_get_ifidx(cb);
+	if (ifidx < 0)
+		return ifidx;
 
 	rtnl_lock();
 
@@ -1800,7 +1865,7 @@
 }
 
 /*
- * Get vlan interface making sure it is on the right wiphy.
+ * Get vlan interface making sure it is running and on the right wiphy.
  */
 static int get_vlan(struct genl_info *info,
 		    struct cfg80211_registered_device *rdev,
@@ -1818,6 +1883,8 @@
 			return -EINVAL;
 		if ((*vlan)->ieee80211_ptr->wiphy != &rdev->wiphy)
 			return -EINVAL;
+		if (!netif_running(*vlan))
+			return -ENETDOWN;
 	}
 	return 0;
 }
@@ -2105,9 +2172,9 @@
 	if (pinfo->filled & MPATH_INFO_FRAME_QLEN)
 		NLA_PUT_U32(msg, NL80211_MPATH_INFO_FRAME_QLEN,
 			    pinfo->frame_qlen);
-	if (pinfo->filled & MPATH_INFO_DSN)
-		NLA_PUT_U32(msg, NL80211_MPATH_INFO_DSN,
-			    pinfo->dsn);
+	if (pinfo->filled & MPATH_INFO_SN)
+		NLA_PUT_U32(msg, NL80211_MPATH_INFO_SN,
+			    pinfo->sn);
 	if (pinfo->filled & MPATH_INFO_METRIC)
 		NLA_PUT_U32(msg, NL80211_MPATH_INFO_METRIC,
 			    pinfo->metric);
@@ -2145,20 +2212,10 @@
 	int path_idx = cb->args[1];
 	int err;
 
-	if (!ifidx) {
-		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
-				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
-				  nl80211_policy);
-		if (err)
-			return err;
-
-		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
-			return -EINVAL;
-
-		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
-		if (!ifidx)
-			return -EINVAL;
-	}
+	if (!ifidx)
+		ifidx = nl80211_get_ifidx(cb);
+	if (ifidx < 0)
+		return ifidx;
 
 	rtnl_lock();
 
@@ -2605,6 +2662,8 @@
 			cur_params.dot11MeshHWMPpreqMinInterval);
 	NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
 			cur_params.dot11MeshHWMPnetDiameterTraversalTime);
+	NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_ROOTMODE,
+			cur_params.dot11MeshHWMPRootMode);
 	nla_nest_end(msg, pinfoattr);
 	genlmsg_end(msg, hdr);
 	err = genlmsg_reply(msg, info);
@@ -2715,6 +2774,10 @@
 			dot11MeshHWMPnetDiameterTraversalTime,
 			mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
 			nla_get_u16);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
+			dot11MeshHWMPRootMode, mask,
+			NL80211_MESHCONF_HWMP_ROOTMODE,
+			nla_get_u8);
 
 	/* Apply changes */
 	err = rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask);
@@ -2988,7 +3051,6 @@
 		goto out;
 	}
 
-	request->n_channels = n_channels;
 	if (n_ssids)
 		request->ssids = (void *)&request->channels[n_channels];
 	request->n_ssids = n_ssids;
@@ -2999,32 +3061,53 @@
 			request->ie = (void *)(request->channels + n_channels);
 	}
 
+	i = 0;
 	if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
 		/* user specified, bail out if channel not found */
-		request->n_channels = n_channels;
-		i = 0;
 		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp) {
-			request->channels[i] = ieee80211_get_channel(wiphy, nla_get_u32(attr));
-			if (!request->channels[i]) {
+			struct ieee80211_channel *chan;
+
+			chan = ieee80211_get_channel(wiphy, nla_get_u32(attr));
+
+			if (!chan) {
 				err = -EINVAL;
 				goto out_free;
 			}
+
+			/* ignore disabled channels */
+			if (chan->flags & IEEE80211_CHAN_DISABLED)
+				continue;
+
+			request->channels[i] = chan;
 			i++;
 		}
 	} else {
 		/* all channels */
-		i = 0;
 		for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 			int j;
 			if (!wiphy->bands[band])
 				continue;
 			for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
-				request->channels[i] = &wiphy->bands[band]->channels[j];
+				struct ieee80211_channel *chan;
+
+				chan = &wiphy->bands[band]->channels[j];
+
+				if (chan->flags & IEEE80211_CHAN_DISABLED)
+					continue;
+
+				request->channels[i] = chan;
 				i++;
 			}
 		}
 	}
 
+	if (!i) {
+		err = -EINVAL;
+		goto out_free;
+	}
+
+	request->n_channels = i;
+
 	i = 0;
 	if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
 		nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
@@ -3105,6 +3188,8 @@
 		NLA_PUT_U16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval);
 	NLA_PUT_U16(msg, NL80211_BSS_CAPABILITY, res->capability);
 	NLA_PUT_U32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq);
+	NLA_PUT_U32(msg, NL80211_BSS_SEEN_MS_AGO,
+		jiffies_to_msecs(jiffies - intbss->ts));
 
 	switch (rdev->wiphy.signal_type) {
 	case CFG80211_SIGNAL_TYPE_MBM:
@@ -3159,21 +3244,11 @@
 	int start = cb->args[1], idx = 0;
 	int err;
 
-	if (!ifidx) {
-		err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
-				  nl80211_fam.attrbuf, nl80211_fam.maxattr,
-				  nl80211_policy);
-		if (err)
-			return err;
-
-		if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
-			return -EINVAL;
-
-		ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
-		if (!ifidx)
-			return -EINVAL;
-		cb->args[0] = ifidx;
-	}
+	if (!ifidx)
+		ifidx = nl80211_get_ifidx(cb);
+	if (ifidx < 0)
+		return ifidx;
+	cb->args[0] = ifidx;
 
 	dev = dev_get_by_index(sock_net(skb->sk), ifidx);
 	if (!dev)
@@ -3216,6 +3291,106 @@
 	return err;
 }
 
+static int nl80211_send_survey(struct sk_buff *msg, u32 pid, u32 seq,
+				int flags, struct net_device *dev,
+				struct survey_info *survey)
+{
+	void *hdr;
+	struct nlattr *infoattr;
+
+	/* Survey without a channel doesn't make sense */
+	if (!survey->channel)
+		return -EINVAL;
+
+	hdr = nl80211hdr_put(msg, pid, seq, flags,
+			     NL80211_CMD_NEW_SURVEY_RESULTS);
+	if (!hdr)
+		return -ENOMEM;
+
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
+
+	infoattr = nla_nest_start(msg, NL80211_ATTR_SURVEY_INFO);
+	if (!infoattr)
+		goto nla_put_failure;
+
+	NLA_PUT_U32(msg, NL80211_SURVEY_INFO_FREQUENCY,
+		    survey->channel->center_freq);
+	if (survey->filled & SURVEY_INFO_NOISE_DBM)
+		NLA_PUT_U8(msg, NL80211_SURVEY_INFO_NOISE,
+			    survey->noise);
+
+	nla_nest_end(msg, infoattr);
+
+	return genlmsg_end(msg, hdr);
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	return -EMSGSIZE;
+}
+
+static int nl80211_dump_survey(struct sk_buff *skb,
+			struct netlink_callback *cb)
+{
+	struct survey_info survey;
+	struct cfg80211_registered_device *dev;
+	struct net_device *netdev;
+	int ifidx = cb->args[0];
+	int survey_idx = cb->args[1];
+	int res;
+
+	if (!ifidx)
+		ifidx = nl80211_get_ifidx(cb);
+	if (ifidx < 0)
+		return ifidx;
+	cb->args[0] = ifidx;
+
+	rtnl_lock();
+
+	netdev = __dev_get_by_index(sock_net(skb->sk), ifidx);
+	if (!netdev) {
+		res = -ENODEV;
+		goto out_rtnl;
+	}
+
+	dev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
+	if (IS_ERR(dev)) {
+		res = PTR_ERR(dev);
+		goto out_rtnl;
+	}
+
+	if (!dev->ops->dump_survey) {
+		res = -EOPNOTSUPP;
+		goto out_err;
+	}
+
+	while (1) {
+		res = dev->ops->dump_survey(&dev->wiphy, netdev, survey_idx,
+					    &survey);
+		if (res == -ENOENT)
+			break;
+		if (res)
+			goto out_err;
+
+		if (nl80211_send_survey(skb,
+				NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, NLM_F_MULTI,
+				netdev,
+				&survey) < 0)
+			goto out;
+		survey_idx++;
+	}
+
+ out:
+	cb->args[1] = survey_idx;
+	res = skb->len;
+ out_err:
+	cfg80211_unlock_rdev(dev);
+ out_rtnl:
+	rtnl_unlock();
+
+	return res;
+}
+
 static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type)
 {
 	return auth_type <= NL80211_AUTHTYPE_MAX;
@@ -4054,6 +4229,99 @@
 	return err;
 }
 
+static int nl80211_setdel_pmksa(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev;
+	int (*rdev_ops)(struct wiphy *wiphy, struct net_device *dev,
+			struct cfg80211_pmksa *pmksa) = NULL;
+	int err;
+	struct net_device *dev;
+	struct cfg80211_pmksa pmksa;
+
+	memset(&pmksa, 0, sizeof(struct cfg80211_pmksa));
+
+	if (!info->attrs[NL80211_ATTR_MAC])
+		return -EINVAL;
+
+	if (!info->attrs[NL80211_ATTR_PMKID])
+		return -EINVAL;
+
+	rtnl_lock();
+
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+	if (err)
+		goto out_rtnl;
+
+	pmksa.pmkid = nla_data(info->attrs[NL80211_ATTR_PMKID]);
+	pmksa.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	switch (info->genlhdr->cmd) {
+	case NL80211_CMD_SET_PMKSA:
+		rdev_ops = rdev->ops->set_pmksa;
+		break;
+	case NL80211_CMD_DEL_PMKSA:
+		rdev_ops = rdev->ops->del_pmksa;
+		break;
+	default:
+		WARN_ON(1);
+		break;
+	}
+
+	if (!rdev_ops) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	err = rdev_ops(&rdev->wiphy, dev, &pmksa);
+
+ out:
+	cfg80211_unlock_rdev(rdev);
+	dev_put(dev);
+ out_rtnl:
+	rtnl_unlock();
+
+	return err;
+}
+
+static int nl80211_flush_pmksa(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev;
+	int err;
+	struct net_device *dev;
+
+	rtnl_lock();
+
+	err = get_rdev_dev_by_info_ifindex(info, &rdev, &dev);
+	if (err)
+		goto out_rtnl;
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (!rdev->ops->flush_pmksa) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	err = rdev->ops->flush_pmksa(&rdev->wiphy, dev);
+
+ out:
+	cfg80211_unlock_rdev(rdev);
+	dev_put(dev);
+ out_rtnl:
+	rtnl_unlock();
+
+	return err;
+
+}
+
 static struct genl_ops nl80211_ops[] = {
 	{
 		.cmd = NL80211_CMD_GET_WIPHY,
@@ -4293,6 +4561,30 @@
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
 	},
+	{
+		.cmd = NL80211_CMD_GET_SURVEY,
+		.policy = nl80211_policy,
+		.dumpit = nl80211_dump_survey,
+	},
+	{
+		.cmd = NL80211_CMD_SET_PMKSA,
+		.doit = nl80211_setdel_pmksa,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
+	{
+		.cmd = NL80211_CMD_DEL_PMKSA,
+		.doit = nl80211_setdel_pmksa,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
+	{
+		.cmd = NL80211_CMD_FLUSH_PMKSA,
+		.doit = nl80211_flush_pmksa,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+	},
+
 };
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
 	.name = "mlme",
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index f256dff..c01470e 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -1008,7 +1008,7 @@
 
 	if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
 	    request_wiphy && request_wiphy == wiphy &&
-	    request_wiphy->strict_regulatory) {
+	    request_wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) {
 		/*
 		 * This gaurantees the driver's requested regulatory domain
 		 * will always be used as a base for further regulatory
@@ -1051,13 +1051,13 @@
 	if (!last_request)
 		return true;
 	if (initiator == NL80211_REGDOM_SET_BY_CORE &&
-		  wiphy->custom_regulatory)
+	    wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY)
 		return true;
 	/*
 	 * wiphy->regd will be set once the device has its own
 	 * desired regulatory domain set
 	 */
-	if (wiphy->strict_regulatory && !wiphy->regd &&
+	if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY && !wiphy->regd &&
 	    !is_world_regdom(last_request->alpha2))
 		return true;
 	return false;
@@ -1093,7 +1093,7 @@
 
 	chan->beacon_found = true;
 
-	if (wiphy->disable_beacon_hints)
+	if (wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS)
 		return;
 
 	chan_before.center_freq = chan->center_freq;
@@ -1164,7 +1164,7 @@
 		return true;
 	if (last_request &&
 	    last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
-	    wiphy->custom_regulatory)
+	    wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY)
 		return true;
 	return false;
 }
@@ -1591,7 +1591,8 @@
 
 	r = __regulatory_hint(wiphy, reg_request);
 	/* This is required so that the orig_* parameters are saved */
-	if (r == -EALREADY && wiphy && wiphy->strict_regulatory)
+	if (r == -EALREADY && wiphy &&
+	    wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
 		wiphy_update_regulatory(wiphy, reg_request->initiator);
 out:
 	mutex_unlock(&reg_mutex);
@@ -1930,7 +1931,7 @@
 	const struct ieee80211_freq_range *freq_range = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
 
-	printk(KERN_INFO "\t(start_freq - end_freq @ bandwidth), "
+	printk(KERN_INFO "    (start_freq - end_freq @ bandwidth), "
 		"(max_antenna_gain, max_eirp)\n");
 
 	for (i = 0; i < rd->n_reg_rules; i++) {
@@ -1943,7 +1944,7 @@
 		 * in certain regions
 		 */
 		if (power_rule->max_antenna_gain)
-			printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
+			printk(KERN_INFO "    (%d KHz - %d KHz @ %d KHz), "
 				"(%d mBi, %d mBm)\n",
 				freq_range->start_freq_khz,
 				freq_range->end_freq_khz,
@@ -1951,7 +1952,7 @@
 				power_rule->max_antenna_gain,
 				power_rule->max_eirp);
 		else
-			printk(KERN_INFO "\t(%d KHz - %d KHz @ %d KHz), "
+			printk(KERN_INFO "    (%d KHz - %d KHz @ %d KHz), "
 				"(N/A, %d mBm)\n",
 				freq_range->start_freq_khz,
 				freq_range->end_freq_khz,
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e5f92ee..12dfa62 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -22,7 +22,7 @@
 {
 	struct cfg80211_scan_request *request;
 	struct net_device *dev;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -47,7 +47,7 @@
 	else
 		nl80211_send_scan_done(rdev, dev);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!request->aborted) {
 		memset(&wrqu, 0, sizeof(wrqu));
 
@@ -88,7 +88,7 @@
 	WARN_ON(request != wiphy_to_dev(request->wiphy)->scan_req);
 
 	request->aborted = aborted;
-	schedule_work(&wiphy_to_dev(request->wiphy)->scan_done_wk);
+	queue_work(cfg80211_wq, &wiphy_to_dev(request->wiphy)->scan_done_wk);
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
 
@@ -217,7 +217,7 @@
 		     a->len_information_elements);
 	if (!ie)
 		return false;
-	if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
+	if (ie[1] != sizeof(struct ieee80211_meshconf_ie))
 		return false;
 
 	/*
@@ -225,7 +225,8 @@
 	 * comparing since that may differ between stations taking
 	 * part in the same mesh.
 	 */
-	return memcmp(ie + 2, meshcfg, IEEE80211_MESH_CONFIG_LEN - 2) == 0;
+	return memcmp(ie + 2, meshcfg,
+	    sizeof(struct ieee80211_meshconf_ie) - 2) == 0;
 }
 
 static int cmp_bss(struct cfg80211_bss *a,
@@ -399,7 +400,7 @@
 				  res->pub.information_elements,
 				  res->pub.len_information_elements);
 		if (!meshid || !meshcfg ||
-		    meshcfg[1] != IEEE80211_MESH_CONFIG_LEN) {
+		    meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
 			/* bogus mesh */
 			kref_put(&res->ref, bss_release);
 			return NULL;
@@ -592,7 +593,7 @@
 }
 EXPORT_SYMBOL(cfg80211_unlink_bss);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 int cfg80211_wext_siwscan(struct net_device *dev,
 			  struct iw_request_info *info,
 			  union iwreq_data *wrqu, char *extra)
@@ -650,9 +651,15 @@
 	i = 0;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		int j;
+
 		if (!wiphy->bands[band])
 			continue;
+
 		for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
+			/* ignore disabled channels */
+			if (wiphy->bands[band]->channels[j].flags &
+						IEEE80211_CHAN_DISABLED)
+				continue;
 
 			/* If we have a wireless request structure and the
 			 * wireless request specifies frequencies, then search
@@ -859,7 +866,7 @@
 			break;
 		case WLAN_EID_MESH_CONFIG:
 			ismesh = true;
-			if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
+			if (ie[1] != sizeof(struct ieee80211_meshconf_ie))
 				break;
 			buf = kmalloc(50, GFP_ATOMIC);
 			if (!buf)
@@ -867,35 +874,40 @@
 			cfg = ie + 2;
 			memset(&iwe, 0, sizeof(iwe));
 			iwe.cmd = IWEVCUSTOM;
-			sprintf(buf, "Mesh network (version %d)", cfg[0]);
+			sprintf(buf, "Mesh Network Path Selection Protocol ID: "
+				"0x%02X", cfg[0]);
 			iwe.u.data.length = strlen(buf);
 			current_ev = iwe_stream_add_point(info, current_ev,
 							  end_buf,
 							  &iwe, buf);
-			sprintf(buf, "Path Selection Protocol ID: "
-				"0x%02X%02X%02X%02X", cfg[1], cfg[2], cfg[3],
-							cfg[4]);
+			sprintf(buf, "Path Selection Metric ID: 0x%02X",
+				cfg[1]);
 			iwe.u.data.length = strlen(buf);
 			current_ev = iwe_stream_add_point(info, current_ev,
 							  end_buf,
 							  &iwe, buf);
-			sprintf(buf, "Path Selection Metric ID: "
-				"0x%02X%02X%02X%02X", cfg[5], cfg[6], cfg[7],
-							cfg[8]);
+			sprintf(buf, "Congestion Control Mode ID: 0x%02X",
+				cfg[2]);
 			iwe.u.data.length = strlen(buf);
 			current_ev = iwe_stream_add_point(info, current_ev,
 							  end_buf,
 							  &iwe, buf);
-			sprintf(buf, "Congestion Control Mode ID: "
-				"0x%02X%02X%02X%02X", cfg[9], cfg[10],
-							cfg[11], cfg[12]);
+			sprintf(buf, "Synchronization ID: 0x%02X", cfg[3]);
 			iwe.u.data.length = strlen(buf);
 			current_ev = iwe_stream_add_point(info, current_ev,
 							  end_buf,
 							  &iwe, buf);
-			sprintf(buf, "Channel Precedence: "
-				"0x%02X%02X%02X%02X", cfg[13], cfg[14],
-							cfg[15], cfg[16]);
+			sprintf(buf, "Authentication ID: 0x%02X", cfg[4]);
+			iwe.u.data.length = strlen(buf);
+			current_ev = iwe_stream_add_point(info, current_ev,
+							  end_buf,
+							  &iwe, buf);
+			sprintf(buf, "Formation Info: 0x%02X", cfg[5]);
+			iwe.u.data.length = strlen(buf);
+			current_ev = iwe_stream_add_point(info, current_ev,
+							  end_buf,
+							  &iwe, buf);
+			sprintf(buf, "Capabilities: 0x%02X", cfg[6]);
 			iwe.u.data.length = strlen(buf);
 			current_ev = iwe_stream_add_point(info, current_ev,
 							  end_buf,
@@ -925,8 +937,8 @@
 		ie += ie[1] + 2;
 	}
 
-	if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)
-	    || ismesh) {
+	if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) ||
+	    ismesh) {
 		memset(&iwe, 0, sizeof(iwe));
 		iwe.cmd = SIOCGIWMODE;
 		if (ismesh)
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 9f0b280..2333d78 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -365,7 +365,7 @@
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	u8 *country_ie;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -382,7 +382,7 @@
 				    resp_ie, resp_ie_len,
 				    status, GFP_KERNEL);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (wextev) {
 		if (req_ie && status == WLAN_STATUS_SUCCESS) {
 			memset(&wrqu, 0, sizeof(wrqu));
@@ -488,7 +488,7 @@
 	spin_lock_irqsave(&wdev->event_lock, flags);
 	list_add_tail(&ev->list, &wdev->event_list);
 	spin_unlock_irqrestore(&wdev->event_lock, flags);
-	schedule_work(&rdev->event_work);
+	queue_work(cfg80211_wq, &rdev->event_work);
 }
 EXPORT_SYMBOL(cfg80211_connect_result);
 
@@ -497,7 +497,7 @@
 		       const u8 *resp_ie, size_t resp_ie_len)
 {
 	struct cfg80211_bss *bss;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -532,7 +532,7 @@
 			    req_ie, req_ie_len, resp_ie, resp_ie_len,
 			    GFP_KERNEL);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (req_ie) {
 		memset(&wrqu, 0, sizeof(wrqu));
 		wrqu.data.length = req_ie_len;
@@ -583,7 +583,7 @@
 	spin_lock_irqsave(&wdev->event_lock, flags);
 	list_add_tail(&ev->list, &wdev->event_list);
 	spin_unlock_irqrestore(&wdev->event_lock, flags);
-	schedule_work(&rdev->event_work);
+	queue_work(cfg80211_wq, &rdev->event_work);
 }
 EXPORT_SYMBOL(cfg80211_roamed);
 
@@ -593,7 +593,7 @@
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
 	int i;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -651,7 +651,7 @@
 		for (i = 0; i < 6; i++)
 			rdev->ops->del_key(wdev->wiphy, dev, i, NULL);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	memset(&wrqu, 0, sizeof(wrqu));
 	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
@@ -681,7 +681,7 @@
 	spin_lock_irqsave(&wdev->event_lock, flags);
 	list_add_tail(&ev->list, &wdev->event_list);
 	spin_unlock_irqrestore(&wdev->event_lock, flags);
-	schedule_work(&rdev->event_work);
+	queue_work(cfg80211_wq, &rdev->event_work);
 }
 EXPORT_SYMBOL(cfg80211_disconnected);
 
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 3fc2df8..59361fd 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -320,7 +320,9 @@
 		break;
 	case cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS):
 		if (unlikely(iftype != NL80211_IFTYPE_WDS &&
-			     iftype != NL80211_IFTYPE_MESH_POINT))
+			     iftype != NL80211_IFTYPE_MESH_POINT &&
+			     iftype != NL80211_IFTYPE_AP_VLAN &&
+			     iftype != NL80211_IFTYPE_STATION))
 			return -1;
 		if (iftype == NL80211_IFTYPE_MESH_POINT) {
 			struct ieee80211s_hdr *meshdr =
@@ -656,7 +658,14 @@
 	    !(rdev->wiphy.interface_modes & (1 << ntype)))
 		return -EOPNOTSUPP;
 
+	/* if it's part of a bridge, reject changing type to station/ibss */
+	if (dev->br_port && (ntype == NL80211_IFTYPE_ADHOC ||
+			     ntype == NL80211_IFTYPE_STATION))
+		return -EBUSY;
+
 	if (ntype != otype) {
+		dev->ieee80211_ptr->use_4addr = false;
+
 		switch (otype) {
 		case NL80211_IFTYPE_ADHOC:
 			cfg80211_leave_ibss(rdev, dev, false);
@@ -680,5 +689,34 @@
 
 	WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype);
 
+	if (!err && params && params->use_4addr != -1)
+		dev->ieee80211_ptr->use_4addr = params->use_4addr;
+
+	if (!err) {
+		dev->priv_flags &= ~IFF_DONT_BRIDGE;
+		switch (ntype) {
+		case NL80211_IFTYPE_STATION:
+			if (dev->ieee80211_ptr->use_4addr)
+				break;
+			/* fall through */
+		case NL80211_IFTYPE_ADHOC:
+			dev->priv_flags |= IFF_DONT_BRIDGE;
+			break;
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_AP_VLAN:
+		case NL80211_IFTYPE_WDS:
+		case NL80211_IFTYPE_MESH_POINT:
+			/* bridging OK */
+			break;
+		case NL80211_IFTYPE_MONITOR:
+			/* monitor can't bridge anyway */
+			break;
+		case NL80211_IFTYPE_UNSPECIFIED:
+		case __NL80211_IFTYPE_AFTER_LAST:
+			/* not happening */
+			break;
+		}
+	}
+
 	return err;
 }
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 561a45c..584eb48 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -437,6 +437,7 @@
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	int err, i;
+	bool rejoin = false;
 
 	if (!wdev->wext.keys) {
 		wdev->wext.keys = kzalloc(sizeof(*wdev->wext.keys),
@@ -466,8 +467,24 @@
 
 	if (remove) {
 		err = 0;
-		if (wdev->current_bss)
+		if (wdev->current_bss) {
+			/*
+			 * If removing the current TX key, we will need to
+			 * join a new IBSS without the privacy bit clear.
+			 */
+			if (idx == wdev->wext.default_key &&
+			    wdev->iftype == NL80211_IFTYPE_ADHOC) {
+				__cfg80211_leave_ibss(rdev, wdev->netdev, true);
+				rejoin = true;
+			}
 			err = rdev->ops->del_key(&rdev->wiphy, dev, idx, addr);
+		}
+		/*
+		 * Applications using wireless extensions expect to be
+		 * able to delete keys that don't exist, so allow that.
+		 */
+		if (err == -ENOENT)
+			err = 0;
 		if (!err) {
 			if (!addr) {
 				wdev->wext.keys->params[idx].key_len = 0;
@@ -478,12 +495,9 @@
 			else if (idx == wdev->wext.default_mgmt_key)
 				wdev->wext.default_mgmt_key = -1;
 		}
-		/*
-		 * Applications using wireless extensions expect to be
-		 * able to delete keys that don't exist, so allow that.
-		 */
-		if (err == -ENOENT)
-			return 0;
+
+		if (!err && rejoin)
+			err = cfg80211_ibss_wext_join(rdev, wdev);
 
 		return err;
 	}
@@ -511,11 +525,25 @@
 	if ((params->cipher == WLAN_CIPHER_SUITE_WEP40 ||
 	     params->cipher == WLAN_CIPHER_SUITE_WEP104) &&
 	    (tx_key || (!addr && wdev->wext.default_key == -1))) {
-		if (wdev->current_bss)
+		if (wdev->current_bss) {
+			/*
+			 * If we are getting a new TX key from not having
+			 * had one before we need to join a new IBSS with
+			 * the privacy bit set.
+			 */
+			if (wdev->iftype == NL80211_IFTYPE_ADHOC &&
+			    wdev->wext.default_key == -1) {
+				__cfg80211_leave_ibss(rdev, wdev->netdev, true);
+				rejoin = true;
+			}
 			err = rdev->ops->set_default_key(&rdev->wiphy,
 							 dev, idx);
-		if (!err)
+		}
+		if (!err) {
 			wdev->wext.default_key = idx;
+			if (rejoin)
+				err = cfg80211_ibss_wext_join(rdev, wdev);
+		}
 		return err;
 	}
 
@@ -539,10 +567,13 @@
 {
 	int err;
 
+	/* devlist mutex needed for possible IBSS re-join */
+	mutex_lock(&rdev->devlist_mtx);
 	wdev_lock(dev->ieee80211_ptr);
 	err = __cfg80211_set_encryption(rdev, dev, addr, remove,
 					tx_key, idx, params);
 	wdev_unlock(dev->ieee80211_ptr);
+	mutex_unlock(&rdev->devlist_mtx);
 
 	return err;
 }
@@ -904,8 +935,6 @@
 
 static int cfg80211_set_wpa_version(struct wireless_dev *wdev, u32 wpa_versions)
 {
-	wdev->wext.connect.crypto.wpa_versions = 0;
-
 	if (wpa_versions & ~(IW_AUTH_WPA_VERSION_WPA |
 			     IW_AUTH_WPA_VERSION_WPA2|
 		             IW_AUTH_WPA_VERSION_DISABLED))
@@ -933,8 +962,6 @@
 
 static int cfg80211_set_cipher_group(struct wireless_dev *wdev, u32 cipher)
 {
-	wdev->wext.connect.crypto.cipher_group = 0;
-
 	if (cipher & IW_AUTH_CIPHER_WEP40)
 		wdev->wext.connect.crypto.cipher_group =
 			WLAN_CIPHER_SUITE_WEP40;
@@ -950,6 +977,8 @@
 	else if (cipher & IW_AUTH_CIPHER_AES_CMAC)
 		wdev->wext.connect.crypto.cipher_group =
 			WLAN_CIPHER_SUITE_AES_CMAC;
+	else if (cipher & IW_AUTH_CIPHER_NONE)
+		wdev->wext.connect.crypto.cipher_group = 0;
 	else
 		return -EINVAL;
 
@@ -1372,6 +1401,47 @@
 }
 EXPORT_SYMBOL_GPL(cfg80211_wext_giwessid);
 
+int cfg80211_wext_siwpmksa(struct net_device *dev,
+			   struct iw_request_info *info,
+			   struct iw_point *data, char *extra)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
+	struct cfg80211_pmksa cfg_pmksa;
+	struct iw_pmksa *pmksa = (struct iw_pmksa *)extra;
+
+	memset(&cfg_pmksa, 0, sizeof(struct cfg80211_pmksa));
+
+	if (wdev->iftype != NL80211_IFTYPE_STATION)
+		return -EINVAL;
+
+	cfg_pmksa.bssid = pmksa->bssid.sa_data;
+	cfg_pmksa.pmkid = pmksa->pmkid;
+
+	switch (pmksa->cmd) {
+	case IW_PMKSA_ADD:
+		if (!rdev->ops->set_pmksa)
+			return -EOPNOTSUPP;
+
+		return rdev->ops->set_pmksa(&rdev->wiphy, dev, &cfg_pmksa);
+
+	case IW_PMKSA_REMOVE:
+		if (!rdev->ops->del_pmksa)
+			return -EOPNOTSUPP;
+
+		return rdev->ops->del_pmksa(&rdev->wiphy, dev, &cfg_pmksa);
+
+	case IW_PMKSA_FLUSH:
+		if (!rdev->ops->flush_pmksa)
+			return -EOPNOTSUPP;
+
+		return rdev->ops->flush_pmksa(&rdev->wiphy, dev);
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const iw_handler cfg80211_handlers[] = {
 	[IW_IOCTL_IDX(SIOCGIWNAME)]	= (iw_handler) cfg80211_wext_giwname,
 	[IW_IOCTL_IDX(SIOCSIWFREQ)]	= (iw_handler) cfg80211_wext_siwfreq,
@@ -1404,6 +1474,7 @@
 	[IW_IOCTL_IDX(SIOCSIWAUTH)]	= (iw_handler) cfg80211_wext_siwauth,
 	[IW_IOCTL_IDX(SIOCGIWAUTH)]	= (iw_handler) cfg80211_wext_giwauth,
 	[IW_IOCTL_IDX(SIOCSIWENCODEEXT)]= (iw_handler) cfg80211_wext_siwencodeext,
+	[IW_IOCTL_IDX(SIOCSIWPMKSA)]	= (iw_handler) cfg80211_wext_siwpmksa,
 };
 
 const struct iw_handler_def cfg80211_wext_handler = {
diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
new file mode 100644
index 0000000..5e1656b
--- /dev/null
+++ b/net/wireless/wext-core.c
@@ -0,0 +1,1065 @@
+/*
+ * This file implement the Wireless Extensions core API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ * Copyright	2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/wireless.h>
+#include <linux/uaccess.h>
+#include <net/cfg80211.h>
+#include <net/iw_handler.h>
+#include <net/netlink.h>
+#include <net/wext.h>
+#include <net/net_namespace.h>
+
+typedef int (*wext_ioctl_func)(struct net_device *, struct iwreq *,
+			       unsigned int, struct iw_request_info *,
+			       iw_handler);
+
+
+/*
+ * Meta-data about all the standard Wireless Extension request we
+ * know about.
+ */
+static const struct iw_ioctl_description standard_ioctl[] = {
+	[SIOCSIWCOMMIT	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWNAME	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_CHAR,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWNWID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWNWID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWFREQ	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_FREQ,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWFREQ	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_FREQ,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWMODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_UINT,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWMODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_UINT,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWSENS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWSENS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWRANGE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWRANGE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_range),
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWPRIV	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWPRIV	- SIOCIWFIRST] = { /* (handled directly by us) */
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct iw_priv_args),
+		.max_tokens	= 16,
+		.flags		= IW_DESCR_FLAG_NOMAX,
+	},
+	[SIOCSIWSTATS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWSTATS	- SIOCIWFIRST] = { /* (handled directly by us) */
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_statistics),
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct sockaddr),
+		.max_tokens	= IW_MAX_SPY,
+	},
+	[SIOCGIWSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct sockaddr) +
+				  sizeof(struct iw_quality),
+		.max_tokens	= IW_MAX_SPY,
+	},
+	[SIOCSIWTHRSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct iw_thrspy),
+		.min_tokens	= 1,
+		.max_tokens	= 1,
+	},
+	[SIOCGIWTHRSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct iw_thrspy),
+		.min_tokens	= 1,
+		.max_tokens	= 1,
+	},
+	[SIOCSIWAP	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[SIOCGIWAP	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWMLME	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_mlme),
+		.max_tokens	= sizeof(struct iw_mlme),
+	},
+	[SIOCGIWAPLIST	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct sockaddr) +
+				  sizeof(struct iw_quality),
+		.max_tokens	= IW_MAX_AP,
+		.flags		= IW_DESCR_FLAG_NOMAX,
+	},
+	[SIOCSIWSCAN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= 0,
+		.max_tokens	= sizeof(struct iw_scan_req),
+	},
+	[SIOCGIWSCAN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_SCAN_MAX_DATA,
+		.flags		= IW_DESCR_FLAG_NOMAX,
+	},
+	[SIOCSIWESSID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWESSID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWNICKN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+	},
+	[SIOCGIWNICKN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+	},
+	[SIOCSIWRATE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWRATE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWRTS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWRTS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWFRAG	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWFRAG	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWTXPOW	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWTXPOW	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWRETRY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWRETRY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWENCODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ENCODING_TOKEN_MAX,
+		.flags		= IW_DESCR_FLAG_EVENT | IW_DESCR_FLAG_RESTRICT,
+	},
+	[SIOCGIWENCODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ENCODING_TOKEN_MAX,
+		.flags		= IW_DESCR_FLAG_DUMP | IW_DESCR_FLAG_RESTRICT,
+	},
+	[SIOCSIWPOWER	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWPOWER	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWGENIE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[SIOCGIWGENIE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[SIOCSIWAUTH	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWAUTH	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWENCODEEXT - SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_encode_ext),
+		.max_tokens	= sizeof(struct iw_encode_ext) +
+				  IW_ENCODING_TOKEN_MAX,
+	},
+	[SIOCGIWENCODEEXT - SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_encode_ext),
+		.max_tokens	= sizeof(struct iw_encode_ext) +
+				  IW_ENCODING_TOKEN_MAX,
+	},
+	[SIOCSIWPMKSA - SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_pmksa),
+		.max_tokens	= sizeof(struct iw_pmksa),
+	},
+};
+static const unsigned standard_ioctl_num = ARRAY_SIZE(standard_ioctl);
+
+/*
+ * Meta-data about all the additional standard Wireless Extension events
+ * we know about.
+ */
+static const struct iw_ioctl_description standard_event[] = {
+	[IWEVTXDROP	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[IWEVQUAL	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_QUAL,
+	},
+	[IWEVCUSTOM	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_CUSTOM_MAX,
+	},
+	[IWEVREGISTERED	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[IWEVEXPIRED	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[IWEVGENIE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[IWEVMICHAELMICFAILURE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_michaelmicfailure),
+	},
+	[IWEVASSOCREQIE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[IWEVASSOCRESPIE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[IWEVPMKIDCAND	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_pmkid_cand),
+	},
+};
+static const unsigned standard_event_num = ARRAY_SIZE(standard_event);
+
+/* Size (in bytes) of various events */
+static const int event_type_size[] = {
+	IW_EV_LCP_LEN,			/* IW_HEADER_TYPE_NULL */
+	0,
+	IW_EV_CHAR_LEN,			/* IW_HEADER_TYPE_CHAR */
+	0,
+	IW_EV_UINT_LEN,			/* IW_HEADER_TYPE_UINT */
+	IW_EV_FREQ_LEN,			/* IW_HEADER_TYPE_FREQ */
+	IW_EV_ADDR_LEN,			/* IW_HEADER_TYPE_ADDR */
+	0,
+	IW_EV_POINT_LEN,		/* Without variable payload */
+	IW_EV_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
+	IW_EV_QUAL_LEN,			/* IW_HEADER_TYPE_QUAL */
+};
+
+#ifdef CONFIG_COMPAT
+static const int compat_event_type_size[] = {
+	IW_EV_COMPAT_LCP_LEN,		/* IW_HEADER_TYPE_NULL */
+	0,
+	IW_EV_COMPAT_CHAR_LEN,		/* IW_HEADER_TYPE_CHAR */
+	0,
+	IW_EV_COMPAT_UINT_LEN,		/* IW_HEADER_TYPE_UINT */
+	IW_EV_COMPAT_FREQ_LEN,		/* IW_HEADER_TYPE_FREQ */
+	IW_EV_COMPAT_ADDR_LEN,		/* IW_HEADER_TYPE_ADDR */
+	0,
+	IW_EV_COMPAT_POINT_LEN,		/* Without variable payload */
+	IW_EV_COMPAT_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
+	IW_EV_COMPAT_QUAL_LEN,		/* IW_HEADER_TYPE_QUAL */
+};
+#endif
+
+
+/* IW event code */
+
+static int __net_init wext_pernet_init(struct net *net)
+{
+	skb_queue_head_init(&net->wext_nlevents);
+	return 0;
+}
+
+static void __net_exit wext_pernet_exit(struct net *net)
+{
+	skb_queue_purge(&net->wext_nlevents);
+}
+
+static struct pernet_operations wext_pernet_ops = {
+	.init = wext_pernet_init,
+	.exit = wext_pernet_exit,
+};
+
+static int __init wireless_nlevent_init(void)
+{
+	return register_pernet_subsys(&wext_pernet_ops);
+}
+
+subsys_initcall(wireless_nlevent_init);
+
+/* Process events generated by the wireless layer or the driver. */
+static void wireless_nlevent_process(struct work_struct *work)
+{
+	struct sk_buff *skb;
+	struct net *net;
+
+	rtnl_lock();
+
+	for_each_net(net) {
+		while ((skb = skb_dequeue(&net->wext_nlevents)))
+			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
+				    GFP_KERNEL);
+	}
+
+	rtnl_unlock();
+}
+
+static DECLARE_WORK(wireless_nlevent_work, wireless_nlevent_process);
+
+static struct nlmsghdr *rtnetlink_ifinfo_prep(struct net_device *dev,
+					      struct sk_buff *skb)
+{
+	struct ifinfomsg *r;
+	struct nlmsghdr  *nlh;
+
+	nlh = nlmsg_put(skb, 0, 0, RTM_NEWLINK, sizeof(*r), 0);
+	if (!nlh)
+		return NULL;
+
+	r = nlmsg_data(nlh);
+	r->ifi_family = AF_UNSPEC;
+	r->__ifi_pad = 0;
+	r->ifi_type = dev->type;
+	r->ifi_index = dev->ifindex;
+	r->ifi_flags = dev_get_flags(dev);
+	r->ifi_change = 0;	/* Wireless changes don't affect those flags */
+
+	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
+
+	return nlh;
+ nla_put_failure:
+	nlmsg_cancel(skb, nlh);
+	return NULL;
+}
+
+
+/*
+ * Main event dispatcher. Called from other parts and drivers.
+ * Send the event on the appropriate channels.
+ * May be called from interrupt context.
+ */
+void wireless_send_event(struct net_device *	dev,
+			 unsigned int		cmd,
+			 union iwreq_data *	wrqu,
+			 const char *		extra)
+{
+	const struct iw_ioctl_description *	descr = NULL;
+	int extra_len = 0;
+	struct iw_event  *event;		/* Mallocated whole event */
+	int event_len;				/* Its size */
+	int hdr_len;				/* Size of the event header */
+	int wrqu_off = 0;			/* Offset in wrqu */
+	/* Don't "optimise" the following variable, it will crash */
+	unsigned	cmd_index;		/* *MUST* be unsigned */
+	struct sk_buff *skb;
+	struct nlmsghdr *nlh;
+	struct nlattr *nla;
+#ifdef CONFIG_COMPAT
+	struct __compat_iw_event *compat_event;
+	struct compat_iw_point compat_wrqu;
+	struct sk_buff *compskb;
+#endif
+
+	/*
+	 * Nothing in the kernel sends scan events with data, be safe.
+	 * This is necessary because we cannot fix up scan event data
+	 * for compat, due to being contained in 'extra', but normally
+	 * applications are required to retrieve the scan data anyway
+	 * and no data is included in the event, this codifies that
+	 * practice.
+	 */
+	if (WARN_ON(cmd == SIOCGIWSCAN && extra))
+		extra = NULL;
+
+	/* Get the description of the Event */
+	if (cmd <= SIOCIWLAST) {
+		cmd_index = cmd - SIOCIWFIRST;
+		if (cmd_index < standard_ioctl_num)
+			descr = &(standard_ioctl[cmd_index]);
+	} else {
+		cmd_index = cmd - IWEVFIRST;
+		if (cmd_index < standard_event_num)
+			descr = &(standard_event[cmd_index]);
+	}
+	/* Don't accept unknown events */
+	if (descr == NULL) {
+		/* Note : we don't return an error to the driver, because
+		 * the driver would not know what to do about it. It can't
+		 * return an error to the user, because the event is not
+		 * initiated by a user request.
+		 * The best the driver could do is to log an error message.
+		 * We will do it ourselves instead...
+		 */
+		printk(KERN_ERR "%s (WE) : Invalid/Unknown Wireless Event (0x%04X)\n",
+		       dev->name, cmd);
+		return;
+	}
+
+	/* Check extra parameters and set extra_len */
+	if (descr->header_type == IW_HEADER_TYPE_POINT) {
+		/* Check if number of token fits within bounds */
+		if (wrqu->data.length > descr->max_tokens) {
+			printk(KERN_ERR "%s (WE) : Wireless Event too big (%d)\n", dev->name, wrqu->data.length);
+			return;
+		}
+		if (wrqu->data.length < descr->min_tokens) {
+			printk(KERN_ERR "%s (WE) : Wireless Event too small (%d)\n", dev->name, wrqu->data.length);
+			return;
+		}
+		/* Calculate extra_len - extra is NULL for restricted events */
+		if (extra != NULL)
+			extra_len = wrqu->data.length * descr->token_size;
+		/* Always at an offset in wrqu */
+		wrqu_off = IW_EV_POINT_OFF;
+	}
+
+	/* Total length of the event */
+	hdr_len = event_type_size[descr->header_type];
+	event_len = hdr_len + extra_len;
+
+	/*
+	 * The problem for 64/32 bit.
+	 *
+	 * On 64-bit, a regular event is laid out as follows:
+	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
+	 *      | event.len | event.cmd |     p a d d i n g     |
+	 *      | wrqu data ... (with the correct size)         |
+	 *
+	 * This padding exists because we manipulate event->u,
+	 * and 'event' is not packed.
+	 *
+	 * An iw_point event is laid out like this instead:
+	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
+	 *      | event.len | event.cmd |     p a d d i n g     |
+	 *      | iwpnt.len | iwpnt.flg |     p a d d i n g     |
+	 *      | extra data  ...
+	 *
+	 * The second padding exists because struct iw_point is extended,
+	 * but this depends on the platform...
+	 *
+	 * On 32-bit, all the padding shouldn't be there.
+	 */
+
+	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!skb)
+		return;
+
+	/* Send via the RtNetlink event channel */
+	nlh = rtnetlink_ifinfo_prep(dev, skb);
+	if (WARN_ON(!nlh)) {
+		kfree_skb(skb);
+		return;
+	}
+
+	/* Add the wireless events in the netlink packet */
+	nla = nla_reserve(skb, IFLA_WIRELESS, event_len);
+	if (!nla) {
+		kfree_skb(skb);
+		return;
+	}
+	event = nla_data(nla);
+
+	/* Fill event - first clear to avoid data leaking */
+	memset(event, 0, hdr_len);
+	event->len = event_len;
+	event->cmd = cmd;
+	memcpy(&event->u, ((char *) wrqu) + wrqu_off, hdr_len - IW_EV_LCP_LEN);
+	if (extra_len)
+		memcpy(((char *) event) + hdr_len, extra, extra_len);
+
+	nlmsg_end(skb, nlh);
+#ifdef CONFIG_COMPAT
+	hdr_len = compat_event_type_size[descr->header_type];
+	event_len = hdr_len + extra_len;
+
+	compskb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!compskb) {
+		kfree_skb(skb);
+		return;
+	}
+
+	/* Send via the RtNetlink event channel */
+	nlh = rtnetlink_ifinfo_prep(dev, compskb);
+	if (WARN_ON(!nlh)) {
+		kfree_skb(skb);
+		kfree_skb(compskb);
+		return;
+	}
+
+	/* Add the wireless events in the netlink packet */
+	nla = nla_reserve(compskb, IFLA_WIRELESS, event_len);
+	if (!nla) {
+		kfree_skb(skb);
+		kfree_skb(compskb);
+		return;
+	}
+	compat_event = nla_data(nla);
+
+	compat_event->len = event_len;
+	compat_event->cmd = cmd;
+	if (descr->header_type == IW_HEADER_TYPE_POINT) {
+		compat_wrqu.length = wrqu->data.length;
+		compat_wrqu.flags = wrqu->data.flags;
+		memcpy(&compat_event->pointer,
+			((char *) &compat_wrqu) + IW_EV_COMPAT_POINT_OFF,
+			hdr_len - IW_EV_COMPAT_LCP_LEN);
+		if (extra_len)
+			memcpy(((char *) compat_event) + hdr_len,
+				extra, extra_len);
+	} else {
+		/* extra_len must be zero, so no if (extra) needed */
+		memcpy(&compat_event->pointer, wrqu,
+			hdr_len - IW_EV_COMPAT_LCP_LEN);
+	}
+
+	nlmsg_end(compskb, nlh);
+
+	skb_shinfo(skb)->frag_list = compskb;
+#endif
+	skb_queue_tail(&dev_net(dev)->wext_nlevents, skb);
+	schedule_work(&wireless_nlevent_work);
+}
+EXPORT_SYMBOL(wireless_send_event);
+
+
+
+/* IW handlers */
+
+struct iw_statistics *get_wireless_stats(struct net_device *dev)
+{
+#ifdef CONFIG_WIRELESS_EXT
+	if ((dev->wireless_handlers != NULL) &&
+	   (dev->wireless_handlers->get_wireless_stats != NULL))
+		return dev->wireless_handlers->get_wireless_stats(dev);
+#endif
+
+#ifdef CONFIG_CFG80211_WEXT
+	if (dev->ieee80211_ptr && dev->ieee80211_ptr &&
+	    dev->ieee80211_ptr->wiphy &&
+	    dev->ieee80211_ptr->wiphy->wext &&
+	    dev->ieee80211_ptr->wiphy->wext->get_wireless_stats)
+		return dev->ieee80211_ptr->wiphy->wext->get_wireless_stats(dev);
+#endif
+
+	/* not found */
+	return NULL;
+}
+
+static int iw_handler_get_iwstats(struct net_device *		dev,
+				  struct iw_request_info *	info,
+				  union iwreq_data *		wrqu,
+				  char *			extra)
+{
+	/* Get stats from the driver */
+	struct iw_statistics *stats;
+
+	stats = get_wireless_stats(dev);
+	if (stats) {
+		/* Copy statistics to extra */
+		memcpy(extra, stats, sizeof(struct iw_statistics));
+		wrqu->data.length = sizeof(struct iw_statistics);
+
+		/* Check if we need to clear the updated flag */
+		if (wrqu->data.flags != 0)
+			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
+		return 0;
+	} else
+		return -EOPNOTSUPP;
+}
+
+static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
+{
+	/* Don't "optimise" the following variable, it will crash */
+	unsigned int	index;		/* *MUST* be unsigned */
+	const struct iw_handler_def *handlers = NULL;
+
+#ifdef CONFIG_CFG80211_WEXT
+	if (dev->ieee80211_ptr && dev->ieee80211_ptr->wiphy)
+		handlers = dev->ieee80211_ptr->wiphy->wext;
+#endif
+#ifdef CONFIG_WIRELESS_EXT
+	if (dev->wireless_handlers)
+		handlers = dev->wireless_handlers;
+#endif
+
+	if (!handlers)
+		return NULL;
+
+	/* Try as a standard command */
+	index = cmd - SIOCIWFIRST;
+	if (index < handlers->num_standard)
+		return handlers->standard[index];
+
+#ifdef CONFIG_WEXT_PRIV
+	/* Try as a private command */
+	index = cmd - SIOCIWFIRSTPRIV;
+	if (index < handlers->num_private)
+		return handlers->private[index];
+#endif
+
+	/* Not found */
+	return NULL;
+}
+
+static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd,
+				   const struct iw_ioctl_description *descr,
+				   iw_handler handler, struct net_device *dev,
+				   struct iw_request_info *info)
+{
+	int err, extra_size, user_length = 0, essid_compat = 0;
+	char *extra;
+
+	/* Calculate space needed by arguments. Always allocate
+	 * for max space.
+	 */
+	extra_size = descr->max_tokens * descr->token_size;
+
+	/* Check need for ESSID compatibility for WE < 21 */
+	switch (cmd) {
+	case SIOCSIWESSID:
+	case SIOCGIWESSID:
+	case SIOCSIWNICKN:
+	case SIOCGIWNICKN:
+		if (iwp->length == descr->max_tokens + 1)
+			essid_compat = 1;
+		else if (IW_IS_SET(cmd) && (iwp->length != 0)) {
+			char essid[IW_ESSID_MAX_SIZE + 1];
+			unsigned int len;
+			len = iwp->length * descr->token_size;
+
+			if (len > IW_ESSID_MAX_SIZE)
+				return -EFAULT;
+
+			err = copy_from_user(essid, iwp->pointer, len);
+			if (err)
+				return -EFAULT;
+
+			if (essid[iwp->length - 1] == '\0')
+				essid_compat = 1;
+		}
+		break;
+	default:
+		break;
+	}
+
+	iwp->length -= essid_compat;
+
+	/* Check what user space is giving us */
+	if (IW_IS_SET(cmd)) {
+		/* Check NULL pointer */
+		if (!iwp->pointer && iwp->length != 0)
+			return -EFAULT;
+		/* Check if number of token fits within bounds */
+		if (iwp->length > descr->max_tokens)
+			return -E2BIG;
+		if (iwp->length < descr->min_tokens)
+			return -EINVAL;
+	} else {
+		/* Check NULL pointer */
+		if (!iwp->pointer)
+			return -EFAULT;
+		/* Save user space buffer size for checking */
+		user_length = iwp->length;
+
+		/* Don't check if user_length > max to allow forward
+		 * compatibility. The test user_length < min is
+		 * implied by the test at the end.
+		 */
+
+		/* Support for very large requests */
+		if ((descr->flags & IW_DESCR_FLAG_NOMAX) &&
+		    (user_length > descr->max_tokens)) {
+			/* Allow userspace to GET more than max so
+			 * we can support any size GET requests.
+			 * There is still a limit : -ENOMEM.
+			 */
+			extra_size = user_length * descr->token_size;
+
+			/* Note : user_length is originally a __u16,
+			 * and token_size is controlled by us,
+			 * so extra_size won't get negative and
+			 * won't overflow...
+			 */
+		}
+	}
+
+	/* kzalloc() ensures NULL-termination for essid_compat. */
+	extra = kzalloc(extra_size, GFP_KERNEL);
+	if (!extra)
+		return -ENOMEM;
+
+	/* If it is a SET, get all the extra data in here */
+	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
+		if (copy_from_user(extra, iwp->pointer,
+				   iwp->length *
+				   descr->token_size)) {
+			err = -EFAULT;
+			goto out;
+		}
+
+		if (cmd == SIOCSIWENCODEEXT) {
+			struct iw_encode_ext *ee = (void *) extra;
+
+			if (iwp->length < sizeof(*ee) + ee->key_len)
+				return -EFAULT;
+		}
+	}
+
+	err = handler(dev, info, (union iwreq_data *) iwp, extra);
+
+	iwp->length += essid_compat;
+
+	/* If we have something to return to the user */
+	if (!err && IW_IS_GET(cmd)) {
+		/* Check if there is enough buffer up there */
+		if (user_length < iwp->length) {
+			err = -E2BIG;
+			goto out;
+		}
+
+		if (copy_to_user(iwp->pointer, extra,
+				 iwp->length *
+				 descr->token_size)) {
+			err = -EFAULT;
+			goto out;
+		}
+	}
+
+	/* Generate an event to notify listeners of the change */
+	if ((descr->flags & IW_DESCR_FLAG_EVENT) &&
+	    ((err == 0) || (err == -EIWCOMMIT))) {
+		union iwreq_data *data = (union iwreq_data *) iwp;
+
+		if (descr->flags & IW_DESCR_FLAG_RESTRICT)
+			/* If the event is restricted, don't
+			 * export the payload.
+			 */
+			wireless_send_event(dev, cmd, data, NULL);
+		else
+			wireless_send_event(dev, cmd, data, extra);
+	}
+
+out:
+	kfree(extra);
+	return err;
+}
+
+/*
+ * Call the commit handler in the driver
+ * (if exist and if conditions are right)
+ *
+ * Note : our current commit strategy is currently pretty dumb,
+ * but we will be able to improve on that...
+ * The goal is to try to agreagate as many changes as possible
+ * before doing the commit. Drivers that will define a commit handler
+ * are usually those that need a reset after changing parameters, so
+ * we want to minimise the number of reset.
+ * A cool idea is to use a timer : at each "set" command, we re-set the
+ * timer, when the timer eventually fires, we call the driver.
+ * Hopefully, more on that later.
+ *
+ * Also, I'm waiting to see how many people will complain about the
+ * netif_running(dev) test. I'm open on that one...
+ * Hopefully, the driver will remember to do a commit in "open()" ;-)
+ */
+int call_commit_handler(struct net_device *dev)
+{
+#ifdef CONFIG_WIRELESS_EXT
+	if ((netif_running(dev)) &&
+	   (dev->wireless_handlers->standard[0] != NULL))
+		/* Call the commit handler on the driver */
+		return dev->wireless_handlers->standard[0](dev, NULL,
+							   NULL, NULL);
+	else
+		return 0;		/* Command completed successfully */
+#else
+	/* cfg80211 has no commit */
+	return 0;
+#endif
+}
+
+/*
+ * Main IOCTl dispatcher.
+ * Check the type of IOCTL and call the appropriate wrapper...
+ */
+static int wireless_process_ioctl(struct net *net, struct ifreq *ifr,
+				  unsigned int cmd,
+				  struct iw_request_info *info,
+				  wext_ioctl_func standard,
+				  wext_ioctl_func private)
+{
+	struct iwreq *iwr = (struct iwreq *) ifr;
+	struct net_device *dev;
+	iw_handler	handler;
+
+	/* Permissions are already checked in dev_ioctl() before calling us.
+	 * The copy_to/from_user() of ifr is also dealt with in there */
+
+	/* Make sure the device exist */
+	if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL)
+		return -ENODEV;
+
+	/* A bunch of special cases, then the generic case...
+	 * Note that 'cmd' is already filtered in dev_ioctl() with
+	 * (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) */
+	if (cmd == SIOCGIWSTATS)
+		return standard(dev, iwr, cmd, info,
+				&iw_handler_get_iwstats);
+
+#ifdef CONFIG_WEXT_PRIV
+	if (cmd == SIOCGIWPRIV && dev->wireless_handlers)
+		return standard(dev, iwr, cmd, info,
+				iw_handler_get_private);
+#endif
+
+	/* Basic check */
+	if (!netif_device_present(dev))
+		return -ENODEV;
+
+	/* New driver API : try to find the handler */
+	handler = get_handler(dev, cmd);
+	if (handler) {
+		/* Standard and private are not the same */
+		if (cmd < SIOCIWFIRSTPRIV)
+			return standard(dev, iwr, cmd, info, handler);
+		else if (private)
+			return private(dev, iwr, cmd, info, handler);
+	}
+	/* Old driver API : call driver ioctl handler */
+	if (dev->netdev_ops->ndo_do_ioctl)
+		return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
+	return -EOPNOTSUPP;
+}
+
+/* If command is `set a parameter', or `get the encoding parameters',
+ * check if the user has the right to do it.
+ */
+static int wext_permission_check(unsigned int cmd)
+{
+	if ((IW_IS_SET(cmd) || cmd == SIOCGIWENCODE ||
+	     cmd == SIOCGIWENCODEEXT) &&
+	    !capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	return 0;
+}
+
+/* entry point from dev ioctl */
+static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr,
+			       unsigned int cmd, struct iw_request_info *info,
+			       wext_ioctl_func standard,
+			       wext_ioctl_func private)
+{
+	int ret = wext_permission_check(cmd);
+
+	if (ret)
+		return ret;
+
+	dev_load(net, ifr->ifr_name);
+	rtnl_lock();
+	ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private);
+	rtnl_unlock();
+
+	return ret;
+}
+
+/*
+ * Wrapper to call a standard Wireless Extension handler.
+ * We do various checks and also take care of moving data between
+ * user space and kernel space.
+ */
+static int ioctl_standard_call(struct net_device *	dev,
+			       struct iwreq		*iwr,
+			       unsigned int		cmd,
+			       struct iw_request_info	*info,
+			       iw_handler		handler)
+{
+	const struct iw_ioctl_description *	descr;
+	int					ret = -EINVAL;
+
+	/* Get the description of the IOCTL */
+	if ((cmd - SIOCIWFIRST) >= standard_ioctl_num)
+		return -EOPNOTSUPP;
+	descr = &(standard_ioctl[cmd - SIOCIWFIRST]);
+
+	/* Check if we have a pointer to user space data or not */
+	if (descr->header_type != IW_HEADER_TYPE_POINT) {
+
+		/* No extra arguments. Trivial to handle */
+		ret = handler(dev, info, &(iwr->u), NULL);
+
+		/* Generate an event to notify listeners of the change */
+		if ((descr->flags & IW_DESCR_FLAG_EVENT) &&
+		   ((ret == 0) || (ret == -EIWCOMMIT)))
+			wireless_send_event(dev, cmd, &(iwr->u), NULL);
+	} else {
+		ret = ioctl_standard_iw_point(&iwr->u.data, cmd, descr,
+					      handler, dev, info);
+	}
+
+	/* Call commit handler if needed and defined */
+	if (ret == -EIWCOMMIT)
+		ret = call_commit_handler(dev);
+
+	/* Here, we will generate the appropriate event if needed */
+
+	return ret;
+}
+
+
+int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
+		      void __user *arg)
+{
+	struct iw_request_info info = { .cmd = cmd, .flags = 0 };
+	int ret;
+
+	ret = wext_ioctl_dispatch(net, ifr, cmd, &info,
+				  ioctl_standard_call,
+				  ioctl_private_call);
+	if (ret >= 0 &&
+	    IW_IS_GET(cmd) &&
+	    copy_to_user(arg, ifr, sizeof(struct iwreq)))
+		return -EFAULT;
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static int compat_standard_call(struct net_device	*dev,
+				struct iwreq		*iwr,
+				unsigned int		cmd,
+				struct iw_request_info	*info,
+				iw_handler		handler)
+{
+	const struct iw_ioctl_description *descr;
+	struct compat_iw_point *iwp_compat;
+	struct iw_point iwp;
+	int err;
+
+	descr = standard_ioctl + (cmd - SIOCIWFIRST);
+
+	if (descr->header_type != IW_HEADER_TYPE_POINT)
+		return ioctl_standard_call(dev, iwr, cmd, info, handler);
+
+	iwp_compat = (struct compat_iw_point *) &iwr->u.data;
+	iwp.pointer = compat_ptr(iwp_compat->pointer);
+	iwp.length = iwp_compat->length;
+	iwp.flags = iwp_compat->flags;
+
+	err = ioctl_standard_iw_point(&iwp, cmd, descr, handler, dev, info);
+
+	iwp_compat->pointer = ptr_to_compat(iwp.pointer);
+	iwp_compat->length = iwp.length;
+	iwp_compat->flags = iwp.flags;
+
+	return err;
+}
+
+int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
+			     unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	struct iw_request_info info;
+	struct iwreq iwr;
+	char *colon;
+	int ret;
+
+	if (copy_from_user(&iwr, argp, sizeof(struct iwreq)))
+		return -EFAULT;
+
+	iwr.ifr_name[IFNAMSIZ-1] = 0;
+	colon = strchr(iwr.ifr_name, ':');
+	if (colon)
+		*colon = 0;
+
+	info.cmd = cmd;
+	info.flags = IW_REQUEST_FLAG_COMPAT;
+
+	ret = wext_ioctl_dispatch(net, (struct ifreq *) &iwr, cmd, &info,
+				  compat_standard_call,
+				  compat_private_call);
+
+	if (ret >= 0 &&
+	    IW_IS_GET(cmd) &&
+	    copy_to_user(argp, &iwr, sizeof(struct iwreq)))
+		return -EFAULT;
+
+	return ret;
+}
+#endif
diff --git a/net/wireless/wext-priv.c b/net/wireless/wext-priv.c
new file mode 100644
index 0000000..a3c2277
--- /dev/null
+++ b/net/wireless/wext-priv.c
@@ -0,0 +1,248 @@
+/*
+ * This file implement the Wireless Extensions priv API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ * Copyright	2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <net/iw_handler.h>
+#include <net/wext.h>
+
+int iw_handler_get_private(struct net_device *		dev,
+			   struct iw_request_info *	info,
+			   union iwreq_data *		wrqu,
+			   char *			extra)
+{
+	/* Check if the driver has something to export */
+	if ((dev->wireless_handlers->num_private_args == 0) ||
+	   (dev->wireless_handlers->private_args == NULL))
+		return -EOPNOTSUPP;
+
+	/* Check if there is enough buffer up there */
+	if (wrqu->data.length < dev->wireless_handlers->num_private_args) {
+		/* User space can't know in advance how large the buffer
+		 * needs to be. Give it a hint, so that we can support
+		 * any size buffer we want somewhat efficiently... */
+		wrqu->data.length = dev->wireless_handlers->num_private_args;
+		return -E2BIG;
+	}
+
+	/* Set the number of available ioctls. */
+	wrqu->data.length = dev->wireless_handlers->num_private_args;
+
+	/* Copy structure to the user buffer. */
+	memcpy(extra, dev->wireless_handlers->private_args,
+	       sizeof(struct iw_priv_args) * wrqu->data.length);
+
+	return 0;
+}
+
+/* Size (in bytes) of the various private data types */
+static const char iw_priv_type_size[] = {
+	0,				/* IW_PRIV_TYPE_NONE */
+	1,				/* IW_PRIV_TYPE_BYTE */
+	1,				/* IW_PRIV_TYPE_CHAR */
+	0,				/* Not defined */
+	sizeof(__u32),			/* IW_PRIV_TYPE_INT */
+	sizeof(struct iw_freq),		/* IW_PRIV_TYPE_FLOAT */
+	sizeof(struct sockaddr),	/* IW_PRIV_TYPE_ADDR */
+	0,				/* Not defined */
+};
+
+static int get_priv_size(__u16 args)
+{
+	int	num = args & IW_PRIV_SIZE_MASK;
+	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
+
+	return num * iw_priv_type_size[type];
+}
+
+static int adjust_priv_size(__u16 args, struct iw_point *iwp)
+{
+	int	num = iwp->length;
+	int	max = args & IW_PRIV_SIZE_MASK;
+	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
+
+	/* Make sure the driver doesn't goof up */
+	if (max < num)
+		num = max;
+
+	return num * iw_priv_type_size[type];
+}
+
+/*
+ * Wrapper to call a private Wireless Extension handler.
+ * We do various checks and also take care of moving data between
+ * user space and kernel space.
+ * It's not as nice and slimline as the standard wrapper. The cause
+ * is struct iw_priv_args, which was not really designed for the
+ * job we are going here.
+ *
+ * IMPORTANT : This function prevent to set and get data on the same
+ * IOCTL and enforce the SET/GET convention. Not doing it would be
+ * far too hairy...
+ * If you need to set and get data at the same time, please don't use
+ * a iw_handler but process it in your ioctl handler (i.e. use the
+ * old driver API).
+ */
+static int get_priv_descr_and_size(struct net_device *dev, unsigned int cmd,
+				   const struct iw_priv_args **descrp)
+{
+	const struct iw_priv_args *descr;
+	int i, extra_size;
+
+	descr = NULL;
+	for (i = 0; i < dev->wireless_handlers->num_private_args; i++) {
+		if (cmd == dev->wireless_handlers->private_args[i].cmd) {
+			descr = &dev->wireless_handlers->private_args[i];
+			break;
+		}
+	}
+
+	extra_size = 0;
+	if (descr) {
+		if (IW_IS_SET(cmd)) {
+			int	offset = 0;	/* For sub-ioctls */
+			/* Check for sub-ioctl handler */
+			if (descr->name[0] == '\0')
+				/* Reserve one int for sub-ioctl index */
+				offset = sizeof(__u32);
+
+			/* Size of set arguments */
+			extra_size = get_priv_size(descr->set_args);
+
+			/* Does it fits in iwr ? */
+			if ((descr->set_args & IW_PRIV_SIZE_FIXED) &&
+			   ((extra_size + offset) <= IFNAMSIZ))
+				extra_size = 0;
+		} else {
+			/* Size of get arguments */
+			extra_size = get_priv_size(descr->get_args);
+
+			/* Does it fits in iwr ? */
+			if ((descr->get_args & IW_PRIV_SIZE_FIXED) &&
+			   (extra_size <= IFNAMSIZ))
+				extra_size = 0;
+		}
+	}
+	*descrp = descr;
+	return extra_size;
+}
+
+static int ioctl_private_iw_point(struct iw_point *iwp, unsigned int cmd,
+				  const struct iw_priv_args *descr,
+				  iw_handler handler, struct net_device *dev,
+				  struct iw_request_info *info, int extra_size)
+{
+	char *extra;
+	int err;
+
+	/* Check what user space is giving us */
+	if (IW_IS_SET(cmd)) {
+		if (!iwp->pointer && iwp->length != 0)
+			return -EFAULT;
+
+		if (iwp->length > (descr->set_args & IW_PRIV_SIZE_MASK))
+			return -E2BIG;
+	} else if (!iwp->pointer)
+		return -EFAULT;
+
+	extra = kmalloc(extra_size, GFP_KERNEL);
+	if (!extra)
+		return -ENOMEM;
+
+	/* If it is a SET, get all the extra data in here */
+	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
+		if (copy_from_user(extra, iwp->pointer, extra_size)) {
+			err = -EFAULT;
+			goto out;
+		}
+	}
+
+	/* Call the handler */
+	err = handler(dev, info, (union iwreq_data *) iwp, extra);
+
+	/* If we have something to return to the user */
+	if (!err && IW_IS_GET(cmd)) {
+		/* Adjust for the actual length if it's variable,
+		 * avoid leaking kernel bits outside.
+		 */
+		if (!(descr->get_args & IW_PRIV_SIZE_FIXED))
+			extra_size = adjust_priv_size(descr->get_args, iwp);
+
+		if (copy_to_user(iwp->pointer, extra, extra_size))
+			err =  -EFAULT;
+	}
+
+out:
+	kfree(extra);
+	return err;
+}
+
+int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
+		       unsigned int cmd, struct iw_request_info *info,
+		       iw_handler handler)
+{
+	int extra_size = 0, ret = -EINVAL;
+	const struct iw_priv_args *descr;
+
+	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
+
+	/* Check if we have a pointer to user space data or not. */
+	if (extra_size == 0) {
+		/* No extra arguments. Trivial to handle */
+		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
+	} else {
+		ret = ioctl_private_iw_point(&iwr->u.data, cmd, descr,
+					     handler, dev, info, extra_size);
+	}
+
+	/* Call commit handler if needed and defined */
+	if (ret == -EIWCOMMIT)
+		ret = call_commit_handler(dev);
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+int compat_private_call(struct net_device *dev, struct iwreq *iwr,
+			unsigned int cmd, struct iw_request_info *info,
+			iw_handler handler)
+{
+	const struct iw_priv_args *descr;
+	int ret, extra_size;
+
+	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
+
+	/* Check if we have a pointer to user space data or not. */
+	if (extra_size == 0) {
+		/* No extra arguments. Trivial to handle */
+		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
+	} else {
+		struct compat_iw_point *iwp_compat;
+		struct iw_point iwp;
+
+		iwp_compat = (struct compat_iw_point *) &iwr->u.data;
+		iwp.pointer = compat_ptr(iwp_compat->pointer);
+		iwp.length = iwp_compat->length;
+		iwp.flags = iwp_compat->flags;
+
+		ret = ioctl_private_iw_point(&iwp, cmd, descr,
+					     handler, dev, info, extra_size);
+
+		iwp_compat->pointer = ptr_to_compat(iwp.pointer);
+		iwp_compat->length = iwp.length;
+		iwp_compat->flags = iwp.flags;
+	}
+
+	/* Call commit handler if needed and defined */
+	if (ret == -EIWCOMMIT)
+		ret = call_commit_handler(dev);
+
+	return ret;
+}
+#endif
diff --git a/net/wireless/wext-proc.c b/net/wireless/wext-proc.c
new file mode 100644
index 0000000..273a7f7
--- /dev/null
+++ b/net/wireless/wext-proc.c
@@ -0,0 +1,155 @@
+/*
+ * This file implement the Wireless Extensions proc API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+
+/*
+ * The /proc/net/wireless file is a human readable user-space interface
+ * exporting various wireless specific statistics from the wireless devices.
+ * This is the most popular part of the Wireless Extensions ;-)
+ *
+ * This interface is a pure clone of /proc/net/dev (in net/core/dev.c).
+ * The content of the file is basically the content of "struct iw_statistics".
+ */
+
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/iw_handler.h>
+#include <net/wext.h>
+
+
+static void wireless_seq_printf_stats(struct seq_file *seq,
+				      struct net_device *dev)
+{
+	/* Get stats from the driver */
+	struct iw_statistics *stats = get_wireless_stats(dev);
+	static struct iw_statistics nullstats = {};
+
+	/* show device if it's wireless regardless of current stats */
+	if (!stats) {
+#ifdef CONFIG_WIRELESS_EXT
+		if (dev->wireless_handlers)
+			stats = &nullstats;
+#endif
+#ifdef CONFIG_CFG80211
+		if (dev->ieee80211_ptr)
+			stats = &nullstats;
+#endif
+	}
+
+	if (stats) {
+		seq_printf(seq, "%6s: %04x  %3d%c  %3d%c  %3d%c  %6d %6d %6d "
+				"%6d %6d   %6d\n",
+			   dev->name, stats->status, stats->qual.qual,
+			   stats->qual.updated & IW_QUAL_QUAL_UPDATED
+			   ? '.' : ' ',
+			   ((__s32) stats->qual.level) -
+			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
+			   stats->qual.updated & IW_QUAL_LEVEL_UPDATED
+			   ? '.' : ' ',
+			   ((__s32) stats->qual.noise) -
+			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
+			   stats->qual.updated & IW_QUAL_NOISE_UPDATED
+			   ? '.' : ' ',
+			   stats->discard.nwid, stats->discard.code,
+			   stats->discard.fragment, stats->discard.retries,
+			   stats->discard.misc, stats->miss.beacon);
+
+		if (stats != &nullstats)
+			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
+	}
+}
+
+/* ---------------------------------------------------------------- */
+/*
+ * Print info for /proc/net/wireless (print all entries)
+ */
+static int wireless_dev_seq_show(struct seq_file *seq, void *v)
+{
+	might_sleep();
+
+	if (v == SEQ_START_TOKEN)
+		seq_printf(seq, "Inter-| sta-|   Quality        |   Discarded "
+				"packets               | Missed | WE\n"
+				" face | tus | link level noise |  nwid  "
+				"crypt   frag  retry   misc | beacon | %d\n",
+			   WIRELESS_EXT);
+	else
+		wireless_seq_printf_stats(seq, v);
+	return 0;
+}
+
+static void *wireless_dev_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+	loff_t off;
+	struct net_device *dev;
+
+	rtnl_lock();
+	if (!*pos)
+		return SEQ_START_TOKEN;
+
+	off = 1;
+	for_each_netdev(net, dev)
+		if (off++ == *pos)
+			return dev;
+	return NULL;
+}
+
+static void *wireless_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+
+	++*pos;
+
+	return v == SEQ_START_TOKEN ?
+		first_net_device(net) : next_net_device(v);
+}
+
+static void wireless_dev_seq_stop(struct seq_file *seq, void *v)
+{
+	rtnl_unlock();
+}
+
+static const struct seq_operations wireless_seq_ops = {
+	.start = wireless_dev_seq_start,
+	.next  = wireless_dev_seq_next,
+	.stop  = wireless_dev_seq_stop,
+	.show  = wireless_dev_seq_show,
+};
+
+static int seq_open_wireless(struct inode *inode, struct file *file)
+{
+	return seq_open_net(inode, file, &wireless_seq_ops,
+			    sizeof(struct seq_net_private));
+}
+
+static const struct file_operations wireless_seq_fops = {
+	.owner	 = THIS_MODULE,
+	.open    = seq_open_wireless,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release_net,
+};
+
+int wext_proc_init(struct net *net)
+{
+	/* Create /proc/net/wireless entry */
+	if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops))
+		return -ENOMEM;
+
+	return 0;
+}
+
+void wext_proc_exit(struct net *net)
+{
+	proc_net_remove(net, "wireless");
+}
diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
new file mode 100644
index 0000000..6dcfe65
--- /dev/null
+++ b/net/wireless/wext-spy.c
@@ -0,0 +1,231 @@
+/*
+ * This file implement the Wireless Extensions spy API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/iw_handler.h>
+#include <net/arp.h>
+#include <net/wext.h>
+
+static inline struct iw_spy_data *get_spydata(struct net_device *dev)
+{
+	/* This is the new way */
+	if (dev->wireless_data)
+		return dev->wireless_data->spy_data;
+	return NULL;
+}
+
+int iw_handler_set_spy(struct net_device *	dev,
+		       struct iw_request_info *	info,
+		       union iwreq_data *	wrqu,
+		       char *			extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct sockaddr *	address = (struct sockaddr *) extra;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	/* Disable spy collection while we copy the addresses.
+	 * While we copy addresses, any call to wireless_spy_update()
+	 * will NOP. This is OK, as anyway the addresses are changing. */
+	spydata->spy_number = 0;
+
+	/* We want to operate without locking, because wireless_spy_update()
+	 * most likely will happen in the interrupt handler, and therefore
+	 * have its own locking constraints and needs performance.
+	 * The rtnl_lock() make sure we don't race with the other iw_handlers.
+	 * This make sure wireless_spy_update() "see" that the spy list
+	 * is temporarily disabled. */
+	smp_wmb();
+
+	/* Are there are addresses to copy? */
+	if (wrqu->data.length > 0) {
+		int i;
+
+		/* Copy addresses */
+		for (i = 0; i < wrqu->data.length; i++)
+			memcpy(spydata->spy_address[i], address[i].sa_data,
+			       ETH_ALEN);
+		/* Reset stats */
+		memset(spydata->spy_stat, 0,
+		       sizeof(struct iw_quality) * IW_MAX_SPY);
+	}
+
+	/* Make sure above is updated before re-enabling */
+	smp_wmb();
+
+	/* Enable addresses */
+	spydata->spy_number = wrqu->data.length;
+
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_set_spy);
+
+int iw_handler_get_spy(struct net_device *	dev,
+		       struct iw_request_info *	info,
+		       union iwreq_data *	wrqu,
+		       char *			extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct sockaddr *	address = (struct sockaddr *) extra;
+	int			i;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	wrqu->data.length = spydata->spy_number;
+
+	/* Copy addresses. */
+	for (i = 0; i < spydata->spy_number; i++) 	{
+		memcpy(address[i].sa_data, spydata->spy_address[i], ETH_ALEN);
+		address[i].sa_family = AF_UNIX;
+	}
+	/* Copy stats to the user buffer (just after). */
+	if (spydata->spy_number > 0)
+		memcpy(extra  + (sizeof(struct sockaddr) *spydata->spy_number),
+		       spydata->spy_stat,
+		       sizeof(struct iw_quality) * spydata->spy_number);
+	/* Reset updated flags. */
+	for (i = 0; i < spydata->spy_number; i++)
+		spydata->spy_stat[i].updated &= ~IW_QUAL_ALL_UPDATED;
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_get_spy);
+
+/*------------------------------------------------------------------*/
+/*
+ * Standard Wireless Handler : set spy threshold
+ */
+int iw_handler_set_thrspy(struct net_device *	dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *	wrqu,
+			  char *		extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	/* Just do it */
+	memcpy(&(spydata->spy_thr_low), &(threshold->low),
+	       2 * sizeof(struct iw_quality));
+
+	/* Clear flag */
+	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
+
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_set_thrspy);
+
+/*------------------------------------------------------------------*/
+/*
+ * Standard Wireless Handler : get spy threshold
+ */
+int iw_handler_get_thrspy(struct net_device *	dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *	wrqu,
+			  char *		extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	/* Just do it */
+	memcpy(&(threshold->low), &(spydata->spy_thr_low),
+	       2 * sizeof(struct iw_quality));
+
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_get_thrspy);
+
+/*------------------------------------------------------------------*/
+/*
+ * Prepare and send a Spy Threshold event
+ */
+static void iw_send_thrspy_event(struct net_device *	dev,
+				 struct iw_spy_data *	spydata,
+				 unsigned char *	address,
+				 struct iw_quality *	wstats)
+{
+	union iwreq_data	wrqu;
+	struct iw_thrspy	threshold;
+
+	/* Init */
+	wrqu.data.length = 1;
+	wrqu.data.flags = 0;
+	/* Copy address */
+	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
+	threshold.addr.sa_family = ARPHRD_ETHER;
+	/* Copy stats */
+	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+	/* Copy also thresholds */
+	memcpy(&(threshold.low), &(spydata->spy_thr_low),
+	       2 * sizeof(struct iw_quality));
+
+	/* Send event to user space */
+	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
+}
+
+/* ---------------------------------------------------------------- */
+/*
+ * Call for the driver to update the spy data.
+ * For now, the spy data is a simple array. As the size of the array is
+ * small, this is good enough. If we wanted to support larger number of
+ * spy addresses, we should use something more efficient...
+ */
+void wireless_spy_update(struct net_device *	dev,
+			 unsigned char *	address,
+			 struct iw_quality *	wstats)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	int			i;
+	int			match = -1;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return;
+
+	/* Update all records that match */
+	for (i = 0; i < spydata->spy_number; i++)
+		if (!compare_ether_addr(address, spydata->spy_address[i])) {
+			memcpy(&(spydata->spy_stat[i]), wstats,
+			       sizeof(struct iw_quality));
+			match = i;
+		}
+
+	/* Generate an event if we cross the spy threshold.
+	 * To avoid event storms, we have a simple hysteresis : we generate
+	 * event only when we go under the low threshold or above the
+	 * high threshold. */
+	if (match >= 0) {
+		if (spydata->spy_thr_under[match]) {
+			if (wstats->level > spydata->spy_thr_high.level) {
+				spydata->spy_thr_under[match] = 0;
+				iw_send_thrspy_event(dev, spydata,
+						     address, wstats);
+			}
+		} else {
+			if (wstats->level < spydata->spy_thr_low.level) {
+				spydata->spy_thr_under[match] = 1;
+				iw_send_thrspy_event(dev, spydata,
+						     address, wstats);
+			}
+		}
+	}
+}
+EXPORT_SYMBOL(wireless_spy_update);
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
deleted file mode 100644
index 60fe5776..0000000
--- a/net/wireless/wext.c
+++ /dev/null
@@ -1,1775 +0,0 @@
-/*
- * This file implement the Wireless Extensions APIs.
- *
- * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
- *
- * (As all part of the Linux kernel, this file is GPL)
- */
-
-/************************** DOCUMENTATION **************************/
-/*
- * API definition :
- * --------------
- * See <linux/wireless.h> for details of the APIs and the rest.
- *
- * History :
- * -------
- *
- * v1 - 5.12.01 - Jean II
- *	o Created this file.
- *
- * v2 - 13.12.01 - Jean II
- *	o Move /proc/net/wireless stuff from net/core/dev.c to here
- *	o Make Wireless Extension IOCTLs go through here
- *	o Added iw_handler handling ;-)
- *	o Added standard ioctl description
- *	o Initial dumb commit strategy based on orinoco.c
- *
- * v3 - 19.12.01 - Jean II
- *	o Make sure we don't go out of standard_ioctl[] in ioctl_standard_call
- *	o Add event dispatcher function
- *	o Add event description
- *	o Propagate events as rtnetlink IFLA_WIRELESS option
- *	o Generate event on selected SET requests
- *
- * v4 - 18.04.02 - Jean II
- *	o Fix stupid off by one in iw_ioctl_description : IW_ESSID_MAX_SIZE + 1
- *
- * v5 - 21.06.02 - Jean II
- *	o Add IW_PRIV_TYPE_ADDR in priv_type_size (+cleanup)
- *	o Reshuffle IW_HEADER_TYPE_XXX to map IW_PRIV_TYPE_XXX changes
- *	o Add IWEVCUSTOM for driver specific event/scanning token
- *	o Turn on WE_STRICT_WRITE by default + kernel warning
- *	o Fix WE_STRICT_WRITE in ioctl_export_private() (32 => iw_num)
- *	o Fix off-by-one in test (extra_size <= IFNAMSIZ)
- *
- * v6 - 9.01.03 - Jean II
- *	o Add common spy support : iw_handler_set_spy(), wireless_spy_update()
- *	o Add enhanced spy support : iw_handler_set_thrspy() and event.
- *	o Add WIRELESS_EXT version display in /proc/net/wireless
- *
- * v6 - 18.06.04 - Jean II
- *	o Change get_spydata() method for added safety
- *	o Remove spy #ifdef, they are always on -> cleaner code
- *	o Allow any size GET request if user specifies length > max
- *		and if request has IW_DESCR_FLAG_NOMAX flag or is SIOCGIWPRIV
- *	o Start migrating get_wireless_stats to struct iw_handler_def
- *	o Add wmb() in iw_handler_set_spy() for non-coherent archs/cpus
- * Based on patch from Pavel Roskin <proski@gnu.org> :
- *	o Fix kernel data leak to user space in private handler handling
- *
- * v7 - 18.3.05 - Jean II
- *	o Remove (struct iw_point *)->pointer from events and streams
- *	o Remove spy_offset from struct iw_handler_def
- *	o Start deprecating dev->get_wireless_stats, output a warning
- *	o If IW_QUAL_DBM is set, show dBm values in /proc/net/wireless
- *	o Don't lose INVALID/DBM flags when clearing UPDATED flags (iwstats)
- *
- * v8 - 17.02.06 - Jean II
- *	o RtNetlink requests support (SET/GET)
- *
- * v8b - 03.08.06 - Herbert Xu
- *	o Fix Wireless Event locking issues.
- *
- * v9 - 14.3.06 - Jean II
- *	o Change length in ESSID and NICK to strlen() instead of strlen()+1
- *	o Make standard_ioctl_num and standard_event_num unsigned
- *	o Remove (struct net_device *)->get_wireless_stats()
- *
- * v10 - 16.3.07 - Jean II
- *	o Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/module.h>
-#include <linux/types.h>		/* off_t */
-#include <linux/netdevice.h>		/* struct ifreq, dev_get_by_name() */
-#include <linux/proc_fs.h>
-#include <linux/rtnetlink.h>		/* rtnetlink stuff */
-#include <linux/seq_file.h>
-#include <linux/init.h>			/* for __init */
-#include <linux/if_arp.h>		/* ARPHRD_ETHER */
-#include <linux/etherdevice.h>		/* compare_ether_addr */
-#include <linux/interrupt.h>
-#include <net/net_namespace.h>
-
-#include <linux/wireless.h>		/* Pretty obvious */
-#include <net/iw_handler.h>		/* New driver API */
-#include <net/netlink.h>
-#include <net/wext.h>
-
-#include <asm/uaccess.h>		/* copy_to_user() */
-
-/************************* GLOBAL VARIABLES *************************/
-/*
- * You should not use global variables, because of re-entrancy.
- * On our case, it's only const, so it's OK...
- */
-/*
- * Meta-data about all the standard Wireless Extension request we
- * know about.
- */
-static const struct iw_ioctl_description standard_ioctl[] = {
-	[SIOCSIWCOMMIT	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWNAME	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_CHAR,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWNWID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWNWID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWFREQ	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_FREQ,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWFREQ	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_FREQ,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWMODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_UINT,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWMODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_UINT,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWSENS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWSENS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWRANGE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWRANGE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_range),
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWPRIV	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWPRIV	- SIOCIWFIRST] = { /* (handled directly by us) */
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct iw_priv_args),
-		.max_tokens	= 16,
-		.flags		= IW_DESCR_FLAG_NOMAX,
-	},
-	[SIOCSIWSTATS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWSTATS	- SIOCIWFIRST] = { /* (handled directly by us) */
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_statistics),
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct sockaddr),
-		.max_tokens	= IW_MAX_SPY,
-	},
-	[SIOCGIWSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct sockaddr) +
-				  sizeof(struct iw_quality),
-		.max_tokens	= IW_MAX_SPY,
-	},
-	[SIOCSIWTHRSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct iw_thrspy),
-		.min_tokens	= 1,
-		.max_tokens	= 1,
-	},
-	[SIOCGIWTHRSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct iw_thrspy),
-		.min_tokens	= 1,
-		.max_tokens	= 1,
-	},
-	[SIOCSIWAP	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[SIOCGIWAP	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWMLME	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_mlme),
-		.max_tokens	= sizeof(struct iw_mlme),
-	},
-	[SIOCGIWAPLIST	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct sockaddr) +
-				  sizeof(struct iw_quality),
-		.max_tokens	= IW_MAX_AP,
-		.flags		= IW_DESCR_FLAG_NOMAX,
-	},
-	[SIOCSIWSCAN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= 0,
-		.max_tokens	= sizeof(struct iw_scan_req),
-	},
-	[SIOCGIWSCAN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_SCAN_MAX_DATA,
-		.flags		= IW_DESCR_FLAG_NOMAX,
-	},
-	[SIOCSIWESSID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWESSID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWNICKN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-	},
-	[SIOCGIWNICKN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-	},
-	[SIOCSIWRATE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWRATE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWRTS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWRTS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWFRAG	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWFRAG	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWTXPOW	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWTXPOW	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWRETRY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWRETRY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWENCODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ENCODING_TOKEN_MAX,
-		.flags		= IW_DESCR_FLAG_EVENT | IW_DESCR_FLAG_RESTRICT,
-	},
-	[SIOCGIWENCODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ENCODING_TOKEN_MAX,
-		.flags		= IW_DESCR_FLAG_DUMP | IW_DESCR_FLAG_RESTRICT,
-	},
-	[SIOCSIWPOWER	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWPOWER	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWGENIE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[SIOCGIWGENIE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[SIOCSIWAUTH	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWAUTH	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWENCODEEXT - SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_encode_ext),
-		.max_tokens	= sizeof(struct iw_encode_ext) +
-				  IW_ENCODING_TOKEN_MAX,
-	},
-	[SIOCGIWENCODEEXT - SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_encode_ext),
-		.max_tokens	= sizeof(struct iw_encode_ext) +
-				  IW_ENCODING_TOKEN_MAX,
-	},
-	[SIOCSIWPMKSA - SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_pmksa),
-		.max_tokens	= sizeof(struct iw_pmksa),
-	},
-};
-static const unsigned standard_ioctl_num = ARRAY_SIZE(standard_ioctl);
-
-/*
- * Meta-data about all the additional standard Wireless Extension events
- * we know about.
- */
-static const struct iw_ioctl_description standard_event[] = {
-	[IWEVTXDROP	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[IWEVQUAL	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_QUAL,
-	},
-	[IWEVCUSTOM	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_CUSTOM_MAX,
-	},
-	[IWEVREGISTERED	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[IWEVEXPIRED	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[IWEVGENIE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[IWEVMICHAELMICFAILURE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_michaelmicfailure),
-	},
-	[IWEVASSOCREQIE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[IWEVASSOCRESPIE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[IWEVPMKIDCAND	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_pmkid_cand),
-	},
-};
-static const unsigned standard_event_num = ARRAY_SIZE(standard_event);
-
-/* Size (in bytes) of the various private data types */
-static const char iw_priv_type_size[] = {
-	0,				/* IW_PRIV_TYPE_NONE */
-	1,				/* IW_PRIV_TYPE_BYTE */
-	1,				/* IW_PRIV_TYPE_CHAR */
-	0,				/* Not defined */
-	sizeof(__u32),			/* IW_PRIV_TYPE_INT */
-	sizeof(struct iw_freq),		/* IW_PRIV_TYPE_FLOAT */
-	sizeof(struct sockaddr),	/* IW_PRIV_TYPE_ADDR */
-	0,				/* Not defined */
-};
-
-/* Size (in bytes) of various events */
-static const int event_type_size[] = {
-	IW_EV_LCP_LEN,			/* IW_HEADER_TYPE_NULL */
-	0,
-	IW_EV_CHAR_LEN,			/* IW_HEADER_TYPE_CHAR */
-	0,
-	IW_EV_UINT_LEN,			/* IW_HEADER_TYPE_UINT */
-	IW_EV_FREQ_LEN,			/* IW_HEADER_TYPE_FREQ */
-	IW_EV_ADDR_LEN,			/* IW_HEADER_TYPE_ADDR */
-	0,
-	IW_EV_POINT_LEN,		/* Without variable payload */
-	IW_EV_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
-	IW_EV_QUAL_LEN,			/* IW_HEADER_TYPE_QUAL */
-};
-
-#ifdef CONFIG_COMPAT
-static const int compat_event_type_size[] = {
-	IW_EV_COMPAT_LCP_LEN,		/* IW_HEADER_TYPE_NULL */
-	0,
-	IW_EV_COMPAT_CHAR_LEN,		/* IW_HEADER_TYPE_CHAR */
-	0,
-	IW_EV_COMPAT_UINT_LEN,		/* IW_HEADER_TYPE_UINT */
-	IW_EV_COMPAT_FREQ_LEN,		/* IW_HEADER_TYPE_FREQ */
-	IW_EV_COMPAT_ADDR_LEN,		/* IW_HEADER_TYPE_ADDR */
-	0,
-	IW_EV_COMPAT_POINT_LEN,		/* Without variable payload */
-	IW_EV_COMPAT_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
-	IW_EV_COMPAT_QUAL_LEN,		/* IW_HEADER_TYPE_QUAL */
-};
-#endif
-
-/************************ COMMON SUBROUTINES ************************/
-/*
- * Stuff that may be used in various place or doesn't fit in one
- * of the section below.
- */
-
-/* ---------------------------------------------------------------- */
-/*
- * Return the driver handler associated with a specific Wireless Extension.
- */
-static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
-{
-	/* Don't "optimise" the following variable, it will crash */
-	unsigned int	index;		/* *MUST* be unsigned */
-
-	/* Check if we have some wireless handlers defined */
-	if (dev->wireless_handlers == NULL)
-		return NULL;
-
-	/* Try as a standard command */
-	index = cmd - SIOCIWFIRST;
-	if (index < dev->wireless_handlers->num_standard)
-		return dev->wireless_handlers->standard[index];
-
-	/* Try as a private command */
-	index = cmd - SIOCIWFIRSTPRIV;
-	if (index < dev->wireless_handlers->num_private)
-		return dev->wireless_handlers->private[index];
-
-	/* Not found */
-	return NULL;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Get statistics out of the driver
- */
-struct iw_statistics *get_wireless_stats(struct net_device *dev)
-{
-	/* New location */
-	if ((dev->wireless_handlers != NULL) &&
-	   (dev->wireless_handlers->get_wireless_stats != NULL))
-		return dev->wireless_handlers->get_wireless_stats(dev);
-
-	/* Not found */
-	return NULL;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Call the commit handler in the driver
- * (if exist and if conditions are right)
- *
- * Note : our current commit strategy is currently pretty dumb,
- * but we will be able to improve on that...
- * The goal is to try to agreagate as many changes as possible
- * before doing the commit. Drivers that will define a commit handler
- * are usually those that need a reset after changing parameters, so
- * we want to minimise the number of reset.
- * A cool idea is to use a timer : at each "set" command, we re-set the
- * timer, when the timer eventually fires, we call the driver.
- * Hopefully, more on that later.
- *
- * Also, I'm waiting to see how many people will complain about the
- * netif_running(dev) test. I'm open on that one...
- * Hopefully, the driver will remember to do a commit in "open()" ;-)
- */
-static int call_commit_handler(struct net_device *dev)
-{
-	if ((netif_running(dev)) &&
-	   (dev->wireless_handlers->standard[0] != NULL))
-		/* Call the commit handler on the driver */
-		return dev->wireless_handlers->standard[0](dev, NULL,
-							   NULL, NULL);
-	else
-		return 0;		/* Command completed successfully */
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Calculate size of private arguments
- */
-static int get_priv_size(__u16 args)
-{
-	int	num = args & IW_PRIV_SIZE_MASK;
-	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
-
-	return num * iw_priv_type_size[type];
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Re-calculate the size of private arguments
- */
-static int adjust_priv_size(__u16 args, struct iw_point *iwp)
-{
-	int	num = iwp->length;
-	int	max = args & IW_PRIV_SIZE_MASK;
-	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
-
-	/* Make sure the driver doesn't goof up */
-	if (max < num)
-		num = max;
-
-	return num * iw_priv_type_size[type];
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Standard Wireless Handler : get wireless stats
- *	Allow programatic access to /proc/net/wireless even if /proc
- *	doesn't exist... Also more efficient...
- */
-static int iw_handler_get_iwstats(struct net_device *		dev,
-				  struct iw_request_info *	info,
-				  union iwreq_data *		wrqu,
-				  char *			extra)
-{
-	/* Get stats from the driver */
-	struct iw_statistics *stats;
-
-	stats = get_wireless_stats(dev);
-	if (stats) {
-		/* Copy statistics to extra */
-		memcpy(extra, stats, sizeof(struct iw_statistics));
-		wrqu->data.length = sizeof(struct iw_statistics);
-
-		/* Check if we need to clear the updated flag */
-		if (wrqu->data.flags != 0)
-			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
-		return 0;
-	} else
-		return -EOPNOTSUPP;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Standard Wireless Handler : get iwpriv definitions
- * Export the driver private handler definition
- * They will be picked up by tools like iwpriv...
- */
-static int iw_handler_get_private(struct net_device *		dev,
-				  struct iw_request_info *	info,
-				  union iwreq_data *		wrqu,
-				  char *			extra)
-{
-	/* Check if the driver has something to export */
-	if ((dev->wireless_handlers->num_private_args == 0) ||
-	   (dev->wireless_handlers->private_args == NULL))
-		return -EOPNOTSUPP;
-
-	/* Check if there is enough buffer up there */
-	if (wrqu->data.length < dev->wireless_handlers->num_private_args) {
-		/* User space can't know in advance how large the buffer
-		 * needs to be. Give it a hint, so that we can support
-		 * any size buffer we want somewhat efficiently... */
-		wrqu->data.length = dev->wireless_handlers->num_private_args;
-		return -E2BIG;
-	}
-
-	/* Set the number of available ioctls. */
-	wrqu->data.length = dev->wireless_handlers->num_private_args;
-
-	/* Copy structure to the user buffer. */
-	memcpy(extra, dev->wireless_handlers->private_args,
-	       sizeof(struct iw_priv_args) * wrqu->data.length);
-
-	return 0;
-}
-
-
-/******************** /proc/net/wireless SUPPORT ********************/
-/*
- * The /proc/net/wireless file is a human readable user-space interface
- * exporting various wireless specific statistics from the wireless devices.
- * This is the most popular part of the Wireless Extensions ;-)
- *
- * This interface is a pure clone of /proc/net/dev (in net/core/dev.c).
- * The content of the file is basically the content of "struct iw_statistics".
- */
-
-#ifdef CONFIG_PROC_FS
-
-/* ---------------------------------------------------------------- */
-/*
- * Print one entry (line) of /proc/net/wireless
- */
-static void wireless_seq_printf_stats(struct seq_file *seq,
-				      struct net_device *dev)
-{
-	/* Get stats from the driver */
-	struct iw_statistics *stats = get_wireless_stats(dev);
-	static struct iw_statistics nullstats = {};
-
-	/* show device if it's wireless regardless of current stats */
-	if (!stats && dev->wireless_handlers)
-		stats = &nullstats;
-
-	if (stats) {
-		seq_printf(seq, "%6s: %04x  %3d%c  %3d%c  %3d%c  %6d %6d %6d "
-				"%6d %6d   %6d\n",
-			   dev->name, stats->status, stats->qual.qual,
-			   stats->qual.updated & IW_QUAL_QUAL_UPDATED
-			   ? '.' : ' ',
-			   ((__s32) stats->qual.level) -
-			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
-			   stats->qual.updated & IW_QUAL_LEVEL_UPDATED
-			   ? '.' : ' ',
-			   ((__s32) stats->qual.noise) -
-			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
-			   stats->qual.updated & IW_QUAL_NOISE_UPDATED
-			   ? '.' : ' ',
-			   stats->discard.nwid, stats->discard.code,
-			   stats->discard.fragment, stats->discard.retries,
-			   stats->discard.misc, stats->miss.beacon);
-
-		if (stats != &nullstats)
-			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
-	}
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Print info for /proc/net/wireless (print all entries)
- */
-static int wireless_dev_seq_show(struct seq_file *seq, void *v)
-{
-	might_sleep();
-
-	if (v == SEQ_START_TOKEN)
-		seq_printf(seq, "Inter-| sta-|   Quality        |   Discarded "
-				"packets               | Missed | WE\n"
-				" face | tus | link level noise |  nwid  "
-				"crypt   frag  retry   misc | beacon | %d\n",
-			   WIRELESS_EXT);
-	else
-		wireless_seq_printf_stats(seq, v);
-	return 0;
-}
-
-static void *wireless_dev_seq_start(struct seq_file *seq, loff_t *pos)
-{
-	struct net *net = seq_file_net(seq);
-	loff_t off;
-	struct net_device *dev;
-
-	rtnl_lock();
-	if (!*pos)
-		return SEQ_START_TOKEN;
-
-	off = 1;
-	for_each_netdev(net, dev)
-		if (off++ == *pos)
-			return dev;
-	return NULL;
-}
-
-static void *wireless_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct net *net = seq_file_net(seq);
-
-	++*pos;
-
-	return v == SEQ_START_TOKEN ?
-		first_net_device(net) : next_net_device(v);
-}
-
-static void wireless_dev_seq_stop(struct seq_file *seq, void *v)
-{
-	rtnl_unlock();
-}
-
-static const struct seq_operations wireless_seq_ops = {
-	.start = wireless_dev_seq_start,
-	.next  = wireless_dev_seq_next,
-	.stop  = wireless_dev_seq_stop,
-	.show  = wireless_dev_seq_show,
-};
-
-static int seq_open_wireless(struct inode *inode, struct file *file)
-{
-	return seq_open_net(inode, file, &wireless_seq_ops,
-			    sizeof(struct seq_net_private));
-}
-
-static const struct file_operations wireless_seq_fops = {
-	.owner	 = THIS_MODULE,
-	.open    = seq_open_wireless,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release_net,
-};
-
-int wext_proc_init(struct net *net)
-{
-	/* Create /proc/net/wireless entry */
-	if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops))
-		return -ENOMEM;
-
-	return 0;
-}
-
-void wext_proc_exit(struct net *net)
-{
-	proc_net_remove(net, "wireless");
-}
-#endif	/* CONFIG_PROC_FS */
-
-/************************** IOCTL SUPPORT **************************/
-/*
- * The original user space API to configure all those Wireless Extensions
- * is through IOCTLs.
- * In there, we check if we need to call the new driver API (iw_handler)
- * or just call the driver ioctl handler.
- */
-
-/* ---------------------------------------------------------------- */
-static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd,
-				   const struct iw_ioctl_description *descr,
-				   iw_handler handler, struct net_device *dev,
-				   struct iw_request_info *info)
-{
-	int err, extra_size, user_length = 0, essid_compat = 0;
-	char *extra;
-
-	/* Calculate space needed by arguments. Always allocate
-	 * for max space.
-	 */
-	extra_size = descr->max_tokens * descr->token_size;
-
-	/* Check need for ESSID compatibility for WE < 21 */
-	switch (cmd) {
-	case SIOCSIWESSID:
-	case SIOCGIWESSID:
-	case SIOCSIWNICKN:
-	case SIOCGIWNICKN:
-		if (iwp->length == descr->max_tokens + 1)
-			essid_compat = 1;
-		else if (IW_IS_SET(cmd) && (iwp->length != 0)) {
-			char essid[IW_ESSID_MAX_SIZE + 1];
-			unsigned int len;
-			len = iwp->length * descr->token_size;
-
-			if (len > IW_ESSID_MAX_SIZE)
-				return -EFAULT;
-
-			err = copy_from_user(essid, iwp->pointer, len);
-			if (err)
-				return -EFAULT;
-
-			if (essid[iwp->length - 1] == '\0')
-				essid_compat = 1;
-		}
-		break;
-	default:
-		break;
-	}
-
-	iwp->length -= essid_compat;
-
-	/* Check what user space is giving us */
-	if (IW_IS_SET(cmd)) {
-		/* Check NULL pointer */
-		if (!iwp->pointer && iwp->length != 0)
-			return -EFAULT;
-		/* Check if number of token fits within bounds */
-		if (iwp->length > descr->max_tokens)
-			return -E2BIG;
-		if (iwp->length < descr->min_tokens)
-			return -EINVAL;
-	} else {
-		/* Check NULL pointer */
-		if (!iwp->pointer)
-			return -EFAULT;
-		/* Save user space buffer size for checking */
-		user_length = iwp->length;
-
-		/* Don't check if user_length > max to allow forward
-		 * compatibility. The test user_length < min is
-		 * implied by the test at the end.
-		 */
-
-		/* Support for very large requests */
-		if ((descr->flags & IW_DESCR_FLAG_NOMAX) &&
-		    (user_length > descr->max_tokens)) {
-			/* Allow userspace to GET more than max so
-			 * we can support any size GET requests.
-			 * There is still a limit : -ENOMEM.
-			 */
-			extra_size = user_length * descr->token_size;
-
-			/* Note : user_length is originally a __u16,
-			 * and token_size is controlled by us,
-			 * so extra_size won't get negative and
-			 * won't overflow...
-			 */
-		}
-	}
-
-	/* kzalloc() ensures NULL-termination for essid_compat. */
-	extra = kzalloc(extra_size, GFP_KERNEL);
-	if (!extra)
-		return -ENOMEM;
-
-	/* If it is a SET, get all the extra data in here */
-	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
-		if (copy_from_user(extra, iwp->pointer,
-				   iwp->length *
-				   descr->token_size)) {
-			err = -EFAULT;
-			goto out;
-		}
-
-		if (cmd == SIOCSIWENCODEEXT) {
-			struct iw_encode_ext *ee = (void *) extra;
-
-			if (iwp->length < sizeof(*ee) + ee->key_len)
-				return -EFAULT;
-		}
-	}
-
-	err = handler(dev, info, (union iwreq_data *) iwp, extra);
-
-	iwp->length += essid_compat;
-
-	/* If we have something to return to the user */
-	if (!err && IW_IS_GET(cmd)) {
-		/* Check if there is enough buffer up there */
-		if (user_length < iwp->length) {
-			err = -E2BIG;
-			goto out;
-		}
-
-		if (copy_to_user(iwp->pointer, extra,
-				 iwp->length *
-				 descr->token_size)) {
-			err = -EFAULT;
-			goto out;
-		}
-	}
-
-	/* Generate an event to notify listeners of the change */
-	if ((descr->flags & IW_DESCR_FLAG_EVENT) && err == -EIWCOMMIT) {
-		union iwreq_data *data = (union iwreq_data *) iwp;
-
-		if (descr->flags & IW_DESCR_FLAG_RESTRICT)
-			/* If the event is restricted, don't
-			 * export the payload.
-			 */
-			wireless_send_event(dev, cmd, data, NULL);
-		else
-			wireless_send_event(dev, cmd, data, extra);
-	}
-
-out:
-	kfree(extra);
-	return err;
-}
-
-/*
- * Wrapper to call a standard Wireless Extension handler.
- * We do various checks and also take care of moving data between
- * user space and kernel space.
- */
-static int ioctl_standard_call(struct net_device *	dev,
-			       struct iwreq		*iwr,
-			       unsigned int		cmd,
-			       struct iw_request_info	*info,
-			       iw_handler		handler)
-{
-	const struct iw_ioctl_description *	descr;
-	int					ret = -EINVAL;
-
-	/* Get the description of the IOCTL */
-	if ((cmd - SIOCIWFIRST) >= standard_ioctl_num)
-		return -EOPNOTSUPP;
-	descr = &(standard_ioctl[cmd - SIOCIWFIRST]);
-
-	/* Check if we have a pointer to user space data or not */
-	if (descr->header_type != IW_HEADER_TYPE_POINT) {
-
-		/* No extra arguments. Trivial to handle */
-		ret = handler(dev, info, &(iwr->u), NULL);
-
-		/* Generate an event to notify listeners of the change */
-		if ((descr->flags & IW_DESCR_FLAG_EVENT) &&
-		   ((ret == 0) || (ret == -EIWCOMMIT)))
-			wireless_send_event(dev, cmd, &(iwr->u), NULL);
-	} else {
-		ret = ioctl_standard_iw_point(&iwr->u.data, cmd, descr,
-					      handler, dev, info);
-	}
-
-	/* Call commit handler if needed and defined */
-	if (ret == -EIWCOMMIT)
-		ret = call_commit_handler(dev);
-
-	/* Here, we will generate the appropriate event if needed */
-
-	return ret;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Wrapper to call a private Wireless Extension handler.
- * We do various checks and also take care of moving data between
- * user space and kernel space.
- * It's not as nice and slimline as the standard wrapper. The cause
- * is struct iw_priv_args, which was not really designed for the
- * job we are going here.
- *
- * IMPORTANT : This function prevent to set and get data on the same
- * IOCTL and enforce the SET/GET convention. Not doing it would be
- * far too hairy...
- * If you need to set and get data at the same time, please don't use
- * a iw_handler but process it in your ioctl handler (i.e. use the
- * old driver API).
- */
-static int get_priv_descr_and_size(struct net_device *dev, unsigned int cmd,
-				   const struct iw_priv_args **descrp)
-{
-	const struct iw_priv_args *descr;
-	int i, extra_size;
-
-	descr = NULL;
-	for (i = 0; i < dev->wireless_handlers->num_private_args; i++) {
-		if (cmd == dev->wireless_handlers->private_args[i].cmd) {
-			descr = &dev->wireless_handlers->private_args[i];
-			break;
-		}
-	}
-
-	extra_size = 0;
-	if (descr) {
-		if (IW_IS_SET(cmd)) {
-			int	offset = 0;	/* For sub-ioctls */
-			/* Check for sub-ioctl handler */
-			if (descr->name[0] == '\0')
-				/* Reserve one int for sub-ioctl index */
-				offset = sizeof(__u32);
-
-			/* Size of set arguments */
-			extra_size = get_priv_size(descr->set_args);
-
-			/* Does it fits in iwr ? */
-			if ((descr->set_args & IW_PRIV_SIZE_FIXED) &&
-			   ((extra_size + offset) <= IFNAMSIZ))
-				extra_size = 0;
-		} else {
-			/* Size of get arguments */
-			extra_size = get_priv_size(descr->get_args);
-
-			/* Does it fits in iwr ? */
-			if ((descr->get_args & IW_PRIV_SIZE_FIXED) &&
-			   (extra_size <= IFNAMSIZ))
-				extra_size = 0;
-		}
-	}
-	*descrp = descr;
-	return extra_size;
-}
-
-static int ioctl_private_iw_point(struct iw_point *iwp, unsigned int cmd,
-				  const struct iw_priv_args *descr,
-				  iw_handler handler, struct net_device *dev,
-				  struct iw_request_info *info, int extra_size)
-{
-	char *extra;
-	int err;
-
-	/* Check what user space is giving us */
-	if (IW_IS_SET(cmd)) {
-		if (!iwp->pointer && iwp->length != 0)
-			return -EFAULT;
-
-		if (iwp->length > (descr->set_args & IW_PRIV_SIZE_MASK))
-			return -E2BIG;
-	} else if (!iwp->pointer)
-		return -EFAULT;
-
-	extra = kmalloc(extra_size, GFP_KERNEL);
-	if (!extra)
-		return -ENOMEM;
-
-	/* If it is a SET, get all the extra data in here */
-	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
-		if (copy_from_user(extra, iwp->pointer, extra_size)) {
-			err = -EFAULT;
-			goto out;
-		}
-	}
-
-	/* Call the handler */
-	err = handler(dev, info, (union iwreq_data *) iwp, extra);
-
-	/* If we have something to return to the user */
-	if (!err && IW_IS_GET(cmd)) {
-		/* Adjust for the actual length if it's variable,
-		 * avoid leaking kernel bits outside.
-		 */
-		if (!(descr->get_args & IW_PRIV_SIZE_FIXED))
-			extra_size = adjust_priv_size(descr->get_args, iwp);
-
-		if (copy_to_user(iwp->pointer, extra, extra_size))
-			err =  -EFAULT;
-	}
-
-out:
-	kfree(extra);
-	return err;
-}
-
-static int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
-			      unsigned int cmd, struct iw_request_info *info,
-			      iw_handler handler)
-{
-	int extra_size = 0, ret = -EINVAL;
-	const struct iw_priv_args *descr;
-
-	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
-
-	/* Check if we have a pointer to user space data or not. */
-	if (extra_size == 0) {
-		/* No extra arguments. Trivial to handle */
-		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
-	} else {
-		ret = ioctl_private_iw_point(&iwr->u.data, cmd, descr,
-					     handler, dev, info, extra_size);
-	}
-
-	/* Call commit handler if needed and defined */
-	if (ret == -EIWCOMMIT)
-		ret = call_commit_handler(dev);
-
-	return ret;
-}
-
-/* ---------------------------------------------------------------- */
-typedef int (*wext_ioctl_func)(struct net_device *, struct iwreq *,
-			       unsigned int, struct iw_request_info *,
-			       iw_handler);
-
-/*
- * Main IOCTl dispatcher.
- * Check the type of IOCTL and call the appropriate wrapper...
- */
-static int wireless_process_ioctl(struct net *net, struct ifreq *ifr,
-				  unsigned int cmd,
-				  struct iw_request_info *info,
-				  wext_ioctl_func standard,
-				  wext_ioctl_func private)
-{
-	struct iwreq *iwr = (struct iwreq *) ifr;
-	struct net_device *dev;
-	iw_handler	handler;
-
-	/* Permissions are already checked in dev_ioctl() before calling us.
-	 * The copy_to/from_user() of ifr is also dealt with in there */
-
-	/* Make sure the device exist */
-	if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL)
-		return -ENODEV;
-
-	/* A bunch of special cases, then the generic case...
-	 * Note that 'cmd' is already filtered in dev_ioctl() with
-	 * (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) */
-	if (cmd == SIOCGIWSTATS)
-		return standard(dev, iwr, cmd, info,
-				&iw_handler_get_iwstats);
-
-	if (cmd == SIOCGIWPRIV && dev->wireless_handlers)
-		return standard(dev, iwr, cmd, info,
-				&iw_handler_get_private);
-
-	/* Basic check */
-	if (!netif_device_present(dev))
-		return -ENODEV;
-
-	/* New driver API : try to find the handler */
-	handler = get_handler(dev, cmd);
-	if (handler) {
-		/* Standard and private are not the same */
-		if (cmd < SIOCIWFIRSTPRIV)
-			return standard(dev, iwr, cmd, info, handler);
-		else
-			return private(dev, iwr, cmd, info, handler);
-	}
-	/* Old driver API : call driver ioctl handler */
-	if (dev->netdev_ops->ndo_do_ioctl)
-		return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
-	return -EOPNOTSUPP;
-}
-
-/* If command is `set a parameter', or `get the encoding parameters',
- * check if the user has the right to do it.
- */
-static int wext_permission_check(unsigned int cmd)
-{
-	if ((IW_IS_SET(cmd) || cmd == SIOCGIWENCODE || cmd == SIOCGIWENCODEEXT)
-	    && !capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	return 0;
-}
-
-/* entry point from dev ioctl */
-static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr,
-			       unsigned int cmd, struct iw_request_info *info,
-			       wext_ioctl_func standard,
-			       wext_ioctl_func private)
-{
-	int ret = wext_permission_check(cmd);
-
-	if (ret)
-		return ret;
-
-	dev_load(net, ifr->ifr_name);
-	rtnl_lock();
-	ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private);
-	rtnl_unlock();
-
-	return ret;
-}
-
-int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
-		      void __user *arg)
-{
-	struct iw_request_info info = { .cmd = cmd, .flags = 0 };
-	int ret;
-
-	ret = wext_ioctl_dispatch(net, ifr, cmd, &info,
-				  ioctl_standard_call,
-				  ioctl_private_call);
-	if (ret >= 0 &&
-	    IW_IS_GET(cmd) &&
-	    copy_to_user(arg, ifr, sizeof(struct iwreq)))
-		return -EFAULT;
-
-	return ret;
-}
-
-#ifdef CONFIG_COMPAT
-static int compat_standard_call(struct net_device	*dev,
-				struct iwreq		*iwr,
-				unsigned int		cmd,
-				struct iw_request_info	*info,
-				iw_handler		handler)
-{
-	const struct iw_ioctl_description *descr;
-	struct compat_iw_point *iwp_compat;
-	struct iw_point iwp;
-	int err;
-
-	descr = standard_ioctl + (cmd - SIOCIWFIRST);
-
-	if (descr->header_type != IW_HEADER_TYPE_POINT)
-		return ioctl_standard_call(dev, iwr, cmd, info, handler);
-
-	iwp_compat = (struct compat_iw_point *) &iwr->u.data;
-	iwp.pointer = compat_ptr(iwp_compat->pointer);
-	iwp.length = iwp_compat->length;
-	iwp.flags = iwp_compat->flags;
-
-	err = ioctl_standard_iw_point(&iwp, cmd, descr, handler, dev, info);
-
-	iwp_compat->pointer = ptr_to_compat(iwp.pointer);
-	iwp_compat->length = iwp.length;
-	iwp_compat->flags = iwp.flags;
-
-	return err;
-}
-
-static int compat_private_call(struct net_device *dev, struct iwreq *iwr,
-			       unsigned int cmd, struct iw_request_info *info,
-			       iw_handler handler)
-{
-	const struct iw_priv_args *descr;
-	int ret, extra_size;
-
-	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
-
-	/* Check if we have a pointer to user space data or not. */
-	if (extra_size == 0) {
-		/* No extra arguments. Trivial to handle */
-		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
-	} else {
-		struct compat_iw_point *iwp_compat;
-		struct iw_point iwp;
-
-		iwp_compat = (struct compat_iw_point *) &iwr->u.data;
-		iwp.pointer = compat_ptr(iwp_compat->pointer);
-		iwp.length = iwp_compat->length;
-		iwp.flags = iwp_compat->flags;
-
-		ret = ioctl_private_iw_point(&iwp, cmd, descr,
-					     handler, dev, info, extra_size);
-
-		iwp_compat->pointer = ptr_to_compat(iwp.pointer);
-		iwp_compat->length = iwp.length;
-		iwp_compat->flags = iwp.flags;
-	}
-
-	/* Call commit handler if needed and defined */
-	if (ret == -EIWCOMMIT)
-		ret = call_commit_handler(dev);
-
-	return ret;
-}
-
-int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
-			     unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	struct iw_request_info info;
-	struct iwreq iwr;
-	char *colon;
-	int ret;
-
-	if (copy_from_user(&iwr, argp, sizeof(struct iwreq)))
-		return -EFAULT;
-
-	iwr.ifr_name[IFNAMSIZ-1] = 0;
-	colon = strchr(iwr.ifr_name, ':');
-	if (colon)
-		*colon = 0;
-
-	info.cmd = cmd;
-	info.flags = IW_REQUEST_FLAG_COMPAT;
-
-	ret = wext_ioctl_dispatch(net, (struct ifreq *) &iwr, cmd, &info,
-				  compat_standard_call,
-				  compat_private_call);
-
-	if (ret >= 0 &&
-	    IW_IS_GET(cmd) &&
-	    copy_to_user(argp, &iwr, sizeof(struct iwreq)))
-		return -EFAULT;
-
-	return ret;
-}
-#endif
-
-static int __net_init wext_pernet_init(struct net *net)
-{
-	skb_queue_head_init(&net->wext_nlevents);
-	return 0;
-}
-
-static void __net_exit wext_pernet_exit(struct net *net)
-{
-	skb_queue_purge(&net->wext_nlevents);
-}
-
-static struct pernet_operations wext_pernet_ops = {
-	.init = wext_pernet_init,
-	.exit = wext_pernet_exit,
-};
-
-static int __init wireless_nlevent_init(void)
-{
-	return register_pernet_subsys(&wext_pernet_ops);
-}
-
-subsys_initcall(wireless_nlevent_init);
-
-/* Process events generated by the wireless layer or the driver. */
-static void wireless_nlevent_process(struct work_struct *work)
-{
-	struct sk_buff *skb;
-	struct net *net;
-
-	rtnl_lock();
-
-	for_each_net(net) {
-		while ((skb = skb_dequeue(&net->wext_nlevents)))
-			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
-				    GFP_KERNEL);
-	}
-
-	rtnl_unlock();
-}
-
-static DECLARE_WORK(wireless_nlevent_work, wireless_nlevent_process);
-
-static struct nlmsghdr *rtnetlink_ifinfo_prep(struct net_device *dev,
-					      struct sk_buff *skb)
-{
-	struct ifinfomsg *r;
-	struct nlmsghdr  *nlh;
-
-	nlh = nlmsg_put(skb, 0, 0, RTM_NEWLINK, sizeof(*r), 0);
-	if (!nlh)
-		return NULL;
-
-	r = nlmsg_data(nlh);
-	r->ifi_family = AF_UNSPEC;
-	r->__ifi_pad = 0;
-	r->ifi_type = dev->type;
-	r->ifi_index = dev->ifindex;
-	r->ifi_flags = dev_get_flags(dev);
-	r->ifi_change = 0;	/* Wireless changes don't affect those flags */
-
-	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
-
-	return nlh;
- nla_put_failure:
-	nlmsg_cancel(skb, nlh);
-	return NULL;
-}
-
-
-/*
- * Main event dispatcher. Called from other parts and drivers.
- * Send the event on the appropriate channels.
- * May be called from interrupt context.
- */
-void wireless_send_event(struct net_device *	dev,
-			 unsigned int		cmd,
-			 union iwreq_data *	wrqu,
-			 const char *		extra)
-{
-	const struct iw_ioctl_description *	descr = NULL;
-	int extra_len = 0;
-	struct iw_event  *event;		/* Mallocated whole event */
-	int event_len;				/* Its size */
-	int hdr_len;				/* Size of the event header */
-	int wrqu_off = 0;			/* Offset in wrqu */
-	/* Don't "optimise" the following variable, it will crash */
-	unsigned	cmd_index;		/* *MUST* be unsigned */
-	struct sk_buff *skb;
-	struct nlmsghdr *nlh;
-	struct nlattr *nla;
-#ifdef CONFIG_COMPAT
-	struct __compat_iw_event *compat_event;
-	struct compat_iw_point compat_wrqu;
-	struct sk_buff *compskb;
-#endif
-
-	/*
-	 * Nothing in the kernel sends scan events with data, be safe.
-	 * This is necessary because we cannot fix up scan event data
-	 * for compat, due to being contained in 'extra', but normally
-	 * applications are required to retrieve the scan data anyway
-	 * and no data is included in the event, this codifies that
-	 * practice.
-	 */
-	if (WARN_ON(cmd == SIOCGIWSCAN && extra))
-		extra = NULL;
-
-	/* Get the description of the Event */
-	if (cmd <= SIOCIWLAST) {
-		cmd_index = cmd - SIOCIWFIRST;
-		if (cmd_index < standard_ioctl_num)
-			descr = &(standard_ioctl[cmd_index]);
-	} else {
-		cmd_index = cmd - IWEVFIRST;
-		if (cmd_index < standard_event_num)
-			descr = &(standard_event[cmd_index]);
-	}
-	/* Don't accept unknown events */
-	if (descr == NULL) {
-		/* Note : we don't return an error to the driver, because
-		 * the driver would not know what to do about it. It can't
-		 * return an error to the user, because the event is not
-		 * initiated by a user request.
-		 * The best the driver could do is to log an error message.
-		 * We will do it ourselves instead...
-		 */
-		printk(KERN_ERR "%s (WE) : Invalid/Unknown Wireless Event (0x%04X)\n",
-		       dev->name, cmd);
-		return;
-	}
-
-	/* Check extra parameters and set extra_len */
-	if (descr->header_type == IW_HEADER_TYPE_POINT) {
-		/* Check if number of token fits within bounds */
-		if (wrqu->data.length > descr->max_tokens) {
-			printk(KERN_ERR "%s (WE) : Wireless Event too big (%d)\n", dev->name, wrqu->data.length);
-			return;
-		}
-		if (wrqu->data.length < descr->min_tokens) {
-			printk(KERN_ERR "%s (WE) : Wireless Event too small (%d)\n", dev->name, wrqu->data.length);
-			return;
-		}
-		/* Calculate extra_len - extra is NULL for restricted events */
-		if (extra != NULL)
-			extra_len = wrqu->data.length * descr->token_size;
-		/* Always at an offset in wrqu */
-		wrqu_off = IW_EV_POINT_OFF;
-	}
-
-	/* Total length of the event */
-	hdr_len = event_type_size[descr->header_type];
-	event_len = hdr_len + extra_len;
-
-	/*
-	 * The problem for 64/32 bit.
-	 *
-	 * On 64-bit, a regular event is laid out as follows:
-	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
-	 *      | event.len | event.cmd |     p a d d i n g     |
-	 *      | wrqu data ... (with the correct size)         |
-	 *
-	 * This padding exists because we manipulate event->u,
-	 * and 'event' is not packed.
-	 *
-	 * An iw_point event is laid out like this instead:
-	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
-	 *      | event.len | event.cmd |     p a d d i n g     |
-	 *      | iwpnt.len | iwpnt.flg |     p a d d i n g     |
-	 *      | extra data  ...
-	 *
-	 * The second padding exists because struct iw_point is extended,
-	 * but this depends on the platform...
-	 *
-	 * On 32-bit, all the padding shouldn't be there.
-	 */
-
-	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
-	if (!skb)
-		return;
-
-	/* Send via the RtNetlink event channel */
-	nlh = rtnetlink_ifinfo_prep(dev, skb);
-	if (WARN_ON(!nlh)) {
-		kfree_skb(skb);
-		return;
-	}
-
-	/* Add the wireless events in the netlink packet */
-	nla = nla_reserve(skb, IFLA_WIRELESS, event_len);
-	if (!nla) {
-		kfree_skb(skb);
-		return;
-	}
-	event = nla_data(nla);
-
-	/* Fill event - first clear to avoid data leaking */
-	memset(event, 0, hdr_len);
-	event->len = event_len;
-	event->cmd = cmd;
-	memcpy(&event->u, ((char *) wrqu) + wrqu_off, hdr_len - IW_EV_LCP_LEN);
-	if (extra_len)
-		memcpy(((char *) event) + hdr_len, extra, extra_len);
-
-	nlmsg_end(skb, nlh);
-#ifdef CONFIG_COMPAT
-	hdr_len = compat_event_type_size[descr->header_type];
-	event_len = hdr_len + extra_len;
-
-	compskb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
-	if (!compskb) {
-		kfree_skb(skb);
-		return;
-	}
-
-	/* Send via the RtNetlink event channel */
-	nlh = rtnetlink_ifinfo_prep(dev, compskb);
-	if (WARN_ON(!nlh)) {
-		kfree_skb(skb);
-		kfree_skb(compskb);
-		return;
-	}
-
-	/* Add the wireless events in the netlink packet */
-	nla = nla_reserve(compskb, IFLA_WIRELESS, event_len);
-	if (!nla) {
-		kfree_skb(skb);
-		kfree_skb(compskb);
-		return;
-	}
-	compat_event = nla_data(nla);
-
-	compat_event->len = event_len;
-	compat_event->cmd = cmd;
-	if (descr->header_type == IW_HEADER_TYPE_POINT) {
-		compat_wrqu.length = wrqu->data.length;
-		compat_wrqu.flags = wrqu->data.flags;
-		memcpy(&compat_event->pointer,
-			((char *) &compat_wrqu) + IW_EV_COMPAT_POINT_OFF,
-			hdr_len - IW_EV_COMPAT_LCP_LEN);
-		if (extra_len)
-			memcpy(((char *) compat_event) + hdr_len,
-				extra, extra_len);
-	} else {
-		/* extra_len must be zero, so no if (extra) needed */
-		memcpy(&compat_event->pointer, wrqu,
-			hdr_len - IW_EV_COMPAT_LCP_LEN);
-	}
-
-	nlmsg_end(compskb, nlh);
-
-	skb_shinfo(skb)->frag_list = compskb;
-#endif
-	skb_queue_tail(&dev_net(dev)->wext_nlevents, skb);
-	schedule_work(&wireless_nlevent_work);
-}
-EXPORT_SYMBOL(wireless_send_event);
-
-/********************** ENHANCED IWSPY SUPPORT **********************/
-/*
- * In the old days, the driver was handling spy support all by itself.
- * Now, the driver can delegate this task to Wireless Extensions.
- * It needs to use those standard spy iw_handler in struct iw_handler_def,
- * push data to us via wireless_spy_update() and include struct iw_spy_data
- * in its private part (and export it in net_device->wireless_data->spy_data).
- * One of the main advantage of centralising spy support here is that
- * it becomes much easier to improve and extend it without having to touch
- * the drivers. One example is the addition of the Spy-Threshold events.
- */
-
-/* ---------------------------------------------------------------- */
-/*
- * Return the pointer to the spy data in the driver.
- * Because this is called on the Rx path via wireless_spy_update(),
- * we want it to be efficient...
- */
-static inline struct iw_spy_data *get_spydata(struct net_device *dev)
-{
-	/* This is the new way */
-	if (dev->wireless_data)
-		return dev->wireless_data->spy_data;
-	return NULL;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : set Spy List
- */
-int iw_handler_set_spy(struct net_device *	dev,
-		       struct iw_request_info *	info,
-		       union iwreq_data *	wrqu,
-		       char *			extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct sockaddr *	address = (struct sockaddr *) extra;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	/* Disable spy collection while we copy the addresses.
-	 * While we copy addresses, any call to wireless_spy_update()
-	 * will NOP. This is OK, as anyway the addresses are changing. */
-	spydata->spy_number = 0;
-
-	/* We want to operate without locking, because wireless_spy_update()
-	 * most likely will happen in the interrupt handler, and therefore
-	 * have its own locking constraints and needs performance.
-	 * The rtnl_lock() make sure we don't race with the other iw_handlers.
-	 * This make sure wireless_spy_update() "see" that the spy list
-	 * is temporarily disabled. */
-	smp_wmb();
-
-	/* Are there are addresses to copy? */
-	if (wrqu->data.length > 0) {
-		int i;
-
-		/* Copy addresses */
-		for (i = 0; i < wrqu->data.length; i++)
-			memcpy(spydata->spy_address[i], address[i].sa_data,
-			       ETH_ALEN);
-		/* Reset stats */
-		memset(spydata->spy_stat, 0,
-		       sizeof(struct iw_quality) * IW_MAX_SPY);
-	}
-
-	/* Make sure above is updated before re-enabling */
-	smp_wmb();
-
-	/* Enable addresses */
-	spydata->spy_number = wrqu->data.length;
-
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_set_spy);
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : get Spy List
- */
-int iw_handler_get_spy(struct net_device *	dev,
-		       struct iw_request_info *	info,
-		       union iwreq_data *	wrqu,
-		       char *			extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct sockaddr *	address = (struct sockaddr *) extra;
-	int			i;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	wrqu->data.length = spydata->spy_number;
-
-	/* Copy addresses. */
-	for (i = 0; i < spydata->spy_number; i++) 	{
-		memcpy(address[i].sa_data, spydata->spy_address[i], ETH_ALEN);
-		address[i].sa_family = AF_UNIX;
-	}
-	/* Copy stats to the user buffer (just after). */
-	if (spydata->spy_number > 0)
-		memcpy(extra  + (sizeof(struct sockaddr) *spydata->spy_number),
-		       spydata->spy_stat,
-		       sizeof(struct iw_quality) * spydata->spy_number);
-	/* Reset updated flags. */
-	for (i = 0; i < spydata->spy_number; i++)
-		spydata->spy_stat[i].updated &= ~IW_QUAL_ALL_UPDATED;
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_get_spy);
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : set spy threshold
- */
-int iw_handler_set_thrspy(struct net_device *	dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *	wrqu,
-			  char *		extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	/* Just do it */
-	memcpy(&(spydata->spy_thr_low), &(threshold->low),
-	       2 * sizeof(struct iw_quality));
-
-	/* Clear flag */
-	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
-
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_set_thrspy);
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : get spy threshold
- */
-int iw_handler_get_thrspy(struct net_device *	dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *	wrqu,
-			  char *		extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	/* Just do it */
-	memcpy(&(threshold->low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
-
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_get_thrspy);
-
-/*------------------------------------------------------------------*/
-/*
- * Prepare and send a Spy Threshold event
- */
-static void iw_send_thrspy_event(struct net_device *	dev,
-				 struct iw_spy_data *	spydata,
-				 unsigned char *	address,
-				 struct iw_quality *	wstats)
-{
-	union iwreq_data	wrqu;
-	struct iw_thrspy	threshold;
-
-	/* Init */
-	wrqu.data.length = 1;
-	wrqu.data.flags = 0;
-	/* Copy address */
-	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
-	threshold.addr.sa_family = ARPHRD_ETHER;
-	/* Copy stats */
-	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
-	/* Copy also thresholds */
-	memcpy(&(threshold.low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
-
-	/* Send event to user space */
-	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Call for the driver to update the spy data.
- * For now, the spy data is a simple array. As the size of the array is
- * small, this is good enough. If we wanted to support larger number of
- * spy addresses, we should use something more efficient...
- */
-void wireless_spy_update(struct net_device *	dev,
-			 unsigned char *	address,
-			 struct iw_quality *	wstats)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	int			i;
-	int			match = -1;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return;
-
-	/* Update all records that match */
-	for (i = 0; i < spydata->spy_number; i++)
-		if (!compare_ether_addr(address, spydata->spy_address[i])) {
-			memcpy(&(spydata->spy_stat[i]), wstats,
-			       sizeof(struct iw_quality));
-			match = i;
-		}
-
-	/* Generate an event if we cross the spy threshold.
-	 * To avoid event storms, we have a simple hysteresis : we generate
-	 * event only when we go under the low threshold or above the
-	 * high threshold. */
-	if (match >= 0) {
-		if (spydata->spy_thr_under[match]) {
-			if (wstats->level > spydata->spy_thr_high.level) {
-				spydata->spy_thr_under[match] = 0;
-				iw_send_thrspy_event(dev, spydata,
-						     address, wstats);
-			}
-		} else {
-			if (wstats->level < spydata->spy_thr_low.level) {
-				spydata->spy_thr_under[match] = 1;
-				iw_send_thrspy_event(dev, spydata,
-						     address, wstats);
-			}
-		}
-	}
-}
-EXPORT_SYMBOL(wireless_spy_update);
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 7fa9c7a..e3219e4 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -415,6 +415,7 @@
 	struct sock *sk = sock->sk;
 	int rc = -ENOPROTOOPT;
 
+	lock_kernel();
 	if (level != SOL_X25 || optname != X25_QBITINCL)
 		goto out;
 
@@ -429,6 +430,7 @@
 	x25_sk(sk)->qbitincl = !!opt;
 	rc = 0;
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -438,6 +440,7 @@
 	struct sock *sk = sock->sk;
 	int val, len, rc = -ENOPROTOOPT;
 
+	lock_kernel();
 	if (level != SOL_X25 || optname != X25_QBITINCL)
 		goto out;
 
@@ -458,6 +461,7 @@
 	val = x25_sk(sk)->qbitincl;
 	rc = copy_to_user(optval, &val, len) ? -EFAULT : 0;
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -466,12 +470,14 @@
 	struct sock *sk = sock->sk;
 	int rc = -EOPNOTSUPP;
 
+	lock_kernel();
 	if (sk->sk_state != TCP_LISTEN) {
 		memset(&x25_sk(sk)->dest_addr, 0, X25_ADDR_LEN);
 		sk->sk_max_ack_backlog = backlog;
 		sk->sk_state           = TCP_LISTEN;
 		rc = 0;
 	}
+	unlock_kernel();
 
 	return rc;
 }
@@ -501,13 +507,14 @@
 	return sk;
 }
 
-static int x25_create(struct net *net, struct socket *sock, int protocol)
+static int x25_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	struct sock *sk;
 	struct x25_sock *x25;
 	int rc = -ESOCKTNOSUPPORT;
 
-	if (net != &init_net)
+	if (!net_eq(net, &init_net))
 		return -EAFNOSUPPORT;
 
 	if (sock->type != SOCK_SEQPACKET || protocol)
@@ -597,6 +604,7 @@
 	struct sock *sk = sock->sk;
 	struct x25_sock *x25;
 
+	lock_kernel();
 	if (!sk)
 		goto out;
 
@@ -627,6 +635,7 @@
 
 	sock_orphan(sk);
 out:
+	unlock_kernel();
 	return 0;
 }
 
@@ -634,18 +643,23 @@
 {
 	struct sock *sk = sock->sk;
 	struct sockaddr_x25 *addr = (struct sockaddr_x25 *)uaddr;
+	int rc = 0;
 
+	lock_kernel();
 	if (!sock_flag(sk, SOCK_ZAPPED) ||
 	    addr_len != sizeof(struct sockaddr_x25) ||
-	    addr->sx25_family != AF_X25)
-		return -EINVAL;
+	    addr->sx25_family != AF_X25) {
+		rc = -EINVAL;
+		goto out;
+	}
 
 	x25_sk(sk)->source_addr = addr->sx25_addr;
 	x25_insert_socket(sk);
 	sock_reset_flag(sk, SOCK_ZAPPED);
 	SOCK_DEBUG(sk, "x25_bind: socket is bound\n");
-
-	return 0;
+out:
+	unlock_kernel();
+	return rc;
 }
 
 static int x25_wait_for_connection_establishment(struct sock *sk)
@@ -686,6 +700,7 @@
 	struct x25_route *rt;
 	int rc = 0;
 
+	lock_kernel();
 	lock_sock(sk);
 	if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) {
 		sock->state = SS_CONNECTED;
@@ -763,6 +778,7 @@
 	x25_route_put(rt);
 out:
 	release_sock(sk);
+	unlock_kernel();
 	return rc;
 }
 
@@ -802,6 +818,7 @@
 	struct sk_buff *skb;
 	int rc = -EINVAL;
 
+	lock_kernel();
 	if (!sk || sk->sk_state != TCP_LISTEN)
 		goto out;
 
@@ -829,6 +846,7 @@
 out2:
 	release_sock(sk);
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -838,10 +856,14 @@
 	struct sockaddr_x25 *sx25 = (struct sockaddr_x25 *)uaddr;
 	struct sock *sk = sock->sk;
 	struct x25_sock *x25 = x25_sk(sk);
+	int rc = 0;
 
+	lock_kernel();
 	if (peer) {
-		if (sk->sk_state != TCP_ESTABLISHED)
-			return -ENOTCONN;
+		if (sk->sk_state != TCP_ESTABLISHED) {
+			rc = -ENOTCONN;
+			goto out;
+		}
 		sx25->sx25_addr = x25->dest_addr;
 	} else
 		sx25->sx25_addr = x25->source_addr;
@@ -849,7 +871,21 @@
 	sx25->sx25_family = AF_X25;
 	*uaddr_len = sizeof(*sx25);
 
-	return 0;
+out:
+	unlock_kernel();
+	return rc;
+}
+
+static unsigned int x25_datagram_poll(struct file *file, struct socket *sock,
+			   poll_table *wait)
+{
+	int rc;
+
+	lock_kernel();
+	rc = datagram_poll(file, sock, wait);
+	unlock_kernel();
+
+	return rc;
 }
 
 int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
@@ -1002,6 +1038,7 @@
 	size_t size;
 	int qbit = 0, rc = -EINVAL;
 
+	lock_kernel();
 	if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_OOB|MSG_EOR|MSG_CMSG_COMPAT))
 		goto out;
 
@@ -1166,6 +1203,7 @@
 	release_sock(sk);
 	rc = len;
 out:
+	unlock_kernel();
 	return rc;
 out_kfree_skb:
 	kfree_skb(skb);
@@ -1186,6 +1224,7 @@
 	unsigned char *asmptr;
 	int rc = -ENOTCONN;
 
+	lock_kernel();
 	/*
 	 * This works for seqpacket too. The receiver has ordered the queue for
 	 * us! We do one quick check first though
@@ -1259,6 +1298,7 @@
 out_free_dgram:
 	skb_free_datagram(sk, skb);
 out:
+	unlock_kernel();
 	return rc;
 }
 
@@ -1270,6 +1310,7 @@
 	void __user *argp = (void __user *)arg;
 	int rc;
 
+	lock_kernel();
 	switch (cmd) {
 		case TIOCOUTQ: {
 			int amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
@@ -1363,7 +1404,7 @@
 			    facilities.throughput > 0xDD)
 				break;
 			if (facilities.reverse &&
-				(facilities.reverse | 0x81)!= 0x81)
+				(facilities.reverse & 0x81) != 0x81)
 				break;
 			x25->facilities = facilities;
 			rc = 0;
@@ -1430,6 +1471,17 @@
 			break;
 		}
 
+		case SIOCX25SCAUSEDIAG: {
+			struct x25_causediag causediag;
+			rc = -EFAULT;
+			if (copy_from_user(&causediag, argp, sizeof(causediag)))
+				break;
+			x25->causediag = causediag;
+			rc = 0;
+			break;
+
+		}
+
 		case SIOCX25SCUDMATCHLEN: {
 			struct x25_subaddr sub_addr;
 			rc = -EINVAL;
@@ -1472,11 +1524,12 @@
 			rc = -ENOIOCTLCMD;
 			break;
 	}
+	unlock_kernel();
 
 	return rc;
 }
 
-static struct net_proto_family x25_family_ops = {
+static const struct net_proto_family x25_family_ops = {
 	.family =	AF_X25,
 	.create =	x25_create,
 	.owner	=	THIS_MODULE,
@@ -1542,15 +1595,19 @@
 		break;
 	case SIOCGSTAMP:
 		rc = -EINVAL;
+		lock_kernel();
 		if (sk)
 			rc = compat_sock_get_timestamp(sk,
 					(struct timeval __user*)argp);
+		unlock_kernel();
 		break;
 	case SIOCGSTAMPNS:
 		rc = -EINVAL;
+		lock_kernel();
 		if (sk)
 			rc = compat_sock_get_timestampns(sk,
 					(struct timespec __user*)argp);
+		unlock_kernel();
 		break;
 	case SIOCGIFADDR:
 	case SIOCSIFADDR:
@@ -1569,16 +1626,22 @@
 		rc = -EPERM;
 		if (!capable(CAP_NET_ADMIN))
 			break;
+		lock_kernel();
 		rc = x25_route_ioctl(cmd, argp);
+		unlock_kernel();
 		break;
 	case SIOCX25GSUBSCRIP:
+		lock_kernel();
 		rc = compat_x25_subscr_ioctl(cmd, argp);
+		unlock_kernel();
 		break;
 	case SIOCX25SSUBSCRIP:
 		rc = -EPERM;
 		if (!capable(CAP_NET_ADMIN))
 			break;
+		lock_kernel();
 		rc = compat_x25_subscr_ioctl(cmd, argp);
+		unlock_kernel();
 		break;
 	case SIOCX25GFACILITIES:
 	case SIOCX25SFACILITIES:
@@ -1587,6 +1650,7 @@
 	case SIOCX25GCALLUSERDATA:
 	case SIOCX25SCALLUSERDATA:
 	case SIOCX25GCAUSEDIAG:
+	case SIOCX25SCAUSEDIAG:
 	case SIOCX25SCUDMATCHLEN:
 	case SIOCX25CALLACCPTAPPRV:
 	case SIOCX25SENDCALLACCPT:
@@ -1600,7 +1664,7 @@
 }
 #endif
 
-static const struct proto_ops SOCKOPS_WRAPPED(x25_proto_ops) = {
+static const struct proto_ops x25_proto_ops = {
 	.family =	AF_X25,
 	.owner =	THIS_MODULE,
 	.release =	x25_release,
@@ -1609,7 +1673,7 @@
 	.socketpair =	sock_no_socketpair,
 	.accept =	x25_accept,
 	.getname =	x25_getname,
-	.poll =		datagram_poll,
+	.poll =		x25_datagram_poll,
 	.ioctl =	x25_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl = compat_x25_ioctl,
@@ -1624,8 +1688,6 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-SOCKOPS_WRAP(x25_proto, AF_X25);
-
 static struct packet_type x25_packet_type __read_mostly = {
 	.type =	cpu_to_be16(ETH_P_X25),
 	.func =	x25_lapb_receive_frame,
@@ -1659,20 +1721,31 @@
 	if (rc != 0)
 		goto out;
 
-	sock_register(&x25_family_ops);
+	rc = sock_register(&x25_family_ops);
+	if (rc != 0)
+		goto out_proto;
 
 	dev_add_pack(&x25_packet_type);
 
-	register_netdevice_notifier(&x25_dev_notifier);
+	rc = register_netdevice_notifier(&x25_dev_notifier);
+	if (rc != 0)
+		goto out_sock;
 
 	printk(KERN_INFO "X.25 for Linux Version 0.2\n");
 
-#ifdef CONFIG_SYSCTL
 	x25_register_sysctl();
-#endif
-	x25_proc_init();
+	rc = x25_proc_init();
+	if (rc != 0)
+		goto out_dev;
 out:
 	return rc;
+out_dev:
+	unregister_netdevice_notifier(&x25_dev_notifier);
+out_sock:
+	sock_unregister(AF_X25);
+out_proto:
+	proto_unregister(&x25_proto);
+	goto out;
 }
 module_init(x25_init);
 
@@ -1682,9 +1755,7 @@
 	x25_link_free();
 	x25_route_free();
 
-#ifdef CONFIG_SYSCTL
 	x25_unregister_sysctl();
-#endif
 
 	unregister_netdevice_notifier(&x25_dev_notifier);
 
diff --git a/net/x25/sysctl_net_x25.c b/net/x25/sysctl_net_x25.c
index a5d3416..d2efd29 100644
--- a/net/x25/sysctl_net_x25.c
+++ b/net/x25/sysctl_net_x25.c
@@ -19,62 +19,51 @@
 
 static struct ctl_table x25_table[] = {
 	{
-		.ctl_name =	NET_X25_RESTART_REQUEST_TIMEOUT,
 		.procname =	"restart_request_timeout",
 		.data =		&sysctl_x25_restart_request_timeout,
 		.maxlen =	sizeof(int),
 		.mode =		0644,
 		.proc_handler =	proc_dointvec_minmax,
-		.strategy =	sysctl_intvec,
 		.extra1 =	&min_timer,
 		.extra2 =	&max_timer,
 	},
 	{
-		.ctl_name =	NET_X25_CALL_REQUEST_TIMEOUT,
 		.procname =	"call_request_timeout",
 		.data =		&sysctl_x25_call_request_timeout,
 		.maxlen =	sizeof(int),
 		.mode =		0644,
 		.proc_handler =	proc_dointvec_minmax,
-		.strategy =	sysctl_intvec,
 		.extra1 =	&min_timer,
 		.extra2 =	&max_timer,
 	},
 	{
-		.ctl_name =	NET_X25_RESET_REQUEST_TIMEOUT,
 		.procname =	"reset_request_timeout",
 		.data =		&sysctl_x25_reset_request_timeout,
 		.maxlen =	sizeof(int),
 		.mode =		0644,
 		.proc_handler =	proc_dointvec_minmax,
-		.strategy =	sysctl_intvec,
 		.extra1 =	&min_timer,
 		.extra2 =	&max_timer,
 	},
 	{
-		.ctl_name =	NET_X25_CLEAR_REQUEST_TIMEOUT,
 		.procname =	"clear_request_timeout",
 		.data =		&sysctl_x25_clear_request_timeout,
 		.maxlen =	sizeof(int),
 		.mode =		0644,
 		.proc_handler =	proc_dointvec_minmax,
-		.strategy =	sysctl_intvec,
 		.extra1 =	&min_timer,
 		.extra2 =	&max_timer,
 	},
 	{
-		.ctl_name =	NET_X25_ACK_HOLD_BACK_TIMEOUT,
 		.procname =	"acknowledgement_hold_back_timeout",
 		.data =		&sysctl_x25_ack_holdback_timeout,
 		.maxlen =	sizeof(int),
 		.mode =		0644,
 		.proc_handler =	proc_dointvec_minmax,
-		.strategy =	sysctl_intvec,
 		.extra1 =	&min_timer,
 		.extra2 =	&max_timer,
 	},
 	{
-		.ctl_name =	NET_X25_FORWARD,
 		.procname =	"x25_forward",
 		.data = 	&sysctl_x25_forward,
 		.maxlen = 	sizeof(int),
@@ -85,8 +74,8 @@
 };
 
 static struct ctl_path x25_path[] = {
-	{ .procname = "net", .ctl_name = CTL_NET, },
-	{ .procname = "x25", .ctl_name = NET_X25, },
+	{ .procname = "net", },
+	{ .procname = "x25", },
 	{ }
 };
 
diff --git a/net/x25/x25_in.c b/net/x25/x25_in.c
index 7d7c3ab..96d9227 100644
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -114,7 +114,7 @@
 			/*
 			 *	Copy any Call User Data.
 			 */
-			if (skb->len >= 0) {
+			if (skb->len > 0) {
 				skb_copy_from_linear_data(skb,
 					      x25->calluserdata.cuddata,
 					      skb->len);
diff --git a/net/x25/x25_route.c b/net/x25/x25_route.c
index 2c999cc..b95fae9 100644
--- a/net/x25/x25_route.c
+++ b/net/x25/x25_route.c
@@ -136,8 +136,10 @@
 #if defined(CONFIG_LLC) || defined(CONFIG_LLC_MODULE)
 					&& dev->type != ARPHRD_ETHER
 #endif
-					)))
+					))){
 		dev_put(dev);
+		dev = NULL;
+	}
 
 	return dev;
 }
@@ -190,7 +192,7 @@
 		goto out;
 
 	rc = -EINVAL;
-	if (rt.sigdigits < 0 || rt.sigdigits > 15)
+	if (rt.sigdigits > 15)
 		goto out;
 
 	dev = x25_dev_get(rt.device);
diff --git a/net/x25/x25_subr.c b/net/x25/x25_subr.c
index 511a598..352b32d 100644
--- a/net/x25/x25_subr.c
+++ b/net/x25/x25_subr.c
@@ -225,6 +225,12 @@
 			break;
 
 		case X25_CLEAR_REQUEST:
+			dptr    = skb_put(skb, 3);
+			*dptr++ = frametype;
+			*dptr++ = x25->causediag.cause;
+			*dptr++ = x25->causediag.diagnostic;
+			break;
+
 		case X25_RESET_REQUEST:
 			dptr    = skb_put(skb, 3);
 			*dptr++ = frametype;
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index faf54c6..743c013 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -200,6 +200,40 @@
 	}
 },
 {
+	.name = "hmac(sha384)",
+
+	.uinfo = {
+		.auth = {
+			.icv_truncbits = 192,
+			.icv_fullbits = 384,
+		}
+	},
+
+	.desc = {
+		.sadb_alg_id = SADB_X_AALG_SHA2_384HMAC,
+		.sadb_alg_ivlen = 0,
+		.sadb_alg_minbits = 384,
+		.sadb_alg_maxbits = 384
+	}
+},
+{
+	.name = "hmac(sha512)",
+
+	.uinfo = {
+		.auth = {
+			.icv_truncbits = 256,
+			.icv_fullbits = 512,
+		}
+	},
+
+	.desc = {
+		.sadb_alg_id = SADB_X_AALG_SHA2_512HMAC,
+		.sadb_alg_ivlen = 0,
+		.sadb_alg_minbits = 512,
+		.sadb_alg_maxbits = 512
+	}
+},
+{
 	.name = "hmac(rmd160)",
 	.compat = "rmd160",
 
@@ -365,6 +399,7 @@
 },
 {
 	.name = "cbc(camellia)",
+	.compat = "camellia",
 
 	.uinfo = {
 		.encr = {
@@ -689,84 +724,6 @@
 }
 EXPORT_SYMBOL_GPL(xfrm_count_enc_supported);
 
-/* Move to common area: it is shared with AH. */
-
-int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
-		 int offset, int len, icv_update_fn_t icv_update)
-{
-	int start = skb_headlen(skb);
-	int i, copy = start - offset;
-	struct sk_buff *frag_iter;
-	struct scatterlist sg;
-	int err;
-
-	/* Checksum header. */
-	if (copy > 0) {
-		if (copy > len)
-			copy = len;
-
-		sg_init_one(&sg, skb->data + offset, copy);
-
-		err = icv_update(desc, &sg, copy);
-		if (unlikely(err))
-			return err;
-
-		if ((len -= copy) == 0)
-			return 0;
-		offset += copy;
-	}
-
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-		int end;
-
-		WARN_ON(start > offset + len);
-
-		end = start + skb_shinfo(skb)->frags[i].size;
-		if ((copy = end - offset) > 0) {
-			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
-			if (copy > len)
-				copy = len;
-
-			sg_init_table(&sg, 1);
-			sg_set_page(&sg, frag->page, copy,
-				    frag->page_offset + offset-start);
-
-			err = icv_update(desc, &sg, copy);
-			if (unlikely(err))
-				return err;
-
-			if (!(len -= copy))
-				return 0;
-			offset += copy;
-		}
-		start = end;
-	}
-
-	skb_walk_frags(skb, frag_iter) {
-		int end;
-
-		WARN_ON(start > offset + len);
-
-		end = start + frag_iter->len;
-		if ((copy = end - offset) > 0) {
-			if (copy > len)
-				copy = len;
-			err = skb_icv_walk(frag_iter, desc, offset-start,
-					   copy, icv_update);
-			if (unlikely(err))
-				return err;
-			if ((len -= copy) == 0)
-				return 0;
-			offset += copy;
-		}
-		start = end;
-	}
-	BUG_ON(len);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(skb_icv_walk);
-
 #if defined(CONFIG_INET_ESP) || defined(CONFIG_INET_ESP_MODULE) || defined(CONFIG_INET6_ESP) || defined(CONFIG_INET6_ESP_MODULE)
 
 void *pskb_put(struct sk_buff *skb, struct sk_buff *tail, int len)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index f2f7c63..d847f1a 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -21,6 +21,9 @@
 #include <linux/cache.h>
 #include <linux/audit.h>
 #include <asm/uaccess.h>
+#include <linux/ktime.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 
 #include "xfrm_hash.h"
 
@@ -352,7 +355,7 @@
 
 static void xfrm_state_gc_destroy(struct xfrm_state *x)
 {
-	del_timer_sync(&x->timer);
+	tasklet_hrtimer_cancel(&x->mtimer);
 	del_timer_sync(&x->rtimer);
 	kfree(x->aalg);
 	kfree(x->ealg);
@@ -398,9 +401,10 @@
 		return secs*HZ;
 }
 
-static void xfrm_timer_handler(unsigned long data)
+static enum hrtimer_restart xfrm_timer_handler(struct hrtimer * me)
 {
-	struct xfrm_state *x = (struct xfrm_state*)data;
+	struct tasklet_hrtimer *thr = container_of(me, struct tasklet_hrtimer, timer);
+	struct xfrm_state *x = container_of(thr, struct xfrm_state, mtimer);
 	struct net *net = xs_net(x);
 	unsigned long now = get_seconds();
 	long next = LONG_MAX;
@@ -451,8 +455,9 @@
 	if (warn)
 		km_state_expired(x, 0, 0);
 resched:
-	if (next != LONG_MAX)
-		mod_timer(&x->timer, jiffies + make_jiffies(next));
+	if (next != LONG_MAX){
+		tasklet_hrtimer_start(&x->mtimer, ktime_set(next, 0), HRTIMER_MODE_REL);
+	}
 
 	goto out;
 
@@ -474,6 +479,7 @@
 
 out:
 	spin_unlock(&x->lock);
+	return HRTIMER_NORESTART;
 }
 
 static void xfrm_replay_timer_handler(unsigned long data);
@@ -492,7 +498,7 @@
 		INIT_HLIST_NODE(&x->bydst);
 		INIT_HLIST_NODE(&x->bysrc);
 		INIT_HLIST_NODE(&x->byspi);
-		setup_timer(&x->timer, xfrm_timer_handler, (unsigned long)x);
+		tasklet_hrtimer_init(&x->mtimer, xfrm_timer_handler, CLOCK_REALTIME, HRTIMER_MODE_ABS);
 		setup_timer(&x->rtimer, xfrm_replay_timer_handler,
 				(unsigned long)x);
 		x->curlft.add_time = get_seconds();
@@ -843,8 +849,7 @@
 				hlist_add_head(&x->byspi, net->xfrm.state_byspi+h);
 			}
 			x->lft.hard_add_expires_seconds = net->xfrm.sysctl_acq_expires;
-			x->timer.expires = jiffies + net->xfrm.sysctl_acq_expires*HZ;
-			add_timer(&x->timer);
+			tasklet_hrtimer_start(&x->mtimer, ktime_set(net->xfrm.sysctl_acq_expires, 0), HRTIMER_MODE_REL);
 			net->xfrm.state_num++;
 			xfrm_hash_grow_check(net, x->bydst.next != NULL);
 		} else {
@@ -921,7 +926,7 @@
 		hlist_add_head(&x->byspi, net->xfrm.state_byspi+h);
 	}
 
-	mod_timer(&x->timer, jiffies + HZ);
+	tasklet_hrtimer_start(&x->mtimer, ktime_set(1, 0), HRTIMER_MODE_REL);
 	if (x->replay_maxage)
 		mod_timer(&x->rtimer, jiffies + x->replay_maxage);
 
@@ -1019,8 +1024,7 @@
 		x->props.reqid = reqid;
 		x->lft.hard_add_expires_seconds = net->xfrm.sysctl_acq_expires;
 		xfrm_state_hold(x);
-		x->timer.expires = jiffies + net->xfrm.sysctl_acq_expires*HZ;
-		add_timer(&x->timer);
+		tasklet_hrtimer_start(&x->mtimer, ktime_set(net->xfrm.sysctl_acq_expires, 0), HRTIMER_MODE_REL);
 		list_add(&x->km.all, &net->xfrm.state_all);
 		hlist_add_head(&x->bydst, net->xfrm.state_bydst+h);
 		h = xfrm_src_hash(net, daddr, saddr, family);
@@ -1110,7 +1114,7 @@
 	x->props.saddr = orig->props.saddr;
 
 	if (orig->aalg) {
-		x->aalg = xfrm_algo_clone(orig->aalg);
+		x->aalg = xfrm_algo_auth_clone(orig->aalg);
 		if (!x->aalg)
 			goto error;
 	}
@@ -1300,7 +1304,7 @@
 		memcpy(&x1->lft, &x->lft, sizeof(x1->lft));
 		x1->km.dying = 0;
 
-		mod_timer(&x1->timer, jiffies + HZ);
+		tasklet_hrtimer_start(&x1->mtimer, ktime_set(1, 0), HRTIMER_MODE_REL);
 		if (x1->curlft.use_time)
 			xfrm_state_check_expire(x1);
 
@@ -1325,7 +1329,7 @@
 	if (x->curlft.bytes >= x->lft.hard_byte_limit ||
 	    x->curlft.packets >= x->lft.hard_packet_limit) {
 		x->km.state = XFRM_STATE_EXPIRED;
-		mod_timer(&x->timer, jiffies);
+		tasklet_hrtimer_start(&x->mtimer, ktime_set(0,0), HRTIMER_MODE_REL);
 		return -EINVAL;
 	}
 
diff --git a/net/xfrm/xfrm_sysctl.c b/net/xfrm/xfrm_sysctl.c
index 2e6ffb6..2e221f2 100644
--- a/net/xfrm/xfrm_sysctl.c
+++ b/net/xfrm/xfrm_sysctl.c
@@ -13,28 +13,24 @@
 #ifdef CONFIG_SYSCTL
 static struct ctl_table xfrm_table[] = {
 	{
-		.ctl_name	= NET_CORE_AEVENT_ETIME,
 		.procname	= "xfrm_aevent_etime",
 		.maxlen		= sizeof(u32),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= NET_CORE_AEVENT_RSEQTH,
 		.procname	= "xfrm_aevent_rseqth",
 		.maxlen		= sizeof(u32),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "xfrm_larval_drop",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "xfrm_acq_expires",
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index b95a2d6..1ada618 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -62,6 +62,22 @@
 	return 0;
 }
 
+static int verify_auth_trunc(struct nlattr **attrs)
+{
+	struct nlattr *rt = attrs[XFRMA_ALG_AUTH_TRUNC];
+	struct xfrm_algo_auth *algp;
+
+	if (!rt)
+		return 0;
+
+	algp = nla_data(rt);
+	if (nla_len(rt) < xfrm_alg_auth_len(algp))
+		return -EINVAL;
+
+	algp->alg_name[CRYPTO_MAX_ALG_NAME - 1] = '\0';
+	return 0;
+}
+
 static int verify_aead(struct nlattr **attrs)
 {
 	struct nlattr *rt = attrs[XFRMA_ALG_AEAD];
@@ -128,7 +144,8 @@
 	err = -EINVAL;
 	switch (p->id.proto) {
 	case IPPROTO_AH:
-		if (!attrs[XFRMA_ALG_AUTH]	||
+		if ((!attrs[XFRMA_ALG_AUTH]	&&
+		     !attrs[XFRMA_ALG_AUTH_TRUNC]) ||
 		    attrs[XFRMA_ALG_AEAD]	||
 		    attrs[XFRMA_ALG_CRYPT]	||
 		    attrs[XFRMA_ALG_COMP])
@@ -139,10 +156,12 @@
 		if (attrs[XFRMA_ALG_COMP])
 			goto out;
 		if (!attrs[XFRMA_ALG_AUTH] &&
+		    !attrs[XFRMA_ALG_AUTH_TRUNC] &&
 		    !attrs[XFRMA_ALG_CRYPT] &&
 		    !attrs[XFRMA_ALG_AEAD])
 			goto out;
 		if ((attrs[XFRMA_ALG_AUTH] ||
+		     attrs[XFRMA_ALG_AUTH_TRUNC] ||
 		     attrs[XFRMA_ALG_CRYPT]) &&
 		    attrs[XFRMA_ALG_AEAD])
 			goto out;
@@ -152,6 +171,7 @@
 		if (!attrs[XFRMA_ALG_COMP]	||
 		    attrs[XFRMA_ALG_AEAD]	||
 		    attrs[XFRMA_ALG_AUTH]	||
+		    attrs[XFRMA_ALG_AUTH_TRUNC]	||
 		    attrs[XFRMA_ALG_CRYPT])
 			goto out;
 		break;
@@ -161,6 +181,7 @@
 	case IPPROTO_ROUTING:
 		if (attrs[XFRMA_ALG_COMP]	||
 		    attrs[XFRMA_ALG_AUTH]	||
+		    attrs[XFRMA_ALG_AUTH_TRUNC]	||
 		    attrs[XFRMA_ALG_AEAD]	||
 		    attrs[XFRMA_ALG_CRYPT]	||
 		    attrs[XFRMA_ENCAP]		||
@@ -176,6 +197,8 @@
 
 	if ((err = verify_aead(attrs)))
 		goto out;
+	if ((err = verify_auth_trunc(attrs)))
+		goto out;
 	if ((err = verify_one_alg(attrs, XFRMA_ALG_AUTH)))
 		goto out;
 	if ((err = verify_one_alg(attrs, XFRMA_ALG_CRYPT)))
@@ -229,6 +252,66 @@
 	return 0;
 }
 
+static int attach_auth(struct xfrm_algo_auth **algpp, u8 *props,
+		       struct nlattr *rta)
+{
+	struct xfrm_algo *ualg;
+	struct xfrm_algo_auth *p;
+	struct xfrm_algo_desc *algo;
+
+	if (!rta)
+		return 0;
+
+	ualg = nla_data(rta);
+
+	algo = xfrm_aalg_get_byname(ualg->alg_name, 1);
+	if (!algo)
+		return -ENOSYS;
+	*props = algo->desc.sadb_alg_id;
+
+	p = kmalloc(sizeof(*p) + (ualg->alg_key_len + 7) / 8, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	strcpy(p->alg_name, algo->name);
+	p->alg_key_len = ualg->alg_key_len;
+	p->alg_trunc_len = algo->uinfo.auth.icv_truncbits;
+	memcpy(p->alg_key, ualg->alg_key, (ualg->alg_key_len + 7) / 8);
+
+	*algpp = p;
+	return 0;
+}
+
+static int attach_auth_trunc(struct xfrm_algo_auth **algpp, u8 *props,
+			     struct nlattr *rta)
+{
+	struct xfrm_algo_auth *p, *ualg;
+	struct xfrm_algo_desc *algo;
+
+	if (!rta)
+		return 0;
+
+	ualg = nla_data(rta);
+
+	algo = xfrm_aalg_get_byname(ualg->alg_name, 1);
+	if (!algo)
+		return -ENOSYS;
+	if (ualg->alg_trunc_len > algo->uinfo.auth.icv_fullbits)
+		return -EINVAL;
+	*props = algo->desc.sadb_alg_id;
+
+	p = kmemdup(ualg, xfrm_alg_auth_len(ualg), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	strcpy(p->alg_name, algo->name);
+	if (!p->alg_trunc_len)
+		p->alg_trunc_len = algo->uinfo.auth.icv_truncbits;
+
+	*algpp = p;
+	return 0;
+}
+
 static int attach_aead(struct xfrm_algo_aead **algpp, u8 *props,
 		       struct nlattr *rta)
 {
@@ -332,10 +415,14 @@
 	if ((err = attach_aead(&x->aead, &x->props.ealgo,
 			       attrs[XFRMA_ALG_AEAD])))
 		goto error;
-	if ((err = attach_one_algo(&x->aalg, &x->props.aalgo,
-				   xfrm_aalg_get_byname,
-				   attrs[XFRMA_ALG_AUTH])))
+	if ((err = attach_auth_trunc(&x->aalg, &x->props.aalgo,
+				     attrs[XFRMA_ALG_AUTH_TRUNC])))
 		goto error;
+	if (!x->props.aalgo) {
+		if ((err = attach_auth(&x->aalg, &x->props.aalgo,
+				       attrs[XFRMA_ALG_AUTH])))
+			goto error;
+	}
 	if ((err = attach_one_algo(&x->ealg, &x->props.ealgo,
 				   xfrm_ealg_get_byname,
 				   attrs[XFRMA_ALG_CRYPT])))
@@ -548,6 +635,24 @@
 	return 0;
 }
 
+static int copy_to_user_auth(struct xfrm_algo_auth *auth, struct sk_buff *skb)
+{
+	struct xfrm_algo *algo;
+	struct nlattr *nla;
+
+	nla = nla_reserve(skb, XFRMA_ALG_AUTH,
+			  sizeof(*algo) + (auth->alg_key_len + 7) / 8);
+	if (!nla)
+		return -EMSGSIZE;
+
+	algo = nla_data(nla);
+	strcpy(algo->alg_name, auth->alg_name);
+	memcpy(algo->alg_key, auth->alg_key, (auth->alg_key_len + 7) / 8);
+	algo->alg_key_len = auth->alg_key_len;
+
+	return 0;
+}
+
 /* Don't change this without updating xfrm_sa_len! */
 static int copy_to_user_state_extra(struct xfrm_state *x,
 				    struct xfrm_usersa_info *p,
@@ -563,8 +668,13 @@
 
 	if (x->aead)
 		NLA_PUT(skb, XFRMA_ALG_AEAD, aead_len(x->aead), x->aead);
-	if (x->aalg)
-		NLA_PUT(skb, XFRMA_ALG_AUTH, xfrm_alg_len(x->aalg), x->aalg);
+	if (x->aalg) {
+		if (copy_to_user_auth(x->aalg, skb))
+			goto nla_put_failure;
+
+		NLA_PUT(skb, XFRMA_ALG_AUTH_TRUNC,
+			xfrm_alg_auth_len(x->aalg), x->aalg);
+	}
 	if (x->ealg)
 		NLA_PUT(skb, XFRMA_ALG_CRYPT, xfrm_alg_len(x->ealg), x->ealg);
 	if (x->calg)
@@ -2117,8 +2227,11 @@
 	size_t l = 0;
 	if (x->aead)
 		l += nla_total_size(aead_len(x->aead));
-	if (x->aalg)
-		l += nla_total_size(xfrm_alg_len(x->aalg));
+	if (x->aalg) {
+		l += nla_total_size(sizeof(struct xfrm_algo) +
+				    (x->aalg->alg_key_len + 7) / 8);
+		l += nla_total_size(xfrm_alg_auth_len(x->aalg));
+	}
 	if (x->ealg)
 		l += nla_total_size(xfrm_alg_len(x->ealg));
 	if (x->calg)
@@ -2608,22 +2721,24 @@
 				     xfrm_netlink_rcv, NULL, THIS_MODULE);
 	if (nlsk == NULL)
 		return -ENOMEM;
+	net->xfrm.nlsk_stash = nlsk; /* Don't set to NULL */
 	rcu_assign_pointer(net->xfrm.nlsk, nlsk);
 	return 0;
 }
 
-static void __net_exit xfrm_user_net_exit(struct net *net)
+static void __net_exit xfrm_user_net_exit(struct list_head *net_exit_list)
 {
-	struct sock *nlsk = net->xfrm.nlsk;
-
-	rcu_assign_pointer(net->xfrm.nlsk, NULL);
-	synchronize_rcu();
-	netlink_kernel_release(nlsk);
+	struct net *net;
+	list_for_each_entry(net, net_exit_list, exit_list)
+		rcu_assign_pointer(net->xfrm.nlsk, NULL);
+	synchronize_net();
+	list_for_each_entry(net, net_exit_list, exit_list)
+		netlink_kernel_release(net->xfrm.nlsk_stash);
 }
 
 static struct pernet_operations xfrm_user_net_ops = {
-	.init = xfrm_user_net_init,
-	.exit = xfrm_user_net_exit,
+	.init	    = xfrm_user_net_init,
+	.exit_batch = xfrm_user_net_exit,
 };
 
 static int __init xfrm_user_init(void)
diff --git a/samples/Kconfig b/samples/Kconfig
index b92bde3..e4be84a 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -40,5 +40,11 @@
 	default m
 	depends on SAMPLE_KPROBES && KRETPROBES
 
+config SAMPLE_HW_BREAKPOINT
+	tristate "Build kernel hardware breakpoint examples -- loadable module only"
+	depends on HAVE_HW_BREAKPOINT && m
+	help
+	  This builds kernel hardware breakpoint example modules.
+
 endif # SAMPLES
 
diff --git a/samples/Makefile b/samples/Makefile
index 43343a0..0f15e6d 100644
--- a/samples/Makefile
+++ b/samples/Makefile
@@ -1,3 +1,4 @@
 # Makefile for Linux samples code
 
-obj-$(CONFIG_SAMPLES)	+= kobject/ kprobes/ tracepoints/ trace_events/
+obj-$(CONFIG_SAMPLES)	+= kobject/ kprobes/ tracepoints/ trace_events/ \
+			   hw_breakpoint/
diff --git a/samples/hw_breakpoint/Makefile b/samples/hw_breakpoint/Makefile
new file mode 100644
index 0000000..0f5c31c
--- /dev/null
+++ b/samples/hw_breakpoint/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SAMPLE_HW_BREAKPOINT) += data_breakpoint.o
diff --git a/samples/hw_breakpoint/data_breakpoint.c b/samples/hw_breakpoint/data_breakpoint.c
new file mode 100644
index 0000000..2952550
--- /dev/null
+++ b/samples/hw_breakpoint/data_breakpoint.c
@@ -0,0 +1,87 @@
+/*
+ * data_breakpoint.c - Sample HW Breakpoint file to watch kernel data address
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * usage: insmod data_breakpoint.ko ksym=<ksym_name>
+ *
+ * This file is a kernel module that places a breakpoint over ksym_name kernel
+ * variable using Hardware Breakpoint register. The corresponding handler which
+ * prints a backtrace is invoked everytime a write operation is performed on
+ * that variable.
+ *
+ * Copyright (C) IBM Corporation, 2009
+ *
+ * Author: K.Prasad <prasad@linux.vnet.ibm.com>
+ */
+#include <linux/module.h>	/* Needed by all modules */
+#include <linux/kernel.h>	/* Needed for KERN_INFO */
+#include <linux/init.h>		/* Needed for the macros */
+#include <linux/kallsyms.h>
+
+#include <linux/perf_event.h>
+#include <linux/hw_breakpoint.h>
+
+struct perf_event **sample_hbp;
+
+static char ksym_name[KSYM_NAME_LEN] = "pid_max";
+module_param_string(ksym, ksym_name, KSYM_NAME_LEN, S_IRUGO);
+MODULE_PARM_DESC(ksym, "Kernel symbol to monitor; this module will report any"
+			" write operations on the kernel symbol");
+
+static void sample_hbp_handler(struct perf_event *temp, void *data)
+{
+	printk(KERN_INFO "%s value is changed\n", ksym_name);
+	dump_stack();
+	printk(KERN_INFO "Dump stack from sample_hbp_handler\n");
+}
+
+static int __init hw_break_module_init(void)
+{
+	int ret;
+	DEFINE_BREAKPOINT_ATTR(attr);
+
+	attr.bp_addr = kallsyms_lookup_name(ksym_name);
+	attr.bp_len = HW_BREAKPOINT_LEN_4;
+	attr.bp_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+
+	sample_hbp = register_wide_hw_breakpoint(&attr, sample_hbp_handler);
+	if (IS_ERR(sample_hbp)) {
+		ret = PTR_ERR(sample_hbp);
+		goto fail;
+	}
+
+	printk(KERN_INFO "HW Breakpoint for %s write installed\n", ksym_name);
+
+	return 0;
+
+fail:
+	printk(KERN_INFO "Breakpoint registration failed\n");
+
+	return ret;
+}
+
+static void __exit hw_break_module_exit(void)
+{
+	unregister_wide_hw_breakpoint(sample_hbp);
+	printk(KERN_INFO "HW Breakpoint for %s write uninstalled\n", ksym_name);
+}
+
+module_init(hw_break_module_init);
+module_exit(hw_break_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("K.Prasad");
+MODULE_DESCRIPTION("ksym breakpoint");
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
index 6d69c7c..80599e3 100644
--- a/scripts/kconfig/Makefile
+++ b/scripts/kconfig/Makefile
@@ -30,7 +30,7 @@
 	$< -s $(Kconfig)
 
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)perl $< $(Kconfig) > .tmp.config
+	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
 			(mv -f .config .config.old.1;		\
@@ -44,7 +44,7 @@
 	$(Q)rm -f .tmp.config
 
 localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
-	$(Q)perl $< $(Kconfig) > .tmp.config
+	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
 	$(Q)sed -i s/=m/=y/ .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl
index 95984db..0d80082 100644
--- a/scripts/kconfig/streamline_config.pl
+++ b/scripts/kconfig/streamline_config.pl
@@ -43,7 +43,6 @@
 #    make oldconfig
 #
 my $config = ".config";
-my $linuxpath = ".";
 
 my $uname = `uname -r`;
 chomp $uname;
@@ -111,7 +110,11 @@
 
 find_config;
 
-my @makefiles = `find $linuxpath -name Makefile`;
+# Get the build source and top level Kconfig file (passed in)
+my $ksource = $ARGV[0];
+my $kconfig = $ARGV[1];
+
+my @makefiles = `find $ksource -name Makefile`;
 my %depends;
 my %selects;
 my %prompts;
@@ -119,9 +122,6 @@
 my $var;
 my $cont = 0;
 
-# Get the top level Kconfig file (passed in)
-my $kconfig = $ARGV[0];
-
 # prevent recursion
 my %read_kconfigs;
 
@@ -132,7 +132,7 @@
     my $config;
     my @kconfigs;
 
-    open(KIN, $kconfig) || die "Can't open $kconfig";
+    open(KIN, "$ksource/$kconfig") || die "Can't open $kconfig";
     while (<KIN>) {
 	chomp;
 
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index ea9f8a5..241310e 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1852,10 +1852,17 @@
 	my $tracepointname = 0;
 	my $tracepointargs = 0;
 
-	if($prototype =~ m/TRACE_EVENT\((.*?),/) {
+	if ($prototype =~ m/TRACE_EVENT\((.*?),/) {
 		$tracepointname = $1;
 	}
-	if($prototype =~ m/TP_PROTO\((.*?)\)/) {
+	if ($prototype =~ m/DEFINE_SINGLE_EVENT\((.*?),/) {
+		$tracepointname = $1;
+	}
+	if ($prototype =~ m/DEFINE_EVENT\((.*?),(.*?),/) {
+		$tracepointname = $2;
+	}
+	$tracepointname =~ s/^\s+//; #strip leading whitespace
+	if ($prototype =~ m/TP_PROTO\((.*?)\)/) {
 		$tracepointargs = $1;
 	}
 	if (($tracepointname eq 0) || ($tracepointargs eq 0)) {
@@ -1920,7 +1927,9 @@
 	if ($prototype =~ /SYSCALL_DEFINE/) {
 		syscall_munge();
 	}
-	if ($prototype =~ /TRACE_EVENT/) {
+	if ($prototype =~ /TRACE_EVENT/ || $prototype =~ /DEFINE_EVENT/ ||
+	    $prototype =~ /DEFINE_SINGLE_EVENT/)
+	{
 		tracepoint_munge($file);
 	}
 	dump_function($prototype, $file);
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl
index 090d300..f0d1445 100755
--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -6,77 +6,93 @@
 #                   all the offsets to the calls to mcount.
 #
 #
-# What we want to end up with is a section in vmlinux called
-# __mcount_loc that contains a list of pointers to all the
-# call sites in the kernel that call mcount. Later on boot up, the kernel
-# will read this list, save the locations and turn them into nops.
-# When tracing or profiling is later enabled, these locations will then
-# be converted back to pointers to some function.
+# What we want to end up with this is that each object file will have a
+# section called __mcount_loc that will hold the list of pointers to mcount
+# callers. After final linking, the vmlinux will have within .init.data the
+# list of all callers to mcount between __start_mcount_loc and __stop_mcount_loc.
+# Later on boot up, the kernel will read this list, save the locations and turn
+# them into nops. When tracing or profiling is later enabled, these locations
+# will then be converted back to pointers to some function.
 #
 # This is no easy feat. This script is called just after the original
 # object is compiled and before it is linked.
 #
-# The references to the call sites are offsets from the section of text
-# that the call site is in. Hence, all functions in a section that
-# has a call site to mcount, will have the offset from the beginning of
-# the section and not the beginning of the function.
+# When parse this object file using 'objdump', the references to the call
+# sites are offsets from the section that the call site is in. Hence, all
+# functions in a section that has a call site to mcount, will have the
+# offset from the beginning of the section and not the beginning of the
+# function.
 #
-# The trick is to find a way to record the beginning of the section.
-# The way we do this is to look at the first function in the section
-# which will also be the location of that section after final link.
+# But where this section will reside finally in vmlinx is undetermined at
+# this point. So we can't use this kind of offsets to record the final
+# address of this call site.
+#
+# The trick is to change the call offset referring the start of a section to
+# referring a function symbol in this section. During the link step, 'ld' will
+# compute the final address according to the information we record.
+#
 # e.g.
 #
 #  .section ".sched.text", "ax"
-#  .globl my_func
-#  my_func:
 #        [...]
-#        call mcount  (offset: 0x5)
+#  func1:
+#        [...]
+#        call mcount  (offset: 0x10)
 #        [...]
 #        ret
-#  other_func:
+#  .globl fun2
+#  func2:             (offset: 0x20)
 #        [...]
-#        call mcount (offset: 0x1b)
+#        [...]
+#        ret
+#  func3:
+#        [...]
+#        call mcount (offset: 0x30)
 #        [...]
 #
 # Both relocation offsets for the mcounts in the above example will be
-# offset from .sched.text. If we make another file called tmp.s with:
+# offset from .sched.text. If we choose global symbol func2 as a reference and
+# make another file called tmp.s with the new offsets:
 #
 #  .section __mcount_loc
-#  .quad  my_func + 0x5
-#  .quad  my_func + 0x1b
+#  .quad  func2 - 0x10
+#  .quad  func2 + 0x10
 #
-# We can then compile this tmp.s into tmp.o, and link it to the original
+# We can then compile this tmp.s into tmp.o, and link it back to the original
 # object.
 #
-# But this gets hard if my_func is not globl (a static function).
-# In such a case we have:
+# In our algorithm, we will choose the first global function we meet in this
+# section as the reference. But this gets hard if there is no global functions
+# in this section. In such a case we have to select a local one. E.g. func1:
 #
 #  .section ".sched.text", "ax"
-#  my_func:
+#  func1:
 #        [...]
-#        call mcount  (offset: 0x5)
+#        call mcount  (offset: 0x10)
 #        [...]
 #        ret
-#  other_func:
+#  func2:
 #        [...]
-#        call mcount (offset: 0x1b)
+#        call mcount (offset: 0x20)
 #        [...]
+#  .section "other.section"
 #
 # If we make the tmp.s the same as above, when we link together with
-# the original object, we will end up with two symbols for my_func:
+# the original object, we will end up with two symbols for func1:
 # one local, one global.  After final compile, we will end up with
-# an undefined reference to my_func.
+# an undefined reference to func1 or a wrong reference to another global
+# func1 in other files.
 #
 # Since local objects can reference local variables, we need to find
 # a way to make tmp.o reference the local objects of the original object
-# file after it is linked together. To do this, we convert the my_func
+# file after it is linked together. To do this, we convert func1
 # into a global symbol before linking tmp.o. Then after we link tmp.o
-# we will only have a single symbol for my_func that is global.
-# We can convert my_func back into a local symbol and we are done.
+# we will only have a single symbol for func1 that is global.
+# We can convert func1 back into a local symbol and we are done.
 #
 # Here are the steps we take:
 #
-# 1) Record all the local symbols by using 'nm'
+# 1) Record all the local and weak symbols by using 'nm'
 # 2) Use objdump to find all the call site offsets and sections for
 #    mcount.
 # 3) Compile the list into its own object.
@@ -86,10 +102,8 @@
 # 6) Link together this new object with the list object.
 # 7) Convert the local functions back to local symbols and rename
 #    the result as the original object.
-#    End.
 # 8) Link the object with the list object.
 # 9) Move the result back to the original object.
-#    End.
 #
 
 use strict;
@@ -99,7 +113,7 @@
 
 my $V = '0.1';
 
-if ($#ARGV < 7) {
+if ($#ARGV != 10) {
 	print "usage: $P arch bits objdump objcopy cc ld nm rm mv is_module inputfile\n";
 	print "version: $V\n";
 	exit(1);
@@ -109,7 +123,7 @@
     $ld, $nm, $rm, $mv, $is_module, $inputfile) = @ARGV;
 
 # This file refers to mcount and shouldn't be ftraced, so lets' ignore it
-if ($inputfile eq "kernel/trace/ftrace.o") {
+if ($inputfile =~ m,kernel/trace/ftrace\.o$,) {
     exit(0);
 }
 
@@ -119,6 +133,7 @@
      ".sched.text" => 1,
      ".spinlock.text" => 1,
      ".irqentry.text" => 1,
+     ".text.unlikely" => 1,
 );
 
 $objdump = "objdump" if ((length $objdump) == 0);
@@ -137,13 +152,47 @@
 my %convert;		# List of local functions used that needs conversion
 
 my $type;
-my $nm_regex;		# Find the local functions (return function)
+my $local_regex;	# Match a local function (return function)
+my $weak_regex; 	# Match a weak function (return function)
 my $section_regex;	# Find the start of a section
 my $function_regex;	# Find the name of a function
 			#    (return offset and func name)
 my $mcount_regex;	# Find the call site to mcount (return offset)
 my $alignment;		# The .align value to use for $mcount_section
 my $section_type;	# Section header plus possible alignment command
+my $can_use_local = 0; 	# If we can use local function references
+
+# Shut up recordmcount if user has older objcopy
+my $quiet_recordmcount = ".tmp_quiet_recordmcount";
+my $print_warning = 1;
+$print_warning = 0 if ( -f $quiet_recordmcount);
+
+##
+# check_objcopy - whether objcopy supports --globalize-symbols
+#
+#  --globalize-symbols came out in 2.17, we must test the version
+#  of objcopy, and if it is less than 2.17, then we can not
+#  record local functions.
+sub check_objcopy
+{
+    open (IN, "$objcopy --version |") or die "error running $objcopy";
+    while (<IN>) {
+	if (/objcopy.*\s(\d+)\.(\d+)/) {
+	    $can_use_local = 1 if ($1 > 2 || ($1 == 2 && $2 >= 17));
+	    last;
+	}
+    }
+    close (IN);
+
+    if (!$can_use_local && $print_warning) {
+	print STDERR "WARNING: could not find objcopy version or version " .
+	    "is less than 2.17.\n" .
+	    "\tLocal function references are disabled.\n";
+	open (QUIET, ">$quiet_recordmcount");
+	printf QUIET "Disables the warning from recordmcount.pl\n";
+	close QUIET;
+    }
+}
 
 if ($arch eq "x86") {
     if ($bits == 64) {
@@ -157,7 +206,8 @@
 # We base the defaults off of i386, the other archs may
 # feel free to change them in the below if statements.
 #
-$nm_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
+$local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\S+)";
+$weak_regex = "^[0-9a-fA-F]+\\s+([wW])\\s+(\\S+)";
 $section_regex = "Disassembly of section\\s+(\\S+):";
 $function_regex = "^([0-9a-fA-F]+)\\s+<(.*?)>:";
 $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\smcount\$";
@@ -206,7 +256,7 @@
     $cc .= " -m32";
 
 } elsif ($arch eq "powerpc") {
-    $nm_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
+    $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";
     $function_regex = "^([0-9a-fA-F]+)\\s+<(\\.?.*?)>:";
     $mcount_regex = "^\\s*([0-9a-fA-F]+):.*\\s\\.?_mcount\$";
 
@@ -278,44 +328,17 @@
 my $mcount_s = $dirname . "/.tmp_mc_" . $prefix . ".s";
 my $mcount_o = $dirname . "/.tmp_mc_" . $prefix . ".o";
 
-#
-# --globalize-symbols came out in 2.17, we must test the version
-# of objcopy, and if it is less than 2.17, then we can not
-# record local functions.
-my $use_locals = 01;
-my $local_warn_once = 0;
-my $found_version = 0;
-
-open (IN, "$objcopy --version |") || die "error running $objcopy";
-while (<IN>) {
-    if (/objcopy.*\s(\d+)\.(\d+)/) {
-	my $major = $1;
-	my $minor = $2;
-
-	$found_version = 1;
-	if ($major < 2 ||
-	    ($major == 2 && $minor < 17)) {
-	    $use_locals = 0;
-	}
-	last;
-    }
-}
-close (IN);
-
-if (!$found_version) {
-    print STDERR "WARNING: could not find objcopy version.\n" .
-	"\tDisabling local function references.\n";
-}
+check_objcopy();
 
 #
 # Step 1: find all the local (static functions) and weak symbols.
-#        't' is local, 'w/W' is weak (we never use a weak function)
+#         't' is local, 'w/W' is weak
 #
 open (IN, "$nm $inputfile|") || die "error running $nm";
 while (<IN>) {
-    if (/$nm_regex/) {
+    if (/$local_regex/) {
 	$locals{$1} = 1;
-    } elsif (/^[0-9a-fA-F]+\s+([wW])\s+(\S+)/) {
+    } elsif (/$weak_regex/) {
 	$weak{$2} = $1;
     }
 }
@@ -333,26 +356,20 @@
 #
 sub update_funcs
 {
-    return if ($#offsets < 0);
+    return unless ($ref_func and @offsets);
 
-    defined($ref_func) || die "No function to reference";
-
-    # A section only had a weak function, to represent it.
-    # Unfortunately, a weak function may be overwritten by another
-    # function of the same name, making all these offsets incorrect.
-    # To be safe, we simply print a warning and bail.
+    # Sanity check on weak function. A weak function may be overwritten by
+    # another function of the same name, making all these offsets incorrect.
     if (defined $weak{$ref_func}) {
-	print STDERR
-	    "$inputfile: WARNING: referencing weak function" .
+	die "$inputfile: ERROR: referencing weak function" .
 	    " $ref_func for mcount\n";
-	return;
     }
 
     # is this function static? If so, note this fact.
     if (defined $locals{$ref_func}) {
 
 	# only use locals if objcopy supports globalize-symbols
-	if (!$use_locals) {
+	if (!$can_use_local) {
 	    return;
 	}
 	$convert{$ref_func} = 1;
@@ -378,9 +395,27 @@
 
 my $text;
 
+
+# read headers first
 my $read_headers = 1;
 
 while (<IN>) {
+
+    if ($read_headers && /$mcount_section/) {
+	#
+	# Somehow the make process can execute this script on an
+	# object twice. If it does, we would duplicate the mcount
+	# section and it will cause the function tracer self test
+	# to fail. Check if the mcount section exists, and if it does,
+	# warn and exit.
+	#
+	print STDERR "ERROR: $mcount_section already in $inputfile\n" .
+	    "\tThis may be an indication that your build is corrupted.\n" .
+	    "\tDelete $inputfile and try again. If the same object file\n" .
+	    "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
+	exit(-1);
+    }
+
     # is it a section?
     if (/$section_regex/) {
 	$read_headers = 0;
@@ -392,7 +427,7 @@
 	    $read_function = 0;
 	}
 	# print out any recorded offsets
-	update_funcs() if (defined($ref_func));
+	update_funcs();
 
 	# reset all markers and arrays
 	$text_found = 0;
@@ -421,21 +456,7 @@
 		$offset = hex $1;
 	    }
 	}
-    } elsif ($read_headers && /$mcount_section/) {
-	#
-	# Somehow the make process can execute this script on an
-	# object twice. If it does, we would duplicate the mcount
-	# section and it will cause the function tracer self test
-	# to fail. Check if the mcount section exists, and if it does,
-	# warn and exit.
-	#
-	print STDERR "ERROR: $mcount_section already in $inputfile\n" .
-	    "\tThis may be an indication that your build is corrupted.\n" .
-	    "\tDelete $inputfile and try again. If the same object file\n" .
-	    "\tstill causes an issue, then disable CONFIG_DYNAMIC_FTRACE.\n";
-	exit(-1);
     }
-
     # is this a call site to mcount? If so, record it to print later
     if ($text_found && /$mcount_regex/) {
 	$offsets[$#offsets + 1] = hex $1;
@@ -443,7 +464,7 @@
 }
 
 # dump out anymore offsets that may have been found
-update_funcs() if (defined($ref_func));
+update_funcs();
 
 # If we did not find any mcount callers, we are done (do nothing).
 if (!$opened) {
diff --git a/scripts/selinux/Makefile b/scripts/selinux/Makefile
index ca4b1ec..e8049da 100644
--- a/scripts/selinux/Makefile
+++ b/scripts/selinux/Makefile
@@ -1,2 +1,2 @@
-subdir-y := mdp
-subdir-	+= mdp
+subdir-y := mdp genheaders
+subdir-	+= mdp genheaders
diff --git a/scripts/selinux/genheaders/.gitignore b/scripts/selinux/genheaders/.gitignore
new file mode 100644
index 0000000..4c0b646
--- /dev/null
+++ b/scripts/selinux/genheaders/.gitignore
@@ -0,0 +1 @@
+genheaders
diff --git a/scripts/selinux/genheaders/Makefile b/scripts/selinux/genheaders/Makefile
new file mode 100644
index 0000000..417b165
--- /dev/null
+++ b/scripts/selinux/genheaders/Makefile
@@ -0,0 +1,5 @@
+hostprogs-y	:= genheaders
+HOST_EXTRACFLAGS += -Isecurity/selinux/include
+
+always		:= $(hostprogs-y)
+clean-files	:= $(hostprogs-y)
diff --git a/scripts/selinux/genheaders/genheaders.c b/scripts/selinux/genheaders/genheaders.c
new file mode 100644
index 0000000..2462696
--- /dev/null
+++ b/scripts/selinux/genheaders/genheaders.c
@@ -0,0 +1,118 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <errno.h>
+#include <ctype.h>
+
+struct security_class_mapping {
+	const char *name;
+	const char *perms[sizeof(unsigned) * 8 + 1];
+};
+
+#include "classmap.h"
+#include "initial_sid_to_string.h"
+
+#define max(x, y) (((int)(x) > (int)(y)) ? x : y)
+
+const char *progname;
+
+static void usage(void)
+{
+	printf("usage: %s flask.h av_permissions.h\n", progname);
+	exit(1);
+}
+
+static char *stoupperx(const char *s)
+{
+	char *s2 = strdup(s);
+	char *p;
+
+	if (!s2) {
+		fprintf(stderr, "%s:  out of memory\n", progname);
+		exit(3);
+	}
+
+	for (p = s2; *p; p++)
+		*p = toupper(*p);
+	return s2;
+}
+
+int main(int argc, char *argv[])
+{
+	int i, j, k;
+	int isids_len;
+	FILE *fout;
+
+	progname = argv[0];
+
+	if (argc < 3)
+		usage();
+
+	fout = fopen(argv[1], "w");
+	if (!fout) {
+		fprintf(stderr, "Could not open %s for writing:  %s\n",
+			argv[1], strerror(errno));
+		exit(2);
+	}
+
+	for (i = 0; secclass_map[i].name; i++) {
+		struct security_class_mapping *map = &secclass_map[i];
+		map->name = stoupperx(map->name);
+		for (j = 0; map->perms[j]; j++)
+			map->perms[j] = stoupperx(map->perms[j]);
+	}
+
+	isids_len = sizeof(initial_sid_to_string) / sizeof (char *);
+	for (i = 1; i < isids_len; i++)
+		initial_sid_to_string[i] = stoupperx(initial_sid_to_string[i]);
+
+	fprintf(fout, "/* This file is automatically generated.  Do not edit. */\n");
+	fprintf(fout, "#ifndef _SELINUX_FLASK_H_\n#define _SELINUX_FLASK_H_\n\n");
+
+	for (i = 0; secclass_map[i].name; i++) {
+		struct security_class_mapping *map = &secclass_map[i];
+		fprintf(fout, "#define SECCLASS_%s", map->name);
+		for (j = 0; j < max(1, 40 - strlen(map->name)); j++)
+			fprintf(fout, " ");
+		fprintf(fout, "%2d\n", i+1);
+	}
+
+	fprintf(fout, "\n");
+
+	for (i = 1; i < isids_len; i++) {
+		char *s = initial_sid_to_string[i];
+		fprintf(fout, "#define SECINITSID_%s", s);
+		for (j = 0; j < max(1, 40 - strlen(s)); j++)
+			fprintf(fout, " ");
+		fprintf(fout, "%2d\n", i);
+	}
+	fprintf(fout, "\n#define SECINITSID_NUM %d\n", i-1);
+	fprintf(fout, "\n#endif\n");
+	fclose(fout);
+
+	fout = fopen(argv[2], "w");
+	if (!fout) {
+		fprintf(stderr, "Could not open %s for writing:  %s\n",
+			argv[2], strerror(errno));
+		exit(4);
+	}
+
+	fprintf(fout, "/* This file is automatically generated.  Do not edit. */\n");
+	fprintf(fout, "#ifndef _SELINUX_AV_PERMISSIONS_H_\n#define _SELINUX_AV_PERMISSIONS_H_\n\n");
+
+	for (i = 0; secclass_map[i].name; i++) {
+		struct security_class_mapping *map = &secclass_map[i];
+		for (j = 0; map->perms[j]; j++) {
+			fprintf(fout, "#define %s__%s", map->name,
+				map->perms[j]);
+			for (k = 0; k < max(1, 40 - strlen(map->name) - strlen(map->perms[j])); k++)
+				fprintf(fout, " ");
+			fprintf(fout, "0x%08xUL\n", (1<<j));
+		}
+	}
+
+	fprintf(fout, "\n#endif\n");
+	fclose(fout);
+	exit(0);
+}
diff --git a/scripts/selinux/mdp/mdp.c b/scripts/selinux/mdp/mdp.c
index b4ced85..62b34ce 100644
--- a/scripts/selinux/mdp/mdp.c
+++ b/scripts/selinux/mdp/mdp.c
@@ -29,86 +29,27 @@
 #include <unistd.h>
 #include <string.h>
 
-#include "flask.h"
-
 static void usage(char *name)
 {
 	printf("usage: %s [-m] policy_file context_file\n", name);
 	exit(1);
 }
 
-static void find_common_name(char *cname, char *dest, int len)
-{
-	char *start, *end;
-
-	start = strchr(cname, '_')+1;
-	end = strchr(start, '_');
-	if (!start || !end || start-cname > len || end-start > len) {
-		printf("Error with commons defines\n");
-		exit(1);
-	}
-	strncpy(dest, start, end-start);
-	dest[end-start] = '\0';
-}
-
-#define S_(x) x,
-static char *classlist[] = {
-#include "class_to_string.h"
-	NULL
+/* Class/perm mapping support */
+struct security_class_mapping {
+	const char *name;
+	const char *perms[sizeof(unsigned) * 8 + 1];
 };
-#undef S_
 
+#include "classmap.h"
 #include "initial_sid_to_string.h"
 
-#define TB_(x) char *x[] = {
-#define TE_(x) NULL };
-#define S_(x) x,
-#include "common_perm_to_string.h"
-#undef TB_
-#undef TE_
-#undef S_
-
-struct common {
-	char *cname;
-	char **perms;
-};
-struct common common[] = {
-#define TB_(x) { #x, x },
-#define S_(x)
-#define TE_(x)
-#include "common_perm_to_string.h"
-#undef TB_
-#undef TE_
-#undef S_
-};
-
-#define S_(x, y, z) {x, #y},
-struct av_inherit {
-	int class;
-	char *common;
-};
-struct av_inherit av_inherit[] = {
-#include "av_inherit.h"
-};
-#undef S_
-
-#include "av_permissions.h"
-#define S_(x, y, z) {x, y, z},
-struct av_perms {
-	int class;
-	int perm_i;
-	char *perm_s;
-};
-struct av_perms av_perms[] = {
-#include "av_perm_to_string.h"
-};
-#undef S_
-
 int main(int argc, char *argv[])
 {
 	int i, j, mls = 0;
+	int initial_sid_to_string_len;
 	char **arg, *polout, *ctxout;
-	int classlist_len, initial_sid_to_string_len;
+
 	FILE *fout;
 
 	if (argc < 3)
@@ -127,64 +68,25 @@
 		usage(argv[0]);
 	}
 
-	classlist_len = sizeof(classlist) / sizeof(char *);
 	/* print out the classes */
-	for (i=1; i < classlist_len; i++) {
-		if(classlist[i])
-			fprintf(fout, "class %s\n", classlist[i]);
-		else
-			fprintf(fout, "class user%d\n", i);
-	}
+	for (i = 0; secclass_map[i].name; i++)
+		fprintf(fout, "class %s\n", secclass_map[i].name);
 	fprintf(fout, "\n");
 
 	initial_sid_to_string_len = sizeof(initial_sid_to_string) / sizeof (char *);
 	/* print out the sids */
-	for (i=1; i < initial_sid_to_string_len; i++)
+	for (i = 1; i < initial_sid_to_string_len; i++)
 		fprintf(fout, "sid %s\n", initial_sid_to_string[i]);
 	fprintf(fout, "\n");
 
-	/* print out the commons */
-	for (i=0; i< sizeof(common)/sizeof(struct common); i++) {
-		char cname[101];
-		find_common_name(common[i].cname, cname, 100);
-		cname[100] = '\0';
-		fprintf(fout, "common %s\n{\n", cname);
-		for (j=0; common[i].perms[j]; j++)
-			fprintf(fout, "\t%s\n", common[i].perms[j]);
-		fprintf(fout, "}\n\n");
-	}
-	fprintf(fout, "\n");
-
 	/* print out the class permissions */
-	for (i=1; i < classlist_len; i++) {
-		if (classlist[i]) {
-			int firstperm = -1, numperms = 0;
-
-			fprintf(fout, "class %s\n", classlist[i]);
-			/* does it inherit from a common? */
-			for (j=0; j < sizeof(av_inherit)/sizeof(struct av_inherit); j++)
-				if (av_inherit[j].class == i)
-					fprintf(fout, "inherits %s\n", av_inherit[j].common);
-
-			for (j=0; j < sizeof(av_perms)/sizeof(struct av_perms); j++) {
-				if (av_perms[j].class == i) {
-					if (firstperm == -1)
-						firstperm = j;
-					numperms++;
-				}
-			}
-			if (!numperms) {
-				fprintf(fout, "\n");
-				continue;
-			}
-
-			fprintf(fout, "{\n");
-			/* print out the av_perms */
-			for (j=0; j < numperms; j++) {
-				fprintf(fout, "\t%s\n", av_perms[firstperm+j].perm_s);
-			}
-			fprintf(fout, "}\n\n");
-		}
+	for (i = 0; secclass_map[i].name; i++) {
+		struct security_class_mapping *map = &secclass_map[i];
+		fprintf(fout, "class %s\n", map->name);
+		fprintf(fout, "{\n");
+		for (j = 0; map->perms[j]; j++)
+			fprintf(fout, "\t%s\n", map->perms[j]);
+		fprintf(fout, "}\n\n");
 	}
 	fprintf(fout, "\n");
 
@@ -197,31 +99,34 @@
 	/* types, roles, and allows */
 	fprintf(fout, "type base_t;\n");
 	fprintf(fout, "role base_r types { base_t };\n");
-	for (i=1; i < classlist_len; i++) {
-		if (classlist[i])
-			fprintf(fout, "allow base_t base_t:%s *;\n", classlist[i]);
-		else
-			fprintf(fout, "allow base_t base_t:user%d *;\n", i);
-	}
+	for (i = 0; secclass_map[i].name; i++)
+		fprintf(fout, "allow base_t base_t:%s *;\n",
+			secclass_map[i].name);
 	fprintf(fout, "user user_u roles { base_r };\n");
 	fprintf(fout, "\n");
 
 	/* default sids */
-	for (i=1; i < initial_sid_to_string_len; i++)
+	for (i = 1; i < initial_sid_to_string_len; i++)
 		fprintf(fout, "sid %s user_u:base_r:base_t\n", initial_sid_to_string[i]);
 	fprintf(fout, "\n");
 
-
 	fprintf(fout, "fs_use_xattr ext2 user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_xattr ext3 user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr ext4 user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_xattr jfs user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_xattr xfs user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_xattr reiserfs user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr jffs2 user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr gfs2 user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_xattr lustre user_u:base_r:base_t;\n");
 
+	fprintf(fout, "fs_use_task eventpollfs user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_task pipefs user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_task sockfs user_u:base_r:base_t;\n");
 
+	fprintf(fout, "fs_use_trans mqueue user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_trans devpts user_u:base_r:base_t;\n");
+	fprintf(fout, "fs_use_trans hugetlbfs user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_trans tmpfs user_u:base_r:base_t;\n");
 	fprintf(fout, "fs_use_trans shm user_u:base_r:base_t;\n");
 
diff --git a/security/Kconfig b/security/Kconfig
index fb363cd..226b955 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -91,28 +91,6 @@
 	  implement pathname based access controls.
 	  If you are unsure how to answer this question, answer N.
 
-config SECURITY_FILE_CAPABILITIES
-	bool "File POSIX Capabilities"
-	default n
-	help
-	  This enables filesystem capabilities, allowing you to give
-	  binaries a subset of root's powers without using setuid 0.
-
-	  If in doubt, answer N.
-
-config SECURITY_ROOTPLUG
-	bool "Root Plug Support"
-	depends on USB=y && SECURITY
-	help
-	  This is a sample LSM module that should only be used as such.
-	  It prevents any programs running with egid == 0 if a specific
-	  USB device is not present in the system.
-
-	  See <http://www.linuxjournal.com/article.php?sid=6279> for
-	  more information about this module.
-
-	  If you are unsure how to answer this question, answer N.
-
 config INTEL_TXT
 	bool "Enable Intel(R) Trusted Execution Technology (Intel(R) TXT)"
 	depends on HAVE_INTEL_TXT
@@ -165,5 +143,37 @@
 
 source security/integrity/ima/Kconfig
 
+choice
+	prompt "Default security module"
+	default DEFAULT_SECURITY_SELINUX if SECURITY_SELINUX
+	default DEFAULT_SECURITY_SMACK if SECURITY_SMACK
+	default DEFAULT_SECURITY_TOMOYO if SECURITY_TOMOYO
+	default DEFAULT_SECURITY_DAC
+
+	help
+	  Select the security module that will be used by default if the
+	  kernel parameter security= is not specified.
+
+	config DEFAULT_SECURITY_SELINUX
+		bool "SELinux" if SECURITY_SELINUX=y
+
+	config DEFAULT_SECURITY_SMACK
+		bool "Simplified Mandatory Access Control" if SECURITY_SMACK=y
+
+	config DEFAULT_SECURITY_TOMOYO
+		bool "TOMOYO" if SECURITY_TOMOYO=y
+
+	config DEFAULT_SECURITY_DAC
+		bool "Unix Discretionary Access Controls"
+
+endchoice
+
+config DEFAULT_SECURITY
+	string
+	default "selinux" if DEFAULT_SECURITY_SELINUX
+	default "smack" if DEFAULT_SECURITY_SMACK
+	default "tomoyo" if DEFAULT_SECURITY_TOMOYO
+	default "" if DEFAULT_SECURITY_DAC
+
 endmenu
 
diff --git a/security/Makefile b/security/Makefile
index 95ecc06..bb44e35 100644
--- a/security/Makefile
+++ b/security/Makefile
@@ -18,7 +18,6 @@
 obj-$(CONFIG_SECURITY_SMACK)		+= smack/built-in.o
 obj-$(CONFIG_AUDIT)			+= lsm_audit.o
 obj-$(CONFIG_SECURITY_TOMOYO)		+= tomoyo/built-in.o
-obj-$(CONFIG_SECURITY_ROOTPLUG)		+= root_plug.o
 obj-$(CONFIG_CGROUP_DEVICE)		+= device_cgroup.o
 
 # Object integrity file lists
diff --git a/security/capability.c b/security/capability.c
index fce07a7..5c700e1 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -308,6 +308,22 @@
 {
 	return 0;
 }
+
+static int cap_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
+			  mode_t mode)
+{
+	return 0;
+}
+
+static int cap_path_chown(struct path *path, uid_t uid, gid_t gid)
+{
+	return 0;
+}
+
+static int cap_path_chroot(struct path *root)
+{
+	return 0;
+}
 #endif
 
 static int cap_file_permission(struct file *file, int mask)
@@ -405,7 +421,7 @@
 	return 0;
 }
 
-static int cap_kernel_module_request(void)
+static int cap_kernel_module_request(char *kmod_name)
 {
 	return 0;
 }
@@ -977,6 +993,9 @@
 	set_to_cap_if_null(ops, path_link);
 	set_to_cap_if_null(ops, path_rename);
 	set_to_cap_if_null(ops, path_truncate);
+	set_to_cap_if_null(ops, path_chmod);
+	set_to_cap_if_null(ops, path_chown);
+	set_to_cap_if_null(ops, path_chroot);
 #endif
 	set_to_cap_if_null(ops, file_permission);
 	set_to_cap_if_null(ops, file_alloc_security);
diff --git a/security/commoncap.c b/security/commoncap.c
index fe30751..f800fdb 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -1,4 +1,4 @@
-/* Common capabilities, needed by capability.o and root_plug.o
+/* Common capabilities, needed by capability.o.
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
@@ -173,7 +173,6 @@
  */
 static inline int cap_inh_is_capped(void)
 {
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
 
 	/* they are so limited unless the current task has the CAP_SETPCAP
 	 * capability
@@ -181,7 +180,6 @@
 	if (cap_capable(current, current_cred(), CAP_SETPCAP,
 			SECURITY_CAP_AUDIT) == 0)
 		return 0;
-#endif
 	return 1;
 }
 
@@ -239,8 +237,6 @@
 	bprm->cap_effective = false;
 }
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
-
 /**
  * cap_inode_need_killpriv - Determine if inode change affects privileges
  * @dentry: The inode/dentry in being changed with change marked ATTR_KILL_PRIV
@@ -421,49 +417,6 @@
 	return rc;
 }
 
-#else
-int cap_inode_need_killpriv(struct dentry *dentry)
-{
-	return 0;
-}
-
-int cap_inode_killpriv(struct dentry *dentry)
-{
-	return 0;
-}
-
-int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps)
-{
-	memset(cpu_caps, 0, sizeof(struct cpu_vfs_cap_data));
- 	return -ENODATA;
-}
-
-static inline int get_file_caps(struct linux_binprm *bprm, bool *effective)
-{
-	bprm_clear_caps(bprm);
-	return 0;
-}
-#endif
-
-/*
- * Determine whether a exec'ing process's new permitted capabilities should be
- * limited to just what it already has.
- *
- * This prevents processes that are being ptraced from gaining access to
- * CAP_SETPCAP, unless the process they're tracing already has it, and the
- * binary they're executing has filecaps that elevate it.
- *
- *  Returns 1 if they should be limited, 0 if they are not.
- */
-static inline int cap_limit_ptraced_target(void)
-{
-#ifndef CONFIG_SECURITY_FILE_CAPABILITIES
-	if (capable(CAP_SETPCAP))
-		return 0;
-#endif
-	return 1;
-}
-
 /**
  * cap_bprm_set_creds - Set up the proposed credentials for execve().
  * @bprm: The execution parameters, including the proposed creds
@@ -523,9 +476,8 @@
 			new->euid = new->uid;
 			new->egid = new->gid;
 		}
-		if (cap_limit_ptraced_target())
-			new->cap_permitted = cap_intersect(new->cap_permitted,
-							   old->cap_permitted);
+		new->cap_permitted = cap_intersect(new->cap_permitted,
+						   old->cap_permitted);
 	}
 
 	new->suid = new->fsuid = new->euid;
@@ -739,7 +691,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
 /*
  * Rationale: code calling task_setscheduler, task_setioprio, and
  * task_setnice, assumes that
@@ -820,22 +771,6 @@
 	return 0;
 }
 
-#else
-int cap_task_setscheduler (struct task_struct *p, int policy,
-			   struct sched_param *lp)
-{
-	return 0;
-}
-int cap_task_setioprio (struct task_struct *p, int ioprio)
-{
-	return 0;
-}
-int cap_task_setnice (struct task_struct *p, int nice)
-{
-	return 0;
-}
-#endif
-
 /**
  * cap_task_prctl - Implement process control functions for this security module
  * @option: The process control function requested
@@ -866,7 +801,6 @@
 		error = !!cap_raised(new->cap_bset, arg2);
 		goto no_change;
 
-#ifdef CONFIG_SECURITY_FILE_CAPABILITIES
 	case PR_CAPBSET_DROP:
 		error = cap_prctl_drop(new, arg2);
 		if (error < 0)
@@ -917,8 +851,6 @@
 		error = new->securebits;
 		goto no_change;
 
-#endif /* def CONFIG_SECURITY_FILE_CAPABILITIES */
-
 	case PR_GET_KEEPCAPS:
 		if (issecure(SECURE_KEEP_CAPS))
 			error = 1;
diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig
index 53d9764..3d7846d 100644
--- a/security/integrity/ima/Kconfig
+++ b/security/integrity/ima/Kconfig
@@ -3,6 +3,7 @@
 config IMA
 	bool "Integrity Measurement Architecture(IMA)"
 	depends on ACPI
+	depends on SECURITY
 	select SECURITYFS
 	select CRYPTO
 	select CRYPTO_HMAC
diff --git a/security/keys/sysctl.c b/security/keys/sysctl.c
index 5e05dc0..ee32d18 100644
--- a/security/keys/sysctl.c
+++ b/security/keys/sysctl.c
@@ -17,54 +17,49 @@
 
 ctl_table key_sysctls[] = {
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "maxkeys",
 		.data = &key_quota_maxkeys,
 		.maxlen = sizeof(unsigned),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_minmax,
+		.proc_handler = proc_dointvec_minmax,
 		.extra1 = (void *) &one,
 		.extra2 = (void *) &max,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "maxbytes",
 		.data = &key_quota_maxbytes,
 		.maxlen = sizeof(unsigned),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_minmax,
+		.proc_handler = proc_dointvec_minmax,
 		.extra1 = (void *) &one,
 		.extra2 = (void *) &max,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "root_maxkeys",
 		.data = &key_quota_root_maxkeys,
 		.maxlen = sizeof(unsigned),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_minmax,
+		.proc_handler = proc_dointvec_minmax,
 		.extra1 = (void *) &one,
 		.extra2 = (void *) &max,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "root_maxbytes",
 		.data = &key_quota_root_maxbytes,
 		.maxlen = sizeof(unsigned),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_minmax,
+		.proc_handler = proc_dointvec_minmax,
 		.extra1 = (void *) &one,
 		.extra2 = (void *) &max,
 	},
 	{
-		.ctl_name = CTL_UNNUMBERED,
 		.procname = "gc_delay",
 		.data = &key_gc_delay,
 		.maxlen = sizeof(unsigned),
 		.mode = 0644,
-		.proc_handler = &proc_dointvec_minmax,
+		.proc_handler = proc_dointvec_minmax,
 		.extra1 = (void *) &zero,
 		.extra2 = (void *) &max,
 	},
-	{ .ctl_name = 0 }
+	{ }
 };
diff --git a/security/lsm_audit.c b/security/lsm_audit.c
index 3bb90b6..acba3df 100644
--- a/security/lsm_audit.c
+++ b/security/lsm_audit.c
@@ -273,11 +273,11 @@
 			case AF_INET: {
 				struct inet_sock *inet = inet_sk(sk);
 
-				print_ipv4_addr(ab, inet->rcv_saddr,
-						inet->sport,
+				print_ipv4_addr(ab, inet->inet_rcv_saddr,
+						inet->inet_sport,
 						"laddr", "lport");
-				print_ipv4_addr(ab, inet->daddr,
-						inet->dport,
+				print_ipv4_addr(ab, inet->inet_daddr,
+						inet->inet_dport,
 						"faddr", "fport");
 				break;
 			}
@@ -286,10 +286,10 @@
 				struct ipv6_pinfo *inet6 = inet6_sk(sk);
 
 				print_ipv6_addr(ab, &inet6->rcv_saddr,
-						inet->sport,
+						inet->inet_sport,
 						"laddr", "lport");
 				print_ipv6_addr(ab, &inet6->daddr,
-						inet->dport,
+						inet->inet_dport,
 						"faddr", "fport");
 				break;
 			}
@@ -354,6 +354,10 @@
 		}
 		break;
 #endif
+	case LSM_AUDIT_DATA_KMOD:
+		audit_log_format(ab, " kmod=");
+		audit_log_untrustedstring(ab, a->u.kmod_name);
+		break;
 	} /* switch (a->type) */
 }
 
diff --git a/security/min_addr.c b/security/min_addr.c
index c844eed..fc43c9d 100644
--- a/security/min_addr.c
+++ b/security/min_addr.c
@@ -33,6 +33,9 @@
 {
 	int ret;
 
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
 	ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
 
 	update_mmap_min_addr();
diff --git a/security/root_plug.c b/security/root_plug.c
deleted file mode 100644
index 2f7ffa6..0000000
--- a/security/root_plug.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Root Plug sample LSM module
- *
- * Originally written for a Linux Journal.
- *
- * Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com>
- *
- * Prevents any programs running with egid == 0 if a specific USB device
- * is not present in the system.  Yes, it can be gotten around, but is a
- * nice starting point for people to play with, and learn the LSM
- * interface.
- *
- * If you want to turn this into something with a semblance of security,
- * you need to hook the task_* functions also.
- *
- * See http://www.linuxjournal.com/article.php?sid=6279 for more information
- * about this code.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2 of the
- *	License.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/security.h>
-#include <linux/usb.h>
-#include <linux/moduleparam.h>
-
-/* default is a generic type of usb to serial converter */
-static int vendor_id = 0x0557;
-static int product_id = 0x2008;
-
-module_param(vendor_id, uint, 0400);
-module_param(product_id, uint, 0400);
-
-/* should we print out debug messages */
-static int debug = 0;
-
-module_param(debug, bool, 0600);
-
-#define MY_NAME "root_plug"
-
-#define root_dbg(fmt, arg...)					\
-	do {							\
-		if (debug)					\
-			printk(KERN_DEBUG "%s: %s: " fmt ,	\
-				MY_NAME , __func__ , 	\
-				## arg);			\
-	} while (0)
-
-static int rootplug_bprm_check_security (struct linux_binprm *bprm)
-{
-	struct usb_device *dev;
-
-	root_dbg("file %s, e_uid = %d, e_gid = %d\n",
-		 bprm->filename, bprm->cred->euid, bprm->cred->egid);
-
-	if (bprm->cred->egid == 0) {
-		dev = usb_find_device(vendor_id, product_id);
-		if (!dev) {
-			root_dbg("e_gid = 0, and device not found, "
-				 "task not allowed to run...\n");
-			return -EPERM;
-		}
-		usb_put_dev(dev);
-	}
-
-	return 0;
-}
-
-static struct security_operations rootplug_security_ops = {
-	.bprm_check_security =		rootplug_bprm_check_security,
-};
-
-static int __init rootplug_init (void)
-{
-	/* register ourselves with the security framework */
-	if (register_security (&rootplug_security_ops)) {
-		printk (KERN_INFO 
-			"Failure registering Root Plug module with the kernel\n");
-			return -EINVAL;
-	}
-	printk (KERN_INFO "Root Plug module initialized, "
-		"vendor_id = %4.4x, product id = %4.4x\n", vendor_id, product_id);
-	return 0;
-}
-
-security_initcall (rootplug_init);
diff --git a/security/security.c b/security/security.c
index c4c6732..24e060b 100644
--- a/security/security.c
+++ b/security/security.c
@@ -16,9 +16,11 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/security.h>
+#include <linux/ima.h>
 
 /* Boot-time LSM user choice */
-static __initdata char chosen_lsm[SECURITY_NAME_MAX + 1];
+static __initdata char chosen_lsm[SECURITY_NAME_MAX + 1] =
+	CONFIG_DEFAULT_SECURITY;
 
 /* things that live in capability.c */
 extern struct security_operations default_security_ops;
@@ -79,8 +81,10 @@
  *
  * Return true if:
  *	-The passed LSM is the one chosen by user at boot time,
- *	-or user didn't specify a specific LSM and we're the first to ask
- *	 for registration permission,
+ *	-or the passed LSM is configured as the default and the user did not
+ *	 choose an alternate LSM at boot time,
+ *	-or there is no default LSM set and the user didn't specify a
+ *	 specific LSM and we're the first to ask for registration permission,
  *	-or the passed LSM is currently loaded.
  * Otherwise, return false.
  */
@@ -235,7 +239,12 @@
 
 int security_bprm_check(struct linux_binprm *bprm)
 {
-	return security_ops->bprm_check_security(bprm);
+	int ret;
+
+	ret = security_ops->bprm_check_security(bprm);
+	if (ret)
+		return ret;
+	return ima_bprm_check(bprm);
 }
 
 void security_bprm_committing_creds(struct linux_binprm *bprm)
@@ -352,12 +361,21 @@
 
 int security_inode_alloc(struct inode *inode)
 {
+	int ret;
+
 	inode->i_security = NULL;
-	return security_ops->inode_alloc_security(inode);
+	ret =  security_ops->inode_alloc_security(inode);
+	if (ret)
+		return ret;
+	ret = ima_inode_alloc(inode);
+	if (ret)
+		security_inode_free(inode);
+	return ret;
 }
 
 void security_inode_free(struct inode *inode)
 {
+	ima_inode_free(inode);
 	security_ops->inode_free_security(inode);
 }
 
@@ -434,6 +452,26 @@
 		return 0;
 	return security_ops->path_truncate(path, length, time_attrs);
 }
+
+int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
+			mode_t mode)
+{
+	if (unlikely(IS_PRIVATE(dentry->d_inode)))
+		return 0;
+	return security_ops->path_chmod(dentry, mnt, mode);
+}
+
+int security_path_chown(struct path *path, uid_t uid, gid_t gid)
+{
+	if (unlikely(IS_PRIVATE(path->dentry->d_inode)))
+		return 0;
+	return security_ops->path_chown(path, uid, gid);
+}
+
+int security_path_chroot(struct path *path)
+{
+	return security_ops->path_chroot(path);
+}
 #endif
 
 int security_inode_create(struct inode *dir, struct dentry *dentry, int mode)
@@ -628,6 +666,8 @@
 void security_file_free(struct file *file)
 {
 	security_ops->file_free_security(file);
+	if (file->f_dentry)
+		ima_file_free(file);
 }
 
 int security_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
@@ -639,7 +679,12 @@
 			unsigned long prot, unsigned long flags,
 			unsigned long addr, unsigned long addr_only)
 {
-	return security_ops->file_mmap(file, reqprot, prot, flags, addr, addr_only);
+	int ret;
+
+	ret = security_ops->file_mmap(file, reqprot, prot, flags, addr, addr_only);
+	if (ret)
+		return ret;
+	return ima_file_mmap(file, prot);
 }
 
 int security_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
@@ -719,9 +764,9 @@
 	return security_ops->kernel_create_files_as(new, inode);
 }
 
-int security_kernel_module_request(void)
+int security_kernel_module_request(char *kmod_name)
 {
-	return security_ops->kernel_module_request();
+	return security_ops->kernel_module_request(kmod_name);
 }
 
 int security_task_setuid(uid_t id0, uid_t id1, uid_t id2, int flags)
diff --git a/security/selinux/.gitignore b/security/selinux/.gitignore
new file mode 100644
index 0000000..2e5040a
--- /dev/null
+++ b/security/selinux/.gitignore
@@ -0,0 +1,2 @@
+av_permissions.h
+flask.h
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index d47fc5e..f013982 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -18,5 +18,13 @@
 
 selinux-$(CONFIG_NETLABEL) += netlabel.o
 
-EXTRA_CFLAGS += -Isecurity/selinux/include
+EXTRA_CFLAGS += -Isecurity/selinux -Isecurity/selinux/include
 
+$(obj)/avc.o: $(obj)/flask.h
+
+quiet_cmd_flask = GEN     $(obj)/flask.h $(obj)/av_permissions.h
+      cmd_flask = scripts/selinux/genheaders/genheaders $(obj)/flask.h $(obj)/av_permissions.h
+
+targets += flask.h
+$(obj)/flask.h: $(src)/include/classmap.h FORCE
+	$(call if_changed,flask)
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index b4b5da1..f2dde26 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -31,43 +31,7 @@
 #include <net/ipv6.h>
 #include "avc.h"
 #include "avc_ss.h"
-
-static const struct av_perm_to_string av_perm_to_string[] = {
-#define S_(c, v, s) { c, v, s },
-#include "av_perm_to_string.h"
-#undef S_
-};
-
-static const char *class_to_string[] = {
-#define S_(s) s,
-#include "class_to_string.h"
-#undef S_
-};
-
-#define TB_(s) static const char *s[] = {
-#define TE_(s) };
-#define S_(s) s,
-#include "common_perm_to_string.h"
-#undef TB_
-#undef TE_
-#undef S_
-
-static const struct av_inherit av_inherit[] = {
-#define S_(c, i, b) {	.tclass = c,\
-			.common_pts = common_##i##_perm_to_string,\
-			.common_base =  b },
-#include "av_inherit.h"
-#undef S_
-};
-
-const struct selinux_class_perm selinux_class_perm = {
-	.av_perm_to_string = av_perm_to_string,
-	.av_pts_len = ARRAY_SIZE(av_perm_to_string),
-	.class_to_string = class_to_string,
-	.cts_len = ARRAY_SIZE(class_to_string),
-	.av_inherit = av_inherit,
-	.av_inherit_len = ARRAY_SIZE(av_inherit)
-};
+#include "classmap.h"
 
 #define AVC_CACHE_SLOTS			512
 #define AVC_DEF_CACHE_THRESHOLD		512
@@ -139,52 +103,28 @@
  */
 static void avc_dump_av(struct audit_buffer *ab, u16 tclass, u32 av)
 {
-	const char **common_pts = NULL;
-	u32 common_base = 0;
-	int i, i2, perm;
+	const char **perms;
+	int i, perm;
 
 	if (av == 0) {
 		audit_log_format(ab, " null");
 		return;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(av_inherit); i++) {
-		if (av_inherit[i].tclass == tclass) {
-			common_pts = av_inherit[i].common_pts;
-			common_base = av_inherit[i].common_base;
-			break;
-		}
-	}
+	perms = secclass_map[tclass-1].perms;
 
 	audit_log_format(ab, " {");
 	i = 0;
 	perm = 1;
-	while (perm < common_base) {
-		if (perm & av) {
-			audit_log_format(ab, " %s", common_pts[i]);
+	while (i < (sizeof(av) * 8)) {
+		if ((perm & av) && perms[i]) {
+			audit_log_format(ab, " %s", perms[i]);
 			av &= ~perm;
 		}
 		i++;
 		perm <<= 1;
 	}
 
-	while (i < sizeof(av) * 8) {
-		if (perm & av) {
-			for (i2 = 0; i2 < ARRAY_SIZE(av_perm_to_string); i2++) {
-				if ((av_perm_to_string[i2].tclass == tclass) &&
-				    (av_perm_to_string[i2].value == perm))
-					break;
-			}
-			if (i2 < ARRAY_SIZE(av_perm_to_string)) {
-				audit_log_format(ab, " %s",
-						 av_perm_to_string[i2].name);
-				av &= ~perm;
-			}
-		}
-		i++;
-		perm <<= 1;
-	}
-
 	if (av)
 		audit_log_format(ab, " 0x%x", av);
 
@@ -219,8 +159,8 @@
 		kfree(scontext);
 	}
 
-	BUG_ON(tclass >= ARRAY_SIZE(class_to_string) || !class_to_string[tclass]);
-	audit_log_format(ab, " tclass=%s", class_to_string[tclass]);
+	BUG_ON(tclass >= ARRAY_SIZE(secclass_map));
+	audit_log_format(ab, " tclass=%s", secclass_map[tclass-1].name);
 }
 
 /**
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index bb230d5..7a374c2 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -91,7 +91,6 @@
 
 #define NUM_SEL_MNT_OPTS 5
 
-extern unsigned int policydb_loaded_version;
 extern int selinux_nlmsg_lookup(u16 sclass, u16 nlmsg_type, u32 *perm);
 extern struct security_operations *security_ops;
 
@@ -3338,9 +3337,18 @@
 	return 0;
 }
 
-static int selinux_kernel_module_request(void)
+static int selinux_kernel_module_request(char *kmod_name)
 {
-	return task_has_system(current, SYSTEM__MODULE_REQUEST);
+	u32 sid;
+	struct common_audit_data ad;
+
+	sid = task_sid(current);
+
+	COMMON_AUDIT_DATA_INIT(&ad, KMOD);
+	ad.u.kmod_name = kmod_name;
+
+	return avc_has_perm(sid, SECINITSID_KERNEL, SECCLASS_SYSTEM,
+			    SYSTEM__MODULE_REQUEST, &ad);
 }
 
 static int selinux_task_setpgid(struct task_struct *p, pid_t pgid)
@@ -4085,7 +4093,7 @@
 	char *addrp;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
-	ad.u.net.netif = skb->iif;
+	ad.u.net.netif = skb->skb_iif;
 	ad.u.net.family = family;
 	err = selinux_parse_skb(skb, &ad, &addrp, 1, NULL);
 	if (err)
@@ -4147,7 +4155,7 @@
 		return 0;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
-	ad.u.net.netif = skb->iif;
+	ad.u.net.netif = skb->skb_iif;
 	ad.u.net.family = family;
 	err = selinux_parse_skb(skb, &ad, &addrp, 1, NULL);
 	if (err)
@@ -4159,7 +4167,7 @@
 		err = selinux_skb_peerlbl_sid(skb, family, &peer_sid);
 		if (err)
 			return err;
-		err = selinux_inet_sys_rcv_skb(skb->iif, addrp, family,
+		err = selinux_inet_sys_rcv_skb(skb->skb_iif, addrp, family,
 					       peer_sid, &ad);
 		if (err) {
 			selinux_netlbl_err(skb, err, 0);
@@ -4714,10 +4722,7 @@
 	if (err)
 		return err;
 
-	if (policydb_loaded_version >= POLICYDB_VERSION_NLCLASS)
-		err = selinux_nlmsg_perm(sk, skb);
-
-	return err;
+	return selinux_nlmsg_perm(sk, skb);
 }
 
 static int selinux_netlink_recv(struct sk_buff *skb, int capability)
@@ -5830,12 +5835,12 @@
 	selinux_disabled = 1;
 	selinux_enabled = 0;
 
-	/* Try to destroy the avc node cache */
-	avc_disable();
-
 	/* Reset security_ops to the secondary module, dummy or capability. */
 	security_ops = secondary_ops;
 
+	/* Try to destroy the avc node cache */
+	avc_disable();
+
 	/* Unregister netfilter hooks. */
 	selinux_nf_ip_exit();
 
diff --git a/security/selinux/include/av_inherit.h b/security/selinux/include/av_inherit.h
deleted file mode 100644
index abedcd7..0000000
--- a/security/selinux/include/av_inherit.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* This file is automatically generated.  Do not edit. */
-   S_(SECCLASS_DIR, file, 0x00020000UL)
-   S_(SECCLASS_FILE, file, 0x00020000UL)
-   S_(SECCLASS_LNK_FILE, file, 0x00020000UL)
-   S_(SECCLASS_CHR_FILE, file, 0x00020000UL)
-   S_(SECCLASS_BLK_FILE, file, 0x00020000UL)
-   S_(SECCLASS_SOCK_FILE, file, 0x00020000UL)
-   S_(SECCLASS_FIFO_FILE, file, 0x00020000UL)
-   S_(SECCLASS_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_TCP_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_UDP_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_RAWIP_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_PACKET_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_KEY_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_UNIX_STREAM_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_UNIX_DGRAM_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_TUN_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_IPC, ipc, 0x00000200UL)
-   S_(SECCLASS_SEM, ipc, 0x00000200UL)
-   S_(SECCLASS_MSGQ, ipc, 0x00000200UL)
-   S_(SECCLASS_SHM, ipc, 0x00000200UL)
-   S_(SECCLASS_NETLINK_ROUTE_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_FIREWALL_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_TCPDIAG_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_NFLOG_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_XFRM_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_SELINUX_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_AUDIT_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_IP6FW_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_DNRT_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_NETLINK_KOBJECT_UEVENT_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_APPLETALK_SOCKET, socket, 0x00400000UL)
-   S_(SECCLASS_DCCP_SOCKET, socket, 0x00400000UL)
diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h
deleted file mode 100644
index 2b683ad..0000000
--- a/security/selinux/include/av_perm_to_string.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/* This file is automatically generated.  Do not edit. */
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__MOUNT, "mount")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__REMOUNT, "remount")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__UNMOUNT, "unmount")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__GETATTR, "getattr")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__RELABELFROM, "relabelfrom")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__RELABELTO, "relabelto")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__TRANSITION, "transition")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__ASSOCIATE, "associate")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__QUOTAMOD, "quotamod")
-   S_(SECCLASS_FILESYSTEM, FILESYSTEM__QUOTAGET, "quotaget")
-   S_(SECCLASS_DIR, DIR__ADD_NAME, "add_name")
-   S_(SECCLASS_DIR, DIR__REMOVE_NAME, "remove_name")
-   S_(SECCLASS_DIR, DIR__REPARENT, "reparent")
-   S_(SECCLASS_DIR, DIR__SEARCH, "search")
-   S_(SECCLASS_DIR, DIR__RMDIR, "rmdir")
-   S_(SECCLASS_DIR, DIR__OPEN, "open")
-   S_(SECCLASS_FILE, FILE__EXECUTE_NO_TRANS, "execute_no_trans")
-   S_(SECCLASS_FILE, FILE__ENTRYPOINT, "entrypoint")
-   S_(SECCLASS_FILE, FILE__EXECMOD, "execmod")
-   S_(SECCLASS_FILE, FILE__OPEN, "open")
-   S_(SECCLASS_CHR_FILE, CHR_FILE__EXECUTE_NO_TRANS, "execute_no_trans")
-   S_(SECCLASS_CHR_FILE, CHR_FILE__ENTRYPOINT, "entrypoint")
-   S_(SECCLASS_CHR_FILE, CHR_FILE__EXECMOD, "execmod")
-   S_(SECCLASS_CHR_FILE, CHR_FILE__OPEN, "open")
-   S_(SECCLASS_BLK_FILE, BLK_FILE__OPEN, "open")
-   S_(SECCLASS_SOCK_FILE, SOCK_FILE__OPEN, "open")
-   S_(SECCLASS_FIFO_FILE, FIFO_FILE__OPEN, "open")
-   S_(SECCLASS_FD, FD__USE, "use")
-   S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__CONNECTTO, "connectto")
-   S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__NEWCONN, "newconn")
-   S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__ACCEPTFROM, "acceptfrom")
-   S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__NODE_BIND, "node_bind")
-   S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__NAME_CONNECT, "name_connect")
-   S_(SECCLASS_UDP_SOCKET, UDP_SOCKET__NODE_BIND, "node_bind")
-   S_(SECCLASS_RAWIP_SOCKET, RAWIP_SOCKET__NODE_BIND, "node_bind")
-   S_(SECCLASS_NODE, NODE__TCP_RECV, "tcp_recv")
-   S_(SECCLASS_NODE, NODE__TCP_SEND, "tcp_send")
-   S_(SECCLASS_NODE, NODE__UDP_RECV, "udp_recv")
-   S_(SECCLASS_NODE, NODE__UDP_SEND, "udp_send")
-   S_(SECCLASS_NODE, NODE__RAWIP_RECV, "rawip_recv")
-   S_(SECCLASS_NODE, NODE__RAWIP_SEND, "rawip_send")
-   S_(SECCLASS_NODE, NODE__ENFORCE_DEST, "enforce_dest")
-   S_(SECCLASS_NODE, NODE__DCCP_RECV, "dccp_recv")
-   S_(SECCLASS_NODE, NODE__DCCP_SEND, "dccp_send")
-   S_(SECCLASS_NODE, NODE__RECVFROM, "recvfrom")
-   S_(SECCLASS_NODE, NODE__SENDTO, "sendto")
-   S_(SECCLASS_NETIF, NETIF__TCP_RECV, "tcp_recv")
-   S_(SECCLASS_NETIF, NETIF__TCP_SEND, "tcp_send")
-   S_(SECCLASS_NETIF, NETIF__UDP_RECV, "udp_recv")
-   S_(SECCLASS_NETIF, NETIF__UDP_SEND, "udp_send")
-   S_(SECCLASS_NETIF, NETIF__RAWIP_RECV, "rawip_recv")
-   S_(SECCLASS_NETIF, NETIF__RAWIP_SEND, "rawip_send")
-   S_(SECCLASS_NETIF, NETIF__DCCP_RECV, "dccp_recv")
-   S_(SECCLASS_NETIF, NETIF__DCCP_SEND, "dccp_send")
-   S_(SECCLASS_NETIF, NETIF__INGRESS, "ingress")
-   S_(SECCLASS_NETIF, NETIF__EGRESS, "egress")
-   S_(SECCLASS_UNIX_STREAM_SOCKET, UNIX_STREAM_SOCKET__CONNECTTO, "connectto")
-   S_(SECCLASS_UNIX_STREAM_SOCKET, UNIX_STREAM_SOCKET__NEWCONN, "newconn")
-   S_(SECCLASS_UNIX_STREAM_SOCKET, UNIX_STREAM_SOCKET__ACCEPTFROM, "acceptfrom")
-   S_(SECCLASS_PROCESS, PROCESS__FORK, "fork")
-   S_(SECCLASS_PROCESS, PROCESS__TRANSITION, "transition")
-   S_(SECCLASS_PROCESS, PROCESS__SIGCHLD, "sigchld")
-   S_(SECCLASS_PROCESS, PROCESS__SIGKILL, "sigkill")
-   S_(SECCLASS_PROCESS, PROCESS__SIGSTOP, "sigstop")
-   S_(SECCLASS_PROCESS, PROCESS__SIGNULL, "signull")
-   S_(SECCLASS_PROCESS, PROCESS__SIGNAL, "signal")
-   S_(SECCLASS_PROCESS, PROCESS__PTRACE, "ptrace")
-   S_(SECCLASS_PROCESS, PROCESS__GETSCHED, "getsched")
-   S_(SECCLASS_PROCESS, PROCESS__SETSCHED, "setsched")
-   S_(SECCLASS_PROCESS, PROCESS__GETSESSION, "getsession")
-   S_(SECCLASS_PROCESS, PROCESS__GETPGID, "getpgid")
-   S_(SECCLASS_PROCESS, PROCESS__SETPGID, "setpgid")
-   S_(SECCLASS_PROCESS, PROCESS__GETCAP, "getcap")
-   S_(SECCLASS_PROCESS, PROCESS__SETCAP, "setcap")
-   S_(SECCLASS_PROCESS, PROCESS__SHARE, "share")
-   S_(SECCLASS_PROCESS, PROCESS__GETATTR, "getattr")
-   S_(SECCLASS_PROCESS, PROCESS__SETEXEC, "setexec")
-   S_(SECCLASS_PROCESS, PROCESS__SETFSCREATE, "setfscreate")
-   S_(SECCLASS_PROCESS, PROCESS__NOATSECURE, "noatsecure")
-   S_(SECCLASS_PROCESS, PROCESS__SIGINH, "siginh")
-   S_(SECCLASS_PROCESS, PROCESS__SETRLIMIT, "setrlimit")
-   S_(SECCLASS_PROCESS, PROCESS__RLIMITINH, "rlimitinh")
-   S_(SECCLASS_PROCESS, PROCESS__DYNTRANSITION, "dyntransition")
-   S_(SECCLASS_PROCESS, PROCESS__SETCURRENT, "setcurrent")
-   S_(SECCLASS_PROCESS, PROCESS__EXECMEM, "execmem")
-   S_(SECCLASS_PROCESS, PROCESS__EXECSTACK, "execstack")
-   S_(SECCLASS_PROCESS, PROCESS__EXECHEAP, "execheap")
-   S_(SECCLASS_PROCESS, PROCESS__SETKEYCREATE, "setkeycreate")
-   S_(SECCLASS_PROCESS, PROCESS__SETSOCKCREATE, "setsockcreate")
-   S_(SECCLASS_MSGQ, MSGQ__ENQUEUE, "enqueue")
-   S_(SECCLASS_MSG, MSG__SEND, "send")
-   S_(SECCLASS_MSG, MSG__RECEIVE, "receive")
-   S_(SECCLASS_SHM, SHM__LOCK, "lock")
-   S_(SECCLASS_SECURITY, SECURITY__COMPUTE_AV, "compute_av")
-   S_(SECCLASS_SECURITY, SECURITY__COMPUTE_CREATE, "compute_create")
-   S_(SECCLASS_SECURITY, SECURITY__COMPUTE_MEMBER, "compute_member")
-   S_(SECCLASS_SECURITY, SECURITY__CHECK_CONTEXT, "check_context")
-   S_(SECCLASS_SECURITY, SECURITY__LOAD_POLICY, "load_policy")
-   S_(SECCLASS_SECURITY, SECURITY__COMPUTE_RELABEL, "compute_relabel")
-   S_(SECCLASS_SECURITY, SECURITY__COMPUTE_USER, "compute_user")
-   S_(SECCLASS_SECURITY, SECURITY__SETENFORCE, "setenforce")
-   S_(SECCLASS_SECURITY, SECURITY__SETBOOL, "setbool")
-   S_(SECCLASS_SECURITY, SECURITY__SETSECPARAM, "setsecparam")
-   S_(SECCLASS_SECURITY, SECURITY__SETCHECKREQPROT, "setcheckreqprot")
-   S_(SECCLASS_SYSTEM, SYSTEM__IPC_INFO, "ipc_info")
-   S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_READ, "syslog_read")
-   S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_MOD, "syslog_mod")
-   S_(SECCLASS_SYSTEM, SYSTEM__SYSLOG_CONSOLE, "syslog_console")
-   S_(SECCLASS_SYSTEM, SYSTEM__MODULE_REQUEST, "module_request")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__CHOWN, "chown")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__DAC_OVERRIDE, "dac_override")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__DAC_READ_SEARCH, "dac_read_search")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__FOWNER, "fowner")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__FSETID, "fsetid")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__KILL, "kill")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SETGID, "setgid")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SETUID, "setuid")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SETPCAP, "setpcap")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__LINUX_IMMUTABLE, "linux_immutable")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__NET_BIND_SERVICE, "net_bind_service")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__NET_BROADCAST, "net_broadcast")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__NET_ADMIN, "net_admin")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__NET_RAW, "net_raw")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__IPC_LOCK, "ipc_lock")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__IPC_OWNER, "ipc_owner")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_MODULE, "sys_module")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_RAWIO, "sys_rawio")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_CHROOT, "sys_chroot")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_PTRACE, "sys_ptrace")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_PACCT, "sys_pacct")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_ADMIN, "sys_admin")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_BOOT, "sys_boot")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_NICE, "sys_nice")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_RESOURCE, "sys_resource")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_TIME, "sys_time")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SYS_TTY_CONFIG, "sys_tty_config")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__MKNOD, "mknod")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__LEASE, "lease")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__AUDIT_WRITE, "audit_write")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__AUDIT_CONTROL, "audit_control")
-   S_(SECCLASS_CAPABILITY, CAPABILITY__SETFCAP, "setfcap")
-   S_(SECCLASS_CAPABILITY2, CAPABILITY2__MAC_OVERRIDE, "mac_override")
-   S_(SECCLASS_CAPABILITY2, CAPABILITY2__MAC_ADMIN, "mac_admin")
-   S_(SECCLASS_NETLINK_ROUTE_SOCKET, NETLINK_ROUTE_SOCKET__NLMSG_READ, "nlmsg_read")
-   S_(SECCLASS_NETLINK_ROUTE_SOCKET, NETLINK_ROUTE_SOCKET__NLMSG_WRITE, "nlmsg_write")
-   S_(SECCLASS_NETLINK_FIREWALL_SOCKET, NETLINK_FIREWALL_SOCKET__NLMSG_READ, "nlmsg_read")
-   S_(SECCLASS_NETLINK_FIREWALL_SOCKET, NETLINK_FIREWALL_SOCKET__NLMSG_WRITE, "nlmsg_write")
-   S_(SECCLASS_NETLINK_TCPDIAG_SOCKET, NETLINK_TCPDIAG_SOCKET__NLMSG_READ, "nlmsg_read")
-   S_(SECCLASS_NETLINK_TCPDIAG_SOCKET, NETLINK_TCPDIAG_SOCKET__NLMSG_WRITE, "nlmsg_write")
-   S_(SECCLASS_NETLINK_XFRM_SOCKET, NETLINK_XFRM_SOCKET__NLMSG_READ, "nlmsg_read")
-   S_(SECCLASS_NETLINK_XFRM_SOCKET, NETLINK_XFRM_SOCKET__NLMSG_WRITE, "nlmsg_write")
-   S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_READ, "nlmsg_read")
-   S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_WRITE, "nlmsg_write")
-   S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_RELAY, "nlmsg_relay")
-   S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_READPRIV, "nlmsg_readpriv")
-   S_(SECCLASS_NETLINK_AUDIT_SOCKET, NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT, "nlmsg_tty_audit")
-   S_(SECCLASS_NETLINK_IP6FW_SOCKET, NETLINK_IP6FW_SOCKET__NLMSG_READ, "nlmsg_read")
-   S_(SECCLASS_NETLINK_IP6FW_SOCKET, NETLINK_IP6FW_SOCKET__NLMSG_WRITE, "nlmsg_write")
-   S_(SECCLASS_ASSOCIATION, ASSOCIATION__SENDTO, "sendto")
-   S_(SECCLASS_ASSOCIATION, ASSOCIATION__RECVFROM, "recvfrom")
-   S_(SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, "setcontext")
-   S_(SECCLASS_ASSOCIATION, ASSOCIATION__POLMATCH, "polmatch")
-   S_(SECCLASS_PACKET, PACKET__SEND, "send")
-   S_(SECCLASS_PACKET, PACKET__RECV, "recv")
-   S_(SECCLASS_PACKET, PACKET__RELABELTO, "relabelto")
-   S_(SECCLASS_PACKET, PACKET__FLOW_IN, "flow_in")
-   S_(SECCLASS_PACKET, PACKET__FLOW_OUT, "flow_out")
-   S_(SECCLASS_PACKET, PACKET__FORWARD_IN, "forward_in")
-   S_(SECCLASS_PACKET, PACKET__FORWARD_OUT, "forward_out")
-   S_(SECCLASS_KEY, KEY__VIEW, "view")
-   S_(SECCLASS_KEY, KEY__READ, "read")
-   S_(SECCLASS_KEY, KEY__WRITE, "write")
-   S_(SECCLASS_KEY, KEY__SEARCH, "search")
-   S_(SECCLASS_KEY, KEY__LINK, "link")
-   S_(SECCLASS_KEY, KEY__SETATTR, "setattr")
-   S_(SECCLASS_KEY, KEY__CREATE, "create")
-   S_(SECCLASS_DCCP_SOCKET, DCCP_SOCKET__NODE_BIND, "node_bind")
-   S_(SECCLASS_DCCP_SOCKET, DCCP_SOCKET__NAME_CONNECT, "name_connect")
-   S_(SECCLASS_MEMPROTECT, MEMPROTECT__MMAP_ZERO, "mmap_zero")
-   S_(SECCLASS_PEER, PEER__RECV, "recv")
-   S_(SECCLASS_KERNEL_SERVICE, KERNEL_SERVICE__USE_AS_OVERRIDE, "use_as_override")
-   S_(SECCLASS_KERNEL_SERVICE, KERNEL_SERVICE__CREATE_FILES_AS, "create_files_as")
diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h
deleted file mode 100644
index 0546d61..0000000
--- a/security/selinux/include/av_permissions.h
+++ /dev/null
@@ -1,870 +0,0 @@
-/* This file is automatically generated.  Do not edit. */
-#define COMMON_FILE__IOCTL                               0x00000001UL
-#define COMMON_FILE__READ                                0x00000002UL
-#define COMMON_FILE__WRITE                               0x00000004UL
-#define COMMON_FILE__CREATE                              0x00000008UL
-#define COMMON_FILE__GETATTR                             0x00000010UL
-#define COMMON_FILE__SETATTR                             0x00000020UL
-#define COMMON_FILE__LOCK                                0x00000040UL
-#define COMMON_FILE__RELABELFROM                         0x00000080UL
-#define COMMON_FILE__RELABELTO                           0x00000100UL
-#define COMMON_FILE__APPEND                              0x00000200UL
-#define COMMON_FILE__UNLINK                              0x00000400UL
-#define COMMON_FILE__LINK                                0x00000800UL
-#define COMMON_FILE__RENAME                              0x00001000UL
-#define COMMON_FILE__EXECUTE                             0x00002000UL
-#define COMMON_FILE__SWAPON                              0x00004000UL
-#define COMMON_FILE__QUOTAON                             0x00008000UL
-#define COMMON_FILE__MOUNTON                             0x00010000UL
-#define COMMON_SOCKET__IOCTL                             0x00000001UL
-#define COMMON_SOCKET__READ                              0x00000002UL
-#define COMMON_SOCKET__WRITE                             0x00000004UL
-#define COMMON_SOCKET__CREATE                            0x00000008UL
-#define COMMON_SOCKET__GETATTR                           0x00000010UL
-#define COMMON_SOCKET__SETATTR                           0x00000020UL
-#define COMMON_SOCKET__LOCK                              0x00000040UL
-#define COMMON_SOCKET__RELABELFROM                       0x00000080UL
-#define COMMON_SOCKET__RELABELTO                         0x00000100UL
-#define COMMON_SOCKET__APPEND                            0x00000200UL
-#define COMMON_SOCKET__BIND                              0x00000400UL
-#define COMMON_SOCKET__CONNECT                           0x00000800UL
-#define COMMON_SOCKET__LISTEN                            0x00001000UL
-#define COMMON_SOCKET__ACCEPT                            0x00002000UL
-#define COMMON_SOCKET__GETOPT                            0x00004000UL
-#define COMMON_SOCKET__SETOPT                            0x00008000UL
-#define COMMON_SOCKET__SHUTDOWN                          0x00010000UL
-#define COMMON_SOCKET__RECVFROM                          0x00020000UL
-#define COMMON_SOCKET__SENDTO                            0x00040000UL
-#define COMMON_SOCKET__RECV_MSG                          0x00080000UL
-#define COMMON_SOCKET__SEND_MSG                          0x00100000UL
-#define COMMON_SOCKET__NAME_BIND                         0x00200000UL
-#define COMMON_IPC__CREATE                               0x00000001UL
-#define COMMON_IPC__DESTROY                              0x00000002UL
-#define COMMON_IPC__GETATTR                              0x00000004UL
-#define COMMON_IPC__SETATTR                              0x00000008UL
-#define COMMON_IPC__READ                                 0x00000010UL
-#define COMMON_IPC__WRITE                                0x00000020UL
-#define COMMON_IPC__ASSOCIATE                            0x00000040UL
-#define COMMON_IPC__UNIX_READ                            0x00000080UL
-#define COMMON_IPC__UNIX_WRITE                           0x00000100UL
-#define FILESYSTEM__MOUNT                         0x00000001UL
-#define FILESYSTEM__REMOUNT                       0x00000002UL
-#define FILESYSTEM__UNMOUNT                       0x00000004UL
-#define FILESYSTEM__GETATTR                       0x00000008UL
-#define FILESYSTEM__RELABELFROM                   0x00000010UL
-#define FILESYSTEM__RELABELTO                     0x00000020UL
-#define FILESYSTEM__TRANSITION                    0x00000040UL
-#define FILESYSTEM__ASSOCIATE                     0x00000080UL
-#define FILESYSTEM__QUOTAMOD                      0x00000100UL
-#define FILESYSTEM__QUOTAGET                      0x00000200UL
-#define DIR__IOCTL                                0x00000001UL
-#define DIR__READ                                 0x00000002UL
-#define DIR__WRITE                                0x00000004UL
-#define DIR__CREATE                               0x00000008UL
-#define DIR__GETATTR                              0x00000010UL
-#define DIR__SETATTR                              0x00000020UL
-#define DIR__LOCK                                 0x00000040UL
-#define DIR__RELABELFROM                          0x00000080UL
-#define DIR__RELABELTO                            0x00000100UL
-#define DIR__APPEND                               0x00000200UL
-#define DIR__UNLINK                               0x00000400UL
-#define DIR__LINK                                 0x00000800UL
-#define DIR__RENAME                               0x00001000UL
-#define DIR__EXECUTE                              0x00002000UL
-#define DIR__SWAPON                               0x00004000UL
-#define DIR__QUOTAON                              0x00008000UL
-#define DIR__MOUNTON                              0x00010000UL
-#define DIR__ADD_NAME                             0x00020000UL
-#define DIR__REMOVE_NAME                          0x00040000UL
-#define DIR__REPARENT                             0x00080000UL
-#define DIR__SEARCH                               0x00100000UL
-#define DIR__RMDIR                                0x00200000UL
-#define DIR__OPEN                                 0x00400000UL
-#define FILE__IOCTL                               0x00000001UL
-#define FILE__READ                                0x00000002UL
-#define FILE__WRITE                               0x00000004UL
-#define FILE__CREATE                              0x00000008UL
-#define FILE__GETATTR                             0x00000010UL
-#define FILE__SETATTR                             0x00000020UL
-#define FILE__LOCK                                0x00000040UL
-#define FILE__RELABELFROM                         0x00000080UL
-#define FILE__RELABELTO                           0x00000100UL
-#define FILE__APPEND                              0x00000200UL
-#define FILE__UNLINK                              0x00000400UL
-#define FILE__LINK                                0x00000800UL
-#define FILE__RENAME                              0x00001000UL
-#define FILE__EXECUTE                             0x00002000UL
-#define FILE__SWAPON                              0x00004000UL
-#define FILE__QUOTAON                             0x00008000UL
-#define FILE__MOUNTON                             0x00010000UL
-#define FILE__EXECUTE_NO_TRANS                    0x00020000UL
-#define FILE__ENTRYPOINT                          0x00040000UL
-#define FILE__EXECMOD                             0x00080000UL
-#define FILE__OPEN                                0x00100000UL
-#define LNK_FILE__IOCTL                           0x00000001UL
-#define LNK_FILE__READ                            0x00000002UL
-#define LNK_FILE__WRITE                           0x00000004UL
-#define LNK_FILE__CREATE                          0x00000008UL
-#define LNK_FILE__GETATTR                         0x00000010UL
-#define LNK_FILE__SETATTR                         0x00000020UL
-#define LNK_FILE__LOCK                            0x00000040UL
-#define LNK_FILE__RELABELFROM                     0x00000080UL
-#define LNK_FILE__RELABELTO                       0x00000100UL
-#define LNK_FILE__APPEND                          0x00000200UL
-#define LNK_FILE__UNLINK                          0x00000400UL
-#define LNK_FILE__LINK                            0x00000800UL
-#define LNK_FILE__RENAME                          0x00001000UL
-#define LNK_FILE__EXECUTE                         0x00002000UL
-#define LNK_FILE__SWAPON                          0x00004000UL
-#define LNK_FILE__QUOTAON                         0x00008000UL
-#define LNK_FILE__MOUNTON                         0x00010000UL
-#define CHR_FILE__IOCTL                           0x00000001UL
-#define CHR_FILE__READ                            0x00000002UL
-#define CHR_FILE__WRITE                           0x00000004UL
-#define CHR_FILE__CREATE                          0x00000008UL
-#define CHR_FILE__GETATTR                         0x00000010UL
-#define CHR_FILE__SETATTR                         0x00000020UL
-#define CHR_FILE__LOCK                            0x00000040UL
-#define CHR_FILE__RELABELFROM                     0x00000080UL
-#define CHR_FILE__RELABELTO                       0x00000100UL
-#define CHR_FILE__APPEND                          0x00000200UL
-#define CHR_FILE__UNLINK                          0x00000400UL
-#define CHR_FILE__LINK                            0x00000800UL
-#define CHR_FILE__RENAME                          0x00001000UL
-#define CHR_FILE__EXECUTE                         0x00002000UL
-#define CHR_FILE__SWAPON                          0x00004000UL
-#define CHR_FILE__QUOTAON                         0x00008000UL
-#define CHR_FILE__MOUNTON                         0x00010000UL
-#define CHR_FILE__EXECUTE_NO_TRANS                0x00020000UL
-#define CHR_FILE__ENTRYPOINT                      0x00040000UL
-#define CHR_FILE__EXECMOD                         0x00080000UL
-#define CHR_FILE__OPEN                            0x00100000UL
-#define BLK_FILE__IOCTL                           0x00000001UL
-#define BLK_FILE__READ                            0x00000002UL
-#define BLK_FILE__WRITE                           0x00000004UL
-#define BLK_FILE__CREATE                          0x00000008UL
-#define BLK_FILE__GETATTR                         0x00000010UL
-#define BLK_FILE__SETATTR                         0x00000020UL
-#define BLK_FILE__LOCK                            0x00000040UL
-#define BLK_FILE__RELABELFROM                     0x00000080UL
-#define BLK_FILE__RELABELTO                       0x00000100UL
-#define BLK_FILE__APPEND                          0x00000200UL
-#define BLK_FILE__UNLINK                          0x00000400UL
-#define BLK_FILE__LINK                            0x00000800UL
-#define BLK_FILE__RENAME                          0x00001000UL
-#define BLK_FILE__EXECUTE                         0x00002000UL
-#define BLK_FILE__SWAPON                          0x00004000UL
-#define BLK_FILE__QUOTAON                         0x00008000UL
-#define BLK_FILE__MOUNTON                         0x00010000UL
-#define BLK_FILE__OPEN                            0x00020000UL
-#define SOCK_FILE__IOCTL                          0x00000001UL
-#define SOCK_FILE__READ                           0x00000002UL
-#define SOCK_FILE__WRITE                          0x00000004UL
-#define SOCK_FILE__CREATE                         0x00000008UL
-#define SOCK_FILE__GETATTR                        0x00000010UL
-#define SOCK_FILE__SETATTR                        0x00000020UL
-#define SOCK_FILE__LOCK                           0x00000040UL
-#define SOCK_FILE__RELABELFROM                    0x00000080UL
-#define SOCK_FILE__RELABELTO                      0x00000100UL
-#define SOCK_FILE__APPEND                         0x00000200UL
-#define SOCK_FILE__UNLINK                         0x00000400UL
-#define SOCK_FILE__LINK                           0x00000800UL
-#define SOCK_FILE__RENAME                         0x00001000UL
-#define SOCK_FILE__EXECUTE                        0x00002000UL
-#define SOCK_FILE__SWAPON                         0x00004000UL
-#define SOCK_FILE__QUOTAON                        0x00008000UL
-#define SOCK_FILE__MOUNTON                        0x00010000UL
-#define SOCK_FILE__OPEN                           0x00020000UL
-#define FIFO_FILE__IOCTL                          0x00000001UL
-#define FIFO_FILE__READ                           0x00000002UL
-#define FIFO_FILE__WRITE                          0x00000004UL
-#define FIFO_FILE__CREATE                         0x00000008UL
-#define FIFO_FILE__GETATTR                        0x00000010UL
-#define FIFO_FILE__SETATTR                        0x00000020UL
-#define FIFO_FILE__LOCK                           0x00000040UL
-#define FIFO_FILE__RELABELFROM                    0x00000080UL
-#define FIFO_FILE__RELABELTO                      0x00000100UL
-#define FIFO_FILE__APPEND                         0x00000200UL
-#define FIFO_FILE__UNLINK                         0x00000400UL
-#define FIFO_FILE__LINK                           0x00000800UL
-#define FIFO_FILE__RENAME                         0x00001000UL
-#define FIFO_FILE__EXECUTE                        0x00002000UL
-#define FIFO_FILE__SWAPON                         0x00004000UL
-#define FIFO_FILE__QUOTAON                        0x00008000UL
-#define FIFO_FILE__MOUNTON                        0x00010000UL
-#define FIFO_FILE__OPEN                           0x00020000UL
-#define FD__USE                                   0x00000001UL
-#define SOCKET__IOCTL                             0x00000001UL
-#define SOCKET__READ                              0x00000002UL
-#define SOCKET__WRITE                             0x00000004UL
-#define SOCKET__CREATE                            0x00000008UL
-#define SOCKET__GETATTR                           0x00000010UL
-#define SOCKET__SETATTR                           0x00000020UL
-#define SOCKET__LOCK                              0x00000040UL
-#define SOCKET__RELABELFROM                       0x00000080UL
-#define SOCKET__RELABELTO                         0x00000100UL
-#define SOCKET__APPEND                            0x00000200UL
-#define SOCKET__BIND                              0x00000400UL
-#define SOCKET__CONNECT                           0x00000800UL
-#define SOCKET__LISTEN                            0x00001000UL
-#define SOCKET__ACCEPT                            0x00002000UL
-#define SOCKET__GETOPT                            0x00004000UL
-#define SOCKET__SETOPT                            0x00008000UL
-#define SOCKET__SHUTDOWN                          0x00010000UL
-#define SOCKET__RECVFROM                          0x00020000UL
-#define SOCKET__SENDTO                            0x00040000UL
-#define SOCKET__RECV_MSG                          0x00080000UL
-#define SOCKET__SEND_MSG                          0x00100000UL
-#define SOCKET__NAME_BIND                         0x00200000UL
-#define TCP_SOCKET__IOCTL                         0x00000001UL
-#define TCP_SOCKET__READ                          0x00000002UL
-#define TCP_SOCKET__WRITE                         0x00000004UL
-#define TCP_SOCKET__CREATE                        0x00000008UL
-#define TCP_SOCKET__GETATTR                       0x00000010UL
-#define TCP_SOCKET__SETATTR                       0x00000020UL
-#define TCP_SOCKET__LOCK                          0x00000040UL
-#define TCP_SOCKET__RELABELFROM                   0x00000080UL
-#define TCP_SOCKET__RELABELTO                     0x00000100UL
-#define TCP_SOCKET__APPEND                        0x00000200UL
-#define TCP_SOCKET__BIND                          0x00000400UL
-#define TCP_SOCKET__CONNECT                       0x00000800UL
-#define TCP_SOCKET__LISTEN                        0x00001000UL
-#define TCP_SOCKET__ACCEPT                        0x00002000UL
-#define TCP_SOCKET__GETOPT                        0x00004000UL
-#define TCP_SOCKET__SETOPT                        0x00008000UL
-#define TCP_SOCKET__SHUTDOWN                      0x00010000UL
-#define TCP_SOCKET__RECVFROM                      0x00020000UL
-#define TCP_SOCKET__SENDTO                        0x00040000UL
-#define TCP_SOCKET__RECV_MSG                      0x00080000UL
-#define TCP_SOCKET__SEND_MSG                      0x00100000UL
-#define TCP_SOCKET__NAME_BIND                     0x00200000UL
-#define TCP_SOCKET__CONNECTTO                     0x00400000UL
-#define TCP_SOCKET__NEWCONN                       0x00800000UL
-#define TCP_SOCKET__ACCEPTFROM                    0x01000000UL
-#define TCP_SOCKET__NODE_BIND                     0x02000000UL
-#define TCP_SOCKET__NAME_CONNECT                  0x04000000UL
-#define UDP_SOCKET__IOCTL                         0x00000001UL
-#define UDP_SOCKET__READ                          0x00000002UL
-#define UDP_SOCKET__WRITE                         0x00000004UL
-#define UDP_SOCKET__CREATE                        0x00000008UL
-#define UDP_SOCKET__GETATTR                       0x00000010UL
-#define UDP_SOCKET__SETATTR                       0x00000020UL
-#define UDP_SOCKET__LOCK                          0x00000040UL
-#define UDP_SOCKET__RELABELFROM                   0x00000080UL
-#define UDP_SOCKET__RELABELTO                     0x00000100UL
-#define UDP_SOCKET__APPEND                        0x00000200UL
-#define UDP_SOCKET__BIND                          0x00000400UL
-#define UDP_SOCKET__CONNECT                       0x00000800UL
-#define UDP_SOCKET__LISTEN                        0x00001000UL
-#define UDP_SOCKET__ACCEPT                        0x00002000UL
-#define UDP_SOCKET__GETOPT                        0x00004000UL
-#define UDP_SOCKET__SETOPT                        0x00008000UL
-#define UDP_SOCKET__SHUTDOWN                      0x00010000UL
-#define UDP_SOCKET__RECVFROM                      0x00020000UL
-#define UDP_SOCKET__SENDTO                        0x00040000UL
-#define UDP_SOCKET__RECV_MSG                      0x00080000UL
-#define UDP_SOCKET__SEND_MSG                      0x00100000UL
-#define UDP_SOCKET__NAME_BIND                     0x00200000UL
-#define UDP_SOCKET__NODE_BIND                     0x00400000UL
-#define RAWIP_SOCKET__IOCTL                       0x00000001UL
-#define RAWIP_SOCKET__READ                        0x00000002UL
-#define RAWIP_SOCKET__WRITE                       0x00000004UL
-#define RAWIP_SOCKET__CREATE                      0x00000008UL
-#define RAWIP_SOCKET__GETATTR                     0x00000010UL
-#define RAWIP_SOCKET__SETATTR                     0x00000020UL
-#define RAWIP_SOCKET__LOCK                        0x00000040UL
-#define RAWIP_SOCKET__RELABELFROM                 0x00000080UL
-#define RAWIP_SOCKET__RELABELTO                   0x00000100UL
-#define RAWIP_SOCKET__APPEND                      0x00000200UL
-#define RAWIP_SOCKET__BIND                        0x00000400UL
-#define RAWIP_SOCKET__CONNECT                     0x00000800UL
-#define RAWIP_SOCKET__LISTEN                      0x00001000UL
-#define RAWIP_SOCKET__ACCEPT                      0x00002000UL
-#define RAWIP_SOCKET__GETOPT                      0x00004000UL
-#define RAWIP_SOCKET__SETOPT                      0x00008000UL
-#define RAWIP_SOCKET__SHUTDOWN                    0x00010000UL
-#define RAWIP_SOCKET__RECVFROM                    0x00020000UL
-#define RAWIP_SOCKET__SENDTO                      0x00040000UL
-#define RAWIP_SOCKET__RECV_MSG                    0x00080000UL
-#define RAWIP_SOCKET__SEND_MSG                    0x00100000UL
-#define RAWIP_SOCKET__NAME_BIND                   0x00200000UL
-#define RAWIP_SOCKET__NODE_BIND                   0x00400000UL
-#define NODE__TCP_RECV                            0x00000001UL
-#define NODE__TCP_SEND                            0x00000002UL
-#define NODE__UDP_RECV                            0x00000004UL
-#define NODE__UDP_SEND                            0x00000008UL
-#define NODE__RAWIP_RECV                          0x00000010UL
-#define NODE__RAWIP_SEND                          0x00000020UL
-#define NODE__ENFORCE_DEST                        0x00000040UL
-#define NODE__DCCP_RECV                           0x00000080UL
-#define NODE__DCCP_SEND                           0x00000100UL
-#define NODE__RECVFROM                            0x00000200UL
-#define NODE__SENDTO                              0x00000400UL
-#define NETIF__TCP_RECV                           0x00000001UL
-#define NETIF__TCP_SEND                           0x00000002UL
-#define NETIF__UDP_RECV                           0x00000004UL
-#define NETIF__UDP_SEND                           0x00000008UL
-#define NETIF__RAWIP_RECV                         0x00000010UL
-#define NETIF__RAWIP_SEND                         0x00000020UL
-#define NETIF__DCCP_RECV                          0x00000040UL
-#define NETIF__DCCP_SEND                          0x00000080UL
-#define NETIF__INGRESS                            0x00000100UL
-#define NETIF__EGRESS                             0x00000200UL
-#define NETLINK_SOCKET__IOCTL                     0x00000001UL
-#define NETLINK_SOCKET__READ                      0x00000002UL
-#define NETLINK_SOCKET__WRITE                     0x00000004UL
-#define NETLINK_SOCKET__CREATE                    0x00000008UL
-#define NETLINK_SOCKET__GETATTR                   0x00000010UL
-#define NETLINK_SOCKET__SETATTR                   0x00000020UL
-#define NETLINK_SOCKET__LOCK                      0x00000040UL
-#define NETLINK_SOCKET__RELABELFROM               0x00000080UL
-#define NETLINK_SOCKET__RELABELTO                 0x00000100UL
-#define NETLINK_SOCKET__APPEND                    0x00000200UL
-#define NETLINK_SOCKET__BIND                      0x00000400UL
-#define NETLINK_SOCKET__CONNECT                   0x00000800UL
-#define NETLINK_SOCKET__LISTEN                    0x00001000UL
-#define NETLINK_SOCKET__ACCEPT                    0x00002000UL
-#define NETLINK_SOCKET__GETOPT                    0x00004000UL
-#define NETLINK_SOCKET__SETOPT                    0x00008000UL
-#define NETLINK_SOCKET__SHUTDOWN                  0x00010000UL
-#define NETLINK_SOCKET__RECVFROM                  0x00020000UL
-#define NETLINK_SOCKET__SENDTO                    0x00040000UL
-#define NETLINK_SOCKET__RECV_MSG                  0x00080000UL
-#define NETLINK_SOCKET__SEND_MSG                  0x00100000UL
-#define NETLINK_SOCKET__NAME_BIND                 0x00200000UL
-#define PACKET_SOCKET__IOCTL                      0x00000001UL
-#define PACKET_SOCKET__READ                       0x00000002UL
-#define PACKET_SOCKET__WRITE                      0x00000004UL
-#define PACKET_SOCKET__CREATE                     0x00000008UL
-#define PACKET_SOCKET__GETATTR                    0x00000010UL
-#define PACKET_SOCKET__SETATTR                    0x00000020UL
-#define PACKET_SOCKET__LOCK                       0x00000040UL
-#define PACKET_SOCKET__RELABELFROM                0x00000080UL
-#define PACKET_SOCKET__RELABELTO                  0x00000100UL
-#define PACKET_SOCKET__APPEND                     0x00000200UL
-#define PACKET_SOCKET__BIND                       0x00000400UL
-#define PACKET_SOCKET__CONNECT                    0x00000800UL
-#define PACKET_SOCKET__LISTEN                     0x00001000UL
-#define PACKET_SOCKET__ACCEPT                     0x00002000UL
-#define PACKET_SOCKET__GETOPT                     0x00004000UL
-#define PACKET_SOCKET__SETOPT                     0x00008000UL
-#define PACKET_SOCKET__SHUTDOWN                   0x00010000UL
-#define PACKET_SOCKET__RECVFROM                   0x00020000UL
-#define PACKET_SOCKET__SENDTO                     0x00040000UL
-#define PACKET_SOCKET__RECV_MSG                   0x00080000UL
-#define PACKET_SOCKET__SEND_MSG                   0x00100000UL
-#define PACKET_SOCKET__NAME_BIND                  0x00200000UL
-#define KEY_SOCKET__IOCTL                         0x00000001UL
-#define KEY_SOCKET__READ                          0x00000002UL
-#define KEY_SOCKET__WRITE                         0x00000004UL
-#define KEY_SOCKET__CREATE                        0x00000008UL
-#define KEY_SOCKET__GETATTR                       0x00000010UL
-#define KEY_SOCKET__SETATTR                       0x00000020UL
-#define KEY_SOCKET__LOCK                          0x00000040UL
-#define KEY_SOCKET__RELABELFROM                   0x00000080UL
-#define KEY_SOCKET__RELABELTO                     0x00000100UL
-#define KEY_SOCKET__APPEND                        0x00000200UL
-#define KEY_SOCKET__BIND                          0x00000400UL
-#define KEY_SOCKET__CONNECT                       0x00000800UL
-#define KEY_SOCKET__LISTEN                        0x00001000UL
-#define KEY_SOCKET__ACCEPT                        0x00002000UL
-#define KEY_SOCKET__GETOPT                        0x00004000UL
-#define KEY_SOCKET__SETOPT                        0x00008000UL
-#define KEY_SOCKET__SHUTDOWN                      0x00010000UL
-#define KEY_SOCKET__RECVFROM                      0x00020000UL
-#define KEY_SOCKET__SENDTO                        0x00040000UL
-#define KEY_SOCKET__RECV_MSG                      0x00080000UL
-#define KEY_SOCKET__SEND_MSG                      0x00100000UL
-#define KEY_SOCKET__NAME_BIND                     0x00200000UL
-#define UNIX_STREAM_SOCKET__IOCTL                 0x00000001UL
-#define UNIX_STREAM_SOCKET__READ                  0x00000002UL
-#define UNIX_STREAM_SOCKET__WRITE                 0x00000004UL
-#define UNIX_STREAM_SOCKET__CREATE                0x00000008UL
-#define UNIX_STREAM_SOCKET__GETATTR               0x00000010UL
-#define UNIX_STREAM_SOCKET__SETATTR               0x00000020UL
-#define UNIX_STREAM_SOCKET__LOCK                  0x00000040UL
-#define UNIX_STREAM_SOCKET__RELABELFROM           0x00000080UL
-#define UNIX_STREAM_SOCKET__RELABELTO             0x00000100UL
-#define UNIX_STREAM_SOCKET__APPEND                0x00000200UL
-#define UNIX_STREAM_SOCKET__BIND                  0x00000400UL
-#define UNIX_STREAM_SOCKET__CONNECT               0x00000800UL
-#define UNIX_STREAM_SOCKET__LISTEN                0x00001000UL
-#define UNIX_STREAM_SOCKET__ACCEPT                0x00002000UL
-#define UNIX_STREAM_SOCKET__GETOPT                0x00004000UL
-#define UNIX_STREAM_SOCKET__SETOPT                0x00008000UL
-#define UNIX_STREAM_SOCKET__SHUTDOWN              0x00010000UL
-#define UNIX_STREAM_SOCKET__RECVFROM              0x00020000UL
-#define UNIX_STREAM_SOCKET__SENDTO                0x00040000UL
-#define UNIX_STREAM_SOCKET__RECV_MSG              0x00080000UL
-#define UNIX_STREAM_SOCKET__SEND_MSG              0x00100000UL
-#define UNIX_STREAM_SOCKET__NAME_BIND             0x00200000UL
-#define UNIX_STREAM_SOCKET__CONNECTTO             0x00400000UL
-#define UNIX_STREAM_SOCKET__NEWCONN               0x00800000UL
-#define UNIX_STREAM_SOCKET__ACCEPTFROM            0x01000000UL
-#define UNIX_DGRAM_SOCKET__IOCTL                  0x00000001UL
-#define UNIX_DGRAM_SOCKET__READ                   0x00000002UL
-#define UNIX_DGRAM_SOCKET__WRITE                  0x00000004UL
-#define UNIX_DGRAM_SOCKET__CREATE                 0x00000008UL
-#define UNIX_DGRAM_SOCKET__GETATTR                0x00000010UL
-#define UNIX_DGRAM_SOCKET__SETATTR                0x00000020UL
-#define UNIX_DGRAM_SOCKET__LOCK                   0x00000040UL
-#define UNIX_DGRAM_SOCKET__RELABELFROM            0x00000080UL
-#define UNIX_DGRAM_SOCKET__RELABELTO              0x00000100UL
-#define UNIX_DGRAM_SOCKET__APPEND                 0x00000200UL
-#define UNIX_DGRAM_SOCKET__BIND                   0x00000400UL
-#define UNIX_DGRAM_SOCKET__CONNECT                0x00000800UL
-#define UNIX_DGRAM_SOCKET__LISTEN                 0x00001000UL
-#define UNIX_DGRAM_SOCKET__ACCEPT                 0x00002000UL
-#define UNIX_DGRAM_SOCKET__GETOPT                 0x00004000UL
-#define UNIX_DGRAM_SOCKET__SETOPT                 0x00008000UL
-#define UNIX_DGRAM_SOCKET__SHUTDOWN               0x00010000UL
-#define UNIX_DGRAM_SOCKET__RECVFROM               0x00020000UL
-#define UNIX_DGRAM_SOCKET__SENDTO                 0x00040000UL
-#define UNIX_DGRAM_SOCKET__RECV_MSG               0x00080000UL
-#define UNIX_DGRAM_SOCKET__SEND_MSG               0x00100000UL
-#define UNIX_DGRAM_SOCKET__NAME_BIND              0x00200000UL
-#define TUN_SOCKET__IOCTL                         0x00000001UL
-#define TUN_SOCKET__READ                          0x00000002UL
-#define TUN_SOCKET__WRITE                         0x00000004UL
-#define TUN_SOCKET__CREATE                        0x00000008UL
-#define TUN_SOCKET__GETATTR                       0x00000010UL
-#define TUN_SOCKET__SETATTR                       0x00000020UL
-#define TUN_SOCKET__LOCK                          0x00000040UL
-#define TUN_SOCKET__RELABELFROM                   0x00000080UL
-#define TUN_SOCKET__RELABELTO                     0x00000100UL
-#define TUN_SOCKET__APPEND                        0x00000200UL
-#define TUN_SOCKET__BIND                          0x00000400UL
-#define TUN_SOCKET__CONNECT                       0x00000800UL
-#define TUN_SOCKET__LISTEN                        0x00001000UL
-#define TUN_SOCKET__ACCEPT                        0x00002000UL
-#define TUN_SOCKET__GETOPT                        0x00004000UL
-#define TUN_SOCKET__SETOPT                        0x00008000UL
-#define TUN_SOCKET__SHUTDOWN                      0x00010000UL
-#define TUN_SOCKET__RECVFROM                      0x00020000UL
-#define TUN_SOCKET__SENDTO                        0x00040000UL
-#define TUN_SOCKET__RECV_MSG                      0x00080000UL
-#define TUN_SOCKET__SEND_MSG                      0x00100000UL
-#define TUN_SOCKET__NAME_BIND                     0x00200000UL
-#define PROCESS__FORK                             0x00000001UL
-#define PROCESS__TRANSITION                       0x00000002UL
-#define PROCESS__SIGCHLD                          0x00000004UL
-#define PROCESS__SIGKILL                          0x00000008UL
-#define PROCESS__SIGSTOP                          0x00000010UL
-#define PROCESS__SIGNULL                          0x00000020UL
-#define PROCESS__SIGNAL                           0x00000040UL
-#define PROCESS__PTRACE                           0x00000080UL
-#define PROCESS__GETSCHED                         0x00000100UL
-#define PROCESS__SETSCHED                         0x00000200UL
-#define PROCESS__GETSESSION                       0x00000400UL
-#define PROCESS__GETPGID                          0x00000800UL
-#define PROCESS__SETPGID                          0x00001000UL
-#define PROCESS__GETCAP                           0x00002000UL
-#define PROCESS__SETCAP                           0x00004000UL
-#define PROCESS__SHARE                            0x00008000UL
-#define PROCESS__GETATTR                          0x00010000UL
-#define PROCESS__SETEXEC                          0x00020000UL
-#define PROCESS__SETFSCREATE                      0x00040000UL
-#define PROCESS__NOATSECURE                       0x00080000UL
-#define PROCESS__SIGINH                           0x00100000UL
-#define PROCESS__SETRLIMIT                        0x00200000UL
-#define PROCESS__RLIMITINH                        0x00400000UL
-#define PROCESS__DYNTRANSITION                    0x00800000UL
-#define PROCESS__SETCURRENT                       0x01000000UL
-#define PROCESS__EXECMEM                          0x02000000UL
-#define PROCESS__EXECSTACK                        0x04000000UL
-#define PROCESS__EXECHEAP                         0x08000000UL
-#define PROCESS__SETKEYCREATE                     0x10000000UL
-#define PROCESS__SETSOCKCREATE                    0x20000000UL
-#define IPC__CREATE                               0x00000001UL
-#define IPC__DESTROY                              0x00000002UL
-#define IPC__GETATTR                              0x00000004UL
-#define IPC__SETATTR                              0x00000008UL
-#define IPC__READ                                 0x00000010UL
-#define IPC__WRITE                                0x00000020UL
-#define IPC__ASSOCIATE                            0x00000040UL
-#define IPC__UNIX_READ                            0x00000080UL
-#define IPC__UNIX_WRITE                           0x00000100UL
-#define SEM__CREATE                               0x00000001UL
-#define SEM__DESTROY                              0x00000002UL
-#define SEM__GETATTR                              0x00000004UL
-#define SEM__SETATTR                              0x00000008UL
-#define SEM__READ                                 0x00000010UL
-#define SEM__WRITE                                0x00000020UL
-#define SEM__ASSOCIATE                            0x00000040UL
-#define SEM__UNIX_READ                            0x00000080UL
-#define SEM__UNIX_WRITE                           0x00000100UL
-#define MSGQ__CREATE                              0x00000001UL
-#define MSGQ__DESTROY                             0x00000002UL
-#define MSGQ__GETATTR                             0x00000004UL
-#define MSGQ__SETATTR                             0x00000008UL
-#define MSGQ__READ                                0x00000010UL
-#define MSGQ__WRITE                               0x00000020UL
-#define MSGQ__ASSOCIATE                           0x00000040UL
-#define MSGQ__UNIX_READ                           0x00000080UL
-#define MSGQ__UNIX_WRITE                          0x00000100UL
-#define MSGQ__ENQUEUE                             0x00000200UL
-#define MSG__SEND                                 0x00000001UL
-#define MSG__RECEIVE                              0x00000002UL
-#define SHM__CREATE                               0x00000001UL
-#define SHM__DESTROY                              0x00000002UL
-#define SHM__GETATTR                              0x00000004UL
-#define SHM__SETATTR                              0x00000008UL
-#define SHM__READ                                 0x00000010UL
-#define SHM__WRITE                                0x00000020UL
-#define SHM__ASSOCIATE                            0x00000040UL
-#define SHM__UNIX_READ                            0x00000080UL
-#define SHM__UNIX_WRITE                           0x00000100UL
-#define SHM__LOCK                                 0x00000200UL
-#define SECURITY__COMPUTE_AV                      0x00000001UL
-#define SECURITY__COMPUTE_CREATE                  0x00000002UL
-#define SECURITY__COMPUTE_MEMBER                  0x00000004UL
-#define SECURITY__CHECK_CONTEXT                   0x00000008UL
-#define SECURITY__LOAD_POLICY                     0x00000010UL
-#define SECURITY__COMPUTE_RELABEL                 0x00000020UL
-#define SECURITY__COMPUTE_USER                    0x00000040UL
-#define SECURITY__SETENFORCE                      0x00000080UL
-#define SECURITY__SETBOOL                         0x00000100UL
-#define SECURITY__SETSECPARAM                     0x00000200UL
-#define SECURITY__SETCHECKREQPROT                 0x00000400UL
-#define SYSTEM__IPC_INFO                          0x00000001UL
-#define SYSTEM__SYSLOG_READ                       0x00000002UL
-#define SYSTEM__SYSLOG_MOD                        0x00000004UL
-#define SYSTEM__SYSLOG_CONSOLE                    0x00000008UL
-#define SYSTEM__MODULE_REQUEST                    0x00000010UL
-#define CAPABILITY__CHOWN                         0x00000001UL
-#define CAPABILITY__DAC_OVERRIDE                  0x00000002UL
-#define CAPABILITY__DAC_READ_SEARCH               0x00000004UL
-#define CAPABILITY__FOWNER                        0x00000008UL
-#define CAPABILITY__FSETID                        0x00000010UL
-#define CAPABILITY__KILL                          0x00000020UL
-#define CAPABILITY__SETGID                        0x00000040UL
-#define CAPABILITY__SETUID                        0x00000080UL
-#define CAPABILITY__SETPCAP                       0x00000100UL
-#define CAPABILITY__LINUX_IMMUTABLE               0x00000200UL
-#define CAPABILITY__NET_BIND_SERVICE              0x00000400UL
-#define CAPABILITY__NET_BROADCAST                 0x00000800UL
-#define CAPABILITY__NET_ADMIN                     0x00001000UL
-#define CAPABILITY__NET_RAW                       0x00002000UL
-#define CAPABILITY__IPC_LOCK                      0x00004000UL
-#define CAPABILITY__IPC_OWNER                     0x00008000UL
-#define CAPABILITY__SYS_MODULE                    0x00010000UL
-#define CAPABILITY__SYS_RAWIO                     0x00020000UL
-#define CAPABILITY__SYS_CHROOT                    0x00040000UL
-#define CAPABILITY__SYS_PTRACE                    0x00080000UL
-#define CAPABILITY__SYS_PACCT                     0x00100000UL
-#define CAPABILITY__SYS_ADMIN                     0x00200000UL
-#define CAPABILITY__SYS_BOOT                      0x00400000UL
-#define CAPABILITY__SYS_NICE                      0x00800000UL
-#define CAPABILITY__SYS_RESOURCE                  0x01000000UL
-#define CAPABILITY__SYS_TIME                      0x02000000UL
-#define CAPABILITY__SYS_TTY_CONFIG                0x04000000UL
-#define CAPABILITY__MKNOD                         0x08000000UL
-#define CAPABILITY__LEASE                         0x10000000UL
-#define CAPABILITY__AUDIT_WRITE                   0x20000000UL
-#define CAPABILITY__AUDIT_CONTROL                 0x40000000UL
-#define CAPABILITY__SETFCAP                       0x80000000UL
-#define CAPABILITY2__MAC_OVERRIDE                 0x00000001UL
-#define CAPABILITY2__MAC_ADMIN                    0x00000002UL
-#define NETLINK_ROUTE_SOCKET__IOCTL               0x00000001UL
-#define NETLINK_ROUTE_SOCKET__READ                0x00000002UL
-#define NETLINK_ROUTE_SOCKET__WRITE               0x00000004UL
-#define NETLINK_ROUTE_SOCKET__CREATE              0x00000008UL
-#define NETLINK_ROUTE_SOCKET__GETATTR             0x00000010UL
-#define NETLINK_ROUTE_SOCKET__SETATTR             0x00000020UL
-#define NETLINK_ROUTE_SOCKET__LOCK                0x00000040UL
-#define NETLINK_ROUTE_SOCKET__RELABELFROM         0x00000080UL
-#define NETLINK_ROUTE_SOCKET__RELABELTO           0x00000100UL
-#define NETLINK_ROUTE_SOCKET__APPEND              0x00000200UL
-#define NETLINK_ROUTE_SOCKET__BIND                0x00000400UL
-#define NETLINK_ROUTE_SOCKET__CONNECT             0x00000800UL
-#define NETLINK_ROUTE_SOCKET__LISTEN              0x00001000UL
-#define NETLINK_ROUTE_SOCKET__ACCEPT              0x00002000UL
-#define NETLINK_ROUTE_SOCKET__GETOPT              0x00004000UL
-#define NETLINK_ROUTE_SOCKET__SETOPT              0x00008000UL
-#define NETLINK_ROUTE_SOCKET__SHUTDOWN            0x00010000UL
-#define NETLINK_ROUTE_SOCKET__RECVFROM            0x00020000UL
-#define NETLINK_ROUTE_SOCKET__SENDTO              0x00040000UL
-#define NETLINK_ROUTE_SOCKET__RECV_MSG            0x00080000UL
-#define NETLINK_ROUTE_SOCKET__SEND_MSG            0x00100000UL
-#define NETLINK_ROUTE_SOCKET__NAME_BIND           0x00200000UL
-#define NETLINK_ROUTE_SOCKET__NLMSG_READ          0x00400000UL
-#define NETLINK_ROUTE_SOCKET__NLMSG_WRITE         0x00800000UL
-#define NETLINK_FIREWALL_SOCKET__IOCTL            0x00000001UL
-#define NETLINK_FIREWALL_SOCKET__READ             0x00000002UL
-#define NETLINK_FIREWALL_SOCKET__WRITE            0x00000004UL
-#define NETLINK_FIREWALL_SOCKET__CREATE           0x00000008UL
-#define NETLINK_FIREWALL_SOCKET__GETATTR          0x00000010UL
-#define NETLINK_FIREWALL_SOCKET__SETATTR          0x00000020UL
-#define NETLINK_FIREWALL_SOCKET__LOCK             0x00000040UL
-#define NETLINK_FIREWALL_SOCKET__RELABELFROM      0x00000080UL
-#define NETLINK_FIREWALL_SOCKET__RELABELTO        0x00000100UL
-#define NETLINK_FIREWALL_SOCKET__APPEND           0x00000200UL
-#define NETLINK_FIREWALL_SOCKET__BIND             0x00000400UL
-#define NETLINK_FIREWALL_SOCKET__CONNECT          0x00000800UL
-#define NETLINK_FIREWALL_SOCKET__LISTEN           0x00001000UL
-#define NETLINK_FIREWALL_SOCKET__ACCEPT           0x00002000UL
-#define NETLINK_FIREWALL_SOCKET__GETOPT           0x00004000UL
-#define NETLINK_FIREWALL_SOCKET__SETOPT           0x00008000UL
-#define NETLINK_FIREWALL_SOCKET__SHUTDOWN         0x00010000UL
-#define NETLINK_FIREWALL_SOCKET__RECVFROM         0x00020000UL
-#define NETLINK_FIREWALL_SOCKET__SENDTO           0x00040000UL
-#define NETLINK_FIREWALL_SOCKET__RECV_MSG         0x00080000UL
-#define NETLINK_FIREWALL_SOCKET__SEND_MSG         0x00100000UL
-#define NETLINK_FIREWALL_SOCKET__NAME_BIND        0x00200000UL
-#define NETLINK_FIREWALL_SOCKET__NLMSG_READ       0x00400000UL
-#define NETLINK_FIREWALL_SOCKET__NLMSG_WRITE      0x00800000UL
-#define NETLINK_TCPDIAG_SOCKET__IOCTL             0x00000001UL
-#define NETLINK_TCPDIAG_SOCKET__READ              0x00000002UL
-#define NETLINK_TCPDIAG_SOCKET__WRITE             0x00000004UL
-#define NETLINK_TCPDIAG_SOCKET__CREATE            0x00000008UL
-#define NETLINK_TCPDIAG_SOCKET__GETATTR           0x00000010UL
-#define NETLINK_TCPDIAG_SOCKET__SETATTR           0x00000020UL
-#define NETLINK_TCPDIAG_SOCKET__LOCK              0x00000040UL
-#define NETLINK_TCPDIAG_SOCKET__RELABELFROM       0x00000080UL
-#define NETLINK_TCPDIAG_SOCKET__RELABELTO         0x00000100UL
-#define NETLINK_TCPDIAG_SOCKET__APPEND            0x00000200UL
-#define NETLINK_TCPDIAG_SOCKET__BIND              0x00000400UL
-#define NETLINK_TCPDIAG_SOCKET__CONNECT           0x00000800UL
-#define NETLINK_TCPDIAG_SOCKET__LISTEN            0x00001000UL
-#define NETLINK_TCPDIAG_SOCKET__ACCEPT            0x00002000UL
-#define NETLINK_TCPDIAG_SOCKET__GETOPT            0x00004000UL
-#define NETLINK_TCPDIAG_SOCKET__SETOPT            0x00008000UL
-#define NETLINK_TCPDIAG_SOCKET__SHUTDOWN          0x00010000UL
-#define NETLINK_TCPDIAG_SOCKET__RECVFROM          0x00020000UL
-#define NETLINK_TCPDIAG_SOCKET__SENDTO            0x00040000UL
-#define NETLINK_TCPDIAG_SOCKET__RECV_MSG          0x00080000UL
-#define NETLINK_TCPDIAG_SOCKET__SEND_MSG          0x00100000UL
-#define NETLINK_TCPDIAG_SOCKET__NAME_BIND         0x00200000UL
-#define NETLINK_TCPDIAG_SOCKET__NLMSG_READ        0x00400000UL
-#define NETLINK_TCPDIAG_SOCKET__NLMSG_WRITE       0x00800000UL
-#define NETLINK_NFLOG_SOCKET__IOCTL               0x00000001UL
-#define NETLINK_NFLOG_SOCKET__READ                0x00000002UL
-#define NETLINK_NFLOG_SOCKET__WRITE               0x00000004UL
-#define NETLINK_NFLOG_SOCKET__CREATE              0x00000008UL
-#define NETLINK_NFLOG_SOCKET__GETATTR             0x00000010UL
-#define NETLINK_NFLOG_SOCKET__SETATTR             0x00000020UL
-#define NETLINK_NFLOG_SOCKET__LOCK                0x00000040UL
-#define NETLINK_NFLOG_SOCKET__RELABELFROM         0x00000080UL
-#define NETLINK_NFLOG_SOCKET__RELABELTO           0x00000100UL
-#define NETLINK_NFLOG_SOCKET__APPEND              0x00000200UL
-#define NETLINK_NFLOG_SOCKET__BIND                0x00000400UL
-#define NETLINK_NFLOG_SOCKET__CONNECT             0x00000800UL
-#define NETLINK_NFLOG_SOCKET__LISTEN              0x00001000UL
-#define NETLINK_NFLOG_SOCKET__ACCEPT              0x00002000UL
-#define NETLINK_NFLOG_SOCKET__GETOPT              0x00004000UL
-#define NETLINK_NFLOG_SOCKET__SETOPT              0x00008000UL
-#define NETLINK_NFLOG_SOCKET__SHUTDOWN            0x00010000UL
-#define NETLINK_NFLOG_SOCKET__RECVFROM            0x00020000UL
-#define NETLINK_NFLOG_SOCKET__SENDTO              0x00040000UL
-#define NETLINK_NFLOG_SOCKET__RECV_MSG            0x00080000UL
-#define NETLINK_NFLOG_SOCKET__SEND_MSG            0x00100000UL
-#define NETLINK_NFLOG_SOCKET__NAME_BIND           0x00200000UL
-#define NETLINK_XFRM_SOCKET__IOCTL                0x00000001UL
-#define NETLINK_XFRM_SOCKET__READ                 0x00000002UL
-#define NETLINK_XFRM_SOCKET__WRITE                0x00000004UL
-#define NETLINK_XFRM_SOCKET__CREATE               0x00000008UL
-#define NETLINK_XFRM_SOCKET__GETATTR              0x00000010UL
-#define NETLINK_XFRM_SOCKET__SETATTR              0x00000020UL
-#define NETLINK_XFRM_SOCKET__LOCK                 0x00000040UL
-#define NETLINK_XFRM_SOCKET__RELABELFROM          0x00000080UL
-#define NETLINK_XFRM_SOCKET__RELABELTO            0x00000100UL
-#define NETLINK_XFRM_SOCKET__APPEND               0x00000200UL
-#define NETLINK_XFRM_SOCKET__BIND                 0x00000400UL
-#define NETLINK_XFRM_SOCKET__CONNECT              0x00000800UL
-#define NETLINK_XFRM_SOCKET__LISTEN               0x00001000UL
-#define NETLINK_XFRM_SOCKET__ACCEPT               0x00002000UL
-#define NETLINK_XFRM_SOCKET__GETOPT               0x00004000UL
-#define NETLINK_XFRM_SOCKET__SETOPT               0x00008000UL
-#define NETLINK_XFRM_SOCKET__SHUTDOWN             0x00010000UL
-#define NETLINK_XFRM_SOCKET__RECVFROM             0x00020000UL
-#define NETLINK_XFRM_SOCKET__SENDTO               0x00040000UL
-#define NETLINK_XFRM_SOCKET__RECV_MSG             0x00080000UL
-#define NETLINK_XFRM_SOCKET__SEND_MSG             0x00100000UL
-#define NETLINK_XFRM_SOCKET__NAME_BIND            0x00200000UL
-#define NETLINK_XFRM_SOCKET__NLMSG_READ           0x00400000UL
-#define NETLINK_XFRM_SOCKET__NLMSG_WRITE          0x00800000UL
-#define NETLINK_SELINUX_SOCKET__IOCTL             0x00000001UL
-#define NETLINK_SELINUX_SOCKET__READ              0x00000002UL
-#define NETLINK_SELINUX_SOCKET__WRITE             0x00000004UL
-#define NETLINK_SELINUX_SOCKET__CREATE            0x00000008UL
-#define NETLINK_SELINUX_SOCKET__GETATTR           0x00000010UL
-#define NETLINK_SELINUX_SOCKET__SETATTR           0x00000020UL
-#define NETLINK_SELINUX_SOCKET__LOCK              0x00000040UL
-#define NETLINK_SELINUX_SOCKET__RELABELFROM       0x00000080UL
-#define NETLINK_SELINUX_SOCKET__RELABELTO         0x00000100UL
-#define NETLINK_SELINUX_SOCKET__APPEND            0x00000200UL
-#define NETLINK_SELINUX_SOCKET__BIND              0x00000400UL
-#define NETLINK_SELINUX_SOCKET__CONNECT           0x00000800UL
-#define NETLINK_SELINUX_SOCKET__LISTEN            0x00001000UL
-#define NETLINK_SELINUX_SOCKET__ACCEPT            0x00002000UL
-#define NETLINK_SELINUX_SOCKET__GETOPT            0x00004000UL
-#define NETLINK_SELINUX_SOCKET__SETOPT            0x00008000UL
-#define NETLINK_SELINUX_SOCKET__SHUTDOWN          0x00010000UL
-#define NETLINK_SELINUX_SOCKET__RECVFROM          0x00020000UL
-#define NETLINK_SELINUX_SOCKET__SENDTO            0x00040000UL
-#define NETLINK_SELINUX_SOCKET__RECV_MSG          0x00080000UL
-#define NETLINK_SELINUX_SOCKET__SEND_MSG          0x00100000UL
-#define NETLINK_SELINUX_SOCKET__NAME_BIND         0x00200000UL
-#define NETLINK_AUDIT_SOCKET__IOCTL               0x00000001UL
-#define NETLINK_AUDIT_SOCKET__READ                0x00000002UL
-#define NETLINK_AUDIT_SOCKET__WRITE               0x00000004UL
-#define NETLINK_AUDIT_SOCKET__CREATE              0x00000008UL
-#define NETLINK_AUDIT_SOCKET__GETATTR             0x00000010UL
-#define NETLINK_AUDIT_SOCKET__SETATTR             0x00000020UL
-#define NETLINK_AUDIT_SOCKET__LOCK                0x00000040UL
-#define NETLINK_AUDIT_SOCKET__RELABELFROM         0x00000080UL
-#define NETLINK_AUDIT_SOCKET__RELABELTO           0x00000100UL
-#define NETLINK_AUDIT_SOCKET__APPEND              0x00000200UL
-#define NETLINK_AUDIT_SOCKET__BIND                0x00000400UL
-#define NETLINK_AUDIT_SOCKET__CONNECT             0x00000800UL
-#define NETLINK_AUDIT_SOCKET__LISTEN              0x00001000UL
-#define NETLINK_AUDIT_SOCKET__ACCEPT              0x00002000UL
-#define NETLINK_AUDIT_SOCKET__GETOPT              0x00004000UL
-#define NETLINK_AUDIT_SOCKET__SETOPT              0x00008000UL
-#define NETLINK_AUDIT_SOCKET__SHUTDOWN            0x00010000UL
-#define NETLINK_AUDIT_SOCKET__RECVFROM            0x00020000UL
-#define NETLINK_AUDIT_SOCKET__SENDTO              0x00040000UL
-#define NETLINK_AUDIT_SOCKET__RECV_MSG            0x00080000UL
-#define NETLINK_AUDIT_SOCKET__SEND_MSG            0x00100000UL
-#define NETLINK_AUDIT_SOCKET__NAME_BIND           0x00200000UL
-#define NETLINK_AUDIT_SOCKET__NLMSG_READ          0x00400000UL
-#define NETLINK_AUDIT_SOCKET__NLMSG_WRITE         0x00800000UL
-#define NETLINK_AUDIT_SOCKET__NLMSG_RELAY         0x01000000UL
-#define NETLINK_AUDIT_SOCKET__NLMSG_READPRIV      0x02000000UL
-#define NETLINK_AUDIT_SOCKET__NLMSG_TTY_AUDIT     0x04000000UL
-#define NETLINK_IP6FW_SOCKET__IOCTL               0x00000001UL
-#define NETLINK_IP6FW_SOCKET__READ                0x00000002UL
-#define NETLINK_IP6FW_SOCKET__WRITE               0x00000004UL
-#define NETLINK_IP6FW_SOCKET__CREATE              0x00000008UL
-#define NETLINK_IP6FW_SOCKET__GETATTR             0x00000010UL
-#define NETLINK_IP6FW_SOCKET__SETATTR             0x00000020UL
-#define NETLINK_IP6FW_SOCKET__LOCK                0x00000040UL
-#define NETLINK_IP6FW_SOCKET__RELABELFROM         0x00000080UL
-#define NETLINK_IP6FW_SOCKET__RELABELTO           0x00000100UL
-#define NETLINK_IP6FW_SOCKET__APPEND              0x00000200UL
-#define NETLINK_IP6FW_SOCKET__BIND                0x00000400UL
-#define NETLINK_IP6FW_SOCKET__CONNECT             0x00000800UL
-#define NETLINK_IP6FW_SOCKET__LISTEN              0x00001000UL
-#define NETLINK_IP6FW_SOCKET__ACCEPT              0x00002000UL
-#define NETLINK_IP6FW_SOCKET__GETOPT              0x00004000UL
-#define NETLINK_IP6FW_SOCKET__SETOPT              0x00008000UL
-#define NETLINK_IP6FW_SOCKET__SHUTDOWN            0x00010000UL
-#define NETLINK_IP6FW_SOCKET__RECVFROM            0x00020000UL
-#define NETLINK_IP6FW_SOCKET__SENDTO              0x00040000UL
-#define NETLINK_IP6FW_SOCKET__RECV_MSG            0x00080000UL
-#define NETLINK_IP6FW_SOCKET__SEND_MSG            0x00100000UL
-#define NETLINK_IP6FW_SOCKET__NAME_BIND           0x00200000UL
-#define NETLINK_IP6FW_SOCKET__NLMSG_READ          0x00400000UL
-#define NETLINK_IP6FW_SOCKET__NLMSG_WRITE         0x00800000UL
-#define NETLINK_DNRT_SOCKET__IOCTL                0x00000001UL
-#define NETLINK_DNRT_SOCKET__READ                 0x00000002UL
-#define NETLINK_DNRT_SOCKET__WRITE                0x00000004UL
-#define NETLINK_DNRT_SOCKET__CREATE               0x00000008UL
-#define NETLINK_DNRT_SOCKET__GETATTR              0x00000010UL
-#define NETLINK_DNRT_SOCKET__SETATTR              0x00000020UL
-#define NETLINK_DNRT_SOCKET__LOCK                 0x00000040UL
-#define NETLINK_DNRT_SOCKET__RELABELFROM          0x00000080UL
-#define NETLINK_DNRT_SOCKET__RELABELTO            0x00000100UL
-#define NETLINK_DNRT_SOCKET__APPEND               0x00000200UL
-#define NETLINK_DNRT_SOCKET__BIND                 0x00000400UL
-#define NETLINK_DNRT_SOCKET__CONNECT              0x00000800UL
-#define NETLINK_DNRT_SOCKET__LISTEN               0x00001000UL
-#define NETLINK_DNRT_SOCKET__ACCEPT               0x00002000UL
-#define NETLINK_DNRT_SOCKET__GETOPT               0x00004000UL
-#define NETLINK_DNRT_SOCKET__SETOPT               0x00008000UL
-#define NETLINK_DNRT_SOCKET__SHUTDOWN             0x00010000UL
-#define NETLINK_DNRT_SOCKET__RECVFROM             0x00020000UL
-#define NETLINK_DNRT_SOCKET__SENDTO               0x00040000UL
-#define NETLINK_DNRT_SOCKET__RECV_MSG             0x00080000UL
-#define NETLINK_DNRT_SOCKET__SEND_MSG             0x00100000UL
-#define NETLINK_DNRT_SOCKET__NAME_BIND            0x00200000UL
-#define ASSOCIATION__SENDTO                       0x00000001UL
-#define ASSOCIATION__RECVFROM                     0x00000002UL
-#define ASSOCIATION__SETCONTEXT                   0x00000004UL
-#define ASSOCIATION__POLMATCH                     0x00000008UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__IOCTL      0x00000001UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__READ       0x00000002UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__WRITE      0x00000004UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__CREATE     0x00000008UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__GETATTR    0x00000010UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__SETATTR    0x00000020UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__LOCK       0x00000040UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__RELABELFROM 0x00000080UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__RELABELTO  0x00000100UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__APPEND     0x00000200UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__BIND       0x00000400UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__CONNECT    0x00000800UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__LISTEN     0x00001000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__ACCEPT     0x00002000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__GETOPT     0x00004000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__SETOPT     0x00008000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__SHUTDOWN   0x00010000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__RECVFROM   0x00020000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__SENDTO     0x00040000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__RECV_MSG   0x00080000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__SEND_MSG   0x00100000UL
-#define NETLINK_KOBJECT_UEVENT_SOCKET__NAME_BIND  0x00200000UL
-#define APPLETALK_SOCKET__IOCTL                   0x00000001UL
-#define APPLETALK_SOCKET__READ                    0x00000002UL
-#define APPLETALK_SOCKET__WRITE                   0x00000004UL
-#define APPLETALK_SOCKET__CREATE                  0x00000008UL
-#define APPLETALK_SOCKET__GETATTR                 0x00000010UL
-#define APPLETALK_SOCKET__SETATTR                 0x00000020UL
-#define APPLETALK_SOCKET__LOCK                    0x00000040UL
-#define APPLETALK_SOCKET__RELABELFROM             0x00000080UL
-#define APPLETALK_SOCKET__RELABELTO               0x00000100UL
-#define APPLETALK_SOCKET__APPEND                  0x00000200UL
-#define APPLETALK_SOCKET__BIND                    0x00000400UL
-#define APPLETALK_SOCKET__CONNECT                 0x00000800UL
-#define APPLETALK_SOCKET__LISTEN                  0x00001000UL
-#define APPLETALK_SOCKET__ACCEPT                  0x00002000UL
-#define APPLETALK_SOCKET__GETOPT                  0x00004000UL
-#define APPLETALK_SOCKET__SETOPT                  0x00008000UL
-#define APPLETALK_SOCKET__SHUTDOWN                0x00010000UL
-#define APPLETALK_SOCKET__RECVFROM                0x00020000UL
-#define APPLETALK_SOCKET__SENDTO                  0x00040000UL
-#define APPLETALK_SOCKET__RECV_MSG                0x00080000UL
-#define APPLETALK_SOCKET__SEND_MSG                0x00100000UL
-#define APPLETALK_SOCKET__NAME_BIND               0x00200000UL
-#define PACKET__SEND                              0x00000001UL
-#define PACKET__RECV                              0x00000002UL
-#define PACKET__RELABELTO                         0x00000004UL
-#define PACKET__FLOW_IN                           0x00000008UL
-#define PACKET__FLOW_OUT                          0x00000010UL
-#define PACKET__FORWARD_IN                        0x00000020UL
-#define PACKET__FORWARD_OUT                       0x00000040UL
-#define KEY__VIEW                                 0x00000001UL
-#define KEY__READ                                 0x00000002UL
-#define KEY__WRITE                                0x00000004UL
-#define KEY__SEARCH                               0x00000008UL
-#define KEY__LINK                                 0x00000010UL
-#define KEY__SETATTR                              0x00000020UL
-#define KEY__CREATE                               0x00000040UL
-#define DCCP_SOCKET__IOCTL                        0x00000001UL
-#define DCCP_SOCKET__READ                         0x00000002UL
-#define DCCP_SOCKET__WRITE                        0x00000004UL
-#define DCCP_SOCKET__CREATE                       0x00000008UL
-#define DCCP_SOCKET__GETATTR                      0x00000010UL
-#define DCCP_SOCKET__SETATTR                      0x00000020UL
-#define DCCP_SOCKET__LOCK                         0x00000040UL
-#define DCCP_SOCKET__RELABELFROM                  0x00000080UL
-#define DCCP_SOCKET__RELABELTO                    0x00000100UL
-#define DCCP_SOCKET__APPEND                       0x00000200UL
-#define DCCP_SOCKET__BIND                         0x00000400UL
-#define DCCP_SOCKET__CONNECT                      0x00000800UL
-#define DCCP_SOCKET__LISTEN                       0x00001000UL
-#define DCCP_SOCKET__ACCEPT                       0x00002000UL
-#define DCCP_SOCKET__GETOPT                       0x00004000UL
-#define DCCP_SOCKET__SETOPT                       0x00008000UL
-#define DCCP_SOCKET__SHUTDOWN                     0x00010000UL
-#define DCCP_SOCKET__RECVFROM                     0x00020000UL
-#define DCCP_SOCKET__SENDTO                       0x00040000UL
-#define DCCP_SOCKET__RECV_MSG                     0x00080000UL
-#define DCCP_SOCKET__SEND_MSG                     0x00100000UL
-#define DCCP_SOCKET__NAME_BIND                    0x00200000UL
-#define DCCP_SOCKET__NODE_BIND                    0x00400000UL
-#define DCCP_SOCKET__NAME_CONNECT                 0x00800000UL
-#define MEMPROTECT__MMAP_ZERO                     0x00000001UL
-#define PEER__RECV                                0x00000001UL
-#define KERNEL_SERVICE__USE_AS_OVERRIDE           0x00000001UL
-#define KERNEL_SERVICE__CREATE_FILES_AS           0x00000002UL
diff --git a/security/selinux/include/avc_ss.h b/security/selinux/include/avc_ss.h
index bb1ec80..4677aa5 100644
--- a/security/selinux/include/avc_ss.h
+++ b/security/selinux/include/avc_ss.h
@@ -10,26 +10,13 @@
 
 int avc_ss_reset(u32 seqno);
 
-struct av_perm_to_string {
-	u16 tclass;
-	u32 value;
+/* Class/perm mapping support */
+struct security_class_mapping {
 	const char *name;
+	const char *perms[sizeof(u32) * 8 + 1];
 };
 
-struct av_inherit {
-	const char **common_pts;
-	u32 common_base;
-	u16 tclass;
-};
-
-struct selinux_class_perm {
-	const struct av_perm_to_string *av_perm_to_string;
-	u32 av_pts_len;
-	u32 cts_len;
-	const char **class_to_string;
-	const struct av_inherit *av_inherit;
-	u32 av_inherit_len;
-};
+extern struct security_class_mapping secclass_map[];
 
 #endif /* _SELINUX_AVC_SS_H_ */
 
diff --git a/security/selinux/include/class_to_string.h b/security/selinux/include/class_to_string.h
deleted file mode 100644
index 7ab9299..0000000
--- a/security/selinux/include/class_to_string.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* This file is automatically generated.  Do not edit. */
-/*
- * Security object class definitions
- */
-    S_(NULL)
-    S_("security")
-    S_("process")
-    S_("system")
-    S_("capability")
-    S_("filesystem")
-    S_("file")
-    S_("dir")
-    S_("fd")
-    S_("lnk_file")
-    S_("chr_file")
-    S_("blk_file")
-    S_("sock_file")
-    S_("fifo_file")
-    S_("socket")
-    S_("tcp_socket")
-    S_("udp_socket")
-    S_("rawip_socket")
-    S_("node")
-    S_("netif")
-    S_("netlink_socket")
-    S_("packet_socket")
-    S_("key_socket")
-    S_("unix_stream_socket")
-    S_("unix_dgram_socket")
-    S_("sem")
-    S_("msg")
-    S_("msgq")
-    S_("shm")
-    S_("ipc")
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_("netlink_route_socket")
-    S_("netlink_firewall_socket")
-    S_("netlink_tcpdiag_socket")
-    S_("netlink_nflog_socket")
-    S_("netlink_xfrm_socket")
-    S_("netlink_selinux_socket")
-    S_("netlink_audit_socket")
-    S_("netlink_ip6fw_socket")
-    S_("netlink_dnrt_socket")
-    S_(NULL)
-    S_(NULL)
-    S_("association")
-    S_("netlink_kobject_uevent_socket")
-    S_("appletalk_socket")
-    S_("packet")
-    S_("key")
-    S_(NULL)
-    S_("dccp_socket")
-    S_("memprotect")
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_("peer")
-    S_("capability2")
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_(NULL)
-    S_("kernel_service")
-    S_("tun_socket")
diff --git a/security/selinux/include/classmap.h b/security/selinux/include/classmap.h
new file mode 100644
index 0000000..8b32e95
--- /dev/null
+++ b/security/selinux/include/classmap.h
@@ -0,0 +1,150 @@
+#define COMMON_FILE_SOCK_PERMS "ioctl", "read", "write", "create", \
+    "getattr", "setattr", "lock", "relabelfrom", "relabelto", "append"
+
+#define COMMON_FILE_PERMS COMMON_FILE_SOCK_PERMS, "unlink", "link", \
+    "rename", "execute", "swapon", "quotaon", "mounton"
+
+#define COMMON_SOCK_PERMS COMMON_FILE_SOCK_PERMS, "bind", "connect", \
+    "listen", "accept", "getopt", "setopt", "shutdown", "recvfrom",  \
+    "sendto", "recv_msg", "send_msg", "name_bind"
+
+#define COMMON_IPC_PERMS "create", "destroy", "getattr", "setattr", "read", \
+	    "write", "associate", "unix_read", "unix_write"
+
+struct security_class_mapping secclass_map[] = {
+	{ "security",
+	  { "compute_av", "compute_create", "compute_member",
+	    "check_context", "load_policy", "compute_relabel",
+	    "compute_user", "setenforce", "setbool", "setsecparam",
+	    "setcheckreqprot", NULL } },
+	{ "process",
+	  { "fork", "transition", "sigchld", "sigkill",
+	    "sigstop", "signull", "signal", "ptrace", "getsched", "setsched",
+	    "getsession", "getpgid", "setpgid", "getcap", "setcap", "share",
+	    "getattr", "setexec", "setfscreate", "noatsecure", "siginh",
+	    "setrlimit", "rlimitinh", "dyntransition", "setcurrent",
+	    "execmem", "execstack", "execheap", "setkeycreate",
+	    "setsockcreate", NULL } },
+	{ "system",
+	  { "ipc_info", "syslog_read", "syslog_mod",
+	    "syslog_console", "module_request", NULL } },
+	{ "capability",
+	  { "chown", "dac_override", "dac_read_search",
+	    "fowner", "fsetid", "kill", "setgid", "setuid", "setpcap",
+	    "linux_immutable", "net_bind_service", "net_broadcast",
+	    "net_admin", "net_raw", "ipc_lock", "ipc_owner", "sys_module",
+	    "sys_rawio", "sys_chroot", "sys_ptrace", "sys_pacct", "sys_admin",
+	    "sys_boot", "sys_nice", "sys_resource", "sys_time",
+	    "sys_tty_config", "mknod", "lease", "audit_write",
+	    "audit_control", "setfcap", NULL } },
+	{ "filesystem",
+	  { "mount", "remount", "unmount", "getattr",
+	    "relabelfrom", "relabelto", "transition", "associate", "quotamod",
+	    "quotaget", NULL } },
+	{ "file",
+	  { COMMON_FILE_PERMS,
+	    "execute_no_trans", "entrypoint", "execmod", "open", NULL } },
+	{ "dir",
+	  { COMMON_FILE_PERMS, "add_name", "remove_name",
+	    "reparent", "search", "rmdir", "open", NULL } },
+	{ "fd", { "use", NULL } },
+	{ "lnk_file",
+	  { COMMON_FILE_PERMS, NULL } },
+	{ "chr_file",
+	  { COMMON_FILE_PERMS,
+	    "execute_no_trans", "entrypoint", "execmod", "open", NULL } },
+	{ "blk_file",
+	  { COMMON_FILE_PERMS, "open", NULL } },
+	{ "sock_file",
+	  { COMMON_FILE_PERMS, "open", NULL } },
+	{ "fifo_file",
+	  { COMMON_FILE_PERMS, "open", NULL } },
+	{ "socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "tcp_socket",
+	  { COMMON_SOCK_PERMS,
+	    "connectto", "newconn", "acceptfrom", "node_bind", "name_connect",
+	    NULL } },
+	{ "udp_socket",
+	  { COMMON_SOCK_PERMS,
+	    "node_bind", NULL } },
+	{ "rawip_socket",
+	  { COMMON_SOCK_PERMS,
+	    "node_bind", NULL } },
+	{ "node",
+	  { "tcp_recv", "tcp_send", "udp_recv", "udp_send",
+	    "rawip_recv", "rawip_send", "enforce_dest",
+	    "dccp_recv", "dccp_send", "recvfrom", "sendto", NULL } },
+	{ "netif",
+	  {  "tcp_recv", "tcp_send", "udp_recv", "udp_send",
+	     "rawip_recv", "rawip_send", "dccp_recv", "dccp_send",
+	     "ingress", "egress", NULL } },
+	{ "netlink_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "packet_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "key_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "unix_stream_socket",
+	  { COMMON_SOCK_PERMS, "connectto", "newconn", "acceptfrom", NULL
+	  } },
+	{ "unix_dgram_socket",
+	  { COMMON_SOCK_PERMS, NULL
+	  } },
+	{ "sem",
+	  { COMMON_IPC_PERMS, NULL } },
+	{ "msg", { "send", "receive", NULL } },
+	{ "msgq",
+	  { COMMON_IPC_PERMS, "enqueue", NULL } },
+	{ "shm",
+	  { COMMON_IPC_PERMS, "lock", NULL } },
+	{ "ipc",
+	  { COMMON_IPC_PERMS, NULL } },
+	{ "netlink_route_socket",
+	  { COMMON_SOCK_PERMS,
+	    "nlmsg_read", "nlmsg_write", NULL } },
+	{ "netlink_firewall_socket",
+	  { COMMON_SOCK_PERMS,
+	    "nlmsg_read", "nlmsg_write", NULL } },
+	{ "netlink_tcpdiag_socket",
+	  { COMMON_SOCK_PERMS,
+	    "nlmsg_read", "nlmsg_write", NULL } },
+	{ "netlink_nflog_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "netlink_xfrm_socket",
+	  { COMMON_SOCK_PERMS,
+	    "nlmsg_read", "nlmsg_write", NULL } },
+	{ "netlink_selinux_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "netlink_audit_socket",
+	  { COMMON_SOCK_PERMS,
+	    "nlmsg_read", "nlmsg_write", "nlmsg_relay", "nlmsg_readpriv",
+	    "nlmsg_tty_audit", NULL } },
+	{ "netlink_ip6fw_socket",
+	  { COMMON_SOCK_PERMS,
+	    "nlmsg_read", "nlmsg_write", NULL } },
+	{ "netlink_dnrt_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "association",
+	  { "sendto", "recvfrom", "setcontext", "polmatch", NULL } },
+	{ "netlink_kobject_uevent_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "appletalk_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ "packet",
+	  { "send", "recv", "relabelto", "flow_in", "flow_out",
+	    "forward_in", "forward_out", NULL } },
+	{ "key",
+	  { "view", "read", "write", "search", "link", "setattr", "create",
+	    NULL } },
+	{ "dccp_socket",
+	  { COMMON_SOCK_PERMS,
+	    "node_bind", "name_connect", NULL } },
+	{ "memprotect", { "mmap_zero", NULL } },
+	{ "peer", { "recv", NULL } },
+	{ "capability2", { "mac_override", "mac_admin", NULL } },
+	{ "kernel_service", { "use_as_override", "create_files_as", NULL } },
+	{ "tun_socket",
+	  { COMMON_SOCK_PERMS, NULL } },
+	{ NULL }
+  };
diff --git a/security/selinux/include/common_perm_to_string.h b/security/selinux/include/common_perm_to_string.h
deleted file mode 100644
index ce5b6e2f..0000000
--- a/security/selinux/include/common_perm_to_string.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* This file is automatically generated.  Do not edit. */
-TB_(common_file_perm_to_string)
-    S_("ioctl")
-    S_("read")
-    S_("write")
-    S_("create")
-    S_("getattr")
-    S_("setattr")
-    S_("lock")
-    S_("relabelfrom")
-    S_("relabelto")
-    S_("append")
-    S_("unlink")
-    S_("link")
-    S_("rename")
-    S_("execute")
-    S_("swapon")
-    S_("quotaon")
-    S_("mounton")
-TE_(common_file_perm_to_string)
-
-TB_(common_socket_perm_to_string)
-    S_("ioctl")
-    S_("read")
-    S_("write")
-    S_("create")
-    S_("getattr")
-    S_("setattr")
-    S_("lock")
-    S_("relabelfrom")
-    S_("relabelto")
-    S_("append")
-    S_("bind")
-    S_("connect")
-    S_("listen")
-    S_("accept")
-    S_("getopt")
-    S_("setopt")
-    S_("shutdown")
-    S_("recvfrom")
-    S_("sendto")
-    S_("recv_msg")
-    S_("send_msg")
-    S_("name_bind")
-TE_(common_socket_perm_to_string)
-
-TB_(common_ipc_perm_to_string)
-    S_("create")
-    S_("destroy")
-    S_("getattr")
-    S_("setattr")
-    S_("read")
-    S_("write")
-    S_("associate")
-    S_("unix_read")
-    S_("unix_write")
-TE_(common_ipc_perm_to_string)
-
diff --git a/security/selinux/include/flask.h b/security/selinux/include/flask.h
deleted file mode 100644
index f248500..0000000
--- a/security/selinux/include/flask.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* This file is automatically generated.  Do not edit. */
-#ifndef _SELINUX_FLASK_H_
-#define _SELINUX_FLASK_H_
-
-/*
- * Security object class definitions
- */
-#define SECCLASS_SECURITY                                1
-#define SECCLASS_PROCESS                                 2
-#define SECCLASS_SYSTEM                                  3
-#define SECCLASS_CAPABILITY                              4
-#define SECCLASS_FILESYSTEM                              5
-#define SECCLASS_FILE                                    6
-#define SECCLASS_DIR                                     7
-#define SECCLASS_FD                                      8
-#define SECCLASS_LNK_FILE                                9
-#define SECCLASS_CHR_FILE                                10
-#define SECCLASS_BLK_FILE                                11
-#define SECCLASS_SOCK_FILE                               12
-#define SECCLASS_FIFO_FILE                               13
-#define SECCLASS_SOCKET                                  14
-#define SECCLASS_TCP_SOCKET                              15
-#define SECCLASS_UDP_SOCKET                              16
-#define SECCLASS_RAWIP_SOCKET                            17
-#define SECCLASS_NODE                                    18
-#define SECCLASS_NETIF                                   19
-#define SECCLASS_NETLINK_SOCKET                          20
-#define SECCLASS_PACKET_SOCKET                           21
-#define SECCLASS_KEY_SOCKET                              22
-#define SECCLASS_UNIX_STREAM_SOCKET                      23
-#define SECCLASS_UNIX_DGRAM_SOCKET                       24
-#define SECCLASS_SEM                                     25
-#define SECCLASS_MSG                                     26
-#define SECCLASS_MSGQ                                    27
-#define SECCLASS_SHM                                     28
-#define SECCLASS_IPC                                     29
-#define SECCLASS_NETLINK_ROUTE_SOCKET                    43
-#define SECCLASS_NETLINK_FIREWALL_SOCKET                 44
-#define SECCLASS_NETLINK_TCPDIAG_SOCKET                  45
-#define SECCLASS_NETLINK_NFLOG_SOCKET                    46
-#define SECCLASS_NETLINK_XFRM_SOCKET                     47
-#define SECCLASS_NETLINK_SELINUX_SOCKET                  48
-#define SECCLASS_NETLINK_AUDIT_SOCKET                    49
-#define SECCLASS_NETLINK_IP6FW_SOCKET                    50
-#define SECCLASS_NETLINK_DNRT_SOCKET                     51
-#define SECCLASS_ASSOCIATION                             54
-#define SECCLASS_NETLINK_KOBJECT_UEVENT_SOCKET           55
-#define SECCLASS_APPLETALK_SOCKET                        56
-#define SECCLASS_PACKET                                  57
-#define SECCLASS_KEY                                     58
-#define SECCLASS_DCCP_SOCKET                             60
-#define SECCLASS_MEMPROTECT                              61
-#define SECCLASS_PEER                                    68
-#define SECCLASS_CAPABILITY2                             69
-#define SECCLASS_KERNEL_SERVICE                          74
-#define SECCLASS_TUN_SOCKET                              75
-
-/*
- * Security identifier indices for initial entities
- */
-#define SECINITSID_KERNEL                               1
-#define SECINITSID_SECURITY                             2
-#define SECINITSID_UNLABELED                            3
-#define SECINITSID_FS                                   4
-#define SECINITSID_FILE                                 5
-#define SECINITSID_FILE_LABELS                          6
-#define SECINITSID_INIT                                 7
-#define SECINITSID_ANY_SOCKET                           8
-#define SECINITSID_PORT                                 9
-#define SECINITSID_NETIF                                10
-#define SECINITSID_NETMSG                               11
-#define SECINITSID_NODE                                 12
-#define SECINITSID_IGMP_PACKET                          13
-#define SECINITSID_ICMP_SOCKET                          14
-#define SECINITSID_TCP_SOCKET                           15
-#define SECINITSID_SYSCTL_MODPROBE                      16
-#define SECINITSID_SYSCTL                               17
-#define SECINITSID_SYSCTL_FS                            18
-#define SECINITSID_SYSCTL_KERNEL                        19
-#define SECINITSID_SYSCTL_NET                           20
-#define SECINITSID_SYSCTL_NET_UNIX                      21
-#define SECINITSID_SYSCTL_VM                            22
-#define SECINITSID_SYSCTL_DEV                           23
-#define SECINITSID_KMOD                                 24
-#define SECINITSID_POLICY                               25
-#define SECINITSID_SCMP_PACKET                          26
-#define SECINITSID_DEVNULL                              27
-
-#define SECINITSID_NUM                                  27
-
-#endif
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index ca83579..2553266 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -97,11 +97,18 @@
 #define AVD_FLAGS_PERMISSIVE	0x0001
 
 int security_compute_av(u32 ssid, u32 tsid,
-	u16 tclass, u32 requested,
-	struct av_decision *avd);
+			u16 tclass, u32 requested,
+			struct av_decision *avd);
+
+int security_compute_av_user(u32 ssid, u32 tsid,
+			     u16 tclass, u32 requested,
+			     struct av_decision *avd);
 
 int security_transition_sid(u32 ssid, u32 tsid,
-	u16 tclass, u32 *out_sid);
+			    u16 tclass, u32 *out_sid);
+
+int security_transition_sid_user(u32 ssid, u32 tsid,
+				 u16 tclass, u32 *out_sid);
 
 int security_member_sid(u32 ssid, u32 tsid,
 	u16 tclass, u32 *out_sid);
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index b4fc506..fab36fd 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -522,7 +522,7 @@
 	if (length < 0)
 		goto out2;
 
-	length = security_compute_av(ssid, tsid, tclass, req, &avd);
+	length = security_compute_av_user(ssid, tsid, tclass, req, &avd);
 	if (length < 0)
 		goto out2;
 
@@ -571,7 +571,7 @@
 	if (length < 0)
 		goto out2;
 
-	length = security_transition_sid(ssid, tsid, tclass, &newsid);
+	length = security_transition_sid_user(ssid, tsid, tclass, &newsid);
 	if (length < 0)
 		goto out2;
 
diff --git a/security/selinux/ss/Makefile b/security/selinux/ss/Makefile
index bad7877..15d4e62 100644
--- a/security/selinux/ss/Makefile
+++ b/security/selinux/ss/Makefile
@@ -2,7 +2,7 @@
 # Makefile for building the SELinux security server as part of the kernel tree.
 #
 
-EXTRA_CFLAGS += -Isecurity/selinux/include
+EXTRA_CFLAGS += -Isecurity/selinux -Isecurity/selinux/include
 obj-y := ss.o
 
 ss-y := ebitmap.o hashtab.o symtab.o sidtab.o avtab.o policydb.o services.o conditional.o mls.o
diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c
index b5407f1..3f2b270 100644
--- a/security/selinux/ss/mls.c
+++ b/security/selinux/ss/mls.c
@@ -532,7 +532,7 @@
 		}
 		/* Fallthrough */
 	case AVTAB_CHANGE:
-		if (tclass == SECCLASS_PROCESS)
+		if (tclass == policydb.process_class)
 			/* Use the process MLS attributes. */
 			return mls_context_cpy(newcontext, scontext);
 		else
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index 72e4a54..f036672 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -713,7 +713,6 @@
 			ebitmap_destroy(&p->type_attr_map[i]);
 	}
 	kfree(p->type_attr_map);
-	kfree(p->undefined_perms);
 	ebitmap_destroy(&p->policycaps);
 	ebitmap_destroy(&p->permissive_map);
 
@@ -1640,6 +1639,40 @@
 
 extern int ss_initialized;
 
+u16 string_to_security_class(struct policydb *p, const char *name)
+{
+	struct class_datum *cladatum;
+
+	cladatum = hashtab_search(p->p_classes.table, name);
+	if (!cladatum)
+		return 0;
+
+	return cladatum->value;
+}
+
+u32 string_to_av_perm(struct policydb *p, u16 tclass, const char *name)
+{
+	struct class_datum *cladatum;
+	struct perm_datum *perdatum = NULL;
+	struct common_datum *comdatum;
+
+	if (!tclass || tclass > p->p_classes.nprim)
+		return 0;
+
+	cladatum = p->class_val_to_struct[tclass-1];
+	comdatum = cladatum->comdatum;
+	if (comdatum)
+		perdatum = hashtab_search(comdatum->permissions.table,
+					  name);
+	if (!perdatum)
+		perdatum = hashtab_search(cladatum->permissions.table,
+					  name);
+	if (!perdatum)
+		return 0;
+
+	return 1U << (perdatum->value-1);
+}
+
 /*
  * Read the configuration data from a policy database binary
  * representation file into a policy database structure.
@@ -1861,6 +1894,16 @@
 	if (rc)
 		goto bad;
 
+	p->process_class = string_to_security_class(p, "process");
+	if (!p->process_class)
+		goto bad;
+	p->process_trans_perms = string_to_av_perm(p, p->process_class,
+						   "transition");
+	p->process_trans_perms |= string_to_av_perm(p, p->process_class,
+						    "dyntransition");
+	if (!p->process_trans_perms)
+		goto bad;
+
 	for (i = 0; i < info->ocon_num; i++) {
 		rc = next_entry(buf, fp, sizeof(u32));
 		if (rc < 0)
@@ -2101,7 +2144,7 @@
 					goto bad;
 				rt->target_class = le32_to_cpu(buf[0]);
 			} else
-				rt->target_class = SECCLASS_PROCESS;
+				rt->target_class = p->process_class;
 			if (!policydb_type_isvalid(p, rt->source_type) ||
 			    !policydb_type_isvalid(p, rt->target_type) ||
 			    !policydb_class_isvalid(p, rt->target_class)) {
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index 55152d4..cdcc570 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -254,7 +254,9 @@
 
 	unsigned int reject_unknown : 1;
 	unsigned int allow_unknown : 1;
-	u32 *undefined_perms;
+
+	u16 process_class;
+	u32 process_trans_perms;
 };
 
 extern void policydb_destroy(struct policydb *p);
@@ -295,5 +297,8 @@
 	return 0;
 }
 
+extern u16 string_to_security_class(struct policydb *p, const char *name);
+extern u32 string_to_av_perm(struct policydb *p, u16 tclass, const char *name);
+
 #endif	/* _SS_POLICYDB_H_ */
 
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index ff17820..d6bb20c 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -65,16 +65,10 @@
 #include "audit.h"
 
 extern void selnl_notify_policyload(u32 seqno);
-unsigned int policydb_loaded_version;
 
 int selinux_policycap_netpeer;
 int selinux_policycap_openperm;
 
-/*
- * This is declared in avc.c
- */
-extern const struct selinux_class_perm selinux_class_perm;
-
 static DEFINE_RWLOCK(policy_rwlock);
 
 static struct sidtab sidtab;
@@ -98,6 +92,165 @@
 				     u16 tclass,
 				     u32 requested,
 				     struct av_decision *avd);
+
+struct selinux_mapping {
+	u16 value; /* policy value */
+	unsigned num_perms;
+	u32 perms[sizeof(u32) * 8];
+};
+
+static struct selinux_mapping *current_mapping;
+static u16 current_mapping_size;
+
+static int selinux_set_mapping(struct policydb *pol,
+			       struct security_class_mapping *map,
+			       struct selinux_mapping **out_map_p,
+			       u16 *out_map_size)
+{
+	struct selinux_mapping *out_map = NULL;
+	size_t size = sizeof(struct selinux_mapping);
+	u16 i, j;
+	unsigned k;
+	bool print_unknown_handle = false;
+
+	/* Find number of classes in the input mapping */
+	if (!map)
+		return -EINVAL;
+	i = 0;
+	while (map[i].name)
+		i++;
+
+	/* Allocate space for the class records, plus one for class zero */
+	out_map = kcalloc(++i, size, GFP_ATOMIC);
+	if (!out_map)
+		return -ENOMEM;
+
+	/* Store the raw class and permission values */
+	j = 0;
+	while (map[j].name) {
+		struct security_class_mapping *p_in = map + (j++);
+		struct selinux_mapping *p_out = out_map + j;
+
+		/* An empty class string skips ahead */
+		if (!strcmp(p_in->name, "")) {
+			p_out->num_perms = 0;
+			continue;
+		}
+
+		p_out->value = string_to_security_class(pol, p_in->name);
+		if (!p_out->value) {
+			printk(KERN_INFO
+			       "SELinux:  Class %s not defined in policy.\n",
+			       p_in->name);
+			if (pol->reject_unknown)
+				goto err;
+			p_out->num_perms = 0;
+			print_unknown_handle = true;
+			continue;
+		}
+
+		k = 0;
+		while (p_in->perms && p_in->perms[k]) {
+			/* An empty permission string skips ahead */
+			if (!*p_in->perms[k]) {
+				k++;
+				continue;
+			}
+			p_out->perms[k] = string_to_av_perm(pol, p_out->value,
+							    p_in->perms[k]);
+			if (!p_out->perms[k]) {
+				printk(KERN_INFO
+				       "SELinux:  Permission %s in class %s not defined in policy.\n",
+				       p_in->perms[k], p_in->name);
+				if (pol->reject_unknown)
+					goto err;
+				print_unknown_handle = true;
+			}
+
+			k++;
+		}
+		p_out->num_perms = k;
+	}
+
+	if (print_unknown_handle)
+		printk(KERN_INFO "SELinux: the above unknown classes and permissions will be %s\n",
+		       pol->allow_unknown ? "allowed" : "denied");
+
+	*out_map_p = out_map;
+	*out_map_size = i;
+	return 0;
+err:
+	kfree(out_map);
+	return -EINVAL;
+}
+
+/*
+ * Get real, policy values from mapped values
+ */
+
+static u16 unmap_class(u16 tclass)
+{
+	if (tclass < current_mapping_size)
+		return current_mapping[tclass].value;
+
+	return tclass;
+}
+
+static u32 unmap_perm(u16 tclass, u32 tperm)
+{
+	if (tclass < current_mapping_size) {
+		unsigned i;
+		u32 kperm = 0;
+
+		for (i = 0; i < current_mapping[tclass].num_perms; i++)
+			if (tperm & (1<<i)) {
+				kperm |= current_mapping[tclass].perms[i];
+				tperm &= ~(1<<i);
+			}
+		return kperm;
+	}
+
+	return tperm;
+}
+
+static void map_decision(u16 tclass, struct av_decision *avd,
+			 int allow_unknown)
+{
+	if (tclass < current_mapping_size) {
+		unsigned i, n = current_mapping[tclass].num_perms;
+		u32 result;
+
+		for (i = 0, result = 0; i < n; i++) {
+			if (avd->allowed & current_mapping[tclass].perms[i])
+				result |= 1<<i;
+			if (allow_unknown && !current_mapping[tclass].perms[i])
+				result |= 1<<i;
+		}
+		avd->allowed = result;
+
+		for (i = 0, result = 0; i < n; i++)
+			if (avd->auditallow & current_mapping[tclass].perms[i])
+				result |= 1<<i;
+		avd->auditallow = result;
+
+		for (i = 0, result = 0; i < n; i++) {
+			if (avd->auditdeny & current_mapping[tclass].perms[i])
+				result |= 1<<i;
+			if (!allow_unknown && !current_mapping[tclass].perms[i])
+				result |= 1<<i;
+		}
+		/*
+		 * In case the kernel has a bug and requests a permission
+		 * between num_perms and the maximum permission number, we
+		 * should audit that denial
+		 */
+		for (; i < (sizeof(u32)*8); i++)
+			result |= 1<<i;
+		avd->auditdeny = result;
+	}
+}
+
+
 /*
  * Return the boolean value of a constraint expression
  * when it is applied to the specified source and target
@@ -467,21 +620,9 @@
 	struct class_datum *tclass_datum;
 	struct ebitmap *sattr, *tattr;
 	struct ebitmap_node *snode, *tnode;
-	const struct selinux_class_perm *kdefs = &selinux_class_perm;
 	unsigned int i, j;
 
 	/*
-	 * Remap extended Netlink classes for old policy versions.
-	 * Do this here rather than socket_type_to_security_class()
-	 * in case a newer policy version is loaded, allowing sockets
-	 * to remain in the correct class.
-	 */
-	if (policydb_loaded_version < POLICYDB_VERSION_NLCLASS)
-		if (tclass >= SECCLASS_NETLINK_ROUTE_SOCKET &&
-		    tclass <= SECCLASS_NETLINK_DNRT_SOCKET)
-			tclass = SECCLASS_NETLINK_SOCKET;
-
-	/*
 	 * Initialize the access vectors to the default values.
 	 */
 	avd->allowed = 0;
@@ -490,33 +631,11 @@
 	avd->seqno = latest_granting;
 	avd->flags = 0;
 
-	/*
-	 * Check for all the invalid cases.
-	 * - tclass 0
-	 * - tclass > policy and > kernel
-	 * - tclass > policy but is a userspace class
-	 * - tclass > policy but we do not allow unknowns
-	 */
-	if (unlikely(!tclass))
-		goto inval_class;
-	if (unlikely(tclass > policydb.p_classes.nprim))
-		if (tclass > kdefs->cts_len ||
-		    !kdefs->class_to_string[tclass] ||
-		    !policydb.allow_unknown)
-			goto inval_class;
-
-	/*
-	 * Kernel class and we allow unknown so pad the allow decision
-	 * the pad will be all 1 for unknown classes.
-	 */
-	if (tclass <= kdefs->cts_len && policydb.allow_unknown)
-		avd->allowed = policydb.undefined_perms[tclass - 1];
-
-	/*
-	 * Not in policy. Since decision is completed (all 1 or all 0) return.
-	 */
-	if (unlikely(tclass > policydb.p_classes.nprim))
-		return 0;
+	if (unlikely(!tclass || tclass > policydb.p_classes.nprim)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "SELinux:  Invalid class %hu\n", tclass);
+		return -EINVAL;
+	}
 
 	tclass_datum = policydb.class_val_to_struct[tclass - 1];
 
@@ -568,8 +687,8 @@
 	 * role is changing, then check the (current_role, new_role)
 	 * pair.
 	 */
-	if (tclass == SECCLASS_PROCESS &&
-	    (avd->allowed & (PROCESS__TRANSITION | PROCESS__DYNTRANSITION)) &&
+	if (tclass == policydb.process_class &&
+	    (avd->allowed & policydb.process_trans_perms) &&
 	    scontext->role != tcontext->role) {
 		for (ra = policydb.role_allow; ra; ra = ra->next) {
 			if (scontext->role == ra->role &&
@@ -577,8 +696,7 @@
 				break;
 		}
 		if (!ra)
-			avd->allowed &= ~(PROCESS__TRANSITION |
-					  PROCESS__DYNTRANSITION);
+			avd->allowed &= ~policydb.process_trans_perms;
 	}
 
 	/*
@@ -590,21 +708,6 @@
 				 tclass, requested, avd);
 
 	return 0;
-
-inval_class:
-	if (!tclass || tclass > kdefs->cts_len ||
-	    !kdefs->class_to_string[tclass]) {
-		if (printk_ratelimit())
-			printk(KERN_ERR "SELinux: %s:  unrecognized class %d\n",
-			       __func__, tclass);
-		return -EINVAL;
-	}
-
-	/*
-	 * Known to the kernel, but not to the policy.
-	 * Handle as a denial (allowed is 0).
-	 */
-	return 0;
 }
 
 static int security_validtrans_handle_fail(struct context *ocontext,
@@ -636,13 +739,14 @@
 }
 
 int security_validate_transition(u32 oldsid, u32 newsid, u32 tasksid,
-				 u16 tclass)
+				 u16 orig_tclass)
 {
 	struct context *ocontext;
 	struct context *ncontext;
 	struct context *tcontext;
 	struct class_datum *tclass_datum;
 	struct constraint_node *constraint;
+	u16 tclass;
 	int rc = 0;
 
 	if (!ss_initialized)
@@ -650,16 +754,7 @@
 
 	read_lock(&policy_rwlock);
 
-	/*
-	 * Remap extended Netlink classes for old policy versions.
-	 * Do this here rather than socket_type_to_security_class()
-	 * in case a newer policy version is loaded, allowing sockets
-	 * to remain in the correct class.
-	 */
-	if (policydb_loaded_version < POLICYDB_VERSION_NLCLASS)
-		if (tclass >= SECCLASS_NETLINK_ROUTE_SOCKET &&
-		    tclass <= SECCLASS_NETLINK_DNRT_SOCKET)
-			tclass = SECCLASS_NETLINK_SOCKET;
+	tclass = unmap_class(orig_tclass);
 
 	if (!tclass || tclass > policydb.p_classes.nprim) {
 		printk(KERN_ERR "SELinux: %s:  unrecognized class %d\n",
@@ -792,6 +887,38 @@
 }
 
 
+static int security_compute_av_core(u32 ssid,
+				    u32 tsid,
+				    u16 tclass,
+				    u32 requested,
+				    struct av_decision *avd)
+{
+	struct context *scontext = NULL, *tcontext = NULL;
+	int rc = 0;
+
+	scontext = sidtab_search(&sidtab, ssid);
+	if (!scontext) {
+		printk(KERN_ERR "SELinux: %s:  unrecognized SID %d\n",
+		       __func__, ssid);
+		return -EINVAL;
+	}
+	tcontext = sidtab_search(&sidtab, tsid);
+	if (!tcontext) {
+		printk(KERN_ERR "SELinux: %s:  unrecognized SID %d\n",
+		       __func__, tsid);
+		return -EINVAL;
+	}
+
+	rc = context_struct_compute_av(scontext, tcontext, tclass,
+				       requested, avd);
+
+	/* permissive domain? */
+	if (ebitmap_get_bit(&policydb.permissive_map, scontext->type))
+		avd->flags |= AVD_FLAGS_PERMISSIVE;
+
+	return rc;
+}
+
 /**
  * security_compute_av - Compute access vector decisions.
  * @ssid: source security identifier
@@ -807,12 +934,49 @@
  */
 int security_compute_av(u32 ssid,
 			u32 tsid,
-			u16 tclass,
-			u32 requested,
+			u16 orig_tclass,
+			u32 orig_requested,
 			struct av_decision *avd)
 {
-	struct context *scontext = NULL, *tcontext = NULL;
-	int rc = 0;
+	u16 tclass;
+	u32 requested;
+	int rc;
+
+	read_lock(&policy_rwlock);
+
+	if (!ss_initialized)
+		goto allow;
+
+	requested = unmap_perm(orig_tclass, orig_requested);
+	tclass = unmap_class(orig_tclass);
+	if (unlikely(orig_tclass && !tclass)) {
+		if (policydb.allow_unknown)
+			goto allow;
+		rc = -EINVAL;
+		goto out;
+	}
+	rc = security_compute_av_core(ssid, tsid, tclass, requested, avd);
+	map_decision(orig_tclass, avd, policydb.allow_unknown);
+out:
+	read_unlock(&policy_rwlock);
+	return rc;
+allow:
+	avd->allowed = 0xffffffff;
+	avd->auditallow = 0;
+	avd->auditdeny = 0xffffffff;
+	avd->seqno = latest_granting;
+	avd->flags = 0;
+	rc = 0;
+	goto out;
+}
+
+int security_compute_av_user(u32 ssid,
+			     u32 tsid,
+			     u16 tclass,
+			     u32 requested,
+			     struct av_decision *avd)
+{
+	int rc;
 
 	if (!ss_initialized) {
 		avd->allowed = 0xffffffff;
@@ -823,29 +987,7 @@
 	}
 
 	read_lock(&policy_rwlock);
-
-	scontext = sidtab_search(&sidtab, ssid);
-	if (!scontext) {
-		printk(KERN_ERR "SELinux: %s:  unrecognized SID %d\n",
-		       __func__, ssid);
-		rc = -EINVAL;
-		goto out;
-	}
-	tcontext = sidtab_search(&sidtab, tsid);
-	if (!tcontext) {
-		printk(KERN_ERR "SELinux: %s:  unrecognized SID %d\n",
-		       __func__, tsid);
-		rc = -EINVAL;
-		goto out;
-	}
-
-	rc = context_struct_compute_av(scontext, tcontext, tclass,
-				       requested, avd);
-
-	/* permissive domain? */
-	if (ebitmap_get_bit(&policydb.permissive_map, scontext->type))
-	    avd->flags |= AVD_FLAGS_PERMISSIVE;
-out:
+	rc = security_compute_av_core(ssid, tsid, tclass, requested, avd);
 	read_unlock(&policy_rwlock);
 	return rc;
 }
@@ -1204,20 +1346,22 @@
 
 static int security_compute_sid(u32 ssid,
 				u32 tsid,
-				u16 tclass,
+				u16 orig_tclass,
 				u32 specified,
-				u32 *out_sid)
+				u32 *out_sid,
+				bool kern)
 {
 	struct context *scontext = NULL, *tcontext = NULL, newcontext;
 	struct role_trans *roletr = NULL;
 	struct avtab_key avkey;
 	struct avtab_datum *avdatum;
 	struct avtab_node *node;
+	u16 tclass;
 	int rc = 0;
 
 	if (!ss_initialized) {
-		switch (tclass) {
-		case SECCLASS_PROCESS:
+		switch (orig_tclass) {
+		case SECCLASS_PROCESS: /* kernel value */
 			*out_sid = ssid;
 			break;
 		default:
@@ -1231,6 +1375,11 @@
 
 	read_lock(&policy_rwlock);
 
+	if (kern)
+		tclass = unmap_class(orig_tclass);
+	else
+		tclass = orig_tclass;
+
 	scontext = sidtab_search(&sidtab, ssid);
 	if (!scontext) {
 		printk(KERN_ERR "SELinux: %s:  unrecognized SID %d\n",
@@ -1260,13 +1409,11 @@
 	}
 
 	/* Set the role and type to default values. */
-	switch (tclass) {
-	case SECCLASS_PROCESS:
+	if (tclass == policydb.process_class) {
 		/* Use the current role and type of process. */
 		newcontext.role = scontext->role;
 		newcontext.type = scontext->type;
-		break;
-	default:
+	} else {
 		/* Use the well-defined object role. */
 		newcontext.role = OBJECT_R_VAL;
 		/* Use the type of the related object. */
@@ -1297,8 +1444,7 @@
 	}
 
 	/* Check for class-specific changes. */
-	switch (tclass) {
-	case SECCLASS_PROCESS:
+	if  (tclass == policydb.process_class) {
 		if (specified & AVTAB_TRANSITION) {
 			/* Look for a role transition rule. */
 			for (roletr = policydb.role_tr; roletr;
@@ -1311,9 +1457,6 @@
 				}
 			}
 		}
-		break;
-	default:
-		break;
 	}
 
 	/* Set the MLS attributes.
@@ -1358,7 +1501,17 @@
 			    u16 tclass,
 			    u32 *out_sid)
 {
-	return security_compute_sid(ssid, tsid, tclass, AVTAB_TRANSITION, out_sid);
+	return security_compute_sid(ssid, tsid, tclass, AVTAB_TRANSITION,
+				    out_sid, true);
+}
+
+int security_transition_sid_user(u32 ssid,
+				 u32 tsid,
+				 u16 tclass,
+				 u32 *out_sid)
+{
+	return security_compute_sid(ssid, tsid, tclass, AVTAB_TRANSITION,
+				    out_sid, false);
 }
 
 /**
@@ -1379,7 +1532,8 @@
 			u16 tclass,
 			u32 *out_sid)
 {
-	return security_compute_sid(ssid, tsid, tclass, AVTAB_MEMBER, out_sid);
+	return security_compute_sid(ssid, tsid, tclass, AVTAB_MEMBER, out_sid,
+				    false);
 }
 
 /**
@@ -1400,144 +1554,8 @@
 			u16 tclass,
 			u32 *out_sid)
 {
-	return security_compute_sid(ssid, tsid, tclass, AVTAB_CHANGE, out_sid);
-}
-
-/*
- * Verify that each kernel class that is defined in the
- * policy is correct
- */
-static int validate_classes(struct policydb *p)
-{
-	int i, j;
-	struct class_datum *cladatum;
-	struct perm_datum *perdatum;
-	u32 nprim, tmp, common_pts_len, perm_val, pol_val;
-	u16 class_val;
-	const struct selinux_class_perm *kdefs = &selinux_class_perm;
-	const char *def_class, *def_perm, *pol_class;
-	struct symtab *perms;
-	bool print_unknown_handle = 0;
-
-	if (p->allow_unknown) {
-		u32 num_classes = kdefs->cts_len;
-		p->undefined_perms = kcalloc(num_classes, sizeof(u32), GFP_KERNEL);
-		if (!p->undefined_perms)
-			return -ENOMEM;
-	}
-
-	for (i = 1; i < kdefs->cts_len; i++) {
-		def_class = kdefs->class_to_string[i];
-		if (!def_class)
-			continue;
-		if (i > p->p_classes.nprim) {
-			printk(KERN_INFO
-			       "SELinux:  class %s not defined in policy\n",
-			       def_class);
-			if (p->reject_unknown)
-				return -EINVAL;
-			if (p->allow_unknown)
-				p->undefined_perms[i-1] = ~0U;
-			print_unknown_handle = 1;
-			continue;
-		}
-		pol_class = p->p_class_val_to_name[i-1];
-		if (strcmp(pol_class, def_class)) {
-			printk(KERN_ERR
-			       "SELinux:  class %d is incorrect, found %s but should be %s\n",
-			       i, pol_class, def_class);
-			return -EINVAL;
-		}
-	}
-	for (i = 0; i < kdefs->av_pts_len; i++) {
-		class_val = kdefs->av_perm_to_string[i].tclass;
-		perm_val = kdefs->av_perm_to_string[i].value;
-		def_perm = kdefs->av_perm_to_string[i].name;
-		if (class_val > p->p_classes.nprim)
-			continue;
-		pol_class = p->p_class_val_to_name[class_val-1];
-		cladatum = hashtab_search(p->p_classes.table, pol_class);
-		BUG_ON(!cladatum);
-		perms = &cladatum->permissions;
-		nprim = 1 << (perms->nprim - 1);
-		if (perm_val > nprim) {
-			printk(KERN_INFO
-			       "SELinux:  permission %s in class %s not defined in policy\n",
-			       def_perm, pol_class);
-			if (p->reject_unknown)
-				return -EINVAL;
-			if (p->allow_unknown)
-				p->undefined_perms[class_val-1] |= perm_val;
-			print_unknown_handle = 1;
-			continue;
-		}
-		perdatum = hashtab_search(perms->table, def_perm);
-		if (perdatum == NULL) {
-			printk(KERN_ERR
-			       "SELinux:  permission %s in class %s not found in policy, bad policy\n",
-			       def_perm, pol_class);
-			return -EINVAL;
-		}
-		pol_val = 1 << (perdatum->value - 1);
-		if (pol_val != perm_val) {
-			printk(KERN_ERR
-			       "SELinux:  permission %s in class %s has incorrect value\n",
-			       def_perm, pol_class);
-			return -EINVAL;
-		}
-	}
-	for (i = 0; i < kdefs->av_inherit_len; i++) {
-		class_val = kdefs->av_inherit[i].tclass;
-		if (class_val > p->p_classes.nprim)
-			continue;
-		pol_class = p->p_class_val_to_name[class_val-1];
-		cladatum = hashtab_search(p->p_classes.table, pol_class);
-		BUG_ON(!cladatum);
-		if (!cladatum->comdatum) {
-			printk(KERN_ERR
-			       "SELinux:  class %s should have an inherits clause but does not\n",
-			       pol_class);
-			return -EINVAL;
-		}
-		tmp = kdefs->av_inherit[i].common_base;
-		common_pts_len = 0;
-		while (!(tmp & 0x01)) {
-			common_pts_len++;
-			tmp >>= 1;
-		}
-		perms = &cladatum->comdatum->permissions;
-		for (j = 0; j < common_pts_len; j++) {
-			def_perm = kdefs->av_inherit[i].common_pts[j];
-			if (j >= perms->nprim) {
-				printk(KERN_INFO
-				       "SELinux:  permission %s in class %s not defined in policy\n",
-				       def_perm, pol_class);
-				if (p->reject_unknown)
-					return -EINVAL;
-				if (p->allow_unknown)
-					p->undefined_perms[class_val-1] |= (1 << j);
-				print_unknown_handle = 1;
-				continue;
-			}
-			perdatum = hashtab_search(perms->table, def_perm);
-			if (perdatum == NULL) {
-				printk(KERN_ERR
-				       "SELinux:  permission %s in class %s not found in policy, bad policy\n",
-				       def_perm, pol_class);
-				return -EINVAL;
-			}
-			if (perdatum->value != j + 1) {
-				printk(KERN_ERR
-				       "SELinux:  permission %s in class %s has incorrect value\n",
-				       def_perm, pol_class);
-				return -EINVAL;
-			}
-		}
-	}
-	if (print_unknown_handle)
-		printk(KERN_INFO "SELinux: the above unknown classes and permissions will be %s\n",
-			(security_get_allow_unknown() ? "allowed" : "denied"));
-	return 0;
+	return security_compute_sid(ssid, tsid, tclass, AVTAB_CHANGE, out_sid,
+				    false);
 }
 
 /* Clone the SID into the new SID table. */
@@ -1710,8 +1728,10 @@
 {
 	struct policydb oldpolicydb, newpolicydb;
 	struct sidtab oldsidtab, newsidtab;
+	struct selinux_mapping *oldmap, *map = NULL;
 	struct convert_context_args args;
 	u32 seqno;
+	u16 map_size;
 	int rc = 0;
 	struct policy_file file = { data, len }, *fp = &file;
 
@@ -1721,22 +1741,19 @@
 			avtab_cache_destroy();
 			return -EINVAL;
 		}
+		if (selinux_set_mapping(&policydb, secclass_map,
+					&current_mapping,
+					&current_mapping_size)) {
+			policydb_destroy(&policydb);
+			avtab_cache_destroy();
+			return -EINVAL;
+		}
 		if (policydb_load_isids(&policydb, &sidtab)) {
 			policydb_destroy(&policydb);
 			avtab_cache_destroy();
 			return -EINVAL;
 		}
-		/* Verify that the kernel defined classes are correct. */
-		if (validate_classes(&policydb)) {
-			printk(KERN_ERR
-			       "SELinux:  the definition of a class is incorrect\n");
-			sidtab_destroy(&sidtab);
-			policydb_destroy(&policydb);
-			avtab_cache_destroy();
-			return -EINVAL;
-		}
 		security_load_policycaps();
-		policydb_loaded_version = policydb.policyvers;
 		ss_initialized = 1;
 		seqno = ++latest_granting;
 		selinux_complete_init();
@@ -1759,13 +1776,9 @@
 		return -ENOMEM;
 	}
 
-	/* Verify that the kernel defined classes are correct. */
-	if (validate_classes(&newpolicydb)) {
-		printk(KERN_ERR
-		       "SELinux:  the definition of a class is incorrect\n");
-		rc = -EINVAL;
+	if (selinux_set_mapping(&newpolicydb, secclass_map,
+				&map, &map_size))
 		goto err;
-	}
 
 	rc = security_preserve_bools(&newpolicydb);
 	if (rc) {
@@ -1799,13 +1812,16 @@
 	memcpy(&policydb, &newpolicydb, sizeof policydb);
 	sidtab_set(&sidtab, &newsidtab);
 	security_load_policycaps();
+	oldmap = current_mapping;
+	current_mapping = map;
+	current_mapping_size = map_size;
 	seqno = ++latest_granting;
-	policydb_loaded_version = policydb.policyvers;
 	write_unlock_irq(&policy_rwlock);
 
 	/* Free the old policydb and SID table. */
 	policydb_destroy(&oldpolicydb);
 	sidtab_destroy(&oldsidtab);
+	kfree(oldmap);
 
 	avc_ss_reset(seqno);
 	selnl_notify_policyload(seqno);
@@ -1815,6 +1831,7 @@
 	return 0;
 
 err:
+	kfree(map);
 	sidtab_destroy(&newsidtab);
 	policydb_destroy(&newpolicydb);
 	return rc;
@@ -2091,7 +2108,7 @@
 	}
 	for (i = 0, j = 0; i < mynel; i++) {
 		rc = avc_has_perm_noaudit(fromsid, mysids[i],
-					  SECCLASS_PROCESS,
+					  SECCLASS_PROCESS, /* kernel value */
 					  PROCESS__TRANSITION, AVC_STRICT,
 					  NULL);
 		if (!rc)
@@ -2119,10 +2136,11 @@
  */
 int security_genfs_sid(const char *fstype,
 		       char *path,
-		       u16 sclass,
+		       u16 orig_sclass,
 		       u32 *sid)
 {
 	int len;
+	u16 sclass;
 	struct genfs *genfs;
 	struct ocontext *c;
 	int rc = 0, cmp = 0;
@@ -2132,6 +2150,8 @@
 
 	read_lock(&policy_rwlock);
 
+	sclass = unmap_class(orig_sclass);
+
 	for (genfs = policydb.genfs; genfs; genfs = genfs->next) {
 		cmp = strcmp(fstype, genfs->fstype);
 		if (cmp <= 0)
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index c33b6bb..529c9ca 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -2602,7 +2602,7 @@
 #ifdef CONFIG_AUDIT
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
 	ad.a.u.net.family = sk->sk_family;
-	ad.a.u.net.netif = skb->iif;
+	ad.a.u.net.netif = skb->skb_iif;
 	ipv4_skb_to_auditdata(skb, &ad.a, NULL);
 #endif
 	/*
@@ -2757,7 +2757,7 @@
 #ifdef CONFIG_AUDIT
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
 	ad.a.u.net.family = family;
-	ad.a.u.net.netif = skb->iif;
+	ad.a.u.net.netif = skb->skb_iif;
 	ipv4_skb_to_auditdata(skb, &ad.a, NULL);
 #endif
 	/*
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index 3c8bd8e..e0d0354 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -187,6 +187,8 @@
 			    const s8 pattern_type, const s8 end_type,
 			    const char *function)
 {
+	const char *const start = filename;
+	bool in_repetition = false;
 	bool contains_pattern = false;
 	unsigned char c;
 	unsigned char d;
@@ -212,9 +214,13 @@
 		if (c == '/')
 			goto out;
 	}
-	while ((c = *filename++) != '\0') {
+	while (1) {
+		c = *filename++;
+		if (!c)
+			break;
 		if (c == '\\') {
-			switch ((c = *filename++)) {
+			c = *filename++;
+			switch (c) {
 			case '\\':  /* "\\" */
 				continue;
 			case '$':   /* "\$" */
@@ -231,6 +237,22 @@
 					break; /* Must not contain pattern */
 				contains_pattern = true;
 				continue;
+			case '{':   /* "/\{" */
+				if (filename - 3 < start ||
+				    *(filename - 3) != '/')
+					break;
+				if (pattern_type == -1)
+					break; /* Must not contain pattern */
+				contains_pattern = true;
+				in_repetition = true;
+				continue;
+			case '}':   /* "\}/" */
+				if (*filename != '/')
+					break;
+				if (!in_repetition)
+					break;
+				in_repetition = false;
+				continue;
 			case '0':   /* "\ooo" */
 			case '1':
 			case '2':
@@ -246,6 +268,8 @@
 					continue; /* pattern is not \000 */
 			}
 			goto out;
+		} else if (in_repetition && c == '/') {
+			goto out;
 		} else if (tomoyo_is_invalid(c)) {
 			goto out;
 		}
@@ -254,6 +278,8 @@
 		if (!contains_pattern)
 			goto out;
 	}
+	if (in_repetition)
+		goto out;
 	return true;
  out:
 	printk(KERN_DEBUG "%s: Invalid pathname '%s'\n", function,
@@ -360,33 +386,6 @@
 }
 
 /**
- * tomoyo_path_depth - Evaluate the number of '/' in a string.
- *
- * @pathname: The string to evaluate.
- *
- * Returns path depth of the string.
- *
- * I score 2 for each of the '/' in the @pathname
- * and score 1 if the @pathname ends with '/'.
- */
-static int tomoyo_path_depth(const char *pathname)
-{
-	int i = 0;
-
-	if (pathname) {
-		const char *ep = pathname + strlen(pathname);
-		if (pathname < ep--) {
-			if (*ep != '/')
-				i++;
-			while (pathname <= ep)
-				if (*ep-- == '/')
-					i += 2;
-		}
-	}
-	return i;
-}
-
-/**
  * tomoyo_const_part_length - Evaluate the initial length without a pattern in a token.
  *
  * @filename: The string to evaluate.
@@ -444,11 +443,10 @@
 	ptr->is_dir = len && (name[len - 1] == '/');
 	ptr->is_patterned = (ptr->const_len < len);
 	ptr->hash = full_name_hash(name, len);
-	ptr->depth = tomoyo_path_depth(name);
 }
 
 /**
- * tomoyo_file_matches_to_pattern2 - Pattern matching without '/' character
+ * tomoyo_file_matches_pattern2 - Pattern matching without '/' character
  * and "\-" pattern.
  *
  * @filename:     The start of string to check.
@@ -458,10 +456,10 @@
  *
  * Returns true if @filename matches @pattern, false otherwise.
  */
-static bool tomoyo_file_matches_to_pattern2(const char *filename,
-					    const char *filename_end,
-					    const char *pattern,
-					    const char *pattern_end)
+static bool tomoyo_file_matches_pattern2(const char *filename,
+					 const char *filename_end,
+					 const char *pattern,
+					 const char *pattern_end)
 {
 	while (filename < filename_end && pattern < pattern_end) {
 		char c;
@@ -519,7 +517,7 @@
 		case '*':
 		case '@':
 			for (i = 0; i <= filename_end - filename; i++) {
-				if (tomoyo_file_matches_to_pattern2(
+				if (tomoyo_file_matches_pattern2(
 						    filename + i, filename_end,
 						    pattern + 1, pattern_end))
 					return true;
@@ -550,7 +548,7 @@
 					j++;
 			}
 			for (i = 1; i <= j; i++) {
-				if (tomoyo_file_matches_to_pattern2(
+				if (tomoyo_file_matches_pattern2(
 						    filename + i, filename_end,
 						    pattern + 1, pattern_end))
 					return true;
@@ -567,7 +565,7 @@
 }
 
 /**
- * tomoyo_file_matches_to_pattern - Pattern matching without without '/' character.
+ * tomoyo_file_matches_pattern - Pattern matching without without '/' character.
  *
  * @filename:     The start of string to check.
  * @filename_end: The end of string to check.
@@ -576,7 +574,7 @@
  *
  * Returns true if @filename matches @pattern, false otherwise.
  */
-static bool tomoyo_file_matches_to_pattern(const char *filename,
+static bool tomoyo_file_matches_pattern(const char *filename,
 					   const char *filename_end,
 					   const char *pattern,
 					   const char *pattern_end)
@@ -589,10 +587,10 @@
 		/* Split at "\-" pattern. */
 		if (*pattern++ != '\\' || *pattern++ != '-')
 			continue;
-		result = tomoyo_file_matches_to_pattern2(filename,
-							 filename_end,
-							 pattern_start,
-							 pattern - 2);
+		result = tomoyo_file_matches_pattern2(filename,
+						      filename_end,
+						      pattern_start,
+						      pattern - 2);
 		if (first)
 			result = !result;
 		if (result)
@@ -600,64 +598,35 @@
 		first = false;
 		pattern_start = pattern;
 	}
-	result = tomoyo_file_matches_to_pattern2(filename, filename_end,
-						 pattern_start, pattern_end);
+	result = tomoyo_file_matches_pattern2(filename, filename_end,
+					      pattern_start, pattern_end);
 	return first ? result : !result;
 }
 
 /**
- * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern.
- * @filename: The filename to check.
- * @pattern:  The pattern to compare.
+ * tomoyo_path_matches_pattern2 - Do pathname pattern matching.
  *
- * Returns true if matches, false otherwise.
+ * @f: The start of string to check.
+ * @p: The start of pattern to compare.
  *
- * The following patterns are available.
- *   \\     \ itself.
- *   \ooo   Octal representation of a byte.
- *   \*     More than or equals to 0 character other than '/'.
- *   \@     More than or equals to 0 character other than '/' or '.'.
- *   \?     1 byte character other than '/'.
- *   \$     More than or equals to 1 decimal digit.
- *   \+     1 decimal digit.
- *   \X     More than or equals to 1 hexadecimal digit.
- *   \x     1 hexadecimal digit.
- *   \A     More than or equals to 1 alphabet character.
- *   \a     1 alphabet character.
- *   \-     Subtraction operator.
+ * Returns true if @f matches @p, false otherwise.
  */
-bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
-				 const struct tomoyo_path_info *pattern)
+static bool tomoyo_path_matches_pattern2(const char *f, const char *p)
 {
-	/*
-	  if (!filename || !pattern)
-	  return false;
-	*/
-	const char *f = filename->name;
-	const char *p = pattern->name;
-	const int len = pattern->const_len;
+	const char *f_delimiter;
+	const char *p_delimiter;
 
-	/* If @pattern doesn't contain pattern, I can use strcmp(). */
-	if (!pattern->is_patterned)
-		return !tomoyo_pathcmp(filename, pattern);
-	/* Dont compare if the number of '/' differs. */
-	if (filename->depth != pattern->depth)
-		return false;
-	/* Compare the initial length without patterns. */
-	if (strncmp(f, p, len))
-		return false;
-	f += len;
-	p += len;
-	/* Main loop. Compare each directory component. */
 	while (*f && *p) {
-		const char *f_delimiter = strchr(f, '/');
-		const char *p_delimiter = strchr(p, '/');
+		f_delimiter = strchr(f, '/');
 		if (!f_delimiter)
 			f_delimiter = f + strlen(f);
+		p_delimiter = strchr(p, '/');
 		if (!p_delimiter)
 			p_delimiter = p + strlen(p);
-		if (!tomoyo_file_matches_to_pattern(f, f_delimiter,
-						    p, p_delimiter))
+		if (*p == '\\' && *(p + 1) == '{')
+			goto recursive;
+		if (!tomoyo_file_matches_pattern(f, f_delimiter, p,
+						 p_delimiter))
 			return false;
 		f = f_delimiter;
 		if (*f)
@@ -671,6 +640,79 @@
 	       (*(p + 1) == '*' || *(p + 1) == '@'))
 		p += 2;
 	return !*f && !*p;
+ recursive:
+	/*
+	 * The "\{" pattern is permitted only after '/' character.
+	 * This guarantees that below "*(p - 1)" is safe.
+	 * Also, the "\}" pattern is permitted only before '/' character
+	 * so that "\{" + "\}" pair will not break the "\-" operator.
+	 */
+	if (*(p - 1) != '/' || p_delimiter <= p + 3 || *p_delimiter != '/' ||
+	    *(p_delimiter - 1) != '}' || *(p_delimiter - 2) != '\\')
+		return false; /* Bad pattern. */
+	do {
+		/* Compare current component with pattern. */
+		if (!tomoyo_file_matches_pattern(f, f_delimiter, p + 2,
+						 p_delimiter - 2))
+			break;
+		/* Proceed to next component. */
+		f = f_delimiter;
+		if (!*f)
+			break;
+		f++;
+		/* Continue comparison. */
+		if (tomoyo_path_matches_pattern2(f, p_delimiter + 1))
+			return true;
+		f_delimiter = strchr(f, '/');
+	} while (f_delimiter);
+	return false; /* Not matched. */
+}
+
+/**
+ * tomoyo_path_matches_pattern - Check whether the given filename matches the given pattern.
+ *
+ * @filename: The filename to check.
+ * @pattern:  The pattern to compare.
+ *
+ * Returns true if matches, false otherwise.
+ *
+ * The following patterns are available.
+ *   \\     \ itself.
+ *   \ooo   Octal representation of a byte.
+ *   \*     Zero or more repetitions of characters other than '/'.
+ *   \@     Zero or more repetitions of characters other than '/' or '.'.
+ *   \?     1 byte character other than '/'.
+ *   \$     One or more repetitions of decimal digits.
+ *   \+     1 decimal digit.
+ *   \X     One or more repetitions of hexadecimal digits.
+ *   \x     1 hexadecimal digit.
+ *   \A     One or more repetitions of alphabet characters.
+ *   \a     1 alphabet character.
+ *
+ *   \-     Subtraction operator.
+ *
+ *   /\{dir\}/   '/' + 'One or more repetitions of dir/' (e.g. /dir/ /dir/dir/
+ *               /dir/dir/dir/ ).
+ */
+bool tomoyo_path_matches_pattern(const struct tomoyo_path_info *filename,
+				 const struct tomoyo_path_info *pattern)
+{
+	const char *f = filename->name;
+	const char *p = pattern->name;
+	const int len = pattern->const_len;
+
+	/* If @pattern doesn't contain pattern, I can use strcmp(). */
+	if (!pattern->is_patterned)
+		return !tomoyo_pathcmp(filename, pattern);
+	/* Don't compare directory and non-directory. */
+	if (filename->is_dir != pattern->is_dir)
+		return false;
+	/* Compare the initial length without patterns. */
+	if (strncmp(f, p, len))
+		return false;
+	f += len;
+	p += len;
+	return tomoyo_path_matches_pattern2(f, p);
 }
 
 /**
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index 31df541..92169d2 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -56,9 +56,6 @@
  * (5) "is_patterned" is a bool which is true if "name" contains wildcard
  *     characters, false otherwise. This allows TOMOYO to use "hash" and
  *     strcmp() for string comparison if "is_patterned" is false.
- * (6) "depth" is calculated using the number of "/" characters in "name".
- *     This allows TOMOYO to avoid comparing two pathnames which never match
- *     (e.g. whether "/var/www/html/index.html" matches "/tmp/sh-thd-\$").
  */
 struct tomoyo_path_info {
 	const char *name;
@@ -66,7 +63,6 @@
 	u16 const_len;     /* = tomoyo_const_part_length(name)     */
 	bool is_dir;       /* = tomoyo_strendswith(name, "/")      */
 	bool is_patterned; /* = tomoyo_path_contains_pattern(name) */
-	u16 depth;         /* = tomoyo_path_depth(name)            */
 };
 
 /*
diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
index 5ae3a57..8346938 100644
--- a/security/tomoyo/file.c
+++ b/security/tomoyo/file.c
@@ -1096,27 +1096,6 @@
 }
 
 /**
- * tomoyo_check_file_perm - Check permission for sysctl()'s "read" and "write".
- *
- * @domain:    Pointer to "struct tomoyo_domain_info".
- * @filename:  Filename to check.
- * @perm:      Mode ("read" or "write" or "read/write").
- * Returns 0 on success, negative value otherwise.
- */
-int tomoyo_check_file_perm(struct tomoyo_domain_info *domain,
-			   const char *filename, const u8 perm)
-{
-	struct tomoyo_path_info name;
-	const u8 mode = tomoyo_check_flags(domain, TOMOYO_MAC_FOR_FILE);
-
-	if (!mode)
-		return 0;
-	name.name = filename;
-	tomoyo_fill_path_info(&name);
-	return tomoyo_check_file_perm2(domain, &name, perm, "sysctl", mode);
-}
-
-/**
  * tomoyo_check_exec_perm - Check permission for "execute".
  *
  * @domain:   Pointer to "struct tomoyo_domain_info".
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index 5f2e332..18369d49 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -13,6 +13,8 @@
 #include <linux/mount.h>
 #include <linux/mnt_namespace.h>
 #include <linux/fs_struct.h>
+#include <linux/hash.h>
+
 #include "common.h"
 #include "realpath.h"
 
@@ -108,6 +110,15 @@
 		spin_unlock(&dcache_lock);
 		path_put(&root);
 		path_put(&ns_root);
+		/* Prepend "/proc" prefix if using internal proc vfs mount. */
+		if (!IS_ERR(sp) && (path->mnt->mnt_parent == path->mnt) &&
+		    (strcmp(path->mnt->mnt_sb->s_type->name, "proc") == 0)) {
+			sp -= 5;
+			if (sp >= newname)
+				memcpy(sp, "/proc", 5);
+			else
+				sp = ERR_PTR(-ENOMEM);
+		}
 	}
 	if (IS_ERR(sp))
 		error = PTR_ERR(sp);
@@ -263,7 +274,8 @@
  * table. Frequency of appending strings is very low. So we don't need
  * large (e.g. 64k) hash size. 256 will be sufficient.
  */
-#define TOMOYO_MAX_HASH 256
+#define TOMOYO_HASH_BITS  8
+#define TOMOYO_MAX_HASH (1u<<TOMOYO_HASH_BITS)
 
 /*
  * tomoyo_name_entry is a structure which is used for linking
@@ -315,6 +327,7 @@
 	struct tomoyo_free_memory_block_list *fmb;
 	int len;
 	char *cp;
+	struct list_head *head;
 
 	if (!name)
 		return NULL;
@@ -325,9 +338,10 @@
 		return NULL;
 	}
 	hash = full_name_hash((const unsigned char *) name, len - 1);
+	head = &tomoyo_name_list[hash_long(hash, TOMOYO_HASH_BITS)];
+
 	mutex_lock(&lock);
-	list_for_each_entry(ptr, &tomoyo_name_list[hash % TOMOYO_MAX_HASH],
-			     list) {
+	list_for_each_entry(ptr, head, list) {
 		if (hash == ptr->entry.hash && !strcmp(name, ptr->entry.name))
 			goto out;
 	}
@@ -365,7 +379,7 @@
 	tomoyo_fill_path_info(&ptr->entry);
 	fmb->ptr += len;
 	fmb->len -= len;
-	list_add_tail(&ptr->list, &tomoyo_name_list[hash % TOMOYO_MAX_HASH]);
+	list_add_tail(&ptr->list, head);
 	if (fmb->len == 0) {
 		list_del(&fmb->list);
 		kfree(fmb);
diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c
index 9548a09..8a00ade 100644
--- a/security/tomoyo/tomoyo.c
+++ b/security/tomoyo/tomoyo.c
@@ -85,83 +85,6 @@
 	return tomoyo_check_open_permission(domain, &bprm->file->f_path, 1);
 }
 
-#ifdef CONFIG_SYSCTL
-
-static int tomoyo_prepend(char **buffer, int *buflen, const char *str)
-{
-	int namelen = strlen(str);
-
-	if (*buflen < namelen)
-		return -ENOMEM;
-	*buflen -= namelen;
-	*buffer -= namelen;
-	memcpy(*buffer, str, namelen);
-	return 0;
-}
-
-/**
- * tomoyo_sysctl_path - return the realpath of a ctl_table.
- * @table: pointer to "struct ctl_table".
- *
- * Returns realpath(3) of the @table on success.
- * Returns NULL on failure.
- *
- * This function uses tomoyo_alloc(), so the caller must call tomoyo_free()
- * if this function didn't return NULL.
- */
-static char *tomoyo_sysctl_path(struct ctl_table *table)
-{
-	int buflen = TOMOYO_MAX_PATHNAME_LEN;
-	char *buf = tomoyo_alloc(buflen);
-	char *end = buf + buflen;
-	int error = -ENOMEM;
-
-	if (!buf)
-		return NULL;
-
-	*--end = '\0';
-	buflen--;
-	while (table) {
-		char num[32];
-		const char *sp = table->procname;
-
-		if (!sp) {
-			memset(num, 0, sizeof(num));
-			snprintf(num, sizeof(num) - 1, "=%d=", table->ctl_name);
-			sp = num;
-		}
-		if (tomoyo_prepend(&end, &buflen, sp) ||
-		    tomoyo_prepend(&end, &buflen, "/"))
-			goto out;
-		table = table->parent;
-	}
-	if (tomoyo_prepend(&end, &buflen, "/proc/sys"))
-		goto out;
-	error = tomoyo_encode(buf, end - buf, end);
- out:
-	if (!error)
-		return buf;
-	tomoyo_free(buf);
-	return NULL;
-}
-
-static int tomoyo_sysctl(struct ctl_table *table, int op)
-{
-	int error;
-	char *name;
-
-	op &= MAY_READ | MAY_WRITE;
-	if (!op)
-		return 0;
-	name = tomoyo_sysctl_path(table);
-	if (!name)
-		return -ENOMEM;
-	error = tomoyo_check_file_perm(tomoyo_domain(), name, op);
-	tomoyo_free(name);
-	return error;
-}
-#endif
-
 static int tomoyo_path_truncate(struct path *path, loff_t length,
 				unsigned int time_attrs)
 {
@@ -282,9 +205,6 @@
 	.cred_transfer	     = tomoyo_cred_transfer,
 	.bprm_set_creds      = tomoyo_bprm_set_creds,
 	.bprm_check_security = tomoyo_bprm_check_security,
-#ifdef CONFIG_SYSCTL
-	.sysctl              = tomoyo_sysctl,
-#endif
 	.file_fcntl          = tomoyo_file_fcntl,
 	.dentry_open         = tomoyo_dentry_open,
 	.path_truncate       = tomoyo_path_truncate,
diff --git a/security/tomoyo/tomoyo.h b/security/tomoyo/tomoyo.h
index cd6ba0b..ed75832 100644
--- a/security/tomoyo/tomoyo.h
+++ b/security/tomoyo/tomoyo.h
@@ -18,8 +18,6 @@
 struct linux_binprm;
 struct pt_regs;
 
-int tomoyo_check_file_perm(struct tomoyo_domain_info *domain,
-			   const char *filename, const u8 perm);
 int tomoyo_check_exec_perm(struct tomoyo_domain_info *domain,
 			   const struct tomoyo_path_info *filename);
 int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
diff --git a/sound/Kconfig b/sound/Kconfig
index 439e15c..b3e53e6 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -58,7 +58,7 @@
 	  Please read Documentation/feature-removal-schedule.txt for
 	  details.
 
-	  If unusre, say Y.
+	  If unsure, say Y.
 
 source "sound/oss/dmasound/Kconfig"
 
diff --git a/sound/arm/Makefile b/sound/arm/Makefile
index 5a549ed..8c0c851 100644
--- a/sound/arm/Makefile
+++ b/sound/arm/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
-snd-aaci-objs			:= aaci.o devdma.o
+snd-aaci-objs			:= aaci.o
 
 obj-$(CONFIG_SND_PXA2XX_PCM)	+= snd-pxa2xx-pcm.o
 snd-pxa2xx-pcm-objs		:= pxa2xx-pcm.o
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 1f0f821..1497dce 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -18,10 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/amba/bus.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
+#include <linux/io.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -30,7 +27,6 @@
 #include <sound/pcm_params.h>
 
 #include "aaci.h"
-#include "devdma.h"
 
 #define DRIVER_NAME	"aaci-pl041"
 
@@ -492,7 +488,7 @@
 	/*
 	 * Clear out the DMA and any allocated buffers.
 	 */
-	devdma_hw_free(NULL, substream);
+	snd_pcm_lib_free_pages(substream);
 
 	return 0;
 }
@@ -504,21 +500,19 @@
 	int err;
 
 	aaci_pcm_hw_free(substream);
+	if (aacirun->pcm_open) {
+		snd_ac97_pcm_close(aacirun->pcm);
+		aacirun->pcm_open = 0;
+	}
 
-	err = devdma_hw_alloc(NULL, substream,
-			      params_buffer_bytes(params));
+	err = snd_pcm_lib_malloc_pages(substream,
+				       params_buffer_bytes(params));
 	if (err < 0)
 		goto out;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
-					params_channels(params),
-					aacirun->pcm->r[0].slots);
-	else
-		err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
-					params_channels(params),
-					aacirun->pcm->r[1].slots);
-
+	err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
+				params_channels(params),
+				aacirun->pcm->r[0].slots);
 	if (err)
 		goto out;
 
@@ -534,7 +528,7 @@
 	struct aaci_runtime *aacirun = runtime->private_data;
 
 	aacirun->start	= (void *)runtime->dma_area;
-	aacirun->end	= aacirun->start + runtime->dma_bytes;
+	aacirun->end	= aacirun->start + snd_pcm_lib_buffer_bytes(substream);
 	aacirun->ptr	= aacirun->start;
 	aacirun->period	=
 	aacirun->bytes	= frames_to_bytes(runtime, runtime->period_size);
@@ -551,11 +545,6 @@
 	return bytes_to_frames(runtime, bytes);
 }
 
-static int aaci_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma)
-{
-	return devdma_mmap(NULL, substream, vma);
-}
-
 
 /*
  * Playback specific ALSA stuff
@@ -722,7 +711,6 @@
 	.prepare	= aaci_pcm_prepare,
 	.trigger	= aaci_pcm_playback_trigger,
 	.pointer	= aaci_pcm_pointer,
-	.mmap		= aaci_pcm_mmap,
 };
 
 static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream,
@@ -850,7 +838,6 @@
 	.prepare	= aaci_pcm_capture_prepare,
 	.trigger	= aaci_pcm_capture_trigger,
 	.pointer	= aaci_pcm_pointer,
-	.mmap		= aaci_pcm_mmap,
 };
 
 /*
@@ -1040,6 +1027,8 @@
 
 		snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops);
 		snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops);
+		snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
+						      NULL, 0, 64 * 104);
 	}
 
 	return ret;
diff --git a/sound/arm/devdma.c b/sound/arm/devdma.c
deleted file mode 100644
index 9d1e666..0000000
--- a/sound/arm/devdma.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  linux/sound/arm/devdma.c
- *
- *  Copyright (C) 2003-2004 Russell King, All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM DMA shim for ALSA.
- */
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-
-#include "devdma.h"
-
-void devdma_hw_free(struct device *dev, struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct snd_dma_buffer *buf = runtime->dma_buffer_p;
-
-	if (runtime->dma_area == NULL)
-		return;
-
-	if (buf != &substream->dma_buffer) {
-		dma_free_coherent(buf->dev.dev, buf->bytes, buf->area, buf->addr);
-		kfree(runtime->dma_buffer_p);
-	}
-
-	snd_pcm_set_runtime_buffer(substream, NULL);
-}
-
-int devdma_hw_alloc(struct device *dev, struct snd_pcm_substream *substream, size_t size)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct snd_dma_buffer *buf = runtime->dma_buffer_p;
-	int ret = 0;
-
-	if (buf) {
-		if (buf->bytes >= size)
-			goto out;
-		devdma_hw_free(dev, substream);
-	}
-
-	if (substream->dma_buffer.area != NULL && substream->dma_buffer.bytes >= size) {
-		buf = &substream->dma_buffer;
-	} else {
-		buf = kmalloc(sizeof(struct snd_dma_buffer), GFP_KERNEL);
-		if (!buf)
-			goto nomem;
-
-		buf->dev.type = SNDRV_DMA_TYPE_DEV;
-		buf->dev.dev = dev;
-		buf->area = dma_alloc_coherent(dev, size, &buf->addr, GFP_KERNEL);
-		buf->bytes = size;
-		buf->private_data = NULL;
-
-		if (!buf->area)
-			goto free;
-	}
-	snd_pcm_set_runtime_buffer(substream, buf);
-	ret = 1;
- out:
-	runtime->dma_bytes = size;
-	return ret;
-
- free:
-	kfree(buf);
- nomem:
-	return -ENOMEM;
-}
-
-int devdma_mmap(struct device *dev, struct snd_pcm_substream *substream, struct vm_area_struct *vma)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	return dma_mmap_coherent(dev, vma, runtime->dma_area, runtime->dma_addr, runtime->dma_bytes);
-}
diff --git a/sound/arm/devdma.h b/sound/arm/devdma.h
deleted file mode 100644
index d025329..0000000
--- a/sound/arm/devdma.h
+++ /dev/null
@@ -1,3 +0,0 @@
-void devdma_hw_free(struct device *dev, struct snd_pcm_substream *substream);
-int devdma_hw_alloc(struct device *dev, struct snd_pcm_substream *substream, size_t size);
-int devdma_mmap(struct device *dev, struct snd_pcm_substream *substream, struct vm_area_struct *vma);
diff --git a/sound/core/control.c b/sound/core/control.c
index a8b7fab..268ab74 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -75,7 +75,7 @@
 	ctl->card = card;
 	ctl->prefer_pcm_subdevice = -1;
 	ctl->prefer_rawmidi_subdevice = -1;
-	ctl->pid = current->pid;
+	ctl->pid = get_pid(task_pid(current));
 	file->private_data = ctl;
 	write_lock_irqsave(&card->ctl_files_rwlock, flags);
 	list_add_tail(&ctl->list, &card->ctl_files);
@@ -125,6 +125,7 @@
 				control->vd[idx].owner = NULL;
 	up_write(&card->controls_rwsem);
 	snd_ctl_empty_read_queue(ctl);
+	put_pid(ctl->pid);
 	kfree(ctl);
 	module_put(card->module);
 	snd_card_file_remove(card, file);
@@ -672,7 +673,7 @@
 			info->access |= SNDRV_CTL_ELEM_ACCESS_LOCK;
 			if (vd->owner == ctl)
 				info->access |= SNDRV_CTL_ELEM_ACCESS_OWNER;
-			info->owner = vd->owner_pid;
+			info->owner = pid_vnr(vd->owner->pid);
 		} else {
 			info->owner = -1;
 		}
@@ -827,7 +828,6 @@
 			result = -EBUSY;
 		else {
 			vd->owner = file;
-			vd->owner_pid = current->pid;
 			result = 0;
 		}
 	}
@@ -858,7 +858,6 @@
 			result = -EPERM;
 		else {
 			vd->owner = NULL;
-			vd->owner_pid = 0;
 			result = 0;
 		}
 	}
@@ -1120,7 +1119,7 @@
 	    	goto __kctl_end;
 	}
 	if (vd->access & SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK) {
-		if (file && vd->owner != NULL && vd->owner != file) {
+		if (vd->owner != NULL && vd->owner != file) {
 			err = -EPERM;
 			goto __kctl_end;
 		}
diff --git a/sound/core/isadma.c b/sound/core/isadma.c
index 79f0f16..950e19b 100644
--- a/sound/core/isadma.c
+++ b/sound/core/isadma.c
@@ -85,16 +85,24 @@
 unsigned int snd_dma_pointer(unsigned long dma, unsigned int size)
 {
 	unsigned long flags;
-	unsigned int result;
+	unsigned int result, result1;
 
 	flags = claim_dma_lock();
 	clear_dma_ff(dma);
 	if (!isa_dma_bridge_buggy)
 		disable_dma(dma);
 	result = get_dma_residue(dma);
+	/*
+	 * HACK - read the counter again and choose higher value in order to
+	 * avoid reading during counter lower byte roll over if the
+	 * isa_dma_bridge_buggy is set.
+	 */
+	result1 = get_dma_residue(dma);
 	if (!isa_dma_bridge_buggy)
 		enable_dma(dma);
 	release_dma_lock(flags);
+	if (unlikely(result < result1))
+		result = result1;
 #ifdef CONFIG_SND_DEBUG
 	if (result > size)
 		snd_printk(KERN_ERR "pointer (0x%x) for DMA #%ld is greater than transfer size (0x%x)\n", result, dma, size);
diff --git a/sound/core/oss/mixer_oss.c b/sound/core/oss/mixer_oss.c
index 7724238..54e2eb5 100644
--- a/sound/core/oss/mixer_oss.c
+++ b/sound/core/oss/mixer_oss.c
@@ -1251,7 +1251,9 @@
 		{ SOUND_MIXER_SYNTH,	"FM",			0 }, /* fallback */
 		{ SOUND_MIXER_SYNTH,	"Music",		0 }, /* fallback */
 		{ SOUND_MIXER_PCM,	"PCM",			0 },
-		{ SOUND_MIXER_SPEAKER,	"PC Speaker", 		0 },
+		{ SOUND_MIXER_SPEAKER,	"Beep", 		0 },
+		{ SOUND_MIXER_SPEAKER,	"PC Speaker", 		0 }, /* fallback */
+		{ SOUND_MIXER_SPEAKER,	"Speaker", 		0 }, /* fallback */
 		{ SOUND_MIXER_LINE,	"Line", 		0 },
 		{ SOUND_MIXER_MIC,	"Mic", 			0 },
 		{ SOUND_MIXER_CD,	"CD", 			0 },
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index c69c60b..6884ae0 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -435,6 +435,7 @@
 		return;
 	}
 	snd_iprintf(buffer, "state: %s\n", snd_pcm_state_name(status.state));
+	snd_iprintf(buffer, "owner_pid   : %d\n", pid_vnr(substream->pid));
 	snd_iprintf(buffer, "trigger_time: %ld.%09ld\n",
 		status.trigger_tstamp.tv_sec, status.trigger_tstamp.tv_nsec);
 	snd_iprintf(buffer, "tstamp      : %ld.%09ld\n",
@@ -809,7 +810,7 @@
 	card = pcm->card;
 	read_lock(&card->ctl_files_rwlock);
 	list_for_each_entry(kctl, &card->ctl_files, list) {
-		if (kctl->pid == current->pid) {
+		if (kctl->pid == task_pid(current)) {
 			prefer_subdevice = kctl->prefer_pcm_subdevice;
 			if (prefer_subdevice != -1)
 				break;
@@ -900,6 +901,7 @@
 	substream->private_data = pcm->private_data;
 	substream->ref_count = 1;
 	substream->f_flags = file->f_flags;
+	substream->pid = get_pid(task_pid(current));
 	pstr->substream_opened++;
 	*rsubstream = substream;
 	return 0;
@@ -921,6 +923,8 @@
 	kfree(runtime->hw_constraints.rules);
 	kfree(runtime);
 	substream->runtime = NULL;
+	put_pid(substream->pid);
+	substream->pid = NULL;
 	substream->pstr->substream_opened--;
 }
 
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index ab73edf..29ab46a1 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -26,6 +26,7 @@
 #include <linux/time.h>
 #include <linux/pm_qos_params.h>
 #include <linux/uio.h>
+#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/info.h>
@@ -3061,6 +3062,27 @@
 }
 #endif /* coherent mmap */
 
+static inline struct page *
+snd_pcm_default_page_ops(struct snd_pcm_substream *substream, unsigned long ofs)
+{
+	void *vaddr = substream->runtime->dma_area + ofs;
+#if defined(CONFIG_MIPS) && defined(CONFIG_DMA_NONCOHERENT)
+	if (substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV)
+		return virt_to_page(CAC_ADDR(vaddr));
+#endif
+#if defined(CONFIG_PPC32) && defined(CONFIG_NOT_COHERENT_CACHE)
+	if (substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV) {
+		dma_addr_t addr = substream->runtime->dma_addr + ofs;
+		addr -= get_dma_offset(substream->dma_buffer.dev.dev);
+		/* assume dma_handle set via pfn_to_phys() in
+		 * mm/dma-noncoherent.c
+		 */
+		return pfn_to_page(addr >> PAGE_SHIFT);
+	}
+#endif
+	return virt_to_page(vaddr);
+}
+
 /*
  * fault callback for mmapping a RAM page
  */
@@ -3071,7 +3093,6 @@
 	struct snd_pcm_runtime *runtime;
 	unsigned long offset;
 	struct page * page;
-	void *vaddr;
 	size_t dma_bytes;
 	
 	if (substream == NULL)
@@ -3081,36 +3102,53 @@
 	dma_bytes = PAGE_ALIGN(runtime->dma_bytes);
 	if (offset > dma_bytes - PAGE_SIZE)
 		return VM_FAULT_SIGBUS;
-	if (substream->ops->page) {
+	if (substream->ops->page)
 		page = substream->ops->page(substream, offset);
-		if (!page)
-			return VM_FAULT_SIGBUS;
-	} else {
-		vaddr = runtime->dma_area + offset;
-		page = virt_to_page(vaddr);
-	}
+	else
+		page = snd_pcm_default_page_ops(substream, offset);
+	if (!page)
+		return VM_FAULT_SIGBUS;
 	get_page(page);
 	vmf->page = page;
 	return 0;
 }
 
-static const struct vm_operations_struct snd_pcm_vm_ops_data =
-{
+static const struct vm_operations_struct snd_pcm_vm_ops_data = {
+	.open =		snd_pcm_mmap_data_open,
+	.close =	snd_pcm_mmap_data_close,
+};
+
+static const struct vm_operations_struct snd_pcm_vm_ops_data_fault = {
 	.open =		snd_pcm_mmap_data_open,
 	.close =	snd_pcm_mmap_data_close,
 	.fault =	snd_pcm_mmap_data_fault,
 };
 
+#ifndef ARCH_HAS_DMA_MMAP_COHERENT
+/* This should be defined / handled globally! */
+#ifdef CONFIG_ARM
+#define ARCH_HAS_DMA_MMAP_COHERENT
+#endif
+#endif
+
 /*
  * mmap the DMA buffer on RAM
  */
 static int snd_pcm_default_mmap(struct snd_pcm_substream *substream,
 				struct vm_area_struct *area)
 {
-	area->vm_ops = &snd_pcm_vm_ops_data;
-	area->vm_private_data = substream;
 	area->vm_flags |= VM_RESERVED;
-	atomic_inc(&substream->mmap_count);
+#ifdef ARCH_HAS_DMA_MMAP_COHERENT
+	if (!substream->ops->page &&
+	    substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV)
+		return dma_mmap_coherent(substream->dma_buffer.dev.dev,
+					 area,
+					 substream->runtime->dma_area,
+					 substream->runtime->dma_addr,
+					 area->vm_end - area->vm_start);
+#endif /* ARCH_HAS_DMA_MMAP_COHERENT */
+	/* mmap with fault handler */
+	area->vm_ops = &snd_pcm_vm_ops_data_fault;
 	return 0;
 }
 
@@ -3118,12 +3156,6 @@
  * mmap the DMA buffer on I/O memory area
  */
 #if SNDRV_PCM_INFO_MMAP_IOMEM
-static const struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
-{
-	.open =		snd_pcm_mmap_data_open,
-	.close =	snd_pcm_mmap_data_close,
-};
-
 int snd_pcm_lib_mmap_iomem(struct snd_pcm_substream *substream,
 			   struct vm_area_struct *area)
 {
@@ -3133,8 +3165,6 @@
 #ifdef pgprot_noncached
 	area->vm_page_prot = pgprot_noncached(area->vm_page_prot);
 #endif
-	area->vm_ops = &snd_pcm_vm_ops_data_mmio;
-	area->vm_private_data = substream;
 	area->vm_flags |= VM_IO;
 	size = area->vm_end - area->vm_start;
 	offset = area->vm_pgoff << PAGE_SHIFT;
@@ -3142,7 +3172,6 @@
 				(substream->runtime->dma_addr + offset) >> PAGE_SHIFT,
 				size, area->vm_page_prot))
 		return -EAGAIN;
-	atomic_inc(&substream->mmap_count);
 	return 0;
 }
 
@@ -3159,6 +3188,7 @@
 	long size;
 	unsigned long offset;
 	size_t dma_bytes;
+	int err;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		if (!(area->vm_flags & (VM_WRITE|VM_READ)))
@@ -3183,10 +3213,15 @@
 	if (offset > dma_bytes - size)
 		return -EINVAL;
 
+	area->vm_ops = &snd_pcm_vm_ops_data;
+	area->vm_private_data = substream;
 	if (substream->ops->mmap)
-		return substream->ops->mmap(substream, area);
+		err = substream->ops->mmap(substream, area);
 	else
-		return snd_pcm_default_mmap(substream, area);
+		err = snd_pcm_default_mmap(substream, area);
+	if (!err)
+		atomic_inc(&substream->mmap_count);
+	return err;
 }
 
 EXPORT_SYMBOL(snd_pcm_mmap_data);
diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index 70d6f25..2f76612 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -242,8 +242,6 @@
 		return -ENXIO;
 	if (subdevice >= 0 && subdevice >= s->substream_count)
 		return -ENODEV;
-	if (s->substream_opened >= s->substream_count)
-		return -EAGAIN;
 
 	list_for_each_entry(substream, &s->substreams, list) {
 		if (substream->opened) {
@@ -280,9 +278,10 @@
 		substream->active_sensing = 0;
 		if (mode & SNDRV_RAWMIDI_LFLG_APPEND)
 			substream->append = 1;
+		substream->pid = get_pid(task_pid(current));
+		rmidi->streams[substream->stream].substream_opened++;
 	}
 	substream->use_count++;
-	rmidi->streams[substream->stream].substream_opened++;
 	return 0;
 }
 
@@ -413,7 +412,7 @@
 		subdevice = -1;
 		read_lock(&card->ctl_files_rwlock);
 		list_for_each_entry(kctl, &card->ctl_files, list) {
-			if (kctl->pid == current->pid) {
+			if (kctl->pid == task_pid(current)) {
 				subdevice = kctl->prefer_rawmidi_subdevice;
 				if (subdevice != -1)
 					break;
@@ -466,7 +465,6 @@
 			    struct snd_rawmidi_substream *substream,
 			    int cleanup)
 {
-	rmidi->streams[substream->stream].substream_opened--;
 	if (--substream->use_count)
 		return;
 
@@ -491,6 +489,9 @@
 	snd_rawmidi_runtime_free(substream);
 	substream->opened = 0;
 	substream->append = 0;
+	put_pid(substream->pid);
+	substream->pid = NULL;
+	rmidi->streams[substream->stream].substream_opened--;
 }
 
 static void rawmidi_release_priv(struct snd_rawmidi_file *rfile)
@@ -1338,6 +1339,9 @@
 				    substream->number,
 				    (unsigned long) substream->bytes);
 			if (substream->opened) {
+				snd_iprintf(buffer,
+				    "  Owner PID    : %d\n",
+				    pid_vnr(substream->pid));
 				runtime = substream->runtime;
 				snd_iprintf(buffer,
 				    "  Mode         : %s\n"
@@ -1359,6 +1363,9 @@
 				    substream->number,
 				    (unsigned long) substream->bytes);
 			if (substream->opened) {
+				snd_iprintf(buffer,
+					    "  Owner PID    : %d\n",
+					    pid_vnr(substream->pid));
 				runtime = substream->runtime;
 				snd_iprintf(buffer,
 					    "  Buffer size  : %lu\n"
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index b60cef2..f165c77 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -26,6 +26,7 @@
 static int index = SNDRV_DEFAULT_IDX1;	/* Index 0-MAX */
 static char *id = SNDRV_DEFAULT_STR1;	/* ID for this card */
 static int enable = SNDRV_DEFAULT_ENABLE1;	/* Enable this card */
+static int nopcm;	/* Disable PCM capability of the driver */
 
 module_param(index, int, 0444);
 MODULE_PARM_DESC(index, "Index value for pcsp soundcard.");
@@ -33,6 +34,8 @@
 MODULE_PARM_DESC(id, "ID string for pcsp soundcard.");
 module_param(enable, bool, 0444);
 MODULE_PARM_DESC(enable, "Enable PC-Speaker sound.");
+module_param(nopcm, bool, 0444);
+MODULE_PARM_DESC(nopcm, "Disable PC-Speaker PCM sound. Only beeps remain.");
 
 struct snd_pcsp pcsp_chip;
 
@@ -43,13 +46,16 @@
 	int err;
 	int div, min_div, order;
 
-	hrtimer_get_res(CLOCK_MONOTONIC, &tp);
-	if (tp.tv_sec || tp.tv_nsec > PCSP_MAX_PERIOD_NS) {
-		printk(KERN_ERR "PCSP: Timer resolution is not sufficient "
-		       "(%linS)\n", tp.tv_nsec);
-		printk(KERN_ERR "PCSP: Make sure you have HPET and ACPI "
-		       "enabled.\n");
-		return -EIO;
+	if (!nopcm) {
+		hrtimer_get_res(CLOCK_MONOTONIC, &tp);
+		if (tp.tv_sec || tp.tv_nsec > PCSP_MAX_PERIOD_NS) {
+			printk(KERN_ERR "PCSP: Timer resolution is not sufficient "
+				"(%linS)\n", tp.tv_nsec);
+			printk(KERN_ERR "PCSP: Make sure you have HPET and ACPI "
+				"enabled.\n");
+			printk(KERN_ERR "PCSP: Turned into nopcm mode.\n");
+			nopcm = 1;
+		}
 	}
 
 	if (loops_per_jiffy >= PCSP_MIN_LPJ && tp.tv_nsec <= PCSP_MIN_PERIOD_NS)
@@ -107,12 +113,14 @@
 		snd_card_free(card);
 		return err;
 	}
-	err = snd_pcsp_new_pcm(&pcsp_chip);
-	if (err < 0) {
-		snd_card_free(card);
-		return err;
+	if (!nopcm) {
+		err = snd_pcsp_new_pcm(&pcsp_chip);
+		if (err < 0) {
+			snd_card_free(card);
+			return err;
+		}
 	}
-	err = snd_pcsp_new_mixer(&pcsp_chip);
+	err = snd_pcsp_new_mixer(&pcsp_chip, nopcm);
 	if (err < 0) {
 		snd_card_free(card);
 		return err;
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index 174dd2f..1e12307 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -83,6 +83,6 @@
 extern void pcsp_sync_stop(struct snd_pcsp *chip);
 
 extern int snd_pcsp_new_pcm(struct snd_pcsp *chip);
-extern int snd_pcsp_new_mixer(struct snd_pcsp *chip);
+extern int snd_pcsp_new_mixer(struct snd_pcsp *chip, int nopcm);
 
 #endif
diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index 903bc84..6f633f4 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -119,24 +119,43 @@
 	.put =		pcsp_##ctl_type##_put, \
 }
 
-static struct snd_kcontrol_new __devinitdata snd_pcsp_controls[] = {
+static struct snd_kcontrol_new __devinitdata snd_pcsp_controls_pcm[] = {
 	PCSP_MIXER_CONTROL(enable, "Master Playback Switch"),
 	PCSP_MIXER_CONTROL(treble, "BaseFRQ Playback Volume"),
-	PCSP_MIXER_CONTROL(pcspkr, "PC Speaker Playback Switch"),
 };
 
-int __devinit snd_pcsp_new_mixer(struct snd_pcsp *chip)
-{
-	struct snd_card *card = chip->card;
-	int i, err;
+static struct snd_kcontrol_new __devinitdata snd_pcsp_controls_spkr[] = {
+	PCSP_MIXER_CONTROL(pcspkr, "Beep Playback Switch"),
+};
 
-	for (i = 0; i < ARRAY_SIZE(snd_pcsp_controls); i++) {
-		err = snd_ctl_add(card,
-				 snd_ctl_new1(snd_pcsp_controls + i,
-					      chip));
+static int __devinit snd_pcsp_ctls_add(struct snd_pcsp *chip,
+	struct snd_kcontrol_new *ctls, int num)
+{
+	int i, err;
+	struct snd_card *card = chip->card;
+	for (i = 0; i < num; i++) {
+		err = snd_ctl_add(card, snd_ctl_new1(ctls + i, chip));
 		if (err < 0)
 			return err;
 	}
+	return 0;
+}
+
+int __devinit snd_pcsp_new_mixer(struct snd_pcsp *chip, int nopcm)
+{
+	int err;
+	struct snd_card *card = chip->card;
+
+	if (!nopcm) {
+		err = snd_pcsp_ctls_add(chip, snd_pcsp_controls_pcm,
+			ARRAY_SIZE(snd_pcsp_controls_pcm));
+		if (err < 0)
+			return err;
+	}
+	err = snd_pcsp_ctls_add(chip, snd_pcsp_controls_spkr,
+		ARRAY_SIZE(snd_pcsp_controls_spkr));
+	if (err < 0)
+		return err;
 
 	strcpy(card->mixername, "PC-Speaker");
 
diff --git a/sound/i2c/cs8427.c b/sound/i2c/cs8427.c
index 020a5d5..04ae870 100644
--- a/sound/i2c/cs8427.c
+++ b/sound/i2c/cs8427.c
@@ -23,6 +23,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/bitrev.h>
 #include <asm/unaligned.h>
 #include <sound/core.h>
 #include <sound/control.h>
@@ -55,18 +56,6 @@
 	struct cs8427_stream capture;
 };
 
-static unsigned char swapbits(unsigned char val)
-{
-	int bit;
-	unsigned char res = 0;
-	for (bit = 0; bit < 8; bit++) {
-		res <<= 1;
-		res |= val & 1;
-		val >>= 1;
-	}
-	return res;
-}
-
 int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
 			 unsigned char val)
 {
@@ -149,7 +138,7 @@
 	}
 	data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
 	for (idx = 0; idx < count; idx++)
-		data[idx + 1] = swapbits(ndata[idx]);
+		data[idx + 1] = bitrev8(ndata[idx]);
 	if (snd_i2c_sendbytes(device, data, count + 1) != count + 1)
 		return -EIO;
 	return 1;
diff --git a/sound/i2c/other/Makefile b/sound/i2c/other/Makefile
index 703d954..2dad40f 100644
--- a/sound/i2c/other/Makefile
+++ b/sound/i2c/other/Makefile
@@ -5,6 +5,7 @@
 
 snd-ak4114-objs := ak4114.o
 snd-ak4117-objs := ak4117.o
+snd-ak4113-objs := ak4113.o
 snd-ak4xxx-adda-objs := ak4xxx-adda.o
 snd-pt2258-objs := pt2258.o
 snd-tea575x-tuner-objs := tea575x-tuner.o
@@ -12,5 +13,5 @@
 # Module Dependency
 obj-$(CONFIG_SND_PDAUDIOCF) += snd-ak4117.o
 obj-$(CONFIG_SND_ICE1712) += snd-ak4xxx-adda.o
-obj-$(CONFIG_SND_ICE1724) += snd-ak4114.o snd-ak4xxx-adda.o snd-pt2258.o
+obj-$(CONFIG_SND_ICE1724) += snd-ak4114.o snd-ak4113.o snd-ak4xxx-adda.o snd-pt2258.o
 obj-$(CONFIG_SND_FM801_TEA575X) += snd-tea575x-tuner.o
diff --git a/sound/i2c/other/ak4113.c b/sound/i2c/other/ak4113.c
new file mode 100644
index 0000000..fff62cc
--- /dev/null
+++ b/sound/i2c/other/ak4113.c
@@ -0,0 +1,639 @@
+/*
+ *  Routines for control of the AK4113 via I2C/4-wire serial interface
+ *  IEC958 (S/PDIF) receiver by Asahi Kasei
+ *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>
+ *  Copyright (c) by Pavel Hofman <pavel.hofman@ivitera.com>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/ak4113.h>
+#include <sound/asoundef.h>
+#include <sound/info.h>
+
+MODULE_AUTHOR("Pavel Hofman <pavel.hofman@ivitera.com>");
+MODULE_DESCRIPTION("AK4113 IEC958 (S/PDIF) receiver by Asahi Kasei");
+MODULE_LICENSE("GPL");
+
+#define AK4113_ADDR			0x00 /* fixed address */
+
+static void ak4113_stats(struct work_struct *work);
+static void ak4113_init_regs(struct ak4113 *chip);
+
+
+static void reg_write(struct ak4113 *ak4113, unsigned char reg,
+		unsigned char val)
+{
+	ak4113->write(ak4113->private_data, reg, val);
+	if (reg < sizeof(ak4113->regmap))
+		ak4113->regmap[reg] = val;
+}
+
+static inline unsigned char reg_read(struct ak4113 *ak4113, unsigned char reg)
+{
+	return ak4113->read(ak4113->private_data, reg);
+}
+
+static void snd_ak4113_free(struct ak4113 *chip)
+{
+	chip->init = 1;	/* don't schedule new work */
+	mb();
+	cancel_delayed_work(&chip->work);
+	flush_scheduled_work();
+	kfree(chip);
+}
+
+static int snd_ak4113_dev_free(struct snd_device *device)
+{
+	struct ak4113 *chip = device->device_data;
+	snd_ak4113_free(chip);
+	return 0;
+}
+
+int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
+		ak4113_write_t *write, const unsigned char pgm[5],
+		void *private_data, struct ak4113 **r_ak4113)
+{
+	struct ak4113 *chip;
+	int err = 0;
+	unsigned char reg;
+	static struct snd_device_ops ops = {
+		.dev_free =     snd_ak4113_dev_free,
+	};
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+	spin_lock_init(&chip->lock);
+	chip->card = card;
+	chip->read = read;
+	chip->write = write;
+	chip->private_data = private_data;
+	INIT_DELAYED_WORK(&chip->work, ak4113_stats);
+
+	for (reg = 0; reg < AK4113_WRITABLE_REGS ; reg++)
+		chip->regmap[reg] = pgm[reg];
+	ak4113_init_regs(chip);
+
+	chip->rcs0 = reg_read(chip, AK4113_REG_RCS0) & ~(AK4113_QINT |
+			AK4113_CINT | AK4113_STC);
+	chip->rcs1 = reg_read(chip, AK4113_REG_RCS1);
+	chip->rcs2 = reg_read(chip, AK4113_REG_RCS2);
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (err < 0)
+		goto __fail;
+
+	if (r_ak4113)
+		*r_ak4113 = chip;
+	return 0;
+
+__fail:
+	snd_ak4113_free(chip);
+	return err < 0 ? err : -EIO;
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_create);
+
+void snd_ak4113_reg_write(struct ak4113 *chip, unsigned char reg,
+		unsigned char mask, unsigned char val)
+{
+	if (reg >= AK4113_WRITABLE_REGS)
+		return;
+	reg_write(chip, reg, (chip->regmap[reg] & ~mask) | val);
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_reg_write);
+
+static void ak4113_init_regs(struct ak4113 *chip)
+{
+	unsigned char old = chip->regmap[AK4113_REG_PWRDN], reg;
+
+	/* bring the chip to reset state and powerdown state */
+	reg_write(chip, AK4113_REG_PWRDN, old & ~(AK4113_RST|AK4113_PWN));
+	udelay(200);
+	/* release reset, but leave powerdown */
+	reg_write(chip, AK4113_REG_PWRDN, (old | AK4113_RST) & ~AK4113_PWN);
+	udelay(200);
+	for (reg = 1; reg < AK4113_WRITABLE_REGS; reg++)
+		reg_write(chip, reg, chip->regmap[reg]);
+	/* release powerdown, everything is initialized now */
+	reg_write(chip, AK4113_REG_PWRDN, old | AK4113_RST | AK4113_PWN);
+}
+
+void snd_ak4113_reinit(struct ak4113 *chip)
+{
+	chip->init = 1;
+	mb();
+	flush_scheduled_work();
+	ak4113_init_regs(chip);
+	/* bring up statistics / event queing */
+	chip->init = 0;
+	if (chip->kctls[0])
+		schedule_delayed_work(&chip->work, HZ / 10);
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_reinit);
+
+static unsigned int external_rate(unsigned char rcs1)
+{
+	switch (rcs1 & (AK4113_FS0|AK4113_FS1|AK4113_FS2|AK4113_FS3)) {
+	case AK4113_FS_8000HZ:
+		return 8000;
+	case AK4113_FS_11025HZ:
+		return 11025;
+	case AK4113_FS_16000HZ:
+		return 16000;
+	case AK4113_FS_22050HZ:
+		return 22050;
+	case AK4113_FS_24000HZ:
+		return 24000;
+	case AK4113_FS_32000HZ:
+		return 32000;
+	case AK4113_FS_44100HZ:
+		return 44100;
+	case AK4113_FS_48000HZ:
+		return 48000;
+	case AK4113_FS_64000HZ:
+		return 64000;
+	case AK4113_FS_88200HZ:
+		return 88200;
+	case AK4113_FS_96000HZ:
+		return 96000;
+	case AK4113_FS_176400HZ:
+		return 176400;
+	case AK4113_FS_192000HZ:
+		return 192000;
+	default:
+		return 0;
+	}
+}
+
+static int snd_ak4113_in_error_info(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = LONG_MAX;
+	return 0;
+}
+
+static int snd_ak4113_in_error_get(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+	long *ptr;
+
+	spin_lock_irq(&chip->lock);
+	ptr = (long *)(((char *)chip) + kcontrol->private_value);
+	ucontrol->value.integer.value[0] = *ptr;
+	*ptr = 0;
+	spin_unlock_irq(&chip->lock);
+	return 0;
+}
+
+#define snd_ak4113_in_bit_info		snd_ctl_boolean_mono_info
+
+static int snd_ak4113_in_bit_get(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned char reg = kcontrol->private_value & 0xff;
+	unsigned char bit = (kcontrol->private_value >> 8) & 0xff;
+	unsigned char inv = (kcontrol->private_value >> 31) & 1;
+
+	ucontrol->value.integer.value[0] =
+		((reg_read(chip, reg) & (1 << bit)) ? 1 : 0) ^ inv;
+	return 0;
+}
+
+static int snd_ak4113_rx_info(struct snd_kcontrol *kcontrol,
+			      struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 5;
+	return 0;
+}
+
+static int snd_ak4113_rx_get(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] =
+		(AK4113_IPS(chip->regmap[AK4113_REG_IO1]));
+	return 0;
+}
+
+static int snd_ak4113_rx_put(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+	int change;
+	u8 old_val;
+
+	spin_lock_irq(&chip->lock);
+	old_val = chip->regmap[AK4113_REG_IO1];
+	change = ucontrol->value.integer.value[0] != AK4113_IPS(old_val);
+	if (change)
+		reg_write(chip, AK4113_REG_IO1,
+				(old_val & (~AK4113_IPS(0xff))) |
+				(AK4113_IPS(ucontrol->value.integer.value[0])));
+	spin_unlock_irq(&chip->lock);
+	return change;
+}
+
+static int snd_ak4113_rate_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 192000;
+	return 0;
+}
+
+static int snd_ak4113_rate_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.integer.value[0] = external_rate(reg_read(chip,
+				AK4113_REG_RCS1));
+	return 0;
+}
+
+static int snd_ak4113_spdif_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int snd_ak4113_spdif_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned i;
+
+	for (i = 0; i < AK4113_REG_RXCSB_SIZE; i++)
+		ucontrol->value.iec958.status[i] = reg_read(chip,
+				AK4113_REG_RXCSB0 + i);
+	return 0;
+}
+
+static int snd_ak4113_spdif_mask_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
+	uinfo->count = 1;
+	return 0;
+}
+
+static int snd_ak4113_spdif_mask_get(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	memset(ucontrol->value.iec958.status, 0xff, AK4113_REG_RXCSB_SIZE);
+	return 0;
+}
+
+static int snd_ak4113_spdif_pinfo(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 0xffff;
+	uinfo->count = 4;
+	return 0;
+}
+
+static int snd_ak4113_spdif_pget(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned short tmp;
+
+	ucontrol->value.integer.value[0] = 0xf8f2;
+	ucontrol->value.integer.value[1] = 0x4e1f;
+	tmp = reg_read(chip, AK4113_REG_Pc0) |
+		(reg_read(chip, AK4113_REG_Pc1) << 8);
+	ucontrol->value.integer.value[2] = tmp;
+	tmp = reg_read(chip, AK4113_REG_Pd0) |
+		(reg_read(chip, AK4113_REG_Pd1) << 8);
+	ucontrol->value.integer.value[3] = tmp;
+	return 0;
+}
+
+static int snd_ak4113_spdif_qinfo(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
+	uinfo->count = AK4113_REG_QSUB_SIZE;
+	return 0;
+}
+
+static int snd_ak4113_spdif_qget(struct snd_kcontrol *kcontrol,
+				 struct snd_ctl_elem_value *ucontrol)
+{
+	struct ak4113 *chip = snd_kcontrol_chip(kcontrol);
+	unsigned i;
+
+	for (i = 0; i < AK4113_REG_QSUB_SIZE; i++)
+		ucontrol->value.bytes.data[i] = reg_read(chip,
+				AK4113_REG_QSUB_ADDR + i);
+	return 0;
+}
+
+/* Don't forget to change AK4113_CONTROLS define!!! */
+static struct snd_kcontrol_new snd_ak4113_iec958_controls[] = {
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 Parity Errors",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_error_info,
+	.get =		snd_ak4113_in_error_get,
+	.private_value = offsetof(struct ak4113, parity_errors),
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 V-Bit Errors",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_error_info,
+	.get =		snd_ak4113_in_error_get,
+	.private_value = offsetof(struct ak4113, v_bit_errors),
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 C-CRC Errors",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_error_info,
+	.get =		snd_ak4113_in_error_get,
+	.private_value = offsetof(struct ak4113, ccrc_errors),
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 Q-CRC Errors",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_error_info,
+	.get =		snd_ak4113_in_error_get,
+	.private_value = offsetof(struct ak4113, qcrc_errors),
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 External Rate",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_rate_info,
+	.get =		snd_ak4113_rate_get,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK),
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ,
+	.info =		snd_ak4113_spdif_mask_info,
+	.get =		snd_ak4113_spdif_mask_get,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_spdif_info,
+	.get =		snd_ak4113_spdif_get,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 Preample Capture Default",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_spdif_pinfo,
+	.get =		snd_ak4113_spdif_pget,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 Q-subcode Capture Default",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_spdif_qinfo,
+	.get =		snd_ak4113_spdif_qget,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 Audio",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_bit_info,
+	.get =		snd_ak4113_in_bit_get,
+	.private_value = (1<<31) | (1<<8) | AK4113_REG_RCS0,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 Non-PCM Bitstream",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_bit_info,
+	.get =		snd_ak4113_in_bit_get,
+	.private_value = (0<<8) | AK4113_REG_RCS1,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"IEC958 DTS Bitstream",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+	.info =		snd_ak4113_in_bit_info,
+	.get =		snd_ak4113_in_bit_get,
+	.private_value = (1<<8) | AK4113_REG_RCS1,
+},
+{
+	.iface =	SNDRV_CTL_ELEM_IFACE_PCM,
+	.name =		"AK4113 Input Select",
+	.access =	SNDRV_CTL_ELEM_ACCESS_READ |
+		SNDRV_CTL_ELEM_ACCESS_WRITE,
+	.info =		snd_ak4113_rx_info,
+	.get =		snd_ak4113_rx_get,
+	.put =		snd_ak4113_rx_put,
+}
+};
+
+static void snd_ak4113_proc_regs_read(struct snd_info_entry *entry,
+		struct snd_info_buffer *buffer)
+{
+	struct ak4113 *ak4113 = entry->private_data;
+	int reg, val;
+	/* all ak4113 registers 0x00 - 0x1c */
+	for (reg = 0; reg < 0x1d; reg++) {
+		val = reg_read(ak4113, reg);
+		snd_iprintf(buffer, "0x%02x = 0x%02x\n", reg, val);
+	}
+}
+
+static void snd_ak4113_proc_init(struct ak4113 *ak4113)
+{
+	struct snd_info_entry *entry;
+	if (!snd_card_proc_new(ak4113->card, "ak4113", &entry))
+		snd_info_set_text_ops(entry, ak4113, snd_ak4113_proc_regs_read);
+}
+
+int snd_ak4113_build(struct ak4113 *ak4113,
+		struct snd_pcm_substream *cap_substream)
+{
+	struct snd_kcontrol *kctl;
+	unsigned int idx;
+	int err;
+
+	if (snd_BUG_ON(!cap_substream))
+		return -EINVAL;
+	ak4113->substream = cap_substream;
+	for (idx = 0; idx < AK4113_CONTROLS; idx++) {
+		kctl = snd_ctl_new1(&snd_ak4113_iec958_controls[idx], ak4113);
+		if (kctl == NULL)
+			return -ENOMEM;
+		kctl->id.device = cap_substream->pcm->device;
+		kctl->id.subdevice = cap_substream->number;
+		err = snd_ctl_add(ak4113->card, kctl);
+		if (err < 0)
+			return err;
+		ak4113->kctls[idx] = kctl;
+	}
+	snd_ak4113_proc_init(ak4113);
+	/* trigger workq */
+	schedule_delayed_work(&ak4113->work, HZ / 10);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_build);
+
+int snd_ak4113_external_rate(struct ak4113 *ak4113)
+{
+	unsigned char rcs1;
+
+	rcs1 = reg_read(ak4113, AK4113_REG_RCS1);
+	return external_rate(rcs1);
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_external_rate);
+
+int snd_ak4113_check_rate_and_errors(struct ak4113 *ak4113, unsigned int flags)
+{
+	struct snd_pcm_runtime *runtime =
+		ak4113->substream ? ak4113->substream->runtime : NULL;
+	unsigned long _flags;
+	int res = 0;
+	unsigned char rcs0, rcs1, rcs2;
+	unsigned char c0, c1;
+
+	rcs1 = reg_read(ak4113, AK4113_REG_RCS1);
+	if (flags & AK4113_CHECK_NO_STAT)
+		goto __rate;
+	rcs0 = reg_read(ak4113, AK4113_REG_RCS0);
+	rcs2 = reg_read(ak4113, AK4113_REG_RCS2);
+	spin_lock_irqsave(&ak4113->lock, _flags);
+	if (rcs0 & AK4113_PAR)
+		ak4113->parity_errors++;
+	if (rcs0 & AK4113_V)
+		ak4113->v_bit_errors++;
+	if (rcs2 & AK4113_CCRC)
+		ak4113->ccrc_errors++;
+	if (rcs2 & AK4113_QCRC)
+		ak4113->qcrc_errors++;
+	c0 = (ak4113->rcs0 & (AK4113_QINT | AK4113_CINT | AK4113_STC |
+				AK4113_AUDION | AK4113_AUTO | AK4113_UNLCK)) ^
+		(rcs0 & (AK4113_QINT | AK4113_CINT | AK4113_STC |
+			 AK4113_AUDION | AK4113_AUTO | AK4113_UNLCK));
+	c1 = (ak4113->rcs1 & (AK4113_DTSCD | AK4113_NPCM | AK4113_PEM |
+				AK4113_DAT | 0xf0)) ^
+		(rcs1 & (AK4113_DTSCD | AK4113_NPCM | AK4113_PEM |
+			 AK4113_DAT | 0xf0));
+	ak4113->rcs0 = rcs0 & ~(AK4113_QINT | AK4113_CINT | AK4113_STC);
+	ak4113->rcs1 = rcs1;
+	ak4113->rcs2 = rcs2;
+	spin_unlock_irqrestore(&ak4113->lock, _flags);
+
+	if (rcs0 & AK4113_PAR)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[0]->id);
+	if (rcs0 & AK4113_V)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[1]->id);
+	if (rcs2 & AK4113_CCRC)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[2]->id);
+	if (rcs2 & AK4113_QCRC)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[3]->id);
+
+	/* rate change */
+	if (c1 & 0xf0)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[4]->id);
+
+	if ((c1 & AK4113_PEM) | (c0 & AK4113_CINT))
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[6]->id);
+	if (c0 & AK4113_QINT)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[8]->id);
+
+	if (c0 & AK4113_AUDION)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[9]->id);
+	if (c1 & AK4113_NPCM)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[10]->id);
+	if (c1 & AK4113_DTSCD)
+		snd_ctl_notify(ak4113->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				&ak4113->kctls[11]->id);
+
+	if (ak4113->change_callback && (c0 | c1) != 0)
+		ak4113->change_callback(ak4113, c0, c1);
+
+__rate:
+	/* compare rate */
+	res = external_rate(rcs1);
+	if (!(flags & AK4113_CHECK_NO_RATE) && runtime &&
+			(runtime->rate != res)) {
+		snd_pcm_stream_lock_irqsave(ak4113->substream, _flags);
+		if (snd_pcm_running(ak4113->substream)) {
+			/*printk(KERN_DEBUG "rate changed (%i <- %i)\n",
+			 * runtime->rate, res); */
+			snd_pcm_stop(ak4113->substream,
+					SNDRV_PCM_STATE_DRAINING);
+			wake_up(&runtime->sleep);
+			res = 1;
+		}
+		snd_pcm_stream_unlock_irqrestore(ak4113->substream, _flags);
+	}
+	return res;
+}
+EXPORT_SYMBOL_GPL(snd_ak4113_check_rate_and_errors);
+
+static void ak4113_stats(struct work_struct *work)
+{
+	struct ak4113 *chip = container_of(work, struct ak4113, work.work);
+
+	if (!chip->init)
+		snd_ak4113_check_rate_and_errors(chip, chip->check_flags);
+
+	schedule_delayed_work(&chip->work, HZ / 10);
+}
diff --git a/sound/i2c/other/ak4xxx-adda.c b/sound/i2c/other/ak4xxx-adda.c
index ee47aba..1adb8a3 100644
--- a/sound/i2c/other/ak4xxx-adda.c
+++ b/sound/i2c/other/ak4xxx-adda.c
@@ -19,7 +19,7 @@
  *   along with this program; if not, write to the Free Software
  *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- */      
+ */
 
 #include <asm/io.h>
 #include <linux/delay.h>
@@ -29,6 +29,7 @@
 #include <sound/control.h>
 #include <sound/tlv.h>
 #include <sound/ak4xxx-adda.h>
+#include <sound/info.h>
 
 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.de>");
 MODULE_DESCRIPTION("Routines for control of AK452x / AK43xx  AD/DA converters");
@@ -52,26 +53,21 @@
 static void ak4524_reset(struct snd_akm4xxx *ak, int state)
 {
 	unsigned int chip;
-	unsigned char reg, maxreg;
+	unsigned char reg;
 
-	if (ak->type == SND_AK4528)
-		maxreg = 0x06;
-	else
-		maxreg = 0x08;
 	for (chip = 0; chip < ak->num_dacs/2; chip++) {
 		snd_akm4xxx_write(ak, chip, 0x01, state ? 0x00 : 0x03);
 		if (state)
 			continue;
 		/* DAC volumes */
-		for (reg = 0x04; reg < maxreg; reg++)
+		for (reg = 0x04; reg < ak->total_regs; reg++)
 			snd_akm4xxx_write(ak, chip, reg,
 					  snd_akm4xxx_get(ak, chip, reg));
 	}
 }
 
 /* reset procedure for AK4355 and AK4358 */
-static void ak435X_reset(struct snd_akm4xxx *ak, int state,
-		unsigned char total_regs)
+static void ak435X_reset(struct snd_akm4xxx *ak, int state)
 {
 	unsigned char reg;
 
@@ -79,7 +75,7 @@
 		snd_akm4xxx_write(ak, 0, 0x01, 0x02); /* reset and soft-mute */
 		return;
 	}
-	for (reg = 0x00; reg < total_regs; reg++)
+	for (reg = 0x00; reg < ak->total_regs; reg++)
 		if (reg != 0x01)
 			snd_akm4xxx_write(ak, 0, reg,
 					  snd_akm4xxx_get(ak, 0, reg));
@@ -91,12 +87,11 @@
 {
 	unsigned int chip;
 	unsigned char reg;
-
 	for (chip = 0; chip < ak->num_dacs/2; chip++) {
 		snd_akm4xxx_write(ak, chip, 0x00, state ? 0x0c : 0x0f);
 		if (state)
 			continue;
-		for (reg = 0x01; reg < 0x05; reg++)
+		for (reg = 0x01; reg < ak->total_regs; reg++)
 			snd_akm4xxx_write(ak, chip, reg,
 					  snd_akm4xxx_get(ak, chip, reg));
 	}
@@ -113,16 +108,17 @@
 	switch (ak->type) {
 	case SND_AK4524:
 	case SND_AK4528:
+	case SND_AK4620:
 		ak4524_reset(ak, state);
 		break;
 	case SND_AK4529:
 		/* FIXME: needed for ak4529? */
 		break;
 	case SND_AK4355:
-		ak435X_reset(ak, state, 0x0b);
+		ak435X_reset(ak, state);
 		break;
 	case SND_AK4358:
-		ak435X_reset(ak, state, 0x10);
+		ak435X_reset(ak, state);
 		break;
 	case SND_AK4381:
 		ak4381_reset(ak, state);
@@ -139,7 +135,7 @@
  * Volume conversion table for non-linear volumes
  * from -63.5dB (mute) to 0dB step 0.5dB
  *
- * Used for AK4524 input/ouput attenuation, AK4528, and
+ * Used for AK4524/AK4620 input/ouput attenuation, AK4528, and
  * AK5365 input attenuation
  */
 static const unsigned char vol_cvt_datt[128] = {
@@ -259,8 +255,22 @@
 		0x00, 0x0f, /* 0: power-up, un-reset */
 		0xff, 0xff
 	};
+	static const unsigned char inits_ak4620[] = {
+		0x00, 0x07, /* 0: normal */
+		0x01, 0x00, /* 0: reset */
+		0x01, 0x02, /* 1: RSTAD */
+		0x01, 0x03, /* 1: RSTDA */
+		0x01, 0x0f, /* 1: normal */
+		0x02, 0x60, /* 2: 24bit I2S */
+		0x03, 0x01, /* 3: deemphasis off */
+		0x04, 0x00, /* 4: LIN muted */
+		0x05, 0x00, /* 5: RIN muted */
+		0x06, 0x00, /* 6: LOUT muted */
+		0x07, 0x00, /* 7: ROUT muted */
+		0xff, 0xff
+	};
 
-	int chip, num_chips;
+	int chip;
 	const unsigned char *ptr, *inits;
 	unsigned char reg, data;
 
@@ -270,42 +280,64 @@
 	switch (ak->type) {
 	case SND_AK4524:
 		inits = inits_ak4524;
-		num_chips = ak->num_dacs / 2;
+		ak->num_chips = ak->num_dacs / 2;
+		ak->name = "ak4524";
+		ak->total_regs = 0x08;
 		break;
 	case SND_AK4528:
 		inits = inits_ak4528;
-		num_chips = ak->num_dacs / 2;
+		ak->num_chips = ak->num_dacs / 2;
+		ak->name = "ak4528";
+		ak->total_regs = 0x06;
 		break;
 	case SND_AK4529:
 		inits = inits_ak4529;
-		num_chips = 1;
+		ak->num_chips = 1;
+		ak->name = "ak4529";
+		ak->total_regs = 0x0d;
 		break;
 	case SND_AK4355:
 		inits = inits_ak4355;
-		num_chips = 1;
+		ak->num_chips = 1;
+		ak->name = "ak4355";
+		ak->total_regs = 0x0b;
 		break;
 	case SND_AK4358:
 		inits = inits_ak4358;
-		num_chips = 1;
+		ak->num_chips = 1;
+		ak->name = "ak4358";
+		ak->total_regs = 0x10;
 		break;
 	case SND_AK4381:
 		inits = inits_ak4381;
-		num_chips = ak->num_dacs / 2;
+		ak->num_chips = ak->num_dacs / 2;
+		ak->name = "ak4381";
+		ak->total_regs = 0x05;
 		break;
 	case SND_AK5365:
 		/* FIXME: any init sequence? */
+		ak->num_chips = 1;
+		ak->name = "ak5365";
+		ak->total_regs = 0x08;
 		return;
+	case SND_AK4620:
+		inits = inits_ak4620;
+		ak->num_chips = ak->num_dacs / 2;
+		ak->name = "ak4620";
+		ak->total_regs = 0x08;
+		break;
 	default:
 		snd_BUG();
 		return;
 	}
 
-	for (chip = 0; chip < num_chips; chip++) {
+	for (chip = 0; chip < ak->num_chips; chip++) {
 		ptr = inits;
 		while (*ptr != 0xff) {
 			reg = *ptr++;
 			data = *ptr++;
 			snd_akm4xxx_write(ak, chip, reg, data);
+			udelay(10);
 		}
 	}
 }
@@ -688,6 +720,12 @@
 				AK_COMPOSE(idx/2, (idx%2) + 3, 0, 255);
 			knew.tlv.p = db_scale_linear;
 			break;
+		case SND_AK4620:
+			/* register 6 & 7 */
+			knew.private_value =
+				AK_COMPOSE(idx/2, (idx%2) + 6, 0, 255);
+			knew.tlv.p = db_scale_linear;
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -704,10 +742,12 @@
 
 static int build_adc_controls(struct snd_akm4xxx *ak)
 {
-	int idx, err, mixer_ch, num_stereo;
+	int idx, err, mixer_ch, num_stereo, max_steps;
 	struct snd_kcontrol_new knew;
 
 	mixer_ch = 0;
+	if (ak->type == SND_AK4528)
+		return 0;	/* no controls */
 	for (idx = 0; idx < ak->num_adcs;) {
 		memset(&knew, 0, sizeof(knew));
 		if (! ak->adc_info || ! ak->adc_info[mixer_ch].name) {
@@ -733,13 +773,12 @@
 		}
 		/* register 4 & 5 */
 		if (ak->type == SND_AK5365)
-			knew.private_value =
-				AK_COMPOSE(idx/2, (idx%2) + 4, 0, 151) |
-				AK_VOL_CVT | AK_IPGA;
+			max_steps = 152;
 		else
-			knew.private_value =
-				AK_COMPOSE(idx/2, (idx%2) + 4, 0, 163) |
-				AK_VOL_CVT | AK_IPGA;
+			max_steps = 164;
+		knew.private_value =
+			AK_COMPOSE(idx/2, (idx%2) + 4, 0, max_steps) |
+			AK_VOL_CVT | AK_IPGA;
 		knew.tlv.p = db_scale_vol_datt;
 		err = snd_ctl_add(ak->card, snd_ctl_new1(&knew, ak));
 		if (err < 0)
@@ -808,6 +847,7 @@
 		switch (ak->type) {
 		case SND_AK4524:
 		case SND_AK4528:
+		case SND_AK4620:
 			/* register 3 */
 			knew.private_value = AK_COMPOSE(idx, 3, 0, 0);
 			break;
@@ -834,6 +874,35 @@
 	return 0;
 }
 
+#ifdef CONFIG_PROC_FS
+static void proc_regs_read(struct snd_info_entry *entry,
+		struct snd_info_buffer *buffer)
+{
+	struct snd_akm4xxx *ak = (struct snd_akm4xxx *)entry->private_data;
+	int reg, val, chip;
+	for (chip = 0; chip < ak->num_chips; chip++) {
+		for (reg = 0; reg < ak->total_regs; reg++) {
+			val =  snd_akm4xxx_get(ak, chip, reg);
+			snd_iprintf(buffer, "chip %d: 0x%02x = 0x%02x\n", chip,
+					reg, val);
+		}
+	}
+}
+
+static int proc_init(struct snd_akm4xxx *ak)
+{
+	struct snd_info_entry *entry;
+	int err;
+	err = snd_card_proc_new(ak->card, ak->name, &entry);
+	if (err < 0)
+		return err;
+	snd_info_set_text_ops(entry, ak, proc_regs_read);
+	return 0;
+}
+#else /* !CONFIG_PROC_FS */
+static int proc_init(struct snd_akm4xxx *ak) {}
+#endif
+
 int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak)
 {
 	int err, num_emphs;
@@ -845,18 +914,21 @@
 	err = build_adc_controls(ak);
 	if (err < 0)
 		return err;
-
 	if (ak->type == SND_AK4355 || ak->type == SND_AK4358)
 		num_emphs = 1;
+	else if (ak->type == SND_AK4620)
+		num_emphs = 0;
 	else
 		num_emphs = ak->num_dacs / 2;
 	err = build_deemphasis(ak, num_emphs);
 	if (err < 0)
 		return err;
+	err = proc_init(ak);
+	if (err < 0)
+		return err;
 
 	return 0;
 }
-	
 EXPORT_SYMBOL(snd_akm4xxx_build_controls);
 
 static int __init alsa_akm4xxx_module_init(void)
diff --git a/sound/i2c/other/tea575x-tuner.c b/sound/i2c/other/tea575x-tuner.c
index d31c373..c4c6ef7 100644
--- a/sound/i2c/other/tea575x-tuner.c
+++ b/sound/i2c/other/tea575x-tuner.c
@@ -225,7 +225,7 @@
 	case V4L2_CID_AUDIO_MUTE:
 		if (tea->ops->mute) {
 			tea->ops->mute(tea, ctrl->value);
-			tea->mute = 1;
+			tea->mute = ctrl->value;
 			return 0;
 		}
 	}
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 51a7e37..02fe81ca 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -372,15 +372,21 @@
 
 config SND_SSCAPE
 	tristate "Ensoniq SoundScape driver"
-	select SND_HWDEP
 	select SND_MPU401_UART
 	select SND_WSS_LIB
+	select FW_LOADER
 	help
 	  Say Y here to include support for Ensoniq SoundScape 
-	  soundcards.
+	  and Ensoniq OEM soundcards.
 
 	  The PCM audio is supported on SoundScape Classic, Elite, PnP
-	  and VIVO cards. The MIDI support is very experimental.
+	  and VIVO cards. The supported OEM cards are SPEA Media FX and
+	  Reveal SC-600.
+	  The MIDI support is very experimental and requires binary
+	  firmware files called "scope.cod" and "sndscape.co?" where the
+	  ? is digit 0, 1, 2, 3 or 4. The firmware files can be found
+	  in DOS or Windows driver packages. One has to put the firmware
+	  files into the /lib/firmware directory.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-sscape.
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index 02f79d2..8246aae 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -237,7 +237,7 @@
 		CMI8330_WAVGAIN, CMI8330_WAVGAIN, 4, 0, 15, 0),
 WSS_SINGLE("3D Control - Switch", 0,
 		CMI8330_RMUX3D, 5, 1, 1),
-WSS_SINGLE("PC Speaker Playback Volume", 0,
+WSS_SINGLE("Beep Playback Volume", 0,
 		CMI8330_OUTPUTVOL, 3, 3, 0),
 WSS_DOUBLE("FM Playback Switch", 0,
 		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
@@ -262,7 +262,7 @@
 SB_DOUBLE("SB Line Playback Volume", SB_DSP4_LINE_DEV, (SB_DSP4_LINE_DEV + 1), 3, 3, 31),
 SB_SINGLE("SB Mic Playback Switch", SB_DSP4_OUTPUT_SW, 0, 1),
 SB_SINGLE("SB Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31),
-SB_SINGLE("SB PC Speaker Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
+SB_SINGLE("SB Beep Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
 SB_DOUBLE("SB Capture Volume", SB_DSP4_IGAIN_DEV, (SB_DSP4_IGAIN_DEV + 1), 6, 6, 3),
 SB_DOUBLE("SB Playback Volume", SB_DSP4_OGAIN_DEV, (SB_DSP4_OGAIN_DEV + 1), 6, 6, 3),
 SB_SINGLE("SB Mic Auto Gain", SB_DSP4_MIC_AGC, 0, 1),
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index a076a6c..93fa672 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -394,21 +394,15 @@
 			return -EBUSY;
 		}
 
-	err = snd_wss_create(card, port[dev], cport[dev],
+	err = snd_cs4236_create(card, port[dev], cport[dev],
 			     irq[dev],
 			     dma1[dev], dma2[dev],
 			     WSS_HW_DETECT3, 0, &chip);
 	if (err < 0)
 		return err;
+
+	acard->chip = chip;
 	if (chip->hardware & WSS_HW_CS4236B_MASK) {
-		snd_wss_free(chip);
-		err = snd_cs4236_create(card,
-					port[dev], cport[dev],
-					irq[dev], dma1[dev], dma2[dev],
-					WSS_HW_DETECT, 0, &chip);
-		if (err < 0)
-			return err;
-		acard->chip = chip;
 
 		err = snd_cs4236_pcm(chip, 0, &pcm);
 		if (err < 0)
@@ -418,7 +412,6 @@
 		if (err < 0)
 			return err;
 	} else {
-		acard->chip = chip;
 		err = snd_wss_pcm(chip, 0, &pcm);
 		if (err < 0)
 			return err;
diff --git a/sound/isa/cs423x/cs4236_lib.c b/sound/isa/cs423x/cs4236_lib.c
index 38835f3..c5adca3 100644
--- a/sound/isa/cs423x/cs4236_lib.c
+++ b/sound/isa/cs423x/cs4236_lib.c
@@ -87,6 +87,8 @@
 #include <sound/core.h>
 #include <sound/wss.h>
 #include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
 
 /*
  *
@@ -264,7 +266,10 @@
 }
 
 #endif /* CONFIG_PM */
-
+/*
+ * This function does no fail if the chip is not CS4236B or compatible.
+ * It just an equivalent to the snd_wss_create() then.
+ */
 int snd_cs4236_create(struct snd_card *card,
 		      unsigned long port,
 		      unsigned long cport,
@@ -281,21 +286,17 @@
 	*rchip = NULL;
 	if (hardware == WSS_HW_DETECT)
 		hardware = WSS_HW_DETECT3;
-	if (cport < 0x100) {
-		snd_printk(KERN_ERR "please, specify control port "
-			   "for CS4236+ chips\n");
-		return -ENODEV;
-	}
+
 	err = snd_wss_create(card, port, cport,
 			     irq, dma1, dma2, hardware, hwshare, &chip);
 	if (err < 0)
 		return err;
 
-	if (!(chip->hardware & WSS_HW_CS4236B_MASK)) {
-		snd_printk(KERN_ERR "CS4236+: MODE3 and extended registers "
-			   "not available, hardware=0x%x\n", chip->hardware);
-		snd_device_free(card, chip);
-		return -ENODEV;
+	if ((chip->hardware & WSS_HW_CS4236B_MASK) == 0) {
+		snd_printd("chip is not CS4236+, hardware=0x%x\n",
+			   chip->hardware);
+		*rchip = chip;
+		return 0;
 	}
 #if 0
 	{
@@ -308,9 +309,16 @@
 				   idx, snd_cs4236_ctrl_in(chip, idx));
 	}
 #endif
+	if (cport < 0x100 || cport == SNDRV_AUTO_PORT) {
+		snd_printk(KERN_ERR "please, specify control port "
+			   "for CS4236+ chips\n");
+		snd_device_free(card, chip);
+		return -ENODEV;
+	}
 	ver1 = snd_cs4236_ctrl_in(chip, 1);
 	ver2 = snd_cs4236_ext_in(chip, CS4236_VERSION);
-	snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n", cport, ver1, ver2);
+	snd_printdd("CS4236: [0x%lx] C1 (version) = 0x%x, ext = 0x%x\n",
+			cport, ver1, ver2);
 	if (ver1 != ver2) {
 		snd_printk(KERN_ERR "CS4236+ chip detected, but "
 			   "control port 0x%lx is not valid\n", cport);
@@ -321,13 +329,17 @@
 	snd_cs4236_ctrl_out(chip, 2, 0xff);
 	snd_cs4236_ctrl_out(chip, 3, 0x00);
 	snd_cs4236_ctrl_out(chip, 4, 0x80);
-	snd_cs4236_ctrl_out(chip, 5, ((IEC958_AES1_CON_PCM_CODER & 3) << 6) | IEC958_AES0_CON_EMPHASIS_NONE);
+	reg = ((IEC958_AES1_CON_PCM_CODER & 3) << 6) |
+	      IEC958_AES0_CON_EMPHASIS_NONE;
+	snd_cs4236_ctrl_out(chip, 5, reg);
 	snd_cs4236_ctrl_out(chip, 6, IEC958_AES1_CON_PCM_CODER >> 2);
 	snd_cs4236_ctrl_out(chip, 7, 0x00);
-	/* 0x8c for C8 is valid for Turtle Beach Malibu - the IEC-958 output */
-	/* is working with this setup, other hardware should have */
-	/* different signal paths and this value should be selectable */
-	/* in the future */
+	/*
+	 * 0x8c for C8 is valid for Turtle Beach Malibu - the IEC-958
+	 * output is working with this setup, other hardware should
+	 * have different signal paths and this value should be
+	 * selectable in the future
+	 */
 	snd_cs4236_ctrl_out(chip, 8, 0x8c);
 	chip->rate_constraint = snd_cs4236_xrate;
 	chip->set_playback_format = snd_cs4236_playback_format;
@@ -339,9 +351,10 @@
 
 	/* initialize extended registers */
 	for (reg = 0; reg < sizeof(snd_cs4236_ext_map); reg++)
-		snd_cs4236_ext_out(chip, CS4236_I23VAL(reg), snd_cs4236_ext_map[reg]);
+		snd_cs4236_ext_out(chip, CS4236_I23VAL(reg),
+				   snd_cs4236_ext_map[reg]);
 
-        /* initialize compatible but more featured registers */
+	/* initialize compatible but more featured registers */
 	snd_wss_out(chip, CS4231_LEFT_INPUT, 0x40);
 	snd_wss_out(chip, CS4231_RIGHT_INPUT, 0x40);
 	snd_wss_out(chip, CS4231_AUX1_LEFT_INPUT, 0xff);
@@ -387,6 +400,14 @@
   .get = snd_cs4236_get_single, .put = snd_cs4236_put_single, \
   .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24) }
 
+#define CS4236_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
+  .info = snd_cs4236_info_single, \
+  .get = snd_cs4236_get_single, .put = snd_cs4236_put_single, \
+  .private_value = reg | (shift << 8) | (mask << 16) | (invert << 24), \
+  .tlv = { .p = (xtlv) } }
+
 static int snd_cs4236_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	int mask = (kcontrol->private_value >> 16) & 0xff;
@@ -490,6 +511,16 @@
   .get = snd_cs4236_get_double, .put = snd_cs4236_put_double, \
   .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
 
+#define CS4236_DOUBLE_TLV(xname, xindex, left_reg, right_reg, shift_left, \
+			  shift_right, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
+  .info = snd_cs4236_info_double, \
+  .get = snd_cs4236_get_double, .put = snd_cs4236_put_double, \
+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | \
+		   (shift_right << 19) | (mask << 24) | (invert << 22), \
+  .tlv = { .p = (xtlv) } }
+
 static int snd_cs4236_info_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	int mask = (kcontrol->private_value >> 24) & 0xff;
@@ -560,12 +591,23 @@
 	return change;
 }
 
-#define CS4236_DOUBLE1(xname, xindex, left_reg, right_reg, shift_left, shift_right, mask, invert) \
+#define CS4236_DOUBLE1(xname, xindex, left_reg, right_reg, shift_left, \
+			shift_right, mask, invert) \
 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
   .info = snd_cs4236_info_double, \
   .get = snd_cs4236_get_double1, .put = snd_cs4236_put_double1, \
   .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | (shift_right << 19) | (mask << 24) | (invert << 22) }
 
+#define CS4236_DOUBLE1_TLV(xname, xindex, left_reg, right_reg, shift_left, \
+			   shift_right, mask, invert, xtlv) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
+  .info = snd_cs4236_info_double, \
+  .get = snd_cs4236_get_double1, .put = snd_cs4236_put_double1, \
+  .private_value = left_reg | (right_reg << 8) | (shift_left << 16) | \
+		   (shift_right << 19) | (mask << 24) | (invert << 22), \
+  .tlv = { .p = (xtlv) } }
+
 static int snd_cs4236_get_double1(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_wss *chip = snd_kcontrol_chip(kcontrol);
@@ -619,16 +661,18 @@
 	return change;
 }
 
-#define CS4236_MASTER_DIGITAL(xname, xindex) \
+#define CS4236_MASTER_DIGITAL(xname, xindex, xtlv) \
 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
   .info = snd_cs4236_info_double, \
   .get = snd_cs4236_get_master_digital, .put = snd_cs4236_put_master_digital, \
-  .private_value = 71 << 24 }
+  .private_value = 71 << 24, \
+  .tlv = { .p = (xtlv) } }
 
 static inline int snd_cs4236_mixer_master_digital_invert_volume(int vol)
 {
 	return (vol < 64) ? 63 - vol : 64 + (71 - vol);
-}        
+}
 
 static int snd_cs4236_get_master_digital(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
 {
@@ -661,11 +705,13 @@
 	return change;
 }
 
-#define CS4235_OUTPUT_ACCU(xname, xindex) \
+#define CS4235_OUTPUT_ACCU(xname, xindex, xtlv) \
 { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \
+  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \
   .info = snd_cs4236_info_double, \
   .get = snd_cs4235_get_output_accu, .put = snd_cs4235_put_output_accu, \
-  .private_value = 3 << 24 }
+  .private_value = 3 << 24, \
+  .tlv = { .p = (xtlv) } }
 
 static inline int snd_cs4235_mixer_output_accu_get_volume(int vol)
 {
@@ -720,41 +766,56 @@
 	return change;
 }
 
+static const DECLARE_TLV_DB_SCALE(db_scale_7bit, -9450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_6bit, -9450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_6bit_12db_max, -8250, 150, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_5bit_12db_max, -3450, 150, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_5bit_22db_max, -2400, 150, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_4bit, -4500, 300, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_2bit, -1800, 600, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_rec_gain, 0, 150, 0);
+
 static struct snd_kcontrol_new snd_cs4236_controls[] = {
 
 CS4236_DOUBLE("Master Digital Playback Switch", 0,
 		CS4236_LEFT_MASTER, CS4236_RIGHT_MASTER, 7, 7, 1, 1),
 CS4236_DOUBLE("Master Digital Capture Switch", 0,
 		CS4236_DAC_MUTE, CS4236_DAC_MUTE, 7, 6, 1, 1),
-CS4236_MASTER_DIGITAL("Master Digital Volume", 0),
+CS4236_MASTER_DIGITAL("Master Digital Volume", 0, db_scale_7bit),
 
-CS4236_DOUBLE("Capture Boost Volume", 0,
-		CS4236_LEFT_MIX_CTRL, CS4236_RIGHT_MIX_CTRL, 5, 5, 3, 1),
+CS4236_DOUBLE_TLV("Capture Boost Volume", 0,
+		  CS4236_LEFT_MIX_CTRL, CS4236_RIGHT_MIX_CTRL, 5, 5, 3, 1,
+		  db_scale_2bit),
 
 WSS_DOUBLE("PCM Playback Switch", 0,
 		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
-WSS_DOUBLE("PCM Playback Volume", 0,
-		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1),
+WSS_DOUBLE_TLV("PCM Playback Volume", 0,
+		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1,
+		db_scale_6bit),
 
 CS4236_DOUBLE("DSP Playback Switch", 0,
 		CS4236_LEFT_DSP, CS4236_RIGHT_DSP, 7, 7, 1, 1),
-CS4236_DOUBLE("DSP Playback Volume", 0,
-		CS4236_LEFT_DSP, CS4236_RIGHT_DSP, 0, 0, 63, 1),
+CS4236_DOUBLE_TLV("DSP Playback Volume", 0,
+		  CS4236_LEFT_DSP, CS4236_RIGHT_DSP, 0, 0, 63, 1,
+		  db_scale_6bit),
 
 CS4236_DOUBLE("FM Playback Switch", 0,
 		CS4236_LEFT_FM, CS4236_RIGHT_FM, 7, 7, 1, 1),
-CS4236_DOUBLE("FM Playback Volume", 0,
-		CS4236_LEFT_FM, CS4236_RIGHT_FM, 0, 0, 63, 1),
+CS4236_DOUBLE_TLV("FM Playback Volume", 0,
+		  CS4236_LEFT_FM, CS4236_RIGHT_FM, 0, 0, 63, 1,
+		  db_scale_6bit),
 
 CS4236_DOUBLE("Wavetable Playback Switch", 0,
 		CS4236_LEFT_WAVE, CS4236_RIGHT_WAVE, 7, 7, 1, 1),
-CS4236_DOUBLE("Wavetable Playback Volume", 0,
-		CS4236_LEFT_WAVE, CS4236_RIGHT_WAVE, 0, 0, 63, 1),
+CS4236_DOUBLE_TLV("Wavetable Playback Volume", 0,
+		  CS4236_LEFT_WAVE, CS4236_RIGHT_WAVE, 0, 0, 63, 1,
+		  db_scale_6bit_12db_max),
 
 WSS_DOUBLE("Synth Playback Switch", 0,
 		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
-WSS_DOUBLE("Synth Volume", 0,
-		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Synth Volume", 0,
+		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 WSS_DOUBLE("Synth Capture Switch", 0,
 		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 6, 6, 1, 1),
 WSS_DOUBLE("Synth Capture Bypass", 0,
@@ -764,14 +825,16 @@
 		CS4236_LEFT_MIC, CS4236_RIGHT_MIC, 6, 6, 1, 1),
 CS4236_DOUBLE("Mic Capture Switch", 0,
 		CS4236_LEFT_MIC, CS4236_RIGHT_MIC, 7, 7, 1, 1),
-CS4236_DOUBLE("Mic Volume", 0, CS4236_LEFT_MIC, CS4236_RIGHT_MIC, 0, 0, 31, 1),
-CS4236_DOUBLE("Mic Playback Boost", 0,
+CS4236_DOUBLE_TLV("Mic Volume", 0, CS4236_LEFT_MIC, CS4236_RIGHT_MIC,
+		  0, 0, 31, 1, db_scale_5bit_22db_max),
+CS4236_DOUBLE("Mic Playback Boost (+20dB)", 0,
 		CS4236_LEFT_MIC, CS4236_RIGHT_MIC, 5, 5, 1, 0),
 
 WSS_DOUBLE("Line Playback Switch", 0,
 		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Line Volume", 0,
-		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Line Volume", 0,
+		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 WSS_DOUBLE("Line Capture Switch", 0,
 		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 6, 6, 1, 1),
 WSS_DOUBLE("Line Capture Bypass", 0,
@@ -779,57 +842,63 @@
 
 WSS_DOUBLE("CD Playback Switch", 0,
 		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("CD Volume", 0,
-		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("CD Volume", 0,
+		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 WSS_DOUBLE("CD Capture Switch", 0,
 		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 6, 6, 1, 1),
 
 CS4236_DOUBLE1("Mono Output Playback Switch", 0,
 		CS4231_MONO_CTRL, CS4236_RIGHT_MIX_CTRL, 6, 7, 1, 1),
-CS4236_DOUBLE1("Mono Playback Switch", 0,
+CS4236_DOUBLE1("Beep Playback Switch", 0,
 		CS4231_MONO_CTRL, CS4236_LEFT_MIX_CTRL, 7, 7, 1, 1),
-WSS_SINGLE("Mono Playback Volume", 0, CS4231_MONO_CTRL, 0, 15, 1),
-WSS_SINGLE("Mono Playback Bypass", 0, CS4231_MONO_CTRL, 5, 1, 0),
+WSS_SINGLE_TLV("Beep Playback Volume", 0, CS4231_MONO_CTRL, 0, 15, 1,
+		db_scale_4bit),
+WSS_SINGLE("Beep Bypass Playback Switch", 0, CS4231_MONO_CTRL, 5, 1, 0),
 
-WSS_DOUBLE("Capture Volume", 0,
-		CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 0, 0, 15, 0),
+WSS_DOUBLE_TLV("Capture Volume", 0, CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT,
+		0, 0, 15, 0, db_scale_rec_gain),
 WSS_DOUBLE("Analog Loopback Capture Switch", 0,
 		CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 7, 7, 1, 0),
 
-WSS_SINGLE("Digital Loopback Playback Switch", 0, CS4231_LOOPBACK, 0, 1, 0),
-CS4236_DOUBLE1("Digital Loopback Playback Volume", 0,
-		CS4231_LOOPBACK, CS4236_RIGHT_LOOPBACK, 2, 0, 63, 1)
+WSS_SINGLE("Loopback Digital Playback Switch", 0, CS4231_LOOPBACK, 0, 1, 0),
+CS4236_DOUBLE1_TLV("Loopback Digital Playback Volume", 0,
+		   CS4231_LOOPBACK, CS4236_RIGHT_LOOPBACK, 2, 0, 63, 1,
+		   db_scale_6bit),
 };
 
+static const DECLARE_TLV_DB_SCALE(db_scale_5bit_6db_max, -5600, 200, 0);
+static const DECLARE_TLV_DB_SCALE(db_scale_2bit_16db_max, -2400, 800, 0);
+
 static struct snd_kcontrol_new snd_cs4235_controls[] = {
 
-WSS_DOUBLE("Master Switch", 0,
+WSS_DOUBLE("Master Playback Switch", 0,
 		CS4235_LEFT_MASTER, CS4235_RIGHT_MASTER, 7, 7, 1, 1),
-WSS_DOUBLE("Master Volume", 0,
-		CS4235_LEFT_MASTER, CS4235_RIGHT_MASTER, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Master Playback Volume", 0,
+		CS4235_LEFT_MASTER, CS4235_RIGHT_MASTER, 0, 0, 31, 1,
+		db_scale_5bit_6db_max),
 
-CS4235_OUTPUT_ACCU("Playback Volume", 0),
+CS4235_OUTPUT_ACCU("Playback Volume", 0, db_scale_2bit_16db_max),
 
-CS4236_DOUBLE("Master Digital Playback Switch", 0,
-		CS4236_LEFT_MASTER, CS4236_RIGHT_MASTER, 7, 7, 1, 1),
-CS4236_DOUBLE("Master Digital Capture Switch", 0,
-		CS4236_DAC_MUTE, CS4236_DAC_MUTE, 7, 6, 1, 1),
-CS4236_MASTER_DIGITAL("Master Digital Volume", 0),
-
-WSS_DOUBLE("Master Digital Playback Switch", 1,
+WSS_DOUBLE("Synth Playback Switch", 1,
 		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
-WSS_DOUBLE("Master Digital Capture Switch", 1,
+WSS_DOUBLE("Synth Capture Switch", 1,
 		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 6, 6, 1, 1),
-WSS_DOUBLE("Master Digital Volume", 1,
-		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Synth Volume", 1,
+		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 
-CS4236_DOUBLE("Capture Volume", 0,
-		CS4236_LEFT_MIX_CTRL, CS4236_RIGHT_MIX_CTRL, 5, 5, 3, 1),
+CS4236_DOUBLE_TLV("Capture Volume", 0,
+		  CS4236_LEFT_MIX_CTRL, CS4236_RIGHT_MIX_CTRL, 5, 5, 3, 1,
+		  db_scale_2bit),
 
-WSS_DOUBLE("PCM Switch", 0,
+WSS_DOUBLE("PCM Playback Switch", 0,
 		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
-WSS_DOUBLE("PCM Volume", 0,
-		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1),
+WSS_DOUBLE("PCM Capture Switch", 0,
+		CS4236_DAC_MUTE, CS4236_DAC_MUTE, 7, 6, 1, 1),
+WSS_DOUBLE_TLV("PCM Volume", 0,
+		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1,
+		db_scale_6bit),
 
 CS4236_DOUBLE("DSP Switch", 0, CS4236_LEFT_DSP, CS4236_RIGHT_DSP, 7, 7, 1, 1),
 
@@ -842,29 +911,29 @@
 		CS4236_LEFT_MIC, CS4236_RIGHT_MIC, 7, 7, 1, 1),
 CS4236_DOUBLE("Mic Playback Switch", 0,
 		CS4236_LEFT_MIC, CS4236_RIGHT_MIC, 6, 6, 1, 1),
-CS4236_SINGLE("Mic Volume", 0, CS4236_LEFT_MIC, 0, 31, 1),
-CS4236_SINGLE("Mic Playback Boost", 0, CS4236_LEFT_MIC, 5, 1, 0),
+CS4236_SINGLE_TLV("Mic Volume", 0, CS4236_LEFT_MIC, 0, 31, 1,
+		  db_scale_5bit_22db_max),
+CS4236_SINGLE("Mic Boost (+20dB)", 0, CS4236_LEFT_MIC, 5, 1, 0),
 
-WSS_DOUBLE("Aux Playback Switch", 0,
+WSS_DOUBLE("Line Playback Switch", 0,
 		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Capture Switch", 0,
+WSS_DOUBLE("Line Capture Switch", 0,
 		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 6, 6, 1, 1),
-WSS_DOUBLE("Aux Volume", 0,
-		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Line Volume", 0,
+		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 
-WSS_DOUBLE("Aux Playback Switch", 1,
+WSS_DOUBLE("CD Playback Switch", 1,
 		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Capture Switch", 1,
+WSS_DOUBLE("CD Capture Switch", 1,
 		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 6, 6, 1, 1),
-WSS_DOUBLE("Aux Volume", 1,
-		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("CD Volume", 1,
+		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 
-CS4236_DOUBLE1("Master Mono Switch", 0,
-		CS4231_MONO_CTRL, CS4236_RIGHT_MIX_CTRL, 6, 7, 1, 1),
-
-CS4236_DOUBLE1("Mono Switch", 0,
+CS4236_DOUBLE1("Beep Playback Switch", 0,
 		CS4231_MONO_CTRL, CS4236_LEFT_MIX_CTRL, 7, 7, 1, 1),
-WSS_SINGLE("Mono Volume", 0, CS4231_MONO_CTRL, 0, 15, 1),
+WSS_SINGLE("Beep Playback Volume", 0, CS4231_MONO_CTRL, 0, 15, 1),
 
 WSS_DOUBLE("Analog Loopback Switch", 0,
 		CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 7, 7, 1, 0),
diff --git a/sound/isa/es1688/es1688_lib.c b/sound/isa/es1688/es1688_lib.c
index 4c6e14f..c76bb00 100644
--- a/sound/isa/es1688/es1688_lib.c
+++ b/sound/isa/es1688/es1688_lib.c
@@ -982,7 +982,7 @@
 ES1688_DOUBLE("FM Playback Volume", 0, ES1688_FM_DEV, ES1688_FM_DEV, 4, 0, 15, 0),
 ES1688_DOUBLE("Mic Playback Volume", 0, ES1688_MIC_DEV, ES1688_MIC_DEV, 4, 0, 15, 0),
 ES1688_DOUBLE("Aux Playback Volume", 0, ES1688_AUX_DEV, ES1688_AUX_DEV, 4, 0, 15, 0),
-ES1688_SINGLE("PC Speaker Playback Volume", 0, ES1688_SPEAKER_DEV, 0, 7, 0),
+ES1688_SINGLE("Beep Playback Volume", 0, ES1688_SPEAKER_DEV, 0, 7, 0),
 ES1688_DOUBLE("Capture Volume", 0, ES1688_RECLEV_DEV, ES1688_RECLEV_DEV, 4, 0, 15, 0),
 ES1688_SINGLE("Capture Switch", 0, ES1688_REC_DEV, 4, 1, 1),
 {
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index 8cfbff7..9a43baa 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -102,8 +102,6 @@
 
 struct snd_es18xx {
 	unsigned long port;		/* port of ESS chip */
-	unsigned long mpu_port;		/* MPU-401 port of ESS chip */
-	unsigned long fm_port;		/* FM port */
 	unsigned long ctrl_port;	/* Control port of ESS chip */
 	struct resource *res_port;
 	struct resource *res_mpu_port;
@@ -116,12 +114,9 @@
 	unsigned short audio2_vol;	/* volume level of audio2 */
 
 	unsigned short active;		/* active channel mask */
-	unsigned int dma1_size;
-	unsigned int dma2_size;
 	unsigned int dma1_shift;
 	unsigned int dma2_shift;
 
-	struct snd_card *card;
 	struct snd_pcm *pcm;
 	struct snd_pcm_substream *playback_a_substream;
 	struct snd_pcm_substream *capture_a_substream;
@@ -136,14 +131,9 @@
 
 	spinlock_t reg_lock;
 	spinlock_t mixer_lock;
-	spinlock_t ctrl_lock;
 #ifdef CONFIG_PM
 	unsigned char pm_reg;
 #endif
-};
-
-struct snd_audiodrive {
-	struct snd_es18xx *chip;
 #ifdef CONFIG_PNP
 	struct pnp_dev *dev;
 	struct pnp_dev *devc;
@@ -359,7 +349,7 @@
 }
 
 
-static int snd_es18xx_reset(struct snd_es18xx *chip)
+static int __devinit snd_es18xx_reset(struct snd_es18xx *chip)
 {
 	int i;
         outb(0x03, chip->port + 0x06);
@@ -495,8 +485,6 @@
 	unsigned int size = snd_pcm_lib_buffer_bytes(substream);
 	unsigned int count = snd_pcm_lib_period_bytes(substream);
 
-	chip->dma2_size = size;
-
         snd_es18xx_rate_set(chip, substream, DAC2);
 
         /* Transfer Count Reload */
@@ -596,8 +584,6 @@
 	unsigned int size = snd_pcm_lib_buffer_bytes(substream);
 	unsigned int count = snd_pcm_lib_period_bytes(substream);
 
-	chip->dma1_size = size;
-
 	snd_es18xx_reset_fifo(chip);
 
         /* Set stereo/mono */
@@ -664,8 +650,6 @@
 	unsigned int size = snd_pcm_lib_buffer_bytes(substream);
 	unsigned int count = snd_pcm_lib_period_bytes(substream);
 
-	chip->dma1_size = size;
-
 	snd_es18xx_reset_fifo(chip);
 
         /* Set stereo/mono */
@@ -755,7 +739,8 @@
 
 static irqreturn_t snd_es18xx_interrupt(int irq, void *dev_id)
 {
-	struct snd_es18xx *chip = dev_id;
+	struct snd_card *card = dev_id;
+	struct snd_es18xx *chip = card->private_data;
 	unsigned char status;
 
 	if (chip->caps & ES18XX_CONTROL) {
@@ -805,12 +790,16 @@
 		int split = 0;
 		if (chip->caps & ES18XX_HWV) {
 			split = snd_es18xx_mixer_read(chip, 0x64) & 0x80;
-			snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->hw_switch->id);
-			snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->hw_volume->id);
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+					&chip->hw_switch->id);
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+					&chip->hw_volume->id);
 		}
 		if (!split) {
-			snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->master_switch->id);
-			snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->master_volume->id);
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+					&chip->master_switch->id);
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+					&chip->master_volume->id);
 		}
 		/* ack interrupt */
 		snd_es18xx_mixer_write(chip, 0x66, 0x00);
@@ -821,17 +810,18 @@
 static snd_pcm_uframes_t snd_es18xx_playback_pointer(struct snd_pcm_substream *substream)
 {
         struct snd_es18xx *chip = snd_pcm_substream_chip(substream);
+	unsigned int size = snd_pcm_lib_buffer_bytes(substream);
 	int pos;
 
 	if (substream->number == 0 && (chip->caps & ES18XX_PCM2)) {
 		if (!(chip->active & DAC2))
 			return 0;
-		pos = snd_dma_pointer(chip->dma2, chip->dma2_size);
+		pos = snd_dma_pointer(chip->dma2, size);
 		return pos >> chip->dma2_shift;
 	} else {
 		if (!(chip->active & DAC1))
 			return 0;
-		pos = snd_dma_pointer(chip->dma1, chip->dma1_size);
+		pos = snd_dma_pointer(chip->dma1, size);
 		return pos >> chip->dma1_shift;
 	}
 }
@@ -839,11 +829,12 @@
 static snd_pcm_uframes_t snd_es18xx_capture_pointer(struct snd_pcm_substream *substream)
 {
         struct snd_es18xx *chip = snd_pcm_substream_chip(substream);
+	unsigned int size = snd_pcm_lib_buffer_bytes(substream);
 	int pos;
 
         if (!(chip->active & ADC1))
                 return 0;
-	pos = snd_dma_pointer(chip->dma1, chip->dma1_size);
+	pos = snd_dma_pointer(chip->dma1, size);
 	return pos >> chip->dma1_shift;
 }
 
@@ -974,9 +965,6 @@
 
 static int snd_es18xx_info_mux(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
-	static char *texts4Source[4] = {
-		"Mic", "CD", "Line", "Master"
-	};
 	static char *texts5Source[5] = {
 		"Mic", "CD", "Line", "Master", "Mix"
 	};
@@ -994,7 +982,8 @@
 		uinfo->value.enumerated.items = 4;
 		if (uinfo->value.enumerated.item > 3)
 			uinfo->value.enumerated.item = 3;
-		strcpy(uinfo->value.enumerated.name, texts4Source[uinfo->value.enumerated.item]);
+		strcpy(uinfo->value.enumerated.name,
+			texts5Source[uinfo->value.enumerated.item]);
 		break;
 	case 0x1887:
 	case 0x1888:
@@ -1313,7 +1302,7 @@
  * The chipset specific mixer controls
  */
 static struct snd_kcontrol_new snd_es18xx_opt_speaker =
-	ES18XX_SINGLE("PC Speaker Playback Volume", 0, 0x3c, 0, 7, 0);
+	ES18XX_SINGLE("Beep Playback Volume", 0, 0x3c, 0, 7, 0);
 
 static struct snd_kcontrol_new snd_es18xx_opt_1869[] = {
 ES18XX_SINGLE("Capture Switch", 0, 0x1c, 4, 1, 1),
@@ -1378,11 +1367,9 @@
 static int __devinit snd_es18xx_config_read(struct snd_es18xx *chip, unsigned char reg)
 {
 	int data;
-	unsigned long flags;
-        spin_lock_irqsave(&chip->ctrl_lock, flags);
+
 	outb(reg, chip->ctrl_port);
 	data = inb(chip->ctrl_port + 1);
-        spin_unlock_irqrestore(&chip->ctrl_lock, flags);
 	return data;
 }
 
@@ -1398,7 +1385,9 @@
 #endif
 }
 
-static int __devinit snd_es18xx_initialize(struct snd_es18xx *chip)
+static int __devinit snd_es18xx_initialize(struct snd_es18xx *chip,
+					   unsigned long mpu_port,
+					   unsigned long fm_port)
 {
 	int mask = 0;
 
@@ -1412,15 +1401,15 @@
 	if (chip->caps & ES18XX_CONTROL) {
 		/* Hardware volume IRQ */
 		snd_es18xx_config_write(chip, 0x27, chip->irq);
-		if (chip->fm_port > 0 && chip->fm_port != SNDRV_AUTO_PORT) {
+		if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) {
 			/* FM I/O */
-			snd_es18xx_config_write(chip, 0x62, chip->fm_port >> 8);
-			snd_es18xx_config_write(chip, 0x63, chip->fm_port & 0xff);
+			snd_es18xx_config_write(chip, 0x62, fm_port >> 8);
+			snd_es18xx_config_write(chip, 0x63, fm_port & 0xff);
 		}
-		if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
+		if (mpu_port > 0 && mpu_port != SNDRV_AUTO_PORT) {
 			/* MPU-401 I/O */
-			snd_es18xx_config_write(chip, 0x64, chip->mpu_port >> 8);
-			snd_es18xx_config_write(chip, 0x65, chip->mpu_port & 0xff);
+			snd_es18xx_config_write(chip, 0x64, mpu_port >> 8);
+			snd_es18xx_config_write(chip, 0x65, mpu_port & 0xff);
 			/* MPU-401 IRQ */
 			snd_es18xx_config_write(chip, 0x28, chip->irq);
 		}
@@ -1507,11 +1496,12 @@
 		snd_es18xx_mixer_write(chip, 0x7A, 0x68);
 		/* Enable and set hardware volume interrupt */
 		snd_es18xx_mixer_write(chip, 0x64, 0x06);
-		if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
+		if (mpu_port > 0 && mpu_port != SNDRV_AUTO_PORT) {
 			/* MPU401 share irq with audio
 			   Joystick enabled
 			   FM enabled */
-			snd_es18xx_mixer_write(chip, 0x40, 0x43 | (chip->mpu_port & 0xf0) >> 1);
+			snd_es18xx_mixer_write(chip, 0x40,
+					       0x43 | (mpu_port & 0xf0) >> 1);
 		}
 		snd_es18xx_mixer_write(chip, 0x7f, ((irqmask + 1) << 1) | 0x01);
 	}
@@ -1629,7 +1619,9 @@
 	return 0;
 }
 
-static int __devinit snd_es18xx_probe(struct snd_es18xx *chip)
+static int __devinit snd_es18xx_probe(struct snd_es18xx *chip,
+					unsigned long mpu_port,
+					unsigned long fm_port)
 {
 	if (snd_es18xx_identify(chip) < 0) {
 		snd_printk(KERN_ERR PFX "[0x%lx] ESS chip not found\n", chip->port);
@@ -1650,8 +1642,6 @@
 		chip->caps = ES18XX_PCM2 | ES18XX_SPATIALIZER | ES18XX_RECMIX | ES18XX_NEW_RATE | ES18XX_AUXB | ES18XX_I2S | ES18XX_CONTROL | ES18XX_HWV;
 		break;
 	case 0x1887:
-		chip->caps = ES18XX_PCM2 | ES18XX_RECMIX | ES18XX_AUXB | ES18XX_DUPLEX_SAME;
-		break;
 	case 0x1888:
 		chip->caps = ES18XX_PCM2 | ES18XX_RECMIX | ES18XX_AUXB | ES18XX_DUPLEX_SAME;
 		break;
@@ -1666,7 +1656,7 @@
 	if (chip->dma1 == chip->dma2)
 		chip->caps &= ~(ES18XX_PCM2 | ES18XX_DUPLEX_SAME);
 
-        return snd_es18xx_initialize(chip);
+	return snd_es18xx_initialize(chip, mpu_port, fm_port);
 }
 
 static struct snd_pcm_ops snd_es18xx_playback_ops = {
@@ -1691,8 +1681,10 @@
 	.pointer =	snd_es18xx_capture_pointer,
 };
 
-static int __devinit snd_es18xx_pcm(struct snd_es18xx *chip, int device, struct snd_pcm ** rpcm)
+static int __devinit snd_es18xx_pcm(struct snd_card *card, int device,
+				    struct snd_pcm **rpcm)
 {
+	struct snd_es18xx *chip = card->private_data;
         struct snd_pcm *pcm;
 	char str[16];
 	int err;
@@ -1701,9 +1693,9 @@
 		*rpcm = NULL;
 	sprintf(str, "ES%x", chip->version);
 	if (chip->caps & ES18XX_PCM2)
-		err = snd_pcm_new(chip->card, str, device, 2, 1, &pcm);
+		err = snd_pcm_new(card, str, device, 2, 1, &pcm);
 	else
-		err = snd_pcm_new(chip->card, str, device, 1, 1, &pcm);
+		err = snd_pcm_new(card, str, device, 1, 1, &pcm);
         if (err < 0)
                 return err;
 
@@ -1734,10 +1726,9 @@
 #ifdef CONFIG_PM
 static int snd_es18xx_suspend(struct snd_card *card, pm_message_t state)
 {
-	struct snd_audiodrive *acard = card->private_data;
-	struct snd_es18xx *chip = acard->chip;
+	struct snd_es18xx *chip = card->private_data;
 
-	snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
+	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
 
 	snd_pcm_suspend_all(chip->pcm);
 
@@ -1752,24 +1743,25 @@
 
 static int snd_es18xx_resume(struct snd_card *card)
 {
-	struct snd_audiodrive *acard = card->private_data;
-	struct snd_es18xx *chip = acard->chip;
+	struct snd_es18xx *chip = card->private_data;
 
 	/* restore PM register, we won't wake till (not 0x07) i/o activity though */
 	snd_es18xx_write(chip, ES18XX_PM, chip->pm_reg ^= ES18XX_PM_FM);
 
-	snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
+	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 	return 0;
 }
 #endif /* CONFIG_PM */
 
-static int snd_es18xx_free(struct snd_es18xx *chip)
+static int snd_es18xx_free(struct snd_card *card)
 {
+	struct snd_es18xx *chip = card->private_data;
+
 	release_and_free_resource(chip->res_port);
 	release_and_free_resource(chip->res_ctrl_port);
 	release_and_free_resource(chip->res_mpu_port);
 	if (chip->irq >= 0)
-		free_irq(chip->irq, (void *) chip);
+		free_irq(chip->irq, (void *) card);
 	if (chip->dma1 >= 0) {
 		disable_dma(chip->dma1);
 		free_dma(chip->dma1);
@@ -1778,93 +1770,82 @@
 		disable_dma(chip->dma2);
 		free_dma(chip->dma2);
 	}
-	kfree(chip);
 	return 0;
 }
 
 static int snd_es18xx_dev_free(struct snd_device *device)
 {
-	struct snd_es18xx *chip = device->device_data;
-	return snd_es18xx_free(chip);
+	return snd_es18xx_free(device->card);
 }
 
 static int __devinit snd_es18xx_new_device(struct snd_card *card,
 					   unsigned long port,
 					   unsigned long mpu_port,
 					   unsigned long fm_port,
-					   int irq, int dma1, int dma2,
-					   struct snd_es18xx ** rchip)
+					   int irq, int dma1, int dma2)
 {
-        struct snd_es18xx *chip;
+	struct snd_es18xx *chip = card->private_data;
 	static struct snd_device_ops ops = {
 		.dev_free =	snd_es18xx_dev_free,
         };
 	int err;
 
-	*rchip = NULL;
-        chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-	if (chip == NULL)
-		return -ENOMEM;
 	spin_lock_init(&chip->reg_lock);
  	spin_lock_init(&chip->mixer_lock);
- 	spin_lock_init(&chip->ctrl_lock);
-        chip->card = card;
         chip->port = port;
-        chip->mpu_port = mpu_port;
-        chip->fm_port = fm_port;
         chip->irq = -1;
         chip->dma1 = -1;
         chip->dma2 = -1;
         chip->audio2_vol = 0x00;
 	chip->active = 0;
 
-	if ((chip->res_port = request_region(port, 16, "ES18xx")) == NULL) {
-		snd_es18xx_free(chip);
+	chip->res_port = request_region(port, 16, "ES18xx");
+	if (chip->res_port == NULL) {
+		snd_es18xx_free(card);
 		snd_printk(KERN_ERR PFX "unable to grap ports 0x%lx-0x%lx\n", port, port + 16 - 1);
 		return -EBUSY;
 	}
 
-	if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx", (void *) chip)) {
-		snd_es18xx_free(chip);
+	if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx",
+			(void *) card)) {
+		snd_es18xx_free(card);
 		snd_printk(KERN_ERR PFX "unable to grap IRQ %d\n", irq);
 		return -EBUSY;
 	}
 	chip->irq = irq;
 
 	if (request_dma(dma1, "ES18xx DMA 1")) {
-		snd_es18xx_free(chip);
+		snd_es18xx_free(card);
 		snd_printk(KERN_ERR PFX "unable to grap DMA1 %d\n", dma1);
 		return -EBUSY;
 	}
 	chip->dma1 = dma1;
 
 	if (dma2 != dma1 && request_dma(dma2, "ES18xx DMA 2")) {
-		snd_es18xx_free(chip);
+		snd_es18xx_free(card);
 		snd_printk(KERN_ERR PFX "unable to grap DMA2 %d\n", dma2);
 		return -EBUSY;
 	}
 	chip->dma2 = dma2;
 
-        if (snd_es18xx_probe(chip) < 0) {
-                snd_es18xx_free(chip);
-                return -ENODEV;
-        }
-	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
-		snd_es18xx_free(chip);
+	if (snd_es18xx_probe(chip, mpu_port, fm_port) < 0) {
+		snd_es18xx_free(card);
+		return -ENODEV;
+	}
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (err < 0) {
+		snd_es18xx_free(card);
 		return err;
 	}
-        *rchip = chip;
         return 0;
 }
 
-static int __devinit snd_es18xx_mixer(struct snd_es18xx *chip)
+static int __devinit snd_es18xx_mixer(struct snd_card *card)
 {
-	struct snd_card *card;
+	struct snd_es18xx *chip = card->private_data;
 	int err;
 	unsigned int idx;
 
-	card = chip->card;
-
 	strcpy(card->mixername, chip->pcm->name);
 
 	for (idx = 0; idx < ARRAY_SIZE(snd_es18xx_base_controls); idx++) {
@@ -1986,7 +1967,7 @@
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
 #ifdef CONFIG_PNP
-static int isapnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
+static int isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
 #endif
 static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;	/* 0x220,0x240,0x260,0x280 */
 #ifndef CONFIG_PNP
@@ -2063,11 +2044,11 @@
 	return 0;
 }
 
-static int __devinit snd_audiodrive_pnp(int dev, struct snd_audiodrive *acard,
+static int __devinit snd_audiodrive_pnp(int dev, struct snd_es18xx *chip,
 					struct pnp_dev *pdev)
 {
-	acard->dev = pdev;
-	if (snd_audiodrive_pnp_init_main(dev, acard->dev) < 0)
+	chip->dev = pdev;
+	if (snd_audiodrive_pnp_init_main(dev, chip->dev) < 0)
 		return -EBUSY;
 	return 0;
 }
@@ -2093,26 +2074,26 @@
 
 MODULE_DEVICE_TABLE(pnp_card, snd_audiodrive_pnpids);
 
-static int __devinit snd_audiodrive_pnpc(int dev, struct snd_audiodrive *acard,
+static int __devinit snd_audiodrive_pnpc(int dev, struct snd_es18xx *chip,
 					struct pnp_card_link *card,
 					const struct pnp_card_device_id *id)
 {
-	acard->dev = pnp_request_card_device(card, id->devs[0].id, NULL);
-	if (acard->dev == NULL)
+	chip->dev = pnp_request_card_device(card, id->devs[0].id, NULL);
+	if (chip->dev == NULL)
 		return -EBUSY;
 
-	acard->devc = pnp_request_card_device(card, id->devs[1].id, NULL);
-	if (acard->devc == NULL)
+	chip->devc = pnp_request_card_device(card, id->devs[1].id, NULL);
+	if (chip->devc == NULL)
 		return -EBUSY;
 
 	/* Control port initialization */
-	if (pnp_activate_dev(acard->devc) < 0) {
+	if (pnp_activate_dev(chip->devc) < 0) {
 		snd_printk(KERN_ERR PFX "PnP control configure failure (out of resources?)\n");
 		return -EAGAIN;
 	}
 	snd_printdd("pnp: port=0x%llx\n",
-			(unsigned long long)pnp_port_start(acard->devc, 0));
-	if (snd_audiodrive_pnp_init_main(dev, acard->dev) < 0)
+			(unsigned long long)pnp_port_start(chip->devc, 0));
+	if (snd_audiodrive_pnp_init_main(dev, chip->dev) < 0)
 		return -EBUSY;
 
 	return 0;
@@ -2128,24 +2109,20 @@
 static int snd_es18xx_card_new(int dev, struct snd_card **cardp)
 {
 	return snd_card_create(index[dev], id[dev], THIS_MODULE,
-			       sizeof(struct snd_audiodrive), cardp);
+			       sizeof(struct snd_es18xx), cardp);
 }
 
 static int __devinit snd_audiodrive_probe(struct snd_card *card, int dev)
 {
-	struct snd_audiodrive *acard = card->private_data;
-	struct snd_es18xx *chip;
+	struct snd_es18xx *chip = card->private_data;
 	struct snd_opl3 *opl3;
 	int err;
 
-	if ((err = snd_es18xx_new_device(card,
-					 port[dev],
-					 mpu_port[dev],
-					 fm_port[dev],
-					 irq[dev], dma1[dev], dma2[dev],
-					 &chip)) < 0)
+	err = snd_es18xx_new_device(card,
+				    port[dev], mpu_port[dev], fm_port[dev],
+				    irq[dev], dma1[dev], dma2[dev]);
+	if (err < 0)
 		return err;
-	acard->chip = chip;
 
 	sprintf(card->driver, "ES%x", chip->version);
 	
@@ -2161,26 +2138,32 @@
 			chip->port,
 			irq[dev], dma1[dev]);
 
-	if ((err = snd_es18xx_pcm(chip, 0, NULL)) < 0)
+	err = snd_es18xx_pcm(card, 0, NULL);
+	if (err < 0)
 		return err;
 
-	if ((err = snd_es18xx_mixer(chip)) < 0)
+	err = snd_es18xx_mixer(card);
+	if (err < 0)
 		return err;
 
 	if (fm_port[dev] > 0 && fm_port[dev] != SNDRV_AUTO_PORT) {
-		if (snd_opl3_create(card, chip->fm_port, chip->fm_port + 2, OPL3_HW_OPL3, 0, &opl3) < 0) {
-			snd_printk(KERN_WARNING PFX "opl3 not detected at 0x%lx\n", chip->fm_port);
+		if (snd_opl3_create(card, fm_port[dev], fm_port[dev] + 2,
+				    OPL3_HW_OPL3, 0, &opl3) < 0) {
+			snd_printk(KERN_WARNING PFX
+				   "opl3 not detected at 0x%lx\n",
+				   fm_port[dev]);
 		} else {
-			if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0)
+			err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
+			if (err < 0)
 				return err;
 		}
 	}
 
 	if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
-		if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
-					       chip->mpu_port, 0,
-					       irq[dev], 0,
-					       &chip->rmidi)) < 0)
+		err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
+					  mpu_port[dev], 0,
+					  irq[dev], 0, &chip->rmidi);
+		if (err < 0)
 			return err;
 	}
 
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 02e30d7..6123c75 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -25,6 +25,7 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/isa.h>
+#include <linux/pnp.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
@@ -40,7 +41,7 @@
 #define SNDRV_LEGACY_FIND_FREE_IRQ
 #define SNDRV_LEGACY_FIND_FREE_DMA
 #include <sound/initval.h>
-#include "miro.h"
+#include <sound/aci.h>
 
 MODULE_AUTHOR("Martin Langer <martin-langer@gmx.de>");
 MODULE_LICENSE("GPL");
@@ -60,6 +61,9 @@
 static int dma2 = SNDRV_DEFAULT_DMA1;		/* 0,1,3 */
 static int wss;
 static int ide;
+#ifdef CONFIG_PNP
+static int isapnp = 1;				/* Enable ISA PnP detection */
+#endif
 
 module_param(index, int, 0444);
 MODULE_PARM_DESC(index, "Index value for miro soundcard.");
@@ -83,6 +87,10 @@
 MODULE_PARM_DESC(wss, "wss mode");
 module_param(ide, int, 0444);
 MODULE_PARM_DESC(ide, "enable ide port");
+#ifdef CONFIG_PNP
+module_param(isapnp, bool, 0444);
+MODULE_PARM_DESC(isapnp, "Enable ISA PnP detection for specified soundcard.");
+#endif
 
 #define OPTi9XX_HW_DETECT	0
 #define OPTi9XX_HW_82C928	1
@@ -96,7 +104,6 @@
 
 #define OPTi9XX_MC_REG(n)	n
 
-
 struct snd_miro {
 	unsigned short hardware;
 	unsigned char password;
@@ -110,7 +117,6 @@
 	unsigned long pwd_reg;
 
 	spinlock_t lock;
-	struct snd_card *card;
 	struct snd_pcm *pcm;
 
 	long wss_base;
@@ -118,23 +124,13 @@
 	int dma1;
 	int dma2;
 
-	long fm_port;
-
 	long mpu_port;
 	int mpu_irq;
 
-	unsigned long aci_port;
-	int aci_vendor;
-	int aci_product;
-	int aci_version;
-	int aci_amp;
-	int aci_preamp;
-	int aci_solomode;
-
-	struct mutex aci_mutex;
+	struct snd_miro_aci *aci;
 };
 
-static void snd_miro_proc_init(struct snd_miro * miro);
+static struct snd_miro_aci aci_device;
 
 static char * snd_opti9xx_names[] = {
 	"unkown",
@@ -143,17 +139,33 @@
 	"82C930", "82C931", "82C933"
 };
 
+static int snd_miro_pnp_is_probed;
+
+#ifdef CONFIG_PNP
+
+static struct pnp_card_device_id snd_miro_pnpids[] = {
+	/* PCM20 and PCM12 in PnP mode */
+	{ .id = "MIR0924",
+	  .devs = { { "MIR0000" }, { "MIR0002" }, { "MIR0005" } }, },
+	{ .id = "" }
+};
+
+MODULE_DEVICE_TABLE(pnp_card, snd_miro_pnpids);
+
+#endif	/* CONFIG_PNP */
+
 /* 
  *  ACI control
  */
 
-static int aci_busy_wait(struct snd_miro * miro)
+static int aci_busy_wait(struct snd_miro_aci *aci)
 {
 	long timeout;
 	unsigned char byte;
 
-	for (timeout = 1; timeout <= ACI_MINTIME+30; timeout++) {
-		if (((byte=inb(miro->aci_port + ACI_REG_BUSY)) & 1) == 0) {
+	for (timeout = 1; timeout <= ACI_MINTIME + 30; timeout++) {
+		byte = inb(aci->aci_port + ACI_REG_BUSY);
+		if ((byte & 1) == 0) {
 			if (timeout >= ACI_MINTIME)
 				snd_printd("aci ready in round %ld.\n",
 					   timeout-ACI_MINTIME);
@@ -179,10 +191,10 @@
 	return -EBUSY;
 }
 
-static inline int aci_write(struct snd_miro * miro, unsigned char byte)
+static inline int aci_write(struct snd_miro_aci *aci, unsigned char byte)
 {
-	if (aci_busy_wait(miro) >= 0) {
-		outb(byte, miro->aci_port + ACI_REG_COMMAND);
+	if (aci_busy_wait(aci) >= 0) {
+		outb(byte, aci->aci_port + ACI_REG_COMMAND);
 		return 0;
 	} else {
 		snd_printk(KERN_ERR "aci busy, aci_write(0x%x) stopped.\n", byte);
@@ -190,12 +202,12 @@
 	}
 }
 
-static inline int aci_read(struct snd_miro * miro)
+static inline int aci_read(struct snd_miro_aci *aci)
 {
 	unsigned char byte;
 
-	if (aci_busy_wait(miro) >= 0) {
-		byte=inb(miro->aci_port + ACI_REG_STATUS);
+	if (aci_busy_wait(aci) >= 0) {
+		byte = inb(aci->aci_port + ACI_REG_STATUS);
 		return byte;
 	} else {
 		snd_printk(KERN_ERR "aci busy, aci_read() stopped.\n");
@@ -203,40 +215,50 @@
 	}
 }
 
-static int aci_cmd(struct snd_miro * miro, int write1, int write2, int write3)
+int snd_aci_cmd(struct snd_miro_aci *aci, int write1, int write2, int write3)
 {
 	int write[] = {write1, write2, write3};
 	int value, i;
 
-	if (mutex_lock_interruptible(&miro->aci_mutex))
+	if (mutex_lock_interruptible(&aci->aci_mutex))
 		return -EINTR;
 
 	for (i=0; i<3; i++) {
 		if (write[i]< 0 || write[i] > 255)
 			break;
 		else {
-			value = aci_write(miro, write[i]);
+			value = aci_write(aci, write[i]);
 			if (value < 0)
 				goto out;
 		}
 	}
 
-	value = aci_read(miro);
+	value = aci_read(aci);
 
-out:	mutex_unlock(&miro->aci_mutex);
+out:	mutex_unlock(&aci->aci_mutex);
 	return value;
 }
+EXPORT_SYMBOL(snd_aci_cmd);
 
-static int aci_getvalue(struct snd_miro * miro, unsigned char index)
+static int aci_getvalue(struct snd_miro_aci *aci, unsigned char index)
 {
-	return aci_cmd(miro, ACI_STATUS, index, -1);
+	return snd_aci_cmd(aci, ACI_STATUS, index, -1);
 }
 
-static int aci_setvalue(struct snd_miro * miro, unsigned char index, int value)
+static int aci_setvalue(struct snd_miro_aci *aci, unsigned char index,
+			int value)
 {
-	return aci_cmd(miro, index, value, -1);
+	return snd_aci_cmd(aci, index, value, -1);
 }
 
+struct snd_miro_aci *snd_aci_get_aci(void)
+{
+	if (aci_device.aci_port == 0)
+		return NULL;
+	return &aci_device;
+}
+EXPORT_SYMBOL(snd_aci_get_aci);
+
 /*
  *  MIXER part
  */
@@ -249,8 +271,10 @@
 	struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
 	int value;
 
-	if ((value = aci_getvalue(miro, ACI_S_GENERAL)) < 0) {
-		snd_printk(KERN_ERR "snd_miro_get_capture() failed: %d\n", value);
+	value = aci_getvalue(miro->aci, ACI_S_GENERAL);
+	if (value < 0) {
+		snd_printk(KERN_ERR "snd_miro_get_capture() failed: %d\n",
+			   value);
 		return value;
 	}
 
@@ -267,13 +291,15 @@
 
 	value = !(ucontrol->value.integer.value[0]);
 
-	if ((error = aci_setvalue(miro, ACI_SET_SOLOMODE, value)) < 0) {
-		snd_printk(KERN_ERR "snd_miro_put_capture() failed: %d\n", error);
+	error = aci_setvalue(miro->aci, ACI_SET_SOLOMODE, value);
+	if (error < 0) {
+		snd_printk(KERN_ERR "snd_miro_put_capture() failed: %d\n",
+			   error);
 		return error;
 	}
 
-	change = (value != miro->aci_solomode);
-	miro->aci_solomode = value;
+	change = (value != miro->aci->aci_solomode);
+	miro->aci->aci_solomode = value;
 	
 	return change;
 }
@@ -295,7 +321,7 @@
 	struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
 	int value;
 
-	if (miro->aci_version <= 176) {
+	if (miro->aci->aci_version <= 176) {
 
 		/* 
 		   OSS says it's not readable with versions < 176.
@@ -303,12 +329,14 @@
 		   which is a PCM12 with aci_version = 176.
 		*/
 
-		ucontrol->value.integer.value[0] = miro->aci_preamp;
+		ucontrol->value.integer.value[0] = miro->aci->aci_preamp;
 		return 0;
 	}
 
-	if ((value = aci_getvalue(miro, ACI_GET_PREAMP)) < 0) {
-		snd_printk(KERN_ERR "snd_miro_get_preamp() failed: %d\n", value);
+	value = aci_getvalue(miro->aci, ACI_GET_PREAMP);
+	if (value < 0) {
+		snd_printk(KERN_ERR "snd_miro_get_preamp() failed: %d\n",
+			   value);
 		return value;
 	}
 	
@@ -325,13 +353,15 @@
 
 	value = ucontrol->value.integer.value[0];
 
-	if ((error = aci_setvalue(miro, ACI_SET_PREAMP, value)) < 0) {
-		snd_printk(KERN_ERR "snd_miro_put_preamp() failed: %d\n", error);
+	error = aci_setvalue(miro->aci, ACI_SET_PREAMP, value);
+	if (error < 0) {
+		snd_printk(KERN_ERR "snd_miro_put_preamp() failed: %d\n",
+			   error);
 		return error;
 	}
 
-	change = (value != miro->aci_preamp);
-	miro->aci_preamp = value;
+	change = (value != miro->aci->aci_preamp);
+	miro->aci->aci_preamp = value;
 
 	return change;
 }
@@ -342,7 +372,7 @@
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
-	ucontrol->value.integer.value[0] = miro->aci_amp;
+	ucontrol->value.integer.value[0] = miro->aci->aci_amp;
 
 	return 0;
 }
@@ -355,13 +385,14 @@
 
 	value = ucontrol->value.integer.value[0];
 
-	if ((error = aci_setvalue(miro, ACI_SET_POWERAMP, value)) < 0) {
+	error = aci_setvalue(miro->aci, ACI_SET_POWERAMP, value);
+	if (error < 0) {
 		snd_printk(KERN_ERR "snd_miro_put_amp() to %d failed: %d\n", value, error);
 		return error;
 	}
 
-	change = (value != miro->aci_amp);
-	miro->aci_amp = value;
+	change = (value != miro->aci->aci_amp);
+	miro->aci->aci_amp = value;
 
 	return change;
 }
@@ -410,12 +441,14 @@
 	int right_reg = kcontrol->private_value & 0xff;
 	int left_reg = right_reg + 1;
 
-	if ((right_val = aci_getvalue(miro, right_reg)) < 0) {
+	right_val = aci_getvalue(miro->aci, right_reg);
+	if (right_val < 0) {
 		snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", right_reg, right_val);
 		return right_val;
 	}
 
-	if ((left_val = aci_getvalue(miro, left_reg)) < 0) {
+	left_val = aci_getvalue(miro->aci, left_reg);
+	if (left_val < 0) {
 		snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", left_reg, left_val);
 		return left_val;
 	}
@@ -451,6 +484,7 @@
 			       struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_miro *miro = snd_kcontrol_chip(kcontrol);
+	struct snd_miro_aci *aci = miro->aci;
 	int left, right, left_old, right_old;
 	int setreg_left, setreg_right, getreg_left, getreg_right;
 	int change, error;
@@ -459,21 +493,21 @@
 	right = ucontrol->value.integer.value[1];
 
 	setreg_right = (kcontrol->private_value >> 8) & 0xff;
-	if (setreg_right == ACI_SET_MASTER) {
-		setreg_left = setreg_right + 1;
-	} else {
-		setreg_left = setreg_right + 8;
-	}
+	setreg_left = setreg_right + 8;
+	if (setreg_right == ACI_SET_MASTER)
+		setreg_left -= 7;
 
 	getreg_right = kcontrol->private_value & 0xff;
 	getreg_left = getreg_right + 1;
 
-	if ((left_old = aci_getvalue(miro, getreg_left)) < 0) {
+	left_old = aci_getvalue(aci, getreg_left);
+	if (left_old < 0) {
 		snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_left, left_old);
 		return left_old;
 	}
 
-	if ((right_old = aci_getvalue(miro, getreg_right)) < 0) {
+	right_old = aci_getvalue(aci, getreg_right);
+	if (right_old < 0) {
 		snd_printk(KERN_ERR "aci_getvalue(%d) failed: %d\n", getreg_right, right_old);
 		return right_old;
 	}
@@ -492,13 +526,15 @@
 			right_old = 0x80 - right_old;
 
 		if (left >= 0) {
-			if ((error = aci_setvalue(miro, setreg_left, left)) < 0) {
+			error = aci_setvalue(aci, setreg_left, left);
+			if (error < 0) {
 				snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
 					   left, error);
 				return error;
 			}
 		} else {
-			if ((error = aci_setvalue(miro, setreg_left, 0x80 - left)) < 0) {
+			error = aci_setvalue(aci, setreg_left, 0x80 - left);
+			if (error < 0) {
 				snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
 					   0x80 - left, error);
 				return error;
@@ -506,13 +542,15 @@
 		}
 
 		if (right >= 0) {
-			if ((error = aci_setvalue(miro, setreg_right, right)) < 0) {
+			error = aci_setvalue(aci, setreg_right, right);
+			if (error < 0) {
 				snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
 					   right, error);
 				return error;
 			}
 		} else {
-			if ((error = aci_setvalue(miro, setreg_right, 0x80 - right)) < 0) {
+			error = aci_setvalue(aci, setreg_right, 0x80 - right);
+			if (error < 0) {
 				snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
 					   0x80 - right, error);
 				return error;
@@ -530,12 +568,14 @@
 		left_old = 0x20 - left_old;
 		right_old = 0x20 - right_old;
 
-		if ((error = aci_setvalue(miro, setreg_left, 0x20 - left)) < 0) {
+		error = aci_setvalue(aci, setreg_left, 0x20 - left);
+		if (error < 0) {
 			snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
 				   0x20 - left, error);
 			return error;
 		}
-		if ((error = aci_setvalue(miro, setreg_right, 0x20 - right)) < 0) {
+		error = aci_setvalue(aci, setreg_right, 0x20 - right);
+		if (error < 0) {
 			snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n",
 				   0x20 - right, error);
 			return error;
@@ -633,11 +673,13 @@
 static int __devinit snd_set_aci_init_values(struct snd_miro *miro)
 {
 	int idx, error;
+	struct snd_miro_aci *aci = miro->aci;
 
 	/* enable WSS on PCM1 */
 
-	if ((miro->aci_product == 'A') && wss) {
-		if ((error = aci_setvalue(miro, ACI_SET_WSS, wss)) < 0) {
+	if ((aci->aci_product == 'A') && wss) {
+		error = aci_setvalue(aci, ACI_SET_WSS, wss);
+		if (error < 0) {
 			snd_printk(KERN_ERR "enabling WSS mode failed\n");
 			return error;
 		}
@@ -646,7 +688,8 @@
 	/* enable IDE port */
 
 	if (ide) {
-		if ((error = aci_setvalue(miro, ACI_SET_IDE, ide)) < 0) {
+		error = aci_setvalue(aci, ACI_SET_IDE, ide);
+		if (error < 0) {
 			snd_printk(KERN_ERR "enabling IDE port failed\n");
 			return error;
 		}
@@ -654,32 +697,31 @@
 
 	/* set common aci values */
 
-	for (idx = 0; idx < ARRAY_SIZE(aci_init_values); idx++)
-                if ((error = aci_setvalue(miro, aci_init_values[idx][0], 
-					  aci_init_values[idx][1])) < 0) {
+	for (idx = 0; idx < ARRAY_SIZE(aci_init_values); idx++) {
+		error = aci_setvalue(aci, aci_init_values[idx][0],
+				     aci_init_values[idx][1]);
+		if (error < 0) {
 			snd_printk(KERN_ERR "aci_setvalue(%d) failed: %d\n", 
 				   aci_init_values[idx][0], error);
                         return error;
                 }
-
-	miro->aci_amp = 0;
-	miro->aci_preamp = 0;
-	miro->aci_solomode = 1;
+	}
+	aci->aci_amp = 0;
+	aci->aci_preamp = 0;
+	aci->aci_solomode = 1;
 
 	return 0;
 }
 
-static int __devinit snd_miro_mixer(struct snd_miro *miro)
+static int __devinit snd_miro_mixer(struct snd_card *card,
+				    struct snd_miro *miro)
 {
-	struct snd_card *card;
 	unsigned int idx;
 	int err;
 
-	if (snd_BUG_ON(!miro || !miro->card))
+	if (snd_BUG_ON(!miro || !card))
 		return -EINVAL;
 
-	card = miro->card;
-
 	switch (miro->hardware) {
 	case OPTi9XX_HW_82C924:
 		strcpy(card->mixername, "ACI & OPTi924");
@@ -697,7 +739,8 @@
 			return err;
 	}
 
-	if ((miro->aci_product == 'A') || (miro->aci_product == 'B')) {
+	if ((miro->aci->aci_product == 'A') ||
+	    (miro->aci->aci_product == 'B')) {
 		/* PCM1/PCM12 with power-amp and Line 2 */
 		if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_line_control[0], miro))) < 0)
 			return err;
@@ -705,16 +748,17 @@
 			return err;
 	}
 
-	if ((miro->aci_product == 'B') || (miro->aci_product == 'C')) {
+	if ((miro->aci->aci_product == 'B') ||
+	    (miro->aci->aci_product == 'C')) {
 		/* PCM12/PCM20 with mic-preamp */
 		if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_preamp_control[0], miro))) < 0)
 			return err;
-		if (miro->aci_version >= 176)
+		if (miro->aci->aci_version >= 176)
 			if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_capture_control[0], miro))) < 0)
 				return err;
 	}
 
-	if (miro->aci_product == 'C') {
+	if (miro->aci->aci_product == 'C') {
 		/* PCM20 with radio and 7 band equalizer */
 		if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_miro_radio_control[0], miro))) < 0)
 			return err;
@@ -757,21 +801,26 @@
 	chip->irq = -1;
 	chip->dma1 = -1;
 	chip->dma2 = -1;
-	chip->fm_port = -1;
 	chip->mpu_port = -1;
 	chip->mpu_irq = -1;
 
+	chip->pwd_reg = 3;
+
+#ifdef CONFIG_PNP
+	if (isapnp && chip->mc_base)
+		/* PnP resource gives the least 10 bits */
+		chip->mc_base |= 0xc00;
+	else
+#endif
+		chip->mc_base = 0xf8c;
+
 	switch (hardware) {
 	case OPTi9XX_HW_82C929:
-		chip->mc_base = 0xf8c;
 		chip->password = 0xe3;
-		chip->pwd_reg = 3;
 		break;
 
 	case OPTi9XX_HW_82C924:
-		chip->mc_base = 0xf8c;
 		chip->password = 0xe5;
-		chip->pwd_reg = 3;
 		break;
 
 	default:
@@ -853,14 +902,15 @@
 			       struct snd_info_buffer *buffer)
 {
 	struct snd_miro *miro = (struct snd_miro *) entry->private_data;
+	struct snd_miro_aci *aci = miro->aci;
 	char* model = "unknown";
 
 	/* miroSOUND PCM1 pro, early PCM12 */
 
 	if ((miro->hardware == OPTi9XX_HW_82C929) &&
-	    (miro->aci_vendor == 'm') && 
-	    (miro->aci_product == 'A')) {
-		switch(miro->aci_version) {
+	    (aci->aci_vendor == 'm') &&
+	    (aci->aci_product == 'A')) {
+		switch (aci->aci_version) {
 		case 3:
 			model = "miroSOUND PCM1 pro";
 			break;
@@ -873,9 +923,9 @@
 	/* miroSOUND PCM12, PCM12 (Rev. E), PCM12 pnp */
 
 	if ((miro->hardware == OPTi9XX_HW_82C924) &&
-	    (miro->aci_vendor == 'm') && 
-	    (miro->aci_product == 'B')) {
-		switch(miro->aci_version) {
+	    (aci->aci_vendor == 'm') &&
+	    (aci->aci_product == 'B')) {
+		switch (aci->aci_version) {
 		case 4:
 			model = "miroSOUND PCM12";
 			break;
@@ -891,9 +941,9 @@
 	/* miroSOUND PCM20 radio */
 
 	if ((miro->hardware == OPTi9XX_HW_82C924) &&
-	    (miro->aci_vendor == 'm') && 
-	    (miro->aci_product == 'C')) {
-		switch(miro->aci_version) {
+	    (aci->aci_vendor == 'm') &&
+	    (aci->aci_product == 'C')) {
+		switch (aci->aci_version) {
 		case 7:
 			model = "miroSOUND PCM20 radio (Rev. E)";
 			break;
@@ -917,17 +967,17 @@
 
 	snd_iprintf(buffer, "ACI information:\n");
 	snd_iprintf(buffer, "  vendor  : ");
-	switch(miro->aci_vendor) {
+	switch (aci->aci_vendor) {
 	case 'm':
 		snd_iprintf(buffer, "Miro\n");
 		break;
 	default:
-		snd_iprintf(buffer, "unknown (0x%x)\n", miro->aci_vendor);
+		snd_iprintf(buffer, "unknown (0x%x)\n", aci->aci_vendor);
 		break;
 	}
 
 	snd_iprintf(buffer, "  product : ");
-	switch(miro->aci_product) {
+	switch (aci->aci_product) {
 	case 'A':
 		snd_iprintf(buffer, "miroSOUND PCM1 pro / (early) PCM12\n");
 		break;
@@ -938,26 +988,27 @@
 		snd_iprintf(buffer, "miroSOUND PCM20 radio\n");
 		break;
 	default:
-		snd_iprintf(buffer, "unknown (0x%x)\n", miro->aci_product);
+		snd_iprintf(buffer, "unknown (0x%x)\n", aci->aci_product);
 		break;
 	}
 
 	snd_iprintf(buffer, "  firmware: %d (0x%x)\n",
-		    miro->aci_version, miro->aci_version);
+		    aci->aci_version, aci->aci_version);
 	snd_iprintf(buffer, "  port    : 0x%lx-0x%lx\n", 
-		    miro->aci_port, miro->aci_port+2);
+		    aci->aci_port, aci->aci_port+2);
 	snd_iprintf(buffer, "  wss     : 0x%x\n", wss);
 	snd_iprintf(buffer, "  ide     : 0x%x\n", ide);
-	snd_iprintf(buffer, "  solomode: 0x%x\n", miro->aci_solomode);
-	snd_iprintf(buffer, "  amp     : 0x%x\n", miro->aci_amp);
-	snd_iprintf(buffer, "  preamp  : 0x%x\n", miro->aci_preamp);
+	snd_iprintf(buffer, "  solomode: 0x%x\n", aci->aci_solomode);
+	snd_iprintf(buffer, "  amp     : 0x%x\n", aci->aci_amp);
+	snd_iprintf(buffer, "  preamp  : 0x%x\n", aci->aci_preamp);
 }
 
-static void __devinit snd_miro_proc_init(struct snd_miro * miro)
+static void __devinit snd_miro_proc_init(struct snd_card *card,
+					 struct snd_miro *miro)
 {
 	struct snd_info_entry *entry;
 
-	if (! snd_card_proc_new(miro->card, "miro", &entry))
+	if (!snd_card_proc_new(card, "miro", &entry))
 		snd_info_set_text_ops(entry, miro, snd_miro_proc_read);
 }
 
@@ -974,37 +1025,40 @@
 	unsigned char mpu_irq_bits;
 	unsigned long flags;
 
+	snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
+	snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */
+	snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
+
 	switch (chip->hardware) {
 	case OPTi9XX_HW_82C924:
 		snd_miro_write_mask(chip, OPTi9XX_MC_REG(6), 0x02, 0x02);
-		snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
-		snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */
 		snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
-		snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
 		break;
 	case OPTi9XX_HW_82C929:
 		/* untested init commands for OPTi929 */
-		snd_miro_write_mask(chip, OPTi9XX_MC_REG(1), 0x80, 0x80);
-		snd_miro_write_mask(chip, OPTi9XX_MC_REG(2), 0x20, 0x20); /* OPL4 */
 		snd_miro_write_mask(chip, OPTi9XX_MC_REG(4), 0x00, 0x0c);
-		snd_miro_write_mask(chip, OPTi9XX_MC_REG(5), 0x02, 0x02);
 		break;
 	default:
 		snd_printk(KERN_ERR "chip %d not supported\n", chip->hardware);
 		return -EINVAL;
 	}
 
-	switch (chip->wss_base) {
-	case 0x530:
+	/* PnP resource says it decodes only 10 bits of address */
+	switch (chip->wss_base & 0x3ff) {
+	case 0x130:
+		chip->wss_base = 0x530;
 		wss_base_bits = 0x00;
 		break;
-	case 0x604:
+	case 0x204:
+		chip->wss_base = 0x604;
 		wss_base_bits = 0x03;
 		break;
-	case 0xe80:
+	case 0x280:
+		chip->wss_base = 0xe80;
 		wss_base_bits = 0x01;
 		break;
-	case 0xf40:
+	case 0x340:
+		chip->wss_base = 0xf40;
 		wss_base_bits = 0x02;
 		break;
 	default:
@@ -1122,75 +1176,92 @@
 	return 0;
 }
 
+static int __devinit snd_miro_opti_check(struct snd_miro *chip)
+{
+	unsigned char value;
+
+	chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size,
+					   "OPTi9xx MC");
+	if (chip->res_mc_base == NULL)
+		return -ENOMEM;
+
+	value = snd_miro_read(chip, OPTi9XX_MC_REG(1));
+	if (value != 0xff && value != inb(chip->mc_base + OPTi9XX_MC_REG(1)))
+		if (value == snd_miro_read(chip, OPTi9XX_MC_REG(1)))
+			return 0;
+
+	release_and_free_resource(chip->res_mc_base);
+	chip->res_mc_base = NULL;
+
+	return -ENODEV;
+}
+
 static int __devinit snd_card_miro_detect(struct snd_card *card,
 					  struct snd_miro *chip)
 {
 	int i, err;
-	unsigned char value;
 
 	for (i = OPTi9XX_HW_82C929; i <= OPTi9XX_HW_82C924; i++) {
 
 		if ((err = snd_miro_init(chip, i)) < 0)
 			return err;
 
-		if ((chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size, "OPTi9xx MC")) == NULL)
-			continue;
-
-		value = snd_miro_read(chip, OPTi9XX_MC_REG(1));
-		if ((value != 0xff) && (value != inb(chip->mc_base + 1)))
-			if (value == snd_miro_read(chip, OPTi9XX_MC_REG(1)))
-				return 1;
-
-		release_and_free_resource(chip->res_mc_base);
-		chip->res_mc_base = NULL;
-
+		err = snd_miro_opti_check(chip);
+		if (err == 0)
+			return 1;
 	}
 
 	return -ENODEV;
 }
 
 static int __devinit snd_card_miro_aci_detect(struct snd_card *card,
-					      struct snd_miro * miro)
+					      struct snd_miro *miro)
 {
 	unsigned char regval;
 	int i;
+	struct snd_miro_aci *aci = &aci_device;
 
-	mutex_init(&miro->aci_mutex);
+	miro->aci = aci;
+
+	mutex_init(&aci->aci_mutex);
 
 	/* get ACI port from OPTi9xx MC 4 */
 
-	miro->mc_base = 0xf8c;
 	regval=inb(miro->mc_base + 4);
-	miro->aci_port = (regval & 0x10) ? 0x344: 0x354;
+	aci->aci_port = (regval & 0x10) ? 0x344 : 0x354;
 
-	if ((miro->res_aci_port = request_region(miro->aci_port, 3, "miro aci")) == NULL) {
+	miro->res_aci_port = request_region(aci->aci_port, 3, "miro aci");
+	if (miro->res_aci_port == NULL) {
 		snd_printk(KERN_ERR "aci i/o area 0x%lx-0x%lx already used.\n", 
-			   miro->aci_port, miro->aci_port+2);
+			   aci->aci_port, aci->aci_port+2);
 		return -ENOMEM;
 	}
 
         /* force ACI into a known state */
 	for (i = 0; i < 3; i++)
-		if (aci_cmd(miro, ACI_ERROR_OP, -1, -1) < 0) {
+		if (snd_aci_cmd(aci, ACI_ERROR_OP, -1, -1) < 0) {
 			snd_printk(KERN_ERR "can't force aci into known state.\n");
 			return -ENXIO;
 		}
 
-	if ((miro->aci_vendor=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0 ||
-	    (miro->aci_product=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0) {
-		snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n", miro->aci_port);
+	aci->aci_vendor = snd_aci_cmd(aci, ACI_READ_IDCODE, -1, -1);
+	aci->aci_product = snd_aci_cmd(aci, ACI_READ_IDCODE, -1, -1);
+	if (aci->aci_vendor < 0 || aci->aci_product < 0) {
+		snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n",
+			   aci->aci_port);
 		return -ENXIO;
 	}
 
-	if ((miro->aci_version=aci_cmd(miro, ACI_READ_VERSION, -1, -1)) < 0) {
+	aci->aci_version = snd_aci_cmd(aci, ACI_READ_VERSION, -1, -1);
+	if (aci->aci_version < 0) {
 		snd_printk(KERN_ERR "can't read aci version on 0x%lx.\n", 
-			   miro->aci_port);
+			   aci->aci_port);
 		return -ENXIO;
 	}
 
-	if (aci_cmd(miro, ACI_INIT, -1, -1) < 0 ||
-	    aci_cmd(miro, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0 ||
-	    aci_cmd(miro, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0) {
+	if (snd_aci_cmd(aci, ACI_INIT, -1, -1) < 0 ||
+	    snd_aci_cmd(aci, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0 ||
+	    snd_aci_cmd(aci, ACI_ERROR_OP, ACI_ERROR_OP, ACI_ERROR_OP) < 0) {
 		snd_printk(KERN_ERR "can't initialize aci.\n"); 
 		return -ENXIO;
 	}
@@ -1201,157 +1272,80 @@
 static void snd_card_miro_free(struct snd_card *card)
 {
 	struct snd_miro *miro = card->private_data;
-        
+
 	release_and_free_resource(miro->res_aci_port);
+	if (miro->aci)
+		miro->aci->aci_port = 0;
 	release_and_free_resource(miro->res_mc_base);
 }
 
-static int __devinit snd_miro_match(struct device *devptr, unsigned int n)
+static int __devinit snd_miro_probe(struct snd_card *card)
 {
-	return 1;
-}
-
-static int __devinit snd_miro_probe(struct device *devptr, unsigned int n)
-{
-	static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
-	static long possible_mpu_ports[] = {0x330, 0x300, 0x310, 0x320, -1};
-	static int possible_irqs[] = {11, 9, 10, 7, -1};
-	static int possible_mpu_irqs[] = {10, 5, 9, 7, -1};
-	static int possible_dma1s[] = {3, 1, 0, -1};
-	static int possible_dma2s[][2] = {{1,-1}, {0,-1}, {-1,-1}, {0,-1}};
-
 	int error;
-	struct snd_miro *miro;
+	struct snd_miro *miro = card->private_data;
 	struct snd_wss *codec;
 	struct snd_timer *timer;
-	struct snd_card *card;
 	struct snd_pcm *pcm;
 	struct snd_rawmidi *rmidi;
 
-	error = snd_card_create(index, id, THIS_MODULE,
-				sizeof(struct snd_miro), &card);
-	if (error < 0)
-		return error;
+	if (!miro->res_mc_base) {
+		miro->res_mc_base = request_region(miro->mc_base,
+						miro->mc_base_size,
+						"miro (OPTi9xx MC)");
+		if (miro->res_mc_base == NULL) {
+			snd_printk(KERN_ERR "request for OPTI9xx MC failed\n");
+			return -ENOMEM;
+		}
+	}
 
-	card->private_free = snd_card_miro_free;
-	miro = card->private_data;
-	miro->card = card;
-
-	if ((error = snd_card_miro_aci_detect(card, miro)) < 0) {
+	error = snd_card_miro_aci_detect(card, miro);
+	if (error < 0) {
 		snd_card_free(card);
 		snd_printk(KERN_ERR "unable to detect aci chip\n");
 		return -ENODEV;
 	}
 
-	/* init proc interface */
-	snd_miro_proc_init(miro);
-
-	if ((error = snd_card_miro_detect(card, miro)) < 0) {
-		snd_card_free(card);
-		snd_printk(KERN_ERR "unable to detect OPTi9xx chip\n");
-		return -ENODEV;
-	}
-
-	if (! miro->res_mc_base &&
-	    (miro->res_mc_base = request_region(miro->mc_base, miro->mc_base_size,
-						"miro (OPTi9xx MC)")) == NULL) {
-		snd_card_free(card);
-		snd_printk(KERN_ERR "request for OPTI9xx MC failed\n");
-		return -ENOMEM;
-	}
-
 	miro->wss_base = port;
-	miro->fm_port = fm_port;
 	miro->mpu_port = mpu_port;
 	miro->irq = irq;
 	miro->mpu_irq = mpu_irq;
 	miro->dma1 = dma1;
 	miro->dma2 = dma2;
 
-	if (miro->wss_base == SNDRV_AUTO_PORT) {
-		if ((miro->wss_base = snd_legacy_find_free_ioport(possible_ports, 4)) < 0) {
-			snd_card_free(card);
-			snd_printk(KERN_ERR "unable to find a free WSS port\n");
-			return -EBUSY;
-		}
-	}
-
-	if (miro->mpu_port == SNDRV_AUTO_PORT) {
-		if ((miro->mpu_port = snd_legacy_find_free_ioport(possible_mpu_ports, 2)) < 0) {
-			snd_card_free(card);
-			snd_printk(KERN_ERR "unable to find a free MPU401 port\n");
-			return -EBUSY;
-		}
-	}
-	if (miro->irq == SNDRV_AUTO_IRQ) {
-		if ((miro->irq = snd_legacy_find_free_irq(possible_irqs)) < 0) {
-			snd_card_free(card);
-			snd_printk(KERN_ERR "unable to find a free IRQ\n");
-			return -EBUSY;
-		}
-	}
-	if (miro->mpu_irq == SNDRV_AUTO_IRQ) {
-		if ((miro->mpu_irq = snd_legacy_find_free_irq(possible_mpu_irqs)) < 0) {
-			snd_card_free(card);
-			snd_printk(KERN_ERR "unable to find a free MPU401 IRQ\n");
-			return -EBUSY;
-		}
-	}
-	if (miro->dma1 == SNDRV_AUTO_DMA) {
-		if ((miro->dma1 = snd_legacy_find_free_dma(possible_dma1s)) < 0) {
-			snd_card_free(card);
-			snd_printk(KERN_ERR "unable to find a free DMA1\n");
-			return -EBUSY;
-		}
-	}
-	if (miro->dma2 == SNDRV_AUTO_DMA) {
-		if ((miro->dma2 = snd_legacy_find_free_dma(possible_dma2s[miro->dma1 % 4])) < 0) {
-			snd_card_free(card);
-			snd_printk(KERN_ERR "unable to find a free DMA2\n");
-			return -EBUSY;
-		}
-	}
+	/* init proc interface */
+	snd_miro_proc_init(card, miro);
 
 	error = snd_miro_configure(miro);
-	if (error) {
-		snd_card_free(card);
+	if (error)
 		return error;
-	}
 
 	error = snd_wss_create(card, miro->wss_base + 4, -1,
-				miro->irq, miro->dma1, miro->dma2,
-				WSS_HW_AD1845, 0, &codec);
-	if (error < 0) {
-		snd_card_free(card);
+			       miro->irq, miro->dma1, miro->dma2,
+			       WSS_HW_DETECT, 0, &codec);
+	if (error < 0)
 		return error;
-	}
 
 	error = snd_wss_pcm(codec, 0, &pcm);
-	if (error < 0)  {
-		snd_card_free(card);
+	if (error < 0)
 		return error;
-	}
+
 	error = snd_wss_mixer(codec);
-	if (error < 0) {
-		snd_card_free(card);
+	if (error < 0)
 		return error;
-	}
+
 	error = snd_wss_timer(codec, 0, &timer);
-	if (error < 0) {
-		snd_card_free(card);
+	if (error < 0)
 		return error;
-	}
 
 	miro->pcm = pcm;
 
-	if ((error = snd_miro_mixer(miro)) < 0) {
-		snd_card_free(card);
+	error = snd_miro_mixer(card, miro);
+	if (error < 0)
 		return error;
-	}
 
-	if (miro->aci_vendor == 'm') {
+	if (miro->aci->aci_vendor == 'm') {
 		/* It looks like a miro sound card. */
-		switch (miro->aci_product) {
+		switch (miro->aci->aci_product) {
 		case 'A':
 			sprintf(card->shortname, 
 				"miroSOUND PCM1 pro / PCM12");
@@ -1380,30 +1374,131 @@
 		card->shortname, miro->name, pcm->name, miro->wss_base + 4,
 		miro->irq, miro->dma1, miro->dma2);
 
-	if (miro->mpu_port <= 0 || miro->mpu_port == SNDRV_AUTO_PORT)
+	if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
 		rmidi = NULL;
-	else
-		if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-				miro->mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
-				&rmidi)))
-			snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n", miro->mpu_port);
-
-	if (miro->fm_port > 0 && miro->fm_port != SNDRV_AUTO_PORT) {
-		struct snd_opl3 *opl3 = NULL;
-		struct snd_opl4 *opl4;
-		if (snd_opl4_create(card, miro->fm_port, miro->fm_port - 8, 
-				    2, &opl3, &opl4) < 0)
-			snd_printk(KERN_WARNING "no OPL4 device at 0x%lx\n", miro->fm_port);
+	else {
+		error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
+				mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
+				&rmidi);
+		if (error < 0)
+			snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
+				   mpu_port);
 	}
 
-	if ((error = snd_set_aci_init_values(miro)) < 0) {
-		snd_card_free(card);
+	if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) {
+		struct snd_opl3 *opl3 = NULL;
+		struct snd_opl4 *opl4;
+
+		if (snd_opl4_create(card, fm_port, fm_port - 8,
+				    2, &opl3, &opl4) < 0)
+			snd_printk(KERN_WARNING "no OPL4 device at 0x%lx\n",
+				   fm_port);
+	}
+
+	error = snd_set_aci_init_values(miro);
+	if (error < 0)
                 return error;
+
+	return snd_card_register(card);
+}
+
+static int __devinit snd_miro_isa_match(struct device *devptr, unsigned int n)
+{
+#ifdef CONFIG_PNP
+	if (snd_miro_pnp_is_probed)
+		return 0;
+	if (isapnp)
+		return 0;
+#endif
+	return 1;
+}
+
+static int __devinit snd_miro_isa_probe(struct device *devptr, unsigned int n)
+{
+	static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
+	static long possible_mpu_ports[] = {0x330, 0x300, 0x310, 0x320, -1};
+	static int possible_irqs[] = {11, 9, 10, 7, -1};
+	static int possible_mpu_irqs[] = {10, 5, 9, 7, -1};
+	static int possible_dma1s[] = {3, 1, 0, -1};
+	static int possible_dma2s[][2] = { {1, -1}, {0, -1}, {-1, -1},
+					   {0, -1} };
+
+	int error;
+	struct snd_miro *miro;
+	struct snd_card *card;
+
+	error = snd_card_create(index, id, THIS_MODULE,
+				sizeof(struct snd_miro), &card);
+	if (error < 0)
+		return error;
+
+	card->private_free = snd_card_miro_free;
+	miro = card->private_data;
+
+	error = snd_card_miro_detect(card, miro);
+	if (error < 0) {
+		snd_card_free(card);
+		snd_printk(KERN_ERR "unable to detect OPTi9xx chip\n");
+		return -ENODEV;
+	}
+
+	if (port == SNDRV_AUTO_PORT) {
+		port = snd_legacy_find_free_ioport(possible_ports, 4);
+		if (port < 0) {
+			snd_card_free(card);
+			snd_printk(KERN_ERR "unable to find a free WSS port\n");
+			return -EBUSY;
+		}
+	}
+
+	if (mpu_port == SNDRV_AUTO_PORT) {
+		mpu_port = snd_legacy_find_free_ioport(possible_mpu_ports, 2);
+		if (mpu_port < 0) {
+			snd_card_free(card);
+			snd_printk(KERN_ERR
+				   "unable to find a free MPU401 port\n");
+			return -EBUSY;
+		}
+	}
+
+	if (irq == SNDRV_AUTO_IRQ) {
+		irq = snd_legacy_find_free_irq(possible_irqs);
+		if (irq < 0) {
+			snd_card_free(card);
+			snd_printk(KERN_ERR "unable to find a free IRQ\n");
+			return -EBUSY;
+		}
+	}
+	if (mpu_irq == SNDRV_AUTO_IRQ) {
+		mpu_irq = snd_legacy_find_free_irq(possible_mpu_irqs);
+		if (mpu_irq < 0) {
+			snd_card_free(card);
+			snd_printk(KERN_ERR
+				   "unable to find a free MPU401 IRQ\n");
+			return -EBUSY;
+		}
+	}
+	if (dma1 == SNDRV_AUTO_DMA) {
+		dma1 = snd_legacy_find_free_dma(possible_dma1s);
+		if (dma1 < 0) {
+			snd_card_free(card);
+			snd_printk(KERN_ERR "unable to find a free DMA1\n");
+			return -EBUSY;
+		}
+	}
+	if (dma2 == SNDRV_AUTO_DMA) {
+		dma2 = snd_legacy_find_free_dma(possible_dma2s[dma1 % 4]);
+		if (dma2 < 0) {
+			snd_card_free(card);
+			snd_printk(KERN_ERR "unable to find a free DMA2\n");
+			return -EBUSY;
+		}
 	}
 
 	snd_card_set_dev(card, devptr);
 
-	if ((error = snd_card_register(card))) {
+	error = snd_miro_probe(card);
+	if (error < 0) {
 		snd_card_free(card);
 		return error;
 	}
@@ -1412,7 +1507,8 @@
 	return 0;
 }
 
-static int __devexit snd_miro_remove(struct device *devptr, unsigned int dev)
+static int __devexit snd_miro_isa_remove(struct device *devptr,
+					 unsigned int dev)
 {
 	snd_card_free(dev_get_drvdata(devptr));
 	dev_set_drvdata(devptr, NULL);
@@ -1422,23 +1518,164 @@
 #define DEV_NAME "miro"
 
 static struct isa_driver snd_miro_driver = {
-	.match		= snd_miro_match,
-	.probe		= snd_miro_probe,
-	.remove		= __devexit_p(snd_miro_remove),
+	.match		= snd_miro_isa_match,
+	.probe		= snd_miro_isa_probe,
+	.remove		= __devexit_p(snd_miro_isa_remove),
 	/* FIXME: suspend/resume */
 	.driver		= {
 		.name	= DEV_NAME
 	},
 };
 
+#ifdef CONFIG_PNP
+
+static int __devinit snd_card_miro_pnp(struct snd_miro *chip,
+					struct pnp_card_link *card,
+					const struct pnp_card_device_id *pid)
+{
+	struct pnp_dev *pdev;
+	int err;
+	struct pnp_dev *devmpu;
+	struct pnp_dev *devmc;
+
+	pdev = pnp_request_card_device(card, pid->devs[0].id, NULL);
+	if (pdev == NULL)
+		return -EBUSY;
+
+	devmpu = pnp_request_card_device(card, pid->devs[1].id, NULL);
+	if (devmpu == NULL)
+		return -EBUSY;
+
+	devmc = pnp_request_card_device(card, pid->devs[2].id, NULL);
+	if (devmc == NULL)
+		return -EBUSY;
+
+	err = pnp_activate_dev(pdev);
+	if (err < 0) {
+		snd_printk(KERN_ERR "AUDIO pnp configure failure: %d\n", err);
+		return err;
+	}
+
+	err = pnp_activate_dev(devmc);
+	if (err < 0) {
+		snd_printk(KERN_ERR "OPL syntg pnp configure failure: %d\n",
+				    err);
+		return err;
+	}
+
+	port = pnp_port_start(pdev, 1);
+	fm_port = pnp_port_start(pdev, 2) + 8;
+
+	/*
+	 * The MC(0) is never accessed and the miroSOUND PCM20 card does not
+	 * include it in the PnP resource range. OPTI93x include it.
+	 */
+	chip->mc_base = pnp_port_start(devmc, 0) - 1;
+	chip->mc_base_size = pnp_port_len(devmc, 0) + 1;
+
+	irq = pnp_irq(pdev, 0);
+	dma1 = pnp_dma(pdev, 0);
+	dma2 = pnp_dma(pdev, 1);
+
+	if (mpu_port > 0) {
+		err = pnp_activate_dev(devmpu);
+		if (err < 0) {
+			snd_printk(KERN_ERR "MPU401 pnp configure failure\n");
+			mpu_port = -1;
+			return err;
+		}
+		mpu_port = pnp_port_start(devmpu, 0);
+		mpu_irq = pnp_irq(devmpu, 0);
+	}
+	return 0;
+}
+
+static int __devinit snd_miro_pnp_probe(struct pnp_card_link *pcard,
+					const struct pnp_card_device_id *pid)
+{
+	struct snd_card *card;
+	int err;
+	struct snd_miro *miro;
+
+	if (snd_miro_pnp_is_probed)
+		return -EBUSY;
+	if (!isapnp)
+		return -ENODEV;
+	err = snd_card_create(index, id, THIS_MODULE,
+				sizeof(struct snd_miro), &card);
+	if (err < 0)
+		return err;
+
+	card->private_free = snd_card_miro_free;
+	miro = card->private_data;
+
+	err = snd_card_miro_pnp(miro, pcard, pid);
+	if (err) {
+		snd_card_free(card);
+		return err;
+	}
+
+	/* only miroSOUND PCM20 and PCM12 == OPTi924 */
+	err = snd_miro_init(miro, OPTi9XX_HW_82C924);
+	if (err) {
+		snd_card_free(card);
+		return err;
+	}
+
+	err = snd_miro_opti_check(miro);
+	if (err) {
+		snd_printk(KERN_ERR "OPTI chip not found\n");
+		snd_card_free(card);
+		return err;
+	}
+
+	snd_card_set_dev(card, &pcard->card->dev);
+	err = snd_miro_probe(card);
+	if (err < 0) {
+		snd_card_free(card);
+		return err;
+	}
+	pnp_set_card_drvdata(pcard, card);
+	snd_miro_pnp_is_probed = 1;
+	return 0;
+}
+
+static void __devexit snd_miro_pnp_remove(struct pnp_card_link * pcard)
+{
+	snd_card_free(pnp_get_card_drvdata(pcard));
+	pnp_set_card_drvdata(pcard, NULL);
+	snd_miro_pnp_is_probed = 0;
+}
+
+static struct pnp_card_driver miro_pnpc_driver = {
+	.flags		= PNP_DRIVER_RES_DISABLE,
+	.name		= "miro",
+	.id_table	= snd_miro_pnpids,
+	.probe		= snd_miro_pnp_probe,
+	.remove		= __devexit_p(snd_miro_pnp_remove),
+};
+#endif
+
 static int __init alsa_card_miro_init(void)
 {
+#ifdef CONFIG_PNP
+	pnp_register_card_driver(&miro_pnpc_driver);
+	if (snd_miro_pnp_is_probed)
+		return 0;
+	pnp_unregister_card_driver(&miro_pnpc_driver);
+#endif
 	return isa_register_driver(&snd_miro_driver, 1);
 }
 
 static void __exit alsa_card_miro_exit(void)
 {
-	isa_unregister_driver(&snd_miro_driver);
+	if (!snd_miro_pnp_is_probed) {
+		isa_unregister_driver(&snd_miro_driver);
+		return;
+	}
+#ifdef CONFIG_PNP
+	pnp_unregister_card_driver(&miro_pnpc_driver);
+#endif
 }
 
 module_init(alsa_card_miro_init)
diff --git a/sound/isa/opti9xx/miro.h b/sound/isa/opti9xx/miro.h
deleted file mode 100644
index 6e1385b..0000000
--- a/sound/isa/opti9xx/miro.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef _MIRO_H_
-#define _MIRO_H_
-
-#define ACI_REG_COMMAND		0	/* write register offset */
-#define ACI_REG_STATUS		1	/* read register offset */
-#define ACI_REG_BUSY		2	/* busy register offset */
-#define ACI_REG_RDS		2	/* PCM20: RDS register offset */
-#define ACI_MINTIME		500	/* ACI time out limit */
-
-#define ACI_SET_MUTE		0x0d
-#define ACI_SET_POWERAMP	0x0f
-#define ACI_SET_TUNERMUTE	0xa3
-#define ACI_SET_TUNERMONO	0xa4
-#define ACI_SET_IDE		0xd0
-#define ACI_SET_WSS		0xd1
-#define ACI_SET_SOLOMODE	0xd2
-#define ACI_SET_PREAMP		0x03
-#define ACI_GET_PREAMP		0x21
-#define ACI_WRITE_TUNE		0xa7
-#define ACI_READ_TUNERSTEREO	0xa8
-#define ACI_READ_TUNERSTATION	0xa9
-#define ACI_READ_VERSION	0xf1
-#define ACI_READ_IDCODE		0xf2
-#define ACI_INIT		0xff
-#define ACI_STATUS		0xf0
-#define ACI_S_GENERAL		0x00
-#define ACI_ERROR_OP		0xdf
-
-/* ACI Mixer */
-
-/* These are the values for the right channel GET registers.
-   Add an offset of 0x01 for the left channel register.
-   (left=right+0x01) */
-
-#define ACI_GET_MASTER		0x03
-#define ACI_GET_MIC		0x05
-#define ACI_GET_LINE		0x07
-#define ACI_GET_CD		0x09
-#define ACI_GET_SYNTH		0x0b
-#define ACI_GET_PCM		0x0d
-#define ACI_GET_LINE1		0x10	/* Radio on PCM20 */
-#define ACI_GET_LINE2		0x12
-
-#define ACI_GET_EQ1		0x22	/* from Bass ... */
-#define ACI_GET_EQ2		0x24
-#define ACI_GET_EQ3		0x26
-#define ACI_GET_EQ4		0x28
-#define ACI_GET_EQ5		0x2a
-#define ACI_GET_EQ6		0x2c
-#define ACI_GET_EQ7		0x2e	/* ... to Treble */
-
-/* And these are the values for the right channel SET registers.
-   For left channel access you have to add an offset of 0x08.
-   MASTER is an exception, which needs an offset of 0x01 */
-
-#define ACI_SET_MASTER		0x00
-#define ACI_SET_MIC		0x30
-#define ACI_SET_LINE		0x31
-#define ACI_SET_CD		0x34
-#define ACI_SET_SYNTH		0x33
-#define ACI_SET_PCM		0x32
-#define ACI_SET_LINE1		0x35	/* Radio on PCM20 */
-#define ACI_SET_LINE2		0x36
-
-#define ACI_SET_EQ1		0x40	/* from Bass ... */
-#define ACI_SET_EQ2		0x41
-#define ACI_SET_EQ3		0x42
-#define ACI_SET_EQ4		0x43
-#define ACI_SET_EQ5		0x44
-#define ACI_SET_EQ6		0x45
-#define ACI_SET_EQ7		0x46	/* ... to Treble */
-
-#endif  /* _MIRO_H_ */
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index 5cd5553..d08c389 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -141,15 +141,7 @@
 
 	spinlock_t lock;
 
-	long wss_base;
 	int irq;
-	int dma1;
-	int dma2;
-
-	long fm_port;
-
-	long mpu_port;
-	int mpu_irq;
 
 #ifdef CONFIG_PNP
 	struct pnp_dev *dev;
@@ -216,13 +208,7 @@
 
 	spin_lock_init(&chip->lock);
 
-	chip->wss_base = -1;
 	chip->irq = -1;
-	chip->dma1 = -1;
-	chip->dma2 = -1;
-	chip->fm_port = -1;
-	chip->mpu_port = -1;
-	chip->mpu_irq = -1;
 
 	switch (hardware) {
 #ifndef OPTi93X
@@ -348,7 +334,10 @@
 		(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
 
 
-static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip)
+static int __devinit snd_opti9xx_configure(struct snd_opti9xx *chip,
+					   long wss_base,
+					   int irq, int dma1, int dma2,
+					   long mpu_port, int mpu_irq)
 {
 	unsigned char wss_base_bits;
 	unsigned char irq_bits;
@@ -416,7 +405,7 @@
 		return -EINVAL;
 	}
 
-	switch (chip->wss_base) {
+	switch (wss_base) {
 	case 0x530:
 		wss_base_bits = 0x00;
 		break;
@@ -430,14 +419,13 @@
 		wss_base_bits = 0x02;
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n",
-			   chip->wss_base);
+		snd_printk(KERN_WARNING "WSS port 0x%lx not valid\n", wss_base);
 		goto __skip_base;
 	}
 	snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(1), wss_base_bits << 4, 0x30);
 
 __skip_base:
-	switch (chip->irq) {
+	switch (irq) {
 //#ifdef OPTi93X
 	case 5:
 		irq_bits = 0x05;
@@ -456,11 +444,11 @@
 		irq_bits = 0x04;
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS irq # %d not valid\n", chip->irq);
+		snd_printk(KERN_WARNING "WSS irq # %d not valid\n", irq);
 		goto __skip_resources;
 	}
 
-	switch (chip->dma1) {
+	switch (dma1) {
 	case 0:
 		dma_bits = 0x01;
 		break;
@@ -471,38 +459,36 @@
 		dma_bits = 0x03;
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n",
-			   chip->dma1);
+		snd_printk(KERN_WARNING "WSS dma1 # %d not valid\n", dma1);
 		goto __skip_resources;
 	}
 
 #if defined(CS4231) || defined(OPTi93X)
-	if (chip->dma1 == chip->dma2) {
+	if (dma1 == dma2) {
 		snd_printk(KERN_ERR "don't want to share dmas\n");
 		return -EBUSY;
 	}
 
-	switch (chip->dma2) {
+	switch (dma2) {
 	case 0:
 	case 1:
 		break;
 	default:
-		snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n",
-			   chip->dma2);
+		snd_printk(KERN_WARNING "WSS dma2 # %d not valid\n", dma2);
 		goto __skip_resources;
 	}
 	dma_bits |= 0x04;
 #endif	/* CS4231 || OPTi93X */
 
 #ifndef OPTi93X
-	 outb(irq_bits << 3 | dma_bits, chip->wss_base);
+	 outb(irq_bits << 3 | dma_bits, wss_base);
 #else /* OPTi93X */
 	snd_opti9xx_write(chip, OPTi9XX_MC_REG(3), (irq_bits << 3 | dma_bits));
 #endif /* OPTi93X */
 
 __skip_resources:
 	if (chip->hardware > OPTi9XX_HW_82C928) {
-		switch (chip->mpu_port) {
+		switch (mpu_port) {
 		case 0:
 		case -1:
 			break;
@@ -520,12 +506,11 @@
 			break;
 		default:
 			snd_printk(KERN_WARNING
-				   "MPU-401 port 0x%lx not valid\n",
-				chip->mpu_port);
+				   "MPU-401 port 0x%lx not valid\n", mpu_port);
 			goto __skip_mpu;
 		}
 
-		switch (chip->mpu_irq) {
+		switch (mpu_irq) {
 		case 5:
 			mpu_irq_bits = 0x02;
 			break;
@@ -540,12 +525,12 @@
 			break;
 		default:
 			snd_printk(KERN_WARNING "MPU-401 irq # %d not valid\n",
-				chip->mpu_irq);
+				mpu_irq);
 			goto __skip_mpu;
 		}
 
 		snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(6),
-			(chip->mpu_port <= 0) ? 0x00 :
+			(mpu_port <= 0) ? 0x00 :
 				0x80 | mpu_port_bits << 5 | mpu_irq_bits << 3,
 			0xf8);
 	}
@@ -701,6 +686,7 @@
 {
 	static long possible_ports[] = {0x530, 0xe80, 0xf40, 0x604, -1};
 	int error;
+	int xdma2;
 	struct snd_opti9xx *chip = card->private_data;
 	struct snd_wss *codec;
 #ifdef CS4231
@@ -715,31 +701,25 @@
 						"OPTi9xx MC")) == NULL)
 		return -ENOMEM;
 
-	chip->wss_base = port;
-	chip->fm_port = fm_port;
-	chip->mpu_port = mpu_port;
-	chip->irq = irq;
-	chip->mpu_irq = mpu_irq;
-	chip->dma1 = dma1;
 #if defined(CS4231) || defined(OPTi93X)
-	chip->dma2 = dma2;
+	xdma2 = dma2;
 #else
-	chip->dma2 = -1;
+	xdma2 = -1;
 #endif
 
-	if (chip->wss_base == SNDRV_AUTO_PORT) {
-		chip->wss_base = snd_legacy_find_free_ioport(possible_ports, 4);
-		if (chip->wss_base < 0) {
+	if (port == SNDRV_AUTO_PORT) {
+		port = snd_legacy_find_free_ioport(possible_ports, 4);
+		if (port < 0) {
 			snd_printk(KERN_ERR "unable to find a free WSS port\n");
 			return -EBUSY;
 		}
 	}
-	error = snd_opti9xx_configure(chip);
+	error = snd_opti9xx_configure(chip, port, irq, dma1, xdma2,
+				      mpu_port, mpu_irq);
 	if (error)
 		return error;
 
-	error = snd_wss_create(card, chip->wss_base + 4, -1,
-			       chip->irq, chip->dma1, chip->dma2,
+	error = snd_wss_create(card, port + 4, -1, irq, dma1, xdma2,
 #ifdef OPTi93X
 			       WSS_HW_OPTI93X, WSS_HWSHARE_IRQ,
 #else
@@ -763,35 +743,35 @@
 		return error;
 #endif
 #ifdef OPTi93X
-	error = request_irq(chip->irq, snd_opti93x_interrupt,
+	error = request_irq(irq, snd_opti93x_interrupt,
 			    IRQF_DISABLED, DEV_NAME" - WSS", codec);
 	if (error < 0) {
 		snd_printk(KERN_ERR "opti9xx: can't grab IRQ %d\n", chip->irq);
 		return error;
 	}
 #endif
+	chip->irq = irq;
 	strcpy(card->driver, chip->name);
 	sprintf(card->shortname, "OPTi %s", card->driver);
 #if defined(CS4231) || defined(OPTi93X)
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d&%d",
-		card->shortname, pcm->name, chip->wss_base + 4,
-		chip->irq, chip->dma1, chip->dma2);
+		card->shortname, pcm->name, port + 4, irq, dma1, xdma2);
 #else
 	sprintf(card->longname, "%s, %s at 0x%lx, irq %d, dma %d",
-		card->shortname, pcm->name, chip->wss_base + 4,
-		chip->irq, chip->dma1);
+		card->shortname, pcm->name, port + 4, irq, dma1);
 #endif	/* CS4231 || OPTi93X */
 
-	if (chip->mpu_port <= 0 || chip->mpu_port == SNDRV_AUTO_PORT)
+	if (mpu_port <= 0 || mpu_port == SNDRV_AUTO_PORT)
 		rmidi = NULL;
-	else
-		if ((error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-				chip->mpu_port, 0, chip->mpu_irq, IRQF_DISABLED,
-				&rmidi)))
+	else {
+		error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
+				mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi);
+		if (error)
 			snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
-				   chip->mpu_port);
+				   mpu_port);
+	}
 
-	if (chip->fm_port > 0 && chip->fm_port != SNDRV_AUTO_PORT) {
+	if (fm_port > 0 && fm_port != SNDRV_AUTO_PORT) {
 		struct snd_opl3 *opl3 = NULL;
 #ifndef OPTi93X
 		if (chip->hardware == OPTi9XX_HW_82C928 ||
@@ -801,9 +781,7 @@
 			/* assume we have an OPL4 */
 			snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2),
 					       0x20, 0x20);
-			if (snd_opl4_create(card,
-					    chip->fm_port,
-					    chip->fm_port - 8,
+			if (snd_opl4_create(card, fm_port, fm_port - 8,
 					    2, &opl3, &opl4) < 0) {
 				/* no luck, use OPL3 instead */
 				snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(2),
@@ -811,12 +789,10 @@
 			}
 		}
 #endif	/* !OPTi93X */
-		if (!opl3 && snd_opl3_create(card,
-					     chip->fm_port,
-					     chip->fm_port + 2,
+		if (!opl3 && snd_opl3_create(card, fm_port, fm_port + 2,
 					     OPL3_HW_AUTO, 0, &opl3) < 0) {
 			snd_printk(KERN_WARNING "no OPL device at 0x%lx-0x%lx\n",
-				   chip->fm_port, chip->fm_port + 4 - 1);
+				   fm_port, fm_port + 4 - 1);
 		}
 		if (opl3) {
 			error = snd_opl3_hwdep_new(opl3, 0, 1, &synth);
diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c
index 475220b..318ff0c 100644
--- a/sound/isa/sb/sb_mixer.c
+++ b/sound/isa/sb/sb_mixer.c
@@ -631,7 +631,7 @@
 static struct sbmix_elem snd_sb16_ctl_mic_play_vol =
 	SB_SINGLE("Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31);
 static struct sbmix_elem snd_sb16_ctl_pc_speaker_vol =
-	SB_SINGLE("PC Speaker Volume", SB_DSP4_SPEAKER_DEV, 6, 3);
+	SB_SINGLE("Beep Volume", SB_DSP4_SPEAKER_DEV, 6, 3);
 static struct sbmix_elem snd_sb16_ctl_capture_vol =
 	SB_DOUBLE("Capture Volume", SB_DSP4_IGAIN_DEV, (SB_DSP4_IGAIN_DEV + 1), 6, 6, 3);
 static struct sbmix_elem snd_sb16_ctl_play_vol =
@@ -689,7 +689,7 @@
 static struct sbmix_elem snd_dt019x_ctl_mic_play_vol =
 	SB_SINGLE("Mic Playback Volume", SB_DT019X_MIC_DEV, 4, 7);
 static struct sbmix_elem snd_dt019x_ctl_pc_speaker_vol =
-	SB_SINGLE("PC Speaker Volume", SB_DT019X_SPKR_DEV, 0,  7);
+	SB_SINGLE("Beep Volume", SB_DT019X_SPKR_DEV, 0,  7);
 static struct sbmix_elem snd_dt019x_ctl_line_play_vol =
 	SB_DOUBLE("Line Playback Volume", SB_DT019X_LINE_DEV, SB_DT019X_LINE_DEV, 4,0, 15);
 static struct sbmix_elem snd_dt019x_ctl_pcm_play_switch =
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 6618712..e2d5d2d 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -1,5 +1,5 @@
 /*
- *   Low-level ALSA driver for the ENSONIQ SoundScape PnP
+ *   Low-level ALSA driver for the ENSONIQ SoundScape
  *   Copyright (c) by Chris Rankin
  *
  *   This driver was written in part using information obtained from
@@ -25,31 +25,36 @@
 #include <linux/err.h>
 #include <linux/isa.h>
 #include <linux/delay.h>
+#include <linux/firmware.h>
 #include <linux/pnp.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
 #include <asm/dma.h>
 #include <sound/core.h>
-#include <sound/hwdep.h>
 #include <sound/wss.h>
 #include <sound/mpu401.h>
 #include <sound/initval.h>
 
-#include <sound/sscape_ioctl.h>
-
 
 MODULE_AUTHOR("Chris Rankin");
-MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver");
+MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
 MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("sndscape.co0");
+MODULE_FIRMWARE("sndscape.co1");
+MODULE_FIRMWARE("sndscape.co2");
+MODULE_FIRMWARE("sndscape.co3");
+MODULE_FIRMWARE("sndscape.co4");
+MODULE_FIRMWARE("scope.cod");
 
-static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX;
-static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR;
-static long port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT;
-static long wss_port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT;
-static int irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ;
-static int mpu_irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ;
-static int dma[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA;
-static int dma2[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA;
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static bool joystick[SNDRV_CARDS];
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
@@ -75,6 +80,9 @@
 module_param_array(dma2, int, NULL, 0444);
 MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
 
+module_param_array(joystick, bool, NULL, 0444);
+MODULE_PARM_DESC(joystick, "Enable gameport.");
+
 #ifdef CONFIG_PNP
 static int isa_registered;
 static int pnp_registered;
@@ -101,14 +109,14 @@
 #define RX_READY 0x01
 #define TX_READY 0x02
 
-#define CMD_ACK           0x80
-#define CMD_SET_MIDI_VOL  0x84
-#define CMD_GET_MIDI_VOL  0x85
-#define CMD_XXX_MIDI_VOL  0x86
-#define CMD_SET_EXTMIDI   0x8a
-#define CMD_GET_EXTMIDI   0x8b
-#define CMD_SET_MT32      0x8c
-#define CMD_GET_MT32      0x8d
+#define CMD_ACK			0x80
+#define CMD_SET_MIDI_VOL	0x84
+#define CMD_GET_MIDI_VOL	0x85
+#define CMD_XXX_MIDI_VOL	0x86
+#define CMD_SET_EXTMIDI		0x8a
+#define CMD_GET_EXTMIDI		0x8b
+#define CMD_SET_MT32		0x8c
+#define CMD_GET_MT32		0x8d
 
 enum GA_REG {
 	GA_INTSTAT_REG = 0,
@@ -127,7 +135,8 @@
 
 
 enum card_type {
-	SSCAPE,
+	MEDIA_FX,	/* Sequoia S-1000 */
+	SSCAPE,		/* Sequoia S-2000 */
 	SSCAPE_PNP,
 	SSCAPE_VIVO,
 };
@@ -140,16 +149,7 @@
 	struct resource *io_res;
 	struct resource *wss_res;
 	struct snd_wss *chip;
-	struct snd_mpu401 *mpu;
-	struct snd_hwdep *hw;
 
-	/*
-	 * The MIDI device won't work until we've loaded
-	 * its firmware via a hardware-dependent device IOCTL
-	 */
-	spinlock_t fwlock;
-	int hw_in_use;
-	unsigned long midi_usage;
 	unsigned char midi_vol;
 };
 
@@ -161,28 +161,21 @@
 	return (struct soundscape *) (c->private_data);
 }
 
-static inline struct soundscape *get_mpu401_soundscape(struct snd_mpu401 * mpu)
-{
-	return (struct soundscape *) (mpu->private_data);
-}
-
-static inline struct soundscape *get_hwdep_soundscape(struct snd_hwdep * hw)
-{
-	return (struct soundscape *) (hw->private_data);
-}
-
-
 /*
  * Allocates some kernel memory that we can use for DMA.
  * I think this means that the memory has to map to
  * contiguous pages of physical memory.
  */
-static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size)
+static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf,
+					 unsigned long size)
 {
 	if (buf) {
-		if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(),
+		if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
+						 snd_dma_isa_data(),
 						 size, buf) < 0) {
-			snd_printk(KERN_ERR "sscape: Failed to allocate %lu bytes for DMA\n", size);
+			snd_printk(KERN_ERR "sscape: Failed to allocate "
+					    "%lu bytes for DMA\n",
+					    size);
 			return NULL;
 		}
 	}
@@ -199,13 +192,13 @@
 		snd_dma_free_pages(buf);
 }
 
-
 /*
  * This function writes to the SoundScape's control registers,
  * but doesn't do any locking. It's up to the caller to do that.
  * This is why this function is "unsafe" ...
  */
-static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val)
+static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
+				       unsigned char val)
 {
 	outb(reg, ODIE_ADDR_IO(io_base));
 	outb(val, ODIE_DATA_IO(io_base));
@@ -215,7 +208,8 @@
  * Write to the SoundScape's control registers, and do the
  * necessary locking ...
  */
-static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val)
+static void sscape_write(struct soundscape *s, enum GA_REG reg,
+			 unsigned char val)
 {
 	unsigned long flags;
 
@@ -228,7 +222,8 @@
  * Read from the SoundScape's control registers, but leave any
  * locking to the caller. This is why the function is "unsafe" ...
  */
-static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg)
+static inline unsigned char sscape_read_unsafe(unsigned io_base,
+					       enum GA_REG reg)
 {
 	outb(reg, ODIE_ADDR_IO(io_base));
 	return inb(ODIE_DATA_IO(io_base));
@@ -257,9 +252,8 @@
 static inline int host_read_unsafe(unsigned io_base)
 {
 	int data = -1;
-	if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) {
+	if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
 		data = inb(HOST_DATA_IO(io_base));
-	}
 
 	return data;
 }
@@ -301,7 +295,7 @@
  * Also leaves all locking-issues to the caller ...
  */
 static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
-                                  unsigned timeout)
+				  unsigned timeout)
 {
 	int err;
 
@@ -320,7 +314,7 @@
  *
  * NOTE: This check is based upon observation, not documentation.
  */
-static inline int verify_mpu401(const struct snd_mpu401 * mpu)
+static inline int verify_mpu401(const struct snd_mpu401 *mpu)
 {
 	return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
 }
@@ -328,7 +322,7 @@
 /*
  * This is apparently the standard way to initailise an MPU-401
  */
-static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
+static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
 {
 	outb(0, MPU401D(mpu));
 }
@@ -338,9 +332,10 @@
  * The AD1845 detection fails if we *don't* do this, so I
  * think that this is a good idea ...
  */
-static inline void activate_ad1845_unsafe(unsigned io_base)
+static void activate_ad1845_unsafe(unsigned io_base)
 {
-	sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10);
+	unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
+	sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
 	sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
 }
 
@@ -359,24 +354,27 @@
  * Tell the SoundScape to begin a DMA tranfer using the given channel.
  * All locking issues are left to the caller.
  */
-static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
+static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
 {
-	sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01);
-	sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe);
+	sscape_write_unsafe(io_base, reg,
+			    sscape_read_unsafe(io_base, reg) | 0x01);
+	sscape_write_unsafe(io_base, reg,
+			    sscape_read_unsafe(io_base, reg) & 0xfe);
 }
 
 /*
  * Wait for a DMA transfer to complete. This is a "limited busy-wait",
  * and all locking issues are left to the caller.
  */
-static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout)
+static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
+				  unsigned timeout)
 {
 	while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
 		udelay(100);
 		--timeout;
 	} /* while */
 
-	return (sscape_read_unsafe(io_base, reg) & 0x01);
+	return sscape_read_unsafe(io_base, reg) & 0x01;
 }
 
 /*
@@ -392,12 +390,12 @@
 
 	do {
 		unsigned long flags;
-		unsigned char x;
+		int x;
 
 		spin_lock_irqsave(&s->lock, flags);
-		x = inb(HOST_DATA_IO(s->io_base));
+		x = host_read_unsafe(s->io_base);
 		spin_unlock_irqrestore(&s->lock, flags);
-		if ((x & 0xfe) == 0xfe)
+		if (x == 0xfe || x == 0xff)
 			return 1;
 
 		msleep(10);
@@ -419,10 +417,10 @@
 
 	do {
 		unsigned long flags;
-		unsigned char x;
+		int x;
 
 		spin_lock_irqsave(&s->lock, flags);
-		x = inb(HOST_DATA_IO(s->io_base));
+		x = host_read_unsafe(s->io_base);
 		spin_unlock_irqrestore(&s->lock, flags);
 		if (x == 0xfe)
 			return 1;
@@ -436,15 +434,15 @@
 /*
  * Upload a byte-stream into the SoundScape using DMA channel A.
  */
-static int upload_dma_data(struct soundscape *s,
-                           const unsigned char __user *data,
-                           size_t size)
+static int upload_dma_data(struct soundscape *s, const unsigned char *data,
+			   size_t size)
 {
 	unsigned long flags;
 	struct snd_dma_buffer dma;
 	int ret;
+	unsigned char val;
 
-	if (!get_dmabuf(&dma, PAGE_ALIGN(size)))
+	if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
 		return -ENOMEM;
 
 	spin_lock_irqsave(&s->lock, flags);
@@ -452,70 +450,57 @@
 	/*
 	 * Reset the board ...
 	 */
-	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f);
+	val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
 
 	/*
 	 * Enable the DMA channels and configure them ...
 	 */
-	sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50);
-	sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT);
+	val = (s->chip->dma1 << 4) | DMA_8BIT;
+	sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
 	sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
 
 	/*
 	 * Take the board out of reset ...
 	 */
-	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80);
+	val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
 
 	/*
-	 * Upload the user's data (firmware?) to the SoundScape
+	 * Upload the firmware to the SoundScape
 	 * board through the DMA channel ...
 	 */
 	while (size != 0) {
 		unsigned long len;
 
-		/*
-		 * Apparently, copying to/from userspace can sleep.
-		 * We are therefore forbidden from holding any
-		 * spinlocks while we copy ...
-		 */
-		spin_unlock_irqrestore(&s->lock, flags);
-
-		/*
-		 * Remember that the data that we want to DMA
-		 * comes from USERSPACE. We have already verified
-		 * the userspace pointer ...
-		 */
 		len = min(size, dma.bytes);
-		len -= __copy_from_user(dma.area, data, len);
+		memcpy(dma.area, data, len);
 		data += len;
 		size -= len;
 
-		/*
-		 * Grab that spinlock again, now that we've
-		 * finished copying!
-		 */
-		spin_lock_irqsave(&s->lock, flags);
-
 		snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
 		sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
 		if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
 			/*
-			 * Don't forget to release this spinlock we're holding ...
+			 * Don't forget to release this spinlock we're holding
 			 */
 			spin_unlock_irqrestore(&s->lock, flags);
 
-			snd_printk(KERN_ERR "sscape: DMA upload has timed out\n");
+			snd_printk(KERN_ERR
+					"sscape: DMA upload has timed out\n");
 			ret = -EAGAIN;
 			goto _release_dma;
 		}
 	} /* while */
 
 	set_host_mode_unsafe(s->io_base);
+	outb(0x0, s->io_base);
 
 	/*
 	 * Boot the board ... (I think)
 	 */
-	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40);
+	val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
 	spin_unlock_irqrestore(&s->lock, flags);
 
 	/*
@@ -525,10 +510,12 @@
 	 */
 	ret = 0;
 	if (!obp_startup_ack(s, 5000)) {
-		snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n");
+		snd_printk(KERN_ERR "sscape: No response "
+				    "from on-board processor after upload\n");
 		ret = -EAGAIN;
 	} else if (!host_startup_ack(s, 5000)) {
-		snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n");
+		snd_printk(KERN_ERR
+				"sscape: SoundScape failed to initialise\n");
 		ret = -EAGAIN;
 	}
 
@@ -536,7 +523,7 @@
 	/*
 	 * NOTE!!! We are NOT holding any spinlocks at this point !!!
 	 */
-	sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40));
+	sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
 	free_dmabuf(&dma);
 
 	return ret;
@@ -546,167 +533,76 @@
  * Upload the bootblock(?) into the SoundScape. The only
  * purpose of this block of code seems to be to tell
  * us which version of the microcode we should be using.
- *
- * NOTE: The boot-block data resides in USER-SPACE!!!
- *       However, we have already verified its memory
- *       addresses by the time we get here.
  */
-static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb)
+static int sscape_upload_bootblock(struct snd_card *card)
 {
+	struct soundscape *sscape = get_card_soundscape(card);
 	unsigned long flags;
+	const struct firmware *init_fw = NULL;
 	int data = 0;
 	int ret;
 
-	ret = upload_dma_data(sscape, bb->code, sizeof(bb->code));
+	ret = request_firmware(&init_fw, "scope.cod", card->dev);
+	if (ret < 0) {
+		snd_printk(KERN_ERR "sscape: Error loading scope.cod");
+		return ret;
+	}
+	ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
+
+	release_firmware(init_fw);
 
 	spin_lock_irqsave(&sscape->lock, flags);
-	if (ret == 0) {
+	if (ret == 0)
 		data = host_read_ctrl_unsafe(sscape->io_base, 100);
-	}
-	set_midi_mode_unsafe(sscape->io_base);
+
+	if (data & 0x10)
+		sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
+
 	spin_unlock_irqrestore(&sscape->lock, flags);
 
-	if (ret == 0) {
-		if (data < 0) {
-			snd_printk(KERN_ERR "sscape: timeout reading firmware version\n");
-			ret = -EAGAIN;
-		}
-		else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) {
-			ret = -EFAULT;
-		}
+	data &= 0xf;
+	if (ret == 0 && data > 7) {
+		snd_printk(KERN_ERR
+				"sscape: timeout reading firmware version\n");
+		ret = -EAGAIN;
 	}
 
-	return ret;
+	return (ret == 0) ? data : ret;
 }
 
 /*
- * Upload the microcode into the SoundScape. The
- * microcode is 64K of data, and if we try to copy
- * it into a local variable then we will SMASH THE
- * KERNEL'S STACK! We therefore leave it in USER
- * SPACE, and save ourselves from copying it at all.
+ * Upload the microcode into the SoundScape.
  */
-static int sscape_upload_microcode(struct soundscape *sscape,
-                                   const struct sscape_microcode __user *mc)
+static int sscape_upload_microcode(struct snd_card *card, int version)
 {
-	unsigned long flags;
-	char __user *code;
+	struct soundscape *sscape = get_card_soundscape(card);
+	const struct firmware *init_fw = NULL;
+	char name[14];
 	int err;
 
-	/*
-	 * We are going to have to copy this data into a special
-	 * DMA-able buffer before we can upload it. We shall therefore
-	 * just check that the data pointer is valid for now.
-	 *
-	 * NOTE: This buffer is 64K long! That's WAY too big to
-	 *       copy into a stack-temporary anyway.
-	 */
-	if ( get_user(code, &mc->code) ||
-	     !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) )
-		return -EFAULT;
+	snprintf(name, sizeof(name), "sndscape.co%d", version);
 
-	if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) {
-		snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n");
+	err = request_firmware(&init_fw, name, card->dev);
+	if (err < 0) {
+		snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
+				version);
+		return err;
 	}
+	err = upload_dma_data(sscape, init_fw->data, init_fw->size);
+	if (err == 0)
+		snd_printk(KERN_INFO "sscape: MIDI firmware loaded %d KBs\n",
+				init_fw->size >> 10);
 
-	spin_lock_irqsave(&sscape->lock, flags);
-	set_midi_mode_unsafe(sscape->io_base);
-	spin_unlock_irqrestore(&sscape->lock, flags);
-
-	initialise_mpu401(sscape->mpu);
+	release_firmware(init_fw);
 
 	return err;
 }
 
 /*
- * Hardware-specific device functions, to implement special
- * IOCTLs for the SoundScape card. This is how we upload
- * the microcode into the card, for example, and so we
- * must ensure that no two processes can open this device
- * simultaneously, and that we can't open it at all if
- * someone is using the MIDI device.
- */
-static int sscape_hw_open(struct snd_hwdep * hw, struct file *file)
-{
-	register struct soundscape *sscape = get_hwdep_soundscape(hw);
-	unsigned long flags;
-	int err;
-
-	spin_lock_irqsave(&sscape->fwlock, flags);
-
-	if ((sscape->midi_usage != 0) || sscape->hw_in_use) {
-		err = -EBUSY;
-	} else {
-		sscape->hw_in_use = 1;
-		err = 0;
-	}
-
-	spin_unlock_irqrestore(&sscape->fwlock, flags);
-	return err;
-}
-
-static int sscape_hw_release(struct snd_hwdep * hw, struct file *file)
-{
-	register struct soundscape *sscape = get_hwdep_soundscape(hw);
-	unsigned long flags;
-
-	spin_lock_irqsave(&sscape->fwlock, flags);
-	sscape->hw_in_use = 0;
-	spin_unlock_irqrestore(&sscape->fwlock, flags);
-	return 0;
-}
-
-static int sscape_hw_ioctl(struct snd_hwdep * hw, struct file *file,
-                           unsigned int cmd, unsigned long arg)
-{
-	struct soundscape *sscape = get_hwdep_soundscape(hw);
-	int err = -EBUSY;
-
-	switch (cmd) {
-	case SND_SSCAPE_LOAD_BOOTB:
-		{
-			register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg;
-
-			/*
-			 * We are going to have to copy this data into a special
-			 * DMA-able buffer before we can upload it. We shall therefore
-			 * just check that the data pointer is valid for now ...
-			 */
-			if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) )
-				return -EFAULT;
-
-			/*
-			 * Now check that we can write the firmware version number too...
-			 */
-			if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) )
-				return -EFAULT;
-
-			err = sscape_upload_bootblock(sscape, bb);
-		}
-		break;
-
-	case SND_SSCAPE_LOAD_MCODE:
-		{
-			register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg;
-
-			err = sscape_upload_microcode(sscape, mc);
-		}
-		break;
-
-	default:
-		err = -EINVAL;
-		break;
-	} /* switch */
-
-	return err;
-}
-
-
-/*
  * Mixer control for the SoundScape's MIDI device.
  */
 static int sscape_midi_info(struct snd_kcontrol *ctl,
-                            struct snd_ctl_elem_info *uinfo)
+			    struct snd_ctl_elem_info *uinfo)
 {
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = 1;
@@ -716,7 +612,7 @@
 }
 
 static int sscape_midi_get(struct snd_kcontrol *kctl,
-                           struct snd_ctl_elem_value *uctl)
+			   struct snd_ctl_elem_value *uctl)
 {
 	struct snd_wss *chip = snd_kcontrol_chip(kctl);
 	struct snd_card *card = chip->card;
@@ -730,16 +626,18 @@
 }
 
 static int sscape_midi_put(struct snd_kcontrol *kctl,
-                           struct snd_ctl_elem_value *uctl)
+			   struct snd_ctl_elem_value *uctl)
 {
 	struct snd_wss *chip = snd_kcontrol_chip(kctl);
 	struct snd_card *card = chip->card;
-	register struct soundscape *s = get_card_soundscape(card);
+	struct soundscape *s = get_card_soundscape(card);
 	unsigned long flags;
 	int change;
+	unsigned char new_val;
 
 	spin_lock_irqsave(&s->lock, flags);
 
+	new_val = uctl->value.integer.value[0] & 127;
 	/*
 	 * We need to put the board into HOST mode before we
 	 * can send any volume-changing HOST commands ...
@@ -752,15 +650,16 @@
 	 * and then perform another volume-related command. Perhaps the
 	 * first command is an "open" and the second command is a "close"?
 	 */
-	if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) {
+	if (s->midi_vol == new_val) {
 		change = 0;
 		goto __skip_change;
 	}
-	change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
-	          && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100)
-	          && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100));
-	s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127;
-      __skip_change:
+	change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
+		 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
+		 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
+		 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
+	s->midi_vol = new_val;
+__skip_change:
 
 	/*
 	 * Take the board out of HOST mode and back into MIDI mode ...
@@ -784,20 +683,25 @@
  * These IRQs are encoded as bit patterns so that they can be
  * written to the control registers.
  */
-static unsigned __devinit get_irq_config(int irq)
+static unsigned __devinit get_irq_config(int sscape_type, int irq)
 {
 	static const int valid_irq[] = { 9, 5, 7, 10 };
+	static const int old_irq[] = { 9, 7, 5, 15 };
 	unsigned cfg;
 
-	for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) {
-		if (irq == valid_irq[cfg])
-			return cfg;
-	} /* for */
+	if (sscape_type == MEDIA_FX) {
+		for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
+			if (irq == old_irq[cfg])
+				return cfg;
+	} else {
+		for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
+			if (irq == valid_irq[cfg])
+				return cfg;
+	}
 
 	return INVALID_IRQ;
 }
 
-
 /*
  * Perform certain arcane port-checks to see whether there
  * is a SoundScape board lurking behind the given ports.
@@ -842,11 +746,15 @@
 	if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
 		goto _done;
 
-	d  = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
-	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+	if (s->ic_type == IC_OPUS)
+		activate_ad1845_unsafe(s->io_base);
 
 	if (s->type == SSCAPE_VIVO)
 		wss_io += 4;
+
+	d  = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+
 	/* wait for WSS codec */
 	for (d = 0; d < 500; d++) {
 		if ((inb(wss_io) & 0x80) == 0)
@@ -855,14 +763,36 @@
 		msleep(1);
 		spin_lock_irqsave(&s->lock, flags);
 	}
-	snd_printd(KERN_INFO "init delay = %d ms\n", d);
+
+	if ((inb(wss_io) & 0x80) != 0)
+		goto _done;
+
+	if (inb(wss_io + 2) == 0xff)
+		goto _done;
+
+	d  = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
+	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
+
+	if ((inb(wss_io) & 0x80) != 0)
+		s->type = MEDIA_FX;
+
+	d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+	sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+	/* wait for WSS codec */
+	for (d = 0; d < 500; d++) {
+		if ((inb(wss_io) & 0x80) == 0)
+			break;
+		spin_unlock_irqrestore(&s->lock, flags);
+		msleep(1);
+		spin_lock_irqsave(&s->lock, flags);
+	}
 
 	/*
 	 * SoundScape successfully detected!
 	 */
 	retval = 1;
 
-	_done:
+_done:
 	spin_unlock_irqrestore(&s->lock, flags);
 	return retval;
 }
@@ -873,63 +803,35 @@
  * to crash the machine. Also check that someone isn't using the hardware
  * IOCTL device.
  */
-static int mpu401_open(struct snd_mpu401 * mpu)
+static int mpu401_open(struct snd_mpu401 *mpu)
 {
-	int err;
-
 	if (!verify_mpu401(mpu)) {
-		snd_printk(KERN_ERR "sscape: MIDI disabled, please load firmware\n");
-		err = -ENODEV;
-	} else {
-		register struct soundscape *sscape = get_mpu401_soundscape(mpu);
-		unsigned long flags;
-
-		spin_lock_irqsave(&sscape->fwlock, flags);
-
-		if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) {
-			err = -EBUSY;
-		} else {
-			++(sscape->midi_usage);
-			err = 0;
-		}
-
-		spin_unlock_irqrestore(&sscape->fwlock, flags);
+		snd_printk(KERN_ERR "sscape: MIDI disabled, "
+				    "please load firmware\n");
+		return -ENODEV;
 	}
 
-	return err;
-}
-
-static void mpu401_close(struct snd_mpu401 * mpu)
-{
-	register struct soundscape *sscape = get_mpu401_soundscape(mpu);
-	unsigned long flags;
-
-	spin_lock_irqsave(&sscape->fwlock, flags);
-	--(sscape->midi_usage);
-	spin_unlock_irqrestore(&sscape->fwlock, flags);
+	return 0;
 }
 
 /*
  * Initialse an MPU-401 subdevice for MIDI support on the SoundScape.
  */
-static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq)
+static int __devinit create_mpu401(struct snd_card *card, int devnum,
+				   unsigned long port, int irq)
 {
 	struct soundscape *sscape = get_card_soundscape(card);
 	struct snd_rawmidi *rawmidi;
 	int err;
 
-	if ((err = snd_mpu401_uart_new(card, devnum,
-	                               MPU401_HW_MPU401,
-	                               port, MPU401_INFO_INTEGRATED,
-	                               irq, IRQF_DISABLED,
-	                               &rawmidi)) == 0) {
-		struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data;
+	err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
+				  MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
+				  &rawmidi);
+	if (err == 0) {
+		struct snd_mpu401 *mpu = rawmidi->private_data;
 		mpu->open_input = mpu401_open;
 		mpu->open_output = mpu401_open;
-		mpu->close_input = mpu401_close;
-		mpu->close_output = mpu401_close;
 		mpu->private_data = sscape;
-		sscape->mpu = mpu;
 
 		initialise_mpu401(mpu);
 	}
@@ -950,32 +852,34 @@
 	register struct soundscape *sscape = get_card_soundscape(card);
 	struct snd_wss *chip;
 	int err;
+	int codec_type = WSS_HW_DETECT;
 
-	if (sscape->type == SSCAPE_VIVO)
+	switch (sscape->type) {
+	case MEDIA_FX:
+	case SSCAPE:
+		/*
+		 * There are some freak examples of early Soundscape cards
+		 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
+		 * CS4231 works only in CS4248 compatibility mode on
+		 * these cards so force it.
+		 */
+		if (sscape->ic_type != IC_OPUS)
+			codec_type = WSS_HW_AD1848;
+		break;
+
+	case SSCAPE_VIVO:
 		port += 4;
-
-	if (dma1 == dma2)
-		dma2 = -1;
+		break;
+	default:
+		break;
+	}
 
 	err = snd_wss_create(card, port, -1, irq, dma1, dma2,
-			     WSS_HW_DETECT, WSS_HWSHARE_DMA1, &chip);
+			     codec_type, WSS_HWSHARE_DMA1, &chip);
 	if (!err) {
 		unsigned long flags;
 		struct snd_pcm *pcm;
 
-/*
- * It turns out that the PLAYBACK_ENABLE bit is set
- * by the lowlevel driver ...
- *
-#define AD1845_IFACE_CONFIG  \
-           (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE)
-    snd_wss_mce_up(chip);
-    spin_lock_irqsave(&chip->reg_lock, flags);
-    snd_wss_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG);
-    spin_unlock_irqrestore(&chip->reg_lock, flags);
-    snd_wss_mce_down(chip);
- */
-
 		if (sscape->type != SSCAPE_VIVO) {
 			/*
 			 * The input clock frequency on the SoundScape must
@@ -1022,17 +926,10 @@
 			}
 		}
 
-		strcpy(card->driver, "SoundScape");
-		strcpy(card->shortname, pcm->name);
-		snprintf(card->longname, sizeof(card->longname),
-			 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
-			 pcm->name, chip->port, chip->irq,
-			 chip->dma1, chip->dma2);
-
 		sscape->chip = chip;
 	}
 
-	_error:
+_error:
 	return err;
 }
 
@@ -1051,21 +948,8 @@
 	struct resource *wss_res;
 	unsigned long flags;
 	int err;
-
-	/*
-	 * Check that the user didn't pass us garbage data ...
-	 */
-	irq_cfg = get_irq_config(irq[dev]);
-	if (irq_cfg == INVALID_IRQ) {
-		snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
-		return -ENXIO;
-	}
-
-	mpu_irq_cfg = get_irq_config(mpu_irq[dev]);
-	if (mpu_irq_cfg == INVALID_IRQ) {
-		printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
-		return -ENXIO;
-	}
+	int val;
+	const char *name;
 
 	/*
 	 * Grab IO ports that we will need to probe so that we
@@ -1098,41 +982,51 @@
 	}
 
 	spin_lock_init(&sscape->lock);
-	spin_lock_init(&sscape->fwlock);
 	sscape->io_res = io_res;
 	sscape->wss_res = wss_res;
 	sscape->io_base = port[dev];
 
 	if (!detect_sscape(sscape, wss_port[dev])) {
-		printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base);
+		printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
+			sscape->io_base);
 		err = -ENODEV;
 		goto _release_dma;
 	}
 
-	printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n",
-			 sscape->io_base, irq[dev], dma[dev]);
+	switch (sscape->type) {
+	case MEDIA_FX:
+		name = "MediaFX/SoundFX";
+		break;
+	case SSCAPE:
+		name = "Soundscape";
+		break;
+	case SSCAPE_PNP:
+		name = "Soundscape PnP";
+		break;
+	case SSCAPE_VIVO:
+		name = "Soundscape VIVO";
+		break;
+	default:
+		name = "unknown Soundscape";
+		break;
+	}
 
-	if (sscape->type != SSCAPE_VIVO) {
-		/*
-		 * Now create the hardware-specific device so that we can
-		 * load the microcode into the on-board processor.
-		 * We cannot use the MPU-401 MIDI system until this firmware
-		 * has been loaded into the card.
-		 */
-		err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw));
-		if (err < 0) {
-			printk(KERN_ERR "sscape: Failed to create "
-					"firmware device\n");
-			goto _release_dma;
-		}
-		strlcpy(sscape->hw->name, "SoundScape M68K",
-			sizeof(sscape->hw->name));
-		sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0';
-		sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE;
-		sscape->hw->ops.open = sscape_hw_open;
-		sscape->hw->ops.release = sscape_hw_release;
-		sscape->hw->ops.ioctl = sscape_hw_ioctl;
-		sscape->hw->private_data = sscape;
+	printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
+			 name, sscape->io_base, irq[dev], dma[dev]);
+
+	/*
+	 * Check that the user didn't pass us garbage data ...
+	 */
+	irq_cfg = get_irq_config(sscape->type, irq[dev]);
+	if (irq_cfg == INVALID_IRQ) {
+		snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
+		return -ENXIO;
+	}
+
+	mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
+	if (mpu_irq_cfg == INVALID_IRQ) {
+		snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
+		return -ENXIO;
 	}
 
 	/*
@@ -1141,9 +1035,6 @@
 	 */
 	spin_lock_irqsave(&sscape->lock, flags);
 
-	activate_ad1845_unsafe(sscape->io_base);
-
-	sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */
 	sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
 	sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
 
@@ -1151,15 +1042,23 @@
 	 * Enable and configure the DMA channels ...
 	 */
 	sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
-	dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40);
+	dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
 	sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
 	sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
 
-	sscape_write_unsafe(sscape->io_base,
-	                    GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg);
+	mpu_irq_cfg |= mpu_irq_cfg << 2;
+	val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
+	if (joystick[dev])
+		val |= 8;
+	sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
+	sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
 	sscape_write_unsafe(sscape->io_base,
 			    GA_CDCFG_REG, 0x09 | DMA_8BIT
 			    | (dma[dev] << 4) | (irq_cfg << 1));
+	/*
+	 * Enable the master IRQ ...
+	 */
+	sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
 
 	spin_unlock_irqrestore(&sscape->lock, flags);
 
@@ -1170,32 +1069,56 @@
 	err = create_ad1845(card, wss_port[dev], irq[dev],
 			    dma[dev], dma2[dev]);
 	if (err < 0) {
-		printk(KERN_ERR "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
-		       wss_port[dev], irq[dev]);
+		snd_printk(KERN_ERR
+				"sscape: No AD1845 device at 0x%lx, IRQ %d\n",
+				wss_port[dev], irq[dev]);
 		goto _release_dma;
 	}
+	strcpy(card->driver, "SoundScape");
+	strcpy(card->shortname, name);
+	snprintf(card->longname, sizeof(card->longname),
+		 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
+		 name, sscape->chip->port, sscape->chip->irq,
+		 sscape->chip->dma1, sscape->chip->dma2);
+
 #define MIDI_DEVNUM  0
 	if (sscape->type != SSCAPE_VIVO) {
-		err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]);
-		if (err < 0) {
-			printk(KERN_ERR "sscape: Failed to create "
-					"MPU-401 device at 0x%lx\n",
-					port[dev]);
-			goto _release_dma;
+		err = sscape_upload_bootblock(card);
+		if (err >= 0)
+			err = sscape_upload_microcode(card, err);
+
+		if (err == 0) {
+			err = create_mpu401(card, MIDI_DEVNUM, port[dev],
+					    mpu_irq[dev]);
+			if (err < 0) {
+				snd_printk(KERN_ERR "sscape: Failed to create "
+						"MPU-401 device at 0x%lx\n",
+						port[dev]);
+				goto _release_dma;
+			}
+
+			/*
+			 * Initialize mixer
+			 */
+			spin_lock_irqsave(&sscape->lock, flags);
+			sscape->midi_vol = 0;
+			host_write_ctrl_unsafe(sscape->io_base,
+						CMD_SET_MIDI_VOL, 100);
+			host_write_ctrl_unsafe(sscape->io_base,
+						sscape->midi_vol, 100);
+			host_write_ctrl_unsafe(sscape->io_base,
+						CMD_XXX_MIDI_VOL, 100);
+			host_write_ctrl_unsafe(sscape->io_base,
+						sscape->midi_vol, 100);
+			host_write_ctrl_unsafe(sscape->io_base,
+						CMD_SET_EXTMIDI, 100);
+			host_write_ctrl_unsafe(sscape->io_base,
+						0, 100);
+			host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
+
+			set_midi_mode_unsafe(sscape->io_base);
+			spin_unlock_irqrestore(&sscape->lock, flags);
 		}
-
-		/*
-		 * Enable the master IRQ ...
-		 */
-		sscape_write(sscape, GA_INTENA_REG, 0x80);
-
-		/*
-		 * Initialize mixer
-		 */
-		sscape->midi_vol = 0;
-		host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100);
-		host_write_ctrl_unsafe(sscape->io_base, 0, 100);
-		host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100);
 	}
 
 	/*
@@ -1231,7 +1154,8 @@
 	    mpu_irq[i] == SNDRV_AUTO_IRQ ||
 	    dma[i] == SNDRV_AUTO_DMA) {
 		printk(KERN_INFO
-		       "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n");
+		       "sscape: insufficient parameters, "
+		       "need IO, IRQ, MPU-IRQ and DMA\n");
 		return 0;
 	}
 
@@ -1253,13 +1177,15 @@
 	sscape->type = SSCAPE;
 
 	dma[dev] &= 0x03;
+	snd_card_set_dev(card, pdev);
+
 	ret = create_sscape(dev, card);
 	if (ret < 0)
 		goto _release_card;
 
-	snd_card_set_dev(card, pdev);
-	if ((ret = snd_card_register(card)) < 0) {
-		printk(KERN_ERR "sscape: Failed to register sound card\n");
+	ret = snd_card_register(card);
+	if (ret < 0) {
+		snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
 		goto _release_card;
 	}
 	dev_set_drvdata(pdev, card);
@@ -1311,36 +1237,20 @@
 	 * Allow this function to fail *quietly* if all the ISA PnP
 	 * devices were configured using module parameters instead.
 	 */
-	if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS)
+	idx = get_next_autoindex(idx);
+	if (idx >= SNDRV_CARDS)
 		return -ENOSPC;
 
 	/*
-	 * We have found a candidate ISA PnP card. Now we
-	 * have to check that it has the devices that we
-	 * expect it to have.
-	 *
-	 * We will NOT try and autoconfigure all of the resources
-	 * needed and then activate the card as we are assuming that
-	 * has already been done at boot-time using /proc/isapnp.
-	 * We shall simply try to give each active card the resources
-	 * that it wants. This is a sensible strategy for a modular
-	 * system where unused modules are unloaded regularly.
-	 *
-	 * This strategy is utterly useless if we compile the driver
-	 * into the kernel, of course.
-	 */
-	// printk(KERN_INFO "sscape: %s\n", card->name);
-
-	/*
 	 * Check that we still have room for another sound card ...
 	 */
 	dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
-	if (! dev)
+	if (!dev)
 		return -ENODEV;
 
 	if (!pnp_is_active(dev)) {
 		if (pnp_activate_dev(dev) < 0) {
-			printk(KERN_INFO "sscape: device is inactive\n");
+			snd_printk(KERN_INFO "sscape: device is inactive\n");
 			return -EBUSY;
 		}
 	}
@@ -1378,14 +1288,15 @@
 		wss_port[idx] = pnp_port_start(dev, 1);
 		dma2[idx] = pnp_dma(dev, 1);
 	}
+	snd_card_set_dev(card, &pcard->card->dev);
 
 	ret = create_sscape(idx, card);
 	if (ret < 0)
 		goto _release_card;
 
-	snd_card_set_dev(card, &pcard->card->dev);
-	if ((ret = snd_card_register(card)) < 0) {
-		printk(KERN_ERR "sscape: Failed to register sound card\n");
+	ret = snd_card_register(card);
+	if (ret < 0) {
+		snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
 		goto _release_card;
 	}
 
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 5d2ba1b..5b9d6c1 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -1682,7 +1682,7 @@
 }
 #endif /* CONFIG_PM */
 
-int snd_wss_free(struct snd_wss *chip)
+static int snd_wss_free(struct snd_wss *chip)
 {
 	release_and_free_resource(chip->res_port);
 	release_and_free_resource(chip->res_cport);
@@ -1705,7 +1705,6 @@
 	kfree(chip);
 	return 0;
 }
-EXPORT_SYMBOL(snd_wss_free);
 
 static int snd_wss_dev_free(struct snd_device *device)
 {
@@ -2198,64 +2197,26 @@
 static const DECLARE_TLV_DB_SCALE(db_scale_6bit, -9450, 150, 0);
 static const DECLARE_TLV_DB_SCALE(db_scale_5bit_12db_max, -3450, 150, 0);
 static const DECLARE_TLV_DB_SCALE(db_scale_rec_gain, 0, 150, 0);
-
-static struct snd_kcontrol_new snd_ad1848_controls[] = {
-WSS_DOUBLE("PCM Playback Switch", 0, CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT,
-	   7, 7, 1, 1),
-WSS_DOUBLE_TLV("PCM Playback Volume", 0,
-	       CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1,
-	       db_scale_6bit),
-WSS_DOUBLE("Aux Playback Switch", 0,
-	   CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE_TLV("Aux Playback Volume", 0,
-	       CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1,
-	       db_scale_5bit_12db_max),
-WSS_DOUBLE("Aux Playback Switch", 1,
-	   CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE_TLV("Aux Playback Volume", 1,
-	       CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1,
-	       db_scale_5bit_12db_max),
-WSS_DOUBLE_TLV("Capture Volume", 0, CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT,
-		0, 0, 15, 0, db_scale_rec_gain),
-{
-	.name = "Capture Source",
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.info = snd_wss_info_mux,
-	.get = snd_wss_get_mux,
-	.put = snd_wss_put_mux,
-},
-WSS_SINGLE("Loopback Capture Switch", 0, CS4231_LOOPBACK, 0, 1, 0),
-WSS_SINGLE_TLV("Loopback Capture Volume", 0, CS4231_LOOPBACK, 1, 63, 0,
-	       db_scale_6bit),
-};
+static const DECLARE_TLV_DB_SCALE(db_scale_4bit, -4500, 300, 0);
 
 static struct snd_kcontrol_new snd_wss_controls[] = {
 WSS_DOUBLE("PCM Playback Switch", 0,
 		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
-WSS_DOUBLE("PCM Playback Volume", 0,
-		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1),
-WSS_DOUBLE("Line Playback Switch", 0,
-		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
-WSS_DOUBLE("Line Playback Volume", 0,
-		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("PCM Playback Volume", 0,
+		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1,
+		db_scale_6bit),
 WSS_DOUBLE("Aux Playback Switch", 0,
 		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Playback Volume", 0,
-		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Aux Playback Volume", 0,
+		CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
 WSS_DOUBLE("Aux Playback Switch", 1,
 		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Playback Volume", 1,
-		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1),
-WSS_SINGLE("Mono Playback Switch", 0,
-		CS4231_MONO_CTRL, 7, 1, 1),
-WSS_SINGLE("Mono Playback Volume", 0,
-		CS4231_MONO_CTRL, 0, 15, 1),
-WSS_SINGLE("Mono Output Playback Switch", 0,
-		CS4231_MONO_CTRL, 6, 1, 1),
-WSS_SINGLE("Mono Output Playback Bypass", 0,
-		CS4231_MONO_CTRL, 5, 1, 0),
-WSS_DOUBLE("Capture Volume", 0,
-		CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 0, 0, 15, 0),
+WSS_DOUBLE_TLV("Aux Playback Volume", 1,
+		CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
+WSS_DOUBLE_TLV("Capture Volume", 0, CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT,
+		0, 0, 15, 0, db_scale_rec_gain),
 {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.name = "Capture Source",
@@ -2263,19 +2224,34 @@
 	.get = snd_wss_get_mux,
 	.put = snd_wss_put_mux,
 },
-WSS_DOUBLE("Mic Boost", 0,
+WSS_DOUBLE("Mic Boost (+20dB)", 0,
 		CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 5, 5, 1, 0),
 WSS_SINGLE("Loopback Capture Switch", 0,
 		CS4231_LOOPBACK, 0, 1, 0),
-WSS_SINGLE("Loopback Capture Volume", 0,
-		CS4231_LOOPBACK, 2, 63, 1)
+WSS_SINGLE_TLV("Loopback Capture Volume", 0, CS4231_LOOPBACK, 2, 63, 1,
+		db_scale_6bit),
+WSS_DOUBLE("Line Playback Switch", 0,
+		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
+WSS_DOUBLE_TLV("Line Playback Volume", 0,
+		CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1,
+		db_scale_5bit_12db_max),
+WSS_SINGLE("Beep Playback Switch", 0,
+		CS4231_MONO_CTRL, 7, 1, 1),
+WSS_SINGLE_TLV("Beep Playback Volume", 0,
+		CS4231_MONO_CTRL, 0, 15, 1,
+		db_scale_4bit),
+WSS_SINGLE("Mono Output Playback Switch", 0,
+		CS4231_MONO_CTRL, 6, 1, 1),
+WSS_SINGLE("Beep Bypass Playback Switch", 0,
+		CS4231_MONO_CTRL, 5, 1, 0),
 };
 
 static struct snd_kcontrol_new snd_opti93x_controls[] = {
 WSS_DOUBLE("Master Playback Switch", 0,
 		OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1),
-WSS_DOUBLE("Master Playback Volume", 0,
-		OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1),
+WSS_DOUBLE_TLV("Master Playback Volume", 0,
+		OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1,
+		db_scale_6bit),
 WSS_DOUBLE("PCM Playback Switch", 0,
 		CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
 WSS_DOUBLE("PCM Playback Volume", 0,
@@ -2334,22 +2310,21 @@
 			if (err < 0)
 				return err;
 		}
-	else if (chip->hardware & WSS_HW_AD1848_MASK)
-		for (idx = 0; idx < ARRAY_SIZE(snd_ad1848_controls); idx++) {
-			err = snd_ctl_add(card,
-					snd_ctl_new1(&snd_ad1848_controls[idx],
-						     chip));
-			if (err < 0)
-				return err;
-		}
-	else
-		for (idx = 0; idx < ARRAY_SIZE(snd_wss_controls); idx++) {
+	else {
+		int count = ARRAY_SIZE(snd_wss_controls);
+
+		/* Use only the first 11 entries on AD1848 */
+		if (chip->hardware & WSS_HW_AD1848_MASK)
+			count = 11;
+
+		for (idx = 0; idx < count; idx++) {
 			err = snd_ctl_add(card,
 					snd_ctl_new1(&snd_wss_controls[idx],
 						     chip));
 			if (err < 0)
 				return err;
 		}
+	}
 	return 0;
 }
 EXPORT_SYMBOL(snd_wss_mixer);
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index bcf2a06..135a2b7 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -287,18 +287,6 @@
 
 	  Say Y unless you have 16MB or more RAM or a PCI sound card.
 
-config SOUND_SSCAPE
-	tristate "Ensoniq SoundScape support"
-	help
-	  Answer Y if you have a sound card based on the Ensoniq SoundScape
-	  chipset. Such cards are being manufactured at least by Ensoniq, Spea
-	  and Reveal (Reveal makes also other cards).
-
-	  If you compile the driver into the kernel, you have to add
-	  "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
-	  line.
-
-
 config SOUND_VMIDI
 	tristate "Loopback MIDI device support"
 	help
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index e0ae4d4..567b8a7 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -13,7 +13,6 @@
 obj-$(CONFIG_SOUND_AEDSP16)	+= aedsp16.o
 obj-$(CONFIG_SOUND_PSS)		+= pss.o ad1848.o mpu401.o
 obj-$(CONFIG_SOUND_TRIX)	+= trix.o ad1848.o sb_lib.o uart401.o
-obj-$(CONFIG_SOUND_SSCAPE)	+= sscape.o ad1848.o mpu401.o
 obj-$(CONFIG_SOUND_MSS)		+= ad1848.o
 obj-$(CONFIG_SOUND_PAS)		+= pas2.o sb.o sb_lib.o uart401.o
 obj-$(CONFIG_SOUND_SB)		+= sb.o sb_lib.o uart401.o
diff --git a/sound/oss/audio.c b/sound/oss/audio.c
index b69c05b..7df48a2 100644
--- a/sound/oss/audio.c
+++ b/sound/oss/audio.c
@@ -838,7 +838,7 @@
 					if ((err = audio_devs[dev]->d->prepare_for_input(dev,
 						     dmap_in->fragment_size, dmap_in->nbufs)) < 0) {
 						spin_unlock_irqrestore(&dmap_in->lock,flags);
-						return -err;
+						return err;
 					}
 					dmap_in->dma_mode = DMODE_INPUT;
 					audio_devs[dev]->enable_bits |= PCM_ENABLE_INPUT;
diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c
index 9e45098..3bc7104 100644
--- a/sound/oss/midi_synth.c
+++ b/sound/oss/midi_synth.c
@@ -426,7 +426,7 @@
 	int             err;
 	struct midi_input_info *inc;
 
-	if (orig_dev < 0 || orig_dev > num_midis || midi_devs[orig_dev] == NULL)
+	if (orig_dev < 0 || orig_dev >= num_midis || midi_devs[orig_dev] == NULL)
 		return -ENXIO;
 
 	midi2synth[orig_dev] = dev;
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 734b8f9..0af9d24 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -770,7 +770,7 @@
 
 	midi_dev = synth_devs[dev]->midi_dev;
 
-	if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL)
+	if (midi_dev < 0 || midi_dev >= num_midis || midi_devs[midi_dev] == NULL)
 		return -ENXIO;
 
 	devc = &dev_conf[midi_dev];
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index b2ed875..4153752 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -164,9 +164,6 @@
 	int free;
 	int nbytes;
 
-	if (count < 0)
-		return -EINVAL;
-
 	if (!count) {
 		dac_audio_sync();
 		return 0;
diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c
deleted file mode 100644
index 30c36d1..0000000
--- a/sound/oss/sscape.c
+++ /dev/null
@@ -1,1480 +0,0 @@
-/*
- * sound/oss/sscape.c
- *
- * Low level driver for Ensoniq SoundScape
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer   	: ioctl code reworked (vmalloc/vfree removed)
- * Sergey Smitienko	: ensoniq p'n'p support
- * Christoph Hellwig	: adapted to module_init/module_exit
- * Bartlomiej Zolnierkiewicz : added __init to attach_sscape()
- * Chris Rankin		: Specify that this module owns the coprocessor
- * Arnaldo C. de Melo	: added missing restore_flags in sscape_pnp_upload_file
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "sound_config.h"
-#include "sound_firmware.h"
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/fcntl.h>
-#include <linux/ctype.h>
-#include <linux/stddef.h>
-#include <linux/kmod.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-
-#include "coproc.h"
-
-#include "ad1848.h"
-#include "mpu401.h"
-
-/*
- *    I/O ports
- */
-#define MIDI_DATA       0
-#define MIDI_CTRL       1
-#define HOST_CTRL       2
-#define TX_READY	0x02
-#define RX_READY	0x01
-#define HOST_DATA       3
-#define ODIE_ADDR       4
-#define ODIE_DATA       5
-
-/*
- *    Indirect registers
- */
-
-#define GA_INTSTAT_REG	0
-#define GA_INTENA_REG	1
-#define GA_DMAA_REG	2
-#define GA_DMAB_REG	3
-#define GA_INTCFG_REG	4
-#define GA_DMACFG_REG	5
-#define GA_CDCFG_REG	6
-#define GA_SMCFGA_REG	7
-#define GA_SMCFGB_REG	8
-#define GA_HMCTL_REG	9
-
-/*
- * DMA channel identifiers (A and B)
- */
-
-#define SSCAPE_DMA_A	0
-#define SSCAPE_DMA_B	1
-
-#define PORT(name)	(devc->base+name)
-
-/*
- * Host commands recognized by the OBP microcode
- */
- 
-#define CMD_GEN_HOST_ACK	0x80
-#define CMD_GEN_MPU_ACK		0x81
-#define CMD_GET_BOARD_TYPE	0x82
-#define CMD_SET_CONTROL		0x88	/* Old firmware only */
-#define CMD_GET_CONTROL		0x89	/* Old firmware only */
-#define CTL_MASTER_VOL		0
-#define CTL_MIC_MODE		2
-#define CTL_SYNTH_VOL		4
-#define CTL_WAVE_VOL		7
-#define CMD_SET_EXTMIDI		0x8a
-#define CMD_GET_EXTMIDI		0x8b
-#define CMD_SET_MT32		0x8c
-#define CMD_GET_MT32		0x8d
-
-#define CMD_ACK			0x80
-
-#define	IC_ODIE			1
-#define	IC_OPUS			2
-
-typedef struct sscape_info
-{
-	int	base, irq, dma;
-	
-	int	codec, codec_irq;	/* required to setup pnp cards*/
-	int	codec_type;
-	int	ic_type;
-	char*	raw_buf;
-	unsigned long	raw_buf_phys;
-	int	buffsize;		/* -------------------------- */
-	spinlock_t lock;
-	int	ok;	/* Properly detected */
-	int	failed;
-	int	dma_allocated;
-	int	codec_audiodev;
-	int	opened;
-	int	*osp;
-	int	my_audiodev;
-} sscape_info;
-
-static struct sscape_info adev_info = {
-	0
-};
-
-static struct sscape_info *devc = &adev_info;
-static int sscape_mididev = -1;
-
-/* Some older cards have assigned interrupt bits differently than new ones */
-static char valid_interrupts_old[] = {
-	9, 7, 5, 15
-};
-
-static char valid_interrupts_new[] = {
-	9, 5, 7, 10
-};
-
-static char *valid_interrupts = valid_interrupts_new;
-
-/*
- *	See the bottom of the driver. This can be set by spea =0/1.
- */
- 
-#ifdef REVEAL_SPEA
-static char old_hardware = 1;
-#else
-static char old_hardware;
-#endif
-
-static void sleep(unsigned howlong)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule_timeout(howlong);
-}
-
-static unsigned char sscape_read(struct sscape_info *devc, int reg)
-{
-	unsigned long flags;
-	unsigned char val;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	outb(reg, PORT(ODIE_ADDR));
-	val = inb(PORT(ODIE_DATA));
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return val;
-}
-
-static void __sscape_write(int reg, int data)
-{
-	outb(reg, PORT(ODIE_ADDR));
-	outb(data, PORT(ODIE_DATA));
-}
-
-static void sscape_write(struct sscape_info *devc, int reg, int data)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	__sscape_write(reg, data);
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg)
-{
-	unsigned char res;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	outb( reg, devc -> codec);
-	res = inb (devc -> codec + 1);
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return res;
-
-}
-
-static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data)
-{
-	unsigned long flags;
-	
-	spin_lock_irqsave(&devc->lock,flags);
-	outb( reg, devc -> codec);
-	outb( data, devc -> codec + 1);
-	spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void host_open(struct sscape_info *devc)
-{
-	outb((0x00), PORT(HOST_CTRL));	/* Put the board to the host mode */
-}
-
-static void host_close(struct sscape_info *devc)
-{
-	outb((0x03), PORT(HOST_CTRL));	/* Put the board to the MIDI mode */
-}
-
-static int host_write(struct sscape_info *devc, unsigned char *data, int count)
-{
-	unsigned long flags;
-	int i, timeout_val;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	/*
-	 * Send the command and data bytes
-	 */
-
-	for (i = 0; i < count; i++)
-	{
-		for (timeout_val = 10000; timeout_val > 0; timeout_val--)
-			if (inb(PORT(HOST_CTRL)) & TX_READY)
-				break;
-
-		if (timeout_val <= 0)
-		{
-				spin_unlock_irqrestore(&devc->lock,flags);
-			    return 0;
-		}
-		outb(data[i], PORT(HOST_DATA));
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return 1;
-}
-
-static int host_read(struct sscape_info *devc)
-{
-	unsigned long flags;
-	int timeout_val;
-	unsigned char data;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	/*
-	 * Read a byte
-	 */
-
-	for (timeout_val = 10000; timeout_val > 0; timeout_val--)
-		if (inb(PORT(HOST_CTRL)) & RX_READY)
-			break;
-
-	if (timeout_val <= 0)
-	{
-		spin_unlock_irqrestore(&devc->lock,flags);
-		return -1;
-	}
-	data = inb(PORT(HOST_DATA));
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return data;
-}
-
-#if 0 /* unused */
-static int host_command1(struct sscape_info *devc, int cmd)
-{
-	unsigned char buf[10];
-	buf[0] = (unsigned char) (cmd & 0xff);
-	return host_write(devc, buf, 1);
-}
-#endif /* unused */
-
-
-static int host_command2(struct sscape_info *devc, int cmd, int parm1)
-{
-	unsigned char buf[10];
-
-	buf[0] = (unsigned char) (cmd & 0xff);
-	buf[1] = (unsigned char) (parm1 & 0xff);
-
-	return host_write(devc, buf, 2);
-}
-
-static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2)
-{
-	unsigned char buf[10];
-
-	buf[0] = (unsigned char) (cmd & 0xff);
-	buf[1] = (unsigned char) (parm1 & 0xff);
-	buf[2] = (unsigned char) (parm2 & 0xff);
-	return host_write(devc, buf, 3);
-}
-
-static void set_mt32(struct sscape_info *devc, int value)
-{
-	host_open(devc);
-	host_command2(devc, CMD_SET_MT32, value ? 1 : 0);
-	if (host_read(devc) != CMD_ACK)
-	{
-		/* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */
-	}
-	host_close(devc);
-}
-
-static void set_control(struct sscape_info *devc, int ctrl, int value)
-{
-	host_open(devc);
-	host_command3(devc, CMD_SET_CONTROL, ctrl, value);
-	if (host_read(devc) != CMD_ACK)
-	{
-		/* printk( "SNDSCAPE: Setting control (%d) failed\n",  ctrl); */
-	}
-	host_close(devc);
-}
-
-static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode)
-{
-	unsigned char temp;
-
-	if (dma_chan != SSCAPE_DMA_A)
-	{
-		printk(KERN_WARNING "soundscape: Tried to use DMA channel  != A. Why?\n");
-		return;
-	}
-	audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE;
-	DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode);
-	audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE;
-
-	temp = devc->dma << 4;	/* Setup DMA channel select bits */
-	if (devc->dma <= 3)
-		temp |= 0x80;	/* 8 bit DMA channel */
-
-	temp |= 1;		/* Trigger DMA */
-	sscape_write(devc, GA_DMAA_REG, temp);
-	temp &= 0xfe;		/* Clear DMA trigger */
-	sscape_write(devc, GA_DMAA_REG, temp);
-}
-
-static int verify_mpu(struct sscape_info *devc)
-{
-	/*
-	 * The SoundScape board could be in three modes (MPU, 8250 and host).
-	 * If the card is not in the MPU mode, enabling the MPU driver will
-	 * cause infinite loop (the driver believes that there is always some
-	 * received data in the buffer.
-	 *
-	 * Detect this by looking if there are more than 10 received MIDI bytes
-	 * (0x00) in the buffer.
-	 */
-
-	int i;
-
-	for (i = 0; i < 10; i++)
-	{
-		if (inb(devc->base + HOST_CTRL) & 0x80)
-			return 1;
-
-		if (inb(devc->base) != 0x00)
-			return 1;
-	}
-	printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n");
-	return 0;
-}
-
-static int sscape_coproc_open(void *dev_info, int sub_device)
-{
-	if (sub_device == COPR_MIDI)
-	{
-		set_mt32(devc, 0);
-		if (!verify_mpu(devc))
-			return -EIO;
-	}
-	return 0;
-}
-
-static void sscape_coproc_close(void *dev_info, int sub_device)
-{
-	struct sscape_info *devc = dev_info;
-	unsigned long   flags;
-
-	spin_lock_irqsave(&devc->lock,flags);
-	if (devc->dma_allocated)
-	{
-		__sscape_write(GA_DMAA_REG, 0x20);	/* DMA channel disabled */
-		devc->dma_allocated = 0;
-	}
-	spin_unlock_irqrestore(&devc->lock,flags);
-	return;
-}
-
-static void sscape_coproc_reset(void *dev_info)
-{
-}
-
-static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag)
-{
-	unsigned long flags;
-	unsigned char temp;
-	volatile int done, timeout_val;
-	static unsigned char codec_dma_bits;
-
-	if (flag & CPF_FIRST)
-	{
-		/*
-		 * First block. Have to allocate DMA and to reset the board
-		 * before continuing.
-		 */
-
-		spin_lock_irqsave(&devc->lock,flags);
-		codec_dma_bits = sscape_read(devc, GA_CDCFG_REG);
-
-		if (devc->dma_allocated == 0)
-			devc->dma_allocated = 1;
-
-		spin_unlock_irqrestore(&devc->lock,flags);
-
-		sscape_write(devc, GA_HMCTL_REG, 
-			(temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f);	/*Reset */
-
-		for (timeout_val = 10000; timeout_val > 0; timeout_val--)
-			sscape_read(devc, GA_HMCTL_REG);	/* Delay */
-
-		/* Take board out of reset */
-		sscape_write(devc, GA_HMCTL_REG,
-			(temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80);
-	}
-	/*
-	 * Transfer one code block using DMA
-	 */
-	if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL)
-	{
-		printk(KERN_WARNING "soundscape: DMA buffer not available\n");
-		return 0;
-	}
-	memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size);
-
-	spin_lock_irqsave(&devc->lock,flags);
-	
-	/******** INTERRUPTS DISABLED NOW ********/
-	
-	do_dma(devc, SSCAPE_DMA_A,
-	       audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys,
-	       size, DMA_MODE_WRITE);
-
-	/*
-	 * Wait until transfer completes.
-	 */
-	
-	done = 0;
-	timeout_val = 30;
-	while (!done && timeout_val-- > 0)
-	{
-		int resid;
-
-		if (HZ / 50)
-			sleep(HZ / 50);
-		clear_dma_ff(devc->dma);
-		if ((resid = get_dma_residue(devc->dma)) == 0)
-			done = 1;
-	}
-
-	spin_unlock_irqrestore(&devc->lock,flags);
-	if (!done)
-		return 0;
-
-	if (flag & CPF_LAST)
-	{
-		/*
-		 * Take the board out of reset
-		 */
-		outb((0x00), PORT(HOST_CTRL));
-		outb((0x00), PORT(MIDI_CTRL));
-
-		temp = sscape_read(devc, GA_HMCTL_REG);
-		temp |= 0x40;
-		sscape_write(devc, GA_HMCTL_REG, temp);	/* Kickstart the board */
-
-		/*
-		 * Wait until the ODB wakes up
-		 */
-		spin_lock_irqsave(&devc->lock,flags);
-		done = 0;
-		timeout_val = 5 * HZ;
-		while (!done && timeout_val-- > 0)
-		{
-			unsigned char x;
-			
-			sleep(1);
-			x = inb(PORT(HOST_DATA));
-			if (x == 0xff || x == 0xfe)		/* OBP startup acknowledge */
-			{
-				DDB(printk("Soundscape: Acknowledge = %x\n", x));
-				done = 1;
-			}
-		}
-		sscape_write(devc, GA_CDCFG_REG, codec_dma_bits);
-
-		spin_unlock_irqrestore(&devc->lock,flags);
-		if (!done)
-		{
-			printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n");
-			return 0;
-		}
-		spin_lock_irqsave(&devc->lock,flags);
-		done = 0;
-		timeout_val = 5 * HZ;
-		while (!done && timeout_val-- > 0)
-		{
-			sleep(1);
-			if (inb(PORT(HOST_DATA)) == 0xfe)	/* Host startup acknowledge */
-				done = 1;
-		}
-		spin_unlock_irqrestore(&devc->lock,flags);
-		if (!done)
-		{
-			printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
-			return 0;
-		}
-		printk(KERN_INFO "SoundScape board initialized OK\n");
-		set_control(devc, CTL_MASTER_VOL, 100);
-		set_control(devc, CTL_SYNTH_VOL, 100);
-
-#ifdef SSCAPE_DEBUG3
-		/*
-		 * Temporary debugging aid. Print contents of the registers after
-		 * downloading the code.
-		 */
-		{
-			int i;
-
-			for (i = 0; i < 13; i++)
-				printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
-		}
-#endif
-
-	}
-	return 1;
-}
-
-static int download_boot_block(void *dev_info, copr_buffer * buf)
-{
-	if (buf->len <= 0 || buf->len > sizeof(buf->data))
-		return -EINVAL;
-
-	if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags))
-	{
-		printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local)
-{
-	copr_buffer *buf;
-	int err;
-
-	switch (cmd) 
-	{
-		case SNDCTL_COPR_RESET:
-			sscape_coproc_reset(dev_info);
-			return 0;
-
-		case SNDCTL_COPR_LOAD:
-			buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
-			if (buf == NULL)
-				return -ENOSPC;
-			if (copy_from_user(buf, arg, sizeof(copr_buffer))) 
-			{
-				vfree(buf);
-				return -EFAULT;
-			}
-			err = download_boot_block(dev_info, buf);
-			vfree(buf);
-			return err;
-		
-		default:
-			return -EINVAL;
-	}
-}
-
-static coproc_operations sscape_coproc_operations =
-{
-	"SoundScape M68K",
-	THIS_MODULE,
-	sscape_coproc_open,
-	sscape_coproc_close,
-	sscape_coproc_ioctl,
-	sscape_coproc_reset,
-	&adev_info
-};
-
-static struct resource *sscape_ports;
-static int sscape_is_pnp;
-
-static void __init attach_sscape(struct address_info *hw_config)
-{
-#ifndef SSCAPE_REGS
-	/*
-	 * Config register values for Spea/V7 Media FX and Ensoniq S-2000.
-	 * These values are card
-	 * dependent. If you have another SoundScape based card, you have to
-	 * find the correct values. Do the following:
-	 *  - Compile this driver with SSCAPE_DEBUG1 defined.
-	 *  - Shut down and power off your machine.
-	 *  - Boot with DOS so that the SSINIT.EXE program is run.
-	 *  - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed
-	 *    when detecting the SoundScape.
-	 *  - Modify the following list to use the values printed during boot.
-	 *    Undefine the SSCAPE_DEBUG1
-	 */
-#define SSCAPE_REGS { \
-/* I0 */	0x00, \
-/* I1 */	0xf0, /* Note! Ignored. Set always to 0xf0 */ \
-/* I2 */	0x20, /* Note! Ignored. Set always to 0x20 */ \
-/* I3 */	0x20, /* Note! Ignored. Set always to 0x20 */ \
-/* I4 */	0xf5, /* Ignored */ \
-/* I5 */	0x10, \
-/* I6 */	0x00, \
-/* I7 */	0x2e, /* I7 MEM config A. Likely to vary between models */ \
-/* I8 */	0x00, /* I8 MEM config B. Likely to vary between models */ \
-/* I9 */	0x40 /* Ignored */ \
-	}
-#endif
-
-	unsigned long   flags;
-	static unsigned char regs[10] = SSCAPE_REGS;
-
-	int i, irq_bits = 0xff;
-
-	if (old_hardware)
-	{
-		valid_interrupts = valid_interrupts_old;
-		conf_printf("Ensoniq SoundScape (old)", hw_config);
-	}
-	else
-		conf_printf("Ensoniq SoundScape", hw_config);
-
-	for (i = 0; i < 4; i++)
-	{
-		if (hw_config->irq == valid_interrupts[i])
-		{
-			irq_bits = i;
-			break;
-		}
-	}
-	if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff))
-	{
-		printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq);
-		release_region(devc->base, 2);
-		release_region(devc->base + 2, 6);
-		if (sscape_is_pnp)
-			release_region(devc->codec, 2);
-		return;
-	}
-	
-	if (!sscape_is_pnp) {
-	
-		spin_lock_irqsave(&devc->lock,flags);
-		/* Host interrupt enable */
-		sscape_write(devc, 1, 0xf0);	/* All interrupts enabled */
-		/* DMA A status/trigger register */
-		sscape_write(devc, 2, 0x20);	/* DMA channel disabled */
-		/* DMA B status/trigger register */
-		sscape_write(devc, 3, 0x20);	/* DMA channel disabled */
-		/* Host interrupt config reg */
-		sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits);
-		/* Don't destroy CD-ROM DMA config bits (0xc0) */
-		sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0));
-		/* CD-ROM config (WSS codec actually) */
-		sscape_write(devc, 6, regs[6]);
-		sscape_write(devc, 7, regs[7]);
-		sscape_write(devc, 8, regs[8]);
-		/* Master control reg. Don't modify CR-ROM bits. Disable SB emul */
-		sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08);
-		spin_unlock_irqrestore(&devc->lock,flags);
-	}
-#ifdef SSCAPE_DEBUG2
-	/*
-	 * Temporary debugging aid. Print contents of the registers after
-	 * changing them.
-	 */
-	{
-		int i;
-
-		for (i = 0; i < 13; i++)
-			printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
-	}
-#endif
-
-	if (probe_mpu401(hw_config, sscape_ports))
-		hw_config->always_detect = 1;
-	hw_config->name = "SoundScape";
-
-	hw_config->irq *= -1;	/* Negative value signals IRQ sharing */
-	attach_mpu401(hw_config, THIS_MODULE);
-	hw_config->irq *= -1;	/* Restore it */
-
-	if (hw_config->slots[1] != -1)	/* The MPU driver installed itself */
-	{
-		sscape_mididev = hw_config->slots[1];
-		midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations;
-	}
-	sscape_write(devc, GA_INTENA_REG, 0x80);	/* Master IRQ enable */
-	devc->ok = 1;
-	devc->failed = 0;
-}
-
-static int detect_ga(sscape_info * devc)
-{
-	unsigned char save;
-
-	DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base));
-
-	/*
-	 * First check that the address register of "ODIE" is
-	 * there and that it has exactly 4 writable bits.
-	 * First 4 bits
-	 */
-	
-	if ((save = inb(PORT(ODIE_ADDR))) & 0xf0)
-	{
-		DDB(printk("soundscape: Detect error A\n"));
-		return 0;
-	}
-	outb((0x00), PORT(ODIE_ADDR));
-	if (inb(PORT(ODIE_ADDR)) != 0x00)
-	{
-		DDB(printk("soundscape: Detect error B\n"));
-		return 0;
-	}
-	outb((0xff), PORT(ODIE_ADDR));
-	if (inb(PORT(ODIE_ADDR)) != 0x0f)
-	{
-		DDB(printk("soundscape: Detect error C\n"));
-		return 0;
-	}
-	outb((save), PORT(ODIE_ADDR));
-
-	/*
-	 * Now verify that some indirect registers return zero on some bits.
-	 * This may break the driver with some future revisions of "ODIE" but...
-	 */
-
-	if (sscape_read(devc, 0) & 0x0c)
-	{
-		DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0)));
-		return 0;
-	}
-	if (sscape_read(devc, 1) & 0x0f)
-	{
-		DDB(printk("soundscape: Detect error E\n"));
-		return 0;
-	}
-	if (sscape_read(devc, 5) & 0x0f)
-	{
-		DDB(printk("soundscape: Detect error F\n"));
-		return 0;
-	}
-	return 1;
-}
-
-static	int sscape_read_host_ctrl(sscape_info* devc)
-{
-	return host_read(devc);
-}
-
-static	void sscape_write_host_ctrl2(sscape_info *devc, int a, int b)
-{
-	host_command2(devc, a, b);
-}
-
-static int sscape_alloc_dma(sscape_info *devc)
-{
-	char *start_addr, *end_addr;
-	int dma_pagesize;
-	int sz, size;
-	struct page *page;
-
-	if (devc->raw_buf != NULL) return 0;	/* Already done */
-	dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024);
-	devc->raw_buf = NULL;
-	devc->buffsize = 8192*4;
-	if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize;
-	start_addr = NULL;
-	/*
-	 * Now loop until we get a free buffer. Try to get smaller buffer if
-	 * it fails. Don't accept smaller than 8k buffer for performance
-	 * reasons.
-	 */
-	while (start_addr == NULL && devc->buffsize > PAGE_SIZE) {
-		for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
-		devc->buffsize = PAGE_SIZE * (1 << sz);
-		start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz);
-		if (start_addr == NULL) devc->buffsize /= 2;
-	}
-
-	if (start_addr == NULL) {
-		printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n");
-		return 0;
-	} else {
-		/* make some checks */
-		end_addr = start_addr + devc->buffsize - 1;		
-		/* now check if it fits into the same dma-pagesize */
-
-		if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1))
-		    || end_addr >= (char *) (MAX_DMA_ADDRESS)) {
-			printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize);
-			return 0;
-		}
-	}
-	devc->raw_buf = start_addr;
-	devc->raw_buf_phys = virt_to_bus(start_addr);
-
-	for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
-		SetPageReserved(page);
-	return 1;
-}
-
-static void sscape_free_dma(sscape_info *devc)
-{
-	int sz, size;
-	unsigned long start_addr, end_addr;
-	struct page *page;
-
-	if (devc->raw_buf == NULL) return;
-	for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
-	start_addr = (unsigned long) devc->raw_buf;
-	end_addr = start_addr + devc->buffsize;
-
-	for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
-		ClearPageReserved(page);
-
-	free_pages((unsigned long) devc->raw_buf, sz);
-	devc->raw_buf = NULL;
-}
-
-/* Intel version !!!!!!!!! */
-
-static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode)
-{
-	unsigned long flags;
-
-	flags = claim_dma_lock();
-	disable_dma(chan);
-	clear_dma_ff(chan);
-	set_dma_mode(chan, dma_mode);
-	set_dma_addr(chan, physaddr);
-	set_dma_count(chan, count);
-	enable_dma(chan);
-	release_dma_lock(flags);
-	return 0;
-}
-
-static void sscape_pnp_start_dma(sscape_info* devc, int arg )
-{
-	int reg;
-	if (arg == 0) reg = 2;
-	else reg = 3;
-
-	sscape_write(devc, reg, sscape_read( devc, reg) | 0x01);
-	sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE);
-}
-
-static int sscape_pnp_wait_dma (sscape_info* devc, int arg )
-{
-	int		reg;
-	unsigned long	i;
-	unsigned char	d;
-
-	if (arg == 0) reg = 2;
-	else reg = 3;
-
-	sleep ( 1 );
-	i = 0;
-	do {
-		d = sscape_read(devc, reg) & 1;
-		if ( d == 1)  break;
-		i++;
-	} while (i < 500000);
-	d = sscape_read(devc, reg) & 1; 
-	return d;
-}
-
-static	int	sscape_pnp_alloc_dma(sscape_info* devc)
-{
-	/* printk(KERN_INFO "sscape: requesting dma\n"); */
-	if (request_dma(devc -> dma, "sscape")) return 0;
-	/* printk(KERN_INFO "sscape: dma channel allocated\n"); */
-	if (!sscape_alloc_dma(devc)) {
-		free_dma(devc -> dma);
-		return 0;
-	};
-	return 1;
-}
-
-static	void	sscape_pnp_free_dma(sscape_info* devc)
-{
-	sscape_free_dma( devc);
-	free_dma(devc -> dma );	
-	/* printk(KERN_INFO "sscape: dma released\n"); */
-}
-
-static	int	sscape_pnp_upload_file(sscape_info* devc, char* fn)
-{	
-	int	     	done = 0;
-	int	     	timeout_val;
-	char*	     	data,*dt;
-	int	     	len,l;
-	unsigned long	flags;
-
-	sscape_write( devc, 9, sscape_read(devc, 9 )  & 0x3F );
-	sscape_write( devc, 2, (devc -> dma << 4) | 0x80 );
-	sscape_write( devc, 3, 0x20 );
-	sscape_write( devc, 9, sscape_read( devc, 9 )  | 0x80 );
-	
-	len = mod_firmware_load(fn, &data);
-	if (len == 0) {
-		    printk(KERN_ERR "sscape: file not found: %s\n", fn);
-		    return 0;
-	}
-	dt = data;
-	spin_lock_irqsave(&devc->lock,flags);
-	while ( len > 0 ) {
-		if (len > devc -> buffsize) l = devc->buffsize;
-		else l = len;
-		len -= l;		
-		memcpy(devc->raw_buf, dt, l); dt += l;
-		sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48);
-		sscape_pnp_start_dma ( devc, 0 );
-		if (sscape_pnp_wait_dma ( devc, 0 ) == 0) {
-			spin_unlock_irqrestore(&devc->lock,flags);
-			return 0;
-		}
-	}
-	
-	spin_unlock_irqrestore(&devc->lock,flags);
-	vfree(data);
-	
-	outb(0, devc -> base + 2);
-	outb(0, devc -> base);
-
-	sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40);
-
-	timeout_val = 5 * HZ; 
-	while (!done && timeout_val-- > 0)
-	{
-		unsigned char x;
-		sleep(1);
-		x = inb( devc -> base + 3);
-		if (x == 0xff || x == 0xfe)		/* OBP startup acknowledge */
-		{
-			//printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
-			done = 1;
-		}
-	}
-	timeout_val = 5 * HZ;
-	done = 0;
-	while (!done && timeout_val-- > 0)
-	{
-		unsigned char x;
-		sleep(1);
-		x = inb( devc -> base + 3);
-		if (x == 0xfe)		/* OBP startup acknowledge */
-		{
-			//printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
-			done = 1;
-		}
-	}
-
-	if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
-
-	sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
-	sscape_write( devc, 3, (devc -> dma << 4) + 0x80);
-	return 1;
-}
-
-static void __init sscape_pnp_init_hw(sscape_info* devc)
-{	
-	unsigned char midi_irq = 0, sb_irq = 0;
-	unsigned i;
-	static	char code_file_name[23] = "/sndscape/sndscape.cox";
-	
-	int sscape_joystic_enable	= 0x7f;
-	int sscape_mic_enable		= 0;
-	int sscape_ext_midi		= 0;		
-
-	if ( !sscape_pnp_alloc_dma(devc) ) {
-		printk(KERN_ERR "sscape: faild to allocate dma\n");
-		return;
-	}
-
-	for (i = 0; i < 4; i++) {
-		if ( devc -> irq   == valid_interrupts[i] ) 
-			midi_irq = i;
-		if ( devc -> codec_irq == valid_interrupts[i] ) 
-			sb_irq = i;
-	}
-
-	sscape_write( devc, 5, 0x50);
-	sscape_write( devc, 7, 0x2e);
-	sscape_write( devc, 8, 0x00);
-
-	sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
-	sscape_write( devc, 3, ( devc -> dma << 4) | 0x80);
-
-	sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq);
-
-	i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0);
-	if (sscape_joystic_enable) i |= 8;
-	
-	sscape_write (devc, 9, i);
-	sscape_write (devc, 6, 0x80);
-	sscape_write (devc, 1, 0x80);
-
-	if (devc -> codec_type == 2) {
-		sscape_pnp_write_codec( devc, 0x0C, 0x50);
-		sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F);
-		sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0);
-		sscape_pnp_write_codec( devc, 29, 0x20);
-	}
-
-	if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) {
-		printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n");
-		sscape_pnp_free_dma(devc);
-		return;
-	}
-
-	i = sscape_read_host_ctrl( devc );
-	
-	if ( (i & 0x0F) >  7 ) {
-		printk(KERN_ERR "sscape: scope.cod faild\n");
-		sscape_pnp_free_dma(devc);
-		return;
-	}
-	if ( i & 0x10 ) sscape_write( devc, 7, 0x2F);
-	code_file_name[21] = (char) ( i & 0x0F) + 0x30;
-	if (sscape_pnp_upload_file( devc, code_file_name) == 0) {
-		printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name);
-		sscape_pnp_free_dma(devc);
-		return;
-	}
-	
-	if (devc->ic_type != IC_ODIE) {
-		sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) |
-		 ( sscape_mic_enable == 0 ? 0x00 : 0x80) );
-	}
-	sscape_write_host_ctrl2( devc, 0x84, 0x64 );  /* MIDI volume */
-	sscape_write_host_ctrl2( devc, 0x86, 0x64 );  /* MIDI volume?? */
-	sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi);
-
-	sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL
-	sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL
-	sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL
-	sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR
-
-	if (devc -> codec_type == 1) {
-		sscape_pnp_write_codec ( devc, 4, 0x1F );
-		sscape_pnp_write_codec ( devc, 5, 0x1F );
-		sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable);
-	} else {
-		int t;
-		sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1);
-		sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1));
-
-		t = sscape_pnp_read_codec( devc, 0x00) & 0xDF;
-		if ( (sscape_mic_enable == 0)) t |= 0;
-		else t |= 0x20;
-		sscape_pnp_write_codec ( devc, 0x00, t);
-		t = sscape_pnp_read_codec( devc, 0x01) & 0xDF;
-		if ( (sscape_mic_enable == 0) ) t |= 0;
-		else t |= 0x20;
-		sscape_pnp_write_codec ( devc, 0x01, t);
-		sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20);
-		outb(0, devc -> codec);
-	}
-	if (devc -> ic_type == IC_OPUS ) {
-		int i = sscape_read( devc, 9 );
-		sscape_write( devc, 9, i | 3 );
-		sscape_write( devc, 3, 0x40);
-
-		if (request_region(0x228, 1, "sscape setup junk")) {
-			outb(0, 0x228);
-			release_region(0x228,1);
-		}
-		sscape_write( devc, 3, (devc -> dma << 4) | 0x80);
-		sscape_write( devc, 9, i );
-	}
-	
-	host_close ( devc );
-	sscape_pnp_free_dma(devc);
-}
-
-static int __init detect_sscape_pnp(sscape_info* devc)
-{
-	long	 i, irq_bits = 0xff;
-	unsigned int d;
-
-	DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base));
-
-	if (!request_region(devc->codec, 2, "sscape codec")) {
-		printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec);	
-		return 0;
-	}
-
-	if ((inb(devc->base + 2) & 0x78) != 0)
-		goto fail;
-
-	d = inb ( devc -> base + 4) & 0xF0;
-	if (d & 0x80)
-		goto fail;
-	
-	if (d == 0) {
-		devc->codec_type = 1;
-		devc->ic_type = IC_ODIE;
-	} else if ( (d & 0x60) != 0) {
-		devc->codec_type = 2;
-		devc->ic_type = IC_OPUS;
-	} else if ( (d & 0x40) != 0) {	/* WTF? */
-		devc->codec_type = 2;
-		devc->ic_type = IC_ODIE;
-	} else
-		goto fail;
-	
-	sscape_is_pnp = 1;
-		
-	outb(0xFA, devc -> base+4);
-	if  ((inb( devc -> base+4) & 0x9F) != 0x0A)
-		goto fail;
-	outb(0xFE, devc -> base+4);
-	if  ( (inb(devc -> base+4) & 0x9F) != 0x0E)
-		goto fail;
-	if  ( (inb(devc -> base+5) & 0x9F) != 0x0E)
-		goto fail;
-
-	if (devc->codec_type == 2) {
-		if (devc->codec != devc->base + 8) {
-			printk("soundscape warning: incorrect codec port specified\n");
-			goto fail;
-		}
-		d = 0x10 | (sscape_read(devc, 9)  & 0xCF);
-		sscape_write(devc, 9, d);
-		sscape_write(devc, 6, 0x80);
-	} else {
-		//todo: check codec is not base + 8
-	}
-
-	d  = (sscape_read(devc, 9) & 0x3F) | 0xC0;
-	sscape_write(devc, 9, d);
-
-	for (i = 0; i < 550000; i++)
-		if ( !(inb(devc -> codec) & 0x80) ) break;
-
-	d = inb(devc -> codec);
-	if (d & 0x80)
-		goto fail;
-	if ( inb(devc -> codec + 2) == 0xFF)
-		goto fail;
-
-	sscape_write(devc, 9, sscape_read(devc, 9)  & 0x3F );
-
-	d  = inb(devc -> codec) & 0x80;
-	if ( d == 0) {
-		printk(KERN_INFO "soundscape: hardware detected\n");
-		valid_interrupts = valid_interrupts_new;
-	} else	{
-		printk(KERN_INFO "soundscape: board looks like media fx\n");
-		valid_interrupts = valid_interrupts_old;
-		old_hardware = 1;
-	}
-
-	sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9)  & 0x3F) );
-
-	for (i = 0; i < 550000; i++)
-		if ( !(inb(devc -> codec) & 0x80)) 
-			break;
-		
-	sscape_pnp_init_hw(devc);
-
-	for (i = 0; i < 4; i++)
-	{
-		if (devc->codec_irq == valid_interrupts[i]) {
-			irq_bits = i;
-			break;
-		}
-	}	
-	sscape_write(devc, GA_INTENA_REG, 0x00);
-	sscape_write(devc, GA_DMACFG_REG, 0x50);
-	sscape_write(devc, GA_DMAA_REG, 0x70);
-	sscape_write(devc, GA_DMAB_REG, 0x20);
-	sscape_write(devc, GA_INTCFG_REG, 0xf0);
-	sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1));
-
-	sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20);
-	sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20);
-
-	return 1;
-fail:
-	release_region(devc->codec, 2);
-	return 0;
-}
-
-static int __init probe_sscape(struct address_info *hw_config)
-{
-	devc->base = hw_config->io_base;
-	devc->irq = hw_config->irq;
-	devc->dma = hw_config->dma;
-	devc->osp = hw_config->osp;
-
-#ifdef SSCAPE_DEBUG1
-	/*
-	 * Temporary debugging aid. Print contents of the registers before
-	 * changing them.
-	 */
-	{
-		int i;
-
-		for (i = 0; i < 13; i++)
-			printk("I%d = %02x (old value)\n", i, sscape_read(devc, i));
-	}
-#endif
-	devc->failed = 1;
-
-	sscape_ports = request_region(devc->base, 2, "mpu401");
-	if (!sscape_ports)
-		return 0;
-
-	if (!request_region(devc->base + 2, 6, "SoundScape")) {
-		release_region(devc->base, 2);
-		return 0;
-	}
-
-	if (!detect_ga(devc)) {
-		if (detect_sscape_pnp(devc))
-			return 1;
-		release_region(devc->base, 2);
-		release_region(devc->base + 2, 6);
-		return 0;
-	}
-
-	if (old_hardware)	/* Check that it's really an old Spea/Reveal card. */
-	{
-		unsigned char   tmp;
-		int             cc;
-
-		if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0))
-		{
-			sscape_write(devc, GA_HMCTL_REG, tmp | 0x80);
-			for (cc = 0; cc < 200000; ++cc)
-				inb(devc->base + ODIE_ADDR);
-		}
-	}
-	return 1;
-}
-
-static int __init init_ss_ms_sound(struct address_info *hw_config)
-{
-	int i, irq_bits = 0xff;
-	int ad_flags = 0;
-	struct resource *ports;
-	
-	if (devc->failed)
-	{
-		printk(KERN_ERR "soundscape: Card not detected\n");
-		return 0;
-	}
-	if (devc->ok == 0)
-	{
-		printk(KERN_ERR "soundscape: Invalid initialization order.\n");
-		return 0;
-	}
-	for (i = 0; i < 4; i++)
-	{
-		if (hw_config->irq == valid_interrupts[i])
-		{
-			irq_bits = i;
-			break;
-		}
-	}
-	if (irq_bits == 0xff) {
-		printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq);
-		return 0;
-	}
-	
-	if (old_hardware)
-		ad_flags = 0x12345677;	/* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */
-	else if (sscape_is_pnp)
-		ad_flags = 0x87654321;  /* Tell that we have a soundscape pnp with 1845 chip */
-
-	ports = request_region(hw_config->io_base, 4, "ad1848");
-	if (!ports) {
-		printk(KERN_ERR "soundscape: ports busy\n");
-		return 0;
-	}
-
-	if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) {
-		release_region(hw_config->io_base, 4);
-		return 0;
-	}
-
- 	if (!sscape_is_pnp)  /*pnp is already setup*/
- 	{
- 		/*
-     		 * Setup the DMA polarity.
- 	    	 */
- 		sscape_write(devc, GA_DMACFG_REG, 0x50);
- 	
- 		/*
- 		 * Take the gate-array off of the DMA channel.
- 		 */
- 		sscape_write(devc, GA_DMAB_REG, 0x20);
- 	
- 		/*
- 		 * Init the AD1848 (CD-ROM) config reg.
- 		 */
- 		sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1));
- 	}
- 	
- 	if (hw_config->irq == devc->irq)
- 		printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n");
- 				
-	hw_config->slots[0] = ad1848_init(
-			sscape_is_pnp ? "SoundScape" : "SoundScape PNP",
-			ports,
-			hw_config->irq,
-			hw_config->dma,
-			hw_config->dma,
-			0,
-			devc->osp,
-			THIS_MODULE);
-
- 					  
-	if (hw_config->slots[0] != -1)	/* The AD1848 driver installed itself */
-	{
-		audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations;
-		devc->codec_audiodev = hw_config->slots[0];
-		devc->my_audiodev = hw_config->slots[0];
-
-		/* Set proper routings here (what are they) */
-		AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
-	}
-		
-#ifdef SSCAPE_DEBUG5
-	/*
-	 * Temporary debugging aid. Print contents of the registers
-	 * after the AD1848 device has been initialized.
-	 */
-	{
-		int i;
-
-		for (i = 0; i < 13; i++)
-			printk("I%d = %02x\n", i, sscape_read(devc, i));
-	}
-#endif
-	return 1;
-}
-
-static void __exit unload_sscape(struct address_info *hw_config)
-{
-	release_region(devc->base + 2, 6);
-	unload_mpu401(hw_config);
-	if (sscape_is_pnp)
-		release_region(devc->codec, 2);
-}
-
-static void __exit unload_ss_ms_sound(struct address_info *hw_config)
-{
-	ad1848_unload(hw_config->io_base,
-		      hw_config->irq,
-		      devc->dma,
-		      devc->dma,
-		      0);
-	sound_unload_audiodev(hw_config->slots[0]);
-}
-
-static struct address_info cfg;
-static struct address_info cfg_mpu;
-
-static int __initdata spea = -1;
-static int mss = 0;
-static int __initdata dma = -1;
-static int __initdata irq = -1;
-static int __initdata io = -1;
-static int __initdata mpu_irq = -1;
-static int __initdata mpu_io = -1;
-
-module_param(dma, int, 0);
-module_param(irq, int, 0);
-module_param(io, int, 0);
-module_param(spea, int, 0);		/* spea=0/1 set the old_hardware */
-module_param(mpu_irq, int, 0);
-module_param(mpu_io, int, 0);
-module_param(mss, int, 0);
-
-static int __init init_sscape(void)
-{
-	printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-	
-	cfg.irq = irq;
-	cfg.dma = dma;
-	cfg.io_base = io;
-
-	cfg_mpu.irq = mpu_irq;
-	cfg_mpu.io_base = mpu_io;
-	/* WEH - Try to get right dma channel */
-        cfg_mpu.dma = dma;
-	
-	devc->codec = cfg.io_base;
-	devc->codec_irq = cfg.irq;
-	devc->codec_type = 0;
-	devc->ic_type = 0;
-	devc->raw_buf = NULL;
-	spin_lock_init(&devc->lock);
-
-	if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) {
-		printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n");
-		return -EINVAL;
-	}
-	
-	if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) {
-		printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n");
-		return -EINVAL;
-	}
-	
-	if(spea != -1) {
-		old_hardware = spea;
-		printk(KERN_INFO "Forcing %s hardware support.\n",
-			spea?"new":"old");
-	}	
-	if (probe_sscape(&cfg_mpu) == 0)
-		return -ENODEV;
-
-	attach_sscape(&cfg_mpu);
-	
-	mss = init_ss_ms_sound(&cfg);
-
-	return 0;
-}
-
-static void __exit cleanup_sscape(void)
-{
-	if (mss)
-		unload_ss_ms_sound(&cfg);
-	unload_sscape(&cfg_mpu);
-}
-
-module_init(init_sscape);
-module_exit(cleanup_sscape);
-
-#ifndef MODULE
-static int __init setup_sscape(char *str)
-{
-	/* io, irq, dma, mpu_io, mpu_irq */
-	int ints[6];
-	
-	str = get_options(str, ARRAY_SIZE(ints), ints);
-	
-	io	= ints[1];
-	irq	= ints[2];
-	dma	= ints[3];
-	mpu_io	= ints[4];
-	mpu_irq	= ints[5];
-
-	return 1;
-}
-
-__setup("sscape=", setup_sscape);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 75c602b..351654c 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -570,6 +570,7 @@
 	tristate "ICEnsemble ICE1712 (Envy24)"
 	select SND_MPU401_UART
 	select SND_AC97_CODEC
+	select BITREVERSE
 	help
 	  Say Y here to include support for soundcards based on the
 	  ICE1712 (Envy24) chip.
diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c
index 78288db..20cb60a 100644
--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -603,8 +603,8 @@
 };
 
 static const struct snd_kcontrol_new snd_ac97_controls_pc_beep[2] = {
-AC97_SINGLE("PC Speaker Playback Switch", AC97_PC_BEEP, 15, 1, 1),
-AC97_SINGLE("PC Speaker Playback Volume", AC97_PC_BEEP, 1, 15, 1)
+AC97_SINGLE("Beep Playback Switch", AC97_PC_BEEP, 15, 1, 1),
+AC97_SINGLE("Beep Playback Volume", AC97_PC_BEEP, 1, 15, 1)
 };
 
 static const struct snd_kcontrol_new snd_ac97_controls_mic_boost =
@@ -1393,7 +1393,7 @@
 		}
 	}
 	
-	/* build PC Speaker controls */
+	/* build Beep controls */
 	if (!(ac97->flags & AC97_HAS_NO_PC_BEEP) && 
 		((ac97->flags & AC97_HAS_PC_BEEP) ||
 	    snd_ac97_try_volume_mix(ac97, AC97_PC_BEEP))) {
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 7337abd..139cf3b 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -800,12 +800,12 @@
 AC97_SINGLE("Mono ZC Switch", AC97_MASTER_TONE, 6, 1, 0),
 AC97_SINGLE("Mono Volume", AC97_MASTER_TONE, 0, 31, 1),
 
-AC97_SINGLE("PC Beep to Headphone Switch", AC97_AUX, 15, 1, 1),
-AC97_SINGLE("PC Beep to Headphone Volume", AC97_AUX, 12, 7, 1),
-AC97_SINGLE("PC Beep to Master Switch", AC97_AUX, 11, 1, 1),
-AC97_SINGLE("PC Beep to Master Volume", AC97_AUX, 8, 7, 1),
-AC97_SINGLE("PC Beep to Mono Switch", AC97_AUX, 7, 1, 1),
-AC97_SINGLE("PC Beep to Mono Volume", AC97_AUX, 4, 7, 1),
+AC97_SINGLE("Beep to Headphone Switch", AC97_AUX, 15, 1, 1),
+AC97_SINGLE("Beep to Headphone Volume", AC97_AUX, 12, 7, 1),
+AC97_SINGLE("Beep to Master Switch", AC97_AUX, 11, 1, 1),
+AC97_SINGLE("Beep to Master Volume", AC97_AUX, 8, 7, 1),
+AC97_SINGLE("Beep to Mono Switch", AC97_AUX, 7, 1, 1),
+AC97_SINGLE("Beep to Mono Volume", AC97_AUX, 4, 7, 1),
 
 AC97_SINGLE("Voice to Headphone Switch", AC97_PCM, 15, 1, 1),
 AC97_SINGLE("Voice to Headphone Volume", AC97_PCM, 12, 7, 1),
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 8451a01..69867ac 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -830,8 +830,8 @@
 	AZF3328_MIXER_SWITCH("Mic Boost (+20dB)", IDX_MIXER_MIC, 6, 0),
 	AZF3328_MIXER_SWITCH("Line Playback Switch", IDX_MIXER_LINEIN, 15, 1),
 	AZF3328_MIXER_VOL_STEREO("Line Playback Volume", IDX_MIXER_LINEIN, 0x1f, 1),
-	AZF3328_MIXER_SWITCH("PC Speaker Playback Switch", IDX_MIXER_PCBEEP, 15, 1),
-	AZF3328_MIXER_VOL_SPECIAL("PC Speaker Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1),
+	AZF3328_MIXER_SWITCH("Beep Playback Switch", IDX_MIXER_PCBEEP, 15, 1),
+	AZF3328_MIXER_VOL_SPECIAL("Beep Playback Volume", IDX_MIXER_PCBEEP, 0x0f, 1, 1),
 	AZF3328_MIXER_SWITCH("Video Playback Switch", IDX_MIXER_VIDEO, 15, 1),
 	AZF3328_MIXER_VOL_STEREO("Video Playback Volume", IDX_MIXER_VIDEO, 0x1f, 1),
 	AZF3328_MIXER_SWITCH("Aux Playback Switch", IDX_MIXER_AUX, 15, 1),
diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c
index c8c6f43..8f443a9 100644
--- a/sound/pci/ca0106/ca0106_mixer.c
+++ b/sound/pci/ca0106/ca0106_mixer.c
@@ -792,8 +792,8 @@
 		"Phone Playback Volume",
 		"Video Playback Switch",
 		"Video Playback Volume",
-		"PC Speaker Playback Switch",
-		"PC Speaker Playback Volume",
+		"Beep Playback Switch",
+		"Beep Playback Volume",
 		"Mono Output Select",
 		"Capture Source",
 		"Capture Switch",
diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index c62b7d1..15523e6 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -304,7 +304,7 @@
         while (!snd_info_get_line(buffer, line, sizeof(line))) {
                 if (sscanf(line, "%x %x", &reg, &val) != 2)
                         continue;
-                if ((reg < 0x40) && (reg >=0) && (val <= 0xffffffff) ) {
+		if (reg < 0x40 && val <= 0xffffffff) {
 			spin_lock_irqsave(&emu->emu_lock, flags);
 			outl(val, emu->port + (reg & 0xfffffffc));
 			spin_unlock_irqrestore(&emu->emu_lock, flags);
@@ -405,7 +405,7 @@
         while (!snd_info_get_line(buffer, line, sizeof(line))) {
                 if (sscanf(line, "%x %x %x", &reg, &channel_id, &val) != 3)
                         continue;
-                if ((reg < 0x80) && (reg >=0) && (val <= 0xffffffff) && (channel_id >=0) && (channel_id <= 3) )
+		if (reg < 0x80 && val <= 0xffffffff && channel_id <= 3)
                         snd_ca0106_ptr_write(emu, reg, channel_id, val);
         }
 }
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index ddcd4a9..a312bae 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2302,7 +2302,7 @@
 	CMIPCI_SB_VOL_MONO("Mic Playback Volume", SB_DSP4_MIC_DEV, 3, 31),
 	CMIPCI_SB_SW_MONO("Mic Playback Switch", 0),
 	CMIPCI_DOUBLE("Mic Capture Switch", SB_DSP4_INPUT_LEFT, SB_DSP4_INPUT_RIGHT, 0, 0, 1, 0, 0),
-	CMIPCI_SB_VOL_MONO("PC Speaker Playback Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
+	CMIPCI_SB_VOL_MONO("Beep Playback Volume", SB_DSP4_SPEAKER_DEV, 6, 3),
 	CMIPCI_MIXER_VOL_STEREO("Aux Playback Volume", CM_REG_AUX_VOL, 4, 0, 15),
 	CMIPCI_MIXER_SW_STEREO("Aux Playback Switch", CM_REG_MIXER2, CM_VAUXLM_SHIFT, CM_VAUXRM_SHIFT, 0),
 	CMIPCI_MIXER_SW_STEREO("Aux Capture Switch", CM_REG_MIXER2, CM_RAUXLEN_SHIFT, CM_RAUXREN_SHIFT, 0),
@@ -2310,7 +2310,7 @@
 	CMIPCI_MIXER_VOL_MONO("Mic Capture Volume", CM_REG_MIXER2, CM_VADMIC_SHIFT, 7),
 	CMIPCI_SB_VOL_MONO("Phone Playback Volume", CM_REG_EXTENT_IND, 5, 7),
 	CMIPCI_DOUBLE("Phone Playback Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 4, 4, 1, 0, 0),
-	CMIPCI_DOUBLE("PC Speaker Playback Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 3, 3, 1, 0, 0),
+	CMIPCI_DOUBLE("Beep Playback Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 3, 3, 1, 0, 0),
 	CMIPCI_DOUBLE("Mic Boost Capture Switch", CM_REG_EXTENT_IND, CM_REG_EXTENT_IND, 0, 0, 1, 0, 0),
 };
 
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index 7545464..cb65bd0 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -240,7 +240,7 @@
 	} else if (pitch == 0x02000000) {
 		/* pitch == 2 */
 		return 3;
-	} else if (pitch >= 0x0 && pitch <= 0x08000000) {
+	} else if (pitch <= 0x08000000) {
 		/* 0 <= pitch <= 8 */
 		return 0;
 	} else {
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 36e08bd..6b8ae7b 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1040,8 +1040,7 @@
 		if (sscanf(line, "%x %x %x", &reg, &channel_id, &val) != 3)
 			continue;
 
-		if ((reg < 0x49) && (reg >= 0) && (val <= 0xffffffff) 
-		    && (channel_id >= 0) && (channel_id <= 2) )
+		if (reg < 0x49 && val <= 0xffffffff && channel_id <= 2)
 			snd_emu10k1x_ptr_write(emu, reg, channel_id, val);
 	}
 }
diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c
index b0fb6c9..05afe06 100644
--- a/sound/pci/emu10k1/emumixer.c
+++ b/sound/pci/emu10k1/emumixer.c
@@ -1818,8 +1818,8 @@
 		"Master Playback Switch", "Master Capture Switch",
 		"Master Playback Volume", "Master Capture Volume",
 		"Wave Master Playback Volume", "Master Playback Volume",
-		"PC Speaker Playback Switch", "PC Speaker Capture Switch",
-		"PC Speaker Playback Volume", "PC Speaker Capture Volume",
+		"Beep Playback Switch", "Beep Capture Switch",
+		"Beep Playback Volume", "Beep Capture Volume",
 		"Phone Playback Switch", "Phone Capture Switch",
 		"Phone Playback Volume", "Phone Capture Volume",
 		"Mic Playback Switch", "Mic Capture Switch",
diff --git a/sound/pci/emu10k1/emuproc.c b/sound/pci/emu10k1/emuproc.c
index 216f974..baa7cd5 100644
--- a/sound/pci/emu10k1/emuproc.c
+++ b/sound/pci/emu10k1/emuproc.c
@@ -451,7 +451,7 @@
 	while (!snd_info_get_line(buffer, line, sizeof(line))) {
 		if (sscanf(line, "%x %x", &reg, &val) != 2)
 			continue;
-		if ((reg < 0x40) && (reg >= 0) && (val <= 0xffffffff) ) {
+		if (reg < 0x40 && val <= 0xffffffff) {
 			spin_lock_irqsave(&emu->emu_lock, flags);
 			outl(val, emu->port + (reg & 0xfffffffc));
 			spin_unlock_irqrestore(&emu->emu_lock, flags);
@@ -527,7 +527,7 @@
 	while (!snd_info_get_line(buffer, line, sizeof(line))) {
 		if (sscanf(line, "%x %x %x", &reg, &channel_id, &val) != 3)
 			continue;
-		if ((reg < 0xa0) && (reg >= 0) && (val <= 0xffffffff) && (channel_id >= 0) && (channel_id <= 3) )
+		if (reg < 0xa0 && val <= 0xffffffff && channel_id <= 3)
 			snd_ptr_write(emu, iobase, reg, channel_id, val);
 	}
 }
diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index c1a5aa1..5ef7080 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -256,7 +256,7 @@
 	if (reg > 0x3f)
 		return 1;
 	reg += 0x40; /* 0x40 upwards are registers. */
-	if (value < 0 || value > 0x3f) /* 0 to 0x3f are values */
+	if (value > 0x3f) /* 0 to 0x3f are values */
 		return 1;
 	spin_lock_irqsave(&emu->emu_lock, flags);
 	outl(reg, emu->port + A_IOCFG);
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 820318e..fb83e1f 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -1387,7 +1387,7 @@
 		  db_scale_line),
 ES1938_DOUBLE_TLV("Capture Volume", 0, 0xb4, 0xb4, 4, 0, 15, 0,
 		  db_scale_capture),
-ES1938_SINGLE("PC Speaker Volume", 0, 0x3c, 0, 7, 0),
+ES1938_SINGLE("Beep Volume", 0, 0x3c, 0, 7, 0),
 ES1938_SINGLE("Record Monitor", 0, 0xa8, 3, 1, 0),
 ES1938_SINGLE("Capture Switch", 0, 0x1c, 4, 1, 1),
 {
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 60cdb9e..83508b3 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -55,7 +55,7 @@
  *    1 = MediaForte 256-PCS
  *    2 = MediaForte 256-PCPR
  *    3 = MediaForte 64-PCR
- *   16 = setup tuner only (this is additional bit), i.e. SF-64-PCR FM card
+ *   16 = setup tuner only (this is additional bit), i.e. SF64-PCR FM card
  *  High 16-bits are video (radio) device number + 1
  */
 static int tea575x_tuner[SNDRV_CARDS];
@@ -67,7 +67,10 @@
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable FM801 soundcard.");
 module_param_array(tea575x_tuner, int, NULL, 0444);
-MODULE_PARM_DESC(tea575x_tuner, "Enable TEA575x tuner.");
+MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (1 = SF256-PCS, 2=SF256-PCPR, 3=SF64-PCR, +16=tuner-only).");
+
+#define TUNER_ONLY		(1<<4)
+#define TUNER_TYPE_MASK		(~TUNER_ONLY & 0xFFFF)
 
 /*
  *  Direct registers
@@ -160,7 +163,7 @@
 	unsigned int multichannel: 1,	/* multichannel support */
 		     secondary: 1;	/* secondary codec */
 	unsigned char secondary_addr;	/* address of the secondary codec */
-	unsigned int tea575x_tuner;	/* tuner flags */
+	unsigned int tea575x_tuner;	/* tuner access method & flags */
 
 	unsigned short ply_ctrl; /* playback control */
 	unsigned short cap_ctrl; /* capture control */
@@ -1287,7 +1290,7 @@
 {
 	unsigned short cmdw;
 
-	if (chip->tea575x_tuner & 0x0010)
+	if (chip->tea575x_tuner & TUNER_ONLY)
 		goto __ac97_ok;
 
 	/* codec cold reset + AC'97 warm reset */
@@ -1296,11 +1299,13 @@
 	udelay(100);
 	outw(0, FM801_REG(chip, CODEC_CTRL));
 
-	if (wait_for_codec(chip, 0, AC97_RESET, msecs_to_jiffies(750)) < 0) {
-		snd_printk(KERN_ERR "Primary AC'97 codec not found\n");
-		if (! resume)
-			return -EIO;
-	}
+	if (wait_for_codec(chip, 0, AC97_RESET, msecs_to_jiffies(750)) < 0)
+		if (!resume) {
+			snd_printk(KERN_INFO "Primary AC'97 codec not found, "
+					    "assume SF64-PCR (tuner-only)\n");
+			chip->tea575x_tuner = 3 | TUNER_ONLY;
+			goto __ac97_ok;
+		}
 
 	if (chip->multichannel) {
 		if (chip->secondary_addr) {
@@ -1414,7 +1419,7 @@
 		return err;
 	}
 	chip->port = pci_resource_start(pci, 0);
-	if ((tea575x_tuner & 0x0010) == 0) {
+	if ((tea575x_tuner & TUNER_ONLY) == 0) {
 		if (request_irq(pci->irq, snd_fm801_interrupt, IRQF_SHARED,
 				"FM801", chip)) {
 			snd_printk(KERN_ERR "unable to grab IRQ %d\n", chip->irq);
@@ -1429,6 +1434,14 @@
 		chip->multichannel = 1;
 
 	snd_fm801_chip_init(chip, 0);
+	/* init might set tuner access method */
+	tea575x_tuner = chip->tea575x_tuner;
+
+	if (chip->irq >= 0 && (tea575x_tuner & TUNER_ONLY)) {
+		pci_clear_master(pci);
+		free_irq(chip->irq, chip);
+		chip->irq = -1;
+	}
 
 	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
 		snd_fm801_free(chip);
@@ -1438,12 +1451,13 @@
 	snd_card_set_dev(card, &pci->dev);
 
 #ifdef TEA575X_RADIO
-	if (tea575x_tuner > 0 && (tea575x_tuner & 0x000f) < 4) {
+	if ((tea575x_tuner & TUNER_TYPE_MASK) > 0 &&
+	    (tea575x_tuner & TUNER_TYPE_MASK) < 4) {
 		chip->tea.dev_nr = tea575x_tuner >> 16;
 		chip->tea.card = card;
 		chip->tea.freq_fixup = 10700;
 		chip->tea.private_data = chip;
-		chip->tea.ops = &snd_fm801_tea_ops[(tea575x_tuner & 0x000f) - 1];
+		chip->tea.ops = &snd_fm801_tea_ops[(tea575x_tuner & TUNER_TYPE_MASK) - 1];
 		snd_tea575x_init(&chip->tea);
 	}
 #endif
@@ -1483,7 +1497,7 @@
 	sprintf(card->longname, "%s at 0x%lx, irq %i",
 		card->shortname, chip->port, chip->irq);
 
-	if (tea575x_tuner[dev] & 0x0010)
+	if (chip->tea575x_tuner & TUNER_ONLY)
 		goto __fm801_tuner_only;
 
 	if ((err = snd_fm801_pcm(chip, 0, NULL)) < 0) {
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 55545e0..556cff9 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -38,9 +38,20 @@
 	  Say Y here to build a digital beep interface for HD-audio
 	  driver. This interface is used to generate digital beeps.
 
+config SND_HDA_INPUT_BEEP_MODE
+	int "Digital beep registration mode (0=off, 1=on, 2=mute sw on/off)"
+	depends on SND_HDA_INPUT_BEEP=y
+	default "1"
+	range 0 2
+	help
+	  Set 0 to disable the digital beep interface for HD-audio by default.
+	  Set 1 to always enable the digital beep interface for HD-audio by
+	  default. Set 2 to control the beep device registration to input
+	  layer using a "Beep Switch" in mixer applications.
+
 config SND_HDA_INPUT_JACK
 	bool "Support jack plugging notification via input layer"
-	depends on INPUT=y || INPUT=SND_HDA_INTEL
+	depends on INPUT=y || INPUT=SND
 	select SND_JACK
 	help
 	  Say Y here to enable the jack plugging notification via
diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index 3f51a98..5fe34a8 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -113,23 +113,25 @@
 	return 0;
 }
 
-int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
+static void snd_hda_do_detach(struct hda_beep *beep)
+{
+	input_unregister_device(beep->dev);
+	beep->dev = NULL;
+	cancel_work_sync(&beep->beep_work);
+	/* turn off beep for sure */
+	snd_hda_codec_write_cache(beep->codec, beep->nid, 0,
+				  AC_VERB_SET_BEEP_CONTROL, 0);
+}
+
+static int snd_hda_do_attach(struct hda_beep *beep)
 {
 	struct input_dev *input_dev;
-	struct hda_beep *beep;
+	struct hda_codec *codec = beep->codec;
 	int err;
 
-	if (!snd_hda_get_bool_hint(codec, "beep"))
-		return 0; /* disabled explicitly */
-
-	beep = kzalloc(sizeof(*beep), GFP_KERNEL);
-	if (beep == NULL)
-		return -ENOMEM;
-	snprintf(beep->phys, sizeof(beep->phys),
-		"card%d/codec#%d/beep0", codec->bus->card->number, codec->addr);
 	input_dev = input_allocate_device();
 	if (!input_dev) {
-		kfree(beep);
+		printk(KERN_INFO "hda_beep: unable to allocate input device\n");
 		return -ENOMEM;
 	}
 
@@ -151,21 +153,96 @@
 	err = input_register_device(input_dev);
 	if (err < 0) {
 		input_free_device(input_dev);
-		kfree(beep);
+		printk(KERN_INFO "hda_beep: unable to register input device\n");
 		return err;
 	}
+	beep->dev = input_dev;
+	return 0;
+}
 
+static void snd_hda_do_register(struct work_struct *work)
+{
+	struct hda_beep *beep =
+		container_of(work, struct hda_beep, register_work);
+
+	mutex_lock(&beep->mutex);
+	if (beep->enabled && !beep->dev)
+		snd_hda_do_attach(beep);
+	mutex_unlock(&beep->mutex);
+}
+
+static void snd_hda_do_unregister(struct work_struct *work)
+{
+	struct hda_beep *beep =
+		container_of(work, struct hda_beep, unregister_work.work);
+
+	mutex_lock(&beep->mutex);
+	if (!beep->enabled && beep->dev)
+		snd_hda_do_detach(beep);
+	mutex_unlock(&beep->mutex);
+}
+
+int snd_hda_enable_beep_device(struct hda_codec *codec, int enable)
+{
+	struct hda_beep *beep = codec->beep;
+	enable = !!enable;
+	if (beep == NULL)
+		return 0;
+	if (beep->enabled != enable) {
+		beep->enabled = enable;
+		if (!enable) {
+			/* turn off beep */
+			snd_hda_codec_write_cache(beep->codec, beep->nid, 0,
+						  AC_VERB_SET_BEEP_CONTROL, 0);
+		}
+		if (beep->mode == HDA_BEEP_MODE_SWREG) {
+			if (enable) {
+				cancel_delayed_work(&beep->unregister_work);
+				schedule_work(&beep->register_work);
+			} else {
+				schedule_delayed_work(&beep->unregister_work,
+									   HZ);
+			}
+		}
+		return 1;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_enable_beep_device);
+
+int snd_hda_attach_beep_device(struct hda_codec *codec, int nid)
+{
+	struct hda_beep *beep;
+
+	if (!snd_hda_get_bool_hint(codec, "beep"))
+		return 0; /* disabled explicitly by hints */
+	if (codec->beep_mode == HDA_BEEP_MODE_OFF)
+		return 0; /* disabled by module option */
+
+	beep = kzalloc(sizeof(*beep), GFP_KERNEL);
+	if (beep == NULL)
+		return -ENOMEM;
+	snprintf(beep->phys, sizeof(beep->phys),
+		"card%d/codec#%d/beep0", codec->bus->card->number, codec->addr);
 	/* enable linear scale */
 	snd_hda_codec_write(codec, nid, 0,
 		AC_VERB_SET_DIGI_CONVERT_2, 0x01);
 
 	beep->nid = nid;
-	beep->dev = input_dev;
 	beep->codec = codec;
-	beep->enabled = 1;
+	beep->mode = codec->beep_mode;
 	codec->beep = beep;
 
+	INIT_WORK(&beep->register_work, &snd_hda_do_register);
+	INIT_DELAYED_WORK(&beep->unregister_work, &snd_hda_do_unregister);
 	INIT_WORK(&beep->beep_work, &snd_hda_generate_beep);
+	mutex_init(&beep->mutex);
+
+	if (beep->mode == HDA_BEEP_MODE_ON) {
+		beep->enabled = 1;
+		snd_hda_do_register(&beep->register_work);
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_attach_beep_device);
@@ -174,11 +251,12 @@
 {
 	struct hda_beep *beep = codec->beep;
 	if (beep) {
-		cancel_work_sync(&beep->beep_work);
-
-		input_unregister_device(beep->dev);
-		kfree(beep);
+		cancel_work_sync(&beep->register_work);
+		cancel_delayed_work(&beep->unregister_work);
+		if (beep->enabled)
+			snd_hda_do_detach(beep);
 		codec->beep = NULL;
+		kfree(beep);
 	}
 }
 EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device);
diff --git a/sound/pci/hda/hda_beep.h b/sound/pci/hda/hda_beep.h
index 0c3de78..f1de1ba 100644
--- a/sound/pci/hda/hda_beep.h
+++ b/sound/pci/hda/hda_beep.h
@@ -24,19 +24,29 @@
 
 #include "hda_codec.h"
 
+#define HDA_BEEP_MODE_OFF	0
+#define HDA_BEEP_MODE_ON	1
+#define HDA_BEEP_MODE_SWREG	2
+
 /* beep information */
 struct hda_beep {
 	struct input_dev *dev;
 	struct hda_codec *codec;
+	unsigned int mode;
 	char phys[32];
 	int tone;
 	hda_nid_t nid;
 	unsigned int enabled:1;
+	unsigned int request_enable:1;
 	unsigned int linear_tone:1;	/* linear tone for IDT/STAC codec */
+	struct work_struct register_work; /* registration work */
+	struct delayed_work unregister_work; /* unregistration work */
 	struct work_struct beep_work; /* scheduled task for beep event */
+	struct mutex mutex;
 };
 
 #ifdef CONFIG_SND_HDA_INPUT_BEEP
+int snd_hda_enable_beep_device(struct hda_codec *codec, int enable);
 int snd_hda_attach_beep_device(struct hda_codec *codec, int nid);
 void snd_hda_detach_beep_device(struct hda_codec *codec);
 #else
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index af989f6..9cfdb77 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -30,6 +30,7 @@
 #include <sound/tlv.h>
 #include <sound/initval.h>
 #include "hda_local.h"
+#include "hda_beep.h"
 #include <sound/hda_hwdep.h>
 
 /*
@@ -93,6 +94,13 @@
 static inline void hda_keep_power_on(struct hda_codec *codec) {}
 #endif
 
+/**
+ * snd_hda_get_jack_location - Give a location string of the jack
+ * @cfg: pin default config value
+ *
+ * Parse the pin default config value and returns the string of the
+ * jack location, e.g. "Rear", "Front", etc.
+ */
 const char *snd_hda_get_jack_location(u32 cfg)
 {
 	static char *bases[7] = {
@@ -120,6 +128,13 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_get_jack_location);
 
+/**
+ * snd_hda_get_jack_connectivity - Give a connectivity string of the jack
+ * @cfg: pin default config value
+ *
+ * Parse the pin default config value and returns the string of the
+ * jack connectivity, i.e. external or internal connection.
+ */
 const char *snd_hda_get_jack_connectivity(u32 cfg)
 {
 	static char *jack_locations[4] = { "Ext", "Int", "Sep", "Oth" };
@@ -128,6 +143,13 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_get_jack_connectivity);
 
+/**
+ * snd_hda_get_jack_type - Give a type string of the jack
+ * @cfg: pin default config value
+ *
+ * Parse the pin default config value and returns the string of the
+ * jack type, i.e. the purpose of the jack, such as Line-Out or CD.
+ */
 const char *snd_hda_get_jack_type(u32 cfg)
 {
 	static char *jack_types[16] = {
@@ -515,6 +537,7 @@
 	struct hda_codec *codec;
 	list_for_each_entry(codec, &bus->codec_list, list) {
 		snd_hda_hwdep_add_sysfs(codec);
+		snd_hda_hwdep_add_power_sysfs(codec);
 	}
 	return 0;
 }
@@ -820,6 +843,16 @@
 	return 0;
 }
 
+/**
+ * snd_hda_codec_set_pincfg - Override a pin default configuration
+ * @codec: the HDA codec
+ * @nid: NID to set the pin config
+ * @cfg: the pin default config value
+ *
+ * Override a pin default configuration value in the cache.
+ * This value can be read by snd_hda_codec_get_pincfg() in a higher
+ * priority than the real hardware value.
+ */
 int snd_hda_codec_set_pincfg(struct hda_codec *codec,
 			     hda_nid_t nid, unsigned int cfg)
 {
@@ -827,7 +860,15 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_set_pincfg);
 
-/* get the current pin config value of the given pin NID */
+/**
+ * snd_hda_codec_get_pincfg - Obtain a pin-default configuration
+ * @codec: the HDA codec
+ * @nid: NID to get the pin config
+ *
+ * Get the current pin config value of the given pin NID.
+ * If the pincfg value is cached or overridden via sysfs or driver,
+ * returns the cached value.
+ */
 unsigned int snd_hda_codec_get_pincfg(struct hda_codec *codec, hda_nid_t nid)
 {
 	struct hda_pincfg *pin;
@@ -944,7 +985,7 @@
 	mutex_init(&codec->control_mutex);
 	init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info));
 	init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head));
-	snd_array_init(&codec->mixers, sizeof(struct snd_kcontrol *), 32);
+	snd_array_init(&codec->mixers, sizeof(struct hda_nid_item), 60);
 	snd_array_init(&codec->init_pins, sizeof(struct hda_pincfg), 16);
 	snd_array_init(&codec->driver_pins, sizeof(struct hda_pincfg), 16);
 	if (codec->bus->modelname) {
@@ -1026,6 +1067,15 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_new);
 
+/**
+ * snd_hda_codec_configure - (Re-)configure the HD-audio codec
+ * @codec: the HDA codec
+ *
+ * Start parsing of the given codec tree and (re-)initialize the whole
+ * patch instance.
+ *
+ * Returns 0 if successful or a negative error code.
+ */
 int snd_hda_codec_configure(struct hda_codec *codec)
 {
 	int err;
@@ -1088,6 +1138,11 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_setup_stream);
 
+/**
+ * snd_hda_codec_cleanup_stream - clean up the codec for closing
+ * @codec: the CODEC to clean up
+ * @nid: the NID to clean up
+ */
 void snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid)
 {
 	if (!nid)
@@ -1163,8 +1218,17 @@
 	return (struct hda_amp_info *)get_alloc_hash(&codec->amp_cache, key);
 }
 
-/*
- * query AMP capabilities for the given widget and direction
+/**
+ * query_amp_caps - query AMP capabilities
+ * @codec: the HD-auio codec
+ * @nid: the NID to query
+ * @direction: either #HDA_INPUT or #HDA_OUTPUT
+ *
+ * Query AMP capabilities for the given widget and direction.
+ * Returns the obtained capability bits.
+ *
+ * When cap bits have been already read, this doesn't read again but
+ * returns the cached value.
  */
 u32 query_amp_caps(struct hda_codec *codec, hda_nid_t nid, int direction)
 {
@@ -1187,6 +1251,19 @@
 }
 EXPORT_SYMBOL_HDA(query_amp_caps);
 
+/**
+ * snd_hda_override_amp_caps - Override the AMP capabilities
+ * @codec: the CODEC to clean up
+ * @nid: the NID to clean up
+ * @direction: either #HDA_INPUT or #HDA_OUTPUT
+ * @caps: the capability bits to set
+ *
+ * Override the cached AMP caps bits value by the given one.
+ * This function is useful if the driver needs to adjust the AMP ranges,
+ * e.g. limit to 0dB, etc.
+ *
+ * Returns zero if successful or a negative error code.
+ */
 int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
 			      unsigned int caps)
 {
@@ -1222,6 +1299,17 @@
 	return snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
 }
 
+/**
+ * snd_hda_query_pin_caps - Query PIN capabilities
+ * @codec: the HD-auio codec
+ * @nid: the NID to query
+ *
+ * Query PIN capabilities for the given widget.
+ * Returns the obtained capability bits.
+ *
+ * When cap bits have been already read, this doesn't read again but
+ * returns the cached value.
+ */
 u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid)
 {
 	return query_caps_hash(codec, nid, HDA_HASH_PINCAP_KEY(nid),
@@ -1229,6 +1317,40 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps);
 
+/**
+ * snd_hda_pin_sense - execute pin sense measurement
+ * @codec: the CODEC to sense
+ * @nid: the pin NID to sense
+ *
+ * Execute necessary pin sense measurement and return its Presence Detect,
+ * Impedance, ELD Valid etc. status bits.
+ */
+u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+	u32 pincap = snd_hda_query_pin_caps(codec, nid);
+
+	if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+		snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+
+	return snd_hda_codec_read(codec, nid, 0,
+				  AC_VERB_GET_PIN_SENSE, 0);
+}
+EXPORT_SYMBOL_HDA(snd_hda_pin_sense);
+
+/**
+ * snd_hda_jack_detect - query pin Presence Detect status
+ * @codec: the CODEC to sense
+ * @nid: the pin NID to sense
+ *
+ * Query and return the pin's Presence Detect status.
+ */
+int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid)
+{
+        u32 sense = snd_hda_pin_sense(codec, nid);
+        return !!(sense & AC_PINSENSE_PRESENCE);
+}
+EXPORT_SYMBOL_HDA(snd_hda_jack_detect);
+
 /*
  * read the current volume to info
  * if the cache exists, read the cache value.
@@ -1269,8 +1391,15 @@
 	info->vol[ch] = val;
 }
 
-/*
- * read AMP value.  The volume is between 0 to 0x7f, 0x80 = mute bit.
+/**
+ * snd_hda_codec_amp_read - Read AMP value
+ * @codec: HD-audio codec
+ * @nid: NID to read the AMP value
+ * @ch: channel (left=0 or right=1)
+ * @direction: #HDA_INPUT or #HDA_OUTPUT
+ * @index: the index value (only for input direction)
+ *
+ * Read AMP value.  The volume is between 0 to 0x7f, 0x80 = mute bit.
  */
 int snd_hda_codec_amp_read(struct hda_codec *codec, hda_nid_t nid, int ch,
 			   int direction, int index)
@@ -1283,8 +1412,18 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_amp_read);
 
-/*
- * update the AMP value, mask = bit mask to set, val = the value
+/**
+ * snd_hda_codec_amp_update - update the AMP value
+ * @codec: HD-audio codec
+ * @nid: NID to read the AMP value
+ * @ch: channel (left=0 or right=1)
+ * @direction: #HDA_INPUT or #HDA_OUTPUT
+ * @idx: the index value (only for input direction)
+ * @mask: bit mask to set
+ * @val: the bits value to set
+ *
+ * Update the AMP value with a bit mask.
+ * Returns 0 if the value is unchanged, 1 if changed.
  */
 int snd_hda_codec_amp_update(struct hda_codec *codec, hda_nid_t nid, int ch,
 			     int direction, int idx, int mask, int val)
@@ -1303,8 +1442,17 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_amp_update);
 
-/*
- * update the AMP stereo with the same mask and value
+/**
+ * snd_hda_codec_amp_stereo - update the AMP stereo values
+ * @codec: HD-audio codec
+ * @nid: NID to read the AMP value
+ * @direction: #HDA_INPUT or #HDA_OUTPUT
+ * @idx: the index value (only for input direction)
+ * @mask: bit mask to set
+ * @val: the bits value to set
+ *
+ * Update the AMP values like snd_hda_codec_amp_update(), but for a
+ * stereo widget with the same mask and value.
  */
 int snd_hda_codec_amp_stereo(struct hda_codec *codec, hda_nid_t nid,
 			     int direction, int idx, int mask, int val)
@@ -1318,7 +1466,12 @@
 EXPORT_SYMBOL_HDA(snd_hda_codec_amp_stereo);
 
 #ifdef SND_HDA_NEEDS_RESUME
-/* resume the all amp commands from the cache */
+/**
+ * snd_hda_codec_resume_amp - Resume all AMP commands from the cache
+ * @codec: HD-audio codec
+ *
+ * Resume the all amp commands from the cache.
+ */
 void snd_hda_codec_resume_amp(struct hda_codec *codec)
 {
 	struct hda_amp_info *buffer = codec->amp_cache.buf.list;
@@ -1344,7 +1497,12 @@
 EXPORT_SYMBOL_HDA(snd_hda_codec_resume_amp);
 #endif /* SND_HDA_NEEDS_RESUME */
 
-/* volume */
+/**
+ * snd_hda_mixer_amp_volume_info - Info callback for a standard AMP mixer
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_info *uinfo)
 {
@@ -1400,6 +1558,12 @@
 					HDA_AMP_VOLMASK, val);
 }
 
+/**
+ * snd_hda_mixer_amp_volume_get - Get callback for a standard AMP mixer volume
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
@@ -1419,6 +1583,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_get);
 
+/**
+ * snd_hda_mixer_amp_volume_put - Put callback for a standard AMP mixer volume
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_volume_put(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
@@ -1443,6 +1613,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_put);
 
+/**
+ * snd_hda_mixer_amp_volume_put - TLV callback for a standard AMP mixer volume
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_tlv(struct snd_kcontrol *kcontrol, int op_flag,
 			  unsigned int size, unsigned int __user *_tlv)
 {
@@ -1472,8 +1648,16 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_tlv);
 
-/*
- * set (static) TLV for virtual master volume; recalculated as max 0dB
+/**
+ * snd_hda_set_vmaster_tlv - Set TLV for a virtual master control
+ * @codec: HD-audio codec
+ * @nid: NID of a reference widget
+ * @dir: #HDA_INPUT or #HDA_OUTPUT
+ * @tlv: TLV data to be stored, at least 4 elements
+ *
+ * Set (static) TLV data for a virtual master volume using the AMP caps
+ * obtained from the reference NID.
+ * The volume range is recalculated as if the max volume is 0dB.
  */
 void snd_hda_set_vmaster_tlv(struct hda_codec *codec, hda_nid_t nid, int dir,
 			     unsigned int *tlv)
@@ -1507,6 +1691,13 @@
 	return snd_ctl_find_id(codec->bus->card, &id);
 }
 
+/**
+ * snd_hda_find_mixer_ctl - Find a mixer control element with the given name
+ * @codec: HD-audio codec
+ * @name: ctl id name string
+ *
+ * Get the control element with the given id string and IFACE_MIXER.
+ */
 struct snd_kcontrol *snd_hda_find_mixer_ctl(struct hda_codec *codec,
 					    const char *name)
 {
@@ -1514,30 +1705,57 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_find_mixer_ctl);
 
-/* Add a control element and assign to the codec */
-int snd_hda_ctl_add(struct hda_codec *codec, struct snd_kcontrol *kctl)
+/**
+ * snd_hda_ctl-add - Add a control element and assign to the codec
+ * @codec: HD-audio codec
+ * @nid: corresponding NID (optional)
+ * @kctl: the control element to assign
+ *
+ * Add the given control element to an array inside the codec instance.
+ * All control elements belonging to a codec are supposed to be added
+ * by this function so that a proper clean-up works at the free or
+ * reconfiguration time.
+ *
+ * If non-zero @nid is passed, the NID is assigned to the control element.
+ * The assignment is shown in the codec proc file.
+ *
+ * snd_hda_ctl_add() checks the control subdev id field whether
+ * #HDA_SUBDEV_NID_FLAG bit is set.  If set (and @nid is zero), the lower
+ * bits value is taken as the NID to assign.
+ */
+int snd_hda_ctl_add(struct hda_codec *codec, hda_nid_t nid,
+		    struct snd_kcontrol *kctl)
 {
 	int err;
-	struct snd_kcontrol **knewp;
+	struct hda_nid_item *item;
 
+	if (kctl->id.subdevice & HDA_SUBDEV_NID_FLAG) {
+		if (nid == 0)
+			nid = kctl->id.subdevice & 0xffff;
+		kctl->id.subdevice = 0;
+	}
 	err = snd_ctl_add(codec->bus->card, kctl);
 	if (err < 0)
 		return err;
-	knewp = snd_array_new(&codec->mixers);
-	if (!knewp)
+	item = snd_array_new(&codec->mixers);
+	if (!item)
 		return -ENOMEM;
-	*knewp = kctl;
+	item->kctl = kctl;
+	item->nid = nid;
 	return 0;
 }
 EXPORT_SYMBOL_HDA(snd_hda_ctl_add);
 
-/* Clear all controls assigned to the given codec */
+/**
+ * snd_hda_ctls_clear - Clear all controls assigned to the given codec
+ * @codec: HD-audio codec
+ */
 void snd_hda_ctls_clear(struct hda_codec *codec)
 {
 	int i;
-	struct snd_kcontrol **kctls = codec->mixers.list;
+	struct hda_nid_item *items = codec->mixers.list;
 	for (i = 0; i < codec->mixers.used; i++)
-		snd_ctl_remove(codec->bus->card, kctls[i]);
+		snd_ctl_remove(codec->bus->card, items[i].kctl);
 	snd_array_free(&codec->mixers);
 }
 
@@ -1563,6 +1781,16 @@
 	spin_unlock(&card->files_lock);
 }
 
+/**
+ * snd_hda_codec_reset - Clear all objects assigned to the codec
+ * @codec: HD-audio codec
+ *
+ * This frees the all PCM and control elements assigned to the codec, and
+ * clears the caches and restores the pin default configurations.
+ *
+ * When a device is being used, it returns -EBSY.  If successfully freed,
+ * returns zero.
+ */
 int snd_hda_codec_reset(struct hda_codec *codec)
 {
 	struct snd_card *card = codec->bus->card;
@@ -1626,7 +1854,22 @@
 	return 0;
 }
 
-/* create a virtual master control and add slaves */
+/**
+ * snd_hda_add_vmaster - create a virtual master control and add slaves
+ * @codec: HD-audio codec
+ * @name: vmaster control name
+ * @tlv: TLV data (optional)
+ * @slaves: slave control names (optional)
+ *
+ * Create a virtual master control with the given name.  The TLV data
+ * must be either NULL or a valid data.
+ *
+ * @slaves is a NULL-terminated array of strings, each of which is a
+ * slave control name.  All controls with these names are assigned to
+ * the new virtual master control.
+ *
+ * This function returns zero if successful or a negative error code.
+ */
 int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
 			unsigned int *tlv, const char **slaves)
 {
@@ -1643,7 +1886,7 @@
 	kctl = snd_ctl_make_virtual_master(name, tlv);
 	if (!kctl)
 		return -ENOMEM;
-	err = snd_hda_ctl_add(codec, kctl);
+	err = snd_hda_ctl_add(codec, 0, kctl);
 	if (err < 0)
 		return err;
 	
@@ -1668,7 +1911,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
 
-/* switch */
+/**
+ * snd_hda_mixer_amp_switch_info - Info callback for a standard AMP mixer switch
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_switch_info(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_info *uinfo)
 {
@@ -1682,6 +1930,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_info);
 
+/**
+ * snd_hda_mixer_amp_switch_get - Get callback for a standard AMP mixer switch
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_switch_get(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
@@ -1702,6 +1956,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_get);
 
+/**
+ * snd_hda_mixer_amp_switch_put - Put callback for a standard AMP mixer switch
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_COMPOSE_AMP_VAL*() or related macros.
+ */
 int snd_hda_mixer_amp_switch_put(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
@@ -1733,6 +1993,25 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put);
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+/**
+ * snd_hda_mixer_amp_switch_put_beep - Put callback for a beep AMP switch
+ *
+ * This function calls snd_hda_enable_beep_device(), which behaves differently
+ * depending on beep_mode option.
+ */
+int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	long *valp = ucontrol->value.integer.value;
+
+	snd_hda_enable_beep_device(codec, *valp);
+	return snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put_beep);
+#endif /* CONFIG_SND_HDA_INPUT_BEEP */
+
 /*
  * bound volume controls
  *
@@ -1742,6 +2021,12 @@
 #define AMP_VAL_IDX_SHIFT	19
 #define AMP_VAL_IDX_MASK	(0x0f<<19)
 
+/**
+ * snd_hda_mixer_bind_switch_get - Get callback for a bound volume control
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_BIND_MUTE*() macros.
+ */
 int snd_hda_mixer_bind_switch_get(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_value *ucontrol)
 {
@@ -1759,6 +2044,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_switch_get);
 
+/**
+ * snd_hda_mixer_bind_switch_put - Put callback for a bound volume control
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_BIND_MUTE*() macros.
+ */
 int snd_hda_mixer_bind_switch_put(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_value *ucontrol)
 {
@@ -1783,8 +2074,11 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_switch_put);
 
-/*
- * generic bound volume/swtich controls
+/**
+ * snd_hda_mixer_bind_ctls_info - Info callback for a generic bound control
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_BIND_VOL() or HDA_BIND_SW() macros.
  */
 int snd_hda_mixer_bind_ctls_info(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_info *uinfo)
@@ -1803,6 +2097,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_info);
 
+/**
+ * snd_hda_mixer_bind_ctls_get - Get callback for a generic bound control
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_BIND_VOL() or HDA_BIND_SW() macros.
+ */
 int snd_hda_mixer_bind_ctls_get(struct snd_kcontrol *kcontrol,
 				struct snd_ctl_elem_value *ucontrol)
 {
@@ -1820,6 +2120,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_get);
 
+/**
+ * snd_hda_mixer_bind_ctls_put - Put callback for a generic bound control
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_BIND_VOL() or HDA_BIND_SW() macros.
+ */
 int snd_hda_mixer_bind_ctls_put(struct snd_kcontrol *kcontrol,
 				struct snd_ctl_elem_value *ucontrol)
 {
@@ -1843,6 +2149,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_put);
 
+/**
+ * snd_hda_mixer_bind_tlv - TLV callback for a generic bound control
+ *
+ * The control element is supposed to have the private_value field
+ * set up via HDA_BIND_VOL() macro.
+ */
 int snd_hda_mixer_bind_tlv(struct snd_kcontrol *kcontrol, int op_flag,
 			   unsigned int size, unsigned int __user *tlv)
 {
@@ -2126,7 +2438,7 @@
 			return -ENOMEM;
 		kctl->id.index = idx;
 		kctl->private_value = nid;
-		err = snd_hda_ctl_add(codec, kctl);
+		err = snd_hda_ctl_add(codec, nid, kctl);
 		if (err < 0)
 			return err;
 	}
@@ -2165,14 +2477,19 @@
 	.put = spdif_share_sw_put,
 };
 
+/**
+ * snd_hda_create_spdif_share_sw - create Default PCM switch
+ * @codec: the HDA codec
+ * @mout: multi-out instance
+ */
 int snd_hda_create_spdif_share_sw(struct hda_codec *codec,
 				  struct hda_multi_out *mout)
 {
 	if (!mout->dig_out_nid)
 		return 0;
 	/* ATTENTION: here mout is passed as private_data, instead of codec */
-	return snd_hda_ctl_add(codec,
-			   snd_ctl_new1(&spdif_share_sw, mout));
+	return snd_hda_ctl_add(codec, mout->dig_out_nid,
+			      snd_ctl_new1(&spdif_share_sw, mout));
 }
 EXPORT_SYMBOL_HDA(snd_hda_create_spdif_share_sw);
 
@@ -2276,7 +2593,7 @@
 		if (!kctl)
 			return -ENOMEM;
 		kctl->private_value = nid;
-		err = snd_hda_ctl_add(codec, kctl);
+		err = snd_hda_ctl_add(codec, nid, kctl);
 		if (err < 0)
 			return err;
 	}
@@ -2332,7 +2649,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_codec_write_cache);
 
-/* resume the all commands from the cache */
+/**
+ * snd_hda_codec_resume_cache - Resume the all commands from the cache
+ * @codec: HD-audio codec
+ *
+ * Execute all verbs recorded in the command caches to resume.
+ */
 void snd_hda_codec_resume_cache(struct hda_codec *codec)
 {
 	struct hda_cache_head *buffer = codec->cmd_cache.buf.list;
@@ -2452,9 +2774,11 @@
 			    codec->afg ? codec->afg : codec->mfg,
 			    AC_PWRST_D3);
 #ifdef CONFIG_SND_HDA_POWER_SAVE
+	snd_hda_update_power_acct(codec);
 	cancel_delayed_work(&codec->power_work);
 	codec->power_on = 0;
 	codec->power_transition = 0;
+	codec->power_jiffies = jiffies;
 #endif
 }
 
@@ -2756,8 +3080,12 @@
 }
 
 /**
- * snd_hda_is_supported_format - check whether the given node supports
- * the format val
+ * snd_hda_is_supported_format - Check the validity of the format
+ * @codec: HD-audio codec
+ * @nid: NID to check
+ * @format: the HD-audio format value to check
+ *
+ * Check whether the given node supports the format value.
  *
  * Returns 1 if supported, 0 if not.
  */
@@ -2877,51 +3205,36 @@
 	return 0;
 }
 
+/* global */
+const char *snd_hda_pcm_type_name[HDA_PCM_NTYPES] = {
+	"Audio", "SPDIF", "HDMI", "Modem"
+};
+
 /*
  * get the empty PCM device number to assign
  */
 static int get_empty_pcm_device(struct hda_bus *bus, int type)
 {
-	static const char *dev_name[HDA_PCM_NTYPES] = {
-		"Audio", "SPDIF", "HDMI", "Modem"
+	/* audio device indices; not linear to keep compatibility */
+	static int audio_idx[HDA_PCM_NTYPES][5] = {
+		[HDA_PCM_TYPE_AUDIO] = { 0, 2, 4, 5, -1 },
+		[HDA_PCM_TYPE_SPDIF] = { 1, -1 },
+		[HDA_PCM_TYPE_HDMI]  = { 3, 7, 8, 9, -1 },
+		[HDA_PCM_TYPE_MODEM] = { 6, -1 },
 	};
-	/* starting device index for each PCM type */
-	static int dev_idx[HDA_PCM_NTYPES] = {
-		[HDA_PCM_TYPE_AUDIO] = 0,
-		[HDA_PCM_TYPE_SPDIF] = 1,
-		[HDA_PCM_TYPE_HDMI] = 3,
-		[HDA_PCM_TYPE_MODEM] = 6
-	};
-	/* normal audio device indices; not linear to keep compatibility */
-	static int audio_idx[4] = { 0, 2, 4, 5 };
-	int i, dev;
+	int i;
 
-	switch (type) {
-	case HDA_PCM_TYPE_AUDIO:
-		for (i = 0; i < ARRAY_SIZE(audio_idx); i++) {
-			dev = audio_idx[i];
-			if (!test_bit(dev, bus->pcm_dev_bits))
-				goto ok;
-		}
-		snd_printk(KERN_WARNING "Too many audio devices\n");
-		return -EAGAIN;
-	case HDA_PCM_TYPE_SPDIF:
-	case HDA_PCM_TYPE_HDMI:
-	case HDA_PCM_TYPE_MODEM:
-		dev = dev_idx[type];
-		if (test_bit(dev, bus->pcm_dev_bits)) {
-			snd_printk(KERN_WARNING "%s already defined\n",
-				   dev_name[type]);
-			return -EAGAIN;
-		}
-		break;
-	default:
+	if (type >= HDA_PCM_NTYPES) {
 		snd_printk(KERN_WARNING "Invalid PCM type %d\n", type);
 		return -EINVAL;
 	}
- ok:
-	set_bit(dev, bus->pcm_dev_bits);
-	return dev;
+
+	for (i = 0; audio_idx[type][i] >= 0 ; i++)
+		if (!test_and_set_bit(audio_idx[type][i], bus->pcm_dev_bits))
+			return audio_idx[type][i];
+
+	snd_printk(KERN_WARNING "Too many %s devices\n", snd_hda_pcm_type_name[type]);
+	return -EAGAIN;
 }
 
 /*
@@ -3159,14 +3472,14 @@
  */
 int snd_hda_add_new_ctls(struct hda_codec *codec, struct snd_kcontrol_new *knew)
 {
- 	int err;
+	int err;
 
 	for (; knew->name; knew++) {
 		struct snd_kcontrol *kctl;
 		kctl = snd_ctl_new1(knew, codec);
 		if (!kctl)
 			return -ENOMEM;
-		err = snd_hda_ctl_add(codec, kctl);
+		err = snd_hda_ctl_add(codec, 0, kctl);
 		if (err < 0) {
 			if (!codec->addr)
 				return err;
@@ -3174,7 +3487,7 @@
 			if (!kctl)
 				return -ENOMEM;
 			kctl->id.device = codec->addr;
-			err = snd_hda_ctl_add(codec, kctl);
+			err = snd_hda_ctl_add(codec, 0, kctl);
 			if (err < 0)
 				return err;
 		}
@@ -3207,8 +3520,27 @@
 {
 	codec->power_count++;
 	codec->power_on = 1;
+	codec->power_jiffies = jiffies;
 }
 
+/* update the power on/off account with the current jiffies */
+void snd_hda_update_power_acct(struct hda_codec *codec)
+{
+	unsigned long delta = jiffies - codec->power_jiffies;
+	if (codec->power_on)
+		codec->power_on_acct += delta;
+	else
+		codec->power_off_acct += delta;
+	codec->power_jiffies += delta;
+}
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */ 
 void snd_hda_power_up(struct hda_codec *codec)
 {
 	struct hda_bus *bus = codec->bus;
@@ -3217,7 +3549,9 @@
 	if (codec->power_on || codec->power_transition)
 		return;
 
+	snd_hda_update_power_acct(codec);
 	codec->power_on = 1;
+	codec->power_jiffies = jiffies;
 	if (bus->ops.pm_notify)
 		bus->ops.pm_notify(bus);
 	hda_call_codec_resume(codec);
@@ -3229,9 +3563,13 @@
 #define power_save(codec)	\
 	((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
 
-#define power_save(codec)	\
-	((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
-
+/**
+ * snd_hda_power_down - Power-down the codec
+ * @codec: HD-audio codec
+ *
+ * Decrement the power-up counter and schedules the power-off work if
+ * the counter rearches to zero.
+ */ 
 void snd_hda_power_down(struct hda_codec *codec)
 {
 	--codec->power_count;
@@ -3245,6 +3583,19 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_power_down);
 
+/**
+ * snd_hda_check_amp_list_power - Check the amp list and update the power
+ * @codec: HD-audio codec
+ * @check: the object containing an AMP list and the status
+ * @nid: NID to check / update
+ *
+ * Check whether the given NID is in the amp list.  If it's in the list,
+ * check the current AMP status, and update the the power-status according
+ * to the mute status.
+ *
+ * This function is supposed to be set or called from the check_power_status
+ * patch ops.
+ */ 
 int snd_hda_check_amp_list_power(struct hda_codec *codec,
 				 struct hda_loopback_check *check,
 				 hda_nid_t nid)
@@ -3286,6 +3637,10 @@
 /*
  * Channel mode helper
  */
+
+/**
+ * snd_hda_ch_mode_info - Info callback helper for the channel mode enum
+ */
 int snd_hda_ch_mode_info(struct hda_codec *codec,
 			 struct snd_ctl_elem_info *uinfo,
 			 const struct hda_channel_mode *chmode,
@@ -3302,6 +3657,9 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_ch_mode_info);
 
+/**
+ * snd_hda_ch_mode_get - Get callback helper for the channel mode enum
+ */
 int snd_hda_ch_mode_get(struct hda_codec *codec,
 			struct snd_ctl_elem_value *ucontrol,
 			const struct hda_channel_mode *chmode,
@@ -3320,6 +3678,9 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_ch_mode_get);
 
+/**
+ * snd_hda_ch_mode_put - Put callback helper for the channel mode enum
+ */
 int snd_hda_ch_mode_put(struct hda_codec *codec,
 			struct snd_ctl_elem_value *ucontrol,
 			const struct hda_channel_mode *chmode,
@@ -3344,6 +3705,10 @@
 /*
  * input MUX helper
  */
+
+/**
+ * snd_hda_input_mux_info_info - Info callback helper for the input-mux enum
+ */
 int snd_hda_input_mux_info(const struct hda_input_mux *imux,
 			   struct snd_ctl_elem_info *uinfo)
 {
@@ -3362,6 +3727,9 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_input_mux_info);
 
+/**
+ * snd_hda_input_mux_info_put - Put callback helper for the input-mux enum
+ */
 int snd_hda_input_mux_put(struct hda_codec *codec,
 			  const struct hda_input_mux *imux,
 			  struct snd_ctl_elem_value *ucontrol,
@@ -3421,8 +3789,29 @@
 	}
 }
 
-/*
- * open the digital out in the exclusive mode
+/**
+ * snd_hda_bus_reboot_notify - call the reboot notifier of each codec
+ * @bus: HD-audio bus
+ */
+void snd_hda_bus_reboot_notify(struct hda_bus *bus)
+{
+	struct hda_codec *codec;
+
+	if (!bus)
+		return;
+	list_for_each_entry(codec, &bus->codec_list, list) {
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+		if (!codec->power_on)
+			continue;
+#endif
+		if (codec->patch_ops.reboot_notify)
+			codec->patch_ops.reboot_notify(codec);
+	}
+}
+EXPORT_SYMBOL_HDA(snd_hda_bus_reboot_notify);
+
+/**
+ * snd_hda_multi_out_dig_open - open the digital out in the exclusive mode
  */
 int snd_hda_multi_out_dig_open(struct hda_codec *codec,
 			       struct hda_multi_out *mout)
@@ -3437,6 +3826,9 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_open);
 
+/**
+ * snd_hda_multi_out_dig_prepare - prepare the digital out stream
+ */
 int snd_hda_multi_out_dig_prepare(struct hda_codec *codec,
 				  struct hda_multi_out *mout,
 				  unsigned int stream_tag,
@@ -3450,6 +3842,9 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_prepare);
 
+/**
+ * snd_hda_multi_out_dig_cleanup - clean-up the digital out stream
+ */
 int snd_hda_multi_out_dig_cleanup(struct hda_codec *codec,
 				  struct hda_multi_out *mout)
 {
@@ -3460,8 +3855,8 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_cleanup);
 
-/*
- * release the digital out
+/**
+ * snd_hda_multi_out_dig_close - release the digital out stream
  */
 int snd_hda_multi_out_dig_close(struct hda_codec *codec,
 				struct hda_multi_out *mout)
@@ -3473,8 +3868,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_close);
 
-/*
- * set up more restrictions for analog out
+/**
+ * snd_hda_multi_out_analog_open - open analog outputs
+ *
+ * Open analog outputs and set up the hw-constraints.
+ * If the digital outputs can be opened as slave, open the digital
+ * outputs, too.
  */
 int snd_hda_multi_out_analog_open(struct hda_codec *codec,
 				  struct hda_multi_out *mout,
@@ -3519,9 +3918,11 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_multi_out_analog_open);
 
-/*
- * set up the i/o for analog out
- * when the digital out is available, copy the front out to digital out, too.
+/**
+ * snd_hda_multi_out_analog_prepare - Preapre the analog outputs.
+ *
+ * Set up the i/o for analog out.
+ * When the digital out is available, copy the front out to digital out, too.
  */
 int snd_hda_multi_out_analog_prepare(struct hda_codec *codec,
 				     struct hda_multi_out *mout,
@@ -3578,8 +3979,8 @@
 }
 EXPORT_SYMBOL_HDA(snd_hda_multi_out_analog_prepare);
 
-/*
- * clean up the setting for analog out
+/**
+ * snd_hda_multi_out_analog_cleanup - clean up the setting for analog out
  */
 int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec,
 				     struct hda_multi_out *mout)
@@ -3965,8 +4366,14 @@
  * generic arrays
  */
 
-/* get a new element from the given array
- * if it exceeds the pre-allocated array size, re-allocate the array
+/**
+ * snd_array_new - get a new element from the given array
+ * @array: the array object
+ * 
+ * Get a new element from the given array.  If it exceeds the
+ * pre-allocated array size, re-allocate the array.
+ *
+ * Returns NULL if allocation failed.
  */
 void *snd_array_new(struct snd_array *array)
 {
@@ -3990,7 +4397,10 @@
 }
 EXPORT_SYMBOL_HDA(snd_array_new);
 
-/* free the given array elements */
+/**
+ * snd_array_free - free the given array elements
+ * @array: the array object
+ */
 void snd_array_free(struct snd_array *array)
 {
 	kfree(array->list);
@@ -4000,7 +4410,12 @@
 }
 EXPORT_SYMBOL_HDA(snd_array_free);
 
-/*
+/**
+ * snd_print_pcm_rates - Print the supported PCM rates to the string buffer
+ * @pcm: PCM caps bits
+ * @buf: the string buffer to write
+ * @buflen: the max buffer length
+ *
  * used by hda_proc.c and hda_eld.c
  */
 void snd_print_pcm_rates(int pcm, char *buf, int buflen)
@@ -4019,6 +4434,14 @@
 }
 EXPORT_SYMBOL_HDA(snd_print_pcm_rates);
 
+/**
+ * snd_print_pcm_bits - Print the supported PCM fmt bits to the string buffer
+ * @pcm: PCM caps bits
+ * @buf: the string buffer to write
+ * @buflen: the max buffer length
+ *
+ * used by hda_proc.c and hda_eld.c
+ */
 void snd_print_pcm_bits(int pcm, char *buf, int buflen)
 {
 	static unsigned int bits[] = { 8, 16, 20, 24, 32 };
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 99552fb..2d62761 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -286,6 +286,10 @@
 #define AC_PWRST_D1SUP			(1<<1)
 #define AC_PWRST_D2SUP			(1<<2)
 #define AC_PWRST_D3SUP			(1<<3)
+#define AC_PWRST_D3COLDSUP		(1<<4)
+#define AC_PWRST_S3D3COLDSUP		(1<<29)
+#define AC_PWRST_CLKSTOP		(1<<30)
+#define AC_PWRST_EPSS			(1U<<31)
 
 /* Power state values */
 #define AC_PWRST_SETTING		(0xf<<0)
@@ -674,6 +678,7 @@
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	int (*check_power_status)(struct hda_codec *codec, hda_nid_t nid);
 #endif
+	void (*reboot_notify)(struct hda_codec *codec);
 };
 
 /* record for amp information cache */
@@ -771,6 +776,7 @@
 
 	/* beep device */
 	struct hda_beep *beep;
+	unsigned int beep_mode;
 
 	/* widget capabilities cache */
 	unsigned int num_nodes;
@@ -811,6 +817,9 @@
 	unsigned int power_transition :1; /* power-state in transition */
 	int power_count;	/* current (global) power refcount */
 	struct delayed_work power_work; /* delayed task for powerdown */
+	unsigned long power_on_acct;
+	unsigned long power_off_acct;
+	unsigned long power_jiffies;
 #endif
 
 	/* codec-specific additional proc output */
@@ -910,6 +919,7 @@
  * Misc
  */
 void snd_hda_get_codec_name(struct hda_codec *codec, char *name, int namelen);
+void snd_hda_bus_reboot_notify(struct hda_bus *bus);
 
 /*
  * power management
@@ -933,6 +943,7 @@
 void snd_hda_power_up(struct hda_codec *codec);
 void snd_hda_power_down(struct hda_codec *codec);
 #define snd_hda_codec_needs_resume(codec) codec->power_count
+void snd_hda_update_power_acct(struct hda_codec *codec);
 #else
 static inline void snd_hda_power_up(struct hda_codec *codec) {}
 static inline void snd_hda_power_down(struct hda_codec *codec) {}
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index 9446a5a..4228f2f 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -309,17 +309,12 @@
 	return -EINVAL;
 }
 
-static int hdmi_present_sense(struct hda_codec *codec, hda_nid_t nid)
-{
-	return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0);
-}
-
 static int hdmi_eld_valid(struct hda_codec *codec, hda_nid_t nid)
 {
 	int eldv;
 	int present;
 
-	present = hdmi_present_sense(codec, nid);
+	present = snd_hda_pin_sense(codec, nid);
 	eldv    = (present & AC_PINSENSE_ELDV);
 	present = (present & AC_PINSENSE_PRESENCE);
 
@@ -477,6 +472,8 @@
 		[4 ... 7] = "reserved"
 	};
 
+	snd_iprintf(buffer, "monitor_present\t\t%d\n", e->monitor_present);
+	snd_iprintf(buffer, "eld_valid\t\t%d\n", e->eld_valid);
 	snd_iprintf(buffer, "monitor_name\t\t%s\n", e->monitor_name);
 	snd_iprintf(buffer, "connection_type\t\t%s\n",
 				eld_connection_type_names[e->conn_type]);
@@ -518,7 +515,11 @@
 		 * 	monitor_name manufacture_id product_id
 		 * 	eld_version edid_version
 		 */
-		if (!strcmp(name, "connection_type"))
+		if (!strcmp(name, "monitor_present"))
+			e->monitor_present = val;
+		else if (!strcmp(name, "eld_valid"))
+			e->eld_valid = val;
+		else if (!strcmp(name, "connection_type"))
 			e->conn_type = val;
 		else if (!strcmp(name, "port_id"))
 			e->port_id = val;
@@ -560,13 +561,14 @@
 }
 
 
-int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld)
+int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld,
+			 int index)
 {
 	char name[32];
 	struct snd_info_entry *entry;
 	int err;
 
-	snprintf(name, sizeof(name), "eld#%d", codec->addr);
+	snprintf(name, sizeof(name), "eld#%d.%d", codec->addr, index);
 	err = snd_card_proc_new(codec->bus->card, name, &entry);
 	if (err < 0)
 		return err;
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index b36f6c5..092c6a7 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -727,7 +727,8 @@
 		if (is_loopback)
 			add_input_loopback(codec, node->nid, HDA_INPUT, index);
 		snd_printdd("[%s] NID=0x%x, DIR=IN, IDX=0x%x\n", name, node->nid, index);
-		err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+		err = snd_hda_ctl_add(codec, node->nid,
+					snd_ctl_new1(&knew, codec));
 		if (err < 0)
 			return err;
 		created = 1;
@@ -737,7 +738,8 @@
 		if (is_loopback)
 			add_input_loopback(codec, node->nid, HDA_OUTPUT, 0);
 		snd_printdd("[%s] NID=0x%x, DIR=OUT\n", name, node->nid);
-		err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+		err = snd_hda_ctl_add(codec, node->nid,
+					snd_ctl_new1(&knew, codec));
 		if (err < 0)
 			return err;
 		created = 1;
@@ -751,7 +753,8 @@
 	    (node->amp_in_caps & AC_AMPCAP_NUM_STEPS)) {
 		knew = (struct snd_kcontrol_new)HDA_CODEC_VOLUME(name, node->nid, index, HDA_INPUT);
 		snd_printdd("[%s] NID=0x%x, DIR=IN, IDX=0x%x\n", name, node->nid, index);
-		err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+		err = snd_hda_ctl_add(codec, node->nid,
+					snd_ctl_new1(&knew, codec));
 		if (err < 0)
 			return err;
 		created = 1;
@@ -759,7 +762,8 @@
 		   (node->amp_out_caps & AC_AMPCAP_NUM_STEPS)) {
 		knew = (struct snd_kcontrol_new)HDA_CODEC_VOLUME(name, node->nid, 0, HDA_OUTPUT);
 		snd_printdd("[%s] NID=0x%x, DIR=OUT\n", name, node->nid);
-		err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+		err = snd_hda_ctl_add(codec, node->nid,
+					snd_ctl_new1(&knew, codec));
 		if (err < 0)
 			return err;
 		created = 1;
@@ -857,7 +861,7 @@
 	}
 
 	/* create input MUX if multiple sources are available */
-	err = snd_hda_ctl_add(codec, snd_ctl_new1(&cap_sel, codec));
+	err = snd_hda_ctl_add(codec, 0, snd_ctl_new1(&cap_sel, codec));
 	if (err < 0)
 		return err;
 
@@ -875,7 +879,8 @@
 			HDA_CODEC_VOLUME(name, adc_node->nid,
 					 spec->input_mux.items[i].index,
 					 HDA_INPUT);
-		err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+		err = snd_hda_ctl_add(codec, adc_node->nid,
+					snd_ctl_new1(&knew, codec));
 		if (err < 0)
 			return err;
 	}
diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c
index cc24e67..d243286 100644
--- a/sound/pci/hda/hda_hwdep.c
+++ b/sound/pci/hda/hda_hwdep.c
@@ -154,6 +154,44 @@
 	return 0;
 }
 
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static ssize_t power_on_acct_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+	struct hda_codec *codec = hwdep->private_data;
+	snd_hda_update_power_acct(codec);
+	return sprintf(buf, "%u\n", jiffies_to_msecs(codec->power_on_acct));
+}
+
+static ssize_t power_off_acct_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+	struct hda_codec *codec = hwdep->private_data;
+	snd_hda_update_power_acct(codec);
+	return sprintf(buf, "%u\n", jiffies_to_msecs(codec->power_off_acct));
+}
+
+static struct device_attribute power_attrs[] = {
+	__ATTR_RO(power_on_acct),
+	__ATTR_RO(power_off_acct),
+};
+
+int snd_hda_hwdep_add_power_sysfs(struct hda_codec *codec)
+{
+	struct snd_hwdep *hwdep = codec->hwdep;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(power_attrs); i++)
+		snd_add_device_sysfs_file(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card,
+					  hwdep->device, &power_attrs[i]);
+	return 0;
+}
+#endif /* CONFIG_SND_HDA_POWER_SAVE */
+
 #ifdef CONFIG_SND_HDA_RECONFIG
 
 /*
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 6517f58..d822bfc 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -60,10 +60,14 @@
 static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
 static int probe_only[SNDRV_CARDS];
 static int single_cmd;
-static int enable_msi;
+static int enable_msi = -1;
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 static char *patch[SNDRV_CARDS];
 #endif
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+static int beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] =
+					CONFIG_SND_HDA_INPUT_BEEP_MODE};
+#endif
 
 module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
@@ -91,6 +95,11 @@
 module_param_array(patch, charp, NULL, 0444);
 MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface.");
 #endif
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+module_param_array(beep_mode, int, NULL, 0444);
+MODULE_PARM_DESC(beep_mode, "Select HDA Beep registration mode "
+			    "(0=off, 1=on, 2=mute switch on/off) (default=1).");
+#endif
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
@@ -404,6 +413,7 @@
 	unsigned short codec_mask;
 	int  codec_probe_mask; /* copied from probe_mask option */
 	struct hda_bus *bus;
+	unsigned int beep_mode;
 
 	/* CORB/RIRB */
 	struct azx_rb corb;
@@ -677,6 +687,14 @@
 		}
 	}
 
+	if (!chip->polling_mode) {
+		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
+			   "switching to polling mode: last cmd=0x%08x\n",
+			   chip->last_cmd[addr]);
+		chip->polling_mode = 1;
+		goto again;
+	}
+
 	if (chip->msi) {
 		snd_printk(KERN_WARNING SFX "No response from codec, "
 			   "disabling MSI: last cmd=0x%08x\n",
@@ -692,14 +710,6 @@
 		goto again;
 	}
 
-	if (!chip->polling_mode) {
-		snd_printk(KERN_WARNING SFX "azx_get_response timeout, "
-			   "switching to polling mode: last cmd=0x%08x\n",
-			   chip->last_cmd[addr]);
-		chip->polling_mode = 1;
-		goto again;
-	}
-
 	if (chip->probing) {
 		/* If this critical timeout happens during the codec probing
 		 * phase, this is likely an access to a non-existing codec
@@ -1404,6 +1414,7 @@
 			err = snd_hda_codec_new(chip->bus, c, &codec);
 			if (err < 0)
 				continue;
+			codec->beep_mode = chip->beep_mode;
 			codecs++;
 		}
 	}
@@ -2154,6 +2165,7 @@
 static int azx_halt(struct notifier_block *nb, unsigned long event, void *buf)
 {
 	struct azx *chip = container_of(nb, struct azx, reboot_notifier);
+	snd_hda_bus_reboot_notify(chip->bus);
 	azx_stop_chip(chip);
 	return NOTIFY_OK;
 }
@@ -2221,7 +2233,9 @@
 static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
 	{}
 };
 
@@ -2304,11 +2318,9 @@
 }
 
 /*
- * white-list for enable_msi
+ * white/black-list for enable_msi
  */
-static struct snd_pci_quirk msi_white_list[] __devinitdata = {
-	SND_PCI_QUIRK(0x103c, 0x30f7, "HP Pavilion dv4t-1300", 1),
-	SND_PCI_QUIRK(0x103c, 0x3607, "HP Compa CQ40", 1),
+static struct snd_pci_quirk msi_black_list[] __devinitdata = {
 	{}
 };
 
@@ -2316,10 +2328,12 @@
 {
 	const struct snd_pci_quirk *q;
 
-	chip->msi = enable_msi;
-	if (chip->msi)
+	if (enable_msi >= 0) {
+		chip->msi = !!enable_msi;
 		return;
-	q = snd_pci_quirk_lookup(chip->pci, msi_white_list);
+	}
+	chip->msi = 1;	/* enable MSI as default */
+	q = snd_pci_quirk_lookup(chip->pci, msi_black_list);
 	if (q) {
 		printk(KERN_INFO
 		       "hda_intel: msi for device %04x:%04x set to %d\n",
@@ -2578,6 +2592,10 @@
 		goto out_free;
 	card->private_data = chip;
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+	chip->beep_mode = beep_mode[dev];
+#endif
+
 	/* create codec instances */
 	err = azx_codec_create(chip, model[dev]);
 	if (err < 0)
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 5f1dcc5..5778ae8 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -23,6 +23,15 @@
 #ifndef __SOUND_HDA_LOCAL_H
 #define __SOUND_HDA_LOCAL_H
 
+/* We abuse kcontrol_new.subdev field to pass the NID corresponding to
+ * the given new control.  If id.subdev has a bit flag HDA_SUBDEV_NID_FLAG,
+ * snd_hda_ctl_add() takes the lower-bit subdev value as a valid NID.
+ * 
+ * Note that the subdevice field is cleared again before the real registration
+ * in snd_hda_ctl_add(), so that this value won't appear in the outside.
+ */
+#define HDA_SUBDEV_NID_FLAG	(1U << 31)
+
 /*
  * for mixer controls
  */
@@ -33,6 +42,7 @@
 /* mono volume with index (index=0,1,...) (channel=1,2) */
 #define HDA_CODEC_VOLUME_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx,  \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | (nid), \
 	  .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \
 	  	    SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
 	  	    SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
@@ -53,6 +63,7 @@
 /* mono mute switch with index (index=0,1,...) (channel=1,2) */
 #define HDA_CODEC_MUTE_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx, \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | (nid), \
 	  .info = snd_hda_mixer_amp_switch_info, \
 	  .get = snd_hda_mixer_amp_switch_get, \
 	  .put = snd_hda_mixer_amp_switch_put, \
@@ -66,6 +77,28 @@
 /* stereo mute switch */
 #define HDA_CODEC_MUTE(xname, nid, xindex, direction) \
 	HDA_CODEC_MUTE_MONO(xname, nid, 3, xindex, direction)
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+/* special beep mono mute switch with index (index=0,1,...) (channel=1,2) */
+#define HDA_CODEC_MUTE_BEEP_MONO_IDX(xname, xcidx, nid, channel, xindex, direction) \
+	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xcidx, \
+	  .subdevice = HDA_SUBDEV_NID_FLAG | (nid), \
+	  .info = snd_hda_mixer_amp_switch_info, \
+	  .get = snd_hda_mixer_amp_switch_get, \
+	  .put = snd_hda_mixer_amp_switch_put_beep, \
+	  .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, xindex, direction) }
+#else
+/* no digital beep - just the standard one */
+#define HDA_CODEC_MUTE_BEEP_MONO_IDX(xname, xcidx, nid, ch, xidx, dir) \
+	HDA_CODEC_MUTE_MONO_IDX(xname, xcidx, nid, ch, xidx, dir)
+#endif /* CONFIG_SND_HDA_INPUT_BEEP */
+/* special beep mono mute switch */
+#define HDA_CODEC_MUTE_BEEP_MONO(xname, nid, channel, xindex, direction) \
+	HDA_CODEC_MUTE_BEEP_MONO_IDX(xname, 0, nid, channel, xindex, direction)
+/* special beep stereo mute switch */
+#define HDA_CODEC_MUTE_BEEP(xname, nid, xindex, direction) \
+	HDA_CODEC_MUTE_BEEP_MONO(xname, nid, 3, xindex, direction)
+
+extern const char *snd_hda_pcm_type_name[];
 
 int snd_hda_mixer_amp_volume_info(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_info *uinfo);
@@ -81,6 +114,10 @@
 				 struct snd_ctl_elem_value *ucontrol);
 int snd_hda_mixer_amp_switch_put(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol);
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+int snd_hda_mixer_amp_switch_put_beep(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_value *ucontrol);
+#endif
 /* lowlevel accessor with caching; use carefully */
 int snd_hda_codec_amp_read(struct hda_codec *codec, hda_nid_t nid, int ch,
 			   int direction, int index);
@@ -424,8 +461,16 @@
 int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
 			      unsigned int caps);
 u32 snd_hda_query_pin_caps(struct hda_codec *codec, hda_nid_t nid);
+u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid);
+int snd_hda_jack_detect(struct hda_codec *codec, hda_nid_t nid);
 
-int snd_hda_ctl_add(struct hda_codec *codec, struct snd_kcontrol *kctl);
+struct hda_nid_item {
+	struct snd_kcontrol *kctl;
+	hda_nid_t nid;
+};
+
+int snd_hda_ctl_add(struct hda_codec *codec, hda_nid_t nid,
+		    struct snd_kcontrol *kctl);
 void snd_hda_ctls_clear(struct hda_codec *codec);
 
 /*
@@ -437,6 +482,15 @@
 static inline int snd_hda_create_hwdep(struct hda_codec *codec) { return 0; }
 #endif
 
+#if defined(CONFIG_SND_HDA_POWER_SAVE) && defined(CONFIG_SND_HDA_HWDEP)
+int snd_hda_hwdep_add_power_sysfs(struct hda_codec *codec);
+#else
+static inline int snd_hda_hwdep_add_power_sysfs(struct hda_codec *codec)
+{
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_SND_HDA_RECONFIG
 int snd_hda_hwdep_add_sysfs(struct hda_codec *codec);
 #else
@@ -490,7 +544,8 @@
  * AMP control callbacks
  */
 /* retrieve parameters from private_value */
-#define get_amp_nid(kc)		((kc)->private_value & 0xffff)
+#define get_amp_nid_(pv)	((pv) & 0xffff)
+#define get_amp_nid(kc)		get_amp_nid_((kc)->private_value)
 #define get_amp_channels(kc)	(((kc)->private_value >> 16) & 0x3)
 #define get_amp_direction(kc)	(((kc)->private_value >> 18) & 0x1)
 #define get_amp_index(kc)	(((kc)->private_value >> 19) & 0xf)
@@ -516,9 +571,11 @@
  * ELD: EDID Like Data
  */
 struct hdmi_eld {
+	bool	monitor_present;
+	bool	eld_valid;
 	int	eld_size;
 	int	baseline_len;
-	int	eld_ver;	/* (eld_ver == 0) indicates invalid ELD */
+	int	eld_ver;
 	int	cea_edid_ver;
 	char	monitor_name[ELD_MAX_MNL + 1];
 	int	manufacture_id;
@@ -541,11 +598,13 @@
 void snd_hdmi_show_eld(struct hdmi_eld *eld);
 
 #ifdef CONFIG_PROC_FS
-int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld);
+int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld,
+			 int index);
 void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld);
 #else
 static inline int snd_hda_eld_proc_new(struct hda_codec *codec,
-				       struct hdmi_eld *eld)
+				       struct hdmi_eld *eld,
+				       int index)
 {
 	return 0;
 }
diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c
index 95f24e4..09476fc 100644
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -26,6 +26,21 @@
 #include "hda_codec.h"
 #include "hda_local.h"
 
+static char *bits_names(unsigned int bits, char *names[], int size)
+{
+	int i, n;
+	static char buf[128];
+
+	for (i = 0, n = 0; i < size; i++) {
+		if (bits & (1U<<i) && names[i])
+			n += snprintf(buf + n, sizeof(buf) - n, " %s",
+				      names[i]);
+	}
+	buf[n] = '\0';
+
+	return buf;
+}
+
 static const char *get_wid_type_name(unsigned int wid_value)
 {
 	static char *names[16] = {
@@ -46,6 +61,41 @@
 		return "UNKNOWN Widget";
 }
 
+static void print_nid_mixers(struct snd_info_buffer *buffer,
+			     struct hda_codec *codec, hda_nid_t nid)
+{
+	int i;
+	struct hda_nid_item *items = codec->mixers.list;
+	struct snd_kcontrol *kctl;
+	for (i = 0; i < codec->mixers.used; i++) {
+		if (items[i].nid == nid) {
+			kctl = items[i].kctl;
+			snd_iprintf(buffer,
+			  "  Control: name=\"%s\", index=%i, device=%i\n",
+			  kctl->id.name, kctl->id.index, kctl->id.device);
+		}
+	}
+}
+
+static void print_nid_pcms(struct snd_info_buffer *buffer,
+			   struct hda_codec *codec, hda_nid_t nid)
+{
+	int pcm, type;
+	struct hda_pcm *cpcm;
+	for (pcm = 0; pcm < codec->num_pcms; pcm++) {
+		cpcm = &codec->pcm_info[pcm];
+		for (type = 0; type < 2; type++) {
+			if (cpcm->stream[type].nid != nid || cpcm->pcm == NULL)
+				continue;
+			snd_iprintf(buffer, "  Device: name=\"%s\", "
+				    "type=\"%s\", device=%i\n",
+				    cpcm->name,
+				    snd_hda_pcm_type_name[cpcm->pcm_type],
+				    cpcm->pcm->device);
+		}
+	}
+}
+
 static void print_amp_caps(struct snd_info_buffer *buffer,
 			   struct hda_codec *codec, hda_nid_t nid, int dir)
 {
@@ -363,8 +413,24 @@
 static void print_power_state(struct snd_info_buffer *buffer,
 			      struct hda_codec *codec, hda_nid_t nid)
 {
+	static char *names[] = {
+		[ilog2(AC_PWRST_D0SUP)]		= "D0",
+		[ilog2(AC_PWRST_D1SUP)]		= "D1",
+		[ilog2(AC_PWRST_D2SUP)]		= "D2",
+		[ilog2(AC_PWRST_D3SUP)]		= "D3",
+		[ilog2(AC_PWRST_D3COLDSUP)]	= "D3cold",
+		[ilog2(AC_PWRST_S3D3COLDSUP)]	= "S3D3cold",
+		[ilog2(AC_PWRST_CLKSTOP)]	= "CLKSTOP",
+		[ilog2(AC_PWRST_EPSS)]		= "EPSS",
+	};
+
+	int sup = snd_hda_param_read(codec, nid, AC_PAR_POWER_STATE);
 	int pwr = snd_hda_codec_read(codec, nid, 0,
 				     AC_VERB_GET_POWER_STATE, 0);
+	if (sup)
+		snd_iprintf(buffer, "  Power states: %s\n",
+			    bits_names(sup, names, ARRAY_SIZE(names)));
+
 	snd_iprintf(buffer, "  Power: setting=%s, actual=%s\n",
 		    get_pwr_state(pwr & AC_PWRST_SETTING),
 		    get_pwr_state((pwr & AC_PWRST_ACTUAL) >>
@@ -457,6 +523,7 @@
 			    (data & (1<<i)) ? 1 : 0,
 			    (unsol & (1<<i)) ? 1 : 0);
 	/* FIXME: add GPO and GPI pin information */
+	print_nid_mixers(buffer, codec, nid);
 }
 
 static void print_codec_info(struct snd_info_entry *entry,
@@ -536,6 +603,9 @@
 			snd_iprintf(buffer, " CP");
 		snd_iprintf(buffer, "\n");
 
+		print_nid_mixers(buffer, codec, nid);
+		print_nid_pcms(buffer, codec, nid);
+
 		/* volume knob is a special widget that always have connection
 		 * list
 		 */
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 2d603f6..455a049 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -156,15 +156,19 @@
 
 static void ad198x_free_kctls(struct hda_codec *codec);
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
 /* additional beep mixers; the actual parameters are overwritten at build */
 static struct snd_kcontrol_new ad_beep_mixer[] = {
 	HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE_BEEP("Beep Playback Switch", 0, 0, HDA_OUTPUT),
 	{ } /* end */
 };
 
 #define set_beep_amp(spec, nid, idx, dir) \
 	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir)) /* mono */
+#else
+#define set_beep_amp(spec, nid, idx, dir) /* NOP */
+#endif
 
 static int ad198x_build_controls(struct hda_codec *codec)
 {
@@ -194,6 +198,7 @@
 	}
 
 	/* create beep controls if needed */
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
 	if (spec->beep_amp) {
 		struct snd_kcontrol_new *knew;
 		for (knew = ad_beep_mixer; knew->name; knew++) {
@@ -202,11 +207,14 @@
 			if (!kctl)
 				return -ENOMEM;
 			kctl->private_value = spec->beep_amp;
-			err = snd_hda_ctl_add(codec, kctl);
+			err = snd_hda_ctl_add(codec,
+						get_amp_nid_(spec->beep_amp),
+						kctl);
 			if (err < 0)
 				return err;
 		}
 	}
+#endif
 
 	/* if we have no master control, let's create it */
 	if (!snd_hda_find_mixer_ctl(codec, "Master Playback Volume")) {
@@ -712,10 +720,10 @@
 static void ad1986a_automic(struct hda_codec *codec)
 {
 	unsigned int present;
-	present = snd_hda_codec_read(codec, 0x1f, 0, AC_VERB_GET_PIN_SENSE, 0);
+	present = snd_hda_jack_detect(codec, 0x1f);
 	/* 0 = 0x1f, 2 = 0x1d, 4 = mixed */
 	snd_hda_codec_write(codec, 0x0f, 0, AC_VERB_SET_CONNECT_SEL,
-			    (present & AC_PINSENSE_PRESENCE) ? 0 : 2);
+			    present ? 0 : 2);
 }
 
 #define AD1986A_MIC_EVENT		0x36
@@ -754,10 +762,8 @@
 static void ad1986a_hp_automute(struct hda_codec *codec)
 {
 	struct ad198x_spec *spec = codec->spec;
-	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = !!(present & 0x80000000);
+	spec->jack_present = snd_hda_jack_detect(codec, 0x1a);
 	if (spec->inv_jack_detect)
 		spec->jack_present = !spec->jack_present;
 	ad1986a_update_hp(codec);
@@ -1547,8 +1553,7 @@
 {
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x06, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x06);
 	snd_hda_codec_amp_stereo(codec, 0x05, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
@@ -1568,8 +1573,7 @@
 	};
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x08, 0,
-			    	 AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x08);
 	if (present)
 		snd_hda_sequence_write(codec, mic_jack_on);
 	else
@@ -2524,7 +2528,7 @@
 {
 	if ((res >> 26) != AD1988_HP_EVENT)
 		return;
-	if (snd_hda_codec_read(codec, 0x11, 0, AC_VERB_GET_PIN_SENSE, 0) & (1 << 31))
+	if (snd_hda_jack_detect(codec, 0x11))
 		snd_hda_sequence_write(codec, ad1988_laptop_hp_on);
 	else
 		snd_hda_sequence_write(codec, ad1988_laptop_hp_off);
@@ -2569,6 +2573,8 @@
 	knew->name = kstrdup(name, GFP_KERNEL);
 	if (! knew->name)
 		return -ENOMEM;
+	if (get_amp_nid_(val))
+		knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
 	knew->private_value = val;
 	return 0;
 }
@@ -3768,8 +3774,7 @@
 {
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x11, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x11);
 	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_EAPD_BTLENABLE,
@@ -3781,8 +3786,7 @@
 {
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x14);
 	snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL,
 			    present ? 0 : 1);
 }
@@ -3817,13 +3821,9 @@
 {
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x11, 0, AC_VERB_GET_PIN_SENSE, 0);
-	present &= AC_PINSENSE_PRESENCE;
-	if (!present) {
-		present = snd_hda_codec_read(codec, 0x12, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		present &= AC_PINSENSE_PRESENCE;
-	}
+	present = snd_hda_jack_detect(codec, 0x11);
+	if (!present)
+		present = snd_hda_jack_detect(codec, 0x12);
 	snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_EAPD_BTLENABLE,
@@ -3835,11 +3835,9 @@
 {
 	unsigned int idx;
 
-	if (snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0) &
-	    AC_PINSENSE_PRESENCE)
+	if (snd_hda_jack_detect(codec, 0x14))
 		idx = 0;
-	else if (snd_hda_codec_read(codec, 0x1c, 0, AC_VERB_GET_PIN_SENSE, 0) &
-		 AC_PINSENSE_PRESENCE)
+	else if (snd_hda_jack_detect(codec, 0x1c))
 		idx = 4;
 	else
 		idx = 1;
@@ -4008,8 +4006,7 @@
 {
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x11, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x11);
 	snd_hda_codec_amp_stereo(codec, 0x12, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
@@ -4117,14 +4114,12 @@
 /* switch to external mic if plugged */
 static void ad1984a_touchsmart_automic(struct hda_codec *codec)
 {
-	if (snd_hda_codec_read(codec, 0x1c, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000) {
+	if (snd_hda_jack_detect(codec, 0x1c))
 		snd_hda_codec_write(codec, 0x0c, 0,
 				     AC_VERB_SET_CONNECT_SEL, 0x4);
-	} else {
+	else
 		snd_hda_codec_write(codec, 0x0c, 0,
 				     AC_VERB_SET_CONNECT_SEL, 0x5);
-	}
 }
 
 
diff --git a/sound/pci/hda/patch_ca0110.c b/sound/pci/hda/patch_ca0110.c
index d08353d..af47801 100644
--- a/sound/pci/hda/patch_ca0110.c
+++ b/sound/pci/hda/patch_ca0110.c
@@ -144,7 +144,7 @@
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_MUTE_MONO(namestr, nid, chan, 0, type);
 	sprintf(namestr, "%s %s Switch", pfx, dirstr[dir]);
-	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+	return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
 }
 
 static int _add_volume(struct hda_codec *codec, hda_nid_t nid, const char *pfx,
@@ -155,7 +155,7 @@
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_VOLUME_MONO(namestr, nid, chan, 0, type);
 	sprintf(namestr, "%s %s Volume", pfx, dirstr[dir]);
-	return snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+	return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec));
 }
 
 #define add_out_switch(codec, nid, pfx)	_add_switch(codec, nid, pfx, 3, 0)
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 8ba3068..2439e84 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -500,7 +500,7 @@
 	knew.private_value = pval;
 	snprintf(tmp, sizeof(tmp), "%s %s Switch", name, dir_sfx[dir]);
 	*kctlp = snd_ctl_new1(&knew, codec);
-	return snd_hda_ctl_add(codec, *kctlp);
+	return snd_hda_ctl_add(codec, get_amp_nid_(pval), *kctlp);
 }
 
 static int add_volume(struct hda_codec *codec, const char *name,
@@ -513,7 +513,7 @@
 	knew.private_value = pval;
 	snprintf(tmp, sizeof(tmp), "%s %s Volume", name, dir_sfx[dir]);
 	*kctlp = snd_ctl_new1(&knew, codec);
-	return snd_hda_ctl_add(codec, *kctlp);
+	return snd_hda_ctl_add(codec, get_amp_nid_(pval), *kctlp);
 }
 
 static void fix_volume_caps(struct hda_codec *codec, hda_nid_t dac)
@@ -536,14 +536,14 @@
 
 	spec->vmaster_sw =
 		snd_ctl_make_virtual_master("Master Playback Switch", NULL);
-	err = snd_hda_ctl_add(codec, spec->vmaster_sw);
+	err = snd_hda_ctl_add(codec, dac, spec->vmaster_sw);
 	if (err < 0)
 		return err;
 
 	snd_hda_set_vmaster_tlv(codec, dac, HDA_OUTPUT, tlv);
 	spec->vmaster_vol =
 		snd_ctl_make_virtual_master("Master Playback Volume", tlv);
-	err = snd_hda_ctl_add(codec, spec->vmaster_vol);
+	err = snd_hda_ctl_add(codec, dac, spec->vmaster_vol);
 	if (err < 0)
 		return err;
 	return 0;
@@ -756,13 +756,13 @@
 		if (!kctl)
 			return -ENOMEM;
 		kctl->private_value = (long)spec->capture_bind[i];
-		err = snd_hda_ctl_add(codec, kctl);
+		err = snd_hda_ctl_add(codec, 0, kctl);
 		if (err < 0)
 			return err;
 	}
 	
 	if (spec->num_inputs > 1 && !spec->mic_detect) {
-		err = snd_hda_ctl_add(codec,
+		err = snd_hda_ctl_add(codec, 0,
 				      snd_ctl_new1(&cs_capture_source, codec));
 		if (err < 0)
 			return err;
@@ -807,7 +807,7 @@
 {
 	struct cs_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->autocfg;
-	unsigned int caps, present, hp_present;
+	unsigned int caps, hp_present;
 	hda_nid_t nid;
 	int i;
 
@@ -817,12 +817,7 @@
 		caps = snd_hda_query_pin_caps(codec, nid);
 		if (!(caps & AC_PINCAP_PRES_DETECT))
 			continue;
-		if (caps & AC_PINCAP_TRIG_REQ)
-			snd_hda_codec_read(codec, nid, 0,
-					   AC_VERB_SET_PIN_SENSE, 0);
-		present = snd_hda_codec_read(codec, nid, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		hp_present |= (present & AC_PINSENSE_PRESENCE) != 0;
+		hp_present = snd_hda_jack_detect(codec, nid);
 		if (hp_present)
 			break;
 	}
@@ -844,15 +839,11 @@
 	struct cs_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->autocfg;
 	hda_nid_t nid;
-	unsigned int caps, present;
+	unsigned int present;
 	
 	nid = cfg->input_pins[spec->automic_idx];
-	caps = snd_hda_query_pin_caps(codec, nid);
-	if (caps & AC_PINCAP_TRIG_REQ)
-		snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, nid, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	if (present & AC_PINSENSE_PRESENCE)
+	present = snd_hda_jack_detect(codec, nid);
+	if (present)
 		change_cur_input(codec, spec->automic_idx, 0);
 	else {
 		unsigned int imic = (spec->automic_idx == AUTO_PIN_MIC) ?
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 780e1a7..85c81fe 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -197,8 +197,8 @@
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0, HDA_INPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x08, 0, HDA_INPUT),
 	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0, HDA_INPUT),
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x23, 0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x23, 0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Beep Playback Volume", 0x23, 0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Beep Playback Switch", 0x23, 0, HDA_OUTPUT),
 	{ } /* end */
 };
 
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 905859d..a09c03c 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -397,9 +397,7 @@
 		for (i = 0; i < spec->jacks.used; i++) {
 			if (jacks->nid == nid) {
 				unsigned int present;
-				present = snd_hda_codec_read(codec, nid, 0,
-						AC_VERB_GET_PIN_SENSE, 0) &
-					AC_PINSENSE_PRESENCE;
+				present = snd_hda_jack_detect(codec, nid);
 
 				present = (present) ? jacks->type : 0 ;
 
@@ -750,8 +748,7 @@
 	};
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x12, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x12);
 	if (present)
 		snd_hda_sequence_write(codec, mic_jack_on);
 	else
@@ -765,8 +762,7 @@
 	struct conexant_spec *spec = codec->spec;
 	unsigned int bits;
 
-	spec->hp_present = snd_hda_codec_read(codec, 0x11, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	spec->hp_present = snd_hda_jack_detect(codec, 0x11);
 
 	bits = (spec->hp_present || !spec->cur_eapd) ? HDA_AMP_MUTE : 0; 
 	snd_hda_codec_amp_stereo(codec, 0x10, HDA_OUTPUT, 0,
@@ -1175,9 +1171,10 @@
 
 	switch (codec->subsystem_id >> 16) {
 	case 0x103c:
-		/* HP laptop has a really bad sound over 0dB on NID 0x17.
-		 * Fix max PCM level to 0 dB
-		 * (originall it has 0x2b steps with 0dB offset 0x14)
+	case 0x1734:
+		/* HP & Fujitsu-Siemens laptops have really bad sound over 0dB
+		 * on NID 0x17. Fix max PCM level to 0 dB
+		 * (originally it has 0x2b steps with 0dB offset 0x14)
 		 */
 		snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT,
 					  (0x14 << AC_AMPCAP_OFFSET_SHIFT) |
@@ -1243,8 +1240,7 @@
 	struct conexant_spec *spec = codec->spec;
 	unsigned int bits;
 
-	spec->hp_present = snd_hda_codec_read(codec, 0x13, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	spec->hp_present = snd_hda_jack_detect(codec, 0x13);
 
 	bits = (spec->hp_present || !spec->cur_eapd) ? HDA_AMP_MUTE : 0;
 	/* See the note in cxt5047_hp_master_sw_put */
@@ -1267,8 +1263,7 @@
 	};
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x15);
 	if (present)
 		snd_hda_sequence_write(codec, mic_jack_on);
 	else
@@ -1415,16 +1410,7 @@
 		.get = conexant_mux_enum_get,
 		.put = conexant_mux_enum_put,
 	},
-	HDA_CODEC_VOLUME("Input-1 Volume", 0x1a, 0x0, HDA_INPUT),
-	HDA_CODEC_MUTE("Input-1 Switch", 0x1a, 0x0, HDA_INPUT),
-	HDA_CODEC_VOLUME("Input-2 Volume", 0x1a, 0x1, HDA_INPUT),
-	HDA_CODEC_MUTE("Input-2 Switch", 0x1a, 0x1, HDA_INPUT),
-	HDA_CODEC_VOLUME("Input-3 Volume", 0x1a, 0x2, HDA_INPUT),
-	HDA_CODEC_MUTE("Input-3 Switch", 0x1a, 0x2, HDA_INPUT),
-	HDA_CODEC_VOLUME("Input-4 Volume", 0x1a, 0x3, HDA_INPUT),
-	HDA_CODEC_MUTE("Input-4 Switch", 0x1a, 0x3, HDA_INPUT),
-	HDA_CODEC_VOLUME("Input-5 Volume", 0x1a, 0x4, HDA_INPUT),
-	HDA_CODEC_MUTE("Input-5 Switch", 0x1a, 0x4, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost Volume", 0x1a, 0x0, HDA_OUTPUT),
 
 	{ } /* end */
 };
@@ -1621,9 +1607,7 @@
 
 	if (spec->no_auto_mic)
 		return;
-	present = snd_hda_codec_read(codec, 0x17, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) &
-		AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x17);
 	snd_hda_codec_write(codec, 0x14, 0,
 			    AC_VERB_SET_CONNECT_SEL,
 			    present ? 0x01 : 0x00);
@@ -1638,9 +1622,7 @@
 
 	if (spec->no_auto_mic)
 		return;
-	present = snd_hda_codec_read(codec, 0x18, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) &
-		AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x18);
 	if (present)
 		spec->cur_adc_idx = 1;
 	else
@@ -1661,9 +1643,7 @@
 {
 	struct conexant_spec *spec = codec->spec;
 
-	spec->hp_present = snd_hda_codec_read(codec, 0x16, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) &
-		AC_PINSENSE_PRESENCE;
+	spec->hp_present = snd_hda_jack_detect(codec, 0x16);
 	cxt5051_update_speaker(codec);
 }
 
@@ -2011,8 +1991,47 @@
 	};
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x1a, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x1a);
+	if (present) {
+		snd_printdd("CXT5066: external microphone detected\n");
+		snd_hda_sequence_write(codec, ext_mic_present);
+	} else {
+		snd_printdd("CXT5066: external microphone absent\n");
+		snd_hda_sequence_write(codec, ext_mic_absent);
+	}
+}
+
+/* toggle input of built-in digital mic and mic jack appropriately */
+static void cxt5066_vostro_automic(struct hda_codec *codec)
+{
+	struct conexant_spec *spec = codec->spec;
+	unsigned int present;
+
+	struct hda_verb ext_mic_present[] = {
+		/* enable external mic, port B */
+		{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias},
+
+		/* switch to external mic input */
+		{0x17, AC_VERB_SET_CONNECT_SEL, 0},
+		{0x14, AC_VERB_SET_CONNECT_SEL, 0},
+
+		/* disable internal digital mic */
+		{0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+		{}
+	};
+	static struct hda_verb ext_mic_absent[] = {
+		/* enable internal mic, port C */
+		{0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+		/* switch to internal mic input */
+		{0x14, AC_VERB_SET_CONNECT_SEL, 2},
+
+		/* disable external mic, port B */
+		{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+		{}
+	};
+
+	present = snd_hda_jack_detect(codec, 0x1a);
 	if (present) {
 		snd_printdd("CXT5066: external microphone detected\n");
 		snd_hda_sequence_write(codec, ext_mic_present);
@@ -2029,12 +2048,10 @@
 	unsigned int portA, portD;
 
 	/* Port A */
-	portA = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
+	portA = snd_hda_jack_detect(codec, 0x19);
 
 	/* Port D */
-	portD = (snd_hda_codec_read(codec, 0x1c, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE) << 1;
+	portD = snd_hda_jack_detect(codec, 0x1c);
 
 	spec->hp_present = !!(portA | portD);
 	snd_printdd("CXT5066: hp automute portA=%x portD=%x present=%d\n",
@@ -2056,6 +2073,20 @@
 	}
 }
 
+/* unsolicited event for jack sensing */
+static void cxt5066_vostro_event(struct hda_codec *codec, unsigned int res)
+{
+	snd_printdd("CXT5066_vostro: unsol event %x (%x)\n", res, res >> 26);
+	switch (res >> 26) {
+	case CONEXANT_HP_EVENT:
+		cxt5066_hp_automute(codec);
+		break;
+	case CONEXANT_MIC_EVENT:
+		cxt5066_vostro_automic(codec);
+		break;
+	}
+}
+
 static const struct hda_input_mux cxt5066_analog_mic_boost = {
 	.num_items = 5,
 	.items = {
@@ -2297,6 +2328,67 @@
 	{ } /* end */
 };
 
+static struct hda_verb cxt5066_init_verbs_vostro[] = {
+	/* Port A: headphones */
+	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+	/* Port B: external microphone */
+	{0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+	/* Port C: unused */
+	{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+	/* Port D: unused */
+	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+	/* Port E: unused, but has primary EAPD */
+	{0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x1d, AC_VERB_SET_EAPD_BTLENABLE, 0x2}, /* default on */
+
+	/* Port F: unused */
+	{0x1e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+	/* Port G: internal speakers */
+	{0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x1f, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
+
+	/* DAC1 */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+
+	/* DAC2: unused */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+
+	/* Digital microphone port */
+	{0x23, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+
+	/* Audio input selectors */
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE | 0x3},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+
+	/* Disable SPDIF */
+	{0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+	{0x22, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
+
+	/* enable unsolicited events for Port A and B */
+	{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+	{0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
+	{ } /* end */
+};
+
 static struct hda_verb cxt5066_init_verbs_portd_lo[] = {
 	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
 	{ } /* end */
@@ -2318,6 +2410,7 @@
 	CXT5066_LAPTOP,			/* Laptops w/ EAPD support */
 	CXT5066_DELL_LAPTOP,	/* Dell Laptop */
 	CXT5066_OLPC_XO_1_5,	/* OLPC XO 1.5 */
+	CXT5066_DELL_VOSTO,	/* Dell Vostro 1015i */
 	CXT5066_MODELS
 };
 
@@ -2325,6 +2418,7 @@
 	[CXT5066_LAPTOP]		= "laptop",
 	[CXT5066_DELL_LAPTOP]	= "dell-laptop",
 	[CXT5066_OLPC_XO_1_5]	= "olpc-xo-1_5",
+	[CXT5066_DELL_VOSTO]    = "dell-vostro"
 };
 
 static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
@@ -2333,6 +2427,7 @@
 	SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
 		      CXT5066_DELL_LAPTOP),
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
+	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
 	{}
 };
 
@@ -2400,6 +2495,19 @@
 		/* input source automatically selected */
 		spec->input_mux = NULL;
 		break;
+	case CXT5066_DELL_VOSTO:
+		codec->patch_ops.unsol_event = cxt5066_vostro_event;
+		spec->init_verbs[0] = cxt5066_init_verbs_vostro;
+		spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc;
+		spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+		spec->port_d_mode = 0;
+
+		/* no S/PDIF out */
+		spec->multiout.dig_out_nid = 0;
+
+		/* input source automatically selected */
+		spec->input_mux = NULL;
+		break;
 	}
 
 	return 0;
@@ -2417,6 +2525,8 @@
 	  .patch = patch_cxt5051 },
 	{ .id = 0x14f15066, .name = "CX20582 (Pebble)",
 	  .patch = patch_cxt5066 },
+	{ .id = 0x14f15067, .name = "CX20583 (Pebble HSF)",
+	  .patch = patch_cxt5066 },
 	{} /* terminator */
 };
 
@@ -2424,6 +2534,7 @@
 MODULE_ALIAS("snd-hda-codec-id:14f15047");
 MODULE_ALIAS("snd-hda-codec-id:14f15051");
 MODULE_ALIAS("snd-hda-codec-id:14f15066");
+MODULE_ALIAS("snd-hda-codec-id:14f15067");
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Conexant HD-audio codec");
diff --git a/sound/pci/hda/patch_intelhdmi.c b/sound/pci/hda/patch_intelhdmi.c
index 01a18ed..928df59 100644
--- a/sound/pci/hda/patch_intelhdmi.c
+++ b/sound/pci/hda/patch_intelhdmi.c
@@ -33,15 +33,41 @@
 #include "hda_codec.h"
 #include "hda_local.h"
 
-static hda_nid_t cvt_nid;	/* audio converter */
-static hda_nid_t pin_nid;	/* HDMI output pin */
+/*
+ * The HDMI/DisplayPort configuration can be highly dynamic. A graphics device
+ * could support two independent pipes, each of them can be connected to one or
+ * more ports (DVI, HDMI or DisplayPort).
+ *
+ * The HDA correspondence of pipes/ports are converter/pin nodes.
+ */
+#define INTEL_HDMI_CVTS	2
+#define INTEL_HDMI_PINS	3
 
-#define INTEL_HDMI_EVENT_TAG		0x08
+static char *intel_hdmi_pcm_names[INTEL_HDMI_CVTS] = {
+	"INTEL HDMI 0",
+	"INTEL HDMI 1",
+};
 
 struct intel_hdmi_spec {
-	struct hda_multi_out multiout;
-	struct hda_pcm pcm_rec;
-	struct hdmi_eld sink_eld;
+	int num_cvts;
+	int num_pins;
+	hda_nid_t cvt[INTEL_HDMI_CVTS+1];  /* audio sources */
+	hda_nid_t pin[INTEL_HDMI_PINS+1];  /* audio sinks */
+
+	/*
+	 * source connection for each pin
+	 */
+	hda_nid_t pin_cvt[INTEL_HDMI_PINS+1];
+
+	/*
+	 * HDMI sink attached to each pin
+	 */
+	struct hdmi_eld sink_eld[INTEL_HDMI_PINS];
+
+	/*
+	 * export one pcm per pipe
+	 */
+	struct hda_pcm	pcm_rec[INTEL_HDMI_CVTS];
 };
 
 struct hdmi_audio_infoframe {
@@ -184,40 +210,186 @@
 { .ca_index = 0x31,  .speakers = { FRW,  FLW,  RR,  RL,  FC,  LFE,  FR,  FL } },
 };
 
+
+/*
+ * HDA/HDMI auto parsing
+ */
+
+static int hda_node_index(hda_nid_t *nids, hda_nid_t nid)
+{
+	int i;
+
+	for (i = 0; nids[i]; i++)
+		if (nids[i] == nid)
+			return i;
+
+	snd_printk(KERN_WARNING "HDMI: nid %d not registered\n", nid);
+	return -EINVAL;
+}
+
+static int intel_hdmi_read_pin_conn(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	struct intel_hdmi_spec *spec = codec->spec;
+	hda_nid_t conn_list[HDA_MAX_CONNECTIONS];
+	int conn_len, curr;
+	int index;
+
+	if (!(get_wcaps(codec, pin_nid) & AC_WCAP_CONN_LIST)) {
+		snd_printk(KERN_WARNING
+			   "HDMI: pin %d wcaps %#x "
+			   "does not support connection list\n",
+			   pin_nid, get_wcaps(codec, pin_nid));
+		return -EINVAL;
+	}
+
+	conn_len = snd_hda_get_connections(codec, pin_nid, conn_list,
+					   HDA_MAX_CONNECTIONS);
+	if (conn_len > 1)
+		curr = snd_hda_codec_read(codec, pin_nid, 0,
+					  AC_VERB_GET_CONNECT_SEL, 0);
+	else
+		curr = 0;
+
+	index = hda_node_index(spec->pin, pin_nid);
+	if (index < 0)
+		return -EINVAL;
+
+	spec->pin_cvt[index] = conn_list[curr];
+
+	return 0;
+}
+
+static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid,
+			      struct hdmi_eld *eld)
+{
+	if (!snd_hdmi_get_eld(eld, codec, pin_nid))
+		snd_hdmi_show_eld(eld);
+}
+
+static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid,
+			       struct hdmi_eld *eld)
+{
+	int present = snd_hda_pin_sense(codec, pin_nid);
+
+	eld->monitor_present	= !!(present & AC_PINSENSE_PRESENCE);
+	eld->eld_valid		= !!(present & AC_PINSENSE_ELDV);
+
+	if (present & AC_PINSENSE_ELDV)
+		hdmi_get_show_eld(codec, pin_nid, eld);
+}
+
+static int intel_hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid)
+{
+	struct intel_hdmi_spec *spec = codec->spec;
+
+	if (spec->num_pins >= INTEL_HDMI_PINS) {
+		snd_printk(KERN_WARNING
+			   "HDMI: no space for pin %d \n", pin_nid);
+		return -EINVAL;
+	}
+
+	hdmi_present_sense(codec, pin_nid, &spec->sink_eld[spec->num_pins]);
+
+	spec->pin[spec->num_pins] = pin_nid;
+	spec->num_pins++;
+
+	/*
+	 * It is assumed that converter nodes come first in the node list and
+	 * hence have been registered and usable now.
+	 */
+	return intel_hdmi_read_pin_conn(codec, pin_nid);
+}
+
+static int intel_hdmi_add_cvt(struct hda_codec *codec, hda_nid_t nid)
+{
+	struct intel_hdmi_spec *spec = codec->spec;
+
+	if (spec->num_cvts >= INTEL_HDMI_CVTS) {
+		snd_printk(KERN_WARNING
+			   "HDMI: no space for converter %d \n", nid);
+		return -EINVAL;
+	}
+
+	spec->cvt[spec->num_cvts] = nid;
+	spec->num_cvts++;
+
+	return 0;
+}
+
+static int intel_hdmi_parse_codec(struct hda_codec *codec)
+{
+	hda_nid_t nid;
+	int i, nodes;
+
+	nodes = snd_hda_get_sub_nodes(codec, codec->afg, &nid);
+	if (!nid || nodes < 0) {
+		snd_printk(KERN_WARNING "HDMI: failed to get afg sub nodes\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < nodes; i++, nid++) {
+		unsigned int caps;
+		unsigned int type;
+
+		caps = snd_hda_param_read(codec, nid, AC_PAR_AUDIO_WIDGET_CAP);
+		type = get_wcaps_type(caps);
+
+		if (!(caps & AC_WCAP_DIGITAL))
+			continue;
+
+		switch (type) {
+		case AC_WID_AUD_OUT:
+			if (intel_hdmi_add_cvt(codec, nid) < 0)
+				return -EINVAL;
+			break;
+		case AC_WID_PIN:
+			caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+			if (!(caps & AC_PINCAP_HDMI))
+				continue;
+			if (intel_hdmi_add_pin(codec, nid) < 0)
+				return -EINVAL;
+			break;
+		}
+	}
+
+	return 0;
+}
+
 /*
  * HDMI routines
  */
 
 #ifdef BE_PARANOID
-static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t nid,
+static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
 				int *packet_index, int *byte_index)
 {
 	int val;
 
-	val = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_INDEX, 0);
+	val = snd_hda_codec_read(codec, pin_nid, 0,
+				 AC_VERB_GET_HDMI_DIP_INDEX, 0);
 
 	*packet_index = val >> 5;
 	*byte_index = val & 0x1f;
 }
 #endif
 
-static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t nid,
+static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t pin_nid,
 				int packet_index, int byte_index)
 {
 	int val;
 
 	val = (packet_index << 5) | (byte_index & 0x1f);
 
-	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
 }
 
-static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t nid,
+static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t pin_nid,
 				unsigned char val)
 {
-	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
+	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
 }
 
-static void hdmi_enable_output(struct hda_codec *codec)
+static void hdmi_enable_output(struct hda_codec *codec, hda_nid_t pin_nid)
 {
 	/* Unmute */
 	if (get_wcaps(codec, pin_nid) & AC_WCAP_OUT_AMP)
@@ -231,7 +403,8 @@
 /*
  * Enable Audio InfoFrame Transmission
  */
-static void hdmi_start_infoframe_trans(struct hda_codec *codec)
+static void hdmi_start_infoframe_trans(struct hda_codec *codec,
+				       hda_nid_t pin_nid)
 {
 	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
 	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
@@ -241,59 +414,49 @@
 /*
  * Disable Audio InfoFrame Transmission
  */
-static void hdmi_stop_infoframe_trans(struct hda_codec *codec)
+static void hdmi_stop_infoframe_trans(struct hda_codec *codec,
+				      hda_nid_t pin_nid)
 {
 	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
 	snd_hda_codec_write(codec, pin_nid, 0, AC_VERB_SET_HDMI_DIP_XMIT,
 						AC_DIPXMIT_DISABLE);
 }
 
-static int hdmi_get_channel_count(struct hda_codec *codec)
+static int hdmi_get_channel_count(struct hda_codec *codec, hda_nid_t nid)
 {
-	return 1 + snd_hda_codec_read(codec, cvt_nid, 0,
+	return 1 + snd_hda_codec_read(codec, nid, 0,
 					AC_VERB_GET_CVT_CHAN_COUNT, 0);
 }
 
-static void hdmi_set_channel_count(struct hda_codec *codec, int chs)
+static void hdmi_set_channel_count(struct hda_codec *codec,
+				   hda_nid_t nid, int chs)
 {
-	snd_hda_codec_write(codec, cvt_nid, 0,
-					AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
-
-	if (chs != hdmi_get_channel_count(codec))
-		snd_printd(KERN_INFO "HDMI channel count: expect %d, get %d\n",
-					chs, hdmi_get_channel_count(codec));
+	if (chs != hdmi_get_channel_count(codec, nid))
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
 }
 
-static void hdmi_debug_channel_mapping(struct hda_codec *codec)
+static void hdmi_debug_channel_mapping(struct hda_codec *codec, hda_nid_t nid)
 {
 #ifdef CONFIG_SND_DEBUG_VERBOSE
 	int i;
 	int slot;
 
 	for (i = 0; i < 8; i++) {
-		slot = snd_hda_codec_read(codec, cvt_nid, 0,
+		slot = snd_hda_codec_read(codec, nid, 0,
 						AC_VERB_GET_HDMI_CHAN_SLOT, i);
 		printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
-						slot >> 4, slot & 0x7);
+						slot >> 4, slot & 0xf);
 	}
 #endif
 }
 
-static void hdmi_parse_eld(struct hda_codec *codec)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
-	struct hdmi_eld *eld = &spec->sink_eld;
-
-	if (!snd_hdmi_get_eld(eld, codec, pin_nid))
-		snd_hdmi_show_eld(eld);
-}
-
 
 /*
  * Audio InfoFrame routines
  */
 
-static void hdmi_debug_dip_size(struct hda_codec *codec)
+static void hdmi_debug_dip_size(struct hda_codec *codec, hda_nid_t pin_nid)
 {
 #ifdef CONFIG_SND_DEBUG_VERBOSE
 	int i;
@@ -310,7 +473,7 @@
 #endif
 }
 
-static void hdmi_clear_dip_buffers(struct hda_codec *codec)
+static void hdmi_clear_dip_buffers(struct hda_codec *codec, hda_nid_t pin_nid)
 {
 #ifdef BE_PARANOID
 	int i, j;
@@ -339,23 +502,35 @@
 #endif
 }
 
-static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
-					struct hdmi_audio_infoframe *ai)
+static void hdmi_checksum_audio_infoframe(struct hdmi_audio_infoframe *ai)
 {
-	u8 *params = (u8 *)ai;
+	u8 *bytes = (u8 *)ai;
 	u8 sum = 0;
 	int i;
 
-	hdmi_debug_dip_size(codec);
-	hdmi_clear_dip_buffers(codec); /* be paranoid */
+	ai->checksum = 0;
 
-	for (i = 0; i < sizeof(ai); i++)
-		sum += params[i];
+	for (i = 0; i < sizeof(*ai); i++)
+		sum += bytes[i];
+
 	ai->checksum = - sum;
+}
+
+static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
+				      hda_nid_t pin_nid,
+				      struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	int i;
+
+	hdmi_debug_dip_size(codec, pin_nid);
+	hdmi_clear_dip_buffers(codec, pin_nid); /* be paranoid */
+
+	hdmi_checksum_audio_infoframe(ai);
 
 	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
-	for (i = 0; i < sizeof(ai); i++)
-		hdmi_write_dip_byte(codec, pin_nid, params[i]);
+	for (i = 0; i < sizeof(*ai); i++)
+		hdmi_write_dip_byte(codec, pin_nid, bytes[i]);
 }
 
 /*
@@ -386,11 +561,11 @@
  *
  * TODO: it could select the wrong CA from multiple candidates.
 */
-static int hdmi_setup_channel_allocation(struct hda_codec *codec,
+static int hdmi_setup_channel_allocation(struct hda_codec *codec, hda_nid_t nid,
 					 struct hdmi_audio_infoframe *ai)
 {
 	struct intel_hdmi_spec *spec = codec->spec;
-	struct hdmi_eld *eld = &spec->sink_eld;
+	struct hdmi_eld *eld;
 	int i;
 	int spk_mask = 0;
 	int channels = 1 + (ai->CC02_CT47 & 0x7);
@@ -402,6 +577,11 @@
 	if (channels <= 2)
 		return 0;
 
+	i = hda_node_index(spec->pin_cvt, nid);
+	if (i < 0)
+		return 0;
+	eld = &spec->sink_eld[i];
+
 	/*
 	 * HDMI sink's ELD info cannot always be retrieved for now, e.g.
 	 * in console or for audio devices. Assume the highest speakers
@@ -439,8 +619,8 @@
 	return ai->CA;
 }
 
-static void hdmi_setup_channel_mapping(struct hda_codec *codec,
-					struct hdmi_audio_infoframe *ai)
+static void hdmi_setup_channel_mapping(struct hda_codec *codec, hda_nid_t nid,
+				       struct hdmi_audio_infoframe *ai)
 {
 	int i;
 
@@ -453,17 +633,41 @@
 	 */
 
 	for (i = 0; i < 8; i++)
-		snd_hda_codec_write(codec, cvt_nid, 0,
+		snd_hda_codec_write(codec, nid, 0,
 				    AC_VERB_SET_HDMI_CHAN_SLOT,
 				    (i << 4) | i);
 
-	hdmi_debug_channel_mapping(codec);
+	hdmi_debug_channel_mapping(codec, nid);
 }
 
+static bool hdmi_infoframe_uptodate(struct hda_codec *codec, hda_nid_t pin_nid,
+				    struct hdmi_audio_infoframe *ai)
+{
+	u8 *bytes = (u8 *)ai;
+	u8 val;
+	int i;
 
-static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
+	if (snd_hda_codec_read(codec, pin_nid, 0, AC_VERB_GET_HDMI_DIP_XMIT, 0)
+							    != AC_DIPXMIT_BEST)
+		return false;
+
+	hdmi_set_dip_index(codec, pin_nid, 0x0, 0x0);
+	for (i = 0; i < sizeof(*ai); i++) {
+		val = snd_hda_codec_read(codec, pin_nid, 0,
+					 AC_VERB_GET_HDMI_DIP_DATA, 0);
+		if (val != bytes[i])
+			return false;
+	}
+
+	return true;
+}
+
+static void hdmi_setup_audio_infoframe(struct hda_codec *codec, hda_nid_t nid,
 					struct snd_pcm_substream *substream)
 {
+	struct intel_hdmi_spec *spec = codec->spec;
+	hda_nid_t pin_nid;
+	int i;
 	struct hdmi_audio_infoframe ai = {
 		.type		= 0x84,
 		.ver		= 0x01,
@@ -471,11 +675,22 @@
 		.CC02_CT47	= substream->runtime->channels - 1,
 	};
 
-	hdmi_setup_channel_allocation(codec, &ai);
-	hdmi_setup_channel_mapping(codec, &ai);
+	hdmi_setup_channel_allocation(codec, nid, &ai);
+	hdmi_setup_channel_mapping(codec, nid, &ai);
 
-	hdmi_fill_audio_infoframe(codec, &ai);
-	hdmi_start_infoframe_trans(codec);
+	for (i = 0; i < spec->num_pins; i++) {
+		if (spec->pin_cvt[i] != nid)
+			continue;
+		if (!spec->sink_eld[i].monitor_present)
+			continue;
+
+		pin_nid = spec->pin[i];
+		if (!hdmi_infoframe_uptodate(codec, pin_nid, &ai)) {
+			hdmi_stop_infoframe_trans(codec, pin_nid);
+			hdmi_fill_audio_infoframe(codec, pin_nid, &ai);
+			hdmi_start_infoframe_trans(codec, pin_nid);
+		}
+	}
 }
 
 
@@ -485,27 +700,39 @@
 
 static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
 {
+	struct intel_hdmi_spec *spec = codec->spec;
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
 	int pind = !!(res & AC_UNSOL_RES_PD);
 	int eldv = !!(res & AC_UNSOL_RES_ELDV);
+	int index;
 
 	printk(KERN_INFO
-		"HDMI hot plug event: Presence_Detect=%d ELD_Valid=%d\n",
-		pind, eldv);
+		"HDMI hot plug event: Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
+		tag, pind, eldv);
+
+	index = hda_node_index(spec->pin, tag);
+	if (index < 0)
+		return;
+
+	spec->sink_eld[index].monitor_present = pind;
+	spec->sink_eld[index].eld_valid = eldv;
 
 	if (pind && eldv) {
-		hdmi_parse_eld(codec);
+		hdmi_get_show_eld(codec, spec->pin[index], &spec->sink_eld[index]);
 		/* TODO: do real things about ELD */
 	}
 }
 
 static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
 {
+	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
 	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
 	int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
 	int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
 
 	printk(KERN_INFO
-		"HDMI content protection event: SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
+		"HDMI CP event: PIN=%d SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
+		tag,
 		subtag,
 		cp_state,
 		cp_ready);
@@ -520,10 +747,11 @@
 
 static void intel_hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
 {
+	struct intel_hdmi_spec *spec = codec->spec;
 	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
 	int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
 
-	if (tag != INTEL_HDMI_EVENT_TAG) {
+	if (hda_node_index(spec->pin, tag) < 0) {
 		snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
 		return;
 	}
@@ -538,24 +766,29 @@
  * Callbacks
  */
 
-static int intel_hdmi_playback_pcm_open(struct hda_pcm_stream *hinfo,
-					struct hda_codec *codec,
-					struct snd_pcm_substream *substream)
+static void hdmi_setup_stream(struct hda_codec *codec, hda_nid_t nid,
+			      u32 stream_tag, int format)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	int tag;
+	int fmt;
 
-	return snd_hda_multi_out_dig_open(codec, &spec->multiout);
-}
+	tag = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONV, 0) >> 4;
+	fmt = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_STREAM_FORMAT, 0);
 
-static int intel_hdmi_playback_pcm_close(struct hda_pcm_stream *hinfo,
-					 struct hda_codec *codec,
-					 struct snd_pcm_substream *substream)
-{
-	struct intel_hdmi_spec *spec = codec->spec;
+	snd_printdd("hdmi_setup_stream: "
+		    "NID=0x%x, %sstream=0x%x, %sformat=0x%x\n",
+		    nid,
+		    tag == stream_tag ? "" : "new-",
+		    stream_tag,
+		    fmt == format ? "" : "new-",
+		    format);
 
-	hdmi_stop_infoframe_trans(codec);
-
-	return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+	if (tag != stream_tag)
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_CHANNEL_STREAMID, stream_tag << 4);
+	if (fmt != format)
+		snd_hda_codec_write(codec, nid, 0,
+				    AC_VERB_SET_STREAM_FORMAT, format);
 }
 
 static int intel_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
@@ -564,43 +797,53 @@
 					   unsigned int format,
 					   struct snd_pcm_substream *substream)
 {
-	struct intel_hdmi_spec *spec = codec->spec;
+	hdmi_set_channel_count(codec, hinfo->nid,
+			       substream->runtime->channels);
 
-	snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
-					     format, substream);
+	hdmi_setup_audio_infoframe(codec, hinfo->nid, substream);
 
-	hdmi_set_channel_count(codec, substream->runtime->channels);
+	hdmi_setup_stream(codec, hinfo->nid, stream_tag, format);
+	return 0;
+}
 
-	hdmi_setup_audio_infoframe(codec, substream);
-
+static int intel_hdmi_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
+					   struct hda_codec *codec,
+					   struct snd_pcm_substream *substream)
+{
 	return 0;
 }
 
 static struct hda_pcm_stream intel_hdmi_pcm_playback = {
 	.substreams = 1,
 	.channels_min = 2,
-	.channels_max = 8,
 	.ops = {
-		.open    = intel_hdmi_playback_pcm_open,
-		.close   = intel_hdmi_playback_pcm_close,
-		.prepare = intel_hdmi_playback_pcm_prepare
+		.prepare = intel_hdmi_playback_pcm_prepare,
+		.cleanup = intel_hdmi_playback_pcm_cleanup,
 	},
 };
 
 static int intel_hdmi_build_pcms(struct hda_codec *codec)
 {
 	struct intel_hdmi_spec *spec = codec->spec;
-	struct hda_pcm *info = &spec->pcm_rec;
+	struct hda_pcm *info = spec->pcm_rec;
+	int i;
 
-	codec->num_pcms = 1;
+	codec->num_pcms = spec->num_cvts;
 	codec->pcm_info = info;
 
-	/* NID to query formats and rates and setup streams */
-	intel_hdmi_pcm_playback.nid = cvt_nid;
+	for (i = 0; i < codec->num_pcms; i++, info++) {
+		unsigned int chans;
 
-	info->name = "INTEL HDMI";
-	info->pcm_type = HDA_PCM_TYPE_HDMI;
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = intel_hdmi_pcm_playback;
+		chans = get_wcaps(codec, spec->cvt[i]);
+		chans = get_wcaps_channels(chans);
+
+		info->name = intel_hdmi_pcm_names[i];
+		info->pcm_type = HDA_PCM_TYPE_HDMI;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+							intel_hdmi_pcm_playback;
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->cvt[i];
+		info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = chans;
+	}
 
 	return 0;
 }
@@ -609,29 +852,39 @@
 {
 	struct intel_hdmi_spec *spec = codec->spec;
 	int err;
+	int i;
 
-	err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
-	if (err < 0)
-		return err;
+	for (i = 0; i < codec->num_pcms; i++) {
+		err = snd_hda_create_spdif_out_ctls(codec, spec->cvt[i]);
+		if (err < 0)
+			return err;
+	}
 
 	return 0;
 }
 
 static int intel_hdmi_init(struct hda_codec *codec)
 {
-	hdmi_enable_output(codec);
+	struct intel_hdmi_spec *spec = codec->spec;
+	int i;
 
-	snd_hda_codec_write(codec, pin_nid, 0,
-			    AC_VERB_SET_UNSOLICITED_ENABLE,
-			    AC_USRSP_EN | INTEL_HDMI_EVENT_TAG);
+	for (i = 0; spec->pin[i]; i++) {
+		hdmi_enable_output(codec, spec->pin[i]);
+		snd_hda_codec_write(codec, spec->pin[i], 0,
+				    AC_VERB_SET_UNSOLICITED_ENABLE,
+				    AC_USRSP_EN | spec->pin[i]);
+	}
 	return 0;
 }
 
 static void intel_hdmi_free(struct hda_codec *codec)
 {
 	struct intel_hdmi_spec *spec = codec->spec;
+	int i;
 
-	snd_hda_eld_proc_free(codec, &spec->sink_eld);
+	for (i = 0; i < spec->num_pins; i++)
+		snd_hda_eld_proc_free(codec, &spec->sink_eld[i]);
+
 	kfree(spec);
 }
 
@@ -643,49 +896,38 @@
 	.unsol_event		= intel_hdmi_unsol_event,
 };
 
-static int do_patch_intel_hdmi(struct hda_codec *codec)
+static int patch_intel_hdmi(struct hda_codec *codec)
 {
 	struct intel_hdmi_spec *spec;
+	int i;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
 		return -ENOMEM;
 
-	spec->multiout.num_dacs = 0;	  /* no analog */
-	spec->multiout.max_channels = 8;
-	spec->multiout.dig_out_nid = cvt_nid;
-
 	codec->spec = spec;
+	if (intel_hdmi_parse_codec(codec) < 0) {
+		codec->spec = NULL;
+		kfree(spec);
+		return -EINVAL;
+	}
 	codec->patch_ops = intel_hdmi_patch_ops;
 
-	snd_hda_eld_proc_new(codec, &spec->sink_eld);
+	for (i = 0; i < spec->num_pins; i++)
+		snd_hda_eld_proc_new(codec, &spec->sink_eld[i], i);
 
 	init_channel_allocations();
 
 	return 0;
 }
 
-static int patch_intel_hdmi(struct hda_codec *codec)
-{
-	cvt_nid = 0x02;
-	pin_nid = 0x03;
-	return do_patch_intel_hdmi(codec);
-}
-
-static int patch_intel_hdmi_ibexpeak(struct hda_codec *codec)
-{
-	cvt_nid = 0x02;
-	pin_nid = 0x04;
-	return do_patch_intel_hdmi(codec);
-}
-
 static struct hda_codec_preset snd_hda_preset_intelhdmi[] = {
 	{ .id = 0x808629fb, .name = "G45 DEVCL",  .patch = patch_intel_hdmi },
 	{ .id = 0x80862801, .name = "G45 DEVBLC", .patch = patch_intel_hdmi },
 	{ .id = 0x80862802, .name = "G45 DEVCTG", .patch = patch_intel_hdmi },
 	{ .id = 0x80862803, .name = "G45 DEVELK", .patch = patch_intel_hdmi },
 	{ .id = 0x80862804, .name = "G45 DEVIBX", .patch = patch_intel_hdmi },
-	{ .id = 0x80860054, .name = "Q57 DEVIBX", .patch = patch_intel_hdmi_ibexpeak },
+	{ .id = 0x80860054, .name = "Q57 DEVIBX", .patch = patch_intel_hdmi },
 	{ .id = 0x10951392, .name = "SiI1392 HDMI",     .patch = patch_intel_hdmi },
 	{} /* terminator */
 };
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7058371..d967836 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -961,18 +961,12 @@
 static void alc_automute_pin(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int present, pincap;
 	unsigned int nid = spec->autocfg.hp_pins[0];
 	int i;
 
 	if (!nid)
 		return;
-	pincap = snd_hda_query_pin_caps(codec, nid);
-	if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
-		snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, nid, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+	spec->jack_present = snd_hda_jack_detect(codec, nid);
 	for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
 		nid = spec->autocfg.speaker_pins[i];
 		if (!nid)
@@ -1012,9 +1006,7 @@
 
 	cap_nid = spec->capsrc_nids ? spec->capsrc_nids[0] : spec->adc_nids[0];
 
-	present = snd_hda_codec_read(codec, spec->ext_mic.pin, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	present &= AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, spec->ext_mic.pin);
 	if (present) {
 		alive = &spec->ext_mic;
 		dead = &spec->int_mic;
@@ -1402,6 +1394,17 @@
 		add_verb(codec->spec, fix->verbs);
 }
 
+static int alc_read_coef_idx(struct hda_codec *codec,
+			unsigned int coef_idx)
+{
+	unsigned int val;
+	snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX,
+		    		coef_idx);
+	val = snd_hda_codec_read(codec, 0x20, 0,
+			 	AC_VERB_GET_PROC_COEF, 0);
+	return val;
+}
+
 /*
  * ALC888
  */
@@ -1513,7 +1516,7 @@
 static void alc_automute_amp(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int val, mute, pincap;
+	unsigned int mute;
 	hda_nid_t nid;
 	int i;
 
@@ -1522,13 +1525,7 @@
 		nid = spec->autocfg.hp_pins[i];
 		if (!nid)
 			break;
-		pincap = snd_hda_query_pin_caps(codec, nid);
-		if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
-			snd_hda_codec_read(codec, nid, 0,
-					   AC_VERB_SET_PIN_SENSE, 0);
-		val = snd_hda_codec_read(codec, nid, 0,
-					 AC_VERB_GET_PIN_SENSE, 0);
-		if (val & AC_PINSENSE_PRESENCE) {
+		if (snd_hda_jack_detect(codec, nid)) {
 			spec->jack_present = 1;
 			break;
 		}
@@ -1786,6 +1783,8 @@
 
 	spec->autocfg.hp_pins[0] = 0x15;
 	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x17;
 }
 
 static void alc888_acer_aspire_6530g_setup(struct hda_codec *codec)
@@ -2410,12 +2409,14 @@
 
 static void alc_free_kctls(struct hda_codec *codec);
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
 /* additional beep mixers; the actual parameters are overwritten at build */
 static struct snd_kcontrol_new alc_beep_mixer[] = {
 	HDA_CODEC_VOLUME("Beep Playback Volume", 0, 0, HDA_INPUT),
-	HDA_CODEC_MUTE("Beep Playback Switch", 0, 0, HDA_INPUT),
+	HDA_CODEC_MUTE_BEEP("Beep Playback Switch", 0, 0, HDA_INPUT),
 	{ } /* end */
 };
+#endif
 
 static int alc_build_controls(struct hda_codec *codec)
 {
@@ -2452,6 +2453,7 @@
 			return err;
 	}
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
 	/* create beep controls if needed */
 	if (spec->beep_amp) {
 		struct snd_kcontrol_new *knew;
@@ -2461,11 +2463,13 @@
 			if (!kctl)
 				return -ENOMEM;
 			kctl->private_value = spec->beep_amp;
-			err = snd_hda_ctl_add(codec, kctl);
+			err = snd_hda_ctl_add(codec,
+					get_amp_nid_(spec->beep_amp), kctl);
 			if (err < 0)
 				return err;
 		}
 	}
+#endif
 
 	/* if we have no master control, let's create it */
 	if (!spec->no_analog &&
@@ -2779,8 +2783,7 @@
  	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x18, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x18);
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
 }
@@ -3480,7 +3483,7 @@
 	snprintf(spec->stream_name_analog, sizeof(spec->stream_name_analog),
 		 "%s Analog", codec->chip_name);
 	info->name = spec->stream_name_analog;
-	
+
 	if (spec->stream_analog_playback) {
 		if (snd_BUG_ON(!spec->multiout.dac_nids))
 			return -EINVAL;
@@ -4322,10 +4325,26 @@
 	knew->name = kstrdup(name, GFP_KERNEL);
 	if (!knew->name)
 		return -ENOMEM;
+	if (get_amp_nid_(val))
+		knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
 	knew->private_value = val;
 	return 0;
 }
 
+static int add_control_with_pfx(struct alc_spec *spec, int type,
+				const char *pfx, const char *dir,
+				const char *sfx, unsigned long val)
+{
+	char name[32];
+	snprintf(name, sizeof(name), "%s %s %s", pfx, dir, sfx);
+	return add_control(spec, type, name, val);
+}
+
+#define add_pb_vol_ctrl(spec, type, pfx, val) \
+	add_control_with_pfx(spec, type, pfx, "Playback", "Volume", val)
+#define add_pb_sw_ctrl(spec, type, pfx, val) \
+	add_control_with_pfx(spec, type, pfx, "Playback", "Switch", val)
+
 #define alc880_is_fixed_pin(nid)	((nid) >= 0x14 && (nid) <= 0x17)
 #define alc880_fixed_pin_idx(nid)	((nid) - 0x14)
 #define alc880_is_multi_pin(nid)	((nid) >= 0x18)
@@ -4379,7 +4398,6 @@
 static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec,
 					     const struct auto_pin_cfg *cfg)
 {
-	char name[32];
 	static const char *chname[4] = {
 		"Front", "Surround", NULL /*CLFE*/, "Side"
 	};
@@ -4392,26 +4410,26 @@
 		nid = alc880_idx_to_mixer(alc880_dac_to_idx(spec->multiout.dac_nids[i]));
 		if (i == 2) {
 			/* Center/LFE */
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "Center Playback Volume",
+			err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL,
+					      "Center",
 					  HDA_COMPOSE_AMP_VAL(nid, 1, 0,
 							      HDA_OUTPUT));
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "LFE Playback Volume",
+			err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL,
+					      "LFE",
 					  HDA_COMPOSE_AMP_VAL(nid, 2, 0,
 							      HDA_OUTPUT));
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_BIND_MUTE,
-					  "Center Playback Switch",
+			err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE,
+					     "Center",
 					  HDA_COMPOSE_AMP_VAL(nid, 1, 2,
 							      HDA_INPUT));
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_BIND_MUTE,
-					  "LFE Playback Switch",
+			err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE,
+					     "LFE",
 					  HDA_COMPOSE_AMP_VAL(nid, 2, 2,
 							      HDA_INPUT));
 			if (err < 0)
@@ -4423,14 +4441,12 @@
 				pfx = "Speaker";
 			else
 				pfx = chname[i];
-			sprintf(name, "%s Playback Volume", pfx);
-			err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+			err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx,
 					  HDA_COMPOSE_AMP_VAL(nid, 3, 0,
 							      HDA_OUTPUT));
 			if (err < 0)
 				return err;
-			sprintf(name, "%s Playback Switch", pfx);
-			err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+			err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE, pfx,
 					  HDA_COMPOSE_AMP_VAL(nid, 3, 2,
 							      HDA_INPUT));
 			if (err < 0)
@@ -4446,7 +4462,6 @@
 {
 	hda_nid_t nid;
 	int err;
-	char name[32];
 
 	if (!pin)
 		return 0;
@@ -4460,21 +4475,18 @@
 			spec->multiout.extra_out_nid[0] = nid;
 		/* control HP volume/switch on the output mixer amp */
 		nid = alc880_idx_to_mixer(alc880_fixed_pin_idx(pin));
-		sprintf(name, "%s Playback Volume", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+		err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx,
 				  HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
 		if (err < 0)
 			return err;
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+		err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE, pfx,
 				  HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT));
 		if (err < 0)
 			return err;
 	} else if (alc880_is_multi_pin(pin)) {
 		/* set manual connection */
 		/* we have only a switch on HP-out PIN */
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+		err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx,
 				  HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
 		if (err < 0)
 			return err;
@@ -4487,16 +4499,13 @@
 			    const char *ctlname,
 			    int idx, hda_nid_t mix_nid)
 {
-	char name[32];
 	int err;
 
-	sprintf(name, "%s Playback Volume", ctlname);
-	err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+	err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, ctlname,
 			  HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT));
 	if (err < 0)
 		return err;
-	sprintf(name, "%s Playback Switch", ctlname);
-	err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+	err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, ctlname,
 			  HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT));
 	if (err < 0)
 		return err;
@@ -4773,8 +4782,12 @@
 	}
 }
 
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
 #define set_beep_amp(spec, nid, idx, dir) \
 	((spec)->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 3, idx, dir))
+#else
+#define set_beep_amp(spec, nid, idx, dir) /* NOP */
+#endif
 
 /*
  * OK, here we have finally the patch for ALC880
@@ -5087,11 +5100,8 @@
 static void alc260_hp_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x10, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+	spec->jack_present = snd_hda_jack_detect(codec, 0x10);
 	alc260_hp_master_update(codec, 0x0f, 0x10, 0x11);
 }
 
@@ -5156,11 +5166,8 @@
 static void alc260_hp_3013_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+	spec->jack_present = snd_hda_jack_detect(codec, 0x15);
 	alc260_hp_master_update(codec, 0x15, 0x10, 0x11);
 }
 
@@ -5173,12 +5180,8 @@
 
 static void alc260_hp_3012_automute(struct hda_codec *codec)
 {
-	unsigned int present, bits;
+	unsigned int bits = snd_hda_jack_detect(codec, 0x10) ? 0 : PIN_OUT;
 
-	present = snd_hda_codec_read(codec, 0x10, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE;
-
-	bits = present ? 0 : PIN_OUT;
 	snd_hda_codec_write(codec, 0x0f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
 			    bits);
 	snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
@@ -5748,8 +5751,7 @@
         unsigned int present;
 
 	/* speaker --> GPIO Data 0, hp or spdif --> GPIO data 1 */
-        present = snd_hda_codec_read(codec, 0x0f, 0,
-                                     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x0f);
 	if (present) {
 		snd_hda_codec_write_cache(codec, 0x01, 0,
 					  AC_VERB_SET_GPIO_DATA, 1);
@@ -5989,7 +5991,6 @@
 {
 	hda_nid_t nid_vol;
 	unsigned long vol_val, sw_val;
-	char name[32];
 	int err;
 
 	if (nid >= 0x0f && nid < 0x11) {
@@ -6009,14 +6010,12 @@
 
 	if (!(*vol_bits & (1 << nid_vol))) {
 		/* first control for the volume widget */
-		snprintf(name, sizeof(name), "%s Playback Volume", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_VOL, name, vol_val);
+		err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx, vol_val);
 		if (err < 0)
 			return err;
 		*vol_bits |= (1 << nid_vol);
 	}
-	snprintf(name, sizeof(name), "%s Playback Switch", pfx);
-	err = add_control(spec, ALC_CTL_WIDGET_MUTE, name, sw_val);
+	err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, sw_val);
 	if (err < 0)
 		return err;
 	return 1;
@@ -7336,8 +7335,8 @@
 	HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x01, HDA_INPUT),
 	HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x01, HDA_INPUT),
 	/* FIXME: this looks suspicious...
-	HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x02, HDA_INPUT),
-	HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_VOLUME("Beep Playback Volume", 0x0b, 0x02, HDA_INPUT),
+	HDA_CODEC_MUTE("Beep Playback Switch", 0x0b, 0x02, HDA_INPUT),
 	*/
 	{ } /* end */
 };
@@ -8184,12 +8183,8 @@
 /*
 static void alc883_mitac_mic_automute(struct hda_codec *codec)
 {
-	unsigned int present;
-	unsigned char bits;
+	unsigned char bits = snd_hda_jack_detect(codec, 0x18) ? HDA_AMP_MUTE : 0;
 
-	present = snd_hda_codec_read(codec, 0x18, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1, HDA_AMP_MUTE, bits);
 }
 */
@@ -8411,10 +8406,8 @@
 /* toggle front-jack and RCA according to the hp-jack state */
 static void alc888_lenovo_ms7195_front_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
+ 	unsigned int present = snd_hda_jack_detect(codec, 0x1b);
 
- 	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
 	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
@@ -8424,10 +8417,8 @@
 /* toggle RCA according to the front-jack state */
 static void alc888_lenovo_ms7195_rca_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
+ 	unsigned int present = snd_hda_jack_detect(codec, 0x14);
 
- 	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
@@ -8468,8 +8459,7 @@
 {
 	unsigned int present;
 
-	present = snd_hda_codec_read(codec, 0x18, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x18);
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 }
@@ -8520,24 +8510,16 @@
 
 static void alc883_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
+	int bits = snd_hda_jack_detect(codec, 0x14) ? HDA_AMP_MUTE : 0;
 
-	present = snd_hda_codec_read(codec, 0x14, 0, AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
-	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
 }
 
 static void alc883_lenovo_101e_all_automute(struct hda_codec *codec)
 {
- 	unsigned int present;
-	unsigned char bits;
+	int bits = snd_hda_jack_detect(codec, 0x1b) ? HDA_AMP_MUTE : 0;
 
- 	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
 	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
@@ -8688,8 +8670,7 @@
 	/* Mute only in 2ch or 4ch mode */
 	if (snd_hda_codec_read(codec, 0x15, 0, AC_VERB_GET_CONNECT_SEL, 0)
 	    == 0x00) {
-		present = snd_hda_codec_read(codec, 0x15, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & AC_PINSENSE_PRESENCE;
+		present = snd_hda_jack_detect(codec, 0x15);
 		snd_hda_codec_amp_stereo(codec, 0x14,  HDA_OUTPUT, 0,
 			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 		snd_hda_codec_amp_stereo(codec, 0x16, HDA_OUTPUT, 0,
@@ -10032,10 +10013,8 @@
 static void alc262_hp_bpc_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int presence;
-	presence = snd_hda_codec_read(codec, 0x1b, 0,
-				      AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = !!(presence & AC_PINSENSE_PRESENCE);
+
+	spec->jack_present = snd_hda_jack_detect(codec, 0x1b);
 	alc262_hp_master_update(codec);
 }
 
@@ -10049,10 +10028,8 @@
 static void alc262_hp_wildwest_automute(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
-	unsigned int presence;
-	presence = snd_hda_codec_read(codec, 0x15, 0,
-				      AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = !!(presence & AC_PINSENSE_PRESENCE);
+
+	spec->jack_present = snd_hda_jack_detect(codec, 0x15);
 	alc262_hp_master_update(codec);
 }
 
@@ -10286,13 +10263,8 @@
 {
 	struct alc_spec *spec = codec->spec;
 	hda_nid_t hp_nid = spec->autocfg.hp_pins[0];
-	unsigned int present;
 
-	/* need to execute and sync at first */
-	snd_hda_codec_read(codec, hp_nid, 0, AC_VERB_SET_PIN_SENSE, 0);
-	present = snd_hda_codec_read(codec, hp_nid, 0,
-				     AC_VERB_GET_PIN_SENSE, 0);
-	spec->jack_present = (present & 0x80000000) != 0;
+	spec->jack_present = snd_hda_jack_detect(codec, hp_nid);
 	alc262_hippo_master_update(codec);
 }
 
@@ -10618,21 +10590,8 @@
 	unsigned int mute;
 
 	if (force || !spec->sense_updated) {
-		unsigned int present;
-		/* need to execute and sync at first */
-		snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
-		/* check laptop HP jack */
-		present = snd_hda_codec_read(codec, 0x14, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		/* need to execute and sync at first */
-		snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-		/* check docking HP jack */
-		present |= snd_hda_codec_read(codec, 0x1b, 0,
-					      AC_VERB_GET_PIN_SENSE, 0);
-		if (present & AC_PINSENSE_PRESENCE)
-			spec->jack_present = 1;
-		else
-			spec->jack_present = 0;
+		spec->jack_present = snd_hda_jack_detect(codec, 0x14) ||
+				     snd_hda_jack_detect(codec, 0x1b);
 		spec->sense_updated = 1;
 	}
 	/* unmute internal speaker only if both HPs are unplugged and
@@ -10677,12 +10636,7 @@
 	unsigned int mute;
 
 	if (force || !spec->sense_updated) {
-		unsigned int present_int_hp;
-		/* need to execute and sync at first */
-		snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
-		present_int_hp = snd_hda_codec_read(codec, 0x1b, 0,
-					AC_VERB_GET_PIN_SENSE, 0);
-		spec->jack_present = (present_int_hp & 0x80000000) != 0;
+		spec->jack_present = snd_hda_jack_detect(codec, 0x1b);
 		spec->sense_updated = 1;
 	}
 	if (spec->jack_present) {
@@ -10874,12 +10828,7 @@
 	mute = 0;
 	/* auto-mute only when HP is used as HP */
 	if (!spec->cur_mux[0]) {
-		unsigned int present;
-		/* need to execute and sync at first */
-		snd_hda_codec_read(codec, 0x15, 0, AC_VERB_SET_PIN_SENSE, 0);
-		present = snd_hda_codec_read(codec, 0x15, 0,
-					     AC_VERB_GET_PIN_SENSE, 0);
-		spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
+		spec->jack_present = snd_hda_jack_detect(codec, 0x15);
 		if (spec->jack_present)
 			mute = HDA_AMP_MUTE;
 	}
@@ -10956,7 +10905,6 @@
 static int alc262_add_out_vol_ctl(struct alc_spec *spec, hda_nid_t nid,
 				  const char *pfx, int *vbits)
 {
-	char name[32];
 	unsigned long val;
 	int vbit;
 
@@ -10966,28 +10914,25 @@
 	if (*vbits & vbit) /* a volume control for this mixer already there */
 		return 0;
 	*vbits |= vbit;
-	snprintf(name, sizeof(name), "%s Playback Volume", pfx);
 	if (vbit == 2)
 		val = HDA_COMPOSE_AMP_VAL(0x0e, 2, 0, HDA_OUTPUT);
 	else
 		val = HDA_COMPOSE_AMP_VAL(0x0c, 3, 0, HDA_OUTPUT);
-	return add_control(spec, ALC_CTL_WIDGET_VOL, name, val);
+	return add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx, val);
 }
 
 static int alc262_add_out_sw_ctl(struct alc_spec *spec, hda_nid_t nid,
 				 const char *pfx)
 {
-	char name[32];
 	unsigned long val;
 
 	if (!nid)
 		return 0;
-	snprintf(name, sizeof(name), "%s Playback Switch", pfx);
 	if (nid == 0x16)
 		val = HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT);
 	else
 		val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
-	return add_control(spec, ALC_CTL_WIDGET_MUTE, name, val);
+	return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val);
 }
 
 /* add playback controls from the parsed DAC table */
@@ -11463,8 +11408,10 @@
 	SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
 	SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO),
 	SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO),
+#if 0 /* disable the quirk since model=auto works better in recent versions */
 	SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
 			   ALC262_SONY_ASSAMD),
+#endif
 	SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
 		      ALC262_TOSHIBA_RX1),
 	SND_PCI_QUIRK(0x1179, 0xff7b, "Toshiba S06", ALC262_TOSHIBA_S06),
@@ -11923,10 +11870,7 @@
 	unsigned int mute;
 
 	if (force || !spec->sense_updated) {
-		unsigned int present;
-		present = snd_hda_codec_read(codec, 0x14, 0,
-				    	 AC_VERB_GET_PIN_SENSE, 0);
-		spec->jack_present = (present & 0x80000000) != 0;
+		spec->jack_present = snd_hda_jack_detect(codec, 0x14);
 		spec->sense_updated = 1;
 	}
 	if (spec->jack_present)
@@ -12045,8 +11989,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x15);
 	bits = present ? AMP_IN_MUTE(0) : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0f, HDA_INPUT, 0,
 				AMP_IN_MUTE(0), bits);
@@ -12327,11 +12270,9 @@
 static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
 				    const char *ctlname, int idx)
 {
-	char name[32];
 	hda_nid_t dac;
 	int err;
 
-	sprintf(name, "%s Playback Volume", ctlname);
 	switch (nid) {
 	case 0x14:
 	case 0x16:
@@ -12345,7 +12286,7 @@
 	}
 	if (spec->multiout.dac_nids[0] != dac &&
 	    spec->multiout.dac_nids[1] != dac) {
-		err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+		err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, ctlname,
 				  HDA_COMPOSE_AMP_VAL(dac, 3, idx,
 						      HDA_OUTPUT));
 		if (err < 0)
@@ -12353,12 +12294,11 @@
 		spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
 	}
 
-	sprintf(name, "%s Playback Switch", ctlname);
 	if (nid != 0x16)
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+		err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, ctlname,
 			  HDA_COMPOSE_AMP_VAL(nid, 3, idx, HDA_OUTPUT));
 	else /* mono */
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+		err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, ctlname,
 			  HDA_COMPOSE_AMP_VAL(nid, 2, idx, HDA_OUTPUT));
 	if (err < 0)
 		return err;
@@ -12388,8 +12328,7 @@
 
 	nid = cfg->speaker_pins[0];
 	if (nid == 0x1d) {
-		err = add_control(spec, ALC_CTL_WIDGET_VOL,
-				  "Speaker Playback Volume",
+		err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, "Speaker",
 				  HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
 		if (err < 0)
 			return err;
@@ -12407,8 +12346,7 @@
 
 	nid = cfg->line_out_pins[1] | cfg->line_out_pins[2];
 	if (nid == 0x16) {
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE,
-				  "Mono Playback Switch",
+		err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, "Mono",
 				  HDA_COMPOSE_AMP_VAL(nid, 2, 0, HDA_OUTPUT));
 		if (err < 0)
 			return err;
@@ -13034,8 +12972,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x15);
 	bits = present ? AMP_IN_MUTE(0) : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
 			AMP_IN_MUTE(0), bits);
@@ -13060,12 +12997,10 @@
 	unsigned char bits;
 
 	/* Check laptop headphone socket */
-	present = snd_hda_codec_read(codec, 0x15, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x15);
 
 	/* Check port replicator headphone socket */
-	present |= snd_hda_codec_read(codec, 0x1a, 0,
-			AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present |= snd_hda_jack_detect(codec, 0x1a);
 
 	bits = present ? AMP_IN_MUTE(0) : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
@@ -13089,11 +13024,8 @@
 	unsigned int present_laptop;
 	unsigned int present_dock;
 
-	present_laptop = snd_hda_codec_read(codec, 0x18, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-
-	present_dock = snd_hda_codec_read(codec, 0x1b, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present_laptop	= snd_hda_jack_detect(codec, 0x18);
+	present_dock	= snd_hda_jack_detect(codec, 0x1b);
 
 	/* Laptop mic port overrides dock mic port, design decision */
 	if (present_dock)
@@ -13178,8 +13110,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x15);
 	bits = present ? AMP_IN_MUTE(0) : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
 				AMP_IN_MUTE(0), bits);
@@ -13525,6 +13456,15 @@
 
 	alc_fix_pll_init(codec, 0x20, 0x04, 15);
 
+	if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010){
+		kfree(codec->chip_name);
+		codec->chip_name = kstrdup("ALC259", GFP_KERNEL);
+		if (!codec->chip_name) {
+			alc_free(codec);
+			return -ENOMEM;
+		}
+	}
+
 	board_config = snd_hda_check_board_config(codec, ALC269_MODEL_LAST,
 						  alc269_models,
 						  alc269_cfg_tbl);
@@ -14157,10 +14097,8 @@
 /* toggle speaker-output according to the hp-jack state */
 static void alc861_toshiba_automute(struct hda_codec *codec)
 {
-	unsigned int present;
+	unsigned int present = snd_hda_jack_detect(codec, 0x0f);
 
-	present = snd_hda_codec_read(codec, 0x0f, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
 	snd_hda_codec_amp_stereo(codec, 0x16, HDA_INPUT, 0,
 				 HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
 	snd_hda_codec_amp_stereo(codec, 0x1a, HDA_INPUT, 3,
@@ -14260,9 +14198,7 @@
 static int alc861_create_out_sw(struct hda_codec *codec, const char *pfx,
 				hda_nid_t nid, unsigned int chs)
 {
-	char name[32];
-	snprintf(name, sizeof(name), "%s Playback Switch", pfx);
-	return add_control(codec->spec, ALC_CTL_WIDGET_MUTE, name,
+	return add_pb_sw_ctrl(codec->spec, ALC_CTL_WIDGET_MUTE, pfx,
 			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
 }
 
@@ -14627,6 +14563,27 @@
 	},
 };
 
+/* Pin config fixes */
+enum {
+	PINFIX_FSC_AMILO_PI1505,
+};
+
+static struct alc_pincfg alc861_fsc_amilo_pi1505_pinfix[] = {
+	{ 0x0b, 0x0221101f }, /* HP */
+	{ 0x0f, 0x90170310 }, /* speaker */
+	{ }
+};
+
+static const struct alc_fixup alc861_fixups[] = {
+	[PINFIX_FSC_AMILO_PI1505] = {
+		.pins = alc861_fsc_amilo_pi1505_pinfix
+	},
+};
+
+static struct snd_pci_quirk alc861_fixup_tbl[] = {
+	SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505),
+	{}
+};
 
 static int patch_alc861(struct hda_codec *codec)
 {
@@ -14650,6 +14607,8 @@
 		board_config = ALC861_AUTO;
 	}
 
+	alc_pick_fixup(codec, alc861_fixup_tbl, alc861_fixups);
+
 	if (board_config == ALC861_AUTO) {
 		/* automatic parse from the BIOS config */
 		err = alc861_parse_auto_config(codec);
@@ -15067,9 +15026,9 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x18, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x18);
 	bits = present ? HDA_AMP_MUTE : 0;
+
 	snd_hda_codec_amp_stereo(codec, 0x0b, HDA_INPUT, 1,
 				 HDA_AMP_MUTE, bits);
 }
@@ -15386,7 +15345,6 @@
 static int alc861vd_auto_create_multi_out_ctls(struct alc_spec *spec,
 					     const struct auto_pin_cfg *cfg)
 {
-	char name[32];
 	static const char *chname[4] = {"Front", "Surround", "CLFE", "Side"};
 	hda_nid_t nid_v, nid_s;
 	int i, err;
@@ -15403,26 +15361,26 @@
 
 		if (i == 2) {
 			/* Center/LFE */
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "Center Playback Volume",
+			err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL,
+					      "Center",
 					  HDA_COMPOSE_AMP_VAL(nid_v, 1, 0,
 							      HDA_OUTPUT));
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "LFE Playback Volume",
+			err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL,
+					      "LFE",
 					  HDA_COMPOSE_AMP_VAL(nid_v, 2, 0,
 							      HDA_OUTPUT));
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_BIND_MUTE,
-					  "Center Playback Switch",
+			err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE,
+					     "Center",
 					  HDA_COMPOSE_AMP_VAL(nid_s, 1, 2,
 							      HDA_INPUT));
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_BIND_MUTE,
-					  "LFE Playback Switch",
+			err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE,
+					     "LFE",
 					  HDA_COMPOSE_AMP_VAL(nid_s, 2, 2,
 							      HDA_INPUT));
 			if (err < 0)
@@ -15437,8 +15395,7 @@
 					pfx = "PCM";
 			} else
 				pfx = chname[i];
-			sprintf(name, "%s Playback Volume", pfx);
-			err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+			err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx,
 					  HDA_COMPOSE_AMP_VAL(nid_v, 3, 0,
 							      HDA_OUTPUT));
 			if (err < 0)
@@ -15446,8 +15403,7 @@
 			if (cfg->line_outs == 1 &&
 			    cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
 				pfx = "Speaker";
-			sprintf(name, "%s Playback Switch", pfx);
-			err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+			err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE, pfx,
 					  HDA_COMPOSE_AMP_VAL(nid_s, 3, 2,
 							      HDA_INPUT));
 			if (err < 0)
@@ -15465,7 +15421,6 @@
 {
 	hda_nid_t nid_v, nid_s;
 	int err;
-	char name[32];
 
 	if (!pin)
 		return 0;
@@ -15483,21 +15438,18 @@
 		nid_s = alc861vd_idx_to_mixer_switch(
 				alc880_fixed_pin_idx(pin));
 
-		sprintf(name, "%s Playback Volume", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
+		err = add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx,
 				  HDA_COMPOSE_AMP_VAL(nid_v, 3, 0, HDA_OUTPUT));
 		if (err < 0)
 			return err;
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_BIND_MUTE, name,
+		err = add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE, pfx,
 				  HDA_COMPOSE_AMP_VAL(nid_s, 3, 2, HDA_INPUT));
 		if (err < 0)
 			return err;
 	} else if (alc880_is_multi_pin(pin)) {
 		/* set manual connection */
 		/* we have only a switch on HP-out PIN */
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+		err = add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx,
 				  HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
 		if (err < 0)
 			return err;
@@ -16387,9 +16339,9 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x14, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+	present = snd_hda_jack_detect(codec, 0x14);
 	bits = present ? HDA_AMP_MUTE : 0;
+
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
 }
@@ -16399,9 +16351,9 @@
 	unsigned int present;
 	unsigned char bits;
 
- 	present = snd_hda_codec_read(codec, 0x1b, 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ 	present = snd_hda_jack_detect(codec, 0x1b);
 	bits = present ? HDA_AMP_MUTE : 0;
+
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
 	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
@@ -16460,9 +16412,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x21, 0,
-			AC_VERB_GET_PIN_SENSE, 0)
-			& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x21);
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
 				AMP_IN_MUTE(0), bits);
@@ -16475,9 +16425,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x21, 0,
-			AC_VERB_GET_PIN_SENSE, 0)
-			& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x21);
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
 				AMP_IN_MUTE(0), bits);
@@ -16494,9 +16442,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-			AC_VERB_GET_PIN_SENSE, 0)
-			& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x15);
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
 				AMP_IN_MUTE(0), bits);
@@ -16513,9 +16459,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x1b, 0,
-			AC_VERB_GET_PIN_SENSE, 0)
-			& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x1b);
 	bits = present ? 0 : PIN_OUT;
 	snd_hda_codec_write(codec, 0x14, 0,
 			 AC_VERB_SET_PIN_WIDGET_CONTROL, bits);
@@ -16525,12 +16469,8 @@
 {
 	unsigned int present1, present2;
 
-	present1 = snd_hda_codec_read(codec, 0x21, 0,
-			AC_VERB_GET_PIN_SENSE, 0)
-			& AC_PINSENSE_PRESENCE;
-	present2 = snd_hda_codec_read(codec, 0x15, 0,
-			AC_VERB_GET_PIN_SENSE, 0)
-			& AC_PINSENSE_PRESENCE;
+	present1 = snd_hda_jack_detect(codec, 0x21);
+	present2 = snd_hda_jack_detect(codec, 0x15);
 
 	if (present1 || present2) {
 		snd_hda_codec_write_cache(codec, 0x14, 0,
@@ -16545,12 +16485,8 @@
 {
 	unsigned int present1, present2;
 
-	present1 = snd_hda_codec_read(codec, 0x1b, 0,
-				AC_VERB_GET_PIN_SENSE, 0)
-				& AC_PINSENSE_PRESENCE;
-	present2 = snd_hda_codec_read(codec, 0x15, 0,
-				AC_VERB_GET_PIN_SENSE, 0)
-				& AC_PINSENSE_PRESENCE;
+	present1 = snd_hda_jack_detect(codec, 0x1b);
+	present2 = snd_hda_jack_detect(codec, 0x15);
 
 	if (present1 || present2) {
 		snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
@@ -16710,9 +16646,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x21, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x21);
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
@@ -16725,9 +16659,7 @@
 	unsigned int present;
 	unsigned char bits;
 
-	present = snd_hda_codec_read(codec, 0x15, 0,
-				     AC_VERB_GET_PIN_SENSE, 0)
-		& AC_PINSENSE_PRESENCE;
+	present = snd_hda_jack_detect(codec, 0x15);
 	bits = present ? HDA_AMP_MUTE : 0;
 	snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
 				 HDA_AMP_MUTE, bits);
@@ -17264,21 +17196,17 @@
 	return 0;
 }
 
-static int alc662_add_vol_ctl(struct alc_spec *spec, const char *pfx,
+static inline int alc662_add_vol_ctl(struct alc_spec *spec, const char *pfx,
 			      hda_nid_t nid, unsigned int chs)
 {
-	char name[32];
-	sprintf(name, "%s Playback Volume", pfx);
-	return add_control(spec, ALC_CTL_WIDGET_VOL, name,
+	return add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL, pfx,
 			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
 }
 
-static int alc662_add_sw_ctl(struct alc_spec *spec, const char *pfx,
+static inline int alc662_add_sw_ctl(struct alc_spec *spec, const char *pfx,
 			     hda_nid_t nid, unsigned int chs)
 {
-	char name[32];
-	sprintf(name, "%s Playback Switch", pfx);
-	return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+	return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx,
 			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_INPUT));
 }
 
@@ -17356,13 +17284,11 @@
 		return 0;
 	nid = alc662_look_for_dac(codec, pin);
 	if (!nid) {
-		char name[32];
 		/* the corresponding DAC is already occupied */
 		if (!(get_wcaps(codec, pin) & AC_WCAP_OUT_AMP))
 			return 0; /* no way */
 		/* create a switch only */
-		sprintf(name, "%s Playback Switch", pfx);
-		return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+		return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx,
 				   HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
 	}
 
@@ -17538,6 +17464,15 @@
 
 	alc_fix_pll_init(codec, 0x20, 0x04, 15);
 
+	if (alc_read_coef_idx(codec, 0)==0x8020){
+		kfree(codec->chip_name);
+		codec->chip_name = kstrdup("ALC661", GFP_KERNEL);
+		if (!codec->chip_name) {
+			alc_free(codec);
+			return -ENOMEM;
+		}
+	}
+
 	board_config = snd_hda_check_board_config(codec, ALC662_MODEL_LAST,
 						  alc662_models,
 			  	                  alc662_cfg_tbl);
@@ -17604,6 +17539,20 @@
 	return 0;
 }
 
+static int patch_alc888(struct hda_codec *codec)
+{
+	if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){
+		kfree(codec->chip_name);
+		codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
+		if (!codec->chip_name) {
+			alc_free(codec);
+			return -ENOMEM;
+		}
+		return patch_alc662(codec);
+	}
+	return patch_alc882(codec);
+}
+
 /*
  * patch entries
  */
@@ -17635,8 +17584,9 @@
 	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
 	{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
 	  .patch = patch_alc882 },
-	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc882 },
+	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 },
 	{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc882 },
+	{ .id = 0x10ec0892, .name = "ALC892", .patch = patch_alc662 },
 	{} /* terminator */
 };
 
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 86de305..6b0bc04 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -93,6 +93,7 @@
 	STAC_92HD83XXX_REF,
 	STAC_92HD83XXX_PWR_REF,
 	STAC_DELL_S14,
+	STAC_92HD83XXX_HP,
 	STAC_92HD83XXX_MODELS
 };
 
@@ -1085,7 +1086,7 @@
 	if (!spec->auto_mic && spec->num_dmuxes > 0 &&
 	    snd_hda_get_bool_hint(codec, "separate_dmux") == 1) {
 		stac_dmux_mixer.count = spec->num_dmuxes;
-		err = snd_hda_ctl_add(codec,
+		err = snd_hda_ctl_add(codec, 0,
 				  snd_ctl_new1(&stac_dmux_mixer, codec));
 		if (err < 0)
 			return err;
@@ -1101,7 +1102,7 @@
 			spec->spdif_mute = 1;
 		}
 		stac_smux_mixer.count = spec->num_smuxes;
-		err = snd_hda_ctl_add(codec,
+		err = snd_hda_ctl_add(codec, 0,
 				  snd_ctl_new1(&stac_smux_mixer, codec));
 		if (err < 0)
 			return err;
@@ -1624,6 +1625,7 @@
 	[STAC_92HD83XXX_REF] = "ref",
 	[STAC_92HD83XXX_PWR_REF] = "mic-ref",
 	[STAC_DELL_S14] = "dell-s14",
+	[STAC_92HD83XXX_HP] = "hp",
 };
 
 static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
@@ -1634,6 +1636,8 @@
 		      "DFI LanParty", STAC_92HD83XXX_REF),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ba,
 		      "unknown Dell", STAC_DELL_S14),
+	SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xff00, 0x3600,
+		      "HP", STAC_92HD83XXX_HP),
 	{} /* terminator */
 };
 
@@ -2648,6 +2652,7 @@
 enum {
 	STAC_CTL_WIDGET_VOL,
 	STAC_CTL_WIDGET_MUTE,
+	STAC_CTL_WIDGET_MUTE_BEEP,
 	STAC_CTL_WIDGET_MONO_MUX,
 	STAC_CTL_WIDGET_HP_SWITCH,
 	STAC_CTL_WIDGET_IO_SWITCH,
@@ -2658,6 +2663,7 @@
 static struct snd_kcontrol_new stac92xx_control_templates[] = {
 	HDA_CODEC_VOLUME(NULL, 0, 0, 0),
 	HDA_CODEC_MUTE(NULL, 0, 0, 0),
+	HDA_CODEC_MUTE_BEEP(NULL, 0, 0, 0),
 	STAC_MONO_MUX,
 	STAC_CODEC_HP_SWITCH(NULL),
 	STAC_CODEC_IO_SWITCH(NULL, 0),
@@ -2669,7 +2675,8 @@
 static struct snd_kcontrol_new *
 stac_control_new(struct sigmatel_spec *spec,
 		 struct snd_kcontrol_new *ktemp,
-		 const char *name)
+		 const char *name,
+		 hda_nid_t nid)
 {
 	struct snd_kcontrol_new *knew;
 
@@ -2685,6 +2692,8 @@
 		spec->kctls.alloced--;
 		return NULL;
 	}
+	if (nid)
+		knew->subdevice = HDA_SUBDEV_NID_FLAG | nid;
 	return knew;
 }
 
@@ -2693,7 +2702,8 @@
 				     int idx, const char *name,
 				     unsigned long val)
 {
-	struct snd_kcontrol_new *knew = stac_control_new(spec, ktemp, name);
+	struct snd_kcontrol_new *knew = stac_control_new(spec, ktemp, name,
+							 get_amp_nid_(val));
 	if (!knew)
 		return -ENOMEM;
 	knew->index = idx;
@@ -2764,7 +2774,7 @@
 	if (!spec->num_adcs || imux->num_items <= 1)
 		return 0; /* no need for input source control */
 	knew = stac_control_new(spec, &stac_input_src_temp,
-				stac_input_src_temp.name);
+				stac_input_src_temp.name, 0);
 	if (!knew)
 		return -ENOMEM;
 	knew->count = spec->num_adcs;
@@ -3221,12 +3231,15 @@
 {
 	struct sigmatel_spec *spec = codec->spec;
 	u32 caps = query_amp_caps(codec, nid, HDA_OUTPUT);
-	int err;
+	int err, type = STAC_CTL_WIDGET_MUTE_BEEP;
+
+	if (spec->anabeep_nid == nid)
+		type = STAC_CTL_WIDGET_MUTE;
 
 	/* check for mute support for the the amp */
 	if ((caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_MUTE,
-			"PC Beep Playback Switch",
+		err = stac92xx_add_control(spec, type,
+			"Beep Playback Switch",
 			HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT));
 			if (err < 0)
 				return err;
@@ -3235,7 +3248,7 @@
 	/* check to see if there is volume support for the amp */
 	if ((caps & AC_AMPCAP_NUM_STEPS) >> AC_AMPCAP_NUM_STEPS_SHIFT) {
 		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_VOL,
-			"PC Beep Playback Volume",
+			"Beep Playback Volume",
 			HDA_COMPOSE_AMP_VAL(nid, 1, 0, HDA_OUTPUT));
 			if (err < 0)
 				return err;
@@ -3258,12 +3271,7 @@
 					struct snd_ctl_elem_value *ucontrol)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	int enabled = !!ucontrol->value.integer.value[0];
-	if (codec->beep->enabled != enabled) {
-		codec->beep->enabled = enabled;
-		return 1;
-	}
-	return 0;
+	return snd_hda_enable_beep_device(codec, ucontrol->value.integer.value[0]);
 }
 
 static struct snd_kcontrol_new stac92xx_dig_beep_ctrl = {
@@ -3276,7 +3284,7 @@
 static int stac92xx_beep_switch_ctl(struct hda_codec *codec)
 {
 	return stac92xx_add_control_temp(codec->spec, &stac92xx_dig_beep_ctrl,
-					 0, "PC Beep Playback Switch", 0);
+					 0, "Beep Playback Switch", 0);
 }
 #endif
 
@@ -3631,6 +3639,26 @@
 	}
 }
 
+static int is_dual_headphones(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int i, valid_hps;
+
+	if (spec->autocfg.line_out_type != AUTO_PIN_SPEAKER_OUT ||
+	    spec->autocfg.hp_outs <= 1)
+		return 0;
+	valid_hps = 0;
+	for (i = 0; i < spec->autocfg.hp_outs; i++) {
+		hda_nid_t nid = spec->autocfg.hp_pins[i];
+		unsigned int cfg = snd_hda_codec_get_pincfg(codec, nid);
+		if (get_defcfg_location(cfg) & AC_JACK_LOC_SEPARATE)
+			continue;
+		valid_hps++;
+	}
+	return (valid_hps > 1);
+}
+
+
 static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out, hda_nid_t dig_in)
 {
 	struct sigmatel_spec *spec = codec->spec;
@@ -3647,8 +3675,7 @@
 	/* If we have no real line-out pin and multiple hp-outs, HPs should
 	 * be set up as multi-channel outputs.
 	 */
-	if (spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT &&
-	    spec->autocfg.hp_outs > 1) {
+	if (is_dual_headphones(codec)) {
 		/* Copy hp_outs to line_outs, backup line_outs in
 		 * speaker_outs so that the following routines can handle
 		 * HP pins as primary outputs.
@@ -4329,6 +4356,28 @@
 	snd_array_free(&spec->kctls);
 }
 
+static void stac92xx_shutup(struct hda_codec *codec)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int i;
+	hda_nid_t nid;
+
+	/* reset each pin before powering down DAC/ADC to avoid click noise */
+	nid = codec->start_nid;
+	for (i = 0; i < codec->num_nodes; i++, nid++) {
+		unsigned int wcaps = get_wcaps(codec, nid);
+		unsigned int wid_type = get_wcaps_type(wcaps);
+		if (wid_type == AC_WID_PIN)
+			snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
+	}
+
+	if (spec->eapd_mask)
+		stac_gpio_set(codec, spec->gpio_mask,
+				spec->gpio_dir, spec->gpio_data &
+				~spec->eapd_mask);
+}
+
 static void stac92xx_free(struct hda_codec *codec)
 {
 	struct sigmatel_spec *spec = codec->spec;
@@ -4336,6 +4385,7 @@
 	if (! spec)
 		return;
 
+	stac92xx_shutup(codec);
 	stac92xx_free_jacks(codec);
 	snd_array_free(&spec->events);
 
@@ -4386,12 +4436,16 @@
 					  pin_ctl & ~flag);
 }
 
-static int get_pin_presence(struct hda_codec *codec, hda_nid_t nid)
+static inline int get_pin_presence(struct hda_codec *codec, hda_nid_t nid)
 {
 	if (!nid)
 		return 0;
-	if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0x00)
-	    & (1 << 31))
+	/* NOTE: we can't use snd_hda_jack_detect() here because STAC/IDT
+	 * codecs behave wrongly when SET_PIN_SENSE is triggered, although
+	 * the pincap gives TRIG_REQ bit.
+	 */
+	if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0) &
+	    AC_PINSENSE_PRESENCE)
 		return 1;
 	return 0;
 }
@@ -4791,28 +4845,28 @@
 
 	return 0;
 }
+
+static int idt92hd83xxx_hp_check_power_status(struct hda_codec *codec,
+					      hda_nid_t nid)
+{
+	struct sigmatel_spec *spec = codec->spec;
+
+	if (nid != 0x13)
+		return 0;
+	if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) & HDA_AMP_MUTE)
+		spec->gpio_data |= spec->gpio_led; /* mute LED on */
+	else
+		spec->gpio_data &= ~spec->gpio_led; /* mute LED off */
+	stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data);
+
+	return 0;
+}
+
 #endif
 
 static int stac92xx_suspend(struct hda_codec *codec, pm_message_t state)
 {
-	struct sigmatel_spec *spec = codec->spec;
-	int i;
-	hda_nid_t nid;
-
-	/* reset each pin before powering down DAC/ADC to avoid click noise */
-	nid = codec->start_nid;
-	for (i = 0; i < codec->num_nodes; i++, nid++) {
-		unsigned int wcaps = get_wcaps(codec, nid);
-		unsigned int wid_type = get_wcaps_type(wcaps);
-		if (wid_type == AC_WID_PIN)
-			snd_hda_codec_read(codec, nid, 0,
-				AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
-	}
-
-	if (spec->eapd_mask)
-		stac_gpio_set(codec, spec->gpio_mask,
-				spec->gpio_dir, spec->gpio_data &
-				~spec->eapd_mask);
+	stac92xx_shutup(codec);
 	return 0;
 }
 #endif
@@ -4827,6 +4881,7 @@
 	.suspend = stac92xx_suspend,
 	.resume = stac92xx_resume,
 #endif
+	.reboot_notify = stac92xx_shutup,
 };
 
 static int patch_stac9200(struct hda_codec *codec)
@@ -5172,6 +5227,22 @@
 		break;
 	}
 
+	codec->patch_ops = stac92xx_patch_ops;
+
+	if (spec->board_config == STAC_92HD83XXX_HP)
+		spec->gpio_led = 0x01;
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	if (spec->gpio_led) {
+		spec->gpio_mask |= spec->gpio_led;
+		spec->gpio_dir |= spec->gpio_led;
+		spec->gpio_data |= spec->gpio_led;
+		/* register check_power_status callback. */
+		codec->patch_ops.check_power_status =
+			idt92hd83xxx_hp_check_power_status;
+	}
+#endif	
+
 	err = stac92xx_parse_auto_config(codec, 0x1d, 0);
 	if (!err) {
 		if (spec->board_config < 0) {
@@ -5207,8 +5278,6 @@
 	snd_hda_codec_write_cache(codec, nid, 0,
 			AC_VERB_SET_CONNECT_SEL, num_dacs);
 
-	codec->patch_ops = stac92xx_patch_ops;
-
 	codec->proc_widget_hook = stac92hd_proc_hook;
 
 	return 0;
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index ee89db9..b70e26a 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1,10 +1,10 @@
 /*
  * Universal Interface for Intel High Definition Audio Codec
  *
- * HD audio interface patch for VIA VT1702/VT1708/VT1709 codec
+ * HD audio interface patch for VIA VT17xx/VT18xx/VT20xx codec
  *
- * Copyright (c) 2006-2008 Lydia Wang <lydiawang@viatech.com>
- *			   Takashi Iwai <tiwai@suse.de>
+ *  (C) 2006-2009 VIA Technology, Inc.
+ *  (C) 2006-2008 Takashi Iwai <tiwai@suse.de>
  *
  *  This driver is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -22,21 +22,27 @@
  */
 
 /* * * * * * * * * * * * * * Release History * * * * * * * * * * * * * * * * */
-/*                                                                           */
+/*									     */
 /* 2006-03-03  Lydia Wang  Create the basic patch to support VT1708 codec    */
-/* 2006-03-14  Lydia Wang  Modify hard code for some pin widget nid          */
-/* 2006-08-02  Lydia Wang  Add support to VT1709 codec                       */
+/* 2006-03-14  Lydia Wang  Modify hard code for some pin widget nid	     */
+/* 2006-08-02  Lydia Wang  Add support to VT1709 codec			     */
 /* 2006-09-08  Lydia Wang  Fix internal loopback recording source select bug */
-/* 2007-09-12  Lydia Wang  Add EAPD enable during driver initialization      */
-/* 2007-09-17  Lydia Wang  Add VT1708B codec support                        */
+/* 2007-09-12  Lydia Wang  Add EAPD enable during driver initialization	     */
+/* 2007-09-17  Lydia Wang  Add VT1708B codec support			    */
 /* 2007-11-14  Lydia Wang  Add VT1708A codec HP and CD pin connect config    */
 /* 2008-02-03  Lydia Wang  Fix Rear channels and Back channels inverse issue */
-/* 2008-03-06  Lydia Wang  Add VT1702 codec and VT1708S codec support        */
-/* 2008-04-09  Lydia Wang  Add mute front speaker when HP plugin             */
-/* 2008-04-09  Lydia Wang  Add Independent HP feature                        */
+/* 2008-03-06  Lydia Wang  Add VT1702 codec and VT1708S codec support	     */
+/* 2008-04-09  Lydia Wang  Add mute front speaker when HP plugin	     */
+/* 2008-04-09  Lydia Wang  Add Independent HP feature			     */
 /* 2008-05-28  Lydia Wang  Add second S/PDIF Out support for VT1702	     */
-/* 2008-09-15  Logan Li    Add VT1708S Mic Boost workaround/backdoor	     */
-/*                                                                           */
+/* 2008-09-15  Logan Li	   Add VT1708S Mic Boost workaround/backdoor	     */
+/* 2009-02-16  Logan Li	   Add support for VT1718S			     */
+/* 2009-03-13  Logan Li	   Add support for VT1716S			     */
+/* 2009-04-14  Lydai Wang  Add support for VT1828S and VT2020		     */
+/* 2009-07-08  Lydia Wang  Add support for VT2002P			     */
+/* 2009-07-21  Lydia Wang  Add support for VT1812			     */
+/* 2009-09-19  Lydia Wang  Add support for VT1818S			     */
+/*									     */
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 
 
@@ -76,14 +82,6 @@
 #define VT1702_HP_NID		0x17
 #define VT1702_DIGOUT_NID	0x11
 
-#define IS_VT1708_VENDORID(x)		((x) >= 0x11061708 && (x) <= 0x1106170b)
-#define IS_VT1709_10CH_VENDORID(x)	((x) >= 0x1106e710 && (x) <= 0x1106e713)
-#define IS_VT1709_6CH_VENDORID(x)	((x) >= 0x1106e714 && (x) <= 0x1106e717)
-#define IS_VT1708B_8CH_VENDORID(x)	((x) >= 0x1106e720 && (x) <= 0x1106e723)
-#define IS_VT1708B_4CH_VENDORID(x)	((x) >= 0x1106e724 && (x) <= 0x1106e727)
-#define IS_VT1708S_VENDORID(x)		((x) >= 0x11060397 && (x) <= 0x11067397)
-#define IS_VT1702_VENDORID(x)		((x) >= 0x11060398 && (x) <= 0x11067398)
-
 enum VIA_HDA_CODEC {
 	UNKNOWN = -1,
 	VT1708,
@@ -92,104 +90,18 @@
 	VT1708B_8CH,
 	VT1708B_4CH,
 	VT1708S,
+	VT1708BCE,
 	VT1702,
+	VT1718S,
+	VT1716S,
+	VT2002P,
+	VT1812,
 	CODEC_TYPES,
 };
 
-static enum VIA_HDA_CODEC get_codec_type(u32 vendor_id)
-{
-	u16 ven_id = vendor_id >> 16;
-	u16 dev_id = vendor_id & 0xffff;
-	enum VIA_HDA_CODEC codec_type;
-
-	/* get codec type */
-	if (ven_id != 0x1106)
-		codec_type = UNKNOWN;
-	else if (dev_id >= 0x1708 && dev_id <= 0x170b)
-		codec_type = VT1708;
-	else if (dev_id >= 0xe710 && dev_id <= 0xe713)
-		codec_type = VT1709_10CH;
-	else if (dev_id >= 0xe714 && dev_id <= 0xe717)
-		codec_type = VT1709_6CH;
-	else if (dev_id >= 0xe720 && dev_id <= 0xe723)
-		codec_type = VT1708B_8CH;
-	else if (dev_id >= 0xe724 && dev_id <= 0xe727)
-		codec_type = VT1708B_4CH;
-	else if ((dev_id & 0xfff) == 0x397
-		 && (dev_id >> 12) < 8)
-		codec_type = VT1708S;
-	else if ((dev_id & 0xfff) == 0x398
-		 && (dev_id >> 12) < 8)
-		codec_type = VT1702;
-	else
-		codec_type = UNKNOWN;
-	return codec_type;
-};
-
-#define VIA_HP_EVENT		0x01
-#define VIA_GPIO_EVENT		0x02
-
-enum {
-	VIA_CTL_WIDGET_VOL,
-	VIA_CTL_WIDGET_MUTE,
-};
-
-enum {
-	AUTO_SEQ_FRONT = 0,
-	AUTO_SEQ_SURROUND,
-	AUTO_SEQ_CENLFE,
-	AUTO_SEQ_SIDE
-};
-
-/* Some VT1708S based boards gets the micboost setting wrong, so we have
- * to apply some brute-force and re-write the TLV's by software. */
-static int mic_boost_tlv(struct snd_kcontrol *kcontrol, int op_flag,
-			 unsigned int size, unsigned int __user *_tlv)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = get_amp_nid(kcontrol);
-
-	if (get_codec_type(codec->vendor_id) == VT1708S
-	    && (nid == 0x1a || nid == 0x1e)) {
-		if (size < 4 * sizeof(unsigned int))
-			return -ENOMEM;
-		if (put_user(1, _tlv))	/* SNDRV_CTL_TLVT_DB_SCALE */
-			return -EFAULT;
-		if (put_user(2 * sizeof(unsigned int), _tlv + 1))
-			return -EFAULT;
-		if (put_user(0, _tlv + 2)) /* offset = 0 */
-			return -EFAULT;
-		if (put_user(1000, _tlv + 3)) /* step size = 10 dB */
-			return -EFAULT;
-	}
-	return 0;
-}
-
-static int mic_boost_volume_info(struct snd_kcontrol *kcontrol,
-				 struct snd_ctl_elem_info *uinfo)
-{
-	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
-	hda_nid_t nid = get_amp_nid(kcontrol);
-
-	if (get_codec_type(codec->vendor_id) == VT1708S
-	    && (nid == 0x1a || nid == 0x1e)) {
-		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-		uinfo->count = 2;
-		uinfo->value.integer.min = 0;
-		uinfo->value.integer.max = 3;
-	}
-	return 0;
-}
-
-static struct snd_kcontrol_new vt1708_control_templates[] = {
-	HDA_CODEC_VOLUME(NULL, 0, 0, 0),
-	HDA_CODEC_MUTE(NULL, 0, 0, 0),
-};
-
-
 struct via_spec {
 	/* codec parameterization */
-	struct snd_kcontrol_new *mixers[3];
+	struct snd_kcontrol_new *mixers[6];
 	unsigned int num_mixers;
 
 	struct hda_verb *init_verbs[5];
@@ -230,12 +142,246 @@
 	/* HP mode source */
 	const struct hda_input_mux *hp_mux;
 	unsigned int hp_independent_mode;
+	unsigned int hp_independent_mode_index;
+	unsigned int smart51_enabled;
+	unsigned int dmic_enabled;
+	enum VIA_HDA_CODEC codec_type;
 
+	/* work to check hp jack state */
+	struct hda_codec *codec;
+	struct delayed_work vt1708_hp_work;
+	int vt1708_jack_detectect;
+	int vt1708_hp_present;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	struct hda_loopback_check loopback;
 #endif
 };
 
+static enum VIA_HDA_CODEC get_codec_type(struct hda_codec *codec)
+{
+	u32 vendor_id = codec->vendor_id;
+	u16 ven_id = vendor_id >> 16;
+	u16 dev_id = vendor_id & 0xffff;
+	enum VIA_HDA_CODEC codec_type;
+
+	/* get codec type */
+	if (ven_id != 0x1106)
+		codec_type = UNKNOWN;
+	else if (dev_id >= 0x1708 && dev_id <= 0x170b)
+		codec_type = VT1708;
+	else if (dev_id >= 0xe710 && dev_id <= 0xe713)
+		codec_type = VT1709_10CH;
+	else if (dev_id >= 0xe714 && dev_id <= 0xe717)
+		codec_type = VT1709_6CH;
+	else if (dev_id >= 0xe720 && dev_id <= 0xe723) {
+		codec_type = VT1708B_8CH;
+		if (snd_hda_param_read(codec, 0x16, AC_PAR_CONNLIST_LEN) == 0x7)
+			codec_type = VT1708BCE;
+	} else if (dev_id >= 0xe724 && dev_id <= 0xe727)
+		codec_type = VT1708B_4CH;
+	else if ((dev_id & 0xfff) == 0x397
+		 && (dev_id >> 12) < 8)
+		codec_type = VT1708S;
+	else if ((dev_id & 0xfff) == 0x398
+		 && (dev_id >> 12) < 8)
+		codec_type = VT1702;
+	else if ((dev_id & 0xfff) == 0x428
+		 && (dev_id >> 12) < 8)
+		codec_type = VT1718S;
+	else if (dev_id == 0x0433 || dev_id == 0xa721)
+		codec_type = VT1716S;
+	else if (dev_id == 0x0441 || dev_id == 0x4441)
+		codec_type = VT1718S;
+	else if (dev_id == 0x0438 || dev_id == 0x4438)
+		codec_type = VT2002P;
+	else if (dev_id == 0x0448)
+		codec_type = VT1812;
+	else if (dev_id == 0x0440)
+		codec_type = VT1708S;
+	else
+		codec_type = UNKNOWN;
+	return codec_type;
+};
+
+#define VIA_HP_EVENT		0x01
+#define VIA_GPIO_EVENT		0x02
+#define VIA_JACK_EVENT		0x04
+#define VIA_MONO_EVENT		0x08
+#define VIA_SPEAKER_EVENT	0x10
+#define VIA_BIND_HP_EVENT	0x20
+
+enum {
+	VIA_CTL_WIDGET_VOL,
+	VIA_CTL_WIDGET_MUTE,
+	VIA_CTL_WIDGET_ANALOG_MUTE,
+	VIA_CTL_WIDGET_BIND_PIN_MUTE,
+};
+
+enum {
+	AUTO_SEQ_FRONT = 0,
+	AUTO_SEQ_SURROUND,
+	AUTO_SEQ_CENLFE,
+	AUTO_SEQ_SIDE
+};
+
+static void analog_low_current_mode(struct hda_codec *codec, int stream_idle);
+static void set_jack_power_state(struct hda_codec *codec);
+static int is_aa_path_mute(struct hda_codec *codec);
+
+static void vt1708_start_hp_work(struct via_spec *spec)
+{
+	if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0)
+		return;
+	snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81,
+			    !spec->vt1708_jack_detectect);
+	if (!delayed_work_pending(&spec->vt1708_hp_work))
+		schedule_delayed_work(&spec->vt1708_hp_work,
+				      msecs_to_jiffies(100));
+}
+
+static void vt1708_stop_hp_work(struct via_spec *spec)
+{
+	if (spec->codec_type != VT1708 || spec->autocfg.hp_pins[0] == 0)
+		return;
+	if (snd_hda_get_bool_hint(spec->codec, "analog_loopback_hp_detect") == 1
+	    && !is_aa_path_mute(spec->codec))
+		return;
+	snd_hda_codec_write(spec->codec, 0x1, 0, 0xf81,
+			    !spec->vt1708_jack_detectect);
+	cancel_delayed_work(&spec->vt1708_hp_work);
+	flush_scheduled_work();
+}
+
+
+static int analog_input_switch_put(struct snd_kcontrol *kcontrol,
+				   struct snd_ctl_elem_value *ucontrol)
+{
+	int change = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+
+	set_jack_power_state(codec);
+	analog_low_current_mode(snd_kcontrol_chip(kcontrol), -1);
+	if (snd_hda_get_bool_hint(codec, "analog_loopback_hp_detect") == 1) {
+		if (is_aa_path_mute(codec))
+			vt1708_start_hp_work(codec->spec);
+		else
+			vt1708_stop_hp_work(codec->spec);
+	}
+	return change;
+}
+
+/* modify .put = snd_hda_mixer_amp_switch_put */
+#define ANALOG_INPUT_MUTE						\
+	{		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+			.name = NULL,					\
+			.index = 0,					\
+			.info = snd_hda_mixer_amp_switch_info,		\
+			.get = snd_hda_mixer_amp_switch_get,		\
+			.put = analog_input_switch_put,			\
+			.private_value = HDA_COMPOSE_AMP_VAL(0, 3, 0, 0) }
+
+static void via_hp_bind_automute(struct hda_codec *codec);
+
+static int bind_pin_switch_put(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct via_spec *spec = codec->spec;
+	int i;
+	int change = 0;
+
+	long *valp = ucontrol->value.integer.value;
+	int lmute, rmute;
+	if (strstr(kcontrol->id.name, "Switch") == NULL) {
+		snd_printd("Invalid control!\n");
+		return change;
+	}
+	change = snd_hda_mixer_amp_switch_put(kcontrol,
+					      ucontrol);
+	/* Get mute value */
+	lmute = *valp ? 0 : HDA_AMP_MUTE;
+	valp++;
+	rmute = *valp ? 0 : HDA_AMP_MUTE;
+
+	/* Set hp pins */
+	if (!spec->hp_independent_mode) {
+		for (i = 0; i < spec->autocfg.hp_outs; i++) {
+			snd_hda_codec_amp_update(
+				codec, spec->autocfg.hp_pins[i],
+				0, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+				lmute);
+			snd_hda_codec_amp_update(
+				codec, spec->autocfg.hp_pins[i],
+				1, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+				rmute);
+		}
+	}
+
+	if (!lmute && !rmute) {
+		/* Line Outs */
+		for (i = 0; i < spec->autocfg.line_outs; i++)
+			snd_hda_codec_amp_stereo(
+				codec, spec->autocfg.line_out_pins[i],
+				HDA_OUTPUT, 0, HDA_AMP_MUTE, 0);
+		/* Speakers */
+		for (i = 0; i < spec->autocfg.speaker_outs; i++)
+			snd_hda_codec_amp_stereo(
+				codec, spec->autocfg.speaker_pins[i],
+				HDA_OUTPUT, 0, HDA_AMP_MUTE, 0);
+		/* unmute */
+		via_hp_bind_automute(codec);
+
+	} else {
+		if (lmute) {
+			/* Mute all left channels */
+			for (i = 1; i < spec->autocfg.line_outs; i++)
+				snd_hda_codec_amp_update(
+					codec,
+					spec->autocfg.line_out_pins[i],
+					0, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+					lmute);
+			for (i = 0; i < spec->autocfg.speaker_outs; i++)
+				snd_hda_codec_amp_update(
+					codec,
+					spec->autocfg.speaker_pins[i],
+					0, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+					lmute);
+		}
+		if (rmute) {
+			/* mute all right channels */
+			for (i = 1; i < spec->autocfg.line_outs; i++)
+				snd_hda_codec_amp_update(
+					codec,
+					spec->autocfg.line_out_pins[i],
+					1, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+					rmute);
+			for (i = 0; i < spec->autocfg.speaker_outs; i++)
+				snd_hda_codec_amp_update(
+					codec,
+					spec->autocfg.speaker_pins[i],
+					1, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+					rmute);
+		}
+	}
+	return change;
+}
+
+#define BIND_PIN_MUTE							\
+	{		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
+			.name = NULL,					\
+			.index = 0,					\
+			.info = snd_hda_mixer_amp_switch_info,		\
+			.get = snd_hda_mixer_amp_switch_get,		\
+			.put = bind_pin_switch_put,			\
+			.private_value = HDA_COMPOSE_AMP_VAL(0, 3, 0, 0) }
+
+static struct snd_kcontrol_new via_control_templates[] = {
+	HDA_CODEC_VOLUME(NULL, 0, 0, 0),
+	HDA_CODEC_MUTE(NULL, 0, 0, 0),
+	ANALOG_INPUT_MUTE,
+	BIND_PIN_MUTE,
+};
+
 static hda_nid_t vt1708_adc_nids[2] = {
 	/* ADC1-2 */
 	0x15, 0x27
@@ -261,6 +407,27 @@
 	0x12, 0x20, 0x1F
 };
 
+static hda_nid_t vt1718S_adc_nids[2] = {
+	/* ADC1-2 */
+	0x10, 0x11
+};
+
+static hda_nid_t vt1716S_adc_nids[2] = {
+	/* ADC1-2 */
+	0x13, 0x14
+};
+
+static hda_nid_t vt2002P_adc_nids[2] = {
+	/* ADC1-2 */
+	0x10, 0x11
+};
+
+static hda_nid_t vt1812_adc_nids[2] = {
+	/* ADC1-2 */
+	0x10, 0x11
+};
+
+
 /* add dynamic controls */
 static int via_add_control(struct via_spec *spec, int type, const char *name,
 			   unsigned long val)
@@ -271,10 +438,12 @@
 	knew = snd_array_new(&spec->kctls);
 	if (!knew)
 		return -ENOMEM;
-	*knew = vt1708_control_templates[type];
+	*knew = via_control_templates[type];
 	knew->name = kstrdup(name, GFP_KERNEL);
 	if (!knew->name)
 		return -ENOMEM;
+	if (get_amp_nid_(val))
+		knew->subdevice = HDA_SUBDEV_NID_FLAG | get_amp_nid_(val);
 	knew->private_value = val;
 	return 0;
 }
@@ -293,8 +462,8 @@
 }
 
 /* create input playback/capture controls for the given pin */
-static int via_new_analog_input(struct via_spec *spec, hda_nid_t pin,
-				const char *ctlname, int idx, int mix_nid)
+static int via_new_analog_input(struct via_spec *spec, const char *ctlname,
+				int idx, int mix_nid)
 {
 	char name[32];
 	int err;
@@ -305,7 +474,7 @@
 	if (err < 0)
 		return err;
 	sprintf(name, "%s Playback Switch", ctlname);
-	err = via_add_control(spec, VIA_CTL_WIDGET_MUTE, name,
+	err = via_add_control(spec, VIA_CTL_WIDGET_ANALOG_MUTE, name,
 			      HDA_COMPOSE_AMP_VAL(mix_nid, 3, idx, HDA_INPUT));
 	if (err < 0)
 		return err;
@@ -322,7 +491,7 @@
 	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_AMP_GAIN_MUTE,
 			    AMP_OUT_UNMUTE);
 	if (snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD)
-		snd_hda_codec_write(codec, nid, 0, 
+		snd_hda_codec_write(codec, nid, 0,
 				    AC_VERB_SET_EAPD_BTLENABLE, 0x02);
 }
 
@@ -343,10 +512,13 @@
 {
 	struct via_spec *spec = codec->spec;
 	hda_nid_t pin;
+	int i;
 
-	pin = spec->autocfg.hp_pins[0];
-	if (pin) /* connect to front */
-		via_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+	for (i = 0; i < spec->autocfg.hp_outs; i++) {
+		pin = spec->autocfg.hp_pins[i];
+		if (pin) /* connect to front */
+			via_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+	}
 }
 
 static void via_auto_init_analog_input(struct hda_codec *codec)
@@ -364,6 +536,502 @@
 
 	}
 }
+
+static int is_smart51_pins(struct via_spec *spec, hda_nid_t pin);
+
+static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid,
+				unsigned int *affected_parm)
+{
+	unsigned parm;
+	unsigned def_conf = snd_hda_codec_get_pincfg(codec, nid);
+	unsigned no_presence = (def_conf & AC_DEFCFG_MISC)
+		>> AC_DEFCFG_MISC_SHIFT
+		& AC_DEFCFG_MISC_NO_PRESENCE; /* do not support pin sense */
+	unsigned present = snd_hda_jack_detect(codec, nid);
+	struct via_spec *spec = codec->spec;
+	if ((spec->smart51_enabled && is_smart51_pins(spec, nid))
+	    || ((no_presence || present)
+		&& get_defcfg_connect(def_conf) != AC_JACK_PORT_NONE)) {
+		*affected_parm = AC_PWRST_D0; /* if it's connected */
+		parm = AC_PWRST_D0;
+	} else
+		parm = AC_PWRST_D3;
+
+	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, parm);
+}
+
+static void set_jack_power_state(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int imux_is_smixer;
+	unsigned int parm;
+
+	if (spec->codec_type == VT1702) {
+		imux_is_smixer = snd_hda_codec_read(
+			codec, 0x13, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 3;
+		/* inputs */
+		/* PW 1/2/5 (14h/15h/18h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x14, &parm);
+		set_pin_power_state(codec, 0x15, &parm);
+		set_pin_power_state(codec, 0x18, &parm);
+		if (imux_is_smixer)
+			parm = AC_PWRST_D0; /* SW0 = stereo mixer (idx 3) */
+		/* SW0 (13h), AIW 0/1/2 (12h/1fh/20h) */
+		snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x12, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* outputs */
+		/* PW 3/4 (16h/17h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x16, &parm);
+		set_pin_power_state(codec, 0x17, &parm);
+		/* MW0 (1ah), AOW 0/1 (10h/1dh) */
+		snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_POWER_STATE,
+				    imux_is_smixer ? AC_PWRST_D0 : parm);
+		snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x1d, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+	} else if (spec->codec_type == VT1708B_8CH
+		   || spec->codec_type == VT1708B_4CH
+		   || spec->codec_type == VT1708S) {
+		/* SW0 (17h) = stereo mixer */
+		int is_8ch = spec->codec_type != VT1708B_4CH;
+		imux_is_smixer = snd_hda_codec_read(
+			codec, 0x17, 0, AC_VERB_GET_CONNECT_SEL, 0x00)
+			== ((spec->codec_type == VT1708S)  ? 5 : 0);
+		/* inputs */
+		/* PW 1/2/5 (1ah/1bh/1eh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x1a, &parm);
+		set_pin_power_state(codec, 0x1b, &parm);
+		set_pin_power_state(codec, 0x1e, &parm);
+		if (imux_is_smixer)
+			parm = AC_PWRST_D0;
+		/* SW0 (17h), AIW 0/1 (13h/14h) */
+		snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* outputs */
+		/* PW0 (19h), SW1 (18h), AOW1 (11h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x19, &parm);
+		snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* PW6 (22h), SW2 (26h), AOW2 (24h) */
+		if (is_8ch) {
+			parm = AC_PWRST_D3;
+			set_pin_power_state(codec, 0x22, &parm);
+			snd_hda_codec_write(codec, 0x26, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+			snd_hda_codec_write(codec, 0x24, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+		}
+
+		/* PW 3/4/7 (1ch/1dh/23h) */
+		parm = AC_PWRST_D3;
+		/* force to D0 for internal Speaker */
+		set_pin_power_state(codec, 0x1c, &parm);
+		set_pin_power_state(codec, 0x1d, &parm);
+		if (is_8ch)
+			set_pin_power_state(codec, 0x23, &parm);
+		/* MW0 (16h), Sw3 (27h), AOW 0/3 (10h/25h) */
+		snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_POWER_STATE,
+				    imux_is_smixer ? AC_PWRST_D0 : parm);
+		snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		if (is_8ch) {
+			snd_hda_codec_write(codec, 0x25, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+			snd_hda_codec_write(codec, 0x27, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+		}
+	}  else if (spec->codec_type == VT1718S) {
+		/* MUX6 (1eh) = stereo mixer */
+		imux_is_smixer = snd_hda_codec_read(
+			codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 5;
+		/* inputs */
+		/* PW 5/6/7 (29h/2ah/2bh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x29, &parm);
+		set_pin_power_state(codec, 0x2a, &parm);
+		set_pin_power_state(codec, 0x2b, &parm);
+		if (imux_is_smixer)
+			parm = AC_PWRST_D0;
+		/* MUX6/7 (1eh/1fh), AIW 0/1 (10h/11h) */
+		snd_hda_codec_write(codec, 0x1e, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* outputs */
+		/* PW3 (27h), MW2 (1ah), AOW3 (bh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x27, &parm);
+		snd_hda_codec_write(codec, 0x1a, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0xb, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* PW2 (26h), AOW2 (ah) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x26, &parm);
+		snd_hda_codec_write(codec, 0xa, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* PW0/1 (24h/25h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x24, &parm);
+		set_pin_power_state(codec, 0x25, &parm);
+		if (!spec->hp_independent_mode) /* check for redirected HP */
+			set_pin_power_state(codec, 0x28, &parm);
+		snd_hda_codec_write(codec, 0x8, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x9, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		/* MW9 (21h), Mw2 (1ah), AOW0 (8h) */
+		snd_hda_codec_write(codec, 0x21, 0, AC_VERB_SET_POWER_STATE,
+				    imux_is_smixer ? AC_PWRST_D0 : parm);
+		if (spec->hp_independent_mode) {
+			/* PW4 (28h), MW3 (1bh), MUX1(34h), AOW4 (ch) */
+			parm = AC_PWRST_D3;
+			set_pin_power_state(codec, 0x28, &parm);
+			snd_hda_codec_write(codec, 0x1b, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+			snd_hda_codec_write(codec, 0x34, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+			snd_hda_codec_write(codec, 0xc, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+		}
+	} else if (spec->codec_type == VT1716S) {
+		unsigned int mono_out, present;
+		/* SW0 (17h) = stereo mixer */
+		imux_is_smixer = snd_hda_codec_read(
+			codec, 0x17, 0, AC_VERB_GET_CONNECT_SEL, 0x00) ==  5;
+		/* inputs */
+		/* PW 1/2/5 (1ah/1bh/1eh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x1a, &parm);
+		set_pin_power_state(codec, 0x1b, &parm);
+		set_pin_power_state(codec, 0x1e, &parm);
+		if (imux_is_smixer)
+			parm = AC_PWRST_D0;
+		/* SW0 (17h), AIW0(13h) */
+		snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x13, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x1e, &parm);
+		/* PW11 (22h) */
+		if (spec->dmic_enabled)
+			set_pin_power_state(codec, 0x22, &parm);
+		else
+			snd_hda_codec_write(
+				codec, 0x22, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+		/* SW2(26h), AIW1(14h) */
+		snd_hda_codec_write(codec, 0x26, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* outputs */
+		/* PW0 (19h), SW1 (18h), AOW1 (11h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x19, &parm);
+		/* Smart 5.1 PW2(1bh) */
+		if (spec->smart51_enabled)
+			set_pin_power_state(codec, 0x1b, &parm);
+		snd_hda_codec_write(codec, 0x18, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* PW7 (23h), SW3 (27h), AOW3 (25h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x23, &parm);
+		/* Smart 5.1 PW1(1ah) */
+		if (spec->smart51_enabled)
+			set_pin_power_state(codec, 0x1a, &parm);
+		snd_hda_codec_write(codec, 0x27, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* Smart 5.1 PW5(1eh) */
+		if (spec->smart51_enabled)
+			set_pin_power_state(codec, 0x1e, &parm);
+		snd_hda_codec_write(codec, 0x25, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* Mono out */
+		/* SW4(28h)->MW1(29h)-> PW12 (2ah)*/
+		present = snd_hda_jack_detect(codec, 0x1c);
+		if (present)
+			mono_out = 0;
+		else {
+			present = snd_hda_jack_detect(codec, 0x1d);
+			if (!spec->hp_independent_mode && present)
+				mono_out = 0;
+			else
+				mono_out = 1;
+		}
+		parm = mono_out ? AC_PWRST_D0 : AC_PWRST_D3;
+		snd_hda_codec_write(codec, 0x28, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x29, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+		snd_hda_codec_write(codec, 0x2a, 0, AC_VERB_SET_POWER_STATE,
+				    parm);
+
+		/* PW 3/4 (1ch/1dh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x1c, &parm);
+		set_pin_power_state(codec, 0x1d, &parm);
+		/* HP Independent Mode, power on AOW3 */
+		if (spec->hp_independent_mode)
+			snd_hda_codec_write(codec, 0x25, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+
+		/* force to D0 for internal Speaker */
+		/* MW0 (16h), AOW0 (10h) */
+		snd_hda_codec_write(codec, 0x16, 0, AC_VERB_SET_POWER_STATE,
+				    imux_is_smixer ? AC_PWRST_D0 : parm);
+		snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_POWER_STATE,
+				    mono_out ? AC_PWRST_D0 : parm);
+	} else if (spec->codec_type == VT2002P) {
+		unsigned int present;
+		/* MUX9 (1eh) = stereo mixer */
+		imux_is_smixer = snd_hda_codec_read(
+			codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 3;
+		/* inputs */
+		/* PW 5/6/7 (29h/2ah/2bh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x29, &parm);
+		set_pin_power_state(codec, 0x2a, &parm);
+		set_pin_power_state(codec, 0x2b, &parm);
+		if (imux_is_smixer)
+			parm = AC_PWRST_D0;
+		/* MUX9/10 (1eh/1fh), AIW 0/1 (10h/11h) */
+		snd_hda_codec_write(codec, 0x1e, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x1f, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x10, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x11, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+
+		/* outputs */
+		/* AOW0 (8h)*/
+		snd_hda_codec_write(codec, 0x8, 0,
+				    AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+
+		/* PW4 (26h), MW4 (1ch), MUX4(37h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x26, &parm);
+		snd_hda_codec_write(codec, 0x1c, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x37,
+				    0, AC_VERB_SET_POWER_STATE, parm);
+
+		/* PW1 (25h), MW1 (19h), MUX1(35h), AOW1 (9h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x25, &parm);
+		snd_hda_codec_write(codec, 0x19, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x35, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		if (spec->hp_independent_mode)	{
+			snd_hda_codec_write(codec, 0x9, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+		}
+
+		/* Class-D */
+		/* PW0 (24h), MW0(18h), MUX0(34h) */
+		present = snd_hda_jack_detect(codec, 0x25);
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x24, &parm);
+		if (present) {
+			snd_hda_codec_write(
+				codec, 0x18, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+			snd_hda_codec_write(
+				codec, 0x34, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+		} else {
+			snd_hda_codec_write(
+				codec, 0x18, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+			snd_hda_codec_write(
+				codec, 0x34, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+		}
+
+		/* Mono Out */
+		/* PW15 (31h), MW8(17h), MUX8(3bh) */
+		present = snd_hda_jack_detect(codec, 0x26);
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x31, &parm);
+		if (present) {
+			snd_hda_codec_write(
+				codec, 0x17, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+			snd_hda_codec_write(
+				codec, 0x3b, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+		} else {
+			snd_hda_codec_write(
+				codec, 0x17, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+			snd_hda_codec_write(
+				codec, 0x3b, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+		}
+
+		/* MW9 (21h) */
+		if (imux_is_smixer || !is_aa_path_mute(codec))
+			snd_hda_codec_write(
+				codec, 0x21, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+		else
+			snd_hda_codec_write(
+				codec, 0x21, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+	} else if (spec->codec_type == VT1812) {
+		unsigned int present;
+		/* MUX10 (1eh) = stereo mixer */
+		imux_is_smixer = snd_hda_codec_read(
+			codec, 0x1e, 0, AC_VERB_GET_CONNECT_SEL, 0x00) == 5;
+		/* inputs */
+		/* PW 5/6/7 (29h/2ah/2bh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x29, &parm);
+		set_pin_power_state(codec, 0x2a, &parm);
+		set_pin_power_state(codec, 0x2b, &parm);
+		if (imux_is_smixer)
+			parm = AC_PWRST_D0;
+		/* MUX10/11 (1eh/1fh), AIW 0/1 (10h/11h) */
+		snd_hda_codec_write(codec, 0x1e, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x1f, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x10, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x11, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+
+		/* outputs */
+		/* AOW0 (8h)*/
+		snd_hda_codec_write(codec, 0x8, 0,
+				    AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+
+		/* PW4 (28h), MW4 (18h), MUX4(38h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x28, &parm);
+		snd_hda_codec_write(codec, 0x18, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x38, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+
+		/* PW1 (25h), MW1 (15h), MUX1(35h), AOW1 (9h) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x25, &parm);
+		snd_hda_codec_write(codec, 0x15, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x35, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		if (spec->hp_independent_mode)	{
+			snd_hda_codec_write(codec, 0x9, 0,
+					    AC_VERB_SET_POWER_STATE, parm);
+		}
+
+		/* Internal Speaker */
+		/* PW0 (24h), MW0(14h), MUX0(34h) */
+		present = snd_hda_jack_detect(codec, 0x25);
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x24, &parm);
+		if (present) {
+			snd_hda_codec_write(codec, 0x14, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D3);
+			snd_hda_codec_write(codec, 0x34, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D3);
+		} else {
+			snd_hda_codec_write(codec, 0x14, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D0);
+			snd_hda_codec_write(codec, 0x34, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D0);
+		}
+		/* Mono Out */
+		/* PW13 (31h), MW13(1ch), MUX13(3ch), MW14(3eh) */
+		present = snd_hda_jack_detect(codec, 0x28);
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x31, &parm);
+		if (present) {
+			snd_hda_codec_write(codec, 0x1c, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D3);
+			snd_hda_codec_write(codec, 0x3c, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D3);
+			snd_hda_codec_write(codec, 0x3e, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D3);
+		} else {
+			snd_hda_codec_write(codec, 0x1c, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D0);
+			snd_hda_codec_write(codec, 0x3c, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D0);
+			snd_hda_codec_write(codec, 0x3e, 0,
+					    AC_VERB_SET_POWER_STATE,
+					    AC_PWRST_D0);
+		}
+
+		/* PW15 (33h), MW15 (1dh), MUX15(3dh) */
+		parm = AC_PWRST_D3;
+		set_pin_power_state(codec, 0x33, &parm);
+		snd_hda_codec_write(codec, 0x1d, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+		snd_hda_codec_write(codec, 0x3d, 0,
+				    AC_VERB_SET_POWER_STATE, parm);
+
+		/* MW9 (21h) */
+		if (imux_is_smixer || !is_aa_path_mute(codec))
+			snd_hda_codec_write(
+				codec, 0x21, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+		else
+			snd_hda_codec_write(
+				codec, 0x21, 0,
+				AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+	}
+}
+
 /*
  * input MUX handling
  */
@@ -395,6 +1063,14 @@
 
 	if (!spec->mux_nids[adc_idx])
 		return -EINVAL;
+	/* switch to D0 beofre change index */
+	if (snd_hda_codec_read(codec, spec->mux_nids[adc_idx], 0,
+			       AC_VERB_GET_POWER_STATE, 0x00) != AC_PWRST_D0)
+		snd_hda_codec_write(codec, spec->mux_nids[adc_idx], 0,
+				    AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+	/* update jack power state */
+	set_jack_power_state(codec);
+
 	return snd_hda_input_mux_put(codec, spec->input_mux, ucontrol,
 				     spec->mux_nids[adc_idx],
 				     &spec->cur_mux[adc_idx]);
@@ -413,16 +1089,74 @@
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct via_spec *spec = codec->spec;
-	hda_nid_t nid = spec->autocfg.hp_pins[0];
-	unsigned int pinsel = snd_hda_codec_read(codec, nid, 0,
-						 AC_VERB_GET_CONNECT_SEL,
-						 0x00);
+	hda_nid_t nid;
+	unsigned int pinsel;
 
+	switch (spec->codec_type) {
+	case VT1718S:
+		nid = 0x34;
+		break;
+	case VT2002P:
+		nid = 0x35;
+		break;
+	case VT1812:
+		nid = 0x3d;
+		break;
+	default:
+		nid = spec->autocfg.hp_pins[0];
+		break;
+	}
+	/* use !! to translate conn sel 2 for VT1718S */
+	pinsel = !!snd_hda_codec_read(codec, nid, 0,
+				      AC_VERB_GET_CONNECT_SEL,
+				      0x00);
 	ucontrol->value.enumerated.item[0] = pinsel;
 
 	return 0;
 }
 
+static void activate_ctl(struct hda_codec *codec, const char *name, int active)
+{
+	struct snd_kcontrol *ctl = snd_hda_find_mixer_ctl(codec, name);
+	if (ctl) {
+		ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+		ctl->vd[0].access |= active
+			? 0 : SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+		snd_ctl_notify(codec->bus->card,
+			       SNDRV_CTL_EVENT_MASK_VALUE, &ctl->id);
+	}
+}
+
+static int update_side_mute_status(struct hda_codec *codec)
+{
+	/* mute side channel */
+	struct via_spec *spec = codec->spec;
+	unsigned int parm = spec->hp_independent_mode
+		? AMP_OUT_MUTE : AMP_OUT_UNMUTE;
+	hda_nid_t sw3;
+
+	switch (spec->codec_type) {
+	case VT1708:
+		sw3 = 0x1b;
+		break;
+	case VT1709_10CH:
+		sw3 = 0x29;
+		break;
+	case VT1708B_8CH:
+	case VT1708S:
+		sw3 = 0x27;
+		break;
+	default:
+		sw3 = 0;
+		break;
+	}
+
+	if (sw3)
+		snd_hda_codec_write(codec, sw3, 0, AC_VERB_SET_AMP_GAIN_MUTE,
+				    parm);
+	return 0;
+}
+
 static int via_independent_hp_put(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_value *ucontrol)
 {
@@ -430,47 +1164,46 @@
 	struct via_spec *spec = codec->spec;
 	hda_nid_t nid = spec->autocfg.hp_pins[0];
 	unsigned int pinsel = ucontrol->value.enumerated.item[0];
-	unsigned int con_nid = snd_hda_codec_read(codec, nid, 0,
-					 AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
+	/* Get Independent Mode index of headphone pin widget */
+	spec->hp_independent_mode = spec->hp_independent_mode_index == pinsel
+		? 1 : 0;
 
-	if (con_nid == spec->multiout.hp_nid) {
-		if (pinsel == 0) {
-			if (!spec->hp_independent_mode) {
-				if (spec->multiout.num_dacs > 1)
-					spec->multiout.num_dacs -= 1;
-				spec->hp_independent_mode = 1;
-			}
-		} else if (pinsel == 1) {
-		       if (spec->hp_independent_mode) {
-				if (spec->multiout.num_dacs > 1)
-					spec->multiout.num_dacs += 1;
-				spec->hp_independent_mode = 0;
-		       }
-		}
-	} else {
-		if (pinsel == 0) {
-			if (spec->hp_independent_mode) {
-				if (spec->multiout.num_dacs > 1)
-					spec->multiout.num_dacs += 1;
-				spec->hp_independent_mode = 0;
-			}
-		} else if (pinsel == 1) {
-		       if (!spec->hp_independent_mode) {
-				if (spec->multiout.num_dacs > 1)
-					spec->multiout.num_dacs -= 1;
-				spec->hp_independent_mode = 1;
-		       }
-		}
+	switch (spec->codec_type) {
+	case VT1718S:
+		nid = 0x34;
+		pinsel = pinsel ? 2 : 0; /* indep HP use AOW4 (index 2) */
+		spec->multiout.num_dacs = 4;
+		break;
+	case VT2002P:
+		nid = 0x35;
+		break;
+	case VT1812:
+		nid = 0x3d;
+		break;
+	default:
+		nid = spec->autocfg.hp_pins[0];
+		break;
 	}
-	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL,
-			    pinsel);
+	snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, pinsel);
 
-	if (spec->multiout.hp_nid &&
-	    spec->multiout.hp_nid != spec->multiout.dac_nids[HDA_FRONT])
-			snd_hda_codec_setup_stream(codec,
-						   spec->multiout.hp_nid,
-						   0, 0, 0);
+	if (spec->multiout.hp_nid && spec->multiout.hp_nid
+	    != spec->multiout.dac_nids[HDA_FRONT])
+		snd_hda_codec_setup_stream(codec, spec->multiout.hp_nid,
+					   0, 0, 0);
 
+	update_side_mute_status(codec);
+	/* update HP volume/swtich active state */
+	if (spec->codec_type == VT1708S
+	    || spec->codec_type == VT1702
+	    || spec->codec_type == VT1718S
+	    || spec->codec_type == VT1716S
+	    || spec->codec_type == VT2002P
+	    || spec->codec_type == VT1812) {
+		activate_ctl(codec, "Headphone Playback Volume",
+			     spec->hp_independent_mode);
+		activate_ctl(codec, "Headphone Playback Switch",
+			     spec->hp_independent_mode);
+	}
 	return 0;
 }
 
@@ -486,6 +1219,175 @@
 	{ } /* end */
 };
 
+static void notify_aa_path_ctls(struct hda_codec *codec)
+{
+	int i;
+	struct snd_ctl_elem_id id;
+	const char *labels[] = {"Mic", "Front Mic", "Line"};
+
+	memset(&id, 0, sizeof(id));
+	id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+	for (i = 0; i < ARRAY_SIZE(labels); i++) {
+		sprintf(id.name, "%s Playback Volume", labels[i]);
+		snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE,
+			       &id);
+	}
+}
+
+static void mute_aa_path(struct hda_codec *codec, int mute)
+{
+	struct via_spec *spec = codec->spec;
+	hda_nid_t  nid_mixer;
+	int start_idx;
+	int end_idx;
+	int i;
+	/* get nid of MW0 and start & end index */
+	switch (spec->codec_type) {
+	case VT1708:
+		nid_mixer = 0x17;
+		start_idx = 2;
+		end_idx = 4;
+		break;
+	case VT1709_10CH:
+	case VT1709_6CH:
+		nid_mixer = 0x18;
+		start_idx = 2;
+		end_idx = 4;
+		break;
+	case VT1708B_8CH:
+	case VT1708B_4CH:
+	case VT1708S:
+	case VT1716S:
+		nid_mixer = 0x16;
+		start_idx = 2;
+		end_idx = 4;
+		break;
+	default:
+		return;
+	}
+	/* check AA path's mute status */
+	for (i = start_idx; i <= end_idx; i++) {
+		int val = mute ? HDA_AMP_MUTE : HDA_AMP_UNMUTE;
+		snd_hda_codec_amp_stereo(codec, nid_mixer, HDA_INPUT, i,
+					 HDA_AMP_MUTE, val);
+	}
+}
+static int is_smart51_pins(struct via_spec *spec, hda_nid_t pin)
+{
+	int res = 0;
+	int index;
+	for (index = AUTO_PIN_MIC; index < AUTO_PIN_FRONT_LINE; index++) {
+		if (pin == spec->autocfg.input_pins[index]) {
+			res = 1;
+			break;
+		}
+	}
+	return res;
+}
+
+static int via_smart51_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int via_smart51_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct via_spec *spec = codec->spec;
+	int index[] = { AUTO_PIN_MIC, AUTO_PIN_FRONT_MIC, AUTO_PIN_LINE };
+	int on = 1;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(index); i++) {
+		hda_nid_t nid = spec->autocfg.input_pins[index[i]];
+		if (nid) {
+			int ctl =
+			    snd_hda_codec_read(codec, nid, 0,
+					       AC_VERB_GET_PIN_WIDGET_CONTROL,
+					       0);
+			if (i == AUTO_PIN_FRONT_MIC
+			    && spec->hp_independent_mode
+			    && spec->codec_type != VT1718S)
+				continue; /* ignore FMic for independent HP */
+			if (ctl & AC_PINCTL_IN_EN
+			    && !(ctl & AC_PINCTL_OUT_EN))
+				on = 0;
+		}
+	}
+	*ucontrol->value.integer.value = on;
+	return 0;
+}
+
+static int via_smart51_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct via_spec *spec = codec->spec;
+	int out_in = *ucontrol->value.integer.value
+		? AC_PINCTL_OUT_EN : AC_PINCTL_IN_EN;
+	int index[] = { AUTO_PIN_MIC, AUTO_PIN_FRONT_MIC, AUTO_PIN_LINE };
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(index); i++) {
+		hda_nid_t nid = spec->autocfg.input_pins[index[i]];
+		if (i == AUTO_PIN_FRONT_MIC
+		    && spec->hp_independent_mode
+		    && spec->codec_type != VT1718S)
+			continue; /* don't retask FMic for independent HP */
+		if (nid) {
+			unsigned int parm = snd_hda_codec_read(
+				codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+			parm &= ~(AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+			parm |= out_in;
+			snd_hda_codec_write(codec, nid, 0,
+					    AC_VERB_SET_PIN_WIDGET_CONTROL,
+					    parm);
+			if (out_in == AC_PINCTL_OUT_EN) {
+				mute_aa_path(codec, 1);
+				notify_aa_path_ctls(codec);
+			}
+			if (spec->codec_type == VT1718S)
+				snd_hda_codec_amp_stereo(
+					codec, nid, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+					HDA_AMP_UNMUTE);
+		}
+		if (i == AUTO_PIN_FRONT_MIC) {
+			if (spec->codec_type == VT1708S
+			    || spec->codec_type == VT1716S) {
+				/* input = index 1 (AOW3) */
+				snd_hda_codec_write(
+					codec, nid, 0,
+					AC_VERB_SET_CONNECT_SEL, 1);
+				snd_hda_codec_amp_stereo(
+					codec, nid, HDA_OUTPUT,
+					0, HDA_AMP_MUTE, HDA_AMP_UNMUTE);
+			}
+		}
+	}
+	spec->smart51_enabled = *ucontrol->value.integer.value;
+	set_jack_power_state(codec);
+	return 1;
+}
+
+static struct snd_kcontrol_new via_smart51_mixer[] = {
+	{
+	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	 .name = "Smart 5.1",
+	 .count = 1,
+	 .info = via_smart51_info,
+	 .get = via_smart51_get,
+	 .put = via_smart51_put,
+	 },
+	{}			/* end */
+};
+
 /* capture mixer elements */
 static struct snd_kcontrol_new vt1708_capture_mixer[] = {
 	HDA_CODEC_VOLUME("Capture Volume", 0x15, 0x0, HDA_INPUT),
@@ -506,6 +1408,112 @@
 	},
 	{ } /* end */
 };
+
+/* check AA path's mute statue */
+static int is_aa_path_mute(struct hda_codec *codec)
+{
+	int mute = 1;
+	hda_nid_t  nid_mixer;
+	int start_idx;
+	int end_idx;
+	int i;
+	struct via_spec *spec = codec->spec;
+	/* get nid of MW0 and start & end index */
+	switch (spec->codec_type) {
+	case VT1708B_8CH:
+	case VT1708B_4CH:
+	case VT1708S:
+	case VT1716S:
+		nid_mixer = 0x16;
+		start_idx = 2;
+		end_idx = 4;
+		break;
+	case VT1702:
+		nid_mixer = 0x1a;
+		start_idx = 1;
+		end_idx = 3;
+		break;
+	case VT1718S:
+		nid_mixer = 0x21;
+		start_idx = 1;
+		end_idx = 3;
+		break;
+	case VT2002P:
+	case VT1812:
+		nid_mixer = 0x21;
+		start_idx = 0;
+		end_idx = 2;
+		break;
+	default:
+		return 0;
+	}
+	/* check AA path's mute status */
+	for (i = start_idx; i <= end_idx; i++) {
+		unsigned int con_list = snd_hda_codec_read(
+			codec, nid_mixer, 0, AC_VERB_GET_CONNECT_LIST, i/4*4);
+		int shift = 8 * (i % 4);
+		hda_nid_t nid_pin = (con_list & (0xff << shift)) >> shift;
+		unsigned int defconf = snd_hda_codec_get_pincfg(codec, nid_pin);
+		if (get_defcfg_connect(defconf) == AC_JACK_PORT_COMPLEX) {
+			/* check mute status while the pin is connected */
+			int mute_l = snd_hda_codec_amp_read(codec, nid_mixer, 0,
+							    HDA_INPUT, i) >> 7;
+			int mute_r = snd_hda_codec_amp_read(codec, nid_mixer, 1,
+							    HDA_INPUT, i) >> 7;
+			if (!mute_l || !mute_r) {
+				mute = 0;
+				break;
+			}
+		}
+	}
+	return mute;
+}
+
+/* enter/exit analog low-current mode */
+static void analog_low_current_mode(struct hda_codec *codec, int stream_idle)
+{
+	struct via_spec *spec = codec->spec;
+	static int saved_stream_idle = 1; /* saved stream idle status */
+	int enable = is_aa_path_mute(codec);
+	unsigned int verb = 0;
+	unsigned int parm = 0;
+
+	if (stream_idle == -1)	/* stream status did not change */
+		enable = enable && saved_stream_idle;
+	else {
+		enable = enable && stream_idle;
+		saved_stream_idle = stream_idle;
+	}
+
+	/* decide low current mode's verb & parameter */
+	switch (spec->codec_type) {
+	case VT1708B_8CH:
+	case VT1708B_4CH:
+		verb = 0xf70;
+		parm = enable ? 0x02 : 0x00; /* 0x02: 2/3x, 0x00: 1x */
+		break;
+	case VT1708S:
+	case VT1718S:
+	case VT1716S:
+		verb = 0xf73;
+		parm = enable ? 0x51 : 0xe1; /* 0x51: 4/28x, 0xe1: 1x */
+		break;
+	case VT1702:
+		verb = 0xf73;
+		parm = enable ? 0x01 : 0x1d; /* 0x01: 4/40x, 0x1d: 1x */
+		break;
+	case VT2002P:
+	case VT1812:
+		verb = 0xf93;
+		parm = enable ? 0x00 : 0xe0; /* 0x00: 4/40x, 0xe0: 1x */
+		break;
+	default:
+		return;		/* other codecs are not supported */
+	}
+	/* send verb */
+	snd_hda_codec_write(codec, codec->afg, 0, verb, parm);
+}
+
 /*
  * generic initialization of ADC, input mixers and output mixers
  */
@@ -534,9 +1542,9 @@
 	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
-	
-	/* Setup default input to PW4 */
-	{0x20, AC_VERB_SET_CONNECT_SEL, 0x1},
+
+	/* Setup default input MW0 to PW4 */
+	{0x20, AC_VERB_SET_CONNECT_SEL, 0},
 	/* PW9 Output enable */
 	{0x25, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	{ }
@@ -547,30 +1555,13 @@
 				 struct snd_pcm_substream *substream)
 {
 	struct via_spec *spec = codec->spec;
+	int idle = substream->pstr->substream_opened == 1
+		&& substream->ref_count == 0;
+	analog_low_current_mode(codec, idle);
 	return snd_hda_multi_out_analog_open(codec, &spec->multiout, substream,
 					     hinfo);
 }
 
-static int via_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
-				    struct hda_codec *codec,
-				    unsigned int stream_tag,
-				    unsigned int format,
-				    struct snd_pcm_substream *substream)
-{
-	struct via_spec *spec = codec->spec;
-	return snd_hda_multi_out_analog_prepare(codec, &spec->multiout,
-						stream_tag, format, substream);
-}
-
-static int via_playback_pcm_cleanup(struct hda_pcm_stream *hinfo,
-				    struct hda_codec *codec,
-				    struct snd_pcm_substream *substream)
-{
-	struct via_spec *spec = codec->spec;
-	return snd_hda_multi_out_analog_cleanup(codec, &spec->multiout);
-}
-
-
 static void playback_multi_pcm_prep_0(struct hda_codec *codec,
 				      unsigned int stream_tag,
 				      unsigned int format,
@@ -615,8 +1606,8 @@
 	snd_hda_codec_setup_stream(codec, nids[HDA_FRONT], stream_tag,
 				   0, format);
 
-	if (mout->hp_nid && mout->hp_nid != nids[HDA_FRONT] &&
-	    !spec->hp_independent_mode)
+	if (mout->hp_nid && mout->hp_nid != nids[HDA_FRONT]
+	    && !spec->hp_independent_mode)
 		/* headphone out will just decode front left/right (stereo) */
 		snd_hda_codec_setup_stream(codec, mout->hp_nid, stream_tag,
 					   0, format);
@@ -658,7 +1649,7 @@
 			snd_hda_codec_setup_stream(codec, mout->hp_nid,
 						   stream_tag, 0, format);
 	}
-
+	vt1708_start_hp_work(spec);
 	return 0;
 }
 
@@ -698,7 +1689,7 @@
 			snd_hda_codec_setup_stream(codec, mout->hp_nid,
 						   0, 0, 0);
 	}
-
+	vt1708_stop_hp_work(spec);
 	return 0;
 }
 
@@ -779,7 +1770,7 @@
 };
 
 static struct hda_pcm_stream vt1708_pcm_analog_s16_playback = {
-	.substreams = 1,
+	.substreams = 2,
 	.channels_min = 2,
 	.channels_max = 8,
 	.nid = 0x10, /* NID to query formats and rates */
@@ -790,8 +1781,8 @@
 	.formats = SNDRV_PCM_FMTBIT_S16_LE,
 	.ops = {
 		.open = via_playback_pcm_open,
-		.prepare = via_playback_pcm_prepare,
-		.cleanup = via_playback_pcm_cleanup
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup
 	},
 };
 
@@ -853,6 +1844,11 @@
 		if (err < 0)
 			return err;
 	}
+
+	/* init power states */
+	set_jack_power_state(codec);
+	analog_low_current_mode(codec, 1);
+
 	via_free_kctls(codec); /* no longer needed */
 	return 0;
 }
@@ -866,8 +1862,10 @@
 	codec->pcm_info = info;
 
 	info->name = spec->stream_name_analog;
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK] = *(spec->stream_analog_playback);
-	info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->multiout.dac_nids[0];
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK] =
+		*(spec->stream_analog_playback);
+	info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid =
+		spec->multiout.dac_nids[0];
 	info->stream[SNDRV_PCM_STREAM_CAPTURE] = *(spec->stream_analog_capture);
 	info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adc_nids[0];
 
@@ -904,20 +1902,58 @@
 		return;
 
 	via_free_kctls(codec);
+	vt1708_stop_hp_work(spec);
 	kfree(codec->spec);
 }
 
 /* mute internal speaker if HP is plugged */
 static void via_hp_automute(struct hda_codec *codec)
 {
-	unsigned int present;
+	unsigned int present = 0;
 	struct via_spec *spec = codec->spec;
 
-	present = snd_hda_codec_read(codec, spec->autocfg.hp_pins[0], 0,
-				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
-	snd_hda_codec_amp_stereo(codec, spec->autocfg.line_out_pins[0],
-				 HDA_OUTPUT, 0, HDA_AMP_MUTE,
-				 present ? HDA_AMP_MUTE : 0);
+	present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]);
+
+	if (!spec->hp_independent_mode) {
+		struct snd_ctl_elem_id id;
+		/* auto mute */
+		snd_hda_codec_amp_stereo(
+			codec, spec->autocfg.line_out_pins[0], HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+		/* notify change */
+		memset(&id, 0, sizeof(id));
+		id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+		strcpy(id.name, "Front Playback Switch");
+		snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE,
+			       &id);
+	}
+}
+
+/* mute mono out if HP or Line out is plugged */
+static void via_mono_automute(struct hda_codec *codec)
+{
+	unsigned int hp_present, lineout_present;
+	struct via_spec *spec = codec->spec;
+
+	if (spec->codec_type != VT1716S)
+		return;
+
+	lineout_present = snd_hda_jack_detect(codec,
+					      spec->autocfg.line_out_pins[0]);
+
+	/* Mute Mono Out if Line Out is plugged */
+	if (lineout_present) {
+		snd_hda_codec_amp_stereo(
+			codec, 0x2A, HDA_OUTPUT, 0, HDA_AMP_MUTE, HDA_AMP_MUTE);
+		return;
+	}
+
+	hp_present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]);
+
+	if (!spec->hp_independent_mode)
+		snd_hda_codec_amp_stereo(
+			codec, 0x2A, HDA_OUTPUT, 0, HDA_AMP_MUTE,
+			hp_present ? HDA_AMP_MUTE : 0);
 }
 
 static void via_gpio_control(struct hda_codec *codec)
@@ -968,15 +2004,83 @@
 	}
 }
 
+/* mute Internal-Speaker if HP is plugged */
+static void via_speaker_automute(struct hda_codec *codec)
+{
+	unsigned int hp_present;
+	struct via_spec *spec = codec->spec;
+
+	if (spec->codec_type != VT2002P && spec->codec_type != VT1812)
+		return;
+
+	hp_present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]);
+
+	if (!spec->hp_independent_mode) {
+		struct snd_ctl_elem_id id;
+		snd_hda_codec_amp_stereo(
+			codec, spec->autocfg.speaker_pins[0], HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, hp_present ? HDA_AMP_MUTE : 0);
+		/* notify change */
+		memset(&id, 0, sizeof(id));
+		id.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+		strcpy(id.name, "Speaker Playback Switch");
+		snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE,
+			       &id);
+	}
+}
+
+/* mute line-out and internal speaker if HP is plugged */
+static void via_hp_bind_automute(struct hda_codec *codec)
+{
+	/* use long instead of int below just to avoid an internal compiler
+	 * error with gcc 4.0.x
+	 */
+	unsigned long hp_present, present = 0;
+	struct via_spec *spec = codec->spec;
+	int i;
+
+	if (!spec->autocfg.hp_pins[0] || !spec->autocfg.line_out_pins[0])
+		return;
+
+	hp_present = snd_hda_jack_detect(codec, spec->autocfg.hp_pins[0]);
+
+	present = snd_hda_jack_detect(codec, spec->autocfg.line_out_pins[0]);
+
+	if (!spec->hp_independent_mode) {
+		/* Mute Line-Outs */
+		for (i = 0; i < spec->autocfg.line_outs; i++)
+			snd_hda_codec_amp_stereo(
+				codec, spec->autocfg.line_out_pins[i],
+				HDA_OUTPUT, 0,
+				HDA_AMP_MUTE, hp_present ? HDA_AMP_MUTE : 0);
+		if (hp_present)
+			present = hp_present;
+	}
+	/* Speakers */
+	for (i = 0; i < spec->autocfg.speaker_outs; i++)
+		snd_hda_codec_amp_stereo(
+			codec, spec->autocfg.speaker_pins[i], HDA_OUTPUT, 0,
+			HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+}
+
+
 /* unsolicited event for jack sensing */
 static void via_unsol_event(struct hda_codec *codec,
 				  unsigned int res)
 {
 	res >>= 26;
-	if (res == VIA_HP_EVENT)
+	if (res & VIA_HP_EVENT)
 		via_hp_automute(codec);
-	else if (res == VIA_GPIO_EVENT)
+	if (res & VIA_GPIO_EVENT)
 		via_gpio_control(codec);
+	if (res & VIA_JACK_EVENT)
+		set_jack_power_state(codec);
+	if (res & VIA_MONO_EVENT)
+		via_mono_automute(codec);
+	if (res & VIA_SPEAKER_EVENT)
+		via_speaker_automute(codec);
+	if (res & VIA_BIND_HP_EVENT)
+		via_hp_bind_automute(codec);
 }
 
 static int via_init(struct hda_codec *codec)
@@ -986,6 +2090,10 @@
 	for (i = 0; i < spec->num_iverbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
 
+	spec->codec_type = get_codec_type(codec);
+	if (spec->codec_type == VT1708BCE)
+		spec->codec_type = VT1708S; /* VT1708BCE & VT1708S are almost
+					       same */
 	/* Lydia Add for EAPD enable */
 	if (!spec->dig_in_nid) { /* No Digital In connection */
 		if (spec->dig_in_pin) {
@@ -1003,9 +2111,18 @@
 	if (spec->slave_dig_outs[0])
 		codec->slave_dig_outs = spec->slave_dig_outs;
 
- 	return 0;
+	return 0;
 }
 
+#ifdef SND_HDA_NEEDS_RESUME
+static int via_suspend(struct hda_codec *codec, pm_message_t state)
+{
+	struct via_spec *spec = codec->spec;
+	vt1708_stop_hp_work(spec);
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 static int via_check_power_status(struct hda_codec *codec, hda_nid_t nid)
 {
@@ -1021,6 +2138,9 @@
 	.build_pcms = via_build_pcms,
 	.init = via_init,
 	.free = via_free,
+#ifdef SND_HDA_NEEDS_RESUME
+	.suspend = via_suspend,
+#endif
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	.check_power_status = via_check_power_status,
 #endif
@@ -1036,8 +2156,8 @@
 	spec->multiout.num_dacs = cfg->line_outs;
 
 	spec->multiout.dac_nids = spec->private_dac_nids;
- 	
-	for(i = 0; i < 4; i++) {
+
+	for (i = 0; i < 4; i++) {
 		nid = cfg->line_out_pins[i];
 		if (nid) {
 			/* config dac list */
@@ -1067,7 +2187,7 @@
 {
 	char name[32];
 	static const char *chname[4] = { "Front", "Surround", "C/LFE", "Side" };
-	hda_nid_t nid, nid_vol = 0;
+	hda_nid_t nid, nid_vol, nid_vols[] = {0x17, 0x19, 0x1a, 0x1b};
 	int i, err;
 
 	for (i = 0; i <= AUTO_SEQ_SIDE; i++) {
@@ -1075,9 +2195,8 @@
 
 		if (!nid)
 			continue;
-		
-		if (i != AUTO_SEQ_FRONT)
-			nid_vol = 0x18 + i;
+
+		nid_vol = nid_vols[i];
 
 		if (i == AUTO_SEQ_CENLFE) {
 			/* Center/LFE */
@@ -1105,21 +2224,21 @@
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
-		} else if (i == AUTO_SEQ_FRONT){
+		} else if (i == AUTO_SEQ_FRONT) {
 			/* add control to mixer index 0 */
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 					      "Master Front Playback Volume",
-					      HDA_COMPOSE_AMP_VAL(0x17, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_INPUT));
 			if (err < 0)
 				return err;
 			err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
 					      "Master Front Playback Switch",
-					      HDA_COMPOSE_AMP_VAL(0x17, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_INPUT));
 			if (err < 0)
 				return err;
-			
+
 			/* add control to PW3 */
 			sprintf(name, "%s Playback Volume", chname[i]);
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name,
@@ -1178,6 +2297,7 @@
 		return 0;
 
 	spec->multiout.hp_nid = VT1708_HP_NID; /* AOW3 */
+	spec->hp_independent_mode_index = 1;
 
 	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 			      "Headphone Playback Volume",
@@ -1218,7 +2338,7 @@
 		case 0x1d: /* Mic */
 			idx = 2;
 			break;
-				
+
 		case 0x1e: /* Line In */
 			idx = 3;
 			break;
@@ -1231,8 +2351,7 @@
 			idx = 1;
 			break;
 		}
-		err = via_new_analog_input(spec, cfg->input_pins[i], labels[i],
-					   idx, 0x17);
+		err = via_new_analog_input(spec, labels[i], idx, 0x17);
 		if (err < 0)
 			return err;
 		imux->items[imux->num_items].label = labels[i];
@@ -1260,16 +2379,60 @@
 	def_conf = snd_hda_codec_get_pincfg(codec, nid);
 	seqassoc = (unsigned char) get_defcfg_association(def_conf);
 	seqassoc = (seqassoc << 4) | get_defcfg_sequence(def_conf);
-	if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE) {
-		if (seqassoc == 0xff) {
-			def_conf = def_conf & (~(AC_JACK_PORT_BOTH << 30));
-			snd_hda_codec_set_pincfg(codec, nid, def_conf);
-		}
+	if (get_defcfg_connect(def_conf) == AC_JACK_PORT_NONE
+	    && (seqassoc == 0xf0 || seqassoc == 0xff)) {
+		def_conf = def_conf & (~(AC_JACK_PORT_BOTH << 30));
+		snd_hda_codec_set_pincfg(codec, nid, def_conf);
 	}
 
 	return;
 }
 
+static int vt1708_jack_detectect_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct via_spec *spec = codec->spec;
+
+	if (spec->codec_type != VT1708)
+		return 0;
+	spec->vt1708_jack_detectect =
+		!((snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8) & 0x1);
+	ucontrol->value.integer.value[0] = spec->vt1708_jack_detectect;
+	return 0;
+}
+
+static int vt1708_jack_detectect_put(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct via_spec *spec = codec->spec;
+	int change;
+
+	if (spec->codec_type != VT1708)
+		return 0;
+	spec->vt1708_jack_detectect = ucontrol->value.integer.value[0];
+	change = (0x1 & (snd_hda_codec_read(codec, 0x1, 0, 0xf84, 0) >> 8))
+		== !spec->vt1708_jack_detectect;
+	if (spec->vt1708_jack_detectect) {
+		mute_aa_path(codec, 1);
+		notify_aa_path_ctls(codec);
+	}
+	return change;
+}
+
+static struct snd_kcontrol_new vt1708_jack_detectect[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Jack Detect",
+		.count = 1,
+		.info = snd_ctl_boolean_mono_info,
+		.get = vt1708_jack_detectect_get,
+		.put = vt1708_jack_detectect_put,
+	},
+	{} /* end */
+};
+
 static int vt1708_parse_auto_config(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
@@ -1297,6 +2460,10 @@
 	err = vt1708_auto_create_analog_input_ctls(spec, &spec->autocfg);
 	if (err < 0)
 		return err;
+	/* add jack detect on/off control */
+	err = snd_hda_add_new_ctls(codec, vt1708_jack_detectect);
+	if (err < 0)
+		return err;
 
 	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
 
@@ -1316,19 +2483,44 @@
 	if (spec->hp_mux)
 		spec->mixers[spec->num_mixers++] = via_hp_mixer;
 
+	spec->mixers[spec->num_mixers++] = via_smart51_mixer;
 	return 1;
 }
 
 /* init callback for auto-configuration model -- overriding the default init */
 static int via_auto_init(struct hda_codec *codec)
 {
+	struct via_spec *spec = codec->spec;
+
 	via_init(codec);
 	via_auto_init_multi_out(codec);
 	via_auto_init_hp_out(codec);
 	via_auto_init_analog_input(codec);
+	if (spec->codec_type == VT2002P || spec->codec_type == VT1812) {
+		via_hp_bind_automute(codec);
+	} else {
+		via_hp_automute(codec);
+		via_speaker_automute(codec);
+	}
+
 	return 0;
 }
 
+static void vt1708_update_hp_jack_state(struct work_struct *work)
+{
+	struct via_spec *spec = container_of(work, struct via_spec,
+					     vt1708_hp_work.work);
+	if (spec->codec_type != VT1708)
+		return;
+	/* if jack state toggled */
+	if (spec->vt1708_hp_present
+	    != snd_hda_jack_detect(spec->codec, spec->autocfg.hp_pins[0])) {
+		spec->vt1708_hp_present ^= 1;
+		via_hp_automute(spec->codec);
+	}
+	vt1708_start_hp_work(spec);
+}
+
 static int get_mux_nids(struct hda_codec *codec)
 {
 	struct via_spec *spec = codec->spec;
@@ -1378,7 +2570,7 @@
 		       "from BIOS.  Using genenic mode...\n");
 	}
 
-	
+
 	spec->stream_name_analog = "VT1708 Analog";
 	spec->stream_analog_playback = &vt1708_pcm_analog_playback;
 	/* disable 32bit format on VT1708 */
@@ -1390,7 +2582,7 @@
 	spec->stream_digital_playback = &vt1708_pcm_digital_playback;
 	spec->stream_digital_capture = &vt1708_pcm_digital_capture;
 
-	
+
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1708_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1708_adc_nids);
@@ -1405,7 +2597,8 @@
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	spec->loopback.amplist = vt1708_loopbacks;
 #endif
-
+	spec->codec = codec;
+	INIT_DELAYED_WORK(&spec->vt1708_hp_work, vt1708_update_hp_jack_state);
 	return 0;
 }
 
@@ -1433,7 +2626,8 @@
 };
 
 static struct hda_verb vt1709_uniwill_init_verbs[] = {
-	{0x20, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_HP_EVENT},
+	{0x20, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT},
 	{ }
 };
 
@@ -1473,8 +2667,8 @@
 	{0x1f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 
-	/* Set input of PW4 as AOW4 */
-	{0x20, AC_VERB_SET_CONNECT_SEL, 0x1},
+	/* Set input of PW4 as MW0 */
+	{0x20, AC_VERB_SET_CONNECT_SEL, 0},
 	/* PW9 Output enable */
 	{0x24, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	{ }
@@ -1487,8 +2681,8 @@
 	.nid = 0x10, /* NID to query formats and rates */
 	.ops = {
 		.open = via_playback_pcm_open,
-		.prepare = via_playback_pcm_prepare,
-		.cleanup = via_playback_pcm_cleanup
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
 	},
 };
 
@@ -1499,8 +2693,8 @@
 	.nid = 0x10, /* NID to query formats and rates */
 	.ops = {
 		.open = via_playback_pcm_open,
-		.prepare = via_playback_pcm_prepare,
-		.cleanup = via_playback_pcm_cleanup
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
 	},
 };
 
@@ -1575,11 +2769,11 @@
 		spec->multiout.dac_nids[cfg->line_outs] = 0x28; /* AOW4 */
 
 	} else if (cfg->line_outs == 3) { /* 6 channels */
-		for(i = 0; i < cfg->line_outs; i++) {
+		for (i = 0; i < cfg->line_outs; i++) {
 			nid = cfg->line_out_pins[i];
 			if (nid) {
 				/* config dac list */
-				switch(i) {
+				switch (i) {
 				case AUTO_SEQ_FRONT:
 					/* AOW0 */
 					spec->multiout.dac_nids[i] = 0x10;
@@ -1608,56 +2802,58 @@
 {
 	char name[32];
 	static const char *chname[4] = { "Front", "Surround", "C/LFE", "Side" };
-	hda_nid_t nid = 0;
+	hda_nid_t nid, nid_vol, nid_vols[] = {0x18, 0x1a, 0x1b, 0x29};
 	int i, err;
 
 	for (i = 0; i <= AUTO_SEQ_SIDE; i++) {
 		nid = cfg->line_out_pins[i];
 
-		if (!nid)	
+		if (!nid)
 			continue;
 
+		nid_vol = nid_vols[i];
+
 		if (i == AUTO_SEQ_CENLFE) {
 			/* Center/LFE */
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 					      "Center Playback Volume",
-					      HDA_COMPOSE_AMP_VAL(0x1b, 1, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 1, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 					      "LFE Playback Volume",
-					      HDA_COMPOSE_AMP_VAL(0x1b, 2, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
 			err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
 					      "Center Playback Switch",
-					      HDA_COMPOSE_AMP_VAL(0x1b, 1, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 1, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
 			err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
 					      "LFE Playback Switch",
-					      HDA_COMPOSE_AMP_VAL(0x1b, 2, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
-		} else if (i == AUTO_SEQ_FRONT){
-			/* add control to mixer index 0 */
+		} else if (i == AUTO_SEQ_FRONT) {
+			/* ADD control to mixer index 0 */
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 					      "Master Front Playback Volume",
-					      HDA_COMPOSE_AMP_VAL(0x18, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_INPUT));
 			if (err < 0)
 				return err;
 			err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
 					      "Master Front Playback Switch",
-					      HDA_COMPOSE_AMP_VAL(0x18, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_INPUT));
 			if (err < 0)
 				return err;
-			
+
 			/* add control to PW3 */
 			sprintf(name, "%s Playback Volume", chname[i]);
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name,
@@ -1674,26 +2870,26 @@
 		} else if (i == AUTO_SEQ_SURROUND) {
 			sprintf(name, "%s Playback Volume", chname[i]);
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name,
-					      HDA_COMPOSE_AMP_VAL(0x1a, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
 			sprintf(name, "%s Playback Switch", chname[i]);
 			err = via_add_control(spec, VIA_CTL_WIDGET_MUTE, name,
-					      HDA_COMPOSE_AMP_VAL(0x1a, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
 		} else if (i == AUTO_SEQ_SIDE) {
 			sprintf(name, "%s Playback Volume", chname[i]);
 			err = via_add_control(spec, VIA_CTL_WIDGET_VOL, name,
-					      HDA_COMPOSE_AMP_VAL(0x29, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
 			sprintf(name, "%s Playback Switch", chname[i]);
 			err = via_add_control(spec, VIA_CTL_WIDGET_MUTE, name,
-					      HDA_COMPOSE_AMP_VAL(0x29, 3, 0,
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0,
 								  HDA_OUTPUT));
 			if (err < 0)
 				return err;
@@ -1714,6 +2910,7 @@
 		spec->multiout.hp_nid = VT1709_HP_DAC_NID;
 	else if (spec->multiout.num_dacs == 3) /* 6 channels */
 		spec->multiout.hp_nid = 0;
+	spec->hp_independent_mode_index = 1;
 
 	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 			      "Headphone Playback Volume",
@@ -1752,7 +2949,7 @@
 		case 0x1d: /* Mic */
 			idx = 2;
 			break;
-				
+
 		case 0x1e: /* Line In */
 			idx = 3;
 			break;
@@ -1765,8 +2962,7 @@
 			idx = 1;
 			break;
 		}
-		err = via_new_analog_input(spec, cfg->input_pins[i], labels[i],
-					   idx, 0x18);
+		err = via_new_analog_input(spec, labels[i], idx, 0x18);
 		if (err < 0)
 			return err;
 		imux->items[imux->num_items].label = labels[i];
@@ -1816,6 +3012,7 @@
 	if (spec->hp_mux)
 		spec->mixers[spec->num_mixers++] = via_hp_mixer;
 
+	spec->mixers[spec->num_mixers++] = via_smart51_mixer;
 	return 1;
 }
 
@@ -1861,7 +3058,7 @@
 	spec->stream_digital_playback = &vt1709_pcm_digital_playback;
 	spec->stream_digital_capture = &vt1709_pcm_digital_capture;
 
-	
+
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1709_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
@@ -1955,7 +3152,7 @@
 	spec->stream_digital_playback = &vt1709_pcm_digital_playback;
 	spec->stream_digital_capture = &vt1709_pcm_digital_capture;
 
-	
+
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1709_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1709_adc_nids);
@@ -2024,7 +3221,7 @@
 	{0x27, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
 
 	/* Setup default input to PW4 */
-	{0x1d, AC_VERB_SET_CONNECT_SEL, 0x1},
+	{0x1d, AC_VERB_SET_CONNECT_SEL, 0},
 	/* PW9 Output enable */
 	{0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	/* PW10 Input enable */
@@ -2068,10 +3265,29 @@
 };
 
 static struct hda_verb vt1708B_uniwill_init_verbs[] = {
-	{0x1D, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_HP_EVENT},
+	{0x1d, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT},
+	{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1e, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x22, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x23, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
 	{ }
 };
 
+static int via_pcm_open_close(struct hda_pcm_stream *hinfo,
+			      struct hda_codec *codec,
+			      struct snd_pcm_substream *substream)
+{
+	int idle = substream->pstr->substream_opened == 1
+		&& substream->ref_count == 0;
+
+	analog_low_current_mode(codec, idle);
+	return 0;
+}
+
 static struct hda_pcm_stream vt1708B_8ch_pcm_analog_playback = {
 	.substreams = 2,
 	.channels_min = 2,
@@ -2080,7 +3296,8 @@
 	.ops = {
 		.open = via_playback_pcm_open,
 		.prepare = via_playback_multi_pcm_prepare,
-		.cleanup = via_playback_multi_pcm_cleanup
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close
 	},
 };
 
@@ -2102,8 +3319,10 @@
 	.channels_max = 2,
 	.nid = 0x13, /* NID to query formats and rates */
 	.ops = {
+		.open = via_pcm_open_close,
 		.prepare = via_capture_pcm_prepare,
-		.cleanup = via_capture_pcm_cleanup
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close
 	},
 };
 
@@ -2260,6 +3479,7 @@
 		return 0;
 
 	spec->multiout.hp_nid = VT1708B_HP_NID; /* AOW3 */
+	spec->hp_independent_mode_index = 1;
 
 	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 			      "Headphone Playback Volume",
@@ -2313,8 +3533,7 @@
 			idx = 1;
 			break;
 		}
-		err = via_new_analog_input(spec, cfg->input_pins[i], labels[i],
-					   idx, 0x16);
+		err = via_new_analog_input(spec, labels[i], idx, 0x16);
 		if (err < 0)
 			return err;
 		imux->items[imux->num_items].label = labels[i];
@@ -2364,6 +3583,7 @@
 	if (spec->hp_mux)
 		spec->mixers[spec->num_mixers++] = via_hp_mixer;
 
+	spec->mixers[spec->num_mixers++] = via_smart51_mixer;
 	return 1;
 }
 
@@ -2376,12 +3596,14 @@
 	{ } /* end */
 };
 #endif
-
+static int patch_vt1708S(struct hda_codec *codec);
 static int patch_vt1708B_8ch(struct hda_codec *codec)
 {
 	struct via_spec *spec;
 	int err;
 
+	if (get_codec_type(codec) == VT1708BCE)
+		return patch_vt1708S(codec);
 	/* create a codec specific record */
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
 	if (spec == NULL)
@@ -2483,29 +3705,15 @@
 
 /* Patch for VT1708S */
 
-/* VT1708S software backdoor based override for buggy hardware micboost
- * setting */
-#define MIC_BOOST_VOLUME(xname, nid) {				\
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,		\
-	.name = xname,					\
-	.index = 0,					\
-	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |	\
-	SNDRV_CTL_ELEM_ACCESS_TLV_READ |		\
-	SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK,		\
-	.info = mic_boost_volume_info,			\
-	.get = snd_hda_mixer_amp_volume_get,		\
-	.put = snd_hda_mixer_amp_volume_put,		\
-	.tlv = { .c = mic_boost_tlv },			\
-	.private_value = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT) }
-
 /* capture mixer elements */
 static struct snd_kcontrol_new vt1708S_capture_mixer[] = {
 	HDA_CODEC_VOLUME("Capture Volume", 0x13, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE("Capture Switch", 0x13, 0x0, HDA_INPUT),
 	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x14, 0x0, HDA_INPUT),
 	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x14, 0x0, HDA_INPUT),
-	MIC_BOOST_VOLUME("Mic Boost Capture Volume", 0x1A),
-	MIC_BOOST_VOLUME("Front Mic Boost Capture Volume", 0x1E),
+	HDA_CODEC_VOLUME("Mic Boost Capture Volume", 0x1A, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost Capture Volume", 0x1E, 0x0,
+			 HDA_INPUT),
 	{
 		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 		/* The multiple "Capture Source" controls confuse alsamixer
@@ -2542,11 +3750,21 @@
 	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	/* Enable Mic Boost Volume backdoor */
 	{0x1, 0xf98, 0x1},
+	/* don't bybass mixer */
+	{0x1, 0xf88, 0xc0},
 	{ }
 };
 
 static struct hda_verb vt1708S_uniwill_init_verbs[] = {
-	{0x1D, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_HP_EVENT},
+	{0x1d, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT},
+	{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1e, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x22, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x23, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
 	{ }
 };
 
@@ -2557,8 +3775,9 @@
 	.nid = 0x10, /* NID to query formats and rates */
 	.ops = {
 		.open = via_playback_pcm_open,
-		.prepare = via_playback_pcm_prepare,
-		.cleanup = via_playback_pcm_cleanup
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close
 	},
 };
 
@@ -2568,8 +3787,10 @@
 	.channels_max = 2,
 	.nid = 0x13, /* NID to query formats and rates */
 	.ops = {
+		.open = via_pcm_open_close,
 		.prepare = via_capture_pcm_prepare,
-		.cleanup = via_capture_pcm_cleanup
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close
 	},
 };
 
@@ -2726,6 +3947,7 @@
 		return 0;
 
 	spec->multiout.hp_nid = VT1708S_HP_NID; /* AOW3 */
+	spec->hp_independent_mode_index = 1;
 
 	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 			      "Headphone Playback Volume",
@@ -2780,8 +4002,7 @@
 			idx = 1;
 			break;
 		}
-		err = via_new_analog_input(spec, cfg->input_pins[i], labels[i],
-					   idx, 0x16);
+		err = via_new_analog_input(spec, labels[i], idx, 0x16);
 		if (err < 0)
 			return err;
 		imux->items[imux->num_items].label = labels[i];
@@ -2852,6 +4073,7 @@
 	if (spec->hp_mux)
 		spec->mixers[spec->num_mixers++] = via_hp_mixer;
 
+	spec->mixers[spec->num_mixers++] = via_smart51_mixer;
 	return 1;
 }
 
@@ -2865,6 +4087,16 @@
 };
 #endif
 
+static void override_mic_boost(struct hda_codec *codec, hda_nid_t pin,
+			       int offset, int num_steps, int step_size)
+{
+	snd_hda_override_amp_caps(codec, pin, HDA_INPUT,
+				  (offset << AC_AMPCAP_OFFSET_SHIFT) |
+				  (num_steps << AC_AMPCAP_NUM_STEPS_SHIFT) |
+				  (step_size << AC_AMPCAP_STEP_SIZE_SHIFT) |
+				  (0 << AC_AMPCAP_MUTE_SHIFT));
+}
+
 static int patch_vt1708S(struct hda_codec *codec)
 {
 	struct via_spec *spec;
@@ -2890,17 +4122,25 @@
 	spec->init_verbs[spec->num_iverbs++] = vt1708S_volume_init_verbs;
 	spec->init_verbs[spec->num_iverbs++] = vt1708S_uniwill_init_verbs;
 
-	spec->stream_name_analog = "VT1708S Analog";
+	if (codec->vendor_id == 0x11060440)
+		spec->stream_name_analog = "VT1818S Analog";
+	else
+		spec->stream_name_analog = "VT1708S Analog";
 	spec->stream_analog_playback = &vt1708S_pcm_analog_playback;
 	spec->stream_analog_capture = &vt1708S_pcm_analog_capture;
 
-	spec->stream_name_digital = "VT1708S Digital";
+	if (codec->vendor_id == 0x11060440)
+		spec->stream_name_digital = "VT1818S Digital";
+	else
+		spec->stream_name_digital = "VT1708S Digital";
 	spec->stream_digital_playback = &vt1708S_pcm_digital_playback;
 
 	if (!spec->adc_nids && spec->input_mux) {
 		spec->adc_nids = vt1708S_adc_nids;
 		spec->num_adc_nids = ARRAY_SIZE(vt1708S_adc_nids);
 		get_mux_nids(codec);
+		override_mic_boost(codec, 0x1a, 0, 3, 40);
+		override_mic_boost(codec, 0x1e, 0, 3, 40);
 		spec->mixers[spec->num_mixers] = vt1708S_capture_mixer;
 		spec->num_mixers++;
 	}
@@ -2913,6 +4153,16 @@
 	spec->loopback.amplist = vt1708S_loopbacks;
 #endif
 
+	/* correct names for VT1708BCE */
+	if (get_codec_type(codec) == VT1708BCE)	{
+		kfree(codec->chip_name);
+		codec->chip_name = kstrdup("VT1708BCE", GFP_KERNEL);
+		snprintf(codec->bus->card->mixername,
+			 sizeof(codec->bus->card->mixername),
+			 "%s %s", codec->vendor_name, codec->chip_name);
+		spec->stream_name_analog = "VT1708BCE Analog";
+		spec->stream_name_digital = "VT1708BCE Digital";
+	}
 	return 0;
 }
 
@@ -2967,12 +4217,20 @@
 	/* PW6 PW7 Output enable */
 	{0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
 	{0x1C, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* mixer enable */
+	{0x1, 0xF88, 0x3},
+	/* GPIO 0~2 */
+	{0x1, 0xF82, 0x3F},
 	{ }
 };
 
 static struct hda_verb vt1702_uniwill_init_verbs[] = {
-	{0x01, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_GPIO_EVENT},
-	{0x17, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_HP_EVENT},
+	{0x17, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT},
+	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x16, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
 	{ }
 };
 
@@ -2984,7 +4242,8 @@
 	.ops = {
 		.open = via_playback_pcm_open,
 		.prepare = via_playback_multi_pcm_prepare,
-		.cleanup = via_playback_multi_pcm_cleanup
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close
 	},
 };
 
@@ -2994,8 +4253,10 @@
 	.channels_max = 2,
 	.nid = 0x12, /* NID to query formats and rates */
 	.ops = {
+		.open = via_pcm_open_close,
 		.prepare = via_capture_pcm_prepare,
-		.cleanup = via_capture_pcm_cleanup
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close
 	},
 };
 
@@ -3065,12 +4326,13 @@
 
 static int vt1702_auto_create_hp_ctls(struct via_spec *spec, hda_nid_t pin)
 {
-	int err;
-
+	int err, i;
+	struct hda_input_mux *imux;
+	static const char *texts[] = { "ON", "OFF", NULL};
 	if (!pin)
 		return 0;
-
 	spec->multiout.hp_nid = 0x1D;
+	spec->hp_independent_mode_index = 0;
 
 	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
 			      "Headphone Playback Volume",
@@ -3084,8 +4346,18 @@
 	if (err < 0)
 		return err;
 
-	create_hp_imux(spec);
+	imux = &spec->private_imux[1];
 
+	/* for hp mode select */
+	i = 0;
+	while (texts[i] != NULL)	{
+		imux->items[imux->num_items].label =  texts[i];
+		imux->items[imux->num_items].index = i;
+		imux->num_items++;
+		i++;
+	}
+
+	spec->hp_mux = &spec->private_imux[1];
 	return 0;
 }
 
@@ -3121,8 +4393,7 @@
 			idx = 3;
 			break;
 		}
-		err = via_new_analog_input(spec, cfg->input_pins[i],
-					   labels[i], idx, 0x1A);
+		err = via_new_analog_input(spec, labels[i], idx, 0x1A);
 		if (err < 0)
 			return err;
 		imux->items[imux->num_items].label = labels[i];
@@ -3152,6 +4423,12 @@
 	err = vt1702_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
 	if (err < 0)
 		return err;
+	/* limit AA path volume to 0 dB */
+	snd_hda_override_amp_caps(codec, 0x1A, HDA_INPUT,
+				  (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+				  (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+				  (0x5 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+				  (1 << AC_AMPCAP_MUTE_SHIFT));
 	err = vt1702_auto_create_analog_input_ctls(spec, &spec->autocfg);
 	if (err < 0)
 		return err;
@@ -3185,8 +4462,6 @@
 {
 	struct via_spec *spec;
 	int err;
-	unsigned int response;
-	unsigned char control;
 
 	/* create a codec specific record */
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -3231,17 +4506,1638 @@
 	spec->loopback.amplist = vt1702_loopbacks;
 #endif
 
-	/* Open backdoor */
-	response = snd_hda_codec_read(codec, codec->afg, 0, 0xF8C, 0);
-	control = (unsigned char)(response & 0xff);
-	control |= 0x3;
-	snd_hda_codec_write(codec,  codec->afg, 0, 0xF88, control);
+	return 0;
+}
 
-	/* Enable GPIO 0&1 for volume&mute control */
-	/* Enable GPIO 2 for DMIC-DATA */
-	response = snd_hda_codec_read(codec, codec->afg, 0, 0xF84, 0);
-	control = (unsigned char)((response >> 16) & 0x3f);
-	snd_hda_codec_write(codec,  codec->afg, 0, 0xF82, control);
+/* Patch for VT1718S */
+
+/* capture mixer elements */
+static struct snd_kcontrol_new vt1718S_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x10, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x10, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x11, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x11, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost Capture Volume", 0x2b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost Capture Volume", 0x29, 0x0,
+			 HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		/* The multiple "Capture Source" controls confuse alsamixer
+		 * So call somewhat different..
+		 */
+		.name = "Input Source",
+		.count = 2,
+		.info = via_mux_enum_info,
+		.get = via_mux_enum_get,
+		.put = via_mux_enum_put,
+	},
+	{ } /* end */
+};
+
+static struct hda_verb vt1718S_volume_init_verbs[] = {
+	/*
+	 * Unmute ADC0-1 and set the default input to mic-in
+	 */
+	{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+
+	/* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+	 * mixer widget
+	 */
+	/* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+
+	/* Setup default input of Front HP to MW9 */
+	{0x28, AC_VERB_SET_CONNECT_SEL, 0x1},
+	/* PW9 PW10 Output enable */
+	{0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
+	{0x2e, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
+	/* PW11 Input enable */
+	{0x2f, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_IN_EN},
+	/* Enable Boost Volume backdoor */
+	{0x1, 0xf88, 0x8},
+	/* MW0/1/2/3/4: un-mute index 0 (AOWx), mute index 1 (MW9) */
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	/* set MUX1 = 2 (AOW4), MUX2 = 1 (AOW3) */
+	{0x34, AC_VERB_SET_CONNECT_SEL, 0x2},
+	{0x35, AC_VERB_SET_CONNECT_SEL, 0x1},
+	/* Unmute MW4's index 0 */
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{ }
+};
+
+
+static struct hda_verb vt1718S_uniwill_init_verbs[] = {
+	{0x28, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT},
+	{0x24, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x25, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x26, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x27, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x29, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x2a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{ }
+};
+
+static struct hda_pcm_stream vt1718S_pcm_analog_playback = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 10,
+	.nid = 0x8, /* NID to query formats and rates */
+	.ops = {
+		.open = via_playback_pcm_open,
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt1718S_pcm_analog_capture = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0x10, /* NID to query formats and rates */
+	.ops = {
+		.open = via_pcm_open_close,
+		.prepare = via_capture_pcm_prepare,
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt1718S_pcm_digital_playback = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	/* NID is set in via_build_pcms */
+	.ops = {
+		.open = via_dig_playback_pcm_open,
+		.close = via_dig_playback_pcm_close,
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
+	},
+};
+
+static struct hda_pcm_stream vt1718S_pcm_digital_capture = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int vt1718S_auto_fill_dac_nids(struct via_spec *spec,
+				     const struct auto_pin_cfg *cfg)
+{
+	int i;
+	hda_nid_t nid;
+
+	spec->multiout.num_dacs = cfg->line_outs;
+
+	spec->multiout.dac_nids = spec->private_dac_nids;
+
+	for (i = 0; i < 4; i++) {
+		nid = cfg->line_out_pins[i];
+		if (nid) {
+			/* config dac list */
+			switch (i) {
+			case AUTO_SEQ_FRONT:
+				spec->multiout.dac_nids[i] = 0x8;
+				break;
+			case AUTO_SEQ_CENLFE:
+				spec->multiout.dac_nids[i] = 0xa;
+				break;
+			case AUTO_SEQ_SURROUND:
+				spec->multiout.dac_nids[i] = 0x9;
+				break;
+			case AUTO_SEQ_SIDE:
+				spec->multiout.dac_nids[i] = 0xb;
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int vt1718S_auto_create_multi_out_ctls(struct via_spec *spec,
+					     const struct auto_pin_cfg *cfg)
+{
+	char name[32];
+	static const char *chname[4] = { "Front", "Surround", "C/LFE", "Side" };
+	hda_nid_t nid_vols[] = {0x8, 0x9, 0xa, 0xb};
+	hda_nid_t nid_mutes[] = {0x24, 0x25, 0x26, 0x27};
+	hda_nid_t nid, nid_vol, nid_mute = 0;
+	int i, err;
+
+	for (i = 0; i <= AUTO_SEQ_SIDE; i++) {
+		nid = cfg->line_out_pins[i];
+
+		if (!nid)
+			continue;
+		nid_vol = nid_vols[i];
+		nid_mute = nid_mutes[i];
+
+		if (i == AUTO_SEQ_CENLFE) {
+			/* Center/LFE */
+			err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+					      "Center Playback Volume",
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 1, 0,
+								  HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+					      "LFE Playback Volume",
+					      HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0,
+								  HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE,
+				"Center Playback Switch",
+				HDA_COMPOSE_AMP_VAL(nid_mute, 1, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE,
+				"LFE Playback Switch",
+				HDA_COMPOSE_AMP_VAL(nid_mute, 2, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+		} else if (i == AUTO_SEQ_FRONT) {
+			/* Front */
+			sprintf(name, "%s Playback Volume", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL, name,
+				HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			sprintf(name, "%s Playback Switch", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE, name,
+				HDA_COMPOSE_AMP_VAL(nid_mute, 3, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+		} else {
+			sprintf(name, "%s Playback Volume", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL, name,
+				HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			sprintf(name, "%s Playback Switch", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE, name,
+				HDA_COMPOSE_AMP_VAL(nid_mute, 3, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+		}
+	}
+	return 0;
+}
+
+static int vt1718S_auto_create_hp_ctls(struct via_spec *spec, hda_nid_t pin)
+{
+	int err;
+
+	if (!pin)
+		return 0;
+
+	spec->multiout.hp_nid = 0xc; /* AOW4 */
+	spec->hp_independent_mode_index = 1;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+			      "Headphone Playback Volume",
+			      HDA_COMPOSE_AMP_VAL(0xc, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
+			      "Headphone Playback Switch",
+			      HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	create_hp_imux(spec);
+	return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int vt1718S_auto_create_analog_input_ctls(struct via_spec *spec,
+						const struct auto_pin_cfg *cfg)
+{
+	static char *labels[] = {
+		"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux", NULL
+	};
+	struct hda_input_mux *imux = &spec->private_imux[0];
+	int i, err, idx = 0;
+
+	/* for internal loopback recording select */
+	imux->items[imux->num_items].label = "Stereo Mixer";
+	imux->items[imux->num_items].index = 5;
+	imux->num_items++;
+
+	for (i = 0; i < AUTO_PIN_LAST; i++) {
+		if (!cfg->input_pins[i])
+			continue;
+
+		switch (cfg->input_pins[i]) {
+		case 0x2b: /* Mic */
+			idx = 1;
+			break;
+
+		case 0x2a: /* Line In */
+			idx = 2;
+			break;
+
+		case 0x29: /* Front Mic */
+			idx = 3;
+			break;
+
+		case 0x2c: /* CD */
+			idx = 0;
+			break;
+		}
+		err = via_new_analog_input(spec, labels[i], idx, 0x21);
+		if (err < 0)
+			return err;
+		imux->items[imux->num_items].label = labels[i];
+		imux->items[imux->num_items].index = idx;
+		imux->num_items++;
+	}
+	return 0;
+}
+
+static int vt1718S_parse_auto_config(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int err;
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+
+	if (err < 0)
+		return err;
+	err = vt1718S_auto_fill_dac_nids(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+	if (!spec->autocfg.line_outs && !spec->autocfg.hp_pins[0])
+		return 0; /* can't find valid BIOS pin config */
+
+	err = vt1718S_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+	err = vt1718S_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+	if (err < 0)
+		return err;
+	err = vt1718S_auto_create_analog_input_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+	fill_dig_outs(codec);
+
+	if (spec->autocfg.dig_in_pin && codec->vendor_id == 0x11060428)
+		spec->dig_in_nid = 0x13;
+
+	if (spec->kctls.list)
+		spec->mixers[spec->num_mixers++] = spec->kctls.list;
+
+	spec->input_mux = &spec->private_imux[0];
+
+	if (spec->hp_mux)
+		spec->mixers[spec->num_mixers++] = via_hp_mixer;
+
+	spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+
+	return 1;
+}
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static struct hda_amp_list vt1718S_loopbacks[] = {
+	{ 0x21, HDA_INPUT, 1 },
+	{ 0x21, HDA_INPUT, 2 },
+	{ 0x21, HDA_INPUT, 3 },
+	{ 0x21, HDA_INPUT, 4 },
+	{ } /* end */
+};
+#endif
+
+static int patch_vt1718S(struct hda_codec *codec)
+{
+	struct via_spec *spec;
+	int err;
+
+	/* create a codec specific record */
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	/* automatic parse from the BIOS config */
+	err = vt1718S_parse_auto_config(codec);
+	if (err < 0) {
+		via_free(codec);
+		return err;
+	} else if (!err) {
+		printk(KERN_INFO "hda_codec: Cannot set up configuration "
+		       "from BIOS.  Using genenic mode...\n");
+	}
+
+	spec->init_verbs[spec->num_iverbs++] = vt1718S_volume_init_verbs;
+	spec->init_verbs[spec->num_iverbs++] = vt1718S_uniwill_init_verbs;
+
+	if (codec->vendor_id == 0x11060441)
+		spec->stream_name_analog = "VT2020 Analog";
+	else if (codec->vendor_id == 0x11064441)
+		spec->stream_name_analog = "VT1828S Analog";
+	else
+		spec->stream_name_analog = "VT1718S Analog";
+	spec->stream_analog_playback = &vt1718S_pcm_analog_playback;
+	spec->stream_analog_capture = &vt1718S_pcm_analog_capture;
+
+	if (codec->vendor_id == 0x11060441)
+		spec->stream_name_digital = "VT2020 Digital";
+	else if (codec->vendor_id == 0x11064441)
+		spec->stream_name_digital = "VT1828S Digital";
+	else
+		spec->stream_name_digital = "VT1718S Digital";
+	spec->stream_digital_playback = &vt1718S_pcm_digital_playback;
+	if (codec->vendor_id == 0x11060428 || codec->vendor_id == 0x11060441)
+		spec->stream_digital_capture = &vt1718S_pcm_digital_capture;
+
+	if (!spec->adc_nids && spec->input_mux) {
+		spec->adc_nids = vt1718S_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(vt1718S_adc_nids);
+		get_mux_nids(codec);
+		override_mic_boost(codec, 0x2b, 0, 3, 40);
+		override_mic_boost(codec, 0x29, 0, 3, 40);
+		spec->mixers[spec->num_mixers] = vt1718S_capture_mixer;
+		spec->num_mixers++;
+	}
+
+	codec->patch_ops = via_patch_ops;
+
+	codec->patch_ops.init = via_auto_init;
+	codec->patch_ops.unsol_event = via_unsol_event;
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	spec->loopback.amplist = vt1718S_loopbacks;
+#endif
+
+	return 0;
+}
+
+/* Patch for VT1716S */
+
+static int vt1716s_dmic_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+static int vt1716s_dmic_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	int index = 0;
+
+	index = snd_hda_codec_read(codec, 0x26, 0,
+					       AC_VERB_GET_CONNECT_SEL, 0);
+	if (index != -1)
+		*ucontrol->value.integer.value = index;
+
+	return 0;
+}
+
+static int vt1716s_dmic_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct via_spec *spec = codec->spec;
+	int index = *ucontrol->value.integer.value;
+
+	snd_hda_codec_write(codec, 0x26, 0,
+					       AC_VERB_SET_CONNECT_SEL, index);
+	spec->dmic_enabled = index;
+	set_jack_power_state(codec);
+
+	return 1;
+}
+
+/* capture mixer elements */
+static struct snd_kcontrol_new vt1716S_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x13, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x13, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x14, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x14, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost Capture Volume", 0x1A, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost Capture Volume", 0x1E, 0x0,
+			 HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input Source",
+		.count = 1,
+		.info = via_mux_enum_info,
+		.get = via_mux_enum_get,
+		.put = via_mux_enum_put,
+	},
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new vt1716s_dmic_mixer[] = {
+	HDA_CODEC_VOLUME("Digital Mic Capture Volume", 0x22, 0x0, HDA_INPUT),
+	{
+	 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	 .name = "Digital Mic Capture Switch",
+	 .count = 1,
+	 .info = vt1716s_dmic_info,
+	 .get = vt1716s_dmic_get,
+	 .put = vt1716s_dmic_put,
+	 },
+	{}			/* end */
+};
+
+
+/* mono-out mixer elements */
+static struct snd_kcontrol_new vt1716S_mono_out_mixer[] = {
+	HDA_CODEC_MUTE("Mono Playback Switch", 0x2a, 0x0, HDA_OUTPUT),
+	{ } /* end */
+};
+
+static struct hda_verb vt1716S_volume_init_verbs[] = {
+	/*
+	 * Unmute ADC0-1 and set the default input to mic-in
+	 */
+	{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+
+	/* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+	 * mixer widget
+	 */
+	/* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
+	/* MUX Indices: Stereo Mixer = 5 */
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x5},
+
+	/* Setup default input of PW4 to MW0 */
+	{0x1d, AC_VERB_SET_CONNECT_SEL, 0x0},
+
+	/* Setup default input of SW1 as MW0 */
+	{0x18, AC_VERB_SET_CONNECT_SEL, 0x1},
+
+	/* Setup default input of SW4 as AOW0 */
+	{0x28, AC_VERB_SET_CONNECT_SEL, 0x1},
+
+	/* PW9 PW10 Output enable */
+	{0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+
+	/* Unmute SW1, PW12 */
+	{0x29, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x2a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* PW12 Output enable */
+	{0x2a, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40},
+	/* Enable Boost Volume backdoor */
+	{0x1, 0xf8a, 0x80},
+	/* don't bybass mixer */
+	{0x1, 0xf88, 0xc0},
+	/* Enable mono output */
+	{0x1, 0xf90, 0x08},
+	{ }
+};
+
+
+static struct hda_verb vt1716S_uniwill_init_verbs[] = {
+	{0x1d, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT},
+	{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x1c, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_MONO_EVENT | VIA_JACK_EVENT},
+	{0x1e, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x23, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{ }
+};
+
+static struct hda_pcm_stream vt1716S_pcm_analog_playback = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 6,
+	.nid = 0x10, /* NID to query formats and rates */
+	.ops = {
+		.open = via_playback_pcm_open,
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt1716S_pcm_analog_capture = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0x13, /* NID to query formats and rates */
+	.ops = {
+		.open = via_pcm_open_close,
+		.prepare = via_capture_pcm_prepare,
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt1716S_pcm_digital_playback = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	/* NID is set in via_build_pcms */
+	.ops = {
+		.open = via_dig_playback_pcm_open,
+		.close = via_dig_playback_pcm_close,
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
+	},
+};
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int vt1716S_auto_fill_dac_nids(struct via_spec *spec,
+				      const struct auto_pin_cfg *cfg)
+{	int i;
+	hda_nid_t nid;
+
+	spec->multiout.num_dacs = cfg->line_outs;
+
+	spec->multiout.dac_nids = spec->private_dac_nids;
+
+	for (i = 0; i < 3; i++) {
+		nid = cfg->line_out_pins[i];
+		if (nid) {
+			/* config dac list */
+			switch (i) {
+			case AUTO_SEQ_FRONT:
+				spec->multiout.dac_nids[i] = 0x10;
+				break;
+			case AUTO_SEQ_CENLFE:
+				spec->multiout.dac_nids[i] = 0x25;
+				break;
+			case AUTO_SEQ_SURROUND:
+				spec->multiout.dac_nids[i] = 0x11;
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int vt1716S_auto_create_multi_out_ctls(struct via_spec *spec,
+					      const struct auto_pin_cfg *cfg)
+{
+	char name[32];
+	static const char *chname[3] = { "Front", "Surround", "C/LFE" };
+	hda_nid_t nid_vols[] = {0x10, 0x11, 0x25};
+	hda_nid_t nid_mutes[] = {0x1C, 0x18, 0x27};
+	hda_nid_t nid, nid_vol, nid_mute;
+	int i, err;
+
+	for (i = 0; i <= AUTO_SEQ_CENLFE; i++) {
+		nid = cfg->line_out_pins[i];
+
+		if (!nid)
+			continue;
+
+		nid_vol = nid_vols[i];
+		nid_mute = nid_mutes[i];
+
+		if (i == AUTO_SEQ_CENLFE) {
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL,
+				"Center Playback Volume",
+				HDA_COMPOSE_AMP_VAL(nid_vol, 1, 0, HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL,
+				"LFE Playback Volume",
+				HDA_COMPOSE_AMP_VAL(nid_vol, 2, 0, HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE,
+				"Center Playback Switch",
+				HDA_COMPOSE_AMP_VAL(nid_mute, 1, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE,
+				"LFE Playback Switch",
+				HDA_COMPOSE_AMP_VAL(nid_mute, 2, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+		} else if (i == AUTO_SEQ_FRONT) {
+
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL,
+				"Master Front Playback Volume",
+				HDA_COMPOSE_AMP_VAL(0x16, 3, 0, HDA_INPUT));
+			if (err < 0)
+				return err;
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE,
+				"Master Front Playback Switch",
+				HDA_COMPOSE_AMP_VAL(0x16, 3, 0, HDA_INPUT));
+			if (err < 0)
+				return err;
+
+			sprintf(name, "%s Playback Volume", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL, name,
+				HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			sprintf(name, "%s Playback Switch", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE, name,
+				HDA_COMPOSE_AMP_VAL(nid_mute, 3, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+		} else {
+			sprintf(name, "%s Playback Volume", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_VOL, name,
+				HDA_COMPOSE_AMP_VAL(nid_vol, 3, 0, HDA_OUTPUT));
+			if (err < 0)
+				return err;
+			sprintf(name, "%s Playback Switch", chname[i]);
+			err = via_add_control(
+				spec, VIA_CTL_WIDGET_MUTE, name,
+				HDA_COMPOSE_AMP_VAL(nid_mute, 3, 0,
+						    HDA_OUTPUT));
+			if (err < 0)
+				return err;
+		}
+	}
+	return 0;
+}
+
+static int vt1716S_auto_create_hp_ctls(struct via_spec *spec, hda_nid_t pin)
+{
+	int err;
+
+	if (!pin)
+		return 0;
+
+	spec->multiout.hp_nid = 0x25; /* AOW3 */
+	spec->hp_independent_mode_index = 1;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+			      "Headphone Playback Volume",
+			      HDA_COMPOSE_AMP_VAL(0x25, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
+			      "Headphone Playback Switch",
+			      HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	create_hp_imux(spec);
+	return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int vt1716S_auto_create_analog_input_ctls(struct via_spec *spec,
+						const struct auto_pin_cfg *cfg)
+{
+	static char *labels[] = {
+		"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux", NULL
+	};
+	struct hda_input_mux *imux = &spec->private_imux[0];
+	int i, err, idx = 0;
+
+	/* for internal loopback recording select */
+	imux->items[imux->num_items].label = "Stereo Mixer";
+	imux->items[imux->num_items].index = 5;
+	imux->num_items++;
+
+	for (i = 0; i < AUTO_PIN_LAST; i++) {
+		if (!cfg->input_pins[i])
+			continue;
+
+		switch (cfg->input_pins[i]) {
+		case 0x1a: /* Mic */
+			idx = 2;
+			break;
+
+		case 0x1b: /* Line In */
+			idx = 3;
+			break;
+
+		case 0x1e: /* Front Mic */
+			idx = 4;
+			break;
+
+		case 0x1f: /* CD */
+			idx = 1;
+			break;
+		}
+		err = via_new_analog_input(spec, labels[i], idx, 0x16);
+		if (err < 0)
+			return err;
+		imux->items[imux->num_items].label = labels[i];
+		imux->items[imux->num_items].index = idx-1;
+		imux->num_items++;
+	}
+	return 0;
+}
+
+static int vt1716S_parse_auto_config(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int err;
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+	if (err < 0)
+		return err;
+	err = vt1716S_auto_fill_dac_nids(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+	if (!spec->autocfg.line_outs && !spec->autocfg.hp_pins[0])
+		return 0; /* can't find valid BIOS pin config */
+
+	err = vt1716S_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+	err = vt1716S_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+	if (err < 0)
+		return err;
+	err = vt1716S_auto_create_analog_input_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+	fill_dig_outs(codec);
+
+	if (spec->kctls.list)
+		spec->mixers[spec->num_mixers++] = spec->kctls.list;
+
+	spec->input_mux = &spec->private_imux[0];
+
+	if (spec->hp_mux)
+		spec->mixers[spec->num_mixers++] = via_hp_mixer;
+
+	spec->mixers[spec->num_mixers++] = via_smart51_mixer;
+
+	return 1;
+}
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static struct hda_amp_list vt1716S_loopbacks[] = {
+	{ 0x16, HDA_INPUT, 1 },
+	{ 0x16, HDA_INPUT, 2 },
+	{ 0x16, HDA_INPUT, 3 },
+	{ 0x16, HDA_INPUT, 4 },
+	{ } /* end */
+};
+#endif
+
+static int patch_vt1716S(struct hda_codec *codec)
+{
+	struct via_spec *spec;
+	int err;
+
+	/* create a codec specific record */
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	/* automatic parse from the BIOS config */
+	err = vt1716S_parse_auto_config(codec);
+	if (err < 0) {
+		via_free(codec);
+		return err;
+	} else if (!err) {
+		printk(KERN_INFO "hda_codec: Cannot set up configuration "
+		       "from BIOS.  Using genenic mode...\n");
+	}
+
+	spec->init_verbs[spec->num_iverbs++]  = vt1716S_volume_init_verbs;
+	spec->init_verbs[spec->num_iverbs++] = vt1716S_uniwill_init_verbs;
+
+	spec->stream_name_analog = "VT1716S Analog";
+	spec->stream_analog_playback = &vt1716S_pcm_analog_playback;
+	spec->stream_analog_capture = &vt1716S_pcm_analog_capture;
+
+	spec->stream_name_digital = "VT1716S Digital";
+	spec->stream_digital_playback = &vt1716S_pcm_digital_playback;
+
+	if (!spec->adc_nids && spec->input_mux) {
+		spec->adc_nids = vt1716S_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(vt1716S_adc_nids);
+		get_mux_nids(codec);
+		override_mic_boost(codec, 0x1a, 0, 3, 40);
+		override_mic_boost(codec, 0x1e, 0, 3, 40);
+		spec->mixers[spec->num_mixers] = vt1716S_capture_mixer;
+		spec->num_mixers++;
+	}
+
+	spec->mixers[spec->num_mixers] = vt1716s_dmic_mixer;
+	spec->num_mixers++;
+
+	spec->mixers[spec->num_mixers++] = vt1716S_mono_out_mixer;
+
+	codec->patch_ops = via_patch_ops;
+
+	codec->patch_ops.init = via_auto_init;
+	codec->patch_ops.unsol_event = via_unsol_event;
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	spec->loopback.amplist = vt1716S_loopbacks;
+#endif
+
+	return 0;
+}
+
+/* for vt2002P */
+
+/* capture mixer elements */
+static struct snd_kcontrol_new vt2002P_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x10, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x10, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x11, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x11, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Mic Boost Capture Volume", 0x2b, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME("Front Mic Boost Capture Volume", 0x29, 0x0,
+			 HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		/* The multiple "Capture Source" controls confuse alsamixer
+		 * So call somewhat different..
+		 */
+		/* .name = "Capture Source", */
+		.name = "Input Source",
+		.count = 2,
+		.info = via_mux_enum_info,
+		.get = via_mux_enum_get,
+		.put = via_mux_enum_put,
+	},
+	{ } /* end */
+};
+
+static struct hda_verb vt2002P_volume_init_verbs[] = {
+	/*
+	 * Unmute ADC0-1 and set the default input to mic-in
+	 */
+	{0x8, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x9, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+
+	/* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+	 * mixer widget
+	 */
+	/* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
+	/* MUX Indices: Mic = 0 */
+	{0x1e, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x1f, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* PW9 Output enable */
+	{0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
+
+	/* Enable Boost Volume backdoor */
+	{0x1, 0xfb9, 0x24},
+
+	/* MW0/1/4/8: un-mute index 0 (MUXx), un-mute index 1 (MW9) */
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+	/* set MUX0/1/4/8 = 0 (AOW0) */
+	{0x34, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x35, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x37, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x3b, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* set PW0 index=0 (MW0) */
+	{0x24, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Enable AOW0 to MW9 */
+	{0x1, 0xfb8, 0x88},
+	{ }
+};
+
+
+static struct hda_verb vt2002P_uniwill_init_verbs[] = {
+	{0x25, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT},
+	{0x26, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT},
+	{0x29, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x2a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{ }
+};
+
+static struct hda_pcm_stream vt2002P_pcm_analog_playback = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0x8, /* NID to query formats and rates */
+	.ops = {
+		.open = via_playback_pcm_open,
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt2002P_pcm_analog_capture = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0x10, /* NID to query formats and rates */
+	.ops = {
+		.open = via_pcm_open_close,
+		.prepare = via_capture_pcm_prepare,
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt2002P_pcm_digital_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	/* NID is set in via_build_pcms */
+	.ops = {
+		.open = via_dig_playback_pcm_open,
+		.close = via_dig_playback_pcm_close,
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
+	},
+};
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int vt2002P_auto_fill_dac_nids(struct via_spec *spec,
+				      const struct auto_pin_cfg *cfg)
+{
+	spec->multiout.num_dacs = 1;
+	spec->multiout.dac_nids = spec->private_dac_nids;
+	if (cfg->line_out_pins[0])
+		spec->multiout.dac_nids[0] = 0x8;
+	return 0;
+}
+
+/* add playback controls from the parsed DAC table */
+static int vt2002P_auto_create_multi_out_ctls(struct via_spec *spec,
+					     const struct auto_pin_cfg *cfg)
+{
+	int err;
+
+	if (!cfg->line_out_pins[0])
+		return -1;
+
+
+	/* Line-Out: PortE */
+	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+			      "Master Front Playback Volume",
+			      HDA_COMPOSE_AMP_VAL(0x8, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+	err = via_add_control(spec, VIA_CTL_WIDGET_BIND_PIN_MUTE,
+			      "Master Front Playback Switch",
+			      HDA_COMPOSE_AMP_VAL(0x26, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int vt2002P_auto_create_hp_ctls(struct via_spec *spec, hda_nid_t pin)
+{
+	int err;
+
+	if (!pin)
+		return 0;
+
+	spec->multiout.hp_nid = 0x9;
+	spec->hp_independent_mode_index = 1;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+			      "Headphone Playback Volume",
+			      HDA_COMPOSE_AMP_VAL(
+				      spec->multiout.hp_nid, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
+			      "Headphone Playback Switch",
+			      HDA_COMPOSE_AMP_VAL(0x25, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	create_hp_imux(spec);
+	return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int vt2002P_auto_create_analog_input_ctls(struct via_spec *spec,
+						const struct auto_pin_cfg *cfg)
+{
+	static char *labels[] = {
+		"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux", NULL
+	};
+	struct hda_input_mux *imux = &spec->private_imux[0];
+	int i, err, idx = 0;
+
+	for (i = 0; i < AUTO_PIN_LAST; i++) {
+		if (!cfg->input_pins[i])
+			continue;
+
+		switch (cfg->input_pins[i]) {
+		case 0x2b: /* Mic */
+			idx = 0;
+			break;
+
+		case 0x2a: /* Line In */
+			idx = 1;
+			break;
+
+		case 0x29: /* Front Mic */
+			idx = 2;
+			break;
+		}
+		err = via_new_analog_input(spec, labels[i], idx, 0x21);
+		if (err < 0)
+			return err;
+		imux->items[imux->num_items].label = labels[i];
+		imux->items[imux->num_items].index = idx;
+		imux->num_items++;
+	}
+
+	/* build volume/mute control of loopback */
+	err = via_new_analog_input(spec, "Stereo Mixer", 3, 0x21);
+	if (err < 0)
+		return err;
+
+	/* for internal loopback recording select */
+	imux->items[imux->num_items].label = "Stereo Mixer";
+	imux->items[imux->num_items].index = 3;
+	imux->num_items++;
+
+	/* for digital mic select */
+	imux->items[imux->num_items].label = "Digital Mic";
+	imux->items[imux->num_items].index = 4;
+	imux->num_items++;
+
+	return 0;
+}
+
+static int vt2002P_parse_auto_config(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int err;
+
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+	if (err < 0)
+		return err;
+
+	err = vt2002P_auto_fill_dac_nids(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	if (!spec->autocfg.line_outs && !spec->autocfg.hp_pins[0])
+		return 0; /* can't find valid BIOS pin config */
+
+	err = vt2002P_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+	err = vt2002P_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+	if (err < 0)
+		return err;
+	err = vt2002P_auto_create_analog_input_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+	fill_dig_outs(codec);
+
+	if (spec->kctls.list)
+		spec->mixers[spec->num_mixers++] = spec->kctls.list;
+
+	spec->input_mux = &spec->private_imux[0];
+
+	if (spec->hp_mux)
+		spec->mixers[spec->num_mixers++] = via_hp_mixer;
+
+	return 1;
+}
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static struct hda_amp_list vt2002P_loopbacks[] = {
+	{ 0x21, HDA_INPUT, 0 },
+	{ 0x21, HDA_INPUT, 1 },
+	{ 0x21, HDA_INPUT, 2 },
+	{ } /* end */
+};
+#endif
+
+
+/* patch for vt2002P */
+static int patch_vt2002P(struct hda_codec *codec)
+{
+	struct via_spec *spec;
+	int err;
+
+	/* create a codec specific record */
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	/* automatic parse from the BIOS config */
+	err = vt2002P_parse_auto_config(codec);
+	if (err < 0) {
+		via_free(codec);
+		return err;
+	} else if (!err) {
+		printk(KERN_INFO "hda_codec: Cannot set up configuration "
+		       "from BIOS.  Using genenic mode...\n");
+	}
+
+	spec->init_verbs[spec->num_iverbs++]  = vt2002P_volume_init_verbs;
+	spec->init_verbs[spec->num_iverbs++] = vt2002P_uniwill_init_verbs;
+
+	spec->stream_name_analog = "VT2002P Analog";
+	spec->stream_analog_playback = &vt2002P_pcm_analog_playback;
+	spec->stream_analog_capture = &vt2002P_pcm_analog_capture;
+
+	spec->stream_name_digital = "VT2002P Digital";
+	spec->stream_digital_playback = &vt2002P_pcm_digital_playback;
+
+	if (!spec->adc_nids && spec->input_mux) {
+		spec->adc_nids = vt2002P_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(vt2002P_adc_nids);
+		get_mux_nids(codec);
+		override_mic_boost(codec, 0x2b, 0, 3, 40);
+		override_mic_boost(codec, 0x29, 0, 3, 40);
+		spec->mixers[spec->num_mixers] = vt2002P_capture_mixer;
+		spec->num_mixers++;
+	}
+
+	codec->patch_ops = via_patch_ops;
+
+	codec->patch_ops.init = via_auto_init;
+	codec->patch_ops.unsol_event = via_unsol_event;
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	spec->loopback.amplist = vt2002P_loopbacks;
+#endif
+
+	return 0;
+}
+
+/* for vt1812 */
+
+/* capture mixer elements */
+static struct snd_kcontrol_new vt1812_capture_mixer[] = {
+	HDA_CODEC_VOLUME("Capture Volume", 0x10, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x10, 0x0, HDA_INPUT),
+	HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x11, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x11, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mic Boost Capture Volume", 0x2b, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Front Mic Boost Capture Volume", 0x29, 0x0,
+		       HDA_INPUT),
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		/* The multiple "Capture Source" controls confuse alsamixer
+		 * So call somewhat different..
+		 */
+		.name = "Input Source",
+		.count = 2,
+		.info = via_mux_enum_info,
+		.get = via_mux_enum_get,
+		.put = via_mux_enum_put,
+	},
+	{ } /* end */
+};
+
+static struct hda_verb vt1812_volume_init_verbs[] = {
+	/*
+	 * Unmute ADC0-1 and set the default input to mic-in
+	 */
+	{0x8, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x9, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+
+
+	/* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback
+	 * mixer widget
+	 */
+	/* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+
+	/* MUX Indices: Mic = 0 */
+	{0x1e, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x1f, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* PW9 Output enable */
+	{0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN},
+
+	/* Enable Boost Volume backdoor */
+	{0x1, 0xfb9, 0x24},
+
+	/* MW0/1/4/13/15: un-mute index 0 (MUXx), un-mute index 1 (MW9) */
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{0x1d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+	/* set MUX0/1/4/13/15 = 0 (AOW0) */
+	{0x34, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x35, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x38, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x3c, AC_VERB_SET_CONNECT_SEL, 0},
+	{0x3d, AC_VERB_SET_CONNECT_SEL, 0},
+
+	/* Enable AOW0 to MW9 */
+	{0x1, 0xfb8, 0xa8},
+	{ }
+};
+
+
+static struct hda_verb vt1812_uniwill_init_verbs[] = {
+	{0x33, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT},
+	{0x25, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT },
+	{0x28, AC_VERB_SET_UNSOLICITED_ENABLE,
+	 AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT},
+	{0x29, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x2a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT},
+	{ }
+};
+
+static struct hda_pcm_stream vt1812_pcm_analog_playback = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0x8, /* NID to query formats and rates */
+	.ops = {
+		.open = via_playback_pcm_open,
+		.prepare = via_playback_multi_pcm_prepare,
+		.cleanup = via_playback_multi_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt1812_pcm_analog_capture = {
+	.substreams = 2,
+	.channels_min = 2,
+	.channels_max = 2,
+	.nid = 0x10, /* NID to query formats and rates */
+	.ops = {
+		.open = via_pcm_open_close,
+		.prepare = via_capture_pcm_prepare,
+		.cleanup = via_capture_pcm_cleanup,
+		.close = via_pcm_open_close,
+	},
+};
+
+static struct hda_pcm_stream vt1812_pcm_digital_playback = {
+	.substreams = 1,
+	.channels_min = 2,
+	.channels_max = 2,
+	/* NID is set in via_build_pcms */
+	.ops = {
+		.open = via_dig_playback_pcm_open,
+		.close = via_dig_playback_pcm_close,
+		.prepare = via_dig_playback_pcm_prepare,
+		.cleanup = via_dig_playback_pcm_cleanup
+	},
+};
+/* fill in the dac_nids table from the parsed pin configuration */
+static int vt1812_auto_fill_dac_nids(struct via_spec *spec,
+				     const struct auto_pin_cfg *cfg)
+{
+	spec->multiout.num_dacs = 1;
+	spec->multiout.dac_nids = spec->private_dac_nids;
+	if (cfg->line_out_pins[0])
+		spec->multiout.dac_nids[0] = 0x8;
+	return 0;
+}
+
+
+/* add playback controls from the parsed DAC table */
+static int vt1812_auto_create_multi_out_ctls(struct via_spec *spec,
+					     const struct auto_pin_cfg *cfg)
+{
+	int err;
+
+	if (!cfg->line_out_pins[0])
+		return -1;
+
+	/* Line-Out: PortE */
+	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+			      "Master Front Playback Volume",
+			      HDA_COMPOSE_AMP_VAL(0x8, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+	err = via_add_control(spec, VIA_CTL_WIDGET_BIND_PIN_MUTE,
+			      "Master Front Playback Switch",
+			      HDA_COMPOSE_AMP_VAL(0x28, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int vt1812_auto_create_hp_ctls(struct via_spec *spec, hda_nid_t pin)
+{
+	int err;
+
+	if (!pin)
+		return 0;
+
+	spec->multiout.hp_nid = 0x9;
+	spec->hp_independent_mode_index = 1;
+
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_VOL,
+			      "Headphone Playback Volume",
+			      HDA_COMPOSE_AMP_VAL(
+				      spec->multiout.hp_nid, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	err = via_add_control(spec, VIA_CTL_WIDGET_MUTE,
+			      "Headphone Playback Switch",
+			      HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+	if (err < 0)
+		return err;
+
+	create_hp_imux(spec);
+	return 0;
+}
+
+/* create playback/capture controls for input pins */
+static int vt1812_auto_create_analog_input_ctls(struct via_spec *spec,
+						const struct auto_pin_cfg *cfg)
+{
+	static char *labels[] = {
+		"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux", NULL
+	};
+	struct hda_input_mux *imux = &spec->private_imux[0];
+	int i, err, idx = 0;
+
+	for (i = 0; i < AUTO_PIN_LAST; i++) {
+		if (!cfg->input_pins[i])
+			continue;
+
+		switch (cfg->input_pins[i]) {
+		case 0x2b: /* Mic */
+			idx = 0;
+			break;
+
+		case 0x2a: /* Line In */
+			idx = 1;
+			break;
+
+		case 0x29: /* Front Mic */
+			idx = 2;
+			break;
+		}
+		err = via_new_analog_input(spec, labels[i], idx, 0x21);
+		if (err < 0)
+			return err;
+		imux->items[imux->num_items].label = labels[i];
+		imux->items[imux->num_items].index = idx;
+		imux->num_items++;
+	}
+	/* build volume/mute control of loopback */
+	err = via_new_analog_input(spec, "Stereo Mixer", 5, 0x21);
+	if (err < 0)
+		return err;
+
+	/* for internal loopback recording select */
+	imux->items[imux->num_items].label = "Stereo Mixer";
+	imux->items[imux->num_items].index = 5;
+	imux->num_items++;
+
+	/* for digital mic select */
+	imux->items[imux->num_items].label = "Digital Mic";
+	imux->items[imux->num_items].index = 6;
+	imux->num_items++;
+
+	return 0;
+}
+
+static int vt1812_parse_auto_config(struct hda_codec *codec)
+{
+	struct via_spec *spec = codec->spec;
+	int err;
+
+
+	err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL);
+	if (err < 0)
+		return err;
+	fill_dig_outs(codec);
+	err = vt1812_auto_fill_dac_nids(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	if (!spec->autocfg.line_outs && !spec->autocfg.hp_outs)
+		return 0; /* can't find valid BIOS pin config */
+
+	err = vt1812_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+	err = vt1812_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]);
+	if (err < 0)
+		return err;
+	err = vt1812_auto_create_analog_input_ctls(spec, &spec->autocfg);
+	if (err < 0)
+		return err;
+
+	spec->multiout.max_channels = spec->multiout.num_dacs * 2;
+
+	fill_dig_outs(codec);
+
+	if (spec->kctls.list)
+		spec->mixers[spec->num_mixers++] = spec->kctls.list;
+
+	spec->input_mux = &spec->private_imux[0];
+
+	if (spec->hp_mux)
+		spec->mixers[spec->num_mixers++] = via_hp_mixer;
+
+	return 1;
+}
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+static struct hda_amp_list vt1812_loopbacks[] = {
+	{ 0x21, HDA_INPUT, 0 },
+	{ 0x21, HDA_INPUT, 1 },
+	{ 0x21, HDA_INPUT, 2 },
+	{ } /* end */
+};
+#endif
+
+
+/* patch for vt1812 */
+static int patch_vt1812(struct hda_codec *codec)
+{
+	struct via_spec *spec;
+	int err;
+
+	/* create a codec specific record */
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (spec == NULL)
+		return -ENOMEM;
+
+	codec->spec = spec;
+
+	/* automatic parse from the BIOS config */
+	err = vt1812_parse_auto_config(codec);
+	if (err < 0) {
+		via_free(codec);
+		return err;
+	} else if (!err) {
+		printk(KERN_INFO "hda_codec: Cannot set up configuration "
+		       "from BIOS.  Using genenic mode...\n");
+	}
+
+
+	spec->init_verbs[spec->num_iverbs++]  = vt1812_volume_init_verbs;
+	spec->init_verbs[spec->num_iverbs++] = vt1812_uniwill_init_verbs;
+
+	spec->stream_name_analog = "VT1812 Analog";
+	spec->stream_analog_playback = &vt1812_pcm_analog_playback;
+	spec->stream_analog_capture = &vt1812_pcm_analog_capture;
+
+	spec->stream_name_digital = "VT1812 Digital";
+	spec->stream_digital_playback = &vt1812_pcm_digital_playback;
+
+
+	if (!spec->adc_nids && spec->input_mux) {
+		spec->adc_nids = vt1812_adc_nids;
+		spec->num_adc_nids = ARRAY_SIZE(vt1812_adc_nids);
+		get_mux_nids(codec);
+		override_mic_boost(codec, 0x2b, 0, 3, 40);
+		override_mic_boost(codec, 0x29, 0, 3, 40);
+		spec->mixers[spec->num_mixers] = vt1812_capture_mixer;
+		spec->num_mixers++;
+	}
+
+	codec->patch_ops = via_patch_ops;
+
+	codec->patch_ops.init = via_auto_init;
+	codec->patch_ops.unsol_event = via_unsol_event;
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+	spec->loopback.amplist = vt1812_loopbacks;
+#endif
 
 	return 0;
 }
@@ -3318,6 +6214,23 @@
 	  .patch = patch_vt1702},
 	{ .id = 0x11067398, .name = "VT1702",
 	  .patch = patch_vt1702},
+	{ .id = 0x11060428, .name = "VT1718S",
+	  .patch = patch_vt1718S},
+	{ .id = 0x11064428, .name = "VT1718S",
+	  .patch = patch_vt1718S},
+	{ .id = 0x11060441, .name = "VT2020",
+	  .patch = patch_vt1718S},
+	{ .id = 0x11064441, .name = "VT1828S",
+	  .patch = patch_vt1718S},
+	{ .id = 0x11060433, .name = "VT1716S",
+	  .patch = patch_vt1716S},
+	{ .id = 0x1106a721, .name = "VT1716S",
+	  .patch = patch_vt1716S},
+	{ .id = 0x11060438, .name = "VT2002P", .patch = patch_vt2002P},
+	{ .id = 0x11064438, .name = "VT2002P", .patch = patch_vt2002P},
+	{ .id = 0x11060448, .name = "VT1812", .patch = patch_vt1812},
+	{ .id = 0x11060440, .name = "VT1818S",
+	  .patch = patch_vt1708S},
 	{} /* terminator */
 };
 
diff --git a/sound/pci/ice1712/Makefile b/sound/pci/ice1712/Makefile
index 536eae2..f7ce33f 100644
--- a/sound/pci/ice1712/Makefile
+++ b/sound/pci/ice1712/Makefile
@@ -5,7 +5,7 @@
 
 snd-ice17xx-ak4xxx-objs := ak4xxx.o
 snd-ice1712-objs := ice1712.o delta.o hoontech.o ews.o
-snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o
+snd-ice1724-objs := ice1724.o amp.o revo.o aureon.o vt1720_mobo.o pontis.o prodigy192.o prodigy_hifi.o juli.o phase.o wtm.o se.o maya44.o quartet.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_ICE1712) += snd-ice1712.o snd-ice17xx-ak4xxx.o
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index d74033a..c7cff6f 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -298,6 +298,16 @@
 	inb(ICEREG(ice, DATA)); /* dummy read for pci-posting */
 }
 
+static unsigned int snd_ice1712_get_gpio_dir(struct snd_ice1712 *ice)
+{
+	return snd_ice1712_read(ice, ICE1712_IREG_GPIO_DIRECTION);
+}
+
+static unsigned int snd_ice1712_get_gpio_mask(struct snd_ice1712 *ice)
+{
+	return snd_ice1712_read(ice, ICE1712_IREG_GPIO_WRITE_MASK);
+}
+
 static void snd_ice1712_set_gpio_mask(struct snd_ice1712 *ice, unsigned int data)
 {
 	snd_ice1712_write(ice, ICE1712_IREG_GPIO_WRITE_MASK, data);
@@ -2557,7 +2567,9 @@
 	mutex_init(&ice->i2c_mutex);
 	mutex_init(&ice->open_mutex);
 	ice->gpio.set_mask = snd_ice1712_set_gpio_mask;
+	ice->gpio.get_mask = snd_ice1712_get_gpio_mask;
 	ice->gpio.set_dir = snd_ice1712_set_gpio_dir;
+	ice->gpio.get_dir = snd_ice1712_get_gpio_dir;
 	ice->gpio.set_data = snd_ice1712_set_gpio_data;
 	ice->gpio.get_data = snd_ice1712_get_gpio_data;
 
diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h
index d063149..0da778a 100644
--- a/sound/pci/ice1712/ice1712.h
+++ b/sound/pci/ice1712/ice1712.h
@@ -359,7 +359,9 @@
 		unsigned int saved[2];		/* for ewx_i2c */
 		/* operators */
 		void (*set_mask)(struct snd_ice1712 *ice, unsigned int data);
+		unsigned int (*get_mask)(struct snd_ice1712 *ice);
 		void (*set_dir)(struct snd_ice1712 *ice, unsigned int data);
+		unsigned int (*get_dir)(struct snd_ice1712 *ice);
 		void (*set_data)(struct snd_ice1712 *ice, unsigned int data);
 		unsigned int (*get_data)(struct snd_ice1712 *ice);
 		/* misc operators - move to another place? */
@@ -377,8 +379,11 @@
 	unsigned int (*get_rate)(struct snd_ice1712 *ice);
 	void (*set_rate)(struct snd_ice1712 *ice, unsigned int rate);
 	unsigned char (*set_mclk)(struct snd_ice1712 *ice, unsigned int rate);
-	void (*set_spdif_clock)(struct snd_ice1712 *ice);
-
+	int (*set_spdif_clock)(struct snd_ice1712 *ice, int type);
+	int (*get_spdif_master_type)(struct snd_ice1712 *ice);
+	char **ext_clock_names;
+	int ext_clock_count;
+	void (*pro_open)(struct snd_ice1712 *, struct snd_pcm_substream *);
 #ifdef CONFIG_PM
 	int (*pm_suspend)(struct snd_ice1712 *);
 	int (*pm_resume)(struct snd_ice1712 *);
@@ -399,6 +404,11 @@
 	ice->gpio.set_dir(ice, bits);
 }
 
+static inline unsigned int snd_ice1712_gpio_get_dir(struct snd_ice1712 *ice)
+{
+	return ice->gpio.get_dir(ice);
+}
+
 static inline void snd_ice1712_gpio_set_mask(struct snd_ice1712 *ice, unsigned int bits)
 {
 	ice->gpio.set_mask(ice, bits);
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index 10fc92c..ae29073 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -53,6 +53,7 @@
 #include "phase.h"
 #include "wtm.h"
 #include "se.h"
+#include "quartet.h"
 
 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>");
 MODULE_DESCRIPTION("VIA ICEnsemble ICE1724/1720 (Envy24HT/PT)");
@@ -70,6 +71,7 @@
 	       PHASE_DEVICE_DESC
 	       WTM_DEVICE_DESC
 	       SE_DEVICE_DESC
+	       QTET_DEVICE_DESC
 		"{VIA,VT1720},"
 		"{VIA,VT1724},"
 		"{ICEnsemble,Generic ICE1724},"
@@ -104,6 +106,8 @@
 static int PRO_RATE_RESET = 1;
 static unsigned int PRO_RATE_DEFAULT = 44100;
 
+static char *ext_clock_names[1] = { "IEC958 In" };
+
 /*
  *  Basic I/O
  */
@@ -118,9 +122,12 @@
 	return (inb(ICEMT1724(ice, RATE)) & VT1724_SPDIF_MASTER) ? 1 : 0;
 }
 
+/*
+ * locking rate makes sense only for internal clock mode
+ */
 static inline int is_pro_rate_locked(struct snd_ice1712 *ice)
 {
-	return ice->is_spdif_master(ice) || PRO_RATE_LOCKED;
+	return (!ice->is_spdif_master(ice)) && PRO_RATE_LOCKED;
 }
 
 /*
@@ -196,6 +203,12 @@
 	inw(ICEREG1724(ice, GPIO_DIRECTION)); /* dummy read for pci-posting */
 }
 
+/* get gpio direction 0 = read, 1 = write */
+static unsigned int snd_vt1724_get_gpio_dir(struct snd_ice1712 *ice)
+{
+	return inl(ICEREG1724(ice, GPIO_DIRECTION));
+}
+
 /* set the gpio mask (0 = writable) */
 static void snd_vt1724_set_gpio_mask(struct snd_ice1712 *ice, unsigned int data)
 {
@@ -205,6 +218,17 @@
 	inw(ICEREG1724(ice, GPIO_WRITE_MASK)); /* dummy read for pci-posting */
 }
 
+static unsigned int snd_vt1724_get_gpio_mask(struct snd_ice1712 *ice)
+{
+	unsigned int mask;
+	if (!ice->vt1720)
+		mask = (unsigned int)inb(ICEREG1724(ice, GPIO_WRITE_MASK_22));
+	else
+		mask = 0;
+	mask = (mask << 16) | inw(ICEREG1724(ice, GPIO_WRITE_MASK));
+	return mask;
+}
+
 static void snd_vt1724_set_gpio_data(struct snd_ice1712 *ice, unsigned int data)
 {
 	outw(data, ICEREG1724(ice, GPIO_DATA));
@@ -651,16 +675,22 @@
 		return ((rate == ice->cur_rate) && !force) ? 0 : -EBUSY;
 	}
 	if (!force && is_pro_rate_locked(ice)) {
+		/* comparing required and current rate - makes sense for
+		 * internal clock only */
 		spin_unlock_irqrestore(&ice->reg_lock, flags);
 		return (rate == ice->cur_rate) ? 0 : -EBUSY;
 	}
 
-	old_rate = ice->get_rate(ice);
-	if (force || (old_rate != rate))
-		ice->set_rate(ice, rate);
-	else if (rate == ice->cur_rate) {
-		spin_unlock_irqrestore(&ice->reg_lock, flags);
-		return 0;
+	if (force || !ice->is_spdif_master(ice)) {
+		/* force means the rate was switched by ucontrol, otherwise
+		 * setting clock rate for internal clock mode */
+		old_rate = ice->get_rate(ice);
+		if (force || (old_rate != rate))
+			ice->set_rate(ice, rate);
+		else if (rate == ice->cur_rate) {
+			spin_unlock_irqrestore(&ice->reg_lock, flags);
+			return 0;
+		}
 	}
 
 	ice->cur_rate = rate;
@@ -1016,6 +1046,8 @@
 				   VT1724_BUFFER_ALIGN);
 	snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
 				   VT1724_BUFFER_ALIGN);
+	if (ice->pro_open)
+		ice->pro_open(ice, substream);
 	return 0;
 }
 
@@ -1034,6 +1066,8 @@
 				   VT1724_BUFFER_ALIGN);
 	snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
 				   VT1724_BUFFER_ALIGN);
+	if (ice->pro_open)
+		ice->pro_open(ice, substream);
 	return 0;
 }
 
@@ -1787,15 +1821,21 @@
 					      struct snd_ctl_elem_info *uinfo)
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
-
+	int hw_rates_count = ice->hw_rates->count;
 	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
 	uinfo->count = 1;
-	uinfo->value.enumerated.items = ice->hw_rates->count + 1;
+
+	uinfo->value.enumerated.items = hw_rates_count + ice->ext_clock_count;
+	/* upper limit - keep at top */
 	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
 		uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1;
-	if (uinfo->value.enumerated.item == uinfo->value.enumerated.items - 1)
-		strcpy(uinfo->value.enumerated.name, "IEC958 Input");
+	if (uinfo->value.enumerated.item >= hw_rates_count)
+		/* ext_clock items */
+		strcpy(uinfo->value.enumerated.name,
+				ice->ext_clock_names[
+				uinfo->value.enumerated.item - hw_rates_count]);
 	else
+		/* int clock items */
 		sprintf(uinfo->value.enumerated.name, "%d",
 			ice->hw_rates->list[uinfo->value.enumerated.item]);
 	return 0;
@@ -1809,7 +1849,8 @@
 
 	spin_lock_irq(&ice->reg_lock);
 	if (ice->is_spdif_master(ice)) {
-		ucontrol->value.enumerated.item[0] = ice->hw_rates->count;
+		ucontrol->value.enumerated.item[0] = ice->hw_rates->count +
+			ice->get_spdif_master_type(ice);
 	} else {
 		rate = ice->get_rate(ice);
 		ucontrol->value.enumerated.item[0] = 0;
@@ -1824,8 +1865,14 @@
 	return 0;
 }
 
+static int stdclock_get_spdif_master_type(struct snd_ice1712 *ice)
+{
+	/* standard external clock - only single type - SPDIF IN */
+	return 0;
+}
+
 /* setting clock to external - SPDIF */
-static void stdclock_set_spdif_clock(struct snd_ice1712 *ice)
+static int stdclock_set_spdif_clock(struct snd_ice1712 *ice, int type)
 {
 	unsigned char oval;
 	unsigned char i2s_oval;
@@ -1834,27 +1881,30 @@
 	/* setting 256fs */
 	i2s_oval = inb(ICEMT1724(ice, I2S_FORMAT));
 	outb(i2s_oval & ~VT1724_MT_I2S_MCLK_128X, ICEMT1724(ice, I2S_FORMAT));
+	return 0;
 }
 
+
 static int snd_vt1724_pro_internal_clock_put(struct snd_kcontrol *kcontrol,
 					     struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
 	unsigned int old_rate, new_rate;
 	unsigned int item = ucontrol->value.enumerated.item[0];
-	unsigned int spdif = ice->hw_rates->count;
+	unsigned int first_ext_clock = ice->hw_rates->count;
 
-	if (item > spdif)
+	if (item >  first_ext_clock + ice->ext_clock_count - 1)
 		return -EINVAL;
 
+	/* if rate = 0 => external clock */
 	spin_lock_irq(&ice->reg_lock);
 	if (ice->is_spdif_master(ice))
 		old_rate = 0;
 	else
 		old_rate = ice->get_rate(ice);
-	if (item == spdif) {
-		/* switching to external clock via SPDIF */
-		ice->set_spdif_clock(ice);
+	if (item >= first_ext_clock) {
+		/* switching to external clock */
+		ice->set_spdif_clock(ice, item - first_ext_clock);
 		new_rate = 0;
 	} else {
 		/* internal on-card clock */
@@ -1866,7 +1916,7 @@
 	}
 	spin_unlock_irq(&ice->reg_lock);
 
-	/* the first reset to the SPDIF master mode? */
+	/* the first switch to the ext. clock mode? */
 	if (old_rate != new_rate && !new_rate) {
 		/* notify akm chips as well */
 		unsigned int i;
@@ -2136,6 +2186,7 @@
 	snd_vt1724_phase_cards,
 	snd_vt1724_wtm_cards,
 	snd_vt1724_se_cards,
+	snd_vt1724_qtet_cards,
 	NULL,
 };
 
@@ -2434,7 +2485,9 @@
 	mutex_init(&ice->open_mutex);
 	mutex_init(&ice->i2c_mutex);
 	ice->gpio.set_mask = snd_vt1724_set_gpio_mask;
+	ice->gpio.get_mask = snd_vt1724_get_gpio_mask;
 	ice->gpio.set_dir = snd_vt1724_set_gpio_dir;
+	ice->gpio.get_dir = snd_vt1724_get_gpio_dir;
 	ice->gpio.set_data = snd_vt1724_set_gpio_data;
 	ice->gpio.get_data = snd_vt1724_get_gpio_data;
 	ice->card = card;
@@ -2522,6 +2575,9 @@
 		return err;
 	}
 
+	/* field init before calling chip_init */
+	ice->ext_clock_count = 0;
+
 	for (tbl = card_tables; *tbl; tbl++) {
 		for (c = *tbl; c->subvendor; c++) {
 			if (c->subvendor == ice->eeprom.subvendor) {
@@ -2560,6 +2616,13 @@
 		ice->set_mclk = stdclock_set_mclk;
 	if (!ice->set_spdif_clock)
 		ice->set_spdif_clock = stdclock_set_spdif_clock;
+	if (!ice->get_spdif_master_type)
+		ice->get_spdif_master_type = stdclock_get_spdif_master_type;
+	if (!ice->ext_clock_names)
+		ice->ext_clock_names = ext_clock_names;
+	if (!ice->ext_clock_count)
+		ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
+
 	if (!ice->hw_rates)
 		set_std_hw_rates(ice);
 
@@ -2719,7 +2782,7 @@
 
 	if (ice->pm_saved_is_spdif_master) {
 		/* switching to external clock via SPDIF */
-		ice->set_spdif_clock(ice);
+		ice->set_spdif_clock(ice, 0);
 	} else {
 		/* internal on-card clock */
 		snd_vt1724_set_pro_rate(ice, ice->pro_rate_default, 1);
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index fd948bf..0c9413d 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -412,25 +412,6 @@
 	},
 };
 
-
-static void ak4358_proc_regs_read(struct snd_info_entry *entry,
-		struct snd_info_buffer *buffer)
-{
-	struct snd_ice1712 *ice = (struct snd_ice1712 *)entry->private_data;
-	int reg, val;
-	for (reg = 0; reg <= 0xf; reg++) {
-		val =  snd_akm4xxx_get(ice->akm, 0, reg);
-		snd_iprintf(buffer, "0x%02x = 0x%02x\n", reg, val);
-	}
-}
-
-static void ak4358_proc_init(struct snd_ice1712 *ice)
-{
-	struct snd_info_entry *entry;
-	if (!snd_card_proc_new(ice->card, "ak4358_codec", &entry))
-		snd_info_set_text_ops(entry, ice, ak4358_proc_regs_read);
-}
-
 static char *slave_vols[] __devinitdata = {
 	PCM_VOLUME,
 	MONITOR_AN_IN_VOLUME,
@@ -496,14 +477,37 @@
 	/* only capture SPDIF over AK4114 */
 	err = snd_ak4114_build(spec->ak4114, NULL,
 			ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
-
-	ak4358_proc_init(ice);
 	if (err < 0)
 		return err;
 	return 0;
 }
 
 /*
+ * suspend/resume
+ * */
+
+#ifdef CONFIG_PM
+static int juli_resume(struct snd_ice1712 *ice)
+{
+	struct snd_akm4xxx *ak = ice->akm;
+	struct juli_spec *spec = ice->spec;
+	/* akm4358 un-reset, un-mute */
+	snd_akm4xxx_reset(ak, 0);
+	/* reinit ak4114 */
+	snd_ak4114_reinit(spec->ak4114);
+	return 0;
+}
+
+static int juli_suspend(struct snd_ice1712 *ice)
+{
+	struct snd_akm4xxx *ak = ice->akm;
+	/* akm4358 reset and soft-mute */
+	snd_akm4xxx_reset(ak, 1);
+	return 0;
+}
+#endif
+
+/*
  * initialize the chip
  */
 
@@ -550,13 +554,14 @@
 }
 
 /* setting clock to external - SPDIF */
-static void juli_set_spdif_clock(struct snd_ice1712 *ice)
+static int juli_set_spdif_clock(struct snd_ice1712 *ice, int type)
 {
 	unsigned int old;
 	old = ice->gpio.get_data(ice);
 	/* external clock (= 0), multiply 1x, 48kHz */
 	ice->gpio.set_data(ice, (old & ~GPIO_RATE_MASK) | GPIO_MULTI_1X |
 			GPIO_FREQ_48KHZ);
+	return 0;
 }
 
 /* Called when ak4114 detects change in the input SPDIF stream */
@@ -646,6 +651,13 @@
 	ice->set_spdif_clock = juli_set_spdif_clock;
 
 	ice->spdif.ops.open = juli_spdif_in_open;
+
+#ifdef CONFIG_PM
+	ice->pm_resume = juli_resume;
+	ice->pm_suspend = juli_suspend;
+	ice->pm_suspend_enabled = 1;
+#endif
+
 	return 0;
 }
 
diff --git a/sound/pci/ice1712/quartet.c b/sound/pci/ice1712/quartet.c
new file mode 100644
index 0000000..1948632
--- /dev/null
+++ b/sound/pci/ice1712/quartet.c
@@ -0,0 +1,1130 @@
+/*
+ *   ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ *   Lowlevel functions for Infrasonic Quartet
+ *
+ *	Copyright (c) 2009 Pavel Hofman <pavel.hofman@ivitera.com>
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+#include <sound/info.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include <sound/ak4113.h>
+#include "quartet.h"
+
+struct qtet_spec {
+	struct ak4113 *ak4113;
+	unsigned int scr;	/* system control register */
+	unsigned int mcr;	/* monitoring control register */
+	unsigned int cpld;	/* cpld register */
+};
+
+struct qtet_kcontrol_private {
+	unsigned int bit;
+	void (*set_register)(struct snd_ice1712 *ice, unsigned int val);
+	unsigned int (*get_register)(struct snd_ice1712 *ice);
+	unsigned char *texts[2];
+};
+
+enum {
+	IN12_SEL = 0,
+	IN34_SEL,
+	AIN34_SEL,
+	COAX_OUT,
+	IN12_MON12,
+	IN12_MON34,
+	IN34_MON12,
+	IN34_MON34,
+	OUT12_MON34,
+	OUT34_MON12,
+};
+
+static char *ext_clock_names[3] = {"IEC958 In", "Word Clock 1xFS",
+	"Word Clock 256xFS"};
+
+/* chip address on I2C bus */
+#define AK4113_ADDR		0x26	/* S/PDIF receiver */
+
+/* chip address on SPI bus */
+#define AK4620_ADDR		0x02	/* ADC/DAC */
+
+
+/*
+ * GPIO pins
+ */
+
+/* GPIO0 - O - DATA0, def. 0 */
+#define GPIO_D0			(1<<0)
+/* GPIO1 - I/O - DATA1, Jack Detect Input0 (0:present, 1:missing), def. 1 */
+#define GPIO_D1_JACKDTC0	(1<<1)
+/* GPIO2 - I/O - DATA2, Jack Detect Input1 (0:present, 1:missing), def. 1 */
+#define GPIO_D2_JACKDTC1	(1<<2)
+/* GPIO3 - I/O - DATA3, def. 1 */
+#define GPIO_D3			(1<<3)
+/* GPIO4 - I/O - DATA4, SPI CDTO, def. 1 */
+#define GPIO_D4_SPI_CDTO	(1<<4)
+/* GPIO5 - I/O - DATA5, SPI CCLK, def. 1 */
+#define GPIO_D5_SPI_CCLK	(1<<5)
+/* GPIO6 - I/O - DATA6, Cable Detect Input (0:detected, 1:not detected */
+#define GPIO_D6_CD		(1<<6)
+/* GPIO7 - I/O - DATA7, Device Detect Input (0:detected, 1:not detected */
+#define GPIO_D7_DD		(1<<7)
+/* GPIO8 - O - CPLD Chip Select, def. 1 */
+#define GPIO_CPLD_CSN		(1<<8)
+/* GPIO9 - O - CPLD register read/write (0:write, 1:read), def. 0 */
+#define GPIO_CPLD_RW		(1<<9)
+/* GPIO10 - O - SPI Chip Select for CODEC#0, def. 1 */
+#define GPIO_SPI_CSN0		(1<<10)
+/* GPIO11 - O - SPI Chip Select for CODEC#1, def. 1 */
+#define GPIO_SPI_CSN1		(1<<11)
+/* GPIO12 - O - Ex. Register Output Enable (0:enable, 1:disable), def. 1,
+ * init 0 */
+#define GPIO_EX_GPIOE		(1<<12)
+/* GPIO13 - O - Ex. Register0 Chip Select for System Control Register,
+ * def. 1 */
+#define GPIO_SCR		(1<<13)
+/* GPIO14 - O - Ex. Register1 Chip Select for Monitor Control Register,
+ * def. 1 */
+#define GPIO_MCR		(1<<14)
+
+#define GPIO_SPI_ALL		(GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK |\
+		GPIO_SPI_CSN0 | GPIO_SPI_CSN1)
+
+#define GPIO_DATA_MASK		(GPIO_D0 | GPIO_D1_JACKDTC0 | \
+		GPIO_D2_JACKDTC1 | GPIO_D3 | \
+		GPIO_D4_SPI_CDTO | GPIO_D5_SPI_CCLK | \
+		GPIO_D6_CD | GPIO_D7_DD)
+
+/* System Control Register GPIO_SCR data bits */
+/* Mic/Line select relay (0:line, 1:mic) */
+#define SCR_RELAY		GPIO_D0
+/* Phantom power drive control (0:5V, 1:48V) */
+#define SCR_PHP_V		GPIO_D1_JACKDTC0
+/* H/W mute control (0:Normal, 1:Mute) */
+#define SCR_MUTE		GPIO_D2_JACKDTC1
+/* Phantom power control (0:Phantom on, 1:off) */
+#define SCR_PHP			GPIO_D3
+/* Analog input 1/2 Source Select */
+#define SCR_AIN12_SEL0		GPIO_D4_SPI_CDTO
+#define SCR_AIN12_SEL1		GPIO_D5_SPI_CCLK
+/* Analog input 3/4 Source Select (0:line, 1:hi-z) */
+#define SCR_AIN34_SEL		GPIO_D6_CD
+/* Codec Power Down (0:power down, 1:normal) */
+#define SCR_CODEC_PDN		GPIO_D7_DD
+
+#define SCR_AIN12_LINE		(0)
+#define SCR_AIN12_MIC		(SCR_AIN12_SEL0)
+#define SCR_AIN12_LOWCUT	(SCR_AIN12_SEL1 | SCR_AIN12_SEL0)
+
+/* Monitor Control Register GPIO_MCR data bits */
+/* Input 1/2 to Monitor 1/2 (0:off, 1:on) */
+#define MCR_IN12_MON12		GPIO_D0
+/* Input 1/2 to Monitor 3/4 (0:off, 1:on) */
+#define MCR_IN12_MON34		GPIO_D1_JACKDTC0
+/* Input 3/4 to Monitor 1/2 (0:off, 1:on) */
+#define MCR_IN34_MON12		GPIO_D2_JACKDTC1
+/* Input 3/4 to Monitor 3/4 (0:off, 1:on) */
+#define MCR_IN34_MON34		GPIO_D3
+/* Output to Monitor 1/2 (0:off, 1:on) */
+#define MCR_OUT34_MON12		GPIO_D4_SPI_CDTO
+/* Output to Monitor 3/4 (0:off, 1:on) */
+#define MCR_OUT12_MON34		GPIO_D5_SPI_CCLK
+
+/* CPLD Register DATA bits */
+/* Clock Rate Select */
+#define CPLD_CKS0		GPIO_D0
+#define CPLD_CKS1		GPIO_D1_JACKDTC0
+#define CPLD_CKS2		GPIO_D2_JACKDTC1
+/* Sync Source Select (0:Internal, 1:External) */
+#define CPLD_SYNC_SEL		GPIO_D3
+/* Word Clock FS Select (0:FS, 1:256FS) */
+#define CPLD_WORD_SEL		GPIO_D4_SPI_CDTO
+/* Coaxial Output Source (IS-Link) (0:SPDIF, 1:I2S) */
+#define CPLD_COAX_OUT		GPIO_D5_SPI_CCLK
+/* Input 1/2 Source Select (0:Analog12, 1:An34) */
+#define CPLD_IN12_SEL		GPIO_D6_CD
+/* Input 3/4 Source Select (0:Analog34, 1:Digital In) */
+#define CPLD_IN34_SEL		GPIO_D7_DD
+
+/* internal clock (CPLD_SYNC_SEL = 0) options */
+#define CPLD_CKS_44100HZ	(0)
+#define CPLD_CKS_48000HZ	(CPLD_CKS0)
+#define CPLD_CKS_88200HZ	(CPLD_CKS1)
+#define CPLD_CKS_96000HZ	(CPLD_CKS1 | CPLD_CKS0)
+#define CPLD_CKS_176400HZ	(CPLD_CKS2)
+#define CPLD_CKS_192000HZ	(CPLD_CKS2 | CPLD_CKS0)
+
+#define CPLD_CKS_MASK		(CPLD_CKS0 | CPLD_CKS1 | CPLD_CKS2)
+
+/* external clock (CPLD_SYNC_SEL = 1) options */
+/* external clock - SPDIF */
+#define CPLD_EXT_SPDIF	(0 | CPLD_SYNC_SEL)
+/* external clock - WordClock 1xfs */
+#define CPLD_EXT_WORDCLOCK_1FS	(CPLD_CKS1 | CPLD_SYNC_SEL)
+/* external clock - WordClock 256xfs */
+#define CPLD_EXT_WORDCLOCK_256FS	(CPLD_CKS1 | CPLD_WORD_SEL |\
+		CPLD_SYNC_SEL)
+
+#define EXT_SPDIF_TYPE			0
+#define EXT_WORDCLOCK_1FS_TYPE		1
+#define EXT_WORDCLOCK_256FS_TYPE	2
+
+#define AK4620_DFS0		(1<<0)
+#define AK4620_DFS1		(1<<1)
+#define AK4620_CKS0		(1<<2)
+#define AK4620_CKS1		(1<<3)
+/* Clock and Format Control register */
+#define AK4620_DFS_REG		0x02
+
+/* Deem and Volume Control register */
+#define AK4620_DEEMVOL_REG	0x03
+#define AK4620_SMUTE		(1<<7)
+
+/*
+ * Conversion from int value to its binary form. Used for debugging.
+ * The output buffer must be allocated prior to calling the function.
+ */
+static char *get_binary(char *buffer, int value)
+{
+	int i, j, pos;
+	pos = 0;
+	for (i = 0; i < 4; ++i) {
+		for (j = 0; j < 8; ++j) {
+			if (value & (1 << (31-(i*8 + j))))
+				buffer[pos] = '1';
+			else
+				buffer[pos] = '0';
+			pos++;
+		}
+		if (i < 3) {
+			buffer[pos] = ' ';
+			pos++;
+		}
+	}
+	buffer[pos] = '\0';
+	return buffer;
+}
+
+/*
+ * Initial setup of the conversion array GPIO <-> rate
+ */
+static unsigned int qtet_rates[] = {
+	44100, 48000, 88200,
+	96000, 176400, 192000,
+};
+
+static unsigned int cks_vals[] = {
+	CPLD_CKS_44100HZ, CPLD_CKS_48000HZ, CPLD_CKS_88200HZ,
+	CPLD_CKS_96000HZ, CPLD_CKS_176400HZ, CPLD_CKS_192000HZ,
+};
+
+static struct snd_pcm_hw_constraint_list qtet_rates_info = {
+	.count = ARRAY_SIZE(qtet_rates),
+	.list = qtet_rates,
+	.mask = 0,
+};
+
+static void qtet_ak4113_write(void *private_data, unsigned char reg,
+		unsigned char val)
+{
+	snd_vt1724_write_i2c((struct snd_ice1712 *)private_data, AK4113_ADDR,
+			reg, val);
+}
+
+static unsigned char qtet_ak4113_read(void *private_data, unsigned char reg)
+{
+	return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data,
+			AK4113_ADDR, reg);
+}
+
+
+/*
+ * AK4620 section
+ */
+
+/*
+ * Write data to addr register of ak4620
+ */
+static void qtet_akm_write(struct snd_akm4xxx *ak, int chip,
+		unsigned char addr, unsigned char data)
+{
+	unsigned int tmp, orig_dir;
+	int idx;
+	unsigned int addrdata;
+	struct snd_ice1712 *ice = ak->private_data[0];
+
+	if (snd_BUG_ON(chip < 0 || chip >= 4))
+		return;
+	/*printk(KERN_DEBUG "Writing to AK4620: chip=%d, addr=0x%x,
+	  data=0x%x\n", chip, addr, data);*/
+	orig_dir = ice->gpio.get_dir(ice);
+	ice->gpio.set_dir(ice, orig_dir | GPIO_SPI_ALL);
+	/* set mask - only SPI bits */
+	ice->gpio.set_mask(ice, ~GPIO_SPI_ALL);
+
+	tmp = ice->gpio.get_data(ice);
+	/* high all */
+	tmp |= GPIO_SPI_ALL;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+	/* drop chip select */
+	if (chip)
+		/* CODEC 1 */
+		tmp &= ~GPIO_SPI_CSN1;
+	else
+		tmp &= ~GPIO_SPI_CSN0;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+
+	/* build I2C address + data byte */
+	addrdata = (AK4620_ADDR << 6) | 0x20 | (addr & 0x1f);
+	addrdata = (addrdata << 8) | data;
+	for (idx = 15; idx >= 0; idx--) {
+		/* drop clock */
+		tmp &= ~GPIO_D5_SPI_CCLK;
+		ice->gpio.set_data(ice, tmp);
+		udelay(100);
+		/* set data */
+		if (addrdata & (1 << idx))
+			tmp |= GPIO_D4_SPI_CDTO;
+		else
+			tmp &= ~GPIO_D4_SPI_CDTO;
+		ice->gpio.set_data(ice, tmp);
+		udelay(100);
+		/* raise clock */
+		tmp |= GPIO_D5_SPI_CCLK;
+		ice->gpio.set_data(ice, tmp);
+		udelay(100);
+	}
+	/* all back to 1 */
+	tmp |= GPIO_SPI_ALL;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+
+	/* return all gpios to non-writable */
+	ice->gpio.set_mask(ice, 0xffffff);
+	/* restore GPIOs direction */
+	ice->gpio.set_dir(ice, orig_dir);
+}
+
+static void qtet_akm_set_regs(struct snd_akm4xxx *ak, unsigned char addr,
+		unsigned char mask, unsigned char value)
+{
+	unsigned char tmp;
+	int chip;
+	for (chip = 0; chip < ak->num_chips; chip++) {
+		tmp = snd_akm4xxx_get(ak, chip, addr);
+		/* clear the bits */
+		tmp &= ~mask;
+		/* set the new bits */
+		tmp |= value;
+		snd_akm4xxx_write(ak, chip, addr, tmp);
+	}
+}
+
+/*
+ * change the rate of AK4620
+ */
+static void qtet_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
+{
+	unsigned char ak4620_dfs;
+
+	if (rate == 0)  /* no hint - S/PDIF input is master or the new spdif
+			   input rate undetected, simply return */
+		return;
+
+	/* adjust DFS on codecs - see datasheet */
+	if (rate > 108000)
+		ak4620_dfs = AK4620_DFS1 | AK4620_CKS1;
+	else if (rate > 54000)
+		ak4620_dfs = AK4620_DFS0 | AK4620_CKS0;
+	else
+		ak4620_dfs = 0;
+
+	/* set new value */
+	qtet_akm_set_regs(ak, AK4620_DFS_REG, AK4620_DFS0 | AK4620_DFS1 |
+			AK4620_CKS0 | AK4620_CKS1, ak4620_dfs);
+}
+
+#define AK_CONTROL(xname, xch)	{ .name = xname, .num_channels = xch }
+
+#define PCM_12_PLAYBACK_VOLUME	"PCM 1/2 Playback Volume"
+#define PCM_34_PLAYBACK_VOLUME	"PCM 3/4 Playback Volume"
+#define PCM_12_CAPTURE_VOLUME	"PCM 1/2 Capture Volume"
+#define PCM_34_CAPTURE_VOLUME	"PCM 3/4 Capture Volume"
+
+static const struct snd_akm4xxx_dac_channel qtet_dac[] = {
+	AK_CONTROL(PCM_12_PLAYBACK_VOLUME, 2),
+	AK_CONTROL(PCM_34_PLAYBACK_VOLUME, 2),
+};
+
+static const struct snd_akm4xxx_adc_channel qtet_adc[] = {
+	AK_CONTROL(PCM_12_CAPTURE_VOLUME, 2),
+	AK_CONTROL(PCM_34_CAPTURE_VOLUME, 2),
+};
+
+static struct snd_akm4xxx akm_qtet_dac __devinitdata = {
+	.type = SND_AK4620,
+	.num_dacs = 4,	/* DAC1 - Output 12
+	*/
+	.num_adcs = 4,	/* ADC1 - Input 12
+	*/
+	.ops = {
+		.write = qtet_akm_write,
+		.set_rate_val = qtet_akm_set_rate_val,
+	},
+	.dac_info = qtet_dac,
+	.adc_info = qtet_adc,
+};
+
+/* Communication routines with the CPLD */
+
+
+/* Writes data to external register reg, both reg and data are
+ * GPIO representations */
+static void reg_write(struct snd_ice1712 *ice, unsigned int reg,
+		unsigned int data)
+{
+	unsigned int tmp;
+
+	mutex_lock(&ice->gpio_mutex);
+	/* set direction of used GPIOs*/
+	/* all outputs */
+	tmp = 0x00ffff;
+	ice->gpio.set_dir(ice, tmp);
+	/* mask - writable bits */
+	ice->gpio.set_mask(ice, ~(tmp));
+	/* write the data */
+	tmp = ice->gpio.get_data(ice);
+	tmp &= ~GPIO_DATA_MASK;
+	tmp |= data;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+	/* drop output enable */
+	tmp &=  ~GPIO_EX_GPIOE;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+	/* drop the register gpio */
+	tmp &= ~reg;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+	/* raise the register GPIO */
+	tmp |= reg;
+	ice->gpio.set_data(ice, tmp);
+	udelay(100);
+
+	/* raise all data gpios */
+	tmp |= GPIO_DATA_MASK;
+	ice->gpio.set_data(ice, tmp);
+	/* mask - immutable bits */
+	ice->gpio.set_mask(ice, 0xffffff);
+	/* outputs only 8-15 */
+	ice->gpio.set_dir(ice, 0x00ff00);
+	mutex_unlock(&ice->gpio_mutex);
+}
+
+static unsigned int get_scr(struct snd_ice1712 *ice)
+{
+	struct qtet_spec *spec = ice->spec;
+	return spec->scr;
+}
+
+static unsigned int get_mcr(struct snd_ice1712 *ice)
+{
+	struct qtet_spec *spec = ice->spec;
+	return spec->mcr;
+}
+
+static unsigned int get_cpld(struct snd_ice1712 *ice)
+{
+	struct qtet_spec *spec = ice->spec;
+	return spec->cpld;
+}
+
+static void set_scr(struct snd_ice1712 *ice, unsigned int val)
+{
+	struct qtet_spec *spec = ice->spec;
+	reg_write(ice, GPIO_SCR, val);
+	spec->scr = val;
+}
+
+static void set_mcr(struct snd_ice1712 *ice, unsigned int val)
+{
+	struct qtet_spec *spec = ice->spec;
+	reg_write(ice, GPIO_MCR, val);
+	spec->mcr = val;
+}
+
+static void set_cpld(struct snd_ice1712 *ice, unsigned int val)
+{
+	struct qtet_spec *spec = ice->spec;
+	reg_write(ice, GPIO_CPLD_CSN, val);
+	spec->cpld = val;
+}
+#ifdef CONFIG_PROC_FS
+static void proc_regs_read(struct snd_info_entry *entry,
+		struct snd_info_buffer *buffer)
+{
+	struct snd_ice1712 *ice = entry->private_data;
+	char bin_buffer[36];
+
+	snd_iprintf(buffer, "SCR:	%s\n", get_binary(bin_buffer,
+				get_scr(ice)));
+	snd_iprintf(buffer, "MCR:	%s\n", get_binary(bin_buffer,
+				get_mcr(ice)));
+	snd_iprintf(buffer, "CPLD:	%s\n", get_binary(bin_buffer,
+				get_cpld(ice)));
+}
+
+static void proc_init(struct snd_ice1712 *ice)
+{
+	struct snd_info_entry *entry;
+	if (!snd_card_proc_new(ice->card, "quartet", &entry))
+		snd_info_set_text_ops(entry, ice, proc_regs_read);
+}
+#else /* !CONFIG_PROC_FS */
+static void proc_init(struct snd_ice1712 *ice) {}
+#endif
+
+static int qtet_mute_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int val;
+	val = get_scr(ice) & SCR_MUTE;
+	ucontrol->value.integer.value[0] = (val) ? 0 : 1;
+	return 0;
+}
+
+static int qtet_mute_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int old, new, smute;
+	old = get_scr(ice) & SCR_MUTE;
+	if (ucontrol->value.integer.value[0]) {
+		/* unmute */
+		new = 0;
+		/* un-smuting DAC */
+		smute = 0;
+	} else {
+		/* mute */
+		new = SCR_MUTE;
+		/* smuting DAC */
+		smute = AK4620_SMUTE;
+	}
+	if (old != new) {
+		struct snd_akm4xxx *ak = ice->akm;
+		set_scr(ice, (get_scr(ice) & ~SCR_MUTE) | new);
+		/* set smute */
+		qtet_akm_set_regs(ak, AK4620_DEEMVOL_REG, AK4620_SMUTE, smute);
+		return 1;
+	}
+	/* no change */
+	return 0;
+}
+
+static int qtet_ain12_enum_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[3] = {"Line In 1/2", "Mic", "Mic + Low-cut"};
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(texts);
+
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+			texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
+
+static int qtet_ain12_sw_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int val, result;
+	val = get_scr(ice) & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
+	switch (val) {
+	case SCR_AIN12_LINE:
+		result = 0;
+		break;
+	case SCR_AIN12_MIC:
+		result = 1;
+		break;
+	case SCR_AIN12_LOWCUT:
+		result = 2;
+		break;
+	default:
+		/* BUG - no other combinations allowed */
+		snd_BUG();
+		result = 0;
+	}
+	ucontrol->value.integer.value[0] = result;
+	return 0;
+}
+
+static int qtet_ain12_sw_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int old, new, tmp, masked_old;
+	old = new = get_scr(ice);
+	masked_old = old & (SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
+	tmp = ucontrol->value.integer.value[0];
+	if (tmp == 2)
+		tmp = 3;	/* binary 10 is not supported */
+	tmp <<= 4;	/* shifting to SCR_AIN12_SEL0 */
+	if (tmp != masked_old) {
+		/* change requested */
+		switch (tmp) {
+		case SCR_AIN12_LINE:
+			new = old & ~(SCR_AIN12_SEL1 | SCR_AIN12_SEL0);
+			set_scr(ice, new);
+			/* turn off relay */
+			new &= ~SCR_RELAY;
+			set_scr(ice, new);
+			break;
+		case SCR_AIN12_MIC:
+			/* turn on relay */
+			new = old | SCR_RELAY;
+			set_scr(ice, new);
+			new = (new & ~SCR_AIN12_SEL1) | SCR_AIN12_SEL0;
+			set_scr(ice, new);
+			break;
+		case SCR_AIN12_LOWCUT:
+			/* turn on relay */
+			new = old | SCR_RELAY;
+			set_scr(ice, new);
+			new |= SCR_AIN12_SEL1 | SCR_AIN12_SEL0;
+			set_scr(ice, new);
+			break;
+		default:
+			snd_BUG();
+		}
+		return 1;
+	}
+	/* no change */
+	return 0;
+}
+
+static int qtet_php_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int val;
+	/* if phantom voltage =48V, phantom on */
+	val = get_scr(ice) & SCR_PHP_V;
+	ucontrol->value.integer.value[0] = val ? 1 : 0;
+	return 0;
+}
+
+static int qtet_php_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int old, new;
+	old = new = get_scr(ice);
+	if (ucontrol->value.integer.value[0] /* phantom on requested */
+			&& (~old & SCR_PHP_V)) /* 0 = voltage 5V */ {
+		/* is off, turn on */
+		/* turn voltage on first, = 1 */
+		new = old | SCR_PHP_V;
+		set_scr(ice, new);
+		/* turn phantom on, = 0 */
+		new &= ~SCR_PHP;
+		set_scr(ice, new);
+	} else if (!ucontrol->value.integer.value[0] && (old & SCR_PHP_V)) {
+		/* phantom off requested and 1 = voltage 48V */
+		/* is on, turn off */
+		/* turn voltage off first, = 0 */
+		new = old & ~SCR_PHP_V;
+		set_scr(ice, new);
+		/* turn phantom off, = 1 */
+		new |= SCR_PHP;
+		set_scr(ice, new);
+	}
+	if (old != new)
+		return 1;
+	/* no change */
+	return 0;
+}
+
+#define PRIV_SW(xid, xbit, xreg)	[xid] = {.bit = xbit,\
+	.set_register = set_##xreg,\
+	.get_register = get_##xreg, }
+
+
+#define PRIV_ENUM2(xid, xbit, xreg, xtext1, xtext2)	[xid] = {.bit = xbit,\
+	.set_register = set_##xreg,\
+	.get_register = get_##xreg,\
+	.texts = {xtext1, xtext2} }
+
+static struct qtet_kcontrol_private qtet_privates[] = {
+	PRIV_ENUM2(IN12_SEL, CPLD_IN12_SEL, cpld, "An In 1/2", "An In 3/4"),
+	PRIV_ENUM2(IN34_SEL, CPLD_IN34_SEL, cpld, "An In 3/4", "IEC958 In"),
+	PRIV_ENUM2(AIN34_SEL, SCR_AIN34_SEL, scr, "Line In 3/4", "Hi-Z"),
+	PRIV_ENUM2(COAX_OUT, CPLD_COAX_OUT, cpld, "IEC958", "I2S"),
+	PRIV_SW(IN12_MON12, MCR_IN12_MON12, mcr),
+	PRIV_SW(IN12_MON34, MCR_IN12_MON34, mcr),
+	PRIV_SW(IN34_MON12, MCR_IN34_MON12, mcr),
+	PRIV_SW(IN34_MON34, MCR_IN34_MON34, mcr),
+	PRIV_SW(OUT12_MON34, MCR_OUT12_MON34, mcr),
+	PRIV_SW(OUT34_MON12, MCR_OUT34_MON12, mcr),
+};
+
+static int qtet_enum_info(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_info *uinfo)
+{
+	struct qtet_kcontrol_private private =
+		qtet_privates[kcontrol->private_value];
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->count = 1;
+	uinfo->value.enumerated.items = ARRAY_SIZE(private.texts);
+
+	if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+		uinfo->value.enumerated.item =
+			uinfo->value.enumerated.items - 1;
+	strcpy(uinfo->value.enumerated.name,
+			private.texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
+
+static int qtet_sw_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct qtet_kcontrol_private private =
+		qtet_privates[kcontrol->private_value];
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	ucontrol->value.integer.value[0] =
+		(private.get_register(ice) & private.bit) ? 1 : 0;
+	return 0;
+}
+
+static int qtet_sw_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct qtet_kcontrol_private private =
+		qtet_privates[kcontrol->private_value];
+	struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+	unsigned int old, new;
+	old = private.get_register(ice);
+	if (ucontrol->value.integer.value[0])
+		new = old | private.bit;
+	else
+		new = old & ~private.bit;
+	if (old != new) {
+		private.set_register(ice, new);
+		return 1;
+	}
+	/* no change */
+	return 0;
+}
+
+#define qtet_sw_info	snd_ctl_boolean_mono_info
+
+#define QTET_CONTROL(xname, xtype, xpriv)	\
+	{.iface = SNDRV_CTL_ELEM_IFACE_MIXER,\
+	.name = xname,\
+	.info = qtet_##xtype##_info,\
+	.get = qtet_sw_get,\
+	.put = qtet_sw_put,\
+	.private_value = xpriv }
+
+static struct snd_kcontrol_new qtet_controls[] __devinitdata = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.info = qtet_sw_info,
+		.get = qtet_mute_get,
+		.put = qtet_mute_put,
+		.private_value = 0
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Phantom Power",
+		.info = qtet_sw_info,
+		.get = qtet_php_get,
+		.put = qtet_php_put,
+		.private_value = 0
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog In 1/2 Capture Switch",
+		.info = qtet_ain12_enum_info,
+		.get = qtet_ain12_sw_get,
+		.put = qtet_ain12_sw_put,
+		.private_value = 0
+	},
+	QTET_CONTROL("Analog In 3/4 Capture Switch", enum, AIN34_SEL),
+	QTET_CONTROL("PCM In 1/2 Capture Switch", enum, IN12_SEL),
+	QTET_CONTROL("PCM In 3/4 Capture Switch", enum, IN34_SEL),
+	QTET_CONTROL("Coax Output Source", enum, COAX_OUT),
+	QTET_CONTROL("Analog In 1/2 to Monitor 1/2", sw, IN12_MON12),
+	QTET_CONTROL("Analog In 1/2 to Monitor 3/4", sw, IN12_MON34),
+	QTET_CONTROL("Analog In 3/4 to Monitor 1/2", sw, IN34_MON12),
+	QTET_CONTROL("Analog In 3/4 to Monitor 3/4", sw, IN34_MON34),
+	QTET_CONTROL("Output 1/2 to Monitor 3/4", sw, OUT12_MON34),
+	QTET_CONTROL("Output 3/4 to Monitor 1/2", sw, OUT34_MON12),
+};
+
+static char *slave_vols[] __devinitdata = {
+	PCM_12_PLAYBACK_VOLUME,
+	PCM_34_PLAYBACK_VOLUME,
+	NULL
+};
+
+static __devinitdata
+DECLARE_TLV_DB_SCALE(qtet_master_db_scale, -6350, 50, 1);
+
+static struct snd_kcontrol __devinit *ctl_find(struct snd_card *card,
+		const char *name)
+{
+	struct snd_ctl_elem_id sid;
+	memset(&sid, 0, sizeof(sid));
+	/* FIXME: strcpy is bad. */
+	strcpy(sid.name, name);
+	sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+	return snd_ctl_find_id(card, &sid);
+}
+
+static void __devinit add_slaves(struct snd_card *card,
+		struct snd_kcontrol *master, char **list)
+{
+	for (; *list; list++) {
+		struct snd_kcontrol *slave = ctl_find(card, *list);
+		if (slave)
+			snd_ctl_add_slave(master, slave);
+	}
+}
+
+static int __devinit qtet_add_controls(struct snd_ice1712 *ice)
+{
+	struct qtet_spec *spec = ice->spec;
+	int err, i;
+	struct snd_kcontrol *vmaster;
+	err = snd_ice1712_akm4xxx_build_controls(ice);
+	if (err < 0)
+		return err;
+	for (i = 0; i < ARRAY_SIZE(qtet_controls); i++) {
+		err = snd_ctl_add(ice->card,
+				snd_ctl_new1(&qtet_controls[i], ice));
+		if (err < 0)
+			return err;
+	}
+
+	/* Create virtual master control */
+	vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
+			qtet_master_db_scale);
+	if (!vmaster)
+		return -ENOMEM;
+	add_slaves(ice->card, vmaster, slave_vols);
+	err = snd_ctl_add(ice->card, vmaster);
+	if (err < 0)
+		return err;
+	/* only capture SPDIF over AK4113 */
+	err = snd_ak4113_build(spec->ak4113,
+			ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
+	if (err < 0)
+		return err;
+	return 0;
+}
+
+static inline int qtet_is_spdif_master(struct snd_ice1712 *ice)
+{
+	/* CPLD_SYNC_SEL: 0 = internal, 1 = external (i.e. spdif master) */
+	return (get_cpld(ice) & CPLD_SYNC_SEL) ? 1 : 0;
+}
+
+static unsigned int qtet_get_rate(struct snd_ice1712 *ice)
+{
+	int i;
+	unsigned char result;
+
+	result =  get_cpld(ice) & CPLD_CKS_MASK;
+	for (i = 0; i < ARRAY_SIZE(cks_vals); i++)
+		if (cks_vals[i] == result)
+			return qtet_rates[i];
+	return 0;
+}
+
+static int get_cks_val(int rate)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(qtet_rates); i++)
+		if (qtet_rates[i] == rate)
+			return cks_vals[i];
+	return 0;
+}
+
+/* setting new rate */
+static void qtet_set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+	unsigned int new;
+	unsigned char val;
+	/* switching ice1724 to external clock - supplied by ext. circuits */
+	val = inb(ICEMT1724(ice, RATE));
+	outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+
+	new =  (get_cpld(ice) & ~CPLD_CKS_MASK) | get_cks_val(rate);
+	/* switch to internal clock, drop CPLD_SYNC_SEL */
+	new &= ~CPLD_SYNC_SEL;
+	/* printk(KERN_DEBUG "QT - set_rate: old %x, new %x\n",
+	   get_cpld(ice), new); */
+	set_cpld(ice, new);
+}
+
+static inline unsigned char qtet_set_mclk(struct snd_ice1712 *ice,
+		unsigned int rate)
+{
+	/* no change in master clock */
+	return 0;
+}
+
+/* setting clock to external - SPDIF */
+static int qtet_set_spdif_clock(struct snd_ice1712 *ice, int type)
+{
+	unsigned int old, new;
+
+	old = new = get_cpld(ice);
+	new &= ~(CPLD_CKS_MASK | CPLD_WORD_SEL);
+	switch (type) {
+	case EXT_SPDIF_TYPE:
+		new |= CPLD_EXT_SPDIF;
+		break;
+	case EXT_WORDCLOCK_1FS_TYPE:
+		new |= CPLD_EXT_WORDCLOCK_1FS;
+		break;
+	case EXT_WORDCLOCK_256FS_TYPE:
+		new |= CPLD_EXT_WORDCLOCK_256FS;
+		break;
+	default:
+		snd_BUG();
+	}
+	if (old != new) {
+		set_cpld(ice, new);
+		/* changed */
+		return 1;
+	}
+	return 0;
+}
+
+static int qtet_get_spdif_master_type(struct snd_ice1712 *ice)
+{
+	unsigned int val;
+	int result;
+	val = get_cpld(ice);
+	/* checking only rate/clock-related bits */
+	val &= (CPLD_CKS_MASK | CPLD_WORD_SEL | CPLD_SYNC_SEL);
+	if (!(val & CPLD_SYNC_SEL)) {
+		/* switched to internal clock, is not any external type */
+		result = -1;
+	} else {
+		switch (val) {
+		case (CPLD_EXT_SPDIF):
+			result = EXT_SPDIF_TYPE;
+			break;
+		case (CPLD_EXT_WORDCLOCK_1FS):
+			result = EXT_WORDCLOCK_1FS_TYPE;
+			break;
+		case (CPLD_EXT_WORDCLOCK_256FS):
+			result = EXT_WORDCLOCK_256FS_TYPE;
+			break;
+		default:
+			/* undefined combination of external clock setup */
+			snd_BUG();
+			result = 0;
+		}
+	}
+	return result;
+}
+
+/* Called when ak4113 detects change in the input SPDIF stream */
+static void qtet_ak4113_change(struct ak4113 *ak4113, unsigned char c0,
+		unsigned char c1)
+{
+	struct snd_ice1712 *ice = ak4113->change_callback_private;
+	int rate;
+	if ((qtet_get_spdif_master_type(ice) == EXT_SPDIF_TYPE) &&
+			c1) {
+		/* only for SPDIF master mode, rate was changed */
+		rate = snd_ak4113_external_rate(ak4113);
+		/* printk(KERN_DEBUG "ak4113 - input rate changed to %d\n",
+		   rate); */
+		qtet_akm_set_rate_val(ice->akm, rate);
+	}
+}
+
+/*
+ * If clock slaved to SPDIF-IN, setting runtime rate
+ * to the detected external rate
+ */
+static void qtet_spdif_in_open(struct snd_ice1712 *ice,
+		struct snd_pcm_substream *substream)
+{
+	struct qtet_spec *spec = ice->spec;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int rate;
+
+	if (qtet_get_spdif_master_type(ice) != EXT_SPDIF_TYPE)
+		/* not external SPDIF, no rate limitation */
+		return;
+	/* only external SPDIF can detect incoming sample rate */
+	rate = snd_ak4113_external_rate(spec->ak4113);
+	if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
+		runtime->hw.rate_min = rate;
+		runtime->hw.rate_max = rate;
+	}
+}
+
+/*
+ * initialize the chip
+ */
+static int __devinit qtet_init(struct snd_ice1712 *ice)
+{
+	static const unsigned char ak4113_init_vals[] = {
+		/* AK4113_REG_PWRDN */	AK4113_RST | AK4113_PWN |
+			AK4113_OCKS0 | AK4113_OCKS1,
+		/* AK4113_REQ_FORMAT */	AK4113_DIF_I24I2S | AK4113_VTX |
+			AK4113_DEM_OFF | AK4113_DEAU,
+		/* AK4113_REG_IO0 */	AK4113_OPS2 | AK4113_TXE |
+			AK4113_XTL_24_576M,
+		/* AK4113_REG_IO1 */	AK4113_EFH_1024LRCLK | AK4113_IPS(0),
+		/* AK4113_REG_INT0_MASK */	0,
+		/* AK4113_REG_INT1_MASK */	0,
+		/* AK4113_REG_DATDTS */		0,
+	};
+	int err;
+	struct qtet_spec *spec;
+	struct snd_akm4xxx *ak;
+	unsigned char val;
+
+	/* switching ice1724 to external clock - supplied by ext. circuits */
+	val = inb(ICEMT1724(ice, RATE));
+	outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+
+	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+	if (!spec)
+		return -ENOMEM;
+	/* qtet is clocked by Xilinx array */
+	ice->hw_rates = &qtet_rates_info;
+	ice->is_spdif_master = qtet_is_spdif_master;
+	ice->get_rate = qtet_get_rate;
+	ice->set_rate = qtet_set_rate;
+	ice->set_mclk = qtet_set_mclk;
+	ice->set_spdif_clock = qtet_set_spdif_clock;
+	ice->get_spdif_master_type = qtet_get_spdif_master_type;
+	ice->ext_clock_names = ext_clock_names;
+	ice->ext_clock_count = ARRAY_SIZE(ext_clock_names);
+	/* since Qtet can detect correct SPDIF-in rate, all streams can be
+	 * limited to this specific rate */
+	ice->spdif.ops.open = ice->pro_open = qtet_spdif_in_open;
+	ice->spec = spec;
+
+	/* Mute Off */
+	/* SCR Initialize*/
+	/* keep codec power down first */
+	set_scr(ice, SCR_PHP);
+	udelay(1);
+	/* codec power up */
+	set_scr(ice, SCR_PHP | SCR_CODEC_PDN);
+
+	/* MCR Initialize */
+	set_mcr(ice, 0);
+
+	/* CPLD Initialize */
+	set_cpld(ice, 0);
+
+
+	ice->num_total_dacs = 2;
+	ice->num_total_adcs = 2;
+
+	ice->akm = kcalloc(2, sizeof(struct snd_akm4xxx), GFP_KERNEL);
+	ak = ice->akm;
+	if (!ak)
+		return -ENOMEM;
+	/* only one codec with two chips */
+	ice->akm_codecs = 1;
+	err = snd_ice1712_akm4xxx_init(ak, &akm_qtet_dac, NULL, ice);
+	if (err < 0)
+		return err;
+	err = snd_ak4113_create(ice->card,
+			qtet_ak4113_read,
+			qtet_ak4113_write,
+			ak4113_init_vals,
+			ice, &spec->ak4113);
+	if (err < 0)
+		return err;
+	/* callback for codecs rate setting */
+	spec->ak4113->change_callback = qtet_ak4113_change;
+	spec->ak4113->change_callback_private = ice;
+	/* AK41143 in Quartet can detect external rate correctly
+	 * (i.e. check_flags = 0) */
+	spec->ak4113->check_flags = 0;
+
+	proc_init(ice);
+
+	qtet_set_rate(ice, 44100);
+	return 0;
+}
+
+static unsigned char qtet_eeprom[] __devinitdata = {
+	[ICE_EEP2_SYSCONF]     = 0x28,	/* clock 256(24MHz), mpu401, 1xADC,
+					   1xDACs, SPDIF in */
+	[ICE_EEP2_ACLINK]      = 0x80,	/* I2S */
+	[ICE_EEP2_I2S]         = 0x78,	/* 96k, 24bit, 192k */
+	[ICE_EEP2_SPDIF]       = 0xc3,	/* out-en, out-int, in, out-ext */
+	[ICE_EEP2_GPIO_DIR]    = 0x00,	/* 0-7 inputs, switched to output
+					   only during output operations */
+	[ICE_EEP2_GPIO_DIR1]   = 0xff,  /* 8-15 outputs */
+	[ICE_EEP2_GPIO_DIR2]   = 0x00,
+	[ICE_EEP2_GPIO_MASK]   = 0xff,	/* changed only for OUT operations */
+	[ICE_EEP2_GPIO_MASK1]  = 0x00,
+	[ICE_EEP2_GPIO_MASK2]  = 0xff,
+
+	[ICE_EEP2_GPIO_STATE]  = 0x00, /* inputs */
+	[ICE_EEP2_GPIO_STATE1] = 0x7d, /* all 1, but GPIO_CPLD_RW
+					  and GPIO15 always zero */
+	[ICE_EEP2_GPIO_STATE2] = 0x00, /* inputs */
+};
+
+/* entry point */
+struct snd_ice1712_card_info snd_vt1724_qtet_cards[] __devinitdata = {
+	{
+		.subvendor = VT1724_SUBDEVICE_QTET,
+		.name = "Infrasonic Quartet",
+		.model = "quartet",
+		.chip_init = qtet_init,
+		.build_controls = qtet_add_controls,
+		.eeprom_size = sizeof(qtet_eeprom),
+		.eeprom_data = qtet_eeprom,
+	},
+	{ } /* terminator */
+};
diff --git a/sound/pci/ice1712/quartet.h b/sound/pci/ice1712/quartet.h
new file mode 100644
index 0000000..80809b7
--- /dev/null
+++ b/sound/pci/ice1712/quartet.h
@@ -0,0 +1,10 @@
+#ifndef __SOUND_QTET_H
+#define __SOUND_QTET_H
+
+#define QTET_DEVICE_DESC		"{Infrasonic,Quartet},"
+
+#define VT1724_SUBDEVICE_QTET		0x30305349	/* Infrasonic Quartet */
+
+extern struct snd_ice1712_card_info  snd_vt1724_qtet_cards[];
+
+#endif	/* __SOUND_QTET_H */
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index aac20fb..b990143 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -2063,6 +2063,12 @@
 		.type = AC97_TUNE_HP_ONLY
 	},
 	{
+		.subvendor = 0x161f,
+		.subdevice = 0x203a,
+		.name = "Gateway 4525GZ",		/* AD1981B */
+		.type = AC97_TUNE_INV_EAPD
+	},
+	{
 		.subvendor = 0x1734,
 		.subdevice = 0x0088,
 		.name = "Fujitsu-Siemens D1522",	/* AD1981 */
diff --git a/sound/pci/oxygen/Makefile b/sound/pci/oxygen/Makefile
index 4ba07d4..389941c 100644
--- a/sound/pci/oxygen/Makefile
+++ b/sound/pci/oxygen/Makefile
@@ -1,7 +1,8 @@
 snd-oxygen-lib-objs := oxygen_io.o oxygen_lib.o oxygen_mixer.o oxygen_pcm.o
 snd-hifier-objs := hifier.o
 snd-oxygen-objs := oxygen.o
-snd-virtuoso-objs := virtuoso.o
+snd-virtuoso-objs := virtuoso.o xonar_lib.o \
+	xonar_pcm179x.o xonar_cs43xx.o xonar_hdmi.o
 
 obj-$(CONFIG_SND_OXYGEN_LIB) += snd-oxygen-lib.o
 obj-$(CONFIG_SND_HIFIER) += snd-hifier.o
diff --git a/sound/pci/oxygen/cs2000.h b/sound/pci/oxygen/cs2000.h
new file mode 100644
index 0000000..c3501bd
--- /dev/null
+++ b/sound/pci/oxygen/cs2000.h
@@ -0,0 +1,83 @@
+#ifndef CS2000_H_INCLUDED
+#define CS2000_H_INCLUDED
+
+#define CS2000_DEV_ID		0x01
+#define CS2000_DEV_CTRL		0x02
+#define CS2000_DEV_CFG_1	0x03
+#define CS2000_DEV_CFG_2	0x04
+#define CS2000_GLOBAL_CFG	0x05
+#define CS2000_RATIO_0		0x06 /* 32 bits, big endian */
+#define CS2000_RATIO_1		0x0a
+#define CS2000_RATIO_2		0x0e
+#define CS2000_RATIO_3		0x12
+#define CS2000_FUN_CFG_1	0x16
+#define CS2000_FUN_CFG_2	0x17
+#define CS2000_FUN_CFG_3	0x1e
+
+/* DEV_ID */
+#define CS2000_DEVICE_MASK		0xf8
+#define CS2000_REVISION_MASK		0x07
+
+/* DEV_CTRL */
+#define CS2000_UNLOCK			0x80
+#define CS2000_AUX_OUT_DIS		0x02
+#define CS2000_CLK_OUT_DIS		0x01
+
+/* DEV_CFG_1 */
+#define CS2000_R_MOD_SEL_MASK		0xe0
+#define CS2000_R_MOD_SEL_1		0x00
+#define CS2000_R_MOD_SEL_2		0x20
+#define CS2000_R_MOD_SEL_4		0x40
+#define CS2000_R_MOD_SEL_8		0x60
+#define CS2000_R_MOD_SEL_1_2		0x80
+#define CS2000_R_MOD_SEL_1_4		0xa0
+#define CS2000_R_MOD_SEL_1_8		0xc0
+#define CS2000_R_MOD_SEL_1_16		0xe0
+#define CS2000_R_SEL_MASK		0x18
+#define CS2000_R_SEL_SHIFT		3
+#define CS2000_AUX_OUT_SRC_MASK		0x06
+#define CS2000_AUX_OUT_SRC_REF_CLK	0x00
+#define CS2000_AUX_OUT_SRC_CLK_IN	0x02
+#define CS2000_AUX_OUT_SRC_CLK_OUT	0x04
+#define CS2000_AUX_OUT_SRC_PLL_LOCK	0x06
+#define CS2000_EN_DEV_CFG_1		0x01
+
+/* DEV_CFG_2 */
+#define CS2000_LOCK_CLK_MASK		0x06
+#define CS2000_LOCK_CLK_SHIFT		1
+#define CS2000_FRAC_N_SRC_MASK		0x01
+#define CS2000_FRAC_N_SRC_STATIC	0x00
+#define CS2000_FRAC_N_SRC_DYNAMIC	0x01
+
+/* GLOBAL_CFG */
+#define CS2000_FREEZE			0x08
+#define CS2000_EN_DEV_CFG_2		0x01
+
+/* FUN_CFG_1 */
+#define CS2000_CLK_SKIP_EN		0x80
+#define CS2000_AUX_LOCK_CFG_MASK	0x40
+#define CS2000_AUX_LOCK_CFG_PP_HIGH	0x00
+#define CS2000_AUX_LOCK_CFG_OD_LOW	0x40
+#define CS2000_REF_CLK_DIV_MASK		0x18
+#define CS2000_REF_CLK_DIV_4		0x00
+#define CS2000_REF_CLK_DIV_2		0x08
+#define CS2000_REF_CLK_DIV_1		0x10
+
+/* FUN_CFG_2 */
+#define CS2000_CLK_OUT_UNL		0x10
+#define CS2000_L_F_RATIO_CFG_MASK	0x08
+#define CS2000_L_F_RATIO_CFG_20_12	0x00
+#define CS2000_L_F_RATIO_CFG_12_20	0x08
+
+/* FUN_CFG_3 */
+#define CS2000_CLK_IN_BW_MASK		0x70
+#define CS2000_CLK_IN_BW_1		0x00
+#define CS2000_CLK_IN_BW_2		0x10
+#define CS2000_CLK_IN_BW_4		0x20
+#define CS2000_CLK_IN_BW_8		0x30
+#define CS2000_CLK_IN_BW_16		0x40
+#define CS2000_CLK_IN_BW_32		0x50
+#define CS2000_CLK_IN_BW_64		0x60
+#define CS2000_CLK_IN_BW_128		0x70
+
+#endif
diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 84ef131..e3c229b 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -17,6 +17,12 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+/*
+ * CMI8788:
+ *
+ * SPI 0 -> AK4396
+ */
+
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <sound/control.h>
@@ -51,23 +57,28 @@
 MODULE_DEVICE_TABLE(pci, hifier_ids);
 
 struct hifier_data {
-	u8 ak4396_ctl2;
+	u8 ak4396_regs[5];
 };
 
 static void ak4396_write(struct oxygen *chip, u8 reg, u8 value)
 {
+	struct hifier_data *data = chip->model_data;
+
 	oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER  |
 			 OXYGEN_SPI_DATA_LENGTH_2 |
 			 OXYGEN_SPI_CLOCK_160 |
 			 (0 << OXYGEN_SPI_CODEC_SHIFT) |
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
 			 AK4396_WRITE | (reg << 8) | value);
+	data->ak4396_regs[reg] = value;
 }
 
-static void update_ak4396_volume(struct oxygen *chip)
+static void ak4396_write_cached(struct oxygen *chip, u8 reg, u8 value)
 {
-	ak4396_write(chip, AK4396_LCH_ATT, chip->dac_volume[0]);
-	ak4396_write(chip, AK4396_RCH_ATT, chip->dac_volume[1]);
+	struct hifier_data *data = chip->model_data;
+
+	if (value != data->ak4396_regs[reg])
+		ak4396_write(chip, reg, value);
 }
 
 static void hifier_registers_init(struct oxygen *chip)
@@ -75,16 +86,19 @@
 	struct hifier_data *data = chip->model_data;
 
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
-	ak4396_write(chip, AK4396_CONTROL_2, data->ak4396_ctl2);
+	ak4396_write(chip, AK4396_CONTROL_2,
+		     data->ak4396_regs[AK4396_CONTROL_2]);
 	ak4396_write(chip, AK4396_CONTROL_3, AK4396_PCM);
-	update_ak4396_volume(chip);
+	ak4396_write(chip, AK4396_LCH_ATT, chip->dac_volume[0]);
+	ak4396_write(chip, AK4396_RCH_ATT, chip->dac_volume[1]);
 }
 
 static void hifier_init(struct oxygen *chip)
 {
 	struct hifier_data *data = chip->model_data;
 
-	data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
+	data->ak4396_regs[AK4396_CONTROL_2] =
+		AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
 	hifier_registers_init(chip);
 
 	snd_component_add(chip->card, "AK4396");
@@ -106,20 +120,29 @@
 	struct hifier_data *data = chip->model_data;
 	u8 value;
 
-	value = data->ak4396_ctl2 & ~AK4396_DFS_MASK;
+	value = data->ak4396_regs[AK4396_CONTROL_2] & ~AK4396_DFS_MASK;
 	if (params_rate(params) <= 54000)
 		value |= AK4396_DFS_NORMAL;
 	else if (params_rate(params) <= 108000)
 		value |= AK4396_DFS_DOUBLE;
 	else
 		value |= AK4396_DFS_QUAD;
-	data->ak4396_ctl2 = value;
 
 	msleep(1); /* wait for the new MCLK to become stable */
 
-	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
-	ak4396_write(chip, AK4396_CONTROL_2, value);
-	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
+	if (value != data->ak4396_regs[AK4396_CONTROL_2]) {
+		ak4396_write(chip, AK4396_CONTROL_1,
+			     AK4396_DIF_24_MSB);
+		ak4396_write(chip, AK4396_CONTROL_2, value);
+		ak4396_write(chip, AK4396_CONTROL_1,
+			     AK4396_DIF_24_MSB | AK4396_RSTN);
+	}
+}
+
+static void update_ak4396_volume(struct oxygen *chip)
+{
+	ak4396_write_cached(chip, AK4396_LCH_ATT, chip->dac_volume[0]);
+	ak4396_write_cached(chip, AK4396_RCH_ATT, chip->dac_volume[1]);
 }
 
 static void update_ak4396_mute(struct oxygen *chip)
@@ -127,11 +150,10 @@
 	struct hifier_data *data = chip->model_data;
 	u8 value;
 
-	value = data->ak4396_ctl2 & ~AK4396_SMUTE;
+	value = data->ak4396_regs[AK4396_CONTROL_2] & ~AK4396_SMUTE;
 	if (chip->dac_mute)
 		value |= AK4396_SMUTE;
-	data->ak4396_ctl2 = value;
-	ak4396_write(chip, AK4396_CONTROL_2, value);
+	ak4396_write_cached(chip, AK4396_CONTROL_2, value);
 }
 
 static void set_cs5340_params(struct oxygen *chip,
@@ -141,21 +163,14 @@
 
 static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
 
-static int hifier_control_filter(struct snd_kcontrol_new *template)
-{
-	if (!strcmp(template->name, "Stereo Upmixing"))
-		return 1; /* stereo only - we don't need upmixing */
-	return 0;
-}
-
 static const struct oxygen_model model_hifier = {
 	.shortname = "C-Media CMI8787",
 	.longname = "C-Media Oxygen HD Audio",
 	.chip = "CMI8788",
 	.init = hifier_init,
-	.control_filter = hifier_control_filter,
 	.cleanup = hifier_cleanup,
 	.resume = hifier_resume,
+	.get_i2s_mclk = oxygen_default_i2s_mclk,
 	.set_dac_params = set_ak4396_params,
 	.set_adc_params = set_cs5340_params,
 	.update_dac_volume = update_ak4396_volume,
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 72db4c3..acbedeb 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -18,6 +18,8 @@
  */
 
 /*
+ * CMI8788:
+ *
  * SPI 0 -> 1st AK4396 (front)
  * SPI 1 -> 2nd AK4396 (surround)
  * SPI 2 -> 3rd AK4396 (center/LFE)
@@ -27,6 +29,10 @@
  * GPIO 0 -> DFS0 of AK5385
  * GPIO 1 -> DFS1 of AK5385
  * GPIO 8 -> enable headphone amplifier on HT-Omega models
+ *
+ * CM9780:
+ *
+ * GPO 0 -> route line-in (0) or AC97 output (1) to ADC input
  */
 
 #include <linux/delay.h>
@@ -91,8 +97,8 @@
 #define GPIO_CLARO_HP		0x0100
 
 struct generic_data {
-	u8 ak4396_ctl2;
-	u16 saved_wm8785_registers[2];
+	u8 ak4396_regs[4][5];
+	u16 wm8785_regs[3];
 };
 
 static void ak4396_write(struct oxygen *chip, unsigned int codec,
@@ -102,12 +108,24 @@
 	static const u8 codec_spi_map[4] = {
 		0, 1, 2, 4
 	};
+	struct generic_data *data = chip->model_data;
+
 	oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER |
 			 OXYGEN_SPI_DATA_LENGTH_2 |
 			 OXYGEN_SPI_CLOCK_160 |
 			 (codec_spi_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
 			 AK4396_WRITE | (reg << 8) | value);
+	data->ak4396_regs[codec][reg] = value;
+}
+
+static void ak4396_write_cached(struct oxygen *chip, unsigned int codec,
+				u8 reg, u8 value)
+{
+	struct generic_data *data = chip->model_data;
+
+	if (value != data->ak4396_regs[codec][reg])
+		ak4396_write(chip, codec, reg, value);
 }
 
 static void wm8785_write(struct oxygen *chip, u8 reg, unsigned int value)
@@ -120,20 +138,8 @@
 			 (3 << OXYGEN_SPI_CODEC_SHIFT) |
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_LO,
 			 (reg << 9) | value);
-	if (reg < ARRAY_SIZE(data->saved_wm8785_registers))
-		data->saved_wm8785_registers[reg] = value;
-}
-
-static void update_ak4396_volume(struct oxygen *chip)
-{
-	unsigned int i;
-
-	for (i = 0; i < 4; ++i) {
-		ak4396_write(chip, i,
-			     AK4396_LCH_ATT, chip->dac_volume[i * 2]);
-		ak4396_write(chip, i,
-			     AK4396_RCH_ATT, chip->dac_volume[i * 2 + 1]);
-	}
+	if (reg < ARRAY_SIZE(data->wm8785_regs))
+		data->wm8785_regs[reg] = value;
 }
 
 static void ak4396_registers_init(struct oxygen *chip)
@@ -142,21 +148,25 @@
 	unsigned int i;
 
 	for (i = 0; i < 4; ++i) {
-		ak4396_write(chip, i,
-			     AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
-		ak4396_write(chip, i,
-			     AK4396_CONTROL_2, data->ak4396_ctl2);
-		ak4396_write(chip, i,
-			     AK4396_CONTROL_3, AK4396_PCM);
+		ak4396_write(chip, i, AK4396_CONTROL_1,
+			     AK4396_DIF_24_MSB | AK4396_RSTN);
+		ak4396_write(chip, i, AK4396_CONTROL_2,
+			     data->ak4396_regs[0][AK4396_CONTROL_2]);
+		ak4396_write(chip, i, AK4396_CONTROL_3,
+			     AK4396_PCM);
+		ak4396_write(chip, i, AK4396_LCH_ATT,
+			     chip->dac_volume[i * 2]);
+		ak4396_write(chip, i, AK4396_RCH_ATT,
+			     chip->dac_volume[i * 2 + 1]);
 	}
-	update_ak4396_volume(chip);
 }
 
 static void ak4396_init(struct oxygen *chip)
 {
 	struct generic_data *data = chip->model_data;
 
-	data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
+	data->ak4396_regs[0][AK4396_CONTROL_2] =
+		AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
 	ak4396_registers_init(chip);
 	snd_component_add(chip->card, "AK4396");
 }
@@ -173,17 +183,17 @@
 	struct generic_data *data = chip->model_data;
 
 	wm8785_write(chip, WM8785_R7, 0);
-	wm8785_write(chip, WM8785_R0, data->saved_wm8785_registers[0]);
-	wm8785_write(chip, WM8785_R1, data->saved_wm8785_registers[1]);
+	wm8785_write(chip, WM8785_R0, data->wm8785_regs[0]);
+	wm8785_write(chip, WM8785_R2, data->wm8785_regs[2]);
 }
 
 static void wm8785_init(struct oxygen *chip)
 {
 	struct generic_data *data = chip->model_data;
 
-	data->saved_wm8785_registers[0] = WM8785_MCR_SLAVE |
-		WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST;
-	data->saved_wm8785_registers[1] = WM8785_WL_24;
+	data->wm8785_regs[0] =
+		WM8785_MCR_SLAVE | WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST;
+	data->wm8785_regs[2] = WM8785_HPFR | WM8785_HPFL;
 	wm8785_registers_init(chip);
 	snd_component_add(chip->card, "WM8785");
 }
@@ -264,24 +274,36 @@
 	unsigned int i;
 	u8 value;
 
-	value = data->ak4396_ctl2 & ~AK4396_DFS_MASK;
+	value = data->ak4396_regs[0][AK4396_CONTROL_2] & ~AK4396_DFS_MASK;
 	if (params_rate(params) <= 54000)
 		value |= AK4396_DFS_NORMAL;
 	else if (params_rate(params) <= 108000)
 		value |= AK4396_DFS_DOUBLE;
 	else
 		value |= AK4396_DFS_QUAD;
-	data->ak4396_ctl2 = value;
 
 	msleep(1); /* wait for the new MCLK to become stable */
 
+	if (value != data->ak4396_regs[0][AK4396_CONTROL_2]) {
+		for (i = 0; i < 4; ++i) {
+			ak4396_write(chip, i, AK4396_CONTROL_1,
+				     AK4396_DIF_24_MSB);
+			ak4396_write(chip, i, AK4396_CONTROL_2, value);
+			ak4396_write(chip, i, AK4396_CONTROL_1,
+				     AK4396_DIF_24_MSB | AK4396_RSTN);
+		}
+	}
+}
+
+static void update_ak4396_volume(struct oxygen *chip)
+{
+	unsigned int i;
+
 	for (i = 0; i < 4; ++i) {
-		ak4396_write(chip, i,
-			     AK4396_CONTROL_1, AK4396_DIF_24_MSB);
-		ak4396_write(chip, i,
-			     AK4396_CONTROL_2, value);
-		ak4396_write(chip, i,
-			     AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
+		ak4396_write_cached(chip, i, AK4396_LCH_ATT,
+				    chip->dac_volume[i * 2]);
+		ak4396_write_cached(chip, i, AK4396_RCH_ATT,
+				    chip->dac_volume[i * 2 + 1]);
 	}
 }
 
@@ -291,21 +313,19 @@
 	unsigned int i;
 	u8 value;
 
-	value = data->ak4396_ctl2 & ~AK4396_SMUTE;
+	value = data->ak4396_regs[0][AK4396_CONTROL_2] & ~AK4396_SMUTE;
 	if (chip->dac_mute)
 		value |= AK4396_SMUTE;
-	data->ak4396_ctl2 = value;
 	for (i = 0; i < 4; ++i)
-		ak4396_write(chip, i, AK4396_CONTROL_2, value);
+		ak4396_write_cached(chip, i, AK4396_CONTROL_2, value);
 }
 
 static void set_wm8785_params(struct oxygen *chip,
 			      struct snd_pcm_hw_params *params)
 {
+	struct generic_data *data = chip->model_data;
 	unsigned int value;
 
-	wm8785_write(chip, WM8785_R7, 0);
-
 	value = WM8785_MCR_SLAVE | WM8785_FORMAT_LJUST;
 	if (params_rate(params) <= 48000)
 		value |= WM8785_OSR_SINGLE;
@@ -313,13 +333,11 @@
 		value |= WM8785_OSR_DOUBLE;
 	else
 		value |= WM8785_OSR_QUAD;
-	wm8785_write(chip, WM8785_R0, value);
-
-	if (snd_pcm_format_width(params_format(params)) <= 16)
-		value = WM8785_WL_16;
-	else
-		value = WM8785_WL_24;
-	wm8785_write(chip, WM8785_R1, value);
+	if (value != data->wm8785_regs[0]) {
+		wm8785_write(chip, WM8785_R7, 0);
+		wm8785_write(chip, WM8785_R0, value);
+		wm8785_write(chip, WM8785_R2, data->wm8785_regs[2]);
+	}
 }
 
 static void set_ak5385_params(struct oxygen *chip,
@@ -337,6 +355,134 @@
 			      value, GPIO_AK5385_DFS_MASK);
 }
 
+static int rolloff_info(struct snd_kcontrol *ctl,
+			struct snd_ctl_elem_info *info)
+{
+	static const char *const names[2] = {
+		"Sharp Roll-off", "Slow Roll-off"
+	};
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 2;
+	if (info->value.enumerated.item >= 2)
+		info->value.enumerated.item = 1;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int rolloff_get(struct snd_kcontrol *ctl,
+		       struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct generic_data *data = chip->model_data;
+
+	value->value.enumerated.item[0] =
+		(data->ak4396_regs[0][AK4396_CONTROL_2] & AK4396_SLOW) != 0;
+	return 0;
+}
+
+static int rolloff_put(struct snd_kcontrol *ctl,
+		       struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct generic_data *data = chip->model_data;
+	unsigned int i;
+	int changed;
+	u8 reg;
+
+	mutex_lock(&chip->mutex);
+	reg = data->ak4396_regs[0][AK4396_CONTROL_2];
+	if (value->value.enumerated.item[0])
+		reg |= AK4396_SLOW;
+	else
+		reg &= ~AK4396_SLOW;
+	changed = reg != data->ak4396_regs[0][AK4396_CONTROL_2];
+	if (changed) {
+		for (i = 0; i < 4; ++i)
+			ak4396_write(chip, i, AK4396_CONTROL_2, reg);
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+static const struct snd_kcontrol_new rolloff_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DAC Filter Playback Enum",
+	.info = rolloff_info,
+	.get = rolloff_get,
+	.put = rolloff_put,
+};
+
+static int hpf_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info)
+{
+	static const char *const names[2] = {
+		"None", "High-pass Filter"
+	};
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 2;
+	if (info->value.enumerated.item >= 2)
+		info->value.enumerated.item = 1;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int hpf_get(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct generic_data *data = chip->model_data;
+
+	value->value.enumerated.item[0] =
+		(data->wm8785_regs[WM8785_R2] & WM8785_HPFR) != 0;
+	return 0;
+}
+
+static int hpf_put(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct generic_data *data = chip->model_data;
+	unsigned int reg;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	reg = data->wm8785_regs[WM8785_R2] & ~(WM8785_HPFR | WM8785_HPFL);
+	if (value->value.enumerated.item[0])
+		reg |= WM8785_HPFR | WM8785_HPFL;
+	changed = reg != data->wm8785_regs[WM8785_R2];
+	if (changed)
+		wm8785_write(chip, WM8785_R2, reg);
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+static const struct snd_kcontrol_new hpf_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "ADC Filter Capture Enum",
+	.info = hpf_info,
+	.get = hpf_get,
+	.put = hpf_put,
+};
+
+static int generic_mixer_init(struct oxygen *chip)
+{
+	return snd_ctl_add(chip->card, snd_ctl_new1(&rolloff_control, chip));
+}
+
+static int generic_wm8785_mixer_init(struct oxygen *chip)
+{
+	int err;
+
+	err = generic_mixer_init(chip);
+	if (err < 0)
+		return err;
+	err = snd_ctl_add(chip->card, snd_ctl_new1(&hpf_control, chip));
+	if (err < 0)
+		return err;
+	return 0;
+}
+
 static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0);
 
 static const struct oxygen_model model_generic = {
@@ -344,8 +490,10 @@
 	.longname = "C-Media Oxygen HD Audio",
 	.chip = "CMI8788",
 	.init = generic_init,
+	.mixer_init = generic_wm8785_mixer_init,
 	.cleanup = generic_cleanup,
 	.resume = generic_resume,
+	.get_i2s_mclk = oxygen_default_i2s_mclk,
 	.set_dac_params = set_ak4396_params,
 	.set_adc_params = set_wm8785_params,
 	.update_dac_volume = update_ak4396_volume,
@@ -374,6 +522,7 @@
 	switch (id->driver_data) {
 	case MODEL_MERIDIAN:
 		chip->model.init = meridian_init;
+		chip->model.mixer_init = generic_mixer_init;
 		chip->model.resume = meridian_resume;
 		chip->model.set_adc_params = set_ak5385_params;
 		chip->model.device_config = PLAYBACK_0_TO_I2S |
@@ -389,6 +538,7 @@
 		break;
 	case MODEL_CLARO_HALO:
 		chip->model.init = claro_halo_init;
+		chip->model.mixer_init = generic_mixer_init;
 		chip->model.cleanup = claro_cleanup;
 		chip->model.suspend = claro_suspend;
 		chip->model.resume = claro_resume;
diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h
index bd615db..6147216 100644
--- a/sound/pci/oxygen/oxygen.h
+++ b/sound/pci/oxygen/oxygen.h
@@ -78,12 +78,15 @@
 	void (*resume)(struct oxygen *chip);
 	void (*pcm_hardware_filter)(unsigned int channel,
 				    struct snd_pcm_hardware *hardware);
+	unsigned int (*get_i2s_mclk)(struct oxygen *chip, unsigned int channel,
+				     struct snd_pcm_hw_params *hw_params);
 	void (*set_dac_params)(struct oxygen *chip,
 			       struct snd_pcm_hw_params *params);
 	void (*set_adc_params)(struct oxygen *chip,
 			       struct snd_pcm_hw_params *params);
 	void (*update_dac_volume)(struct oxygen *chip);
 	void (*update_dac_mute)(struct oxygen *chip);
+	void (*update_center_lfe_mix)(struct oxygen *chip, bool mixed);
 	void (*gpio_changed)(struct oxygen *chip);
 	void (*uart_input)(struct oxygen *chip);
 	void (*ac97_switch)(struct oxygen *chip,
@@ -162,6 +165,8 @@
 /* oxygen_pcm.c */
 
 int oxygen_pcm_init(struct oxygen *chip);
+unsigned int oxygen_default_i2s_mclk(struct oxygen *chip, unsigned int channel,
+				     struct snd_pcm_hw_params *hw_params);
 
 /* oxygen_io.c */
 
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index 9a8936e..9c5e645 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -278,7 +278,11 @@
 static void oxygen_restore_eeprom(struct oxygen *chip,
 				  const struct pci_device_id *id)
 {
-	if (oxygen_read_eeprom(chip, 0) != OXYGEN_EEPROM_ID) {
+	u16 eeprom_id;
+
+	eeprom_id = oxygen_read_eeprom(chip, 0);
+	if (eeprom_id != OXYGEN_EEPROM_ID &&
+	    (eeprom_id != 0xffff || id->subdevice != 0x8788)) {
 		/*
 		 * This function gets called only when a known card model has
 		 * been detected, i.e., we know there is a valid subsystem
@@ -303,6 +307,28 @@
 	}
 }
 
+static void pci_bridge_magic(void)
+{
+	struct pci_dev *pci = NULL;
+	u32 tmp;
+
+	for (;;) {
+		/* If there is any Pericom PI7C9X110 PCI-E/PCI bridge ... */
+		pci = pci_get_device(0x12d8, 0xe110, pci);
+		if (!pci)
+			break;
+		/*
+		 * ... configure its secondary internal arbiter to park to
+		 * the secondary port, instead of to the last master.
+		 */
+		if (!pci_read_config_dword(pci, 0x40, &tmp)) {
+			tmp |= 1;
+			pci_write_config_dword(pci, 0x40, tmp);
+		}
+		/* Why?  Try asking C-Media. */
+	}
+}
+
 static void oxygen_init(struct oxygen *chip)
 {
 	unsigned int i;
@@ -581,6 +607,7 @@
 	snd_card_set_dev(card, &pci->dev);
 	card->private_free = oxygen_card_free;
 
+	pci_bridge_magic();
 	oxygen_init(chip);
 	chip->model.init(chip);
 
diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 5401c54..f375b8a 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -99,11 +99,15 @@
 
 static int upmix_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info)
 {
-	static const char *const names[3] = {
-		"Front", "Front+Surround", "Front+Surround+Back"
+	static const char *const names[5] = {
+		"Front",
+		"Front+Surround",
+		"Front+Surround+Back",
+		"Front+Surround+Center/LFE",
+		"Front+Surround+Center/LFE+Back",
 	};
 	struct oxygen *chip = ctl->private_data;
-	unsigned int count = 2 + (chip->model.dac_channels == 8);
+	unsigned int count = chip->model.update_center_lfe_mix ? 5 : 3;
 
 	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
 	info->count = 1;
@@ -127,7 +131,7 @@
 void oxygen_update_dac_routing(struct oxygen *chip)
 {
 	/* DAC 0: front, DAC 1: surround, DAC 2: center/LFE, DAC 3: back */
-	static const unsigned int reg_values[3] = {
+	static const unsigned int reg_values[5] = {
 		/* stereo -> front */
 		(0 << OXYGEN_PLAY_DAC0_SOURCE_SHIFT) |
 		(1 << OXYGEN_PLAY_DAC1_SOURCE_SHIFT) |
@@ -143,6 +147,16 @@
 		(0 << OXYGEN_PLAY_DAC1_SOURCE_SHIFT) |
 		(2 << OXYGEN_PLAY_DAC2_SOURCE_SHIFT) |
 		(0 << OXYGEN_PLAY_DAC3_SOURCE_SHIFT),
+		/* stereo -> front+surround+center/LFE */
+		(0 << OXYGEN_PLAY_DAC0_SOURCE_SHIFT) |
+		(0 << OXYGEN_PLAY_DAC1_SOURCE_SHIFT) |
+		(0 << OXYGEN_PLAY_DAC2_SOURCE_SHIFT) |
+		(3 << OXYGEN_PLAY_DAC3_SOURCE_SHIFT),
+		/* stereo -> front+surround+center/LFE+back */
+		(0 << OXYGEN_PLAY_DAC0_SOURCE_SHIFT) |
+		(0 << OXYGEN_PLAY_DAC1_SOURCE_SHIFT) |
+		(0 << OXYGEN_PLAY_DAC2_SOURCE_SHIFT) |
+		(0 << OXYGEN_PLAY_DAC3_SOURCE_SHIFT),
 	};
 	u8 channels;
 	unsigned int reg_value;
@@ -167,22 +181,23 @@
 			      OXYGEN_PLAY_DAC1_SOURCE_MASK |
 			      OXYGEN_PLAY_DAC2_SOURCE_MASK |
 			      OXYGEN_PLAY_DAC3_SOURCE_MASK);
+	if (chip->model.update_center_lfe_mix)
+		chip->model.update_center_lfe_mix(chip, chip->dac_routing > 2);
 }
 
 static int upmix_put(struct snd_kcontrol *ctl, struct snd_ctl_elem_value *value)
 {
 	struct oxygen *chip = ctl->private_data;
-	unsigned int count = 2 + (chip->model.dac_channels == 8);
+	unsigned int count = chip->model.update_center_lfe_mix ? 5 : 3;
 	int changed;
 
+	if (value->value.enumerated.item[0] >= count)
+		return -EINVAL;
 	mutex_lock(&chip->mutex);
 	changed = value->value.enumerated.item[0] != chip->dac_routing;
 	if (changed) {
-		chip->dac_routing = min(value->value.enumerated.item[0],
-					count - 1);
-		spin_lock_irq(&chip->reg_lock);
+		chip->dac_routing = value->value.enumerated.item[0];
 		oxygen_update_dac_routing(chip);
-		spin_unlock_irq(&chip->reg_lock);
 	}
 	mutex_unlock(&chip->mutex);
 	return changed;
@@ -790,7 +805,7 @@
 		.controls = {
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Analog Input Monitor Switch",
+				.name = "Analog Input Monitor Playback Switch",
 				.info = snd_ctl_boolean_mono_info,
 				.get = monitor_get,
 				.put = monitor_put,
@@ -798,7 +813,7 @@
 			},
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Analog Input Monitor Volume",
+				.name = "Analog Input Monitor Playback Volume",
 				.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
 					  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
 				.info = monitor_volume_info,
@@ -815,7 +830,7 @@
 		.controls = {
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Analog Input Monitor Switch",
+				.name = "Analog Input Monitor Playback Switch",
 				.info = snd_ctl_boolean_mono_info,
 				.get = monitor_get,
 				.put = monitor_put,
@@ -823,7 +838,7 @@
 			},
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Analog Input Monitor Volume",
+				.name = "Analog Input Monitor Playback Volume",
 				.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
 					  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
 				.info = monitor_volume_info,
@@ -840,7 +855,7 @@
 		.controls = {
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Analog Input Monitor Switch",
+				.name = "Analog Input Monitor Playback Switch",
 				.index = 1,
 				.info = snd_ctl_boolean_mono_info,
 				.get = monitor_get,
@@ -849,7 +864,7 @@
 			},
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Analog Input Monitor Volume",
+				.name = "Analog Input Monitor Playback Volume",
 				.index = 1,
 				.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
 					  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
@@ -867,7 +882,7 @@
 		.controls = {
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Digital Input Monitor Switch",
+				.name = "Digital Input Monitor Playback Switch",
 				.info = snd_ctl_boolean_mono_info,
 				.get = monitor_get,
 				.put = monitor_put,
@@ -875,7 +890,7 @@
 			},
 			{
 				.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-				.name = "Digital Input Monitor Volume",
+				.name = "Digital Input Monitor Playback Volume",
 				.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
 					  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
 				.info = monitor_volume_info,
@@ -954,6 +969,9 @@
 			if (err == 1)
 				continue;
 		}
+		if (!strcmp(template.name, "Stereo Upmixing") &&
+		    chip->model.dac_channels == 2)
+			continue;
 		if (!strcmp(template.name, "Master Playback Volume") &&
 		    chip->model.dac_tlv) {
 			template.tlv.p = chip->model.dac_tlv;
diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c
index ef2345d..9dff695 100644
--- a/sound/pci/oxygen/oxygen_pcm.c
+++ b/sound/pci/oxygen/oxygen_pcm.c
@@ -271,13 +271,16 @@
 	}
 }
 
-static unsigned int oxygen_i2s_mclk(struct snd_pcm_hw_params *hw_params)
+unsigned int oxygen_default_i2s_mclk(struct oxygen *chip,
+				     unsigned int channel,
+				     struct snd_pcm_hw_params *hw_params)
 {
 	if (params_rate(hw_params) <= 96000)
 		return OXYGEN_I2S_MCLK_256;
 	else
 		return OXYGEN_I2S_MCLK_128;
 }
+EXPORT_SYMBOL(oxygen_default_i2s_mclk);
 
 static unsigned int oxygen_i2s_bits(struct snd_pcm_hw_params *hw_params)
 {
@@ -354,7 +357,7 @@
 			     OXYGEN_REC_FORMAT_A_MASK);
 	oxygen_write16_masked(chip, OXYGEN_I2S_A_FORMAT,
 			      oxygen_rate(hw_params) |
-			      oxygen_i2s_mclk(hw_params) |
+			      chip->model.get_i2s_mclk(chip, PCM_A, hw_params) |
 			      chip->model.adc_i2s_format |
 			      oxygen_i2s_bits(hw_params),
 			      OXYGEN_I2S_RATE_MASK |
@@ -390,7 +393,8 @@
 	if (!is_ac97)
 		oxygen_write16_masked(chip, OXYGEN_I2S_B_FORMAT,
 				      oxygen_rate(hw_params) |
-				      oxygen_i2s_mclk(hw_params) |
+				      chip->model.get_i2s_mclk(chip, PCM_B,
+							       hw_params) |
 				      chip->model.adc_i2s_format |
 				      oxygen_i2s_bits(hw_params),
 				      OXYGEN_I2S_RATE_MASK |
@@ -435,6 +439,7 @@
 	if (err < 0)
 		return err;
 
+	mutex_lock(&chip->mutex);
 	spin_lock_irq(&chip->reg_lock);
 	oxygen_clear_bits32(chip, OXYGEN_SPDIF_CONTROL,
 			    OXYGEN_SPDIF_OUT_ENABLE);
@@ -446,6 +451,7 @@
 			      OXYGEN_SPDIF_OUT_RATE_MASK);
 	oxygen_update_spdif_source(chip);
 	spin_unlock_irq(&chip->reg_lock);
+	mutex_unlock(&chip->mutex);
 	return 0;
 }
 
@@ -459,6 +465,7 @@
 	if (err < 0)
 		return err;
 
+	mutex_lock(&chip->mutex);
 	spin_lock_irq(&chip->reg_lock);
 	oxygen_write8_masked(chip, OXYGEN_PLAY_CHANNELS,
 			     oxygen_play_channels(hw_params),
@@ -469,18 +476,18 @@
 	oxygen_write16_masked(chip, OXYGEN_I2S_MULTICH_FORMAT,
 			      oxygen_rate(hw_params) |
 			      chip->model.dac_i2s_format |
-			      oxygen_i2s_mclk(hw_params) |
+			      chip->model.get_i2s_mclk(chip, PCM_MULTICH,
+						       hw_params) |
 			      oxygen_i2s_bits(hw_params),
 			      OXYGEN_I2S_RATE_MASK |
 			      OXYGEN_I2S_FORMAT_MASK |
 			      OXYGEN_I2S_MCLK_MASK |
 			      OXYGEN_I2S_BITS_MASK);
-	oxygen_update_dac_routing(chip);
 	oxygen_update_spdif_source(chip);
 	spin_unlock_irq(&chip->reg_lock);
 
-	mutex_lock(&chip->mutex);
 	chip->model.set_dac_params(chip, hw_params);
+	oxygen_update_dac_routing(chip);
 	mutex_unlock(&chip->mutex);
 	return 0;
 }
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 6ebcb6b..6accaf9 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -17,145 +17,12 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
-/*
- * Xonar D2/D2X
- * ------------
- *
- * CMI8788:
- *
- * SPI 0 -> 1st PCM1796 (front)
- * SPI 1 -> 2nd PCM1796 (surround)
- * SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back)
- *
- * GPIO 2 -> M0 of CS5381
- * GPIO 3 -> M1 of CS5381
- * GPIO 5 <- external power present (D2X only)
- * GPIO 7 -> ALT
- * GPIO 8 -> enable output to speakers
- */
-
-/*
- * Xonar D1/DX
- * -----------
- *
- * CMI8788:
- *
- * I²C <-> CS4398 (front)
- *     <-> CS4362A (surround, center/LFE, back)
- *
- * GPI 0 <- external power present (DX only)
- *
- * GPIO 0 -> enable output to speakers
- * GPIO 1 -> enable front panel I/O
- * GPIO 2 -> M0 of CS5361
- * GPIO 3 -> M1 of CS5361
- * GPIO 8 -> route input jack to line-in (0) or mic-in (1)
- *
- * CS4398:
- *
- * AD0 <- 1
- * AD1 <- 1
- *
- * CS4362A:
- *
- * AD0 <- 0
- */
-
-/*
- * Xonar HDAV1.3 (Deluxe)
- * ----------------------
- *
- * CMI8788:
- *
- * I²C <-> PCM1796 (front)
- *
- * GPI 0 <- external power present
- *
- * GPIO 0 -> enable output to speakers
- * GPIO 2 -> M0 of CS5381
- * GPIO 3 -> M1 of CS5381
- * GPIO 8 -> route input jack to line-in (0) or mic-in (1)
- *
- * TXD -> HDMI controller
- * RXD <- HDMI controller
- *
- * PCM1796 front: AD1,0 <- 0,0
- *
- * no daughterboard
- * ----------------
- *
- * GPIO 4 <- 1
- *
- * H6 daughterboard
- * ----------------
- *
- * GPIO 4 <- 0
- * GPIO 5 <- 0
- *
- * I²C <-> PCM1796 (surround)
- *     <-> PCM1796 (center/LFE)
- *     <-> PCM1796 (back)
- *
- * PCM1796 surround:   AD1,0 <- 0,1
- * PCM1796 center/LFE: AD1,0 <- 1,0
- * PCM1796 back:       AD1,0 <- 1,1
- *
- * unknown daughterboard
- * ---------------------
- *
- * GPIO 4 <- 0
- * GPIO 5 <- 1
- *
- * I²C <-> CS4362A (surround, center/LFE, back)
- *
- * CS4362A: AD0 <- 0
- */
-
-/*
- * Xonar Essence ST (Deluxe)/STX
- * -----------------------------
- *
- * CMI8788:
- *
- * I²C <-> PCM1792A
- *
- * GPI 0 <- external power present
- *
- * GPIO 0 -> enable output to speakers
- * GPIO 1 -> route HP to front panel (0) or rear jack (1)
- * GPIO 2 -> M0 of CS5381
- * GPIO 3 -> M1 of CS5381
- * GPIO 7 -> route output to speaker jacks (0) or HP (1)
- * GPIO 8 -> route input jack to line-in (0) or mic-in (1)
- *
- * PCM1792A:
- *
- * AD0 <- 0
- *
- * H6 daughterboard
- * ----------------
- *
- * GPIO 4 <- 0
- * GPIO 5 <- 0
- */
-
 #include <linux/pci.h>
 #include <linux/delay.h>
-#include <linux/mutex.h>
-#include <sound/ac97_codec.h>
-#include <sound/asoundef.h>
-#include <sound/control.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/tlv.h>
-#include "oxygen.h"
-#include "cm9780.h"
-#include "pcm1796.h"
-#include "cs4398.h"
-#include "cs4362a.h"
+#include "xonar.h"
 
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_DESCRIPTION("Asus AVx00 driver");
@@ -173,972 +40,28 @@
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "enable card");
 
-enum {
-	MODEL_D2,
-	MODEL_D2X,
-	MODEL_D1,
-	MODEL_DX,
-	MODEL_HDAV,	/* without daughterboard */
-	MODEL_HDAV_H6,	/* with H6 daughterboard */
-	MODEL_ST,
-	MODEL_ST_H6,
-	MODEL_STX,
-};
-
 static struct pci_device_id xonar_ids[] __devinitdata = {
-	{ OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x8314), .driver_data = MODEL_HDAV },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x8327), .driver_data = MODEL_DX },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x835c), .driver_data = MODEL_STX },
-	{ OXYGEN_PCI_SUBID(0x1043, 0x835d), .driver_data = MODEL_ST },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8269) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8275) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x82b7) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8314) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x8327) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x834f) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x835c) },
+	{ OXYGEN_PCI_SUBID(0x1043, 0x835d) },
 	{ OXYGEN_PCI_SUBID_BROKEN_EEPROM },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, xonar_ids);
 
-
-#define GPIO_CS53x1_M_MASK	0x000c
-#define GPIO_CS53x1_M_SINGLE	0x0000
-#define GPIO_CS53x1_M_DOUBLE	0x0004
-#define GPIO_CS53x1_M_QUAD	0x0008
-
-#define GPIO_D2X_EXT_POWER	0x0020
-#define GPIO_D2_ALT		0x0080
-#define GPIO_D2_OUTPUT_ENABLE	0x0100
-
-#define GPI_DX_EXT_POWER	0x01
-#define GPIO_DX_OUTPUT_ENABLE	0x0001
-#define GPIO_DX_FRONT_PANEL	0x0002
-#define GPIO_DX_INPUT_ROUTE	0x0100
-
-#define GPIO_DB_MASK		0x0030
-#define GPIO_DB_H6		0x0000
-#define GPIO_DB_XX		0x0020
-
-#define GPIO_ST_HP_REAR		0x0002
-#define GPIO_ST_HP		0x0080
-
-#define I2C_DEVICE_PCM1796(i)	(0x98 + ((i) << 1))	/* 10011, ADx=i, /W=0 */
-#define I2C_DEVICE_CS4398	0x9e	/* 10011, AD1=1, AD0=1, /W=0 */
-#define I2C_DEVICE_CS4362A	0x30	/* 001100, AD0=0, /W=0 */
-
-struct xonar_data {
-	unsigned int anti_pop_delay;
-	unsigned int dacs;
-	u16 output_enable_bit;
-	u8 ext_power_reg;
-	u8 ext_power_int_reg;
-	u8 ext_power_bit;
-	u8 has_power;
-	u8 pcm1796_oversampling;
-	u8 cs4398_fm;
-	u8 cs4362a_fm;
-	u8 hdmi_params[5];
-};
-
-static void xonar_gpio_changed(struct oxygen *chip);
-
-static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
-				     u8 reg, u8 value)
-{
-	/* maps ALSA channel pair number to SPI output */
-	static const u8 codec_map[4] = {
-		0, 1, 2, 4
-	};
-	oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER  |
-			 OXYGEN_SPI_DATA_LENGTH_2 |
-			 OXYGEN_SPI_CLOCK_160 |
-			 (codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
-			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
-			 (reg << 8) | value);
-}
-
-static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
-				     u8 reg, u8 value)
-{
-	oxygen_write_i2c(chip, I2C_DEVICE_PCM1796(codec), reg, value);
-}
-
-static void pcm1796_write(struct oxygen *chip, unsigned int codec,
-			  u8 reg, u8 value)
-{
-	if ((chip->model.function_flags & OXYGEN_FUNCTION_2WIRE_SPI_MASK) ==
-	    OXYGEN_FUNCTION_SPI)
-		pcm1796_write_spi(chip, codec, reg, value);
-	else
-		pcm1796_write_i2c(chip, codec, reg, value);
-}
-
-static void cs4398_write(struct oxygen *chip, u8 reg, u8 value)
-{
-	oxygen_write_i2c(chip, I2C_DEVICE_CS4398, reg, value);
-}
-
-static void cs4362a_write(struct oxygen *chip, u8 reg, u8 value)
-{
-	oxygen_write_i2c(chip, I2C_DEVICE_CS4362A, reg, value);
-}
-
-static void hdmi_write_command(struct oxygen *chip, u8 command,
-			       unsigned int count, const u8 *params)
-{
-	unsigned int i;
-	u8 checksum;
-
-	oxygen_write_uart(chip, 0xfb);
-	oxygen_write_uart(chip, 0xef);
-	oxygen_write_uart(chip, command);
-	oxygen_write_uart(chip, count);
-	for (i = 0; i < count; ++i)
-		oxygen_write_uart(chip, params[i]);
-	checksum = 0xfb + 0xef + command + count;
-	for (i = 0; i < count; ++i)
-		checksum += params[i];
-	oxygen_write_uart(chip, checksum);
-}
-
-static void xonar_enable_output(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	msleep(data->anti_pop_delay);
-	oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
-}
-
-static void xonar_common_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	if (data->ext_power_reg) {
-		oxygen_set_bits8(chip, data->ext_power_int_reg,
-				 data->ext_power_bit);
-		chip->interrupt_mask |= OXYGEN_INT_GPIO;
-		chip->model.gpio_changed = xonar_gpio_changed;
-		data->has_power = !!(oxygen_read8(chip, data->ext_power_reg)
-				     & data->ext_power_bit);
-	}
-	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
-			  GPIO_CS53x1_M_MASK | data->output_enable_bit);
-	oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
-			      GPIO_CS53x1_M_SINGLE, GPIO_CS53x1_M_MASK);
-	oxygen_ac97_set_bits(chip, 0, CM9780_JACK, CM9780_FMIC2MIC);
-	xonar_enable_output(chip);
-}
-
-static void update_pcm1796_volume(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-	unsigned int i;
-
-	for (i = 0; i < data->dacs; ++i) {
-		pcm1796_write(chip, i, 16, chip->dac_volume[i * 2]);
-		pcm1796_write(chip, i, 17, chip->dac_volume[i * 2 + 1]);
-	}
-}
-
-static void update_pcm1796_mute(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-	unsigned int i;
-	u8 value;
-
-	value = PCM1796_DMF_DISABLED | PCM1796_FMT_24_LJUST | PCM1796_ATLD;
-	if (chip->dac_mute)
-		value |= PCM1796_MUTE;
-	for (i = 0; i < data->dacs; ++i)
-		pcm1796_write(chip, i, 18, value);
-}
-
-static void pcm1796_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-	unsigned int i;
-
-	for (i = 0; i < data->dacs; ++i) {
-		pcm1796_write(chip, i, 19, PCM1796_FLT_SHARP | PCM1796_ATS_1);
-		pcm1796_write(chip, i, 20, data->pcm1796_oversampling);
-		pcm1796_write(chip, i, 21, 0);
-	}
-	update_pcm1796_mute(chip); /* set ATLD before ATL/ATR */
-	update_pcm1796_volume(chip);
-}
-
-static void xonar_d2_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->anti_pop_delay = 300;
-	data->dacs = 4;
-	data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE;
-	data->pcm1796_oversampling = PCM1796_OS_64;
-
-	pcm1796_init(chip);
-
-	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2_ALT);
-	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_D2_ALT);
-
-	xonar_common_init(chip);
-
-	snd_component_add(chip->card, "PCM1796");
-	snd_component_add(chip->card, "CS5381");
-}
-
-static void xonar_d2x_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->ext_power_reg = OXYGEN_GPIO_DATA;
-	data->ext_power_int_reg = OXYGEN_GPIO_INTERRUPT_MASK;
-	data->ext_power_bit = GPIO_D2X_EXT_POWER;
-	oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2X_EXT_POWER);
-
-	xonar_d2_init(chip);
-}
-
-static void update_cs4362a_volumes(struct oxygen *chip)
-{
-	u8 mute;
-
-	mute = chip->dac_mute ? CS4362A_MUTE : 0;
-	cs4362a_write(chip, 7, (127 - chip->dac_volume[2]) | mute);
-	cs4362a_write(chip, 8, (127 - chip->dac_volume[3]) | mute);
-	cs4362a_write(chip, 10, (127 - chip->dac_volume[4]) | mute);
-	cs4362a_write(chip, 11, (127 - chip->dac_volume[5]) | mute);
-	cs4362a_write(chip, 13, (127 - chip->dac_volume[6]) | mute);
-	cs4362a_write(chip, 14, (127 - chip->dac_volume[7]) | mute);
-}
-
-static void update_cs43xx_volume(struct oxygen *chip)
-{
-	cs4398_write(chip, 5, (127 - chip->dac_volume[0]) * 2);
-	cs4398_write(chip, 6, (127 - chip->dac_volume[1]) * 2);
-	update_cs4362a_volumes(chip);
-}
-
-static void update_cs43xx_mute(struct oxygen *chip)
-{
-	u8 reg;
-
-	reg = CS4398_MUTEP_LOW | CS4398_PAMUTE;
-	if (chip->dac_mute)
-		reg |= CS4398_MUTE_B | CS4398_MUTE_A;
-	cs4398_write(chip, 4, reg);
-	update_cs4362a_volumes(chip);
-}
-
-static void cs43xx_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	/* set CPEN (control port mode) and power down */
-	cs4398_write(chip, 8, CS4398_CPEN | CS4398_PDN);
-	cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
-	/* configure */
-	cs4398_write(chip, 2, data->cs4398_fm);
-	cs4398_write(chip, 3, CS4398_ATAPI_B_R | CS4398_ATAPI_A_L);
-	cs4398_write(chip, 7, CS4398_RMP_DN | CS4398_RMP_UP |
-		     CS4398_ZERO_CROSS | CS4398_SOFT_RAMP);
-	cs4362a_write(chip, 0x02, CS4362A_DIF_LJUST);
-	cs4362a_write(chip, 0x03, CS4362A_MUTEC_6 | CS4362A_AMUTE |
-		      CS4362A_RMP_UP | CS4362A_ZERO_CROSS | CS4362A_SOFT_RAMP);
-	cs4362a_write(chip, 0x04, CS4362A_RMP_DN | CS4362A_DEM_NONE);
-	cs4362a_write(chip, 0x05, 0);
-	cs4362a_write(chip, 0x06, data->cs4362a_fm);
-	cs4362a_write(chip, 0x09, data->cs4362a_fm);
-	cs4362a_write(chip, 0x0c, data->cs4362a_fm);
-	update_cs43xx_volume(chip);
-	update_cs43xx_mute(chip);
-	/* clear power down */
-	cs4398_write(chip, 8, CS4398_CPEN);
-	cs4362a_write(chip, 0x01, CS4362A_CPEN);
-}
-
-static void xonar_d1_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->anti_pop_delay = 800;
-	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
-	data->cs4362a_fm = CS4362A_FM_SINGLE |
-		CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
-
-	oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
-		       OXYGEN_2WIRE_LENGTH_8 |
-		       OXYGEN_2WIRE_INTERRUPT_MASK |
-		       OXYGEN_2WIRE_SPEED_FAST);
-
-	cs43xx_init(chip);
-
-	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
-			  GPIO_DX_FRONT_PANEL | GPIO_DX_INPUT_ROUTE);
-	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA,
-			    GPIO_DX_FRONT_PANEL | GPIO_DX_INPUT_ROUTE);
-
-	xonar_common_init(chip);
-
-	snd_component_add(chip->card, "CS4398");
-	snd_component_add(chip->card, "CS4362A");
-	snd_component_add(chip->card, "CS5361");
-}
-
-static void xonar_dx_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
-
-	xonar_d1_init(chip);
-}
-
-static void xonar_hdav_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-	u8 param;
-
-	oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
-		       OXYGEN_2WIRE_LENGTH_8 |
-		       OXYGEN_2WIRE_INTERRUPT_MASK |
-		       OXYGEN_2WIRE_SPEED_FAST);
-
-	data->anti_pop_delay = 100;
-	data->dacs = chip->model.private_data == MODEL_HDAV_H6 ? 4 : 1;
-	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
-	data->pcm1796_oversampling = PCM1796_OS_64;
-
-	pcm1796_init(chip);
-
-	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DX_INPUT_ROUTE);
-	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_DX_INPUT_ROUTE);
-
-	oxygen_reset_uart(chip);
-	param = 0;
-	hdmi_write_command(chip, 0x61, 1, &param);
-	param = 1;
-	hdmi_write_command(chip, 0x74, 1, &param);
-	data->hdmi_params[1] = IEC958_AES3_CON_FS_48000;
-	data->hdmi_params[4] = 1;
-	hdmi_write_command(chip, 0x54, 5, data->hdmi_params);
-
-	xonar_common_init(chip);
-
-	snd_component_add(chip->card, "PCM1796");
-	snd_component_add(chip->card, "CS5381");
-}
-
-static void xonar_st_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
-		       OXYGEN_2WIRE_LENGTH_8 |
-		       OXYGEN_2WIRE_INTERRUPT_MASK |
-		       OXYGEN_2WIRE_SPEED_FAST);
-
-	if (chip->model.private_data == MODEL_ST_H6)
-		chip->model.dac_channels = 8;
-	data->anti_pop_delay = 100;
-	data->dacs = chip->model.private_data == MODEL_ST_H6 ? 4 : 1;
-	data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
-	data->pcm1796_oversampling = PCM1796_OS_64;
-
-	pcm1796_init(chip);
-
-	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
-			  GPIO_DX_INPUT_ROUTE | GPIO_ST_HP_REAR | GPIO_ST_HP);
-	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA,
-			    GPIO_DX_INPUT_ROUTE | GPIO_ST_HP_REAR | GPIO_ST_HP);
-
-	xonar_common_init(chip);
-
-	snd_component_add(chip->card, "PCM1792A");
-	snd_component_add(chip->card, "CS5381");
-}
-
-static void xonar_stx_init(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->ext_power_reg = OXYGEN_GPI_DATA;
-	data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
-	data->ext_power_bit = GPI_DX_EXT_POWER;
-
-	xonar_st_init(chip);
-}
-
-static void xonar_disable_output(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-
-	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
-}
-
-static void xonar_d2_cleanup(struct oxygen *chip)
-{
-	xonar_disable_output(chip);
-}
-
-static void xonar_d1_cleanup(struct oxygen *chip)
-{
-	xonar_disable_output(chip);
-	cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
-	oxygen_clear_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
-}
-
-static void xonar_hdav_cleanup(struct oxygen *chip)
-{
-	u8 param = 0;
-
-	hdmi_write_command(chip, 0x74, 1, &param);
-	xonar_disable_output(chip);
-}
-
-static void xonar_st_cleanup(struct oxygen *chip)
-{
-	xonar_disable_output(chip);
-}
-
-static void xonar_d2_suspend(struct oxygen *chip)
-{
-	xonar_d2_cleanup(chip);
-}
-
-static void xonar_d1_suspend(struct oxygen *chip)
-{
-	xonar_d1_cleanup(chip);
-}
-
-static void xonar_hdav_suspend(struct oxygen *chip)
-{
-	xonar_hdav_cleanup(chip);
-	msleep(2);
-}
-
-static void xonar_st_suspend(struct oxygen *chip)
-{
-	xonar_st_cleanup(chip);
-}
-
-static void xonar_d2_resume(struct oxygen *chip)
-{
-	pcm1796_init(chip);
-	xonar_enable_output(chip);
-}
-
-static void xonar_d1_resume(struct oxygen *chip)
-{
-	oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
-	msleep(1);
-	cs43xx_init(chip);
-	xonar_enable_output(chip);
-}
-
-static void xonar_hdav_resume(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-	u8 param;
-
-	oxygen_reset_uart(chip);
-	param = 0;
-	hdmi_write_command(chip, 0x61, 1, &param);
-	param = 1;
-	hdmi_write_command(chip, 0x74, 1, &param);
-	hdmi_write_command(chip, 0x54, 5, data->hdmi_params);
-	pcm1796_init(chip);
-	xonar_enable_output(chip);
-}
-
-static void xonar_st_resume(struct oxygen *chip)
-{
-	pcm1796_init(chip);
-	xonar_enable_output(chip);
-}
-
-static void xonar_hdav_pcm_hardware_filter(unsigned int channel,
-					   struct snd_pcm_hardware *hardware)
-{
-	if (channel == PCM_MULTICH) {
-		hardware->rates = SNDRV_PCM_RATE_44100 |
-				  SNDRV_PCM_RATE_48000 |
-				  SNDRV_PCM_RATE_96000 |
-				  SNDRV_PCM_RATE_192000;
-		hardware->rate_min = 44100;
-	}
-}
-
-static void set_pcm1796_params(struct oxygen *chip,
-			       struct snd_pcm_hw_params *params)
-{
-	struct xonar_data *data = chip->model_data;
-	unsigned int i;
-
-	data->pcm1796_oversampling =
-		params_rate(params) >= 96000 ? PCM1796_OS_32 : PCM1796_OS_64;
-	for (i = 0; i < data->dacs; ++i)
-		pcm1796_write(chip, i, 20, data->pcm1796_oversampling);
-}
-
-static void set_cs53x1_params(struct oxygen *chip,
-			      struct snd_pcm_hw_params *params)
-{
-	unsigned int value;
-
-	if (params_rate(params) <= 54000)
-		value = GPIO_CS53x1_M_SINGLE;
-	else if (params_rate(params) <= 108000)
-		value = GPIO_CS53x1_M_DOUBLE;
-	else
-		value = GPIO_CS53x1_M_QUAD;
-	oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
-			      value, GPIO_CS53x1_M_MASK);
-}
-
-static void set_cs43xx_params(struct oxygen *chip,
-			      struct snd_pcm_hw_params *params)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->cs4398_fm = CS4398_DEM_NONE | CS4398_DIF_LJUST;
-	data->cs4362a_fm = CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
-	if (params_rate(params) <= 50000) {
-		data->cs4398_fm |= CS4398_FM_SINGLE;
-		data->cs4362a_fm |= CS4362A_FM_SINGLE;
-	} else if (params_rate(params) <= 100000) {
-		data->cs4398_fm |= CS4398_FM_DOUBLE;
-		data->cs4362a_fm |= CS4362A_FM_DOUBLE;
-	} else {
-		data->cs4398_fm |= CS4398_FM_QUAD;
-		data->cs4362a_fm |= CS4362A_FM_QUAD;
-	}
-	cs4398_write(chip, 2, data->cs4398_fm);
-	cs4362a_write(chip, 0x06, data->cs4362a_fm);
-	cs4362a_write(chip, 0x09, data->cs4362a_fm);
-	cs4362a_write(chip, 0x0c, data->cs4362a_fm);
-}
-
-static void set_hdmi_params(struct oxygen *chip,
-			    struct snd_pcm_hw_params *params)
-{
-	struct xonar_data *data = chip->model_data;
-
-	data->hdmi_params[0] = 0; /* 1 = non-audio */
-	switch (params_rate(params)) {
-	case 44100:
-		data->hdmi_params[1] = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		data->hdmi_params[1] = IEC958_AES3_CON_FS_48000;
-		break;
-	default: /* 96000 */
-		data->hdmi_params[1] = IEC958_AES3_CON_FS_96000;
-		break;
-	case 192000:
-		data->hdmi_params[1] = IEC958_AES3_CON_FS_192000;
-		break;
-	}
-	data->hdmi_params[2] = params_channels(params) / 2 - 1;
-	if (params_format(params) == SNDRV_PCM_FORMAT_S16_LE)
-		data->hdmi_params[3] = 0;
-	else
-		data->hdmi_params[3] = 0xc0;
-	data->hdmi_params[4] = 1; /* ? */
-	hdmi_write_command(chip, 0x54, 5, data->hdmi_params);
-}
-
-static void set_hdav_params(struct oxygen *chip,
-			    struct snd_pcm_hw_params *params)
-{
-	set_pcm1796_params(chip, params);
-	set_hdmi_params(chip, params);
-}
-
-static void xonar_gpio_changed(struct oxygen *chip)
-{
-	struct xonar_data *data = chip->model_data;
-	u8 has_power;
-
-	has_power = !!(oxygen_read8(chip, data->ext_power_reg)
-		       & data->ext_power_bit);
-	if (has_power != data->has_power) {
-		data->has_power = has_power;
-		if (has_power) {
-			snd_printk(KERN_NOTICE "power restored\n");
-		} else {
-			snd_printk(KERN_CRIT
-				   "Hey! Don't unplug the power cable!\n");
-			/* TODO: stop PCMs */
-		}
-	}
-}
-
-static void xonar_hdav_uart_input(struct oxygen *chip)
-{
-	if (chip->uart_input_count >= 2 &&
-	    chip->uart_input[chip->uart_input_count - 2] == 'O' &&
-	    chip->uart_input[chip->uart_input_count - 1] == 'K') {
-		printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n");
-		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
-				     chip->uart_input, chip->uart_input_count);
-		chip->uart_input_count = 0;
-	}
-}
-
-static int gpio_bit_switch_get(struct snd_kcontrol *ctl,
-			       struct snd_ctl_elem_value *value)
-{
-	struct oxygen *chip = ctl->private_data;
-	u16 bit = ctl->private_value;
-
-	value->value.integer.value[0] =
-		!!(oxygen_read16(chip, OXYGEN_GPIO_DATA) & bit);
-	return 0;
-}
-
-static int gpio_bit_switch_put(struct snd_kcontrol *ctl,
-			       struct snd_ctl_elem_value *value)
-{
-	struct oxygen *chip = ctl->private_data;
-	u16 bit = ctl->private_value;
-	u16 old_bits, new_bits;
-	int changed;
-
-	spin_lock_irq(&chip->reg_lock);
-	old_bits = oxygen_read16(chip, OXYGEN_GPIO_DATA);
-	if (value->value.integer.value[0])
-		new_bits = old_bits | bit;
-	else
-		new_bits = old_bits & ~bit;
-	changed = new_bits != old_bits;
-	if (changed)
-		oxygen_write16(chip, OXYGEN_GPIO_DATA, new_bits);
-	spin_unlock_irq(&chip->reg_lock);
-	return changed;
-}
-
-static const struct snd_kcontrol_new alt_switch = {
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "Analog Loopback Switch",
-	.info = snd_ctl_boolean_mono_info,
-	.get = gpio_bit_switch_get,
-	.put = gpio_bit_switch_put,
-	.private_value = GPIO_D2_ALT,
-};
-
-static const struct snd_kcontrol_new front_panel_switch = {
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "Front Panel Switch",
-	.info = snd_ctl_boolean_mono_info,
-	.get = gpio_bit_switch_get,
-	.put = gpio_bit_switch_put,
-	.private_value = GPIO_DX_FRONT_PANEL,
-};
-
-static int st_output_switch_info(struct snd_kcontrol *ctl,
-				 struct snd_ctl_elem_info *info)
-{
-	static const char *const names[3] = {
-		"Speakers", "Headphones", "FP Headphones"
-	};
-
-	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-	info->count = 1;
-	info->value.enumerated.items = 3;
-	if (info->value.enumerated.item >= 3)
-		info->value.enumerated.item = 2;
-	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
-	return 0;
-}
-
-static int st_output_switch_get(struct snd_kcontrol *ctl,
-				struct snd_ctl_elem_value *value)
-{
-	struct oxygen *chip = ctl->private_data;
-	u16 gpio;
-
-	gpio = oxygen_read16(chip, OXYGEN_GPIO_DATA);
-	if (!(gpio & GPIO_ST_HP))
-		value->value.enumerated.item[0] = 0;
-	else if (gpio & GPIO_ST_HP_REAR)
-		value->value.enumerated.item[0] = 1;
-	else
-		value->value.enumerated.item[0] = 2;
-	return 0;
-}
-
-
-static int st_output_switch_put(struct snd_kcontrol *ctl,
-				struct snd_ctl_elem_value *value)
-{
-	struct oxygen *chip = ctl->private_data;
-	u16 gpio_old, gpio;
-
-	mutex_lock(&chip->mutex);
-	gpio_old = oxygen_read16(chip, OXYGEN_GPIO_DATA);
-	gpio = gpio_old;
-	switch (value->value.enumerated.item[0]) {
-	case 0:
-		gpio &= ~(GPIO_ST_HP | GPIO_ST_HP_REAR);
-		break;
-	case 1:
-		gpio |= GPIO_ST_HP | GPIO_ST_HP_REAR;
-		break;
-	case 2:
-		gpio = (gpio | GPIO_ST_HP) & ~GPIO_ST_HP_REAR;
-		break;
-	}
-	oxygen_write16(chip, OXYGEN_GPIO_DATA, gpio);
-	mutex_unlock(&chip->mutex);
-	return gpio != gpio_old;
-}
-
-static const struct snd_kcontrol_new st_output_switch = {
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "Analog Output",
-	.info = st_output_switch_info,
-	.get = st_output_switch_get,
-	.put = st_output_switch_put,
-};
-
-static void xonar_line_mic_ac97_switch(struct oxygen *chip,
-				       unsigned int reg, unsigned int mute)
-{
-	if (reg == AC97_LINE) {
-		spin_lock_irq(&chip->reg_lock);
-		oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
-				      mute ? GPIO_DX_INPUT_ROUTE : 0,
-				      GPIO_DX_INPUT_ROUTE);
-		spin_unlock_irq(&chip->reg_lock);
-	}
-}
-
-static const DECLARE_TLV_DB_SCALE(pcm1796_db_scale, -6000, 50, 0);
-static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -6000, 100, 0);
-
-static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
-{
-	if (!strncmp(template->name, "CD Capture ", 11))
-		/* CD in is actually connected to the video in pin */
-		template->private_value ^= AC97_CD ^ AC97_VIDEO;
-	return 0;
-}
-
-static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
-{
-	if (!strncmp(template->name, "CD Capture ", 11))
-		return 1; /* no CD input */
-	return 0;
-}
-
-static int xonar_st_control_filter(struct snd_kcontrol_new *template)
-{
-	if (!strncmp(template->name, "CD Capture ", 11))
-		return 1; /* no CD input */
-	if (!strcmp(template->name, "Stereo Upmixing"))
-		return 1; /* stereo only - we don't need upmixing */
-	return 0;
-}
-
-static int xonar_d2_mixer_init(struct oxygen *chip)
-{
-	return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
-}
-
-static int xonar_d1_mixer_init(struct oxygen *chip)
-{
-	return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
-}
-
-static int xonar_st_mixer_init(struct oxygen *chip)
-{
-	return snd_ctl_add(chip->card, snd_ctl_new1(&st_output_switch, chip));
-}
-
-static const struct oxygen_model model_xonar_d2 = {
-	.longname = "Asus Virtuoso 200",
-	.chip = "AV200",
-	.init = xonar_d2_init,
-	.control_filter = xonar_d2_control_filter,
-	.mixer_init = xonar_d2_mixer_init,
-	.cleanup = xonar_d2_cleanup,
-	.suspend = xonar_d2_suspend,
-	.resume = xonar_d2_resume,
-	.set_dac_params = set_pcm1796_params,
-	.set_adc_params = set_cs53x1_params,
-	.update_dac_volume = update_pcm1796_volume,
-	.update_dac_mute = update_pcm1796_mute,
-	.dac_tlv = pcm1796_db_scale,
-	.model_data_size = sizeof(struct xonar_data),
-	.device_config = PLAYBACK_0_TO_I2S |
-			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2 |
-			 CAPTURE_1_FROM_SPDIF |
-			 MIDI_OUTPUT |
-			 MIDI_INPUT,
-	.dac_channels = 8,
-	.dac_volume_min = 255 - 2*60,
-	.dac_volume_max = 255,
-	.misc_flags = OXYGEN_MISC_MIDI,
-	.function_flags = OXYGEN_FUNCTION_SPI |
-			  OXYGEN_FUNCTION_ENABLE_SPI_4_5,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-};
-
-static const struct oxygen_model model_xonar_d1 = {
-	.longname = "Asus Virtuoso 100",
-	.chip = "AV200",
-	.init = xonar_d1_init,
-	.control_filter = xonar_d1_control_filter,
-	.mixer_init = xonar_d1_mixer_init,
-	.cleanup = xonar_d1_cleanup,
-	.suspend = xonar_d1_suspend,
-	.resume = xonar_d1_resume,
-	.set_dac_params = set_cs43xx_params,
-	.set_adc_params = set_cs53x1_params,
-	.update_dac_volume = update_cs43xx_volume,
-	.update_dac_mute = update_cs43xx_mute,
-	.ac97_switch = xonar_line_mic_ac97_switch,
-	.dac_tlv = cs4362a_db_scale,
-	.model_data_size = sizeof(struct xonar_data),
-	.device_config = PLAYBACK_0_TO_I2S |
-			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2,
-	.dac_channels = 8,
-	.dac_volume_min = 127 - 60,
-	.dac_volume_max = 127,
-	.function_flags = OXYGEN_FUNCTION_2WIRE,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-};
-
-static const struct oxygen_model model_xonar_hdav = {
-	.longname = "Asus Virtuoso 200",
-	.chip = "AV200",
-	.init = xonar_hdav_init,
-	.cleanup = xonar_hdav_cleanup,
-	.suspend = xonar_hdav_suspend,
-	.resume = xonar_hdav_resume,
-	.pcm_hardware_filter = xonar_hdav_pcm_hardware_filter,
-	.set_dac_params = set_hdav_params,
-	.set_adc_params = set_cs53x1_params,
-	.update_dac_volume = update_pcm1796_volume,
-	.update_dac_mute = update_pcm1796_mute,
-	.uart_input = xonar_hdav_uart_input,
-	.ac97_switch = xonar_line_mic_ac97_switch,
-	.dac_tlv = pcm1796_db_scale,
-	.model_data_size = sizeof(struct xonar_data),
-	.device_config = PLAYBACK_0_TO_I2S |
-			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2 |
-			 CAPTURE_1_FROM_SPDIF,
-	.dac_channels = 8,
-	.dac_volume_min = 255 - 2*60,
-	.dac_volume_max = 255,
-	.misc_flags = OXYGEN_MISC_MIDI,
-	.function_flags = OXYGEN_FUNCTION_2WIRE,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-};
-
-static const struct oxygen_model model_xonar_st = {
-	.longname = "Asus Virtuoso 100",
-	.chip = "AV200",
-	.init = xonar_st_init,
-	.control_filter = xonar_st_control_filter,
-	.mixer_init = xonar_st_mixer_init,
-	.cleanup = xonar_st_cleanup,
-	.suspend = xonar_st_suspend,
-	.resume = xonar_st_resume,
-	.set_dac_params = set_pcm1796_params,
-	.set_adc_params = set_cs53x1_params,
-	.update_dac_volume = update_pcm1796_volume,
-	.update_dac_mute = update_pcm1796_mute,
-	.ac97_switch = xonar_line_mic_ac97_switch,
-	.dac_tlv = pcm1796_db_scale,
-	.model_data_size = sizeof(struct xonar_data),
-	.device_config = PLAYBACK_0_TO_I2S |
-			 PLAYBACK_1_TO_SPDIF |
-			 CAPTURE_0_FROM_I2S_2,
-	.dac_channels = 2,
-	.dac_volume_min = 255 - 2*60,
-	.dac_volume_max = 255,
-	.function_flags = OXYGEN_FUNCTION_2WIRE,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
-};
-
 static int __devinit get_xonar_model(struct oxygen *chip,
 				     const struct pci_device_id *id)
 {
-	static const struct oxygen_model *const models[] = {
-		[MODEL_D1]	= &model_xonar_d1,
-		[MODEL_DX]	= &model_xonar_d1,
-		[MODEL_D2]	= &model_xonar_d2,
-		[MODEL_D2X]	= &model_xonar_d2,
-		[MODEL_HDAV]	= &model_xonar_hdav,
-		[MODEL_ST]	= &model_xonar_st,
-		[MODEL_STX]	= &model_xonar_st,
-	};
-	static const char *const names[] = {
-		[MODEL_D1]	= "Xonar D1",
-		[MODEL_DX]	= "Xonar DX",
-		[MODEL_D2]	= "Xonar D2",
-		[MODEL_D2X]	= "Xonar D2X",
-		[MODEL_HDAV]	= "Xonar HDAV1.3",
-		[MODEL_HDAV_H6]	= "Xonar HDAV1.3+H6",
-		[MODEL_ST]	= "Xonar Essence ST",
-		[MODEL_ST_H6]	= "Xonar Essence ST+H6",
-		[MODEL_STX]	= "Xonar Essence STX",
-	};
-	unsigned int model = id->driver_data;
-
-	if (model >= ARRAY_SIZE(models) || !models[model])
-		return -EINVAL;
-	chip->model = *models[model];
-
-	switch (model) {
-	case MODEL_D2X:
-		chip->model.init = xonar_d2x_init;
-		break;
-	case MODEL_DX:
-		chip->model.init = xonar_dx_init;
-		break;
-	case MODEL_HDAV:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
-		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
-		case GPIO_DB_H6:
-			model = MODEL_HDAV_H6;
-			break;
-		case GPIO_DB_XX:
-			snd_printk(KERN_ERR "unknown daughterboard\n");
-			return -ENODEV;
-		}
-		break;
-	case MODEL_ST:
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
-		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
-		case GPIO_DB_H6:
-			model = MODEL_ST_H6;
-			break;
-		}
-		break;
-	case MODEL_STX:
-		chip->model.init = xonar_stx_init;
-		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
-		break;
-	}
-
-	chip->model.shortname = names[model];
-	chip->model.private_data = model;
-	return 0;
+	if (get_xonar_pcm179x_model(chip, id) >= 0)
+		return 0;
+	if (get_xonar_cs43xx_model(chip, id) >= 0)
+		return 0;
+	return -EINVAL;
 }
 
 static int __devinit xonar_probe(struct pci_dev *pci,
diff --git a/sound/pci/oxygen/xonar.h b/sound/pci/oxygen/xonar.h
new file mode 100644
index 0000000..89b3ed8
--- /dev/null
+++ b/sound/pci/oxygen/xonar.h
@@ -0,0 +1,50 @@
+#ifndef XONAR_H_INCLUDED
+#define XONAR_H_INCLUDED
+
+#include "oxygen.h"
+
+struct xonar_generic {
+	unsigned int anti_pop_delay;
+	u16 output_enable_bit;
+	u8 ext_power_reg;
+	u8 ext_power_int_reg;
+	u8 ext_power_bit;
+	u8 has_power;
+};
+
+struct xonar_hdmi {
+	u8 params[5];
+};
+
+/* generic helper functions */
+
+void xonar_enable_output(struct oxygen *chip);
+void xonar_disable_output(struct oxygen *chip);
+void xonar_init_ext_power(struct oxygen *chip);
+void xonar_init_cs53x1(struct oxygen *chip);
+void xonar_set_cs53x1_params(struct oxygen *chip,
+			     struct snd_pcm_hw_params *params);
+int xonar_gpio_bit_switch_get(struct snd_kcontrol *ctl,
+			      struct snd_ctl_elem_value *value);
+int xonar_gpio_bit_switch_put(struct snd_kcontrol *ctl,
+			      struct snd_ctl_elem_value *value);
+
+/* model-specific card drivers */
+
+int get_xonar_pcm179x_model(struct oxygen *chip,
+			    const struct pci_device_id *id);
+int get_xonar_cs43xx_model(struct oxygen *chip,
+			   const struct pci_device_id *id);
+
+/* HDMI helper functions */
+
+void xonar_hdmi_init(struct oxygen *chip, struct xonar_hdmi *data);
+void xonar_hdmi_cleanup(struct oxygen *chip);
+void xonar_hdmi_resume(struct oxygen *chip, struct xonar_hdmi *hdmi);
+void xonar_hdmi_pcm_hardware_filter(unsigned int channel,
+				    struct snd_pcm_hardware *hardware);
+void xonar_set_hdmi_params(struct oxygen *chip, struct xonar_hdmi *hdmi,
+			   struct snd_pcm_hw_params *params);
+void xonar_hdmi_uart_input(struct oxygen *chip);
+
+#endif
diff --git a/sound/pci/oxygen/xonar_cs43xx.c b/sound/pci/oxygen/xonar_cs43xx.c
new file mode 100644
index 0000000..16c226b
--- /dev/null
+++ b/sound/pci/oxygen/xonar_cs43xx.c
@@ -0,0 +1,434 @@
+/*
+ * card driver for models with CS4398/CS4362A DACs (Xonar D1/DX)
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License, version 2.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Xonar D1/DX
+ * -----------
+ *
+ * CMI8788:
+ *
+ * I²C <-> CS4398 (front)
+ *     <-> CS4362A (surround, center/LFE, back)
+ *
+ * GPI 0 <- external power present (DX only)
+ *
+ * GPIO 0 -> enable output to speakers
+ * GPIO 1 -> enable front panel I/O
+ * GPIO 2 -> M0 of CS5361
+ * GPIO 3 -> M1 of CS5361
+ * GPIO 8 -> route input jack to line-in (0) or mic-in (1)
+ *
+ * CS4398:
+ *
+ * AD0 <- 1
+ * AD1 <- 1
+ *
+ * CS4362A:
+ *
+ * AD0 <- 0
+ *
+ * CM9780:
+ *
+ * GPO 0 -> route line-in (0) or AC97 output (1) to CS5361 input
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <sound/ac97_codec.h>
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include "xonar.h"
+#include "cs4398.h"
+#include "cs4362a.h"
+
+#define GPI_EXT_POWER		0x01
+#define GPIO_D1_OUTPUT_ENABLE	0x0001
+#define GPIO_D1_FRONT_PANEL	0x0002
+#define GPIO_D1_INPUT_ROUTE	0x0100
+
+#define I2C_DEVICE_CS4398	0x9e	/* 10011, AD1=1, AD0=1, /W=0 */
+#define I2C_DEVICE_CS4362A	0x30	/* 001100, AD0=0, /W=0 */
+
+struct xonar_cs43xx {
+	struct xonar_generic generic;
+	u8 cs4398_regs[8];
+	u8 cs4362a_regs[15];
+};
+
+static void cs4398_write(struct oxygen *chip, u8 reg, u8 value)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+
+	oxygen_write_i2c(chip, I2C_DEVICE_CS4398, reg, value);
+	if (reg < ARRAY_SIZE(data->cs4398_regs))
+		data->cs4398_regs[reg] = value;
+}
+
+static void cs4398_write_cached(struct oxygen *chip, u8 reg, u8 value)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+
+	if (value != data->cs4398_regs[reg])
+		cs4398_write(chip, reg, value);
+}
+
+static void cs4362a_write(struct oxygen *chip, u8 reg, u8 value)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+
+	oxygen_write_i2c(chip, I2C_DEVICE_CS4362A, reg, value);
+	if (reg < ARRAY_SIZE(data->cs4362a_regs))
+		data->cs4362a_regs[reg] = value;
+}
+
+static void cs4362a_write_cached(struct oxygen *chip, u8 reg, u8 value)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+
+	if (value != data->cs4362a_regs[reg])
+		cs4362a_write(chip, reg, value);
+}
+
+static void cs43xx_registers_init(struct oxygen *chip)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+	unsigned int i;
+
+	/* set CPEN (control port mode) and power down */
+	cs4398_write(chip, 8, CS4398_CPEN | CS4398_PDN);
+	cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
+	/* configure */
+	cs4398_write(chip, 2, data->cs4398_regs[2]);
+	cs4398_write(chip, 3, CS4398_ATAPI_B_R | CS4398_ATAPI_A_L);
+	cs4398_write(chip, 4, data->cs4398_regs[4]);
+	cs4398_write(chip, 5, data->cs4398_regs[5]);
+	cs4398_write(chip, 6, data->cs4398_regs[6]);
+	cs4398_write(chip, 7, data->cs4398_regs[7]);
+	cs4362a_write(chip, 0x02, CS4362A_DIF_LJUST);
+	cs4362a_write(chip, 0x03, CS4362A_MUTEC_6 | CS4362A_AMUTE |
+		      CS4362A_RMP_UP | CS4362A_ZERO_CROSS | CS4362A_SOFT_RAMP);
+	cs4362a_write(chip, 0x04, data->cs4362a_regs[0x04]);
+	cs4362a_write(chip, 0x05, 0);
+	for (i = 6; i <= 14; ++i)
+		cs4362a_write(chip, i, data->cs4362a_regs[i]);
+	/* clear power down */
+	cs4398_write(chip, 8, CS4398_CPEN);
+	cs4362a_write(chip, 0x01, CS4362A_CPEN);
+}
+
+static void xonar_d1_init(struct oxygen *chip)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+
+	data->generic.anti_pop_delay = 800;
+	data->generic.output_enable_bit = GPIO_D1_OUTPUT_ENABLE;
+	data->cs4398_regs[2] =
+		CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
+	data->cs4398_regs[4] = CS4398_MUTEP_LOW |
+		CS4398_MUTE_B | CS4398_MUTE_A | CS4398_PAMUTE;
+	data->cs4398_regs[5] = 60 * 2;
+	data->cs4398_regs[6] = 60 * 2;
+	data->cs4398_regs[7] = CS4398_RMP_DN | CS4398_RMP_UP |
+		CS4398_ZERO_CROSS | CS4398_SOFT_RAMP;
+	data->cs4362a_regs[4] = CS4362A_RMP_DN | CS4362A_DEM_NONE;
+	data->cs4362a_regs[6] = CS4362A_FM_SINGLE |
+		CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
+	data->cs4362a_regs[7] = 60 | CS4362A_MUTE;
+	data->cs4362a_regs[8] = 60 | CS4362A_MUTE;
+	data->cs4362a_regs[9] = data->cs4362a_regs[6];
+	data->cs4362a_regs[10] = 60 | CS4362A_MUTE;
+	data->cs4362a_regs[11] = 60 | CS4362A_MUTE;
+	data->cs4362a_regs[12] = data->cs4362a_regs[6];
+	data->cs4362a_regs[13] = 60 | CS4362A_MUTE;
+	data->cs4362a_regs[14] = 60 | CS4362A_MUTE;
+
+	oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
+		       OXYGEN_2WIRE_LENGTH_8 |
+		       OXYGEN_2WIRE_INTERRUPT_MASK |
+		       OXYGEN_2WIRE_SPEED_FAST);
+
+	cs43xx_registers_init(chip);
+
+	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
+			  GPIO_D1_FRONT_PANEL | GPIO_D1_INPUT_ROUTE);
+	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA,
+			    GPIO_D1_FRONT_PANEL | GPIO_D1_INPUT_ROUTE);
+
+	xonar_init_cs53x1(chip);
+	xonar_enable_output(chip);
+
+	snd_component_add(chip->card, "CS4398");
+	snd_component_add(chip->card, "CS4362A");
+	snd_component_add(chip->card, "CS5361");
+}
+
+static void xonar_dx_init(struct oxygen *chip)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+
+	data->generic.ext_power_reg = OXYGEN_GPI_DATA;
+	data->generic.ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->generic.ext_power_bit = GPI_EXT_POWER;
+	xonar_init_ext_power(chip);
+	xonar_d1_init(chip);
+}
+
+static void xonar_d1_cleanup(struct oxygen *chip)
+{
+	xonar_disable_output(chip);
+	cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
+	oxygen_clear_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
+}
+
+static void xonar_d1_suspend(struct oxygen *chip)
+{
+	xonar_d1_cleanup(chip);
+}
+
+static void xonar_d1_resume(struct oxygen *chip)
+{
+	oxygen_set_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC);
+	msleep(1);
+	cs43xx_registers_init(chip);
+	xonar_enable_output(chip);
+}
+
+static void set_cs43xx_params(struct oxygen *chip,
+			      struct snd_pcm_hw_params *params)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+	u8 cs4398_fm, cs4362a_fm;
+
+	if (params_rate(params) <= 50000) {
+		cs4398_fm = CS4398_FM_SINGLE;
+		cs4362a_fm = CS4362A_FM_SINGLE;
+	} else if (params_rate(params) <= 100000) {
+		cs4398_fm = CS4398_FM_DOUBLE;
+		cs4362a_fm = CS4362A_FM_DOUBLE;
+	} else {
+		cs4398_fm = CS4398_FM_QUAD;
+		cs4362a_fm = CS4362A_FM_QUAD;
+	}
+	cs4398_fm |= CS4398_DEM_NONE | CS4398_DIF_LJUST;
+	cs4398_write_cached(chip, 2, cs4398_fm);
+	cs4362a_fm |= data->cs4362a_regs[6] & ~CS4362A_FM_MASK;
+	cs4362a_write_cached(chip, 6, cs4362a_fm);
+	cs4362a_write_cached(chip, 12, cs4362a_fm);
+	cs4362a_fm &= CS4362A_FM_MASK;
+	cs4362a_fm |= data->cs4362a_regs[9] & ~CS4362A_FM_MASK;
+	cs4362a_write_cached(chip, 9, cs4362a_fm);
+}
+
+static void update_cs4362a_volumes(struct oxygen *chip)
+{
+	unsigned int i;
+	u8 mute;
+
+	mute = chip->dac_mute ? CS4362A_MUTE : 0;
+	for (i = 0; i < 6; ++i)
+		cs4362a_write_cached(chip, 7 + i + i / 2,
+				     (127 - chip->dac_volume[2 + i]) | mute);
+}
+
+static void update_cs43xx_volume(struct oxygen *chip)
+{
+	cs4398_write_cached(chip, 5, (127 - chip->dac_volume[0]) * 2);
+	cs4398_write_cached(chip, 6, (127 - chip->dac_volume[1]) * 2);
+	update_cs4362a_volumes(chip);
+}
+
+static void update_cs43xx_mute(struct oxygen *chip)
+{
+	u8 reg;
+
+	reg = CS4398_MUTEP_LOW | CS4398_PAMUTE;
+	if (chip->dac_mute)
+		reg |= CS4398_MUTE_B | CS4398_MUTE_A;
+	cs4398_write_cached(chip, 4, reg);
+	update_cs4362a_volumes(chip);
+}
+
+static void update_cs43xx_center_lfe_mix(struct oxygen *chip, bool mixed)
+{
+	struct xonar_cs43xx *data = chip->model_data;
+	u8 reg;
+
+	reg = data->cs4362a_regs[9] & ~CS4362A_ATAPI_MASK;
+	if (mixed)
+		reg |= CS4362A_ATAPI_B_LR | CS4362A_ATAPI_A_LR;
+	else
+		reg |= CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
+	cs4362a_write_cached(chip, 9, reg);
+}
+
+static const struct snd_kcontrol_new front_panel_switch = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Front Panel Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = xonar_gpio_bit_switch_get,
+	.put = xonar_gpio_bit_switch_put,
+	.private_value = GPIO_D1_FRONT_PANEL,
+};
+
+static int rolloff_info(struct snd_kcontrol *ctl,
+			struct snd_ctl_elem_info *info)
+{
+	static const char *const names[2] = {
+		"Fast Roll-off", "Slow Roll-off"
+	};
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 2;
+	if (info->value.enumerated.item >= 2)
+		info->value.enumerated.item = 1;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int rolloff_get(struct snd_kcontrol *ctl,
+		       struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_cs43xx *data = chip->model_data;
+
+	value->value.enumerated.item[0] =
+		(data->cs4398_regs[7] & CS4398_FILT_SEL) != 0;
+	return 0;
+}
+
+static int rolloff_put(struct snd_kcontrol *ctl,
+		       struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_cs43xx *data = chip->model_data;
+	int changed;
+	u8 reg;
+
+	mutex_lock(&chip->mutex);
+	reg = data->cs4398_regs[7];
+	if (value->value.enumerated.item[0])
+		reg |= CS4398_FILT_SEL;
+	else
+		reg &= ~CS4398_FILT_SEL;
+	changed = reg != data->cs4398_regs[7];
+	if (changed) {
+		cs4398_write(chip, 7, reg);
+		if (reg & CS4398_FILT_SEL)
+			reg = data->cs4362a_regs[0x04] | CS4362A_FILT_SEL;
+		else
+			reg = data->cs4362a_regs[0x04] & ~CS4362A_FILT_SEL;
+		cs4362a_write(chip, 0x04, reg);
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+static const struct snd_kcontrol_new rolloff_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DAC Filter Playback Enum",
+	.info = rolloff_info,
+	.get = rolloff_get,
+	.put = rolloff_put,
+};
+
+static void xonar_d1_line_mic_ac97_switch(struct oxygen *chip,
+					  unsigned int reg, unsigned int mute)
+{
+	if (reg == AC97_LINE) {
+		spin_lock_irq(&chip->reg_lock);
+		oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
+				      mute ? GPIO_D1_INPUT_ROUTE : 0,
+				      GPIO_D1_INPUT_ROUTE);
+		spin_unlock_irq(&chip->reg_lock);
+	}
+}
+
+static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -6000, 100, 0);
+
+static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
+{
+	if (!strncmp(template->name, "CD Capture ", 11))
+		return 1; /* no CD input */
+	return 0;
+}
+
+static int xonar_d1_mixer_init(struct oxygen *chip)
+{
+	int err;
+
+	err = snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
+	if (err < 0)
+		return err;
+	err = snd_ctl_add(chip->card, snd_ctl_new1(&rolloff_control, chip));
+	if (err < 0)
+		return err;
+	return 0;
+}
+
+static const struct oxygen_model model_xonar_d1 = {
+	.longname = "Asus Virtuoso 100",
+	.chip = "AV200",
+	.init = xonar_d1_init,
+	.control_filter = xonar_d1_control_filter,
+	.mixer_init = xonar_d1_mixer_init,
+	.cleanup = xonar_d1_cleanup,
+	.suspend = xonar_d1_suspend,
+	.resume = xonar_d1_resume,
+	.get_i2s_mclk = oxygen_default_i2s_mclk,
+	.set_dac_params = set_cs43xx_params,
+	.set_adc_params = xonar_set_cs53x1_params,
+	.update_dac_volume = update_cs43xx_volume,
+	.update_dac_mute = update_cs43xx_mute,
+	.update_center_lfe_mix = update_cs43xx_center_lfe_mix,
+	.ac97_switch = xonar_d1_line_mic_ac97_switch,
+	.dac_tlv = cs4362a_db_scale,
+	.model_data_size = sizeof(struct xonar_cs43xx),
+	.device_config = PLAYBACK_0_TO_I2S |
+			 PLAYBACK_1_TO_SPDIF |
+			 CAPTURE_0_FROM_I2S_2,
+	.dac_channels = 8,
+	.dac_volume_min = 127 - 60,
+	.dac_volume_max = 127,
+	.function_flags = OXYGEN_FUNCTION_2WIRE,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+};
+
+int __devinit get_xonar_cs43xx_model(struct oxygen *chip,
+				     const struct pci_device_id *id)
+{
+	switch (id->subdevice) {
+	case 0x834f:
+		chip->model = model_xonar_d1;
+		chip->model.shortname = "Xonar D1";
+		break;
+	case 0x8275:
+	case 0x8327:
+		chip->model = model_xonar_d1;
+		chip->model.shortname = "Xonar DX";
+		chip->model.init = xonar_dx_init;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
diff --git a/sound/pci/oxygen/xonar_hdmi.c b/sound/pci/oxygen/xonar_hdmi.c
new file mode 100644
index 0000000..b12db1f
--- /dev/null
+++ b/sound/pci/oxygen/xonar_hdmi.c
@@ -0,0 +1,128 @@
+/*
+ * helper functions for HDMI models (Xonar HDAV1.3)
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License, version 2.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <sound/asoundef.h>
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include "xonar.h"
+
+static void hdmi_write_command(struct oxygen *chip, u8 command,
+			       unsigned int count, const u8 *params)
+{
+	unsigned int i;
+	u8 checksum;
+
+	oxygen_write_uart(chip, 0xfb);
+	oxygen_write_uart(chip, 0xef);
+	oxygen_write_uart(chip, command);
+	oxygen_write_uart(chip, count);
+	for (i = 0; i < count; ++i)
+		oxygen_write_uart(chip, params[i]);
+	checksum = 0xfb + 0xef + command + count;
+	for (i = 0; i < count; ++i)
+		checksum += params[i];
+	oxygen_write_uart(chip, checksum);
+}
+
+static void xonar_hdmi_init_commands(struct oxygen *chip,
+				     struct xonar_hdmi *hdmi)
+{
+	u8 param;
+
+	oxygen_reset_uart(chip);
+	param = 0;
+	hdmi_write_command(chip, 0x61, 1, &param);
+	param = 1;
+	hdmi_write_command(chip, 0x74, 1, &param);
+	hdmi_write_command(chip, 0x54, 5, hdmi->params);
+}
+
+void xonar_hdmi_init(struct oxygen *chip, struct xonar_hdmi *hdmi)
+{
+	hdmi->params[1] = IEC958_AES3_CON_FS_48000;
+	hdmi->params[4] = 1;
+	xonar_hdmi_init_commands(chip, hdmi);
+}
+
+void xonar_hdmi_cleanup(struct oxygen *chip)
+{
+	u8 param = 0;
+
+	hdmi_write_command(chip, 0x74, 1, &param);
+}
+
+void xonar_hdmi_resume(struct oxygen *chip, struct xonar_hdmi *hdmi)
+{
+	xonar_hdmi_init_commands(chip, hdmi);
+}
+
+void xonar_hdmi_pcm_hardware_filter(unsigned int channel,
+				    struct snd_pcm_hardware *hardware)
+{
+	if (channel == PCM_MULTICH) {
+		hardware->rates = SNDRV_PCM_RATE_44100 |
+				  SNDRV_PCM_RATE_48000 |
+				  SNDRV_PCM_RATE_96000 |
+				  SNDRV_PCM_RATE_192000;
+		hardware->rate_min = 44100;
+	}
+}
+
+void xonar_set_hdmi_params(struct oxygen *chip, struct xonar_hdmi *hdmi,
+			   struct snd_pcm_hw_params *params)
+{
+	hdmi->params[0] = 0; /* 1 = non-audio */
+	switch (params_rate(params)) {
+	case 44100:
+		hdmi->params[1] = IEC958_AES3_CON_FS_44100;
+		break;
+	case 48000:
+		hdmi->params[1] = IEC958_AES3_CON_FS_48000;
+		break;
+	default: /* 96000 */
+		hdmi->params[1] = IEC958_AES3_CON_FS_96000;
+		break;
+	case 192000:
+		hdmi->params[1] = IEC958_AES3_CON_FS_192000;
+		break;
+	}
+	hdmi->params[2] = params_channels(params) / 2 - 1;
+	if (params_format(params) == SNDRV_PCM_FORMAT_S16_LE)
+		hdmi->params[3] = 0;
+	else
+		hdmi->params[3] = 0xc0;
+	hdmi->params[4] = 1; /* ? */
+	hdmi_write_command(chip, 0x54, 5, hdmi->params);
+}
+
+void xonar_hdmi_uart_input(struct oxygen *chip)
+{
+	if (chip->uart_input_count >= 2 &&
+	    chip->uart_input[chip->uart_input_count - 2] == 'O' &&
+	    chip->uart_input[chip->uart_input_count - 1] == 'K') {
+		printk(KERN_DEBUG "message from HDMI chip received:\n");
+		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET,
+				     chip->uart_input, chip->uart_input_count);
+		chip->uart_input_count = 0;
+	}
+}
diff --git a/sound/pci/oxygen/xonar_lib.c b/sound/pci/oxygen/xonar_lib.c
new file mode 100644
index 0000000..b3ff713
--- /dev/null
+++ b/sound/pci/oxygen/xonar_lib.c
@@ -0,0 +1,132 @@
+/*
+ * helper functions for Asus Xonar cards
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License, version 2.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/delay.h>
+#include <sound/core.h>
+#include <sound/control.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include "xonar.h"
+
+
+#define GPIO_CS53x1_M_MASK	0x000c
+#define GPIO_CS53x1_M_SINGLE	0x0000
+#define GPIO_CS53x1_M_DOUBLE	0x0004
+#define GPIO_CS53x1_M_QUAD	0x0008
+
+
+void xonar_enable_output(struct oxygen *chip)
+{
+	struct xonar_generic *data = chip->model_data;
+
+	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, data->output_enable_bit);
+	msleep(data->anti_pop_delay);
+	oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
+}
+
+void xonar_disable_output(struct oxygen *chip)
+{
+	struct xonar_generic *data = chip->model_data;
+
+	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
+}
+
+static void xonar_ext_power_gpio_changed(struct oxygen *chip)
+{
+	struct xonar_generic *data = chip->model_data;
+	u8 has_power;
+
+	has_power = !!(oxygen_read8(chip, data->ext_power_reg)
+		       & data->ext_power_bit);
+	if (has_power != data->has_power) {
+		data->has_power = has_power;
+		if (has_power) {
+			snd_printk(KERN_NOTICE "power restored\n");
+		} else {
+			snd_printk(KERN_CRIT
+				   "Hey! Don't unplug the power cable!\n");
+			/* TODO: stop PCMs */
+		}
+	}
+}
+
+void xonar_init_ext_power(struct oxygen *chip)
+{
+	struct xonar_generic *data = chip->model_data;
+
+	oxygen_set_bits8(chip, data->ext_power_int_reg,
+			 data->ext_power_bit);
+	chip->interrupt_mask |= OXYGEN_INT_GPIO;
+	chip->model.gpio_changed = xonar_ext_power_gpio_changed;
+	data->has_power = !!(oxygen_read8(chip, data->ext_power_reg)
+			     & data->ext_power_bit);
+}
+
+void xonar_init_cs53x1(struct oxygen *chip)
+{
+	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_CS53x1_M_MASK);
+	oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
+			      GPIO_CS53x1_M_SINGLE, GPIO_CS53x1_M_MASK);
+}
+
+void xonar_set_cs53x1_params(struct oxygen *chip,
+			     struct snd_pcm_hw_params *params)
+{
+	unsigned int value;
+
+	if (params_rate(params) <= 54000)
+		value = GPIO_CS53x1_M_SINGLE;
+	else if (params_rate(params) <= 108000)
+		value = GPIO_CS53x1_M_DOUBLE;
+	else
+		value = GPIO_CS53x1_M_QUAD;
+	oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
+			      value, GPIO_CS53x1_M_MASK);
+}
+
+int xonar_gpio_bit_switch_get(struct snd_kcontrol *ctl,
+			      struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	u16 bit = ctl->private_value;
+
+	value->value.integer.value[0] =
+		!!(oxygen_read16(chip, OXYGEN_GPIO_DATA) & bit);
+	return 0;
+}
+
+int xonar_gpio_bit_switch_put(struct snd_kcontrol *ctl,
+			      struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	u16 bit = ctl->private_value;
+	u16 old_bits, new_bits;
+	int changed;
+
+	spin_lock_irq(&chip->reg_lock);
+	old_bits = oxygen_read16(chip, OXYGEN_GPIO_DATA);
+	if (value->value.integer.value[0])
+		new_bits = old_bits | bit;
+	else
+		new_bits = old_bits & ~bit;
+	changed = new_bits != old_bits;
+	if (changed)
+		oxygen_write16(chip, OXYGEN_GPIO_DATA, new_bits);
+	spin_unlock_irq(&chip->reg_lock);
+	return changed;
+}
diff --git a/sound/pci/oxygen/xonar_pcm179x.c b/sound/pci/oxygen/xonar_pcm179x.c
new file mode 100644
index 0000000..ba18fb5
--- /dev/null
+++ b/sound/pci/oxygen/xonar_pcm179x.c
@@ -0,0 +1,1115 @@
+/*
+ * card driver for models with PCM1796 DACs (Xonar D2/D2X/HDAV1.3/ST/STX)
+ *
+ * Copyright (c) Clemens Ladisch <clemens@ladisch.de>
+ *
+ *
+ *  This driver is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License, version 2.
+ *
+ *  This driver is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this driver; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * Xonar D2/D2X
+ * ------------
+ *
+ * CMI8788:
+ *
+ * SPI 0 -> 1st PCM1796 (front)
+ * SPI 1 -> 2nd PCM1796 (surround)
+ * SPI 2 -> 3rd PCM1796 (center/LFE)
+ * SPI 4 -> 4th PCM1796 (back)
+ *
+ * GPIO 2 -> M0 of CS5381
+ * GPIO 3 -> M1 of CS5381
+ * GPIO 5 <- external power present (D2X only)
+ * GPIO 7 -> ALT
+ * GPIO 8 -> enable output to speakers
+ *
+ * CM9780:
+ *
+ * GPO 0 -> route line-in (0) or AC97 output (1) to CS5381 input
+ */
+
+/*
+ * Xonar HDAV1.3 (Deluxe)
+ * ----------------------
+ *
+ * CMI8788:
+ *
+ * I²C <-> PCM1796 (front)
+ *
+ * GPI 0 <- external power present
+ *
+ * GPIO 0 -> enable output to speakers
+ * GPIO 2 -> M0 of CS5381
+ * GPIO 3 -> M1 of CS5381
+ * GPIO 8 -> route input jack to line-in (0) or mic-in (1)
+ *
+ * TXD -> HDMI controller
+ * RXD <- HDMI controller
+ *
+ * PCM1796 front: AD1,0 <- 0,0
+ *
+ * CM9780:
+ *
+ * GPO 0 -> route line-in (0) or AC97 output (1) to CS5381 input
+ *
+ * no daughterboard
+ * ----------------
+ *
+ * GPIO 4 <- 1
+ *
+ * H6 daughterboard
+ * ----------------
+ *
+ * GPIO 4 <- 0
+ * GPIO 5 <- 0
+ *
+ * I²C <-> PCM1796 (surround)
+ *     <-> PCM1796 (center/LFE)
+ *     <-> PCM1796 (back)
+ *
+ * PCM1796 surround:   AD1,0 <- 0,1
+ * PCM1796 center/LFE: AD1,0 <- 1,0
+ * PCM1796 back:       AD1,0 <- 1,1
+ *
+ * unknown daughterboard
+ * ---------------------
+ *
+ * GPIO 4 <- 0
+ * GPIO 5 <- 1
+ *
+ * I²C <-> CS4362A (surround, center/LFE, back)
+ *
+ * CS4362A: AD0 <- 0
+ */
+
+/*
+ * Xonar Essence ST (Deluxe)/STX
+ * -----------------------------
+ *
+ * CMI8788:
+ *
+ * I²C <-> PCM1792A
+ *     <-> CS2000 (ST only)
+ *
+ * ADC1 MCLK -> REF_CLK of CS2000 (ST only)
+ *
+ * GPI 0 <- external power present (STX only)
+ *
+ * GPIO 0 -> enable output to speakers
+ * GPIO 1 -> route HP to front panel (0) or rear jack (1)
+ * GPIO 2 -> M0 of CS5381
+ * GPIO 3 -> M1 of CS5381
+ * GPIO 7 -> route output to speaker jacks (0) or HP (1)
+ * GPIO 8 -> route input jack to line-in (0) or mic-in (1)
+ *
+ * PCM1792A:
+ *
+ * AD1,0 <- 0,0
+ * SCK <- CLK_OUT of CS2000 (ST only)
+ *
+ * CS2000:
+ *
+ * AD0 <- 0
+ *
+ * CM9780:
+ *
+ * GPO 0 -> route line-in (0) or AC97 output (1) to CS5381 input
+ *
+ * H6 daughterboard
+ * ----------------
+ *
+ * GPIO 4 <- 0
+ * GPIO 5 <- 0
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <sound/ac97_codec.h>
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/tlv.h>
+#include "xonar.h"
+#include "cm9780.h"
+#include "pcm1796.h"
+#include "cs2000.h"
+
+
+#define GPIO_D2X_EXT_POWER	0x0020
+#define GPIO_D2_ALT		0x0080
+#define GPIO_D2_OUTPUT_ENABLE	0x0100
+
+#define GPI_EXT_POWER		0x01
+#define GPIO_INPUT_ROUTE	0x0100
+
+#define GPIO_HDAV_OUTPUT_ENABLE	0x0001
+
+#define GPIO_DB_MASK		0x0030
+#define GPIO_DB_H6		0x0000
+
+#define GPIO_ST_OUTPUT_ENABLE	0x0001
+#define GPIO_ST_HP_REAR		0x0002
+#define GPIO_ST_HP		0x0080
+
+#define I2C_DEVICE_PCM1796(i)	(0x98 + ((i) << 1))	/* 10011, ii, /W=0 */
+#define I2C_DEVICE_CS2000	0x9c			/* 100111, 0, /W=0 */
+
+#define PCM1796_REG_BASE	16
+
+
+struct xonar_pcm179x {
+	struct xonar_generic generic;
+	unsigned int dacs;
+	u8 pcm1796_regs[4][5];
+	unsigned int current_rate;
+	bool os_128;
+	bool hp_active;
+	s8 hp_gain_offset;
+	bool has_cs2000;
+	u8 cs2000_fun_cfg_1;
+};
+
+struct xonar_hdav {
+	struct xonar_pcm179x pcm179x;
+	struct xonar_hdmi hdmi;
+};
+
+
+static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
+				     u8 reg, u8 value)
+{
+	/* maps ALSA channel pair number to SPI output */
+	static const u8 codec_map[4] = {
+		0, 1, 2, 4
+	};
+	oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER  |
+			 OXYGEN_SPI_DATA_LENGTH_2 |
+			 OXYGEN_SPI_CLOCK_160 |
+			 (codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
+			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
+			 (reg << 8) | value);
+}
+
+static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
+				     u8 reg, u8 value)
+{
+	oxygen_write_i2c(chip, I2C_DEVICE_PCM1796(codec), reg, value);
+}
+
+static void pcm1796_write(struct oxygen *chip, unsigned int codec,
+			  u8 reg, u8 value)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	if ((chip->model.function_flags & OXYGEN_FUNCTION_2WIRE_SPI_MASK) ==
+	    OXYGEN_FUNCTION_SPI)
+		pcm1796_write_spi(chip, codec, reg, value);
+	else
+		pcm1796_write_i2c(chip, codec, reg, value);
+	if ((unsigned int)(reg - PCM1796_REG_BASE)
+	    < ARRAY_SIZE(data->pcm1796_regs[codec]))
+		data->pcm1796_regs[codec][reg - PCM1796_REG_BASE] = value;
+}
+
+static void pcm1796_write_cached(struct oxygen *chip, unsigned int codec,
+				 u8 reg, u8 value)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	if (value != data->pcm1796_regs[codec][reg - PCM1796_REG_BASE])
+		pcm1796_write(chip, codec, reg, value);
+}
+
+static void cs2000_write(struct oxygen *chip, u8 reg, u8 value)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	oxygen_write_i2c(chip, I2C_DEVICE_CS2000, reg, value);
+	if (reg == CS2000_FUN_CFG_1)
+		data->cs2000_fun_cfg_1 = value;
+}
+
+static void cs2000_write_cached(struct oxygen *chip, u8 reg, u8 value)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	if (reg != CS2000_FUN_CFG_1 ||
+	    value != data->cs2000_fun_cfg_1)
+		cs2000_write(chip, reg, value);
+}
+
+static void pcm1796_registers_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+	unsigned int i;
+	s8 gain_offset;
+
+	gain_offset = data->hp_active ? data->hp_gain_offset : 0;
+	for (i = 0; i < data->dacs; ++i) {
+		/* set ATLD before ATL/ATR */
+		pcm1796_write(chip, i, 18,
+			      data->pcm1796_regs[0][18 - PCM1796_REG_BASE]);
+		pcm1796_write(chip, i, 16, chip->dac_volume[i * 2]
+			      + gain_offset);
+		pcm1796_write(chip, i, 17, chip->dac_volume[i * 2 + 1]
+			      + gain_offset);
+		pcm1796_write(chip, i, 19,
+			      data->pcm1796_regs[0][19 - PCM1796_REG_BASE]);
+		pcm1796_write(chip, i, 20,
+			      data->pcm1796_regs[0][20 - PCM1796_REG_BASE]);
+		pcm1796_write(chip, i, 21, 0);
+	}
+}
+
+static void pcm1796_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	data->pcm1796_regs[0][18 - PCM1796_REG_BASE] = PCM1796_MUTE |
+		PCM1796_DMF_DISABLED | PCM1796_FMT_24_LJUST | PCM1796_ATLD;
+	data->pcm1796_regs[0][19 - PCM1796_REG_BASE] =
+		PCM1796_FLT_SHARP | PCM1796_ATS_1;
+	data->pcm1796_regs[0][20 - PCM1796_REG_BASE] = PCM1796_OS_64;
+	pcm1796_registers_init(chip);
+	data->current_rate = 48000;
+}
+
+static void xonar_d2_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	data->generic.anti_pop_delay = 300;
+	data->generic.output_enable_bit = GPIO_D2_OUTPUT_ENABLE;
+	data->dacs = 4;
+
+	pcm1796_init(chip);
+
+	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2_ALT);
+	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_D2_ALT);
+
+	oxygen_ac97_set_bits(chip, 0, CM9780_JACK, CM9780_FMIC2MIC);
+
+	xonar_init_cs53x1(chip);
+	xonar_enable_output(chip);
+
+	snd_component_add(chip->card, "PCM1796");
+	snd_component_add(chip->card, "CS5381");
+}
+
+static void xonar_d2x_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	data->generic.ext_power_reg = OXYGEN_GPIO_DATA;
+	data->generic.ext_power_int_reg = OXYGEN_GPIO_INTERRUPT_MASK;
+	data->generic.ext_power_bit = GPIO_D2X_EXT_POWER;
+	oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2X_EXT_POWER);
+	xonar_init_ext_power(chip);
+	xonar_d2_init(chip);
+}
+
+static void xonar_hdav_init(struct oxygen *chip)
+{
+	struct xonar_hdav *data = chip->model_data;
+
+	oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
+		       OXYGEN_2WIRE_LENGTH_8 |
+		       OXYGEN_2WIRE_INTERRUPT_MASK |
+		       OXYGEN_2WIRE_SPEED_FAST);
+
+	data->pcm179x.generic.anti_pop_delay = 100;
+	data->pcm179x.generic.output_enable_bit = GPIO_HDAV_OUTPUT_ENABLE;
+	data->pcm179x.generic.ext_power_reg = OXYGEN_GPI_DATA;
+	data->pcm179x.generic.ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->pcm179x.generic.ext_power_bit = GPI_EXT_POWER;
+	data->pcm179x.dacs = chip->model.private_data ? 4 : 1;
+
+	pcm1796_init(chip);
+
+	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_INPUT_ROUTE);
+	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_INPUT_ROUTE);
+
+	xonar_init_cs53x1(chip);
+	xonar_init_ext_power(chip);
+	xonar_hdmi_init(chip, &data->hdmi);
+	xonar_enable_output(chip);
+
+	snd_component_add(chip->card, "PCM1796");
+	snd_component_add(chip->card, "CS5381");
+}
+
+static void xonar_st_init_i2c(struct oxygen *chip)
+{
+	oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
+		       OXYGEN_2WIRE_LENGTH_8 |
+		       OXYGEN_2WIRE_INTERRUPT_MASK |
+		       OXYGEN_2WIRE_SPEED_FAST);
+}
+
+static void xonar_st_init_common(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	data->generic.anti_pop_delay = 100;
+	data->generic.output_enable_bit = GPIO_ST_OUTPUT_ENABLE;
+	data->dacs = chip->model.private_data ? 4 : 1;
+	data->hp_gain_offset = 2*-18;
+
+	pcm1796_init(chip);
+
+	oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
+			  GPIO_INPUT_ROUTE | GPIO_ST_HP_REAR | GPIO_ST_HP);
+	oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA,
+			    GPIO_INPUT_ROUTE | GPIO_ST_HP_REAR | GPIO_ST_HP);
+
+	xonar_init_cs53x1(chip);
+	xonar_enable_output(chip);
+
+	snd_component_add(chip->card, "PCM1792A");
+	snd_component_add(chip->card, "CS5381");
+}
+
+static void cs2000_registers_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	cs2000_write(chip, CS2000_GLOBAL_CFG, CS2000_FREEZE);
+	cs2000_write(chip, CS2000_DEV_CTRL, 0);
+	cs2000_write(chip, CS2000_DEV_CFG_1,
+		     CS2000_R_MOD_SEL_1 |
+		     (0 << CS2000_R_SEL_SHIFT) |
+		     CS2000_AUX_OUT_SRC_REF_CLK |
+		     CS2000_EN_DEV_CFG_1);
+	cs2000_write(chip, CS2000_DEV_CFG_2,
+		     (0 << CS2000_LOCK_CLK_SHIFT) |
+		     CS2000_FRAC_N_SRC_STATIC);
+	cs2000_write(chip, CS2000_RATIO_0 + 0, 0x00); /* 1.0 */
+	cs2000_write(chip, CS2000_RATIO_0 + 1, 0x10);
+	cs2000_write(chip, CS2000_RATIO_0 + 2, 0x00);
+	cs2000_write(chip, CS2000_RATIO_0 + 3, 0x00);
+	cs2000_write(chip, CS2000_FUN_CFG_1, data->cs2000_fun_cfg_1);
+	cs2000_write(chip, CS2000_FUN_CFG_2, 0);
+	cs2000_write(chip, CS2000_GLOBAL_CFG, CS2000_EN_DEV_CFG_2);
+}
+
+static void xonar_st_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	data->has_cs2000 = 1;
+	data->cs2000_fun_cfg_1 = CS2000_REF_CLK_DIV_1;
+
+	oxygen_write16(chip, OXYGEN_I2S_A_FORMAT,
+		       OXYGEN_RATE_48000 | OXYGEN_I2S_FORMAT_I2S |
+		       OXYGEN_I2S_MCLK_128 | OXYGEN_I2S_BITS_16 |
+		       OXYGEN_I2S_MASTER | OXYGEN_I2S_BCLK_64);
+
+	xonar_st_init_i2c(chip);
+	cs2000_registers_init(chip);
+	xonar_st_init_common(chip);
+
+	snd_component_add(chip->card, "CS2000");
+}
+
+static void xonar_stx_init(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	xonar_st_init_i2c(chip);
+	data->generic.ext_power_reg = OXYGEN_GPI_DATA;
+	data->generic.ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+	data->generic.ext_power_bit = GPI_EXT_POWER;
+	xonar_init_ext_power(chip);
+	xonar_st_init_common(chip);
+}
+
+static void xonar_d2_cleanup(struct oxygen *chip)
+{
+	xonar_disable_output(chip);
+}
+
+static void xonar_hdav_cleanup(struct oxygen *chip)
+{
+	xonar_hdmi_cleanup(chip);
+	xonar_disable_output(chip);
+	msleep(2);
+}
+
+static void xonar_st_cleanup(struct oxygen *chip)
+{
+	xonar_disable_output(chip);
+}
+
+static void xonar_d2_suspend(struct oxygen *chip)
+{
+	xonar_d2_cleanup(chip);
+}
+
+static void xonar_hdav_suspend(struct oxygen *chip)
+{
+	xonar_hdav_cleanup(chip);
+}
+
+static void xonar_st_suspend(struct oxygen *chip)
+{
+	xonar_st_cleanup(chip);
+}
+
+static void xonar_d2_resume(struct oxygen *chip)
+{
+	pcm1796_registers_init(chip);
+	xonar_enable_output(chip);
+}
+
+static void xonar_hdav_resume(struct oxygen *chip)
+{
+	struct xonar_hdav *data = chip->model_data;
+
+	pcm1796_registers_init(chip);
+	xonar_hdmi_resume(chip, &data->hdmi);
+	xonar_enable_output(chip);
+}
+
+static void xonar_stx_resume(struct oxygen *chip)
+{
+	pcm1796_registers_init(chip);
+	xonar_enable_output(chip);
+}
+
+static void xonar_st_resume(struct oxygen *chip)
+{
+	cs2000_registers_init(chip);
+	xonar_stx_resume(chip);
+}
+
+static unsigned int mclk_from_rate(struct oxygen *chip, unsigned int rate)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	if (rate <= 32000)
+		return OXYGEN_I2S_MCLK_512;
+	else if (rate <= 48000 && data->os_128)
+		return OXYGEN_I2S_MCLK_512;
+	else if (rate <= 96000)
+		return OXYGEN_I2S_MCLK_256;
+	else
+		return OXYGEN_I2S_MCLK_128;
+}
+
+static unsigned int get_pcm1796_i2s_mclk(struct oxygen *chip,
+					 unsigned int channel,
+					 struct snd_pcm_hw_params *params)
+{
+	if (channel == PCM_MULTICH)
+		return mclk_from_rate(chip, params_rate(params));
+	else
+		return oxygen_default_i2s_mclk(chip, channel, params);
+}
+
+static void update_pcm1796_oversampling(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+	unsigned int i;
+	u8 reg;
+
+	if (data->current_rate <= 32000)
+		reg = PCM1796_OS_128;
+	else if (data->current_rate <= 48000 && data->os_128)
+		reg = PCM1796_OS_128;
+	else if (data->current_rate <= 96000 || data->os_128)
+		reg = PCM1796_OS_64;
+	else
+		reg = PCM1796_OS_32;
+	for (i = 0; i < data->dacs; ++i)
+		pcm1796_write_cached(chip, i, 20, reg);
+}
+
+static void set_pcm1796_params(struct oxygen *chip,
+			       struct snd_pcm_hw_params *params)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+
+	data->current_rate = params_rate(params);
+	update_pcm1796_oversampling(chip);
+}
+
+static void update_pcm1796_volume(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+	unsigned int i;
+	s8 gain_offset;
+
+	gain_offset = data->hp_active ? data->hp_gain_offset : 0;
+	for (i = 0; i < data->dacs; ++i) {
+		pcm1796_write_cached(chip, i, 16, chip->dac_volume[i * 2]
+				     + gain_offset);
+		pcm1796_write_cached(chip, i, 17, chip->dac_volume[i * 2 + 1]
+				     + gain_offset);
+	}
+}
+
+static void update_pcm1796_mute(struct oxygen *chip)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+	unsigned int i;
+	u8 value;
+
+	value = PCM1796_DMF_DISABLED | PCM1796_FMT_24_LJUST | PCM1796_ATLD;
+	if (chip->dac_mute)
+		value |= PCM1796_MUTE;
+	for (i = 0; i < data->dacs; ++i)
+		pcm1796_write_cached(chip, i, 18, value);
+}
+
+static void update_cs2000_rate(struct oxygen *chip, unsigned int rate)
+{
+	struct xonar_pcm179x *data = chip->model_data;
+	u8 rate_mclk, reg;
+
+	switch (rate) {
+		/* XXX Why is the I2S A MCLK half the actual I2S MCLK? */
+	case 32000:
+		rate_mclk = OXYGEN_RATE_32000 | OXYGEN_I2S_MCLK_256;
+		break;
+	case 44100:
+		if (data->os_128)
+			rate_mclk = OXYGEN_RATE_44100 | OXYGEN_I2S_MCLK_256;
+		else
+			rate_mclk = OXYGEN_RATE_44100 | OXYGEN_I2S_MCLK_128;
+		break;
+	default: /* 48000 */
+		if (data->os_128)
+			rate_mclk = OXYGEN_RATE_48000 | OXYGEN_I2S_MCLK_256;
+		else
+			rate_mclk = OXYGEN_RATE_48000 | OXYGEN_I2S_MCLK_128;
+		break;
+	case 64000:
+		rate_mclk = OXYGEN_RATE_32000 | OXYGEN_I2S_MCLK_256;
+		break;
+	case 88200:
+		rate_mclk = OXYGEN_RATE_44100 | OXYGEN_I2S_MCLK_256;
+		break;
+	case 96000:
+		rate_mclk = OXYGEN_RATE_48000 | OXYGEN_I2S_MCLK_256;
+		break;
+	case 176400:
+		rate_mclk = OXYGEN_RATE_44100 | OXYGEN_I2S_MCLK_256;
+		break;
+	case 192000:
+		rate_mclk = OXYGEN_RATE_48000 | OXYGEN_I2S_MCLK_256;
+		break;
+	}
+	oxygen_write16_masked(chip, OXYGEN_I2S_A_FORMAT, rate_mclk,
+			      OXYGEN_I2S_RATE_MASK | OXYGEN_I2S_MCLK_MASK);
+	if ((rate_mclk & OXYGEN_I2S_MCLK_MASK) <= OXYGEN_I2S_MCLK_128)
+		reg = CS2000_REF_CLK_DIV_1;
+	else
+		reg = CS2000_REF_CLK_DIV_2;
+	cs2000_write_cached(chip, CS2000_FUN_CFG_1, reg);
+}
+
+static void set_st_params(struct oxygen *chip,
+			  struct snd_pcm_hw_params *params)
+{
+	update_cs2000_rate(chip, params_rate(params));
+	set_pcm1796_params(chip, params);
+}
+
+static void set_hdav_params(struct oxygen *chip,
+			    struct snd_pcm_hw_params *params)
+{
+	struct xonar_hdav *data = chip->model_data;
+
+	set_pcm1796_params(chip, params);
+	xonar_set_hdmi_params(chip, &data->hdmi, params);
+}
+
+static const struct snd_kcontrol_new alt_switch = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Analog Loopback Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = xonar_gpio_bit_switch_get,
+	.put = xonar_gpio_bit_switch_put,
+	.private_value = GPIO_D2_ALT,
+};
+
+static int rolloff_info(struct snd_kcontrol *ctl,
+			struct snd_ctl_elem_info *info)
+{
+	static const char *const names[2] = {
+		"Sharp Roll-off", "Slow Roll-off"
+	};
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 2;
+	if (info->value.enumerated.item >= 2)
+		info->value.enumerated.item = 1;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int rolloff_get(struct snd_kcontrol *ctl,
+		       struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+
+	value->value.enumerated.item[0] =
+		(data->pcm1796_regs[0][19 - PCM1796_REG_BASE] &
+		 PCM1796_FLT_MASK) != PCM1796_FLT_SHARP;
+	return 0;
+}
+
+static int rolloff_put(struct snd_kcontrol *ctl,
+		       struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+	unsigned int i;
+	int changed;
+	u8 reg;
+
+	mutex_lock(&chip->mutex);
+	reg = data->pcm1796_regs[0][19 - PCM1796_REG_BASE];
+	reg &= ~PCM1796_FLT_MASK;
+	if (!value->value.enumerated.item[0])
+		reg |= PCM1796_FLT_SHARP;
+	else
+		reg |= PCM1796_FLT_SLOW;
+	changed = reg != data->pcm1796_regs[0][19 - PCM1796_REG_BASE];
+	if (changed) {
+		for (i = 0; i < data->dacs; ++i)
+			pcm1796_write(chip, i, 19, reg);
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+static const struct snd_kcontrol_new rolloff_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DAC Filter Playback Enum",
+	.info = rolloff_info,
+	.get = rolloff_get,
+	.put = rolloff_put,
+};
+
+static int os_128_info(struct snd_kcontrol *ctl, struct snd_ctl_elem_info *info)
+{
+	static const char *const names[2] = { "64x", "128x" };
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 2;
+	if (info->value.enumerated.item >= 2)
+		info->value.enumerated.item = 1;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int os_128_get(struct snd_kcontrol *ctl,
+		      struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+
+	value->value.enumerated.item[0] = data->os_128;
+	return 0;
+}
+
+static int os_128_put(struct snd_kcontrol *ctl,
+		      struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+	int changed;
+
+	mutex_lock(&chip->mutex);
+	changed = value->value.enumerated.item[0] != data->os_128;
+	if (changed) {
+		data->os_128 = value->value.enumerated.item[0];
+		if (data->has_cs2000)
+			update_cs2000_rate(chip, data->current_rate);
+		oxygen_write16_masked(chip, OXYGEN_I2S_MULTICH_FORMAT,
+				      mclk_from_rate(chip, data->current_rate),
+				      OXYGEN_I2S_MCLK_MASK);
+		update_pcm1796_oversampling(chip);
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+static const struct snd_kcontrol_new os_128_control = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "DAC Oversampling Playback Enum",
+	.info = os_128_info,
+	.get = os_128_get,
+	.put = os_128_put,
+};
+
+static int st_output_switch_info(struct snd_kcontrol *ctl,
+				 struct snd_ctl_elem_info *info)
+{
+	static const char *const names[3] = {
+		"Speakers", "Headphones", "FP Headphones"
+	};
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 3;
+	if (info->value.enumerated.item >= 3)
+		info->value.enumerated.item = 2;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int st_output_switch_get(struct snd_kcontrol *ctl,
+				struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	u16 gpio;
+
+	gpio = oxygen_read16(chip, OXYGEN_GPIO_DATA);
+	if (!(gpio & GPIO_ST_HP))
+		value->value.enumerated.item[0] = 0;
+	else if (gpio & GPIO_ST_HP_REAR)
+		value->value.enumerated.item[0] = 1;
+	else
+		value->value.enumerated.item[0] = 2;
+	return 0;
+}
+
+
+static int st_output_switch_put(struct snd_kcontrol *ctl,
+				struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+	u16 gpio_old, gpio;
+
+	mutex_lock(&chip->mutex);
+	gpio_old = oxygen_read16(chip, OXYGEN_GPIO_DATA);
+	gpio = gpio_old;
+	switch (value->value.enumerated.item[0]) {
+	case 0:
+		gpio &= ~(GPIO_ST_HP | GPIO_ST_HP_REAR);
+		break;
+	case 1:
+		gpio |= GPIO_ST_HP | GPIO_ST_HP_REAR;
+		break;
+	case 2:
+		gpio = (gpio | GPIO_ST_HP) & ~GPIO_ST_HP_REAR;
+		break;
+	}
+	oxygen_write16(chip, OXYGEN_GPIO_DATA, gpio);
+	data->hp_active = gpio & GPIO_ST_HP;
+	update_pcm1796_volume(chip);
+	mutex_unlock(&chip->mutex);
+	return gpio != gpio_old;
+}
+
+static int st_hp_volume_offset_info(struct snd_kcontrol *ctl,
+				    struct snd_ctl_elem_info *info)
+{
+	static const char *const names[3] = {
+		"< 64 ohms", "64-300 ohms", "300-600 ohms"
+	};
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 3;
+	if (info->value.enumerated.item > 2)
+		info->value.enumerated.item = 2;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int st_hp_volume_offset_get(struct snd_kcontrol *ctl,
+				   struct snd_ctl_elem_value *value)
+{
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+
+	mutex_lock(&chip->mutex);
+	if (data->hp_gain_offset < 2*-6)
+		value->value.enumerated.item[0] = 0;
+	else if (data->hp_gain_offset < 0)
+		value->value.enumerated.item[0] = 1;
+	else
+		value->value.enumerated.item[0] = 2;
+	mutex_unlock(&chip->mutex);
+	return 0;
+}
+
+
+static int st_hp_volume_offset_put(struct snd_kcontrol *ctl,
+				   struct snd_ctl_elem_value *value)
+{
+	static const s8 offsets[] = { 2*-18, 2*-6, 0 };
+	struct oxygen *chip = ctl->private_data;
+	struct xonar_pcm179x *data = chip->model_data;
+	s8 offset;
+	int changed;
+
+	if (value->value.enumerated.item[0] > 2)
+		return -EINVAL;
+	offset = offsets[value->value.enumerated.item[0]];
+	mutex_lock(&chip->mutex);
+	changed = offset != data->hp_gain_offset;
+	if (changed) {
+		data->hp_gain_offset = offset;
+		update_pcm1796_volume(chip);
+	}
+	mutex_unlock(&chip->mutex);
+	return changed;
+}
+
+static const struct snd_kcontrol_new st_controls[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Analog Output",
+		.info = st_output_switch_info,
+		.get = st_output_switch_get,
+		.put = st_output_switch_put,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Headphones Impedance Playback Enum",
+		.info = st_hp_volume_offset_info,
+		.get = st_hp_volume_offset_get,
+		.put = st_hp_volume_offset_put,
+	},
+};
+
+static void xonar_line_mic_ac97_switch(struct oxygen *chip,
+				       unsigned int reg, unsigned int mute)
+{
+	if (reg == AC97_LINE) {
+		spin_lock_irq(&chip->reg_lock);
+		oxygen_write16_masked(chip, OXYGEN_GPIO_DATA,
+				      mute ? GPIO_INPUT_ROUTE : 0,
+				      GPIO_INPUT_ROUTE);
+		spin_unlock_irq(&chip->reg_lock);
+	}
+}
+
+static const DECLARE_TLV_DB_SCALE(pcm1796_db_scale, -6000, 50, 0);
+
+static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
+{
+	if (!strncmp(template->name, "CD Capture ", 11))
+		/* CD in is actually connected to the video in pin */
+		template->private_value ^= AC97_CD ^ AC97_VIDEO;
+	return 0;
+}
+
+static int xonar_st_control_filter(struct snd_kcontrol_new *template)
+{
+	if (!strncmp(template->name, "CD Capture ", 11))
+		return 1; /* no CD input */
+	return 0;
+}
+
+static int add_pcm1796_controls(struct oxygen *chip)
+{
+	int err;
+
+	err = snd_ctl_add(chip->card, snd_ctl_new1(&rolloff_control, chip));
+	if (err < 0)
+		return err;
+	err = snd_ctl_add(chip->card, snd_ctl_new1(&os_128_control, chip));
+	if (err < 0)
+		return err;
+	return 0;
+}
+
+static int xonar_d2_mixer_init(struct oxygen *chip)
+{
+	int err;
+
+	err = snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
+	if (err < 0)
+		return err;
+	err = add_pcm1796_controls(chip);
+	if (err < 0)
+		return err;
+	return 0;
+}
+
+static int xonar_hdav_mixer_init(struct oxygen *chip)
+{
+	return add_pcm1796_controls(chip);
+}
+
+static int xonar_st_mixer_init(struct oxygen *chip)
+{
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(st_controls); ++i) {
+		err = snd_ctl_add(chip->card,
+				  snd_ctl_new1(&st_controls[i], chip));
+		if (err < 0)
+			return err;
+	}
+	err = add_pcm1796_controls(chip);
+	if (err < 0)
+		return err;
+	return 0;
+}
+
+static const struct oxygen_model model_xonar_d2 = {
+	.longname = "Asus Virtuoso 200",
+	.chip = "AV200",
+	.init = xonar_d2_init,
+	.control_filter = xonar_d2_control_filter,
+	.mixer_init = xonar_d2_mixer_init,
+	.cleanup = xonar_d2_cleanup,
+	.suspend = xonar_d2_suspend,
+	.resume = xonar_d2_resume,
+	.get_i2s_mclk = get_pcm1796_i2s_mclk,
+	.set_dac_params = set_pcm1796_params,
+	.set_adc_params = xonar_set_cs53x1_params,
+	.update_dac_volume = update_pcm1796_volume,
+	.update_dac_mute = update_pcm1796_mute,
+	.dac_tlv = pcm1796_db_scale,
+	.model_data_size = sizeof(struct xonar_pcm179x),
+	.device_config = PLAYBACK_0_TO_I2S |
+			 PLAYBACK_1_TO_SPDIF |
+			 CAPTURE_0_FROM_I2S_2 |
+			 CAPTURE_1_FROM_SPDIF |
+			 MIDI_OUTPUT |
+			 MIDI_INPUT,
+	.dac_channels = 8,
+	.dac_volume_min = 255 - 2*60,
+	.dac_volume_max = 255,
+	.misc_flags = OXYGEN_MISC_MIDI,
+	.function_flags = OXYGEN_FUNCTION_SPI |
+			  OXYGEN_FUNCTION_ENABLE_SPI_4_5,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+};
+
+static const struct oxygen_model model_xonar_hdav = {
+	.longname = "Asus Virtuoso 200",
+	.chip = "AV200",
+	.init = xonar_hdav_init,
+	.mixer_init = xonar_hdav_mixer_init,
+	.cleanup = xonar_hdav_cleanup,
+	.suspend = xonar_hdav_suspend,
+	.resume = xonar_hdav_resume,
+	.pcm_hardware_filter = xonar_hdmi_pcm_hardware_filter,
+	.get_i2s_mclk = get_pcm1796_i2s_mclk,
+	.set_dac_params = set_hdav_params,
+	.set_adc_params = xonar_set_cs53x1_params,
+	.update_dac_volume = update_pcm1796_volume,
+	.update_dac_mute = update_pcm1796_mute,
+	.uart_input = xonar_hdmi_uart_input,
+	.ac97_switch = xonar_line_mic_ac97_switch,
+	.dac_tlv = pcm1796_db_scale,
+	.model_data_size = sizeof(struct xonar_hdav),
+	.device_config = PLAYBACK_0_TO_I2S |
+			 PLAYBACK_1_TO_SPDIF |
+			 CAPTURE_0_FROM_I2S_2 |
+			 CAPTURE_1_FROM_SPDIF,
+	.dac_channels = 8,
+	.dac_volume_min = 255 - 2*60,
+	.dac_volume_max = 255,
+	.misc_flags = OXYGEN_MISC_MIDI,
+	.function_flags = OXYGEN_FUNCTION_2WIRE,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+};
+
+static const struct oxygen_model model_xonar_st = {
+	.longname = "Asus Virtuoso 100",
+	.chip = "AV200",
+	.init = xonar_st_init,
+	.control_filter = xonar_st_control_filter,
+	.mixer_init = xonar_st_mixer_init,
+	.cleanup = xonar_st_cleanup,
+	.suspend = xonar_st_suspend,
+	.resume = xonar_st_resume,
+	.get_i2s_mclk = get_pcm1796_i2s_mclk,
+	.set_dac_params = set_st_params,
+	.set_adc_params = xonar_set_cs53x1_params,
+	.update_dac_volume = update_pcm1796_volume,
+	.update_dac_mute = update_pcm1796_mute,
+	.ac97_switch = xonar_line_mic_ac97_switch,
+	.dac_tlv = pcm1796_db_scale,
+	.model_data_size = sizeof(struct xonar_pcm179x),
+	.device_config = PLAYBACK_0_TO_I2S |
+			 PLAYBACK_1_TO_SPDIF |
+			 CAPTURE_0_FROM_I2S_2,
+	.dac_channels = 2,
+	.dac_volume_min = 255 - 2*60,
+	.dac_volume_max = 255,
+	.function_flags = OXYGEN_FUNCTION_2WIRE,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+};
+
+int __devinit get_xonar_pcm179x_model(struct oxygen *chip,
+				      const struct pci_device_id *id)
+{
+	switch (id->subdevice) {
+	case 0x8269:
+		chip->model = model_xonar_d2;
+		chip->model.shortname = "Xonar D2";
+		break;
+	case 0x82b7:
+		chip->model = model_xonar_d2;
+		chip->model.shortname = "Xonar D2X";
+		chip->model.init = xonar_d2x_init;
+		break;
+	case 0x8314:
+		chip->model = model_xonar_hdav;
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		default:
+			chip->model.shortname = "Xonar HDAV1.3";
+			break;
+		case GPIO_DB_H6:
+			chip->model.shortname = "Xonar HDAV1.3+H6";
+			chip->model.private_data = 1;
+			break;
+		}
+		break;
+	case 0x835d:
+		chip->model = model_xonar_st;
+		oxygen_clear_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DB_MASK);
+		switch (oxygen_read16(chip, OXYGEN_GPIO_DATA) & GPIO_DB_MASK) {
+		default:
+			chip->model.shortname = "Xonar ST";
+			break;
+		case GPIO_DB_H6:
+			chip->model.shortname = "Xonar ST+H6";
+			chip->model.dac_channels = 8;
+			chip->model.private_data = 1;
+			break;
+		}
+		break;
+	case 0x835c:
+		chip->model = model_xonar_st;
+		chip->model.shortname = "Xonar STX";
+		chip->model.init = xonar_stx_init;
+		chip->model.resume = xonar_stx_resume;
+		chip->model.set_dac_params = set_pcm1796_params;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c
index 64b8599..7717e01 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c
@@ -131,7 +131,7 @@
 		return err;
 	}
 
-	snd_card_set_dev(card, &handle_to_dev(link));
+	snd_card_set_dev(card, &link->dev);
 
 	pdacf->index = i;
 	card_list[i] = card;
@@ -142,12 +142,10 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.NumPorts1 = 16;
 
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT | IRQ_FORCED_PULSE;
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_FORCED_PULSE;
 	// link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
 
-	link->irq.IRQInfo1 = 0 /* | IRQ_LEVEL_ID */;
 	link->irq.Handler = pdacf_interrupt;
-	link->irq.Instance = pdacf;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c
index 1492744..7be3b33 100644
--- a/sound/pcmcia/vx/vxpocket.c
+++ b/sound/pcmcia/vx/vxpocket.c
@@ -161,11 +161,9 @@
 	link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 	link->io.NumPorts1 = 16;
 
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
 
-	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = &snd_vx_irq_handler;
-	link->irq.Instance = chip;
 
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	link->conf.IntType = INT_MEMORY_AND_IO;
@@ -244,7 +242,7 @@
 	if (ret)
 		goto failed;
 
-	chip->dev = &handle_to_dev(link);
+	chip->dev = &link->dev;
 	snd_card_set_dev(chip->card, chip->dev);
 
 	if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
diff --git a/sound/ppc/awacs.c b/sound/ppc/awacs.c
index 2cc0eda..2e15646 100644
--- a/sound/ppc/awacs.c
+++ b/sound/ppc/awacs.c
@@ -479,7 +479,7 @@
 
 static struct snd_kcontrol_new snd_pmac_awacs_amp_vol[] __devinitdata = {
 	{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	  .name = "PC Speaker Playback Volume",
+	  .name = "Speaker Playback Volume",
 	  .info = snd_pmac_awacs_info_volume_amp,
 	  .get = snd_pmac_awacs_get_volume_amp,
 	  .put = snd_pmac_awacs_put_volume_amp,
@@ -525,7 +525,7 @@
 
 static struct snd_kcontrol_new snd_pmac_awacs_amp_spk_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "PC Speaker Playback Switch",
+	.name = "Speaker Playback Switch",
 	.info = snd_pmac_boolean_stereo_info,
 	.get = snd_pmac_awacs_get_switch_amp,
 	.put = snd_pmac_awacs_put_switch_amp,
@@ -696,17 +696,17 @@
 };
 
 static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __devinitdata = {
-	AWACS_VOLUME("PC Speaker Playback Volume", 4, 6, 1),
+	AWACS_VOLUME("Speaker Playback Volume", 4, 6, 1),
 };
 
 static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __devinitdata =
-AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
+AWACS_SWITCH("Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1);
 
 static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac1 __devinitdata =
-AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
+AWACS_SWITCH("Speaker Playback Switch", 1, SHIFT_PAROUT1, 1);
 
 static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac2 __devinitdata =
-AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
+AWACS_SWITCH("Speaker Playback Switch", 1, SHIFT_PAROUT1, 0);
 
 
 /*
diff --git a/sound/ppc/burgundy.c b/sound/ppc/burgundy.c
index 16ed240..0accfe4 100644
--- a/sound/ppc/burgundy.c
+++ b/sound/ppc/burgundy.c
@@ -505,7 +505,7 @@
 			MASK_ADDR_BURGUNDY_GAINLINE, 1, 0),
 	BURGUNDY_VOLUME_B("Mic Gain Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_GAINMIC, 1, 0),
-	BURGUNDY_VOLUME_B("PC Speaker Playback Volume", 0,
+	BURGUNDY_VOLUME_B("Speaker Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_ATTENSPEAKER, 1, 1),
 	BURGUNDY_VOLUME_B("Line out Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_ATTENLINEOUT, 1, 1),
@@ -527,7 +527,7 @@
 			MASK_ADDR_BURGUNDY_VOLMIC, 16),
 	BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0,
 			MASK_ADDR_BURGUNDY_GAINMIC, 1, 0),
-	BURGUNDY_VOLUME_B("PC Speaker Playback Volume", 0,
+	BURGUNDY_VOLUME_B("Speaker Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_ATTENMONO, 0, 1),
 	BURGUNDY_VOLUME_B("Line out Playback Volume", 0,
 			MASK_ADDR_BURGUNDY_ATTENSPEAKER, 1, 1),
@@ -549,11 +549,11 @@
 	BURGUNDY_OUTPUT_INTERN
 	| BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
 static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __devinitdata =
-BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
+BURGUNDY_SWITCH_B("Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1);
 static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __devinitdata =
-BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0,
+BURGUNDY_SWITCH_B("Speaker Playback Switch", 0,
 	MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES,
 	BURGUNDY_OUTPUT_INTERN, 0, 0);
 static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __devinitdata =
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 08e584d..789f44f 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -905,7 +905,7 @@
 };
 static struct snd_kcontrol_new tumbler_speaker_sw __devinitdata = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "PC Speaker Playback Switch",
+	.name = "Speaker Playback Switch",
 	.info = snd_pmac_boolean_mono_info,
 	.get = tumbler_get_mute_switch,
 	.put = tumbler_put_mute_switch,
diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig
index aed0f90..61139f3 100644
--- a/sound/sh/Kconfig
+++ b/sound/sh/Kconfig
@@ -19,5 +19,13 @@
 	help
 	  ALSA Sound driver for the SEGA Dreamcast console.
 
+config SND_SH_DAC_AUDIO
+	tristate "SuperH DAC audio support"
+	depends on SND
+	depends on CPU_SH3 && HIGH_RES_TIMERS
+	select SND_PCM
+	help
+	  Say Y here to include support for the on-chip DAC.
+
 endif	# SND_SUPERH
 
diff --git a/sound/sh/Makefile b/sound/sh/Makefile
index 8fdcb6e..7d09b51 100644
--- a/sound/sh/Makefile
+++ b/sound/sh/Makefile
@@ -3,6 +3,8 @@
 #
 
 snd-aica-objs := aica.o
+snd-sh_dac_audio-objs := sh_dac_audio.o
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_AICA) += snd-aica.o
+obj-$(CONFIG_SND_SH_DAC_AUDIO) += snd-sh_dac_audio.o
diff --git a/sound/sh/sh_dac_audio.c b/sound/sh/sh_dac_audio.c
new file mode 100644
index 0000000..76d9ad2
--- /dev/null
+++ b/sound/sh/sh_dac_audio.c
@@ -0,0 +1,453 @@
+/*
+ * sh_dac_audio.c - SuperH DAC audio driver for ALSA
+ *
+ * Copyright (c) 2009 by Rafael Ignacio Zurita <rizurita@yahoo.com>
+ *
+ *
+ * Based on sh_dac_audio.c (Copyright (C) 2004, 2005 by Andriy Skulysh)
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
+#include <sound/sh_dac_audio.h>
+#include <asm/clock.h>
+#include <asm/hd64461.h>
+#include <mach/hp6xx.h>
+#include <cpu/dac.h>
+
+MODULE_AUTHOR("Rafael Ignacio Zurita <rizurita@yahoo.com>");
+MODULE_DESCRIPTION("SuperH DAC audio driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{SuperH DAC audio support}}");
+
+/* Module Parameters */
+static int index = SNDRV_DEFAULT_IDX1;
+static char *id = SNDRV_DEFAULT_STR1;
+module_param(index, int, 0444);
+MODULE_PARM_DESC(index, "Index value for SuperH DAC audio.");
+module_param(id, charp, 0444);
+MODULE_PARM_DESC(id, "ID string for SuperH DAC audio.");
+
+/* main struct */
+struct snd_sh_dac {
+	struct snd_card *card;
+	struct snd_pcm_substream *substream;
+	struct hrtimer hrtimer;
+	ktime_t wakeups_per_second;
+
+	int rate;
+	int empty;
+	char *data_buffer, *buffer_begin, *buffer_end;
+	int processed; /* bytes proccesed, to compare with period_size */
+	int buffer_size;
+	struct dac_audio_pdata *pdata;
+};
+
+
+static void dac_audio_start_timer(struct snd_sh_dac *chip)
+{
+	hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
+		      HRTIMER_MODE_REL);
+}
+
+static void dac_audio_stop_timer(struct snd_sh_dac *chip)
+{
+	hrtimer_cancel(&chip->hrtimer);
+}
+
+static void dac_audio_reset(struct snd_sh_dac *chip)
+{
+	dac_audio_stop_timer(chip);
+	chip->buffer_begin = chip->buffer_end = chip->data_buffer;
+	chip->processed = 0;
+	chip->empty = 1;
+}
+
+static void dac_audio_set_rate(struct snd_sh_dac *chip)
+{
+	chip->wakeups_per_second = ktime_set(0, 1000000000 / chip->rate);
+}
+
+
+/* PCM INTERFACE */
+
+static struct snd_pcm_hardware snd_sh_dac_pcm_hw = {
+	.info			= (SNDRV_PCM_INFO_MMAP |
+					SNDRV_PCM_INFO_MMAP_VALID |
+					SNDRV_PCM_INFO_INTERLEAVED |
+					SNDRV_PCM_INFO_HALF_DUPLEX),
+	.formats		= SNDRV_PCM_FMTBIT_U8,
+	.rates			= SNDRV_PCM_RATE_8000,
+	.rate_min		= 8000,
+	.rate_max		= 8000,
+	.channels_min		= 1,
+	.channels_max		= 1,
+	.buffer_bytes_max	= (48*1024),
+	.period_bytes_min	= 1,
+	.period_bytes_max	= (48*1024),
+	.periods_min		= 1,
+	.periods_max		= 1024,
+};
+
+static int snd_sh_dac_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	runtime->hw = snd_sh_dac_pcm_hw;
+
+	chip->substream = substream;
+	chip->buffer_begin = chip->buffer_end = chip->data_buffer;
+	chip->processed = 0;
+	chip->empty = 1;
+
+	chip->pdata->start(chip->pdata);
+
+	return 0;
+}
+
+static int snd_sh_dac_pcm_close(struct snd_pcm_substream *substream)
+{
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+
+	chip->substream = NULL;
+
+	dac_audio_stop_timer(chip);
+	chip->pdata->stop(chip->pdata);
+
+	return 0;
+}
+
+static int snd_sh_dac_pcm_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *hw_params)
+{
+	return snd_pcm_lib_malloc_pages(substream,
+			params_buffer_bytes(hw_params));
+}
+
+static int snd_sh_dac_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_pages(substream);
+}
+
+static int snd_sh_dac_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = chip->substream->runtime;
+
+	chip->buffer_size = runtime->buffer_size;
+	memset(chip->data_buffer, 0, chip->pdata->buffer_size);
+
+	return 0;
+}
+
+static int snd_sh_dac_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		dac_audio_start_timer(chip);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		chip->buffer_begin = chip->buffer_end = chip->data_buffer;
+		chip->processed = 0;
+		chip->empty = 1;
+		dac_audio_stop_timer(chip);
+		break;
+	default:
+		 return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int snd_sh_dac_pcm_copy(struct snd_pcm_substream *substream, int channel,
+	snd_pcm_uframes_t pos, void __user *src, snd_pcm_uframes_t count)
+{
+	/* channel is not used (interleaved data) */
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	ssize_t b_count = frames_to_bytes(runtime , count);
+	ssize_t b_pos = frames_to_bytes(runtime , pos);
+
+	if (count < 0)
+		return -EINVAL;
+
+	if (!count)
+		return 0;
+
+	memcpy_toio(chip->data_buffer + b_pos, src, b_count);
+	chip->buffer_end = chip->data_buffer + b_pos + b_count;
+
+	if (chip->empty) {
+		chip->empty = 0;
+		dac_audio_start_timer(chip);
+	}
+
+	return 0;
+}
+
+static int snd_sh_dac_pcm_silence(struct snd_pcm_substream *substream,
+				  int channel, snd_pcm_uframes_t pos,
+				  snd_pcm_uframes_t count)
+{
+	/* channel is not used (interleaved data) */
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	ssize_t b_count = frames_to_bytes(runtime , count);
+	ssize_t b_pos = frames_to_bytes(runtime , pos);
+
+	if (count < 0)
+		return -EINVAL;
+
+	if (!count)
+		return 0;
+
+	memset_io(chip->data_buffer + b_pos, 0, b_count);
+	chip->buffer_end = chip->data_buffer + b_pos + b_count;
+
+	if (chip->empty) {
+		chip->empty = 0;
+		dac_audio_start_timer(chip);
+	}
+
+	return 0;
+}
+
+static
+snd_pcm_uframes_t snd_sh_dac_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_sh_dac *chip = snd_pcm_substream_chip(substream);
+	int pointer = chip->buffer_begin - chip->data_buffer;
+
+	return pointer;
+}
+
+/* pcm ops */
+static struct snd_pcm_ops snd_sh_dac_pcm_ops = {
+	.open		= snd_sh_dac_pcm_open,
+	.close		= snd_sh_dac_pcm_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= snd_sh_dac_pcm_hw_params,
+	.hw_free	= snd_sh_dac_pcm_hw_free,
+	.prepare	= snd_sh_dac_pcm_prepare,
+	.trigger	= snd_sh_dac_pcm_trigger,
+	.pointer	= snd_sh_dac_pcm_pointer,
+	.copy		= snd_sh_dac_pcm_copy,
+	.silence	= snd_sh_dac_pcm_silence,
+	.mmap		= snd_pcm_lib_mmap_iomem,
+};
+
+static int __devinit snd_sh_dac_pcm(struct snd_sh_dac *chip, int device)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	/* device should be always 0 for us */
+	err = snd_pcm_new(chip->card, "SH_DAC PCM", device, 1, 0, &pcm);
+	if (err < 0)
+		return err;
+
+	pcm->private_data = chip;
+	strcpy(pcm->name, "SH_DAC PCM");
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_sh_dac_pcm_ops);
+
+	/* buffer size=48K */
+	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS,
+					  snd_dma_continuous_data(GFP_KERNEL),
+							48 * 1024,
+							48 * 1024);
+
+	return 0;
+}
+/* END OF PCM INTERFACE */
+
+
+/* driver .remove  --  destructor */
+static int snd_sh_dac_remove(struct platform_device *devptr)
+{
+	snd_card_free(platform_get_drvdata(devptr));
+	platform_set_drvdata(devptr, NULL);
+
+	return 0;
+}
+
+/* free -- it has been defined by create */
+static int snd_sh_dac_free(struct snd_sh_dac *chip)
+{
+	/* release the data */
+	kfree(chip->data_buffer);
+	kfree(chip);
+
+	return 0;
+}
+
+static int snd_sh_dac_dev_free(struct snd_device *device)
+{
+	struct snd_sh_dac *chip = device->device_data;
+
+	return snd_sh_dac_free(chip);
+}
+
+static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
+{
+	struct snd_sh_dac *chip = container_of(handle, struct snd_sh_dac,
+					       hrtimer);
+	struct snd_pcm_runtime *runtime = chip->substream->runtime;
+	ssize_t b_ps = frames_to_bytes(runtime, runtime->period_size);
+
+	if (!chip->empty) {
+		sh_dac_output(*chip->buffer_begin, chip->pdata->channel);
+		chip->buffer_begin++;
+
+		chip->processed++;
+		if (chip->processed >= b_ps) {
+			chip->processed -= b_ps;
+			snd_pcm_period_elapsed(chip->substream);
+		}
+
+		if (chip->buffer_begin == (chip->data_buffer +
+					   chip->buffer_size - 1))
+			chip->buffer_begin = chip->data_buffer;
+
+		if (chip->buffer_begin == chip->buffer_end)
+			chip->empty = 1;
+
+	}
+
+	if (!chip->empty)
+		hrtimer_start(&chip->hrtimer, chip->wakeups_per_second,
+			      HRTIMER_MODE_REL);
+
+	return HRTIMER_NORESTART;
+}
+
+/* create  --  chip-specific constructor for the cards components */
+static int __devinit snd_sh_dac_create(struct snd_card *card,
+				       struct platform_device *devptr,
+				       struct snd_sh_dac **rchip)
+{
+	struct snd_sh_dac *chip;
+	int err;
+
+	static struct snd_device_ops ops = {
+		   .dev_free = snd_sh_dac_dev_free,
+	};
+
+	*rchip = NULL;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (chip == NULL)
+		return -ENOMEM;
+
+	chip->card = card;
+
+	hrtimer_init(&chip->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	chip->hrtimer.function = sh_dac_audio_timer;
+
+	dac_audio_reset(chip);
+	chip->rate = 8000;
+	dac_audio_set_rate(chip);
+
+	chip->pdata = devptr->dev.platform_data;
+
+	chip->data_buffer = kmalloc(chip->pdata->buffer_size, GFP_KERNEL);
+	if (chip->data_buffer == NULL) {
+		kfree(chip);
+		return -ENOMEM;
+	}
+
+	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+	if (err < 0) {
+		snd_sh_dac_free(chip);
+		return err;
+	}
+
+	*rchip = chip;
+
+	return 0;
+}
+
+/* driver .probe  --  constructor */
+static int __devinit snd_sh_dac_probe(struct platform_device *devptr)
+{
+	struct snd_sh_dac *chip;
+	struct snd_card *card;
+	int err;
+
+	err = snd_card_create(index, id, THIS_MODULE, 0, &card);
+	if (err < 0) {
+			snd_printk(KERN_ERR "cannot allocate the card\n");
+			return err;
+	}
+
+	err = snd_sh_dac_create(card, devptr, &chip);
+	if (err < 0)
+		goto probe_error;
+
+	err = snd_sh_dac_pcm(chip, 0);
+	if (err < 0)
+		goto probe_error;
+
+	strcpy(card->driver, "snd_sh_dac");
+	strcpy(card->shortname, "SuperH DAC audio driver");
+	printk(KERN_INFO "%s %s", card->longname, card->shortname);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto probe_error;
+
+	snd_printk("ALSA driver for SuperH DAC audio");
+
+	platform_set_drvdata(devptr, card);
+	return 0;
+
+probe_error:
+	snd_card_free(card);
+	return err;
+}
+
+/*
+ * "driver" definition
+ */
+static struct platform_driver driver = {
+	.probe	= snd_sh_dac_probe,
+	.remove = snd_sh_dac_remove,
+	.driver = {
+		.name = "dac_audio",
+	},
+};
+
+static int __init sh_dac_init(void)
+{
+	return platform_driver_register(&driver);
+}
+
+static void __exit sh_dac_exit(void)
+{
+	platform_driver_unregister(&driver);
+}
+
+module_init(sh_dac_init);
+module_exit(sh_dac_exit);
diff --git a/sound/soc/Makefile b/sound/soc/Makefile
index 0c5eac0..1470141 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -1,4 +1,4 @@
-snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o
+snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o soc-cache.o soc-utils.o
 
 obj-$(CONFIG_SND_SOC)	+= snd-soc-core.o
 obj-$(CONFIG_SND_SOC)	+= codecs/
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
index 9eb610c..9df4c68 100644
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ b/sound/soc/atmel/playpaq_wm8510.c
@@ -268,7 +268,7 @@
 #endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
 
 
-	ret = snd_soc_dai_set_pll(codec_dai, 0,
+	ret = snd_soc_dai_set_pll(codec_dai, 0, 0,
 					 clk_get_rate(CODEC_CLK), pll_out);
 	if (ret < 0) {
 		pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 885ba01..e028744 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -207,7 +207,7 @@
 	struct clk *pllb;
 	int ret;
 
-	if (!machine_is_at91sam9g20ek())
+	if (!(machine_is_at91sam9g20ek() || machine_is_at91sam9g20ek_2mmc()))
 		return -ENODEV;
 
 	/*
diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c
index 594c6c5..19e4d37 100644
--- a/sound/soc/au1x/dbdma2.c
+++ b/sound/soc/au1x/dbdma2.c
@@ -2,7 +2,7 @@
  * Au12x0/Au1550 PSC ALSA ASoC audio support.
  *
  * (c) 2007-2008 MSC Vertriebsges.m.b.H.,
- *	Manuel Lauss <mano@roarinelk.homelinux.net>
+ *	Manuel Lauss <manuel.lauss@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -333,6 +333,30 @@
 
 static int au1xpsc_pcm_probe(struct platform_device *pdev)
 {
+	if (!au1xpsc_audio_pcmdma[PCM_TX] || !au1xpsc_audio_pcmdma[PCM_RX])
+		return -ENODEV;
+
+	return 0;
+}
+
+static int au1xpsc_pcm_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+/* au1xpsc audio platform */
+struct snd_soc_platform au1xpsc_soc_platform = {
+	.name		= "au1xpsc-pcm-dbdma",
+	.probe		= au1xpsc_pcm_probe,
+	.remove		= au1xpsc_pcm_remove,
+	.pcm_ops 	= &au1xpsc_pcm_ops,
+	.pcm_new	= au1xpsc_pcm_new,
+	.pcm_free	= au1xpsc_pcm_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(au1xpsc_soc_platform);
+
+static int __devinit au1xpsc_pcm_drvprobe(struct platform_device *pdev)
+{
 	struct resource *r;
 	int ret;
 
@@ -365,7 +389,9 @@
 	}
 	(au1xpsc_audio_pcmdma[PCM_RX])->ddma_id = r->start;
 
-	return 0;
+	ret = snd_soc_register_platform(&au1xpsc_soc_platform);
+	if (!ret)
+		return ret;
 
 out2:
 	kfree(au1xpsc_audio_pcmdma[PCM_RX]);
@@ -376,10 +402,12 @@
 	return ret;
 }
 
-static int au1xpsc_pcm_remove(struct platform_device *pdev)
+static int __devexit au1xpsc_pcm_drvremove(struct platform_device *pdev)
 {
 	int i;
 
+	snd_soc_unregister_platform(&au1xpsc_soc_platform);
+
 	for (i = 0; i < 2; i++) {
 		if (au1xpsc_audio_pcmdma[i]) {
 			au1x_pcm_dbdma_free(au1xpsc_audio_pcmdma[i]);
@@ -391,32 +419,81 @@
 	return 0;
 }
 
-/* au1xpsc audio platform */
-struct snd_soc_platform au1xpsc_soc_platform = {
-	.name		= "au1xpsc-pcm-dbdma",
-	.probe		= au1xpsc_pcm_probe,
-	.remove		= au1xpsc_pcm_remove,
-	.pcm_ops 	= &au1xpsc_pcm_ops,
-	.pcm_new	= au1xpsc_pcm_new,
-	.pcm_free	= au1xpsc_pcm_free_dma_buffers,
+static struct platform_driver au1xpsc_pcm_driver = {
+	.driver	= {
+		.name	= "au1xpsc-pcm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= au1xpsc_pcm_drvprobe,
+	.remove		= __devexit_p(au1xpsc_pcm_drvremove),
 };
-EXPORT_SYMBOL_GPL(au1xpsc_soc_platform);
 
-static int __init au1xpsc_audio_dbdma_init(void)
+static int __init au1xpsc_audio_dbdma_load(void)
 {
 	au1xpsc_audio_pcmdma[PCM_TX] = NULL;
 	au1xpsc_audio_pcmdma[PCM_RX] = NULL;
-	return snd_soc_register_platform(&au1xpsc_soc_platform);
+	return platform_driver_register(&au1xpsc_pcm_driver);
 }
 
-static void __exit au1xpsc_audio_dbdma_exit(void)
+static void __exit au1xpsc_audio_dbdma_unload(void)
 {
-	snd_soc_unregister_platform(&au1xpsc_soc_platform);
+	platform_driver_unregister(&au1xpsc_pcm_driver);
 }
 
-module_init(au1xpsc_audio_dbdma_init);
-module_exit(au1xpsc_audio_dbdma_exit);
+module_init(au1xpsc_audio_dbdma_load);
+module_exit(au1xpsc_audio_dbdma_unload);
+
+
+struct platform_device *au1xpsc_pcm_add(struct platform_device *pdev)
+{
+	struct resource *res, *r;
+	struct platform_device *pd;
+	int id[2];
+	int ret;
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!r)
+		return NULL;
+	id[0] = r->start;
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!r)
+		return NULL;
+	id[1] = r->start;
+
+	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	if (!res)
+		return NULL;
+
+	res[0].start = res[0].end = id[0];
+	res[1].start = res[1].end = id[1];
+	res[0].flags = res[1].flags = IORESOURCE_DMA;
+
+	pd = platform_device_alloc("au1xpsc-pcm", -1);
+	if (!pd)
+		goto out;
+
+	pd->resource = res;
+	pd->num_resources = 2;
+
+	ret = platform_device_add(pd);
+	if (!ret)
+		return pd;
+
+	platform_device_put(pd);
+out:
+	kfree(res);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(au1xpsc_pcm_add);
+
+void au1xpsc_pcm_destroy(struct platform_device *dmapd)
+{
+	if (dmapd)
+		platform_device_unregister(dmapd);
+}
+EXPORT_SYMBOL_GPL(au1xpsc_pcm_destroy);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Au12x0/Au1550 PSC Audio DMA driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/psc-ac97.c b/sound/soc/au1x/psc-ac97.c
index a521aa9..340311d 100644
--- a/sound/soc/au1x/psc-ac97.c
+++ b/sound/soc/au1x/psc-ac97.c
@@ -61,7 +61,8 @@
 {
 	/* FIXME */
 	struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
-	unsigned short data, retry, tmo;
+	unsigned short retry, tmo;
+	unsigned long data;
 
 	au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
 	au_sync();
@@ -74,20 +75,26 @@
 			  AC97_CDC(pscdata));
 		au_sync();
 
-		tmo = 2000;
-		while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
-			&& --tmo)
-			udelay(2);
+		tmo = 20;
+		do {
+			udelay(21);
+			if (au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)
+				break;
+		} while (--tmo);
 
-		data = au_readl(AC97_CDC(pscdata)) & 0xffff;
+		data = au_readl(AC97_CDC(pscdata));
 
 		au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
 		au_sync();
 
 		mutex_unlock(&pscdata->lock);
+
+		if (reg != ((data >> 16) & 0x7f))
+			tmo = 1;	/* wrong register, try again */
+
 	} while (--retry && !tmo);
 
-	return retry ? data : 0xffff;
+	return retry ? data & 0xffff : 0xffff;
 }
 
 /* AC97 controller writes to codec register */
@@ -109,10 +116,12 @@
 			  AC97_CDC(pscdata));
 		au_sync();
 
-		tmo = 2000;
-		while ((!(au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD))
-		       && --tmo)
-			udelay(2);
+		tmo = 20;
+		do {
+			udelay(21);
+			if (au_readl(AC97_EVNT(pscdata)) & PSC_AC97EVNT_CD)
+				break;
+		} while (--tmo);
 
 		au_writel(PSC_AC97EVNT_CD, AC97_EVNT(pscdata));
 		au_sync();
@@ -195,7 +204,7 @@
 	/* FIXME */
 	struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
 	unsigned long r, ro, stat;
-	int chans, stype = SUBSTREAM_TYPE(substream);
+	int chans, t, stype = SUBSTREAM_TYPE(substream);
 
 	chans = params_channels(params);
 
@@ -237,8 +246,12 @@
 		au_sync();
 
 		/* ...wait for it... */
-		while (au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)
-			asm volatile ("nop");
+		t = 100;
+		while ((au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR) && --t)
+			msleep(1);
+
+		if (!t)
+			printk(KERN_ERR "PSC-AC97: can't disable!\n");
 
 		/* ...write config... */
 		au_writel(r, AC97_CFG(pscdata));
@@ -249,8 +262,12 @@
 		au_sync();
 
 		/* ...and wait for ready bit */
-		while (!(au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR))
-			asm volatile ("nop");
+		t = 100;
+		while ((!(au_readl(AC97_STAT(pscdata)) & PSC_AC97STAT_DR)) && --t)
+			msleep(1);
+
+		if (!t)
+			printk(KERN_ERR "PSC-AC97: can't enable!\n");
 
 		mutex_unlock(&pscdata->lock);
 
@@ -300,109 +317,12 @@
 static int au1xpsc_ac97_probe(struct platform_device *pdev,
 			      struct snd_soc_dai *dai)
 {
-	int ret;
-	struct resource *r;
-	unsigned long sel;
-
-	if (au1xpsc_ac97_workdata)
-		return -EBUSY;
-
-	au1xpsc_ac97_workdata =
-		kzalloc(sizeof(struct au1xpsc_audio_data), GFP_KERNEL);
-	if (!au1xpsc_ac97_workdata)
-		return -ENOMEM;
-
-	mutex_init(&au1xpsc_ac97_workdata->lock);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		ret = -ENODEV;
-		goto out0;
-	}
-
-	ret = -EBUSY;
-	au1xpsc_ac97_workdata->ioarea =
-		request_mem_region(r->start, r->end - r->start + 1,
-					"au1xpsc_ac97");
-	if (!au1xpsc_ac97_workdata->ioarea)
-		goto out0;
-
-	au1xpsc_ac97_workdata->mmio = ioremap(r->start, 0xffff);
-	if (!au1xpsc_ac97_workdata->mmio)
-		goto out1;
-
-	/* configuration: max dma trigger threshold, enable ac97 */
-	au1xpsc_ac97_workdata->cfg = PSC_AC97CFG_RT_FIFO8 |
-				     PSC_AC97CFG_TT_FIFO8 |
-				     PSC_AC97CFG_DE_ENABLE;
-
-	/* preserve PSC clock source set up by platform (dev.platform_data
-	 * is already occupied by soc layer)
-	 */
-	sel = au_readl(PSC_SEL(au1xpsc_ac97_workdata)) & PSC_SEL_CLK_MASK;
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_ac97_workdata));
-	au_sync();
-	au_writel(0, PSC_SEL(au1xpsc_ac97_workdata));
-	au_sync();
-	au_writel(PSC_SEL_PS_AC97MODE | sel, PSC_SEL(au1xpsc_ac97_workdata));
-	au_sync();
-	/* next up: cold reset.  Dont check for PSC-ready now since
-	 * there may not be any codec clock yet.
-	 */
-
-	return 0;
-
-out1:
-	release_resource(au1xpsc_ac97_workdata->ioarea);
-	kfree(au1xpsc_ac97_workdata->ioarea);
-out0:
-	kfree(au1xpsc_ac97_workdata);
-	au1xpsc_ac97_workdata = NULL;
-	return ret;
+	return au1xpsc_ac97_workdata ? 0 : -ENODEV;
 }
 
 static void au1xpsc_ac97_remove(struct platform_device *pdev,
 				struct snd_soc_dai *dai)
 {
-	/* disable PSC completely */
-	au_writel(0, AC97_CFG(au1xpsc_ac97_workdata));
-	au_sync();
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_ac97_workdata));
-	au_sync();
-
-	iounmap(au1xpsc_ac97_workdata->mmio);
-	release_resource(au1xpsc_ac97_workdata->ioarea);
-	kfree(au1xpsc_ac97_workdata->ioarea);
-	kfree(au1xpsc_ac97_workdata);
-	au1xpsc_ac97_workdata = NULL;
-}
-
-static int au1xpsc_ac97_suspend(struct snd_soc_dai *dai)
-{
-	/* save interesting registers and disable PSC */
-	au1xpsc_ac97_workdata->pm[0] =
-			au_readl(PSC_SEL(au1xpsc_ac97_workdata));
-
-	au_writel(0, AC97_CFG(au1xpsc_ac97_workdata));
-	au_sync();
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_ac97_workdata));
-	au_sync();
-
-	return 0;
-}
-
-static int au1xpsc_ac97_resume(struct snd_soc_dai *dai)
-{
-	/* restore PSC clock config */
-	au_writel(au1xpsc_ac97_workdata->pm[0] | PSC_SEL_PS_AC97MODE,
-			PSC_SEL(au1xpsc_ac97_workdata));
-	au_sync();
-
-	/* after this point the ac97 core will cold-reset the codec.
-	 * During cold-reset the PSC is reinitialized and the last
-	 * configuration set up in hw_params() is restored.
-	 */
-	return 0;
 }
 
 static struct snd_soc_dai_ops au1xpsc_ac97_dai_ops = {
@@ -415,8 +335,6 @@
 	.ac97_control		= 1,
 	.probe			= au1xpsc_ac97_probe,
 	.remove			= au1xpsc_ac97_remove,
-	.suspend		= au1xpsc_ac97_suspend,
-	.resume			= au1xpsc_ac97_resume,
 	.playback = {
 		.rates		= AC97_RATES,
 		.formats	= AC97_FMTS,
@@ -433,20 +351,165 @@
 };
 EXPORT_SYMBOL_GPL(au1xpsc_ac97_dai);
 
-static int __init au1xpsc_ac97_init(void)
+static int __devinit au1xpsc_ac97_drvprobe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+	unsigned long sel;
+	struct au1xpsc_audio_data *wd;
+
+	if (au1xpsc_ac97_workdata)
+		return -EBUSY;
+
+	wd = kzalloc(sizeof(struct au1xpsc_audio_data), GFP_KERNEL);
+	if (!wd)
+		return -ENOMEM;
+
+	mutex_init(&wd->lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		ret = -ENODEV;
+		goto out0;
+	}
+
+	ret = -EBUSY;
+	wd->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+					"au1xpsc_ac97");
+	if (!wd->ioarea)
+		goto out0;
+
+	wd->mmio = ioremap(r->start, 0xffff);
+	if (!wd->mmio)
+		goto out1;
+
+	/* configuration: max dma trigger threshold, enable ac97 */
+	wd->cfg = PSC_AC97CFG_RT_FIFO8 | PSC_AC97CFG_TT_FIFO8 |
+		  PSC_AC97CFG_DE_ENABLE;
+
+	/* preserve PSC clock source set up by platform	 */
+	sel = au_readl(PSC_SEL(wd)) & PSC_SEL_CLK_MASK;
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+	au_writel(0, PSC_SEL(wd));
+	au_sync();
+	au_writel(PSC_SEL_PS_AC97MODE | sel, PSC_SEL(wd));
+	au_sync();
+
+	ret = snd_soc_register_dai(&au1xpsc_ac97_dai);
+	if (ret)
+		goto out1;
+
+	wd->dmapd = au1xpsc_pcm_add(pdev);
+	if (wd->dmapd) {
+		platform_set_drvdata(pdev, wd);
+		au1xpsc_ac97_workdata = wd;	/* MDEV */
+		return 0;
+	}
+
+	snd_soc_unregister_dai(&au1xpsc_ac97_dai);
+out1:
+	release_resource(wd->ioarea);
+	kfree(wd->ioarea);
+out0:
+	kfree(wd);
+	return ret;
+}
+
+static int __devexit au1xpsc_ac97_drvremove(struct platform_device *pdev)
+{
+	struct au1xpsc_audio_data *wd = platform_get_drvdata(pdev);
+
+	if (wd->dmapd)
+		au1xpsc_pcm_destroy(wd->dmapd);
+
+	snd_soc_unregister_dai(&au1xpsc_ac97_dai);
+
+	/* disable PSC completely */
+	au_writel(0, AC97_CFG(wd));
+	au_sync();
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+
+	iounmap(wd->mmio);
+	release_resource(wd->ioarea);
+	kfree(wd->ioarea);
+	kfree(wd);
+
+	au1xpsc_ac97_workdata = NULL;	/* MDEV */
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int au1xpsc_ac97_drvsuspend(struct device *dev)
+{
+	struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
+
+	/* save interesting registers and disable PSC */
+	wd->pm[0] = au_readl(PSC_SEL(wd));
+
+	au_writel(0, AC97_CFG(wd));
+	au_sync();
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+
+	return 0;
+}
+
+static int au1xpsc_ac97_drvresume(struct device *dev)
+{
+	struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
+
+	/* restore PSC clock config */
+	au_writel(wd->pm[0] | PSC_SEL_PS_AC97MODE, PSC_SEL(wd));
+	au_sync();
+
+	/* after this point the ac97 core will cold-reset the codec.
+	 * During cold-reset the PSC is reinitialized and the last
+	 * configuration set up in hw_params() is restored.
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops au1xpscac97_pmops = {
+	.suspend	= au1xpsc_ac97_drvsuspend,
+	.resume		= au1xpsc_ac97_drvresume,
+};
+
+#define AU1XPSCAC97_PMOPS &au1xpscac97_pmops
+
+#else
+
+#define AU1XPSCAC97_PMOPS NULL
+
+#endif
+
+static struct platform_driver au1xpsc_ac97_driver = {
+	.driver	= {
+		.name	= "au1xpsc_ac97",
+		.owner	= THIS_MODULE,
+		.pm	= AU1XPSCAC97_PMOPS,
+	},
+	.probe		= au1xpsc_ac97_drvprobe,
+	.remove		= __devexit_p(au1xpsc_ac97_drvremove),
+};
+
+static int __init au1xpsc_ac97_load(void)
 {
 	au1xpsc_ac97_workdata = NULL;
-	return snd_soc_register_dai(&au1xpsc_ac97_dai);
+	return platform_driver_register(&au1xpsc_ac97_driver);
 }
 
-static void __exit au1xpsc_ac97_exit(void)
+static void __exit au1xpsc_ac97_unload(void)
 {
-	snd_soc_unregister_dai(&au1xpsc_ac97_dai);
+	platform_driver_unregister(&au1xpsc_ac97_driver);
 }
 
-module_init(au1xpsc_ac97_init);
-module_exit(au1xpsc_ac97_exit);
+module_init(au1xpsc_ac97_load);
+module_exit(au1xpsc_ac97_unload);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Au12x0/Au1550 PSC AC97 ALSA ASoC audio driver");
-MODULE_AUTHOR("Manuel Lauss <manuel.lauss@gmail.com>");
+MODULE_AUTHOR("Manuel Lauss");
+
diff --git a/sound/soc/au1x/psc-i2s.c b/sound/soc/au1x/psc-i2s.c
index bb58932..0cf2ca6 100644
--- a/sound/soc/au1x/psc-i2s.c
+++ b/sound/soc/au1x/psc-i2s.c
@@ -2,7 +2,7 @@
  * Au12x0/Au1550 PSC ALSA ASoC audio support.
  *
  * (c) 2007-2008 MSC Vertriebsges.m.b.H.,
- *	Manuel Lauss <mano@roarinelk.homelinux.net>
+ *	Manuel Lauss <manuel.lauss@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -265,106 +265,12 @@
 static int au1xpsc_i2s_probe(struct platform_device *pdev,
 			     struct snd_soc_dai *dai)
 {
-	struct resource *r;
-	unsigned long sel;
-	int ret;
-
-	if (au1xpsc_i2s_workdata)
-		return -EBUSY;
-
-	au1xpsc_i2s_workdata =
-		kzalloc(sizeof(struct au1xpsc_audio_data), GFP_KERNEL);
-	if (!au1xpsc_i2s_workdata)
-		return -ENOMEM;
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		ret = -ENODEV;
-		goto out0;
-	}
-
-	ret = -EBUSY;
-	au1xpsc_i2s_workdata->ioarea =
-		request_mem_region(r->start, r->end - r->start + 1,
-					"au1xpsc_i2s");
-	if (!au1xpsc_i2s_workdata->ioarea)
-		goto out0;
-
-	au1xpsc_i2s_workdata->mmio = ioremap(r->start, 0xffff);
-	if (!au1xpsc_i2s_workdata->mmio)
-		goto out1;
-
-	/* preserve PSC clock source set up by platform (dev.platform_data
-	 * is already occupied by soc layer)
-	 */
-	sel = au_readl(PSC_SEL(au1xpsc_i2s_workdata)) & PSC_SEL_CLK_MASK;
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_i2s_workdata));
-	au_sync();
-	au_writel(PSC_SEL_PS_I2SMODE | sel, PSC_SEL(au1xpsc_i2s_workdata));
-	au_writel(0, I2S_CFG(au1xpsc_i2s_workdata));
-	au_sync();
-
-	/* preconfigure: set max rx/tx fifo depths */
-	au1xpsc_i2s_workdata->cfg |=
-			PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8;
-
-	/* don't wait for I2S core to become ready now; clocks may not
-	 * be running yet; depending on clock input for PSC a wait might
-	 * time out.
-	 */
-
-	return 0;
-
-out1:
-	release_resource(au1xpsc_i2s_workdata->ioarea);
-	kfree(au1xpsc_i2s_workdata->ioarea);
-out0:
-	kfree(au1xpsc_i2s_workdata);
-	au1xpsc_i2s_workdata = NULL;
-	return ret;
+	return 	au1xpsc_i2s_workdata ? 0 : -ENODEV;
 }
 
 static void au1xpsc_i2s_remove(struct platform_device *pdev,
 			       struct snd_soc_dai *dai)
 {
-	au_writel(0, I2S_CFG(au1xpsc_i2s_workdata));
-	au_sync();
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_i2s_workdata));
-	au_sync();
-
-	iounmap(au1xpsc_i2s_workdata->mmio);
-	release_resource(au1xpsc_i2s_workdata->ioarea);
-	kfree(au1xpsc_i2s_workdata->ioarea);
-	kfree(au1xpsc_i2s_workdata);
-	au1xpsc_i2s_workdata = NULL;
-}
-
-static int au1xpsc_i2s_suspend(struct snd_soc_dai *cpu_dai)
-{
-	/* save interesting register and disable PSC */
-	au1xpsc_i2s_workdata->pm[0] =
-		au_readl(PSC_SEL(au1xpsc_i2s_workdata));
-
-	au_writel(0, I2S_CFG(au1xpsc_i2s_workdata));
-	au_sync();
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_i2s_workdata));
-	au_sync();
-
-	return 0;
-}
-
-static int au1xpsc_i2s_resume(struct snd_soc_dai *cpu_dai)
-{
-	/* select I2S mode and PSC clock */
-	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_i2s_workdata));
-	au_sync();
-	au_writel(0, PSC_SEL(au1xpsc_i2s_workdata));
-	au_sync();
-	au_writel(au1xpsc_i2s_workdata->pm[0],
-			PSC_SEL(au1xpsc_i2s_workdata));
-	au_sync();
-
-	return 0;
 }
 
 static struct snd_soc_dai_ops au1xpsc_i2s_dai_ops = {
@@ -377,8 +283,6 @@
 	.name			= "au1xpsc_i2s",
 	.probe			= au1xpsc_i2s_probe,
 	.remove			= au1xpsc_i2s_remove,
-	.suspend		= au1xpsc_i2s_suspend,
-	.resume			= au1xpsc_i2s_resume,
 	.playback = {
 		.rates		= AU1XPSC_I2S_RATES,
 		.formats	= AU1XPSC_I2S_FMTS,
@@ -395,20 +299,167 @@
 };
 EXPORT_SYMBOL(au1xpsc_i2s_dai);
 
-static int __init au1xpsc_i2s_init(void)
+static int __init au1xpsc_i2s_drvprobe(struct platform_device *pdev)
+{
+	struct resource *r;
+	unsigned long sel;
+	int ret;
+	struct au1xpsc_audio_data *wd;
+
+	if (au1xpsc_i2s_workdata)
+		return -EBUSY;
+
+	wd = kzalloc(sizeof(struct au1xpsc_audio_data), GFP_KERNEL);
+	if (!wd)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r) {
+		ret = -ENODEV;
+		goto out0;
+	}
+
+	ret = -EBUSY;
+	wd->ioarea = request_mem_region(r->start, r->end - r->start + 1,
+					"au1xpsc_i2s");
+	if (!wd->ioarea)
+		goto out0;
+
+	wd->mmio = ioremap(r->start, 0xffff);
+	if (!wd->mmio)
+		goto out1;
+
+	/* preserve PSC clock source set up by platform (dev.platform_data
+	 * is already occupied by soc layer)
+	 */
+	sel = au_readl(PSC_SEL(wd)) & PSC_SEL_CLK_MASK;
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+	au_writel(PSC_SEL_PS_I2SMODE | sel, PSC_SEL(wd));
+	au_writel(0, I2S_CFG(wd));
+	au_sync();
+
+	/* preconfigure: set max rx/tx fifo depths */
+	wd->cfg |= PSC_I2SCFG_RT_FIFO8 | PSC_I2SCFG_TT_FIFO8;
+
+	/* don't wait for I2S core to become ready now; clocks may not
+	 * be running yet; depending on clock input for PSC a wait might
+	 * time out.
+	 */
+
+	ret = snd_soc_register_dai(&au1xpsc_i2s_dai);
+	if (ret)
+		goto out1;
+
+	/* finally add the DMA device for this PSC */
+	wd->dmapd = au1xpsc_pcm_add(pdev);
+	if (wd->dmapd) {
+		platform_set_drvdata(pdev, wd);
+		au1xpsc_i2s_workdata = wd;
+		return 0;
+	}
+
+	snd_soc_unregister_dai(&au1xpsc_i2s_dai);
+out1:
+	release_resource(wd->ioarea);
+	kfree(wd->ioarea);
+out0:
+	kfree(wd);
+	return ret;
+}
+
+static int __devexit au1xpsc_i2s_drvremove(struct platform_device *pdev)
+{
+	struct au1xpsc_audio_data *wd = platform_get_drvdata(pdev);
+
+	if (wd->dmapd)
+		au1xpsc_pcm_destroy(wd->dmapd);
+
+	snd_soc_unregister_dai(&au1xpsc_i2s_dai);
+
+	au_writel(0, I2S_CFG(wd));
+	au_sync();
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+
+	iounmap(wd->mmio);
+	release_resource(wd->ioarea);
+	kfree(wd->ioarea);
+	kfree(wd);
+
+	au1xpsc_i2s_workdata = NULL;	/* MDEV */
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int au1xpsc_i2s_drvsuspend(struct device *dev)
+{
+	struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
+
+	/* save interesting register and disable PSC */
+	wd->pm[0] = au_readl(PSC_SEL(wd));
+
+	au_writel(0, I2S_CFG(wd));
+	au_sync();
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+
+	return 0;
+}
+
+static int au1xpsc_i2s_drvresume(struct device *dev)
+{
+	struct au1xpsc_audio_data *wd = dev_get_drvdata(dev);
+
+	/* select I2S mode and PSC clock */
+	au_writel(PSC_CTRL_DISABLE, PSC_CTRL(wd));
+	au_sync();
+	au_writel(0, PSC_SEL(wd));
+	au_sync();
+	au_writel(wd->pm[0], PSC_SEL(wd));
+	au_sync();
+
+	return 0;
+}
+
+static struct dev_pm_ops au1xpsci2s_pmops = {
+	.suspend	= au1xpsc_i2s_drvsuspend,
+	.resume		= au1xpsc_i2s_drvresume,
+};
+
+#define AU1XPSCI2S_PMOPS &au1xpsci2s_pmops
+
+#else
+
+#define AU1XPSCI2S_PMOPS NULL
+
+#endif
+
+static struct platform_driver au1xpsc_i2s_driver = {
+	.driver		= {
+		.name	= "au1xpsc_i2s",
+		.owner	= THIS_MODULE,
+		.pm	= AU1XPSCI2S_PMOPS,
+	},
+	.probe		= au1xpsc_i2s_drvprobe,
+	.remove		= __devexit_p(au1xpsc_i2s_drvremove),
+};
+
+static int __init au1xpsc_i2s_load(void)
 {
 	au1xpsc_i2s_workdata = NULL;
-	return snd_soc_register_dai(&au1xpsc_i2s_dai);
+	return platform_driver_register(&au1xpsc_i2s_driver);
 }
 
-static void __exit au1xpsc_i2s_exit(void)
+static void __exit au1xpsc_i2s_unload(void)
 {
-	snd_soc_unregister_dai(&au1xpsc_i2s_dai);
+	platform_driver_unregister(&au1xpsc_i2s_driver);
 }
 
-module_init(au1xpsc_i2s_init);
-module_exit(au1xpsc_i2s_exit);
+module_init(au1xpsc_i2s_load);
+module_exit(au1xpsc_i2s_unload);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Au12x0/Au1550 PSC I2S ALSA ASoC audio driver");
-MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/sound/soc/au1x/psc.h b/sound/soc/au1x/psc.h
index 3f474e8..32d3807 100644
--- a/sound/soc/au1x/psc.h
+++ b/sound/soc/au1x/psc.h
@@ -2,7 +2,7 @@
  * Au12x0/Au1550 PSC ALSA ASoC audio support.
  *
  * (c) 2007-2008 MSC Vertriebsges.m.b.H.,
- *	Manuel Lauss <mano@roarinelk.homelinux.net>
+ *	Manuel Lauss <manuel.lauss@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,6 +21,10 @@
 extern struct snd_soc_platform au1xpsc_soc_platform;
 extern struct snd_ac97_bus_ops soc_ac97_ops;
 
+/* DBDMA helpers */
+extern struct platform_device *au1xpsc_pcm_add(struct platform_device *pdev);
+extern void au1xpsc_pcm_destroy(struct platform_device *dmapd);
+
 struct au1xpsc_audio_data {
 	void __iomem *mmio;
 
@@ -30,6 +34,7 @@
 	unsigned long pm[2];
 	struct resource *ioarea;
 	struct mutex lock;
+	struct platform_device *dmapd;
 };
 
 #define PCM_TX	0
diff --git a/sound/soc/blackfin/bf5xx-ad1836.c b/sound/soc/blackfin/bf5xx-ad1836.c
index cd361e3..0f45a3f 100644
--- a/sound/soc/blackfin/bf5xx-ad1836.c
+++ b/sound/soc/blackfin/bf5xx-ad1836.c
@@ -52,6 +52,7 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	unsigned int channel_map[] = {0, 4, 1, 5, 2, 6, 3, 7};
 	int ret = 0;
 	/* set cpu DAI configuration */
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
@@ -65,6 +66,12 @@
 	if (ret < 0)
 		return ret;
 
+	/* set cpu DAI channel mapping */
+	ret = snd_soc_dai_set_channel_map(cpu_dai, ARRAY_SIZE(channel_map),
+		channel_map, ARRAY_SIZE(channel_map), channel_map);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
diff --git a/sound/soc/blackfin/bf5xx-ad1938.c b/sound/soc/blackfin/bf5xx-ad1938.c
index 08269e9..2ef1e50 100644
--- a/sound/soc/blackfin/bf5xx-ad1938.c
+++ b/sound/soc/blackfin/bf5xx-ad1938.c
@@ -61,6 +61,7 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	unsigned int channel_map[] = {0, 1, 2, 3, 4, 5, 6, 7};
 	int ret = 0;
 	/* set cpu DAI configuration */
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
@@ -75,7 +76,13 @@
 		return ret;
 
 	/* set codec DAI slots, 8 channels, all channels are enabled */
-	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xFF, 8);
+	ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xFF, 0xFF, 8, 32);
+	if (ret < 0)
+		return ret;
+
+	/* set cpu DAI channel mapping */
+	ret = snd_soc_dai_set_channel_map(cpu_dai, ARRAY_SIZE(channel_map),
+		channel_map, ARRAY_SIZE(channel_map), channel_map);
 	if (ret < 0)
 		return ret;
 
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c
index 084b688..3e6ada0 100644
--- a/sound/soc/blackfin/bf5xx-i2s.c
+++ b/sound/soc/blackfin/bf5xx-i2s.c
@@ -49,7 +49,6 @@
 	u16 rcr1;
 	u16 tcr2;
 	u16 rcr2;
-	int counter;
 	int configured;
 };
 
@@ -133,16 +132,6 @@
 	return ret;
 }
 
-static int bf5xx_i2s_startup(struct snd_pcm_substream *substream,
-			     struct snd_soc_dai *dai)
-{
-	pr_debug("%s enter\n", __func__);
-
-	/*this counter is used for counting how many pcm streams are opened*/
-	bf5xx_i2s.counter++;
-	return 0;
-}
-
 static int bf5xx_i2s_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params,
 				struct snd_soc_dai *dai)
@@ -201,9 +190,8 @@
 			       struct snd_soc_dai *dai)
 {
 	pr_debug("%s enter\n", __func__);
-	bf5xx_i2s.counter--;
 	/* No active stream, SPORT is allowed to be configured again. */
-	if (!bf5xx_i2s.counter)
+	if (!dai->active)
 		bf5xx_i2s.configured = 0;
 }
 
@@ -284,7 +272,6 @@
 	SNDRV_PCM_FMTBIT_S32_LE)
 
 static struct snd_soc_dai_ops bf5xx_i2s_dai_ops = {
-	.startup	= bf5xx_i2s_startup,
 	.shutdown	= bf5xx_i2s_shutdown,
 	.hw_params	= bf5xx_i2s_hw_params,
 	.set_fmt	= bf5xx_i2s_set_dai_fmt,
diff --git a/sound/soc/blackfin/bf5xx-tdm-pcm.c b/sound/soc/blackfin/bf5xx-tdm-pcm.c
index ccb5e82..a8c73cb 100644
--- a/sound/soc/blackfin/bf5xx-tdm-pcm.c
+++ b/sound/soc/blackfin/bf5xx-tdm-pcm.c
@@ -43,7 +43,7 @@
 #include "bf5xx-tdm.h"
 #include "bf5xx-sport.h"
 
-#define PCM_BUFFER_MAX  0x10000
+#define PCM_BUFFER_MAX  0x8000
 #define FRAGMENT_SIZE_MIN  (4*1024)
 #define FRAGMENTS_MIN  2
 #define FRAGMENTS_MAX  32
@@ -177,6 +177,9 @@
 static int bf5xx_pcm_copy(struct snd_pcm_substream *substream, int channel,
 	snd_pcm_uframes_t pos, void *buf, snd_pcm_uframes_t count)
 {
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct sport_device *sport = runtime->private_data;
+	struct bf5xx_tdm_port *tdm_port = sport->private_data;
 	unsigned int *src;
 	unsigned int *dst;
 	int i;
@@ -188,7 +191,7 @@
 		dst += pos * 8;
 		while (count--) {
 			for (i = 0; i < substream->runtime->channels; i++)
-				*(dst + i) = *src++;
+				*(dst + tdm_port->tx_map[i]) = *src++;
 			dst += 8;
 		}
 	} else {
@@ -198,7 +201,7 @@
 		src += pos * 8;
 		while (count--) {
 			for (i = 0; i < substream->runtime->channels; i++)
-				*dst++ = *(src+i);
+				*dst++ = *(src + tdm_port->rx_map[i]);
 			src += 8;
 		}
 	}
diff --git a/sound/soc/blackfin/bf5xx-tdm.c b/sound/soc/blackfin/bf5xx-tdm.c
index ff546e9..4b36012 100644
--- a/sound/soc/blackfin/bf5xx-tdm.c
+++ b/sound/soc/blackfin/bf5xx-tdm.c
@@ -46,14 +46,6 @@
 #include "bf5xx-sport.h"
 #include "bf5xx-tdm.h"
 
-struct bf5xx_tdm_port {
-	u16 tcr1;
-	u16 rcr1;
-	u16 tcr2;
-	u16 rcr2;
-	int configured;
-};
-
 static struct bf5xx_tdm_port bf5xx_tdm;
 static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
 
@@ -181,6 +173,40 @@
 		bf5xx_tdm.configured = 0;
 }
 
+static int bf5xx_tdm_set_channel_map(struct snd_soc_dai *dai,
+		unsigned int tx_num, unsigned int *tx_slot,
+		unsigned int rx_num, unsigned int *rx_slot)
+{
+	int i;
+	unsigned int slot;
+	unsigned int tx_mapped = 0, rx_mapped = 0;
+
+	if ((tx_num > BFIN_TDM_DAI_MAX_SLOTS) ||
+			(rx_num > BFIN_TDM_DAI_MAX_SLOTS))
+		return -EINVAL;
+
+	for (i = 0; i < tx_num; i++) {
+		slot = tx_slot[i];
+		if ((slot < BFIN_TDM_DAI_MAX_SLOTS) &&
+				(!(tx_mapped & (1 << slot)))) {
+			bf5xx_tdm.tx_map[i] = slot;
+			tx_mapped |= 1 << slot;
+		} else
+			return -EINVAL;
+	}
+	for (i = 0; i < rx_num; i++) {
+		slot = rx_slot[i];
+		if ((slot < BFIN_TDM_DAI_MAX_SLOTS) &&
+				(!(rx_mapped & (1 << slot)))) {
+			bf5xx_tdm.rx_map[i] = slot;
+			rx_mapped |= 1 << slot;
+		} else
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_PM
 static int bf5xx_tdm_suspend(struct snd_soc_dai *dai)
 {
@@ -235,6 +261,7 @@
 	.hw_params      = bf5xx_tdm_hw_params,
 	.set_fmt        = bf5xx_tdm_set_dai_fmt,
 	.shutdown       = bf5xx_tdm_shutdown,
+	.set_channel_map   = bf5xx_tdm_set_channel_map,
 };
 
 struct snd_soc_dai bf5xx_tdm_dai = {
@@ -300,6 +327,8 @@
 		pr_err("Failed to register DAI: %d\n", ret);
 		goto sport_config_err;
 	}
+
+	sport_handle->private_data = &bf5xx_tdm;
 	return 0;
 
 sport_config_err:
diff --git a/sound/soc/blackfin/bf5xx-tdm.h b/sound/soc/blackfin/bf5xx-tdm.h
index 618ec3d..04189a1 100644
--- a/sound/soc/blackfin/bf5xx-tdm.h
+++ b/sound/soc/blackfin/bf5xx-tdm.h
@@ -9,6 +9,17 @@
 #ifndef _BF5XX_TDM_H
 #define _BF5XX_TDM_H
 
+#define BFIN_TDM_DAI_MAX_SLOTS 8
+struct bf5xx_tdm_port {
+	u16 tcr1;
+	u16 rcr1;
+	u16 tcr2;
+	u16 rcr2;
+	unsigned int tx_map[BFIN_TDM_DAI_MAX_SLOTS];
+	unsigned int rx_map[BFIN_TDM_DAI_MAX_SLOTS];
+	int configured;
+};
+
 extern struct snd_soc_dai bf5xx_tdm_dai;
 
 #endif
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 0edca93..52b005f 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -15,10 +15,12 @@
 	select SND_SOC_AD1836 if SPI_MASTER
 	select SND_SOC_AD1938 if SPI_MASTER
 	select SND_SOC_AD1980 if SND_SOC_AC97_BUS
+	select SND_SOC_ADS117X
 	select SND_SOC_AD73311 if I2C
 	select SND_SOC_AK4104 if SPI_MASTER
 	select SND_SOC_AK4535 if I2C
 	select SND_SOC_AK4642 if I2C
+	select SND_SOC_AK4671 if I2C
 	select SND_SOC_CS4270 if I2C
 	select SND_SOC_MAX9877 if I2C
 	select SND_SOC_PCM3008
@@ -28,6 +30,8 @@
 	select SND_SOC_TLV320AIC23 if I2C
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
 	select SND_SOC_TLV320AIC3X if I2C
+	select SND_SOC_TPA6130A2 if I2C
+	select SND_SOC_TLV320DAC33 if I2C
 	select SND_SOC_TWL4030 if TWL4030_CORE
 	select SND_SOC_UDA134X
 	select SND_SOC_UDA1380 if I2C
@@ -36,6 +40,8 @@
 	select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8523 if I2C
 	select SND_SOC_WM8580 if I2C
+	select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI
+	select SND_SOC_WM8727
 	select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI
@@ -86,6 +92,9 @@
 
 config SND_SOC_AD73311
 	tristate
+	
+config SND_SOC_ADS117X
+	tristate
 
 config SND_SOC_AK4104
 	tristate
@@ -96,6 +105,9 @@
 config SND_SOC_AK4642
 	tristate
 
+config SND_SOC_AK4671
+	tristate
+
 # Cirrus Logic CS4270 Codec
 config SND_SOC_CS4270
 	tristate
@@ -136,7 +148,11 @@
 config SND_SOC_TLV320AIC3X
 	tristate
 
+config SND_SOC_TLV320DAC33
+	tristate
+
 config SND_SOC_TWL4030
+	select TWL4030_CODEC
 	tristate
 
 config SND_SOC_UDA134X
@@ -160,6 +176,12 @@
 config SND_SOC_WM8580
 	tristate
 
+config SND_SOC_WM8711
+	tristate
+
+config SND_SOC_WM8727
+	tristate
+
 config SND_SOC_WM8728
 	tristate
 
@@ -220,3 +242,6 @@
 # Amp
 config SND_SOC_MAX9877
 	tristate
+
+config SND_SOC_TPA6130A2
+	tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index fb4af28..dbaecb1 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -3,9 +3,11 @@
 snd-soc-ad1938-objs := ad1938.o
 snd-soc-ad1980-objs := ad1980.o
 snd-soc-ad73311-objs := ad73311.o
+snd-soc-ads117x-objs := ads117x.o
 snd-soc-ak4104-objs := ak4104.o
 snd-soc-ak4535-objs := ak4535.o
 snd-soc-ak4642-objs := ak4642.o
+snd-soc-ak4671-objs := ak4671.o
 snd-soc-cs4270-objs := cs4270.o
 snd-soc-cx20442-objs := cx20442.o
 snd-soc-l3-objs := l3.o
@@ -16,6 +18,7 @@
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
+snd-soc-tlv320dac33-objs := tlv320dac33.o
 snd-soc-twl4030-objs := twl4030.o
 snd-soc-uda134x-objs := uda134x.o
 snd-soc-uda1380-objs := uda1380.o
@@ -24,6 +27,8 @@
 snd-soc-wm8510-objs := wm8510.o
 snd-soc-wm8523-objs := wm8523.o
 snd-soc-wm8580-objs := wm8580.o
+snd-soc-wm8711-objs := wm8711.o
+snd-soc-wm8727-objs := wm8727.o
 snd-soc-wm8728-objs := wm8728.o
 snd-soc-wm8731-objs := wm8731.o
 snd-soc-wm8750-objs := wm8750.o
@@ -47,15 +52,18 @@
 
 # Amp
 snd-soc-max9877-objs := max9877.o
+snd-soc-tpa6130a2-objs := tpa6130a2.o
 
 obj-$(CONFIG_SND_SOC_AC97_CODEC)	+= snd-soc-ac97.o
 obj-$(CONFIG_SND_SOC_AD1836)	+= snd-soc-ad1836.o
 obj-$(CONFIG_SND_SOC_AD1938)	+= snd-soc-ad1938.o
 obj-$(CONFIG_SND_SOC_AD1980)	+= snd-soc-ad1980.o
 obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
+obj-$(CONFIG_SND_SOC_ADS117X)	+= snd-soc-ads117x.o
 obj-$(CONFIG_SND_SOC_AK4104)	+= snd-soc-ak4104.o
 obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_AK4642)	+= snd-soc-ak4642.o
+obj-$(CONFIG_SND_SOC_AK4671)	+= snd-soc-ak4671.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
 obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
 obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
@@ -66,6 +74,7 @@
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
+obj-$(CONFIG_SND_SOC_TLV320DAC33)	+= snd-soc-tlv320dac33.o
 obj-$(CONFIG_SND_SOC_TWL4030)	+= snd-soc-twl4030.o
 obj-$(CONFIG_SND_SOC_UDA134X)	+= snd-soc-uda134x.o
 obj-$(CONFIG_SND_SOC_UDA1380)	+= snd-soc-uda1380.o
@@ -74,6 +83,8 @@
 obj-$(CONFIG_SND_SOC_WM8510)	+= snd-soc-wm8510.o
 obj-$(CONFIG_SND_SOC_WM8523)	+= snd-soc-wm8523.o
 obj-$(CONFIG_SND_SOC_WM8580)	+= snd-soc-wm8580.o
+obj-$(CONFIG_SND_SOC_WM8711)	+= snd-soc-wm8711.o
+obj-$(CONFIG_SND_SOC_WM8727)	+= snd-soc-wm8727.o
 obj-$(CONFIG_SND_SOC_WM8728)	+= snd-soc-wm8728.o
 obj-$(CONFIG_SND_SOC_WM8731)	+= snd-soc-wm8731.o
 obj-$(CONFIG_SND_SOC_WM8750)	+= snd-soc-wm8750.o
@@ -97,3 +108,4 @@
 
 # Amp
 obj-$(CONFIG_SND_SOC_MAX9877)	+= snd-soc-max9877.o
+obj-$(CONFIG_SND_SOC_TPA6130A2)	+= snd-soc-tpa6130a2.o
diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c
index 932299b..69bd0ac 100644
--- a/sound/soc/codecs/ac97.c
+++ b/sound/soc/codecs/ac97.c
@@ -117,9 +117,6 @@
 	if (ret < 0)
 		goto bus_err;
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0)
-		goto bus_err;
 	return 0;
 
 bus_err:
diff --git a/sound/soc/codecs/ad1836.c b/sound/soc/codecs/ad1836.c
index c48485f..2c18e3d 100644
--- a/sound/soc/codecs/ad1836.c
+++ b/sound/soc/codecs/ad1836.c
@@ -385,19 +385,7 @@
 	snd_soc_dapm_new_controls(codec, ad1836_dapm_widgets,
 				  ARRAY_SIZE(ad1836_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
-	snd_soc_dapm_new_widgets(codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
-
-	return ret;
-
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
diff --git a/sound/soc/codecs/ad1938.c b/sound/soc/codecs/ad1938.c
index 34b30ef..5d48918 100644
--- a/sound/soc/codecs/ad1938.c
+++ b/sound/soc/codecs/ad1938.c
@@ -592,21 +592,9 @@
 	snd_soc_dapm_new_controls(codec, ad1938_dapm_widgets,
 				  ARRAY_SIZE(ad1938_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
-	snd_soc_dapm_new_widgets(codec);
 
 	ad1938_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
-
-	return ret;
-
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c
index d7440a9..39c0f758 100644
--- a/sound/soc/codecs/ad1980.c
+++ b/sound/soc/codecs/ad1980.c
@@ -257,11 +257,6 @@
 
 	snd_soc_add_controls(codec, ad1980_snd_ac97_controls,
 				ARRAY_SIZE(ad1980_snd_ac97_controls));
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "ad1980: failed to register card\n");
-		goto reset_err;
-	}
 
 	return 0;
 
diff --git a/sound/soc/codecs/ad73311.c b/sound/soc/codecs/ad73311.c
index e61dac5..d2fcc60 100644
--- a/sound/soc/codecs/ad73311.c
+++ b/sound/soc/codecs/ad73311.c
@@ -64,16 +64,8 @@
 		goto pcm_err;
 	}
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "ad73311: failed to register card\n");
-		goto register_err;
-	}
-
 	return ret;
 
-register_err:
-	snd_soc_free_pcms(socdev);
 pcm_err:
 	kfree(socdev->card->codec);
 	socdev->card->codec = NULL;
diff --git a/sound/soc/codecs/ads117x.c b/sound/soc/codecs/ads117x.c
new file mode 100644
index 0000000..cc96411
--- /dev/null
+++ b/sound/soc/codecs/ads117x.c
@@ -0,0 +1,123 @@
+/*
+ * ads117x.c  --  Driver for ads1174/8 ADC chips
+ *
+ * Copyright 2009 ShotSpotter Inc.
+ * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "ads117x.h"
+
+#define ADS117X_RATES (SNDRV_PCM_RATE_8000_48000)
+
+#define ADS117X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE)
+
+struct snd_soc_dai ads117x_dai = {
+/* ADC */
+	.name = "ADS117X ADC",
+	.id = 1,
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 32,
+		.rates = ADS117X_RATES,
+		.formats = ADS117X_FORMATS,},
+};
+EXPORT_SYMBOL_GPL(ads117x_dai);
+
+static int ads117x_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret;
+
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+
+	socdev->card->codec = codec;
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+	codec->name = "ADS117X";
+	codec->owner = THIS_MODULE;
+	codec->dai = &ads117x_dai;
+	codec->num_dai = 1;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "ads117x: failed to create pcms\n");
+		kfree(codec);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads117x_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	snd_soc_free_pcms(socdev);
+	kfree(codec);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ads117x = {
+	.probe =	ads117x_probe,
+	.remove =	ads117x_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ads117x);
+
+static __devinit int ads117x_platform_probe(struct platform_device *pdev)
+{
+	ads117x_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&ads117x_dai);
+}
+
+static int __devexit ads117x_platform_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&ads117x_dai);
+	return 0;
+}
+
+static struct platform_driver ads117x_codec_driver = {
+	.driver = {
+			.name = "ads117x",
+			.owner = THIS_MODULE,
+	},
+
+	.probe = ads117x_platform_probe,
+	.remove = __devexit_p(ads117x_platform_remove),
+};
+
+static int __init ads117x_init(void)
+{
+	return platform_driver_register(&ads117x_codec_driver);
+}
+module_init(ads117x_init);
+
+static void __exit ads117x_exit(void)
+{
+	platform_driver_unregister(&ads117x_codec_driver);
+}
+module_exit(ads117x_exit);
+
+MODULE_DESCRIPTION("ASoC ads117x driver");
+MODULE_AUTHOR("Graeme Gregory");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ads117x.h b/sound/soc/codecs/ads117x.h
new file mode 100644
index 0000000..dbcf50e
--- /dev/null
+++ b/sound/soc/codecs/ads117x.h
@@ -0,0 +1,13 @@
+/*
+ * ads117x.h  --  Driver for ads1174/8 ADC chips
+ *
+ * Copyright 2009 ShotSpotter Inc.
+ * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+extern struct snd_soc_dai ads117x_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ads117x;
diff --git a/sound/soc/codecs/ak4104.c b/sound/soc/codecs/ak4104.c
index 4d47bc4..3a14c6f 100644
--- a/sound/soc/codecs/ak4104.c
+++ b/sound/soc/codecs/ak4104.c
@@ -313,14 +313,6 @@
 		return ret;
 	}
 
-	/* Register the socdev */
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card\n");
-		snd_soc_free_pcms(socdev);
-		return ret;
-	}
-
 	return 0;
 }
 
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index 0abec0d..ff96656 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -294,7 +294,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -485,17 +484,9 @@
 	snd_soc_add_controls(codec, ak4535_snd_controls,
 				ARRAY_SIZE(ak4535_snd_controls));
 	ak4535_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "ak4535: failed to register card\n");
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	kfree(codec->reg_cache);
 
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c
index e057c7b..b69861d 100644
--- a/sound/soc/codecs/ak4642.c
+++ b/sound/soc/codecs/ak4642.c
@@ -442,18 +442,9 @@
 		goto pcm_err;
 	}
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "ak4642: failed to register card\n");
-		goto card_err;
-	}
-
 	dev_info(&pdev->dev, "AK4642 Audio Codec %s", AK4642_VERSION);
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 
diff --git a/sound/soc/codecs/ak4671.c b/sound/soc/codecs/ak4671.c
new file mode 100644
index 0000000..82fca28
--- /dev/null
+++ b/sound/soc/codecs/ak4671.c
@@ -0,0 +1,815 @@
+/*
+ * ak4671.c  --  audio driver for AK4671
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "ak4671.h"
+
+static struct snd_soc_codec *ak4671_codec;
+
+/* codec private data */
+struct ak4671_priv {
+	struct snd_soc_codec codec;
+	u8 reg_cache[AK4671_CACHEREGNUM];
+};
+
+/* ak4671 register cache & default register settings */
+static const u8 ak4671_reg[AK4671_CACHEREGNUM] = {
+	0x00,	/* AK4671_AD_DA_POWER_MANAGEMENT	(0x00)	*/
+	0xf6,	/* AK4671_PLL_MODE_SELECT0		(0x01)	*/
+	0x00,	/* AK4671_PLL_MODE_SELECT1		(0x02)	*/
+	0x02,	/* AK4671_FORMAT_SELECT			(0x03)	*/
+	0x00,	/* AK4671_MIC_SIGNAL_SELECT		(0x04)	*/
+	0x55,	/* AK4671_MIC_AMP_GAIN			(0x05)	*/
+	0x00,	/* AK4671_MIXING_POWER_MANAGEMENT0	(0x06)	*/
+	0x00,	/* AK4671_MIXING_POWER_MANAGEMENT1	(0x07)	*/
+	0xb5,	/* AK4671_OUTPUT_VOLUME_CONTROL		(0x08)	*/
+	0x00,	/* AK4671_LOUT1_SIGNAL_SELECT		(0x09)	*/
+	0x00,	/* AK4671_ROUT1_SIGNAL_SELECT		(0x0a)	*/
+	0x00,	/* AK4671_LOUT2_SIGNAL_SELECT		(0x0b)	*/
+	0x00,	/* AK4671_ROUT2_SIGNAL_SELECT		(0x0c)	*/
+	0x00,	/* AK4671_LOUT3_SIGNAL_SELECT		(0x0d)	*/
+	0x00,	/* AK4671_ROUT3_SIGNAL_SELECT		(0x0e)	*/
+	0x00,	/* AK4671_LOUT1_POWER_MANAGERMENT	(0x0f)	*/
+	0x00,	/* AK4671_LOUT2_POWER_MANAGERMENT	(0x10)	*/
+	0x80,	/* AK4671_LOUT3_POWER_MANAGERMENT	(0x11)	*/
+	0x91,	/* AK4671_LCH_INPUT_VOLUME_CONTROL	(0x12)	*/
+	0x91,	/* AK4671_RCH_INPUT_VOLUME_CONTROL	(0x13)	*/
+	0xe1,	/* AK4671_ALC_REFERENCE_SELECT		(0x14)	*/
+	0x00,	/* AK4671_DIGITAL_MIXING_CONTROL	(0x15)	*/
+	0x00,	/* AK4671_ALC_TIMER_SELECT		(0x16)	*/
+	0x00,	/* AK4671_ALC_MODE_CONTROL		(0x17)	*/
+	0x02,	/* AK4671_MODE_CONTROL1			(0x18)	*/
+	0x01,	/* AK4671_MODE_CONTROL2			(0x19)	*/
+	0x18,	/* AK4671_LCH_OUTPUT_VOLUME_CONTROL	(0x1a)	*/
+	0x18,	/* AK4671_RCH_OUTPUT_VOLUME_CONTROL	(0x1b)	*/
+	0x00,	/* AK4671_SIDETONE_A_CONTROL		(0x1c)	*/
+	0x02,	/* AK4671_DIGITAL_FILTER_SELECT		(0x1d)	*/
+	0x00,	/* AK4671_FIL3_COEFFICIENT0		(0x1e)	*/
+	0x00,	/* AK4671_FIL3_COEFFICIENT1		(0x1f)	*/
+	0x00,	/* AK4671_FIL3_COEFFICIENT2		(0x20)	*/
+	0x00,	/* AK4671_FIL3_COEFFICIENT3		(0x21)	*/
+	0x00,	/* AK4671_EQ_COEFFICIENT0		(0x22)	*/
+	0x00,	/* AK4671_EQ_COEFFICIENT1		(0x23)	*/
+	0x00,	/* AK4671_EQ_COEFFICIENT2		(0x24)	*/
+	0x00,	/* AK4671_EQ_COEFFICIENT3		(0x25)	*/
+	0x00,	/* AK4671_EQ_COEFFICIENT4		(0x26)	*/
+	0x00,	/* AK4671_EQ_COEFFICIENT5		(0x27)	*/
+	0xa9,	/* AK4671_FIL1_COEFFICIENT0		(0x28)	*/
+	0x1f,	/* AK4671_FIL1_COEFFICIENT1		(0x29)	*/
+	0xad,	/* AK4671_FIL1_COEFFICIENT2		(0x2a)	*/
+	0x20,	/* AK4671_FIL1_COEFFICIENT3		(0x2b)	*/
+	0x00,	/* AK4671_FIL2_COEFFICIENT0		(0x2c)	*/
+	0x00,	/* AK4671_FIL2_COEFFICIENT1		(0x2d)	*/
+	0x00,	/* AK4671_FIL2_COEFFICIENT2		(0x2e)	*/
+	0x00,	/* AK4671_FIL2_COEFFICIENT3		(0x2f)	*/
+	0x00,	/* AK4671_DIGITAL_FILTER_SELECT2	(0x30)	*/
+	0x00,	/* this register not used			*/
+	0x00,	/* AK4671_E1_COEFFICIENT0		(0x32)	*/
+	0x00,	/* AK4671_E1_COEFFICIENT1		(0x33)	*/
+	0x00,	/* AK4671_E1_COEFFICIENT2		(0x34)	*/
+	0x00,	/* AK4671_E1_COEFFICIENT3		(0x35)	*/
+	0x00,	/* AK4671_E1_COEFFICIENT4		(0x36)	*/
+	0x00,	/* AK4671_E1_COEFFICIENT5		(0x37)	*/
+	0x00,	/* AK4671_E2_COEFFICIENT0		(0x38)	*/
+	0x00,	/* AK4671_E2_COEFFICIENT1		(0x39)	*/
+	0x00,	/* AK4671_E2_COEFFICIENT2		(0x3a)	*/
+	0x00,	/* AK4671_E2_COEFFICIENT3		(0x3b)	*/
+	0x00,	/* AK4671_E2_COEFFICIENT4		(0x3c)	*/
+	0x00,	/* AK4671_E2_COEFFICIENT5		(0x3d)	*/
+	0x00,	/* AK4671_E3_COEFFICIENT0		(0x3e)	*/
+	0x00,	/* AK4671_E3_COEFFICIENT1		(0x3f)	*/
+	0x00,	/* AK4671_E3_COEFFICIENT2		(0x40)	*/
+	0x00,	/* AK4671_E3_COEFFICIENT3		(0x41)	*/
+	0x00,	/* AK4671_E3_COEFFICIENT4		(0x42)	*/
+	0x00,	/* AK4671_E3_COEFFICIENT5		(0x43)	*/
+	0x00,	/* AK4671_E4_COEFFICIENT0		(0x44)	*/
+	0x00,	/* AK4671_E4_COEFFICIENT1		(0x45)	*/
+	0x00,	/* AK4671_E4_COEFFICIENT2		(0x46)	*/
+	0x00,	/* AK4671_E4_COEFFICIENT3		(0x47)	*/
+	0x00,	/* AK4671_E4_COEFFICIENT4		(0x48)	*/
+	0x00,	/* AK4671_E4_COEFFICIENT5		(0x49)	*/
+	0x00,	/* AK4671_E5_COEFFICIENT0		(0x4a)	*/
+	0x00,	/* AK4671_E5_COEFFICIENT1		(0x4b)	*/
+	0x00,	/* AK4671_E5_COEFFICIENT2		(0x4c)	*/
+	0x00,	/* AK4671_E5_COEFFICIENT3		(0x4d)	*/
+	0x00,	/* AK4671_E5_COEFFICIENT4		(0x4e)	*/
+	0x00,	/* AK4671_E5_COEFFICIENT5		(0x4f)	*/
+	0x88,	/* AK4671_EQ_CONTROL_250HZ_100HZ	(0x50)	*/
+	0x88,	/* AK4671_EQ_CONTROL_3500HZ_1KHZ	(0x51)	*/
+	0x08,	/* AK4671_EQ_CONTRO_10KHZ		(0x52)	*/
+	0x00,	/* AK4671_PCM_IF_CONTROL0		(0x53)	*/
+	0x00,	/* AK4671_PCM_IF_CONTROL1		(0x54)	*/
+	0x00,	/* AK4671_PCM_IF_CONTROL2		(0x55)	*/
+	0x18,	/* AK4671_DIGITAL_VOLUME_B_CONTROL	(0x56)	*/
+	0x18,	/* AK4671_DIGITAL_VOLUME_C_CONTROL	(0x57)	*/
+	0x00,	/* AK4671_SIDETONE_VOLUME_CONTROL	(0x58)	*/
+	0x00,	/* AK4671_DIGITAL_MIXING_CONTROL2	(0x59)	*/
+	0x00,	/* AK4671_SAR_ADC_CONTROL		(0x5a)	*/
+};
+
+/*
+ * LOUT1/ROUT1 output volume control:
+ * from -24 to 6 dB in 6 dB steps (mute instead of -30 dB)
+ */
+static DECLARE_TLV_DB_SCALE(out1_tlv, -3000, 600, 1);
+
+/*
+ * LOUT2/ROUT2 output volume control:
+ * from -33 to 6 dB in 3 dB steps (mute instead of -33 dB)
+ */
+static DECLARE_TLV_DB_SCALE(out2_tlv, -3300, 300, 1);
+
+/*
+ * LOUT3/ROUT3 output volume control:
+ * from -6 to 3 dB in 3 dB steps
+ */
+static DECLARE_TLV_DB_SCALE(out3_tlv, -600, 300, 0);
+
+/*
+ * Mic amp gain control:
+ * from -15 to 30 dB in 3 dB steps
+ * REVISIT: The actual min value(0x01) is -12 dB and the reg value 0x00 is not
+ * available
+ */
+static DECLARE_TLV_DB_SCALE(mic_amp_tlv, -1500, 300, 0);
+
+static const struct snd_kcontrol_new ak4671_snd_controls[] = {
+	/* Common playback gain controls */
+	SOC_SINGLE_TLV("Line Output1 Playback Volume",
+			AK4671_OUTPUT_VOLUME_CONTROL, 0, 0x6, 0, out1_tlv),
+	SOC_SINGLE_TLV("Headphone Output2 Playback Volume",
+			AK4671_OUTPUT_VOLUME_CONTROL, 4, 0xd, 0, out2_tlv),
+	SOC_SINGLE_TLV("Line Output3 Playback Volume",
+			AK4671_LOUT3_POWER_MANAGERMENT, 6, 0x3, 0, out3_tlv),
+
+	/* Common capture gain controls */
+	SOC_DOUBLE_TLV("Mic Amp Capture Volume",
+			AK4671_MIC_AMP_GAIN, 0, 4, 0xf, 0, mic_amp_tlv),
+};
+
+/* event handlers */
+static int ak4671_out2_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_codec *codec = w->codec;
+	u8 reg;
+
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		reg = snd_soc_read(codec, AK4671_LOUT2_POWER_MANAGERMENT);
+		reg |= AK4671_MUTEN;
+		snd_soc_write(codec, AK4671_LOUT2_POWER_MANAGERMENT, reg);
+		break;
+	case SND_SOC_DAPM_PRE_PMD:
+		reg = snd_soc_read(codec, AK4671_LOUT2_POWER_MANAGERMENT);
+		reg &= ~AK4671_MUTEN;
+		snd_soc_write(codec, AK4671_LOUT2_POWER_MANAGERMENT, reg);
+		break;
+	}
+
+	return 0;
+}
+
+/* Output Mixers */
+static const struct snd_kcontrol_new ak4671_lout1_mixer_controls[] = {
+	SOC_DAPM_SINGLE("DACL", AK4671_LOUT1_SIGNAL_SELECT, 0, 1, 0),
+	SOC_DAPM_SINGLE("LINL1", AK4671_LOUT1_SIGNAL_SELECT, 1, 1, 0),
+	SOC_DAPM_SINGLE("LINL2", AK4671_LOUT1_SIGNAL_SELECT, 2, 1, 0),
+	SOC_DAPM_SINGLE("LINL3", AK4671_LOUT1_SIGNAL_SELECT, 3, 1, 0),
+	SOC_DAPM_SINGLE("LINL4", AK4671_LOUT1_SIGNAL_SELECT, 4, 1, 0),
+	SOC_DAPM_SINGLE("LOOPL", AK4671_LOUT1_SIGNAL_SELECT, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new ak4671_rout1_mixer_controls[] = {
+	SOC_DAPM_SINGLE("DACR", AK4671_ROUT1_SIGNAL_SELECT, 0, 1, 0),
+	SOC_DAPM_SINGLE("RINR1", AK4671_ROUT1_SIGNAL_SELECT, 1, 1, 0),
+	SOC_DAPM_SINGLE("RINR2", AK4671_ROUT1_SIGNAL_SELECT, 2, 1, 0),
+	SOC_DAPM_SINGLE("RINR3", AK4671_ROUT1_SIGNAL_SELECT, 3, 1, 0),
+	SOC_DAPM_SINGLE("RINR4", AK4671_ROUT1_SIGNAL_SELECT, 4, 1, 0),
+	SOC_DAPM_SINGLE("LOOPR", AK4671_ROUT1_SIGNAL_SELECT, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new ak4671_lout2_mixer_controls[] = {
+	SOC_DAPM_SINGLE("DACHL", AK4671_LOUT2_SIGNAL_SELECT, 0, 1, 0),
+	SOC_DAPM_SINGLE("LINH1", AK4671_LOUT2_SIGNAL_SELECT, 1, 1, 0),
+	SOC_DAPM_SINGLE("LINH2", AK4671_LOUT2_SIGNAL_SELECT, 2, 1, 0),
+	SOC_DAPM_SINGLE("LINH3", AK4671_LOUT2_SIGNAL_SELECT, 3, 1, 0),
+	SOC_DAPM_SINGLE("LINH4", AK4671_LOUT2_SIGNAL_SELECT, 4, 1, 0),
+	SOC_DAPM_SINGLE("LOOPHL", AK4671_LOUT2_SIGNAL_SELECT, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new ak4671_rout2_mixer_controls[] = {
+	SOC_DAPM_SINGLE("DACHR", AK4671_ROUT2_SIGNAL_SELECT, 0, 1, 0),
+	SOC_DAPM_SINGLE("RINH1", AK4671_ROUT2_SIGNAL_SELECT, 1, 1, 0),
+	SOC_DAPM_SINGLE("RINH2", AK4671_ROUT2_SIGNAL_SELECT, 2, 1, 0),
+	SOC_DAPM_SINGLE("RINH3", AK4671_ROUT2_SIGNAL_SELECT, 3, 1, 0),
+	SOC_DAPM_SINGLE("RINH4", AK4671_ROUT2_SIGNAL_SELECT, 4, 1, 0),
+	SOC_DAPM_SINGLE("LOOPHR", AK4671_ROUT2_SIGNAL_SELECT, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new ak4671_lout3_mixer_controls[] = {
+	SOC_DAPM_SINGLE("DACSL", AK4671_LOUT3_SIGNAL_SELECT, 0, 1, 0),
+	SOC_DAPM_SINGLE("LINS1", AK4671_LOUT3_SIGNAL_SELECT, 1, 1, 0),
+	SOC_DAPM_SINGLE("LINS2", AK4671_LOUT3_SIGNAL_SELECT, 2, 1, 0),
+	SOC_DAPM_SINGLE("LINS3", AK4671_LOUT3_SIGNAL_SELECT, 3, 1, 0),
+	SOC_DAPM_SINGLE("LINS4", AK4671_LOUT3_SIGNAL_SELECT, 4, 1, 0),
+	SOC_DAPM_SINGLE("LOOPSL", AK4671_LOUT3_SIGNAL_SELECT, 5, 1, 0),
+};
+
+static const struct snd_kcontrol_new ak4671_rout3_mixer_controls[] = {
+	SOC_DAPM_SINGLE("DACSR", AK4671_ROUT3_SIGNAL_SELECT, 0, 1, 0),
+	SOC_DAPM_SINGLE("RINS1", AK4671_ROUT3_SIGNAL_SELECT, 1, 1, 0),
+	SOC_DAPM_SINGLE("RINS2", AK4671_ROUT3_SIGNAL_SELECT, 2, 1, 0),
+	SOC_DAPM_SINGLE("RINS3", AK4671_ROUT3_SIGNAL_SELECT, 3, 1, 0),
+	SOC_DAPM_SINGLE("RINS4", AK4671_ROUT3_SIGNAL_SELECT, 4, 1, 0),
+	SOC_DAPM_SINGLE("LOOPSR", AK4671_ROUT3_SIGNAL_SELECT, 5, 1, 0),
+};
+
+/* Input MUXs */
+static const char *ak4671_lin_mux_texts[] =
+		{"LIN1", "LIN2", "LIN3", "LIN4"};
+static const struct soc_enum ak4671_lin_mux_enum =
+	SOC_ENUM_SINGLE(AK4671_MIC_SIGNAL_SELECT, 0,
+			ARRAY_SIZE(ak4671_lin_mux_texts),
+			ak4671_lin_mux_texts);
+static const struct snd_kcontrol_new ak4671_lin_mux_control =
+	SOC_DAPM_ENUM("Route", ak4671_lin_mux_enum);
+
+static const char *ak4671_rin_mux_texts[] =
+		{"RIN1", "RIN2", "RIN3", "RIN4"};
+static const struct soc_enum ak4671_rin_mux_enum =
+	SOC_ENUM_SINGLE(AK4671_MIC_SIGNAL_SELECT, 2,
+			ARRAY_SIZE(ak4671_rin_mux_texts),
+			ak4671_rin_mux_texts);
+static const struct snd_kcontrol_new ak4671_rin_mux_control =
+	SOC_DAPM_ENUM("Route", ak4671_rin_mux_enum);
+
+static const struct snd_soc_dapm_widget ak4671_dapm_widgets[] = {
+	/* Inputs */
+	SND_SOC_DAPM_INPUT("LIN1"),
+	SND_SOC_DAPM_INPUT("RIN1"),
+	SND_SOC_DAPM_INPUT("LIN2"),
+	SND_SOC_DAPM_INPUT("RIN2"),
+	SND_SOC_DAPM_INPUT("LIN3"),
+	SND_SOC_DAPM_INPUT("RIN3"),
+	SND_SOC_DAPM_INPUT("LIN4"),
+	SND_SOC_DAPM_INPUT("RIN4"),
+
+	/* Outputs */
+	SND_SOC_DAPM_OUTPUT("LOUT1"),
+	SND_SOC_DAPM_OUTPUT("ROUT1"),
+	SND_SOC_DAPM_OUTPUT("LOUT2"),
+	SND_SOC_DAPM_OUTPUT("ROUT2"),
+	SND_SOC_DAPM_OUTPUT("LOUT3"),
+	SND_SOC_DAPM_OUTPUT("ROUT3"),
+
+	/* DAC */
+	SND_SOC_DAPM_DAC("DAC Left", "Left HiFi Playback",
+			AK4671_AD_DA_POWER_MANAGEMENT, 6, 0),
+	SND_SOC_DAPM_DAC("DAC Right", "Right HiFi Playback",
+			AK4671_AD_DA_POWER_MANAGEMENT, 7, 0),
+
+	/* ADC */
+	SND_SOC_DAPM_ADC("ADC Left", "Left HiFi Capture",
+			AK4671_AD_DA_POWER_MANAGEMENT, 4, 0),
+	SND_SOC_DAPM_ADC("ADC Right", "Right HiFi Capture",
+			AK4671_AD_DA_POWER_MANAGEMENT, 5, 0),
+
+	/* PGA */
+	SND_SOC_DAPM_PGA("LOUT2 Mix Amp",
+			AK4671_LOUT2_POWER_MANAGERMENT, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("ROUT2 Mix Amp",
+			AK4671_LOUT2_POWER_MANAGERMENT, 6, 0, NULL, 0),
+
+	SND_SOC_DAPM_PGA("LIN1 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 0, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("RIN1 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 1, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("LIN2 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 2, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("RIN2 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 3, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("LIN3 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("RIN3 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 5, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("LIN4 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 6, 0, NULL, 0),
+	SND_SOC_DAPM_PGA("RIN4 Mixing Circuit",
+			AK4671_MIXING_POWER_MANAGEMENT1, 7, 0, NULL, 0),
+
+	/* Output Mixers */
+	SND_SOC_DAPM_MIXER("LOUT1 Mixer", AK4671_LOUT1_POWER_MANAGERMENT, 0, 0,
+			&ak4671_lout1_mixer_controls[0],
+			ARRAY_SIZE(ak4671_lout1_mixer_controls)),
+	SND_SOC_DAPM_MIXER("ROUT1 Mixer", AK4671_LOUT1_POWER_MANAGERMENT, 1, 0,
+			&ak4671_rout1_mixer_controls[0],
+			ARRAY_SIZE(ak4671_rout1_mixer_controls)),
+	SND_SOC_DAPM_MIXER_E("LOUT2 Mixer", AK4671_LOUT2_POWER_MANAGERMENT,
+			0, 0, &ak4671_lout2_mixer_controls[0],
+			ARRAY_SIZE(ak4671_lout2_mixer_controls),
+			ak4671_out2_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_MIXER_E("ROUT2 Mixer", AK4671_LOUT2_POWER_MANAGERMENT,
+			1, 0, &ak4671_rout2_mixer_controls[0],
+			ARRAY_SIZE(ak4671_rout2_mixer_controls),
+			ak4671_out2_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_MIXER("LOUT3 Mixer", AK4671_LOUT3_POWER_MANAGERMENT, 0, 0,
+			&ak4671_lout3_mixer_controls[0],
+			ARRAY_SIZE(ak4671_lout3_mixer_controls)),
+	SND_SOC_DAPM_MIXER("ROUT3 Mixer", AK4671_LOUT3_POWER_MANAGERMENT, 1, 0,
+			&ak4671_rout3_mixer_controls[0],
+			ARRAY_SIZE(ak4671_rout3_mixer_controls)),
+
+	/* Input MUXs */
+	SND_SOC_DAPM_MUX("LIN MUX", AK4671_AD_DA_POWER_MANAGEMENT, 2, 0,
+			&ak4671_lin_mux_control),
+	SND_SOC_DAPM_MUX("RIN MUX", AK4671_AD_DA_POWER_MANAGEMENT, 3, 0,
+			&ak4671_rin_mux_control),
+
+	/* Mic Power */
+	SND_SOC_DAPM_MICBIAS("Mic Bias", AK4671_AD_DA_POWER_MANAGEMENT, 1, 0),
+
+	/* Supply */
+	SND_SOC_DAPM_SUPPLY("PMPLL", AK4671_PLL_MODE_SELECT1, 0, 0, NULL, 0),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+	{"DAC Left", "NULL", "PMPLL"},
+	{"DAC Right", "NULL", "PMPLL"},
+	{"ADC Left", "NULL", "PMPLL"},
+	{"ADC Right", "NULL", "PMPLL"},
+
+	/* Outputs */
+	{"LOUT1", "NULL", "LOUT1 Mixer"},
+	{"ROUT1", "NULL", "ROUT1 Mixer"},
+	{"LOUT2", "NULL", "LOUT2 Mix Amp"},
+	{"ROUT2", "NULL", "ROUT2 Mix Amp"},
+	{"LOUT3", "NULL", "LOUT3 Mixer"},
+	{"ROUT3", "NULL", "ROUT3 Mixer"},
+
+	{"LOUT1 Mixer", "DACL", "DAC Left"},
+	{"ROUT1 Mixer", "DACR", "DAC Right"},
+	{"LOUT2 Mixer", "DACHL", "DAC Left"},
+	{"ROUT2 Mixer", "DACHR", "DAC Right"},
+	{"LOUT2 Mix Amp", "NULL", "LOUT2 Mixer"},
+	{"ROUT2 Mix Amp", "NULL", "ROUT2 Mixer"},
+	{"LOUT3 Mixer", "DACSL", "DAC Left"},
+	{"ROUT3 Mixer", "DACSR", "DAC Right"},
+
+	/* Inputs */
+	{"LIN MUX", "LIN1", "LIN1"},
+	{"LIN MUX", "LIN2", "LIN2"},
+	{"LIN MUX", "LIN3", "LIN3"},
+	{"LIN MUX", "LIN4", "LIN4"},
+
+	{"RIN MUX", "RIN1", "RIN1"},
+	{"RIN MUX", "RIN2", "RIN2"},
+	{"RIN MUX", "RIN3", "RIN3"},
+	{"RIN MUX", "RIN4", "RIN4"},
+
+	{"LIN1", NULL, "Mic Bias"},
+	{"RIN1", NULL, "Mic Bias"},
+	{"LIN2", NULL, "Mic Bias"},
+	{"RIN2", NULL, "Mic Bias"},
+
+	{"ADC Left", "NULL", "LIN MUX"},
+	{"ADC Right", "NULL", "RIN MUX"},
+
+	/* Analog Loops */
+	{"LIN1 Mixing Circuit", "NULL", "LIN1"},
+	{"RIN1 Mixing Circuit", "NULL", "RIN1"},
+	{"LIN2 Mixing Circuit", "NULL", "LIN2"},
+	{"RIN2 Mixing Circuit", "NULL", "RIN2"},
+	{"LIN3 Mixing Circuit", "NULL", "LIN3"},
+	{"RIN3 Mixing Circuit", "NULL", "RIN3"},
+	{"LIN4 Mixing Circuit", "NULL", "LIN4"},
+	{"RIN4 Mixing Circuit", "NULL", "RIN4"},
+
+	{"LOUT1 Mixer", "LINL1", "LIN1 Mixing Circuit"},
+	{"ROUT1 Mixer", "RINR1", "RIN1 Mixing Circuit"},
+	{"LOUT2 Mixer", "LINH1", "LIN1 Mixing Circuit"},
+	{"ROUT2 Mixer", "RINH1", "RIN1 Mixing Circuit"},
+	{"LOUT3 Mixer", "LINS1", "LIN1 Mixing Circuit"},
+	{"ROUT3 Mixer", "RINS1", "RIN1 Mixing Circuit"},
+
+	{"LOUT1 Mixer", "LINL2", "LIN2 Mixing Circuit"},
+	{"ROUT1 Mixer", "RINR2", "RIN2 Mixing Circuit"},
+	{"LOUT2 Mixer", "LINH2", "LIN2 Mixing Circuit"},
+	{"ROUT2 Mixer", "RINH2", "RIN2 Mixing Circuit"},
+	{"LOUT3 Mixer", "LINS2", "LIN2 Mixing Circuit"},
+	{"ROUT3 Mixer", "RINS2", "RIN2 Mixing Circuit"},
+
+	{"LOUT1 Mixer", "LINL3", "LIN3 Mixing Circuit"},
+	{"ROUT1 Mixer", "RINR3", "RIN3 Mixing Circuit"},
+	{"LOUT2 Mixer", "LINH3", "LIN3 Mixing Circuit"},
+	{"ROUT2 Mixer", "RINH3", "RIN3 Mixing Circuit"},
+	{"LOUT3 Mixer", "LINS3", "LIN3 Mixing Circuit"},
+	{"ROUT3 Mixer", "RINS3", "RIN3 Mixing Circuit"},
+
+	{"LOUT1 Mixer", "LINL4", "LIN4 Mixing Circuit"},
+	{"ROUT1 Mixer", "RINR4", "RIN4 Mixing Circuit"},
+	{"LOUT2 Mixer", "LINH4", "LIN4 Mixing Circuit"},
+	{"ROUT2 Mixer", "RINH4", "RIN4 Mixing Circuit"},
+	{"LOUT3 Mixer", "LINS4", "LIN4 Mixing Circuit"},
+	{"ROUT3 Mixer", "RINS4", "RIN4 Mixing Circuit"},
+};
+
+static int ak4671_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, ak4671_dapm_widgets,
+				  ARRAY_SIZE(ak4671_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+	return 0;
+}
+
+static int ak4671_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *params,
+		struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u8 fs;
+
+	fs = snd_soc_read(codec, AK4671_PLL_MODE_SELECT0);
+	fs &= ~AK4671_FS;
+
+	switch (params_rate(params)) {
+	case 8000:
+		fs |= AK4671_FS_8KHZ;
+		break;
+	case 12000:
+		fs |= AK4671_FS_12KHZ;
+		break;
+	case 16000:
+		fs |= AK4671_FS_16KHZ;
+		break;
+	case 24000:
+		fs |= AK4671_FS_24KHZ;
+		break;
+	case 11025:
+		fs |= AK4671_FS_11_025KHZ;
+		break;
+	case 22050:
+		fs |= AK4671_FS_22_05KHZ;
+		break;
+	case 32000:
+		fs |= AK4671_FS_32KHZ;
+		break;
+	case 44100:
+		fs |= AK4671_FS_44_1KHZ;
+		break;
+	case 48000:
+		fs |= AK4671_FS_48KHZ;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_write(codec, AK4671_PLL_MODE_SELECT0, fs);
+
+	return 0;
+}
+
+static int ak4671_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
+		unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u8 pll;
+
+	pll = snd_soc_read(codec, AK4671_PLL_MODE_SELECT0);
+	pll &= ~AK4671_PLL;
+
+	switch (freq) {
+	case 11289600:
+		pll |= AK4671_PLL_11_2896MHZ;
+		break;
+	case 12000000:
+		pll |= AK4671_PLL_12MHZ;
+		break;
+	case 12288000:
+		pll |= AK4671_PLL_12_288MHZ;
+		break;
+	case 13000000:
+		pll |= AK4671_PLL_13MHZ;
+		break;
+	case 13500000:
+		pll |= AK4671_PLL_13_5MHZ;
+		break;
+	case 19200000:
+		pll |= AK4671_PLL_19_2MHZ;
+		break;
+	case 24000000:
+		pll |= AK4671_PLL_24MHZ;
+		break;
+	case 26000000:
+		pll |= AK4671_PLL_26MHZ;
+		break;
+	case 27000000:
+		pll |= AK4671_PLL_27MHZ;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	snd_soc_write(codec, AK4671_PLL_MODE_SELECT0, pll);
+
+	return 0;
+}
+
+static int ak4671_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u8 mode;
+	u8 format;
+
+	/* set master/slave audio interface */
+	mode = snd_soc_read(codec, AK4671_PLL_MODE_SELECT1);
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		mode |= AK4671_M_S;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		mode &= ~(AK4671_M_S);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	format = snd_soc_read(codec, AK4671_FORMAT_SELECT);
+	format &= ~AK4671_DIF;
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		format |= AK4671_DIF_I2S_MODE;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		format |= AK4671_DIF_MSB_MODE;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		format |= AK4671_DIF_DSP_MODE;
+		format |= AK4671_BCKP;
+		format |= AK4671_MSBS;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set mode and format */
+	snd_soc_write(codec, AK4671_PLL_MODE_SELECT1, mode);
+	snd_soc_write(codec, AK4671_FORMAT_SELECT, format);
+
+	return 0;
+}
+
+static int ak4671_set_bias_level(struct snd_soc_codec *codec,
+		enum snd_soc_bias_level level)
+{
+	u8 reg;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+	case SND_SOC_BIAS_PREPARE:
+	case SND_SOC_BIAS_STANDBY:
+		reg = snd_soc_read(codec, AK4671_AD_DA_POWER_MANAGEMENT);
+		snd_soc_write(codec, AK4671_AD_DA_POWER_MANAGEMENT,
+				reg | AK4671_PMVCM);
+		break;
+	case SND_SOC_BIAS_OFF:
+		snd_soc_write(codec, AK4671_AD_DA_POWER_MANAGEMENT, 0x00);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define AK4671_RATES		(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+				SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
+				SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+				SNDRV_PCM_RATE_48000)
+
+#define AK4671_FORMATS		SNDRV_PCM_FMTBIT_S16_LE
+
+static struct snd_soc_dai_ops ak4671_dai_ops = {
+	.hw_params	= ak4671_hw_params,
+	.set_sysclk	= ak4671_set_dai_sysclk,
+	.set_fmt	= ak4671_set_dai_fmt,
+};
+
+struct snd_soc_dai ak4671_dai = {
+	.name = "AK4671",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = AK4671_RATES,
+		.formats = AK4671_FORMATS,},
+	.capture = {
+		.stream_name = "Capture",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = AK4671_RATES,
+		.formats = AK4671_FORMATS,},
+	.ops = &ak4671_dai_ops,
+};
+EXPORT_SYMBOL_GPL(ak4671_dai);
+
+static int ak4671_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (ak4671_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = ak4671_codec;
+	codec = ak4671_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, ak4671_snd_controls,
+			     ARRAY_SIZE(ak4671_snd_controls));
+	ak4671_add_widgets(codec);
+
+	ak4671_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return ret;
+
+pcm_err:
+	return ret;
+}
+
+static int ak4671_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_ak4671 = {
+	.probe = ak4671_probe,
+	.remove = ak4671_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_ak4671);
+
+static int ak4671_register(struct ak4671_priv *ak4671,
+		enum snd_soc_control_type control)
+{
+	int ret;
+	struct snd_soc_codec *codec = &ak4671->codec;
+
+	if (ak4671_codec) {
+		dev_err(codec->dev, "Another AK4671 is registered\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = ak4671;
+	codec->name = "AK4671";
+	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = ak4671_set_bias_level;
+	codec->dai = &ak4671_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = AK4671_CACHEREGNUM;
+	codec->reg_cache = &ak4671->reg_cache;
+
+	memcpy(codec->reg_cache, ak4671_reg, sizeof(ak4671_reg));
+
+	ret = snd_soc_codec_set_cache_io(codec, 8, 8, control);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		goto err;
+	}
+
+	ak4671_dai.dev = codec->dev;
+	ak4671_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err;
+	}
+
+	ret = snd_soc_register_dai(&ak4671_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		goto err_codec;
+	}
+
+	return 0;
+
+err_codec:
+	snd_soc_unregister_codec(codec);
+err:
+	kfree(ak4671);
+	return ret;
+}
+
+static void ak4671_unregister(struct ak4671_priv *ak4671)
+{
+	ak4671_set_bias_level(&ak4671->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&ak4671_dai);
+	snd_soc_unregister_codec(&ak4671->codec);
+	kfree(ak4671);
+	ak4671_codec = NULL;
+}
+
+static int __devinit ak4671_i2c_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct ak4671_priv *ak4671;
+	struct snd_soc_codec *codec;
+
+	ak4671 = kzalloc(sizeof(struct ak4671_priv), GFP_KERNEL);
+	if (ak4671 == NULL)
+		return -ENOMEM;
+
+	codec = &ak4671->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(client, ak4671);
+	codec->control_data = client;
+
+	codec->dev = &client->dev;
+
+	return ak4671_register(ak4671, SND_SOC_I2C);
+}
+
+static __devexit int ak4671_i2c_remove(struct i2c_client *client)
+{
+	struct ak4671_priv *ak4671 = i2c_get_clientdata(client);
+
+	ak4671_unregister(ak4671);
+
+	return 0;
+}
+
+static const struct i2c_device_id ak4671_i2c_id[] = {
+	{ "ak4671", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ak4671_i2c_id);
+
+static struct i2c_driver ak4671_i2c_driver = {
+	.driver = {
+		.name = "ak4671",
+		.owner = THIS_MODULE,
+	},
+	.probe = ak4671_i2c_probe,
+	.remove = __devexit_p(ak4671_i2c_remove),
+	.id_table = ak4671_i2c_id,
+};
+
+static int __init ak4671_modinit(void)
+{
+	return i2c_add_driver(&ak4671_i2c_driver);
+}
+module_init(ak4671_modinit);
+
+static void __exit ak4671_exit(void)
+{
+	i2c_del_driver(&ak4671_i2c_driver);
+}
+module_exit(ak4671_exit);
+
+MODULE_DESCRIPTION("ASoC AK4671 codec driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ak4671.h b/sound/soc/codecs/ak4671.h
new file mode 100644
index 0000000..e2fad96
--- /dev/null
+++ b/sound/soc/codecs/ak4671.h
@@ -0,0 +1,156 @@
+/*
+ * ak4671.h  --  audio driver for AK4671
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef _AK4671_H
+#define _AK4671_H
+
+#define AK4671_AD_DA_POWER_MANAGEMENT		0x00
+#define AK4671_PLL_MODE_SELECT0			0x01
+#define AK4671_PLL_MODE_SELECT1			0x02
+#define AK4671_FORMAT_SELECT			0x03
+#define AK4671_MIC_SIGNAL_SELECT		0x04
+#define AK4671_MIC_AMP_GAIN			0x05
+#define AK4671_MIXING_POWER_MANAGEMENT0		0x06
+#define AK4671_MIXING_POWER_MANAGEMENT1		0x07
+#define AK4671_OUTPUT_VOLUME_CONTROL		0x08
+#define AK4671_LOUT1_SIGNAL_SELECT		0x09
+#define AK4671_ROUT1_SIGNAL_SELECT		0x0a
+#define AK4671_LOUT2_SIGNAL_SELECT		0x0b
+#define AK4671_ROUT2_SIGNAL_SELECT		0x0c
+#define AK4671_LOUT3_SIGNAL_SELECT		0x0d
+#define AK4671_ROUT3_SIGNAL_SELECT		0x0e
+#define AK4671_LOUT1_POWER_MANAGERMENT		0x0f
+#define AK4671_LOUT2_POWER_MANAGERMENT		0x10
+#define AK4671_LOUT3_POWER_MANAGERMENT		0x11
+#define AK4671_LCH_INPUT_VOLUME_CONTROL		0x12
+#define AK4671_RCH_INPUT_VOLUME_CONTROL		0x13
+#define AK4671_ALC_REFERENCE_SELECT		0x14
+#define AK4671_DIGITAL_MIXING_CONTROL		0x15
+#define AK4671_ALC_TIMER_SELECT			0x16
+#define AK4671_ALC_MODE_CONTROL			0x17
+#define AK4671_MODE_CONTROL1			0x18
+#define AK4671_MODE_CONTROL2			0x19
+#define AK4671_LCH_OUTPUT_VOLUME_CONTROL	0x1a
+#define AK4671_RCH_OUTPUT_VOLUME_CONTROL	0x1b
+#define AK4671_SIDETONE_A_CONTROL		0x1c
+#define AK4671_DIGITAL_FILTER_SELECT		0x1d
+#define AK4671_FIL3_COEFFICIENT0		0x1e
+#define AK4671_FIL3_COEFFICIENT1		0x1f
+#define AK4671_FIL3_COEFFICIENT2		0x20
+#define AK4671_FIL3_COEFFICIENT3		0x21
+#define AK4671_EQ_COEFFICIENT0			0x22
+#define AK4671_EQ_COEFFICIENT1			0x23
+#define AK4671_EQ_COEFFICIENT2			0x24
+#define AK4671_EQ_COEFFICIENT3			0x25
+#define AK4671_EQ_COEFFICIENT4			0x26
+#define AK4671_EQ_COEFFICIENT5			0x27
+#define AK4671_FIL1_COEFFICIENT0		0x28
+#define AK4671_FIL1_COEFFICIENT1		0x29
+#define AK4671_FIL1_COEFFICIENT2		0x2a
+#define AK4671_FIL1_COEFFICIENT3		0x2b
+#define AK4671_FIL2_COEFFICIENT0		0x2c
+#define AK4671_FIL2_COEFFICIENT1		0x2d
+#define AK4671_FIL2_COEFFICIENT2		0x2e
+#define AK4671_FIL2_COEFFICIENT3		0x2f
+#define AK4671_DIGITAL_FILTER_SELECT2		0x30
+#define AK4671_E1_COEFFICIENT0			0x32
+#define AK4671_E1_COEFFICIENT1			0x33
+#define AK4671_E1_COEFFICIENT2			0x34
+#define AK4671_E1_COEFFICIENT3			0x35
+#define AK4671_E1_COEFFICIENT4			0x36
+#define AK4671_E1_COEFFICIENT5			0x37
+#define AK4671_E2_COEFFICIENT0			0x38
+#define AK4671_E2_COEFFICIENT1			0x39
+#define AK4671_E2_COEFFICIENT2			0x3a
+#define AK4671_E2_COEFFICIENT3			0x3b
+#define AK4671_E2_COEFFICIENT4			0x3c
+#define AK4671_E2_COEFFICIENT5			0x3d
+#define AK4671_E3_COEFFICIENT0			0x3e
+#define AK4671_E3_COEFFICIENT1			0x3f
+#define AK4671_E3_COEFFICIENT2			0x40
+#define AK4671_E3_COEFFICIENT3			0x41
+#define AK4671_E3_COEFFICIENT4			0x42
+#define AK4671_E3_COEFFICIENT5			0x43
+#define AK4671_E4_COEFFICIENT0			0x44
+#define AK4671_E4_COEFFICIENT1			0x45
+#define AK4671_E4_COEFFICIENT2			0x46
+#define AK4671_E4_COEFFICIENT3			0x47
+#define AK4671_E4_COEFFICIENT4			0x48
+#define AK4671_E4_COEFFICIENT5			0x49
+#define AK4671_E5_COEFFICIENT0			0x4a
+#define AK4671_E5_COEFFICIENT1			0x4b
+#define AK4671_E5_COEFFICIENT2			0x4c
+#define AK4671_E5_COEFFICIENT3			0x4d
+#define AK4671_E5_COEFFICIENT4			0x4e
+#define AK4671_E5_COEFFICIENT5			0x4f
+#define AK4671_EQ_CONTROL_250HZ_100HZ		0x50
+#define AK4671_EQ_CONTROL_3500HZ_1KHZ		0x51
+#define AK4671_EQ_CONTRO_10KHZ			0x52
+#define AK4671_PCM_IF_CONTROL0			0x53
+#define AK4671_PCM_IF_CONTROL1			0x54
+#define AK4671_PCM_IF_CONTROL2			0x55
+#define AK4671_DIGITAL_VOLUME_B_CONTROL		0x56
+#define AK4671_DIGITAL_VOLUME_C_CONTROL		0x57
+#define AK4671_SIDETONE_VOLUME_CONTROL		0x58
+#define AK4671_DIGITAL_MIXING_CONTROL2		0x59
+#define AK4671_SAR_ADC_CONTROL			0x5a
+
+#define AK4671_CACHEREGNUM			(AK4671_SAR_ADC_CONTROL + 1)
+
+/* Bitfield Definitions */
+
+/* AK4671_AD_DA_POWER_MANAGEMENT (0x00) Fields */
+#define AK4671_PMVCM				0x01
+
+/* AK4671_PLL_MODE_SELECT0 (0x01) Fields */
+#define AK4671_PLL				0x0f
+#define AK4671_PLL_11_2896MHZ			(4 << 0)
+#define AK4671_PLL_12_288MHZ			(5 << 0)
+#define AK4671_PLL_12MHZ			(6 << 0)
+#define AK4671_PLL_24MHZ			(7 << 0)
+#define AK4671_PLL_19_2MHZ			(8 << 0)
+#define AK4671_PLL_13_5MHZ			(12 << 0)
+#define AK4671_PLL_27MHZ			(13 << 0)
+#define AK4671_PLL_13MHZ			(14 << 0)
+#define AK4671_PLL_26MHZ			(15 << 0)
+#define AK4671_FS				0xf0
+#define AK4671_FS_8KHZ				(0 << 4)
+#define AK4671_FS_12KHZ				(1 << 4)
+#define AK4671_FS_16KHZ				(2 << 4)
+#define AK4671_FS_24KHZ				(3 << 4)
+#define AK4671_FS_11_025KHZ			(5 << 4)
+#define AK4671_FS_22_05KHZ			(7 << 4)
+#define AK4671_FS_32KHZ				(10 << 4)
+#define AK4671_FS_48KHZ				(11 << 4)
+#define AK4671_FS_44_1KHZ			(15 << 4)
+
+/* AK4671_PLL_MODE_SELECT1 (0x02) Fields */
+#define AK4671_PMPLL				0x01
+#define AK4671_M_S				0x02
+
+/* AK4671_FORMAT_SELECT (0x03) Fields */
+#define AK4671_DIF				0x03
+#define AK4671_DIF_DSP_MODE			(0 << 0)
+#define AK4671_DIF_MSB_MODE			(2 << 0)
+#define AK4671_DIF_I2S_MODE			(3 << 0)
+#define AK4671_BCKP				0x04
+#define AK4671_MSBS				0x08
+#define AK4671_SDOD				0x10
+
+/* AK4671_LOUT2_POWER_MANAGEMENT (0x10) Fields */
+#define AK4671_MUTEN				0x04
+
+extern struct snd_soc_dai ak4671_dai;
+extern struct snd_soc_codec_device soc_codec_dev_ak4671;
+
+#endif
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index ca1e24a..ffe122d 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -520,6 +520,7 @@
 	SOC_SINGLE("Digital Sidetone Switch", CS4270_FORMAT, 5, 1, 0),
 	SOC_SINGLE("Soft Ramp Switch", CS4270_TRANS, 6, 1, 0),
 	SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0),
+	SOC_SINGLE("De-emphasis filter", CS4270_TRANS, 0, 1, 0),
 	SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1),
 	SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0),
 	SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1),
@@ -598,13 +599,6 @@
 		goto error_free_pcms;
 	}
 
-	/* And finally, register the socdev */
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card\n");
-		goto error_free_pcms;
-	}
-
 	return 0;
 
 error_free_pcms:
@@ -802,22 +796,6 @@
  * and all registers are written back to the hardware when resuming.
  */
 
-static int cs4270_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
-{
-	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
-	struct snd_soc_codec *codec = &cs4270->codec;
-
-	return snd_soc_suspend_device(codec->dev);
-}
-
-static int cs4270_i2c_resume(struct i2c_client *client)
-{
-	struct cs4270_private *cs4270 = i2c_get_clientdata(client);
-	struct snd_soc_codec *codec = &cs4270->codec;
-
-	return snd_soc_resume_device(codec->dev);
-}
-
 static int cs4270_soc_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
 	struct snd_soc_codec *codec = cs4270_codec;
@@ -853,8 +831,6 @@
 	return snd_soc_write(codec, CS4270_PWRCTL, reg);
 }
 #else
-#define cs4270_i2c_suspend	NULL
-#define cs4270_i2c_resume	NULL
 #define cs4270_soc_suspend	NULL
 #define cs4270_soc_resume	NULL
 #endif /* CONFIG_PM */
@@ -873,8 +849,6 @@
 	.id_table = cs4270_id,
 	.probe = cs4270_i2c_probe,
 	.remove = cs4270_i2c_remove,
-	.suspend = cs4270_i2c_suspend,
-	.resume = cs4270_i2c_resume,
 };
 
 /*
diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c
index 38eac9c..e000cdf 100644
--- a/sound/soc/codecs/cx20442.c
+++ b/sound/soc/codecs/cx20442.c
@@ -93,7 +93,6 @@
 	snd_soc_dapm_add_routes(codec, cx20442_audio_map,
 				ARRAY_SIZE(cx20442_audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -355,17 +354,6 @@
 
 	cx20442_add_widgets(codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to register card\n");
-		goto card_err;
-	}
-
-	return ret;
-
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
diff --git a/sound/soc/codecs/pcm3008.c b/sound/soc/codecs/pcm3008.c
index 5cda9e6..2afcd0a 100644
--- a/sound/soc/codecs/pcm3008.c
+++ b/sound/soc/codecs/pcm3008.c
@@ -90,13 +90,6 @@
 		goto pcm_err;
 	}
 
-	/* Register Card. */
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "pcm3008: failed to register card\n");
-		goto card_err;
-	}
-
 	/* DEM1  DEM0  DE-EMPHASIS_MODE
 	 * Low   Low   De-emphasis 44.1 kHz ON
 	 * Low   High  De-emphasis OFF
@@ -136,8 +129,6 @@
 
 gpio_err:
 	pcm3008_gpio_free(setup);
-card_err:
-	snd_soc_free_pcms(socdev);
 pcm_err:
 	kfree(socdev->card->codec);
 
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index c550750..d2ff1cd 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -210,7 +210,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_conn, ARRAY_SIZE(audio_conn));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -613,17 +612,9 @@
 	snd_soc_add_controls(codec, ssm2602_snd_controls,
 				ARRAY_SIZE(ssm2602_snd_controls));
 	ssm2602_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		pr_err("ssm2602: failed to register card\n");
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
index befc648..bbc72c2 100644
--- a/sound/soc/codecs/stac9766.c
+++ b/sound/soc/codecs/stac9766.c
@@ -418,9 +418,6 @@
 	snd_soc_add_controls(codec, stac9766_snd_ac97_controls,
 			     ARRAY_SIZE(stac9766_snd_ac97_controls));
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0)
-		goto reset_err;
 	return 0;
 
 reset_err:
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index 6b24d8b..a9dc5fb 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -85,7 +85,7 @@
 	 * of data into val
 	 */
 
-	if ((reg < 0 || reg > 9) && (reg != 15)) {
+	if (reg > 9 && reg != 15) {
 		printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
 		return -1;
 	}
@@ -395,7 +395,6 @@
 	/* set up audio path interconnects */
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -625,11 +624,10 @@
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
-	int i;
 	u16 reg;
 
 	/* Sync reg_cache with the hardware */
-	for (reg = 0; reg < ARRAY_SIZE(tlv320aic23_reg); i++) {
+	for (reg = 0; reg < TLV320AIC23_RESET; reg++) {
 		u16 val = tlv320aic23_read_reg_cache(codec, reg);
 		tlv320aic23_write(codec, reg, val);
 	}
@@ -707,17 +705,9 @@
 	snd_soc_add_controls(codec, tlv320aic23_snd_controls,
 				ARRAY_SIZE(tlv320aic23_snd_controls));
 	tlv320aic23_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "tlv320aic23: failed to register card\n");
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
index 3387d9e..357b609 100644
--- a/sound/soc/codecs/tlv320aic26.c
+++ b/sound/soc/codecs/tlv320aic26.c
@@ -356,18 +356,7 @@
 			ARRAY_SIZE(aic26_snd_controls));
 	WARN_ON(err < 0);
 
-	/* CODEC is setup, we can register the card now */
-	dev_dbg(&pdev->dev, "Registering card\n");
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "aic26: failed to register card\n");
-		goto card_err;
-	}
 	return 0;
-
- card_err:
-	snd_soc_free_pcms(socdev);
-	return ret;
 }
 
 static int aic26_remove(struct platform_device *pdev)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 3395cf9..2b4dc2b 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -753,7 +753,6 @@
 	/* set up audio path interconnects */
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -1405,18 +1404,8 @@
 
 	aic3x_add_widgets(codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "aic3x: failed to register card\n");
-		goto card_err;
-	}
-
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-
 pcm_err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c
new file mode 100644
index 0000000..9c8903d
--- /dev/null
+++ b/sound/soc/codecs/tlv320dac33.c
@@ -0,0 +1,1229 @@
+/*
+ * ALSA SoC Texas Instruments TLV320DAC33 codec driver
+ *
+ * Author:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include <sound/tlv320dac33-plat.h>
+#include "tlv320dac33.h"
+
+#define DAC33_BUFFER_SIZE_BYTES		24576	/* bytes, 12288 16 bit words,
+						 * 6144 stereo */
+#define DAC33_BUFFER_SIZE_SAMPLES	6144
+
+#define NSAMPLE_MAX		5700
+
+#define LATENCY_TIME_MS		20
+
+static struct snd_soc_codec *tlv320dac33_codec;
+
+enum dac33_state {
+	DAC33_IDLE = 0,
+	DAC33_PREFILL,
+	DAC33_PLAYBACK,
+	DAC33_FLUSH,
+};
+
+struct tlv320dac33_priv {
+	struct mutex mutex;
+	struct workqueue_struct *dac33_wq;
+	struct work_struct work;
+	struct snd_soc_codec codec;
+	int power_gpio;
+	int chip_power;
+	int irq;
+	unsigned int refclk;
+
+	unsigned int alarm_threshold;	/* set to be half of LATENCY_TIME_MS */
+	unsigned int nsample_min;	/* nsample should not be lower than
+					 * this */
+	unsigned int nsample_max;	/* nsample should not be higher than
+					 * this */
+	unsigned int nsample_switch;	/* Use FIFO or bypass FIFO switch */
+	unsigned int nsample;		/* burst read amount from host */
+
+	enum dac33_state state;
+};
+
+static const u8 dac33_reg[DAC33_CACHEREGNUM] = {
+0x00, 0x00, 0x00, 0x00, /* 0x00 - 0x03 */
+0x00, 0x00, 0x00, 0x00, /* 0x04 - 0x07 */
+0x00, 0x00, 0x00, 0x00, /* 0x08 - 0x0b */
+0x00, 0x00, 0x00, 0x00, /* 0x0c - 0x0f */
+0x00, 0x00, 0x00, 0x00, /* 0x10 - 0x13 */
+0x00, 0x00, 0x00, 0x00, /* 0x14 - 0x17 */
+0x00, 0x00, 0x00, 0x00, /* 0x18 - 0x1b */
+0x00, 0x00, 0x00, 0x00, /* 0x1c - 0x1f */
+0x00, 0x00, 0x00, 0x00, /* 0x20 - 0x23 */
+0x00, 0x00, 0x00, 0x00, /* 0x24 - 0x27 */
+0x00, 0x00, 0x00, 0x00, /* 0x28 - 0x2b */
+0x00, 0x00, 0x00, 0x80, /* 0x2c - 0x2f */
+0x80, 0x00, 0x00, 0x00, /* 0x30 - 0x33 */
+0x00, 0x00, 0x00, 0x00, /* 0x34 - 0x37 */
+0x00, 0x00,             /* 0x38 - 0x39 */
+/* Registers 0x3a - 0x3f are reserved  */
+            0x00, 0x00, /* 0x3a - 0x3b */
+0x00, 0x00, 0x00, 0x00, /* 0x3c - 0x3f */
+
+0x00, 0x00, 0x00, 0x00, /* 0x40 - 0x43 */
+0x00, 0x80,             /* 0x44 - 0x45 */
+/* Registers 0x46 - 0x47 are reserved  */
+            0x80, 0x80, /* 0x46 - 0x47 */
+
+0x80, 0x00, 0x00,       /* 0x48 - 0x4a */
+/* Registers 0x4b - 0x7c are reserved  */
+                  0x00, /* 0x4b        */
+0x00, 0x00, 0x00, 0x00, /* 0x4c - 0x4f */
+0x00, 0x00, 0x00, 0x00, /* 0x50 - 0x53 */
+0x00, 0x00, 0x00, 0x00, /* 0x54 - 0x57 */
+0x00, 0x00, 0x00, 0x00, /* 0x58 - 0x5b */
+0x00, 0x00, 0x00, 0x00, /* 0x5c - 0x5f */
+0x00, 0x00, 0x00, 0x00, /* 0x60 - 0x63 */
+0x00, 0x00, 0x00, 0x00, /* 0x64 - 0x67 */
+0x00, 0x00, 0x00, 0x00, /* 0x68 - 0x6b */
+0x00, 0x00, 0x00, 0x00, /* 0x6c - 0x6f */
+0x00, 0x00, 0x00, 0x00, /* 0x70 - 0x73 */
+0x00, 0x00, 0x00, 0x00, /* 0x74 - 0x77 */
+0x00, 0x00, 0x00, 0x00, /* 0x78 - 0x7b */
+0x00,                   /* 0x7c        */
+
+      0xda, 0x33, 0x03, /* 0x7d - 0x7f */
+};
+
+/* Register read and write */
+static inline unsigned int dac33_read_reg_cache(struct snd_soc_codec *codec,
+						unsigned reg)
+{
+	u8 *cache = codec->reg_cache;
+	if (reg >= DAC33_CACHEREGNUM)
+		return 0;
+
+	return cache[reg];
+}
+
+static inline void dac33_write_reg_cache(struct snd_soc_codec *codec,
+					 u8 reg, u8 value)
+{
+	u8 *cache = codec->reg_cache;
+	if (reg >= DAC33_CACHEREGNUM)
+		return;
+
+	cache[reg] = value;
+}
+
+static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
+		      u8 *value)
+{
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	int val;
+
+	*value = reg & 0xff;
+
+	/* If powered off, return the cached value */
+	if (dac33->chip_power) {
+		val = i2c_smbus_read_byte_data(codec->control_data, value[0]);
+		if (val < 0) {
+			dev_err(codec->dev, "Read failed (%d)\n", val);
+			value[0] = dac33_read_reg_cache(codec, reg);
+		} else {
+			value[0] = val;
+			dac33_write_reg_cache(codec, reg, val);
+		}
+	} else {
+		value[0] = dac33_read_reg_cache(codec, reg);
+	}
+
+	return 0;
+}
+
+static int dac33_write(struct snd_soc_codec *codec, unsigned int reg,
+		       unsigned int value)
+{
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	u8 data[2];
+	int ret = 0;
+
+	/*
+	 * data is
+	 *   D15..D8 dac33 register offset
+	 *   D7...D0 register data
+	 */
+	data[0] = reg & 0xff;
+	data[1] = value & 0xff;
+
+	dac33_write_reg_cache(codec, data[0], data[1]);
+	if (dac33->chip_power) {
+		ret = codec->hw_write(codec->control_data, data, 2);
+		if (ret != 2)
+			dev_err(codec->dev, "Write failed (%d)\n", ret);
+		else
+			ret = 0;
+	}
+
+	return ret;
+}
+
+static int dac33_write_locked(struct snd_soc_codec *codec, unsigned int reg,
+		       unsigned int value)
+{
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	int ret;
+
+	mutex_lock(&dac33->mutex);
+	ret = dac33_write(codec, reg, value);
+	mutex_unlock(&dac33->mutex);
+
+	return ret;
+}
+
+#define DAC33_I2C_ADDR_AUTOINC	0x80
+static int dac33_write16(struct snd_soc_codec *codec, unsigned int reg,
+		       unsigned int value)
+{
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	u8 data[3];
+	int ret = 0;
+
+	/*
+	 * data is
+	 *   D23..D16 dac33 register offset
+	 *   D15..D8  register data MSB
+	 *   D7...D0  register data LSB
+	 */
+	data[0] = reg & 0xff;
+	data[1] = (value >> 8) & 0xff;
+	data[2] = value & 0xff;
+
+	dac33_write_reg_cache(codec, data[0], data[1]);
+	dac33_write_reg_cache(codec, data[0] + 1, data[2]);
+
+	if (dac33->chip_power) {
+		/* We need to set autoincrement mode for 16 bit writes */
+		data[0] |= DAC33_I2C_ADDR_AUTOINC;
+		ret = codec->hw_write(codec->control_data, data, 3);
+		if (ret != 3)
+			dev_err(codec->dev, "Write failed (%d)\n", ret);
+		else
+			ret = 0;
+	}
+
+	return ret;
+}
+
+static void dac33_restore_regs(struct snd_soc_codec *codec)
+{
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	u8 *cache = codec->reg_cache;
+	u8 data[2];
+	int i, ret;
+
+	if (!dac33->chip_power)
+		return;
+
+	for (i = DAC33_PWR_CTRL; i <= DAC33_INTP_CTRL_B; i++) {
+		data[0] = i;
+		data[1] = cache[i];
+		/* Skip the read only registers */
+		if ((i >= DAC33_INT_OSC_STATUS &&
+				i <= DAC33_INT_OSC_FREQ_RAT_READ_B) ||
+		    (i >= DAC33_FIFO_WPTR_MSB && i <= DAC33_FIFO_IRQ_FLAG) ||
+		    i == DAC33_DAC_STATUS_FLAGS ||
+		    i == DAC33_SRC_EST_REF_CLK_RATIO_A ||
+		    i == DAC33_SRC_EST_REF_CLK_RATIO_B)
+			continue;
+		ret = codec->hw_write(codec->control_data, data, 2);
+		if (ret != 2)
+			dev_err(codec->dev, "Write failed (%d)\n", ret);
+	}
+	for (i = DAC33_LDAC_PWR_CTRL; i <= DAC33_LINEL_TO_LLO_VOL; i++) {
+		data[0] = i;
+		data[1] = cache[i];
+		ret = codec->hw_write(codec->control_data, data, 2);
+		if (ret != 2)
+			dev_err(codec->dev, "Write failed (%d)\n", ret);
+	}
+	for (i = DAC33_LINER_TO_RLO_VOL; i <= DAC33_OSC_TRIM; i++) {
+		data[0] = i;
+		data[1] = cache[i];
+		ret = codec->hw_write(codec->control_data, data, 2);
+		if (ret != 2)
+			dev_err(codec->dev, "Write failed (%d)\n", ret);
+	}
+}
+
+static inline void dac33_soft_power(struct snd_soc_codec *codec, int power)
+{
+	u8 reg;
+
+	reg = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
+	if (power)
+		reg |= DAC33_PDNALLB;
+	else
+		reg &= ~DAC33_PDNALLB;
+	dac33_write(codec, DAC33_PWR_CTRL, reg);
+}
+
+static void dac33_hard_power(struct snd_soc_codec *codec, int power)
+{
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+
+	mutex_lock(&dac33->mutex);
+	if (power) {
+		if (dac33->power_gpio >= 0) {
+			gpio_set_value(dac33->power_gpio, 1);
+			dac33->chip_power = 1;
+			/* Restore registers */
+			dac33_restore_regs(codec);
+		}
+		dac33_soft_power(codec, 1);
+	} else {
+		dac33_soft_power(codec, 0);
+		if (dac33->power_gpio >= 0) {
+			gpio_set_value(dac33->power_gpio, 0);
+			dac33->chip_power = 0;
+		}
+	}
+	mutex_unlock(&dac33->mutex);
+
+}
+
+static int dac33_get_nsample(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+
+	ucontrol->value.integer.value[0] = dac33->nsample;
+
+	return 0;
+}
+
+static int dac33_set_nsample(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	int ret = 0;
+
+	if (dac33->nsample == ucontrol->value.integer.value[0])
+		return 0;
+
+	if (ucontrol->value.integer.value[0] < dac33->nsample_min ||
+	    ucontrol->value.integer.value[0] > dac33->nsample_max)
+		ret = -EINVAL;
+	else
+		dac33->nsample = ucontrol->value.integer.value[0];
+
+	return ret;
+}
+
+static int dac33_get_nsample_switch(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+
+	ucontrol->value.integer.value[0] = dac33->nsample_switch;
+
+	return 0;
+}
+
+static int dac33_set_nsample_switch(struct snd_kcontrol *kcontrol,
+			 struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	int ret = 0;
+
+	if (dac33->nsample_switch == ucontrol->value.integer.value[0])
+		return 0;
+	/* Do not allow changes while stream is running*/
+	if (codec->active)
+		return -EPERM;
+
+	if (ucontrol->value.integer.value[0] < 0 ||
+	    ucontrol->value.integer.value[0] > 1)
+		ret = -EINVAL;
+	else
+		dac33->nsample_switch = ucontrol->value.integer.value[0];
+
+	return ret;
+}
+
+/*
+ * DACL/R digital volume control:
+ * from 0 dB to -63.5 in 0.5 dB steps
+ * Need to be inverted later on:
+ * 0x00 == 0 dB
+ * 0x7f == -63.5 dB
+ */
+static DECLARE_TLV_DB_SCALE(dac_digivol_tlv, -6350, 50, 0);
+
+static const struct snd_kcontrol_new dac33_snd_controls[] = {
+	SOC_DOUBLE_R_TLV("DAC Digital Playback Volume",
+		DAC33_LDAC_DIG_VOL_CTRL, DAC33_RDAC_DIG_VOL_CTRL,
+		0, 0x7f, 1, dac_digivol_tlv),
+	SOC_DOUBLE_R("DAC Digital Playback Switch",
+		 DAC33_LDAC_DIG_VOL_CTRL, DAC33_RDAC_DIG_VOL_CTRL, 7, 1, 1),
+	SOC_DOUBLE_R("Line to Line Out Volume",
+		 DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1),
+};
+
+static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = {
+	SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0,
+		 dac33_get_nsample, dac33_set_nsample),
+	SOC_SINGLE_EXT("nSample Switch", 0, 0, 1, 0,
+		 dac33_get_nsample_switch, dac33_set_nsample_switch),
+};
+
+/* Analog bypass */
+static const struct snd_kcontrol_new dac33_dapm_abypassl_control =
+	SOC_DAPM_SINGLE("Switch", DAC33_LINEL_TO_LLO_VOL, 7, 1, 1);
+
+static const struct snd_kcontrol_new dac33_dapm_abypassr_control =
+	SOC_DAPM_SINGLE("Switch", DAC33_LINER_TO_RLO_VOL, 7, 1, 1);
+
+static const struct snd_soc_dapm_widget dac33_dapm_widgets[] = {
+	SND_SOC_DAPM_OUTPUT("LEFT_LO"),
+	SND_SOC_DAPM_OUTPUT("RIGHT_LO"),
+
+	SND_SOC_DAPM_INPUT("LINEL"),
+	SND_SOC_DAPM_INPUT("LINER"),
+
+	SND_SOC_DAPM_DAC("DACL", "Left Playback", DAC33_LDAC_PWR_CTRL, 2, 0),
+	SND_SOC_DAPM_DAC("DACR", "Right Playback", DAC33_RDAC_PWR_CTRL, 2, 0),
+
+	/* Analog bypass */
+	SND_SOC_DAPM_SWITCH("Analog Left Bypass", SND_SOC_NOPM, 0, 0,
+				&dac33_dapm_abypassl_control),
+	SND_SOC_DAPM_SWITCH("Analog Right Bypass", SND_SOC_NOPM, 0, 0,
+				&dac33_dapm_abypassr_control),
+
+	SND_SOC_DAPM_REG(snd_soc_dapm_mixer, "Output Left Amp Power",
+			 DAC33_OUT_AMP_PWR_CTRL, 6, 3, 3, 0),
+	SND_SOC_DAPM_REG(snd_soc_dapm_mixer, "Output Right Amp Power",
+			 DAC33_OUT_AMP_PWR_CTRL, 4, 3, 3, 0),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Analog bypass */
+	{"Analog Left Bypass", "Switch", "LINEL"},
+	{"Analog Right Bypass", "Switch", "LINER"},
+
+	{"Output Left Amp Power", NULL, "DACL"},
+	{"Output Right Amp Power", NULL, "DACR"},
+
+	{"Output Left Amp Power", NULL, "Analog Left Bypass"},
+	{"Output Right Amp Power", NULL, "Analog Right Bypass"},
+
+	/* output */
+	{"LEFT_LO", NULL, "Output Left Amp Power"},
+	{"RIGHT_LO", NULL, "Output Right Amp Power"},
+};
+
+static int dac33_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, dac33_dapm_widgets,
+				  ARRAY_SIZE(dac33_dapm_widgets));
+
+	/* set up audio path interconnects */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	return 0;
+}
+
+static int dac33_set_bias_level(struct snd_soc_codec *codec,
+				enum snd_soc_bias_level level)
+{
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		dac33_soft_power(codec, 1);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->bias_level == SND_SOC_BIAS_OFF)
+			dac33_hard_power(codec, 1);
+		dac33_soft_power(codec, 0);
+		break;
+	case SND_SOC_BIAS_OFF:
+		dac33_hard_power(codec, 0);
+		break;
+	}
+	codec->bias_level = level;
+
+	return 0;
+}
+
+static void dac33_work(struct work_struct *work)
+{
+	struct snd_soc_codec *codec;
+	struct tlv320dac33_priv *dac33;
+	u8 reg;
+
+	dac33 = container_of(work, struct tlv320dac33_priv, work);
+	codec = &dac33->codec;
+
+	mutex_lock(&dac33->mutex);
+	switch (dac33->state) {
+	case DAC33_PREFILL:
+		dac33->state = DAC33_PLAYBACK;
+		dac33_write16(codec, DAC33_NSAMPLE_MSB,
+				DAC33_THRREG(dac33->nsample));
+		dac33_write16(codec, DAC33_PREFILL_MSB,
+				DAC33_THRREG(dac33->alarm_threshold));
+		break;
+	case DAC33_PLAYBACK:
+		dac33_write16(codec, DAC33_NSAMPLE_MSB,
+				DAC33_THRREG(dac33->nsample));
+		break;
+	case DAC33_IDLE:
+		break;
+	case DAC33_FLUSH:
+		dac33->state = DAC33_IDLE;
+		/* Mask all interrupts from dac33 */
+		dac33_write(codec, DAC33_FIFO_IRQ_MASK, 0);
+
+		/* flush fifo */
+		reg = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
+		reg |= DAC33_FIFOFLUSH;
+		dac33_write(codec, DAC33_FIFO_CTRL_A, reg);
+		break;
+	}
+	mutex_unlock(&dac33->mutex);
+}
+
+static irqreturn_t dac33_interrupt_handler(int irq, void *dev)
+{
+	struct snd_soc_codec *codec = dev;
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+
+	queue_work(dac33->dac33_wq, &dac33->work);
+
+	return IRQ_HANDLED;
+}
+
+static void dac33_shutdown(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	unsigned int pwr_ctrl;
+
+	/* Stop pending workqueue */
+	if (dac33->nsample_switch)
+		cancel_work_sync(&dac33->work);
+
+	mutex_lock(&dac33->mutex);
+	pwr_ctrl = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
+	pwr_ctrl &= ~(DAC33_OSCPDNB | DAC33_DACRPDNB | DAC33_DACLPDNB);
+	dac33_write(codec, DAC33_PWR_CTRL, pwr_ctrl);
+	mutex_unlock(&dac33->mutex);
+}
+
+static void dac33_oscwait(struct snd_soc_codec *codec)
+{
+	int timeout = 20;
+	u8 reg;
+
+	do {
+		msleep(1);
+		dac33_read(codec, DAC33_INT_OSC_STATUS, &reg);
+	} while (((reg & 0x03) != DAC33_OSCSTATUS_NORMAL) && timeout--);
+	if ((reg & 0x03) != DAC33_OSCSTATUS_NORMAL)
+		dev_err(codec->dev,
+			"internal oscillator calibration failed\n");
+}
+
+static int dac33_hw_params(struct snd_pcm_substream *substream,
+			   struct snd_pcm_hw_params *params,
+			   struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	/* Check parameters for validity */
+	switch (params_rate(params)) {
+	case 44100:
+	case 48000:
+		break;
+	default:
+		dev_err(codec->dev, "unsupported rate %d\n",
+			params_rate(params));
+		return -EINVAL;
+	}
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	default:
+		dev_err(codec->dev, "unsupported format %d\n",
+			params_format(params));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+#define CALC_OSCSET(rate, refclk) ( \
+	((((rate * 10000) / refclk) * 4096) + 5000) / 10000)
+#define CALC_RATIOSET(rate, refclk) ( \
+	((((refclk  * 100000) / rate) * 16384) + 50000) / 100000)
+
+/*
+ * tlv320dac33 is strict on the sequence of the register writes, if the register
+ * writes happens in different order, than dac33 might end up in unknown state.
+ * Use the known, working sequence of register writes to initialize the dac33.
+ */
+static int dac33_prepare_chip(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	unsigned int oscset, ratioset, pwr_ctrl, reg_tmp;
+	u8 aictrl_a, fifoctrl_a;
+
+	switch (substream->runtime->rate) {
+	case 44100:
+	case 48000:
+		oscset = CALC_OSCSET(substream->runtime->rate, dac33->refclk);
+		ratioset = CALC_RATIOSET(substream->runtime->rate,
+					 dac33->refclk);
+		break;
+	default:
+		dev_err(codec->dev, "unsupported rate %d\n",
+			substream->runtime->rate);
+		return -EINVAL;
+	}
+
+
+	aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
+	aictrl_a &= ~(DAC33_NCYCL_MASK | DAC33_WLEN_MASK);
+	fifoctrl_a = dac33_read_reg_cache(codec, DAC33_FIFO_CTRL_A);
+	fifoctrl_a &= ~DAC33_WIDTH;
+	switch (substream->runtime->format) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		aictrl_a |= (DAC33_NCYCL_16 | DAC33_WLEN_16);
+		fifoctrl_a |= DAC33_WIDTH;
+		break;
+	default:
+		dev_err(codec->dev, "unsupported format %d\n",
+			substream->runtime->format);
+		return -EINVAL;
+	}
+
+	mutex_lock(&dac33->mutex);
+	dac33_soft_power(codec, 1);
+
+	reg_tmp = dac33_read_reg_cache(codec, DAC33_INT_OSC_CTRL);
+	dac33_write(codec, DAC33_INT_OSC_CTRL, reg_tmp);
+
+	/* Write registers 0x08 and 0x09 (MSB, LSB) */
+	dac33_write16(codec, DAC33_INT_OSC_FREQ_RAT_A, oscset);
+
+	/* calib time: 128 is a nice number ;) */
+	dac33_write(codec, DAC33_CALIB_TIME, 128);
+
+	/* adjustment treshold & step */
+	dac33_write(codec, DAC33_INT_OSC_CTRL_B, DAC33_ADJTHRSHLD(2) |
+						 DAC33_ADJSTEP(1));
+
+	/* div=4 / gain=1 / div */
+	dac33_write(codec, DAC33_INT_OSC_CTRL_C, DAC33_REFDIV(4));
+
+	pwr_ctrl = dac33_read_reg_cache(codec, DAC33_PWR_CTRL);
+	pwr_ctrl |= DAC33_OSCPDNB | DAC33_DACRPDNB | DAC33_DACLPDNB;
+	dac33_write(codec, DAC33_PWR_CTRL, pwr_ctrl);
+
+	dac33_oscwait(codec);
+
+	if (dac33->nsample_switch) {
+		/* 50-51 : ASRC Control registers */
+		dac33_write(codec, DAC33_ASRC_CTRL_A, (1 << 4)); /* div=2 */
+		dac33_write(codec, DAC33_ASRC_CTRL_B, 1); /* ??? */
+
+		/* Write registers 0x34 and 0x35 (MSB, LSB) */
+		dac33_write16(codec, DAC33_SRC_REF_CLK_RATIO_A, ratioset);
+
+		/* Set interrupts to high active */
+		dac33_write(codec, DAC33_INTP_CTRL_A, DAC33_INTPM_AHIGH);
+
+		dac33_write(codec, DAC33_FIFO_IRQ_MODE_B,
+			    DAC33_ATM(DAC33_FIFO_IRQ_MODE_LEVEL));
+		dac33_write(codec, DAC33_FIFO_IRQ_MASK, DAC33_MAT);
+	} else {
+		/* 50-51 : ASRC Control registers */
+		dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCBYP);
+		dac33_write(codec, DAC33_ASRC_CTRL_B, 0); /* ??? */
+	}
+
+	if (dac33->nsample_switch)
+		fifoctrl_a &= ~DAC33_FBYPAS;
+	else
+		fifoctrl_a |= DAC33_FBYPAS;
+	dac33_write(codec, DAC33_FIFO_CTRL_A, fifoctrl_a);
+
+	dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
+	reg_tmp = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
+	if (dac33->nsample_switch)
+		reg_tmp &= ~DAC33_BCLKON;
+	else
+		reg_tmp |= DAC33_BCLKON;
+	dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_B, reg_tmp);
+
+	if (dac33->nsample_switch) {
+		/* 20: BCLK divide ratio */
+		dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 3);
+
+		dac33_write16(codec, DAC33_ATHR_MSB,
+			      DAC33_THRREG(dac33->alarm_threshold));
+	} else {
+		dac33_write(codec, DAC33_SER_AUDIOIF_CTRL_C, 32);
+	}
+
+	mutex_unlock(&dac33->mutex);
+
+	return 0;
+}
+
+static void dac33_calculate_times(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	unsigned int nsample_limit;
+
+	/* Number of samples (16bit, stereo) in one period */
+	dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4;
+
+	/* Number of samples (16bit, stereo) in ALSA buffer */
+	dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4;
+	/* Subtract one period from the total */
+	dac33->nsample_max -= dac33->nsample_min;
+
+	/* Number of samples for LATENCY_TIME_MS / 2 */
+	dac33->alarm_threshold = substream->runtime->rate /
+				 (1000 / (LATENCY_TIME_MS / 2));
+
+	/* Find and fix up the lowest nsmaple limit */
+	nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS);
+
+	if (dac33->nsample_min < nsample_limit)
+		dac33->nsample_min = nsample_limit;
+
+	if (dac33->nsample < dac33->nsample_min)
+		dac33->nsample = dac33->nsample_min;
+
+	/*
+	 * Find and fix up the highest nsmaple limit
+	 * In order to not overflow the DAC33 buffer substract the
+	 * alarm_threshold value from the size of the DAC33 buffer
+	 */
+	nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold;
+
+	if (dac33->nsample_max > nsample_limit)
+		dac33->nsample_max = nsample_limit;
+
+	if (dac33->nsample > dac33->nsample_max)
+		dac33->nsample = dac33->nsample_max;
+}
+
+static int dac33_pcm_prepare(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	dac33_calculate_times(substream);
+	dac33_prepare_chip(substream);
+
+	return 0;
+}
+
+static int dac33_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
+			     struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_device *socdev = rtd->socdev;
+	struct snd_soc_codec *codec = socdev->card->codec;
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	int ret = 0;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (dac33->nsample_switch) {
+			dac33->state = DAC33_PREFILL;
+			queue_work(dac33->dac33_wq, &dac33->work);
+		}
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (dac33->nsample_switch) {
+			dac33->state = DAC33_FLUSH;
+			queue_work(dac33->dac33_wq, &dac33->work);
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int dac33_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct tlv320dac33_priv *dac33 = codec->private_data;
+	u8 ioc_reg, asrcb_reg;
+
+	ioc_reg = dac33_read_reg_cache(codec, DAC33_INT_OSC_CTRL);
+	asrcb_reg = dac33_read_reg_cache(codec, DAC33_ASRC_CTRL_B);
+	switch (clk_id) {
+	case TLV320DAC33_MCLK:
+		ioc_reg |= DAC33_REFSEL;
+		asrcb_reg |= DAC33_SRCREFSEL;
+		break;
+	case TLV320DAC33_SLEEPCLK:
+		ioc_reg &= ~DAC33_REFSEL;
+		asrcb_reg &= ~DAC33_SRCREFSEL;
+		break;
+	default:
+		dev_err(codec->dev, "Invalid clock ID (%d)\n", clk_id);
+		break;
+	}
+	dac33->refclk = freq;
+
+	dac33_write_reg_cache(codec, DAC33_INT_OSC_CTRL, ioc_reg);
+	dac33_write_reg_cache(codec, DAC33_ASRC_CTRL_B, asrcb_reg);
+
+	return 0;
+}
+
+static int dac33_set_dai_fmt(struct snd_soc_dai *codec_dai,
+			     unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u8 aictrl_a, aictrl_b;
+
+	aictrl_a = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A);
+	aictrl_b = dac33_read_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B);
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Codec Master */
+		aictrl_a |= (DAC33_MSBCLK | DAC33_MSWCLK);
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Codec Slave */
+		aictrl_a &= ~(DAC33_MSBCLK | DAC33_MSWCLK);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	aictrl_a &= ~DAC33_AFMT_MASK;
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		aictrl_a |= DAC33_AFMT_I2S;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		aictrl_a |= DAC33_AFMT_DSP;
+		aictrl_b &= ~DAC33_DATA_DELAY_MASK;
+		aictrl_b |= DAC33_DATA_DELAY(1); /* 1 bit delay */
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		aictrl_a |= DAC33_AFMT_DSP;
+		aictrl_b &= ~DAC33_DATA_DELAY_MASK; /* No delay */
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		aictrl_a |= DAC33_AFMT_RIGHT_J;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aictrl_a |= DAC33_AFMT_LEFT_J;
+		break;
+	default:
+		dev_err(codec->dev, "Unsupported format (%u)\n",
+			fmt & SND_SOC_DAIFMT_FORMAT_MASK);
+		return -EINVAL;
+	}
+
+	dac33_write_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_A, aictrl_a);
+	dac33_write_reg_cache(codec, DAC33_SER_AUDIOIF_CTRL_B, aictrl_b);
+
+	return 0;
+}
+
+static void dac33_init_chip(struct snd_soc_codec *codec)
+{
+	/* 44-46: DAC Control Registers */
+	/* A : DAC sample rate Fsref/1.5 */
+	dac33_write(codec, DAC33_DAC_CTRL_A, DAC33_DACRATE(1));
+	/* B : DAC src=normal, not muted */
+	dac33_write(codec, DAC33_DAC_CTRL_B, DAC33_DACSRCR_RIGHT |
+					     DAC33_DACSRCL_LEFT);
+	/* C : (defaults) */
+	dac33_write(codec, DAC33_DAC_CTRL_C, 0x00);
+
+	/* 64-65 : L&R DAC power control
+	 Line In -> OUT 1V/V Gain, DAC -> OUT 4V/V Gain*/
+	dac33_write(codec, DAC33_LDAC_PWR_CTRL, DAC33_LROUT_GAIN(2));
+	dac33_write(codec, DAC33_RDAC_PWR_CTRL, DAC33_LROUT_GAIN(2));
+
+	/* 73 : volume soft stepping control,
+	 clock source = internal osc (?) */
+	dac33_write(codec, DAC33_ANA_VOL_SOFT_STEP_CTRL, DAC33_VOLCLKEN);
+
+	/* 66 : LOP/LOM Modes */
+	dac33_write(codec, DAC33_OUT_AMP_CM_CTRL, 0xff);
+
+	/* 68 : LOM inverted from LOP */
+	dac33_write(codec, DAC33_OUT_AMP_CTRL, (3<<2));
+
+	dac33_write(codec, DAC33_PWR_CTRL, DAC33_PDNALLB);
+}
+
+static int dac33_soc_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	struct tlv320dac33_priv *dac33;
+	int ret = 0;
+
+	BUG_ON(!tlv320dac33_codec);
+
+	codec = tlv320dac33_codec;
+	socdev->card->codec = codec;
+	dac33 = codec->private_data;
+
+	/* Power up the codec */
+	dac33_hard_power(codec, 1);
+	/* Set default configuration */
+	dac33_init_chip(codec);
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms\n");
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, dac33_snd_controls,
+			     ARRAY_SIZE(dac33_snd_controls));
+	/* Only add the nSample controls, if we have valid IRQ number */
+	if (dac33->irq >= 0)
+		snd_soc_add_controls(codec, dac33_nsample_snd_controls,
+				     ARRAY_SIZE(dac33_nsample_snd_controls));
+
+	dac33_add_widgets(codec);
+
+	/* power on device */
+	dac33_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	return 0;
+
+pcm_err:
+	dac33_hard_power(codec, 0);
+	return ret;
+}
+
+static int dac33_soc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	dac33_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+static int dac33_soc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	dac33_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+	return 0;
+}
+
+static int dac33_soc_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	dac33_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	dac33_set_bias_level(codec, codec->suspend_bias_level);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_tlv320dac33 = {
+	.probe = dac33_soc_probe,
+	.remove = dac33_soc_remove,
+	.suspend = dac33_soc_suspend,
+	.resume = dac33_soc_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_tlv320dac33);
+
+#define DAC33_RATES	(SNDRV_PCM_RATE_44100 | \
+			 SNDRV_PCM_RATE_48000)
+#define DAC33_FORMATS	SNDRV_PCM_FMTBIT_S16_LE
+
+static struct snd_soc_dai_ops dac33_dai_ops = {
+	.shutdown	= dac33_shutdown,
+	.hw_params	= dac33_hw_params,
+	.prepare	= dac33_pcm_prepare,
+	.trigger	= dac33_pcm_trigger,
+	.set_sysclk	= dac33_set_dai_sysclk,
+	.set_fmt	= dac33_set_dai_fmt,
+};
+
+struct snd_soc_dai dac33_dai = {
+	.name = "tlv320dac33",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = DAC33_RATES,
+		.formats = DAC33_FORMATS,},
+	.ops = &dac33_dai_ops,
+};
+EXPORT_SYMBOL_GPL(dac33_dai);
+
+static int dac33_i2c_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct tlv320dac33_platform_data *pdata;
+	struct tlv320dac33_priv *dac33;
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (client->dev.platform_data == NULL) {
+		dev_err(&client->dev, "Platform data not set\n");
+		return -ENODEV;
+	}
+	pdata = client->dev.platform_data;
+
+	dac33 = kzalloc(sizeof(struct tlv320dac33_priv), GFP_KERNEL);
+	if (dac33 == NULL)
+		return -ENOMEM;
+
+	codec = &dac33->codec;
+	codec->private_data = dac33;
+	codec->control_data = client;
+
+	mutex_init(&codec->mutex);
+	mutex_init(&dac33->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->name = "tlv320dac33";
+	codec->owner = THIS_MODULE;
+	codec->read = dac33_read_reg_cache;
+	codec->write = dac33_write_locked;
+	codec->hw_write = (hw_write_t) i2c_master_send;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = dac33_set_bias_level;
+	codec->dai = &dac33_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = ARRAY_SIZE(dac33_reg);
+	codec->reg_cache = kmemdup(dac33_reg, ARRAY_SIZE(dac33_reg),
+				   GFP_KERNEL);
+	if (codec->reg_cache == NULL) {
+		ret = -ENOMEM;
+		goto error_reg;
+	}
+
+	i2c_set_clientdata(client, dac33);
+
+	dac33->power_gpio = pdata->power_gpio;
+	dac33->irq = client->irq;
+	dac33->nsample = NSAMPLE_MAX;
+	/* Disable FIFO use by default */
+	dac33->nsample_switch = 0;
+
+	tlv320dac33_codec = codec;
+
+	codec->dev = &client->dev;
+	dac33_dai.dev = codec->dev;
+
+	/* Check if the reset GPIO number is valid and request it */
+	if (dac33->power_gpio >= 0) {
+		ret = gpio_request(dac33->power_gpio, "tlv320dac33 reset");
+		if (ret < 0) {
+			dev_err(codec->dev,
+				"Failed to request reset GPIO (%d)\n",
+				dac33->power_gpio);
+			snd_soc_unregister_dai(&dac33_dai);
+			snd_soc_unregister_codec(codec);
+			goto error_gpio;
+		}
+		gpio_direction_output(dac33->power_gpio, 0);
+	} else {
+		dac33->chip_power = 1;
+	}
+
+	/* Check if the IRQ number is valid and request it */
+	if (dac33->irq >= 0) {
+		ret = request_irq(dac33->irq, dac33_interrupt_handler,
+				  IRQF_TRIGGER_RISING | IRQF_DISABLED,
+				  codec->name, codec);
+		if (ret < 0) {
+			dev_err(codec->dev, "Could not request IRQ%d (%d)\n",
+						dac33->irq, ret);
+			dac33->irq = -1;
+		}
+		if (dac33->irq != -1) {
+			/* Setup work queue */
+			dac33->dac33_wq =
+				create_singlethread_workqueue("tlv320dac33");
+			if (dac33->dac33_wq == NULL) {
+				free_irq(dac33->irq, &dac33->codec);
+				ret = -ENOMEM;
+				goto error_wq;
+			}
+
+			INIT_WORK(&dac33->work, dac33_work);
+		}
+	}
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto error_codec;
+	}
+
+	ret = snd_soc_register_dai(&dac33_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		goto error_codec;
+	}
+
+	/* Shut down the codec for now */
+	dac33_hard_power(codec, 0);
+
+	return ret;
+
+error_codec:
+	if (dac33->irq >= 0) {
+		free_irq(dac33->irq, &dac33->codec);
+		destroy_workqueue(dac33->dac33_wq);
+	}
+error_wq:
+	if (dac33->power_gpio >= 0)
+		gpio_free(dac33->power_gpio);
+error_gpio:
+	kfree(codec->reg_cache);
+error_reg:
+	tlv320dac33_codec = NULL;
+	kfree(dac33);
+
+	return ret;
+}
+
+static int dac33_i2c_remove(struct i2c_client *client)
+{
+	struct tlv320dac33_priv *dac33;
+
+	dac33 = i2c_get_clientdata(client);
+	dac33_hard_power(&dac33->codec, 0);
+
+	if (dac33->power_gpio >= 0)
+		gpio_free(dac33->power_gpio);
+	if (dac33->irq >= 0)
+		free_irq(dac33->irq, &dac33->codec);
+
+	destroy_workqueue(dac33->dac33_wq);
+	snd_soc_unregister_dai(&dac33_dai);
+	snd_soc_unregister_codec(&dac33->codec);
+	kfree(dac33->codec.reg_cache);
+	kfree(dac33);
+	tlv320dac33_codec = NULL;
+
+	return 0;
+}
+
+static const struct i2c_device_id tlv320dac33_i2c_id[] = {
+	{
+		.name = "tlv320dac33",
+		.driver_data = 0,
+	},
+	{ },
+};
+
+static struct i2c_driver tlv320dac33_i2c_driver = {
+	.driver = {
+		.name = "tlv320dac33",
+		.owner = THIS_MODULE,
+	},
+	.probe		= dac33_i2c_probe,
+	.remove		= __devexit_p(dac33_i2c_remove),
+	.id_table	= tlv320dac33_i2c_id,
+};
+
+static int __init dac33_module_init(void)
+{
+	int r;
+	r = i2c_add_driver(&tlv320dac33_i2c_driver);
+	if (r < 0) {
+		printk(KERN_ERR "DAC33: driver registration failed\n");
+		return r;
+	}
+	return 0;
+}
+module_init(dac33_module_init);
+
+static void __exit dac33_module_exit(void)
+{
+	i2c_del_driver(&tlv320dac33_i2c_driver);
+}
+module_exit(dac33_module_exit);
+
+
+MODULE_DESCRIPTION("ASoC TLV320DAC33 codec driver");
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@nokia.com>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/tlv320dac33.h b/sound/soc/codecs/tlv320dac33.h
new file mode 100644
index 0000000..eb8ae07
--- /dev/null
+++ b/sound/soc/codecs/tlv320dac33.h
@@ -0,0 +1,267 @@
+/*
+ * ALSA SoC Texas Instruments TLV320DAC33 codec driver
+ *
+ * Author:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * Copyright:   (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __TLV320DAC33_H
+#define __TLV320DAC33_H
+
+#define DAC33_PAGE_SELECT		0x00
+#define DAC33_PWR_CTRL			0x01
+#define DAC33_PLL_CTRL_A		0x02
+#define DAC33_PLL_CTRL_B		0x03
+#define DAC33_PLL_CTRL_C		0x04
+#define DAC33_PLL_CTRL_D		0x05
+#define DAC33_PLL_CTRL_E		0x06
+#define DAC33_INT_OSC_CTRL		0x07
+#define DAC33_INT_OSC_FREQ_RAT_A	0x08
+#define DAC33_INT_OSC_FREQ_RAT_B	0x09
+#define DAC33_INT_OSC_DAC_RATIO_SET	0x0A
+#define DAC33_CALIB_TIME		0x0B
+#define DAC33_INT_OSC_CTRL_B		0x0C
+#define DAC33_INT_OSC_CTRL_C		0x0D
+#define DAC33_INT_OSC_STATUS		0x0E
+#define DAC33_INT_OSC_DAC_RATIO_READ	0x0F
+#define DAC33_INT_OSC_FREQ_RAT_READ_A	0x10
+#define DAC33_INT_OSC_FREQ_RAT_READ_B	0x11
+#define DAC33_SER_AUDIOIF_CTRL_A	0x12
+#define DAC33_SER_AUDIOIF_CTRL_B	0x13
+#define DAC33_SER_AUDIOIF_CTRL_C	0x14
+#define DAC33_FIFO_CTRL_A		0x15
+#define DAC33_UTHR_MSB			0x16
+#define DAC33_UTHR_LSB			0x17
+#define DAC33_ATHR_MSB			0x18
+#define DAC33_ATHR_LSB			0x19
+#define DAC33_LTHR_MSB			0x1A
+#define DAC33_LTHR_LSB			0x1B
+#define DAC33_PREFILL_MSB		0x1C
+#define DAC33_PREFILL_LSB		0x1D
+#define DAC33_NSAMPLE_MSB		0x1E
+#define DAC33_NSAMPLE_LSB		0x1F
+#define DAC33_FIFO_WPTR_MSB		0x20
+#define DAC33_FIFO_WPTR_LSB		0x21
+#define DAC33_FIFO_RPTR_MSB		0x22
+#define DAC33_FIFO_RPTR_LSB		0x23
+#define DAC33_FIFO_DEPTH_MSB		0x24
+#define DAC33_FIFO_DEPTH_LSB		0x25
+#define DAC33_SAMPLES_REMAINING_MSB	0x26
+#define DAC33_SAMPLES_REMAINING_LSB	0x27
+#define DAC33_FIFO_IRQ_FLAG		0x28
+#define DAC33_FIFO_IRQ_MASK		0x29
+#define DAC33_FIFO_IRQ_MODE_A		0x2A
+#define DAC33_FIFO_IRQ_MODE_B		0x2B
+#define DAC33_DAC_CTRL_A		0x2C
+#define DAC33_DAC_CTRL_B		0x2D
+#define DAC33_DAC_CTRL_C		0x2E
+#define DAC33_LDAC_DIG_VOL_CTRL		0x2F
+#define DAC33_RDAC_DIG_VOL_CTRL		0x30
+#define DAC33_DAC_STATUS_FLAGS		0x31
+#define DAC33_ASRC_CTRL_A		0x32
+#define DAC33_ASRC_CTRL_B		0x33
+#define DAC33_SRC_REF_CLK_RATIO_A	0x34
+#define DAC33_SRC_REF_CLK_RATIO_B	0x35
+#define DAC33_SRC_EST_REF_CLK_RATIO_A	0x36
+#define DAC33_SRC_EST_REF_CLK_RATIO_B	0x37
+#define DAC33_INTP_CTRL_A		0x38
+#define DAC33_INTP_CTRL_B		0x39
+/* Registers 0x3A - 0x3F Reserved */
+#define DAC33_LDAC_PWR_CTRL		0x40
+#define DAC33_RDAC_PWR_CTRL		0x41
+#define DAC33_OUT_AMP_CM_CTRL		0x42
+#define DAC33_OUT_AMP_PWR_CTRL		0x43
+#define DAC33_OUT_AMP_CTRL		0x44
+#define DAC33_LINEL_TO_LLO_VOL		0x45
+/* Registers 0x45 - 0x47 Reserved */
+#define DAC33_LINER_TO_RLO_VOL		0x48
+#define DAC33_ANA_VOL_SOFT_STEP_CTRL	0x49
+#define DAC33_OSC_TRIM			0x4A
+/* Registers 0x4B - 0x7C Reserved */
+#define DAC33_DEVICE_ID_MSB		0x7D
+#define DAC33_DEVICE_ID_LSB		0x7E
+#define DAC33_DEVICE_REV_ID		0x7F
+
+#define DAC33_CACHEREGNUM               128
+
+/* Bit definitions */
+
+/* DAC33_PWR_CTRL (0x01) */
+#define DAC33_DACRPDNB			(0x01 << 0)
+#define DAC33_DACLPDNB			(0x01 << 1)
+#define DAC33_OSCPDNB			(0x01 << 2)
+#define DAC33_PLLPDNB			(0x01 << 3)
+#define DAC33_PDNALLB			(0x01 << 4)
+#define DAC33_SOFT_RESET		(0x01 << 7)
+
+/* DAC33_INT_OSC_CTRL (0x07) */
+#define DAC33_REFSEL			(0x01 << 1)
+
+/* DAC33_INT_OSC_CTRL_B (0x0C) */
+#define DAC33_ADJSTEP(x)		(x << 0)
+#define DAC33_ADJTHRSHLD(x)		(x << 4)
+
+/* DAC33_INT_OSC_CTRL_C (0x0D) */
+#define DAC33_REFDIV(x)			(x << 4)
+
+/* DAC33_INT_OSC_STATUS (0x0E) */
+#define DAC33_OSCSTATUS_IDLE_CALIB	(0x00)
+#define DAC33_OSCSTATUS_NORMAL		(0x01)
+#define DAC33_OSCSTATUS_ADJUSTMENT	(0x03)
+#define DAC33_OSCSTATUS_NOT_USED	(0x02)
+
+/* DAC33_SER_AUDIOIF_CTRL_A (0x12) */
+#define DAC33_MSWCLK			(0x01 << 0)
+#define DAC33_MSBCLK			(0x01 << 1)
+#define DAC33_AFMT_MASK			(0x03 << 2)
+#define DAC33_AFMT_I2S			(0x00 << 2)
+#define DAC33_AFMT_DSP			(0x01 << 2)
+#define DAC33_AFMT_RIGHT_J		(0x02 << 2)
+#define DAC33_AFMT_LEFT_J		(0x03 << 2)
+#define DAC33_WLEN_MASK			(0x03 << 4)
+#define DAC33_WLEN_16			(0x00 << 4)
+#define DAC33_WLEN_20			(0x01 << 4)
+#define DAC33_WLEN_24			(0x02 << 4)
+#define DAC33_WLEN_32			(0x03 << 4)
+#define DAC33_NCYCL_MASK		(0x03 << 6)
+#define DAC33_NCYCL_16			(0x00 << 6)
+#define DAC33_NCYCL_20			(0x01 << 6)
+#define DAC33_NCYCL_24			(0x02 << 6)
+#define DAC33_NCYCL_32			(0x03 << 6)
+
+/* DAC33_SER_AUDIOIF_CTRL_B (0x13) */
+#define DAC33_DATA_DELAY_MASK		(0x03 << 2)
+#define DAC33_DATA_DELAY(x)		(x << 2)
+#define DAC33_BCLKON			(0x01 << 5)
+
+/* DAC33_FIFO_CTRL_A (0x15) */
+#define DAC33_WIDTH				(0x01 << 0)
+#define DAC33_FBYPAS				(0x01 << 1)
+#define DAC33_FAUTO				(0x01 << 2)
+#define DAC33_FIFOFLUSH			(0x01 << 3)
+
+/*
+ * UTHR, ATHR, LTHR, PREFILL, NSAMPLE (0x16 - 0x1F)
+ * 13-bit values
+*/
+#define DAC33_THRREG(x)			(((x) & 0x1FFF) << 3)
+
+/* DAC33_FIFO_IRQ_MASK (0x29) */
+#define DAC33_MNS			(0x01 << 0)
+#define DAC33_MPS			(0x01 << 1)
+#define DAC33_MAT			(0x01 << 2)
+#define DAC33_MLT			(0x01 << 3)
+#define DAC33_MUT			(0x01 << 4)
+#define DAC33_MUF			(0x01 << 5)
+#define DAC33_MOF			(0x01 << 6)
+
+#define DAC33_FIFO_IRQ_MODE_MASK	(0x03)
+#define DAC33_FIFO_IRQ_MODE_RISING	(0x00)
+#define DAC33_FIFO_IRQ_MODE_FALLING	(0x01)
+#define DAC33_FIFO_IRQ_MODE_LEVEL	(0x02)
+#define DAC33_FIFO_IRQ_MODE_EDGE	(0x03)
+
+/* DAC33_FIFO_IRQ_MODE_A (0x2A) */
+#define DAC33_UTM(x)			(x << 0)
+#define DAC33_UFM(x)			(x << 2)
+#define DAC33_OFM(x)			(x << 4)
+
+/* DAC33_FIFO_IRQ_MODE_B (0x2B) */
+#define DAC33_NSM(x)			(x << 0)
+#define DAC33_PSM(x)			(x << 2)
+#define DAC33_ATM(x)			(x << 4)
+#define DAC33_LTM(x)			(x << 6)
+
+/* DAC33_DAC_CTRL_A (0x2C) */
+#define DAC33_DACRATE(x)		(x << 0)
+#define DAC33_DACDUAL			(0x01 << 4)
+#define DAC33_DACLKSEL_MASK		(0x03 << 5)
+#define DAC33_DACLKSEL_INTSOC		(0x00 << 5)
+#define DAC33_DACLKSEL_PLL		(0x01 << 5)
+#define DAC33_DACLKSEL_MCLK		(0x02 << 5)
+#define DAC33_DACLKSEL_BCLK		(0x03 << 5)
+
+/* DAC33_DAC_CTRL_B (0x2D) */
+#define DAC33_DACSRCR_MASK		(0x03 << 0)
+#define DAC33_DACSRCR_MUTE		(0x00 << 0)
+#define DAC33_DACSRCR_RIGHT		(0x01 << 0)
+#define DAC33_DACSRCR_LEFT		(0x02 << 0)
+#define DAC33_DACSRCR_MONOMIX		(0x03 << 0)
+#define DAC33_DACSRCL_MASK		(0x03 << 2)
+#define DAC33_DACSRCL_MUTE		(0x00 << 2)
+#define DAC33_DACSRCL_LEFT		(0x01 << 2)
+#define DAC33_DACSRCL_RIGHT		(0x02 << 2)
+#define DAC33_DACSRCL_MONOMIX		(0x03 << 2)
+#define DAC33_DVOLSTEP_MASK		(0x03 << 4)
+#define DAC33_DVOLSTEP_SS_PERFS		(0x00 << 4)
+#define DAC33_DVOLSTEP_SS_PER2FS	(0x01 << 4)
+#define DAC33_DVOLSTEP_SS_DISABLED	(0x02 << 4)
+#define DAC33_DVOLCTRL_MASK		(0x03 << 6)
+#define DAC33_DVOLCTRL_LR_INDEPENDENT1	(0x00 << 6)
+#define DAC33_DVOLCTRL_LR_RIGHT_CONTROL	(0x01 << 6)
+#define DAC33_DVOLCTRL_LR_LEFT_CONTROL	(0x02 << 6)
+#define DAC33_DVOLCTRL_LR_INDEPENDENT2	(0x03 << 6)
+
+/* DAC33_DAC_CTRL_C (0x2E) */
+#define DAC33_DEEMENR			(0x01 << 0)
+#define DAC33_EFFENR			(0x01 << 1)
+#define DAC33_DEEMENL			(0x01 << 2)
+#define DAC33_EFFENL			(0x01 << 3)
+#define DAC33_EN3D			(0x01 << 4)
+#define DAC33_RESYNMUTE			(0x01 << 5)
+#define DAC33_RESYNEN			(0x01 << 6)
+
+/* DAC33_ASRC_CTRL_A (0x32) */
+#define DAC33_SRCBYP			(0x01 << 0)
+#define DAC33_SRCLKSEL_MASK		(0x03 << 1)
+#define DAC33_SRCLKSEL_INTSOC		(0x00 << 1)
+#define DAC33_SRCLKSEL_PLL		(0x01 << 1)
+#define DAC33_SRCLKSEL_MCLK		(0x02 << 1)
+#define DAC33_SRCLKSEL_BCLK		(0x03 << 1)
+#define DAC33_SRCLKDIV(x)		(x << 3)
+
+/* DAC33_ASRC_CTRL_B (0x33) */
+#define DAC33_SRCSETUP(x)		(x << 0)
+#define DAC33_SRCREFSEL			(0x01 << 4)
+#define DAC33_SRCREFDIV(x)		(x << 5)
+
+/* DAC33_INTP_CTRL_A (0x38) */
+#define DAC33_INTPSEL			(0x01 << 0)
+#define DAC33_INTPM_MASK		(0x03 << 1)
+#define DAC33_INTPM_ALOW_OPENDRAIN	(0x00 << 1)
+#define DAC33_INTPM_ALOW		(0x01 << 1)
+#define DAC33_INTPM_AHIGH		(0x02 << 1)
+
+/* DAC33_LDAC_PWR_CTRL (0x40) */
+/* DAC33_RDAC_PWR_CTRL (0x41) */
+#define DAC33_DACLRNUM			(0x01 << 2)
+#define DAC33_LROUT_GAIN(x)		(x << 0)
+
+/* DAC33_ANA_VOL_SOFT_STEP_CTRL (0x49) */
+#define DAC33_VOLCLKSEL			(0x01 << 0)
+#define DAC33_VOLCLKEN			(0x01 << 1)
+#define DAC33_VOLBYPASS			(0x01 << 2)
+
+#define TLV320DAC33_MCLK		0
+#define TLV320DAC33_SLEEPCLK		1
+
+extern struct snd_soc_dai dac33_dai;
+extern struct snd_soc_codec_device soc_codec_dev_tlv320dac33;
+
+#endif /* __TLV320DAC33_H */
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
new file mode 100644
index 0000000..6b650c1
--- /dev/null
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -0,0 +1,463 @@
+/*
+ * ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * Author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <sound/tpa6130a2-plat.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+
+#include "tpa6130a2.h"
+
+static struct i2c_client *tpa6130a2_client;
+
+/* This struct is used to save the context */
+struct tpa6130a2_data {
+	struct mutex mutex;
+	unsigned char regs[TPA6130A2_CACHEREGNUM];
+	int power_gpio;
+	unsigned char power_state;
+};
+
+static int tpa6130a2_i2c_read(int reg)
+{
+	struct tpa6130a2_data *data;
+	int val;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	/* If powered off, return the cached value */
+	if (data->power_state) {
+		val = i2c_smbus_read_byte_data(tpa6130a2_client, reg);
+		if (val < 0)
+			dev_err(&tpa6130a2_client->dev, "Read failed\n");
+		else
+			data->regs[reg] = val;
+	} else {
+		val = data->regs[reg];
+	}
+
+	return val;
+}
+
+static int tpa6130a2_i2c_write(int reg, u8 value)
+{
+	struct tpa6130a2_data *data;
+	int val = 0;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	if (data->power_state) {
+		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
+		if (val < 0)
+			dev_err(&tpa6130a2_client->dev, "Write failed\n");
+	}
+
+	/* Either powered on or off, we save the context */
+	data->regs[reg] = value;
+
+	return val;
+}
+
+static u8 tpa6130a2_read(int reg)
+{
+	struct tpa6130a2_data *data;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	return data->regs[reg];
+}
+
+static void tpa6130a2_initialize(void)
+{
+	struct tpa6130a2_data *data;
+	int i;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	for (i = 1; i < TPA6130A2_REG_VERSION; i++)
+		tpa6130a2_i2c_write(i, data->regs[i]);
+}
+
+static void tpa6130a2_power(int power)
+{
+	struct	tpa6130a2_data *data;
+	u8	val;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	mutex_lock(&data->mutex);
+	if (power) {
+		/* Power on */
+		if (data->power_gpio >= 0) {
+			gpio_set_value(data->power_gpio, 1);
+			data->power_state = 1;
+			tpa6130a2_initialize();
+		}
+		/* Clear SWS */
+		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
+		val &= ~TPA6130A2_SWS;
+		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
+	} else {
+		/* set SWS */
+		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
+		val |= TPA6130A2_SWS;
+		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
+		/* Power off */
+		if (data->power_gpio >= 0) {
+			gpio_set_value(data->power_gpio, 0);
+			data->power_state = 0;
+		}
+	}
+	mutex_unlock(&data->mutex);
+}
+
+static int tpa6130a2_get_reg(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	struct tpa6130a2_data *data;
+	unsigned int reg = mc->reg;
+	unsigned int shift = mc->shift;
+	unsigned int mask = mc->max;
+	unsigned int invert = mc->invert;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	mutex_lock(&data->mutex);
+
+	ucontrol->value.integer.value[0] =
+		(tpa6130a2_read(reg) >> shift) & mask;
+
+	if (invert)
+		ucontrol->value.integer.value[0] =
+			mask - ucontrol->value.integer.value[0];
+
+	mutex_unlock(&data->mutex);
+	return 0;
+}
+
+static int tpa6130a2_set_reg(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct soc_mixer_control *mc =
+		(struct soc_mixer_control *)kcontrol->private_value;
+	struct tpa6130a2_data *data;
+	unsigned int reg = mc->reg;
+	unsigned int shift = mc->shift;
+	unsigned int mask = mc->max;
+	unsigned int invert = mc->invert;
+	unsigned int val = (ucontrol->value.integer.value[0] & mask);
+	unsigned int val_reg;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	if (invert)
+		val = mask - val;
+
+	mutex_lock(&data->mutex);
+
+	val_reg = tpa6130a2_read(reg);
+	if (((val_reg >> shift) & mask) == val) {
+		mutex_unlock(&data->mutex);
+		return 0;
+	}
+
+	val_reg &= ~(mask << shift);
+	val_reg |= val << shift;
+	tpa6130a2_i2c_write(reg, val_reg);
+
+	mutex_unlock(&data->mutex);
+
+	return 1;
+}
+
+/*
+ * TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
+ * down in gain.
+ */
+static const unsigned int tpa6130_tlv[] = {
+	TLV_DB_RANGE_HEAD(10),
+	0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
+	2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
+	4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
+	6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
+	8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
+	10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
+	12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
+	14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
+	21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
+	38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0),
+};
+
+static const struct snd_kcontrol_new tpa6130a2_controls[] = {
+	SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume",
+		       TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
+		       tpa6130a2_get_reg, tpa6130a2_set_reg,
+		       tpa6130_tlv),
+};
+
+/*
+ * Enable or disable channel (left or right)
+ * The bit number for mute and amplifier are the same per channel:
+ * bit 6: Right channel
+ * bit 7: Left channel
+ * in both registers.
+ */
+static void tpa6130a2_channel_enable(u8 channel, int enable)
+{
+	struct	tpa6130a2_data *data;
+	u8	val;
+
+	BUG_ON(tpa6130a2_client == NULL);
+	data = i2c_get_clientdata(tpa6130a2_client);
+
+	if (enable) {
+		/* Enable channel */
+		/* Enable amplifier */
+		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
+		val |= channel;
+		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
+
+		/* Unmute channel */
+		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
+		val &= ~channel;
+		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
+	} else {
+		/* Disable channel */
+		/* Mute channel */
+		val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
+		val |= channel;
+		tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
+
+		/* Disable amplifier */
+		val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
+		val &= ~channel;
+		tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
+	}
+}
+
+static int tpa6130a2_left_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		tpa6130a2_channel_enable(TPA6130A2_HP_EN_L, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		tpa6130a2_channel_enable(TPA6130A2_HP_EN_L, 0);
+		break;
+	}
+	return 0;
+}
+
+static int tpa6130a2_right_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		tpa6130a2_channel_enable(TPA6130A2_HP_EN_R, 0);
+		break;
+	}
+	return 0;
+}
+
+static int tpa6130a2_supply_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMU:
+		tpa6130a2_power(1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		tpa6130a2_power(0);
+		break;
+	}
+	return 0;
+}
+
+static const struct snd_soc_dapm_widget tpa6130a2_dapm_widgets[] = {
+	SND_SOC_DAPM_PGA_E("TPA6130A2 Left", SND_SOC_NOPM,
+			0, 0, NULL, 0, tpa6130a2_left_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_PGA_E("TPA6130A2 Right", SND_SOC_NOPM,
+			0, 0, NULL, 0, tpa6130a2_right_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_SUPPLY("TPA6130A2 Enable", SND_SOC_NOPM,
+			0, 0, tpa6130a2_supply_event,
+			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+	/* Outputs */
+	SND_SOC_DAPM_HP("TPA6130A2 Headphone Left", NULL),
+	SND_SOC_DAPM_HP("TPA6130A2 Headphone Right", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	{"TPA6130A2 Headphone Left", NULL, "TPA6130A2 Left"},
+	{"TPA6130A2 Headphone Right", NULL, "TPA6130A2 Right"},
+
+	{"TPA6130A2 Headphone Left", NULL, "TPA6130A2 Enable"},
+	{"TPA6130A2 Headphone Right", NULL, "TPA6130A2 Enable"},
+};
+
+int tpa6130a2_add_controls(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, tpa6130a2_dapm_widgets,
+				ARRAY_SIZE(tpa6130a2_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	return snd_soc_add_controls(codec, tpa6130a2_controls,
+				ARRAY_SIZE(tpa6130a2_controls));
+
+}
+EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);
+
+static int tpa6130a2_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct device *dev;
+	struct tpa6130a2_data *data;
+	struct tpa6130a2_platform_data *pdata;
+	int ret;
+
+	dev = &client->dev;
+
+	if (client->dev.platform_data == NULL) {
+		dev_err(dev, "Platform data not set\n");
+		dump_stack();
+		return -ENODEV;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL) {
+		dev_err(dev, "Can not allocate memory\n");
+		return -ENOMEM;
+	}
+
+	tpa6130a2_client = client;
+
+	i2c_set_clientdata(tpa6130a2_client, data);
+
+	pdata = client->dev.platform_data;
+	data->power_gpio = pdata->power_gpio;
+
+	mutex_init(&data->mutex);
+
+	/* Set default register values */
+	data->regs[TPA6130A2_REG_CONTROL] =	TPA6130A2_SWS;
+	data->regs[TPA6130A2_REG_VOL_MUTE] =	TPA6130A2_MUTE_R |
+						TPA6130A2_MUTE_L;
+
+	if (data->power_gpio >= 0) {
+		ret = gpio_request(data->power_gpio, "tpa6130a2 enable");
+		if (ret < 0) {
+			dev_err(dev, "Failed to request power GPIO (%d)\n",
+				data->power_gpio);
+			goto fail;
+		}
+		gpio_direction_output(data->power_gpio, 0);
+	} else {
+		data->power_state = 1;
+		tpa6130a2_initialize();
+	}
+
+	tpa6130a2_power(1);
+
+	/* Read version */
+	ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
+				 TPA6130A2_VERSION_MASK;
+	if ((ret != 1) && (ret != 2))
+		dev_warn(dev, "UNTESTED version detected (%d)\n", ret);
+
+	/* Disable the chip */
+	tpa6130a2_power(0);
+
+	return 0;
+fail:
+	kfree(data);
+	i2c_set_clientdata(tpa6130a2_client, NULL);
+	tpa6130a2_client = NULL;
+
+	return ret;
+}
+
+static int tpa6130a2_remove(struct i2c_client *client)
+{
+	struct tpa6130a2_data *data = i2c_get_clientdata(client);
+
+	tpa6130a2_power(0);
+
+	if (data->power_gpio >= 0)
+		gpio_free(data->power_gpio);
+	kfree(data);
+	tpa6130a2_client = NULL;
+
+	return 0;
+}
+
+static const struct i2c_device_id tpa6130a2_id[] = {
+	{ "tpa6130a2", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
+
+static struct i2c_driver tpa6130a2_i2c_driver = {
+	.driver = {
+		.name = "tpa6130a2",
+		.owner = THIS_MODULE,
+	},
+	.probe = tpa6130a2_probe,
+	.remove = __devexit_p(tpa6130a2_remove),
+	.id_table = tpa6130a2_id,
+};
+
+static int __init tpa6130a2_init(void)
+{
+	return i2c_add_driver(&tpa6130a2_i2c_driver);
+}
+
+static void __exit tpa6130a2_exit(void)
+{
+	i2c_del_driver(&tpa6130a2_i2c_driver);
+}
+
+MODULE_AUTHOR("Peter Ujfalusi");
+MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
+MODULE_LICENSE("GPL");
+
+module_init(tpa6130a2_init);
+module_exit(tpa6130a2_exit);
diff --git a/sound/soc/codecs/tpa6130a2.h b/sound/soc/codecs/tpa6130a2.h
new file mode 100644
index 0000000..57e867f
--- /dev/null
+++ b/sound/soc/codecs/tpa6130a2.h
@@ -0,0 +1,61 @@
+/*
+ * ALSA SoC TPA6130A2 amplifier driver
+ *
+ * Copyright (C) Nokia Corporation
+ *
+ * Author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __TPA6130A2_H__
+#define __TPA6130A2_H__
+
+/* Register addresses */
+#define TPA6130A2_REG_CONTROL		0x01
+#define TPA6130A2_REG_VOL_MUTE		0x02
+#define TPA6130A2_REG_OUT_IMPEDANCE	0x03
+#define TPA6130A2_REG_VERSION		0x04
+
+#define TPA6130A2_CACHEREGNUM	(TPA6130A2_REG_VERSION + 1)
+
+/* Register bits */
+/* TPA6130A2_REG_CONTROL (0x01) */
+#define TPA6130A2_SWS			(0x01 << 0)
+#define TPA6130A2_TERMAL		(0x01 << 1)
+#define TPA6130A2_MODE(x)		(x << 4)
+#define TPA6130A2_MODE_STEREO		(0x00)
+#define TPA6130A2_MODE_DUAL_MONO	(0x01)
+#define TPA6130A2_MODE_BRIDGE		(0x02)
+#define TPA6130A2_MODE_MASK		(0x03)
+#define TPA6130A2_HP_EN_R		(0x01 << 6)
+#define TPA6130A2_HP_EN_L		(0x01 << 7)
+
+/* TPA6130A2_REG_VOL_MUTE (0x02) */
+#define TPA6130A2_VOLUME(x)		((x & 0x3f) << 0)
+#define TPA6130A2_MUTE_R		(0x01 << 6)
+#define TPA6130A2_MUTE_L		(0x01 << 7)
+
+/* TPA6130A2_REG_OUT_IMPEDANCE (0x03) */
+#define TPA6130A2_HIZ_R			(0x01 << 0)
+#define TPA6130A2_HIZ_L			(0x01 << 1)
+
+/* TPA6130A2_REG_VERSION (0x04) */
+#define TPA6130A2_VERSION_MASK		(0x0f)
+
+extern int tpa6130a2_add_controls(struct snd_soc_codec *codec);
+
+#endif /* __TPA6130A2_H__ */
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 4df7c6c..5f1681f 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -120,9 +120,10 @@
 
 /* codec private data */
 struct twl4030_priv {
-	unsigned int bypass_state;
+	struct snd_soc_codec codec;
+
 	unsigned int codec_powered;
-	unsigned int codec_muted;
+	unsigned int apll_enabled;
 
 	struct snd_pcm_substream *master_substream;
 	struct snd_pcm_substream *slave_substream;
@@ -183,19 +184,20 @@
 static void twl4030_codec_enable(struct snd_soc_codec *codec, int enable)
 {
 	struct twl4030_priv *twl4030 = codec->private_data;
-	u8 mode;
+	int mode;
 
 	if (enable == twl4030->codec_powered)
 		return;
 
-	mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
 	if (enable)
-		mode |= TWL4030_CODECPDZ;
+		mode = twl4030_codec_enable_resource(TWL4030_CODEC_RES_POWER);
 	else
-		mode &= ~TWL4030_CODECPDZ;
+		mode = twl4030_codec_disable_resource(TWL4030_CODEC_RES_POWER);
 
-	twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
-	twl4030->codec_powered = enable;
+	if (mode >= 0) {
+		twl4030_write_reg_cache(codec, TWL4030_REG_CODEC_MODE, mode);
+		twl4030->codec_powered = enable;
+	}
 
 	/* REVISIT: this delay is present in TI sample drivers */
 	/* but there seems to be no TRM requirement for it     */
@@ -212,31 +214,30 @@
 
 	/* set all audio section registers to reasonable defaults */
 	for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
-		twl4030_write(codec, i,	cache[i]);
+		if (i != TWL4030_REG_APLL_CTL)
+			twl4030_write(codec, i,	cache[i]);
 
 }
 
-static void twl4030_codec_mute(struct snd_soc_codec *codec, int mute)
+static void twl4030_apll_enable(struct snd_soc_codec *codec, int enable)
 {
 	struct twl4030_priv *twl4030 = codec->private_data;
-	u8 reg_val;
+	int status;
 
-	if (mute == twl4030->codec_muted)
+	if (enable == twl4030->apll_enabled)
 		return;
 
-	if (mute) {
-		/* Disable PLL */
-		reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
-		reg_val &= ~TWL4030_APLL_EN;
-		twl4030_write(codec, TWL4030_REG_APLL_CTL, reg_val);
-	} else {
+	if (enable)
 		/* Enable PLL */
-		reg_val = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL);
-		reg_val |= TWL4030_APLL_EN;
-		twl4030_write(codec, TWL4030_REG_APLL_CTL, reg_val);
-	}
+		status = twl4030_codec_enable_resource(TWL4030_CODEC_RES_APLL);
+	else
+		/* Disable PLL */
+		status = twl4030_codec_disable_resource(TWL4030_CODEC_RES_APLL);
 
-	twl4030->codec_muted = mute;
+	if (status >= 0)
+		twl4030_write_reg_cache(codec, TWL4030_REG_APLL_CTL, status);
+
+	twl4030->apll_enabled = enable;
 }
 
 static void twl4030_power_up(struct snd_soc_codec *codec)
@@ -613,6 +614,27 @@
 	return 0;
 }
 
+static int vibramux_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	twl4030_write(w->codec, TWL4030_REG_VIBRA_SET, 0xff);
+	return 0;
+}
+
+static int apll_event(struct snd_soc_dapm_widget *w,
+		struct snd_kcontrol *kcontrol, int event)
+{
+	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		twl4030_apll_enable(w->codec, 1);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		twl4030_apll_enable(w->codec, 0);
+		break;
+	}
+	return 0;
+}
+
 static void headset_ramp(struct snd_soc_codec *codec, int ramp)
 {
 	struct snd_soc_device *socdev = codec->socdev;
@@ -724,67 +746,6 @@
 	return 0;
 }
 
-static int bypass_event(struct snd_soc_dapm_widget *w,
-		struct snd_kcontrol *kcontrol, int event)
-{
-	struct soc_mixer_control *m =
-		(struct soc_mixer_control *)w->kcontrols->private_value;
-	struct twl4030_priv *twl4030 = w->codec->private_data;
-	unsigned char reg, misc;
-
-	reg = twl4030_read_reg_cache(w->codec, m->reg);
-
-	/*
-	 * bypass_state[0:3] - analog HiFi bypass
-	 * bypass_state[4]   - analog voice bypass
-	 * bypass_state[5]   - digital voice bypass
-	 * bypass_state[6:7] - digital HiFi bypass
-	 */
-	if (m->reg == TWL4030_REG_VSTPGA) {
-		/* Voice digital bypass */
-		if (reg)
-			twl4030->bypass_state |= (1 << 5);
-		else
-			twl4030->bypass_state &= ~(1 << 5);
-	} else if (m->reg <= TWL4030_REG_ARXR2_APGA_CTL) {
-		/* Analog bypass */
-		if (reg & (1 << m->shift))
-			twl4030->bypass_state |=
-				(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL));
-		else
-			twl4030->bypass_state &=
-				~(1 << (m->reg - TWL4030_REG_ARXL1_APGA_CTL));
-	} else if (m->reg == TWL4030_REG_VDL_APGA_CTL) {
-		/* Analog voice bypass */
-		if (reg & (1 << m->shift))
-			twl4030->bypass_state |= (1 << 4);
-		else
-			twl4030->bypass_state &= ~(1 << 4);
-	} else {
-		/* Digital bypass */
-		if (reg & (0x7 << m->shift))
-			twl4030->bypass_state |= (1 << (m->shift ? 7 : 6));
-		else
-			twl4030->bypass_state &= ~(1 << (m->shift ? 7 : 6));
-	}
-
-	/* Enable master analog loopback mode if any analog switch is enabled*/
-	misc = twl4030_read_reg_cache(w->codec, TWL4030_REG_MISC_SET_1);
-	if (twl4030->bypass_state & 0x1F)
-		misc |= TWL4030_FMLOOP_EN;
-	else
-		misc &= ~TWL4030_FMLOOP_EN;
-	twl4030_write(w->codec, TWL4030_REG_MISC_SET_1, misc);
-
-	if (w->codec->bias_level == SND_SOC_BIAS_STANDBY) {
-		if (twl4030->bypass_state)
-			twl4030_codec_mute(w->codec, 0);
-		else
-			twl4030_codec_mute(w->codec, 1);
-	}
-	return 0;
-}
-
 /*
  * Some of the gain controls in TWL (mostly those which are associated with
  * the outputs) are implemented in an interesting way:
@@ -1192,32 +1153,28 @@
 			SND_SOC_NOPM, 0, 0),
 
 	/* Analog bypasses */
-	SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_abypassr1_control, bypass_event,
-			SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_SWITCH_E("Left1 Analog Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_abypassl1_control,
-			bypass_event, SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_SWITCH_E("Right2 Analog Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_abypassr2_control,
-			bypass_event, SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_SWITCH_E("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_abypassl2_control,
-			bypass_event, SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_SWITCH_E("Voice Analog Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_abypassv_control,
-			bypass_event, SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassr1_control),
+	SND_SOC_DAPM_SWITCH("Left1 Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassl1_control),
+	SND_SOC_DAPM_SWITCH("Right2 Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassr2_control),
+	SND_SOC_DAPM_SWITCH("Left2 Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassl2_control),
+	SND_SOC_DAPM_SWITCH("Voice Analog Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_abypassv_control),
+
+	/* Master analog loopback switch */
+	SND_SOC_DAPM_SUPPLY("FM Loop Enable", TWL4030_REG_MISC_SET_1, 5, 0,
+			    NULL, 0),
 
 	/* Digital bypasses */
-	SND_SOC_DAPM_SWITCH_E("Left Digital Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_dbypassl_control, bypass_event,
-			SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_SWITCH_E("Right Digital Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_dbypassr_control, bypass_event,
-			SND_SOC_DAPM_POST_REG),
-	SND_SOC_DAPM_SWITCH_E("Voice Digital Loopback", SND_SOC_NOPM, 0, 0,
-			&twl4030_dapm_dbypassv_control, bypass_event,
-			SND_SOC_DAPM_POST_REG),
+	SND_SOC_DAPM_SWITCH("Left Digital Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_dbypassl_control),
+	SND_SOC_DAPM_SWITCH("Right Digital Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_dbypassr_control),
+	SND_SOC_DAPM_SWITCH("Voice Digital Loopback", SND_SOC_NOPM, 0, 0,
+			&twl4030_dapm_dbypassv_control),
 
 	/* Digital mixers, power control for the physical DACs */
 	SND_SOC_DAPM_MIXER("Digital R1 Playback Mixer",
@@ -1243,6 +1200,9 @@
 	SND_SOC_DAPM_MIXER("Analog Voice Playback Mixer",
 			TWL4030_REG_VDL_APGA_CTL, 0, 0, NULL, 0),
 
+	SND_SOC_DAPM_SUPPLY("APLL Enable", SND_SOC_NOPM, 0, 0, apll_event,
+			    SND_SOC_DAPM_PRE_PMU|SND_SOC_DAPM_POST_PMD),
+
 	/* Output MIXER controls */
 	/* Earpiece */
 	SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0,
@@ -1308,8 +1268,9 @@
 			0, 0, NULL, 0, handsfreerpga_event,
 			SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
 	/* Vibra */
-	SND_SOC_DAPM_MUX("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0,
-		&twl4030_dapm_vibra_control),
+	SND_SOC_DAPM_MUX_E("Vibra Mux", TWL4030_REG_VIBRA_CTL, 0, 0,
+			   &twl4030_dapm_vibra_control, vibramux_event,
+			   SND_SOC_DAPM_PRE_PMU),
 	SND_SOC_DAPM_MUX("Vibra Route", SND_SOC_NOPM, 0, 0,
 		&twl4030_dapm_vibrapath_control),
 
@@ -1369,6 +1330,13 @@
 	{"Digital R2 Playback Mixer", NULL, "DAC Right2"},
 	{"Digital Voice Playback Mixer", NULL, "DAC Voice"},
 
+	/* Supply for the digital part (APLL) */
+	{"Digital R1 Playback Mixer", NULL, "APLL Enable"},
+	{"Digital L1 Playback Mixer", NULL, "APLL Enable"},
+	{"Digital R2 Playback Mixer", NULL, "APLL Enable"},
+	{"Digital L2 Playback Mixer", NULL, "APLL Enable"},
+	{"Digital Voice Playback Mixer", NULL, "APLL Enable"},
+
 	{"Analog L1 Playback Mixer", NULL, "Digital L1 Playback Mixer"},
 	{"Analog R1 Playback Mixer", NULL, "Digital R1 Playback Mixer"},
 	{"Analog L2 Playback Mixer", NULL, "Digital L2 Playback Mixer"},
@@ -1482,6 +1450,11 @@
 	{"ADC Virtual Left2", NULL, "TX2 Capture Route"},
 	{"ADC Virtual Right2", NULL, "TX2 Capture Route"},
 
+	{"ADC Virtual Left1", NULL, "APLL Enable"},
+	{"ADC Virtual Right1", NULL, "APLL Enable"},
+	{"ADC Virtual Left2", NULL, "APLL Enable"},
+	{"ADC Virtual Right2", NULL, "APLL Enable"},
+
 	/* Analog bypass routes */
 	{"Right1 Analog Loopback", "Switch", "Analog Right"},
 	{"Left1 Analog Loopback", "Switch", "Analog Left"},
@@ -1489,6 +1462,13 @@
 	{"Left2 Analog Loopback", "Switch", "Analog Left"},
 	{"Voice Analog Loopback", "Switch", "Analog Left"},
 
+	/* Supply for the Analog loopbacks */
+	{"Right1 Analog Loopback", NULL, "FM Loop Enable"},
+	{"Left1 Analog Loopback", NULL, "FM Loop Enable"},
+	{"Right2 Analog Loopback", NULL, "FM Loop Enable"},
+	{"Left2 Analog Loopback", NULL, "FM Loop Enable"},
+	{"Voice Analog Loopback", NULL, "FM Loop Enable"},
+
 	{"Analog R1 Playback Mixer", NULL, "Right1 Analog Loopback"},
 	{"Analog L1 Playback Mixer", NULL, "Left1 Analog Loopback"},
 	{"Analog R2 Playback Mixer", NULL, "Right2 Analog Loopback"},
@@ -1513,32 +1493,20 @@
 
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
 static int twl4030_set_bias_level(struct snd_soc_codec *codec,
 				  enum snd_soc_bias_level level)
 {
-	struct twl4030_priv *twl4030 = codec->private_data;
-
 	switch (level) {
 	case SND_SOC_BIAS_ON:
-		twl4030_codec_mute(codec, 0);
 		break;
 	case SND_SOC_BIAS_PREPARE:
-		twl4030_power_up(codec);
-		if (twl4030->bypass_state)
-			twl4030_codec_mute(codec, 0);
-		else
-			twl4030_codec_mute(codec, 1);
 		break;
 	case SND_SOC_BIAS_STANDBY:
-		twl4030_power_up(codec);
-		if (twl4030->bypass_state)
-			twl4030_codec_mute(codec, 0);
-		else
-			twl4030_codec_mute(codec, 1);
+		if (codec->bias_level == SND_SOC_BIAS_OFF)
+			twl4030_power_up(codec);
 		break;
 	case SND_SOC_BIAS_OFF:
 		twl4030_power_down(codec);
@@ -1785,29 +1753,23 @@
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct twl4030_priv *twl4030 = codec->private_data;
-	u8 infreq;
 
 	switch (freq) {
 	case 19200000:
-		infreq = TWL4030_APLL_INFREQ_19200KHZ;
-		twl4030->sysclk = 19200;
-		break;
 	case 26000000:
-		infreq = TWL4030_APLL_INFREQ_26000KHZ;
-		twl4030->sysclk = 26000;
-		break;
 	case 38400000:
-		infreq = TWL4030_APLL_INFREQ_38400KHZ;
-		twl4030->sysclk = 38400;
 		break;
 	default:
-		printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
-			freq);
+		dev_err(codec->dev, "Unsupported APLL mclk: %u\n", freq);
 		return -EINVAL;
 	}
 
-	infreq |= TWL4030_APLL_EN;
-	twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
+	if ((freq / 1000) != twl4030->sysclk) {
+		dev_err(codec->dev,
+			"Mismatch in APLL mclk: %u (configured: %u)\n",
+			freq, twl4030->sysclk * 1000);
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -1905,18 +1867,16 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->card->codec;
-	u8 infreq;
+	struct twl4030_priv *twl4030 = codec->private_data;
 	u8 mode;
 
 	/* If the system master clock is not 26MHz, the voice PCM interface is
 	 * not avilable.
 	 */
-	infreq = twl4030_read_reg_cache(codec, TWL4030_REG_APLL_CTL)
-		& TWL4030_APLL_INFREQ;
-
-	if (infreq != TWL4030_APLL_INFREQ_26000KHZ) {
-		printk(KERN_ERR "TWL4030 voice startup: "
-			"MCLK is not 26MHz, call set_sysclk() on init\n");
+	if (twl4030->sysclk != 26000) {
+		dev_err(codec->dev, "The board is configured for %u Hz, while"
+			"the Voice interface needs 26MHz APLL mclk\n",
+			twl4030->sysclk * 1000);
 		return -EINVAL;
 	}
 
@@ -1989,21 +1949,19 @@
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u8 infreq;
+	struct twl4030_priv *twl4030 = codec->private_data;
 
-	switch (freq) {
-	case 26000000:
-		infreq = TWL4030_APLL_INFREQ_26000KHZ;
-		break;
-	default:
-		printk(KERN_ERR "TWL4030 voice set sysclk: unknown rate %d\n",
-			freq);
+	if (freq != 26000000) {
+		dev_err(codec->dev, "Unsupported APLL mclk: %u, the Voice"
+			"interface needs 26MHz APLL mclk\n", freq);
 		return -EINVAL;
 	}
-
-	infreq |= TWL4030_APLL_EN;
-	twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
-
+	if ((freq / 1000) != twl4030->sysclk) {
+		dev_err(codec->dev,
+			"Mismatch in APLL mclk: %u (configured: %u)\n",
+			freq, twl4030->sysclk * 1000);
+		return -EINVAL;
+	}
 	return 0;
 }
 
@@ -2121,7 +2079,7 @@
 };
 EXPORT_SYMBOL_GPL(twl4030_dai);
 
-static int twl4030_suspend(struct platform_device *pdev, pm_message_t state)
+static int twl4030_soc_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
@@ -2131,7 +2089,7 @@
 	return 0;
 }
 
-static int twl4030_resume(struct platform_device *pdev)
+static int twl4030_soc_resume(struct platform_device *pdev)
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
@@ -2141,19 +2099,92 @@
 	return 0;
 }
 
-/*
- * initialize the driver
- * register the mixer and dsp interfaces with the kernel
- */
+static struct snd_soc_codec *twl4030_codec;
 
-static int twl4030_init(struct snd_soc_device *socdev)
+static int twl4030_soc_probe(struct platform_device *pdev)
 {
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct twl4030_setup_data *setup = socdev->codec_data;
-	struct twl4030_priv *twl4030 = codec->private_data;
-	int ret = 0;
+	struct snd_soc_codec *codec;
+	struct twl4030_priv *twl4030;
+	int ret;
 
-	printk(KERN_INFO "TWL4030 Audio Codec init \n");
+	BUG_ON(!twl4030_codec);
+
+	codec = twl4030_codec;
+	twl4030 = codec->private_data;
+	socdev->card->codec = codec;
+
+	/* Configuration for headset ramp delay from setup data */
+	if (setup) {
+		unsigned char hs_pop;
+
+		if (setup->sysclk != twl4030->sysclk)
+			dev_warn(&pdev->dev,
+				 "Mismatch in APLL mclk: %u (configured: %u)\n",
+				 setup->sysclk, twl4030->sysclk);
+
+		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+		hs_pop &= ~TWL4030_RAMP_DELAY;
+		hs_pop |= (setup->ramp_delay_value << 2);
+		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
+	}
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to create pcms\n");
+		return ret;
+	}
+
+	snd_soc_add_controls(codec, twl4030_snd_controls,
+				ARRAY_SIZE(twl4030_snd_controls));
+	twl4030_add_widgets(codec);
+
+	return 0;
+}
+
+static int twl4030_soc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+	kfree(codec->private_data);
+	kfree(codec);
+
+	return 0;
+}
+
+static int __devinit twl4030_codec_probe(struct platform_device *pdev)
+{
+	struct twl4030_codec_audio_data *pdata = pdev->dev.platform_data;
+	struct snd_soc_codec *codec;
+	struct twl4030_priv *twl4030;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform_data is missing\n");
+		return -EINVAL;
+	}
+
+	twl4030 = kzalloc(sizeof(struct twl4030_priv), GFP_KERNEL);
+	if (twl4030 == NULL) {
+		dev_err(&pdev->dev, "Can not allocate memroy\n");
+		return -ENOMEM;
+	}
+
+	codec = &twl4030->codec;
+	codec->private_data = twl4030;
+	codec->dev = &pdev->dev;
+	twl4030_dai[0].dev = &pdev->dev;
+	twl4030_dai[1].dev = &pdev->dev;
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
 
 	codec->name = "twl4030";
 	codec->owner = THIS_MODULE;
@@ -2165,123 +2196,84 @@
 	codec->reg_cache_size = sizeof(twl4030_reg);
 	codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
 					GFP_KERNEL);
-	if (codec->reg_cache == NULL)
-		return -ENOMEM;
-
-	/* Configuration for headset ramp delay from setup data */
-	if (setup) {
-		unsigned char hs_pop;
-
-		if (setup->sysclk)
-			twl4030->sysclk = setup->sysclk;
-		else
-			twl4030->sysclk = 26000;
-
-		hs_pop = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
-		hs_pop &= ~TWL4030_RAMP_DELAY;
-		hs_pop |= (setup->ramp_delay_value << 2);
-		twl4030_write_reg_cache(codec, TWL4030_REG_HS_POPN_SET, hs_pop);
-	} else {
-		twl4030->sysclk = 26000;
+	if (codec->reg_cache == NULL) {
+		ret = -ENOMEM;
+		goto error_cache;
 	}
 
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		printk(KERN_ERR "twl4030: failed to create pcms\n");
-		goto pcm_err;
-	}
+	platform_set_drvdata(pdev, twl4030);
+	twl4030_codec = codec;
 
+	/* Set the defaults, and power up the codec */
+	twl4030->sysclk = twl4030_codec_get_mclk() / 1000;
 	twl4030_init_chip(codec);
-
-	/* power on device */
+	codec->bias_level = SND_SOC_BIAS_OFF;
 	twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
-	snd_soc_add_controls(codec, twl4030_snd_controls,
-				ARRAY_SIZE(twl4030_snd_controls));
-	twl4030_add_widgets(codec);
-
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "twl4030: failed to register card\n");
-		goto card_err;
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto error_codec;
 	}
 
-	return ret;
+	ret = snd_soc_register_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAIs: %d\n", ret);
+		snd_soc_unregister_codec(codec);
+		goto error_codec;
+	}
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-pcm_err:
+	return 0;
+
+error_codec:
+	twl4030_power_down(codec);
 	kfree(codec->reg_cache);
+error_cache:
+	kfree(twl4030);
 	return ret;
 }
 
-static struct snd_soc_device *twl4030_socdev;
-
-static int twl4030_probe(struct platform_device *pdev)
+static int __devexit twl4030_codec_remove(struct platform_device *pdev)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec;
-	struct twl4030_priv *twl4030;
+	struct twl4030_priv *twl4030 = platform_get_drvdata(pdev);
 
-	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
-	if (codec == NULL)
-		return -ENOMEM;
+	kfree(twl4030);
 
-	twl4030 = kzalloc(sizeof(struct twl4030_priv), GFP_KERNEL);
-	if (twl4030 == NULL) {
-		kfree(codec);
-		return -ENOMEM;
-	}
-
-	codec->private_data = twl4030;
-	socdev->card->codec = codec;
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-
-	twl4030_socdev = socdev;
-	twl4030_init(socdev);
-
+	twl4030_codec = NULL;
 	return 0;
 }
 
-static int twl4030_remove(struct platform_device *pdev)
-{
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
+MODULE_ALIAS("platform:twl4030_codec_audio");
 
-	printk(KERN_INFO "TWL4030 Audio Codec remove\n");
-	twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-	kfree(codec->private_data);
-	kfree(codec);
-
-	return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_twl4030 = {
-	.probe = twl4030_probe,
-	.remove = twl4030_remove,
-	.suspend = twl4030_suspend,
-	.resume = twl4030_resume,
+static struct platform_driver twl4030_codec_driver = {
+	.probe		= twl4030_codec_probe,
+	.remove		= __devexit_p(twl4030_codec_remove),
+	.driver		= {
+		.name	= "twl4030_codec_audio",
+		.owner	= THIS_MODULE,
+	},
 };
-EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
 
 static int __init twl4030_modinit(void)
 {
-	return snd_soc_register_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
+	return platform_driver_register(&twl4030_codec_driver);
 }
 module_init(twl4030_modinit);
 
 static void __exit twl4030_exit(void)
 {
-	snd_soc_unregister_dais(&twl4030_dai[0], ARRAY_SIZE(twl4030_dai));
+	platform_driver_unregister(&twl4030_codec_driver);
 }
 module_exit(twl4030_exit);
 
+struct snd_soc_codec_device soc_codec_dev_twl4030 = {
+	.probe = twl4030_soc_probe,
+	.remove = twl4030_soc_remove,
+	.suspend = twl4030_soc_suspend,
+	.resume = twl4030_soc_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
+
 MODULE_DESCRIPTION("ASoC TWL4030 codec driver");
 MODULE_AUTHOR("Steve Sakoman");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
index 2b4bfa2..dd6396e 100644
--- a/sound/soc/codecs/twl4030.h
+++ b/sound/soc/codecs/twl4030.h
@@ -22,245 +22,13 @@
 #ifndef __TWL4030_AUDIO_H__
 #define __TWL4030_AUDIO_H__
 
-#define TWL4030_REG_CODEC_MODE		0x1
-#define TWL4030_REG_OPTION		0x2
-#define TWL4030_REG_UNKNOWN		0x3
-#define TWL4030_REG_MICBIAS_CTL		0x4
-#define TWL4030_REG_ANAMICL		0x5
-#define TWL4030_REG_ANAMICR		0x6
-#define TWL4030_REG_AVADC_CTL		0x7
-#define TWL4030_REG_ADCMICSEL		0x8
-#define TWL4030_REG_DIGMIXING		0x9
-#define TWL4030_REG_ATXL1PGA		0xA
-#define TWL4030_REG_ATXR1PGA		0xB
-#define TWL4030_REG_AVTXL2PGA		0xC
-#define TWL4030_REG_AVTXR2PGA		0xD
-#define TWL4030_REG_AUDIO_IF		0xE
-#define TWL4030_REG_VOICE_IF		0xF
-#define TWL4030_REG_ARXR1PGA		0x10
-#define TWL4030_REG_ARXL1PGA		0x11
-#define TWL4030_REG_ARXR2PGA		0x12
-#define TWL4030_REG_ARXL2PGA		0x13
-#define TWL4030_REG_VRXPGA		0x14
-#define TWL4030_REG_VSTPGA		0x15
-#define TWL4030_REG_VRX2ARXPGA		0x16
-#define TWL4030_REG_AVDAC_CTL		0x17
-#define TWL4030_REG_ARX2VTXPGA		0x18
-#define TWL4030_REG_ARXL1_APGA_CTL	0x19
-#define TWL4030_REG_ARXR1_APGA_CTL	0x1A
-#define TWL4030_REG_ARXL2_APGA_CTL	0x1B
-#define TWL4030_REG_ARXR2_APGA_CTL	0x1C
-#define TWL4030_REG_ATX2ARXPGA		0x1D
-#define TWL4030_REG_BT_IF		0x1E
-#define TWL4030_REG_BTPGA		0x1F
-#define TWL4030_REG_BTSTPGA		0x20
-#define TWL4030_REG_EAR_CTL		0x21
-#define TWL4030_REG_HS_SEL		0x22
-#define TWL4030_REG_HS_GAIN_SET		0x23
-#define TWL4030_REG_HS_POPN_SET		0x24
-#define TWL4030_REG_PREDL_CTL		0x25
-#define TWL4030_REG_PREDR_CTL		0x26
-#define TWL4030_REG_PRECKL_CTL		0x27
-#define TWL4030_REG_PRECKR_CTL		0x28
-#define TWL4030_REG_HFL_CTL		0x29
-#define TWL4030_REG_HFR_CTL		0x2A
-#define TWL4030_REG_ALC_CTL		0x2B
-#define TWL4030_REG_ALC_SET1		0x2C
-#define TWL4030_REG_ALC_SET2		0x2D
-#define TWL4030_REG_BOOST_CTL		0x2E
-#define TWL4030_REG_SOFTVOL_CTL		0x2F
-#define TWL4030_REG_DTMF_FREQSEL	0x30
-#define TWL4030_REG_DTMF_TONEXT1H	0x31
-#define TWL4030_REG_DTMF_TONEXT1L	0x32
-#define TWL4030_REG_DTMF_TONEXT2H	0x33
-#define TWL4030_REG_DTMF_TONEXT2L	0x34
-#define TWL4030_REG_DTMF_TONOFF		0x35
-#define TWL4030_REG_DTMF_WANONOFF	0x36
-#define TWL4030_REG_I2S_RX_SCRAMBLE_H	0x37
-#define TWL4030_REG_I2S_RX_SCRAMBLE_M	0x38
-#define TWL4030_REG_I2S_RX_SCRAMBLE_L	0x39
-#define TWL4030_REG_APLL_CTL		0x3A
-#define TWL4030_REG_DTMF_CTL		0x3B
-#define TWL4030_REG_DTMF_PGA_CTL2	0x3C
-#define TWL4030_REG_DTMF_PGA_CTL1	0x3D
-#define TWL4030_REG_MISC_SET_1		0x3E
-#define TWL4030_REG_PCMBTMUX		0x3F
-#define TWL4030_REG_RX_PATH_SEL		0x43
-#define TWL4030_REG_VDL_APGA_CTL	0x44
-#define TWL4030_REG_VIBRA_CTL		0x45
-#define TWL4030_REG_VIBRA_SET		0x46
-#define TWL4030_REG_VIBRA_PWM_SET	0x47
-#define TWL4030_REG_ANAMIC_GAIN		0x48
-#define TWL4030_REG_MISC_SET_2		0x49
+/* Register descriptions are here */
+#include <linux/mfd/twl4030-codec.h>
+
+/* Sgadow register used by the audio driver */
 #define TWL4030_REG_SW_SHADOW		0x4A
-
 #define TWL4030_CACHEREGNUM	(TWL4030_REG_SW_SHADOW + 1)
 
-/* Bitfield Definitions */
-
-/* TWL4030_CODEC_MODE (0x01) Fields */
-
-#define TWL4030_APLL_RATE		0xF0
-#define TWL4030_APLL_RATE_8000		0x00
-#define TWL4030_APLL_RATE_11025		0x10
-#define TWL4030_APLL_RATE_12000		0x20
-#define TWL4030_APLL_RATE_16000		0x40
-#define TWL4030_APLL_RATE_22050		0x50
-#define TWL4030_APLL_RATE_24000		0x60
-#define TWL4030_APLL_RATE_32000		0x80
-#define TWL4030_APLL_RATE_44100		0x90
-#define TWL4030_APLL_RATE_48000		0xA0
-#define TWL4030_APLL_RATE_96000		0xE0
-#define TWL4030_SEL_16K			0x08
-#define TWL4030_CODECPDZ		0x02
-#define TWL4030_OPT_MODE		0x01
-#define TWL4030_OPTION_1		(1 << 0)
-#define TWL4030_OPTION_2		(0 << 0)
-
-/* TWL4030_OPTION (0x02) Fields */
-
-#define TWL4030_ATXL1_EN		(1 << 0)
-#define TWL4030_ATXR1_EN		(1 << 1)
-#define TWL4030_ATXL2_VTXL_EN		(1 << 2)
-#define TWL4030_ATXR2_VTXR_EN		(1 << 3)
-#define TWL4030_ARXL1_VRX_EN		(1 << 4)
-#define TWL4030_ARXR1_EN		(1 << 5)
-#define TWL4030_ARXL2_EN		(1 << 6)
-#define TWL4030_ARXR2_EN		(1 << 7)
-
-/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
-
-#define TWL4030_MICBIAS2_CTL		0x40
-#define TWL4030_MICBIAS1_CTL		0x20
-#define TWL4030_HSMICBIAS_EN		0x04
-#define TWL4030_MICBIAS2_EN		0x02
-#define TWL4030_MICBIAS1_EN		0x01
-
-/* ANAMICL (0x05) Fields */
-
-#define TWL4030_CNCL_OFFSET_START	0x80
-#define TWL4030_OFFSET_CNCL_SEL		0x60
-#define TWL4030_OFFSET_CNCL_SEL_ARX1	0x00
-#define TWL4030_OFFSET_CNCL_SEL_ARX2	0x20
-#define TWL4030_OFFSET_CNCL_SEL_VRX	0x40
-#define TWL4030_OFFSET_CNCL_SEL_ALL	0x60
-#define TWL4030_MICAMPL_EN		0x10
-#define TWL4030_CKMIC_EN		0x08
-#define TWL4030_AUXL_EN			0x04
-#define TWL4030_HSMIC_EN		0x02
-#define TWL4030_MAINMIC_EN		0x01
-
-/* ANAMICR (0x06) Fields */
-
-#define TWL4030_MICAMPR_EN		0x10
-#define TWL4030_AUXR_EN			0x04
-#define TWL4030_SUBMIC_EN		0x01
-
-/* AVADC_CTL (0x07) Fields */
-
-#define TWL4030_ADCL_EN			0x08
-#define TWL4030_AVADC_CLK_PRIORITY	0x04
-#define TWL4030_ADCR_EN			0x02
-
-/* TWL4030_REG_ADCMICSEL (0x08) Fields */
-
-#define TWL4030_DIGMIC1_EN		0x08
-#define TWL4030_TX2IN_SEL		0x04
-#define TWL4030_DIGMIC0_EN		0x02
-#define TWL4030_TX1IN_SEL		0x01
-
-/* AUDIO_IF (0x0E) Fields */
-
-#define TWL4030_AIF_SLAVE_EN		0x80
-#define TWL4030_DATA_WIDTH		0x60
-#define TWL4030_DATA_WIDTH_16S_16W	0x00
-#define TWL4030_DATA_WIDTH_32S_16W	0x40
-#define TWL4030_DATA_WIDTH_32S_24W	0x60
-#define TWL4030_AIF_FORMAT		0x18
-#define TWL4030_AIF_FORMAT_CODEC	0x00
-#define TWL4030_AIF_FORMAT_LEFT		0x08
-#define TWL4030_AIF_FORMAT_RIGHT	0x10
-#define TWL4030_AIF_FORMAT_TDM		0x18
-#define TWL4030_AIF_TRI_EN		0x04
-#define TWL4030_CLK256FS_EN		0x02
-#define TWL4030_AIF_EN			0x01
-
-/* VOICE_IF (0x0F) Fields */
-
-#define TWL4030_VIF_SLAVE_EN		0x80
-#define TWL4030_VIF_DIN_EN		0x40
-#define TWL4030_VIF_DOUT_EN		0x20
-#define TWL4030_VIF_SWAP		0x10
-#define TWL4030_VIF_FORMAT		0x08
-#define TWL4030_VIF_TRI_EN		0x04
-#define TWL4030_VIF_SUB_EN		0x02
-#define TWL4030_VIF_EN			0x01
-
-/* EAR_CTL (0x21) */
-#define TWL4030_EAR_GAIN		0x30
-
-/* HS_GAIN_SET (0x23) Fields */
-
-#define TWL4030_HSR_GAIN		0x0C
-#define TWL4030_HSR_GAIN_PWR_DOWN	0x00
-#define TWL4030_HSR_GAIN_PLUS_6DB	0x04
-#define TWL4030_HSR_GAIN_0DB		0x08
-#define TWL4030_HSR_GAIN_MINUS_6DB	0x0C
-#define TWL4030_HSL_GAIN		0x03
-#define TWL4030_HSL_GAIN_PWR_DOWN	0x00
-#define TWL4030_HSL_GAIN_PLUS_6DB	0x01
-#define TWL4030_HSL_GAIN_0DB		0x02
-#define TWL4030_HSL_GAIN_MINUS_6DB	0x03
-
-/* HS_POPN_SET (0x24) Fields */
-
-#define TWL4030_VMID_EN			0x40
-#define	TWL4030_EXTMUTE			0x20
-#define TWL4030_RAMP_DELAY		0x1C
-#define TWL4030_RAMP_DELAY_20MS		0x00
-#define TWL4030_RAMP_DELAY_40MS		0x04
-#define TWL4030_RAMP_DELAY_81MS		0x08
-#define TWL4030_RAMP_DELAY_161MS	0x0C
-#define TWL4030_RAMP_DELAY_323MS	0x10
-#define TWL4030_RAMP_DELAY_645MS	0x14
-#define TWL4030_RAMP_DELAY_1291MS	0x18
-#define TWL4030_RAMP_DELAY_2581MS	0x1C
-#define TWL4030_RAMP_EN			0x02
-
-/* PREDL_CTL (0x25) */
-#define TWL4030_PREDL_GAIN		0x30
-
-/* PREDR_CTL (0x26) */
-#define TWL4030_PREDR_GAIN		0x30
-
-/* PRECKL_CTL (0x27) */
-#define TWL4030_PRECKL_GAIN		0x30
-
-/* PRECKR_CTL (0x28) */
-#define TWL4030_PRECKR_GAIN		0x30
-
-/* HFL_CTL (0x29, 0x2A) Fields */
-#define TWL4030_HF_CTL_HB_EN		0x04
-#define TWL4030_HF_CTL_LOOP_EN		0x08
-#define TWL4030_HF_CTL_RAMP_EN		0x10
-#define TWL4030_HF_CTL_REF_EN		0x20
-
-/* APLL_CTL (0x3A) Fields */
-
-#define TWL4030_APLL_EN			0x10
-#define TWL4030_APLL_INFREQ		0x0F
-#define TWL4030_APLL_INFREQ_19200KHZ	0x05
-#define TWL4030_APLL_INFREQ_26000KHZ	0x06
-#define TWL4030_APLL_INFREQ_38400KHZ	0x0F
-
-/* REG_MISC_SET_1 (0x3E) Fields */
-
-#define TWL4030_CLK64_EN		0x80
-#define TWL4030_SCRAMBLE_EN		0x40
-#define TWL4030_FMLOOP_EN		0x20
-#define TWL4030_SMOOTH_ANAVOL_EN	0x02
-#define TWL4030_DIGMIC_LR_SWAP_EN	0x01
-
 /* TWL4030_REG_SW_SHADOW (0x4A) Fields */
 #define TWL4030_HFL_EN			0x01
 #define TWL4030_HFR_EN			0x02
@@ -279,3 +47,5 @@
 };
 
 #endif	/* End of __TWL4030_AUDIO_H__ */
+
+
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index c33b92e..aa40d98 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -562,17 +562,8 @@
 		goto pcm_err;
 	}
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "UDA134X: failed to register card\n");
-		goto card_err;
-	}
-
 	return 0;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	kfree(codec->reg_cache);
 reg_err:
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index 92ec034..a2763c2 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -378,7 +378,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -713,17 +712,9 @@
 	snd_soc_add_controls(codec, uda1380_snd_controls,
 				ARRAY_SIZE(uda1380_snd_controls));
 	uda1380_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 593d5b9..f82125d 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -800,7 +800,7 @@
 		return ret;
 	}
 
-	return snd_soc_dapm_new_widgets(codec);
+	return 0;
 }
 
 static int wm8350_set_dai_sysclk(struct snd_soc_dai *codec_dai,
@@ -1101,7 +1101,7 @@
 }
 
 static int wm8350_set_fll(struct snd_soc_dai *codec_dai,
-			  int pll_id, unsigned int freq_in,
+			  int pll_id, int source, unsigned int freq_in,
 			  unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
@@ -1501,18 +1501,7 @@
 
 	wm8350_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to register card\n");
-		goto card_err;
-	}
-
 	return 0;
-
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-	return ret;
 }
 
 static int wm8350_remove(struct platform_device *pdev)
@@ -1680,21 +1669,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8350_codec_suspend(struct platform_device *pdev, pm_message_t m)
-{
-	return snd_soc_suspend_device(&pdev->dev);
-}
-
-static int wm8350_codec_resume(struct platform_device *pdev)
-{
-	return snd_soc_resume_device(&pdev->dev);
-}
-#else
-#define wm8350_codec_suspend NULL
-#define wm8350_codec_resume NULL
-#endif
-
 static struct platform_driver wm8350_codec_driver = {
 	.driver = {
 		   .name = "wm8350-codec",
@@ -1702,8 +1676,6 @@
 		   },
 	.probe = wm8350_codec_probe,
 	.remove = __devexit_p(wm8350_codec_remove),
-	.suspend = wm8350_codec_suspend,
-	.resume = wm8350_codec_resume,
 };
 
 static __init int wm8350_init(void)
diff --git a/sound/soc/codecs/wm8400.c b/sound/soc/codecs/wm8400.c
index b9ef4d9..b432f4d 100644
--- a/sound/soc/codecs/wm8400.c
+++ b/sound/soc/codecs/wm8400.c
@@ -915,7 +915,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -1011,7 +1010,8 @@
 }
 
 static int wm8400_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
-			      unsigned int freq_in, unsigned int freq_out)
+			      int source, unsigned int freq_in,
+			      unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct wm8400_priv *wm8400 = codec->private_data;
@@ -1399,17 +1399,6 @@
 	wm8400_add_controls(codec);
 	wm8400_add_widgets(codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to register card\n");
-		goto card_err;
-	}
-
-	return ret;
-
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -1558,21 +1547,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8400_pdev_suspend(struct platform_device *pdev, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&pdev->dev);
-}
-
-static int wm8400_pdev_resume(struct platform_device *pdev)
-{
-	return snd_soc_resume_device(&pdev->dev);
-}
-#else
-#define wm8400_pdev_suspend NULL
-#define wm8400_pdev_resume NULL
-#endif
-
 static struct platform_driver wm8400_codec_driver = {
 	.driver = {
 		.name = "wm8400-codec",
@@ -1580,8 +1554,6 @@
 	},
 	.probe = wm8400_codec_probe,
 	.remove	= __exit_p(wm8400_codec_remove),
-	.suspend = wm8400_pdev_suspend,
-	.resume = wm8400_pdev_resume,
 };
 
 static int __init wm8400_codec_init(void)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 060d5d0..265e68c 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -219,7 +219,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -271,8 +270,8 @@
 	pll_div.k = K;
 }
 
-static int wm8510_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8510_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	u16 reg;
@@ -604,16 +603,9 @@
 	snd_soc_add_controls(codec, wm8510_snd_controls,
 				ARRAY_SIZE(wm8510_snd_controls));
 	wm8510_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8510: failed to register card\n");
-		goto card_err;
-	}
+
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index 25870a4..d3a61d7 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -117,7 +117,6 @@
 
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -448,17 +447,9 @@
 	snd_soc_add_controls(codec, wm8523_snd_controls,
 			     ARRAY_SIZE(wm8523_snd_controls));
 	wm8523_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -638,21 +629,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8523_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&i2c->dev);
-}
-
-static int wm8523_i2c_resume(struct i2c_client *i2c)
-{
-	return snd_soc_resume_device(&i2c->dev);
-}
-#else
-#define wm8523_i2c_suspend NULL
-#define wm8523_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8523_i2c_id[] = {
 	{ "wm8523", 0 },
 	{ }
@@ -666,8 +642,6 @@
 	},
 	.probe =    wm8523_i2c_probe,
 	.remove =   __devexit_p(wm8523_i2c_remove),
-	.suspend =  wm8523_i2c_suspend,
-	.resume =   wm8523_i2c_resume,
 	.id_table = wm8523_i2c_id,
 };
 #endif
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index 6bded8c..d077df6 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -315,7 +315,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -407,8 +406,8 @@
 	return 0;
 }
 
-static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	int offset;
 	struct snd_soc_codec *codec = codec_dai->codec;
@@ -800,17 +799,9 @@
 	snd_soc_add_controls(codec, wm8580_snd_controls,
 			     ARRAY_SIZE(wm8580_snd_controls));
 	wm8580_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -961,21 +952,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8580_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8580_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8580_i2c_suspend NULL
-#define wm8580_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8580_i2c_id[] = {
 	{ "wm8580", 0 },
 	{ }
@@ -989,8 +965,6 @@
 	},
 	.probe =    wm8580_i2c_probe,
 	.remove =   wm8580_i2c_remove,
-	.suspend =  wm8580_i2c_suspend,
-	.resume =   wm8580_i2c_resume,
 	.id_table = wm8580_i2c_id,
 };
 #endif
diff --git a/sound/soc/codecs/wm8711.c b/sound/soc/codecs/wm8711.c
new file mode 100644
index 0000000..24a3560
--- /dev/null
+++ b/sound/soc/codecs/wm8711.c
@@ -0,0 +1,633 @@
+/*
+ * wm8711.c  --  WM8711 ALSA SoC Audio driver
+ *
+ * Copyright 2006 Wolfson Microelectronics
+ *
+ * Author: Mike Arthur <linux@wolfsonmicro.com>
+ *
+ * Based on wm8731.c by Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/tlv.h>
+#include <sound/initval.h>
+
+#include "wm8711.h"
+
+static struct snd_soc_codec *wm8711_codec;
+
+/* codec private data */
+struct wm8711_priv {
+	struct snd_soc_codec codec;
+	u16 reg_cache[WM8711_CACHEREGNUM];
+	unsigned int sysclk;
+};
+
+/*
+ * wm8711 register cache
+ * We can't read the WM8711 register space when we are
+ * using 2 wire for device control, so we cache them instead.
+ * There is no point in caching the reset register
+ */
+static const u16 wm8711_reg[WM8711_CACHEREGNUM] = {
+	0x0079, 0x0079, 0x000a, 0x0008,
+	0x009f, 0x000a, 0x0000, 0x0000
+};
+
+#define wm8711_reset(c)	snd_soc_write(c, WM8711_RESET, 0)
+
+static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
+
+static const struct snd_kcontrol_new wm8711_snd_controls[] = {
+
+SOC_DOUBLE_R_TLV("Master Playback Volume", WM8711_LOUT1V, WM8711_ROUT1V,
+		 0, 127, 0, out_tlv),
+SOC_DOUBLE_R("Master Playback ZC Switch", WM8711_LOUT1V, WM8711_ROUT1V,
+	7, 1, 0),
+
+};
+
+/* Output Mixer */
+static const struct snd_kcontrol_new wm8711_output_mixer_controls[] = {
+SOC_DAPM_SINGLE("Line Bypass Switch", WM8711_APANA, 3, 1, 0),
+SOC_DAPM_SINGLE("HiFi Playback Switch", WM8711_APANA, 4, 1, 0),
+};
+
+static const struct snd_soc_dapm_widget wm8711_dapm_widgets[] = {
+SND_SOC_DAPM_MIXER("Output Mixer", WM8711_PWR, 4, 1,
+	&wm8711_output_mixer_controls[0],
+	ARRAY_SIZE(wm8711_output_mixer_controls)),
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", WM8711_PWR, 3, 1),
+SND_SOC_DAPM_OUTPUT("LOUT"),
+SND_SOC_DAPM_OUTPUT("LHPOUT"),
+SND_SOC_DAPM_OUTPUT("ROUT"),
+SND_SOC_DAPM_OUTPUT("RHPOUT"),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+	/* output mixer */
+	{"Output Mixer", "Line Bypass Switch", "Line Input"},
+	{"Output Mixer", "HiFi Playback Switch", "DAC"},
+
+	/* outputs */
+	{"RHPOUT", NULL, "Output Mixer"},
+	{"ROUT", NULL, "Output Mixer"},
+	{"LHPOUT", NULL, "Output Mixer"},
+	{"LOUT", NULL, "Output Mixer"},
+};
+
+static int wm8711_add_widgets(struct snd_soc_codec *codec)
+{
+	snd_soc_dapm_new_controls(codec, wm8711_dapm_widgets,
+				  ARRAY_SIZE(wm8711_dapm_widgets));
+
+	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+	return 0;
+}
+
+struct _coeff_div {
+	u32 mclk;
+	u32 rate;
+	u16 fs;
+	u8 sr:4;
+	u8 bosr:1;
+	u8 usb:1;
+};
+
+/* codec mclk clock divider coefficients */
+static const struct _coeff_div coeff_div[] = {
+	/* 48k */
+	{12288000, 48000, 256, 0x0, 0x0, 0x0},
+	{18432000, 48000, 384, 0x0, 0x1, 0x0},
+	{12000000, 48000, 250, 0x0, 0x0, 0x1},
+
+	/* 32k */
+	{12288000, 32000, 384, 0x6, 0x0, 0x0},
+	{18432000, 32000, 576, 0x6, 0x1, 0x0},
+	{12000000, 32000, 375, 0x6, 0x0, 0x1},
+
+	/* 8k */
+	{12288000, 8000, 1536, 0x3, 0x0, 0x0},
+	{18432000, 8000, 2304, 0x3, 0x1, 0x0},
+	{11289600, 8000, 1408, 0xb, 0x0, 0x0},
+	{16934400, 8000, 2112, 0xb, 0x1, 0x0},
+	{12000000, 8000, 1500, 0x3, 0x0, 0x1},
+
+	/* 96k */
+	{12288000, 96000, 128, 0x7, 0x0, 0x0},
+	{18432000, 96000, 192, 0x7, 0x1, 0x0},
+	{12000000, 96000, 125, 0x7, 0x0, 0x1},
+
+	/* 44.1k */
+	{11289600, 44100, 256, 0x8, 0x0, 0x0},
+	{16934400, 44100, 384, 0x8, 0x1, 0x0},
+	{12000000, 44100, 272, 0x8, 0x1, 0x1},
+
+	/* 88.2k */
+	{11289600, 88200, 128, 0xf, 0x0, 0x0},
+	{16934400, 88200, 192, 0xf, 0x1, 0x0},
+	{12000000, 88200, 136, 0xf, 0x1, 0x1},
+};
+
+static inline int get_coeff(int mclk, int rate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(coeff_div); i++) {
+		if (coeff_div[i].rate == rate && coeff_div[i].mclk == mclk)
+			return i;
+	}
+	return 0;
+}
+
+static int wm8711_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params,
+	struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct wm8711_priv *wm8711 = codec->private_data;
+	u16 iface = snd_soc_read(codec, WM8711_IFACE) & 0xfffc;
+	int i = get_coeff(wm8711->sysclk, params_rate(params));
+	u16 srate = (coeff_div[i].sr << 2) |
+		(coeff_div[i].bosr << 1) | coeff_div[i].usb;
+
+	snd_soc_write(codec, WM8711_SRATE, srate);
+
+	/* bit size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		iface |= 0x0004;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		iface |= 0x0008;
+		break;
+	}
+
+	snd_soc_write(codec, WM8711_IFACE, iface);
+	return 0;
+}
+
+static int wm8711_pcm_prepare(struct snd_pcm_substream *substream,
+			      struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+
+	/* set active */
+	snd_soc_write(codec, WM8711_ACTIVE, 0x0001);
+
+	return 0;
+}
+
+static void wm8711_shutdown(struct snd_pcm_substream *substream,
+			    struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+
+	/* deactivate */
+	if (!codec->active) {
+		udelay(50);
+		snd_soc_write(codec, WM8711_ACTIVE, 0x0);
+	}
+}
+
+static int wm8711_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = snd_soc_read(codec, WM8711_APDIGI) & 0xfff7;
+
+	if (mute)
+		snd_soc_write(codec, WM8711_APDIGI, mute_reg | 0x8);
+	else
+		snd_soc_write(codec, WM8711_APDIGI, mute_reg);
+
+	return 0;
+}
+
+static int wm8711_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+		int clk_id, unsigned int freq, int dir)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	struct wm8711_priv *wm8711 = codec->private_data;
+
+	switch (freq) {
+	case 11289600:
+	case 12000000:
+	case 12288000:
+	case 16934400:
+	case 18432000:
+		wm8711->sysclk = freq;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int wm8711_set_dai_fmt(struct snd_soc_dai *codec_dai,
+		unsigned int fmt)
+{
+	struct snd_soc_codec *codec = codec_dai->codec;
+	u16 iface = 0;
+
+	/* set master/slave audio interface */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFM:
+		iface |= 0x0040;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* interface format */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		iface |= 0x0002;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		iface |= 0x0001;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		iface |= 0x0003;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		iface |= 0x0013;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		iface |= 0x0090;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		iface |= 0x0080;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		iface |= 0x0010;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set iface */
+	snd_soc_write(codec, WM8711_IFACE, iface);
+	return 0;
+}
+
+
+static int wm8711_set_bias_level(struct snd_soc_codec *codec,
+	enum snd_soc_bias_level level)
+{
+	u16 reg = snd_soc_read(codec, WM8711_PWR) & 0xff7f;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		snd_soc_write(codec, WM8711_PWR, reg);
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		snd_soc_write(codec, WM8711_PWR, reg | 0x0040);
+		break;
+	case SND_SOC_BIAS_OFF:
+		snd_soc_write(codec, WM8711_ACTIVE, 0x0);
+		snd_soc_write(codec, WM8711_PWR, 0xffff);
+		break;
+	}
+	codec->bias_level = level;
+	return 0;
+}
+
+#define WM8711_RATES SNDRV_PCM_RATE_8000_96000
+
+#define WM8711_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops wm8711_ops = {
+	.prepare = wm8711_pcm_prepare,
+	.hw_params = wm8711_hw_params,
+	.shutdown = wm8711_shutdown,
+	.digital_mute = wm8711_mute,
+	.set_sysclk = wm8711_set_dai_sysclk,
+	.set_fmt = wm8711_set_dai_fmt,
+};
+
+struct snd_soc_dai wm8711_dai = {
+	.name = "WM8711",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 1,
+		.channels_max = 2,
+		.rates = WM8711_RATES,
+		.formats = WM8711_FORMATS,
+	},
+	.ops = &wm8711_ops,
+};
+EXPORT_SYMBOL_GPL(wm8711_dai);
+
+static int wm8711_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	snd_soc_write(codec, WM8711_ACTIVE, 0x0);
+	wm8711_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int wm8711_resume(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+	int i;
+	u8 data[2];
+	u16 *cache = codec->reg_cache;
+
+	/* Sync reg_cache with the hardware */
+	for (i = 0; i < ARRAY_SIZE(wm8711_reg); i++) {
+		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
+		data[1] = cache[i] & 0x00ff;
+		codec->hw_write(codec->control_data, data, 2);
+	}
+	wm8711_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+	wm8711_set_bias_level(codec, codec->suspend_bias_level);
+	return 0;
+}
+
+static int wm8711_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	if (wm8711_codec == NULL) {
+		dev_err(&pdev->dev, "Codec device not registered\n");
+		return -ENODEV;
+	}
+
+	socdev->card->codec = wm8711_codec;
+	codec = wm8711_codec;
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		dev_err(codec->dev, "failed to create pcms: %d\n", ret);
+		goto pcm_err;
+	}
+
+	snd_soc_add_controls(codec, wm8711_snd_controls,
+			     ARRAY_SIZE(wm8711_snd_controls));
+	wm8711_add_widgets(codec);
+
+	return ret;
+
+pcm_err:
+	return ret;
+}
+
+/* power down chip */
+static int wm8711_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
+
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8711 = {
+	.probe = 	wm8711_probe,
+	.remove = 	wm8711_remove,
+	.suspend = 	wm8711_suspend,
+	.resume =	wm8711_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8711);
+
+static int wm8711_register(struct wm8711_priv *wm8711,
+			   enum snd_soc_control_type control)
+{
+	int ret;
+	struct snd_soc_codec *codec = &wm8711->codec;
+	u16 reg;
+
+	if (wm8711_codec) {
+		dev_err(codec->dev, "Another WM8711 is registered\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&codec->mutex);
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	codec->private_data = wm8711;
+	codec->name = "WM8711";
+	codec->owner = THIS_MODULE;
+	codec->bias_level = SND_SOC_BIAS_OFF;
+	codec->set_bias_level = wm8711_set_bias_level;
+	codec->dai = &wm8711_dai;
+	codec->num_dai = 1;
+	codec->reg_cache_size = WM8711_CACHEREGNUM;
+	codec->reg_cache = &wm8711->reg_cache;
+
+	memcpy(codec->reg_cache, wm8711_reg, sizeof(wm8711_reg));
+
+	ret = snd_soc_codec_set_cache_io(codec, 7, 9, control);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		goto err;
+	}
+
+	ret = wm8711_reset(codec);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to issue reset\n");
+		goto err;
+	}
+
+	wm8711_dai.dev = codec->dev;
+
+	wm8711_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+	/* Latch the update bits */
+	reg = snd_soc_read(codec, WM8711_LOUT1V);
+	snd_soc_write(codec, WM8711_LOUT1V, reg | 0x0100);
+	reg = snd_soc_read(codec, WM8711_ROUT1V);
+	snd_soc_write(codec, WM8711_ROUT1V, reg | 0x0100);
+
+	wm8711_codec = codec;
+
+	ret = snd_soc_register_codec(codec);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
+		goto err;
+	}
+
+	ret = snd_soc_register_dai(&wm8711_dai);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to register DAI: %d\n", ret);
+		goto err_codec;
+	}
+
+	return 0;
+
+err_codec:
+	snd_soc_unregister_codec(codec);
+err:
+	kfree(wm8711);
+	return ret;
+}
+
+static void wm8711_unregister(struct wm8711_priv *wm8711)
+{
+	wm8711_set_bias_level(&wm8711->codec, SND_SOC_BIAS_OFF);
+	snd_soc_unregister_dai(&wm8711_dai);
+	snd_soc_unregister_codec(&wm8711->codec);
+	kfree(wm8711);
+	wm8711_codec = NULL;
+}
+
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8711_spi_probe(struct spi_device *spi)
+{
+	struct snd_soc_codec *codec;
+	struct wm8711_priv *wm8711;
+
+	wm8711 = kzalloc(sizeof(struct wm8711_priv), GFP_KERNEL);
+	if (wm8711 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8711->codec;
+	codec->control_data = spi;
+	codec->dev = &spi->dev;
+
+	dev_set_drvdata(&spi->dev, wm8711);
+
+	return wm8711_register(wm8711, SND_SOC_SPI);
+}
+
+static int __devexit wm8711_spi_remove(struct spi_device *spi)
+{
+	struct wm8711_priv *wm8711 = dev_get_drvdata(&spi->dev);
+
+	wm8711_unregister(wm8711);
+
+	return 0;
+}
+
+static struct spi_driver wm8711_spi_driver = {
+	.driver = {
+		.name	= "wm8711",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm8711_spi_probe,
+	.remove		= __devexit_p(wm8711_spi_remove),
+};
+#endif /* CONFIG_SPI_MASTER */
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8711_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8711_priv *wm8711;
+	struct snd_soc_codec *codec;
+
+	wm8711 = kzalloc(sizeof(struct wm8711_priv), GFP_KERNEL);
+	if (wm8711 == NULL)
+		return -ENOMEM;
+
+	codec = &wm8711->codec;
+	codec->hw_write = (hw_write_t)i2c_master_send;
+
+	i2c_set_clientdata(i2c, wm8711);
+	codec->control_data = i2c;
+
+	codec->dev = &i2c->dev;
+
+	return wm8711_register(wm8711, SND_SOC_I2C);
+}
+
+static __devexit int wm8711_i2c_remove(struct i2c_client *client)
+{
+	struct wm8711_priv *wm8711 = i2c_get_clientdata(client);
+	wm8711_unregister(wm8711);
+	return 0;
+}
+
+static const struct i2c_device_id wm8711_i2c_id[] = {
+	{ "wm8711", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wm8711_i2c_id);
+
+static struct i2c_driver wm8711_i2c_driver = {
+	.driver = {
+		.name = "WM8711 I2C Codec",
+		.owner = THIS_MODULE,
+	},
+	.probe =    wm8711_i2c_probe,
+	.remove =   __devexit_p(wm8711_i2c_remove),
+	.id_table = wm8711_i2c_id,
+};
+#endif
+
+static int __init wm8711_modinit(void)
+{
+	int ret;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8711_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8711 I2C driver: %d\n",
+		       ret);
+	}
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	ret = spi_register_driver(&wm8711_spi_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register WM8711 SPI driver: %d\n",
+		       ret);
+	}
+#endif
+	return 0;
+}
+module_init(wm8711_modinit);
+
+static void __exit wm8711_exit(void)
+{
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	i2c_del_driver(&wm8711_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+	spi_unregister_driver(&wm8711_spi_driver);
+#endif
+}
+module_exit(wm8711_exit);
+
+MODULE_DESCRIPTION("ASoC WM8711 driver");
+MODULE_AUTHOR("Mike Arthur");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8711.h b/sound/soc/codecs/wm8711.h
new file mode 100644
index 0000000..381e84a
--- /dev/null
+++ b/sound/soc/codecs/wm8711.h
@@ -0,0 +1,42 @@
+/*
+ * wm8711.h  --  WM8711 Soc Audio driver
+ *
+ * Copyright 2006 Wolfson Microelectronics
+ *
+ * Author: Mike Arthur <linux@wolfsonmicro.com>
+ *
+ * Based on wm8731.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8711_H
+#define _WM8711_H
+
+/* WM8711 register space */
+
+#define WM8711_LOUT1V   0x02
+#define WM8711_ROUT1V   0x03
+#define WM8711_APANA    0x04
+#define WM8711_APDIGI   0x05
+#define WM8711_PWR      0x06
+#define WM8711_IFACE    0x07
+#define WM8711_SRATE    0x08
+#define WM8711_ACTIVE   0x09
+#define WM8711_RESET	0x0f
+
+#define WM8711_CACHEREGNUM 	8
+
+#define WM8711_SYSCLK	0
+#define WM8711_DAI		0
+
+struct wm8711_setup_data {
+	unsigned short i2c_address;
+};
+
+extern struct snd_soc_dai wm8711_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8711;
+
+#endif
diff --git a/sound/soc/codecs/wm8727.c b/sound/soc/codecs/wm8727.c
new file mode 100644
index 0000000..d8ffbd6
--- /dev/null
+++ b/sound/soc/codecs/wm8727.c
@@ -0,0 +1,135 @@
+/*
+ * wm8727.c
+ *
+ *  Created on: 15-Oct-2009
+ *      Author: neil.jones@imgtec.com
+ *
+ * Copyright (C) 2009 Imagination Technologies Ltd.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/ac97_codec.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "wm8727.h"
+/*
+ * Note this is a simple chip with no configuration interface, sample rate is
+ * determined automatically by examining the Master clock and Bit clock ratios
+ */
+#define WM8727_RATES  (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
+			SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |\
+			SNDRV_PCM_RATE_192000)
+
+
+struct snd_soc_dai wm8727_dai = {
+	.name = "WM8727",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = WM8727_RATES,
+		.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+		},
+};
+EXPORT_SYMBOL_GPL(wm8727_dai);
+
+static int wm8727_soc_probe(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec;
+	int ret = 0;
+
+	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+	if (codec == NULL)
+		return -ENOMEM;
+	mutex_init(&codec->mutex);
+	codec->name = "WM8727";
+	codec->owner = THIS_MODULE;
+	codec->dai = &wm8727_dai;
+	codec->num_dai = 1;
+	socdev->card->codec = codec;
+	INIT_LIST_HEAD(&codec->dapm_widgets);
+	INIT_LIST_HEAD(&codec->dapm_paths);
+
+	/* register pcms */
+	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+	if (ret < 0) {
+		printk(KERN_ERR "wm8727: failed to create pcms\n");
+		goto pcm_err;
+	}
+
+	return ret;
+
+pcm_err:
+	kfree(socdev->card->codec);
+	socdev->card->codec = NULL;
+	return ret;
+}
+
+static int wm8727_soc_remove(struct platform_device *pdev)
+{
+	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+	struct snd_soc_codec *codec = socdev->card->codec;
+
+	if (codec == NULL)
+		return 0;
+	snd_soc_free_pcms(socdev);
+	kfree(codec);
+	return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8727 = {
+	.probe = 	wm8727_soc_probe,
+	.remove = 	wm8727_soc_remove,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8727);
+
+
+static __devinit int wm8727_platform_probe(struct platform_device *pdev)
+{
+	wm8727_dai.dev = &pdev->dev;
+	return snd_soc_register_dai(&wm8727_dai);
+}
+
+static int __devexit wm8727_platform_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_dai(&wm8727_dai);
+	return 0;
+}
+
+static struct platform_driver wm8727_codec_driver = {
+	.driver = {
+			.name = "wm8727-codec",
+			.owner = THIS_MODULE,
+	},
+
+	.probe = wm8727_platform_probe,
+	.remove = __devexit_p(wm8727_platform_remove),
+};
+
+static int __init wm8727_init(void)
+{
+	return platform_driver_register(&wm8727_codec_driver);
+}
+module_init(wm8727_init);
+
+static void __exit wm8727_exit(void)
+{
+	platform_driver_unregister(&wm8727_codec_driver);
+}
+module_exit(wm8727_exit);
+
+MODULE_DESCRIPTION("ASoC wm8727 driver");
+MODULE_AUTHOR("Neil Jones");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm8727.h b/sound/soc/codecs/wm8727.h
new file mode 100644
index 0000000..ee19aa7
--- /dev/null
+++ b/sound/soc/codecs/wm8727.h
@@ -0,0 +1,21 @@
+/*
+ * wm8727.h
+ *
+ *  Created on: 15-Oct-2009
+ *      Author: neil.jones@imgtec.com
+ *
+ * Copyright (C) 2009 Imagination Technologies Ltd.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef WM8727_H_
+#define WM8727_H_
+
+extern struct snd_soc_dai wm8727_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8727;
+
+#endif /* WM8727_H_ */
diff --git a/sound/soc/codecs/wm8728.c b/sound/soc/codecs/wm8728.c
index 16e969a..3fb653b 100644
--- a/sound/soc/codecs/wm8728.c
+++ b/sound/soc/codecs/wm8728.c
@@ -74,8 +74,6 @@
 
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
-
 	return 0;
 }
 
@@ -287,17 +285,9 @@
 	snd_soc_add_controls(codec, wm8728_snd_controls,
 				ARRAY_SIZE(wm8728_snd_controls));
 	wm8728_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8728: failed to register card\n");
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index d3fd4f2..3a49781 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -19,6 +19,7 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -33,9 +34,18 @@
 static struct snd_soc_codec *wm8731_codec;
 struct snd_soc_codec_device soc_codec_dev_wm8731;
 
+#define WM8731_NUM_SUPPLIES 4
+static const char *wm8731_supply_names[WM8731_NUM_SUPPLIES] = {
+	"AVDD",
+	"HPVDD",
+	"DCVDD",
+	"DBVDD",
+};
+
 /* codec private data */
 struct wm8731_priv {
 	struct snd_soc_codec codec;
+	struct regulator_bulk_data supplies[WM8731_NUM_SUPPLIES];
 	u16 reg_cache[WM8731_CACHEREGNUM];
 	unsigned int sysclk;
 };
@@ -149,7 +159,6 @@
 
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -422,9 +431,12 @@
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
+	struct wm8731_priv *wm8731 = codec->private_data;
 
 	snd_soc_write(codec, WM8731_ACTIVE, 0x0);
 	wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies),
+			       wm8731->supplies);
 	return 0;
 }
 
@@ -432,10 +444,16 @@
 {
 	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	struct snd_soc_codec *codec = socdev->card->codec;
-	int i;
+	struct wm8731_priv *wm8731 = codec->private_data;
+	int i, ret;
 	u8 data[2];
 	u16 *cache = codec->reg_cache;
 
+	ret = regulator_bulk_enable(ARRAY_SIZE(wm8731->supplies),
+				    wm8731->supplies);
+	if (ret != 0)
+		return ret;
+
 	/* Sync reg_cache with the hardware */
 	for (i = 0; i < ARRAY_SIZE(wm8731_reg); i++) {
 		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
@@ -444,6 +462,7 @@
 	}
 	wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 	wm8731_set_bias_level(codec, codec->suspend_bias_level);
+
 	return 0;
 }
 #else
@@ -475,17 +494,9 @@
 	snd_soc_add_controls(codec, wm8731_snd_controls,
 			     ARRAY_SIZE(wm8731_snd_controls));
 	wm8731_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -512,7 +523,7 @@
 static int wm8731_register(struct wm8731_priv *wm8731,
 			   enum snd_soc_control_type control)
 {
-	int ret;
+	int ret, i;
 	struct snd_soc_codec *codec = &wm8731->codec;
 
 	if (wm8731_codec) {
@@ -543,10 +554,27 @@
 		goto err;
 	}
 
+	for (i = 0; i < ARRAY_SIZE(wm8731->supplies); i++)
+		wm8731->supplies[i].supply = wm8731_supply_names[i];
+
+	ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8731->supplies),
+				 wm8731->supplies);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
+		goto err;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(wm8731->supplies),
+				    wm8731->supplies);
+	if (ret != 0) {
+		dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
+		goto err_regulator_get;
+	}
+
 	ret = wm8731_reset(codec);
 	if (ret < 0) {
 		dev_err(codec->dev, "Failed to issue reset: %d\n", ret);
-		goto err;
+		goto err_regulator_enable;
 	}
 
 	wm8731_dai.dev = codec->dev;
@@ -567,7 +595,7 @@
 	ret = snd_soc_register_codec(codec);
 	if (ret != 0) {
 		dev_err(codec->dev, "Failed to register codec: %d\n", ret);
-		goto err;
+		goto err_regulator_enable;
 	}
 
 	ret = snd_soc_register_dai(&wm8731_dai);
@@ -581,6 +609,10 @@
 
 err_codec:
 	snd_soc_unregister_codec(codec);
+err_regulator_enable:
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+err_regulator_get:
+	regulator_bulk_free(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
 err:
 	kfree(wm8731);
 	return ret;
@@ -591,6 +623,8 @@
 	wm8731_set_bias_level(&wm8731->codec, SND_SOC_BIAS_OFF);
 	snd_soc_unregister_dai(&wm8731_dai);
 	snd_soc_unregister_codec(&wm8731->codec);
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+	regulator_bulk_free(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
 	kfree(wm8731);
 	wm8731_codec = NULL;
 }
@@ -623,21 +657,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8731_spi_suspend(struct spi_device *spi, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&spi->dev);
-}
-
-static int wm8731_spi_resume(struct spi_device *spi)
-{
-	return snd_soc_resume_device(&spi->dev);
-}
-#else
-#define wm8731_spi_suspend NULL
-#define wm8731_spi_resume NULL
-#endif
-
 static struct spi_driver wm8731_spi_driver = {
 	.driver = {
 		.name	= "wm8731",
@@ -645,8 +664,6 @@
 		.owner	= THIS_MODULE,
 	},
 	.probe		= wm8731_spi_probe,
-	.suspend	= wm8731_spi_suspend,
-	.resume		= wm8731_spi_resume,
 	.remove		= __devexit_p(wm8731_spi_remove),
 };
 #endif /* CONFIG_SPI_MASTER */
@@ -679,21 +696,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8731_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&i2c->dev);
-}
-
-static int wm8731_i2c_resume(struct i2c_client *i2c)
-{
-	return snd_soc_resume_device(&i2c->dev);
-}
-#else
-#define wm8731_i2c_suspend NULL
-#define wm8731_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8731_i2c_id[] = {
 	{ "wm8731", 0 },
 	{ }
@@ -707,8 +709,6 @@
 	},
 	.probe =    wm8731_i2c_probe,
 	.remove =   __devexit_p(wm8731_i2c_remove),
-	.suspend =  wm8731_i2c_suspend,
-	.resume =   wm8731_i2c_resume,
 	.id_table = wm8731_i2c_id,
 };
 #endif
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index 4ba1e7e..475c67a 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -403,7 +403,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -772,16 +771,8 @@
 	snd_soc_add_controls(codec, wm8750_snd_controls,
 				ARRAY_SIZE(wm8750_snd_controls));
 	wm8750_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8750: failed to register card\n");
-		goto card_err;
-	}
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 5ad677c..d6850dacd 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -673,7 +673,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -724,8 +723,8 @@
 	pll_div->k = K;
 }
 
-static int wm8753_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8753_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	u16 reg, enable;
 	int offset;
@@ -1583,18 +1582,9 @@
 	snd_soc_add_controls(codec, wm8753_snd_controls,
 			     ARRAY_SIZE(wm8753_snd_controls));
 	wm8753_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8753: failed to register card\n");
-		goto card_err;
-	}
 
 	return 0;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-
 pcm_err:
 	return ret;
 }
@@ -1767,21 +1757,6 @@
         return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8753_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8753_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8753_i2c_suspend NULL
-#define wm8753_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8753_i2c_id[] = {
 	{ "wm8753", 0 },
 	{ }
@@ -1795,8 +1770,6 @@
 	},
 	.probe =    wm8753_i2c_probe,
 	.remove =   wm8753_i2c_remove,
-	.suspend =  wm8753_i2c_suspend,
-	.resume =   wm8753_i2c_resume,
 	.id_table = wm8753_i2c_id,
 };
 #endif
@@ -1852,22 +1825,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8753_spi_suspend(struct spi_device *spi, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&spi->dev);
-}
-
-static int wm8753_spi_resume(struct spi_device *spi)
-{
-	return snd_soc_resume_device(&spi->dev);
-}
-
-#else
-#define wm8753_spi_suspend NULL
-#define wm8753_spi_resume NULL
-#endif
-
 static struct spi_driver wm8753_spi_driver = {
 	.driver = {
 		.name	= "wm8753",
@@ -1876,8 +1833,6 @@
 	},
 	.probe		= wm8753_spi_probe,
 	.remove		= __devexit_p(wm8753_spi_remove),
-	.suspend	= wm8753_spi_suspend,
-	.resume		= wm8753_spi_resume,
 };
 #endif
 
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index a9829aa..ab2c0da 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -447,17 +447,8 @@
 				  ARRAY_SIZE(wm8776_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, routes, ARRAY_SIZE(routes));
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
-
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -616,21 +607,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8776_spi_suspend(struct spi_device *spi, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&spi->dev);
-}
-
-static int wm8776_spi_resume(struct spi_device *spi)
-{
-	return snd_soc_resume_device(&spi->dev);
-}
-#else
-#define wm8776_spi_suspend NULL
-#define wm8776_spi_resume NULL
-#endif
-
 static struct spi_driver wm8776_spi_driver = {
 	.driver = {
 		.name	= "wm8776",
@@ -638,8 +614,6 @@
 		.owner	= THIS_MODULE,
 	},
 	.probe		= wm8776_spi_probe,
-	.suspend	= wm8776_spi_suspend,
-	.resume		= wm8776_spi_resume,
 	.remove		= __devexit_p(wm8776_spi_remove),
 };
 #endif /* CONFIG_SPI_MASTER */
@@ -673,21 +647,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8776_i2c_suspend(struct i2c_client *i2c, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&i2c->dev);
-}
-
-static int wm8776_i2c_resume(struct i2c_client *i2c)
-{
-	return snd_soc_resume_device(&i2c->dev);
-}
-#else
-#define wm8776_i2c_suspend NULL
-#define wm8776_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8776_i2c_id[] = {
 	{ "wm8776", 0 },
 	{ }
@@ -701,8 +660,6 @@
 	},
 	.probe =    wm8776_i2c_probe,
 	.remove =   __devexit_p(wm8776_i2c_remove),
-	.suspend =  wm8776_i2c_suspend,
-	.resume =   wm8776_i2c_resume,
 	.id_table = wm8776_i2c_id,
 };
 #endif
diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c
index 5e9c855..c9438dd 100644
--- a/sound/soc/codecs/wm8900.c
+++ b/sound/soc/codecs/wm8900.c
@@ -618,8 +618,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
-
 	return 0;
 }
 
@@ -814,8 +812,8 @@
 	return 0;
 }
 
-static int wm8900_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8900_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	return wm8900_set_fll(codec_dai->codec, pll_id, freq_in, freq_out);
 }
@@ -1312,21 +1310,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8900_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8900_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8900_i2c_suspend NULL
-#define wm8900_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8900_i2c_id[] = {
 	{ "wm8900", 0 },
 	{ }
@@ -1340,8 +1323,6 @@
 	},
 	.probe = wm8900_i2c_probe,
 	.remove = __devexit_p(wm8900_i2c_remove),
-	.suspend = wm8900_i2c_suspend,
-	.resume = wm8900_i2c_resume,
 	.id_table = wm8900_i2c_id,
 };
 
@@ -1370,17 +1351,6 @@
 				ARRAY_SIZE(wm8900_snd_controls));
 	wm8900_add_widgets(codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to register card\n");
-		goto card_err;
-	}
-
-	return ret;
-
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index fe1307b..b8cae17 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -919,8 +919,6 @@
 
 	snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
 
-	snd_soc_dapm_new_widgets(codec);
-
 	return 0;
 }
 
@@ -1655,21 +1653,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8903_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8903_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8903_i2c_suspend NULL
-#define wm8903_i2c_resume NULL
-#endif
-
 /* i2c codec control layer */
 static const struct i2c_device_id wm8903_i2c_id[] = {
        { "wm8903", 0 },
@@ -1684,8 +1667,6 @@
 	},
 	.probe    = wm8903_i2c_probe,
 	.remove   = __devexit_p(wm8903_i2c_remove),
-	.suspend  = wm8903_i2c_suspend,
-	.resume   = wm8903_i2c_resume,
 	.id_table = wm8903_i2c_id,
 };
 
@@ -1712,17 +1693,8 @@
 				ARRAY_SIZE(wm8903_snd_controls));
 	wm8903_add_widgets(socdev->card->codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "wm8903: failed to register card\n");
-		goto card_err;
-	}
-
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 err:
 	return ret;
 }
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 1ef2454..3d850b9 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -298,7 +298,6 @@
 	ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 	if (ret)
 		goto error_ret;
-	ret = snd_soc_dapm_new_widgets(codec);
 
 error_ret:
 	return ret;
@@ -536,8 +535,8 @@
 }
 
 /* Untested at the moment */
-static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8940_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	u16 reg;
@@ -731,12 +730,6 @@
 	if (ret)
 		goto error_free_pcms;
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto error_free_pcms;
-	}
-
 	return ret;
 
 error_free_pcms:
@@ -877,21 +870,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8940_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8940_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8940_i2c_suspend NULL
-#define wm8940_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8940_i2c_id[] = {
 	{ "wm8940", 0 },
 	{ }
@@ -905,8 +883,6 @@
 	},
 	.probe = wm8940_i2c_probe,
 	.remove = __devexit_p(wm8940_i2c_remove),
-	.suspend = wm8940_i2c_suspend,
-	.resume = wm8940_i2c_resume,
 	.id_table = wm8940_i2c_id,
 };
 
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index f59703b..d07bcc1 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -307,7 +307,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -540,8 +539,8 @@
 	return 0;
 }
 
-static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	u16 reg;
@@ -713,17 +712,9 @@
 	snd_soc_add_controls(codec, wm8960_snd_controls,
 			     ARRAY_SIZE(wm8960_snd_controls));
 	wm8960_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -883,21 +874,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8960_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8960_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8960_i2c_suspend NULL
-#define wm8960_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8960_i2c_id[] = {
 	{ "wm8960", 0 },
 	{ }
@@ -911,8 +887,6 @@
 	},
 	.probe =    wm8960_i2c_probe,
 	.remove =   __devexit_p(wm8960_i2c_remove),
-	.suspend =  wm8960_i2c_suspend,
-	.resume =   wm8960_i2c_resume,
 	.id_table = wm8960_i2c_id,
 };
 
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index 5030320..a8007d5 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -986,19 +986,9 @@
 	snd_soc_dapm_new_controls(codec, wm8961_dapm_widgets,
 				  ARRAY_SIZE(wm8961_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
-	snd_soc_dapm_new_widgets(codec);
-
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -1206,21 +1196,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8961_i2c_suspend(struct i2c_client *client, pm_message_t state)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8961_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8961_i2c_suspend NULL
-#define wm8961_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8961_i2c_id[] = {
 	{ "wm8961", 0 },
 	{ }
@@ -1234,8 +1209,6 @@
 	},
 	.probe =    wm8961_i2c_probe,
 	.remove =   __devexit_p(wm8961_i2c_remove),
-	.suspend =  wm8961_i2c_suspend,
-	.resume =   wm8961_i2c_resume,
 	.id_table = wm8961_i2c_id,
 };
 
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index d66efb0..d9540d5 100644
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -338,8 +338,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
-
 	return 0;
 }
 
@@ -703,16 +701,9 @@
 	snd_soc_add_controls(codec, wm8971_snd_controls,
 				ARRAY_SIZE(wm8971_snd_controls));
 	wm8971_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8971: failed to register card\n");
-		goto card_err;
-	}
+
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index 98d663a..81c57b5 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -276,41 +276,42 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
 struct pll_ {
-	unsigned int pre_div:4; /* prescale - 1 */
+	unsigned int pre_div:1;
 	unsigned int n:4;
 	unsigned int k;
 };
 
-static struct pll_ pll_div;
-
 /* The size in bits of the pll divide multiplied by 10
  * to allow rounding later */
 #define FIXED_PLL_SIZE ((1 << 24) * 10)
 
-static void pll_factors(unsigned int target, unsigned int source)
+static void pll_factors(struct pll_ *pll_div,
+			unsigned int target, unsigned int source)
 {
 	unsigned long long Kpart;
 	unsigned int K, Ndiv, Nmod;
 
+	/* There is a fixed divide by 4 in the output path */
+	target *= 4;
+
 	Ndiv = target / source;
 	if (Ndiv < 6) {
-		source >>= 1;
-		pll_div.pre_div = 1;
+		source /= 2;
+		pll_div->pre_div = 1;
 		Ndiv = target / source;
 	} else
-		pll_div.pre_div = 0;
+		pll_div->pre_div = 0;
 
 	if ((Ndiv < 6) || (Ndiv > 12))
 		printk(KERN_WARNING
 			"WM8974 N value %u outwith recommended range!\n",
 			Ndiv);
 
-	pll_div.n = Ndiv;
+	pll_div->n = Ndiv;
 	Nmod = target % source;
 	Kpart = FIXED_PLL_SIZE * (long long)Nmod;
 
@@ -325,13 +326,14 @@
 	/* Move down to proper range now rounding is done */
 	K /= 10;
 
-	pll_div.k = K;
+	pll_div->k = K;
 }
 
-static int wm8974_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8974_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct pll_ pll_div;
 	u16 reg;
 
 	if (freq_in == 0 || freq_out == 0) {
@@ -345,7 +347,7 @@
 		return 0;
 	}
 
-	pll_factors(freq_out*4, freq_in);
+	pll_factors(&pll_div, freq_out, freq_in);
 
 	snd_soc_write(codec, WM8974_PLLN, (pll_div.pre_div << 4) | pll_div.n);
 	snd_soc_write(codec, WM8974_PLLK1, pll_div.k >> 18);
@@ -638,17 +640,9 @@
 	snd_soc_add_controls(codec, wm8974_snd_controls,
 			     ARRAY_SIZE(wm8974_snd_controls));
 	wm8974_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c
index 3f530f8..2862e4d 100644
--- a/sound/soc/codecs/wm8988.c
+++ b/sound/soc/codecs/wm8988.c
@@ -790,19 +790,9 @@
 	snd_soc_dapm_new_controls(codec, wm8988_dapm_widgets,
 				  ARRAY_SIZE(wm8988_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
-	snd_soc_dapm_new_widgets(codec);
-
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -944,21 +934,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8988_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm8988_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm8988_i2c_suspend NULL
-#define wm8988_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8988_i2c_id[] = {
 	{ "wm8988", 0 },
 	{ }
@@ -972,8 +947,6 @@
 	},
 	.probe = wm8988_i2c_probe,
 	.remove = wm8988_i2c_remove,
-	.suspend = wm8988_i2c_suspend,
-	.resume = wm8988_i2c_resume,
 	.id_table = wm8988_i2c_id,
 };
 #endif
@@ -1006,21 +979,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8988_spi_suspend(struct spi_device *spi, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&spi->dev);
-}
-
-static int wm8988_spi_resume(struct spi_device *spi)
-{
-	return snd_soc_resume_device(&spi->dev);
-}
-#else
-#define wm8988_spi_suspend NULL
-#define wm8988_spi_resume NULL
-#endif
-
 static struct spi_driver wm8988_spi_driver = {
 	.driver = {
 		.name	= "wm8988",
@@ -1029,8 +987,6 @@
 	},
 	.probe		= wm8988_spi_probe,
 	.remove		= __devexit_p(wm8988_spi_remove),
-	.suspend	= wm8988_spi_suspend,
-	.resume		= wm8988_spi_resume,
 };
 #endif
 
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index 2d702db..341481e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -920,7 +920,6 @@
 	/* set up the WM8990 audio map */
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -972,8 +971,8 @@
 	pll_div->k = K;
 }
 
-static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	u16 reg;
 	struct snd_soc_codec *codec = codec_dai->codec;
@@ -1409,16 +1408,9 @@
 	snd_soc_add_controls(codec, wm8990_snd_controls,
 				ARRAY_SIZE(wm8990_snd_controls));
 	wm8990_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm8990: failed to register card\n");
-		goto card_err;
-	}
+
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	kfree(codec->reg_cache);
 	return ret;
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index d998799..5e32f2e 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -422,7 +422,7 @@
 	return 0;
 }
 
-static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id,
+static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
 			  unsigned int Fref, unsigned int Fout)
 {
 	struct snd_soc_codec *codec = dai->codec;
@@ -1464,19 +1464,8 @@
 	wm_hubs_add_analogue_routes(codec, wm8993->pdata.lineout1_diff,
 				    wm8993->pdata.lineout2_diff);
 
-	snd_soc_dapm_new_widgets(codec);
-
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card\n");
-		goto card_err;
-	}
-
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 err:
 	return ret;
 }
@@ -1572,33 +1561,15 @@
 	/* Use automatic clock configuration */
 	snd_soc_update_bits(codec, WM8993_CLOCKING_4, WM8993_SR_MODE, 0);
 
-	if (!wm8993->pdata.lineout1_diff)
-		snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
-				    WM8993_LINEOUT1_MODE,
-				    WM8993_LINEOUT1_MODE);
-	if (!wm8993->pdata.lineout2_diff)
-		snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
-				    WM8993_LINEOUT2_MODE,
-				    WM8993_LINEOUT2_MODE);
-
-	if (wm8993->pdata.lineout1fb)
-		snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
-				    WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
-
-	if (wm8993->pdata.lineout2fb)
-		snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
-				    WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
-
-	/* Apply the microphone bias/detection configuration - the
-	 * platform data is directly applicable to the register. */
-	snd_soc_update_bits(codec, WM8993_MICBIAS,
-			    WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
-			    WM8993_MICB1_LVL | WM8993_MICB2_LVL,
-			    wm8993->pdata.jd_scthr << WM8993_JD_SCTHR_SHIFT |
-			    wm8993->pdata.jd_thr << WM8993_JD_THR_SHIFT |
-			    wm8993->pdata.micbias1_lvl |
-			    wm8993->pdata.micbias1_lvl << 1);
-
+	wm_hubs_handle_analogue_pdata(codec, wm8993->pdata.lineout1_diff,
+				      wm8993->pdata.lineout2_diff,
+				      wm8993->pdata.lineout1fb,
+				      wm8993->pdata.lineout2fb,
+				      wm8993->pdata.jd_scthr,
+				      wm8993->pdata.jd_thr,
+				      wm8993->pdata.micbias1_lvl,
+				      wm8993->pdata.micbias2_lvl);
+			     
 	ret = wm8993_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 	if (ret != 0)
 		goto err;
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index 686e5aa..c468497 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -1262,19 +1262,9 @@
 	snd_soc_dapm_new_controls(codec, wm9081_dapm_widgets,
 				  ARRAY_SIZE(wm9081_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths));
-	snd_soc_dapm_new_widgets(codec);
-
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		dev_err(codec->dev, "failed to register card: %d\n", ret);
-		goto card_err;
-	}
 
 	return ret;
 
-card_err:
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
 pcm_err:
 	return ret;
 }
@@ -1452,21 +1442,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm9081_i2c_suspend(struct i2c_client *client, pm_message_t msg)
-{
-	return snd_soc_suspend_device(&client->dev);
-}
-
-static int wm9081_i2c_resume(struct i2c_client *client)
-{
-	return snd_soc_resume_device(&client->dev);
-}
-#else
-#define wm9081_i2c_suspend NULL
-#define wm9081_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm9081_i2c_id[] = {
 	{ "wm9081", 0 },
 	{ }
@@ -1480,8 +1455,6 @@
 	},
 	.probe =    wm9081_i2c_probe,
 	.remove =   __devexit_p(wm9081_i2c_remove),
-	.suspend =  wm9081_i2c_suspend,
-	.resume =   wm9081_i2c_resume,
 	.id_table = wm9081_i2c_id,
 };
 
diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c
index e7d2840..ec54c6d 100644
--- a/sound/soc/codecs/wm9705.c
+++ b/sound/soc/codecs/wm9705.c
@@ -205,7 +205,6 @@
 	snd_soc_dapm_new_controls(codec, wm9705_dapm_widgets,
 					ARRAY_SIZE(wm9705_dapm_widgets));
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
-	snd_soc_dapm_new_widgets(codec);
 
 	return 0;
 }
@@ -403,12 +402,6 @@
 				ARRAY_SIZE(wm9705_snd_ac97_controls));
 	wm9705_add_widgets(codec);
 
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm9705: failed to register card\n");
-		goto reset_err;
-	}
-
 	return 0;
 
 reset_err:
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 1fd4e88..0ac1215 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -436,7 +436,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -695,17 +694,11 @@
 	snd_soc_add_controls(codec, wm9712_snd_ac97_controls,
 				ARRAY_SIZE(wm9712_snd_ac97_controls));
 	wm9712_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0) {
-		printk(KERN_ERR "wm9712: failed to register card\n");
-		goto reset_err;
-	}
 
 	return 0;
 
 reset_err:
 	snd_soc_free_pcms(socdev);
-
 pcm_err:
 	snd_soc_free_ac97_codec(codec);
 
diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c
index abed37a..c58aab3 100644
--- a/sound/soc/codecs/wm9713.c
+++ b/sound/soc/codecs/wm9713.c
@@ -165,9 +165,9 @@
 SOC_SINGLE("Mono Playback ZC Switch", AC97_MASTER_TONE, 6, 1, 0),
 SOC_SINGLE("Mono Playback Volume", AC97_MASTER_TONE, 0, 31, 1),
 
-SOC_SINGLE("PC Beep Playback Headphone Volume", AC97_AUX, 12, 7, 1),
-SOC_SINGLE("PC Beep Playback Speaker Volume", AC97_AUX, 8, 7, 1),
-SOC_SINGLE("PC Beep Playback Mono Volume", AC97_AUX, 4, 7, 1),
+SOC_SINGLE("Beep Playback Headphone Volume", AC97_AUX, 12, 7, 1),
+SOC_SINGLE("Beep Playback Speaker Volume", AC97_AUX, 8, 7, 1),
+SOC_SINGLE("Beep Playback Mono Volume", AC97_AUX, 4, 7, 1),
 
 SOC_SINGLE("Voice Playback Headphone Volume", AC97_PCM, 12, 7, 1),
 SOC_SINGLE("Voice Playback Master Volume", AC97_PCM, 8, 7, 1),
@@ -266,7 +266,7 @@
 
 /* Left Headphone Mixers */
 static const struct snd_kcontrol_new wm9713_hpl_mixer_controls[] = {
-SOC_DAPM_SINGLE("PC Beep Playback Switch", HPL_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Beep Playback Switch", HPL_MIXER, 5, 1, 0),
 SOC_DAPM_SINGLE("Voice Playback Switch", HPL_MIXER, 4, 1, 0),
 SOC_DAPM_SINGLE("Aux Playback Switch", HPL_MIXER, 3, 1, 0),
 SOC_DAPM_SINGLE("PCM Playback Switch", HPL_MIXER, 2, 1, 0),
@@ -276,7 +276,7 @@
 
 /* Right Headphone Mixers */
 static const struct snd_kcontrol_new wm9713_hpr_mixer_controls[] = {
-SOC_DAPM_SINGLE("PC Beep Playback Switch", HPR_MIXER, 5, 1, 0),
+SOC_DAPM_SINGLE("Beep Playback Switch", HPR_MIXER, 5, 1, 0),
 SOC_DAPM_SINGLE("Voice Playback Switch", HPR_MIXER, 4, 1, 0),
 SOC_DAPM_SINGLE("Aux Playback Switch", HPR_MIXER, 3, 1, 0),
 SOC_DAPM_SINGLE("PCM Playback Switch", HPR_MIXER, 2, 1, 0),
@@ -294,7 +294,7 @@
 
 /* Speaker Mixer */
 static const struct snd_kcontrol_new wm9713_speaker_mixer_controls[] = {
-SOC_DAPM_SINGLE("PC Beep Playback Switch", AC97_AUX, 11, 1, 1),
+SOC_DAPM_SINGLE("Beep Playback Switch", AC97_AUX, 11, 1, 1),
 SOC_DAPM_SINGLE("Voice Playback Switch", AC97_PCM, 11, 1, 1),
 SOC_DAPM_SINGLE("Aux Playback Switch", AC97_REC_SEL, 11, 1, 1),
 SOC_DAPM_SINGLE("PCM Playback Switch", AC97_PHONE, 14, 1, 1),
@@ -304,7 +304,7 @@
 
 /* Mono Mixer */
 static const struct snd_kcontrol_new wm9713_mono_mixer_controls[] = {
-SOC_DAPM_SINGLE("PC Beep Playback Switch", AC97_AUX, 7, 1, 1),
+SOC_DAPM_SINGLE("Beep Playback Switch", AC97_AUX, 7, 1, 1),
 SOC_DAPM_SINGLE("Voice Playback Switch", AC97_PCM, 7, 1, 1),
 SOC_DAPM_SINGLE("Aux Playback Switch", AC97_REC_SEL, 7, 1, 1),
 SOC_DAPM_SINGLE("PCM Playback Switch", AC97_PHONE, 13, 1, 1),
@@ -463,7 +463,7 @@
 
 static const struct snd_soc_dapm_route audio_map[] = {
 	/* left HP mixer */
-	{"Left HP Mixer", "PC Beep Playback Switch", "PCBEEP"},
+	{"Left HP Mixer", "Beep Playback Switch",    "PCBEEP"},
 	{"Left HP Mixer", "Voice Playback Switch",   "Voice DAC"},
 	{"Left HP Mixer", "Aux Playback Switch",     "Aux DAC"},
 	{"Left HP Mixer", "Bypass Playback Switch",  "Left Line In"},
@@ -472,7 +472,7 @@
 	{"Left HP Mixer", NULL,  "Capture Headphone Mux"},
 
 	/* right HP mixer */
-	{"Right HP Mixer", "PC Beep Playback Switch", "PCBEEP"},
+	{"Right HP Mixer", "Beep Playback Switch",    "PCBEEP"},
 	{"Right HP Mixer", "Voice Playback Switch",   "Voice DAC"},
 	{"Right HP Mixer", "Aux Playback Switch",     "Aux DAC"},
 	{"Right HP Mixer", "Bypass Playback Switch",  "Right Line In"},
@@ -491,7 +491,7 @@
 	{"Capture Mixer", NULL, "Right Capture Source"},
 
 	/* speaker mixer */
-	{"Speaker Mixer", "PC Beep Playback Switch", "PCBEEP"},
+	{"Speaker Mixer", "Beep Playback Switch",    "PCBEEP"},
 	{"Speaker Mixer", "Voice Playback Switch",   "Voice DAC"},
 	{"Speaker Mixer", "Aux Playback Switch",     "Aux DAC"},
 	{"Speaker Mixer", "Bypass Playback Switch",  "Line Mixer"},
@@ -499,7 +499,7 @@
 	{"Speaker Mixer", "MonoIn Playback Switch",  "Mono In"},
 
 	/* mono mixer */
-	{"Mono Mixer", "PC Beep Playback Switch", "PCBEEP"},
+	{"Mono Mixer", "Beep Playback Switch",    "PCBEEP"},
 	{"Mono Mixer", "Voice Playback Switch",   "Voice DAC"},
 	{"Mono Mixer", "Aux Playback Switch",     "Aux DAC"},
 	{"Mono Mixer", "Bypass Playback Switch",  "Line Mixer"},
@@ -625,7 +625,6 @@
 
 	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
 
-	snd_soc_dapm_new_widgets(codec);
 	return 0;
 }
 
@@ -800,8 +799,8 @@
 	return 0;
 }
 
-static int wm9713_set_dai_pll(struct snd_soc_dai *codec_dai,
-		int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int wm9713_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
+		int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
 	return wm9713_set_pll(codec, pll_id, freq_in, freq_out);
@@ -1247,14 +1246,11 @@
 	snd_soc_add_controls(codec, wm9713_snd_ac97_controls,
 				ARRAY_SIZE(wm9713_snd_ac97_controls));
 	wm9713_add_widgets(codec);
-	ret = snd_soc_init_card(socdev);
-	if (ret < 0)
-		goto reset_err;
+
 	return 0;
 
 reset_err:
 	snd_soc_free_pcms(socdev);
-
 pcm_err:
 	snd_soc_free_ac97_codec(codec);
 
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index e542027..d73c305 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -438,11 +438,11 @@
 SND_SOC_DAPM_INPUT("IN1LN"),
 SND_SOC_DAPM_INPUT("IN1LP"),
 SND_SOC_DAPM_INPUT("IN2LN"),
-SND_SOC_DAPM_INPUT("IN2LP/VXRN"),
+SND_SOC_DAPM_INPUT("IN2LP:VXRN"),
 SND_SOC_DAPM_INPUT("IN1RN"),
 SND_SOC_DAPM_INPUT("IN1RP"),
 SND_SOC_DAPM_INPUT("IN2RN"),
-SND_SOC_DAPM_INPUT("IN2RP/VXRP"),
+SND_SOC_DAPM_INPUT("IN2RP:VXRP"),
 
 SND_SOC_DAPM_MICBIAS("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0),
 SND_SOC_DAPM_MICBIAS("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0),
@@ -537,14 +537,14 @@
 	{ "IN1R PGA", "IN1RP Switch", "IN1RP" },
 	{ "IN1R PGA", "IN1RN Switch", "IN1RN" },
 
-	{ "IN2L PGA", "IN2LP Switch", "IN2LP/VXRN" },
+	{ "IN2L PGA", "IN2LP Switch", "IN2LP:VXRN" },
 	{ "IN2L PGA", "IN2LN Switch", "IN2LN" },
 
-	{ "IN2R PGA", "IN2RP Switch", "IN2RP/VXRP" },
+	{ "IN2R PGA", "IN2RP Switch", "IN2RP:VXRP" },
 	{ "IN2R PGA", "IN2RN Switch", "IN2RN" },
 
-	{ "Direct Voice", NULL, "IN2LP/VXRN" },
-	{ "Direct Voice", NULL, "IN2RP/VXRP" },
+	{ "Direct Voice", NULL, "IN2LP:VXRN" },
+	{ "Direct Voice", NULL, "IN2RP:VXRP" },
 
 	{ "MIXINL", "IN1L Switch", "IN1L PGA" },
 	{ "MIXINL", "IN2L Switch", "IN2L PGA" },
@@ -565,7 +565,7 @@
 	{ "Left Output Mixer", "Right Input Switch", "MIXINR" },
 	{ "Left Output Mixer", "IN2RN Switch", "IN2RN" },
 	{ "Left Output Mixer", "IN2LN Switch", "IN2LN" },
-	{ "Left Output Mixer", "IN2LP Switch", "IN2LP/VXRN" },
+	{ "Left Output Mixer", "IN2LP Switch", "IN2LP:VXRN" },
 	{ "Left Output Mixer", "IN1L Switch", "IN1L PGA" },
 	{ "Left Output Mixer", "IN1R Switch", "IN1R PGA" },
 
@@ -573,7 +573,7 @@
 	{ "Right Output Mixer", "Right Input Switch", "MIXINR" },
 	{ "Right Output Mixer", "IN2LN Switch", "IN2LN" },
 	{ "Right Output Mixer", "IN2RN Switch", "IN2RN" },
-	{ "Right Output Mixer", "IN2RP Switch", "IN2RP/VXRP" },
+	{ "Right Output Mixer", "IN2RP Switch", "IN2RP:VXRP" },
 	{ "Right Output Mixer", "IN1L Switch", "IN1L PGA" },
 	{ "Right Output Mixer", "IN1R Switch", "IN1R PGA" },
 
@@ -738,6 +738,41 @@
 }
 EXPORT_SYMBOL_GPL(wm_hubs_add_analogue_routes);
 
+int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *codec,
+				  int lineout1_diff, int lineout2_diff,
+				  int lineout1fb, int lineout2fb,
+				  int jd_scthr, int jd_thr, int micbias1_lvl,
+				  int micbias2_lvl)
+{
+	if (!lineout1_diff)
+		snd_soc_update_bits(codec, WM8993_LINE_MIXER1,
+				    WM8993_LINEOUT1_MODE,
+				    WM8993_LINEOUT1_MODE);
+	if (!lineout2_diff)
+		snd_soc_update_bits(codec, WM8993_LINE_MIXER2,
+				    WM8993_LINEOUT2_MODE,
+				    WM8993_LINEOUT2_MODE);
+
+	if (lineout1fb)
+		snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+				    WM8993_LINEOUT1_FB, WM8993_LINEOUT1_FB);
+
+	if (lineout2fb)
+		snd_soc_update_bits(codec, WM8993_ADDITIONAL_CONTROL,
+				    WM8993_LINEOUT2_FB, WM8993_LINEOUT2_FB);
+
+	snd_soc_update_bits(codec, WM8993_MICBIAS,
+			    WM8993_JD_SCTHR_MASK | WM8993_JD_THR_MASK |
+			    WM8993_MICB1_LVL | WM8993_MICB2_LVL,
+			    jd_scthr << WM8993_JD_SCTHR_SHIFT |
+			    jd_thr << WM8993_JD_THR_SHIFT |
+			    micbias1_lvl |
+			    micbias2_lvl << WM8993_MICB2_LVL_SHIFT);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wm_hubs_handle_analogue_pdata);
+
 MODULE_DESCRIPTION("Shared support for Wolfson hubs products");
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wm_hubs.h b/sound/soc/codecs/wm_hubs.h
index ec09cb6..36d3fba 100644
--- a/sound/soc/codecs/wm_hubs.h
+++ b/sound/soc/codecs/wm_hubs.h
@@ -20,5 +20,10 @@
 
 extern int wm_hubs_add_analogue_controls(struct snd_soc_codec *);
 extern int wm_hubs_add_analogue_routes(struct snd_soc_codec *, int, int);
+extern int wm_hubs_handle_analogue_pdata(struct snd_soc_codec *,
+					 int lineout1_diff, int lineout2_diff,
+					 int lineout1fb, int lineout2fb,
+					 int jd_scthr, int jd_thr,
+					 int micbias1_lvl, int micbias2_lvl);
 
 #endif
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index 4dfd4ad..047ee39 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -13,9 +13,9 @@
 	tristate
 
 config SND_DAVINCI_SOC_EVM
-	tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+	tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
 	depends on SND_DAVINCI_SOC
-	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
+	depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM  || MACH_DAVINCI_DM365_EVM
 	select SND_DAVINCI_SOC_I2S
 	select SND_SOC_TLV320AIC3X
 	help
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 67414f6..7ccbe66 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -45,7 +45,8 @@
 	unsigned sysclk;
 
 	/* ASP1 on DM355 EVM is clocked by an external oscillator */
-	if (machine_is_davinci_dm355_evm() || machine_is_davinci_dm6467_evm())
+	if (machine_is_davinci_dm355_evm() || machine_is_davinci_dm6467_evm() ||
+	    machine_is_davinci_dm365_evm())
 		sysclk = 27000000;
 
 	/* ASP0 in DM6446 EVM is clocked by U55, as configured by
@@ -176,7 +177,7 @@
 	.ops = &evm_ops,
 };
 
-/* davinci-evm audio machine driver */
+/* davinci dm6446, dm355 or dm365 evm audio machine driver */
 static struct snd_soc_card snd_soc_card_evm = {
 	.name = "DaVinci EVM",
 	.platform = &davinci_soc_platform,
@@ -243,7 +244,7 @@
 	int index;
 	int ret;
 
-	if (machine_is_davinci_evm()) {
+	if (machine_is_davinci_evm() || machine_is_davinci_dm365_evm()) {
 		evm_snd_dev_data = &evm_snd_devdata;
 		index = 0;
 	} else if (machine_is_davinci_dm355_evm()) {
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index 4ae7070..6362ca0 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -97,12 +97,24 @@
 	DAVINCI_MCBSP_WORD_32,
 };
 
+static const unsigned char data_type[SNDRV_PCM_FORMAT_S32_LE + 1] = {
+	[SNDRV_PCM_FORMAT_S8]		= 1,
+	[SNDRV_PCM_FORMAT_S16_LE]	= 2,
+	[SNDRV_PCM_FORMAT_S32_LE]	= 4,
+};
+
+static const unsigned char asp_word_length[SNDRV_PCM_FORMAT_S32_LE + 1] = {
+	[SNDRV_PCM_FORMAT_S8]		= DAVINCI_MCBSP_WORD_8,
+	[SNDRV_PCM_FORMAT_S16_LE]	= DAVINCI_MCBSP_WORD_16,
+	[SNDRV_PCM_FORMAT_S32_LE]	= DAVINCI_MCBSP_WORD_32,
+};
+
+static const unsigned char double_fmt[SNDRV_PCM_FORMAT_S32_LE + 1] = {
+	[SNDRV_PCM_FORMAT_S8]		= SNDRV_PCM_FORMAT_S16_LE,
+	[SNDRV_PCM_FORMAT_S16_LE]	= SNDRV_PCM_FORMAT_S32_LE,
+};
+
 struct davinci_mcbsp_dev {
-	/*
-	 * dma_params must be first because rtd->dai->cpu_dai->private_data
-	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
-	 * davinci_pcm_open.
-	 */
 	struct davinci_pcm_dma_params	dma_params[2];
 	void __iomem			*base;
 #define MOD_DSP_A	0
@@ -110,6 +122,27 @@
 	int				mode;
 	u32				pcr;
 	struct clk			*clk;
+	/*
+	 * Combining both channels into 1 element will at least double the
+	 * amount of time between servicing the dma channel, increase
+	 * effiency, and reduce the chance of overrun/underrun. But,
+	 * it will result in the left & right channels being swapped.
+	 *
+	 * If relabeling the left and right channels is not possible,
+	 * you may want to let the codec know to swap them back.
+	 *
+	 * It may allow x10 the amount of time to service dma requests,
+	 * if the codec is master and is using an unnecessarily fast bit clock
+	 * (ie. tlvaic23b), independent of the sample rate. So, having an
+	 * entire frame at once means it can be serviced at the sample rate
+	 * instead of the bit clock rate.
+	 *
+	 * In the now unlikely case that an underrun still
+	 * occurs, both the left and right samples will be repeated
+	 * so that no pops are heard, and the left and right channels
+	 * won't end up being swapped because of the underrun.
+	 */
+	unsigned enable_channel_combine:1;
 };
 
 static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
@@ -349,6 +382,8 @@
 	int mcbsp_word_length;
 	unsigned int rcr, xcr, srgr;
 	u32 spcr;
+	snd_pcm_format_t fmt;
+	unsigned element_cnt = 1;
 
 	/* general line settings */
 	spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
@@ -378,27 +413,24 @@
 		xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
 	}
 	/* Determine xfer data type */
-	switch (params_format(params)) {
-	case SNDRV_PCM_FORMAT_S8:
-		dma_params->data_type = 1;
-		mcbsp_word_length = DAVINCI_MCBSP_WORD_8;
-		break;
-	case SNDRV_PCM_FORMAT_S16_LE:
-		dma_params->data_type = 2;
-		mcbsp_word_length = DAVINCI_MCBSP_WORD_16;
-		break;
-	case SNDRV_PCM_FORMAT_S32_LE:
-		dma_params->data_type = 4;
-		mcbsp_word_length = DAVINCI_MCBSP_WORD_32;
-		break;
-	default:
+	fmt = params_format(params);
+	if ((fmt > SNDRV_PCM_FORMAT_S32_LE) || !data_type[fmt]) {
 		printk(KERN_WARNING "davinci-i2s: unsupported PCM format\n");
 		return -EINVAL;
 	}
 
-	dma_params->acnt  = dma_params->data_type;
-	rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(1);
-	xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(1);
+	if (params_channels(params) == 2) {
+		element_cnt = 2;
+		if (double_fmt[fmt] && dev->enable_channel_combine) {
+			element_cnt = 1;
+			fmt = double_fmt[fmt];
+		}
+	}
+	dma_params->acnt = dma_params->data_type = data_type[fmt];
+	dma_params->fifo_level = 0;
+	mcbsp_word_length = asp_word_length[fmt];
+	rcr |= DAVINCI_MCBSP_RCR_RFRLEN1(element_cnt - 1);
+	xcr |= DAVINCI_MCBSP_XCR_XFRLEN1(element_cnt - 1);
 
 	rcr |= DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
 		DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length);
@@ -513,7 +545,13 @@
 		ret = -ENOMEM;
 		goto err_release_region;
 	}
-
+	if (pdata) {
+		dev->enable_channel_combine = pdata->enable_channel_combine;
+		dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].sram_size =
+			pdata->sram_size_playback;
+		dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].sram_size =
+			pdata->sram_size_capture;
+	}
 	dev->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		ret = -ENODEV;
@@ -547,6 +585,7 @@
 	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
 
 	davinci_i2s_dai.private_data = dev;
+	davinci_i2s_dai.dma_data = dev->dma_params;
 	ret = snd_soc_register_dai(&davinci_i2s_dai);
 	if (ret != 0)
 		goto err_free_mem;
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 5d1f98a..0a302e1 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -714,16 +714,13 @@
 	struct davinci_pcm_dma_params *dma_params =
 					&dev->dma_params[substream->stream];
 	int word_length;
-	u8 numevt;
+	u8 fifo_level;
 
 	davinci_hw_common_param(dev, substream->stream);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		numevt = dev->txnumevt;
+		fifo_level = dev->txnumevt;
 	else
-		numevt = dev->rxnumevt;
-
-	if (!numevt)
-		numevt = 1;
+		fifo_level = dev->rxnumevt;
 
 	if (dev->op_mode == DAVINCI_MCASP_DIT_MODE)
 		davinci_hw_dit_param(dev);
@@ -751,12 +748,12 @@
 		return -EINVAL;
 	}
 
-	if (dev->version == MCASP_VERSION_2) {
-		dma_params->data_type *= numevt;
-		dma_params->acnt = 4 * numevt;
-	} else
+	if (dev->version == MCASP_VERSION_2 && !fifo_level)
+		dma_params->acnt = 4;
+	else
 		dma_params->acnt = dma_params->data_type;
 
+	dma_params->fifo_level = fifo_level;
 	davinci_config_channel_size(dev, word_length);
 
 	return 0;
@@ -907,6 +904,7 @@
 
 	dma_data->channel = res->start;
 	davinci_mcasp_dai[pdata->op_mode].private_data = dev;
+	davinci_mcasp_dai[pdata->op_mode].dma_data = dev->dma_params;
 	davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
 	ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
 
diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h
index 9d179cc..582c924 100644
--- a/sound/soc/davinci/davinci-mcasp.h
+++ b/sound/soc/davinci/davinci-mcasp.h
@@ -39,11 +39,6 @@
 };
 
 struct davinci_audio_dev {
-	/*
-	 * dma_params must be first because rtd->dai->cpu_dai->private_data
-	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
-	 * davinci_pcm_open.
-	 */
 	struct davinci_pcm_dma_params dma_params[2];
 	void __iomem *base;
 	int sample_rate;
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index c73a915..ad4d7f4 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -3,6 +3,7 @@
  *
  * Author:      Vladimir Barinov, <vbarinov@embeddedalley.com>
  * Copyright:   (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ * added SRAM ping/pong (C) 2008 Troy Kisky <troy.kisky@boundarydevices.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -23,10 +24,29 @@
 
 #include <asm/dma.h>
 #include <mach/edma.h>
+#include <mach/sram.h>
 
 #include "davinci-pcm.h"
 
-static struct snd_pcm_hardware davinci_pcm_hardware = {
+#ifdef DEBUG
+static void print_buf_info(int slot, char *name)
+{
+	struct edmacc_param p;
+	if (slot < 0)
+		return;
+	edma_read_slot(slot, &p);
+	printk(KERN_DEBUG "%s: 0x%x, opt=%x, src=%x, a_b_cnt=%x dst=%x\n",
+			name, slot, p.opt, p.src, p.a_b_cnt, p.dst);
+	printk(KERN_DEBUG "    src_dst_bidx=%x link_bcntrld=%x src_dst_cidx=%x ccnt=%x\n",
+			p.src_dst_bidx, p.link_bcntrld, p.src_dst_cidx, p.ccnt);
+}
+#else
+static void print_buf_info(int slot, char *name)
+{
+}
+#endif
+
+static struct snd_pcm_hardware pcm_hardware_playback = {
 	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
 		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
 		 SNDRV_PCM_INFO_PAUSE),
@@ -48,102 +68,432 @@
 	.fifo_size = 0,
 };
 
+static struct snd_pcm_hardware pcm_hardware_capture = {
+	.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		 SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
+		 SNDRV_PCM_INFO_PAUSE),
+	.formats = (SNDRV_PCM_FMTBIT_S16_LE),
+	.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
+		  SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
+		  SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
+		  SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
+		  SNDRV_PCM_RATE_KNOT),
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 2,
+	.channels_max = 2,
+	.buffer_bytes_max = 128 * 1024,
+	.period_bytes_min = 32,
+	.period_bytes_max = 8 * 1024,
+	.periods_min = 16,
+	.periods_max = 255,
+	.fifo_size = 0,
+};
+
+/*
+ * How ping/pong works....
+ *
+ * Playback:
+ * ram_params - copys 2*ping_size from start of SDRAM to iram,
+ * 	links to ram_link2
+ * ram_link2 - copys rest of SDRAM to iram in ping_size units,
+ * 	links to ram_link
+ * ram_link - copys entire SDRAM to iram in ping_size uints,
+ * 	links to self
+ *
+ * asp_params - same as asp_link[0]
+ * asp_link[0] - copys from lower half of iram to asp port
+ * 	links to asp_link[1], triggers iram copy event on completion
+ * asp_link[1] - copys from upper half of iram to asp port
+ * 	links to asp_link[0], triggers iram copy event on completion
+ * 	triggers interrupt only needed to let upper SOC levels update position
+ * 	in stream on completion
+ *
+ * When playback is started:
+ * 	ram_params started
+ * 	asp_params started
+ *
+ * Capture:
+ * ram_params - same as ram_link,
+ * 	links to ram_link
+ * ram_link - same as playback
+ * 	links to self
+ *
+ * asp_params - same as playback
+ * asp_link[0] - same as playback
+ * asp_link[1] - same as playback
+ *
+ * When capture is started:
+ * 	asp_params started
+ */
 struct davinci_runtime_data {
 	spinlock_t lock;
 	int period;		/* current DMA period */
-	int master_lch;		/* Master DMA channel */
-	int slave_lch;		/* linked parameter RAM reload slot */
+	int asp_channel;	/* Master DMA channel */
+	int asp_link[2];	/* asp parameter link channel, ping/pong */
 	struct davinci_pcm_dma_params *params;	/* DMA params */
+	int ram_channel;
+	int ram_link;
+	int ram_link2;
+	struct edmacc_param asp_params;
+	struct edmacc_param ram_params;
 };
 
+/*
+ * Not used with ping/pong
+ */
 static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	int lch = prtd->slave_lch;
+	int link = prtd->asp_link[0];
 	unsigned int period_size;
 	unsigned int dma_offset;
 	dma_addr_t dma_pos;
 	dma_addr_t src, dst;
 	unsigned short src_bidx, dst_bidx;
+	unsigned short src_cidx, dst_cidx;
 	unsigned int data_type;
 	unsigned short acnt;
 	unsigned int count;
+	unsigned int fifo_level;
 
 	period_size = snd_pcm_lib_period_bytes(substream);
 	dma_offset = prtd->period * period_size;
 	dma_pos = runtime->dma_addr + dma_offset;
+	fifo_level = prtd->params->fifo_level;
 
 	pr_debug("davinci_pcm: audio_set_dma_params_play channel = %d "
-		"dma_ptr = %x period_size=%x\n", lch, dma_pos, period_size);
+		"dma_ptr = %x period_size=%x\n", link, dma_pos, period_size);
 
 	data_type = prtd->params->data_type;
 	count = period_size / data_type;
+	if (fifo_level)
+		count /= fifo_level;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		src = dma_pos;
 		dst = prtd->params->dma_addr;
 		src_bidx = data_type;
 		dst_bidx = 0;
+		src_cidx = data_type * fifo_level;
+		dst_cidx = 0;
 	} else {
 		src = prtd->params->dma_addr;
 		dst = dma_pos;
 		src_bidx = 0;
 		dst_bidx = data_type;
+		src_cidx = 0;
+		dst_cidx = data_type * fifo_level;
 	}
 
 	acnt = prtd->params->acnt;
-	edma_set_src(lch, src, INCR, W8BIT);
-	edma_set_dest(lch, dst, INCR, W8BIT);
-	edma_set_src_index(lch, src_bidx, 0);
-	edma_set_dest_index(lch, dst_bidx, 0);
-	edma_set_transfer_params(lch, acnt, count, 1, 0, ASYNC);
+	edma_set_src(link, src, INCR, W8BIT);
+	edma_set_dest(link, dst, INCR, W8BIT);
+
+	edma_set_src_index(link, src_bidx, src_cidx);
+	edma_set_dest_index(link, dst_bidx, dst_cidx);
+
+	if (!fifo_level)
+		edma_set_transfer_params(link, acnt, count, 1, 0, ASYNC);
+	else
+		edma_set_transfer_params(link, acnt, fifo_level, count,
+							fifo_level, ABSYNC);
 
 	prtd->period++;
 	if (unlikely(prtd->period >= runtime->periods))
 		prtd->period = 0;
 }
 
-static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned link, u16 ch_status, void *data)
 {
 	struct snd_pcm_substream *substream = data;
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
 
-	pr_debug("davinci_pcm: lch=%d, status=0x%x\n", lch, ch_status);
+	print_buf_info(prtd->ram_channel, "i ram_channel");
+	pr_debug("davinci_pcm: link=%d, status=0x%x\n", link, ch_status);
 
 	if (unlikely(ch_status != DMA_COMPLETE))
 		return;
 
 	if (snd_pcm_running(substream)) {
+		if (prtd->ram_channel < 0) {
+			/* No ping/pong must fix up link dma data*/
+			spin_lock(&prtd->lock);
+			davinci_pcm_enqueue_dma(substream);
+			spin_unlock(&prtd->lock);
+		}
 		snd_pcm_period_elapsed(substream);
-
-		spin_lock(&prtd->lock);
-		davinci_pcm_enqueue_dma(substream);
-		spin_unlock(&prtd->lock);
 	}
 }
 
+static int allocate_sram(struct snd_pcm_substream *substream, unsigned size,
+		struct snd_pcm_hardware *ppcm)
+{
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	struct snd_dma_buffer *iram_dma = NULL;
+	dma_addr_t iram_phys = 0;
+	void *iram_virt = NULL;
+
+	if (buf->private_data || !size)
+		return 0;
+
+	ppcm->period_bytes_max = size;
+	iram_virt = sram_alloc(size, &iram_phys);
+	if (!iram_virt)
+		goto exit1;
+	iram_dma = kzalloc(sizeof(*iram_dma), GFP_KERNEL);
+	if (!iram_dma)
+		goto exit2;
+	iram_dma->area = iram_virt;
+	iram_dma->addr = iram_phys;
+	memset(iram_dma->area, 0, size);
+	iram_dma->bytes = size;
+	buf->private_data = iram_dma;
+	return 0;
+exit2:
+	if (iram_virt)
+		sram_free(iram_virt, size);
+exit1:
+	return -ENOMEM;
+}
+
+/*
+ * Only used with ping/pong.
+ * This is called after runtime->dma_addr, period_bytes and data_type are valid
+ */
+static int ping_pong_dma_setup(struct snd_pcm_substream *substream)
+{
+	unsigned short ram_src_cidx, ram_dst_cidx;
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct davinci_runtime_data *prtd = runtime->private_data;
+	struct snd_dma_buffer *iram_dma =
+		(struct snd_dma_buffer *)substream->dma_buffer.private_data;
+	struct davinci_pcm_dma_params *params = prtd->params;
+	unsigned int data_type = params->data_type;
+	unsigned int acnt = params->acnt;
+	/* divide by 2 for ping/pong */
+	unsigned int ping_size = snd_pcm_lib_period_bytes(substream) >> 1;
+	int link = prtd->asp_link[1];
+	unsigned int fifo_level = prtd->params->fifo_level;
+	unsigned int count;
+	if ((data_type == 0) || (data_type > 4)) {
+		printk(KERN_ERR "%s: data_type=%i\n", __func__, data_type);
+		return -EINVAL;
+	}
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		dma_addr_t asp_src_pong = iram_dma->addr + ping_size;
+		ram_src_cidx = ping_size;
+		ram_dst_cidx = -ping_size;
+		edma_set_src(link, asp_src_pong, INCR, W8BIT);
+
+		link = prtd->asp_link[0];
+		edma_set_src_index(link, data_type, data_type * fifo_level);
+		link = prtd->asp_link[1];
+		edma_set_src_index(link, data_type, data_type * fifo_level);
+
+		link = prtd->ram_link;
+		edma_set_src(link, runtime->dma_addr, INCR, W32BIT);
+	} else {
+		dma_addr_t asp_dst_pong = iram_dma->addr + ping_size;
+		ram_src_cidx = -ping_size;
+		ram_dst_cidx = ping_size;
+		edma_set_dest(link, asp_dst_pong, INCR, W8BIT);
+
+		link = prtd->asp_link[0];
+		edma_set_dest_index(link, data_type, data_type * fifo_level);
+		link = prtd->asp_link[1];
+		edma_set_dest_index(link, data_type, data_type * fifo_level);
+
+		link = prtd->ram_link;
+		edma_set_dest(link, runtime->dma_addr, INCR, W32BIT);
+	}
+
+	if (!fifo_level) {
+		count = ping_size / data_type;
+		edma_set_transfer_params(prtd->asp_link[0], acnt, count,
+				1, 0, ASYNC);
+		edma_set_transfer_params(prtd->asp_link[1], acnt, count,
+				1, 0, ASYNC);
+	} else {
+		count = ping_size / (data_type * fifo_level);
+		edma_set_transfer_params(prtd->asp_link[0], acnt, fifo_level,
+				count, fifo_level, ABSYNC);
+		edma_set_transfer_params(prtd->asp_link[1], acnt, fifo_level,
+				count, fifo_level, ABSYNC);
+	}
+
+	link = prtd->ram_link;
+	edma_set_src_index(link, ping_size, ram_src_cidx);
+	edma_set_dest_index(link, ping_size, ram_dst_cidx);
+	edma_set_transfer_params(link, ping_size, 2,
+			runtime->periods, 2, ASYNC);
+
+	/* init master params */
+	edma_read_slot(prtd->asp_link[0], &prtd->asp_params);
+	edma_read_slot(prtd->ram_link, &prtd->ram_params);
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		struct edmacc_param p_ram;
+		/* Copy entire iram buffer before playback started */
+		prtd->ram_params.a_b_cnt = (1 << 16) | (ping_size << 1);
+		/* 0 dst_bidx */
+		prtd->ram_params.src_dst_bidx = (ping_size << 1);
+		/* 0 dst_cidx */
+		prtd->ram_params.src_dst_cidx = (ping_size << 1);
+		prtd->ram_params.ccnt = 1;
+
+		/* Skip 1st period */
+		edma_read_slot(prtd->ram_link, &p_ram);
+		p_ram.src += (ping_size << 1);
+		p_ram.ccnt -= 1;
+		edma_write_slot(prtd->ram_link2, &p_ram);
+		/*
+		 * When 1st started, ram -> iram dma channel will fill the
+		 * entire iram.  Then, whenever a ping/pong asp buffer finishes,
+		 * 1/2 iram will be filled.
+		 */
+		prtd->ram_params.link_bcntrld =
+			EDMA_CHAN_SLOT(prtd->ram_link2) << 5;
+	}
+	return 0;
+}
+
+/* 1 asp tx or rx channel using 2 parameter channels
+ * 1 ram to/from iram channel using 1 parameter channel
+ *
+ * Playback
+ * ram copy channel kicks off first,
+ * 1st ram copy of entire iram buffer completion kicks off asp channel
+ * asp tcc always kicks off ram copy of 1/2 iram buffer
+ *
+ * Record
+ * asp channel starts, tcc kicks off ram copy
+ */
+static int request_ping_pong(struct snd_pcm_substream *substream,
+		struct davinci_runtime_data *prtd,
+		struct snd_dma_buffer *iram_dma)
+{
+	dma_addr_t asp_src_ping;
+	dma_addr_t asp_dst_ping;
+	int link;
+	struct davinci_pcm_dma_params *params = prtd->params;
+
+	/* Request ram master channel */
+	link = prtd->ram_channel = edma_alloc_channel(EDMA_CHANNEL_ANY,
+				  davinci_pcm_dma_irq, substream,
+				  EVENTQ_1);
+	if (link < 0)
+		goto exit1;
+
+	/* Request ram link channel */
+	link = prtd->ram_link = edma_alloc_slot(
+			EDMA_CTLR(prtd->ram_channel), EDMA_SLOT_ANY);
+	if (link < 0)
+		goto exit2;
+
+	link = prtd->asp_link[1] = edma_alloc_slot(
+			EDMA_CTLR(prtd->asp_channel), EDMA_SLOT_ANY);
+	if (link < 0)
+		goto exit3;
+
+	prtd->ram_link2 = -1;
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		link = prtd->ram_link2 = edma_alloc_slot(
+			EDMA_CTLR(prtd->ram_channel), EDMA_SLOT_ANY);
+		if (link < 0)
+			goto exit4;
+	}
+	/* circle ping-pong buffers */
+	edma_link(prtd->asp_link[0], prtd->asp_link[1]);
+	edma_link(prtd->asp_link[1], prtd->asp_link[0]);
+	/* circle ram buffers */
+	edma_link(prtd->ram_link, prtd->ram_link);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		asp_src_ping = iram_dma->addr;
+		asp_dst_ping = params->dma_addr;	/* fifo */
+	} else {
+		asp_src_ping = params->dma_addr;	/* fifo */
+		asp_dst_ping = iram_dma->addr;
+	}
+	/* ping */
+	link = prtd->asp_link[0];
+	edma_set_src(link, asp_src_ping, INCR, W16BIT);
+	edma_set_dest(link, asp_dst_ping, INCR, W16BIT);
+	edma_set_src_index(link, 0, 0);
+	edma_set_dest_index(link, 0, 0);
+
+	edma_read_slot(link, &prtd->asp_params);
+	prtd->asp_params.opt &= ~(TCCMODE | EDMA_TCC(0x3f) | TCINTEN);
+	prtd->asp_params.opt |= TCCHEN | EDMA_TCC(prtd->ram_channel & 0x3f);
+	edma_write_slot(link, &prtd->asp_params);
+
+	/* pong */
+	link = prtd->asp_link[1];
+	edma_set_src(link, asp_src_ping, INCR, W16BIT);
+	edma_set_dest(link, asp_dst_ping, INCR, W16BIT);
+	edma_set_src_index(link, 0, 0);
+	edma_set_dest_index(link, 0, 0);
+
+	edma_read_slot(link, &prtd->asp_params);
+	prtd->asp_params.opt &= ~(TCCMODE | EDMA_TCC(0x3f));
+	/* interrupt after every pong completion */
+	prtd->asp_params.opt |= TCINTEN | TCCHEN |
+		EDMA_TCC(EDMA_CHAN_SLOT(prtd->ram_channel));
+	edma_write_slot(link, &prtd->asp_params);
+
+	/* ram */
+	link = prtd->ram_link;
+	edma_set_src(link, iram_dma->addr, INCR, W32BIT);
+	edma_set_dest(link, iram_dma->addr, INCR, W32BIT);
+	pr_debug("%s: audio dma channels/slots in use for ram:%u %u %u,"
+		"for asp:%u %u %u\n", __func__,
+		prtd->ram_channel, prtd->ram_link, prtd->ram_link2,
+		prtd->asp_channel, prtd->asp_link[0],
+		prtd->asp_link[1]);
+	return 0;
+exit4:
+	edma_free_channel(prtd->asp_link[1]);
+	prtd->asp_link[1] = -1;
+exit3:
+	edma_free_channel(prtd->ram_link);
+	prtd->ram_link = -1;
+exit2:
+	edma_free_channel(prtd->ram_channel);
+	prtd->ram_channel = -1;
+exit1:
+	return link;
+}
+
 static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 {
+	struct snd_dma_buffer *iram_dma;
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct edmacc_param p_ram;
-	int ret;
+	struct davinci_pcm_dma_params *params = prtd->params;
+	int link;
 
-	/* Request master DMA channel */
-	ret = edma_alloc_channel(prtd->params->channel,
-				  davinci_pcm_dma_irq, substream,
-				  EVENTQ_0);
-	if (ret < 0)
-		return ret;
-	prtd->master_lch = ret;
+	if (!params)
+		return -ENODEV;
 
-	/* Request parameter RAM reload slot */
-	ret = edma_alloc_slot(EDMA_CTLR(prtd->master_lch), EDMA_SLOT_ANY);
-	if (ret < 0) {
-		edma_free_channel(prtd->master_lch);
-		return ret;
+	/* Request asp master DMA channel */
+	link = prtd->asp_channel = edma_alloc_channel(params->channel,
+			davinci_pcm_dma_irq, substream, EVENTQ_0);
+	if (link < 0)
+		goto exit1;
+
+	/* Request asp link channels */
+	link = prtd->asp_link[0] = edma_alloc_slot(
+			EDMA_CTLR(prtd->asp_channel), EDMA_SLOT_ANY);
+	if (link < 0)
+		goto exit2;
+
+	iram_dma = (struct snd_dma_buffer *)substream->dma_buffer.private_data;
+	if (iram_dma) {
+		if (request_ping_pong(substream, prtd, iram_dma) == 0)
+			return 0;
+		printk(KERN_WARNING "%s: dma channel allocation failed,"
+				"not using sram\n", __func__);
 	}
-	prtd->slave_lch = ret;
 
 	/* Issue transfer completion IRQ when the channel completes a
 	 * transfer, then always reload from the same slot (by a kind
@@ -154,12 +504,17 @@
 	 * the buffer and its length (ccnt) ... use it as a template
 	 * so davinci_pcm_enqueue_dma() takes less time in IRQ.
 	 */
-	edma_read_slot(prtd->slave_lch, &p_ram);
-	p_ram.opt |= TCINTEN | EDMA_TCC(EDMA_CHAN_SLOT(prtd->master_lch));
-	p_ram.link_bcntrld = EDMA_CHAN_SLOT(prtd->slave_lch) << 5;
-	edma_write_slot(prtd->slave_lch, &p_ram);
-
+	edma_read_slot(link, &prtd->asp_params);
+	prtd->asp_params.opt |= TCINTEN |
+		EDMA_TCC(EDMA_CHAN_SLOT(prtd->asp_channel));
+	prtd->asp_params.link_bcntrld = EDMA_CHAN_SLOT(link) << 5;
+	edma_write_slot(link, &prtd->asp_params);
 	return 0;
+exit2:
+	edma_free_channel(prtd->asp_channel);
+	prtd->asp_channel = -1;
+exit1:
+	return link;
 }
 
 static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
@@ -173,12 +528,12 @@
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		edma_start(prtd->master_lch);
+		edma_resume(prtd->asp_channel);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		edma_stop(prtd->master_lch);
+		edma_pause(prtd->asp_channel);
 		break;
 	default:
 		ret = -EINVAL;
@@ -193,15 +548,37 @@
 static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct edmacc_param temp;
 
+	if (prtd->ram_channel >= 0) {
+		int ret = ping_pong_dma_setup(substream);
+		if (ret < 0)
+			return ret;
+
+		edma_write_slot(prtd->ram_channel, &prtd->ram_params);
+		edma_write_slot(prtd->asp_channel, &prtd->asp_params);
+
+		print_buf_info(prtd->ram_channel, "ram_channel");
+		print_buf_info(prtd->ram_link, "ram_link");
+		print_buf_info(prtd->ram_link2, "ram_link2");
+		print_buf_info(prtd->asp_channel, "asp_channel");
+		print_buf_info(prtd->asp_link[0], "asp_link[0]");
+		print_buf_info(prtd->asp_link[1], "asp_link[1]");
+
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			/* copy 1st iram buffer */
+			edma_start(prtd->ram_channel);
+		}
+		edma_start(prtd->asp_channel);
+		return 0;
+	}
 	prtd->period = 0;
 	davinci_pcm_enqueue_dma(substream);
 
 	/* Copy self-linked parameter RAM entry into master channel */
-	edma_read_slot(prtd->slave_lch, &temp);
-	edma_write_slot(prtd->master_lch, &temp);
+	edma_read_slot(prtd->asp_link[0], &prtd->asp_params);
+	edma_write_slot(prtd->asp_channel, &prtd->asp_params);
 	davinci_pcm_enqueue_dma(substream);
+	edma_start(prtd->asp_channel);
 
 	return 0;
 }
@@ -212,20 +589,53 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd = runtime->private_data;
 	unsigned int offset;
-	dma_addr_t count;
-	dma_addr_t src, dst;
+	int asp_count;
+	dma_addr_t asp_src, asp_dst;
 
 	spin_lock(&prtd->lock);
-
-	edma_get_position(prtd->master_lch, &src, &dst);
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		count = src - runtime->dma_addr;
-	else
-		count = dst - runtime->dma_addr;
-
+	if (prtd->ram_channel >= 0) {
+		int ram_count;
+		int mod_ram;
+		dma_addr_t ram_src, ram_dst;
+		unsigned int period_size = snd_pcm_lib_period_bytes(substream);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+			/* reading ram before asp should be safe
+			 * as long as the asp transfers less than a ping size
+			 * of bytes between the 2 reads
+			 */
+			edma_get_position(prtd->ram_channel,
+					&ram_src, &ram_dst);
+			edma_get_position(prtd->asp_channel,
+					&asp_src, &asp_dst);
+			asp_count = asp_src - prtd->asp_params.src;
+			ram_count = ram_src - prtd->ram_params.src;
+			mod_ram = ram_count % period_size;
+			mod_ram -= asp_count;
+			if (mod_ram < 0)
+				mod_ram += period_size;
+			else if (mod_ram == 0) {
+				if (snd_pcm_running(substream))
+					mod_ram += period_size;
+			}
+			ram_count -= mod_ram;
+			if (ram_count < 0)
+				ram_count += period_size * runtime->periods;
+		} else {
+			edma_get_position(prtd->ram_channel,
+					&ram_src, &ram_dst);
+			ram_count = ram_dst - prtd->ram_params.dst;
+		}
+		asp_count = ram_count;
+	} else {
+		edma_get_position(prtd->asp_channel, &asp_src, &asp_dst);
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			asp_count = asp_src - runtime->dma_addr;
+		else
+			asp_count = asp_dst - runtime->dma_addr;
+	}
 	spin_unlock(&prtd->lock);
 
-	offset = bytes_to_frames(runtime, count);
+	offset = bytes_to_frames(runtime, asp_count);
 	if (offset >= runtime->buffer_size)
 		offset = 0;
 
@@ -236,14 +646,19 @@
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd;
+	struct snd_pcm_hardware *ppcm;
 	int ret = 0;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct davinci_pcm_dma_params *pa = rtd->dai->cpu_dai->private_data;
-	struct davinci_pcm_dma_params *params = &pa[substream->stream];
-	if (!params)
+	struct davinci_pcm_dma_params *pa = rtd->dai->cpu_dai->dma_data;
+	struct davinci_pcm_dma_params *params;
+	if (!pa)
 		return -ENODEV;
+	params = &pa[substream->stream];
 
-	snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware);
+	ppcm = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+			&pcm_hardware_playback : &pcm_hardware_capture;
+	allocate_sram(substream, params->sram_size, ppcm);
+	snd_soc_set_runtime_hwparams(substream, ppcm);
 	/* ensure that buffer size is a multiple of period size */
 	ret = snd_pcm_hw_constraint_integer(runtime,
 						SNDRV_PCM_HW_PARAM_PERIODS);
@@ -256,6 +671,11 @@
 
 	spin_lock_init(&prtd->lock);
 	prtd->params = params;
+	prtd->asp_channel = -1;
+	prtd->asp_link[0] = prtd->asp_link[1] = -1;
+	prtd->ram_channel = -1;
+	prtd->ram_link = -1;
+	prtd->ram_link2 = -1;
 
 	runtime->private_data = prtd;
 
@@ -273,10 +693,29 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd = runtime->private_data;
 
-	edma_unlink(prtd->slave_lch);
+	if (prtd->ram_channel >= 0)
+		edma_stop(prtd->ram_channel);
+	if (prtd->asp_channel >= 0)
+		edma_stop(prtd->asp_channel);
+	if (prtd->asp_link[0] >= 0)
+		edma_unlink(prtd->asp_link[0]);
+	if (prtd->asp_link[1] >= 0)
+		edma_unlink(prtd->asp_link[1]);
+	if (prtd->ram_link >= 0)
+		edma_unlink(prtd->ram_link);
 
-	edma_free_slot(prtd->slave_lch);
-	edma_free_channel(prtd->master_lch);
+	if (prtd->asp_link[0] >= 0)
+		edma_free_slot(prtd->asp_link[0]);
+	if (prtd->asp_link[1] >= 0)
+		edma_free_slot(prtd->asp_link[1]);
+	if (prtd->asp_channel >= 0)
+		edma_free_channel(prtd->asp_channel);
+	if (prtd->ram_link >= 0)
+		edma_free_slot(prtd->ram_link);
+	if (prtd->ram_link2 >= 0)
+		edma_free_slot(prtd->ram_link2);
+	if (prtd->ram_channel >= 0)
+		edma_free_channel(prtd->ram_channel);
 
 	kfree(prtd);
 
@@ -318,11 +757,11 @@
 	.mmap = 	davinci_pcm_mmap,
 };
 
-static int davinci_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+static int davinci_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream,
+		size_t size)
 {
 	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
 	struct snd_dma_buffer *buf = &substream->dma_buffer;
-	size_t size = davinci_pcm_hardware.buffer_bytes_max;
 
 	buf->dev.type = SNDRV_DMA_TYPE_DEV;
 	buf->dev.dev = pcm->card->dev;
@@ -347,6 +786,7 @@
 	int stream;
 
 	for (stream = 0; stream < 2; stream++) {
+		struct snd_dma_buffer *iram_dma;
 		substream = pcm->streams[stream].substream;
 		if (!substream)
 			continue;
@@ -358,6 +798,11 @@
 		dma_free_writecombine(pcm->card->dev, buf->bytes,
 				      buf->area, buf->addr);
 		buf->area = NULL;
+		iram_dma = (struct snd_dma_buffer *)buf->private_data;
+		if (iram_dma) {
+			sram_free(iram_dma->area, iram_dma->bytes);
+			kfree(iram_dma);
+		}
 	}
 }
 
@@ -375,14 +820,16 @@
 
 	if (dai->playback.channels_min) {
 		ret = davinci_pcm_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_PLAYBACK);
+			SNDRV_PCM_STREAM_PLAYBACK,
+			pcm_hardware_playback.buffer_bytes_max);
 		if (ret)
 			return ret;
 	}
 
 	if (dai->capture.channels_min) {
 		ret = davinci_pcm_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_CAPTURE);
+			SNDRV_PCM_STREAM_CAPTURE,
+			pcm_hardware_capture.buffer_bytes_max);
 		if (ret)
 			return ret;
 	}
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index 8746606..0764944 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -20,9 +20,11 @@
 	int channel;			/* sync dma channel ID */
 	unsigned short acnt;
 	dma_addr_t dma_addr;		/* device physical address for DMA */
+	unsigned sram_size;
 	enum dma_event_q eventq_no;	/* event queue number */
 	unsigned char data_type;	/* xfer data type */
 	unsigned char convert_mono_stereo;
+	unsigned int fifo_level;
 };
 
 
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index 6096d22..30ed568 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -58,47 +58,15 @@
 	/* Prepare and enqueue the next buffer descriptor */
 	bd = bcom_prepare_next_buffer(s->bcom_task);
 	bd->status = s->period_bytes;
-	bd->data[0] = s->period_next_pt;
+	bd->data[0] = s->runtime->dma_addr + (s->period_next * s->period_bytes);
 	bcom_submit_next_buffer(s->bcom_task, NULL);
 
 	/* Update for next period */
-	s->period_next_pt += s->period_bytes;
-	if (s->period_next_pt >= s->period_end)
-		s->period_next_pt = s->period_start;
-}
-
-static void psc_dma_bcom_enqueue_tx(struct psc_dma_stream *s)
-{
-	if (s->appl_ptr > s->runtime->control->appl_ptr) {
-		/*
-		 * In this case s->runtime->control->appl_ptr has wrapped around.
-		 * Play the data to the end of the boundary, then wrap our own
-		 * appl_ptr back around.
-		 */
-		while (s->appl_ptr < s->runtime->boundary) {
-			if (bcom_queue_full(s->bcom_task))
-				return;
-
-			s->appl_ptr += s->period_size;
-
-			psc_dma_bcom_enqueue_next_buffer(s);
-		}
-		s->appl_ptr -= s->runtime->boundary;
-	}
-
-	while (s->appl_ptr < s->runtime->control->appl_ptr) {
-
-		if (bcom_queue_full(s->bcom_task))
-			return;
-
-		s->appl_ptr += s->period_size;
-
-		psc_dma_bcom_enqueue_next_buffer(s);
-	}
+	s->period_next = (s->period_next + 1) % s->runtime->periods;
 }
 
 /* Bestcomm DMA irq handler */
-static irqreturn_t psc_dma_bcom_irq_tx(int irq, void *_psc_dma_stream)
+static irqreturn_t psc_dma_bcom_irq(int irq, void *_psc_dma_stream)
 {
 	struct psc_dma_stream *s = _psc_dma_stream;
 
@@ -108,34 +76,8 @@
 	while (bcom_buffer_done(s->bcom_task)) {
 		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
 
-		s->period_current_pt += s->period_bytes;
-		if (s->period_current_pt >= s->period_end)
-			s->period_current_pt = s->period_start;
-	}
-	psc_dma_bcom_enqueue_tx(s);
-	spin_unlock(&s->psc_dma->lock);
-
-	/* If the stream is active, then also inform the PCM middle layer
-	 * of the period finished event. */
-	if (s->active)
-		snd_pcm_period_elapsed(s->stream);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t psc_dma_bcom_irq_rx(int irq, void *_psc_dma_stream)
-{
-	struct psc_dma_stream *s = _psc_dma_stream;
-
-	spin_lock(&s->psc_dma->lock);
-	/* For each finished period, dequeue the completed period buffer
-	 * and enqueue a new one in it's place. */
-	while (bcom_buffer_done(s->bcom_task)) {
-		bcom_retrieve_buffer(s->bcom_task, NULL, NULL);
-
-		s->period_current_pt += s->period_bytes;
-		if (s->period_current_pt >= s->period_end)
-			s->period_current_pt = s->period_start;
+		s->period_current = (s->period_current+1) % s->runtime->periods;
+		s->period_count++;
 
 		psc_dma_bcom_enqueue_next_buffer(s);
 	}
@@ -166,54 +108,38 @@
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct psc_dma_stream *s;
+	struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
 	struct mpc52xx_psc __iomem *regs = psc_dma->psc_regs;
 	u16 imr;
 	unsigned long flags;
 	int i;
 
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-		s = &psc_dma->capture;
-	else
-		s = &psc_dma->playback;
-
-	dev_dbg(psc_dma->dev, "psc_dma_trigger(substream=%p, cmd=%i)"
-		" stream_id=%i\n",
-		substream, cmd, substream->pstr->stream);
-
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
+		dev_dbg(psc_dma->dev, "START: stream=%i fbits=%u ps=%u #p=%u\n",
+			substream->pstr->stream, runtime->frame_bits,
+			(int)runtime->period_size, runtime->periods);
 		s->period_bytes = frames_to_bytes(runtime,
 						  runtime->period_size);
-		s->period_start = virt_to_phys(runtime->dma_area);
-		s->period_end = s->period_start +
-				(s->period_bytes * runtime->periods);
-		s->period_next_pt = s->period_start;
-		s->period_current_pt = s->period_start;
-		s->period_size = runtime->period_size;
+		s->period_next = 0;
+		s->period_current = 0;
 		s->active = 1;
-
-		/* track appl_ptr so that we have a better chance of detecting
-		 * end of stream and not over running it.
-		 */
+		s->period_count = 0;
 		s->runtime = runtime;
-		s->appl_ptr = s->runtime->control->appl_ptr -
-				(runtime->period_size * runtime->periods);
 
 		/* Fill up the bestcomm bd queue and enable DMA.
 		 * This will begin filling the PSC's fifo.
 		 */
 		spin_lock_irqsave(&psc_dma->lock, flags);
 
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
+		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
 			bcom_gen_bd_rx_reset(s->bcom_task);
-			for (i = 0; i < runtime->periods; i++)
-				if (!bcom_queue_full(s->bcom_task))
-					psc_dma_bcom_enqueue_next_buffer(s);
-		} else {
+		else
 			bcom_gen_bd_tx_reset(s->bcom_task);
-			psc_dma_bcom_enqueue_tx(s);
-		}
+
+		for (i = 0; i < runtime->periods; i++)
+			if (!bcom_queue_full(s->bcom_task))
+				psc_dma_bcom_enqueue_next_buffer(s);
 
 		bcom_enable(s->bcom_task);
 		spin_unlock_irqrestore(&psc_dma->lock, flags);
@@ -223,6 +149,8 @@
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
+		dev_dbg(psc_dma->dev, "STOP: stream=%i periods_count=%i\n",
+			substream->pstr->stream, s->period_count);
 		s->active = 0;
 
 		spin_lock_irqsave(&psc_dma->lock, flags);
@@ -236,7 +164,8 @@
 		break;
 
 	default:
-		dev_dbg(psc_dma->dev, "invalid command\n");
+		dev_dbg(psc_dma->dev, "unhandled trigger: stream=%i cmd=%i\n",
+			substream->pstr->stream, cmd);
 		return -EINVAL;
 	}
 
@@ -343,7 +272,7 @@
 	else
 		s = &psc_dma->playback;
 
-	count = s->period_current_pt - s->period_start;
+	count = s->period_current * s->period_bytes;
 
 	return bytes_to_frames(substream->runtime, count);
 }
@@ -532,11 +461,9 @@
 
 	rc = request_irq(psc_dma->irq, &psc_dma_status_irq, IRQF_SHARED,
 			 "psc-dma-status", psc_dma);
-	rc |= request_irq(psc_dma->capture.irq,
-			  &psc_dma_bcom_irq_rx, IRQF_SHARED,
+	rc |= request_irq(psc_dma->capture.irq, &psc_dma_bcom_irq, IRQF_SHARED,
 			  "psc-dma-capture", &psc_dma->capture);
-	rc |= request_irq(psc_dma->playback.irq,
-			  &psc_dma_bcom_irq_tx, IRQF_SHARED,
+	rc |= request_irq(psc_dma->playback.irq, &psc_dma_bcom_irq, IRQF_SHARED,
 			  "psc-dma-playback", &psc_dma->playback);
 	if (rc) {
 		ret = -ENODEV;
diff --git a/sound/soc/fsl/mpc5200_dma.h b/sound/soc/fsl/mpc5200_dma.h
index 8d396bb..22208b3 100644
--- a/sound/soc/fsl/mpc5200_dma.h
+++ b/sound/soc/fsl/mpc5200_dma.h
@@ -13,26 +13,25 @@
  * @psc_dma:		pointer back to parent psc_dma data structure
  * @bcom_task:		bestcomm task structure
  * @irq:		irq number for bestcomm task
- * @period_start:	physical address of start of DMA region
  * @period_end:		physical address of end of DMA region
  * @period_next_pt:	physical address of next DMA buffer to enqueue
  * @period_bytes:	size of DMA period in bytes
+ * @ac97_slot_bits:	Enable bits for turning on the correct AC97 slot
  */
 struct psc_dma_stream {
 	struct snd_pcm_runtime *runtime;
-	snd_pcm_uframes_t appl_ptr;
-
 	int active;
 	struct psc_dma *psc_dma;
 	struct bcom_task *bcom_task;
 	int irq;
 	struct snd_pcm_substream *stream;
-	dma_addr_t period_start;
-	dma_addr_t period_end;
-	dma_addr_t period_next_pt;
-	dma_addr_t period_current_pt;
+	int period_next;
+	int period_current;
 	int period_bytes;
-	int period_size;
+	int period_count;
+
+	/* AC97 state */
+	u32 ac97_slot_bits;
 };
 
 /**
@@ -73,6 +72,15 @@
 	} stats;
 };
 
+/* Utility for retrieving psc_dma_stream structure from a substream */
+inline struct psc_dma_stream *
+to_psc_dma_stream(struct snd_pcm_substream *substream, struct psc_dma *psc_dma)
+{
+	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
+		return &psc_dma->capture;
+	return &psc_dma->playback;
+}
+
 int mpc5200_audio_dma_create(struct of_device *op);
 int mpc5200_audio_dma_destroy(struct of_device *op);
 
diff --git a/sound/soc/fsl/mpc5200_psc_ac97.c b/sound/soc/fsl/mpc5200_psc_ac97.c
index c4ae3e0..3dbc7f7 100644
--- a/sound/soc/fsl/mpc5200_psc_ac97.c
+++ b/sound/soc/fsl/mpc5200_psc_ac97.c
@@ -130,6 +130,7 @@
 				 struct snd_soc_dai *cpu_dai)
 {
 	struct psc_dma *psc_dma = cpu_dai->private_data;
+	struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
 
 	dev_dbg(psc_dma->dev, "%s(substream=%p) p_size=%i p_bytes=%i"
 		" periods=%i buffer_size=%i  buffer_bytes=%i channels=%i"
@@ -140,20 +141,10 @@
 		params_channels(params), params_rate(params),
 		params_format(params));
 
-
-	if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE) {
-		if (params_channels(params) == 1)
-			psc_dma->slots |= 0x00000100;
-		else
-			psc_dma->slots |= 0x00000300;
-	} else {
-		if (params_channels(params) == 1)
-			psc_dma->slots |= 0x01000000;
-		else
-			psc_dma->slots |= 0x03000000;
-	}
-	out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
-
+	/* Determine the set of enable bits to turn on */
+	s->ac97_slot_bits = (params_channels(params) == 1) ? 0x100 : 0x300;
+	if (substream->pstr->stream != SNDRV_PCM_STREAM_CAPTURE)
+		s->ac97_slot_bits <<= 16;
 	return 0;
 }
 
@@ -163,6 +154,8 @@
 {
 	struct psc_dma *psc_dma = cpu_dai->private_data;
 
+	dev_dbg(psc_dma->dev, "%s(substream=%p)\n", __func__, substream);
+
 	if (params_channels(params) == 1)
 		out_be32(&psc_dma->psc_regs->ac97_slots, 0x01000000);
 	else
@@ -176,14 +169,24 @@
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct psc_dma *psc_dma = rtd->dai->cpu_dai->private_data;
+	struct psc_dma_stream *s = to_psc_dma_stream(substream, psc_dma);
 
 	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_STOP:
-		if (substream->pstr->stream == SNDRV_PCM_STREAM_CAPTURE)
-			psc_dma->slots &= 0xFFFF0000;
-		else
-			psc_dma->slots &= 0x0000FFFF;
+	case SNDRV_PCM_TRIGGER_START:
+		dev_dbg(psc_dma->dev, "AC97 START: stream=%i\n",
+			substream->pstr->stream);
 
+		/* Set the slot enable bits */
+		psc_dma->slots |= s->ac97_slot_bits;
+		out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+		dev_dbg(psc_dma->dev, "AC97 STOP: stream=%i\n",
+			substream->pstr->stream);
+
+		/* Clear the slot enable bits */
+		psc_dma->slots &= ~(s->ac97_slot_bits);
 		out_be32(&psc_dma->psc_regs->ac97_slots, psc_dma->slots);
 		break;
 	}
diff --git a/sound/soc/imx/mx27vis_wm8974.c b/sound/soc/imx/mx27vis_wm8974.c
index e4dcb53..0267d2d 100644
--- a/sound/soc/imx/mx27vis_wm8974.c
+++ b/sound/soc/imx/mx27vis_wm8974.c
@@ -157,7 +157,7 @@
 
 
 	/* codec PLL input is 25 MHz */
-	ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG,
+	ret = codec_dai->ops->set_pll(codec_dai, IGNORED_ARG, IGNORED_ARG,
 					25000000, pll_out);
 	if (ret < 0) {
 		printk(KERN_ERR "Error when setting PLL input\n");
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 653a362..61952aa 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -43,12 +43,13 @@
 	  Say Y if you want to add support for SoC audio on osk5912.
 
 config SND_OMAP_SOC_OVERO
-	tristate "SoC Audio support for Gumstix Overo"
-	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OVERO
+	tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35"
+	depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35)
 	select SND_OMAP_SOC_MCBSP
 	select SND_SOC_TWL4030
 	help
-	  Say Y if you want to add support for SoC audio on the Gumstix Overo.
+	  Say Y if you want to add support for SoC audio on the
+	  Gumstix Overo or CompuLab CM-T35
 
 config SND_OMAP_SOC_OMAP2EVM
 	tristate "SoC Audio support for OMAP2EVM board"
@@ -66,6 +67,15 @@
 	help
 	  Say Y if you want to add support for SoC audio on the omap3evm board.
 
+config SND_OMAP_SOC_AM3517EVM
+	tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
+	depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TLV320AIC23
+	help
+	  Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
+	  EVM.
+
 config SND_OMAP_SOC_SDP3430
 	tristate "SoC Audio support for Texas Instruments SDP3430"
 	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
@@ -99,3 +109,10 @@
 	help
 	  Say Y if you want to add support for Soc audio on Zoom2 board.
 
+config SND_OMAP_SOC_IGEP0020
+	tristate "SoC Audio support for IGEP v2"
+	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020
+	select SND_OMAP_SOC_MCBSP
+	select SND_SOC_TWL4030
+	help
+	  Say Y if you want to add support for Soc audio on IGEP v2 board.
diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
index 02d6947..d49458a 100644
--- a/sound/soc/omap/Makefile
+++ b/sound/soc/omap/Makefile
@@ -12,10 +12,12 @@
 snd-soc-overo-objs := overo.o
 snd-soc-omap2evm-objs := omap2evm.o
 snd-soc-omap3evm-objs := omap3evm.o
+snd-soc-am3517evm-objs := am3517evm.o
 snd-soc-sdp3430-objs := sdp3430.o
 snd-soc-omap3pandora-objs := omap3pandora.o
 snd-soc-omap3beagle-objs := omap3beagle.o
 snd-soc-zoom2-objs := zoom2.o
+snd-soc-igep0020-objs := igep0020.o
 
 obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
 obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o
@@ -23,7 +25,9 @@
 obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
 obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
 obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o
+obj-$(CONFIG_MACH_OMAP3517EVM) += snd-soc-am3517evm.o
 obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
 obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
 obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o
+obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o
diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c
new file mode 100644
index 0000000..135901b
--- /dev/null
+++ b/sound/soc/omap/am3517evm.c
@@ -0,0 +1,202 @@
+/*
+ * am3517evm.c  -- ALSA SoC support for OMAP3517 / AM3517 EVM
+ *
+ * Author: Anuj Aggarwal <anuj.aggarwal@ti.com>
+ *
+ * Based on sound/soc/omap/beagle.c by Steve Sakoman
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <plat/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+
+#include "../codecs/tlv320aic23.h"
+
+#define CODEC_CLOCK 	12000000
+
+static int am3517evm_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_DSP_B |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_DSP_B |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+			CODEC_CLOCK, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_CLKR_SRC_CLKX, 0,
+				SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_CLKR_SRC_CLKX\n");
+		return ret;
+	}
+
+	snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0,
+				SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops am3517evm_ops = {
+	.hw_params = am3517evm_hw_params,
+};
+
+/* am3517evm machine dapm widgets */
+static const struct snd_soc_dapm_widget tlv320aic23_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Line Out", NULL),
+	SND_SOC_DAPM_LINE("Line In", NULL),
+	SND_SOC_DAPM_MIC("Mic In", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Line Out connected to LLOUT, RLOUT */
+	{"Line Out", NULL, "LOUT"},
+	{"Line Out", NULL, "ROUT"},
+
+	{"LLINEIN", NULL, "Line In"},
+	{"RLINEIN", NULL, "Line In"},
+
+	{"MICIN", NULL, "Mic In"},
+};
+
+static int am3517evm_aic23_init(struct snd_soc_codec *codec)
+{
+	/* Add am3517-evm specific widgets */
+	snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets,
+				  ARRAY_SIZE(tlv320aic23_dapm_widgets));
+
+	/* Set up davinci-evm specific audio path audio_map */
+	snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+	/* always connected */
+	snd_soc_dapm_enable_pin(codec, "Line Out");
+	snd_soc_dapm_enable_pin(codec, "Line In");
+	snd_soc_dapm_enable_pin(codec, "Mic In");
+
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link am3517evm_dai = {
+	.name = "TLV320AIC23",
+	.stream_name = "AIC23",
+	.cpu_dai = &omap_mcbsp_dai[0],
+	.codec_dai = &tlv320aic23_dai,
+	.init = am3517evm_aic23_init,
+	.ops = &am3517evm_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_am3517evm = {
+	.name = "am3517evm",
+	.platform = &omap_soc_platform,
+	.dai_link = &am3517evm_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device am3517evm_snd_devdata = {
+	.card = &snd_soc_am3517evm,
+	.codec_dev = &soc_codec_dev_tlv320aic23,
+};
+
+static struct platform_device *am3517evm_snd_device;
+
+static int __init am3517evm_soc_init(void)
+{
+	int ret;
+
+	if (!machine_is_omap3517evm()) {
+		pr_err("Not OMAP3517 / AM3517 EVM!\n");
+		return -ENODEV;
+	}
+	pr_info("OMAP3517 / AM3517 EVM SoC init\n");
+
+	am3517evm_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!am3517evm_snd_device) {
+		printk(KERN_ERR "Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(am3517evm_snd_device, &am3517evm_snd_devdata);
+	am3517evm_snd_devdata.dev = &am3517evm_snd_device->dev;
+	*(unsigned int *)am3517evm_dai.cpu_dai->private_data = 0; /* McBSP1 */
+
+	ret = platform_device_add(am3517evm_snd_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	printk(KERN_ERR "Unable to add platform device\n");
+	platform_device_put(am3517evm_snd_device);
+
+	return ret;
+}
+
+static void __exit am3517evm_soc_exit(void)
+{
+	platform_device_unregister(am3517evm_snd_device);
+}
+
+module_init(am3517evm_soc_init);
+module_exit(am3517evm_soc_exit);
+
+MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3517 / AM3517 EVM");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/omap/ams-delta.c
index 5a5166a..b0f618e 100644
--- a/sound/soc/omap/ams-delta.c
+++ b/sound/soc/omap/ams-delta.c
@@ -31,8 +31,8 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/board-ams-delta.h>
-#include <mach/mcbsp.h>
+#include <plat/board-ams-delta.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
@@ -40,7 +40,7 @@
 
 
 /* Board specific DAPM widgets */
- const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = {
+static const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = {
 	/* Handset */
 	SND_SOC_DAPM_MIC("Mouthpiece", NULL),
 	SND_SOC_DAPM_HP("Earpiece", NULL),
@@ -81,7 +81,7 @@
 						(1 << AMS_DELTA_SPEAKER))
 #define AMS_DELTA_SPEAKERPHONE	(AMS_DELTA_HANDSFREE | (1 << AMS_DELTA_AGC))
 
-unsigned short ams_delta_audio_mode_pins[] = {
+static const unsigned short ams_delta_audio_mode_pins[] = {
 	AMS_DELTA_MIXED,
 	AMS_DELTA_HANDSET,
 	AMS_DELTA_HANDSFREE,
diff --git a/sound/soc/omap/igep0020.c b/sound/soc/omap/igep0020.c
new file mode 100644
index 0000000..3583c42
--- /dev/null
+++ b/sound/soc/omap/igep0020.c
@@ -0,0 +1,148 @@
+/*
+ * igep0020.c  --  SoC audio for IGEP v2
+ *
+ * Based on sound/soc/omap/overo.c by Steve Sakoman
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <plat/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int igep2_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	/* Set codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec DAI configuration\n");
+		return ret;
+	}
+
+	/* Set cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai,
+				  SND_SOC_DAIFMT_I2S |
+				  SND_SOC_DAIFMT_NB_NF |
+				  SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set cpu DAI configuration\n");
+		return ret;
+	}
+
+	/* Set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+					    SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		printk(KERN_ERR "can't set codec system clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct snd_soc_ops igep2_ops = {
+	.hw_params = igep2_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link igep2_dai = {
+	.name = "TWL4030",
+	.stream_name = "TWL4030",
+	.cpu_dai = &omap_mcbsp_dai[0],
+	.codec_dai = &twl4030_dai[TWL4030_DAI_HIFI],
+	.ops = &igep2_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_card_igep2 = {
+	.name = "igep2",
+	.platform = &omap_soc_platform,
+	.dai_link = &igep2_dai,
+	.num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device igep2_snd_devdata = {
+	.card = &snd_soc_card_igep2,
+	.codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *igep2_snd_device;
+
+static int __init igep2_soc_init(void)
+{
+	int ret;
+
+	if (!machine_is_igep0020()) {
+		pr_debug("Not IGEP v2!\n");
+		return -ENODEV;
+	}
+	printk(KERN_INFO "IGEP v2 SoC init\n");
+
+	igep2_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!igep2_snd_device) {
+		printk(KERN_ERR "Platform device allocation failed\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(igep2_snd_device, &igep2_snd_devdata);
+	igep2_snd_devdata.dev = &igep2_snd_device->dev;
+	*(unsigned int *)igep2_dai.cpu_dai->private_data = 1; /* McBSP2 */
+
+	ret = platform_device_add(igep2_snd_device);
+	if (ret)
+		goto err1;
+
+	return 0;
+
+err1:
+	printk(KERN_ERR "Unable to add platform device\n");
+	platform_device_put(igep2_snd_device);
+
+	return ret;
+}
+module_init(igep2_soc_init);
+
+static void __exit igep2_soc_exit(void)
+{
+	platform_device_unregister(igep2_snd_device);
+}
+module_exit(igep2_soc_exit);
+
+MODULE_AUTHOR("Enric Balletbo i Serra <eballetbo@iseebcn.com>");
+MODULE_DESCRIPTION("ALSA SoC IGEP v2");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 0a50593..08e09d7 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <linux/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index 3341f49..6bbbd2a 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -31,9 +31,9 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <mach/control.h>
-#include <mach/dma.h>
-#include <mach/mcbsp.h>
+#include <plat/control.h>
+#include <plat/dma.h>
+#include <plat/mcbsp.h>
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
 
@@ -49,6 +49,8 @@
 	 */
 	int				active;
 	int				configured;
+	unsigned int			in_freq;
+	int				clk_div;
 };
 
 #define to_mcbsp(priv)	container_of((priv), struct omap_mcbsp_data, bus_id)
@@ -257,7 +259,7 @@
 	int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
 	int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
 	unsigned long port;
-	unsigned int format;
+	unsigned int format, div, framesize, master;
 
 	if (cpu_class_is_omap1()) {
 		dma = omap1_dma_reqs[bus_id][substream->stream];
@@ -294,28 +296,19 @@
 
 	format = mcbsp_data->fmt & SND_SOC_DAIFMT_FORMAT_MASK;
 	wpf = channels = params_channels(params);
-	switch (channels) {
-	case 2:
-		if (format == SND_SOC_DAIFMT_I2S) {
-			/* Use dual-phase frames */
-			regs->rcr2	|= RPHASE;
-			regs->xcr2	|= XPHASE;
-			/* Set 1 word per (McBSP) frame for phase1 and phase2 */
-			wpf--;
-			regs->rcr2	|= RFRLEN2(wpf - 1);
-			regs->xcr2	|= XFRLEN2(wpf - 1);
-		}
-	case 1:
-	case 4:
-		/* Set word per (McBSP) frame for phase1 */
-		regs->rcr1	|= RFRLEN1(wpf - 1);
-		regs->xcr1	|= XFRLEN1(wpf - 1);
-		break;
-	default:
-		/* Unsupported number of channels */
-		return -EINVAL;
+	if (channels == 2 && format == SND_SOC_DAIFMT_I2S) {
+		/* Use dual-phase frames */
+		regs->rcr2	|= RPHASE;
+		regs->xcr2	|= XPHASE;
+		/* Set 1 word per (McBSP) frame for phase1 and phase2 */
+		wpf--;
+		regs->rcr2	|= RFRLEN2(wpf - 1);
+		regs->xcr2	|= XFRLEN2(wpf - 1);
 	}
 
+	regs->rcr1	|= RFRLEN1(wpf - 1);
+	regs->xcr1	|= XFRLEN1(wpf - 1);
+
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S16_LE:
 		/* Set word lengths */
@@ -330,15 +323,30 @@
 		return -EINVAL;
 	}
 
+	/* In McBSP master modes, FRAME (i.e. sample rate) is generated
+	 * by _counting_ BCLKs. Calculate frame size in BCLKs */
+	master = mcbsp_data->fmt & SND_SOC_DAIFMT_MASTER_MASK;
+	if (master ==	SND_SOC_DAIFMT_CBS_CFS) {
+		div = mcbsp_data->clk_div ? mcbsp_data->clk_div : 1;
+		framesize = (mcbsp_data->in_freq / div) / params_rate(params);
+
+		if (framesize < wlen * channels) {
+			printk(KERN_ERR "%s: not enough bandwidth for desired rate and "
+					"channels\n", __func__);
+			return -EINVAL;
+		}
+	} else
+		framesize = wlen * channels;
+
 	/* Set FS period and length in terms of bit clock periods */
 	switch (format) {
 	case SND_SOC_DAIFMT_I2S:
-		regs->srgr2	|= FPER(wlen * channels - 1);
-		regs->srgr1	|= FWID(wlen - 1);
+		regs->srgr2	|= FPER(framesize - 1);
+		regs->srgr1	|= FWID((framesize >> 1) - 1);
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
 	case SND_SOC_DAIFMT_DSP_B:
-		regs->srgr2	|= FPER(wlen * channels - 1);
+		regs->srgr2	|= FPER(framesize - 1);
 		regs->srgr1	|= FWID(0);
 		break;
 	}
@@ -454,6 +462,7 @@
 	if (div_id != OMAP_MCBSP_CLKGDV)
 		return -ENODEV;
 
+	mcbsp_data->clk_div = div;
 	regs->srgr1	|= CLKGDV(div - 1);
 
 	return 0;
@@ -554,6 +563,8 @@
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int err = 0;
 
+	mcbsp_data->in_freq = freq;
+
 	switch (clk_id) {
 	case OMAP_MCBSP_SYSCLK_CLK:
 		regs->srgr2	|= CLKSM;
@@ -598,13 +609,13 @@
 	.id = (link_id),					\
 	.playback = {						\
 		.channels_min = 1,				\
-		.channels_max = 4,				\
+		.channels_max = 16,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
 	.capture = {						\
 		.channels_min = 1,				\
-		.channels_max = 4,				\
+		.channels_max = 16,				\
 		.rates = OMAP_MCBSP_RATES,			\
 		.formats = SNDRV_PCM_FMTBIT_S16_LE,		\
 	},							\
diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c
index 6a829ee..9db2770 100644
--- a/sound/soc/omap/omap-pcm.c
+++ b/sound/soc/omap/omap-pcm.c
@@ -28,7 +28,7 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/dma.h>
+#include <plat/dma.h>
 #include "omap-pcm.h"
 
 static const struct snd_pcm_hardware omap_pcm_hardware = {
diff --git a/sound/soc/omap/omap2evm.c b/sound/soc/omap/omap2evm.c
index 027e1a4..c7adea3 100644
--- a/sound/soc/omap/omap2evm.c
+++ b/sound/soc/omap/omap2evm.c
@@ -31,7 +31,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
index b0cff9f..d88ad5c 100644
--- a/sound/soc/omap/omap3beagle.c
+++ b/sound/soc/omap/omap3beagle.c
@@ -29,7 +29,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
index 13aa380..dfcb344 100644
--- a/sound/soc/omap/omap3evm.c
+++ b/sound/soc/omap/omap3evm.c
@@ -27,7 +27,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
@@ -93,10 +93,17 @@
 	.num_links = 1,
 };
 
+/* twl4030 setup */
+static struct twl4030_setup_data twl4030_setup = {
+	.ramp_delay_value = 4,
+	.sysclk = 26000,
+};
+
 /* Audio subsystem */
 static struct snd_soc_device omap3evm_snd_devdata = {
 	.card = &snd_soc_omap3evm,
 	.codec_dev = &soc_codec_dev_twl4030,
+	.codec_data = &twl4030_setup,
 };
 
 static struct platform_device *omap3evm_snd_device;
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index 0cd06f5..71b2c16 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -40,9 +40,12 @@
 
 #define PREFIX "ASoC omap3pandora: "
 
-static int omap3pandora_cmn_hw_params(struct snd_soc_dai *codec_dai,
-	struct snd_soc_dai *cpu_dai, unsigned int fmt)
+static int omap3pandora_cmn_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, unsigned int fmt)
 {
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 	int ret;
 
 	/* Set codec DAI configuration */
@@ -68,8 +71,9 @@
 	}
 
 	/* Set McBSP clock to external */
-	ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_SYSCLK_CLKS_EXT, 0,
-					    SND_SOC_CLOCK_IN);
+	ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_SYSCLK_CLKS_EXT,
+				     256 * params_rate(params),
+				     SND_SOC_CLOCK_IN);
 	if (ret < 0) {
 		pr_err(PREFIX "can't set cpu system clock\n");
 		return ret;
@@ -87,11 +91,7 @@
 static int omap3pandora_out_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
-	return omap3pandora_cmn_hw_params(codec_dai, cpu_dai,
+	return omap3pandora_cmn_hw_params(substream, params,
 					  SND_SOC_DAIFMT_I2S |
 					  SND_SOC_DAIFMT_IB_NF |
 					  SND_SOC_DAIFMT_CBS_CFS);
@@ -100,11 +100,7 @@
 static int omap3pandora_in_hw_params(struct snd_pcm_substream *substream,
 	struct snd_pcm_hw_params *params)
 {
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-
-	return omap3pandora_cmn_hw_params(codec_dai, cpu_dai,
+	return omap3pandora_cmn_hw_params(substream, params,
 					  SND_SOC_DAIFMT_I2S |
 					  SND_SOC_DAIFMT_NB_NF |
 					  SND_SOC_DAIFMT_CBS_CFS);
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index a4e149b7..498ca2e 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -31,7 +31,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <linux/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c
index ec4f8fd..c25f527 100644
--- a/sound/soc/omap/overo.c
+++ b/sound/soc/omap/overo.c
@@ -29,7 +29,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
@@ -107,8 +107,8 @@
 {
 	int ret;
 
-	if (!machine_is_overo()) {
-		pr_debug("Not Overo!\n");
+	if (!(machine_is_overo() || machine_is_cm_t35())) {
+		pr_debug("Incomatible machine!\n");
 		return -ENODEV;
 	}
 	printk(KERN_INFO "overo SoC init\n");
diff --git a/sound/soc/omap/sdp3430.c b/sound/soc/omap/sdp3430.c
index 4a3f62d..c071f96 100644
--- a/sound/soc/omap/sdp3430.c
+++ b/sound/soc/omap/sdp3430.c
@@ -34,7 +34,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/omap/zoom2.c b/sound/soc/omap/zoom2.c
index f90b45f..f90a2ac 100644
--- a/sound/soc/omap/zoom2.c
+++ b/sound/soc/omap/zoom2.c
@@ -29,7 +29,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 
 #include "omap-mcbsp.h"
 #include "omap-pcm.h"
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index dcb3181b..376e14a 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -90,7 +90,8 @@
 
 config SND_PXA2XX_SOC_EM_X270
 	tristate "SoC Audio support for CompuLab EM-x270, eXeda and CM-X300"
-	depends on SND_PXA2XX_SOC && MACH_EM_X270
+	depends on SND_PXA2XX_SOC && (MACH_EM_X270 || MACH_EXEDA || \
+			MACH_CM_X300)
 	select SND_PXA2XX_SOC_AC97
 	select SND_SOC_WM9712
 	help
@@ -117,6 +118,15 @@
 	  Say Y if you want to add support for SoC audio on the
 	  Marvell Zylonite reference platform.
 
+config SND_SOC_RAUMFELD
+	tristate "SoC Audio support Raumfeld audio adapter"
+	depends on SND_PXA2XX_SOC && (MACH_RAUMFELD_SPEAKER || MACH_RAUMFELD_CONNECTOR)
+	select SND_PXA_SOC_SSP
+	select SND_SOC_CS4270
+	select SND_SOC_AK4104
+	help
+	  Say Y if you want to add support for SoC audio on Raumfeld devices
+
 config SND_PXA2XX_SOC_MAGICIAN
 	tristate "SoC Audio support for HTC Magician"
 	depends on SND_PXA2XX_SOC && MACH_MAGICIAN
diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile
index 6e096b4..f3e08fd 100644
--- a/sound/soc/pxa/Makefile
+++ b/sound/soc/pxa/Makefile
@@ -23,6 +23,7 @@
 snd-soc-magician-objs := magician.o
 snd-soc-mioa701-objs := mioa701_wm9713.o
 snd-soc-imote2-objs := imote2.o
+snd-soc-raumfeld-objs := raumfeld.o
 
 obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
 obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
@@ -37,3 +38,4 @@
 obj-$(CONFIG_SND_PXA2XX_SOC_MIOA701) += snd-soc-mioa701.o
 obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
 obj-$(CONFIG_SND_PXA2XX_SOC_IMOTE2) += snd-soc-imote2.o
+obj-$(CONFIG_SND_SOC_RAUMFELD) += snd-soc-raumfeld.o
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index 9f7c61e..4c8d99a 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -213,7 +213,7 @@
 		return ret;
 
 	/* set SSP audio pll clock */
-	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, acps);
+	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, acps);
 	if (ret < 0)
 		return ret;
 
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index d11a6d7..3bd7712 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -305,8 +305,8 @@
 /*
  * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
  */
-static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai,
-	int pll_id, unsigned int freq_in, unsigned int freq_out)
+static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
+	int source, unsigned int freq_in, unsigned int freq_out)
 {
 	struct ssp_priv *priv = cpu_dai->private_data;
 	struct ssp_device *ssp = priv->dev.ssp;
@@ -760,13 +760,13 @@
 		.resume = pxa_ssp_resume,
 		.playback = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		},
 		.capture = {
 			 .channels_min = 1,
-			 .channels_max = 2,
+			 .channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		 },
@@ -780,13 +780,13 @@
 		.resume = pxa_ssp_resume,
 		.playback = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		},
 		.capture = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		 },
@@ -801,13 +801,13 @@
 		.resume = pxa_ssp_resume,
 		.playback = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		},
 		.capture = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		 },
@@ -822,13 +822,13 @@
 		.resume = pxa_ssp_resume,
 		.playback = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		},
 		.capture = {
 			.channels_min = 1,
-			.channels_max = 2,
+			.channels_max = 8,
 			.rates = PXA_SSP_RATES,
 			.formats = PXA_SSP_FORMATS,
 		 },
diff --git a/sound/soc/pxa/raumfeld.c b/sound/soc/pxa/raumfeld.c
new file mode 100644
index 0000000..acfce1c
--- /dev/null
+++ b/sound/soc/pxa/raumfeld.c
@@ -0,0 +1,335 @@
+/*
+ * raumfeld_audio.c  --  SoC audio for Raumfeld audio devices
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code from:
+ *
+ *    Wolfson Microelectronics PLC.
+ *    Openedhand Ltd.
+ *    Liam Girdwood <lrg@slimlogic.co.uk>
+ *    Richard Purdie <richard@openedhand.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include "../codecs/cs4270.h"
+#include "../codecs/ak4104.h"
+#include "pxa2xx-pcm.h"
+#include "pxa-ssp.h"
+
+#define GPIO_SPDIF_RESET	(38)
+#define GPIO_MCLK_RESET		(111)
+#define GPIO_CODEC_RESET	(120)
+
+static struct i2c_client *max9486_client;
+static struct i2c_board_info max9486_hwmon_info = {
+	I2C_BOARD_INFO("max9485", 0x63),
+};
+
+#define MAX9485_MCLK_FREQ_112896 0x22
+#define	MAX9485_MCLK_FREQ_122880 0x23
+
+static void set_max9485_clk(char clk)
+{
+	i2c_master_send(max9486_client, &clk, 1);
+}
+
+static void raumfeld_enable_audio(bool en)
+{
+	if (en) {
+		gpio_set_value(GPIO_MCLK_RESET, 1);
+
+		/* wait some time to let the clocks become stable */
+		msleep(100);
+
+		gpio_set_value(GPIO_SPDIF_RESET, 1);
+		gpio_set_value(GPIO_CODEC_RESET, 1);
+	} else {
+		gpio_set_value(GPIO_MCLK_RESET, 0);
+		gpio_set_value(GPIO_SPDIF_RESET, 0);
+		gpio_set_value(GPIO_CODEC_RESET, 0);
+	}
+}
+
+/* CS4270 */
+static int raumfeld_cs4270_startup(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+
+	set_max9485_clk(MAX9485_MCLK_FREQ_112896);
+
+	return snd_soc_dai_set_sysclk(codec_dai, 0, 11289600, 0);
+}
+
+static int raumfeld_cs4270_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	unsigned int fmt, clk = 0;
+	int ret = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		set_max9485_clk(MAX9485_MCLK_FREQ_122880);
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+		set_max9485_clk(MAX9485_MCLK_FREQ_112896);
+		clk = 11289600;
+		break;
+	}
+
+	fmt = SND_SOC_DAIFMT_I2S |
+	      SND_SOC_DAIFMT_NB_NF |
+	      SND_SOC_DAIFMT_CBS_CFS;
+
+	/* setup the CODEC DAI */
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk, 0);
+	if (ret < 0)
+		return ret;
+
+	/* setup the CPU DAI */
+	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, clk);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_DIV_SCR, 4);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_EXT, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops raumfeld_cs4270_ops = {
+	.startup = raumfeld_cs4270_startup,
+	.hw_params = raumfeld_cs4270_hw_params,
+};
+
+static int raumfeld_line_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	raumfeld_enable_audio(false);
+	return 0;
+}
+
+static int raumfeld_line_resume(struct platform_device *pdev)
+{
+	raumfeld_enable_audio(true);
+	return 0;
+}
+
+static struct snd_soc_dai_link raumfeld_line_dai = {
+	.name		= "CS4270",
+	.stream_name	= "CS4270",
+	.cpu_dai	= &pxa_ssp_dai[PXA_DAI_SSP1],
+	.codec_dai	= &cs4270_dai,
+	.ops		= &raumfeld_cs4270_ops,
+};
+
+static struct snd_soc_card snd_soc_line_raumfeld = {
+	.name		= "Raumfeld analog",
+	.platform	= &pxa2xx_soc_platform,
+	.dai_link	= &raumfeld_line_dai,
+	.suspend_post	= raumfeld_line_suspend,
+	.resume_pre	= raumfeld_line_resume,
+	.num_links	= 1,
+};
+
+
+/* AK4104 */
+
+static int raumfeld_ak4104_hw_params(struct snd_pcm_substream *substream,
+				     struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int fmt, ret = 0, clk = 0;
+
+	switch (params_rate(params)) {
+	case 8000:
+	case 16000:
+	case 48000:
+	case 96000:
+		set_max9485_clk(MAX9485_MCLK_FREQ_122880);
+		clk = 12288000;
+		break;
+	case 11025:
+	case 22050:
+	case 44100:
+	case 88200:
+		set_max9485_clk(MAX9485_MCLK_FREQ_112896);
+		clk = 11289600;
+		break;
+	}
+
+	fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF;
+
+	/* setup the CODEC DAI */
+	ret = snd_soc_dai_set_fmt(codec_dai, fmt | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* setup the CPU DAI */
+	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, clk);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_fmt(cpu_dai, fmt | SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_DIV_SCR, 4);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_EXT, 0, 1);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops raumfeld_ak4104_ops = {
+	.hw_params = raumfeld_ak4104_hw_params,
+};
+
+static struct snd_soc_dai_link raumfeld_spdif_dai = {
+	.name		= "ak4104",
+	.stream_name	= "Playback",
+	.cpu_dai	= &pxa_ssp_dai[PXA_DAI_SSP2],
+	.codec_dai	= &ak4104_dai,
+	.ops		= &raumfeld_ak4104_ops,
+};
+
+static struct snd_soc_card snd_soc_spdif_raumfeld = {
+	.name		= "Raumfeld S/PDIF",
+	.platform	= &pxa2xx_soc_platform,
+	.dai_link	= &raumfeld_spdif_dai,
+	.num_links	= 1
+};
+
+/* raumfeld_audio audio subsystem */
+static struct snd_soc_device raumfeld_line_devdata = {
+	.card = &snd_soc_line_raumfeld,
+	.codec_dev = &soc_codec_device_cs4270,
+};
+
+static struct snd_soc_device raumfeld_spdif_devdata = {
+	.card = &snd_soc_spdif_raumfeld,
+	.codec_dev = &soc_codec_device_ak4104,
+};
+
+static struct platform_device *raumfeld_audio_line_device;
+static struct platform_device *raumfeld_audio_spdif_device;
+
+static int __init raumfeld_audio_init(void)
+{
+	int ret;
+
+	if (!machine_is_raumfeld_speaker() &&
+	    !machine_is_raumfeld_connector())
+		return 0;
+
+	max9486_client = i2c_new_device(i2c_get_adapter(0),
+					&max9486_hwmon_info);
+
+	if (!max9486_client)
+		return -ENOMEM;
+
+	set_max9485_clk(MAX9485_MCLK_FREQ_122880);
+
+	/* LINE */
+	raumfeld_audio_line_device = platform_device_alloc("soc-audio", 0);
+	if (!raumfeld_audio_line_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(raumfeld_audio_line_device,
+			     &raumfeld_line_devdata);
+	raumfeld_line_devdata.dev = &raumfeld_audio_line_device->dev;
+	ret = platform_device_add(raumfeld_audio_line_device);
+	if (ret)
+		platform_device_put(raumfeld_audio_line_device);
+
+	/* no S/PDIF on Speakers */
+	if (machine_is_raumfeld_speaker())
+		return ret;
+
+	/* S/PDIF */
+	raumfeld_audio_spdif_device = platform_device_alloc("soc-audio", 1);
+	if (!raumfeld_audio_spdif_device) {
+		platform_device_put(raumfeld_audio_line_device);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(raumfeld_audio_spdif_device,
+			     &raumfeld_spdif_devdata);
+	raumfeld_spdif_devdata.dev = &raumfeld_audio_spdif_device->dev;
+	ret = platform_device_add(raumfeld_audio_spdif_device);
+	if (ret) {
+		platform_device_put(raumfeld_audio_line_device);
+		platform_device_put(raumfeld_audio_spdif_device);
+	}
+
+	raumfeld_enable_audio(true);
+
+	return ret;
+}
+
+static void __exit raumfeld_audio_exit(void)
+{
+	raumfeld_enable_audio(false);
+
+	platform_device_unregister(raumfeld_audio_line_device);
+
+	if (machine_is_raumfeld_connector())
+		platform_device_unregister(raumfeld_audio_spdif_device);
+
+	i2c_unregister_device(max9486_client);
+
+	gpio_free(GPIO_MCLK_RESET);
+	gpio_free(GPIO_CODEC_RESET);
+	gpio_free(GPIO_SPDIF_RESET);
+}
+
+module_init(raumfeld_audio_init);
+module_exit(raumfeld_audio_exit);
+
+/* Module information */
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("Raumfeld audio SoC");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index 9a386b4..dd678ae 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -74,7 +74,8 @@
 static int zylonite_wm9713_init(struct snd_soc_codec *codec)
 {
 	if (clk_pout)
-		snd_soc_dai_set_pll(&codec->dai[0], 0, clk_get_rate(pout), 0);
+		snd_soc_dai_set_pll(&codec->dai[0], 0, 0,
+				    clk_get_rate(pout), 0);
 
 	snd_soc_dapm_new_controls(codec, zylonite_dapm_widgets,
 				  ARRAY_SIZE(zylonite_dapm_widgets));
@@ -128,7 +129,7 @@
 	if (ret < 0)
 		return ret;
 
-	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, pll_out);
+	ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, pll_out);
 	if (ret < 0)
 		return ret;
 
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 923428f..b489f1a 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -24,6 +24,9 @@
 	select SND_S3C_I2SV2_SOC
 	select S3C64XX_DMA
 
+config SND_S3C_SOC_PCM
+	tristate
+
 config SND_S3C2443_SOC_AC97
 	tristate
 	select S3C2410_DMA
@@ -56,6 +59,15 @@
 	help
 	  Sat Y if you want to add support for SoC audio on the Jive.
 
+config SND_S3C64XX_SOC_WM8580
+	tristate "SoC I2S Audio support for WM8580 on SMDK64XX"
+	depends on SND_S3C24XX_SOC && (MACH_SMDK6400 || MACH_SMDK6410)
+	depends on BROKEN
+	select SND_SOC_WM8580
+	select SND_S3C64XX_SOC_I2S
+	help
+	  Sat Y if you want to add support for SoC audio on the SMDK64XX.
+
 config SND_S3C24XX_SOC_SMDK2443_WM9710
 	tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
 	depends on SND_S3C24XX_SOC && MACH_SMDK2443
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 99f5a7d..b744657 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -1,10 +1,11 @@
 # S3c24XX Platform Support
-snd-soc-s3c24xx-objs := s3c24xx-pcm.o
+snd-soc-s3c24xx-objs := s3c-dma.o
 snd-soc-s3c24xx-i2s-objs := s3c24xx-i2s.o
 snd-soc-s3c2412-i2s-objs := s3c2412-i2s.o
 snd-soc-s3c64xx-i2s-objs := s3c64xx-i2s.o
 snd-soc-s3c2443-ac97-objs := s3c2443-ac97.o
 snd-soc-s3c-i2s-v2-objs := s3c-i2s-v2.o
+snd-soc-s3c-pcm-objs := s3c-pcm.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC) += snd-soc-s3c24xx.o
 obj-$(CONFIG_SND_S3C24XX_SOC_I2S) += snd-soc-s3c24xx-i2s.o
@@ -12,6 +13,7 @@
 obj-$(CONFIG_SND_S3C2412_SOC_I2S) += snd-soc-s3c2412-i2s.o
 obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += snd-soc-s3c64xx-i2s.o
 obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
+obj-$(CONFIG_SND_S3C_SOC_PCM) += snd-soc-s3c-pcm.o
 
 # S3C24XX Machine Support
 snd-soc-jive-wm8750-objs := jive_wm8750.o
@@ -23,6 +25,7 @@
 snd-soc-s3c24xx-simtec-objs := s3c24xx_simtec.o
 snd-soc-s3c24xx-simtec-hermes-objs := s3c24xx_simtec_hermes.o
 snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
+snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o
 
 obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -33,4 +36,5 @@
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC) += snd-soc-s3c24xx-simtec.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_HERMES) += snd-soc-s3c24xx-simtec-hermes.o
 obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv320aic23.o
+obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o
 
diff --git a/sound/soc/s3c24xx/jive_wm8750.c b/sound/soc/s3c24xx/jive_wm8750.c
index 93e6c87..59dc2c6 100644
--- a/sound/soc/s3c24xx/jive_wm8750.c
+++ b/sound/soc/s3c24xx/jive_wm8750.c
@@ -25,7 +25,7 @@
 
 #include <asm/mach-types.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c2412-i2s.h"
 
 #include "../codecs/wm8750.h"
diff --git a/sound/soc/s3c24xx/ln2440sbc_alc650.c b/sound/soc/s3c24xx/ln2440sbc_alc650.c
index 12c7148..d00d359 100644
--- a/sound/soc/s3c24xx/ln2440sbc_alc650.c
+++ b/sound/soc/s3c24xx/ln2440sbc_alc650.c
@@ -24,7 +24,7 @@
 #include <sound/soc-dapm.h>
 
 #include "../codecs/ac97.h"
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-ac97.h"
 
 static struct snd_soc_card ln2440sbc;
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
index 0c52e36..dea83d3 100644
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
@@ -32,7 +32,7 @@
 #include <asm/io.h>
 #include <mach/gta02.h>
 #include "../codecs/wm8753.h"
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 
 static struct snd_soc_card neo1973_gta02;
@@ -119,7 +119,7 @@
 		return ret;
 
 	/* codec PLL input is PCLK/4 */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
 		iis_clkrate / 4, pll_out);
 	if (ret < 0)
 		return ret;
@@ -133,7 +133,7 @@
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 
 	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
 }
 
 /*
@@ -183,7 +183,7 @@
 		return ret;
 
 	/* configue and enable PLL for 12.288MHz output */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
 		iis_clkrate / 4, 12288000);
 	if (ret < 0)
 		return ret;
@@ -197,7 +197,7 @@
 	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
 
 	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
 }
 
 static struct snd_soc_ops neo1973_gta02_voice_ops = {
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 906709e..0cb4f86 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -29,7 +29,6 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
-#include <plat/audio.h>
 #include <linux/io.h>
 #include <mach/spi-gpio.h>
 
@@ -37,7 +36,7 @@
 
 #include "../codecs/wm8753.h"
 #include "lm4857.h"
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 
 /* define the scenarios */
@@ -137,7 +136,7 @@
 		return ret;
 
 	/* codec PLL input is PCLK/4 */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0,
 		iis_clkrate / 4, pll_out);
 	if (ret < 0)
 		return ret;
@@ -153,7 +152,7 @@
 	pr_debug("Entered %s\n", __func__);
 
 	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0, 0);
 }
 
 /*
@@ -203,7 +202,7 @@
 		return ret;
 
 	/* configue and enable PLL for 12.288MHz output */
-	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
+	ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0,
 		iis_clkrate / 4, 12288000);
 	if (ret < 0)
 		return ret;
@@ -219,7 +218,7 @@
 	pr_debug("Entered %s\n", __func__);
 
 	/* disable the PLL */
-	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
+	return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0, 0);
 }
 
 static struct snd_soc_ops neo1973_voice_ops = {
diff --git a/sound/soc/s3c24xx/s3c-dma.c b/sound/soc/s3c24xx/s3c-dma.c
new file mode 100644
index 0000000..7725e26
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c-dma.c
@@ -0,0 +1,481 @@
+/*
+ * s3c-dma.c  --  ALSA Soc Audio Layer
+ *
+ * (c) 2006 Wolfson Microelectronics PLC.
+ * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ * Copyright 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/dma.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+#include "s3c-dma.h"
+
+static const struct snd_pcm_hardware s3c_dma_hardware = {
+	.info			= SNDRV_PCM_INFO_INTERLEAVED |
+				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
+				    SNDRV_PCM_INFO_MMAP |
+				    SNDRV_PCM_INFO_MMAP_VALID |
+				    SNDRV_PCM_INFO_PAUSE |
+				    SNDRV_PCM_INFO_RESUME,
+	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
+				    SNDRV_PCM_FMTBIT_U16_LE |
+				    SNDRV_PCM_FMTBIT_U8 |
+				    SNDRV_PCM_FMTBIT_S8,
+	.channels_min		= 2,
+	.channels_max		= 2,
+	.buffer_bytes_max	= 128*1024,
+	.period_bytes_min	= PAGE_SIZE,
+	.period_bytes_max	= PAGE_SIZE*2,
+	.periods_min		= 2,
+	.periods_max		= 128,
+	.fifo_size		= 32,
+};
+
+struct s3c24xx_runtime_data {
+	spinlock_t lock;
+	int state;
+	unsigned int dma_loaded;
+	unsigned int dma_limit;
+	unsigned int dma_period;
+	dma_addr_t dma_start;
+	dma_addr_t dma_pos;
+	dma_addr_t dma_end;
+	struct s3c_dma_params *params;
+};
+
+/* s3c_dma_enqueue
+ *
+ * place a dma buffer onto the queue for the dma system
+ * to handle.
+*/
+static void s3c_dma_enqueue(struct snd_pcm_substream *substream)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	dma_addr_t pos = prtd->dma_pos;
+	unsigned int limit;
+	int ret;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (s3c_dma_has_circular())
+		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
+	else
+		limit = prtd->dma_limit;
+
+	pr_debug("%s: loaded %d, limit %d\n",
+				__func__, prtd->dma_loaded, limit);
+
+	while (prtd->dma_loaded < limit) {
+		unsigned long len = prtd->dma_period;
+
+		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
+
+		if ((pos + len) > prtd->dma_end) {
+			len  = prtd->dma_end - pos;
+			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
+			       __func__, len);
+		}
+
+		ret = s3c2410_dma_enqueue(prtd->params->channel,
+			substream, pos, len);
+
+		if (ret == 0) {
+			prtd->dma_loaded++;
+			pos += prtd->dma_period;
+			if (pos >= prtd->dma_end)
+				pos = prtd->dma_start;
+		} else
+			break;
+	}
+
+	prtd->dma_pos = pos;
+}
+
+static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
+				void *dev_id, int size,
+				enum s3c2410_dma_buffresult result)
+{
+	struct snd_pcm_substream *substream = dev_id;
+	struct s3c24xx_runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
+		return;
+
+	prtd = substream->runtime->private_data;
+
+	if (substream)
+		snd_pcm_period_elapsed(substream);
+
+	spin_lock(&prtd->lock);
+	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
+		prtd->dma_loaded--;
+		s3c_dma_enqueue(substream);
+	}
+
+	spin_unlock(&prtd->lock);
+}
+
+static int s3c_dma_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_dma_params *dma = rtd->dai->cpu_dai->dma_data;
+	unsigned long totbytes = params_buffer_bytes(params);
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!dma)
+		return 0;
+
+	/* this may get called several times by oss emulation
+	 * with different params -HW */
+	if (prtd->params == NULL) {
+		/* prepare DMA */
+		prtd->params = dma;
+
+		pr_debug("params %p, client %p, channel %d\n", prtd->params,
+			prtd->params->client, prtd->params->channel);
+
+		ret = s3c2410_dma_request(prtd->params->channel,
+					  prtd->params->client, NULL);
+
+		if (ret < 0) {
+			printk(KERN_ERR "failed to get dma channel\n");
+			return ret;
+		}
+
+		/* use the circular buffering if we have it available. */
+		if (s3c_dma_has_circular())
+			s3c2410_dma_setflags(prtd->params->channel,
+					     S3C2410_DMAF_CIRCULAR);
+	}
+
+	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
+				    s3c24xx_audio_buffdone);
+
+	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+
+	runtime->dma_bytes = totbytes;
+
+	spin_lock_irq(&prtd->lock);
+	prtd->dma_loaded = 0;
+	prtd->dma_limit = runtime->hw.periods_min;
+	prtd->dma_period = params_period_bytes(params);
+	prtd->dma_start = runtime->dma_addr;
+	prtd->dma_pos = prtd->dma_start;
+	prtd->dma_end = prtd->dma_start + totbytes;
+	spin_unlock_irq(&prtd->lock);
+
+	return 0;
+}
+
+static int s3c_dma_hw_free(struct snd_pcm_substream *substream)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* TODO - do we need to ensure DMA flushed */
+	snd_pcm_set_runtime_buffer(substream, NULL);
+
+	if (prtd->params) {
+		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
+		prtd->params = NULL;
+	}
+
+	return 0;
+}
+
+static int s3c_dma_prepare(struct snd_pcm_substream *substream)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	/* return if this is a bufferless transfer e.g.
+	 * codec <--> BT codec or GSM modem -- lg FIXME */
+	if (!prtd->params)
+		return 0;
+
+	/* channel needs configuring for mem=>device, increment memory addr,
+	 * sync to pclk, half-word transfers to the IIS-FIFO. */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		s3c2410_dma_devconfig(prtd->params->channel,
+				      S3C2410_DMASRC_MEM,
+				      prtd->params->dma_addr);
+	} else {
+		s3c2410_dma_devconfig(prtd->params->channel,
+				      S3C2410_DMASRC_HW,
+				      prtd->params->dma_addr);
+	}
+
+	s3c2410_dma_config(prtd->params->channel,
+			   prtd->params->dma_size);
+
+	/* flush the DMA channel */
+	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
+	prtd->dma_loaded = 0;
+	prtd->dma_pos = prtd->dma_start;
+
+	/* enqueue dma buffers */
+	s3c_dma_enqueue(substream);
+
+	return ret;
+}
+
+static int s3c_dma_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		prtd->state |= ST_RUNNING;
+		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		prtd->state &= ~ST_RUNNING;
+		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock(&prtd->lock);
+
+	return ret;
+}
+
+static snd_pcm_uframes_t
+s3c_dma_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+	unsigned long res;
+	dma_addr_t src, dst;
+
+	pr_debug("Entered %s\n", __func__);
+
+	spin_lock(&prtd->lock);
+	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
+
+	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+		res = dst - prtd->dma_start;
+	else
+		res = src - prtd->dma_start;
+
+	spin_unlock(&prtd->lock);
+
+	pr_debug("Pointer %x %x\n", src, dst);
+
+	/* we seem to be getting the odd error from the pcm library due
+	 * to out-of-bounds pointers. this is maybe due to the dma engine
+	 * not having loaded the new values for the channel before being
+	 * callled... (todo - fix )
+	 */
+
+	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
+		if (res == snd_pcm_lib_buffer_bytes(substream))
+			res = 0;
+	}
+
+	return bytes_to_frames(substream->runtime, res);
+}
+
+static int s3c_dma_open(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd;
+
+	pr_debug("Entered %s\n", __func__);
+
+	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
+	snd_soc_set_runtime_hwparams(substream, &s3c_dma_hardware);
+
+	prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
+	if (prtd == NULL)
+		return -ENOMEM;
+
+	spin_lock_init(&prtd->lock);
+
+	runtime->private_data = prtd;
+	return 0;
+}
+
+static int s3c_dma_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct s3c24xx_runtime_data *prtd = runtime->private_data;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!prtd)
+		pr_debug("s3c_dma_close called with prtd == NULL\n");
+
+	kfree(prtd);
+
+	return 0;
+}
+
+static int s3c_dma_mmap(struct snd_pcm_substream *substream,
+	struct vm_area_struct *vma)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+
+	pr_debug("Entered %s\n", __func__);
+
+	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
+				     runtime->dma_area,
+				     runtime->dma_addr,
+				     runtime->dma_bytes);
+}
+
+static struct snd_pcm_ops s3c_dma_ops = {
+	.open		= s3c_dma_open,
+	.close		= s3c_dma_close,
+	.ioctl		= snd_pcm_lib_ioctl,
+	.hw_params	= s3c_dma_hw_params,
+	.hw_free	= s3c_dma_hw_free,
+	.prepare	= s3c_dma_prepare,
+	.trigger	= s3c_dma_trigger,
+	.pointer	= s3c_dma_pointer,
+	.mmap		= s3c_dma_mmap,
+};
+
+static int s3c_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+{
+	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+	struct snd_dma_buffer *buf = &substream->dma_buffer;
+	size_t size = s3c_dma_hardware.buffer_bytes_max;
+
+	pr_debug("Entered %s\n", __func__);
+
+	buf->dev.type = SNDRV_DMA_TYPE_DEV;
+	buf->dev.dev = pcm->card->dev;
+	buf->private_data = NULL;
+	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
+					   &buf->addr, GFP_KERNEL);
+	if (!buf->area)
+		return -ENOMEM;
+	buf->bytes = size;
+	return 0;
+}
+
+static void s3c_dma_free_dma_buffers(struct snd_pcm *pcm)
+{
+	struct snd_pcm_substream *substream;
+	struct snd_dma_buffer *buf;
+	int stream;
+
+	pr_debug("Entered %s\n", __func__);
+
+	for (stream = 0; stream < 2; stream++) {
+		substream = pcm->streams[stream].substream;
+		if (!substream)
+			continue;
+
+		buf = &substream->dma_buffer;
+		if (!buf->area)
+			continue;
+
+		dma_free_writecombine(pcm->card->dev, buf->bytes,
+				      buf->area, buf->addr);
+		buf->area = NULL;
+	}
+}
+
+static u64 s3c_dma_mask = DMA_BIT_MASK(32);
+
+static int s3c_dma_new(struct snd_card *card,
+	struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+	int ret = 0;
+
+	pr_debug("Entered %s\n", __func__);
+
+	if (!card->dev->dma_mask)
+		card->dev->dma_mask = &s3c_dma_mask;
+	if (!card->dev->coherent_dma_mask)
+		card->dev->coherent_dma_mask = 0xffffffff;
+
+	if (dai->playback.channels_min) {
+		ret = s3c_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_PLAYBACK);
+		if (ret)
+			goto out;
+	}
+
+	if (dai->capture.channels_min) {
+		ret = s3c_preallocate_dma_buffer(pcm,
+			SNDRV_PCM_STREAM_CAPTURE);
+		if (ret)
+			goto out;
+	}
+ out:
+	return ret;
+}
+
+struct snd_soc_platform s3c24xx_soc_platform = {
+	.name		= "s3c24xx-audio",
+	.pcm_ops 	= &s3c_dma_ops,
+	.pcm_new	= s3c_dma_new,
+	.pcm_free	= s3c_dma_free_dma_buffers,
+};
+EXPORT_SYMBOL_GPL(s3c24xx_soc_platform);
+
+static int __init s3c24xx_soc_platform_init(void)
+{
+	return snd_soc_register_platform(&s3c24xx_soc_platform);
+}
+module_init(s3c24xx_soc_platform_init);
+
+static void __exit s3c24xx_soc_platform_exit(void)
+{
+	snd_soc_unregister_platform(&s3c24xx_soc_platform);
+}
+module_exit(s3c24xx_soc_platform_exit);
+
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C Audio DMA module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c-dma.h b/sound/soc/s3c24xx/s3c-dma.h
new file mode 100644
index 0000000..69bb6bf
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c-dma.h
@@ -0,0 +1,31 @@
+/*
+ *  s3c-dma.h --
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  ALSA PCM interface for the Samsung S3C24xx CPU
+ */
+
+#ifndef _S3C_AUDIO_H
+#define _S3C_AUDIO_H
+
+#define ST_RUNNING		(1<<0)
+#define ST_OPENED		(1<<1)
+
+struct s3c_dma_params {
+	struct s3c2410_dma_client *client;	/* stream identifier */
+	int channel;				/* Channel ID */
+	dma_addr_t dma_addr;
+	int dma_size;			/* Size of the DMA transfer */
+};
+
+#define S3C24XX_DAI_I2S			0
+
+/* platform data */
+extern struct snd_soc_platform s3c24xx_soc_platform;
+extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
+
+#endif
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.c b/sound/soc/s3c24xx/s3c-i2s-v2.c
index 9bc4aa3..e994d83 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.c
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.c
@@ -32,11 +32,10 @@
 
 #include <plat/regs-s3c2412-iis.h>
 
-#include <plat/audio.h>
 #include <mach/dma.h>
 
 #include "s3c-i2s-v2.h"
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 
 #undef S3C_IIS_V2_SUPPORTED
 
@@ -312,12 +311,15 @@
 
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_RIGHT_J:
+		iismod |= S3C2412_IISMOD_LR_RLOW;
 		iismod |= S3C2412_IISMOD_SDF_MSB;
 		break;
 	case SND_SOC_DAIFMT_LEFT_J:
+		iismod |= S3C2412_IISMOD_LR_RLOW;
 		iismod |= S3C2412_IISMOD_SDF_LSB;
 		break;
 	case SND_SOC_DAIFMT_I2S:
+		iismod &= ~S3C2412_IISMOD_LR_RLOW;
 		iismod |= S3C2412_IISMOD_SDF_IIS;
 		break;
 	default:
@@ -392,7 +394,7 @@
 	int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
 	unsigned long irqs;
 	int ret = 0;
-	int channel = ((struct s3c24xx_pcm_dma_params *)
+	int channel = ((struct s3c_dma_params *)
 		  rtd->dai->cpu_dai->dma_data)->channel;
 
 	pr_debug("Entered %s\n", __func__);
@@ -467,6 +469,31 @@
 
 	switch (div_id) {
 	case S3C_I2SV2_DIV_BCLK:
+		if (div > 3) {
+			/* convert value to bit field */
+
+			switch (div) {
+			case 16:
+				div = S3C2412_IISMOD_BCLK_16FS;
+				break;
+
+			case 32:
+				div = S3C2412_IISMOD_BCLK_32FS;
+				break;
+
+			case 24:
+				div = S3C2412_IISMOD_BCLK_24FS;
+				break;
+
+			case 48:
+				div = S3C2412_IISMOD_BCLK_48FS;
+				break;
+
+			default:
+				return -EINVAL;
+			}
+		}
+
 		reg = readl(i2s->regs + S3C2412_IISMOD);
 		reg &= ~S3C2412_IISMOD_BCLK_MASK;
 		writel(reg | div, i2s->regs + S3C2412_IISMOD);
@@ -626,7 +653,7 @@
 	}
 
 	i2s->iis_pclk = clk_get(dev, "iis");
-	if (i2s->iis_pclk == NULL) {
+	if (IS_ERR(i2s->iis_pclk)) {
 		dev_err(dev, "failed to get iis_clock\n");
 		iounmap(i2s->regs);
 		return -ENOENT;
diff --git a/sound/soc/s3c24xx/s3c-i2s-v2.h b/sound/soc/s3c24xx/s3c-i2s-v2.h
index f66854a..ecf8eaa 100644
--- a/sound/soc/s3c24xx/s3c-i2s-v2.h
+++ b/sound/soc/s3c24xx/s3c-i2s-v2.h
@@ -49,8 +49,8 @@
 
 	unsigned char	 master;
 
-	struct s3c24xx_pcm_dma_params	*dma_playback;
-	struct s3c24xx_pcm_dma_params	*dma_capture;
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
 
 	u32		 suspend_iismod;
 	u32		 suspend_iiscon;
diff --git a/sound/soc/s3c24xx/s3c-pcm.c b/sound/soc/s3c24xx/s3c-pcm.c
new file mode 100644
index 0000000..9e61a7c
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c-pcm.c
@@ -0,0 +1,552 @@
+/* sound/soc/s3c24xx/s3c-pcm.c
+ *
+ * ALSA SoC Audio Layer - S3C PCM-Controller driver
+ *
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
+ * based upon I2S drivers by Ben Dooks.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <plat/audio.h>
+#include <plat/dma.h>
+
+#include "s3c-dma.h"
+#include "s3c-pcm.h"
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_out = {
+	.name		= "PCM Stereo out"
+};
+
+static struct s3c2410_dma_client s3c_pcm_dma_client_in = {
+	.name		= "PCM Stereo in"
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_out[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_out,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_dma_params s3c_pcm_stereo_in[] = {
+	[0] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+	[1] = {
+		.client		= &s3c_pcm_dma_client_in,
+		.dma_size	= 4,
+	},
+};
+
+static struct s3c_pcm_info s3c_pcm[2];
+
+static inline struct s3c_pcm_info *to_info(struct snd_soc_dai *cpu_dai)
+{
+	return cpu_dai->private_data;
+}
+
+static void s3c_pcm_snd_txctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	ctl = readl(regs + S3C_PCM_CTL);
+	ctl &= ~(S3C_PCM_CTL_TXDIPSTICK_MASK
+			 << S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_TXDMA_EN;
+		ctl |= S3C_PCM_CTL_TXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		ctl |= (0x20<<S3C_PCM_CTL_TXDIPSTICK_SHIFT);
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_TXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_TXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_RXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static void s3c_pcm_snd_rxctrl(struct s3c_pcm_info *pcm, int on)
+{
+	void __iomem *regs = pcm->regs;
+	u32 ctl, clkctl;
+
+	ctl = readl(regs + S3C_PCM_CTL);
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+
+	if (on) {
+		ctl |= S3C_PCM_CTL_RXDMA_EN;
+		ctl |= S3C_PCM_CTL_RXFIFO_EN;
+		ctl |= S3C_PCM_CTL_ENABLE;
+		clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+	} else {
+		ctl &= ~S3C_PCM_CTL_RXDMA_EN;
+		ctl &= ~S3C_PCM_CTL_RXFIFO_EN;
+
+		if (!(ctl & S3C_PCM_CTL_TXFIFO_EN)) {
+			ctl &= ~S3C_PCM_CTL_ENABLE;
+			if (!pcm->idleclk)
+				clkctl |= S3C_PCM_CLKCTL_SERCLK_EN;
+		}
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+	writel(ctl, regs + S3C_PCM_CTL);
+}
+
+static int s3c_pcm_trigger(struct snd_pcm_substream *substream, int cmd,
+			       struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct s3c_pcm_info *pcm = to_info(rtd->dai->cpu_dai);
+	unsigned long flags;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 1);
+		else
+			s3c_pcm_snd_txctrl(pcm, 1);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		spin_lock_irqsave(&pcm->lock, flags);
+
+		if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+			s3c_pcm_snd_rxctrl(pcm, 0);
+		else
+			s3c_pcm_snd_txctrl(pcm, 0);
+
+		spin_unlock_irqrestore(&pcm->lock, flags);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_hw_params(struct snd_pcm_substream *substream,
+				 struct snd_pcm_hw_params *params,
+				 struct snd_soc_dai *socdai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai_link *dai = rtd->dai;
+	struct s3c_pcm_info *pcm = to_info(dai->cpu_dai);
+	void __iomem *regs = pcm->regs;
+	struct clk *clk;
+	int sclk_div, sync_div;
+	unsigned long flags;
+	u32 clkctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dai->cpu_dai->dma_data = pcm->dma_playback;
+	else
+		dai->cpu_dai->dma_data = pcm->dma_capture;
+
+	/* Strictly check for sample size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	/* Get hold of the PCMSOURCE_CLK */
+	clkctl = readl(regs + S3C_PCM_CLKCTL);
+	if (clkctl & S3C_PCM_CLKCTL_SERCLKSEL_PCLK)
+		clk = pcm->pclk;
+	else
+		clk = pcm->cclk;
+
+	/* Set the SCLK divider */
+	sclk_div = clk_get_rate(clk) / pcm->sclk_per_fs /
+					params_rate(params) / 2 - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SCLKDIV_MASK
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+	clkctl |= ((sclk_div & S3C_PCM_CLKCTL_SCLKDIV_MASK)
+			<< S3C_PCM_CLKCTL_SCLKDIV_SHIFT);
+
+	/* Set the SYNC divider */
+	sync_div = pcm->sclk_per_fs - 1;
+
+	clkctl &= ~(S3C_PCM_CLKCTL_SYNCDIV_MASK
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+	clkctl |= ((sync_div & S3C_PCM_CLKCTL_SYNCDIV_MASK)
+				<< S3C_PCM_CLKCTL_SYNCDIV_SHIFT);
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	dev_dbg(pcm->dev, "PCMSOURCE_CLK-%lu SCLK=%ufs \
+				SCLK_DIV=%d SYNC_DIV=%d\n",
+				clk_get_rate(clk), pcm->sclk_per_fs,
+				sclk_div, sync_div);
+
+	return 0;
+}
+
+static int s3c_pcm_set_fmt(struct snd_soc_dai *cpu_dai,
+			       unsigned int fmt)
+{
+	struct s3c_pcm_info *pcm = to_info(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	unsigned long flags;
+	int ret = 0;
+	u32 ctl;
+
+	dev_dbg(pcm->dev, "Entered %s\n", __func__);
+
+	spin_lock_irqsave(&pcm->lock, flags);
+
+	ctl = readl(regs + S3C_PCM_CTL);
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		/* Nothing to do, NB_NF by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported clock inversion!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Nothing to do, Master by default */
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported master/slave format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_CLOCK_MASK) {
+	case SND_SOC_DAIFMT_CONT:
+		pcm->idleclk = 1;
+		break;
+	case SND_SOC_DAIFMT_GATED:
+		pcm->idleclk = 0;
+		break;
+	default:
+		dev_err(pcm->dev, "Invalid Clock gating request!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+		ctl |= S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl |= S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctl &= ~S3C_PCM_CTL_TXMSB_AFTER_FSYNC;
+		ctl &= ~S3C_PCM_CTL_RXMSB_AFTER_FSYNC;
+		break;
+	default:
+		dev_err(pcm->dev, "Unsupported data format!\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	writel(ctl, regs + S3C_PCM_CTL);
+
+exit:
+	spin_unlock_irqrestore(&pcm->lock, flags);
+
+	return ret;
+}
+
+static int s3c_pcm_set_clkdiv(struct snd_soc_dai *cpu_dai,
+						int div_id, int div)
+{
+	struct s3c_pcm_info *pcm = to_info(cpu_dai);
+
+	switch (div_id) {
+	case S3C_PCM_SCLK_PER_FS:
+		pcm->sclk_per_fs = div;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3c_pcm_set_sysclk(struct snd_soc_dai *cpu_dai,
+				  int clk_id, unsigned int freq, int dir)
+{
+	struct s3c_pcm_info *pcm = to_info(cpu_dai);
+	void __iomem *regs = pcm->regs;
+	u32 clkctl = readl(regs + S3C_PCM_CLKCTL);
+
+	switch (clk_id) {
+	case S3C_PCM_CLKSRC_PCLK:
+		clkctl |= S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+		break;
+
+	case S3C_PCM_CLKSRC_MUX:
+		clkctl &= ~S3C_PCM_CLKCTL_SERCLKSEL_PCLK;
+
+		if (clk_get_rate(pcm->cclk) != freq)
+			clk_set_rate(pcm->cclk, freq);
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	writel(clkctl, regs + S3C_PCM_CLKCTL);
+
+	return 0;
+}
+
+static struct snd_soc_dai_ops s3c_pcm_dai_ops = {
+	.set_sysclk	= s3c_pcm_set_sysclk,
+	.set_clkdiv	= s3c_pcm_set_clkdiv,
+	.trigger	= s3c_pcm_trigger,
+	.hw_params	= s3c_pcm_hw_params,
+	.set_fmt	= s3c_pcm_set_fmt,
+};
+
+#define S3C_PCM_RATES  SNDRV_PCM_RATE_8000_96000
+
+#define S3C_PCM_DECLARE(n)			\
+{								\
+	.name		 = "samsung-pcm",			\
+	.id		 = (n),				\
+	.symmetric_rates = 1,					\
+	.ops = &s3c_pcm_dai_ops,				\
+	.playback = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	},							\
+	.capture = {						\
+		.channels_min	= 2,				\
+		.channels_max	= 2,				\
+		.rates		= S3C_PCM_RATES,		\
+		.formats	= SNDRV_PCM_FMTBIT_S16_LE,	\
+	},							\
+}
+
+struct snd_soc_dai s3c_pcm_dai[] = {
+	S3C_PCM_DECLARE(0),
+	S3C_PCM_DECLARE(1),
+};
+EXPORT_SYMBOL_GPL(s3c_pcm_dai);
+
+static __devinit int s3c_pcm_dev_probe(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm;
+	struct snd_soc_dai *dai;
+	struct resource *mem_res, *dmatx_res, *dmarx_res;
+	struct s3c_audio_pdata *pcm_pdata;
+	int ret;
+
+	/* Check for valid device index */
+	if ((pdev->id < 0) || pdev->id >= ARRAY_SIZE(s3c_pcm)) {
+		dev_err(&pdev->dev, "id %d out of range\n", pdev->id);
+		return -EINVAL;
+	}
+
+	pcm_pdata = pdev->dev.platform_data;
+
+	/* Check for availability of necessary resource */
+	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (!dmatx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-TX dma resource\n");
+		return -ENXIO;
+	}
+
+	dmarx_res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (!dmarx_res) {
+		dev_err(&pdev->dev, "Unable to get PCM-RX dma resource\n");
+		return -ENXIO;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem_res) {
+		dev_err(&pdev->dev, "Unable to get register resource\n");
+		return -ENXIO;
+	}
+
+	if (pcm_pdata && pcm_pdata->cfg_gpio && pcm_pdata->cfg_gpio(pdev)) {
+		dev_err(&pdev->dev, "Unable to configure gpio\n");
+		return -EINVAL;
+	}
+
+	pcm = &s3c_pcm[pdev->id];
+	pcm->dev = &pdev->dev;
+
+	spin_lock_init(&pcm->lock);
+
+	dai = &s3c_pcm_dai[pdev->id];
+	dai->dev = &pdev->dev;
+
+	/* Default is 128fs */
+	pcm->sclk_per_fs = 128;
+
+	pcm->cclk = clk_get(&pdev->dev, "audio-bus");
+	if (IS_ERR(pcm->cclk)) {
+		dev_err(&pdev->dev, "failed to get audio-bus\n");
+		ret = PTR_ERR(pcm->cclk);
+		goto err1;
+	}
+	clk_enable(pcm->cclk);
+
+	/* record our pcm structure for later use in the callbacks */
+	dai->private_data = pcm;
+
+	if (!request_mem_region(mem_res->start,
+				resource_size(mem_res), "samsung-pcm")) {
+		dev_err(&pdev->dev, "Unable to request register region\n");
+		ret = -EBUSY;
+		goto err2;
+	}
+
+	pcm->regs = ioremap(mem_res->start, 0x100);
+	if (pcm->regs == NULL) {
+		dev_err(&pdev->dev, "cannot ioremap registers\n");
+		ret = -ENXIO;
+		goto err3;
+	}
+
+	pcm->pclk = clk_get(&pdev->dev, "pcm");
+	if (IS_ERR(pcm->pclk)) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		ret = -ENOENT;
+		goto err4;
+	}
+	clk_enable(pcm->pclk);
+
+	ret = snd_soc_register_dai(dai);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to get pcm_clock\n");
+		goto err5;
+	}
+
+	s3c_pcm_stereo_in[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_RXFIFO;
+	s3c_pcm_stereo_out[pdev->id].dma_addr = mem_res->start
+							+ S3C_PCM_TXFIFO;
+
+	s3c_pcm_stereo_in[pdev->id].channel = dmarx_res->start;
+	s3c_pcm_stereo_out[pdev->id].channel = dmatx_res->start;
+
+	pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id];
+	pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id];
+
+	return 0;
+
+err5:
+	clk_disable(pcm->pclk);
+	clk_put(pcm->pclk);
+err4:
+	iounmap(pcm->regs);
+err3:
+	release_mem_region(mem_res->start, resource_size(mem_res));
+err2:
+	clk_disable(pcm->cclk);
+	clk_put(pcm->cclk);
+err1:
+	return ret;
+}
+
+static __devexit int s3c_pcm_dev_remove(struct platform_device *pdev)
+{
+	struct s3c_pcm_info *pcm = &s3c_pcm[pdev->id];
+	struct resource *mem_res;
+
+	iounmap(pcm->regs);
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem_res->start, resource_size(mem_res));
+
+	clk_disable(pcm->cclk);
+	clk_disable(pcm->pclk);
+	clk_put(pcm->pclk);
+	clk_put(pcm->cclk);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pcm_driver = {
+	.probe  = s3c_pcm_dev_probe,
+	.remove = s3c_pcm_dev_remove,
+	.driver = {
+		.name = "samsung-pcm",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init s3c_pcm_init(void)
+{
+	return platform_driver_register(&s3c_pcm_driver);
+}
+module_init(s3c_pcm_init);
+
+static void __exit s3c_pcm_exit(void)
+{
+	platform_driver_unregister(&s3c_pcm_driver);
+}
+module_exit(s3c_pcm_exit);
+
+/* Module information */
+MODULE_AUTHOR("Jaswinder Singh, <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("S3C PCM Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c-pcm.h b/sound/soc/s3c24xx/s3c-pcm.h
new file mode 100644
index 0000000..69ff997
--- /dev/null
+++ b/sound/soc/s3c24xx/s3c-pcm.h
@@ -0,0 +1,123 @@
+/*  sound/soc/s3c24xx/s3c-pcm.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __S3C_PCM_H
+#define __S3C_PCM_H __FILE__
+
+/*Register Offsets */
+#define S3C_PCM_CTL	(0x00)
+#define S3C_PCM_CLKCTL	(0x04)
+#define S3C_PCM_TXFIFO	(0x08)
+#define S3C_PCM_RXFIFO	(0x0C)
+#define S3C_PCM_IRQCTL	(0x10)
+#define S3C_PCM_IRQSTAT	(0x14)
+#define S3C_PCM_FIFOSTAT	(0x18)
+#define S3C_PCM_CLRINT	(0x20)
+
+/* PCM_CTL Bit-Fields */
+#define S3C_PCM_CTL_TXDIPSTICK_MASK		(0x3f)
+#define S3C_PCM_CTL_TXDIPSTICK_SHIFT	(13)
+#define S3C_PCM_CTL_RXDIPSTICK_MSK		(0x3f<<7)
+#define S3C_PCM_CTL_TXDMA_EN		(0x1<<6)
+#define S3C_PCM_CTL_RXDMA_EN		(0x1<<5)
+#define S3C_PCM_CTL_TXMSB_AFTER_FSYNC	(0x1<<4)
+#define S3C_PCM_CTL_RXMSB_AFTER_FSYNC	(0x1<<3)
+#define S3C_PCM_CTL_TXFIFO_EN		(0x1<<2)
+#define S3C_PCM_CTL_RXFIFO_EN		(0x1<<1)
+#define S3C_PCM_CTL_ENABLE			(0x1<<0)
+
+/* PCM_CLKCTL Bit-Fields */
+#define S3C_PCM_CLKCTL_SERCLK_EN		(0x1<<19)
+#define S3C_PCM_CLKCTL_SERCLKSEL_PCLK	(0x1<<18)
+#define S3C_PCM_CLKCTL_SCLKDIV_MASK		(0x1ff)
+#define S3C_PCM_CLKCTL_SYNCDIV_MASK		(0x1ff)
+#define S3C_PCM_CLKCTL_SCLKDIV_SHIFT	(9)
+#define S3C_PCM_CLKCTL_SYNCDIV_SHIFT	(0)
+
+/* PCM_TXFIFO Bit-Fields */
+#define S3C_PCM_TXFIFO_DVALID	(0x1<<16)
+#define S3C_PCM_TXFIFO_DATA_MSK	(0xffff<<0)
+
+/* PCM_RXFIFO Bit-Fields */
+#define S3C_PCM_RXFIFO_DVALID	(0x1<<16)
+#define S3C_PCM_RXFIFO_DATA_MSK	(0xffff<<0)
+
+/* PCM_IRQCTL Bit-Fields */
+#define S3C_PCM_IRQCTL_IRQEN		(0x1<<14)
+#define S3C_PCM_IRQCTL_WRDEN		(0x1<<12)
+#define S3C_PCM_IRQCTL_TXEMPTYEN		(0x1<<11)
+#define S3C_PCM_IRQCTL_TXALMSTEMPTYEN	(0x1<<10)
+#define S3C_PCM_IRQCTL_TXFULLEN		(0x1<<9)
+#define S3C_PCM_IRQCTL_TXALMSTFULLEN	(0x1<<8)
+#define S3C_PCM_IRQCTL_TXSTARVEN		(0x1<<7)
+#define S3C_PCM_IRQCTL_TXERROVRFLEN		(0x1<<6)
+#define S3C_PCM_IRQCTL_RXEMPTEN		(0x1<<5)
+#define S3C_PCM_IRQCTL_RXALMSTEMPTEN	(0x1<<4)
+#define S3C_PCM_IRQCTL_RXFULLEN		(0x1<<3)
+#define S3C_PCM_IRQCTL_RXALMSTFULLEN	(0x1<<2)
+#define S3C_PCM_IRQCTL_RXSTARVEN		(0x1<<1)
+#define S3C_PCM_IRQCTL_RXERROVRFLEN		(0x1<<0)
+
+/* PCM_IRQSTAT Bit-Fields */
+#define S3C_PCM_IRQSTAT_IRQPND		(0x1<<13)
+#define S3C_PCM_IRQSTAT_WRD_XFER		(0x1<<12)
+#define S3C_PCM_IRQSTAT_TXEMPTY		(0x1<<11)
+#define S3C_PCM_IRQSTAT_TXALMSTEMPTY	(0x1<<10)
+#define S3C_PCM_IRQSTAT_TXFULL		(0x1<<9)
+#define S3C_PCM_IRQSTAT_TXALMSTFULL		(0x1<<8)
+#define S3C_PCM_IRQSTAT_TXSTARV		(0x1<<7)
+#define S3C_PCM_IRQSTAT_TXERROVRFL		(0x1<<6)
+#define S3C_PCM_IRQSTAT_RXEMPT		(0x1<<5)
+#define S3C_PCM_IRQSTAT_RXALMSTEMPT		(0x1<<4)
+#define S3C_PCM_IRQSTAT_RXFULL		(0x1<<3)
+#define S3C_PCM_IRQSTAT_RXALMSTFULL		(0x1<<2)
+#define S3C_PCM_IRQSTAT_RXSTARV		(0x1<<1)
+#define S3C_PCM_IRQSTAT_RXERROVRFL		(0x1<<0)
+
+/* PCM_FIFOSTAT Bit-Fields */
+#define S3C_PCM_FIFOSTAT_TXCNT_MSK		(0x3f<<14)
+#define S3C_PCM_FIFOSTAT_TXFIFOEMPTY	(0x1<<13)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTEMPTY	(0x1<<12)
+#define S3C_PCM_FIFOSTAT_TXFIFOFULL		(0x1<<11)
+#define S3C_PCM_FIFOSTAT_TXFIFOALMSTFULL	(0x1<<10)
+#define S3C_PCM_FIFOSTAT_RXCNT_MSK		(0x3f<<4)
+#define S3C_PCM_FIFOSTAT_RXFIFOEMPTY	(0x1<<3)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTEMPTY	(0x1<<2)
+#define S3C_PCM_FIFOSTAT_RXFIFOFULL		(0x1<<1)
+#define S3C_PCM_FIFOSTAT_RXFIFOALMSTFULL	(0x1<<0)
+
+#define S3C_PCM_CLKSRC_PCLK	0
+#define S3C_PCM_CLKSRC_MUX	1
+
+#define S3C_PCM_SCLK_PER_FS	0
+
+/**
+ * struct s3c_pcm_info - S3C PCM Controller information
+ * @dev: The parent device passed to use from the probe.
+ * @regs: The pointer to the device register block.
+ * @dma_playback: DMA information for playback channel.
+ * @dma_capture: DMA information for capture channel.
+ */
+struct s3c_pcm_info {
+	spinlock_t lock;
+	struct device	*dev;
+	void __iomem	*regs;
+
+	unsigned int sclk_per_fs;
+
+	/* Whether to keep PCMSCLK enabled even when idle(no active xfer) */
+	unsigned int idleclk;
+
+	struct clk	*pclk;
+	struct clk	*cclk;
+
+	struct s3c_dma_params	*dma_playback;
+	struct s3c_dma_params	*dma_capture;
+};
+
+#endif /* __S3C_PCM_H */
diff --git a/sound/soc/s3c24xx/s3c2412-i2s.c b/sound/soc/s3c24xx/s3c2412-i2s.c
index a587ec4..359e593 100644
--- a/sound/soc/s3c24xx/s3c2412-i2s.c
+++ b/sound/soc/s3c24xx/s3c2412-i2s.c
@@ -34,11 +34,10 @@
 
 #include <plat/regs-s3c2412-iis.h>
 
-#include <plat/audio.h>
 #include <mach/regs-gpio.h>
 #include <mach/dma.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c2412-i2s.h"
 
 #define S3C2412_I2S_DEBUG 0
@@ -51,14 +50,14 @@
 	.name		= "I2S PCM Stereo in"
 };
 
-static struct s3c24xx_pcm_dma_params s3c2412_i2s_pcm_stereo_out = {
+static struct s3c_dma_params s3c2412_i2s_pcm_stereo_out = {
 	.client		= &s3c2412_dma_client_out,
 	.channel	= DMACH_I2S_OUT,
 	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISTXD,
 	.dma_size	= 4,
 };
 
-static struct s3c24xx_pcm_dma_params s3c2412_i2s_pcm_stereo_in = {
+static struct s3c_dma_params s3c2412_i2s_pcm_stereo_in = {
 	.client		= &s3c2412_dma_client_in,
 	.channel	= DMACH_I2S_IN,
 	.dma_addr	= S3C2410_PA_IIS + S3C2412_IISRXD,
diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c
index fc1beb0..0191e3a 100644
--- a/sound/soc/s3c24xx/s3c2443-ac97.c
+++ b/sound/soc/s3c24xx/s3c2443-ac97.c
@@ -32,11 +32,10 @@
 #include <plat/regs-ac97.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/audio.h>
 #include <asm/dma.h>
 #include <mach/dma.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-ac97.h"
 
 struct s3c24xx_ac97_info {
@@ -189,21 +188,21 @@
 	.name = "AC97 Mic Mono in"
 };
 
-static struct s3c24xx_pcm_dma_params s3c2443_ac97_pcm_stereo_out = {
+static struct s3c_dma_params s3c2443_ac97_pcm_stereo_out = {
 	.client		= &s3c2443_dma_client_out,
 	.channel	= DMACH_PCM_OUT,
 	.dma_addr	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	.dma_size	= 4,
 };
 
-static struct s3c24xx_pcm_dma_params s3c2443_ac97_pcm_stereo_in = {
+static struct s3c_dma_params s3c2443_ac97_pcm_stereo_in = {
 	.client		= &s3c2443_dma_client_in,
 	.channel	= DMACH_PCM_IN,
 	.dma_addr	= S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
 	.dma_size	= 4,
 };
 
-static struct s3c24xx_pcm_dma_params s3c2443_ac97_mic_mono_in = {
+static struct s3c_dma_params s3c2443_ac97_mic_mono_in = {
 	.client		= &s3c2443_dma_client_micin,
 	.channel	= DMACH_MIC_IN,
 	.dma_addr	= S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
@@ -291,7 +290,7 @@
 {
 	u32 ac_glbctrl;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	int channel = ((struct s3c24xx_pcm_dma_params *)
+	int channel = ((struct s3c_dma_params *)
 		  rtd->dai->cpu_dai->dma_data)->channel;
 
 	ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
@@ -340,7 +339,7 @@
 {
 	u32 ac_glbctrl;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	int channel = ((struct s3c24xx_pcm_dma_params *)
+	int channel = ((struct s3c_dma_params *)
 		  rtd->dai->cpu_dai->dma_data)->channel;
 
 	ac_glbctrl = readl(s3c24xx_ac97.regs + S3C_AC97_GLBCTRL);
diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c
index 40e2c47..0bc5950 100644
--- a/sound/soc/s3c24xx/s3c24xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
@@ -32,13 +32,13 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <plat/audio.h>
+
 #include <asm/dma.h>
 #include <mach/dma.h>
 
 #include <plat/regs-iis.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 
 static struct s3c2410_dma_client s3c24xx_dma_client_out = {
@@ -49,14 +49,14 @@
 	.name = "I2S PCM Stereo in"
 };
 
-static struct s3c24xx_pcm_dma_params s3c24xx_i2s_pcm_stereo_out = {
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = {
 	.client		= &s3c24xx_dma_client_out,
 	.channel	= DMACH_I2S_OUT,
 	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
 	.dma_size	= 2,
 };
 
-static struct s3c24xx_pcm_dma_params s3c24xx_i2s_pcm_stereo_in = {
+static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = {
 	.client		= &s3c24xx_dma_client_in,
 	.channel	= DMACH_I2S_IN,
 	.dma_addr	= S3C2410_PA_IIS + S3C2410_IISFIFO,
@@ -258,12 +258,12 @@
 	switch (params_format(params)) {
 	case SNDRV_PCM_FORMAT_S8:
 		iismod &= ~S3C2410_IISMOD_16BIT;
-		((struct s3c24xx_pcm_dma_params *)
+		((struct s3c_dma_params *)
 		  rtd->dai->cpu_dai->dma_data)->dma_size = 1;
 		break;
 	case SNDRV_PCM_FORMAT_S16_LE:
 		iismod |= S3C2410_IISMOD_16BIT;
-		((struct s3c24xx_pcm_dma_params *)
+		((struct s3c_dma_params *)
 		  rtd->dai->cpu_dai->dma_data)->dma_size = 2;
 		break;
 	default:
@@ -280,7 +280,7 @@
 {
 	int ret = 0;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	int channel = ((struct s3c24xx_pcm_dma_params *)
+	int channel = ((struct s3c_dma_params *)
 		  rtd->dai->cpu_dai->dma_data)->channel;
 
 	pr_debug("Entered %s\n", __func__);
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c
deleted file mode 100644
index 1f35c6f..0000000
--- a/sound/soc/s3c24xx/s3c24xx-pcm.c
+++ /dev/null
@@ -1,481 +0,0 @@
-/*
- * s3c24xx-pcm.c  --  ALSA Soc Audio Layer
- *
- * (c) 2006 Wolfson Microelectronics PLC.
- * Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
- *
- * Copyright 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <plat/audio.h>
-
-#include "s3c24xx-pcm.h"
-
-static const struct snd_pcm_hardware s3c24xx_pcm_hardware = {
-	.info			= SNDRV_PCM_INFO_INTERLEAVED |
-				    SNDRV_PCM_INFO_BLOCK_TRANSFER |
-				    SNDRV_PCM_INFO_MMAP |
-				    SNDRV_PCM_INFO_MMAP_VALID |
-				    SNDRV_PCM_INFO_PAUSE |
-				    SNDRV_PCM_INFO_RESUME,
-	.formats		= SNDRV_PCM_FMTBIT_S16_LE |
-				    SNDRV_PCM_FMTBIT_U16_LE |
-				    SNDRV_PCM_FMTBIT_U8 |
-				    SNDRV_PCM_FMTBIT_S8,
-	.channels_min		= 2,
-	.channels_max		= 2,
-	.buffer_bytes_max	= 128*1024,
-	.period_bytes_min	= PAGE_SIZE,
-	.period_bytes_max	= PAGE_SIZE*2,
-	.periods_min		= 2,
-	.periods_max		= 128,
-	.fifo_size		= 32,
-};
-
-struct s3c24xx_runtime_data {
-	spinlock_t lock;
-	int state;
-	unsigned int dma_loaded;
-	unsigned int dma_limit;
-	unsigned int dma_period;
-	dma_addr_t dma_start;
-	dma_addr_t dma_pos;
-	dma_addr_t dma_end;
-	struct s3c24xx_pcm_dma_params *params;
-};
-
-/* s3c24xx_pcm_enqueue
- *
- * place a dma buffer onto the queue for the dma system
- * to handle.
-*/
-static void s3c24xx_pcm_enqueue(struct snd_pcm_substream *substream)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-	dma_addr_t pos = prtd->dma_pos;
-	unsigned int limit;
-	int ret;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (s3c_dma_has_circular()) {
-		limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-	} else
-		limit = prtd->dma_limit;
-
-	pr_debug("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit);
-
-	while (prtd->dma_loaded < limit) {
-		unsigned long len = prtd->dma_period;
-
-		pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
-
-		if ((pos + len) > prtd->dma_end) {
-			len  = prtd->dma_end - pos;
-			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
-			       __func__, len);
-		}
-
-		ret = s3c2410_dma_enqueue(prtd->params->channel,
-			substream, pos, len);
-
-		if (ret == 0) {
-			prtd->dma_loaded++;
-			pos += prtd->dma_period;
-			if (pos >= prtd->dma_end)
-				pos = prtd->dma_start;
-		} else
-			break;
-	}
-
-	prtd->dma_pos = pos;
-}
-
-static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel,
-				void *dev_id, int size,
-				enum s3c2410_dma_buffresult result)
-{
-	struct snd_pcm_substream *substream = dev_id;
-	struct s3c24xx_runtime_data *prtd;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR)
-		return;
-
-	prtd = substream->runtime->private_data;
-
-	if (substream)
-		snd_pcm_period_elapsed(substream);
-
-	spin_lock(&prtd->lock);
-	if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
-		prtd->dma_loaded--;
-		s3c24xx_pcm_enqueue(substream);
-	}
-
-	spin_unlock(&prtd->lock);
-}
-
-static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream,
-	struct snd_pcm_hw_params *params)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct s3c24xx_pcm_dma_params *dma = rtd->dai->cpu_dai->dma_data;
-	unsigned long totbytes = params_buffer_bytes(params);
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* return if this is a bufferless transfer e.g.
-	 * codec <--> BT codec or GSM modem -- lg FIXME */
-	if (!dma)
-		return 0;
-
-	/* this may get called several times by oss emulation
-	 * with different params -HW */
-	if (prtd->params == NULL) {
-		/* prepare DMA */
-		prtd->params = dma;
-
-		pr_debug("params %p, client %p, channel %d\n", prtd->params,
-			prtd->params->client, prtd->params->channel);
-
-		ret = s3c2410_dma_request(prtd->params->channel,
-					  prtd->params->client, NULL);
-
-		if (ret < 0) {
-			printk(KERN_ERR "failed to get dma channel\n");
-			return ret;
-		}
-
-		/* use the circular buffering if we have it available. */
-		if (s3c_dma_has_circular())
-			s3c2410_dma_setflags(prtd->params->channel,
-					     S3C2410_DMAF_CIRCULAR);
-	}
-
-	s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-				    s3c24xx_audio_buffdone);
-
-	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
-
-	runtime->dma_bytes = totbytes;
-
-	spin_lock_irq(&prtd->lock);
-	prtd->dma_loaded = 0;
-	prtd->dma_limit = runtime->hw.periods_min;
-	prtd->dma_period = params_period_bytes(params);
-	prtd->dma_start = runtime->dma_addr;
-	prtd->dma_pos = prtd->dma_start;
-	prtd->dma_end = prtd->dma_start + totbytes;
-	spin_unlock_irq(&prtd->lock);
-
-	return 0;
-}
-
-static int s3c24xx_pcm_hw_free(struct snd_pcm_substream *substream)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* TODO - do we need to ensure DMA flushed */
-	snd_pcm_set_runtime_buffer(substream, NULL);
-
-	if (prtd->params) {
-		s3c2410_dma_free(prtd->params->channel, prtd->params->client);
-		prtd->params = NULL;
-	}
-
-	return 0;
-}
-
-static int s3c24xx_pcm_prepare(struct snd_pcm_substream *substream)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	/* return if this is a bufferless transfer e.g.
-	 * codec <--> BT codec or GSM modem -- lg FIXME */
-	if (!prtd->params)
-		return 0;
-
-	/* channel needs configuring for mem=>device, increment memory addr,
-	 * sync to pclk, half-word transfers to the IIS-FIFO. */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_MEM,
-				      prtd->params->dma_addr);
-	} else {
-		s3c2410_dma_devconfig(prtd->params->channel,
-				      S3C2410_DMASRC_HW,
-				      prtd->params->dma_addr);
-	}
-
-	s3c2410_dma_config(prtd->params->channel,
-			   prtd->params->dma_size);
-
-	/* flush the DMA channel */
-	s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
-	prtd->dma_loaded = 0;
-	prtd->dma_pos = prtd->dma_start;
-
-	/* enqueue dma buffers */
-	s3c24xx_pcm_enqueue(substream);
-
-	return ret;
-}
-
-static int s3c24xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
-	struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	spin_lock(&prtd->lock);
-
-	switch (cmd) {
-	case SNDRV_PCM_TRIGGER_START:
-	case SNDRV_PCM_TRIGGER_RESUME:
-	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		prtd->state |= ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START);
-		break;
-
-	case SNDRV_PCM_TRIGGER_STOP:
-	case SNDRV_PCM_TRIGGER_SUSPEND:
-	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		prtd->state &= ~ST_RUNNING;
-		s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP);
-		break;
-
-	default:
-		ret = -EINVAL;
-		break;
-	}
-
-	spin_unlock(&prtd->lock);
-
-	return ret;
-}
-
-static snd_pcm_uframes_t
-s3c24xx_pcm_pointer(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
-	unsigned long res;
-	dma_addr_t src, dst;
-
-	pr_debug("Entered %s\n", __func__);
-
-	spin_lock(&prtd->lock);
-	s3c2410_dma_getposition(prtd->params->channel, &src, &dst);
-
-	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
-		res = dst - prtd->dma_start;
-	else
-		res = src - prtd->dma_start;
-
-	spin_unlock(&prtd->lock);
-
-	pr_debug("Pointer %x %x\n", src, dst);
-
-	/* we seem to be getting the odd error from the pcm library due
-	 * to out-of-bounds pointers. this is maybe due to the dma engine
-	 * not having loaded the new values for the channel before being
-	 * callled... (todo - fix )
-	 */
-
-	if (res >= snd_pcm_lib_buffer_bytes(substream)) {
-		if (res == snd_pcm_lib_buffer_bytes(substream))
-			res = 0;
-	}
-
-	return bytes_to_frames(substream->runtime, res);
-}
-
-static int s3c24xx_pcm_open(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd;
-
-	pr_debug("Entered %s\n", __func__);
-
-	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
-	snd_soc_set_runtime_hwparams(substream, &s3c24xx_pcm_hardware);
-
-	prtd = kzalloc(sizeof(struct s3c24xx_runtime_data), GFP_KERNEL);
-	if (prtd == NULL)
-		return -ENOMEM;
-
-	spin_lock_init(&prtd->lock);
-
-	runtime->private_data = prtd;
-	return 0;
-}
-
-static int s3c24xx_pcm_close(struct snd_pcm_substream *substream)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct s3c24xx_runtime_data *prtd = runtime->private_data;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!prtd)
-		pr_debug("s3c24xx_pcm_close called with prtd == NULL\n");
-
-	kfree(prtd);
-
-	return 0;
-}
-
-static int s3c24xx_pcm_mmap(struct snd_pcm_substream *substream,
-	struct vm_area_struct *vma)
-{
-	struct snd_pcm_runtime *runtime = substream->runtime;
-
-	pr_debug("Entered %s\n", __func__);
-
-	return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-				     runtime->dma_area,
-				     runtime->dma_addr,
-				     runtime->dma_bytes);
-}
-
-static struct snd_pcm_ops s3c24xx_pcm_ops = {
-	.open		= s3c24xx_pcm_open,
-	.close		= s3c24xx_pcm_close,
-	.ioctl		= snd_pcm_lib_ioctl,
-	.hw_params	= s3c24xx_pcm_hw_params,
-	.hw_free	= s3c24xx_pcm_hw_free,
-	.prepare	= s3c24xx_pcm_prepare,
-	.trigger	= s3c24xx_pcm_trigger,
-	.pointer	= s3c24xx_pcm_pointer,
-	.mmap		= s3c24xx_pcm_mmap,
-};
-
-static int s3c24xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
-	struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-	struct snd_dma_buffer *buf = &substream->dma_buffer;
-	size_t size = s3c24xx_pcm_hardware.buffer_bytes_max;
-
-	pr_debug("Entered %s\n", __func__);
-
-	buf->dev.type = SNDRV_DMA_TYPE_DEV;
-	buf->dev.dev = pcm->card->dev;
-	buf->private_data = NULL;
-	buf->area = dma_alloc_writecombine(pcm->card->dev, size,
-					   &buf->addr, GFP_KERNEL);
-	if (!buf->area)
-		return -ENOMEM;
-	buf->bytes = size;
-	return 0;
-}
-
-static void s3c24xx_pcm_free_dma_buffers(struct snd_pcm *pcm)
-{
-	struct snd_pcm_substream *substream;
-	struct snd_dma_buffer *buf;
-	int stream;
-
-	pr_debug("Entered %s\n", __func__);
-
-	for (stream = 0; stream < 2; stream++) {
-		substream = pcm->streams[stream].substream;
-		if (!substream)
-			continue;
-
-		buf = &substream->dma_buffer;
-		if (!buf->area)
-			continue;
-
-		dma_free_writecombine(pcm->card->dev, buf->bytes,
-				      buf->area, buf->addr);
-		buf->area = NULL;
-	}
-}
-
-static u64 s3c24xx_pcm_dmamask = DMA_BIT_MASK(32);
-
-static int s3c24xx_pcm_new(struct snd_card *card,
-	struct snd_soc_dai *dai, struct snd_pcm *pcm)
-{
-	int ret = 0;
-
-	pr_debug("Entered %s\n", __func__);
-
-	if (!card->dev->dma_mask)
-		card->dev->dma_mask = &s3c24xx_pcm_dmamask;
-	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = 0xffffffff;
-
-	if (dai->playback.channels_min) {
-		ret = s3c24xx_pcm_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_PLAYBACK);
-		if (ret)
-			goto out;
-	}
-
-	if (dai->capture.channels_min) {
-		ret = s3c24xx_pcm_preallocate_dma_buffer(pcm,
-			SNDRV_PCM_STREAM_CAPTURE);
-		if (ret)
-			goto out;
-	}
- out:
-	return ret;
-}
-
-struct snd_soc_platform s3c24xx_soc_platform = {
-	.name		= "s3c24xx-audio",
-	.pcm_ops 	= &s3c24xx_pcm_ops,
-	.pcm_new	= s3c24xx_pcm_new,
-	.pcm_free	= s3c24xx_pcm_free_dma_buffers,
-};
-EXPORT_SYMBOL_GPL(s3c24xx_soc_platform);
-
-static int __init s3c24xx_soc_platform_init(void)
-{
-	return snd_soc_register_platform(&s3c24xx_soc_platform);
-}
-module_init(s3c24xx_soc_platform_init);
-
-static void __exit s3c24xx_soc_platform_exit(void)
-{
-	snd_soc_unregister_platform(&s3c24xx_soc_platform);
-}
-module_exit(s3c24xx_soc_platform_exit);
-
-MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C24XX PCM DMA module");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.h b/sound/soc/s3c24xx/s3c24xx-pcm.h
deleted file mode 100644
index 0088c79..0000000
--- a/sound/soc/s3c24xx/s3c24xx-pcm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  s3c24xx-pcm.h --
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  ALSA PCM interface for the Samsung S3C24xx CPU
- */
-
-#ifndef _S3C24XX_PCM_H
-#define _S3C24XX_PCM_H
-
-#define ST_RUNNING		(1<<0)
-#define ST_OPENED		(1<<1)
-
-struct s3c24xx_pcm_dma_params {
-	struct s3c2410_dma_client *client;	/* stream identifier */
-	int channel;				/* Channel ID */
-	dma_addr_t dma_addr;
-	int dma_size;			/* Size of the DMA transfer */
-};
-
-#define S3C24XX_DAI_I2S			0
-
-/* platform data */
-extern struct snd_soc_platform s3c24xx_soc_platform;
-extern struct snd_ac97_bus_ops s3c24xx_ac97_ops;
-
-#endif
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c
index 1966e0d..507b2ed 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.c
@@ -21,7 +21,7 @@
 
 #include <plat/audio-simtec.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
index 8346bd9..bdf8951 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_hermes.c
@@ -18,7 +18,7 @@
 
 #include <plat/audio-simtec.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
index 25797e0..185c0ac 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec_tlv320aic23.c
@@ -18,7 +18,7 @@
 
 #include <plat/audio-simtec.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 #include "s3c24xx_simtec.h"
 
diff --git a/sound/soc/s3c24xx/s3c24xx_uda134x.c b/sound/soc/s3c24xx/s3c24xx_uda134x.c
index c215d32..052d596 100644
--- a/sound/soc/s3c24xx/s3c24xx_uda134x.c
+++ b/sound/soc/s3c24xx/s3c24xx_uda134x.c
@@ -24,7 +24,7 @@
 
 #include <plat/regs-iis.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-i2s.h"
 #include "../codecs/uda134x.h"
 
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c
index 105a77e..cc7edb5 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.c
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.c
@@ -31,12 +31,11 @@
 #include <plat/gpio-bank-d.h>
 #include <plat/gpio-bank-e.h>
 #include <plat/gpio-cfg.h>
-#include <plat/audio.h>
 
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c64xx-i2s.h"
 
 static struct s3c2410_dma_client s3c64xx_dma_client_out = {
@@ -47,7 +46,7 @@
 	.name		= "I2S PCM Stereo in"
 };
 
-static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_out[2] = {
+static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_out[2] = {
 	[0] = {
 		.channel	= DMACH_I2S0_OUT,
 		.client		= &s3c64xx_dma_client_out,
@@ -62,7 +61,7 @@
 	},
 };
 
-static struct s3c24xx_pcm_dma_params s3c64xx_i2s_pcm_stereo_in[2] = {
+static struct s3c_dma_params s3c64xx_i2s_pcm_stereo_in[2] = {
 	[0] = {
 		.channel	= DMACH_I2S0_IN,
 		.client		= &s3c64xx_dma_client_in,
@@ -99,6 +98,19 @@
 		iismod |= S3C64XX_IISMOD_IMS_SYSMUX;
 		break;
 
+	case S3C64XX_CLKSRC_CDCLK:
+		switch (dir) {
+		case SND_SOC_CLOCK_IN:
+			iismod |= S3C64XX_IISMOD_CDCLKCON;
+			break;
+		case SND_SOC_CLOCK_OUT:
+			iismod &= ~S3C64XX_IISMOD_CDCLKCON;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+
 	default:
 		return -EINVAL;
 	}
@@ -111,8 +123,12 @@
 struct clk *s3c64xx_i2s_get_clock(struct snd_soc_dai *dai)
 {
 	struct s3c_i2sv2_info *i2s = to_info(dai);
+	u32 iismod = readl(i2s->regs + S3C2412_IISMOD);
 
-	return i2s->iis_cclk;
+	if (iismod & S3C64XX_IISMOD_IMS_SYSMUX)
+		return i2s->iis_cclk;
+	else
+		return i2s->iis_pclk;
 }
 EXPORT_SYMBOL_GPL(s3c64xx_i2s_get_clock);
 
diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.h b/sound/soc/s3c24xx/s3c64xx-i2s.h
index 02148ce..abe7253 100644
--- a/sound/soc/s3c24xx/s3c64xx-i2s.h
+++ b/sound/soc/s3c24xx/s3c64xx-i2s.h
@@ -25,6 +25,7 @@
 
 #define S3C64XX_CLKSRC_PCLK	(0)
 #define S3C64XX_CLKSRC_MUX	(1)
+#define S3C64XX_CLKSRC_CDCLK    (2)
 
 extern struct snd_soc_dai s3c64xx_i2s_dai[];
 
diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c
index a2a4f53..12b783b1 100644
--- a/sound/soc/s3c24xx/smdk2443_wm9710.c
+++ b/sound/soc/s3c24xx/smdk2443_wm9710.c
@@ -20,7 +20,7 @@
 #include <sound/soc-dapm.h>
 
 #include "../codecs/ac97.h"
-#include "s3c24xx-pcm.h"
+#include "s3c-dma.h"
 #include "s3c24xx-ac97.h"
 
 static struct snd_soc_card smdk2443;
diff --git a/sound/soc/s3c24xx/smdk64xx_wm8580.c b/sound/soc/s3c24xx/smdk64xx_wm8580.c
new file mode 100644
index 0000000..efe4901
--- /dev/null
+++ b/sound/soc/s3c24xx/smdk64xx_wm8580.c
@@ -0,0 +1,268 @@
+/*
+ *  smdk64xx_wm8580.c
+ *
+ *  Copyright (c) 2009 Samsung Electronics Co. Ltd
+ *  Author: Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8580.h"
+#include "s3c-dma.h"
+#include "s3c64xx-i2s.h"
+
+#define S3C64XX_I2S_V4 2
+
+/* SMDK64XX has a 12MHZ crystal attached to WM8580 */
+#define SMDK64XX_WM8580_FREQ 12000000
+
+static int smdk64xx_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+	unsigned int pll_out;
+	int bfs, rfs, ret;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_U8:
+	case SNDRV_PCM_FORMAT_S8:
+		bfs = 16;
+		break;
+	case SNDRV_PCM_FORMAT_U16_LE:
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bfs = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* The Fvco for WM8580 PLLs must fall within [90,100]MHz.
+	 * This criterion can't be met if we request PLL output
+	 * as {8000x256, 64000x256, 11025x256}Hz.
+	 * As a wayout, we rather change rfs to a minimum value that
+	 * results in (params_rate(params) * rfs), and itself, acceptable
+	 * to both - the CODEC and the CPU.
+	 */
+	switch (params_rate(params)) {
+	case 16000:
+	case 22050:
+	case 32000:
+	case 44100:
+	case 48000:
+	case 88200:
+	case 96000:
+		rfs = 256;
+		break;
+	case 64000:
+		rfs = 384;
+		break;
+	case 8000:
+	case 11025:
+		rfs = 512;
+		break;
+	default:
+		return -EINVAL;
+	}
+	pll_out = params_rate(params) * rfs;
+
+	/* Set the Codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	/* Set the AP DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S
+					 | SND_SOC_DAIFMT_NB_NF
+					 | SND_SOC_DAIFMT_CBM_CFM);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_CDCLK,
+					0, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* We use PCLK for basic ops in SoC-Slave mode */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_PCLK,
+					0, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* Set WM8580 to drive MCLK from its PLLA */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK,
+					WM8580_CLKSRC_PLLA);
+	if (ret < 0)
+		return ret;
+
+	/* Explicitly set WM8580-DAC to source from MCLK */
+	ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_DAC_CLKSEL,
+					WM8580_CLKSRC_MCLK);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0,
+					SMDK64XX_WM8580_FREQ, pll_out);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_BCLK, bfs);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_I2SV2_DIV_RCLK, rfs);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * SMDK64XX WM8580 DAI operations.
+ */
+static struct snd_soc_ops smdk64xx_ops = {
+	.hw_params = smdk64xx_hw_params,
+};
+
+/* SMDK64xx Playback widgets */
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets_pbk[] = {
+	SND_SOC_DAPM_HP("Front-L/R", NULL),
+	SND_SOC_DAPM_HP("Center/Sub", NULL),
+	SND_SOC_DAPM_HP("Rear-L/R", NULL),
+};
+
+/* SMDK64xx Capture widgets */
+static const struct snd_soc_dapm_widget wm8580_dapm_widgets_cpt[] = {
+	SND_SOC_DAPM_MIC("MicIn", NULL),
+	SND_SOC_DAPM_LINE("LineIn", NULL),
+};
+
+/* SMDK-PAIFTX connections */
+static const struct snd_soc_dapm_route audio_map_tx[] = {
+	/* MicIn feeds AINL */
+	{"AINL", NULL, "MicIn"},
+
+	/* LineIn feeds AINL/R */
+	{"AINL", NULL, "LineIn"},
+	{"AINR", NULL, "LineIn"},
+};
+
+/* SMDK-PAIFRX connections */
+static const struct snd_soc_dapm_route audio_map_rx[] = {
+	/* Front Left/Right are fed VOUT1L/R */
+	{"Front-L/R", NULL, "VOUT1L"},
+	{"Front-L/R", NULL, "VOUT1R"},
+
+	/* Center/Sub are fed VOUT2L/R */
+	{"Center/Sub", NULL, "VOUT2L"},
+	{"Center/Sub", NULL, "VOUT2R"},
+
+	/* Rear Left/Right are fed VOUT3L/R */
+	{"Rear-L/R", NULL, "VOUT3L"},
+	{"Rear-L/R", NULL, "VOUT3R"},
+};
+
+static int smdk64xx_wm8580_init_paiftx(struct snd_soc_codec *codec)
+{
+	/* Add smdk64xx specific Capture widgets */
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_cpt,
+				  ARRAY_SIZE(wm8580_dapm_widgets_cpt));
+
+	/* Set up PAIFTX audio path */
+	snd_soc_dapm_add_routes(codec, audio_map_tx, ARRAY_SIZE(audio_map_tx));
+
+	/* Enabling the microphone requires the fitting of a 0R
+	 * resistor to connect the line from the microphone jack.
+	 */
+	snd_soc_dapm_disable_pin(codec, "MicIn");
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static int smdk64xx_wm8580_init_paifrx(struct snd_soc_codec *codec)
+{
+	/* Add smdk64xx specific Playback widgets */
+	snd_soc_dapm_new_controls(codec, wm8580_dapm_widgets_pbk,
+				  ARRAY_SIZE(wm8580_dapm_widgets_pbk));
+
+	/* Set up PAIFRX audio path */
+	snd_soc_dapm_add_routes(codec, audio_map_rx, ARRAY_SIZE(audio_map_rx));
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(codec);
+
+	return 0;
+}
+
+static struct snd_soc_dai_link smdk64xx_dai[] = {
+{ /* Primary Playback i/f */
+	.name = "WM8580 PAIF RX",
+	.stream_name = "Playback",
+	.cpu_dai = &s3c64xx_i2s_dai[S3C64XX_I2S_V4],
+	.codec_dai = &wm8580_dai[WM8580_DAI_PAIFRX],
+	.init = smdk64xx_wm8580_init_paifrx,
+	.ops = &smdk64xx_ops,
+},
+{ /* Primary Capture i/f */
+	.name = "WM8580 PAIF TX",
+	.stream_name = "Capture",
+	.cpu_dai = &s3c64xx_i2s_dai[S3C64XX_I2S_V4],
+	.codec_dai = &wm8580_dai[WM8580_DAI_PAIFTX],
+	.init = smdk64xx_wm8580_init_paiftx,
+	.ops = &smdk64xx_ops,
+},
+};
+
+static struct snd_soc_card smdk64xx = {
+	.name = "smdk64xx",
+	.platform = &s3c24xx_soc_platform,
+	.dai_link = smdk64xx_dai,
+	.num_links = ARRAY_SIZE(smdk64xx_dai),
+};
+
+static struct snd_soc_device smdk64xx_snd_devdata = {
+	.card = &smdk64xx,
+	.codec_dev = &soc_codec_dev_wm8580,
+};
+
+static struct platform_device *smdk64xx_snd_device;
+
+static int __init smdk64xx_audio_init(void)
+{
+	int ret;
+
+	smdk64xx_snd_device = platform_device_alloc("soc-audio", -1);
+	if (!smdk64xx_snd_device)
+		return -ENOMEM;
+
+	platform_set_drvdata(smdk64xx_snd_device, &smdk64xx_snd_devdata);
+	smdk64xx_snd_devdata.dev = &smdk64xx_snd_device->dev;
+	ret = platform_device_add(smdk64xx_snd_device);
+
+	if (ret)
+		platform_device_put(smdk64xx_snd_device);
+
+	return ret;
+}
+module_init(smdk64xx_audio_init);
+
+MODULE_AUTHOR("Jaswinder Singh, jassi.brar@samsung.com");
+MODULE_DESCRIPTION("ALSA SoC SMDK64XX WM8580");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
index 83b8028..0eb1722 100644
--- a/sound/soc/s6000/s6000-pcm.c
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -423,7 +423,7 @@
 	snd_pcm_lib_preallocate_free_for_all(pcm);
 }
 
-static u64 s6000_pcm_dmamask = DMA_32BIT_MASK;
+static u64 s6000_pcm_dmamask = DMA_BIT_MASK(32);
 
 static int s6000_pcm_new(struct snd_card *card,
 			 struct snd_soc_dai *dai, struct snd_pcm *pcm)
@@ -435,7 +435,7 @@
 	if (!card->dev->dma_mask)
 		card->dev->dma_mask = &s6000_pcm_dmamask;
 	if (!card->dev->coherent_dma_mask)
-		card->dev->coherent_dma_mask = DMA_32BIT_MASK;
+		card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
 
 	if (params->dma_in) {
 		s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig
index 9154b43..9e69765 100644
--- a/sound/soc/sh/Kconfig
+++ b/sound/soc/sh/Kconfig
@@ -23,7 +23,6 @@
 config SND_SOC_SH4_FSI
 	tristate "SH4 FSI support"
 	depends on CPU_SUBTYPE_SH7724
-        select SH_DMA
 	help
 	  This option enables FSI sound support
 
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 4412324..9c49c11 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/list.h>
-#include <linux/clk.h>
+#include <linux/pm_runtime.h>
 #include <linux/io.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -26,8 +26,6 @@
 #include <sound/pcm_params.h>
 #include <sound/sh_fsi.h>
 #include <asm/atomic.h>
-#include <asm/dma.h>
-#include <asm/dma-sh.h>
 
 #define DO_FMT		0x0000
 #define DOFF_CTL	0x0004
@@ -97,7 +95,6 @@
 
 	int fifo_max;
 	int chan;
-	int dma_chan;
 
 	int byte_offset;
 	int period_len;
@@ -108,7 +105,6 @@
 struct fsi_master {
 	void __iomem *base;
 	int irq;
-	struct clk *clk;
 	struct fsi_priv fsia;
 	struct fsi_priv fsib;
 	struct sh_fsi_platform_info *info;
@@ -308,62 +304,6 @@
 	return residue;
 }
 
-static int fsi_get_residue(struct fsi_priv *fsi, int is_play)
-{
-	int residue;
-	int width;
-	struct snd_pcm_runtime *runtime;
-
-	runtime = fsi->substream->runtime;
-
-	/* get 1 channel data width */
-	width = frames_to_bytes(runtime, 1) / fsi->chan;
-
-	if (2 == width)
-		residue = fsi_get_fifo_residue(fsi, is_play);
-	else
-		residue = get_dma_residue(fsi->dma_chan);
-
-	return residue;
-}
-
-/************************************************************************
-
-
-		basic dma function
-
-
-************************************************************************/
-#define PORTA_DMA 0
-#define PORTB_DMA 1
-
-static int fsi_get_dma_chan(void)
-{
-	if (0 != request_dma(PORTA_DMA, "fsia"))
-		return -EIO;
-
-	if (0 != request_dma(PORTB_DMA, "fsib")) {
-		free_dma(PORTA_DMA);
-		return -EIO;
-	}
-
-	master->fsia.dma_chan = PORTA_DMA;
-	master->fsib.dma_chan = PORTB_DMA;
-
-	return 0;
-}
-
-static void fsi_free_dma_chan(void)
-{
-	dma_wait_for_completion(PORTA_DMA);
-	dma_wait_for_completion(PORTB_DMA);
-	free_dma(PORTA_DMA);
-	free_dma(PORTB_DMA);
-
-	master->fsia.dma_chan = -1;
-	master->fsib.dma_chan = -1;
-}
-
 /************************************************************************
 
 
@@ -435,44 +375,6 @@
 	mdelay(10);
 }
 
-static void fsi_16data_push(struct fsi_priv *fsi,
-			   struct snd_pcm_runtime *runtime,
-			   int send)
-{
-	u16 *dma_start;
-	u32 snd;
-	int i;
-
-	/* get dma start position for FSI */
-	dma_start = (u16 *)runtime->dma_area;
-	dma_start += fsi->byte_offset / 2;
-
-	/*
-	 * soft dma
-	 * FSI can not use DMA when 16bpp
-	 */
-	for (i = 0; i < send; i++) {
-		snd = (u32)dma_start[i];
-		fsi_reg_write(fsi, DODT, snd << 8);
-	}
-}
-
-static void fsi_32data_push(struct fsi_priv *fsi,
-			   struct snd_pcm_runtime *runtime,
-			   int send)
-{
-	u32 *dma_start;
-
-	/* get dma start position for FSI */
-	dma_start = (u32 *)runtime->dma_area;
-	dma_start += fsi->byte_offset / 4;
-
-	dma_wait_for_completion(fsi->dma_chan);
-	dma_configure_channel(fsi->dma_chan, (SM_INC|0x400|TS_32|TM_BUR));
-	dma_write(fsi->dma_chan, (u32)dma_start,
-		  (u32)(fsi->base + DODT), send * 4);
-}
-
 /* playback interrupt */
 static int fsi_data_push(struct fsi_priv *fsi)
 {
@@ -481,6 +383,8 @@
 	int send;
 	int fifo_free;
 	int width;
+	u8 *start;
+	int i;
 
 	if (!fsi			||
 	    !fsi->substream		||
@@ -515,12 +419,22 @@
 	if (fifo_free < send)
 		send = fifo_free;
 
-	if (2 == width)
-		fsi_16data_push(fsi, runtime, send);
-	else if (4 == width)
-		fsi_32data_push(fsi, runtime, send);
-	else
+	start = runtime->dma_area;
+	start += fsi->byte_offset;
+
+	switch (width) {
+	case 2:
+		for (i = 0; i < send; i++)
+			fsi_reg_write(fsi, DODT,
+				      ((u32)*((u16 *)start + i) << 8));
+		break;
+	case 4:
+		for (i = 0; i < send; i++)
+			fsi_reg_write(fsi, DODT, *((u32 *)start + i));
+		break;
+	default:
 		return -EINVAL;
+	}
 
 	fsi->byte_offset += send * width;
 
@@ -532,6 +446,75 @@
 	return 0;
 }
 
+static int fsi_data_pop(struct fsi_priv *fsi)
+{
+	struct snd_pcm_runtime *runtime;
+	struct snd_pcm_substream *substream = NULL;
+	int free;
+	int fifo_fill;
+	int width;
+	u8 *start;
+	int i;
+
+	if (!fsi			||
+	    !fsi->substream		||
+	    !fsi->substream->runtime)
+		return -EINVAL;
+
+	runtime = fsi->substream->runtime;
+
+	/* FSI FIFO has limit.
+	 * So, this driver can not send periods data at a time
+	 */
+	if (fsi->byte_offset >=
+	    fsi->period_len * (fsi->periods + 1)) {
+
+		substream = fsi->substream;
+		fsi->periods = (fsi->periods + 1) % runtime->periods;
+
+		if (0 == fsi->periods)
+			fsi->byte_offset = 0;
+	}
+
+	/* get 1 channel data width */
+	width = frames_to_bytes(runtime, 1) / fsi->chan;
+
+	/* get free space for alsa */
+	free = (fsi->buffer_len - fsi->byte_offset) / width;
+
+	/* get recv size */
+	fifo_fill = fsi_get_fifo_residue(fsi, 0);
+
+	if (free < fifo_fill)
+		fifo_fill = free;
+
+	start = runtime->dma_area;
+	start += fsi->byte_offset;
+
+	switch (width) {
+	case 2:
+		for (i = 0; i < fifo_fill; i++)
+			*((u16 *)start + i) =
+				(u16)(fsi_reg_read(fsi, DIDT) >> 8);
+		break;
+	case 4:
+		for (i = 0; i < fifo_fill; i++)
+			*((u32 *)start + i) = fsi_reg_read(fsi, DIDT);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	fsi->byte_offset += fifo_fill * width;
+
+	fsi_irq_enable(fsi, 0);
+
+	if (substream)
+		snd_pcm_period_elapsed(substream);
+
+	return 0;
+}
+
 static irqreturn_t fsi_interrupt(int irq, void *data)
 {
 	u32 status = fsi_master_read(SOFT_RST) & ~0x00000010;
@@ -545,6 +528,10 @@
 		fsi_data_push(&master->fsia);
 	if (int_st & INT_B_OUT)
 		fsi_data_push(&master->fsib);
+	if (int_st & INT_A_IN)
+		fsi_data_pop(&master->fsia);
+	if (int_st & INT_B_IN)
+		fsi_data_pop(&master->fsib);
 
 	fsi_master_write(INT_ST, 0x0000000);
 
@@ -571,7 +558,7 @@
 	int is_master;
 	int ret = 0;
 
-	clk_enable(master->clk);
+	pm_runtime_get_sync(dai->dev);
 
 	/* CKG1 */
 	data = is_play ? (1 << 0) : (1 << 4);
@@ -664,8 +651,6 @@
 	}
 
 	fsi_reg_write(fsi, reg, data);
-	dev_dbg(dai->dev, "use %s format (%d channel) use %d DMAC\n",
-		msg, fsi->chan, fsi->dma_chan);
 
 	/*
 	 * clear clk reset if master mode
@@ -688,7 +673,7 @@
 	fsi_irq_disable(fsi, is_play);
 	fsi_clk_ctrl(fsi, 0);
 
-	clk_disable(master->clk);
+	pm_runtime_put_sync(dai->dev);
 }
 
 static int fsi_dai_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -699,16 +684,12 @@
 	int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	int ret = 0;
 
-	/* capture not supported */
-	if (!is_play)
-		return -ENODEV;
-
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
 		fsi_stream_push(fsi, substream,
 				frames_to_bytes(runtime, runtime->buffer_size),
 				frames_to_bytes(runtime, runtime->period_size));
-		ret = fsi_data_push(fsi);
+		ret = is_play ? fsi_data_push(fsi) : fsi_data_pop(fsi);
 		break;
 	case SNDRV_PCM_TRIGGER_STOP:
 		fsi_irq_disable(fsi, is_play);
@@ -780,10 +761,9 @@
 {
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct fsi_priv *fsi = fsi_get(substream);
-	int is_play = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
 	long location;
 
-	location = (fsi->byte_offset - 1) - fsi_get_residue(fsi, is_play);
+	location = (fsi->byte_offset - 1);
 	if (location < 0)
 		location = 0;
 
@@ -845,7 +825,12 @@
 			.channels_min	= 1,
 			.channels_max	= 8,
 		},
-		/* capture not supported */
+		.capture = {
+			.rates		= FSI_RATES,
+			.formats	= FSI_FMTS,
+			.channels_min	= 1,
+			.channels_max	= 8,
+		},
 		.ops = &fsi_dai_ops,
 	},
 	{
@@ -857,7 +842,12 @@
 			.channels_min	= 1,
 			.channels_max	= 8,
 		},
-		/* capture not supported */
+		.capture = {
+			.rates		= FSI_RATES,
+			.formats	= FSI_FMTS,
+			.channels_min	= 1,
+			.channels_max	= 8,
+		},
 		.ops = &fsi_dai_ops,
 	},
 };
@@ -881,7 +871,6 @@
 static int fsi_probe(struct platform_device *pdev)
 {
 	struct resource *res;
-	char clk_name[8];
 	unsigned int irq;
 	int ret;
 
@@ -912,23 +901,8 @@
 	master->fsia.base	= master->base;
 	master->fsib.base	= master->base + 0x40;
 
-	master->fsia.dma_chan = -1;
-	master->fsib.dma_chan = -1;
-
-	ret = fsi_get_dma_chan();
-	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot get dma api\n");
-		goto exit_iounmap;
-	}
-
-	/* FSI is based on SPU mstp */
-	snprintf(clk_name, sizeof(clk_name), "spu%d", pdev->id);
-	master->clk = clk_get(NULL, clk_name);
-	if (IS_ERR(master->clk)) {
-		dev_err(&pdev->dev, "cannot get %s mstp\n", clk_name);
-		ret = -EIO;
-		goto exit_free_dma;
-	}
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
 
 	fsi_soc_dai[0].dev		= &pdev->dev;
 	fsi_soc_dai[1].dev		= &pdev->dev;
@@ -938,7 +912,7 @@
 	ret = request_irq(irq, &fsi_interrupt, IRQF_DISABLED, "fsi", master);
 	if (ret) {
 		dev_err(&pdev->dev, "irq request err\n");
-		goto exit_free_dma;
+		goto exit_iounmap;
 	}
 
 	ret = snd_soc_register_platform(&fsi_soc_platform);
@@ -951,10 +925,9 @@
 
 exit_free_irq:
 	free_irq(irq, master);
-exit_free_dma:
-	fsi_free_dma_chan();
 exit_iounmap:
 	iounmap(master->base);
+	pm_runtime_disable(&pdev->dev);
 exit_kfree:
 	kfree(master);
 	master = NULL;
@@ -967,9 +940,7 @@
 	snd_soc_unregister_dais(fsi_soc_dai, ARRAY_SIZE(fsi_soc_dai));
 	snd_soc_unregister_platform(&fsi_soc_platform);
 
-	clk_put(master->clk);
-
-	fsi_free_dma_chan();
+	pm_runtime_disable(&pdev->dev);
 
 	free_irq(master->irq, master);
 
@@ -979,9 +950,27 @@
 	return 0;
 }
 
+static int fsi_runtime_nop(struct device *dev)
+{
+	/* Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops fsi_pm_ops = {
+	.runtime_suspend	= fsi_runtime_nop,
+	.runtime_resume		= fsi_runtime_nop,
+};
+
 static struct platform_driver fsi_driver = {
 	.driver 	= {
 		.name	= "sh_fsi",
+		.pm	= &fsi_pm_ops,
 	},
 	.probe		= fsi_probe,
 	.remove		= fsi_remove,
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index c8ceddc..d2505e8 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -77,6 +77,35 @@
 #define snd_soc_7_9_spi_write NULL
 #endif
 
+static int snd_soc_8_8_write(struct snd_soc_codec *codec, unsigned int reg,
+			     unsigned int value)
+{
+	u8 *cache = codec->reg_cache;
+	u8 data[2];
+
+	BUG_ON(codec->volatile_register);
+
+	data[0] = reg & 0xff;
+	data[1] = value & 0xff;
+
+	if (reg < codec->reg_cache_size)
+		cache[reg] = value;
+
+	if (codec->hw_write(codec->control_data, data, 2) == 2)
+		return 0;
+	else
+		return -EIO;
+}
+
+static unsigned int snd_soc_8_8_read(struct snd_soc_codec *codec,
+				     unsigned int reg)
+{
+	u8 *cache = codec->reg_cache;
+	if (reg >= codec->reg_cache_size)
+		return -1;
+	return cache[reg];
+}
+
 static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
 			      unsigned int value)
 {
@@ -150,9 +179,20 @@
 	unsigned int (*read)(struct snd_soc_codec *, unsigned int);
 	unsigned int (*i2c_read)(struct snd_soc_codec *, unsigned int);
 } io_types[] = {
-	{ 7, 9, snd_soc_7_9_write, snd_soc_7_9_spi_write, snd_soc_7_9_read },
-	{ 8, 16, snd_soc_8_16_write, NULL, snd_soc_8_16_read,
-	  snd_soc_8_16_read_i2c },
+	{
+		.addr_bits = 7, .data_bits = 9,
+		.write = snd_soc_7_9_write, .read = snd_soc_7_9_read,
+		.spi_write = snd_soc_7_9_spi_write 
+	},
+	{
+		.addr_bits = 8, .data_bits = 8,
+		.write = snd_soc_8_8_write, .read = snd_soc_8_8_read,
+	},
+	{
+		.addr_bits = 8, .data_bits = 16,
+		.write = snd_soc_8_16_write, .read = snd_soc_8_16_read,
+		.i2c_read = snd_soc_8_16_read_i2c,
+	},
 };
 
 /**
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 0a1b2f6..ef8f282 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -37,7 +37,6 @@
 #include <sound/initval.h>
 
 static DEFINE_MUTEX(pcm_mutex);
-static DEFINE_MUTEX(io_mutex);
 static DECLARE_WAIT_QUEUE_HEAD(soc_pm_waitq);
 
 #ifdef CONFIG_DEBUG_FS
@@ -81,6 +80,173 @@
 	return ret;
 }
 
+/* codec register dump */
+static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
+{
+	int i, step = 1, count = 0;
+
+	if (!codec->reg_cache_size)
+		return 0;
+
+	if (codec->reg_cache_step)
+		step = codec->reg_cache_step;
+
+	count += sprintf(buf, "%s registers\n", codec->name);
+	for (i = 0; i < codec->reg_cache_size; i += step) {
+		if (codec->readable_register && !codec->readable_register(i))
+			continue;
+
+		count += sprintf(buf + count, "%2x: ", i);
+		if (count >= PAGE_SIZE - 1)
+			break;
+
+		if (codec->display_register)
+			count += codec->display_register(codec, buf + count,
+							 PAGE_SIZE - count, i);
+		else
+			count += snprintf(buf + count, PAGE_SIZE - count,
+					  "%4x", codec->read(codec, i));
+
+		if (count >= PAGE_SIZE - 1)
+			break;
+
+		count += snprintf(buf + count, PAGE_SIZE - count, "\n");
+		if (count >= PAGE_SIZE - 1)
+			break;
+	}
+
+	/* Truncate count; min() would cause a warning */
+	if (count >= PAGE_SIZE)
+		count = PAGE_SIZE - 1;
+
+	return count;
+}
+static ssize_t codec_reg_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct snd_soc_device *devdata = dev_get_drvdata(dev);
+	return soc_codec_reg_show(devdata->card->codec, buf);
+}
+
+static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL);
+
+#ifdef CONFIG_DEBUG_FS
+static int codec_reg_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf,
+			       size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	struct snd_soc_codec *codec = file->private_data;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	ret = soc_codec_reg_show(codec, buf);
+	if (ret >= 0)
+		ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+	kfree(buf);
+	return ret;
+}
+
+static ssize_t codec_reg_write_file(struct file *file,
+		const char __user *user_buf, size_t count, loff_t *ppos)
+{
+	char buf[32];
+	int buf_size;
+	char *start = buf;
+	unsigned long reg, value;
+	int step = 1;
+	struct snd_soc_codec *codec = file->private_data;
+
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	if (codec->reg_cache_step)
+		step = codec->reg_cache_step;
+
+	while (*start == ' ')
+		start++;
+	reg = simple_strtoul(start, &start, 16);
+	if ((reg >= codec->reg_cache_size) || (reg % step))
+		return -EINVAL;
+	while (*start == ' ')
+		start++;
+	if (strict_strtoul(start, 16, &value))
+		return -EINVAL;
+	codec->write(codec, reg, value);
+	return buf_size;
+}
+
+static const struct file_operations codec_reg_fops = {
+	.open = codec_reg_open_file,
+	.read = codec_reg_read_file,
+	.write = codec_reg_write_file,
+};
+
+static void soc_init_codec_debugfs(struct snd_soc_codec *codec)
+{
+	char codec_root[128];
+
+	if (codec->dev)
+		snprintf(codec_root, sizeof(codec_root),
+			"%s.%s", codec->name, dev_name(codec->dev));
+	else
+		snprintf(codec_root, sizeof(codec_root),
+			"%s", codec->name);
+
+	codec->debugfs_codec_root = debugfs_create_dir(codec_root,
+						       debugfs_root);
+	if (!codec->debugfs_codec_root) {
+		printk(KERN_WARNING
+		       "ASoC: Failed to create codec debugfs directory\n");
+		return;
+	}
+
+	codec->debugfs_reg = debugfs_create_file("codec_reg", 0644,
+						 codec->debugfs_codec_root,
+						 codec, &codec_reg_fops);
+	if (!codec->debugfs_reg)
+		printk(KERN_WARNING
+		       "ASoC: Failed to create codec register debugfs file\n");
+
+	codec->debugfs_pop_time = debugfs_create_u32("dapm_pop_time", 0744,
+						     codec->debugfs_codec_root,
+						     &codec->pop_time);
+	if (!codec->debugfs_pop_time)
+		printk(KERN_WARNING
+		       "Failed to create pop time debugfs file\n");
+
+	codec->debugfs_dapm = debugfs_create_dir("dapm",
+						 codec->debugfs_codec_root);
+	if (!codec->debugfs_dapm)
+		printk(KERN_WARNING
+		       "Failed to create DAPM debugfs directory\n");
+
+	snd_soc_dapm_debugfs_init(codec);
+}
+
+static void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
+{
+	debugfs_remove_recursive(codec->debugfs_codec_root);
+}
+
+#else
+
+static inline void soc_init_codec_debugfs(struct snd_soc_codec *codec)
+{
+}
+
+static inline void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
+{
+}
+#endif
+
 #ifdef CONFIG_SND_SOC_AC97_BUS
 /* unregister ac97 codec */
 static int soc_ac97_dev_unregister(struct snd_soc_codec *codec)
@@ -790,45 +956,6 @@
 
 	return 0;
 }
-
-/**
- * snd_soc_suspend_device: Notify core of device suspend
- *
- * @dev: Device being suspended.
- *
- * In order to ensure that the entire audio subsystem is suspended in a
- * coordinated fashion ASoC devices should suspend themselves when
- * called by ASoC.  When the standard kernel suspend process asks the
- * device to suspend it should call this function to initiate a suspend
- * of the entire ASoC card.
- *
- * \note Currently this function is stubbed out.
- */
-int snd_soc_suspend_device(struct device *dev)
-{
-	return 0;
-}
-EXPORT_SYMBOL_GPL(snd_soc_suspend_device);
-
-/**
- * snd_soc_resume_device: Notify core of device resume
- *
- * @dev: Device being resumed.
- *
- * In order to ensure that the entire audio subsystem is resumed in a
- * coordinated fashion ASoC devices should resume themselves when called
- * by ASoC.  When the standard kernel resume process asks the device
- * to resume it should call this function.  Once all the components of
- * the card have notified that they are ready to be resumed the card
- * will be resumed.
- *
- * \note Currently this function is stubbed out.
- */
-int snd_soc_resume_device(struct device *dev)
-{
-	return 0;
-}
-EXPORT_SYMBOL_GPL(snd_soc_resume_device);
 #else
 #define soc_suspend	NULL
 #define soc_resume	NULL
@@ -843,6 +970,7 @@
 						    struct platform_device,
 						    dev);
 	struct snd_soc_codec_device *codec_dev = card->socdev->codec_dev;
+	struct snd_soc_codec *codec;
 	struct snd_soc_platform *platform;
 	struct snd_soc_dai *dai;
 	int i, found, ret, ac97;
@@ -931,6 +1059,7 @@
 		if (ret < 0)
 			goto cpu_dai_err;
 	}
+	codec = card->codec;
 
 	if (platform->probe) {
 		ret = platform->probe(pdev);
@@ -945,10 +1074,69 @@
 	INIT_WORK(&card->deferred_resume_work, soc_resume_deferred);
 #endif
 
+	for (i = 0; i < card->num_links; i++) {
+		if (card->dai_link[i].init) {
+			ret = card->dai_link[i].init(codec);
+			if (ret < 0) {
+				printk(KERN_ERR "asoc: failed to init %s\n",
+					card->dai_link[i].stream_name);
+				continue;
+			}
+		}
+		if (card->dai_link[i].codec_dai->ac97_control)
+			ac97 = 1;
+	}
+
+	snprintf(codec->card->shortname, sizeof(codec->card->shortname),
+		 "%s",  card->name);
+	snprintf(codec->card->longname, sizeof(codec->card->longname),
+		 "%s (%s)", card->name, codec->name);
+
+	/* Make sure all DAPM widgets are instantiated */
+	snd_soc_dapm_new_widgets(codec);
+
+	ret = snd_card_register(codec->card);
+	if (ret < 0) {
+		printk(KERN_ERR "asoc: failed to register soundcard for %s\n",
+				codec->name);
+		goto card_err;
+	}
+
+	mutex_lock(&codec->mutex);
+#ifdef CONFIG_SND_SOC_AC97_BUS
+	/* Only instantiate AC97 if not already done by the adaptor
+	 * for the generic AC97 subsystem.
+	 */
+	if (ac97 && strcmp(codec->name, "AC97") != 0) {
+		ret = soc_ac97_dev_register(codec);
+		if (ret < 0) {
+			printk(KERN_ERR "asoc: AC97 device register failed\n");
+			snd_card_free(codec->card);
+			mutex_unlock(&codec->mutex);
+			goto card_err;
+		}
+	}
+#endif
+
+	ret = snd_soc_dapm_sys_add(card->socdev->dev);
+	if (ret < 0)
+		printk(KERN_WARNING "asoc: failed to add dapm sysfs entries\n");
+
+	ret = device_create_file(card->socdev->dev, &dev_attr_codec_reg);
+	if (ret < 0)
+		printk(KERN_WARNING "asoc: failed to add codec sysfs files\n");
+
+	soc_init_codec_debugfs(codec);
+	mutex_unlock(&codec->mutex);
+
 	card->instantiated = 1;
 
 	return;
 
+card_err:
+	if (platform->remove)
+		platform->remove(pdev);
+
 platform_err:
 	if (codec_dev->remove)
 		codec_dev->remove(pdev);
@@ -1151,157 +1339,6 @@
 }
 EXPORT_SYMBOL_GPL(snd_soc_codec_volatile_register);
 
-/* codec register dump */
-static ssize_t soc_codec_reg_show(struct snd_soc_codec *codec, char *buf)
-{
-	int i, step = 1, count = 0;
-
-	if (!codec->reg_cache_size)
-		return 0;
-
-	if (codec->reg_cache_step)
-		step = codec->reg_cache_step;
-
-	count += sprintf(buf, "%s registers\n", codec->name);
-	for (i = 0; i < codec->reg_cache_size; i += step) {
-		if (codec->readable_register && !codec->readable_register(i))
-			continue;
-
-		count += sprintf(buf + count, "%2x: ", i);
-		if (count >= PAGE_SIZE - 1)
-			break;
-
-		if (codec->display_register)
-			count += codec->display_register(codec, buf + count,
-							 PAGE_SIZE - count, i);
-		else
-			count += snprintf(buf + count, PAGE_SIZE - count,
-					  "%4x", codec->read(codec, i));
-
-		if (count >= PAGE_SIZE - 1)
-			break;
-
-		count += snprintf(buf + count, PAGE_SIZE - count, "\n");
-		if (count >= PAGE_SIZE - 1)
-			break;
-	}
-
-	/* Truncate count; min() would cause a warning */
-	if (count >= PAGE_SIZE)
-		count = PAGE_SIZE - 1;
-
-	return count;
-}
-static ssize_t codec_reg_show(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	struct snd_soc_device *devdata = dev_get_drvdata(dev);
-	return soc_codec_reg_show(devdata->card->codec, buf);
-}
-
-static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL);
-
-#ifdef CONFIG_DEBUG_FS
-static int codec_reg_open_file(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
-static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf,
-			       size_t count, loff_t *ppos)
-{
-	ssize_t ret;
-	struct snd_soc_codec *codec = file->private_data;
-	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-	ret = soc_codec_reg_show(codec, buf);
-	if (ret >= 0)
-		ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
-	kfree(buf);
-	return ret;
-}
-
-static ssize_t codec_reg_write_file(struct file *file,
-		const char __user *user_buf, size_t count, loff_t *ppos)
-{
-	char buf[32];
-	int buf_size;
-	char *start = buf;
-	unsigned long reg, value;
-	int step = 1;
-	struct snd_soc_codec *codec = file->private_data;
-
-	buf_size = min(count, (sizeof(buf)-1));
-	if (copy_from_user(buf, user_buf, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	if (codec->reg_cache_step)
-		step = codec->reg_cache_step;
-
-	while (*start == ' ')
-		start++;
-	reg = simple_strtoul(start, &start, 16);
-	if ((reg >= codec->reg_cache_size) || (reg % step))
-		return -EINVAL;
-	while (*start == ' ')
-		start++;
-	if (strict_strtoul(start, 16, &value))
-		return -EINVAL;
-	codec->write(codec, reg, value);
-	return buf_size;
-}
-
-static const struct file_operations codec_reg_fops = {
-	.open = codec_reg_open_file,
-	.read = codec_reg_read_file,
-	.write = codec_reg_write_file,
-};
-
-static void soc_init_codec_debugfs(struct snd_soc_codec *codec)
-{
-	codec->debugfs_reg = debugfs_create_file("codec_reg", 0644,
-						 debugfs_root, codec,
-						 &codec_reg_fops);
-	if (!codec->debugfs_reg)
-		printk(KERN_WARNING
-		       "ASoC: Failed to create codec register debugfs file\n");
-
-	codec->debugfs_pop_time = debugfs_create_u32("dapm_pop_time", 0744,
-						     debugfs_root,
-						     &codec->pop_time);
-	if (!codec->debugfs_pop_time)
-		printk(KERN_WARNING
-		       "Failed to create pop time debugfs file\n");
-
-	codec->debugfs_dapm = debugfs_create_dir("dapm", debugfs_root);
-	if (!codec->debugfs_dapm)
-		printk(KERN_WARNING
-		       "Failed to create DAPM debugfs directory\n");
-
-	snd_soc_dapm_debugfs_init(codec);
-}
-
-static void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
-{
-	debugfs_remove_recursive(codec->debugfs_dapm);
-	debugfs_remove(codec->debugfs_pop_time);
-	debugfs_remove(codec->debugfs_reg);
-}
-
-#else
-
-static inline void soc_init_codec_debugfs(struct snd_soc_codec *codec)
-{
-}
-
-static inline void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
-{
-}
-#endif
-
 /**
  * snd_soc_new_ac97_codec - initailise AC97 device
  * @codec: audio codec
@@ -1369,19 +1406,41 @@
 	int change;
 	unsigned int old, new;
 
-	mutex_lock(&io_mutex);
 	old = snd_soc_read(codec, reg);
 	new = (old & ~mask) | value;
 	change = old != new;
 	if (change)
 		snd_soc_write(codec, reg, new);
 
-	mutex_unlock(&io_mutex);
 	return change;
 }
 EXPORT_SYMBOL_GPL(snd_soc_update_bits);
 
 /**
+ * snd_soc_update_bits_locked - update codec register bits
+ * @codec: audio codec
+ * @reg: codec register
+ * @mask: register mask
+ * @value: new value
+ *
+ * Writes new register value, and takes the codec mutex.
+ *
+ * Returns 1 for change else 0.
+ */
+static int snd_soc_update_bits_locked(struct snd_soc_codec *codec,
+				unsigned short reg, unsigned int mask,
+				unsigned int value)
+{
+	int change;
+
+	mutex_lock(&codec->mutex);
+	change = snd_soc_update_bits(codec, reg, mask, value);
+	mutex_unlock(&codec->mutex);
+
+	return change;
+}
+
+/**
  * snd_soc_test_bits - test register for change
  * @codec: audio codec
  * @reg: codec register
@@ -1399,11 +1458,9 @@
 	int change;
 	unsigned int old, new;
 
-	mutex_lock(&io_mutex);
 	old = snd_soc_read(codec, reg);
 	new = (old & ~mask) | value;
 	change = old != new;
-	mutex_unlock(&io_mutex);
 
 	return change;
 }
@@ -1450,6 +1507,10 @@
 			mutex_unlock(&codec->mutex);
 			return ret;
 		}
+		if (card->dai_link[i].codec_dai->ac97_control) {
+			snd_ac97_dev_add_pdata(codec->ac97,
+				card->dai_link[i].cpu_dai->ac97_pdata);
+		}
 	}
 
 	mutex_unlock(&codec->mutex);
@@ -1458,83 +1519,6 @@
 EXPORT_SYMBOL_GPL(snd_soc_new_pcms);
 
 /**
- * snd_soc_init_card - register sound card
- * @socdev: the SoC audio device
- *
- * Register a SoC sound card. Also registers an AC97 device if the
- * codec is AC97 for ad hoc devices.
- *
- * Returns 0 for success, else error.
- */
-int snd_soc_init_card(struct snd_soc_device *socdev)
-{
-	struct snd_soc_card *card = socdev->card;
-	struct snd_soc_codec *codec = card->codec;
-	int ret = 0, i, ac97 = 0, err = 0;
-
-	for (i = 0; i < card->num_links; i++) {
-		if (card->dai_link[i].init) {
-			err = card->dai_link[i].init(codec);
-			if (err < 0) {
-				printk(KERN_ERR "asoc: failed to init %s\n",
-					card->dai_link[i].stream_name);
-				continue;
-			}
-		}
-		if (card->dai_link[i].codec_dai->ac97_control) {
-			ac97 = 1;
-			snd_ac97_dev_add_pdata(codec->ac97,
-				card->dai_link[i].cpu_dai->ac97_pdata);
-		}
-	}
-	snprintf(codec->card->shortname, sizeof(codec->card->shortname),
-		 "%s",  card->name);
-	snprintf(codec->card->longname, sizeof(codec->card->longname),
-		 "%s (%s)", card->name, codec->name);
-
-	/* Make sure all DAPM widgets are instantiated */
-	snd_soc_dapm_new_widgets(codec);
-
-	ret = snd_card_register(codec->card);
-	if (ret < 0) {
-		printk(KERN_ERR "asoc: failed to register soundcard for %s\n",
-				codec->name);
-		goto out;
-	}
-
-	mutex_lock(&codec->mutex);
-#ifdef CONFIG_SND_SOC_AC97_BUS
-	/* Only instantiate AC97 if not already done by the adaptor
-	 * for the generic AC97 subsystem.
-	 */
-	if (ac97 && strcmp(codec->name, "AC97") != 0) {
-		ret = soc_ac97_dev_register(codec);
-		if (ret < 0) {
-			printk(KERN_ERR "asoc: AC97 device register failed\n");
-			snd_card_free(codec->card);
-			mutex_unlock(&codec->mutex);
-			goto out;
-		}
-	}
-#endif
-
-	err = snd_soc_dapm_sys_add(socdev->dev);
-	if (err < 0)
-		printk(KERN_WARNING "asoc: failed to add dapm sysfs entries\n");
-
-	err = device_create_file(socdev->dev, &dev_attr_codec_reg);
-	if (err < 0)
-		printk(KERN_WARNING "asoc: failed to add codec sysfs files\n");
-
-	soc_init_codec_debugfs(codec);
-	mutex_unlock(&codec->mutex);
-
-out:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(snd_soc_init_card);
-
-/**
  * snd_soc_free_pcms - free sound card and pcms
  * @socdev: the SoC audio device
  *
@@ -1734,7 +1718,7 @@
 		mask |= (bitmask - 1) << e->shift_r;
 	}
 
-	return snd_soc_update_bits(codec, e->reg, mask, val);
+	return snd_soc_update_bits_locked(codec, e->reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_enum_double);
 
@@ -1808,7 +1792,7 @@
 		mask |= e->mask << e->shift_r;
 	}
 
-	return snd_soc_update_bits(codec, e->reg, mask, val);
+	return snd_soc_update_bits_locked(codec, e->reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_value_enum_double);
 
@@ -1969,7 +1953,7 @@
 		val_mask |= mask << rshift;
 		val |= val2 << rshift;
 	}
-	return snd_soc_update_bits(codec, reg, val_mask, val);
+	return snd_soc_update_bits_locked(codec, reg, val_mask, val);
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_volsw);
 
@@ -2075,11 +2059,11 @@
 	val = val << shift;
 	val2 = val2 << shift;
 
-	err = snd_soc_update_bits(codec, reg, val_mask, val);
+	err = snd_soc_update_bits_locked(codec, reg, val_mask, val);
 	if (err < 0)
 		return err;
 
-	err = snd_soc_update_bits(codec, reg2, val_mask, val2);
+	err = snd_soc_update_bits_locked(codec, reg2, val_mask, val2);
 	return err;
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_volsw_2r);
@@ -2158,7 +2142,7 @@
 	val = (ucontrol->value.integer.value[0]+min) & 0xff;
 	val |= ((ucontrol->value.integer.value[1]+min) & 0xff) << 8;
 
-	return snd_soc_update_bits(codec, reg, 0xffff, val);
+	return snd_soc_update_bits_locked(codec, reg, 0xffff, val);
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8);
 
@@ -2205,16 +2189,18 @@
  * snd_soc_dai_set_pll - configure DAI PLL.
  * @dai: DAI
  * @pll_id: DAI specific PLL ID
+ * @source: DAI specific source for the PLL
  * @freq_in: PLL input clock frequency in Hz
  * @freq_out: requested PLL output clock frequency in Hz
  *
  * Configures and enables PLL to generate output clock based on input clock.
  */
-int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
-	int pll_id, unsigned int freq_in, unsigned int freq_out)
+int snd_soc_dai_set_pll(struct snd_soc_dai *dai, int pll_id, int source,
+	unsigned int freq_in, unsigned int freq_out)
 {
 	if (dai->ops && dai->ops->set_pll)
-		return dai->ops->set_pll(dai, pll_id, freq_in, freq_out);
+		return dai->ops->set_pll(dai, pll_id, source,
+					 freq_in, freq_out);
 	else
 		return -EINVAL;
 }
@@ -2259,6 +2245,30 @@
 EXPORT_SYMBOL_GPL(snd_soc_dai_set_tdm_slot);
 
 /**
+ * snd_soc_dai_set_channel_map - configure DAI audio channel map
+ * @dai: DAI
+ * @tx_num: how many TX channels
+ * @tx_slot: pointer to an array which imply the TX slot number channel
+ *           0~num-1 uses
+ * @rx_num: how many RX channels
+ * @rx_slot: pointer to an array which imply the RX slot number channel
+ *           0~num-1 uses
+ *
+ * configure the relationship between channel number and TDM slot number.
+ */
+int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai,
+	unsigned int tx_num, unsigned int *tx_slot,
+	unsigned int rx_num, unsigned int *rx_slot)
+{
+	if (dai->ops && dai->ops->set_channel_map)
+		return dai->ops->set_channel_map(dai, tx_num, tx_slot,
+			rx_num, rx_slot);
+	else
+		return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(snd_soc_dai_set_channel_map);
+
+/**
  * snd_soc_dai_set_tristate - configure DAI system or master clock.
  * @dai: DAI
  * @tristate: tristate enable
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index d89f6dc..0d294ef 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -719,6 +719,10 @@
 
 	/* Check if one of our outputs is connected */
 	list_for_each_entry(path, &w->sinks, list_source) {
+		if (path->connected &&
+		    !path->connected(path->source, path->sink))
+			continue;
+
 		if (path->sink && path->sink->power_check &&
 		    path->sink->power_check(path->sink)) {
 			power = 1;
@@ -973,9 +977,19 @@
 			if (!w->power_check)
 				continue;
 
-			power = w->power_check(w);
-			if (power)
-				sys_power = 1;
+			/* If we're suspending then pull down all the 
+			 * power. */
+			switch (event) {
+			case SND_SOC_DAPM_STREAM_SUSPEND:
+				power = 0;
+				break;
+
+			default:
+				power = w->power_check(w);
+				if (power)
+					sys_power = 1;
+				break;
+			}
 
 			if (w->power == power)
 				continue;
@@ -999,8 +1013,12 @@
 		case SND_SOC_DAPM_STREAM_RESUME:
 			sys_power = 1;
 			break;
+		case SND_SOC_DAPM_STREAM_SUSPEND:
+			sys_power = 0;
+			break;
 		case SND_SOC_DAPM_STREAM_NOP:
 			sys_power = codec->bias_level != SND_SOC_BIAS_STANDBY;
+			break;
 		default:
 			break;
 		}
@@ -1138,6 +1156,9 @@
 				w->active ? "active" : "inactive");
 
 	list_for_each_entry(p, &w->sources, list_sink) {
+		if (p->connected && !p->connected(w, p->sink))
+			continue;
+
 		if (p->connect)
 			ret += snprintf(buf + ret, PAGE_SIZE - ret,
 					" in  %s %s\n",
@@ -1145,6 +1166,9 @@
 					p->source->name);
 	}
 	list_for_each_entry(p, &w->sinks, list_source) {
+		if (p->connected && !p->connected(w, p->sink))
+			continue;
+
 		if (p->connect)
 			ret += snprintf(buf + ret, PAGE_SIZE - ret,
 					" out %s %s\n",
@@ -1192,8 +1216,8 @@
 
 /* test and update the power status of a mux widget */
 static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
-				 struct snd_kcontrol *kcontrol, int mask,
-				 int mux, int val, struct soc_enum *e)
+				 struct snd_kcontrol *kcontrol, int change,
+				 int mux, struct soc_enum *e)
 {
 	struct snd_soc_dapm_path *path;
 	int found = 0;
@@ -1202,7 +1226,7 @@
 	    widget->id != snd_soc_dapm_value_mux)
 		return -ENODEV;
 
-	if (!snd_soc_test_bits(widget->codec, e->reg, mask, val))
+	if (!change)
 		return 0;
 
 	/* find dapm widget path assoc with kcontrol */
@@ -1387,10 +1411,13 @@
 EXPORT_SYMBOL_GPL(snd_soc_dapm_sync);
 
 static int snd_soc_dapm_add_route(struct snd_soc_codec *codec,
-	const char *sink, const char *control, const char *source)
+				  const struct snd_soc_dapm_route *route)
 {
 	struct snd_soc_dapm_path *path;
 	struct snd_soc_dapm_widget *wsource = NULL, *wsink = NULL, *w;
+	const char *sink = route->sink;
+	const char *control = route->control;
+	const char *source = route->source;
 	int ret = 0;
 
 	/* find src and dest widgets */
@@ -1414,6 +1441,7 @@
 
 	path->source = wsource;
 	path->sink = wsink;
+	path->connected = route->connected;
 	INIT_LIST_HEAD(&path->list);
 	INIT_LIST_HEAD(&path->list_source);
 	INIT_LIST_HEAD(&path->list_sink);
@@ -1514,8 +1542,7 @@
 	int i, ret;
 
 	for (i = 0; i < num; i++) {
-		ret = snd_soc_dapm_add_route(codec, route->sink,
-					     route->control, route->source);
+		ret = snd_soc_dapm_add_route(codec, route);
 		if (ret < 0) {
 			printk(KERN_ERR "Failed to add route %s->%s\n",
 			       route->source,
@@ -1752,7 +1779,7 @@
 {
 	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
-	unsigned int val, mux;
+	unsigned int val, mux, change;
 	unsigned int mask, bitmask;
 	int ret = 0;
 
@@ -1772,20 +1799,21 @@
 
 	mutex_lock(&widget->codec->mutex);
 	widget->value = val;
-	dapm_mux_update_power(widget, kcontrol, mask, mux, val, e);
-	if (widget->event) {
-		if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
-			ret = widget->event(widget,
-				kcontrol, SND_SOC_DAPM_PRE_REG);
-			if (ret < 0)
-				goto out;
-		}
-		ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
-		if (widget->event_flags & SND_SOC_DAPM_POST_REG)
-			ret = widget->event(widget,
-				kcontrol, SND_SOC_DAPM_POST_REG);
-	} else
-		ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
+	change = snd_soc_test_bits(widget->codec, e->reg, mask, val);
+	dapm_mux_update_power(widget, kcontrol, change, mux, e);
+
+	if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
+		ret = widget->event(widget,
+				    kcontrol, SND_SOC_DAPM_PRE_REG);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
+
+	if (widget->event_flags & SND_SOC_DAPM_POST_REG)
+		ret = widget->event(widget,
+				    kcontrol, SND_SOC_DAPM_POST_REG);
 
 out:
 	mutex_unlock(&widget->codec->mutex);
@@ -1794,6 +1822,54 @@
 EXPORT_SYMBOL_GPL(snd_soc_dapm_put_enum_double);
 
 /**
+ * snd_soc_dapm_get_enum_virt - Get virtual DAPM mux
+ * @kcontrol: mixer control
+ * @ucontrol: control element information
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_dapm_get_enum_virt(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+
+	ucontrol->value.enumerated.item[0] = widget->value;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_dapm_get_enum_virt);
+
+/**
+ * snd_soc_dapm_put_enum_virt - Set virtual DAPM mux
+ * @kcontrol: mixer control
+ * @ucontrol: control element information
+ *
+ * Returns 0 for success.
+ */
+int snd_soc_dapm_put_enum_virt(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
+	struct soc_enum *e =
+		(struct soc_enum *)kcontrol->private_value;
+	int change;
+	int ret = 0;
+
+	if (ucontrol->value.enumerated.item[0] >= e->max)
+		return -EINVAL;
+
+	mutex_lock(&widget->codec->mutex);
+
+	change = widget->value != ucontrol->value.enumerated.item[0];
+	widget->value = ucontrol->value.enumerated.item[0];
+	dapm_mux_update_power(widget, kcontrol, change, widget->value, e);
+
+	mutex_unlock(&widget->codec->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(snd_soc_dapm_put_enum_virt);
+
+/**
  * snd_soc_dapm_get_value_enum_double - dapm semi enumerated double mixer get
  *					callback
  * @kcontrol: mixer control
@@ -1851,7 +1927,7 @@
 {
 	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
-	unsigned int val, mux;
+	unsigned int val, mux, change;
 	unsigned int mask;
 	int ret = 0;
 
@@ -1869,20 +1945,21 @@
 
 	mutex_lock(&widget->codec->mutex);
 	widget->value = val;
-	dapm_mux_update_power(widget, kcontrol, mask, mux, val, e);
-	if (widget->event) {
-		if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
-			ret = widget->event(widget,
-				kcontrol, SND_SOC_DAPM_PRE_REG);
-			if (ret < 0)
-				goto out;
-		}
-		ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
-		if (widget->event_flags & SND_SOC_DAPM_POST_REG)
-			ret = widget->event(widget,
-				kcontrol, SND_SOC_DAPM_POST_REG);
-	} else
-		ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
+	change = snd_soc_test_bits(widget->codec, e->reg, mask, val);
+	dapm_mux_update_power(widget, kcontrol, change, mux, e);
+
+	if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
+		ret = widget->event(widget,
+				    kcontrol, SND_SOC_DAPM_PRE_REG);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = snd_soc_update_bits(widget->codec, e->reg, mask, val);
+
+	if (widget->event_flags & SND_SOC_DAPM_POST_REG)
+		ret = widget->event(widget,
+				    kcontrol, SND_SOC_DAPM_POST_REG);
 
 out:
 	mutex_unlock(&widget->codec->mutex);
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 1d455ab7..3c07a94 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -58,7 +58,7 @@
  */
 void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask)
 {
-	struct snd_soc_codec *codec = jack->card->codec;
+	struct snd_soc_codec *codec;
 	struct snd_soc_jack_pin *pin;
 	int enable;
 	int oldstatus;
@@ -67,6 +67,7 @@
 		WARN_ON_ONCE(!jack);
 		return;
 	}
+	codec = jack->card->codec;
 
 	mutex_lock(&codec->mutex);
 
@@ -162,6 +163,9 @@
 	else
 		report = 0;
 
+	if (gpio->jack_status_check)
+		report = gpio->jack_status_check();
+
 	snd_soc_jack_report(jack, report, gpio->report);
 }
 
diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c
new file mode 100644
index 0000000..1d07b93
--- /dev/null
+++ b/sound/soc/soc-utils.c
@@ -0,0 +1,74 @@
+/*
+ * soc-util.c  --  ALSA SoC Audio Layer utility functions
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *         Liam Girdwood <lrg@slimlogic.co.uk>
+ *         
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots)
+{
+	return sample_size * channels * tdm_slots;
+}
+EXPORT_SYMBOL_GPL(snd_soc_calc_frame_size);
+
+int snd_soc_params_to_frame_size(struct snd_pcm_hw_params *params)
+{
+	int sample_size;
+
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+	case SNDRV_PCM_FORMAT_S16_BE:
+		sample_size = 16;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+	case SNDRV_PCM_FORMAT_S20_3BE:
+		sample_size = 20;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+	case SNDRV_PCM_FORMAT_S24_BE:
+		sample_size = 24;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+	case SNDRV_PCM_FORMAT_S32_BE:
+		sample_size = 32;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return snd_soc_calc_frame_size(sample_size, params_channels(params),
+				       1);
+}
+EXPORT_SYMBOL_GPL(snd_soc_params_to_frame_size);
+
+int snd_soc_calc_bclk(int fs, int sample_size, int channels, int tdm_slots)
+{
+	return fs * snd_soc_calc_frame_size(sample_size, channels, tdm_slots);
+}
+EXPORT_SYMBOL_GPL(snd_soc_calc_bclk);
+
+int snd_soc_params_to_bclk(struct snd_pcm_hw_params *params)
+{
+	int ret;
+
+	ret = snd_soc_params_to_frame_size(params);
+
+	if (ret > 0)
+		return ret * params_rate(params);
+	else
+		return ret;
+}
+EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 8db0374..b074a59 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -2893,7 +2893,9 @@
 		if ((altsd->bInterfaceClass == USB_CLASS_AUDIO ||
 		     altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC) &&
 		    altsd->bInterfaceSubClass == USB_SUBCLASS_MIDI_STREAMING) {
-			if (snd_usb_create_midi_interface(chip, iface, NULL) < 0) {
+			int err = snd_usbmidi_create(chip->card, iface,
+						     &chip->midi_list, NULL);
+			if (err < 0) {
 				snd_printk(KERN_ERR "%d:%u:%d: cannot create sequencer device\n", dev->devnum, ctrlif, j);
 				continue;
 			}
@@ -3038,12 +3040,11 @@
 			.type = QUIRK_MIDI_FIXED_ENDPOINT,
 			.data = &uaxx_ep
 		};
-		if (chip->usb_id == USB_ID(0x0582, 0x002b))
-			return snd_usb_create_midi_interface(chip, iface,
-							     &ua700_quirk);
-		else
-			return snd_usb_create_midi_interface(chip, iface,
-							     &uaxx_quirk);
+		const struct snd_usb_audio_quirk *quirk =
+			chip->usb_id == USB_ID(0x0582, 0x002b)
+			? &ua700_quirk : &uaxx_quirk;
+		return snd_usbmidi_create(chip->card, iface,
+					  &chip->midi_list, quirk);
 	}
 
 	if (altsd->bNumEndpoints != 1)
@@ -3370,6 +3371,13 @@
 	return 0; /* keep this altsetting */
 }
 
+static int create_any_midi_quirk(struct snd_usb_audio *chip,
+				 struct usb_interface *intf,
+				 const struct snd_usb_audio_quirk *quirk)
+{
+	return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
+}
+
 /*
  * audio-interface quirks
  *
@@ -3387,14 +3395,14 @@
 	static const quirk_func_t quirk_funcs[] = {
 		[QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
 		[QUIRK_COMPOSITE] = create_composite_quirk,
-		[QUIRK_MIDI_STANDARD_INTERFACE] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_FIXED_ENDPOINT] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
-		[QUIRK_MIDI_CME] = snd_usb_create_midi_interface,
+		[QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
+		[QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
+		[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
+		[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
+		[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
+		[QUIRK_MIDI_FASTLANE] = create_any_midi_quirk,
+		[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
+		[QUIRK_MIDI_CME] = create_any_midi_quirk,
 		[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
 		[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
 		[QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index e9a3a9d..40ba811 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -132,7 +132,6 @@
 	int pcm_devs;
 
 	struct list_head midi_list;	/* list of midi interfaces */
-	int next_midi_device;
 
 	struct list_head mixer_list;	/* list of mixer interfaces */
 };
@@ -227,8 +226,10 @@
 			 int ignore_error);
 void snd_usb_mixer_disconnect(struct list_head *p);
 
-int snd_usb_create_midi_interface(struct snd_usb_audio *chip, struct usb_interface *iface,
-				  const struct snd_usb_audio_quirk *quirk);
+int snd_usbmidi_create(struct snd_card *card,
+		       struct usb_interface *iface,
+		       struct list_head *midi_list,
+		       const struct snd_usb_audio_quirk *quirk);
 void snd_usbmidi_input_stop(struct list_head* p);
 void snd_usbmidi_input_start(struct list_head* p);
 void snd_usbmidi_disconnect(struct list_head *p);
diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c
index 0eff19c..6e89b83 100644
--- a/sound/usb/usbmidi.c
+++ b/sound/usb/usbmidi.c
@@ -1,7 +1,7 @@
 /*
  * usbmidi.c - ALSA USB MIDI driver
  *
- * Copyright (c) 2002-2007 Clemens Ladisch
+ * Copyright (c) 2002-2009 Clemens Ladisch
  * All rights reserved.
  *
  * Based on the OSS usb-midi driver by NAGANO Daisuke,
@@ -47,6 +47,7 @@
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <sound/core.h>
+#include <sound/control.h>
 #include <sound/rawmidi.h>
 #include <sound/asequencer.h>
 #include "usbaudio.h"
@@ -101,7 +102,8 @@
 };
 
 struct snd_usb_midi {
-	struct snd_usb_audio *chip;
+	struct usb_device *dev;
+	struct snd_card *card;
 	struct usb_interface *iface;
 	const struct snd_usb_audio_quirk *quirk;
 	struct snd_rawmidi *rmidi;
@@ -109,13 +111,19 @@
 	struct list_head list;
 	struct timer_list error_timer;
 	spinlock_t disc_lock;
+	struct mutex mutex;
+	u32 usb_id;
+	int next_midi_device;
 
 	struct snd_usb_midi_endpoint {
 		struct snd_usb_midi_out_endpoint *out;
 		struct snd_usb_midi_in_endpoint *in;
 	} endpoints[MIDI_MAX_ENDPOINTS];
 	unsigned long input_triggered;
+	unsigned int opened;
 	unsigned char disconnected;
+
+	struct snd_kcontrol *roland_load_ctl;
 };
 
 struct snd_usb_midi_out_endpoint {
@@ -255,7 +263,7 @@
 		}
 	}
 
-	urb->dev = ep->umidi->chip->dev;
+	urb->dev = ep->umidi->dev;
 	snd_usbmidi_submit_urb(urb, GFP_ATOMIC);
 }
 
@@ -296,7 +304,7 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&ep->buffer_lock, flags);
-	if (ep->umidi->chip->shutdown) {
+	if (ep->umidi->disconnected) {
 		spin_unlock_irqrestore(&ep->buffer_lock, flags);
 		return;
 	}
@@ -312,7 +320,7 @@
 
 			dump_urb("sending", urb->transfer_buffer,
 				 urb->transfer_buffer_length);
-			urb->dev = ep->umidi->chip->dev;
+			urb->dev = ep->umidi->dev;
 			if (snd_usbmidi_submit_urb(urb, GFP_ATOMIC) < 0)
 				break;
 			ep->active_urbs |= 1 << urb_index;
@@ -349,7 +357,7 @@
 		if (in && in->error_resubmit) {
 			in->error_resubmit = 0;
 			for (j = 0; j < INPUT_URBS; ++j) {
-				in->urbs[j]->dev = umidi->chip->dev;
+				in->urbs[j]->dev = umidi->dev;
 				snd_usbmidi_submit_urb(in->urbs[j], GFP_ATOMIC);
 			}
 		}
@@ -369,7 +377,7 @@
 		return -ENOMEM;
 	dump_urb("sending", buf, len);
 	if (ep->urbs[0].urb)
-		err = usb_bulk_msg(ep->umidi->chip->dev, ep->urbs[0].urb->pipe,
+		err = usb_bulk_msg(ep->umidi->dev, ep->urbs[0].urb->pipe,
 				   buf, len, NULL, 250);
 	kfree(buf);
 	return err;
@@ -724,8 +732,7 @@
 
 	if (!ep->ports[0].active)
 		return;
-	count = snd_usb_get_speed(ep->umidi->chip->dev) == USB_SPEED_HIGH
-		? 1 : 2;
+	count = snd_usb_get_speed(ep->umidi->dev) == USB_SPEED_HIGH ? 1 : 2;
 	count = snd_rawmidi_transmit(ep->ports[0].substream,
 				     urb->transfer_buffer,
 				     count);
@@ -879,6 +886,50 @@
 };
 
 
+static void update_roland_altsetting(struct snd_usb_midi* umidi)
+{
+	struct usb_interface *intf;
+	struct usb_host_interface *hostif;
+	struct usb_interface_descriptor *intfd;
+	int is_light_load;
+
+	intf = umidi->iface;
+	is_light_load = intf->cur_altsetting != intf->altsetting;
+	if (umidi->roland_load_ctl->private_value == is_light_load)
+		return;
+	hostif = &intf->altsetting[umidi->roland_load_ctl->private_value];
+	intfd = get_iface_desc(hostif);
+	snd_usbmidi_input_stop(&umidi->list);
+	usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
+			  intfd->bAlternateSetting);
+	snd_usbmidi_input_start(&umidi->list);
+}
+
+static void substream_open(struct snd_rawmidi_substream *substream, int open)
+{
+	struct snd_usb_midi* umidi = substream->rmidi->private_data;
+	struct snd_kcontrol *ctl;
+
+	mutex_lock(&umidi->mutex);
+	if (open) {
+		if (umidi->opened++ == 0 && umidi->roland_load_ctl) {
+			ctl = umidi->roland_load_ctl;
+			ctl->vd[0].access |= SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+			snd_ctl_notify(umidi->card,
+				       SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
+			update_roland_altsetting(umidi);
+		}
+	} else {
+		if (--umidi->opened == 0 && umidi->roland_load_ctl) {
+			ctl = umidi->roland_load_ctl;
+			ctl->vd[0].access &= ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+			snd_ctl_notify(umidi->card,
+				       SNDRV_CTL_EVENT_MASK_INFO, &ctl->id);
+		}
+	}
+	mutex_unlock(&umidi->mutex);
+}
+
 static int snd_usbmidi_output_open(struct snd_rawmidi_substream *substream)
 {
 	struct snd_usb_midi* umidi = substream->rmidi->private_data;
@@ -898,11 +949,13 @@
 	}
 	substream->runtime->private_data = port;
 	port->state = STATE_UNKNOWN;
+	substream_open(substream, 1);
 	return 0;
 }
 
 static int snd_usbmidi_output_close(struct snd_rawmidi_substream *substream)
 {
+	substream_open(substream, 0);
 	return 0;
 }
 
@@ -912,7 +965,7 @@
 
 	port->active = up;
 	if (up) {
-		if (port->ep->umidi->chip->shutdown) {
+		if (port->ep->umidi->disconnected) {
 			/* gobble up remaining bytes to prevent wait in
 			 * snd_rawmidi_drain_output */
 			while (!snd_rawmidi_transmit_empty(substream))
@@ -954,11 +1007,13 @@
 
 static int snd_usbmidi_input_open(struct snd_rawmidi_substream *substream)
 {
+	substream_open(substream, 1);
 	return 0;
 }
 
 static int snd_usbmidi_input_close(struct snd_rawmidi_substream *substream)
 {
+	substream_open(substream, 0);
 	return 0;
 }
 
@@ -988,7 +1043,7 @@
 static void free_urb_and_buffer(struct snd_usb_midi *umidi, struct urb *urb,
 				unsigned int buffer_length)
 {
-	usb_buffer_free(umidi->chip->dev, buffer_length,
+	usb_buffer_free(umidi->dev, buffer_length,
 			urb->transfer_buffer, urb->transfer_dma);
 	usb_free_urb(urb);
 }
@@ -1035,24 +1090,24 @@
 		}
 	}
 	if (ep_info->in_interval)
-		pipe = usb_rcvintpipe(umidi->chip->dev, ep_info->in_ep);
+		pipe = usb_rcvintpipe(umidi->dev, ep_info->in_ep);
 	else
-		pipe = usb_rcvbulkpipe(umidi->chip->dev, ep_info->in_ep);
-	length = usb_maxpacket(umidi->chip->dev, pipe, 0);
+		pipe = usb_rcvbulkpipe(umidi->dev, ep_info->in_ep);
+	length = usb_maxpacket(umidi->dev, pipe, 0);
 	for (i = 0; i < INPUT_URBS; ++i) {
-		buffer = usb_buffer_alloc(umidi->chip->dev, length, GFP_KERNEL,
+		buffer = usb_buffer_alloc(umidi->dev, length, GFP_KERNEL,
 					  &ep->urbs[i]->transfer_dma);
 		if (!buffer) {
 			snd_usbmidi_in_endpoint_delete(ep);
 			return -ENOMEM;
 		}
 		if (ep_info->in_interval)
-			usb_fill_int_urb(ep->urbs[i], umidi->chip->dev,
+			usb_fill_int_urb(ep->urbs[i], umidi->dev,
 					 pipe, buffer, length,
 					 snd_usbmidi_in_urb_complete,
 					 ep, ep_info->in_interval);
 		else
-			usb_fill_bulk_urb(ep->urbs[i], umidi->chip->dev,
+			usb_fill_bulk_urb(ep->urbs[i], umidi->dev,
 					  pipe, buffer, length,
 					  snd_usbmidi_in_urb_complete, ep);
 		ep->urbs[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
@@ -1062,15 +1117,6 @@
 	return 0;
 }
 
-static unsigned int snd_usbmidi_count_bits(unsigned int x)
-{
-	unsigned int bits;
-
-	for (bits = 0; x; ++bits)
-		x &= x - 1;
-	return bits;
-}
-
 /*
  * Frees an output endpoint.
  * May be called when ep hasn't been initialized completely.
@@ -1113,15 +1159,15 @@
 		ep->urbs[i].ep = ep;
 	}
 	if (ep_info->out_interval)
-		pipe = usb_sndintpipe(umidi->chip->dev, ep_info->out_ep);
+		pipe = usb_sndintpipe(umidi->dev, ep_info->out_ep);
 	else
-		pipe = usb_sndbulkpipe(umidi->chip->dev, ep_info->out_ep);
-	if (umidi->chip->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
+		pipe = usb_sndbulkpipe(umidi->dev, ep_info->out_ep);
+	if (umidi->usb_id == USB_ID(0x0a92, 0x1020)) /* ESI M4U */
 		ep->max_transfer = 4;
 	else
-		ep->max_transfer = usb_maxpacket(umidi->chip->dev, pipe, 1);
+		ep->max_transfer = usb_maxpacket(umidi->dev, pipe, 1);
 	for (i = 0; i < OUTPUT_URBS; ++i) {
-		buffer = usb_buffer_alloc(umidi->chip->dev,
+		buffer = usb_buffer_alloc(umidi->dev,
 					  ep->max_transfer, GFP_KERNEL,
 					  &ep->urbs[i].urb->transfer_dma);
 		if (!buffer) {
@@ -1129,12 +1175,12 @@
 			return -ENOMEM;
 		}
 		if (ep_info->out_interval)
-			usb_fill_int_urb(ep->urbs[i].urb, umidi->chip->dev,
+			usb_fill_int_urb(ep->urbs[i].urb, umidi->dev,
 					 pipe, buffer, ep->max_transfer,
 					 snd_usbmidi_out_urb_complete,
 					 &ep->urbs[i], ep_info->out_interval);
 		else
-			usb_fill_bulk_urb(ep->urbs[i].urb, umidi->chip->dev,
+			usb_fill_bulk_urb(ep->urbs[i].urb, umidi->dev,
 					  pipe, buffer, ep->max_transfer,
 					  snd_usbmidi_out_urb_complete,
 					  &ep->urbs[i]);
@@ -1172,6 +1218,7 @@
 		if (ep->in)
 			snd_usbmidi_in_endpoint_delete(ep->in);
 	}
+	mutex_destroy(&umidi->mutex);
 	kfree(umidi);
 }
 
@@ -1367,7 +1414,7 @@
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(snd_usbmidi_port_info); ++i) {
-		if (snd_usbmidi_port_info[i].id == umidi->chip->usb_id &&
+		if (snd_usbmidi_port_info[i].id == umidi->usb_id &&
 		    snd_usbmidi_port_info[i].port == number)
 			return &snd_usbmidi_port_info[i];
 	}
@@ -1405,7 +1452,7 @@
 	port_info = find_port_info(umidi, number);
 	name_format = port_info ? port_info->name : "%s MIDI %d";
 	snprintf(substream->name, sizeof(substream->name),
-		 name_format, umidi->chip->card->shortname, number + 1);
+		 name_format, umidi->card->shortname, number + 1);
 
 	*rsubstream = substream;
 }
@@ -1503,7 +1550,7 @@
 			endpoints[epidx].out_ep = usb_endpoint_num(ep);
 			if (usb_endpoint_xfer_int(ep))
 				endpoints[epidx].out_interval = ep->bInterval;
-			else if (snd_usb_get_speed(umidi->chip->dev) == USB_SPEED_LOW)
+			else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
 				/*
 				 * Low speed bulk transfers don't exist, so
 				 * force interrupt transfers for devices like
@@ -1523,7 +1570,7 @@
 			endpoints[epidx].in_ep = usb_endpoint_num(ep);
 			if (usb_endpoint_xfer_int(ep))
 				endpoints[epidx].in_interval = ep->bInterval;
-			else if (snd_usb_get_speed(umidi->chip->dev) == USB_SPEED_LOW)
+			else if (snd_usb_get_speed(umidi->dev) == USB_SPEED_LOW)
 				endpoints[epidx].in_interval = 1;
 			endpoints[epidx].in_cables = (1 << ms_ep->bNumEmbMIDIJack) - 1;
 			snd_printdd(KERN_INFO "EP %02X: %d jack(s)\n",
@@ -1533,6 +1580,52 @@
 	return 0;
 }
 
+static int roland_load_info(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_info *info)
+{
+	static const char *const names[] = { "High Load", "Light Load" };
+
+	info->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	info->count = 1;
+	info->value.enumerated.items = 2;
+	if (info->value.enumerated.item > 1)
+		info->value.enumerated.item = 1;
+	strcpy(info->value.enumerated.name, names[info->value.enumerated.item]);
+	return 0;
+}
+
+static int roland_load_get(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *value)
+{
+	value->value.enumerated.item[0] = kcontrol->private_value;
+	return 0;
+}
+
+static int roland_load_put(struct snd_kcontrol *kcontrol,
+			   struct snd_ctl_elem_value *value)
+{
+	struct snd_usb_midi* umidi = kcontrol->private_data;
+	int changed;
+
+	if (value->value.enumerated.item[0] > 1)
+		return -EINVAL;
+	mutex_lock(&umidi->mutex);
+	changed = value->value.enumerated.item[0] != kcontrol->private_value;
+	if (changed)
+		kcontrol->private_value = value->value.enumerated.item[0];
+	mutex_unlock(&umidi->mutex);
+	return changed;
+}
+
+static struct snd_kcontrol_new roland_load_ctl = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "MIDI Input Mode",
+	.info = roland_load_info,
+	.get = roland_load_get,
+	.put = roland_load_put,
+	.private_value = 1,
+};
+
 /*
  * On Roland devices, use the second alternate setting to be able to use
  * the interrupt input endpoint.
@@ -1556,8 +1649,12 @@
 
 	snd_printdd(KERN_INFO "switching to altsetting %d with int ep\n",
 		    intfd->bAlternateSetting);
-	usb_set_interface(umidi->chip->dev, intfd->bInterfaceNumber,
+	usb_set_interface(umidi->dev, intfd->bInterfaceNumber,
 			  intfd->bAlternateSetting);
+
+	umidi->roland_load_ctl = snd_ctl_new1(&roland_load_ctl, umidi);
+	if (snd_ctl_add(umidi->card, umidi->roland_load_ctl) < 0)
+		umidi->roland_load_ctl = NULL;
 }
 
 /*
@@ -1573,7 +1670,7 @@
 	struct usb_endpoint_descriptor* epd;
 	int i, out_eps = 0, in_eps = 0;
 
-	if (USB_ID_VENDOR(umidi->chip->usb_id) == 0x0582)
+	if (USB_ID_VENDOR(umidi->usb_id) == 0x0582)
 		snd_usbmidi_switch_roland_altsetting(umidi);
 
 	if (endpoint[0].out_ep || endpoint[0].in_ep)
@@ -1760,12 +1857,12 @@
 	struct snd_rawmidi *rmidi;
 	int err;
 
-	err = snd_rawmidi_new(umidi->chip->card, "USB MIDI",
-			      umidi->chip->next_midi_device++,
+	err = snd_rawmidi_new(umidi->card, "USB MIDI",
+			      umidi->next_midi_device++,
 			      out_ports, in_ports, &rmidi);
 	if (err < 0)
 		return err;
-	strcpy(rmidi->name, umidi->chip->card->shortname);
+	strcpy(rmidi->name, umidi->card->shortname);
 	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
 			    SNDRV_RAWMIDI_INFO_INPUT |
 			    SNDRV_RAWMIDI_INFO_DUPLEX;
@@ -1804,7 +1901,7 @@
 		return;
 	for (i = 0; i < INPUT_URBS; ++i) {
 		struct urb* urb = ep->urbs[i];
-		urb->dev = ep->umidi->chip->dev;
+		urb->dev = ep->umidi->dev;
 		snd_usbmidi_submit_urb(urb, GFP_KERNEL);
 	}
 }
@@ -1825,9 +1922,10 @@
 /*
  * Creates and registers everything needed for a MIDI streaming interface.
  */
-int snd_usb_create_midi_interface(struct snd_usb_audio* chip,
-				  struct usb_interface* iface,
-				  const struct snd_usb_audio_quirk* quirk)
+int snd_usbmidi_create(struct snd_card *card,
+		       struct usb_interface* iface,
+		       struct list_head *midi_list,
+		       const struct snd_usb_audio_quirk* quirk)
 {
 	struct snd_usb_midi* umidi;
 	struct snd_usb_midi_endpoint_info endpoints[MIDI_MAX_ENDPOINTS];
@@ -1837,12 +1935,16 @@
 	umidi = kzalloc(sizeof(*umidi), GFP_KERNEL);
 	if (!umidi)
 		return -ENOMEM;
-	umidi->chip = chip;
+	umidi->dev = interface_to_usbdev(iface);
+	umidi->card = card;
 	umidi->iface = iface;
 	umidi->quirk = quirk;
 	umidi->usb_protocol_ops = &snd_usbmidi_standard_ops;
 	init_timer(&umidi->error_timer);
 	spin_lock_init(&umidi->disc_lock);
+	mutex_init(&umidi->mutex);
+	umidi->usb_id = USB_ID(le16_to_cpu(umidi->dev->descriptor.idVendor),
+			       le16_to_cpu(umidi->dev->descriptor.idProduct));
 	umidi->error_timer.function = snd_usbmidi_error_timer;
 	umidi->error_timer.data = (unsigned long)umidi;
 
@@ -1851,7 +1953,7 @@
 	switch (quirk ? quirk->type : QUIRK_MIDI_STANDARD_INTERFACE) {
 	case QUIRK_MIDI_STANDARD_INTERFACE:
 		err = snd_usbmidi_get_ms_info(umidi, endpoints);
-		if (chip->usb_id == USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
+		if (umidi->usb_id == USB_ID(0x0763, 0x0150)) /* M-Audio Uno */
 			umidi->usb_protocol_ops =
 				&snd_usbmidi_maudio_broken_running_status_ops;
 		break;
@@ -1887,7 +1989,7 @@
 		 * interface 0, so we have to make sure that the USB core looks
 		 * again at interface 0 by calling usb_set_interface() on it.
 		 */
-		usb_set_interface(umidi->chip->dev, 0, 0);
+		usb_set_interface(umidi->dev, 0, 0);
 		err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
 		break;
 	case QUIRK_MIDI_EMAGIC:
@@ -1914,8 +2016,8 @@
 	out_ports = 0;
 	in_ports = 0;
 	for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
-		out_ports += snd_usbmidi_count_bits(endpoints[i].out_cables);
-		in_ports += snd_usbmidi_count_bits(endpoints[i].in_cables);
+		out_ports += hweight16(endpoints[i].out_cables);
+		in_ports += hweight16(endpoints[i].in_cables);
 	}
 	err = snd_usbmidi_create_rawmidi(umidi, out_ports, in_ports);
 	if (err < 0) {
@@ -1933,14 +2035,14 @@
 		return err;
 	}
 
-	list_add(&umidi->list, &umidi->chip->midi_list);
+	list_add_tail(&umidi->list, midi_list);
 
 	for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i)
 		snd_usbmidi_input_start_ep(umidi->endpoints[i].in);
 	return 0;
 }
 
-EXPORT_SYMBOL(snd_usb_create_midi_interface);
+EXPORT_SYMBOL(snd_usbmidi_create);
 EXPORT_SYMBOL(snd_usbmidi_input_stop);
 EXPORT_SYMBOL(snd_usbmidi_input_start);
 EXPORT_SYMBOL(snd_usbmidi_disconnect);
diff --git a/sound/usb/usbmixer_maps.c b/sound/usb/usbmixer_maps.c
index 3e5d66c..77c3588 100644
--- a/sound/usb/usbmixer_maps.c
+++ b/sound/usb/usbmixer_maps.c
@@ -277,6 +277,22 @@
 	{ 0 } /* terminator */
 };
 
+/* "Gamesurround Muse Pocket LT" looks same like "Sound Blaster MP3+"
+ *  most importand difference is SU[8], it should be set to "Capture Source"
+ *  to make alsamixer and PA working properly.
+ *  FIXME: or mp3plus_map should use "Capture Source" too,
+ *  so this maps can be merget
+ */
+static struct usbmix_name_map hercules_usb51_map[] = {
+	{ 8, "Capture Source" },	/* SU, default "PCM Capture Source" */
+	{ 9, "Master Playback" },	/* FU, default "Speaker Playback" */
+	{ 10, "Mic Boost", 7 },		/* FU, default "Auto Gain Input" */
+	{ 11, "Line Capture" },		/* FU, default "PCM Capture" */
+	{ 13, "Mic Bypass Playback" },	/* FU, default "Mic Playback" */
+	{ 14, "Line Bypass Playback" },	/* FU, default "Line Playback" */
+	{ 0 }				/* terminator */
+};
+
 /*
  * Control map entries
  */
@@ -316,6 +332,13 @@
 		.ignore_ctl_error = 1,
 	},
 	{
+		/* Hercules Gamesurround Muse Pocket LT
+		 * (USB 5.1 Channel Audio Adapter)
+		 */
+		.id = USB_ID(0x06f8, 0xc000),
+		.map = hercules_usb51_map,
+	},
+	{
 		.id = USB_ID(0x08bb, 0x2702),
 		.map = linex_map,
 		.ignore_ctl_error = 1,
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index f6f201e..a892bda 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1563,6 +1563,29 @@
 		}
 	}
 },
+{
+	/* has ID 0x00ea when not in Advanced Driver mode */
+	USB_DEVICE_VENDOR_SPEC(0x0582, 0x00e9),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		/* .vendor_name = "Roland", */
+		/* .product_name = "UA-1G", */
+		.ifnum = QUIRK_ANY_INTERFACE,
+		.type = QUIRK_COMPOSITE,
+		.data = (const struct snd_usb_audio_quirk[]) {
+			{
+				.ifnum = 0,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = 1,
+				.type = QUIRK_AUDIO_STANDARD_INTERFACE
+			},
+			{
+				.ifnum = -1
+			}
+		}
+	}
+},
 
 /* Guillemot devices */
 {
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 99f3376..f71cd28 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -59,11 +59,33 @@
 		.type = QUIRK_MIDI_US122L,
 		.data = &quirk_data
 	};
-	struct usb_device *dev = US122L(card)->chip.dev;
+	struct usb_device *dev = US122L(card)->dev;
 	struct usb_interface *iface = usb_ifnum_to_if(dev, 1);
 
-	return snd_usb_create_midi_interface(&US122L(card)->chip,
-					     iface, &quirk);
+	return snd_usbmidi_create(card, iface,
+				  &US122L(card)->midi_list, &quirk);
+}
+
+static int us144_create_usbmidi(struct snd_card *card)
+{
+	static struct snd_usb_midi_endpoint_info quirk_data = {
+		.out_ep = 4,
+		.in_ep = 3,
+		.out_cables =	0x001,
+		.in_cables =	0x001
+	};
+	static struct snd_usb_audio_quirk quirk = {
+		.vendor_name =	"US144",
+		.product_name =	NAME_ALLCAPS,
+		.ifnum = 	0,
+		.type = QUIRK_MIDI_US122L,
+		.data = &quirk_data
+	};
+	struct usb_device *dev = US122L(card)->dev;
+	struct usb_interface *iface = usb_ifnum_to_if(dev, 0);
+
+	return snd_usbmidi_create(card, iface,
+				  &US122L(card)->midi_list, &quirk);
 }
 
 /*
@@ -171,7 +193,12 @@
 
 	if (!us122l->first)
 		us122l->first = file;
-	iface = usb_ifnum_to_if(us122l->chip.dev, 1);
+
+	if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+		iface = usb_ifnum_to_if(us122l->dev, 0);
+		usb_autopm_get_interface(iface);
+	}
+	iface = usb_ifnum_to_if(us122l->dev, 1);
 	usb_autopm_get_interface(iface);
 	return 0;
 }
@@ -179,8 +206,14 @@
 static int usb_stream_hwdep_release(struct snd_hwdep *hw, struct file *file)
 {
 	struct us122l	*us122l = hw->private_data;
-	struct usb_interface *iface = usb_ifnum_to_if(us122l->chip.dev, 1);
+	struct usb_interface *iface;
 	snd_printdd(KERN_DEBUG "%p %p\n", hw, file);
+
+	if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+		iface = usb_ifnum_to_if(us122l->dev, 0);
+		usb_autopm_put_interface(iface);
+	}
+	iface = usb_ifnum_to_if(us122l->dev, 1);
 	usb_autopm_put_interface(iface);
 	if (us122l->first == file)
 		us122l->first = NULL;
@@ -264,7 +297,7 @@
 static void us122l_stop(struct us122l *us122l)
 {
 	struct list_head *p;
-	list_for_each(p, &us122l->chip.midi_list)
+	list_for_each(p, &us122l->midi_list)
 		snd_usbmidi_input_stop(p);
 
 	usb_stream_stop(&us122l->sk);
@@ -297,7 +330,7 @@
 	unsigned use_packsize = 0;
 	bool success = false;
 
-	if (us122l->chip.dev->speed == USB_SPEED_HIGH) {
+	if (us122l->dev->speed == USB_SPEED_HIGH) {
 		/* The us-122l's descriptor defaults to iso max_packsize 78,
 		   which isn't needed for samplerates <= 48000.
 		   Lets save some memory:
@@ -314,11 +347,11 @@
 			break;
 		}
 	}
-	if (!usb_stream_new(&us122l->sk, us122l->chip.dev, 1, 2,
+	if (!usb_stream_new(&us122l->sk, us122l->dev, 1, 2,
 			    rate, use_packsize, period_frames, 6))
 		goto out;
 
-	err = us122l_set_sample_rate(us122l->chip.dev, rate);
+	err = us122l_set_sample_rate(us122l->dev, rate);
 	if (err < 0) {
 		us122l_stop(us122l);
 		snd_printk(KERN_ERR "us122l_set_sample_rate error \n");
@@ -330,7 +363,7 @@
 		snd_printk(KERN_ERR "us122l_start error %i \n", err);
 		goto out;
 	}
-	list_for_each(p, &us122l->chip.midi_list)
+	list_for_each(p, &us122l->midi_list)
 		snd_usbmidi_input_start(p);
 	success = true;
 out:
@@ -357,7 +390,7 @@
 		err = -ENXIO;
 		goto free;
 	}
-	high_speed = us122l->chip.dev->speed == USB_SPEED_HIGH;
+	high_speed = us122l->dev->speed == USB_SPEED_HIGH;
 	if ((cfg->sample_rate != 44100 && cfg->sample_rate != 48000  &&
 	     (!high_speed ||
 	      (cfg->sample_rate != 88200 && cfg->sample_rate != 96000))) ||
@@ -417,7 +450,7 @@
 {
 	int err;
 	struct snd_hwdep *hw;
-	struct usb_device *dev = US122L(card)->chip.dev;
+	struct usb_device *dev = US122L(card)->dev;
 
 	err = snd_hwdep_new(card, SND_USB_STREAM_ID, 0, &hw);
 	if (err < 0)
@@ -443,19 +476,29 @@
 	int err;
 	struct us122l *us122l = US122L(card);
 
-	err = usb_set_interface(us122l->chip.dev, 1, 1);
+	if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+		err = usb_set_interface(us122l->dev, 0, 1);
+		if (err) {
+			snd_printk(KERN_ERR "usb_set_interface error \n");
+			return false;
+		}
+	}
+	err = usb_set_interface(us122l->dev, 1, 1);
 	if (err) {
 		snd_printk(KERN_ERR "usb_set_interface error \n");
 		return false;
 	}
 
-	pt_info_set(us122l->chip.dev, 0x11);
-	pt_info_set(us122l->chip.dev, 0x10);
+	pt_info_set(us122l->dev, 0x11);
+	pt_info_set(us122l->dev, 0x10);
 
 	if (!us122l_start(us122l, 44100, 256))
 		return false;
 
-	err = us122l_create_usbmidi(card);
+	if (us122l->dev->descriptor.idProduct == USB_ID_US144)
+		err = us144_create_usbmidi(card);
+	else
+		err = us122l_create_usbmidi(card);
 	if (err < 0) {
 		snd_printk(KERN_ERR "us122l_create_usbmidi error %i \n", err);
 		us122l_stop(us122l);
@@ -465,7 +508,7 @@
 	if (err < 0) {
 /* release the midi resources */
 		struct list_head *p;
-		list_for_each(p, &us122l->chip.midi_list)
+		list_for_each(p, &us122l->midi_list)
 			snd_usbmidi_disconnect(p);
 
 		us122l_stop(us122l);
@@ -477,7 +520,7 @@
 static void snd_us122l_free(struct snd_card *card)
 {
 	struct us122l	*us122l = US122L(card);
-	int		index = us122l->chip.index;
+	int		index = us122l->card_index;
 	if (index >= 0  &&  index < SNDRV_CARDS)
 		snd_us122l_card_used[index] = 0;
 }
@@ -497,13 +540,12 @@
 			      sizeof(struct us122l), &card);
 	if (err < 0)
 		return err;
-	snd_us122l_card_used[US122L(card)->chip.index = dev] = 1;
+	snd_us122l_card_used[US122L(card)->card_index = dev] = 1;
 	card->private_free = snd_us122l_free;
-	US122L(card)->chip.dev = device;
-	US122L(card)->chip.card = card;
+	US122L(card)->dev = device;
 	mutex_init(&US122L(card)->mutex);
 	init_waitqueue_head(&US122L(card)->sk.sleep);
-	INIT_LIST_HEAD(&US122L(card)->chip.midi_list);
+	INIT_LIST_HEAD(&US122L(card)->midi_list);
 	strcpy(card->driver, "USB "NAME_ALLCAPS"");
 	sprintf(card->shortname, "TASCAM "NAME_ALLCAPS"");
 	sprintf(card->longname, "%s (%x:%x if %d at %03d/%03d)",
@@ -511,8 +553,8 @@
 		le16_to_cpu(device->descriptor.idVendor),
 		le16_to_cpu(device->descriptor.idProduct),
 		0,
-		US122L(card)->chip.dev->bus->busnum,
-		US122L(card)->chip.dev->devnum
+		US122L(card)->dev->bus->busnum,
+		US122L(card)->dev->devnum
 		);
 	*cardp = card;
 	return 0;
@@ -542,6 +584,7 @@
 		return err;
 	}
 
+	usb_get_intf(usb_ifnum_to_if(device, 0));
 	usb_get_dev(device);
 	*cardp = card;
 	return 0;
@@ -550,9 +593,16 @@
 static int snd_us122l_probe(struct usb_interface *intf,
 			    const struct usb_device_id *id)
 {
+	struct usb_device *device = interface_to_usbdev(intf);
 	struct snd_card *card;
 	int err;
 
+	if (device->descriptor.idProduct == USB_ID_US144
+		&& device->speed == USB_SPEED_HIGH) {
+		snd_printk(KERN_ERR "disable ehci-hcd to run US-144 \n");
+		return -ENODEV;
+	}
+
 	snd_printdd(KERN_DEBUG"%p:%i\n",
 		    intf, intf->cur_altsetting->desc.bInterfaceNumber);
 	if (intf->cur_altsetting->desc.bInterfaceNumber != 1)
@@ -584,15 +634,15 @@
 	mutex_lock(&us122l->mutex);
 	us122l_stop(us122l);
 	mutex_unlock(&us122l->mutex);
-	us122l->chip.shutdown = 1;
 
 /* release the midi resources */
-	list_for_each(p, &us122l->chip.midi_list) {
+	list_for_each(p, &us122l->midi_list) {
 		snd_usbmidi_disconnect(p);
 	}
 
-	usb_put_intf(intf);
-	usb_put_dev(us122l->chip.dev);
+	usb_put_intf(usb_ifnum_to_if(us122l->dev, 0));
+	usb_put_intf(usb_ifnum_to_if(us122l->dev, 1));
+	usb_put_dev(us122l->dev);
 
 	while (atomic_read(&us122l->mmap_count))
 		msleep(500);
@@ -615,7 +665,7 @@
 	if (!us122l)
 		return 0;
 
-	list_for_each(p, &us122l->chip.midi_list)
+	list_for_each(p, &us122l->midi_list)
 		snd_usbmidi_input_stop(p);
 
 	mutex_lock(&us122l->mutex);
@@ -642,16 +692,23 @@
 
 	mutex_lock(&us122l->mutex);
 	/* needed, doesn't restart without: */
-	err = usb_set_interface(us122l->chip.dev, 1, 1);
+	if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+		err = usb_set_interface(us122l->dev, 0, 1);
+		if (err) {
+			snd_printk(KERN_ERR "usb_set_interface error \n");
+			goto unlock;
+		}
+	}
+	err = usb_set_interface(us122l->dev, 1, 1);
 	if (err) {
 		snd_printk(KERN_ERR "usb_set_interface error \n");
 		goto unlock;
 	}
 
-	pt_info_set(us122l->chip.dev, 0x11);
-	pt_info_set(us122l->chip.dev, 0x10);
+	pt_info_set(us122l->dev, 0x11);
+	pt_info_set(us122l->dev, 0x10);
 
-	err = us122l_set_sample_rate(us122l->chip.dev,
+	err = us122l_set_sample_rate(us122l->dev,
 				     us122l->sk.s->cfg.sample_rate);
 	if (err < 0) {
 		snd_printk(KERN_ERR "us122l_set_sample_rate error \n");
@@ -661,7 +718,7 @@
 	if (err)
 		goto unlock;
 
-	list_for_each(p, &us122l->chip.midi_list)
+	list_for_each(p, &us122l->midi_list)
 		snd_usbmidi_input_start(p);
 unlock:
 	mutex_unlock(&us122l->mutex);
@@ -675,11 +732,11 @@
 		.idVendor =	0x0644,
 		.idProduct =	USB_ID_US122L
 	},
-/*  	{ */		/* US-144 maybe works when @USB1.1. Untested. */
-/* 		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE, */
-/* 		.idVendor =	0x0644, */
-/* 		.idProduct =	USB_ID_US144 */
-/* 	}, */
+	{	/* US-144 only works at USB1.1! Disable module ehci-hcd. */
+		.match_flags =	USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =	0x0644,
+		.idProduct =	USB_ID_US144
+	},
 	{ /* terminator */ }
 };
 
diff --git a/sound/usb/usx2y/us122l.h b/sound/usb/usx2y/us122l.h
index 3d10c4b..4daf198 100644
--- a/sound/usb/usx2y/us122l.h
+++ b/sound/usb/usx2y/us122l.h
@@ -3,7 +3,8 @@
 
 
 struct us122l {
-	struct snd_usb_audio 	chip;
+	struct usb_device	*dev;
+	int			card_index;
 	int			stride;
 	struct usb_stream_kernel sk;
 
@@ -12,6 +13,7 @@
 	unsigned		second_periods_polled;
 	struct file		*master;
 	struct file		*slave;
+	struct list_head	midi_list;
 
 	atomic_t		mmap_count;
 };
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index 52e04b2..1879b72 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -114,7 +114,7 @@
 	struct usX2Ydev	*us428 = hw->private_data;
 	int id = -1;
 
-	switch (le16_to_cpu(us428->chip.dev->descriptor.idProduct)) {
+	switch (le16_to_cpu(us428->dev->descriptor.idProduct)) {
 	case USB_ID_US122:
 		id = USX2Y_TYPE_122;
 		break;
@@ -164,14 +164,14 @@
        		.type = QUIRK_MIDI_FIXED_ENDPOINT,
 		.data = &quirk_data_2
 	};
-	struct usb_device *dev = usX2Y(card)->chip.dev;
+	struct usb_device *dev = usX2Y(card)->dev;
 	struct usb_interface *iface = usb_ifnum_to_if(dev, 0);
 	struct snd_usb_audio_quirk *quirk =
 		le16_to_cpu(dev->descriptor.idProduct) == USB_ID_US428 ?
 		&quirk_2 : &quirk_1;
 
 	snd_printdd("usX2Y_create_usbmidi \n");
-	return snd_usb_create_midi_interface(&usX2Y(card)->chip, iface, quirk);
+	return snd_usbmidi_create(card, iface, &usX2Y(card)->midi_list, quirk);
 }
 
 static int usX2Y_create_alsa_devices(struct snd_card *card)
@@ -202,7 +202,7 @@
 	snd_printdd( "dsp_load %s\n", dsp->name);
 
 	if (access_ok(VERIFY_READ, dsp->image, dsp->length)) {
-		struct usb_device* dev = priv->chip.dev;
+		struct usb_device* dev = priv->dev;
 		char *buf;
 
 		buf = memdup_user(dsp->image, dsp->length);
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index cb4bb83..c42350e 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -239,8 +239,8 @@
 				for (j = 0; j < URBS_AsyncSeq  &&  !err; ++j)
 					if (0 == usX2Y->AS04.urb[j]->status) {
 						struct us428_p4out *p4out = us428ctls->p4out + send;	// FIXME if more than 1 p4out is new, 1 gets lost.
-						usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->chip.dev,
-								  usb_sndbulkpipe(usX2Y->chip.dev, 0x04), &p4out->val.vol, 
+						usb_fill_bulk_urb(usX2Y->AS04.urb[j], usX2Y->dev,
+								  usb_sndbulkpipe(usX2Y->dev, 0x04), &p4out->val.vol,
 								  p4out->type == eLT_Light ? sizeof(struct us428_lights) : 5,
 								  i_usX2Y_Out04Int, usX2Y);
 						err = usb_submit_urb(usX2Y->AS04.urb[j], GFP_ATOMIC);
@@ -253,7 +253,7 @@
 	if (err)
 		snd_printk(KERN_ERR "In04Int() usb_submit_urb err=%i\n", err);
 
-	urb->dev = usX2Y->chip.dev;
+	urb->dev = usX2Y->dev;
 	usb_submit_urb(urb, GFP_ATOMIC);
 }
 
@@ -273,8 +273,8 @@
 				err = -ENOMEM;
 				break;
 			}
-			usb_fill_bulk_urb(	usX2Y->AS04.urb[i], usX2Y->chip.dev,
-						usb_sndbulkpipe(usX2Y->chip.dev, 0x04),
+			usb_fill_bulk_urb(	usX2Y->AS04.urb[i], usX2Y->dev,
+						usb_sndbulkpipe(usX2Y->dev, 0x04),
 						usX2Y->AS04.buffer + URB_DataLen_AsyncSeq*i, 0,
 						i_usX2Y_Out04Int, usX2Y
 				);
@@ -293,7 +293,7 @@
 	}
 	 
 	init_waitqueue_head(&usX2Y->In04WaitQueue);
-	usb_fill_int_urb(usX2Y->In04urb, usX2Y->chip.dev, usb_rcvintpipe(usX2Y->chip.dev, 0x4),
+	usb_fill_int_urb(usX2Y->In04urb, usX2Y->dev, usb_rcvintpipe(usX2Y->dev, 0x4),
 			 usX2Y->In04Buf, 21,
 			 i_usX2Y_In04Int, usX2Y,
 			 10);
@@ -348,13 +348,12 @@
 			      sizeof(struct usX2Ydev), &card);
 	if (err < 0)
 		return err;
-	snd_usX2Y_card_used[usX2Y(card)->chip.index = dev] = 1;
+	snd_usX2Y_card_used[usX2Y(card)->card_index = dev] = 1;
 	card->private_free = snd_usX2Y_card_private_free;
-	usX2Y(card)->chip.dev = device;
-	usX2Y(card)->chip.card = card;
+	usX2Y(card)->dev = device;
 	init_waitqueue_head(&usX2Y(card)->prepare_wait_queue);
 	mutex_init(&usX2Y(card)->prepare_mutex);
-	INIT_LIST_HEAD(&usX2Y(card)->chip.midi_list);
+	INIT_LIST_HEAD(&usX2Y(card)->midi_list);
 	strcpy(card->driver, "USB "NAME_ALLCAPS"");
 	sprintf(card->shortname, "TASCAM "NAME_ALLCAPS"");
 	sprintf(card->longname, "%s (%x:%x if %d at %03d/%03d)",
@@ -362,7 +361,7 @@
 		le16_to_cpu(device->descriptor.idVendor),
 		le16_to_cpu(device->descriptor.idProduct),
 		0,//us428(card)->usbmidi.ifnum,
-		usX2Y(card)->chip.dev->bus->busnum, usX2Y(card)->chip.dev->devnum
+		usX2Y(card)->dev->bus->busnum, usX2Y(card)->dev->devnum
 		);
 	*cardp = card;
 	return 0;
@@ -432,8 +431,8 @@
 	usb_free_urb(usX2Y(card)->In04urb);
 	if (usX2Y(card)->us428ctls_sharedmem)
 		snd_free_pages(usX2Y(card)->us428ctls_sharedmem, sizeof(*usX2Y(card)->us428ctls_sharedmem));
-	if (usX2Y(card)->chip.index >= 0  &&  usX2Y(card)->chip.index < SNDRV_CARDS)
-		snd_usX2Y_card_used[usX2Y(card)->chip.index] = 0;
+	if (usX2Y(card)->card_index >= 0  &&  usX2Y(card)->card_index < SNDRV_CARDS)
+		snd_usX2Y_card_used[usX2Y(card)->card_index] = 0;
 }
 
 /*
@@ -445,13 +444,12 @@
 		struct snd_card *card = ptr;
 		struct usX2Ydev *usX2Y = usX2Y(card);
 		struct list_head *p;
-		usX2Y->chip.shutdown = 1;
 		usX2Y->chip_status = USX2Y_STAT_CHIP_HUP;
 		usX2Y_unlinkSeq(&usX2Y->AS04);
 		usb_kill_urb(usX2Y->In04urb);
 		snd_card_disconnect(card);
 		/* release the midi resources */
-		list_for_each(p, &usX2Y->chip.midi_list) {
+		list_for_each(p, &usX2Y->midi_list) {
 			snd_usbmidi_disconnect(p);
 		}
 		if (usX2Y->us428ctls_sharedmem) 
diff --git a/sound/usb/usx2y/usbusx2y.h b/sound/usb/usx2y/usbusx2y.h
index 456b5fd..1d174ce 100644
--- a/sound/usb/usx2y/usbusx2y.h
+++ b/sound/usb/usx2y/usbusx2y.h
@@ -22,7 +22,8 @@
 #include "usx2yhwdeppcm.h"
 
 struct usX2Ydev {
-	struct snd_usb_audio 	chip;
+	struct usb_device	*dev;
+	int			card_index;
 	int			stride;
 	struct urb		*In04urb;
 	void			*In04Buf;
@@ -42,6 +43,9 @@
 	struct snd_usX2Y_substream	*subs[4];
 	struct snd_usX2Y_substream	* volatile  prepare_subs;
 	wait_queue_head_t	prepare_wait_queue;
+	struct list_head	midi_list;
+	struct list_head	pcm_list;
+	int			pcm_devs;
 };
 
 
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index 9efd27f..74a67a8 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -199,7 +199,7 @@
 		return -ENODEV;
 	urb->start_frame = (frame + NRURBS * nr_of_packs());  // let hcd do rollover sanity checks
 	urb->hcpriv = NULL;
-	urb->dev = subs->usX2Y->chip.dev; /* we need to set this at each time */
+	urb->dev = subs->usX2Y->dev; /* we need to set this at each time */
 	if ((err = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
 		snd_printk(KERN_ERR "usb_submit_urb() returned %i\n", err);
 		return err;
@@ -300,7 +300,7 @@
 "Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n"
 "Most propably some urb of usb-frame %i is still missing.\n"
 "Cause could be too long delays in usb-hcd interrupt handling.\n",
-		   usb_get_current_frame_number(usX2Y->chip.dev),
+		   usb_get_current_frame_number(usX2Y->dev),
 		   subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
 		   usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame);
 	usX2Y_clients_stop(usX2Y);
@@ -313,7 +313,7 @@
 
 	if (unlikely(atomic_read(&subs->state) < state_PREPARED)) {
 		snd_printdd("hcd_frame=%i ep=%i%s status=%i start_frame=%i\n",
-			    usb_get_current_frame_number(usX2Y->chip.dev),
+			    usb_get_current_frame_number(usX2Y->dev),
 			    subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
 			    urb->status, urb->start_frame);
 		return;
@@ -424,7 +424,7 @@
 	int i;
 	unsigned int pipe;
 	int is_playback = subs == subs->usX2Y->subs[SNDRV_PCM_STREAM_PLAYBACK];
-	struct usb_device *dev = subs->usX2Y->chip.dev;
+	struct usb_device *dev = subs->usX2Y->dev;
 
 	pipe = is_playback ? usb_sndisocpipe(dev, subs->endpoint) :
 			usb_rcvisocpipe(dev, subs->endpoint);
@@ -500,7 +500,7 @@
 			unsigned long pack;
 			if (0 == i)
 				atomic_set(&subs->state, state_STARTING3);
-			urb->dev = usX2Y->chip.dev;
+			urb->dev = usX2Y->dev;
 			urb->transfer_flags = URB_ISO_ASAP;
 			for (pack = 0; pack < nr_of_packs(); pack++) {
 				urb->iso_frame_desc[pack].offset = subs->maxpacksize * pack;
@@ -692,7 +692,7 @@
 			}
 			((char*)(usbdata + i))[0] = ra[i].c1;
 			((char*)(usbdata + i))[1] = ra[i].c2;
-			usb_fill_bulk_urb(us->urb[i], usX2Y->chip.dev, usb_sndbulkpipe(usX2Y->chip.dev, 4),
+			usb_fill_bulk_urb(us->urb[i], usX2Y->dev, usb_sndbulkpipe(usX2Y->dev, 4),
 					  usbdata + i, 2, i_usX2Y_04Int, usX2Y);
 #ifdef OLD_USB
 			us->urb[i]->transfer_flags = USB_QUEUE_BULK;
@@ -740,17 +740,17 @@
 		alternate = 1;
 		usX2Y->stride = 4;
 	}
-	list_for_each(p, &usX2Y->chip.midi_list) {
+	list_for_each(p, &usX2Y->midi_list) {
 		snd_usbmidi_input_stop(p);
 	}
 	usb_kill_urb(usX2Y->In04urb);
-	if ((err = usb_set_interface(usX2Y->chip.dev, 0, alternate))) {
+	if ((err = usb_set_interface(usX2Y->dev, 0, alternate))) {
 		snd_printk(KERN_ERR "usb_set_interface error \n");
 		return err;
 	}
-	usX2Y->In04urb->dev = usX2Y->chip.dev;
+	usX2Y->In04urb->dev = usX2Y->dev;
 	err = usb_submit_urb(usX2Y->In04urb, GFP_KERNEL);
-	list_for_each(p, &usX2Y->chip.midi_list) {
+	list_for_each(p, &usX2Y->midi_list) {
 		snd_usbmidi_input_start(p);
 	}
 	usX2Y->format = format;
@@ -955,7 +955,7 @@
 	struct snd_pcm *pcm;
 	int err, i;
 	struct snd_usX2Y_substream **usX2Y_substream =
-		usX2Y(card)->subs + 2 * usX2Y(card)->chip.pcm_devs;
+		usX2Y(card)->subs + 2 * usX2Y(card)->pcm_devs;
 
 	for (i = playback_endpoint ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE;
 	     i <= SNDRV_PCM_STREAM_CAPTURE; ++i) {
@@ -971,7 +971,7 @@
 		usX2Y_substream[SNDRV_PCM_STREAM_PLAYBACK]->endpoint = playback_endpoint;
 	usX2Y_substream[SNDRV_PCM_STREAM_CAPTURE]->endpoint = capture_endpoint;
 
-	err = snd_pcm_new(card, NAME_ALLCAPS" Audio", usX2Y(card)->chip.pcm_devs,
+	err = snd_pcm_new(card, NAME_ALLCAPS" Audio", usX2Y(card)->pcm_devs,
 			  playback_endpoint ? 1 : 0, 1,
 			  &pcm);
 	if (err < 0) {
@@ -987,7 +987,7 @@
 	pcm->private_free = snd_usX2Y_pcm_private_free;
 	pcm->info_flags = 0;
 
-	sprintf(pcm->name, NAME_ALLCAPS" Audio #%d", usX2Y(card)->chip.pcm_devs);
+	sprintf(pcm->name, NAME_ALLCAPS" Audio #%d", usX2Y(card)->pcm_devs);
 
 	if ((playback_endpoint &&
 	     0 > (err = snd_pcm_lib_preallocate_pages(pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream,
@@ -1001,7 +1001,7 @@
 		snd_usX2Y_pcm_private_free(pcm);
 		return err;
 	}
-	usX2Y(card)->chip.pcm_devs++;
+	usX2Y(card)->pcm_devs++;
 
 	return 0;
 }
@@ -1013,14 +1013,14 @@
 {
 	int err = 0;
 	
-	INIT_LIST_HEAD(&usX2Y(card)->chip.pcm_list);
+	INIT_LIST_HEAD(&usX2Y(card)->pcm_list);
 
 	if (0 > (err = usX2Y_audio_stream_new(card, 0xA, 0x8)))
 		return err;
-	if (le16_to_cpu(usX2Y(card)->chip.dev->descriptor.idProduct) == USB_ID_US428)
+	if (le16_to_cpu(usX2Y(card)->dev->descriptor.idProduct) == USB_ID_US428)
 	     if (0 > (err = usX2Y_audio_stream_new(card, 0, 0xA)))
 		     return err;
-	if (le16_to_cpu(usX2Y(card)->chip.dev->descriptor.idProduct) != USB_ID_US122)
+	if (le16_to_cpu(usX2Y(card)->dev->descriptor.idProduct) != USB_ID_US122)
 		err = usX2Y_rate_set(usX2Y(card), 44100);	// Lets us428 recognize output-volume settings, disturbs us122.
 	return err;
 }
diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index 4b2304c..9ed6c39 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -234,7 +234,7 @@
 
 	if (unlikely(atomic_read(&subs->state) < state_PREPARED)) {
 		snd_printdd("hcd_frame=%i ep=%i%s status=%i start_frame=%i\n",
-			    usb_get_current_frame_number(usX2Y->chip.dev),
+			    usb_get_current_frame_number(usX2Y->dev),
 			    subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out",
 			    urb->status, urb->start_frame);
 		return;
@@ -318,7 +318,7 @@
 	int i;
 	unsigned int pipe;
 	int is_playback = subs == subs->usX2Y->subs[SNDRV_PCM_STREAM_PLAYBACK];
-	struct usb_device *dev = subs->usX2Y->chip.dev;
+	struct usb_device *dev = subs->usX2Y->dev;
 
 	pipe = is_playback ? usb_sndisocpipe(dev, subs->endpoint) :
 			usb_rcvisocpipe(dev, subs->endpoint);
@@ -441,7 +441,7 @@
 					unsigned long pack;
 					if (0 == u)
 						atomic_set(&subs->state, state_STARTING3);
-					urb->dev = usX2Y->chip.dev;
+					urb->dev = usX2Y->dev;
 					urb->transfer_flags = URB_ISO_ASAP;
 					for (pack = 0; pack < nr_of_packs(); pack++) {
 						urb->iso_frame_desc[pack].offset = subs->maxpacksize * (pack + u * nr_of_packs());
@@ -741,7 +741,7 @@
 	int err;
 	struct snd_hwdep *hw;
 	struct snd_pcm *pcm;
-	struct usb_device *dev = usX2Y(card)->chip.dev;
+	struct usb_device *dev = usX2Y(card)->dev;
 	if (1 != nr_of_packs())
 		return 0;
 
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index 0854f11..fe08660 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -12,6 +12,7 @@
 perf*.xml
 perf*.html
 common-cmds.h
+perf.data
 tags
 TAGS
 cscope*
diff --git a/tools/perf/Documentation/perf-bench.txt b/tools/perf/Documentation/perf-bench.txt
new file mode 100644
index 0000000..ae525ac
--- /dev/null
+++ b/tools/perf/Documentation/perf-bench.txt
@@ -0,0 +1,120 @@
+perf-bench(1)
+============
+
+NAME
+----
+perf-bench - General framework for benchmark suites
+
+SYNOPSIS
+--------
+[verse]
+'perf bench' [<common options>] <subsystem> <suite> [<options>]
+
+DESCRIPTION
+-----------
+This 'perf bench' command is general framework for benchmark suites.
+
+COMMON OPTIONS
+--------------
+-f::
+--format=::
+Specify format style.
+Current available format styles are,
+
+'default'::
+Default style. This is mainly for human reading.
+---------------------
+% perf bench sched pipe                      # with no style specify
+(executing 1000000 pipe operations between two tasks)
+        Total time:5.855 sec
+                5.855061 usecs/op
+		170792 ops/sec
+---------------------
+
+'simple'::
+This simple style is friendly for automated
+processing by scripts.
+---------------------
+% perf bench --format=simple sched pipe      # specified simple
+5.988
+---------------------
+
+SUBSYSTEM
+---------
+
+'sched'::
+	Scheduler and IPC mechanisms.
+
+SUITES FOR 'sched'
+~~~~~~~~~~~~~~~~~~
+*messaging*::
+Suite for evaluating performance of scheduler and IPC mechanisms.
+Based on hackbench by Rusty Russell.
+
+Options of *pipe*
+^^^^^^^^^^^^^^^^^
+-p::
+--pipe::
+Use pipe() instead of socketpair()
+
+-t::
+--thread::
+Be multi thread instead of multi process
+
+-g::
+--group=::
+Specify number of groups
+
+-l::
+--loop=::
+Specify number of loops
+
+Example of *messaging*
+^^^^^^^^^^^^^^^^^^^^^^
+
+---------------------
+% perf bench sched messaging                 # run with default
+options (20 sender and receiver processes per group)
+(10 groups == 400 processes run)
+
+      Total time:0.308 sec
+
+% perf bench sched messaging -t -g 20        # be multi-thread,with 20 groups
+(20 sender and receiver threads per group)
+(20 groups == 800 threads run)
+
+      Total time:0.582 sec
+---------------------
+
+*pipe*::
+Suite for pipe() system call.
+Based on pipe-test-1m.c by Ingo Molnar.
+
+Options of *pipe*
+^^^^^^^^^^^^^^^^^
+-l::
+--loop=::
+Specify number of loops.
+
+Example of *pipe*
+^^^^^^^^^^^^^^^^^
+
+---------------------
+% perf bench sched pipe
+(executing 1000000 pipe operations between two tasks)
+
+        Total time:8.091 sec
+                8.091833 usecs/op
+                123581 ops/sec
+
+% perf bench sched pipe -l 1000              # loop 1000
+(executing 1000 pipe operations between two tasks)
+
+        Total time:0.016 sec
+                16.948000 usecs/op
+                59004 ops/sec
+---------------------
+
+SEE ALSO
+--------
+linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-buildid-list.txt b/tools/perf/Documentation/perf-buildid-list.txt
new file mode 100644
index 0000000..01b642c
--- /dev/null
+++ b/tools/perf/Documentation/perf-buildid-list.txt
@@ -0,0 +1,34 @@
+perf-buildid-list(1)
+====================
+
+NAME
+----
+perf-buildid-list - List the buildids in a perf.data file
+
+SYNOPSIS
+--------
+[verse]
+'perf buildid-list <options>'
+
+DESCRIPTION
+-----------
+This command displays the buildids found in a perf.data file, so that other
+tools can be used to fetch packages with matching symbol tables for use by
+perf report.
+
+OPTIONS
+-------
+-i::
+--input=::
+        Input file name. (default: perf.data)
+-f::
+--force::
+	Don't do ownership validation.
+-v::
+--verbose::
+	Be more verbose.
+
+SEE ALSO
+--------
+linkperf:perf-record[1], linkperf:perf-top[1],
+linkperf:perf-report[1]
diff --git a/tools/perf/Documentation/perf-kmem.txt b/tools/perf/Documentation/perf-kmem.txt
new file mode 100644
index 0000000..44b0ce3
--- /dev/null
+++ b/tools/perf/Documentation/perf-kmem.txt
@@ -0,0 +1,44 @@
+perf-kmem(1)
+==============
+
+NAME
+----
+perf-kmem - Tool to trace/measure kernel memory(slab) properties
+
+SYNOPSIS
+--------
+[verse]
+'perf kmem' {record} [<options>]
+
+DESCRIPTION
+-----------
+There's two variants of perf kmem:
+
+  'perf kmem record <command>' to record the kmem events
+  of an arbitrary workload.
+
+  'perf kmem' to report kernel memory statistics.
+
+OPTIONS
+-------
+-i <file>::
+--input=<file>::
+	Select the input file (default: perf.data)
+
+--stat=<caller|alloc>::
+	Select per callsite or per allocation statistics
+
+-s <key[,key2...]>::
+--sort=<key[,key2...]>::
+	Sort the output (default: frag,hit,bytes)
+
+-l <num>::
+--line=<num>::
+	Print n lines only
+
+--raw-ip::
+	Print raw ip instead of symbol
+
+SEE ALSO
+--------
+linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
new file mode 100644
index 0000000..9270594
--- /dev/null
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -0,0 +1,49 @@
+perf-probe(1)
+=============
+
+NAME
+----
+perf-probe - Define new dynamic tracepoints
+
+SYNOPSIS
+--------
+[verse]
+'perf probe' [options] --add 'PROBE' [--add 'PROBE' ...]
+or
+'perf probe' [options] 'PROBE' ['PROBE' ...]
+
+
+DESCRIPTION
+-----------
+This command defines dynamic tracepoint events, by symbol and registers
+without debuginfo, or by C expressions (C line numbers, C function names,
+and C local variables) with debuginfo.
+
+
+OPTIONS
+-------
+-k::
+--vmlinux=PATH::
+	Specify vmlinux path which has debuginfo (Dwarf binary).
+
+-v::
+--verbose::
+        Be more verbose (show parsed arguments, etc).
+
+-a::
+--add::
+	Define a probe point (see PROBE SYNTAX for detail)
+
+PROBE SYNTAX
+------------
+Probe points are defined by following syntax.
+
+ "FUNC[+OFFS|:RLN|%return][@SRC]|SRC:ALN [ARG ...]"
+
+'FUNC' specifies a probed function name, and it may have one of the following options; '+OFFS' is the offset from function entry address in bytes, 'RLN' is the relative-line number from function entry line, and '%return' means that it probes function return. In addition, 'SRC' specifies a source file which has that function.
+It is also possible to specify a probe point by the source line number by using 'SRC:ALN' syntax, where 'SRC' is the source file path and 'ALN' is the line number.
+'ARG' specifies the arguments of this probe point. You can use the name of local variable, or kprobe-tracer argument format (e.g. $retval, %ax, etc).
+
+SEE ALSO
+--------
+linkperf:perf-trace[1], linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index 0ff23de..fc46c0b 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -26,11 +26,19 @@
 
 -e::
 --event=::
-	Select the PMU event. Selection can be a symbolic event name
-	(use 'perf list' to list all events) or a raw PMU
-	event (eventsel+umask) in the form of rNNN where NNN is a
-	hexadecimal event descriptor.
+	Select the PMU event. Selection can be:
 
+        - a symbolic event name	(use 'perf list' to list all events)
+
+        - a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
+	  hexadecimal event descriptor.
+
+        - a hardware breakpoint event in the form of '\mem:addr[:access]'
+          where addr is the address in memory you want to break in.
+          Access is the memory access type (read, write, execute) it can
+          be passed as follows: '\mem:addr[:[r][w][x]]'.
+          If you want to profile read-write accesses in 0x1000, just set
+          'mem:0x1000:rw'.
 -a::
         System-wide collection.
 
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 59f0b84..9dccb18 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -24,11 +24,11 @@
 --dsos=::
 	Only consider symbols in these dsos. CSV that understands
 	file://filename entries.
--n
---show-nr-samples
+-n::
+--show-nr-samples::
 	Show the number of samples for each symbol
--T
---threads
+-T::
+--threads::
 	Show per-thread event counters
 -C::
 --comms=::
diff --git a/tools/perf/Documentation/perf-timechart.txt b/tools/perf/Documentation/perf-timechart.txt
index a791009..4b17883 100644
--- a/tools/perf/Documentation/perf-timechart.txt
+++ b/tools/perf/Documentation/perf-timechart.txt
@@ -31,9 +31,12 @@
 -w::
 --width=::
         Select the width of the SVG file (default: 1000)
--p::
+-P::
 --power-only::
         Only output the CPU power section of the diagram
+-p::
+--process::
+        Select the processes to display, by name or PID
 
 
 SEE ALSO
diff --git a/tools/perf/Documentation/perf-trace-perl.txt b/tools/perf/Documentation/perf-trace-perl.txt
new file mode 100644
index 0000000..c5f55f4
--- /dev/null
+++ b/tools/perf/Documentation/perf-trace-perl.txt
@@ -0,0 +1,219 @@
+perf-trace-perl(1)
+==================
+
+NAME
+----
+perf-trace-perl - Process trace data with a Perl script
+
+SYNOPSIS
+--------
+[verse]
+'perf trace' [-s [lang]:script[.ext] ]
+
+DESCRIPTION
+-----------
+
+This perf trace option is used to process perf trace data using perf's
+built-in Perl interpreter.  It reads and processes the input file and
+displays the results of the trace analysis implemented in the given
+Perl script, if any.
+
+STARTER SCRIPTS
+---------------
+
+You can avoid reading the rest of this document by running 'perf trace
+-g perl' in the same directory as an existing perf.data trace file.
+That will generate a starter script containing a handler for each of
+the event types in the trace file; it simply prints every available
+field for each event in the trace file.
+
+You can also look at the existing scripts in
+~/libexec/perf-core/scripts/perl for typical examples showing how to
+do basic things like aggregate event data, print results, etc.  Also,
+the check-perf-trace.pl script, while not interesting for its results,
+attempts to exercise all of the main scripting features.
+
+EVENT HANDLERS
+--------------
+
+When perf trace is invoked using a trace script, a user-defined
+'handler function' is called for each event in the trace.  If there's
+no handler function defined for a given event type, the event is
+ignored (or passed to a 'trace_handled' function, see below) and the
+next event is processed.
+
+Most of the event's field values are passed as arguments to the
+handler function; some of the less common ones aren't - those are
+available as calls back into the perf executable (see below).
+
+As an example, the following perf record command can be used to record
+all sched_wakeup events in the system:
+
+ # perf record -c 1 -f -a -M -R -e sched:sched_wakeup
+
+Traces meant to be processed using a script should be recorded with
+the above options: -c 1 says to sample every event, -a to enable
+system-wide collection, -M to multiplex the output, and -R to collect
+raw samples.
+
+The format file for the sched_wakep event defines the following fields
+(see /sys/kernel/debug/tracing/events/sched/sched_wakeup/format):
+
+----
+ format:
+        field:unsigned short common_type;
+        field:unsigned char common_flags;
+        field:unsigned char common_preempt_count;
+        field:int common_pid;
+        field:int common_lock_depth;
+
+        field:char comm[TASK_COMM_LEN];
+        field:pid_t pid;
+        field:int prio;
+        field:int success;
+        field:int target_cpu;
+----
+
+The handler function for this event would be defined as:
+
+----
+sub sched::sched_wakeup
+{
+   my ($event_name, $context, $common_cpu, $common_secs,
+       $common_nsecs, $common_pid, $common_comm,
+       $comm, $pid, $prio, $success, $target_cpu) = @_;
+}
+----
+
+The handler function takes the form subsystem::event_name.
+
+The $common_* arguments in the handler's argument list are the set of
+arguments passed to all event handlers; some of the fields correspond
+to the common_* fields in the format file, but some are synthesized,
+and some of the common_* fields aren't common enough to to be passed
+to every event as arguments but are available as library functions.
+
+Here's a brief description of each of the invariant event args:
+
+ $event_name 	  	    the name of the event as text
+ $context		    an opaque 'cookie' used in calls back into perf
+ $common_cpu		    the cpu the event occurred on
+ $common_secs		    the secs portion of the event timestamp
+ $common_nsecs		    the nsecs portion of the event timestamp
+ $common_pid		    the pid of the current task
+ $common_comm		    the name of the current process
+
+All of the remaining fields in the event's format file have
+counterparts as handler function arguments of the same name, as can be
+seen in the example above.
+
+The above provides the basics needed to directly access every field of
+every event in a trace, which covers 90% of what you need to know to
+write a useful trace script.  The sections below cover the rest.
+
+SCRIPT LAYOUT
+-------------
+
+Every perf trace Perl script should start by setting up a Perl module
+search path and 'use'ing a few support modules (see module
+descriptions below):
+
+----
+ use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+ use lib "./Perf-Trace-Util/lib";
+ use Perf::Trace::Core;
+ use Perf::Trace::Context;
+ use Perf::Trace::Util;
+----
+
+The rest of the script can contain handler functions and support
+functions in any order.
+
+Aside from the event handler functions discussed above, every script
+can implement a set of optional functions:
+
+*trace_begin*, if defined, is called before any event is processed and
+gives scripts a chance to do setup tasks:
+
+----
+ sub trace_begin
+ {
+ }
+----
+
+*trace_end*, if defined, is called after all events have been
+ processed and gives scripts a chance to do end-of-script tasks, such
+ as display results:
+
+----
+sub trace_end
+{
+}
+----
+
+*trace_unhandled*, if defined, is called after for any event that
+ doesn't have a handler explicitly defined for it.  The standard set
+ of common arguments are passed into it:
+
+----
+sub trace_unhandled
+{
+    my ($event_name, $context, $common_cpu, $common_secs,
+        $common_nsecs, $common_pid, $common_comm) = @_;
+}
+----
+
+The remaining sections provide descriptions of each of the available
+built-in perf trace Perl modules and their associated functions.
+
+AVAILABLE MODULES AND FUNCTIONS
+-------------------------------
+
+The following sections describe the functions and variables available
+via the various Perf::Trace::* Perl modules.  To use the functions and
+variables from the given module, add the corresponding 'use
+Perf::Trace::XXX' line to your perf trace script.
+
+Perf::Trace::Core Module
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+These functions provide some essential functions to user scripts.
+
+The *flag_str* and *symbol_str* functions provide human-readable
+strings for flag and symbolic fields.  These correspond to the strings
+and values parsed from the 'print fmt' fields of the event format
+files:
+
+  flag_str($event_name, $field_name, $field_value) - returns the string represention corresponding to $field_value for the flag field $field_name of event $event_name
+  symbol_str($event_name, $field_name, $field_value) - returns the string represention corresponding to $field_value for the symbolic field $field_name of event $event_name
+
+Perf::Trace::Context Module
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Some of the 'common' fields in the event format file aren't all that
+common, but need to be made accessible to user scripts nonetheless.
+
+Perf::Trace::Context defines a set of functions that can be used to
+access this data in the context of the current event.  Each of these
+functions expects a $context variable, which is the same as the
+$context variable passed into every event handler as the second
+argument.
+
+ common_pc($context) - returns common_preempt count for the current event
+ common_flags($context) - returns common_flags for the current event
+ common_lock_depth($context) - returns common_lock_depth for the current event
+
+Perf::Trace::Util Module
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Various utility functions for use with perf trace:
+
+  nsecs($secs, $nsecs) - returns total nsecs given secs/nsecs pair
+  nsecs_secs($nsecs) - returns whole secs portion given nsecs
+  nsecs_nsecs($nsecs) - returns nsecs remainder given nsecs
+  nsecs_str($nsecs) - returns printable string in the form secs.nsecs
+  avg($total, $n) - returns average given a sum and a total number of values
+
+SEE ALSO
+--------
+linkperf:perf-trace[1]
diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt
index 41ed753..07065ef 100644
--- a/tools/perf/Documentation/perf-trace.txt
+++ b/tools/perf/Documentation/perf-trace.txt
@@ -20,6 +20,15 @@
 --dump-raw-trace=::
         Display verbose dump of the trace data.
 
+-s::
+--script=::
+        Process trace data with the given script ([lang]:script[.ext]).
+
+-g::
+--gen-script=::
+        Generate perf-trace.[ext] starter script for given language,
+        using current perf.data.
+
 SEE ALSO
 --------
-linkperf:perf-record[1]
+linkperf:perf-record[1], linkperf:perf-trace-perl[1]
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 7e190d5..23ec6609 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -2,6 +2,7 @@
 all::
 
 # Define V=1 to have a more verbose compile.
+# Define V=2 to have an even more verbose compile.
 #
 # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
 # or vsnprintf() return -1 instead of number of characters which would
@@ -145,6 +146,10 @@
 # Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call
 # your external grep (e.g., if your system lacks grep, if its grep is
 # broken, or spawning external process is slower than built-in grep perf has).
+#
+# Define LDFLAGS=-static to build a static binary.
+#
+# Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
 
 PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
 	@$(SHELL_PATH) util/PERF-VERSION-GEN
@@ -157,20 +162,6 @@
 uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
 uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
 
-#
-# Add -m32 for cross-builds:
-#
-ifdef NO_64BIT
-  MBITS := -m32
-else
-  #
-  # If we're on a 64-bit kernel, use -m64:
-  #
-  ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
-    MBITS := -m64
-  endif
-endif
-
 # CFLAGS and LDFLAGS are for the users to override from the command line.
 
 #
@@ -200,8 +191,15 @@
 EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
 EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
 
-CFLAGS = $(MBITS) -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -fstack-protector-all -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS)
-LDFLAGS = -lpthread -lrt -lelf -lm
+ifeq ("$(origin DEBUG)", "command line")
+  PERF_DEBUG = $(DEBUG)
+endif
+ifndef PERF_DEBUG
+  CFLAGS_OPTIMIZE = -O6
+endif
+
+CFLAGS = -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
+EXTLIBS = -lpthread -lrt -lelf -lm
 ALL_CFLAGS = $(CFLAGS)
 ALL_LDFLAGS = $(LDFLAGS)
 STRIP ?= strip
@@ -252,6 +250,9 @@
 # explicitly what architecture to check for. Fix this up for yours..
 SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
 
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
+  CFLAGS := $(CFLAGS) -fstack-protector-all
+endif
 
 
 ### --- END CONFIGURATION SECTION ---
@@ -327,8 +328,28 @@
 LIB_H += ../../include/linux/perf_event.h
 LIB_H += ../../include/linux/rbtree.h
 LIB_H += ../../include/linux/list.h
+LIB_H += ../../include/linux/stringify.h
+LIB_H += util/include/linux/bitmap.h
+LIB_H += util/include/linux/bitops.h
+LIB_H += util/include/linux/compiler.h
+LIB_H += util/include/linux/ctype.h
+LIB_H += util/include/linux/kernel.h
 LIB_H += util/include/linux/list.h
+LIB_H += util/include/linux/module.h
+LIB_H += util/include/linux/poison.h
+LIB_H += util/include/linux/prefetch.h
+LIB_H += util/include/linux/rbtree.h
+LIB_H += util/include/linux/string.h
+LIB_H += util/include/linux/types.h
+LIB_H += util/include/asm/asm-offsets.h
+LIB_H += util/include/asm/bitops.h
+LIB_H += util/include/asm/byteorder.h
+LIB_H += util/include/asm/swab.h
+LIB_H += util/include/asm/system.h
+LIB_H += util/include/asm/uaccess.h
 LIB_H += perf.h
+LIB_H += util/debugfs.h
+LIB_H += util/event.h
 LIB_H += util/types.h
 LIB_H += util/levenshtein.h
 LIB_H += util/parse-options.h
@@ -342,15 +363,22 @@
 LIB_H += util/run-command.h
 LIB_H += util/sigchain.h
 LIB_H += util/symbol.h
-LIB_H += util/module.h
 LIB_H += util/color.h
 LIB_H += util/values.h
+LIB_H += util/sort.h
+LIB_H += util/hist.h
+LIB_H += util/thread.h
+LIB_H += util/data_map.h
+LIB_H += util/probe-finder.h
+LIB_H += util/probe-event.h
 
 LIB_OBJS += util/abspath.o
 LIB_OBJS += util/alias.o
 LIB_OBJS += util/config.o
 LIB_OBJS += util/ctype.o
+LIB_OBJS += util/debugfs.o
 LIB_OBJS += util/environment.o
+LIB_OBJS += util/event.o
 LIB_OBJS += util/exec_cmd.o
 LIB_OBJS += util/help.o
 LIB_OBJS += util/levenshtein.o
@@ -358,6 +386,9 @@
 LIB_OBJS += util/parse-events.o
 LIB_OBJS += util/path.o
 LIB_OBJS += util/rbtree.o
+LIB_OBJS += util/bitmap.o
+LIB_OBJS += util/hweight.o
+LIB_OBJS += util/find_next_bit.o
 LIB_OBJS += util/run-command.o
 LIB_OBJS += util/quote.o
 LIB_OBJS += util/strbuf.o
@@ -367,7 +398,6 @@
 LIB_OBJS += util/wrapper.o
 LIB_OBJS += util/sigchain.o
 LIB_OBJS += util/symbol.o
-LIB_OBJS += util/module.o
 LIB_OBJS += util/color.o
 LIB_OBJS += util/pager.o
 LIB_OBJS += util/header.o
@@ -379,11 +409,25 @@
 LIB_OBJS += util/trace-event-parse.o
 LIB_OBJS += util/trace-event-read.o
 LIB_OBJS += util/trace-event-info.o
+LIB_OBJS += util/trace-event-perl.o
 LIB_OBJS += util/svghelper.o
+LIB_OBJS += util/sort.o
+LIB_OBJS += util/hist.o
+LIB_OBJS += util/data_map.o
+LIB_OBJS += util/probe-event.o
 
 BUILTIN_OBJS += builtin-annotate.o
+
+BUILTIN_OBJS += builtin-bench.o
+
+# Benchmark modules
+BUILTIN_OBJS += bench/sched-messaging.o
+BUILTIN_OBJS += bench/sched-pipe.o
+BUILTIN_OBJS += bench/mem-memcpy.o
+
 BUILTIN_OBJS += builtin-help.o
 BUILTIN_OBJS += builtin-sched.o
+BUILTIN_OBJS += builtin-buildid-list.o
 BUILTIN_OBJS += builtin-list.o
 BUILTIN_OBJS += builtin-record.o
 BUILTIN_OBJS += builtin-report.o
@@ -391,9 +435,16 @@
 BUILTIN_OBJS += builtin-timechart.o
 BUILTIN_OBJS += builtin-top.o
 BUILTIN_OBJS += builtin-trace.o
+BUILTIN_OBJS += builtin-probe.o
+BUILTIN_OBJS += builtin-kmem.o
 
 PERFLIBS = $(LIB_FILE)
 
+ifeq ($(V), 2)
+	QUIET_STDERR = ">/dev/null"
+else
+	QUIET_STDERR = ">/dev/null 2>&1"
+endif
 #
 # Platform specific tweaks
 #
@@ -421,36 +472,58 @@
 	PTHREAD_LIBS =
 endif
 
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
-	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+	msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
+endif
+
+	ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
 		BASIC_CFLAGS += -DLIBELF_NO_MMAP
 	endif
 else
 	msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
 endif
 
+ifneq ($(shell sh -c "(echo '\#include <libdwarf/dwarf.h>'; echo '\#include <libdwarf/libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+	msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
+	BASIC_CFLAGS += -DNO_LIBDWARF
+else
+	EXTLIBS += -lelf -ldwarf
+	LIB_OBJS += util/probe-finder.o
+endif
+
+PERL_EMBED_LDOPTS = `perl -MExtUtils::Embed -e ldopts 2>/dev/null`
+PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+
+ifneq ($(shell sh -c "(echo '\#include <EXTERN.h>'; echo '\#include <perl.h>'; echo 'int main(void) { perl_alloc(); return 0; }') | $(CC) -x c - $(PERL_EMBED_CCOPTS) -o /dev/null $(PERL_EMBED_LDOPTS) > /dev/null 2>&1 && echo y"), y)
+	BASIC_CFLAGS += -DNO_LIBPERL
+else
+	ALL_LDFLAGS += $(PERL_EMBED_LDOPTS)
+	LIB_OBJS += scripts/perl/Perf-Trace-Util/Context.o
+endif
+
 ifdef NO_DEMANGLE
 	BASIC_CFLAGS += -DNO_DEMANGLE
 else
-	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd > /dev/null 2>&1 && echo y")
+	has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
 
 	ifeq ($(has_bfd),y)
 		EXTLIBS += -lbfd
 	else
-		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty > /dev/null 2>&1 && echo y")
+		has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
 		ifeq ($(has_bfd_iberty),y)
 			EXTLIBS += -lbfd -liberty
 		else
-			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -lbfd -liberty -lz > /dev/null 2>&1 && echo y")
+			has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
 			ifeq ($(has_bfd_iberty_z),y)
 				EXTLIBS += -lbfd -liberty -lz
 			else
-				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) -liberty > /dev/null 2>&1 && echo y")
+				has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
 				ifeq ($(has_cplus_demangle),y)
 					EXTLIBS += -liberty
 					BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
 				else
-					msg := $(warning No bfd.h/libbfd found, install binutils-dev[el] to gain symbol demangling)
+					msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
 					BASIC_CFLAGS += -DNO_DEMANGLE
 				endif
 			endif
@@ -787,6 +860,25 @@
 util/rbtree.o: ../../lib/rbtree.c PERF-CFLAGS
 	$(QUIET_CC)$(CC) -o util/rbtree.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
 
+# some perf warning policies can't fit to lib/bitmap.c, eg: it warns about variable shadowing
+# from <string.h> that comes from kernel headers wrapping.
+KBITMAP_FLAGS=`echo $(ALL_CFLAGS) | sed s/-Wshadow// | sed s/-Wswitch-default// | sed s/-Wextra//`
+
+util/bitmap.o: ../../lib/bitmap.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o util/bitmap.o -c $(KBITMAP_FLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
+util/hweight.o: ../../lib/hweight.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o util/hweight.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
+util/find_next_bit.o: ../../lib/find_next_bit.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o util/find_next_bit.o -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
+
+util/trace-event-perl.o: util/trace-event-perl.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o util/trace-event-perl.o -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
+
+scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c PERF-CFLAGS
+	$(QUIET_CC)$(CC) -o scripts/perl/Perf-Trace-Util/Context.o -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
+
 perf-%$X: %.o $(PERFLIBS)
 	$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
 
@@ -894,6 +986,13 @@
 install: all
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
 	$(INSTALL) perf$X '$(DESTDIR_SQ)$(bindir_SQ)'
+	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
+	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
+	$(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
+	$(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
+	$(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
+	$(INSTALL) scripts/perl/Perf-Trace-Util/Makefile.PL -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util'
+	$(INSTALL) scripts/perl/Perf-Trace-Util/README -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util'
 ifdef BUILT_INS
 	$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
 	$(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
@@ -979,7 +1078,7 @@
 #	$(RM) configure
 
 clean:
-	$(RM) *.o */*.o $(LIB_FILE)
+	$(RM) *.o */*.o */*/*.o */*/*/*.o $(LIB_FILE)
 	$(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X
 	$(RM) $(TEST_PROGRAMS)
 	$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
diff --git a/tools/perf/bench/bench.h b/tools/perf/bench/bench.h
new file mode 100644
index 0000000..f7781c6
--- /dev/null
+++ b/tools/perf/bench/bench.h
@@ -0,0 +1,17 @@
+#ifndef BENCH_H
+#define BENCH_H
+
+extern int bench_sched_messaging(int argc, const char **argv, const char *prefix);
+extern int bench_sched_pipe(int argc, const char **argv, const char *prefix);
+extern int bench_mem_memcpy(int argc, const char **argv, const char *prefix __used);
+
+#define BENCH_FORMAT_DEFAULT_STR	"default"
+#define BENCH_FORMAT_DEFAULT		0
+#define BENCH_FORMAT_SIMPLE_STR		"simple"
+#define BENCH_FORMAT_SIMPLE		1
+
+#define BENCH_FORMAT_UNKNOWN		-1
+
+extern int bench_format;
+
+#endif
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
new file mode 100644
index 0000000..8977317
--- /dev/null
+++ b/tools/perf/bench/mem-memcpy.c
@@ -0,0 +1,193 @@
+/*
+ * mem-memcpy.c
+ *
+ * memcpy: Simple memory copy in various ways
+ *
+ * Written by Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <ctype.h>
+
+#include "../perf.h"
+#include "../util/util.h"
+#include "../util/parse-options.h"
+#include "../util/string.h"
+#include "../util/header.h"
+#include "bench.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/time.h>
+#include <errno.h>
+
+#define K 1024
+
+static const char	*length_str	= "1MB";
+static const char	*routine	= "default";
+static int		use_clock	= 0;
+static int		clock_fd;
+
+static const struct option options[] = {
+	OPT_STRING('l', "length", &length_str, "1MB",
+		    "Specify length of memory to copy. "
+		    "available unit: B, MB, GB (upper and lower)"),
+	OPT_STRING('r', "routine", &routine, "default",
+		    "Specify routine to copy"),
+	OPT_BOOLEAN('c', "clock", &use_clock,
+		    "Use CPU clock for measuring"),
+	OPT_END()
+};
+
+struct routine {
+	const char *name;
+	const char *desc;
+	void * (*fn)(void *dst, const void *src, size_t len);
+};
+
+struct routine routines[] = {
+	{ "default",
+	  "Default memcpy() provided by glibc",
+	  memcpy },
+	{ NULL,
+	  NULL,
+	  NULL   }
+};
+
+static const char * const bench_mem_memcpy_usage[] = {
+	"perf bench mem memcpy <options>",
+	NULL
+};
+
+static struct perf_event_attr clock_attr = {
+	.type		= PERF_TYPE_HARDWARE,
+	.config		= PERF_COUNT_HW_CPU_CYCLES
+};
+
+static void init_clock(void)
+{
+	clock_fd = sys_perf_event_open(&clock_attr, getpid(), -1, -1, 0);
+
+	if (clock_fd < 0 && errno == ENOSYS)
+		die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
+	else
+		BUG_ON(clock_fd < 0);
+}
+
+static u64 get_clock(void)
+{
+	int ret;
+	u64 clk;
+
+	ret = read(clock_fd, &clk, sizeof(u64));
+	BUG_ON(ret != sizeof(u64));
+
+	return clk;
+}
+
+static double timeval2double(struct timeval *ts)
+{
+	return (double)ts->tv_sec +
+		(double)ts->tv_usec / (double)1000000;
+}
+
+int bench_mem_memcpy(int argc, const char **argv,
+		     const char *prefix __used)
+{
+	int i;
+	void *dst, *src;
+	size_t length;
+	double bps = 0.0;
+	struct timeval tv_start, tv_end, tv_diff;
+	u64 clock_start, clock_end, clock_diff;
+
+	clock_start = clock_end = clock_diff = 0ULL;
+	argc = parse_options(argc, argv, options,
+			     bench_mem_memcpy_usage, 0);
+
+	tv_diff.tv_sec = 0;
+	tv_diff.tv_usec = 0;
+	length = (size_t)perf_atoll((char *)length_str);
+
+	if ((s64)length <= 0) {
+		fprintf(stderr, "Invalid length:%s\n", length_str);
+		return 1;
+	}
+
+	for (i = 0; routines[i].name; i++) {
+		if (!strcmp(routines[i].name, routine))
+			break;
+	}
+	if (!routines[i].name) {
+		printf("Unknown routine:%s\n", routine);
+		printf("Available routines...\n");
+		for (i = 0; routines[i].name; i++) {
+			printf("\t%s ... %s\n",
+			       routines[i].name, routines[i].desc);
+		}
+		return 1;
+	}
+
+	dst = zalloc(length);
+	if (!dst)
+		die("memory allocation failed - maybe length is too large?\n");
+
+	src = zalloc(length);
+	if (!src)
+		die("memory allocation failed - maybe length is too large?\n");
+
+	if (bench_format == BENCH_FORMAT_DEFAULT) {
+		printf("# Copying %s Bytes from %p to %p ...\n\n",
+		       length_str, src, dst);
+	}
+
+	if (use_clock) {
+		init_clock();
+		clock_start = get_clock();
+	} else {
+		BUG_ON(gettimeofday(&tv_start, NULL));
+	}
+
+	routines[i].fn(dst, src, length);
+
+	if (use_clock) {
+		clock_end = get_clock();
+		clock_diff = clock_end - clock_start;
+	} else {
+		BUG_ON(gettimeofday(&tv_end, NULL));
+		timersub(&tv_end, &tv_start, &tv_diff);
+		bps = (double)((double)length / timeval2double(&tv_diff));
+	}
+
+	switch (bench_format) {
+	case BENCH_FORMAT_DEFAULT:
+		if (use_clock) {
+			printf(" %14lf Clock/Byte\n",
+			       (double)clock_diff / (double)length);
+		} else {
+			if (bps < K)
+				printf(" %14lf B/Sec\n", bps);
+			else if (bps < K * K)
+				printf(" %14lfd KB/Sec\n", bps / 1024);
+			else if (bps < K * K * K)
+				printf(" %14lf MB/Sec\n", bps / 1024 / 1024);
+			else {
+				printf(" %14lf GB/Sec\n",
+				       bps / 1024 / 1024 / 1024);
+			}
+		}
+		break;
+	case BENCH_FORMAT_SIMPLE:
+		if (use_clock) {
+			printf("%14lf\n",
+			       (double)clock_diff / (double)length);
+		} else
+			printf("%lf\n", bps);
+		break;
+	default:
+		/* reaching this means there's some disaster: */
+		die("unknown format: %d\n", bench_format);
+		break;
+	}
+
+	return 0;
+}
diff --git a/tools/perf/bench/sched-messaging.c b/tools/perf/bench/sched-messaging.c
new file mode 100644
index 0000000..605a2a9
--- /dev/null
+++ b/tools/perf/bench/sched-messaging.c
@@ -0,0 +1,336 @@
+/*
+ *
+ * builtin-bench-messaging.c
+ *
+ * messaging: Benchmark for scheduler and IPC mechanisms
+ *
+ * Based on hackbench by Rusty Russell <rusty@rustcorp.com.au>
+ * Ported to perf by Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ *
+ */
+
+#include "../perf.h"
+#include "../util/util.h"
+#include "../util/parse-options.h"
+#include "../builtin.h"
+#include "bench.h"
+
+/* Test groups of 20 processes spraying to 20 receivers */
+#include <pthread.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <sys/time.h>
+#include <sys/poll.h>
+#include <limits.h>
+
+#define DATASIZE 100
+
+static int use_pipes = 0;
+static unsigned int loops = 100;
+static unsigned int thread_mode = 0;
+static unsigned int num_groups = 10;
+
+struct sender_context {
+	unsigned int num_fds;
+	int ready_out;
+	int wakefd;
+	int out_fds[0];
+};
+
+struct receiver_context {
+	unsigned int num_packets;
+	int in_fds[2];
+	int ready_out;
+	int wakefd;
+};
+
+static void barf(const char *msg)
+{
+	fprintf(stderr, "%s (error: %s)\n", msg, strerror(errno));
+	exit(1);
+}
+
+static void fdpair(int fds[2])
+{
+	if (use_pipes) {
+		if (pipe(fds) == 0)
+			return;
+	} else {
+		if (socketpair(AF_UNIX, SOCK_STREAM, 0, fds) == 0)
+			return;
+	}
+
+	barf(use_pipes ? "pipe()" : "socketpair()");
+}
+
+/* Block until we're ready to go */
+static void ready(int ready_out, int wakefd)
+{
+	char dummy;
+	struct pollfd pollfd = { .fd = wakefd, .events = POLLIN };
+
+	/* Tell them we're ready. */
+	if (write(ready_out, &dummy, 1) != 1)
+		barf("CLIENT: ready write");
+
+	/* Wait for "GO" signal */
+	if (poll(&pollfd, 1, -1) != 1)
+		barf("poll");
+}
+
+/* Sender sprays loops messages down each file descriptor */
+static void *sender(struct sender_context *ctx)
+{
+	char data[DATASIZE];
+	unsigned int i, j;
+
+	ready(ctx->ready_out, ctx->wakefd);
+
+	/* Now pump to every receiver. */
+	for (i = 0; i < loops; i++) {
+		for (j = 0; j < ctx->num_fds; j++) {
+			int ret, done = 0;
+
+again:
+			ret = write(ctx->out_fds[j], data + done,
+				    sizeof(data)-done);
+			if (ret < 0)
+				barf("SENDER: write");
+			done += ret;
+			if (done < DATASIZE)
+				goto again;
+		}
+	}
+
+	return NULL;
+}
+
+
+/* One receiver per fd */
+static void *receiver(struct receiver_context* ctx)
+{
+	unsigned int i;
+
+	if (!thread_mode)
+		close(ctx->in_fds[1]);
+
+	/* Wait for start... */
+	ready(ctx->ready_out, ctx->wakefd);
+
+	/* Receive them all */
+	for (i = 0; i < ctx->num_packets; i++) {
+		char data[DATASIZE];
+		int ret, done = 0;
+
+again:
+		ret = read(ctx->in_fds[0], data + done, DATASIZE - done);
+		if (ret < 0)
+			barf("SERVER: read");
+		done += ret;
+		if (done < DATASIZE)
+			goto again;
+	}
+
+	return NULL;
+}
+
+static pthread_t create_worker(void *ctx, void *(*func)(void *))
+{
+	pthread_attr_t attr;
+	pthread_t childid;
+	int err;
+
+	if (!thread_mode) {
+		/* process mode */
+		/* Fork the receiver. */
+		switch (fork()) {
+		case -1:
+			barf("fork()");
+			break;
+		case 0:
+			(*func) (ctx);
+			exit(0);
+			break;
+		default:
+			break;
+		}
+
+		return (pthread_t)0;
+	}
+
+	if (pthread_attr_init(&attr) != 0)
+		barf("pthread_attr_init:");
+
+#ifndef __ia64__
+	if (pthread_attr_setstacksize(&attr, PTHREAD_STACK_MIN) != 0)
+		barf("pthread_attr_setstacksize");
+#endif
+
+	err = pthread_create(&childid, &attr, func, ctx);
+	if (err != 0) {
+		fprintf(stderr, "pthread_create failed: %s (%d)\n",
+			strerror(err), err);
+		exit(-1);
+	}
+	return childid;
+}
+
+static void reap_worker(pthread_t id)
+{
+	int proc_status;
+	void *thread_status;
+
+	if (!thread_mode) {
+		/* process mode */
+		wait(&proc_status);
+		if (!WIFEXITED(proc_status))
+			exit(1);
+	} else {
+		pthread_join(id, &thread_status);
+	}
+}
+
+/* One group of senders and receivers */
+static unsigned int group(pthread_t *pth,
+		unsigned int num_fds,
+		int ready_out,
+		int wakefd)
+{
+	unsigned int i;
+	struct sender_context *snd_ctx = malloc(sizeof(struct sender_context)
+			+ num_fds * sizeof(int));
+
+	if (!snd_ctx)
+		barf("malloc()");
+
+	for (i = 0; i < num_fds; i++) {
+		int fds[2];
+		struct receiver_context *ctx = malloc(sizeof(*ctx));
+
+		if (!ctx)
+			barf("malloc()");
+
+
+		/* Create the pipe between client and server */
+		fdpair(fds);
+
+		ctx->num_packets = num_fds * loops;
+		ctx->in_fds[0] = fds[0];
+		ctx->in_fds[1] = fds[1];
+		ctx->ready_out = ready_out;
+		ctx->wakefd = wakefd;
+
+		pth[i] = create_worker(ctx, (void *)receiver);
+
+		snd_ctx->out_fds[i] = fds[1];
+		if (!thread_mode)
+			close(fds[0]);
+	}
+
+	/* Now we have all the fds, fork the senders */
+	for (i = 0; i < num_fds; i++) {
+		snd_ctx->ready_out = ready_out;
+		snd_ctx->wakefd = wakefd;
+		snd_ctx->num_fds = num_fds;
+
+		pth[num_fds+i] = create_worker(snd_ctx, (void *)sender);
+	}
+
+	/* Close the fds we have left */
+	if (!thread_mode)
+		for (i = 0; i < num_fds; i++)
+			close(snd_ctx->out_fds[i]);
+
+	/* Return number of children to reap */
+	return num_fds * 2;
+}
+
+static const struct option options[] = {
+	OPT_BOOLEAN('p', "pipe", &use_pipes,
+		    "Use pipe() instead of socketpair()"),
+	OPT_BOOLEAN('t', "thread", &thread_mode,
+		    "Be multi thread instead of multi process"),
+	OPT_INTEGER('g', "group", &num_groups,
+		    "Specify number of groups"),
+	OPT_INTEGER('l', "loop", &loops,
+		    "Specify number of loops"),
+	OPT_END()
+};
+
+static const char * const bench_sched_message_usage[] = {
+	"perf bench sched messaging <options>",
+	NULL
+};
+
+int bench_sched_messaging(int argc, const char **argv,
+		    const char *prefix __used)
+{
+	unsigned int i, total_children;
+	struct timeval start, stop, diff;
+	unsigned int num_fds = 20;
+	int readyfds[2], wakefds[2];
+	char dummy;
+	pthread_t *pth_tab;
+
+	argc = parse_options(argc, argv, options,
+			     bench_sched_message_usage, 0);
+
+	pth_tab = malloc(num_fds * 2 * num_groups * sizeof(pthread_t));
+	if (!pth_tab)
+		barf("main:malloc()");
+
+	fdpair(readyfds);
+	fdpair(wakefds);
+
+	total_children = 0;
+	for (i = 0; i < num_groups; i++)
+		total_children += group(pth_tab+total_children, num_fds,
+					readyfds[1], wakefds[0]);
+
+	/* Wait for everyone to be ready */
+	for (i = 0; i < total_children; i++)
+		if (read(readyfds[0], &dummy, 1) != 1)
+			barf("Reading for readyfds");
+
+	gettimeofday(&start, NULL);
+
+	/* Kick them off */
+	if (write(wakefds[1], &dummy, 1) != 1)
+		barf("Writing to start them");
+
+	/* Reap them all */
+	for (i = 0; i < total_children; i++)
+		reap_worker(pth_tab[i]);
+
+	gettimeofday(&stop, NULL);
+
+	timersub(&stop, &start, &diff);
+
+	switch (bench_format) {
+	case BENCH_FORMAT_DEFAULT:
+		printf("# %d sender and receiver %s per group\n",
+		       num_fds, thread_mode ? "threads" : "processes");
+		printf("# %d groups == %d %s run\n\n",
+		       num_groups, num_groups * 2 * num_fds,
+		       thread_mode ? "threads" : "processes");
+		printf(" %14s: %lu.%03lu [sec]\n", "Total time",
+		       diff.tv_sec, diff.tv_usec/1000);
+		break;
+	case BENCH_FORMAT_SIMPLE:
+		printf("%lu.%03lu\n", diff.tv_sec, diff.tv_usec/1000);
+		break;
+	default:
+		/* reaching here is something disaster */
+		fprintf(stderr, "Unknown format:%d\n", bench_format);
+		exit(1);
+		break;
+	}
+
+	return 0;
+}
diff --git a/tools/perf/bench/sched-pipe.c b/tools/perf/bench/sched-pipe.c
new file mode 100644
index 0000000..238185f
--- /dev/null
+++ b/tools/perf/bench/sched-pipe.c
@@ -0,0 +1,124 @@
+/*
+ *
+ * builtin-bench-pipe.c
+ *
+ * pipe: Benchmark for pipe()
+ *
+ * Based on pipe-test-1m.c by Ingo Molnar <mingo@redhat.com>
+ *  http://people.redhat.com/mingo/cfs-scheduler/tools/pipe-test-1m.c
+ * Ported to perf by Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ *
+ */
+
+#include "../perf.h"
+#include "../util/util.h"
+#include "../util/parse-options.h"
+#include "../builtin.h"
+#include "bench.h"
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <sys/wait.h>
+#include <linux/unistd.h>
+#include <string.h>
+#include <errno.h>
+#include <assert.h>
+#include <sys/time.h>
+#include <sys/types.h>
+
+#define LOOPS_DEFAULT 1000000
+static int loops = LOOPS_DEFAULT;
+
+static const struct option options[] = {
+	OPT_INTEGER('l', "loop", &loops,
+		    "Specify number of loops"),
+	OPT_END()
+};
+
+static const char * const bench_sched_pipe_usage[] = {
+	"perf bench sched pipe <options>",
+	NULL
+};
+
+int bench_sched_pipe(int argc, const char **argv,
+		     const char *prefix __used)
+{
+	int pipe_1[2], pipe_2[2];
+	int m = 0, i;
+	struct timeval start, stop, diff;
+	unsigned long long result_usec = 0;
+
+	/*
+	 * why does "ret" exist?
+	 * discarding returned value of read(), write()
+	 * causes error in building environment for perf
+	 */
+	int ret, wait_stat;
+	pid_t pid, retpid;
+
+	argc = parse_options(argc, argv, options,
+			     bench_sched_pipe_usage, 0);
+
+	assert(!pipe(pipe_1));
+	assert(!pipe(pipe_2));
+
+	pid = fork();
+	assert(pid >= 0);
+
+	gettimeofday(&start, NULL);
+
+	if (!pid) {
+		for (i = 0; i < loops; i++) {
+			ret = read(pipe_1[0], &m, sizeof(int));
+			ret = write(pipe_2[1], &m, sizeof(int));
+		}
+	} else {
+		for (i = 0; i < loops; i++) {
+			ret = write(pipe_1[1], &m, sizeof(int));
+			ret = read(pipe_2[0], &m, sizeof(int));
+		}
+	}
+
+	gettimeofday(&stop, NULL);
+	timersub(&stop, &start, &diff);
+
+	if (pid) {
+		retpid = waitpid(pid, &wait_stat, 0);
+		assert((retpid == pid) && WIFEXITED(wait_stat));
+		return 0;
+	}
+
+	switch (bench_format) {
+	case BENCH_FORMAT_DEFAULT:
+		printf("# Extecuted %d pipe operations between two tasks\n\n",
+			loops);
+
+		result_usec = diff.tv_sec * 1000000;
+		result_usec += diff.tv_usec;
+
+		printf(" %14s: %lu.%03lu [sec]\n\n", "Total time",
+		       diff.tv_sec, diff.tv_usec/1000);
+
+		printf(" %14lf usecs/op\n",
+		       (double)result_usec / (double)loops);
+		printf(" %14d ops/sec\n",
+		       (int)((double)loops /
+			     ((double)result_usec / (double)1000000)));
+		break;
+
+	case BENCH_FORMAT_SIMPLE:
+		printf("%lu.%03lu\n",
+		       diff.tv_sec, diff.tv_usec / 1000);
+		break;
+
+	default:
+		/* reaching here is something disaster */
+		fprintf(stderr, "Unknown format:%d\n", bench_format);
+		exit(1);
+		break;
+	}
+
+	return 0;
+}
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 1ec7416..0bf2e8f9 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -19,29 +19,26 @@
 #include "perf.h"
 #include "util/debug.h"
 
+#include "util/event.h"
 #include "util/parse-options.h"
 #include "util/parse-events.h"
 #include "util/thread.h"
+#include "util/sort.h"
+#include "util/hist.h"
+#include "util/data_map.h"
 
 static char		const *input_name = "perf.data";
 
-static char		default_sort_order[] = "comm,symbol";
-static char		*sort_order = default_sort_order;
-
 static int		force;
-static int		input;
-static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
 
 static int		full_paths;
 
 static int		print_line;
 
-static unsigned long	page_size;
-static unsigned long	mmap_window = 32;
-
-static struct rb_root	threads;
-static struct thread	*last_match;
-
+struct sym_hist {
+	u64		sum;
+	u64		ip[0];
+};
 
 struct sym_ext {
 	struct rb_node	node;
@@ -49,247 +46,38 @@
 	char		*path;
 };
 
-/*
- * histogram, sorted on item, collects counts
- */
-
-static struct rb_root hist;
-
-struct hist_entry {
-	struct rb_node	 rb_node;
-
-	struct thread	 *thread;
-	struct map	 *map;
-	struct dso	 *dso;
-	struct symbol	 *sym;
-	u64	 ip;
-	char		 level;
-
-	uint32_t	 count;
+struct sym_priv {
+	struct sym_hist	*hist;
+	struct sym_ext	*ext;
 };
 
-/*
- * configurable sorting bits
- */
-
-struct sort_entry {
-	struct list_head list;
-
-	const char *header;
-
-	int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
-	int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
-	size_t	(*print)(FILE *fp, struct hist_entry *);
+static struct symbol_conf symbol_conf = {
+	.priv_size	  = sizeof(struct sym_priv),
+	.try_vmlinux_path = true,
 };
 
-/* --sort pid */
+static const char *sym_hist_filter;
 
-static int64_t
-sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
+static int symbol_filter(struct map *map __used, struct symbol *sym)
 {
-	return right->thread->pid - left->thread->pid;
-}
+	if (sym_hist_filter == NULL ||
+	    strcmp(sym->name, sym_hist_filter) == 0) {
+		struct sym_priv *priv = symbol__priv(sym);
+		const int size = (sizeof(*priv->hist) +
+				  (sym->end - sym->start) * sizeof(u64));
 
-static size_t
-sort__thread_print(FILE *fp, struct hist_entry *self)
-{
-	return fprintf(fp, "%16s:%5d", self->thread->comm ?: "", self->thread->pid);
-}
-
-static struct sort_entry sort_thread = {
-	.header = "         Command:  Pid",
-	.cmp	= sort__thread_cmp,
-	.print	= sort__thread_print,
-};
-
-/* --sort comm */
-
-static int64_t
-sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	return right->thread->pid - left->thread->pid;
-}
-
-static int64_t
-sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
-{
-	char *comm_l = left->thread->comm;
-	char *comm_r = right->thread->comm;
-
-	if (!comm_l || !comm_r) {
-		if (!comm_l && !comm_r)
-			return 0;
-		else if (!comm_l)
-			return -1;
-		else
-			return 1;
-	}
-
-	return strcmp(comm_l, comm_r);
-}
-
-static size_t
-sort__comm_print(FILE *fp, struct hist_entry *self)
-{
-	return fprintf(fp, "%16s", self->thread->comm);
-}
-
-static struct sort_entry sort_comm = {
-	.header		= "         Command",
-	.cmp		= sort__comm_cmp,
-	.collapse	= sort__comm_collapse,
-	.print		= sort__comm_print,
-};
-
-/* --sort dso */
-
-static int64_t
-sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	struct dso *dso_l = left->dso;
-	struct dso *dso_r = right->dso;
-
-	if (!dso_l || !dso_r) {
-		if (!dso_l && !dso_r)
-			return 0;
-		else if (!dso_l)
-			return -1;
-		else
-			return 1;
-	}
-
-	return strcmp(dso_l->name, dso_r->name);
-}
-
-static size_t
-sort__dso_print(FILE *fp, struct hist_entry *self)
-{
-	if (self->dso)
-		return fprintf(fp, "%-25s", self->dso->name);
-
-	return fprintf(fp, "%016llx         ", (u64)self->ip);
-}
-
-static struct sort_entry sort_dso = {
-	.header = "Shared Object            ",
-	.cmp	= sort__dso_cmp,
-	.print	= sort__dso_print,
-};
-
-/* --sort symbol */
-
-static int64_t
-sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	u64 ip_l, ip_r;
-
-	if (left->sym == right->sym)
-		return 0;
-
-	ip_l = left->sym ? left->sym->start : left->ip;
-	ip_r = right->sym ? right->sym->start : right->ip;
-
-	return (int64_t)(ip_r - ip_l);
-}
-
-static size_t
-sort__sym_print(FILE *fp, struct hist_entry *self)
-{
-	size_t ret = 0;
-
-	if (verbose)
-		ret += fprintf(fp, "%#018llx  ", (u64)self->ip);
-
-	if (self->sym) {
-		ret += fprintf(fp, "[%c] %s",
-			self->dso == kernel_dso ? 'k' : '.', self->sym->name);
-	} else {
-		ret += fprintf(fp, "%#016llx", (u64)self->ip);
-	}
-
-	return ret;
-}
-
-static struct sort_entry sort_sym = {
-	.header = "Symbol",
-	.cmp	= sort__sym_cmp,
-	.print	= sort__sym_print,
-};
-
-static int sort__need_collapse = 0;
-
-struct sort_dimension {
-	const char		*name;
-	struct sort_entry	*entry;
-	int			taken;
-};
-
-static struct sort_dimension sort_dimensions[] = {
-	{ .name = "pid",	.entry = &sort_thread,	},
-	{ .name = "comm",	.entry = &sort_comm,	},
-	{ .name = "dso",	.entry = &sort_dso,	},
-	{ .name = "symbol",	.entry = &sort_sym,	},
-};
-
-static LIST_HEAD(hist_entry__sort_list);
-
-static int sort_dimension__add(char *tok)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
-		struct sort_dimension *sd = &sort_dimensions[i];
-
-		if (sd->taken)
-			continue;
-
-		if (strncasecmp(tok, sd->name, strlen(tok)))
-			continue;
-
-		if (sd->entry->collapse)
-			sort__need_collapse = 1;
-
-		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
-		sd->taken = 1;
-
+		priv->hist = malloc(size);
+		if (priv->hist)
+			memset(priv->hist, 0, size);
 		return 0;
 	}
-
-	return -ESRCH;
-}
-
-static int64_t
-hist_entry__cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	struct sort_entry *se;
-	int64_t cmp = 0;
-
-	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		cmp = se->cmp(left, right);
-		if (cmp)
-			break;
-	}
-
-	return cmp;
-}
-
-static int64_t
-hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
-{
-	struct sort_entry *se;
-	int64_t cmp = 0;
-
-	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		int64_t (*f)(struct hist_entry *, struct hist_entry *);
-
-		f = se->collapse ?: se->cmp;
-
-		cmp = f(left, right);
-		if (cmp)
-			break;
-	}
-
-	return cmp;
+	/*
+	 * FIXME: We should really filter it out, as we don't want to go thru symbols
+	 * we're not interested, and if a DSO ends up with no symbols, delete it too,
+	 * but right now the kernel loading routines in symbol.c bail out if no symbols
+	 * are found, fix it later.
+	 */
+	return 0;
 }
 
 /*
@@ -299,380 +87,81 @@
 {
 	unsigned int sym_size, offset;
 	struct symbol *sym = he->sym;
+	struct sym_priv *priv;
+	struct sym_hist *h;
 
 	he->count++;
 
-	if (!sym || !sym->hist)
+	if (!sym || !he->map)
+		return;
+
+	priv = symbol__priv(sym);
+	if (!priv->hist)
 		return;
 
 	sym_size = sym->end - sym->start;
 	offset = ip - sym->start;
 
+	if (verbose)
+		fprintf(stderr, "%s: ip=%Lx\n", __func__,
+			he->map->unmap_ip(he->map, ip));
+
 	if (offset >= sym_size)
 		return;
 
-	sym->hist_sum++;
-	sym->hist[offset]++;
+	h = priv->hist;
+	h->sum++;
+	h->ip[offset]++;
 
 	if (verbose >= 3)
 		printf("%p %s: count++ [ip: %p, %08Lx] => %Ld\n",
 			(void *)(unsigned long)he->sym->start,
 			he->sym->name,
 			(void *)(unsigned long)ip, ip - he->sym->start,
-			sym->hist[offset]);
+			h->ip[offset]);
 }
 
-static int
-hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
-		struct symbol *sym, u64 ip, char level)
+static int hist_entry__add(struct addr_location *al, u64 count)
 {
-	struct rb_node **p = &hist.rb_node;
-	struct rb_node *parent = NULL;
-	struct hist_entry *he;
-	struct hist_entry entry = {
-		.thread	= thread,
-		.map	= map,
-		.dso	= dso,
-		.sym	= sym,
-		.ip	= ip,
-		.level	= level,
-		.count	= 1,
-	};
-	int cmp;
-
-	while (*p != NULL) {
-		parent = *p;
-		he = rb_entry(parent, struct hist_entry, rb_node);
-
-		cmp = hist_entry__cmp(&entry, he);
-
-		if (!cmp) {
-			hist_hit(he, ip);
-
-			return 0;
-		}
-
-		if (cmp < 0)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	he = malloc(sizeof(*he));
-	if (!he)
+	bool hit;
+	struct hist_entry *he = __hist_entry__add(al, NULL, count, &hit);
+	if (he == NULL)
 		return -ENOMEM;
-	*he = entry;
-	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &hist);
-
+	hist_hit(he, al->addr);
 	return 0;
 }
 
-static void hist_entry__free(struct hist_entry *he)
+static int process_sample_event(event_t *event)
 {
-	free(he);
-}
+	struct addr_location al;
 
-/*
- * collapse the histogram
- */
+	dump_printf("(IP, %d): %d: %p\n", event->header.misc,
+		    event->ip.pid, (void *)(long)event->ip.ip);
 
-static struct rb_root collapse_hists;
-
-static void collapse__insert_entry(struct hist_entry *he)
-{
-	struct rb_node **p = &collapse_hists.rb_node;
-	struct rb_node *parent = NULL;
-	struct hist_entry *iter;
-	int64_t cmp;
-
-	while (*p != NULL) {
-		parent = *p;
-		iter = rb_entry(parent, struct hist_entry, rb_node);
-
-		cmp = hist_entry__collapse(iter, he);
-
-		if (!cmp) {
-			iter->count += he->count;
-			hist_entry__free(he);
-			return;
-		}
-
-		if (cmp < 0)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &collapse_hists);
-}
-
-static void collapse__resort(void)
-{
-	struct rb_node *next;
-	struct hist_entry *n;
-
-	if (!sort__need_collapse)
-		return;
-
-	next = rb_first(&hist);
-	while (next) {
-		n = rb_entry(next, struct hist_entry, rb_node);
-		next = rb_next(&n->rb_node);
-
-		rb_erase(&n->rb_node, &hist);
-		collapse__insert_entry(n);
-	}
-}
-
-/*
- * reverse the map, sort on count.
- */
-
-static struct rb_root output_hists;
-
-static void output__insert_entry(struct hist_entry *he)
-{
-	struct rb_node **p = &output_hists.rb_node;
-	struct rb_node *parent = NULL;
-	struct hist_entry *iter;
-
-	while (*p != NULL) {
-		parent = *p;
-		iter = rb_entry(parent, struct hist_entry, rb_node);
-
-		if (he->count > iter->count)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &output_hists);
-}
-
-static void output__resort(void)
-{
-	struct rb_node *next;
-	struct hist_entry *n;
-	struct rb_root *tree = &hist;
-
-	if (sort__need_collapse)
-		tree = &collapse_hists;
-
-	next = rb_first(tree);
-
-	while (next) {
-		n = rb_entry(next, struct hist_entry, rb_node);
-		next = rb_next(&n->rb_node);
-
-		rb_erase(&n->rb_node, tree);
-		output__insert_entry(n);
-	}
-}
-
-static unsigned long total = 0,
-		     total_mmap = 0,
-		     total_comm = 0,
-		     total_fork = 0,
-		     total_unknown = 0;
-
-static int
-process_sample_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	char level;
-	int show = 0;
-	struct dso *dso = NULL;
-	struct thread *thread;
-	u64 ip = event->ip.ip;
-	struct map *map = NULL;
-
-	thread = threads__findnew(event->ip.pid, &threads, &last_match);
-
-	dump_printf("%p [%p]: PERF_EVENT (IP, %d): %d: %p\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->header.misc,
-		event->ip.pid,
-		(void *)(long)ip);
-
-	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
-
-	if (thread == NULL) {
+	if (event__preprocess_sample(event, &al, symbol_filter) < 0) {
 		fprintf(stderr, "problem processing %d event, skipping it.\n",
 			event->header.type);
 		return -1;
 	}
 
-	if (event->header.misc & PERF_RECORD_MISC_KERNEL) {
-		show = SHOW_KERNEL;
-		level = 'k';
-
-		dso = kernel_dso;
-
-		dump_printf(" ...... dso: %s\n", dso->name);
-
-	} else if (event->header.misc & PERF_RECORD_MISC_USER) {
-
-		show = SHOW_USER;
-		level = '.';
-
-		map = thread__find_map(thread, ip);
-		if (map != NULL) {
-			ip = map->map_ip(map, ip);
-			dso = map->dso;
-		} else {
-			/*
-			 * If this is outside of all known maps,
-			 * and is a negative address, try to look it
-			 * up in the kernel dso, as it might be a
-			 * vsyscall (which executes in user-mode):
-			 */
-			if ((long long)ip < 0)
-				dso = kernel_dso;
-		}
-		dump_printf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
-
-	} else {
-		show = SHOW_HV;
-		level = 'H';
-		dump_printf(" ...... dso: [hypervisor]\n");
-	}
-
-	if (show & show_mask) {
-		struct symbol *sym = NULL;
-
-		if (dso)
-			sym = dso->find_symbol(dso, ip);
-
-		if (hist_entry__add(thread, map, dso, sym, ip, level)) {
-			fprintf(stderr,
-		"problem incrementing symbol count, skipping event\n");
-			return -1;
-		}
-	}
-	total++;
-
-	return 0;
-}
-
-static int
-process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	struct thread *thread;
-	struct map *map = map__new(&event->mmap, NULL, 0);
-
-	thread = threads__findnew(event->mmap.pid, &threads, &last_match);
-
-	dump_printf("%p [%p]: PERF_RECORD_MMAP %d: [%p(%p) @ %p]: %s\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->mmap.pid,
-		(void *)(long)event->mmap.start,
-		(void *)(long)event->mmap.len,
-		(void *)(long)event->mmap.pgoff,
-		event->mmap.filename);
-
-	if (thread == NULL || map == NULL) {
-		dump_printf("problem processing PERF_RECORD_MMAP, skipping event.\n");
-		return 0;
-	}
-
-	thread__insert_map(thread, map);
-	total_mmap++;
-
-	return 0;
-}
-
-static int
-process_comm_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	struct thread *thread;
-
-	thread = threads__findnew(event->comm.pid, &threads, &last_match);
-	dump_printf("%p [%p]: PERF_RECORD_COMM: %s:%d\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->comm.comm, event->comm.pid);
-
-	if (thread == NULL ||
-	    thread__set_comm(thread, event->comm.comm)) {
-		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
-		return -1;
-	}
-	total_comm++;
-
-	return 0;
-}
-
-static int
-process_fork_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	struct thread *thread;
-	struct thread *parent;
-
-	thread = threads__findnew(event->fork.pid, &threads, &last_match);
-	parent = threads__findnew(event->fork.ppid, &threads, &last_match);
-	dump_printf("%p [%p]: PERF_RECORD_FORK: %d:%d\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->fork.pid, event->fork.ppid);
-
-	/*
-	 * A thread clone will have the same PID for both
-	 * parent and child.
-	 */
-	if (thread == parent)
-		return 0;
-
-	if (!thread || !parent || thread__fork(thread, parent)) {
-		dump_printf("problem processing PERF_RECORD_FORK, skipping event.\n");
-		return -1;
-	}
-	total_fork++;
-
-	return 0;
-}
-
-static int
-process_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	switch (event->header.type) {
-	case PERF_RECORD_SAMPLE:
-		return process_sample_event(event, offset, head);
-
-	case PERF_RECORD_MMAP:
-		return process_mmap_event(event, offset, head);
-
-	case PERF_RECORD_COMM:
-		return process_comm_event(event, offset, head);
-
-	case PERF_RECORD_FORK:
-		return process_fork_event(event, offset, head);
-	/*
-	 * We dont process them right now but they are fine:
-	 */
-
-	case PERF_RECORD_THROTTLE:
-	case PERF_RECORD_UNTHROTTLE:
-		return 0;
-
-	default:
+	if (hist_entry__add(&al, 1)) {
+		fprintf(stderr, "problem incrementing symbol count, "
+				"skipping event\n");
 		return -1;
 	}
 
 	return 0;
 }
 
-static int
-parse_line(FILE *file, struct symbol *sym, u64 start, u64 len)
+static int parse_line(FILE *file, struct hist_entry *he, u64 len)
 {
+	struct symbol *sym = he->sym;
 	char *line = NULL, *tmp, *tmp2;
 	static const char *prev_line;
 	static const char *prev_color;
 	unsigned int offset;
 	size_t line_len;
+	u64 start;
 	s64 line_ip;
 	int ret;
 	char *c;
@@ -709,22 +198,26 @@
 			line_ip = -1;
 	}
 
+	start = he->map->unmap_ip(he->map, sym->start);
+
 	if (line_ip != -1) {
 		const char *path = NULL;
 		unsigned int hits = 0;
 		double percent = 0.0;
 		const char *color;
-		struct sym_ext *sym_ext = sym->priv;
+		struct sym_priv *priv = symbol__priv(sym);
+		struct sym_ext *sym_ext = priv->ext;
+		struct sym_hist *h = priv->hist;
 
 		offset = line_ip - start;
 		if (offset < len)
-			hits = sym->hist[offset];
+			hits = h->ip[offset];
 
 		if (offset < len && sym_ext) {
 			path = sym_ext[offset].path;
 			percent = sym_ext[offset].percent;
-		} else if (sym->hist_sum)
-			percent = 100.0 * hits / sym->hist_sum;
+		} else if (h->sum)
+			percent = 100.0 * hits / h->sum;
 
 		color = get_percent_color(percent);
 
@@ -777,9 +270,10 @@
 	rb_insert_color(&sym_ext->node, &root_sym_ext);
 }
 
-static void free_source_line(struct symbol *sym, int len)
+static void free_source_line(struct hist_entry *he, int len)
 {
-	struct sym_ext *sym_ext = sym->priv;
+	struct sym_priv *priv = symbol__priv(he->sym);
+	struct sym_ext *sym_ext = priv->ext;
 	int i;
 
 	if (!sym_ext)
@@ -789,26 +283,30 @@
 		free(sym_ext[i].path);
 	free(sym_ext);
 
-	sym->priv = NULL;
+	priv->ext = NULL;
 	root_sym_ext = RB_ROOT;
 }
 
 /* Get the filename:line for the colored entries */
 static void
-get_source_line(struct symbol *sym, u64 start, int len, const char *filename)
+get_source_line(struct hist_entry *he, int len, const char *filename)
 {
+	struct symbol *sym = he->sym;
+	u64 start;
 	int i;
 	char cmd[PATH_MAX * 2];
 	struct sym_ext *sym_ext;
+	struct sym_priv *priv = symbol__priv(sym);
+	struct sym_hist *h = priv->hist;
 
-	if (!sym->hist_sum)
+	if (!h->sum)
 		return;
 
-	sym->priv = calloc(len, sizeof(struct sym_ext));
-	if (!sym->priv)
+	sym_ext = priv->ext = calloc(len, sizeof(struct sym_ext));
+	if (!priv->ext)
 		return;
 
-	sym_ext = sym->priv;
+	start = he->map->unmap_ip(he->map, sym->start);
 
 	for (i = 0; i < len; i++) {
 		char *path = NULL;
@@ -816,7 +314,7 @@
 		u64 offset;
 		FILE *fp;
 
-		sym_ext[i].percent = 100.0 * sym->hist[i] / sym->hist_sum;
+		sym_ext[i].percent = 100.0 * h->ip[i] / h->sum;
 		if (sym_ext[i].percent <= 0.5)
 			continue;
 
@@ -870,33 +368,34 @@
 	}
 }
 
-static void annotate_sym(struct dso *dso, struct symbol *sym)
+static void annotate_sym(struct hist_entry *he)
 {
-	const char *filename = dso->name, *d_filename;
-	u64 start, end, len;
+	struct map *map = he->map;
+	struct dso *dso = map->dso;
+	struct symbol *sym = he->sym;
+	const char *filename = dso->long_name, *d_filename;
+	u64 len;
 	char command[PATH_MAX*2];
 	FILE *file;
 
 	if (!filename)
 		return;
-	if (sym->module)
-		filename = sym->module->path;
-	else if (dso == kernel_dso)
-		filename = vmlinux_name;
 
-	start = sym->obj_start;
-	if (!start)
-		start = sym->start;
+	if (verbose)
+		fprintf(stderr, "%s: filename=%s, sym=%s, start=%Lx, end=%Lx\n",
+			__func__, filename, sym->name,
+			map->unmap_ip(map, sym->start),
+			map->unmap_ip(map, sym->end));
+
 	if (full_paths)
 		d_filename = filename;
 	else
 		d_filename = basename(filename);
 
-	end = start + sym->end - sym->start + 1;
 	len = sym->end - sym->start;
 
 	if (print_line) {
-		get_source_line(sym, start, len, filename);
+		get_source_line(he, len, filename);
 		print_summary(filename);
 	}
 
@@ -905,10 +404,12 @@
 	printf("------------------------------------------------\n");
 
 	if (verbose >= 2)
-		printf("annotating [%p] %30s : [%p] %30s\n", dso, dso->name, sym, sym->name);
+		printf("annotating [%p] %30s : [%p] %30s\n",
+		       dso, dso->long_name, sym, sym->name);
 
 	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s|grep -v %s",
-			(u64)start, (u64)end, filename, filename);
+		map->unmap_ip(map, sym->start), map->unmap_ip(map, sym->end),
+		filename, filename);
 
 	if (verbose >= 3)
 		printf("doing: %s\n", command);
@@ -918,159 +419,78 @@
 		return;
 
 	while (!feof(file)) {
-		if (parse_line(file, sym, start, len) < 0)
+		if (parse_line(file, he, len) < 0)
 			break;
 	}
 
 	pclose(file);
 	if (print_line)
-		free_source_line(sym, len);
+		free_source_line(he, len);
 }
 
 static void find_annotations(void)
 {
 	struct rb_node *nd;
-	struct dso *dso;
-	int count = 0;
 
-	list_for_each_entry(dso, &dsos, node) {
+	for (nd = rb_first(&output_hists); nd; nd = rb_next(nd)) {
+		struct hist_entry *he = rb_entry(nd, struct hist_entry, rb_node);
+		struct sym_priv *priv;
 
-		for (nd = rb_first(&dso->syms); nd; nd = rb_next(nd)) {
-			struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
+		if (he->sym == NULL)
+			continue;
 
-			if (sym->hist) {
-				annotate_sym(dso, sym);
-				count++;
-			}
-		}
+		priv = symbol__priv(he->sym);
+		if (priv->hist == NULL)
+			continue;
+
+		annotate_sym(he);
+		/*
+		 * Since we have a hist_entry per IP for the same symbol, free
+		 * he->sym->hist to signal we already processed this symbol.
+		 */
+		free(priv->hist);
+		priv->hist = NULL;
 	}
-
-	if (!count)
-		printf(" Error: symbol '%s' not present amongst the samples.\n", sym_hist_filter);
 }
 
+static struct perf_file_handler file_handler = {
+	.process_sample_event	= process_sample_event,
+	.process_mmap_event	= event__process_mmap,
+	.process_comm_event	= event__process_comm,
+	.process_fork_event	= event__process_task,
+};
+
 static int __cmd_annotate(void)
 {
-	int ret, rc = EXIT_FAILURE;
-	unsigned long offset = 0;
-	unsigned long head = 0;
-	struct stat input_stat;
-	event_t *event;
-	uint32_t size;
-	char *buf;
+	struct perf_header *header;
+	struct thread *idle;
+	int ret;
 
-	register_idle_thread(&threads, &last_match);
+	idle = register_idle_thread();
+	register_perf_file_handler(&file_handler);
 
-	input = open(input_name, O_RDONLY);
-	if (input < 0) {
-		perror("failed to open file");
-		exit(-1);
-	}
+	ret = mmap_dispatch_perf_file(&header, input_name, 0, 0,
+				      &event__cwdlen, &event__cwd);
+	if (ret)
+		return ret;
 
-	ret = fstat(input, &input_stat);
-	if (ret < 0) {
-		perror("failed to stat file");
-		exit(-1);
-	}
-
-	if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
-		fprintf(stderr, "file: %s not owned by current user or root\n", input_name);
-		exit(-1);
-	}
-
-	if (!input_stat.st_size) {
-		fprintf(stderr, "zero-sized file, nothing to do!\n");
-		exit(0);
-	}
-
-	if (load_kernel() < 0) {
-		perror("failed to load kernel symbols");
-		return EXIT_FAILURE;
-	}
-
-remap:
-	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
-			   MAP_SHARED, input, offset);
-	if (buf == MAP_FAILED) {
-		perror("failed to mmap file");
-		exit(-1);
-	}
-
-more:
-	event = (event_t *)(buf + head);
-
-	size = event->header.size;
-	if (!size)
-		size = 8;
-
-	if (head + event->header.size >= page_size * mmap_window) {
-		unsigned long shift = page_size * (head / page_size);
-		int munmap_ret;
-
-		munmap_ret = munmap(buf, page_size * mmap_window);
-		assert(munmap_ret == 0);
-
-		offset += shift;
-		head -= shift;
-		goto remap;
-	}
-
-	size = event->header.size;
-
-	dump_printf("%p [%p]: event: %d\n",
-			(void *)(offset + head),
-			(void *)(long)event->header.size,
-			event->header.type);
-
-	if (!size || process_event(event, offset, head) < 0) {
-
-		dump_printf("%p [%p]: skipping unknown header type: %d\n",
-			(void *)(offset + head),
-			(void *)(long)(event->header.size),
-			event->header.type);
-
-		total_unknown++;
-
-		/*
-		 * assume we lost track of the stream, check alignment, and
-		 * increment a single u64 in the hope to catch on again 'soon'.
-		 */
-
-		if (unlikely(head & 7))
-			head &= ~7ULL;
-
-		size = 8;
-	}
-
-	head += size;
-
-	if (offset + head < (unsigned long)input_stat.st_size)
-		goto more;
-
-	rc = EXIT_SUCCESS;
-	close(input);
-
-	dump_printf("      IP events: %10ld\n", total);
-	dump_printf("    mmap events: %10ld\n", total_mmap);
-	dump_printf("    comm events: %10ld\n", total_comm);
-	dump_printf("    fork events: %10ld\n", total_fork);
-	dump_printf(" unknown events: %10ld\n", total_unknown);
-
-	if (dump_trace)
+	if (dump_trace) {
+		event__print_totals();
 		return 0;
+	}
 
-	if (verbose >= 3)
-		threads__fprintf(stdout, &threads);
+	if (verbose > 3)
+		threads__fprintf(stdout);
 
-	if (verbose >= 2)
+	if (verbose > 2)
 		dsos__fprintf(stdout);
 
 	collapse__resort();
-	output__resort();
+	output__resort(event__total[0]);
 
 	find_annotations();
 
-	return rc;
+	return ret;
 }
 
 static const char * const annotate_usage[] = {
@@ -1088,8 +508,9 @@
 		    "be more verbose (show symbol address, etc)"),
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
-	OPT_STRING('k', "vmlinux", &vmlinux_name, "file", "vmlinux pathname"),
-	OPT_BOOLEAN('m', "modules", &modules,
+	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
+		   "file", "vmlinux pathname"),
+	OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
 		    "load module symbols - WARNING: use only with -k and LIVE kernel"),
 	OPT_BOOLEAN('l', "print-line", &print_line,
 		    "print matching source lines (may be slow)"),
@@ -1115,9 +536,8 @@
 
 int cmd_annotate(int argc, const char **argv, const char *prefix __used)
 {
-	symbol__init();
-
-	page_size = getpagesize();
+	if (symbol__init(&symbol_conf) < 0)
+		return -1;
 
 	argc = parse_options(argc, argv, options, annotate_usage, 0);
 
@@ -1134,10 +554,13 @@
 		sym_hist_filter = argv[0];
 	}
 
-	if (!sym_hist_filter)
-		usage_with_options(annotate_usage, options);
-
 	setup_pager();
 
+	if (field_sep && *field_sep == '.') {
+		fputs("'.' is the only non valid --field-separator argument\n",
+				stderr);
+		exit(129);
+	}
+
 	return __cmd_annotate();
 }
diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
new file mode 100644
index 0000000..e043eb8
--- /dev/null
+++ b/tools/perf/builtin-bench.c
@@ -0,0 +1,196 @@
+/*
+ *
+ * builtin-bench.c
+ *
+ * General benchmarking subsystem provided by perf
+ *
+ * Copyright (C) 2009, Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ *
+ */
+
+/*
+ *
+ * Available subsystem list:
+ *  sched ... scheduler and IPC mechanism
+ *  mem   ... memory access performance
+ *
+ */
+
+#include "perf.h"
+#include "util/util.h"
+#include "util/parse-options.h"
+#include "builtin.h"
+#include "bench/bench.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+struct bench_suite {
+	const char *name;
+	const char *summary;
+	int (*fn)(int, const char **, const char *);
+};
+
+static struct bench_suite sched_suites[] = {
+	{ "messaging",
+	  "Benchmark for scheduler and IPC mechanisms",
+	  bench_sched_messaging },
+	{ "pipe",
+	  "Flood of communication over pipe() between two processes",
+	  bench_sched_pipe      },
+	{ NULL,
+	  NULL,
+	  NULL                  }
+};
+
+static struct bench_suite mem_suites[] = {
+	{ "memcpy",
+	  "Simple memory copy in various ways",
+	  bench_mem_memcpy },
+	{ NULL,
+	  NULL,
+	  NULL             }
+};
+
+struct bench_subsys {
+	const char *name;
+	const char *summary;
+	struct bench_suite *suites;
+};
+
+static struct bench_subsys subsystems[] = {
+	{ "sched",
+	  "scheduler and IPC mechanism",
+	  sched_suites },
+	{ "mem",
+	  "memory access performance",
+	  mem_suites },
+	{ NULL,
+	  NULL,
+	  NULL       }
+};
+
+static void dump_suites(int subsys_index)
+{
+	int i;
+
+	printf("List of available suites for %s...\n\n",
+	       subsystems[subsys_index].name);
+
+	for (i = 0; subsystems[subsys_index].suites[i].name; i++)
+		printf("\t%s: %s\n",
+		       subsystems[subsys_index].suites[i].name,
+		       subsystems[subsys_index].suites[i].summary);
+
+	printf("\n");
+	return;
+}
+
+static char *bench_format_str;
+int bench_format = BENCH_FORMAT_DEFAULT;
+
+static const struct option bench_options[] = {
+	OPT_STRING('f', "format", &bench_format_str, "default",
+		    "Specify format style"),
+	OPT_END()
+};
+
+static const char * const bench_usage[] = {
+	"perf bench [<common options>] <subsystem> <suite> [<options>]",
+	NULL
+};
+
+static void print_usage(void)
+{
+	int i;
+
+	printf("Usage: \n");
+	for (i = 0; bench_usage[i]; i++)
+		printf("\t%s\n", bench_usage[i]);
+	printf("\n");
+
+	printf("List of available subsystems...\n\n");
+
+	for (i = 0; subsystems[i].name; i++)
+		printf("\t%s: %s\n",
+		       subsystems[i].name, subsystems[i].summary);
+	printf("\n");
+}
+
+static int bench_str2int(char *str)
+{
+	if (!str)
+		return BENCH_FORMAT_DEFAULT;
+
+	if (!strcmp(str, BENCH_FORMAT_DEFAULT_STR))
+		return BENCH_FORMAT_DEFAULT;
+	else if (!strcmp(str, BENCH_FORMAT_SIMPLE_STR))
+		return BENCH_FORMAT_SIMPLE;
+
+	return BENCH_FORMAT_UNKNOWN;
+}
+
+int cmd_bench(int argc, const char **argv, const char *prefix __used)
+{
+	int i, j, status = 0;
+
+	if (argc < 2) {
+		/* No subsystem specified. */
+		print_usage();
+		goto end;
+	}
+
+	argc = parse_options(argc, argv, bench_options, bench_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+
+	bench_format = bench_str2int(bench_format_str);
+	if (bench_format == BENCH_FORMAT_UNKNOWN) {
+		printf("Unknown format descriptor:%s\n", bench_format_str);
+		goto end;
+	}
+
+	if (argc < 1) {
+		print_usage();
+		goto end;
+	}
+
+	for (i = 0; subsystems[i].name; i++) {
+		if (strcmp(subsystems[i].name, argv[0]))
+			continue;
+
+		if (argc < 2) {
+			/* No suite specified. */
+			dump_suites(i);
+			goto end;
+		}
+
+		for (j = 0; subsystems[i].suites[j].name; j++) {
+			if (strcmp(subsystems[i].suites[j].name, argv[1]))
+				continue;
+
+			if (bench_format == BENCH_FORMAT_DEFAULT)
+				printf("# Running %s/%s benchmark...\n",
+				       subsystems[i].name,
+				       subsystems[i].suites[j].name);
+			status = subsystems[i].suites[j].fn(argc - 1,
+							    argv + 1, prefix);
+			goto end;
+		}
+
+		if (!strcmp(argv[1], "-h") || !strcmp(argv[1], "--help")) {
+			dump_suites(i);
+			goto end;
+		}
+
+		printf("Unknown suite:%s for %s\n", argv[1], argv[0]);
+		status = 1;
+		goto end;
+	}
+
+	printf("Unknown subsystem:%s\n", argv[0]);
+	status = 1;
+
+end:
+	return status;
+}
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
new file mode 100644
index 0000000..7dee9d19
--- /dev/null
+++ b/tools/perf/builtin-buildid-list.c
@@ -0,0 +1,116 @@
+/*
+ * builtin-buildid-list.c
+ *
+ * Builtin buildid-list command: list buildids in perf.data
+ *
+ * Copyright (C) 2009, Red Hat Inc.
+ * Copyright (C) 2009, Arnaldo Carvalho de Melo <acme@redhat.com>
+ */
+#include "builtin.h"
+#include "perf.h"
+#include "util/cache.h"
+#include "util/data_map.h"
+#include "util/debug.h"
+#include "util/header.h"
+#include "util/parse-options.h"
+#include "util/symbol.h"
+
+static char const *input_name = "perf.data";
+static int force;
+
+static const char *const buildid_list_usage[] = {
+	"perf report [<options>]",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_STRING('i', "input", &input_name, "file",
+		    "input file name"),
+	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose"),
+	OPT_END()
+};
+
+static int perf_file_section__process_buildids(struct perf_file_section *self,
+					       int feat, int fd)
+{
+	if (feat != HEADER_BUILD_ID)
+		return 0;
+
+	if (lseek(fd, self->offset, SEEK_SET) < 0) {
+		pr_warning("Failed to lseek to %Ld offset for buildids!\n",
+			   self->offset);
+		return -1;
+	}
+
+	if (perf_header__read_build_ids(fd, self->offset, self->size)) {
+		pr_warning("Failed to read buildids!\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int __cmd_buildid_list(void)
+{
+	int err = -1;
+	struct perf_header *header;
+	struct perf_file_header f_header;
+	struct stat input_stat;
+	int input = open(input_name, O_RDONLY);
+
+	if (input < 0) {
+		pr_err("failed to open file: %s", input_name);
+		if (!strcmp(input_name, "perf.data"))
+			pr_err("  (try 'perf record' first)");
+		pr_err("\n");
+		goto out;
+	}
+
+	err = fstat(input, &input_stat);
+	if (err < 0) {
+		perror("failed to stat file");
+		goto out_close;
+	}
+
+	if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
+		pr_err("file %s not owned by current user or root\n",
+		       input_name);
+		goto out_close;
+	}
+
+	if (!input_stat.st_size) {
+		pr_info("zero-sized file, nothing to do!\n");
+		goto out_close;
+	}
+
+	err = -1;
+	header = perf_header__new();
+	if (header == NULL)
+		goto out_close;
+
+	if (perf_file_header__read(&f_header, header, input) < 0) {
+		pr_warning("incompatible file format");
+		goto out_close;
+	}
+
+	err = perf_header__process_sections(header, input,
+				         perf_file_section__process_buildids);
+
+	if (err < 0)
+		goto out_close;
+
+	dsos__fprintf_buildid(stdout);
+out_close:
+	close(input);
+out:
+	return err;
+}
+
+int cmd_buildid_list(int argc, const char **argv, const char *prefix __used)
+{
+	argc = parse_options(argc, argv, options, buildid_list_usage, 0);
+	setup_pager();
+	return __cmd_buildid_list();
+}
diff --git a/tools/perf/builtin-help.c b/tools/perf/builtin-help.c
index 4fb8734..9f810b1 100644
--- a/tools/perf/builtin-help.c
+++ b/tools/perf/builtin-help.c
@@ -61,8 +61,7 @@
 {
 	struct man_viewer_info_list *viewer;
 
-	for (viewer = man_viewer_info_list; viewer; viewer = viewer->next)
-	{
+	for (viewer = man_viewer_info_list; viewer; viewer = viewer->next) {
 		if (!strcasecmp(name, viewer->name))
 			return viewer->info;
 	}
@@ -115,7 +114,7 @@
 	return 0;
 }
 
-static void exec_woman_emacs(const char* path, const char *page)
+static void exec_woman_emacs(const char *path, const char *page)
 {
 	if (!check_emacsclient_version()) {
 		/* This works only with emacsclient version >= 22. */
@@ -129,7 +128,7 @@
 	}
 }
 
-static void exec_man_konqueror(const char* path, const char *page)
+static void exec_man_konqueror(const char *path, const char *page)
 {
 	const char *display = getenv("DISPLAY");
 	if (display && *display) {
@@ -157,7 +156,7 @@
 	}
 }
 
-static void exec_man_man(const char* path, const char *page)
+static void exec_man_man(const char *path, const char *page)
 {
 	if (!path)
 		path = "man";
@@ -180,7 +179,7 @@
 
 	while (*p)
 		p = &((*p)->next);
-	*p = calloc(1, (sizeof(**p) + len + 1));
+	*p = zalloc(sizeof(**p) + len + 1);
 	strncpy((*p)->name, name, len);
 }
 
@@ -195,7 +194,7 @@
 				   size_t len,
 				   const char *value)
 {
-	struct man_viewer_info_list *new = calloc(1, sizeof(*new) + len + 1);
+	struct man_viewer_info_list *new = zalloc(sizeof(*new) + len + 1);
 
 	strncpy(new->name, name, len);
 	new->info = strdup(value);
@@ -364,9 +363,8 @@
 
 	setup_man_path();
 	for (viewer = man_viewer_list; viewer; viewer = viewer->next)
-	{
 		exec_viewer(viewer->name, page); /* will return when unable */
-	}
+
 	if (fallback)
 		exec_viewer(fallback, page);
 	exec_viewer("man", page);
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
new file mode 100644
index 0000000..047fef7
--- /dev/null
+++ b/tools/perf/builtin-kmem.c
@@ -0,0 +1,807 @@
+#include "builtin.h"
+#include "perf.h"
+
+#include "util/util.h"
+#include "util/cache.h"
+#include "util/symbol.h"
+#include "util/thread.h"
+#include "util/header.h"
+
+#include "util/parse-options.h"
+#include "util/trace-event.h"
+
+#include "util/debug.h"
+#include "util/data_map.h"
+
+#include <linux/rbtree.h>
+
+struct alloc_stat;
+typedef int (*sort_fn_t)(struct alloc_stat *, struct alloc_stat *);
+
+static char const		*input_name = "perf.data";
+
+static struct perf_header	*header;
+static u64			sample_type;
+
+static int			alloc_flag;
+static int			caller_flag;
+
+static int			alloc_lines = -1;
+static int			caller_lines = -1;
+
+static bool			raw_ip;
+
+static char			default_sort_order[] = "frag,hit,bytes";
+
+static int			*cpunode_map;
+static int			max_cpu_num;
+
+struct alloc_stat {
+	u64	call_site;
+	u64	ptr;
+	u64	bytes_req;
+	u64	bytes_alloc;
+	u32	hit;
+	u32	pingpong;
+
+	short	alloc_cpu;
+
+	struct rb_node node;
+};
+
+static struct rb_root root_alloc_stat;
+static struct rb_root root_alloc_sorted;
+static struct rb_root root_caller_stat;
+static struct rb_root root_caller_sorted;
+
+static unsigned long total_requested, total_allocated;
+static unsigned long nr_allocs, nr_cross_allocs;
+
+struct raw_event_sample {
+	u32 size;
+	char data[0];
+};
+
+#define PATH_SYS_NODE	"/sys/devices/system/node"
+
+static void init_cpunode_map(void)
+{
+	FILE *fp;
+	int i;
+
+	fp = fopen("/sys/devices/system/cpu/kernel_max", "r");
+	if (!fp) {
+		max_cpu_num = 4096;
+		return;
+	}
+
+	if (fscanf(fp, "%d", &max_cpu_num) < 1)
+		die("Failed to read 'kernel_max' from sysfs");
+	max_cpu_num++;
+
+	cpunode_map = calloc(max_cpu_num, sizeof(int));
+	if (!cpunode_map)
+		die("calloc");
+	for (i = 0; i < max_cpu_num; i++)
+		cpunode_map[i] = -1;
+	fclose(fp);
+}
+
+static void setup_cpunode_map(void)
+{
+	struct dirent *dent1, *dent2;
+	DIR *dir1, *dir2;
+	unsigned int cpu, mem;
+	char buf[PATH_MAX];
+
+	init_cpunode_map();
+
+	dir1 = opendir(PATH_SYS_NODE);
+	if (!dir1)
+		return;
+
+	while (true) {
+		dent1 = readdir(dir1);
+		if (!dent1)
+			break;
+
+		if (sscanf(dent1->d_name, "node%u", &mem) < 1)
+			continue;
+
+		snprintf(buf, PATH_MAX, "%s/%s", PATH_SYS_NODE, dent1->d_name);
+		dir2 = opendir(buf);
+		if (!dir2)
+			continue;
+		while (true) {
+			dent2 = readdir(dir2);
+			if (!dent2)
+				break;
+			if (sscanf(dent2->d_name, "cpu%u", &cpu) < 1)
+				continue;
+			cpunode_map[cpu] = mem;
+		}
+	}
+}
+
+static void insert_alloc_stat(unsigned long call_site, unsigned long ptr,
+			      int bytes_req, int bytes_alloc, int cpu)
+{
+	struct rb_node **node = &root_alloc_stat.rb_node;
+	struct rb_node *parent = NULL;
+	struct alloc_stat *data = NULL;
+
+	while (*node) {
+		parent = *node;
+		data = rb_entry(*node, struct alloc_stat, node);
+
+		if (ptr > data->ptr)
+			node = &(*node)->rb_right;
+		else if (ptr < data->ptr)
+			node = &(*node)->rb_left;
+		else
+			break;
+	}
+
+	if (data && data->ptr == ptr) {
+		data->hit++;
+		data->bytes_req += bytes_req;
+		data->bytes_alloc += bytes_req;
+	} else {
+		data = malloc(sizeof(*data));
+		if (!data)
+			die("malloc");
+		data->ptr = ptr;
+		data->pingpong = 0;
+		data->hit = 1;
+		data->bytes_req = bytes_req;
+		data->bytes_alloc = bytes_alloc;
+
+		rb_link_node(&data->node, parent, node);
+		rb_insert_color(&data->node, &root_alloc_stat);
+	}
+	data->call_site = call_site;
+	data->alloc_cpu = cpu;
+}
+
+static void insert_caller_stat(unsigned long call_site,
+			      int bytes_req, int bytes_alloc)
+{
+	struct rb_node **node = &root_caller_stat.rb_node;
+	struct rb_node *parent = NULL;
+	struct alloc_stat *data = NULL;
+
+	while (*node) {
+		parent = *node;
+		data = rb_entry(*node, struct alloc_stat, node);
+
+		if (call_site > data->call_site)
+			node = &(*node)->rb_right;
+		else if (call_site < data->call_site)
+			node = &(*node)->rb_left;
+		else
+			break;
+	}
+
+	if (data && data->call_site == call_site) {
+		data->hit++;
+		data->bytes_req += bytes_req;
+		data->bytes_alloc += bytes_req;
+	} else {
+		data = malloc(sizeof(*data));
+		if (!data)
+			die("malloc");
+		data->call_site = call_site;
+		data->pingpong = 0;
+		data->hit = 1;
+		data->bytes_req = bytes_req;
+		data->bytes_alloc = bytes_alloc;
+
+		rb_link_node(&data->node, parent, node);
+		rb_insert_color(&data->node, &root_caller_stat);
+	}
+}
+
+static void process_alloc_event(struct raw_event_sample *raw,
+				struct event *event,
+				int cpu,
+				u64 timestamp __used,
+				struct thread *thread __used,
+				int node)
+{
+	unsigned long call_site;
+	unsigned long ptr;
+	int bytes_req;
+	int bytes_alloc;
+	int node1, node2;
+
+	ptr = raw_field_value(event, "ptr", raw->data);
+	call_site = raw_field_value(event, "call_site", raw->data);
+	bytes_req = raw_field_value(event, "bytes_req", raw->data);
+	bytes_alloc = raw_field_value(event, "bytes_alloc", raw->data);
+
+	insert_alloc_stat(call_site, ptr, bytes_req, bytes_alloc, cpu);
+	insert_caller_stat(call_site, bytes_req, bytes_alloc);
+
+	total_requested += bytes_req;
+	total_allocated += bytes_alloc;
+
+	if (node) {
+		node1 = cpunode_map[cpu];
+		node2 = raw_field_value(event, "node", raw->data);
+		if (node1 != node2)
+			nr_cross_allocs++;
+	}
+	nr_allocs++;
+}
+
+static int ptr_cmp(struct alloc_stat *, struct alloc_stat *);
+static int callsite_cmp(struct alloc_stat *, struct alloc_stat *);
+
+static struct alloc_stat *search_alloc_stat(unsigned long ptr,
+					    unsigned long call_site,
+					    struct rb_root *root,
+					    sort_fn_t sort_fn)
+{
+	struct rb_node *node = root->rb_node;
+	struct alloc_stat key = { .ptr = ptr, .call_site = call_site };
+
+	while (node) {
+		struct alloc_stat *data;
+		int cmp;
+
+		data = rb_entry(node, struct alloc_stat, node);
+
+		cmp = sort_fn(&key, data);
+		if (cmp < 0)
+			node = node->rb_left;
+		else if (cmp > 0)
+			node = node->rb_right;
+		else
+			return data;
+	}
+	return NULL;
+}
+
+static void process_free_event(struct raw_event_sample *raw,
+			       struct event *event,
+			       int cpu,
+			       u64 timestamp __used,
+			       struct thread *thread __used)
+{
+	unsigned long ptr;
+	struct alloc_stat *s_alloc, *s_caller;
+
+	ptr = raw_field_value(event, "ptr", raw->data);
+
+	s_alloc = search_alloc_stat(ptr, 0, &root_alloc_stat, ptr_cmp);
+	if (!s_alloc)
+		return;
+
+	if (cpu != s_alloc->alloc_cpu) {
+		s_alloc->pingpong++;
+
+		s_caller = search_alloc_stat(0, s_alloc->call_site,
+					     &root_caller_stat, callsite_cmp);
+		assert(s_caller);
+		s_caller->pingpong++;
+	}
+	s_alloc->alloc_cpu = -1;
+}
+
+static void
+process_raw_event(event_t *raw_event __used, void *more_data,
+		  int cpu, u64 timestamp, struct thread *thread)
+{
+	struct raw_event_sample *raw = more_data;
+	struct event *event;
+	int type;
+
+	type = trace_parse_common_type(raw->data);
+	event = trace_find_event(type);
+
+	if (!strcmp(event->name, "kmalloc") ||
+	    !strcmp(event->name, "kmem_cache_alloc")) {
+		process_alloc_event(raw, event, cpu, timestamp, thread, 0);
+		return;
+	}
+
+	if (!strcmp(event->name, "kmalloc_node") ||
+	    !strcmp(event->name, "kmem_cache_alloc_node")) {
+		process_alloc_event(raw, event, cpu, timestamp, thread, 1);
+		return;
+	}
+
+	if (!strcmp(event->name, "kfree") ||
+	    !strcmp(event->name, "kmem_cache_free")) {
+		process_free_event(raw, event, cpu, timestamp, thread);
+		return;
+	}
+}
+
+static int process_sample_event(event_t *event)
+{
+	u64 ip = event->ip.ip;
+	u64 timestamp = -1;
+	u32 cpu = -1;
+	u64 period = 1;
+	void *more_data = event->ip.__more_data;
+	struct thread *thread = threads__findnew(event->ip.pid);
+
+	if (sample_type & PERF_SAMPLE_TIME) {
+		timestamp = *(u64 *)more_data;
+		more_data += sizeof(u64);
+	}
+
+	if (sample_type & PERF_SAMPLE_CPU) {
+		cpu = *(u32 *)more_data;
+		more_data += sizeof(u32);
+		more_data += sizeof(u32); /* reserved */
+	}
+
+	if (sample_type & PERF_SAMPLE_PERIOD) {
+		period = *(u64 *)more_data;
+		more_data += sizeof(u64);
+	}
+
+	dump_printf("(IP, %d): %d/%d: %p period: %Ld\n",
+		event->header.misc,
+		event->ip.pid, event->ip.tid,
+		(void *)(long)ip,
+		(long long)period);
+
+	if (thread == NULL) {
+		pr_debug("problem processing %d event, skipping it.\n",
+			 event->header.type);
+		return -1;
+	}
+
+	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
+	process_raw_event(event, more_data, cpu, timestamp, thread);
+
+	return 0;
+}
+
+static int sample_type_check(u64 type)
+{
+	sample_type = type;
+
+	if (!(sample_type & PERF_SAMPLE_RAW)) {
+		fprintf(stderr,
+			"No trace sample to read. Did you call perf record "
+			"without -R?");
+		return -1;
+	}
+
+	return 0;
+}
+
+static struct perf_file_handler file_handler = {
+	.process_sample_event	= process_sample_event,
+	.process_comm_event	= event__process_comm,
+	.sample_type_check	= sample_type_check,
+};
+
+static int read_events(void)
+{
+	register_idle_thread();
+	register_perf_file_handler(&file_handler);
+
+	return mmap_dispatch_perf_file(&header, input_name, 0, 0,
+				       &event__cwdlen, &event__cwd);
+}
+
+static double fragmentation(unsigned long n_req, unsigned long n_alloc)
+{
+	if (n_alloc == 0)
+		return 0.0;
+	else
+		return 100.0 - (100.0 * n_req / n_alloc);
+}
+
+static void __print_result(struct rb_root *root, int n_lines, int is_caller)
+{
+	struct rb_node *next;
+
+	printf("%.102s\n", graph_dotted_line);
+	printf(" %-34s |",  is_caller ? "Callsite": "Alloc Ptr");
+	printf(" Total_alloc/Per | Total_req/Per   | Hit   | Ping-pong | Frag\n");
+	printf("%.102s\n", graph_dotted_line);
+
+	next = rb_first(root);
+
+	while (next && n_lines--) {
+		struct alloc_stat *data = rb_entry(next, struct alloc_stat,
+						   node);
+		struct symbol *sym = NULL;
+		char buf[BUFSIZ];
+		u64 addr;
+
+		if (is_caller) {
+			addr = data->call_site;
+			if (!raw_ip)
+				sym = thread__find_function(kthread, addr, NULL);
+		} else
+			addr = data->ptr;
+
+		if (sym != NULL)
+			snprintf(buf, sizeof(buf), "%s+%Lx", sym->name,
+				 addr - sym->start);
+		else
+			snprintf(buf, sizeof(buf), "%#Lx", addr);
+		printf(" %-34s |", buf);
+
+		printf(" %9llu/%-5lu | %9llu/%-5lu | %6lu | %8lu | %6.3f%%\n",
+		       (unsigned long long)data->bytes_alloc,
+		       (unsigned long)data->bytes_alloc / data->hit,
+		       (unsigned long long)data->bytes_req,
+		       (unsigned long)data->bytes_req / data->hit,
+		       (unsigned long)data->hit,
+		       (unsigned long)data->pingpong,
+		       fragmentation(data->bytes_req, data->bytes_alloc));
+
+		next = rb_next(next);
+	}
+
+	if (n_lines == -1)
+		printf(" ...                                | ...             | ...             | ...    | ...      | ...   \n");
+
+	printf("%.102s\n", graph_dotted_line);
+}
+
+static void print_summary(void)
+{
+	printf("\nSUMMARY\n=======\n");
+	printf("Total bytes requested: %lu\n", total_requested);
+	printf("Total bytes allocated: %lu\n", total_allocated);
+	printf("Total bytes wasted on internal fragmentation: %lu\n",
+	       total_allocated - total_requested);
+	printf("Internal fragmentation: %f%%\n",
+	       fragmentation(total_requested, total_allocated));
+	printf("Cross CPU allocations: %lu/%lu\n", nr_cross_allocs, nr_allocs);
+}
+
+static void print_result(void)
+{
+	if (caller_flag)
+		__print_result(&root_caller_sorted, caller_lines, 1);
+	if (alloc_flag)
+		__print_result(&root_alloc_sorted, alloc_lines, 0);
+	print_summary();
+}
+
+struct sort_dimension {
+	const char		name[20];
+	sort_fn_t		cmp;
+	struct list_head	list;
+};
+
+static LIST_HEAD(caller_sort);
+static LIST_HEAD(alloc_sort);
+
+static void sort_insert(struct rb_root *root, struct alloc_stat *data,
+			struct list_head *sort_list)
+{
+	struct rb_node **new = &(root->rb_node);
+	struct rb_node *parent = NULL;
+	struct sort_dimension *sort;
+
+	while (*new) {
+		struct alloc_stat *this;
+		int cmp = 0;
+
+		this = rb_entry(*new, struct alloc_stat, node);
+		parent = *new;
+
+		list_for_each_entry(sort, sort_list, list) {
+			cmp = sort->cmp(data, this);
+			if (cmp)
+				break;
+		}
+
+		if (cmp > 0)
+			new = &((*new)->rb_left);
+		else
+			new = &((*new)->rb_right);
+	}
+
+	rb_link_node(&data->node, parent, new);
+	rb_insert_color(&data->node, root);
+}
+
+static void __sort_result(struct rb_root *root, struct rb_root *root_sorted,
+			  struct list_head *sort_list)
+{
+	struct rb_node *node;
+	struct alloc_stat *data;
+
+	for (;;) {
+		node = rb_first(root);
+		if (!node)
+			break;
+
+		rb_erase(node, root);
+		data = rb_entry(node, struct alloc_stat, node);
+		sort_insert(root_sorted, data, sort_list);
+	}
+}
+
+static void sort_result(void)
+{
+	__sort_result(&root_alloc_stat, &root_alloc_sorted, &alloc_sort);
+	__sort_result(&root_caller_stat, &root_caller_sorted, &caller_sort);
+}
+
+static int __cmd_kmem(void)
+{
+	setup_pager();
+	read_events();
+	sort_result();
+	print_result();
+
+	return 0;
+}
+
+static const char * const kmem_usage[] = {
+	"perf kmem [<options>] {record}",
+	NULL
+};
+
+static int ptr_cmp(struct alloc_stat *l, struct alloc_stat *r)
+{
+	if (l->ptr < r->ptr)
+		return -1;
+	else if (l->ptr > r->ptr)
+		return 1;
+	return 0;
+}
+
+static struct sort_dimension ptr_sort_dimension = {
+	.name	= "ptr",
+	.cmp	= ptr_cmp,
+};
+
+static int callsite_cmp(struct alloc_stat *l, struct alloc_stat *r)
+{
+	if (l->call_site < r->call_site)
+		return -1;
+	else if (l->call_site > r->call_site)
+		return 1;
+	return 0;
+}
+
+static struct sort_dimension callsite_sort_dimension = {
+	.name	= "callsite",
+	.cmp	= callsite_cmp,
+};
+
+static int hit_cmp(struct alloc_stat *l, struct alloc_stat *r)
+{
+	if (l->hit < r->hit)
+		return -1;
+	else if (l->hit > r->hit)
+		return 1;
+	return 0;
+}
+
+static struct sort_dimension hit_sort_dimension = {
+	.name	= "hit",
+	.cmp	= hit_cmp,
+};
+
+static int bytes_cmp(struct alloc_stat *l, struct alloc_stat *r)
+{
+	if (l->bytes_alloc < r->bytes_alloc)
+		return -1;
+	else if (l->bytes_alloc > r->bytes_alloc)
+		return 1;
+	return 0;
+}
+
+static struct sort_dimension bytes_sort_dimension = {
+	.name	= "bytes",
+	.cmp	= bytes_cmp,
+};
+
+static int frag_cmp(struct alloc_stat *l, struct alloc_stat *r)
+{
+	double x, y;
+
+	x = fragmentation(l->bytes_req, l->bytes_alloc);
+	y = fragmentation(r->bytes_req, r->bytes_alloc);
+
+	if (x < y)
+		return -1;
+	else if (x > y)
+		return 1;
+	return 0;
+}
+
+static struct sort_dimension frag_sort_dimension = {
+	.name	= "frag",
+	.cmp	= frag_cmp,
+};
+
+static int pingpong_cmp(struct alloc_stat *l, struct alloc_stat *r)
+{
+	if (l->pingpong < r->pingpong)
+		return -1;
+	else if (l->pingpong > r->pingpong)
+		return 1;
+	return 0;
+}
+
+static struct sort_dimension pingpong_sort_dimension = {
+	.name	= "pingpong",
+	.cmp	= pingpong_cmp,
+};
+
+static struct sort_dimension *avail_sorts[] = {
+	&ptr_sort_dimension,
+	&callsite_sort_dimension,
+	&hit_sort_dimension,
+	&bytes_sort_dimension,
+	&frag_sort_dimension,
+	&pingpong_sort_dimension,
+};
+
+#define NUM_AVAIL_SORTS	\
+	(int)(sizeof(avail_sorts) / sizeof(struct sort_dimension *))
+
+static int sort_dimension__add(const char *tok, struct list_head *list)
+{
+	struct sort_dimension *sort;
+	int i;
+
+	for (i = 0; i < NUM_AVAIL_SORTS; i++) {
+		if (!strcmp(avail_sorts[i]->name, tok)) {
+			sort = malloc(sizeof(*sort));
+			if (!sort)
+				die("malloc");
+			memcpy(sort, avail_sorts[i], sizeof(*sort));
+			list_add_tail(&sort->list, list);
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+static int setup_sorting(struct list_head *sort_list, const char *arg)
+{
+	char *tok;
+	char *str = strdup(arg);
+
+	if (!str)
+		die("strdup");
+
+	while (true) {
+		tok = strsep(&str, ",");
+		if (!tok)
+			break;
+		if (sort_dimension__add(tok, sort_list) < 0) {
+			error("Unknown --sort key: '%s'", tok);
+			return -1;
+		}
+	}
+
+	free(str);
+	return 0;
+}
+
+static int parse_sort_opt(const struct option *opt __used,
+			  const char *arg, int unset __used)
+{
+	if (!arg)
+		return -1;
+
+	if (caller_flag > alloc_flag)
+		return setup_sorting(&caller_sort, arg);
+	else
+		return setup_sorting(&alloc_sort, arg);
+
+	return 0;
+}
+
+static int parse_stat_opt(const struct option *opt __used,
+			  const char *arg, int unset __used)
+{
+	if (!arg)
+		return -1;
+
+	if (strcmp(arg, "alloc") == 0)
+		alloc_flag = (caller_flag + 1);
+	else if (strcmp(arg, "caller") == 0)
+		caller_flag = (alloc_flag + 1);
+	else
+		return -1;
+	return 0;
+}
+
+static int parse_line_opt(const struct option *opt __used,
+			  const char *arg, int unset __used)
+{
+	int lines;
+
+	if (!arg)
+		return -1;
+
+	lines = strtoul(arg, NULL, 10);
+
+	if (caller_flag > alloc_flag)
+		caller_lines = lines;
+	else
+		alloc_lines = lines;
+
+	return 0;
+}
+
+static const struct option kmem_options[] = {
+	OPT_STRING('i', "input", &input_name, "file",
+		   "input file name"),
+	OPT_CALLBACK(0, "stat", NULL, "<alloc>|<caller>",
+		     "stat selector, Pass 'alloc' or 'caller'.",
+		     parse_stat_opt),
+	OPT_CALLBACK('s', "sort", NULL, "key[,key2...]",
+		     "sort by keys: ptr, call_site, bytes, hit, pingpong, frag",
+		     parse_sort_opt),
+	OPT_CALLBACK('l', "line", NULL, "num",
+		     "show n lins",
+		     parse_line_opt),
+	OPT_BOOLEAN(0, "raw-ip", &raw_ip, "show raw ip instead of symbol"),
+	OPT_END()
+};
+
+static const char *record_args[] = {
+	"record",
+	"-a",
+	"-R",
+	"-M",
+	"-f",
+	"-c", "1",
+	"-e", "kmem:kmalloc",
+	"-e", "kmem:kmalloc_node",
+	"-e", "kmem:kfree",
+	"-e", "kmem:kmem_cache_alloc",
+	"-e", "kmem:kmem_cache_alloc_node",
+	"-e", "kmem:kmem_cache_free",
+};
+
+static int __cmd_record(int argc, const char **argv)
+{
+	unsigned int rec_argc, i, j;
+	const char **rec_argv;
+
+	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
+	rec_argv = calloc(rec_argc + 1, sizeof(char *));
+
+	for (i = 0; i < ARRAY_SIZE(record_args); i++)
+		rec_argv[i] = strdup(record_args[i]);
+
+	for (j = 1; j < (unsigned int)argc; j++, i++)
+		rec_argv[i] = argv[j];
+
+	return cmd_record(i, rec_argv, NULL);
+}
+
+int cmd_kmem(int argc, const char **argv, const char *prefix __used)
+{
+	symbol__init(0);
+
+	argc = parse_options(argc, argv, kmem_options, kmem_usage, 0);
+
+	if (argc && !strncmp(argv[0], "rec", 3))
+		return __cmd_record(argc, argv);
+	else if (argc)
+		usage_with_options(kmem_usage, kmem_options);
+
+	if (list_empty(&caller_sort))
+		setup_sorting(&caller_sort, default_sort_order);
+	if (list_empty(&alloc_sort))
+		setup_sorting(&alloc_sort, default_sort_order);
+
+	setup_cpunode_map();
+
+	return __cmd_kmem();
+}
+
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
new file mode 100644
index 0000000..a58e11b
--- /dev/null
+++ b/tools/perf/builtin-probe.c
@@ -0,0 +1,242 @@
+/*
+ * builtin-probe.c
+ *
+ * Builtin probe command: Set up probe events by C expression
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#define _GNU_SOURCE
+#include <sys/utsname.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#undef _GNU_SOURCE
+#include "perf.h"
+#include "builtin.h"
+#include "util/util.h"
+#include "util/event.h"
+#include "util/debug.h"
+#include "util/parse-options.h"
+#include "util/parse-events.h"	/* For debugfs_path */
+#include "util/probe-finder.h"
+#include "util/probe-event.h"
+
+/* Default vmlinux search paths */
+#define NR_SEARCH_PATH 3
+const char *default_search_path[NR_SEARCH_PATH] = {
+"/lib/modules/%s/build/vmlinux",		/* Custom build kernel */
+"/usr/lib/debug/lib/modules/%s/vmlinux",	/* Red Hat debuginfo */
+"/boot/vmlinux-debug-%s",			/* Ubuntu */
+};
+
+#define MAX_PATH_LEN 256
+#define MAX_PROBES 128
+
+/* Session management structure */
+static struct {
+	char *vmlinux;
+	char *release;
+	int need_dwarf;
+	int nr_probe;
+	struct probe_point probes[MAX_PROBES];
+} session;
+
+static bool listing;
+
+/* Parse an event definition. Note that any error must die. */
+static void parse_probe_event(const char *str)
+{
+	struct probe_point *pp = &session.probes[session.nr_probe];
+
+	pr_debug("probe-definition(%d): %s\n", session.nr_probe, str);
+	if (++session.nr_probe == MAX_PROBES)
+		die("Too many probes (> %d) are specified.", MAX_PROBES);
+
+	/* Parse perf-probe event into probe_point */
+	session.need_dwarf = parse_perf_probe_event(str, pp);
+
+	pr_debug("%d arguments\n", pp->nr_args);
+}
+
+static int opt_add_probe_event(const struct option *opt __used,
+			      const char *str, int unset __used)
+{
+	if (str)
+		parse_probe_event(str);
+	return 0;
+}
+
+#ifndef NO_LIBDWARF
+static int open_default_vmlinux(void)
+{
+	struct utsname uts;
+	char fname[MAX_PATH_LEN];
+	int fd, ret, i;
+
+	ret = uname(&uts);
+	if (ret) {
+		pr_debug("uname() failed.\n");
+		return -errno;
+	}
+	session.release = uts.release;
+	for (i = 0; i < NR_SEARCH_PATH; i++) {
+		ret = snprintf(fname, MAX_PATH_LEN,
+			       default_search_path[i], session.release);
+		if (ret >= MAX_PATH_LEN || ret < 0) {
+			pr_debug("Filename(%d,%s) is too long.\n", i,
+				uts.release);
+			errno = E2BIG;
+			return -E2BIG;
+		}
+		pr_debug("try to open %s\n", fname);
+		fd = open(fname, O_RDONLY);
+		if (fd >= 0)
+			break;
+	}
+	return fd;
+}
+#endif
+
+static const char * const probe_usage[] = {
+	"perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]",
+	"perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]",
+	"perf probe --list",
+	NULL
+};
+
+static const struct option options[] = {
+	OPT_BOOLEAN('v', "verbose", &verbose,
+		    "be more verbose (show parsed arguments, etc)"),
+#ifndef NO_LIBDWARF
+	OPT_STRING('k', "vmlinux", &session.vmlinux, "file",
+		"vmlinux/module pathname"),
+#endif
+	OPT_BOOLEAN('l', "list", &listing, "list up current probes"),
+	OPT_CALLBACK('a', "add", NULL,
+#ifdef NO_LIBDWARF
+		"FUNC[+OFFS|%return] [ARG ...]",
+#else
+		"FUNC[+OFFS|%return|:RLN][@SRC]|SRC:ALN [ARG ...]",
+#endif
+		"probe point definition, where\n"
+		"\t\tGRP:\tGroup name (optional)\n"
+		"\t\tNAME:\tEvent name\n"
+		"\t\tFUNC:\tFunction name\n"
+		"\t\tOFFS:\tOffset from function entry (in byte)\n"
+		"\t\t%return:\tPut the probe at function return\n"
+#ifdef NO_LIBDWARF
+		"\t\tARG:\tProbe argument (only \n"
+#else
+		"\t\tSRC:\tSource code path\n"
+		"\t\tRLN:\tRelative line number from function entry.\n"
+		"\t\tALN:\tAbsolute line number in file.\n"
+		"\t\tARG:\tProbe argument (local variable name or\n"
+#endif
+		"\t\t\tkprobe-tracer argument format.)\n",
+		opt_add_probe_event),
+	OPT_END()
+};
+
+int cmd_probe(int argc, const char **argv, const char *prefix __used)
+{
+	int i, j, ret;
+#ifndef NO_LIBDWARF
+	int fd;
+#endif
+	struct probe_point *pp;
+
+	argc = parse_options(argc, argv, options, probe_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+	for (i = 0; i < argc; i++)
+		parse_probe_event(argv[i]);
+
+	if ((session.nr_probe == 0 && !listing) ||
+	    (session.nr_probe != 0 && listing))
+		usage_with_options(probe_usage, options);
+
+	if (listing) {
+		show_perf_probe_events();
+		return 0;
+	}
+
+	if (session.need_dwarf)
+#ifdef NO_LIBDWARF
+		die("Debuginfo-analysis is not supported");
+#else	/* !NO_LIBDWARF */
+		pr_debug("Some probes require debuginfo.\n");
+
+	if (session.vmlinux)
+		fd = open(session.vmlinux, O_RDONLY);
+	else
+		fd = open_default_vmlinux();
+	if (fd < 0) {
+		if (session.need_dwarf)
+			die("Could not open vmlinux/module file.");
+
+		pr_warning("Could not open vmlinux/module file."
+			   " Try to use symbols.\n");
+		goto end_dwarf;
+	}
+
+	/* Searching probe points */
+	for (j = 0; j < session.nr_probe; j++) {
+		pp = &session.probes[j];
+		if (pp->found)
+			continue;
+
+		lseek(fd, SEEK_SET, 0);
+		ret = find_probepoint(fd, pp);
+		if (ret < 0) {
+			if (session.need_dwarf)
+				die("Could not analyze debuginfo.");
+
+			pr_warning("An error occurred in debuginfo analysis. Try to use symbols.\n");
+			break;
+		}
+		if (ret == 0)	/* No error but failed to find probe point. */
+			die("No probe point found.");
+	}
+	close(fd);
+
+end_dwarf:
+#endif /* !NO_LIBDWARF */
+
+	/* Synthesize probes without dwarf */
+	for (j = 0; j < session.nr_probe; j++) {
+		pp = &session.probes[j];
+		if (pp->found)	/* This probe is already found. */
+			continue;
+
+		ret = synthesize_trace_kprobe_event(pp);
+		if (ret == -E2BIG)
+			die("probe point definition becomes too long.");
+		else if (ret < 0)
+			die("Failed to synthesize a probe point.");
+	}
+
+	/* Settng up probe points */
+	add_trace_kprobe_events(session.probes, session.nr_probe);
+	return 0;
+}
+
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index a4be453..0e519c6 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -17,55 +17,52 @@
 #include "util/header.h"
 #include "util/event.h"
 #include "util/debug.h"
-#include "util/trace-event.h"
+#include "util/symbol.h"
 
 #include <unistd.h>
 #include <sched.h>
 
-#define ALIGN(x, a)		__ALIGN_MASK(x, (typeof(x))(a)-1)
-#define __ALIGN_MASK(x, mask)	(((x)+(mask))&~(mask))
-
 static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
 
-static long			default_interval		= 100000;
+static long			default_interval		=      0;
 
-static int			nr_cpus				= 0;
+static int			nr_cpus				=      0;
 static unsigned int		page_size;
-static unsigned int		mmap_pages			= 128;
-static int			freq				= 0;
+static unsigned int		mmap_pages			=    128;
+static int			freq				=   1000;
 static int			output;
 static const char		*output_name			= "perf.data";
-static int			group				= 0;
-static unsigned int		realtime_prio			= 0;
-static int			raw_samples			= 0;
-static int			system_wide			= 0;
-static int			profile_cpu			= -1;
-static pid_t			target_pid			= -1;
-static pid_t			child_pid			= -1;
-static int			inherit				= 1;
-static int			force				= 0;
-static int			append_file			= 0;
-static int			call_graph			= 0;
-static int			inherit_stat			= 0;
-static int			no_samples			= 0;
-static int			sample_address			= 0;
-static int			multiplex			= 0;
-static int			multiplex_fd			= -1;
+static int			group				=      0;
+static unsigned int		realtime_prio			=      0;
+static int			raw_samples			=      0;
+static int			system_wide			=      0;
+static int			profile_cpu			=     -1;
+static pid_t			target_pid			=     -1;
+static pid_t			child_pid			=     -1;
+static int			inherit				=      1;
+static int			force				=      0;
+static int			append_file			=      0;
+static int			call_graph			=      0;
+static int			inherit_stat			=      0;
+static int			no_samples			=      0;
+static int			sample_address			=      0;
+static int			multiplex			=      0;
+static int			multiplex_fd			=     -1;
 
-static long			samples;
+static long			samples				=      0;
 static struct timeval		last_read;
 static struct timeval		this_read;
 
-static u64			bytes_written;
+static u64			bytes_written			=      0;
 
 static struct pollfd		event_array[MAX_NR_CPUS * MAX_COUNTERS];
 
-static int			nr_poll;
-static int			nr_cpu;
+static int			nr_poll				=      0;
+static int			nr_cpu				=      0;
 
-static int			file_new = 1;
+static int			file_new			=      1;
 
-struct perf_header		*header;
+struct perf_header		*header				=   NULL;
 
 struct mmap_data {
 	int			counter;
@@ -113,6 +110,24 @@
 	}
 }
 
+static void write_event(event_t *buf, size_t size)
+{
+	/*
+	* Add it to the list of DSOs, so that when we finish this
+	 * record session we can pick the available build-ids.
+	 */
+	if (buf->header.type == PERF_RECORD_MMAP)
+		dsos__findnew(buf->mmap.filename);
+
+	write_output(buf, size);
+}
+
+static int process_synthesized_event(event_t *event)
+{
+	write_event(event, event->header.size);
+	return 0;
+}
+
 static void mmap_read(struct mmap_data *md)
 {
 	unsigned int head = mmap_read_head(md);
@@ -161,14 +176,14 @@
 		size = md->mask + 1 - (old & md->mask);
 		old += size;
 
-		write_output(buf, size);
+		write_event(buf, size);
 	}
 
 	buf = &data[old & md->mask];
 	size = head - old;
 	old += size;
 
-	write_output(buf, size);
+	write_event(buf, size);
 
 	md->prev = old;
 	mmap_write_tail(md, old);
@@ -195,168 +210,6 @@
 	kill(getpid(), signr);
 }
 
-static pid_t pid_synthesize_comm_event(pid_t pid, int full)
-{
-	struct comm_event comm_ev;
-	char filename[PATH_MAX];
-	char bf[BUFSIZ];
-	FILE *fp;
-	size_t size = 0;
-	DIR *tasks;
-	struct dirent dirent, *next;
-	pid_t tgid = 0;
-
-	snprintf(filename, sizeof(filename), "/proc/%d/status", pid);
-
-	fp = fopen(filename, "r");
-	if (fp == NULL) {
-		/*
-		 * We raced with a task exiting - just return:
-		 */
-		if (verbose)
-			fprintf(stderr, "couldn't open %s\n", filename);
-		return 0;
-	}
-
-	memset(&comm_ev, 0, sizeof(comm_ev));
-	while (!comm_ev.comm[0] || !comm_ev.pid) {
-		if (fgets(bf, sizeof(bf), fp) == NULL)
-			goto out_failure;
-
-		if (memcmp(bf, "Name:", 5) == 0) {
-			char *name = bf + 5;
-			while (*name && isspace(*name))
-				++name;
-			size = strlen(name) - 1;
-			memcpy(comm_ev.comm, name, size++);
-		} else if (memcmp(bf, "Tgid:", 5) == 0) {
-			char *tgids = bf + 5;
-			while (*tgids && isspace(*tgids))
-				++tgids;
-			tgid = comm_ev.pid = atoi(tgids);
-		}
-	}
-
-	comm_ev.header.type = PERF_RECORD_COMM;
-	size = ALIGN(size, sizeof(u64));
-	comm_ev.header.size = sizeof(comm_ev) - (sizeof(comm_ev.comm) - size);
-
-	if (!full) {
-		comm_ev.tid = pid;
-
-		write_output(&comm_ev, comm_ev.header.size);
-		goto out_fclose;
-	}
-
-	snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
-
-	tasks = opendir(filename);
-	while (!readdir_r(tasks, &dirent, &next) && next) {
-		char *end;
-		pid = strtol(dirent.d_name, &end, 10);
-		if (*end)
-			continue;
-
-		comm_ev.tid = pid;
-
-		write_output(&comm_ev, comm_ev.header.size);
-	}
-	closedir(tasks);
-
-out_fclose:
-	fclose(fp);
-	return tgid;
-
-out_failure:
-	fprintf(stderr, "couldn't get COMM and pgid, malformed %s\n",
-		filename);
-	exit(EXIT_FAILURE);
-}
-
-static void pid_synthesize_mmap_samples(pid_t pid, pid_t tgid)
-{
-	char filename[PATH_MAX];
-	FILE *fp;
-
-	snprintf(filename, sizeof(filename), "/proc/%d/maps", pid);
-
-	fp = fopen(filename, "r");
-	if (fp == NULL) {
-		/*
-		 * We raced with a task exiting - just return:
-		 */
-		if (verbose)
-			fprintf(stderr, "couldn't open %s\n", filename);
-		return;
-	}
-	while (1) {
-		char bf[BUFSIZ], *pbf = bf;
-		struct mmap_event mmap_ev = {
-			.header = { .type = PERF_RECORD_MMAP },
-		};
-		int n;
-		size_t size;
-		if (fgets(bf, sizeof(bf), fp) == NULL)
-			break;
-
-		/* 00400000-0040c000 r-xp 00000000 fd:01 41038  /bin/cat */
-		n = hex2u64(pbf, &mmap_ev.start);
-		if (n < 0)
-			continue;
-		pbf += n + 1;
-		n = hex2u64(pbf, &mmap_ev.len);
-		if (n < 0)
-			continue;
-		pbf += n + 3;
-		if (*pbf == 'x') { /* vm_exec */
-			char *execname = strchr(bf, '/');
-
-			/* Catch VDSO */
-			if (execname == NULL)
-				execname = strstr(bf, "[vdso]");
-
-			if (execname == NULL)
-				continue;
-
-			size = strlen(execname);
-			execname[size - 1] = '\0'; /* Remove \n */
-			memcpy(mmap_ev.filename, execname, size);
-			size = ALIGN(size, sizeof(u64));
-			mmap_ev.len -= mmap_ev.start;
-			mmap_ev.header.size = (sizeof(mmap_ev) -
-					       (sizeof(mmap_ev.filename) - size));
-			mmap_ev.pid = tgid;
-			mmap_ev.tid = pid;
-
-			write_output(&mmap_ev, mmap_ev.header.size);
-		}
-	}
-
-	fclose(fp);
-}
-
-static void synthesize_all(void)
-{
-	DIR *proc;
-	struct dirent dirent, *next;
-
-	proc = opendir("/proc");
-
-	while (!readdir_r(proc, &dirent, &next) && next) {
-		char *end;
-		pid_t pid, tgid;
-
-		pid = strtol(dirent.d_name, &end, 10);
-		if (*end) /* only interested in proper numerical dirents */
-			continue;
-
-		tgid = pid_synthesize_comm_event(pid, 1);
-		pid_synthesize_mmap_samples(pid, tgid);
-	}
-
-	closedir(proc);
-}
-
 static int group_fd;
 
 static struct perf_header_attr *get_header_attr(struct perf_event_attr *a, int nr)
@@ -367,7 +220,11 @@
 		h_attr = header->attr[nr];
 	} else {
 		h_attr = perf_header_attr__new(a);
-		perf_header__add_attr(header, h_attr);
+		if (h_attr != NULL)
+			if (perf_header__add_attr(header, h_attr) < 0) {
+				perf_header_attr__delete(h_attr);
+				h_attr = NULL;
+			}
 	}
 
 	return h_attr;
@@ -375,9 +232,11 @@
 
 static void create_counter(int counter, int cpu, pid_t pid)
 {
+	char *filter = filters[counter];
 	struct perf_event_attr *attr = attrs + counter;
 	struct perf_header_attr *h_attr;
 	int track = !counter; /* only the first counter needs these */
+	int ret;
 	struct {
 		u64 count;
 		u64 time_enabled;
@@ -448,11 +307,19 @@
 		printf("\n");
 		error("perfcounter syscall returned with %d (%s)\n",
 			fd[nr_cpu][counter], strerror(err));
+
+#if defined(__i386__) || defined(__x86_64__)
+		if (attr->type == PERF_TYPE_HARDWARE && err == EOPNOTSUPP)
+			die("No hardware sampling interrupt available. No APIC? If so then you can boot the kernel with the \"lapic\" boot parameter to force-enable it.\n");
+#endif
+
 		die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
 		exit(-1);
 	}
 
 	h_attr = get_header_attr(attr, counter);
+	if (h_attr == NULL)
+		die("nomem\n");
 
 	if (!file_new) {
 		if (memcmp(&h_attr->attr, attr, sizeof(*attr))) {
@@ -466,7 +333,10 @@
 		exit(-1);
 	}
 
-	perf_header_attr__add_id(h_attr, read_data.id);
+	if (perf_header_attr__add_id(h_attr, read_data.id) < 0) {
+		pr_warning("Not enough memory to add id\n");
+		exit(-1);
+	}
 
 	assert(fd[nr_cpu][counter] >= 0);
 	fcntl(fd[nr_cpu][counter], F_SETFL, O_NONBLOCK);
@@ -480,7 +350,6 @@
 		multiplex_fd = fd[nr_cpu][counter];
 
 	if (multiplex && fd[nr_cpu][counter] != multiplex_fd) {
-		int ret;
 
 		ret = ioctl(fd[nr_cpu][counter], PERF_EVENT_IOC_SET_OUTPUT, multiplex_fd);
 		assert(ret != -1);
@@ -500,6 +369,16 @@
 		}
 	}
 
+	if (filter != NULL) {
+		ret = ioctl(fd[nr_cpu][counter],
+			    PERF_EVENT_IOC_SET_FILTER, filter);
+		if (ret) {
+			error("failed to set filter with %d (%s)\n", errno,
+			      strerror(errno));
+			exit(-1);
+		}
+	}
+
 	ioctl(fd[nr_cpu][counter], PERF_EVENT_IOC_ENABLE);
 }
 
@@ -518,7 +397,7 @@
 {
 	header->data_size += bytes_written;
 
-	perf_header__write(header, output);
+	perf_header__write(header, output, true);
 }
 
 static int __cmd_record(int argc, const char **argv)
@@ -527,7 +406,7 @@
 	struct stat st;
 	pid_t pid = 0;
 	int flags;
-	int ret;
+	int err;
 	unsigned long waking = 0;
 
 	page_size = sysconf(_SC_PAGE_SIZE);
@@ -561,22 +440,29 @@
 		exit(-1);
 	}
 
-	if (!file_new)
-		header = perf_header__read(output);
-	else
-		header = perf_header__new();
+	header = perf_header__new();
+	if (header == NULL) {
+		pr_err("Not enough memory for reading perf file header\n");
+		return -1;
+	}
 
+	if (!file_new) {
+		err = perf_header__read(header, output);
+		if (err < 0)
+			return err;
+	}
 
 	if (raw_samples) {
-		read_tracing_data(attrs, nr_counters);
+		perf_header__set_feat(header, HEADER_TRACE_INFO);
 	} else {
 		for (i = 0; i < nr_counters; i++) {
 			if (attrs[i].sample_type & PERF_SAMPLE_RAW) {
-				read_tracing_data(attrs, nr_counters);
+				perf_header__set_feat(header, HEADER_TRACE_INFO);
 				break;
 			}
 		}
 	}
+
 	atexit(atexit_header);
 
 	if (!system_wide) {
@@ -594,25 +480,36 @@
 		}
 	}
 
-	if (file_new)
-		perf_header__write(header, output);
+	if (file_new) {
+		err = perf_header__write(header, output, false);
+		if (err < 0)
+			return err;
+	}
 
-	if (!system_wide) {
-		pid_t tgid = pid_synthesize_comm_event(pid, 0);
-		pid_synthesize_mmap_samples(pid, tgid);
-	} else
-		synthesize_all();
+	if (!system_wide)
+		event__synthesize_thread(pid, process_synthesized_event);
+	else
+		event__synthesize_threads(process_synthesized_event);
 
 	if (target_pid == -1 && argc) {
 		pid = fork();
 		if (pid < 0)
-			perror("failed to fork");
+			die("failed to fork");
 
 		if (!pid) {
 			if (execvp(argv[0], (char **)argv)) {
 				perror(argv[0]);
 				exit(-1);
 			}
+		} else {
+			/*
+			 * Wait a bit for the execv'ed child to appear
+			 * and be updated in /proc
+			 * FIXME: Do you know a less heuristical solution?
+			 */
+			usleep(1000);
+			event__synthesize_thread(pid,
+						 process_synthesized_event);
 		}
 
 		child_pid = pid;
@@ -623,7 +520,7 @@
 
 		param.sched_priority = realtime_prio;
 		if (sched_setscheduler(0, SCHED_FIFO, &param)) {
-			printf("Could not set realtime priority.\n");
+			pr_err("Could not set realtime priority.\n");
 			exit(-1);
 		}
 	}
@@ -641,7 +538,7 @@
 		if (hits == samples) {
 			if (done)
 				break;
-			ret = poll(event_array, nr_poll, -1);
+			err = poll(event_array, nr_poll, -1);
 			waking++;
 		}
 
@@ -677,6 +574,8 @@
 	OPT_CALLBACK('e', "event", NULL, "event",
 		     "event selector. use 'perf list' to list available events",
 		     parse_events),
+	OPT_CALLBACK(0, "filter", NULL, "filter",
+		     "event filter", parse_filter),
 	OPT_INTEGER('p', "pid", &target_pid,
 		    "record events on existing pid"),
 	OPT_INTEGER('r', "realtime", &realtime_prio,
@@ -720,6 +619,8 @@
 {
 	int counter;
 
+	symbol__init(0);
+
 	argc = parse_options(argc, argv, options, record_usage,
 		PARSE_OPT_STOP_AT_NON_OPTION);
 	if (!argc && target_pid == -1 && !system_wide)
@@ -731,6 +632,18 @@
 		attrs[0].config = PERF_COUNT_HW_CPU_CYCLES;
 	}
 
+	/*
+	 * User specified count overrides default frequency.
+	 */
+	if (default_interval)
+		freq = 0;
+	else if (freq) {
+		default_interval = freq;
+	} else {
+		fprintf(stderr, "frequency and count are zero, aborting\n");
+		exit(EXIT_FAILURE);
+	}
+
 	for (counter = 0; counter < nr_counters; counter++) {
 		if (attrs[counter].sample_period)
 			continue;
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 19669c2..383c4ab 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -26,20 +26,18 @@
 #include "util/parse-options.h"
 #include "util/parse-events.h"
 
+#include "util/data_map.h"
 #include "util/thread.h"
+#include "util/sort.h"
+#include "util/hist.h"
 
 static char		const *input_name = "perf.data";
 
-static char		default_sort_order[] = "comm,dso,symbol";
-static char		*sort_order = default_sort_order;
 static char		*dso_list_str, *comm_list_str, *sym_list_str,
 			*col_width_list_str;
 static struct strlist	*dso_list, *comm_list, *sym_list;
-static char		*field_sep;
 
 static int		force;
-static int		input;
-static int		show_mask = SHOW_KERNEL | SHOW_USER | SHOW_HV;
 
 static int		full_paths;
 static int		show_nr_samples;
@@ -50,374 +48,38 @@
 static char		default_pretty_printing_style[] = "normal";
 static char		*pretty_printing_style = default_pretty_printing_style;
 
-static unsigned long	page_size;
-static unsigned long	mmap_window = 32;
-
-static char		default_parent_pattern[] = "^sys_|^do_page_fault";
-static char		*parent_pattern = default_parent_pattern;
-static regex_t		parent_regex;
-
 static int		exclude_other = 1;
 
 static char		callchain_default_opt[] = "fractal,0.5";
 
-static int		callchain;
-
-static char		__cwd[PATH_MAX];
-static char		*cwd = __cwd;
-static int		cwdlen;
-
-static struct rb_root	threads;
-static struct thread	*last_match;
-
 static struct perf_header *header;
 
-static
-struct callchain_param	callchain_param = {
-	.mode	= CHAIN_GRAPH_REL,
-	.min_percent = 0.5
-};
-
 static u64		sample_type;
 
-static int repsep_fprintf(FILE *fp, const char *fmt, ...)
-{
-	int n;
-	va_list ap;
+struct symbol_conf	symbol_conf;
 
-	va_start(ap, fmt);
-	if (!field_sep)
-		n = vfprintf(fp, fmt, ap);
-	else {
-		char *bf = NULL;
-		n = vasprintf(&bf, fmt, ap);
-		if (n > 0) {
-			char *sep = bf;
-
-			while (1) {
-				sep = strchr(sep, *field_sep);
-				if (sep == NULL)
-					break;
-				*sep = '.';
-			}
-		}
-		fputs(bf, fp);
-		free(bf);
-	}
-	va_end(ap);
-	return n;
-}
-
-static unsigned int dsos__col_width,
-		    comms__col_width,
-		    threads__col_width;
-
-/*
- * histogram, sorted on item, collects counts
- */
-
-static struct rb_root hist;
-
-struct hist_entry {
-	struct rb_node		rb_node;
-
-	struct thread		*thread;
-	struct map		*map;
-	struct dso		*dso;
-	struct symbol		*sym;
-	struct symbol		*parent;
-	u64			ip;
-	char			level;
-	struct callchain_node	callchain;
-	struct rb_root		sorted_chain;
-
-	u64			count;
-};
-
-/*
- * configurable sorting bits
- */
-
-struct sort_entry {
-	struct list_head list;
-
-	const char *header;
-
-	int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
-	int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
-	size_t	(*print)(FILE *fp, struct hist_entry *, unsigned int width);
-	unsigned int *width;
-	bool	elide;
-};
-
-static int64_t cmp_null(void *l, void *r)
-{
-	if (!l && !r)
-		return 0;
-	else if (!l)
-		return -1;
-	else
-		return 1;
-}
-
-/* --sort pid */
-
-static int64_t
-sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	return right->thread->pid - left->thread->pid;
-}
 
 static size_t
-sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width)
+callchain__fprintf_left_margin(FILE *fp, int left_margin)
 {
-	return repsep_fprintf(fp, "%*s:%5d", width - 6,
-			      self->thread->comm ?: "", self->thread->pid);
-}
+	int i;
+	int ret;
 
-static struct sort_entry sort_thread = {
-	.header = "Command:  Pid",
-	.cmp	= sort__thread_cmp,
-	.print	= sort__thread_print,
-	.width	= &threads__col_width,
-};
+	ret = fprintf(fp, "            ");
 
-/* --sort comm */
-
-static int64_t
-sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	return right->thread->pid - left->thread->pid;
-}
-
-static int64_t
-sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
-{
-	char *comm_l = left->thread->comm;
-	char *comm_r = right->thread->comm;
-
-	if (!comm_l || !comm_r)
-		return cmp_null(comm_l, comm_r);
-
-	return strcmp(comm_l, comm_r);
-}
-
-static size_t
-sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width)
-{
-	return repsep_fprintf(fp, "%*s", width, self->thread->comm);
-}
-
-static struct sort_entry sort_comm = {
-	.header		= "Command",
-	.cmp		= sort__comm_cmp,
-	.collapse	= sort__comm_collapse,
-	.print		= sort__comm_print,
-	.width		= &comms__col_width,
-};
-
-/* --sort dso */
-
-static int64_t
-sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	struct dso *dso_l = left->dso;
-	struct dso *dso_r = right->dso;
-
-	if (!dso_l || !dso_r)
-		return cmp_null(dso_l, dso_r);
-
-	return strcmp(dso_l->name, dso_r->name);
-}
-
-static size_t
-sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width)
-{
-	if (self->dso)
-		return repsep_fprintf(fp, "%-*s", width, self->dso->name);
-
-	return repsep_fprintf(fp, "%*llx", width, (u64)self->ip);
-}
-
-static struct sort_entry sort_dso = {
-	.header = "Shared Object",
-	.cmp	= sort__dso_cmp,
-	.print	= sort__dso_print,
-	.width	= &dsos__col_width,
-};
-
-/* --sort symbol */
-
-static int64_t
-sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	u64 ip_l, ip_r;
-
-	if (left->sym == right->sym)
-		return 0;
-
-	ip_l = left->sym ? left->sym->start : left->ip;
-	ip_r = right->sym ? right->sym->start : right->ip;
-
-	return (int64_t)(ip_r - ip_l);
-}
-
-static size_t
-sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used)
-{
-	size_t ret = 0;
-
-	if (verbose)
-		ret += repsep_fprintf(fp, "%#018llx %c ", (u64)self->ip,
-				      dso__symtab_origin(self->dso));
-
-	ret += repsep_fprintf(fp, "[%c] ", self->level);
-	if (self->sym) {
-		ret += repsep_fprintf(fp, "%s", self->sym->name);
-
-		if (self->sym->module)
-			ret += repsep_fprintf(fp, "\t[%s]",
-					     self->sym->module->name);
-	} else {
-		ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip);
-	}
+	for (i = 0; i < left_margin; i++)
+		ret += fprintf(fp, " ");
 
 	return ret;
 }
 
-static struct sort_entry sort_sym = {
-	.header = "Symbol",
-	.cmp	= sort__sym_cmp,
-	.print	= sort__sym_print,
-};
-
-/* --sort parent */
-
-static int64_t
-sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	struct symbol *sym_l = left->parent;
-	struct symbol *sym_r = right->parent;
-
-	if (!sym_l || !sym_r)
-		return cmp_null(sym_l, sym_r);
-
-	return strcmp(sym_l->name, sym_r->name);
-}
-
-static size_t
-sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width)
-{
-	return repsep_fprintf(fp, "%-*s", width,
-			      self->parent ? self->parent->name : "[other]");
-}
-
-static unsigned int parent_symbol__col_width;
-
-static struct sort_entry sort_parent = {
-	.header = "Parent symbol",
-	.cmp	= sort__parent_cmp,
-	.print	= sort__parent_print,
-	.width	= &parent_symbol__col_width,
-};
-
-static int sort__need_collapse = 0;
-static int sort__has_parent = 0;
-
-struct sort_dimension {
-	const char		*name;
-	struct sort_entry	*entry;
-	int			taken;
-};
-
-static struct sort_dimension sort_dimensions[] = {
-	{ .name = "pid",	.entry = &sort_thread,	},
-	{ .name = "comm",	.entry = &sort_comm,	},
-	{ .name = "dso",	.entry = &sort_dso,	},
-	{ .name = "symbol",	.entry = &sort_sym,	},
-	{ .name = "parent",	.entry = &sort_parent,	},
-};
-
-static LIST_HEAD(hist_entry__sort_list);
-
-static int sort_dimension__add(const char *tok)
-{
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
-		struct sort_dimension *sd = &sort_dimensions[i];
-
-		if (sd->taken)
-			continue;
-
-		if (strncasecmp(tok, sd->name, strlen(tok)))
-			continue;
-
-		if (sd->entry->collapse)
-			sort__need_collapse = 1;
-
-		if (sd->entry == &sort_parent) {
-			int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED);
-			if (ret) {
-				char err[BUFSIZ];
-
-				regerror(ret, &parent_regex, err, sizeof(err));
-				fprintf(stderr, "Invalid regex: %s\n%s",
-					parent_pattern, err);
-				exit(-1);
-			}
-			sort__has_parent = 1;
-		}
-
-		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
-		sd->taken = 1;
-
-		return 0;
-	}
-
-	return -ESRCH;
-}
-
-static int64_t
-hist_entry__cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	struct sort_entry *se;
-	int64_t cmp = 0;
-
-	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		cmp = se->cmp(left, right);
-		if (cmp)
-			break;
-	}
-
-	return cmp;
-}
-
-static int64_t
-hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
-{
-	struct sort_entry *se;
-	int64_t cmp = 0;
-
-	list_for_each_entry(se, &hist_entry__sort_list, list) {
-		int64_t (*f)(struct hist_entry *, struct hist_entry *);
-
-		f = se->collapse ?: se->cmp;
-
-		cmp = f(left, right);
-		if (cmp)
-			break;
-	}
-
-	return cmp;
-}
-
-static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask)
+static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
+					  int left_margin)
 {
 	int i;
 	size_t ret = 0;
 
-	ret += fprintf(fp, "%s", "                ");
+	ret += callchain__fprintf_left_margin(fp, left_margin);
 
 	for (i = 0; i < depth; i++)
 		if (depth_mask & (1 << i))
@@ -432,12 +94,12 @@
 static size_t
 ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain, int depth,
 		       int depth_mask, int count, u64 total_samples,
-		       int hits)
+		       int hits, int left_margin)
 {
 	int i;
 	size_t ret = 0;
 
-	ret += fprintf(fp, "%s", "                ");
+	ret += callchain__fprintf_left_margin(fp, left_margin);
 	for (i = 0; i < depth; i++) {
 		if (depth_mask & (1 << i))
 			ret += fprintf(fp, "|");
@@ -475,8 +137,9 @@
 }
 
 static size_t
-callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
-			u64 total_samples, int depth, int depth_mask)
+__callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
+			   u64 total_samples, int depth, int depth_mask,
+			   int left_margin)
 {
 	struct rb_node *node, *next;
 	struct callchain_node *child;
@@ -517,7 +180,8 @@
 		 * But we keep the older depth mask for the line seperator
 		 * to keep the level link until we reach the last child
 		 */
-		ret += ipchain__fprintf_graph_line(fp, depth, depth_mask);
+		ret += ipchain__fprintf_graph_line(fp, depth, depth_mask,
+						   left_margin);
 		i = 0;
 		list_for_each_entry(chain, &child->val, list) {
 			if (chain->ip >= PERF_CONTEXT_MAX)
@@ -525,11 +189,13 @@
 			ret += ipchain__fprintf_graph(fp, chain, depth,
 						      new_depth_mask, i++,
 						      new_total,
-						      cumul);
+						      cumul,
+						      left_margin);
 		}
-		ret += callchain__fprintf_graph(fp, child, new_total,
-						depth + 1,
-						new_depth_mask | (1 << depth));
+		ret += __callchain__fprintf_graph(fp, child, new_total,
+						  depth + 1,
+						  new_depth_mask | (1 << depth),
+						  left_margin);
 		node = next;
 	}
 
@@ -543,12 +209,51 @@
 
 		ret += ipchain__fprintf_graph(fp, &rem_hits, depth,
 					      new_depth_mask, 0, new_total,
-					      remaining);
+					      remaining, left_margin);
 	}
 
 	return ret;
 }
 
+
+static size_t
+callchain__fprintf_graph(FILE *fp, struct callchain_node *self,
+			 u64 total_samples, int left_margin)
+{
+	struct callchain_list *chain;
+	bool printed = false;
+	int i = 0;
+	int ret = 0;
+
+	list_for_each_entry(chain, &self->val, list) {
+		if (chain->ip >= PERF_CONTEXT_MAX)
+			continue;
+
+		if (!i++ && sort__first_dimension == SORT_SYM)
+			continue;
+
+		if (!printed) {
+			ret += callchain__fprintf_left_margin(fp, left_margin);
+			ret += fprintf(fp, "|\n");
+			ret += callchain__fprintf_left_margin(fp, left_margin);
+			ret += fprintf(fp, "---");
+
+			left_margin += 3;
+			printed = true;
+		} else
+			ret += callchain__fprintf_left_margin(fp, left_margin);
+
+		if (chain->sym)
+			ret += fprintf(fp, " %s\n", chain->sym->name);
+		else
+			ret += fprintf(fp, " %p\n", (void *)(long)chain->ip);
+	}
+
+	ret += __callchain__fprintf_graph(fp, self, total_samples, 1, 1, left_margin);
+
+	return ret;
+}
+
 static size_t
 callchain__fprintf_flat(FILE *fp, struct callchain_node *self,
 			u64 total_samples)
@@ -577,7 +282,7 @@
 
 static size_t
 hist_entry_callchain__fprintf(FILE *fp, struct hist_entry *self,
-			      u64 total_samples)
+			      u64 total_samples, int left_margin)
 {
 	struct rb_node *rb_node;
 	struct callchain_node *chain;
@@ -597,8 +302,8 @@
 			break;
 		case CHAIN_GRAPH_ABS: /* Falldown */
 		case CHAIN_GRAPH_REL:
-			ret += callchain__fprintf_graph(fp, chain,
-							total_samples, 1, 1);
+			ret += callchain__fprintf_graph(fp, chain, total_samples,
+							left_margin);
 		case CHAIN_NONE:
 		default:
 			break;
@@ -610,7 +315,6 @@
 	return ret;
 }
 
-
 static size_t
 hist_entry__fprintf(FILE *fp, struct hist_entry *self, u64 total_samples)
 {
@@ -644,8 +348,19 @@
 
 	ret += fprintf(fp, "\n");
 
-	if (callchain)
-		hist_entry_callchain__fprintf(fp, self, total_samples);
+	if (callchain) {
+		int left_margin = 0;
+
+		if (sort__first_dimension == SORT_COMM) {
+			se = list_first_entry(&hist_entry__sort_list, typeof(*se),
+						list);
+			left_margin = se->width ? *se->width : 0;
+			left_margin -= thread__comm_len(self->thread);
+		}
+
+		hist_entry_callchain__fprintf(fp, self, total_samples,
+					      left_margin);
+	}
 
 	return ret;
 }
@@ -693,63 +408,6 @@
 	return 0;
 }
 
-
-static struct symbol *
-resolve_symbol(struct thread *thread, struct map **mapp,
-	       struct dso **dsop, u64 *ipp)
-{
-	struct dso *dso = dsop ? *dsop : NULL;
-	struct map *map = mapp ? *mapp : NULL;
-	u64 ip = *ipp;
-
-	if (!thread)
-		return NULL;
-
-	if (dso)
-		goto got_dso;
-
-	if (map)
-		goto got_map;
-
-	map = thread__find_map(thread, ip);
-	if (map != NULL) {
-		/*
-		 * We have to do this here as we may have a dso
-		 * with no symbol hit that has a name longer than
-		 * the ones with symbols sampled.
-		 */
-		if (!sort_dso.elide && !map->dso->slen_calculated)
-			dso__calc_col_width(map->dso);
-
-		if (mapp)
-			*mapp = map;
-got_map:
-		ip = map->map_ip(map, ip);
-
-		dso = map->dso;
-	} else {
-		/*
-		 * If this is outside of all known maps,
-		 * and is a negative address, try to look it
-		 * up in the kernel dso, as it might be a
-		 * vsyscall (which executes in user-mode):
-		 */
-		if ((long long)ip < 0)
-		dso = kernel_dso;
-	}
-	dump_printf(" ...... dso: %s\n", dso ? dso->name : "<not found>");
-	dump_printf(" ...... map: %Lx -> %Lx\n", *ipp, ip);
-	*ipp  = ip;
-
-	if (dsop)
-		*dsop = dso;
-
-	if (!dso)
-		return NULL;
-got_dso:
-	return dso->find_symbol(dso, ip);
-}
-
 static int call__match(struct symbol *sym)
 {
 	if (sym->name && !regexec(&parent_regex, sym->name, 0, NULL, 0))
@@ -758,11 +416,11 @@
 	return 0;
 }
 
-static struct symbol **
-resolve_callchain(struct thread *thread, struct map *map __used,
-		    struct ip_callchain *chain, struct hist_entry *entry)
+static struct symbol **resolve_callchain(struct thread *thread,
+					 struct ip_callchain *chain,
+					 struct symbol **parent)
 {
-	u64 context = PERF_CONTEXT_MAX;
+	u8 cpumode = PERF_RECORD_MISC_USER;
 	struct symbol **syms = NULL;
 	unsigned int i;
 
@@ -776,34 +434,31 @@
 
 	for (i = 0; i < chain->nr; i++) {
 		u64 ip = chain->ips[i];
-		struct dso *dso = NULL;
-		struct symbol *sym;
+		struct addr_location al;
 
 		if (ip >= PERF_CONTEXT_MAX) {
-			context = ip;
+			switch (ip) {
+			case PERF_CONTEXT_HV:
+				cpumode = PERF_RECORD_MISC_HYPERVISOR;	break;
+			case PERF_CONTEXT_KERNEL:
+				cpumode = PERF_RECORD_MISC_KERNEL;	break;
+			case PERF_CONTEXT_USER:
+				cpumode = PERF_RECORD_MISC_USER;	break;
+			default:
+				break;
+			}
 			continue;
 		}
 
-		switch (context) {
-		case PERF_CONTEXT_HV:
-			dso = hypervisor_dso;
-			break;
-		case PERF_CONTEXT_KERNEL:
-			dso = kernel_dso;
-			break;
-		default:
-			break;
-		}
-
-		sym = resolve_symbol(thread, NULL, &dso, &ip);
-
-		if (sym) {
-			if (sort__has_parent && call__match(sym) &&
-			    !entry->parent)
-				entry->parent = sym;
+		thread__find_addr_location(thread, cpumode, MAP__FUNCTION,
+					   ip, &al, NULL);
+		if (al.sym != NULL) {
+			if (sort__has_parent && !*parent &&
+			    call__match(al.sym))
+				*parent = al.sym;
 			if (!callchain)
 				break;
-			syms[i] = sym;
+			syms[i] = al.sym;
 		}
 	}
 
@@ -814,178 +469,33 @@
  * collect histogram counts
  */
 
-static int
-hist_entry__add(struct thread *thread, struct map *map, struct dso *dso,
-		struct symbol *sym, u64 ip, struct ip_callchain *chain,
-		char level, u64 count)
+static int hist_entry__add(struct addr_location *al,
+			   struct ip_callchain *chain, u64 count)
 {
-	struct rb_node **p = &hist.rb_node;
-	struct rb_node *parent = NULL;
+	struct symbol **syms = NULL, *parent = NULL;
+	bool hit;
 	struct hist_entry *he;
-	struct symbol **syms = NULL;
-	struct hist_entry entry = {
-		.thread	= thread,
-		.map	= map,
-		.dso	= dso,
-		.sym	= sym,
-		.ip	= ip,
-		.level	= level,
-		.count	= count,
-		.parent = NULL,
-		.sorted_chain = RB_ROOT
-	};
-	int cmp;
 
 	if ((sort__has_parent || callchain) && chain)
-		syms = resolve_callchain(thread, map, chain, &entry);
+		syms = resolve_callchain(al->thread, chain, &parent);
 
-	while (*p != NULL) {
-		parent = *p;
-		he = rb_entry(parent, struct hist_entry, rb_node);
-
-		cmp = hist_entry__cmp(&entry, he);
-
-		if (!cmp) {
-			he->count += count;
-			if (callchain) {
-				append_chain(&he->callchain, chain, syms);
-				free(syms);
-			}
-			return 0;
-		}
-
-		if (cmp < 0)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	he = malloc(sizeof(*he));
-	if (!he)
+	he = __hist_entry__add(al, parent, count, &hit);
+	if (he == NULL)
 		return -ENOMEM;
-	*he = entry;
+
+	if (hit)
+		he->count += count;
+
 	if (callchain) {
-		callchain_init(&he->callchain);
+		if (!hit)
+			callchain_init(&he->callchain);
 		append_chain(&he->callchain, chain, syms);
 		free(syms);
 	}
-	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &hist);
 
 	return 0;
 }
 
-static void hist_entry__free(struct hist_entry *he)
-{
-	free(he);
-}
-
-/*
- * collapse the histogram
- */
-
-static struct rb_root collapse_hists;
-
-static void collapse__insert_entry(struct hist_entry *he)
-{
-	struct rb_node **p = &collapse_hists.rb_node;
-	struct rb_node *parent = NULL;
-	struct hist_entry *iter;
-	int64_t cmp;
-
-	while (*p != NULL) {
-		parent = *p;
-		iter = rb_entry(parent, struct hist_entry, rb_node);
-
-		cmp = hist_entry__collapse(iter, he);
-
-		if (!cmp) {
-			iter->count += he->count;
-			hist_entry__free(he);
-			return;
-		}
-
-		if (cmp < 0)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &collapse_hists);
-}
-
-static void collapse__resort(void)
-{
-	struct rb_node *next;
-	struct hist_entry *n;
-
-	if (!sort__need_collapse)
-		return;
-
-	next = rb_first(&hist);
-	while (next) {
-		n = rb_entry(next, struct hist_entry, rb_node);
-		next = rb_next(&n->rb_node);
-
-		rb_erase(&n->rb_node, &hist);
-		collapse__insert_entry(n);
-	}
-}
-
-/*
- * reverse the map, sort on count.
- */
-
-static struct rb_root output_hists;
-
-static void output__insert_entry(struct hist_entry *he, u64 min_callchain_hits)
-{
-	struct rb_node **p = &output_hists.rb_node;
-	struct rb_node *parent = NULL;
-	struct hist_entry *iter;
-
-	if (callchain)
-		callchain_param.sort(&he->sorted_chain, &he->callchain,
-				      min_callchain_hits, &callchain_param);
-
-	while (*p != NULL) {
-		parent = *p;
-		iter = rb_entry(parent, struct hist_entry, rb_node);
-
-		if (he->count > iter->count)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-
-	rb_link_node(&he->rb_node, parent, p);
-	rb_insert_color(&he->rb_node, &output_hists);
-}
-
-static void output__resort(u64 total_samples)
-{
-	struct rb_node *next;
-	struct hist_entry *n;
-	struct rb_root *tree = &hist;
-	u64 min_callchain_hits;
-
-	min_callchain_hits = total_samples * (callchain_param.min_percent / 100);
-
-	if (sort__need_collapse)
-		tree = &collapse_hists;
-
-	next = rb_first(tree);
-
-	while (next) {
-		n = rb_entry(next, struct hist_entry, rb_node);
-		next = rb_next(&n->rb_node);
-
-		rb_erase(&n->rb_node, tree);
-		output__insert_entry(n, min_callchain_hits);
-	}
-}
-
 static size_t output__fprintf(FILE *fp, u64 total_samples)
 {
 	struct hist_entry *pos;
@@ -1080,13 +590,6 @@
 	return ret;
 }
 
-static unsigned long total = 0,
-		     total_mmap = 0,
-		     total_comm = 0,
-		     total_fork = 0,
-		     total_unknown = 0,
-		     total_lost = 0;
-
 static int validate_chain(struct ip_callchain *chain, event_t *event)
 {
 	unsigned int chain_size;
@@ -1100,30 +603,22 @@
 	return 0;
 }
 
-static int
-process_sample_event(event_t *event, unsigned long offset, unsigned long head)
+static int process_sample_event(event_t *event)
 {
-	char level;
-	int show = 0;
-	struct dso *dso = NULL;
-	struct thread *thread;
 	u64 ip = event->ip.ip;
 	u64 period = 1;
-	struct map *map = NULL;
 	void *more_data = event->ip.__more_data;
 	struct ip_callchain *chain = NULL;
 	int cpumode;
-
-	thread = threads__findnew(event->ip.pid, &threads, &last_match);
+	struct addr_location al;
+	struct thread *thread = threads__findnew(event->ip.pid);
 
 	if (sample_type & PERF_SAMPLE_PERIOD) {
 		period = *(u64 *)more_data;
 		more_data += sizeof(u64);
 	}
 
-	dump_printf("%p [%p]: PERF_RECORD_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
+	dump_printf("(IP, %d): %d/%d: %p period: %Ld\n",
 		event->header.misc,
 		event->ip.pid, event->ip.tid,
 		(void *)(long)ip,
@@ -1137,7 +632,8 @@
 		dump_printf("... chain: nr:%Lu\n", chain->nr);
 
 		if (validate_chain(chain, event) < 0) {
-			eprintf("call-chain problem with event, skipping it.\n");
+			pr_debug("call-chain problem with event, "
+				 "skipping it.\n");
 			return 0;
 		}
 
@@ -1147,163 +643,64 @@
 		}
 	}
 
-	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
-
 	if (thread == NULL) {
-		eprintf("problem processing %d event, skipping it.\n",
+		pr_debug("problem processing %d event, skipping it.\n",
 			event->header.type);
 		return -1;
 	}
 
+	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
 	if (comm_list && !strlist__has_entry(comm_list, thread->comm))
 		return 0;
 
 	cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 
-	if (cpumode == PERF_RECORD_MISC_KERNEL) {
-		show = SHOW_KERNEL;
-		level = 'k';
+	thread__find_addr_location(thread, cpumode,
+				   MAP__FUNCTION, ip, &al, NULL);
+	/*
+	 * We have to do this here as we may have a dso with no symbol hit that
+	 * has a name longer than the ones with symbols sampled.
+	 */
+	if (al.map && !sort_dso.elide && !al.map->dso->slen_calculated)
+		dso__calc_col_width(al.map->dso);
 
-		dso = kernel_dso;
-
-		dump_printf(" ...... dso: %s\n", dso->name);
-
-	} else if (cpumode == PERF_RECORD_MISC_USER) {
-
-		show = SHOW_USER;
-		level = '.';
-
-	} else {
-		show = SHOW_HV;
-		level = 'H';
-
-		dso = hypervisor_dso;
-
-		dump_printf(" ...... dso: [hypervisor]\n");
-	}
-
-	if (show & show_mask) {
-		struct symbol *sym = resolve_symbol(thread, &map, &dso, &ip);
-
-		if (dso_list && (!dso || !dso->name ||
-				 !strlist__has_entry(dso_list, dso->name)))
-			return 0;
-
-		if (sym_list && (!sym || !strlist__has_entry(sym_list, sym->name)))
-			return 0;
-
-		if (hist_entry__add(thread, map, dso, sym, ip, chain, level, period)) {
-			eprintf("problem incrementing symbol count, skipping event\n");
-			return -1;
-		}
-	}
-	total += period;
-
-	return 0;
-}
-
-static int
-process_mmap_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	struct thread *thread;
-	struct map *map = map__new(&event->mmap, cwd, cwdlen);
-
-	thread = threads__findnew(event->mmap.pid, &threads, &last_match);
-
-	dump_printf("%p [%p]: PERF_RECORD_MMAP %d/%d: [%p(%p) @ %p]: %s\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->mmap.pid,
-		event->mmap.tid,
-		(void *)(long)event->mmap.start,
-		(void *)(long)event->mmap.len,
-		(void *)(long)event->mmap.pgoff,
-		event->mmap.filename);
-
-	if (thread == NULL || map == NULL) {
-		dump_printf("problem processing PERF_RECORD_MMAP, skipping event.\n");
+	if (dso_list &&
+	    (!al.map || !al.map->dso ||
+	     !(strlist__has_entry(dso_list, al.map->dso->short_name) ||
+	       (al.map->dso->short_name != al.map->dso->long_name &&
+		strlist__has_entry(dso_list, al.map->dso->long_name)))))
 		return 0;
+
+	if (sym_list && al.sym && !strlist__has_entry(sym_list, al.sym->name))
+		return 0;
+
+	if (hist_entry__add(&al, chain, period)) {
+		pr_debug("problem incrementing symbol count, skipping event\n");
+		return -1;
 	}
 
-	thread__insert_map(thread, map);
-	total_mmap++;
+	event__stats.total += period;
 
 	return 0;
 }
 
-static int
-process_comm_event(event_t *event, unsigned long offset, unsigned long head)
+static int process_comm_event(event_t *event)
 {
-	struct thread *thread;
+	struct thread *thread = threads__findnew(event->comm.pid);
 
-	thread = threads__findnew(event->comm.pid, &threads, &last_match);
-
-	dump_printf("%p [%p]: PERF_RECORD_COMM: %s:%d\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->comm.comm, event->comm.pid);
+	dump_printf(": %s:%d\n", event->comm.comm, event->comm.pid);
 
 	if (thread == NULL ||
 	    thread__set_comm_adjust(thread, event->comm.comm)) {
 		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
 		return -1;
 	}
-	total_comm++;
 
 	return 0;
 }
 
-static int
-process_task_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	struct thread *thread;
-	struct thread *parent;
-
-	thread = threads__findnew(event->fork.pid, &threads, &last_match);
-	parent = threads__findnew(event->fork.ppid, &threads, &last_match);
-
-	dump_printf("%p [%p]: PERF_RECORD_%s: (%d:%d):(%d:%d)\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->header.type == PERF_RECORD_FORK ? "FORK" : "EXIT",
-		event->fork.pid, event->fork.tid,
-		event->fork.ppid, event->fork.ptid);
-
-	/*
-	 * A thread clone will have the same PID for both
-	 * parent and child.
-	 */
-	if (thread == parent)
-		return 0;
-
-	if (event->header.type == PERF_RECORD_EXIT)
-		return 0;
-
-	if (!thread || !parent || thread__fork(thread, parent)) {
-		dump_printf("problem processing PERF_RECORD_FORK, skipping event.\n");
-		return -1;
-	}
-	total_fork++;
-
-	return 0;
-}
-
-static int
-process_lost_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	dump_printf("%p [%p]: PERF_RECORD_LOST: id:%Ld: lost:%Ld\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->lost.id,
-		event->lost.lost);
-
-	total_lost += event->lost.lost;
-
-	return 0;
-}
-
-static int
-process_read_event(event_t *event, unsigned long offset, unsigned long head)
+static int process_read_event(event_t *event)
 {
 	struct perf_event_attr *attr;
 
@@ -1319,238 +716,91 @@
 					   event->read.value);
 	}
 
-	dump_printf("%p [%p]: PERF_RECORD_READ: %d %d %s %Lu\n",
-			(void *)(offset + head),
-			(void *)(long)(event->header.size),
-			event->read.pid,
-			event->read.tid,
-			attr ? __event_name(attr->type, attr->config)
-			     : "FAIL",
-			event->read.value);
+	dump_printf(": %d %d %s %Lu\n", event->read.pid, event->read.tid,
+		    attr ? __event_name(attr->type, attr->config) : "FAIL",
+		    event->read.value);
 
 	return 0;
 }
 
-static int
-process_event(event_t *event, unsigned long offset, unsigned long head)
+static int sample_type_check(u64 type)
 {
-	trace_event(event);
-
-	switch (event->header.type) {
-	case PERF_RECORD_SAMPLE:
-		return process_sample_event(event, offset, head);
-
-	case PERF_RECORD_MMAP:
-		return process_mmap_event(event, offset, head);
-
-	case PERF_RECORD_COMM:
-		return process_comm_event(event, offset, head);
-
-	case PERF_RECORD_FORK:
-	case PERF_RECORD_EXIT:
-		return process_task_event(event, offset, head);
-
-	case PERF_RECORD_LOST:
-		return process_lost_event(event, offset, head);
-
-	case PERF_RECORD_READ:
-		return process_read_event(event, offset, head);
-
-	/*
-	 * We dont process them right now but they are fine:
-	 */
-
-	case PERF_RECORD_THROTTLE:
-	case PERF_RECORD_UNTHROTTLE:
-		return 0;
-
-	default:
-		return -1;
-	}
-
-	return 0;
-}
-
-static int __cmd_report(void)
-{
-	int ret, rc = EXIT_FAILURE;
-	unsigned long offset = 0;
-	unsigned long head, shift;
-	struct stat input_stat;
-	struct thread *idle;
-	event_t *event;
-	uint32_t size;
-	char *buf;
-
-	idle = register_idle_thread(&threads, &last_match);
-	thread__comm_adjust(idle);
-
-	if (show_threads)
-		perf_read_values_init(&show_threads_values);
-
-	input = open(input_name, O_RDONLY);
-	if (input < 0) {
-		fprintf(stderr, " failed to open file: %s", input_name);
-		if (!strcmp(input_name, "perf.data"))
-			fprintf(stderr, "  (try 'perf record' first)");
-		fprintf(stderr, "\n");
-		exit(-1);
-	}
-
-	ret = fstat(input, &input_stat);
-	if (ret < 0) {
-		perror("failed to stat file");
-		exit(-1);
-	}
-
-	if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
-		fprintf(stderr, "file: %s not owned by current user or root\n", input_name);
-		exit(-1);
-	}
-
-	if (!input_stat.st_size) {
-		fprintf(stderr, "zero-sized file, nothing to do!\n");
-		exit(0);
-	}
-
-	header = perf_header__read(input);
-	head = header->data_offset;
-
-	sample_type = perf_header__sample_type(header);
+	sample_type = type;
 
 	if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) {
 		if (sort__has_parent) {
 			fprintf(stderr, "selected --sort parent, but no"
 					" callchain data. Did you call"
 					" perf record without -g?\n");
-			exit(-1);
+			return -1;
 		}
 		if (callchain) {
 			fprintf(stderr, "selected -g but no callchain data."
 					" Did you call perf record without"
 					" -g?\n");
-			exit(-1);
+			return -1;
 		}
 	} else if (callchain_param.mode != CHAIN_NONE && !callchain) {
 			callchain = 1;
 			if (register_callchain_param(&callchain_param) < 0) {
 				fprintf(stderr, "Can't register callchain"
 						" params\n");
-				exit(-1);
+				return -1;
 			}
 	}
 
-	if (load_kernel() < 0) {
-		perror("failed to load kernel symbols");
-		return EXIT_FAILURE;
-	}
+	return 0;
+}
 
-	if (!full_paths) {
-		if (getcwd(__cwd, sizeof(__cwd)) == NULL) {
-			perror("failed to get the current directory");
-			return EXIT_FAILURE;
-		}
-		cwdlen = strlen(cwd);
-	} else {
-		cwd = NULL;
-		cwdlen = 0;
-	}
+static struct perf_file_handler file_handler = {
+	.process_sample_event	= process_sample_event,
+	.process_mmap_event	= event__process_mmap,
+	.process_comm_event	= process_comm_event,
+	.process_exit_event	= event__process_task,
+	.process_fork_event	= event__process_task,
+	.process_lost_event	= event__process_lost,
+	.process_read_event	= process_read_event,
+	.sample_type_check	= sample_type_check,
+};
 
-	shift = page_size * (head / page_size);
-	offset += shift;
-	head -= shift;
 
-remap:
-	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
-			   MAP_SHARED, input, offset);
-	if (buf == MAP_FAILED) {
-		perror("failed to mmap file");
-		exit(-1);
-	}
+static int __cmd_report(void)
+{
+	struct thread *idle;
+	int ret;
 
-more:
-	event = (event_t *)(buf + head);
+	idle = register_idle_thread();
+	thread__comm_adjust(idle);
 
-	size = event->header.size;
-	if (!size)
-		size = 8;
+	if (show_threads)
+		perf_read_values_init(&show_threads_values);
 
-	if (head + event->header.size >= page_size * mmap_window) {
-		int munmap_ret;
+	register_perf_file_handler(&file_handler);
 
-		shift = page_size * (head / page_size);
+	ret = mmap_dispatch_perf_file(&header, input_name, force,
+				      full_paths, &event__cwdlen, &event__cwd);
+	if (ret)
+		return ret;
 
-		munmap_ret = munmap(buf, page_size * mmap_window);
-		assert(munmap_ret == 0);
-
-		offset += shift;
-		head -= shift;
-		goto remap;
-	}
-
-	size = event->header.size;
-
-	dump_printf("\n%p [%p]: event: %d\n",
-			(void *)(offset + head),
-			(void *)(long)event->header.size,
-			event->header.type);
-
-	if (!size || process_event(event, offset, head) < 0) {
-
-		dump_printf("%p [%p]: skipping unknown header type: %d\n",
-			(void *)(offset + head),
-			(void *)(long)(event->header.size),
-			event->header.type);
-
-		total_unknown++;
-
-		/*
-		 * assume we lost track of the stream, check alignment, and
-		 * increment a single u64 in the hope to catch on again 'soon'.
-		 */
-
-		if (unlikely(head & 7))
-			head &= ~7ULL;
-
-		size = 8;
-	}
-
-	head += size;
-
-	if (offset + head >= header->data_offset + header->data_size)
-		goto done;
-
-	if (offset + head < (unsigned long)input_stat.st_size)
-		goto more;
-
-done:
-	rc = EXIT_SUCCESS;
-	close(input);
-
-	dump_printf("      IP events: %10ld\n", total);
-	dump_printf("    mmap events: %10ld\n", total_mmap);
-	dump_printf("    comm events: %10ld\n", total_comm);
-	dump_printf("    fork events: %10ld\n", total_fork);
-	dump_printf("    lost events: %10ld\n", total_lost);
-	dump_printf(" unknown events: %10ld\n", total_unknown);
-
-	if (dump_trace)
+	if (dump_trace) {
+		event__print_totals();
 		return 0;
+	}
 
-	if (verbose >= 3)
-		threads__fprintf(stdout, &threads);
+	if (verbose > 3)
+		threads__fprintf(stdout);
 
-	if (verbose >= 2)
+	if (verbose > 2)
 		dsos__fprintf(stdout);
 
 	collapse__resort();
-	output__resort(total);
-	output__fprintf(stdout, total);
+	output__resort(event__stats.total);
+	output__fprintf(stdout, event__stats.total);
 
 	if (show_threads)
 		perf_read_values_destroy(&show_threads_values);
 
-	return rc;
+	return ret;
 }
 
 static int
@@ -1606,7 +856,8 @@
 	return 0;
 }
 
-static const char * const report_usage[] = {
+//static const char * const report_usage[] = {
+const char * const report_usage[] = {
 	"perf report [<options>] <command>",
 	NULL
 };
@@ -1618,9 +869,10 @@
 		    "be more verbose (show symbol address, etc)"),
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
-	OPT_STRING('k', "vmlinux", &vmlinux_name, "file", "vmlinux pathname"),
+	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
+		   "file", "vmlinux pathname"),
 	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
-	OPT_BOOLEAN('m', "modules", &modules,
+	OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
 		    "load module symbols - WARNING: use only with -k and LIVE kernel"),
 	OPT_BOOLEAN('n', "show-nr-samples", &show_nr_samples,
 		    "Show a column with the number of samples"),
@@ -1690,9 +942,8 @@
 
 int cmd_report(int argc, const char **argv, const char *prefix __used)
 {
-	symbol__init();
-
-	page_size = getpagesize();
+	if (symbol__init(&symbol_conf) < 0)
+		return -1;
 
 	argc = parse_options(argc, argv, options, report_usage, 0);
 
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index ce2d5be..26b782f 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -11,6 +11,7 @@
 #include "util/trace-event.h"
 
 #include "util/debug.h"
+#include "util/data_map.h"
 
 #include <sys/types.h>
 #include <sys/prctl.h>
@@ -20,14 +21,6 @@
 #include <math.h>
 
 static char			const *input_name = "perf.data";
-static int			input;
-static unsigned long		page_size;
-static unsigned long		mmap_window = 32;
-
-static unsigned long		total_comm = 0;
-
-static struct rb_root		threads;
-static struct thread		*last_match;
 
 static struct perf_header	*header;
 static u64			sample_type;
@@ -35,11 +28,11 @@
 static char			default_sort_order[] = "avg, max, switch, runtime";
 static char			*sort_order = default_sort_order;
 
+static int			profile_cpu = -1;
+
 #define PR_SET_NAME		15               /* Set process name */
 #define MAX_CPUS		4096
 
-#define BUG_ON(x)		assert(!(x))
-
 static u64			run_measurement_overhead;
 static u64			sleep_measurement_overhead;
 
@@ -74,6 +67,7 @@
 	SCHED_EVENT_RUN,
 	SCHED_EVENT_SLEEP,
 	SCHED_EVENT_WAKEUP,
+	SCHED_EVENT_MIGRATION,
 };
 
 struct sched_atom {
@@ -226,7 +220,7 @@
 static struct sched_atom *
 get_new_event(struct task_desc *task, u64 timestamp)
 {
-	struct sched_atom *event = calloc(1, sizeof(*event));
+	struct sched_atom *event = zalloc(sizeof(*event));
 	unsigned long idx = task->nr_events;
 	size_t size;
 
@@ -294,7 +288,7 @@
 		return;
 	}
 
-	wakee_event->wait_sem = calloc(1, sizeof(*wakee_event->wait_sem));
+	wakee_event->wait_sem = zalloc(sizeof(*wakee_event->wait_sem));
 	sem_init(wakee_event->wait_sem, 0, 0);
 	wakee_event->specific_wait = 1;
 	event->wait_sem = wakee_event->wait_sem;
@@ -324,7 +318,7 @@
 	if (task)
 		return task;
 
-	task = calloc(1, sizeof(*task));
+	task = zalloc(sizeof(*task));
 	task->pid = pid;
 	task->nr = nr_tasks;
 	strcpy(task->comm, comm);
@@ -398,6 +392,8 @@
 				ret = sem_post(atom->wait_sem);
 			BUG_ON(ret);
 			break;
+		case SCHED_EVENT_MIGRATION:
+			break;
 		default:
 			BUG_ON(1);
 	}
@@ -632,29 +628,6 @@
 	printf("the sleep test took %Ld nsecs\n", T1-T0);
 }
 
-static int
-process_comm_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	struct thread *thread;
-
-	thread = threads__findnew(event->comm.pid, &threads, &last_match);
-
-	dump_printf("%p [%p]: perf_event_comm: %s:%d\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->comm.comm, event->comm.pid);
-
-	if (thread == NULL ||
-	    thread__set_comm(thread, event->comm.comm)) {
-		dump_printf("problem processing perf_event_comm, skipping event.\n");
-		return -1;
-	}
-	total_comm++;
-
-	return 0;
-}
-
-
 struct raw_event_sample {
 	u32 size;
 	char data[0];
@@ -745,6 +718,22 @@
 	u32 child_pid;
 };
 
+struct trace_migrate_task_event {
+	u32 size;
+
+	u16 common_type;
+	u8 common_flags;
+	u8 common_preempt_count;
+	u32 common_pid;
+	u32 common_tgid;
+
+	char comm[16];
+	u32 pid;
+
+	u32 prio;
+	u32 cpu;
+};
+
 struct trace_sched_handler {
 	void (*switch_event)(struct trace_switch_event *,
 			     struct event *,
@@ -769,6 +758,12 @@
 			   int cpu,
 			   u64 timestamp,
 			   struct thread *thread);
+
+	void (*migrate_task_event)(struct trace_migrate_task_event *,
+			   struct event *,
+			   int cpu,
+			   u64 timestamp,
+			   struct thread *thread);
 };
 
 
@@ -941,9 +936,7 @@
 
 static void thread_atoms_insert(struct thread *thread)
 {
-	struct work_atoms *atoms;
-
-	atoms = calloc(sizeof(*atoms), 1);
+	struct work_atoms *atoms = zalloc(sizeof(*atoms));
 	if (!atoms)
 		die("No memory");
 
@@ -975,9 +968,7 @@
 		    char run_state,
 		    u64 timestamp)
 {
-	struct work_atom *atom;
-
-	atom = calloc(sizeof(*atom), 1);
+	struct work_atom *atom = zalloc(sizeof(*atom));
 	if (!atom)
 		die("Non memory");
 
@@ -1058,8 +1049,8 @@
 		die("hm, delta: %Ld < 0 ?\n", delta);
 
 
-	sched_out = threads__findnew(switch_event->prev_pid, &threads, &last_match);
-	sched_in = threads__findnew(switch_event->next_pid, &threads, &last_match);
+	sched_out = threads__findnew(switch_event->prev_pid);
+	sched_in = threads__findnew(switch_event->next_pid);
 
 	out_events = thread_atoms_search(&atom_root, sched_out, &cmp_pid);
 	if (!out_events) {
@@ -1092,13 +1083,10 @@
 		     u64 timestamp,
 		     struct thread *this_thread __used)
 {
-	struct work_atoms *atoms;
-	struct thread *thread;
+	struct thread *thread = threads__findnew(runtime_event->pid);
+	struct work_atoms *atoms = thread_atoms_search(&atom_root, thread, &cmp_pid);
 
 	BUG_ON(cpu >= MAX_CPUS || cpu < 0);
-
-	thread = threads__findnew(runtime_event->pid, &threads, &last_match);
-	atoms = thread_atoms_search(&atom_root, thread, &cmp_pid);
 	if (!atoms) {
 		thread_atoms_insert(thread);
 		atoms = thread_atoms_search(&atom_root, thread, &cmp_pid);
@@ -1125,7 +1113,7 @@
 	if (!wakeup_event->success)
 		return;
 
-	wakee = threads__findnew(wakeup_event->pid, &threads, &last_match);
+	wakee = threads__findnew(wakeup_event->pid);
 	atoms = thread_atoms_search(&atom_root, wakee, &cmp_pid);
 	if (!atoms) {
 		thread_atoms_insert(wakee);
@@ -1139,7 +1127,12 @@
 
 	atom = list_entry(atoms->work_list.prev, struct work_atom, list);
 
-	if (atom->state != THREAD_SLEEPING)
+	/*
+	 * You WILL be missing events if you've recorded only
+	 * one CPU, or are only looking at only one, so don't
+	 * make useless noise.
+	 */
+	if (profile_cpu == -1 && atom->state != THREAD_SLEEPING)
 		nr_state_machine_bugs++;
 
 	nr_timestamps++;
@@ -1152,11 +1145,51 @@
 	atom->wake_up_time = timestamp;
 }
 
+static void
+latency_migrate_task_event(struct trace_migrate_task_event *migrate_task_event,
+		     struct event *__event __used,
+		     int cpu __used,
+		     u64 timestamp,
+		     struct thread *thread __used)
+{
+	struct work_atoms *atoms;
+	struct work_atom *atom;
+	struct thread *migrant;
+
+	/*
+	 * Only need to worry about migration when profiling one CPU.
+	 */
+	if (profile_cpu == -1)
+		return;
+
+	migrant = threads__findnew(migrate_task_event->pid);
+	atoms = thread_atoms_search(&atom_root, migrant, &cmp_pid);
+	if (!atoms) {
+		thread_atoms_insert(migrant);
+		register_pid(migrant->pid, migrant->comm);
+		atoms = thread_atoms_search(&atom_root, migrant, &cmp_pid);
+		if (!atoms)
+			die("migration-event: Internal tree error");
+		add_sched_out_event(atoms, 'R', timestamp);
+	}
+
+	BUG_ON(list_empty(&atoms->work_list));
+
+	atom = list_entry(atoms->work_list.prev, struct work_atom, list);
+	atom->sched_in_time = atom->sched_out_time = atom->wake_up_time = timestamp;
+
+	nr_timestamps++;
+
+	if (atom->sched_out_time > timestamp)
+		nr_unordered_timestamps++;
+}
+
 static struct trace_sched_handler lat_ops  = {
 	.wakeup_event		= latency_wakeup_event,
 	.switch_event		= latency_switch_event,
 	.runtime_event		= latency_runtime_event,
 	.fork_event		= latency_fork_event,
+	.migrate_task_event	= latency_migrate_task_event,
 };
 
 static void output_lat_thread(struct work_atoms *work_list)
@@ -1385,8 +1418,8 @@
 		die("hm, delta: %Ld < 0 ?\n", delta);
 
 
-	sched_out = threads__findnew(switch_event->prev_pid, &threads, &last_match);
-	sched_in = threads__findnew(switch_event->next_pid, &threads, &last_match);
+	sched_out = threads__findnew(switch_event->prev_pid);
+	sched_in = threads__findnew(switch_event->next_pid);
 
 	curr_thread[this_cpu] = sched_in;
 
@@ -1517,6 +1550,26 @@
 }
 
 static void
+process_sched_migrate_task_event(struct raw_event_sample *raw,
+			   struct event *event,
+			   int cpu __used,
+			   u64 timestamp __used,
+			   struct thread *thread __used)
+{
+	struct trace_migrate_task_event migrate_task_event;
+
+	FILL_COMMON_FIELDS(migrate_task_event, event, raw->data);
+
+	FILL_ARRAY(migrate_task_event, comm, event, raw->data);
+	FILL_FIELD(migrate_task_event, pid, event, raw->data);
+	FILL_FIELD(migrate_task_event, prio, event, raw->data);
+	FILL_FIELD(migrate_task_event, cpu, event, raw->data);
+
+	if (trace_handler->migrate_task_event)
+		trace_handler->migrate_task_event(&migrate_task_event, event, cpu, timestamp, thread);
+}
+
+static void
 process_raw_event(event_t *raw_event __used, void *more_data,
 		  int cpu, u64 timestamp, struct thread *thread)
 {
@@ -1539,23 +1592,23 @@
 		process_sched_fork_event(raw, event, cpu, timestamp, thread);
 	if (!strcmp(event->name, "sched_process_exit"))
 		process_sched_exit_event(event, cpu, timestamp, thread);
+	if (!strcmp(event->name, "sched_migrate_task"))
+		process_sched_migrate_task_event(raw, event, cpu, timestamp, thread);
 }
 
-static int
-process_sample_event(event_t *event, unsigned long offset, unsigned long head)
+static int process_sample_event(event_t *event)
 {
-	char level;
-	int show = 0;
-	struct dso *dso = NULL;
 	struct thread *thread;
 	u64 ip = event->ip.ip;
 	u64 timestamp = -1;
 	u32 cpu = -1;
 	u64 period = 1;
 	void *more_data = event->ip.__more_data;
-	int cpumode;
 
-	thread = threads__findnew(event->ip.pid, &threads, &last_match);
+	if (!(sample_type & PERF_SAMPLE_RAW))
+		return 0;
+
+	thread = threads__findnew(event->ip.pid);
 
 	if (sample_type & PERF_SAMPLE_TIME) {
 		timestamp = *(u64 *)more_data;
@@ -1573,177 +1626,64 @@
 		more_data += sizeof(u64);
 	}
 
-	dump_printf("%p [%p]: PERF_RECORD_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
+	dump_printf("(IP, %d): %d/%d: %p period: %Ld\n",
 		event->header.misc,
 		event->ip.pid, event->ip.tid,
 		(void *)(long)ip,
 		(long long)period);
 
+	if (thread == NULL) {
+		pr_debug("problem processing %d event, skipping it.\n",
+			 event->header.type);
+		return -1;
+	}
+
 	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
 
-	if (thread == NULL) {
-		eprintf("problem processing %d event, skipping it.\n",
-			event->header.type);
-		return -1;
-	}
+	if (profile_cpu != -1 && profile_cpu != (int) cpu)
+		return 0;
 
-	cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
-
-	if (cpumode == PERF_RECORD_MISC_KERNEL) {
-		show = SHOW_KERNEL;
-		level = 'k';
-
-		dso = kernel_dso;
-
-		dump_printf(" ...... dso: %s\n", dso->name);
-
-	} else if (cpumode == PERF_RECORD_MISC_USER) {
-
-		show = SHOW_USER;
-		level = '.';
-
-	} else {
-		show = SHOW_HV;
-		level = 'H';
-
-		dso = hypervisor_dso;
-
-		dump_printf(" ...... dso: [hypervisor]\n");
-	}
-
-	if (sample_type & PERF_SAMPLE_RAW)
-		process_raw_event(event, more_data, cpu, timestamp, thread);
+	process_raw_event(event, more_data, cpu, timestamp, thread);
 
 	return 0;
 }
 
-static int
-process_event(event_t *event, unsigned long offset, unsigned long head)
+static int process_lost_event(event_t *event __used)
 {
-	trace_event(event);
+	nr_lost_chunks++;
+	nr_lost_events += event->lost.lost;
 
-	nr_events++;
-	switch (event->header.type) {
-	case PERF_RECORD_MMAP:
-		return 0;
-	case PERF_RECORD_LOST:
-		nr_lost_chunks++;
-		nr_lost_events += event->lost.lost;
-		return 0;
+	return 0;
+}
 
-	case PERF_RECORD_COMM:
-		return process_comm_event(event, offset, head);
+static int sample_type_check(u64 type)
+{
+	sample_type = type;
 
-	case PERF_RECORD_EXIT ... PERF_RECORD_READ:
-		return 0;
-
-	case PERF_RECORD_SAMPLE:
-		return process_sample_event(event, offset, head);
-
-	case PERF_RECORD_MAX:
-	default:
+	if (!(sample_type & PERF_SAMPLE_RAW)) {
+		fprintf(stderr,
+			"No trace sample to read. Did you call perf record "
+			"without -R?");
 		return -1;
 	}
 
 	return 0;
 }
 
+static struct perf_file_handler file_handler = {
+	.process_sample_event	= process_sample_event,
+	.process_comm_event	= event__process_comm,
+	.process_lost_event	= process_lost_event,
+	.sample_type_check	= sample_type_check,
+};
+
 static int read_events(void)
 {
-	int ret, rc = EXIT_FAILURE;
-	unsigned long offset = 0;
-	unsigned long head = 0;
-	struct stat perf_stat;
-	event_t *event;
-	uint32_t size;
-	char *buf;
+	register_idle_thread();
+	register_perf_file_handler(&file_handler);
 
-	trace_report();
-	register_idle_thread(&threads, &last_match);
-
-	input = open(input_name, O_RDONLY);
-	if (input < 0) {
-		perror("failed to open file");
-		exit(-1);
-	}
-
-	ret = fstat(input, &perf_stat);
-	if (ret < 0) {
-		perror("failed to stat file");
-		exit(-1);
-	}
-
-	if (!perf_stat.st_size) {
-		fprintf(stderr, "zero-sized file, nothing to do!\n");
-		exit(0);
-	}
-	header = perf_header__read(input);
-	head = header->data_offset;
-	sample_type = perf_header__sample_type(header);
-
-	if (!(sample_type & PERF_SAMPLE_RAW))
-		die("No trace sample to read. Did you call perf record "
-		    "without -R?");
-
-	if (load_kernel() < 0) {
-		perror("failed to load kernel symbols");
-		return EXIT_FAILURE;
-	}
-
-remap:
-	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
-			   MAP_SHARED, input, offset);
-	if (buf == MAP_FAILED) {
-		perror("failed to mmap file");
-		exit(-1);
-	}
-
-more:
-	event = (event_t *)(buf + head);
-
-	size = event->header.size;
-	if (!size)
-		size = 8;
-
-	if (head + event->header.size >= page_size * mmap_window) {
-		unsigned long shift = page_size * (head / page_size);
-		int res;
-
-		res = munmap(buf, page_size * mmap_window);
-		assert(res == 0);
-
-		offset += shift;
-		head -= shift;
-		goto remap;
-	}
-
-	size = event->header.size;
-
-
-	if (!size || process_event(event, offset, head) < 0) {
-
-		/*
-		 * assume we lost track of the stream, check alignment, and
-		 * increment a single u64 in the hope to catch on again 'soon'.
-		 */
-
-		if (unlikely(head & 7))
-			head &= ~7ULL;
-
-		size = 8;
-	}
-
-	head += size;
-
-	if (offset + head < (unsigned long)perf_stat.st_size)
-		goto more;
-
-	rc = EXIT_SUCCESS;
-	close(input);
-
-	return rc;
+	return mmap_dispatch_perf_file(&header, input_name, 0, 0,
+				       &event__cwdlen, &event__cwd);
 }
 
 static void print_bad_events(void)
@@ -1883,6 +1823,8 @@
 		   "sort by key(s): runtime, switch, avg, max"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show symbol address, etc)"),
+	OPT_INTEGER('C', "CPU", &profile_cpu,
+		    "CPU to profile on"),
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
 	OPT_END()
@@ -1960,8 +1902,7 @@
 
 int cmd_sched(int argc, const char **argv, const char *prefix __used)
 {
-	symbol__init();
-	page_size = getpagesize();
+	symbol__init(0);
 
 	argc = parse_options(argc, argv, sched_options, sched_usage,
 			     PARSE_OPT_STOP_AT_NON_OPTION);
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 3db31e7..c70d720 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -50,15 +50,17 @@
 
 static struct perf_event_attr default_attrs[] = {
 
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK	},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS	},
-  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK		},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES	},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS		},
+  { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS		},
 
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS	},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
-  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_BRANCH_MISSES		},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES	},
+  { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES		},
 
 };
 
@@ -125,6 +127,7 @@
 struct stats			runtime_nsecs_stats;
 struct stats			walltime_nsecs_stats;
 struct stats			runtime_cycles_stats;
+struct stats			runtime_branches_stats;
 
 #define MATCH_EVENT(t, c, counter)			\
 	(attrs[counter].type == PERF_TYPE_##t &&	\
@@ -235,6 +238,8 @@
 		update_stats(&runtime_nsecs_stats, count[0]);
 	if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
 		update_stats(&runtime_cycles_stats, count[0]);
+	if (MATCH_EVENT(HARDWARE, HW_BRANCH_INSTRUCTIONS, counter))
+		update_stats(&runtime_branches_stats, count[0]);
 }
 
 static int run_perf_stat(int argc __used, const char **argv)
@@ -352,7 +357,16 @@
 			ratio = avg / total;
 
 		fprintf(stderr, " # %10.3f IPC  ", ratio);
-	} else {
+	} else if (MATCH_EVENT(HARDWARE, HW_BRANCH_MISSES, counter) &&
+			runtime_branches_stats.n != 0) {
+		total = avg_stats(&runtime_branches_stats);
+
+		if (total)
+			ratio = avg * 100 / total;
+
+		fprintf(stderr, " # %10.3f %%    ", ratio);
+
+	} else if (runtime_nsecs_stats.n != 0) {
 		total = avg_stats(&runtime_nsecs_stats);
 
 		if (total)
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index e8a510d9..cb58b66 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -29,14 +29,14 @@
 #include "util/header.h"
 #include "util/parse-options.h"
 #include "util/parse-events.h"
+#include "util/event.h"
+#include "util/data_map.h"
 #include "util/svghelper.h"
 
 static char		const *input_name = "perf.data";
 static char		const *output_name = "output.svg";
 
 
-static unsigned long	page_size;
-static unsigned long	mmap_window = 32;
 static u64		sample_type;
 
 static unsigned int	numcpus;
@@ -49,8 +49,6 @@
 static int		power_only;
 
 
-static struct perf_header	*header;
-
 struct per_pid;
 struct per_pidcomm;
 
@@ -153,6 +151,17 @@
 
 struct sample_wrapper *all_samples;
 
+
+struct process_filter;
+struct process_filter {
+	char			*name;
+	int			pid;
+	struct process_filter	*next;
+};
+
+static struct process_filter *process_filter;
+
+
 static struct per_pid *find_create_pid(int pid)
 {
 	struct per_pid *cursor = all_data;
@@ -763,11 +772,11 @@
 				c = p->all;
 				while (c) {
 					if (c->Y && c->start_time <= we->time && c->end_time >= we->time) {
-						if (p->pid == we->waker) {
+						if (p->pid == we->waker && !from) {
 							from = c->Y;
 							task_from = strdup(c->comm);
 						}
-						if (p->pid == we->wakee) {
+						if (p->pid == we->wakee && !to) {
 							to = c->Y;
 							task_to = strdup(c->comm);
 						}
@@ -882,12 +891,89 @@
 	}
 }
 
+static void add_process_filter(const char *string)
+{
+	struct process_filter *filt;
+	int pid;
+
+	pid = strtoull(string, NULL, 10);
+	filt = malloc(sizeof(struct process_filter));
+	if (!filt)
+		return;
+
+	filt->name = strdup(string);
+	filt->pid  = pid;
+	filt->next = process_filter;
+
+	process_filter = filt;
+}
+
+static int passes_filter(struct per_pid *p, struct per_pidcomm *c)
+{
+	struct process_filter *filt;
+	if (!process_filter)
+		return 1;
+
+	filt = process_filter;
+	while (filt) {
+		if (filt->pid && p->pid == filt->pid)
+			return 1;
+		if (strcmp(filt->name, c->comm) == 0)
+			return 1;
+		filt = filt->next;
+	}
+	return 0;
+}
+
+static int determine_display_tasks_filtered(void)
+{
+	struct per_pid *p;
+	struct per_pidcomm *c;
+	int count = 0;
+
+	p = all_data;
+	while (p) {
+		p->display = 0;
+		if (p->start_time == 1)
+			p->start_time = first_time;
+
+		/* no exit marker, task kept running to the end */
+		if (p->end_time == 0)
+			p->end_time = last_time;
+
+		c = p->all;
+
+		while (c) {
+			c->display = 0;
+
+			if (c->start_time == 1)
+				c->start_time = first_time;
+
+			if (passes_filter(p, c)) {
+				c->display = 1;
+				p->display = 1;
+				count++;
+			}
+
+			if (c->end_time == 0)
+				c->end_time = last_time;
+
+			c = c->next;
+		}
+		p = p->next;
+	}
+	return count;
+}
+
 static int determine_display_tasks(u64 threshold)
 {
 	struct per_pid *p;
 	struct per_pidcomm *c;
 	int count = 0;
 
+	if (process_filter)
+		return determine_display_tasks_filtered();
+
 	p = all_data;
 	while (p) {
 		p->display = 0;
@@ -957,36 +1043,6 @@
 	svg_close();
 }
 
-static int
-process_event(event_t *event)
-{
-
-	switch (event->header.type) {
-
-	case PERF_RECORD_COMM:
-		return process_comm_event(event);
-	case PERF_RECORD_FORK:
-		return process_fork_event(event);
-	case PERF_RECORD_EXIT:
-		return process_exit_event(event);
-	case PERF_RECORD_SAMPLE:
-		return queue_sample_event(event);
-
-	/*
-	 * We dont process them right now but they are fine:
-	 */
-	case PERF_RECORD_MMAP:
-	case PERF_RECORD_THROTTLE:
-	case PERF_RECORD_UNTHROTTLE:
-		return 0;
-
-	default:
-		return -1;
-	}
-
-	return 0;
-}
-
 static void process_samples(void)
 {
 	struct sample_wrapper *cursor;
@@ -1002,107 +1058,38 @@
 	}
 }
 
+static int sample_type_check(u64 type)
+{
+	sample_type = type;
+
+	if (!(sample_type & PERF_SAMPLE_RAW)) {
+		fprintf(stderr, "No trace samples found in the file.\n"
+				"Have you used 'perf timechart record' to record it?\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static struct perf_file_handler file_handler = {
+	.process_comm_event	= process_comm_event,
+	.process_fork_event	= process_fork_event,
+	.process_exit_event	= process_exit_event,
+	.process_sample_event	= queue_sample_event,
+	.sample_type_check	= sample_type_check,
+};
 
 static int __cmd_timechart(void)
 {
-	int ret, rc = EXIT_FAILURE;
-	unsigned long offset = 0;
-	unsigned long head, shift;
-	struct stat statbuf;
-	event_t *event;
-	uint32_t size;
-	char *buf;
-	int input;
+	struct perf_header *header;
+	int ret;
 
-	input = open(input_name, O_RDONLY);
-	if (input < 0) {
-		fprintf(stderr, " failed to open file: %s", input_name);
-		if (!strcmp(input_name, "perf.data"))
-			fprintf(stderr, "  (try 'perf record' first)");
-		fprintf(stderr, "\n");
-		exit(-1);
-	}
+	register_perf_file_handler(&file_handler);
 
-	ret = fstat(input, &statbuf);
-	if (ret < 0) {
-		perror("failed to stat file");
-		exit(-1);
-	}
-
-	if (!statbuf.st_size) {
-		fprintf(stderr, "zero-sized file, nothing to do!\n");
-		exit(0);
-	}
-
-	header = perf_header__read(input);
-	head = header->data_offset;
-
-	sample_type = perf_header__sample_type(header);
-
-	shift = page_size * (head / page_size);
-	offset += shift;
-	head -= shift;
-
-remap:
-	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
-			   MAP_SHARED, input, offset);
-	if (buf == MAP_FAILED) {
-		perror("failed to mmap file");
-		exit(-1);
-	}
-
-more:
-	event = (event_t *)(buf + head);
-
-	size = event->header.size;
-	if (!size)
-		size = 8;
-
-	if (head + event->header.size >= page_size * mmap_window) {
-		int ret2;
-
-		shift = page_size * (head / page_size);
-
-		ret2 = munmap(buf, page_size * mmap_window);
-		assert(ret2 == 0);
-
-		offset += shift;
-		head -= shift;
-		goto remap;
-	}
-
-	size = event->header.size;
-
-	if (!size || process_event(event) < 0) {
-
-		printf("%p [%p]: skipping unknown header type: %d\n",
-			(void *)(offset + head),
-			(void *)(long)(event->header.size),
-			event->header.type);
-
-		/*
-		 * assume we lost track of the stream, check alignment, and
-		 * increment a single u64 in the hope to catch on again 'soon'.
-		 */
-
-		if (unlikely(head & 7))
-			head &= ~7ULL;
-
-		size = 8;
-	}
-
-	head += size;
-
-	if (offset + head >= header->data_offset + header->data_size)
-		goto done;
-
-	if (offset + head < (unsigned long)statbuf.st_size)
-		goto more;
-
-done:
-	rc = EXIT_SUCCESS;
-	close(input);
-
+	ret = mmap_dispatch_perf_file(&header, input_name, 0, 0,
+				      &event__cwdlen, &event__cwd);
+	if (ret)
+		return EXIT_FAILURE;
 
 	process_samples();
 
@@ -1112,9 +1099,10 @@
 
 	write_svg_file(output_name);
 
-	printf("Written %2.1f seconds of trace to %s.\n", (last_time - first_time) / 1000000000.0, output_name);
+	pr_info("Written %2.1f seconds of trace to %s.\n",
+		(last_time - first_time) / 1000000000.0, output_name);
 
-	return rc;
+	return EXIT_SUCCESS;
 }
 
 static const char * const timechart_usage[] = {
@@ -1153,6 +1141,14 @@
 	return cmd_record(i, rec_argv, NULL);
 }
 
+static int
+parse_process(const struct option *opt __used, const char *arg, int __used unset)
+{
+	if (arg)
+		add_process_filter(arg);
+	return 0;
+}
+
 static const struct option options[] = {
 	OPT_STRING('i', "input", &input_name, "file",
 		    "input file name"),
@@ -1160,17 +1156,18 @@
 		    "output file name"),
 	OPT_INTEGER('w', "width", &svg_page_width,
 		    "page width"),
-	OPT_BOOLEAN('p', "power-only", &power_only,
+	OPT_BOOLEAN('P', "power-only", &power_only,
 		    "output power data only"),
+	OPT_CALLBACK('p', "process", NULL, "process",
+		      "process selector. Pass a pid or process name.",
+		       parse_process),
 	OPT_END()
 };
 
 
 int cmd_timechart(int argc, const char **argv, const char *prefix __used)
 {
-	symbol__init();
-
-	page_size = getpagesize();
+	symbol__init(0);
 
 	argc = parse_options(argc, argv, options, timechart_usage,
 			PARSE_OPT_STOP_AT_NON_OPTION);
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index e23bc74..e0a374d 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -22,6 +22,7 @@
 
 #include "util/symbol.h"
 #include "util/color.h"
+#include "util/thread.h"
 #include "util/util.h"
 #include <linux/rbtree.h>
 #include "util/parse-options.h"
@@ -54,26 +55,31 @@
 
 static int			fd[MAX_NR_CPUS][MAX_COUNTERS];
 
-static int			system_wide			=  0;
+static int			system_wide			=      0;
 
-static int			default_interval		= 100000;
+static int			default_interval		=      0;
 
-static int			count_filter			=  5;
-static int			print_entries			= 15;
+static int			count_filter			=      5;
+static int			print_entries;
 
-static int			target_pid			= -1;
-static int			inherit				=  0;
-static int			profile_cpu			= -1;
-static int			nr_cpus				=  0;
-static unsigned int		realtime_prio			=  0;
-static int			group				=  0;
+static int			target_pid			=     -1;
+static int			inherit				=      0;
+static int			profile_cpu			=     -1;
+static int			nr_cpus				=      0;
+static unsigned int		realtime_prio			=      0;
+static int			group				=      0;
 static unsigned int		page_size;
-static unsigned int		mmap_pages			= 16;
-static int			freq				=  0;
+static unsigned int		mmap_pages			=     16;
+static int			freq				=   1000; /* 1 KHz */
 
-static int			delay_secs			=  2;
-static int			zero;
-static int			dump_symtab;
+static int			delay_secs			=      2;
+static int			zero                            =      0;
+static int			dump_symtab                     =      0;
+
+static bool			hide_kernel_symbols		=  false;
+static bool			hide_user_symbols		=  false;
+static struct winsize		winsize;
+struct symbol_conf		symbol_conf;
 
 /*
  * Source
@@ -86,83 +92,126 @@
 	struct source_line	*next;
 };
 
-static char			*sym_filter			=  NULL;
-struct sym_entry		*sym_filter_entry		=  NULL;
-static int			sym_pcnt_filter			=  5;
-static int			sym_counter			=  0;
-static int			display_weighted		= -1;
+static char			*sym_filter			=   NULL;
+struct sym_entry		*sym_filter_entry		=   NULL;
+static int			sym_pcnt_filter			=      5;
+static int			sym_counter			=      0;
+static int			display_weighted		=     -1;
 
 /*
  * Symbols
  */
 
-static u64			min_ip;
-static u64			max_ip = -1ll;
+struct sym_entry_source {
+	struct source_line	*source;
+	struct source_line	*lines;
+	struct source_line	**lines_tail;
+	pthread_mutex_t		lock;
+};
 
 struct sym_entry {
 	struct rb_node		rb_node;
 	struct list_head	node;
-	unsigned long		count[MAX_COUNTERS];
 	unsigned long		snap_count;
 	double			weight;
 	int			skip;
-	struct source_line	*source;
-	struct source_line	*lines;
-	struct source_line	**lines_tail;
-	pthread_mutex_t		source_lock;
+	u16			name_len;
+	u8			origin;
+	struct map		*map;
+	struct sym_entry_source	*src;
+	unsigned long		count[0];
 };
 
 /*
  * Source functions
  */
 
+static inline struct symbol *sym_entry__symbol(struct sym_entry *self)
+{
+       return ((void *)self) + symbol_conf.priv_size;
+}
+
+static void get_term_dimensions(struct winsize *ws)
+{
+	char *s = getenv("LINES");
+
+	if (s != NULL) {
+		ws->ws_row = atoi(s);
+		s = getenv("COLUMNS");
+		if (s != NULL) {
+			ws->ws_col = atoi(s);
+			if (ws->ws_row && ws->ws_col)
+				return;
+		}
+	}
+#ifdef TIOCGWINSZ
+	if (ioctl(1, TIOCGWINSZ, ws) == 0 &&
+	    ws->ws_row && ws->ws_col)
+		return;
+#endif
+	ws->ws_row = 25;
+	ws->ws_col = 80;
+}
+
+static void update_print_entries(struct winsize *ws)
+{
+	print_entries = ws->ws_row;
+
+	if (print_entries > 9)
+		print_entries -= 9;
+}
+
+static void sig_winch_handler(int sig __used)
+{
+	get_term_dimensions(&winsize);
+	update_print_entries(&winsize);
+}
+
 static void parse_source(struct sym_entry *syme)
 {
 	struct symbol *sym;
-	struct module *module;
-	struct section *section = NULL;
+	struct sym_entry_source *source;
+	struct map *map;
 	FILE *file;
 	char command[PATH_MAX*2];
-	const char *path = vmlinux_name;
-	u64 start, end, len;
+	const char *path;
+	u64 len;
 
 	if (!syme)
 		return;
 
-	if (syme->lines) {
-		pthread_mutex_lock(&syme->source_lock);
+	if (syme->src == NULL) {
+		syme->src = zalloc(sizeof(*source));
+		if (syme->src == NULL)
+			return;
+		pthread_mutex_init(&syme->src->lock, NULL);
+	}
+
+	source = syme->src;
+
+	if (source->lines) {
+		pthread_mutex_lock(&source->lock);
 		goto out_assign;
 	}
 
-	sym = (struct symbol *)(syme + 1);
-	module = sym->module;
+	sym = sym_entry__symbol(syme);
+	map = syme->map;
+	path = map->dso->long_name;
 
-	if (module)
-		path = module->path;
-	if (!path)
-		return;
-
-	start = sym->obj_start;
-	if (!start)
-		start = sym->start;
-
-	if (module) {
-		section = module->sections->find_section(module->sections, ".text");
-		if (section)
-			start -= section->vma;
-	}
-
-	end = start + sym->end - sym->start + 1;
 	len = sym->end - sym->start;
 
-	sprintf(command, "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS %s", start, end, path);
+	sprintf(command,
+		"objdump --start-address=0x%016Lx "
+			 "--stop-address=0x%016Lx -dS %s",
+		map->unmap_ip(map, sym->start),
+		map->unmap_ip(map, sym->end), path);
 
 	file = popen(command, "r");
 	if (!file)
 		return;
 
-	pthread_mutex_lock(&syme->source_lock);
-	syme->lines_tail = &syme->lines;
+	pthread_mutex_lock(&source->lock);
+	source->lines_tail = &source->lines;
 	while (!feof(file)) {
 		struct source_line *src;
 		size_t dummy = 0;
@@ -182,24 +231,22 @@
 			*c = 0;
 
 		src->next = NULL;
-		*syme->lines_tail = src;
-		syme->lines_tail = &src->next;
+		*source->lines_tail = src;
+		source->lines_tail = &src->next;
 
 		if (strlen(src->line)>8 && src->line[8] == ':') {
 			src->eip = strtoull(src->line, NULL, 16);
-			if (section)
-				src->eip += section->vma;
+			src->eip = map->unmap_ip(map, src->eip);
 		}
 		if (strlen(src->line)>8 && src->line[16] == ':') {
 			src->eip = strtoull(src->line, NULL, 16);
-			if (section)
-				src->eip += section->vma;
+			src->eip = map->unmap_ip(map, src->eip);
 		}
 	}
 	pclose(file);
 out_assign:
 	sym_filter_entry = syme;
-	pthread_mutex_unlock(&syme->source_lock);
+	pthread_mutex_unlock(&source->lock);
 }
 
 static void __zero_source_counters(struct sym_entry *syme)
@@ -207,7 +254,7 @@
 	int i;
 	struct source_line *line;
 
-	line = syme->lines;
+	line = syme->src->lines;
 	while (line) {
 		for (i = 0; i < nr_counters; i++)
 			line->count[i] = 0;
@@ -222,13 +269,13 @@
 	if (syme != sym_filter_entry)
 		return;
 
-	if (pthread_mutex_trylock(&syme->source_lock))
+	if (pthread_mutex_trylock(&syme->src->lock))
 		return;
 
-	if (!syme->source)
+	if (syme->src == NULL || syme->src->source == NULL)
 		goto out_unlock;
 
-	for (line = syme->lines; line; line = line->next) {
+	for (line = syme->src->lines; line; line = line->next) {
 		if (line->eip == ip) {
 			line->count[counter]++;
 			break;
@@ -237,32 +284,25 @@
 			break;
 	}
 out_unlock:
-	pthread_mutex_unlock(&syme->source_lock);
+	pthread_mutex_unlock(&syme->src->lock);
 }
 
 static void lookup_sym_source(struct sym_entry *syme)
 {
-	struct symbol *symbol = (struct symbol *)(syme + 1);
+	struct symbol *symbol = sym_entry__symbol(syme);
 	struct source_line *line;
 	char pattern[PATH_MAX];
-	char *idx;
 
 	sprintf(pattern, "<%s>:", symbol->name);
 
-	if (symbol->module) {
-		idx = strstr(pattern, "\t");
-		if (idx)
-			*idx = 0;
-	}
-
-	pthread_mutex_lock(&syme->source_lock);
-	for (line = syme->lines; line; line = line->next) {
+	pthread_mutex_lock(&syme->src->lock);
+	for (line = syme->src->lines; line; line = line->next) {
 		if (strstr(line->line, pattern)) {
-			syme->source = line;
+			syme->src->source = line;
 			break;
 		}
 	}
-	pthread_mutex_unlock(&syme->source_lock);
+	pthread_mutex_unlock(&syme->src->lock);
 }
 
 static void show_lines(struct source_line *queue, int count, int total)
@@ -292,24 +332,24 @@
 	if (!syme)
 		return;
 
-	if (!syme->source)
+	if (!syme->src->source)
 		lookup_sym_source(syme);
 
-	if (!syme->source)
+	if (!syme->src->source)
 		return;
 
-	symbol = (struct symbol *)(syme + 1);
+	symbol = sym_entry__symbol(syme);
 	printf("Showing %s for %s\n", event_name(sym_counter), symbol->name);
 	printf("  Events  Pcnt (>=%d%%)\n", sym_pcnt_filter);
 
-	pthread_mutex_lock(&syme->source_lock);
-	line = syme->source;
+	pthread_mutex_lock(&syme->src->lock);
+	line = syme->src->source;
 	while (line) {
 		total += line->count[sym_counter];
 		line = line->next;
 	}
 
-	line = syme->source;
+	line = syme->src->source;
 	while (line) {
 		float pcnt = 0.0;
 
@@ -334,13 +374,13 @@
 		line->count[sym_counter] = zero ? 0 : line->count[sym_counter] * 7 / 8;
 		line = line->next;
 	}
-	pthread_mutex_unlock(&syme->source_lock);
+	pthread_mutex_unlock(&syme->src->lock);
 	if (more)
 		printf("%d lines not displayed, maybe increase display entries [e]\n", more);
 }
 
 /*
- * Symbols will be added here in record_ip and will get out
+ * Symbols will be added here in event__process_sample and will get out
  * after decayed.
  */
 static LIST_HEAD(active_symbols);
@@ -411,6 +451,8 @@
 	struct sym_entry *syme, *n;
 	struct rb_root tmp = RB_ROOT;
 	struct rb_node *nd;
+	int sym_width = 0, dso_width = 0, max_dso_width;
+	const int win_width = winsize.ws_col - 1;
 
 	samples = userspace_samples = 0;
 
@@ -422,6 +464,14 @@
 	list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
 		syme->snap_count = syme->count[snap];
 		if (syme->snap_count != 0) {
+
+			if ((hide_user_symbols &&
+			     syme->origin == PERF_RECORD_MISC_USER) ||
+			    (hide_kernel_symbols &&
+			     syme->origin == PERF_RECORD_MISC_KERNEL)) {
+				list_remove_active_sym(syme);
+				continue;
+			}
 			syme->weight = sym_weight(syme);
 			rb_insert_active_sym(&tmp, syme);
 			sum_ksamples += syme->snap_count;
@@ -434,8 +484,7 @@
 
 	puts(CONSOLE_CLEAR);
 
-	printf(
-"------------------------------------------------------------------------------\n");
+	printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
 	printf( "   PerfTop:%8.0f irqs/sec  kernel:%4.1f%% [",
 		samples_per_sec,
 		100.0 - (100.0*((samples_per_sec-ksamples_per_sec)/samples_per_sec)));
@@ -473,33 +522,57 @@
 			printf(", %d CPUs)\n", nr_cpus);
 	}
 
-	printf("------------------------------------------------------------------------------\n\n");
+	printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
 
 	if (sym_filter_entry) {
 		show_details(sym_filter_entry);
 		return;
 	}
 
+	/*
+	 * Find the longest symbol name that will be displayed
+	 */
+	for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
+		syme = rb_entry(nd, struct sym_entry, rb_node);
+		if (++printed > print_entries ||
+		    (int)syme->snap_count < count_filter)
+			continue;
+
+		if (syme->map->dso->long_name_len > dso_width)
+			dso_width = syme->map->dso->long_name_len;
+
+		if (syme->name_len > sym_width)
+			sym_width = syme->name_len;
+	}
+
+	printed = 0;
+
+	max_dso_width = winsize.ws_col - sym_width - 29;
+	if (dso_width > max_dso_width)
+		dso_width = max_dso_width;
+	putchar('\n');
 	if (nr_counters == 1)
-		printf("             samples    pcnt");
+		printf("             samples  pcnt");
 	else
-		printf("   weight    samples    pcnt");
+		printf("   weight    samples  pcnt");
 
 	if (verbose)
 		printf("         RIP       ");
-	printf("   kernel function\n");
-	printf("   %s    _______   _____",
+	printf(" %-*.*s DSO\n", sym_width, sym_width, "function");
+	printf("   %s    _______ _____",
 	       nr_counters == 1 ? "      " : "______");
 	if (verbose)
-		printf("   ________________");
-	printf("   _______________\n\n");
+		printf(" ________________");
+	printf(" %-*.*s", sym_width, sym_width, graph_line);
+	printf(" %-*.*s", dso_width, dso_width, graph_line);
+	puts("\n");
 
 	for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
 		struct symbol *sym;
 		double pcnt;
 
 		syme = rb_entry(nd, struct sym_entry, rb_node);
-		sym = (struct symbol *)(syme + 1);
+		sym = sym_entry__symbol(syme);
 
 		if (++printed > print_entries || (int)syme->snap_count < count_filter)
 			continue;
@@ -508,17 +581,18 @@
 					 sum_ksamples));
 
 		if (nr_counters == 1 || !display_weighted)
-			printf("%20.2f - ", syme->weight);
+			printf("%20.2f ", syme->weight);
 		else
-			printf("%9.1f %10ld - ", syme->weight, syme->snap_count);
+			printf("%9.1f %10ld ", syme->weight, syme->snap_count);
 
 		percent_color_fprintf(stdout, "%4.1f%%", pcnt);
 		if (verbose)
-			printf(" - %016llx", sym->start);
-		printf(" : %s", sym->name);
-		if (sym->module)
-			printf("\t[%s]", sym->module->name);
-		printf("\n");
+			printf(" %016llx", sym->start);
+		printf(" %-*.*s", sym_width, sym_width, sym->name);
+		printf(" %-*.*s\n", dso_width, dso_width,
+		       dso_width >= syme->map->dso->long_name_len ?
+					syme->map->dso->long_name :
+					syme->map->dso->short_name);
 	}
 }
 
@@ -565,10 +639,10 @@
 
 	/* zero counters of active symbol */
 	if (syme) {
-		pthread_mutex_lock(&syme->source_lock);
+		pthread_mutex_lock(&syme->src->lock);
 		__zero_source_counters(syme);
 		*target = NULL;
-		pthread_mutex_unlock(&syme->source_lock);
+		pthread_mutex_unlock(&syme->src->lock);
 	}
 
 	fprintf(stdout, "\n%s: ", msg);
@@ -584,7 +658,7 @@
 	pthread_mutex_unlock(&active_symbols_lock);
 
 	list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
-		struct symbol *sym = (struct symbol *)(syme + 1);
+		struct symbol *sym = sym_entry__symbol(syme);
 
 		if (!strcmp(buf, sym->name)) {
 			found = syme;
@@ -608,7 +682,7 @@
 	char *name = NULL;
 
 	if (sym_filter_entry) {
-		struct symbol *sym = (struct symbol *)(sym_filter_entry+1);
+		struct symbol *sym = sym_entry__symbol(sym_filter_entry);
 		name = sym->name;
 	}
 
@@ -621,7 +695,7 @@
 
 	fprintf(stdout, "\t[f]     profile display filter (count).    \t(%d)\n", count_filter);
 
-	if (vmlinux_name) {
+	if (symbol_conf.vmlinux_name) {
 		fprintf(stdout, "\t[F]     annotate display filter (percent). \t(%d%%)\n", sym_pcnt_filter);
 		fprintf(stdout, "\t[s]     annotate symbol.                   \t(%s)\n", name?: "NULL");
 		fprintf(stdout, "\t[S]     stop annotation.\n");
@@ -630,6 +704,12 @@
 	if (nr_counters > 1)
 		fprintf(stdout, "\t[w]     toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
 
+	fprintf(stdout,
+		"\t[K]     hide kernel_symbols symbols.             \t(%s)\n",
+		hide_kernel_symbols ? "yes" : "no");
+	fprintf(stdout,
+		"\t[U]     hide user symbols.               \t(%s)\n",
+		hide_user_symbols ? "yes" : "no");
 	fprintf(stdout, "\t[z]     toggle sample zeroing.             \t(%d)\n", zero ? 1 : 0);
 	fprintf(stdout, "\t[qQ]    quit.\n");
 }
@@ -643,6 +723,8 @@
 		case 'z':
 		case 'q':
 		case 'Q':
+		case 'K':
+		case 'U':
 			return 1;
 		case 'E':
 		case 'w':
@@ -650,7 +732,7 @@
 		case 'F':
 		case 's':
 		case 'S':
-			return vmlinux_name ? 1 : 0;
+			return symbol_conf.vmlinux_name ? 1 : 0;
 		default:
 			break;
 	}
@@ -691,6 +773,11 @@
 			break;
 		case 'e':
 			prompt_integer(&print_entries, "Enter display entries (lines)");
+			if (print_entries == 0) {
+				sig_winch_handler(SIGWINCH);
+				signal(SIGWINCH, sig_winch_handler);
+			} else
+				signal(SIGWINCH, SIG_DFL);
 			break;
 		case 'E':
 			if (nr_counters > 1) {
@@ -715,9 +802,14 @@
 		case 'F':
 			prompt_percent(&sym_pcnt_filter, "Enter details display event filter (percent)");
 			break;
+		case 'K':
+			hide_kernel_symbols = !hide_kernel_symbols;
+			break;
 		case 'q':
 		case 'Q':
 			printf("exiting.\n");
+			if (dump_symtab)
+				dsos__fprintf(stderr);
 			exit(0);
 		case 's':
 			prompt_symbol(&sym_filter_entry, "Enter details symbol");
@@ -728,12 +820,15 @@
 			else {
 				struct sym_entry *syme = sym_filter_entry;
 
-				pthread_mutex_lock(&syme->source_lock);
+				pthread_mutex_lock(&syme->src->lock);
 				sym_filter_entry = NULL;
 				__zero_source_counters(syme);
-				pthread_mutex_unlock(&syme->source_lock);
+				pthread_mutex_unlock(&syme->src->lock);
 			}
 			break;
+		case 'U':
+			hide_user_symbols = !hide_user_symbols;
+			break;
 		case 'w':
 			display_weighted = ~display_weighted;
 			break;
@@ -790,7 +885,7 @@
 	NULL
 };
 
-static int symbol_filter(struct dso *self, struct symbol *sym)
+static int symbol_filter(struct map *map, struct symbol *sym)
 {
 	struct sym_entry *syme;
 	const char *name = sym->name;
@@ -812,8 +907,9 @@
 	    strstr(name, "_text_end"))
 		return 1;
 
-	syme = dso__sym_priv(self, sym);
-	pthread_mutex_init(&syme->source_lock, NULL);
+	syme = symbol__priv(sym);
+	syme->map = map;
+	syme->src = NULL;
 	if (!sym_filter_entry && sym_filter && !strcmp(name, sym_filter))
 		sym_filter_entry = syme;
 
@@ -824,75 +920,65 @@
 		}
 	}
 
+	if (!syme->skip)
+		syme->name_len = strlen(sym->name);
+
 	return 0;
 }
 
-static int parse_symbols(void)
+static void event__process_sample(const event_t *self, int counter)
 {
-	struct rb_node *node;
-	struct symbol  *sym;
-	int use_modules = vmlinux_name ? 1 : 0;
+	u64 ip = self->ip.ip;
+	struct sym_entry *syme;
+	struct addr_location al;
+	u8 origin = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 
-	kernel_dso = dso__new("[kernel]", sizeof(struct sym_entry));
-	if (kernel_dso == NULL)
-		return -1;
-
-	if (dso__load_kernel(kernel_dso, vmlinux_name, symbol_filter, verbose, use_modules) <= 0)
-		goto out_delete_dso;
-
-	node = rb_first(&kernel_dso->syms);
-	sym = rb_entry(node, struct symbol, rb_node);
-	min_ip = sym->start;
-
-	node = rb_last(&kernel_dso->syms);
-	sym = rb_entry(node, struct symbol, rb_node);
-	max_ip = sym->end;
-
-	if (dump_symtab)
-		dso__fprintf(kernel_dso, stderr);
-
-	return 0;
-
-out_delete_dso:
-	dso__delete(kernel_dso);
-	kernel_dso = NULL;
-	return -1;
-}
-
-/*
- * Binary search in the histogram table and record the hit:
- */
-static void record_ip(u64 ip, int counter)
-{
-	struct symbol *sym = dso__find_symbol(kernel_dso, ip);
-
-	if (sym != NULL) {
-		struct sym_entry *syme = dso__sym_priv(kernel_dso, sym);
-
-		if (!syme->skip) {
-			syme->count[counter]++;
-			record_precise_ip(syme, counter, ip);
-			pthread_mutex_lock(&active_symbols_lock);
-			if (list_empty(&syme->node) || !syme->node.next)
-				__list_insert_active_sym(syme);
-			pthread_mutex_unlock(&active_symbols_lock);
+	switch (origin) {
+	case PERF_RECORD_MISC_USER:
+		if (hide_user_symbols)
 			return;
-		}
-	}
-
-	samples--;
-}
-
-static void process_event(u64 ip, int counter, int user)
-{
-	samples++;
-
-	if (user) {
-		userspace_samples++;
+		break;
+	case PERF_RECORD_MISC_KERNEL:
+		if (hide_kernel_symbols)
+			return;
+		break;
+	default:
 		return;
 	}
 
-	record_ip(ip, counter);
+	if (event__preprocess_sample(self, &al, symbol_filter) < 0 ||
+	    al.sym == NULL)
+		return;
+
+	syme = symbol__priv(al.sym);
+	if (!syme->skip) {
+		syme->count[counter]++;
+		syme->origin = origin;
+		record_precise_ip(syme, counter, ip);
+		pthread_mutex_lock(&active_symbols_lock);
+		if (list_empty(&syme->node) || !syme->node.next)
+			__list_insert_active_sym(syme);
+		pthread_mutex_unlock(&active_symbols_lock);
+		if (origin == PERF_RECORD_MISC_USER)
+			++userspace_samples;
+		++samples;
+	}
+}
+
+static int event__process(event_t *event)
+{
+	switch (event->header.type) {
+	case PERF_RECORD_COMM:
+		event__process_comm(event);
+		break;
+	case PERF_RECORD_MMAP:
+		event__process_mmap(event);
+		break;
+	default:
+		break;
+	}
+
+	return 0;
 }
 
 struct mmap_data {
@@ -913,8 +999,6 @@
 	return head;
 }
 
-struct timeval last_read, this_read;
-
 static void mmap_read_counter(struct mmap_data *md)
 {
 	unsigned int head = mmap_read_head(md);
@@ -922,8 +1006,6 @@
 	unsigned char *data = md->base + page_size;
 	int diff;
 
-	gettimeofday(&this_read, NULL);
-
 	/*
 	 * If we're further behind than half the buffer, there's a chance
 	 * the writer will bite our tail and mess up the samples under us.
@@ -934,14 +1016,7 @@
 	 */
 	diff = head - old;
 	if (diff > md->mask / 2 || diff < 0) {
-		struct timeval iv;
-		unsigned long msecs;
-
-		timersub(&this_read, &last_read, &iv);
-		msecs = iv.tv_sec*1000 + iv.tv_usec/1000;
-
-		fprintf(stderr, "WARNING: failed to keep up with mmap data."
-				"  Last read %lu msecs ago.\n", msecs);
+		fprintf(stderr, "WARNING: failed to keep up with mmap data.\n");
 
 		/*
 		 * head points to a known good entry, start there.
@@ -949,8 +1024,6 @@
 		old = head;
 	}
 
-	last_read = this_read;
-
 	for (; old != head;) {
 		event_t *event = (event_t *)&data[old & md->mask];
 
@@ -978,13 +1051,11 @@
 			event = &event_copy;
 		}
 
+		if (event->header.type == PERF_RECORD_SAMPLE)
+			event__process_sample(event, md->counter);
+		else
+			event__process(event);
 		old += size;
-
-		if (event->header.type == PERF_RECORD_SAMPLE) {
-			int user =
-	(event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK) == PERF_RECORD_MISC_USER;
-			process_event(event->ip.ip, md->counter, user);
-		}
 	}
 
 	md->prev = old;
@@ -1018,8 +1089,15 @@
 	attr = attrs + counter;
 
 	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
-	attr->freq		= freq;
+
+	if (freq) {
+		attr->sample_type	|= PERF_SAMPLE_PERIOD;
+		attr->freq		= 1;
+		attr->sample_freq	= freq;
+	}
+
 	attr->inherit		= (cpu < 0) && inherit;
+	attr->mmap		= 1;
 
 try_again:
 	fd[i][counter] = sys_perf_event_open(attr, target_pid, cpu, group_fd, 0);
@@ -1078,6 +1156,11 @@
 	int i, counter;
 	int ret;
 
+	if (target_pid != -1)
+		event__synthesize_thread(target_pid, event__process);
+	else
+		event__synthesize_threads(event__process);
+
 	for (i = 0; i < nr_cpus; i++) {
 		group_fd = -1;
 		for (counter = 0; counter < nr_counters; counter++)
@@ -1133,7 +1216,10 @@
 			    "system-wide collection from all CPUs"),
 	OPT_INTEGER('C', "CPU", &profile_cpu,
 		    "CPU to profile on"),
-	OPT_STRING('k', "vmlinux", &vmlinux_name, "file", "vmlinux pathname"),
+	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
+		   "file", "vmlinux pathname"),
+	OPT_BOOLEAN('K', "hide_kernel_symbols", &hide_kernel_symbols,
+		    "hide kernel symbols"),
 	OPT_INTEGER('m', "mmap-pages", &mmap_pages,
 		    "number of mmap data pages"),
 	OPT_INTEGER('r', "realtime", &realtime_prio,
@@ -1156,6 +1242,8 @@
 		    "profile at this frequency"),
 	OPT_INTEGER('E', "entries", &print_entries,
 		    "display this many functions"),
+	OPT_BOOLEAN('U', "hide_user_symbols", &hide_user_symbols,
+		    "hide user symbols"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_END()
@@ -1165,19 +1253,12 @@
 {
 	int counter;
 
-	symbol__init();
-
 	page_size = sysconf(_SC_PAGE_SIZE);
 
 	argc = parse_options(argc, argv, options, top_usage, 0);
 	if (argc)
 		usage_with_options(top_usage, options);
 
-	if (freq) {
-		default_interval = freq;
-		freq = 1;
-	}
-
 	/* CPU and PID are mutually exclusive */
 	if (target_pid != -1 && profile_cpu != -1) {
 		printf("WARNING: PID switch overriding CPU\n");
@@ -1188,13 +1269,31 @@
 	if (!nr_counters)
 		nr_counters = 1;
 
+	symbol_conf.priv_size = (sizeof(struct sym_entry) +
+				 (nr_counters + 1) * sizeof(unsigned long));
+	if (symbol_conf.vmlinux_name == NULL)
+		symbol_conf.try_vmlinux_path = true;
+	if (symbol__init(&symbol_conf) < 0)
+		return -1;
+
 	if (delay_secs < 1)
 		delay_secs = 1;
 
-	parse_symbols();
 	parse_source(sym_filter_entry);
 
 	/*
+	 * User specified count overrides default frequency.
+	 */
+	if (default_interval)
+		freq = 0;
+	else if (freq) {
+		default_interval = freq;
+	} else {
+		fprintf(stderr, "frequency and count are zero, aborting\n");
+		exit(EXIT_FAILURE);
+	}
+
+	/*
 	 * Fill in the ones not specifically initialized via -c:
 	 */
 	for (counter = 0; counter < nr_counters; counter++) {
@@ -1211,5 +1310,11 @@
 	if (target_pid != -1 || profile_cpu != -1)
 		nr_cpus = 1;
 
+	get_term_dimensions(&winsize);
+	if (print_entries == 0) {
+		update_print_entries(&winsize);
+		signal(SIGWINCH, sig_winch_handler);
+	}
+
 	return __cmd_top();
 }
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 0c5e4f7..abb914a 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -5,6 +5,50 @@
 #include "util/symbol.h"
 #include "util/thread.h"
 #include "util/header.h"
+#include "util/exec_cmd.h"
+#include "util/trace-event.h"
+
+static char const		*script_name;
+static char const		*generate_script_lang;
+
+static int default_start_script(const char *script __attribute((unused)))
+{
+	return 0;
+}
+
+static int default_stop_script(void)
+{
+	return 0;
+}
+
+static int default_generate_script(const char *outfile __attribute ((unused)))
+{
+	return 0;
+}
+
+static struct scripting_ops default_scripting_ops = {
+	.start_script		= default_start_script,
+	.stop_script		= default_stop_script,
+	.process_event		= print_event,
+	.generate_script	= default_generate_script,
+};
+
+static struct scripting_ops	*scripting_ops;
+
+static void setup_scripting(void)
+{
+	/* make sure PERF_EXEC_PATH is set for scripts */
+	perf_set_argv_exec_path(perf_exec_path());
+
+	setup_perl_scripting();
+
+	scripting_ops = &default_scripting_ops;
+}
+
+static int cleanup_scripting(void)
+{
+	return scripting_ops->stop_script();
+}
 
 #include "util/parse-options.h"
 
@@ -12,59 +56,22 @@
 #include "util/debug.h"
 
 #include "util/trace-event.h"
+#include "util/data_map.h"
+#include "util/exec_cmd.h"
 
-static char		const *input_name = "perf.data";
-static int		input;
-static unsigned long	page_size;
-static unsigned long	mmap_window = 32;
+static char const		*input_name = "perf.data";
 
-static unsigned long	total = 0;
-static unsigned long	total_comm = 0;
+static struct perf_header	*header;
+static u64			sample_type;
 
-static struct rb_root	threads;
-static struct thread	*last_match;
-
-static struct perf_header *header;
-static u64		sample_type;
-
-
-static int
-process_comm_event(event_t *event, unsigned long offset, unsigned long head)
+static int process_sample_event(event_t *event)
 {
-	struct thread *thread;
-
-	thread = threads__findnew(event->comm.pid, &threads, &last_match);
-
-	dump_printf("%p [%p]: PERF_RECORD_COMM: %s:%d\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
-		event->comm.comm, event->comm.pid);
-
-	if (thread == NULL ||
-	    thread__set_comm(thread, event->comm.comm)) {
-		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
-		return -1;
-	}
-	total_comm++;
-
-	return 0;
-}
-
-static int
-process_sample_event(event_t *event, unsigned long offset, unsigned long head)
-{
-	char level;
-	int show = 0;
-	struct dso *dso = NULL;
-	struct thread *thread;
 	u64 ip = event->ip.ip;
 	u64 timestamp = -1;
 	u32 cpu = -1;
 	u64 period = 1;
 	void *more_data = event->ip.__more_data;
-	int cpumode;
-
-	thread = threads__findnew(event->ip.pid, &threads, &last_match);
+	struct thread *thread = threads__findnew(event->ip.pid);
 
 	if (sample_type & PERF_SAMPLE_TIME) {
 		timestamp = *(u64 *)more_data;
@@ -82,45 +89,19 @@
 		more_data += sizeof(u64);
 	}
 
-	dump_printf("%p [%p]: PERF_RECORD_SAMPLE (IP, %d): %d/%d: %p period: %Ld\n",
-		(void *)(offset + head),
-		(void *)(long)(event->header.size),
+	dump_printf("(IP, %d): %d/%d: %p period: %Ld\n",
 		event->header.misc,
 		event->ip.pid, event->ip.tid,
 		(void *)(long)ip,
 		(long long)period);
 
-	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
-
 	if (thread == NULL) {
-		eprintf("problem processing %d event, skipping it.\n",
-			event->header.type);
+		pr_debug("problem processing %d event, skipping it.\n",
+			 event->header.type);
 		return -1;
 	}
 
-	cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
-
-	if (cpumode == PERF_RECORD_MISC_KERNEL) {
-		show = SHOW_KERNEL;
-		level = 'k';
-
-		dso = kernel_dso;
-
-		dump_printf(" ...... dso: %s\n", dso->name);
-
-	} else if (cpumode == PERF_RECORD_MISC_USER) {
-
-		show = SHOW_USER;
-		level = '.';
-
-	} else {
-		show = SHOW_HV;
-		level = 'H';
-
-		dso = hypervisor_dso;
-
-		dump_printf(" ...... dso: [hypervisor]\n");
-	}
+	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
 
 	if (sample_type & PERF_SAMPLE_RAW) {
 		struct {
@@ -133,128 +114,189 @@
 		 * field, although it should be the same than this perf
 		 * event pid
 		 */
-		print_event(cpu, raw->data, raw->size, timestamp, thread->comm);
+		scripting_ops->process_event(cpu, raw->data, raw->size,
+					     timestamp, thread->comm);
 	}
-	total += period;
+	event__stats.total += period;
 
 	return 0;
 }
 
-static int
-process_event(event_t *event, unsigned long offset, unsigned long head)
+static int sample_type_check(u64 type)
 {
-	trace_event(event);
+	sample_type = type;
 
-	switch (event->header.type) {
-	case PERF_RECORD_MMAP ... PERF_RECORD_LOST:
-		return 0;
-
-	case PERF_RECORD_COMM:
-		return process_comm_event(event, offset, head);
-
-	case PERF_RECORD_EXIT ... PERF_RECORD_READ:
-		return 0;
-
-	case PERF_RECORD_SAMPLE:
-		return process_sample_event(event, offset, head);
-
-	case PERF_RECORD_MAX:
-	default:
+	if (!(sample_type & PERF_SAMPLE_RAW)) {
+		fprintf(stderr,
+			"No trace sample to read. Did you call perf record "
+			"without -R?");
 		return -1;
 	}
 
 	return 0;
 }
 
+static struct perf_file_handler file_handler = {
+	.process_sample_event	= process_sample_event,
+	.process_comm_event	= event__process_comm,
+	.sample_type_check	= sample_type_check,
+};
+
 static int __cmd_trace(void)
 {
-	int ret, rc = EXIT_FAILURE;
-	unsigned long offset = 0;
-	unsigned long head = 0;
-	struct stat perf_stat;
-	event_t *event;
-	uint32_t size;
-	char *buf;
+	register_idle_thread();
+	register_perf_file_handler(&file_handler);
 
-	trace_report();
-	register_idle_thread(&threads, &last_match);
+	return mmap_dispatch_perf_file(&header, input_name,
+				       0, 0, &event__cwdlen, &event__cwd);
+}
 
-	input = open(input_name, O_RDONLY);
-	if (input < 0) {
-		perror("failed to open file");
-		exit(-1);
+struct script_spec {
+	struct list_head	node;
+	struct scripting_ops	*ops;
+	char			spec[0];
+};
+
+LIST_HEAD(script_specs);
+
+static struct script_spec *script_spec__new(const char *spec,
+					    struct scripting_ops *ops)
+{
+	struct script_spec *s = malloc(sizeof(*s) + strlen(spec) + 1);
+
+	if (s != NULL) {
+		strcpy(s->spec, spec);
+		s->ops = ops;
 	}
 
-	ret = fstat(input, &perf_stat);
-	if (ret < 0) {
-		perror("failed to stat file");
-		exit(-1);
+	return s;
+}
+
+static void script_spec__delete(struct script_spec *s)
+{
+	free(s->spec);
+	free(s);
+}
+
+static void script_spec__add(struct script_spec *s)
+{
+	list_add_tail(&s->node, &script_specs);
+}
+
+static struct script_spec *script_spec__find(const char *spec)
+{
+	struct script_spec *s;
+
+	list_for_each_entry(s, &script_specs, node)
+		if (strcasecmp(s->spec, spec) == 0)
+			return s;
+	return NULL;
+}
+
+static struct script_spec *script_spec__findnew(const char *spec,
+						struct scripting_ops *ops)
+{
+	struct script_spec *s = script_spec__find(spec);
+
+	if (s)
+		return s;
+
+	s = script_spec__new(spec, ops);
+	if (!s)
+		goto out_delete_spec;
+
+	script_spec__add(s);
+
+	return s;
+
+out_delete_spec:
+	script_spec__delete(s);
+
+	return NULL;
+}
+
+int script_spec_register(const char *spec, struct scripting_ops *ops)
+{
+	struct script_spec *s;
+
+	s = script_spec__find(spec);
+	if (s)
+		return -1;
+
+	s = script_spec__findnew(spec, ops);
+	if (!s)
+		return -1;
+
+	return 0;
+}
+
+static struct scripting_ops *script_spec__lookup(const char *spec)
+{
+	struct script_spec *s = script_spec__find(spec);
+	if (!s)
+		return NULL;
+
+	return s->ops;
+}
+
+static void list_available_languages(void)
+{
+	struct script_spec *s;
+
+	fprintf(stderr, "\n");
+	fprintf(stderr, "Scripting language extensions (used in "
+		"perf trace -s [spec:]script.[spec]):\n\n");
+
+	list_for_each_entry(s, &script_specs, node)
+		fprintf(stderr, "  %-42s [%s]\n", s->spec, s->ops->name);
+
+	fprintf(stderr, "\n");
+}
+
+static int parse_scriptname(const struct option *opt __used,
+			    const char *str, int unset __used)
+{
+	char spec[PATH_MAX];
+	const char *script, *ext;
+	int len;
+
+	if (strcmp(str, "list") == 0) {
+		list_available_languages();
+		return 0;
 	}
 
-	if (!perf_stat.st_size) {
-		fprintf(stderr, "zero-sized file, nothing to do!\n");
-		exit(0);
-	}
-	header = perf_header__read(input);
-	head = header->data_offset;
-	sample_type = perf_header__sample_type(header);
-
-	if (!(sample_type & PERF_SAMPLE_RAW))
-		die("No trace sample to read. Did you call perf record "
-		    "without -R?");
-
-	if (load_kernel() < 0) {
-		perror("failed to load kernel symbols");
-		return EXIT_FAILURE;
+	script = strchr(str, ':');
+	if (script) {
+		len = script - str;
+		if (len >= PATH_MAX) {
+			fprintf(stderr, "invalid language specifier");
+			return -1;
+		}
+		strncpy(spec, str, len);
+		spec[len] = '\0';
+		scripting_ops = script_spec__lookup(spec);
+		if (!scripting_ops) {
+			fprintf(stderr, "invalid language specifier");
+			return -1;
+		}
+		script++;
+	} else {
+		script = str;
+		ext = strchr(script, '.');
+		if (!ext) {
+			fprintf(stderr, "invalid script extension");
+			return -1;
+		}
+		scripting_ops = script_spec__lookup(++ext);
+		if (!scripting_ops) {
+			fprintf(stderr, "invalid script extension");
+			return -1;
+		}
 	}
 
-remap:
-	buf = (char *)mmap(NULL, page_size * mmap_window, PROT_READ,
-			   MAP_SHARED, input, offset);
-	if (buf == MAP_FAILED) {
-		perror("failed to mmap file");
-		exit(-1);
-	}
+	script_name = strdup(script);
 
-more:
-	event = (event_t *)(buf + head);
-
-	if (head + event->header.size >= page_size * mmap_window) {
-		unsigned long shift = page_size * (head / page_size);
-		int res;
-
-		res = munmap(buf, page_size * mmap_window);
-		assert(res == 0);
-
-		offset += shift;
-		head -= shift;
-		goto remap;
-	}
-
-	size = event->header.size;
-
-	if (!size || process_event(event, offset, head) < 0) {
-
-		/*
-		 * assume we lost track of the stream, check alignment, and
-		 * increment a single u64 in the hope to catch on again 'soon'.
-		 */
-
-		if (unlikely(head & 7))
-			head &= ~7ULL;
-
-		size = 8;
-	}
-
-	head += size;
-
-	if (offset + head < (unsigned long)perf_stat.st_size)
-		goto more;
-
-	rc = EXIT_SUCCESS;
-	close(input);
-
-	return rc;
+	return 0;
 }
 
 static const char * const annotate_usage[] = {
@@ -267,13 +309,24 @@
 		    "dump raw trace in ASCII"),
 	OPT_BOOLEAN('v', "verbose", &verbose,
 		    "be more verbose (show symbol address, etc)"),
+	OPT_BOOLEAN('l', "latency", &latency_format,
+		    "show latency attributes (irqs/preemption disabled, etc)"),
+	OPT_CALLBACK('s', "script", NULL, "name",
+		     "script file name (lang:script name, script name, or *)",
+		     parse_scriptname),
+	OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
+		   "generate perf-trace.xx script in specified language"),
+
 	OPT_END()
 };
 
 int cmd_trace(int argc, const char **argv, const char *prefix __used)
 {
-	symbol__init();
-	page_size = getpagesize();
+	int err;
+
+	symbol__init(0);
+
+	setup_scripting();
 
 	argc = parse_options(argc, argv, options, annotate_usage, 0);
 	if (argc) {
@@ -287,5 +340,50 @@
 
 	setup_pager();
 
-	return __cmd_trace();
+	if (generate_script_lang) {
+		struct stat perf_stat;
+
+		int input = open(input_name, O_RDONLY);
+		if (input < 0) {
+			perror("failed to open file");
+			exit(-1);
+		}
+
+		err = fstat(input, &perf_stat);
+		if (err < 0) {
+			perror("failed to stat file");
+			exit(-1);
+		}
+
+		if (!perf_stat.st_size) {
+			fprintf(stderr, "zero-sized file, nothing to do!\n");
+			exit(0);
+		}
+
+		scripting_ops = script_spec__lookup(generate_script_lang);
+		if (!scripting_ops) {
+			fprintf(stderr, "invalid language specifier");
+			return -1;
+		}
+
+		header = perf_header__new();
+		if (header == NULL)
+			return -1;
+
+		perf_header__read(header, input);
+		err = scripting_ops->generate_script("perf-trace");
+		goto out;
+	}
+
+	if (script_name) {
+		err = scripting_ops->start_script(script_name);
+		if (err)
+			goto out;
+	}
+
+	err = __cmd_trace();
+
+	cleanup_scripting();
+out:
+	return err;
 }
diff --git a/tools/perf/builtin.h b/tools/perf/builtin.h
index e11d8d2..a3d8bf6 100644
--- a/tools/perf/builtin.h
+++ b/tools/perf/builtin.h
@@ -15,6 +15,8 @@
 extern int check_pager_config(const char *cmd);
 
 extern int cmd_annotate(int argc, const char **argv, const char *prefix);
+extern int cmd_bench(int argc, const char **argv, const char *prefix);
+extern int cmd_buildid_list(int argc, const char **argv, const char *prefix);
 extern int cmd_help(int argc, const char **argv, const char *prefix);
 extern int cmd_sched(int argc, const char **argv, const char *prefix);
 extern int cmd_list(int argc, const char **argv, const char *prefix);
@@ -25,5 +27,7 @@
 extern int cmd_top(int argc, const char **argv, const char *prefix);
 extern int cmd_trace(int argc, const char **argv, const char *prefix);
 extern int cmd_version(int argc, const char **argv, const char *prefix);
+extern int cmd_probe(int argc, const char **argv, const char *prefix);
+extern int cmd_kmem(int argc, const char **argv, const char *prefix);
 
 #endif
diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt
index 00326e2..02b09ea 100644
--- a/tools/perf/command-list.txt
+++ b/tools/perf/command-list.txt
@@ -3,6 +3,8 @@
 # command name			category [deprecated] [common]
 #
 perf-annotate			mainporcelain common
+perf-bench			mainporcelain common
+perf-buildid-list		mainporcelain common
 perf-list			mainporcelain common
 perf-sched			mainporcelain common
 perf-record			mainporcelain common
@@ -11,3 +13,5 @@
 perf-timechart			mainporcelain common
 perf-top			mainporcelain common
 perf-trace			mainporcelain common
+perf-probe			mainporcelain common
+perf-kmem			mainporcelain common
diff --git a/tools/perf/design.txt b/tools/perf/design.txt
index fdd42a8..f000c30 100644
--- a/tools/perf/design.txt
+++ b/tools/perf/design.txt
@@ -137,6 +137,8 @@
 	PERF_COUNT_SW_CPU_MIGRATIONS	= 4,
 	PERF_COUNT_SW_PAGE_FAULTS_MIN	= 5,
 	PERF_COUNT_SW_PAGE_FAULTS_MAJ	= 6,
+	PERF_COUNT_SW_ALIGNMENT_FAULTS	= 7,
+	PERF_COUNT_SW_EMULATION_FAULTS	= 8,
 };
 
 Counters of the type PERF_TYPE_TRACEPOINT are available when the ftrace event
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index 19fc7fe..cf64049 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -14,6 +14,7 @@
 #include "util/run-command.h"
 #include "util/parse-events.h"
 #include "util/string.h"
+#include "util/debugfs.h"
 
 const char perf_usage_string[] =
 	"perf [--version] [--help] COMMAND [ARGS]";
@@ -89,8 +90,8 @@
 		/*
 		 * Check remaining flags.
 		 */
-		if (!prefixcmp(cmd, "--exec-path")) {
-			cmd += 11;
+		if (!prefixcmp(cmd, CMD_EXEC_PATH)) {
+			cmd += strlen(CMD_EXEC_PATH);
 			if (*cmd == '=')
 				perf_set_argv_exec_path(cmd + 1);
 			else {
@@ -117,8 +118,8 @@
 			(*argv)++;
 			(*argc)--;
 			handled++;
-		} else if (!prefixcmp(cmd, "--perf-dir=")) {
-			setenv(PERF_DIR_ENVIRONMENT, cmd + 10, 1);
+		} else if (!prefixcmp(cmd, CMD_PERF_DIR)) {
+			setenv(PERF_DIR_ENVIRONMENT, cmd + strlen(CMD_PERF_DIR), 1);
 			if (envchanged)
 				*envchanged = 1;
 		} else if (!strcmp(cmd, "--work-tree")) {
@@ -131,8 +132,8 @@
 				*envchanged = 1;
 			(*argv)++;
 			(*argc)--;
-		} else if (!prefixcmp(cmd, "--work-tree=")) {
-			setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + 12, 1);
+		} else if (!prefixcmp(cmd, CMD_WORK_TREE)) {
+			setenv(PERF_WORK_TREE_ENVIRONMENT, cmd + strlen(CMD_WORK_TREE), 1);
 			if (envchanged)
 				*envchanged = 1;
 		} else if (!strcmp(cmd, "--debugfs-dir")) {
@@ -146,8 +147,8 @@
 				*envchanged = 1;
 			(*argv)++;
 			(*argc)--;
-		} else if (!prefixcmp(cmd, "--debugfs-dir=")) {
-			strncpy(debugfs_mntpt, cmd + 14, MAXPATHLEN);
+		} else if (!prefixcmp(cmd, CMD_DEBUGFS_DIR)) {
+			strncpy(debugfs_mntpt, cmd + strlen(CMD_DEBUGFS_DIR), MAXPATHLEN);
 			debugfs_mntpt[MAXPATHLEN - 1] = '\0';
 			if (envchanged)
 				*envchanged = 1;
@@ -284,17 +285,21 @@
 {
 	const char *cmd = argv[0];
 	static struct cmd_struct commands[] = {
-		{ "help", cmd_help, 0 },
-		{ "list", cmd_list, 0 },
-		{ "record", cmd_record, 0 },
-		{ "report", cmd_report, 0 },
-		{ "stat", cmd_stat, 0 },
-		{ "timechart", cmd_timechart, 0 },
-		{ "top", cmd_top, 0 },
-		{ "annotate", cmd_annotate, 0 },
-		{ "version", cmd_version, 0 },
-		{ "trace", cmd_trace, 0 },
-		{ "sched", cmd_sched, 0 },
+		{ "buildid-list", cmd_buildid_list, 0 },
+		{ "help",	cmd_help,	0 },
+		{ "list",	cmd_list,	0 },
+		{ "record",	cmd_record,	0 },
+		{ "report",	cmd_report,	0 },
+		{ "bench",	cmd_bench,	0 },
+		{ "stat",	cmd_stat,	0 },
+		{ "timechart",	cmd_timechart,	0 },
+		{ "top",	cmd_top,	0 },
+		{ "annotate",	cmd_annotate,	0 },
+		{ "version",	cmd_version,	0 },
+		{ "trace",	cmd_trace,	0 },
+		{ "sched",	cmd_sched,	0 },
+		{ "probe",	cmd_probe,	0 },
+		{ "kmem",	cmd_kmem,	0 },
 	};
 	unsigned int i;
 	static const char ext[] = STRIP_EXTENSION;
@@ -382,45 +387,12 @@
 /* mini /proc/mounts parser: searching for "^blah /mount/point debugfs" */
 static void get_debugfs_mntpt(void)
 {
-	FILE *file;
-	char fs_type[100];
-	char debugfs[MAXPATHLEN];
+	const char *path = debugfs_find_mountpoint();
 
-	/*
-	 * try the standard location
-	 */
-	if (valid_debugfs_mount("/sys/kernel/debug/") == 0) {
-		strcpy(debugfs_mntpt, "/sys/kernel/debug/");
-		return;
-	}
-
-	/*
-	 * try the sane location
-	 */
-	if (valid_debugfs_mount("/debug/") == 0) {
-		strcpy(debugfs_mntpt, "/debug/");
-		return;
-	}
-
-	/*
-	 * give up and parse /proc/mounts
-	 */
-	file = fopen("/proc/mounts", "r");
-	if (file == NULL)
-		return;
-
-	while (fscanf(file, "%*s %"
-		      STR(MAXPATHLEN)
-		      "s %99s %*s %*d %*d\n",
-		      debugfs, fs_type) == 2) {
-		if (strcmp(fs_type, "debugfs") == 0)
-			break;
-	}
-	fclose(file);
-	if (strcmp(fs_type, "debugfs") == 0) {
-		strncpy(debugfs_mntpt, debugfs, MAXPATHLEN);
-		debugfs_mntpt[MAXPATHLEN - 1] = '\0';
-	}
+	if (path)
+		strncpy(debugfs_mntpt, path, sizeof(debugfs_mntpt));
+	else
+		debugfs_mntpt[0] = '\0';
 }
 
 int main(int argc, const char **argv)
diff --git a/tools/perf/perf.h b/tools/perf/perf.h
index 8cc4623..454d5d5 100644
--- a/tools/perf/perf.h
+++ b/tools/perf/perf.h
@@ -47,6 +47,18 @@
 #define cpu_relax()	asm volatile("":::"memory")
 #endif
 
+#ifdef __alpha__
+#include "../../arch/alpha/include/asm/unistd.h"
+#define rmb()		asm volatile("mb" ::: "memory")
+#define cpu_relax()	asm volatile("" ::: "memory")
+#endif
+
+#ifdef __ia64__
+#include "../../arch/ia64/include/asm/unistd.h"
+#define rmb()		asm volatile ("mf" ::: "memory")
+#define cpu_relax()	asm volatile ("hint @pause" ::: "memory")
+#endif
+
 #include <time.h>
 #include <unistd.h>
 #include <sys/types.h>
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/Context.c b/tools/perf/scripts/perl/Perf-Trace-Util/Context.c
new file mode 100644
index 0000000..af78d9a
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/Context.c
@@ -0,0 +1,134 @@
+/*
+ * This file was generated automatically by ExtUtils::ParseXS version 2.18_02 from the
+ * contents of Context.xs. Do not edit this file, edit Context.xs instead.
+ *
+ *	ANY CHANGES MADE HERE WILL BE LOST! 
+ *
+ */
+
+#line 1 "Context.xs"
+/*
+ * Context.xs.  XS interfaces for perf trace.
+ *
+ * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "EXTERN.h"
+#include "perl.h"
+#include "XSUB.h"
+#include "../../../util/trace-event-perl.h"
+
+#ifndef PERL_UNUSED_VAR
+#  define PERL_UNUSED_VAR(var) if (0) var = var
+#endif
+
+#line 41 "Context.c"
+
+XS(XS_Perf__Trace__Context_common_pc); /* prototype to pass -Wmissing-prototypes */
+XS(XS_Perf__Trace__Context_common_pc)
+{
+#ifdef dVAR
+    dVAR; dXSARGS;
+#else
+    dXSARGS;
+#endif
+    if (items != 1)
+       Perl_croak(aTHX_ "Usage: %s(%s)", "Perf::Trace::Context::common_pc", "context");
+    PERL_UNUSED_VAR(cv); /* -W */
+    {
+	struct scripting_context *	context = INT2PTR(struct scripting_context *,SvIV(ST(0)));
+	int	RETVAL;
+	dXSTARG;
+
+	RETVAL = common_pc(context);
+	XSprePUSH; PUSHi((IV)RETVAL);
+    }
+    XSRETURN(1);
+}
+
+
+XS(XS_Perf__Trace__Context_common_flags); /* prototype to pass -Wmissing-prototypes */
+XS(XS_Perf__Trace__Context_common_flags)
+{
+#ifdef dVAR
+    dVAR; dXSARGS;
+#else
+    dXSARGS;
+#endif
+    if (items != 1)
+       Perl_croak(aTHX_ "Usage: %s(%s)", "Perf::Trace::Context::common_flags", "context");
+    PERL_UNUSED_VAR(cv); /* -W */
+    {
+	struct scripting_context *	context = INT2PTR(struct scripting_context *,SvIV(ST(0)));
+	int	RETVAL;
+	dXSTARG;
+
+	RETVAL = common_flags(context);
+	XSprePUSH; PUSHi((IV)RETVAL);
+    }
+    XSRETURN(1);
+}
+
+
+XS(XS_Perf__Trace__Context_common_lock_depth); /* prototype to pass -Wmissing-prototypes */
+XS(XS_Perf__Trace__Context_common_lock_depth)
+{
+#ifdef dVAR
+    dVAR; dXSARGS;
+#else
+    dXSARGS;
+#endif
+    if (items != 1)
+       Perl_croak(aTHX_ "Usage: %s(%s)", "Perf::Trace::Context::common_lock_depth", "context");
+    PERL_UNUSED_VAR(cv); /* -W */
+    {
+	struct scripting_context *	context = INT2PTR(struct scripting_context *,SvIV(ST(0)));
+	int	RETVAL;
+	dXSTARG;
+
+	RETVAL = common_lock_depth(context);
+	XSprePUSH; PUSHi((IV)RETVAL);
+    }
+    XSRETURN(1);
+}
+
+#ifdef __cplusplus
+extern "C"
+#endif
+XS(boot_Perf__Trace__Context); /* prototype to pass -Wmissing-prototypes */
+XS(boot_Perf__Trace__Context)
+{
+#ifdef dVAR
+    dVAR; dXSARGS;
+#else
+    dXSARGS;
+#endif
+    const char* file = __FILE__;
+
+    PERL_UNUSED_VAR(cv); /* -W */
+    PERL_UNUSED_VAR(items); /* -W */
+    XS_VERSION_BOOTCHECK ;
+
+        newXSproto("Perf::Trace::Context::common_pc", XS_Perf__Trace__Context_common_pc, file, "$");
+        newXSproto("Perf::Trace::Context::common_flags", XS_Perf__Trace__Context_common_flags, file, "$");
+        newXSproto("Perf::Trace::Context::common_lock_depth", XS_Perf__Trace__Context_common_lock_depth, file, "$");
+    if (PL_unitcheckav)
+         call_list(PL_scopestack_ix, PL_unitcheckav);
+    XSRETURN_YES;
+}
+
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs b/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs
new file mode 100644
index 0000000..fb78006
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs
@@ -0,0 +1,41 @@
+/*
+ * Context.xs.  XS interfaces for perf trace.
+ *
+ * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include "EXTERN.h"
+#include "perl.h"
+#include "XSUB.h"
+#include "../../../util/trace-event-perl.h"
+
+MODULE = Perf::Trace::Context		PACKAGE = Perf::Trace::Context
+PROTOTYPES: ENABLE
+
+int
+common_pc(context)
+	struct scripting_context * context
+
+int
+common_flags(context)
+	struct scripting_context * context
+
+int
+common_lock_depth(context)
+	struct scripting_context * context
+
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/Makefile.PL b/tools/perf/scripts/perl/Perf-Trace-Util/Makefile.PL
new file mode 100644
index 0000000..decdeb0
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/Makefile.PL
@@ -0,0 +1,17 @@
+use 5.010000;
+use ExtUtils::MakeMaker;
+# See lib/ExtUtils/MakeMaker.pm for details of how to influence
+# the contents of the Makefile that is written.
+WriteMakefile(
+    NAME              => 'Perf::Trace::Context',
+    VERSION_FROM      => 'lib/Perf/Trace/Context.pm', # finds $VERSION
+    PREREQ_PM         => {}, # e.g., Module::Name => 1.1
+    ($] >= 5.005 ?     ## Add these new keywords supported since 5.005
+      (ABSTRACT_FROM  => 'lib/Perf/Trace/Context.pm', # retrieve abstract from module
+       AUTHOR         => 'Tom Zanussi <tzanussi@gmail.com>') : ()),
+    LIBS              => [''], # e.g., '-lm'
+    DEFINE            => '-I ../..', # e.g., '-DHAVE_SOMETHING'
+    INC               => '-I.', # e.g., '-I. -I/usr/include/other'
+	# Un-comment this if you add C files to link with later:
+    OBJECT            => 'Context.o', # link all the C files too
+);
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/README b/tools/perf/scripts/perl/Perf-Trace-Util/README
new file mode 100644
index 0000000..9a97076
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/README
@@ -0,0 +1,59 @@
+Perf-Trace-Util version 0.01
+============================
+
+This module contains utility functions for use with perf trace.
+
+Core.pm and Util.pm are pure Perl modules; Core.pm contains routines
+that the core perf support for Perl calls on and should always be
+'used', while Util.pm contains useful but optional utility functions
+that scripts may want to use.  Context.pm contains the Perl->C
+interface that allows scripts to access data in the embedding perf
+executable; scripts wishing to do that should 'use Context.pm'.
+
+The Perl->C perf interface is completely driven by Context.xs.  If you
+want to add new Perl functions that end up accessing C data in the
+perf executable, you add desciptions of the new functions here.
+scripting_context is a pointer to the perf data in the perf executable
+that you want to access - it's passed as the second parameter,
+$context, to all handler functions.
+
+After you do that:
+
+  perl Makefile.PL   # to create a Makefile for the next step
+  make               # to create Context.c
+
+  edit Context.c to add const to the char* file = __FILE__ line in
+  XS(boot_Perf__Trace__Context) to silence a warning/error.
+
+  You can delete the Makefile, object files and anything else that was
+  generated e.g. blib and shared library, etc, except for of course
+  Context.c
+
+  You should then be able to run the normal perf make as usual.
+
+INSTALLATION
+
+Building perf with perf trace Perl scripting should install this
+module in the right place.
+
+You should make sure libperl and ExtUtils/Embed.pm are installed first
+e.g. apt-get install libperl-dev or yum install perl-ExtUtils-Embed.
+
+DEPENDENCIES
+
+This module requires these other modules and libraries:
+
+  None
+
+COPYRIGHT AND LICENCE
+
+Copyright (C) 2009 by Tom Zanussi <tzanussi@gmail.com>
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself, either Perl version 5.10.0 or,
+at your option, any later version of Perl 5 you may have available.
+
+Alternatively, this software may be distributed under the terms of the
+GNU General Public License ("GPL") version 2 as published by the Free
+Software Foundation.
+
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm
new file mode 100644
index 0000000..6c7f3659
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm
@@ -0,0 +1,55 @@
+package Perf::Trace::Context;
+
+use 5.010000;
+use strict;
+use warnings;
+
+require Exporter;
+
+our @ISA = qw(Exporter);
+
+our %EXPORT_TAGS = ( 'all' => [ qw(
+) ] );
+
+our @EXPORT_OK = ( @{ $EXPORT_TAGS{'all'} } );
+
+our @EXPORT = qw(
+	common_pc common_flags common_lock_depth
+);
+
+our $VERSION = '0.01';
+
+require XSLoader;
+XSLoader::load('Perf::Trace::Context', $VERSION);
+
+1;
+__END__
+=head1 NAME
+
+Perf::Trace::Context - Perl extension for accessing functions in perf.
+
+=head1 SYNOPSIS
+
+  use Perf::Trace::Context;
+
+=head1 SEE ALSO
+
+Perf (trace) documentation
+
+=head1 AUTHOR
+
+Tom Zanussi, E<lt>tzanussi@gmail.com<gt>
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright (C) 2009 by Tom Zanussi
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself, either Perl version 5.10.0 or,
+at your option, any later version of Perl 5 you may have available.
+
+Alternatively, this software may be distributed under the terms of the
+GNU General Public License ("GPL") version 2 as published by the Free
+Software Foundation.
+
+=cut
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm
new file mode 100644
index 0000000..9df376a
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm
@@ -0,0 +1,192 @@
+package Perf::Trace::Core;
+
+use 5.010000;
+use strict;
+use warnings;
+
+require Exporter;
+
+our @ISA = qw(Exporter);
+
+our %EXPORT_TAGS = ( 'all' => [ qw(
+) ] );
+
+our @EXPORT_OK = ( @{ $EXPORT_TAGS{'all'} } );
+
+our @EXPORT = qw(
+define_flag_field define_flag_value flag_str dump_flag_fields
+define_symbolic_field define_symbolic_value symbol_str dump_symbolic_fields
+trace_flag_str
+);
+
+our $VERSION = '0.01';
+
+my %trace_flags = (0x00 => "NONE",
+		   0x01 => "IRQS_OFF",
+		   0x02 => "IRQS_NOSUPPORT",
+		   0x04 => "NEED_RESCHED",
+		   0x08 => "HARDIRQ",
+		   0x10 => "SOFTIRQ");
+
+sub trace_flag_str
+{
+    my ($value) = @_;
+
+    my $string;
+
+    my $print_delim = 0;
+
+    foreach my $idx (sort {$a <=> $b} keys %trace_flags) {
+	if (!$value && !$idx) {
+	    $string .= "NONE";
+	    last;
+	}
+
+	if ($idx && ($value & $idx) == $idx) {
+	    if ($print_delim) {
+		$string .= " | ";
+	    }
+	    $string .= "$trace_flags{$idx}";
+	    $print_delim = 1;
+	    $value &= ~$idx;
+	}
+    }
+
+    return $string;
+}
+
+my %flag_fields;
+my %symbolic_fields;
+
+sub flag_str
+{
+    my ($event_name, $field_name, $value) = @_;
+
+    my $string;
+
+    if ($flag_fields{$event_name}{$field_name}) {
+	my $print_delim = 0;
+	foreach my $idx (sort {$a <=> $b} keys %{$flag_fields{$event_name}{$field_name}{"values"}}) {
+	    if (!$value && !$idx) {
+		$string .= "$flag_fields{$event_name}{$field_name}{'values'}{$idx}";
+		last;
+	    }
+	    if ($idx && ($value & $idx) == $idx) {
+		if ($print_delim && $flag_fields{$event_name}{$field_name}{'delim'}) {
+		    $string .= " $flag_fields{$event_name}{$field_name}{'delim'} ";
+		}
+		$string .= "$flag_fields{$event_name}{$field_name}{'values'}{$idx}";
+		$print_delim = 1;
+		$value &= ~$idx;
+	    }
+	}
+    }
+
+    return $string;
+}
+
+sub define_flag_field
+{
+    my ($event_name, $field_name, $delim) = @_;
+
+    $flag_fields{$event_name}{$field_name}{"delim"} = $delim;
+}
+
+sub define_flag_value
+{
+    my ($event_name, $field_name, $value, $field_str) = @_;
+
+    $flag_fields{$event_name}{$field_name}{"values"}{$value} = $field_str;
+}
+
+sub dump_flag_fields
+{
+    for my $event (keys %flag_fields) {
+	print "event $event:\n";
+	for my $field (keys %{$flag_fields{$event}}) {
+	    print "    field: $field:\n";
+	    print "        delim: $flag_fields{$event}{$field}{'delim'}\n";
+	    foreach my $idx (sort {$a <=> $b} keys %{$flag_fields{$event}{$field}{"values"}}) {
+		print "        value $idx: $flag_fields{$event}{$field}{'values'}{$idx}\n";
+	    }
+	}
+    }
+}
+
+sub symbol_str
+{
+    my ($event_name, $field_name, $value) = @_;
+
+    if ($symbolic_fields{$event_name}{$field_name}) {
+	foreach my $idx (sort {$a <=> $b} keys %{$symbolic_fields{$event_name}{$field_name}{"values"}}) {
+	    if (!$value && !$idx) {
+		return "$symbolic_fields{$event_name}{$field_name}{'values'}{$idx}";
+		last;
+	    }
+	    if ($value == $idx) {
+		return "$symbolic_fields{$event_name}{$field_name}{'values'}{$idx}";
+	    }
+	}
+    }
+
+    return undef;
+}
+
+sub define_symbolic_field
+{
+    my ($event_name, $field_name) = @_;
+
+    # nothing to do, really
+}
+
+sub define_symbolic_value
+{
+    my ($event_name, $field_name, $value, $field_str) = @_;
+
+    $symbolic_fields{$event_name}{$field_name}{"values"}{$value} = $field_str;
+}
+
+sub dump_symbolic_fields
+{
+    for my $event (keys %symbolic_fields) {
+	print "event $event:\n";
+	for my $field (keys %{$symbolic_fields{$event}}) {
+	    print "    field: $field:\n";
+	    foreach my $idx (sort {$a <=> $b} keys %{$symbolic_fields{$event}{$field}{"values"}}) {
+		print "        value $idx: $symbolic_fields{$event}{$field}{'values'}{$idx}\n";
+	    }
+	}
+    }
+}
+
+1;
+__END__
+=head1 NAME
+
+Perf::Trace::Core - Perl extension for perf trace
+
+=head1 SYNOPSIS
+
+  use Perf::Trace::Core
+
+=head1 SEE ALSO
+
+Perf (trace) documentation
+
+=head1 AUTHOR
+
+Tom Zanussi, E<lt>tzanussi@gmail.com<gt>
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright (C) 2009 by Tom Zanussi
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself, either Perl version 5.10.0 or,
+at your option, any later version of Perl 5 you may have available.
+
+Alternatively, this software may be distributed under the terms of the
+GNU General Public License ("GPL") version 2 as published by the Free
+Software Foundation.
+
+=cut
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
new file mode 100644
index 0000000..052f132
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
@@ -0,0 +1,88 @@
+package Perf::Trace::Util;
+
+use 5.010000;
+use strict;
+use warnings;
+
+require Exporter;
+
+our @ISA = qw(Exporter);
+
+our %EXPORT_TAGS = ( 'all' => [ qw(
+) ] );
+
+our @EXPORT_OK = ( @{ $EXPORT_TAGS{'all'} } );
+
+our @EXPORT = qw(
+avg nsecs nsecs_secs nsecs_nsecs nsecs_usecs print_nsecs
+);
+
+our $VERSION = '0.01';
+
+sub avg
+{
+    my ($total, $n) = @_;
+
+    return $total / $n;
+}
+
+my $NSECS_PER_SEC    = 1000000000;
+
+sub nsecs
+{
+    my ($secs, $nsecs) = @_;
+
+    return $secs * $NSECS_PER_SEC + $nsecs;
+}
+
+sub nsecs_secs {
+    my ($nsecs) = @_;
+
+    return $nsecs / $NSECS_PER_SEC;
+}
+
+sub nsecs_nsecs {
+    my ($nsecs) = @_;
+
+    return $nsecs - nsecs_secs($nsecs);
+}
+
+sub nsecs_str {
+    my ($nsecs) = @_;
+
+    my $str = sprintf("%5u.%09u", nsecs_secs($nsecs), nsecs_nsecs($nsecs));
+
+    return $str;
+}
+
+1;
+__END__
+=head1 NAME
+
+Perf::Trace::Util - Perl extension for perf trace
+
+=head1 SYNOPSIS
+
+  use Perf::Trace::Util;
+
+=head1 SEE ALSO
+
+Perf (trace) documentation
+
+=head1 AUTHOR
+
+Tom Zanussi, E<lt>tzanussi@gmail.com<gt>
+
+=head1 COPYRIGHT AND LICENSE
+
+Copyright (C) 2009 by Tom Zanussi
+
+This library is free software; you can redistribute it and/or modify
+it under the same terms as Perl itself, either Perl version 5.10.0 or,
+at your option, any later version of Perl 5 you may have available.
+
+Alternatively, this software may be distributed under the terms of the
+GNU General Public License ("GPL") version 2 as published by the Free
+Software Foundation.
+
+=cut
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/typemap b/tools/perf/scripts/perl/Perf-Trace-Util/typemap
new file mode 100644
index 0000000..8408368
--- /dev/null
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/typemap
@@ -0,0 +1 @@
+struct scripting_context * T_PTR
diff --git a/tools/perf/scripts/perl/bin/check-perf-trace-record b/tools/perf/scripts/perl/bin/check-perf-trace-record
new file mode 100644
index 0000000..c7ec5de
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/check-perf-trace-record
@@ -0,0 +1,7 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e kmem:kmalloc -e irq:softirq_entry
+
+
+
+
+
diff --git a/tools/perf/scripts/perl/bin/check-perf-trace-report b/tools/perf/scripts/perl/bin/check-perf-trace-report
new file mode 100644
index 0000000..89948b0
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/check-perf-trace-report
@@ -0,0 +1,5 @@
+#!/bin/bash
+perf trace -s ~/libexec/perf-core/scripts/perl/check-perf-trace.pl
+
+
+
diff --git a/tools/perf/scripts/perl/bin/rw-by-file-record b/tools/perf/scripts/perl/bin/rw-by-file-record
new file mode 100644
index 0000000..b25056e
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rw-by-file-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e syscalls:sys_enter_read -e syscalls:sys_enter_write
diff --git a/tools/perf/scripts/perl/bin/rw-by-file-report b/tools/perf/scripts/perl/bin/rw-by-file-report
new file mode 100644
index 0000000..f5dcf9c
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rw-by-file-report
@@ -0,0 +1,5 @@
+#!/bin/bash
+perf trace -s ~/libexec/perf-core/scripts/perl/rw-by-file.pl
+
+
+
diff --git a/tools/perf/scripts/perl/bin/rw-by-pid-record b/tools/perf/scripts/perl/bin/rw-by-pid-record
new file mode 100644
index 0000000..8903979
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rw-by-pid-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write
diff --git a/tools/perf/scripts/perl/bin/rw-by-pid-report b/tools/perf/scripts/perl/bin/rw-by-pid-report
new file mode 100644
index 0000000..cea16f7
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/rw-by-pid-report
@@ -0,0 +1,5 @@
+#!/bin/bash
+perf trace -s ~/libexec/perf-core/scripts/perl/rw-by-pid.pl
+
+
+
diff --git a/tools/perf/scripts/perl/bin/wakeup-latency-record b/tools/perf/scripts/perl/bin/wakeup-latency-record
new file mode 100644
index 0000000..6abedda
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/wakeup-latency-record
@@ -0,0 +1,6 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e sched:sched_switch -e sched:sched_wakeup
+
+
+
+
diff --git a/tools/perf/scripts/perl/bin/wakeup-latency-report b/tools/perf/scripts/perl/bin/wakeup-latency-report
new file mode 100644
index 0000000..85769dc
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/wakeup-latency-report
@@ -0,0 +1,5 @@
+#!/bin/bash
+perf trace -s ~/libexec/perf-core/scripts/perl/wakeup-latency.pl
+
+
+
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-record b/tools/perf/scripts/perl/bin/workqueue-stats-record
new file mode 100644
index 0000000..fce6637
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/workqueue-stats-record
@@ -0,0 +1,2 @@
+#!/bin/bash
+perf record -c 1 -f -a -M -R -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-report b/tools/perf/scripts/perl/bin/workqueue-stats-report
new file mode 100644
index 0000000..aa68435
--- /dev/null
+++ b/tools/perf/scripts/perl/bin/workqueue-stats-report
@@ -0,0 +1,6 @@
+#!/bin/bash
+perf trace -s ~/libexec/perf-core/scripts/perl/workqueue-stats.pl
+
+
+
+
diff --git a/tools/perf/scripts/perl/check-perf-trace.pl b/tools/perf/scripts/perl/check-perf-trace.pl
new file mode 100644
index 0000000..4e7dc0a
--- /dev/null
+++ b/tools/perf/scripts/perl/check-perf-trace.pl
@@ -0,0 +1,106 @@
+# perf trace event handlers, generated by perf trace -g perl
+# (c) 2009, Tom Zanussi <tzanussi@gmail.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# This script tests basic functionality such as flag and symbol
+# strings, common_xxx() calls back into perf, begin, end, unhandled
+# events, etc.  Basically, if this script runs successfully and
+# displays expected results, perl scripting support should be ok.
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Context;
+use Perf::Trace::Util;
+
+sub trace_begin
+{
+    print "trace_begin\n";
+}
+
+sub trace_end
+{
+    print "trace_end\n";
+
+    print_unhandled();
+}
+
+sub irq::softirq_entry
+{
+	my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	    $common_pid, $common_comm,
+	    $vec) = @_;
+
+	print_header($event_name, $common_cpu, $common_secs, $common_nsecs,
+		     $common_pid, $common_comm);
+
+	print_uncommon($context);
+
+	printf("vec=%s\n",
+	       symbol_str("irq::softirq_entry", "vec", $vec));
+}
+
+sub kmem::kmalloc
+{
+	my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	    $common_pid, $common_comm,
+	    $call_site, $ptr, $bytes_req, $bytes_alloc,
+	    $gfp_flags) = @_;
+
+	print_header($event_name, $common_cpu, $common_secs, $common_nsecs,
+		     $common_pid, $common_comm);
+
+	print_uncommon($context);
+
+	printf("call_site=%p, ptr=%p, bytes_req=%u, bytes_alloc=%u, ".
+	       "gfp_flags=%s\n",
+	       $call_site, $ptr, $bytes_req, $bytes_alloc,
+
+	       flag_str("kmem::kmalloc", "gfp_flags", $gfp_flags));
+}
+
+# print trace fields not included in handler args
+sub print_uncommon
+{
+    my ($context) = @_;
+
+    printf("common_preempt_count=%d, common_flags=%s, common_lock_depth=%d, ",
+	   common_pc($context), trace_flag_str(common_flags($context)),
+	   common_lock_depth($context));
+
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+    if ((scalar keys %unhandled) == 0) {
+	return;
+    }
+
+    print "\nunhandled events:\n\n";
+
+    printf("%-40s  %10s\n", "event", "count");
+    printf("%-40s  %10s\n", "----------------------------------------",
+	   "-----------");
+
+    foreach my $event_name (keys %unhandled) {
+	printf("%-40s  %10d\n", $event_name, $unhandled{$event_name});
+    }
+}
+
+sub trace_unhandled
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm) = @_;
+
+    $unhandled{$event_name}++;
+}
+
+sub print_header
+{
+	my ($event_name, $cpu, $secs, $nsecs, $pid, $comm) = @_;
+
+	printf("%-20s %5u %05u.%09u %8u %-20s ",
+	       $event_name, $cpu, $secs, $nsecs, $pid, $comm);
+}
diff --git a/tools/perf/scripts/perl/rw-by-file.pl b/tools/perf/scripts/perl/rw-by-file.pl
new file mode 100644
index 0000000..61f9156
--- /dev/null
+++ b/tools/perf/scripts/perl/rw-by-file.pl
@@ -0,0 +1,105 @@
+#!/usr/bin/perl -w
+# (c) 2009, Tom Zanussi <tzanussi@gmail.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# Display r/w activity for files read/written to for a given program
+
+# The common_* event handler fields are the most useful fields common to
+# all events.  They don't necessarily correspond to the 'common_*' fields
+# in the status files.  Those fields not available as handler params can
+# be retrieved via script functions of the form get_common_*().
+
+use 5.010000;
+use strict;
+use warnings;
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Util;
+
+# change this to the comm of the program you're interested in
+my $for_comm = "perf";
+
+my %reads;
+my %writes;
+
+sub syscalls::sys_enter_read
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm, $nr, $fd, $buf, $count) = @_;
+
+    if ($common_comm eq $for_comm) {
+	$reads{$fd}{bytes_requested} += $count;
+	$reads{$fd}{total_reads}++;
+    }
+}
+
+sub syscalls::sys_enter_write
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm, $nr, $fd, $buf, $count) = @_;
+
+    if ($common_comm eq $for_comm) {
+	$writes{$fd}{bytes_written} += $count;
+	$writes{$fd}{total_writes}++;
+    }
+}
+
+sub trace_end
+{
+    printf("file read counts for $for_comm:\n\n");
+
+    printf("%6s  %10s  %10s\n", "fd", "# reads", "bytes_requested");
+    printf("%6s  %10s  %10s\n", "------", "----------", "-----------");
+
+    foreach my $fd (sort {$reads{$b}{bytes_requested} <=>
+			      $reads{$a}{bytes_requested}} keys %reads) {
+	my $total_reads = $reads{$fd}{total_reads};
+	my $bytes_requested = $reads{$fd}{bytes_requested};
+	printf("%6u  %10u  %10u\n", $fd, $total_reads, $bytes_requested);
+    }
+
+    printf("\nfile write counts for $for_comm:\n\n");
+
+    printf("%6s  %10s  %10s\n", "fd", "# writes", "bytes_written");
+    printf("%6s  %10s  %10s\n", "------", "----------", "-----------");
+
+    foreach my $fd (sort {$writes{$b}{bytes_written} <=>
+			      $writes{$a}{bytes_written}} keys %writes) {
+	my $total_writes = $writes{$fd}{total_writes};
+	my $bytes_written = $writes{$fd}{bytes_written};
+	printf("%6u  %10u  %10u\n", $fd, $total_writes, $bytes_written);
+    }
+
+    print_unhandled();
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+    if ((scalar keys %unhandled) == 0) {
+	return;
+    }
+
+    print "\nunhandled events:\n\n";
+
+    printf("%-40s  %10s\n", "event", "count");
+    printf("%-40s  %10s\n", "----------------------------------------",
+	   "-----------");
+
+    foreach my $event_name (keys %unhandled) {
+	printf("%-40s  %10d\n", $event_name, $unhandled{$event_name});
+    }
+}
+
+sub trace_unhandled
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm) = @_;
+
+    $unhandled{$event_name}++;
+}
+
+
diff --git a/tools/perf/scripts/perl/rw-by-pid.pl b/tools/perf/scripts/perl/rw-by-pid.pl
new file mode 100644
index 0000000..da601fa
--- /dev/null
+++ b/tools/perf/scripts/perl/rw-by-pid.pl
@@ -0,0 +1,170 @@
+#!/usr/bin/perl -w
+# (c) 2009, Tom Zanussi <tzanussi@gmail.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# Display r/w activity for all processes
+
+# The common_* event handler fields are the most useful fields common to
+# all events.  They don't necessarily correspond to the 'common_*' fields
+# in the status files.  Those fields not available as handler params can
+# be retrieved via script functions of the form get_common_*().
+
+use 5.010000;
+use strict;
+use warnings;
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Util;
+
+my %reads;
+my %writes;
+
+sub syscalls::sys_exit_read
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$nr, $ret) = @_;
+
+    if ($ret > 0) {
+	$reads{$common_pid}{bytes_read} += $ret;
+    } else {
+	if (!defined ($reads{$common_pid}{bytes_read})) {
+	    $reads{$common_pid}{bytes_read} = 0;
+	}
+	$reads{$common_pid}{errors}{$ret}++;
+    }
+}
+
+sub syscalls::sys_enter_read
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$nr, $fd, $buf, $count) = @_;
+
+    $reads{$common_pid}{bytes_requested} += $count;
+    $reads{$common_pid}{total_reads}++;
+    $reads{$common_pid}{comm} = $common_comm;
+}
+
+sub syscalls::sys_exit_write
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$nr, $ret) = @_;
+
+    if ($ret <= 0) {
+	$writes{$common_pid}{errors}{$ret}++;
+    }
+}
+
+sub syscalls::sys_enter_write
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$nr, $fd, $buf, $count) = @_;
+
+    $writes{$common_pid}{bytes_written} += $count;
+    $writes{$common_pid}{total_writes}++;
+    $writes{$common_pid}{comm} = $common_comm;
+}
+
+sub trace_end
+{
+    printf("read counts by pid:\n\n");
+
+    printf("%6s  %20s  %10s  %10s  %10s\n", "pid", "comm",
+	   "# reads", "bytes_requested", "bytes_read");
+    printf("%6s  %-20s  %10s  %10s  %10s\n", "------", "--------------------",
+	   "-----------", "----------", "----------");
+
+    foreach my $pid (sort {$reads{$b}{bytes_read} <=>
+			       $reads{$a}{bytes_read}} keys %reads) {
+	my $comm = $reads{$pid}{comm};
+	my $total_reads = $reads{$pid}{total_reads};
+	my $bytes_requested = $reads{$pid}{bytes_requested};
+	my $bytes_read = $reads{$pid}{bytes_read};
+
+	printf("%6s  %-20s  %10s  %10s  %10s\n", $pid, $comm,
+	       $total_reads, $bytes_requested, $bytes_read);
+    }
+
+    printf("\nfailed reads by pid:\n\n");
+
+    printf("%6s  %20s  %6s  %10s\n", "pid", "comm", "error #", "# errors");
+    printf("%6s  %20s  %6s  %10s\n", "------", "--------------------",
+	   "------", "----------");
+
+    foreach my $pid (keys %reads) {
+	my $comm = $reads{$pid}{comm};
+	foreach my $err (sort {$reads{$b}{comm} cmp $reads{$a}{comm}}
+			 keys %{$reads{$pid}{errors}}) {
+	    my $errors = $reads{$pid}{errors}{$err};
+
+	    printf("%6d  %-20s  %6d  %10s\n", $pid, $comm, $err, $errors);
+	}
+    }
+
+    printf("\nwrite counts by pid:\n\n");
+
+    printf("%6s  %20s  %10s  %10s\n", "pid", "comm",
+	   "# writes", "bytes_written");
+    printf("%6s  %-20s  %10s  %10s\n", "------", "--------------------",
+	   "-----------", "----------");
+
+    foreach my $pid (sort {$writes{$b}{bytes_written} <=>
+			       $writes{$a}{bytes_written}} keys %writes) {
+	my $comm = $writes{$pid}{comm};
+	my $total_writes = $writes{$pid}{total_writes};
+	my $bytes_written = $writes{$pid}{bytes_written};
+
+	printf("%6s  %-20s  %10s  %10s\n", $pid, $comm,
+	       $total_writes, $bytes_written);
+    }
+
+    printf("\nfailed writes by pid:\n\n");
+
+    printf("%6s  %20s  %6s  %10s\n", "pid", "comm", "error #", "# errors");
+    printf("%6s  %20s  %6s  %10s\n", "------", "--------------------",
+	   "------", "----------");
+
+    foreach my $pid (keys %writes) {
+	my $comm = $writes{$pid}{comm};
+	foreach my $err (sort {$writes{$b}{comm} cmp $writes{$a}{comm}}
+			 keys %{$writes{$pid}{errors}}) {
+	    my $errors = $writes{$pid}{errors}{$err};
+
+	    printf("%6d  %-20s  %6d  %10s\n", $pid, $comm, $err, $errors);
+	}
+    }
+
+    print_unhandled();
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+    if ((scalar keys %unhandled) == 0) {
+	return;
+    }
+
+    print "\nunhandled events:\n\n";
+
+    printf("%-40s  %10s\n", "event", "count");
+    printf("%-40s  %10s\n", "----------------------------------------",
+	   "-----------");
+
+    foreach my $event_name (keys %unhandled) {
+	printf("%-40s  %10d\n", $event_name, $unhandled{$event_name});
+    }
+}
+
+sub trace_unhandled
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm) = @_;
+
+    $unhandled{$event_name}++;
+}
diff --git a/tools/perf/scripts/perl/wakeup-latency.pl b/tools/perf/scripts/perl/wakeup-latency.pl
new file mode 100644
index 0000000..ed58ef2
--- /dev/null
+++ b/tools/perf/scripts/perl/wakeup-latency.pl
@@ -0,0 +1,103 @@
+#!/usr/bin/perl -w
+# (c) 2009, Tom Zanussi <tzanussi@gmail.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# Display avg/min/max wakeup latency
+
+# The common_* event handler fields are the most useful fields common to
+# all events.  They don't necessarily correspond to the 'common_*' fields
+# in the status files.  Those fields not available as handler params can
+# be retrieved via script functions of the form get_common_*().
+
+use 5.010000;
+use strict;
+use warnings;
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Util;
+
+my %last_wakeup;
+
+my $max_wakeup_latency;
+my $min_wakeup_latency;
+my $total_wakeup_latency;
+my $total_wakeups;
+
+sub sched::sched_switch
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$prev_comm, $prev_pid, $prev_prio, $prev_state, $next_comm, $next_pid,
+	$next_prio) = @_;
+
+    my $wakeup_ts = $last_wakeup{$common_cpu}{ts};
+    if ($wakeup_ts) {
+	my $switch_ts = nsecs($common_secs, $common_nsecs);
+	my $wakeup_latency = $switch_ts - $wakeup_ts;
+	if ($wakeup_latency > $max_wakeup_latency) {
+	    $max_wakeup_latency = $wakeup_latency;
+	}
+	if ($wakeup_latency < $min_wakeup_latency) {
+	    $min_wakeup_latency = $wakeup_latency;
+	}
+	$total_wakeup_latency += $wakeup_latency;
+	$total_wakeups++;
+    }
+    $last_wakeup{$common_cpu}{ts} = 0;
+}
+
+sub sched::sched_wakeup
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$comm, $pid, $prio, $success, $target_cpu) = @_;
+
+    $last_wakeup{$target_cpu}{ts} = nsecs($common_secs, $common_nsecs);
+}
+
+sub trace_begin
+{
+    $min_wakeup_latency = 1000000000;
+    $max_wakeup_latency = 0;
+}
+
+sub trace_end
+{
+    printf("wakeup_latency stats:\n\n");
+    print "total_wakeups: $total_wakeups\n";
+    printf("avg_wakeup_latency (ns): %u\n",
+	   avg($total_wakeup_latency, $total_wakeups));
+    printf("min_wakeup_latency (ns): %u\n", $min_wakeup_latency);
+    printf("max_wakeup_latency (ns): %u\n", $max_wakeup_latency);
+
+    print_unhandled();
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+    if ((scalar keys %unhandled) == 0) {
+	return;
+    }
+
+    print "\nunhandled events:\n\n";
+
+    printf("%-40s  %10s\n", "event", "count");
+    printf("%-40s  %10s\n", "----------------------------------------",
+	   "-----------");
+
+    foreach my $event_name (keys %unhandled) {
+	printf("%-40s  %10d\n", $event_name, $unhandled{$event_name});
+    }
+}
+
+sub trace_unhandled
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm) = @_;
+
+    $unhandled{$event_name}++;
+}
diff --git a/tools/perf/scripts/perl/workqueue-stats.pl b/tools/perf/scripts/perl/workqueue-stats.pl
new file mode 100644
index 0000000..511302c
--- /dev/null
+++ b/tools/perf/scripts/perl/workqueue-stats.pl
@@ -0,0 +1,129 @@
+#!/usr/bin/perl -w
+# (c) 2009, Tom Zanussi <tzanussi@gmail.com>
+# Licensed under the terms of the GNU GPL License version 2
+
+# Displays workqueue stats
+#
+# Usage:
+#
+#   perf record -c 1 -f -a -R -e workqueue:workqueue_creation -e
+#     workqueue:workqueue_destruction -e workqueue:workqueue_execution
+#     -e workqueue:workqueue_insertion
+#
+#   perf trace -p -s tools/perf/scripts/perl/workqueue-stats.pl
+
+use 5.010000;
+use strict;
+use warnings;
+
+use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
+use lib "./Perf-Trace-Util/lib";
+use Perf::Trace::Core;
+use Perf::Trace::Util;
+
+my @cpus;
+
+sub workqueue::workqueue_destruction
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$thread_comm, $thread_pid) = @_;
+
+    $cpus[$common_cpu]{$thread_pid}{destroyed}++;
+    $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
+}
+
+sub workqueue::workqueue_creation
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$thread_comm, $thread_pid, $cpu) = @_;
+
+    $cpus[$common_cpu]{$thread_pid}{created}++;
+    $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
+}
+
+sub workqueue::workqueue_execution
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$thread_comm, $thread_pid, $func) = @_;
+
+    $cpus[$common_cpu]{$thread_pid}{executed}++;
+    $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
+}
+
+sub workqueue::workqueue_insertion
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm,
+	$thread_comm, $thread_pid, $func) = @_;
+
+    $cpus[$common_cpu]{$thread_pid}{inserted}++;
+    $cpus[$common_cpu]{$thread_pid}{comm} = $thread_comm;
+}
+
+sub trace_end
+{
+    print "workqueue work stats:\n\n";
+    my $cpu = 0;
+    printf("%3s %6s %6s\t%-20s\n", "cpu", "ins", "exec", "name");
+    printf("%3s %6s %6s\t%-20s\n", "---", "---", "----", "----");
+    foreach my $pidhash (@cpus) {
+	while ((my $pid, my $wqhash) = each %$pidhash) {
+	    my $ins = $$wqhash{'inserted'};
+	    my $exe = $$wqhash{'executed'};
+	    my $comm = $$wqhash{'comm'};
+	    if ($ins || $exe) {
+		printf("%3u %6u %6u\t%-20s\n", $cpu, $ins, $exe, $comm);
+	    }
+	}
+	$cpu++;
+    }
+
+    $cpu = 0;
+    print "\nworkqueue lifecycle stats:\n\n";
+    printf("%3s %6s %6s\t%-20s\n", "cpu", "created", "destroyed", "name");
+    printf("%3s %6s %6s\t%-20s\n", "---", "-------", "---------", "----");
+    foreach my $pidhash (@cpus) {
+	while ((my $pid, my $wqhash) = each %$pidhash) {
+	    my $created = $$wqhash{'created'};
+	    my $destroyed = $$wqhash{'destroyed'};
+	    my $comm = $$wqhash{'comm'};
+	    if ($created || $destroyed) {
+		printf("%3u %6u %6u\t%-20s\n", $cpu, $created, $destroyed,
+		       $comm);
+	    }
+	}
+	$cpu++;
+    }
+
+    print_unhandled();
+}
+
+my %unhandled;
+
+sub print_unhandled
+{
+    if ((scalar keys %unhandled) == 0) {
+	return;
+    }
+
+    print "\nunhandled events:\n\n";
+
+    printf("%-40s  %10s\n", "event", "count");
+    printf("%-40s  %10s\n", "----------------------------------------",
+	   "-----------");
+
+    foreach my $event_name (keys %unhandled) {
+	printf("%-40s  %10d\n", $event_name, $unhandled{$event_name});
+    }
+}
+
+sub trace_unhandled
+{
+    my ($event_name, $context, $common_cpu, $common_secs, $common_nsecs,
+	$common_pid, $common_comm) = @_;
+
+    $unhandled{$event_name}++;
+}
diff --git a/tools/perf/util/cache.h b/tools/perf/util/cache.h
index 6f8ea9d..918eb37 100644
--- a/tools/perf/util/cache.h
+++ b/tools/perf/util/cache.h
@@ -1,10 +1,15 @@
-#ifndef CACHE_H
-#define CACHE_H
+#ifndef __PERF_CACHE_H
+#define __PERF_CACHE_H
 
 #include "util.h"
 #include "strbuf.h"
 #include "../perf.h"
 
+#define CMD_EXEC_PATH "--exec-path"
+#define CMD_PERF_DIR "--perf-dir="
+#define CMD_WORK_TREE "--work-tree="
+#define CMD_DEBUGFS_DIR "--debugfs-dir="
+
 #define PERF_DIR_ENVIRONMENT "PERF_DIR"
 #define PERF_WORK_TREE_ENVIRONMENT "PERF_WORK_TREE"
 #define DEFAULT_PERF_DIR_ENVIRONMENT ".perf"
@@ -117,4 +122,4 @@
 
 extern size_t strlcpy(char *dest, const char *src, size_t size);
 
-#endif /* CACHE_H */
+#endif /* __PERF_CACHE_H */
diff --git a/tools/perf/util/callchain.c b/tools/perf/util/callchain.c
index 3b8380f..b3b7125 100644
--- a/tools/perf/util/callchain.c
+++ b/tools/perf/util/callchain.c
@@ -206,7 +206,7 @@
 	}
 	node->val_nr = chain->nr - start;
 	if (!node->val_nr)
-		printf("Warning: empty node in callchain tree\n");
+		pr_warning("Warning: empty node in callchain tree\n");
 }
 
 static void
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 43cf3ea..ad4626d 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -58,4 +58,4 @@
 int register_callchain_param(struct callchain_param *param);
 void append_chain(struct callchain_node *root, struct ip_callchain *chain,
 		  struct symbol **syms);
-#endif
+#endif	/* __PERF_CALLCHAIN_H */
diff --git a/tools/perf/util/color.h b/tools/perf/util/color.h
index 58d5975..24e8809 100644
--- a/tools/perf/util/color.h
+++ b/tools/perf/util/color.h
@@ -1,5 +1,5 @@
-#ifndef COLOR_H
-#define COLOR_H
+#ifndef __PERF_COLOR_H
+#define __PERF_COLOR_H
 
 /* "\033[1;38;5;2xx;48;5;2xxm\0" is 23 bytes */
 #define COLOR_MAXLEN 24
@@ -39,4 +39,4 @@
 int percent_color_fprintf(FILE *fp, const char *fmt, double percent);
 const char *get_percent_color(double percent);
 
-#endif /* COLOR_H */
+#endif /* __PERF_COLOR_H */
diff --git a/tools/perf/util/ctype.c b/tools/perf/util/ctype.c
index 0b791bd..3507362 100644
--- a/tools/perf/util/ctype.c
+++ b/tools/perf/util/ctype.c
@@ -29,3 +29,11 @@
 	A, A, A, A, A, A, A, A, A, A, A, R, R, P, P, 0,		/* 112..127 */
 	/* Nothing in the 128.. range */
 };
+
+const char *graph_line =
+	"_____________________________________________________________________"
+	"_____________________________________________________________________";
+const char *graph_dotted_line =
+	"---------------------------------------------------------------------"
+	"---------------------------------------------------------------------"
+	"---------------------------------------------------------------------";
diff --git a/tools/perf/util/data_map.c b/tools/perf/util/data_map.c
new file mode 100644
index 0000000..ca0bedf
--- /dev/null
+++ b/tools/perf/util/data_map.c
@@ -0,0 +1,291 @@
+#include "data_map.h"
+#include "symbol.h"
+#include "util.h"
+#include "debug.h"
+
+
+static struct perf_file_handler *curr_handler;
+static unsigned long	mmap_window = 32;
+static char		__cwd[PATH_MAX];
+
+static int process_event_stub(event_t *event __used)
+{
+	dump_printf(": unhandled!\n");
+	return 0;
+}
+
+void register_perf_file_handler(struct perf_file_handler *handler)
+{
+	if (!handler->process_sample_event)
+		handler->process_sample_event = process_event_stub;
+	if (!handler->process_mmap_event)
+		handler->process_mmap_event = process_event_stub;
+	if (!handler->process_comm_event)
+		handler->process_comm_event = process_event_stub;
+	if (!handler->process_fork_event)
+		handler->process_fork_event = process_event_stub;
+	if (!handler->process_exit_event)
+		handler->process_exit_event = process_event_stub;
+	if (!handler->process_lost_event)
+		handler->process_lost_event = process_event_stub;
+	if (!handler->process_read_event)
+		handler->process_read_event = process_event_stub;
+	if (!handler->process_throttle_event)
+		handler->process_throttle_event = process_event_stub;
+	if (!handler->process_unthrottle_event)
+		handler->process_unthrottle_event = process_event_stub;
+
+	curr_handler = handler;
+}
+
+static const char *event__name[] = {
+	[0]			 = "TOTAL",
+	[PERF_RECORD_MMAP]	 = "MMAP",
+	[PERF_RECORD_LOST]	 = "LOST",
+	[PERF_RECORD_COMM]	 = "COMM",
+	[PERF_RECORD_EXIT]	 = "EXIT",
+	[PERF_RECORD_THROTTLE]	 = "THROTTLE",
+	[PERF_RECORD_UNTHROTTLE] = "UNTHROTTLE",
+	[PERF_RECORD_FORK]	 = "FORK",
+	[PERF_RECORD_READ]	 = "READ",
+	[PERF_RECORD_SAMPLE]	 = "SAMPLE",
+};
+
+unsigned long event__total[PERF_RECORD_MAX];
+
+void event__print_totals(void)
+{
+	int i;
+	for (i = 0; i < PERF_RECORD_MAX; ++i)
+		pr_info("%10s events: %10ld\n",
+			event__name[i], event__total[i]);
+}
+
+static int
+process_event(event_t *event, unsigned long offset, unsigned long head)
+{
+	trace_event(event);
+
+	if (event->header.type < PERF_RECORD_MAX) {
+		dump_printf("%p [%p]: PERF_RECORD_%s",
+			    (void *)(offset + head),
+			    (void *)(long)(event->header.size),
+			    event__name[event->header.type]);
+		++event__total[0];
+		++event__total[event->header.type];
+	}
+
+	switch (event->header.type) {
+	case PERF_RECORD_SAMPLE:
+		return curr_handler->process_sample_event(event);
+	case PERF_RECORD_MMAP:
+		return curr_handler->process_mmap_event(event);
+	case PERF_RECORD_COMM:
+		return curr_handler->process_comm_event(event);
+	case PERF_RECORD_FORK:
+		return curr_handler->process_fork_event(event);
+	case PERF_RECORD_EXIT:
+		return curr_handler->process_exit_event(event);
+	case PERF_RECORD_LOST:
+		return curr_handler->process_lost_event(event);
+	case PERF_RECORD_READ:
+		return curr_handler->process_read_event(event);
+	case PERF_RECORD_THROTTLE:
+		return curr_handler->process_throttle_event(event);
+	case PERF_RECORD_UNTHROTTLE:
+		return curr_handler->process_unthrottle_event(event);
+	default:
+		curr_handler->total_unknown++;
+		return -1;
+	}
+}
+
+int perf_header__read_build_ids(int input, off_t offset, off_t size)
+{
+	struct build_id_event bev;
+	char filename[PATH_MAX];
+	off_t limit = offset + size;
+	int err = -1;
+
+	while (offset < limit) {
+		struct dso *dso;
+		ssize_t len;
+
+		if (read(input, &bev, sizeof(bev)) != sizeof(bev))
+			goto out;
+
+		len = bev.header.size - sizeof(bev);
+		if (read(input, filename, len) != len)
+			goto out;
+
+		dso = dsos__findnew(filename);
+		if (dso != NULL)
+			dso__set_build_id(dso, &bev.build_id);
+
+		offset += bev.header.size;
+	}
+	err = 0;
+out:
+	return err;
+}
+
+int mmap_dispatch_perf_file(struct perf_header **pheader,
+			    const char *input_name,
+			    int force,
+			    int full_paths,
+			    int *cwdlen,
+			    char **cwd)
+{
+	int err;
+	struct perf_header *header;
+	unsigned long head, shift;
+	unsigned long offset = 0;
+	struct stat input_stat;
+	size_t	page_size;
+	u64 sample_type;
+	event_t *event;
+	uint32_t size;
+	int input;
+	char *buf;
+
+	if (curr_handler == NULL) {
+		pr_debug("Forgot to register perf file handler\n");
+		return -EINVAL;
+	}
+
+	page_size = getpagesize();
+
+	input = open(input_name, O_RDONLY);
+	if (input < 0) {
+		pr_err("Failed to open file: %s", input_name);
+		if (!strcmp(input_name, "perf.data"))
+			pr_err("  (try 'perf record' first)");
+		pr_err("\n");
+		return -errno;
+	}
+
+	if (fstat(input, &input_stat) < 0) {
+		pr_err("failed to stat file");
+		err = -errno;
+		goto out_close;
+	}
+
+	err = -EACCES;
+	if (!force && input_stat.st_uid && (input_stat.st_uid != geteuid())) {
+		pr_err("file: %s not owned by current user or root\n",
+			input_name);
+		goto out_close;
+	}
+
+	if (input_stat.st_size == 0) {
+		pr_info("zero-sized file, nothing to do!\n");
+		goto done;
+	}
+
+	err = -ENOMEM;
+	header = perf_header__new();
+	if (header == NULL)
+		goto out_close;
+
+	err = perf_header__read(header, input);
+	if (err < 0)
+		goto out_delete;
+	*pheader = header;
+	head = header->data_offset;
+
+	sample_type = perf_header__sample_type(header);
+
+	err = -EINVAL;
+	if (curr_handler->sample_type_check &&
+	    curr_handler->sample_type_check(sample_type) < 0)
+		goto out_delete;
+
+	if (!full_paths) {
+		if (getcwd(__cwd, sizeof(__cwd)) == NULL) {
+			pr_err("failed to get the current directory\n");
+			err = -errno;
+			goto out_delete;
+		}
+		*cwd = __cwd;
+		*cwdlen = strlen(*cwd);
+	} else {
+		*cwd = NULL;
+		*cwdlen = 0;
+	}
+
+	shift = page_size * (head / page_size);
+	offset += shift;
+	head -= shift;
+
+remap:
+	buf = mmap(NULL, page_size * mmap_window, PROT_READ,
+		   MAP_SHARED, input, offset);
+	if (buf == MAP_FAILED) {
+		pr_err("failed to mmap file\n");
+		err = -errno;
+		goto out_delete;
+	}
+
+more:
+	event = (event_t *)(buf + head);
+
+	size = event->header.size;
+	if (!size)
+		size = 8;
+
+	if (head + event->header.size >= page_size * mmap_window) {
+		int munmap_ret;
+
+		shift = page_size * (head / page_size);
+
+		munmap_ret = munmap(buf, page_size * mmap_window);
+		assert(munmap_ret == 0);
+
+		offset += shift;
+		head -= shift;
+		goto remap;
+	}
+
+	size = event->header.size;
+
+	dump_printf("\n%p [%p]: event: %d\n",
+			(void *)(offset + head),
+			(void *)(long)event->header.size,
+			event->header.type);
+
+	if (!size || process_event(event, offset, head) < 0) {
+
+		dump_printf("%p [%p]: skipping unknown header type: %d\n",
+			(void *)(offset + head),
+			(void *)(long)(event->header.size),
+			event->header.type);
+
+		/*
+		 * assume we lost track of the stream, check alignment, and
+		 * increment a single u64 in the hope to catch on again 'soon'.
+		 */
+
+		if (unlikely(head & 7))
+			head &= ~7ULL;
+
+		size = 8;
+	}
+
+	head += size;
+
+	if (offset + head >= header->data_offset + header->data_size)
+		goto done;
+
+	if (offset + head < (unsigned long)input_stat.st_size)
+		goto more;
+
+done:
+	err = 0;
+out_close:
+	close(input);
+
+	return err;
+out_delete:
+	perf_header__delete(header);
+	goto out_close;
+}
diff --git a/tools/perf/util/data_map.h b/tools/perf/util/data_map.h
new file mode 100644
index 0000000..3180ff7
--- /dev/null
+++ b/tools/perf/util/data_map.h
@@ -0,0 +1,32 @@
+#ifndef __PERF_DATAMAP_H
+#define __PERF_DATAMAP_H
+
+#include "event.h"
+#include "header.h"
+
+typedef int (*event_type_handler_t)(event_t *);
+
+struct perf_file_handler {
+	event_type_handler_t	process_sample_event;
+	event_type_handler_t	process_mmap_event;
+	event_type_handler_t	process_comm_event;
+	event_type_handler_t	process_fork_event;
+	event_type_handler_t	process_exit_event;
+	event_type_handler_t	process_lost_event;
+	event_type_handler_t	process_read_event;
+	event_type_handler_t	process_throttle_event;
+	event_type_handler_t	process_unthrottle_event;
+	int			(*sample_type_check)(u64 sample_type);
+	unsigned long		total_unknown;
+};
+
+void register_perf_file_handler(struct perf_file_handler *handler);
+int mmap_dispatch_perf_file(struct perf_header **pheader,
+			    const char *input_name,
+			    int force,
+			    int full_paths,
+			    int *cwdlen,
+			    char **cwd);
+int perf_header__read_build_ids(int input, off_t offset, off_t file_size);
+
+#endif
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index e8ca98f..28d520d 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -13,12 +13,12 @@
 int verbose = 0;
 int dump_trace = 0;
 
-int eprintf(const char *fmt, ...)
+int eprintf(int level, const char *fmt, ...)
 {
 	va_list args;
 	int ret = 0;
 
-	if (verbose) {
+	if (verbose >= level) {
 		va_start(args, fmt);
 		ret = vfprintf(stderr, fmt, args);
 		va_end(args);
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 437eea5..c6c24c5 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -1,8 +1,15 @@
 /* For debugging general purposes */
+#ifndef __PERF_DEBUG_H
+#define __PERF_DEBUG_H
+
+#include "event.h"
 
 extern int verbose;
 extern int dump_trace;
 
-int eprintf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
+int eprintf(int level,
+	    const char *fmt, ...) __attribute__((format(printf, 2, 3)));
 int dump_printf(const char *fmt, ...) __attribute__((format(printf, 1, 2)));
 void trace_event(event_t *event);
+
+#endif	/* __PERF_DEBUG_H */
diff --git a/tools/perf/util/debugfs.c b/tools/perf/util/debugfs.c
new file mode 100644
index 0000000..06b73ee
--- /dev/null
+++ b/tools/perf/util/debugfs.c
@@ -0,0 +1,241 @@
+#include "util.h"
+#include "debugfs.h"
+#include "cache.h"
+
+static int debugfs_premounted;
+static char debugfs_mountpoint[MAX_PATH+1];
+
+static const char *debugfs_known_mountpoints[] = {
+	"/sys/kernel/debug/",
+	"/debug/",
+	0,
+};
+
+/* use this to force a umount */
+void debugfs_force_cleanup(void)
+{
+	debugfs_find_mountpoint();
+	debugfs_premounted = 0;
+	debugfs_umount();
+}
+
+/* construct a full path to a debugfs element */
+int debugfs_make_path(const char *element, char *buffer, int size)
+{
+	int len;
+
+	if (strlen(debugfs_mountpoint) == 0) {
+		buffer[0] = '\0';
+		return -1;
+	}
+
+	len = strlen(debugfs_mountpoint) + strlen(element) + 1;
+	if (len >= size)
+		return len+1;
+
+	snprintf(buffer, size-1, "%s/%s", debugfs_mountpoint, element);
+	return 0;
+}
+
+static int debugfs_found;
+
+/* find the path to the mounted debugfs */
+const char *debugfs_find_mountpoint(void)
+{
+	const char **ptr;
+	char type[100];
+	FILE *fp;
+
+	if (debugfs_found)
+		return (const char *) debugfs_mountpoint;
+
+	ptr = debugfs_known_mountpoints;
+	while (*ptr) {
+		if (debugfs_valid_mountpoint(*ptr) == 0) {
+			debugfs_found = 1;
+			strcpy(debugfs_mountpoint, *ptr);
+			return debugfs_mountpoint;
+		}
+		ptr++;
+	}
+
+	/* give up and parse /proc/mounts */
+	fp = fopen("/proc/mounts", "r");
+	if (fp == NULL)
+		die("Can't open /proc/mounts for read");
+
+	while (fscanf(fp, "%*s %"
+		      STR(MAX_PATH)
+		      "s %99s %*s %*d %*d\n",
+		      debugfs_mountpoint, type) == 2) {
+		if (strcmp(type, "debugfs") == 0)
+			break;
+	}
+	fclose(fp);
+
+	if (strcmp(type, "debugfs") != 0)
+		return NULL;
+
+	debugfs_found = 1;
+
+	return debugfs_mountpoint;
+}
+
+/* verify that a mountpoint is actually a debugfs instance */
+
+int debugfs_valid_mountpoint(const char *debugfs)
+{
+	struct statfs st_fs;
+
+	if (statfs(debugfs, &st_fs) < 0)
+		return -ENOENT;
+	else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
+		return -ENOENT;
+
+	return 0;
+}
+
+
+int debugfs_valid_entry(const char *path)
+{
+	struct stat st;
+
+	if (stat(path, &st))
+		return -errno;
+
+	return 0;
+}
+
+/* mount the debugfs somewhere */
+
+int debugfs_mount(const char *mountpoint)
+{
+	char mountcmd[128];
+
+	/* see if it's already mounted */
+	if (debugfs_find_mountpoint()) {
+		debugfs_premounted = 1;
+		return 0;
+	}
+
+	/* if not mounted and no argument */
+	if (mountpoint == NULL) {
+		/* see if environment variable set */
+		mountpoint = getenv(PERF_DEBUGFS_ENVIRONMENT);
+		/* if no environment variable, use default */
+		if (mountpoint == NULL)
+			mountpoint = "/sys/kernel/debug";
+	}
+
+	/* save the mountpoint */
+	strncpy(debugfs_mountpoint, mountpoint, sizeof(debugfs_mountpoint));
+
+	/* mount it */
+	snprintf(mountcmd, sizeof(mountcmd),
+		 "/bin/mount -t debugfs debugfs %s", mountpoint);
+	return system(mountcmd);
+}
+
+/* umount the debugfs */
+
+int debugfs_umount(void)
+{
+	char umountcmd[128];
+	int ret;
+
+	/* if it was already mounted, leave it */
+	if (debugfs_premounted)
+		return 0;
+
+	/* make sure it's a valid mount point */
+	ret = debugfs_valid_mountpoint(debugfs_mountpoint);
+	if (ret)
+		return ret;
+
+	snprintf(umountcmd, sizeof(umountcmd),
+		 "/bin/umount %s", debugfs_mountpoint);
+	return system(umountcmd);
+}
+
+int debugfs_write(const char *entry, const char *value)
+{
+	char path[MAX_PATH+1];
+	int ret, count;
+	int fd;
+
+	/* construct the path */
+	snprintf(path, sizeof(path), "%s/%s", debugfs_mountpoint, entry);
+
+	/* verify that it exists */
+	ret = debugfs_valid_entry(path);
+	if (ret)
+		return ret;
+
+	/* get how many chars we're going to write */
+	count = strlen(value);
+
+	/* open the debugfs entry */
+	fd = open(path, O_RDWR);
+	if (fd < 0)
+		return -errno;
+
+	while (count > 0) {
+		/* write it */
+		ret = write(fd, value, count);
+		if (ret <= 0) {
+			if (ret == EAGAIN)
+				continue;
+			close(fd);
+			return -errno;
+		}
+		count -= ret;
+	}
+
+	/* close it */
+	close(fd);
+
+	/* return success */
+	return 0;
+}
+
+/*
+ * read a debugfs entry
+ * returns the number of chars read or a negative errno
+ */
+int debugfs_read(const char *entry, char *buffer, size_t size)
+{
+	char path[MAX_PATH+1];
+	int ret;
+	int fd;
+
+	/* construct the path */
+	snprintf(path, sizeof(path), "%s/%s", debugfs_mountpoint, entry);
+
+	/* verify that it exists */
+	ret = debugfs_valid_entry(path);
+	if (ret)
+		return ret;
+
+	/* open the debugfs entry */
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		return -errno;
+
+	do {
+		/* read it */
+		ret = read(fd, buffer, size);
+		if (ret == 0) {
+			close(fd);
+			return EOF;
+		}
+	} while (ret < 0 && errno == EAGAIN);
+
+	/* close it */
+	close(fd);
+
+	/* make *sure* there's a null character at the end */
+	buffer[ret] = '\0';
+
+	/* return the number of chars read */
+	return ret;
+}
diff --git a/tools/perf/util/debugfs.h b/tools/perf/util/debugfs.h
new file mode 100644
index 0000000..3cd14f9
--- /dev/null
+++ b/tools/perf/util/debugfs.h
@@ -0,0 +1,25 @@
+#ifndef __DEBUGFS_H__
+#define __DEBUGFS_H__
+
+#include <sys/mount.h>
+
+#ifndef MAX_PATH
+# define MAX_PATH 256
+#endif
+
+#ifndef STR
+# define _STR(x) #x
+# define STR(x) _STR(x)
+#endif
+
+extern const char *debugfs_find_mountpoint(void);
+extern int debugfs_valid_mountpoint(const char *debugfs);
+extern int debugfs_valid_entry(const char *path);
+extern int debugfs_mount(const char *mountpoint);
+extern int debugfs_umount(void);
+extern int debugfs_write(const char *entry, const char *value);
+extern int debugfs_read(const char *entry, char *buffer, size_t size);
+extern void debugfs_force_cleanup(void);
+extern int debugfs_make_path(const char *element, char *buffer, int size);
+
+#endif /* __DEBUGFS_H__ */
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
new file mode 100644
index 0000000..414b89d
--- /dev/null
+++ b/tools/perf/util/event.c
@@ -0,0 +1,312 @@
+#include <linux/types.h>
+#include "event.h"
+#include "debug.h"
+#include "string.h"
+#include "thread.h"
+
+static pid_t event__synthesize_comm(pid_t pid, int full,
+				    int (*process)(event_t *event))
+{
+	event_t ev;
+	char filename[PATH_MAX];
+	char bf[BUFSIZ];
+	FILE *fp;
+	size_t size = 0;
+	DIR *tasks;
+	struct dirent dirent, *next;
+	pid_t tgid = 0;
+
+	snprintf(filename, sizeof(filename), "/proc/%d/status", pid);
+
+	fp = fopen(filename, "r");
+	if (fp == NULL) {
+out_race:
+		/*
+		 * We raced with a task exiting - just return:
+		 */
+		pr_debug("couldn't open %s\n", filename);
+		return 0;
+	}
+
+	memset(&ev.comm, 0, sizeof(ev.comm));
+	while (!ev.comm.comm[0] || !ev.comm.pid) {
+		if (fgets(bf, sizeof(bf), fp) == NULL)
+			goto out_failure;
+
+		if (memcmp(bf, "Name:", 5) == 0) {
+			char *name = bf + 5;
+			while (*name && isspace(*name))
+				++name;
+			size = strlen(name) - 1;
+			memcpy(ev.comm.comm, name, size++);
+		} else if (memcmp(bf, "Tgid:", 5) == 0) {
+			char *tgids = bf + 5;
+			while (*tgids && isspace(*tgids))
+				++tgids;
+			tgid = ev.comm.pid = atoi(tgids);
+		}
+	}
+
+	ev.comm.header.type = PERF_RECORD_COMM;
+	size = ALIGN(size, sizeof(u64));
+	ev.comm.header.size = sizeof(ev.comm) - (sizeof(ev.comm.comm) - size);
+
+	if (!full) {
+		ev.comm.tid = pid;
+
+		process(&ev);
+		goto out_fclose;
+	}
+
+	snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
+
+	tasks = opendir(filename);
+	if (tasks == NULL)
+		goto out_race;
+
+	while (!readdir_r(tasks, &dirent, &next) && next) {
+		char *end;
+		pid = strtol(dirent.d_name, &end, 10);
+		if (*end)
+			continue;
+
+		ev.comm.tid = pid;
+
+		process(&ev);
+	}
+	closedir(tasks);
+
+out_fclose:
+	fclose(fp);
+	return tgid;
+
+out_failure:
+	pr_warning("couldn't get COMM and pgid, malformed %s\n", filename);
+	return -1;
+}
+
+static int event__synthesize_mmap_events(pid_t pid, pid_t tgid,
+					 int (*process)(event_t *event))
+{
+	char filename[PATH_MAX];
+	FILE *fp;
+
+	snprintf(filename, sizeof(filename), "/proc/%d/maps", pid);
+
+	fp = fopen(filename, "r");
+	if (fp == NULL) {
+		/*
+		 * We raced with a task exiting - just return:
+		 */
+		pr_debug("couldn't open %s\n", filename);
+		return -1;
+	}
+
+	while (1) {
+		char bf[BUFSIZ], *pbf = bf;
+		event_t ev = {
+			.header = { .type = PERF_RECORD_MMAP },
+		};
+		int n;
+		size_t size;
+		if (fgets(bf, sizeof(bf), fp) == NULL)
+			break;
+
+		/* 00400000-0040c000 r-xp 00000000 fd:01 41038  /bin/cat */
+		n = hex2u64(pbf, &ev.mmap.start);
+		if (n < 0)
+			continue;
+		pbf += n + 1;
+		n = hex2u64(pbf, &ev.mmap.len);
+		if (n < 0)
+			continue;
+		pbf += n + 3;
+		if (*pbf == 'x') { /* vm_exec */
+			char *execname = strchr(bf, '/');
+
+			/* Catch VDSO */
+			if (execname == NULL)
+				execname = strstr(bf, "[vdso]");
+
+			if (execname == NULL)
+				continue;
+
+			size = strlen(execname);
+			execname[size - 1] = '\0'; /* Remove \n */
+			memcpy(ev.mmap.filename, execname, size);
+			size = ALIGN(size, sizeof(u64));
+			ev.mmap.len -= ev.mmap.start;
+			ev.mmap.header.size = (sizeof(ev.mmap) -
+					       (sizeof(ev.mmap.filename) - size));
+			ev.mmap.pid = tgid;
+			ev.mmap.tid = pid;
+
+			process(&ev);
+		}
+	}
+
+	fclose(fp);
+	return 0;
+}
+
+int event__synthesize_thread(pid_t pid, int (*process)(event_t *event))
+{
+	pid_t tgid = event__synthesize_comm(pid, 1, process);
+	if (tgid == -1)
+		return -1;
+	return event__synthesize_mmap_events(pid, tgid, process);
+}
+
+void event__synthesize_threads(int (*process)(event_t *event))
+{
+	DIR *proc;
+	struct dirent dirent, *next;
+
+	proc = opendir("/proc");
+
+	while (!readdir_r(proc, &dirent, &next) && next) {
+		char *end;
+		pid_t pid = strtol(dirent.d_name, &end, 10);
+
+		if (*end) /* only interested in proper numerical dirents */
+			continue;
+
+		event__synthesize_thread(pid, process);
+	}
+
+	closedir(proc);
+}
+
+char *event__cwd;
+int  event__cwdlen;
+
+struct events_stats event__stats;
+
+int event__process_comm(event_t *self)
+{
+	struct thread *thread = threads__findnew(self->comm.pid);
+
+	dump_printf(": %s:%d\n", self->comm.comm, self->comm.pid);
+
+	if (thread == NULL || thread__set_comm(thread, self->comm.comm)) {
+		dump_printf("problem processing PERF_RECORD_COMM, skipping event.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+int event__process_lost(event_t *self)
+{
+	dump_printf(": id:%Ld: lost:%Ld\n", self->lost.id, self->lost.lost);
+	event__stats.lost += self->lost.lost;
+	return 0;
+}
+
+int event__process_mmap(event_t *self)
+{
+	struct thread *thread = threads__findnew(self->mmap.pid);
+	struct map *map = map__new(&self->mmap, MAP__FUNCTION,
+				   event__cwd, event__cwdlen);
+
+	dump_printf(" %d/%d: [%p(%p) @ %p]: %s\n",
+		    self->mmap.pid, self->mmap.tid,
+		    (void *)(long)self->mmap.start,
+		    (void *)(long)self->mmap.len,
+		    (void *)(long)self->mmap.pgoff,
+		    self->mmap.filename);
+
+	if (thread == NULL || map == NULL)
+		dump_printf("problem processing PERF_RECORD_MMAP, skipping event.\n");
+	else
+		thread__insert_map(thread, map);
+
+	return 0;
+}
+
+int event__process_task(event_t *self)
+{
+	struct thread *thread = threads__findnew(self->fork.pid);
+	struct thread *parent = threads__findnew(self->fork.ppid);
+
+	dump_printf("(%d:%d):(%d:%d)\n", self->fork.pid, self->fork.tid,
+		    self->fork.ppid, self->fork.ptid);
+	/*
+	 * A thread clone will have the same PID for both parent and child.
+	 */
+	if (thread == parent)
+		return 0;
+
+	if (self->header.type == PERF_RECORD_EXIT)
+		return 0;
+
+	if (thread == NULL || parent == NULL ||
+	    thread__fork(thread, parent) < 0) {
+		dump_printf("problem processing PERF_RECORD_FORK, skipping event.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+void thread__find_addr_location(struct thread *self, u8 cpumode,
+				enum map_type type, u64 addr,
+				struct addr_location *al,
+				symbol_filter_t filter)
+{
+	struct thread *thread = al->thread = self;
+
+	al->addr = addr;
+
+	if (cpumode & PERF_RECORD_MISC_KERNEL) {
+		al->level = 'k';
+		thread = kthread;
+	} else if (cpumode & PERF_RECORD_MISC_USER)
+		al->level = '.';
+	else {
+		al->level = 'H';
+		al->map = NULL;
+		al->sym = NULL;
+		return;
+	}
+try_again:
+	al->map = thread__find_map(thread, type, al->addr);
+	if (al->map == NULL) {
+		/*
+		 * If this is outside of all known maps, and is a negative
+		 * address, try to look it up in the kernel dso, as it might be
+		 * a vsyscall or vdso (which executes in user-mode).
+		 *
+		 * XXX This is nasty, we should have a symbol list in the
+		 * "[vdso]" dso, but for now lets use the old trick of looking
+		 * in the whole kernel symbol list.
+		 */
+		if ((long long)al->addr < 0 && thread != kthread) {
+			thread = kthread;
+			goto try_again;
+		}
+		al->sym = NULL;
+	} else {
+		al->addr = al->map->map_ip(al->map, al->addr);
+		al->sym = map__find_symbol(al->map, al->addr, filter);
+	}
+}
+
+int event__preprocess_sample(const event_t *self, struct addr_location *al,
+			     symbol_filter_t filter)
+{
+	u8 cpumode = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
+	struct thread *thread = threads__findnew(self->ip.pid);
+
+	if (thread == NULL)
+		return -1;
+
+	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
+
+	thread__find_addr_location(thread, cpumode, MAP__FUNCTION,
+				   self->ip.ip, al, filter);
+	dump_printf(" ...... dso: %s\n",
+		    al->map ? al->map->dso->long_name :
+			al->level == 'H' ? "[hypervisor]" : "<not found>");
+	return 0;
+}
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 2c9c26d6..a4cc810 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -1,14 +1,10 @@
 #ifndef __PERF_RECORD_H
 #define __PERF_RECORD_H
+
 #include "../perf.h"
 #include "util.h"
 #include <linux/list.h>
-
-enum {
-	SHOW_KERNEL	= 1,
-	SHOW_USER	= 2,
-	SHOW_HV		= 4,
-};
+#include <linux/rbtree.h>
 
 /*
  * PERF_SAMPLE_IP | PERF_SAMPLE_TID | *
@@ -65,6 +61,13 @@
 	u64 array[];
 };
 
+#define BUILD_ID_SIZE 20
+
+struct build_id_event {
+	struct perf_event_header header;
+	u8			 build_id[ALIGN(BUILD_ID_SIZE, sizeof(u64))];
+	char			 filename[];
+};
 
 typedef union event_union {
 	struct perf_event_header	header;
@@ -77,12 +80,30 @@
 	struct sample_event		sample;
 } event_t;
 
+struct events_stats {
+	unsigned long total;
+	unsigned long lost;
+};
+
+void event__print_totals(void);
+
+enum map_type {
+	MAP__FUNCTION = 0,
+
+	MAP__NR_TYPES,
+};
+
 struct map {
-	struct list_head	node;
+	union {
+		struct rb_node	rb_node;
+		struct list_head node;
+	};
 	u64			start;
 	u64			end;
+	enum map_type		type;
 	u64			pgoff;
 	u64			(*map_ip)(struct map *, u64);
+	u64			(*unmap_ip)(struct map *, u64);
 	struct dso		*dso;
 };
 
@@ -91,14 +112,48 @@
 	return ip - map->start + map->pgoff;
 }
 
-static inline u64 vdso__map_ip(struct map *map __used, u64 ip)
+static inline u64 map__unmap_ip(struct map *map, u64 ip)
+{
+	return ip + map->start - map->pgoff;
+}
+
+static inline u64 identity__map_ip(struct map *map __used, u64 ip)
 {
 	return ip;
 }
 
-struct map *map__new(struct mmap_event *event, char *cwd, int cwdlen);
+struct symbol;
+
+typedef int (*symbol_filter_t)(struct map *map, struct symbol *sym);
+
+void map__init(struct map *self, enum map_type type,
+	       u64 start, u64 end, u64 pgoff, struct dso *dso);
+struct map *map__new(struct mmap_event *event, enum map_type,
+		     char *cwd, int cwdlen);
+void map__delete(struct map *self);
 struct map *map__clone(struct map *self);
 int map__overlap(struct map *l, struct map *r);
 size_t map__fprintf(struct map *self, FILE *fp);
+struct symbol *map__find_symbol(struct map *self, u64 addr,
+				symbol_filter_t filter);
+void map__fixup_start(struct map *self);
+void map__fixup_end(struct map *self);
 
-#endif
+int event__synthesize_thread(pid_t pid, int (*process)(event_t *event));
+void event__synthesize_threads(int (*process)(event_t *event));
+
+extern char *event__cwd;
+extern int  event__cwdlen;
+extern struct events_stats event__stats;
+extern unsigned long event__total[PERF_RECORD_MAX];
+
+int event__process_comm(event_t *self);
+int event__process_lost(event_t *self);
+int event__process_mmap(event_t *self);
+int event__process_task(event_t *self);
+
+struct addr_location;
+int event__preprocess_sample(const event_t *self, struct addr_location *al,
+			     symbol_filter_t filter);
+
+#endif /* __PERF_RECORD_H */
diff --git a/tools/perf/util/exec_cmd.h b/tools/perf/util/exec_cmd.h
index effe25e..31647ac 100644
--- a/tools/perf/util/exec_cmd.h
+++ b/tools/perf/util/exec_cmd.h
@@ -1,5 +1,5 @@
-#ifndef PERF_EXEC_CMD_H
-#define PERF_EXEC_CMD_H
+#ifndef __PERF_EXEC_CMD_H
+#define __PERF_EXEC_CMD_H
 
 extern void perf_set_argv_exec_path(const char *exec_path);
 extern const char *perf_extract_argv0_path(const char *path);
@@ -10,4 +10,4 @@
 extern int execl_perf_cmd(const char *cmd, ...);
 extern const char *system_path(const char *path);
 
-#endif /* PERF_EXEC_CMD_H */
+#endif /* __PERF_EXEC_CMD_H */
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index e306857..4805e6d 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -2,9 +2,15 @@
 #include <unistd.h>
 #include <stdio.h>
 #include <stdlib.h>
+#include <linux/list.h>
 
 #include "util.h"
 #include "header.h"
+#include "../perf.h"
+#include "trace-event.h"
+#include "symbol.h"
+#include "data_map.h"
+#include "debug.h"
 
 /*
  * Create new perf.data header attribute:
@@ -13,32 +19,43 @@
 {
 	struct perf_header_attr *self = malloc(sizeof(*self));
 
-	if (!self)
-		die("nomem");
-
-	self->attr = *attr;
-	self->ids = 0;
-	self->size = 1;
-	self->id = malloc(sizeof(u64));
-
-	if (!self->id)
-		die("nomem");
+	if (self != NULL) {
+		self->attr = *attr;
+		self->ids  = 0;
+		self->size = 1;
+		self->id   = malloc(sizeof(u64));
+		if (self->id == NULL) {
+			free(self);
+			self = NULL;
+		}
+	}
 
 	return self;
 }
 
-void perf_header_attr__add_id(struct perf_header_attr *self, u64 id)
+void perf_header_attr__delete(struct perf_header_attr *self)
+{
+	free(self->id);
+	free(self);
+}
+
+int perf_header_attr__add_id(struct perf_header_attr *self, u64 id)
 {
 	int pos = self->ids;
 
 	self->ids++;
 	if (self->ids > self->size) {
-		self->size *= 2;
-		self->id = realloc(self->id, self->size * sizeof(u64));
-		if (!self->id)
-			die("nomem");
+		int nsize = self->size * 2;
+		u64 *nid = realloc(self->id, nsize * sizeof(u64));
+
+		if (nid == NULL)
+			return -1;
+
+		self->size = nsize;
+		self->id = nid;
 	}
 	self->id[pos] = id;
+	return 0;
 }
 
 /*
@@ -46,42 +63,52 @@
  */
 struct perf_header *perf_header__new(void)
 {
-	struct perf_header *self = malloc(sizeof(*self));
+	struct perf_header *self = zalloc(sizeof(*self));
 
-	if (!self)
-		die("nomem");
+	if (self != NULL) {
+		self->size = 1;
+		self->attr = malloc(sizeof(void *));
 
-	self->frozen = 0;
-
-	self->attrs = 0;
-	self->size = 1;
-	self->attr = malloc(sizeof(void *));
-
-	if (!self->attr)
-		die("nomem");
-
-	self->data_offset = 0;
-	self->data_size = 0;
+		if (self->attr == NULL) {
+			free(self);
+			self = NULL;
+		}
+	}
 
 	return self;
 }
 
-void perf_header__add_attr(struct perf_header *self,
-			   struct perf_header_attr *attr)
+void perf_header__delete(struct perf_header *self)
 {
-	int pos = self->attrs;
+	int i;
 
+	for (i = 0; i < self->attrs; ++i)
+		perf_header_attr__delete(self->attr[i]);
+
+	free(self->attr);
+	free(self);
+}
+
+int perf_header__add_attr(struct perf_header *self,
+			  struct perf_header_attr *attr)
+{
 	if (self->frozen)
-		die("frozen");
+		return -1;
 
-	self->attrs++;
-	if (self->attrs > self->size) {
-		self->size *= 2;
-		self->attr = realloc(self->attr, self->size * sizeof(void *));
-		if (!self->attr)
-			die("nomem");
+	if (self->attrs == self->size) {
+		int nsize = self->size * 2;
+		struct perf_header_attr **nattr;
+
+		nattr = realloc(self->attr, nsize * sizeof(void *));
+		if (nattr == NULL)
+			return -1;
+
+		self->size = nsize;
+		self->attr = nattr;
 	}
-	self->attr[pos] = attr;
+
+	self->attr[self->attrs++] = attr;
+	return 0;
 }
 
 #define MAX_EVENT_NAME 64
@@ -97,7 +124,7 @@
 void perf_header__push_event(u64 id, const char *name)
 {
 	if (strlen(name) > MAX_EVENT_NAME)
-		printf("Event %s will be truncated\n", name);
+		pr_warning("Event %s will be truncated\n", name);
 
 	if (!events) {
 		events = malloc(sizeof(struct perf_trace_event_type));
@@ -128,44 +155,137 @@
 
 #define PERF_MAGIC	(*(u64 *)__perf_magic)
 
-struct perf_file_section {
-	u64 offset;
-	u64 size;
-};
-
 struct perf_file_attr {
 	struct perf_event_attr	attr;
 	struct perf_file_section	ids;
 };
 
-struct perf_file_header {
-	u64				magic;
-	u64				size;
-	u64				attr_size;
-	struct perf_file_section	attrs;
-	struct perf_file_section	data;
-	struct perf_file_section	event_types;
-};
+void perf_header__set_feat(struct perf_header *self, int feat)
+{
+	set_bit(feat, self->adds_features);
+}
 
-static void do_write(int fd, void *buf, size_t size)
+bool perf_header__has_feat(const struct perf_header *self, int feat)
+{
+	return test_bit(feat, self->adds_features);
+}
+
+static int do_write(int fd, const void *buf, size_t size)
 {
 	while (size) {
 		int ret = write(fd, buf, size);
 
 		if (ret < 0)
-			die("failed to write");
+			return -errno;
 
 		size -= ret;
 		buf += ret;
 	}
+
+	return 0;
 }
 
-void perf_header__write(struct perf_header *self, int fd)
+static int __dsos__write_buildid_table(struct list_head *head, int fd)
+{
+	struct dso *pos;
+
+	list_for_each_entry(pos, head, node) {
+		int err;
+		struct build_id_event b;
+		size_t len;
+
+		if (!pos->has_build_id)
+			continue;
+		len = pos->long_name_len + 1;
+		len = ALIGN(len, 64);
+		memset(&b, 0, sizeof(b));
+		memcpy(&b.build_id, pos->build_id, sizeof(pos->build_id));
+		b.header.size = sizeof(b) + len;
+		err = do_write(fd, &b, sizeof(b));
+		if (err < 0)
+			return err;
+		err = do_write(fd, pos->long_name, len);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int dsos__write_buildid_table(int fd)
+{
+	int err = __dsos__write_buildid_table(&dsos__kernel, fd);
+	if (err == 0)
+		err = __dsos__write_buildid_table(&dsos__user, fd);
+	return err;
+}
+
+static int perf_header__adds_write(struct perf_header *self, int fd)
+{
+	int nr_sections;
+	struct perf_file_section *feat_sec;
+	int sec_size;
+	u64 sec_start;
+	int idx = 0, err;
+
+	if (dsos__read_build_ids())
+		perf_header__set_feat(self, HEADER_BUILD_ID);
+
+	nr_sections = bitmap_weight(self->adds_features, HEADER_FEAT_BITS);
+	if (!nr_sections)
+		return 0;
+
+	feat_sec = calloc(sizeof(*feat_sec), nr_sections);
+	if (feat_sec == NULL)
+		return -ENOMEM;
+
+	sec_size = sizeof(*feat_sec) * nr_sections;
+
+	sec_start = self->data_offset + self->data_size;
+	lseek(fd, sec_start + sec_size, SEEK_SET);
+
+	if (perf_header__has_feat(self, HEADER_TRACE_INFO)) {
+		struct perf_file_section *trace_sec;
+
+		trace_sec = &feat_sec[idx++];
+
+		/* Write trace info */
+		trace_sec->offset = lseek(fd, 0, SEEK_CUR);
+		read_tracing_data(fd, attrs, nr_counters);
+		trace_sec->size = lseek(fd, 0, SEEK_CUR) - trace_sec->offset;
+	}
+
+
+	if (perf_header__has_feat(self, HEADER_BUILD_ID)) {
+		struct perf_file_section *buildid_sec;
+
+		buildid_sec = &feat_sec[idx++];
+
+		/* Write build-ids */
+		buildid_sec->offset = lseek(fd, 0, SEEK_CUR);
+		err = dsos__write_buildid_table(fd);
+		if (err < 0) {
+			pr_debug("failed to write buildid table\n");
+			goto out_free;
+		}
+		buildid_sec->size = lseek(fd, 0, SEEK_CUR) - buildid_sec->offset;
+	}
+
+	lseek(fd, sec_start, SEEK_SET);
+	err = do_write(fd, feat_sec, sec_size);
+	if (err < 0)
+		pr_debug("failed to write feature section\n");
+out_free:
+	free(feat_sec);
+	return err;
+}
+
+int perf_header__write(struct perf_header *self, int fd, bool at_exit)
 {
 	struct perf_file_header f_header;
 	struct perf_file_attr   f_attr;
 	struct perf_header_attr	*attr;
-	int i;
+	int i, err;
 
 	lseek(fd, sizeof(f_header), SEEK_SET);
 
@@ -174,7 +294,11 @@
 		attr = self->attr[i];
 
 		attr->id_offset = lseek(fd, 0, SEEK_CUR);
-		do_write(fd, attr->id, attr->ids * sizeof(u64));
+		err = do_write(fd, attr->id, attr->ids * sizeof(u64));
+		if (err < 0) {
+			pr_debug("failed to write perf header\n");
+			return err;
+		}
 	}
 
 
@@ -190,17 +314,31 @@
 				.size   = attr->ids * sizeof(u64),
 			}
 		};
-		do_write(fd, &f_attr, sizeof(f_attr));
+		err = do_write(fd, &f_attr, sizeof(f_attr));
+		if (err < 0) {
+			pr_debug("failed to write perf header attribute\n");
+			return err;
+		}
 	}
 
 	self->event_offset = lseek(fd, 0, SEEK_CUR);
 	self->event_size = event_count * sizeof(struct perf_trace_event_type);
-	if (events)
-		do_write(fd, events, self->event_size);
-
+	if (events) {
+		err = do_write(fd, events, self->event_size);
+		if (err < 0) {
+			pr_debug("failed to write perf header events\n");
+			return err;
+		}
+	}
 
 	self->data_offset = lseek(fd, 0, SEEK_CUR);
 
+	if (at_exit) {
+		err = perf_header__adds_write(self, fd);
+		if (err < 0)
+			return err;
+	}
+
 	f_header = (struct perf_file_header){
 		.magic	   = PERF_MAGIC,
 		.size	   = sizeof(f_header),
@@ -219,11 +357,18 @@
 		},
 	};
 
+	memcpy(&f_header.adds_features, &self->adds_features, sizeof(self->adds_features));
+
 	lseek(fd, 0, SEEK_SET);
-	do_write(fd, &f_header, sizeof(f_header));
+	err = do_write(fd, &f_header, sizeof(f_header));
+	if (err < 0) {
+		pr_debug("failed to write perf header\n");
+		return err;
+	}
 	lseek(fd, self->data_offset + self->data_size, SEEK_SET);
 
 	self->frozen = 1;
+	return 0;
 }
 
 static void do_read(int fd, void *buf, size_t size)
@@ -241,22 +386,109 @@
 	}
 }
 
-struct perf_header *perf_header__read(int fd)
+int perf_header__process_sections(struct perf_header *self, int fd,
+				  int (*process)(struct perf_file_section *self,
+						 int feat, int fd))
 {
-	struct perf_header	*self = perf_header__new();
+	struct perf_file_section *feat_sec;
+	int nr_sections;
+	int sec_size;
+	int idx = 0;
+	int err = 0, feat = 1;
+
+	nr_sections = bitmap_weight(self->adds_features, HEADER_FEAT_BITS);
+	if (!nr_sections)
+		return 0;
+
+	feat_sec = calloc(sizeof(*feat_sec), nr_sections);
+	if (!feat_sec)
+		return -1;
+
+	sec_size = sizeof(*feat_sec) * nr_sections;
+
+	lseek(fd, self->data_offset + self->data_size, SEEK_SET);
+
+	do_read(fd, feat_sec, sec_size);
+
+	while (idx < nr_sections && feat < HEADER_LAST_FEATURE) {
+		if (perf_header__has_feat(self, feat)) {
+			struct perf_file_section *sec = &feat_sec[idx++];
+
+			err = process(sec, feat, fd);
+			if (err < 0)
+				break;
+		}
+		++feat;
+	}
+
+	free(feat_sec);
+	return err;
+};
+
+int perf_file_header__read(struct perf_file_header *self,
+			   struct perf_header *ph, int fd)
+{
+	lseek(fd, 0, SEEK_SET);
+	do_read(fd, self, sizeof(*self));
+
+	if (self->magic     != PERF_MAGIC ||
+	    self->attr_size != sizeof(struct perf_file_attr))
+		return -1;
+
+	if (self->size != sizeof(*self)) {
+		/* Support the previous format */
+		if (self->size == offsetof(typeof(*self), adds_features))
+			bitmap_zero(self->adds_features, HEADER_FEAT_BITS);
+		else
+			return -1;
+	}
+
+	memcpy(&ph->adds_features, &self->adds_features,
+	       sizeof(self->adds_features));
+
+	ph->event_offset = self->event_types.offset;
+	ph->event_size	 = self->event_types.size;
+	ph->data_offset	 = self->data.offset;
+	ph->data_size	 = self->data.size;
+	return 0;
+}
+
+static int perf_file_section__process(struct perf_file_section *self,
+				      int feat, int fd)
+{
+	if (lseek(fd, self->offset, SEEK_SET) < 0) {
+		pr_debug("Failed to lseek to %Ld offset for feature %d, "
+			 "continuing...\n", self->offset, feat);
+		return 0;
+	}
+
+	switch (feat) {
+	case HEADER_TRACE_INFO:
+		trace_report(fd);
+		break;
+
+	case HEADER_BUILD_ID:
+		if (perf_header__read_build_ids(fd, self->offset, self->size))
+			pr_debug("Failed to read buildids, continuing...\n");
+		break;
+	default:
+		pr_debug("unknown feature %d, continuing...\n", feat);
+	}
+
+	return 0;
+}
+
+int perf_header__read(struct perf_header *self, int fd)
+{
 	struct perf_file_header f_header;
 	struct perf_file_attr	f_attr;
 	u64			f_id;
-
 	int nr_attrs, nr_ids, i, j;
 
-	lseek(fd, 0, SEEK_SET);
-	do_read(fd, &f_header, sizeof(f_header));
-
-	if (f_header.magic	!= PERF_MAGIC		||
-	    f_header.size	!= sizeof(f_header)	||
-	    f_header.attr_size	!= sizeof(f_attr))
-		die("incompatible file format");
+	if (perf_file_header__read(&f_header, self, fd) < 0) {
+		pr_debug("incompatible file format\n");
+		return -EINVAL;
+	}
 
 	nr_attrs = f_header.attrs.size / sizeof(f_attr);
 	lseek(fd, f_header.attrs.offset, SEEK_SET);
@@ -269,6 +501,8 @@
 		tmp = lseek(fd, 0, SEEK_CUR);
 
 		attr = perf_header_attr__new(&f_attr.attr);
+		if (attr == NULL)
+			 return -ENOMEM;
 
 		nr_ids = f_attr.ids.size / sizeof(u64);
 		lseek(fd, f_attr.ids.offset, SEEK_SET);
@@ -276,31 +510,34 @@
 		for (j = 0; j < nr_ids; j++) {
 			do_read(fd, &f_id, sizeof(f_id));
 
-			perf_header_attr__add_id(attr, f_id);
+			if (perf_header_attr__add_id(attr, f_id) < 0) {
+				perf_header_attr__delete(attr);
+				return -ENOMEM;
+			}
 		}
-		perf_header__add_attr(self, attr);
+		if (perf_header__add_attr(self, attr) < 0) {
+			perf_header_attr__delete(attr);
+			return -ENOMEM;
+		}
+
 		lseek(fd, tmp, SEEK_SET);
 	}
 
 	if (f_header.event_types.size) {
 		lseek(fd, f_header.event_types.offset, SEEK_SET);
 		events = malloc(f_header.event_types.size);
-		if (!events)
-			die("nomem");
+		if (events == NULL)
+			return -ENOMEM;
 		do_read(fd, events, f_header.event_types.size);
 		event_count =  f_header.event_types.size / sizeof(struct perf_trace_event_type);
 	}
-	self->event_offset = f_header.event_types.offset;
-	self->event_size   = f_header.event_types.size;
 
-	self->data_offset = f_header.data.offset;
-	self->data_size   = f_header.data.size;
+	perf_header__process_sections(self, fd, perf_file_section__process);
 
 	lseek(fd, self->data_offset, SEEK_SET);
 
 	self->frozen = 1;
-
-	return self;
+	return 0;
 }
 
 u64 perf_header__sample_type(struct perf_header *header)
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index a0761bc..d1dbe2b 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -1,10 +1,13 @@
-#ifndef _PERF_HEADER_H
-#define _PERF_HEADER_H
+#ifndef __PERF_HEADER_H
+#define __PERF_HEADER_H
 
 #include "../../../include/linux/perf_event.h"
 #include <sys/types.h>
+#include <stdbool.h>
 #include "types.h"
 
+#include <linux/bitmap.h>
+
 struct perf_header_attr {
 	struct perf_event_attr attr;
 	int ids, size;
@@ -12,36 +15,71 @@
 	off_t id_offset;
 };
 
-struct perf_header {
-	int frozen;
-	int attrs, size;
-	struct perf_header_attr **attr;
-	s64 attr_offset;
-	u64 data_offset;
-	u64 data_size;
-	u64 event_offset;
-	u64 event_size;
+enum {
+	HEADER_TRACE_INFO = 1,
+	HEADER_BUILD_ID,
+	HEADER_LAST_FEATURE,
 };
 
-struct perf_header *perf_header__read(int fd);
-void perf_header__write(struct perf_header *self, int fd);
+#define HEADER_FEAT_BITS			256
 
-void perf_header__add_attr(struct perf_header *self,
-			   struct perf_header_attr *attr);
+struct perf_file_section {
+	u64 offset;
+	u64 size;
+};
+
+struct perf_file_header {
+	u64				magic;
+	u64				size;
+	u64				attr_size;
+	struct perf_file_section	attrs;
+	struct perf_file_section	data;
+	struct perf_file_section	event_types;
+	DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
+};
+
+struct perf_header;
+
+int perf_file_header__read(struct perf_file_header *self,
+			   struct perf_header *ph, int fd);
+
+struct perf_header {
+	int			frozen;
+	int			attrs, size;
+	struct perf_header_attr **attr;
+	s64			attr_offset;
+	u64			data_offset;
+	u64			data_size;
+	u64			event_offset;
+	u64			event_size;
+	DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
+};
+
+struct perf_header *perf_header__new(void);
+void perf_header__delete(struct perf_header *self);
+
+int perf_header__read(struct perf_header *self, int fd);
+int perf_header__write(struct perf_header *self, int fd, bool at_exit);
+
+int perf_header__add_attr(struct perf_header *self,
+			  struct perf_header_attr *attr);
 
 void perf_header__push_event(u64 id, const char *name);
 char *perf_header__find_event(u64 id);
 
+struct perf_header_attr *perf_header_attr__new(struct perf_event_attr *attr);
+void perf_header_attr__delete(struct perf_header_attr *self);
 
-struct perf_header_attr *
-perf_header_attr__new(struct perf_event_attr *attr);
-void perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
+int perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
 
 u64 perf_header__sample_type(struct perf_header *header);
 struct perf_event_attr *
 perf_header__find_attr(u64 id, struct perf_header *header);
+void perf_header__set_feat(struct perf_header *self, int feat);
+bool perf_header__has_feat(const struct perf_header *self, int feat);
 
+int perf_header__process_sections(struct perf_header *self, int fd,
+				  int (*process)(struct perf_file_section *self,
+						 int feat, int fd));
 
-struct perf_header *perf_header__new(void);
-
-#endif /* _PERF_HEADER_H */
+#endif /* __PERF_HEADER_H */
diff --git a/tools/perf/util/help.h b/tools/perf/util/help.h
index 7128783..7f5c6de 100644
--- a/tools/perf/util/help.h
+++ b/tools/perf/util/help.h
@@ -1,5 +1,5 @@
-#ifndef HELP_H
-#define HELP_H
+#ifndef __PERF_HELP_H
+#define __PERF_HELP_H
 
 struct cmdnames {
 	size_t alloc;
@@ -26,4 +26,4 @@
 void list_commands(const char *title, struct cmdnames *main_cmds,
 		   struct cmdnames *other_cmds);
 
-#endif /* HELP_H */
+#endif /* __PERF_HELP_H */
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
new file mode 100644
index 0000000..0ebf6ee
--- /dev/null
+++ b/tools/perf/util/hist.c
@@ -0,0 +1,202 @@
+#include "hist.h"
+
+struct rb_root hist;
+struct rb_root collapse_hists;
+struct rb_root output_hists;
+int callchain;
+
+struct callchain_param	callchain_param = {
+	.mode	= CHAIN_GRAPH_REL,
+	.min_percent = 0.5
+};
+
+/*
+ * histogram, sorted on item, collects counts
+ */
+
+struct hist_entry *__hist_entry__add(struct addr_location *al,
+				     struct symbol *sym_parent,
+				     u64 count, bool *hit)
+{
+	struct rb_node **p = &hist.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *he;
+	struct hist_entry entry = {
+		.thread	= al->thread,
+		.map	= al->map,
+		.sym	= al->sym,
+		.ip	= al->addr,
+		.level	= al->level,
+		.count	= count,
+		.parent = sym_parent,
+	};
+	int cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		he = rb_entry(parent, struct hist_entry, rb_node);
+
+		cmp = hist_entry__cmp(&entry, he);
+
+		if (!cmp) {
+			*hit = true;
+			return he;
+		}
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	he = malloc(sizeof(*he));
+	if (!he)
+		return NULL;
+	*he = entry;
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &hist);
+	*hit = false;
+	return he;
+}
+
+int64_t
+hist_entry__cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct sort_entry *se;
+	int64_t cmp = 0;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		cmp = se->cmp(left, right);
+		if (cmp)
+			break;
+	}
+
+	return cmp;
+}
+
+int64_t
+hist_entry__collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	struct sort_entry *se;
+	int64_t cmp = 0;
+
+	list_for_each_entry(se, &hist_entry__sort_list, list) {
+		int64_t (*f)(struct hist_entry *, struct hist_entry *);
+
+		f = se->collapse ?: se->cmp;
+
+		cmp = f(left, right);
+		if (cmp)
+			break;
+	}
+
+	return cmp;
+}
+
+void hist_entry__free(struct hist_entry *he)
+{
+	free(he);
+}
+
+/*
+ * collapse the histogram
+ */
+
+void collapse__insert_entry(struct hist_entry *he)
+{
+	struct rb_node **p = &collapse_hists.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *iter;
+	int64_t cmp;
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct hist_entry, rb_node);
+
+		cmp = hist_entry__collapse(iter, he);
+
+		if (!cmp) {
+			iter->count += he->count;
+			hist_entry__free(he);
+			return;
+		}
+
+		if (cmp < 0)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &collapse_hists);
+}
+
+void collapse__resort(void)
+{
+	struct rb_node *next;
+	struct hist_entry *n;
+
+	if (!sort__need_collapse)
+		return;
+
+	next = rb_first(&hist);
+	while (next) {
+		n = rb_entry(next, struct hist_entry, rb_node);
+		next = rb_next(&n->rb_node);
+
+		rb_erase(&n->rb_node, &hist);
+		collapse__insert_entry(n);
+	}
+}
+
+/*
+ * reverse the map, sort on count.
+ */
+
+void output__insert_entry(struct hist_entry *he, u64 min_callchain_hits)
+{
+	struct rb_node **p = &output_hists.rb_node;
+	struct rb_node *parent = NULL;
+	struct hist_entry *iter;
+
+	if (callchain)
+		callchain_param.sort(&he->sorted_chain, &he->callchain,
+				      min_callchain_hits, &callchain_param);
+
+	while (*p != NULL) {
+		parent = *p;
+		iter = rb_entry(parent, struct hist_entry, rb_node);
+
+		if (he->count > iter->count)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+
+	rb_link_node(&he->rb_node, parent, p);
+	rb_insert_color(&he->rb_node, &output_hists);
+}
+
+void output__resort(u64 total_samples)
+{
+	struct rb_node *next;
+	struct hist_entry *n;
+	struct rb_root *tree = &hist;
+	u64 min_callchain_hits;
+
+	min_callchain_hits =
+		total_samples * (callchain_param.min_percent / 100);
+
+	if (sort__need_collapse)
+		tree = &collapse_hists;
+
+	next = rb_first(tree);
+
+	while (next) {
+		n = rb_entry(next, struct hist_entry, rb_node);
+		next = rb_next(&n->rb_node);
+
+		rb_erase(&n->rb_node, tree);
+		output__insert_entry(n, min_callchain_hits);
+	}
+}
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
new file mode 100644
index 0000000..3020db0
--- /dev/null
+++ b/tools/perf/util/hist.h
@@ -0,0 +1,50 @@
+#ifndef __PERF_HIST_H
+#define __PERF_HIST_H
+#include "../builtin.h"
+
+#include "util.h"
+
+#include "color.h"
+#include <linux/list.h>
+#include "cache.h"
+#include <linux/rbtree.h>
+#include "symbol.h"
+#include "string.h"
+#include "callchain.h"
+#include "strlist.h"
+#include "values.h"
+
+#include "../perf.h"
+#include "debug.h"
+#include "header.h"
+
+#include "parse-options.h"
+#include "parse-events.h"
+
+#include "thread.h"
+#include "sort.h"
+
+extern struct rb_root hist;
+extern struct rb_root collapse_hists;
+extern struct rb_root output_hists;
+extern int callchain;
+extern struct callchain_param callchain_param;
+extern unsigned long total;
+extern unsigned long total_mmap;
+extern unsigned long total_comm;
+extern unsigned long total_fork;
+extern unsigned long total_unknown;
+extern unsigned long total_lost;
+
+struct hist_entry *__hist_entry__add(struct addr_location *al,
+				     struct symbol *parent,
+				     u64 count, bool *hit);
+extern int64_t hist_entry__cmp(struct hist_entry *, struct hist_entry *);
+extern int64_t hist_entry__collapse(struct hist_entry *, struct hist_entry *);
+extern void hist_entry__free(struct hist_entry *);
+extern void collapse__insert_entry(struct hist_entry *);
+extern void collapse__resort(void);
+extern void output__insert_entry(struct hist_entry *, u64);
+extern void output__resort(u64);
+
+#endif	/* __PERF_HIST_H */
diff --git a/tools/perf/util/include/asm/asm-offsets.h b/tools/perf/util/include/asm/asm-offsets.h
new file mode 100644
index 0000000..ed53894
--- /dev/null
+++ b/tools/perf/util/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+/* stub */
diff --git a/tools/perf/util/include/asm/bitops.h b/tools/perf/util/include/asm/bitops.h
new file mode 100644
index 0000000..58e9817
--- /dev/null
+++ b/tools/perf/util/include/asm/bitops.h
@@ -0,0 +1,18 @@
+#ifndef _PERF_ASM_BITOPS_H_
+#define _PERF_ASM_BITOPS_H_
+
+#include <sys/types.h>
+#include "../../types.h"
+#include <linux/compiler.h>
+
+/* CHECKME: Not sure both always match */
+#define BITS_PER_LONG	__WORDSIZE
+
+#include "../../../../include/asm-generic/bitops/__fls.h"
+#include "../../../../include/asm-generic/bitops/fls.h"
+#include "../../../../include/asm-generic/bitops/fls64.h"
+#include "../../../../include/asm-generic/bitops/__ffs.h"
+#include "../../../../include/asm-generic/bitops/ffz.h"
+#include "../../../../include/asm-generic/bitops/hweight.h"
+
+#endif
diff --git a/tools/perf/util/include/asm/bug.h b/tools/perf/util/include/asm/bug.h
new file mode 100644
index 0000000..7fcc681
--- /dev/null
+++ b/tools/perf/util/include/asm/bug.h
@@ -0,0 +1,22 @@
+#ifndef _PERF_ASM_GENERIC_BUG_H
+#define _PERF_ASM_GENERIC_BUG_H
+
+#define __WARN_printf(arg...)	do { fprintf(stderr, arg); } while (0)
+
+#define WARN(condition, format...) ({		\
+	int __ret_warn_on = !!(condition);	\
+	if (unlikely(__ret_warn_on))		\
+		__WARN_printf(format);		\
+	unlikely(__ret_warn_on);		\
+})
+
+#define WARN_ONCE(condition, format...)	({	\
+	static int __warned;			\
+	int __ret_warn_once = !!(condition);	\
+						\
+	if (unlikely(__ret_warn_once))		\
+		if (WARN(!__warned, format)) 	\
+			__warned = 1;		\
+	unlikely(__ret_warn_once);		\
+})
+#endif
diff --git a/tools/perf/util/include/asm/byteorder.h b/tools/perf/util/include/asm/byteorder.h
new file mode 100644
index 0000000..b722abe
--- /dev/null
+++ b/tools/perf/util/include/asm/byteorder.h
@@ -0,0 +1,2 @@
+#include <asm/types.h>
+#include "../../../../include/linux/swab.h"
diff --git a/tools/perf/util/include/asm/swab.h b/tools/perf/util/include/asm/swab.h
new file mode 100644
index 0000000..ed53894
--- /dev/null
+++ b/tools/perf/util/include/asm/swab.h
@@ -0,0 +1 @@
+/* stub */
diff --git a/tools/perf/util/include/asm/uaccess.h b/tools/perf/util/include/asm/uaccess.h
new file mode 100644
index 0000000..d0f72b8
--- /dev/null
+++ b/tools/perf/util/include/asm/uaccess.h
@@ -0,0 +1,14 @@
+#ifndef _PERF_ASM_UACCESS_H_
+#define _PERF_ASM_UACCESS_H_
+
+#define __get_user(src, dest)						\
+({									\
+	(src) = *dest;							\
+	0;								\
+})
+
+#define get_user	__get_user
+
+#define access_ok(type, addr, size)	1
+
+#endif
diff --git a/tools/perf/util/include/linux/bitmap.h b/tools/perf/util/include/linux/bitmap.h
new file mode 100644
index 0000000..9450763
--- /dev/null
+++ b/tools/perf/util/include/linux/bitmap.h
@@ -0,0 +1,3 @@
+#include "../../../../include/linux/bitmap.h"
+#include "../../../../include/asm-generic/bitops/find.h"
+#include <linux/errno.h>
diff --git a/tools/perf/util/include/linux/bitops.h b/tools/perf/util/include/linux/bitops.h
new file mode 100644
index 0000000..8d63116
--- /dev/null
+++ b/tools/perf/util/include/linux/bitops.h
@@ -0,0 +1,29 @@
+#ifndef _PERF_LINUX_BITOPS_H_
+#define _PERF_LINUX_BITOPS_H_
+
+#define __KERNEL__
+
+#define CONFIG_GENERIC_FIND_NEXT_BIT
+#define CONFIG_GENERIC_FIND_FIRST_BIT
+#include "../../../../include/linux/bitops.h"
+
+#undef __KERNEL__
+
+static inline void set_bit(int nr, unsigned long *addr)
+{
+	addr[nr / BITS_PER_LONG] |= 1UL << (nr % BITS_PER_LONG);
+}
+
+static __always_inline int test_bit(unsigned int nr, const unsigned long *addr)
+{
+	return ((1UL << (nr % BITS_PER_LONG)) &
+		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
+}
+
+unsigned long generic_find_next_zero_le_bit(const unsigned long *addr, unsigned
+		long size, unsigned long offset);
+
+unsigned long generic_find_next_le_bit(const unsigned long *addr, unsigned
+		long size, unsigned long offset);
+
+#endif
diff --git a/tools/perf/util/include/linux/compiler.h b/tools/perf/util/include/linux/compiler.h
new file mode 100644
index 0000000..dfb0713
--- /dev/null
+++ b/tools/perf/util/include/linux/compiler.h
@@ -0,0 +1,10 @@
+#ifndef _PERF_LINUX_COMPILER_H_
+#define _PERF_LINUX_COMPILER_H_
+
+#ifndef __always_inline
+#define __always_inline	inline
+#endif
+#define __user
+#define __attribute_const__
+
+#endif
diff --git a/tools/perf/util/include/linux/ctype.h b/tools/perf/util/include/linux/ctype.h
new file mode 100644
index 0000000..a53d4ee
--- /dev/null
+++ b/tools/perf/util/include/linux/ctype.h
@@ -0,0 +1 @@
+#include "../util.h"
diff --git a/tools/perf/util/include/linux/kernel.h b/tools/perf/util/include/linux/kernel.h
index a6b8739..21c0274 100644
--- a/tools/perf/util/include/linux/kernel.h
+++ b/tools/perf/util/include/linux/kernel.h
@@ -1,6 +1,16 @@
 #ifndef PERF_LINUX_KERNEL_H_
 #define PERF_LINUX_KERNEL_H_
 
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+
+#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
+
+#define ALIGN(x,a)		__ALIGN_MASK(x,(typeof(x))(a)-1)
+#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
+
 #ifndef offsetof
 #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
 #endif
@@ -26,4 +36,70 @@
 	_max1 > _max2 ? _max1 : _max2; })
 #endif
 
+#ifndef min
+#define min(x, y) ({				\
+	typeof(x) _min1 = (x);			\
+	typeof(y) _min2 = (y);			\
+	(void) (&_min1 == &_min2);		\
+	_min1 < _min2 ? _min1 : _min2; })
+#endif
+
+#ifndef BUG_ON
+#define BUG_ON(cond) assert(!(cond))
+#endif
+
+/*
+ * Both need more care to handle endianness
+ * (Don't use bitmap_copy_le() for now)
+ */
+#define cpu_to_le64(x)	(x)
+#define cpu_to_le32(x)	(x)
+
+static inline int
+vscnprintf(char *buf, size_t size, const char *fmt, va_list args)
+{
+	int i;
+	ssize_t ssize = size;
+
+	i = vsnprintf(buf, size, fmt, args);
+
+	return (i >= ssize) ? (ssize - 1) : i;
+}
+
+static inline int scnprintf(char * buf, size_t size, const char * fmt, ...)
+{
+	va_list args;
+	ssize_t ssize = size;
+	int i;
+
+	va_start(args, fmt);
+	i = vsnprintf(buf, size, fmt, args);
+	va_end(args);
+
+	return (i >= ssize) ? (ssize - 1) : i;
+}
+
+static inline unsigned long
+simple_strtoul(const char *nptr, char **endptr, int base)
+{
+	return strtoul(nptr, endptr, base);
+}
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_err(fmt, ...) \
+	do { fprintf(stderr, pr_fmt(fmt), ##__VA_ARGS__); } while (0)
+#define pr_warning(fmt, ...) \
+	do { fprintf(stderr, pr_fmt(fmt), ##__VA_ARGS__); } while (0)
+#define pr_info(fmt, ...) \
+	do { fprintf(stderr, pr_fmt(fmt), ##__VA_ARGS__); } while (0)
+#define pr_debug(fmt, ...) \
+	eprintf(1, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_debugN(n, fmt, ...) \
+	eprintf(n, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_debug2(fmt, ...) pr_debugN(2, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_debug3(fmt, ...) pr_debugN(3, pr_fmt(fmt), ##__VA_ARGS__)
+
 #endif
diff --git a/tools/perf/util/include/linux/string.h b/tools/perf/util/include/linux/string.h
new file mode 100644
index 0000000..3b2f590
--- /dev/null
+++ b/tools/perf/util/include/linux/string.h
@@ -0,0 +1 @@
+#include <string.h>
diff --git a/tools/perf/util/include/linux/types.h b/tools/perf/util/include/linux/types.h
new file mode 100644
index 0000000..196862a
--- /dev/null
+++ b/tools/perf/util/include/linux/types.h
@@ -0,0 +1,9 @@
+#ifndef _PERF_LINUX_TYPES_H_
+#define _PERF_LINUX_TYPES_H_
+
+#include <asm/types.h>
+
+#define DECLARE_BITMAP(name,bits) \
+	unsigned long name[BITS_TO_LONGS(bits)]
+
+#endif
diff --git a/tools/perf/util/levenshtein.h b/tools/perf/util/levenshtein.h
index 0173abe..b0fcb6d 100644
--- a/tools/perf/util/levenshtein.h
+++ b/tools/perf/util/levenshtein.h
@@ -1,8 +1,8 @@
-#ifndef LEVENSHTEIN_H
-#define LEVENSHTEIN_H
+#ifndef __PERF_LEVENSHTEIN_H
+#define __PERF_LEVENSHTEIN_H
 
 int levenshtein(const char *string1, const char *string2,
 	int swap_penalty, int substition_penalty,
 	int insertion_penalty, int deletion_penalty);
 
-#endif
+#endif /* __PERF_LEVENSHTEIN_H */
diff --git a/tools/perf/util/map.c b/tools/perf/util/map.c
index 804e023..69f94fe 100644
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -3,6 +3,7 @@
 #include <stdlib.h>
 #include <string.h>
 #include <stdio.h>
+#include "debug.h"
 
 static inline int is_anon_memory(const char *filename)
 {
@@ -19,13 +20,28 @@
 	return n;
 }
 
- struct map *map__new(struct mmap_event *event, char *cwd, int cwdlen)
+void map__init(struct map *self, enum map_type type,
+	       u64 start, u64 end, u64 pgoff, struct dso *dso)
+{
+	self->type     = type;
+	self->start    = start;
+	self->end      = end;
+	self->pgoff    = pgoff;
+	self->dso      = dso;
+	self->map_ip   = map__map_ip;
+	self->unmap_ip = map__unmap_ip;
+	RB_CLEAR_NODE(&self->rb_node);
+}
+
+struct map *map__new(struct mmap_event *event, enum map_type type,
+		     char *cwd, int cwdlen)
 {
 	struct map *self = malloc(sizeof(*self));
 
 	if (self != NULL) {
 		const char *filename = event->filename;
 		char newfilename[PATH_MAX];
+		struct dso *dso;
 		int anon;
 
 		if (cwd) {
@@ -45,18 +61,15 @@
 			filename = newfilename;
 		}
 
-		self->start = event->start;
-		self->end   = event->start + event->len;
-		self->pgoff = event->pgoff;
-
-		self->dso = dsos__findnew(filename);
-		if (self->dso == NULL)
+		dso = dsos__findnew(filename);
+		if (dso == NULL)
 			goto out_delete;
 
+		map__init(self, type, event->start, event->start + event->len,
+			  event->pgoff, dso);
+
 		if (self->dso == vdso || anon)
-			self->map_ip = vdso__map_ip;
-		else
-			self->map_ip = map__map_ip;
+			self->map_ip = self->unmap_ip = identity__map_ip;
 	}
 	return self;
 out_delete:
@@ -64,6 +77,72 @@
 	return NULL;
 }
 
+void map__delete(struct map *self)
+{
+	free(self);
+}
+
+void map__fixup_start(struct map *self)
+{
+	struct rb_root *symbols = &self->dso->symbols[self->type];
+	struct rb_node *nd = rb_first(symbols);
+	if (nd != NULL) {
+		struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
+		self->start = sym->start;
+	}
+}
+
+void map__fixup_end(struct map *self)
+{
+	struct rb_root *symbols = &self->dso->symbols[self->type];
+	struct rb_node *nd = rb_last(symbols);
+	if (nd != NULL) {
+		struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
+		self->end = sym->end;
+	}
+}
+
+#define DSO__DELETED "(deleted)"
+
+struct symbol *map__find_symbol(struct map *self, u64 addr,
+				symbol_filter_t filter)
+{
+	if (!dso__loaded(self->dso, self->type)) {
+		int nr = dso__load(self->dso, self, filter);
+
+		if (nr < 0) {
+			if (self->dso->has_build_id) {
+				char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+
+				build_id__sprintf(self->dso->build_id,
+						  sizeof(self->dso->build_id),
+						  sbuild_id);
+				pr_warning("%s with build id %s not found",
+					   self->dso->long_name, sbuild_id);
+			} else
+				pr_warning("Failed to open %s",
+					   self->dso->long_name);
+			pr_warning(", continuing without symbols\n");
+			return NULL;
+		} else if (nr == 0) {
+			const char *name = self->dso->long_name;
+			const size_t len = strlen(name);
+			const size_t real_len = len - sizeof(DSO__DELETED);
+
+			if (len > sizeof(DSO__DELETED) &&
+			    strcmp(name + real_len + 1, DSO__DELETED) == 0) {
+				pr_warning("%.*s was updated, restart the long running apps that use it!\n",
+					   (int)real_len, name);
+			} else {
+				pr_warning("no symbols found in %s, maybe install a debug package?\n", name);
+			}
+			return NULL;
+		}
+	}
+
+	return self->dso->find_symbol(self->dso, self->type, addr);
+}
+
 struct map *map__clone(struct map *self)
 {
 	struct map *map = malloc(sizeof(*self));
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
deleted file mode 100644
index 0d8c85d..0000000
--- a/tools/perf/util/module.c
+++ /dev/null
@@ -1,545 +0,0 @@
-#include "util.h"
-#include "../perf.h"
-#include "string.h"
-#include "module.h"
-
-#include <libelf.h>
-#include <libgen.h>
-#include <gelf.h>
-#include <elf.h>
-#include <dirent.h>
-#include <sys/utsname.h>
-
-static unsigned int crc32(const char *p, unsigned int len)
-{
-	int i;
-	unsigned int crc = 0;
-
-	while (len--) {
-		crc ^= *p++;
-		for (i = 0; i < 8; i++)
-			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
-	}
-	return crc;
-}
-
-/* module section methods */
-
-struct sec_dso *sec_dso__new_dso(const char *name)
-{
-	struct sec_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
-
-	if (self != NULL) {
-		strcpy(self->name, name);
-		self->secs = RB_ROOT;
-		self->find_section = sec_dso__find_section;
-	}
-
-	return self;
-}
-
-static void sec_dso__delete_section(struct section *self)
-{
-	free(((void *)self));
-}
-
-void sec_dso__delete_sections(struct sec_dso *self)
-{
-	struct section *pos;
-	struct rb_node *next = rb_first(&self->secs);
-
-	while (next) {
-		pos = rb_entry(next, struct section, rb_node);
-		next = rb_next(&pos->rb_node);
-		rb_erase(&pos->rb_node, &self->secs);
-		sec_dso__delete_section(pos);
-	}
-}
-
-void sec_dso__delete_self(struct sec_dso *self)
-{
-	sec_dso__delete_sections(self);
-	free(self);
-}
-
-static void sec_dso__insert_section(struct sec_dso *self, struct section *sec)
-{
-	struct rb_node **p = &self->secs.rb_node;
-	struct rb_node *parent = NULL;
-	const u64 hash = sec->hash;
-	struct section *s;
-
-	while (*p != NULL) {
-		parent = *p;
-		s = rb_entry(parent, struct section, rb_node);
-		if (hash < s->hash)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-	rb_link_node(&sec->rb_node, parent, p);
-	rb_insert_color(&sec->rb_node, &self->secs);
-}
-
-struct section *sec_dso__find_section(struct sec_dso *self, const char *name)
-{
-	struct rb_node *n;
-	u64 hash;
-	int len;
-
-	if (self == NULL)
-		return NULL;
-
-	len = strlen(name);
-	hash = crc32(name, len);
-
-	n = self->secs.rb_node;
-
-	while (n) {
-		struct section *s = rb_entry(n, struct section, rb_node);
-
-		if (hash < s->hash)
-			n = n->rb_left;
-		else if (hash > s->hash)
-			n = n->rb_right;
-		else {
-			if (!strcmp(name, s->name))
-				return s;
-			else
-				n = rb_next(&s->rb_node);
-		}
-	}
-
-	return NULL;
-}
-
-static size_t sec_dso__fprintf_section(struct section *self, FILE *fp)
-{
-	return fprintf(fp, "name:%s vma:%llx path:%s\n",
-		       self->name, self->vma, self->path);
-}
-
-size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp)
-{
-	size_t ret = fprintf(fp, "dso: %s\n", self->name);
-
-	struct rb_node *nd;
-	for (nd = rb_first(&self->secs); nd; nd = rb_next(nd)) {
-		struct section *pos = rb_entry(nd, struct section, rb_node);
-		ret += sec_dso__fprintf_section(pos, fp);
-	}
-
-	return ret;
-}
-
-static struct section *section__new(const char *name, const char *path)
-{
-	struct section *self = calloc(1, sizeof(*self));
-
-	if (!self)
-		goto out_failure;
-
-	self->name = calloc(1, strlen(name) + 1);
-	if (!self->name)
-		goto out_failure;
-
-	self->path = calloc(1, strlen(path) + 1);
-	if (!self->path)
-		goto out_failure;
-
-	strcpy(self->name, name);
-	strcpy(self->path, path);
-	self->hash = crc32(self->name, strlen(name));
-
-	return self;
-
-out_failure:
-	if (self) {
-		if (self->name)
-			free(self->name);
-		if (self->path)
-			free(self->path);
-		free(self);
-	}
-
-	return NULL;
-}
-
-/* module methods */
-
-struct mod_dso *mod_dso__new_dso(const char *name)
-{
-	struct mod_dso *self = malloc(sizeof(*self) + strlen(name) + 1);
-
-	if (self != NULL) {
-		strcpy(self->name, name);
-		self->mods = RB_ROOT;
-		self->find_module = mod_dso__find_module;
-	}
-
-	return self;
-}
-
-static void mod_dso__delete_module(struct module *self)
-{
-	free(((void *)self));
-}
-
-void mod_dso__delete_modules(struct mod_dso *self)
-{
-	struct module *pos;
-	struct rb_node *next = rb_first(&self->mods);
-
-	while (next) {
-		pos = rb_entry(next, struct module, rb_node);
-		next = rb_next(&pos->rb_node);
-		rb_erase(&pos->rb_node, &self->mods);
-		mod_dso__delete_module(pos);
-	}
-}
-
-void mod_dso__delete_self(struct mod_dso *self)
-{
-	mod_dso__delete_modules(self);
-	free(self);
-}
-
-static void mod_dso__insert_module(struct mod_dso *self, struct module *mod)
-{
-	struct rb_node **p = &self->mods.rb_node;
-	struct rb_node *parent = NULL;
-	const u64 hash = mod->hash;
-	struct module *m;
-
-	while (*p != NULL) {
-		parent = *p;
-		m = rb_entry(parent, struct module, rb_node);
-		if (hash < m->hash)
-			p = &(*p)->rb_left;
-		else
-			p = &(*p)->rb_right;
-	}
-	rb_link_node(&mod->rb_node, parent, p);
-	rb_insert_color(&mod->rb_node, &self->mods);
-}
-
-struct module *mod_dso__find_module(struct mod_dso *self, const char *name)
-{
-	struct rb_node *n;
-	u64 hash;
-	int len;
-
-	if (self == NULL)
-		return NULL;
-
-	len = strlen(name);
-	hash = crc32(name, len);
-
-	n = self->mods.rb_node;
-
-	while (n) {
-		struct module *m = rb_entry(n, struct module, rb_node);
-
-		if (hash < m->hash)
-			n = n->rb_left;
-		else if (hash > m->hash)
-			n = n->rb_right;
-		else {
-			if (!strcmp(name, m->name))
-				return m;
-			else
-				n = rb_next(&m->rb_node);
-		}
-	}
-
-	return NULL;
-}
-
-static size_t mod_dso__fprintf_module(struct module *self, FILE *fp)
-{
-	return fprintf(fp, "name:%s path:%s\n", self->name, self->path);
-}
-
-size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp)
-{
-	struct rb_node *nd;
-	size_t ret;
-
-	ret = fprintf(fp, "dso: %s\n", self->name);
-
-	for (nd = rb_first(&self->mods); nd; nd = rb_next(nd)) {
-		struct module *pos = rb_entry(nd, struct module, rb_node);
-
-		ret += mod_dso__fprintf_module(pos, fp);
-	}
-
-	return ret;
-}
-
-static struct module *module__new(const char *name, const char *path)
-{
-	struct module *self = calloc(1, sizeof(*self));
-
-	if (!self)
-		goto out_failure;
-
-	self->name = calloc(1, strlen(name) + 1);
-	if (!self->name)
-		goto out_failure;
-
-	self->path = calloc(1, strlen(path) + 1);
-	if (!self->path)
-		goto out_failure;
-
-	strcpy(self->name, name);
-	strcpy(self->path, path);
-	self->hash = crc32(self->name, strlen(name));
-
-	return self;
-
-out_failure:
-	if (self) {
-		if (self->name)
-			free(self->name);
-		if (self->path)
-			free(self->path);
-		free(self);
-	}
-
-	return NULL;
-}
-
-static int mod_dso__load_sections(struct module *mod)
-{
-	int count = 0, path_len;
-	struct dirent *entry;
-	char *line = NULL;
-	char *dir_path;
-	DIR *dir;
-	size_t n;
-
-	path_len = strlen("/sys/module/");
-	path_len += strlen(mod->name);
-	path_len += strlen("/sections/");
-
-	dir_path = calloc(1, path_len + 1);
-	if (dir_path == NULL)
-		goto out_failure;
-
-	strcat(dir_path, "/sys/module/");
-	strcat(dir_path, mod->name);
-	strcat(dir_path, "/sections/");
-
-	dir = opendir(dir_path);
-	if (dir == NULL)
-		goto out_free;
-
-	while ((entry = readdir(dir))) {
-		struct section *section;
-		char *path, *vma;
-		int line_len;
-		FILE *file;
-
-		if (!strcmp(".", entry->d_name) || !strcmp("..", entry->d_name))
-			continue;
-
-		path = calloc(1, path_len + strlen(entry->d_name) + 1);
-		if (path == NULL)
-			break;
-		strcat(path, dir_path);
-		strcat(path, entry->d_name);
-
-		file = fopen(path, "r");
-		if (file == NULL) {
-			free(path);
-			break;
-		}
-
-		line_len = getline(&line, &n, file);
-		if (line_len < 0) {
-			free(path);
-			fclose(file);
-			break;
-		}
-
-		if (!line) {
-			free(path);
-			fclose(file);
-			break;
-		}
-
-		line[--line_len] = '\0'; /* \n */
-
-		vma = strstr(line, "0x");
-		if (!vma) {
-			free(path);
-			fclose(file);
-			break;
-		}
-		vma += 2;
-
-		section = section__new(entry->d_name, path);
-		if (!section) {
-			fprintf(stderr, "load_sections: allocation error\n");
-			free(path);
-			fclose(file);
-			break;
-		}
-
-		hex2u64(vma, &section->vma);
-		sec_dso__insert_section(mod->sections, section);
-
-		free(path);
-		fclose(file);
-		count++;
-	}
-
-	closedir(dir);
-	free(line);
-	free(dir_path);
-
-	return count;
-
-out_free:
-	free(dir_path);
-
-out_failure:
-	return count;
-}
-
-static int mod_dso__load_module_paths(struct mod_dso *self)
-{
-	struct utsname uts;
-	int count = 0, len, err = -1;
-	char *line = NULL;
-	FILE *file;
-	char *dpath, *dir;
-	size_t n;
-
-	if (uname(&uts) < 0)
-		return err;
-
-	len = strlen("/lib/modules/");
-	len += strlen(uts.release);
-	len += strlen("/modules.dep");
-
-	dpath = calloc(1, len + 1);
-	if (dpath == NULL)
-		return err;
-
-	strcat(dpath, "/lib/modules/");
-	strcat(dpath, uts.release);
-	strcat(dpath, "/modules.dep");
-
-	file = fopen(dpath, "r");
-	if (file == NULL)
-		goto out_failure;
-
-	dir = dirname(dpath);
-	if (!dir)
-		goto out_failure;
-	strcat(dir, "/");
-
-	while (!feof(file)) {
-		struct module *module;
-		char *name, *path, *tmp;
-		FILE *modfile;
-		int line_len;
-
-		line_len = getline(&line, &n, file);
-		if (line_len < 0)
-			break;
-
-		if (!line)
-			break;
-
-		line[--line_len] = '\0'; /* \n */
-
-		path = strchr(line, ':');
-		if (!path)
-			break;
-		*path = '\0';
-
-		path = strdup(line);
-		if (!path)
-			break;
-
-		if (!strstr(path, dir)) {
-			if (strncmp(path, "kernel/", 7))
-				break;
-
-			free(path);
-			path = calloc(1, strlen(dir) + strlen(line) + 1);
-			if (!path)
-				break;
-			strcat(path, dir);
-			strcat(path, line);
-		}
-
-		modfile = fopen(path, "r");
-		if (modfile == NULL)
-			break;
-		fclose(modfile);
-
-		name = strdup(path);
-		if (!name)
-			break;
-
-		name = strtok(name, "/");
-		tmp = name;
-
-		while (tmp) {
-			tmp = strtok(NULL, "/");
-			if (tmp)
-				name = tmp;
-		}
-
-		name = strsep(&name, ".");
-		if (!name)
-			break;
-
-		/* Quirk: replace '-' with '_' in all modules */
-		for (len = strlen(name); len; len--) {
-			if (*(name+len) == '-')
-				*(name+len) = '_';
-		}
-
-		module = module__new(name, path);
-		if (!module)
-			break;
-		mod_dso__insert_module(self, module);
-
-		module->sections = sec_dso__new_dso("sections");
-		if (!module->sections)
-			break;
-
-		module->active = mod_dso__load_sections(module);
-
-		if (module->active > 0)
-			count++;
-	}
-
-	if (feof(file))
-		err = count;
-	else
-		fprintf(stderr, "load_module_paths: modules.dep parsing failure!\n");
-
-out_failure:
-	if (dpath)
-		free(dpath);
-	if (file)
-		fclose(file);
-	if (line)
-		free(line);
-
-	return err;
-}
-
-int mod_dso__load_modules(struct mod_dso *dso)
-{
-	int err;
-
-	err = mod_dso__load_module_paths(dso);
-
-	return err;
-}
diff --git a/tools/perf/util/module.h b/tools/perf/util/module.h
deleted file mode 100644
index 8a592ef..0000000
--- a/tools/perf/util/module.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _PERF_MODULE_
-#define _PERF_MODULE_ 1
-
-#include <linux/types.h>
-#include "../types.h"
-#include <linux/list.h>
-#include <linux/rbtree.h>
-
-struct section {
-	struct rb_node	rb_node;
-	u64		hash;
-	u64		vma;
-	char		*name;
-	char		*path;
-};
-
-struct sec_dso {
-	struct list_head node;
-	struct rb_root	 secs;
-	struct section    *(*find_section)(struct sec_dso *, const char *name);
-	char		 name[0];
-};
-
-struct module {
-	struct rb_node	rb_node;
-	u64		hash;
-	char		*name;
-	char		*path;
-	struct sec_dso	*sections;
-	int		active;
-};
-
-struct mod_dso {
-	struct list_head node;
-	struct rb_root	 mods;
-	struct module    *(*find_module)(struct mod_dso *, const char *name);
-	char		 name[0];
-};
-
-struct sec_dso *sec_dso__new_dso(const char *name);
-void sec_dso__delete_sections(struct sec_dso *self);
-void sec_dso__delete_self(struct sec_dso *self);
-size_t sec_dso__fprintf(struct sec_dso *self, FILE *fp);
-struct section *sec_dso__find_section(struct sec_dso *self, const char *name);
-
-struct mod_dso *mod_dso__new_dso(const char *name);
-void mod_dso__delete_modules(struct mod_dso *self);
-void mod_dso__delete_self(struct mod_dso *self);
-size_t mod_dso__fprintf(struct mod_dso *self, FILE *fp);
-struct module *mod_dso__find_module(struct mod_dso *self, const char *name);
-int mod_dso__load_modules(struct mod_dso *dso);
-
-#endif /* _PERF_MODULE_ */
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 8cfb48c..9e5dbd6 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1,4 +1,4 @@
-
+#include "../../../include/linux/hw_breakpoint.h"
 #include "util.h"
 #include "../perf.h"
 #include "parse-options.h"
@@ -7,10 +7,12 @@
 #include "string.h"
 #include "cache.h"
 #include "header.h"
+#include "debugfs.h"
 
-int					nr_counters;
+int				nr_counters;
 
 struct perf_event_attr		attrs[MAX_COUNTERS];
+char				*filters[MAX_COUNTERS];
 
 struct event_symbol {
 	u8		type;
@@ -46,6 +48,8 @@
   { CSW(PAGE_FAULTS_MAJ),	"major-faults",		""		},
   { CSW(CONTEXT_SWITCHES),	"context-switches",	"cs"		},
   { CSW(CPU_MIGRATIONS),	"cpu-migrations",	"migrations"	},
+  { CSW(ALIGNMENT_FAULTS),	"alignment-faults",	""		},
+  { CSW(EMULATION_FAULTS),	"emulation-faults",	""		},
 };
 
 #define __PERF_EVENT_FIELD(config, name) \
@@ -74,6 +78,8 @@
 	"CPU-migrations",
 	"minor-faults",
 	"major-faults",
+	"alignment-faults",
+	"emulation-faults",
 };
 
 #define MAX_ALIASES 8
@@ -148,16 +154,6 @@
 
 #define MAX_EVENT_LENGTH 512
 
-int valid_debugfs_mount(const char *debugfs)
-{
-	struct statfs st_fs;
-
-	if (statfs(debugfs, &st_fs) < 0)
-		return -ENOENT;
-	else if (st_fs.f_type != (long) DEBUGFS_MAGIC)
-		return -ENOENT;
-	return 0;
-}
 
 struct tracepoint_path *tracepoint_id_to_path(u64 config)
 {
@@ -170,7 +166,7 @@
 	char evt_path[MAXPATHLEN];
 	char dir_path[MAXPATHLEN];
 
-	if (valid_debugfs_mount(debugfs_path))
+	if (debugfs_valid_mountpoint(debugfs_path))
 		return NULL;
 
 	sys_dir = opendir(debugfs_path);
@@ -201,7 +197,7 @@
 			if (id == config) {
 				closedir(evt_dir);
 				closedir(sys_dir);
-				path = calloc(1, sizeof(path));
+				path = zalloc(sizeof(path));
 				path->system = malloc(MAX_EVENT_LENGTH);
 				if (!path->system) {
 					free(path);
@@ -509,7 +505,7 @@
 	char sys_name[MAX_EVENT_LENGTH];
 	unsigned int sys_length, evt_length;
 
-	if (valid_debugfs_mount(debugfs_path))
+	if (debugfs_valid_mountpoint(debugfs_path))
 		return 0;
 
 	evt_name = strchr(*strp, ':');
@@ -544,6 +540,81 @@
 						     attr, strp);
 }
 
+static enum event_result
+parse_breakpoint_type(const char *type, const char **strp,
+		      struct perf_event_attr *attr)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (!type[i])
+			break;
+
+		switch (type[i]) {
+		case 'r':
+			attr->bp_type |= HW_BREAKPOINT_R;
+			break;
+		case 'w':
+			attr->bp_type |= HW_BREAKPOINT_W;
+			break;
+		case 'x':
+			attr->bp_type |= HW_BREAKPOINT_X;
+			break;
+		default:
+			return EVT_FAILED;
+		}
+	}
+	if (!attr->bp_type) /* Default */
+		attr->bp_type = HW_BREAKPOINT_R | HW_BREAKPOINT_W;
+
+	*strp = type + i;
+
+	return EVT_HANDLED;
+}
+
+static enum event_result
+parse_breakpoint_event(const char **strp, struct perf_event_attr *attr)
+{
+	const char *target;
+	const char *type;
+	char *endaddr;
+	u64 addr;
+	enum event_result err;
+
+	target = strchr(*strp, ':');
+	if (!target)
+		return EVT_FAILED;
+
+	if (strncmp(*strp, "mem", target - *strp) != 0)
+		return EVT_FAILED;
+
+	target++;
+
+	addr = strtoull(target, &endaddr, 0);
+	if (target == endaddr)
+		return EVT_FAILED;
+
+	attr->bp_addr = addr;
+	*strp = endaddr;
+
+	type = strchr(target, ':');
+
+	/* If no type is defined, just rw as default */
+	if (!type) {
+		attr->bp_type = HW_BREAKPOINT_R | HW_BREAKPOINT_W;
+	} else {
+		err = parse_breakpoint_type(++type, strp, attr);
+		if (err == EVT_FAILED)
+			return EVT_FAILED;
+	}
+
+	/* We should find a nice way to override the access type */
+	attr->bp_len = HW_BREAKPOINT_LEN_4;
+	attr->type = PERF_TYPE_BREAKPOINT;
+
+	return EVT_HANDLED;
+}
+
 static int check_events(const char *str, unsigned int i)
 {
 	int n;
@@ -677,6 +748,12 @@
 	if (ret != EVT_FAILED)
 		goto modifier;
 
+	ret = parse_breakpoint_event(str, attr);
+	if (ret != EVT_FAILED)
+		goto modifier;
+
+	fprintf(stderr, "invalid or unsupported event: '%s'\n", *str);
+	fprintf(stderr, "Run 'perf list' for a list of valid events\n");
 	return EVT_FAILED;
 
 modifier:
@@ -708,7 +785,6 @@
 	perf_header__push_event(id, orgname);
 }
 
-
 int parse_events(const struct option *opt __used, const char *str, int unset __used)
 {
 	struct perf_event_attr attr;
@@ -745,6 +821,28 @@
 	return 0;
 }
 
+int parse_filter(const struct option *opt __used, const char *str,
+		 int unset __used)
+{
+	int i = nr_counters - 1;
+	int len = strlen(str);
+
+	if (i < 0 || attrs[i].type != PERF_TYPE_TRACEPOINT) {
+		fprintf(stderr,
+			"-F option should follow a -e tracepoint option\n");
+		return -1;
+	}
+
+	filters[i] = malloc(len + 1);
+	if (!filters[i]) {
+		fprintf(stderr, "not enough memory to hold filter string\n");
+		return -1;
+	}
+	strcpy(filters[i], str);
+
+	return 0;
+}
+
 static const char * const event_type_descriptors[] = {
 	"",
 	"Hardware event",
@@ -764,7 +862,7 @@
 	char evt_path[MAXPATHLEN];
 	char dir_path[MAXPATHLEN];
 
-	if (valid_debugfs_mount(debugfs_path))
+	if (debugfs_valid_mountpoint(debugfs_path))
 		return;
 
 	sys_dir = opendir(debugfs_path);
@@ -782,7 +880,7 @@
 		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
 			snprintf(evt_path, MAXPATHLEN, "%s:%s",
 				 sys_dirent.d_name, evt_dirent.d_name);
-			fprintf(stderr, "  %-42s [%s]\n", evt_path,
+			printf("  %-42s [%s]\n", evt_path,
 				event_type_descriptors[PERF_TYPE_TRACEPOINT+1]);
 		}
 		closedir(evt_dir);
@@ -799,8 +897,8 @@
 	unsigned int i, type, op, prev_type = -1;
 	char name[40];
 
-	fprintf(stderr, "\n");
-	fprintf(stderr, "List of pre-defined events (to be used in -e):\n");
+	printf("\n");
+	printf("List of pre-defined events (to be used in -e):\n");
 
 	for (i = 0; i < ARRAY_SIZE(event_symbols); i++, syms++) {
 		type = syms->type + 1;
@@ -808,19 +906,19 @@
 			type = 0;
 
 		if (type != prev_type)
-			fprintf(stderr, "\n");
+			printf("\n");
 
 		if (strlen(syms->alias))
 			sprintf(name, "%s OR %s", syms->symbol, syms->alias);
 		else
 			strcpy(name, syms->symbol);
-		fprintf(stderr, "  %-42s [%s]\n", name,
+		printf("  %-42s [%s]\n", name,
 			event_type_descriptors[type]);
 
 		prev_type = type;
 	}
 
-	fprintf(stderr, "\n");
+	printf("\n");
 	for (type = 0; type < PERF_COUNT_HW_CACHE_MAX; type++) {
 		for (op = 0; op < PERF_COUNT_HW_CACHE_OP_MAX; op++) {
 			/* skip invalid cache type */
@@ -828,17 +926,20 @@
 				continue;
 
 			for (i = 0; i < PERF_COUNT_HW_CACHE_RESULT_MAX; i++) {
-				fprintf(stderr, "  %-42s [%s]\n",
+				printf("  %-42s [%s]\n",
 					event_cache_name(type, op, i),
 					event_type_descriptors[4]);
 			}
 		}
 	}
 
-	fprintf(stderr, "\n");
-	fprintf(stderr, "  %-42s [raw hardware event descriptor]\n",
+	printf("\n");
+	printf("  %-42s [raw hardware event descriptor]\n",
 		"rNNN");
-	fprintf(stderr, "\n");
+	printf("\n");
+
+	printf("  %-42s [hardware breakpoint]\n", "mem:<addr>[:access]");
+	printf("\n");
 
 	print_tracepoint_events();
 
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index 30c6081..b8c1f64 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -1,5 +1,5 @@
-#ifndef _PARSE_EVENTS_H
-#define _PARSE_EVENTS_H
+#ifndef __PERF_PARSE_EVENTS_H
+#define __PERF_PARSE_EVENTS_H
 /*
  * Parse symbolic events/counts passed in as options:
  */
@@ -17,11 +17,13 @@
 extern int			nr_counters;
 
 extern struct perf_event_attr attrs[MAX_COUNTERS];
+extern char *filters[MAX_COUNTERS];
 
 extern const char *event_name(int ctr);
 extern const char *__event_name(int type, u64 config);
 
 extern int parse_events(const struct option *opt, const char *str, int unset);
+extern int parse_filter(const struct option *opt, const char *str, int unset);
 
 #define EVENTS_HELP_MAX (128*1024)
 
@@ -31,4 +33,4 @@
 extern int valid_debugfs_mount(const char *debugfs);
 
 
-#endif /* _PARSE_EVENTS_H */
+#endif /* __PERF_PARSE_EVENTS_H */
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index 2ee248f..948805a 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -1,5 +1,5 @@
-#ifndef PARSE_OPTIONS_H
-#define PARSE_OPTIONS_H
+#ifndef __PERF_PARSE_OPTIONS_H
+#define __PERF_PARSE_OPTIONS_H
 
 enum parse_opt_type {
 	/* special types */
@@ -174,4 +174,4 @@
 
 extern const char *parse_options_fix_filename(const char *prefix, const char *file);
 
-#endif
+#endif /* __PERF_PARSE_OPTIONS_H */
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
new file mode 100644
index 0000000..cd7fbda
--- /dev/null
+++ b/tools/perf/util/probe-event.c
@@ -0,0 +1,484 @@
+/*
+ * probe-event.c : perf-probe definition to kprobe_events format converter
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#define _GNU_SOURCE
+#include <sys/utsname.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <limits.h>
+
+#undef _GNU_SOURCE
+#include "event.h"
+#include "string.h"
+#include "strlist.h"
+#include "debug.h"
+#include "parse-events.h"  /* For debugfs_path */
+#include "probe-event.h"
+
+#define MAX_CMDLEN 256
+#define MAX_PROBE_ARGS 128
+#define PERFPROBE_GROUP "probe"
+
+#define semantic_error(msg ...) die("Semantic error :" msg)
+
+/* If there is no space to write, returns -E2BIG. */
+static int e_snprintf(char *str, size_t size, const char *format, ...)
+{
+	int ret;
+	va_list ap;
+	va_start(ap, format);
+	ret = vsnprintf(str, size, format, ap);
+	va_end(ap);
+	if (ret >= (int)size)
+		ret = -E2BIG;
+	return ret;
+}
+
+/* Parse probepoint definition. */
+static void parse_perf_probe_probepoint(char *arg, struct probe_point *pp)
+{
+	char *ptr, *tmp;
+	char c, nc = 0;
+	/*
+	 * <Syntax>
+	 * perf probe SRC:LN
+	 * perf probe FUNC[+OFFS|%return][@SRC]
+	 */
+
+	ptr = strpbrk(arg, ":+@%");
+	if (ptr) {
+		nc = *ptr;
+		*ptr++ = '\0';
+	}
+
+	/* Check arg is function or file and copy it */
+	if (strchr(arg, '.'))	/* File */
+		pp->file = strdup(arg);
+	else			/* Function */
+		pp->function = strdup(arg);
+	DIE_IF(pp->file == NULL && pp->function == NULL);
+
+	/* Parse other options */
+	while (ptr) {
+		arg = ptr;
+		c = nc;
+		ptr = strpbrk(arg, ":+@%");
+		if (ptr) {
+			nc = *ptr;
+			*ptr++ = '\0';
+		}
+		switch (c) {
+		case ':':	/* Line number */
+			pp->line = strtoul(arg, &tmp, 0);
+			if (*tmp != '\0')
+				semantic_error("There is non-digit charactor"
+						" in line number.");
+			break;
+		case '+':	/* Byte offset from a symbol */
+			pp->offset = strtoul(arg, &tmp, 0);
+			if (*tmp != '\0')
+				semantic_error("There is non-digit charactor"
+						" in offset.");
+			break;
+		case '@':	/* File name */
+			if (pp->file)
+				semantic_error("SRC@SRC is not allowed.");
+			pp->file = strdup(arg);
+			DIE_IF(pp->file == NULL);
+			if (ptr)
+				semantic_error("@SRC must be the last "
+					       "option.");
+			break;
+		case '%':	/* Probe places */
+			if (strcmp(arg, "return") == 0) {
+				pp->retprobe = 1;
+			} else	/* Others not supported yet */
+				semantic_error("%%%s is not supported.", arg);
+			break;
+		default:
+			DIE_IF("Program has a bug.");
+			break;
+		}
+	}
+
+	/* Exclusion check */
+	if (pp->line && pp->offset)
+		semantic_error("Offset can't be used with line number.");
+
+	if (!pp->line && pp->file && !pp->function)
+		semantic_error("File always requires line number.");
+
+	if (pp->offset && !pp->function)
+		semantic_error("Offset requires an entry function.");
+
+	if (pp->retprobe && !pp->function)
+		semantic_error("Return probe requires an entry function.");
+
+	if ((pp->offset || pp->line) && pp->retprobe)
+		semantic_error("Offset/Line can't be used with return probe.");
+
+	pr_debug("symbol:%s file:%s line:%d offset:%d, return:%d\n",
+		 pp->function, pp->file, pp->line, pp->offset, pp->retprobe);
+}
+
+/* Parse perf-probe event definition */
+int parse_perf_probe_event(const char *str, struct probe_point *pp)
+{
+	char **argv;
+	int argc, i, need_dwarf = 0;
+
+	argv = argv_split(str, &argc);
+	if (!argv)
+		die("argv_split failed.");
+	if (argc > MAX_PROBE_ARGS + 1)
+		semantic_error("Too many arguments");
+
+	/* Parse probe point */
+	parse_perf_probe_probepoint(argv[0], pp);
+	if (pp->file || pp->line)
+		need_dwarf = 1;
+
+	/* Copy arguments and ensure return probe has no C argument */
+	pp->nr_args = argc - 1;
+	pp->args = zalloc(sizeof(char *) * pp->nr_args);
+	for (i = 0; i < pp->nr_args; i++) {
+		pp->args[i] = strdup(argv[i + 1]);
+		if (!pp->args[i])
+			die("Failed to copy argument.");
+		if (is_c_varname(pp->args[i])) {
+			if (pp->retprobe)
+				semantic_error("You can't specify local"
+						" variable for kretprobe");
+			need_dwarf = 1;
+		}
+	}
+
+	argv_free(argv);
+	return need_dwarf;
+}
+
+/* Parse kprobe_events event into struct probe_point */
+void parse_trace_kprobe_event(const char *str, char **group, char **event,
+			      struct probe_point *pp)
+{
+	char pr;
+	char *p;
+	int ret, i, argc;
+	char **argv;
+
+	pr_debug("Parsing kprobe_events: %s\n", str);
+	argv = argv_split(str, &argc);
+	if (!argv)
+		die("argv_split failed.");
+	if (argc < 2)
+		semantic_error("Too less arguments.");
+
+	/* Scan event and group name. */
+	ret = sscanf(argv[0], "%c:%a[^/ \t]/%a[^ \t]",
+		     &pr, (float *)(void *)group, (float *)(void *)event);
+	if (ret != 3)
+		semantic_error("Failed to parse event name: %s", argv[0]);
+	pr_debug("Group:%s Event:%s probe:%c\n", *group, *event, pr);
+
+	if (!pp)
+		goto end;
+
+	pp->retprobe = (pr == 'r');
+
+	/* Scan function name and offset */
+	ret = sscanf(argv[1], "%a[^+]+%d", (float *)(void *)&pp->function, &pp->offset);
+	if (ret == 1)
+		pp->offset = 0;
+
+	/* kprobe_events doesn't have this information */
+	pp->line = 0;
+	pp->file = NULL;
+
+	pp->nr_args = argc - 2;
+	pp->args = zalloc(sizeof(char *) * pp->nr_args);
+	for (i = 0; i < pp->nr_args; i++) {
+		p = strchr(argv[i + 2], '=');
+		if (p)	/* We don't need which register is assigned. */
+			*p = '\0';
+		pp->args[i] = strdup(argv[i + 2]);
+		if (!pp->args[i])
+			die("Failed to copy argument.");
+	}
+
+end:
+	argv_free(argv);
+}
+
+int synthesize_perf_probe_event(struct probe_point *pp)
+{
+	char *buf;
+	char offs[64] = "", line[64] = "";
+	int i, len, ret;
+
+	pp->probes[0] = buf = zalloc(MAX_CMDLEN);
+	if (!buf)
+		die("Failed to allocate memory by zalloc.");
+	if (pp->offset) {
+		ret = e_snprintf(offs, 64, "+%d", pp->offset);
+		if (ret <= 0)
+			goto error;
+	}
+	if (pp->line) {
+		ret = e_snprintf(line, 64, ":%d", pp->line);
+		if (ret <= 0)
+			goto error;
+	}
+
+	if (pp->function)
+		ret = e_snprintf(buf, MAX_CMDLEN, "%s%s%s%s", pp->function,
+				 offs, pp->retprobe ? "%return" : "", line);
+	else
+		ret = e_snprintf(buf, MAX_CMDLEN, "%s%s%s%s", pp->file, line);
+	if (ret <= 0)
+		goto error;
+	len = ret;
+
+	for (i = 0; i < pp->nr_args; i++) {
+		ret = e_snprintf(&buf[len], MAX_CMDLEN - len, " %s",
+				 pp->args[i]);
+		if (ret <= 0)
+			goto error;
+		len += ret;
+	}
+	pp->found = 1;
+
+	return pp->found;
+error:
+	free(pp->probes[0]);
+
+	return ret;
+}
+
+int synthesize_trace_kprobe_event(struct probe_point *pp)
+{
+	char *buf;
+	int i, len, ret;
+
+	pp->probes[0] = buf = zalloc(MAX_CMDLEN);
+	if (!buf)
+		die("Failed to allocate memory by zalloc.");
+	ret = e_snprintf(buf, MAX_CMDLEN, "%s+%d", pp->function, pp->offset);
+	if (ret <= 0)
+		goto error;
+	len = ret;
+
+	for (i = 0; i < pp->nr_args; i++) {
+		ret = e_snprintf(&buf[len], MAX_CMDLEN - len, " %s",
+				 pp->args[i]);
+		if (ret <= 0)
+			goto error;
+		len += ret;
+	}
+	pp->found = 1;
+
+	return pp->found;
+error:
+	free(pp->probes[0]);
+
+	return ret;
+}
+
+static int open_kprobe_events(int flags, int mode)
+{
+	char buf[PATH_MAX];
+	int ret;
+
+	ret = e_snprintf(buf, PATH_MAX, "%s/../kprobe_events", debugfs_path);
+	if (ret < 0)
+		die("Failed to make kprobe_events path.");
+
+	ret = open(buf, flags, mode);
+	if (ret < 0) {
+		if (errno == ENOENT)
+			die("kprobe_events file does not exist -"
+			    " please rebuild with CONFIG_KPROBE_TRACER.");
+		else
+			die("Could not open kprobe_events file: %s",
+			    strerror(errno));
+	}
+	return ret;
+}
+
+/* Get raw string list of current kprobe_events */
+static struct strlist *get_trace_kprobe_event_rawlist(int fd)
+{
+	int ret, idx;
+	FILE *fp;
+	char buf[MAX_CMDLEN];
+	char *p;
+	struct strlist *sl;
+
+	sl = strlist__new(true, NULL);
+
+	fp = fdopen(dup(fd), "r");
+	while (!feof(fp)) {
+		p = fgets(buf, MAX_CMDLEN, fp);
+		if (!p)
+			break;
+
+		idx = strlen(p) - 1;
+		if (p[idx] == '\n')
+			p[idx] = '\0';
+		ret = strlist__add(sl, buf);
+		if (ret < 0)
+			die("strlist__add failed: %s", strerror(-ret));
+	}
+	fclose(fp);
+
+	return sl;
+}
+
+/* Free and zero clear probe_point */
+static void clear_probe_point(struct probe_point *pp)
+{
+	int i;
+
+	if (pp->function)
+		free(pp->function);
+	if (pp->file)
+		free(pp->file);
+	for (i = 0; i < pp->nr_args; i++)
+		free(pp->args[i]);
+	if (pp->args)
+		free(pp->args);
+	for (i = 0; i < pp->found; i++)
+		free(pp->probes[i]);
+	memset(pp, 0, sizeof(pp));
+}
+
+/* List up current perf-probe events */
+void show_perf_probe_events(void)
+{
+	unsigned int i;
+	int fd;
+	char *group, *event;
+	struct probe_point pp;
+	struct strlist *rawlist;
+	struct str_node *ent;
+
+	fd = open_kprobe_events(O_RDONLY, 0);
+	rawlist = get_trace_kprobe_event_rawlist(fd);
+	close(fd);
+
+	for (i = 0; i < strlist__nr_entries(rawlist); i++) {
+		ent = strlist__entry(rawlist, i);
+		parse_trace_kprobe_event(ent->s, &group, &event, &pp);
+		synthesize_perf_probe_event(&pp);
+		printf("[%s:%s]\t%s\n", group, event, pp.probes[0]);
+		free(group);
+		free(event);
+		clear_probe_point(&pp);
+	}
+
+	strlist__delete(rawlist);
+}
+
+/* Get current perf-probe event names */
+static struct strlist *get_perf_event_names(int fd)
+{
+	unsigned int i;
+	char *group, *event;
+	struct strlist *sl, *rawlist;
+	struct str_node *ent;
+
+	rawlist = get_trace_kprobe_event_rawlist(fd);
+
+	sl = strlist__new(false, NULL);
+	for (i = 0; i < strlist__nr_entries(rawlist); i++) {
+		ent = strlist__entry(rawlist, i);
+		parse_trace_kprobe_event(ent->s, &group, &event, NULL);
+		strlist__add(sl, event);
+		free(group);
+	}
+
+	strlist__delete(rawlist);
+
+	return sl;
+}
+
+static int write_trace_kprobe_event(int fd, const char *buf)
+{
+	int ret;
+
+	ret = write(fd, buf, strlen(buf));
+	if (ret <= 0)
+		die("Failed to create event.");
+	else
+		printf("Added new event: %s\n", buf);
+
+	return ret;
+}
+
+static void get_new_event_name(char *buf, size_t len, const char *base,
+			       struct strlist *namelist)
+{
+	int i, ret;
+	for (i = 0; i < MAX_EVENT_INDEX; i++) {
+		ret = e_snprintf(buf, len, "%s_%d", base, i);
+		if (ret < 0)
+			die("snprintf() failed: %s", strerror(-ret));
+		if (!strlist__has_entry(namelist, buf))
+			break;
+	}
+	if (i == MAX_EVENT_INDEX)
+		die("Too many events are on the same function.");
+}
+
+void add_trace_kprobe_events(struct probe_point *probes, int nr_probes)
+{
+	int i, j, fd;
+	struct probe_point *pp;
+	char buf[MAX_CMDLEN];
+	char event[64];
+	struct strlist *namelist;
+
+	fd = open_kprobe_events(O_RDWR, O_APPEND);
+	/* Get current event names */
+	namelist = get_perf_event_names(fd);
+
+	for (j = 0; j < nr_probes; j++) {
+		pp = probes + j;
+		for (i = 0; i < pp->found; i++) {
+			/* Get an unused new event name */
+			get_new_event_name(event, 64, pp->function, namelist);
+			snprintf(buf, MAX_CMDLEN, "%c:%s/%s %s\n",
+				 pp->retprobe ? 'r' : 'p',
+				 PERFPROBE_GROUP, event,
+				 pp->probes[i]);
+			write_trace_kprobe_event(fd, buf);
+			/* Add added event name to namelist */
+			strlist__add(namelist, event);
+		}
+	}
+	close(fd);
+}
diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h
new file mode 100644
index 0000000..0c6fe56
--- /dev/null
+++ b/tools/perf/util/probe-event.h
@@ -0,0 +1,18 @@
+#ifndef _PROBE_EVENT_H
+#define _PROBE_EVENT_H
+
+#include "probe-finder.h"
+#include "strlist.h"
+
+extern int parse_perf_probe_event(const char *str, struct probe_point *pp);
+extern int synthesize_perf_probe_event(struct probe_point *pp);
+extern void parse_trace_kprobe_event(const char *str, char **group,
+				     char **event, struct probe_point *pp);
+extern int synthesize_trace_kprobe_event(struct probe_point *pp);
+extern void add_trace_kprobe_events(struct probe_point *probes, int nr_probes);
+extern void show_perf_probe_events(void);
+
+/* Maximum index number of event-name postfix */
+#define MAX_EVENT_INDEX	1024
+
+#endif /*_PROBE_EVENT_H */
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
new file mode 100644
index 0000000..293cdfc
--- /dev/null
+++ b/tools/perf/util/probe-finder.c
@@ -0,0 +1,732 @@
+/*
+ * probe-finder.c : C expression to kprobe event converter
+ *
+ * Written by Masami Hiramatsu <mhiramat@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <sys/utsname.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <ctype.h>
+
+#include "event.h"
+#include "debug.h"
+#include "util.h"
+#include "probe-finder.h"
+
+
+/* Dwarf_Die Linkage to parent Die */
+struct die_link {
+	struct die_link *parent;	/* Parent die */
+	Dwarf_Die die;			/* Current die */
+};
+
+static Dwarf_Debug __dw_debug;
+static Dwarf_Error __dw_error;
+
+/*
+ * Generic dwarf analysis helpers
+ */
+
+#define X86_32_MAX_REGS 8
+const char *x86_32_regs_table[X86_32_MAX_REGS] = {
+	"%ax",
+	"%cx",
+	"%dx",
+	"%bx",
+	"$stack",	/* Stack address instead of %sp */
+	"%bp",
+	"%si",
+	"%di",
+};
+
+#define X86_64_MAX_REGS 16
+const char *x86_64_regs_table[X86_64_MAX_REGS] = {
+	"%ax",
+	"%dx",
+	"%cx",
+	"%bx",
+	"%si",
+	"%di",
+	"%bp",
+	"%sp",
+	"%r8",
+	"%r9",
+	"%r10",
+	"%r11",
+	"%r12",
+	"%r13",
+	"%r14",
+	"%r15",
+};
+
+/* TODO: switching by dwarf address size */
+#ifdef __x86_64__
+#define ARCH_MAX_REGS X86_64_MAX_REGS
+#define arch_regs_table x86_64_regs_table
+#else
+#define ARCH_MAX_REGS X86_32_MAX_REGS
+#define arch_regs_table x86_32_regs_table
+#endif
+
+/* Return architecture dependent register string (for kprobe-tracer) */
+static const char *get_arch_regstr(unsigned int n)
+{
+	return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL;
+}
+
+/*
+ * Compare the tail of two strings.
+ * Return 0 if whole of either string is same as another's tail part.
+ */
+static int strtailcmp(const char *s1, const char *s2)
+{
+	int i1 = strlen(s1);
+	int i2 = strlen(s2);
+	while (--i1 > 0 && --i2 > 0) {
+		if (s1[i1] != s2[i2])
+			return s1[i1] - s2[i2];
+	}
+	return 0;
+}
+
+/* Find the fileno of the target file. */
+static Dwarf_Unsigned cu_find_fileno(Dwarf_Die cu_die, const char *fname)
+{
+	Dwarf_Signed cnt, i;
+	Dwarf_Unsigned found = 0;
+	char **srcs;
+	int ret;
+
+	if (!fname)
+		return 0;
+
+	ret = dwarf_srcfiles(cu_die, &srcs, &cnt, &__dw_error);
+	if (ret == DW_DLV_OK) {
+		for (i = 0; i < cnt && !found; i++) {
+			if (strtailcmp(srcs[i], fname) == 0)
+				found = i + 1;
+			dwarf_dealloc(__dw_debug, srcs[i], DW_DLA_STRING);
+		}
+		for (; i < cnt; i++)
+			dwarf_dealloc(__dw_debug, srcs[i], DW_DLA_STRING);
+		dwarf_dealloc(__dw_debug, srcs, DW_DLA_LIST);
+	}
+	if (found)
+		pr_debug("found fno: %d\n", (int)found);
+	return found;
+}
+
+/* Compare diename and tname */
+static int die_compare_name(Dwarf_Die dw_die, const char *tname)
+{
+	char *name;
+	int ret;
+	ret = dwarf_diename(dw_die, &name, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (ret == DW_DLV_OK) {
+		ret = strcmp(tname, name);
+		dwarf_dealloc(__dw_debug, name, DW_DLA_STRING);
+	} else
+		ret = -1;
+	return ret;
+}
+
+/* Check the address is in the subprogram(function). */
+static int die_within_subprogram(Dwarf_Die sp_die, Dwarf_Addr addr,
+				 Dwarf_Signed *offs)
+{
+	Dwarf_Addr lopc, hipc;
+	int ret;
+
+	/* TODO: check ranges */
+	ret = dwarf_lowpc(sp_die, &lopc, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (ret == DW_DLV_NO_ENTRY)
+		return 0;
+	ret = dwarf_highpc(sp_die, &hipc, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	if (lopc <= addr && addr < hipc) {
+		*offs = addr - lopc;
+		return 1;
+	} else
+		return 0;
+}
+
+/* Check the die is inlined function */
+static Dwarf_Bool die_inlined_subprogram(Dwarf_Die dw_die)
+{
+	/* TODO: check strictly */
+	Dwarf_Bool inl;
+	int ret;
+
+	ret = dwarf_hasattr(dw_die, DW_AT_inline, &inl, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	return inl;
+}
+
+/* Get the offset of abstruct_origin */
+static Dwarf_Off die_get_abstract_origin(Dwarf_Die dw_die)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Off cu_offs;
+	int ret;
+
+	ret = dwarf_attr(dw_die, DW_AT_abstract_origin, &attr, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	ret = dwarf_formref(attr, &cu_offs, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	dwarf_dealloc(__dw_debug, attr, DW_DLA_ATTR);
+	return cu_offs;
+}
+
+/* Get entry pc(or low pc, 1st entry of ranges)  of the die */
+static Dwarf_Addr die_get_entrypc(Dwarf_Die dw_die)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Addr addr;
+	Dwarf_Off offs;
+	Dwarf_Ranges *ranges;
+	Dwarf_Signed cnt;
+	int ret;
+
+	/* Try to get entry pc */
+	ret = dwarf_attr(dw_die, DW_AT_entry_pc, &attr, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (ret == DW_DLV_OK) {
+		ret = dwarf_formaddr(attr, &addr, &__dw_error);
+		DIE_IF(ret != DW_DLV_OK);
+		dwarf_dealloc(__dw_debug, attr, DW_DLA_ATTR);
+		return addr;
+	}
+
+	/* Try to get low pc */
+	ret = dwarf_lowpc(dw_die, &addr, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (ret == DW_DLV_OK)
+		return addr;
+
+	/* Try to get ranges */
+	ret = dwarf_attr(dw_die, DW_AT_ranges, &attr, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	ret = dwarf_formref(attr, &offs, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	ret = dwarf_get_ranges(__dw_debug, offs, &ranges, &cnt, NULL,
+				&__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	addr = ranges[0].dwr_addr1;
+	dwarf_ranges_dealloc(__dw_debug, ranges, cnt);
+	return addr;
+}
+
+/*
+ * Search a Die from Die tree.
+ * Note: cur_link->die should be deallocated in this function.
+ */
+static int __search_die_tree(struct die_link *cur_link,
+			     int (*die_cb)(struct die_link *, void *),
+			     void *data)
+{
+	Dwarf_Die new_die;
+	struct die_link new_link;
+	int ret;
+
+	if (!die_cb)
+		return 0;
+
+	/* Check current die */
+	while (!(ret = die_cb(cur_link, data))) {
+		/* Check child die */
+		ret = dwarf_child(cur_link->die, &new_die, &__dw_error);
+		DIE_IF(ret == DW_DLV_ERROR);
+		if (ret == DW_DLV_OK) {
+			new_link.parent = cur_link;
+			new_link.die = new_die;
+			ret = __search_die_tree(&new_link, die_cb, data);
+			if (ret)
+				break;
+		}
+
+		/* Move to next sibling */
+		ret = dwarf_siblingof(__dw_debug, cur_link->die, &new_die,
+				      &__dw_error);
+		DIE_IF(ret == DW_DLV_ERROR);
+		dwarf_dealloc(__dw_debug, cur_link->die, DW_DLA_DIE);
+		cur_link->die = new_die;
+		if (ret == DW_DLV_NO_ENTRY)
+			return 0;
+	}
+	dwarf_dealloc(__dw_debug, cur_link->die, DW_DLA_DIE);
+	return ret;
+}
+
+/* Search a die in its children's die tree */
+static int search_die_from_children(Dwarf_Die parent_die,
+				    int (*die_cb)(struct die_link *, void *),
+				    void *data)
+{
+	struct die_link new_link;
+	int ret;
+
+	new_link.parent = NULL;
+	ret = dwarf_child(parent_die, &new_link.die, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (ret == DW_DLV_OK)
+		return __search_die_tree(&new_link, die_cb, data);
+	else
+		return 0;
+}
+
+/* Find a locdesc corresponding to the address */
+static int attr_get_locdesc(Dwarf_Attribute attr, Dwarf_Locdesc *desc,
+			    Dwarf_Addr addr)
+{
+	Dwarf_Signed lcnt;
+	Dwarf_Locdesc **llbuf;
+	int ret, i;
+
+	ret = dwarf_loclist_n(attr, &llbuf, &lcnt, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	ret = DW_DLV_NO_ENTRY;
+	for (i = 0; i < lcnt; ++i) {
+		if (llbuf[i]->ld_lopc <= addr &&
+		    llbuf[i]->ld_hipc > addr) {
+			memcpy(desc, llbuf[i], sizeof(Dwarf_Locdesc));
+			desc->ld_s =
+				malloc(sizeof(Dwarf_Loc) * llbuf[i]->ld_cents);
+			DIE_IF(desc->ld_s == NULL);
+			memcpy(desc->ld_s, llbuf[i]->ld_s,
+				sizeof(Dwarf_Loc) * llbuf[i]->ld_cents);
+			ret = DW_DLV_OK;
+			break;
+		}
+		dwarf_dealloc(__dw_debug, llbuf[i]->ld_s, DW_DLA_LOC_BLOCK);
+		dwarf_dealloc(__dw_debug, llbuf[i], DW_DLA_LOCDESC);
+	}
+	/* Releasing loop */
+	for (; i < lcnt; ++i) {
+		dwarf_dealloc(__dw_debug, llbuf[i]->ld_s, DW_DLA_LOC_BLOCK);
+		dwarf_dealloc(__dw_debug, llbuf[i], DW_DLA_LOCDESC);
+	}
+	dwarf_dealloc(__dw_debug, llbuf, DW_DLA_LIST);
+	return ret;
+}
+
+/* Get decl_file attribute value (file number) */
+static Dwarf_Unsigned die_get_decl_file(Dwarf_Die sp_die)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Unsigned fno;
+	int ret;
+
+	ret = dwarf_attr(sp_die, DW_AT_decl_file, &attr, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	dwarf_formudata(attr, &fno, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	dwarf_dealloc(__dw_debug, attr, DW_DLA_ATTR);
+	return fno;
+}
+
+/* Get decl_line attribute value (line number) */
+static Dwarf_Unsigned die_get_decl_line(Dwarf_Die sp_die)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Unsigned lno;
+	int ret;
+
+	ret = dwarf_attr(sp_die, DW_AT_decl_line, &attr, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	dwarf_formudata(attr, &lno, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	dwarf_dealloc(__dw_debug, attr, DW_DLA_ATTR);
+	return lno;
+}
+
+/*
+ * Probe finder related functions
+ */
+
+/* Show a location */
+static void show_location(Dwarf_Loc *loc, struct probe_finder *pf)
+{
+	Dwarf_Small op;
+	Dwarf_Unsigned regn;
+	Dwarf_Signed offs;
+	int deref = 0, ret;
+	const char *regs;
+
+	op = loc->lr_atom;
+
+	/* If this is based on frame buffer, set the offset */
+	if (op == DW_OP_fbreg) {
+		deref = 1;
+		offs = (Dwarf_Signed)loc->lr_number;
+		op = pf->fbloc.ld_s[0].lr_atom;
+		loc = &pf->fbloc.ld_s[0];
+	} else
+		offs = 0;
+
+	if (op >= DW_OP_breg0 && op <= DW_OP_breg31) {
+		regn = op - DW_OP_breg0;
+		offs += (Dwarf_Signed)loc->lr_number;
+		deref = 1;
+	} else if (op >= DW_OP_reg0 && op <= DW_OP_reg31) {
+		regn = op - DW_OP_reg0;
+	} else if (op == DW_OP_bregx) {
+		regn = loc->lr_number;
+		offs += (Dwarf_Signed)loc->lr_number2;
+		deref = 1;
+	} else if (op == DW_OP_regx) {
+		regn = loc->lr_number;
+	} else
+		die("Dwarf_OP %d is not supported.\n", op);
+
+	regs = get_arch_regstr(regn);
+	if (!regs)
+		die("%lld exceeds max register number.\n", regn);
+
+	if (deref)
+		ret = snprintf(pf->buf, pf->len,
+				 " %s=%+lld(%s)", pf->var, offs, regs);
+	else
+		ret = snprintf(pf->buf, pf->len, " %s=%s", pf->var, regs);
+	DIE_IF(ret < 0);
+	DIE_IF(ret >= pf->len);
+}
+
+/* Show a variables in kprobe event format */
+static void show_variable(Dwarf_Die vr_die, struct probe_finder *pf)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Locdesc ld;
+	int ret;
+
+	ret = dwarf_attr(vr_die, DW_AT_location, &attr, &__dw_error);
+	if (ret != DW_DLV_OK)
+		goto error;
+	ret = attr_get_locdesc(attr, &ld, (pf->addr - pf->cu_base));
+	if (ret != DW_DLV_OK)
+		goto error;
+	/* TODO? */
+	DIE_IF(ld.ld_cents != 1);
+	show_location(&ld.ld_s[0], pf);
+	free(ld.ld_s);
+	dwarf_dealloc(__dw_debug, attr, DW_DLA_ATTR);
+	return ;
+error:
+	die("Failed to find the location of %s at this address.\n"
+	    " Perhaps, it has been optimized out.\n", pf->var);
+}
+
+static int variable_callback(struct die_link *dlink, void *data)
+{
+	struct probe_finder *pf = (struct probe_finder *)data;
+	Dwarf_Half tag;
+	int ret;
+
+	ret = dwarf_tag(dlink->die, &tag, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if ((tag == DW_TAG_formal_parameter ||
+	     tag == DW_TAG_variable) &&
+	    (die_compare_name(dlink->die, pf->var) == 0)) {
+		show_variable(dlink->die, pf);
+		return 1;
+	}
+	/* TODO: Support struct members and arrays */
+	return 0;
+}
+
+/* Find a variable in a subprogram die */
+static void find_variable(Dwarf_Die sp_die, struct probe_finder *pf)
+{
+	int ret;
+
+	if (!is_c_varname(pf->var)) {
+		/* Output raw parameters */
+		ret = snprintf(pf->buf, pf->len, " %s", pf->var);
+		DIE_IF(ret < 0);
+		DIE_IF(ret >= pf->len);
+		return ;
+	}
+
+	pr_debug("Searching '%s' variable in context.\n", pf->var);
+	/* Search child die for local variables and parameters. */
+	ret = search_die_from_children(sp_die, variable_callback, pf);
+	if (!ret)
+		die("Failed to find '%s' in this function.\n", pf->var);
+}
+
+/* Get a frame base on the address */
+static void get_current_frame_base(Dwarf_Die sp_die, struct probe_finder *pf)
+{
+	Dwarf_Attribute attr;
+	int ret;
+
+	ret = dwarf_attr(sp_die, DW_AT_frame_base, &attr, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+	ret = attr_get_locdesc(attr, &pf->fbloc, (pf->addr - pf->cu_base));
+	DIE_IF(ret != DW_DLV_OK);
+	dwarf_dealloc(__dw_debug, attr, DW_DLA_ATTR);
+}
+
+static void free_current_frame_base(struct probe_finder *pf)
+{
+	free(pf->fbloc.ld_s);
+	memset(&pf->fbloc, 0, sizeof(Dwarf_Locdesc));
+}
+
+/* Show a probe point to output buffer */
+static void show_probepoint(Dwarf_Die sp_die, Dwarf_Signed offs,
+			    struct probe_finder *pf)
+{
+	struct probe_point *pp = pf->pp;
+	char *name;
+	char tmp[MAX_PROBE_BUFFER];
+	int ret, i, len;
+
+	/* Output name of probe point */
+	ret = dwarf_diename(sp_die, &name, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (ret == DW_DLV_OK) {
+		ret = snprintf(tmp, MAX_PROBE_BUFFER, "%s+%u", name,
+				(unsigned int)offs);
+		/* Copy the function name if possible */
+		if (!pp->function) {
+			pp->function = strdup(name);
+			pp->offset = offs;
+		}
+		dwarf_dealloc(__dw_debug, name, DW_DLA_STRING);
+	} else {
+		/* This function has no name. */
+		ret = snprintf(tmp, MAX_PROBE_BUFFER, "0x%llx", pf->addr);
+		if (!pp->function) {
+			/* TODO: Use _stext */
+			pp->function = strdup("");
+			pp->offset = (int)pf->addr;
+		}
+	}
+	DIE_IF(ret < 0);
+	DIE_IF(ret >= MAX_PROBE_BUFFER);
+	len = ret;
+	pr_debug("Probe point found: %s\n", tmp);
+
+	/* Find each argument */
+	get_current_frame_base(sp_die, pf);
+	for (i = 0; i < pp->nr_args; i++) {
+		pf->var = pp->args[i];
+		pf->buf = &tmp[len];
+		pf->len = MAX_PROBE_BUFFER - len;
+		find_variable(sp_die, pf);
+		len += strlen(pf->buf);
+	}
+	free_current_frame_base(pf);
+
+	pp->probes[pp->found] = strdup(tmp);
+	pp->found++;
+}
+
+static int probeaddr_callback(struct die_link *dlink, void *data)
+{
+	struct probe_finder *pf = (struct probe_finder *)data;
+	Dwarf_Half tag;
+	Dwarf_Signed offs;
+	int ret;
+
+	ret = dwarf_tag(dlink->die, &tag, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	/* Check the address is in this subprogram */
+	if (tag == DW_TAG_subprogram &&
+	    die_within_subprogram(dlink->die, pf->addr, &offs)) {
+		show_probepoint(dlink->die, offs, pf);
+		return 1;
+	}
+	return 0;
+}
+
+/* Find probe point from its line number */
+static void find_by_line(struct probe_finder *pf)
+{
+	Dwarf_Signed cnt, i, clm;
+	Dwarf_Line *lines;
+	Dwarf_Unsigned lineno = 0;
+	Dwarf_Addr addr;
+	Dwarf_Unsigned fno;
+	int ret;
+
+	ret = dwarf_srclines(pf->cu_die, &lines, &cnt, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+
+	for (i = 0; i < cnt; i++) {
+		ret = dwarf_line_srcfileno(lines[i], &fno, &__dw_error);
+		DIE_IF(ret != DW_DLV_OK);
+		if (fno != pf->fno)
+			continue;
+
+		ret = dwarf_lineno(lines[i], &lineno, &__dw_error);
+		DIE_IF(ret != DW_DLV_OK);
+		if (lineno != pf->lno)
+			continue;
+
+		ret = dwarf_lineoff(lines[i], &clm, &__dw_error);
+		DIE_IF(ret != DW_DLV_OK);
+
+		ret = dwarf_lineaddr(lines[i], &addr, &__dw_error);
+		DIE_IF(ret != DW_DLV_OK);
+		pr_debug("Probe line found: line[%d]:%u,%d addr:0x%llx\n",
+			 (int)i, (unsigned)lineno, (int)clm, addr);
+		pf->addr = addr;
+		/* Search a real subprogram including this line, */
+		ret = search_die_from_children(pf->cu_die,
+					       probeaddr_callback, pf);
+		if (ret == 0)
+			die("Probe point is not found in subprograms.\n");
+		/* Continuing, because target line might be inlined. */
+	}
+	dwarf_srclines_dealloc(__dw_debug, lines, cnt);
+}
+
+/* Search function from function name */
+static int probefunc_callback(struct die_link *dlink, void *data)
+{
+	struct probe_finder *pf = (struct probe_finder *)data;
+	struct probe_point *pp = pf->pp;
+	struct die_link *lk;
+	Dwarf_Signed offs;
+	Dwarf_Half tag;
+	int ret;
+
+	ret = dwarf_tag(dlink->die, &tag, &__dw_error);
+	DIE_IF(ret == DW_DLV_ERROR);
+	if (tag == DW_TAG_subprogram) {
+		if (die_compare_name(dlink->die, pp->function) == 0) {
+			if (pp->line) {	/* Function relative line */
+				pf->fno = die_get_decl_file(dlink->die);
+				pf->lno = die_get_decl_line(dlink->die)
+					 + pp->line;
+				find_by_line(pf);
+				return 1;
+			}
+			if (die_inlined_subprogram(dlink->die)) {
+				/* Inlined function, save it. */
+				ret = dwarf_die_CU_offset(dlink->die,
+							  &pf->inl_offs,
+							  &__dw_error);
+				DIE_IF(ret != DW_DLV_OK);
+				pr_debug("inline definition offset %lld\n",
+					 pf->inl_offs);
+				return 0;	/* Continue to search */
+			}
+			/* Get probe address */
+			pf->addr = die_get_entrypc(dlink->die);
+			pf->addr += pp->offset;
+			/* TODO: Check the address in this function */
+			show_probepoint(dlink->die, pp->offset, pf);
+			return 1; /* Exit; no same symbol in this CU. */
+		}
+	} else if (tag == DW_TAG_inlined_subroutine && pf->inl_offs) {
+		if (die_get_abstract_origin(dlink->die) == pf->inl_offs) {
+			/* Get probe address */
+			pf->addr = die_get_entrypc(dlink->die);
+			pf->addr += pp->offset;
+			pr_debug("found inline addr: 0x%llx\n", pf->addr);
+			/* Inlined function. Get a real subprogram */
+			for (lk = dlink->parent; lk != NULL; lk = lk->parent) {
+				tag = 0;
+				dwarf_tag(lk->die, &tag, &__dw_error);
+				DIE_IF(ret == DW_DLV_ERROR);
+				if (tag == DW_TAG_subprogram &&
+				    !die_inlined_subprogram(lk->die))
+					goto found;
+			}
+			die("Failed to find real subprogram.\n");
+found:
+			/* Get offset from subprogram */
+			ret = die_within_subprogram(lk->die, pf->addr, &offs);
+			DIE_IF(!ret);
+			show_probepoint(lk->die, offs, pf);
+			/* Continue to search */
+		}
+	}
+	return 0;
+}
+
+static void find_by_func(struct probe_finder *pf)
+{
+	search_die_from_children(pf->cu_die, probefunc_callback, pf);
+}
+
+/* Find a probe point */
+int find_probepoint(int fd, struct probe_point *pp)
+{
+	Dwarf_Half addr_size = 0;
+	Dwarf_Unsigned next_cuh = 0;
+	int cu_number = 0, ret;
+	struct probe_finder pf = {.pp = pp};
+
+	ret = dwarf_init(fd, DW_DLC_READ, 0, 0, &__dw_debug, &__dw_error);
+	if (ret != DW_DLV_OK) {
+		pr_warning("No dwarf info found in the vmlinux - please rebuild with CONFIG_DEBUG_INFO.\n");
+		return -ENOENT;
+	}
+
+	pp->found = 0;
+	while (++cu_number) {
+		/* Search CU (Compilation Unit) */
+		ret = dwarf_next_cu_header(__dw_debug, NULL, NULL, NULL,
+			&addr_size, &next_cuh, &__dw_error);
+		DIE_IF(ret == DW_DLV_ERROR);
+		if (ret == DW_DLV_NO_ENTRY)
+			break;
+
+		/* Get the DIE(Debugging Information Entry) of this CU */
+		ret = dwarf_siblingof(__dw_debug, 0, &pf.cu_die, &__dw_error);
+		DIE_IF(ret != DW_DLV_OK);
+
+		/* Check if target file is included. */
+		if (pp->file)
+			pf.fno = cu_find_fileno(pf.cu_die, pp->file);
+
+		if (!pp->file || pf.fno) {
+			/* Save CU base address (for frame_base) */
+			ret = dwarf_lowpc(pf.cu_die, &pf.cu_base, &__dw_error);
+			DIE_IF(ret == DW_DLV_ERROR);
+			if (ret == DW_DLV_NO_ENTRY)
+				pf.cu_base = 0;
+			if (pp->function)
+				find_by_func(&pf);
+			else {
+				pf.lno = pp->line;
+				find_by_line(&pf);
+			}
+		}
+		dwarf_dealloc(__dw_debug, pf.cu_die, DW_DLA_DIE);
+	}
+	ret = dwarf_finish(__dw_debug, &__dw_error);
+	DIE_IF(ret != DW_DLV_OK);
+
+	return pp->found;
+}
+
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
new file mode 100644
index 0000000..bdebca6
--- /dev/null
+++ b/tools/perf/util/probe-finder.h
@@ -0,0 +1,57 @@
+#ifndef _PROBE_FINDER_H
+#define _PROBE_FINDER_H
+
+#define MAX_PATH_LEN 256
+#define MAX_PROBE_BUFFER 1024
+#define MAX_PROBES 128
+
+static inline int is_c_varname(const char *name)
+{
+	/* TODO */
+	return isalpha(name[0]) || name[0] == '_';
+}
+
+struct probe_point {
+	/* Inputs */
+	char	*file;		/* File name */
+	int	line;		/* Line number */
+
+	char	*function;	/* Function name */
+	int	offset;		/* Offset bytes */
+
+	int	nr_args;	/* Number of arguments */
+	char	**args;		/* Arguments */
+
+	int	retprobe;	/* Return probe */
+
+	/* Output */
+	int	found;		/* Number of found probe points */
+	char	*probes[MAX_PROBES];	/* Output buffers (will be allocated)*/
+};
+
+#ifndef NO_LIBDWARF
+extern int find_probepoint(int fd, struct probe_point *pp);
+
+#include <libdwarf/dwarf.h>
+#include <libdwarf/libdwarf.h>
+
+struct probe_finder {
+	struct probe_point	*pp;	/* Target probe point */
+
+	/* For function searching */
+	Dwarf_Addr	addr;		/* Address */
+	Dwarf_Unsigned	fno;		/* File number */
+	Dwarf_Unsigned	lno;		/* Line number */
+	Dwarf_Off	inl_offs;	/* Inline offset */
+	Dwarf_Die	cu_die;		/* Current CU */
+
+	/* For variable searching */
+	Dwarf_Addr	cu_base;	/* Current CU base address */
+	Dwarf_Locdesc	fbloc;		/* Location of Current Frame Base */
+	const char	*var;		/* Current variable name */
+	char		*buf;		/* Current output buffer */
+	int		len;		/* Length of output buffer */
+};
+#endif /* NO_LIBDWARF */
+
+#endif /*_PROBE_FINDER_H */
diff --git a/tools/perf/util/quote.h b/tools/perf/util/quote.h
index a5454a1..b6a0197 100644
--- a/tools/perf/util/quote.h
+++ b/tools/perf/util/quote.h
@@ -1,5 +1,5 @@
-#ifndef QUOTE_H
-#define QUOTE_H
+#ifndef __PERF_QUOTE_H
+#define __PERF_QUOTE_H
 
 #include <stddef.h>
 #include <stdio.h>
@@ -65,4 +65,4 @@
 extern void python_quote_print(FILE *stream, const char *src);
 extern void tcl_quote_print(FILE *stream, const char *src);
 
-#endif
+#endif /* __PERF_QUOTE_H */
diff --git a/tools/perf/util/run-command.h b/tools/perf/util/run-command.h
index cc1837d..d790287 100644
--- a/tools/perf/util/run-command.h
+++ b/tools/perf/util/run-command.h
@@ -1,5 +1,5 @@
-#ifndef RUN_COMMAND_H
-#define RUN_COMMAND_H
+#ifndef __PERF_RUN_COMMAND_H
+#define __PERF_RUN_COMMAND_H
 
 enum {
 	ERR_RUN_COMMAND_FORK = 10000,
@@ -85,4 +85,4 @@
 int start_async(struct async *async);
 int finish_async(struct async *async);
 
-#endif
+#endif /* __PERF_RUN_COMMAND_H */
diff --git a/tools/perf/util/sigchain.h b/tools/perf/util/sigchain.h
index 618083bc..1a53c11 100644
--- a/tools/perf/util/sigchain.h
+++ b/tools/perf/util/sigchain.h
@@ -1,5 +1,5 @@
-#ifndef SIGCHAIN_H
-#define SIGCHAIN_H
+#ifndef __PERF_SIGCHAIN_H
+#define __PERF_SIGCHAIN_H
 
 typedef void (*sigchain_fun)(int);
 
@@ -8,4 +8,4 @@
 
 void sigchain_push_common(sigchain_fun f);
 
-#endif /* SIGCHAIN_H */
+#endif /* __PERF_SIGCHAIN_H */
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
new file mode 100644
index 0000000..b490354
--- /dev/null
+++ b/tools/perf/util/sort.c
@@ -0,0 +1,290 @@
+#include "sort.h"
+
+regex_t		parent_regex;
+char		default_parent_pattern[] = "^sys_|^do_page_fault";
+char		*parent_pattern = default_parent_pattern;
+char		default_sort_order[] = "comm,dso,symbol";
+char		*sort_order = default_sort_order;
+int		sort__need_collapse = 0;
+int		sort__has_parent = 0;
+
+enum sort_type	sort__first_dimension;
+
+unsigned int dsos__col_width;
+unsigned int comms__col_width;
+unsigned int threads__col_width;
+static unsigned int parent_symbol__col_width;
+char * field_sep;
+
+LIST_HEAD(hist_entry__sort_list);
+
+struct sort_entry sort_thread = {
+	.header = "Command:  Pid",
+	.cmp	= sort__thread_cmp,
+	.print	= sort__thread_print,
+	.width	= &threads__col_width,
+};
+
+struct sort_entry sort_comm = {
+	.header		= "Command",
+	.cmp		= sort__comm_cmp,
+	.collapse	= sort__comm_collapse,
+	.print		= sort__comm_print,
+	.width		= &comms__col_width,
+};
+
+struct sort_entry sort_dso = {
+	.header = "Shared Object",
+	.cmp	= sort__dso_cmp,
+	.print	= sort__dso_print,
+	.width	= &dsos__col_width,
+};
+
+struct sort_entry sort_sym = {
+	.header = "Symbol",
+	.cmp	= sort__sym_cmp,
+	.print	= sort__sym_print,
+};
+
+struct sort_entry sort_parent = {
+	.header = "Parent symbol",
+	.cmp	= sort__parent_cmp,
+	.print	= sort__parent_print,
+	.width	= &parent_symbol__col_width,
+};
+
+struct sort_dimension {
+	const char		*name;
+	struct sort_entry	*entry;
+	int			taken;
+};
+
+static struct sort_dimension sort_dimensions[] = {
+	{ .name = "pid",	.entry = &sort_thread,	},
+	{ .name = "comm",	.entry = &sort_comm,	},
+	{ .name = "dso",	.entry = &sort_dso,	},
+	{ .name = "symbol",	.entry = &sort_sym,	},
+	{ .name = "parent",	.entry = &sort_parent,	},
+};
+
+int64_t cmp_null(void *l, void *r)
+{
+	if (!l && !r)
+		return 0;
+	else if (!l)
+		return -1;
+	else
+		return 1;
+}
+
+/* --sort pid */
+
+int64_t
+sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+int repsep_fprintf(FILE *fp, const char *fmt, ...)
+{
+	int n;
+	va_list ap;
+
+	va_start(ap, fmt);
+	if (!field_sep)
+		n = vfprintf(fp, fmt, ap);
+	else {
+		char *bf = NULL;
+		n = vasprintf(&bf, fmt, ap);
+		if (n > 0) {
+			char *sep = bf;
+
+			while (1) {
+				sep = strchr(sep, *field_sep);
+				if (sep == NULL)
+					break;
+				*sep = '.';
+			}
+		}
+		fputs(bf, fp);
+		free(bf);
+	}
+	va_end(ap);
+	return n;
+}
+
+size_t
+sort__thread_print(FILE *fp, struct hist_entry *self, unsigned int width)
+{
+	return repsep_fprintf(fp, "%*s:%5d", width - 6,
+			      self->thread->comm ?: "", self->thread->pid);
+}
+
+size_t
+sort__comm_print(FILE *fp, struct hist_entry *self, unsigned int width)
+{
+	return repsep_fprintf(fp, "%*s", width, self->thread->comm);
+}
+
+/* --sort dso */
+
+int64_t
+sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct dso *dso_l = left->map ? left->map->dso : NULL;
+	struct dso *dso_r = right->map ? right->map->dso : NULL;
+	const char *dso_name_l, *dso_name_r;
+
+	if (!dso_l || !dso_r)
+		return cmp_null(dso_l, dso_r);
+
+	if (verbose) {
+		dso_name_l = dso_l->long_name;
+		dso_name_r = dso_r->long_name;
+	} else {
+		dso_name_l = dso_l->short_name;
+		dso_name_r = dso_r->short_name;
+	}
+
+	return strcmp(dso_name_l, dso_name_r);
+}
+
+size_t
+sort__dso_print(FILE *fp, struct hist_entry *self, unsigned int width)
+{
+	if (self->map && self->map->dso) {
+		const char *dso_name = !verbose ? self->map->dso->short_name :
+						  self->map->dso->long_name;
+		return repsep_fprintf(fp, "%-*s", width, dso_name);
+	}
+
+	return repsep_fprintf(fp, "%*llx", width, (u64)self->ip);
+}
+
+/* --sort symbol */
+
+int64_t
+sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	u64 ip_l, ip_r;
+
+	if (left->sym == right->sym)
+		return 0;
+
+	ip_l = left->sym ? left->sym->start : left->ip;
+	ip_r = right->sym ? right->sym->start : right->ip;
+
+	return (int64_t)(ip_r - ip_l);
+}
+
+
+size_t
+sort__sym_print(FILE *fp, struct hist_entry *self, unsigned int width __used)
+{
+	size_t ret = 0;
+
+	if (verbose) {
+		char o = self->map ? dso__symtab_origin(self->map->dso) : '!';
+		ret += repsep_fprintf(fp, "%#018llx %c ", (u64)self->ip, o);
+	}
+
+	ret += repsep_fprintf(fp, "[%c] ", self->level);
+	if (self->sym)
+		ret += repsep_fprintf(fp, "%s", self->sym->name);
+	else
+		ret += repsep_fprintf(fp, "%#016llx", (u64)self->ip);
+
+	return ret;
+}
+
+/* --sort comm */
+
+int64_t
+sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+int64_t
+sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	char *comm_l = left->thread->comm;
+	char *comm_r = right->thread->comm;
+
+	if (!comm_l || !comm_r)
+		return cmp_null(comm_l, comm_r);
+
+	return strcmp(comm_l, comm_r);
+}
+
+/* --sort parent */
+
+int64_t
+sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	struct symbol *sym_l = left->parent;
+	struct symbol *sym_r = right->parent;
+
+	if (!sym_l || !sym_r)
+		return cmp_null(sym_l, sym_r);
+
+	return strcmp(sym_l->name, sym_r->name);
+}
+
+size_t
+sort__parent_print(FILE *fp, struct hist_entry *self, unsigned int width)
+{
+	return repsep_fprintf(fp, "%-*s", width,
+			      self->parent ? self->parent->name : "[other]");
+}
+
+int sort_dimension__add(const char *tok)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
+		struct sort_dimension *sd = &sort_dimensions[i];
+
+		if (sd->taken)
+			continue;
+
+		if (strncasecmp(tok, sd->name, strlen(tok)))
+			continue;
+
+		if (sd->entry->collapse)
+			sort__need_collapse = 1;
+
+		if (sd->entry == &sort_parent) {
+			int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED);
+			if (ret) {
+				char err[BUFSIZ];
+
+				regerror(ret, &parent_regex, err, sizeof(err));
+				fprintf(stderr, "Invalid regex: %s\n%s",
+					parent_pattern, err);
+				exit(-1);
+			}
+			sort__has_parent = 1;
+		}
+
+		if (list_empty(&hist_entry__sort_list)) {
+			if (!strcmp(sd->name, "pid"))
+				sort__first_dimension = SORT_PID;
+			else if (!strcmp(sd->name, "comm"))
+				sort__first_dimension = SORT_COMM;
+			else if (!strcmp(sd->name, "dso"))
+				sort__first_dimension = SORT_DSO;
+			else if (!strcmp(sd->name, "symbol"))
+				sort__first_dimension = SORT_SYM;
+			else if (!strcmp(sd->name, "parent"))
+				sort__first_dimension = SORT_PARENT;
+		}
+
+		list_add_tail(&sd->entry->list, &hist_entry__sort_list);
+		sd->taken = 1;
+
+		return 0;
+	}
+
+	return -ESRCH;
+}
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
new file mode 100644
index 0000000..333e664
--- /dev/null
+++ b/tools/perf/util/sort.h
@@ -0,0 +1,99 @@
+#ifndef __PERF_SORT_H
+#define __PERF_SORT_H
+#include "../builtin.h"
+
+#include "util.h"
+
+#include "color.h"
+#include <linux/list.h>
+#include "cache.h"
+#include <linux/rbtree.h>
+#include "symbol.h"
+#include "string.h"
+#include "callchain.h"
+#include "strlist.h"
+#include "values.h"
+
+#include "../perf.h"
+#include "debug.h"
+#include "header.h"
+
+#include "parse-options.h"
+#include "parse-events.h"
+
+#include "thread.h"
+#include "sort.h"
+
+extern regex_t parent_regex;
+extern char *sort_order;
+extern char default_parent_pattern[];
+extern char *parent_pattern;
+extern char default_sort_order[];
+extern int sort__need_collapse;
+extern int sort__has_parent;
+extern char *field_sep;
+extern struct sort_entry sort_comm;
+extern struct sort_entry sort_dso;
+extern struct sort_entry sort_sym;
+extern struct sort_entry sort_parent;
+extern unsigned int dsos__col_width;
+extern unsigned int comms__col_width;
+extern unsigned int threads__col_width;
+extern enum sort_type sort__first_dimension;
+
+struct hist_entry {
+	struct rb_node		rb_node;
+	u64			count;
+	struct thread		*thread;
+	struct map		*map;
+	struct symbol		*sym;
+	u64			ip;
+	char			level;
+	struct symbol		*parent;
+	struct callchain_node	callchain;
+	struct rb_root		sorted_chain;
+};
+
+enum sort_type {
+	SORT_PID,
+	SORT_COMM,
+	SORT_DSO,
+	SORT_SYM,
+	SORT_PARENT
+};
+
+/*
+ * configurable sorting bits
+ */
+
+struct sort_entry {
+	struct list_head list;
+
+	const char *header;
+
+	int64_t (*cmp)(struct hist_entry *, struct hist_entry *);
+	int64_t (*collapse)(struct hist_entry *, struct hist_entry *);
+	size_t	(*print)(FILE *fp, struct hist_entry *, unsigned int width);
+	unsigned int *width;
+	bool	elide;
+};
+
+extern struct sort_entry sort_thread;
+extern struct list_head hist_entry__sort_list;
+
+extern int repsep_fprintf(FILE *fp, const char *fmt, ...);
+extern size_t sort__thread_print(FILE *, struct hist_entry *, unsigned int);
+extern size_t sort__comm_print(FILE *, struct hist_entry *, unsigned int);
+extern size_t sort__dso_print(FILE *, struct hist_entry *, unsigned int);
+extern size_t sort__sym_print(FILE *, struct hist_entry *, unsigned int __used);
+extern int64_t cmp_null(void *, void *);
+extern int64_t sort__thread_cmp(struct hist_entry *, struct hist_entry *);
+extern int64_t sort__comm_cmp(struct hist_entry *, struct hist_entry *);
+extern int64_t sort__comm_collapse(struct hist_entry *, struct hist_entry *);
+extern int64_t sort__dso_cmp(struct hist_entry *, struct hist_entry *);
+extern int64_t sort__sym_cmp(struct hist_entry *, struct hist_entry *);
+extern int64_t sort__parent_cmp(struct hist_entry *, struct hist_entry *);
+extern size_t sort__parent_print(FILE *, struct hist_entry *, unsigned int);
+extern int sort_dimension__add(const char *);
+
+#endif	/* __PERF_SORT_H */
diff --git a/tools/perf/util/strbuf.h b/tools/perf/util/strbuf.h
index d2aa86c..a3d121d 100644
--- a/tools/perf/util/strbuf.h
+++ b/tools/perf/util/strbuf.h
@@ -1,5 +1,5 @@
-#ifndef STRBUF_H
-#define STRBUF_H
+#ifndef __PERF_STRBUF_H
+#define __PERF_STRBUF_H
 
 /*
  * Strbuf's can be use in many ways: as a byte array, or to store arbitrary
@@ -134,4 +134,4 @@
 extern int strbuf_branchname(struct strbuf *sb, const char *name);
 extern int strbuf_check_branch_ref(struct strbuf *sb, const char *name);
 
-#endif /* STRBUF_H */
+#endif /* __PERF_STRBUF_H */
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index c93eca9..f24a8cc 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -1,4 +1,5 @@
 #include "string.h"
+#include "util.h"
 
 static int hex(char ch)
 {
@@ -32,3 +33,196 @@
 
 	return p - ptr;
 }
+
+char *strxfrchar(char *s, char from, char to)
+{
+	char *p = s;
+
+	while ((p = strchr(p, from)) != NULL)
+		*p++ = to;
+
+	return s;
+}
+
+#define K 1024LL
+/*
+ * perf_atoll()
+ * Parse (\d+)(b|B|kb|KB|mb|MB|gb|GB|tb|TB) (e.g. "256MB")
+ * and return its numeric value
+ */
+s64 perf_atoll(const char *str)
+{
+	unsigned int i;
+	s64 length = -1, unit = 1;
+
+	if (!isdigit(str[0]))
+		goto out_err;
+
+	for (i = 1; i < strlen(str); i++) {
+		switch (str[i]) {
+		case 'B':
+		case 'b':
+			break;
+		case 'K':
+			if (str[i + 1] != 'B')
+				goto out_err;
+			else
+				goto kilo;
+		case 'k':
+			if (str[i + 1] != 'b')
+				goto out_err;
+kilo:
+			unit = K;
+			break;
+		case 'M':
+			if (str[i + 1] != 'B')
+				goto out_err;
+			else
+				goto mega;
+		case 'm':
+			if (str[i + 1] != 'b')
+				goto out_err;
+mega:
+			unit = K * K;
+			break;
+		case 'G':
+			if (str[i + 1] != 'B')
+				goto out_err;
+			else
+				goto giga;
+		case 'g':
+			if (str[i + 1] != 'b')
+				goto out_err;
+giga:
+			unit = K * K * K;
+			break;
+		case 'T':
+			if (str[i + 1] != 'B')
+				goto out_err;
+			else
+				goto tera;
+		case 't':
+			if (str[i + 1] != 'b')
+				goto out_err;
+tera:
+			unit = K * K * K * K;
+			break;
+		case '\0':	/* only specified figures */
+			unit = 1;
+			break;
+		default:
+			if (!isdigit(str[i]))
+				goto out_err;
+			break;
+		}
+	}
+
+	length = atoll(str) * unit;
+	goto out;
+
+out_err:
+	length = -1;
+out:
+	return length;
+}
+
+/*
+ * Helper function for splitting a string into an argv-like array.
+ * originaly copied from lib/argv_split.c
+ */
+static const char *skip_sep(const char *cp)
+{
+	while (*cp && isspace(*cp))
+		cp++;
+
+	return cp;
+}
+
+static const char *skip_arg(const char *cp)
+{
+	while (*cp && !isspace(*cp))
+		cp++;
+
+	return cp;
+}
+
+static int count_argc(const char *str)
+{
+	int count = 0;
+
+	while (*str) {
+		str = skip_sep(str);
+		if (*str) {
+			count++;
+			str = skip_arg(str);
+		}
+	}
+
+	return count;
+}
+
+/**
+ * argv_free - free an argv
+ * @argv - the argument vector to be freed
+ *
+ * Frees an argv and the strings it points to.
+ */
+void argv_free(char **argv)
+{
+	char **p;
+	for (p = argv; *p; p++)
+		free(*p);
+
+	free(argv);
+}
+
+/**
+ * argv_split - split a string at whitespace, returning an argv
+ * @str: the string to be split
+ * @argcp: returned argument count
+ *
+ * Returns an array of pointers to strings which are split out from
+ * @str.  This is performed by strictly splitting on white-space; no
+ * quote processing is performed.  Multiple whitespace characters are
+ * considered to be a single argument separator.  The returned array
+ * is always NULL-terminated.  Returns NULL on memory allocation
+ * failure.
+ */
+char **argv_split(const char *str, int *argcp)
+{
+	int argc = count_argc(str);
+	char **argv = zalloc(sizeof(*argv) * (argc+1));
+	char **argvp;
+
+	if (argv == NULL)
+		goto out;
+
+	if (argcp)
+		*argcp = argc;
+
+	argvp = argv;
+
+	while (*str) {
+		str = skip_sep(str);
+
+		if (*str) {
+			const char *p = str;
+			char *t;
+
+			str = skip_arg(str);
+
+			t = strndup(p, str-p);
+			if (t == NULL)
+				goto fail;
+			*argvp++ = t;
+		}
+	}
+	*argvp = NULL;
+
+out:
+	return argv;
+
+fail:
+	argv_free(argv);
+	return NULL;
+}
diff --git a/tools/perf/util/string.h b/tools/perf/util/string.h
index bf39dfa..bfecec2 100644
--- a/tools/perf/util/string.h
+++ b/tools/perf/util/string.h
@@ -1,11 +1,15 @@
-#ifndef _PERF_STRING_H_
-#define _PERF_STRING_H_
+#ifndef __PERF_STRING_H_
+#define __PERF_STRING_H_
 
 #include "types.h"
 
 int hex2u64(const char *ptr, u64 *val);
+char *strxfrchar(char *s, char from, char to);
+s64 perf_atoll(const char *str);
+char **argv_split(const char *str, int *argcp);
+void argv_free(char **argv);
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
 
-#endif
+#endif /* __PERF_STRING_H */
diff --git a/tools/perf/util/strlist.h b/tools/perf/util/strlist.h
index 921818e..cb46593 100644
--- a/tools/perf/util/strlist.h
+++ b/tools/perf/util/strlist.h
@@ -1,5 +1,5 @@
-#ifndef STRLIST_H_
-#define STRLIST_H_
+#ifndef __PERF_STRLIST_H
+#define __PERF_STRLIST_H
 
 #include <linux/rbtree.h>
 #include <stdbool.h>
@@ -36,4 +36,4 @@
 }
 
 int strlist__parse_list(struct strlist *self, const char *s);
-#endif /* STRLIST_H_ */
+#endif /* __PERF_STRLIST_H */
diff --git a/tools/perf/util/svghelper.h b/tools/perf/util/svghelper.h
index cd93195..e078198 100644
--- a/tools/perf/util/svghelper.h
+++ b/tools/perf/util/svghelper.h
@@ -1,5 +1,5 @@
-#ifndef _INCLUDE_GUARD_SVG_HELPER_
-#define _INCLUDE_GUARD_SVG_HELPER_
+#ifndef __PERF_SVGHELPER_H
+#define __PERF_SVGHELPER_H
 
 #include "types.h"
 
@@ -25,4 +25,4 @@
 
 extern int svg_page_width;
 
-#endif
+#endif /* __PERF_SVGHELPER_H */
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 226f44a..fffcb93 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -2,14 +2,20 @@
 #include "../perf.h"
 #include "string.h"
 #include "symbol.h"
+#include "thread.h"
 
 #include "debug.h"
 
+#include <asm/bug.h>
 #include <libelf.h>
 #include <gelf.h>
 #include <elf.h>
+#include <limits.h>
+#include <sys/utsname.h>
 
-const char *sym_hist_filter;
+#ifndef NT_GNU_BUILD_ID
+#define NT_GNU_BUILD_ID 3
+#endif
 
 enum dso_origin {
 	DSO__ORIG_KERNEL = 0,
@@ -18,94 +24,189 @@
 	DSO__ORIG_UBUNTU,
 	DSO__ORIG_BUILDID,
 	DSO__ORIG_DSO,
+	DSO__ORIG_KMODULE,
 	DSO__ORIG_NOT_FOUND,
 };
 
-static struct symbol *symbol__new(u64 start, u64 len,
-				  const char *name, unsigned int priv_size,
-				  u64 obj_start, int v)
+static void dsos__add(struct list_head *head, struct dso *dso);
+static struct map *thread__find_map_by_name(struct thread *self, char *name);
+static struct map *map__new2(u64 start, struct dso *dso, enum map_type type);
+struct symbol *dso__find_symbol(struct dso *self, enum map_type type, u64 addr);
+static int dso__load_kernel_sym(struct dso *self, struct map *map,
+				struct thread *thread, symbol_filter_t filter);
+unsigned int symbol__priv_size;
+static int vmlinux_path__nr_entries;
+static char **vmlinux_path;
+
+static struct symbol_conf symbol_conf__defaults = {
+	.use_modules	  = true,
+	.try_vmlinux_path = true,
+};
+
+static struct thread kthread_mem;
+struct thread *kthread = &kthread_mem;
+
+bool dso__loaded(const struct dso *self, enum map_type type)
+{
+	return self->loaded & (1 << type);
+}
+
+static void dso__set_loaded(struct dso *self, enum map_type type)
+{
+	self->loaded |= (1 << type);
+}
+
+static void symbols__fixup_end(struct rb_root *self)
+{
+	struct rb_node *nd, *prevnd = rb_first(self);
+	struct symbol *curr, *prev;
+
+	if (prevnd == NULL)
+		return;
+
+	curr = rb_entry(prevnd, struct symbol, rb_node);
+
+	for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
+		prev = curr;
+		curr = rb_entry(nd, struct symbol, rb_node);
+
+		if (prev->end == prev->start)
+			prev->end = curr->start - 1;
+	}
+
+	/* Last entry */
+	if (curr->end == curr->start)
+		curr->end = roundup(curr->start, 4096);
+}
+
+static void __thread__fixup_maps_end(struct thread *self, enum map_type type)
+{
+	struct map *prev, *curr;
+	struct rb_node *nd, *prevnd = rb_first(&self->maps[type]);
+
+	if (prevnd == NULL)
+		return;
+
+	curr = rb_entry(prevnd, struct map, rb_node);
+
+	for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
+		prev = curr;
+		curr = rb_entry(nd, struct map, rb_node);
+		prev->end = curr->start - 1;
+	}
+
+	/*
+	 * We still haven't the actual symbols, so guess the
+	 * last map final address.
+	 */
+	curr->end = ~0UL;
+}
+
+static void thread__fixup_maps_end(struct thread *self)
+{
+	int i;
+	for (i = 0; i < MAP__NR_TYPES; ++i)
+		__thread__fixup_maps_end(self, i);
+}
+
+static struct symbol *symbol__new(u64 start, u64 len, const char *name)
 {
 	size_t namelen = strlen(name) + 1;
-	struct symbol *self = calloc(1, priv_size + sizeof(*self) + namelen);
-
-	if (!self)
+	struct symbol *self = zalloc(symbol__priv_size +
+				     sizeof(*self) + namelen);
+	if (self == NULL)
 		return NULL;
 
-	if (v >= 2)
-		printf("new symbol: %016Lx [%08lx]: %s, hist: %p, obj_start: %p\n",
-			(u64)start, (unsigned long)len, name, self->hist, (void *)(unsigned long)obj_start);
+	if (symbol__priv_size)
+		self = ((void *)self) + symbol__priv_size;
 
-	self->obj_start= obj_start;
-	self->hist = NULL;
-	self->hist_sum = 0;
-
-	if (sym_hist_filter && !strcmp(name, sym_hist_filter))
-		self->hist = calloc(sizeof(u64), len);
-
-	if (priv_size) {
-		memset(self, 0, priv_size);
-		self = ((void *)self) + priv_size;
-	}
 	self->start = start;
 	self->end   = len ? start + len - 1 : start;
+
+	pr_debug3("%s: %s %#Lx-%#Lx\n", __func__, name, start, self->end);
+
 	memcpy(self->name, name, namelen);
 
 	return self;
 }
 
-static void symbol__delete(struct symbol *self, unsigned int priv_size)
+static void symbol__delete(struct symbol *self)
 {
-	free(((void *)self) - priv_size);
+	free(((void *)self) - symbol__priv_size);
 }
 
 static size_t symbol__fprintf(struct symbol *self, FILE *fp)
 {
-	if (!self->module)
-		return fprintf(fp, " %llx-%llx %s\n",
+	return fprintf(fp, " %llx-%llx %s\n",
 		       self->start, self->end, self->name);
-	else
-		return fprintf(fp, " %llx-%llx %s \t[%s]\n",
-		       self->start, self->end, self->name, self->module->name);
 }
 
-struct dso *dso__new(const char *name, unsigned int sym_priv_size)
+static void dso__set_long_name(struct dso *self, char *name)
+{
+	if (name == NULL)
+		return;
+	self->long_name = name;
+	self->long_name_len = strlen(name);
+}
+
+static void dso__set_basename(struct dso *self)
+{
+	self->short_name = basename(self->long_name);
+}
+
+struct dso *dso__new(const char *name)
 {
 	struct dso *self = malloc(sizeof(*self) + strlen(name) + 1);
 
 	if (self != NULL) {
+		int i;
 		strcpy(self->name, name);
-		self->syms = RB_ROOT;
-		self->sym_priv_size = sym_priv_size;
+		dso__set_long_name(self, self->name);
+		self->short_name = self->name;
+		for (i = 0; i < MAP__NR_TYPES; ++i)
+			self->symbols[i] = RB_ROOT;
 		self->find_symbol = dso__find_symbol;
 		self->slen_calculated = 0;
 		self->origin = DSO__ORIG_NOT_FOUND;
+		self->loaded = 0;
+		self->has_build_id = 0;
 	}
 
 	return self;
 }
 
-static void dso__delete_symbols(struct dso *self)
+static void symbols__delete(struct rb_root *self)
 {
 	struct symbol *pos;
-	struct rb_node *next = rb_first(&self->syms);
+	struct rb_node *next = rb_first(self);
 
 	while (next) {
 		pos = rb_entry(next, struct symbol, rb_node);
 		next = rb_next(&pos->rb_node);
-		rb_erase(&pos->rb_node, &self->syms);
-		symbol__delete(pos, self->sym_priv_size);
+		rb_erase(&pos->rb_node, self);
+		symbol__delete(pos);
 	}
 }
 
 void dso__delete(struct dso *self)
 {
-	dso__delete_symbols(self);
+	int i;
+	for (i = 0; i < MAP__NR_TYPES; ++i)
+		symbols__delete(&self->symbols[i]);
+	if (self->long_name != self->name)
+		free(self->long_name);
 	free(self);
 }
 
-static void dso__insert_symbol(struct dso *self, struct symbol *sym)
+void dso__set_build_id(struct dso *self, void *build_id)
 {
-	struct rb_node **p = &self->syms.rb_node;
+	memcpy(self->build_id, build_id, sizeof(self->build_id));
+	self->has_build_id = 1;
+}
+
+static void symbols__insert(struct rb_root *self, struct symbol *sym)
+{
+	struct rb_node **p = &self->rb_node;
 	struct rb_node *parent = NULL;
 	const u64 ip = sym->start;
 	struct symbol *s;
@@ -119,17 +220,17 @@
 			p = &(*p)->rb_right;
 	}
 	rb_link_node(&sym->rb_node, parent, p);
-	rb_insert_color(&sym->rb_node, &self->syms);
+	rb_insert_color(&sym->rb_node, self);
 }
 
-struct symbol *dso__find_symbol(struct dso *self, u64 ip)
+static struct symbol *symbols__find(struct rb_root *self, u64 ip)
 {
 	struct rb_node *n;
 
 	if (self == NULL)
 		return NULL;
 
-	n = self->syms.rb_node;
+	n = self->rb_node;
 
 	while (n) {
 		struct symbol *s = rb_entry(n, struct symbol, rb_node);
@@ -145,12 +246,42 @@
 	return NULL;
 }
 
-size_t dso__fprintf(struct dso *self, FILE *fp)
+struct symbol *dso__find_symbol(struct dso *self, enum map_type type, u64 addr)
 {
-	size_t ret = fprintf(fp, "dso: %s\n", self->name);
+	return symbols__find(&self->symbols[type], addr);
+}
 
+int build_id__sprintf(u8 *self, int len, char *bf)
+{
+	char *bid = bf;
+	u8 *raw = self;
+	int i;
+
+	for (i = 0; i < len; ++i) {
+		sprintf(bid, "%02x", *raw);
+		++raw;
+		bid += 2;
+	}
+
+	return raw - self;
+}
+
+size_t dso__fprintf_buildid(struct dso *self, FILE *fp)
+{
+	char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+
+	build_id__sprintf(self->build_id, sizeof(self->build_id), sbuild_id);
+	return fprintf(fp, "%s", sbuild_id);
+}
+
+size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp)
+{
 	struct rb_node *nd;
-	for (nd = rb_first(&self->syms); nd; nd = rb_next(nd)) {
+	size_t ret = fprintf(fp, "dso: %s (", self->short_name);
+
+	ret += dso__fprintf_buildid(self, fp);
+	ret += fprintf(fp, ")\n");
+	for (nd = rb_first(&self->symbols[type]); nd; nd = rb_next(nd)) {
 		struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
 		ret += symbol__fprintf(pos, fp);
 	}
@@ -158,13 +289,17 @@
 	return ret;
 }
 
-static int dso__load_kallsyms(struct dso *self, symbol_filter_t filter, int v)
+/*
+ * Loads the function entries in /proc/kallsyms into kernel_map->dso,
+ * so that we can in the next step set the symbol ->end address and then
+ * call kernel_maps__split_kallsyms.
+ */
+static int dso__load_all_kallsyms(struct dso *self, struct map *map)
 {
-	struct rb_node *nd, *prevnd;
 	char *line = NULL;
 	size_t n;
+	struct rb_root *root = &self->symbols[map->type];
 	FILE *file = fopen("/proc/kallsyms", "r");
-	int count = 0;
 
 	if (file == NULL)
 		goto out_failure;
@@ -174,6 +309,7 @@
 		struct symbol *sym;
 		int line_len, len;
 		char symbol_type;
+		char *symbol_name;
 
 		line_len = getline(&line, &n, file);
 		if (line_len < 0)
@@ -196,44 +332,26 @@
 		 */
 		if (symbol_type != 'T' && symbol_type != 'W')
 			continue;
+
+		symbol_name = line + len + 2;
 		/*
-		 * Well fix up the end later, when we have all sorted.
+		 * Will fix up the end later, when we have all symbols sorted.
 		 */
-		sym = symbol__new(start, 0xdead, line + len + 2,
-				  self->sym_priv_size, 0, v);
+		sym = symbol__new(start, 0, symbol_name);
 
 		if (sym == NULL)
 			goto out_delete_line;
-
-		if (filter && filter(self, sym))
-			symbol__delete(sym, self->sym_priv_size);
-		else {
-			dso__insert_symbol(self, sym);
-			count++;
-		}
-	}
-
-	/*
-	 * Now that we have all sorted out, just set the ->end of all
-	 * symbols
-	 */
-	prevnd = rb_first(&self->syms);
-
-	if (prevnd == NULL)
-		goto out_delete_line;
-
-	for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
-		struct symbol *prev = rb_entry(prevnd, struct symbol, rb_node),
-			      *curr = rb_entry(nd, struct symbol, rb_node);
-
-		prev->end = curr->start - 1;
-		prevnd = nd;
+		/*
+		 * We will pass the symbols to the filter later, in
+		 * map__split_kallsyms, when we have split the maps per module
+		 */
+		symbols__insert(root, sym);
 	}
 
 	free(line);
 	fclose(file);
 
-	return count;
+	return 0;
 
 out_delete_line:
 	free(line);
@@ -241,14 +359,114 @@
 	return -1;
 }
 
-static int dso__load_perf_map(struct dso *self, symbol_filter_t filter, int v)
+/*
+ * Split the symbols into maps, making sure there are no overlaps, i.e. the
+ * kernel range is broken in several maps, named [kernel].N, as we don't have
+ * the original ELF section names vmlinux have.
+ */
+static int dso__split_kallsyms(struct dso *self, struct map *map, struct thread *thread,
+			       symbol_filter_t filter)
+{
+	struct map *curr_map = map;
+	struct symbol *pos;
+	int count = 0;
+	struct rb_root *root = &self->symbols[map->type];
+	struct rb_node *next = rb_first(root);
+	int kernel_range = 0;
+
+	while (next) {
+		char *module;
+
+		pos = rb_entry(next, struct symbol, rb_node);
+		next = rb_next(&pos->rb_node);
+
+		module = strchr(pos->name, '\t');
+		if (module) {
+			if (!thread->use_modules)
+				goto discard_symbol;
+
+			*module++ = '\0';
+
+			if (strcmp(self->name, module)) {
+				curr_map = thread__find_map_by_name(thread, module);
+				if (curr_map == NULL) {
+					pr_debug("/proc/{kallsyms,modules} "
+					         "inconsistency!\n");
+					return -1;
+				}
+			}
+			/*
+			 * So that we look just like we get from .ko files,
+			 * i.e. not prelinked, relative to map->start.
+			 */
+			pos->start = curr_map->map_ip(curr_map, pos->start);
+			pos->end   = curr_map->map_ip(curr_map, pos->end);
+		} else if (curr_map != map) {
+			char dso_name[PATH_MAX];
+			struct dso *dso;
+
+			snprintf(dso_name, sizeof(dso_name), "[kernel].%d",
+				 kernel_range++);
+
+			dso = dso__new(dso_name);
+			if (dso == NULL)
+				return -1;
+
+			curr_map = map__new2(pos->start, dso, map->type);
+			if (map == NULL) {
+				dso__delete(dso);
+				return -1;
+			}
+
+			curr_map->map_ip = curr_map->unmap_ip = identity__map_ip;
+			__thread__insert_map(thread, curr_map);
+			++kernel_range;
+		}
+
+		if (filter && filter(curr_map, pos)) {
+discard_symbol:		rb_erase(&pos->rb_node, root);
+			symbol__delete(pos);
+		} else {
+			if (curr_map != map) {
+				rb_erase(&pos->rb_node, root);
+				symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
+			}
+			count++;
+		}
+	}
+
+	return count;
+}
+
+
+static int dso__load_kallsyms(struct dso *self, struct map *map,
+			      struct thread *thread, symbol_filter_t filter)
+{
+	if (dso__load_all_kallsyms(self, map) < 0)
+		return -1;
+
+	symbols__fixup_end(&self->symbols[map->type]);
+	self->origin = DSO__ORIG_KERNEL;
+
+	return dso__split_kallsyms(self, map, thread, filter);
+}
+
+size_t kernel_maps__fprintf(FILE *fp)
+{
+	size_t printed = fprintf(fp, "Kernel maps:\n");
+	printed += thread__fprintf_maps(kthread, fp);
+	return printed + fprintf(fp, "END kernel maps\n");
+}
+
+static int dso__load_perf_map(struct dso *self, struct map *map,
+			      symbol_filter_t filter)
 {
 	char *line = NULL;
 	size_t n;
 	FILE *file;
 	int nr_syms = 0;
 
-	file = fopen(self->name, "r");
+	file = fopen(self->long_name, "r");
 	if (file == NULL)
 		goto out_failure;
 
@@ -278,16 +496,15 @@
 		if (len + 2 >= line_len)
 			continue;
 
-		sym = symbol__new(start, size, line + len,
-				  self->sym_priv_size, start, v);
+		sym = symbol__new(start, size, line + len);
 
 		if (sym == NULL)
 			goto out_delete_line;
 
-		if (filter && filter(self, sym))
-			symbol__delete(sym, self->sym_priv_size);
+		if (filter && filter(map, sym))
+			symbol__delete(sym);
 		else {
-			dso__insert_symbol(self, sym);
+			symbols__insert(&self->symbols[map->type], sym);
 			nr_syms++;
 		}
 	}
@@ -393,7 +610,8 @@
  * And always look at the original dso, not at debuginfo packages, that
  * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
  */
-static int dso__synthesize_plt_symbols(struct  dso *self, int v)
+static int dso__synthesize_plt_symbols(struct  dso *self, struct map *map,
+				       symbol_filter_t filter)
 {
 	uint32_t nr_rel_entries, idx;
 	GElf_Sym sym;
@@ -409,7 +627,7 @@
 	Elf *elf;
 	int nr = 0, symidx, fd, err = 0;
 
-	fd = open(self->name, O_RDONLY);
+	fd = open(self->long_name, O_RDONLY);
 	if (fd < 0)
 		goto out;
 
@@ -477,12 +695,16 @@
 				 "%s@plt", elf_sym__name(&sym, symstrs));
 
 			f = symbol__new(plt_offset, shdr_plt.sh_entsize,
-					sympltname, self->sym_priv_size, 0, v);
+					sympltname);
 			if (!f)
 				goto out_elf_end;
 
-			dso__insert_symbol(self, f);
-			++nr;
+			if (filter && filter(map, f))
+				symbol__delete(f);
+			else {
+				symbols__insert(&self->symbols[map->type], f);
+				++nr;
+			}
 		}
 	} else if (shdr_rel_plt.sh_type == SHT_REL) {
 		GElf_Rel pos_mem, *pos;
@@ -495,12 +717,16 @@
 				 "%s@plt", elf_sym__name(&sym, symstrs));
 
 			f = symbol__new(plt_offset, shdr_plt.sh_entsize,
-					sympltname, self->sym_priv_size, 0, v);
+					sympltname);
 			if (!f)
 				goto out_elf_end;
 
-			dso__insert_symbol(self, f);
-			++nr;
+			if (filter && filter(map, f))
+				symbol__delete(f);
+			else {
+				symbols__insert(&self->symbols[map->type], f);
+				++nr;
+			}
 		}
 	}
 
@@ -513,14 +739,18 @@
 	if (err == 0)
 		return nr;
 out:
-	fprintf(stderr, "%s: problems reading %s PLT info.\n",
-		__func__, self->name);
+	pr_warning("%s: problems reading %s PLT info.\n",
+		   __func__, self->long_name);
 	return 0;
 }
 
-static int dso__load_sym(struct dso *self, int fd, const char *name,
-			 symbol_filter_t filter, int v, struct module *mod)
+static int dso__load_sym(struct dso *self, struct map *map,
+			 struct thread *thread, const char *name, int fd,
+			 symbol_filter_t filter, int kernel, int kmodule)
 {
+	struct map *curr_map = map;
+	struct dso *curr_dso = self;
+	size_t dso_name_len = strlen(self->short_name);
 	Elf_Data *symstrs, *secstrs;
 	uint32_t nr_syms;
 	int err = -1;
@@ -531,19 +761,16 @@
 	GElf_Sym sym;
 	Elf_Scn *sec, *sec_strndx;
 	Elf *elf;
-	int nr = 0, kernel = !strcmp("[kernel]", self->name);
+	int nr = 0;
 
 	elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
 	if (elf == NULL) {
-		if (v)
-			fprintf(stderr, "%s: cannot read %s ELF file.\n",
-				__func__, name);
+		pr_err("%s: cannot read %s ELF file.\n", __func__, name);
 		goto out_close;
 	}
 
 	if (gelf_getehdr(elf, &ehdr) == NULL) {
-		if (v)
-			fprintf(stderr, "%s: cannot get elf header.\n", __func__);
+		pr_err("%s: cannot get elf header.\n", __func__);
 		goto out_elf_end;
 	}
 
@@ -587,9 +814,7 @@
 	elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) {
 		struct symbol *f;
 		const char *elf_name;
-		char *demangled;
-		u64 obj_start;
-		struct section *section = NULL;
+		char *demangled = NULL;
 		int is_label = elf_sym__is_label(&sym);
 		const char *section_name;
 
@@ -605,52 +830,85 @@
 		if (is_label && !elf_sec__is_text(&shdr, secstrs))
 			continue;
 
+		elf_name = elf_sym__name(&sym, symstrs);
 		section_name = elf_sec__name(&shdr, secstrs);
-		obj_start = sym.st_value;
 
-		if (self->adjust_symbols) {
-			if (v >= 2)
-				printf("adjusting symbol: st_value: %Lx sh_addr: %Lx sh_offset: %Lx\n",
-					(u64)sym.st_value, (u64)shdr.sh_addr, (u64)shdr.sh_offset);
+		if (kernel || kmodule) {
+			char dso_name[PATH_MAX];
 
-			sym.st_value -= shdr.sh_addr - shdr.sh_offset;
+			if (strcmp(section_name,
+				   curr_dso->short_name + dso_name_len) == 0)
+				goto new_symbol;
+
+			if (strcmp(section_name, ".text") == 0) {
+				curr_map = map;
+				curr_dso = self;
+				goto new_symbol;
+			}
+
+			snprintf(dso_name, sizeof(dso_name),
+				 "%s%s", self->short_name, section_name);
+
+			curr_map = thread__find_map_by_name(thread, dso_name);
+			if (curr_map == NULL) {
+				u64 start = sym.st_value;
+
+				if (kmodule)
+					start += map->start + shdr.sh_offset;
+
+				curr_dso = dso__new(dso_name);
+				if (curr_dso == NULL)
+					goto out_elf_end;
+				curr_map = map__new2(start, curr_dso,
+						     MAP__FUNCTION);
+				if (curr_map == NULL) {
+					dso__delete(curr_dso);
+					goto out_elf_end;
+				}
+				curr_map->map_ip = identity__map_ip;
+				curr_map->unmap_ip = identity__map_ip;
+				curr_dso->origin = DSO__ORIG_KERNEL;
+				__thread__insert_map(kthread, curr_map);
+				dsos__add(&dsos__kernel, curr_dso);
+			} else
+				curr_dso = curr_map->dso;
+
+			goto new_symbol;
 		}
 
-		if (mod) {
-			section = mod->sections->find_section(mod->sections, section_name);
-			if (section)
-				sym.st_value += section->vma;
-			else {
-				fprintf(stderr, "dso__load_sym() module %s lookup of %s failed\n",
-					mod->name, section_name);
-				goto out_elf_end;
-			}
+		if (curr_dso->adjust_symbols) {
+			pr_debug2("adjusting symbol: st_value: %Lx sh_addr: "
+				  "%Lx sh_offset: %Lx\n", (u64)sym.st_value,
+				  (u64)shdr.sh_addr, (u64)shdr.sh_offset);
+			sym.st_value -= shdr.sh_addr - shdr.sh_offset;
 		}
 		/*
 		 * We need to figure out if the object was created from C++ sources
 		 * DWARF DW_compile_unit has this, but we don't always have access
 		 * to it...
 		 */
-		elf_name = elf_sym__name(&sym, symstrs);
 		demangled = bfd_demangle(NULL, elf_name, DMGL_PARAMS | DMGL_ANSI);
 		if (demangled != NULL)
 			elf_name = demangled;
-
-		f = symbol__new(sym.st_value, sym.st_size, elf_name,
-				self->sym_priv_size, obj_start, v);
+new_symbol:
+		f = symbol__new(sym.st_value, sym.st_size, elf_name);
 		free(demangled);
 		if (!f)
 			goto out_elf_end;
 
-		if (filter && filter(self, f))
-			symbol__delete(f, self->sym_priv_size);
+		if (filter && filter(curr_map, f))
+			symbol__delete(f);
 		else {
-			f->module = mod;
-			dso__insert_symbol(self, f);
+			symbols__insert(&curr_dso->symbols[curr_map->type], f);
 			nr++;
 		}
 	}
 
+	/*
+	 * For misannotated, zeroed, ASM function sizes.
+	 */
+	if (nr > 0)
+		symbols__fixup_end(&self->symbols[map->type]);
 	err = nr;
 out_elf_end:
 	elf_end(elf);
@@ -658,63 +916,153 @@
 	return err;
 }
 
-#define BUILD_ID_SIZE 128
-
-static char *dso__read_build_id(struct dso *self, int v)
+static bool dso__build_id_equal(const struct dso *self, u8 *build_id)
 {
-	int i;
+	return memcmp(self->build_id, build_id, sizeof(self->build_id)) == 0;
+}
+
+static bool __dsos__read_build_ids(struct list_head *head)
+{
+	bool have_build_id = false;
+	struct dso *pos;
+
+	list_for_each_entry(pos, head, node)
+		if (filename__read_build_id(pos->long_name, pos->build_id,
+					    sizeof(pos->build_id)) > 0) {
+			have_build_id	  = true;
+			pos->has_build_id = true;
+		}
+
+	return have_build_id;
+}
+
+bool dsos__read_build_ids(void)
+{
+	return __dsos__read_build_ids(&dsos__kernel) ||
+	       __dsos__read_build_ids(&dsos__user);
+}
+
+/*
+ * Align offset to 4 bytes as needed for note name and descriptor data.
+ */
+#define NOTE_ALIGN(n) (((n) + 3) & -4U)
+
+int filename__read_build_id(const char *filename, void *bf, size_t size)
+{
+	int fd, err = -1;
 	GElf_Ehdr ehdr;
 	GElf_Shdr shdr;
-	Elf_Data *build_id_data;
+	Elf_Data *data;
 	Elf_Scn *sec;
-	char *build_id = NULL, *bid;
-	unsigned char *raw;
+	Elf_Kind ek;
+	void *ptr;
 	Elf *elf;
-	int fd = open(self->name, O_RDONLY);
 
+	if (size < BUILD_ID_SIZE)
+		goto out;
+
+	fd = open(filename, O_RDONLY);
 	if (fd < 0)
 		goto out;
 
 	elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
 	if (elf == NULL) {
-		if (v)
-			fprintf(stderr, "%s: cannot read %s ELF file.\n",
-				__func__, self->name);
+		pr_debug2("%s: cannot read %s ELF file.\n", __func__, filename);
 		goto out_close;
 	}
 
+	ek = elf_kind(elf);
+	if (ek != ELF_K_ELF)
+		goto out_elf_end;
+
 	if (gelf_getehdr(elf, &ehdr) == NULL) {
-		if (v)
-			fprintf(stderr, "%s: cannot get elf header.\n", __func__);
+		pr_err("%s: cannot get elf header.\n", __func__);
 		goto out_elf_end;
 	}
 
-	sec = elf_section_by_name(elf, &ehdr, &shdr, ".note.gnu.build-id", NULL);
-	if (sec == NULL)
-		goto out_elf_end;
-
-	build_id_data = elf_getdata(sec, NULL);
-	if (build_id_data == NULL)
-		goto out_elf_end;
-	build_id = malloc(BUILD_ID_SIZE);
-	if (build_id == NULL)
-		goto out_elf_end;
-	raw = build_id_data->d_buf + 16;
-	bid = build_id;
-
-	for (i = 0; i < 20; ++i) {
-		sprintf(bid, "%02x", *raw);
-		++raw;
-		bid += 2;
+	sec = elf_section_by_name(elf, &ehdr, &shdr,
+				  ".note.gnu.build-id", NULL);
+	if (sec == NULL) {
+		sec = elf_section_by_name(elf, &ehdr, &shdr,
+					  ".notes", NULL);
+		if (sec == NULL)
+			goto out_elf_end;
 	}
-	if (v >= 2)
-		printf("%s(%s): %s\n", __func__, self->name, build_id);
+
+	data = elf_getdata(sec, NULL);
+	if (data == NULL)
+		goto out_elf_end;
+
+	ptr = data->d_buf;
+	while (ptr < (data->d_buf + data->d_size)) {
+		GElf_Nhdr *nhdr = ptr;
+		int namesz = NOTE_ALIGN(nhdr->n_namesz),
+		    descsz = NOTE_ALIGN(nhdr->n_descsz);
+		const char *name;
+
+		ptr += sizeof(*nhdr);
+		name = ptr;
+		ptr += namesz;
+		if (nhdr->n_type == NT_GNU_BUILD_ID &&
+		    nhdr->n_namesz == sizeof("GNU")) {
+			if (memcmp(name, "GNU", sizeof("GNU")) == 0) {
+				memcpy(bf, ptr, BUILD_ID_SIZE);
+				err = BUILD_ID_SIZE;
+				break;
+			}
+		}
+		ptr += descsz;
+	}
 out_elf_end:
 	elf_end(elf);
 out_close:
 	close(fd);
 out:
-	return build_id;
+	return err;
+}
+
+int sysfs__read_build_id(const char *filename, void *build_id, size_t size)
+{
+	int fd, err = -1;
+
+	if (size < BUILD_ID_SIZE)
+		goto out;
+
+	fd = open(filename, O_RDONLY);
+	if (fd < 0)
+		goto out;
+
+	while (1) {
+		char bf[BUFSIZ];
+		GElf_Nhdr nhdr;
+		int namesz, descsz;
+
+		if (read(fd, &nhdr, sizeof(nhdr)) != sizeof(nhdr))
+			break;
+
+		namesz = NOTE_ALIGN(nhdr.n_namesz);
+		descsz = NOTE_ALIGN(nhdr.n_descsz);
+		if (nhdr.n_type == NT_GNU_BUILD_ID &&
+		    nhdr.n_namesz == sizeof("GNU")) {
+			if (read(fd, bf, namesz) != namesz)
+				break;
+			if (memcmp(bf, "GNU", sizeof("GNU")) == 0) {
+				if (read(fd, build_id,
+				    BUILD_ID_SIZE) == BUILD_ID_SIZE) {
+					err = 0;
+					break;
+				}
+			} else if (read(fd, bf, descsz) != descsz)
+				break;
+		} else {
+			int n = namesz + descsz;
+			if (read(fd, bf, n) != n)
+				break;
+		}
+	}
+	close(fd);
+out:
+	return err;
 }
 
 char dso__symtab_origin(const struct dso *self)
@@ -726,6 +1074,7 @@
 		[DSO__ORIG_UBUNTU] =   'u',
 		[DSO__ORIG_BUILDID] =  'b',
 		[DSO__ORIG_DSO] =      'd',
+		[DSO__ORIG_KMODULE] =  'K',
 	};
 
 	if (self == NULL || self->origin == DSO__ORIG_NOT_FOUND)
@@ -733,20 +1082,27 @@
 	return origin[self->origin];
 }
 
-int dso__load(struct dso *self, symbol_filter_t filter, int v)
+int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 {
 	int size = PATH_MAX;
-	char *name = malloc(size), *build_id = NULL;
+	char *name;
+	u8 build_id[BUILD_ID_SIZE];
 	int ret = -1;
 	int fd;
 
+	dso__set_loaded(self, map->type);
+
+	if (self->kernel)
+		return dso__load_kernel_sym(self, map, kthread, filter);
+
+	name = malloc(size);
 	if (!name)
 		return -1;
 
 	self->adjust_symbols = 0;
 
 	if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
-		ret = dso__load_perf_map(self, filter, v);
+		ret = dso__load_perf_map(self, map, filter);
 		self->origin = ret > 0 ? DSO__ORIG_JAVA_JIT :
 					 DSO__ORIG_NOT_FOUND;
 		return ret;
@@ -759,34 +1115,50 @@
 		self->origin++;
 		switch (self->origin) {
 		case DSO__ORIG_FEDORA:
-			snprintf(name, size, "/usr/lib/debug%s.debug", self->name);
+			snprintf(name, size, "/usr/lib/debug%s.debug",
+				 self->long_name);
 			break;
 		case DSO__ORIG_UBUNTU:
-			snprintf(name, size, "/usr/lib/debug%s", self->name);
+			snprintf(name, size, "/usr/lib/debug%s",
+				 self->long_name);
 			break;
 		case DSO__ORIG_BUILDID:
-			build_id = dso__read_build_id(self, v);
-			if (build_id != NULL) {
+			if (filename__read_build_id(self->long_name, build_id,
+						    sizeof(build_id))) {
+				char build_id_hex[BUILD_ID_SIZE * 2 + 1];
+
+				build_id__sprintf(build_id, sizeof(build_id),
+						  build_id_hex);
 				snprintf(name, size,
 					 "/usr/lib/debug/.build-id/%.2s/%s.debug",
-					build_id, build_id + 2);
-				free(build_id);
+					build_id_hex, build_id_hex + 2);
+				if (self->has_build_id)
+					goto compare_build_id;
 				break;
 			}
 			self->origin++;
 			/* Fall thru */
 		case DSO__ORIG_DSO:
-			snprintf(name, size, "%s", self->name);
+			snprintf(name, size, "%s", self->long_name);
 			break;
 
 		default:
 			goto out;
 		}
 
+		if (self->has_build_id) {
+			if (filename__read_build_id(name, build_id,
+						    sizeof(build_id)) < 0)
+				goto more;
+compare_build_id:
+			if (!dso__build_id_equal(self, build_id))
+				goto more;
+		}
+
 		fd = open(name, O_RDONLY);
 	} while (fd < 0);
 
-	ret = dso__load_sym(self, fd, name, filter, v, NULL);
+	ret = dso__load_sym(self, map, NULL, name, fd, filter, 0, 0);
 	close(fd);
 
 	/*
@@ -796,7 +1168,7 @@
 		goto more;
 
 	if (ret > 0) {
-		int nr_plt = dso__synthesize_plt_symbols(self, v);
+		int nr_plt = dso__synthesize_plt_symbols(self, map, filter);
 		if (nr_plt > 0)
 			ret += nr_plt;
 	}
@@ -807,151 +1179,279 @@
 	return ret;
 }
 
-static int dso__load_module(struct dso *self, struct mod_dso *mods, const char *name,
-			     symbol_filter_t filter, int v)
+static struct map *thread__find_map_by_name(struct thread *self, char *name)
 {
-	struct module *mod = mod_dso__find_module(mods, name);
-	int err = 0, fd;
-
-	if (mod == NULL || !mod->active)
-		return err;
-
-	fd = open(mod->path, O_RDONLY);
-
-	if (fd < 0)
-		return err;
-
-	err = dso__load_sym(self, fd, name, filter, v, mod);
-	close(fd);
-
-	return err;
-}
-
-int dso__load_modules(struct dso *self, symbol_filter_t filter, int v)
-{
-	struct mod_dso *mods = mod_dso__new_dso("modules");
-	struct module *pos;
-	struct rb_node *next;
-	int err, count = 0;
-
-	err = mod_dso__load_modules(mods);
-
-	if (err <= 0)
-		return err;
-
-	/*
-	 * Iterate over modules, and load active symbols.
-	 */
-	next = rb_first(&mods->mods);
-	while (next) {
-		pos = rb_entry(next, struct module, rb_node);
-		err = dso__load_module(self, mods, pos->name, filter, v);
-
-		if (err < 0)
-			break;
-
-		next = rb_next(&pos->rb_node);
-		count += err;
-	}
-
-	if (err < 0) {
-		mod_dso__delete_modules(mods);
-		mod_dso__delete_self(mods);
-		return err;
-	}
-
-	return count;
-}
-
-static inline void dso__fill_symbol_holes(struct dso *self)
-{
-	struct symbol *prev = NULL;
 	struct rb_node *nd;
 
-	for (nd = rb_last(&self->syms); nd; nd = rb_prev(nd)) {
-		struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
+	for (nd = rb_first(&self->maps[MAP__FUNCTION]); nd; nd = rb_next(nd)) {
+		struct map *map = rb_entry(nd, struct map, rb_node);
 
-		if (prev) {
-			u64 hole = 0;
-			int alias = pos->start == prev->start;
-
-			if (!alias)
-				hole = prev->start - pos->end - 1;
-
-			if (hole || alias) {
-				if (alias)
-					pos->end = prev->end;
-				else if (hole)
-					pos->end = prev->start - 1;
-			}
-		}
-		prev = pos;
+		if (map->dso && strcmp(map->dso->name, name) == 0)
+			return map;
 	}
+
+	return NULL;
 }
 
-static int dso__load_vmlinux(struct dso *self, const char *vmlinux,
-			     symbol_filter_t filter, int v)
+static int dsos__set_modules_path_dir(char *dirname)
 {
-	int err, fd = open(vmlinux, O_RDONLY);
+	struct dirent *dent;
+	DIR *dir = opendir(dirname);
 
+	if (!dir) {
+		pr_debug("%s: cannot open %s dir\n", __func__, dirname);
+		return -1;
+	}
+
+	while ((dent = readdir(dir)) != NULL) {
+		char path[PATH_MAX];
+
+		if (dent->d_type == DT_DIR) {
+			if (!strcmp(dent->d_name, ".") ||
+			    !strcmp(dent->d_name, ".."))
+				continue;
+
+			snprintf(path, sizeof(path), "%s/%s",
+				 dirname, dent->d_name);
+			if (dsos__set_modules_path_dir(path) < 0)
+				goto failure;
+		} else {
+			char *dot = strrchr(dent->d_name, '.'),
+			     dso_name[PATH_MAX];
+			struct map *map;
+			char *long_name;
+
+			if (dot == NULL || strcmp(dot, ".ko"))
+				continue;
+			snprintf(dso_name, sizeof(dso_name), "[%.*s]",
+				 (int)(dot - dent->d_name), dent->d_name);
+
+			strxfrchar(dso_name, '-', '_');
+			map = thread__find_map_by_name(kthread, dso_name);
+			if (map == NULL)
+				continue;
+
+			snprintf(path, sizeof(path), "%s/%s",
+				 dirname, dent->d_name);
+
+			long_name = strdup(path);
+			if (long_name == NULL)
+				goto failure;
+			dso__set_long_name(map->dso, long_name);
+		}
+	}
+
+	return 0;
+failure:
+	closedir(dir);
+	return -1;
+}
+
+static int dsos__set_modules_path(void)
+{
+	struct utsname uts;
+	char modules_path[PATH_MAX];
+
+	if (uname(&uts) < 0)
+		return -1;
+
+	snprintf(modules_path, sizeof(modules_path), "/lib/modules/%s/kernel",
+		 uts.release);
+
+	return dsos__set_modules_path_dir(modules_path);
+}
+
+/*
+ * Constructor variant for modules (where we know from /proc/modules where
+ * they are loaded) and for vmlinux, where only after we load all the
+ * symbols we'll know where it starts and ends.
+ */
+static struct map *map__new2(u64 start, struct dso *dso, enum map_type type)
+{
+	struct map *self = malloc(sizeof(*self));
+
+	if (self != NULL) {
+		/*
+		 * ->end will be filled after we load all the symbols
+		 */
+		map__init(self, type, start, 0, 0, dso);
+	}
+
+	return self;
+}
+
+static int thread__create_module_maps(struct thread *self)
+{
+	char *line = NULL;
+	size_t n;
+	FILE *file = fopen("/proc/modules", "r");
+	struct map *map;
+
+	if (file == NULL)
+		return -1;
+
+	while (!feof(file)) {
+		char name[PATH_MAX];
+		u64 start;
+		struct dso *dso;
+		char *sep;
+		int line_len;
+
+		line_len = getline(&line, &n, file);
+		if (line_len < 0)
+			break;
+
+		if (!line)
+			goto out_failure;
+
+		line[--line_len] = '\0'; /* \n */
+
+		sep = strrchr(line, 'x');
+		if (sep == NULL)
+			continue;
+
+		hex2u64(sep + 1, &start);
+
+		sep = strchr(line, ' ');
+		if (sep == NULL)
+			continue;
+
+		*sep = '\0';
+
+		snprintf(name, sizeof(name), "[%s]", line);
+		dso = dso__new(name);
+
+		if (dso == NULL)
+			goto out_delete_line;
+
+		map = map__new2(start, dso, MAP__FUNCTION);
+		if (map == NULL) {
+			dso__delete(dso);
+			goto out_delete_line;
+		}
+
+		snprintf(name, sizeof(name),
+			 "/sys/module/%s/notes/.note.gnu.build-id", line);
+		if (sysfs__read_build_id(name, dso->build_id,
+					 sizeof(dso->build_id)) == 0)
+			dso->has_build_id = true;
+
+		dso->origin = DSO__ORIG_KMODULE;
+		__thread__insert_map(self, map);
+		dsos__add(&dsos__kernel, dso);
+	}
+
+	free(line);
+	fclose(file);
+
+	return dsos__set_modules_path();
+
+out_delete_line:
+	free(line);
+out_failure:
+	return -1;
+}
+
+static int dso__load_vmlinux(struct dso *self, struct map *map, struct thread *thread,
+			     const char *vmlinux, symbol_filter_t filter)
+{
+	int err = -1, fd;
+
+	if (self->has_build_id) {
+		u8 build_id[BUILD_ID_SIZE];
+
+		if (filename__read_build_id(vmlinux, build_id,
+					    sizeof(build_id)) < 0) {
+			pr_debug("No build_id in %s, ignoring it\n", vmlinux);
+			return -1;
+		}
+		if (!dso__build_id_equal(self, build_id)) {
+			char expected_build_id[BUILD_ID_SIZE * 2 + 1],
+			     vmlinux_build_id[BUILD_ID_SIZE * 2 + 1];
+
+			build_id__sprintf(self->build_id,
+					  sizeof(self->build_id),
+					  expected_build_id);
+			build_id__sprintf(build_id, sizeof(build_id),
+					  vmlinux_build_id);
+			pr_debug("build_id in %s is %s while expected is %s, "
+				 "ignoring it\n", vmlinux, vmlinux_build_id,
+				 expected_build_id);
+			return -1;
+		}
+	}
+
+	fd = open(vmlinux, O_RDONLY);
 	if (fd < 0)
 		return -1;
 
-	err = dso__load_sym(self, fd, vmlinux, filter, v, NULL);
-
-	if (err > 0)
-		dso__fill_symbol_holes(self);
-
+	dso__set_loaded(self, map->type);
+	err = dso__load_sym(self, map, thread, self->long_name, fd, filter, 1, 0);
 	close(fd);
 
 	return err;
 }
 
-int dso__load_kernel(struct dso *self, const char *vmlinux,
-		     symbol_filter_t filter, int v, int use_modules)
+static int dso__load_kernel_sym(struct dso *self, struct map *map,
+				struct thread *thread, symbol_filter_t filter)
 {
-	int err = -1;
+	int err;
+	bool is_kallsyms;
 
-	if (vmlinux) {
-		err = dso__load_vmlinux(self, vmlinux, filter, v);
-		if (err > 0 && use_modules) {
-			int syms = dso__load_modules(self, filter, v);
-
-			if (syms < 0) {
-				fprintf(stderr, "dso__load_modules failed!\n");
-				return syms;
+	if (vmlinux_path != NULL) {
+		int i;
+		pr_debug("Looking at the vmlinux_path (%d entries long)\n",
+			 vmlinux_path__nr_entries);
+		for (i = 0; i < vmlinux_path__nr_entries; ++i) {
+			err = dso__load_vmlinux(self, map, thread,
+						vmlinux_path[i], filter);
+			if (err > 0) {
+				pr_debug("Using %s for symbols\n",
+					 vmlinux_path[i]);
+				dso__set_long_name(self,
+						   strdup(vmlinux_path[i]));
+				goto out_fixup;
 			}
-			err += syms;
 		}
 	}
 
-	if (err <= 0)
-		err = dso__load_kallsyms(self, filter, v);
+	is_kallsyms = self->long_name[0] == '[';
+	if (is_kallsyms)
+		goto do_kallsyms;
 
-	if (err > 0)
-		self->origin = DSO__ORIG_KERNEL;
+	err = dso__load_vmlinux(self, map, thread, self->long_name, filter);
+	if (err <= 0) {
+		pr_info("The file %s cannot be used, "
+			"trying to use /proc/kallsyms...", self->long_name);
+do_kallsyms:
+		err = dso__load_kallsyms(self, map, thread, filter);
+		if (err > 0 && !is_kallsyms)
+                        dso__set_long_name(self, strdup("[kernel.kallsyms]"));
+	}
+
+	if (err > 0) {
+out_fixup:
+		map__fixup_start(map);
+		map__fixup_end(map);
+	}
 
 	return err;
 }
 
-LIST_HEAD(dsos);
-struct dso	*kernel_dso;
-struct dso	*vdso;
-struct dso	*hypervisor_dso;
+LIST_HEAD(dsos__user);
+LIST_HEAD(dsos__kernel);
+struct dso *vdso;
 
-const char	*vmlinux_name = "vmlinux";
-int		modules;
-
-static void dsos__add(struct dso *dso)
+static void dsos__add(struct list_head *head, struct dso *dso)
 {
-	list_add_tail(&dso->node, &dsos);
+	list_add_tail(&dso->node, head);
 }
 
-static struct dso *dsos__find(const char *name)
+static struct dso *dsos__find(struct list_head *head, const char *name)
 {
 	struct dso *pos;
 
-	list_for_each_entry(pos, &dsos, node)
+	list_for_each_entry(pos, head, node)
 		if (strcmp(pos->name, name) == 0)
 			return pos;
 	return NULL;
@@ -959,79 +1459,170 @@
 
 struct dso *dsos__findnew(const char *name)
 {
-	struct dso *dso = dsos__find(name);
-	int nr;
+	struct dso *dso = dsos__find(&dsos__user, name);
 
-	if (dso)
-		return dso;
-
-	dso = dso__new(name, 0);
-	if (!dso)
-		goto out_delete_dso;
-
-	nr = dso__load(dso, NULL, verbose);
-	if (nr < 0) {
-		eprintf("Failed to open: %s\n", name);
-		goto out_delete_dso;
+	if (!dso) {
+		dso = dso__new(name);
+		if (dso != NULL) {
+			dsos__add(&dsos__user, dso);
+			dso__set_basename(dso);
+		}
 	}
-	if (!nr)
-		eprintf("No symbols found in: %s, maybe install a debug package?\n", name);
-
-	dsos__add(dso);
 
 	return dso;
+}
 
-out_delete_dso:
-	dso__delete(dso);
-	return NULL;
+static void __dsos__fprintf(struct list_head *head, FILE *fp)
+{
+	struct dso *pos;
+
+	list_for_each_entry(pos, head, node) {
+		int i;
+		for (i = 0; i < MAP__NR_TYPES; ++i)
+			dso__fprintf(pos, i, fp);
+	}
 }
 
 void dsos__fprintf(FILE *fp)
 {
+	__dsos__fprintf(&dsos__kernel, fp);
+	__dsos__fprintf(&dsos__user, fp);
+}
+
+static size_t __dsos__fprintf_buildid(struct list_head *head, FILE *fp)
+{
 	struct dso *pos;
+	size_t ret = 0;
 
-	list_for_each_entry(pos, &dsos, node)
-		dso__fprintf(pos, fp);
+	list_for_each_entry(pos, head, node) {
+		ret += dso__fprintf_buildid(pos, fp);
+		ret += fprintf(fp, " %s\n", pos->long_name);
+	}
+	return ret;
 }
 
-static struct symbol *vdso__find_symbol(struct dso *dso, u64 ip)
+size_t dsos__fprintf_buildid(FILE *fp)
 {
-	return dso__find_symbol(dso, ip);
+	return (__dsos__fprintf_buildid(&dsos__kernel, fp) +
+		__dsos__fprintf_buildid(&dsos__user, fp));
 }
 
-int load_kernel(void)
+static int thread__create_kernel_map(struct thread *self, const char *vmlinux)
 {
-	int err;
+	struct map *kmap;
+	struct dso *kernel = dso__new(vmlinux ?: "[kernel.kallsyms]");
 
-	kernel_dso = dso__new("[kernel]", 0);
-	if (!kernel_dso)
+	if (kernel == NULL)
 		return -1;
 
-	err = dso__load_kernel(kernel_dso, vmlinux_name, NULL, verbose, modules);
-	if (err <= 0) {
-		dso__delete(kernel_dso);
-		kernel_dso = NULL;
-	} else
-		dsos__add(kernel_dso);
+	kmap = map__new2(0, kernel, MAP__FUNCTION);
+	if (kmap == NULL)
+		goto out_delete_kernel_dso;
 
-	vdso = dso__new("[vdso]", 0);
-	if (!vdso)
-		return -1;
+	kmap->map_ip	   = kmap->unmap_ip = identity__map_ip;
+	kernel->short_name = "[kernel]";
+	kernel->kernel	   = 1;
 
-	vdso->find_symbol = vdso__find_symbol;
+	vdso = dso__new("[vdso]");
+	if (vdso == NULL)
+		goto out_delete_kernel_map;
+	dso__set_loaded(vdso, MAP__FUNCTION);
 
-	dsos__add(vdso);
+	if (sysfs__read_build_id("/sys/kernel/notes", kernel->build_id,
+				 sizeof(kernel->build_id)) == 0)
+		kernel->has_build_id = true;
 
-	hypervisor_dso = dso__new("[hypervisor]", 0);
-	if (!hypervisor_dso)
-		return -1;
-	dsos__add(hypervisor_dso);
+	__thread__insert_map(self, kmap);
+	dsos__add(&dsos__kernel, kernel);
+	dsos__add(&dsos__user, vdso);
 
-	return err;
+	return 0;
+
+out_delete_kernel_map:
+	map__delete(kmap);
+out_delete_kernel_dso:
+	dso__delete(kernel);
+	return -1;
 }
 
-
-void symbol__init(void)
+static void vmlinux_path__exit(void)
 {
+	while (--vmlinux_path__nr_entries >= 0) {
+		free(vmlinux_path[vmlinux_path__nr_entries]);
+		vmlinux_path[vmlinux_path__nr_entries] = NULL;
+	}
+
+	free(vmlinux_path);
+	vmlinux_path = NULL;
+}
+
+static int vmlinux_path__init(void)
+{
+	struct utsname uts;
+	char bf[PATH_MAX];
+
+	if (uname(&uts) < 0)
+		return -1;
+
+	vmlinux_path = malloc(sizeof(char *) * 5);
+	if (vmlinux_path == NULL)
+		return -1;
+
+	vmlinux_path[vmlinux_path__nr_entries] = strdup("vmlinux");
+	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
+		goto out_fail;
+	++vmlinux_path__nr_entries;
+	vmlinux_path[vmlinux_path__nr_entries] = strdup("/boot/vmlinux");
+	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
+		goto out_fail;
+	++vmlinux_path__nr_entries;
+	snprintf(bf, sizeof(bf), "/boot/vmlinux-%s", uts.release);
+	vmlinux_path[vmlinux_path__nr_entries] = strdup(bf);
+	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
+		goto out_fail;
+	++vmlinux_path__nr_entries;
+	snprintf(bf, sizeof(bf), "/lib/modules/%s/build/vmlinux", uts.release);
+	vmlinux_path[vmlinux_path__nr_entries] = strdup(bf);
+	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
+		goto out_fail;
+	++vmlinux_path__nr_entries;
+	snprintf(bf, sizeof(bf), "/usr/lib/debug/lib/modules/%s/vmlinux",
+		 uts.release);
+	vmlinux_path[vmlinux_path__nr_entries] = strdup(bf);
+	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
+		goto out_fail;
+	++vmlinux_path__nr_entries;
+
+	return 0;
+
+out_fail:
+	vmlinux_path__exit();
+	return -1;
+}
+
+int symbol__init(struct symbol_conf *conf)
+{
+	const struct symbol_conf *pconf = conf ?: &symbol_conf__defaults;
+
 	elf_version(EV_CURRENT);
+	symbol__priv_size = pconf->priv_size;
+	thread__init(kthread, 0);
+
+	if (pconf->try_vmlinux_path && vmlinux_path__init() < 0)
+		return -1;
+
+	if (thread__create_kernel_map(kthread, pconf->vmlinux_name) < 0) {
+		vmlinux_path__exit();
+		return -1;
+	}
+
+	kthread->use_modules = pconf->use_modules;
+	if (pconf->use_modules && thread__create_module_maps(kthread) < 0)
+		pr_debug("Failed to load list of modules in use, "
+			 "continuing...\n");
+	/*
+	 * Now that we have all the maps created, just set the ->end of them:
+	 */
+	thread__fixup_maps_end(kthread);
+	return 0;
 }
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 829da9e..17003ef 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -1,11 +1,11 @@
-#ifndef _PERF_SYMBOL_
-#define _PERF_SYMBOL_ 1
+#ifndef __PERF_SYMBOL
+#define __PERF_SYMBOL 1
 
 #include <linux/types.h>
+#include <stdbool.h>
 #include "types.h"
 #include <linux/list.h>
 #include <linux/rbtree.h>
-#include "module.h"
 #include "event.h"
 
 #ifdef HAVE_CPLUS_DEMANGLE
@@ -46,57 +46,75 @@
 	struct rb_node	rb_node;
 	u64		start;
 	u64		end;
-	u64		obj_start;
-	u64		hist_sum;
-	u64		*hist;
-	struct module	*module;
-	void		*priv;
 	char		name[0];
 };
 
+struct symbol_conf {
+	unsigned short	priv_size;
+	bool		try_vmlinux_path,
+			use_modules;
+	const char	*vmlinux_name;
+};
+
+extern unsigned int symbol__priv_size;
+
+static inline void *symbol__priv(struct symbol *self)
+{
+	return ((void *)self) - symbol__priv_size;
+}
+
+struct addr_location {
+	struct thread *thread;
+	struct map    *map;
+	struct symbol *sym;
+	u64	      addr;
+	char	      level;
+};
+
 struct dso {
 	struct list_head node;
-	struct rb_root	 syms;
-	struct symbol    *(*find_symbol)(struct dso *, u64 ip);
-	unsigned int	 sym_priv_size;
-	unsigned char	 adjust_symbols;
-	unsigned char	 slen_calculated;
+	struct rb_root	 symbols[MAP__NR_TYPES];
+	struct symbol    *(*find_symbol)(struct dso *self,
+					 enum map_type type, u64 addr);
+	u8		 adjust_symbols:1;
+	u8		 slen_calculated:1;
+	u8		 has_build_id:1;
+	u8		 kernel:1;
 	unsigned char	 origin;
+	u8		 loaded;
+	u8		 build_id[BUILD_ID_SIZE];
+	u16		 long_name_len;
+	const char	 *short_name;
+	char	 	 *long_name;
 	char		 name[0];
 };
 
-extern const char *sym_hist_filter;
-
-typedef int (*symbol_filter_t)(struct dso *self, struct symbol *sym);
-
-struct dso *dso__new(const char *name, unsigned int sym_priv_size);
+struct dso *dso__new(const char *name);
 void dso__delete(struct dso *self);
 
-static inline void *dso__sym_priv(struct dso *self, struct symbol *sym)
-{
-	return ((void *)sym) - self->sym_priv_size;
-}
+bool dso__loaded(const struct dso *self, enum map_type type);
 
-struct symbol *dso__find_symbol(struct dso *self, u64 ip);
-
-int dso__load_kernel(struct dso *self, const char *vmlinux,
-		     symbol_filter_t filter, int verbose, int modules);
-int dso__load_modules(struct dso *self, symbol_filter_t filter, int verbose);
-int dso__load(struct dso *self, symbol_filter_t filter, int verbose);
 struct dso *dsos__findnew(const char *name);
+int dso__load(struct dso *self, struct map *map, symbol_filter_t filter);
 void dsos__fprintf(FILE *fp);
+size_t dsos__fprintf_buildid(FILE *fp);
 
-size_t dso__fprintf(struct dso *self, FILE *fp);
+size_t dso__fprintf_buildid(struct dso *self, FILE *fp);
+size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp);
 char dso__symtab_origin(const struct dso *self);
+void dso__set_build_id(struct dso *self, void *build_id);
 
-int load_kernel(void);
+int filename__read_build_id(const char *filename, void *bf, size_t size);
+int sysfs__read_build_id(const char *filename, void *bf, size_t size);
+bool dsos__read_build_ids(void);
+int build_id__sprintf(u8 *self, int len, char *bf);
 
-void symbol__init(void);
+size_t kernel_maps__fprintf(FILE *fp);
 
-extern struct list_head dsos;
-extern struct dso *kernel_dso;
+int symbol__init(struct symbol_conf *conf);
+
+struct thread;
+struct thread *kthread;
+extern struct list_head dsos__user, dsos__kernel;
 extern struct dso *vdso;
-extern struct dso *hypervisor_dso;
-extern const char *vmlinux_name;
-extern int   modules;
-#endif /* _PERF_SYMBOL_ */
+#endif /* __PERF_SYMBOL */
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 45efb5d..603f561 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -6,16 +6,29 @@
 #include "util.h"
 #include "debug.h"
 
+static struct rb_root threads;
+static struct thread *last_match;
+
+void thread__init(struct thread *self, pid_t pid)
+{
+	int i;
+	self->pid = pid;
+	self->comm = NULL;
+	for (i = 0; i < MAP__NR_TYPES; ++i) {
+		self->maps[i] = RB_ROOT;
+		INIT_LIST_HEAD(&self->removed_maps[i]);
+	}
+}
+
 static struct thread *thread__new(pid_t pid)
 {
-	struct thread *self = calloc(1, sizeof(*self));
+	struct thread *self = zalloc(sizeof(*self));
 
 	if (self != NULL) {
-		self->pid = pid;
+		thread__init(self, pid);
 		self->comm = malloc(32);
 		if (self->comm)
 			snprintf(self->comm, 32, ":%d", self->pid);
-		INIT_LIST_HEAD(&self->maps);
 	}
 
 	return self;
@@ -29,21 +42,84 @@
 	return self->comm ? 0 : -ENOMEM;
 }
 
-static size_t thread__fprintf(struct thread *self, FILE *fp)
+int thread__comm_len(struct thread *self)
 {
-	struct map *pos;
-	size_t ret = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
+	if (!self->comm_len) {
+		if (!self->comm)
+			return 0;
+		self->comm_len = strlen(self->comm);
+	}
 
-	list_for_each_entry(pos, &self->maps, node)
-		ret += map__fprintf(pos, fp);
-
-	return ret;
+	return self->comm_len;
 }
 
-struct thread *
-threads__findnew(pid_t pid, struct rb_root *threads, struct thread **last_match)
+static const char *map_type__name[MAP__NR_TYPES] = {
+	[MAP__FUNCTION] = "Functions",
+};
+
+static size_t __thread__fprintf_maps(struct thread *self,
+				     enum map_type type, FILE *fp)
 {
-	struct rb_node **p = &threads->rb_node;
+	size_t printed = fprintf(fp, "%s:\n", map_type__name[type]);
+	struct rb_node *nd;
+
+	for (nd = rb_first(&self->maps[type]); nd; nd = rb_next(nd)) {
+		struct map *pos = rb_entry(nd, struct map, rb_node);
+		printed += fprintf(fp, "Map:");
+		printed += map__fprintf(pos, fp);
+		if (verbose > 1) {
+			printed += dso__fprintf(pos->dso, type, fp);
+			printed += fprintf(fp, "--\n");
+		}
+	}
+
+	return printed;
+}
+
+size_t thread__fprintf_maps(struct thread *self, FILE *fp)
+{
+	size_t printed = 0, i;
+	for (i = 0; i < MAP__NR_TYPES; ++i)
+		printed += __thread__fprintf_maps(self, i, fp);
+	return printed;
+}
+
+static size_t __thread__fprintf_removed_maps(struct thread *self,
+					     enum map_type type, FILE *fp)
+{
+	struct map *pos;
+	size_t printed = 0;
+
+	list_for_each_entry(pos, &self->removed_maps[type], node) {
+		printed += fprintf(fp, "Map:");
+		printed += map__fprintf(pos, fp);
+		if (verbose > 1) {
+			printed += dso__fprintf(pos->dso, type, fp);
+			printed += fprintf(fp, "--\n");
+		}
+	}
+	return printed;
+}
+
+static size_t thread__fprintf_removed_maps(struct thread *self, FILE *fp)
+{
+	size_t printed = 0, i;
+	for (i = 0; i < MAP__NR_TYPES; ++i)
+		printed += __thread__fprintf_removed_maps(self, i, fp);
+	return printed;
+}
+
+static size_t thread__fprintf(struct thread *self, FILE *fp)
+{
+	size_t printed = fprintf(fp, "Thread %d %s\n", self->pid, self->comm);
+	printed += thread__fprintf_removed_maps(self, fp);
+	printed += fprintf(fp, "Removed maps:\n");
+	return printed + thread__fprintf_removed_maps(self, fp);
+}
+
+struct thread *threads__findnew(pid_t pid)
+{
+	struct rb_node **p = &threads.rb_node;
 	struct rb_node *parent = NULL;
 	struct thread *th;
 
@@ -52,15 +128,15 @@
 	 * so most of the time we dont have to look up
 	 * the full rbtree:
 	 */
-	if (*last_match && (*last_match)->pid == pid)
-		return *last_match;
+	if (last_match && last_match->pid == pid)
+		return last_match;
 
 	while (*p != NULL) {
 		parent = *p;
 		th = rb_entry(parent, struct thread, rb_node);
 
 		if (th->pid == pid) {
-			*last_match = th;
+			last_match = th;
 			return th;
 		}
 
@@ -73,17 +149,16 @@
 	th = thread__new(pid);
 	if (th != NULL) {
 		rb_link_node(&th->rb_node, parent, p);
-		rb_insert_color(&th->rb_node, threads);
-		*last_match = th;
+		rb_insert_color(&th->rb_node, &threads);
+		last_match = th;
 	}
 
 	return th;
 }
 
-struct thread *
-register_idle_thread(struct rb_root *threads, struct thread **last_match)
+struct thread *register_idle_thread(void)
 {
-	struct thread *thread = threads__findnew(0, threads, last_match);
+	struct thread *thread = threads__findnew(0);
 
 	if (!thread || thread__set_comm(thread, "swapper")) {
 		fprintf(stderr, "problem inserting idle task.\n");
@@ -93,42 +168,97 @@
 	return thread;
 }
 
-void thread__insert_map(struct thread *self, struct map *map)
+static void thread__remove_overlappings(struct thread *self, struct map *map)
 {
-	struct map *pos, *tmp;
+	struct rb_root *root = &self->maps[map->type];
+	struct rb_node *next = rb_first(root);
 
-	list_for_each_entry_safe(pos, tmp, &self->maps, node) {
-		if (map__overlap(pos, map)) {
-			if (verbose >= 2) {
-				printf("overlapping maps:\n");
-				map__fprintf(map, stdout);
-				map__fprintf(pos, stdout);
-			}
+	while (next) {
+		struct map *pos = rb_entry(next, struct map, rb_node);
+		next = rb_next(&pos->rb_node);
 
-			if (map->start <= pos->start && map->end > pos->start)
-				pos->start = map->end;
+		if (!map__overlap(pos, map))
+			continue;
 
-			if (map->end >= pos->end && map->start < pos->end)
-				pos->end = map->start;
-
-			if (verbose >= 2) {
-				printf("after collision:\n");
-				map__fprintf(pos, stdout);
-			}
-
-			if (pos->start >= pos->end) {
-				list_del_init(&pos->node);
-				free(pos);
-			}
+		if (verbose >= 2) {
+			fputs("overlapping maps:\n", stderr);
+			map__fprintf(map, stderr);
+			map__fprintf(pos, stderr);
 		}
+
+		rb_erase(&pos->rb_node, root);
+		/*
+		 * We may have references to this map, for instance in some
+		 * hist_entry instances, so just move them to a separate
+		 * list.
+		 */
+		list_add_tail(&pos->node, &self->removed_maps[map->type]);
+	}
+}
+
+void maps__insert(struct rb_root *maps, struct map *map)
+{
+	struct rb_node **p = &maps->rb_node;
+	struct rb_node *parent = NULL;
+	const u64 ip = map->start;
+	struct map *m;
+
+	while (*p != NULL) {
+		parent = *p;
+		m = rb_entry(parent, struct map, rb_node);
+		if (ip < m->start)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
 	}
 
-	list_add_tail(&map->node, &self->maps);
+	rb_link_node(&map->rb_node, parent, p);
+	rb_insert_color(&map->rb_node, maps);
+}
+
+struct map *maps__find(struct rb_root *maps, u64 ip)
+{
+	struct rb_node **p = &maps->rb_node;
+	struct rb_node *parent = NULL;
+	struct map *m;
+
+	while (*p != NULL) {
+		parent = *p;
+		m = rb_entry(parent, struct map, rb_node);
+		if (ip < m->start)
+			p = &(*p)->rb_left;
+		else if (ip > m->end)
+			p = &(*p)->rb_right;
+		else
+			return m;
+	}
+
+	return NULL;
+}
+
+void thread__insert_map(struct thread *self, struct map *map)
+{
+	thread__remove_overlappings(self, map);
+	maps__insert(&self->maps[map->type], map);
+}
+
+static int thread__clone_maps(struct thread *self, struct thread *parent,
+			      enum map_type type)
+{
+	struct rb_node *nd;
+	for (nd = rb_first(&parent->maps[type]); nd; nd = rb_next(nd)) {
+		struct map *map = rb_entry(nd, struct map, rb_node);
+		struct map *new = map__clone(map);
+		if (new == NULL)
+			return -ENOMEM;
+		thread__insert_map(self, new);
+	}
+	return 0;
 }
 
 int thread__fork(struct thread *self, struct thread *parent)
 {
-	struct map *map;
+	int i;
 
 	if (self->comm)
 		free(self->comm);
@@ -136,36 +266,18 @@
 	if (!self->comm)
 		return -ENOMEM;
 
-	list_for_each_entry(map, &parent->maps, node) {
-		struct map *new = map__clone(map);
-		if (!new)
+	for (i = 0; i < MAP__NR_TYPES; ++i)
+		if (thread__clone_maps(self, parent, i) < 0)
 			return -ENOMEM;
-		thread__insert_map(self, new);
-	}
-
 	return 0;
 }
 
-struct map *thread__find_map(struct thread *self, u64 ip)
-{
-	struct map *pos;
-
-	if (self == NULL)
-		return NULL;
-
-	list_for_each_entry(pos, &self->maps, node)
-		if (ip >= pos->start && ip <= pos->end)
-			return pos;
-
-	return NULL;
-}
-
-size_t threads__fprintf(FILE *fp, struct rb_root *threads)
+size_t threads__fprintf(FILE *fp)
 {
 	size_t ret = 0;
 	struct rb_node *nd;
 
-	for (nd = rb_first(threads); nd; nd = rb_next(nd)) {
+	for (nd = rb_first(&threads); nd; nd = rb_next(nd)) {
 		struct thread *pos = rb_entry(nd, struct thread, rb_node);
 
 		ret += thread__fprintf(pos, fp);
@@ -173,3 +285,15 @@
 
 	return ret;
 }
+
+struct symbol *thread__find_symbol(struct thread *self,
+				   enum map_type type, u64 addr,
+				   symbol_filter_t filter)
+{
+	struct map *map = thread__find_map(self, type, addr);
+
+	if (map != NULL)
+		return map__find_symbol(map, map->map_ip(map, addr), filter);
+
+	return NULL;
+}
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 32aea3c..686d6e9 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -1,22 +1,56 @@
+#ifndef __PERF_THREAD_H
+#define __PERF_THREAD_H
+
 #include <linux/rbtree.h>
-#include <linux/list.h>
 #include <unistd.h>
 #include "symbol.h"
 
 struct thread {
 	struct rb_node		rb_node;
-	struct list_head	maps;
+	struct rb_root		maps[MAP__NR_TYPES];
+	struct list_head	removed_maps[MAP__NR_TYPES];
 	pid_t			pid;
+	bool			use_modules;
 	char			shortname[3];
 	char			*comm;
+	int			comm_len;
 };
 
+void thread__init(struct thread *self, pid_t pid);
 int thread__set_comm(struct thread *self, const char *comm);
-struct thread *
-threads__findnew(pid_t pid, struct rb_root *threads, struct thread **last_match);
-struct thread *
-register_idle_thread(struct rb_root *threads, struct thread **last_match);
+int thread__comm_len(struct thread *self);
+struct thread *threads__findnew(pid_t pid);
+struct thread *register_idle_thread(void);
 void thread__insert_map(struct thread *self, struct map *map);
 int thread__fork(struct thread *self, struct thread *parent);
-struct map *thread__find_map(struct thread *self, u64 ip);
-size_t threads__fprintf(FILE *fp, struct rb_root *threads);
+size_t thread__fprintf_maps(struct thread *self, FILE *fp);
+size_t threads__fprintf(FILE *fp);
+
+void maps__insert(struct rb_root *maps, struct map *map);
+struct map *maps__find(struct rb_root *maps, u64 addr);
+
+static inline struct map *thread__find_map(struct thread *self,
+					   enum map_type type, u64 addr)
+{
+	return self ? maps__find(&self->maps[type], addr) : NULL;
+}
+
+static inline void __thread__insert_map(struct thread *self, struct map *map)
+{
+	 maps__insert(&self->maps[map->type], map);
+}
+
+void thread__find_addr_location(struct thread *self, u8 cpumode,
+				enum map_type type, u64 addr,
+				struct addr_location *al,
+				symbol_filter_t filter);
+struct symbol *thread__find_symbol(struct thread *self,
+				   enum map_type type, u64 addr,
+				   symbol_filter_t filter);
+
+static inline struct symbol *
+thread__find_function(struct thread *self, u64 addr, symbol_filter_t filter)
+{
+	return thread__find_symbol(self, MAP__FUNCTION, addr, filter);
+}
+#endif	/* __PERF_THREAD_H */
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
index af4b057..cace355 100644
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -33,11 +33,11 @@
 #include <ctype.h>
 #include <errno.h>
 #include <stdbool.h>
+#include <linux/kernel.h>
 
 #include "../perf.h"
 #include "trace-event.h"
 
-
 #define VERSION "0.5"
 
 #define _STR(x) #x
@@ -483,27 +483,33 @@
 get_tracepoints_path(struct perf_event_attr *pattrs, int nb_events)
 {
 	struct tracepoint_path path, *ppath = &path;
-	int i;
+	int i, nr_tracepoints = 0;
 
 	for (i = 0; i < nb_events; i++) {
 		if (pattrs[i].type != PERF_TYPE_TRACEPOINT)
 			continue;
+		++nr_tracepoints;
 		ppath->next = tracepoint_id_to_path(pattrs[i].config);
 		if (!ppath->next)
 			die("%s\n", "No memory to alloc tracepoints list");
 		ppath = ppath->next;
 	}
 
-	return path.next;
+	return nr_tracepoints > 0 ? path.next : NULL;
 }
-void read_tracing_data(struct perf_event_attr *pattrs, int nb_events)
+
+int read_tracing_data(int fd, struct perf_event_attr *pattrs, int nb_events)
 {
 	char buf[BUFSIZ];
-	struct tracepoint_path *tps;
+	struct tracepoint_path *tps = get_tracepoints_path(pattrs, nb_events);
 
-	output_fd = open(output_file, O_WRONLY | O_CREAT | O_TRUNC | O_LARGEFILE, 0644);
-	if (output_fd < 0)
-		die("creating file '%s'", output_file);
+	/*
+	 * What? No tracepoints? No sense writing anything here, bail out.
+	 */
+	if (tps == NULL)
+		return -1;
+
+	output_fd = fd;
 
 	buf[0] = 23;
 	buf[1] = 8;
@@ -530,11 +536,11 @@
 	page_size = getpagesize();
 	write_or_die(&page_size, 4);
 
-	tps = get_tracepoints_path(pattrs, nb_events);
-
 	read_header_files();
 	read_ftrace_files(tps);
 	read_event_files(tps);
 	read_proc_kallsyms();
 	read_ftrace_printk();
+
+	return 0;
 }
diff --git a/tools/perf/util/trace-event-parse.c b/tools/perf/util/trace-event-parse.c
index 55c9659..0302405 100644
--- a/tools/perf/util/trace-event-parse.c
+++ b/tools/perf/util/trace-event-parse.c
@@ -40,12 +40,19 @@
 int header_page_data_offset;
 int header_page_data_size;
 
+int latency_format;
+
 static char *input_buf;
 static unsigned long long input_buf_ptr;
 static unsigned long long input_buf_siz;
 
 static int cpus;
 static int long_size;
+static int is_flag_field;
+static int is_symbolic_field;
+
+static struct format_field *
+find_any_field(struct event *event, const char *name);
 
 static void init_input_buf(char *buf, unsigned long long size)
 {
@@ -284,18 +291,19 @@
 	char *line;
 	char *next = NULL;
 	char *addr_str;
-	int ret;
 	int i;
 
 	line = strtok_r(file, "\n", &next);
 	while (line) {
+		addr_str = strsep(&line, ":");
+		if (!line) {
+			warning("error parsing print strings");
+			break;
+		}
 		item = malloc_or_die(sizeof(*item));
-		ret = sscanf(line, "%as : %as",
-			     (float *)(void *)&addr_str, /* workaround gcc warning */
-			     (float *)(void *)&item->printk);
 		item->addr = strtoull(addr_str, NULL, 16);
-		free(addr_str);
-
+		/* fmt still has a space, skip it */
+		item->printk = strdup(line+1);
 		item->next = list;
 		list = item;
 		line = strtok_r(NULL, "\n", &next);
@@ -522,7 +530,10 @@
 			last_ch = ch;
 			ch = __read_char();
 			buf[i++] = ch;
-		} while (ch != quote_ch && last_ch != '\\');
+			/* the '\' '\' will cancel itself */
+			if (ch == '\\' && last_ch == '\\')
+				last_ch = 0;
+		} while (ch != quote_ch || last_ch == '\\');
 		/* remove the last quote */
 		i--;
 		goto out;
@@ -610,7 +621,7 @@
 static int test_type(enum event_type type, enum event_type expect)
 {
 	if (type != expect) {
-		die("Error: expected type %d but read %d",
+		warning("Error: expected type %d but read %d",
 		    expect, type);
 		return -1;
 	}
@@ -621,13 +632,13 @@
 		    enum event_type expect, const char *expect_tok)
 {
 	if (type != expect) {
-		die("Error: expected type %d but read %d",
+		warning("Error: expected type %d but read %d",
 		    expect, type);
 		return -1;
 	}
 
 	if (strcmp(token, expect_tok) != 0) {
-		die("Error: expected '%s' but read '%s'",
+		warning("Error: expected '%s' but read '%s'",
 		    expect_tok, token);
 		return -1;
 	}
@@ -665,7 +676,7 @@
 
 	free_token(token);
 
-	return 0;
+	return ret;
 }
 
 static int read_expected(enum event_type expect, const char *str)
@@ -682,10 +693,10 @@
 {
 	char *token;
 
-	if (read_expected(EVENT_ITEM, (char *)"name") < 0)
+	if (read_expected(EVENT_ITEM, "name") < 0)
 		return NULL;
 
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return NULL;
 
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
@@ -703,10 +714,10 @@
 	char *token;
 	int id;
 
-	if (read_expected_item(EVENT_ITEM, (char *)"ID") < 0)
+	if (read_expected_item(EVENT_ITEM, "ID") < 0)
 		return -1;
 
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return -1;
 
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
@@ -721,6 +732,24 @@
 	return -1;
 }
 
+static int field_is_string(struct format_field *field)
+{
+	if ((field->flags & FIELD_IS_ARRAY) &&
+	    (!strstr(field->type, "char") || !strstr(field->type, "u8") ||
+	     !strstr(field->type, "s8")))
+		return 1;
+
+	return 0;
+}
+
+static int field_is_dynamic(struct format_field *field)
+{
+	if (!strcmp(field->type, "__data_loc"))
+		return 1;
+
+	return 0;
+}
+
 static int event_read_fields(struct event *event, struct format_field **fields)
 {
 	struct format_field *field = NULL;
@@ -738,7 +767,7 @@
 
 		count++;
 
-		if (test_type_token(type, token, EVENT_ITEM, (char *)"field"))
+		if (test_type_token(type, token, EVENT_ITEM, "field"))
 			goto fail;
 		free_token(token);
 
@@ -753,7 +782,7 @@
 			type = read_token(&token);
 		}
 
-		if (test_type_token(type, token, EVENT_OP, (char *)":") < 0)
+		if (test_type_token(type, token, EVENT_OP, ":") < 0)
 			return -1;
 
 		if (read_expect_type(EVENT_ITEM, &token) < 0)
@@ -865,14 +894,20 @@
 			free(brackets);
 		}
 
-		if (test_type_token(type, token,  EVENT_OP, (char *)";"))
+		if (field_is_string(field)) {
+			field->flags |= FIELD_IS_STRING;
+			if (field_is_dynamic(field))
+				field->flags |= FIELD_IS_DYNAMIC;
+		}
+
+		if (test_type_token(type, token,  EVENT_OP, ";"))
 			goto fail;
 		free_token(token);
 
-		if (read_expected(EVENT_ITEM, (char *)"offset") < 0)
+		if (read_expected(EVENT_ITEM, "offset") < 0)
 			goto fail_expect;
 
-		if (read_expected(EVENT_OP, (char *)":") < 0)
+		if (read_expected(EVENT_OP, ":") < 0)
 			goto fail_expect;
 
 		if (read_expect_type(EVENT_ITEM, &token))
@@ -880,13 +915,13 @@
 		field->offset = strtoul(token, NULL, 0);
 		free_token(token);
 
-		if (read_expected(EVENT_OP, (char *)";") < 0)
+		if (read_expected(EVENT_OP, ";") < 0)
 			goto fail_expect;
 
-		if (read_expected(EVENT_ITEM, (char *)"size") < 0)
+		if (read_expected(EVENT_ITEM, "size") < 0)
 			goto fail_expect;
 
-		if (read_expected(EVENT_OP, (char *)":") < 0)
+		if (read_expected(EVENT_OP, ":") < 0)
 			goto fail_expect;
 
 		if (read_expect_type(EVENT_ITEM, &token))
@@ -894,11 +929,34 @@
 		field->size = strtoul(token, NULL, 0);
 		free_token(token);
 
-		if (read_expected(EVENT_OP, (char *)";") < 0)
+		if (read_expected(EVENT_OP, ";") < 0)
 			goto fail_expect;
 
-		if (read_expect_type(EVENT_NEWLINE, &token) < 0)
-			goto fail;
+		type = read_token(&token);
+		if (type != EVENT_NEWLINE) {
+			/* newer versions of the kernel have a "signed" type */
+			if (test_type_token(type, token, EVENT_ITEM, "signed"))
+				goto fail;
+
+			free_token(token);
+
+			if (read_expected(EVENT_OP, ":") < 0)
+				goto fail_expect;
+
+			if (read_expect_type(EVENT_ITEM, &token))
+				goto fail;
+
+			if (strtoul(token, NULL, 0))
+				field->flags |= FIELD_IS_SIGNED;
+
+			free_token(token);
+			if (read_expected(EVENT_OP, ";") < 0)
+				goto fail_expect;
+
+			if (read_expect_type(EVENT_NEWLINE, &token))
+				goto fail;
+		}
+
 		free_token(token);
 
 		*fields = field;
@@ -921,10 +979,10 @@
 	char *token;
 	int ret;
 
-	if (read_expected_item(EVENT_ITEM, (char *)"format") < 0)
+	if (read_expected_item(EVENT_ITEM, "format") < 0)
 		return -1;
 
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return -1;
 
 	if (read_expect_type(EVENT_NEWLINE, &token))
@@ -984,7 +1042,7 @@
 
 	*tok = NULL;
 	type = process_arg(event, left, &token);
-	if (test_type_token(type, token, EVENT_OP, (char *)":"))
+	if (test_type_token(type, token, EVENT_OP, ":"))
 		goto out_free;
 
 	arg->op.op = token;
@@ -1004,6 +1062,35 @@
 	return EVENT_ERROR;
 }
 
+static enum event_type
+process_array(struct event *event, struct print_arg *top, char **tok)
+{
+	struct print_arg *arg;
+	enum event_type type;
+	char *token = NULL;
+
+	arg = malloc_or_die(sizeof(*arg));
+	memset(arg, 0, sizeof(*arg));
+
+	*tok = NULL;
+	type = process_arg(event, arg, &token);
+	if (test_type_token(type, token, EVENT_OP, "]"))
+		goto out_free;
+
+	top->op.right = arg;
+
+	free_token(token);
+	type = read_token_item(&token);
+	*tok = token;
+
+	return type;
+
+out_free:
+	free_token(*tok);
+	free_arg(arg);
+	return EVENT_ERROR;
+}
+
 static int get_op_prio(char *op)
 {
 	if (!op[1]) {
@@ -1128,6 +1215,8 @@
 		   strcmp(token, "*") == 0 ||
 		   strcmp(token, "^") == 0 ||
 		   strcmp(token, "/") == 0 ||
+		   strcmp(token, "<") == 0 ||
+		   strcmp(token, ">") == 0 ||
 		   strcmp(token, "==") == 0 ||
 		   strcmp(token, "!=") == 0) {
 
@@ -1144,17 +1233,46 @@
 
 		right = malloc_or_die(sizeof(*right));
 
-		type = process_arg(event, right, tok);
+		type = read_token_item(&token);
+		*tok = token;
+
+		/* could just be a type pointer */
+		if ((strcmp(arg->op.op, "*") == 0) &&
+		    type == EVENT_DELIM && (strcmp(token, ")") == 0)) {
+			if (left->type != PRINT_ATOM)
+				die("bad pointer type");
+			left->atom.atom = realloc(left->atom.atom,
+					    sizeof(left->atom.atom) + 3);
+			strcat(left->atom.atom, " *");
+			*arg = *left;
+			free(arg);
+
+			return type;
+		}
+
+		type = process_arg_token(event, right, tok, type);
 
 		arg->op.right = right;
 
+	} else if (strcmp(token, "[") == 0) {
+
+		left = malloc_or_die(sizeof(*left));
+		*left = *arg;
+
+		arg->type = PRINT_OP;
+		arg->op.op = token;
+		arg->op.left = left;
+
+		arg->op.prio = 0;
+		type = process_array(event, arg, tok);
+
 	} else {
-		die("unknown op '%s'", token);
+		warning("unknown op '%s'", token);
+		event->flags |= EVENT_FL_FAILED;
 		/* the arg is now the left side */
 		return EVENT_NONE;
 	}
 
-
 	if (type == EVENT_OP) {
 		int prio;
 
@@ -1178,7 +1296,7 @@
 	char *field;
 	char *token;
 
-	if (read_expected(EVENT_OP, (char *)"->") < 0)
+	if (read_expected(EVENT_OP, "->") < 0)
 		return EVENT_ERROR;
 
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
@@ -1188,6 +1306,16 @@
 	arg->type = PRINT_FIELD;
 	arg->field.name = field;
 
+	if (is_flag_field) {
+		arg->field.field = find_any_field(event, arg->field.name);
+		arg->field.field->flags |= FIELD_IS_FLAG;
+		is_flag_field = 0;
+	} else if (is_symbolic_field) {
+		arg->field.field = find_any_field(event, arg->field.name);
+		arg->field.field->flags |= FIELD_IS_SYMBOLIC;
+		is_symbolic_field = 0;
+	}
+
 	type = read_token(&token);
 	*tok = token;
 
@@ -1338,14 +1466,14 @@
 	do {
 		free_token(token);
 		type = read_token_item(&token);
-		if (test_type_token(type, token, EVENT_OP, (char *)"{"))
+		if (test_type_token(type, token, EVENT_OP, "{"))
 			break;
 
 		arg = malloc_or_die(sizeof(*arg));
 
 		free_token(token);
 		type = process_arg(event, arg, &token);
-		if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+		if (test_type_token(type, token, EVENT_DELIM, ","))
 			goto out_free;
 
 		field = malloc_or_die(sizeof(*field));
@@ -1356,7 +1484,7 @@
 
 		free_token(token);
 		type = process_arg(event, arg, &token);
-		if (test_type_token(type, token, EVENT_OP, (char *)"}"))
+		if (test_type_token(type, token, EVENT_OP, "}"))
 			goto out_free;
 
 		value = arg_eval(arg);
@@ -1391,13 +1519,13 @@
 	memset(arg, 0, sizeof(*arg));
 	arg->type = PRINT_FLAGS;
 
-	if (read_expected_item(EVENT_DELIM, (char *)"(") < 0)
+	if (read_expected_item(EVENT_DELIM, "(") < 0)
 		return EVENT_ERROR;
 
 	field = malloc_or_die(sizeof(*field));
 
 	type = process_arg(event, field, &token);
-	if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+	if (test_type_token(type, token, EVENT_DELIM, ","))
 		goto out_free;
 
 	arg->flags.field = field;
@@ -1408,11 +1536,11 @@
 		type = read_token_item(&token);
 	}
 
-	if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+	if (test_type_token(type, token, EVENT_DELIM, ","))
 		goto out_free;
 
 	type = process_fields(event, &arg->flags.flags, &token);
-	if (test_type_token(type, token, EVENT_DELIM, (char *)")"))
+	if (test_type_token(type, token, EVENT_DELIM, ")"))
 		goto out_free;
 
 	free_token(token);
@@ -1434,19 +1562,19 @@
 	memset(arg, 0, sizeof(*arg));
 	arg->type = PRINT_SYMBOL;
 
-	if (read_expected_item(EVENT_DELIM, (char *)"(") < 0)
+	if (read_expected_item(EVENT_DELIM, "(") < 0)
 		return EVENT_ERROR;
 
 	field = malloc_or_die(sizeof(*field));
 
 	type = process_arg(event, field, &token);
-	if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+	if (test_type_token(type, token, EVENT_DELIM, ","))
 		goto out_free;
 
 	arg->symbol.field = field;
 
 	type = process_fields(event, &arg->symbol.symbols, &token);
-	if (test_type_token(type, token, EVENT_DELIM, (char *)")"))
+	if (test_type_token(type, token, EVENT_DELIM, ")"))
 		goto out_free;
 
 	free_token(token);
@@ -1463,7 +1591,6 @@
 {
 	struct print_arg *item_arg;
 	enum event_type type;
-	int ptr_cast = 0;
 	char *token;
 
 	type = process_arg(event, arg, &token);
@@ -1471,28 +1598,13 @@
 	if (type == EVENT_ERROR)
 		return EVENT_ERROR;
 
-	if (type == EVENT_OP) {
-		/* handle the ptr casts */
-		if (!strcmp(token, "*")) {
-			/*
-			 * FIXME: should we zapp whitespaces before ')' ?
-			 * (may require a peek_token_item())
-			 */
-			if (__peek_char() == ')') {
-				ptr_cast = 1;
-				free_token(token);
-				type = read_token_item(&token);
-			}
-		}
-		if (!ptr_cast) {
-			type = process_op(event, arg, &token);
+	if (type == EVENT_OP)
+		type = process_op(event, arg, &token);
 
-			if (type == EVENT_ERROR)
-				return EVENT_ERROR;
-		}
-	}
+	if (type == EVENT_ERROR)
+		return EVENT_ERROR;
 
-	if (test_type_token(type, token, EVENT_DELIM, (char *)")")) {
+	if (test_type_token(type, token, EVENT_DELIM, ")")) {
 		free_token(token);
 		return EVENT_ERROR;
 	}
@@ -1516,13 +1628,6 @@
 		item_arg = malloc_or_die(sizeof(*item_arg));
 
 		arg->type = PRINT_TYPE;
-		if (ptr_cast) {
-			char *old = arg->atom.atom;
-
-			arg->atom.atom = malloc_or_die(strlen(old + 3));
-			sprintf(arg->atom.atom, "%s *", old);
-			free(old);
-		}
 		arg->typecast.type = arg->atom.atom;
 		arg->typecast.item = item_arg;
 		type = process_arg_token(event, item_arg, &token, type);
@@ -1540,7 +1645,7 @@
 	enum event_type type;
 	char *token;
 
-	if (read_expected(EVENT_DELIM, (char *)"(") < 0)
+	if (read_expected(EVENT_DELIM, "(") < 0)
 		return EVENT_ERROR;
 
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
@@ -1550,7 +1655,7 @@
 	arg->string.string = token;
 	arg->string.offset = -1;
 
-	if (read_expected(EVENT_DELIM, (char *)")") < 0)
+	if (read_expected(EVENT_DELIM, ")") < 0)
 		return EVENT_ERROR;
 
 	type = read_token(&token);
@@ -1578,9 +1683,11 @@
 			type = process_entry(event, arg, &token);
 		} else if (strcmp(token, "__print_flags") == 0) {
 			free_token(token);
+			is_flag_field = 1;
 			type = process_flags(event, arg, &token);
 		} else if (strcmp(token, "__print_symbolic") == 0) {
 			free_token(token);
+			is_symbolic_field = 1;
 			type = process_symbols(event, arg, &token);
 		} else if (strcmp(token, "__get_str") == 0) {
 			free_token(token);
@@ -1637,12 +1744,18 @@
 
 static int event_read_print_args(struct event *event, struct print_arg **list)
 {
-	enum event_type type;
+	enum event_type type = EVENT_ERROR;
 	struct print_arg *arg;
 	char *token;
 	int args = 0;
 
 	do {
+		if (type == EVENT_NEWLINE) {
+			free_token(token);
+			type = read_token_item(&token);
+			continue;
+		}
+
 		arg = malloc_or_die(sizeof(*arg));
 		memset(arg, 0, sizeof(*arg));
 
@@ -1683,18 +1796,19 @@
 	char *token;
 	int ret;
 
-	if (read_expected_item(EVENT_ITEM, (char *)"print") < 0)
+	if (read_expected_item(EVENT_ITEM, "print") < 0)
 		return -1;
 
-	if (read_expected(EVENT_ITEM, (char *)"fmt") < 0)
+	if (read_expected(EVENT_ITEM, "fmt") < 0)
 		return -1;
 
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return -1;
 
 	if (read_expect_type(EVENT_DQUOTE, &token) < 0)
 		goto fail;
 
+ concat:
 	event->print_fmt.format = token;
 	event->print_fmt.args = NULL;
 
@@ -1704,7 +1818,22 @@
 	if (type == EVENT_NONE)
 		return 0;
 
-	if (test_type_token(type, token, EVENT_DELIM, (char *)","))
+	/* Handle concatination of print lines */
+	if (type == EVENT_DQUOTE) {
+		char *cat;
+
+		cat = malloc_or_die(strlen(event->print_fmt.format) +
+				    strlen(token) + 1);
+		strcpy(cat, event->print_fmt.format);
+		strcat(cat, token);
+		free_token(token);
+		free_token(event->print_fmt.format);
+		event->print_fmt.format = NULL;
+		token = cat;
+		goto concat;
+	}
+
+	if (test_type_token(type, token, EVENT_DELIM, ","))
 		goto fail;
 
 	free_token(token);
@@ -1713,7 +1842,7 @@
 	if (ret < 0)
 		return -1;
 
-	return 0;
+	return ret;
 
  fail:
 	free_token(token);
@@ -1759,7 +1888,7 @@
 	return find_field(event, name);
 }
 
-static unsigned long long read_size(void *ptr, int size)
+unsigned long long read_size(void *ptr, int size)
 {
 	switch (size) {
 	case 1:
@@ -1822,37 +1951,67 @@
 	return 0;
 }
 
+static int __parse_common(void *data, int *size, int *offset,
+			  const char *name)
+{
+	int ret;
+
+	if (!*size) {
+		ret = get_common_info(name, offset, size);
+		if (ret < 0)
+			return ret;
+	}
+	return read_size(data + *offset, *size);
+}
+
 int trace_parse_common_type(void *data)
 {
 	static int type_offset;
 	static int type_size;
-	int ret;
 
-	if (!type_size) {
-		ret = get_common_info("common_type",
-				      &type_offset,
-				      &type_size);
-		if (ret < 0)
-			return ret;
-	}
-	return read_size(data + type_offset, type_size);
+	return __parse_common(data, &type_size, &type_offset,
+			      "common_type");
 }
 
-static int parse_common_pid(void *data)
+int trace_parse_common_pid(void *data)
 {
 	static int pid_offset;
 	static int pid_size;
+
+	return __parse_common(data, &pid_size, &pid_offset,
+			      "common_pid");
+}
+
+int parse_common_pc(void *data)
+{
+	static int pc_offset;
+	static int pc_size;
+
+	return __parse_common(data, &pc_size, &pc_offset,
+			      "common_preempt_count");
+}
+
+int parse_common_flags(void *data)
+{
+	static int flags_offset;
+	static int flags_size;
+
+	return __parse_common(data, &flags_size, &flags_offset,
+			      "common_flags");
+}
+
+int parse_common_lock_depth(void *data)
+{
+	static int ld_offset;
+	static int ld_size;
 	int ret;
 
-	if (!pid_size) {
-		ret = get_common_info("common_pid",
-				      &pid_offset,
-				      &pid_size);
-		if (ret < 0)
-			return ret;
-	}
+	ret = __parse_common(data, &ld_size, &ld_offset,
+			     "common_lock_depth");
+	if (ret < 0)
+		return -1;
 
-	return read_size(data + pid_offset, pid_size);
+	return ret;
 }
 
 struct event *trace_find_event(int id)
@@ -1866,11 +2025,20 @@
 	return event;
 }
 
+struct event *trace_find_next_event(struct event *event)
+{
+	if (!event)
+		return event_list;
+
+	return event->next;
+}
+
 static unsigned long long eval_num_arg(void *data, int size,
 				   struct event *event, struct print_arg *arg)
 {
 	unsigned long long val = 0;
 	unsigned long long left, right;
+	struct print_arg *larg;
 
 	switch (arg->type) {
 	case PRINT_NULL:
@@ -1897,6 +2065,26 @@
 		return 0;
 		break;
 	case PRINT_OP:
+		if (strcmp(arg->op.op, "[") == 0) {
+			/*
+			 * Arrays are special, since we don't want
+			 * to read the arg as is.
+			 */
+			if (arg->op.left->type != PRINT_FIELD)
+				goto default_op; /* oops, all bets off */
+			larg = arg->op.left;
+			if (!larg->field.field) {
+				larg->field.field =
+					find_any_field(event, larg->field.name);
+				if (!larg->field.field)
+					die("field %s not found", larg->field.name);
+			}
+			right = eval_num_arg(data, size, event, arg->op.right);
+			val = read_size(data + larg->field.field->offset +
+					right * long_size, long_size);
+			break;
+		}
+ default_op:
 		left = eval_num_arg(data, size, event, arg->op.left);
 		right = eval_num_arg(data, size, event, arg->op.right);
 		switch (arg->op.op[0]) {
@@ -1947,6 +2135,12 @@
 				die("unknown op '%s'", arg->op.op);
 			val = left == right;
 			break;
+		case '-':
+			val = left - right;
+			break;
+		case '+':
+			val = left + right;
+			break;
 		default:
 			die("unknown op '%s'", arg->op.op);
 		}
@@ -1978,7 +2172,7 @@
 	{ "HRTIMER_RESTART", 1 },
 };
 
-static unsigned long long eval_flag(const char *flag)
+unsigned long long eval_flag(const char *flag)
 {
 	int i;
 
@@ -2145,8 +2339,9 @@
 			case 'u':
 			case 'x':
 			case 'i':
-				bptr = (void *)(((unsigned long)bptr + (long_size - 1)) &
-						~(long_size - 1));
+				/* the pointers are always 4 bytes aligned */
+				bptr = (void *)(((unsigned long)bptr + 3) &
+						~3);
 				switch (ls) {
 				case 0:
 				case 1:
@@ -2270,7 +2465,27 @@
 
 	for (; *ptr; ptr++) {
 		ls = 0;
-		if (*ptr == '%') {
+		if (*ptr == '\\') {
+			ptr++;
+			switch (*ptr) {
+			case 'n':
+				printf("\n");
+				break;
+			case 't':
+				printf("\t");
+				break;
+			case 'r':
+				printf("\r");
+				break;
+			case '\\':
+				printf("\\");
+				break;
+			default:
+				printf("%c", *ptr);
+				break;
+			}
+
+		} else if (*ptr == '%') {
 			saveptr = ptr;
 			show_func = 0;
  cont_process:
@@ -2377,6 +2592,41 @@
 	return 1;
 }
 
+static void print_lat_fmt(void *data, int size __unused)
+{
+	unsigned int lat_flags;
+	unsigned int pc;
+	int lock_depth;
+	int hardirq;
+	int softirq;
+
+	lat_flags = parse_common_flags(data);
+	pc = parse_common_pc(data);
+	lock_depth = parse_common_lock_depth(data);
+
+	hardirq = lat_flags & TRACE_FLAG_HARDIRQ;
+	softirq = lat_flags & TRACE_FLAG_SOFTIRQ;
+
+	printf("%c%c%c",
+	       (lat_flags & TRACE_FLAG_IRQS_OFF) ? 'd' :
+	       (lat_flags & TRACE_FLAG_IRQS_NOSUPPORT) ?
+	       'X' : '.',
+	       (lat_flags & TRACE_FLAG_NEED_RESCHED) ?
+	       'N' : '.',
+	       (hardirq && softirq) ? 'H' :
+	       hardirq ? 'h' : softirq ? 's' : '.');
+
+	if (pc)
+		printf("%x", pc);
+	else
+		printf(".");
+
+	if (lock_depth < 0)
+		printf(".");
+	else
+		printf("%d", lock_depth);
+}
+
 /* taken from Linux, written by Frederic Weisbecker */
 static void print_graph_cpu(int cpu)
 {
@@ -2452,7 +2702,7 @@
 	if (!(event->flags & EVENT_FL_ISFUNCRET))
 		return NULL;
 
-	pid = parse_common_pid(next->data);
+	pid = trace_parse_common_pid(next->data);
 	field = find_field(event, "func");
 	if (!field)
 		die("function return does not have field func");
@@ -2620,6 +2870,11 @@
 
 	printf(" | ");
 
+	if (latency_format) {
+		print_lat_fmt(data, size);
+		printf(" | ");
+	}
+
 	field = find_field(event, "func");
 	if (!field)
 		die("function entry does not have func field");
@@ -2663,6 +2918,11 @@
 
 	printf(" | ");
 
+	if (latency_format) {
+		print_lat_fmt(data, size);
+		printf(" | ");
+	}
+
 	field = find_field(event, "rettime");
 	if (!field)
 		die("can't find rettime in return graph");
@@ -2724,19 +2984,30 @@
 
 	event = trace_find_event(type);
 	if (!event) {
-		printf("ug! no event found for type %d\n", type);
+		warning("ug! no event found for type %d", type);
 		return;
 	}
 
-	pid = parse_common_pid(data);
+	pid = trace_parse_common_pid(data);
 
 	if (event->flags & (EVENT_FL_ISFUNCENT | EVENT_FL_ISFUNCRET))
 		return pretty_print_func_graph(data, size, event, cpu,
 					       pid, comm, secs, usecs);
 
-	printf("%16s-%-5d [%03d] %5lu.%09Lu: %s: ",
-	       comm, pid,  cpu,
-	       secs, nsecs, event->name);
+	if (latency_format) {
+		printf("%8.8s-%-5d %3d",
+		       comm, pid, cpu);
+		print_lat_fmt(data, size);
+	} else
+		printf("%16s-%-5d [%03d]", comm, pid,  cpu);
+
+	printf(" %5lu.%06lu: %s: ", secs, usecs, event->name);
+
+	if (event->flags & EVENT_FL_FAILED) {
+		printf("EVENT '%s' FAILED TO PARSE\n",
+		       event->name);
+		return;
+	}
 
 	pretty_print(data, size, event);
 	printf("\n");
@@ -2807,46 +3078,71 @@
 	}
 }
 
-static void parse_header_field(char *type,
+static void parse_header_field(const char *field,
 			       int *offset, int *size)
 {
 	char *token;
+	int type;
 
-	if (read_expected(EVENT_ITEM, (char *)"field") < 0)
+	if (read_expected(EVENT_ITEM, "field") < 0)
 		return;
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return;
+
 	/* type */
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
-		return;
+		goto fail;
 	free_token(token);
 
-	if (read_expected(EVENT_ITEM, type) < 0)
+	if (read_expected(EVENT_ITEM, field) < 0)
 		return;
-	if (read_expected(EVENT_OP, (char *)";") < 0)
+	if (read_expected(EVENT_OP, ";") < 0)
 		return;
-	if (read_expected(EVENT_ITEM, (char *)"offset") < 0)
+	if (read_expected(EVENT_ITEM, "offset") < 0)
 		return;
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return;
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
-		return;
+		goto fail;
 	*offset = atoi(token);
 	free_token(token);
-	if (read_expected(EVENT_OP, (char *)";") < 0)
+	if (read_expected(EVENT_OP, ";") < 0)
 		return;
-	if (read_expected(EVENT_ITEM, (char *)"size") < 0)
+	if (read_expected(EVENT_ITEM, "size") < 0)
 		return;
-	if (read_expected(EVENT_OP, (char *)":") < 0)
+	if (read_expected(EVENT_OP, ":") < 0)
 		return;
 	if (read_expect_type(EVENT_ITEM, &token) < 0)
-		return;
+		goto fail;
 	*size = atoi(token);
 	free_token(token);
-	if (read_expected(EVENT_OP, (char *)";") < 0)
+	if (read_expected(EVENT_OP, ";") < 0)
 		return;
-	if (read_expect_type(EVENT_NEWLINE, &token) < 0)
-		return;
+	type = read_token(&token);
+	if (type != EVENT_NEWLINE) {
+		/* newer versions of the kernel have a "signed" type */
+		if (type != EVENT_ITEM)
+			goto fail;
+
+		if (strcmp(token, "signed") != 0)
+			goto fail;
+
+		free_token(token);
+
+		if (read_expected(EVENT_OP, ":") < 0)
+			return;
+
+		if (read_expect_type(EVENT_ITEM, &token))
+			goto fail;
+
+		free_token(token);
+		if (read_expected(EVENT_OP, ";") < 0)
+			return;
+
+		if (read_expect_type(EVENT_NEWLINE, &token))
+			goto fail;
+	}
+ fail:
 	free_token(token);
 }
 
@@ -2854,11 +3150,11 @@
 {
 	init_input_buf(buf, size);
 
-	parse_header_field((char *)"timestamp", &header_page_ts_offset,
+	parse_header_field("timestamp", &header_page_ts_offset,
 			   &header_page_ts_size);
-	parse_header_field((char *)"commit", &header_page_size_offset,
+	parse_header_field("commit", &header_page_size_offset,
 			   &header_page_size_size);
-	parse_header_field((char *)"data", &header_page_data_offset,
+	parse_header_field("data", &header_page_data_offset,
 			   &header_page_data_size);
 
 	return 0;
@@ -2909,6 +3205,9 @@
 	if (ret < 0)
 		die("failed to read ftrace event print fmt");
 
+	/* New ftrace handles args */
+	if (ret > 0)
+		return 0;
 	/*
 	 * The arguments for ftrace files are parsed by the fields.
 	 * Set up the fields as their arguments.
@@ -2926,7 +3225,7 @@
 	return 0;
 }
 
-int parse_event_file(char *buf, unsigned long size, char *system__unused __unused)
+int parse_event_file(char *buf, unsigned long size, char *sys)
 {
 	struct event *event;
 	int ret;
@@ -2946,12 +3245,18 @@
 		die("failed to read event id");
 
 	ret = event_read_format(event);
-	if (ret < 0)
-		die("failed to read event format");
+	if (ret < 0) {
+		warning("failed to read event format for %s", event->name);
+		goto event_failed;
+	}
 
 	ret = event_read_print(event);
-	if (ret < 0)
-		die("failed to read event print fmt");
+	if (ret < 0) {
+		warning("failed to read event print fmt for %s", event->name);
+		goto event_failed;
+	}
+
+	event->system = strdup(sys);
 
 #define PRINT_ARGS 0
 	if (PRINT_ARGS && event->print_fmt.args)
@@ -2959,6 +3264,12 @@
 
 	add_event(event);
 	return 0;
+
+ event_failed:
+	event->flags |= EVENT_FL_FAILED;
+	/* still add it even if it failed */
+	add_event(event);
+	return -1;
 }
 
 void parse_set_info(int nr_cpus, int long_sz)
diff --git a/tools/perf/util/trace-event-perl.c b/tools/perf/util/trace-event-perl.c
new file mode 100644
index 0000000..51e833f
--- /dev/null
+++ b/tools/perf/util/trace-event-perl.c
@@ -0,0 +1,598 @@
+/*
+ * trace-event-perl.  Feed perf trace events to an embedded Perl interpreter.
+ *
+ * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+
+#include "../perf.h"
+#include "util.h"
+#include "trace-event.h"
+#include "trace-event-perl.h"
+
+void xs_init(pTHX);
+
+void boot_Perf__Trace__Context(pTHX_ CV *cv);
+void boot_DynaLoader(pTHX_ CV *cv);
+
+void xs_init(pTHX)
+{
+	const char *file = __FILE__;
+	dXSUB_SYS;
+
+	newXS("Perf::Trace::Context::bootstrap", boot_Perf__Trace__Context,
+	      file);
+	newXS("DynaLoader::boot_DynaLoader", boot_DynaLoader, file);
+}
+
+INTERP my_perl;
+
+#define FTRACE_MAX_EVENT				\
+	((1 << (sizeof(unsigned short) * 8)) - 1)
+
+struct event *events[FTRACE_MAX_EVENT];
+
+static struct scripting_context *scripting_context;
+
+static char *cur_field_name;
+static int zero_flag_atom;
+
+static void define_symbolic_value(const char *ev_name,
+				  const char *field_name,
+				  const char *field_value,
+				  const char *field_str)
+{
+	unsigned long long value;
+	dSP;
+
+	value = eval_flag(field_value);
+
+	ENTER;
+	SAVETMPS;
+	PUSHMARK(SP);
+
+	XPUSHs(sv_2mortal(newSVpv(ev_name, 0)));
+	XPUSHs(sv_2mortal(newSVpv(field_name, 0)));
+	XPUSHs(sv_2mortal(newSVuv(value)));
+	XPUSHs(sv_2mortal(newSVpv(field_str, 0)));
+
+	PUTBACK;
+	if (get_cv("main::define_symbolic_value", 0))
+		call_pv("main::define_symbolic_value", G_SCALAR);
+	SPAGAIN;
+	PUTBACK;
+	FREETMPS;
+	LEAVE;
+}
+
+static void define_symbolic_values(struct print_flag_sym *field,
+				   const char *ev_name,
+				   const char *field_name)
+{
+	define_symbolic_value(ev_name, field_name, field->value, field->str);
+	if (field->next)
+		define_symbolic_values(field->next, ev_name, field_name);
+}
+
+static void define_symbolic_field(const char *ev_name,
+				  const char *field_name)
+{
+	dSP;
+
+	ENTER;
+	SAVETMPS;
+	PUSHMARK(SP);
+
+	XPUSHs(sv_2mortal(newSVpv(ev_name, 0)));
+	XPUSHs(sv_2mortal(newSVpv(field_name, 0)));
+
+	PUTBACK;
+	if (get_cv("main::define_symbolic_field", 0))
+		call_pv("main::define_symbolic_field", G_SCALAR);
+	SPAGAIN;
+	PUTBACK;
+	FREETMPS;
+	LEAVE;
+}
+
+static void define_flag_value(const char *ev_name,
+			      const char *field_name,
+			      const char *field_value,
+			      const char *field_str)
+{
+	unsigned long long value;
+	dSP;
+
+	value = eval_flag(field_value);
+
+	ENTER;
+	SAVETMPS;
+	PUSHMARK(SP);
+
+	XPUSHs(sv_2mortal(newSVpv(ev_name, 0)));
+	XPUSHs(sv_2mortal(newSVpv(field_name, 0)));
+	XPUSHs(sv_2mortal(newSVuv(value)));
+	XPUSHs(sv_2mortal(newSVpv(field_str, 0)));
+
+	PUTBACK;
+	if (get_cv("main::define_flag_value", 0))
+		call_pv("main::define_flag_value", G_SCALAR);
+	SPAGAIN;
+	PUTBACK;
+	FREETMPS;
+	LEAVE;
+}
+
+static void define_flag_values(struct print_flag_sym *field,
+			       const char *ev_name,
+			       const char *field_name)
+{
+	define_flag_value(ev_name, field_name, field->value, field->str);
+	if (field->next)
+		define_flag_values(field->next, ev_name, field_name);
+}
+
+static void define_flag_field(const char *ev_name,
+			      const char *field_name,
+			      const char *delim)
+{
+	dSP;
+
+	ENTER;
+	SAVETMPS;
+	PUSHMARK(SP);
+
+	XPUSHs(sv_2mortal(newSVpv(ev_name, 0)));
+	XPUSHs(sv_2mortal(newSVpv(field_name, 0)));
+	XPUSHs(sv_2mortal(newSVpv(delim, 0)));
+
+	PUTBACK;
+	if (get_cv("main::define_flag_field", 0))
+		call_pv("main::define_flag_field", G_SCALAR);
+	SPAGAIN;
+	PUTBACK;
+	FREETMPS;
+	LEAVE;
+}
+
+static void define_event_symbols(struct event *event,
+				 const char *ev_name,
+				 struct print_arg *args)
+{
+	switch (args->type) {
+	case PRINT_NULL:
+		break;
+	case PRINT_ATOM:
+		define_flag_value(ev_name, cur_field_name, "0",
+				  args->atom.atom);
+		zero_flag_atom = 0;
+		break;
+	case PRINT_FIELD:
+		if (cur_field_name)
+			free(cur_field_name);
+		cur_field_name = strdup(args->field.name);
+		break;
+	case PRINT_FLAGS:
+		define_event_symbols(event, ev_name, args->flags.field);
+		define_flag_field(ev_name, cur_field_name, args->flags.delim);
+		define_flag_values(args->flags.flags, ev_name, cur_field_name);
+		break;
+	case PRINT_SYMBOL:
+		define_event_symbols(event, ev_name, args->symbol.field);
+		define_symbolic_field(ev_name, cur_field_name);
+		define_symbolic_values(args->symbol.symbols, ev_name,
+				       cur_field_name);
+		break;
+	case PRINT_STRING:
+		break;
+	case PRINT_TYPE:
+		define_event_symbols(event, ev_name, args->typecast.item);
+		break;
+	case PRINT_OP:
+		if (strcmp(args->op.op, ":") == 0)
+			zero_flag_atom = 1;
+		define_event_symbols(event, ev_name, args->op.left);
+		define_event_symbols(event, ev_name, args->op.right);
+		break;
+	default:
+		/* we should warn... */
+		return;
+	}
+
+	if (args->next)
+		define_event_symbols(event, ev_name, args->next);
+}
+
+static inline struct event *find_cache_event(int type)
+{
+	static char ev_name[256];
+	struct event *event;
+
+	if (events[type])
+		return events[type];
+
+	events[type] = event = trace_find_event(type);
+	if (!event)
+		return NULL;
+
+	sprintf(ev_name, "%s::%s", event->system, event->name);
+
+	define_event_symbols(event, ev_name, event->print_fmt.args);
+
+	return event;
+}
+
+int common_pc(struct scripting_context *context)
+{
+	int pc;
+
+	pc = parse_common_pc(context->event_data);
+
+	return pc;
+}
+
+int common_flags(struct scripting_context *context)
+{
+	int flags;
+
+	flags = parse_common_flags(context->event_data);
+
+	return flags;
+}
+
+int common_lock_depth(struct scripting_context *context)
+{
+	int lock_depth;
+
+	lock_depth = parse_common_lock_depth(context->event_data);
+
+	return lock_depth;
+}
+
+static void perl_process_event(int cpu, void *data,
+			       int size __attribute((unused)),
+			       unsigned long long nsecs, char *comm)
+{
+	struct format_field *field;
+	static char handler[256];
+	unsigned long long val;
+	unsigned long s, ns;
+	struct event *event;
+	int type;
+	int pid;
+
+	dSP;
+
+	type = trace_parse_common_type(data);
+
+	event = find_cache_event(type);
+	if (!event)
+		die("ug! no event found for type %d", type);
+
+	pid = trace_parse_common_pid(data);
+
+	sprintf(handler, "%s::%s", event->system, event->name);
+
+	s = nsecs / NSECS_PER_SEC;
+	ns = nsecs - s * NSECS_PER_SEC;
+
+	scripting_context->event_data = data;
+
+	ENTER;
+	SAVETMPS;
+	PUSHMARK(SP);
+
+	XPUSHs(sv_2mortal(newSVpv(handler, 0)));
+	XPUSHs(sv_2mortal(newSViv(PTR2IV(scripting_context))));
+	XPUSHs(sv_2mortal(newSVuv(cpu)));
+	XPUSHs(sv_2mortal(newSVuv(s)));
+	XPUSHs(sv_2mortal(newSVuv(ns)));
+	XPUSHs(sv_2mortal(newSViv(pid)));
+	XPUSHs(sv_2mortal(newSVpv(comm, 0)));
+
+	/* common fields other than pid can be accessed via xsub fns */
+
+	for (field = event->format.fields; field; field = field->next) {
+		if (field->flags & FIELD_IS_STRING) {
+			int offset;
+			if (field->flags & FIELD_IS_DYNAMIC) {
+				offset = *(int *)(data + field->offset);
+				offset &= 0xffff;
+			} else
+				offset = field->offset;
+			XPUSHs(sv_2mortal(newSVpv((char *)data + offset, 0)));
+		} else { /* FIELD_IS_NUMERIC */
+			val = read_size(data + field->offset, field->size);
+			if (field->flags & FIELD_IS_SIGNED) {
+				XPUSHs(sv_2mortal(newSViv(val)));
+			} else {
+				XPUSHs(sv_2mortal(newSVuv(val)));
+			}
+		}
+	}
+
+	PUTBACK;
+
+	if (get_cv(handler, 0))
+		call_pv(handler, G_SCALAR);
+	else if (get_cv("main::trace_unhandled", 0)) {
+		XPUSHs(sv_2mortal(newSVpv(handler, 0)));
+		XPUSHs(sv_2mortal(newSViv(PTR2IV(scripting_context))));
+		XPUSHs(sv_2mortal(newSVuv(cpu)));
+		XPUSHs(sv_2mortal(newSVuv(nsecs)));
+		XPUSHs(sv_2mortal(newSViv(pid)));
+		XPUSHs(sv_2mortal(newSVpv(comm, 0)));
+		call_pv("main::trace_unhandled", G_SCALAR);
+	}
+	SPAGAIN;
+	PUTBACK;
+	FREETMPS;
+	LEAVE;
+}
+
+static void run_start_sub(void)
+{
+	dSP; /* access to Perl stack */
+	PUSHMARK(SP);
+
+	if (get_cv("main::trace_begin", 0))
+		call_pv("main::trace_begin", G_DISCARD | G_NOARGS);
+}
+
+/*
+ * Start trace script
+ */
+static int perl_start_script(const char *script)
+{
+	const char *command_line[2] = { "", NULL };
+
+	command_line[1] = script;
+
+	my_perl = perl_alloc();
+	perl_construct(my_perl);
+
+	if (perl_parse(my_perl, xs_init, 2, (char **)command_line,
+		       (char **)NULL))
+		return -1;
+
+	perl_run(my_perl);
+	if (SvTRUE(ERRSV))
+		return -1;
+
+	run_start_sub();
+
+	fprintf(stderr, "perf trace started with Perl script %s\n\n", script);
+
+	return 0;
+}
+
+/*
+ * Stop trace script
+ */
+static int perl_stop_script(void)
+{
+	dSP; /* access to Perl stack */
+	PUSHMARK(SP);
+
+	if (get_cv("main::trace_end", 0))
+		call_pv("main::trace_end", G_DISCARD | G_NOARGS);
+
+	perl_destruct(my_perl);
+	perl_free(my_perl);
+
+	fprintf(stderr, "\nperf trace Perl script stopped\n");
+
+	return 0;
+}
+
+static int perl_generate_script(const char *outfile)
+{
+	struct event *event = NULL;
+	struct format_field *f;
+	char fname[PATH_MAX];
+	int not_first, count;
+	FILE *ofp;
+
+	sprintf(fname, "%s.pl", outfile);
+	ofp = fopen(fname, "w");
+	if (ofp == NULL) {
+		fprintf(stderr, "couldn't open %s\n", fname);
+		return -1;
+	}
+
+	fprintf(ofp, "# perf trace event handlers, "
+		"generated by perf trace -g perl\n");
+
+	fprintf(ofp, "# Licensed under the terms of the GNU GPL"
+		" License version 2\n\n");
+
+	fprintf(ofp, "# The common_* event handler fields are the most useful "
+		"fields common to\n");
+
+	fprintf(ofp, "# all events.  They don't necessarily correspond to "
+		"the 'common_*' fields\n");
+
+	fprintf(ofp, "# in the format files.  Those fields not available as "
+		"handler params can\n");
+
+	fprintf(ofp, "# be retrieved using Perl functions of the form "
+		"common_*($context).\n");
+
+	fprintf(ofp, "# See Context.pm for the list of available "
+		"functions.\n\n");
+
+	fprintf(ofp, "use lib \"$ENV{'PERF_EXEC_PATH'}/scripts/perl/"
+		"Perf-Trace-Util/lib\";\n");
+
+	fprintf(ofp, "use lib \"./Perf-Trace-Util/lib\";\n");
+	fprintf(ofp, "use Perf::Trace::Core;\n");
+	fprintf(ofp, "use Perf::Trace::Context;\n");
+	fprintf(ofp, "use Perf::Trace::Util;\n\n");
+
+	fprintf(ofp, "sub trace_begin\n{\n\t# optional\n}\n\n");
+	fprintf(ofp, "sub trace_end\n{\n\t# optional\n}\n\n");
+
+	while ((event = trace_find_next_event(event))) {
+		fprintf(ofp, "sub %s::%s\n{\n", event->system, event->name);
+		fprintf(ofp, "\tmy (");
+
+		fprintf(ofp, "$event_name, ");
+		fprintf(ofp, "$context, ");
+		fprintf(ofp, "$common_cpu, ");
+		fprintf(ofp, "$common_secs, ");
+		fprintf(ofp, "$common_nsecs,\n");
+		fprintf(ofp, "\t    $common_pid, ");
+		fprintf(ofp, "$common_comm,\n\t    ");
+
+		not_first = 0;
+		count = 0;
+
+		for (f = event->format.fields; f; f = f->next) {
+			if (not_first++)
+				fprintf(ofp, ", ");
+			if (++count % 5 == 0)
+				fprintf(ofp, "\n\t    ");
+
+			fprintf(ofp, "$%s", f->name);
+		}
+		fprintf(ofp, ") = @_;\n\n");
+
+		fprintf(ofp, "\tprint_header($event_name, $common_cpu, "
+			"$common_secs, $common_nsecs,\n\t             "
+			"$common_pid, $common_comm);\n\n");
+
+		fprintf(ofp, "\tprintf(\"");
+
+		not_first = 0;
+		count = 0;
+
+		for (f = event->format.fields; f; f = f->next) {
+			if (not_first++)
+				fprintf(ofp, ", ");
+			if (count && count % 4 == 0) {
+				fprintf(ofp, "\".\n\t       \"");
+			}
+			count++;
+
+			fprintf(ofp, "%s=", f->name);
+			if (f->flags & FIELD_IS_STRING ||
+			    f->flags & FIELD_IS_FLAG ||
+			    f->flags & FIELD_IS_SYMBOLIC)
+				fprintf(ofp, "%%s");
+			else if (f->flags & FIELD_IS_SIGNED)
+				fprintf(ofp, "%%d");
+			else
+				fprintf(ofp, "%%u");
+		}
+
+		fprintf(ofp, "\\n\",\n\t       ");
+
+		not_first = 0;
+		count = 0;
+
+		for (f = event->format.fields; f; f = f->next) {
+			if (not_first++)
+				fprintf(ofp, ", ");
+
+			if (++count % 5 == 0)
+				fprintf(ofp, "\n\t       ");
+
+			if (f->flags & FIELD_IS_FLAG) {
+				if ((count - 1) % 5 != 0) {
+					fprintf(ofp, "\n\t       ");
+					count = 4;
+				}
+				fprintf(ofp, "flag_str(\"");
+				fprintf(ofp, "%s::%s\", ", event->system,
+					event->name);
+				fprintf(ofp, "\"%s\", $%s)", f->name,
+					f->name);
+			} else if (f->flags & FIELD_IS_SYMBOLIC) {
+				if ((count - 1) % 5 != 0) {
+					fprintf(ofp, "\n\t       ");
+					count = 4;
+				}
+				fprintf(ofp, "symbol_str(\"");
+				fprintf(ofp, "%s::%s\", ", event->system,
+					event->name);
+				fprintf(ofp, "\"%s\", $%s)", f->name,
+					f->name);
+			} else
+				fprintf(ofp, "$%s", f->name);
+		}
+
+		fprintf(ofp, ");\n");
+		fprintf(ofp, "}\n\n");
+	}
+
+	fprintf(ofp, "sub trace_unhandled\n{\n\tmy ($event_name, $context, "
+		"$common_cpu, $common_secs, $common_nsecs,\n\t    "
+		"$common_pid, $common_comm) = @_;\n\n");
+
+	fprintf(ofp, "\tprint_header($event_name, $common_cpu, "
+		"$common_secs, $common_nsecs,\n\t             $common_pid, "
+		"$common_comm);\n}\n\n");
+
+	fprintf(ofp, "sub print_header\n{\n"
+		"\tmy ($event_name, $cpu, $secs, $nsecs, $pid, $comm) = @_;\n\n"
+		"\tprintf(\"%%-20s %%5u %%05u.%%09u %%8u %%-20s \",\n\t       "
+		"$event_name, $cpu, $secs, $nsecs, $pid, $comm);\n}");
+
+	fclose(ofp);
+
+	fprintf(stderr, "generated Perl script: %s\n", fname);
+
+	return 0;
+}
+
+struct scripting_ops perl_scripting_ops = {
+	.name = "Perl",
+	.start_script = perl_start_script,
+	.stop_script = perl_stop_script,
+	.process_event = perl_process_event,
+	.generate_script = perl_generate_script,
+};
+
+#ifdef NO_LIBPERL
+void setup_perl_scripting(void)
+{
+	fprintf(stderr, "Perl scripting not supported."
+		"  Install libperl and rebuild perf to enable it.  e.g. "
+		"apt-get install libperl-dev (ubuntu), yum install "
+		"perl-ExtUtils-Embed (Fedora), etc.\n");
+}
+#else
+void setup_perl_scripting(void)
+{
+	int err;
+	err = script_spec_register("Perl", &perl_scripting_ops);
+	if (err)
+		die("error registering Perl script extension");
+
+	err = script_spec_register("pl", &perl_scripting_ops);
+	if (err)
+		die("error registering pl script extension");
+
+	scripting_context = malloc(sizeof(struct scripting_context));
+}
+#endif
diff --git a/tools/perf/util/trace-event-perl.h b/tools/perf/util/trace-event-perl.h
new file mode 100644
index 0000000..8fe0d86
--- /dev/null
+++ b/tools/perf/util/trace-event-perl.h
@@ -0,0 +1,51 @@
+#ifndef __PERF_TRACE_EVENT_PERL_H
+#define __PERF_TRACE_EVENT_PERL_H
+#ifdef NO_LIBPERL
+typedef int INTERP;
+#define dSP
+#define ENTER
+#define SAVETMPS
+#define PUTBACK
+#define SPAGAIN
+#define FREETMPS
+#define LEAVE
+#define SP
+#define ERRSV
+#define G_SCALAR		(0)
+#define G_DISCARD		(0)
+#define G_NOARGS		(0)
+#define PUSHMARK(a)
+#define SvTRUE(a)		(0)
+#define XPUSHs(s)
+#define sv_2mortal(a)
+#define newSVpv(a,b)
+#define newSVuv(a)
+#define newSViv(a)
+#define get_cv(a,b)		(0)
+#define call_pv(a,b)		(0)
+#define perl_alloc()		(0)
+#define perl_construct(a)	(0)
+#define perl_parse(a,b,c,d,e)	(0)
+#define perl_run(a)		(0)
+#define perl_destruct(a)	(0)
+#define perl_free(a)		(0)
+#define pTHX			void
+#define CV			void
+#define dXSUB_SYS
+#define pTHX_
+static inline void newXS(const char *a, void *b, const char *c) {}
+#else
+#include <EXTERN.h>
+#include <perl.h>
+typedef PerlInterpreter * INTERP;
+#endif
+
+struct scripting_context {
+	void *event_data;
+};
+
+int common_pc(struct scripting_context *context);
+int common_flags(struct scripting_context *context);
+int common_lock_depth(struct scripting_context *context);
+
+#endif /* __PERF_TRACE_EVENT_PERL_H */
diff --git a/tools/perf/util/trace-event-read.c b/tools/perf/util/trace-event-read.c
index 1b5c847..342dfdd 100644
--- a/tools/perf/util/trace-event-read.c
+++ b/tools/perf/util/trace-event-read.c
@@ -458,9 +458,8 @@
 	return data;
 }
 
-void trace_report(void)
+void trace_report(int fd)
 {
-	const char *input_file = "trace.info";
 	char buf[BUFSIZ];
 	char test[] = { 23, 8, 68 };
 	char *version;
@@ -468,17 +467,15 @@
 	int show_funcs = 0;
 	int show_printk = 0;
 
-	input_fd = open(input_file, O_RDONLY);
-	if (input_fd < 0)
-		die("opening '%s'\n", input_file);
+	input_fd = fd;
 
 	read_or_die(buf, 3);
 	if (memcmp(buf, test, 3) != 0)
-		die("not an trace data file");
+		die("no trace data in the file");
 
 	read_or_die(buf, 7);
 	if (memcmp(buf, "tracing", 7) != 0)
-		die("not a trace file (missing tracing)");
+		die("not a trace file (missing 'tracing' tag)");
 
 	version = read_string();
 	if (show_version)
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index 693f815..81698d5 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -1,5 +1,5 @@
-#ifndef _TRACE_EVENTS_H
-#define _TRACE_EVENTS_H
+#ifndef __PERF_TRACE_EVENTS_H
+#define __PERF_TRACE_EVENTS_H
 
 #include "parse-events.h"
 
@@ -26,6 +26,11 @@
 enum format_flags {
 	FIELD_IS_ARRAY		= 1,
 	FIELD_IS_POINTER	= 2,
+	FIELD_IS_SIGNED		= 4,
+	FIELD_IS_STRING		= 8,
+	FIELD_IS_DYNAMIC	= 16,
+	FIELD_IS_FLAG		= 32,
+	FIELD_IS_SYMBOLIC	= 64,
 };
 
 struct format_field {
@@ -132,15 +137,18 @@
 	int			flags;
 	struct format		format;
 	struct print_fmt	print_fmt;
+	char			*system;
 };
 
 enum {
-	EVENT_FL_ISFTRACE	= 1,
-	EVENT_FL_ISPRINT	= 2,
-	EVENT_FL_ISBPRINT	= 4,
-	EVENT_FL_ISFUNC		= 8,
-	EVENT_FL_ISFUNCENT	= 16,
-	EVENT_FL_ISFUNCRET	= 32,
+	EVENT_FL_ISFTRACE	= 0x01,
+	EVENT_FL_ISPRINT	= 0x02,
+	EVENT_FL_ISBPRINT	= 0x04,
+	EVENT_FL_ISFUNC		= 0x08,
+	EVENT_FL_ISFUNCENT	= 0x10,
+	EVENT_FL_ISFUNCRET	= 0x20,
+
+	EVENT_FL_FAILED		= 0x80000000
 };
 
 struct record {
@@ -154,7 +162,7 @@
 
 void parse_set_info(int nr_cpus, int long_sz);
 
-void trace_report(void);
+void trace_report(int fd);
 
 void *malloc_or_die(unsigned int size);
 
@@ -166,7 +174,7 @@
 void print_printk(void);
 
 int parse_ftrace_file(char *buf, unsigned long size);
-int parse_event_file(char *buf, unsigned long size, char *system);
+int parse_event_file(char *buf, unsigned long size, char *sys);
 void print_event(int cpu, void *data, int size, unsigned long long nsecs,
 		  char *comm);
 
@@ -233,13 +241,45 @@
 extern int header_page_data_offset;
 extern int header_page_data_size;
 
+extern int latency_format;
+
 int parse_header_page(char *buf, unsigned long size);
 int trace_parse_common_type(void *data);
+int trace_parse_common_pid(void *data);
+int parse_common_pc(void *data);
+int parse_common_flags(void *data);
+int parse_common_lock_depth(void *data);
 struct event *trace_find_event(int id);
+struct event *trace_find_next_event(struct event *event);
+unsigned long long read_size(void *ptr, int size);
 unsigned long long
 raw_field_value(struct event *event, const char *name, void *data);
 void *raw_field_ptr(struct event *event, const char *name, void *data);
+unsigned long long eval_flag(const char *flag);
 
-void read_tracing_data(struct perf_event_attr *pattrs, int nb_events);
+int read_tracing_data(int fd, struct perf_event_attr *pattrs, int nb_events);
 
-#endif /* _TRACE_EVENTS_H */
+/* taken from kernel/trace/trace.h */
+enum trace_flag_type {
+	TRACE_FLAG_IRQS_OFF		= 0x01,
+	TRACE_FLAG_IRQS_NOSUPPORT	= 0x02,
+	TRACE_FLAG_NEED_RESCHED		= 0x04,
+	TRACE_FLAG_HARDIRQ		= 0x08,
+	TRACE_FLAG_SOFTIRQ		= 0x10,
+};
+
+struct scripting_ops {
+	const char *name;
+	int (*start_script) (const char *);
+	int (*stop_script) (void);
+	void (*process_event) (int cpu, void *data, int size,
+			       unsigned long long nsecs, char *comm);
+	int (*generate_script) (const char *outfile);
+};
+
+int script_spec_register(const char *spec, struct scripting_ops *ops);
+
+extern struct scripting_ops perl_scripting_ops;
+void setup_perl_scripting(void);
+
+#endif /* __PERF_TRACE_EVENTS_H */
diff --git a/tools/perf/util/types.h b/tools/perf/util/types.h
index 5e75f90..7d6b833 100644
--- a/tools/perf/util/types.h
+++ b/tools/perf/util/types.h
@@ -1,5 +1,5 @@
-#ifndef _PERF_TYPES_H
-#define _PERF_TYPES_H
+#ifndef __PERF_TYPES_H
+#define __PERF_TYPES_H
 
 /*
  * We define u64 as unsigned long long for every architecture
@@ -14,4 +14,4 @@
 typedef unsigned char	   u8;
 typedef signed char	   s8;
 
-#endif /* _PERF_TYPES_H */
+#endif /* __PERF_TYPES_H */
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 9de2329..c673d88 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -84,6 +84,9 @@
 #include <iconv.h>
 #endif
 
+extern const char *graph_line;
+extern const char *graph_dotted_line;
+
 /* On most systems <limits.h> would have given us this, but
  * not on some systems (e.g. GNU/Hurd).
  */
@@ -134,6 +137,15 @@
 extern int error(const char *err, ...) __attribute__((format (printf, 1, 2)));
 extern void warning(const char *err, ...) __attribute__((format (printf, 1, 2)));
 
+#include "../../../include/linux/stringify.h"
+
+#define DIE_IF(cnd)	\
+	do { if (cnd)	\
+		die(" at (" __FILE__ ":" __stringify(__LINE__) "): "	\
+		    __stringify(cnd) "\n");				\
+	} while (0)
+
+
 extern void set_die_routine(void (*routine)(const char *err, va_list params) NORETURN);
 
 extern int prefixcmp(const char *str, const char *prefix);
@@ -278,17 +290,15 @@
  * Wrappers:
  */
 extern char *xstrdup(const char *str);
-extern void *xmalloc(size_t size);
+extern void *xmalloc(size_t size) __attribute__((weak));
 extern void *xmemdupz(const void *data, size_t len);
 extern char *xstrndup(const char *str, size_t len);
-extern void *xrealloc(void *ptr, size_t size);
-extern void *xcalloc(size_t nmemb, size_t size);
-extern void *xmmap(void *start, size_t length, int prot, int flags, int fd, off_t offset);
-extern ssize_t xread(int fd, void *buf, size_t len);
-extern ssize_t xwrite(int fd, const void *buf, size_t len);
-extern int xdup(int fd);
-extern FILE *xfdopen(int fd, const char *mode);
-extern int xmkstemp(char *template);
+extern void *xrealloc(void *ptr, size_t size) __attribute__((weak));
+
+static inline void *zalloc(size_t size)
+{
+	return calloc(1, size);
+}
 
 static inline size_t xsize_t(off_t len)
 {
@@ -306,6 +316,7 @@
 #undef isascii
 #undef isspace
 #undef isdigit
+#undef isxdigit
 #undef isalpha
 #undef isprint
 #undef isalnum
@@ -323,6 +334,8 @@
 #define isascii(x) (((x) & ~0x7f) == 0)
 #define isspace(x) sane_istest(x,GIT_SPACE)
 #define isdigit(x) sane_istest(x,GIT_DIGIT)
+#define isxdigit(x)	\
+	(sane_istest(toupper(x), GIT_ALPHA | GIT_DIGIT) && toupper(x) < 'G')
 #define isalpha(x) sane_istest(x,GIT_ALPHA)
 #define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT)
 #define isprint(x) sane_istest(x,GIT_PRINT)
diff --git a/tools/perf/util/values.h b/tools/perf/util/values.h
index cadf8cf..2fa967e 100644
--- a/tools/perf/util/values.h
+++ b/tools/perf/util/values.h
@@ -1,5 +1,5 @@
-#ifndef _PERF_VALUES_H
-#define _PERF_VALUES_H
+#ifndef __PERF_VALUES_H
+#define __PERF_VALUES_H
 
 #include "types.h"
 
@@ -24,4 +24,4 @@
 void perf_read_values_display(FILE *fp, struct perf_read_values *values,
 			      int raw);
 
-#endif /* _PERF_VALUES_H */
+#endif /* __PERF_VALUES_H */
diff --git a/tools/perf/util/wrapper.c b/tools/perf/util/wrapper.c
index 4574ac2..bf44ca8 100644
--- a/tools/perf/util/wrapper.c
+++ b/tools/perf/util/wrapper.c
@@ -79,43 +79,12 @@
 	return ret;
 }
 
-void *xcalloc(size_t nmemb, size_t size)
-{
-	void *ret = calloc(nmemb, size);
-	if (!ret && (!nmemb || !size))
-		ret = calloc(1, 1);
-	if (!ret) {
-		release_pack_memory(nmemb * size, -1);
-		ret = calloc(nmemb, size);
-		if (!ret && (!nmemb || !size))
-			ret = calloc(1, 1);
-		if (!ret)
-			die("Out of memory, calloc failed");
-	}
-	return ret;
-}
-
-void *xmmap(void *start, size_t length,
-	int prot, int flags, int fd, off_t offset)
-{
-	void *ret = mmap(start, length, prot, flags, fd, offset);
-	if (ret == MAP_FAILED) {
-		if (!length)
-			return NULL;
-		release_pack_memory(length, fd);
-		ret = mmap(start, length, prot, flags, fd, offset);
-		if (ret == MAP_FAILED)
-			die("Out of memory? mmap failed: %s", strerror(errno));
-	}
-	return ret;
-}
-
 /*
  * xread() is the same a read(), but it automatically restarts read()
  * operations with a recoverable error (EAGAIN and EINTR). xread()
  * DOES NOT GUARANTEE that "len" bytes is read even if the data is available.
  */
-ssize_t xread(int fd, void *buf, size_t len)
+static ssize_t xread(int fd, void *buf, size_t len)
 {
 	ssize_t nr;
 	while (1) {
@@ -131,7 +100,7 @@
  * operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT
  * GUARANTEE that "len" bytes is written even if the operation is successful.
  */
-ssize_t xwrite(int fd, const void *buf, size_t len)
+static ssize_t xwrite(int fd, const void *buf, size_t len)
 {
 	ssize_t nr;
 	while (1) {
@@ -179,29 +148,3 @@
 
 	return total;
 }
-
-int xdup(int fd)
-{
-	int ret = dup(fd);
-	if (ret < 0)
-		die("dup failed: %s", strerror(errno));
-	return ret;
-}
-
-FILE *xfdopen(int fd, const char *mode)
-{
-	FILE *stream = fdopen(fd, mode);
-	if (stream == NULL)
-		die("Out of memory? fdopen failed: %s", strerror(errno));
-	return stream;
-}
-
-int xmkstemp(char *template)
-{
-	int fd;
-
-	fd = mkstemp(template);
-	if (fd < 0)
-		die("Unable to create temporary file: %s", strerror(errno));
-	return fd;
-}
diff --git a/virt/kvm/assigned-dev.c b/virt/kvm/assigned-dev.c
new file mode 100644
index 0000000..fd9c097
--- /dev/null
+++ b/virt/kvm/assigned-dev.c
@@ -0,0 +1,818 @@
+/*
+ * Kernel-based Virtual Machine - device assignment support
+ *
+ * Copyright (C) 2006-9 Red Hat, Inc
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/kvm.h>
+#include <linux/uaccess.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include "irq.h"
+
+static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
+						      int assigned_dev_id)
+{
+	struct list_head *ptr;
+	struct kvm_assigned_dev_kernel *match;
+
+	list_for_each(ptr, head) {
+		match = list_entry(ptr, struct kvm_assigned_dev_kernel, list);
+		if (match->assigned_dev_id == assigned_dev_id)
+			return match;
+	}
+	return NULL;
+}
+
+static int find_index_from_host_irq(struct kvm_assigned_dev_kernel
+				    *assigned_dev, int irq)
+{
+	int i, index;
+	struct msix_entry *host_msix_entries;
+
+	host_msix_entries = assigned_dev->host_msix_entries;
+
+	index = -1;
+	for (i = 0; i < assigned_dev->entries_nr; i++)
+		if (irq == host_msix_entries[i].vector) {
+			index = i;
+			break;
+		}
+	if (index < 0) {
+		printk(KERN_WARNING "Fail to find correlated MSI-X entry!\n");
+		return 0;
+	}
+
+	return index;
+}
+
+static void kvm_assigned_dev_interrupt_work_handler(struct work_struct *work)
+{
+	struct kvm_assigned_dev_kernel *assigned_dev;
+	struct kvm *kvm;
+	int i;
+
+	assigned_dev = container_of(work, struct kvm_assigned_dev_kernel,
+				    interrupt_work);
+	kvm = assigned_dev->kvm;
+
+	spin_lock_irq(&assigned_dev->assigned_dev_lock);
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
+		struct kvm_guest_msix_entry *guest_entries =
+			assigned_dev->guest_msix_entries;
+		for (i = 0; i < assigned_dev->entries_nr; i++) {
+			if (!(guest_entries[i].flags &
+					KVM_ASSIGNED_MSIX_PENDING))
+				continue;
+			guest_entries[i].flags &= ~KVM_ASSIGNED_MSIX_PENDING;
+			kvm_set_irq(assigned_dev->kvm,
+				    assigned_dev->irq_source_id,
+				    guest_entries[i].vector, 1);
+		}
+	} else
+		kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
+			    assigned_dev->guest_irq, 1);
+
+	spin_unlock_irq(&assigned_dev->assigned_dev_lock);
+}
+
+static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
+{
+	unsigned long flags;
+	struct kvm_assigned_dev_kernel *assigned_dev =
+		(struct kvm_assigned_dev_kernel *) dev_id;
+
+	spin_lock_irqsave(&assigned_dev->assigned_dev_lock, flags);
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
+		int index = find_index_from_host_irq(assigned_dev, irq);
+		if (index < 0)
+			goto out;
+		assigned_dev->guest_msix_entries[index].flags |=
+			KVM_ASSIGNED_MSIX_PENDING;
+	}
+
+	schedule_work(&assigned_dev->interrupt_work);
+
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_GUEST_INTX) {
+		disable_irq_nosync(irq);
+		assigned_dev->host_irq_disabled = true;
+	}
+
+out:
+	spin_unlock_irqrestore(&assigned_dev->assigned_dev_lock, flags);
+	return IRQ_HANDLED;
+}
+
+/* Ack the irq line for an assigned device */
+static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian)
+{
+	struct kvm_assigned_dev_kernel *dev;
+	unsigned long flags;
+
+	if (kian->gsi == -1)
+		return;
+
+	dev = container_of(kian, struct kvm_assigned_dev_kernel,
+			   ack_notifier);
+
+	kvm_set_irq(dev->kvm, dev->irq_source_id, dev->guest_irq, 0);
+
+	/* The guest irq may be shared so this ack may be
+	 * from another device.
+	 */
+	spin_lock_irqsave(&dev->assigned_dev_lock, flags);
+	if (dev->host_irq_disabled) {
+		enable_irq(dev->host_irq);
+		dev->host_irq_disabled = false;
+	}
+	spin_unlock_irqrestore(&dev->assigned_dev_lock, flags);
+}
+
+static void deassign_guest_irq(struct kvm *kvm,
+			       struct kvm_assigned_dev_kernel *assigned_dev)
+{
+	kvm_unregister_irq_ack_notifier(kvm, &assigned_dev->ack_notifier);
+	assigned_dev->ack_notifier.gsi = -1;
+
+	if (assigned_dev->irq_source_id != -1)
+		kvm_free_irq_source_id(kvm, assigned_dev->irq_source_id);
+	assigned_dev->irq_source_id = -1;
+	assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_GUEST_MASK);
+}
+
+/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
+static void deassign_host_irq(struct kvm *kvm,
+			      struct kvm_assigned_dev_kernel *assigned_dev)
+{
+	/*
+	 * In kvm_free_device_irq, cancel_work_sync return true if:
+	 * 1. work is scheduled, and then cancelled.
+	 * 2. work callback is executed.
+	 *
+	 * The first one ensured that the irq is disabled and no more events
+	 * would happen. But for the second one, the irq may be enabled (e.g.
+	 * for MSI). So we disable irq here to prevent further events.
+	 *
+	 * Notice this maybe result in nested disable if the interrupt type is
+	 * INTx, but it's OK for we are going to free it.
+	 *
+	 * If this function is a part of VM destroy, please ensure that till
+	 * now, the kvm state is still legal for probably we also have to wait
+	 * interrupt_work done.
+	 */
+	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
+		int i;
+		for (i = 0; i < assigned_dev->entries_nr; i++)
+			disable_irq_nosync(assigned_dev->
+					   host_msix_entries[i].vector);
+
+		cancel_work_sync(&assigned_dev->interrupt_work);
+
+		for (i = 0; i < assigned_dev->entries_nr; i++)
+			free_irq(assigned_dev->host_msix_entries[i].vector,
+				 (void *)assigned_dev);
+
+		assigned_dev->entries_nr = 0;
+		kfree(assigned_dev->host_msix_entries);
+		kfree(assigned_dev->guest_msix_entries);
+		pci_disable_msix(assigned_dev->dev);
+	} else {
+		/* Deal with MSI and INTx */
+		disable_irq_nosync(assigned_dev->host_irq);
+		cancel_work_sync(&assigned_dev->interrupt_work);
+
+		free_irq(assigned_dev->host_irq, (void *)assigned_dev);
+
+		if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSI)
+			pci_disable_msi(assigned_dev->dev);
+	}
+
+	assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_HOST_MASK);
+}
+
+static int kvm_deassign_irq(struct kvm *kvm,
+			    struct kvm_assigned_dev_kernel *assigned_dev,
+			    unsigned long irq_requested_type)
+{
+	unsigned long guest_irq_type, host_irq_type;
+
+	if (!irqchip_in_kernel(kvm))
+		return -EINVAL;
+	/* no irq assignment to deassign */
+	if (!assigned_dev->irq_requested_type)
+		return -ENXIO;
+
+	host_irq_type = irq_requested_type & KVM_DEV_IRQ_HOST_MASK;
+	guest_irq_type = irq_requested_type & KVM_DEV_IRQ_GUEST_MASK;
+
+	if (host_irq_type)
+		deassign_host_irq(kvm, assigned_dev);
+	if (guest_irq_type)
+		deassign_guest_irq(kvm, assigned_dev);
+
+	return 0;
+}
+
+static void kvm_free_assigned_irq(struct kvm *kvm,
+				  struct kvm_assigned_dev_kernel *assigned_dev)
+{
+	kvm_deassign_irq(kvm, assigned_dev, assigned_dev->irq_requested_type);
+}
+
+static void kvm_free_assigned_device(struct kvm *kvm,
+				     struct kvm_assigned_dev_kernel
+				     *assigned_dev)
+{
+	kvm_free_assigned_irq(kvm, assigned_dev);
+
+	pci_reset_function(assigned_dev->dev);
+
+	pci_release_regions(assigned_dev->dev);
+	pci_disable_device(assigned_dev->dev);
+	pci_dev_put(assigned_dev->dev);
+
+	list_del(&assigned_dev->list);
+	kfree(assigned_dev);
+}
+
+void kvm_free_all_assigned_devices(struct kvm *kvm)
+{
+	struct list_head *ptr, *ptr2;
+	struct kvm_assigned_dev_kernel *assigned_dev;
+
+	list_for_each_safe(ptr, ptr2, &kvm->arch.assigned_dev_head) {
+		assigned_dev = list_entry(ptr,
+					  struct kvm_assigned_dev_kernel,
+					  list);
+
+		kvm_free_assigned_device(kvm, assigned_dev);
+	}
+}
+
+static int assigned_device_enable_host_intx(struct kvm *kvm,
+					    struct kvm_assigned_dev_kernel *dev)
+{
+	dev->host_irq = dev->dev->irq;
+	/* Even though this is PCI, we don't want to use shared
+	 * interrupts. Sharing host devices with guest-assigned devices
+	 * on the same interrupt line is not a happy situation: there
+	 * are going to be long delays in accepting, acking, etc.
+	 */
+	if (request_irq(dev->host_irq, kvm_assigned_dev_intr,
+			0, "kvm_assigned_intx_device", (void *)dev))
+		return -EIO;
+	return 0;
+}
+
+#ifdef __KVM_HAVE_MSI
+static int assigned_device_enable_host_msi(struct kvm *kvm,
+					   struct kvm_assigned_dev_kernel *dev)
+{
+	int r;
+
+	if (!dev->dev->msi_enabled) {
+		r = pci_enable_msi(dev->dev);
+		if (r)
+			return r;
+	}
+
+	dev->host_irq = dev->dev->irq;
+	if (request_irq(dev->host_irq, kvm_assigned_dev_intr, 0,
+			"kvm_assigned_msi_device", (void *)dev)) {
+		pci_disable_msi(dev->dev);
+		return -EIO;
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef __KVM_HAVE_MSIX
+static int assigned_device_enable_host_msix(struct kvm *kvm,
+					    struct kvm_assigned_dev_kernel *dev)
+{
+	int i, r = -EINVAL;
+
+	/* host_msix_entries and guest_msix_entries should have been
+	 * initialized */
+	if (dev->entries_nr == 0)
+		return r;
+
+	r = pci_enable_msix(dev->dev, dev->host_msix_entries, dev->entries_nr);
+	if (r)
+		return r;
+
+	for (i = 0; i < dev->entries_nr; i++) {
+		r = request_irq(dev->host_msix_entries[i].vector,
+				kvm_assigned_dev_intr, 0,
+				"kvm_assigned_msix_device",
+				(void *)dev);
+		/* FIXME: free requested_irq's on failure */
+		if (r)
+			return r;
+	}
+
+	return 0;
+}
+
+#endif
+
+static int assigned_device_enable_guest_intx(struct kvm *kvm,
+				struct kvm_assigned_dev_kernel *dev,
+				struct kvm_assigned_irq *irq)
+{
+	dev->guest_irq = irq->guest_irq;
+	dev->ack_notifier.gsi = irq->guest_irq;
+	return 0;
+}
+
+#ifdef __KVM_HAVE_MSI
+static int assigned_device_enable_guest_msi(struct kvm *kvm,
+			struct kvm_assigned_dev_kernel *dev,
+			struct kvm_assigned_irq *irq)
+{
+	dev->guest_irq = irq->guest_irq;
+	dev->ack_notifier.gsi = -1;
+	dev->host_irq_disabled = false;
+	return 0;
+}
+#endif
+
+#ifdef __KVM_HAVE_MSIX
+static int assigned_device_enable_guest_msix(struct kvm *kvm,
+			struct kvm_assigned_dev_kernel *dev,
+			struct kvm_assigned_irq *irq)
+{
+	dev->guest_irq = irq->guest_irq;
+	dev->ack_notifier.gsi = -1;
+	dev->host_irq_disabled = false;
+	return 0;
+}
+#endif
+
+static int assign_host_irq(struct kvm *kvm,
+			   struct kvm_assigned_dev_kernel *dev,
+			   __u32 host_irq_type)
+{
+	int r = -EEXIST;
+
+	if (dev->irq_requested_type & KVM_DEV_IRQ_HOST_MASK)
+		return r;
+
+	switch (host_irq_type) {
+	case KVM_DEV_IRQ_HOST_INTX:
+		r = assigned_device_enable_host_intx(kvm, dev);
+		break;
+#ifdef __KVM_HAVE_MSI
+	case KVM_DEV_IRQ_HOST_MSI:
+		r = assigned_device_enable_host_msi(kvm, dev);
+		break;
+#endif
+#ifdef __KVM_HAVE_MSIX
+	case KVM_DEV_IRQ_HOST_MSIX:
+		r = assigned_device_enable_host_msix(kvm, dev);
+		break;
+#endif
+	default:
+		r = -EINVAL;
+	}
+
+	if (!r)
+		dev->irq_requested_type |= host_irq_type;
+
+	return r;
+}
+
+static int assign_guest_irq(struct kvm *kvm,
+			    struct kvm_assigned_dev_kernel *dev,
+			    struct kvm_assigned_irq *irq,
+			    unsigned long guest_irq_type)
+{
+	int id;
+	int r = -EEXIST;
+
+	if (dev->irq_requested_type & KVM_DEV_IRQ_GUEST_MASK)
+		return r;
+
+	id = kvm_request_irq_source_id(kvm);
+	if (id < 0)
+		return id;
+
+	dev->irq_source_id = id;
+
+	switch (guest_irq_type) {
+	case KVM_DEV_IRQ_GUEST_INTX:
+		r = assigned_device_enable_guest_intx(kvm, dev, irq);
+		break;
+#ifdef __KVM_HAVE_MSI
+	case KVM_DEV_IRQ_GUEST_MSI:
+		r = assigned_device_enable_guest_msi(kvm, dev, irq);
+		break;
+#endif
+#ifdef __KVM_HAVE_MSIX
+	case KVM_DEV_IRQ_GUEST_MSIX:
+		r = assigned_device_enable_guest_msix(kvm, dev, irq);
+		break;
+#endif
+	default:
+		r = -EINVAL;
+	}
+
+	if (!r) {
+		dev->irq_requested_type |= guest_irq_type;
+		kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
+	} else
+		kvm_free_irq_source_id(kvm, dev->irq_source_id);
+
+	return r;
+}
+
+/* TODO Deal with KVM_DEV_IRQ_ASSIGNED_MASK_MSIX */
+static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
+				   struct kvm_assigned_irq *assigned_irq)
+{
+	int r = -EINVAL;
+	struct kvm_assigned_dev_kernel *match;
+	unsigned long host_irq_type, guest_irq_type;
+
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
+
+	if (!irqchip_in_kernel(kvm))
+		return r;
+
+	mutex_lock(&kvm->lock);
+	r = -ENODEV;
+	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      assigned_irq->assigned_dev_id);
+	if (!match)
+		goto out;
+
+	host_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_HOST_MASK);
+	guest_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_GUEST_MASK);
+
+	r = -EINVAL;
+	/* can only assign one type at a time */
+	if (hweight_long(host_irq_type) > 1)
+		goto out;
+	if (hweight_long(guest_irq_type) > 1)
+		goto out;
+	if (host_irq_type == 0 && guest_irq_type == 0)
+		goto out;
+
+	r = 0;
+	if (host_irq_type)
+		r = assign_host_irq(kvm, match, host_irq_type);
+	if (r)
+		goto out;
+
+	if (guest_irq_type)
+		r = assign_guest_irq(kvm, match, assigned_irq, guest_irq_type);
+out:
+	mutex_unlock(&kvm->lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm,
+					 struct kvm_assigned_irq
+					 *assigned_irq)
+{
+	int r = -ENODEV;
+	struct kvm_assigned_dev_kernel *match;
+
+	mutex_lock(&kvm->lock);
+
+	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      assigned_irq->assigned_dev_id);
+	if (!match)
+		goto out;
+
+	r = kvm_deassign_irq(kvm, match, assigned_irq->flags);
+out:
+	mutex_unlock(&kvm->lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
+				      struct kvm_assigned_pci_dev *assigned_dev)
+{
+	int r = 0;
+	struct kvm_assigned_dev_kernel *match;
+	struct pci_dev *dev;
+
+	down_read(&kvm->slots_lock);
+	mutex_lock(&kvm->lock);
+
+	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      assigned_dev->assigned_dev_id);
+	if (match) {
+		/* device already assigned */
+		r = -EEXIST;
+		goto out;
+	}
+
+	match = kzalloc(sizeof(struct kvm_assigned_dev_kernel), GFP_KERNEL);
+	if (match == NULL) {
+		printk(KERN_INFO "%s: Couldn't allocate memory\n",
+		       __func__);
+		r = -ENOMEM;
+		goto out;
+	}
+	dev = pci_get_bus_and_slot(assigned_dev->busnr,
+				   assigned_dev->devfn);
+	if (!dev) {
+		printk(KERN_INFO "%s: host device not found\n", __func__);
+		r = -EINVAL;
+		goto out_free;
+	}
+	if (pci_enable_device(dev)) {
+		printk(KERN_INFO "%s: Could not enable PCI device\n", __func__);
+		r = -EBUSY;
+		goto out_put;
+	}
+	r = pci_request_regions(dev, "kvm_assigned_device");
+	if (r) {
+		printk(KERN_INFO "%s: Could not get access to device regions\n",
+		       __func__);
+		goto out_disable;
+	}
+
+	pci_reset_function(dev);
+
+	match->assigned_dev_id = assigned_dev->assigned_dev_id;
+	match->host_busnr = assigned_dev->busnr;
+	match->host_devfn = assigned_dev->devfn;
+	match->flags = assigned_dev->flags;
+	match->dev = dev;
+	spin_lock_init(&match->assigned_dev_lock);
+	match->irq_source_id = -1;
+	match->kvm = kvm;
+	match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq;
+	INIT_WORK(&match->interrupt_work,
+		  kvm_assigned_dev_interrupt_work_handler);
+
+	list_add(&match->list, &kvm->arch.assigned_dev_head);
+
+	if (assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU) {
+		if (!kvm->arch.iommu_domain) {
+			r = kvm_iommu_map_guest(kvm);
+			if (r)
+				goto out_list_del;
+		}
+		r = kvm_assign_device(kvm, match);
+		if (r)
+			goto out_list_del;
+	}
+
+out:
+	mutex_unlock(&kvm->lock);
+	up_read(&kvm->slots_lock);
+	return r;
+out_list_del:
+	list_del(&match->list);
+	pci_release_regions(dev);
+out_disable:
+	pci_disable_device(dev);
+out_put:
+	pci_dev_put(dev);
+out_free:
+	kfree(match);
+	mutex_unlock(&kvm->lock);
+	up_read(&kvm->slots_lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_deassign_device(struct kvm *kvm,
+		struct kvm_assigned_pci_dev *assigned_dev)
+{
+	int r = 0;
+	struct kvm_assigned_dev_kernel *match;
+
+	mutex_lock(&kvm->lock);
+
+	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      assigned_dev->assigned_dev_id);
+	if (!match) {
+		printk(KERN_INFO "%s: device hasn't been assigned before, "
+		  "so cannot be deassigned\n", __func__);
+		r = -EINVAL;
+		goto out;
+	}
+
+	if (match->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU)
+		kvm_deassign_device(kvm, match);
+
+	kvm_free_assigned_device(kvm, match);
+
+out:
+	mutex_unlock(&kvm->lock);
+	return r;
+}
+
+
+#ifdef __KVM_HAVE_MSIX
+static int kvm_vm_ioctl_set_msix_nr(struct kvm *kvm,
+				    struct kvm_assigned_msix_nr *entry_nr)
+{
+	int r = 0;
+	struct kvm_assigned_dev_kernel *adev;
+
+	mutex_lock(&kvm->lock);
+
+	adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      entry_nr->assigned_dev_id);
+	if (!adev) {
+		r = -EINVAL;
+		goto msix_nr_out;
+	}
+
+	if (adev->entries_nr == 0) {
+		adev->entries_nr = entry_nr->entry_nr;
+		if (adev->entries_nr == 0 ||
+		    adev->entries_nr >= KVM_MAX_MSIX_PER_DEV) {
+			r = -EINVAL;
+			goto msix_nr_out;
+		}
+
+		adev->host_msix_entries = kzalloc(sizeof(struct msix_entry) *
+						entry_nr->entry_nr,
+						GFP_KERNEL);
+		if (!adev->host_msix_entries) {
+			r = -ENOMEM;
+			goto msix_nr_out;
+		}
+		adev->guest_msix_entries = kzalloc(
+				sizeof(struct kvm_guest_msix_entry) *
+				entry_nr->entry_nr, GFP_KERNEL);
+		if (!adev->guest_msix_entries) {
+			kfree(adev->host_msix_entries);
+			r = -ENOMEM;
+			goto msix_nr_out;
+		}
+	} else /* Not allowed set MSI-X number twice */
+		r = -EINVAL;
+msix_nr_out:
+	mutex_unlock(&kvm->lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_set_msix_entry(struct kvm *kvm,
+				       struct kvm_assigned_msix_entry *entry)
+{
+	int r = 0, i;
+	struct kvm_assigned_dev_kernel *adev;
+
+	mutex_lock(&kvm->lock);
+
+	adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
+				      entry->assigned_dev_id);
+
+	if (!adev) {
+		r = -EINVAL;
+		goto msix_entry_out;
+	}
+
+	for (i = 0; i < adev->entries_nr; i++)
+		if (adev->guest_msix_entries[i].vector == 0 ||
+		    adev->guest_msix_entries[i].entry == entry->entry) {
+			adev->guest_msix_entries[i].entry = entry->entry;
+			adev->guest_msix_entries[i].vector = entry->gsi;
+			adev->host_msix_entries[i].entry = entry->entry;
+			break;
+		}
+	if (i == adev->entries_nr) {
+		r = -ENOSPC;
+		goto msix_entry_out;
+	}
+
+msix_entry_out:
+	mutex_unlock(&kvm->lock);
+
+	return r;
+}
+#endif
+
+long kvm_vm_ioctl_assigned_device(struct kvm *kvm, unsigned ioctl,
+				  unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int r = -ENOTTY;
+
+	switch (ioctl) {
+	case KVM_ASSIGN_PCI_DEVICE: {
+		struct kvm_assigned_pci_dev assigned_dev;
+
+		r = -EFAULT;
+		if (copy_from_user(&assigned_dev, argp, sizeof assigned_dev))
+			goto out;
+		r = kvm_vm_ioctl_assign_device(kvm, &assigned_dev);
+		if (r)
+			goto out;
+		break;
+	}
+	case KVM_ASSIGN_IRQ: {
+		r = -EOPNOTSUPP;
+		break;
+	}
+#ifdef KVM_CAP_ASSIGN_DEV_IRQ
+	case KVM_ASSIGN_DEV_IRQ: {
+		struct kvm_assigned_irq assigned_irq;
+
+		r = -EFAULT;
+		if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq))
+			goto out;
+		r = kvm_vm_ioctl_assign_irq(kvm, &assigned_irq);
+		if (r)
+			goto out;
+		break;
+	}
+	case KVM_DEASSIGN_DEV_IRQ: {
+		struct kvm_assigned_irq assigned_irq;
+
+		r = -EFAULT;
+		if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq))
+			goto out;
+		r = kvm_vm_ioctl_deassign_dev_irq(kvm, &assigned_irq);
+		if (r)
+			goto out;
+		break;
+	}
+#endif
+#ifdef KVM_CAP_DEVICE_DEASSIGNMENT
+	case KVM_DEASSIGN_PCI_DEVICE: {
+		struct kvm_assigned_pci_dev assigned_dev;
+
+		r = -EFAULT;
+		if (copy_from_user(&assigned_dev, argp, sizeof assigned_dev))
+			goto out;
+		r = kvm_vm_ioctl_deassign_device(kvm, &assigned_dev);
+		if (r)
+			goto out;
+		break;
+	}
+#endif
+#ifdef KVM_CAP_IRQ_ROUTING
+	case KVM_SET_GSI_ROUTING: {
+		struct kvm_irq_routing routing;
+		struct kvm_irq_routing __user *urouting;
+		struct kvm_irq_routing_entry *entries;
+
+		r = -EFAULT;
+		if (copy_from_user(&routing, argp, sizeof(routing)))
+			goto out;
+		r = -EINVAL;
+		if (routing.nr >= KVM_MAX_IRQ_ROUTES)
+			goto out;
+		if (routing.flags)
+			goto out;
+		r = -ENOMEM;
+		entries = vmalloc(routing.nr * sizeof(*entries));
+		if (!entries)
+			goto out;
+		r = -EFAULT;
+		urouting = argp;
+		if (copy_from_user(entries, urouting->entries,
+				   routing.nr * sizeof(*entries)))
+			goto out_free_irq_routing;
+		r = kvm_set_irq_routing(kvm, entries, routing.nr,
+					routing.flags);
+	out_free_irq_routing:
+		vfree(entries);
+		break;
+	}
+#endif /* KVM_CAP_IRQ_ROUTING */
+#ifdef __KVM_HAVE_MSIX
+	case KVM_ASSIGN_SET_MSIX_NR: {
+		struct kvm_assigned_msix_nr entry_nr;
+		r = -EFAULT;
+		if (copy_from_user(&entry_nr, argp, sizeof entry_nr))
+			goto out;
+		r = kvm_vm_ioctl_set_msix_nr(kvm, &entry_nr);
+		if (r)
+			goto out;
+		break;
+	}
+	case KVM_ASSIGN_SET_MSIX_ENTRY: {
+		struct kvm_assigned_msix_entry entry;
+		r = -EFAULT;
+		if (copy_from_user(&entry, argp, sizeof entry))
+			goto out;
+		r = kvm_vm_ioctl_set_msix_entry(kvm, &entry);
+		if (r)
+			goto out;
+		break;
+	}
+#endif
+	}
+out:
+	return r;
+}
+
diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index bb4ebd8..30f70fd 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -61,10 +61,8 @@
 	struct _irqfd *irqfd = container_of(work, struct _irqfd, inject);
 	struct kvm *kvm = irqfd->kvm;
 
-	mutex_lock(&kvm->irq_lock);
 	kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 1);
 	kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 0);
-	mutex_unlock(&kvm->irq_lock);
 }
 
 /*
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 9fe140b..38a2d20 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -182,6 +182,7 @@
 	union kvm_ioapic_redirect_entry entry;
 	int ret = 1;
 
+	mutex_lock(&ioapic->lock);
 	if (irq >= 0 && irq < IOAPIC_NUM_PINS) {
 		entry = ioapic->redirtbl[irq];
 		level ^= entry.fields.polarity;
@@ -198,34 +199,51 @@
 		}
 		trace_kvm_ioapic_set_irq(entry.bits, irq, ret == 0);
 	}
+	mutex_unlock(&ioapic->lock);
+
 	return ret;
 }
 
-static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int pin,
-				    int trigger_mode)
+static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int vector,
+				     int trigger_mode)
 {
-	union kvm_ioapic_redirect_entry *ent;
+	int i;
 
-	ent = &ioapic->redirtbl[pin];
+	for (i = 0; i < IOAPIC_NUM_PINS; i++) {
+		union kvm_ioapic_redirect_entry *ent = &ioapic->redirtbl[i];
 
-	kvm_notify_acked_irq(ioapic->kvm, KVM_IRQCHIP_IOAPIC, pin);
+		if (ent->fields.vector != vector)
+			continue;
 
-	if (trigger_mode == IOAPIC_LEVEL_TRIG) {
+		/*
+		 * We are dropping lock while calling ack notifiers because ack
+		 * notifier callbacks for assigned devices call into IOAPIC
+		 * recursively. Since remote_irr is cleared only after call
+		 * to notifiers if the same vector will be delivered while lock
+		 * is dropped it will be put into irr and will be delivered
+		 * after ack notifier returns.
+		 */
+		mutex_unlock(&ioapic->lock);
+		kvm_notify_acked_irq(ioapic->kvm, KVM_IRQCHIP_IOAPIC, i);
+		mutex_lock(&ioapic->lock);
+
+		if (trigger_mode != IOAPIC_LEVEL_TRIG)
+			continue;
+
 		ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG);
 		ent->fields.remote_irr = 0;
-		if (!ent->fields.mask && (ioapic->irr & (1 << pin)))
-			ioapic_service(ioapic, pin);
+		if (!ent->fields.mask && (ioapic->irr & (1 << i)))
+			ioapic_service(ioapic, i);
 	}
 }
 
 void kvm_ioapic_update_eoi(struct kvm *kvm, int vector, int trigger_mode)
 {
 	struct kvm_ioapic *ioapic = kvm->arch.vioapic;
-	int i;
 
-	for (i = 0; i < IOAPIC_NUM_PINS; i++)
-		if (ioapic->redirtbl[i].fields.vector == vector)
-			__kvm_ioapic_update_eoi(ioapic, i, trigger_mode);
+	mutex_lock(&ioapic->lock);
+	__kvm_ioapic_update_eoi(ioapic, vector, trigger_mode);
+	mutex_unlock(&ioapic->lock);
 }
 
 static inline struct kvm_ioapic *to_ioapic(struct kvm_io_device *dev)
@@ -250,8 +268,8 @@
 	ioapic_debug("addr %lx\n", (unsigned long)addr);
 	ASSERT(!(addr & 0xf));	/* check alignment */
 
-	mutex_lock(&ioapic->kvm->irq_lock);
 	addr &= 0xff;
+	mutex_lock(&ioapic->lock);
 	switch (addr) {
 	case IOAPIC_REG_SELECT:
 		result = ioapic->ioregsel;
@@ -265,6 +283,8 @@
 		result = 0;
 		break;
 	}
+	mutex_unlock(&ioapic->lock);
+
 	switch (len) {
 	case 8:
 		*(u64 *) val = result;
@@ -277,7 +297,6 @@
 	default:
 		printk(KERN_WARNING "ioapic: wrong length %d\n", len);
 	}
-	mutex_unlock(&ioapic->kvm->irq_lock);
 	return 0;
 }
 
@@ -293,15 +312,15 @@
 		     (void*)addr, len, val);
 	ASSERT(!(addr & 0xf));	/* check alignment */
 
-	mutex_lock(&ioapic->kvm->irq_lock);
 	if (len == 4 || len == 8)
 		data = *(u32 *) val;
 	else {
 		printk(KERN_WARNING "ioapic: Unsupported size %d\n", len);
-		goto unlock;
+		return 0;
 	}
 
 	addr &= 0xff;
+	mutex_lock(&ioapic->lock);
 	switch (addr) {
 	case IOAPIC_REG_SELECT:
 		ioapic->ioregsel = data;
@@ -312,15 +331,14 @@
 		break;
 #ifdef	CONFIG_IA64
 	case IOAPIC_REG_EOI:
-		kvm_ioapic_update_eoi(ioapic->kvm, data, IOAPIC_LEVEL_TRIG);
+		__kvm_ioapic_update_eoi(ioapic, data, IOAPIC_LEVEL_TRIG);
 		break;
 #endif
 
 	default:
 		break;
 	}
-unlock:
-	mutex_unlock(&ioapic->kvm->irq_lock);
+	mutex_unlock(&ioapic->lock);
 	return 0;
 }
 
@@ -349,6 +367,7 @@
 	ioapic = kzalloc(sizeof(struct kvm_ioapic), GFP_KERNEL);
 	if (!ioapic)
 		return -ENOMEM;
+	mutex_init(&ioapic->lock);
 	kvm->arch.vioapic = ioapic;
 	kvm_ioapic_reset(ioapic);
 	kvm_iodevice_init(&ioapic->dev, &ioapic_mmio_ops);
@@ -360,3 +379,26 @@
 	return ret;
 }
 
+int kvm_get_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state)
+{
+	struct kvm_ioapic *ioapic = ioapic_irqchip(kvm);
+	if (!ioapic)
+		return -EINVAL;
+
+	mutex_lock(&ioapic->lock);
+	memcpy(state, ioapic, sizeof(struct kvm_ioapic_state));
+	mutex_unlock(&ioapic->lock);
+	return 0;
+}
+
+int kvm_set_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state)
+{
+	struct kvm_ioapic *ioapic = ioapic_irqchip(kvm);
+	if (!ioapic)
+		return -EINVAL;
+
+	mutex_lock(&ioapic->lock);
+	memcpy(ioapic, state, sizeof(struct kvm_ioapic_state));
+	mutex_unlock(&ioapic->lock);
+	return 0;
+}
diff --git a/virt/kvm/ioapic.h b/virt/kvm/ioapic.h
index 7080b71..419c43b 100644
--- a/virt/kvm/ioapic.h
+++ b/virt/kvm/ioapic.h
@@ -41,9 +41,11 @@
 	u32 irr;
 	u32 pad;
 	union kvm_ioapic_redirect_entry redirtbl[IOAPIC_NUM_PINS];
+	unsigned long irq_states[IOAPIC_NUM_PINS];
 	struct kvm_io_device dev;
 	struct kvm *kvm;
 	void (*ack_notifier)(void *opaque, int irq);
+	struct mutex lock;
 };
 
 #ifdef DEBUG
@@ -73,4 +75,7 @@
 void kvm_ioapic_reset(struct kvm_ioapic *ioapic);
 int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
 		struct kvm_lapic_irq *irq);
+int kvm_get_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state);
+int kvm_set_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state);
+
 #endif
diff --git a/virt/kvm/irq_comm.c b/virt/kvm/irq_comm.c
index 001663f..9b07734 100644
--- a/virt/kvm/irq_comm.c
+++ b/virt/kvm/irq_comm.c
@@ -31,20 +31,39 @@
 
 #include "ioapic.h"
 
+static inline int kvm_irq_line_state(unsigned long *irq_state,
+				     int irq_source_id, int level)
+{
+	/* Logical OR for level trig interrupt */
+	if (level)
+		set_bit(irq_source_id, irq_state);
+	else
+		clear_bit(irq_source_id, irq_state);
+
+	return !!(*irq_state);
+}
+
 static int kvm_set_pic_irq(struct kvm_kernel_irq_routing_entry *e,
-			   struct kvm *kvm, int level)
+			   struct kvm *kvm, int irq_source_id, int level)
 {
 #ifdef CONFIG_X86
-	return kvm_pic_set_irq(pic_irqchip(kvm), e->irqchip.pin, level);
+	struct kvm_pic *pic = pic_irqchip(kvm);
+	level = kvm_irq_line_state(&pic->irq_states[e->irqchip.pin],
+				   irq_source_id, level);
+	return kvm_pic_set_irq(pic, e->irqchip.pin, level);
 #else
 	return -1;
 #endif
 }
 
 static int kvm_set_ioapic_irq(struct kvm_kernel_irq_routing_entry *e,
-			      struct kvm *kvm, int level)
+			      struct kvm *kvm, int irq_source_id, int level)
 {
-	return kvm_ioapic_set_irq(kvm->arch.vioapic, e->irqchip.pin, level);
+	struct kvm_ioapic *ioapic = kvm->arch.vioapic;
+	level = kvm_irq_line_state(&ioapic->irq_states[e->irqchip.pin],
+				   irq_source_id, level);
+
+	return kvm_ioapic_set_irq(ioapic, e->irqchip.pin, level);
 }
 
 inline static bool kvm_is_dm_lowest_prio(struct kvm_lapic_irq *irq)
@@ -63,8 +82,6 @@
 	int i, r = -1;
 	struct kvm_vcpu *vcpu, *lowest = NULL;
 
-	WARN_ON(!mutex_is_locked(&kvm->irq_lock));
-
 	if (irq->dest_mode == 0 && irq->dest_id == 0xff &&
 			kvm_is_dm_lowest_prio(irq))
 		printk(KERN_INFO "kvm: apic: phys broadcast and lowest prio\n");
@@ -96,10 +113,13 @@
 }
 
 static int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e,
-		       struct kvm *kvm, int level)
+		       struct kvm *kvm, int irq_source_id, int level)
 {
 	struct kvm_lapic_irq irq;
 
+	if (!level)
+		return -1;
+
 	trace_kvm_msi_set_irq(e->msi.address_lo, e->msi.data);
 
 	irq.dest_id = (e->msi.address_lo &
@@ -116,78 +136,67 @@
 	return kvm_irq_delivery_to_apic(kvm, NULL, &irq);
 }
 
-/* This should be called with the kvm->irq_lock mutex held
+/*
  * Return value:
  *  < 0   Interrupt was ignored (masked or not delivered for other reasons)
  *  = 0   Interrupt was coalesced (previous irq is still pending)
  *  > 0   Number of CPUs interrupt was delivered to
  */
-int kvm_set_irq(struct kvm *kvm, int irq_source_id, int irq, int level)
+int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level)
 {
-	struct kvm_kernel_irq_routing_entry *e;
-	unsigned long *irq_state, sig_level;
-	int ret = -1;
+	struct kvm_kernel_irq_routing_entry *e, irq_set[KVM_NR_IRQCHIPS];
+	int ret = -1, i = 0;
+	struct kvm_irq_routing_table *irq_rt;
+	struct hlist_node *n;
 
 	trace_kvm_set_irq(irq, level, irq_source_id);
 
-	WARN_ON(!mutex_is_locked(&kvm->irq_lock));
-
-	if (irq < KVM_IOAPIC_NUM_PINS) {
-		irq_state = (unsigned long *)&kvm->arch.irq_states[irq];
-
-		/* Logical OR for level trig interrupt */
-		if (level)
-			set_bit(irq_source_id, irq_state);
-		else
-			clear_bit(irq_source_id, irq_state);
-		sig_level = !!(*irq_state);
-	} else if (!level)
-		return ret;
-	else /* Deal with MSI/MSI-X */
-		sig_level = 1;
-
 	/* Not possible to detect if the guest uses the PIC or the
 	 * IOAPIC.  So set the bit in both. The guest will ignore
 	 * writes to the unused one.
 	 */
-	list_for_each_entry(e, &kvm->irq_routing, link)
-		if (e->gsi == irq) {
-			int r = e->set(e, kvm, sig_level);
-			if (r < 0)
-				continue;
+	rcu_read_lock();
+	irq_rt = rcu_dereference(kvm->irq_routing);
+	if (irq < irq_rt->nr_rt_entries)
+		hlist_for_each_entry(e, n, &irq_rt->map[irq], link)
+			irq_set[i++] = *e;
+	rcu_read_unlock();
 
-			ret = r + ((ret < 0) ? 0 : ret);
-		}
+	while(i--) {
+		int r;
+		r = irq_set[i].set(&irq_set[i], kvm, irq_source_id, level);
+		if (r < 0)
+			continue;
+
+		ret = r + ((ret < 0) ? 0 : ret);
+	}
+
 	return ret;
 }
 
 void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin)
 {
-	struct kvm_kernel_irq_routing_entry *e;
 	struct kvm_irq_ack_notifier *kian;
 	struct hlist_node *n;
-	unsigned gsi = pin;
+	int gsi;
 
 	trace_kvm_ack_irq(irqchip, pin);
 
-	list_for_each_entry(e, &kvm->irq_routing, link)
-		if (e->type == KVM_IRQ_ROUTING_IRQCHIP &&
-		    e->irqchip.irqchip == irqchip &&
-		    e->irqchip.pin == pin) {
-			gsi = e->gsi;
-			break;
-		}
-
-	hlist_for_each_entry(kian, n, &kvm->arch.irq_ack_notifier_list, link)
-		if (kian->gsi == gsi)
-			kian->irq_acked(kian);
+	rcu_read_lock();
+	gsi = rcu_dereference(kvm->irq_routing)->chip[irqchip][pin];
+	if (gsi != -1)
+		hlist_for_each_entry_rcu(kian, n, &kvm->irq_ack_notifier_list,
+					 link)
+			if (kian->gsi == gsi)
+				kian->irq_acked(kian);
+	rcu_read_unlock();
 }
 
 void kvm_register_irq_ack_notifier(struct kvm *kvm,
 				   struct kvm_irq_ack_notifier *kian)
 {
 	mutex_lock(&kvm->irq_lock);
-	hlist_add_head(&kian->link, &kvm->arch.irq_ack_notifier_list);
+	hlist_add_head_rcu(&kian->link, &kvm->irq_ack_notifier_list);
 	mutex_unlock(&kvm->irq_lock);
 }
 
@@ -195,8 +204,9 @@
 				    struct kvm_irq_ack_notifier *kian)
 {
 	mutex_lock(&kvm->irq_lock);
-	hlist_del_init(&kian->link);
+	hlist_del_init_rcu(&kian->link);
 	mutex_unlock(&kvm->irq_lock);
+	synchronize_rcu();
 }
 
 int kvm_request_irq_source_id(struct kvm *kvm)
@@ -205,16 +215,17 @@
 	int irq_source_id;
 
 	mutex_lock(&kvm->irq_lock);
-	irq_source_id = find_first_zero_bit(bitmap,
-				sizeof(kvm->arch.irq_sources_bitmap));
+	irq_source_id = find_first_zero_bit(bitmap, BITS_PER_LONG);
 
-	if (irq_source_id >= sizeof(kvm->arch.irq_sources_bitmap)) {
+	if (irq_source_id >= BITS_PER_LONG) {
 		printk(KERN_WARNING "kvm: exhaust allocatable IRQ sources!\n");
-		return -EFAULT;
+		irq_source_id = -EFAULT;
+		goto unlock;
 	}
 
 	ASSERT(irq_source_id != KVM_USERSPACE_IRQ_SOURCE_ID);
 	set_bit(irq_source_id, bitmap);
+unlock:
 	mutex_unlock(&kvm->irq_lock);
 
 	return irq_source_id;
@@ -228,13 +239,23 @@
 
 	mutex_lock(&kvm->irq_lock);
 	if (irq_source_id < 0 ||
-	    irq_source_id >= sizeof(kvm->arch.irq_sources_bitmap)) {
+	    irq_source_id >= BITS_PER_LONG) {
 		printk(KERN_ERR "kvm: IRQ source ID out of range!\n");
-		return;
+		goto unlock;
 	}
-	for (i = 0; i < KVM_IOAPIC_NUM_PINS; i++)
-		clear_bit(irq_source_id, &kvm->arch.irq_states[i]);
 	clear_bit(irq_source_id, &kvm->arch.irq_sources_bitmap);
+	if (!irqchip_in_kernel(kvm))
+		goto unlock;
+
+	for (i = 0; i < KVM_IOAPIC_NUM_PINS; i++) {
+		clear_bit(irq_source_id, &kvm->arch.vioapic->irq_states[i]);
+		if (i >= 16)
+			continue;
+#ifdef CONFIG_X86
+		clear_bit(irq_source_id, &pic_irqchip(kvm)->irq_states[i]);
+#endif
+	}
+unlock:
 	mutex_unlock(&kvm->irq_lock);
 }
 
@@ -243,7 +264,7 @@
 {
 	mutex_lock(&kvm->irq_lock);
 	kimn->irq = irq;
-	hlist_add_head(&kimn->link, &kvm->mask_notifier_list);
+	hlist_add_head_rcu(&kimn->link, &kvm->mask_notifier_list);
 	mutex_unlock(&kvm->irq_lock);
 }
 
@@ -251,8 +272,9 @@
 				      struct kvm_irq_mask_notifier *kimn)
 {
 	mutex_lock(&kvm->irq_lock);
-	hlist_del(&kimn->link);
+	hlist_del_rcu(&kimn->link);
 	mutex_unlock(&kvm->irq_lock);
+	synchronize_rcu();
 }
 
 void kvm_fire_mask_notifiers(struct kvm *kvm, int irq, bool mask)
@@ -260,33 +282,37 @@
 	struct kvm_irq_mask_notifier *kimn;
 	struct hlist_node *n;
 
-	WARN_ON(!mutex_is_locked(&kvm->irq_lock));
-
-	hlist_for_each_entry(kimn, n, &kvm->mask_notifier_list, link)
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(kimn, n, &kvm->mask_notifier_list, link)
 		if (kimn->irq == irq)
 			kimn->func(kimn, mask);
-}
-
-static void __kvm_free_irq_routing(struct list_head *irq_routing)
-{
-	struct kvm_kernel_irq_routing_entry *e, *n;
-
-	list_for_each_entry_safe(e, n, irq_routing, link)
-		kfree(e);
+	rcu_read_unlock();
 }
 
 void kvm_free_irq_routing(struct kvm *kvm)
 {
-	mutex_lock(&kvm->irq_lock);
-	__kvm_free_irq_routing(&kvm->irq_routing);
-	mutex_unlock(&kvm->irq_lock);
+	/* Called only during vm destruction. Nobody can use the pointer
+	   at this stage */
+	kfree(kvm->irq_routing);
 }
 
-static int setup_routing_entry(struct kvm_kernel_irq_routing_entry *e,
+static int setup_routing_entry(struct kvm_irq_routing_table *rt,
+			       struct kvm_kernel_irq_routing_entry *e,
 			       const struct kvm_irq_routing_entry *ue)
 {
 	int r = -EINVAL;
 	int delta;
+	struct kvm_kernel_irq_routing_entry *ei;
+	struct hlist_node *n;
+
+	/*
+	 * Do not allow GSI to be mapped to the same irqchip more than once.
+	 * Allow only one to one mapping between GSI and MSI.
+	 */
+	hlist_for_each_entry(ei, n, &rt->map[ue->gsi], link)
+		if (ei->type == KVM_IRQ_ROUTING_MSI ||
+		    ue->u.irqchip.irqchip == ei->irqchip.irqchip)
+			return r;
 
 	e->gsi = ue->gsi;
 	e->type = ue->type;
@@ -309,6 +335,9 @@
 		}
 		e->irqchip.irqchip = ue->u.irqchip.irqchip;
 		e->irqchip.pin = ue->u.irqchip.pin + delta;
+		if (e->irqchip.pin >= KVM_IOAPIC_NUM_PINS)
+			goto out;
+		rt->chip[ue->u.irqchip.irqchip][e->irqchip.pin] = ue->gsi;
 		break;
 	case KVM_IRQ_ROUTING_MSI:
 		e->set = kvm_set_msi;
@@ -319,6 +348,8 @@
 	default:
 		goto out;
 	}
+
+	hlist_add_head(&e->link, &rt->map[e->gsi]);
 	r = 0;
 out:
 	return r;
@@ -330,43 +361,53 @@
 			unsigned nr,
 			unsigned flags)
 {
-	struct list_head irq_list = LIST_HEAD_INIT(irq_list);
-	struct list_head tmp = LIST_HEAD_INIT(tmp);
-	struct kvm_kernel_irq_routing_entry *e = NULL;
-	unsigned i;
+	struct kvm_irq_routing_table *new, *old;
+	u32 i, j, nr_rt_entries = 0;
 	int r;
 
 	for (i = 0; i < nr; ++i) {
+		if (ue[i].gsi >= KVM_MAX_IRQ_ROUTES)
+			return -EINVAL;
+		nr_rt_entries = max(nr_rt_entries, ue[i].gsi);
+	}
+
+	nr_rt_entries += 1;
+
+	new = kzalloc(sizeof(*new) + (nr_rt_entries * sizeof(struct hlist_head))
+		      + (nr * sizeof(struct kvm_kernel_irq_routing_entry)),
+		      GFP_KERNEL);
+
+	if (!new)
+		return -ENOMEM;
+
+	new->rt_entries = (void *)&new->map[nr_rt_entries];
+
+	new->nr_rt_entries = nr_rt_entries;
+	for (i = 0; i < 3; i++)
+		for (j = 0; j < KVM_IOAPIC_NUM_PINS; j++)
+			new->chip[i][j] = -1;
+
+	for (i = 0; i < nr; ++i) {
 		r = -EINVAL;
-		if (ue->gsi >= KVM_MAX_IRQ_ROUTES)
-			goto out;
 		if (ue->flags)
 			goto out;
-		r = -ENOMEM;
-		e = kzalloc(sizeof(*e), GFP_KERNEL);
-		if (!e)
-			goto out;
-		r = setup_routing_entry(e, ue);
+		r = setup_routing_entry(new, &new->rt_entries[i], ue);
 		if (r)
 			goto out;
 		++ue;
-		list_add(&e->link, &irq_list);
-		e = NULL;
 	}
 
 	mutex_lock(&kvm->irq_lock);
-	list_splice(&kvm->irq_routing, &tmp);
-	INIT_LIST_HEAD(&kvm->irq_routing);
-	list_splice(&irq_list, &kvm->irq_routing);
-	INIT_LIST_HEAD(&irq_list);
-	list_splice(&tmp, &irq_list);
+	old = kvm->irq_routing;
+	rcu_assign_pointer(kvm->irq_routing, new);
 	mutex_unlock(&kvm->irq_lock);
+	synchronize_rcu();
 
+	new = old;
 	r = 0;
 
 out:
-	kfree(e);
-	__kvm_free_irq_routing(&irq_list);
+	kfree(new);
 	return r;
 }
 
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index cdca639..e1f2bf8 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -43,6 +43,7 @@
 #include <linux/swap.h>
 #include <linux/bitops.h>
 #include <linux/spinlock.h>
+#include <linux/compat.h>
 
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -54,12 +55,6 @@
 #include "coalesced_mmio.h"
 #endif
 
-#ifdef KVM_CAP_DEVICE_ASSIGNMENT
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include "irq.h"
-#endif
-
 #define CREATE_TRACE_POINTS
 #include <trace/events/kvm.h>
 
@@ -76,6 +71,8 @@
 LIST_HEAD(vm_list);
 
 static cpumask_var_t cpus_hardware_enabled;
+static int kvm_usage_count = 0;
+static atomic_t hardware_enable_failed;
 
 struct kmem_cache *kvm_vcpu_cache;
 EXPORT_SYMBOL_GPL(kvm_vcpu_cache);
@@ -86,615 +83,13 @@
 
 static long kvm_vcpu_ioctl(struct file *file, unsigned int ioctl,
 			   unsigned long arg);
+static int hardware_enable_all(void);
+static void hardware_disable_all(void);
 
 static bool kvm_rebooting;
 
 static bool largepages_enabled = true;
 
-#ifdef KVM_CAP_DEVICE_ASSIGNMENT
-static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
-						      int assigned_dev_id)
-{
-	struct list_head *ptr;
-	struct kvm_assigned_dev_kernel *match;
-
-	list_for_each(ptr, head) {
-		match = list_entry(ptr, struct kvm_assigned_dev_kernel, list);
-		if (match->assigned_dev_id == assigned_dev_id)
-			return match;
-	}
-	return NULL;
-}
-
-static int find_index_from_host_irq(struct kvm_assigned_dev_kernel
-				    *assigned_dev, int irq)
-{
-	int i, index;
-	struct msix_entry *host_msix_entries;
-
-	host_msix_entries = assigned_dev->host_msix_entries;
-
-	index = -1;
-	for (i = 0; i < assigned_dev->entries_nr; i++)
-		if (irq == host_msix_entries[i].vector) {
-			index = i;
-			break;
-		}
-	if (index < 0) {
-		printk(KERN_WARNING "Fail to find correlated MSI-X entry!\n");
-		return 0;
-	}
-
-	return index;
-}
-
-static void kvm_assigned_dev_interrupt_work_handler(struct work_struct *work)
-{
-	struct kvm_assigned_dev_kernel *assigned_dev;
-	struct kvm *kvm;
-	int i;
-
-	assigned_dev = container_of(work, struct kvm_assigned_dev_kernel,
-				    interrupt_work);
-	kvm = assigned_dev->kvm;
-
-	mutex_lock(&kvm->irq_lock);
-	spin_lock_irq(&assigned_dev->assigned_dev_lock);
-	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
-		struct kvm_guest_msix_entry *guest_entries =
-			assigned_dev->guest_msix_entries;
-		for (i = 0; i < assigned_dev->entries_nr; i++) {
-			if (!(guest_entries[i].flags &
-					KVM_ASSIGNED_MSIX_PENDING))
-				continue;
-			guest_entries[i].flags &= ~KVM_ASSIGNED_MSIX_PENDING;
-			kvm_set_irq(assigned_dev->kvm,
-				    assigned_dev->irq_source_id,
-				    guest_entries[i].vector, 1);
-		}
-	} else
-		kvm_set_irq(assigned_dev->kvm, assigned_dev->irq_source_id,
-			    assigned_dev->guest_irq, 1);
-
-	spin_unlock_irq(&assigned_dev->assigned_dev_lock);
-	mutex_unlock(&assigned_dev->kvm->irq_lock);
-}
-
-static irqreturn_t kvm_assigned_dev_intr(int irq, void *dev_id)
-{
-	unsigned long flags;
-	struct kvm_assigned_dev_kernel *assigned_dev =
-		(struct kvm_assigned_dev_kernel *) dev_id;
-
-	spin_lock_irqsave(&assigned_dev->assigned_dev_lock, flags);
-	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
-		int index = find_index_from_host_irq(assigned_dev, irq);
-		if (index < 0)
-			goto out;
-		assigned_dev->guest_msix_entries[index].flags |=
-			KVM_ASSIGNED_MSIX_PENDING;
-	}
-
-	schedule_work(&assigned_dev->interrupt_work);
-
-	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_GUEST_INTX) {
-		disable_irq_nosync(irq);
-		assigned_dev->host_irq_disabled = true;
-	}
-
-out:
-	spin_unlock_irqrestore(&assigned_dev->assigned_dev_lock, flags);
-	return IRQ_HANDLED;
-}
-
-/* Ack the irq line for an assigned device */
-static void kvm_assigned_dev_ack_irq(struct kvm_irq_ack_notifier *kian)
-{
-	struct kvm_assigned_dev_kernel *dev;
-	unsigned long flags;
-
-	if (kian->gsi == -1)
-		return;
-
-	dev = container_of(kian, struct kvm_assigned_dev_kernel,
-			   ack_notifier);
-
-	kvm_set_irq(dev->kvm, dev->irq_source_id, dev->guest_irq, 0);
-
-	/* The guest irq may be shared so this ack may be
-	 * from another device.
-	 */
-	spin_lock_irqsave(&dev->assigned_dev_lock, flags);
-	if (dev->host_irq_disabled) {
-		enable_irq(dev->host_irq);
-		dev->host_irq_disabled = false;
-	}
-	spin_unlock_irqrestore(&dev->assigned_dev_lock, flags);
-}
-
-static void deassign_guest_irq(struct kvm *kvm,
-			       struct kvm_assigned_dev_kernel *assigned_dev)
-{
-	kvm_unregister_irq_ack_notifier(kvm, &assigned_dev->ack_notifier);
-	assigned_dev->ack_notifier.gsi = -1;
-
-	if (assigned_dev->irq_source_id != -1)
-		kvm_free_irq_source_id(kvm, assigned_dev->irq_source_id);
-	assigned_dev->irq_source_id = -1;
-	assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_GUEST_MASK);
-}
-
-/* The function implicit hold kvm->lock mutex due to cancel_work_sync() */
-static void deassign_host_irq(struct kvm *kvm,
-			      struct kvm_assigned_dev_kernel *assigned_dev)
-{
-	/*
-	 * In kvm_free_device_irq, cancel_work_sync return true if:
-	 * 1. work is scheduled, and then cancelled.
-	 * 2. work callback is executed.
-	 *
-	 * The first one ensured that the irq is disabled and no more events
-	 * would happen. But for the second one, the irq may be enabled (e.g.
-	 * for MSI). So we disable irq here to prevent further events.
-	 *
-	 * Notice this maybe result in nested disable if the interrupt type is
-	 * INTx, but it's OK for we are going to free it.
-	 *
-	 * If this function is a part of VM destroy, please ensure that till
-	 * now, the kvm state is still legal for probably we also have to wait
-	 * interrupt_work done.
-	 */
-	if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSIX) {
-		int i;
-		for (i = 0; i < assigned_dev->entries_nr; i++)
-			disable_irq_nosync(assigned_dev->
-					   host_msix_entries[i].vector);
-
-		cancel_work_sync(&assigned_dev->interrupt_work);
-
-		for (i = 0; i < assigned_dev->entries_nr; i++)
-			free_irq(assigned_dev->host_msix_entries[i].vector,
-				 (void *)assigned_dev);
-
-		assigned_dev->entries_nr = 0;
-		kfree(assigned_dev->host_msix_entries);
-		kfree(assigned_dev->guest_msix_entries);
-		pci_disable_msix(assigned_dev->dev);
-	} else {
-		/* Deal with MSI and INTx */
-		disable_irq_nosync(assigned_dev->host_irq);
-		cancel_work_sync(&assigned_dev->interrupt_work);
-
-		free_irq(assigned_dev->host_irq, (void *)assigned_dev);
-
-		if (assigned_dev->irq_requested_type & KVM_DEV_IRQ_HOST_MSI)
-			pci_disable_msi(assigned_dev->dev);
-	}
-
-	assigned_dev->irq_requested_type &= ~(KVM_DEV_IRQ_HOST_MASK);
-}
-
-static int kvm_deassign_irq(struct kvm *kvm,
-			    struct kvm_assigned_dev_kernel *assigned_dev,
-			    unsigned long irq_requested_type)
-{
-	unsigned long guest_irq_type, host_irq_type;
-
-	if (!irqchip_in_kernel(kvm))
-		return -EINVAL;
-	/* no irq assignment to deassign */
-	if (!assigned_dev->irq_requested_type)
-		return -ENXIO;
-
-	host_irq_type = irq_requested_type & KVM_DEV_IRQ_HOST_MASK;
-	guest_irq_type = irq_requested_type & KVM_DEV_IRQ_GUEST_MASK;
-
-	if (host_irq_type)
-		deassign_host_irq(kvm, assigned_dev);
-	if (guest_irq_type)
-		deassign_guest_irq(kvm, assigned_dev);
-
-	return 0;
-}
-
-static void kvm_free_assigned_irq(struct kvm *kvm,
-				  struct kvm_assigned_dev_kernel *assigned_dev)
-{
-	kvm_deassign_irq(kvm, assigned_dev, assigned_dev->irq_requested_type);
-}
-
-static void kvm_free_assigned_device(struct kvm *kvm,
-				     struct kvm_assigned_dev_kernel
-				     *assigned_dev)
-{
-	kvm_free_assigned_irq(kvm, assigned_dev);
-
-	pci_reset_function(assigned_dev->dev);
-
-	pci_release_regions(assigned_dev->dev);
-	pci_disable_device(assigned_dev->dev);
-	pci_dev_put(assigned_dev->dev);
-
-	list_del(&assigned_dev->list);
-	kfree(assigned_dev);
-}
-
-void kvm_free_all_assigned_devices(struct kvm *kvm)
-{
-	struct list_head *ptr, *ptr2;
-	struct kvm_assigned_dev_kernel *assigned_dev;
-
-	list_for_each_safe(ptr, ptr2, &kvm->arch.assigned_dev_head) {
-		assigned_dev = list_entry(ptr,
-					  struct kvm_assigned_dev_kernel,
-					  list);
-
-		kvm_free_assigned_device(kvm, assigned_dev);
-	}
-}
-
-static int assigned_device_enable_host_intx(struct kvm *kvm,
-					    struct kvm_assigned_dev_kernel *dev)
-{
-	dev->host_irq = dev->dev->irq;
-	/* Even though this is PCI, we don't want to use shared
-	 * interrupts. Sharing host devices with guest-assigned devices
-	 * on the same interrupt line is not a happy situation: there
-	 * are going to be long delays in accepting, acking, etc.
-	 */
-	if (request_irq(dev->host_irq, kvm_assigned_dev_intr,
-			0, "kvm_assigned_intx_device", (void *)dev))
-		return -EIO;
-	return 0;
-}
-
-#ifdef __KVM_HAVE_MSI
-static int assigned_device_enable_host_msi(struct kvm *kvm,
-					   struct kvm_assigned_dev_kernel *dev)
-{
-	int r;
-
-	if (!dev->dev->msi_enabled) {
-		r = pci_enable_msi(dev->dev);
-		if (r)
-			return r;
-	}
-
-	dev->host_irq = dev->dev->irq;
-	if (request_irq(dev->host_irq, kvm_assigned_dev_intr, 0,
-			"kvm_assigned_msi_device", (void *)dev)) {
-		pci_disable_msi(dev->dev);
-		return -EIO;
-	}
-
-	return 0;
-}
-#endif
-
-#ifdef __KVM_HAVE_MSIX
-static int assigned_device_enable_host_msix(struct kvm *kvm,
-					    struct kvm_assigned_dev_kernel *dev)
-{
-	int i, r = -EINVAL;
-
-	/* host_msix_entries and guest_msix_entries should have been
-	 * initialized */
-	if (dev->entries_nr == 0)
-		return r;
-
-	r = pci_enable_msix(dev->dev, dev->host_msix_entries, dev->entries_nr);
-	if (r)
-		return r;
-
-	for (i = 0; i < dev->entries_nr; i++) {
-		r = request_irq(dev->host_msix_entries[i].vector,
-				kvm_assigned_dev_intr, 0,
-				"kvm_assigned_msix_device",
-				(void *)dev);
-		/* FIXME: free requested_irq's on failure */
-		if (r)
-			return r;
-	}
-
-	return 0;
-}
-
-#endif
-
-static int assigned_device_enable_guest_intx(struct kvm *kvm,
-				struct kvm_assigned_dev_kernel *dev,
-				struct kvm_assigned_irq *irq)
-{
-	dev->guest_irq = irq->guest_irq;
-	dev->ack_notifier.gsi = irq->guest_irq;
-	return 0;
-}
-
-#ifdef __KVM_HAVE_MSI
-static int assigned_device_enable_guest_msi(struct kvm *kvm,
-			struct kvm_assigned_dev_kernel *dev,
-			struct kvm_assigned_irq *irq)
-{
-	dev->guest_irq = irq->guest_irq;
-	dev->ack_notifier.gsi = -1;
-	dev->host_irq_disabled = false;
-	return 0;
-}
-#endif
-#ifdef __KVM_HAVE_MSIX
-static int assigned_device_enable_guest_msix(struct kvm *kvm,
-			struct kvm_assigned_dev_kernel *dev,
-			struct kvm_assigned_irq *irq)
-{
-	dev->guest_irq = irq->guest_irq;
-	dev->ack_notifier.gsi = -1;
-	dev->host_irq_disabled = false;
-	return 0;
-}
-#endif
-
-static int assign_host_irq(struct kvm *kvm,
-			   struct kvm_assigned_dev_kernel *dev,
-			   __u32 host_irq_type)
-{
-	int r = -EEXIST;
-
-	if (dev->irq_requested_type & KVM_DEV_IRQ_HOST_MASK)
-		return r;
-
-	switch (host_irq_type) {
-	case KVM_DEV_IRQ_HOST_INTX:
-		r = assigned_device_enable_host_intx(kvm, dev);
-		break;
-#ifdef __KVM_HAVE_MSI
-	case KVM_DEV_IRQ_HOST_MSI:
-		r = assigned_device_enable_host_msi(kvm, dev);
-		break;
-#endif
-#ifdef __KVM_HAVE_MSIX
-	case KVM_DEV_IRQ_HOST_MSIX:
-		r = assigned_device_enable_host_msix(kvm, dev);
-		break;
-#endif
-	default:
-		r = -EINVAL;
-	}
-
-	if (!r)
-		dev->irq_requested_type |= host_irq_type;
-
-	return r;
-}
-
-static int assign_guest_irq(struct kvm *kvm,
-			    struct kvm_assigned_dev_kernel *dev,
-			    struct kvm_assigned_irq *irq,
-			    unsigned long guest_irq_type)
-{
-	int id;
-	int r = -EEXIST;
-
-	if (dev->irq_requested_type & KVM_DEV_IRQ_GUEST_MASK)
-		return r;
-
-	id = kvm_request_irq_source_id(kvm);
-	if (id < 0)
-		return id;
-
-	dev->irq_source_id = id;
-
-	switch (guest_irq_type) {
-	case KVM_DEV_IRQ_GUEST_INTX:
-		r = assigned_device_enable_guest_intx(kvm, dev, irq);
-		break;
-#ifdef __KVM_HAVE_MSI
-	case KVM_DEV_IRQ_GUEST_MSI:
-		r = assigned_device_enable_guest_msi(kvm, dev, irq);
-		break;
-#endif
-#ifdef __KVM_HAVE_MSIX
-	case KVM_DEV_IRQ_GUEST_MSIX:
-		r = assigned_device_enable_guest_msix(kvm, dev, irq);
-		break;
-#endif
-	default:
-		r = -EINVAL;
-	}
-
-	if (!r) {
-		dev->irq_requested_type |= guest_irq_type;
-		kvm_register_irq_ack_notifier(kvm, &dev->ack_notifier);
-	} else
-		kvm_free_irq_source_id(kvm, dev->irq_source_id);
-
-	return r;
-}
-
-/* TODO Deal with KVM_DEV_IRQ_ASSIGNED_MASK_MSIX */
-static int kvm_vm_ioctl_assign_irq(struct kvm *kvm,
-				   struct kvm_assigned_irq *assigned_irq)
-{
-	int r = -EINVAL;
-	struct kvm_assigned_dev_kernel *match;
-	unsigned long host_irq_type, guest_irq_type;
-
-	if (!capable(CAP_SYS_RAWIO))
-		return -EPERM;
-
-	if (!irqchip_in_kernel(kvm))
-		return r;
-
-	mutex_lock(&kvm->lock);
-	r = -ENODEV;
-	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
-				      assigned_irq->assigned_dev_id);
-	if (!match)
-		goto out;
-
-	host_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_HOST_MASK);
-	guest_irq_type = (assigned_irq->flags & KVM_DEV_IRQ_GUEST_MASK);
-
-	r = -EINVAL;
-	/* can only assign one type at a time */
-	if (hweight_long(host_irq_type) > 1)
-		goto out;
-	if (hweight_long(guest_irq_type) > 1)
-		goto out;
-	if (host_irq_type == 0 && guest_irq_type == 0)
-		goto out;
-
-	r = 0;
-	if (host_irq_type)
-		r = assign_host_irq(kvm, match, host_irq_type);
-	if (r)
-		goto out;
-
-	if (guest_irq_type)
-		r = assign_guest_irq(kvm, match, assigned_irq, guest_irq_type);
-out:
-	mutex_unlock(&kvm->lock);
-	return r;
-}
-
-static int kvm_vm_ioctl_deassign_dev_irq(struct kvm *kvm,
-					 struct kvm_assigned_irq
-					 *assigned_irq)
-{
-	int r = -ENODEV;
-	struct kvm_assigned_dev_kernel *match;
-
-	mutex_lock(&kvm->lock);
-
-	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
-				      assigned_irq->assigned_dev_id);
-	if (!match)
-		goto out;
-
-	r = kvm_deassign_irq(kvm, match, assigned_irq->flags);
-out:
-	mutex_unlock(&kvm->lock);
-	return r;
-}
-
-static int kvm_vm_ioctl_assign_device(struct kvm *kvm,
-				      struct kvm_assigned_pci_dev *assigned_dev)
-{
-	int r = 0;
-	struct kvm_assigned_dev_kernel *match;
-	struct pci_dev *dev;
-
-	down_read(&kvm->slots_lock);
-	mutex_lock(&kvm->lock);
-
-	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
-				      assigned_dev->assigned_dev_id);
-	if (match) {
-		/* device already assigned */
-		r = -EEXIST;
-		goto out;
-	}
-
-	match = kzalloc(sizeof(struct kvm_assigned_dev_kernel), GFP_KERNEL);
-	if (match == NULL) {
-		printk(KERN_INFO "%s: Couldn't allocate memory\n",
-		       __func__);
-		r = -ENOMEM;
-		goto out;
-	}
-	dev = pci_get_bus_and_slot(assigned_dev->busnr,
-				   assigned_dev->devfn);
-	if (!dev) {
-		printk(KERN_INFO "%s: host device not found\n", __func__);
-		r = -EINVAL;
-		goto out_free;
-	}
-	if (pci_enable_device(dev)) {
-		printk(KERN_INFO "%s: Could not enable PCI device\n", __func__);
-		r = -EBUSY;
-		goto out_put;
-	}
-	r = pci_request_regions(dev, "kvm_assigned_device");
-	if (r) {
-		printk(KERN_INFO "%s: Could not get access to device regions\n",
-		       __func__);
-		goto out_disable;
-	}
-
-	pci_reset_function(dev);
-
-	match->assigned_dev_id = assigned_dev->assigned_dev_id;
-	match->host_busnr = assigned_dev->busnr;
-	match->host_devfn = assigned_dev->devfn;
-	match->flags = assigned_dev->flags;
-	match->dev = dev;
-	spin_lock_init(&match->assigned_dev_lock);
-	match->irq_source_id = -1;
-	match->kvm = kvm;
-	match->ack_notifier.irq_acked = kvm_assigned_dev_ack_irq;
-	INIT_WORK(&match->interrupt_work,
-		  kvm_assigned_dev_interrupt_work_handler);
-
-	list_add(&match->list, &kvm->arch.assigned_dev_head);
-
-	if (assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU) {
-		if (!kvm->arch.iommu_domain) {
-			r = kvm_iommu_map_guest(kvm);
-			if (r)
-				goto out_list_del;
-		}
-		r = kvm_assign_device(kvm, match);
-		if (r)
-			goto out_list_del;
-	}
-
-out:
-	mutex_unlock(&kvm->lock);
-	up_read(&kvm->slots_lock);
-	return r;
-out_list_del:
-	list_del(&match->list);
-	pci_release_regions(dev);
-out_disable:
-	pci_disable_device(dev);
-out_put:
-	pci_dev_put(dev);
-out_free:
-	kfree(match);
-	mutex_unlock(&kvm->lock);
-	up_read(&kvm->slots_lock);
-	return r;
-}
-#endif
-
-#ifdef KVM_CAP_DEVICE_DEASSIGNMENT
-static int kvm_vm_ioctl_deassign_device(struct kvm *kvm,
-		struct kvm_assigned_pci_dev *assigned_dev)
-{
-	int r = 0;
-	struct kvm_assigned_dev_kernel *match;
-
-	mutex_lock(&kvm->lock);
-
-	match = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
-				      assigned_dev->assigned_dev_id);
-	if (!match) {
-		printk(KERN_INFO "%s: device hasn't been assigned before, "
-		  "so cannot be deassigned\n", __func__);
-		r = -EINVAL;
-		goto out;
-	}
-
-	if (match->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU)
-		kvm_deassign_device(kvm, match);
-
-	kvm_free_assigned_device(kvm, match);
-
-out:
-	mutex_unlock(&kvm->lock);
-	return r;
-}
-#endif
-
 inline int kvm_is_mmio_pfn(pfn_t pfn)
 {
 	if (pfn_valid(pfn)) {
@@ -950,6 +345,7 @@
 
 static struct kvm *kvm_create_vm(void)
 {
+	int r = 0;
 	struct kvm *kvm = kvm_arch_create_vm();
 #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
 	struct page *page;
@@ -957,16 +353,21 @@
 
 	if (IS_ERR(kvm))
 		goto out;
+
+	r = hardware_enable_all();
+	if (r)
+		goto out_err_nodisable;
+
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
-	INIT_LIST_HEAD(&kvm->irq_routing);
 	INIT_HLIST_HEAD(&kvm->mask_notifier_list);
+	INIT_HLIST_HEAD(&kvm->irq_ack_notifier_list);
 #endif
 
 #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
 	page = alloc_page(GFP_KERNEL | __GFP_ZERO);
 	if (!page) {
-		kfree(kvm);
-		return ERR_PTR(-ENOMEM);
+		r = -ENOMEM;
+		goto out_err;
 	}
 	kvm->coalesced_mmio_ring =
 			(struct kvm_coalesced_mmio_ring *)page_address(page);
@@ -974,15 +375,13 @@
 
 #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
 	{
-		int err;
 		kvm->mmu_notifier.ops = &kvm_mmu_notifier_ops;
-		err = mmu_notifier_register(&kvm->mmu_notifier, current->mm);
-		if (err) {
+		r = mmu_notifier_register(&kvm->mmu_notifier, current->mm);
+		if (r) {
 #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
 			put_page(page);
 #endif
-			kfree(kvm);
-			return ERR_PTR(err);
+			goto out_err;
 		}
 	}
 #endif
@@ -1006,6 +405,12 @@
 #endif
 out:
 	return kvm;
+
+out_err:
+	hardware_disable_all();
+out_err_nodisable:
+	kfree(kvm);
+	return ERR_PTR(r);
 }
 
 /*
@@ -1064,6 +469,7 @@
 	kvm_arch_flush_shadow(kvm);
 #endif
 	kvm_arch_destroy_vm(kvm);
+	hardware_disable_all();
 	mmdrop(mm);
 }
 
@@ -1690,9 +1096,7 @@
 		if (signal_pending(current))
 			break;
 
-		vcpu_put(vcpu);
 		schedule();
-		vcpu_load(vcpu);
 	}
 
 	finish_wait(&vcpu->wq, &wait);
@@ -1706,6 +1110,21 @@
 }
 EXPORT_SYMBOL_GPL(kvm_resched);
 
+void kvm_vcpu_on_spin(struct kvm_vcpu *vcpu)
+{
+	ktime_t expires;
+	DEFINE_WAIT(wait);
+
+	prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
+
+	/* Sleep for 100 us, and hope lock-holder got scheduled */
+	expires = ktime_add_ns(ktime_get(), 100000UL);
+	schedule_hrtimeout(&expires, HRTIMER_MODE_ABS);
+
+	finish_wait(&vcpu->wq, &wait);
+}
+EXPORT_SYMBOL_GPL(kvm_vcpu_on_spin);
+
 static int kvm_vcpu_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct kvm_vcpu *vcpu = vma->vm_file->private_data;
@@ -1829,88 +1248,6 @@
 	return 0;
 }
 
-#ifdef __KVM_HAVE_MSIX
-static int kvm_vm_ioctl_set_msix_nr(struct kvm *kvm,
-				    struct kvm_assigned_msix_nr *entry_nr)
-{
-	int r = 0;
-	struct kvm_assigned_dev_kernel *adev;
-
-	mutex_lock(&kvm->lock);
-
-	adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
-				      entry_nr->assigned_dev_id);
-	if (!adev) {
-		r = -EINVAL;
-		goto msix_nr_out;
-	}
-
-	if (adev->entries_nr == 0) {
-		adev->entries_nr = entry_nr->entry_nr;
-		if (adev->entries_nr == 0 ||
-		    adev->entries_nr >= KVM_MAX_MSIX_PER_DEV) {
-			r = -EINVAL;
-			goto msix_nr_out;
-		}
-
-		adev->host_msix_entries = kzalloc(sizeof(struct msix_entry) *
-						entry_nr->entry_nr,
-						GFP_KERNEL);
-		if (!adev->host_msix_entries) {
-			r = -ENOMEM;
-			goto msix_nr_out;
-		}
-		adev->guest_msix_entries = kzalloc(
-				sizeof(struct kvm_guest_msix_entry) *
-				entry_nr->entry_nr, GFP_KERNEL);
-		if (!adev->guest_msix_entries) {
-			kfree(adev->host_msix_entries);
-			r = -ENOMEM;
-			goto msix_nr_out;
-		}
-	} else /* Not allowed set MSI-X number twice */
-		r = -EINVAL;
-msix_nr_out:
-	mutex_unlock(&kvm->lock);
-	return r;
-}
-
-static int kvm_vm_ioctl_set_msix_entry(struct kvm *kvm,
-				       struct kvm_assigned_msix_entry *entry)
-{
-	int r = 0, i;
-	struct kvm_assigned_dev_kernel *adev;
-
-	mutex_lock(&kvm->lock);
-
-	adev = kvm_find_assigned_dev(&kvm->arch.assigned_dev_head,
-				      entry->assigned_dev_id);
-
-	if (!adev) {
-		r = -EINVAL;
-		goto msix_entry_out;
-	}
-
-	for (i = 0; i < adev->entries_nr; i++)
-		if (adev->guest_msix_entries[i].vector == 0 ||
-		    adev->guest_msix_entries[i].entry == entry->entry) {
-			adev->guest_msix_entries[i].entry = entry->entry;
-			adev->guest_msix_entries[i].vector = entry->gsi;
-			adev->host_msix_entries[i].entry = entry->entry;
-			break;
-		}
-	if (i == adev->entries_nr) {
-		r = -ENOSPC;
-		goto msix_entry_out;
-	}
-
-msix_entry_out:
-	mutex_unlock(&kvm->lock);
-
-	return r;
-}
-#endif
-
 static long kvm_vcpu_ioctl(struct file *filp,
 			   unsigned int ioctl, unsigned long arg)
 {
@@ -2169,112 +1506,6 @@
 		break;
 	}
 #endif
-#ifdef KVM_CAP_DEVICE_ASSIGNMENT
-	case KVM_ASSIGN_PCI_DEVICE: {
-		struct kvm_assigned_pci_dev assigned_dev;
-
-		r = -EFAULT;
-		if (copy_from_user(&assigned_dev, argp, sizeof assigned_dev))
-			goto out;
-		r = kvm_vm_ioctl_assign_device(kvm, &assigned_dev);
-		if (r)
-			goto out;
-		break;
-	}
-	case KVM_ASSIGN_IRQ: {
-		r = -EOPNOTSUPP;
-		break;
-	}
-#ifdef KVM_CAP_ASSIGN_DEV_IRQ
-	case KVM_ASSIGN_DEV_IRQ: {
-		struct kvm_assigned_irq assigned_irq;
-
-		r = -EFAULT;
-		if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq))
-			goto out;
-		r = kvm_vm_ioctl_assign_irq(kvm, &assigned_irq);
-		if (r)
-			goto out;
-		break;
-	}
-	case KVM_DEASSIGN_DEV_IRQ: {
-		struct kvm_assigned_irq assigned_irq;
-
-		r = -EFAULT;
-		if (copy_from_user(&assigned_irq, argp, sizeof assigned_irq))
-			goto out;
-		r = kvm_vm_ioctl_deassign_dev_irq(kvm, &assigned_irq);
-		if (r)
-			goto out;
-		break;
-	}
-#endif
-#endif
-#ifdef KVM_CAP_DEVICE_DEASSIGNMENT
-	case KVM_DEASSIGN_PCI_DEVICE: {
-		struct kvm_assigned_pci_dev assigned_dev;
-
-		r = -EFAULT;
-		if (copy_from_user(&assigned_dev, argp, sizeof assigned_dev))
-			goto out;
-		r = kvm_vm_ioctl_deassign_device(kvm, &assigned_dev);
-		if (r)
-			goto out;
-		break;
-	}
-#endif
-#ifdef KVM_CAP_IRQ_ROUTING
-	case KVM_SET_GSI_ROUTING: {
-		struct kvm_irq_routing routing;
-		struct kvm_irq_routing __user *urouting;
-		struct kvm_irq_routing_entry *entries;
-
-		r = -EFAULT;
-		if (copy_from_user(&routing, argp, sizeof(routing)))
-			goto out;
-		r = -EINVAL;
-		if (routing.nr >= KVM_MAX_IRQ_ROUTES)
-			goto out;
-		if (routing.flags)
-			goto out;
-		r = -ENOMEM;
-		entries = vmalloc(routing.nr * sizeof(*entries));
-		if (!entries)
-			goto out;
-		r = -EFAULT;
-		urouting = argp;
-		if (copy_from_user(entries, urouting->entries,
-				   routing.nr * sizeof(*entries)))
-			goto out_free_irq_routing;
-		r = kvm_set_irq_routing(kvm, entries, routing.nr,
-					routing.flags);
-	out_free_irq_routing:
-		vfree(entries);
-		break;
-	}
-#endif /* KVM_CAP_IRQ_ROUTING */
-#ifdef __KVM_HAVE_MSIX
-	case KVM_ASSIGN_SET_MSIX_NR: {
-		struct kvm_assigned_msix_nr entry_nr;
-		r = -EFAULT;
-		if (copy_from_user(&entry_nr, argp, sizeof entry_nr))
-			goto out;
-		r = kvm_vm_ioctl_set_msix_nr(kvm, &entry_nr);
-		if (r)
-			goto out;
-		break;
-	}
-	case KVM_ASSIGN_SET_MSIX_ENTRY: {
-		struct kvm_assigned_msix_entry entry;
-		r = -EFAULT;
-		if (copy_from_user(&entry, argp, sizeof entry))
-			goto out;
-		r = kvm_vm_ioctl_set_msix_entry(kvm, &entry);
-		if (r)
-			goto out;
-		break;
-	}
-#endif
 	case KVM_IRQFD: {
 		struct kvm_irqfd data;
 
@@ -2306,11 +1537,59 @@
 #endif
 	default:
 		r = kvm_arch_vm_ioctl(filp, ioctl, arg);
+		if (r == -ENOTTY)
+			r = kvm_vm_ioctl_assigned_device(kvm, ioctl, arg);
 	}
 out:
 	return r;
 }
 
+#ifdef CONFIG_COMPAT
+struct compat_kvm_dirty_log {
+	__u32 slot;
+	__u32 padding1;
+	union {
+		compat_uptr_t dirty_bitmap; /* one bit per page */
+		__u64 padding2;
+	};
+};
+
+static long kvm_vm_compat_ioctl(struct file *filp,
+			   unsigned int ioctl, unsigned long arg)
+{
+	struct kvm *kvm = filp->private_data;
+	int r;
+
+	if (kvm->mm != current->mm)
+		return -EIO;
+	switch (ioctl) {
+	case KVM_GET_DIRTY_LOG: {
+		struct compat_kvm_dirty_log compat_log;
+		struct kvm_dirty_log log;
+
+		r = -EFAULT;
+		if (copy_from_user(&compat_log, (void __user *)arg,
+				   sizeof(compat_log)))
+			goto out;
+		log.slot	 = compat_log.slot;
+		log.padding1	 = compat_log.padding1;
+		log.padding2	 = compat_log.padding2;
+		log.dirty_bitmap = compat_ptr(compat_log.dirty_bitmap);
+
+		r = kvm_vm_ioctl_get_dirty_log(kvm, &log);
+		if (r)
+			goto out;
+		break;
+	}
+	default:
+		r = kvm_vm_ioctl(filp, ioctl, arg);
+	}
+
+out:
+	return r;
+}
+#endif
+
 static int kvm_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct page *page[1];
@@ -2345,7 +1624,9 @@
 static struct file_operations kvm_vm_fops = {
 	.release        = kvm_vm_release,
 	.unlocked_ioctl = kvm_vm_ioctl,
-	.compat_ioctl   = kvm_vm_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl   = kvm_vm_compat_ioctl,
+#endif
 	.mmap           = kvm_vm_mmap,
 };
 
@@ -2373,6 +1654,7 @@
 #ifdef CONFIG_KVM_APIC_ARCHITECTURE
 	case KVM_CAP_SET_BOOT_CPU_ID:
 #endif
+	case KVM_CAP_INTERNAL_ERROR_DATA:
 		return 1;
 #ifdef CONFIG_HAVE_KVM_IRQCHIP
 	case KVM_CAP_IRQ_ROUTING:
@@ -2443,11 +1725,21 @@
 static void hardware_enable(void *junk)
 {
 	int cpu = raw_smp_processor_id();
+	int r;
 
 	if (cpumask_test_cpu(cpu, cpus_hardware_enabled))
 		return;
+
 	cpumask_set_cpu(cpu, cpus_hardware_enabled);
-	kvm_arch_hardware_enable(NULL);
+
+	r = kvm_arch_hardware_enable(NULL);
+
+	if (r) {
+		cpumask_clear_cpu(cpu, cpus_hardware_enabled);
+		atomic_inc(&hardware_enable_failed);
+		printk(KERN_INFO "kvm: enabling virtualization on "
+				 "CPU%d failed\n", cpu);
+	}
 }
 
 static void hardware_disable(void *junk)
@@ -2460,11 +1752,52 @@
 	kvm_arch_hardware_disable(NULL);
 }
 
+static void hardware_disable_all_nolock(void)
+{
+	BUG_ON(!kvm_usage_count);
+
+	kvm_usage_count--;
+	if (!kvm_usage_count)
+		on_each_cpu(hardware_disable, NULL, 1);
+}
+
+static void hardware_disable_all(void)
+{
+	spin_lock(&kvm_lock);
+	hardware_disable_all_nolock();
+	spin_unlock(&kvm_lock);
+}
+
+static int hardware_enable_all(void)
+{
+	int r = 0;
+
+	spin_lock(&kvm_lock);
+
+	kvm_usage_count++;
+	if (kvm_usage_count == 1) {
+		atomic_set(&hardware_enable_failed, 0);
+		on_each_cpu(hardware_enable, NULL, 1);
+
+		if (atomic_read(&hardware_enable_failed)) {
+			hardware_disable_all_nolock();
+			r = -EBUSY;
+		}
+	}
+
+	spin_unlock(&kvm_lock);
+
+	return r;
+}
+
 static int kvm_cpu_hotplug(struct notifier_block *notifier, unsigned long val,
 			   void *v)
 {
 	int cpu = (long)v;
 
+	if (!kvm_usage_count)
+		return NOTIFY_OK;
+
 	val &= ~CPU_TASKS_FROZEN;
 	switch (val) {
 	case CPU_DYING:
@@ -2667,13 +2000,15 @@
 
 static int kvm_suspend(struct sys_device *dev, pm_message_t state)
 {
-	hardware_disable(NULL);
+	if (kvm_usage_count)
+		hardware_disable(NULL);
 	return 0;
 }
 
 static int kvm_resume(struct sys_device *dev)
 {
-	hardware_enable(NULL);
+	if (kvm_usage_count)
+		hardware_enable(NULL);
 	return 0;
 }
 
@@ -2748,7 +2083,6 @@
 			goto out_free_1;
 	}
 
-	on_each_cpu(hardware_enable, NULL, 1);
 	r = register_cpu_notifier(&kvm_cpu_notifier);
 	if (r)
 		goto out_free_2;
@@ -2798,7 +2132,6 @@
 	unregister_reboot_notifier(&kvm_reboot_notifier);
 	unregister_cpu_notifier(&kvm_cpu_notifier);
 out_free_2:
-	on_each_cpu(hardware_disable, NULL, 1);
 out_free_1:
 	kvm_arch_hardware_unsetup();
 out_free_0a: